WorldWideScience

Sample records for technology continues apace

  1. Automated Program Analysis for Cybersecurity (APAC)

    Science.gov (United States)

    2016-07-14

    AUTOMATED PROGRAM ANALYSIS FOR CYBERSECURITY ( APAC ) FIVE DIRECTIONS, INC JULY 2016 FINAL TECHNICAL REPORT APPROVED...CYBERSECURITY ( APAC ) 5a. CONTRACT NUMBER FA8750-14-C-0050 5b. GRANT NUMBER N/A 5c. PROGRAM ELEMENT NUMBER 61101E 6. AUTHOR(S) William Arbaugh...5d. PROJECT NUMBER APAC 5e. TASK NUMBER SD 5f. WORK UNIT NUMBER IR 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Five Directions, Inc

  2. APACS: Monitoring and diagnosis of complex processes

    International Nuclear Information System (INIS)

    Kramer, B.M.; Mylopoulos, J.; Cheng Wang

    1994-01-01

    This paper describes APACS - a new framework for a system that detects, predicts and identifies faults in industrial processes. The APACS frameworks provides a structure in which a heterogeneous set of programs can share a common view of the problem and a common model of the domain. (author). 17 refs, 2 figs

  3. Final report of the accident phenomenology and consequence (APAC) methodology evaluation. Spills Working Group

    Energy Technology Data Exchange (ETDEWEB)

    Brereton, S.; Shinn, J. [Lawrence Livermore National Lab., CA (United States); Hesse, D [Battelle Columbus Labs., OH (United States); Kaninich, D. [Westinghouse Savannah River Co., Aiken, SC (United States); Lazaro, M. [Argonne National Lab., IL (United States); Mubayi, V. [Brookhaven National Lab., Upton, NY (United States)

    1997-08-01

    The Spills Working Group was one of six working groups established under the Accident Phenomenology and Consequence (APAC) methodology evaluation program. The objectives of APAC were to assess methodologies available in the accident phenomenology and consequence analysis area and to evaluate their adequacy for use in preparing DOE facility safety basis documentation, such as Basis for Interim Operation (BIO), Justification for Continued Operation (JCO), Hazard Analysis Documents, and Safety Analysis Reports (SARs). Additional objectives of APAC were to identify development needs and to define standard practices to be followed in the analyses supporting facility safety basis documentation. The Spills Working Group focused on methodologies for estimating four types of spill source terms: liquid chemical spills and evaporation, pressurized liquid/gas releases, solid spills and resuspension/sublimation, and resuspension of particulate matter from liquid spills.

  4. Learning Technologies for Adult Continuing Education

    Science.gov (United States)

    Mason, Robin

    2006-01-01

    This paper discusses three technologies used in an adult continuing education Masters programme: blogging, learning objects and e-portfolios. My reflections on their use and on the literature underpinning their use form the basis of the discussion. All three of these technologies were used to promote self-directed learning, reflection and learner…

  5. Dual antiplatelet and anticoagulant APAC prevents experimental ischemia-reperfusion-induced acute kidney injury.

    Science.gov (United States)

    Tuuminen, Raimo; Jouppila, Annukka; Salvail, Dan; Laurent, Charles-E; Benoit, Marie-Claude; Syrjälä, Simo; Helin, Heikki; Lemström, Karl; Lassila, Riitta

    2017-06-01

    Renal ischemia-reperfusion predisposes to acute kidney injury (AKI) and mortality. APAC, mast cell heparin proteoglycan mimetic is a potent dual antiplatelet and anticoagulant inhibiting thrombosis in several vascular models. Clinically relevant (0.06 and 0.13 mg/kg) and high (0.32 and 7.3 mg/kg) heparin doses of APAC and unfractionated heparin (UFH) were administered i.v. in pharmacological studies. Antithrombotic action of APAC and UFH was assessed with platelet aggregation to collagen, activated partial thromboplastin (APTT) and prothrombin (PT) times. Pharmacodynamics of [ 64 Cu]-APAC or -UFH were monitored by PET/CT. Next, APAC and UFH doses (0.06 and 0.13 mg/kg) were i.v. administered 10 min prior to renal ischemia-reperfusion injury (IRI) in rats. APAC in contrast to UFH inhibited platelet aggregation. During 0.06 and 0.13 mg/kg dose regimens APTT and PT remained at baseline, but at the high APTT prolonged fourfold to sixfold. Overall bio-distribution and clearance of APAC and UFH were similar. After bilateral 30-min renal artery clamping, creatinine, urea nitrogen and neutrophil gelatinase-associated lipocalin concentrations and histopathology indicated faster renal recovery by APAC (0.13 mg/kg). APAC, unlike UFH, prevented expression of innate immune ligand hyaluronan and tubulointerstitial injury marker Kim-1. Moreover, in severe bilateral 1-h renal artery clamping, APAC (0.13 mg/kg) prevented AKI, as demonstrated both by biomarkers and survival. Compatible with kidney protection APAC reduced the circulating levels of vascular destabilizing and pro-inflammatory angiopoietin-2 and syndecan-1. No tissue bleeding ensued. APAC and UFH were similarly eliminated via kidneys and liver. In contrast to UFH, APAC (0.13 mg/kg) was reno-protective in moderate and even severe IRI by attenuating vascular injury and innate immune activation.

  6. Using modern information technologies in continuing education

    Directory of Open Access Journals (Sweden)

    Магомедхан Магомедович Ниматулаев

    2012-06-01

    Full Text Available Article opens problems of formation of system of continuous education and improvement of professional skill for effective realization of professional work of the teacher in the conditions of use of modern information technology. Possibilities and necessities of use of information-communication technologies, Web-technologies for an intensification and giving of additional dynamics to educational process are considered. In this connection new forms and methods of the organization of educational activity for development and perfection of this activity are defined.

  7. Continuation of Crosscutting Technology Development at Cast

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Roe-Hoan

    2012-03-31

    This Final Technical Report describes progress made on the sub-projects awarded in the Cooperative Agreement DE-FC26-05NT42457: Continuation of Crosscutting Technology Development at Center for Advanced Separation Technologies (CAST). The final reports for each sub-project are attached in the appendix. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: a) Solid-solid separation b) Solid-liquid separation c) Chemical/Biological Extraction d) Modeling and Control, and e) Environmental Control.

  8. Plasmodium falciparum malariometric indices in Apac district, northern Uganda.

    Science.gov (United States)

    Egwang, T G; Apio, B; Riley, E; Okello, D

    2000-08-01

    To establish Plasmodium falciparum malariometric indices in a field study site in Apac district, northern Uganda. A community-based cross sectional survey. Atopi Parish, Apac district, Uganda, 1995. One thousand two hundred and thirty four volunteers aged below one and ninety years. P. falciparum parasitaemia rates and parasite density, splenomegaly, bednet use and chloroquine consumption. All subjects with P. falciparum positive smears were treated with chloroquine. The population prevalence of parasitaemia was 62.1% with the predominant species being P. falciparum (100%) and P. malariae in the minority (3.5%); P. ovale was not seen. The prevalence of parasitaemia in subjects older than 20 years and in those under ten years was 36% and 85%, respectively. The geometric mean parasite density started to decline by the age of six years. The splenomegaly rate in subjects over the age of 12 years and in those under nine years was 19.8% and 63.1%, respectively. Bednet use and chloroquine consumption was low. Interestingly, the reported use of chloroquine in the week immediately preceding the study was more frequent in children under two years old than in the rest of the population. Malaria transmission in Atopi Parish in northern Uganda is hyperendemic and age-related acquired anti-parasite immunity seems to appear by seven years of age.

  9. Factors Affecting Teachers' Continuation of Technology Use in Teaching

    Science.gov (United States)

    Kafyulilo, Ayoub; Fisser, Petra; Voogt, Joke

    2016-01-01

    This study was conducted to investigate the continuation of technology use in science and mathematics teaching of the teachers who attended a professional development program between 2010 and 2012. Continuation of technology use was hypothesized to be affected by the professional development program and by personal, institutional, and…

  10. Factors affecting teachers’ continuation of technology use in teaching

    NARCIS (Netherlands)

    Kafyulilo, A.; Fisser, P.; Voogt, J.

    2016-01-01

    This study was conducted to investigate the continuation of technology use in science and mathematics teaching of the teachers who attended a professional development program between 2010 and 2012. Continuation of technology use was hypothesized to be affected by the professional development program

  11. Continuous aqueous tritium monitor applying membrane technology

    International Nuclear Information System (INIS)

    Sigg, R.A.

    1992-01-01

    Efforts to develop continuous, real-time tritium monitors are focusing on liquid scintillation (LS) counting because its sensitivity for tritium can be below Environmental Protection Agency guidelines (20 pCi/ml). A flow-through LS counter should have a counting efficiency = 0.48, instrumental backgrounds = 5 count/min counting cell volume = 5 ml, and sample water loading capacities = 15 wt%. The system would offer minimum quantifiable activities at the ±10% level of <18 pCi/ml in a 10-min count or <1 pCi/ml if data are averaged for 1 day. The latter value is below the tritium background of surface waters worldwide. However, good time response in a flow-through LS monitor requires flow rates of at least several milliliters per minute. Such a single-pass system would consume large volumes of expensive LS cocktail, and it would generate notable amounts of mixed organic waste

  12. Next wave EM technology : Electromagnetic communication technology continues to progress

    International Nuclear Information System (INIS)

    Ludwick, J.

    1998-01-01

    Alpine Oil Services Corp. and Ryan Energy Technologies Inc., have made technological advances in the use of real time electromagnetic (EM) data transmission, using low frequency radio waves to transmit well commands or geological information. The development of the telemetry activated tool was done in two steps. The first technology was real time EM data transmission from the subsurface which used the wellbore to transfer information. The second step was constructing a memory pack which involved an electronic instrument installed in the wellbore which was programmed to perform certain tasks at certain times by transmitting signals back and forth. The use of EM communication allows the geological steering information to come back faster. The EM signal is much faster compared to MWD systems for deeper directional wells. The EM technology also has immediate applications in underbalanced drilling. 1 fig

  13. Assistive Technology Instruction within a Continuously Evolving Technology Environment

    Science.gov (United States)

    Peterson-Karlan, George R.

    2015-01-01

    The movement toward greater availability of online education in the university setting creates challenges for design, development, and implementation of online courses, particularly those focused on the educational use of technology as content. This article is structured around a central theme of designing and implementing hybrid online courses…

  14. Synthetic Biology and the Argument from Continuity with Established Technologies

    DEFF Research Database (Denmark)

    Christiansen, Andreas

    2015-01-01

    ) that it ignores the distinction between what reasons we have and what we should do all things considered. I then illustrate the Continuity Argument and its problems in the case where human manipulation of organisms’ genetic makeup is a suggested reason for finding synthetic biology problematic. Finally, I suggest......Defenders of synthetic biology commonly make reference to the fact that established technologies, such as domestication or selective breeding, share some of the features of synthetic biology that critics argue make it ethically problematic. In this chapter, I reconstruct such references...... as instances of a type of argument which I dub the Continuity Argument. Roughly, the Continuity Argument seeks to show that if we are not disposed to reject the established technology, then features that this technology share with synthetic biology cannot provide reasons to find it ethically problematic. I...

  15. A Test for the Assessment of Pragmatic Abilities and Cognitive Substrates (APACS): Normative Data and Psychometric Properties.

    Science.gov (United States)

    Arcara, Giorgio; Bambini, Valentina

    2016-01-01

    The Assessment of Pragmatic Abilities and Cognitive Substrates (APACS) test is a new tool to evaluate pragmatic abilities in clinical populations with acquired communicative deficits, ranging from schizophrenia to neurodegenerative diseases. APACS focuses on two main domains, namely discourse and non-literal language, combining traditional tasks with refined linguistic materials in Italian, in a unified framework inspired by language pragmatics. The test includes six tasks (Interview, Description, Narratives, Figurative Language 1, Humor, Figurative Language 2) and three composite scores (Pragmatic Productions, Pragmatic Comprehension, APACS Total). Psychometric properties and normative data were computed on a sample of 119 healthy participants representative of the general population. The analysis revealed acceptable internal consistency and good test-retest reliability for almost every APACS task, suggesting that items are coherent and performance is consistent over time. Factor analysis supports the validity of the test, revealing two factors possibly related to different facets and substrates of the pragmatic competence. Finally, excellent match between APACS items and scores and the pragmatic constructs measured in the test was evidenced by experts' evaluation of content validity. The performance on APACS showed a general effect of demographic variables, with a negative effect of age and a positive effect of education. The norms were calculated by means of state-of-the-art regression methods. Overall, APACS is a valuable tool for the assessment of pragmatic deficits in verbal communication. The short duration and easiness of administration make the test especially suitable to use in clinical settings. In presenting APACS, we also aim at promoting the inclusion of pragmatics in the assessment practice, as a relevant dimension in defining the patient's cognitive profile, given its vital role for communication and social interaction in daily life. The combined

  16. A Test for the Assessment of Pragmatic Abilities and Cognitive Substrates (APACS): Normative Data and Psychometric Properties

    Science.gov (United States)

    Arcara, Giorgio; Bambini, Valentina

    2016-01-01

    The Assessment of Pragmatic Abilities and Cognitive Substrates (APACS) test is a new tool to evaluate pragmatic abilities in clinical populations with acquired communicative deficits, ranging from schizophrenia to neurodegenerative diseases. APACS focuses on two main domains, namely discourse and non-literal language, combining traditional tasks with refined linguistic materials in Italian, in a unified framework inspired by language pragmatics. The test includes six tasks (Interview, Description, Narratives, Figurative Language 1, Humor, Figurative Language 2) and three composite scores (Pragmatic Productions, Pragmatic Comprehension, APACS Total). Psychometric properties and normative data were computed on a sample of 119 healthy participants representative of the general population. The analysis revealed acceptable internal consistency and good test-retest reliability for almost every APACS task, suggesting that items are coherent and performance is consistent over time. Factor analysis supports the validity of the test, revealing two factors possibly related to different facets and substrates of the pragmatic competence. Finally, excellent match between APACS items and scores and the pragmatic constructs measured in the test was evidenced by experts' evaluation of content validity. The performance on APACS showed a general effect of demographic variables, with a negative effect of age and a positive effect of education. The norms were calculated by means of state-of-the-art regression methods. Overall, APACS is a valuable tool for the assessment of pragmatic deficits in verbal communication. The short duration and easiness of administration make the test especially suitable to use in clinical settings. In presenting APACS, we also aim at promoting the inclusion of pragmatics in the assessment practice, as a relevant dimension in defining the patient's cognitive profile, given its vital role for communication and social interaction in daily life. The combined

  17. Risk Evaluation of Business Continuity Management by Using Green Technology

    Science.gov (United States)

    Gang, Chen

    IT disasters can be seen as the test of the ability in communities and firms to effectively protect their information and infrastructure, to reduce both human and property loss, and to rapidly recover. In this paper, we use a literature meta-analysis method to identify potential research directions in Green Business Continuity Management (GBCM). The concept and characteristics of GBCM are discussed. We analysis the connotation and the sources of green technology risk. An assessment index system is established from the perspectives of GBCM. A fuzzy comprehensive assessment method is introduced to assess the risks of green technology in Business Continuity Management.

  18. A propulsion technology challenge — An abortable. Continuous use vehicle

    Science.gov (United States)

    Czysz, Paul A.; Froning, H. David

    1996-02-01

    Propulsion is the enabling technology for an abortable, continuous use vehicle. Propulsion performance purchases margin in the other material, structural, and system requirements. But what is abortability, and continuous use? Why is it necessary? What are its characteristics? And, what specifically is required in the propulsion system to enable these characteristics? Is the cost of the launcher really trivial, or is that the incomplete cost analysis limited to expendables and rebuilt, reusables. This paper identifies what constitutes an abortable, continuous use vehicle, the propulsion characteristics required, and the technology necessary to provide those characteristics. The proposition resulting is that this is not a technology issue, it is a concept of operation and a bureaucratic issue. The required goal is not as distant as some might propose, and the technology not as unprepared for commercial application as some assumed. The conclusion is that clearly we cannot continue to base the next century's orbital operations on an expendable rebuilt for reuse concept. What is required is a rocket based combined cycle (RBCC) engine based on those now in space operation 1,2; not a combination of cycles that remains to be shown as a practical, achievable reality.

  19. Continuous-Flow Biochips: Technology, Physical Design Methods and Testing

    DEFF Research Database (Denmark)

    Pop, Paul; Araci, Ismail Emre; Chakrabarty, Krishnendu

    2015-01-01

    This article is a tutorial on continuous-flow biochips where the basic building blocks are microchannels, and microvalves, and by combining them, more complex units such as mixers, switches, and multiplexers can be built. It also presents the state of the art in flow-based biochip technology...

  20. Continuous nonlinear optimization for engineering applications in GAMS technology

    CERN Document Server

    Andrei, Neculai

    2017-01-01

    This book presents the theoretical details and computational performances of algorithms used for solving continuous nonlinear optimization applications imbedded in GAMS. Aimed toward scientists and graduate students who utilize optimization methods to model and solve problems in mathematical programming, operations research, business, engineering, and industry, this book enables readers with a background in nonlinear optimization and linear algebra to use GAMS technology to understand and utilize its important capabilities to optimize algorithms for modeling and solving complex, large-scale, continuous nonlinear optimization problems or applications. Beginning with an overview of constrained nonlinear optimization methods, this book moves on to illustrate key aspects of mathematical modeling through modeling technologies based on algebraically oriented modeling languages. Next, the main feature of GAMS, an algebraically oriented language that allows for high-level algebraic representation of mathematical opti...

  1. Database mirroring in fault-tolerant continuous technological process control

    Directory of Open Access Journals (Sweden)

    R. Danel

    2015-10-01

    Full Text Available This paper describes the implementations of mirroring technology of the selected database systems – Microsoft SQL Server, MySQL and Caché. By simulating critical failures the systems behavior and their resilience against failure were tested. The aim was to determine whether the database mirroring is suitable to use in continuous metallurgical processes for ensuring the fault-tolerant solution at affordable cost. The present day database systems are characterized by high robustness and are resistant to sudden system failure. Database mirroring technologies are reliable and even low-budget projects can be provided with a decent fault-tolerant solution. The database system technologies available for low-budget projects are not suitable for use in real-time systems.

  2. All-printed capacitors with continuous solution dispensing technology

    Science.gov (United States)

    Ge, Yang; Plötner, Matthias; Berndt, Andreas; Kumar, Amit; Voit, Brigitte; Pospiech, Doris; Fischer, Wolf-Joachim

    2017-09-01

    Printed electronics have been introduced into the commercial markets in recent years. Various printing technologies have emerged aiming to process printed electronic devices with low cost, environmental friendliness, and compatibility with large areas and flexible substrates. The aim of this study is to propose a continuous solution dispensing technology for processing all-printed thin-film capacitors on glass substrates using a leading-edge printing instrument. Among all printing technologies, this study provides concrete proof of the following outstanding advantages of this technology: high tolerance to inks, high throughput, low cost, and precise pattern transfers. Ag nanoparticle ink based on glycol ethers was used to print the electrodes. To obtain dielectric ink, a copolymer powder of poly(methyl methacrylate-co-benzoylphenyl methacrylate) containing crosslinkable side groups was dissolved in anisole. Various layouts were designed to support multiple electronic applications. Scanning electron microscopy and atomic force microscopy were used to investigate the all-printed capacitor layers formed using the proposed process. Additionally, the printed capacitors were electrically characterized under direct current and alternating current. The measured electrical properties of the printed capacitors were consistent with the theoretical results.

  3. Asymptomatic polyvascular abnormalities in community (APAC study in China: objectives, design and baseline characteristics.

    Directory of Open Access Journals (Sweden)

    Yong Zhou

    Full Text Available OBJECTIVE: The population-based "Asymptomatic Polyvascular Abnormalities in Community (APAC Study was designed to examine prevalence and associations of asymptomatic polyvascular abnormalities (APA in a general population. In this report, the objectives, design and baseline data of the APAC study are described. METHODS: The study included 5,440 participants (40.1% women with an age of 40+ years who were randomly selected from the population of the Kailuan Study which included 101,510 employees and retirees of the Kailuan Co. Ltd, a large coal mine industry located in Tangshan, Hebei, China. Exclusion criteria were previous cerebral stroke, transient ischemic attacks and coronary heart disease. In 2010 and 2011, information on potential cardiovascular risk factors was collected and all participants underwent transcranial Doppler sonography, measurement of the ankle brachial index, and bilateral carotid duplex sonography. In a first follow-up examination in 2012/2013, retinal photography and spectral-domain optical coherence tomography were additionally performed. In a planned long-term follow-up, data from clinical examinations and laboratory tests and the occurrence of cardiovascular or cerebrovascular events will be collected to build up a predicting model for the risk of ischemic events. RESULTS: At baseline, mean age of the participants was 55.2 ± 11.8 years, and men showed a significantly (P<0.001 higher prevalence of arterial hypertension (55.5% vs. 36.5% and hyperlipidemia (50.7% vs. 46.0% and a higher blood homocysteine concentration (18.68 ± 10.28 µmol/L versus 11.69 ± 6.40 µmol/L. CONCLUSIONS: The APAC is the first study to prospectively evaluate the relationship between intracranial arterial stenosis, retinal nerve fiber layer changes, retinal microvascular signs, and the eventual development of cerebrovascular or cardiovascular events.

  4. Applications of current technology for continuous monitoring of spent fuel

    International Nuclear Information System (INIS)

    Drayer, R.

    2013-01-01

    Advancements in technology have opened many opportunities to improve upon the current infrastructure surrounding the nuclear fuel cycle. Embedded devices, very small sensors, and wireless technology can be applied to Security, Safety, and Nonproliferation of Spent Nuclear Fuel. Security, separate of current video monitoring systems, can be improved by integrating current wireless technology with a variety of sensors including motion detection, altimeter, accelerometer, and a tagging system. By continually monitoring these sensors, thresholds can be set to sense deviations from nominal values. Then alarms or notifications can be activated as needed. Safety can be improved in several ways. First, human exposure to ionizing radiation can be reduced by using a wireless sensor package on each spent fuel cask to monitor radiation, temperature, humidity, etc. Since the sensor data is monitored remotely operator stay-time is decreased and distance from the spent fuel increased, so the overall radiation exposure is reduced as compared to visual inspections. The second improvement is the ability to monitor continuously rather than periodically. If changes occur to the material, alarm thresholds could be set and notifications made to provide advanced notice of negative data trends. These sensor packages could also record data to be used for scientific evaluation and studies to improve transportation and storage safety. Nonproliferation can be improved for spent fuel transportation and storage by designing an integrated tag that uses current infrastructure for reporting and in an event; tracking can be accomplished using the Iridium satellite system. This technology is similar to GPS but with higher signal strength and penetration power, but lower accuracy. A sensor package can integrate all or some of the above depending on the transportation and storage requirements and regulations. A sensor package can be developed using off the shelf technology and applying it to each

  5. APPLICATIONS OF CURRENT TECHNOLOGY FOR CONTINUOUS MONITORING OF SPENT FUEL

    Energy Technology Data Exchange (ETDEWEB)

    Drayer, R.

    2013-06-09

    Advancements in technology have opened many opportunities to improve upon the current infrastructure surrounding the nuclear fuel cycle. Embedded devices, very small sensors, and wireless technology can be applied to Security, Safety, and Nonproliferation of Spent Nuclear Fuel. Security, separate of current video monitoring systems, can be improved by integrating current wireless technology with a variety of sensors including motion detection, altimeter, accelerometer, and a tagging system. By continually monitoring these sensors, thresholds can be set to sense deviations from nominal values. Then alarms or notifications can be activated as needed. Safety can be improved in several ways. First, human exposure to ionizing radiation can be reduced by using a wireless sensor package on each spent fuel cask to monitor radiation, temperature, humidity, etc. Since the sensor data is monitored remotely operator stay-time is decreased and distance from the spent fuel increased, so the overall radiation exposure is reduced as compared to visual inspections. The second improvement is the ability to monitor continuously rather than periodically. If changes occur to the material, alarm thresholds could be set and notifications made to provide advanced notice of negative data trends. These sensor packages could also record data to be used for scientific evaluation and studies to improve transportation and storage safety. Nonproliferation can be improved for spent fuel transportation and storage by designing an integrated tag that uses current infrastructure for reporting and in an event; tracking can be accomplished using the Iridium satellite system. This technology is similar to GPS but with higher signal strength and penetration power, but lower accuracy. A sensor package can integrate all or some of the above depending on the transportation and storage requirements and regulations. A sensor package can be developed using off the shelf technology and applying it to each

  6. Storytelling: a care technology in continuing education for active ageing.

    Science.gov (United States)

    Costa, Nadia Pinheiro da; Polaro, Sandra Helena Isse; Vahl, Eloá Aparecida Caliari; Gonçalves, Lucia Hisako Takase

    2016-01-01

    assessing relevance and effectiveness of care/educational technology in the form of "storytelling" as a strategy in the cultivation of active ageing (AA) for elderly users of a Basic Health Unit (BHU), from the Amazon region. convergent care research (CCR) held in a BHU in Belém, state of Pará, with eight elderly ladies for testing this technology. An active ageing assessment questionnaire and WHOQOL-BREF - quality of life assessment were applied. After training with a view to continuing education, elderly ladies told stories for an audience that addressed the question: "What did you learn from it for your life?" tThe popular stories elicited reactions from which the following categories emerged: solidarity; respect for the other; imagination, dreams, hopes and culture of the Amazonian. This practice had a positive result, producing changes in the quality of life of the elderly, particularly in the psychological domain. "storytelling" proved to be an innovative technology, a relevant and effective resource in health education, especially for active ageing.

  7. Specificity of continuous auditing approach on information technology internal controls

    Directory of Open Access Journals (Sweden)

    Kaćanski Slobodan

    2012-01-01

    Full Text Available Contemporary business world, can not be imagined without the use of information technology in all aspects of business. The use of information technology in manufacturing and non-production companies' activities can greatly facilitate and accelerate the process of operation and control. Because of its complexity, they possess vulnerable areas and provide space for the emergence of accidental and intentional frauds that can significantly materially affect the business decisions made by the companies' management. Implementation of internal controls can greatly reduce the level of errors that can contribute to making the wrong decisions. In order to protect the operating system, the company's management implement an internal audit to periodically examine the fundamental quality of the internal control systems. Since the internal audit, according to its character, only periodically checks quality of internal control systems and information technologies to be reported to the manager, the problem arises in the process of in wrong time reporting the management structures of the business entity. To eliminate this problem, management implements a special approach to internal audit, called continuous auditing.

  8. Continuing Science and Technology at the Proposed Yucca Mountain Repository

    International Nuclear Information System (INIS)

    Finch, R.J.

    2005-01-01

    Yucca Mountain, Nevada, was designated in 2002 to be the site for the nation's first permanent geological repository for spent nuclear fuel and high-level radioactive waste. The process of selecting a site for the repository began nearly 25 years ago with passage of the Nuclear Waste Policy Act in 1982. The Department of Energy (DOE) is responsible for submitting a license application to the Nuclear Regulatory Commission for constructing and operating the repository, and DOE's Office of Civilian Radioactive Waste Management (OCRWM) is charged with carrying out this action. The use of multiple natural and engineered barriers in the current repository design are considered by OCRWM to be sufficiently robust to warrant license approval; however, potential design enhancements and increased understanding of both natural and engineered barriers, especially over the long time frames during which the waste is to remain isolated from human contact continue to be examined. The Office of Science and Technology and International (OST andI) was created within OCRWM to help explore novel technologies that might lower overall costs and to develop a greater understanding of processes relevant to the long-term performance of the repository. A brief overview of Yucca Mountain, and the role that OST andI has in identifying technological or scientific advances that could make repository operations more efficient or performance more robust, will be presented. It is important to note, however, that adopting any of OST andI's technological or scientific developments will be at the discretion of OCRWM's Office of Repository Development (ORD)

  9. Asymptomatic polyvascular abnormalities in community (APAC) study in China: objectives, design and baseline characteristics.

    Science.gov (United States)

    Zhou, Yong; Li, Yang; Xu, Liang; Xu, Jie; Wang, Anxin; Wang, Anxing; Gao, Xiang; Wu, Shouling; Wei, Wen Bin; Zhao, Xingquan; Jonas, Jost B

    2013-01-01

    The population-based "Asymptomatic Polyvascular Abnormalities in Community (APAC) Study was designed to examine prevalence and associations of asymptomatic polyvascular abnormalities (APA) in a general population. In this report, the objectives, design and baseline data of the APAC study are described. The study included 5,440 participants (40.1% women) with an age of 40+ years who were randomly selected from the population of the Kailuan Study which included 101,510 employees and retirees of the Kailuan Co. Ltd, a large coal mine industry located in Tangshan, Hebei, China. Exclusion criteria were previous cerebral stroke, transient ischemic attacks and coronary heart disease. In 2010 and 2011, information on potential cardiovascular risk factors was collected and all participants underwent transcranial Doppler sonography, measurement of the ankle brachial index, and bilateral carotid duplex sonography. In a first follow-up examination in 2012/2013, retinal photography and spectral-domain optical coherence tomography were additionally performed. In a planned long-term follow-up, data from clinical examinations and laboratory tests and the occurrence of cardiovascular or cerebrovascular events will be collected to build up a predicting model for the risk of ischemic events. At baseline, mean age of the participants was 55.2 ± 11.8 years, and men showed a significantly (PAPAC is the first study to prospectively evaluate the relationship between intracranial arterial stenosis, retinal nerve fiber layer changes, retinal microvascular signs, and the eventual development of cerebrovascular or cardiovascular events.

  10. Punctuated continuity: The technological trajectory of advanced biomass gasifiers

    International Nuclear Information System (INIS)

    Kirkels, Arjan F.

    2014-01-01

    Recent interest in biofuels and bio-refineries has been building upon the technology of biomass gasification. This technology developed since the 1980s in three periods, but failed to break through. We try to explain this by studying the technological development from a quasi-evolutionary perspective, drawing upon the concepts of technological paradigms and technological trajectories. We show that the socio-economic context was most important, as it both offered windows of opportunity as well as provided direction to developments. Changes in this context resulted in paradigm shifts, characterized by a change in considered end-products and technologies, as well as a change in companies involved. Other influences on the technological trajectory were firm specific differences, like the focus on a specific feedstock, scale and more recently biofuels to be produced. These were strengthened by the national focus of supporting policies, as well as specific attention for multiple technologies in policies of the USA and European Commission. Over each period we see strong variation that likely benefitted the long term development of the technology. Despite policy efforts that included variation and institutionalization, our case shows that the large changes in socio-economic context and the technological challenges were hard to overcome. - Highlights: • Advanced biomass gasification, as important enabling technology for biofuels and the bio-based economy, has been lacking success despite decades of research and development. • We try to explain this by reconstructing its technological trajectory. • We focus on processes of variation and selection, and interaction between local demonstration projects and the upcoming technological field. • The development of the technology over each period shows strong variation. • Long RD and D times in combination with major changes in the socio-economic context have resulted in discontinuities that even affected premium

  11. A continuing program for technology transfer to the apparel industry

    Science.gov (United States)

    Clingman, W. H.

    1971-01-01

    A six month program has been carried out to investigate various mechanisms for transferring technology to industry. This program has focused on transfer to the apparel industry through the Apparel Research Foundation. The procedure was to analyze the problem, obtain potentially relevant aerospace technology, and then transfer this technology to the industry organization. This was done in a specific case. Technology was identified relevant to stitchless joining, and this technology was transferred to the Apparel Research Foundation. The feasibility and ground rules for carrying out such activities on a broader scale were established. A specific objective was to transfer new technology from the industry organization to the industry itself. This required the establishment of an application engineering program. Another transfer mechanism tested was publication of solutions to industry problems in a format familiar to the industry. This is to be distinguished from circulating descriptions of new technology. Focus is on the industry problem and the manager is given a formula for solving it that he can follow. It was concluded that this mechanism can complement the problem statement approach to technology transfer. It is useful in achieving transfer when a large amount of application engineering is not necessary. A wide audience is immediately exposed to the technology. On the other hand, the major manufacturing problems which require a sophisticated technical solution integrating many innovations are less likely to be helped.

  12. The application of kaizen as a continuous technology innovation

    Directory of Open Access Journals (Sweden)

    Martynyuk A.V.

    2016-11-01

    Full Text Available this article describes the essence of technology Kaizen, which was developed in Japan to improve business processes with the aim of improving the quality of products, to improve production processes and the efficiency of management of the organization. In contrast to Western technology, Cirio, which involves the introduction of a radical innovation, technology Kaizen involves the development and implementation of small improvements on an ongoing basis, which ensures stable growth of the main processes of the company. The article presents the description and requirements of the five basic elements of the Kaizen system, and describes the activities of Kaizen teams.

  13. Continued SOFC cell and stack technology and improved production methods

    Energy Technology Data Exchange (ETDEWEB)

    Wandel, M.; Brodersen, K.; Phair, J. (and others)

    2009-05-15

    Within this project significant results are obtained on a number of very diverse areas ranging from development of cell production, metallic creep in interconnect to assembling and test of stacks with foot print larger than 500 cm2. Out of 38 milestones 28 have been fulfilled and 10 have been partly fulfilled. This project has focused on three main areas: 1) The continued cell development and optimization of manufacturing processes aiming at production of large foot-print cells, improving cell performance and development environmentally more benign production methods. 2) Stack technology - especially stacks with large foot print and improving the stack design with respect to flow geometry and gas leakages. 3) Development of stack components with emphasis on sealing (for 2G as well as 3G), interconnect (coat, architecture and creep) and test development. Production of cells with a foot print larger than 500 cm2 is very difficult due to the brittleness of the cells and great effort has been put into this topic. Eight cells were successfully produced making it possible to assemble and test a real stack thereby giving valuable results on the prospects of stacks with large foot print. However, the yield rate is very low and a significant development to increase this yield lies ahead. Several lessons were learned on the stack level regarding 'large foot print' stacks. Modelling studies showed that the width of the cell primarily is limited by production and handling of the cell whereas the length (in the flow direction) is limited by e.g. pressure drop and necessary manifolding. The optimal cell size in the flow direction was calculated to be between approx20 cm and < 30 cm. From an economical point of view the production yield is crucial and stacks with large foot print cell area are only feasible if the cell production yield is significantly enhanced. Co-casting has been pursued as a production technique due to the possibilities in large scale production

  14. Initial non-operative management of uncomplicated appendicitis in children: a protocol for a multicentre randomised controlled trial (APAC trial).

    Science.gov (United States)

    Knaapen, Max; van der Lee, Johanna H; Bakx, Roel; The, Sarah-May L; van Heurn, Ernst W E; Heij, Hugo A; Gorter, Ramon R

    2017-11-15

    Based on epidemiological, immunological and pathology data, the idea that appendicitis is not necessarily a progressive disease is gaining ground. Two types are distinguished: simple and complicated appendicitis. Non-operative treatment (NOT) of children with simple appendicitis has been investigated in several small studies. So far, it is deemed safe. However, its effectiveness and effect on quality of life (QoL) have yet to be established in an adequately powered randomised trial. In this article, we provide the study protocol for the APAC (Antibiotics versus Primary Appendectomy in Children) trial. This multicentre, non-inferiority, randomised controlled trial randomises children aged 7-17 years with imaging-confirmed simple appendicitis between appendectomy and NOT. Patients are recruited in 15 hospitals. The intended sample size, based on the primary outcome, rate of complications and a non-inferiority margin of 5%, is 334 patients.NOT consists of intravenous antibiotics for 48-72 hours, daily blood tests and ultrasound follow-up. If the patient meets the predefined discharge criteria, antibiotic treatment is continued orally at home. Primary outcome is the rate of complications at 1-year follow-up. An independent adjudication committee will assess all complications and their relation to the allocated treatment. Secondary outcomes include, but are not limited to, delayed appendectomies, QoL, pain and (in)direct costs.The primary outcome will be analysed both according to the intention-to-treat principle and the per-protocol principle, and is presented with a one-sided 97.5% CI. We will use multiple logistic and linear regression for binary and continuous outcomes, respectively, to adjust for stratification factors. The protocol has been approved by the Medical Ethics Review Committee of the Academic Medical Center, Amsterdam. Data monitoring is performed by an independent institute and a Data Safety Monitoring Board has been assigned. Results will be presented

  15. Mechanization of Continuous Production of Powdered Cellulose Technology

    Science.gov (United States)

    Prosvirnikov, D. B.; Safin, R. G.; Akhmetshin, I. R.; Taimarov, M. A.; Timerbaev, N. F.

    2017-07-01

    The article presents the mechanization of the process for obtaining powdered cellulose using the technology of steam explosion treatment of lignocellulosic material. The presented unit combines the methods of steam explosion treatment and acid hydrolysis of cellulose-containing raw materials.

  16. Pelaksanaan Perlindungan Keselamatan dan Kesehatan Kerja (K3) Pekerja Wanita Berdasarkan Perjanjian Kerja Bersama (Pkb) di PT. Apac Inti Corpora

    OpenAIRE

    Suradi, Solechan, Soraedha Liestia Harini*

    2016-01-01

    PT. Apac Inti Corpora merupakan merupakan Perusahaan yang bergerak dalam bidang USAha pemintalan dan penenunan dengan jumlah pekerja 6.757 terdiri dari laki – laki sejumlah 2.659 dan wanita sejumlah 4.098. Pengusaha dan pekerja membuat Perjanjian Kerja Bersama agar tercipta hubungan yang harmonis antara pengusaha dengan pekerja. Di dalam Perjanjian Kerja Bersama telah diatur mengenai Keselamatan dan Kesehatan Kerja namun dalam pelaksanaan di lapangan masih ada beberapa pekerja wanita yang ti...

  17. Judicious Use of Simulation Technology in Continuing Medical Education

    Science.gov (United States)

    Curtis, Michael T.; DiazGranados, Deborah; Feldman, Moshe

    2012-01-01

    Use of simulation-based training is fast becoming a vital source of experiential learning in medical education. Although simulation is a common tool for undergraduate and graduate medical education curricula, the utilization of simulation in continuing medical education (CME) is still an area of growth. As more CME programs turn to simulation to…

  18. A Mixed Learning Technology Approach for Continuing Medical Education

    Directory of Open Access Journals (Sweden)

    Vernon R. Curran

    2003-01-01

    Full Text Available Introduction: Distance learning technologies have been used for many years to provide CME to rural physicians. The purpose of this study was to evaluate the utility and acceptability of a mixed learning technology approach for providing distance CME. The approach combined audio teleconferencing instruction with a Web-based learning system enabling the live presentation and archiving of instructional material and media, asynchronous computer conferencing discussions, and access to supplemental online learning resources. Methodology: The study population was comprised of physicians and nurse practitioners who participated in audio teleconference sessions, but did not access the Web-based learning system (non-users; learners who participated in audio teleconferences and accessed the Web-based system (online users; and faculty. The evaluation focused upon faculty and learners’ experiences and perceptions of the mixed learning technology approach; the level of usage; and the effectiveness of the approach in fostering non-mandatory, computer-mediated discussions. Results and Discussion: The users of the Web-based learning system were satisfied with its features, ease of use, and the ability to access online CME instructional material. Learners who accessed the system reported a higher level of computer skill and comfort than those who did not, and the majority of these users accessed the system at times other than the live audio teleconference sessions. The greatest use of the system appeared to be for self-directed learning. The success of a mixed learning technology approach is dependent on Internet connectivity and computer access; learners and faculty having time to access and use the Web; comfort with computers; and faculty development in the area of Web-based teaching.

  19. Bridge continuous deformation measurement technology based on fiber optic gyro

    Science.gov (United States)

    Gan, Weibing; Hu, Wenbin; Liu, Fang; Tang, Jianguang; Li, Sheng; Yang, Yan

    2016-03-01

    Bridge is an important part of modern transportation systems and deformation is a key index for bridge's safety evaluation. To achieve the long span bridge curve measurement rapidly and timely and accurately locate the bridge maximum deformation, the continuous deformation measurement system (CDMS) based on inertial platform is presented and validated in this paper. Firstly, based on various bridge deformation measurement methods, the method of deformation measurement based on the fiber optic gyro (FOG) is introduced. Secondly, the basic measurement principle based on FOG is presented and the continuous curve trajectory is derived by the formula. Then the measurement accuracy is analyzed in theory and the relevant factors are presented to ensure the measurement accuracy. Finally, the deformation measurement experiments are conducted on a bridge across the Yangtze River. Experimental results show that the presented deformation measurement method is feasible, practical, and reliable; the system can accurately and quickly locate the maximum deformation and has extensive and broad application prospects.

  20. [Technology is changing: is the continuing professional development also changing?].

    Science.gov (United States)

    De Fiore, Luca

    2012-01-01

    This paper considers the impact of the new information environment on the scientific communication. Reading behavior changes: today, we browse, scan, watch, receive an impression of something. The new reading habits are not simply determined by the new tools; they are rather influenced by the need to produce and share data and information, using personalized and mobile devices. Also the content formats change: researchers, clinicians, and nurses produce texts, figures, tables, photos, videos, tweets, blog posts and they share them to readers that have to collect, appraise, recombine and - most importantly - contextualize the information. This "continuous partial production" is consistent with a "continuous partial utilization" of data; this is a risk, but it is also an opportunity. On the one side, we risk a self-referential, individualized learning process; on the other side, we can enjoy the extraordinary chance to build a "shared learning environment", able to give a comprehensive solution to the challenges experienced by the health systems. Medical journals survive as valuable media to organize data and information; the new social web tools should support the traditional publishing patterns, to enhance the sharing of information, to help the appraisal of data, and to move forward new communities of learners.

  1. 2009 Continued Testing of the Orion Atmosphere Revitalization Technology

    Science.gov (United States)

    Button, Amy B.; Swerterlitsch, Jeffrey J.

    2010-01-01

    An amine-based carbon dioxide (CO2) and water vapor sorbent in pressure-swing regenerable beds has been developed by Hamilton Sundstrand and baselined for the Orion Atmosphere Revitalization System (ARS). In three previous years at this conference, reports were presented on extensive Johnson Space Center (JSC) testing of this technology in a sea-level pressure environment, with simulated and real human metabolic loads, in both open and closed-loop configurations. The test article design was iterated a third time before the latest series of such tests, which was performed in the first half of 2009. The new design incorporates a canister configuration modification for overall unit compactness and reduced pressure drop, as well as a new process flow control valve that incorporates both compressed gas purge and dual-end vacuum desorption capabilities. This newest test article is very similar to the flight article designs. Baseline tests of the new unit were performed to compare its performance to that of the previous test articles. Testing of compressed gas purge operations helped refine launchpad operating condition recommendations developed in earlier testing. Operating conditions used in flight program computer models were tested to validate the model projections. Specific operating conditions that were recommended by the JSC test team based on past test results were also tested for validation. The effects of vacuum regeneration line pressure on resulting cabin conditions was studied for high metabolic load periods, and a maximum pressure is recommended

  2. Devices for continuous monitoring of glucose: update in technology

    Directory of Open Access Journals (Sweden)

    Gómez AM

    2017-09-01

    Full Text Available Ana María Gómez,1 Diana Cristina Henao Carrillo,1 Oscar Mauricio Muñoz Velandia2,3 1Endocrinology Unit, Hospital Universitario San Ignacio, Bogotá, Colombia; 2Department of Internal Medicine, Hospital Universitario San Ignacio, Bogotá, Colombia; 3Department of Clinical Epidemiology, Pontificia Universidad Javeriana, Faculty of Medicine, Bogotá, Colombia Abstract: Continuous glucose monitoring (CGM is a tool that allows constant evaluation of glycemic control, providing data such as the trend and fluctuation of interstitial glucose levels over time. In clinical practice, there are two modalities: the professional or retrospective and the personal or real-time CGM (RT-CGM. The latest-generation sensors are more accurate and sensitive for hypoglycemia, improving adherence to self-monitoring, which has allowed optimizing glycemic control. The development of algorithms that allow the suspension of the infusion of insulin during hypoglycemia gave rise to the integrated therapy or sensor-augmented insulin pump therapy with low glucose suspend, which has proven to be an effective and safe alternative in the treatment of diabetic patients with high risk of hypoglycemia. The objective of this review is to present the evidence of the advantages of RT-CGM, the clinical impact of integrated therapy, and cost-effectiveness of its implementation in the treatment of patients with diabetes mellitus. Keywords: CMG, devices, hypoglycemia, SAPT, SAPT+LGS

  3. Pengaruh Komitmen Kerja, Stres Kerja Dan Disiplin Kerja Terhadap Kinerja Karyawan Bagian Spinning III PT. Apac Inti Corpora

    OpenAIRE

    Huson, Muchammad Ali; Rodhiyah, Rodhiyah; Dewi, Reni Shinta

    2015-01-01

    The need for human resources are not small and labor requirements vary with the complex challenges of the work is a problem for a company. PT. APAC INTI CORPORA engaged in textiles that need to maintain human resources work in order to meet the quantity and quality of the product. However, in 2013 the production and performance of any inconsistency unfavorable assessments on the performance of the employee.The purpose of research to determine the effect of work commitment, job stress, and wor...

  4. Advances in Technology in Continuing Education: Who Should Foot the Bill?

    Science.gov (United States)

    Hanson, Matthew

    2013-01-01

    Every continuing education unit must be at the forefront of the technology boom in order to remain attractive to students and best prepare them for the work force. Unfortunately, there is a significant cost associated with technological advancement sparking the debate over who should foot the bill for innovations. This article applies the Higher…

  5. Cognitive Factors in Predicting Continued Use of Information Systems with Technology Adoption Models

    Science.gov (United States)

    Huang, Chi-Cheng

    2017-01-01

    Introduction: The ultimate viability of an information system is dependent on individuals' continued use of the information system. In this study, we use the technology acceptance model and the theory of interpersonal behaviour to predict continued use of information systems. Method: We established a Web questionnaire on the mySurvey Website and…

  6. Diabetes Technology-Continuous Subcutaneous Insulin Infusion Therapy and Continuous Glucose Monitoring in Adults: An Endocrine Society Clinical Practice Guideline.

    Science.gov (United States)

    Peters, Anne L; Ahmann, Andrew J; Battelino, Tadej; Evert, Alison; Hirsch, Irl B; Murad, M Hassan; Winter, William E; Wolpert, Howard

    2016-11-01

    To formulate clinical practice guidelines for the use of continuous glucose monitoring and continuous subcutaneous insulin infusion in adults with diabetes. The participants include an Endocrine Society-appointed Task Force of seven experts, a methodologist, and a medical writer. The American Association for Clinical Chemistry, the American Association of Diabetes Educators, and the European Society of Endocrinology co-sponsored this guideline. The Task Force developed this evidence-based guideline using the Grading of Recommendations, Assessment, Development, and Evaluation system to describe the strength of recommendations and the quality of evidence. The Task Force commissioned one systematic review and used the best available evidence from other published systematic reviews and individual studies. One group meeting, several conference calls, and e-mail communications enabled consensus. Committees and members of the Endocrine Society, the American Association for Clinical Chemistry, the American Association of Diabetes Educators, and the European Society of Endocrinology reviewed and commented on preliminary drafts of these guidelines. Continuous subcutaneous insulin infusion and continuous glucose monitoring have an important role in the treatment of diabetes. Data from randomized controlled trials are limited on the use of medical devices, but existing studies support the use of diabetes technology for a wide variety of indications. This guideline presents a review of the literature and practice recommendations for appropriate device use.

  7. A CONSTRUÇÃO DE SENTIDOS NO MÉTODO DE EXECUÇÃO PENAL APAC

    Directory of Open Access Journals (Sweden)

    Sirlene Lopes de Miranda

    2015-12-01

    Full Text Available ResumoO ser humano se encontra em constante processo de mudança e de construção de conhecimento a partir de suas relações consigo e com o outro. As tensões, afastamentos e vínculos inerentes às relações eu-outro são importantes para o Construtivismo Semiótico-Cultural em Psicologia. Este trabalho discute a construção de sentidos no Método de Execução Penal APAC com base no depoimento de um condenado, publicado em obra que descreve tal método. Realizou-se uma análise microgenética do conteúdo da narrativa. Aspectos que se destacaram nessa análise: a relação eu-mundo e as experiências inquietantes; expectativas feridas e reconstruídas nas relações eu-outro; o planejamento de futuro e o processo de reorganização de sentidos. Nesse campo específico de pesquisa, do ponto de vista da Psicologia Cultural, torna-se relevante efetuar estudos de caso que possam discutir a rede de relações eu-outro que formam o Método de Execução Penal APAC e seus processos de construção de sentidos.

  8. Governing mobile technology use for continuing professional development in the Australian nursing profession.

    Science.gov (United States)

    Mather, Carey Ann; Gale, Fred; Cummings, Elizabeth Anne

    2017-01-01

    The rapid growth in the use of mobile technology in Australia has outpaced its governance, especially in healthcare settings. Whilst some Australian professional bodies and organisations have developed standards and guidelines to direct appropriate use of social media and mobile technology, clear governance arrangements regarding when, where and how to use mobile technology at point of care in nursing are currently lacking. This paper analyses how the use of mobile technology by nurses at point of care is governed. It highlights the existence of a mobile technology paradox: an identified inability of nurses to access mobile technology in a context where it is increasingly recognised that its use in situ can enhance nursing practice while contributing to mobile learning and continuing professional development. While the recent release of the Registered Nurse Standards for Practice and accompanying Standard for Continuing Professional Development provides some direction regarding professional standards to support the use of mobile technology for mobile learning, we argue a more inclusive approach is required if emerging technologies are to be fully embraced. We describe how an implementation framework, underpinned by more detailed standards, guidelines and codes, could enable the nursing profession to be leaders in embedding mobile technology in healthcare environments nationally and globally. The prevalence of mobile technology in Australia has outpaced its governance in healthcare environments. Its limited availability at point of care is hindering nursing practice, mobile learning and continuing professional development. We discuss the emergence of mobile technology and impediments for its use by nurses in situ. We analyse the professional codes governing nursing, outlining potential reforms to enable implementation of mobile technology at point of care by nurses.

  9. Continuing education for Physical Education teachers: Assistive Technology in inclusive education

    Directory of Open Access Journals (Sweden)

    Maria Luiza Salzani Fiorini

    2017-05-01

    Full Text Available This study aimed at describing the development of continuing education for physical education teachers towards the incorporation of Assistive Technology and the creation of favorable conditions to an inclusive school. The methodology employed was reflective and collaborative research. Two teachers who were facing difficulties to include a physically disabled student and one student with global developmental delay took part in the study. The continuing education plan comprised three steps: 1 reflecting on their own practice after watching a video and planning one lesson, together with the researcher, seeking to incorporate Assistive Technology and favor inclusion; 2 videoing the lesson; 3 evaluating and reflecting on what was planned and what was executed and planning a new lesson. Some factors were seen to be essential to the development of continuing education: considering the teacher’s demand, developing collaborative work, promoting reflection on the practices and having Assistive Technology as a support to the human element.

  10. New vision technology for multidimensional quality monitoring of continuous frying of meat

    DEFF Research Database (Denmark)

    Daugaard, Søren Blond; Adler-Nissen, Jens; Carstensen, Jens Michael

    2010-01-01

    The potential of using multi-spectral vision technology for quality control in a continuous frying process was investigated. canonical discriminant analysis of the multi-spectral images of samples of fried minced meat and diced turkey Could clearly visualise the effect of different heat treatments....... The vision technology can also detect even slight increases in the agglutination of the fried minced meat during the process. This agglutination is undesirable, but very difficult to measure on-line. The results indicate that multi-spectral vision technology may partially or totally Substitute visual...

  11. Information technology and its role in anaesthesia training and continuing medical education.

    Science.gov (United States)

    Chu, Larry F; Erlendson, Matthew J; Sun, John S; Clemenson, Anna M; Martin, Paul; Eng, Reuben L

    2012-03-01

    Today's educators are faced with substantial challenges in the use of information technology for anaesthesia training and continuing medical education. Millennial learners have uniquely different learning styles than previous generations of students. These preferences distinctly incorporate the use of digital information technologies and social technologies to support learning. To be effective teachers, modern educators must be familiar with these new information technologies and understand how to use them for medical education. Examples of new information technologies include learning management systems, lecture capture, social media (YouTube, Flickr), social networking (Facebook), Web 2.0, multimedia (video learning triggers and point-of-view video) and mobile computing applications. The information technology challenges for educators in the twenty-first century include: (a) understanding how technology shapes the learning preferences of today's anaesthesia residents, (b) distinguishing between the function and properties of new learning technologies and (c) properly using these learning technologies to enhance the anaesthesia curriculum. Copyright © 2012 Elsevier Ltd. All rights reserved.

