WorldWideScience

Sample records for technology conference part

  1. Mediterranean Conference on Information & Communication Technologies 2015

    CERN Document Server

    Choubani, Fethi; Moussati, Ali

    2016-01-01

    This volume presents the first part of the proceedings of the Mediterranean Conference on Information & Communication Technologies (MedICT 2015), which was held at Saidia, Morocco during 7–9 May, 2015. MedICT provides an excellent international forum to the researchers and practitioners from both academia as well as industry to meet and share cutting-edge development. The conference has also a special focus on enabling technologies for societal challenges, and seeks to address multidisciplinary challenges in Information & Communication Technologies such as health, demographic change, wellbeing, security and sustainability issues. The proceedings publish high quality papers which are closely related to the various theories, as well as emerging and practical applications of particular interest to the ICT community. This first volume provides a compact yet broad view of recent developments in devices, technologies and processing, and covers recent research areas in the field including Microwave Devices...

  2. 20. AINSE plasma science and technology conference. Conference handbook

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    The 20th AINSE plasma science and technology conference was held at Flinders University of South Australia on 13-14 February 1995. Topics under discussion included plasma physics studies, current status of rotamak devices, plasma processing and material studies. The handbook contains the conference program, 54 abstracts and a list of participants.

  3. 2015 International Conference on Information Technology and Intelligent Transportation Systems

    CERN Document Server

    Jain, Lakhmi; Zhao, Xiangmo

    2017-01-01

    This volume includes the proceedings of the 2015 International Conference on Information Technology and Intelligent Transportation Systems (ITITS 2015) which was held in Xi’an on December 12-13, 2015. The conference provided a platform for all professionals and researchers from industry and academia to present and discuss recent advances in the field of Information Technology and Intelligent Transportation Systems. The presented information technologies are connected to intelligent transportation systems including wireless communication, computational technologies, floating car data/floating cellular data, sensing technologies, and video vehicle detection. The articles focusing on intelligent transport systems vary in the technologies applied, from basic management systems to more application systems including topics such as emergency vehicle notification systems, automatic road enforcement, collision avoidance systems and some cooperative systems. The conference hosted 12 invited speakers and over 200 part...

  4. 3rd International Conference on Multimedia Technology

    CERN Document Server

    Yang, Jian; Jiao, Feng

    2014-01-01

    Proceedings of the 3rd International Conference on Multimedia Technology (ICMT2013) focuses on both the theory and applications of multimedia technology. The recent advances, new research findings and applications in the fields of theoretical, experimental and applied image & video processing and multimedia technology presented at the conference are brought together in this book. It will serve as a valuable reference for scientists and engineers working in multimedia and related fields. Prof. Aly A. Farag works at the University of Louisville, USA; Prof. Jian Yang works at Tsinghua University, China; Dr. Feng Jiao works at Nanjing University of Information Science & Technology, China.

  5. 13th International Conference on Information Technology

    CERN Document Server

    2016-01-01

    This book collects articles presented at the 13th International Conference on Information Technology- New Generations, April, 2016, in Las Vegas, NV USA. It includes over 100 chapters on critical areas of IT including Web Technology, Communications, Security, and Data Mining.

  6. The Technology Enhanced Conference - A Board Game!

    DEFF Research Database (Denmark)

    Pedersen, Annette

    ITMEDIA at the University of Copenhagen have been working with taking the academic conference online for years. Streaming events, using backchannel chat systems and Twitter, producing introductory pre-event videos, setting up audio debates with keynotes to enrich and prolong the conference...... been great, and maybe the board game can be used for other areas, where one needs to communicate complicated options for technology enhanced events or teaching and support organizers in making good choices....

  7. The Technology Enhanced Conference - A Board Game!

    DEFF Research Database (Denmark)

    Pedersen, Annette

    , and the sharing of knowledge beyond the event days. But how can we help the organizers and participants realize the potential of an interactive conference? Because let's face it: the easier choice is to leave out the technology enhancement and stick with the well-known conference format. We came up with a visual...... been great, and maybe the board game can be used for other areas, where one needs to communicate complicated options for technology enhanced events or teaching and support organizers in making good choices....

  8. 2016 37th International Conference Information Systems Architecture and Technology

    CERN Document Server

    Grzech, Adam; Świątek, Jerzy; Wilimowska, Zofia

    2017-01-01

    This four volume set of books constitutes the proceedings of the 2016 37th International Conference Information Systems Architecture and Technology (ISAT), or ISAT 2016 for short, held on September 18–20, 2016 in Karpacz, Poland. The conference was organized by the Department of Management Systems and the Department of Computer Science, Wrocław University of Science and Technology, Poland. The papers included in the proceedings have been subject to a thorough review process by highly qualified peer reviewers. The accepted papers have been grouped into four parts: Part I—addressing topics including, but not limited to, systems analysis and modeling, methods for managing complex planning environment and insights from Big Data research projects. Part II—discoursing about topics including, but not limited to, Web systems, computer networks, distributed computing, and mulit-agent systems and Internet of Things. Part III—discussing topics including, but not limited to, mobile and Service Oriented Architect...

  9. 36th International Conference on Information Systems Architecture and Technology

    CERN Document Server

    Grzech, Adam; Świątek, Jerzy; Wilimowska, Zofia

    2016-01-01

    This four volume set of books constitutes the proceedings of the 36th International Conference Information Systems Architecture and Technology 2015, or ISAT 2015 for short, held on September 20–22, 2015 in Karpacz, Poland. The conference was organized by the Computer Science and Management Systems Departments, Faculty of Computer Science and Management, Wroclaw University of Technology, Poland. The papers included in the proceedings have been subject to a thorough review process by highly qualified peer reviewers. The accepted papers have been grouped into four parts: Part I—addressing topics including, but not limited to, systems analysis and modeling, methods for managing complex planning environment and insights from Big Data research projects. Part II—discoursing about topics including, but not limited to, Web systems, computer networks, distributed computing, and multi-agent systems and Internet of Things. Part III—discussing topics including, but not limited to, mobile and Service Oriented Archi...

  10. International Conference on Mobile and Wireless Technology

    CERN Document Server

    Wattanapongsakorn, Naruemon; Joukov, Nikolai

    2016-01-01

    This book presents the peer-reviewed contributions of ICMWT2016, an international conference devoted to mobile and wireless technology. Researchers and professionals from academia and industry met to discuss the cutting-edge developments in the field. The book includes papers on mobile and wireless networks, the increasingly important security issues, data management, as well as the latest developments in mobile software development.

  11. 7th International Conference on Sensing Technology

    CERN Document Server

    Mukhopadhyay, Subhas; Jayasundera, Krishanthi

    2015-01-01

    This book contains a collection of selected works stemming from the 2013 International Conference on Sensing Technology (ICST), which was held in Wellington, New Zealand. The purpose of the book is to distill the highlights of the conference, and therefore track the latest developments in sensing technologies. The book contents are broad, since sensors can be applied in many different areas. Therefore the book gives a broad overview of the latest developments, in addition to discussing the process through which researchers go through in order to develop sensors, or related systems, which will become more widespread in the future.The book is written for academic and industry professionals working in the field of sensing, instrumentation and related fields, and is positioned to give a snapshot of the current state of the art in sensing technology, particularly from the applied perspective. 

  12. 5th International Conference OTEH 2012 - defense technology (Proceedings review)

    OpenAIRE

    Vlado Petar Đurković

    2013-01-01

    This article gives an overview of all papers and events at the Fifth International ScientificConference on Defense Technologies OTEH 2012 held in Belgrade, in the Military Technical Institute (VTI), from 18th to 19th September 2012.The paper review presents the Conference Sections by subjects and guest-lectureres as well as the institutions of all authors who actively participated at the Conference.About the ConferenceThe Fifth International Scientific Conference on Defense Technologies OTEH ...

  13. 11th International Conference on Computing and Information Technology

    CERN Document Server

    Meesad, Phayung; Boonkrong, Sirapat

    2015-01-01

    This book presents recent research work and results in the area of communication and information technologies. The book includes the main results of the 11th International Conference on Computing and Information Technology (IC2IT) held during July 2nd-3rd, 2015 in Bangkok, Thailand. The book is divided into the two main parts Data Mining and Machine Learning as well as Data Network and Communications. New algorithms and methods of data mining asr discussed as well as innovative applications and state-of-the-art technologies on data mining, machine learning and data networking.

  14. International Conference on Mechanical Engineering and Technology

    CERN Document Server

    Mechanical Engineering and Technology

    2012-01-01

    The volume includes a set of selected papers extended and revised from the 2011 International Conference on Mechanical Engineering and Technology, held on London, UK, November 24-25, 2011.   Mechanical engineering technology is the application of physical principles and current technological developments to the creation of useful machinery and operation design. Technologies such as solid models may be used as the basis for finite element analysis (FEA) and / or computational fluid dynamics (CFD) of the design. Through the application of computer-aided manufacturing (CAM), the models may also be used directly by software to create "instructions" for the manufacture of objects represented by the models, through computer numerically controlled (CNC) machining or other automated processes, without the need for intermediate drawings.   This volume covers the subject areas of mechanical engineering and technology, and also covers interdisciplinary subject areas of computers, communications, control and automation...

  15. Major Conference about Astronomical Technology in Munich

    Science.gov (United States)

    2000-03-01

    Press Conference on Monday, March 27, 2000 Which are the latest astronomical discoveries made with the new 8-10 metre class astronomical telescopes? Will it be possible to construct even more powerful instruments on the ground and in space to explore the near and distant Universe at all wavelengths from gamma-rays to radio waves? Which research areas in this dynamical science are likely to achieve break-throughs with emerging new technologies? These are some of the central themes that will be discussed by more than 600 specialists from all over the world at an international conference in Munich (Germany), "Astronomical Telescopes and Instruments 2000" , beginning on Monday, March 27, 2000. During five days, the modern architecture of the new International Congress Center in the Bavarian capital will be the scene of lively exchanges about recent progress at the world's top-class astronomical research facilities and the presentation of inspired new ideas about future technological opportunities. The conference will be accompanied by numerous on-site exhibition stands by the major industries and research organisations in this wide field. This meeting is the latest in a series, organised every second year, alternatively in the USA and Europe by the International Society for Optical Engineering (SPIE) , this year with the European Southern Observatory (ESO) as co-sponsor and host institution. The conference will be opened in the morning of March 27 by the Bavarian Minister of Science, Research and Arts, Hans Zehetmair . His address will be followed by keynote speeches by Massimo Tarenghi (European Southern Observatory), James B. Breckenridge (National Science Foundation, USA), Harvey Butcher (Netherlands Foundation for Research in Astronomy) and Albrecht Ruediger (Max Planck Institut für Quantenoptik, Germany). The conference is subtitled "Power Telescopes and Instrumentation into the New Millennium" and will be attended by leading scientists and engineers from all

  16. 12th International Conference on Computing and Information Technology

    CERN Document Server

    Boonkrong, Sirapat; Unger, Herwig

    2016-01-01

    This proceedings book presents recent research work and results in the area of communication and information technologies. The chapters of this book contain the main, well-selected and reviewed contributions of scientists who met at the 12th International Conference on Computing and Information Technology (IC2IT) held during 7th - 8th July 2016 in Khon Kaen, Thailand The book is divided into three parts: “User Centric Data Mining and Text Processing”, “Data Mining Algoritms and their Applications” and “Optimization of Complex Networks”.

  17. Information and Communication Technologies Innovations conference

    CERN Document Server

    Kocarev, Ljupco

    2012-01-01

    Information and Communication Technologies has enlarged its horizon and it is practiced under multidisciplinary contexts that introduce new challenges to theoretical and technical approaches. The most critical benefit of introducing new ICT technologies in our real world living are the new ways of working that the online world makes possible. Complexity, uncertainty and scaling issues of real world problems as well as natural phenomena in ecology, medicine and biology demanding ICT assistance create challenging application domains for artificial intelligence, decision support and intelligence systems, wireless sensor networks, pervasive and ubiquitous computing, multimedia information systems, data management systems, internet and web applications and services, computer networks, security and cryptography, distributed systems, GRID and cloud computing. This book offers a collection of papers presented at the Third International Conference on ICT Innovations held in September 2011, in Skopje, Macedonia. The co...

  18. Third annual women in science and technology conference

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-31

    This report presents discussions presented at the conference for women in science and technology. Topics include balancing careers with the family, choices concerning graduate schools, and sexual harassment.

  19. Third annual women in science and technology conference

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    This report presents discussions presented at the conference for women in science and technology. Topics include balancing careers with the family, choices concerning graduate schools, and sexual harassment.

  20. National conference on environmental remediation science and technology: Abstracts

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    This conference was held September 8--10, 1998 in Greensboro, North Carolina. The purpose of this conference was to provide a multidisciplinary forum for exchange of state-of-the-art information on methods and site characterization technologies for environmental monitoring and remedial action planning of hazardous materials. This report contains the abstracts of sixty-one papers presented at the conference.

  1. 5th International Conference OTEH 2012 - defense technology (Proceedings review

    Directory of Open Access Journals (Sweden)

    Vlado Petar Đurković

    2013-02-01

    Full Text Available This article gives an overview of all papers and events at the Fifth International ScientificConference on Defense Technologies OTEH 2012 held in Belgrade, in the Military Technical Institute (VTI, from 18th to 19th September 2012.The paper review presents the Conference Sections by subjects and guest-lectureres as well as the institutions of all authors who actively participated at the Conference.About the ConferenceThe Fifth International Scientific Conference on Defense Technologies OTEH 2012  was held in Belgrade in the Military Technical Institute in Žarkovo, from 18th to 19thSeptember 2012..The Conference program was organized in two plenary sessions and a working part which took place in four halls.In the plenary session, two key lectures were held by eminent experts from abroad. The first lecture entitled „An adaptive remeshing technique for 3D crack growth simulations”, was given by Dr Vincent Chiaruttini (ONERA Institute, Paris, France. The second one, „New Technologies for Advanced Defence Systems”, was held by Dr Filippo Neri (Virtualabs Company, Rome, Italy.Fifteen sessions were organised at the Conference. The authors presented their works in open discussions answering questions from the audience. The average number of attendees at each session was about 40.The papers were sorted by topic areas:Aerodynamics and flight dynamics: 12 papersAircraft: 23 papersWeapon systems, ammunition, energy materials, combat vehicles: 29 papersIntegrated sensor systems and robotic systems: 16 papersTelecommunication and information systems: 18 papersMaterials and technologies: 34 papersQuality, standardization, metrology, maintenance and exploitation: 11 papersOut of 163 submitted papers for this Conference, 145 papers were accepted and distributed in an electronic form on CDs to the present authors, co-authors, guests and invitees to the Conference. The number of participants with authors and co-authors was impressive - 243. The

  2. 3rd International Conference on Photonics, Optics and Laser Technology

    CERN Document Server

    Raposo, Maria

    2016-01-01

    The book provides a collection of selected papers presented to the third International Conference on Photonics, Optics and Laser Technology PHOTOPTICS 2015, covering the three main conference scientific areas of “Optics”, “Photonics” and “Lasers”. The selected papers, in two classes full and short, result from a double blind review carried out by the conference program committee members which are highly qualified experts in conference topic areas.

  3. 2nd International Conference on Photonics, Optics and Laser Technology

    CERN Document Server

    Raposo, Maria

    2016-01-01

    This collection of the selected papers presented to the Second International Conference on Photonics, Optics and laser technology PHOTOPTICS 2014 covers the three main conference scientific areas of “Optics”, “Photonics” and “Lasers”. The selected papers, in two classes full and short, result from a double blind review carried out by conference Program Committee members who are highly qualified experts in the conference topic areas.

  4. The 9th international conference on computing and information technology

    CERN Document Server

    Unger, Herwig; Boonkrong, Sirapat; IC2IT2013

    2013-01-01

    This volume contains the papers of the 9th International Conference on Computing and Information Technology (IC2IT 2013) held at King Mongkut's University of Technology North Bangkok (KMUTNB), Bangkok, Thailand, on May 9th-10th, 2013. Traditionally, the conference is organized in conjunction with the National Conference on Computing and Information Technology, one of the leading Thai national events in the area of Computer Science and Engineering. The conference as well as this volume is structured into 3 main tracks on Data Networks/Communication, Data Mining/Machine Learning, and Human Interfaces/Image processing.  

  5. Conference scene: pharmacogenomics: from cell to clinic (part 2).

    Science.gov (United States)

    Siest, Gérard; Medeiros, Rui; Melichar, Bohuslav; Stathopoulou, Maria; Van Schaik, Ron Hn; Cacabelos, Ramon; Abt, Peter Meier; Monteiro, Carolino; Gurwitz, David; Queiroz, Jao; Mota-Filipe, Helder; Ndiaye, Ndeye Coumba; Visvikis-Siest, Sophie

    2014-04-01

    Second International ESPT Meeting Lisbon, Portugal, 26-28 September 2013 The second European Society of Pharmacogenomics and Theranostics (ESPT) conference was organized in Lisbon, Portugal, and attracted 250 participants from 37 different countries. The participants could listen to 50 oral presentations, participate in five lunch symposia and were able to view 83 posters and an exhibition. Part 1 of this Conference Scene was presented in the previous issue of Pharmacogenomics. This second part will focus on: clinical implementation of pharmacogenomics tests; transporters and pharmacogenomics; stem cells and other new tools for pharmacogenomics and drug discovery; from system pharmacogenomics to personalized medicine; and, finally, we will discuss the Posters and Awards that were presented at the conference.

  6. 76 FR 52670 - 2011 Technology Transfer Summit North America Conference

    Science.gov (United States)

    2011-08-23

    ... HUMAN SERVICES National Institutes of Health 2011 Technology Transfer Summit North America Conference...: The NIH Office of Technology Transfer extends invitations to attend the 2011 Technology Transfer... by the NIH Office of Technology Transfer, TTS Ltd. and regional host partners such as BIO Maryland...

  7. Conference on "Mathematical Technology of Networks"

    CERN Document Server

    2015-01-01

    Bringing together leading researchers in the fields of functional analysis, mathematical physics and graph theory, as well as natural scientists using networks as a tool in their own research fields, such as neuroscience and machine learning, this volume presents recent advances in functional, analytical, probabilistic, and spectral aspects in the study of graphs, quantum graphs, and complex networks. The contributors to this volume explore the interplay between theoretical and applied aspects of discrete and continuous graphs. Their work helps to close the gap between different avenues of research on graphs, including metric graphs and ramified structures. All papers were presented at the conference "Mathematical Technology of Networks," held December 4–7, 2013 at the Zentrum für interdisziplinäre Forschung (ZiF) in Bielefeld, Germany, and are supplemented with detailed figures illustrating both abstract concepts as well as their real-world applications. Dynamical models on graphs or random graphs a...

  8. PREFACE: 7th International Conference on Cooling & Heating Technologies (ICCHT 2014)

    Science.gov (United States)

    2015-09-01

    The Kyoto protocol has initiated a pledge from almost all developing and developed countries to be committed to reducing CO2 emissions. Development of new renewable energy technologies are also of interest in this conference. Greenhouse gases have contributed to global warming and other man-made disasters. Cooling and Heating communities also have responsibilities towards the commitment of reducing the greenhouse gas emissions. In addition, depleting natural resources also act as a threat to the Cooling and Heating industries, causing them to develop highly efficient equipment and innovative technologies. The 1st International Conference on Cooling & Heating Technologies was held in Hanoi Vietnam (Jan. 2005). Whereas the 2nd, 3rd, 4th and 5th ICCHT conferences were held in Dalian, China (Jul. 2006), Tokyo, Japan (Jul. 2007), Jinhae, Korea (Oct. 2008) and Bandung, Indonesia (Dec. 2010) respectively. The 6th International Conference on Cooling & Heating Technologies (ICCTH2012) was held in Xi'an in China on November 9-12, 2012. It is our pleasure to welcome you to the 7th International Conference on Cooling & Heating Technologies (ICCTH2014) on 4th - 6th November 2014 at the Grand Dorsett Subang Hotel, Subang Jaya, Selangor Darul Ehsan, Malaysia The Theme of the Conference is ''Sustainability and Innovation in Heating & Cooling Technologies''. The sub-themes are:- • CO2 Reduction and Low Carbon Technologies • HVAC System and Natural Ventilation • Energy & Alternative Energy • Computational Fluid Dynamics • Low Temperature & Refrigeration Engineering In conjunction with the Conference, an Exhibition will be organized as an integral part of the Conference. Project experiences, product solutions, new applications and state-of-the art information will be highlighted.

  9. PROCEEDINGS OF THE 1998 OIL HEAT TECHNOLOGY CONFERENCE

    Energy Technology Data Exchange (ETDEWEB)

    MCDONALD,R.J.

    1998-04-01

    The 1998 Oil Heat Technology Conference will be held on April 7--8 at Brookhaven National Laboratory (BNL) under sponsorship by the US Department of Energy, Office of Building Technologies, State and Community Programs (DOE/BTS). The meeting will be held in cooperation with the Petroleum Marketers Association of America (PMAA). The 1998 Oil Heat Technology Conference, will be the twelfth since 1984, is an important technology transfer activity and is supported by the ongoing Combustion Equipment Technology (Oilheat R and D) program at BNL. The reason for the conference is to provide a forum for the exchange of information and perspectives among international researchers, engineers, manufacturers and marketers of oil-fired space-conditioning equipment. They will provide a channel by which information and ideas can be exchanged to examine present technologies, as well as helping to develop the future course for oil heating advancement. These conferences also serve as a stage for unifying government representatives, researchers, fuel oil marketers, and other members of the oil-heat industry in addressing technology advancements in this important energy use sector. The specific objectives of the Conference are to: (1) Identify and evaluate the current state-of-the-art and recommend new initiatives for higher efficiency, a cleaner environment, and to satisfy consumer needs cost-effectively, reliably, and safely; and (2) Foster cooperative interactions among federal and industrial representatives for the common goal of sustained economic growth and energy security via energy conservation.

  10. Proceedings of the 1991 Oil Heat Technology Conference and Workshop

    Energy Technology Data Exchange (ETDEWEB)

    McDonald, R.J.

    1992-07-01

    This Conference, which was the sixth held since 1984, is a key technology-transfer activity supported by the ongoing Combustion Equipment Technology program at BNL, and is aimed at providing a forum for the exchange of information among international researchers, engineers, manufacturers, and marketers of oil-fired space-conditioning equipment. The objectives of the Conference were to: Identify and evaluate the state-of-the-art and recommend; new initiatives to satisfy consumer needs cost-effectively, reliably, and safely; Foster cooperation among federal and industrial representatives with the common goal of national security via energy conservation. The 1991 Oil Technology Conference comprised: (a) two plenary sessions devoted to presentations and summations by public and private sector representatives from the United States, Europe, and Canada; and, (b) four workshops which focused on mainstream issues in oil-heating technology. Selected papers have been processed separately for inclusion in the Energy Science and Technology Database.

  11. 2016 China Academic Conference on Printing, Packaging Engineering & Media Technology

    CERN Document Server

    Ouyang, Yun; Xu, Min; Yang, Li; Ouyang, Yujie

    2017-01-01

    This book includes a selection of reviewed papers presented at the 2016 China Academic Conference on Printing, Packaging Engineering & Media Technology, held on November 25-27, 2016 in Xi’an, China. The conference was jointly organized by China Academy of Printing Technology, Xi’an University of Technology and Stuttgart Media University of Germany. The proceedings cover the recent outcomes on color science and technology, image processing technology, digital media technology, digital process management technology in packaging and packaging etc. They will be of interest to university researchers, R&D engineers and graduate students in graphic communications, packaging, color science, image science, material science, computer science, digital media and network technology fields.

  12. Proceedings of the 1995 oil heat technology conference and workshop

    Energy Technology Data Exchange (ETDEWEB)

    McDonald, R.J.

    1995-04-01

    This report documents the Proceedings of the 1995 Oil Heat Technology Conference and Workshop, held on March 22-23 at Brookhaven National Laboratory (BNL), and sponsored by the U.S. Department of Energy - Office of Building Technologies (DOE-OBT), in cooperation with the Petroleum Marketers Association of America. This Conference, which was the ninth held since 1984, is a key technology transfer activity supported by the ongoing Combustion Equipment Technology (Oil-Heat R&D) program at BNL, and is aimed at providing a forum for the exchange of information among international researchers, engineers, manufacturers, and marketers of oil-fired space-conditioning equipment. The objectives of the Conference were to: (1) Identify and evaluate the state-of-the-art and recommend new initiatives for higher efficiency, a cleaner environment, and to satisfy consumer needs cost-effectively, reliably, and safely; (2) Foster cooperation among federal and industrial representatives with the common goal of sustained national economic growth and energy security via energy conservation. The 1995 Oil Technology Conference comprised: (a) three plenary sessions devoted to presentations and summations by public and private sector industry representatives from the United States, and Canada, and (b) four workshops which focused on mainstream issues in oil-heating technology. Individual reports presented at the conference have been processed separately for database entry.

  13. 4th International Conference on Applied Computing and Information Technology

    CERN Document Server

    2017-01-01

    This edited book presents scientific results of the 4th International Conference on Applied Computing and Information Technology (ACIT 2016) which was held on December 12–14, 2016 in Las Vegas, USA. The aim of this conference was to bring together researchers and scientists, businessmen and entrepreneurs, teachers, engineers, computer users, and students to discuss the numerous fields of computer science and to share their experiences and exchange new ideas and information in a meaningful way. The aim of this conference was also to bring out the research results about all aspects (theory, applications and tools) of computer and information science, and to discuss the practical challenges encountered along the way and the solutions adopted to solve them. The conference organizers selected the best papers from those papers accepted for presentation at the conference. The papers were chosen based on review scores submitted by members of the Program Committee, and underwent further rigorous rounds of review. Th...

  14. Proceedings of the Sixth International Conference on Advanced Learning Technologies

    NARCIS (Netherlands)

    Kinshuk; Koper, Rob; Kommers, Piet; Kirschner, Paul A.; Sampson, Demetrios; Didderen, Wim

    2006-01-01

    Kinshuk, Koper, R., Kommers, P., Kirschner, P., Sampson, D. G., & Didderen, W. (Eds.) (2006). Advanced Technologies for Life-Long Learning. Proceedings of the 6th IEEE International Conference on Advanced Learning Technologies 2006. July, 5-7, 2006, Kerkrade, The Netherlands. Los Alamitos, CA: IEEE

  15. EU-Korea Conference on Science and Technology

    CERN Document Server

    Lee, Jehyun

    2011-01-01

    Current research fields in science and technology were presented and discussed at the EKC2009, informing about the interests and directions of the scientists and engineers in EU countries and Korea. The Conference has emerged from the idea of bringing together EU and Korea to get to know each other better, especially in fields of science and technology.

  16. International Conference on Information Technology and Agricultural Engineering (ICITAE 2011)

    CERN Document Server

    Sambath, Sabo; Information Technology and Agricultural Engineering

    2012-01-01

    This volume comprises the papers from 2011 International Conference on Information Technology and Agricultural Engineering (ICITAE 2011).  2011 International Conference on Information Technology and Agricultural Engineering (ICITAE 2011) has been held in Sanya, China, December 1-2, 2011. All the papers have been peer reviewed by the selected experts. These papers represent the latest development in the field of materials manufacturing technology, spanning from the fundamentals to new technologies and applications. Specially, these papers cover the topics of Information Technology and Agricultural Engineering. This book provides a greatly valuable reference for researchers in the field of Information Technology and Agricultural Engineering who wish to further understand the underlying mechanisms and create innovative and practical techniques, systems and processes. It should also be particularly useful for engineers in information technology and agriculture who are responsible for the efficient and effective ...

  17. PROCEEDINGS OF THE 1999 OIL HEAT TECHNOLOGY CONFERENCE AND WORKSHOP.

    Energy Technology Data Exchange (ETDEWEB)

    MCDONALD,R.J.

    1999-04-01

    The 1999 Oil Heat Technology Conference and Workshop, April 15-16 at Brookhaven National Laboratory (BNL) is sponsored by the U. S. Department of Energy, Office of Building Technology, State and Community Programs (DOEBTS). The meeting is also co-sponsored by the: Petroleum Marketers Association of America, New England Fuel Institute, Oilheat Manufacturers Association, National Association of Oil Heat Service Managers, New York State Energy Research and Development Authority, Empire State Petroleum Association, New York Oil Heating Association, Oil Heat Institute of Long Island, and the Pennsylvania Petroleum Association. BNL is proud to acknowledge all of our 1999 co-sponsors, without their help and support the conference would have been canceled due to budget restrictions. It is quite gratifying to see an industry come together to help support an activity like the technology conference, for the benefit of the industry as a whole. The 1999 Oil Heat Technology Conference and Workshop, will be the thirteenth since 1984, is a very valuable technology transfer activity supported by the ongoing Combustion Equipment Technology (Oilheat R and D) program at BNL. The foremost reason for the conference is to provide a platform for the exchange of information and perspectives among international researchers, engineers, manufacturers, service technicians, and marketers of oil-fired space-conditioning equipment. They will provide a conduit by which information and ideas can be exchanged to examine present technologies, as well as helping to develop the future course for oil heating advancement. These conferences also serve as a stage for unifying government representatives, researchers, fuel oil marketers, and other members of the oil-heat industry in addressing technology advancements in this important energy use sector.

  18. 7th KES International Conference on Intelligent Decision Technologies

    CERN Document Server

    Jain, Lakhmi; Howlett, Robert

    2015-01-01

    This book presents the 57 papers accepted for presentation at the Seventh KES International Conference on Intelligent Decision Technologies (KES-IDT 2015), held in Sorrento, Italy, in June 2015. The conference consists of keynote talks, oral and poster presentations, invited sessions and workshops on the applications and theory of intelligent decision systems and related areas. The conference provides an opportunity for the presentation and discussion of interesting new research results, promoting knowledge transfer and the generation of new ideas. The book will be of interest to all those whose work involves the development and application of intelligent decision systems.

  19. 2015 Federated Conference on Software Development and Object Technologies

    CERN Document Server

    Kostolny, Jozef; Gratkowski, Tomasz

    2017-01-01

    This book presents the proceedings of the International Conference SDOT which was organized at the University in Žilina, Faculty of Management Sciences and Informatics, Slovak Republic in November 19, 2015. The conference was truly international both in terms of the amount of foreign contributions and in terms of composition of steering and scientific committees. The book and the conference serves as a platform of professional exchange of knowledge and experience for the latest trends in software development and object-oriented technologies (theory and practice). This proceedings present information on the latest developments and mediate the exchange of experience between practitioners and academia. .

  20. Visions for a sustainable world: A conference on science, technology and social responsibility. Conference report

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-31

    This report summarizes the organization, activities, and outcomes of Student Pugwash USA`s 1992 International Conference, Visions for a Sustainable World: A Conference on Science, Technology and Social Responsibility. The conference was held June 14--20, 1992 at Emory University, and brought together 94 students and over 65 experts from industry, academe, and government. The conference addressed issues ranging from global environmental cooperation to the social impacts of the Human Genome Project to minority concerns in the sciences. It provided a valuable forum for talented students and professionals to engage in critical dialogue on many interdisciplinary issues at the juncture of science, technology and society. The conference challenged students -- the world`s future scientists, engineers, and political leaders -- to think broadly about global problems and to devise policy options that are viable and innovative. The success of the conference in stimulating interest, understanding, and enthusiasm about interdisciplinary global issues is clearly evident from both the participants` feedback and their continued involvement in Student Pugwash USA programs. Six working groups met each morning. The working group themes included: environmental challenges for developing countries; energy options: their social and environmental impact; health care in developing countries; changing dynamics of peace and global security; educating for the socially responsible use of technology; ethics and the use of genetic information. The conference was specifically designed to include mechanisms for ensuring its long-term impact. Participants were encouraged to focus on their individual role in helping resolve global issues. This was achieved through each participant`s development of a Personal Plan of Action, a plan which mapped out activities the student could undertake after the conference to continue the dialogue and work towards the resolution of global and local problems.

  1. Proceedings of the 1997 oil heat technology conference and workshop

    Energy Technology Data Exchange (ETDEWEB)

    McDonald, R.J.

    1997-09-01

    This report documents the Proceedings of the 1997 Oil Heat Technology Conference and Workshop, held on April 3--4 at Brookhaven National Laboratory (BNL), and sponsored by the US Department of Energy--Office of Building Technologies, State and Community programs (DOE-BTS), in cooperation with the Petroleum Marketers Association of America (PMAA). This Conference is a key technology transfer activity supported by the ongoing Combustion Equipment Technology (Oil-Heat R and D) program at BNL, and is aimed at providing a forum for the exchange of information among international researchers, engineers, manufacturers, and marketers of oil-fired space-conditioning equipment. The objectives of the Conference were to: identify and evaluate the state-of-the-art and recommend new initiatives for higher efficiency, a cleaner environment, and to satisfy consumer needs cost-effectively, reliably, and safely: and foster cooperation among federal and industrial representatives with the common goal of sustained national economic growth and energy security via energy conservation. The 1997 Oil Technology Conference comprised: (a) five plenary sessions devoted to presentations and summations by public and private sector industry representatives from the US, and Canada, and (b) four workshops which focused on mainstream issues in oil-heating technology. This book contains 14 technical papers and four summaries from the workshops. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  2. International Conference on Advances in Information and Communication Technology

    CERN Document Server

    Nguyen, Thanh-Thuy; Vu, Duc-Thai; Phung, Trung-Nghia; Huynh, Van-Nam

    2017-01-01

    This book features papers presented at the International Conference on Advances in Information and Communication Technology (ICTA 2016), which was held in Thai Nguyen city, Vietnam, from December 1 to 13, 2016. The conference was jointly organized by Thai Nguyen University of Information and Communication Technology (ICTU), the Institute of Information Technology – Vietnam Academy of Science and Technology (IoIT), Feng Chia University, Taiwan (FCU), the Japan Advanced Institute of Science and Technology (JAIST) and the National Chung Cheng University, Taiwan (CCU) with the aim of bringing together researchers, academics, practitioners and students to not only share research results and practical applications but also to foster collaboration in information and communication technology research and education. The book includes the 66 best peer-reviewed papers, selected from the 150 submissions received.

  3. Proceedings of the 3. international conference on light metals technology

    Energy Technology Data Exchange (ETDEWEB)

    Sadayappan, K.; Sahoo, M. [Natural Resources Canada, Ottawa, ON (Canada). CANMET Materials Technology Lab

    2007-07-01

    The third international conference on light metals technology was held to provide a forum for new technological developments as well as to provide an opportunity for government, university, and private-sector research to discuss future research collaborations. Issues related to alloy development and processing were discussed. Innovative, industrial applications of aluminum and magnesium alloys were also reviewed. Sessions included recent experimental and computational research related to light metals. The conference was divided into 7 themes : (1) alloy development; (2) casting; (3) enabling technologies; (4) forming; (5) new applications; (6) sustainability; and (7) titanium. The conference featured 59 presentations, of which 10 have been catalogued separately for inclusion in this database. refs., tabs., figs.

  4. Future Jet Technologies, Part C

    Science.gov (United States)

    Gal-Or, Benjamin

    2013-06-01

    This updated, PART C REVIEW, covers the dangerous global spread of JS-stealth, drone technology [1-91], canard-free, stealth, new agile drones and the highly debated, 480 billion F-35 International Program as reported on March 13, 2013 to the U.S. Congress [92]. Due to serious design issues, spiraling high costs and years in delays, alternatives are analyzed here, depicted and proposed, mainly from the propulsion-design point of view. These include fleets of low-cost, stealth, jet-steered-drones mixed with non-stealthy, low-cost, ready-to-be-delivered, U.S. or European or Russian fighter aircraft. Can a few F-35s win against large fleets of stealth agile drones? To understand the dangers and critical issues involved, the author's own, past classified information is partly disclosed, while resorting to images in Figs. 2(a) and 2(b) taken from his book [2] and from Wikipedia, the "Free Encyclopedia", in all other images.

  5. International Conference on Information and Communication Technology for Intelligent Systems

    CERN Document Server

    Das, Swagatam

    2016-01-01

    This volume contains 60 papers presented at ICTIS 2015: International Conference on Information and Communication Technology for Intelligent Systems. The conference was held during 28th and 29th November, 2015, Ahmedabad, India and organized communally by Venus International College of Technology, Association of Computer Machinery, Ahmedabad Chapter and Supported by Computer Society of India Division IV – Communication and Division V – Education and Research. This volume contains papers mainly focused on ICT and its application for Intelligent Computing, Cloud Storage, Data Mining, Image Processing and Software Analysis etc.

  6. Proceedings of the 1993 oil heat technology conference and workshop

    Energy Technology Data Exchange (ETDEWEB)

    McDonald, R.J.

    1993-09-01

    This report documents the proceedings of the 1993 Oil Heat Technology Conference and Workshop, held on March 25--26 at Brookhaven National Laboratory (BNL), and sponsored by the US Department of Energy - Office of Building Technologies (DOE-OBT), in cooperation with the Petroleum Marketers Association of America. This Conference, which was the seventh held since 1984, is a key technology-transfer activity supported by the ongoing Combustion Equipment Technology (Oil-Heat R&D) program at BNL, and is aimed at providing a forum for the exchange of information among international researchers, engineers, manufacturers, and marketers of oil-fired space- conditioning equipment. Selected papers have been processed separately for inclusion in the Energy Science and Technology Database.

  7. 2014 World Conference on Information Systems and Technologies

    CERN Document Server

    Correia, Ana; Tan, Felix; Stroetmann, Karl

    2014-01-01

    This book contains a selection of articles from The 2014 World Conference on Information Systems and Technologies (WorldCIST'14), held between the 15th and 18th of April in Funchal, Madeira, Portugal, a global forum for researchers and practitioners to present and discuss recent results and innovations, current trends, professional experiences and challenges of modern Information Systems and Technologies research, technological development and applications. The main topics covered are: Information and Knowledge Management; Organizational Models and Information Systems; Intelligent and Decision Support Systems; Software Systems, Architectures, Applications and Tools; Computer Networks, Mobility and Pervasive Systems; Radar Technologies; Human-Computer Interaction; Health Informatics; and Information Technologies in Education.

  8. 3rd International Conference on Intelligent Technologies and Engineering Systems

    CERN Document Server

    2016-01-01

    This book includes the original, peer reviewed research from the 3rd International Conference on Intelligent Technologies and Engineering Systems (ICITES2014), held in December, 2014 at Cheng Shiu University in Kaohsiung, Taiwan. Topics covered include: Automation and robotics, fiber optics and laser technologies, network and communication systems, micro and nano technologies, and solar and power systems. This book also Explores emerging technologies and their application in a broad range of engineering disciplines Examines fiber optics and laser technologies Covers biomedical, electrical, industrial, and mechanical systems Discusses multimedia systems and applications, computer vision and image & video signal processing.

  9. Commercial Parts Technology Qualification Processes

    Science.gov (United States)

    Cooper, Mark S.

    2013-01-01

    Many high-reliability systems, including space systems, use selected commercial parts (including Plastic Encapsulated Microelectronics or PEMs) for unique functionality, small size, low weight, high mechanical shock resistance, and other factors. Predominantly this usage is subjected to certain 100% tests (typically called screens) and certain destructive tests usually (but not always) performed on the flight lot (typically called qualification tests). Frequently used approaches include those documented in EEE-INST-002 and JPL DocID62212 (which are sometimes modified by the particular aerospace space systems manufacturer). In this study, approaches from these documents and several space systems manufacturers are compared to approaches from a launch systems manufacturer (SpaceX), an implantable medical electronics manufacturer (Medtronics), and a high-reliability transport system process (automotive systems). In the conclusions section, these processes are outlined for all of these cases and presented in tabular form. Then some simple comparisons are made. In this introduction section, the PEM technology qualification process is described, as documented in EEE-INST-002 (written by the Goddard Space Flight Center, GSFC), as well as the somewhat modified approach employed at the Jet Propulsion Laboratory (JPL). Approaches used at several major NASA contractors are also described

  10. 5th Conference on Aerospace Materials, Processes, and Environmental Technology

    Science.gov (United States)

    Cook, M. B. (Editor); Stanley, D. Cross (Editor)

    2003-01-01

    Records are presented from the 5th Conference on Aerospace Materials, Processes, and Environmental Technology. Topics included pollution prevention, inspection methods, advanced materials, aerospace materials and technical standards,materials testing and evaluation, advanced manufacturing,development in metallic processes, synthesis of nanomaterials, composite cryotank processing, environmentally friendly cleaning, and poster sessions.

  11. International Conference on Computers and Advanced Technology in Education

    CERN Document Server

    Advanced Information Technology in Education

    2012-01-01

    The volume includes a set of selected papers extended and revised from the 2011 International Conference on Computers and Advanced Technology in Education. With the development of computers and advanced technology, the human social activities are changing basically. Education, especially the education reforms in different countries, has been experiencing the great help from the computers and advanced technology. Generally speaking, education is a field which needs more information, while the computers, advanced technology and internet are a good information provider. Also, with the aid of the computer and advanced technology, persons can make the education an effective combination. Therefore, computers and advanced technology should be regarded as an important media in the modern education. Volume Advanced Information Technology in Education is to provide a forum for researchers, educators, engineers, and government officials involved in the general areas of computers and advanced technology in education to d...

  12. International Conference on Emerging Trends in Science, Engineering and Technology

    CERN Document Server

    Caroline, B; Jayanthi, J

    2012-01-01

    The present book is based on the research papers presented in the International Conference on Emerging Trends in Science, Engineering and Technology 2012, held at Tiruchirapalli, India. The papers presented bridges the gap between science, engineering and technology. This book covers a variety of topics, including mechanical, production, aeronautical, material science, energy, civil and environmental energy, scientific management, etc. The prime objective of the book is to fully integrate the scientific contributions from academicians, industrialists and research scholars.

  13. 3rd International Conference on Computer & Communication Technologies

    CERN Document Server

    Bhateja, Vikrant; Raju, K; Janakiramaiah, B

    2017-01-01

    The book is a compilation of high-quality scientific papers presented at the 3rd International Conference on Computer & Communication Technologies (IC3T 2016). The individual papers address cutting-edge technologies and applications of soft computing, artificial intelligence and communication. In addition, a variety of further topics are discussed, which include data mining, machine intelligence, fuzzy computing, sensor networks, signal and image processing, human-computer interaction, web intelligence, etc. As such, it offers readers a valuable and unique resource.

  14. International Conference on Systems, Control and Information Technologies 2016

    CERN Document Server

    Kaliczyńska, Małgorzata

    2017-01-01

    This book presents the proceedings of the International Conference on Systems, Control and Information Technologies 2016. It includes research findings from leading experts in the fields connected with INDUSTRY 4.0 and its implementation, especially: intelligent systems, advanced control, information technologies, industrial automation, robotics, intelligent sensors, metrology and new materials. Each chapter offers an analysis of a specific technical problem followed by a numerical analysis and simulation as well as the implementation for the solution of a real-world problem.

  15. The Petroleum Technology Conference. Success stories - and the road ahead

    Energy Technology Data Exchange (ETDEWEB)

    2007-07-01

    The conference comprises 16 presentations with sections on the petroleum research in Norway, achievements and potentials resulting from the Petromax and Demo 2000 programs, what makes technology attractive to the investors and the strategies of large investment companies, subsea developments and the implementation of advanced technology in view of the challenges of a maturing Norwegian shelf. 8 of the 16 papers have been indexed for the database (tk)

  16. International Conference on Intelligent Technologies and Engineering System (ICITES 2012)

    CERN Document Server

    Huang, Yi-Cheng; Intelligent Technologies and Engineering Systems

    2013-01-01

    This book concentrates on intelligent technologies as it relates to engineering systems. The book covers the following topics: networking, signal processing, artificial intelligence, control and software engineering, intelligent electronic circuits and systems, communications, and materials and mechanical engineering. The book is a collection of original papers that have been reviewed by technical editors. These papers were presented at the International Conference on Intelligent Technologies and Engineering Systems, held Dec. 13-15, 2012.

  17. 2nd International Conference on Intelligent Technologies and Engineering Systems

    CERN Document Server

    Chen, Cheng-Yi; Yang, Cheng-Fu

    2014-01-01

    This book includes the original, peer reviewed research papers from the 2nd International Conference on Intelligent Technologies and Engineering Systems (ICITES2013), which took place on December 12-14, 2013 at Cheng Shiu University in Kaohsiung, Taiwan. Topics covered include: laser technology, wireless and mobile networking, lean and agile manufacturing, speech processing, microwave dielectrics, intelligent circuits and systems, 3D graphics, communications, and structure dynamics and control.

  18. JPRS Report, Science & Technology, Europe, First International Computers Communications Conference

    Science.gov (United States)

    2007-11-02

    Hong Kong Telephone has employed fibre optic technology in its transmission network since 1981. Fibre optic transmission systems are used to...leased datalines. The potentials of fibre optic systems are large, and in this paper, some examples will be given to illustrate how the attributes of... fibre optic systems are exploited in Hong Kong Telephone. This report of Science & Technology Europe, First International Computers Communications Conference.

  19. 7th International Conference on Sensing Technology

    CERN Document Server

    Mukhopadhyay, Subhas; Jayasundera, Krishanthi

    2015-01-01

    This book is written for academic and industry professionals working in the field of sensing, instrumentation and related fields, and is positioned to give a snapshot of the current state of the art in sensing technology, particularly from the applied perspective. The book is intended to give broad overview of the latest developments, in addition to discussing the process through which researchers go through in order to develop sensors, or related systems, which will become more widespread in the future.

  20. Second annual clean coal technology conference: Proceedings. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-09

    The Second Annual Clean Coal Technology Conference was held at Atlanta, Georgia, September 7--9, 1993. The Conference, cosponsored by the US Department of Energy (USDOE) and the Southern States Energy Board (SSEB), seeks to examine the status and role of the Clean Coal Technology Demonstration Program (CCTDP) and its projects. The Program is reviewed within the larger context of environmental needs, sustained economic growth, world markets, user performance requirements and supplier commercialization activities. This will be accomplished through in-depth review and discussion of factors affecting domestic and international markets for clean coal technology, the environmental considerations in commercial deployment, the current status of projects, and the timing and effectiveness of transfer of data from these projects to potential users, suppliers, financing entities, regulators, the interested environmental community and the public. Individual papers have been entered separately.

  1. 5th International Conference on Sustainable Automotive Technologies

    CERN Document Server

    Subic, Aleksandar; Trufin, Ramona

    2014-01-01

    This book captures selected peer reviewed papers presented at the 5th International Conference on Sustainable Automotive Technologies, ICSAT 2013, held in Ingolstadt, Germany. ICSAT is the state-of-the-art conference in the field of new technologies for transportation. The book brings together the work of international researchers and practitioners under the following interrelated headings: fuel transportation and storage, material recycling, manufacturing and management costs, engines and emission reduction. The book provides a very good overview of research and development activities focused on new technologies and approaches capable of meeting the challenges to sustainable mobility. About the Editors: Prof. Dr. Jörg Wellnitz is the Dean of the Faculty of Mechanical Engineering, Technische Hochschule Ingolstadt, Germany. Prof. Dr. Aleksandar Subic is the Head of the School of Aerospace, Mechanical and Manufacturing Engineering, RMIT University, Australia. Ramona Trufin, M.A. is the coordinator of the Facul...

  2. International Conference on Information and Communication Technology for Sustainable Development

    CERN Document Server

    Joshi, Amit; Modi, Nilesh; Pathak, Nisarg

    2016-01-01

    The two volumes of this book collect high-quality peer-reviewed research papers presented in the International Conference on ICT for Sustainable Development (ICT4SD 2015) held at Ahmedabad, India during 3 – 4 July 2015. The book discusses all areas of Information and Communication Technologies and its applications in field for engineering and management. The main focus of the volumes are on applications of ICT for Infrastructure, e-Governance, and contemporary technologies advancements on Data Mining, Security, Computer Graphics, etc. The objective of this International Conference is to provide an opportunity for the researchers, academicians, industry persons and students to interact and exchange ideas, experience and expertise in the current trend and strategies for Information and Communication Technologies.

  3. Proceedings of the 1996 oil heat technology conference and workshop

    Energy Technology Data Exchange (ETDEWEB)

    McDonald, R.J.

    1996-07-01

    This Conference is a key technology transfer activity supported by the ongoing Combustion Equipment Technology (Oil-Heat R and D) program at BNL, and is aimed at providing a forum for the exchange of information among international researchers, engineers, manufacturers, and marketers of oil-fired space-conditioning equipment. The objectives of the Conference were to: identify and evaluate the state-of-the-art and recommend new initiatives for higher efficiency, a cleaner environment, and to satisfy consumer needs cost-effectively, reliably, and safely; and foster cooperation among federal and industrial representatives with the common goal of sustained national economic growth and energy security via energy conservation. The 1996 Oil Technology Conference comprised: (a) fourteen technical papers, and (b) four workshops which focused on mainstream issues in oil-heating technology, namely: oilheat research agenda forum; fan atomized burner commercialization, applications, and product development; fuel quality, storage and maintenance--industry discussion; and application of oil heat venting tables, NFPA 31 standard. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

  4. 2007 Pacific Operational Science and Technology Conference

    Science.gov (United States)

    2007-04-04

    Infantry, 25th ID SFC Mario Miramontiz, USA, 1-21 Infantry, 25th ID SGM George Garcia , USA, 1-21 Infantry, 25th ID SMSgt John Anipe, USAF, 25th...Hooks S&T-Transition@dhs.gov Starnes Walker S&T-Research@dhs.gov Roger McGinnis S&T-Innovation@dhs.gov Lil Ramirez S&T-InternationalPrograms@dhs.gov 38...Our S&T Partners Israel USA Sweden France Norway UK Germany Australia India Singapore Singapore Australia UK USFrance Defence Technology Office

  5. 1st International Conference on Data Engineering and Communication Technology

    CERN Document Server

    Bhateja, Vikrant; Joshi, Amit

    2017-01-01

    This two-volume book contains research work presented at the First International Conference on Data Engineering and Communication Technology (ICDECT) held during March 10–11, 2016 at Lavasa, Pune, Maharashtra, India. The book discusses recent research technologies and applications in the field of Computer Science, Electrical and Electronics Engineering. The aim of the Proceedings is to provide cutting-edge developments taking place in the field data engineering and communication technologies which will assist the researchers and practitioners from both academia as well as industry to advance their field of study.

  6. 9th International Conference on Advanced Computing & Communication Technologies

    CERN Document Server

    Mandal, Jyotsna; Auluck, Nitin; Nagarajaram, H

    2016-01-01

    This book highlights a collection of high-quality peer-reviewed research papers presented at the Ninth International Conference on Advanced Computing & Communication Technologies (ICACCT-2015) held at Asia Pacific Institute of Information Technology, Panipat, India during 27–29 November 2015. The book discusses a wide variety of industrial, engineering and scientific applications of the emerging techniques. Researchers from academia and industry present their original work and exchange ideas, information, techniques and applications in the field of Advanced Computing and Communication Technology.

  7. Technology design of composite parts

    OpenAIRE

    K. Karjust; R. Küttner; M. Pohlak

    2007-01-01

    Purpose: Purpose of this paper is to optimize the design of the manufacturing technology process of large composite plastic products. One of the key problems is how to integrate computer-based product design and planning of the technology process.Design/methodology/approach: In the current study the Neural Network meta-modelling technique has been used. The optimization of the plastic sheet and its strengthening layer thickness has been performed using the surrogate design model. For modeling...

  8. Proceedings of the 1999 Review Conference on Fuel Cell Technology

    Energy Technology Data Exchange (ETDEWEB)

    None Available

    2000-06-05

    The 1999 Review Conference on Fuel Cell Technology was jointly sponsored by the U.S. Department of Energy, Federal Energy Technology Center (FETC), the Gas Research Institute (GRI), and the Electric Power Research Institute (EPRI). It was held August 3 to 5 in Chicago, Illinois. The goal of this conference was to provide a forum for reviewing fuel cell research and development (R&D) programs, assist in strategic R&D planning, promote awareness of sponsor activities, and enhance interactions between manufacturers, researchers, and stakeholders. This conference was attended by over 250 representatives from industry, academia, national laboratories, gas and electric utilities, DOE, and other Government agencies. The conference agenda included a keynote session, five presentation sessions, a poster presentation reception, and three breakout sessions. The presentation session topics were DOD Fuel Cell Applications, Low-Temperature Fuel Cell Manufacturers, Low-Temperature Component Research, High-Temperature Fuel Cell Manufacturers, and High-Temperature Component Research; the breakout session topics were Future R&D Directions for Low-Temperature Fuel Cells, Future R&D Directions for High-Temperature Fuel Cells, and a plenary summary session. All sessions were well attended.

  9. Technology design of composite parts

    Directory of Open Access Journals (Sweden)

    K. Karjust

    2007-06-01

    Full Text Available Purpose: Purpose of this paper is to optimize the design of the manufacturing technology process of large composite plastic products. One of the key problems is how to integrate computer-based product design and planning of the technology process.Design/methodology/approach: In the current study the Neural Network meta-modelling technique has been used. The optimization of the plastic sheet and its strengthening layer thickness has been performed using the surrogate design model. For modeling and structural analysis of derivative products CAE (ANSYS and CAD (Unigraphics systems are used. The Finite Element Analysis simulation was performed with optimal thickness values to verify the prediction accuracy of a surrogate model.Findings: The optimization model is proposed to control and analyze the calculated technology planning route, the optimal vacuum forming processes, the technology of post-forming operations, strengthening and assembling operations. The design of the new products is tightly integrated with manufacturing aspects. The product family of the large composite plastic products together with the derivate products and their production technologies is designed using proposed methodology. The optimization of the plastic sheet and its strengthening layer thickness has been performed.Practical implications: The most of the methods described in this study are now under development and industrial testing. Development of manufacturing (operation plans for a product family is of great practical importance with many significant cost implications. In design of derivative products for the product family, the nonlinear optimization is used and the detailed description of the product is established. The proposed approach is exemplified by the development of a family of products in Wellspa Inc.Originality/value: Value of this paper is that developed optimization model controls and analyzes the calculated technology planning route.

  10. 5th International Conference on Advanced Manufacturing Engineering and Technologies

    CERN Document Server

    Jakovljevic, Zivana; NEWTECH2017

    2017-01-01

    This book presents the proceedings from the 5th NEWTECH conference (Belgrade, Serbia, 5–9 June 2017), the latest in a series of high-level conferences that bring together experts from academia and industry in order to exchange knowledge, ideas, experiences, research results, and information in the field of manufacturing. The range of topics addressed is wide, including, for example, machine tool research and in-machine measurements, progress in CAD/CAM technologies, rapid prototyping and reverse engineering, nanomanufacturing, advanced material processing, functional and protective surfaces, and cyber-physical and reconfigurable manufacturing systems. The book will benefit readers by providing updates on key issues and recent progress in manufacturing engineering and technologies and will aid the transfer of valuable knowledge to the next generation of academics and practitioners. It will appeal to all who work or conduct research in this rapidly evolving field.

  11. 5th Conference on Information Technologies in Biomedicine

    CERN Document Server

    Badura, Pawel; Kawa, Jacek; Wieclawek, Wojciech

    2016-01-01

    ITiB’2016 is the 5th Conference on Information Technologies in Biomedicine organized by the Department of Informatics & Medical Equipment of Silesian University of Technology every other year. The Conference is under the auspices of the Committee on Biocybernetics and Biomedical Engineering of the Polish Academy of Sciences. The meeting has become a recognized event that helps to bridge the gap between methodological achievements in engineering and clinical requirements in medical diagnosis, therapy, and rehabilitation. Mathematical information analysis, computer applications together with medical equipment and instruments have become standard tools underpinning the current rapid progress with developing Computational Intelligence. Members of academic societies of technical and medical background present their research results and clinical implementations. This proceedings (divided in 2 volumes) include the following sections: Ø Image Processing Ø Signal Processing Ø Medical Information System & ...

  12. A Distributed Architecture of Video Conference Using P2P Technology

    Directory of Open Access Journals (Sweden)

    Xiaoyan Yu

    2012-11-01

    Full Text Available Most of the traditional video conferencing are standard SIP or H.323 architecture. There will be a single point of performance bottlenecks if large-scale video conference or a larger number of conferences emerge at the same time. In this paper, we proposed a new architecture of Multipoint Video Conference which can support a lot of meetings simultaneously using P2P and application multicast technology. In the side of server, the component called Media Control Server (MCS is responsible for the media data process and transmission path selection. All the MCSs form the MCS overlay. The capacity and conference state information of User Equipments (UE are stored in the MCS overlay. MCSs which be selected process all the transcoding and transmission task of audio and video for a meeting. In the side of user, some UEs which have enough bandwidth or other conditions could also undertake parts of media data process. MCS that service to the first UE in a conference decides which audio media process task could be assigned to Conference UEs; video media process task is allocated by Service MCS of video source. There are several methods to decide the transmission path, such as delay by server, application layer multicast or Hungarian method. At last, analysis is given to demonstrate the effectiveness of our architecture.

  13. 2015 World Conference on Information Systems and Technologies

    CERN Document Server

    Correia, Ana; Costanzo, Sandor; Reis, Luis

    2015-01-01

    This book contains a selection of articles from The 2015 World Conference on Information Systems and Technologies (WorldCIST'15), held between the 1st and 3rd of April in Funchal, Madeira, Portugal, a global forum for researchers and practitioners to present and discuss recent results and innovations, current trends, professional experiences and challenges of modern Information Systems and Technologies research, technological development and applications. The main topics covered are: Information and Knowledge Management; Organizational Models and Information Systems; Intelligent and Decision Support Systems; Big Data Analytics and Applications; Software Systems, Architectures, Applications and Tools; Multimedia Systems and Applications; Computer Networks, Mobility and Pervasive Systems; Human-Computer Interaction; Health Informatics; Information Technologies in Education; Information Technologies in Radiocommunications.

  14. 2nd International Conference on Mobile and Wireless Technology

    CERN Document Server

    Wattanapongsakorn, Naruemon

    2015-01-01

    This book provides a snapshot of the current state-of-the-art in the fields of mobile and wireless technology, security and applications.  The proceedings of the 2nd International Conference on Mobile and Wireless Technology (ICMWT2015), it represents the outcome of a unique platform for researchers and practitioners from academia and industry to share cutting-edge developments in the field of mobile and wireless science technology, including those working on data management and mobile security.   The contributions presented here describe the latest academic and industrial research from the international mobile and wireless community.  The scope covers four major topical areas: mobile and wireless networks and applications; security in mobile and wireless technology; mobile data management and applications; and mobile software.  The book will be a valuable reference for current researchers in academia and industry, and a useful resource for graduate-level students working on mobile and wireless technology...

  15. 4th International Conference on Sustainable Automotive Technologies

    CERN Document Server

    Wellnitz, Jörg; Leary, Martin; Koopmans, Lucien

    2012-01-01

    The book on Sustainable Automotive Technologies aims to draw special attention to the research and practice focused on new technologies and approaches capable of meeting the challenges to sustainable mobility. In particular, the book features incremental and radical technical advancements that are able to meet social, economic and environmental targets in both local and global contexts. These include original solutions to the problems of pollution and congestion, vehicle and public safety, sustainable vehicle design and manufacture, new structures and materials, new power-train technologies and vehicle concepts. In addition to vehicle technologies, the book is also concerned with the broader systemic issues such as sustainable supply chain systems, integrated logistics and telematics, and end-of-life vehicle management. It captures selected peer reviewed papers accepted for presentation at the 4th International Conference on Sustainable Automotive Technologies, ICSAT2012, held at the RMIT, Melbourne, Australi...

  16. 10th International Conference on Computing and Information Technology

    CERN Document Server

    Unger, Herwig; Meesad, Phayung

    2014-01-01

    Computer and Information Technology (CIT) are now involved in governmental, industrial, and business domains more than ever. Thus, it is important for CIT personnel to continue academic research to improve technology and its adoption to modern applications. The up-to-date research and technologies must be distributed to researchers and CIT community continuously to aid future development. The 10th International Conference on Computing and Information Technology (IC 2 IT2014) organized by King Mongkut's University of Technology North Bangkok (KMUTNB) and partners provides an exchange of the state of the art and future developments in the two key areas of this process: Computer Networking and Data Mining. Behind the background of the foundation of ASEAN, it becomes clear that efficient languages, business principles and communication methods need to be adapted, unified and especially optimized to gain a maximum benefit to the users and customers of future IT systems.

  17. 2016 World Conference on Information Systems and Technologies

    CERN Document Server

    Correia, Ana; Adeli, Hojjat; Reis, Luis; Teixeira, Marcelo

    2016-01-01

    This book contains a selection of articles from The 2016 World Conference on Information Systems and Technologies (WorldCIST'16), held between the 22nd and 24th of March at Recife, Pernambuco, Brazil. WorldCIST is a global forum for researchers and practitioners to present and discuss recent results and innovations, current trends, professional experiences and challenges of modern Information Systems and Technologies research, together with their technological development and applications. The main topics covered are: Information and Knowledge Management; Organizational Models and Information Systems; Software and Systems Modeling; Software Systems, Architectures, Applications and Tools; Multimedia Systems and Applications; Computer Networks, Mobility and Pervasive Systems; Intelligent and Decision Support Systems; Big Data Analytics and Applications; Human-Computer Interaction; Health Informatics; Information Technologies in Education; Information Technologies in Radiocommunications.

  18. 4th International Conference on Robot Intelligence Technology and Applications

    CERN Document Server

    Karray, Fakhri; Jo, Jun; Sincak, Peter; Myung, Hyun

    2017-01-01

    This book covers all aspects of robot intelligence from perception at sensor level and reasoning at cognitive level to behavior planning at execution level for each low level segment of the machine. It also presents the technologies for cognitive reasoning, social interaction with humans, behavior generation, ability to cooperate with other robots, ambience awareness, and an artificial genome that can be passed on to other robots. These technologies are to materialize cognitive intelligence, social intelligence, behavioral intelligence, collective intelligence, ambient intelligence and genetic intelligence. The book aims at serving researchers and practitioners with a timely dissemination of the recent progress on robot intelligence technology and its applications, based on a collection of papers presented at the 4th International Conference on Robot Intelligence Technology and Applications (RiTA), held in Bucheon, Korea, December 14 - 16, 2015. For better readability, this edition has the total of 49 article...

  19. International Conference on Informatics and Communication Technologies for Societal Developmen

    CERN Document Server

    Bhojan, Anand; Peter, J

    2015-01-01

    This volume comprises research papers presented at the International Conference on Informatics and Communication Technologies for Societal Development (ICICTS 2014) held at Karunya University, India. The content focuses on the recent advancements in image or signal processing, computer vision, communication technologies, soft computing, advanced computing, data mining, and knowledge discovery. The primary objective of this volume is to facilitate advancement and application of the knowledge and to promote ideas that solve problems faced by society through cutting-edge technologies. The chapters contain selected articles from academicians, researchers, and industry experts in the form of frameworks, models, and architectures. Practical approaches, observations, and results of research that promotes societal development are also incorporated. This volume will serve as a useful compendium for interested readers and researchers working towards societal development from the technological perspective.

  20. 2017 World Conference on Information Systems and Technologies

    CERN Document Server

    Correia, Ana; Adeli, Hojjat; Reis, Luís; Costanzo, Sandra

    2017-01-01

    This book presents a selection of papers from the 2017 World Conference on Information Systems and Technologies (WorldCIST'17), held between the 11st and 13th of April 2017 at Porto Santo Island, Madeira, Portugal. WorldCIST is a global forum for researchers and practitioners to present and discuss recent results and innovations, current trends, professional experiences and challenges involved in modern Information Systems and Technologies research, together with technological developments and applications. The main topics covered are: Information and Knowledge Management; Organizational Models and Information Systems; Software and Systems Modeling; Software Systems, Architectures, Applications and Tools; Multimedia Systems and Applications; Computer Networks, Mobility and Pervasive Systems; Intelligent and Decision Support Systems; Big Data Analytics and Applications; Human–Computer Interaction; Ethics, Computers & Security; Health Informatics; Information Technologies in Education; and Information Tec...

  1. 3rd International Conference on Robot Intelligence Technology and Applications

    CERN Document Server

    Yang, Weimin; Jo, Jun; Sincak, Peter; Myung, Hyun

    2015-01-01

    This book covers all aspects of robot intelligence from perception at sensor level and reasoning at cognitive level to behavior planning at execution level for each low level segment of the machine. It also presents the technologies for cognitive reasoning, social interaction with humans, behavior generation, ability to cooperate with other robots, ambience awareness, and an artificial genome that can be passed on to other robots. These technologies are to materialize cognitive intelligence, social intelligence, behavioral intelligence, collective intelligence, ambient intelligence and genetic intelligence. The book aims at serving researchers and practitioners with a timely dissemination of the recent progress on robot intelligence technology and its applications, based on a collection of papers presented at the 3rd International Conference on Robot Intelligence Technology and Applications (RiTA), held in Beijing, China, November 6 - 8, 2014. For better readability, this edition has the total 74 papers group...

  2. Proceedings of the 1994 CACTS conference on air cushion technology

    Energy Technology Data Exchange (ETDEWEB)

    Laframboise, J.E. [ed.

    1995-03-01

    The conference held by the Canadian Air Cushion Technology Society (CACTS) was attended by 56 specialists in the field from around the world. CACTS is devoted to the development and application of air cushion technology, primarily in the transportation domain, but also in industry and other fields where the technology may be of benefit. Some uses for the technology include rescue operations in natural disasters such as flooding and oil spill clean up operations in coastal waters. A total of 20 papers were presented at this meeting. Subjects included air cushion spray booms, amphibious transporters in oil spill events, unconventional propulsion systems for air cushion vehicles, ride control systems, and high-speed hovercraft design. Refs., tabs., figs.

  3. 78 FR 53789 - Technology Innovations for Substance Abuse and Mental Health Treatment Conference & Related...

    Science.gov (United States)

    2013-08-30

    ... CONTROL POLICY Technology Innovations for Substance Abuse and Mental Health Treatment Conference & Related... Technology Innovations for Substance Abuse and Mental Health Treatment Conference highlighting promising... prevention, treatment, and recovery for these disorders. The conference will be held on September 16, 2013...

  4. NATO Conference on Work, Organizations, and Technological Change

    CERN Document Server

    Niehaus, Richard

    1982-01-01

    This volume is the proceedings of the Symposium entitled, "Work, Organizations and Technological Change" which was held in Garmisch-Partenkirchen, West Germany, 14-19 June 1981. The meeting was sponsored by the Special Panel on Systems Sciences of the NATO Scientific Affairs Division. In proposing this meeting the Symposium Directors built upon several preceding NATO conferences in the general area of personnel systems, manpower modelling, and organization. The most recent NATO Conference, entitled "Manpower Planning and Organization Design," was held in Stresa, Italy in 1977. That meeting was organized to foster research on the interrelationships between programmatic approaches to personnel planning within organizations and behavioral science approachs to organization design. From that context of corporate planning the total internal organizational perspective was the MACRO view, and the selection, assignment, care and feeding of the people was the MICRO view. Conceptually, this meant that an integrated appr...

  5. The Third International Conference On Space Information Technology Held In Beijing

    Institute of Scientific and Technical Information of China (English)

    Bian Ji

    2009-01-01

    The Third International Conference on Space Information Technology (ICSIT) was held on November 27 in Beijing. The conference was hosted by China Academy of Space Technology (CAST) and organized by Space Star Technology Co., Ltd., co-organized by the Second Academy of Aerospace China and Huazhong University of Science and Technology.

  6. CONFERENCE REVIEW:V. International Educational Technology Symposium

    Directory of Open Access Journals (Sweden)

    Reviewed by Mubin KIYICI

    2005-10-01

    Full Text Available 167V. International Educational Technology SymposiumWas held in Sakarya UniversityBetween 21 – 23 September 2005Reviewed by Mubin KIYICISakarya Universitymkiyici@anadolu.edu.trV. International Educational Technology Symposium was held in Sakarya University heldbetween 21 – 23 September 2005 by cooperation with Eastern Mediterranean University,Louisiana State University, Governors State University and Ohio University, and TOJET(The Turkish Online Journal of Educational Technology journal, at Sakarya UniversityCampus. Assoc. Prof. Dr. Aytekin ISMAN who was conference coordinator and Editor inchief of TOJET spoke at the opening ceremony of symposium. His speech was related todiffusion of distance education and diffusion of usage educational technology. And thenProf. Dr. Mehmet DURMAN who is Rector of Sakarya University, talked about aapplications of Distance Education which is applied by Sakarya University and educationaltechnology applications in Tukey. His Speech is here:168Dear GuestsWelcome to the “5th International Educational Technology ConferenceIETC/EGİTEK 2005. It is an international educational activity for academics,teachers and educators. This conference is now a well known educationaltechnology event and the number of paper submissions and attendeesincrease every year.This year, IETC-2005 received 268 applications. The conference academicadvisory board accepted 209 applications.IETC-2005 promotes the development and dissemination of theoreticalknowledge, conceptual research, and professional knowledge throughconference activities, the conference proceeding book, and the TurkishOnline Journal of Educational Technology (TOJET. Its focus is to create anddisseminate knowledge about the use instructional technology for learningand teaching in education.The main theme of IETC-2005 is distance education. Distance education is adelivery system of teaching and learning, when the teacher and the studentare separated by physical distance

  7. 1st International Conference on Robot Intelligence Technology and Applications

    CERN Document Server

    Matson, Eric; Myung, Hyun; Xu, Peter

    2013-01-01

    In recent years, robots have been built based on cognitive architecture which has been developed to model human cognitive ability. The cognitive architecture can be a basis for intelligence technology to generate robot intelligence. In this edited book the robot intelligence is classified into six categories: cognitive intelligence, social intelligence, behavioral intelligence, ambient intelligence, collective intelligence and genetic intelligence. This classification categorizes the intelligence of robots based on the different aspects of awareness and the ability to act deliberately as a result of such awareness. This book aims at serving researchers and practitioners with a timely dissemination of the recent progress on robot intelligence technology and its applications, based on a collection of papers presented at the 1st International Conference on Robot Intelligence Technology and Applications (RiTA), held in Gwangju, Korea, December 16-18, 2012. For a better readability, this edition has the total 101 ...

  8. Conference Proceedings: World Wise 99 -- Conference on sustainable infrastructure: emerging technologies for the new millennium

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    Energy conservation and sustainable development through emerging technologies was the focus of this third biennial conference of the Manitoba Heavy Construction Association. Papers presented discussed a wide range of topics including a few pertaining to developments in the livestock industry in Manitoba, a substantial number of papers involving road and bridge construction and management, paving and concrete building products, aqueduct and trenchless sewer rehabilitation, and cathodic protection of water mains. The majority of the speakers discussed topics related to sustainable development and environmental protection such as stormceptor hydrology, chemical contamination in site remediation projects, optimization of wastewater stabilization ponds, recycling organic residuals and land rehabilitation, harnessing the energy of ocean waves, alternative energy sources, and the beneficial re-use of glass, rubber and geotextiles in road construction. Commercializing new technology was the subject of an extended panel discussion.

  9. 2nd International Conference on Recent Advances in Information Technology

    CERN Document Server

    Mukhopadhyay, Sushanta

    2014-01-01

    The book is based on the research papers presented in Second International Conference on Recent Advances in Information Technology (RAIT 2014), held at Indian School of Mines, Dhanbad, India. It provides the latest developments in the area of information technology and covers a variety of topics, including Advanced Algorithm Design and Analysis, Algorithmic Graph Theory, Artificial Intelligence, Bioinformatics, Circuit Design Automation, Computational Biology, Computational Mathematics, Cryptology, Data Compression, Database Management System, Data Mining, E-Applications, Embedded System, Information and Network Security, Information Retrieval, Internet Computing, etc. The objective is to familiarize the reader with the latest scientific developments that are taking place in various fields and the latest sophisticated problem solving tools that are being developed to deal with the complex and intricate problems that are otherwise difficult to solve by the usual and traditional methods.

  10. International Conference on NextGen Electronic Technologies

    CERN Document Server

    Thalmann, Nadia; Bhaaskaran, V

    2017-01-01

    This book is a collection of keynote lectures from international experts presented at International Conference on NextGen Electronic Technologies (ICNETS2-2016). ICNETS2 encompasses six symposia covering all aspects of electronics and communications domains, including relevant nano/micro materials and devices . This volume comprises of recent research in areas like computational signal processing analysis, intelligent embedded systems, nanoelectronic materials and devices, optical and microwave technologies, VLSI design: circuits systems and application, and wireless communication networks, and the internet of things. The contents of this book will be useful to researchers, professionals, and students working in the core areas of electronics and their applications, especially to signal processing, embedded systems, and networking.

  11. Robots and manipulator systems. Part 2. [Conference papers

    Science.gov (United States)

    Heer, E.

    1977-01-01

    This book represents a conference on robots and manipulator systems. Topics discussed include: mathematical modeling systems integrators, the use of TV monitors for remote operation of machinery on earth and in space, an evaluation of various control modes, remotely piloted aircraft, undersea operations, and prosthetic devices for the physically handicapped.

  12. Proceedings of the 1998 oil heat technology conference

    Energy Technology Data Exchange (ETDEWEB)

    McDonald, R.J.

    1998-04-01

    The 1998 Oil Heat Technology Conference was held on April 7--8 at Brookhaven National Laboratory (BNL) under sponsorship by the US Department of Energy, Office of Building Technologies, State and Community Programs (DOE/BTS). The meeting was held in cooperation with the Petroleum Marketers Association of America (PMAA). Fourteen technical presentations was made during the two-day program, all related to oil-heat technology and equipment, these will cover a range of research, developmental, and demonstration activities being conducted within the United States and Canada, including: integrated oil heat appliance system development in Canada; a miniature heat-actuated air conditioner for distributed space conditioning; high-flow fan atomized oil burner (HFAB) development; progress in the development of self tuning oil burners; application of HFAB technology to the development of a 500 watt; thermophotovoltaic (TPV) power system; field tests of the Heat Wise Pioneer oil burner and Insight Technologies AFQI; expanded use of residential oil burners to reduce ambient ozone and particulate levels by conversion of electric heated homes to oilheat; PMAA`s Oil Heat Technician`s Manual (third edition); direct venting concept development; evolution of the chimney; combating fuel related problems; the effects of red dye and metal contamination on fuel oil stability; new standard for above ground and basement residential fuel oil storage; plastic and steel composite secondary contained tanks; and money left on the table: an economic analysis of tank cleaning.

  13. First International Conference on Applications of Photonic Technology (ICAPT'94)

    CERN Document Server

    Chrostowski, Jacek; Measures, Raymond; Applications of Photonic Technology

    1995-01-01

    In this book we present a snapshot of the state of the art in photonics in 1994, showing typical applications and emerging new ones; discussing the key technologies behind these applications, their limitations, and prospects. The articles in this book are extended versions of the papers presented at the first International Conference on Applications ofPhotonic Technology (ICAPT'94), held in Toronto, Canada, on June 21-23, 1994. Photonics has been recognized as one of the key technologies for the 21 st century, as electronics was the technology of the 20th centrury and electrical engineering changed the life of people in the 19th century. According to the recent report of the Organization for Economic Cooperation and Development in Paris (OECD), the market for photonics will grow dramatically in the next 10 years with an expected world-wide expenditure of US $230 billion from some US $30 billion in 1992. The explosion of information technology was the largest driving force for the deployment of photonic techno...

  14. Proceedings of the Conference on Graduate Student Research in Engineering and Technology Education (Minneapolis, Minnesota, May 22, 2008)

    Science.gov (United States)

    National Center for Engineering and Technology Education, 2008

    2008-01-01

    As part of the usual end of year meeting that has been a feature of the National Center for Engineering and Technology Education (NCETE) project, a conference intending to provide a forum for young voices in an outside of the Center was organized. The basic model for the gathering was borrowed from track and field. This was to be an intellectual…

  15. Advances in Technology and Management : Proceedings of the 2012 International Conference on Technology and Management

    CERN Document Server

    2012-01-01

    This book Advances in Technology and Management contains 116 full length papers presented at the International Conference on Technology and Management, held on June 12-13, 2012, Jeju-Island, Korea. The goal of ICTAM 2012 is to bring together researchers working in many different areas of technology and management to foster international collaborations and exchange of new ideas.   This volume can be divided into two sections on the basis of the classification of manuscripts considered. The first section deals with technology. The second section of this volume consists of management.

  16. Conference Report: International Conference on Health Sciences and Medical Technologies, Tlemcen, Algeria 27-29 September 2016 ICHSMT'16.

    Science.gov (United States)

    Khelassi, Abdeldjalil

    2016-10-01

    The International Conference on Health Sciences and Medical Technologies (ICHSMT'16) was held in Tlemcen, Algeria from 27-29 September 2016. The conference was organized by the University Of Tlemcen, in partnership with Electronic Physician Journal, Mehr Publishing, and Mehrafarin Scientific Publishing. There were participants from 14 nations who presented their research in poster or oral presentations. There were also some keynote speakers who gave talks on topics such as community health, ethics of publishing medical research, and scientific writing.

  17. 2nd International Conference on Computer and Communication Technologies

    CERN Document Server

    Raju, K; Mandal, Jyotsna; Bhateja, Vikrant

    2016-01-01

    The book is about all aspects of computing, communication, general sciences and educational research covered at the Second International Conference on Computer & Communication Technologies held during 24-26 July 2015 at Hyderabad. It hosted by CMR Technical Campus in association with Division – V (Education & Research) CSI, India. After a rigorous review only quality papers are selected and included in this book. The entire book is divided into three volumes. Three volumes cover a variety of topics which include medical imaging, networks, data mining, intelligent computing, software design, image processing, mobile computing, digital signals and speech processing, video surveillance and processing, web mining, wireless sensor networks, circuit analysis, fuzzy systems, antenna and communication systems, biomedical signal processing and applications, cloud computing, embedded systems applications and cyber security and digital forensic. The readers of these volumes will be highly benefited from the te...

  18. International Conference on Soft Computing in Information Communication Technology

    CERN Document Server

    Soft Computing in Information Communication Technology

    2012-01-01

      This is a collection of the accepted papers concerning soft computing in information communication technology. All accepted papers are subjected to strict peer-reviewing by 2 expert referees. The resultant dissemination of the latest research results, and the exchanges of views concerning the future research directions to be taken in this field makes the work of immense value to all those having an interest in the topics covered. The present book represents a cooperative effort to seek out the best strategies for effecting improvements in the quality and the reliability of Neural Networks, Swarm Intelligence, Evolutionary Computing, Image Processing Internet Security, Data Security, Data Mining, Network Security and Protection of data and Cyber laws. Our sincere appreciation and thanks go to these authors for their contributions to this conference. I hope you can gain lots of useful information from the book.

  19. 1987 Oak Ridge model conference: Proceedings: Volume I, Part 3, Waste Management

    Energy Technology Data Exchange (ETDEWEB)

    1987-01-01

    A conference sponsored by the United States Department of Energy (DOE), was held on waste management. Topics of discussion were transuranic waste management, chemical and physical treatment technologies, waste minimization, land disposal technology and characterization and analysis. Individual projects are processed separately for the data bases. (CBS)

  20. 1987 Oak Ridge model conference: Proceedings: Volume I, Part 2, Waste Management

    Energy Technology Data Exchange (ETDEWEB)

    1987-01-01

    A conference sponsored by the United States Department of Energy (DOE) was held on Waste Mangement. Topics discussed were waste stabilization technologies regulations and standards, innovative treatment technology, waste stabilization projects. Individual projects are processed separately for the data bases. (CBS)

  1. Galileo Press Conference from JPL. Parts 1 and 2

    Science.gov (United States)

    1992-01-01

    This two-tape Jet Propulsion Laboratory (JPL) video production presents a Dec. 8, 1992 press conference held at JPL to discuss the final Galileo spacecraft encounter with Earth before beginning its journey to Jupiter. The main theme of the conference was centered on the significance of the 2nd and final Earth/Moon flyby as being the spacecraft's last planetary encounter in the solar system before reaching Jupiter, as well as final flight preparations prior to its final journey. Each person of the five member panel was introduced by Robert MacMillan (JPL Public Information Mgr.) before giving brief presentations including slides and viewgraphs covering their area of expertise regarding Galileo's current status and future plans. After the presentations, the media was given an opportunity to ask questions of the panel regarding the mission. Mr. Wesley Huntress (Dir. of Solar System Exploration (NASA)), William J. ONeill (Galileo Project Manager), Neal E. Ausman, Jr. (Galileo Mission Director), Dr. Torrence V. Johnson (Galileo Project Scientist) and Dr. Ronald Greeley (Member, Imaging Team, Colorado St. Univ.) made up the panel and discussed topics including: Galileo's interplanetary trajectory; project status and performance review; instrument calibration activities; mission timelines; lunar observation and imaging; and general lunar science. Also included in the last three minutes of the video are simulations and images of the 2nd Galileo/Moon encounter.

  2. Proceedings of the Families, Technology, & Education Conference (Chicago, IL, October 30-November 1, 1997).

    Science.gov (United States)

    Robertson, Anne S., Ed.

    The Families, Technology, and Education Conference was held in late 1997, when computer technology and the Internet were raising concerns as well as presenting new opportunities for parents. The conference papers in this collection are organized into six sections. Papers in the General Sessions section are: (1) "Reading the President's Technology…

  3. Conference Report: The Nour Foundation Georgetown University & Blackfriars Hall, Oxford University Symposium Series Technology, Neuroscience & the Nature of Being: Considerations of Meaning, Morality and Transcendence Part I: The Paradox of Neurotechnology 8 May 2009

    Directory of Open Access Journals (Sweden)

    Palchik Guillermo

    2009-07-01

    Full Text Available Abstract This reviews the first of a tripartite symposia series dealing with novel neuroscientific technologies, the nature of consciousness and being, and the questions that arise from such interactions. The event took place on May 8 2009, at Georgetown University, and brought together ten leading figures on fields ranging from Neuroscience and Robotics to Philosophy, that commented on their research and provided ethical, moral and practical insight and perspectives into how these technologies can shape the future of neuroscientific and human development, as well as denoting the potential abuses and the best way to proceed about them.

  4. Conference Report: The Nour Foundation Georgetown University & Blackfriars Hall, Oxford University Symposium Series Technology, Neuroscience & the Nature of Being: Considerations of Meaning, Morality and Transcendence Part I: The Paradox of Neurotechnology 8 May 2009

    Science.gov (United States)

    Palchik, Guillermo

    2009-01-01

    This reviews the first of a tripartite symposia series dealing with novel neuroscientific technologies, the nature of consciousness and being, and the questions that arise from such interactions. The event took place on May 8 2009, at Georgetown University, and brought together ten leading figures on fields ranging from Neuroscience and Robotics to Philosophy, that commented on their research and provided ethical, moral and practical insight and perspectives into how these technologies can shape the future of neuroscientific and human development, as well as denoting the potential abuses and the best way to proceed about them. PMID:19615065

  5. Conference report: emerging technology for bioanalysis in the next decade.

    Science.gov (United States)

    Demuth, James E; Ji, Qin C; Booth, Brian P; Fluhler, Eric N; Greathead, Roger; Ho, Stacy; Stubbs, R John; Turk, Douglas J

    2012-11-01

    This University of Wisconsin School of Pharmacy bioanalytical conference is presented each year by the Extension Services in Pharmacy, the professional development department within the School. The purpose of this 4-day conference is to provide an educational forum to discuss issues and applications associated with the analysis of xenobiotics, metabolites, biologics and biomarkers in biological matrices. The conference is designed to include and encourage an open exchange of scientific and methodological applications for bioanalysis. To increase the interactive nature of the conference, the program was a mixture of lectures, poster sessions, round table discussions and workshops. This article summarizes the presentations at the 13th Annual Conference.

  6. Reaching consensus on drug resistance conferring mutations (Part 1

    Directory of Open Access Journals (Sweden)

    Daniela M Cirillo

    2016-01-01

    A user-friendly interface designed for nonexpert or expert operability.A standardized and validated analysis pipeline for variant analyses of M. tuberculosis next-generation sequencing (NGS data.Access to data beyond the published literature with dynamic and iterative updates of new data generated by global surveillance and clinical trials.A well-developed legal structure to ensure intellectual property rights and data ownership remain with contributors.A structured data-sharing architecture to restrict access to sensitive or unpublished data sets.Metadata standardization using CDISC: supports global, platform-independent data standards that enable information system interoperability.An emphasis on data quality and rigorous, expert curation with multiple quality control checks for whole-genome sequencing and other metadata.Validation of NGS analysis output by an expert committee with grading of resistance conferring mutations based on rigorous statistical standards.Regulatory-compliant analysis pipeline and database architecture. Successful execution of such an extensive database platform requires substantial collaboration from scientists investigating the genetic basis for drug resistance worldwide, and from developers with expertise in database design and implementation.

  7. 11th International Conference on Multimedia and Ubiquitous Engineering & 12th International Conference on Future Information Technology

    CERN Document Server

    Chen, Shu-Ching; Choo, Kim-Kwang

    2017-01-01

    This book presents the proceedings of the 11th International Conference on Multimedia and Ubiquitous Engineering (MUE2017) and the 12th International Conference on Future Information Technology (FutureTech2017), held in Seoul, South Korea on May 22–24, 2017. These two conferences provided an opportunity for academic and industrial professionals to discuss recent advances in the area of multimedia and ubiquitous environments including models and systems, new directions, and novel applications associated with the utilization and acceptance of ubiquitous computing devices and systems. The resulting papers address the latest technological innovations in the fields of digital convergence, multimedia convergence, intelligent applications, embedded systems, mobile and wireless communications, bio-inspired computing, grid and cloud computing, semantic web, user experience, HCI, and security and trust computing. The book offers a valuable resource for a broad readership, including students, academic researchers, and...

  8. Proceedings of the 2012 International Conference on Information Technology and Software Engineering : Information Technology

    CERN Document Server

    Cai, Guoqiang; Liu, Weibin; Xing, Weiwei

    2013-01-01

    Proceedings of the 2012 International Conference on Information Technology and Software Engineering presents selected articles from this major event, which was held in Beijing, December 8-10, 2012. This book presents the latest research trends, methods and experimental results in the fields of information technology and software engineering, covering various state-of-the-art research theories and approaches. The subjects range from intelligent computing to information processing, software engineering, Web, unified modeling language (UML), multimedia, communication technologies, system identification, graphics and visualizing, etc. The proceedings provide a major interdisciplinary forum for researchers and engineers to present the most innovative studies and advances, which can serve as an excellent reference work for researchers and graduate students working on information technology and software engineering. Prof. Wei Lu, Dr. Guoqiang Cai, Prof. Weibin Liu and Dr. Weiwei Xing all work at Beijing Jiaotong Uni...

  9. Proceedings of the 2012 International Conference on Information Technology and Software Engineering : Information Technology & Computing Intelligence

    CERN Document Server

    Cai, Guoqiang; Liu, Weibin; Xing, Weiwei

    2013-01-01

    Proceedings of the 2012 International Conference on Information Technology and Software Engineering presents selected articles from this major event, which was held in Beijing, December 8-10, 2012. This book presents the latest research trends, methods and experimental results in the fields of information technology and software engineering, covering various state-of-the-art research theories and approaches. The subjects range from intelligent computing to information processing, software engineering, Web, unified modeling language (UML), multimedia, communication technologies, system identification, graphics and visualizing, etc. The proceedings provide a major interdisciplinary forum for researchers and engineers to present the most innovative studies and advances, which can serve as an excellent reference work for researchers and graduate students working on information technology and software engineering. Prof. Wei Lu, Dr. Guoqiang Cai, Prof. Weibin Liu and Dr. Weiwei Xing all work at Beijing Jiaotong Uni...

  10. International Conference on Emerging Research in Electronics, Computer Science and Technology

    CERN Document Server

    Sheshadri, Holalu; Padma, M

    2014-01-01

    PES College of Engineering is organizing an International Conference on Emerging Research in Electronics, Computer Science and Technology (ICERECT-12) in Mandya and merging the event with Golden Jubilee of the Institute. The Proceedings of the Conference presents high quality, peer reviewed articles from the field of Electronics, Computer Science and Technology. The book is a compilation of research papers from the cutting-edge technologies and it is targeted towards the scientific community actively involved in research activities.

  11. 4th International Conference on Computational Collective Intel- ligence Technologies and Applications (ICCCI 2012)

    CERN Document Server

    Trawiński, Bogdan; Katarzyniak, Radosław; Jo, Geun-Sik; Advanced Methods for Computational Collective Intelligence

    2013-01-01

    The book consists of 35 extended chapters which have been selected and invited from the submissions to the 4th International Conference on Computational Collective Intelligence Technologies and Applications (ICCCI 2012) held on November 28-30, 2012 in Ho Chi Minh City, Vietnam. The book is organized into six parts, which are semantic web and ontologies, social networks and e-learning, agent and multiagent systems, data mining methods and applications, soft computing, and optimization and control, respectively. All chapters in the book discuss theoretical and practical issues connected with computational collective intelligence and related technologies. The editors hope that the book can be useful for graduate and Ph.D. students in Computer Science, in particular participants in courses on Soft Computing, Multiagent Systems, and Data Mining. This book can be also useful for researchers working on the concept of computational collective intelligence in artificial populations. It is the hope of the editors that ...

  12. PREFACE: Part II of the Proceedings of the 25th International Conference on Low Temperature Physics

    Science.gov (United States)

    Kes, Peter; Jochemsen, Reyer

    2009-03-01

    This Issue of Journal of Physics: Conference Series forms Part II of the Proceedings of the 25th International Conference on Low Temperature Physics (LT25) held in Amsterdam, The Netherlands, 6-13 August 2008. Part II contains the papers of short oral and poster presentations. In addition, it provides general information about the LT25 conference, such as a Report from the Organizers, an Activity Report to the IUPAP of the C5 Chairs, an overview of Committees, Sponsors and Exhibitors, and some Conference Statistics. Part I of the Proceedings of LT25 is a special issue of Journal of Physics: Condensed Matter. It contains the majority of the special invited lectures, such as the London Prize Lectures, the IUPAP Young Scientist Award Lectures, the Plenary and Half Plenary and Public Lectures, and the Historical Lectures presented at the conference excursion to Leiden. The JPCM LT25 special issue is available for free for a period of one year from publication (Journal of Physics: Condensed Matter). To ensure the high publication standard mandated by Journal of Physics: Condensed Matter and Journal of Physics: Conference Series, every paper was reviewed by at least one referee before it was accepted for publication. The Editors are indebted to many colleagues for invaluable assistance in the preparation and with the reviewing of the 900 papers appearing in Parts I and II of these Proceedings. In particular, we like to thank Carlo Beenakker, Jeroen van den Brink, Hans Brom, Jos de Jongh, Horst Rogalla, and Fons de Waele. Guest Editors Peter Kes and Reijer Jochemsen Leiden University, The Netherlands Conference logo

  13. The 1992 NASA Langley Measurement Technology Conference: Measurement Technology for Aerospace Applications in High-Temperature Environments

    Science.gov (United States)

    Singh, Jag J. (Editor); Antcliff, Richard R. (Editor)

    1992-01-01

    An intensive 2-day conference to discuss the current status of measurement technology in the areas of temperature/heat flux, stress/strain, pressure, and flowfield diagnostics for high temperature aerospace applications was held at Langley Research Center, Hampton, Virginia, on April 22 and 23, 1993. Complete texts of the papers presented at the Conference are included in these proceedings.

  14. A Distributed Architecture of Video Conference Using P2P Technology

    OpenAIRE

    Xiaoyan Yu; Zhenyu Yu

    2012-01-01

    Most of the traditional video conferencing are standard SIP or H.323 architecture. There will be a single point of performance bottlenecks if large-scale video conference or a larger number of conferences emerge at the same time. In this paper, we proposed a new architecture of Multipoint Video Conference which can support a lot of meetings simultaneously using P2P and application multicast technology. In the side of server, the component called Media Control Server (MCS) is responsible for t...

  15. Intelligent Decision Technologies : Proceedings of the 4th International Conference on Intelligent Decision Technologies

    CERN Document Server

    Watanabe, Toyohide; Phillips-Wren, Gloria; Howlett, Robert; Jain, Lakhmi

    2012-01-01

    The Intelligent Decision Technologies (IDT) International Conference encourages an interchange of research on intelligent systems and intelligent technologies that enhance or improve decision making. The focus of IDT is interdisciplinary and includes research on all aspects of intelligent decision technologies, from fundamental development to real applications. IDT has the potential to expand their support of decision making in such areas as finance, accounting, marketing, healthcare, medical and diagnostic systems, military decisions, production and operation, networks, traffic management, crisis response, human-machine interfaces, financial and stock market monitoring and prediction, and robotics. Intelligent decision systems implement advances in intelligent agents, fuzzy logic, multi-agent systems, artificial neural networks, and genetic algorithms, among others.  Emerging areas of active research include virtual decision environments, social networking, 3D human-machine interfaces, cognitive interfaces,...

  16. 9th International Conference on Multimedia and Ubiquitous Engineering and the 10th International Conference on Future Information Technology

    CERN Document Server

    Chao, Han-Chieh; Arabnia, Hamid; Yen, Neil; Advanced Multimedia and Ubiquitous Engineering : Future Information Technology; MUE-15; FutureTech 2015

    This volume brings together contributions representing the state-of-the-art in new multimedia and future technology information research, currently a major topic in computer science and electronic engineering. Researchers aim to interoperate multimedia frameworks, transforming the way people work and  interact with multimedia data. This book covers future information technology topics including digital and multimedia convergence, ubiquitous and pervasive computing, intelligent computing and applications, embedded systems, mobile and wireless communications, bio-inspired computing, grid and cloud computing, semantic web, human-centric computing and social networks, adaptive and context-aware computing, security and trust computing and related areas.  Representing the combined proceedings of the 9th International Conference on Multimedia and Ubiquitous Engineering (MUE-15) and the 10th International Conference on Future Information Technology (FutureTech 2015), this book aims to provide a complete coverage of...

  17. Part I.2: Perspectives on Technological Transformation

    DEFF Research Database (Denmark)

    Müller, Jens

    2003-01-01

    The article defines the technology concept as knowledge, organisation, technique and product, and describes the processes for technology analysis.......The article defines the technology concept as knowledge, organisation, technique and product, and describes the processes for technology analysis....

  18. 1st International Conference on Information and Communication Technology for Intelligent Systems

    CERN Document Server

    Das, Swagatam

    2017-01-01

    This volume contains 59 papers presented at ICTIS 2015: International Conference on Information and Communication Technology for Intelligent Systems. The conference was held during 28th and 29th November, 2015, Ahmedabad, India and organized communally by Venus International College of Technology, Association of Computer Machinery, Ahmedabad Chapter and Supported by Computer Society of India Division IV – Communication and Division V – Education and Research. This volume contains papers mainly focused on ICT for Computation, Algorithms and Data Analytics etc.

  19. Gating Technology for Vertically Parted Green Sand Moulds

    DEFF Research Database (Denmark)

    Larsen, Per

    Gating technology for vertically parted green sand moulds. Literature study of different ways of designing gating systems.......Gating technology for vertically parted green sand moulds. Literature study of different ways of designing gating systems....

  20. Part I.5: Perspectives on Technological Transformation

    DEFF Research Database (Denmark)

    Müller, Jens

    2003-01-01

    The article describes the transfer processes between the different technology and social systems......The article describes the transfer processes between the different technology and social systems...

  1. 1st International Nuclear Science and Technology Conference 2014 (INST2014)

    Science.gov (United States)

    2015-04-01

    Nuclear technology has played an important role in many aspects of our lives, including agriculture, energy, materials, medicine, environment, forensics, healthcare, and frontier research. The International Nuclear Science and Technology Conference (INST) aims to bring together scientists, engineers, academics, and students to share knowledge and experiences about all aspects of nuclear sciences. INST has evolved from a series of national conferences in Thailand called Nuclear Science and Technology (NST) Conference, which has been held for 11 times, the first being in 1986. INST2014 was held in August 2014 and hosted by Thailand Institute of Nuclear Technology (TINT). The theme was "Driving the future with nuclear technology". The conference working language was English. The proceedings were peer reviewed and considered for publication. The topics covered in the conference were: • Agricultural and food applications [AGR] • Environmental applications [ENV] • Radiation processing and industrial applications [IND] • Medical and nutritional applications [MED] • Nuclear physics and engineering [PHY] • Nuclear and radiation safety [SAF] • Other related topics [OTH] • Device and instrument presentation [DEV] Awards for outstanding oral and poster presentations will be given to qualified students who present their work during the conference.

  2. Lessons learned using Web conference technology for online focus group interviews.

    Science.gov (United States)

    Tuttas, Carol A

    2015-01-01

    Researchers use Internet technology for data collection in qualitative studies. In the literature there are published accounts of synchronous (real-time) and more commonly, asynchronous (not-real-time) focus group data collection methods supported by Internet technology in the form of email correspondence, LISTSERVs, discussion boards, and chat rooms. Real-time audiovisual Web conference technology offers qualitative researchers a promising alternative means to carry out focus groups. In this methodological article I describe how I used Web conference technology to host online focus groups for a qualitative study about job integration experiences of travel nurses geographically dispersed across the United States. I describe lessons learned from the use of this innovative method for qualitative data collection, including a brief overview about the use of dictation software for transcription. This new knowledge is useful to researchers considering Web conference technology to carry out focus group data collection in qualitative research.

  3. Part I.6: Perspectives on Technological Transformation

    DEFF Research Database (Denmark)

    Müller, Jens

    2003-01-01

    The article outlines the technological transfer processes and sums that the national systems of innovation function under highly contrasting institutional and technological settings.......The article outlines the technological transfer processes and sums that the national systems of innovation function under highly contrasting institutional and technological settings....

  4. Dual-Use Space Technology Transfer Conference and Exhibition. Volume 1

    Science.gov (United States)

    Krishen, Kumar (Compiler)

    1994-01-01

    This document contains papers presented at the Dual-Use Space Technology Transfer Conference and Exhibition held at the Johnson Space Center February 1-3, 1994. Possible technology transfers covered during the conference were in the areas of information access; innovative microwave and optical applications; materials and structures; marketing and barriers; intelligent systems; human factors and habitation; communications and data systems; business process and technology transfer; software engineering; biotechnology and advanced bioinstrumentation; communications signal processing and analysis; new ways of doing business; medical care; applications derived from control center data systems; human performance evaluation; technology transfer methods; mathematics, modeling, and simulation; propulsion; software analysis and decision tools systems/processes in human support technology; networks, control centers, and distributed systems; power; rapid development perception and vision technologies; integrated vehicle health management; automation technologies; advanced avionics; ans robotics technologies. More than 77 papers, 20 presentations, and 20 exhibits covering various disciplines were presented b experts from NASA, universities, and industry.

  5. Dual-Use Space Technology Transfer Conference and Exhibition. Volume 2

    Science.gov (United States)

    Krishen, Kumar (Compiler)

    1994-01-01

    This is the second volume of papers presented at the Dual-Use Space Technology Transfer Conference and Exhibition held at the Johnson Space Center February 1-3, 1994. Possible technology transfers covered during the conference were in the areas of information access; innovative microwave and optical applications; materials and structures; marketing and barriers; intelligent systems; human factors and habitation; communications and data systems; business process and technology transfer; software engineering; biotechnology and advanced bioinstrumentation; communications signal processing and analysis; medical care; applications derived from control center data systems; human performance evaluation; technology transfer methods; mathematics, modeling, and simulation; propulsion; software analysis and decision tools; systems/processes in human support technology; networks, control centers, and distributed systems; power; rapid development; perception and vision technologies; integrated vehicle health management; automation technologies; advanced avionics; and robotics technologies.

  6. International Conference on New Technologies in the Humanities and Fourth International Conference on Optics Within Life Sciences

    CERN Document Server

    Bally, Gert

    1997-01-01

    New high-tech developments in the field of optics show increasing applicability not only in classical technological fields but also in the humanities. This book contains selected contributions to an international, interdisciplinary joint conference on "New Technologies in the Humanities" and "Optics Within Life Sciences". Its objective is to forward interdisciplinary information and communication between specialists in optics as well as in medicine, biology, environmental sciences, and cultural heritage. It is unique as a presentation of new optical technologies for cultural heritage protection. The contributions cover international research activities in the areas of archaeological research and new technologies, holography and interferometry, material analysis, laser cleaning, pattern recognition, unconventional microscopy, spectroscopial techniques, and profilometry.

  7. Instructional Technology. Symposium 18. [Concurrent Symposium Session at AHRD Annual Conference, 2000.

    Science.gov (United States)

    2000

    Three presentations are provided from Symposium 18, Instructional Technology, of the Academy of Human Resource Development (HRD) 2000 Conference Proceedings. "Strategies for Facilitating Interaction When Using Technology-Mediated Training Methods [TMTM]" (Jeffrey S. Lewis, Gary D. Geroy, Orlando Griego) focuses on differences between…

  8. EU-Korea Conference on Science and Technology Closer to Humanity-Greenness

    CERN Document Server

    Lee, Joung Hwan; Kim, Jung-Sik; EU- Korea Conference on Science and Technology

    2010-01-01

    Current research fields in science and technology were presented and discussed at the EKC2008, informing about the interests and directions of the scientists and engineers in EU countries and Korea. The Conference has emerged from the idea of bringing together EU and Korea to get to know each other better, especially in fields of science and technology.

  9. International Conference on Advancements of Medicine and Health Care through Technology

    CERN Document Server

    Ciupa, Radu

    2014-01-01

    This volume presents the contributions of the third International Conference on Advancements of Medicine and Health Care through Technology (Meditech 2014), held in Cluj-Napoka, Romania. The papers of this Proceedings volume present new developments in - Health Care Technology, - Medical Devices, Measurement and Instrumentation, - Medical Imaging, Image and Signal Processing, - Modeling and Simulation, - Molecular Bioengineering, - Biomechanics.

  10. 2nd International Conference on Emerging Trends in Electrical, Communication and Information Technologies

    CERN Document Server

    Kumar, Amit; Sankar, V; Rao, N; Sarma, T

    2017-01-01

    This book includes the original, peer-reviewed research from the 2nd International Conference on Emerging Trends in Electrical, Communication and Information Technologies (ICECIT 2015), held in December, 2015 at Srinivasa Ramanujan Institute of Technology, Ananthapuramu, Andhra Pradesh, India. It covers the latest research trends or developments in areas of Electrical Engineering, Electronic and Communication Engineering, and Computer Science and Information.

  11. PROCEEDINGS: LOW- AND NO-VOC COATING TECHNOLOGIES - 2ND BIENNIAL INTERNATIONAL CONFERENCE

    Science.gov (United States)

    The report documents an international conference that provided a forum for the exchange of technical information on coating technologies. It focused on improved and emerging technologies that result in fewer volatile organic compound (VOC) and toxic air emissions that those from ...

  12. ICSOFT 2006 : First International Conference on Software and Data Technologies, Volume 1

    NARCIS (Netherlands)

    Filipe, Joaquim; Shishkov, Boris; Helfert, Markus

    2006-01-01

    This volume contains the proceedings of the first International Conference on Software and Data Technologies (ICSOFT 2006), organized by the Institute for Systems and Technologies of Information, Communication and Control (INSTICC) in cooperation with the Object Management Group (OMG), sponsored by

  13. 5th International Conference on Advancements of Medicine and Health Care through Technology

    CERN Document Server

    Roman, Nicolae

    2017-01-01

    This volume presents the contributions of the fifth International Conference on Advancements of Medicine and Health Care through Technology (Meditech 2016), held in in Cluj-Napoka, Romania. The papers of this Proceedings volume present new developments in - Health Care Technology, - Medical Devices, Measurement and Instrumentation, - Medical Imaging, Image and Signal Processing, - Modeling and Simulation, - Molecular Bioengineering, - Biomechanics.

  14. English for Science and Technology - Theoretical Part

    DEFF Research Database (Denmark)

    Mousten, Birthe

    The books covers the most basic, theoretical approaches to English for Science and Technology. The book is aimed at BA Students or as an introduction to English in the genres of science and technology writing.......The books covers the most basic, theoretical approaches to English for Science and Technology. The book is aimed at BA Students or as an introduction to English in the genres of science and technology writing....

  15. PREFACE: 2nd International Conference on Innovative Materials, Structures and Technologies

    Science.gov (United States)

    Ručevskis, Sandris

    2015-11-01

    The 2nd International Conference on Innovative Materials, Structures and Technologies (IMST 2015) took place in Riga, Latvia from 30th September - 2nd October, 2015. The first event of the conference series, dedicated to the 150th anniversary of the Faculty of Civil Engineering of Riga Technical University, was held in 2013. Following the established tradition, the aim of the conference was to promote and discuss the latest results of industrial and academic research carried out in the following engineering fields: analysis and design of advanced structures and buildings; innovative, ecological and energy efficient building materials; maintenance, inspection and monitoring methods; construction technologies; structural management; sustainable and safe transport infrastructure; and geomatics and geotechnics. The conference provided an excellent opportunity for leading researchers, representatives of the industrial community, engineers, managers and students to share the latest achievements, discuss recent advances and highlight the current challenges. IMST 2015 attracted over 120 scientists from 24 countries. After rigorous reviewing, over 80 technical papers were accepted for publication in the conference proceedings. On behalf of the organizing committee I would like to thank all the speakers, authors, session chairs and reviewers for their efficient and timely effort. The 2nd International Conference on Innovative Materials, Structures and Technologies was organized by the Faculty of Civil Engineering of Riga Technical University with the support of the Latvia State Research Programme under the grant agreement "INNOVATIVE MATERIALS AND SMART TECHNOLOGIES FOR ENVIRONMENTAL SAFETY, IMATEH". I would like to express sincere gratitude to Juris Smirnovs, Dean of the Faculty of Civil Engineering, and Andris Chate, manager of the Latvia State Research Programme. Finally, I would like to thank all those who helped to make this event happen. Special thanks go to Diana

  16. The 17th Annual Magnet Technology Conference Hosted By CERN Is Proving That Opposites Attract...

    CERN Multimedia

    2001-01-01

    Hundreds were drawn together by the 17th Magnet Technology Conference, the largest conference devoted to magnets in the world. Thirty-six years ago about 50 physicists and engineers came together at SLAC, Stanford, to have a symposium on magnet technology. Simple as it seemed at the moment, it was the first time that anyone seriously considered building superconducting magnets and was the birth of the Magnet Technology (MT) conference. The conference has occurred every two years since that time and had its most recent incarnation, MT-17, hosted by CERN just last week at the International Conference Centre here in Geneva. With so much innovative work being done with magnets in the LHC and its experiments (ATLAS, CMS, Alice and LHCb), having an MT conference hosted by CERN in Geneva was expected. However, what was not expected was the level of interest with which MT-17 was met. 'We are victims of our own success', says Romeo Perin who was one of the 50 physicists/engineers who attended the Stanford symposium a...