  12. Criteria for Continuing Professional Development of Technology Teachers' Professional Knowledge: A Theoretical Perspective

    Science.gov (United States)

    Engelbrecht, Werner; Ankiewicz, Piet

    2016-01-01

    Continuing professional teacher development (CPTD) is generally accepted as an indispensable tool for the professional development of technology teachers. The current theoretical framework for CPTD comprises a variety of models. However, criteria underpinning these models are not explicit. If, in turn, the criteria were explicit, it could serve as…

  13. 76 FR 23812 - Reliability and Continuity of Communications Networks, Including Broadband Technologies; Effects...

    Science.gov (United States)

    2011-04-28

    ...] Reliability and Continuity of Communications Networks, Including Broadband Technologies; Effects on Broadband...: Effects on Broadband Communications Networks of Damage or Failure of Network Equipment or Severe Overload... Docket 10-92 (Effects on Broadband Communications Networks of Damage or Failure of Network Equipment or...

  14. DISAIN SISTEM DATABASE ORDER PRODUKSI PADA DEPARTEMEN LOOM – WEAVING 4, DIVISI DENIM PT APAC INTI CORPORA

    Directory of Open Access Journals (Sweden)

    Heru Prastawa

    2012-02-01

    Full Text Available Penjadwalan dalam organisasi industri mempunyai peranan penting terutama pada level operasional. Untuk mencapai sebuah penjadwalan yang baik, semua data pendukung harus diatur untuk mendukung proses penjadwalan. Departemen Loom-Weaving 4, Divisi Denim, PT. APAC INTI Corpora, khususnya pada Departemen PPC membutuhkan sebuah sistem database untuk mendukung proses penjadwalan. Untuk menjalankan fungsinya, Departemen PPC membutuhkan informasi yang cepat, akurat dan aktual untuk dibagi dengan bagian Marketing sebagai dasar pengambilan keputusan dalam menerima atau menolak order dan menginformasikan status pembuatan order. Departemen PPC juga harus menyediakan informasi untuk pelaksanaan pembelian order oleh Departemen Produksi. Penelitian ini mengembangkan sebuat sistem database untuk memfasilitasi PPC dalam manajemen data dan menyediakan informasi order. Sistem database didesain untuk menyediakan bantuan dalam penyimpanan data order, pelaporan produksi dan merencakan perbaikan jika terdapat order tambahan. Kata Kunci: penjadwalan, order produksi, sistem database     Abstract   Scheduling in an industrial organization has an important role especially in operational level. To reach a good scheduling, all of the assistive data have to be arranged to support the scheduling process. Loom Department at Weaving 4 - Denim Division, PT Apac Inti Corpora, especially at PPC Department needs a database system to support the scheduling process. In running its function PPC Department required to provide the information quickly, accurate and actual to share with Marketing as base of decision making in accepting or refusing an order and inform the status of order workmanship. PPC Department also must provide the information for buyer order execution by Production Department. This research develops a database system to facilitate the PPC in managing data and provide the order information. Database system is designed to provide aid in archives of order data

  15. Technology transfer and application of SERS continuous monitor for trace organic compounds

    International Nuclear Information System (INIS)

    Swindle, D.W. Jr.; Vo-Dinh, T.; Yalcintas, M.G.

    1992-01-01

    An in situ-enhanced Raman Scattering (SERS) continuous monitoring system was developed for exciting and collecting SERS signals generated on silver-coated microparticles deposited on a continuously rotating filter-paper support. SERS measurements were successfully conducted for several organic compounds. An in situ SERS fiber-optic system was also developed for exciting and collecting SERS signals generated from a sensing tip having silver-coated microparticles deposited on a glass-plate support. These devices will be very useful in remote identification of unknown chemicals from hazardous waste sites. This patented technology has been licensed from Oak Ridge National Laboratory to an analytical instrumentation firm which is in the process of completing development and marketing these detectors. Advantages to using this technology range from increased safety and sensitivity for detecting hazardous compounds to better statistics and reliable results. During this presentation, efforts of the Environmental Restoration Program to evaluate and support development of this technology will be described

  16. Facilitating continuity: exploring the role of digital technology in physical rehabilitation

    DEFF Research Database (Denmark)

    Bagalkot, Naveen L.; Nazzi, Elena; Sokoler, Tomas

    2010-01-01

    In this paper we report our early experiences on exploring if, and how, digital technology can help facilitate a stronger sense of continuity in the physical rehabilitation process, as experienced by the therapists and the senior citizens. We recognize four aspects of the design space offered......-through-design approach we have used sketching in a co-design setting with senior citizens and therapists, as the main vehicle for our research. With our MagicMirror and Walky design explorations, we aim to contribute on two levels: firstly, by providing two proof-of-concepts of designing digital technology...... for the physical rehabilitation of senior citizens. Secondly, and more importantly, we provide a pointer towards a new practice of physical rehabilitation: a practice where the role of digital technology is to support, through the facilitation of continuity, the collaboration between therapist and senior citizens...

  17. Technology Solutions to Support Care Continuity in Home Care: A Focus Group Study.

    Science.gov (United States)

    Dowding, Dawn W; Russell, David; Onorato, Nicole; Merrill, Jacqueline A

    2017-09-01

    Elevated hospital readmission rates from home care are an indicator of poor care quality, and rates are particularly high for patients with heart failure. Readmissions may be avoided by optimizing continuity of care. To explore perceptions among home care clinicians of the barriers they face and the information they need to improve care continuity for patients with heart failure. Focus groups were conducted with teams of home care clinicians at a large certified home healthcare agency in the Northeastern United states. In total, there were 61 participants across 6 focus groups. Three overarching themes emerged: continuity of care and communication on care transitions, maintaining continuity of care during a home care episode (with subthemes tracking signs and symptoms and patient teaching), and health information technology (HIT) characteristics to support communication and care continuity. Our study highlights areas of improvement for HIT solutions that could support care delivery for patients with heart failure in a home care setting. Home care agencies planning to introduce technology can use these findings to assess if and how potential systems can support nurses to provide continuity of care across healthcare organizations and home care visits.

  18. Remote and continuous gamma spectrometry for environmental radiation protection: state of the art technology and perspectives

    International Nuclear Information System (INIS)

    Van Put, Ph.; Lellis, C.; Debauche, A.; Lacroix, J-P.

    2004-01-01

    The instruments technologies for radiological protection of the environment have been considerably enhanced since the last 20 years. From very simple warning bells in the early 80s, the instruments have been sophisticated nowadays to a degree where their performances can be compared to the performances achieved in low level laboratories. This presentation will briefly overview the evolution of these instruments by comparing their technology, their methodology and their performances. Next, it will present the concepts of the state of the art technology in the field of continuous monitoring of the environment. A discussion will follow on the performances and the limitations of this technology. Finally, the presentation will highlight the future perspective of developments by taking into account recent progress in the field of radiation detectors, telecommunication and computer sciences among others. (authors)

  19. Evolution of Technology for Continuous Renal Replacement Therapy: Forty Years of Improvement.

    Science.gov (United States)

    Ronco, Claudio

    2018-01-01

    Continuous arteriovenous hemofiltration (CAVH) was proposed in 1977 as an alternative treatment for acute renal failure in patients in whom peritoneal dialysis or hemodialysis was clinically or technically precluded. In the mid-1980s, this technique was extended to infants and children. CAVH presented important advantages in the areas of hemodynamic stability, control of circulating volume, and nutritional support. However, there were serious shortcomings such as the need for arterial cannulation and limited solute clearance. These problems were solved by the introduction of continuous arteriovenous hemodiafiltration and continuous arteriovenous hemodialysis, where uremic control could be achieved by increasing countercurrent dialysate flow rates to 1.5 or 2 L/h as necessary, or by venovenous techniques utilizing a double-lumen central venous catheter for vascular access. Thus, continuous venovenous hemofiltration replaced CAVH because of its improved performance and safety. From the initial adoptive technology, specific machines have been designed to permit safe and reliable performance of the therapy. These new machines have progressively undergone a series of technological steps that have resulted in the evolution of highly sophisticated equipment utilized today. A significant number of advances have taken place since the time continuous renal replacement therapy was initiated. In particular, there have been successful experiments with high-volume hemofiltration and high-permeability hemofiltration. The additional and combined use of sorbent has also been tested successfully. Progress has been made in the technology as well as the understanding of the pathophysiology of acute kidney injury. Today, new biomaterials and new devices are available and new frontiers are on the horizon. Although improvements have been made, a lot remains to be done. Critical care nephrology is expected to further evolve in the near future, especially in the area of information and

  20. Continuous Partial Attention as a Problematic Technology Use: A Case Of Educators

    Directory of Open Access Journals (Sweden)

    Dr. Mehmet Firat

    2013-07-01

    Full Text Available Continuous Partial Attention is a current concept open to research which, besides multitasking, intensely occupies the agenda of education, communication and cognitive psychology. The purpose of the present study was to determine educators’ continuous partial attention. In line with this purpose, the research data were collected from 109 educators in higher education from different age groups and from four different countries with the use of a questionnaire made up of two sections and seven questions. The findings obtained in the study revealed that the educators’ Continuous Partial Attention did not significantly differ with respect to their technology use efficacies, their ages or their countries. In addition, it was found out that the educators’ Continuous Partial Attention differed statistically significantly depending on the fields they worked in. Based on this, it could be stated that educators working in the field of educational technologies encounter with Continuous Partial Attention more frequently than educators working in other fields. At the end of the study, several suggestions were put forward.

  1. Continuous process of powder production for MOX fuel fabrication according to ''granat'' technology

    International Nuclear Information System (INIS)

    Morkovnikov, V.E.; Raginskiy, L.S.; Pavlinov, A.P.; Chernov, V.A.; Revyakin, V.V.; Varykhanov, V.S.; Revnov, V.N.

    2000-01-01

    During last years the problem of commercial MOX fuel fabrication for nuclear reactors in Russia was solved in a number of directions. The paper deals with the solution of the problem of creating a continuous pilot plant for the production of MOX fuel powders on the basis of the home technology 'Granat', that was tested before on a small-scale pilot-commercial batch-operated plant of the same name and confirmed good results. (authors)

  2. Application of neutron-interaction based radiometric measurements in continuous industrial technologies

    International Nuclear Information System (INIS)

    Faludi, Gy.; Hazi, E.

    1980-01-01

    A number of measuring methods (such as moisture determination, hydrogen content determination, etc.) have been developed based on the interactions of neutrons and various materials (slowing-down, absorption, scattering). This paper deals with the disturbances (mainly with the effects of space-filling changes) of neutron interaction based radiometrical measurement methods used in the continuous industrial technologies and the elimination methods of these disturbances. The socalled dual-channel elimination method is discussed in detail. (author)

  3. Automated integration of continuous glucose monitor data in the electronic health record using consumer technology

    OpenAIRE

    Kumar, Rajiv B; Goren, Nira D; Stark, David E; Wall, Dennis P; Longhurst, Christopher A

    2016-01-01

    The diabetes healthcare provider plays a key role in interpreting blood glucose trends, but few institutions have successfully integrated patient home glucose data in the electronic health record (EHR). Published implementations to date have required custom interfaces, which limit wide-scale replication. We piloted automated integration of continuous glucose monitor data in the EHR using widely available consumer technology for 10 pediatric patients with insulin-dependent diabetes. Establishm...

  4. Continuous positive airway pressure machines and the work of coordinating technologies at home.

    Science.gov (United States)

    Moreira, Tiago

    2008-06-01

    Research on the use of health technology at home has consistently reported that it is underpinned by users' evaluations of the technology in relation to their illness trajectory, their social network, and the place where it is used. Recent studies have also revealed that the efficacy of health technologies depends upon users' work that is largely invisible to professionals, managers and designers. This paper draws on the most widely used therapy for the management of sleep apnoea, continuous positive airway pressure (CPAP), to show how users maintain workable relationships between it and other technological elements of the domestic environment. Qualitative analysis was performed of an archive of messages sent to a web-based support group for sleep disorders between 1994 and 2007. Users describe two related techniques: first, drawing on their embodied knowledge of using domestic technologies to imagine potential, alternative environments for CPAP; and second, using their body as an instrument to assess the ;fit' of each of the attempted arrangements. The interaction between these two techniques entails frequent shifts in users' understandings of their illness and those involved in its management. Strategies of implementation of health technologies at home should acknowledge and incorporate the embodied knowledge processes of users.

  5. Rapid Determination of Optimal Conditions in a Continuous Flow Reactor Using Process Analytical Technology

    Directory of Open Access Journals (Sweden)

    Michael F. Roberto

    2013-12-01

    Full Text Available Continuous flow reactors (CFRs are an emerging technology that offer several advantages over traditional batch synthesis methods, including more efficient mixing schemes, rapid heat transfer, and increased user safety. Of particular interest to the specialty chemical and pharmaceutical manufacturing industries is the significantly improved reliability and product reproducibility over time. CFR reproducibility can be attributed to the reactors achieving and maintaining a steady state once all physical and chemical conditions have stabilized. This work describes the implementation of a smart CFR with univariate physical and multivariate chemical monitoring that allows for rapid determination of steady state, requiring less than one minute. Additionally, the use of process analytical technology further enabled a significant reduction in the time and cost associated with offline validation methods. The technology implemented for this study is chemistry and hardware agnostic, making this approach a viable means of optimizing the conditions of any CFR.

  6. Managing Database Services: An Approach Based in Information Technology Services Availabilty and Continuity Management

    Directory of Open Access Journals (Sweden)

    Leonardo Bastos Pontes

    2017-01-01

    Full Text Available This paper is held in the information technology services management environment, with a few ideas of information technology governance, and purposes to implement a hybrid model to manage the services of a database, based on the principles of information technology services management in a supplementary health operator. This approach utilizes fundamental nuances of services management guides, such as CMMI for Services, COBIT, ISO 20000, ITIL and MPS.BR for Services; it studies harmonically Availability and Continuity Management, as most part of the guides also do. This work has its importance because it keeps a good flow in the database and improves the agility of the systems in the accredited clinics in the health plan.

  7. Nurse adoption of continuous patient monitoring on acute post-surgical units: managing technology implementation.

    Science.gov (United States)

    Jeskey, Mary; Card, Elizabeth; Nelson, Donna; Mercaldo, Nathaniel D; Sanders, Neal; Higgins, Michael S; Shi, Yaping; Michaels, Damon; Miller, Anne

    2011-10-01

    To report an exploratory action-research process used during the implementation of continuous patient monitoring in acute post-surgical nursing units. Substantial US Federal funding has been committed to implementing new health care technology, but failure to manage implementation processes may limit successful adoption and the realisation of proposed benefits. Effective approaches for managing barriers to new technology implementation are needed. Continuous patient monitoring was implemented in three of 13 medical/surgical units. An exploratory action-feedback approach, using time-series nurse surveys, was used to identify barriers and develop and evaluate responses. Post-hoc interviews and document analysis were used to describe the change implementation process. Significant differences were identified in night- and dayshift nurses' perceptions of technology benefits. Research nurses' facilitated the change process by evolving 'clinical nurse implementation specialist' expertise. Health information technology (HIT)-related patient outcomes are mediated through nurses' acting on new information but HIT designed for critical care may not transfer to acute care settings. Exploratory action-feedback approaches can assist nurse managers in assessing and mitigating the real-world effects of HIT implementations. It is strongly recommended that nurse managers identify stakeholders and develop comprehensive plans for monitoring the effects of HIT in their units. © 2011 Blackwell Publishing Ltd.

  8. Process automation using combinations of process and machine control technologies with application to a continuous dissolver

    International Nuclear Information System (INIS)

    Spencer, B.B.; Yarbro, O.O.

    1991-01-01

    Operation of a continuous rotary dissolver, designed to leach uranium-plutonium fuel from chopped sections of reactor fuel cladding using nitric acid, has been automated. The dissolver is a partly continuous, partly batch process that interfaces at both ends with batchwise processes, thereby requiring synchronization of certain operations. Liquid acid is fed and flows through the dissolver continuously, whereas chopped fuel elements are fed to the dissolver in small batches and move through the compartments of the dissolver stagewise. Sequential logic (or machine control) techniques are used to control discrete activities such as the sequencing of isolation valves. Feedback control is used to control acid flowrates and temperatures. Expert systems technology is used for on-line material balances and diagnostics of process operation. 1 ref., 3 figs

  9. Studi Prevalensi Gangguan Fungsi Paru dan Jumlah Kunjungan ke Poliklinik Karyawan Unit Sining 5 dan Bagian CCR Pt. Apac Inti Corpora

    Directory of Open Access Journals (Sweden)

    Tatiek Dyah Wardani

    2015-11-01

    Full Text Available ABSTRACT Backgroud: PT. Apac Inti Corpora as a textile factory has different cotton dust level in each unit. At spinning 5 unit which has 0,29 mg/m3 – 0,83 mg/m3 dust level is lower than CCR unit which has 5,036 mg/m3dust level. The difference of dust level will caused various level of risk. Higher prevalence of lung function disorder will increase number of patient that equivalence with number of visitors in polyclinic.  The aim of this study is to observe the different of lung function disorder patient’s distribution and number of visitors in polyclinic between employee in spinning 5 and CCR at PT. Apac Inti Corpora. Method: This research used cross sectional design. It was used  simple random sampling technique and took 100 people with 50 people each location. Result: This study showed that 12 people (24% of workers at spinning 5 had a lung function disorder and 10 people (20% at CCR. Even though workers at spinning 5 had lower dust level than CCR. Based on statistics test the difference of prevalence lung function disorder is not significant p=0,631. Based on the medical report in polyclinic during 2008,  we found that all patients dad a lung function disorder. In fact, no difference amount of visitors between spinning 5 with CCR in PT. Apac Inti Corpora (p=0,489. Keywords: prevalence of lung function disorder, PT. Apac Inti Corpora

  10. Needing smart home technologies: the perspectives of older adults in continuing care retirement communities.

    Science.gov (United States)

    Courtney, Karen L; Demiris, George; Rantz, Marilyn; Skubic, Marjorie

    2008-01-01

    At present, the vast majority of older adults reside in the community. Though many older adults live in their own homes, increasing numbers are choosing continuing care retirement communities (CCRCs), which range from independent apartments to assisted living and skilled-nursing facilities. With predictions of a large increase in the segment of the population aged 65 and older, a subsequent increase in demand on CCRCs can be anticipated. With these expectations, researchers have begun exploring the use of smart home information-based technologies in these care facilities to enhance resident quality of life and safety, but little evaluation research exists on older adults' acceptance and use of these technologies. This study investigated the factors that influence the willingness of older adults living in independent and assisted living CCRCs to adopt smart home technology. Participants (n = 14) were recruited from community-dwelling older adults, aged 65 or older, living in one of two mid-western US CCRC facilities (independent living and assisted living type facilities). This study used a qualitative, descriptive approach, guided by principles of grounded theory research. Data saturation (or when no new themes or issues emerged from group sessions) occurred after four focus groups (n = 11 unique respondents) and was confirmed through additional individual interviews (n = 3). The findings from this study indicate that although privacy can be a barrier for older adults' adoption of smart home technology their own perception of their need for the technology can override their privacy concerns. Factors influencing self-perception of need for smart home technology, including the influence of primary care providers, are presented. Further exploration of the factors influencing older adults' perceptions of smart home technology need and the development of appropriate interventions is necessary.

  11. TODO HOMEM É MAIOR QUE SEU ERRO?: BASES PARA UMA REFLEXÃO SOBRE O MÉTODO ALTERNATIVO DE GESTÃO CARCERÁRIA APAC/

    Directory of Open Access Journals (Sweden)

    Laura Jimena Ordóñez Vargas

    2009-01-01

    Full Text Available Este artículo presenta un método alternativo de gestión carcelaria denominado APAC (Asociación de Protección y Asistencia a los Condenados, ONG fundada y dirigida por un grupo de católicos, e instituida hace siete años como política pública en el Estado de Minas Gerais, Brasil. Actualmente, existen 108 APAC que, de forma paralela a las prisiones comunes, administran la ejecución de la pena privativa de libertad. Estas prisiones tienen como principal objetivo humanizar la vida intramuros y actuar como una terapéutica penal. "Todo hombre es mayor que su error" y "matar al criminoso y salvar al hombre" son los pilares que, para sus idealizadores, sustentan la creencia en la recuperación de los presos. En este trabajo se presenta también un recorrido bibliográfico, con base en los aportes de algunos teóricos, cuyas contribuciones iluminan las dimensiones criminológicas, psicoterapéuticas y teológicas subyacentes al Método APAC de aprisionamiento.

  12. Continuous Monitoring of Glucose for Type 1 Diabetes: A Health Technology Assessment

    Science.gov (United States)

    Vandersluis, Stacey; Kabali, Conrad; Djalalov, Sandjar; Gajic-Veljanoski, Olga; Wells, David; Holubowich, Corinne

    2018-01-01

    Background Type 1 diabetes is a condition in which the pancreas produces little or no insulin. People with type 1 diabetes must manage their blood glucose levels by monitoring the amount of glucose in their blood and administering appropriate amounts of insulin via injection or an insulin pump. Continuous glucose monitoring may be beneficial compared to self-monitoring of blood glucose using a blood glucose meter. It provides insight into a person's blood glucose levels on a continuous basis, and can identify whether blood glucose levels are trending up or down. Methods We conducted a health technology assessment, which included an evaluation of clinical benefit, value for money, and patient preferences related to continuous glucose monitoring. We compared continuous glucose monitoring with self-monitoring of blood glucose using a finger-prick and a blood glucose meter. We performed a systematic literature search for studies published since January 1, 2010. We created a Markov model projecting the lifetime horizon of adults with type 1 diabetes, and performed a budget impact analysis from the perspective of the health care payer. We also conducted interviews and focus group discussions with people who self-manage their type 1 diabetes or support the management of a child with type 1 diabetes. Results Twenty studies were included in the clinical evidence review. Compared with self-monitoring of blood glucose, continuous glucose monitoring improved the percentage of time patients spent in the target glycemic range by 9.6% (95% confidence interval 8.0–11.2) to 10.0% (95% confidence interval 6.75–13.25) and decreased the number of severe hypoglycemic events. Continuous glucose monitoring was associated with higher costs and small increases in health benefits (quality-adjusted life-years). Incremental cost-effectiveness ratios (ICERs) ranged from $592,206 to $1,108,812 per quality-adjusted life-year gained in analyses comparing four continuous glucose monitoring

  13. Pervasive Computing Technologies to Continuously Assess Alzheimer’s Disease Progression and Intervention Efficacy

    Directory of Open Access Journals (Sweden)

    Bayard E. Lyons

    2015-06-01

    Full Text Available Traditionally, assessment of functional and cognitive status of individuals with dementia occurs in brief clinic visits during which time clinicians extract a snapshot of recent changes in individuals’ health. Conventionally, this is done using various clinical assessment tools applied at the point of care and relies on patients’ and caregivers’ ability to accurately recall daily activity and trends in personal health. These practices suffer from the infrequency and generally short durations of visits. Since 2004, researchers at the Oregon Center for Aging and Technology (ORCATECH at the Oregon Health and Science University (OHSU have been working on developing technologies to transform this model. ORCATECH researchers have developed a system of continuous in-home monitoring using pervasive computing technologies that make it possible to more accurately track activities and behaviors and measure relevant intra-individual changes. We have installed a system of strategically placed sensors in over 480 homes and have been collecting data for up to 8 years. Using this continuous in-home monitoring system ORCATECH researchers have collected data on multiple behaviors such as gait and mobility, sleep and activity patterns, medication adherence and computer use. Patterns of intra-individual variation detected in each of these areas are used to predict outcomes such as low mood, loneliness, and cognitive function. These methods have the potential to improve the quality of patient health data and in turn patient care especially related to cognitive decline. Furthermore, the continuous real-world nature of the data may improve the efficiency and ecological validity of clinical intervention studies.

  14. Automated integration of continuous glucose monitor data in the electronic health record using consumer technology.

    Science.gov (United States)

    Kumar, Rajiv B; Goren, Nira D; Stark, David E; Wall, Dennis P; Longhurst, Christopher A

    2016-05-01

    The diabetes healthcare provider plays a key role in interpreting blood glucose trends, but few institutions have successfully integrated patient home glucose data in the electronic health record (EHR). Published implementations to date have required custom interfaces, which limit wide-scale replication. We piloted automated integration of continuous glucose monitor data in the EHR using widely available consumer technology for 10 pediatric patients with insulin-dependent diabetes. Establishment of a passive data communication bridge via a patient's/parent's smartphone enabled automated integration and analytics of patient device data within the EHR between scheduled clinic visits. It is feasible to utilize available consumer technology to assess and triage home diabetes device data within the EHR, and to engage patients/parents and improve healthcare provider workflow. © The Author 2016. Published by Oxford University Press on behalf of the American Medical Informatics Association.

  15. Automated integration of continuous glucose monitor data in the electronic health record using consumer technology

    Science.gov (United States)

    Kumar, Rajiv B; Goren, Nira D; Stark, David E; Wall, Dennis P; Longhurst, Christopher A

    2016-01-01

    The diabetes healthcare provider plays a key role in interpreting blood glucose trends, but few institutions have successfully integrated patient home glucose data in the electronic health record (EHR). Published implementations to date have required custom interfaces, which limit wide-scale replication. We piloted automated integration of continuous glucose monitor data in the EHR using widely available consumer technology for 10 pediatric patients with insulin-dependent diabetes. Establishment of a passive data communication bridge via a patient’s/parent’s smartphone enabled automated integration and analytics of patient device data within the EHR between scheduled clinic visits. It is feasible to utilize available consumer technology to assess and triage home diabetes device data within the EHR, and to engage patients/parents and improve healthcare provider workflow. PMID:27018263

  16. Definition of information technology architectures for continuous data management and medical device integration in diabetes.

    Science.gov (United States)

    Hernando, M Elena; Pascual, Mario; Salvador, Carlos H; García-Sáez, Gema; Rodríguez-Herrero, Agustín; Martínez-Sarriegui, Iñaki; Gómez, Enrique J

    2008-09-01

    The growing availability of continuous data from medical devices in diabetes management makes it crucial to define novel information technology architectures for efficient data storage, data transmission, and data visualization. The new paradigm of care demands the sharing of information in interoperable systems as the only way to support patient care in a continuum of care scenario. The technological platforms should support all the services required by the actors involved in the care process, located in different scenarios and managing diverse information for different purposes. This article presents basic criteria for defining flexible and adaptive architectures that are capable of interoperating with external systems, and integrating medical devices and decision support tools to extract all the relevant knowledge to support diabetes care.

  17. Using technology to deliver cost-effective Continuing Professional Development (CPD

    Directory of Open Access Journals (Sweden)

    Kuldeep Singh

    2015-01-01

    Full Text Available The work is based on engineering the audio video contents of the didactic presentations at the Regional Symposium on Sleep Medicine delivered to the target audience at NAMSCON 2013. The audio was extracted and then synchronized with Power Points, re-synthesized as SCORM (Sharable Content Object Reference Model compliant packages and integrated with Moodle (Modular Object-Oriented Dynamic Learning Environment as Learning Management System (LMS. The preliminary evaluation results showed high satisfaction with the content, its short loading time and smooth playback. These attributes were demonstrated to be effective in enhancing learning. The Moodle as LMS also allows tracking the participants' progress, involving them in social groups and open discussion forum for further enriching the online content and also helps in statistical analysis through its inbuilt web analytics. The technology is not only flexible and economical but also an effective delivery method for Continuing Professional Development Programmes.Key words: Continuing Professional Development, Learning Management System

  18. Nanotechnology Laboratory Continues Partnership with FDA and National Institute of Standards and Technology | Poster

    Science.gov (United States)

    The NCI-funded Nanotechnology Characterization Laboratory (NCL)—a leader in evaluating promising nanomedicines to fight cancer—recently renewed its collaboration with the U.S. Food and Drug Administration (FDA) and the National Institute of Standards and Technology (NIST) to continue its groundbreaking work on characterizing nanomedicines and moving them toward the clinic. In partnership with NIST and the FDA, NCL has laid a solid, scientific foundation for using the power of nanotechnology to increase the potency and target the delivery

  19. Embracing technology? Using change management strategies to improve the use of continuous lateral rotation therapy.

    Science.gov (United States)

    Cybulski, Pamela; Zantinge, Johanna; Abbott-McNeil, Deanna

    2006-01-01

    The purpose of this quality improvement initiative was to improve the utilization of continuous lateral rotation therapy (CLRT) in a nine-bed community hospital ICU within the context of a nurse-driven protocol. Nursing focus groups, analyzed using a strength, weakness, opportunity, threat (SWOT) approach, resulted in the implementation of four interventions over seven weeks. Change management strategies guided all aspects of the project. Results showed a modest increase in the utilization of CLRT. This initiative demonstrates that change management strategies may assist with the incorporation of technology into nursing practice by increasing empowerment and creating an attachment to and responsibility for outcomes.

  20. Assessing the relationship between technology readiness and continuance intention in an E-appointment system: relationship quality as a mediator.

    Science.gov (United States)

    Chen, Shih-Chih; Jong, Din; Lai, Min-Tsai

    2014-09-01

    Numerous types of self-service technologies have prevailed due to innovations in network and information technology. To hospitals, patient intentions to continue to use the e-appointment system are crucial. Previous investigations discussed only the relationships between the technology readiness of users and their continuance intentions, and ignored the most important mediator, relationship quality. This study explored the relationships among technology readiness, relationship quality, and continuance intention. The research results demonstrated that both optimism and innovativeness significantly and positively influenced continuance intention through the mediating effect of relationship quality. However, discomfort and insecurity hid not significantly influence relationship quality or continuance intention. Finally, theoretical contributions, managerial implications and future research directions were discussed.

  1. Accuracy of flash glucose monitoring and continuous glucose monitoring technologies: Implications for clinical practice.

    Science.gov (United States)

    Ajjan, Ramzi A; Cummings, Michael H; Jennings, Peter; Leelarathna, Lalantha; Rayman, Gerry; Wilmot, Emma G

    2018-02-01

    Continuous glucose monitoring and flash glucose monitoring technologies measure glucose in the interstitial fluid and are increasingly used in diabetes care. Their accuracy, key to effective glycaemic management, is usually measured using the mean absolute relative difference of the interstitial fluid sensor compared to reference blood glucose readings. However, mean absolute relative difference is not standardised and has limitations. This review aims to provide a consensus opinion on assessing accuracy of interstitial fluid glucose sensing technologies. Mean absolute relative difference is influenced by glucose distribution and rate of change; hence, we express caution on the reliability of comparing mean absolute relative difference data from different study systems and conditions. We also review the pitfalls associated with mean absolute relative difference at different glucose levels and explore additional ways of assessing accuracy of interstitial fluid devices. Importantly, much data indicate that current practice of assessing accuracy of different systems based on individualised mean absolute relative difference results has limitations, which have potential clinical implications. Healthcare professionals must understand the factors that influence mean absolute relative difference as a metric for accuracy and look at additional assessments, such as consensus error grid analysis, when evaluating continuous glucose monitoring and flash glucose monitoring systems in diabetes care. This in turn will ensure that management decisions based on interstitial fluid sensor data are both effective and safe.

  2. Using continuous motion monitoring technology to determine patient's risk for development of pressure ulcers.

    Science.gov (United States)

    Zimlichman, Eyal; Shinar, Zvika; Rozenblum, Ronen; Levkovich, Shiraz; Skiano, Sarit; Szyper-Kravitz, Martine; Altman, Arie; Amital, Howard; Shoenfeld, Yehuda

    2011-12-01

    To perform initial validation of a continuous motion monitoring technology that can potentially be used as a risk assessment tool to determine risk for developing pressure ulcers (PUs). We have used the EverOn system (Earlysense LTD, Ramat Gan, Israel) as a bed movement and activity monitor. The EverOn is a contactless continuous measurement system based on a piezoelectric sensor that is placed under the patient's mattress. The study was a noninterventional study performed in 2 medical departments in 2 medical centers. Recorded movement data from enrolled patients were retrospectively analyzed, and patients were assigned a motion level score. Motion scores for the first night of hospitalization were correlated with the Norton scale as calculated per patient on admission. Overall, 116 patients were included in the study from the 2 sites. Motion score was significantly different between the PU risk groups as determined by the Norton scale (10.7 ± 6.2 for low, 5.4 ± 4.9 for intermediate, and 1.6 ± 3.2 for high risk; P risk for developing PU (≤14), the sensitivity of the motion score was 85%, and the specificity was 93%. With regard to individual risk components, we found that activity, mobility, physical condition, and incontinence correlated highly with motion level. The high correlation between the EverOn motion score and the calculated Norton scale indicates the potential of this technology to serve as a risk assessment tool for the development of PUs.

  3. Continuous glucose monitoring technology for personal use: an educational program that educates and supports the patient.

    Science.gov (United States)

    Evert, Alison; Trence, Dace; Catton, Sarah; Huynh, Peter

    2009-01-01

    The purpose of this article is to describe the development and implementation of an educational program for the initiation of real-time continuous glucose monitoring (CGM) technology for personal use, not 3-day CGMS diagnostic studies. The education program was designed to meet the needs of patients managing their diabetes with either diabetes medications or insulin pump therapy in an outpatient diabetes education center using a team-based approach. Observational research, complemented by literature review, was used to develop an educational program model and teaching strategies. Diabetes educators, endocrinologists, CGM manufacturer clinical specialists, and patients with diabetes were also interviewed for their clinical observations and experience. The program follows a progressive educational model. First, patients learn in-depth about real-time CGM technology by attending a group presensor class that provides detailed information about CGM. This presensor class facilitates self-selection among patients concerning their readiness to use real-time CGM. If the patient decides to proceed with real-time CGM use, CGM initiation is scheduled, using a clinic-centered protocol for both start-up and follow-up. Successful use of real-time CGM involves more than just patient enthusiasm or interest in a new technology. Channeling patient interest into a structured educational setting that includes the benefits and limitations of real-time CGM helps to manage patient expectations.

  4. PENENTUAN FAKTOR DAN TARAF FAKTOR DALAM PENGENDALIAN KUALITAS PRODUKSI BENANG PCM DI PT APAC INTI CORPORA DENGAN METODE DESAIN EKSPERIMEN

    Directory of Open Access Journals (Sweden)

    Darminto Pujotomo

    2012-02-01

    Full Text Available PT. APAC Inti Corpora merupakan salah satu perusahaan tekstil yang terbesar di Asia Tenggara dimana salah satu jenis produknya adalah benang PCM yang dihasilkan oleh departemen spinning 4. Permasalahan yang muncul adalah produk akhir yang cacat melebihi target perusahaan sebesar 0,8% dari total produksi, sedangkan perusahaan dituntut untuk menghasilkan produk cacat seminimal mungkin. Masalah ini muncul karena masih banyaknya cacat yang timbul pada benang PCM yang didominan oleh cacat crossing (24,67%,  cacat ring cone (21,98%, cacat tanpa ekor (16,02% dan kontaminasi (12,50%. Penelitian ini dimaksudkan untuk melakukan penilaian terhadap proses yang terjadi dan apabila ternyata memang terjadi proses yang tidak terkendali maka selanjutnya akan dilakukan identifikasi dan analisa faktor-faktor yang mempunyai pengaruh secara signifikan terhadap ttimbulnya cacat crossing pada benang PCM. Metode yang digunakan untuk menilai proses operasi adalah metode pengendalian proses statistik (statistical process control, sedangkan metode yang digunakan untuk menganalisa faktor-faktor yang berpengaruh terhadap timbulnya cacat benang PCM adalah metode desain eksperimen faktorial.  Dari grafik pengendali dan penentuan kemampuan proses dapat diketahui bahwa proses operasi yang terjadi berada di luar kontrol karena menghasilkan cukup banyak produk cacat. Faktor-faktor yang akan diteliti dalam penelitian ini adalah faktor ukuran benang, umur mesin dan kecepatan mesin yang masing-masing faktor terdiri dari 2 taraf faktor. Faktor ukuran benang terdiri dari tipis dan tebal. Faktor umur mesin terdiri dari mesin lama dan mesin baru.Faktor kecepatan mesin terdiri dari 900 MPM dan 1000 MPM. Berdasarkaan perhitungan analisa variansi (ANAVA dan test hipotesa, faktor yang signifikan menyebabkan timbulnya cacat crossing adalah faktor ukuran benang  dan umur mesin.   Kata kunci : cacat crossing, pengendalian kualitas, ANAVA   PT.APAC Inti Corpora is the largest textile

  5. EVALUASI KINERJA THIRD PARTY LOGISTIC (3PL PENGIRIMAN LOKAL DENGAN METODE AHP DAN TOPSIS DI PT. APAC INTI CORPORA

    Directory of Open Access Journals (Sweden)

    Diana Puspita Sari

    2017-11-01

    Full Text Available Evaluasi kinerja Third Party Logistic (3PL merupakan salah satu faktor penting untuk meningkatkan kinerja logistik suatu perusahaan. Untuk itu perlu dilakukan evaluasi untuk meningkatkan pelayanan yang diberikan, demi terciptanya kepuasan pelanggan secara maksimal. PT Apac Inti Corpora saat ini memiliki 12 3PL yang bekerjasama dalam pengiriman lokal. Namun, selama ini belum terdapat adanya metode penilaian khusus untuk mengevaluasi kinerja 3PL perusahaan. Dengan tidak adanya evaluasi kinerja 3PL tersebut, terdapat adanya beberapa masalah dalam pengiriman yang menyebabkan adanya klaim dari customer dan bertambahnya jam kerja karyawan gudang karena kedatangan armada yang tidak tepat waktu. Untuk itu pada penelitian ini dilakukan evaluasi kinerja 3PL dengan menggunakan metode AHP untuk didapatkan bobot kepentingan kriteria yang digunakan dalam evaluasi dan metode TOPSIS untuk mendapatkan rangking kinerja 3PL yang optimal bagi perusahaan. Selanjutnya akan diberikan usulan model penilaian untuk evaluasi kinerja 3PL pengiriman lokal agar dapat digunakan dalam evaluasi selanjutnya. Model evaluasi yang diusulkan tersebut berdasarkan bobot kepentingan kriteria dari metode AHP dengan rating penilaian dengan skala Likert 1-5. Berdasarkan hasil skor dan rating keseluruhan dapat ditentukan kategori kinerja masing-masing 3PL yang selanjutnya dapat ditindaklanjuti oleh PT AIC sesuai dengan kategori penilaian yang diperoleh. Adapun hasil penelitian menunjukkan bahwa urutan tingkat kepentingan dari bobot kriteria terbesar yakni ukuran dan kualitas aset tetap, ketepatan waktu pengiriman, kinerja operasional, dan kualitas pelayanan. Dari hasil TOPSIS dan usulan model penilaian yang diberikan didapatkan bahwa 3PL yang memiliki peringkat pertama dengan kategori penilaian kinerja “di atas rata-rata” adalah PT Bakti Jaya, sedangkan untuk peringkat terakhir dengan kategori penilaian kinerja “butuh peningkatan” adalah PT Satyamitra Anugerah Sejahtera.

  6. RFID Technology for Continuous Monitoring of Physiological Signals in Small Animals.

    Science.gov (United States)

    Volk, Tobias; Gorbey, Stefan; Bhattacharyya, Mayukh; Gruenwald, Waldemar; Lemmer, Björn; Reindl, Leonhard M; Stieglitz, Thomas; Jansen, Dirk

    2015-02-01

    Telemetry systems enable researchers to continuously monitor physiological signals in unrestrained, freely moving small rodents. Drawbacks of common systems are limited operation time, the need to house the animals separately, and the necessity of a stable communication link. Furthermore, the costs of the typically proprietary telemetry systems reduce the acceptance. The aim of this paper is to introduce a low-cost telemetry system based on common radio frequency identification technology optimized for battery-independent operational time, good reusability, and flexibility. The presented implant is equipped with sensors to measure electrocardiogram, arterial blood pressure, and body temperature. The biological signals are transmitted as digital data streams. The device is able of monitoring several freely moving animals housed in groups with a single reader station. The modular concept of the system significantly reduces the costs to monitor multiple physiological functions and refining procedures in preclinical research.

  7. Static and Continuous flow-through pulsed light technology for pesticide abatement in water.

    Science.gov (United States)

    Baranda, Ana Beatriz; Lasagabaster, Amaia; de Marañón, Iñigo Martínez

    2017-10-15

    Perspectives concerning pulsed light (PL) technology as a novel water decontamination treatment are overviewed in this work. Degradation of atrazine, malathion, chlorpyriphos-methyl and bromopropylate in aqueous solutions at different concentrations was performed employing static and continuous flow-through PL units. Results for both PL systems were compared in terms of efficacy of pesticides degradation and derived photoproducts formed. The pesticides degradation increased with the applied total fluence for both PL systems. In general, PL induced rapid degradation of all studied compounds although some differences were observed in the rate of degradation among them. The most intense treatment in the static unit (11J/cm 2 ) yielded degradations between 60 and 85% whereas degradations between 74 and 93% were observed after exposure to slightly lower fluences (10J/cm 2 ) in the dynamic unit. For both PL systems bromopropylate was the most affected compound. Photodegradation products arose from chemical reactions involving structural changes like dehalogenation, desulfuration, dealkylaytion and oxidation of the alkyl chains. Although further research is needed before an efficient application in full-scale systems, PL appears as a promising technology in order to reduce the presence of pesticides residues in process or waste waters, allowing thereby recirculation of these waters with the subsequent economic and environmental advantages. Copyright © 2017 Elsevier B.V. All rights reserved.

  8. Development of the continuous casting technology for fabrication of the tubular fuels

    International Nuclear Information System (INIS)

    Kim, H. S.; Lee, Y. S.; Kim, C. K.; Lee, D. B.; Oh, S. J.

    2003-01-01

    In the irradiation test of the U-Mo dispersed nuclear fuel that is used as nuclear fuels for research reactors, it was recognized that the swelling due to reaction between U-Mo particle and Al matrix caused some failures of the fuel claddings. The development of new style nuclear fuel that could minimize the reaction between U-Mo particles and Al matrix was needed. Tube style nuclear fuel was judged to be suitable as new style nuclear fuel. We targeted to make U-Mo tube of diameter 10mm, thinner than 1mm thick, because temperature distribution of tube style nuclear fuel will be expected to have a good performance. We used continuous casting technology to make tube style nuclear fuel. In this research, we have tried to make tube using copper before we make U-Mo tube style nuclear fuel by continuous casting method. As a result of the experiment, we succeeded to make copper tube of diameter 10mm, thickness 1mm

  9. Continuous roll-to-roll amorphous-silicon photovoltaic manufacturing technology

    Science.gov (United States)

    Izu, M.

    1994-11-01

    This report describes work done in Phase 2 of a 3-year project to advance Energy Conversion Devices, Inc. (ECD), roll-to-roll, triple-junction photovoltaic manufacturing technologies, to reduce the module production costs, to increase the stabilized module performance, and to expand the commercial capacity utilizing ECD technology. Major accomplishments in Phase 2 include: (1) designing, constructing and completing the initial optimization of a 200-kW multi-purpose continuous roll-to-roll amorphous silicon (a-Si) alloy solar cell deposition machine; (2) designing and constructing a serpentine deposition chamber that will be used to demonstrate a compact, low-cost deposition machine design with improved throughput and gas utilization factor; (3) demonstrating greater than or equal to 8.3% initial small-area efficiency a-Si-alloy devices with an intrinsic a-Si layer deposited using serpentine technology in the initial start-up experiment; (4) developing a new back-reflector evaluation technique using Photothermal Defection Spectroscopy (PDS) to analyze the optical losses of textured back-reflector; (5) developing an improved textured Ag/ZnO back-reflector system demonstrating a 26% gain in short-circuit current density over the previous textured Al back-reflector system; (6) demonstrating the long-term stability of ECD's 0.3 m x 1.2 m (1 ft x 4 ft) production module; (7) developing a new grid/bus-bar design utilizing thin wire grids to improve the efficiency by approximately 3% to 4% and reduce the grid/bus-bar cost by about 50%; and (8) achieving accumulative material cost reduction of 56%.

  10. Integrated insulin pump therapy with continuous glucose monitoring for improved adherence: technology update

    Directory of Open Access Journals (Sweden)

    Tumminia A

    2015-09-01

    Full Text Available Andrea Tumminia,1 Laura Sciacca,1 Lucia Frittitta,1 Sebastiano Squatrito,1 Riccardo Vigneri,2 Rosario Le Moli,1 Letizia Tomaselli2 1Endocrinology, Department of Clinical and Experimental Medicine, University of Catania, Garibaldi-Nesima Hospital, Catania, Italy; 2Endocrinology, Garibaldi-Nesima Hospital, Catania, Italy Abstract: Insulin pump therapy combined with real-time continuous glucose monitoring, known as sensor-augmented pump (SAP therapy, has been shown to improve metabolic control and to reduce the rate of hypoglycemia in adults with type 1 diabetes compared to multiple daily injections or standard continuous subcutaneous insulin infusion. Glycemic variability is also reduced in patients on SAP therapy. This approach allows patients to monitor their glucose levels being informed of glycemic concentration and trend. Trained diabetic patients, therefore, can appropriately modify insulin infusion and/or carbohydrate intake in order to prevent hypo- or hyperglycemia. For these reasons, SAP therapy is now considered the gold standard for type 1 diabetes treatment. To be clinically effective, however, devices and techniques using advanced technology should not only have the potential to theoretically ameliorate metabolic control, but also be well accepted by patients in terms of satisfaction and health-related quality of life, because these factors will improve treatment adherence and consequently overall outcome. SAP therapy is generally well tolerated by patients; however, many clinical trials have identified significant noncompliance in the use of this device, most notably in the pediatric and adolescent populations. In this review we aim to analyze the main reasons for good or poor adherence to SAP therapy and to provide useful tips in order to fully benefit from this kind of novel therapeutic approach. Keywords: sensor-augmented insulin pump therapy, type 1 diabetes, quality of life, patient adherence, continuous subcutaneous insulin

  11. Process analytical technology in continuous manufacturing of a commercial pharmaceutical product.

    Science.gov (United States)

    Vargas, Jenny M; Nielsen, Sarah; Cárdenas, Vanessa; Gonzalez, Anthony; Aymat, Efrain Y; Almodovar, Elvin; Classe, Gustavo; Colón, Yleana; Sanchez, Eric; Romañach, Rodolfo J

    2018-03-01

    The implementation of process analytical technology and continuous manufacturing at an FDA approved commercial manufacturing site is described. In this direct compaction process the blends produced were monitored with a Near Infrared (NIR) spectroscopic calibration model developed with partial least squares (PLS) regression. The authors understand that this is the first study where the continuous manufacturing (CM) equipment was used as a gravimetric reference method for the calibration model. A principal component analysis (PCA) model was also developed to identify the powder blend, and determine whether it was similar to the calibration blends. An air diagnostic test was developed to assure that powder was present within the interface when the NIR spectra were obtained. The air diagnostic test as well the PCA and PLS calibration model were integrated into an industrial software platform that collects the real time NIR spectra and applies the calibration models. The PCA test successfully detected an equipment malfunction. Variographic analysis was also performed to estimate the sampling analytical errors that affect the results from the NIR spectroscopic method during commercial production. The system was used to monitor and control a 28 h continuous manufacturing run, where the average drug concentration determined by the NIR method was 101.17% of label claim with a standard deviation of 2.17%, based on 12,633 spectra collected. The average drug concentration for the tablets produced from these blends was 100.86% of label claim with a standard deviation of 0.4%, for 500 tablets analyzed by Fourier Transform Near Infrared (FT-NIR) transmission spectroscopy. The excellent agreement between the mean drug concentration values in the blends and tablets produced provides further evidence of the suitability of the validation strategy that was followed. Copyright © 2018 Elsevier B.V. All rights reserved.

  12. Technology competences, agency and collaborative challenges: from teacher expertise to continuing professional development

    Directory of Open Access Journals (Sweden)

    Chiara Urbani

    2016-07-01

    Full Text Available The teacher Continuing Professional Development (CPD requires today the re-thinking of teachersʼ expertise, in connection to a new definition of professional competence. For example, in the case of technology competences, the continuing training shouldn’t be limited to promoting their learning and practice, however to encourage the re-thinking of the sense and the value of personal agency, that allows to express the competences acquired and link them into an authentic and self-determined dimension. This project research examines the correlation between the pre-school teachers continuing professional development and the agency’s capability processes, trying to define how technologies can affect the professional agency’s qualification. First evidences about the increased value acquired by the extracurricular aspects of networking and governance suggest how teachers’ agency appears focused on interaction with enlarged learning contexts, suggesting the opportunity to invest in socio-relational aspects and integrate them into traditional professional education and training processes.Competenze tecnologiche, agency e sfide collaborative: dall’expertise allo sviluppo professionale docenteLo sviluppo professionale degli insegnanti richiede oggi il ripensamento dellʼexpertise docente nel dialogo con una nuova definizione della competenza professionale. Ad esempio, nel caso delle competenze tecnologiche, la formazione continua non deve limitarsi a promuovere il loro apprendimento ed esercizio, bensì a stimolare il ripensamento del senso e del valore dell’azione, che permette di esprimere pienamente le competenze e ricondurle ad un orizzonte di significazione personale. Il progetto di ricerca sulla correlazione esistente tra lo sviluppo professionale continuo degli insegnanti prescolastici e i processi di capacitazione dellʼazione (agency permette di formulare alcune ipotesi sulla capacità delle tecnologie di influire sulla qualificazione

  13. What does the difference in the terbuthylazine degradation rate in selected soils of Apace Valley catchment means for the pesticide leaching potential?

    Science.gov (United States)

    Suhadolc, Marjetka; Sibanc, Natasa; Lobnik, Franc

    2010-05-01

    The degradation of the selected pesticide terbuthylazine was investigated in the three different soil samples, which occurs frequently in agricultural area of Apace valley (53 km2), Slovenia. Selected soil samples were similar in organic matter content (1.9-2.1 %), pH (4.5-5.3), and in C/N ratio (7-9); whereas differed in texture (silty loam and loam) and in pesticide usage history (»integrated« and intensive soil management). Triazine herbicides were intensively used for several years in high rates in soil sample S9+, which consisted of 9 % of sand, 65 % of silt, and 26 % of clay. The other two soil samples, S8 (8 % sand, 72 % silt, 20 % clay) and S45 (45 % sand, 44% slit, 11 % clay), were not treated with triazine herbicide for 2 years before experiment. The degradation experiment was conducted under constant laboratory conditions using 14C-ring labelled terbuthylazine. Volatile 14C-compounds, including 14CO2 released after 14C-terbuthylazine mineralization, have been measured three times a week. Two months after terbuthylazine application, the total amount of 14C in soil samples, bound residues as well as extracted terbuthylazine and its metabolites were determined. Cumulative mineralization was from 5 to16 % of applied terbuthylazine. The highest cumulative mineralization was in soil sample S9+, soil sample with the most intensive pesticide usage; hence the lag phase was the shortest. Interestingly, the cumulative mineralization was similar also in soil sample S45 (14% of applied terbuthylazine), however the lag phase in this soil was much longer and comparable to soil S8. Leaching potential of terbuthylazine in Apace Valley catchment was assessed with model PELMO 3.22, using soil and long-term climate data of the Apace Valley. Results will be presented in the conference.

  14. Communities of practice: pedagogy and internet-based technologies to support educator's continuing technology professional development in higher education

    NARCIS (Netherlands)

    Maurice Schols

    2011-01-01

    Advances in information and communication technologies (ICTs) as well as modern pedagogical perspectives have created new possibilities to facilitate and support learning in higher education (HE). Emerging technologies bring opportunities to reconsider teaching and learning. New ideas and concepts

  15. Affective and Social Factors Influencing the Continuance Intention of Using Social Technology for the Case-based Learning

    Directory of Open Access Journals (Sweden)

    Siriporn Srisawas

    2012-01-01

    Full Text Available The proliferation of social technology poses both a threat and an opportunityfor the delivery of traditional case method learning in business schools.This paper extends the expectation confirmation model (ECM to examine thepossibility of delivering the case method learning via social technology. Ourregression analysis shows that, in addition to affective factors, the socialfactor of information and knowledge sharing can help improve the accuracyof predicting a student’s continuance intention of using social technology incase method learning. The analysis result leads to theoretical and empiricalfindings for business schools to consider adopting social technology as thenext-generation tool for case method teaching.

  16. Apacible fluye la frontera

    DEFF Research Database (Denmark)

    Gustafsson, Jan

    2010-01-01

    Med udgangspunkt i 'grænsen' som teoretisk begreb undersøges konstruktionen af politiske og øvrige kollektiver identiteter i de to film Machuca (Chile 2004) og M. Estradas tre begravelser (USA, 2005)....

  17. Non-High-Density Lipoprotein Cholesterol Levels on the Risk of Asymptomatic Intracranial Arterial Stenosis: A Result from the APAC Study.