  17. 9th Annual Science and Engineering Technology Conference

    Science.gov (United States)

    2008-04-17

    O’Neill, PhD, NAE LTG USA/CTO LMC (ret) Session III: Development and Insertion of Innovative Technologies into Naval Systems · Technology...end-to-end value stream map. Technology Development ( TD ) Phase. 6 Capability to produce a prototype system or subsystem in a production relevant...key supply chain elements identified. Industrial Capabilities Assessment (ICA) for MS B completed. Technology Development ( TD ) phase leading to a

  18. The 2nd International Conference for Spatial Information Technology was Held in Huazhong University of Science and Technology

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ The Second International Conference for Spatial Information Technology 2007(ICSIT 2007) was held in Huazhong University of Science and Technology from 9 to 11 november 2007, which was co-sponsored by the Spatial Technology Academy of China Aerospace Science & Technology Corporation, the Third Academy of China Aerospace Science & Technology, the Eighth Academy of CASTC, the Unmanned Air Vehicle Society of Chinese Society of Astronautics, Qinghua University, National University of Defense Technology,Harbin Institute of Technology, Beijing University of Aeronautics and Astronautics, Northwestern Polytechnical University, University of Electronic Science and Technology of China, Huazhong University of Science and Technology and the Second Academy of CASIC, and was jointly directed by Huazhong University of Science and Technology and the Second Academy of CASIC. This grand meeting attracted more than 260 specialists hailed from home and abroad to attend, and was financially aided by the National Natural Science Foundation of China and the International Cooperation and Exchange Department of the Ministry of Education.

  19. PREFACE: International Conference on High Pressure Science and Technology, Joint AIRAPT-22 & HPCJ-50

    Science.gov (United States)

    Viña, Luis; Tejedor, Carlos; Calleja, José M.

    2010-01-01

    The International Joint AIRAPT-22 & HPCJ-50 Conference was held in Odaiba, Tokyo, on 26-31 July 2009. About 480 scientists from 24 countries attended the conference and 464 papers, including 3 plenary lectures, 39 invited talks, and 156 oral presentations, were presented. It is my great pleasure to present this proceedings volume, which is based on the high quality scientific works presented at the conference. The International AIRAPT conference has been held every two years in various countries around the world since 1965, while High Pressure Conference of Japan (HPCJ) has been held annually since 1959 in various Japanese cities. Pressure is a fundamental parameter to control the property of matter. As a result, both AIRAPT and HPCJ have become highly multidisciplinary, and cover Physics, Chemistry, Materials Science, Earth and Planetary Sciences, Biosciences, Food Science, and Technology. Although each discipline has a unique target, they all have high-pressure research in common. This proceedings volume includes about 200 papers of state-of-the-art studies from numerous fields. I hope this proceedings volume provides excellent pieces of information in various fields to further advance high-pressure research. Conference logo Takehiko Yagi Conference Chairman Institute for Solid State Physics The University of Tokyo 7 December 2009 Conference photograph Participants at the conference venue, Tokyo International Exchange Center, Odaiba, Tokyo, Japan. Editor in Chief TAKEMURA Kenichi National Institute for Materials Science, Japan Editorial board Tadashi KONDO Osaka University, Japan Hitoshi MATSUKI The University of Tokushima, Japan Nobuyuki MATUBAYASI Kyoto University, Japan Yoshihisa MORI Okayama University of Science, Japan Osamu OHTAKA Osaka University, Japan Chihiro SEKINE Muroran Institute of Technology, Japan

  20. Managing Technology Resourcefully: Part I--Technology and Instruction

    Science.gov (United States)

    Weeks, Richard

    2009-01-01

    The transformative powers of digital technology to improve student learning and the resulting effect of that technology to make the business of education more cost-effective are two of the more exciting dynamics in schooling today. Before the current school year ends, new products and upgrades will be available to replace much of the technology.…

  1. Proceedings of the 1999 Oil and Gas Conference: Technology Options for Producer Survival

    Energy Technology Data Exchange (ETDEWEB)

    None available

    2000-04-12

    The 1999 Oil & Gas Conference was cosponsored by the U.S. Department of Energy (DOE), Office of Fossil Energy, Federal Energy Technology Center (FETC) and National Petroleum Technology Office (NPTO) on June 28 to 30 in Dallas, Texas. The Oil & Gas Conference theme, Technology Options for Producer Survival, reflects the need for development and implementation of new technologies to ensure an affordable, reliable energy future. The conference was attended by nearly 250 representatives from industry, academia, national laboratories, DOE, and other Government agencies. Three preconference workshops (Downhole Separation Technologies: Is it Applicable for Your Operations, Exploring and developing Naturally Fractured Low-Permeability Gas Reservoirs from the Rocky Mountains to the Austin Chalk, and Software Program Applications) were held. The conference agenda included an opening plenary session, three platform sessions (Sessions 2 and 3 were split into 2 concurrent topics), and a poster presentation reception. The platform session topics were Converting Your Resources Into Reserves (Sessions 1 and 2A), Clarifying Your Subsurface Vision (Session 2B), and High Performance, Cost Effective Drilling, Completion, Stimulation Technologies (Session 3B). In total, there were 5 opening speakers, 30 presenters, and 16 poster presentations.

  2. 20th International Conference for Students and Young Scientists: Modern Techniques and Technologies (MTT'2014)

    Science.gov (United States)

    2014-10-01

    The active involvement of young researchers in scientific processes and the acquisition of scientific experience by gifted youth currently have a great value for the development of science. One of the research activities of National Research Tomsk Polytechnic University, aimed at the preparing and formation of the next generation of scientists, is the International Conference of Students and Young Scientists ''Modern Techniques and Technologies'', which was held in 2014 for the twentieth time. Great experience in the organization of scientific events has been acquired through years of carrying the conference. There are all the necessary resources for this: a team of organizers - employees of Tomsk Polytechnic University, premises provided with modern office equipment and equipment for demonstration, and leading scientists - professors of TPU, as well as the status of the university as a leading research university in Russia. This way the conference is able to attract world leading scientists for the collaboration. For the previous years the conference proved itself as a major scientific event at international level, which attracts more than 600 students and young scientists from Russia, CIS and other countries. The conference provides oral plenary and section reports. The conference is organized around lectures, where leading Russian and foreign scientists deliver plenary presentations to young audiences. An important indicator of this scientific event is the magnitude of the coverage of scientific fields: energy, heat and power, instrument making, engineering, systems and devices for medical purposes, electromechanics, material science, computer science and control in technical systems, nanotechnologies and nanomaterials, physical methods in science and technology, control and quality management, design and technology of artistic materials processing. The main issues considered by young researchers at the conference were related to the analysis of contemporary

  3. PREFACE: 8th International Conference on Advanced Infocomm Technology (ICAIT 2015)

    Science.gov (United States)

    Qiu, M.; Zhao, W.; Shum, P. Ping

    2016-02-01

    The 2015 IEEE 8th International Conference on Advanced Infocomm Technology (ICAIT 2015) was held in Hangzhou, China, during 25-27, October 2015, following the successes of previous events held in Shenzhan, Xi'an, Haikou, Wuhan, Paris, Hsinchu, and Fuzhou. This year the ICAIT 2015 aimed to bring together researchers, developers, and users in both industry and academia in the world for sharing state-of-art results, for exploring new areas of research and development, and to discuss emerging issues on advanced infocomm technology. The conference was hosted by Zhejiang University and China Satellite Maritime Tracking and Control Department. It was organized by the State Ley Laboratory of Modern Optical Instrumentation of Zhejiang University, in collaboration with the Joint International Research Laboratory of Photonics of Zhejiang University. More than 150 international participants from 9 foreign countries attended the conference. The ICAIT 2015 was featured with 4 plenary lectures (by Xiaoyi Bao, Benjamin J. Eggleton, Min Gu, and Chinlon Lin, respectively), and 40 invited talks, in which a wide range of topics were covered and the most recent significant results were presented. Including oral and poster presentations, 138 abstracts were presented in the conference, some of which were selected to publish in full papers in this edition of Journal of Physics: Conference Series. With the excellent quality of the presentations, the ICAIT 2015 was a success. We also wish to thank the sponsors of the conference, and particularly the technical program committee and the local organizing committee.

  4. Proceedings: 1989 conference on advanced computer technology for the power industry

    Energy Technology Data Exchange (ETDEWEB)

    Ghosh, B. (ed.)

    1990-07-01

    An EPRI conference to address advanced computer technology was hosted by Arizona Public Service in Scottsdale, Arizona, December 4--6, 1989. Participants represented US and foreign utilities, major electric and computer industry vendors, R D contractors, and consulting firms. These proceedings contain the text of the technical presentations and summaries of the panel discussions. The conference objectives were: to assess modern computer technologies and how they will affect utility operations; to share US and foreign utility experiences in developing computer-based technical products; and to discuss research conducted by EPRI in advanced computer technology on behalf of its utility members. Technical presentations addressed a broad range of computer-related topics: computer-based training; engineering workshops; hypermeida and other advanced user interfaces; networks and communications; expert systems and other decision-support methodologies; intelligent database management; supercomputing architectures and applications; real-time data processing; computerized technology and information transfer; and neural networks and other emerging technologies.

  5. A southern region conference on technology transfer and extension

    Science.gov (United States)

    Sarah F. Ashton; William G. Hubbard; H. Michael Rauscher

    2009-01-01

    Forest landowners and managers have different education and technology transfer needs and preferences. To be effective it is important to use a multi-faceted science delivery/technology transfer program to reach them. Multi-faceted science delivery programs can provide similar content over a wide range of mechanisms including printed publications, face-to-face...

  6. Advances in Computing and Information Technology : Proceedings of the Second International Conference on Advances in Computing and Information Technology

    CERN Document Server

    Nagamalai, Dhinaharan; Chaki, Nabendu

    2013-01-01

    The international conference on Advances in Computing and Information technology (ACITY 2012) provides an excellent international forum for both academics and professionals for sharing knowledge and results in theory, methodology and applications of Computer Science and Information Technology. The Second International Conference on Advances in Computing and Information technology (ACITY 2012), held in Chennai, India, during July 13-15, 2012, covered a number of topics in all major fields of Computer Science and Information Technology including: networking and communications, network security and applications, web and internet computing, ubiquitous computing, algorithms, bioinformatics, digital image processing and pattern recognition, artificial intelligence, soft computing and applications. Upon a strength review process, a number of high-quality, presenting not only innovative ideas but also a founded evaluation and a strong argumentation of the same, were selected and collected in the present proceedings, ...

  7. Conference on Future Automotive Technology Focus Electro Mobility

    CERN Document Server

    2013-01-01

    The increasing trend towards electric cars leads to several challenges for the automobile industry, research institutes and politics as well as for the society. Research and serial development move closer together to meet automotive standards with new components such as traction batteries integrated into hybrid and electrical drivetrains. Furthermore, the influence of e-mobility on the daily mobility behavior, the effects on the automotive supply chain and the impact on industrial production have to be taken into account. According to these complex aspects it is crucial to not only acquire specific knowledge in the particular fields but also to consider their functional interaction. Therefore, it seems essential to merge competence from science, economy and politics. This year, the annual „Conference on Future Automotive Technology“ as the follow-up of the „2. Automobiltechnisches Kolloquium München” focuses on the economical realization of widespread automotive electro mobility. Contents - Energy St...

  8. Bioenergy `97: Nordic Bioenergy Conference, market, environment and technology; Bioenergi `97: nordisk bioenergikonferanse, marked, miljoe og teknikk

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    (Leading abstract). The conference ``Bioenergy `97: Nordic Bioenergy Conference, market, environment and technology`` took place in Oslo, Norway, 7-8 Oct 1997. The conference papers are grouped under three headings: (1) The nordic energy market. 12 papers. (2) Production and sale of biofuels. 8 papers. (3) Conversion and utilization of biofuels. With subsections New technologies, 4 papers, and Power/heat production from biofuels, 4 papers

  9. 1st International Scientific Conference on Intelligent Information Technologies for Industry

    CERN Document Server

    Kovalev, Sergey; Tarassov, Valery; Snášel, Václav

    2016-01-01

    This volume of Advances in Intelligent Systems and Computing contains papers presented in the main track of IITI 2016, the First International Conference on Intelligent Information Technologies for Industry held in May 16-21 in Sochi, Russia. The conference was jointly co-organized by Rostov State Transport University (Russia) and VŠB – Technical University of Ostrava (Czech Republic) with the participation of Russian Association for Artificial Intelligence (RAAI) and Russian Association for Fuzzy Systems and Soft Computing (RAFSSC). The volume is devoted to practical models and industrial applications related to intelligent information systems. The conference has been a meeting point for researchers and practitioners to enable the implementation of advanced information technologies into various industries. Nevertheless, some theoretical talks concerning the-state-of-the-art in intelligent systems and soft computing are included in the proceedings as well.

  10. Proceedings of the 12. international conference on mechatronics technology : ICMT 2008

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    The theme for the 2008 international conference on mechatronics technology (ICMT) was the applications of mechatronics to natural resources to address the growing energy demands that the world will face in the future. It was attended by researchers, engineers and practitioners who presented the latest accomplishments, innovations and potential future directions in mechatronics and emerging application trends. The objective of ICMT 2008 was to facilitate dialogue among experts on issues relating to research and technological developments in mechatronics. The sessions of the conference were entitled: advanced mechatronic devices; bioengineering; human resource development and education; information and networking; mechatronic sensing and control; mechantronics and natural resources; micro-electro-mechanical systems and nano-electro-mechanical systems (MEMS-NEMS); and production systems. The conference featured 44 presentations, of which 4 have been catalogued separately for inclusion in this database. refs., tabs., figs.

  11. 2nd International Conference on Robot Intelligence Technology and Applications

    CERN Document Server

    Matson, Eric; Myung, Hyun; Xu, Peter; Karray, Fakhri

    2014-01-01

    We are facing a new technological challenge on how to store and retrieve knowledge and manipulate intelligence for autonomous services by intelligent systems which should be capable of carrying out real world tasks autonomously. To address this issue, robot researchers have been developing intelligence technology (InT) for “robots that think” which is in the focus of this book. The book covers all aspects of intelligence from perception at sensor level and reasoning at cognitive level to behavior planning at execution level for each low level segment of the machine. It also presents the technologies for cognitive reasoning, social interaction with humans, behavior generation, ability to cooperate with other robots, ambience awareness, and an artificial genome that can be passed on to other robots. These technologies are to materialize cognitive intelligence, social intelligence, behavioral intelligence, collective intelligence, ambient intelligence and genetic intelligence. The book aims at serving resear...

  12. Proceedings of the environmental technology through industry partnership conference. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    Kothari, V.P.

    1995-10-01

    The overall objective of this conference was to review the latest environmental and waste management technologies being developed under the sponsorship of METC. The focus of this conference was also to address the accomplishments and barriers affecting private sector, and lay the groundwork for future technology development initiatives and opportunities. 26 presentations were presented in: Mixed waste characterization, treatment, and disposal; Contaminant plume containment and remediation; and Decontamination and decommissioning. In addition there were 10 Focus Area presentations, 31 Poster papers covering all Focus Areas, and two panel discussions on: Mixed waste characterization, treatment, and disposal issues; and the Application, evaluation, and acceptance of in-situ and ex-situ plume remediation technologies. Volume 2 contains 16 papers in a poster session and 8 papers in the contaminant plume containment and remediation and landfill stabilization Focus Areas. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

  13. 26th Conference of Spacecraft TT&C Technology in China

    CERN Document Server

    Qian, Weiping

    2013-01-01

    Proceedings of the 26th Conference of Spacecraft TT&C Technology in China collects selected papers from the 26th Conference of Spacecraft TT&C Technology in China held in Nanjing on October 16-19, 2012. The book features state-of-the-art studies on spacecraft TT&C in China with the theme of “Shared and Flexible TT&C Systems”. The selected works can help  promote development of spacecraft TT&C technology towards interconnectivity, resource sharing, flexibility and high efficiency. Researchers and engineers in the field of aerospace engineering and communication engineering can benefit from the book. Rongjun Shen is the Academician of Chinese Academy of Engineering; Weiping Qian is the Director General of Beijing Institute of Tracking and Telecommunications Technology.

  14. IFLA General Conference, 1985. Division on Special Libraries. Section on Science and Technology Libraries. Papers.

    Science.gov (United States)

    International Federation of Library Associations, The Hague (Netherlands).

    Papers on science and technology libraries which were presented at the 1985 International Federation of Library Associations (IFLA) conference include: (1) "UAP (Universal Availability of Publications) and User Training for Categories of Grey Literature" (Dieter Schmidmaier, Mining Academy Freiberg, East Germany); (2) "Resource…

  15. Proceedings: Conference on University Education for Technology and Public Policy, December 8-10, 1976.

    Science.gov (United States)

    Hartman, Eric B., Ed.; Morgan, Robert P., Ed.

    This conference included a session on emerging curricula related to technology and public policy and a session where speakers from various universities summarized the educational approaches that have been taken. Another session brought together speakers and panelists from government, industry, and public interest groups to give their views on what…

  16. European Power Electronic conference in Aalborg, Denmark - 1000 participants discussing the future energy technologies

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Munk-Nielsen, Stig

    2007-01-01

    The European Power Electronics and Adjustable Speed Drives conference with technical sponsorship of IEEE Industrial Electronic Society has been held in Aalborg, Denmark, during the first days of September 2007 with an overwhelming success and participation. It was hosted by Aalborg University......'s Institute of Energy Technology....

  17. Persuasive technology: 11th International Conference, PERSUASIVE 2016, Salzburg, Austria, April 5-7, 2016, Proceedings

    NARCIS (Netherlands)

    Meschtscherjakov, A.; Ruyter, B.E.R. de; Fuchsberger, V.; Murer, M.; Tscheligi, M.

    2016-01-01

    This book constitutes the refereed proceedings of the 11th International Conference on Persuasive Technology, PERSUASIVE 2016, held in Salzburg, Austria, in April 2016. The 27 revised full papers and 3 revised short papers presented were carefully reviewed and selected from 73 submissions. The paper

  18. 5th International and 26th All India Manufacturing Technology, Design and Research Conference

    CERN Document Server

    Dixit, Uday

    2015-01-01

    This book presents selected research papers of the AIMTDR 2014 conference on application of laser technology for various manufacturing processes such as cutting, forming, welding, sintering, cladding and micro-machining. State-of-the-art of these technologies in terms of numerical modeling, experimental studies and industrial case studies are presented. This book will enrich the knowledge of budding technocrats, graduate students of mechanical and manufacturing engineering, and researchers working in this area.  

  19. International Conference on Emerging Technologies for Information Systems, Computing, and Management

    CERN Document Server

    Ma, Tinghuai; Emerging Technologies for Information Systems, Computing, and Management

    2013-01-01

    This book aims to examine innovation in the fields of information technology, software engineering, industrial engineering, management engineering. Topics covered in this publication include; Information System Security, Privacy, Quality Assurance, High-Performance Computing and Information System Management and Integration. The book presents papers from The Second International Conference for Emerging Technologies Information Systems, Computing, and Management (ICM2012) which was held on December 1 to 2, 2012 in Hangzhou, China.

  20. Appalachian Rivers II Conference: Technology for Monitoring, Assessing, and Restoring Streams, Rivers, and Watersheds

    Energy Technology Data Exchange (ETDEWEB)

    None available

    1999-07-29

    On July 28-29, 1999, the Federal Energy Technology Center (FETC) and the WMAC Foundation co-sponsored the Appalachian Rivers II Conference in Morgantown, West Virginia. This meeting brought together over 100 manufacturers, researchers, academicians, government agency representatives, watershed stewards, and administrators to examine technologies related to watershed assessment, monitoring, and restoration. Sessions included presentations and panel discussions concerning watershed analysis and modeling, decision-making considerations, and emerging technologies. The final session examined remediation and mitigation technologies to expedite the preservation of watershed ecosystems.

  1. International Conference on Sustainable Vital Technologies in Engineering and Informatics

    CERN Document Server

    Hassan, Maguid

    2017-01-01

    This book reports on cutting-edge technologies that have been fostering sustainable development in a variety of fields, including built and natural environments, structures, energy, advanced mechanical technologies as well as electronics and communication technologies. It reports on the applications of Geographic Information Systems (GIS), Internet-of-Things, predictive maintenance, as well as modeling and control techniques to reduce the environmental impacts of buildings, enhance their environmental contribution and positively impact the social equity. The different chapters, selected on the basis of their timeliness and relevance for an audience of engineers and professionals, describe the major trends in the field of sustainable engineering research, providing them with a snapshot of current issues together with important technical information for their daily work, as well as an interesting source of new ideas for their future research. The works included in this book were selected among the contributions...

  2. International Conference on Computer Science and Information Technology

    CERN Document Server

    Li, Xiaolong

    2014-01-01

    The main objective of CSAIT 2013 is to provide a forum for researchers, educators, engineers and government officials involved in the general areas of Computational Sciences and Information Technology to disseminate their latest research results and exchange views on the future research directions of these fields. A medium like this provides an opportunity to the academicians and industrial professionals to exchange and integrate practice of computer science, application of the academic ideas, improve the academic depth. The in-depth discussions on the subject provide an international communication platform for educational technology and scientific research for the world's universities, engineering field experts, professionals and business executives.

  3. AMA Conferences 2015. SENSOR 2015. 17th international conference on sensors and measurement technology. IRS{sup 2} 2015. 14th international conference on infrared sensors and systems. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2015-07-01

    This meeting paper contains presentations of two conferences: SENSOR 2015 and IRS{sup 2} (= International conference on InfraRed Sensors and systems). The first part of SENSOR 2015 contains the following chapters: (A) SENSOR PRINCIPLES: A.1: Mechanical sensors; A.2: Optical sensors; A.3: Ultrasonic sensors; A.4: Microacoustic sensors; A.5: Magnetic sensors; A.6: Impedance sensors; A.7: Gas sensors; A.8: Flow sensors; A.9: Dimensional measurement; A.10: Temperature and humidity sensors; A.11: Chemosensors; A.12: Biosensors; A.13: Embedded sensors; A.14: Sensor-actuator systems; (B) SENSOR TECHNOLOGY: B.1: Sensor design; B.2: Numerical simulation of sensors; B.3: Sensor materials; B.4: MEMS technology; B.5: Micro-Nano-Integration; B.6: Packaging; B.7: Materials; B.8: Thin films; B.9: Sensor production; B.10: Sensor reliability; B.11: Calibration and testing; B.12: Optical fibre sensors. (C) SENSOR ELECTRONICS AND COMMUNICATION: C.1: Sensor electronics; C.2: Sensor networks; C.3: Wireless sensors; C.4: Sensor communication; C.5: Energy harvesting; C.6: Measuring systems; C.7: Embedded systems; C.8: Self-monitoring and diagnosis; (D) APPLICATIONS: D.1: Medical measuring technology; D.2: Ambient assisted living; D.3: Process measuring technology; D.4: Automotive; D.5: Sensors in energy technology; D.6: Production technology; D.7: Security technology; D.8: Smart home; D.9: Household technology. The second part with the contributions of the IRS{sup 2} 2015 is structured as follows: (E) INFRARED SENSORS: E.1: Photon detectors; E.2: Thermal detectors; E.3: Cooled detectors; E.4: Uncooled detectors; E.5: Sensor modules; E.6: Sensor packaging. (G) INFRARED SYSTEMS AND APPLICATIONS: G.1: Thermal imaging; G.2: Pyrometry / contactless temperature measurement; G.3: Gas analysis; G.4: Spectroscopy; G.5: Motion control and presence detection; G.6: Security and safety monitoring; G.7: Non-destructive testing; F: INFRARED SYSTEM COMPONENTS: F.1: Infrared optics; F.2: Optical

  4. 11th Annual CMMI Technology Conference and User Group

    Science.gov (United States)

    2011-11-17

    Change Management Team - Responsibilities Vision Dialogue Resources Congruence Anticipation Empowerment Transition Alignment Change...maintenance and disease prevention/treatment • Several areas of study: computer science, software/ systems engineering, IT, HCI , social dynamics...market needs to happen very quickly Source: SEI HCI : Human Computer Interaction; AI: Artificial intelligence 24 11th Annual CMMI ® Technology

  5. 5. annual clean coal technology conference: powering the next millennium. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    The Fifth Annual Clean Coal Technology Conference focuses on presenting strategies and approaches that will enable clean coal technologies to resolve the competing, interrelated demands for power, economic viability, and environmental constraints associated with the use of coal in the post-2000 era. The program addresses the dynamic changes that will result from utility competition and industry restructuring, and to the evolution of markets abroad. Current projections for electricity highlight the preferential role that electric power will have in accomplishing the long-range goals of most nations. Increase demands can be met by utilizing coal in technologies that achieve environmental goals while keeping the cost- per-unit of energy competitive. Results from projects in the DOE Clean Coal Technology Demonstration Program confirm that technology is the pathway to achieving these goals. The industry/government partnership, cemented over the past 10 years, is focused on moving the clean coal technologies into the domestic and international marketplaces. The Fifth Annual Clean Coal Technology Conference provides a forum to discuss these benchmark issues and the essential role and need for these technologies in the post-2000 era. This volume contains technical papers on: advanced coal process systems; advanced industrial systems; advanced cleanup systems; and advanced power generation systems. In addition, there are poster session abstracts. Selected papers from this proceedings have been processed for inclusion in the Energy Science and Technology database.

  6. 3rd ACIS International Conference on Applied Computing and Information Technology

    CERN Document Server

    2016-01-01

    This edited book presents scientific results of the 3nd International Conference on Applied Computing and Information Technology (ACIT 2015) which was held on July 12-16, 2015 in Okayama, Japan. The aim of this conference was to bring together researchers and scientists, businessmen and entrepreneurs, teachers, engineers, computer users, and students to discuss the numerous fields of computer science and to share their experiences and exchange new ideas and information in a meaningful way. Research results about all aspects (theory, applications and tools) of computer and information science, and to discuss the practical challenges encountered along the way and the solutions adopted to solve them.

  7. 11th Biennial Conference on Emerging Mathematical Methods, Models and Algorithms for Science and Technology

    CERN Document Server

    Manchanda, Pammy; Bhardwaj, Rashmi

    2015-01-01

    The present volume contains invited talks of 11th biennial conference on “Emerging Mathematical Methods, Models and Algorithms for Science and Technology”. The main message of the book is that mathematics has a great potential to analyse and understand the challenging problems of nanotechnology, biotechnology, medical science, oil industry and financial technology. The book highlights all the features and main theme discussed in the conference. All contributing authors are eminent academicians, scientists, researchers and scholars in their respective fields, hailing from around the world.

  8. 1st International Conference on Communities and Technologies

    CERN Document Server

    Wenger, Etienne; Wulf, Volker

    2003-01-01

    The book contains 24 research articles related to the emerging research field of Communities and Technologies (C&T). The papers treat subjects such as online communities, communities of practice, Community support systems, Digital Cities, regional communities and the internet, knowledge sharing and communities, civil communities, communities and education and social capital. As a result of a very quality-oriented review process, the work reflects the best of current research and practice in the field of C&T.

  9. Workshop and conference on Grand Challenges applications and software technology

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-31

    On May 4--7, 1993, nine federal agencies sponsored a four-day meeting on Grand Challenge applications and software technology. The objective was to bring High-Performance Computing and Communications (HPCC) Grand Challenge applications research groups supported under the federal HPCC program together with HPCC software technologists to: discuss multidisciplinary computational science research issues and approaches, identify major technology challenges facing users and providers, and refine software technology requirements for Grand Challenge applications research. The first day and a half focused on applications. Presentations were given by speakers from universities, national laboratories, and government agencies actively involved in Grand Challenge research. Five areas of research were covered: environmental and earth sciences; computational physics; computational biology, chemistry, and materials sciences; computational fluid and plasma dynamics; and applications of artificial intelligence. The next day and a half was spent in working groups in which the applications researchers were joined by software technologists. Nine breakout sessions took place: I/0, Data, and File Systems; Parallel Programming Paradigms; Performance Characterization and Evaluation of Massively Parallel Processing Applications; Program Development Tools; Building Multidisciplinary Applications; Algorithm and Libraries I; Algorithms and Libraries II; Graphics and Visualization; and National HPCC Infrastructure.

  10. 2nd International Conference on Education and Educational Technology (EET 2011)

    CERN Document Server

    Education and Educational Technology

    2012-01-01

    This volume includes extended and revised versions of a set of selected papers from the 2011 2nd International Conference on Education and Educational Technology (EET 2011) held in Chengdu, China, October 1-2, 2011. The mission of EET 2011 Volume 1 is to provide a forum for researchers, educators, engineers, and government officials involved in the general areas of education and educational technology to disseminate their latest research results and exchange views on the future research directions of these fields. 130 related topic papers were selected into this volume. All the papers were reviewed by 2 program committee members and selected by the volume editor Prof. Yuanzhi Wang, from Intelligent Information Technology Application Research Association, Hong Kong. The conference will bring together leading researchers, engineers and scientists in the domain of interest. We hope every participant can have a good opportunity to exchange their research ideas and results and to discuss the state of the art in th...

  11. PREFACE: 1st International Conference on Sensing for Industry, Control, Communication & Security Technologies

    Science.gov (United States)

    Shuja Syed, Ahmed

    2013-12-01

    The 1st International Conference on Sensing for Industry, Control, Communication & Security Technologies (ICSICCST-2013), took place in Karachi, Pakistan, from 24-26 June 2013. It was organized by Indus University, Karachi, in collaboration with HEJ Research Institute of Chemistry, University of Karachi, Karachi. More than 80 abstracts were submitted to the conference and were double blind-reviewed by an international scientific committee. The topics of the Conference were: Video, Image & Voice Sensing Sensing for Industry, Environment, and Health Automation and Controls Laser Sensors and Systems Displays for Innovative Applications Emerging Technologies Unmanned, Robotic, and Layered Systems Sensing for Defense, Homeland Security, and Law Enforcement The title of the conference, 'Sensing for Industry, Control, Communication & Security Technologies' is very apt in capturing the main issues facing the industry of Pakistan and the world. We believe the sensing industry, particularly in Pakistan, is currently at a critical juncture of its development. The future of the industry will depend on how the industry players choose to respond to the challenge of global competition and opportunities arising from strong growth in the Asian region for which we are pleased to note that the conference covered a comprehensive spectrum of issues with an international perspective. This will certainly assist industry players to make informed decisions in shaping the future of the industry. The conference gathered qualified researchers from developed countries like USA, UK, Sweden, Saudi Arabia, China, South Korea and Malaysia etc whose expertise resulting from the research can be drawn upon to build an exploitable area of new technology that has potential Defense, Homeland Security, and Military applicability. More than 250 researchers/students attended the event and made the event great success as the turnout was 100%. An exceptional line-up of speakers spoke at the occasion. We want

  12. 2014 International Conference on Simulation and Modeling Methodologies, Technologies and Applications

    CERN Document Server

    Ören, Tuncer; Kacprzyk, Janusz; Filipe, Joaquim

    2015-01-01

    The present book includes a set of selected extended papers from the 4th International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2014), held in Vienna, Austria, from 28 to 30 August 2014. The conference brought together researchers, engineers and practitioners interested in methodologies and applications of modeling and simulation. New and innovative solutions are reported in this book. SIMULTECH 2014 received 167 submissions, from 45 countries, in all continents. After a double blind paper review performed by the Program Committee, 23% were accepted as full papers and thus selected for oral presentation. Additional papers were accepted as short papers and posters. A further selection was made after the Conference, based also on the assessment of presentation quality and audience interest, so that this book includes the extended and revised versions of the very best papers of SIMULTECH 2014. Commitment to high quality standards is a major concern of SIMULTEC...

  13. 5th International Conference on Simulation and Modeling Methodologies, Technologies and Applications

    CERN Document Server

    Kacprzyk, Janusz; Ören, Tuncer; Filipe, Joaquim

    2016-01-01

    The present book includes a set of selected extended papers from the 5th International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2015), held in Colmar, France, from 21 to 23 July 2015. The conference brought together researchers, engineers and practitioners interested in methodologies and applications of modeling and simulation. New and innovative solutions are reported in this book. SIMULTECH 2015 received 102 submissions, from 36 countries, in all continents. After a double blind paper review performed by the Program Committee, 19% were accepted as full papers and thus selected for oral presentation. Additional papers were accepted as short papers and posters. A further selection was made after the Conference, based also on the assessment of presentation quality and audience interest, so that this book includes the extended and revised versions of the very best papers of SIMULTECH 2015. Commitment to high quality standards is a major concern of SIMULTECH t...

  14. 9th FTRA International Conference on Future Information Technology

    CERN Document Server

    Pan, Yi; Kim, Cheon-Shik; Yang, Yun

    2014-01-01

    The new multimedia standards (for example, MPEG-21) facilitate the seamless integration of multiple modalities into interoperable multimedia frameworks, transforming the way people work and interact with multimedia data. These key technologies and multimedia solutions interact and collaborate with each other in increasingly effective ways, contributing to the multimedia revolution and having a significant impact across a wide spectrum of consumer, business, healthcare, education, and governmental domains.  This book aims to provide a complete coverage of the areas outlined and to bring together the researchers from academic and industry as well as practitioners to share ideas, challenges, and solutions relating to the multifaceted aspects of this field.

  15. PREFACE: 21th International Conference for Students and Young Scientists: Modern Technique and Technologies (MTT'2015)

    Science.gov (United States)

    2015-10-01

    Involving young researchers in the scientific process, and allowing them to gain scientific experience, are important issues for scientific development. The International Conference for Students and Young Scientists ''Modern Technique and Technologies'' is one of a number of scientific events, held at National Research Tomsk Polytechnic University aimed at training and forming the scientific elite. During previous years the conference established itself as a serious scientific event at an international level, attracting members which annually number about 400 students and young scientists from Russia and near and far abroad. An important indicator of this scientific event is the large number of scientific areas covered, such as power engineering, heat power engineering, electronic devices for monitoring and diagnostics, instrumentation, materials and technologies of new generations, methods of research and diagnostics of materials, automatic control and system engineering, physical methods science and engineering, design and artistic aspects of engineering, social and humanitarian aspects of engineering. The main issues, which are discussed at the conference by young researchers, are connected with analysis of contemporary problems, application of new techniques and technologies, and consideration of their relationship. Over the years, the conference committee has gained a lot of experience in organizing scientific meetings. There are all the necessary conditions: the staff of organizers includes employees of Tomsk Polytechnic University; the auditoriums are equipped with modern demonstration and office equipment; leading scientists are TPU professors; the status of the Tomsk Polytechnic University as a leading research university in Russia also plays an important role. All this allows collaboration between leading scientists from all around the world, who are annually invited to give lectures at the conference. The editorial board expresses gratitude to the

  16. 2013 International Conference on Electrical and Information Technologies for Rail Transportation

    CERN Document Server

    Liu, Zhigang; Qin, Yong; Zhao, Minghua; Diao, Lijun

    2014-01-01

    Proceedings of the 2013 International Conference on Electrical and Information Technologies for Rail Transportation (EITRT2013) collects the latest research in this field, including a wealth of state-of-the-art research theories and applications in intelligent computing, information processing, communication technology, automatic control, etc. The objective of the proceedings is to provide a major interdisciplinary forum for researchers, engineers, academics and industrial professionals to present the most innovative research on and developments in the field of rail transportation electrical and information technologies. Contributing authors from academia, industry and the government also offer inside views of new, interdisciplinary solutions.

  17. 2013 World Conference on Information Systems and Technologies (WorldCIST’13)

    CERN Document Server

    Correia, Ana; Wilson, Tom; Stroetmann, Karl; Advances in Information Systems and Technologies

    2013-01-01

    This book contains a selection of articles from The 2013 World Conference on Information Systems and Technologies (WorldCIST'13), a global forum for researchers and practitioners to present and discuss the most recent innovations, trends, results, experiences and concerns in the several perspectives of Information Systems and Technologies. The main topics covered are: Information and Knowledge Management; Organizational Models and Information Systems; Intelligent and Decision Support Systems; Software Systems, Architectures, Applications and Tools; Computer Networks, Mobility and Pervasive Systems; Radar Technologies; and Human-Computer Interaction.

  18. 8th KES International Conference on Intelligent Decision Technologies

    CERN Document Server

    Caballero, Alfonso; Howlett, Robert; Jain, Lakhmi

    2016-01-01

    The KES-IDT-2016 proceedings give an excellent insight into recent research, both theoretical and applied, in the field of intelligent decision making. The range of topics explored is wide, and covers methods of grouping, classification, prediction, decision support, modelling and many more in such areas as finance, linguistics, medicine, management and transportation. This proceedings contain several sections devoted to specific topics, such as: · Specialized Decision Techniques for Data Mining, Transportation and Project Management · Pattern Recognition for Decision Making Systems · New Advances of Soft Computing in Industrial and Management Engineering · Recent Advances in Fuzzy Systems · Intelligent Data Analysis and Applications · Reasoning-based Intelligent Systems · Intelligent Methods for Eye Movement Data Processing and Analysis · Intelligent Decision Technologies for Water Resources Management · Intelligent Decision Making for Uncertain Unstructured Big Data · Decision Making Theory for Ec...

  19. ALT-C 95: Changing Education, Changing Technology. Conference Abstracts of the Association for Learning Technology Conference (2nd, Milton Keynes, England, United Kingdom, September 11-13, 1995).

    Science.gov (United States)

    Hawkridge, David, Ed.

    This program for the 1995 Association for Learning Technology Conference summarizes the presentations of the discussions, demonstrations, workshops, and poster sessions. Abstracts of the following papers presented at the conference are included: "New Structures for Learning" (Patrick Allen & Kate Sankey); "Multiple System…

  20. ALT-C 95: Changing Education, Changing Technology. Conference Abstracts of the Association for Learning Technology Conference (2nd, Milton Keynes, England, United Kingdom, September 11-13, 1995).

    Science.gov (United States)

    Hawkridge, David, Ed.

    This program for the 1995 Association for Learning Technology Conference summarizes the presentations of the discussions, demonstrations, workshops, and poster sessions. Abstracts of the following papers presented at the conference are included: "New Structures for Learning" (Patrick Allen & Kate Sankey); "Multiple System Conferencing" (Susan…

  1. Conference

    CERN Multimedia

    Association du personnel

    2013-01-01

    A new integrated model for dementia management A Greek interdisciplinary scientific group proposes new technologies, novel neuroscientific concepts and advanced socio-economic and administrational organisation to ease the management of dementia in elderly Dr. Kostas Petsanis Thursday 23 May from 6.30 p.m. to 8.00 p.m. Council Chamber The general economic crisis while being a nightmare for the society, it has also given way to a new kind of reorganization and living. Elderly people come up against many health problems. A society of elders needs flexible solutions in every day living in order to avoid social and health stalemates. The mood and cognition in the elderly turn out to be doubtful and problematic. These situations give rise to a continuously growing number of depressed and demented elderly people with catastrophic results to the quality of life and social management. Αn interdisciplinary group of greek scientists proposes a novel advanced process of ambient interaction for elderly peo...

  2. Secure quantum signatures: a practical quantum technology (Conference Presentation)

    Science.gov (United States)

    Andersson, Erika

    2016-10-01

    Modern cryptography encompasses much more than encryption of secret messages. Signature schemes are widely used to guarantee that messages cannot be forged or tampered with, for example in e-mail, software updates and electronic commerce. Messages are also transferrable, which distinguishes digital signatures from message authentication. Transferability means that messages can be forwarded; in other words, that a sender is unlikely to be able to make one recipient accept a message which is subsequently rejected by another recipient if the message is forwarded. Similar to public-key encryption, the security of commonly used signature schemes relies on the assumed computational difficulty of problems such as finding discrete logarithms or factoring large primes. With quantum computers, such assumptions would no longer be valid. Partly for this reason, it is desirable to develop signature schemes with unconditional or information-theoretic security. Quantum signature schemes are one possible solution. Similar to quantum key distribution (QKD), their unconditional security relies only on the laws of quantum mechanics. Quantum signatures can be realized with the same system components as QKD, but are so far less investigated. This talk aims to provide an introduction to quantum signatures and to review theoretical and experimental progress so far.

  3. 2nd International Conference on Education and Educational Technology (EET 2011)

    CERN Document Server

    Education Management, Education Theory and Education Application

    2012-01-01

    This volume includes extended and revised versions of a set of selected papers from the 2011 2nd International Conference on Education and Educational Technology (EET 2011) held in Chengdu, China, October 1-2, 2011. The mission of EET 2011 Volume 2 is to provide a forum for researchers, educators, engineers, and government officials involved in the general areas of education management, education theory and education application to disseminate their latest research results and exchange views on the future research directions of these fields. 133 related topic papers were selected into this volume. All the papers were reviewed by 2 program committee members and selected by the volume editor Prof. Yuanzhi Wang, from Intelligent Information Technology Application Research Association, Hong Kong. The conference will bring together leading researchers, engineers and scientists in the domain of interest. We hope every participant can have a good opportunity to exchange their research ideas and results and to discus...

  4. International Conference on Modern Mathematical Methods and High Performance Computing in Science and Technology

    CERN Document Server

    Srivastava, HM; Venturino, Ezio; Resch, Michael; Gupta, Vijay

    2016-01-01

    The book discusses important results in modern mathematical models and high performance computing, such as applied operations research, simulation of operations, statistical modeling and applications, invisibility regions and regular meta-materials, unmanned vehicles, modern radar techniques/SAR imaging, satellite remote sensing, coding, and robotic systems. Furthermore, it is valuable as a reference work and as a basis for further study and research. All contributing authors are respected academicians, scientists and researchers from around the globe. All the papers were presented at the international conference on Modern Mathematical Methods and High Performance Computing in Science & Technology (M3HPCST 2015), held at Raj Kumar Goel Institute of Technology, Ghaziabad, India, from 27–29 December 2015, and peer-reviewed by international experts. The conference provided an exceptional platform for leading researchers, academicians, developers, engineers and technocrats from a broad range of disciplines ...

  5. Transforming global health with mobile technologies and social enterprises: global health and innovation conference.

    Science.gov (United States)

    Kayingo, Gerald

    2012-09-01

    More than 2,000 people convened for the ninth annual Global Health and Innovation Conference at Yale University on April 21-22, 2012. Participants discussed the latest innovations, ideas in development, lessons learned, opportunities and challenges in global health activities. Several themes emerged, including the important role of frontline workers, strengthening health systems, leveraging social media, and sustainable and impact-driven philanthropy. Overall, the major outcome of the conference was the increased awareness of the potential of mobile technologies and social enterprises in transforming global health. Experts warned that donations and technological advances alone will not transform global health unless there are strong functioning health infrastructures and improved workforce. It was noted that there is a critical need for an integrated systems approach to global health problems and a need for scaling up promising pilot projects. Lack of funding, accountability, and sustainability were identified as major challenges in global health.

  6. Tech transfer outreach. An informal proceedings of the first technology transfer/communications conference

    Energy Technology Data Exchange (ETDEWEB)

    Liebetrau, S. [ed.

    1992-10-01

    This document provides an informal summary of the conference workshop sessions. ``Tech Transfer Outreach!`` was originally designed as an opportunity for national laboratory communications and technology transfer staff to become better acquainted and to discuss matters of mutual interest. When DOE field office personnel asked if they could attend, and then when one of our keynote speakers became a participant in the discussions, the actual event grew in importance. The conference participants--the laboratories and DOE representatives from across the nation--worked to brainstorm ideas. Their objective: identify ways to cooperate for effective (and cost-effective) technology transfer outreach. Thus, this proceedings is truly a product of ten national laboratories and DOE, working together. It candidly presents the discussion of issues and the ideas generated by each working group. The issues and recommendations are a consensus of their views.

  7. 7th International Conference in Methodologies and Intelligent Systems for Technology Enhanced Learning

    CERN Document Server

    Gennari, Rosella; Mascio, Tania; Rodríguez, Sara; Prieta, Fernando; Ramos, Carlos; Silveira, Ricardo

    2017-01-01

    This book presents the outcomes of the 7th International Conference in Methodologies and Intelligent Systems for Technology Enhanced Learning (MIS4TEL'17), hosted by the Polytechnic of Porto, Portugal from 21 to 23 June 2017. Expanding on the topics of the previous conferences, it provided an open forum for discussing intelligent systems for technology enhanced learning (TEL) and their roots in novel learning theories, empirical methodologies for their design or evaluation, stand-alone and web-based solutions, and makerspaces. It also fostered entrepreneurship and business startup ideas, bringing together researchers and developers from industry, education and the academic world to report on the latest scientific research, technical advances and methodologies.

  8. Recent Achievements in Simulated Moving Bed (SMB Technology. Part II

    Directory of Open Access Journals (Sweden)

    Roje, M.

    2010-09-01

    Full Text Available Progress in the method of simulated moving bed (SMB technology and some important achievements in separation of specific classes of racemic compounds of therapeutic interest are reported in the Part I of this review. Part II describes novel methods of SMB technology. Complex technologies,such as the combination of SMB and biocatalytic reactions, and SMB with crystallization process, are presented. VariCol variant of SMB, and its application in the separation of the racemic mixtures of commercial and academic interest are discussed. In the conclusive section, comments are given concerning the economic dimension and the market of enantiomerically pure compounds.

  9. 8th International Conference on Computer Science and its Applications (CSA-16) and the 11st International Conference on Ubiquitous Information Technologies and Applications (CUTE 2016)

    CERN Document Server

    Pan, Yi; Yi, Gangman; Loia, Vincenzo

    2017-01-01

    This book presents the combined proceedings of the 8th International Conference on Computer Science and its Applications (CSA-16) and the 11st International Conference on Ubiquitous Information Technologies and Applications (CUTE 2016), both held in Bangkok, Thailand, December 19 - 21, 2016. The aim of these two meetings was to promote discussion and interaction among academics, researchers and professionals in the field of ubiquitous computing technologies. These proceedings reflect the state-of-the-art in the development of computational methods, involving theory, algorithm, numerical simulation, error and uncertainty analysis and novel application of new processing techniques in engineering, science, and other disciplines related to ubiquitous computing.

  10. New technologies and alternative feedstocks in petrochemistry and refining. Preprints of the conference

    Energy Technology Data Exchange (ETDEWEB)

    Ernst, S.; Jess, A.; Lercher, J.A.; Lichtscheidl, J.; Marchionna, M. (eds.)

    2013-11-01

    This international conference paper provides a forum for chemists and engineers from refinery, petrochemistry and the chemical industry as well as from academia to discuss new technologies and alternative feedstocks in petrochemistry and refining with the special topic ''Shale Gas, Heavy Oils and Coal''. 23 Lectures and 18 Posters are presented. All papers are analyzed for the ENERGY database.

  11. ic-cmtp3: 3rd International Conference on Competitive Materials and Technology Processes

    Science.gov (United States)

    2016-04-01

    Competitiveness is one of the most important factors in our lives and it plays a key role in the efficiency both of organizations and societies. The more scientifically advanced and prepared organizations develop more competitive materials with better physical, chemical, and biological properties, and the leading companies apply more competitive equipment and technological processes. The aims of the 3rd International Conference on Competitive Materials and Technology Processes (ic-cmtp3), and the 1st International Symposium on Innovative Carbons and Carbon Based Materials (is-icbm1) and the 1st International Symposium on Innovative Construction Materials (is-icm1) organized alongside are the following: —Promote new methods and results of scientific research in the fields of material, biological, environmental and technological sciences; —Exchange information between the theoretical and applied sciences as well as technical and technological implementations; —Promote communication and collaboration between the scientists, researchers and engineers of different nations, countries and continents. Among the major fields of interest are advanced and innovative materials with competitive characteristics, including mechanical, physical, chemical, biological, medical and thermal, properties and extreme dynamic strength. Their crystalline, nano - and micro-structures, phase transformations as well as details of their technological processes, tests and measurements are also in the focus of the ic-cmtp3 conference and the is-scbm1 and is-icm1 symposia. Multidisciplinary applications of material science and the technological problems encountered in sectors like ceramics, glasses, thin films, aerospace, automotive and marine industries, electronics, energy, construction materials, medicine, biosciences and environmental sciences are of particular interest. In accordance with the program of the ic-cmtp3 conference and is-icbm1 and is-icm1 symposia we have received more

  12. Proceedings of the 2012 International Conference on Information Technology and Software Engineering : Software Engineering & Digital Media Technology

    CERN Document Server

    Cai, Guoqiang; Liu, Weibin; Xing, Weiwei

    2013-01-01

    Proceedings of the 2012 International Conference on Information Technology and Software Engineering presents selected articles from this major event, which was held in Beijing, December 8-10, 2012. This book presents the latest research trends, methods and experimental results in the fields of information technology and software engineering, covering various state-of-the-art research theories and approaches. The subjects range from intelligent computing to information processing, software engineering, Web, unified modeling language (UML), multimedia, communication technologies, system identification, graphics and visualizing, etc. The proceedings provide a major interdisciplinary forum for researchers and engineers to present the most innovative studies and advances, which can serve as an excellent reference work for researchers and graduate students working on information technology and software engineering. Prof. Wei Lu, Dr. Guoqiang Cai, Prof. Weibin Liu and Dr. Weiwei Xing all work at Beijing Jiaotong Uni...

  13. PREFACE: 2nd International Conference on Competitive Materials and Technological Processes (IC-CMTP2)

    Science.gov (United States)

    László, Gömze A.

    2013-12-01

    Competitiveness is one of the most important factors in our life and it plays a key role in the efficiency both of organizations and societies. The more scientifically supported and prepared organizations develop more competitive materials with better physical, chemical and biological properties and the leading companies apply more competitive equipment and technology processes. The aims of the 2nd International Conference on Competitive Materials and Technology Processes (ic-cmtp2) are the following: Promote new methods and results of scientific research in the fields of material, biological, environmental and technology sciences; Change information between the theoretical and applied sciences as well as technical and technological implantations. Promote the communication between the scientist of different nations, countries and continents. Among the major fields of interest are materials with extreme physical, chemical, biological, medical, thermal, mechanical properties and dynamic strength; including their crystalline and nano-structures, phase transformations as well as methods of their technological processes, tests and measurements. Multidisciplinary applications of materials science and technological problems encountered in sectors like ceramics, glasses, thin films, aerospace, automotive and marine industry, electronics, energy, construction materials, medicine, biosciences and environmental sciences are of particular interest. In accordance to the program of the conference ic-cmtp2, more than 250 inquiries and registrations from different organizations were received. Researchers from 36 countries in Asia, Europe, Africa, North and South America arrived at the venue of conference. Including co-authors, the research work of more than 500 scientists are presented in this volume. Professor Dr Gömze A László Chair, ic-cmtp2 The PDF also contains lists of the boards, session chairs and sponsors.

  14. Third International Conference on Computational Science, Engineering and Information Technology (CCSEIT-2013), v.1

    CERN Document Server

    Kumar, Ashok; Annamalai, Annamalai

    2013-01-01

      This book is the proceedings of Third International Conference on Computational Science, Engineering and Information Technology (CCSEIT-2013) that was held in Konya, Turkey, on June 7-9. CCSEIT-2013 provided an excellent international forum for sharing knowledge and results in theory, methodology and applications of computational science, engineering and information technology. This book contains research results, projects, survey work and industrial experiences representing significant advances in the field. The different contributions collected in this book cover five main areas: algorithms, data structures and applications;  wireless and mobile networks; computer networks and communications; natural language processing and information theory; cryptography and information security.  

  15. Conference Paper NFO-7:7th International Conference on Near-Field Optics and Related Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Prof.Dr. Lukas Novotny

    2004-10-18

    The seventh conference in the NFO conference series, held here in Rochester, provided to be the principal forum for advances in sub-wavelength optics, near-field optical microscopy, local field enhancement, instrumental developments and the ever-increasing range of applications. This conference brought together the diverse scientific communities working on the theory and application of near-field optics (NFO) and related techniques.

  16. NIH-IEEE 2015 Strategic Conference on Healthcare Innovations and Point-of-Care Technologies for Prec

    Science.gov (United States)

    NIH and the Institute for Electrical and Electronics Engineering, Engineering in Medicine and Biology Society (IEEE/EMBS) hosted the third iteration of the Healthcare Innovations and Point-of-Care Technologies Conference last week.

  17. Proceedings: 1989 conference on advanced computer technology for the power industry

    Energy Technology Data Exchange (ETDEWEB)

    Ghosh, B. (ed.)

    1990-07-01

    An EPRI conference to address advanced computer technology was hosted by Arizona Public Service in Scottsdale, Arizona, December 4--6, 1989. Participants represented US and foreign utilities, major electric and computer industry vendors, R D contractors, and consulting firms. These Proceedings contain the text of the technical presentations and summaries of the panel discussions. The conference objectives were: to asses modern computer technologies and how they will effect utility operations; to share US and foreign utility experiences in developing computer-based technical products; and to discuss research conducted by EPRI in advanced computer technology on behalf of its utility members. Technical presentations addressed a broad range of computer-related topics: Computer-Based Training, Engineering Workstations, Hypermedia and Other Advanced User Interfaces, Networks and Communications, Expert Systems and Other Decision-Support Methodologies, Intelligent Database Management, Supercomputing Architectures and Applications, Real-Time Data Processing, Computerized Technology and Information Transfer, and Neural Networks and Other Emerging Technologies. In addition, two panel sessions were conducted to provide a forum for utilities to discuss past and future directions of EPRI software, and the future role of engineering workstations in utilities. The results of these two panels are summarized in this paper.