    Science.gov (United States)

    Wu, Jianwei; Wang, Anxin; Li, Xin; Wu, Shouling; Zhao, Xingquan

    2016-11-18

    Intracranial arterial stenosis (ICAS) is an important cause of ischemic stroke and transient ischemic attack (TIA), and the correlation between the plasma non-high density cholesterol (non-HDLC) levels and ICAS, especially asymptomatic ICAS (AICAS) is not clear. The Asymptomatic Polyvascular Abnormalities Community(APAC) study is a community-based, prospective, long-term follow-up observational study. 3387 participants were enrolled in this study. The diagnosis of AICAS was made by transcranial Doppler ultrasonography. The participants were then divided into 3 groups based on their non-HDLC levels. The cox regression was used to analyze the correlation between the non-HDLC level and the incidence of AICAS.9.98% of the participants were diagnosed with AICAS during 2 years following up. Multivariate analysis showed that non-HDL-C is an independent indicator for the incidence of AICAS (HR = 1.22, 95%CI: 1.06-1.40), The incidence of AICAS gradually increase with the increasing non-HDLC level. Compared with subgroup(non-HDLC APAC study.

  18. HUBUNGAN ANTARA STATUS GIZI DAN TINGKAT KEBUGARAN JASMANI DENGAN PRODUKTIVITAS KERJA PADA TENAGA KERJA WANITA UNIT SPINNING 1 BAGIAN WINDING PT. APAC INTI CORPORA BAWEN

    Directory of Open Access Journals (Sweden)

    Sri Rahayu Utami

    2014-10-01

    Full Text Available Tujuan penelitian ini untuk mengetahui hubungan antara status gizi dan tingkat kebugaran jasmani dengan produktivitas kerja pada tenaga kerja wanita unit Spinning 1 bagian Winding PT. Apac Inti Corpora Bawen. Jenis penelitian menggunakan explanatory research dengan pendekatan cross sectional. Populasi berjumlah 73 orang dengan sampel 45 orang. Pengambilan sampel menggunakan metode simple random sampling. Instrument yang digunakan adalah timbangan berat badan dan tinggi badan, bangku harvard, metronome, stopwatch dan lembar data produktivitas. Analisis data menggunakan uji Chi-Square dengan α = 0,05. Dan didapatkan hasil bahwa ada hubungan antara status gizi (p=0,005, tingkat kebugaran jasmani (p=0,001 dengan produktivitas kerja. Melalui penelitian ini diharapkan pekerja dapat mengkonsumsi makanan yang mengandung gizi seimbang ,serta melakukan olahraga untuk meningkatkan kebugaran jasmaninya. The purpose of this research to determine the relationship between nutritional status and level of physical fitness by working on labor productivity women Spinning unit 1 part Winding PT. Apac Inti Corpora Bawen. This research was explanatory research with cross sectional approach. Population was a 73 employees. And sample was 45 employees. Instrument was a weight scales and height, harvard bench, metronome, stopwatch and productivity data sheet. Was processed, using the Chi-Square statistic with α = 0.05. The results was a relationship between nutritional status (p = 0.005, level of physical fitness (p = 0.001 with labor productivity. This research will expect workers to consume foods that contain balanced nutrition and exercise to improve physical fitness.

  19. Continuous flow technology vs. the batch-by-batch approach to produce pharmaceutical compounds.

    Science.gov (United States)

    Cole, Kevin P; Johnson, Martin D

    2018-01-01

    For the manufacture of small molecule drugs, many pharmaceutical innovator companies have recently invested in continuous processing, which can offer significant technical and economic advantages over traditional batch methodology. This Expert Review will describe the reasons for this interest as well as many considerations and challenges that exist today concerning continuous manufacturing. Areas covered: Continuous processing is defined and many reasons for its adoption are described. The current state of continuous drug substance manufacturing within the pharmaceutical industry is summarized. Current key challenges to implementation of continuous manufacturing are highlighted, and an outlook provided regarding the prospects for continuous within the industry. Expert commentary: Continuous processing at Lilly has been a journey that started with the need for increased safety and capability. Over twelve years the original small, dedicated group has grown to more than 100 Lilly employees in discovery, development, quality, manufacturing, and regulatory designing in continuous drug substance processing. Recently we have focused on linked continuous unit operations for the purpose of all-at-once pharmaceutical manufacturing, but the technical and business drivers that existed in the very beginning for stand-alone continuous unit operations in hybrid processes have persisted, which merits investment in both approaches.

  20. Variability in and agreement between modeled and personal continuously measured black carbon levels using novel smartphone and sensor technologies

    NARCIS (Netherlands)

    Nieuwenhuijsen, Mark J; Donaire-Gonzalez, David; Rivas, Ioar; de Castro, Montserrat; Cirach, Marta; Hoek, Gerard; Seto, Edmund; Jerrett, Michael; Sunyer, Jordi

    2015-01-01

    Novel technologies, such as smartphones and small personal continuous air pollution sensors, can now facilitate better personal estimates of air pollution in relation to location. Such information can provide us with a better understanding about whether and how personal exposures relate to

  1. The Role of Self-Determination Theory in Explaining Teachers' Motivation to Continue to Use E-Learning Technology

    Science.gov (United States)

    Sorebo, Oystein; Halvari, Hallgier; Gulli, Vebjorn Flaata; Kristiansen, Roar

    2009-01-01

    Based on self-determination theory, this study proposes an extended information systems continuance theory in the context of teachers' utilization of e-learning technology in connection with on-site courses. In the proposed model teachers' extrinsic motivation (i.e. perceived usefulness), confirmation of pre-acceptance expectations and intrinsic…

  2. Information and Communication Technologies and Continuing Health Professional Education in Canada. A Survey of Providers Final Report.

    Science.gov (United States)

    Memorial Univ., St. John's (Newfoundland).

    The use of information and communication technologies (ICT) in continuing health professional education (CHPE) was examined in a national survey of Canadian CHPE providers. Of the 3,044 surveys distributed to schools of medicine, nursing, and pharmacy, national/provincial health professional associations, nonprofit health advocacy organizations,…

  3. Predicting the Continued Use of Internet-Based Learning Technologies: The Role of Habit

    Science.gov (United States)

    Limayem, Moez; Cheung, Christy M. K.

    2011-01-01

    The proliferation and advance of Internet-based technologies create expanded opportunities for educators to provide students with better learning experiences. Although current studies focus mostly on the learning processes and learning outcomes, this article examines the students' usage behaviour with Internet-based learning technologies across…

  4. Needing smart home technologies: the perspectives of older adults in continuing care retirement communities

    Directory of Open Access Journals (Sweden)

    Karen Courtney

    2008-11-01

    Conclusions Factors influencing self-perception of need for smart home technology, including the influence of primary care providers, are presented. Further exploration of the factors influencing older adults' perceptions of smart home technology need and the development of appropriate interventions is necessary.

  5. COMPARATIVE DISINFECTION EFFICIENCY OF PULSED AND CONTINUOUS-WAVE UV IRRADIATION TECHNOLOGIES

    Science.gov (United States)

    Pulsed UV (PUV) is novel UV irradiation system that is a non-mercury lamp based alternative to currently used continuous-wave systems for water disinfection. To compare the polychromatic PUV irradiation disinfection efficiency with that from continuous wave monochromatic low-pre...

  6. HUBUNGAN ANTARA STATUS GIZI DAN TINGKAT KEBUGARAN JASMANI DENGAN PRODUKTIVITAS KERJA PADA TENAGA KERJA WANITA UNIT SPINNING 1 BAGIAN WINDING PT. APAC INTI CORPORA BAWEN

    Directory of Open Access Journals (Sweden)

    Sri Rahayu utami

    2014-03-01

    Full Text Available Tujuan penelitian ini untuk mengetahui hubungan antara status gizi dan tingkat kebugaran jasmani dengan produktivitas kerja pada tenaga kerja wanita unit Spinning 1 bagian Winding PT. Apac Inti Corpora Bawen.  Jenis penelitian menggunakan explanatory research dengan pendekatan cross sectional. Populasi berjumlah 73 orang dengan sampel 45 orang. Pengambilan sampel menggunakan metode simple random sampling. Instrument yang digunakan adalah timbangan berat badan dan tinggi badan, bangku harvard, metronome, stopwatch dan lembar data produktivitas.  Analisis data menggunakan uji Chi-Square dengan α = 0,05. Dan didapatkan hasil bahwa ada hubungan antara status gizi (p=0,005, tingkat kebugaran jasmani (p=0,001 dengan produktivitas kerja. Melalui penelitian ini diharapkan pekerja dapat mengkonsumsi makanan yang mengandung gizi seimbang ,serta melakukan olahraga untuk meningkatkan kebugaran jasmaninya.

  7. Lifelong Learning for Clinical Practice: How to Leverage Technology for Telebehavioral Health Care and Digital Continuing Medical Education.

    Science.gov (United States)

    Hilty, Donald M; Turvey, Carolyn; Hwang, Tiffany

    2018-03-12

    Psychiatric practice continues to evolve and play an important role in patients' lives, the field of medicine, and health care delivery. Clinicians must learn a variety of clinical care systems and lifelong learning (LLL) is crucial to apply knowledge, develop skills, and adjust attitudes. Technology is rapidly becoming a key player-in delivery, lifelong learning, and education/training. The evidence base for telepsychiatry/telemental health via videoconferencing has been growing for three decades, but a greater array of technologies have emerged in the last decade (e.g., social media/networking, text, apps). Clinicians are combining telepsychiatry and these technologies frequently and they need to reflect on, learn more about, and develop skills for these technologies. The digital age has solidified the role of technology in continuing medical education and day-to-day practice. Other fields of medicine are also adapting to the digital age, as are graduate and undergraduate medical education and many allied mental health organizations. In the future, there will be more online training, simulation, and/or interactive electronic examinations, perhaps on a monthly cycle rather than a quasi-annual or 10-year cycle of recertification.

  8. Continuous auditing & continuous monitoring : Continuous value?

    NARCIS (Netherlands)

    van Hillo, Rutger; Weigand, Hans; Espana, S; Ralyte, J; Souveyet, C

    2016-01-01

    Advancements in information technology, new laws and regulations and rapidly changing business conditions have led to a need for more timely and ongoing assurance with effectively working controls. Continuous Auditing (CA) and Continuous Monitoring (CM) technologies have made this possible by

  9. Journals in the Time of Google: While the Struggle over Open Access Plays Out, Librarians, Vendors, and Publishers Continue to Trade within a Market Dominated by All Things Electronic

    Science.gov (United States)

    Van Orsdel, Lee C.; Born, Kathleen

    2006-01-01

    This article, based on the Periodicals Prices Survey of 2006, evaluates the changing trends of electronic periodical marketplace in 2006 and indicates what to expect in 2007. The 2005-2006 academic year was one of competing realities: the buying and selling of electronic journals continued apace, while the posting and crawling of every kind of…

  10. Without continuous basic research technology will stagnate and economy will be in no growth. Why?

    DEFF Research Database (Denmark)

    Pedersen, Jørgen Lindgaard

    2008-01-01

    The paper presents some ideas about new knowledge and the effects from knowledge on development of new technology. Paul M. Romer established in the 1980s the so-called New Growth Economy. The basic idea is here that knowledge is included explicitly in the production function. With knowledge...... between propositional knowledge and prescriptive knowledge. The first-mentioned is about what nature is. The second-mentioned is about how to manipulate to get a wanted result. What is important is that m ost important new technologies cannot be developed without many different areas of propositional...... knowledge. You can't stumble over the recombinant DNA technology. Even if we have the basic scientific results about genetics and how knowledge can be reproduced as shown in the Crick-Watson double helix model from 1953 it took twenty years before the first gene-splicing was able to be done. So we can't go...

  11. Finite Element Modelling of Mechanical Phenomena Connected to the Technological Process of Continuous Casting of Steel

    Directory of Open Access Journals (Sweden)

    J. Heger

    2004-01-01

    Full Text Available A finite element method algorithm is presented that enables numerical simulation of real phenomena that take place during an industrial process of continuous casting of steel. The algorithm takes into account all known kinds of nonlinearities: material nonlinearity connected to the nonlinear temperature dependence of material properties, large deformations from the process of material forming and contacts between the slab and rollers of the strand. Received results describe the sensitivity of the product to crack initiation, not only during the process of continuous casting itself but also in the finished and cooled slab.

  12. Review of the continuous casting of steel by strip casting technology. Twin roll method system

    International Nuclear Information System (INIS)

    Ibarrondo, I.

    2008-01-01

    In order to compete in the future steel market and to maintain market share, the steel makers will need to use new efficient technologies capable of supplying steel strip products of high quality at low cost. In this way, the strip casting technology by twin rol method is one of the most important research are in the iron and steel industry today. This review makes a general description of the strip casting technology as well as its different steps, such us; metal delivery and casting, solidification process, hot rolling reduction step, etc. Through mathematical and physical models, the influence on microstructure texture surface quality and mechanical properties of the materials obtained by this method are described as a function of processing parameters, specially the roughness of the rolls. the manufacturing of carbon, stainless and electrical steels involves smaller capital and operating cost, lower gas emissions, and an opportunity to create new grades due to a faster solidification rate that leads to a different solidification structures. In sight of all this it is likely that Strip Casting technology will make a profound impact on the manufacturing landscape of the 21 s t century. (Author) 177 refs

  13. Access to Interprofessional Continuing Education in Integrated Care through Digital Instructional Technology

    Science.gov (United States)

    Lapidos, Adrienne; Ruffolo, Mary

    2017-01-01

    In preparing the workforce for integrated care, continuing professional education serves a critical role. Within a rapidly changing health care landscape, matriculated students now benefit from pedagogical innovations supporting integrated care, particularly interprofessional education, and working professionals must not be excluded from this…

  14. Continuous wasteless ecologically safe technology of propylenecarbonate production in presence of phthalocyanine catalysts

    Science.gov (United States)

    Afanasiev, Vladimir Vasilievich [Moscow, RU; Zefirov, Nikolai Serafimovich [Moscow, RU; Zalepugin, Dmitry Yurievich [Moscow, RU; Polyakov, Victor Stanislavovich [Moscow, RU; Tilkunova, Nataliya Alexandrovna [Moscow, RU; Tomilova, Larisa Godvigovna [Moscow, RU

    2009-09-08

    A continuous method of producing propylenecarbonate includes carboxylation of propylene oxide with carbon dioxide in presence of phthalocyanine catalyst on an inert carrier, using as the phthalocyanine catalyst at least one catalyst selected from the group consisting of not-substituted, methyl, ethyl, butyl, and tret butyl-substituted phthalocyanines of metals, including those containing counterions, and using as the carrier a hydrophobic carrier.

  15. Managing perceived conflicts of interest while ensuring the continued innovation of medical technology.

    Science.gov (United States)

    Van Haute, Andrew

    2011-09-01

    If it were not for the ongoing collaboration between vascular surgeons and the medical technology industry, many of these advanced treatments used every day in vascular interventional surgery would not exist. The flip side of this coin is that these vital relationships create multiple roles for surgeons and must be appropriately managed. The dynamic process of innovation, along with factors such as product delivery technique refinement, education, testing and clinical trials, and product support, all make it necessary for ongoing and close collaboration between surgeons and the device industry. This unique relationship sometimes leads to the perception of conflicts of interest for physicians, in part because the competing pressures from the multiple, overlapping roles as clinician/caregiver/investigator/innovator/customer are significant. To address this issue, the Advanced Medical Technology Association (AdvaMed), the nation's largest medical technology association representing medical device and diagnostics companies, developed a Code of Ethics to guide medical technology companies in their interactions with health care professionals. First introduced in 1993, the AdvaMed Code strongly encourages both industry and physicians to commit to openness and high ethical standards in the conduct of their business interactions. The AdvaMed Code addresses many of the types of interactions that can occur between companies and health care professionals, including training, consulting agreements, the provision of demonstration and evaluation units, and charitable donations. By following the Code, companies send a strong message that treatment decisions must always be based on the best interest of the patient. Copyright © 2011. Published by Mosby, Inc.

  16. Considerations regarding the use of technological equipment for indexed and continuous multi-axes machining

    Directory of Open Access Journals (Sweden)

    Breaz Radu-Eugen

    2017-01-01

    Full Text Available CNC machine-tools are becoming more and more complex, with regards of kinematic capabilities, driving systems, HMI interfaces and controllers. Consequently, the prices of these machines are also increasing, being directly linked with the machine characteristics. Multi-axes kinematic is nowadays seen as the possibility of controlling the motion of the machine elements not only on translational axes, but also on rotational ones. There are mainly two types of CNC milling machines with multi-axes kinematic: indexed 3+1 and/or 3+2 axes and continuous 4 and/or 5 axes machines. This work will present some aspects regarding indexed multi-axis and continuous multi-axes machining.

  17. Pilot study: Assessing the effect of continual position monitoring technology on compliance with patient turning protocols

    OpenAIRE

    Schutt, Suann Cirigliano; Tarver, Christine; Pezzani, Michelle

    2017-01-01

    Abstract Aim The study aim was to evaluate if continual patient position monitoring, taking into account self‐turns and clinician‐assisted turns, would increase the percentage of time a patient's position changed at least every 2 hr. Background While patient turning has clinical benefits, current models to help staff remember to turn patients, such as “turn clocks” and timers, have not resulted in high compliance with turning protocols. In addition, reminders are based on arbitrary 2‐hr windo...

  18. Workshop on CEBAF [Continuous Electron Beam Accelerator Facility] spectrometer magnet design and technology: Proceedings

    International Nuclear Information System (INIS)

    1986-09-01

    The planned experimental program at CEBAF includes high-resolution, large acceptance spectrometers and a large toroidal magnetic, detector. In order to take full advantage of the high quality beam characteristics, the performances required will make these devices quite unique instruments compared to existing facilities in the same energy range. Preliminary designs have shown that such performances can be reached, but key questions concerning design concepts and most appropriate and cost-effective technologies had to be answered before going further with the designs. It was the purpose of the Workshop on CEBAF Spectrometer Magnet Design and Technology, organized by the CEBAF Research and Engineering Divisions, to provide the most complete information about the state-of-the-art tools and techniques in magnet design and construction and to discuss the ones most appropriate to the CEBAF spectrometers. In addition, it is expected that this Workshop will be the staring point for further interactions and collaborations between international magnet experts and the CEBAF staff, during the whole process of designing and building the spectrometers

  19. Continuing investigations for technology assessment of 99Mo production from LEU [low enriched uranium] targets

    International Nuclear Information System (INIS)

    Vandegrift, G.F.; Kwok, J.D.; Marshall, S.L.; Vissers, D.R.; Matos, J.E.

    1987-01-01

    Currently much of the world's supply of 99m Tc for medical purposes is produced from 99 Mo derived from the fissioning of high enriched uranium (HEU). This paper presents the results of our continuing studies on the effects of substituting low enriched uranium (LEU) for HEU in targets for the production of fission product 99 Mo. Improvements in the electrodeposition of thin films of uranium metal continue to increase the appeal for the substitution of LEU metal for HEU oxide films in cylindrical targets. The process is effective for targets fabricated from stainless steel or zircaloy. Included is a cost estimate for setting up the necessary equipment to electrodeposit uranium metal on cylindrical targets. Further investigations on the effect of LEU substitution on processing of these targets are also reported. Substitution of uranium silicides for the uranium-aluminium alloy or uranium aluminide dispersed fuel used in current target designs will allow the substitution of LEU for HEU in these targets with equivalent 99 Mo-yield per target and no change in target geometries. However, this substitution will require modifications in current processing steps due to 1) the insolubility of uranium silicides in alkaline solutions and 2) the presence of significant quantities of silicate in solution. Results to date suggest that substitution of LEU for HEU can be achieved. (Author)

  20. Adding user-friendliness and ease of implementation to continuous speech recognition technology with speech macros: case studies.

    Science.gov (United States)

    Green, Harrison D

    2004-01-01

    Continuous Speech Recognition Technology implementation is expensive, and the failure of leading companies in this niche can hamper usefulness. C-SRT, if deployed and used with speech macros, experiences vastly improved implementations and drastically reduces medical transcription costs.A speech macro is a short phrase that is automatically translated into a block of text or a graphic display. A more powerful form of speech macro can bring up predefined templates and insert spoken text into the proper position automatically, based on its interpretation. Cases from the author's consulting experiences and from medical journals emphasize the need for speech macros from a cost-benefit standpoint. A prototype program is introduced that facilitates the process of creating macros. The need for macro management software is reconciled with current research on speech recognition and technology adoption. A planned experiment is discussed.

  1. Performances comparison between three technologies for continuous ethanol production from molasses

    International Nuclear Information System (INIS)

    Bouallagui, Hassib; Touhami, Youssef; Hanafi, Nedia; Ghariani, Amine; Hamdi, Moktar

    2013-01-01

    Molasses are a potential feedstock for ethanol production. The successful application of anaerobic fermentation for ethanol production from molasses is critically dependent to the development and the use of high rate bioreactors. In this study the fermentation of sugar cane molasses by Saccharomyces cerevisiae for the ethanol production in a continuously stirred tank reactor (CSTR), an immobilised cell reactor (ICR) and a membrane reactor (MBR) was investigated. Ethanol production and reactor productivities were compared under different dilution rates (D). When using the CSTR, a decent ethanol productivity (Qp) of 6.8 g L −1 h −1 was obtained at a dilution rate of 0.5 h −1 . The Qp was improved by 48% and the residual sugar concentration was reduced by using the ICR. Intensifying the production of ethanol was investigated in the MBR to achieve a maximum ethanol concentration and a Qp of 46.5 g L −1 and 19.2 g L −1 h −1 , respectively. The achieved results in the MBR worked with high substrate concentration are promising for the scale up operation. -- Highlights: ► We compare three reactors for ethanol production from sugar cane molasses. ► The ethanol productivity of 6.8 g L -1 h -1 was obtained using the CSTR. ► The ethanol productivity was improved by 48% by using the ICR. ► Intensifying ethanol productivity (19.2 g L -1 h -1 ) was investigated in the MBR

  2. Pilot study: Assessing the effect of continual position monitoring technology on compliance with patient turning protocols.

    Science.gov (United States)

    Schutt, Suann Cirigliano; Tarver, Christine; Pezzani, Michelle

    2018-01-01

    The study aim was to evaluate if continual patient position monitoring, taking into account self-turns and clinician-assisted turns, would increase the percentage of time a patient's position changed at least every 2 hr. While patient turning has clinical benefits, current models to help staff remember to turn patients, such as "turn clocks" and timers, have not resulted in high compliance with turning protocols. In addition, reminders are based on arbitrary 2-hr windows (such as turning on "even" hours) rather than on individual patient activity, including self-turns. This is a first inpatient, non-randomized, pre-/postintervention study. Data collection occurred from May 2013-February 2014 on a 39-bed medical unit in a community hospital. Baseline patient turning data were recorded by a sensor; however, the patient data were not displayed at the nurses' station to establish compliance with the hospital's turning protocol. Postintervention, patient position information was wirelessly displayed on nurses' station computer monitors in real time. A Student t test was used to compare baseline to postintervention "mean time in compliance." Data from 138 patients ( N  =   7,854 hr of monitoring) were collected. The baseline phase yielded 4,322 hr of position monitoring data and the postintervention phase yielded 3,532 hr of data. Statistically significant improvement was demonstrated in the percentage of time a patient's position changed at least every 2 hr from baseline to postintervention.

  3. Health Information Technology Continues to Show Positive Effect on Medical Outcomes: Systematic Review.

    Science.gov (United States)

    Kruse, Clemens Scott; Beane, Amanda

    2018-02-05

    Health information technology (HIT) has been introduced into the health care industry since the 1960s when mainframes assisted with financial transactions, but questions remained about HIT's contribution to medical outcomes. Several systematic reviews since the 1990s have focused on this relationship. This review updates the literature. The purpose of this review was to analyze the current literature for the impact of HIT on medical outcomes. We hypothesized that there is a positive association between the adoption of HIT and medical outcomes. We queried the Cumulative Index of Nursing and Allied Health Literature (CINAHL) and Medical Literature Analysis and Retrieval System Online (MEDLINE) by PubMed databases for peer-reviewed publications in the last 5 years that defined an HIT intervention and an effect on medical outcomes in terms of efficiency or effectiveness. We structured the review from the Primary Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA), and we conducted the review in accordance with the Assessment for Multiple Systematic Reviews (AMSTAR). We narrowed our search from 3636 papers to 37 for final analysis. At least one improved medical outcome as a result of HIT adoption was identified in 81% (25/37) of research studies that met inclusion criteria, thus strongly supporting our hypothesis. No statistical difference in outcomes was identified as a result of HIT in 19% of included studies. Twelve categories of HIT and three categories of outcomes occurred 38 and 65 times, respectively. A strong majority of the literature shows positive effects of HIT on the effectiveness of medical outcomes, which positively supports efforts that prepare for stage 3 of meaningful use. This aligns with previous reviews in other time frames. ©Clemens Scott Kruse, Amanda Beane. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 05.02.2018.

  4. Standard drug concentrations and smart-pump technology reduce continuous-medication-infusion errors in pediatric patients.

    Science.gov (United States)

    Larsen, Gitte Y; Parker, Howard B; Cash, Jared; O'Connell, Mary; Grant, MaryJo C

    2005-07-01

    To determine if combining standard drug concentrations with "smart-pump" technology reduces reported medication-infusion errors. Preintervention and postintervention comparison of reported medication errors related to infusion therapies during the calendar years 2002 and 2003. A 242-bed university-affiliated tertiary pediatric hospital. Change in continuous-medication-infusion process, comprising the adoption of (1) standard drug concentrations, (2) "smart" syringe pumps, and (3) human-engineered medication labels. Comparison of reported continuous-medication-infusion errors before and after the intervention. The number of reported errors dropped by 73% for an absolute risk reduction of 3.1 to 0.8 per 1000 doses. Preparation errors that occurred in the pharmacy decreased from 0.66 to 0.16 per 1000 doses; the number of 10-fold errors in dosage decreased from 0.41 to 0.08 per 1000 doses. The use of standard drug concentrations, smart syringe pumps, and user-friendly labels reduces reported errors associated with continuous medication infusions. Standard drug concentrations can be chosen to allow most neonates to receive needed medications without concerns related to excess fluid administration.

  5. Membrane-Based Technologies in the Pharmaceutical Industry and Continuous Production of Polymer-Coated Crystals/Particles.

    Science.gov (United States)

    Chen, Dengyue; Sirkar, Kamalesh K; Jin, Chi; Singh, Dhananjay; Pfeffer, Robert

    2017-01-01

    Membrane technologies are of increasing importance in a variety of separation and purification applications involving liquid phases and gaseous mixtures. Although the most widely used applications at this time are in water treatment including desalination, there are many applications in chemical, food, healthcare, paper and petrochemical industries. This brief review is concerned with existing and emerging applications of various membrane technologies in the pharmaceutical and biopharmaceutical industry. The goal of this review article is to identify important membrane processes and techniques which are being used or proposed to be used in the pharmaceutical and biopharmaceutical operations. How novel membrane processes can be useful for delivery of crystalline/particulate drugs is also of interest. Membrane separation technologies are extensively used in downstream processes for bio-pharmaceutical separation and purification operations via microfiltration, ultrafiltration and diafiltration. Also the new technique of membrane chromatography allows efficient purification of monoclonal antibodies. Membrane filtration techniques of reverse osmosis and nanofiltration are being combined with bioreactors and advanced oxidation processes to treat wastewaters from pharmaceutical plants. Nanofiltration with organic solvent-stable membranes can implement solvent exchange and catalyst recovery during organic solvent-based drug synthesis of pharmaceutical compounds/intermediates. Membranes in the form of hollow fibers can be conveniently used to implement crystallization of pharmaceutical compounds. The novel crystallization methods of solid hollow fiber cooling crystallizer (SHFCC) and porous hollow fiber anti-solvent crystallization (PHFAC) are being developed to provide efficient methods for continuous production of polymer-coated drug crystals in the area of drug delivery. This brief review provides a general introduction to various applications of membrane technologies in

  6. New method for selection of hydrogen peroxide adapted bifidobacteria cells using continuous culture and immobilized cell technology

    Directory of Open Access Journals (Sweden)

    Meile Leo

    2010-07-01

    Full Text Available Abstract Background Oxidative stress can severely compromise viability of bifidobacteria. Exposure of Bifidobacterium cells to oxygen causes accumulation of reactive oxygen species, mainly hydrogen peroxide, leading to cell death. In this study, we tested the suitability of continuous culture under increasing selective pressure combined with immobilized cell technology for the selection of hydrogen peroxide adapted Bifidobacterium cells. Cells of B. longum NCC2705 were immobilized in gellan-xanthan gum gel beads and used to continuously ferment MRS medium containing increasing concentration of H2O2 from 0 to 130 ppm. Results At the beginning of the culture, high cell density of 1013 CFU per litre of reactor was tested. The continuous culture gradually adapted to increasing H2O2 concentrations. However, after increasing the H2O2 concentration to 130 ppm the OD of the culture decreased to 0. Full wash out was prevented by the immobilization of the cells in gel matrix. Hence after stopping the stress, it was possible to re-grow the cells that survived the highest lethal dose of H2O2 and to select two adapted colonies (HPR1 and HPR2 after plating of the culture effluent. In contrast to HPR1, HPR2 showed stable characteristics over at least 70 generations and exhibited also higher tolerance to O2 than non adapted wild type cells. Preliminary characterization of HPR2 was carried out by global genome expression profile analysis. Two genes coding for a protein with unknown function and possessing trans-membrane domains and an ABC-type transporter protein were overexpressed in HPR2 cells compared to wild type cells. Conclusions Our study showed that continuous culture with cell immobilization is a valid approach for selecting cells adapted to hydrogen peroxide. Elucidation of H2O2 adaptation mechanisms in HPR2 could be helpful to develop oxygen resistant bifidobacteria.

  7. Long-Term Continuous Ambulatory ECG Monitors and External Cardiac Loop Recorders for Cardiac Arrhythmia: A Health Technology Assessment

    Science.gov (United States)

    Kabali, Conrad; Xie, Xuanqian; Higgins, Caroline

    2017-01-01

    Background Ambulatory electrocardiography (ECG) monitors are often used to detect cardiac arrhythmia. For patients with symptoms, an external cardiac loop recorder will often be recommended. The improved recording capacity of newer Holter monitors and similar devices, collectively known as longterm continuous ambulatory ECG monitors, suggests that they will perform just as well as, or better than, external loop recorders. This health technology assessment aimed to evaluate the effectiveness, cost-effectiveness, and budget impact of longterm continuous ECG monitors compared with external loop recorders in detecting symptoms of cardiac arrhythmia. Methods Based on our systematic search for studies published up to January 15, 2016, we did not identify any studies directly comparing the clinical effectiveness of longterm continuous ECG monitors and external loop recorders. Therefore, we conducted an indirect comparison, using a 24-hour Holter monitor as a common comparator. We used a meta-regression model to control for bias due to variation in device-wearing time and baseline syncope rate across studies. We conducted a similar systematic search for cost-utility and cost-effectiveness studies comparing the two types of devices; none were found. Finally, we used historical claims data (2006–2014) to estimate the future 5-year budget impact in Ontario, Canada, of continued public funding for both types of longterm ambulatory ECG monitors. Results Our clinical literature search yielded 7,815 non-duplicate citations, of which 12 cohort studies were eligible for indirect comparison. Seven studies assessed the effectiveness of longterm continuous monitors and five assessed external loop recorders. Both types of devices were more effective than a 24-hour Holter monitor, and we found no substantial difference between them in their ability to detect symptoms (risk difference 0.01; 95% confidence interval −0.18, 0.20). Using GRADE for network meta-analysis, we evaluated the

  8. Continuous production of fullerenes and other carbon nanomaterials on a semi-industrial scale using plasma technology

    International Nuclear Information System (INIS)

    Gruenberger, T.M.; Gonzalez-Aguilar, J.; Fulcheri, L.; Fabry, F.; Grivei, E.; Probst, N.; Flamant, G.; Charlier, J.-C.

    2002-01-01

    A new production method is presented allowing the production of bulk quantities of fullerenes and other carbon nanomaterials using a 3-phase thermal plasma (260 kW). The main characteristics of this method lie in the independent control of the carbon throughput by injection of a solid carbon feedstock, and the immediate extraction of the synthesised product from the reactor, allowing production on a continuous basis. The currently investigated plasma facility is of an intermediate scale between lab-size and an industrial pilot plant, ready for further up scaling to an industrial size. The influence of a large number of different carbon precursors, plasma gases and operating conditions on the fullerene yield has been studied. At this state, quantities of up to 1 kg of carbon can be processed per hour with further scope for increase, leading to production rates for this type of materials not achievable with any other technology at present

  9. Upgrade possibilities for continuous wave rf electron guns based on room-temperature very high frequency technology

    Science.gov (United States)

    Sannibale, F.; Filippetto, D.; Johnson, M.; Li, D.; Luo, T.; Mitchell, C.; Staples, J.; Virostek, S.; Wells, R.; Byrd, J. M.

    2017-11-01

    The past decade was characterized by an increasing scientific demand for extending towards higher repetition rates (MHz class and beyond) the performance of already operating lower repetition rate accelerator-based instruments such as x-ray free electron lasers (FELs) and ultrafast electron diffraction (UED) and microscopy (UEM) instruments. Such a need stimulated a worldwide spread of a vibrant R&D activity targeting the development of high-brightness electron sources capable of operating at these challenging rates. Among the different technologies pursued, rf guns based on room-temperature structures resonating in the very high frequency (VHF) range (30-300 MHz) and operating in continuous wave successfully demonstrated in the past few years the targeted brightness and reliability. Nevertheless, recently proposed upgrades for x-ray FELs and the always brightness-frontier applications such as UED and UEM are now requiring a further step forward in terms of beam brightness in electron sources. In this paper, we present a few possible upgrade paths that would allow one to extend, in a relatively simple and cost-effective way, the performance of the present VHF technology to the required new goals.

  10. OFSETH: optical technologies embedded in smart medical textile for continuous monitoring of respiratory motions under magnetic resonance imaging

    Science.gov (United States)

    Narbonneau, F.; De Jonckheere, J.; Jeanne, M.; Kinet, D.; Witt, J.; Krebber, K.; Paquet, B.; Depré, A.; D'Angelo, L. T.; Thiel, T.; Logier, R.

    2010-04-01

    The potential impact of optical fiber sensors embedded into medical textiles for the continuous monitoring of the patient during Magnetic Resonance Imaging (MRI) is now proved. We report how two pure optical technologies can successfully sense textile elongation between, 0% and 3%, while maintaining the stretching properties of the textile substrates for a good comfort of the patient. Investigating influence of different patients' morphology as well as textile integration issues to let free all vitals organs for medical staff actions, the OFSETH harness allows a continuous measurement of respiration movements. For example, anaesthesia for MRI examination uses the same drugs as for any surgical procedure. Even if spontaneous respiration can be preserved most of the time, spontaneous respiration is constantly at risk of being impaired by anaesthetic drugs or by upper airway obstruction. Monitoring of the breathing activity is needed to assess adequate ventilation or to detect specific obstruction patterns. Moreover artefacts due to physiological motions induce a blooming effect on the MRI result. The use of synchronisation devices allows reducing these effects. Positioned at certain strategic places according to the investigated organ, the presented sensors could constitute an efficient and adapted solution for respiratory synchronisation of the MRI acquisition.

  11. High-efficient and high-content cytotoxic recording via dynamic and continuous cell-based impedance biosensor technology.

    Science.gov (United States)

    Hu, Ning; Fang, Jiaru; Zou, Ling; Wan, Hao; Pan, Yuxiang; Su, Kaiqi; Zhang, Xi; Wang, Ping

    2016-10-01

    Cell-based bioassays were effective method to assess the compound toxicity by cell viability, and the traditional label-based methods missed much information of cell growth due to endpoint detection, while the higher throughputs were demanded to obtain dynamic information. Cell-based biosensor methods can dynamically and continuously monitor with cell viability, however, the dynamic information was often ignored or seldom utilized in the toxin and drug assessment. Here, we reported a high-efficient and high-content cytotoxic recording method via dynamic and continuous cell-based impedance biosensor technology. The dynamic cell viability, inhibition ratio and growth rate were derived from the dynamic response curves from the cell-based impedance biosensor. The results showed that the biosensors has the dose-dependent manners to diarrhetic shellfish toxin, okadiac acid based on the analysis of the dynamic cell viability and cell growth status. Moreover, the throughputs of dynamic cytotoxicity were compared between cell-based biosensor methods and label-based endpoint methods. This cell-based impedance biosensor can provide a flexible, cost and label-efficient platform of cell viability assessment in the shellfish toxin screening fields.

  12. Building enterprise-wide resilience by integrating business continuity capability into day-to-day business culture and technology.

    Science.gov (United States)

    Alesi, Patrick

    2008-04-01

    This paper follows the development of the business continuity planning (BCP) programme at Lehman Brothers following the events of September 11th. Previous attempts to implement a `traditional' form of BCP had been ineffective, but following the events, the firm began to look at BCP in a new light. This paper deals with three main themes: creating a culture of resiliency, leveraging technology, and building flexible plans. Distributing accountability for BCP to business line managers, integrating BCP change management into the normal course of business, and providing every employee with personalised BCP information breeds a culture of resiliency where people are empowered to react to events without burdensome, hierarchical response and recovery procedures. Building a strong relationship with one's application development community can result in novel, customised BCP solutions; existing systems and data structures can be used to enhance an existing BCP. Even the best plans are often challenged by events; understanding that flexibility is essential to effective incident response is a critical element in the development of a proper business continuity plan.

  13. Continuous remote monitoring of COPD patients-justification and explanation of the requirements and a survey of the available technologies.

    Science.gov (United States)

    Tomasic, Ivan; Tomasic, Nikica; Trobec, Roman; Krpan, Miroslav; Kelava, Tomislav

    2018-04-01

    Remote patient monitoring should reduce mortality rates, improve care, and reduce costs. We present an overview of the available technologies for the remote monitoring of chronic obstructive pulmonary disease (COPD) patients, together with the most important medical information regarding COPD in a language that is adapted for engineers. Our aim is to bridge the gap between the technical and medical worlds and to facilitate and motivate future research in the field. We also present a justification, motivation, and explanation of how to monitor the most important parameters for COPD patients, together with pointers for the challenges that remain. Additionally, we propose and justify the importance of electrocardiograms (ECGs) and the arterial carbon dioxide partial pressure (PaCO 2 ) as two crucial physiological parameters that have not been used so far to any great extent in the monitoring of COPD patients. We cover four possibilities for the remote monitoring of COPD patients: continuous monitoring during normal daily activities for the prediction and early detection of exacerbations and life-threatening events, monitoring during the home treatment of mild exacerbations, monitoring oxygen therapy applications, and monitoring exercise. We also present and discuss the current approaches to decision support at remote locations and list the normal and pathological values/ranges for all the relevant physiological parameters. The paper concludes with our insights into the future developments and remaining challenges for improvements to continuous remote monitoring systems. Graphical abstract ᅟ.

  14. Business continuity

    International Nuclear Information System (INIS)

    Breunhoelder, Gert

    2002-01-01

    This presentation deals with the following keypoints: Information Technology (IT) Business Continuity and Recovery essential for any business; lessons learned after Sept. 11 event; Detailed planning, redundancy and testing being the key elements for probability estimation of disasters

  15. Variability in and agreement between modeled and personal continuously measured black carbon levels using novel smartphone and sensor technologies.

    Science.gov (United States)

    Nieuwenhuijsen, Mark J; Donaire-Gonzalez, David; Rivas, Ioar; de Castro, Montserrat; Cirach, Marta; Hoek, Gerard; Seto, Edmund; Jerrett, Michael; Sunyer, Jordi

    2015-03-03

    Novel technologies, such as smartphones and small personal continuous air pollution sensors, can now facilitate better personal estimates of air pollution in relation to location. Such information can provide us with a better understanding about whether and how personal exposures relate to residential air pollution estimates, which are normally used in epidemiological studies. The aims of this study were to examine (1) the variability in personal air pollution levels during the day and (2) the relationship between modeled home and school estimates and continuously measured personal air pollution exposure levels in different microenvironments (e.g., home, school, and commute). We focused on black carbon as an indicator of traffic-related air pollution. We recruited 54 school children (aged 7-11) from 29 different schools around Barcelona as part of the BREATHE study, an epidemiological study of the relation between air pollution and brain development. For 2 typical week days during 2012-2013, the children were given a smartphone with CalFit software to obtain information on their location and physical activity level and a small sensor, the micro-aethalometer model AE51, to measure their black carbon levels simultaneously and continuously. We estimated their home and school exposure to PM2.5 filter absorbance, which is well-correlated with black carbon, using a temporally adjusted PM2.5 absorbance land use regression (LUR) model. We found considerable variation in the black carbon levels during the day, with the highest levels measured during commuting periods (geometric mean = 2.8 μg/m(3)) and the lowest levels at home (geometric mean = 1.3 μg/m(3)). Hourly temporally adjusted LUR model estimates for the home and school showed moderate to good correlation with measured personal black carbon levels at home and school (r = 0.59 and 0.68, respectively) and lower correlation with commuting trips (r = 0.32 and 0.21, respectively). The correlation between modeled home

  16. Association of long-term blood pressure variability and brachial-ankle pulse wave velocity: a retrospective study from the APAC cohort.

    Science.gov (United States)

    Wang, Yang; Yang, Yuling; Wang, Anxin; An, Shasha; Li, Zhifang; Zhang, Wenyan; Liu, Xuemei; Ruan, Chunyu; Liu, Xiaoxue; Guo, Xiuhua; Zhao, Xingquan; Wu, Shouling

    2016-02-19

    We investigated associations between long-term blood pressure variability (BPV) and brachial-ankle pulse wave velocity (baPWV). Within the Asymptomatic Polyvascular Abnormalities Community (APAC) study, we retrospectively collected long-term BPV and baPWV measures. Long-term BPV was calculated using the mean and standard deviation of systolic blood pressure (SBP) across 4 years based on annual values of SBP. In total, 3,994 subjects (2,284 men) were eligible for inclusion in this study. We stratified the study population into four SBP quartiles. Left and right baPWV was higher in participants with long-term SBPV in the fourth quartile compared with the first quartile (left: 1,725 ± 488 vs. 1,461 ± 340 [p < 0.001]; right: 1,722 ± 471 vs. 1,455 ± 341 [p < 0.001], respectively). We obtained the same result for total baPWV (fourth vs. first quartile: 1,772 ± 429 vs. 1,492 ± 350 [p < 0.001]). Furthermore, there was a trend for gradually increased baPWV (≥1,400 cm/s) with increased SBPV (p < 0.001). After multivariable adjustment, baPWV was positively correlated with long-term BPV (p < 0.001). In conclusion, long-term BPV is significantly associated with arterial stiffness as assessed by baPWV.

  17. Keeping Up with the Diabetes Technology: 2016 Endocrine Society Guidelines of Insulin Pump Therapy and Continuous Glucose Monitor Management of Diabetes.

    Science.gov (United States)

    Galderisi, Alfonso; Schlissel, Elise; Cengiz, Eda

    2017-09-23

    Decades after the invention of insulin pump, diabetes management has encountered a technology revolution with the introduction of continuous glucose monitoring, sensor-augmented insulin pump therapy and closed-loop/artificial pancreas systems. In this review, we discuss the significance of the 2016 Endocrine Society Guidelines for insulin pump therapy and continuous glucose monitoring and summarize findings from relevant diabetes technology studies that were conducted after the publication of the 2016 Endocrine Society Guidelines. The 2016 Endocrine Society Guidelines have been a great resource for clinicians managing diabetes in this new era of diabetes technology. There is good body of evidence indicating that using diabetes technology systems safely tightens glycemic control while managing both type 1 and type 2 diabetes. The first-generation diabetes technology systems will evolve as we gain more experience and collaboratively work to improve them with an ultimate goal of keeping people with diabetes complication and burden-free until the cure for diabetes becomes a reality.

  18. Using information and communication technology to revitalise continuing professional development for rural health professionals: evidence from a pilot project.

    Science.gov (United States)

    Mugisha, J F

    2009-01-01

    This project revitalised continuing professional development (CPD) among rural health professionals in Uganda, Africa, using information and communication technology (ICT). The project was piloted in 3 rural hospitals where CPD activities were failing to meet demand because activities were not properly coordinated, the meetings were too infrequent, the delivery methods were inappropriate, and the content was highly supply-driven and generally irrelevant to the performance needs of the health workers. The project intervention involved the installation of various ICT equipment including computers, liquid crystal display (LCD) projectors, office copiers, printers, spiral binders and CDs. A number of health workers were also trained in ICT use. Three years later, an evaluation study was conducted using interviews, focus group discussions and document review. The results indicated that there had been a rapid increase in the number of staff attending the CPD sessions, an increased staff mix among participants, improved quality of CPD presentations, increased use of locally produced content, more relevant topics discussed and an increased interest by hospital management in CPD, manifested by commitment of staff training funds. Staff motivation, attitude and responsiveness to clients had also improved as a result of the invigorated CPD activities.

  19. Discontinued Information and Communication Technology Usage among Older Adults in Continuing Care Retirement Communities in the United States.

    Science.gov (United States)

    Rikard, R V; Berkowsky, Ronald W; Cotten, Shelia R

    2018-01-01

    Older adults are increasingly using information and communication technologies (ICTs). Recent studies show beneficial effects of using ICTs for older adults, particularly in terms of reducing loneliness and depression. However, little is known about the factors that may prevent discontinued ICT use in populations that may be at greater risk, such as those in continuing care retirement communities (CCRCs). The purpose of this study is to examine a range of factors that may influence discontinued (1) ICT use, (2) searching for health information, and (3) searching for general information over time among CCRC residents. We use longitudinal data from a randomized controlled trial conducted with residents of 19 CCRCs. We use flexible parametric models to estimate the hazard ratio or hazard rate over 5 waves of data to determine what factors significantly predict discontinued (1) ICT use, (2) health information searching, and (3) general information searching. The analysis reveals that independent living residents who took part in an 8-week ICT training intervention were less likely to stop using ICTs. Age and the number of instrumental activities of daily living (IADL) impairments significantly predicted an increased likelihood of stopping ICT use. When examining specific ICT-related activities, the analysis reveals that independent living residents who took part in the ICT training intervention were less likely to stop searching for health information and general information online. In addition, age and the number of IADL impairments were associated with increased likelihood of discontinued health information searches and discontinued general information searches. ICT training interventions may motivate residents of CCRCs to stay connected by increasing the ICT skill level and promoting confidence, thus decreasing the probability that they will discontinue using ICTs and searching for general information. However, the effects of ICT training on motivating continued ICT

  20. Continuous atmospheric monitoring of the injected CO2 behavior over geological storage sites using flux stations: latest technologies and resources

    Science.gov (United States)

    Burba, George; Madsen, Rodney; Feese, Kristin

    2014-05-01

    Flux stations have been widely used to monitor emission rates of CO2 from various ecosystems for climate research for over 30 years [1]. The stations provide accurate and continuous measurements of CO2 emissions with high temporal resolution. Time scales range from 20 times per second for gas concentrations, to 15-minute, hourly, daily, and multi-year periods. The emissions are measured from the upwind area ranging from thousands of square meters to multiple square kilometers, depending on the measurement height. The stations can nearly instantaneously detect rapid changes in emissions due to weather events, as well as changes caused by variations in human-triggered events (pressure leaks, control releases, etc.). Stations can also detect any slow changes related to seasonal dynamics and human-triggered low-frequency processes (leakage diffusion, etc.). In the past, station configuration, data collection and processing were highly-customized, site-specific and greatly dependent on "school-of-thought" practiced by a particular research group. In the last 3-5 years, due to significant efforts of global and regional CO2 monitoring networks (e.g., FluxNet, Ameriflux, Carbo-Europe, ICOS, etc.) and technological developments, the flux station methodology became fairly standardized and processing protocols became quite uniform [1]. A majority of current stations compute CO2 emission rates using the eddy covariance method, one of the most direct and defensible micrometeorological techniques [1]. Presently, over 600 such flux stations are in operation in over 120 countries, using permanent and mobile towers or moving platforms (e.g., automobiles, helicopters, and airplanes). Atmospheric monitoring of emission rates using such stations is now recognized as an effective method in regulatory and industrial applications, including carbon storage [2-8]. Emerging projects utilize flux stations to continuously monitor large areas before and after the injections, to locate and

  1. Maintaining Continuity of Knowledge (CoK) of Spent Fuel Pools: Tool Survey - Scenarios, Technology Considerations, and Evaluation Criteria

    Energy Technology Data Exchange (ETDEWEB)

    Benz, Jacob M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Tanner, Jennifer E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Smart, Heidi A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); MacDougall, Matthew R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-01-18

    The objective of this report is to identify the foundational elements which will drive the survey and evaluation of potential technologies to be considered to maintain CoK of spent fuel within a pool in the potential absence of light or in low light scenarios. These foundational elements include identifying use cases that highlight the type of environments in which the technologies may be asked to operate; the CoK elements required of the technologies, such as unique identification or presence/absence identification; the functional and operational requirements for the technologies; and the criteria against which the technologies will be evaluated.

  2. Cinderella's Coach or Just Another Pumpkin? Information Communication Technologies and the Continuing Marginalisation of Languages in Australian Schools

    Science.gov (United States)

    Norris, Lindy; Coutas, Penelope

    2014-01-01

    The rhetoric around global connectedness and advances in information communication technologies (ICTs) suggests that: Professional life for the marginalised and isolated language teacher should be easier; the experience of language learners in Australian schools should be more meaningful and bring them closer to the languages and communities that…

  3. A Technique for Continuous Evaluation of Student Performance in Two Different Domains: Structural Engineering and Computer Information Technology

    Science.gov (United States)

    Desai, Niranjan; Stefanek, George

    2017-01-01

    Student access to the Internet has made it much easier for students to find solutions to traditional homework problems online and thereby has made this traditional assessment method of monitoring student progress and gauging the assimilation of knowledge in engineering and technology courses less reliable. This paper presents an in-class,…

  4. Glucose monitoring technologies - complementary or competitive? Role of continuous glucose monitoring versus flash glucose monitoring versus self-monitoring of blood glucose

    Directory of Open Access Journals (Sweden)

    Jothydev Kesavadev

    2017-01-01

    Full Text Available We have numerous technologies that can help keep a close watch on an individual's glycaemic status and thereby assist in developing successful diabetes management strategies. For more than five decades, self-monitoring of blood glucose (SMBG has remained as the gold standard tool to manage glycaemic status and has gained huge acceptance. Rigorous research further led to the development of more and more advanced technologies such as continuous glucose monitoring and flash glucose monitoring. These novel technologies are more promising in terms of revealing the complete glycaemic picture and even more user-friendly than the already established blood glucosemetres. However, they are yet to achieve remarkable accuracy and performance. There will also be a subgroup of patients who will be using these technologies only occasionally and thus will definitely require SMBG at other times. Again, with regard to the retrospective ones, glucose data can be obtained only once they are downloaded to the system and hence, real-time values will still have to be procured with the help of an SMBG. In future when the accuracy and performance of these newer technologies become equal to that of glucometres, the glucometres might vanish. Until then, all these technologies will definitely go hand-in-hand and supplement each other than competing each other. All the related literature were retrieved from various databases including 'PubMed' and 'Cochrane Database of Systematic Reviews' using specific search terms that were relevant to the topics discussed this manuscript.

  5. Effects of mixing technologies on continuous methyl ester production: Comparison of using plug flow, static mixer, and ultrasound clamp

    International Nuclear Information System (INIS)

    Somnuk, Krit; Prasit, Tanongsak; Prateepchaikul, Gumpon

    2017-01-01

    Highlights: • Four types of continuous reactors were compared with methyl ester conversion. • Plug flow, static mixer, ultrasound clamp, SM with ultrasound reactors were tested. • The 16 × 400 W ultrasound clamps were operated at 20 kHz frequency for US reactor. • The US reactor was clearly superior over the other types of continuous reactor. • The US reactor was the most effective alternative with short reactor length. - Abstract: Four types of continuous reactors, namely plug flow reactor (PF), static mixer reactor (SM), ultrasound clamp on tubular reactor (US), and static mixer combined with ultrasound (SM/US) were compared for their purities of methyl ester in biodiesel production from refined palm oil (RPO). The reactor conditions were: KOH 4, 6, 8, 10, and 12 g L −1 , methanol content 20 vol.%, and under 20 L h −1 RPO flow rate at 60 °C temperature. The highest purity of methyl esters: 81.99 wt.% for PF, 95.70 wt.% for SM, 98.98 wt.% for US, and 97.67 wt.% for SM/US, were achieved with 900 mm, 900 mm, 700 mm, and 900 mm reactor lengths respectively, and 12 g L −1 of KOH was used in all cases. The 16 × 400 W ultrasound clamp was operated at 20 kHz frequency, and among short length reactors the US case was more effective than PF, SM, or SM/US. Moreover, ester purity from the US reactor was slightly decreased by the lowest 4 g L −1 KOH. The US reactor was clearly superior over the other types of continuous reactor, and had the potential to reduce KOH consumption by sonochemical effects on the base-catalyzed transesterification reaction.

  6. Technological Possibilities of Si:H Thin Film Deposition with Embedded Cubic Mg2Si Nanoparticles

    Czech Academy of Sciences Publication Activity Database

    Galkin, N.G.; Galkin, K.N.; Chernev, I.M.; Fajgar, Radek; Stuchlíková, The-Ha; Remeš, Zdeněk; Stuchlík, Jiří

    2013-01-01

    Roč. 10, č. 12 (2013), s. 1712-1716 ISSN 1862-6351. [Asia-Pacific Conference on Green Technology with Silicides and Related Materials (APAC-SILICIDE 2013) /3./. Tsukuba, Ibaraki, 27.07.2013-29.07.2013] R&D Projects: GA ČR GA13-25747S Grant - others:MŠMT(CZ) LH12236; RFB(RU) 13-02-00046 Program:LH Institutional support: RVO:67985858 ; RVO:68378271 Keywords : Mg2Si * nanoparticles * technology Subject RIV: CA - Inorganic Chemistry; BM - Solid Matter Physics ; Magnetism (FZU-D)

  7. Real-time process monitoring in a semi-continuous fluid-bed dryer - microwave resonance technology versus near-infrared spectroscopy.

    Science.gov (United States)

    Peters, Johanna; Teske, Andreas; Taute, Wolfgang; Döscher, Claas; Höft, Michael; Knöchel, Reinhard; Breitkreutz, Jörg

    2018-02-15

    The trend towards continuous manufacturing in the pharmaceutical industry is associated with an increasing demand for advanced control strategies. It is a mandatory requirement to obtain reliable real-time information on critical quality attributes (CQA) during every process step as the decision on diversion of material needs to be performed fast and automatically. Where possible, production equipment should provide redundant systems for in-process control (IPC) measurements to ensure continuous process monitoring even if one of the systems is not available. In this paper, two methods for real-time monitoring of granule moisture in a semi-continuous fluid-bed drying unit are compared. While near-infrared (NIR) spectroscopy has already proven to be a suitable process analytical technology (PAT) tool for moisture measurements in fluid-bed applications, microwave resonance technology (MRT) showed difficulties to monitor moistures above 8% until recently. The results indicate, that the newly developed MRT sensor operating at four resonances is capable to compete with NIR spectroscopy. While NIR spectra were preprocessed by mean centering and first derivative before application of partial least squares (PLS) regression to build predictive models (RMSEP = 0.20%), microwave moisture values of two resonances sufficed to build a statistically close multiple linear regression (MLR) model (RMSEP = 0.07%) for moisture prediction. Thereby, it could be verified that moisture monitoring by MRT sensor systems could be a valuable alternative to NIR spectroscopy or could be used as a redundant system providing great ease of application. Copyright © 2017 Elsevier B.V. All rights reserved.

  8. Improved imaging system for hard-copy film with use of a continuous-tone electrophotographic process and liquid toner technology

    International Nuclear Information System (INIS)

    Lee, D.L.Y.; Mulvaney, J.A.

    1987-01-01

    A Du Pont hard-copy imaging system is described that incorporates a continuous-tone electrophotographic process, liquid toner technology, and an improved writing scheme to produce hard-copy images on a transparent film base with better resolution and lower noise than conventional video cameras. Bar pattern images from the SMPTE test pattern are seen much better with this imaging system than with conventional video cameras. MTFs demonstrating the improved resolution are presented. The improved writing scheme reduces phosphor noise by a factor of four and virtually eliminates raster scan lines and microbanding caused by nonuniform transport and vibration. Digital lookup tables produce a linear gray-scale output or other gray-scale outputs if desired. Image capture, exposing, and processing all take place within the imager in about 1 minute, eliminating the need for cassettes and darkrooms

  9. Knowledge management in R&D centres, in the field of biomedicine, using contemporary information and communication technology and the methodology of continuous improvement

    Directory of Open Access Journals (Sweden)

    Ryszard Depta

    2015-09-01

    Full Text Available Some sophisticated medical applications, including advanced therapeutics with monoclonal antibodies, stem cells, and gene therapies are currently available in clinical trials. More revolutionary technologies are coming soon and will be marketed by the best technically advanced companies in the world. R&D companies with a much smaller indicator of technological progress and organizational efficiency, but with a great desire to become a major player in this industry, will also compete for a share of this market. However, in order to become a fixture in the changes initiated, both must constantly learn and be more innovative. In the current market situation, a hypercompetitive economy with the entrepreneurs’ focus on the prosumer, creativity is becoming extremely important in achieving final success. Creativity, which is the result of proper knowledge management, especially in science. The market value of R&D companies and their further future depends to a large extent on the prosperity of knowledge transfer. The most important role in the process of knowledge transfer is played by information and communication technologies (ICT and tools for continuous improvement. If companies implement these efficiently and safely, they can develop and benefit from competitive advantages for a very long period of time. Such an approach would give them the possibility of reducing the cost and time to deliver new products to market, and create a new platform to generate innovative products. This is a new perspective for R&D businesses, and a great opportunity for institutions in the biomedical arena to become part of the upcoming bio-revolution.

  10. Technology.

    Science.gov (United States)

    Online-Offline, 1998

    1998-01-01

    Focuses on technology, on advances in such areas as aeronautics, electronics, physics, the space sciences, as well as computers and the attendant progress in medicine, robotics, and artificial intelligence. Describes educational resources for elementary and middle school students, including Web sites, CD-ROMs and software, videotapes, books,…

  11. Nível de satisfação dos idosos usuários de próteses auditivas doadas pela APAC-NAMI UNIFOR - doi:10.5020/18061230.2005.p7

    Directory of Open Access Journals (Sweden)

    Ana Cristina Martins Batista

    2012-01-01

    Full Text Available A pesquisa objetivou conhecer o nível de satisfação dos pacientes idosos, usuários de próteses auditivas, doadas pela APAC (autorização de atendimento de alta complexidade conveniada com o NAMI – UNIFOR (Universidade Fortaleza. Foram entrevistados, através de aplicação de questionário, 20 pacientes, a partir de 60 anos de idade, de ambos os sexos, beneficiados por doação de AASI (Aparelho de Amplificação Sonora Individual há pelo menos 4 meses. Verificou-se o predomínio do gênero masculino à solicitação de próteses auditivas totalizando 12 pacientes (60%, a presbiacusia revelou-se como causa predominante em 12 pacientes (60%; o tipo de prótese auditiva mais indicada foi a retroauricular em 14 pacientes (70%; observou-se maior rendimento da prótese nos itens relacionados ao uso do mesmo na televisão (60%, conversa (60%, música (60%, conversa na rua (40% e igreja (45%; houve menor satisfação do uso da prótese no shopping center (20% e banco (20%. Quanto às queixas dos usuários, foi referido o uso da prótese em ambientes com sons intensos (25%, seguido do item relacionado ao manuseio dos controles (20%. A aplicação do questionário demonstrou bom nível de satisfação dos pacientes, porém verificou-se que, em determinados ambientes, houve reduzida experienciação por parte dos mesmos, revelando, provavelmente, um estilo de vida mais doméstico.

  12. Technology

    Directory of Open Access Journals (Sweden)

    Xu Jing

    2016-01-01

    Full Text Available The traditional answer card reading method using OMR (Optical Mark Reader, most commonly, OMR special card special use, less versatile, high cost, aiming at the existing problems proposed a method based on pattern recognition of the answer card identification method. Using the method based on Line Segment Detector to detect the tilt of the image, the existence of tilt image rotation correction, and eventually achieve positioning and detection of answers to the answer sheet .Pattern recognition technology for automatic reading, high accuracy, detect faster

  13. Design and Evaluation of Topical Diclofenac Sodium Gel Using Hot Melt Extrusion Technology as a Continuous Manufacturing Process with Kolliphor® P407.

    Science.gov (United States)

    Pawar, Jaywant; Narkhede, Rajkiran; Amin, Purnima; Tawde, Vaishali

    2017-08-01

    The aim of the present context was to develop and evaluate a Kolliphor® P407-based transdermal gel formulation of diclofenac sodium by hot melt extrusion (HME) technology; central composite design was used to optimize the formulation process. In this study, we have explored first time ever HME as an industrially feasible and continuous manufacturing technology for the manufacturing of gel formulation using Kolliphor® P407 and Kollisolv® PEG400 as a gel base. Diclofenac sodium was used as a model drug. The HME parameters such as feeding rate, screw speed, and barrel temperature were crucial for the semisolid product development, and were optimized after preliminary trials. For the processing of the gel formulation by HME, a modified screw design was used to obtain a uniform product. The obtained product was evaluated for physicochemical characterization such as differential scanning calorimetry (DSC), X-ray diffraction (XRD), pH measurement, rheology, surface tension, and texture profile analysis. Moreover, it was analyzed for general appearance, spreadibility, surface morphology, and drug content. The optimized gel formulation showed homogeneity and transparent film when applied on a glass slide under microscope, pH was 7.02 and uniform drug content of 100.04 ± 2.74 (SD = 3). The DSC and XRD analysis of the HME gel formulation showed complete melting of crystalline API into an amorphous form. The Kolliphor® P407 and Kollisolv® PEG400 formed excellent gel formulation using HME with consistent viscoelastic properties of the product. An improved drug release was found for the HME gel, which showed a 100% drug release than that of a marketed product which showed only 88% of drug release at the end of 12 h. The Flux value of the HME gel was 106 than that of a marketed formulation, which showed only about 60 value, inferring a significant difference (P < 0.05) at the end of 1 h. This study demonstrates a novel application of the hot melt extrusion

  14. Comparison of Glucose Area Under the Curve Measured Using Minimally Invasive Interstitial Fluid Extraction Technology with Continuous Glucose Monitoring System in Diabetic Patients

    Directory of Open Access Journals (Sweden)

    Mei Uemura

    2017-07-01

    Full Text Available BackgroundContinuous glucose monitoring (CGM is reported to be a useful technique, but difficult or inconvenient for some patients and institutions. We are developing a glucose area under the curve (AUC monitoring system without blood sampling using a minimally invasive interstitial fluid extraction technology (MIET. Here we evaluated the accuracy of interstitial fluid glucose (IG AUC measured by MIET in patients with diabetes for an extended time interval and the potency of detecting hyperglycemia using CGM data as a reference.MethodsThirty-eight inpatients with diabetes undergoing CGM were enrolled. MIET comprised a pretreatment step using a plastic microneedle array and glucose accumulation step with a hydrogel patch, which was placed on two sites from 9:00 AM to 5:00 PM or from 10:00 PM to 6:00 AM. IG AUC was calculated by accumulated glucose extracted by hydrogel patches using sodium ion as standard. ResultsA significant correlation was observed between the predicted AUC by MIET and CGM in daytime (r=0.76 and nighttime (r=0.82. The optimal cutoff for the IG AUC value of MIET to predict hyperglycemia over 200 mg/dL measured by CGM for 8 hours was 1,067.3 mg·hr/dL with 88.2% sensitivity and 81.5% specificity.ConclusionWe showed that 8-hour IG AUC levels using MIET were valuable in estimating the blood glucose AUC without blood sampling. The results also supported the concept of using this technique for evaluating glucose excursion and for screening hyperglycemia during 8 hours in patients with diabetes at any time of day.

  15. Analysis of Factors in Technological and Vocational School Teachers' Perceived Organizational Innovative Climate and Continuous Use of E-Teaching: Using Computer Self-Efficacy as an Intervening Variable

    Science.gov (United States)

    Chou, Chun-Mei; Hsiao, His-Chi; Shen, Chien-Hua; Chen, Su-Chang

    2010-01-01

    This study aims to analyze the correlation (N = 335) among technological and vocational school teachers' perceived organizational innovative climate, computer self-efficacy, and continuous use of e-teaching in Taiwan. Teachers' perceived organizational innovative climate includes five factors, namely, job autonomy, innovative leadership, resource…

  16. Expanding the Technology Acceptance Model with the Inclusion of Trust, Social Influence, and Health Valuation to Determine the Predictors of German Users’ Willingness to Continue using a Fitness App : A Structural Equation Modeling Approach

    NARCIS (Netherlands)

    Beldad, Ardion Daroca; Hegner, Sabrina

    2017-01-01

    According to one market research, fitness or running apps are hugely popular in Germany. Such a trend prompts the question concerning the factors influencing German users’ intention to continue using a specific fitness app. To address the research question, the expanded Technology Acceptance Model

  17. Experimental and modelling studies on continuous synthesis and refining of biodiesel in a dedicated bench scale unit using centrifugal contactor separator technology

    NARCIS (Netherlands)

    Abduh, Muhammad Yusuf; Martinez, Alberto Fernandez; Kloekhorst, Arjan; Manurung, Robert; Heeres, Hero J.

    Continuous synthesis and refining of biodiesel (FAME) using a laboratory scale bench scale unit was explored. The unit consists of three major parts: (i) a continuous centrifugal contactor separator (CCCS) to perform the reaction between sunflower oil and methanol; (ii) a washing unit for the crude

  18. Expanding the Technology Acceptance Model with the Inclusion of Trust, Social Influence, and Health Valuation to Determine the Predictors of German Users’ Willingness to Continue using a Fitness App: A Structural Equation Modeling Approach

    OpenAIRE

    Beldad, Ardion Daroca; Hegner, Sabrina

    2017-01-01

    According to one market research, fitness or running apps are hugely popular in Germany. Such a trend prompts the question concerning the factors influencing German users’ intention to continue using a specific fitness app. To address the research question, the expanded Technology Acceptance Model (with the addition of trust, social influence, and health valuation) was tested with 476 German users of fitness apps. Structural equation modeling results reveal that respondents’ intention to cont...

  19. Continuous tokamaks

    International Nuclear Information System (INIS)

    Peng, Y.K.M.

    1978-04-01

    A tokamak configuration is proposed that permits the rapid replacement of a plasma discharge in a ''burn'' chamber by another one in a time scale much shorter than the elementary thermal time constant of the chamber first wall. With respect to the chamber, the effective duty cycle factor can thus be made arbitrarily close to unity minimizing the cyclic thermal stress in the first wall. At least one plasma discharge always exists in the new tokamak configuration, hence, a continuous tokamak. By incorporating adiabatic toroidal compression, configurations of continuous tokamak compressors are introduced. To operate continuous tokamaks, it is necessary to introduce the concept of mixed poloidal field coils, which spatially groups all the poloidal field coils into three sets, all contributing simultaneously to inducing the plasma current and maintaining the proper plasma shape and position. Preliminary numerical calculations of axisymmetric MHD equilibria in continuous tokamaks indicate the feasibility of their continued plasma operation. Advanced concepts of continuous tokamaks to reduce the topological complexity and to allow the burn plasma aspect ratio to decrease for increased beta are then suggested

  20. Internationalizing undergraduate psychology education: Trends, techniques, and technologies.

    Science.gov (United States)

    Takooshian, Harold; Gielen, Uwe P; Plous, Scott; Rich, Grant J; Velayo, Richard S

    2016-01-01

    How can we best internationalize undergraduate psychology education in the United States and elsewhere? This question is more timely than ever, for at least 2 reasons: Within the United States, educators and students seek greater contact with psychology programs abroad, and outside the United States, psychology is growing apace, with educators and students in other nations often looking to U.S. curricula and practices as models. In this article, we outline international developments in undergraduate psychology education both in the United States and abroad, and analyze the dramatic rise of online courses and Internet-based technologies from an instructional and international point of view. Building on the recommendations of the 2005 APA Working Group on Internationalizing the Undergraduate Psychology Curriculum, we then advance 14 recommendations on internationalizing undergraduate psychology education--for students, faculty, and institutions. (c) 2016 APA, all rights reserved).

  1. Continuous digital health

    NARCIS (Netherlands)

    Van Halteren, Aart; Gay, Vaĺerie

    2015-01-01

    A transformation is underway regarding how we deal with our health, not only because mobile Internet technology has made it possible to have continuous access to personal health information, but also because breaking the trend of ever-growing healthcare costs is increasingly necessary. Connectivity,

  2. Continuous quality improvement

    International Nuclear Information System (INIS)

    Bourne, P.B.

    1985-01-01

    This paper describes the various statistical tools used at the Hanford Engineering Development Laboratory to achieve continuous quality improvement in the development of Breeder Reactor Technology and in reactor operations. The role of the quality assurance professionals in this process, including quantifiable measurements using actual examples, is provided. The commitment to quality improvement through top management involvement is dramatically illustrated

  3. Las nuevas tecnologías y la formación médica continuada a distancia The new technologies and the distance continuing medical education

    Directory of Open Access Journals (Sweden)

    Helena Segura Badia

    2006-09-01

    Full Text Available Tras analizar las ventajas e inconvenientes de las FMC a distancia, se contemplan las tres tipologías básicas: provisión de contenidos (enfoque tradicional, gestión de contenidos (enfoque tradicional con las nuevas tecnologías y "on-line" (procesos de aprendizaje y comunicación. Entre los elementos que definen la calidad de los programas formativos a distancia se destacan los tecnológicos, metodológicos y evaluativos. Entre los primeros se incluyen las plataformas, los estándares y la estructura del programa; entre los segundos, los tutores, el diseño de los contenidos , los sistemas de comunicación y las herramientas para crear actividades; y, finalmente, entre los evaluativos, destacan las tipologías destinadas a la evaluación de contenidos, de aprendizaje y de práctica.The advantages and disadvantages of the distance CME are considered, analyzing the three fundamental typologies: contents' offer (traditional approach,, contents' management (traditional approach plus new technologies and "on-line" offer (learning processes and communication. Among the elements related to the quality of the distance CME programmes one can identify the following three essentials: technology, methodology and evaluation. Technology's elements include the platforms, standards and programme's structure. The tutors, contents' design, communication systems and tools to generate activities are the fundamental elements of the methodologies. Finally, among the evaluation one can identify the different procedures aimed to assess the contents, the learning and the practice (performance.

  4. Continuation calculus

    Directory of Open Access Journals (Sweden)

    Bram Geron

    2013-09-01

    Full Text Available Programs with control are usually modeled using lambda calculus extended with control operators. Instead of modifying lambda calculus, we consider a different model of computation. We introduce continuation calculus, or CC, a deterministic model of computation that is evaluated using only head reduction, and argue that it is suitable for modeling programs with control. It is demonstrated how to define programs, specify them, and prove them correct. This is shown in detail by presenting in CC a list multiplication program that prematurely returns when it encounters a zero. The correctness proof includes termination of the program. In continuation calculus we can model both call-by-name and call-by-value. In addition, call-by-name functions can be applied to call-by-value results, and conversely.

  5. Continual improvement plan

    Science.gov (United States)

    1994-01-01

    NASA's approach to continual improvement (CI) is a systems-oriented, agency-wide approach that builds on the past accomplishments of NASA Headquarters and its field installations and helps achieve NASA's vision, mission, and values. The NASA of the future will fully use the principles of continual improvement in every aspect of its operations. This NASA CI plan defines a systematic approach and a model for continual improvement throughout NASA, stressing systems integration and optimization. It demonstrates NASA's constancy of purpose for improvement - a consistent vision of NASA as a worldwide leader in top-quality science, technology, and management practices. The CI plan provides the rationale, structures, methods, and steps, and it defines NASA's short term (1-year) objectives for improvement. The CI plan presents the deployment strategies necessary for cascading the goals and objectives throughout the agency. It also provides guidance on implementing continual improvement with participation from top leadership and all levels of employees.

  6. Use of mobile device technology to continuously collect patient-reported symptoms during radiation therapy for head and neck cancer: A prospective feasibility study.

    Science.gov (United States)

    Falchook, Aaron D; Tracton, Gregg; Stravers, Lori; Fleming, Mary E; Snavely, Anna C; Noe, Jeanne F; Hayes, David N; Grilley-Olson, Juneko E; Weiss, Jared M; Reeve, Bryce B; Basch, Ethan M; Chera, Bhishamjit S

    2016-01-01

    Accurate assessment of toxicity allows for timely delivery of supportive measures during radiation therapy for head and neck cancer. The current paradigm requires weekly evaluation of patients by a provider. The purpose of this study is to evaluate the feasibility of monitoring patient reported symptoms via mobile devices. We developed a mobile application for patients to report symptoms in 5 domains using validated questions. Patients were asked to report symptoms using a mobile device once daily during treatment or more often as needed. Clinicians reviewed patient-reported symptoms during weekly symptom management visits and patients completed surveys regarding perceptions of the utility of the mobile application. The primary outcome measure was patient compliance with mobile device reporting. Compliance is defined as number of days with a symptom report divided by number of days on study. There were 921 symptom reports collected from 22 patients during treatment. Median reporting compliance was 71% (interquartile range, 45%-80%). Median number of reports submitted per patient was 34 (interquartile range, 21-53). Median number of reports submitted by patients per week was similar throughout radiation therapy and there was significant reporting during nonclinic hours. Patients reported high satisfaction with the use of mobile devices to report symptoms. A substantial percentage of patients used mobile devices to continuously report symptoms throughout a course of radiation therapy for head and neck cancer. Future studies should evaluate the impact of mobile device symptom reporting on improving patient outcomes.

  7. Defining the Continuing Education Professional.

    Science.gov (United States)

    English, John K.

    1992-01-01

    A job description for continuing education practitioners includes 11 domains and the job responsibilities for each: client management, external marketing, internal marketing, strategic planning, administration, program development, technology management, adult learning, personal development, career management, and community and professional…

  8. A comparative study of technologies for the continuous measurements of the biochemical demand for oxygen and toxicity of water; Estudio comparativo de tecnologias de medicion en continuo de la demanda bioquimica de oxigeno y de la toxicidad en aguas

    Energy Technology Data Exchange (ETDEWEB)

    Diez-Caballero Arnau, T.; Rodriguez Albalat, G.; Rosa de la Garcia, S.; Jimenez Bono, M.; Millan Navarro, C.; prats, R.; Serramia, A.; Miguel, S. de

    2002-07-01

    The Prevention and Integrated Control of Contamination Act (Ley de Prevencion y control Integrado de la Contaminacion) was passed by the Spanish parliament on 13 June. the basic purpose of this law is to prevent, reduce and control contamination of the atmosphere, water and soil caused by the most contaminating industrial activities. Public sector bodies and private companies in Spanish have been invited by the European Union to adopt new technologies in their production processes with a view to cutting down emissions, minimising or re-using waste, and pre-treating or purifying effluents. I t is therefore extremely appropriate to make available information on new tools of analysis that allow users to take preventive measures to reduce the impact their activity may have on the environment. A fundamental parameter in monitoring water is the Biological Demand for Oxygen (BOD). Various different chemical, physical and biological techniques have been developed to solve the problem of continuously monitoring the BOD and toxicity of water. This study carried out a comparative analysis of these techniques, describing the advantages and disadvantages of applying them to water quality control. At the present time it can be said that the BOD microbiosensor. Multisens 304 is the best available technology for monitoring this parameter. The articles tells us why. (Author) 8 refs.

  9. Continuing Education for Distance Librarians

    Science.gov (United States)

    Cassner, Mary; Adams, Kate E.

    2012-01-01

    Distance librarians as engaged professionals work in a complex environment of changes in technologies, user expectations, and institutional goals. They strive to keep current with skills and competencies to support distance learners. This article provides a selection of continuing education opportunities for distance librarians, and is relevant…

  10. Technology cycles and technology revolutions

    Energy Technology Data Exchange (ETDEWEB)

    Paganetto, Luigi; Scandizzo, Pasquale Lucio

    2010-09-15

    Technological cycles have been characterized as the basis of long and continuous periods economic growth through sustained changes in total factor productivity. While this hypothesis is in part consistent with several theories of growth, the sheer magnitude and length of the economic revolutions experienced by humankind seems to indicate surmise that more attention should be given to the origin of major technological and economic changes, with reference to one crucial question: role of production and use of energy in economic development.

  11. Continuing Intense Malaria Transmission in Northern Uganda

    Science.gov (United States)

    Proietti, Carla; Pettinato, Davide D.; Kanoi, Bernard N.; Ntege, Edward; Crisanti, Andrea; Riley, Eleanor M.; Egwang, Thomas G.; Drakeley, Chris; Bousema, Teun

    2011-01-01

    Recent reports of reductions in malaria transmission in several African countries have resulted in optimism that malaria can be eliminated in parts of Africa where it is currently endemic. It is not known whether these trends are global or whether they are also present in areas where political instability has hindered effective malaria control. We determined malaria parasite carriage and age-dependent antibody responses to Plasmodium falciparum antigens in cross-sectional surveys in Apac, northern Uganda that was affected by political unrest. Under-five parasite prevalence was 55.8% (115/206) by microscopy and 71.9% (41/57) by polymerase chain reaction. Plasmodium ovale alone, or as a co-infection, was detected in 8.6% (12/139) and Plasmodium malariae in 4.3% (6/139) of the infections. Age seroprevalence curves gave no indication of recent changes in malaria transmission intensity. Malaria control remains a tremendous challenge in areas that have not benefited from large-scale interventions, illustrated here by the district of Apac. PMID:21540398

  12. Technology in Residence.

    Science.gov (United States)

    Fox, Jordan

    1999-01-01

    Discusses the necessity for incorporating current technology in today's college residence halls to meet the more diverse and continued activities of its students. Technology addressed covers data networking and telecommunications, heating and cooling systems, and fire-safety systems. (GR)

  13. Continuous training and certification in neonatal resuscitation in remote areas using a multi-platform information and communication technology intervention, compared to standard training: A randomized cluster trial study protocol [version 3; referees: 2 approved

    Directory of Open Access Journals (Sweden)

    Carlos Alberto Delgado

    2018-03-01

    Full Text Available Background: About 10% of all newborns may have difficulty breathing and require support by trained personnel. In Peru, 90% of deliveries occur in health facilities. However, there is not a national neonatal resuscitation and certification program for the public health sector. In addition, the Andes and the Amazon regions concentrate large rural remote areas, which further limit the implementation of training programs and the accomplishment of continuous certification. Neonatal resuscitation training through the use of information, communication and technology (ICT tools running on computers, tablets or mobile phones, may overcome such limitations. This strategy allows online and offline access to educational resources, paving the way to more frequent and efficient training and certification processes. Objective: To evaluate the effects of a neonatal resuscitation training and certification program that uses a multi-platform ICT (MP-ICT strategy on neonatal health care in remote areas. Methods: We propose to conduct the study through a cluster-randomized trial, where the study and analysis unit is the health care facility. Eligible facilities will include primary and secondary health care level facilities that are located in provinces with neonatal mortality rates higher than 15 per 1,000 live births. We will compare the proportion of newborns with a heart rate ≥100 beats per minute at two minutes after birth in health care facilities that receive MP-ICT training and certification implementation, with those that receive standard training and certification. Discussion: We expect that the intervention will be shown as more effective than the current standard of care. We are prepared to include it within a national neonatal resuscitation training and certification program to be implemented at national scale together with policymakers and other key stakeholders.  Trial registration: ClinicalTrials.gov Nº NCT03210194  Status of the study: This

  14. Continuous Markovian Logics

    DEFF Research Database (Denmark)

    Mardare, Radu Iulian; Cardelli, Luca; Larsen, Kim Guldstrand

    2012-01-01

    Continuous Markovian Logic (CML) is a multimodal logic that expresses quantitative and qualitative properties of continuous-time labelled Markov processes with arbitrary (analytic) state-spaces, henceforth called continuous Markov processes (CMPs). The modalities of CML evaluate the rates...

  15. Completely continuous and weakly completely continuous abstract ...

    Indian Academy of Sciences (India)

    approximate identity for B, bounded in A. In addition, a necessary condition for the weak complete continuity of A is ... continuous elements of a Banach algebra A and symmetric abstract Segal algebras B with respect to A, in the case ..... [13] Hewitt E and Ross K A, Abstract harmonic analysis, 2nd edn. I, II (1970) (New York,.

  16. Redefining continuing education delivery.

    Science.gov (United States)

    Carlton, K H

    1997-01-01

    Just as technology is transforming the delivery of education, the Internet and advanced telecommunication applications are changing the "face" of CE and the connotation of "lifelong learning." As late as the mid-1980s, a discussion of computer applications in nursing CE focused on the "timely" transition to microcomputers as tools for the enhancement of managerial tasks for increased productivity. Even as recently as 1990, there seemed to be "time" for those providers who were "slower to adopt innovation" to "catch up." Now, the CE provider who does not integrate the microcomputer and advanced telecommunications as an integral component of their delivery modalities may be outsourced rapidly by an educational or commercial competitive unit that is able to utilize the communication medium, mergers and partnerships, enterprise, and individual lifestyle and learning patterns that will epitomize the CE unit of the 21st century. As with the "re-engineering" of nursing education, the "re-engineered" delivery modalities of evolving CE entity might now best be conceptualized on a continuum from the traditional mode that time and place dependent to a mode of synchronous and asynchronous data and advanced telecommunication. Delivery methods will need to be selected according to the target populations, content, and situation. The health-care educational provider may discover, as in other industries, that a combination of distance and residential offerings will be the most successful medium for the delivery of CE to the progressively more "information and technologically savvy" lifelong learner of the 21st century. In addressing the dramatic effects of the information technology era on the refocused multimedia/interactive delivery method for student education, educators amply quoted Bob Dylan's phrase of the 1960s, "The times, they are a-changing." And so, we see that the times are also changing at an astronomical rate for the health-care educational provider as well as the

  17. Emerging wind energy technologies

    DEFF Research Database (Denmark)

    Rasmussen, Flemming; Grivel, Jean-Claude; Faber, Michael Havbro

    2014-01-01

    This chapter will discuss emerging technologies that are expected to continue the development of the wind sector to embrace new markets and to become even more competitive.......This chapter will discuss emerging technologies that are expected to continue the development of the wind sector to embrace new markets and to become even more competitive....

  18. Providing Continuous Assurance

    NARCIS (Netherlands)

    Kocken, Jonne; Hulstijn, Joris

    2017-01-01

    It has been claimed that continuous assurance can be attained by combining continuous monitoring by management, with continuous auditing of data streams and the effectiveness of internal controls by an external auditor. However, we find that in existing literature the final step to continuous

  19. Usability, Quality, Value and E-Learning Continuance Decisions

    Science.gov (United States)

    Chiu, Chao-Min; Hsu, Meng-Hsiang; Sun, Szu-Yuan; Lin, Tung-Ching; Sun, Pei-Chen

    2005-01-01

    Previous research suggests that an eventual information technology (IT) success depend on both its initial adoption (acceptance) and subsequent continued usage (continuance). Expectancy disconfirmation theory (EDT) has been successfully used to predict users' intention to continue using information technologies. This study proposed a decomposed…

  20. Asymptomatic intracranial arterial stenosis and metabolic syndrome: the APAC study.

    Directory of Open Access Journals (Sweden)

    Anxin Wang

    Full Text Available PURPOSE: The metabolic syndrome (MetS is a major risk factor for cardiovascular diseases. We investigated potential associations between MetS and asymptomatic intracranial arterial stenosis (ICAS in a general population. METHODS: The community-based "Asymptomatic Polyvascular Abnormalities in Community Study" examined asymptomatic polyvascular abnormalities in a Chinese population aged 40+ years without history of stroke and coronary heart disease. MetS was defined by the International Diabetes Federation criteria. Asymptomatic ICAS was diagnosed by transcranial color-coded Doppler sonography. RESULTS: Out of 5393 study participants, asymptomatic ICAS was detected in 713 (13.2% participants, and MetS in 1323 (24.5% individuals. Prevalence of asymptomatic ICAS increased significantly from 7.5% to 24.2% with increasing number of MetS components. After adjusting for age, gender, physical activity, body mass index, low-density lipoprotein cholesterol and high-sensitivity C-reactive protein, MetS was significantly associated with asymptomatic ICAS (OR: 1.50; 95%CI: 1.23,1.83. Compared with the subgroup without MetS, the ORs for asymptomatic ICAS increased (P<0.0001 for each of 5 components of MetS from 1.71 (95%CI: 1.27,2.30, to 2.20 (95%CI: 1.63,2.98, 2.79 (95CI: 2.01,3.88, 3.08 (95%CI: 2.11,4.51 and 4.27 (95%CI: 2.22,8.20. CONCLUSIONS: In multivariate analysis, MetS was an independent and additional factor associated with asymptomatic ICAS. Study participants with 5 MetS components had a 4 times higher risk of asymptomatic ICAS than participants with no MetS component.

  1. Asymptomatic intracranial arterial stenosis and metabolic syndrome: the APAC study.

    Science.gov (United States)

    Wang, Anxin; Li, Zhaoxia; Luo, Yanxia; Liu, Xiaoxue; Guo, Xiuhua; Wu, Shouling; Zhao, Xingquan; Jonas, Jost B

    2014-01-01

    The metabolic syndrome (MetS) is a major risk factor for cardiovascular diseases. We investigated potential associations between MetS and asymptomatic intracranial arterial stenosis (ICAS) in a general population. The community-based "Asymptomatic Polyvascular Abnormalities in Community Study" examined asymptomatic polyvascular abnormalities in a Chinese population aged 40+ years without history of stroke and coronary heart disease. MetS was defined by the International Diabetes Federation criteria. Asymptomatic ICAS was diagnosed by transcranial color-coded Doppler sonography. Out of 5393 study participants, asymptomatic ICAS was detected in 713 (13.2%) participants, and MetS in 1323 (24.5%) individuals. Prevalence of asymptomatic ICAS increased significantly from 7.5% to 24.2% with increasing number of MetS components. After adjusting for age, gender, physical activity, body mass index, low-density lipoprotein cholesterol and high-sensitivity C-reactive protein, MetS was significantly associated with asymptomatic ICAS (OR: 1.50; 95%CI: 1.23,1.83). Compared with the subgroup without MetS, the ORs for asymptomatic ICAS increased (P<0.0001) for each of 5 components of MetS from 1.71 (95%CI: 1.27,2.30), to 2.20 (95%CI: 1.63,2.98), 2.79 (95CI: 2.01,3.88), 3.08 (95%CI: 2.11,4.51) and 4.27 (95%CI: 2.22,8.20). In multivariate analysis, MetS was an independent and additional factor associated with asymptomatic ICAS. Study participants with 5 MetS components had a 4 times higher risk of asymptomatic ICAS than participants with no MetS component.

  2. Soil washing technology evaluation

    International Nuclear Information System (INIS)

    Suer, A.

    1995-04-01

    Environmental Restoration Engineering (ERE) continues to review innovative, efficient, and cost effective technologies for SRS soil and/or groundwater remediation. As part of this effort, this technical evaluation provides review and the latest information on the technology for SRS soil remediation. Additional technology evaluation reports will be issued periodically to update these reports. The purpose of this report is to review the soil washing technology and its potential application to SRS soil remediation. To assess whether the Soil Washing technology is a viable option for SRS soil remediation, it is necessary to review the technology/process, technology advantages/limitations, performance, applications, and cost analysis

  3. Organocatalysis in continuous flow

    NARCIS (Netherlands)

    Berg, van den S.A.

    2016-01-01

    Continuous flow chemistry is an enabling technique in organic chemistry. Advantages include extremely fast mixing and heat transfer capabilities as well as rapid screening of reaction conditions. Combining continuous flow chemistry with solid-supported organocatalysis presents challenges that have

  4. LANL continuity of operations plan

    Energy Technology Data Exchange (ETDEWEB)

    Senutovitch, Diane M [Los Alamos National Laboratory

    2010-12-22

    The Los Alamos National Laboratory (LANL) is a premier national security research institution, delivering scientific and engineering solutions for the nation's most crucial and complex problems. Our primary responsibility is to ensure the safety, security, and reliability of the nation's nuclear stockpile. LANL emphasizes worker safety, effective operational safeguards and security, and environmental stewardship, outstanding science remains the foundation of work at the Laboratory. In addition to supporting the Laboratory's core national security mission, our work advances bioscience, chemistry, computer science, earth and environmental sciences, materials science, and physics disciplines. To accomplish LANL's mission, we must ensure that the Laboratory EFs continue to be performed during a continuity event, including localized acts of nature, accidents, technological or attack-related emergencies, and pandemic or epidemic events. The LANL Continuity of Operations (COOP) Plan documents the overall LANL COOP Program and provides the operational framework to implement continuity policies, requirements, and responsibilities at LANL, as required by DOE 0 150.1, Continuity Programs, May 2008. LANL must maintain its ability to perform the nation's PMEFs, which are: (1) maintain the safety and security of nuclear materials in the DOE Complex at fixed sites and in transit; (2) respond to a nuclear incident, both domestically and internationally, caused by terrorist activity, natural disaster, or accident, including mobilizing the resources to support these efforts; and (3) support the nation's energy infrastructure. This plan supports Continuity of Operations for Los Alamos National Laboratory (LANL). This plan issues LANL policy as directed by the DOE 0 150.1, Continuity Programs, and provides direction for the orderly continuation of LANL EFs for 30 days of closure or 60 days for a pandemic/epidemic event. Initiation of COOP operations may

  5. Discretization of continuous frame

    Indian Academy of Sciences (India)

    Home; Journals; Proceedings – Mathematical Sciences; Volume 122; Issue 2 ... In this paper we consider the notion of continuous frame of subspaces and define a new concept of continuous frame, entitled continuous atomic resolution of identity, for arbitrary Hilbert space H which has a countable reconstruction formula.

  6. Australian coal industry continues expansion

    International Nuclear Information System (INIS)

    Edwards, G.E.

    1991-01-01

    Recent saleable Australian black coal production figures are given along with trends in development of new operations and new technology aiming to provide a sound basis for the continuing expansion of the Australian coal industry. Export prices from 1982 to 1991 to Japan (Australia's major export market) are provided, together with Australian dollar return to exporters at the exchange rate prevailing at the start of each contract year. An increased demand for steaming coal is expected, thus maintaining Australia's position as the world's larger exporter. 4 tabs

  7. FACTORS INFLUENCING CONTINUOUS ORGANISATIONAL CHANGE

    Directory of Open Access Journals (Sweden)

    Alexandru Rizescu

    2016-10-01

    Full Text Available Change involves the continuous adjustment to the external conditions of organizations in the operating environment, in parallel with the growth of domestic stability. This process constitutes the dilemma of change-stability, which can be tackled only through a vision of the future, meaning the idorganization of organization-environment interaction along with a flexible organizational structure, the use of advanced technology and the existence of a system of rewarding employees that reflects the values and priorities of both, organizational norms and individual needs.

  8. Avionics systems integration technology

    Science.gov (United States)

    Stech, George; Williams, James R.

    1988-01-01

    A very dramatic and continuing explosion in digital electronics technology has been taking place in the last decade. The prudent and timely application of this technology will provide Army aviation the capability to prevail against a numerically superior enemy threat. The Army and NASA have exploited this technology explosion in the development and application of avionics systems integration technology for new and future aviation systems. A few selected Army avionics integration technology base efforts are discussed. Also discussed is the Avionics Integration Research Laboratory (AIRLAB) that NASA has established at Langley for research into the integration and validation of avionics systems, and evaluation of advanced technology in a total systems context.

  9. What impact do anxiety, depression, perceived control and technology capability have on whether patients with chronic heart failure take-up or continue to use home tele-monitoring services? Study design of ADaPT-HF.

    Science.gov (United States)

    Crundall-Goode, Amanda; Goode, Kevin M; Clark, Andrew L

    2017-04-01

    Home tele-monitoring (HTM) is used to monitor the clinical signs and symptoms of patients with chronic heart failure (CHF) in order to reduce unplanned hospital admissions. However, not all patients who are referred will agree to use HTM, and some patients choose to withdraw early from its use. ADaPT-HF will investigate whether depression, anxiety, low perceived control, reduced technology capability, level of education, age or the severity or complexity of a patient's illness can predict refusal of, or early withdrawal from, HTM in patients with CHF. The study will recruit 288 patients who have been recently admitted to hospital with heart failure who have been referred for HTM. At the time of referral, patients will complete depression (nine-item Patient Health Questionnaire), anxiety (seven-item Generalised Anxiety Disorder questionnaire), perceived control (eight-item revised Controlled Attitudes Scale) and technology capability (ten-item Technology Readiness Index 2.0) screening questionnaires. In addition, data on demographics, diagnosis, clinical examination, socio-economic status, history of comorbidities, medication, biochemistry and haematology will be recorded. The primary outcome will be a composite of refusal of or early withdrawal from HTM. The principle analysis will be made using logistic regression. By establishing which factors influence a patient's decision to refuse or withdraw early from HTM, it may be possible to redesign HTM referral processes. It may be that patients with CHF who also have depression, anxiety, low control and poor technology skills should not be referred until they receive appropriate support or that they should be managed differently when they do receive HTM. The results of ADAPT-HF may provide a way of making more efficient and cost-effective use of HTM services.

  10. Molecular biomethods handbook

    National Research Council Canada - National Science Library

    Walker, John M; Rapley, Ralph

    2008-01-01

    ... the reader to a selection of analytical and preparative techniques that we considered to be frequently used by research workers in the field of molecular biology. Clearly, within the constraints of a single volume we had to be selective in the techniques we described. Since the first edition was published, science has continued to move on apace. For example, the use of microarray technology is now commonplace, nanotechnology has entered the scientific literature, microfluidic technology has be...

  11. Discretization of continuous frame

    Indian Academy of Sciences (India)

    other known continuous frames. Finally, we state and prove the assertions of the stability of perturbation in this concept. Keywords. Bounded operator; Hilbert space; continuous frame; atomic resolution of identity. 1. Introduction and preliminaries. As we know frames are more flexible tools to convey information than bases, ...

  12. Archives: Continuing Medical Education

    African Journals Online (AJOL)

    Items 1 - 50 of 88 ... Archives: Continuing Medical Education. Journal Home > Archives: Continuing Medical Education. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register · Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives. 1 - 50 of 88 ...

  13. Archives: Continuing Medical Education

    African Journals Online (AJOL)

    Items 51 - 88 of 88 ... Archives: Continuing Medical Education. Journal Home > Archives: Continuing Medical Education. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register · Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives. 51 - 88 of 88 ...

  14. Cutting Out Continuations

    DEFF Research Database (Denmark)

    Bahr, Patrick; Hutton, Graham

    2016-01-01

    In the field of program transformation, one often transforms programs into continuation-passing style to make their flow of control explicit, and then immediately removes the resulting continuations using defunctionalisation to make the programs first-order. In this article, we show how these two...

  15. Reinventing Continuing Higher Education

    Science.gov (United States)

    Walshok, Mary Lindenstein

    2012-01-01

    Re-inventing continuing higher education is about finding ways to be a more central player in a region's civic, cultural, and economic life as well as in the education of individuals for work and citizenship. Continuing higher education will require data gathering, analytical tools, convening authority, interpretive skills, new models of delivery,…

  16. Broadband Electromagnetic Technology

    Science.gov (United States)

    2011-06-23

    The objectives of this project are to continue the enhancements to the combined Broadband Electromagnetic and Full Encirclement Unit (BEM-FEU) technologies and to evaluate the systems capability in the laboratory and the field. The BEM instrument ...

  17. Continuous leaching of ores

    International Nuclear Information System (INIS)

    Hasegawa, S.; Yamashita, T.; Kameda, M.

    1980-01-01

    A process is described which comprises sprinkling continuously and uniformly a solvent selected from an acid, an alkali and an organic solvent on the surface of each of a plurality of multi-staged, moving continuous unit layers formed of pulverized uranium ore fed in a predetermined amount from a multi-staged, metering, continuous feed apparatus. Layers composed of a uniform mixture of the pulverized ore and solvent are thermally cured and then subjected to repulping and solid-liquid separation to recover a pregnant liquor containing the extracted metal component

  18. Continuously Connected With Mobile IP

    Science.gov (United States)

    2002-01-01

    Cisco Systems developed Cisco Mobile Networks, making IP devices mobile. With this innovation, a Cisco router and its connected IP devices can roam across network boundaries and connection types. Because a mobile user is able to keep the same IP address while roaming, a live IP connection can be maintained without interruption. Glenn Research Center jointly tested the technology with Cisco, and is working to use it on low-earth-orbiting research craft. With Cisco's Mobile Networks functionality now available in Cisco IOS Software release 12.2(4)T, the commercial advantages and benefits are numerous. The technology can be applied to public safety, military/homeland security, emergency management services, railroad and shipping systems, and the automotive industry. It will allow ambulances, police, firemen, and the U.S. Coast Guard to stay connected to their networks while on the move. In the wireless battlefield, the technology will provide rapid infrastructure deployment for U.S. national defense. Airline, train, and cruise passengers utilizing Cisco Mobile Networks can fly all around the world with a continuous Internet connection. Cisco IOS(R) Software is a registered trademark of Cisco Systems.

  19. Topological Photonics for Continuous Media

    Science.gov (United States)

    Silveirinha, Mario

    Photonic crystals have revolutionized light-based technologies during the last three decades. Notably, it was recently discovered that the light propagation in photonic crystals may depend on some topological characteristics determined by the manner how the light states are mutually entangled. The usual topological classification of photonic crystals explores the fact that these structures are periodic. The periodicity is essential to ensure that the underlying wave vector space is a closed surface with no boundary. In this talk, we prove that it is possible calculate Chern invariants for a wide class of continuous bianisotropic electromagnetic media with no intrinsic periodicity. The nontrivial topology of the relevant continuous materials is linked with the emergence of edge states. Moreover, we will demonstrate that continuous photonic media with the time-reversal symmetry can be topologically characterized by a Z2 integer. This novel classification extends for the first time the theory of electronic topological insulators to a wide range of photonic platforms, and is expected to have an impact in the design of novel photonic systems that enable a topologically protected transport of optical energy. This work is supported in part by Fundacao para a Ciencia e a Tecnologia Grant Number PTDC/EEI-TEL/4543/2014.

  20. Discretization of continuous frame

    Indian Academy of Sciences (India)

    Author Affiliations. A Fattahi1 H Javanshiri2. Department of Mathematics, Razi University, Kermanshah, Iran; Department of Mathematical Sciences, Isfahan University of Technology, Isfahan 84156-83111, Iran ...

  1. Continuing Medical Education

    African Journals Online (AJOL)

    Continuing Medical Education. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 25, No 9 (2007) >. Log in or Register to get access to full text downloads.

  2. Trieste will continue

    International Nuclear Information System (INIS)

    1968-01-01

    Trieste will continue to be the home of the International Centre for Theoretical Physics for the foreseeable future. An agreement signed in Vienna during December between the Italian Government and the Agency brought this assurance. (author)

  3. Continuing Medical Education

    African Journals Online (AJOL)

    Continuing Medical Education. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 21, No 5 (2003) >. Log in or Register to get access to full text downloads.

  4. Branching trajectory continual integral

    International Nuclear Information System (INIS)

    Maslov, V.P.; Chebotarev, A.M.

    1980-01-01

    Heuristic definition of the Feynman continual integral over branching trajectories is suggested which makes it possible to obtain in the closed form the solution of the Cauchy problem for the model Hartree equation. A number of properties of the solution is derived from an integral representation. In particular, the quasiclassical asymptotics, exact solution in the gaussian case and perturbation theory series are described. The existence theorem for the simpliest continual integral over branching trajectories is proved [ru

  5. Rehabilitation Technology Review.

    Science.gov (United States)

    Hatherleigh Co., Ltd., New York, NY.

    Designed as a special continuing education program for rehabilitation professionals, this document is divided into five lessons. Lesson 1, "Technology Assessment: Determining the Needs" (Ricardo G. Cerna), includes discussion on technology assessment and determining the needs of the clients as well as different types of assistive…

  6. Information technology ethics

    DEFF Research Database (Denmark)

    Hongladarom, Soraj; Ess, Charles

    This book was the first publication to take a genuinely global approach to the diverse ethical issues evoked by Information and Communication Technologies and their possible resolutions. Readers will gain a greater appreciation for the problems and possibilities of genuinely global information...... ethics, which are urgently needed as information and communication technologies continue their exponential growth...

  7. The Continuity Project, Fall 1997 Report.

    Science.gov (United States)

    Wasilko, Peter J.

    The Continuity Project is a research, development, and technology transfer initiative aimed at creating a "Library of the Future" by combining features of an online public access catalog (OPAC) and a campus wide information system (CWIS) with advanced facilities drawn from such areas as artificial intelligence (AI), knowledge…

  8. Continuous professional development of educators: the state ...

    African Journals Online (AJOL)

    Continuous Professional Development (CPD) for educators should form an integral part of an education system. CPD should include diverse programmes that are reflective and that promote and embrace technological development. Such programmes would make it possible to respond to challenges brought about by ...

  9. Emerging technologies

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Shin-yee

    1993-03-01

    The mission of the Emerging Technologies thrust area at Lawrence Livermore National Laboratory is to help individuals establish technology areas that have national and commercial impact, and are outside the scope of the existing thrust areas. We continue to encourage innovative ideas that bring quality results to existing programs. We also take as our mission the encouragement of investment in new technology areas that are important to the economic competitiveness of this nation. In fiscal year 1992, we have focused on nine projects, summarized in this report: (1) Tire, Accident, Handling, and Roadway Safety; (2) EXTRANSYT: An Expert System for Advanced Traffic Management; (3) Odin: A High-Power, Underwater, Acoustic Transmitter for Surveillance Applications; (4) Passive Seismic Reservoir Monitoring: Signal Processing Innovations; (5) Paste Extrudable Explosive Aft Charge for Multi-Stage Munitions; (6) A Continuum Model for Reinforced Concrete at High Pressures and Strain Rates: Interim Report; (7) Benchmarking of the Criticality Evaluation Code COG; (8) Fast Algorithm for Large-Scale Consensus DNA Sequence Assembly; and (9) Using Electrical Heating to Enhance the Extraction of Volatile Organic Compounds from Soil.

  10. Continuous Adductor Canal Blocks

    DEFF Research Database (Denmark)

    Monahan, Amanda M; Sztain, Jacklynn F; Khatibi, Bahareh

    2016-01-01

    BACKGROUND: It remains unknown whether continuous or scheduled intermittent bolus local anesthetic administration is preferable for adductor canal perineural catheters. Therefore, we tested the hypothesis that scheduled bolus administration is superior or noninferior to a continuous infusion...... on cutaneous knee sensation in volunteers. METHODS: Bilateral adductor canal catheters were inserted in 24 volunteers followed by ropivacaine 0.2% administration for 8 hours. One limb of each subject was assigned randomly to a continuous infusion (8 mL/h) or automated hourly boluses (8 m...... tolerance of electrical current and quadriceps femoris maximum voluntary isometric contraction strength at baseline, hourly for 14 hours, and again after 22 hours. RESULTS: The 2 administration techniques provided equivalent cutaneous analgesia at 8 hours because noninferiority was found in both directions...

  11. Continuous venovenous haemodialysis

    DEFF Research Database (Denmark)

    Jensen, Dorte Møller; Bistrup, C; Pedersen, R S

    1996-01-01

    A simple three-pump-based system for the performance of continuous venovenous haemodialysis is described. The method employs access to the circulation via a double-lumen catheter, and by means of a standard extracorporeal peristaltic pump the blood is circulated through a haemofiltration filter....... Standard solutions for peritoneal dialysis are administered in a single-pass manner countercurrent to the blood flow. To control the dialysate flow through the filter, two separate pumps designed for intravenous infusion are used. Anticoagulation is achieved by means of continuous heparin infusion...

  12. Introduction to Continuous Optimization

    DEFF Research Database (Denmark)

    Andreasson, Niclas; Evgrafov, Anton; Patriksson, Michael

    optimal solutions for continuous optimization models. The main part of the mathematical material therefore concerns the analysis and linear algebra that underlie the workings of convexity and duality, and necessary/sufficient local/global optimality conditions for continuous optimization problems. Natural...... algorithms are then developed from these optimality conditions, and their most important convergence characteristics are analyzed. The book answers many more questions of the form “Why?” and “Why not?” than “How?”. We use only elementary mathematics in the development of the book, yet are rigorous throughout...

  13. 2015 Workshop on Continuations

    DEFF Research Database (Denmark)

    his volume contains the papers presented at WoC 2015, the Workshop on Continuations held at ETAPS 2015. There were four submissions. Each of them was reviewed by, on the average, three PC members. The committee decided to accept three papers. The program also includes one invited talk. It also...... documents the depth, variety, and richness of continuations with four distilled tutorials. Thanks are due to the local organizers of ETAPS 2015 for the infras- tructure and to the general chairman of WoC 2015, Ugo de'Liguoro, for initiating this workshop and making it happen...