  18. PRODUCTION OF PROTOTYPE PARTS USING DIRECT METAL LASER SINTERING TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Josef Sedlak

    2015-08-01

    Full Text Available Unconventional methods of modern materials preparation include additive technologies which involve the sintering of powders of different chemical composition, granularity, physical, chemical and other utility properties. The technology called Rapid Prototyping, which uses different technological principles of producing components, belongs to this type of material preparation. The Rapid Prototyping technology facilities use photopolymers, thermoplastics, specially treated paper or metal powders. The advantage is the direct production of metal parts from input data and the fact that there is no need for the production of special tools (moulds, press tools, etc.. Unused powder from sintering technologies is re-used for production 98% of the time, which means that the process is economical, as well as ecological.The present paper discusses the technology of Direct Metal Laser Sintering (DMLS, which falls into the group of additive technologies of Rapid Prototyping (RP. The major objective is a detailed description of DMLS, pointing out the benefits it offers and its application in practice. The practical part describes the production and provides an economic comparison of several prototype parts that were designed for testing in the automotive industry.

  19. 26th Annual GCSSEPM Foundation Bob F.Perkins Research Conference on "Reservoir characterization:integrating technology and business practices"

    Institute of Scientific and Technical Information of China (English)

    Roger M. Slatt

    2007-01-01

    @@ The 2006 26th Annual GCSSEPM Foundation Bob F. Perkins Research Conference on "Reservoir characterization: Integrating technology and business practices" presented a solid testimonial to how far we have advanced in the technologies and practices of reservoir characterization since the 1990 AAPG-SEG-SPE-SPWLA 1st Archie Conference on "Integration of Geology, Geophysics, Petrophysics, and Petroleum Engineering in Reservoir Delineation, Description and Management".

  20. 5{sup th} international geothermal conference. Conference volume. Risk management, financing, power plant technology, EGS/HFR

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, Jochen; Hoffmann, Nadine; Brian, Marcus (eds.)

    2009-07-01

    Within the 5th International Geothermal Conference at 27th to 28th April, 2009, in Freiburg (Federal Republic of Germany) the following lectures were held: (a) Worldwide development of geothermal energy (Ladislaus Rypach); (b) Geothermal developments and applications in Turkey (Orhan Mertoglu); (c) Guermat Elektrik: Turkish experiences in geothermal financings (John F. Wolfe); (d) Geothermal exploration success: Using data and best practices from the oil and gas industry (Jan-Diederik van Wees); (e) Implementing geothermal power projects - risk management and financing from the investor's point of view (Christian Jokiel); (f) Risks and risk mitigation in the Upper Rhine Graben geothermal province (Christian Hecht); (g) The Soultz geothermal plant: from the concept to the first geothermal kWh (Albert Genter); (h) Binary power plant technologies for geothermal power generation (Kathrin Rohloff); (i) Kalina power plants - 10 years of operational experience (Gestur R. Bardarson); (j) 1,200 MW experience with innovative geothermal power plants (Hilel Legmann); (k) Challenges of managing geothermal power plant projects (Norbert Hartlieb); (l) Requirements for geothermal power plants (Athanasios Tsoubaklis); (m) Credit programme on productivity risk in deep geothermal projects (Karin Freier, Peter Hasenbein, Stephan Jacob); (n) Geothermal projects in the light of the financial crisis (Thomas G. Engelmann); (o) Insurability of geothermal projects (Matthias Kliesch); (p) Requirements for equity investors to finance a geothermal project (Thoma G. Engelmann); (q) Aspects of project development from an investor's perspective (Bernhard Gubo); (r) Project requirements and challenges in geothermal projects (Olaf Heil); (s) The 'quest' for appropriate locations for HFR projects in Southern Germany (Wolfgang Bauer); (t) Status of the Soultz geothermal power plant and the deep reservoir after some months of circulation (Albert Genter); (u) Hot

  1. Europe, Middle East and North Africa Conference on Technology and Security to Support Learning 2016

    CERN Document Server

    Serrhini, Mohammed; Felgueiras, Carlos

    2017-01-01

    This book contains a selection of articles from The Europe, Middle East and North Africa Conference on Technology and Security to Support Learning 2016 (EMENA-TSSL'16), held between the 3th and 5th of October at Saidia, Oujda, Morocco. EMENA-TSSL'16 is a global forum for researchers and practitioners to present and discuss recent results and innovations, current trends, professional experiences and challenges in Information & Communication Technologies, and Security to support Learning. The main topics covered are: A) Online Education; B) Emerging Technologies in Education; C) Artificial Intelligence in Education; D) Gamification and Serious games; E) Network & Web Technologies Applications; F) Online experimentation and Virtual Laboratories; G) Multimedia Systems and Applications; H) Security and Privacy; I) Multimedia, Computer Vision and Image Processing; J) Cloud, Big Data Analytics and Applications; K) Human-Computer Interaction; L) Software Systems, Architectures, Applications and Tools; M) Onli...

  2. EDITORIAL: The 4th International Conference on Sensing Technology (ICST 2010) The 4th International Conference on Sensing Technology (ICST 2010)

    Science.gov (United States)

    Lay Ekuakille, Aimé; Mukhopadhyay, Subhas C.

    2011-12-01

    Sensor systems are one the most requested topics in the field of engineering. The importance of sensors, their technologies and their applications is self-evident through their impact on daily life. The features of sensors can still be improved and this is a matter of increasing research in the international scientific community. Several papers have been selected and reviewed to constitute a recipe for understanding advances in the area of sensors. Although they are few in number, the papers accepted for publication in this special feature of Measurement Science and Technology reflect current trends in the related areas, that is to say, resistive chemical sensing, new transducers, and applications in robotics, in olfaction and in image processing. In addition to these topics, the concept of the functionalization of nanotubes is also of great interest, as is the subject of nanowires. We thank the authors of this special feature for their contributions with dedicated papers in the areas of sensors and sensor systems. We also thank MST for hosting this special feature in order to give further expression to authors from ICST2010, the International Conference on Sensing Technology that took place in Lecce (Italy) in 2010.

  3. 6th International Conference in Methodologies and intelligent Systems for Technology Enhanced Learning

    CERN Document Server

    Prieta, Fernando; Mascio, Tania; Gennari, Rosella; Rodríguez, Javier; Vittorini, Pierpaolo

    2016-01-01

    The 6th International Conference in Methodologies and intelligent Systems for Technology Enhanced Learning held in Seville (Spain) is host by the University of Seville from 1st to 3rd June, 2016. The 6th edition of this conference expands the topics of the evidence-based TEL workshops series in order to provide an open forum for discussing intelligent systems for TEL, their roots in novel learning theories, empirical methodologies for their design or evaluation, stand-alone solutions or web-based ones. It intends to bring together researchers and developers from industry, the education field and the academic world to report on the latest scientific research, technical advances and methodologies.

  4. Cleaner coal technology and its commercial implementation. Conference documentation and information

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    This conference analyses the enormous potential of new markets for cleaner coal technologies as well as analysing what the implications of legislation hold for those involved in power generation. It also discusses how technology can be effectively utilised to meet environmental performance requirements, as well as competitive, operational and economic performance parameters. Specific regional requirements and opportunities as well as the implications of important agreements such as those reached at Kyoto are analysed. Technological issues are discussed with particular reference to use of by-products of coal fired stations blending techniques; plant upgrading and the concept of zero emission coal. Presented papers are abstracted separately for the IEA Coal Research coal database CD-ROM.

  5. 2nd International Conference on Electrical Systems, Technology and Information 2015

    CERN Document Server

    Tanoto, Yusak; Lim, Resmana; Santoso, Murtiyanto; Pah, Nemuel

    2016-01-01

    This book includes the original, peer-reviewed research papers from the 2nd International Conference on Electrical Systems, Technology and Information (ICESTI 2015), held in September 2015 at Patra Jasa Resort & Villas Bali, Indonesia. Topics covered include: Mechatronics and Robotics, Circuits and Systems, Power and Energy Systems, Control and Industrial Automation, and Information Theory.    It explores emerging technologies and their application in a broad range of engineering disciplines, including communication technologies and smart grids. It examines hybrid intelligent and knowledge-based control, embedded systems, and machine learning. It also presents emerging research and recent application in green energy system and storage. It discusses the role of electrical engineering in biomedical, industrial and mechanical systems, as well as multimedia systems and applications, computer vision and image and signal processing. The primary objective of this series is to provide references for disseminat...

  6. Oak Ridge National Laboratory Technology Logic Diagram. Volume 2, Technology Logic Diagram: Part B, Remedial Action

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1 (Technology Evaluation), Vol. 2 (Technology Logic Diagram), and Vol. 3 (Technology Evaluation Data Sheets). Part A of Vols. 1. and 2 focuses on D&D. Part B of Vols. 1 and 2 focuses on the RA of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TLD, an explanation of the program-specific responsibilities, a review of identified technologies, and the rankings of remedial technologies. Volume 2 (Pts. A, B, and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A, B, and C) contains the TLD data sheets. Remedial action is the focus of Vol. 2, Pt. B, which has been divided into the three necessary subelements of the RA: characterization, RA, and robotics and automation. Each of these sections address general ORNL problems, which are then broken down by problem area/constituents and linked to potential remedial technologies. The diagrams also contain summary information about a technology`s status, its science and technology needs, and its implementation needs.

  7. 12th European Conference on Accelerators in Applied Research and Technology

    Science.gov (United States)

    Sajavaara, Timo; Tarvainen, Olli; Javanainen, Arto; Räisänen, Jyrki

    2017-09-01

    The 12th European Conference on Accelerators in Applied Research and Technology was organized by Department of Physics on the 3rd -8th July 2016 in the Agora building of the University of Jyväskylä in Finland. This was the first time ECAART was held in Nordic countries. There were in total 141 participants from 31 countries and six industrial exhibitors. The largest foreign delegation was from Japan with 25 participants. The scientific programme included 13 invited lectures, 29 oral and 112 poster presentations. There were altogether 14 exhibitors and sponsors.

  8. Proceedings of the 7. international conference on circulating fluidized bed technology. 7. vol. ed.

    Energy Technology Data Exchange (ETDEWEB)

    Grace, J.R. (ed.) [British Columbia Univ., Vancouver, BC (Canada). Dept. of Chemical and Biological Engineering; Zhu, J.; De Lasa, H. [Western Ontario University, London, ON (Canada). Dept. of Biochemical and Chemical Engineering

    2002-07-01

    This conference brought together all of the major circulating fluidized bed (CFB) research groups from around the world and provided a major source of information on CFB and related topics. These proceedings focus on applications and fundamentals of CFB technology, including fluid catalytic cracking of hydrocarbons, CFB combustion of coal, calcination, gasification, pyrolysis, roasting of ores, and desulphurization. Several papers discussed the application of computational fluid dynamics to CFB, hydrodynamics, heat transfer and combustion. Discussions also focused on the importance of maintaining safety, providing sufficient heat transfer, and minimizing emissions of particulates and gaseous pollutants. The 9 sessions of the conference were entitled as follows: (1) invited overview papers, (2) downers, (3) heat and mass transfer, (4) hydrodynamics and mixing, (5) computational fluid dynamics and other models, (6) liquid fluidization and three-phase systems, (7) solids separation and return systems, (8) combustion and other gas-solid reactions, and (9) fluid catalytic cracking and other reactions. More than 100 papers were presented at the conference, of which 25 have been indexed separately for inclusion in this database. refs., tabs., figs.

  9. Proceedings of the IASTED technology conferences : MS, CA, WC, EME, SOE 2010

    Energy Technology Data Exchange (ETDEWEB)

    Alhajj, R.S.; Leung, V.C.M.; Saif, M.; Thring, R. (eds.)

    2010-08-13

    This conference on energy and power systems provided a forum for electric power industry experts and international researchers to discuss the latest research and innovative technologies related to power system modelling and simulation (MS); control and applications (CA); wireless communications (WC); environment management and engineering (EME); and, solar energy (SOE). The MS theme was divided into tracks entitled: applications of modelling and simulation; data modelling; energy and power systems modelling; intelligent optimization and modelling; mathematical modelling; modelling and simulation methodologies; Monte Carlo simulation; virtual reality; and workflow management and probabilistic modelling. The CA theme was divided into tracks entitled: electric drive and energy systems; intelligent and robotic systems; time varying and time delay systems; control system design; engineering applications of control; and non-engineering applications of control. The WC theme was divided into tracks entitled: wireless communications; wireless networks; and cognitive radio networks and systems. The EME theme was divided into tracks entitled: natural resources management; environmental impact assessment; land management; and waste management. The final track of the conference was on solar energy. The conference featured 143 presentations, of which 24 have been catalogued separately for inclusion in this database. refs., tabs., figs.

  10. 2nd International Conference on Ion Implantation in Semiconductors, Physics and Technology, Fundamental and Applied Aspects

    CERN Document Server

    Graul, Jürgen

    1971-01-01

    In recent years great progress has been made in the field of ion implantation, particularly with respect to applications in semiconductors. It would be impos­ sible not to note the growing interest in this field, both by research groups and those directly concerned with production of devices. Furthermore, as several papers have pointed out, ion implantation and its associated technologies promise exciting advances in the development of new kinds of devices and provide power­ ful new tools for materials investigations. It was, therefore, appropriate to arrange the II. International Conference on Ion Implantation in Semiconductors within the rather short time of one year since the first conference was held in 1970 in Thousand Oaks, California. Although ori­ ginally planned on a small scale with a very limited number of participants, more than two hundred scientists from 15 countries participated in the Conference which was held May 24 - 28, 1971 at the Congress Center in Garmisch-Partenkirchen. This volume c...

  11. PREFACE: EPS Euroconference XIX Nuclear Physics Divisional Conference: New Trends in Nuclear Physics Applications and Technology

    Science.gov (United States)

    2006-06-01

    It was with great pleasure that the Department of Nuclear and Theoretical Physics of the University of Pavia and the INFN (Istituto Nazionale di Fisica Nucleare) Structure of Pavia organised the XIX Nuclear Physics Divisional Conference of the European Physical Society, which was held in the historical buildings of the University of Pavia from 5-9 September 2005. The Conference was devoted to the discussion of the most recent experimental and theoretical achievements in the field of Nuclear Physics applications, as well as of the latest developments in technological tools related to Nuclear Physics research. The University of Pavia has a long tradition in Physics and in Applied Physics, being the site where Alessandro Volta developed his "pila", the precursor of the modern battery. This is the place where the first experiments with electricity were conducted and where the term "capacitance" used for capacitors was invented. Today the University hosts a Triga Mark II nuclear reactor, which is used by the Departments of the University of Pavia and by other Universities and private companies as well. Moreover, Pavia is the site selected for the construction of the CNAO complex "Centro Nazionale di Adroterapia Oncologica" (National Centre for Oncological Hadrontherapy), planned for 2005-2008 which represents a unique facility in Italy and will be among the first complexes of this type in Europe. The Conference has gathered together experts in various fields from different countries and has been the occasion to review the present status and to discuss the new emerging trends in Nuclear Physics and its applications to multidisciplinary researches and the development of new technologies. The following topics were treated: Nuclear Techniques in Medicine and Life Sciences (Cancer Therapy, new Imaging and Diagnostics Tools, Radioisotope production, Radiation Protection and Dosimetry). Applications of Nuclear Techniques in Art, Archaeometry and other Interdisciplinary fields

  12. WFIRST-AFTA Overview Technology needs summary Mirror Technology Conference 2015

    Science.gov (United States)

    Marx, Catherine (Editor); Content, David; Zhao, Feng

    2015-01-01

    Presentation covers the overview of the science and hardware of the WFIRST-AFTA (Wide-Field Infrared Survey Telescope) (Astrophysics Focused Telescope Assets) mission. It includes an overview of the technology, with an emphasis on optics technology. It also introduces the WFIRST talks that come later, one on the Wide Field Instrument filters and the other on the CoronaGraph Instrument.

  13. 6th Conference on Coal Utilization Technology; Dai 6 kai sekitan riyo gijutsu kaigi koenshu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-09-01

    The paper compiled the papers presented in the 6th Conference on Coal Utilization Technology held in September 1996. With relation to the fluidized bed boiler, reported were Field operation test of Wakamatsu PFBC combined cycle power plant and Development of pressurized internally circulating fluidized bed combustion technology. Regarding the coal reformation, Development of advanced coal cleaning process, Coal preparation and coal cleaning in the dry process, etc. Concerning the combustion technology, Study of the O2/CO2 combustion technology, Development of pressurized coal partial combustor, etc. About the CWM, Development of low rank coals upgrading and their CWM producing technology, Technique of CWM distribution system, etc. Relating to the coal ash, Engineering characteristics of the improved soil by deep mixing method using coal ash, Employment of fluidized bed ash as a basecourse material, On-site verification trials using fly ash for reclamation behind bulkheads, Water permeabilities of pulverized fuel ash, Separation of unburned carbon from coal fly ash through froth flotation, Practical use technology of coal ash (POZ-O-TEC), etc

  14. Information Management Basics in a New Technological Era. Proceedings of the 1984 CAUSE National Conference (Orlando, Florida, December 1984).

    Science.gov (United States)

    CAUSE, Boulder, CO.

    Proceedings of the 1984 CAUSE conference on information management and new technologies are presented. Contents include 49 papers covering seven subject areas: issues in higher education, managing the information resource, innovative technologies, office automation/networking, microcomputer issues and applications, promises and perils of…

  15. Why ethics should be part of health technology assessment.

    Science.gov (United States)

    Hofmann, Bjørn Morten

    2008-01-01

    From the heydays of HTA in the 1970s, it has been argued that ethics should be a part of HTA. Despite more than 30 years with repeated intentions, only few HTA reports include ethical analysis, and there is little agreement on methods for integrating ethics. This poses the question of why it is so important to integrate ethics in HTA? The article analyzes ten arguments for making ethics part of HTA. The validity of the arguments depend on what we mean by "integrating," "ethics," and "HTA." Some of the counterarguments explain why it has taken so long to integrate ethics in HTA and why there are so many ethical approaches. Nevertheless, some of the arguments for making ethics part of HTA appear to be compelling. Health care is a moral endeavor, and the vast potential of technology poses complex moral challenges. A thorough assessment of technology would include reflection on these moral aspects. Ethics provides such a moral reflection. Health technology is a way to improve the life of human individuals. This involves questions of what "the good life" is, and hence ethical issues. Trying to ignore such questions may inflict with the moral foundation of health care: to help people. Additionally, HTA is an evaluation, and as such also a reflection on values. Hence, there is a profound affinity between HTA and ethics. Accordingly, ethics cannot be "integrated" in HTA as ethics is already a constitutive part of HTA. However, ethics can be acknowledged and emphasized.

  16. 1989 Review Conference on New Electronic Technologies for the Elderly: Issues and Projects. Report of an Aspen Institute Conference (5th, Queenstown, Maryland, March 8-10, 1989). Communications and Society Forum Report #11.

    Science.gov (United States)

    Bollier, David

    This document presents summaries of conference presentations which attempted to assess how computer and communications technologies can be harnessed to meet the special needs of elderly people. Each of the eight sessions of the conference opened with experts discussing their respective research projects and electronic technologies: their origins,…

  17. 3rd International Conference on Simulation and Modeling Methodologies, Technologies and Applications

    CERN Document Server

    Koziel, Slawomir; Kacprzyk, Janusz; Leifsson, Leifur; Ören, Tuncer

    2015-01-01

    This book includes extended and revised versions of a set of selected papers from the 3rd International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2013) which was co-organized by the Reykjavik University (RU) and sponsored by the Institute for Systems and Technologies of Information, Control and Communication (INSTICC). SIMULTECH 2013 was held in cooperation with the ACM SIGSIM - Special Interest Group (SIG) on SImulation and Modeling (SIM), Movimento Italiano Modellazione e Simulazione (MIMOS) and AIS Special Interest Group on Modeling and Simulation (AIS SIGMAS) and technically co-sponsored by the Society for Modeling & Simulation International (SCS), Liophant Simulation, Simulation Team and International Federation for Information Processing (IFIP). This proceedings brings together researchers, engineers, applied mathematicians and practitioners working in the advances and applications in the field of system simulation.

  18. European Conference on the Use of Modern Information and Communication Technologies

    CERN Document Server

    2014-01-01

    This proceeding present the outcome of the 6th. European Conference on the Use of Modern Information and Communication Technologies. The ECUMICT 2014 was hold in Gent in March 2014 and presented recent research, that has a close relationship with practical implementation of Security for mobile communications and data access Interface technology for mobile devices Application development for mobile devices Positioning and localization, asset tracking and tracing Design and applications of RFID systems Developments in the framework of IoT and M2M communications Design and applications of WSNs Embedded programming for WSNs New developments and applications of WPAN/WLAN standards Mobile multimedia systems Wireless telecommunication networks and mobile services Optimization techniques in wireless networks Developments in ad-hoc and mesh networks Applications of digital signal processing for mobile applications Applications of MEMs in WSNs

  19. Proceedings of the 12th Space Photovoltaic Research and Technology Conference (SPRAT 12)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-05-01

    The Twelfth Space Photovoltaic Research and Technology conference was held at the NASA Lewis Research Center from 20 to 22 Oct. 1992. The papers and workshops presented in this volume report substantial progress in a variety of areas in space photovoltaics. Topics covered include: high efficiency GaAs and InP solar cells, GaAs/Ge cells as commercial items, flexible amorphous and thin film solar cells (in the early stages of pilot production), high efficiency multiple bandgap cells, laser power converters, solar cell and array technology, heteroepitaxial cells, betavoltaic energy conversion, and space radiation effects in InP cells. Space flight data on a variety of cells were also presented. Separate abstracts have been prepared for articles from this report.

  20. Digital video technology - today and tomorrow: 11th office information technology conference

    Energy Technology Data Exchange (ETDEWEB)

    Liberman, J.

    1994-10-01

    Digital video is probably computing`s fastest moving technology today. Just three years ago, the zenith of digital video technology on the PC was the successful marriage of digital text and graphics with analog audio and video by means of expensive analog laser disc players and video overlay boards. The state of the art involves two different approaches to fully digital video on computers: hardware-assisted and software-only solutions.

  1. Additive manufacturing technology in spare parts supply chain

    DEFF Research Database (Denmark)

    Li, Yao; Jia, Guozhu; Yang, Cheng

    2017-01-01

    Additive Manufacturing (AM) technology has the potential to significantly improve supply chain dynamics. The purpose of this paper is to investigate the impact of AM on spare parts supply chain. Three supply chain scenarios are investigated in this paper, namely conventional supply chain......, centralised AM-based supply chain and distributed AM-based supply chain. Based on system dynamics simulations, this paper specifically compares three supply chain scenarios, in terms of total variable cost and carbon emission. The results show the spare part supply chain utilising AM is indeed superior...... to the traditional one in sustainable performance. It is also expected that AM can facilitate the spare parts supply chain to achieve more economic benefits along with its development. To our knowledge, this paper is one of the early studies that explores the impact of AM on supply chain performance...

  2. Additive manufacturing technology in spare parts supply chain

    DEFF Research Database (Denmark)

    Li, Yao; Jia, Guozhu; Yang, Cheng

    2016-01-01

    Additive Manufacturing (AM) technology has the potential to significantly improve supply chain dynamics. The purpose of this paper is to investigate the impact of AM on spare parts supply chain. Three supply chain scenarios are investigated in this paper, namely conventional supply chain......, centralised AM-based supply chain and distributed AM-based supply chain. Based on system dynamics simulations, this paper specifically compares three supply chain scenarios, in terms of total variable cost and carbon emission. The results show the spare part supply chain utilising AM is indeed superior...... to the traditional one in sustainable performance. It is also expected that AM can facilitate the spare parts supply chain to achieve more economic benefits along with its development. To our knowledge, this paper is one of the early studies that explores the impact of AM on supply chain performance...

  3. Human Enhancement Technologies. Verso nuovi modelli antropologici Parte I

    Directory of Open Access Journals (Sweden)

    Luca Lo Sapio

    2013-01-01

    Full Text Available This paper deals with the important topic of human enhancement and tries to focus the question under a new perspective. The international debate is focused around two main theoretical positions: bio-conservatorism and techno-enthusiasm. We seem to be forced to choose one or another conception in order to understand the relationship between human beings and technology. The first part of the paper analyzes different authors trying to circumscribe the principal features of each one. We can notice two main paradigms which are incapable to rightly understand the phenomenon we are considering. The relieves emerging in the first part will be suitable to prosecute the analysis in the second part of the work.

  4. International Conference on Applications of Photonic Technology, Communications, Sensing, Materials and Signal Processing

    CERN Document Server

    Lessard, Roger; ICAPT '96; Applications of photonic technology 2

    1997-01-01

    This book presents a current review ofphotonic technologies and their applications. The papers published in this book are extended versions of the papers presented at the Inter­ national Conference on Applications ofPhotonic Technology (ICAPT'96) held in Montreal, Canada, on July 29 to August 1, 1996. The theme of this event was "Closing the Gap Between Theory, Developments and Applications. " The term photonics covers both optics and optical engineering areas of growing sci­ entific and commercial importance throughout the world. It is estimated that photonic tech­ nology-related applications to increase exponentially over the next few years and will play a significant role in the global economy by reaching a quarter of a trillion of US dollars by the year 2000. The global interest and advancements of this technology are represented in this book, where leading scientists of twenty-two countries with advanced technology in photon­ ics present their latest results. The papers selected herein are ...

  5. Annual Science and Engineering Technology Conference/DOD Technology Exposition (7th). Volume 2. Wednesday - Thursday

    Science.gov (United States)

    2006-04-20

    to engine teams thru AF code AF added strong staff/tech support (AQR) Interview, Dr.P. Bevilaqua, NAE Skunk-PM, Invented Lift Fan FIRST: STO-SSDash-VL...wafer-scale Pilot Line for rapid technology development Producing 4” QVGA backplanes and TDs Tools, materials and processes developed to enable...Centers of Excellence • Co-Funded by AFOSR, TD and University • Extends the capabilities and scope of AFRL • Opens up opportunity for continued focus on AF

  6. Proceedings of the Sixth International Conference on Management Science and Engineering Management : Focused on Electrical and Information Technology

    CERN Document Server

    Yasinzai, Masoom; Lev, Benjamin

    2013-01-01

    Welcome to the proceedings of the Sixth International Conference on Management Science and Engineering Management (ICMSEM2012) held from November 11 to 14, 2012 at Quaid-i-Azam University, Islamabad, Pakistan and supported by Sichuan University (Chengdu, China), Quaid-i-Azam University (Islamabad, Pakistan) and The National Natural Science Foundation of China. The International Conference on Management Science and Engineering Management is the annual conference organized by the International Society of Management Science and Engineering Management. The goals of the Conference are to foster international research collaborations in Management Science and Engineering Management as well as to provide a forum to present current research results. The papers are classified into 8 sections: Computer and Networks, Information Technology, Decision Support System, Industrial Engineering, Supply Chain Management, Project Management, Manufacturing and Ecological Engineering. The key issues of the sixth ICMSEM cover variou...

  7. Emerging Computation and Information teChnologies for Education : Proceeding of 2012 International Conference on Emerging Computation and Information teChnologies for Education

    CERN Document Server

    Xu, Linli; Tian, Wenya

    2012-01-01

    The 2012 International Conference on Emerging Computation and Information teChnologies for Education (ECICE 2012) was  held on Jan. 15-16, 2012, Hangzhou, China.  The main results of the conference are presented in this proceedings book of carefully reviewed and accepted paper addressing the hottest issues in emerging computation and information technologies used for education. The volume covers a wide series of topics in the area, including Computer-Assisted Education, Educational Information Systems, Web-based Learning, etc.

  8. 10th International Conference on Vibration Engineering and Technology of Machinery

    CERN Document Server

    2015-01-01

    The VETOMAC-X Conference covered a holistic plethora of relevant topics in vibration and engineering technology including condition monitoring, machinery and structural dynamics, rotor dynamics,  experimental techniques, finite element model updating, industrial case studies, vibration control and energy harvesting, and signal processing. These proceedings contain not only all of the nearly one-hundred peer-reviewed presentations from authors representing more than twenty countries, but also include six invited lectures from renowned experts: Professor K. Gupta, Mr W. Hahn, Professor A.W. Lees, Professor John Mottershead, Professor J.S. Rao, and Dr P. Russhard. This work is of interest to researchers and practitioners alike, and is an essential book for most of libraries of higher academic institutes.

  9. Cold rolling precision forming of shaft parts theory and technologies

    CERN Document Server

    Song, Jianli; Li, Yongtang

    2017-01-01

    This book presents in detail the theory, processes and equipment involved in cold rolling precision forming technologies, focusing on spline and thread shaft parts. The main topics discussed include the status quo of research on cold rolling precision forming technologies; the design and calculation of process parameters; the numerical simulation of cold rolling forming processes; and the equipment used in cold rolling forming. The mechanism of cold rolling forming is extremely complex, and research on the processes, theory and mechanical analysis of spline cold rolling forming has remained very limited to date. In practice, the forming processes and production methods used are mainly chosen on the basis of individual experience. As such, there is a marked lack of both systematic, theory-based guidelines, and of specialized books covering theoretical analysis, numerical simulation, experiments and equipment used in spline cold rolling forming processes – all key points that are included in this book and ill...

  10. 7th FTRA International Conference on Future Information Technology (FutureTech 2012)

    CERN Document Server

    Leung, Victor; Wang, Cho-Li; Shon, Taeshik; Advances in Complex Data Modeling and Computational Methods in Statistics

    2012-01-01

    This book is about Future Information Technology, Application, and Service (FutureTech 2012 volume 2). The topics of FutureTech 2012 cover the current hot topics satisfying the world-wide ever-changing needs. The FutureTech 2012 is intended to foster the dissemination of state-of-the-art research in all future IT areas, including their models, services, and novel applications associated with their utilization. The FutureTech 2012 will provide an opportunity for academic and industry professionals to discuss the latest issues and progress in this area. In addition, the conference will publish high quality papers which are closely related to the various theories, modeling, and practical applications in many types of future technology. The main scope of FutureTech 2012 is as follows. Hybrid Information Technology Cloud and Cluster Computing Ubiquitous Networks and Wireless Communications Multimedia Convergence Intelligent and Pervasive Applications Security and Trust Computing IT Management and Service Bioinfo...

  11. PROCEEDINGS OF THE 2001 NATIONAL OILHEAT RESEARCH ALLIANCE TECHNOLOGY CONFERENCE HELD AT BROOKHAVEN NATIONAL LABORATORY, UPTON, N.Y., APRIL 30 - MAY 1, 2001.

    Energy Technology Data Exchange (ETDEWEB)

    MCDONALD, R.J.

    2001-04-30

    BNL is proud to acknowledge all of our 2001 sponsors, with their help and support this has correctly become an oilheat industry conference. It is quite gratifying to see an industry come together to help support an activity like the technology conference, for the benefit of the industry as a whole and to celebrate the beginning of the National Oilheat Research Alliance. This meeting is the fourteenth oil heat industry technology conference to be held since 1984 and the first under a new name, NORA, the National Oilheat research Alliance, and the very first in the new century. The conference is a very important part of the effort in technology transfer, which is supported by the Oilheat Research Program. The Oilheat Research Program at BNL is under the newly assigned program management at the Office of Power Technology within the US DOE. The foremost reason for the conference is to provide a platform for the exchange of information and perspectives among international researchers, engineers, manufacturers, service technicians, and marketers of oil-fired space-conditioning equipment. The conference provides a conduit by which information and ideas can be exchanged to examine present technologies, as well as helping to develop the future course for oil heating advancement. These conferences also serve as a stage for unifying government representatives, researchers, fuel oil marketers, and other members of the oil-heat industry in addressing technology advancements in this important energy use sector. The specific objectives of the conference are to: (1) Identify and evaluate the current state-of-the-art and recommend new initiatives for higher efficiency, a cleaner environment, and to satisfy consumer needs cost-effectively, reliably, and safely; (2) Foster cooperative interactions among federal and industrial representatives for the common goal of sustained economic growth and energy security via energy conservation. Seventeen technical presentations will be made

  12. BioSTEC 2017: 10th International Joint Conference on Biomedical Engineering Systems and Technologies : Proceedings Volume 5: HealthInf

    NARCIS (Netherlands)

    2017-01-01

    This book contains the proceedings of the 10th International Joint Conference on Biomedical Engineering Systems and Technologies (BIOSTEC 2017). This conference is sponsored by the Institute for Systems and Technologies of Information, Control and Communication (INSTICC), in cooperation with the ACM

  13. Proceedings of the Tenth Annual National Conference on Ada Technology. Held in Arlington, VA, on February 24-28, 1992

    Science.gov (United States)

    1992-02-01

    and a dynamic model- Both of these models are mmo=tato thereviewand mainmenance ofasoftwa=sysem The dynamic model, however, is te only one . Deutsch ...verbs) and "Zarf’ ( adverbs ) along with 10th Annual National Conference on ADA Technology 1992 77 their relationship to the objects in the The

  14. Technology Corner: Visualising Forensic Data: Evidence Guidelines (Part 2

    Directory of Open Access Journals (Sweden)

    Damian Schofield

    2013-06-01

    Full Text Available Visualisation is becoming increasingly important for understanding information, such as investigative data (for example: computing, medical and crime scene evidence and analysis (for example, network capability assessment, data file reconstruction and planning scenarios. Investigative data visualisation is used to reconstruct a scene or item and is used to assist the viewer (who may well be a member of the general public with little or no understanding of the subject matter to understand what is being presented. Analysis visualisations, on the other hand, are usually developed to review data, information and assess competing scenario hypotheses for those who usually have an understanding of the subject matter.Courtroom environments are morphing into cinematic display environments, the media consumed by an audience who are increasingly visually literate and media savvy (Heintz, 2002. There are a number of fundamental implications inherent in the shift from oral to visual mediation and a number of facets of this modern evidence presentation technology needs to be investigated and analysed. One of the primary issues of visualisation is that no matter how coherent the data, there will always be conjecture and debate as to how the information is/has-been visualised and, is it presented in an acceptable and meaningful way.This paper presents a range of examples of where forensic data has been visualised using various techniques and technology, the paper then examines aspects of the visual courtroom evidence presented and discusses some of the benefits and potential problems of implementing this technology. This paper is part two of a two-part series that aims to describe the use of, and provide guidelines for, the use of graphical displays in courtrooms.

  15. Diagnosis of occlusal caries: Part II. Recent diagnostic technologies.

    Science.gov (United States)

    Tam, L E; McComb, D

    2001-09-01

    Accurate diagnosis of the presence or absence of disease is a fundamental requirement in health care. The diagnosis of non-overt occlusal decay is challenging and can be highly subjective, and its inherent uncertainties can lead to widely differing treatment decisions. The purpose of this 2-part paper is to review current knowledge concerning conventional and new diagnostic methods for occlusal caries. Part I looked at established methods for diagnosing occlusal decay. These methods have several limitations, particularly in their ability to diagnose early carious lesions. Part II examines new and emerging technologies that are being developed for the diagnosis of occlusal decay. Electrical conductance measurements and quantitative laser- or light-induced fluorescence represent significant improvements over conventional diagnostic methods, especially for in vitro applications and particularly with regard to sensitivity and reproducibility. Proponents of the DIAGNOdent laser fluorescence system claim that it evaluates the fluorescence that develops when laser light is incident on areas of demineralization. This noninvasive device is simple to use and provides quantitative data. Studies supporting its validity are limited but do suggest good sensitivity and excellent reproducibility. However, the DIAGNOdent system requires more scientific scrutiny. Although it offers a high rate of disease detection, it has little ability to indicate the extent of decay. In all treatment decisions, clinicians must be aware of the limitations of the diagnostic methods that have been used. Clinical judgment based on the patient s case history, visual cues, review of radiographs and probability of disease is still the most important aspect of optimum patient care. New technologies may provide supplemental information, but they cannot yet replace established methods for the diagnosis of occlusal caries.

  16. Educational Technology for the Clever Country. Selected Papers from the Conference of the Australian Society for Educational Technology (Adelaide, South Australia, Australia, October 1-3, 1992).

    Science.gov (United States)

    Hedberg, John G., Ed.; Steele, James, Ed.

    This proceeding includes the following 28 papers selected from the 1992 Conference of the Australian Society for Educational Technology: "Ecunet, Edith Cowan University's Video Conferencing Network: Two Years On" (Michael Grant); "Navigation Options in Interactive Multimedia" (John G. Hedberg & Barry Harper); "The…

  17. 11TH Annual Science and Engineering Technology Conference/DoD Tech Exposition

    Science.gov (United States)

    2010-04-15

    Technologies, Inc. Mr. John Maguire Georgia Tech Research Institute Mr. Roger Mann Lockheed Martin Corporation Dr. Todd Marek Scientific Research...Pandemic Disease Manmade Disasters Illegal Migration UNCLASSIFIED UNCLASSIFIED 5 60 Organizations are part of our Team!!! Public Safety Canada Transport...Resources (e.g., Illegal Fishing) • Pandemic Disease – HIV/AIDS • Insufficient Means to Confront Challenges •Dependence on Foreign Assistance 11.7

  18. Standardization of quantum technologies and QKD activities within ETSI (Conference Presentation)

    Science.gov (United States)

    Lenhart, Gaby

    2016-04-01

    In order to establish new ICT technologies successfully on the market it is essential to build trust within any potential users. This is especially true for technologies which are based upon paradigms that are not yet familiar to these users, such as quantum technologies. Technical standards are an excellent means to offer a certain degree of legal reliability and technical interoperability that is required by industry for commercial take up. While such standards on the one hand must be clear enough to provide strict rules for implementers, on the other hand they also must remain flexible enough to not restrict progress in further research and development on the standardized technology. Hence such standards have to be produced by a wide variety of stakeholders taking into account all their different needs. The paper will provide some insight into the general mechanisms of standardization and their relation to quantum technologies. Alongside with the relevance of standardization as an enabler for certification of quantum based technologies it will explain its potential for securing intellectual property. In its first part paper will concentrate on the advantages of standardization and discuss fears some of the stakeholders share, in detail. The second part will focus on the technical work going on in ETSI in relation to quantum technologies. In 2008 ETSI created a standards work group on Quantum Key Distribution, the ETSI ISG QKD and more recently a group on Quantum-Safe Cryptography, the ETSI ISG QSC. A significant part of the technical work of these groups has already been published and will be introduced in the following. However a big share of work is still ongoing and lot more is planned for the future, as are continuous revisions and updates of the published specifications. This standardization work covers several levels: It starts of by problem statements in the form of use cases, from which technical requirements can be derived. These requirements then form

  19. 77 FR 48169 - The Information Technology Agreement: Advice and Information on the Proposed Expansion: Part 1...

    Science.gov (United States)

    2012-08-13

    ... COMMISSION The Information Technology Agreement: Advice and Information on the Proposed Expansion: Part 1; The Information Technology Agreement: Advice and Information on the Proposed Expansion: Part 2 AGENCY... Information Technology Agreement: Advice and Information on the Proposed Expansion: Part 1, and...

  20. Technology-enabled assessment of health professions education: consensus statement and recommendations from the Ottawa 2010 Conference

    DEFF Research Database (Denmark)

    Amin, Zubair; Boulet, John R; Cook, David A

    2011-01-01

    The uptake of information and communication technologies (ICTs) in health professions education can have far-reaching consequences on assessment. The medical education community still needs to develop a deeper understanding of how technology can underpin and extend assessment practices....... This article was developed by the 2010 Ottawa Conference Consensus Group on technology-enabled assessment to guide practitioners and researchers working in this area. This article highlights the changing nature of ICTs in assessment, the importance of aligning technology-enabled assessment with local context...... and needs, the need for better evidence to support use of technologies in health profession education assessment, and a number of challenges, particularly validity threats, that need to be addressed while incorporating technology in assessment. Our recommendations are intended for all practitioners across...

  1. Bringing (Century-Old) Technology into the Classroom. Part I: Teaching Mechanics and Thermodynamics with Antiques

    Science.gov (United States)

    Jewett, John W., Jr.

    2015-01-01

    The notion of bringing technology into the classroom has been the subject of many recent presentations at conferences and papers in physics teaching journals. The use of devices such as laptops, smartphones, tablets, and clickers is rising in today's classrooms and laboratories. PhET simulations have been available online for over a decade. A…

  2. A BIBLIOGRAPHY ON INFORMATION SCIENCE AND TECHNOLOGY FOR 1965. PART 4

    Science.gov (United States)

    This is the final segment of a bibliography of 1965 literature on information science and technology. With the addition in this segment of 407 entries, the total number of references is 2157. The report includes journal articles, conference papers, technical reports, monographs, theses, and some patent disclosures.

  3. Proceedings of the Fifth CANMET/ACI International Conference on Recent Advances in Concrete Technology : volume 1 and supplementary papers

    Energy Technology Data Exchange (ETDEWEB)

    Malhotra, V.M. (ed.) [Natural Resources Canada, Ottawa, ON (Canada). CANMET Energy Technology Centre; Venturino, M. (comp.)

    2001-07-01

    This conference brought together researchers from industry, academia, and government agencies from around the world to discuss the recent advances in concrete technology and to discuss areas that need more research. The presentations focused on all aspects of concrete technology and sustainability with most of them dealing with the issue of supplementing cementing materials with admixtures such as fly ash. In addition to the referenced proceedings, a book of supplementary papers was also published. Cement blends were found to prolong the longevity of concrete. An added benefit is that they avoid the huge cost of repairs and replacement cycles. The use of fly ash in cement is considered to be a viable waste product material for cement mixtures. A total of 64 papers were presented at this conference, of which 13 have been processed separately for inclusion in the database. refs., tabs., figs.

  4. President Hu Jintao's Speech in the National Scientific and Technology Conference

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ Scientific and technology are the first productivity. They are the revolutionary power of accelerating the civilization progress of the human society. In order to realize the goal set in the 5th Plenary Session of the 16th Central Committee of the Communist Part of China, we must adhere to the Deng Xiaoping Theory and the guideline of Three Represents,comprehensively implement the guideline of Scientific Development,adopt the Strategy of Developing the Country wirh Science and Education and the Strategy of Talents Strengthen the Country, further exert the important role of the scientific and technology progress and innovation, so as to lead the economic and social development into the orbit of Human First and comprehensive and sustaining development.

  5. President Hu Jintao's Speech in the National Scientific and Technology Conference

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

      Scientific and technology are the first productivity. They are the revolutionary power of accelerating the civilization progress of the human society. In order to realize the goal set in the 5th Plenary Session of the 16th Central Committee of the Communist Part of China, we must adhere to the Deng Xiaoping Theory and the guideline of Three Represents,comprehensively implement the guideline of Scientific Development,adopt the Strategy of Developing the Country wirh Science and Education and the Strategy of Talents Strengthen the Country, further exert the important role of the scientific and technology progress and innovation, so as to lead the economic and social development into the orbit of Human First and comprehensive and sustaining development.……

  6. Better, and 'healthier' decision making through information technology: conference report from the Health 2.0 conference in San Francisco, September 2011.

    Science.gov (United States)

    Camporesi, S

    2011-01-01

    San Francisco served as the host city for the 5th Annual Health 2.0 conference on 25-27 September 2011, which gathered more than 1,500 people interested and actively involved in innovation in health care through information technology. The author attended this conference and in this paper is presenting key insights, concepts, and news from the cutting edge of Health 2.0: from new tools to redesign medical data; to synergistic interactions between web 2.0 tools and public health; to the use of the internet as a positive catalyst for behavioral change to improve health and lifestyle; to direct to consumer genetic testing that drive a new, community-driven approach to research and to electronic health records adoption and data liberation. The main thread linking all of these initiatives is a participatory approach to health that involves all relevant stakeholders: from patients and their families, to physicians and health professionals, to nurses and caregivers, to insurance and other health providers, working together toward the common aim of a better health care.

  7. Conference Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Riveros, P. A.; Dutrizac, J. E. [Natural Resources Canada, Ottawa, ON (Canada)] [eds.

    2001-07-01

    This workshop is part of a continuing series of joint workshops organized by CANMET of Natural Resources Canada and the Research Directorate-General of the European Commission in the areas of sustainable metallurgical processing, recycling and environmental protection. The program presented at this conference also benefited from the organizational support of the Canadian Association of Recycling Industries. Over the past twenty years these workshops served as a valuable forum for the discussion of the technological issues associated with metallurgical processing, recycling and compliance with environmental regulations within the framework of sustainable development. The program this year was organized in five sessions. A total of 32 papers were presented. Session One emphasized the international dimension of modern research as illustrated by the Intelligent Manufacturing System (MIS) program. Session Two dealt with recycling, with special attention to the recycling of plastics and construction materials. Session Three was devoted to highlighting European efforts to treat chromium-bearing solutions or to find alternatives to chromium salts in surface treatment operations. Session Four emphasized primary and secondary zinc processing and the importance of energy conservation. The final session reviewed waste management practices and the utilization of waste materials. Opening addresses by representatives of the sponsoring organizations and a list of conference attendees and their affiliations are also included.

  8. Guest Editor's introduction: Selected papers from the 4th USENIX Conference on Object-Oriented Technologies and Systems

    Science.gov (United States)

    Sventek, Joe

    1998-12-01

    Hewlett-Packard Laboratories, 1501 Page Mill Road, Palo Alto, CA 94304, USA Introduction The USENIX Conference on Object-Oriented Technologies and Systems (COOTS) is held annually in the late spring. The conference evolved from a set of C++ workshops that were held under the auspices of USENIX, the first of which met in 1989. Given the growing diverse interest in object-oriented technologies, the C++ focus of the workshop eventually became too narrow, with the result that the scope was widened in 1995 to include object-oriented technologies and systems. COOTS is intended to showcase advanced R&D efforts in object-oriented technologies and software systems. The conference emphasizes experimental research and experience gained by using object-oriented techniques and languages to build complex software systems that meet real-world needs. COOTS solicits papers in the following general areas: application of, and experiences with, object-oriented technologies in particular domains (e.g. financial, medical, telecommunication); the architecture and implementation of distributed object systems (e.g. CORBA, DCOM, RMI); object-oriented programming and specification languages; object-oriented design and analysis. The 4th meeting of COOTS was held 27 - 30 April 1998 at the El Dorado Hotel, Santa Fe, New Mexico, USA. Several tutorials were given. The technical program proper consisted of a single track of six sessions, with three paper presentations per session. A keynote address and a provocative panel session rounded out the technical program. The program committee reviewed 56 papers, selecting the best 18 for presentation in the technical sessions. While we solicit papers across the spectrum of applications of object-oriented technologies, this year there was a predominance of distributed, object-oriented papers. The accepted papers reflected this asymmetry, with 15 papers on distributed objects and 3 papers on object-oriented languages. The papers in this special issue are

  9. Girls And Science And Technology (GASAT). Proceedings of the Conference (1st, Eindhoven, The Netherlands, November 9-13, 1981). Volume 1.

    Science.gov (United States)

    Raat, Jan H.; And Others

    An international conference was held: (1) to determine what can be done to make science (particularly physics) and technology more attractive to girls; (2) to examine how girls who study science and technology can have the same opportunities as boys have; and (3) to see that girls have the same results in science and technology as boys have. These…

  10. A Report on University Applications of Satellite/Cable Technology; First Annual International Communications Conference (Madison, Wisconsin, June 3-5, 1975).

    Science.gov (United States)

    Parker, Lorne A., Comp.; Riccomini, Betsy, Comp.

    The aim of the conference on University Applications of Satellite/Cable Technology was to stimulate discussion among universities, industry, and government on the possibilities of satellite and cable technology in the future. Twenty-six presentations were made covering the following topics: the current status of satellite/cable technology; the…

  11. Taking Part in Technology Education: Elements in Students' Motivation

    Science.gov (United States)

    Autio, Ossi; Hietanoro, Jenni; Ruismaki, Heikki

    2011-01-01

    The purpose of this study was to determine the elements motivating comprehensive school students to study technology education. In addition, we tried to discover how students' motivation towards technology education developed over the period leading up to their school experience and the effect this might have on their future involvement with…

  12. Second International Symposium on Magnetic Suspension Technology, part 1

    Science.gov (United States)

    Groom, Nelson J. (Editor); Britcher, Colin P. (Editor)

    1994-01-01

    In order to examine the state of technology of all areas of magnetic suspension and to review related recent developments in sensors and controls approaches, superconducting magnet technology, and design/implementation practices, the Second International Symposium on Magnetic Suspension Technology was held. The symposium included 18 technical sessions in which 44 papers were presented. The technical sessions covered the areas of bearings, bearing modeling, controls, vibration isolation, micromachines, superconductivity, wind tunnel magnetic suspension systems, magnetically levitated trains (MAGLEV), rotating machinery and energy storage, and applications. A list of attendees appears at the end of the document.

  13. Second International Symposium on Magnetic Suspension Technology, part 2

    Science.gov (United States)

    Groom, Nelson J. (Editor); Britcher, Colin P. (Editor)

    1994-01-01

    In order to examine the state of technology of all areas of magnetic suspension and to review related recent developments in sensors and controls approaches, superconducting magnet technology, and design/implementation practices, the 2nd International Symposium on Magnetic Suspension Technology was held at the Westin Hotel in Seattle, WA, on 11-13 Aug. 1993. The symposium included 18 technical sessions in which 44 papers were presented. The technical sessions covered the areas of bearings, bearing modelling, controls, vibration isolation, micromachines, superconductivity, wind tunnel magnetic suspension systems, magnetically levitated trains (MAGLEV), rotating machinery and energy storage, and applications. A list of attendees appears at the end of the document.

  14. Conference information

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    @@ Thermag Ⅳ- The 4th International Conference on Magnetic Refrigeration at Room Temperature of IIR Refrigeration technology is widely used today. However, traditional vapor compression/expansion refrigeration technology has some disadvantages, such as low conversion efficiency of vapor compressor, and emission of the ozonosphere depletion gas and greenhouse effect gas, etc. Magnetic refrigeration is a new cooling technology with huge potential application prospect, characterized by high efficiency, energy saving and environmental friendly.

  15. International Symposium on Magnetic Suspension Technology, Part 2

    Science.gov (United States)

    Groom, Nelson J. (Editor); Britcher, Colin P. (Editor)

    1992-01-01

    In order to examine the state of technology of all areas of magnetic suspension and to review related recent developments in sensors and controls approaches, superconducting magnet technology, and design/implementation practices, a symposium was held. The proceedings are presented. The sessions covered the areas of bearings, sensors and controls, microgravity and vibration isolation, superconductivity, manufacturing applications, wind tunnel magnetic suspension systems, magnetically levitated trains (MAGLEV), space applications, and large gap magnetic suspension systems.

  16. CSP-IEEE Instrumentation and Measurement Technology Conference 2016 (IEEE 12MTC 2016)

    Science.gov (United States)

    2016-08-22

    and Malaysia . Travelling expense and accommodation cost of the conference venue are two major concerns which cause some regular attendees from Brazil...the Conference is in Asia , therefore China , Taiwan , Malaysia , and India were on the list. As for the acceptance rat ion , Austria , Italy, UK...15 69.4% Brazil 14 7 66.7% USA 15 6 71.4% Malaysia 12 10 54 .5% Germany 9 3 75.0% United Kingdom 10 2 83 .3% Canada 8 2 80.0% Austria 10 0

  17. Technology-enabled assessment of health professions education: consensus statement and recommendations from the Ottawa 2010 Conference

    DEFF Research Database (Denmark)

    Amin, Zubair; Boulet, John R; Cook, David A;

    2011-01-01

    The uptake of information and communication technologies (ICTs) in health professions education can have far-reaching consequences on assessment. The medical education community still needs to develop a deeper understanding of how technology can underpin and extend assessment practices. This arti......The uptake of information and communication technologies (ICTs) in health professions education can have far-reaching consequences on assessment. The medical education community still needs to develop a deeper understanding of how technology can underpin and extend assessment practices....... This article was developed by the 2010 Ottawa Conference Consensus Group on technology-enabled assessment to guide practitioners and researchers working in this area. This article highlights the changing nature of ICTs in assessment, the importance of aligning technology-enabled assessment with local context...... health professional education. Recommendations include adhering to principles of good assessment, the need for developing coherent institutional policy, using technologies to broaden the competencies to be assessed, linking patient-outcome data to assessment of practitioner performance, and capitalizing...

  18. The Mixed Waste Management Facility: Technology selection and implementation plan, Part 2, Support processes

    Energy Technology Data Exchange (ETDEWEB)

    Streit, R.D.; Couture, S.A.

    1995-03-01

    The purpose of this document is to establish the foundation for the selection and implementation of technologies to be demonstrated in the Mixed Waste Management Facility, and to select the technologies for initial pilot-scale demonstration. Criteria are defined for judging demonstration technologies, and the framework for future technology selection is established. On the basis of these criteria, an initial suite of technologies was chosen, and the demonstration implementation scheme was developed. Part 1, previously released, addresses the selection of the primary processes. Part II addresses process support systems that are considered ``demonstration technologies.`` Other support technologies, e.g., facility off-gas, receiving and shipping, and water treatment, while part of the integrated demonstration, use best available commercial equipment and are not selected against the demonstration technology criteria.