  14. Chinese ethnic meat products: Continuity and development.

    Science.gov (United States)

    Zeng, Weicai; Wen, Wenting; Deng, Yue; Tian, Yuanyuan; Sun, Honghu; Sun, Qun

    2016-10-01

    With their distinctive sensory characterizations and unique processing technologies, Chinese ethnic meat products possess great potential for development and continuity in modern China's meat industry. Due to the greater demand for meat products and higher quality and safety concerns in economically fast growing China, the development and continuity of ethnic meat products face its own unique challenges. In this review, the classification of typical ethnic products and their characteristics, and the research progress on their quality and processing technologies are discussed. The application of innovative and green technologies to improve the safety and quality of ethnic meat products for greater industrialization and sustainable development is highlighted. Furthermore, the strategy for promoting the production of Chinese ethnic meat products during the next five years is presented. Copyright © 2016 Elsevier Ltd. All rights reserved.

  15. Coping with Continual Motion

    Science.gov (United States)

    Gutsche, Betha

    2010-01-01

    In the face of seismic shifts in technology and social organization, librarians and library staff face changing roles. A focus on competencies--the skills, knowledge, behaviors, and attitudes that are involved in a job--can help the library profession keep its footing as well as help librarians stick to values. When well done, they can define a…

  16. Continuing Education by Correspondence

    Science.gov (United States)

    Gussow, Milton

    1974-01-01

    By means of portable laboratory modules and instructional materials, it is possible to construct a home study program in most technologies, as a technical institute and a proprietary school have done, creating a career path by which students can earn an Associate Degree in Electronics, mainly through correspondence study. (AJ)

  17. Continuous Personal Improvement.

    Science.gov (United States)

    Emiliani, M. L.

    1998-01-01

    Suggests that continuous improvement tools used in the workplace can be applied to self-improvement. Explains the use of such techniques as one-piece flow, kanban, visual controls, and total productive maintenance. Points out misapplications of these tools and describes the use of fishbone diagrams to diagnose problems. (SK)

  18. Continuous Reinforced Concrete Beams

    DEFF Research Database (Denmark)

    Hoang, Cao Linh; Nielsen, Mogens Peter

    1996-01-01

    This report deals with stress and stiffness estimates of continuous reinforced concrete beams with different stiffnesses for negative and positive moments e.g. corresponding to different reinforcement areas in top and bottom. Such conditions are often met in practice.The moment distribution...

  19. Continuing the Eclectic Journey.

    Science.gov (United States)

    Nance, Don W.; Myers, Pennie

    1991-01-01

    Continues recent debate on the current state of theory and the proper role of eclectic approaches. Presents brief overview of Adaptive Counseling and Therapy/Readiness model as systematic form of eclecticism. Makes argument for matching counseling approach to nature of problem and readiness of the client rather than maintaining a single…

  20. Continuing Medical Education

    African Journals Online (AJOL)

    A review article willintroduce readers to the educational subject matter, along with one-page summarises (in print) of additional articles that may be accessed in full online. We will continue to offer topical and up-to-date CME material. Readers are encouraged to register with samj.org.za to receive future notifications of new ...

  1. Laser Technology.

    Science.gov (United States)

    Gauger, Robert

    1993-01-01

    Describes lasers and indicates that learning about laser technology and creating laser technology activities are among the teacher enhancement processes needed to strengthen technology education. (JOW)

  2. Technology Empowerment: Security Challenges.

    Energy Technology Data Exchange (ETDEWEB)

    Warren, Drake Edward [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Backus, George A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Jones, Wendell [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Nelson, Thomas R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Skocypec, Russell D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-03-01

    Technology empowerment” means that innovation is increasingly accessible to ordinary people of limited means. As powerful technologies become more affordable and accessible, and as people are increasingly connected around the world, ordinary people are empowered to participate in the process of innovation and share the fruits of collaborative innovation. This annotated briefing describes technology empowerment and focuses on how empowerment may create challenges to U.S. national security. U.S. defense research as a share of global innovation has dwindled in recent years. With technology empowerment, the role of U.S. defense research is likely to shrink even further while technology empowerment will continue to increase the speed of innovation. To avoid falling too far behind potential technology threats to U.S. national security, U.S. national security institutions will need to adopt many of the tools of technology empowerment.

  3. Introduction to Continuous Optimization

    DEFF Research Database (Denmark)

    Andreasson, Niclas; Evgrafov, Anton; Patriksson, Michael

    Optimization, or mathematical programming, is a fundamental subject within decision science and operations research, in which mathematical decision models are constructed, analyzed, and solved. The book’s focus lies on providing a basis for the analysis of optimization models and of candidate...... optimal solutions for continuous optimization models. The main part of the mathematical material therefore concerns the analysis and linear algebra that underlie the workings of convexity and duality, and necessary/sufficient local/global optimality conditions for continuous optimization problems. Natural...... algorithms are then developed from these optimality conditions, and their most important convergence characteristics are analyzed. The book answers many more questions of the form “Why?” and “Why not?” than “How?”. We use only elementary mathematics in the development of the book, yet are rigorous throughout...

  4. Continuous Culture Microbioreactors

    DEFF Research Database (Denmark)

    Schäpper, Daniel

    : The working volumes are relatively small, typically continuous cultivations. Additionally, their small size oers a number of possibilities: Under the presence of good mixing, one can assume the contents of a microbioreactor....... The advance of miniature online measuring techniques makes it possible to measure at least the basic culture variables such as dissolved oxygen (DO), cell density (OD) and pH continuously and without disturbing the cultivation. Online measurements are at this scale very susceptible to the presence of bubbles...... chaotically into the reactor chamber again. Thus, over time, all of the reactor oor will be covered which prevents the formation of dead zones. Temperature is controlled by means of an external (and thus re-usable) heating plate which contains both a temperature sensor and a resistance heating wire...

  5. Continuing Education in Dentistry

    OpenAIRE

    Castillo, Catalina

    2014-01-01

    Nowadays it is not enough to hold a degree title allowing us to exercise a profession. We all know—indeed, it is obvious—that the socioeconomic environment we operate in has evolved rapidly and dramatically. Greater competition in the job market and training needs that are increasingly more specific and dynamic are driving the demand for specialized learning and are making concepts such as continuing education or lifelong training more important. A health professional must have a calling for ...

  6. Continuous software delivery

    OpenAIRE

    Krmavnar, Nina

    2015-01-01

    The main purpose of the thesis is the demonstration of one of the best possible approaches to an automated continuous delivery process as it relates to certain application types. In the introductory part, the main reason for choosing the subject is presented, along with a few examples of why nowadays - in order to keep pace with the competition - such an approach seems necessary. Following chapters discuss the basics of software delivery, starting with configuration and version control manage...

  7. Safety Campaign Continues

    CERN Multimedia

    2002-01-01

    If you see this poster, stop and read it! This is the third poster produced by TIS Division as part of its information campaign on health and safety in the workplace. It provides statistics on occupational accidents at CERN. You will see that, as in the rest of Europe, falls, slips and trips continue to be the main cause of accident. So, eyes open and take care! For more information : http://safety.cern.ch/

  8. Continuity and consensus

    DEFF Research Database (Denmark)

    Abrahamson, Peter

    2010-01-01

    In Danish family policy, changes initiated by the present conservative-liberal government differ little from those proposed by the opposition. Recent changes are minor, but significant ones occurred in the 1960s, when childcare was universalized, and in the 1980s, when parental leave substituted...... policy reflect changing conditions for employment and the minding of children and that there has been a high degree of continuity and consensus about the change, as indicated by the strong increase in female labour market involvement....

  9. Knowledge and Continuous Innovation

    DEFF Research Database (Denmark)

    Boer, Harry; Caffyn, S.; Corso, M.

    1999-01-01

    Competition today is forcing companies to increase their effectiveness through exploiting synergy and learning in product innovation. Literature, however, is still mainly focused on how product development projects, seen largely as isolated efforts, should be organised and managed. This article p...... is based on collaborative research by the authors, based on their involvement in the Euro-Australian co-operation project CIMA (Euro-Australian co-operation centre for Continuous Improvement and innovation MAnagement)....

  10. Continuous Fiber Ceramic Composites

    Energy Technology Data Exchange (ETDEWEB)

    Fareed, Ali [Honeywell Advanced Composites Inc. (HACI), Newark, DE (United States); Craig, Phillip A. [Honeywell Advanced Composites Inc. (HACI), Newark, DE (United States)

    2002-09-01

    Fiber-reinforced ceramic composites demonstrate the high-temperature stability of ceramics--with an increased fracture toughness resulting from the fiber reinforcement of the composite. The material optimization performed under the continuous fiber ceramic composites (CFCC) included a series of systematic optimizations. The overall goals were to define the processing window, to increase the robustinous of the process, to increase process yield while reducing costs, and to define the complexity of parts that could be fabricated.

  11. Future Information Technology

    CERN Document Server

    Stojmenovic, Ivan; Choi, Min; Xhafa, Fatos; FutureTech 2013

    2014-01-01

    Future technology information technology stands for all of continuously evolving and converging information technologies, including digital convergence, multimedia convergence, intelligent applications, embedded systems, mobile and wireless communications, bio-inspired computing, grid and cloud computing, semantic web, user experience and HCI, security and trust computing and so on, for satisfying our ever-changing needs. In past twenty five years or so, Information Technology (IT) influenced and changed every aspect of our lives and our cultures. These proceedings foster the dissemination of state-of-the-art research in all future IT areas, including their models, services, and novel applications associated with their utilization.

  12. Robust continuous clustering.

    Science.gov (United States)

    Shah, Sohil Atul; Koltun, Vladlen

    2017-09-12

    Clustering is a fundamental procedure in the analysis of scientific data. It is used ubiquitously across the sciences. Despite decades of research, existing clustering algorithms have limited effectiveness in high dimensions and often require tuning parameters for different domains and datasets. We present a clustering algorithm that achieves high accuracy across multiple domains and scales efficiently to high dimensions and large datasets. The presented algorithm optimizes a smooth continuous objective, which is based on robust statistics and allows heavily mixed clusters to be untangled. The continuous nature of the objective also allows clustering to be integrated as a module in end-to-end feature learning pipelines. We demonstrate this by extending the algorithm to perform joint clustering and dimensionality reduction by efficiently optimizing a continuous global objective. The presented approach is evaluated on large datasets of faces, hand-written digits, objects, newswire articles, sensor readings from the Space Shuttle, and protein expression levels. Our method achieves high accuracy across all datasets, outperforming the best prior algorithm by a factor of 3 in average rank.

  13. Continuity in Multi-Device Interaction

    DEFF Research Database (Denmark)

    Raptis, Dimitrios; Kjeldskov, Jesper; Skov, Mikael

    2016-01-01

    investigate and discuss the emerging multi-device interaction concept of “continuity”, which allow an activity to begin on one device and continue on another. We present a study of the challenges people have experienced in the use of a specific new product offering such functionality, namely Apple......’s Continuity. The study was done through surveying 3361 posts from technology web sites, discussion forums, and blogs, with a qualitative analysis of 1603 posts. Our findings present challenges in six themes of privacy, appropriation, customization, awareness, exclusion, and troubleshooting in relation...... to continuous interaction across devices. We further discuss the high-level implications of our findings through four design considerations for continuity in multi-device interaction....

  14. Modelling in Medical Technology Assessment

    NARCIS (Netherlands)

    B.C. Michel (Bowine)

    1996-01-01

    textabstractHealth care is a rapidly developing field in which new technologies are introduced continuously. Not all new technologies have the same impact however: most represent only small changes in existing technologies, whereas only a few - like organ transplants - really are revolutionary new

  15. Technology programme

    International Nuclear Information System (INIS)

    2007-01-01

    The technology activities carried out by the EURATOM-ENEA Association concern the continuation of the European Fusion Development Agreement (EFDA) as well as the ITER activities coordinated by the ITER International Office and Fusion for Energy. Also included in the activities are design and RD under the Broader Approach Agreement between the EU and Japan. In order to better contribute to the programme a number of consortium agreements among the Associations are being signed. Collaboration with industries in view of their participation in the construction of ITER was further strengthened, mainly in the field of magnet and divertor components. The new European Test Blanket Facility at ENEA Brasimone was completed; the design of the ITER radial neutron camera was optimised and the performance achievable with the in-vessel viewing system was further assessed by experimental trials. Design activities for the JT-60SA magnet and power supply system as well as the design and experimental activities related to the target of the International Fusion Materials Irradiation Facility were continued. Significant work was done to define quality assurance for neutronics analyses. Mockups of the ITER pre-compression ring made in glass fibre epoxy were tested. The activities and results documented in the following illustrate ENEA's efforts to support fusion development

  16. The Impact of Experience and Technology Change on Task-Technology Fit of a Collaborative Technology

    Science.gov (United States)

    Iversen, Jakob H.; Eierman, Michael A.

    2018-01-01

    This study continues a long running effort to examine collaborative writing and editing tools and the factors that impact Task-Technology Fit and Technology Acceptance. Previous studies found that MS Word/email performed better than technologies such as Twiki, Google Docs, and Office Live. The current study seeks to examine specifically the impact…

  17. Continuous Integration in CFMGR

    CERN Document Server

    Frohlingsdorf, David

    2017-01-01

    Cfmgr is a managing tool for network devices. At the moment there is no way to automatically check the working behaviour of the tool, meaning that a lot of effort is spend into manually testing the tool after an update. During my stay at CERN I developed a black-box testing framework for Cfmgr according to Continuous Integration practices and successfully deployed the framework using Jenkins and Docker. This report discusses in detail how the framework works and how it can be configured, and equally gives a broad problem description and outlines future work directions.

  18. CONTINUOUS GAS ANALYZER

    Science.gov (United States)

    Katz, S.; Weber, C.W.

    1960-02-16

    A reagent gas and a sample gas are chemically combined on a continuous basis in a reaction zone maintained at a selected temperature. The reagent gas and the sample gas are introduced to the reaction zone at preselected. constant molar rates of flow. The reagent gas and the selected gas in the sample mixture combine in the reaction zone to form a product gas having a different number of moles from the sum of the moles of the reactants. The difference in the total molar rates of flow into and out of the reaction zone is measured and indicated to determine the concentration of the selected gas.

  19. Continuous multivariate exponential extension

    International Nuclear Information System (INIS)

    Block, H.W.

    1975-01-01

    The Freund-Weinman multivariate exponential extension is generalized to the case of nonidentically distributed marginal distributions. A fatal shock model is given for the resulting distribution. Results in the bivariate case and the concept of constant multivariate hazard rate lead to a continuous distribution related to the multivariate exponential distribution (MVE) of Marshall and Olkin. This distribution is shown to be a special case of the extended Freund-Weinman distribution. A generalization of the bivariate model of Proschan and Sullo leads to a distribution which contains both the extended Freund-Weinman distribution and the MVE

  20. Continuous-infusion adriamycin

    International Nuclear Information System (INIS)

    Benjamin, R.S.; Chawla, S.P.; Ewer, M.S.; Hortobagyi, G.N.

    1986-01-01

    This chapter discusses the diminished cardiotoxicity as well as diminished nausea and vomiting with continuous infusions of adriamycin to patients undergoing radiation therapy, particularly with infusions of 48 hours or longer, and best with 96-hour infusions, the longest duration that has been studied systematically. In breast cancer, data show that more adriamycin is better, but only for a selected subgroup of patients: those with complete remission. The diminished cardiotoxicity makes the use of adriamycin more attractive in the adjuvant situation, where increased safety will decrease the chances of long-term complications and make retreatment easy for cured patients who develop second malignancies

  1. Continuous Shearlet Tight Frames

    KAUST Repository

    Grohs, Philipp

    2010-10-22

    Based on the shearlet transform we present a general construction of continuous tight frames for L2(ℝ2) from any sufficiently smooth function with anisotropic moments. This includes for example compactly supported systems, piecewise polynomial systems, or both. From our earlier results in Grohs (Technical report, KAUST, 2009) it follows that these systems enjoy the same desirable approximation properties for directional data as the previous bandlimited and very specific constructions due to Kutyniok and Labate (Trans. Am. Math. Soc. 361:2719-2754, 2009). We also show that the representation formulas we derive are in a sense optimal for the shearlet transform. © 2010 Springer Science+Business Media, LLC.

  2. Promising change, delivering continuity

    DEFF Research Database (Denmark)

    Lund, Jens Friis; Sungusia, Eliezeri; Mabele, Mathew Bukhi

    2017-01-01

    that compares the emergence of REDD+ in Tanzania with that of a previous forest-policy model called Participatory Forest Management. Our study describes how the advent of REDD+ implies change at the discursive level, but also continuity and repetitiveness in terms of the initial promises and expectations...... leading to substantial donor financing, pilot project activities, and policy development and implementation processes. In both epochs, these have achieved little in terms of changing actual forest management and use on the ground outside selected pilot project sites, but have sustained the livelihoods...

  3. Continuous glucose monitoring in dogs and cats.

    Science.gov (United States)

    Wiedmeyer, C E; DeClue, A E

    2008-01-01

    Use of continuous glucose monitoring in veterinary medicine is gaining popularity. Through use of a commercially available continuous glucose monitor system, insights into daily glucose changes in dogs and cats are achievable. The continuous glucose monitoring system measures glucose concentrations in the interstitial fluid of the subcutaneous space by use of a small, flexible probe. When placed in the subcutaneous tissue, the probe is connected to a recording device that is attached to the animal and records the interstitial fluid glucose concentration every 5 minutes (288 readings per 24 hours). Once attached and properly calibrated, the instrument can remain in place for several days, hospitalization of the patient is not necessary, and the normal daily routine of the animal can be maintained. The data from the recording device are then downloaded and a very detailed picture of the interstitial fluid glucose concentration over that time period can be obtained. Subcutaneous interstitial fluid glucose concentrations have a good correlation to blood glucose concentrations within a defined range. The continuous glucose monitoring system has distinct advantages over traditional blood glucose curves and is a valuable tool for managing diabetic dogs and cats. In addition, other clinical uses for continuous glucose monitoring are being developed. This review is designed to outline the technology behind the continuous glucose monitoring system, describe the clinical use of the instrument, provide clinical examples in which it may be useful, and discuss future directions for continuous glucose monitoring in dogs and cats.

  4. A continuous stream

    Energy Technology Data Exchange (ETDEWEB)

    Kersey, A.D.; Gysling, D.L.; Bostick, F.X. III

    1999-10-01

    Sensors designed for downhole monitoring applications in the oil and gas industry are subjected to some of the most hostile environments on earth. Consequently, reliability in the transducer technology is one of the main challenges to realizing the economic benefits associated with the permanent deployment of downhole monitoring sensor systems. Over the past decade, fiber-optic sensing technology has been used in a range of industrial and commercial applications. In efforts to extract the full benefits of fiber-sensing systems, these applications have tended to exploit the ability of fiber-optics to accurately measure large numbers of parameters in harsh conditions on a widely distributed basis, with the fiber serving as the measurement means and the telemetry channel. These and other attributes, make them particularly suited for applications within the oil and gas industry. Fiber bragg grating--a new kind of fiber-optic measuring device--has potential in downhole and reservoir monitoring to provide real-time, spatially distributed measurements of pressure, temperature and multiphase flow.

  5. Continuous integrated manufacturing of therapeutic proteins.

    Science.gov (United States)

    Karst, Daniel Johannes; Steinebach, Fabian; Morbidelli, Massimo

    2017-12-28

    With the growth of our understanding of biopharmaceutical processes, a transition from classical batch to continuous integrated manufacturing of therapeutic proteins is taking place across laboratory, clinical and commercial scales. Encouraged by regulatory authorities, this transition is favoured by new emerging technologies as well as by the development of better simulation models. The current status of continuous cell culture and downstream processes and requirements for their successful integration are discussed in this article, with specific reference to product quality attributes. Copyright © 2017. Published by Elsevier Ltd.

  6. Continuing galactic formation

    International Nuclear Information System (INIS)

    McCanney, J.M.

    1981-01-01

    A new theory for galactic arm formation shows the arms to be continually eminating from the galactic nucleus due to a continual influx of cosmic dust. In the neighborhood of the nucleus the problem is treated as a fluid flow and a simple solution is given using conservation of momentum. When rotational dynamics are included the spinning arm system is the result. This solution resolves the problem of the missing mass, accounts for warped disk galaxies and gives a probable source for the gravity waves measured by Weber which eminate from our galactic center. Reversal of arm direction is demonstrated and examples of such reversals are cited. An approximate theoretical estimate of the age of our Sun is found to be in good agreement with radio isotope dating. A general result shows why twin star systems are in such great abundance in a galaxy. It gives a model of galactic evolution which begins with only a single massive nucleus with the collapsing gas clouds forming the arms. (orig.)

  7. Australia: a continuing genocide?

    Science.gov (United States)

    Short, Damien

    2010-01-01

    Debates about genocide in Australia have for the most part focussed on past frontier killings and child removal practices. This article, however, focuses on contemporary culturally destructive policies, and the colonial structures that produce them, through the analytical lens of the concept of genocide. The article begins with a discussion of the meaning of cultural genocide, locating the idea firmly in Lemkin's work before moving on to engage with the debates around Lemkin's distinction between genocide and cultural 'diffusion.' In contrast to those scholars who prefer the word 'ethnocide,' the underlying conceptual contention is that the term 'cultural genocide' simply describes a key method of genocide and should be viewed, without the need for qualification, as genocide. While direct physical killing and genocidal child removal practices may have ceased in Australia, some indigenous activists persuasively contend that genocide is a continuing process in an Australia that has failed to decolonise. Concurring with these views the article argues that the contemporary expression of continuing genocidal relations in Australia can be seen principally, and perversely, in the colonial state's official reconciliation process, native title land rights regime and the recent interventionist 'solutions' to indigenous 'problems' in the Northern Territory.

  8. Continuously adjustable Pulfrich spectacles

    Science.gov (United States)

    Jacobs, Ken; Karpf, Ron

    2011-03-01

    A number of Pulfrich 3-D movies and TV shows have been produced, but the standard implementation has inherent drawbacks. The movie and TV industries have correctly concluded that the standard Pulfrich 3-D implementation is not a useful 3-D technique. Continuously Adjustable Pulfrich Spectacles (CAPS) is a new implementation of the Pulfrich effect that allows any scene containing movement in a standard 2-D movie, which are most scenes, to be optionally viewed in 3-D using inexpensive viewing specs. Recent scientific results in the fields of human perception, optoelectronics, video compression and video format conversion are translated into a new implementation of Pulfrich 3- D. CAPS uses these results to continuously adjust to the movie so that the viewing spectacles always conform to the optical density that optimizes the Pulfrich stereoscopic illusion. CAPS instantly provides 3-D immersion to any moving scene in any 2-D movie. Without the glasses, the movie will appear as a normal 2-D image. CAPS work on any viewing device, and with any distribution medium. CAPS is appropriate for viewing Internet streamed movies in 3-D.

  9. Landsat Data Continuity Mission

    Science.gov (United States)

    ,

    2012-01-01

    The Landsat Data Continuity Mission (LDCM) is a partnership formed between the National Aeronautics and Space Administration (NASA) and the U.S. Geological Survey (USGS) to place the next Landsat satellite in orbit in January 2013. The Landsat era that began in 1972 will become a nearly 41-year global land record with the successful launch and operation of the LDCM. The LDCM will continue the acquisition, archiving, and distribution of multispectral imagery affording global, synoptic, and repetitive coverage of the Earth's land surfaces at a scale where natural and human-induced changes can be detected, differentiated, characterized, and monitored over time. The mission objectives of the LDCM are to (1) collect and archive medium resolution (30-meter spatial resolution) multispectral image data affording seasonal coverage of the global landmasses for a period of no less than 5 years; (2) ensure that LDCM data are sufficiently consistent with data from the earlier Landsat missions in terms of acquisition geometry, calibration, coverage characteristics, spectral characteristics, output product quality, and data availability to permit studies of landcover and land-use change over time; and (3) distribute LDCM data products to the general public on a nondiscriminatory basis at no cost to the user.

  10. Continuous steel production and apparatus

    Science.gov (United States)

    Peaslee, Kent D [Rolla, MO; Peter, Jorg J [McMinnville, OR; Robertson, David G. C. [Rolla, MO; Thomas, Brian G [Champaign, IL; Zhang, Lifeng [Trondheim, NO

    2009-11-17

    A process for continuous refining of steel via multiple distinct reaction vessels for melting, oxidation, reduction, and refining for delivery of steel continuously to, for example, a tundish of a continuous caster system, and associated apparatus.

  11. Synthesis of nanomaterials by continuous-flow microfluidics: A review

    CSIR Research Space (South Africa)

    Makgwane, PR

    2014-02-01

    Full Text Available -purpose batch reactor is masked with complications, on the other hand, the interface of nanomaterials synthesis processes and continuous-flow microfluidic chemistry has demonstrated relatively superior process performance over conventional technologies...

  12. Intelligent control system for continuous technological process of alkylation

    Science.gov (United States)

    Gebel, E. S.; Hakimov, R. A.

    2018-01-01

    Relevance of intelligent control for complex dynamic objects and processes are shown in this paper. The model of a virtual analyzer based on a neural network is proposed. Comparative analysis of mathematical models implemented in MathLab software showed that the most effective from the point of view of the reproducibility of the result is the model with seven neurons in the hidden layer, the training of which was performed using the method of scaled coupled gradients. Comparison of the data from the laboratory analysis and the theoretical model are showed that the root-mean-square error does not exceed 3.5, and the calculated value of the correlation coefficient corresponds to a "strong" connection between the values.

  13. Continuous radioisotope infusion

    International Nuclear Information System (INIS)

    Soederborg, B.; Asaba, H.; Gunnarsson, B.; Jekell, K.; Kiibus, A.; Sandqvist, S.

    1978-01-01

    Continuous infusion of a radioactive marker was used instead of a conventional bolus injection to improve haemodynamic studies. Tc-99m was infused into the blood circulation at a constant rate for 100-300 seconds and the activity in the target structure was measured by a gamma camera with a computer system or by a single detector. The concentration of the marker increased linearly at the same rate throughout the circulating system. Due to variations in transport time from infusion site to different parts of the system the rise of activity occurred at different times. A theory for the calculations was presented and consequently confirmed in a model study. Blood flow patterns in artificial kidneys and alterations in renal blood flow induced by angiotensin were studied. The results are presented as time-function curves or as computer images. This technique can be used to evaluate distributions and alterations of flow in separate parts of a complex circulating system. (author)

  14. Continuous damage mechanics

    International Nuclear Information System (INIS)

    Chaboche, J.L.

    1981-01-01

    The classical structural life predictions are based on stabilized stress-strain analysis and some parametric relations with the number of cycles to failure. During the last ten years a different approach, initiated by the works of Kachanov and Rabotnov for creep rupture, has been developed by different laboratories. This continuous Damage Mechanics, treating the damaged material as a macroscopically homogeneous one, leads to the possibility of globally modelling the nucleation and the propagation of microdefects including their effect on the stress-strain behaviour. This paper presents the general theory and several applications to a turbine blade refractory alloy. It includes the description of sequence effects and creep-fatigue interaction. The generalization for three-dimensional conditions, where anisotropic damage effects are possible, is discussed and some new proposals are given for the determination of simple anisotropic damage equations. (orig.)

  15. Spaces of continuous functions

    CERN Document Server

    Groenewegen, G L M

    2016-01-01

    The space C(X) of all continuous functions on a compact space X carries the structure of a normed vector space, an algebra and a lattice. On the one hand we study the relations between these structures and the topology of X, on the other hand we discuss a number of classical results according to which an algebra or a vector lattice can be represented as a C(X). Various applications of these theorems are given. Some attention is devoted to related theorems, e.g. the Stone Theorem for Boolean algebras and the Riesz Representation Theorem. The book is functional analytic in character. It does not presuppose much knowledge of functional analysis; it contains introductions into subjects such as the weak topology, vector lattices and (some) integration theory.

  16. Continuous Platform Development

    DEFF Research Database (Denmark)

    Nielsen, Ole Fiil

    evolution does not make the platforms irrelevant. This research is based on case studies and applications in the two Danish companies, LEGO and Grundfos, where several platform development projects have been followed. LEGO is exceptional for their long experience with platform development and maintenance......, while Grundfos is relatively new within this area. This study puts emphasis on platform projects and defines such projects as something very different from product development projects and more similar to industrial research projects, due to the fact that they are continuous activities with relatively...... low risks and investments but also with relatively fuzzy results. When looking for new platform projects, it is important to make sure that the company and market is ready for the introduction of platforms, and to make sure that people from marketing and sales, product development, and downstream...

  17. Continuity and change

    DEFF Research Database (Denmark)

    Birch-Thomsen, Torben; Reenberg, Anette; Mertz, Ole

    2010-01-01

    Traditional agricultural land use systems in the humid tropics of the Southwest Pacific are, as elsewhere, affected by globalization processes. This paper analyzes the directions of change in the land use system of Bellona, a small outer island in the Solomon Islands. We focus on the human...... reveal only minor changes in the agricultural system. Land use and land cover dynamics are related to agricultural strategies, demographic factors, institutional actors as well as biophysical drivers or constraints. Local agricultural production still contributes significantly to local subsistence...... is a supplement to a range of strategies supporting the increasing number of people on the island. This explains why land use patterns continue relatively unchanged while livelihood and food supply strategies have changed....

  18. Continuous spinal anesthesia.

    Science.gov (United States)

    Moore, James M

    2009-01-01

    Continuous spinal anesthesia (CSA) is an underutilized technique in modern anesthesia practice. Compared with other techniques of neuraxial anesthesia, CSA allows incremental dosing of an intrathecal local anesthetic for an indefinite duration, whereas traditional single-shot spinal anesthesia usually involves larger doses, a finite, unpredictable duration, and greater potential for detrimental hemodynamic effects including hypotension, and epidural anesthesia via a catheter may produce lesser motor block and suboptimal anesthesia in sacral nerve root distributions. This review compares CSA with other anesthetic techniques and also describes the history of CSA, its clinical applications, concerns regarding neurotoxicity, and other pharmacologic implications of its use. CSA has seen a waxing and waning of its popularity in clinical practice since its initial description in 1907. After case reports of cauda equina syndrome were reported with the use of spinal microcatheters for CSA, these microcatheters were withdrawn from clinical practice in the United States but continued to be used in Europe with no further neurologic sequelae. Because only large-bore catheters may be used in the United States, CSA is usually reserved for elderly patients out of concern for the risk of postdural puncture headache in younger patients. However, even in younger patients, sometimes the unique clinical benefits and hemodynamic stability involved in CSA outweigh concerns regarding postdural puncture headache. Clinical scenarios in which CSA may be of particular benefit include patients with severe aortic stenosis undergoing lower extremity surgery and obstetric patients with complex heart disease. CSA is an underutilized technique in modern anesthesia practice. Perhaps more accurately termed fractional spinal anesthesia, CSA involves intermittent dosing of local anesthetic solution via an intrathecal catheter. Where traditional spinal anesthesia involves a single injection with a

  19. Taming Technology

    Science.gov (United States)

    Branscomb, Lewis M.

    1971-01-01

    Reviews aspects of technology in our society: technology as a force for social change; reasons for the frustration and dissatisfaction with technology; how technology decentralizes power; the individual's influence; resolving conflicts in the ionized" society; regulation of technology; corporate responsibility; and the potential pitfalls for the…

  20. Assistive Technology

    Science.gov (United States)

    ... Page Resize Text Printer Friendly Online Chat Assistive Technology Assistive technology (AT) is any service or tool that helps ... be difficult or impossible. For older adults, such technology may be a walker to improve mobility or ...

  1. Sport Technology

    CSIR Research Space (South Africa)

    Kirkbride, T

    2007-11-01

    Full Text Available Technology is transforming the games themselves and at times with dire consequences. Tony Kirkbride, Head: CSIR Technology Centre said there are a variety of sports technologies and there have been advances in material sciences and advances...

  2. Continued Data Acquisition Development

    Energy Technology Data Exchange (ETDEWEB)

    Schwellenbach, David [National Security Technologies, LLC. (NSTec), Mercury, NV (United States)

    2017-11-27

    This task focused on improving techniques for integrating data acquisition of secondary particles correlated in time with detected cosmic-ray muons. Scintillation detectors with Pulse Shape Discrimination (PSD) capability show the most promise as a detector technology based on work in FY13. Typically PSD parameters are determined prior to an experiment and the results are based on these parameters. By saving data in list mode, including the fully digitized waveform, any experiment can effectively be replayed to adjust PSD and other parameters for the best data capture. List mode requires time synchronization of two independent data acquisitions (DAQ) systems: the muon tracker and the particle detector system. Techniques to synchronize these systems were studied. Two basic techniques were identified: real time mode and sequential mode. Real time mode is the preferred system but has proven to be a significant challenge since two FPGA systems with different clocking parameters must be synchronized. Sequential processing is expected to work with virtually any DAQ but requires more post processing to extract the data.

  3. Discrete and continuous simulation theory and practice

    CERN Document Server

    Bandyopadhyay, Susmita

    2014-01-01

    When it comes to discovering glitches inherent in complex systems-be it a railway or banking, chemical production, medical, manufacturing, or inventory control system-developing a simulation of a system can identify problems with less time, effort, and disruption than it would take to employ the original. Advantageous to both academic and industrial practitioners, Discrete and Continuous Simulation: Theory and Practice offers a detailed view of simulation that is useful in several fields of study.This text concentrates on the simulation of complex systems, covering the basics in detail and exploring the diverse aspects, including continuous event simulation and optimization with simulation. It explores the connections between discrete and continuous simulation, and applies a specific focus to simulation in the supply chain and manufacturing field. It discusses the Monte Carlo simulation, which is the basic and traditional form of simulation. It addresses future trends and technologies for simulation, with par...

  4. Petroleum demand continues to grow but slowly

    International Nuclear Information System (INIS)

    Anon.

    1998-01-01

    While it is always entertaining and intellectually stimulating to look at all the marvelous technological alternatives just around the corner for transport, the transport task in Australia continues to grow and so does petroleum consumption. Australia presently consumes more than 750,000 barrels per day of petroleum products. Latest figures are given for petroleum consumption up to the end of August 1998. They indicate that total demand for petrol has continued to grow, but very slowly. Growth in 1997-1998 compared with 1996-1997 was only 0.3%. This trend for very low growth has been continued into July and August, perhaps indicative of a slow down in the economy

  5. Enhancing infrastructure resilience through business continuity planning.

    Science.gov (United States)

    Fisher, Ronald; Norman, Michael; Klett, Mary

    2017-01-01

    Critical infrastructure is crucial to the functionality and wellbeing of the world around us. It is a complex network that works together to create an efficient society. The core components of critical infrastructure are dependent on one another to function at their full potential. Organisations face unprecedented environmental risks such as increased reliance on information technology and telecommunications, increased infrastructure interdependencies and globalisation. Successful organisations should integrate the components of cyber-physical and infrastructure interdependencies into a holistic risk framework. Physical security plans, cyber security plans and business continuity plans can help mitigate environmental risks. Cyber security plans are becoming the most crucial to have, yet are the least commonly found in organisations. As the reliance on cyber continues to grow, it is imperative that organisations update their business continuity and emergency preparedness activities to include this.

  6. Continuous quantum phase transitions

    Energy Technology Data Exchange (ETDEWEB)

    Sondhi, S.L. [Department of Physics, Princeton University, Princeton, New Jersey 08544 (United States); Girvin, S.M.; Carini, J.P. [Department of Physics, Indiana University, Bloomington, Indiana 47405 (United States); Shahar, D. [Department of Electrical Engineering, Princeton University, Princeton, New Jersey 08544 (United States)

    1997-01-01

    A quantum system can undergo a continuous phase transition at the absolute zero of temperature as some parameter entering its Hamiltonian is varied. These transitions are particularly interesting for, in contrast to their classical finite-temperature counterparts, their dynamic and static critical behaviors are intimately intertwined. Considerable insight is gained by considering the path-integral description of the quantum statistical mechanics of such systems, which takes the form of the {ital classical} statistical mechanics of a system in which time appears as an extra dimension. In particular, this allows the deduction of scaling forms for the finite-temperature behavior, which turns out to be described by the theory of finite-size scaling. It also leads naturally to the notion of a temperature-dependent dephasing length that governs the crossover between quantum and classical fluctuations. Using these ideas, a scaling analysis of experiments on Josephson-junction arrays and quantum-Hall-effect systems is presented. {copyright} {ital 1997} {ital The American Physical Society}

  7. Rover Technologies

    Data.gov (United States)

    National Aeronautics and Space Administration — Develop and mature rover technologies supporting robotic exploration including rover design, controlling rovers over time delay and for exploring . Technology...

  8. Nano technology

    International Nuclear Information System (INIS)

    Lee, In Sik

    2002-03-01

    This book is introduction of nano technology, which describes what nano technology is, alpha and omega of nano technology, the future of Korean nano technology and human being's future and nano technology. The contents of this book are nano period is coming, a engine of creation, what is molecular engineering, a huge nano technology, technique on making small things, nano materials with exorbitant possibility, the key of nano world the most desirable nano technology in bio industry, nano development plan of government, the direction of development for nano technology and children of heart.

  9. Occupancy in continuous habitat

    Science.gov (United States)

    Efford, Murray G.; Dawson, Deanna K.

    2012-01-01

    The probability that a site has at least one individual of a species ('occupancy') has come to be widely used as a state variable for animal population monitoring. The available statistical theory for estimation when detection is imperfect applies particularly to habitat patches or islands, although it is also used for arbitrary plots in continuous habitat. The probability that such a plot is occupied depends on plot size and home-range characteristics (size, shape and dispersion) as well as population density. Plot size is critical to the definition of occupancy as a state variable, but clear advice on plot size is missing from the literature on the design of occupancy studies. We describe models for the effects of varying plot size and home-range size on expected occupancy. Temporal, spatial, and species variation in average home-range size is to be expected, but information on home ranges is difficult to retrieve from species presence/absence data collected in occupancy studies. The effect of variable home-range size is negligible when plots are very large (>100 x area of home range), but large plots pose practical problems. At the other extreme, sampling of 'point' plots with cameras or other passive detectors allows the true 'proportion of area occupied' to be estimated. However, this measure equally reflects home-range size and density, and is of doubtful value for population monitoring or cross-species comparisons. Plot size is ill-defined and variable in occupancy studies that detect animals at unknown distances, the commonest example being unlimited-radius point counts of song birds. We also find that plot size is ill-defined in recent treatments of "multi-scale" occupancy; the respective scales are better interpreted as temporal (instantaneous and asymptotic) rather than spatial. Occupancy is an inadequate metric for population monitoring when it is confounded with home-range size or detection distance.

  10. Continuous Perioperative Sublingual Buprenorphine.

    Science.gov (United States)

    Silva, Marcelina Jasmine; Rubinstein, Andrea

    2016-12-01

    Buprenorphine, a semisynthetic thebaine derivative, is a unique opioid, as it has activity at multiple receptors, including mu (partial agonist), kappa (antagonist), OLR-1 (agonist), and delta (antagonist). Because buprenorphine's pharmacology is relatively complex, misconceptions about its actions are common. Most other opioids act solely or predominately as full mu receptor agonists. Common practice at many institutions calls for the cessation of regular buprenorphine use 48-72 hours prior to surgery. This practice is based on three foundational theories that have come from scant data about the properties of buprenorphine: (1) that buprenorphine is only a partial mu agonist and therefore is not a potent analgesic; (2) because buprenorphine has a ceiling effect on respiratory depression, it also has a ceiling effect on analgesia; and (3) that buprenorphine acts as a "blockade" to the analgesic effects of other opiates when coadministered due to its strong binding affinity. However, several recent studies have called this practice into question. At our institution, we continue buprenorphine perioperatively, whenever possible, in order to provide superior pain control, discourage potentially problematic use and the more dangerous side effects of full mu agonist opiates, and avoid putting recovery at risk for those with opiate dependency issues. We present a unique case comparing two different outcomes for the same surgical course performed at two different times on the same chronic pain patient. These differences may be attributable to the variable of buprenorphine being present for one perioperative course and not the other. Pain control was easier to achieve, and functional recovery was greater when buprenorphine was maintained throughout the perioperative period when compared with using a full mu agonist opioid for chronic pain preoperatively. This is an outcome that much of the literature heretofore suggests would be unlikely. We review some aspects of

  11. Appendicitis: a continuing challenge.

    Science.gov (United States)

    Pal, K M; Khan, A

    1998-07-01

    Acute appendicitis is a common surgical emergency in urban setting, of a developing country. The computerised hospital patient database at Aga Khan University Hospital, Karachi, was utilised to obtain records of all adults with a histologically proven diagnosis of acute appendicitis. A review of patients treated over a 18 month period was undertaken. One hundred and three appendicectomies were performed for acute appendicitis during this period. The diagnosis was clinical in all cases. Investigations like leucocyte count and lower abdominal ultrasound scan were used to improve diagnostic accuracy without a clear advantage. A number of routine investigations like, haemoglobin estimation and urea, creatinine, electrolyte measurements, did not provide additional information. The duration of antibiotic treatment in acute simple appendicitis was empiric and could be reduced to a single preoperative dose. Peritoneal fluid culture studies had a poor yield (26%) and results were not found to effect management in acute simple appendicitis. The routine use of Ampicillin in all cases of bacterial peritonitis needs re-evaluation, as a high incidence (73%) of resistance was seen. Studies to define the role and duration of treatment, with a single antibiotic, in acute simple appendicitis should be undertaken. Acute appendicitis is probably the most frequently considered surgical differential diagnosis at any hospital dealing with acute surgical conditions. The established treatment continues to be surgical removal of the inflamed organ. The diagnosis and decision to operate both are accepted to be based on clinical judgement, though a number of investigative manoeuvres have been described to reduce the negative appendicectomy rate. Other areas of debate are the number and length of antibiotic treatment and use of bacterial culture studies in cases of simple acute appendicitis. To analyse present practice and identify areas for study and change, a retrospective study was

  12. Accelerator technology in tokamaks

    International Nuclear Information System (INIS)

    Kustom, R.L.

    1977-01-01

    This article presents the similarities in the technology required for high energy accelerators and tokamak fusion devices. The tokamak devices and R and D programs described in the text represent only a fraction of the total fusion program. The technological barriers to producing successful, economical tokamak fusion power plants are as many as the plasma physics problems to be overcome. With the present emphasis on energy problems in this country and elsewhere, it is very likely that fusion technology related R and D programs will vigorously continue; and since high energy accelerator technology has so much in common with fusion technology, more scientists from the accelerator community are likely to be attracted to fusion problems

  13. Accelerator Technology Division: Annual Report FY 1990

    National Research Council Canada - National Science Library

    Schriber, Stanley

    1991-01-01

    The Accelerator Technology (AT) Division continued in fiscal year 1990 to fulfill its mission of developing accelerator science and technology for application to research, defense, energy, and other problems of national interest...

  14. Educational technology in medical education.

    Science.gov (United States)

    Han, Heeyoung; Resch, David S; Kovach, Regina A

    2013-01-01

    This article aims to review the past practices of educational technology and envision future directions for medical education. The discussion starts with a historical review of definitions and perspectives of educational technology, in which the authors propose that educators adopt a broader process-oriented understanding of educational technology. Future directions of e-learning, simulation, and health information technology are discussed based on a systems view of the technological process. As new technologies continue to arise, this process-oriented understanding and outcome-based expectations of educational technology should be embraced. With this view, educational technology should be valued in terms of how well the technological process informs and facilitates learning, and the acquisition and maintenance of clinical expertise.

  15. Information Technology

    Science.gov (United States)

    2003-01-01

    The first wave delivered a range of services to most areas of the world through a vast, carefully constructed global network. Cellular technology ...Information Technology and Services Alliance. Digital Planet 2002: The Global Information Economy. February 2002. Yegyazarian, Anush. Sales Taxes...Information Technology ABSTRACT: The information technology (IT) industry affects virtually every industry in the n economy. During the late 90

  16. Wireless Communication Technologies

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. Wireless Communication Technologies. Since 1999, the wireless LAN has experienced a tremendous growth. Reasons: Adoption of industry standards. Interoperability testing. The progress of wireless equipments to higher data rates. Rapid decrease in product ...

  17. Water Treatment Technology - Wells.

    Science.gov (United States)

    Ross-Harrington, Melinda; Kincaid, G. David

    One of twelve water treatment technology units, this student manual on wells provides instructional materials for five competencies. (The twelve units are designed for a continuing education training course for public water supply operators.) The competencies focus on the following areas: dug, driven, and chilled wells, aquifer types, deep well…

  18. Water Treatment Technology - Pumps.

    Science.gov (United States)

    Ross-Harrington, Melinda; Kincaid, G. David

    One of twelve water treatment technology units, this student manual on pumps provides instructional materials for three competencies. (The twelve units are designed for a continuing education training course for public water supply operators.) The competencies focus on the following areas: types of pumps in plant and distribution systems, pump…

  19. Water Treatment Technology - Springs.

    Science.gov (United States)

    Ross-Harrington, Melinda; Kincaid, G. David

    One of twelve water treatment technology units, this student manual on springs provides instructional materials for two competencies. (The twelve units are designed for a continuing education training course for public water supply operators.) The competencies focus on spring basin construction and spring protection. For each competency, student…

  20. Water Treatment Technology - Flouridation.

    Science.gov (United States)

    Ross-Harrington, Melinda; Kincaid, G. David

    One of twelve water treatment technology units, this student manual on flouridation provides instructional materials for three competencies. (The twelve units are designed for a continuing education training course for public water supply operators.) The competencies focus on the following areas: purpose and process of flouridation, correct…

  1. Water Treatment Technology - Filtration.

    Science.gov (United States)

    Ross-Harrington, Melinda; Kincaid, G. David

    One of twelve water treatment technology units, this student manual on filtration provides instructional materials for six competencies. (The twelve units are designed for a continuing education training course for public water supply operators.) The competencies focus on the following areas: purposes of sedimentation basins and flocculation…

  2. Water Treatment Technology - Hydraulics.

    Science.gov (United States)

    Ross-Harrington, Melinda; Kincaid, G. David

    One of twelve water treatment technology units, this student manual on hydraulics provides instructional materials for three competencies. (The twelve units are designed for a continuing education training course for public water supply operators.) The competencies focus on the following areas: head loss in pipes in series, function loss in…

  3. Water Treatment Technology - Chlorination.

    Science.gov (United States)

    Ross-Harrington, Melinda; Kincaid, G. David

    One of twelve water treatment technology units, this student manual on chlorination provides instructional materials for nine competencies. (The twelve units are designed for a continuing education training course for public water supply operators.) The competencies focus on the following areas: purpose and process of chlorination, chlorine…

  4. Understanding University Technology Transfer

    Science.gov (United States)

    Association of American Universities, 2011

    2011-01-01

    Federal government agencies provide about $33 billion a year to universities to conduct scientific research. That continuing investment expands human knowledge and helps educate the next generation of science and technology leaders. New discoveries from university research also form the basis for many new products and processes that benefit the…

  5. Development of technology for thin substrate polycrystalline solar cells for practical use. Development of manufacturing technologies for low-cost substrates (low-cost Si sheets by continuous casting method); Usugata takessho taiyo denchi seizo gijutsu no jitsuyoka kenkyu. Tei cost kiban seizo gijutsu kaihatsu (renzoku cast ho ni yoru tei cost Si kiban seizo gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the study results on manufacturing of low-cost Si substrates by continuous casting method in fiscal 1994. (1) On manufacturing of ingots of 16 piece size, the ingot of nearly 170kg was manufactured by batch process using the Si melt injection unit prepared in last year. (2) On oxygen and carbon contents in wafers, the contents were measured by FT-IR after slicing of the ingot. As a result, the oxygen and carbon contents could be successfully reduced to the targets of 10ppma and 5ppma or less, respectively. (3) The resistivity distribution of the ingot ranged over the target of 1-2ohm-cm. (4) Cells of 100 {times} 100mm{sup 2} wide and 350{mu}m thick were verified by in-house evaluation process. Although lower cell conversion efficiency was found at the center top of the ingot, a vertical efficiency stability was nearly sufficient as a whole. (5) On the crystal growth unit prepared in fiscal 1994, any problems were not found on automatic driving and vibration during moving. 8 figs.

  6. Electronic technology

    International Nuclear Information System (INIS)

    Kim, Jin Su

    2010-07-01

    This book is composed of five chapters, which introduces electronic technology about understanding of electronic, electronic component, radio, electronic application, communication technology, semiconductor on its basic, free electron and hole, intrinsic semiconductor and semiconductor element, Diode such as PN junction diode, characteristic of junction diode, rectifier circuit and smoothing circuit, transistor on structure of transistor, characteristic of transistor and common emitter circuit, electronic application about electronic equipment, communication technology and education, robot technology and high electronic technology.

  7. Business and Continuity of Operations

    Science.gov (United States)

    Tosh, Pritish K.; Feldman, Henry; Christian, Michael D.; Devereaux, Asha V.; Kissoon, Niranjan; Christian, Michael D.; Devereaux, Asha V.; Dichter, Jeffrey R.; Kissoon, Niranjan; Rubinson, Lewis; Amundson, Dennis; Anderson, Michael R.; Balk, Robert; Barfield, Wanda D.; Bartz, Martha; Benditt, Josh; Beninati, William; Berkowitz, Kenneth A.; Daugherty Biddison, Lee; Braner, Dana; Branson, Richard D; Burkle, Frederick M.; Cairns, Bruce A.; Carr, Brendan G.; Courtney, Brooke; DeDecker, Lisa D.; De Jong, Marla J.; Dominguez-Cherit, Guillermo; Dries, David; Einav, Sharon; Erstad, Brian L.; Etienne, Mill; Fagbuyi, Daniel B.; Fang, Ray; Feldman, Henry; Garzon, Hernando; Geiling, James; Gomersall, Charles D.; Grissom, Colin K.; Hanfling, Dan; Hick, John L.; Hodge, James G.; Hupert, Nathaniel; Ingbar, David; Kanter, Robert K.; King, Mary A.; Kuhnley, Robert N.; Lawler, James; Leung, Sharon; Levy, Deborah A.; Lim, Matthew L.; Livinski, Alicia; Luyckx, Valerie; Marcozzi, David; Medina, Justine; Miramontes, David A.; Mutter, Ryan; Niven, Alexander S.; Penn, Matthew S.; Pepe, Paul E.; Powell, Tia; Prezant, David; Reed, Mary Jane; Rich, Preston; Rodriquez, Dario; Roxland, Beth E.; Sarani, Babak; Shah, Umair A.; Skippen, Peter; Sprung, Charles L.; Subbarao, Italo; Talmor, Daniel; Toner, Eric S.; Tosh, Pritish K.; Upperman, Jeffrey S.; Uyeki, Timothy M.; Weireter, Leonard J.; West, T. Eoin; Wilgis, John; Ornelas, Joe; McBride, Deborah; Reid, David; Baez, Amado; Baldisseri, Marie; Blumenstock, James S.; Cooper, Art; Ellender, Tim; Helminiak, Clare; Jimenez, Edgar; Krug, Steve; Lamana, Joe; Masur, Henry; Mathivha, L. Rudo; Osterholm, Michael T.; Reynolds, H. Neal; Sandrock, Christian; Sprecher, Armand; Tillyard, Andrew; White, Douglas; Wise, Robert; Yeskey, Kevin

    2014-01-01

    BACKGROUND: During disasters, supply chain vulnerabilities, such as power, transportation, and communication, may affect the delivery of medications and medical supplies and hamper the ability to deliver critical care services. Disasters also have the potential to disrupt information technology (IT) in health-care systems, resulting in interruptions in patient care, particularly critical care, and other health-care business functions. The suggestions in this article are important for all of those involved in a large-scale pandemic or disaster with multiple critically ill or injured patients, including front-line clinicians, hospital administrators, and public health or government officials. METHODS: The Business and Continuity of Operations Panel followed the American College of Chest Physicians (CHEST) Guidelines Oversight Committee’s methodology in developing key questions regarding medication and supply shortages and the impact disasters may have on healthcare IT. Task force members met in person to develop the 13 key questions believed to be most relevant for Business and Continuity of Operations. A systematic literature review was then performed for relevant articles and documents, reports, and gray literature reported since 2007. No studies of sufficient quality were identified upon which to make evidence-based recommendations. Therefore, the panel developed expert opinion-based suggestions using a modified Delphi process. RESULTS: Eighteen suggestions addressing mitigation strategies for supply chain vulnerabilities including medications and IT were generated. Suggestions offered to hospitals and health system leadership regarding medication and supply shortages include: (1) purchase key medications and supplies from more than one supplier, (2) substituted medications or supplies should ideally be similar to those already used by an institution’s providers, (3) inventories should be tracked electronically to monitor medication/supply levels, (4) consider

  8. Turn Continuation and Clause Combinations

    Science.gov (United States)

    Couper-Kuhlen, Elizabeth

    2012-01-01

    This article explores the viability of the analytic distinction between "turn-constructional unit (TCU) continuation" (i.e., continuing a turn beyond a point of possible completion with grammatically dependent material) and "new TCU" (i.e., continuing a turn with grammatically independent material) when hypotactic clause combinations are involved.…

  9. Continuous learning in computer vision

    NARCIS (Netherlands)

    Pintea, S.L.

    2017-01-01

    In this thesis we focus on continuous learning, and specifically on continuous learning in the context of computer vision. Computer vision aims at interpreting the world from its visual dimension, in an automatic manner. The world in general is characterized by continuity, and so is the visual world

  10. Exoplanets: The Hunt Continues!

    Science.gov (United States)

    2001-04-01

    Swiss Telescope at La Silla Very Successful Summary The intensive and exciting hunt for planets around other stars ( "exoplanets" ) is continuing with great success in both hemispheres. Today, an international team of astronomers from the Geneva Observatory and other research institutes [1] is announcing the discovery of no less than eleven new, planetary companions to solar-type stars, HD 8574, HD 28185, HD 50554, HD 74156, HD 80606, HD 82943, HD 106252, HD 141937, HD 178911B, HD 141937, among which two new multi-planet systems . The masses of these new objects range from slightly less than to about 10 times the mass of the planet Jupiter [2]. The new detections are based on measured velocity changes of the stars [3], performed with the CORALIE spectrometer on the Swiss 1.2-m Leonard Euler telescope at the ESO La Silla Observatory , as well as with instruments on telescopes at the Haute-Provence Observatory and on the Keck telescopes on Mauna Kea (Hawaii, USA). Some of the new planets are unusual: * a two-planet system (around the star HD 82943) in which one orbital period is nearly exactly twice as long as the other - cases like this (refered to as "orbital resonance") are well known in our own solar system; * another two-planet system (HD 74156), with a Jupiter-like planet and a more massive planet further out; * a planet with the most elongated orbit detected so far (HD 80606), moving between 5 and 127 million kilometers from the central star; * a giant planet moving in an orbit around its Sun-like central star that is very similar to the one of the Earth and whose potential satellites (in theory, at least) might be "habitable". At this moment, there are 63 know exoplanet candidates with minimum masses below 10 Jupiter masses, and 67 known objects with minimum masses below 17 Jupiter masses. The present team of astronomers has detected about half of these. PR Photo 13a/01 : Radial-velocity measurements of HD 82943, a two-planet system . PR Photo 13b/01 : Radial

  11. Managing technological and environmental dynamics

    DEFF Research Database (Denmark)

    Madsen, Henning; Ulhøi, John Parm

    2001-01-01

    The field of MoT cannot continue indefinitely to ignore the importance of the natural environment as a fundamental basis for technological development. This paper will therefore focus on the various linkages between management of technology and sustainable development, discussing both the current...

  12. Technology Education and the Arts

    Science.gov (United States)

    Roman, Harry T.

    2009-01-01

    One hears quite frequently how the arts continually suffer in the academic day. Many long-time technology education champions certainly know what this is all about; but there may be some ways to use technology education to bring the arts into the classroom. This article offers a series of activities and suggestions that will help students better…

  13. What's on the Technology Horizon?

    OpenAIRE

    Kelly, Brian

    2011-01-01

    We are continuing to see rapid technological developments taking place which will affect those working in the library sector. But unlike the technological developments we saw in the mid-1990s following the release of the Web and its acceptance as a transformative technology, we are now in the midst of significant political and funding changes which will affect the working practices of those working in the information profession. This paper describes recent work sponsored by the JISC Innovatio...

  14. Globalization & technology

    DEFF Research Database (Denmark)

    Narula, Rajneesh

    Technology and globalization are interdependent processes. Globalization has a fundamental influence on the creation and diffusion of technology, which, in turn, affects the interdependence of firms and locations. This volume examines the international aspect of this interdependence at two levels...

  15. Living Technology

    DEFF Research Database (Denmark)

    2010-01-01

    This book is aimed at anyone who is interested in learning more about living technology, whether coming from business, the government, policy centers, academia, or anywhere else. Its purpose is to help people to learn what living technology is, what it might develop into, and how it might impact...... our lives. The phrase 'living technology' was coined to refer to technology that is alive as well as technology that is useful because it shares the fundamental properties of living systems. In particular, the invention of this phrase was called for to describe the trend of our technology becoming...... increasingly life-like or literally alive. Still, the phrase has different interpretations depending on how one views what life is. This book presents nineteen perspectives on living technology. Taken together, the interviews convey the collective wisdom on living technology's power and promise, as well as its...

  16. Technology transfer quality assurance

    International Nuclear Information System (INIS)

    Hood, F.C.

    1991-03-01

    The results of research conducted at Pacific Northwest Laboratory (PNL) for the DOE are regularly transferred from the laboratory to the private sector. The principal focus of PNL is on environmental research and waste management technology; other programs of emphasis include molecular science research. The technology transfer process is predicated on Quality to achieve its objectives effectively. Total quality management (TQM) concepts and principles readily apply to the development and translation of new scientific concepts into commercial products. The concept of technology transfer epitomizes the TQM tenet of continuous improvement: always striving for a better way to do things and always satisfying the customer. A successful technology transfer process adds value to society by providing new or enhanced processes, products, and services to government and commercial customers, with a guarantee of product pedigree and process validity. 2 refs

  17. Continuous-variable blind quantum computation.

    Science.gov (United States)

    Morimae, Tomoyuki

    2012-12-07

    Blind quantum computation is a secure delegated quantum computing protocol where Alice, who does not have sufficient quantum technology at her disposal, delegates her computation to Bob, who has a fully fledged quantum computer, in such a way that Bob cannot learn anything about Alice's input, output, and algorithm. Protocols of blind quantum computation have been proposed for several qudit measurement-based computation models, such as the graph state model, the Affleck-Kennedy-Lieb-Tasaki model, and the Raussendorf-Harrington-Goyal topological model. Here, we consider blind quantum computation for the continuous-variable measurement-based model. We show that blind quantum computation is possible for the infinite squeezing case. We also show that the finite squeezing causes no additional problem in the blind setup apart from the one inherent to the continuous-variable measurement-based quantum computation.

  18. VIRTUAL ENVIRONMENT FOR CONTINUING MEDICAL EDUCATION

    Directory of Open Access Journals (Sweden)

    Sorana D. BOLBOACA

    2007-01-01

    Full Text Available The rapid development of communication and information technologies lead to the changes in continuing medical education by offering the possibility to move up-to-date medical information through Internet to the physicians. The main goal of this study was to create a virtual space for continuing medical education. In this context, a number of computer-assisted tools for instruction, evaluation and utilization in daily activity have been developed and integrated into a unitary system. The main imposed specifications of the system were accessibility, integrity, availability, and security.This report describes the characteristics of tables design and organization, and of system integration. The security level was imposed for assuring the accessibility of each physician to medical information useful in his or her activity and the knowledge database development.

  19. Earthing Technology

    NARCIS (Netherlands)

    Blok, Vincent

    2017-01-01

    In this article, we reflect on the conditions under which new technologies emerge in the Anthropocene and raise the question of how to conceptualize sustainable technologies therein. To this end, we explore an eco-centric approach to technology development, called biomimicry. We discuss opposing

  20. Technology Tiers

    DEFF Research Database (Denmark)

    Karlsson, Christer

    2015-01-01

    A technology tier is a level in a product system: final product, system, subsystem, component, or part. As a concept, it contrasts traditional “vertical” special technologies (for example, mechanics and electronics) and focuses “horizontal” feature technologies such as product characteristics...

  1. The Continued Assessment of Self-Continuity and Identity

    Science.gov (United States)

    Dunkel, Curtis S.; Minor, Leslie; Babineau, Maureen

    2010-01-01

    Studies have found that self-continuity is predictive of a substantial number of important outcome variables. However, a recent series of studies brings into question the traditional method of measuring self-continuity in favor of an alternative (B. M. Baird, K. Le, & R. E. Lucas, 2006). The present study represents a further comparison of…

  2. Beyond Continuous Delivery: An Empirical Investigation of Continuous Deployment Challenges

    DEFF Research Database (Denmark)

    Shahin, Mojtaba; Ali Babar, Muhammad; Zahedi, Mansooreh

    2017-01-01

    Context: A growing number of software organizations have been adopting Continuous DElivery (CDE) and Continuous Deployment (CD) practices. Researchers have started investing significant efforts in studying different aspects of CDE and CD. Many studies refer to CDE (i.e., where an application is p...

  3. Technology integration project: Environmental Restoration Technologies Department Sandia National Laboratories

    Energy Technology Data Exchange (ETDEWEB)

    Williams, C.V.; Burford, T.D. [Sandia National Labs., Albuquerque, NM (United States). Environmental Restoration Technologies; Allen, C.A. [Tech Reps, Inc., Albuquerque, NM (United States)

    1996-08-01

    Sandia National Laboratories Environmental Restoration Technologies Department is developing environmental restoration technologies through funding form the US Department of Energy`s (DOE`s) Office of Science and Technology. Initially, this technology development has been through the Mixed Waste Landfill Integrated Demonstration (MWLID). It is currently being developed through the Contaminant Plume containment and Remediation Focus Area, the Landfill Stabilization Focus Area, and the Characterization, Monitoring, and Sensor Cross-Cutting Program. This Technology Integration Project (TIP) was responsible for transferring MWLID-developed technologies for routine use by environmental restoration groups throughout the DOE complex and commercializing these technologies to the private sector. The MWLID`s technology transfer/commercialization successes were achieved by involving private industry in development, demonstration, and technology transfer/commercialization activities; gathering and disseminating information about MWLID activities and technologies; and promoting stakeholder and regulatory involvement. From FY91 through FY95, 30 Technical Task Plans (TTPs) were funded. From these TTPs, the MWLID can claim 15 technology transfer/commercialization successes. Another seven technology transfer/commercialization successes are expected. With the changeover to the focus areas, the TIP continued the technology transfer/commercialization efforts begun under the MWLID.

  4. Technology integration project: Environmental Restoration Technologies Department Sandia National Laboratories

    International Nuclear Information System (INIS)

    Williams, C.V.; Burford, T.D.

    1996-08-01

    Sandia National Laboratories Environmental Restoration Technologies Department is developing environmental restoration technologies through funding form the US Department of Energy's (DOE's) Office of Science and Technology. Initially, this technology development has been through the Mixed Waste Landfill Integrated Demonstration (MWLID). It is currently being developed through the Contaminant Plume containment and Remediation Focus Area, the Landfill Stabilization Focus Area, and the Characterization, Monitoring, and Sensor Cross-Cutting Program. This Technology Integration Project (TIP) was responsible for transferring MWLID-developed technologies for routine use by environmental restoration groups throughout the DOE complex and commercializing these technologies to the private sector. The MWLID's technology transfer/commercialization successes were achieved by involving private industry in development, demonstration, and technology transfer/commercialization activities; gathering and disseminating information about MWLID activities and technologies; and promoting stakeholder and regulatory involvement. From FY91 through FY95, 30 Technical Task Plans (TTPs) were funded. From these TTPs, the MWLID can claim 15 technology transfer/commercialization successes. Another seven technology transfer/commercialization successes are expected. With the changeover to the focus areas, the TIP continued the technology transfer/commercialization efforts begun under the MWLID

  5. Mercury Continuous Emmission Monitor Calibration

    Energy Technology Data Exchange (ETDEWEB)

    John Schabron; Eric Kalberer; Ryan Boysen; William Schuster; Joseph Rovani

    2009-03-12

    Mercury continuous emissions monitoring systems (CEMs) are being implemented in over 800 coal-fired power plant stacks throughput the U.S. Western Research Institute (WRI) is working closely with the Electric Power Research Institute (EPRI), the National Institute of Standards and Technology (NIST), and the Environmental Protection Agency (EPA) to facilitate the development of the experimental criteria for a NIST traceability protocol for dynamic elemental mercury vapor calibrators/generators. These devices are used to calibrate mercury CEMs at power plant sites. The Clean Air Mercury Rule (CAMR) which was published in the Federal Register on May 18, 2005 and vacated by a Federal appeals court in early 2008 required that calibration be performed with NIST-traceable standards. Despite the vacature, mercury emissions regulations in the future will require NIST traceable calibration standards, and EPA does not want to interrupt the effort towards developing NIST traceability protocols. The traceability procedures will be defined by EPA. An initial draft traceability protocol was issued by EPA in May 2007 for comment. In August 2007, EPA issued a conceptual interim traceability protocol for elemental mercury calibrators. The protocol is based on the actual analysis of the output of each calibration unit at several concentration levels ranging initially from about 2-40 {micro}g/m{sup 3} elemental mercury, and in the future down to 0.2 {micro}g/m{sup 3}, and this analysis will be directly traceable to analyses by NIST. The EPA traceability protocol document is divided into two separate sections. The first deals with the qualification of calibrator models by the vendors for use in mercury CEM calibration. The second describes the procedure that the vendors must use to certify the calibrators that meet the qualification specifications. The NIST traceable certification is performance based, traceable to analysis using isotope dilution inductively coupled plasma

  6. Technology Applications Team: Applications of aerospace technology

    Science.gov (United States)

    1993-01-01

    Highlights of the Research Triangle Institute (RTI) Applications Team activities over the past quarter are presented in Section 1.0. The Team's progress in fulfilling the requirements of the contract is summarized in Section 2.0. In addition to our market-driven approach to applications project development, RTI has placed increased effort on activities to commercialize technologies developed at NASA Centers. These Technology Commercialization efforts are summarized in Section 3.0. New problem statements prepared by the Team in the reporting period are presented in Section 4.0. The Team's transfer activities for ongoing projects with the NASA Centers are presented in Section 5.0. Section 6.0 summarizes the status of four add-on tasks. Travel for the reporting period is described in Section 7.0. The RTI Team staff and consultants and their project responsibilities are listed in Appendix A. The authors gratefully acknowledge the contributions of many individuals to the RTI Technology Applications Team program. The time and effort contributed by managers, engineers, and scientists throughout NASA were essential to program success. Most important to the program has been a productive working relationship with the NASA Field Center Technology Utilization (TU) Offices. The RTI Team continues to strive for improved effectiveness as a resource to these offices. Industry managers, technical staff, medical researchers, and clinicians have been cooperative and open in their participation. The RTI Team looks forward to continuing expansion of its interaction with U.S. industry to facilitate the transfer of aerospace technology to the private sector.

  7. Emerging Communication Technologies (ECT) Phase 4 Report

    Science.gov (United States)

    Bastin, Gary L.; Harris, William G.; Marin, Jose A.; Nelson, Richard A.

    2005-01-01

    The Emerging Communication Technology (ECT) project investigated three First Mile communication technologies in support of NASA s Crew Exploration Vehicle (CEV), Advanced Range Technology Working Group (ARTWG), and the Advanced Spaceport Technology Working Group (ASTWG). These First Mile technologies have the purpose of interconnecting mobile users with existing Range Communication infrastructures on a 24/7 basis. ECT is a continuation of the Range Information System Management (RISM) task started in 2002. This is the fourth year of the project.

  8. Continuous acoustic emission from aluminium

    International Nuclear Information System (INIS)

    Fenici, P.; Kiesewetter, N.; Schiller, P.

    1976-01-01

    Continuous acoustic emission of aluminum single crystals and polycrystals during tensile tests at constant cross-head speed and at room temperature is measured with a Root Mean Square Level recorder. By means of the Kaiser effect it is shown that the continuous emission is related to the plastic deformation. The plot of continuous emission against strain takes different shapes for pure single crystals, pure polycrystals and impure polycrystals. The measured voltages have about the same value for pure single and polycrystals and are considerably greater than that for impure polycrystals. A method is developed to distinguish between continuous emission and burst

  9. Technology and the Nature of Man: Biological Considerations. An Occasional Paper on Man/Society/Technology.

    Science.gov (United States)

    Sherwood, Lauralee

    This seminar paper explores biological aspects of the man-technology relationship. From man's beginning and continuing into the future, technology is interwoven extensively in the biological fabric of man. Five facets of the biology-technology interaction are examined: (1) technological innovations enabling man to learn about his biological…

  10. Digital Actuator Technology

    Energy Technology Data Exchange (ETDEWEB)

    Ken Thomas; Ted Quinn; Jerry Mauck; Richard Bockhorst

    2014-09-01

    There are significant developments underway in new types of actuators for power plant active components. Many of these make use of digital technology to provide a wide array of benefits in performance of the actuators and in reduced burden to maintain them. These new product offerings have gained considerable acceptance in use in process plants. In addition, they have been used in conventional power generation very successfully. This technology has been proven to deliver the benefits promised and substantiate the claims of improved performance. The nuclear industry has been reluctant to incorporate digital actuator technology into nuclear plant designs due to concerns due to a number of concerns. These could be summarized as cost, regulatory uncertainty, and a certain comfort factor with legacy analog technology. The replacement opportunity for these types of components represents a decision point for whether to invest in more modern technology that would provide superior operational and maintenance benefits. Yet, the application of digital technology has been problematic for the nuclear industry, due to qualification and regulatory issues. With some notable exceptions, the result has been a continuing reluctance to undertake the risks and uncertainties of implementing digital actuator technology when replacement opportunities present themselves. Rather, utilities would typically prefer to accept the performance limitations of the legacy analog actuator technologies to avoid impacts to project costs and schedules. The purpose of this report is to demonstrate that the benefits of digital actuator technology can be significant in terms of plant performance and that it is worthwhile to address the barriers currently holding back the widespread development and use of this technology. It addresses two important objectives in pursuit of the beneficial use of digital actuator technology for nuclear power plants: 1. To demonstrate the benefits of digital actuator

  11. Soulful Technologies

    DEFF Research Database (Denmark)

    Fausing, Bent

    2010-01-01

    or anthropomorphism is important for the branding of new technology. Technology is seen as creating a techno-transcendence towards a more qualified humanity which is in contact with fundamental human values like intuition, vision, and sensing; all the qualities that technology, industrialization, and rationalization......, - in short modernity - have taken away from human existence. What old technology has removed now comes back through new technology promoting a better humanity. The present article investigates how digital technology and affects are presented and combined, with examples from everyday imagery, e.g. TV......Samsung introduced in 2008 a mobile phone called "Soul" made with a human touch and including itself a "magic touch". Through the analysis of a Nokia mobile phone TV-commercials I want to examine the function and form of digital technology in everyday images. The mobile phone and its digital camera...

  12. Contra omega\\ beta-continuity

    Directory of Open Access Journals (Sweden)

    Hiam H. Aljarrah

    2014-09-01

    sets in topological spaces to present and study a new class of functions called contra omega\\beta-continuous functions. This notion is a weak form of contra-continuity. We also discuss the relationships between this new class and other classes of functions and some examples of applications are shown.

  13. Perspectives: The Continuous Improvement Trap

    Science.gov (United States)

    Arnold, David L.

    2011-01-01

    Accrediting agencies, legislators, pundits, and even higher educational professionals have become enamored with applying the language of continuous improvement to learning outcomes. The Southern Association of Colleges and Schools Commission on Colleges specifically uses the term "continuing improvement" in Core Standard 2.5, one of its…

  14. Continuous supersonic plasma wind tunnel

    DEFF Research Database (Denmark)

    Andersen, S.A.; Jensen, Vagn Orla; Nielsen, P.

    1968-01-01

    The B field configuration of a Q-device has been modified into a magnetic Laval nozzle. Continuous supersonic plasma flow is observed with M≈3......The B field configuration of a Q-device has been modified into a magnetic Laval nozzle. Continuous supersonic plasma flow is observed with M≈3...

  15. Continual integral in perturbation theory

    International Nuclear Information System (INIS)

    Slavnov, A.A.

    1975-01-01

    It is shown that all results obtained by means of continual integration within the framework of perturbation theory are completely equivalent to those obtained by the usual diagram technique and are therfore just as rigorous. A rigorous justification is given for the rules for operating with continual integrals in perturbation theory. (author)

  16. Rational Exponentials and Continued Fractions

    Science.gov (United States)

    Denny, J. K.

    2012-01-01

    Using continued fraction expansions, we can approximate constants, such as pi and e, using an appropriate integer n raised to the power x[superscript 1/x], x a suitable rational. We review continued fractions and give an algorithm for producing these approximations.

  17. Technology '90

    International Nuclear Information System (INIS)

    1991-01-01

    The US Department of Energy (DOE) laboratories have a long history of excellence in performing research and development in a number of areas, including the basic sciences, applied-energy technology, and weapons-related technology. Although technology transfer has always been an element of DOE and laboratory activities, it has received increasing emphasis in recent years as US industrial competitiveness has eroded and efforts have increased to better utilize the research and development resources the laboratories provide. This document, Technology '90, is the latest in a series that is intended to communicate some of the many opportunities available for US industry and universities to work with the DOE and its laboratories in the vital activity of improving technology transfer to meet national needs. Technology '90 is divided into three sections: Overview, Technologies, and Laboratories. The Overview section describes the activities and accomplishments of the DOE research and development program offices. The Technologies section provides descriptions of new technologies developed at the DOE laboratories. The Laboratories section presents information on the missions, programs, and facilities of each laboratory, along with a name and telephone number of a technology transfer contact for additional information. Separate papers were prepared for appropriate sections of this report

  18. Formal Verification of Continuous Systems

    DEFF Research Database (Denmark)

    Sloth, Christoffer

    2012-01-01

    The purpose of this thesis is to develop a method for verifying timed temporal properties of continuous dynamical systems, and to develop a method for verifying the safety of an interconnection of continuous systems. The methods must be scalable in the number of continuous variables...... to the high complexity of both the dynamical system and the specification. Therefore, there is a need for methods capable of verifying complex specifications of complex systems. The verification of high dimensional continuous dynamical systems is the key to verifying general systems. In this thesis......, an abstraction approach is taken to the verification problem. A method is developed for abstracting continuous dynamical systems by timed automata. This method is based on subdividing the state space into cells by use of subdivisioning functions that are decreasing along the vector field. To allow...

  19. RFID Continuance Usage Intention in Health Care Industry.

    Science.gov (United States)

    Iranmanesh, Mohammad; Zailani, Suhaiza; Nikbin, Davoud

    Radio-frequency identification (RFID) has been proved to be an effective tool both for improving operational efficiency and for gaining competitive advantage in the health care industry despite its relatively low-usage rate in hospitals. The sustained use of RFID by health care professionals will promote its development in the long term. This study evaluates the acceptance continuance of RFID among health care professionals through technology continuance theory (TCT). Data were collected from 178 medical professionals in Malaysia and were then analyzed using the partial least squares technique. The analysis showed that the TCT model provided not only a thorough understanding of the continuance behavior of health care professionals toward RFID but also the attitudes, satisfaction, and perceived usefulness of professionals toward it. The results of this study are expected to assist policy makers and managers in the health care industry in implementing the RFID technology in hospitals by understanding the determinants of continuance of RFID usage intention.

  20. Sensemaking technologies

    DEFF Research Database (Denmark)

    Madsen, Charlotte Øland

    Research scope: The scope of the project is to study technological implementation processes by using Weick's sensemaking concept (Weick, 1995). The purpose of using a social constructivist approach to investigate technological implementation processes is to find out how new technologies transform...... patterns of social action and interaction in organisations (Barley 1986; 1990, Orlikowski 2000). Current research in the field shows that new technologies affect organisational routines/structures/social relationships/power relations/dependencies and alter organisational roles (Barley 1986; 1990, Burkhardt......, Orlikowski 2000). Viewing the use of technology as a process of enactment opens up for investigating the social processes of interpreting new technology into the organisation (Orlikowski 2000). The scope of the PhD project will therefore be to gain a deeper understanding of how the enactment of new...

  1. Technological risks

    International Nuclear Information System (INIS)

    Klinke, A.; Renn, O.

    1998-01-01

    The empirical part about the technological risks deals with different technologies: nuclear energy, early warning systems of nuclear weapons and NBC-weapons, and electromagnetic fields. The potential of damage, the contemporary management strategies and the relevant characteristics will be described for each technology: risks of nuclear energy; risks of early warning systems of nuclear weapons and NBC-weapons; risks of electromagnetic fields. (authors)

  2. Technological risks

    Energy Technology Data Exchange (ETDEWEB)

    Klinke, A.; Renn, O. [Center of Technology Assessment in Baden-Wuerttemberg, Stuttgart (Germany)

    1998-07-01

    The empirical part about the technological risks deals with different technologies: nuclear energy, early warning systems of nuclear weapons and NBC-weapons, and electromagnetic fields. The potential of damage, the contemporary management strategies and the relevant characteristics will be described for each technology: risks of nuclear energy; risks of early warning systems of nuclear weapons and NBC-weapons; risks of electromagnetic fields. (authors)

  3. Technology alliances

    International Nuclear Information System (INIS)

    Torgerson, D.F.; Boczar, P.G.; Kugler, G.

    1991-10-01

    In the field of nuclear technology, Canada and Korea developed a highly successful relationship that could serve as a model for other high-technology industries. This is particularly significant when one considers the complexity and technical depth required to design, build and operate a nuclear reactor. This paper will outline the overall framework for technology transfer and cooperation between Canada and Korea, and will focus on cooperation in nuclear R and D between the two countries

  4. COPPER CABLE RECYCLING TECHNOLOGY

    International Nuclear Information System (INIS)

    Chelsea Hubbard

    2001-01-01

    The United States Department of Energy (DOE) continually seeks safer and more cost-effective technologies for use in deactivation and decommissioning (D and D) of nuclear facilities. The Deactivation and Decommissioning Focus Area (DDFA) of the DOE's Office of Science and Technology (OST) sponsors large-scale demonstration and deployment projects (LSDDPs). At these LSDDPs, developers and vendors of improved or innovative technologies showcase products that are potentially beneficial to the DOE's projects and to others in the D and D community. Benefits sought include decreased health and safety risks to personnel and the environment, increased productivity, and decreased costs of operation. The Idaho National Engineering and Environmental Laboratory (INEEL) generated a list of statements defining specific needs and problems where improved technology could be incorporated into ongoing D and D tasks. One such need is to reduce the volume of waste copper wire and cable generated by D and D. Deactivation and decommissioning activities of nuclear facilities generates hundreds of tons of contaminated copper cable, which are sent to radioactive waste disposal sites. The Copper Cable Recycling Technology separates the clean copper from contaminated insulation and dust materials in these cables. The recovered copper can then be reclaimed and, more importantly, landfill disposal volumes can be reduced. The existing baseline technology for disposing radioactively contaminated cables is to package the cables in wooden storage boxes and dispose of the cables in radioactive waste disposal sites. The Copper Cable Recycling Technology is applicable to facility decommissioning projects at many Department of Energy (DOE) nuclear facilities and commercial nuclear power plants undergoing decommissioning activities. The INEEL Copper Cable Recycling Technology Demonstration investigated the effectiveness and efficiency to recycle 13.5 tons of copper cable. To determine the effectiveness

  5. Chemistry Technology

    Data.gov (United States)

    Federal Laboratory Consortium — Chemistry technology experts at NCATS engage in a variety of innovative translational research activities, including:Design of bioactive small molecules.Development...

  6. Technology diffusion and growth

    OpenAIRE

    Erzo G. J. Luttmer

    2009-01-01

    Suppose firms are subject to decreasing returns and permanent idiosyncratic productivity shocks. Suppose also firms can only stay in business by continuously paying a fixed cost. New firms can enter. Firms with a history of relatively good productivity shocks tend to survive and others are forced to exit. This paper identifies assumptions about entry that guarantee a stationary firm size distribution and lead to balanced growth. The range of technology diffusion mechanisms that can be conside...

  7. DARPA Emerging Technologies

    Science.gov (United States)

    2016-01-01

    significant technical challenges due to extreme temperatures and thermal loadings and complex aerody- namic effects, they also potentially enjoy...Already, full-spectrum search and track limits the util- ity of our stealth platforms. As the never-ending, cat-and-mouse game between attackers and...development requires wind tunnels and ranges that do not currently exist. Furthermore, continued technology matura- tion is needed for thermal management

  8. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    1999-10-31

    The Deactivation and Decommissioning (D&D) Technology Assessment Program (TAP) was developed to provide detailed, comparable data for environmental technologies and to disseminate this data to D&D professionals in a manner that will facilitate the review and selection of technologies to perform decontamination and decommissioning. The objectives for this project include the following: Determine technology needs through review of the Site Technology Coordination Group (STCG) information and other applicable websites and needs databases; Perform a detailed review of industries that perform similar activities as those required in D&D operations to identify additional technologies; Define the technology assessment program for characterization and waste management problem sets; Define the data management program for characterization, dismantlement, and waste management problem sets; Evaluate baseline and innovative technologies under standard test conditions at Florida International University's Hemispheric Center for Environmental Technology (FIU-HCET) and other locations and collect data in the areas of performance, cost, health and safety, operations and maintenance, and primary and secondary waste generation; Continue to locate, verify, and incorporate technology performance data from other sources into the multimedia information system; and Develop the conceptual design for a dismantlement technology decision analysis tool for dismantlement technologies.

  9. Continuous culture apparatus and methodology

    International Nuclear Information System (INIS)

    Conway, H.L.

    1975-01-01

    At present, we are investigating the sorption of potentially toxic trace elements by phytoplankton under controlled laboratory conditions. Continuous culture techniques were used to study the mechanism of the sorption of the trace elements by unialgal diatom populations and the factors influencing this sorption. Continuous culture methodology has been used extensively to study bacterial kinetics. It is an excellent technique for obtaining a known physiological state of phytoplankton populations. An automated method for the synthesis of continuous culture medium for use in these experiments is described

  10. The ethics of assessing health technologies

    NARCIS (Netherlands)

    Wilt, G.J. van der; Reuzel, R.; Banta, H.D.

    2000-01-01

    Health technology assessment (HTA) consists of the systematic study of the consequences of the introduction or continued use of the technology in a particular context, with the explicit objective to arrive at a judgment of the value or merit of the technology. Ideally, it is aimed at assessing all

  11. Technological learning in the energy sector

    NARCIS (Netherlands)

    Junginger, H.M.; Lako, P.; Lensink, S.; van Sark, W.G.J.H.M.; Weiss, M.

    2008-01-01

    Technology learning is a key driver behind the improvement of (energy) technologies available to mankind and subsequent reduction of production costs. Many of the conventional technologies in use today have already been continuously improved over decades, sometimes even a century. In contrast, many

  12. Marginalized Student Access to Technology Education

    Science.gov (United States)

    Kurtcu, Wanda M.

    2017-01-01

    The purpose of this paper is to investigate how a teacher can disrupt an established curriculum that continues the cycle of inequity of access to science, technology, engineering, and math (STEM) curriculum by students in alternative education. For this paper, I will focus on the technology components of the STEM curriculum. Technology in the…

  13. [Update in continuous renal replacement techniques].

    Science.gov (United States)

    Romero-García, M; de la Cueva-Ariza, L; Delgado-Hito, P

    2013-01-01

    Acute renal failure affects 25% of patients hospitalized in intensive care units. Despite technological advances, the mortality of these patients is still high due to its associated complications. Continuous renal replacement techniques are one of the treatments for acute renal failure because they make it possible to treat the complications and decrease mortality. The nurse's knowledge and skills regarding these techniques will be decisive for the success of the therapy. Consequently, the nurse's experience and training are key components. The objective of this article is to update the knowledge on continuous renal replacement techniques. Keeping this in mind, a review has been made of the physical and chemical principles such as diffusion and convection, among others. A description of the different continuous renal replacement techniques, a presentation of the main vascular access, and a description of the nursing cares and complications related to techniques used have also been provided. Copyright © 2012 Elsevier España, S.L. y SEEIUC. All rights reserved.

  14. Information technology resources assessment

    Energy Technology Data Exchange (ETDEWEB)

    Stevens, D.F. [ed.

    1992-01-01

    This year`s Information Technology Resources Assessment (ITRA) is something of a departure from traditional practice. Past assessments have concentrated on developments in fundamental technology, particularly with respect to hardware. They form an impressive chronicle of decreasing cycle times, increasing densities, decreasing costs (or, equivalently, increasing capacity and capability per dollar spent), and new system architectures, with a leavening of operating systems and languages. Past assessments have aimed -- and succeeded -- at putting information technology squarely in the spotlight; by contrast, in the first part of this assessment, we would like to move it to the background, and encourage the reader to reflect less on the continuing technological miracles of miniaturization in space and time and more on the second- and third-order implications of some possible workplace applications of these miracles. This Information Technology Resources Assessment is intended to provide a sense of technological direction for planners in projecting the hardware, software, and human resources necessary to support the diverse IT requirements of the various components of the DOE community. It is also intended to provide a sense of our new understanding of the place of IT in our organizations.

  15. Information technology resources assessment

    Energy Technology Data Exchange (ETDEWEB)

    Stevens, D.F. (ed.)

    1992-01-01

    This year's Information Technology Resources Assessment (ITRA) is something of a departure from traditional practice. Past assessments have concentrated on developments in fundamental technology, particularly with respect to hardware. They form an impressive chronicle of decreasing cycle times, increasing densities, decreasing costs (or, equivalently, increasing capacity and capability per dollar spent), and new system architectures, with a leavening of operating systems and languages. Past assessments have aimed -- and succeeded -- at putting information technology squarely in the spotlight; by contrast, in the first part of this assessment, we would like to move it to the background, and encourage the reader to reflect less on the continuing technological miracles of miniaturization in space and time and more on the second- and third-order implications of some possible workplace applications of these miracles. This Information Technology Resources Assessment is intended to provide a sense of technological direction for planners in projecting the hardware, software, and human resources necessary to support the diverse IT requirements of the various components of the DOE community. It is also intended to provide a sense of our new understanding of the place of IT in our organizations.

  16. Technology Catalogue

    International Nuclear Information System (INIS)

    1994-02-01

    The Department of Energy's Office of Environmental Restoration and Waste Management (EM) is responsible for remediating its contaminated sites and managing its waste inventory in a safe and efficient manner. EM's Office of Technology Development (OTD) supports applied research and demonstration efforts to develop and transfer innovative, cost-effective technologies to its site clean-up and waste management programs within EM's Office of Environmental Restoration and Office of Waste Management. The purpose of the Technology Catalogue is to provide performance data on OTD-developed technologies to scientists and engineers assessing and recommending technical solutions within the Department's clean-up and waste management programs, as well as to industry, other federal and state agencies, and the academic community. OTD's applied research and demonstration activities are conducted in programs referred to as Integrated Demonstrations (IDs) and Integrated Programs (IPs). The IDs test and evaluate.systems, consisting of coupled technologies, at specific sites to address generic problems, such as the sensing, treatment, and disposal of buried waste containers. The IPs support applied research activities in specific applications areas, such as in situ remediation, efficient separations processes, and site characterization. The Technology Catalogue is a means for communicating the status. of the development of these innovative technologies. The FY93 Technology Catalogue features technologies successfully demonstrated in the field through IDs and sufficiently mature to be used in the near-term. Technologies from the following IDs are featured in the FY93 Technology Catalogue: Buried Waste ID (Idaho National Engineering Laboratory, Idaho); Mixed Waste Landfill ID (Sandia National Laboratories, New Mexico); Underground Storage Tank ID (Hanford, Washington); Volatile organic compound (VOC) Arid ID (Richland, Washington); and VOC Non-Arid ID (Savannah River Site, South Carolina)

  17. Continuous Delivery and Quality Monitoring

    CERN Multimedia

    CERN. Geneva

    2016-01-01

    After introducing Continuous Delivery, I will switch the topic and try to answer the question how much should we invest in quality and how to do it efficiently. My observations reveal that software quality is often considered as the slo...

  18. Asymmetric reactions in continuous flow

    Directory of Open Access Journals (Sweden)

    Xiao Yin Mak

    2009-04-01

    Full Text Available An overview of asymmetric synthesis in continuous flow and microreactors is presented in this review. Applications of homogeneous and heterogeneous asymmetric catalysis as well as biocatalysis in flow are discussed.

  19. Confidentiality | Benatar | Continuing Medical Education

    African Journals Online (AJOL)

    Continuing Medical Education. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 21, No 1 (2003) >. Log in or Register to get access to full text downloads.

  20. Continuation of superpave projects monitoring.

    Science.gov (United States)

    2011-07-01

    This study involved the continuous monitoring of material properties and field performance of twelve Superpave project sections in Florida for the establishment of reasonable and effective mixture design guidelines and criteria, the identification an...

  1. Continuing education and professional development

    International Nuclear Information System (INIS)

    Adams, Edwina

    2002-01-01

    The success of a profession will be determined upon its education and training. A profession is required to encompass: a core body of knowledge; a set of ethical codes of practice; and have practitioners with humanistic qualities. In order to maintain the success of a profession it is necessary to have continuing education, which enhances professional development. Continuing professional education includes a form of self-regulation, which ensures the maintenance of a minimum standard of practice in this ever-changing workplace, and by regulating this standard, the discipline becomes more accountable to the client and the profession as a whole. In Australia, the Nuclear Medicine society's continuing education programs and Universities offering postgraduate programs promote continuing education. If technologists are to successfully keep up with developments in instrumentation, protocols and changing health care requirements, we must ensure that the education of practitioners does not cease at certification of entry to the workplace (Au)

  2. Manipulating continuous variable photonic entanglement

    International Nuclear Information System (INIS)

    Plenio, M.B.

    2005-01-01

    I will review our work on photonic entanglement in the continuous variable regime including both Gaussian and non-Gaussian states. The feasibility and efficiency of various entanglement purification protocols are discussed this context. (author)

  3. Thermally activated technologies: Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2003-05-01

    The purpose of this Technology Roadmap is to outline a set of actions for government and industry to develop thermally activated technologies for converting America’s wasted heat resources into a reservoir of pollution-free energy for electric power, heating, cooling, refrigeration, and humidity control. Fuel flexibility is important. The actions also cover thermally activated technologies that use fossil fuels, biomass, and ultimately hydrogen, along with waste heat.

  4. Technological Advancements

    Science.gov (United States)

    Kennedy, Mike

    2010-01-01

    The influx of technology has brought significant improvements to school facilities. Many of those advancements can be found in classrooms, but when students head down the hall to use the washrooms, they are likely to find a host of technological innovations that have improved conditions in that part of the building. This article describes modern…

  5. Maritime Technology

    DEFF Research Database (Denmark)

    Sørensen, Herman

    1997-01-01

    Elementary introduction to the subject "Maritime Technology".The contents include drawings, sketches and references in English without any supplementary text.......Elementary introduction to the subject "Maritime Technology".The contents include drawings, sketches and references in English without any supplementary text....

  6. Continuous-Energy Data Checks

    Energy Technology Data Exchange (ETDEWEB)

    Haeck, Wim [Radioprotection and Nuclear Safety Institute, Fontenay-aux-Roses (France); Conlin, Jeremy Lloyd [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); McCartney, Austin Paul [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Parsons, Donald Kent [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-05-25

    The purpose of this report is to provide an overview of all Quality Assurance tests that have to be performed on a nuclear data set to be transformed into an ACE formatted nuclear data file. The ACE file is capable of containing different types of data such as continuous energy neutron data, thermal scattering data, etc. Within this report, we will limit ourselves to continuous energy neutron data.

  7. Fusion technology programme

    International Nuclear Information System (INIS)

    Finken, D.

    1984-10-01

    The KfK-Association has continued work on 17 R and D contracts of the Fusion Technology Programme. An effort of 94 manyears per year is at present contributed by 10 KfK departments, covering all aereas defined in the Fusion Technology Programme. The dominant part of the work is directed towards the need of the NET design or supporting experiments. Some additional effort addresses long term technological issues and system studies relevant to DEMO or confinement schemes alternative to tokamaks. Direct contribution to the NET team has increased by augmentation of NET study contracts and delegation of personnel, three KfK delegates being at present members of the NET team. In reverse, specifications and design guidelines worked out by NET have started to have an impact on the current R and D-work in the laboratory. (orig./GG)

  8. Prospects for Accelerator Technology

    Science.gov (United States)

    Todd, Alan

    2011-02-01

    Accelerator technology today is a greater than US$5 billion per annum business. Development of higher-performance technology with improved reliability that delivers reduced system size and life cycle cost is expected to significantly increase the total accelerator technology market and open up new application sales. Potential future directions are identified and pitfalls in new market penetration are considered. Both of the present big market segments, medical radiation therapy units and semiconductor ion implanters, are approaching the "maturity" phase of their product cycles, where incremental development rather than paradigm shifts is the norm, but they should continue to dominate commercial sales for some time. It is anticipated that large discovery-science accelerators will continue to provide a specialty market beset by the unpredictable cycles resulting from the scale of the projects themselves, coupled with external political and economic drivers. Although fraught with differing market entry difficulties, the security and environmental markets, together with new, as yet unrealized, industrial material processing applications, are expected to provide the bulk of future commercial accelerator technology growth.

  9. Progress of Pharmaceutical Continuous Crystallization

    Directory of Open Access Journals (Sweden)

    Dejiang Zhang

    2017-06-01

    Full Text Available Crystallization is an important unit operation in the pharmaceutical industry. At present, most pharmaceutical crystallization processes are performed in batches. However, due to product variability from batch to batch and to the low productivity of batch crystallization, continuous crystallization is gaining increasing attention. In the past few years, progress has been made to allow the products of continuous crystallization to meet different requirements. This review summarizes the progress in pharmaceutical continuous crystallization from a product engineering perspective. The advantages and disadvantages of different types of continuous crystallization are compared, with the main difference between the two main types of crystallizers being their difference in residence time distribution. Approaches that use continuous crystallization to meet different quality requirements are summarized. Continuous crystallization has advantages in terms of size and morphology control. However, it also has the problem of a process yield that may be lower than that of a batch process, especially in the production of chirality crystals. Finally, different control strategies are compared.

  10. Continuous-variable supraquantum nonlocality

    Science.gov (United States)

    Ketterer, Andreas; Laversanne-Finot, Adrien; Aolita, Leandro

    2018-01-01

    Supraquantum nonlocality refers to correlations that are more nonlocal than allowed by quantum theory but still physically conceivable in postquantum theories, in the sense of respecting the basic no-faster-than-light communication principle. While supraquantum correlations are relatively well understood for finite-dimensional systems, little is known in the infinite-dimensional case. Here, we study supraquantum nonlocality for bipartite systems with two measurement settings and infinitely many outcomes per subsystem. We develop a formalism for generic no-signaling black-box measurement devices with continuous outputs in terms of probability measures, instead of probability distributions, which involves a few technical subtleties. We show the existence of a class of supraquantum Gaussian correlations, which violate the Tsirelson bound of an adequate continuous-variable Bell inequality. We then introduce the continuous-variable version of the celebrated Popescu-Rohrlich (PR) boxes, as a limiting case of the above-mentioned Gaussian ones. Finally, we characterize the geometry of the set of continuous-variable no-signaling correlations. Namely, we show that that the convex hull of the continuous-variable PR boxes is dense in the no-signaling set. We also show that these boxes are extreme in the set of no-signaling behaviors and provide evidence suggesting that they are indeed the only extreme points of the no-signaling set. Our results lay the grounds for studying generalized-probability theories in continuous-variable systems.

  11. President’s Message: Advancing the TIDE of Technology Education

    OpenAIRE

    Lipton, Ethan B.

    2005-01-01

    The article presents information relating to the field of technology education. Vigorous change continues in the study of technology and the delivery of technology education because of the integrating nature of technology and the need to prepare students for developing technological world to meet changing human needs. Significant strides have been made in the evolution of technology education of which we should all be very proud. In the last decade alone, the International Technology Educatio...

  12. Technology collaboration

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Jacob [Halliburton (Brazil)

    2011-07-01

    The aim of this paper is to present Halliburton's Brazilian technology center. Halliburton has technology centers in the United States, Saudi Arabia, India, Singapore and Brazil, all of which aim at delivering accelerated innovation in the oil sector. The technology centers engage in research and development activities with the help of various universities and in collaboration with the customer or supplier. The Halliburton Brazil technology center provides its customers with timely research and development solutions for enhancing recovery and mitigating reservoir uncertainty; they are specialized in finding solutions for pre- and post-salt carbonate drilling and in the enhancement of production from mature fields. This presentation showcased the work carried out by the Halliburton Brazil technology center to help customers develop their deepwater field activities.

  13. Sensemaking technology

    DEFF Research Database (Denmark)

    Madsen, Charlotte Øland

    Research objective: The object of the LOK research project is to gain a better understanding of the technological strategic processes in organisations by using the concept/metaphor of sensemaking. The project will investigate the technological strategies in organisations in order to gain a deeper...... understanding of the cognitive competencies and barriers towards implementing new technology in organisations. The research will therefore concentrate on researching the development process in the organisation's perception of the external environmental elements of customers, suppliers, competitors, internal...... and external technology and legislation and the internal environmental elements of structure, power relations and political arenas. All of these variables have influence on which/how technologies are implemented thus creating different outcomes all depending on the social dynamics that are triggered by changes...

  14. Psychology, technology, and diabetes management.

    Science.gov (United States)

    Gonder-Frederick, Linda A; Shepard, Jaclyn A; Grabman, Jesse H; Ritterband, Lee M

    2016-10-01

    Use of technology in diabetes management is rapidly advancing and has the potential to help individuals with diabetes achieve optimal glycemic control. Over the past 40 years, several devices have been developed and refined, including the blood glucose meter, insulin pump, and continuous glucose monitor. When used in tandem, the insulin pump and continuous glucose monitor have prompted the Artificial Pancreas initiative, aimed at developing control system for fully automating glucose monitoring and insulin delivery. In addition to devices, modern technology, such as the Internet and mobile phone applications, have been used to promote patient education, support, and intervention to address the behavioral and emotional challenges of diabetes management. These state-of-the-art technologies not only have the potential to improve clinical outcomes, but there are possible psychological benefits, such as improved quality of life, as well. However, practical and psychosocial limitations related to advanced technology exist and, in the context of several technology-related theoretical frameworks, can influence patient adoption and continued use. It is essential for future diabetes technology research to address these barriers given that the clinical benefits appear to largely depend on patient engagement and consistence of technology use. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  15. Business continuity 2014: From traditional to integrated Business Continuity Management.

    Science.gov (United States)

    Ee, Henry

    As global change continues to generate new challenges and potential threats to businesses, traditional business continuity management (BCM) slowly reveals its limitations and weak points to ensuring 'business resiliency' today. Consequently, BCM professionals also face the challenge of re-evaluating traditional concepts and introducing new strategies and industry best practices. This paper points to why traditional BCM is no longer sufficient in terms of enabling businesses to survive in today's high-risk environment. It also looks into some of the misconceptions about BCM and other stumbling blocks to establishing effective BCM today. Most importantly, however, this paper provides tips based on the Business Continuity Institute's (BCI) Good Practices Guideline (GPG) and the latest international BCM standard ISO 22301 on how to overcome the issues and challenges presented.

  16. Control Systems Engineering in Continuous Pharmaceutical Manufacturing May 20-21, 2014 Continuous Manufacturing Symposium.

    Science.gov (United States)

    Myerson, Allan S; Krumme, Markus; Nasr, Moheb; Thomas, Hayden; Braatz, Richard D

    2015-03-01

    This white paper provides a perspective of the challenges, research needs, and future directions for control systems engineering in continuous pharmaceutical processing. The main motivation for writing this paper is to facilitate the development and deployment of control systems technologies so as to ensure quality of the drug product. Although the main focus is on small-molecule pharmaceutical products, most of the same statements apply to biological drug products. An introduction to continuous manufacturing and control systems is followed by a discussion of the current status and technical needs in process monitoring and control, systems integration, and risk analysis. Some key points are that: (1) the desired objective in continuous manufacturing should be the satisfaction of all critical quality attributes (CQAs), not for all variables to operate at steady-state values; (2) the design of start-up and shutdown procedures can significantly affect the economic operation of a continuous manufacturing process; (3) the traceability of material as it moves through the manufacturing facility is an important consideration that can at least in part be addressed using residence time distributions; and (4) the control systems technologies must assure quality in the presence of disturbances, dynamics, uncertainties, nonlinearities, and constraints. Direct measurement, first-principles and empirical model-based predictions, and design space approaches are described for ensuring that CQA specifications are met. Ways are discussed for universities, regulatory bodies, and industry to facilitate working around or through barriers to the development of control systems engineering technologies for continuous drug manufacturing. Industry and regulatory bodies should work with federal agencies to create federal funding mechanisms to attract faculty to this area. Universities should hire faculty interested in developing first-principles models and control systems technologies for

  17. Control systems engineering in continuous pharmaceutical manufacturing. May 20-21, 2014 Continuous Manufacturing Symposium.

    Science.gov (United States)

    Myerson, Allan S; Krumme, Markus; Nasr, Moheb; Thomas, Hayden; Braatz, Richard D

    2015-03-01

    This white paper provides a perspective of the challenges, research needs, and future directions for control systems engineering in continuous pharmaceutical processing. The main motivation for writing this paper is to facilitate the development and deployment of control systems technologies so as to ensure quality of the drug product. Although the main focus is on small-molecule pharmaceutical products, most of the same statements apply to biological drug products. An introduction to continuous manufacturing and control systems is followed by a discussion of the current status and technical needs in process monitoring and control, systems integration, and risk analysis. Some key points are that: (1) the desired objective in continuous manufacturing should be the satisfaction of all critical quality attributes (CQAs), not for all variables to operate at steady-state values; (2) the design of start-up and shutdown procedures can significantly affect the economic operation of a continuous manufacturing process; (3) the traceability of material as it moves through the manufacturing facility is an important consideration that can at least in part be addressed using residence time distributions; and (4) the control systems technologies must assure quality in the presence of disturbances, dynamics, uncertainties, nonlinearities, and constraints. Direct measurement, first-principles and empirical model-based predictions, and design space approaches are described for ensuring that CQA specifications are met. Ways are discussed for universities, regulatory bodies, and industry to facilitate working around or through barriers to the development of control systems engineering technologies for continuous drug manufacturing. Industry and regulatory bodies should work with federal agencies to create federal funding mechanisms to attract faculty to this area. Universities should hire faculty interested in developing first-principles models and control systems technologies for

  18. A Dynamic Continuation-Passing Style for Dynamic Delimited Continuations

    DEFF Research Database (Denmark)

    Biernacki, Dariusz; Danvy, Olivier; Millikin, Kevin Scott

    2005-01-01

    We present a new abstract machine that accounts for dynamic delimited continuations. We prove the correctness of this new abstract machine with respect to a pre-existing, definitional abstract machine. Unlike this definitional abstract machine, the new abstract machine is in defunctionalized form......-passing style.' We show that the new machine operates more efficiently than the definitional one and that the notion of computation induced by the corresponding evaluator takes the form of a monad. We also present new examples and a new simulation of dynamic delimited continuations in terms of static ones....

  19. Ergonomics technology

    Science.gov (United States)

    Jones, W. L.

    1977-01-01

    Major areas of research and development in ergonomics technology for space environments are discussed. Attention is given to possible applications of the technology developed by NASA in industrial settings. A group of mass spectrometers for gas analysis capable of fully automatic operation has been developed for atmosphere control on spacecraft; a version for industrial use has been constructed. Advances have been made in personal cooling technology, remote monitoring of medical information, and aerosol particle control. Experience gained by NASA during the design and development of portable life support units has recently been applied to improve breathing equipment used by fire fighters.

  20. Continuous carbon nanotube reinforced composites.

    Science.gov (United States)

    Ci, L; Suhr, J; Pushparaj, V; Zhang, X; Ajayan, P M

    2008-09-01

    Carbon nanotubes are considered short fibers, and polymer composites with nanotube fillers are always analogues of random, short fiber composites. The real structural carbon fiber composites, on the other hand, always contain carbon fiber reinforcements where fibers run continuously through the composite matrix. With the recent optimization in aligned nanotube growth, samples of nanotubes in macroscopic lengths have become available, and this allows the creation of composites that are similar to the continuous fiber composites with individual nanotubes running continuously through the composite body. This allows the proper utilization of the extreme high modulus and strength predicted for nanotubes in structural composites. Here, we fabricate such continuous nanotube polymer composites with continuous nanotube reinforcements and report that under compressive loadings, the nanotube composites can generate more than an order of magnitude improvement in the longitudinal modulus (up to 3,300%) as well as damping capability (up to 2,100%). It is also observed that composites with a random distribution of nanotubes of same length and similar filler fraction provide three times less effective reinforcement in composites.