  19. 10. international conference on innovation and technological development; 10. congreso internacional sobre innovacion y desarrollo tecnologico (CIINDET 2013)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-03-15

    The conference held in the city of Cuernavaca, Morelos, Mexico, from March 13 to 15, 2013 presented several papers related to the areas of mechanical engineering, electrical engineering, control systems, computer systems, electronics and instrumentation and alternate energies, with a focus on innovation and technology development [Spanish] En este congreso celebrado en la ciudad de Cuernavaca, Morelos, Mexico, del 13 al 15 de marzo de 2013, se presentan diversas ponencias relacionadas con las areas de ingenieria mecanica, ingenieria electrica, sistemas de control, sistemas computacionales, electronica e instrumentacion y energias alternas, con un enfoque hacia la innovacion y el desarrollo tecnologico.

  20. 8. international conference on innovation and technological development; 8. congreso internacional sobre innovacion y desarrollo tecnologico (CIINDET 2010)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-11-15

    In this conference in the city of Cuernavaca, Morelos, Mexico, from 24 to 26 November 2010, there are several papers related to the areas of mechanical engineering, electrical engineering, control systems, computer systems, electronics and instrumentation and energies alternating with a focus on innovation and technological development. [Spanish] En este congreso celebrado en la ciudad de Cuernavaca, Morelos, Mexico, del 24 al 26 de noviembre de 2010, se presentan diversas ponencias relacionadas con las areas de ingenieria mecanica, ingenieria electrica, sistemas de control, sistemas computacionales, electronica e instrumentacion y energias alternas con un enfoque hacia la innovacion y el desarrollo tecnologico.

  1. IFLA General Conference, 1986. Management and Technology Division. Section: Statistics. Papers.

    Science.gov (United States)

    International Federation of Library Associations and Institutions, The Hague (Netherlands).

    Papers on statistics which were presented at the 1986 International Federation of Library Associations (IFLA) conference include: (1) "Library Data Collection in Brazil (Nice Menezes de Figueiredo, Brazil); (2) "Fact-Finding on Statistics and Reference Tools in Japan" (Yuriko Sugimoto, Chihomi Oka, Ikuko Mayumi, and Keiko Kurata,…

  2. Potato production and innovative technologies. Proceedings Potato Russia International Conference, Moscou Agust 21-22, 2007

    NARCIS (Netherlands)

    Haverkort, A.J.; Anisimov, B.V.

    2007-01-01

    This comprehensive book is the result of the Potato Russia international conference that took place in August 2007 in Moscow. It begins with a series of papers that give an excellent overview of consumer behaviour and marketing with examples from various countries in the world. The quality of proces

  3. The new technology for manufacturing polymer Nanopowder. Part 2

    Directory of Open Access Journals (Sweden)

    GRYAZNOV Igor Vasilevich

    2016-01-01

    Full Text Available The authors studied the problem of pollution by waste polymers. The research is dedicated to the methods of recycling of polymers, in particular PTFE. It was shown that the most environmentally friendly disposal methods with the lowest cost are the methods based on stepwise mechanical dispersion. Technologies and devices based on the principles of abrasive vortex dispersion polymers have been developed and tested. To protect the intellectual property of the author the staff of LLC TARK (Ukraine and the Science and Technology Center Polymate (Israel registered patent «Method and apparatus for manufacturing submicron polymer powder» USA No. 12 / 981.202 of 29.12.2010.

  4. The new technology for manufacturing polymer Nanopowder. Part 1

    Directory of Open Access Journals (Sweden)

    GRYAZNOV Igor Vasilevich

    2015-10-01

    Full Text Available The authors studied the problem of pollution by waste polymers. The research is dedicated to the methods of recycling of polymers, in particular PTFE. It was shown that the most environmentally friendly disposal methods with the lowest cost are the methods based on stepwise mechanical dispersion. Technologies and devices based on the principles of abrasive vortex dispersion polymers have been developed and tested. To protect the intellectual property of the author the staff of LLC TARK (Ukraine and the Science and Technology Center Polymate (Israel registered patent «Method and apparatus for manufacturing submicron polymer powder» USA No. 12 / 981.202 of 29.12.2010.

  5. International Symposium on Magnetic Suspension Technology, Part 1

    Science.gov (United States)

    Groom, Nelson J. (Editor); Britcher, Colin P. (Editor)

    1992-01-01

    The goal of the symposium was to examine the state of technology of all areas of magnetic suspension and to review related recent developments in sensors and controls approaches, superconducting magnet technology, and design/implementation practices. The symposium included 17 technical sessions in which 55 papers were presented. The technical session covered the areas of bearings, sensors and controls, microgravity and vibration isolation, superconductivity, manufacturing applications, wind tunnel magnetic suspension systems, magnetically levitated trains (MAGLEV), space applications, and large gap magnetic suspension systems.

  6. Mathematics on the Move: Using Mobile Technologies to Support Student Learning (Part 2)

    Science.gov (United States)

    Attard, Catherine; Northcote, Maria

    2012-01-01

    Continuing the series of articles on teaching mathematics with technology, this article furthers the authors' exploration of the use of a range of mobile technologies to enhance teachers' practices in the primary mathematics classroom. In Part 1 of this article, the authors explored the use of the iPod Touch and iPad. In Part 2, they explore…

  7. Proceedings of the 2. MIT international conference on the next generation of nuclear power technology. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-12-31

    The goal of the conference was to try to attract a variety of points of view from well-informed people to debate issues concerning nuclear power. Hopefully from that process a better understanding of what one should be doing will emerge. In organizing the conference lessons learned from the previous one were applied. A continuous effort was made to see to it that the arguments for the alternatives to nuclear power were given abundant time for presentation. This is ultimately because nuclear power is going to have to compete with all of the energy technologies. Thus, in discussing energy strategy all of the alternatives must be considered in a reasonable fashion. The structure the conference used has seven sessions. The first six led up to the final session which was concerned with what the future nuclear power strategy should be. Each session focused upon a question concerning the future. None of these questions has a unique correct answer. Rather, topics are addressed where reasonable people can disagree. In order to state some of the important arguments for each session`s question, the combination of a keynote paper followed by a respondent was used. The respondent`s paper is not necessarily included to be a rebuttal to the keynote; but rather, it was recognized that two people will look at a complex question with different shadings. Through those two papers the intention was to get out the most important arguments affecting the question for the session. The purpose of the papers was to set the stage for about an hour of discussion. The real product of this conference was that discussion.

  8. Student Support for EIPBN 2010 Conference

    Energy Technology Data Exchange (ETDEWEB)

    Reginald C. Farrow

    2011-03-11

    The 54th International Conference on Electron, Ion and Photon Beam Technology and Nanofabrication, 2010, held at the Egan Convention Center and Hilton in Anchorage, Alaska, June 1 to 4, 2010 was a great success in large part because financial support allowed robust participation from students. The conference brought together 444 engineers and scientists from industries and universities from all over the world to discuss recent progress and future trends. Among the emerging technologies that are within the scope of EIPBN is Nanofabrication for Energy Sources along with nanofabrication for the realization of low power integrated circuits. Every year, EIPBN provides financial support for students to attend the conference.The students gave oral and poster presentations of their research and many published peer reviewed articles in a special conference issue of the Journal of Vacuum Science and Technology B. The Department of Energy Office of Basic Energy Sciences supported 20 students from US universities with a $15,000.

  9. Technology for the Nineties. RESNA '91: Proceedings of the Annual Conference (14th, Kansas City, Missouri, June 21-26, 1991).

    Science.gov (United States)

    Presperin, Jessica J., Ed.

    This proceedings document contains approximately 150 papers and 50 poster sessions presented at a conference on the advancement of rehabilitation and assistive technology. Individual sessions focused on the following topics: gerontology, robotics, technology transfer, sensory aids, computer applications, information dissemination, service delivery…

  10. Preparing Your School Building for Technology. Proceedings of the Council of Education Facility Planners International (CEFPI) Conference (Vancouver, British Columbia, Canada, October 4-7, 1998).

    Science.gov (United States)

    Council of Educational Facility Planners, International, Scottsdale, AZ.

    Participants in the 1998 annual technology conference of the Council of Educational Facility Planners, International discussed adapting today's school buildings to meet the new educational technology. This document presents the presentation materials (mostly copies of slides or transparencies, with little or no accompanying text) delivered by…

  11. PROGRESS AND PROSPECT, A SUMMARY OF THE PROCEEDINGS OF THE SECOND ANNUAL CONFERENCE OF THE COUNCIL ON LIBRARY TECHNOLOGY (TOLEDO, MAY 23-25, 1968).

    Science.gov (United States)

    HECKART, RHUA, ED.

    INCLUDED IN THESE PROCEEDINGS ARE SUMMARIES OF THE SPEECHES, PANELS, AND GROUP DISCUSSIONS PRESENTED AT THE CONFERENCE HOSTED BY THE UNIVERSITY OF TOLEDO COMMUNITY AND TECHNICAL COLLEGE. THE TOPICS COVERED INCLUDE--(1) HISTORY AND BACKGROUND ON THE DEVELOPMENT OF THE COUNCIL ON LIBRARY TECHNOLOGY, (2) THE TECHNOLOGICAL GAP IN TODAY'S SOCIETY, (3)…

  12. Instructional Technology: Issues and Concerns. Summary Report of the Lake Okoboji Educational Media Leadership Conference (20th Lakeside Laboratory, Lake Okoboji, Milford, Iowa, August 11-16, 1974).

    Science.gov (United States)

    Cochran, Lida M.; And Others

    Participants of the twentieth Lake Okoboji Educational Media Leadership Conference examined various issues in the field of instructional technology, and suggested new directions. This report presents descriptions of general meetings and group studies. Ten subtopics were discussed: (1) humanizing education via instructional technology, (2)…

  13. 15 CFR Supplement No. 2 to Part 774 - General Technology and Software Notes

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false General Technology and Software Notes... REGULATIONS THE COMMERCE CONTROL LIST Pt. 774, Supp. 2 Supplement No. 2 to Part 774—General Technology and Software Notes 1. General Technology Note. The export of “technology” that is “required” for the...

  14. Oak Ridge National Laboratory Technology Logic Diagram. Volume 3, Technology evaluation data sheets: Part B, Dismantlement, Remedial action

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1, Technology Evaluation; Vol. 2, Technology Logic Diagram and Vol. 3, Technology EvaLuation Data Sheets. Part A of Vols. 1 and 2 focuses on RA. Part B of Vols. 1 and 2 focuses on the D&D of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TM, an explanation of the problems facing the volume-specific program, a review of identified technologies, and rankings of technologies applicable to the site. Volume 2 (Pts. A. B. and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A. B, and C) contains the TLD data sheets. This volume provides the technology evaluation data sheets (TEDS) for ER/WM activities (D&D, RA and WM) that are referenced by a TEDS code number in Vol. 2 of the TLD. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than is given for the technologies in Vol. 2.

  15. Oak Ridge National Laboratory Technology Logic Diagram. Volume 3, Technology evaluation data sheets: Part C, Robotics/automation, Waste management

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1, Technology Evaluation; Vol. 2, Technology Logic Diagram and Vol. 3, Technology EvaLuation Data Sheets. Part A of Vols. 1 and 2 focuses on RA. Part B of Vols. 1 and 2 focuses on the D&D of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TM, an explanation of the problems facing the volume-specific program, a review of identified technologies, and rankings of technologies applicable to the site. Volume 2 (Pts. A. B. and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A. B, and C) contains the TLD data sheets. This volume provides the technology evaluation data sheets (TEDS) for ER/WM activities (D&D, RA and WM) that are referenced by a TEDS code number in Vol. 2 of the TLD. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than is given for the technologies in Vol. 2.

  16. Electrosurgery: part II. Technology, applications, and safety of electrosurgical devices.

    Science.gov (United States)

    Taheri, Arash; Mansoori, Parisa; Sandoval, Laura F; Feldman, Steven R; Pearce, Daniel; Williford, Phillip M

    2014-04-01

    Electrosurgical currents can be delivered to tissue in monopolar or bipolar and monoterminal or biterminal modes, with the primary difference between these modes being their safety profiles. A monopolar electrosurgical circuit includes an active electrode and a dispersive (return) electrode, while there are 2 active electrodes in bipolar mode. In monoterminal mode, there is an active electrode, but there is no dispersive electrode connected to the patient's body and instead the earth acts as the return electrode. Biterminal mode uses a dispersive electrode connected to the patient's body, has a higher maximum power, and can be safer than monoterminal mode in certain situations. Electrosurgical units have different technologies for controlling the output power and for providing safety. A thorough understanding of these technologies helps with a better selection of the appropriate surgical generator and modes.

  17. Practice improvement, part II: update on patient communication technologies.

    Science.gov (United States)

    Roett, Michelle A; Coleman, Mary Thoesen

    2013-11-01

    Patient portals (ie, secure web-based services for patient health record access) and secure messaging to health care professionals are gaining popularity slowly. Advantages of web portals include timely communication and instruction, access to appointments and other services, and high patient satisfaction. Limitations include inappropriate use, security considerations, organizational costs, and exclusion of patients who are uncomfortable with or unable to use computers. Attention to the organization's strategic plan and office policies, patient and staff expectations, workflow and communication integration, training, marketing, and enrollment can facilitate optimal use of this technology. Other communication technologies that can enhance patient care include automated voice or text reminders and brief electronic communications. Social media provide another method of patient outreach, but privacy and access are concerns. Incorporating telehealthcare (health care provided via telephone or Internet), providing health coaching, and using interactive health communication applications can improve patient knowledge and clinical outcomes and provide social support.

  18. Part 2 -- current program integrating strategies and lubrication technology

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, B.

    1996-12-01

    This paper is the second of two that describe the Predictive Maintenance Program for rotating machinery at the Palo Verde Nuclear Generating Station. The Predictive Maintenance program has been enhanced through organizational changes and improved interdisciplinary usage of technology. This paper will discuss current program strategies that have improved the interaction between the Vibration and Lube Oil programs. The {open_quotes}Lube Oil{close_quotes} view of the combined program along with case studies will then be presented.

  19. The new technology for manufacturing polymer Nanopowder. Part 2

    OpenAIRE

    GRYAZNOV Igor Vasilevich; FIGOVSKY Oleg Lvovich

    2016-01-01

    The authors studied the problem of pollution by waste polymers. The research is dedicated to the methods of recycling of polymers, in particular PTFE. It was shown that the most environmentally friendly disposal methods with the lowest cost are the methods based on stepwise mechanical dispersion. Technologies and devices based on the principles of abrasive vortex dispersion polymers have been developed and tested. To protect the intellectual property of the author the staff of LLC TARK (Ukrai...

  20. The new technology for manufacturing polymer Nanopowder. Part 1

    OpenAIRE

    GRYAZNOV Igor Vasilevich; FIGOVSKY Oleg Lvovich

    2015-01-01

    The authors studied the problem of pollution by waste polymers. The research is dedicated to the methods of recycling of polymers, in particular PTFE. It was shown that the most environmentally friendly disposal methods with the lowest cost are the methods based on stepwise mechanical dispersion. Technologies and devices based on the principles of abrasive vortex dispersion polymers have been developed and tested. To protect the intellectual property of the author the staff of LLC TARK (Ukrai...

  1. Technological Support of Critical Parts for Railway Transport Working Properties

    Science.gov (United States)

    Gabets, A. V.; Gabets, D. A.; Markov, A. M.; Radchenko, M. V.; Leonov, S. L.

    2017-01-01

    The materials of complex research of operational properties of a new brand cast iron CHMN-35M. Optimal chemical composition was determined. The obtained results allow to conclude about possibility of its use for the manufacture of critical parts of rolling stock of railway transport, in particular of a side bearing cap

  2. PREFACE: International Conference on Advancement in Science and Technology 2012 (iCAST): Contemporary Mathematics, Mathematical Physics and their Applications

    Science.gov (United States)

    Ganikhodjaev, Nasir; Mukhamedov, Farrukh; Hee, Pah Chin

    2013-04-01

    The 4th International Conference on the Advancement of Science and Technology 2012 (iCAST 2012), with theme 'Contemporary Mathematics, Mathematical Physics and their Applications', took place in Kuantan, Malaysia, from Wednesday 7 to Friday 9 November 2012. The conference was attended by more than 100 participants, and hosted about 160 oral and poster papers by more than 140 pre-registered authors. The key topics of the 4th iCAST 2012 include Pure Mathematics, Applied Mathematics, Theoretical/Mathematical Physics, Dynamical Systems, Statistics and Financial Mathematics. The scientific program was rather full since after the Keynote and Invited Talks in the morning, four parallel sessions ran every day. However, according to all attendees, the program was excellent with a high level of talks and the scientific environment was fruitful; thus all attendees had a creative time. The conference aimed to promote the knowledge and development of high-quality research in mathematical fields concerned with the application of other scientific fields as well as modern technological trends in physics, chemistry, biology, medicine, economics, sociology and environmental sciences. We would like to thank the Keynote and the Invited Speakers for their significant contributions to 4th iCAST 2012. We would also like to thank the members of the International Scientific Committee and the members of the Organizing Committee. We cannot end without expressing our many thanks to International Islamic University Malaysia and our sponsors for their financial support . This volume presents selected papers which have been peer-reviewed. The editors hope that it may be useful and fruitful for scholars, researchers, and advanced technical members of the industrial laboratory facilities for developing new tools and products. Guest Editors Nasir Ganikhodjaev, Farrukh Mukhamedov and Pah Chin Hee The PDF contains the committee lists, board list and biographies of the plenary speakers.

  3. Editorial: Shifting from Technology-Enhanced Learning to Technology-Transformed Learning - Best Papers Selected from the Conference APTEL 2010

    Directory of Open Access Journals (Sweden)

    Nian-Shing Chen

    2011-09-01

    Full Text Available In the past decade, the rapid development of computer and communication technologies brings many opportunities for developing innovative learning environments with rich resources. Technology enhanced learning shifted their focus from technology to support factual learning, memorization and the reinforcement of basic skills to stimulate students to engage in meaningful learning and situated learning. With the support of computer and communication technologies, students are able to develop higher-order skills, such as critical thinking and problem-solving skills individually or collaboratively. Technology enhanced learning has become an interdisciplinary issue that attracts researchers from various fields to work together.

  4. 37th International MATADOR Conference

    CERN Document Server

    Li, Lin

    2013-01-01

    Presented here are 97 refereed papers given at the 37th MATADOR Conference held at The University of Manchester in July 2012. The MATADOR series of conferences covers the topics of Manufacturing Automation and Systems Technology, Applications, Design, Organisation and Management, and Research.   The proceedings of this conference contain original papers contributed by researchers from many countries on different continents. The papers cover the principles, techniques and applications in aerospace, automotive, biomedical, energy, consumable goods and process industries.    The papers in this volume reflect: the importance of manufacturing to international wealth creation; the emerging fields of micro- and nano-manufacture; the increasing trend towards the fabrication of parts using lasers; the growing demand for precision engineering and part inspection techniques, and the changing trends in manufacturing within a global environment. .

  5. Aerospace power systems technology; Proceedings of the Aerospace Technology Conference and Exposition, Anaheim, CA, Oct. 3-6, 1988

    Energy Technology Data Exchange (ETDEWEB)

    1988-01-01

    The present conference on aircraft auxilliary power systems discusses aircraft thermal management, highly reliable DC power sources for avionic subsystems, a cascaded doubly-fed variable-speed/constant-frequency generator, the evolution of battery systems employed by USAF aircraft, electrical power system architectures for future aerospace vehicles, and high-reliability aircraft generators. Also discussed are the benefits of digital control and management system integration in secondary power systems, pneumatic link secondary power systems for military aircraft, the combination of emergency power with an APU, X-29A subsystems integration, and the T-100 multipurpose small power unit.

  6. Y-12 Plant remedial action Technology Logic Diagram: Volume 3, Technology evaluation data sheets: Part A, Remedial action

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    The Y-12 Plant Remedial Action Technology Logic Diagram (TLD) was developed to provide a decision-support tool that relates environmental restoration (ER) problems at the Y-12 Plant to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed for sufficient development of these technologies to allow for technology transfer and application to remedial action (RA) activities. The TLD consists of three volumes. Volume 1 contains an overview of the TLD, an explanation of the program-specific responsibilities, a review of identified technologies, and the rankings of remedial technologies. Volume 2 contains the logic linkages among environmental management goals, environmental problems and the various technologies that have the potential to solve these problems. Volume 3 contains the TLD data sheets. This report is Part A of Volume 3 and contains the Remedial Action section.

  7. Y-12 Plant remedial action Technology Logic Diagram: Volume 3, Technology evaluation data sheets: Part B, Characterization; robotics/automation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    The Y-12 Plant Remedial Action Technology Logic Diagram (TLD) was developed to provide a decision-support tool that relates environmental restoration (ER) problems at the Y-12 Plant to potential technologies that can remediate theses problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed for sufficient development of these technologies to allow for technology transfer and application to remedial action (RA) activities. The TLD consists of three volumes. Volume 1 contains an overview of the TLD, an explanation of the program-specific responsibilities, a review of identified technologies, and the rankings of remedial technologies. Volume 2 contains the logic linkages among environmental management goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 contains the TLD data sheets. This report is Part B of Volume 3 and contains the Characterization and Robotics/Automation sections.

  8. An integrated model for part-operation allocation and investments in CNC technology

    NARCIS (Netherlands)

    Bokhorst, J.A.C.; Slomp, J.; Suresh, N.

    2002-01-01

    This study addresses the issue of investment appraisal of new technology, specifically computer numerical control (CNC) machine tools in conjunction with optimal allocation of parts and operations on CNC machines as the investments take place. Part-operation allocation is the allocation of parts and

  9. An integrated model for part-operation allocation and investments in CNC technology

    NARCIS (Netherlands)

    Bokhorst, J.A.C.; Slomp, J.; Suresh, N.

    2002-01-01

    This study addresses the issue of investment appraisal of new technology, specifically computer numerical control (CNC) machine tools in conjunction with optimal allocation of parts and operations on CNC machines as the investments take place. Part-operation allocation is the allocation of parts and

  10. Proceedings of the Conference on Industry Partnerships to Deploy Environmental Technology

    Energy Technology Data Exchange (ETDEWEB)

    None

    1996-01-01

    Three goals were accomplished at the meeting: review of the latest environmental and waste-management technologies being developed under FETC sponsorship; addressing the accomplishments in, and barriers affecting, private-sector development of these technologies; and laying the groundwork for future technology development initiatives and opportunities.

  11. Visible Parts, Invisible Whole: Swedish Technology Student Teachers' Conceptions about Technological Systems

    Science.gov (United States)

    Hallström, Jonas; Klasander, Claes

    2017-01-01

    Technological systems are included as a component of national technology curricula and standards for primary and secondary education as well as corresponding teacher education around the world. Little is known, however, of how pupils, students, and teachers conceive of technological systems. In this article we report on a study investigating…

  12. Citrus fruits. Part II. Chemistry, technology, and quality evaluation. B. Technology.

    Science.gov (United States)

    Ranganna, S; Govindarajan, V S; Ramana, K V

    1983-01-01

    In Part II of this review on citrus fruits, the literature on chemistry, technology, and quality evaluation are critically considered. Sweet oranges, mandarin, grapefruit, lemon, and lime are generally used for processing. The literature on chemical components of citrus fruit which include sugars, polysaccharides, organic acids, nitrogenous constituents and lipids; carotenoids which contribute to color; vitamins and minerals and flavonoids; limonoids, some of which impart bitterness to the juice; and the volatile components which contribute to aroma were reviewed in section A. Chilled and pasteurized juices, juice concentrates, and beverages are the important products manufactured commercially, and to a limited extent powdered citrus juices, canned segments, and marmalades. The literature on the manufacture of these products also as new types of juice and oil extractors; TASTE and other types of evaporators; tank farms to store juice and concentrate in bulk; aseptic filling in bulk containers and retail packs; alternate flexible and rigid containers other than glass and tin; and recovery of volatile flavoring constituents during juice processing are some of the important technological developments in the recent past and have been discussed in this section. Bitterness in citrus juices and its control, composition of cloud, and its stability and changes during storage have been reviewed. Essential oils, pectin, frozen and dried juice sacs, dried pulp and molasses, flavonoids, seed oil, and meal are the important byproducts, the manufacture of which is given in essential details. Generally, consumers judge the product on the basis of its sensory attributes. The quality of finished product is dependent upon the raw materials used and control of processes. In section C, the U.S. Department of Agriculture (USDA) standards for different products, physicochemical and microbiological parameters prescribed as indices of quality of fruit, juice, concentrate, and other

  13. The NASA Electronic Parts and Packaging (NEPP) Program: Insertion of New Electronics Technologies

    Science.gov (United States)

    LaBel, Kenneth A.; Sampson, Michael J.

    2007-01-01

    This viewgraph presentation gives an overview of NASA Electronic Parts and Packaging (NEPP) Program's new electronics technology trends. The topics include: 1) The Changing World of Radiation Testing of Memories; 2) Even Application-Specific Tests are Costly!; 3) Hypothetical New Technology Part Qualification Cost; 4) Where we are; 5) Approaching FPGAs as a More Than a "Part" for Reliability; 6) FPGAs Beget Novel Radiation Test Setups; 7) Understanding the Complex Radiation Data; 8) Tracking Packaging Complexity and Reliability for FPGAs; 9) Devices Supporting the FPGA Need to be Considered; 10) Summary of the New Electronic Technologies and Insertion into Flight Programs Workshop; and 11) Highlights of Panel Notes and Comments

  14. 1986 CACTS International Conference on Air Cushion Technology, Toronto, Canada, Sept. 16-18, 1986, Preprints

    Science.gov (United States)

    MacEwen, W. R.

    The present conference on the design and development, innovative configurational concepts, test result analyses and operational characteristics of ACVs gives attention to design criteria for light, high-speed ACVs in desert environments, preliminary over-water tests of linear propellers, tests on high speed hovercraft icebreaking, and the performance of an air cushion crawler all-terrain vehicle. Also discussed are the use of ACVs as high speed ASW vehicles, performance criteria for air cushion heave dynamics, the bounce characteristics of an ACV's responsive skirt, and the use of hovercraft in ice enforcement.

  15. 1986 CACTS International Conference on Air Cushion Technology, Toronto, Canada, Sept. 16-18, 1986, Preprints

    Energy Technology Data Exchange (ETDEWEB)

    Macewen, W.R.

    1986-01-01

    The present conference on the design and development, innovative configurational concepts, test result analyses and operational characteristics of ACVs gives attention to design criteria for light, high-speed ACVs in desert environments, preliminary over-water tests of linear propellers, tests on high speed hovercraft icebreaking, and the performance of an air cushion crawler all-terrain vehicle. Also discussed are the use of ACVs as high speed ASW vehicles, performance criteria for air cushion heave dynamics, the bounce characteristics of an ACV's responsive skirt, and the use of hovercraft in ice enforcement.

  16. Ginger--chemistry, technology, and quality evaluation: part 1.

    Science.gov (United States)

    Govindarajan, V S

    1982-01-01

    Ginger is used in more ways than any other spice. This monograph, published in two parts, comprehensively reviews production, trade, processing, chemistry, and evaluation of quality. Botany, world varieties, agronomy, crop improvement and potential are reviewed briefly with emphasis on the yield of functional components. Processing for the market, international trade patterns, and factors influencing them are discussed. Derived products such as ginger powder, syruped ginger, volatile oil, and oleoresin are discussed in greater detail. The increasing world demand for quality products of added value such as the oleoresin and volatile oil show prospects for their production in the growing countries. The chemistry of the components which contribute aroma and pungency that characterize ginger is critically reviewed. The second part deals with evaluation of quality. The physico-chemical parameters prescribed as a measure of quality for ginger and its products in the existing standards can assure only hygienic quality and purity, and possibly the source, when new parameters such as GC-fingerprints are included. The importance of sensorily evaluating flavor quality is emphasized to understand the variation in flavor quality required by the industrial and retail markets. Related areas, such as problems in sensory evaluation of intense flavored substances, objective flavor profile analysis, and correlation of instrumental and sensory data, are discussed and our recent work in this area is summarized. Areas where more research are needed are indicated. Other areas briefly discussed are functional, physiological, and toxicological properties in use of ginger; biosynthetic aspects of the components stimulating flavor; and structure and pungency and chemistry of spices from allied species and genera. A comprehensive bibliography is provided to aid in further study and research.

  17. Ginger-chemistry, technology, and quality evaluation: part 2.

    Science.gov (United States)

    Govindarajan, V S

    1982-01-01

    Ginger is used in more ways than any other spice. This monograph, published in two parts, comprehensively reviews production, trade, processing, chemistry, and evaluation of quality. Botany, world varieties, agronomy, crop improvement, and potential are reviewed briefly with emphasis on the yield of functional components. Processing for the market, international trade patterns and factors influencing them are discussed. Derived products such as ginger powder, syruped ginger, volatile oil, and oleoresin are discussed in greater detail. The increasing world demand for quality products of added value such as the oleoresin and volatile oil show the prospects for their production in the growing countries. The chemistry of the components which contribute aroma and pungency that characterize ginger is critically reviewed. The second part deals with evaluation of quality. The physicochemical parameters prescribed as a measure of quality for ginger and its products in the existing standards, can assure only hygienic quality and purity, and possibly the source, when new parameters such as GC-finger prints are included. The importance of sensorily evaluating flavor quality is emphasized to understand the variation in flavor quality required by the industrial and retail markets. Related areas, such as problems in sensory evaluation of intense flavored substances, objective flavor profile analysis, correlation of instrumental and sensory data are discussed, and our recent work in this area is summarized. Areas where more research is needed are indicated. Other areas briefly discussed are functional, physiological, and toxicological properties in use of ginger; biosynthetic aspects of components stimulating flavor; structure and pungency and chemistry of spices from allied species and genera. A comprehensive bibliography is provided to aid in further study and research.

  18. Joining technology for parts for plastic and thin sheet metal parts; Fuegetechniken fuer Bauteile aus Kunststoff und duennwandigem Metall

    Energy Technology Data Exchange (ETDEWEB)

    Ahlers-Hestermann, G. [BOELLHOFF, Bielefeld (Germany)

    2001-07-01

    With the ongoing application of new materials (Al, Mg, Plastic) as an alternative to steel in light-weight body in white construction it is necessary to develop and use other joining and fixing technologies than spot welding, bolt-and nut-welding. These new technologies for example are mechanical joining technology as clinching and self-pierce-riveting, blind-riveting and special elements to fix other parts as blind-rivets and self-piercing nuts and bolts. These products are mainly used for metal materials and mixed structures. To fix other parts to plastic-parts direct-screwing or the after-moulding-technology with metal or plastic inserts is used. (orig.) [German] Mit der verstaerkten Anwendung von weiteren Werkstoffen (Al, Mg, Kunststoffe) als Stahl im Automobilbau ist die Notwendigkeit erwachsen, alternative Fuege- und Befestigungstechniken zum Punktschweissen, Bolzen- und Mutternschweissen zu entwickeln. Hierzu gehoeren die mechanischen Fuegetechniken wie Stanznieten, Clinchen, Blindnieten sowie die sogenannten Funktionselemente zum Befestigen von Anbauteilen, wie Blind- und Stanznietmuttern und -bolzen. Diese Verfahren werden ueberwiegend fuer metallische Werkstoffe oder bei Mischbauweise angewandt. Fuer die Befestigung an Kunststoffbauteilen wird die Direktverschraubung oder die after-moulding-technik (AMTEC {sup registered}) verwendet. (orig.)

  19. Advanced power assessment for Czech lignite, Task 3.6, Part 2. The 2nd international conference on energy and environment: Transitions in East Central Europe

    Energy Technology Data Exchange (ETDEWEB)

    Sondreal, E.A.; Mann, M.D.; Weber, G.W.; Young, B.C.

    1995-12-01

    On November 1-5, 1994, the Energy & Environmental Research Center (EERC) and Power Research Institute of Prague cosponsored their second conference since 1991 in the Czech Republic, entitled ``Energy and Environment: Transitions in East Central Europe.`` This conference was a continuation of the EERC`s joint commitment, initiated in 1190, to facilitate solutions to short- and long-term energy and environmental problems in East Central Europe. Production of energy from coal in an environmentally acceptable manner is a critical issue facing East Central Europe, because the region continues to rely on coal as its primary energy source. The goal of the conference was to develop partnerships between industry, government, and the research community in East Central Europe and the United States to solve energy and environmental issues in a manner that fosters economic development. Among the topics addressed at the conference were: conventional and advanced energy generation systems; economic operation of energy systems; air pollution controls; power system retrofitting and repowering, financing options; regulatory issues; energy resource options; waste utilization and disposal; and long-range environmental issues. Selected papers in the proceedings have been processed separately for inclusion in the Energy Science and Technology database.

  20. Technology Integration into Teacher Preparation:Part 2—Theory into Practice

    Directory of Open Access Journals (Sweden)

    Mesut DURAN

    2010-12-01

    Full Text Available In Part 1 of a two-part article series, the authors reported on the shortcomings of existing teacher preparation practice concerning technology and teacher education and described the theoretical grounding behind one model for integrating technology intoteacher preparation (Duran & Fossum, 2010. Part 2 here reports on a research project that applied the model at a major university in the U.S. Over a three-year period involving seven cohort groups, 246 educators participated in the study, which combined both quantitative and qualitative data collection and analysis. Findings indicate that over the course of the program, project participants significantly improved their confidence and competence in technology literacy as well as integration of information technology intothe teaching and learning process. The study demonstrates that an approach to professional development that encourages networking, mutual learning, and sharing of strategies and resources among K-16 educators can be effective in improving technology integration in teacher preparation.

  1. [Hi-tech trends in future dentistry--part A: computerized technologies].

    Science.gov (United States)

    Feuerstein, O; Houri-Haddad, Y; Lipovetsky, M; Perez-Davidi, M; Weiss, E I

    2006-07-01

    Growing knowledge and information in the field of dentistry has had a great impact on dental education, management and practice. A prominent change is the digital revolution, which presents new computed technologies and accessible means of communication for sharing written and visual information. Biotechnology, yet another innovated field, will change dentistry even further. This article presents dental innovations forwarded by Israeli Hi-Tech companies. An overview of some advances in technology in the field of dentistry is presented. Part of the described technologies is in R&D phase, part is under preliminary clinical evaluation, and a few have undergone short-term clinical studies. Part A of the article discusses the application of computerized imaging systems to educational purposes, diagnostics and treatment; part B presents other diagnostic and therapeutic technologies.

  2. 12th Annual Science and Engineering Technology Conference/DoD TECH Exposition

    Science.gov (United States)

    2011-06-23

    SPAWAR CDR Will Hesse , USN (Ret) Scott Health & Safety Dr. Ed Hibsman SPAWAR Mr. Larry Hill CAS, Inc. Mrs. Cheryl Holbrook U.S. Army Space and Missile... Herman Rediess Science & Technology Directorate, DHS CAPT Brett Reissener, USN (Ret) Concurrent Technologies Corporation Ms. Denise Rhea-McKenzie Mission

  3. Command and Control Related Computer Technology. Part I. Packet Radio. Part II. Speech Compression and Evaluation

    Science.gov (United States)

    1975-12-01

    Radio group has now assimilated the history and context of the project and has become an active and important member of the group. Resolution of...vii ^ i N - i .-.■ Si • ■ - %■ ’■:■ .". <- * ■ ’ . ■ ■ - v. .■’. parts, one for consonants and one for vowels . It is a nonsense...position, and the response set for each item is a minimal pair of English monosyllables. The Phoneme-Specific Intelligibi1ity test covers vowels

  4. Impact for the 80's: Proceedings of a Conference on Selected Technology for Business and Industry

    Science.gov (United States)

    1980-01-01

    Various aspects of advanced energy technology are discussed. Specific emphasis is given to: aircraft propulsion; wind power commercialization; materials and structures, lubrication and bearings; Stirling and gas turbine engines; and electric and hybrid vehicles.

  5. Conference Report: CAQD Conference 2013

    Directory of Open Access Journals (Sweden)

    Christina Silver

    2013-05-01

    Full Text Available Nestled on the banks of the river Lahn in central Germany, the 15th CAQD conference was held at Marburg. A beautiful provincial town, it is one of very few that was spared the bombings of WWII; now providing the perfect backdrop for meeting to discuss developments in qualitative technology. This was the second international conference in the series with more than 140 delegates from 14 countries, including: Canada, Brazil, Portugal, the UK, as well as Germany. Hosted by MAGMA, the Marburg Research Group for Methodology and Evaluation, in partnership with Philipps-University Marburg, CAQD prioritizes a user-focus which balances practical and methodological workshops with conference presentations. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs1302249

  6. Bringing (Century-Old) Technology into the Classroom, Part I: Teaching Mechanics and Thermodynamics with Antiques

    Science.gov (United States)

    Jewett, John W.

    2015-10-01

    The notion of bringing technology into the classroom has been the subject of many recent presentations at conferences and papers in physics teaching journals. The use of devices such as laptops, smartphones, tablets, and clickers is rising in today's classrooms and laboratories. PhET simulations have been available online for over a decade. A column in The Physics Teacher, called "iPhysicsLabs," was begun in February of 2012 and describes experiments to be carried out with smartphones and tablets. Students have become familiar with the operation and application of such technology. But are they aware of the underlying physics necessary to make the devices and the online simulations work? Much of the physics is hidden at the microscopic level in tiny circuit chips or in the workings of a distant server.

  7. NASA/IEEE MSST 2004 Twelfth NASA Goddard Conference on Mass Storage Systems and Technologies in cooperation with the Twenty-First IEEE Conference on Mass Storage Systems and Technologies

    Science.gov (United States)

    Kobler, Ben (Editor); Hariharan, P. C. (Editor)

    2004-01-01

    MSST2004, the Twelfth NASA Goddard / Twenty-first IEEE Conference on Mass Storage Systems and Technologies has as its focus long-term stewardship of globally-distributed storage. The increasing prevalence of e-anything brought about by widespread use of applications based, among others, on the World Wide Web, has contributed to rapid growth of online data holdings. A study released by the School of Information Management and Systems at the University of California, Berkeley, estimates that over 5 exabytes of data was created in 2002. Almost 99 percent of this information originally appeared on magnetic media. The theme for MSST2004 is therefore both timely and appropriate. There have been many discussions about rapid technological obsolescence, incompatible formats and inadequate attention to the permanent preservation of knowledge committed to digital storage. Tutorial sessions at MSST2004 detail some of these concerns, and steps being taken to alleviate them. Over 30 papers deal with topics as diverse as performance, file systems, and stewardship and preservation. A number of short papers, extemporaneous presentations, and works in progress will detail current and relevant research on the MSST2004 theme.

  8. 47{sup th} Annual conference on nuclear technology (AMNT 2016). Key topics / Outstanding know-how and sustainable innovations - enhanced safety and operation excellence

    Energy Technology Data Exchange (ETDEWEB)

    Raetzke, Christian [CONLAR - Consulting on Nuclear Law, Licensing and Regulation, Leipzig (Germany); Fischer, Erwin [PreussenElektra GmbH, Hannover (Germany). Management Board; Mohrbach, Ludger [VGB PowerTech e.V., Essen (Germany). Competence Center ' ' Nuclear Power Plants' '

    2016-08-15

    Summary report on the Key Topics ''Outstanding Know-How and Sustainable Innovations'' and ''Enhanced Safety and Operation Excellence'' of the 47{sup th} Annual Conference on Nuclear Technology (AMNT 2016) held in Hamburg, 10 to 12 May 2016. Other Sessions of AMNT 2016 will be covered in further issues of atw.

  9. MSaTERs: Mathematics, Science, and Technology Educators and Researchers of The Ohio State University. Proceedings of the Annual Spring Conference (2nd, May 16, 1998, Columbus, OH).

    Science.gov (United States)

    Reed, Michelle K., Ed.; Costner, Kelly M., Ed.

    The Mathematics, Science, and Technology Educators and Researchers of The Ohio State University (MSaTERS-OSU) is a newly formed student organization. Papers from the conference include: (1) "Was the Geometry Course, The Nature of Proof, Taught by Harold Pascoe Fawcett the Best Course Ever Taught in Secondary School?" (Frederick Flener); (2) "A…

  10. Promoting Educational Technology. Summary Report of the Annual Lake Okoboji Educational Media Leadership Conference (25th, Milford, Iowa, August 20-24, 1979).

    Science.gov (United States)

    Association for Educational Communications and Technology, Washington, DC.

    This summary report of the annual conference includes statements of delegate concerns prepared for the planning committee, presentations by three resource delegates on the promotion of educational technology at different levels, and reports from seven study committees. Lucy Ainsley discussed promotion strategies at the district level, K-12; Wesley…

  11. Digital Aircraft Sheet Metal Part Manufacturing System and Its Key Technology

    Institute of Scientific and Technical Information of China (English)

    Wang; Junbiao; Liu; Chuang

    2007-01-01

    The architecture of digital sheet metal manufacturing system is proposed based on the classification of sheet metal manufacturing information.The essence of digital manufacturing is the definition,management and transfer of information,and the key technologies are brought forward and described.It is pointed out that knowledge-based manufacturing elements design is necessary to make digital technology efficient.The management of all kinds of sheet metal manufacturing element information is to build single source of manufacturing data.Multi-state model-based digital transfer and coordination method is designed to provide a foundation for digital manufacturing of aircraft sheet metal part.The application of digital sheet metal manufacturing is exemplified with an aircraft sheet metal part.The application result is compared to that of the traditional analog transfer technology.It is shown that the developed technology can improve part quality,shorten manufacturing time and lower manufacturing cost.

  12. NASA-JPL overview, space technology and relevance to medicine (Conference Presentation)

    Science.gov (United States)

    van Zyl, Jakob

    2017-05-01

    There is special synergy between NASA space instruments and medical devices, especially those that may be implanted in the human body. For example, in both cases instruments have to be small, typically have to consume little power and often have to operate in harsh environments. JPL has a long history in using this synergy to leverage from the technology developed for space missions for application in medical fields. In this talk, we discuss the general overlap of technological requirements in the medical field and space science. We will highlight some examples where JPL instrumentation and engineering has been transferred successfully.

  13. 64 International conference "NUCLEUS-2014" Fundamental problems of nuclear physics, atomic power engineering and nuclear technologies

    OpenAIRE

    Vlasnikov, A. K.

    2014-01-01

    Тезисы 64 международной конференции «ЯДРО-2014» (Фундаментальные проблемы ядерной физики, атомной энергетики и ядерных технологий), БГУ, Минск, 1 – 4 июля 2014 года. The scientific program of the conference covers almost all problems in nuclear physics and its applications such as: neutron-rich nuclei, nuclei far from stability valley, giant resonances, many-phonon and many-quasiparticle states in nuclei, high-spin and super-deformed states in nuclei, synthesis of super-heavy elements, ...

  14. Oak Ridge National Laboratory Technology Logic Diagram. Volume 1, Technology Evaluation: Part A, Decontamination and Decommissioning

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Strategic Roadmap for the Oak Ridge Reservation is a generalized planning document that identifies broad categories of issues that keep ORNL outside full compliance with the law and other legally binding agreements. Possible generic paths to compliance, issues, and the schedule for resolution of the issues one identified. The role of the Oak Ridge National Laboratory Technology Logic Diagram (TLD) is then to identify specific site issues (problems), identify specific technologies that can be brought to bear on the issues, and assess the current status and readiness of these remediation technologies within the constraints of the schedule commitment. Regulatory requirements and commitments contained in the Strategic Roadmap for the Oak Ridge Reservation are also included in the TLD as constraints to the application of immature technological solutions. Some otherwise attractive technological solutions may not be employed because they may not be deployable on the schedule enumerated in the regulatory agreements. The roadmap for ORNL includes a list of 46 comprehensive logic diagrams for WM of low-level, radioactive-mixed, hazardous, sanitary and industrial. and TRU waste. The roadmapping process gives comparisons of the installation as it exists to the way the installation should exist under full compliance. The identification of the issues is the goal of roadmapping. This allows accurate and timely formulation of activities.

  15. Thirty-seventh ORNL/DOE conference on analytical chemistry in energy technology: Abstracts of papers

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    Abstracts only are given for papers presented during the following topical sessions: Opportunities for collaboration: Industry, academic, national laboratories; Developments in sensor technology; Analysis in containment facilities; Improving the quality of environmental data; Process analysis; Field analysis; Radiological separations; Interactive analytical seminars; Measurements and chemical industry initiatives; and Isotopic measurements and mass spectroscopy.

  16. MST 1: Proceedings of a conference on the integration of mathematics, science and technology in precollege education

    Energy Technology Data Exchange (ETDEWEB)

    Swyler, K. [ed.

    1995-11-01

    Example MST activities examined here show: (1) an inquiry-driven learning stimulus, involving (2) the synthesis of concepts in math, science and technology, through (3) the application of the scientific method and engineering problem solving/test protocols, and provoking (4) a stimulus for further exploration. A semi-exploratory learning approach offered background aimed at enabling participants to take meaningful courses of investigation; this approach must be balanced by maintaining contact with framework content standards. On the whole, the philosophy underlying the MST learning approach--as envisioned in the draft NYS Framework, and embodied in the example activities--is strongly endorsed. This endorsement is broad-based: those represented include teachers of mathematics, science, and technology, and school district administrators--in roughly equal numbers. Discussion centers not on whether the MST approach should be pursued, but on what is involved in doing it. Teams of conference participants were given time to plan or extend MST initiatives in their own districts. Outlines of the initiatives proposed by ten of the teams are disseminated herein.

  17. Proceedings of the Annual Conference on Magnetism and Magnetic Materials (37th) Held in Houston, Texas on 1-4 December 1993. Pages 5309-6146. Journal of Applied Physics. Volume 73. Number 10, Part 2 A

    Science.gov (United States)

    Reprint: Proceedings of the Annual Conference on Magnetism and Magnetic Materials (37th) Held in Houston, Texas on 1-4 December 1993. Pages 5309-6146. Journal of Applied Physics . Volume 73. Number 10, Part 2 A

  18. Proceedings of the Annual Conference on Magnetism and Magnetic Materials (37th) Held in Houston, Texas on 1-4 December 1993. Pages 5309-6146. Journal of Applied Physics. Volume 73. Number 10, Part 2 B,

    Science.gov (United States)

    Reprint: Proceedings of the Annual Conference on Magnetism and Magnetic Materials (37th) Held in Houston, Texas on 1-4 December 1993. Pages 5309-6146. Journal of Applied Physics . Volume 73. Number 10, Part 2 B,

  19. Oak Ridge K-25 Site Technology Logic Diagram. Volume 3, Technology evaluation data sheets; Part A, Characterization, decontamination, dismantlement

    Energy Technology Data Exchange (ETDEWEB)

    Fellows, R.L. [ed.

    1993-02-26

    The Oak Ridge K-25 Technology Logic Diagram (TLD), a decision support tool for the K-25 Site, was developed to provide a planning document that relates environmental restoration and waste management problems at the Oak Ridge K-25 Site to potential technologies that can remediate these problems. The TLD technique identifies the research necessary to develop these technologies to a state that allows for technology transfer and application to waste management, remedial action, and decontamination and decommissioning activities. The TLD consists of four separate volumes-Vol. 1, Vol. 2, Vol. 3A, and Vol. 3B. Volume 1 provides introductory and overview information about the TLD. Volume 2 contains logic diagrams. Volume 3 has been divided into two separate volumes to facilitate handling and use. This report is part A of Volume 3 concerning characterization, decontamination, and dismantlement.

  20. AINSE Plasma Science and Technology Conference and Elizabeth and Frederick White Workshop on Fundamental Problems in the Physics of Magnetically Confined Plasmas: Conference handbook

    Science.gov (United States)

    The handbook contains abstracts of papers and posters presented at the conference. The main topics relate to plasma physics and fusion, plasma processing and uses as well as specific fusion devices and experiments. Eighty-four out of ninety-two presentations were considered to be in the INIS subject scope and have been separately indexed.

  1. 10th KES Conference on Agent and Multi-Agent Systems : Technologies and Applications

    CERN Document Server

    Chen-Burger, Yun-Heh; Howlett, Robert; Jain, Lakhmi

    2016-01-01

    The modern economy is driven by technologies and knowledge. Digital technologies can free, shift and multiply choices, often intruding on the space of other industries, by providing new ways of conducting business operations and creating values for customers and companies. The topics covered in this volume include software agents, multi-agent systems, agent modelling, mobile and cloud computing, big data analysis, business intelligence, artificial intelligence, social systems, computer embedded systems and nature inspired manufacturing, etc. that contribute to the modern Digital Economy. This volume highlights new trends and challenges in agent, new digital and knowledge economy research and includes 28 papers classified in the following specific topics: business process management, agent-based modeling and simulation, anthropic-oriented computing, learning paradigms, business informatics and gaming, digital economy, and advances in networked virtual enterprises. Published papers were selected for presentatio...

  2. The Processing of Parts with Group Technology in Individual CNC Machining Center

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    This paper proposes a new machining method for part s using group technology suitable for workshop condition in China. The method divi des the parts of each product into similar kinds according to their features, an d installs each kind of parts on different working platforms. The working platfo rm, as a unit, is designed to be flexible and is interchangeable. It can be hung and fitted to the CNC working table. By changing the platforms in turn, nearly all the parts of one product can be processed with o...

  3. 9th Annual CMMI Technology Conference and User Group-Tuesday

    Science.gov (United States)

    2009-11-19

    9137 - ITIL V3.0 Compliance Benchmarking with CMMI-SVC SCAMPI A, Mr. Jeff Dutton, Jacobs Technology, Inc. · 9397 - Strategies for...Implementation of CMMI-SVC, Mr. Kobi Picker, K.V.P. Consulting · 9264 - Applying Lean Principles to the CMMI® for Services and ITIL , Mr. Tim Olson, Lean...Standards Progress Check and Appraisal Mr. Kobi Vidar, K.V.P. Consulting 9137 - ITIL V3.0 Compliance Benchmarking with CMMI-SVC SCAMPI A

  4. International Interdisciplinary Conference (1st) on the Influence of Culture (Japanese/American) on Technological Innovation

    Science.gov (United States)

    1991-11-01

    the management of innovation. Dr. Daniel P. Button, Dupont Japan Technical Center, was able to discuss Dupont’s experience both in Japan and the...and Solow , Robert M., ’Made in America: Regaining the Productive Edge, ACT C.,wisssm m hntiu g PhmkxhW% MIT Pres& 199. 64 Forbes, Nashad, -Technology...Publishers, 138 Ltd., Oxford, 1989; Alan M. Wolsky, Robert F. Giese and Edward J. Daniels , "The New Superconductors: Prospects for Applications", Scienfic

  5. 2005 5th Annual CMMI Technology Conference and User Group. Volume 3 - Wednesday

    Science.gov (United States)

    2005-11-17

    formerly Sperry Flight Systems) and 2 years with Tracor Aerospace, developed or managed the development of embedded software for avionics systems...estimating, tracking, forecasting, and benchmarking. Mr. Ross, during 17 years with Honeywell Air Transport Systems (formerly Sperry Flight Systems...Implementing CMMI in a Services Environment Thomas E. Zience and Roger W. Lee BAE Systems Information Technology All Rights Reserved by BAE Systems Information

  6. Technology prevention of addictive behavior in children as part of a healthy lifestyle

    Directory of Open Access Journals (Sweden)

    Zolotova A.D.

    2014-03-01

    Full Text Available Purpose : to develop a technology of social and educational prevention of addictive behavior in children as part of the organization of a healthy lifestyle. Material : a theoretical analysis and compilation of more than 50 sources of scientific and methodological literature. Applied methods of modeling and design of social and educational activities. Results : the technology of social and educational prevention of addictive behavior of children in the territorial community. The main components of addictive behavior prevention technologies children are: diagnostic levels of addictive behavior of children in the territorial community; goal-prevention technologies, the choice of technology development or prevention of addictive behavior in children, preparation and planning of prevention, the introduction of technology, expertise and evaluation of the effectiveness of the technology deployed, summing outcomes. Conclusions . prevention of addictive behavior is an integral part of the organization of a healthy lifestyle for children. Procedural embodiment prevention of addictive behavior of children in the life of the territorial community is represented as a developed social and educational technology.

  7. [Hi-tech trends in future dentistry--Part B: diagnostic and therapeutic technologies].

    Science.gov (United States)

    Feuerstein, O; Houri-Haddad, Y; Lipovetsky, M; Perez-Davidi, M; Weiss, E I

    2006-10-01

    The technology advance and the growing amount of knowledge had a great impact on dental practice for the last decade. The prominent change began with digital revolution presenting new computed technologies and accessible communicational means for sharing literal and imaging information. Following toward the coming biotechnological revolution, dentistry will be even further changed. This article presents dental innovations of Israeli Hi-Tech companies, sorted into two groups. Part A of the article discussed the area of computed imaging systems for educational purposes, diagnostic and treatment. While part B presents other diagnostic or therapeutic technologies. However, because some of the described technologies are still on their R&D (Research and Development) phases, they are not commercialized yet in the market.