  1. Current Status of Concentrator Photovoltaic (CPV) Technology

    Energy Technology Data Exchange (ETDEWEB)

    Philipps, Simon P. [Fraunhofer Inst. for Solar Energy Systems ISE, Freiburg (Germany); Bett, Andreas W. [Fraunhofer Inst. for Solar Energy Systems ISE, Freiburg (Germany); Horowitz, Kelsey [National Renewable Energy Lab. (NREL), Golden, CO (United States); Kurtz, Sarah [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-12-01

    This report summarizes the status of the concentrator photovoltaic (CPV) market and industry as well as current trends in research and technology. This report is intended to guide research agendas for Fraunhofer ISE, the National Renewable Energy Laboratory (NREL), and other R&D organizations. Version 1.1 of this report includes recent progress in CPV. The recent record module efficiency of 38.9% at Concentrator Standard Test Conditions (CSTC) is an impressive result, demonstrating the continuing opportunity for CPV technology to improve. 38.9% at Concentrator Standard Test Conditions (CSTC) is an impressive result, demonstrating the continuing opportunity for CPV technology to improve. 38.9% at Concentrator Standard Test Conditions (CSTC) is an impressive result, demonstrating the continuing opportunity for CPV technology to improve. 38.9% at Concentrator Standard Test Conditions (CSTC) is an impressive result, demonstrating the continuing opportunity for CPV technology to improve.

  2. Dialysis (Part 1): Continuous ambulatory peritoneal dialysis (continuing education credit).

    Science.gov (United States)

    Macdonald, J

    1997-02-19

    The first of two articles on dialysis outlines the experience of patients from chronic renal failure to end stage renal failure and offers a historical perspective of continuous ambulatory peritoneal dialysis (CAPD). It relates to UKCC Professional Development categories: Care enhancement and Reducing risk.

  3. Promoting Continuous Quality Improvement in Online Teaching: The META Model

    Science.gov (United States)

    Dittmar, Eileen; McCracken, Holly

    2012-01-01

    Experienced e-learning faculty members share strategies for implementing a comprehensive postsecondary faculty development program essential to continuous improvement of instructional skills. The high-impact META Model (centered around Mentoring, Engagement, Technology, and Assessment) promotes information sharing and content creation, and fosters…

  4. The Continuity Project. Spring/Summer 1998 Report.

    Science.gov (United States)

    Wasilko, Peter J.

    The Continuity Project is a research, development, and technology transfer initiative aimed at creating a Library of the Future by combining features of an online public access catalog (OPAC) and a campuswide information system (CWIS) with advanced facilities drawn from such areas as artificial intelligence (AI), knowledge representation (KR),…

  5. Continuous Glucose Monitoring and Global Reimbursement: An Update.

    Science.gov (United States)

    Graham, Claudia

    2017-06-01

    Real-time continuous glucose monitoring has been available for a decade and reimbursement for the technology has been slowly growing. Reasons for the various rates of reimbursement and adoption are explored in this article and the status of country-wide reimbursement is discussed.

  6. Continuous Improvement in Schools and Districts: Policy Considerations

    Science.gov (United States)

    Best, Jane; Dunlap, Allison

    2014-01-01

    Discussions about improving public education often focus on outcomes without considering how schools and districts can accomplish those outcomes. Research shows that using a continuous improvement process has proven successful in healthcare, manufacturing, and technology, and may hold potential for use in education as well. This brief defines and…

  7. Closing the Loop on a Continuous Program Improvement Process

    Science.gov (United States)

    Booth, Vickie; Booth, Larry

    2010-01-01

    The WebBSIT, a Bachelor of Science in Information Technology, is a fully online degree offered through a consortium of five University System of Georgia institutions. This paper begins by summarizing the change management system developed for continuous program improvement. Analysis of data should drive improvement, closing the loop. The balance…

  8. Analysis of the quality renovated continuous steel casting roller

    Indian Academy of Sciences (India)

    S¯adhan¯a Vol. 38, Part 3, June 2013, pp. 477–490. c Indian Academy of Sciences. Analysis of the quality renovated continuous steel casting roller. J VI ˇNÁŠ. ∗ ... Department of Technology and Materials, Faculty of Mechanical Engineering, .... Mentioned line is able to produce slabs with section of 190–250 mm × 960–.

  9. Use of sodium salt electrolysis in the process of continuous ...

    Indian Academy of Sciences (India)

    This paper presents test results concerning the selection of sodium salt for the technology of continuous modification of the EN AC-AlSi12 alloy, which is based on electrolysis of sodium salts, occurring directly in a crucible with liquid alloy. Sodium ions formed as a result of the sodium salt dissociation and the electrolysis are ...

  10. What Drives Nurses' Blended e-Learning Continuance Intention?

    Science.gov (United States)

    Cheng, Yung-Ming

    2014-01-01

    This study's purpose was to synthesize the user network (including subjective norm and network externality), task-technology fit (TTF), and expectation-confirmation model (ECM) to explain nurses' intention to continue using the blended electronic learning (e-learning) system within medical institutions. A total of 450 questionnaires were…

  11. Analysis of the quality renovated continuous steel casting roller

    Indian Academy of Sciences (India)

    Abstract. This paper presents the possibility of restoration of worn contact sur- faces of rollers for continuous casting of steel. Permanent effort of steel producers to extend the lifespan of these components requires the implementation of new filler materials or modifying technological renovation processes to reduce the ...

  12. Continuous lactation in dairy cows

    DEFF Research Database (Denmark)

    Madsen, Torben Gosvig; Nielsen, Mette Benedicte Olaf; Andersen, Jens Bech

    2008-01-01

    function may be achievable in continuously milked high-yielding dairy cows as a result of the genetic selection for lactation performance and hence longevity of mammary epithelial cells. The milk production and mammary nutrient uptake in response to omission of the dry period for cows with an expected peak...... milk yield higher than 45 kg/d were studied in 28 Holstein dairy cows managed without bovine somatotropin. Performance and metabolic parameters were followed in late gestation and in the following early lactation. Fourteen cows were milked continuously throughout late gestation, and another 14 dairy...... cows experienced a 7-wk prepartum dry period. Continuous milking during the prepartum period reduced milk production in the following early lactation period by >20%. The reduced milk production could not be readily ascribed to inefficiency of the mechanisms responsible for nutrient uptake...

  13. Clarence Ayres, technology, pragmatism and progress

    OpenAIRE

    Anne Mayhew

    2010-01-01

    This paper explores the origins and continued relevance of Clarence Ayres' definition of technology as a process involving both physical tools and a scientific method of reasoning, where science is understood to achieve cross-cultural explanatory power by virtue of technological validation. Ayres' concept of technology derived from his training as a Pragmatist and was primarily philosophical rather than descriptive, but is congruent with the work of modern historians of technology and remains...

  14. Technology Innovation

    Science.gov (United States)

    EPA produces innovative technologies and facilitates their creation in line with the Agency mission to create products such as the stormwater calculator, remote sensing, innovation clusters, and low-cost air sensors.

  15. Videodisc technology

    Energy Technology Data Exchange (ETDEWEB)

    Marsh, F.E. Jr.

    1981-03-01

    An overview of the technology of videodiscs is given. The emphasis is on systems that use reflection or transmission of laser light. Possible use of videodiscs for storage of bibliographic information is considered. 6 figures, 3 tables. (RWR)

  16. Technology | FNLCR

    Science.gov (United States)

    The Frederick National Laboratory develops and applies advanced, next-generation technologies to solve basic and applied problems in the biomedical sciences, and serves as a national resource of shared high-tech facilities.

  17. Globalization & technology

    DEFF Research Database (Denmark)

    Narula, Rajneesh

    of innovation" understanding of learning. Narula and Smith reconcile an important paradox. On the one hand, locations and firms are increasingly interdependent through supranational organisations, regional integration, strategic alliances, and the flow of investments, technologies, ideas and people......Technology and globalization are interdependent processes. Globalization has a fundamental influence on the creation and diffusion of technology, which, in turn, affects the interdependence of firms and locations. This volume examines the international aspect of this interdependence at two levels....... The boundaries of firms and countries are increasingly porous and imprecise, because firms use alliances and outsourcing, and countries are rarely technologically self-sufficient. On the other hand, locations remain distinct and idiosyncratic, with innovation systems remaining largely nationally bound. Knowledge...

  18. Plasma technology

    International Nuclear Information System (INIS)

    Drouet, M.G.

    1984-03-01

    IREQ was contracted by the Canadian Electrical Association to review plasma technology and assess the potential for application of this technology in Canada. A team of experts in the various aspects of this technology was assembled and each team member was asked to contribute to this report on the applications of plasma pertinent to his or her particular field of expertise. The following areas were examined in detail: iron, steel and strategic-metals production; surface treatment by spraying; welding and cutting; chemical processing; drying; and low-temperature treatment. A large market for the penetration of electricity has been identified. To build up confidence in the technology, support should be provided for selected R and D projects, plasma torch demonstrations at full power, and large-scale plasma process testing

  19. Exploration technology

    Energy Technology Data Exchange (ETDEWEB)

    Roennevik, H.C. [Saga Petroleum A/S, Forus (Norway)

    1996-12-31

    The paper evaluates exploration technology. Topics discussed are: Visions; the subsurface challenge; the creative tension; the exploration process; seismic; geology; organic geochemistry; seismic resolution; integration; drilling; value creation. 4 refs., 22 figs.

  20. Pascal's wager: combining continuous glucose monitoring and continuous subcutaneous insulin infusion.

    Science.gov (United States)

    Kerr, David; Olateju, Tolu

    2010-06-01

    Pascal's Wager is a suggestion posed by the French Philosopher, Blaise Pascal, that even though the existence of God cannot be determined through reason, a person should wager that God exists because he or she has everything to gain and nothing to lose. In the area of consideration here, the optimum experimental trial of the combined use of continuous subcutaneous insulin infusion and real-time continuous glucose monitoring in free-living individuals with type 1 diabetes providing rock-solid evidence of clinical benefit has not been performed. Nevertheless, there is considerable enthusiasm for combining the technologies among healthcare professionals, patients, and manufacturers based on the belief that this approach to diabetes care must be beneficial beyond the available evidence (i.e., reason).

  1. For Time-Continuous Optimisation

    DEFF Research Database (Denmark)

    Heinrich, Mary Katherine; Ayres, Phil

    2016-01-01

    Strategies for optimisation in design normatively assume an artefact end-point, disallowing continuous architecture that engages living systems, dynamic behaviour, and complex systems. In our Flora Robotica investigations of symbiotic plant-robot bio-hybrids, we re- quire computational tools...... and strategies that help us evaluate designed behaviours, rather than discrete ‘things’. In this paper, we present our strategy of using embodied interaction to facilitate engagement with a scenario’s full scope of possible states and their continuous changes over time. We detail the ways in which this approach...

  2. Continuous-variable quantum games

    International Nuclear Information System (INIS)

    Li Hui; Du Jiangfeng; Massar, Serge

    2002-01-01

    We investigate the quantization of games in which the players can access to a continuous set of classical strategies, making use of continuous-variable quantum systems. For the particular case of the Cournot's duopoly, we find that, even though the two players both act as 'selfishly' in the quantum game as they do in the classical game, they are found to virtually cooperate due to the quantum entanglement between them. We also find that the original Einstein-Podolksy-Rosen state contributes to the best profits that the two firms could ever attain. Moreover, we propose a practical experimental setup for the implementation of such quantum games

  3. Transmutation Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Song, T. Y.; Park, W. S.; Kim, Y. H. (and others)

    2007-06-15

    The spent fuel coming from the PWR is one of the most difficult problems to be solved for the continuous use of nuclear power. It takes a few million years to be safe under the ground. Therefore, it is not easy to take care of the spent fuel for such a long time. Transmutation technology is the key technology which can solve the spent fuel problem basically. Transmutation is to transmute long-lived radioactive nuclides in the spent fuel into short-lived or stable nuclide through nuclear reactions. The long-lived radioactive nuclides can be TRU and fission products such as Tc-99 and I-129. Although the transmutation technology does not make the underground disposal totally unnecessary, the period to take care of the spent fuel can be reduced to the order of a few hundred years. In addition to the environmental benefit, transmutation can be considered to recycle the energy in the spent fuel since the transmutation is performed through nuclear fission reaction of the TRU in the spent fuel. Therefore, transmutation technology is worth being developed in economical aspect. The results of this work can be a basis for the next stage research. The objective of the third stage research was to complete the core conceptual design and verification of the key technologies. The final results will contribute to the establishment of Korean back end fuel cycle policy by providing technical guidelines.

  4. Lasers technology

    International Nuclear Information System (INIS)

    2014-01-01

    The Laser Technology Program of IPEN is developed by the Center for Lasers and Applications (CLA) and is committed to the development of new lasers based on the research of new optical materials and new resonator technologies. Laser applications and research occur within several areas such as Nuclear, Medicine, Dentistry, Industry, Environment and Advanced Research. Additional goals of the Program are human resource development and innovation, in association with Brazilian Universities and commercial partners

  5. Cognitive technologies

    CERN Document Server

    Mello, Alan; Figueiredo, Fabrício; Figueiredo, Rafael

    2017-01-01

    This book focuses on the next generation optical networks as well as mobile communication technologies. The reader will find chapters on Cognitive Optical Network, 5G Cognitive Wireless, LTE, Data Analysis and Natural Language Processing. It also presents a comprehensive view of the enhancements and requirements foreseen for Machine Type Communication. Moreover, some data analysis techniques and Brazilian Portuguese natural language processing technologies are also described here. .

  6. Continuous Variables Quantum Information in Noisy Environments

    DEFF Research Database (Denmark)

    Berni, Adriano

    The technological progress of the last few decades has brought us the ability of exploiting quantum effects to accomplish a variety of relevant tasks. Yet, quantum phenomena are fragile, and with the ability to engineer quantum information protocols comes the problem of keeping such information...... safe from the detrimental effects of noise and losses. In the present work we investigate continuous variables Gaussian quantum information in noisy environments, studying the effects of various noise sources in the cases of a quantum metrological task, an error correction scheme and discord......-type correlations. We engage each of the topics from a theoretical point of view, successively delving into the details of the experimental realizations and concluding with a survey of the results. In particular, we present experimental implementation of an ab initio, deterministic, real-time adaptive phase...

  7. Electronic health records: postadoption physician satisfaction and continued use.

    Science.gov (United States)

    Wright, Edward; Marvel, Jon

    2012-01-01

    One goal of public-policy makers in general and health care managers in particular is the adoption and efficient utilization of electronic health record (EHR) systems throughout the health care industry. Consequently, this investigation focused on the effects of known antecedents of technology adoption on physician satisfaction with EHR technology and the continued use of such systems. The American Academy of Family Physicians provided support in the survey of 453 physicians regarding their satisfaction with their EHR use experience. A conceptual model merging technology adoption and computer user satisfaction models was tested using structural equation modeling. Results indicate that effort expectancy (ease of use) has the most substantive effect on physician satisfaction and the continued use of EHR systems. As such, health care managers should be especially sensitive to the user and computer interface of prospective EHR systems to avoid costly and disruptive system selection mistakes.

  8. VIRTUAL INTERNSHIP AS AN EFFECTIVE RESOURCE OF CONTINUOUS PEDAGOGICAL EDUCATION

    Directory of Open Access Journals (Sweden)

    М П Нечаев

    2016-12-01

    Full Text Available In the article the necessity of introduction of new effective forms and technologies to support continuous professional growth of teachers. Emphasizes the role of virtual internships as an effective resource in the organization of system of continuous pedagogical education based on the development of professional reflection of the teacher. Noted that the organization of virtual internships will allow teachers to build on the scientific basis of the technology of following tasks: formation of motivation of teachers to continuously improve their professional skills; developing the ability to analyze educational experience of their colleagues; the development of the ability to analyze the pedagogical experience through the prism of analysis of the “alien” experience; develop the ability to see your “strong” and “weak” parties in a professional way, to determine the cause of professional difficulties, to identify internal resources to build individual trajectory of their professional development.

  9. Technology Specialisation 1, 2 & 3 Compendium

    DEFF Research Database (Denmark)

    Tambo, Torben; Koch, Christian; Hansen, Hans Henrik

    2010-01-01

    and progressive move forward inspired by the spirit of engineering. This compendium gives broad information on many aspects of the Technology Specialisation project courses relating to aim, method, mentor company roles, individual versus group performance, scientific motivation and many other issues. The content......Within the Master of Science in Technology-based Business Development study program, Technology Specialisations are the recurring technological stronghold. The Technology Specialisations should hold the students focus on the technological platform of this program and ideally constitute a continuous...

  10. Distributed synthesis in continuous time

    DEFF Research Database (Denmark)

    Hermanns, Holger; Krčál, Jan; Vester, Steen

    2016-01-01

    We introduce a formalism modelling communication of distributed agents strictly in continuous-time. Within this framework, we study the problem of synthesising local strategies for individual agents such that a specified set of goal states is reached, or reached with at least a given probability...

  11. Reimbursement for Continuous Glucose Monitoring

    NARCIS (Netherlands)

    Heinemann, Lutz; DeVries, J. Hans

    2016-01-01

    Continuous glucose monitoring (CGM) systems have been available for more than 15 years by now. However, market uptake is relatively low in most countries; in other words, relatively few patients with diabetes use CGM systems regularly. One major reason for the reluctance of patients to use CGM

  12. Geodesic continued fractions and LLL

    NARCIS (Netherlands)

    Beukers, F

    2014-01-01

    We discuss a proposal for a continued fraction-like algorithm to determine simultaneous rational approximations to dd real numbers α1,…,αdα1,…,αd. It combines an algorithm of Hermite and Lagarias with ideas from LLL-reduction. We dynamically LLL-reduce a quadratic form with parameter tt as t↓0t↓0.

  13. Continuous supersonic plasma wind tunnel

    DEFF Research Database (Denmark)

    Andersen, S.A.; Jensen, Vagn Orla; Nielsen, P.

    1969-01-01

    The normal magnetic field configuration of a Q device has been modified to obtain a 'magnetic Laval nozzle'. Continuous supersonic plasma 'winds' are obtained with Mach numbers ~3. The magnetic nozzle appears well suited for the study of the interaction of supersonic plasma 'winds' with either...

  14. Reliability of CHAMP Anomaly Continuations

    Science.gov (United States)

    vonFrese, Ralph R. B.; Kim, Hyung Rae; Taylor, Patrick T.; Asgharzadeh, Mohammad F.

    2003-01-01

    CHAMP is recording state-of-the-art magnetic and gravity field observations at altitudes ranging over roughly 300 - 550 km. However, anomaly continuation is severely limited by the non-uniqueness of the process and satellite anomaly errors. Indeed, our numerical anomaly simulations from satellite to airborne altitudes show that effective downward continuations of the CHAMP data are restricted to within approximately 50 km of the observation altitudes while upward continuations can be effective over a somewhat larger altitude range. The great unreliability of downward continuation requires that the satellite geopotential observations must be analyzed at satellite altitudes if the anomaly details are to be exploited most fully. Given current anomaly error levels, joint inversion of satellite and near- surface anomalies is the best approach for implementing satellite geopotential observations for subsurface studies. We demonstrate the power of this approach using a crustal model constrained by joint inversions of near-surface and satellite magnetic and gravity observations for Maude Rise, Antarctica, in the southwestern Indian Ocean. Our modeling suggests that the dominant satellite altitude magnetic anomalies are produced by crustal thickness variations and remanent magnetization of the normal polarity Cretaceous Quiet Zone.

  15. Teamwork, Leadership, and Continuous Improvement

    NARCIS (Netherlands)

    Keijser, Wouter Alexander; Glaudemans, Andor; Medema, Jitze; Dierckx, Rudi; Ahaus, Kees

    2017-01-01

    In this chapter, we describe the enhanced TeamSTEPPS® curriculum as fundament to creating a “culture of continuous improvement” in nuclear medicine. This evidence-based and modular teamwork system is deployed in concordance with a novel medical leadership development program. It provides a

  16. Marketing Continuing Education for Nurses.

    Science.gov (United States)

    Southern Regional Education Board, Atlanta, GA.

    This guide presents an overview of marketing and its potential value in continuing education programs for nurses. The first portion of the guide briefly discusses the concept of marketing. It contains definitions of key marketing concepts (product, place, price, and promotion), discussion of the basic tenets of marketing (consumer needs…

  17. Sustaining motivation for continuous improvement

    DEFF Research Database (Denmark)

    Jørgensen, Frances; Kofoed, Lise Busk

    2007-01-01

    The objective of this article is to explore possibilities for improving motivation for participation in Continuous Improvement (CI). Due to a number of issues, for example, challenges with measuring outcomes of CI activities on performance, the inherent slower, incremental rather than big bang...

  18. In the interest of continuity

    CERN Multimedia

    Association du personnel

    2009-01-01

    Every five years a new Management takes over the fifth floor of the Main Building. The arrival of a new Director-General comes with a desire to change the managerial style. Whilst not contesting the current need for this, we would like to remind you that continuity in the Organization is ensured by the personnel and its Staff Association representatives.

  19. Wide-area continuous offender monitoring

    Science.gov (United States)

    Hoshen, Joseph; Drake, George; Spencer, Debra D.

    1997-02-01

    The corrections system in the U.S. is supervising over five million offenders. This number is rising fast and so are the direct and indirect costs to society. To improve supervision and reduce the cost of parole and probation, first generation home arrest systems were introduced in 1987. While these systems proved to be helpful to the corrections system, their scope is rather limited because they only cover an offender at a single location and provide only a partial time coverage. To correct the limitations of first- generation systems, second-generation wide area continuous electronic offender monitoring systems, designed to monitor the offender at all times and locations, are now on the drawing board. These systems use radio frequency location technology to track the position of offenders. The challenge for this technology is the development of reliable personal locator devices that are small, lightweight, with long operational battery life, and indoors/outdoors accuracy of 100 meters or less. At the center of a second-generation system is a database that specifies the offender's home, workplace, commute, and time the offender should be found in each. The database could also define areas from which the offender is excluded. To test compliance, the system would compare the observed coordinates of the offender with the stored location for a given time interval. Database logfiles will also enable law enforcement to determine if a monitored offender was present at a crime scene and thus include or exclude the offender as a potential suspect.

  20. [Glycemic variability and continuous monitoring of glycemia].

    Science.gov (United States)

    Prázný, Martin; Soupal, Jan

    2014-09-01

    Blood glucose levels are not constant in ther human body even in physiological status. It fluctuates depending on food intake, exercise, psychological and other factors. Normally it fluctuates between 3.9 to 7.5 mmol/l and in fasting in the standard conditions it does not exceed even more narrow range 3.9 to 5.5 mmol/l. Fluctuations are more pronounced in patient with diabetes. Hyperglycemia is a common and basic pathology in diabetes, however, antidiabetic drug often cause hypoglycemia, both increasing the range for glucose fluctuations. The level of glucose fluctuation is called glycemic variability (GV). Glycemic variability is now a favorite target of scientific research in dia-betology. Increased glycemic variability is associated with hypoglycemia, possibly may contribute to chronic dia-betes complications and negatively influences quality of life of diabetic patients. Last but not least, thanks to the new technology of continuous glucose monitoring, we can better describe and measure it. Finally, glycemic variability emerges as a potentially important therapeutical target.Key words: continuous glucose monitoring - glycemic variability - insulin pump - sensor augmented pump.

  1. Continuous positive airway pressure therapy: new generations.

    LENUS (Irish Health Repository)

    Garvey, John F

    2012-02-01

    Continuous positive airway pressure (CPAP) is the treatment of choice for obstructive sleep apnoea syndrome (OSAS). However, CPAP is not tolerated by all patients with OSAS and alternative modes of pressure delivery have been developed to overcome pressure intolerance, thereby improving patient comfort and adherence. Auto-adjustable positive airway pressure (APAP) devices may be utilised for the long-term management of OSAS and may also assist in the initial diagnosis of OSAS and titration of conventional CPAP therapy. Newer modalities such as C-Flex and A-Flex also show promise as treatment options in the future. However, the evidence supporting the use of these alternative modalities remains scant, in particular with regard to long-term cardiovascular outcomes. In addition, not all APAP devices use the same technological algorithms and data supporting individual APAP devices cannot be extrapolated to support all. Further studies are required to validate the roles of APAP, C-Flex and A-Flex. In the interim, standard CPAP therapy should continue as the mainstay of OSAS management.

  2. A computer-aided continuous assessment system

    Directory of Open Access Journals (Sweden)

    B. C.H. Turton

    1996-12-01

    Full Text Available Universities within the United Kingdom have had to cope with a massive expansion in undergraduate student numbers over the last five years (Committee of Scottish University Principals, 1993; CVCP Briefing Note, 1994. In addition, there has been a move towards modularization and a closer monitoring of a student's progress throughout the year. Since the price/performance ratio of computer systems has continued to improve, Computer- Assisted Learning (CAL has become an attractive option. (Fry, 1990; Benford et al, 1994; Laurillard et al, 1994. To this end, the Universities Funding Council (UFQ has funded the Teaching and Learning Technology Programme (TLTP. However universities also have a duty to assess as well as to teach. This paper describes a Computer-Aided Assessment (CAA system capable of assisting in grading students and providing feedback. In this particular case, a continuously assessed course (Low-Level Languages of over 100 students is considered. Typically, three man-days are required to mark one assessed piece of coursework from the students in this class. Any feedback on how the questions were dealt with by the student are of necessity brief. Most of the feedback is provided in a tutorial session that covers the pitfalls encountered by the majority of the students.

  3. Continuous positive airway pressure therapy: new generations.

    LENUS (Irish Health Repository)

    Garvey, John F

    2010-02-01

    Continuous positive airway pressure (CPAP) is the treatment of choice for obstructive sleep apnoea syndrome (OSAS). However, CPAP is not tolerated by all patients with OSAS and alternative modes of pressure delivery have been developed to overcome pressure intolerance, thereby improving patient comfort and adherence. Auto-adjustable positive airway pressure (APAP) devices may be utilised for the long-term management of OSAS and may also assist in the initial diagnosis of OSAS and titration of conventional CPAP therapy. Newer modalities such as C-Flex and A-Flex also show promise as treatment options in the future. However, the evidence supporting the use of these alternative modalities remains scant, in particular with regard to long-term cardiovascular outcomes. In addition, not all APAP devices use the same technological algorithms and data supporting individual APAP devices cannot be extrapolated to support all. Further studies are required to validate the roles of APAP, C-Flex and A-Flex. In the interim, standard CPAP therapy should continue as the mainstay of OSAS management.

  4. Continuing professional development and ICT: target practice.

    Science.gov (United States)

    Eaton, K A; Reynolds, P A

    2008-07-26

    Ever-increasing needs and demands by dentists and all other members of the dental team for education and training at all levels - undergraduate, postgraduate and continuing - are straining the resources of existing providers of such education. At the same time, there are ever-increasing opportunities to develop online delivery and the use of a range of information and communication technology (ICT) systems and services further, in all aspects of dental education. This paper reviews recent developments that have led to an increased demand for dental postgraduate programmes and continuing professional development (CPD) courses in the United Kingdom and then discusses how ICT has and will impact on teaching practice. Examples include the use of teaching and learning resources in a virtual learning environment (VLE) and the increasing use of blended learning. The paper then explores the need for both teachers and students to adapt to the new environment to ensure they can benefit to the maximum and that teaching and learning practices are changed accordingly.

  5. Teaching With(out) Technology: Secondary English Teachers and Classroom Technology Use

    Science.gov (United States)

    Flanagan, Sara; Shoffner, Melanie

    2013-01-01

    Technology plays an integral role in the English Language Arts (ELA) classroom today, yet teachers and teacher educators continue to develop understandings of how technology influences pedagogy. This qualitative study explored how and why two ELA teachers used different technologies in the secondary English classroom to plan for and deliver…

  6. Development of a Virtual Technology Coach to Support Technology Integration for K-12 Educators

    Science.gov (United States)

    Sugar, William; van Tryon, Patricia J. Slagter

    2014-01-01

    In an effort to develop a virtual technology coach for K-12 educators, this article analyzed survey results from sixty teachers with regards to specific resources that a technology coach could provide within a virtual environment. A virtual technology coach was proposed as a possible solution to provide continual professional development for…

  7. Independent Assessment of Technology Characterizations to Support the Biomass Program Annual State-of-Technology Assessments

    Energy Technology Data Exchange (ETDEWEB)

    Yeh, B.

    2011-03-01

    This report discusses an investigation that addressed two thermochemical conversion pathways for the production of liquid fuels and addressed the steps to the process, the technology providers, a method for determining the state of technology and a tool to continuously assess the state of technology. This report summarizes the findings of the investigation as well as recommendations for improvements for future studies.

  8. Environmental science and technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-07-01

    The Program on Environmental Science and Technology developed at the Chemical and Environmental Technology Center comprehends environmental chemistry (water, soil and atmospheric chemistry), clean technologies (desulfurization of diesel and oil, biodegradable polymers and structural modification of polymers, recycling, pyrolysis of dangerous chemicals by molten salt technology), nanotechnology (magnetic nanoparticles, dendrimers, nano biomarkers, catalysts) and chemical characterization of nuclear fuel and nuclear fuel cycle waste (chemical and isotopic characterization). The Chemical and Environmental Technology Center was established in 1995, as an evolution of the former Department of Chemistry Engineering (1970). The program on environment science and technology was structured as consequence of the continuous growth of environmental activities on areas related to nuclear programs of IPEN. Moreover, it was an answer to the society concerning the climate changes and biodiversity preservation. All activities of research and development, services, supervision of graduate and under graduated students and courses performance at the center were related to the development, improvement and establishment of new technologies. The highlights of this period (2011 - 2013) were: - Development and use of modern analytical technology for the characterization of persistent pollutants and endocrine disrupters (metals, PAHA’s, PCBs, Pesticides, hormones, surfactants, plasticizer and human pharmaceuticals) in order to evaluate water quality and/or sediments; - Atmospheric chemistry and greenhouse gases: Evaluating an estimation of surface trace gas fluxes from aircraft measurements above the Amazon; - Cooperation with SABESP (Water and Sewage Company) and CETESB (State Environment Agency) in program for the development of public policies; - Studies and development in biodegradable polymers, polyolefins and advanced methods for polymer and rubber recycling and re-use; - Studies

  9. Environmental science and technology

    International Nuclear Information System (INIS)

    2014-01-01

    The Program on Environmental Science and Technology developed at the Chemical and Environmental Technology Center comprehends environmental chemistry (water, soil and atmospheric chemistry), clean technologies (desulfurization of diesel and oil, biodegradable polymers and structural modification of polymers, recycling, pyrolysis of dangerous chemicals by molten salt technology), nanotechnology (magnetic nanoparticles, dendrimers, nano biomarkers, catalysts) and chemical characterization of nuclear fuel and nuclear fuel cycle waste (chemical and isotopic characterization). The Chemical and Environmental Technology Center was established in 1995, as an evolution of the former Department of Chemistry Engineering (1970). The program on environment science and technology was structured as consequence of the continuous growth of environmental activities on areas related to nuclear programs of IPEN. Moreover, it was an answer to the society concerning the climate changes and biodiversity preservation. All activities of research and development, services, supervision of graduate and under graduated students and courses performance at the center were related to the development, improvement and establishment of new technologies. The highlights of this period (2011 - 2013) were: - Development and use of modern analytical technology for the characterization of persistent pollutants and endocrine disrupters (metals, PAHA’s, PCBs, Pesticides, hormones, surfactants, plasticizer and human pharmaceuticals) in order to evaluate water quality and/or sediments; - Atmospheric chemistry and greenhouse gases: Evaluating an estimation of surface trace gas fluxes from aircraft measurements above the Amazon; - Cooperation with SABESP (Water and Sewage Company) and CETESB (State Environment Agency) in program for the development of public policies; - Studies and development in biodegradable polymers, polyolefins and advanced methods for polymer and rubber recycling and re-use; - Studies

  10. Cooperative technology development: An approach to advancing energy technology

    International Nuclear Information System (INIS)

    Stern, T.

    1989-09-01

    Technology development requires an enormous financial investment over a long period of time. Scarce national and corporate resources, the result of highly competitive markets, decreased profit margins, wide currency fluctuations, and growing debt, often preclude continuous development of energy technology by single entities, i.e., corporations, institutions, or nations. Although the energy needs of the developed world are generally being met by existing institutions, it is becoming increasingly clear that existing capital formation and technology transfer structures have failed to aid developing nations in meeting their growing electricity needs. This paper will describe a method for meeting the electricity needs of the developing world through technology transfer and international cooperative technology development. The role of nuclear power and the advanced passive plant design will be discussed. (author)

  11. Mobile devices tools and technologies

    CERN Document Server

    Collins, Lauren

    2015-01-01

    Mobile Devices: Tools and Technologies provides readers with an understanding of the mobile landscape available to app developers, system and network engineers, and the avid techie. As the trend of mobile technology has enabled the continuous development of ubiquitous applications, this book offers insights into tools and technologies critical to evaluating and implementing mobile strategies.The book is organized into four parts of 18 contributed chapters written by engineers in the areas of application and database development, mobile enterprise strategy, and networking and security. Througho

  12. Technological inductive power transfer systems

    Science.gov (United States)

    Madzharov, Nikolay D.; Nemkov, Valentin S.

    2017-05-01

    Inductive power transfer is a very fast expanding technology with multiple design principles and practical implementations ranging from charging phones and computers to bionic systems, car chargers and continuous power transfer in technological lines. Only a group of devices working in near magnetic field is considered. This article is devoted to overview of different inductive power transfer (IPT) devices. The review of literature in this area showed that industrial IPT are not much discussed and examined. The authors have experience in design and implementation of several types of IPTs belonging to wireless automotive chargers and to industrial application group. Main attention in the article is paid to principles and design of technological IPTs

  13. A Patent Analysis for Sustainable Technology Management

    Directory of Open Access Journals (Sweden)

    Junhyeog Choi

    2016-07-01

    Full Text Available Technology analysis (TA is an important issue in the management of technology. Most R&D (Research & Development policies have depended on diverse TA results. Traditional TA results have been obtained through qualitative approaches such as the Delphi expert survey, scenario analysis, or technology road mapping. Although they are representative methods for TA, they are not stable because their results are dependent on the experts’ knowledge and subjective experience. To solve this problem, recently many studies on TA have been focused on quantitative approaches, such as patent analysis. A patent document has diverse information of developed technologies, and thus, patent is one form of objective data for TA. In addition, sustainable technology has been a big issue in the TA fields, because most companies have their technological competitiveness through the sustainable technology. Sustainable technology is a technology keeping the technological superiority of a company. So a country as well as a company should consider sustainable technology for technological competition and continuous economic growth. Also it is important to manage sustainable technology in a given technology domain. In this paper, we propose a new patent analysis approach based on statistical analysis for the management of sustainable technology (MOST. Our proposed methodology for the MOST is to extract a technological structure and relationship for knowing the sustainable technology. To do this, we develop a hierarchical diagram of technology for finding the causal relationships among technological keywords of a given domain. The aim of the paper is to select the sustainable technology and to create the hierarchical technology paths to sustainable technology for the MOST. This contributes to planning R&D strategy for the sustainability of a company. To show how the methodology can be applied to real problem, we perform a case study using retrieved patent documents related to

  14. Persuasive Technology

    DEFF Research Database (Denmark)

    This book constitutes the proceedings of the 5th International Conference on Persuasive Technology, PERSUASIVE 2010, held in Copenhagen Denmark in June 2010. The 25 papers presented were carefully reviewed and selected from 80 submissions. In addition three keynote papers are included in this vol......This book constitutes the proceedings of the 5th International Conference on Persuasive Technology, PERSUASIVE 2010, held in Copenhagen Denmark in June 2010. The 25 papers presented were carefully reviewed and selected from 80 submissions. In addition three keynote papers are included...... in this volume. The topics covered are emotions and user experience, ambient persuasive systems, persuasive design, persuasion profiles, designing for health, psychology of persuasion, embodied and conversational agents, economic incentives, and future directions for persuasive technology....

  15. Seafood Technology

    DEFF Research Database (Denmark)

    Børresen, Torger

    This presentation will fill the total picture of this conference between fisheries and aquaculture, blue biotech and bioconservation, by considering the optimal processing technology of marine resources from the raw material until the seafood reaches the plate of the consumer. The situation today...... must be performed such that total traceability and authenticity of the final products can be presented on demand. The most important aspects to be considered within seafood technology today are safety, healthy products and high eating quality. Safety can be divided into microbiological safety...... and not presenting any safety risk per se. Seafood is healthy due to the omega-3 fatty acids and the nutritional value of vitamins, peptides and proteins. The processing technology must however be performed such that these valuable features are not lost during production. The same applies to the eating quality. Any...

  16. Smart technology

    International Nuclear Information System (INIS)

    Bruckner, D.G.

    1991-01-01

    The success of smart technology in the pursuit of the Gulf War has accentuated the awareness of how the Safeguards and Security disciplines are changing in response to new weaponry. Throughout the Department of Energy Integrated Complex (IC) Safeguards and Security efforts such as: Protection Programs Operations; Materials, Controls and Accountability; Information Security; Computer Security; Operational Security; Personnel Security, Safeguards and/or Security (S and S) surveys, and Inspections and Evaluations are undergoing a reassessment and refocusing. Some of this is in response to such things as the DOE initiated Freeze Report and the Drell Report. An important aspect is also technological, adjusting the way business is done in light of the weapons, tools and processes/procedures becoming available. This paper addresses the S and S issues with the promise of using smart technology to develop new approaches and equipment across the IC

  17. Equipment and Analytical Companies Meeting Continuous Challenges May 20-21 2014 Continuous Manufacturing Symposium.

    Science.gov (United States)

    Page, Trevor; Dubina, Henry; Fillipi, Gabriele; Guidat, Roland; Patnaik, Saroj; Poechlauer, Peter; Shering, Phil; Guinn, Martin; Mcdonnell, Peter; Johnston, Craig

    2015-03-01

    This white paper focuses on equipment, and analytical manufacturers' perspectives, regarding the challenges of continuous pharmaceutical manufacturing across five prompt questions. In addition to valued input from several vendors, commentary was provided from experienced pharmaceutical representatives, who have installed various continuous platforms. Additionally, a small medium enterprise (SME) perspective was obtained through interviews. A range of technical challenges is outlined, including: the presence of particles, equipment scalability, fouling (and cleaning), technology derisking, specific analytical challenges, and the general requirement of improved technical training. Equipment and analytical companies can make a significant contribution to help the introduction of continuous technology. A key point is that many of these challenges exist in batch processing and are not specific to continuous processing. Backward compatibility of software is not a continuous issue per se. In many cases, there is available learning from other industries. Business models and opportunities through outsourced development partners are also highlighted. Agile smaller companies and academic groups have a key role to play in developing skills, working collaboratively in partnerships, and focusing on solving relevant industry challenges. The precompetitive space differs for vendor companies compared with large pharmaceuticals. Currently, there is no strong consensus around a dominant continuous design, partly because of business dynamics and commercial interests. A more structured common approach to process design and hardware and software standardization would be beneficial, with initial practical steps in modeling. Conclusions include a digestible systems approach, accessible and published business cases, and increased user, academic, and supplier collaboration. This mirrors US FDA direction. The concept of silos in pharmaceutical companies is a common theme throughout the white

  18. Equipment and analytical companies meeting continuous challenges. May 20-21, 2014 Continuous Manufacturing Symposium.

    Science.gov (United States)

    Page, Trevor; Dubina, Henry; Fillipi, Gabriele; Guidat, Roland; Patnaik, Saroj; Poechlauer, Peter; Shering, Phil; Guinn, Martin; Mcdonnell, Peter; Johnston, Craig

    2015-03-01

    This white paper focuses on equipment, and analytical manufacturers' perspectives, regarding the challenges of continuous pharmaceutical manufacturing across five prompt questions. In addition to valued input from several vendors, commentary was provided from experienced pharmaceutical representatives, who have installed various continuous platforms. Additionally, a small medium enterprise (SME) perspective was obtained through interviews. A range of technical challenges is outlined, including: the presence of particles, equipment scalability, fouling (and cleaning), technology derisking, specific analytical challenges, and the general requirement of improved technical training. Equipment and analytical companies can make a significant contribution to help the introduction of continuous technology. A key point is that many of these challenges exist in batch processing and are not specific to continuous processing. Backward compatibility of software is not a continuous issue per se. In many cases, there is available learning from other industries. Business models and opportunities through outsourced development partners are also highlighted. Agile smaller companies and academic groups have a key role to play in developing skills, working collaboratively in partnerships, and focusing on solving relevant industry challenges. The precompetitive space differs for vendor companies compared with large pharmaceuticals. Currently, there is no strong consensus around a dominant continuous design, partly because of business dynamics and commercial interests. A more structured common approach to process design and hardware and software standardization would be beneficial, with initial practical steps in modeling. Conclusions include a digestible systems approach, accessible and published business cases, and increased user, academic, and supplier collaboration. This mirrors US FDA direction. The concept of silos in pharmaceutical companies is a common theme throughout the white

  19. State of the Science in Technology Transfer: At the Confluence of Academic Research and Business Development--Merging Technology Transfer with Knowledge Translation to Deliver Value

    Science.gov (United States)

    Lane, Joseph P.

    2010-01-01

    The practice of technology transfer continues to evolve into a discipline. Efforts continue in the field of assistive technology (AT) to move technology-related prototypes, resulting from development in the academic sector, to product commercialization within the business sector. The article describes how technology transfer can be linked to…

  20. Technology Transfer

    Science.gov (United States)

    Smith, Nanette R.

    1995-01-01

    The objective of this summer's work was to attempt to enhance Technology Application Group (TAG) ability to measure the outcomes of its efforts to transfer NASA technology. By reviewing existing literature, by explaining the economic principles involved in evaluating the economic impact of technology transfer, and by investigating the LaRC processes our William & Mary team has been able to lead this important discussion. In reviewing the existing literature, we identified many of the metrics that are currently being used in the area of technology transfer. Learning about the LaRC technology transfer processes and the metrics currently used to track the transfer process enabled us to compare other R&D facilities to LaRC. We discuss and diagram impacts of technology transfer in the short run and the long run. Significantly, it serves as the basis for analysis and provides guidance in thinking about what the measurement objectives ought to be. By focusing on the SBIR Program, valuable information regarding the strengths and weaknesses of this LaRC program are to be gained. A survey was developed to ask probing questions regarding SBIR contractors' experience with the program. Specifically we are interested in finding out whether the SBIR Program is accomplishing its mission, if the SBIR companies are providing the needed innovations specified by NASA and to what extent those innovations have led to commercial success. We also developed a survey to ask COTR's, who are NASA employees acting as technical advisors to the SBIR contractors, the same type of questions, evaluating the successes and problems with the SBIR Program as they see it. This survey was developed to be implemented interactively on computer. It is our hope that the statistical and econometric studies that can be done on the data collected from all of these sources will provide insight regarding the direction to take in developing systematic evaluations of programs like the SBIR Program so that they can

  1. Analytic continuation in perturbative QCD

    International Nuclear Information System (INIS)

    Caprini, Irinel

    2002-01-01

    We discuss some attempts to improve standard perturbative expansion in QCD by using the analytic continuation in the momentum and the Borel complex planes. We first analyse the momentum-plane analyticity properties of the Borel-summed Green functions in perturbative QCD and the connection between the Landau singularities and the infrared renormalons. By using the analytic continuation in the Borel complex plane, we propose a new perturbative series replacing the standard expansion in powers of the normalized coupling constant a. The new expansion functions have branch point and essential singularities at the origin of the complex a-plane and divergent Taylor expansions in powers of a. On the other hand the modified expansion of the QCD correlators is convergent under rather conservative conditions. (author)

  2. Dimensional continuation in field theory

    International Nuclear Information System (INIS)

    Lee, T.

    1988-01-01

    The continuation of space-time dimension to an arbitrary complex number is discussed. The ultra-violet and infra-red divergences are simply regularized by analytically continuing to some proper dimension n. Combined with functional integral quantization, it provides a simple and elegant description of quantum field theory. Two well known field theories are discussed. Scalar field theory and quantum electrodynamics. In the scalar theory, the focus is on the operator product expansion. It is showed that a renormalization scheme (minimal subtraction) clearly defines the operator product expansion. In the quantum electrodynamics, it is shown that BRS symmetry can simplify the renormalization process. Composite operators are the renormalized and renormalized stress-energy tensor is formed

  3. Nasal continuous positive airway pressure

    DEFF Research Database (Denmark)

    Scholze, Alexandra; Lamwers, Stephanie; Tepel, Martin

    2012-01-01

    Obstructive sleep apnoea (OSA) is linked to increased cardiovascular risk. This risk can be reduced by nasal continuous positive airway pressure (nCPAP) treatment. As OSA is associated with an increase of several vasoconstrictive factors, we investigated whether nCPAP influences the digital volume...... pulse wave. We performed digital photoplethysmography during sleep at night in 94 consecutive patients who underwent polysomnography and 29 patients treated with nCPAP. Digital volume pulse waves were obtained independently of an investigator and were quantified using an algorithm for continuous.......01; n = 94) and the arousal index (Spearman correlation, r = 0.21; p CPAP treatment, the AHI was significantly reduced from 27 ± 3 events · h(-1) to 4 ± 2 events · h(-1) (each n = 29; p

  4. Continuous coking of heavy feedstocks

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, Douglas W. [Lidcon, Inc (United States)

    2011-07-01

    A new process for continuous coking and decoking has been developed by Lidcon Inc. This process uses bitumen, vacuum tower residues, or a heavy CCR stock. The Lidcon process produces a higher liquid yield and lowers solid coke production. It also reduces the effects on the environment by lowering the amount of utilities that are needed to power the unit, while improving fire and worker safety. The reactor also produces coke continuously. The theoretical advantage of such a reactor configuration is that it has a short high temperature residence time for volatiles while improving the mass transfer of volatiles through the residue. The dimensions of the reactor are approximately 28' long with a 7' diameter. The weight of the unit is 20,000lbs. The Lidcon process can deliver a higher level of efficiency while reducing the amount of coke that is produced.

  5. Continuous-Variable Entanglement Swapping

    Directory of Open Access Journals (Sweden)

    Kevin Marshall

    2015-05-01

    Full Text Available We present a very brief overview of entanglement swapping as it relates to continuous-variable quantum information. The technical background required is discussed and the natural link to quantum teleportation is established before discussing the nature of Gaussian entanglement swapping. The limitations of Gaussian swapping are introduced, along with the general applications of swapping in the context of to quantum communication and entanglement distribution. In light of this, we briefly summarize a collection of entanglement swapping schemes which incorporate a non-Gaussian ingredient and the benefits of such schemes are noted. Finally, we motivate the need to further study and develop such schemes by highlighting requirements of a continuous-variable repeater.

  6. Technology applications

    Science.gov (United States)

    Anuskiewicz, T.; Johnston, J.; Leavitt, W.; Zimmerman, R. R.

    1972-01-01

    A summary of NASA Technology Utilization programs for the period of 1 December 1971 through 31 May 1972 is presented. An abbreviated description of the overall Technology Utilization Applications Program is provided as a background for the specific applications examples. Subjects discussed are in the broad headings of: (1) cancer, (2) cardiovascular disease, (2) medical instrumentation, (4) urinary system disorders, (5) rehabilitation medicine, (6) air and water pollution, (7) housing and urban construction, (8) fire safety, (9) law enforcement and criminalistics, (10) transportation, and (11) mine safety.

  7. Architectural technology

    DEFF Research Database (Denmark)

    2005-01-01

    The booklet offers an overall introduction to the Institute of Architectural Technology and its projects and activities, and an invitation to the reader to contact the institute or the individual researcher for further information. The research, which takes place at the Institute of Architectural...... Technology at the Roayl Danish Academy of Fine Arts, School of Architecture, reflects a spread between strategic, goal-oriented pilot projects, commissioned by a ministry, a fund or a private company, and on the other hand projects which originate from strong personal interests and enthusiasm of individual...

  8. REMOTE TRAINING AND CONTINUING EDUCATION

    Directory of Open Access Journals (Sweden)

    Alexander E. Petrov

    2013-01-01

    Full Text Available In this paper we consider two trends in teaching methods and tools chosen on the base of continuing education concept and challenges of the information society. Indeed, the modern post-school education requires improved efficiency and activity of training as it should or can be combined with productive activity of students. Here we discuss and analyze some trends of contemporary distance learning in order to include them into solution of lifelong learning problems. 

  9. Continuous monitoring of gaseous effluents

    International Nuclear Information System (INIS)

    Velasco, A.; Giraut, H.; Prado, M.; Bonino, A.D.

    1990-01-01

    The system allows to continuously determine the radioactive materials discharge (iodine, noble gases and aerosols) to the environment. It consists in compelling, by a pump, a known and fixed fraction of the total flow and preserving the aerosols by a filter. The gas -now free from aerosols- traverses an activated carbon filter which keeps the iodine; after being free from aerosols and iodine, the effluent traverses a measurement chambers for noble gases which has a scintillator. (Author) [es

  10. Continuous-Tone Electrostatic Electrography

    Science.gov (United States)

    1949-06-15

    Chief j Engineering « Technical Div., SIGTM-S... Office >o:t the; Chief S/ignal Officer, Washington 2ß, D, C. ^.Technical Reports Libr ; Fort...the metal backing plate?. With this arrangement* a continuous electrical current, was Observed to flow through the selenium film as. long as. it...electrode would also accept a charge under the corona -discharge, wires. This charge could be • dissipated by ah exposure to light in a. manner similar to

  11. Climate Change and Requirement of Transfer of Environmentally Sound Technology

    OpenAIRE

    Uddin, Mahatab

    2011-01-01

    Technology and policy play a twofold role in international environmental laws. Stronger environmental policies encourage new green technologies and likewise, better technologies make it easier to regulate. “Technology transfer” refers to the transfer from one party, an association or institution that developed the technology, to another that adopts, adapts, and uses it. As different kinds of threats posed by climate change are continuously increasing all over the world the issue of “technolog...

  12. Technological development in fisheries management

    DEFF Research Database (Denmark)

    Eigaard, Ole Ritzau; Marchal, Paul; Gislason, Henrik

    2014-01-01

    Many marine fish stocks are overexploited and considerable overcapacity exists in fishing fleets worldwide. One of the reasons for the imbalance between resource availability and fishing capacity is technological development, which continuously increases the efficiency of the vessels—a mechanism...... referred to as “technological creep.” We review how the introduction of new and more efficient electronic equipment, gear design, engines, deck equipment, and catch-handling procedures influences the capture efficiency (catchability) of commercial fishing vessels. On average, we estimate that catchability...... increases by 3.2% per year due to technological developments, an increase often ignored in fisheries management. The documentation and quantification of technological creep improves the basis for successfully integrating the effects of technological development (and catchability changes) in fisheries...

  13. A Taxonomy of Information Technology-Enhanced Pricing Strategies

    NARCIS (Netherlands)

    Dixit, A.; Whipple, T.W.; Zinkhan, G.M.; Gailey, E.

    2008-01-01

    As a result of evolving technology, opportunities for innovative pricing strategies continuously emerge. The authors provide an updated taxonomy to show how such emerging strategies relate to recent technological advances. Specifically, they cite increased availability of information, enhanced

  14. Review and evaluation of alternative chemical disposal technologies

    National Research Council Canada - National Science Library

    National Research Council Staff; Commission on Engineering and Technical Systems; Division on Engineering and Physical Sciences; National Research Council; National Academy of Sciences

    ... in comparison to the Army's baseline incineration system. The volume's main finding was that no alternative technology was preferable to incineration but that work should continue on the neutralization technologies under Army consideration...

  15. Protection of continued economic existence and major changes. 1. paper

    International Nuclear Information System (INIS)

    Backherms, J.