  8. News Event: UK to host Science on Stage Travel: Gaining a more global perspective on physics Event: LIYSF asks students to 'cross scientific boundaries' Competition: Young Physicists' tournament is international affair Conference: Learning in a changing world of new technologies Event: Nordic physical societies meet in Lund Conference: Tenth ESERA conference to publish ebook Meeting: Rugby meeting brings teachers together Note: Remembering John L Lewis OBE

    Science.gov (United States)

    2013-03-01

    Event: UK to host Science on Stage Travel: Gaining a more global perspective on physics Event: LIYSF asks students to 'cross scientific boundaries' Competition: Young Physicists' tournament is international affair Conference: Learning in a changing world of new technologies Event: Nordic physical societies meet in Lund Conference: Tenth ESERA conference to publish ebook Meeting: Rugby meeting brings teachers together Note: Remembering John L Lewis OBE

  9. 9th KES Conference on Agent and Multi-Agent Systems : Technologies and Applications

    CERN Document Server

    Howlett, Robert; Jain, Lakhmi

    2015-01-01

    Agents and multi-agent systems are related to a modern software paradigm which has long been recognized as a promising technology for constructing autonomous, complex and intelligent systems. The topics covered in this volume include agent-oriented software engineering, agent co-operation, co-ordination, negotiation, organization and communication, distributed problem solving, specification of agent communication languages, agent privacy, safety and security, formalization of ontologies and conversational agents. The volume highlights new trends and challenges in agent and multi-agent research and includes 38 papers classified in the following specific topics: learning paradigms, agent-based modeling and simulation, business model innovation and disruptive technologies, anthropic-oriented computing, serious games and business intelligence, design and implementation of intelligent agents and multi-agent systems, digital economy, and advances in networked virtual enterprises. Published p...

  10. New technologies in health care. Part 1: A moral and ethical predicament.

    Science.gov (United States)

    Lebuis, Ariane; Lai, Beverly; Emami, Elham; Feine, Jocelyne S

    2008-09-01

    With the rapid evolution of technology and the development and marketing of new procedures in dentistry, dentists have difficulty keeping pace with all of this new technology and information. How do these clinicians know whether a new product, technique or technological advance is good and should be recommended? At what point do they have an obligation to inform their patients about new procedures supported by research? This first report of a 2-part series investigates the ethical aspects of these issues and describes some of the professional ethical dilemmas and obligations involved when new therapies are offered to the public.

  11. RFID Demystified: Part 1. The technology, Benefits and Barriers to Implementation

    OpenAIRE

    Wilding, Richard D.; Delgardo, Tiago

    2004-01-01

    Radio Frequency Identification (RFID) has by some commentators been heralded as a technology that will have as big an impact on supply chain operations as the advent of computer based planning systems in the early 1970’s. Whereas others say it is just yet another technology fad that in a couple of years will have gone away. We are continually reading conflicting messages about RFID, this is partly due to the term being miss used in some quarters and also because as with all new technologies i...

  12. Novel label-free biosensing technology for monitoring of aqueous solutions (Conference Presentation)

    Science.gov (United States)

    Kehl, Florian; Bielecki, Robert; Follonier, Stephane; Dorokhin, Denis

    2016-03-01

    Waste water, drinking water and other industrial water sources are more and more/increasingly polluted with a large variety of contaminants, such as pesticides or residuals of pharmaceuticals. These compounds can impact human and animal organisms and lead to serious health issues. Today, in order to analyze the presence and quantity of the abovementioned micropollutants, samples are typically sent to specialized centralized laboratories and their processing may take up to several days. In order to meet the demand for continuous and consistent monitoring of aqueous solutions we propose a novel label-free technology system comprising proprietary chip and reader device designs. The core of the system is constituted by a planar-grated-waveguide (PGW) chip. Label-free biosensors, based on PGWs are sensitive to effective refractive index changes caused by the adsorption of biomolecules (micropollutants) onto the sensor surface or due to refractive index changes of the bulk solution. The presented reader device operates with a novel readout concept based on a scanning MEMS mirror for the angular interrogation of input grating couplers at a high repetition rate. The reader has fully integrated optics, electronics and fluidics and at the same time consumes limited energy (portable, field use ready). In the recent experiments, the effectiveness of the technology has been demonstrated with various liquids and bioassays showing (i) an excellent refractometric sensitivity with a limit of detection towards effective refractive index changes of ▵neff < 2 x 10-7, and (ii) the capability to perform affinity measurements for large (<150 kDa) and small (<250 Da) molecules.

  13. Multimodal, 3D pathology-mimicking bladder phantom for evaluation of cystoscopic technologies (Conference Presentation)

    Science.gov (United States)

    Smith, Gennifer T.; Lurie, Kristen L.; Zlatev, Dimitar V.; Liao, Joseph C.; Ellerbee, Audrey K.

    2016-02-01

    Optical coherence tomography (OCT) and blue light cystoscopy (BLC) have shown significant potential as complementary technologies to traditional white light cystoscopy (WLC) for early bladder cancer detection. Three-dimensional (3D) organ-mimicking phantoms provide realistic imaging environments for testing new technology designs, the diagnostic potential of systems, and novel image processing algorithms prior to validation in real tissue. Importantly, the phantom should mimic features of healthy and diseased tissue as they appear under WLC, BLC, and OCT, which are sensitive to tissue color and structure, fluorescent contrast, and optical scattering of subsurface layers, respectively. We present a phantom posing the hollow shape of the bladder and fabricated using a combination of 3D-printing and spray-coating with Dragon Skin (DS) (Smooth-On Inc.), a highly elastic polymer to mimic the layered structure of the bladder. Optical scattering of DS was tuned by addition of titanium dioxide, resulting in scattering coefficients sufficient to cover the human bladder range (0.49 to 2.0 mm^-1). Mucosal vasculature and tissue coloration were mimicked with elastic cord and red dye, respectively. Urethral access was provided through a small hole excised from the base of the phantom. Inserted features of bladder pathology included altered tissue color (WLC), fluorescence emission (BLC), and variations in layered structure (OCT). The phantom surface and underlying material were assessed on the basis of elasticity, optical scattering, layer thicknesses, and qualitative image appearance. WLC, BLC, and OCT images of normal and cancerous features in the phantom qualitatively matched corresponding images from human bladders.

  14. Hand-out: SFOE research conference on traffic technology and accumulators; Handout BFE-Forschungstagung Technologiebereich Verkehr Technologiebereich Akkumulatoren

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    This comprehensive collection contains presentation slides presented at a research conference organised by the Swiss Federal Office of Energy (SFOE) at the Federal Institute of Science and Technology in Zurich in February 2004. Apart from two presentations on the future of the 'SwissEnergy' programme and research in the EU, fifteen further presentations are included. These cover the 'Cleaner Drive' project, the influence of lightweight electric vehicles on mobility behaviour, the advantages of 'EcoDrive' in the year 2010, results of a study on 'park-and-ride' facilities, the CO{sub 2}-effect, innovation, the possibilities offered by S-Cap capacitors and 'Sun Fuels'. Further contributions include the 'Downhill Coaster', weather-protection for bicycles, natural-gas fuelled buses, the operation of an Otto-motor using a petrol / natural gas / reformer gas mix, usage and optimisation of the 'Zebra' battery, innovative vehicles for the 'Novatlantis'-pilot region in Basle and a contribution on climate protection in the aviation area.

  15. International Cryocooler Conference

    CERN Document Server

    Cryocoolers 13

    2005-01-01

    This is the 13th volume in the conference series. Over the years the International Cryocoolers Conference has become the preeminent worldwide conference for the presentation of the latest developments and test experiences with cryocoolers. The typical applications of this technology include cooling space and terrestrial infrared focal plane arrays, space x-ray detectors, medical applications, and a growing number of high-temperature super-capacitor applications.

  16. A dual use case study of space technologies for terrestrial medical applications (Conference Presentation)

    Science.gov (United States)

    Cozmuta, Ioana

    2017-05-01

    Many challenges exist in understanding the human body as a whole, its adaptability, its resilience, its immunological response, its healing and regeneration power. New knowledge is usually obtained by exploring unique conditions and environments and space is one such variable. Primarily, these attributes have been studied in space for the purpose of understanding the effect of the space environment on long duration space travel. However a myriad of lessons learned have emerged that are important for terrestrial medicine problems such as cardiovascular changes, intracranial pressure changes, vision changes, reduced immunity, etc. For medical study purposes, the changes induced by the space environment on the human body are in general fast and predictable; they persist while in the space environment but also revert to the initial pre-flight healthy state upon return to Earth. This provides a unique cycle to study wellness and disease prediction as well as to develop more effective countermeasures for the benefit of people on earth. At a scientific level, the environment of space can be used to develop new lines of investigations and new knowledge to push the terrestrial state of the art (i.e. study of phase diagrams, identification of new system's states, etc). Moreover, the specialized requirements for space medicine have driven advances in terrestrial medical technologies in areas such as monitoring, diagnostic, prevention and treatment. This talk will provide an overview of compelling examples in key areas of interest for terrestrial medical applications.

  17. Automatic detection and counting of cattle in UAV imagery based on machine vision technology (Conference Presentation)

    Science.gov (United States)

    Rahnemoonfar, Maryam; Foster, Jamie; Starek, Michael J.

    2017-05-01

    Beef production is the main agricultural industry in Texas, and livestock are managed in pasture and rangeland which are usually huge in size, and are not easily accessible by vehicles. The current research method for livestock location identification and counting is visual observation which is very time consuming and costly. For animals on large tracts of land, manned aircraft may be necessary to count animals which is noisy and disturbs the animals, and may introduce a source of error in counts. Such manual approaches are expensive, slow and labor intensive. In this paper we study the combination of small unmanned aerial vehicle (sUAV) and machine vision technology as a valuable solution to manual animal surveying. A fixed-wing UAV fitted with GPS and digital RGB camera for photogrammetry was flown at the Welder Wildlife Foundation in Sinton, TX. Over 600 acres were flown with four UAS flights and individual photographs used to develop orthomosaic imagery. To detect animals in UAV imagery, a fully automatic technique was developed based on spatial and spectral characteristics of objects. This automatic technique can even detect small animals that are partially occluded by bushes. Experimental results in comparison to ground-truth show the effectiveness of our algorithm.

  18. Low-cost, smartphone based frequency doubling technology visual field testing using virtual reality (Conference Presentation)

    Science.gov (United States)

    Alawa, Karam A.; Sayed, Mohamed; Arboleda, Alejandro; Durkee, Heather A.; Aguilar, Mariela C.; Lee, Richard K.

    2017-02-01

    Glaucoma is the leading cause of irreversible blindness worldwide. Due to its wide prevalence, effective screening tools are necessary. The purpose of this project is to design and evaluate a system that enables portable, cost effective, smartphone based visual field screening based on frequency doubling technology. The system is comprised of an Android smartphone to display frequency doubling stimuli and handle processing, a Bluetooth remote for user input, and a virtual reality headset to simulate the exam. The LG Nexus 5 smartphone and BoboVR Z3 virtual reality headset were used for their screen size and lens configuration, respectively. The system is capable of running the C-20, N-30, 24-2, and 30-2 testing patterns. Unlike the existing system, the smartphone FDT tests both eyes concurrently by showing the same background to both eyes but only displaying the stimulus to one eye at a time. Both the Humphrey Zeiss FDT and the smartphone FDT were tested on five subjects without a history of ocular disease with the C-20 testing pattern. The smartphone FDT successfully produced frequency doubling stimuli at the correct spatial and temporal frequency. Subjects could not tell which eye was being tested. All five subjects preferred the smartphone FDT to the Humphrey Zeiss FDT due to comfort and ease of use. The smartphone FDT is a low-cost, portable visual field screening device that can be used as a screening tool for glaucoma.

  19. National Educators' Workshop: Update 2003. Standard Experiments in Engineering, Materials Science, and Technology. Part 1

    Science.gov (United States)

    Prior, Edwin J. (Compiler); Jacobs, James A. (Compiler); Edmonson, William (Compiler); Wilkerson, Amy (Compiler)

    2004-01-01

    The 18th Annual National Educators Workshop [NEW:Update 2003] was a part of NASA Langley s celebration of the Centennial of Controlled, Powered Flight by Orville and Wilbur Wright on December 17, 1903. The conference proceedings from NEW:Update 2003 reflect the Flight 100 theme by first providing a historic perspective on the remarkable accomplishments of the Wright Brothers. The historical perspective set the stag for insights into aeronautics and aerospace structures and materials now and into the future. The NEW:Update 2003 proceedings provide valuable resources to educators and students in the form of visuals, experiments and demonstrations for classes/labs at levels ranging from precollege through college education.

  20. National Educators' Workshop: Update 2003. Standard Experiments in Engineering, Materials Science, and Technology. Part 2

    Science.gov (United States)

    Prior, Edwin J. (Compiler); Jacobs, James A. (Compiler); Edmonson, William (Compiler); Wilkerson, Amy (Compiler)

    2004-01-01

    The 18th Annual National Educators Workshop [NEW:Update 2003] was a part of NASA Langley s celebration of the Centennial of Controlled, Powered Flight by Orville and Wilbur Wright on December 17, 1903. The conference proceedings from NEW:Update 2003 reflect the Flight 100 theme by first providing a historic perspective on the remarkable accomplishments of the Wright Brothers. The historical perspective set the stag for insights into aeronautics and aerospace structures and materials now and into the future. The NEW:Update 2003 proceedings provide valuable resources to educators and students in the form of visuals, experiments and demonstrations for classes/labs at levels ranging from precollege through college education.

  1. Beyond activity tracking: next-generation wearable and implantable sensor technologies (Conference Presentation)

    Science.gov (United States)

    Mercier, Patrick

    2017-05-01

    Current-generation wearable devices have had success continuously measuring the activity and heart rate of subjects during exercise and daily life activities, resulting in interesting new data sets that can, though machine learning algorithms, predict a small subset of health conditions. However, this information is only very peripherally related to most health conditions, and thus offers limited utility to a wide range of the population. In this presentation, I will discuss emerging sensor technologies capable of measuring new and interesting parameters that can potentially offer much more meaningful and actionable data sets. Specifically, I will present recent work on wearable chemical sensors that can, for the first time, continuously monitor a suite of parameters like glucose, alcohol, lactate, and electrolytes, all while wirelessly delivering these results to a smart phone in real time. Demonstration platforms featuring patch, temporary tattoo, and mouthguard form factors will be described, in addition to the corresponding electronics necessary to perform sensor conditioning and wireless readout. Beyond chemical sensors, I will also discuss integration strategies with more conventional electrophysiological and physical parameters like ECG and strain gauges for cardiac and respiration rate monitoring, respectively. Finally, I will conclude the talk by introducing a new form of wireless communications in body-area networks that utilize the body itself as a channel for magnetic energy. Since the power consumption of conventional RF circuits often dominates the power of wearable devices, this new magnetic human body communication technique is specifically architected to dramatically reduce the path loss compared to conventional RF and capacitive human body communication techniques, thereby enabling ultra-low-power body area networks for next-generation wearable devices.

  2. Lunar and Planetary Science Conference, 13th, Houston, TX, March 15-19, 1982, Proceedings. Part 1

    Science.gov (United States)

    Boynton, W. V.; Ahrens, T. J.

    The present conference on planetary and lunar science considers theoretical models for the composition of the Venus crust, the lunar crust, the prediction of phase relationships in planetary mantles, the volumetric analysis of complex lunar craters, grazing impacts on Mars, the determination of lunar structure by means of electrical conductivity and seismic experiments, results of studies on the Apollo 16 site rocks, as well as Apollo 14, 15 and 17 lunar glasses and regoliths, and carbon components and isotopic compositions of chondritic meteorites. Also discussed are iron meteorites, interplanetary dust and tektites, and such theoretical and experimental issues as refractory condensates and chondrules from solar furnace experiments, molecular synthesis through the irradiation of silicates, and the adsorption of excess fission Xe.

  3. Radiation`96. Conference handbook

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    The conference program includes eight invited lectures which cover a range of contemporary topics in radiation science and technology. In addition, thirty-two oral papers were presented, along with forty-five posters. The conference handbook contains one-page precis or extended abstracts of all presentations, and is a substantial compendium of current radiation research in Australia.

  4. DOE underground storage tank waste remediation chemical processing hazards. Part I: Technology dictionary

    Energy Technology Data Exchange (ETDEWEB)

    DeMuth, S.F.

    1996-10-01

    This document has been prepared to aid in the development of Regulating guidelines for the Privatization of Hanford underground storage tank waste remediation. The document has been prepared it two parts to facilitate their preparation. Part II is the primary focus of this effort in that it describes the technical basis for established and potential chemical processing hazards associated with Underground Storage Tank (UST) nuclear waste remediation across the DOE complex. The established hazards involve those at Sites for which Safety Analysis Reviews (SARs) have already been prepared. Potential hazards are those involving technologies currently being developed for future applications. Part I of this document outlines the scope of Part II by briefly describing the established and potential technologies. In addition to providing the scope, Part I can be used as a technical introduction and bibliography for Regulatory personnel new to the UST waste remediation, and in particular Privatization effort. Part II of this document is not intended to provide examples of a SAR Hazards Analysis, but rather provide an intelligence gathering source for Regulatory personnel who must eventually evaluate the Privatization SAR Hazards Analysis.

  5. Review on Cold Spray Process and Technology: Part I—Intellectual Property

    Science.gov (United States)

    Irissou, Eric; Legoux, Jean-Gabriel; Ryabinin, Anatoly N.; Jodoin, Bertrand; Moreau, Christian

    2008-12-01

    The number of research papers as well as of patents and patent applications on cold spray and cold spray related technologies has grown exponentially in the current decade. This rapid growth of activity brought a tremendous amount of information on this technology in a short period of time. The main motivation for this review is to summarize the rapidly expanding common knowledge on cold spray to help researchers and engineers already or soon to be involved for their future endeavors with this new technology. Cold spray is one of the various names for describing an all-solid-state coating process that uses a high-speed gas jet to accelerate powder particles toward a substrate where they plastically deform and consolidate upon impact. Cold gas dynamic spray, cold spray, kinetic spray, supersonic particle deposition, dynamic metallization or kinetic metallization are all terminologies found in the literature that designate the above-defined coating process. This review on cold spray technology is divided into two parts. In this article, Part I, patents and patent applications related to this process are reviewed, starting from the first few mentions of the idea at the beginning of the 20th century to its practical discovery in Russia in the 1980s and its subsequent occidental development and commercialization. The patent review encompasses Russian and USA patents and patent applications. Part II will review the scientific literature giving a general perspective of the current understanding and capability of this process.

  6. Smart Design : First International Conference Proceedings

    CERN Document Server

    2012-01-01

    Good product designs merge materials, technology and hardware into a unified user experience; one where the technology recedes into the background and people benefit from the capabilities and experiences available. By focusing on functional gain, critical awareness and emotive connection, even the most multifaceted and complex technology can be made to feel straightforward and become an integral part of daily life. Researchers, designers and developers must understand how to progress or appropriate the right technical and human knowledge to inform their innovations. The 1st International Smart Design conference provides a timely forum and bring together researchers and practitioners to discuss issues, identify challenges and future directions, and share their R&D findings and experiences in the areas of design, materials and technology. This proceedings of the 1st Smart Design conference held at Nottingham Trent University in November 2011 includes summaries of the talks given on topics ranging from intel...

  7. Improving education and supervision of Queensland X-ray Operators through video conference technology: A teleradiography pilot project.

    Science.gov (United States)

    Rawle, Marnie; Oliver, Tanya; Pighills, Alison; Lindsay, Daniel

    2017-04-13

    X-ray Operator (XO) supervision in Queensland is performed by radiographers in a site removed from the XO site. This has historically been performed by telephone when the XO requires immediate help, as well as post-examination through radiographer review and the provision of written feedback on images produced. This project aimed to improve image quality through the provision of real-time support of XOs by the introduction of video conference (VC) supervision. A 6-month pilot project compared image quality with and without VC supervision. VC equipment was installed in the X-ray room at two rural sites, as well as at the radiographer site, to enable visual and oral supervision. The VC unit enabled visualisation of the X-ray examination technique as it was being undertaken, as well as the images produced prior to transmission to the Picture Archiving and Communication System (PACS). Statistically significant improvement in image quality criteria measures were seen for patient positioning (P = 0.008), image quality (P radiographer for assistance, although, assistance was actually provided in 88.3% of examinations. This project has demonstrated that significant improvement in image quality is achievable with VC supervision. A larger study with a control arm that did not receive direct supervision should be used to validate the findings of this study. © 2017 The Authors. Journal of Medical Radiation Sciences published by John Wiley & Sons Australia, Ltd on behalf of Australian Society of Medical Imaging and Radiation Therapy and New Zealand Institute of Medical Radiation Technology.

  8. Abstracts: Papers to be Presented at the Joint Conference for Social Studies of Science (4S) and the European Association for the Study of Science and Technology (EASST) Amsterdam, 16-19 November 1988.

    Science.gov (United States)

    Adams, C.; And Others

    1988-01-01

    Presents about 200 abstracts of papers presented at the joint conference of the Society for Social Studies of Science (4S) and the European Association for the Study of Science and Technology (EASST) Amsterdam, 16-19 November 1988. (YP)

  9. 10th International Conference Mechatronics

    CERN Document Server

    Jabloński, Ryszard

    2014-01-01

    Mechatronics, as the integrating framework of mechanical engineering, electrical engineering, computer technology, control engineering and automation forms a crucial part in the design, manufacture and maintenance of a wide range of engineering products and processes. The mechatronics itself changes rapidly in last decade, from original mixture of subfields into original approach in engineering as a technical discipline. The book you are holding is aimed to help the reader to orient in this evolving field of science and technology. „Mechatronics 2013: Recent Technological and Scientific Advances“ is the fourth volume following the previous editions in 2007, 2009 and 2011, providing the comprehensive and accessible coverage of advances in mechatronics presented on the 10th International Conference Mechatronics 2013, hosted this year at the Brno University of Technology, Czech Republic. The contributions, that passed the thorough review process, give an insight into current trends in research and developmen...

  10. Conference on the Trend in Income Inequality in the U.S. Part I, Trends in Inequality of Well-Offness in the United States since World War II. Part 2, Conference Overview: Conceptual Issues, Data Issues, and Policy Implications

    Science.gov (United States)

    Taussig, Michael K.; Danziger, Sheldon

    The first part of this document summarizes the current state of knowledge on trends in inequality of economic well-being in the United States since World War II. It surveys alternative answers to the often asked question: Has inequality in the U.S. increased, decreased, or remained roughly the same over a period of time? Intelligent laymen, and…

  11. Origin and dissemination of the pollen-part mutated SC haplotype which confers self-compatibility in apricot (Prunus armeniaca).

    Science.gov (United States)

    Halász, Júlia; Pedryc, Andrzej; Hegedus, Attila

    2007-01-01

    In China, its centre of origin, apricot (Prunus armeniaca) is self-incompatible. However, most European cultivars are self-compatible. In most cases, self-compatibility is a result of a loss-of-function mutation within the pollen gene (SFB) in the SC haplotype. Controlled pollinations performed in this work revealed that the cross 'Ceglédi óriás' (S8S9)x'Ceglédi arany' (SCS9) set well, as expected, but the reciprocal cross did not. Apricot S8, S9 and SC haplotypes were analysed using a multilevel approach including fruit set evaluation, pollen tube growth analysis, RNase activity assays, polymerase chain reaction (PCR) analysis and DNA sequencing of the S-RNase and SFB alleles. SFB8 was revealed to be the first known progenitor allele of a naturally occurring self-compatibility allele in Prunus, and consequently SC=The first intron of SC-RNase is a phase one intron, indicating its more recent evolutionary origin compared with the second intron. Sequence analysis of different cultivars revealed that more single nucleotide polymorphisms accumulated in SC-RNase than in SFBC. New methods were designed to allow high-throughput analysis of S genotypes of apricot cultivars and selections. S-RNase sequence data from various sources helped to elucidate the putative origin and dissemination of self-compatibility in apricot conferred by the SC haplotype.

  12. Technology improvement of chromium on steel parts electrodeposition using complex command and control systems

    Science.gov (United States)

    Stănescu, A.; Alecusan, A. M.; Dimitescu, A.

    2016-08-01

    The paper aims to provide improved technological process of electrochemical deposition of chromium on steel for decorative parts for corrosion protection but also to improve mechanical properties. The proposed idea is perfectly suited to be grafted onto existing electrodeposition installations, but it can be applied successfully in the development of new such plants. Complex command and control systems are designed to operate in high aggressive environmental conditions specific to these types of installations. The theoretical part completes the experimental results obtained on a laboratory facility.

  13. A BIBLIOGRAPHY ON INFORMATION SCIENCE AND TECHNOLOGY FOR 1966. PART 2

    Science.gov (United States)

    The primary aim of the continuing bibliography is to assist the authors of the chapters in ’Annual Review of Information Science and Technology’ in discovering the existence or determining the identity of documents relevant to their topics. The style of entries also reflects the authors’ requirements. The ’Abbreviations and Index for Periodicals Cited’ is cumulative for parts I and II.

  14. US green building conference - 1994

    Energy Technology Data Exchange (ETDEWEB)

    Fanney, A.H.; Whitter, K.M.; Traugott, A.E.; Simon, L.N. [eds.

    1994-12-31

    This report constitutes the proceedings of the Green Building Conference held in Gaithersburg, Maryland, February 16-17, 1994. The conference was co-sponsored by the National Institute of Standards and Technology (NIST) and the US Green Building Council (USGBC). Over 450 individuals attended the conference representing building product manufacturers, building owners and managers, environmental groups, utilities, contractors, builders, architects, engineers, and the local, state, and the federal governments. The conference provided an opportunity to acquire practical, useful information on green buildings, resources, and guidelines. Eighteen papers were presented at the conference. Separate abstracts and indexing were prepared for each paper for inclusion in the Energy Science and Technology Database.

  15. Report on the Conference on Transposition and Genome Engineering 2015 (TGE 2015): advancing cutting-edge genomics technology in the ancient city of Nara.

    Science.gov (United States)

    Woltjen, Knut; Yamamoto, Takashi; Kokubu, Chikara; Takeda, Junji

    2016-05-01

    From November 17 to 20 in 2015, the Conference on Transposition and Genome Engineering 2015 (TGE 2015) was held at Nara Kasugano International Forum-IRAKA-in Nara, Japan, located at the center of Nara Park. All of the presentations were carried out at Nohgaku hall in Nara Kasugano International Forum-IRAKA. Participation totaled 148 persons (30 international, 118 domestic), who were able to engage in lively scientific discussions over the 4-day period. The guest speaker list consisted of many top-notch international researchers, an achievement for which the conference received praise from the attendees. There were 36 oral presentations including the keynote lecture (22 presentations from guest speakers, complemented with 14 selected from abstract submissions). Additionally, there were 46 poster presentations. The conference uniquely combined research mainly from two different genomics approaches: (i) transposon technology allowing random genomic integration followed by gene discovery-related phenotypes and (ii) genome editing technology with designer nuclease allowing precise modification of a gene-of-interest.

  16. 37th National Systems Conference

    CERN Document Server

    Yadav, Sandeep; Adhikari, Bibhas; Seshadri, Harinipriya; Fulwani, Deepak

    2015-01-01

    The book is a collection of peer-reviewed scientific papers submitted by active researchers in the 37th National System Conference (NSC 2013). NSC is an annual event of the Systems Society of India (SSI), primarily oriented to strengthen the systems movement and its applications for the welfare of humanity. A galaxy of academicians, professionals, scientists, statesman and researchers from different parts of the country and abroad are invited to attend the conference. The book presents research articles in the areas of system’s modelling, complex network modelling, cyber security, sustainable systems design, health care systems, socio-economic systems, and clean and green technologies. The book can be used as a tool for further research.

  17. Student Support for EIPBN 2016 Conference - Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Farrow, Reginald C. [New Jersey Inst. of Technology, Newark, NJ (United States)

    2017-01-26

    The 60th International Conference on Electron, Ion, and Photon Beam Technology and Nanofabrication (EIPBN) was held in Pittsburgh, PA, from May 31st to June 3rd, 2016. The conference received technical co-sponsorship from the American Vacuum Society (AVS) in cooperation with the Optical Society of America (OSA), and the American Physical Society (APS). The conference was a great success in large part because financial support allowed robust participation from students. The students gave oral and poster presentations of their research and many published peer-reviewed articles in a special conference issue of the Journal of Vacuum Science and Technology B. The Department of Energy Office of Basic Energy Sciences supported 10 students from US universities with a $5,000 grant (DE-SC0015555).

  18. Analysis and correction of defects within parts fabricated using powder bed fusion technology

    Science.gov (United States)

    Mireles, Jorge; Ridwan, Shakerur; Morton, Philip A.; Hinojos, Alejandro; Wicker, Ryan B.

    2015-09-01

    Quality assurance is an important topic for additive manufacturing (AM) and often seen as a requirement for the transition and adoption of the technology toward fabrication of end use applications. As AM technologies are used for production, it is necessary to ensure high quality, repeatable, and reproducible components are manufactured. Various nondestructive examination techniques have been used to evaluate AM-fabricated parts to determine part quality post-fabrication (e.g. scanning and/or microstructural characterization). In situ monitoring methods have been developed for AM technologies to enable defect detection and have potential to be used for in situ monitoring and correction of fabrication anomalies (e.g. undesired temperature gradients and porosity). In this research, defects (e.g. pores) were seeded into parts fabricated using the powder bed fusion AM process, electron beam melting, and monitored using in situ infrared (IR) thermography. Results from layerwise thermography were compared with results obtained using computer tomography (CT) scanning techniques. Although the measured geometry of the seeded defects between IR thermography and CT was substantially different (area difference of ∼60%), the thermographs did provide a good indication of defects present within a fabricated part. Furthermore, defect correction methods were evaluated including post-processing methods such as hot isostatic pressing as well as in situ correction methods such as layer re-melting. Re-melting a porous layer successfully corrected defects and demonstrates a potential method for in situ defect correction if implemented in future systems equipped with automatic feedback control of powder bed fusion processes.

  19. EGC Conferences

    CERN Document Server

    Ritschard, Gilbert; Pinaud, Bruno; Venturini, Gilles; Zighed, Djamel; Advances in Knowledge Discovery and Management

    This book is a collection of representative and novel works done in Data Mining, Knowledge Discovery, Clustering and Classification that were originally presented in French at the EGC'2012 Conference held in Bordeaux, France, on January 2012. This conference was the 12th edition of this event, which takes place each year and which is now successful and well-known in the French-speaking community. This community was structured in 2003 by the foundation of the French-speaking EGC society (EGC in French stands for ``Extraction et Gestion des Connaissances'' and means ``Knowledge Discovery and Management'', or KDM). This book is intended to be read by all researchers interested in these fields, including PhD or MSc students, and researchers from public or private laboratories. It concerns both theoretical and practical aspects of KDM. The book is structured in two parts called ``Knowledge Discovery and Data Mining'' and ``Classification and Feature Extraction or Selection''. The first part (6 chapters) deals with...

  20. International Conference on SEMS 2012

    CERN Document Server

    Liu, Chuang; Scientific explanation and methodology of science; SEMS 2012

    2014-01-01

    This volume contains the contributed papers of invitees to SEMS 2012 who have also given talks at the conference. The invitees are experts in philosophy of science and technology from Asia (besides China), Australia, Europe, Latin America, North America, as well as from within China. The papers in this volume represent the latest work of each researcher in his or her expertise; and as a result, they give a good representation of the cutting-edge researches in diverse areas in different parts of the world.

  1. Summary of the Midwest conference on small-scale hydropower in the Midwest: an old technology whose time has come

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-05-01

    A variety of decision makers convened to examine and discuss certain significant problems associated with small-scale hydroelectric development in the Midwestern region, comprised of Illinois, Indiana, Kentucky, Michigan, Ohio, West Virginia, and Wisconsin. The conference opened with an introductory panel of resource persons who outlined the objectives of the conference, presented information on small-scale hydro, and described the materials available to conference participants. A series of workshop sessions followed. Two of the workshop sessions discussed problems and policy responses raised by state and Federal regulation. The remaining two workshops dealt with economic issues confronting small-scale hydro development and the operation and usefulness of the systems dynamics model developed by the Thayer School of Engineering at Dartmouth College. A plenary session and recommendations completed the workshop.

  2. From Lunar Regolith to Fabricated Parts: Technology Developments and the Utilization of Moon Dirt

    Science.gov (United States)

    McLemore, C. A.; Fikes, J. C.; McCarley, K. S.; Good, J. E.; Gilley, S. D.; Kennedy, J. P.

    2008-01-01

    The U.S. Space Exploration Policy has as a cornerstone the establishment of an outpost on the moon. This lunar outpost wil1 eventually provide the necessary planning, technology development, testbed, and training for manned missions in the future beyond the Moon. As part of the overall activity, the National Aeronautics and Space Administration (NASA) is investigating how the in situ resources can be utilized to improve mission success by reducing up-mass, improving safety, reducing risk, and bringing down costs for the overall mission. Marshall Space Flight Center (MSFC), along with other NASA centers, is supporting this endeavor by exploring how lunar regolith can be mined for uses such as construction, life support, propulsion, power, and fabrication. An infrastructure capable of fabrication and nondestructive evaluation will be needed to support habitat structure development and maintenance, tools and mechanical parts fabrication, as well as repair and replacement of space-mission hardware such as life-support items, vehicle components, and crew systems, This infrastructure will utilize the technologies being developed under the In Situ Fabrication and Repair (ISFR) element, which is working in conjunction with the technologies being developed under the In Situ Resources Utilization (ISRU) element, to live off the land. The ISFR Element supports the Space Exploration Initiative by reducing downtime due to failed components; decreasing risk to crew by recovering quickly from degraded operation of equipment; improving system functionality with advanced geometry capabilities; and enhancing mission safety by reducing assembly part counts of original designs where possible. This paper addresses the need and plan for understanding the properties of the lunar regolith to determine the applicability of using this material in a fabrication process. This effort includes the development of high fidelity simulants that will be used in fabrication processes on the ground to

  3. 7th international conference on Nuclear microprobe technology and applications; 7. conference internationale sur la technologie et les applications des microsondes nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    This colloquium gives an up-to-date report on the continuously advancing applications and development of microbeam technology. It presents abstracts and oral contributions in the following domains: microprobes facilities, analysis techniques, imaging techniques, micro-ion beam modification of materials, microelectronics, applications in Material Sciences in Biology in Medicine in earth and planetary Sciences in environment in art in archaeology, alternative techniques. (A.L.B.)

  4. Influence of injector technology on injection and combustion development - Part 1: Hydraulic characterization

    Energy Technology Data Exchange (ETDEWEB)

    Payri, R.; Salvador, F.J.; Gimeno, J.; Morena, J. de la [CMT-Motores Termicos, Universidad Politecnica de Valencia, Camino de Vera s/n, E-46022 (Spain)

    2011-04-15

    An experimental study of two real multi-hole Diesel injectors is performed under current DI Diesel engine operating conditions. The aim of the investigation is to study the influence of injector technology on the flow at the nozzle exit and to analyse its effect on the spray in evaporative conditions and combustion development. The injectors used are two of the most common technologies used nowadays: solenoid and piezoelectric. The nozzles for both injectors are very similar since the objective of the work is the understanding of the influence of the injector technology on spray characteristics for a given nozzle geometry. In the first part of the study, experimental measurements of hydraulic characterization have been analyzed for both systems. Analysis of spray behaviour in evaporative conditions and combustion development will be carried out in the second part of the work. Important differences between both injectors have been observed, especially in their transient opening and closing of the needle, leading to a more efficient air-fuel mixing and combustion processes for the piezoelectric actuated injector. (author)

  5. e-Learning in medical education Guide 32 Part 2: Technology, management and design.

    Science.gov (United States)

    Masters, Ken; Ellaway, Rachel

    2008-06-01

    With e-learning now part of the medical education mainstream, both educational and practical technical and informatics skills have become an essential part of the medical teacher's portfolio. The Guide is intended to help teachers develop their skills in working in the new online educational environments, and to ensure that they appreciate the wider changes and developments that accompany this 'information revolution'. The Guide is divided into two parts, of which this is the second. The first part introduced the basic concepts of e-learning, e-teaching, and e-assessment, the day-to-day issues of e-learning, looking both at theoretical concepts and practical implementation issues. This second part covers topics such as practical knowledge of the forms of technology used in e-learning, the behaviours of teachers and learners in online environments and the design of e-learning content and activities. It also deals with broader concepts of the politics and psychology of e-learning, as well as many of its ethical, legal and economical dimensions, and it ends with a review of emerging forms and directions in e-learning in medical education.

  6. The 15th Conference of Automotive Safety Technology%第15届汽车安全技术学术会议即将召开

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    The 15th Conference of Automotive Safety Technology will be hold in August 22-24, 2012 in Wuhu, Anhui, China, organized by the Vehicle Safety Technology Committee of Society of Automotive Engineers of China, hosted by Chery Automobile Corporation Limited. World renowned experts and scholars from the automotive safety area will attend and discuss automotive safety technologies and applications. Selected papers of the conference will be recommended for publishing in journals.%由中国汽车工程学会汽车安全技术分会主办,奇瑞汽车股份有限公司承办的“第15届汽车安全技术学术会议”定于2012年8月22-24日在安徽芜湖召开。汽车安全技术领域的国内外知名学者、企业人士将出席并就汽车安全技术研究及应用的最新进展展开研讨和推介。会议论文将择优推介到正式刊物上发表。

  7. Managing Returnable Containers Logistics - A Case Study Part II - Improving Visibility through Using Automatic Identification Technologies

    Directory of Open Access Journals (Sweden)

    Gretchen Meiser

    2011-05-01

    Full Text Available This case study is the result of a project conducted on behalf of a company that uses its own returnable containers to transport purchased parts from suppliers. The objective of this project was to develop a proposal to enable the company to more effectively track and manage its returnable containers. The research activities in support of this project included (1 the analysis and documentation of the physical flow and the information flow associated with the containers and (2 the investigation of new technologies to improve the automatic identification and tracking of containers. This paper explains the automatic identification technologies and important criteria for selection. A companion paper details the flow of information and containers within the logistics chain, and it identifies areas for improving the management of the containers.

  8. Cancer modelling in the NGS era - Part I: Emerging technology and initial modelling.

    Science.gov (United States)

    Rovigatti, Ugo

    2015-11-01

    It is today indisputable that great progresses have been made in our molecular understanding of cancer cells, but an effective implementation of such knowledge into dramatic cancer-cures is still belated and yet desperately needed. This review gives a snapshot at where we stand today in this search for cancer understanding and definitive treatments, how far we have progressed and what are the major obstacles we will have to overcome both technologically and for disease modelling. In the first part, promising 3rd/4th Generation Sequencing Technologies will be summarized (particularly IonTorrent and OxfordNanopore technologies). Cancer modelling will be then reviewed from its origin in XIX Century Germany to today's NGS applications for cancer understanding and therapeutic interventions. Developments after Molecular Biology revolution (1953) are discussed as successions of three phases. The first, PH1, labelled "Clonal Outgrowth" (from 1960s to mid 1980s) was characterized by discoveries in cytogenetics (Nowell, Rowley) and viral oncology (Dulbecco, Bishop, Varmus), which demonstrated clonality. Treatments were consequently dominated by a "cytotoxic eradication" strategy with chemotherapeutic agents. In PH2, (from the mid 1980s to our days) the description of cancer as "Gene Networks" led to targeted-gene-therapies (TGTs). TGTs are the focus of Section 3: in view of their apparent failing (Ephemeral Therapies), alternative strategies will be discussed in review part II (particularly cancer immunotherapy, CIT). Additional Pitfalls impinge on the concepts of tumour heterogeneity (inter/intra; ITH). The described pitfalls set the basis for a new phase, PH3, which is called "NGS Era" and will be also discussed with ten emerging cancer models in the Review 2nd part.

  9. Acquisition and Utilization of Japanese Information in Science, Technology and Commerce in Europe and USA : Report on the International Conference on Japanese Information at the University of Warwick

    Science.gov (United States)

    Miyakawa, Takayasu; Miwa, Makiko; Kanda, Toshihiko

    Report on the International Conference on Japanese Information in Science, Technology and Commerce which was organized by the British Library, being supported by NTIS and JICST, at the University of Warwick on 1-4 September 1987. Topics discussed include, US policy on Japanese information, EEC/Japan-Info Project, various private initiatives, language barrier and translation, education of Japanese language and personnel exchange programme, quality and usage of Japanese secondary materials, original document delivery, Japanese produced databases and foreign access to them, requests upon JICST and other Japanese information services.

  10. Round table part 5 : Identification of the key technologies and collaboration for waste management and recycling

    Science.gov (United States)

    Lasseur, Christophe; Tikhomirov, Alexander A.; Wheeler, Raymond

    2016-07-01

    Any manned missions will produce solid waste with or without on board food production. Of course in case of high food production, the percentage of waste of plant origin will be much higher and may pass the 80 %. Consequently the ultimate objective of a closed loop system is not achievable without an efficient waste r4cycling system. Over the years, a large panel of investigations of technologies have been performed form microbial degradation to wet oxidation. These part 5 is aiming to be a platform of discussion on the current world wide investigations related to solid waste treatment and to allow synergies and collaborations.

  11. INFLUENCE OF PROCESS PARAMETERS ON DIMENSIONAL ACCURACY OF PARTS MANUFACTURED USING FUSED DEPOSITION MODELLING TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Filip Górski

    2013-09-01

    Full Text Available The paper presents the results of experimental study – part of research of additive technology using thermoplastics as a build material, namely Fused Deposition Modelling (FDM. Aim of the study was to identify the relation between basic parameter of the FDM process – model orientation during manufacturing – and a dimensional accuracy and repeatability of obtained products. A set of samples was prepared – they were manufactured with variable process parameters and they were measured using 3D scanner. Significant differences in accuracy of products of the same geometry, but manufactured with different set of process parameters were observed.

  12. Solid dispersions in pharmaceutical technology. Part I. Classification and methods to obtain solid dispersions.

    Science.gov (United States)

    Karolewicz, Bozena; Górniak, Agata; Probst, Sandra; Owczarek, Artur; Pluta, Janusz; Zurawska-Płaksej, Ewa

    2012-01-01

    There are many methods to increase solubility of a substance. These include, inter alia, preparation of solid dispersions, i.e. eutectic mixtures, solid solutions, glassy solutions and suspensions. When compared to the individual constituents prior to dispersion formation solid dispersion components are better soluble in water. Therefore, solid solutions became one of the most promising ways to modify solubility, ensuring improved bioavailability and consequently therapeutic efficacy of a substance. In this part of the publication solid dispersions were classified and described in regard to their properties and preparation methods, i.e. melting method, melt evaporation and melt extrusion methods, lyophilisation technique, melt agglomeration process as well as SCF technology and electrospinning.

  13. Research on Application of Cloud Technology to Video Conference System%云技术在视频会议系统中的应用研究

    Institute of Scientific and Technical Information of China (English)

    李粹容; 张何林

    2015-01-01

    针对各行各业对视频会议的重视度和高要求,研究了云技术在视频会议系统中的应用。基于业界先进的云计算理念和虚拟化技术,搭建了一套数据和语音的传输、处理、存储全部由网络资源池、基础设施资源池、计算资源池、存储资源池等资源池处理的视频会议系统。构建通用的、开放的、高效的、高安全性的专业电信级视频会议系统,可以有效地降低业务成本和运营维护成本,提高资源利用率。%According to high attention and requirement of various industries to video conference, the application of cloud technology to video conference system was researched in this paper. Based on industry-leading ideas of cloud computing and virtualization, a video conference system in which the transmission, processing and storage of both data and voice are processed by resource pools of network, infrastructure, computing and storage. To build common, open, efficient, high-security and professional telecom video conference system can effectively reduce costs of service, operation and maintenance, and improve resource utilization.

  14. Student Support for EIPBN 2015 Conference - Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Farrow, Reginald C. [New Jersey Inst. of Technology, Newark, NJ (United States)

    2016-01-19

    The 59th International Conference on Electron, Ion and Photon Beam Technology and Nanofabrication, 2015, held at the Manchester Grand Hyatt in San Diego, CA from May 26 to May 29, 2015 was a great success in large part because financial support allowed robust participation from students. The students gave oral and poster presentations of their research and many will publish peer-reviewed articles in a special conference issue of the Journal of Vacuum Science and Technology B. The Department of Energy Office of Basic Energy Sciences supported 10 students from US universities with a $5,000 grant (DE-SC0013773).

  15. Technology Maturity is Technology Superiority

    Science.gov (United States)

    2008-09-09

    Dominant Air Power: Design For Tomorrow…Deliver Today 2 TECHNOLOGY MATURITY CONFERENCE • ONE DEFINITION OF MATURITY – GOOD JUDGEMENT COMES FROM...EXPERIENCE—EXPERIENCE COMES FROM BAD JUDGEMENT Dominant Air Power: Design For Tomorrow…Deliver Today 3 TECHNOLOGY MATURITY CONFERENCE • THIS WILL BE A...2008 TECHNOLOGY MATURITY CONFERENCETECHNOLOGY MATURITY IS TECHNOLOGY SUPERIORITY” Aeronautical Systems Center Dr. Tom Christian ASC/EN, WPAFB OH

  16. The Human Face of Technological Change. Theme Papers from the Silver Jubilee Conference of the Australian College of Education (25th, Australian Capital Territory, Canberra, May 5-9, 1984).

    Science.gov (United States)

    Randell, Shirley, Ed.

    Papers presented at the 25th annual conference of the Australia College of Education addressed four major themes: The Brave New World of 1984; The Communications Revolution; Being Human in a Technological Age; and Implications of the Technological Society of Education. Papers in this volume include: (1) "The Challenge of Education in the Brave New…

  17. From Blackboard to Green Screen: Teachers, Technology and Turmoil. Proceedings of the Conference of the Townsville Regional Group of the Australian College of Education (8th, Townsville, Queensland, Australia, May 15-16, 1987).

    Science.gov (United States)

    Moon, R., Ed.

    The examination of technological change and its impact on schools that is reported in these conference proceedings focuses on the human dimensions of this change, and in particular, whether the introduction of technology into education is causing turmoil for teachers. It is argued that teachers appear to be feeling the strain of the actual changes…

  18. Attitudes and Technologies--Striving To Match New Electronic Information Products and Services to the Needs and Interests of Elderly People. Report of an Aspen Institute Conference: New Electronic Technologies To Meet the Needs of Elderly People: More Issues and Cases (Queenstown, Maryland, March 23-25, 1988). Communications and Society Forum Report #7.

    Science.gov (United States)

    Tingay, Michael

    Participants in the Aspen Institute Conference considered how communications technologies may be applied to serve the needs and interests of this country's expanding community of retired and older citizens. Conference findings fell into two categories, reflecting questions originating in the human aspirations found in a public opinion survey…

  19. 19th Polish Control Conference

    CERN Document Server

    Kacprzyk, Janusz; Oprzędkiewicz, Krzysztof; Skruch, Paweł

    2017-01-01

    This volume contains the proceedings of the KKA 2017 – the 19th Polish Control Conference, organized by the Department of Automatics and Biomedical Engineering, AGH University of Science and Technology in Kraków, Poland on June 18–21, 2017, under the auspices of the Committee on Automatic Control and Robotics of the Polish Academy of Sciences, and the Commission for Engineering Sciences of the Polish Academy of Arts and Sciences. Part 1 deals with general issues of modeling and control, notably flow modeling and control, sliding mode, predictive, dual, etc. control. In turn, Part 2 focuses on optimization, estimation and prediction for control. Part 3 is concerned with autonomous vehicles, while Part 4 addresses applications. Part 5 discusses computer methods in control, and Part 6 examines fractional order calculus in the modeling and control of dynamic systems. Part 7 focuses on modern robotics. Part 8 deals with modeling and identification, while Part 9 deals with problems related to security, fault ...

  20. State-of-the-art human gene therapy: part I. Gene delivery technologies.

    Science.gov (United States)

    Wang, Dan; Gao, Guangping

    2014-01-01

    Safe and effective gene delivery is a prerequisite for successful gene therapy. In the early age of human gene therapy, setbacks due to problematic gene delivery vehicles plagued the exciting therapeutic outcome. However, gene delivery technologies rapidly evolved ever since. With the advancement of gene delivery techniques, gene therapy clinical trials surged during the past decade. As the first gene therapy product (Glybera) has obtained regulatory approval and reached clinic, human gene therapy finally realized the promise that genes can be medicines. The diverse gene delivery techniques available today have laid the foundation for gene therapy applications in treating a wide range of human diseases. Some of the most urgent unmet medical needs, such as cancer and pandemic infectious diseases, have been tackled by gene therapy strategies with promising results. Furthermore, combining gene transfer with other breakthroughs in biomedical research and novel biotechnologies opened new avenues for gene therapy. Such innovative therapeutic strategies are unthinkable until now, and are expected to be revolutionary. In part I of this review, we introduced recent development of non-viral and viral gene delivery technology platforms. As cell-based gene therapy blossomed, we also summarized the diverse types of cells and vectors employed in ex vivo gene transfer. Finally, challenges in current gene delivery technologies for human use were discussed.

  1. Disaster Management: AN Integral Part of Science & Technology System and Land Administration-Management System

    Science.gov (United States)

    Ghawana, T.; Zlatanova, S.

    2016-06-01

    Disaster management is a multidisciplinary field, which requires a general coordination approach as well as specialist approaches. Science and Technology system of a country allows to create policies and execution of technical inputs required which provide services for the specific types of disasters management. Land administration and management agencies, as the administrative and management bodies, focus more on the coordination of designated tasks to various agencies responsible for their dedicated roles. They get help from Scientific and technical inputs & policies which require to be implemented in a professional manner. The paper provides an example of such integration from India where these two systems complement each other with their dedicated services. Delhi, the Capital of India, has such a disaster management system which has lot of technical departments of government which are mandated to provide their services as Emergency Service Functionaries. Thus, it is shown that disaster management is a job which is an integral part of Science & Technology system of a country while being implemented primarily with the help of land administration and management agencies. It is required that new policies or mandates for the Science and technology organizations of government should give a primary space to disaster management

  2. Physiotherapy Students’ Use of Online Technology as part of their Learning Practices: A Case Study

    Directory of Open Access Journals (Sweden)

    M. Rowe

    2012-12-01

    Full Text Available The relevance of non-technical skills have long been acknowledged asimportant components of clinical learning, and there is evidence that integrating technologycan facilitate their development by encouraging reflection, and by enhancing communicationand reasoning. However, effectively integrating technology into learning practices must takethe contextual needs of students into consideration. The aim of this study was to determinewhat online tools undergraduate physiotherapy students at one South African university arefamiliar with, and how they use them as part of their learning practices.The case study was conducted in a university physiotherapy department in the WesternCape during 2010. A cross-sectional, descriptive design used a survey to obtain quantitativeand qualitative data from participants, and a pilot study was conducted to test the reliability of the instrument. All ethicalconsiderations were adhered to.Seventy six percent of participants had access to the internet at home, and 93% of them belonged to a social network, althoughfewer than half used it for their studying. Few students reported using the internet for more than information retrieval but reportedwanting to use it for enhanced communication with lecturers. Almost all respondents believed that lectures were a useful way tolearn. However, 61% added that integrating online learning activities with lectures could have value.Integrating technology into healthcare education has the potential to develop non-technical skills that are relevant for clinicalpractice. However, this group of students currently lack the experience and insight to use technology effectively as part of theirlearning practices. Educators must take cognisance of the educational and contextual needs of students if they wish to integratetechnology into clinical teaching.

  3. Results from the International Consensus Conference on myo-inositol and D-chiro-inositol in Obstetrics and Gynecology--assisted reproduction technology.

    Science.gov (United States)

    Bevilacqua, Arturo; Carlomagno, Gianfranco; Gerli, Sandro; Montanino Oliva, Mario; Devroey, Paul; Lanzone, Antonio; Soulange, Christophe; Facchinetti, Fabio; Carlo Di Renzo, Gian; Bizzarri, Mariano; Hod, Moshe; Cavalli, Pietro; D'Anna, Rosario; Benvenga, Salvatore; Chiu, Tony T; Kamenov, Zdravko A

    2015-06-01

    A substantial body of research on mammalian gametogenesis and human reproduction has recently investigated the effect of myo-inositol (MyoIns) on oocyte and sperm cell quality, due to its possible application to medically assisted reproduction. With a growing number of both clinical and basic research papers, the meaning of several observations now needs to be interpreted under a solid and rigorous physiological framework. The 2013 Florence International Consensus Conference on Myo- and D-chiro-inositol in obstetrics and gynecology has answered a number of research questions concerning the use of the two stereoisomers in assisted reproductive technologies. Available clinical trials and studies on the physiological and pharmacological effects of these molecules have been surveyed. Specifically, the physiological involvement of MyoIns in oocyte maturation and sperm cell functions has been discussed, providing an answer to the following questions: (1) Are inositols physiologically involved in oocyte maturation? (2) Are inositols involved in the physiology of spermatozoa function? (3) Is treatment with inositols helpful within assisted reproduction technology cycles? (4) Are there any differences in clinical efficacy between MyoIns and D-chiro-inositol? The conclusions of this Conference, drawn depending on expert panel opinions and shared with all the participants, are summarized in this review paper.

  4. RESOURCE-SAVING TECHNOLOGY FOR HIGH-SPEED HOT EXTRUSION OF BIMETALLIC ROD PARTS

    Directory of Open Access Journals (Sweden)

    I. V. Kachanov

    2016-01-01

    Full Text Available Processes of high-speed shaping changes and especially high-speed hot extrusion create efficient conditions for treatment of weakly plastic and poorly deformable materials which are widely used in tool making facilities. Due to the fact that high-speed stamping provides accurate billets with increased mechanical properties, it can be used as a technological process for manufacturing rod parts of die tooling operating under conditions of increased loads and wear. The purpose of the given paper is to carry out experimental investigations on the possibility to obtain a bimetallic rod tool where structural steel is considered as a basis of the tool and a working cavity is made of high-alloyed tool steel with its saving up to 90 %. A scheme of loading and geometry of conjugated surfaces of the composite billet have been developed in the paper. Technology for obtaining bimetallic rod parts of die tooling with deformation at speed of vд = 70–80 m/s and composite billet temperature of Т = (1150±20 ºС has been experimentally tested with formation of a compound due to plastic flow of two billet parts on contact surface with removal of surface oxide films. Microstructures of the bimetallic compounds obtained with the help of high-speed hot extrusion method for compositions of structural and high-alloy steels have been investigated and their high quality has been proved during the investigations. Dependences of micro-hardness distribution have been established outbound two steel contact plane in the zone of connection that are characterized by a minimum micro-hardness value in the connection joint. Availability of more plastic zone in the contact plane contributes to reduction of residual stresses due to their relaxation in this zone and higher joint strength.

  5. Information technology in chemistry research and education: Part I. Ab initio studies on the hydrolysis of aromatic diazonium ions. Part II. Theoretical study and molecular modeling of non-covalent interactions. Part III. Applying information technology in chemistry education

    Science.gov (United States)

    Wu, Zhengyu

    Part I of this dissertation studies the bonding in chemical reactions, while Part II studies the bonding related to inter- and intra-molecular interactions. Part III studies the application of IT technology in chemistry education. Part I of this dissertation (chapter 1 and chapter 2) focuses on the theoretical studies on the mechanism of the hydrolysis reactions of benzenediazonium ion and guaninediazonium ion. The major conclusion is that in hydrolysis reactions the "unimolecular mechanism" actually has to involve the reacting solvent molecule. Therefore, the unimolecular pathway can only serve as a conceptual model but will not happen in the reality. Chapter I concludes that the hydrolysis reaction of benzenediazonium ion takes the direct SN2Ar mechanism via a transition state but without going through a pre-coordination complex. Chapter 2 concludes that the formation of xanthine from the dediazoniation reaction of guaninediazonium ion in water takes the SN2Ar pathway without a transition state. And oxanine might come from an intermediate formed by the bimolecular deprotonation of the H atom on N3 of guaninediazonium ion synchronized with the pyrimidine ring opening reaction. Part II of this dissertation includes chapters 3, 4, and 5. Chapter 3 studies the quadrupole moment of benzene and quadrupole-quadrupole interactions. We concluded that the quadrupole-quadrupole interaction is important in the arene-arene interactions. Our study shows the most stable structure of benzene dimer is the point-to-face T-shaped structure. Chapter 4 studies the intermolecular interactions that result in the disorder of the crystal of 4-Chloroacetophenone-(4-methoxyphenylethylidene). We analyzed all the nearest neighbor interactions within that crystal and found that the crystal structure is determined by its thermo-dynamical properties. Our calculation perfectly reproduced the percentage of parallel-alignment of the crystal. Part III of this dissertation is focused on the

  6. A Study of Future Communications Concepts and Technologies for the National Airspace System-Part III

    Science.gov (United States)

    Ponchak, Denise S.; Apaza, Rafael D.; Wichgersm Joel M.; Haynes, Brian; Roy, Aloke

    2014-01-01

    The National Aeronautics and Space Administration (NASA) Glenn Research Center (GRC) is investigating current and anticipated wireless communications concepts and technologies that the National Airspace System (NAS) may need in the next 50 years. NASA has awarded three NASA Research Announcements (NAR) studies with the objective to determine the most promising candidate technologies for air-to-air and air-to-ground data exchange and analyze their suitability in a post-NextGen NAS environment. This paper will present progress made in the studies and describe the communications challenges and opportunities that have been identified as part of the study. NASA's NextGen Concepts and Technology Development (CTD) Project integrates solutions for a safe, efficient and high-capacity airspace system through joint research efforts and partnerships with other government agencies. The CTD Project is one of two within NASA's Airspace Systems Program and is managed by the NASA Ames Research Center. Research within the CTD Project is in support the 2011 NASA Strategic Plan Sub-Goal 4.1: Develop innovative solutions and advanced technologies, through a balanced research portfolio, to improve current and future air transportation. The focus of CTD is on developing capabilities in traffic flow management, dynamic airspace configuration, separation assurance, super density operations and airport surface operations. Important to its research is the development of human/automation information requirements and decisionmaking guidelines for human-human and human-machine airportal decision-making. Airborne separation, oceanic intrail climb/descent and interval management applications depend on location and intent information of surrounding aircraft. ADS-B has been proposed to provide the information exchange, but other candidates such as satellite-based receivers, broadband or airborne internet, and cellular communications are possible candidate's.

  7. Editorial: Advanced Learning Technologies, Performance Technologies, Open Contents, and Standards - Some Papers from the Best Papers of the Conference ICCE C3 2009

    Directory of Open Access Journals (Sweden)

    Fanny Klett (IEEE Fellow

    2010-09-01

    Full Text Available This special issue deals with several cutting edge research outcomes from recent advancement of learning technologies. Advanced learning technologies are the composition of various related technologies and concepts such as i internet technologies and mobile technologies, ii human and organizational performance/knowledge management, and iii underlying trends toward open technology, open content and open education. This editorial note describes the overview of these topics related to the advanced learning technologies to provide the common framework for the accepted papers in this special issue.

  8. Capsicum production, technology, chemistry, and quality. Part 1: History, botany, cultivation, and primary processing.

    Science.gov (United States)

    Govindarajan, V S

    1985-01-01

    The genus Capsicum (Fam. Solanaceae) was known to ancient cultures and was more recently historically associated with the discovery of the New World. This genus provides many species and varieties used in flavoring foods popular in the cuisines of many parts of the world. From the pungent chilli to the colorful paprika and the bell pepper, with its remarkable aroma, the genus is of great interest for its chemistry, sensory attributes, and physiological action. The Capsicums, among the spices, are second only to black pepper in trade both in volume and value. The production of the different pungency forms, the processed seasonings, and the concentrated oleoresins, through technologically advanced processes and in specified standard grades, are critically reviewed. The pungency of Capsicum fruits, its evaluation, chemical structure relationship, its increasing acceptance and preference by a variety of populations are of great research interest. The wide traditional use in the growing regions and its intense physiological effects have attracted the attention of researchers of many different disciplines. These aspects are reviewed in four sequential parts. Part I deals with history, botany, cultivation, and primary processing.

  9. Sustainable energy for a resilient future: proceedings of the 14th International Conference on Sustainable Energy Technologies

    OpenAIRE

    Rodrigues, Lucélia Taranto

    2016-01-01

    Volume I, 898 pages, ISBN 9780853583134 Energy Technologies & Renewables Session 1: Biofuels & Biomass Session 5: Building Energy Systems Session 9: Low-carbon/ Low-energy Technologies Session 13: Biomass Systems Session 16: Solar Energy Session 17: Biomass & Biofuels Session 20: Solar Energy Session 21: Solar Energy Session 22: Solar Energy Session 25: Building Energy Technologies Session 26: Solar Energy Session 29: Low-carbon/ Low-energy Technologies ...

  10. PREFACE: 11th Asia-Pacific Conference on Plasma Science and Technology (APCPST-11) and 25th Symposium on Plasma Science for Materials (SPSM-25)

    Science.gov (United States)

    Watanabe, Takayuki; Kaneko, Toshio; Sekine, Makoto; Tanaka, Yasunori

    2013-06-01

    The 11th Asia-Pacific Conference on Plasma Science and Technology (APCPST-11) was held in Kyoto, Japan on 2-5 October 2012 with the 25th Symposium on Plasma Science for Materials (SPSM-25). SPSM has been held annually since 1988 under the sponsorship of The 153rd Committee on Plasma Materials Science, Japan Society for the Promotion of Science (JSPS). This symposium is one of the major activities of the Committee, which is organized by researchers in academia and industry for the purpose of advancing intersectional scientific information exchange and discussion of science and technology of plasma materials processing. APCPST and SPSM are jointly held biennially to survey the current status of low temperature and thermal plasma physics and chemistry for industrial applications. The whole area of plasma processing was covered from fundamentals to applications. Previous meetings were held in China, Japan, Korea, and Australia, attended by scientists from the Asia-Pacific and other countries. The joint conference was organized in plenary lectures, invited, contributed oral presentations and poster sessions. At this meeting, we had 386 participants from 10 countries and 398 presentations, including 26 invited presentations. This year, we arranged special topical sessions that covered green innovation, life innovation, and technical reports from industry. This conference seeks to bring the plasma community together and to create a forum for discussing the latest developments and issues, the challenges ahead in the field of plasma research and applications among engineers and scientists in Asia, the Pacific Rim, as well as Europe. This volume presents 44 papers that were selected via a strict peer-review process from full papers submitted for the proceedings of the conference. The topics range from the basic physics and chemistry of plasma processing to a broad variety of materials processing and environmental applications. This volume offers an overview of recent

  11. Citrus fruits--varieties, chemistry, technology, and quality evaluation. Part II. Chemistry, technology, and quality evaluation. A. Chemistry.

    Science.gov (United States)

    Ranganna, S; Govindarajan, V S; Ramana, K V

    1983-01-01

    In Part 2 of this review on citrus fruits, the literature on chemistry, technology, and quality evaluation are critically considered. Sweet oranges, mandarin, grapefruit, lemon, and lime are generally used for processing. The literature on chemical components of citrus fruit which include sugars, polysaccharides, oraganic acids, nitrogenous constituents and lipids; carotenoids which contribute to color; vitamins and minerals, and flavonoids; limonoids, some of which impart bitterness to the juice; and the volatile components which contribute to aroma have been reviewed. Chilled and pasteurized juices, juice concentrates, and beverages are the important products manufactured commercially, and to a limited extent powdered citrus juices, canned segments, and marmalades. The literature on the manufacture of these products also as new types of juice and oil extractors; TASTE and other types of evaporators; tank farms to store juice and concentrate in bulk; aseptic filling in bulk containers and retail packs; alternate flexible and rigid containers other than glass and tin; and recovery of volatile flavoring constituents during juice processing are some of the important technological developments in the recent past and have been discussed. Bitterness in citrus juices and its control, composition of cloud, and its stability and changes during storage have been reviewed. Essential oils, pectin, frozen and dried juice sacs, dried pulp and molasses, flavonoids, seed oil, and meal are the important byproducts, the manufacture of which is given in essential details. Generally, consumers judge the product on the basis of its sensory attributes. The quality of finished product is dependent upon the raw materials used and control of processes. The U.S. Department of Agriculture (USDA) standards for different products, physicochemical and microbiological parameters prescribed as indices of quality of fruit, juice, concentrate, and other products; composition of essential oils; and

  12. Trends in Energy Management Technology - Part 3: State of Practiceof Energy Management, Control, and Information Systems

    Energy Technology Data Exchange (ETDEWEB)

    Yee, Gaymond; Webster, Tom

    2004-02-01

    In this report, the third in a series, we provide an evaluation of several products that exemplify the current state of practice of Energy Management, Control, and Information Systems (EMCIS). The available features for these products are summarized and analyzed with regard to emerging trends in EMCIS and potential benefits to the federal sector. The first report [1] covered enabling technologies for emerging energy management systems. The second report [2] serves as a basic reference for building control system (BCS) networking fundamentals and includes an assessment of current approaches to open communications. Part 4 of this series will discuss applications software from a user's perspective. It is important for energy managers in the Federal sector to have a high level of knowledge and understanding of these complex energy management systems. This series of reports provides energy practitioners with some basic informational and educational tools to help make decisions relative to energy management systems design, specification, procurement, and energy savings potential.

  13. Handbook on Special Works. Technological Lines of Industrial Enterprises. Part 1,

    Science.gov (United States)

    1979-10-16

    602 Chapter XI. Materials for Manufacture and Assembly of Technological Conduits ..................................... 643 Chapter XII ...4.49 -1,Ox2nn~ N157 I 62 Ij 20M 11.2 .A4 X 2 𔃺 21 I 47 358 258 7.00 3,5n_ ,_ 1.11 3 308 5.39 45’)XS) .147 I 48 I2)16.25 *~ XII I 263 I 5 I 1 310 13.16 4...Page 293. Tabla 24. Enumeration of tua Szaudrdized parts of conduits/aanifolds from brass on Ppw-S and 200 xg/£aa. iNU M M . sA . .. ., , AWtl M ll

  14. Generational influences in academic emergency medicine: teaching and learning, mentoring, and technology (part I).

    Science.gov (United States)

    Mohr, Nicholas M; Moreno-Walton, Lisa; Mills, Angela M; Brunett, Patrick H; Promes, Susan B

    2011-02-01

    For the first time in history, four generations are working together-traditionalists, baby boomers, generation Xers (Gen Xers), and millennials. Members of each generation carry with them a unique perspective of the world and interact differently with those around them. Through a review of the literature and consensus by modified Delphi methodology of the Society for Academic Emergency Medicine Aging and Generational Issues Task Force, the authors have developed this two-part series to address generational issues present in academic emergency medicine (EM). Understanding generational characteristics and mitigating strategies can help address some common issues encountered in academic EM. Through recognition of the unique characteristics of each of the generations with respect to teaching and learning, mentoring, and technology, academicians have the opportunity to strategically optimize interactions with one another.

  15. Generational Influences in Academic Emergency Medicine: Teaching and Learning, Mentoring, and Technology (Part I)

    Science.gov (United States)

    Mohr, Nicholas M.; Moreno-Walton, Lisa; Mills, Angela M.; Brunett, Patrick H.; Promes, Susan B.

    2010-01-01

    For the first time in history, four generations are working together – Traditionalists, Baby Boomers, Generation Xers, and Millennials. Members of each generation carry with them a unique perspective of the world and interact differently with those around them. Through a review of the literature and consensus by modified Delphi methodology of the Society for Academic Emergency Medicine (SAEM) Aging and Generational Issues Task Force, the authors have developed this two-part series to address generational issues present in academic emergency medicine (EM). Understanding generational characteristics and mitigating strategies can help address some common issues encountered in academic EM. Through recognition of the unique characteristics of each of the generations with respect to teaching and learning, mentoring, and technology, academicians have the opportunity to strategically optimize interactions with one another. PMID:21314779

  16. 15 CFR Supplement No. 1 to Part 734 - Questions and Answers-Technology and Software Subject to the EAR

    Science.gov (United States)

    2010-01-01

    ... Software Subject to the EAR No. Supplement No. 1 to Part 734 Commerce and Foreign Trade Regulations... Supplement No. 1 to Part 734—Questions and Answers—Technology and Software Subject to the EAR This Supplement... to the EAR. It is intended to give the public guidance in understanding how BIS interprets this...

  17. 5th European Rheology Conference

    CERN Document Server

    1998-01-01

    Global sustainable development of the world economy requires better understanding and utilization of natural recourses. In this endeavor rheology has an indispensable role. The Rheology Conferences are therefore always an important event for science and technology. The Fifth European Rheology Conference, held from September 6 to 11 in the Portoro-z, Slovenia, will be the first AlI-European rheology meeting after the formal constitution of the European Society ofRheology. As such it will be a special historical event. At this meeting the European Society of Rheology will introduce the Weissenberg Medal, to be bestowed every four years to an individual for hislhers contribution to the field of Rheology. The recipient ofthe first award will be professor G. Marrucci ofthe Universita degli Studi di Napoli, Italy. Two mini Symposia will be part of the Conference. The first, on Industrial Rheology, will commemorate the late professor G. Astarita. The second will honor the eightieth birthday of professor N.W. Tschoeg...

  18. Evaluating Colombian SMEs’ technological innovation: Part 1: conceptual basis, evaluation methodology and characterisation of innovative companies

    Directory of Open Access Journals (Sweden)

    Óscar Fernando Castellanos Domínguez

    2010-04-01

    Full Text Available Innovative processes currently constitute one of the most important alternatives for increasing organisations’ levels of competitiveness and productivity. The Colombian state (being conscious of this has generated mechanisms aimed at encouraging technological and innovative development activities in SMEs, as was the case with the Colombian Prize for Entrepreneurial Technological Innovation for SME (Innova 2006. The experience acquired through the technical evaluation of such prize was a valuable element for identifying Colombian MSMSC innovative characteristics and trends. The present article seeks to establish the current state of innovation in SMEs from expe- rience gained when evaluating and awarding the Innova prize; a frame of reference concerning innovation and design, the methodology used for evaluating the prize and some general statistics regarding the results obtained in 2006 are thus presented. A future publication will give the factors influencing innovation taking geographical regions, sectors and impact as reference. Such results revealed innovative initiatives in strategic sectors such as computer science and services, the leadership of cities such as Bogota and MedellIn and the need for producing clear guidelines for incorporating process and product design into being part of the innovative process.

  19. Structural properties of H13 tool steel parts produced with use of selective laser melting technology

    Science.gov (United States)

    Šafka, J.; Ackermann, M.; Voleský, L.

    2016-04-01

    This paper deals with establishing of building parameters for 1.2344 (H13) tool steel processed using Selective Laser Melting (SLM) technology with layer thickness of 50 µm. In the first part of the work, testing matrix of models in the form of a cube with chamfered edge were built under various building parameters such as laser scanning speed and laser power. Resulting models were subjected to set of tests including measurement of surface roughness, inspection of inner structure with aid of Light Optical Microscopy and Scanning Electron Microscopy and evaluation of micro-hardness. These tests helped us to evaluate an influence of changes in building strategy to the properties of the resulting model. In the second part of the work, mechanical properties of the H13 steel were examined. For this purpose, the set of samples in the form of “dog bone” were printed under three different alignments towards the building plate and tested on universal testing machine. Mechanical testing of the samples should then reveal if the different orientation and thus different layering of the material somehow influence its mechanical properties. For this type of material, the producer provides the parameters for layer thickness of 30 µm only. Thus, our 50 µm building strategy brings shortening of the building time which is valuable especially for large models. Results of mechanical tests show slight variation in mechanical properties for various alignment of the sample.

  20. Steel fiber reinforced concrete pipes: part 1: technological analysis of the mechanical behavior

    Directory of Open Access Journals (Sweden)

    A. D. de Figueiredo

    Full Text Available This paper is the first part of an extensive work focusing the technological development of steel fiber reinforced concrete pipes (FRCP. Here is presented and discussed the experimental campaign focusing the test procedure and the mechanical behavior obtained for each of the dosages of fiber used. In the second part ("Steel fiber reinforced concrete pipes. Part 2: Numerical model to simulate the crushing test", the aspects of FRCP numerical modeling are presented and analyzed using the same experimental results in order to be validated. This study was carried out trying to reduce some uncertainties related to FRCP performance and provide a better condition to the use of these components. In this respect, an experimental study was carried out using sewage concrete pipes in full scale as specimens. The diameter of the specimens was 600 mm, and they had a length of 2500 mm. The pipes were reinforced with traditional bars and different contents of steel fibers in order to compare their performance through the crushing test. Two test procedures were used in that sense. In the 1st Series, the diameter displacement was monitored by the use of two LVDTs positioned at both extremities of the pipes. In the 2nd Series, just one LVDT is positioned at the spigot. The results shown a more rigidity response of the pipe during tests when the displacements were measured at the enlarged section of the socket. The fiber reinforcement was very effective, especially when low level of displacement was imposed to the FRCP. At this condition, the steel fibers showed an equivalent performance to superior class pipes made with traditional reinforced. The fiber content of 40 kg/m3 provided a hardening behavior for the FRCP, and could be considered as equivalent to the critical volume in this condition.

  1. 14th International Cryocooler Conference

    CERN Document Server

    Ross, Ronald G

    2007-01-01

    This is the 14th volume in the conference series. Over the years the International Cryocoolers Conference has become the preeminent worldwide conference for the presentation of the latest developments and test experiences with cryocoolers. The typical applications of this technology include cooling space and terrestrial infrared focal plane arrays, space x-ray detectors, medical applications, and a growing number of high-temperature superconductor applications.

  2. 15th International Cryocooler Conference

    CERN Document Server

    Ross, Ronald G

    2009-01-01

    This is the 15th volume in the conference series. Over the years the International Cryocooler Conference has become the preeminent worldwide conference for the presentation of the latest developments and test experiences with cryocoolers. The typical applications of this technology include cooling space and terrestrial infrared focal plane arrays, space x-ray detectors, medical applications, and a growing number of high-temperature superconductor applications.

  3. Competitive policies in the Nordic energy research and innovation area - eNERGIA : Part 2: Technology reports

    Energy Technology Data Exchange (ETDEWEB)

    Klitkou, Antje; Pedersen, Trond Einar; Scordato, Lisa; Mariussen, Aage

    2008-07-01

    This (Part 2: Technology reports) is the second report about the results from the eNERGIA project. The first report deals with the countries covered by the eNERGIA project, while the third report sums up the SWOT-analysis, the eNERGIA workshops and the case studies of good practice. A short synthesis report summarises the entire project. This second report mainly deals with selected renewable energy technologies from different perspectives. The report comprises the following nine chapters. Chapter 1 is the presentation of the selected renewable technologies (solar photovoltaic technology, wind technology, 2nd generation bio-energy technology, wave technology and hydroelectric technology) and a subsequent elaboration of the status of the technologies in the Nordic and Baltic countries. Chapter 2 gives an overview of patterns of international R&D collaboration as seen from the countries in question. Chapter 3 draws on technology specific patenting data and bibliometric data, describing the level of technology specific activity in each country. Chapter 4 and 5 describe the status of renewable energy production and renewable energy research respectively in each country. The four last chapters are relatively brief descriptions of the situation in the Nordic and Baltic countries. Chapter 6 gives an overview of the venture capital situation. Chapter 7 is about market regulations and Chapter 8 is about social concerns. Finally, Chapter 9 addresses infrastructural challenges. (Author) 77 figs., 70 tabs

  4. Waste management technologies for the next millenium. Technical conference; Mit MBA-Technik ins naechste Jahrtausend. Fachtagung

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    Waste management on a federal and Laender level requires reorientation and new decisions in ever shorter intervals. In view of the fact that projecting phases are long and investment costs amount to tens of millions, communal decision-makers must constantly modify their current projects in order to optimise them. The papers in this conference report present theoretical information as well as practical experience in waste treatment plant operation. [German] Die abfallwirtschaftlichen Entwicklungen auf Bundes- und Landesebene erfordern in immer kuerzer werdenden Abstaenden neue Ueberlegungen und Weichenstellungen. Angesichts langer Planungszeitraeume und hoher Investitionskosten im zweistelligen Millionenbereich sind die Entscheidungstraeger auf kommunaler Ebene immer wieder gefordert auf Grundlage aktueller Erkenntnisse bisherige Planungen zu ueberdenken sowie anstehende Projekte zu modifizieren und zu optimieren. Die Vortraege in diesem Tagungsband weisen nicht nur theoretische Ansaetze auf, sondern beinhalten auch praktische Erfahrungen aus verschiedenen Abfallbehandlungsanlagen. (orig./SR)

  5. Advanced Technology in Teaching : Proceedings of the 2009 3rd International Conference on Teaching and Computational Science, v.1

    CERN Document Server

    Intelligent Ubiquitous Computing and Education

    2012-01-01

    The volume includes a set of selected papers extended and revised from the International Conference on Teaching and Computational Science (WTCS 2009) held on December 19- 20, 2009, Shenzhen, China.   WTCS 2009 best papers Volume 1 is to provide a forum for researchers, educators, engineers, and government officials involved in the general areas of Intelligent Ubiquitous Computing and Education to disseminate their latest research results and exchange views on the future research directions of these fields. 128 high-quality papers are included in the volume. Each paper has been peer-reviewed by at least 2 program committee members and selected by the volume editor Prof.Wu.   On behalf of the WTCS 2009, we would like to express our sincere appreciation to all of authors and referees for their efforts reviewing the papers. Hoping you can find lots of profound research ideas and results on the related fields of Intelligent Ubiquitous Computing and Education.

  6. Advanced Technology in Teaching : Proceedings of the 2009 3rd International Conference on Teaching and Computational Science, v.2

    CERN Document Server

    Education, Psychology and Computer Science

    2012-01-01

    The volume includes a set of selected papers extended and revised from the International Conference on Teaching and Computational Science (WTCS 2009) held on December 19- 20, 2009, Shenzhen, China.   WTCS 2009 best papers Volume 2 is to provide a forum for researchers, educators, engineers, and government officials involved in the general areas of Education, Psychology and Computer Science to disseminate their latest research results and exchange views on the future research directions of these fields. 128 high-quality papers are included in the volume. Each paper has been peer-reviewed by at least 2 program committee members and selected by the volume editor Prof. Wu.   On behalf of the WTCS 2009, we would like to express our sincere appreciation to all of authors and referees for their efforts reviewing the papers. Hoping you can find lots of profound research ideas and results on the related fields of Education, Psychology and Computer Science. 

  7. Future Jet Technologies. Part B. F-35 Future Risks v. JS-Education of Pilots & Engineers

    Science.gov (United States)

    Gal-Or, Benjamin

    2011-09-01

    Design of “Next-Generation” airframes based on supermarket-jet-engine-components is nowadays passé. A novel integration methodology [Gal-Or, “Editorial-Review, Part A”, 2011, Gal-Or, “Vectored Propulsion, Supermaneuverability and Robot Aircraft”, Springer Verlag, Gal-Or, Int'l. J. of Thermal and Fluid Sciences 7: 1-6, 1998, “Introduction”, 2011] is nowadays in. For advanced fighter aircraft it begins with JS-based powerplant, which takes up to three times longer to mature vis-à-vis the airframe, unless “committee's design” enforces a dormant catastrophe. Jet Steering (JS) or Thrust Vectoring Flight Control, is a classified, integrated engine-airframe technology aimed at maximizing post-stall-maneuverability, flight safety, efficiency and flight envelopes of manned and unmanned air vehicles, especially in the “impossible-to-fly”, post-stall flight domains where the 100+ years old, stall-spin-limited, Conventional Flight Control fails. Worldwide success in adopting the post-stall, JS-revolution, opens a new era in aviation, with unprecedented design variables identified here for a critical review of F-35 future risks v. future fleets of jet-steered, pilotless vehicles, like the X-47B/C. From the educational point of view, it is also instructive to comprehend the causes of long, intensive opposition to adopt post-stall, JS ideas. A review of such debates may also curb a future opposition to adopt more advanced, JS-based technologies, tests, strategies, tactics and missions within the evolving air, marine and land applications of JS. Most important, re-education of pilots and engineers requires adding post-stall, JS-based studies to curriculum & R&D.

  8. International conference on string theory

    CERN Document Server

    2017-01-01

    The Strings 2017 conference is part of the "Strings" series of annual conferences, that bring the entire string theory community together. It will include reviews of major developments in the field, and specialized talks on specific topics. There will also be several public lectures given by conference participants, a pre-Strings school at the Technion, and a post-Strings workshop at the Weizmann Institute.

  9. Nostradamus conference

    CERN Document Server

    Rössler, Otto; Snášel, Václav; Abraham, Ajith; Corchado, Emilio; Nostradamus: Modern Methods of Prediction, Modeling and Analysis of Nonlinear Systems

    2013-01-01

    This proceeding book of Nostradamus conference (http://nostradamus-conference.org) contains accepted papers presented at this event in 2012. Nostradamus conference was held in the one of the biggest and historic city of Ostrava (the Czech Republic, http://www.ostrava.cz/en), in September 2012. Conference topics are focused on classical as well as modern methods for prediction of dynamical systems with applications in science, engineering and economy. Topics are (but not limited to): prediction by classical and novel methods, predictive control, deterministic chaos and its control, complex systems, modelling and prediction of its dynamics and much more.

  10. Aerospace technology and commercial nuclear power; Proceedings of the Workshop Conference, Williamsburg, VA, November 18-20, 1981

    Science.gov (United States)

    Grey, J.

    An attempt has been made to compare the technologies, institutions and procedures of the aerospace and commercial nuclear power industries, in order to characterize similarities and contrasts as well as to identify the most fruitful means by which to transfer information, technology, and procedures between the two industries. The seven working groups involved in this study took as their topics powerplant design formulation and effectiveness, plant safety and operations, powerplant control technology and integration, economic and financial analyses, public relations, and the management of nuclear waste and spent fuel. Consequential differences are noted between the two industries in matters of certification and licencing procedures, assignment of responsibility for both safety and financial performance, and public viewpoint. Areas for beneficial interaction include systems management and control and safety system technology. No individual items are abstracted in this volume

  11. Round table part 4: Identification of the key technologies and collaboration for Food production and preparation

    Science.gov (United States)

    Lasseur, Christophe; Tikhomirov, Alexander A.; Wheeler, Raymond

    2016-07-01

    Although the two first metabolic needs are based on simple molecule (i.e. oxygen and water), the third metabolic needs considered a tremendously large number and diversity of molecules: food. Today, physical chemical technologies do not allow to synthetize all the spectrum of molecules and biological processes have to be considered. Moreover, the raw material products by plants or by microorganisms are generally not directly edible or palatable and would need either transformation, assembly and/or storage. In other words the challenges of the food cannot be reduced to the plant production but need to include as well the complete chain, from the production conditions and the biomass quality up to the final edible products and its acceptance. In other words all the steps have to be considered and characterize. Today these challenges requires a high level of plants characterization. This round table part 4 would allow the participants to present some of their results and express some domain of activities. Re4serach for collaboration will be identified.

  12. 17th International Cryocooler Conference

    CERN Document Server

    Ross, Ronald G

    2012-01-01

    Cryocoolers 17 archives developments and performance measurements in the field of cryocoolers based on the contributions of leading international experts at the 17th International Cryocooler Conference that was held in Los Angeles, California, on July 9-12, 2012. The program of this conference consisted of 94 papers; of these, 71 are published here. Over the years the International Cryocoolers Conference has become the preeminent worldwide conference for the presentation of the latest developments and test experiences with cryocoolers. The typical applications of this technology include cooling space and terrestrial infrared focal plane arrays, space x-ray detectors, medical applications, and a growing number of high-temperature superconductor applications.

  13. 16th International Cryocooler Conference

    CERN Document Server

    Ross, Ronald G

    2011-01-01

    Cryocoolers 16 archives developments and performance measurements in the field of cryocoolers based on the contributions of leading international experts at the 16th International Cryocooler Conference that was held in Atlanta, Georgia, on May 17-20, 2010. The program of this conference consisted of 116 papers; of these, 89 are published here. Over the years the International Cryocoolers Conference has become the preeminent worldwide conference for the presentation of the latest developments and test experiences with cryocoolers. The typical applications of this technology include cooling space and terrestrial infrared focal plane arrays, space x-ray detectors, medical applications, and a growing number of high-temperature superconductor applications.

  14. Metabolic Engineering X Conference

    Energy Technology Data Exchange (ETDEWEB)

    Flach, Evan [American Institute of Chemical Engineers

    2015-05-07

    The International Metabolic Engineering Society (IMES) and the Society for Biological Engineering (SBE), both technological communities of the American Institute of Chemical Engineers (AIChE), hosted the Metabolic Engineering X Conference (ME-X) on June 15-19, 2014 at the Westin Bayshore in Vancouver, British Columbia. It attracted 395 metabolic engineers from academia, industry and government from around the globe.

  15. Nineteenth annual actinide separations conference: Conference program and abstracts

    Energy Technology Data Exchange (ETDEWEB)

    Bronson, M. [ed.

    1995-12-31

    This report contains the abstracts from the conference presentations. Sessions were divided into the following topics: Waste treatment; Spent fuel treatment; Issues and responses to Defense Nuclear Facility Safety Board 94-1; Pyrochemical technologies; Disposition technologies; and Aqueous separation technologies.

  16. Conference “Computational Analysis and Optimization” (CAO 2011)

    CERN Document Server

    Tiihonen, Timo; Tuovinen, Tero; Numerical Methods for Differential Equations, Optimization, and Technological Problems : Dedicated to Professor P. Neittaanmäki on His 60th Birthday

    2013-01-01

    This book contains the results in numerical analysis and optimization presented at the ECCOMAS thematic conference “Computational Analysis and Optimization” (CAO 2011) held in Jyväskylä, Finland, June 9–11, 2011. Both the conference and this volume are dedicated to Professor Pekka Neittaanmäki on the occasion of his sixtieth birthday. It consists of five parts that are closely related to his scientific activities and interests: Numerical Methods for Nonlinear Problems; Reliable Methods for Computer Simulation; Analysis of Noised and Uncertain Data; Optimization Methods; Mathematical Models Generated by Modern Technological Problems. The book also includes a short biography of Professor Neittaanmäki.

  17. Consensus conferences

    DEFF Research Database (Denmark)

    Nielsen, Annika Porsborg; Lassen, Jesper

    Our results point to significant national variation both in terms of the perceived aim of consensus conferences, expectations to conference outcomes, conceptions of the roles of lay people and experts, and in terms of the way in which the role of public deliberation is interpreted. Interestingly...

  18. National Hospitality Conference 2016: a Report

    OpenAIRE

    Murphy, James Peter

    2015-01-01

    The 2015 National Hospitality Conference took place recently at the Intercontinental Hotel, Ballsbridge, Dublin. The main theme of the 2015 conference was ‘Challenges and Opportunities’ , DIT Bar Studies students from the School of Culinary Arts & Food Technology joined delegates in debating and discussing the significant issues surrounding the conference theme. This report highlights the issues discussed.

  19. National Hospitality Conference 2014: a Report

    OpenAIRE

    Murphy, James Peter

    2014-01-01

    The 2014 National Hospitality Conference took place on November 3rd and was held at the Four Seasons Hotel, Ballsbridge, Dublin. The main theme of this year’s conference was ‘Preparing for growth’ , DIT Bar Studies students from the School of Culinary Arts & Food Technology joined delegates in debating and discussing the significant issues surrounding the conference theme.

  20. Advanced technology optical telescopes IV; Proceedings of the Meeting, Tucson, AZ, Feb. 12-16, 1990. Parts 1 & 2

    Science.gov (United States)

    Barr, Lawrence D. (Editor)

    1990-01-01

    The present conference on the current status of large, advanced-technology optical telescope development and construction projects discusses topics on such factors as their novel optical system designs, the use of phased arrays, seeing and site performance factors, mirror fabrication and testing, pointing and tracking techniques, mirror thermal control, structural design strategies, mirror supports and coatings, and the control of segmented mirrors. Attention is given to the proposed implementation of the VLT Interferometer, the first diffraction-limited astronomical images with adaptive optics, a fiber-optic telescope using a large cross-section image-transmitting bundle, the design of wide-field arrays, Hartmann test data reductions, liquid mirrors, inertial drives for telescope pointing, temperature control of large honeycomb mirrors, evaporative coatings for very large telescope mirrors, and the W. M. Keck telescope's primary mirror active control system software.

  1. The Analysis of the Available Technology of Exploiting and Applying Biohydrocarbons for Fuel Production Part I

    Directory of Open Access Journals (Sweden)

    Gielo-Klepacz Halina

    2017-08-01

    Full Text Available The article shows the current state of knowledge in the area of applying biohydrocarbons for fuel production, especially in aeronautical applications and to power compression-ignition engines. The technologies based on biochemical and thermal/chemical conversion of biomass are described. Technological potential of these technologies is evaluated. The article is based on the literature review.

  2. Transforming Science and Technology: Our Future Depends on It. Volume 1 [and] Volume 2: Proceedings and Contributions to the International Gender and Science and Technology Conference (7th, Waterloo, Ontario, Canada, July 31-August 5, 1993) = Transformer les sciences et la technologie: notre avenir en depend. Volume 1 [and] Volume 2. Les soumissions a la septieme conference internationale sur l'equite des sexes en science et en technologie (du 31 juillet au 5 aout 1993).

    Science.gov (United States)

    Haggerty, Sharon, Ed.; Holmes, Ann, Ed.

    This two-volume set of papers was produced for the seventh International Gender and Science and Technology (GASTA) Conference. Abstracts of all papers and other presentations have been translated and are published in both English and French. Papers are published in the language in which they were submitted (English or French). GASAT provides a…

  3. Perspectives on U.S. Competitiveness in Science and Technology. Conference Proceedings (Washington, DC, November 8, 2006)

    Science.gov (United States)

    Galama, Titus, Ed.; Hosek, James, Ed.

    2007-01-01

    Concern has grown that the United States is losing its competitive edge in science and technology (S&T). The factors driving this concern include globalization, the rise of science centers in developing countries such as China and India, the increasing number of foreign-born Ph.D. students in the United States, and claims of a shortage of…

  4. Spacecraft Charging Technology Conference (9th) Held in Tsukuba, Japan on 4-8 April 2005. Book of Abstracts

    Science.gov (United States)

    2005-04-01

    8M2-585-8655 FAX: +8142-583-5119 E-mail : fuiii@tmit.ac.jp Haruki Takegahara Tokyo Metropolitan Institute of Technology Kohichiro OYAMA...DESIGN of SATELLITE SYSTEMS against SPACECRAFT CHARGING Noriyoshi Onodera, Yoichi Murakami , Hideaki Koakutsu Mitsubishi Electric Corporation Phone

  5. Summary of the NATO/CCMS Conference The Demonstration of Remedial Action Technologies for Contaminated Land and GroundWater

    Science.gov (United States)

    The problem of contamination to land and groundwa- ter from improper handling of hazardous materials/ waste is faced by all countries. Also, the need for reliable, cost-effective technologies to address this problem at contaminated sites exists throughout the world. Many countrie...

  6. Advanced biosensing methodologies developed for evaluating performance quality and safety of emerging biophotonics technologies and medical devices (Conference Presentation)

    Science.gov (United States)

    Ilev, Ilko K.; Walker, Bennett; Calhoun, William; Hassan, Moinuddin

    2016-03-01

    Biophotonics is an emerging field in modern biomedical technology that has opened up new horizons for transfer of state-of-the-art techniques from the areas of lasers, fiber optics and biomedical optics to the life sciences and medicine. This field continues to vastly expand with advanced developments across the entire spectrum of biomedical applications ranging from fundamental "bench" laboratory studies to clinical patient "bedside" diagnostics and therapeutics. However, in order to translate these technologies to clinical device applications, the scientific and industrial community, and FDA are facing the requirement for a thorough evaluation and review of laser radiation safety and efficacy concerns. In many cases, however, the review process is complicated due the lack of effective means and standard test methods to precisely analyze safety and effectiveness of some of the newly developed biophotonics techniques and devices. There is, therefore, an immediate public health need for new test protocols, guidance documents and standard test methods to precisely evaluate fundamental characteristics, performance quality and safety of these technologies and devices. Here, we will overview our recent developments of novel test methodologies for safety and efficacy evaluation of some emerging biophotonics technologies and medical devices. These methodologies are based on integrating the advanced features of state-of-the-art optical sensor technologies and approaches such as high-resolution fiber-optic sensing, confocal and optical coherence tomography imaging, and infrared spectroscopy. The presentation will also illustrate some methodologies developed and implemented for testing intraocular lens implants, biochemical contaminations of medical devices, ultrahigh-resolution nanoscopy, and femtosecond laser therapeutics.

  7. Landslide Susceptibility Mapping Using Geospatial Technology in South Eastern Part of Nilgiri District, Tamilnadu, India

    Science.gov (United States)

    Thangasamy, N.; Varathan, R.

    2013-05-01

    Landslides are often destructive and periodically affect the Nilgiris district. Two method viz., Frequency ratio (FR) and Weights of evidence (WofE) were used to reclassify the sub-variables and the landslide susceptibility index (LSI) was calculated by weighted sum overlay analysis. The final LS Zonation map was prepared from the LSI and the area was classified into two zones. Validation of the LSM was the next step and was accomplished by excluding some landslide points in the GIS analyses and overlying the unused landslides points over the LSM. The LSMs prepared using the FR and WofE methods are reliable as more than 75% of the excluded slides fall in high and very high landslide susceptibility zones and the error of mismatch in the two maps is negligible.During the course of this study landslides devastated the Kethi, Coonoor, Barliyar and Kothagiri areas due to an extreme event with 374 to 1,171 mm rainfall received in these stations in just three days on 8th to 10th November, 2009. The rainfall event is unprecedented and such extreme rainfall has not occurred in the region since meteorological records are maintained. Over 100 landslides took place in the area of which 75 are major slides and more 43 people died and 200 houses were damaged. The event was documented and a data base containing the location, details of death, slide characteristics and photographs was prepared. Further, the probability of landslide occurrence may change over time due to changes in land use, unscientific massive developmental activities and establishing settlements without adopting proper safety measures. The study also highlights the need for maintenance of landslide database and installation of more rain gauge stations to update and improve the LSM so as to reduce the risk of landslide hazard faced by the Community. NaveenRaj.T INDIA LANDSLIDE SUSCEPTIBILITY MAPPING USING GEOSPATIAL TECHNOLOGY IN SOUTH EASTERN PART OF NILGIRI DISTRICT, TAMILNADU, INDIA.

  8. Developing a voltage-stability-constrained security assessment system part II : Structure and function design and technology used

    OpenAIRE

    Ni, YX; Wu, FF; Shi, LB; Zhou, HF; Tam, PTC; Chang, NC; Su, JF; Du, ZB

    2005-01-01

    This is the second part in a two-part paper on the development of a voltage stability constrained security assessment system (VSC-SAS). In this part, overall VSC-SAS structure and function design and technology used will be presented. The system is expected to be used in both on-line and off-line modes. In on-line mode, on-line SCADA/EMS data will be used for VSC-SAS use; while in off-line mode (usually day-ahead calculation), historical data can be used for VSC-SAS. Both results (i.e. system...

  9. EPRI-DOE Conference on Environmentally- Enhanced Hydropower Turbines: Technical Papers

    Energy Technology Data Exchange (ETDEWEB)

    None

    2011-12-01

    The EPRI-DOE Conference on Environmentally-Enhanced Hydropower Turbines was a component of a larger project. The goal of the overall project was to conduct the final developmental engineering required to advance the commercialization of the Alden turbine. As part of this effort, the conference provided a venue to disseminate information on the status of the Alden turbine technology as well as the status of other advanced turbines and research on environmentally-friendly hydropower turbines. The conference was also a product of a federal Memorandum of Understanding among DOE, USBR, and USACE to share technical information on hydropower. The conference was held in Washington, DC on May 19 and 20, 2011 and welcomed over 100 attendees. The Conference Organizing Committee included the federal agencies with a vested interest in hydropower in the U.S. The Committee collaboratively assembled this conference, including topics from each facet of the environmentally-friendly conventional hydropower research community. The conference was successful in illustrating the readiness of environmentally-enhanced hydropower technologies. Furthermore, the topics presented illustrated the need for additional deployment and field testing of these technologies in an effort to promote the growth of environmentally sustainable hydropower in the U.S. and around the world

  10. EPRI-DOE Conference on Environmentally-Enhanced Hydropower Turbines: Technical Papers

    Energy Technology Data Exchange (ETDEWEB)

    Hogan, T. [Alden Research Laboratory, Inc., Holden, MA (United States)

    2011-12-01

    The EPRI-DOE Conference on Environmentally-Enhanced Hydropower Turbines was a component of a larger project. The goal of the overall project was to conduct the final developmental engineering required to advance the commercialization of the Alden turbine. As part of this effort, the conference provided a venue to disseminate information on the status of the Alden turbine technology as well as the status of other advanced turbines and research on environmentally-friendly hydropower turbines. The conference was also a product of a federal Memorandum of Understanding among DOE, USBR, and USACE to share technical information on hydropower. The conference was held in Washington, DC on May 19 and 20, 2011 and welcomed over 100 attendees. The Conference Organizing Committee included the federal agencies with a vested interest in hydropower in the U.S. The Committee collaboratively assembled this conference, including topics from each facet of the environmentally-friendly conventional hydropower research community. The conference was successful in illustrating the readiness of environmentally-enhanced hydropower technologies. Furthermore, the topics presented illustrated the need for additional deployment and field testing of these technologies in an effort to promote the growth of environmentally sustainable hydropower in the U.S. and around the world.

  11. Report of the 2014 Cent Gardes HIV Vaccine Conference-Part 2: Cell-mediated immunity, mucosal protection, and clinical trials: Fondation Mérieux Conference Center, Veyrier du Lac, France, 5-7 October, 2014.

    Science.gov (United States)

    Girard, Marc P; Picot, Valentina; Longuet, Christophe; Nabel, Gary J

    2015-08-07

    The 2014 Cent Gardes Conference took place on October 5-7, 2014, at the Fondation Mérieux Conference Center, on the shores of the Annecy Lake and aimed to review the progress and promise of HIV vaccines. The elicitation of broadly neutralizing antibodies (bNAbs), their use in passive immunization, as well as their genetic delivery (vector immunoprophylaxis) by a recombinant Adenovirus-associated virus (AAV) vector were reviewed in a preceding article [1]. Approaches to the elicitation of long-lasting T cell or mucosal immunity were also discussed and are now reviewed here. The possibility of eliciting mucosal IgAs was discussed, since it was demonstrated that transcytosis-blocking IgAs can protect monkeys against repeated vaginal challenge with a pathogenic chimeric simian and human immunodeficiency virus (SHIV). The possibility of purging the HIV reservoirs from HIV-infected persons and developing a cure of the disease was also discussed. Copyright © 2015. Published by Elsevier Ltd.. All rights reserved.

  12. First Biomass Conference of the Americas: Energy, environment, agriculture, and industry. Proceedings, Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    1993-10-01

    This conference was designed to provide a national and international forum to support the development of a viable biomass industry. Although papers on research activities and technologies under development that address industry problems comprised part of this conference, an effort was made to focus on scale-up and demonstration projects, technology transfer to end users, and commercial applications of biomass and wastes. The conference was divided into these major subject areas: Resource Base, Power Production, Transportation Fuels, Chemicals and Products, Environmental Issues, Commercializing Biomass Projects, Biomass Energy System Studies, and Biomass in Latin America. The papers in this second volume cover Transportation Fuels, and Chemicals and Products. Transportation Fuels topics include: Biodiesel, Pyrolytic Liquids, Ethanol, Methanol and Ethers, and Commercialization. The Chemicals and Products section includes specific topics in: Research, Technology Transfer, and Commercial Systems. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  13. Conference-Courses for Academic Credit.

    Science.gov (United States)

    Bobes, Marvin

    1979-01-01

    The Wayne State University Studies/Weekend College Program demonstrates a cost effective, flexible model for conference courses. Designed to give adult, part-time students short-term intensive learning experiences, the conference course adapts typical conference activities (guest speakers, films, workshops) to a single or multidisciplinary theme,…

  14. Taking Part in the Dance: Technology Teachers Interacting with Communities of Practice

    Science.gov (United States)

    Slatter, Wendy; France, Bev

    2011-01-01

    This research investigated how secondary school technology teachers planned and implemented units that enabled students to access authentic technological practice through their contact with a community of practice (CoP). It was found that when teachers plan to access a community of practice for their students a complex dance-style relationship…

  15. Using Digital Technology to See Angles from Different Angles. Part 2: Openings and Turns

    Science.gov (United States)

    Host, Erin; Baynham, Emily; McMaster, Heather

    2015-01-01

    Ever wondered how to use technology to teach angles? This article follows on from an earlier article published last year, providing a range of ideas for integrating technology and concrete materials with the teaching of angle concepts. The authors also provide a comprehensive list of free online games and learning objects that can be used to teach…

  16. A History of Instructional Design and Technology: Part I: A History of Instructional Media.

    Science.gov (United States)

    Reiser, Robert A.

    2001-01-01

    Discusses the history of the field of instructional design and technology in the United States. Includes a definition, major features, rational for using instructional design and technology as the label for the field, history of instructional media from 1900 to the present, effects media have had on instructional practices, and the effect…

  17. JPRS Report Science & Technology Japan STA 1988 White Paper Part 2.

    Science.gov (United States)

    1989-12-13

    crops, including potatoes and tangerines , in March 1988 at the national research institutes and JAERI. The irradiation of food has come to be...advanced technology seeds cul- tivation research consignment costs 1,253 1,242 100 Seed cultivation by advanced bio- 100 technology...Laboratory, Tsukuba Medicinal Plant Cultivation Laboratory Agricultural Research Center Agricultural Biological Resources Research Institute

  18. Cost/benefit analysis of advanced materials technology candidates for the 1980's, part 2

    Science.gov (United States)

    Dennis, R. E.; Maertins, H. F.

    1980-01-01

    Cost/benefit analyses to evaluate advanced material technologies projects considered for general aviation and turboprop commuter aircraft through estimated life-cycle costs, direct operating costs, and development costs are discussed. Specifically addressed is the selection of technologies to be evaluated; development of property goals; assessment of candidate technologies on typical engines and aircraft; sensitivity analysis of the changes in property goals on performance and economics, cost, and risk analysis for each technology; and ranking of each technology by relative value. The cost/benefit analysis was applied to a domestic, nonrevenue producing, business-type jet aircraft configured with two TFE731-3 turbofan engines, and to a domestic, nonrevenue producing, business type turboprop aircraft configured with two TPE331-10 turboprop engines. In addition, a cost/benefit analysis was applied to a commercial turboprop aircraft configured with a growth version of the TPE331-10.

  19. International Conference on Defects in Semiconductors (19th), ICDS-19, Held in Aveiro, Portugal on 21-25 July 1997, Part 1

    Science.gov (United States)

    1998-01-23

    new Cultural and Congress Centre in Aveiro, Portugal. Here 263 delegates presented new data on defects in semiconductors, surveyed current knowlege... Turismo Rota da Luz Caves Säo Joäo Caves Alianca We also acknowledge the support in the form of staff time and facilities given to the conference by the...Scientific Research (1997 and 1998) on Kiban-B from the Ministry of Education, Science and Culture , Japan. References. 1. T.S. Plaskett, Trans. Metall. Soc

  20. [Mathematics, natural sciences and technology--parts of the encyclopedia Die Kultur der Gegenwart (The culture of today)].

    Science.gov (United States)

    Tobies, Renate

    2008-03-01

    The paper explores the trend of the early 20th century to consolidate mathematics, natural sciences, medicine and technology under the umbrella of one integrative culture--a tendency which contrasts with the increasing mainstream trend of separating the humanities from the natural sciences. The unifying umbrella was framed by the great encyclopedia Die Kultur der Gegenwart which was published by B. G. Teubner from 1905 to 1925 and was planned to run up to 62 volumes. We analyze the quantitative rate of the parts devoted to the humanities, the natural sciences and technology, respectively, the degree to which these parts were completed in this encyclopedia. In particular, we investigate the role of mathematicians and their reasons to find a classification for the mathematical, natural scientific and engineering parts of culture as well as their reasons, to win Nobel prize winners and other famous scientists to become co-editors and authors. We examine the published volumes in the fields of mathematics, chemistry, physics, astronomy and technology in order to show what type of publication--professional or popular--was intended. Furthermore, we illuminate how the educational reform of mathematics, natural sciences and technology of this period--which included a reform of girls' and women's education--was reflected in the encyclopedia Die Kultur der Gegenwart.

  1. Local and Global Mechanical Behavior and Microstructure of Ti6Al4V Parts Built Using Electron Beam Melting Technology

    Science.gov (United States)

    Ladani, Leila

    2015-09-01

    Laser and electron beam melting are prime technologies in metallic powder bed additive manufacturing in which parts are built layer by layer using high energy source. The technology is at a level where each layer can be as thin as 50 µm. Melting and solidification of each powder layer is typically accompanied by some subsurface melting to assure adherence and fusion of layers. In addition to anisotropic mechanical behavior of material caused by layering phenomenon, it is expected that the local mechanical behavior and microstructure vary throughout each build. In this manuscript, local and global mechanical behavior of Ti6Al4V parts produced using electron beam melting technology is investigated using bulk scale mechanical testing and nanoindentation. Parts fabricated in different build orientation were tested at different strain rates at a large scale. The experiment showed that strength is minimal perpendicular to the build plate. Additionally, material exhibited different local mechanical properties relative to distance from base plate. Investigation of the microstructure indicated very distinguished variations in the grain size and alpha and beta phase formation of material in different locations of part relative to build plate. Strength reduction in perpendicular direction is examined and explained through understanding of the microstructure and plastic deformation mechanism in α phase and prior β grains.

  2. Strategy Planning of Technology Development for High Speed Railways : Electrical Parts

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Y. J.; Kim, K. H.; Rim, G. H.; Ha, H. D.; Park, K. Y.; Lee, J. D.; Kang, D. H. [Korea Electrotechnology Research Institute (Korea, Republic of)

    1996-11-01

    At the beginning of 1996, Government has set up the Technology Development Program for High Speed Railways as a national project. Accordingly, the detailed action planning has been established with the collaboration works between Ministry of Construction and Transport and Ministry of Commerce and Trade. On the other hand, the current technology status of domestic manufacturer and many related organizations in Korea only reveals the lack of capabilities in producing the high speed trains. Without the technology transfer programs from the advanced foreign manufacturer (GEC-Alsthom), the domestic manufacturers could not produce HSR. Korea Electrotechnology Research Institute has steered the study to integrate the domestic engineering and technology units specialized in the diversified areas by formulating the feasible collaboration structure between KERI and many organizations on the technology basis. The long term action planning both with the strategic guide and on the technology basis shall be the key function to upgrade the current technology status feasibly for development of the advanced high speed train of 350 km/h. (author). refs., figs., tabs.