    1980-01-01

    On the issue of protecting continued economic existence according to Sect. 18 of the Atomic Energy Law, a difference is made between changes occurring in the environment of the plant, in the existing knowledge in science and technology, and changes occurring in the safety philosophy held by the authorities. In case of conditions being subsequently imposed because of a change in the existing knowledge in science and technology, the liability of the authorities to pay compensation is ruled out according to Sect. 18, para. 2 No. 3 of the Atomic Energy Law. The difference made between a change in the safety philosophy held by the authorities and a change in the existing knowledge in science and technology seems to be obvious. In the first case it is a matter of changing the legal evaluation of unchanged technological findings, in the legal evaluation, however, the licence granted has to have a lasting effect on principle. (HP) [de

  16. Technology Transfer: Marketing Tomorrow's Technology

    Science.gov (United States)

    Tcheng, Erene

    1995-01-01

    The globalization of the economy and the end of the Cold War have triggered many changes in the traditional practices of U.S. industry. To effectively apply the resources available to the United States, the federal government has firmly advocated a policy of technology transfer between private industry and government labs, in this case the National Aeronautics and Space Administration (NASA). NASA Administrator Daniel Goldin is a strong proponent of this policy and has organized technology transfer or commercialization programs at each of the NASA field centers. Here at Langley Research Center, the Technology Applications Group (TAG) is responsible for facilitating the transfer of Langley developed research and technology to U.S. industry. Entering the program, I had many objectives for my summer research with TAG. Certainly, I wanted to gain a more thorough understanding of the concept of technology transfer and Langley's implementation of a system to promote it to both the Langley community and the community at large. Also, I hoped to become more familiar with Langley's research capabilities and technology inventory available to the public. More specifically, I wanted to learn about the technology transfer process at Langley. Because my mentor is a member of Materials and Manufacturing marketing sector of the Technology Transfer Team, another overriding objective for my research was to take advantage of his work and experience in materials research to learn about the Advanced Materials Research agency wide and help market these developments to private industry. Through the various projects I have been assigned to work on in TAG, I have successfully satisfied the majority of these objectives. Work on the Problem Statement Process for TAG as well as the development of the Advanced Materials Research Brochure have provided me with the opportunity to learn about the technology transfer process from the outside looking in and the inside looking out. Because TAG covers

  17. Laser technology (selected articles)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-04-09

    This paper presents high-energy CW HF/DF chemical lasers developed under the U.S. Navy Sealite program and the Alpha program of the DARPA Triad program, and a brief account of Soviet chemical lasers. Continuous wave HF/DF chemical lasers were developed starting in the late sixties as high-power lasers of consistent interest to military circles. These are lasers that have the most matured technology among present-day high-energy lasers. It is hoped that in the near future CW HF/DF chemical lasers can be developed into a space laser weapon to deal with ICBMs. CW HF/DF chemical lasers are an integration of technologies in gas dynamics, chemistry, fluid chemistry, optics, and lasers. By using the branching chain reaction of heat liberation, inversion of the population ratio is generated to obtain lasers.

  18. Theory in learning technology

    Directory of Open Access Journals (Sweden)

    Laura Czerniewicz

    2011-12-01

    Full Text Available This special issue is being published at a significant point in time in relation tosimultaneous changes in higher education, in technology and in the field of learningtechnology itself. As the 2011 ALT C conference themes clearly state, learningtechnology needs to learn to thrive in a colder and more challenging climate. In thisdifficult political and economic environment technological trends continue todevelop in terms of mobility, cloud computing, ubiquity and the emergence of whathas been called big data. E-learning has become mainstream and the field of learningtechnology itself is beginning to stabilise as a profession. Profession here isunderstood as a knowledge-based occupation and a form of cultural work where thetasks addressed are human problems amenable to expert advice and distinguishablefrom other kinds of work by the fact that it is underpinned by abstract knowledge(Macdonald, 1995.

  19. Electronic equipment packaging technology

    CERN Document Server

    Ginsberg, Gerald L

    1992-01-01

    The last twenty years have seen major advances in the electronics industry. Perhaps the most significant aspect of these advances has been the significant role that electronic equipment plays in almost all product markets. Even though electronic equipment is used in a broad base of applications, many future applications have yet to be conceived. This versatility of electron­ ics has been brought about primarily by the significant advances that have been made in integrated circuit technology. The electronic product user is rarely aware of the integrated circuits within the equipment. However, the user is often very aware of the size, weight, mod­ ularity, maintainability, aesthetics, and human interface features of the product. In fact, these are aspects of the products that often are instrumental in deter­ mining its success or failure in the marketplace. Optimizing these and other product features is the primary role of Electronic Equipment Packaging Technology. As the electronics industry continues to pr...

  20. Modern steelmaking technologies

    Science.gov (United States)

    Sinel'nikov, V. A.; Filippov, G. A.; Lavrov, A. S.; Gunenkov, V. Yu.

    2016-06-01

    Based on our experimental results, we propose the following low-cost technologies in the field of steelmaking for implementation: the use of briquettes, which are alternative to solid cast iron and scrap metal and contain scale and carbon-containing wastes, in the charges of electric furnaces and converters; microalloying of metal by nitride phases; modification of steel in a ladle by SiCa + Ba master alloys; and the application of daisy-chain blowing of the metal in a ladle (small-bubble conditions). The efficiency of these technologies for melting in electric furnaces and secondary metallurgy is supported. It is shown that electromagnetic mixing of metal in combination with the optimum conditions of soft reduction of a slab should be used in continuous casting to form an internal structure in a slab at the level of the first class on the Mannesmann scale.

  1. Technological Innovations from NASA

    Science.gov (United States)

    Pellis, Neal R.

    2006-01-01

    The challenge of human space exploration places demands on technology that push concepts and development to the leading edge. In biotechnology and biomedical equipment development, NASA science has been the seed for numerous innovations, many of which are in the commercial arena. The biotechnology effort has led to rational drug design, analytical equipment, and cell culture and tissue engineering strategies. Biomedical research and development has resulted in medical devices that enable diagnosis and treatment advances. NASA Biomedical developments are exemplified in the new laser light scattering analysis for cataracts, the axial flow left ventricular-assist device, non contact electrocardiography, and the guidance system for LASIK surgery. Many more developments are in progress. NASA will continue to advance technologies, incorporating new approaches from basic and applied research, nanotechnology, computational modeling, and database analyses.

  2. Advances in desalination technology

    International Nuclear Information System (INIS)

    Pankratz, T.M.

    2005-01-01

    Seawater desalination has been the cornerstone of the Middle East's water supply strategy since the mid-1950s, and most of the installed desalination capacity is still provided by multistage flash evaporators. But, desalination is changing. In fact, the term 'desalination' is no longer limited to seawater applications; desalination technologies are now routinely employed to desalinate brackish groundwater and repurify municipal effluents. Recent advances in desalination technology have simultaneously reduced costs while dramatically improving performance and reliability to the point where desalination technologies now compete with 'conventional' treatment processes in many applications. New commercial strategies and a realisation of the economies-of-scale have led to further improvements in plant economics, and an increase in the size of plants now being developed and constructed. This presentation reviews advances in membrane and membrane pretreatment systems, energy recovery devices, materials of construction, hybrid process configurations, increased unit capacities, and the use of public-private partnerships; all of which have led to reduced capital and operating costs, enabling desalination to be economically competitive with traditional treatment options. Advances in desalination technology have resulted in better performances, lower capital and operating costs, and increased application of desalination systems. In the face of increased water shortages and growing costs of 'conventional treatment', this trend will certainly continue. (author)

  3. Catalyst technology roadmap report

    Energy Technology Data Exchange (ETDEWEB)

    Jackson, N.B.

    1997-06-01

    This report outlines the future technology needs of the Chemical Industry in the area of catalysis and is a continuation of the process that produced the report Technology Vision 2020: The U.S. Chemical Industry and the Council for Chemical Research`s (CCR) Chemical Synthesis Team follow-up work in chemical synthesis. Vision 2020 developed a 25-year vision for the chemical industry and outlined the challenges to be addressed in order to achieve this vision. This report, which outlines the catalysis technology roadmap, is based on the output of the CCR`s Chemical Synthesis Team, plus a workshop held March -20-21, 1997, which included about 50 participants, with catalysis experts from industry, academia, and government. It is clear that all participants view catalysis as a fundamental driver to the 0274 economic and environmental viability of the chemical industry. Advances in catalytic science and technology are among the most crucial challenges to achieving the goals of the chemical industry advanced in Vision 2020.

  4. Blast Technologies

    Science.gov (United States)

    2011-06-27

    Team Leader Risa Scherer Blast Mitigation Interior and Laboratory Team Leader Blast Technologies POC’s Government Point Of Contacts (POCs): To...to yield injury assessments at higher fidelities and with higher confidence UNCLASSIFIED UNCLASSIFIED Risa Scherer Blast Mitigation Interior and

  5. Health technology

    International Nuclear Information System (INIS)

    Nicolas, Delphine; Dangleant, Caroline; Ganier, Aude; Kaczmarek, Delphine

    2008-01-01

    The CEA is an organization with a primarily technological focus, and one of the key areas in which it carries out research is Health Technology. This field of research was recognized and approved by the French Atomic Energy Committee on July 20, 2004. The expectations of both the public and health care professionals relate to demands for the highest standards of health care, at minimum risk. This implies a need to diagnose illness and disease as accurately and as at early a stage as possible, to target surgery precisely to deal only with damaged organs or tissues, to minimize the risk of side effects, allergies and hospital-acquired infections, to follow-up and, as far as possible, tailor the health delivery system to each individual's needs and his or her lifestyle. The health care sector is subject to rapid changes and embraces a vast range of scientific fields. It now requires technological developments that will serve to gather increasing quantities of useful information, analyze and integrate it to obtain a full understanding of highly complex processes and to be able to treat the human body as un-invasively as possible. All the technologies developed require assessment, especially in the hospital environment. (authors)

  6. Technology transfer

    International Nuclear Information System (INIS)

    Boury, C.

    1986-01-01

    This paper emphasizes in the specific areas of design, engineering and component production. This paper presents what Framatome has to offer in these areas and its export oriented philosophy. Then, a typical example of this technology transfer philosophy is the collaboration with the South Korean firm, Korea Heavy Industries Corporation (KHIC) for the supply of KNU 9 and KNU 10 power stations

  7. Technology Transfer

    Science.gov (United States)

    Bullock, Kimberly R.

    1995-01-01

    The development and application of new technologies in the United States has always been important to the economic well being of the country. The National Aeronautics and Space Administration (NASA) has been an important source of these new technologies for almost four decades. Recently, increasing global competition has emphasized the importance of fully utilizing federally funded technologies. Today NASA must meet its mission goals while at the same time, conduct research and development that contributes to securing US economic growth. NASA technologies must be quickly and effectively transferred into commercial products. In order to accomplish this task, NASA has formulated a new way of doing business with the private sector. Emphasis is placed on forming mutually beneficial partnerships between NASA and US industry. New standards have been set in response to the process that increase effectiveness, efficiency, and timely customer response. This summer I have identified potential markets for two NASA inventions: including the Radially Focused Eddy Current Sensor for Characterization of Flaws in Metallic Tubing and the Radiographic Moire. I have also worked to establish a cooperative program with TAG, private industry, and a university known as the TAG/Industry/Academia Program.

  8. Energy Technology.

    Science.gov (United States)

    Eaton, William W.

    Reviewed are technological problems faced in energy production including locating, recovering, developing, storing, and distributing energy in clean, convenient, economical, and environmentally satisfactory manners. The energy resources of coal, oil, natural gas, hydroelectric power, nuclear energy, solar energy, geothermal energy, winds, tides,…

  9. (Environmental technology)

    Energy Technology Data Exchange (ETDEWEB)

    Boston, H.L.

    1990-10-12

    The traveler participated in a conference on environmental technology in Paris, sponsored by the US Embassy-Paris, US Environmental Protection Agency (EPA), the French Environmental Ministry, and others. The traveler sat on a panel for environmental aspects of energy technology and made a presentation on the potential contributions of Oak Ridge National Laboratory (ORNL) to a planned French-American Environmental Technologies Institute in Chattanooga, Tennessee, and Evry, France. This institute would provide opportunities for international cooperation on environmental issues and technology transfer related to environmental protection, monitoring, and restoration at US Department of Energy (DOE) facilities. The traveler also attended the Fourth International Conference on Environmental Contamination in Barcelona. Conference topics included environmental chemistry, land disposal of wastes, treatment of toxic wastes, micropollutants, trace organics, artificial radionuclides in the environment, and the use biomonitoring and biosystems for environmental assessment. The traveler presented a paper on The Fate of Radionuclides in Sewage Sludge Applied to Land.'' Those findings corresponded well with results from studies addressing the fate of fallout radionuclides from the Chernobyl nuclear accident. There was an exchange of new information on a number of topics of interest to DOE waste management and environmental restoration needs.

  10. Geospatial Technology

    Science.gov (United States)

    Reed, Philip A.; Ritz, John

    2004-01-01

    Geospatial technology refers to a system that is used to acquire, store, analyze, and output data in two or three dimensions. This data is referenced to the earth by some type of coordinate system, such as a map projection. Geospatial systems include thematic mapping, the Global Positioning System (GPS), remote sensing (RS), telemetry, and…

  11. Towards a National Strategy for Information Technology

    National Research Council Canada - National Science Library

    Hampton, Emanuel

    1999-01-01

    In the 21st century, our national security and our continued economic prosperity will depend on how effectively we develop national strategies and policies to shape the development and use of information technology...

  12. Water Treatment Technology - Distribution Systems.

    Science.gov (United States)

    Ross-Harrington, Melinda; Kincaid, G. David

    One of twelve water treatment technology units, this student manual on distribution systems provides instructional materials for six competencies. (The twelve units are designed for a continuing education training course for public water supply operators.) The competencies focus on the following areas: types of pipe for distribution systems, types…

  13. Technological Development and Fisheries Management

    NARCIS (Netherlands)

    Eigaard, O.R.; Marchal, P.; Gislason, H.; Rijnsdorp, A.D.

    2014-01-01

    Many marine fish stocks are overexploited and considerable overcapacity exists in fishing fleets worldwide. One of the reasons for the imbalance between resource availability and fishing capacity is technological development, which continuously increases the efficiency of the vessels—a mechanism

  14. Modern Chemical Technology, Volume 6.

    Science.gov (United States)

    Pecsok, Robert L., Ed.; Chapman, Kenneth, Ed.

    This volume contains chapters 32-39 for the American Chemical Society (ACS) "Modern Chemical Technology" (ChemTeC) instructional materials intended to prepare chemical technologists. The study of organic chemistry is continued as these major topics are considered: alcohols and phenols, alkyl and aryl halides, ethers, aldehydes and…

  15. Neutrons for technology and science

    International Nuclear Information System (INIS)

    Aeppli, G.

    1995-01-01

    We reviewed recent work using neutrons generated at nuclear reactors an accelerator-based spallation sources. Provided that large new sources become available, neutron beams will continue to have as great an impact on technology and science as in the past

  16. Advances in Machine Technology.

    Science.gov (United States)

    Clark, William R; Villa, Gianluca; Neri, Mauro; Ronco, Claudio

    2018-01-01

    Continuous renal replacement therapy (CRRT) machines have evolved into devices specifically designed for critically ill over the past 40 years. In this chapter, a brief history of this evolution is first provided, with emphasis on the manner in which changes have been made to address the specific needs of the critically ill patient with acute kidney injury. Subsequently, specific examples of technology developments for CRRT machines are discussed, including the user interface, pumps, pressure monitoring, safety features, and anticoagulation capabilities. © 2018 S. Karger AG, Basel.

  17. Technology-assisted psychoanalysis.

    Science.gov (United States)

    Scharff, Jill Savege

    2013-06-01

    Teleanalysis-remote psychoanalysis by telephone, voice over internet protocol (VoIP), or videoteleconference (VTC)-has been thought of as a distortion of the frame that cannot support authentic analytic process. Yet it can augment continuity, permit optimum frequency of analytic sessions for in-depth analytic work, and enable outreach to analysands in areas far from specialized psychoanalytic centers. Theoretical arguments against teleanalysis are presented and countered and its advantages and disadvantages discussed. Vignettes of analytic process from teleanalytic sessions are presented, and indications, contraindications, and ethical concerns are addressed. The aim is to provide material from which to judge the authenticity of analytic process supported by technology.

  18. Benchmarking foreign electronics technologies

    Energy Technology Data Exchange (ETDEWEB)

    Bostian, C.W.; Hodges, D.A.; Leachman, R.C.; Sheridan, T.B.; Tsang, W.T.; White, R.M.

    1994-12-01

    This report has been drafted in response to a request from the Japanese Technology Evaluation Center`s (JTEC) Panel on Benchmarking Select Technologies. Since April 1991, the Competitive Semiconductor Manufacturing (CSM) Program at the University of California at Berkeley has been engaged in a detailed study of quality, productivity, and competitiveness in semiconductor manufacturing worldwide. The program is a joint activity of the College of Engineering, the Haas School of Business, and the Berkeley Roundtable on the International Economy, under sponsorship of the Alfred P. Sloan Foundation, and with the cooperation of semiconductor producers from Asia, Europe and the United States. Professors David A. Hodges and Robert C. Leachman are the project`s Co-Directors. The present report for JTEC is primarily based on data and analysis drawn from that continuing program. The CSM program is being conducted by faculty, graduate students and research staff from UC Berkeley`s Schools of Engineering and Business, and Department of Economics. Many of the participating firms are represented on the program`s Industry Advisory Board. The Board played an important role in defining the research agenda. A pilot study was conducted in 1991 with the cooperation of three semiconductor plants. The research plan and survey documents were thereby refined. The main phase of the CSM benchmarking study began in mid-1992 and will continue at least through 1997. reports are presented on the manufacture of integrated circuits; data storage; wireless technology; human-machine interfaces; and optoelectronics. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

  19. Photovoltaic technologies

    International Nuclear Information System (INIS)

    Bagnall, Darren M.; Boreland, Matt

    2008-01-01

    Photovoltaics is already a billion dollar industry. It is experiencing rapid growth as concerns over fuel supplies and carbon emissions mean that governments and individuals are increasingly prepared to ignore its current high costs. It will become truly mainstream when its costs are comparable to other energy sources. At the moment, it is around four times too expensive for competitive commercial production. Three generations of photovoltaics have been envisaged that will take solar power into the mainstream. Currently, photovoltaic production is 90% first-generation and is based on silicon wafers. These devices are reliable and durable, but half of the cost is the silicon wafer and efficiencies are limited to around 20%. A second generation of solar cells would use cheap semiconductor thin films deposited on low-cost substrates to produce devices of slightly lower efficiency. A number of thin-film device technologies account for around 5-6% of the current market. As second-generation technology reduces the cost of active material, the substrate will eventually be the cost limit and higher efficiency will be needed to maintain the cost-reduction trend. Third-generation devices will use new technologies to produce high-efficiency devices. Advances in nanotechnology, photonics, optical metamaterials, plasmonics and semiconducting polymer sciences offer the prospect of cost-competitive photovoltaics. It is reasonable to expect that cost reductions, a move to second-generation technologies and the implementation of new technologies and third-generation concepts can lead to fully cost-competitive solar energy in 10-15 years. (author)

  20. Canadian fusion fuels technology project

    International Nuclear Information System (INIS)

    1986-01-01

    The Canadian Fusion Fuels Technology Project was launched in 1982 to coordinate Canada's provision of fusion fuels technology to international fusion power development programs. The project has a mandate to extend and adapt existing Canadian tritium technologies for use in international fusion power development programs. 1985-86 represents the fourth year of the first five-year term of the Canadian Fusion Fuels Technology Project (CFFTP). This reporting period coincides with an increasing trend in global fusion R and D to direct more effort towards the management of tritium. This has resulted in an increased linking of CFFTP activities and objectives with those of facilities abroad. In this way there has been a continuing achievement resulting from CFFTP efforts to have cooperative R and D and service activities with organizations abroad. All of this is aided by the cooperative international atmosphere within the fusion community. This report summarizes our past year and provides some highlights of the upcoming year 1986/87, which is the final year of the first five-year phase of the program. AECL (representing the Federal Government), the Ministry of Energy (representing Ontario) and Ontario Hydro, have given formal indication of their intent to continue with a second five-year program. Plans for the second phase will continue to emphasize tritium technology and remote handling

  1. A Re-Evaluation of Mobile Communication Technology: A Theoretical Approach for Technology Evaluation in Contemporary Digital Learning

    Science.gov (United States)

    Yumurtaci, Onur

    2017-01-01

    We live in an age of continual technological development. Rapidly developing technologies have found use in nearly all aspects of life. As such, it is understandable that technology has also infiltrated the field of education. Information and Communication Technology (ICT) has provided us with the technical underpinnings for distance and lifelong…

  2. Drift vortices in continuous media

    International Nuclear Information System (INIS)

    Chernousenko, V.M.; Chernenko, I.V.; Chernyshenko, S.V.

    1989-01-01

    The work is devoted to investigation into the problems of large-scale cortex drift and generation in continuous media based on the solution of notably non-linear differential equations. Using the capability of the modern computer technique it is possible to consider a series of cases with regard to medium viscosity and its inhomogeneity and with regard to three-dimensional vortex nature. Based on the solutions obtained the large-scale steady-state vortex generation processes are considered. The results can be used when studying non-linear phenomena in plasma and processes of substance and energy transfer in non-equilibrium media. 16 refs.; 5 figs

  3. Continuous Non-malleable Codes

    DEFF Research Database (Denmark)

    Faust, Sebastian; Mukherjee, Pratyay; Nielsen, Jesper Buus

    2014-01-01

    Non-malleable codes are a natural relaxation of error correcting/ detecting codes that have useful applications in the context of tamper resilient cryptography. Informally, a code is non-malleable if an adversary trying to tamper with an encoding of a given message can only leave it unchanged or ...... applications of non-malleable codes in this setting required to perfectly erase the entire memory after each execution and required the adversary to be restricted in memory. We show that continuous non-malleable codes avoid these restrictions....

  4. Continuous flow dielectrophoretic particle concentrator

    Science.gov (United States)

    Cummings, Eric B [Livermore, CA

    2007-04-17

    A continuous-flow filter/concentrator for separating and/or concentrating particles in a fluid is disclosed. The filter is a three-port device an inlet port, an filter port and a concentrate port. The filter separates particles into two streams by the ratio of their dielectrophoretic mobility to their electrokinetic, advective, or diffusive mobility if the dominant transport mechanism is electrokinesis, advection, or diffusion, respectively.Also disclosed is a device for separating and/or concentrating particles by dielectrophoretic trapping of the particles.

  5. Technology Programme

    International Nuclear Information System (INIS)

    Batistoni, Paola; De Marco, Francesco; Pieroni, Leonardo

    2005-01-01

    The technology activities carried out by the Euratom-ENEA Association in the framework of the European Fusion Development Agreement concern the Next Step (International Thermonuclear Experimental Reactor - ITER), the Long-Term Programme (breeder blanket, materials, International Fusion Materials Irradiation Facility - IFMIF), Power Plant Conceptual Studies and Socio-Economic Studies. The Underlying Technology Programme was set up to complement the fusion activities as well to develop technologies with a wider range of interest. The Technology Programme mainly involves staff from the Frascati laboratories of the Fusion Technical and Scientific Unit and from the Brasimone laboratories of the Advanced Physics Technologies Unit. Other ENEA units also provide valuable contributions to the programme. ENEA is heavily engaged in component development/testing and in design and safety activities for the European Fusion Technology Programme. Although the work documented in the following covers a large range of topics that differ considerably because they concern the development of extremely complex systems, the high level of integration and coordination ensures the capability to cover the fusion system as a whole. In 2004 the most significant testing activities concerned the ITER primary beryllium-coated first wall. In the field of high-heat-flux components, an important achievement was the qualification of the process for depositing a copper liner on carbon fibre composite (CFC) hollow tiles. This new process, pre-brazed casting (PBC), allows the hot radial pressing (HRP) joining procedure to be used also for CFC-based armour monoblock divertor components. The PBC and HRP processes are candidates for the construction of the ITER divertor. In the materials field an important milestone was the commissioning of a new facility for chemical vapour infiltration/deposition, used for optimising silicon carbide composite (SiCf/SiC) components. Eight patents were deposited during 2004

  6. Technology Programme

    Energy Technology Data Exchange (ETDEWEB)

    Batistoni, Paola; De Marco, Francesco; Pieroni, Leonardo (ed.)

    2005-07-01

    The technology activities carried out by the Euratom-ENEA Association in the framework of the European Fusion Development Agreement concern the Next Step (International Thermonuclear Experimental Reactor - ITER), the Long-Term Programme (breeder blanket, materials, International Fusion Materials Irradiation Facility - IFMIF), Power Plant Conceptual Studies and Socio-Economic Studies. The Underlying Technology Programme was set up to complement the fusion activities as well to develop technologies with a wider range of interest. The Technology Programme mainly involves staff from the Frascati laboratories of the Fusion Technical and Scientific Unit and from the Brasimone laboratories of the Advanced Physics Technologies Unit. Other ENEA units also provide valuable contributions to the programme. ENEA is heavily engaged in component development/testing and in design and safety activities for the European Fusion Technology Programme. Although the work documented in the following covers a large range of topics that differ considerably because they concern the development of extremely complex systems, the high level of integration and coordination ensures the capability to cover the fusion system as a whole. In 2004 the most significant testing activities concerned the ITER primary beryllium-coated first wall. In the field of high-heat-flux components, an important achievement was the qualification of the process for depositing a copper liner on carbon fibre composite (CFC) hollow tiles. This new process, pre-brazed casting (PBC), allows the hot radial pressing (HRP) joining procedure to be used also for CFC-based armour monoblock divertor components. The PBC and HRP processes are candidates for the construction of the ITER divertor. In the materials field an important milestone was the commissioning of a new facility for chemical vapour infiltration/deposition, used for optimising silicon carbide composite (SiCf/SiC) components. Eight patents were deposited during 2004

  7. Technological Networks

    Science.gov (United States)

    Mitra, Bivas

    The study of networks in the form of mathematical graph theory is one of the fundamental pillars of discrete mathematics. However, recent years have witnessed a substantial new movement in network research. The focus of the research is shifting away from the analysis of small graphs and the properties of individual vertices or edges to consideration of statistical properties of large scale networks. This new approach has been driven largely by the availability of technological networks like the Internet [12], World Wide Web network [2], etc. that allow us to gather and analyze data on a scale far larger than previously possible. At the same time, technological networks have evolved as a socio-technological system, as the concepts of social systems that are based on self-organization theory have become unified in technological networks [13]. In today’s society, we have a simple and universal access to great amounts of information and services. These information services are based upon the infrastructure of the Internet and the World Wide Web. The Internet is the system composed of ‘computers’ connected by cables or some other form of physical connections. Over this physical network, it is possible to exchange e-mails, transfer files, etc. On the other hand, the World Wide Web (commonly shortened to the Web) is a system of interlinked hypertext documents accessed via the Internet where nodes represent web pages and links represent hyperlinks between the pages. Peer-to-peer (P2P) networks [26] also have recently become a popular medium through which huge amounts of data can be shared. P2P file sharing systems, where files are searched and downloaded among peers without the help of central servers, have emerged as a major component of Internet traffic. An important advantage in P2P networks is that all clients provide resources, including bandwidth, storage space, and computing power. In this chapter, we discuss these technological networks in detail. The review

  8. FY-95 technology catalog. Technology development for buried waste remediation

    International Nuclear Information System (INIS)

    1995-01-01

    The US Department of Energy's (DOE) Buried Waste Integrated Demonstration (BWID) program, which is now part of the Landfill Stabilization Focus Area (LSFA), supports applied research, development, demonstration, and evaluation of a multitude of advanced technologies dealing with underground radioactive and hazardous waste remediation. These innovative technologies are being developed as part of integrated comprehensive remediation systems for the effective and efficient remediation of buried waste sites throughout the DOE complex. These efforts are identified and coordinated in support of Environmental Restoration (EM-40) and Waste Management (EM-30) needs and objectives. Sponsored by the DOE Office of Technology Development (EM-50), BWID and LSFA work with universities and private industry to develop technologies that are being transferred to the private sector for use nationally and internationally. This report contains the details of the purpose, logic, and methodology used to develop and demonstrate DOE buried waste remediation technologies. It also provides a catalog of technologies and capabilities with development status for potential users. Past FY-92 through FY-94 technology testing, field trials, and demonstrations are summarized. Continuing and new FY-95 technology demonstrations also are described

  9. A community continuity programme: volunteer faculty mentors and continuity learning.

    Science.gov (United States)

    McGeehan, John; English, Richard; Shenberger, Keith; Tracy, Gerald; Smego, Raymond

    2013-02-01

    Longitudinal generalist preceptorship experiences early in medical education can have beneficial effects on how students practise the art and science of medicine, regardless of their eventual career choices. We evaluated the first 2 years of implementation of an integrated, regional campus-based, early clinical experience programme, the Community Continuity Program, at our new community-based medical school that is under the supervision of volunteer primary care faculty members acting as continuity mentors (CMs). Curricular components for years 1 and 2 consisted of three annual 1-week community-based experiences with CMs, extensive physical diagnosis practice, interprofessional learning activities, a multigenerational family care experience, a mandatory Community Health Research Project (CHRP) in year 1 and a mandatory Quality Improvement Project in year 2. Outcome measures included student, faculty member and programme evaluations, student reflective narratives in portal-based e-journals, a Liaison Committee on Medical Education (LCME) self-study student survey and serial level-of-empathy surveys.   Students found all elements of this integrated community experience programme beneficial and worthwhile, especially the CMs and the use of standardised and real-life patients. CMs noted effective and professional student-patient interactions. The number of reflective e-journal postings per student during year1 ranged from 14 to 81 (mean, 47). Serial empathy questionnaires administered over 2 years demonstrated preservation of student empathy, and students believed that the programme had a positive effect on their personal level of empathy.   An integrative, longitudinal, community-based, early clinical experience programme driven by volunteer CMs provides patient-centered instruction for preclinical students in the clinical, social, behavioural, ethical and research foundations of medicine. © Blackwell Publishing Ltd 2013.

  10. Continuous-variable quantum computing on encrypted data

    DEFF Research Database (Denmark)

    Marshall, Kevin; Jacobsen, Christian Scheffmann; Schäfermeier, Clemens

    2016-01-01

    . We demonstrate losses of up to 10 km both ways between the client and the server and show that security can still be achieved. Our approach offers a number of practical benefits (from a quantum perspective) that could one day allow the potential widespread adoption of this quantum technology...... in the sense that they are dependent on a hacker's computational power. Here we theoretically investigate, and experimentally demonstrate with Gaussian displacement and squeezing operations, a quantum solution that achieves the security of a user's privacy using the practical technology of continuous variables...

  11. Issues in continuous air monitoring

    International Nuclear Information System (INIS)

    Rodgers, J.C.

    1991-01-01

    The Health Physics groups at Los Alamos determined that the 15 yr-old alpha CAM instrumentation in use at the Laboratory would soon have to be replaced and upgraded. A program was initiated to prepare detailed performance specifications, evaluate new CAM instrumentation being offered, and if necessary, to develop advanced technologies which would enable the Laboratory to meet or exceed all of the requirements of the new DOE Order 5480.11. ''Radiation Protection for Occupational Workers'' (DOE, 1988), and other related Orders and standards. After careful evaluation of available alpha CAMs and consideration of the many factors affecting CAM performance, a project for the design, and development of advance CAM technology was initiated. This project culminated in the completion of a new alpha CAM concept featuring advances in the design of the CAM inlet enabling discrimination against radon daughters, in the multi-channel analyzer electronics, in the data processing and communication electronics, and in background compensation algorithm. The objective in the following discussion is examine the DOE Order 5480.11 requirements in some detail. While the new CAM sensitivity requirement is of critical importance, this is only one of many requirements of the Order with implications for CAM design, placement and operation. It is essential to orient our thinking about CAMs to the primary objectives of the Order with air monitoring implications. This paper discusses air monitoring issues in the Order. 7 refs

  12. Innovative Technology in Automotive Technology

    Science.gov (United States)

    Gardner, John

    2007-01-01

    Automotive Technology combines hands-on training along with a fully integrated, interactive, computerized multistationed facility. Our program is a competency based, true open-entry/open-exit program that utilizes flexible self-paced course outlines. It is designed around an industry partnership that promotes community and economic development,…

  13. Participatory Continuing Design: "Living with" Videoconferencing in Rehabilitation.

    Science.gov (United States)

    Aanestad, Margunn; Driveklepp, Anne Merete; Sørli, Hilde; Hertzum, Morten

    2017-01-01

    While much research emphasizes design-before-use, we here study design-in-use. The notion of participatory continuing design is introduced to draw attention to the ongoing work of incorporating information and communication technology into work processes in healthcare institutions. Through an empirical case study of how telemedicine, in the form of videoconferencing, was taken up in a rehabilitation hospital in Norway, the nature of such ongoing experimentation, learning, and redesign is described. When contrasted with traditional design-before-use practices, participatory continuing design differs in terms of its timing, object, process, outcome, and participants. We offer recommendations for how such processes can be supported in healthcare organizations.

  14. Continuity of care: important, but only the first step

    Directory of Open Access Journals (Sweden)

    Corrigan Janet M

    2012-05-01

    Full Text Available Abstract Continuity of care is critical to achieving the best outcomes, especially for patients with chronic conditions. Israel’s strong commitment to primary care as a central organizing concept of the health system, accompanied by investments in health information technology and training primary care physicians, has contributed to its impressive levels of continuity of care. Taking the next steps toward a comprehensive system of patient- and population-centered care for proactive management of patients with chronic conditions has much potential to further enhance outcomes and reduce costs.

  15. Application of electromagnetic mixing on steel continuous casting

    International Nuclear Information System (INIS)

    Smirnov, A.A.

    1995-01-01

    Evaluation of results relative to mathematical analysis of hydrodynamic events in the continuously-casted ingot core by application of conduction electromagnetic mixing is presented. The electromagnetic mixing regime is realized in industrial tests in the course of continuous casting the St3sp and St10sp steels with the rate of 0.4 m/min. The problems related to technology of steel casting and industrial application of conduction electromagnetic mixing are considered in the work(4). The results obtained are in fair agreement with the results of mathematical modelling. 5 refs., 3 figs

  16. Continuous positive airway pressure (CPAP).

    Science.gov (United States)

    Sahni, R; Wung, J T

    1998-01-01

    Progress in neonatal intensive care is closely linked to improvements in the management of respiratory failure in small infants. This applies to the care of the preterm infants with immature lungs, and also to treatment of the preterm or full term infants with specific diseases that are associated with respiratory failure. Respiratory distress of the newborn continues to account for significant morbidity in the intensive care unit. The spectrum of disease ranges from mild distress to severe respiratory failure requiring varying degrees of support. The current modalities of ventilatory assistance range from the more benign continuous positive airway pressure (CPAP) to conventional mechanical ventilation, and on to high frequency ventilation. It is a reasonable supposition that the type of ventilatory assistance provided to these infants should be graded according to the severity of the disease. However, the principal objective in selecting the mode of respiratory support should be to use a modality which results in minimal volo- or barotrauma to the infant. The following detailed description on CPAP explains its physiological effects, delivery system, indications for use, application, maintenance, and associated complications. The equipment described is simple to use, has a greater cost benefit, and has a more universal application, which is of help to smaller units including those in the developing parts of the world. We have also included our institutional clinical experience of CPAP usage in very low birth weight infants from the periods before and after commercial availability of surfactant in the United States.

  17. Early occurring and continuing effects

    International Nuclear Information System (INIS)

    Scott, B.R.; Hahn, F.F.

    1985-01-01

    This chapter deals with health-risk estimates for early and continuing effects of exposure to ionizing radiations that could be associated with light water nuclear power plants accidents. Early and continuing effects considered are nonneoplastic diseases and symptoms that normally occur soon after radiation exposure, but may also occur after years have passed. They are generally associated with relatively high (greater than 1 Gy) doses. For most of the effects considered, there is a practical dose threshold. Organs of primary interest, because of their high sensitivity or the likelihood of receiving a large radiation dose, are bone marrow, gastrointestinal tract, thyroid glands, lungs, skin, gonads, and eyes. In utero exposure of the fetus is also considered. New data and modeling techniques available since publication of the Reactor Safety Study (WASH 1400, 1975) were used along with data cited in the Study to develop improved health-risk models for morbidity and mortality. The new models are applicable to a broader range of accident scenarios, provide a more detailed treatment of dose protraction effects, and include morbidity effects not considered in the Reactor Safety Study. 115 references, 20 figures, 19 tables

  18. Continuous auditing: A literature review

    Directory of Open Access Journals (Sweden)

    Flávia Cruz de Souza

    2008-09-01

    Full Text Available Recent fraud scandals involving highly known corporations like Enron, WorldCom, and Xerox have eroded public confidence in financial reporting. At the same time, the auditing profession has suffered a big hit. In this scenario, Continuous Auditing (CA seems to have emerged as a response to recover the credibility of the auditing profession as well as meeting Sarbanes-Oxley (SOX requirements. This study, that adopts an exploratory approach, analyzes the existing literature on this topic. First, we address the concepts, models and implications of CA. After, throughout a search on the journals indexed at the CAPES's Basis, a literature review is conducted. A total of 57 articles were selected. We analyze authorship, affiliation, publications, year and type of research of papers that have addressed CA. Findings evidence that most articles addressing CA are non-empirical and adopt a conceptual approach. Also, there is an increasing tendency of continuous auditing studies. Rutgers University seems to be the World's leading research center on CA. This study aims to contribute to the Accounting Science by evidencing possibilities for research and publication in CA.

  19. Earl occurring and continuing effects

    International Nuclear Information System (INIS)

    Scott, B.R.; Hahn, F.F.

    1989-01-01

    This chapter develops health-risk models for early and continuing effects of exposure to beta or gamma radiation that could be associated with light water nuclear power plant accidents. The main purpose of the chapter is to provide details on each health-risk model and on the data used. Early and continuing effects considered are prodromal symptoms and nonneoplastic diseases that usually occur soon after a brief radiation exposure. These effects are generally associated with relatively high (greater than 1 Gy) absorbed organ doses. For most of the effects considered, there is an absorbed organ dose threshold below which no effects are seen. Some information is provided on health effects observed in victims of the Chernobyl power plant accident. Organs of primary interest, because of their high sensitivity or their potential for receiving large doses, are bone marrow, gastrointestinal tract, thyroid glands, lungs, skin, gonads, and eyes. Exposure of the fetus is also considered. Additional data and modeling techniques available since publication of the Reactor Safety Study were used to obtain models for morbidity and mortality

  20. Accelerator based continuous neutron source.

    CERN Document Server

    Shapiro, S M; Ruggiero, A G

    2003-01-01

    Until the last decade, most neutron experiments have been performed at steady-state, reactor-based sources. Recently, however, pulsed spallation sources have been shown to be very useful in a wide range of neutron studies. A major review of neutron sources in the US was conducted by a committee chaired by Nobel laureate Prof. W. Kohn: ''Neutron Sources for America's Future-BESAC Panel on Neutron Sources 1/93''. This distinguished panel concluded that steady state and pulsed sources are complementary and that the nation has need for both to maintain a balanced neutron research program. The report recommended that both a new reactor and a spallation source be built. This complementarity is recognized worldwide. The conclusion of this report is that a new continuous neutron source is needed for the second decade of the 20 year plan to replace aging US research reactors and close the US neutron gap. it is based on spallation production of neutrons using a high power continuous superconducting linac to generate pr...

  1. Continuous-variable topological codes

    Science.gov (United States)

    Morimae, Tomoyuki

    2013-10-01

    Topological code is a stabilizer quantum error correcting code whose generators are local but logical operators are topologically nontrivial and nonlocal. It offers interesting features such as the homological deformations of string operators and anyonic excitations on it. Topological codes are also closely related to the “topological order,” which has been an important concept in condensed-matter physics. In this paper, we consider continuous-variable versions of topological codes, including the toric code by Kitaev [A. Y. Kitaev, Ann. Phys.APNYA60003-491610.1016/S0003-4916(02)00018-0 303, 2 (2003)] with a single type of stabilizer on the checkerboard lattice, and the color code by Bombin and Martin-Delgado [H. Bombin and M. A. Martin-Delgado, Phys. Rev. Lett.PRLTAO0031-900710.1103/PhysRevLett.97.180501 97, 180501 (2006)]. We show that it is possible to consider continuous-variable analog of these topological codes.

  2. Playful Technology

    DEFF Research Database (Denmark)

    Johansen, Stine Liv; Eriksson, Eva

    2013-01-01

    In this paper, the design of future services for children in Danish public libraries is discussed, in the light of new challenges and opportunities in relation to new media and technologies. The Danish government has over the last few years initiated and described a range of initiatives regarding...... the future of public libraries, especially in relation to children as a particular user group. This paper explores play culture, and takes a stance especially in the project ‘Families at play in the library’, but also in experiences from related projects. The focus is on families playing together...... in the library, the changing role of the librarians and the library space. We argue that intertwining traditional library services with new media forms and engaging play is the core challenge for future design in physical public libraries, but also that it is through new media and technology that new...

  3. Technology transfer

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    Illustrated by the example of the FRG's nuclear energy exports, it is shown that the nuclear technology transfer leads to new dimensions of intergovernmental relations, which hold within themselves on account of multiple state-to-state, scientific, industrial and - last but not least - personal contacts the chance of far-reaching friendships between countries and people. If the chance is taken, this can also be seen as an important contribution towards maintaining the peace. (orig.) [de

  4. Group technology

    International Nuclear Information System (INIS)

    Rome, C.P.

    1976-01-01

    Group Technology has been conceptually applied to the manufacture of batch-lots of 554 machined electromechanical parts which now require 79 different types of metal-removal tools. The products have been grouped into 7 distinct families which require from 8 to 22 machines in each machine-cell. Throughput time can be significantly reduced and savings can be realized from tooling, direct-labor, and indirect-labor costs

  5. Army Technology

    Science.gov (United States)

    2015-02-01

    MUTT ) is a semi-autonomous robotic follower that lightens the load for Soldiers by decreasing the amount of equipment they need to carry when...dismounted in the toughest of terrains. The MUTT uses advanced, proven commercial technology that has been adapted for the rigors of the battlefield...With ultra-quiet electric motors, the MUTT gives Soldiers unmatched internal transportability options and expeditionary power that includes hands- free

  6. ADSL Technology

    Directory of Open Access Journals (Sweden)

    Slavko Šarić

    2002-11-01

    Full Text Available The paper deals with the ADSL (Asymmetric Digital SubscriberLine technology- the asymmetric digital telecommunicationtechnology. It is characterised by high-speed transmissionof data and simultaneous transmission of information regardingthe throughput capacity of the telephone network. Thisresults in better efficiency of transmission, and higher utilisationof the bandwidth. Due to its advantages, the use of ADSLtechnology is increasing daily, especially by ente1prises in Europeand worldwide.

  7. Nuclear technology

    International Nuclear Information System (INIS)

    1983-03-01

    This report examines nuclear technology in Canada, with emphasis on Quebec, as a means of revitilizing industry. The historical, present day, and future states of Atomic Energy of Canada Limited are examined. Future research programs are discussed in greatest detail. These range from disposal of porcine wastes to new applications for electricity to nuclear medical techniques (to cite only a few examples). The executive summary is written in English. (23 fig., 16 tab.)

  8. Technology Management

    DEFF Research Database (Denmark)

    Pilkington, Alan

    2014-01-01

    This paper reports a bibliometric analysis (co-citation network analysis) of 10 journals in the management of technology (MOT) field. As well as introducing various bibliometric ideas, network analysis tools identify and explore the concepts covered by the field and their inter-relationships. Spe......This paper reports a bibliometric analysis (co-citation network analysis) of 10 journals in the management of technology (MOT) field. As well as introducing various bibliometric ideas, network analysis tools identify and explore the concepts covered by the field and their inter......-relationships. Specific results from different levels of analysis show the different dimensions of technology management: • Co-word terms identify themes • Journal co-citation network: linking to other disciplines • Co-citation network show concentrations of themes The analysis shows that MOT has a bridging role...... in integrating ideas from several distinct disciplines. This suggests that management and strategy are central to MOT which essentially relates to the firm rather than policy. Similarly we have a dual focus on capabilities, but can see subtle differences in how we view these ideas, either through an inwards...

  9. NASA Technology Applications Team: Commercial applications of aerospace technology

    Science.gov (United States)

    1994-01-01

    The Research Triangle Institute (RTI) is pleased to report the results of NASA contract NASW-4367, 'Operation of a Technology Applications Team'. Through a period of significant change within NASA, the RTI Team has maintained its focus on helping NASA establish partnerships with U.S. industry for dual use development and technology commercialization. Our emphasis has been on outcomes, such as licenses, industry partnerships and commercialization of technologies that are important to NASA in its mission of contributing to the improved competitive position of U.S. industry. RTI's ongoing commitment to quality and customer responsiveness has driven our staff to continuously improve our technology transfer methodologies to meet NASA's requirements. For example, RTI has emphasized the following areas: (1) Methodology For Technology Assessment and Marketing: RTI has developed an implemented effective processes for assessing the commercial potential of NASA technologies. These processes resulted from an RTI study of best practices, hands-on experience, and extensive interaction with the NASA Field Centers to adapt to their specific needs; (2) Effective Marketing Strategies: RTI surveyed industry technology managers to determine effective marketing tools and strategies. The Technology Opportunity Announcement format and content were developed as a result of this industry input. For technologies with a dynamic visual impact, RTI has developed a stand-alone demonstration diskette that was successful in developing industry interest in licensing the technology; and (3) Responsiveness to NASA Requirements: RTI listened to our customer (NASA) and designed our processes to conform with the internal procedures and resources at each NASA Field Center and the direction provided by NASA's Agenda for Change. This report covers the activities of the Research Triangle Institute Technology Applications Team for the period 1 October 1993 through 31 December 1994.

  10. Throughput Optimization of Continuous Biopharmaceutical Manufacturing Facilities.

    Science.gov (United States)

    Garcia, Fernando A; Vandiver, Michael W

    2017-01-01

    In order to operate profitably under different product demand scenarios, biopharmaceutical companies must design their facilities with mass output flexibility in mind. Traditional biologics manufacturing technologies pose operational challenges in this regard due to their high costs and slow equipment turnaround times, restricting the types of products and mass quantities that can be processed. Modern plant design, however, has facilitated the development of lean and efficient bioprocessing facilities through footprint reduction and adoption of disposable and continuous manufacturing technologies. These development efforts have proven to be crucial in seeking to drastically reduce the high costs typically associated with the manufacturing of recombinant proteins. In this work, mathematical modeling is used to optimize annual production schedules for a single-product commercial facility operating with a continuous upstream and discrete batch downstream platform. Utilizing cell culture duration and volumetric productivity as process variables in the model, and annual plant throughput as the optimization objective, 3-D surface plots are created to understand the effect of process and facility design on expected mass output. The model shows that once a plant has been fully debottlenecked it is capable of processing well over a metric ton of product per year. Moreover, the analysis helped to uncover a major limiting constraint on plant performance, the stability of the neutralized viral inactivated pool, which may indicate that this should be a focus of attention during future process development efforts. LAY ABSTRACT: Biopharmaceutical process modeling can be used to design and optimize manufacturing facilities and help companies achieve a predetermined set of goals. One way to perform optimization is by making the most efficient use of process equipment in order to minimize the expenditure of capital, labor and plant resources. To that end, this paper introduces a

  11. A Decision Support System for Managing a Diverse Portfolio of Technology Resources

    Science.gov (United States)

    Smith, J.

    2000-01-01

    This paper describes an automated decision support system designed to facilitate the management of a continuously changing portfolio of technologies as new technologies are deployed and older technologies are decommissioned.

  12. Commitment to Cybersecurity and Information Technology Governance: A Case Study and Leadership Model

    Science.gov (United States)

    Curtis, Scipiaruth Kendall

    2012-01-01

    The continual emergence of technologies has infiltrated government and industry business infrastructures, requiring reforming organizations and fragile network infrastructures. Emerging technologies necessitates countermeasures, commitment to cybersecurity and information technology governance for organization's survivability and sustainability.…

  13. Major transitions in information technology

    Science.gov (United States)

    Valverde, Sergi

    2016-01-01

    When looking at the history of technology, we can see that all inventions are not of equal importance. Only a few technologies have the potential to start a new branching series (specifically, by increasing diversity), have a lasting impact in human life and ultimately became turning points. Technological transitions correspond to times and places in the past when a large number of novel artefact forms or behaviours appeared together or in rapid succession. Why does that happen? Is technological change continuous and gradual or does it occur in sudden leaps and bounds? The evolution of information technology (IT) allows for a quantitative and theoretical approach to technological transitions. The value of information systems experiences sudden changes (i) when we learn how to use this technology, (ii) when we accumulate a large amount of information, and (iii) when communities of practice create and exchange free information. The coexistence between gradual improvements and discontinuous technological change is a consequence of the asymmetric relationship between complexity and hardware and software. Using a cultural evolution approach, we suggest that sudden changes in the organization of ITs depend on the high costs of maintaining and transmitting reliable information. This article is part of the themed issue ‘The major synthetic evolutionary transitions’. PMID:27431527

  14. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    1999-01-31

    FIU-HCET participated in an ICT meeting at Mound during the second week of December and presented a brief videotape of the testing of the Robotic Climber technology. During this meeting, FIU-HCET proposed the TechXtract technology for possible testing at Mound and agreed to develop a five-page proposal for review by team members. FIU-HCET provided assistance to Bartlett Inc. and General Lasertronics Corporation in developing a proposal for a Program Opportunity Notice (PON). The proposal was submitted by these companies on January 5, 1999. The search for new equipment dismantlement technologies is continuing. The following vendors have responded to requests for demonstration: LUMONICS, Laser Solutions technology; CRYO-BEAM, Cryogenic cutting technology; Waterjet Technology Association, Waterjet Cutting technology; and DIAJET, Waterjet Cutting technology. Based on the tasks done in FY98, FIU-HCET is working closely with Numatec Hanford Corporation (NHC) and Pacific Northwest National Laboratory (PNNL) to revise the plan and scope of work of the pipeline plugging project in FY99, which involves activities of lab-scale flow loop experiments and a large-scale demonstration test bed.

  15. Advanced space transportation technologies

    Science.gov (United States)

    Raj, Rishi S.

    1989-01-01

    A wide range of propulsion technologies for space transportation are discussed in the literature. It is clear from the literature review that a single propulsion technology cannot satisfy the many mission needs in space. Many of the technologies tested, proposed, or in experimental stages relate to: chemical and nuclear fuel; radiative and corpuscular external energy source; tethers; cannons; and electromagnetic acceleration. The scope and limitation of these technologies is well tabulated in the literature. Prior experience has shown that an extensive amount of fuel needs to be carried along for the return mission. This requirement puts additional constraints on the lift off rocket technology and limits the payload capacity. Consider the possibility of refueling in space. If the return fuel supply is guaranteed, it will not only be possible to lift off more payload but also to provide security and safety of the mission. Exploration to deep space where solar sails and thermal effects fade would also be possible. Refueling would also facilitate travel on the planet of exploration. This aspect of space transportation prompts the present investigation. The particle emissions from the Sun's corona will be collected under three different conditions: in space closer to the Sun, in the Van Allen Belts; and on the Moon. It is proposed to convert the particle state into gaseous, liquid, or solid state and store it for refueling space vehicles. These facilities may be called space pump stations and the fuel collected as space fuel. Preliminary estimates of fuel collection at all three sites will be made. Future work will continue towards advancing the art of collection rate and design schemes for pumping stations.

  16. Smart Technology Applications in Business Environments

    NARCIS (Netherlands)

    Issa, Tomayess; Kommers, Petrus A.M.; Issa, Theodora; Isaías, Pedro; Issa, Touma B.

    2017-01-01

    Technology continues to make great strides in society by providing opportunities for advancement, inclusion, and global competency. As new systems and tools arise, novel applications are created as well. Smart Technology Applications in Business Environments is an essential reference source for the

  17. Antientropicity of technology: Role of resources

    Energy Technology Data Exchange (ETDEWEB)

    Biondi, L.; Galli, R. (Milan Univ. (Italy))

    1992-12-01

    The effect of technology is assessed as antientropic referring to the system of usable material and energy resources. The technological system would be considered in physics as open because of the continuous inventions of 'reserves', through transformation from the larger field of resources.

  18. Technological Literacy: A Multiliteracies Approach for Democracy

    Science.gov (United States)

    Williams, P. John

    2009-01-01

    Throughout history various grand narratives have impacted on technology education. In the current post modern era of globalization, technology education continues to struggle for relevance and definition, and takes various forms in different countries, but none seem resoundingly successful. The current development of what some have termed a…

  19. BUSINESS MODELS FOR INCREASING TECHNOLOGICAL TRANSFER EFFECTIVENESS

    Directory of Open Access Journals (Sweden)

    Simina FULGA

    2016-05-01

    Full Text Available The present paper is devoted to analyze the appropriate recommendations to increase the effectiveness of technology transfer organizations (centers from ReNITT, by using the specific instruments of Business Model Canvas, associated to the technological transfer value chain for the value added services addressed to their clients and according to a continuously improved competitive strategy over competition analysis.

  20. Our Continuing Program of Optical Color Measurements of Centaurs and KBOs

    Science.gov (United States)

    Romanishin, W.; Tegler, S. C.; Consolmagno, G. J.

    2012-05-01

    We report on our continuing program of BVR color measurement of Centaurs and KBOs. Most of our measurements have been made with the Vatican Advanced Technology Telescope (VATT). We report of new colors obtained through October 2011.