  3. Process design kit and circuits at a 2 µm technology node for flexible wearable electronics applications (Conference Presentation)

    Science.gov (United States)

    Torres-Miranda, Miguel; Petritz, Andreas; Gold, Herbert; Stadlober, Barbara

    2016-09-01

    In this work we present our most advanced technology node of organic thin film transistors (OTFTs) manufactured with a channel length as short as 2 μm by contact photolithography and a self-alignment process directly on a plastic substrate. Our process design kit (PDK) is described with P-type transistors, capacitors and 3 metal layers for connections of complex circuits. The OTFTs are composed of a double dielectric layer with a photopatternable ultra thin polymer (PNDPE) and alumina, with a thickness on the order of 100 nm. The organic semiconductor is either Pentacene or DNTT, which have a stable average mobility up to 0.1 cm2/Vs. Finally, a polymer (e.g.: Parylene-C) is used as a passivation layer. We describe also our design rules for the placement of standard circuit cells. A "plastic wafer" is fabricated containing 49 dies. Each die of 1 cm2 has between 25 to 50 devices, proving larger scale integration in such a small space, unique in organic technologies. Finally, we present the design (by simulations using a Spice model for OTFTs) and the test of analog and digital basic circuits: amplifiers with DC gains of about 20 dB, comparators, inverters and logic gates working in the frequency range of 1-10 kHz. These standard circuit cells could be used for signal conditioning and integrated as active matrices for flexible sensors from 3rd party institutions, thus opening our fab to new ideas and sophisticated pre-industrial low cost applications for the emerging fields of biomedical devices and wearable electronics for virtual/augmented reality.

  4. 7th european metallurgical conference EMC 2013

    Directory of Open Access Journals (Sweden)

    Srećko R. Stopić

    2014-02-01

    Full Text Available From June 23 – 26, 2013, the GDMB Society for Mining, Metallurgy, Resource and Environmental Technology organized 7th European Metallurgical Conference (EMC 2013 in Weimar, Germany. The previous European metallurgical conferences were organized by  the GDMB in Friedrichshafen (2001, Hanover (2003, Leipzig (2005, Duesseldorf (2007, Innsbruck (2009, and Duesseldorf (2011. The GDMB is a non-profit organization from Clausthal, Germany,,focused on combining science with practical experience in metallurgy, mining, materials engineering, mineral processing, recycling and refining of metals, and  manufacturing of semi- and finishing products. The European Metallurgical conference EMC is one of the most well-known conferences worldwide in the field of non-ferrous metallurgy and is attended regularly by decision makers from industry and universities. The scientific program contained 6 plenary lectures and more than 130 presentations. An extensive poster exhibition was held, during which the authors had an opportunity to introduce their posters to the entire plenum as a part of a brief presentation., The € 500 worth “Poster Award EMC 2011 was awarded to Christoph Pichler from the Montan-University in Leoben, Austria. Not only the most important European countries were represented here, but also more than one third of the lecturers were from countries outside Europe (Canada, Japan, China, USA, South Africa, Australia. The origin of the participants reflects the aim of the organizers: to make this conference a worldwide platform for the scientific exchange of experience and information. The scientific presentations of the conference are presented in Proceedings: Vol. 1: Copper, Precious Metals, Waste effluents Treatment/ Biohydrometallurgical applications; Process Metallurgy, Bridging Non-Ferrous and Ferrous Metallurgy; Vol. 2: Lead and Zinc, Light metals, Sustainable technologies, Sustainable of non-ferrous metals production, Process Control

  5. 5th International Conference on ICT Innovations

    CERN Document Server

    Anastas, Misev; ICT Innovations 2013 : ICT Innovations and Education

    2014-01-01

    Information communication technologies have become the necessity in everyday life enabling increased level of communication, processing and information exchange to extent that one could not imagine only a decade ago. Innovations in these technologies open new fields in areas such as: language processing, biology, medicine, robotics, security, urban planning, networking, governance and many others. The applications of these innovations are used to define services that not only ease, but also increase the quality of life. Good education is essential for establishing solid basis of individual development and performance. ICT is integrated part of education at every level and type. Therefore, the special focus should be given to possible deployment of the novel technologies in order to achieve educational paradigms adapted to possible educational consumer specific and individual needs.  This book offers a collection of papers presented at the Fifth International Conference on ICT Innovations held in September 20...

  6. Basic research on energy conservation in developing countries. Report of the International Conference on Adaptation and Mitigation Technologies for Climate Change; Hatten tojokoku energy shohi koritsuka kiso chosanado jigyo. Kiko hendo ni kansuru tekio kanwa gijutsu kokusai kaigi hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The International Conference on Adaptation and Mitigation Technologies for Climate Change was held based on the 1st Conference of the Parties in 1995 of the United Nations Framework Convention on Climate Change, and the 2nd evaluation report of the Intergovernmental Panel on Climate Change (IPCC). This report carries the outline of this conference and minutes. Japanese government had studied the framework of activities implemented jointly (AIJ) for emission control of greenhouse gases by voluntary workers jointly with developing countries. The government decided the basis of the AIJ Japan program in 1995, and approved the evaluation guidelines of this program including confirmed and considered matters which are necessary for government offices related to this program to evaluate and approve each project. IPCC approved the 2nd evaluation report in its general meeting in 1995. This conference was thus held to discuss strategic technology and international cooperation with participation of writers of the 2nd IPCC report, policy planners of Asian countries, Japanese industries, governmental offices and NGO.

  7. Laser-Hybrid welding, an innovative technology to join automotive body parts

    Science.gov (United States)

    Sieben, Manuel; Brunnecker, Frank

    The design of Tail lamps has been changed dramatically since cars built. At modern lamps, the lenses are absolutely transparent and allow a direct view onto the weld seam. Conventional welding technologies, such as vibration and hot plate welding cannot compete with this demand. Focused on this targeted application, LPKF Laser & Electronics AG has developed in cooperation with the Bavarian Laser Centre a unique Laser welding technology called hybrid welding.

  8. Environmental Aspects Of The Green Surface Plastic Deformation Technology Of Car Parts

    Science.gov (United States)

    Grigoriev, S. N.; Bobrovskij, N. M.; Bobrovskij, I. N.; Melnikov, P. A.; Lukyanov, A. A.

    2017-01-01

    Foreign and domestic experience in development of dry processing technologies are considered. The results of the introduction of dry processing technologies (cutting, boring, milling, drilling) on the industrial companies in Germany are given. The negative impact on the environment and human health is shown. The possible ways of leakage of lubricoolant components in the atmosphere and soil are considered. Lubricoolants are considered as a required permanent component. Three main tasks for lubricoolant: cooling, lubricating and chip disposal are discribed.

  9. Evaluating Colombian SMEs’ technological innovation: Part 1: conceptual basis, evaluation methodology and characterisation of innovative companies

    OpenAIRE

    Óscar Fernando Castellanos Domínguez; Luz Marina Torres; Aida Mayerly Fúquene Montañez

    2010-01-01

    Innovative processes currently constitute one of the most important alternatives for increasing organisations’ levels of competitiveness and productivity. The Colombian state (being conscious of this) has generated mechanisms aimed at encouraging technological and innovative development activities in SMEs, as was the case with the Colombian Prize for Entrepreneurial Technological Innovation for SME (Innova) 2006. The experience acquired through the technical evaluation of such prize was a ...

  10. DESIGN TECHNOLOGY FOR INJECTION MOLD PARTING SURFACE BASED ON CASES AND KNOWLEDGE

    Institute of Scientific and Technical Information of China (English)

    Yu Tongmin; Li Guanhua; Li Youmin; Lan Jian

    2005-01-01

    On the basis of the comprehensive analysis about the automatic generation of the injection mold parting surface, the parting surface design method which introduces knowledge and casebased reasoning (CBR) into the computer-aided design is described by combining with the actual characteristic in injection mold design, and the design process of case-based reasoning method is also given. A case library including the information of parting surface is built with the index of main shape features. The automatic design of the mold parting surface is realized combined with the forward-reasoning method and the similarity solution procedure. The rule knowledge library is also founded including the knowledge, principles and experiences for parting surface design. An example is used to show the validity of the method, and the quality and the efficiency of the mold design are improved.

  11. International Pacific Air and Space Technology Conference and Aircraft Symposium, 29th, Gifu, Japan, Oct. 7-11, 1991, Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-01

    Various papers on air and space technology are presented. Individual topics addressed include: media selection analysis: implications for training design, high-speed challenge for rotary wing aircraft, high-speed VSTOL answer to congestion, next generation in computational aerodynamics, acrobatic airship 'Acrostat', ducted fan VTOL for working platform, Arianespace launch of Lightsats, small particle acceleration by minirailgun, free-wake analyses of a hovering rotor using panel method, update of the X-29 high-angle-of-attack program, economic approach to accurate wing design, flow field around thick delta wing with rounded leading edge, aerostructural integrated design of forward-swept wing, static characteristics of a two-phase fluid drop system, simplfied-model approach to group combustion of fuel spray, avionics flight systems for the 21st century. Also discussed are: Aircraft Command in Emergency Situations, spectrogram diagnosis of aircraft disasters, shock interaction induced by two hemisphere-cylinders, impact response of composite UHB propeller blades, high-altitude lighter-than-air powered platform, integrated wiring system, auxiliary power units for current and future aircraft, Space Shuttle Orbiter Auxiliary Power Unit status, numerical analysis of RCS jet in hypersonic flights, energy requirements for the space frontier, electrical system options for space exploration, aerospace plane hydrogen scramjet boosting, manual control of vehicles with time-varying dynamics, design of strongly stabilizing controller, development of the Liquid Apogee Propulsion System for ETS-VI.

  12. Technological Support of Estimating Functional Opportunities of Higher Parts of Central Nervous System in the Individuals with Auditory Deprivation

    Directory of Open Access Journals (Sweden)

    Makarenko M.V.

    2016-10-01

    Full Text Available A new computerized technology of investigating and estimating the individual features of higher parts of the central nervous system in people with auditory deprivation is offered. The essence of the offered technology for investigating and estimating individual functional opportunities of higher parts of the nervous system of an individual with auditory deprivation consists in using the specific sequence of representing the load tests with corresponding criteria of estimating the processed information of different level of complexity, which are applied on hardware devices developed by us. We represented the scales for estimating the parameters of simple and complex sensorimotor reactions, speed qualitative and quantitative indicators of processing information based on the typological properties of the nervous system, such as the functional mobility, strength and balance of basic nervous processes. We suppose that the research using the same tests and criteria of estimating neuro-dynamic properties will increase the opportunity for the analysis of different experimental material and enhance its value

  13. Possibilities of the Technology of Additive Production for Making Complex-Shape Parts and Depositing Functional Coatings from Metallic Powders

    Science.gov (United States)

    Grigor'ev, S. N.; Tarasova, T. V.

    2016-01-01

    The aspects of terminology, definitions and classification in the technology of additive production are considered. The principal possibility of fabrication of complex-shape parts from a refractory cobalt alloy by the method of selective laser melting and deposition of hard and wear-resistant coatings from Ti and SiC powders by coaxial laser surfacing is shown. The technological possibility of microlaser surfacing with lateral resolution about 100 μm in the production of parts from aluminum alloys is considered. The mechanisms of formation of structure in the studied alloys typical for selective laser melting, laser surfacing and microlaser surfacing are determined. The physical and mechanical properties of the alloys are investigated.

  14. Autonomous Rendezvous and Docking Conference, volume 1

    Science.gov (United States)

    1990-01-01

    This document consists of the presentation submitted at the Autonomous Rendezvous and Docking (ARD) Conference. It contains three volumes: ARD hardware technology; ARD software technology; and ARD operations. The purpose of this conference is to identify the technologies required for an on orbit demonstration of the ARD, assess the maturity of these technologies, and provide the necessary insight for a quality assessment of the programmatic management, technical, schedule, and cost risks.

  15. Autonomous Rendezvous and Docking Conference, volume 3

    Science.gov (United States)

    1990-01-01

    This document consists of the presentation submitted at the Autonomous Rendezvous and Docking (ARD) Conference. The document contains three volumes: ARD hardware technology; ARD software technology; and ARD operations. The purpose of this conference is to identify the technologies required for an on orbit demonstration of ARD, assess the maturity of these technologies, and provide the necessary insight for a quality assessment of programmatic management, technical, schedule, and cost risks.

  16. TECHNOLOGICAL PROVISION OF ACCURACY AND QUALITY PARAMETERS OF INTRICATE PROFILE PARTS AT HIGH-SPEED MULTI-COORDINATE MACHINING

    Directory of Open Access Journals (Sweden)

    V. K. Sheleg

    2009-01-01

    Full Text Available The paper considers requirements to CAM-systems for provision of high-speed multi-coordinate milling, principles of generation and recommendations on trajectory programming for high-speed machining, influence of vibration and balancing of the technological system on parameters of  the machining accuracy, characteristics of a cutting tool, types of tool coatings that is rather actual for improvement of accuracy and quality of intricate profile parts.

  17. Questionnaire regarding the international Freiberg conference on IGCC and XtL technologies. Analysis of 75 questionnaires

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    The Puertollano IGCC Plant, owned by ELCOGAS, uses a mixture (50/50% weight) of local coal with high content of ash (approximately 45%) and pet-coke to be fed into its pressurised entrained flow gasifier. Ash is removed from the bottom of the gasifier as vitrified slag although a fraction is converted into fly ash (2.5-3 t/h) and entrained by the syngas. In order to remove this fly ash, it is filtered in two candle filter vessels with more than 1,000 candles each, using nitrogen for on-line cleaning. The filtering system suffers some malfunctions resulting in blinding of the internal candle surface and increasing of the candle DP. The model of candle filter was changed and modifications were performed without the desired results. Therefore, the identification of suitable hot gas filtration technologies capable of overcoming current and future severe operational constraints experienced is of the utmost importance for IGCC units. In this sense, a pilot plant which allows the performance of alternative filtering elements tests, pulse cleaning strategies, on-line particulate monitoring and off-cleaning procedures has come into operation at the ESI-University of Seville facilities. The design has been conceived as a versatile pilot unit, in order to hold both bags and ceramic candles which are to be tested in a wide range of operating conditions. The pilot is processing air laden with real fly ash provided by ELCOGAS, and high pressure nitrogen for the cleaning operation. This paper describes the design and operation of the pilot as well as the testing plan currently being carried out. (orig.)

  18. Conference Report: 5th Annual Georgia Conference on Information Literacy

    Directory of Open Access Journals (Sweden)

    Rebecca Ziegler

    2009-11-01

    Full Text Available The 5th annual Georgia Conference on Information Literacy took place in Savannah, Georgia on October 3-4, 2008. Since its inception, this conference has drawn participants from across the United States and even a few from abroad. Jointly sponsored by the Zach S. Henderson Library, the Department of Writing and Linguistics, the College of Education, and the Center for Continuing Education at Georgia Southern University, the conference offers both theoretical and practical discussions of the complex issues involved in teaching students how to find, interpret and use information in emerging electronic technologies against the backdrop of one of America’s loveliest cities.

  19. AINSE`s 40th anniversary conference. Conference handbook

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    Highlights of 40 years of activity of the Australian Institute of Nuclear Science and Engineering (AINSE) were the main focus of this conference. Topics covered include nuclear physics, plasma physics, radiation chemistry, radiation biology, neutron diffraction, nuclear techniques of analysis and other relevant aspects of nuclear science and technology. The conference handbook contains the summaries of the 78 papers and posters presented and the list of participants

  20. 2013 APPLEPIES Conference

    CERN Document Server

    2014-01-01

    This book provides a thorough overview of cutting-edge research on electronics applications relevant to industry, the environment, and society at large. A wide spectrum of application domains are covered, from automotive to space and from health to security, and special attention is devoted to the use of embedded devices and sensors for imaging, communication, and control. The book is based on the 2013 APPLEPIES Conference, held in Rome, which brought together researchers and stakeholders to consider the most significant current trends in the field of applied electronics and to debate visions for the future. Areas covered by the conference included information communication technology; biotechnology and biomedical imaging; space; secure, clean, and efficient energy; the environment; and smart, green, and integrated transport. As electronics technology continues to develop apace, constantly meeting previously unthinkable targets, further attention needs to be directed toward the electronics applications and th...

  1. International Conference on Defects in Semiconductors (19th), ICDS-19, Held in Aveiro, Portugal on 21-25 July 1997, Part 2

    Science.gov (United States)

    1998-01-23

    to Dr. R. Pareja for their comments. REFERENCES [1] ICPA88. Positron Annihilation. Proceedings of the 8th International Conference on Positron... Pareja , A. Segura and A. Chevy, J. Phys. C: Solid State Phys. 21, 4403(1988). [3] R.M. de la Cruz, R. Pareja , A. Segura, P. Moser and A. Chevy, Appl...Phys. A54, 147(1992). [4] R.M. de la Cruz, R. Pareja , A. Segura, V. Mufioz and A. Chevy, 1240 Defects in Semiconductors - ICDS-19 J. Phys:Condensed

  2. Annual Conference on Composites and Advanced Ceramic Materials, 12th, Cocoa Beach, FL, Jan. 17-22, 1988, Proceedings. Parts 1 and 2

    Energy Technology Data Exchange (ETDEWEB)

    1988-10-01

    The present conference discusses topics in the development status of advanced ceramics, the engineering applications of ceramic-matrix composites, modeling and theoretical considerations of engineering ceramics, the role of interfaces in ceramic-matrix composites, and polycrystalline oxide-matrix composites. Also discussed are glass- and glass-ceramic-matrix composites, carbide- and nitride-matrix composites, the synthesis methods as well as the properties and applications of ceramic matrix-reinforcing whiskers, fibers, and powders, and various SDI-related advanced ceramic materials for use in orbital systems.

  3. PREFACE: The Irago Conference 2012

    Science.gov (United States)

    Sandhu, Adarsh; Okada, Hiroshi

    2013-04-01

    The Irago Conference 2012 - 360 degree outlook on critical scientific and technological challenges for a sustainable society Organized by the Electronics-Inspired Interdisciplinary Research Institute (EIIRIS) at Toyohashi University of Technology, the Irago Conference, held recently (15-16 November) in Aichi, Japan, aimed to enhance mutual understanding between scientists, engineers and policymakers. Over 180 participants tackled topics ranging from energy and natural resources to public health and disaster prevention. The 360-degree outlook of the conference impressed speakers and guests. ''This conference has been extremely informative,'' noted Robert Gellar from the University of Tokyo. ''A unique conference with experts from a range of backgrounds,'' agreed Uracha Ruktanonchai from the National Nanotechnology Center (NANOTEC) in Thailand. Similarly, G P Li, professor of electrical engineering and computer science at the University of California Irvine commented that he had been ''able to think the unthinkable'' as a range of topics came together. The conference was streamed live on Ustream to ensure that researchers from across the world could benefit from thought-provoking presentations examining global issues such as energy, disaster mitigation and nanotechnology. ''This was wonderful,'' said Oussama Khatib from Stanford University, ''A good recipe of speakers from such a range of backgrounds.'' Manuscripts submitted to the organizers were peer-reviewed, and the papers in this proceedings were accepted for Journal of Physics: Conference Series. In addition to the formal speaker programme, graduate-student sessions provided a platform for graduate students to describe their latest findings as oral presentations. A series of excursions to relevant locations, such as the Tahara megasolar region under construction and a local car-manufacturing factory, gave participants the opportunity to further consider practical applications of their research in industry

  4. Rotor-Bearing Dynamics Technology Design Guide. Part 4. Cylindrical Roller Bearings

    Science.gov (United States)

    1979-12-01

    ýbluck ,,lb.,mb i Tapered Roller Bearings Roller Beating Stiffness Tapered Roller Bearing Stiffness Turbine Bearings VRoller Bearings Rotordynamics ...input for rotordynamic response programs. The complete stiffness matrix is calculated including centrifugal effects. Considerations such as elastohydro...those parts directly connected with preparation of input for the rotordynamic response programs (Part 1(5) of the revised series) were retained. The

  5. Energy technology and global policy: a selection of contributin papers to the conference on energy policies and the international system. [Proceedings; 15 papers

    Energy Technology Data Exchange (ETDEWEB)

    Saltzman, S.E. (ed.)

    1977-01-01

    Energy is considered as part of a complex of resources and technologies, the effects of which are both interdisciplinary and transnational. This symposium took place at the height of the energy crisis, being planned long in advance. Elizabeth Mann Borgese presented an introductory paper. N.B. Guyol presented as Energy Overview, World Energy Requirements and Supplies, 1970--2000. Part I, Science and Technology Aspects, contains 5 papers: Some Problems Posed by the Growing Demand for Energy, Jacques Piccard; Solar Energy, A Key to Global Survival, William E. Heronemus; The Fast Breeder as a Cornerstone for Future Large Supplies of Energy, Wolf Hafele; Fusion Reactors as FUture Energy Sources, R. F. Post and F. L. Ribe; Energy Needs and the Atmosphere, Wendell Mordy. Part II, Interdisciplinary and Policy Aspects, contains 10 papers: A Survey of Internaational Energy Institutions and Policy Mechanisms, Keith J. Walton; A Crude but Plausible Model for Worldwide Energy Needs into the Next Century, Bernard T. Feld; Rural Progress and the Role of Energy among LDCs, Laurence I. Hewes, Jr.; Energy and Poorer Countries: the Context of a Strategy, Norton Ginsburg; Energy, Money, and International Trade, Ronald Segal; Peaceful Nuclear Power as a Military Equalizer, David Krieger; Energy and the Oceans, Elizabeth Mann Borgese; Research Priorities on Global Energy Policy Issues: A suggested Analtytical Framework, John Hanessian, Jr. and Jean M. Johnson; World Energy Model: A Tool for Long-Term Planning, Mihajlo Mesarovic and Eduard Pestel; and Proposal for the Establishment of an International Energy Institute, Elizabeth Mann Borgese. (MCW)

  6. Mendel conference

    CERN Document Server

    2015-01-01

    This book is a collection of selected accepted papers of Mendel conference that has been held in Brno, Czech Republic in June 2015. The book contents three chapters which represent recent advances in soft computing including intelligent image processing and bio-inspired robotics.: Chapter 1: Evolutionary Computing, and Swarm intelligence, Chapter 2: Neural Networks, Self-organization, and Machine Learning, and Chapter3: Intelligent Image Processing, and Bio-inspired Robotics. The Mendel conference was established in 1995, and it carries the name of the scientist and Augustinian priest Gregor J. Mendel who discovered the famous Laws of Heredity. In 2015 we are commemorating 150 years since Mendel's lectures, which he presented in Brno on February and March 1865. The main aim of the conference was to create a periodical possibility for students, academics and researchers to exchange their ideas and novel research methods.  .

  7. Science and Technology of China Onshore Petroleum Industry Towards 21st Century (Part 4)

    Institute of Scientific and Technical Information of China (English)

    Fu Chengde; Liu Bingyi; Gao Chao

    1996-01-01

    @@ V. Oil/Gas Field Construction and Oil/Gas Storage and Transportation Techniques The surface engineering construction of oil and gas fields in China has made great progress in various respects of technology, such as oil and gas gathering and transferring,water injection, treating technology and equipment for oil,gas and water, automation of oil/gas field, techniques of surface engineering for special oil and gas reservoirs,sulfur-resistant and anti-corrosion techniques for recovery and gathering of sour gas field.

  8. Addendum to material selection guidelines for geothermal energy-utilization systems. Part I. Extension of the field experience data base. Part II. Proceedings of the geothermal engineering and materials (GEM) program conference (San Diego, CA, 6-8 October 1982)

    Energy Technology Data Exchange (ETDEWEB)

    Smith, C.S.; Ellis, P.F. II

    1983-05-01

    The extension of the field experience data base includes the following: key corrosive species, updated field experiences, corrosion of secondary loop components or geothermal binary power plants, and suitability of conventional water-source heat pump evaporator materials for geothermal heat pump service. Twenty-four conference papers are included. Three were abstracted previously for EDB. Separate abstracts were prepared for twenty-one. (MHR)

  9. Conference Notification

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Roskill Information Services and Metal Events Ltd areorganizing the 2nd International Rare Earths Conference,which will be held at the Conrad Hotel in Hong Kong onFebruary 28 to March 2 2006.The program is structured tocover all the main aspects of the rare earths industry,including development of Chinese rare earth industry; trendsin rare earths demand; potential constraints on supply;research on potential capacity of rare earths supply chain.Global rare earths consumers will attend the conference.Registra...

  10. First biomass conference of the Americas: Energy, environment, agriculture, and industry. Proceedings, Volume 3

    Energy Technology Data Exchange (ETDEWEB)

    1993-10-01

    This conference was designed to provide a national and international forum to support the development of a viable biomass industry. Although papers on research activities and technologies under development that address industry problems comprised part of this conference, an effort was made to focus on scale-up and demonstration projects, technology transfer to end users, and commercial applications of biomass and wastes. The conference was divided into these major subject areas: Resource Base, Power Production, Transportation Fuels, Chemicals and Products, Environmental Issues, Commercializing Biomass Projects, Biomass Energy System Studies, and Biomass in Latin America. The papers in this third volume deal with Environmental Issues, Biomass Energy System Studies, and Biomass in Latin America. Concerning Environmental Issues, the following topics are emphasized: Global Climate Change, Biomass Utilization, Biofuel Test Procedures, and Commercialization of Biomass Products. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  11. 4th Machining Innovations Conference

    CERN Document Server

    2014-01-01

    This contributed volume contains the research results presented at the 4th Machining Innovations Conference, Hannover, September 2013. The topic of the conference are new production technologies in aerospace industry and the focus is on energy efficient machine tools as well as sustainable process planning. The target audience primarily comprises researchers and experts in the field but the book may also be beneficial for graduate students.

  12. 9. international mouse genome conference

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    This conference was held November 12--16, 1995 in Ann Arbor, Michigan. The purpose of this conference was to provide a multidisciplinary forum for exchange of state-of-the-art information on genetic mapping in mice. This report contains abstracts of presentations, focusing on the following areas: mutation identification; comparative mapping; informatics and complex traits; mutagenesis; gene identification and new technology; and genetic and physical mapping.

  13. 9th Asian Conference on Intelligent Information and Database Systems

    CERN Document Server

    Nguyen, Ngoc; Shirai, Kiyoaki

    2017-01-01

    This book presents recent research in intelligent information and database systems. The carefully selected contributions were initially accepted for presentation as posters at the 9th Asian Conference on Intelligent Information and Database Systems (ACIIDS 2017) held from to 5 April 2017 in Kanazawa, Japan. While the contributions are of an advanced scientific level, several are accessible for non-expert readers. The book brings together 47 chapters divided into six main parts: • Part I. From Machine Learning to Data Mining. • Part II. Big Data and Collaborative Decision Support Systems, • Part III. Computer Vision Analysis, Detection, Tracking and Recognition, • Part IV. Data-Intensive Text Processing, • Part V. Innovations in Web and Internet Technologies, and • Part VI. New Methods and Applications in Information and Software Engineering. The book is an excellent resource for researchers and those working in algorithmics, artificial and computational intelligence, collaborative systems, decisio...

  14. Urban Ecology for Secondary Schools, Unit I - Technology and Environmental Pollution, Parts 1 and 2.

    Science.gov (United States)

    New York City Board of Education, Brooklyn, NY. Bureau of Curriculum Development.

    Materials for a course on Urban Ecology are developed in these two documents which represent the first unit - Technology and Environmental Pollution. The entire course consists of seven units dealing with the many aspects of our way of life that produce an effect on, and in turn affected by, the quality of our physical environment. Unit I treats…

  15. Evaluating Colombian SMEs’ technological innovation. Part 2: problems and challenges in innovation

    Directory of Open Access Journals (Sweden)

    Óscar Fernando Castellanos Domínguez

    2010-04-01

    Full Text Available As innovation is an extremely important aspect of economic progress, then new technologies and improving exist-ing ones must be evaluated for establishing the state of innovative culture and the ability to develop technology. The Colombian Innova award for Entrepreneurial Technological Innovation for SMEs was created in 2004, aimed at motivating technological and innovative development in this type of company. It also represents an important state initiative for promoting entrepreneurial innovation, providing a valuable source of information for establishing mechanisms for producing innovation in companies and gauging the current state of Colombian SMEs regarding innovation. This article outlines the structure of the award value chain, following-up and analysing the award’s results, understanding how it is awarded and identifying the actors involved in it. Analysing the award value chain led to identifying the lack of coordination between the National Innovation System (NIS and companies and establishing participants and award-winners’ geographical and sector distribution (contrasts being found between cities such as Bogotá, Medellín and Cali. The characteristics of processes leading to promoting innovation in participating companies (in most cases developing their innovative products or processes in completely organisationally endog-enous contexts were thus identified. These results (providing valuable information for strengthening the award also provided important input for strengthening strategies for promoting innovation in Colombian SMEs

  16. Preservice Science Teachers' Field Experiences with Educational Technologies as Part of Portfolio Development: A Turkish Perspective

    Science.gov (United States)

    Korkmaz, Hunkar; Gucum, Berna; Hakverdi, Meral

    2006-01-01

    The purpose of this study is to assess the usage of educational technology of pre-service science teachers in their field experiences. This study was carried out on 45 pre-service science teachers taking School Experience and Practice Teaching courses at Hacettepe University in Turkey. The data were obtained from the evaluation of pre-service…

  17. Assisted reproductive technologies are an integrated part of national strategies addressing demographic and reproductive challenges

    DEFF Research Database (Denmark)

    Ziebe, Søren; Devroey, Paul; Jensen, Tina Kold

    2012-01-01

    The decline in the total fertility rate in the latter half of the 20th century in many European countries is becoming increasingly important in determining the demographic composition of Europe and its individual member states. This review focuses on discussion surrounding how assisted reproductive...... technology (ART) can impact declining fertility rates....

  18. Maldistribution in air-water heat pump evaporators. Part 2: Economic analysis of counteracting technologies

    DEFF Research Database (Denmark)

    Mader, Gunda; Palm, Björn; Elmegaard, Brian

    2015-01-01

    In this study a methodology is applied to quantify the effect of evaporator maldistributionon operating costs of airewater heat pumps. The approach is used to investigate the cost-effectivenessof two technologies enabling to counteract maldistribution: a flash gasbypass setup and the individual...

  19. Solid-state microwave switches: Circuitry, manufacturing technologies and development trends. Review (Part 2)

    OpenAIRE

    Berezniak, Anatolii; Korotkov, Alexander S.

    2013-01-01

    This paper presents an overview of the process and design capabilities of state-of-the-art in the field of microwave solid state switches. The paper describes types of solid state switches, switch specifications, a review of technological advances in this area. The overview results indicate that AlGaN/GaN MMICs including solid state switches are realizable.

  20. Solid-state microwave switches: circuitry, manufacturing technologies and development trends. Review (Part 1)

    OpenAIRE

    Berezniak, Anatolii; Korotkov, Alexander S.

    2013-01-01

    This paper presents an overview of the process and design capabilities of state-of-the-art in the field of microwave solid state switches. The paper describes types of solid state switches, switch specifications, a review of technological advances in this area. The overview results indicate that AlGaN/GaN MMICs including solid state switches are realizable.

  1. [Historical sketch of modern pharmaceutical science and technology (Part 4). Post World War II 50 years].

    Science.gov (United States)

    Yamakawa, K

    1995-01-01

    A short history of the pharmaceutical science and technology, postwar 50 years is divided into nine sections for the purpose of discussion. 1. Japan's postwar rehabilitation, Japanese pharmaceutical industries and newly developed pharmaceutical sciences and technologies. In 1945, the Japanese pharmaceutical industry was reconstructed. Production of penicillin was carried out with the strong support of the U.S. Occupation Forces. New sciences in pharmacy (biochemistry, biopharmacy, pharmacology, microbiology, physical chemistry, etc.) were introduced in this period. 2. Introduction age of foreign new drugs and technology (1951 to 1960s). Japan gained independence in 1951. Japanese pharmaceutical companies imported many new drugs and new pharmaceutical technologies from the U.S.A. and European countries in this period. Then, these companies were reconstruction rapidly. However, consequently Japanese pharmaceutical companies were formed as an imitation industry. 3. Rapid economic growth period for pharmaceutical companies (1956 to 1970s). In this period, many Japanese pharmaceutical companies grew rapidly at an annual rate of 15-20% over a period of 15 years, especially with regard to the production of active vitamin B1 analog drugs and some OTC (public health drugs). Some major companies made large profits, which were used to construct research facilities. 4. Problems for the harmful effects of medicines and its ethical responsibility. In the 1970s, many public toxic and harmful effects of medicines were caused, especially SMON's disease. In this time, many pharmaceutical companies changed to its security got development of ethical drugs. 5. Self development of new drugs and administration of pharmaceutical rules (1970s). During the 1970s, many pharmaceutical laws (GLP, GCP, GMP, GPMSP etc.) were enacted by the Ministry of Health and Welfare. In 1976, the Japanese Pharmaceutical Affairs Law was revised, which set forth standards regarding the efficacy and safety of

  2. Innovation in health care technology: is it part of the problem or part of the solution? eHealth gives the answer.

    Science.gov (United States)

    Colas, Javier; Guillen, Alejandra; Moreno, Rafael

    2010-01-01

    There is no doubt that the contribution of the Health Care Technologies to the tremendous evolution on Medicine since mid XX century has been one of its most important pillars. At the same time the innovation has been sometimes accused of been the root of the increase in the Health Care expenditure to support the Health of the society. Actually, when the Health Care Systems are focusing not only on the critical processes but on the continuum of the disease, the application of innovation to the chronic diseases and, more specifically, in the Cardiovascular ones (specially the Cardiac Insufficiency), represents a great challenge for care givers, patients and the Health Care Systems as their treatment requires continuous medical care and patient self management. The key for establishing this continuity of care in an efficient way is based in the concept of "Anticipation". This is the only way to avoid the burden of the continuous re-hospitalizations of this kind of patients. The engagement of patients in the adoption of healthy lifestyles with a positive impact in the progression of their diseases is fundamental to avoid the appearance of chronic complications or co-morbidities. Only with these assumptions the Innovation on Health Care Technologies will become part of the solution of the sustainability of the Health Care expenditure for the society. This paper present the keys for making the innovation efficient understanding the transversal of the Health Care processes.

  3. Systems Analysis of Technologies for Energy Recovery from Waste. Part I. Gasification followed by Catalytic Combustion, PEM Fuel Cells and Solid Oxide Fuel Cells for Stationary Applications in Comparison with Incineration. Part - II. Catalytic combustion - Experimental part

    Energy Technology Data Exchange (ETDEWEB)

    Assefa, Getachew; Frostell, Bjoern [Royal Inst. of Technology, Stockholm (Sweden). Div. of Industrial Ecology; Jaeraas, Sven; Kusar, Henrik [Royal Inst. of Technology, Stockholm (Sweden). Div. of Chemical Technology

    2005-02-01

    This project is entitled 'Systems Analysis: Energy Recovery from waste, catalytic combustion in comparison with fuel cells and incineration'. Some of the technologies that are currently developed by researchers at the Royal Institute of Technology include catalytic combustion and fuel cells as downstream units in a gasification system. The aim of this project is to assess the energy turnover as well as the potential environmental impacts of biomass/waste-to-energy technologies. In second part of this project economic analyses of the technologies in general and catalytic combustion and fuel cell technologies in particular will be carried out. Four technology scenarios are studied: (1) Gasification followed by Low temperature fuel cells (Proton Exchange Membrane (PEM) fuel cells) (2) Gasification followed by high temperature fuel cells (Solid Oxide Fuel Cells (SOFC) (3) Gasification followed by catalytic combustion and (4) Incineration with energy recovery. The waste used as feedstock is an industrial waste containing parts of household waste, paper waste, wood residues and poly ethene. In the study compensatory district heating is produced by combustion of biofuel. The power used for running the processes in the scenarios will be supplied by the waste-to-energy technologies themselves while compensatory power is assumed to be produced from natural gas. The emissions from the system studied are classified and characterised using methodology from Life Cycle Assessment in to the following environmental impact categories: Global Warming Potential, Acidification Potential, Eutrophication Potential and finally Formation of Photochemical Oxidants. Looking at the result of the four technology chains in terms of the four impact categories with impact per GWh electricity produced as a unit of comparison and from the perspective of the rank each scenario has in all the four impact categories, SOFC appears to be the winner technology followed by PEM and CC as second

  4. The 9. European nuclear conference; La 9. conference nucleaire europeenne

    Energy Technology Data Exchange (ETDEWEB)

    Maurel, V.; Lewis, D.; Smirnov, V.P.; Gutierrez, J.E.; Paulin, Ph.; Markov, D.V.; Smirnov, A.V.; Polenok, V.S.; Horhoianu, G.; Olteanu, G.; Van der Schaaf, B.; Gavillet, D.; Lapena, J.; Ohms, C.; Roth, A.; Van Dyck, St.; Mardon, J.P.; Thomas, A.; Cipiere, M.F.; Faidy, C.; Hedin, F.; Delnondedieu, M.; Chassignole, B.; Doudet, L.; Dupond, O.; Kang, K.; Park, K.; Kim, K.; Ha, J.; Hoon-Seok, Jung; Yong-koo, Lee; Kwang-Ho, Kim; Seungwoo, Paek; Heui-Joo, Choi; Do-Hee, Ahn; Kwang-Rag, Kim; Minsoo, Lee; Sung-Paal, Yim; Hongsuk, Chung; Detroux, P.; Meessen, O.; Defloor, J.; Lars-Erik, Holm; Barescut, J.C.; Vacquier, B.; Laurier, D.; Caer, S.; Quesne, B.; Oudalova, A.; Geras' kin, St.; Dikarev, V.; Dikareva, N.; Chernonog, E.; Yang-Geun, Chung; Gab-Bock, Lee; Sun-Young, Bang; Yong-Sun, Lee; Bolognese-Milsztajn, T.; Frank, D.; Lacoste, V.; Pihet, P.; Lacronique, J.F.; Chauliac, C.; Verwaerde, D.; Pavageau, O.; Zaetta, A.; Varaine, F.; Warin, D.; Hudelot, J.P.; Bioux, Ph.; Klann, R.; Petruzzi, A.; D' auria, F.; Yung Kwon, Jin; Chul Jin, Chol; Mihalache, M.; Radu, V.; Pavelescu, M.; Schneidesch, Ch.R.; Jinzhao, Zhang; Dalleur, J.P.; Nuttin, A.; Meplan, O.; Wilson, J.; Perdu, F.; Campioni, G.; Mounier, C.; Sigrist, J.F.; Laine, Ch.; Broc, D.; Robbe, M.F.; Cariou, Y.; Seok-Kyun, Yoon; Win, Naing; Myung-Hyun, Kim; Kyung, Hee; Fridman, E.; Shwageraus, E.; Galperin, A.; Meplan, O.; Laulan, O.; Mechel-Sendis, F.; Belgaid, M.; Kadem, F.; Amokrane, A.; Hamidouche, T.; El-Khider, Si-Ahmed

    2005-11-15

    This issue gathers the abstracts of the papers presented at the ninth European nuclear conference (ENC-2005). The main part of the conference is split into 20 sessions. These sessions cover all technical aspects of nuclear power, from reactor design to waste management, without forgetting experimental and research reactors, reactor dismantling, economy, resources, safety, radioprotection and education issues. Perspectives of a nuclear renaissance are clearly visible in the world. This renaissance, mainly due to political, economical, societal and ecological factors, is fuelled by scientific and technical progress. This conference was the opportunity to present together these aspects of nuclear power and to analyze their mutual interactions.

  5. Emergent technologies: 25 years

    Science.gov (United States)

    Rising, Hawley K.

    2013-03-01

    This paper will talk about the technologies that have been emerging over the 25 years since the Human Vision and Electronic Imaging conference began that the conference has been a part of, and that have been a part of the conference, and will look at those technologies that are emerging today, such as social networks, haptic technologies, and still emerging imaging technologies, and what we might look at for the future.Twenty-five years is a long time, and it is not without difficulty that we remember what was emerging in the late 1980s. Yet to be developed: The first commercial digital still camera was not yet on the market, although there were hand held electronic cameras. Personal computers were not displaying standardized images, and image quality was not something that could be talked about in a standardized fashion, if only because image compression algorithms were not standardized yet for several years hence. Even further away were any standards for movie compression standards, there was no personal computer even on the horizon which could display them. What became an emergent technology and filled many sessions later, image comparison and search, was not possible, nor the current emerging technology of social networks- the world wide web was still several years away. Printer technology was still devising dithers and image size manipulations which would consume many years, as would scanning technology, and image quality for both was a major issue for dithers and Fourier noise.From these humble beginnings to the current moves that are changing computing and the meaning of both electronic devices and human interaction with them, we will see a course through the changing technology that holds some features constant for many years, while others come and go.

  6. Potential of direct metal deposition technology for manufacturing thick functionally graded coatings and parts for reactors components

    Science.gov (United States)

    Thivillon, L.; Bertrand, Ph.; Laget, B.; Smurov, I.

    2009-03-01

    Direct metal deposition (DMD) is an automated 3D deposition process arising from laser cladding technology with co-axial powder injection to refine or refurbish parts. Recently DMD has been extended to manufacture large-size near-net-shape components. When applied for manufacturing new parts (or their refinement), DMD can provide tailored thermal properties, high corrosion resistance, tailored tribology, multifunctional performance and cost savings due to smart material combinations. In repair (refurbishment) operations, DMD can be applied for parts with a wide variety of geometries and sizes. In contrast to the current tool repair techniques such as tungsten inert gas (TIG), metal inert gas (MIG) and plasma welding, laser cladding technology by DMD offers a well-controlled heat-treated zone due to the high energy density of the laser beam. In addition, this technology may be used for preventative maintenance and design changes/up-grading. One of the advantages of DMD is the possibility to build functionally graded coatings (from 1 mm thickness and higher) and 3D multi-material objects (for example, 100 mm-sized monolithic rectangular) in a single-step manufacturing cycle by using up to 4-channel powder feeder. Approved materials are: Fe (including stainless steel), Ni and Co alloys, (Cu,Ni 10%), WC compounds, TiC compounds. The developed coatings/parts are characterized by low porosity (<1%), fine microstructure, and their microhardness is close to the benchmark value of wrought alloys after thermal treatment (Co-based alloy Stellite, Inox 316L, stainless steel 17-4PH). The intended applications concern cooling elements with complex geometry, friction joints under high temperature and load, light-weight mechanical support structures, hermetic joints, tubes with complex geometry, and tailored inside and outside surface properties, etc.

  7. Conference Hopes

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Annual conference outlines tasks for 2010 to solidify China’s economic recovery through rational investment and increasing consumptionc hina will adhere to a consistent and stable economic strategy, putting in place a proactive fiscal policy and an accommodative monetary policy for the 2010 fiscal year-the macro-economic course mapped out during China’s Central

  8. Conference proceedings

    African Journals Online (AJOL)

    abp

    2015-08-07

    Aug 7, 2015 ... African epidemiological association and 1st conference of the Cameroon society of ... International Reference Centre (CIRCB) for research on HIV/AIDS prevention and .... interests (third line regimens, clinical trials and HIV functional cure). ... sharing. Regarding Mycobacterium Tuberculosis, the efficacy of.

  9. Revitalize the US silicon/ferrosilicon industry through energy-efficient technology. Part 1, Final report

    Energy Technology Data Exchange (ETDEWEB)

    Larson, H.R.; Welborn, J.H.

    1995-02-01

    It is concluded that silicon metal and ferrosilicon can be very effectively produced in a DC submerged arc furnace. Specific energy consumption factors measured were favorable to the technology. Significant energy savings over conventional AC practice are likely. Hollow electrode feeding of the furnace does not appear feasible. Electrode consumption was 0.144 lbs/lb so silicon while making metal, much of which occurred above the burden pile. Silicon loss to fume averaged 19.5% of the silicon charge. In this furnace, 50% FeSi was more difficult to produce than silicon metal, and the furnace could not be run with full burden; it was operated successfully about 3/4 full. In the silicon metal portion, the furnace was operated in a fully submerged mode for several 3-day test campaigns. The industry must seriously consider the identified benefits of DC plasma arc technology for retrofit or new added silicon capacity.

  10. PREFACE: 1982 International Conference on Plasma Physics

    Science.gov (United States)

    Wilhelmsson, Hans

    1982-01-01

    Invited Papers: The Physics of Hot Plasmas During the last decade a dramatic evolution of plasma physics has occurred. Not only have gigantic fusion plasma machines been planned, and are now being built, and elaborate spaceships and antenna systems been constructed to explore remote parts of the cosmos; new observations have revealed fascinating structures in space, ranging from pulsar plasmas under extreme conditions in very strong magnetic fields to large-scale magnetic field and electric current systems in cosmic plasmas. X-rays from very distant sources as well as radio-waves from the plasma in the magnetosphere and in the Aurora have recently been studied with new observational techniques. Ingenious laboratory experiments are continuously being carried out to exploit new fundamental processes in plasmas. These are of great interest for the basic understanding of plasmas and also have immediate consequences for applications, like plasma heating and diagnostics. The theoretical description of new plasma phenomena, and of the plasma state in general poses challenging problems, particularly in situations where high concentration of energy is located in the plasmas. Nonlinear wave analysis and turbulence theory have accordingly been extensively developed to describe in particular the collective plasma phenomena. New concepts have been envisaged like plasma solitons, which may be thought of as excitations of local concentrations of longitudinal plasma waves which turn out to be particularly stable. More and more sophisticated structures of nonlinear nature are being revealed by means of high capacity computer facilities. Simulation experiments allow for studies of chaotic behaviour of plasma particles. Related fields of activity form new trends in the development of plasma theory. The programme of the 1982 International Conference on Plasma Physics, which was held in Göteborg, Sweden, stressed the role of the Physics of Hot Plasmas. Studies of such plasmas are

  11. MECHANICAL PROPERTIES OF PARTS OF MEDICAL PRODUCTS PRODUCED USING ADDITIVE MANUFACTURING TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Filip Górski

    2017-06-01

    Full Text Available The paper presents results of tests conducted on the elements of medical devices - slings used with medical lifts - manufactured using additive technologies. Project assumptions were: to produce 100 samples of clips with varying design, material and orientation parameter. Samples were manufactured using FDM and SLA processes and then tested for mechanical strength, load transmission and functionality, using certified equipment. Paper shows full methodology and obtained test results.

  12. Devising an energy saving technology for a biogas plant as a part of the cogeneration system

    OpenAIRE

    Чайковська, Євгенія Євстафіївна

    2015-01-01

    The paper suggests an operation technology for a biogas plant that allows setting a heating medium temperature at the inlet to the heat exchanger built in a digester and measuring the heating medium temperature at the outlet. An integrated system for assessing the varied temperature of digestion (that is based on mathematical and logical modeling within the cogeneration system) secures a continuous gas outlet, a timely unloading of fermented mash and loading of a fresh matter. For this purpos...

  13. Heat pumps and technological development: Civil use in 80's (1st part)

    Energy Technology Data Exchange (ETDEWEB)

    Lazzarin, R. (Bari Univ. (Italy). Ist. di Fisica Tecnica ed Impianti Termotecnici)

    1990-09-01

    This article analyses the technological development of heat pumps for civil purposes. These devices belong to the big family of heat pumps: electrical compression devices, thermally driven machines, adsorption machines, internal and external combustion engines. Electrical heat pumps saw an interesting development in their components, particularly in the compressor (with the adoption of screw and scroll compressors) and in the thermal exchange batteries, without forgetting the progress in electronics, from the setting to the expansion valve and the defrosting system.

  14. Technology Development Road for Chemical Fiber Industry in Ghina [Part Two

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ Ⅲ.Technology development direction for China's chemical fiber industry in the"11th Five-year Plan" period and the longer run Presently,China's chemical fiber industry is in a critical period for development,or important transition period.Fully implement and fulfill the "'scientific development concept"put forward by the nation,and take a sustainable development road.The growth model of chemical fiber industry must undergo fundamental transformation from "quantitative"development into "qualitative" development.

  15. 汽车零部件的清洗技术%Vehicle Parts Cleaning Technology

    Institute of Scientific and Technical Information of China (English)

    刘丽

    2013-01-01

      汽车零部件的清洗是汽车零部件的生产工艺过程的一个重要组成部份,主要介绍了清洗的目的不仅是外观装饰的需要,更重要的是确保和提高产品质量的需要。化学清洗是汽车零部件的清洗中应用最广泛、使用最方便、效果最理想、成本低廉的一种方法。%Vehicle parts cleaning were introduced in this paper is the production of vehicle parts is one of the most important link, is the pro⁃duction process is an important part of. The purpose of cleaning is not only the need of decorated appearance, more important is to ensure and improve product quality. In the industrial developed countries, the cleanliness and precision and smooth finish in same position. Chemical cleaning is the most widely used in vehicle parts cleaning, use the most convenient, effect ideal, a method of low cost. Cleaning mechaniza⁃tion, automation, to improve the cleaning effect and save energy, reduce costs, shorten time has obvious practical significance.

  16. TBI-ROC Part Seven: Traumatic Brain Injury--Technologies to Support Memory and Cognition

    Science.gov (United States)

    Scherer, Marcia; Elias, Eileen; Weider, Katie

    2010-01-01

    This article is the seventh of a multi-part series on traumatic brain injury (TBI). The six earlier articles in this series have discussed the individualized nature of TBI and its consequences, the rehabilitation continuum, and interventions at various points along the continuum. As noted throughout the articles, many individuals with TBI…

  17. Teaching for Engagement: Part 2: Technology in the Service of Active Learning

    Science.gov (United States)

    Hunter, William J.

    2015-01-01

    In the first piece in this series ("Teaching for Engagement: Part 1: Constructivist Principles, Case-Based Teaching, and Active Learning"), William Hunter sought to make the case that a wide range of teaching methods (e.g., case-based teaching, problem-based learning, anchored instruction) that share an intellectual grounding in…

  18. TBI-ROC Part Seven: Traumatic Brain Injury--Technologies to Support Memory and Cognition

    Science.gov (United States)

    Scherer, Marcia; Elias, Eileen; Weider, Katie

    2010-01-01

    This article is the seventh of a multi-part series on traumatic brain injury (TBI). The six earlier articles in this series have discussed the individualized nature of TBI and its consequences, the rehabilitation continuum, and interventions at various points along the continuum. As noted throughout the articles, many individuals with TBI…

  19. Biotechnology and genetic engineering in the new drug development. Part I. DNA technology and recombinant proteins.

    Science.gov (United States)

    Stryjewska, Agnieszka; Kiepura, Katarzyna; Librowski, Tadeusz; Lochyński, Stanisław

    2013-01-01

    Pharmaceutical biotechnology has a long tradition and is rooted in the last century, first exemplified by penicillin and streptomycin as low molecular weight biosynthetic compounds. Today, pharmaceutical biotechnology still has its fundamentals in fermentation and bioprocessing, but the paradigmatic change affected by biotechnology and pharmaceutical sciences has led to an updated definition. The biotechnology revolution redrew the research, development, production and even marketing processes of drugs. Powerful new instruments and biotechnology related scientific disciplines (genomics, proteomics) make it possible to examine and exploit the behavior of proteins and molecules. Recombinant DNA (rDNA) technologies (genetic, protein, and metabolic engineering) allow the production of a wide range of peptides, proteins, and biochemicals from naturally nonproducing cells. This technology, now approximately 25 years old, is becoming one of the most important technologies developed in the 20(th) century. Pharmaceutical products and industrial enzymes were the first biotech products on the world market made by means of rDNA. Despite important advances regarding rDNA applications in mammalian cells, yeasts still represent attractive hosts for the production of heterologous proteins. In this review we describe these processes.

  20. Banana Bark as A Part of Acoustic Design Unit by Hybrid Technology Application

    Directory of Open Access Journals (Sweden)

    Maharani Dian Permanasari

    2014-10-01

    Full Text Available Abstract. Banana bark is one of tropical indigenous natural resources that can be used as main material for many products. Being a fast-growing renewable material, it is durable and has natural patterns that people find visually attractive. Naturally, its textures and patterns are its main values; therefore it has the potential to be developed further. This research is needed to optimize the growth of small craft industries of banana bark, including the community where production activities take place, and also to provide information or reference of banana bark utilizations. Previous experiments conclude that banana bark has porous structure, high flexibility, relatively water-resistant due to its natural wax coating that resists water droplets, unless being washed down immensely. Also, due to its softwood- and paper-like properties, ithas many possibilities to be formed and processed into various functional products, mostly as craft products. In the subsequent study, the research about the utilization of banana bark in small industries starting from the harvesting system, handling problems in raw material supply, applying proper technology in improving the material’s quality, improving the human-resource working culture by appropriate technologies, and also innovating the product’s designs. The recommended designs can be implemented to improve the performance and qualities of banana bark products.Keywords: applied technology; banana bark; renewable materials; design; sustainability.