WorldWideScience

Sample records for technology compact excimer

  1. Excimer Laser Technology

    CERN Document Server

    Basting, Dirk

    2005-01-01

    This comprehensive survey on Excimer Lasers investigates the current range of the technology, applications and devices of this commonly used laser source, as well as the future of new technologies, such as F2 laser technology. Additional chapters on optics, devices and laser systems complete this compact handbook. A must read for laser technology students, process application researchers, engineers or anyone interested in excimer laser technology. An effective and understandable introduction to the current and future status of excimer laser technology.

  2. Compact excimer laser light source for optical (mask) inspection systems

    Science.gov (United States)

    Pflanz, Tobias; Huber, Heinz

    2001-04-01

    The discharge pumped excimer laser is a gas laser providing ultra violet radiation with well defined spectral, temporal and spatial properties. The fast development of excimer lasers in recent years has succeeded in designing very compact, turn-key systems delivering up to 10 W of radiation at 248 nm (5 W at 193 nm and 1 W at 157 nm) with repetition rates up to 1000 Hz. Experimental data on important beam properties of excimer lasers in the field of mask inspection are being presented and discussed. Relevant parameters are spectral bandwidth, energetic pulse-to-pulse stability, pulse duration, beam pointing stability, beam direction stability, beam dimension, beam profile and coherence. We will compare the excimer laser with lamp sources and continuous wave lasers in the framework of these parameters. The discussion will show future opportunities of compact excimer lasers in optical inspection as well as in mask writing systems, improving resolution and throughput.

  3. Overview on the high power excimer laser technology

    Science.gov (United States)

    Liu, Jingru

    2013-05-01

    High power excimer laser has essential applications in the fields of high energy density physics, inertial fusion energy and industry owing to its advantages such as short wavelength, high gain, wide bandwidth, energy scalable and repetition operating ability. This overview is aimed at an introduction and evaluation of enormous endeavor of the international high power excimer laser community in the last 30 years. The main technologies of high power excimer laser are reviewed, which include the pumping source technology, angular multiplexing and pulse compressing, beam-smoothing and homogenous irradiation, high efficiency and repetitive operation et al. A high power XeCl laser system developed in NINT of China is described in detail.

  4. High-repetition-rate compact excimer laser: UV light source for metrology, inspection, direct writing, and material testing

    Science.gov (United States)

    Huber, Heinz P.; Pflanz, Tobias; Goertler, Andreas; Schillinger, Helmut

    2003-06-01

    The discharge pumped excimer laser is a gas laser providing ultra violet (UV) radiation with well defined spectral, temporal and spatial properties. The fast development of excimer lasers in recent years has succeeded in designing very compact, table-top and turn-key systems delivering up to 20 W of radiation at 248 nm, 10 W at 193 nm and 2 W at 157 nm with repetition rates up to 2000 Hz (1, 5). Due to their short emission wavelength and compactness they are continuously replacing other light sources, like lamps and ion lasers, in applications as metrology, inspection, direct writing and material testing. Spatial and temporal beam properties of compact excimer lasers are very suitable to be utilized as illumination source in these applications. The compact excimer laser is combining the advantages of both, lamp and laser sources. It displays low temporal and spatial coherence, but has a narrow spectral emission range of a few hundred pm. The beam area is approximately 1/2 cm2, the divergence is in the order of 1 mrad. Variation of beam position and beam direction are negligible for most illumination applications. Compact excimer lasers are easy to integrate in measurement and inspection systems. Typically their footprint area is 0.25 m2. The power consumption is less than 1 kW, enabling single phase electrical supply and air cooling. State-of-the-art compact excimer lasers are compliant to all relevant SEMI regulations. The laser optics exceeds the life time of the laser tube, thus no optics cleaning and exchange is necessary in a whole life time of a laser tube of a few billion pulses (6).

  5. Development of a compact and reliable repetitively pulsed Xe Cl (308 nm) excimer laser

    Indian Academy of Sciences (India)

    N S Benerji; N Varshnay; J K Mittal

    2013-02-01

    Development and operation characteristics of a repetitively pulsed UV spark pre-ionized XeCl(Xenon Chloride) excimer laser is described. The laser uses discharge pumped C–C charge transfer excitation. A compact gas circulation loop was adopted to achieve high repetition rate operation. The laser generates optical pulses of energy 150 mJ at 150 Hz reliably. The electrical to optical conversion efficiency obtained is 1%. The laser pulse duration is ∼8 nS (FWHM). The single fill gas lifetime have been found to be 2 × 106 shots for 20% reduction of energy without any halogen injection. The system is compact and reliable.

  6. High Impact Technology Compact Combustion (HITCC) Compact Core Technologies

    Science.gov (United States)

    2016-01-01

    the CO and CO2 net reaction rates from the FGM. This, in turn, provides another benefit . That is, the source term in YC is not just now dependent on...AFRL-RQ-WP-TR-2016-0010 HIGH IMPACT TECHNOLOGY COMPACT COMBUSTION (HITCC) COMPACT CORE TECHNOLOGIES Andrew W. Caswell Combustion...information exchange, and its publication does not constitute the Government’s approval or disapproval of its ideas or findings. *Disseminated

  7. Advanced excimer laser technologies enable green semiconductor manufacturing

    Science.gov (United States)

    Fukuda, Hitomi; Yoo, Youngsun; Minegishi, Yuji; Hisanaga, Naoto; Enami, Tatsuo

    2014-03-01

    "Green" has fast become an important and pervasive topic throughout many industries worldwide. Many companies, especially in the manufacturing industries, have taken steps to integrate green initiatives into their high-level corporate strategies. Governments have also been active in implementing various initiatives designed to increase corporate responsibility and accountability towards environmental issues. In the semiconductor manufacturing industry, there are growing concerns over future environmental impact as enormous fabs expand and new generation of equipments become larger and more powerful. To address these concerns, Gigaphoton has implemented various green initiatives for many years under the EcoPhoton™ program. The objective of this program is to drive innovations in technology and services that enable manufacturers to significantly reduce both the financial and environmental "green cost" of laser operations in high-volume manufacturing environment (HVM) - primarily focusing on electricity, gas and heat management costs. One example of such innovation is Gigaphoton's Injection-Lock system, which reduces electricity and gas utilization costs of the laser by up to 50%. Furthermore, to support the industry's transition from 300mm to the next generation 450mm wafers, technologies are being developed to create lasers that offer double the output power from 60W to 120W, but reducing electricity and gas consumption by another 50%. This means that the efficiency of lasers can be improve by up to 4 times in 450mm wafer production environments. Other future innovations include the introduction of totally Heliumfree Excimer lasers that utilize Nitrogen gas as its replacement for optical module purging. This paper discusses these and other innovations by Gigaphoton to enable green manufacturing.

  8. Single photon ionization (SPI) via incoherent VUV-excimer light: robust and compact time-of-flight mass spectrometer for on-line, real-time process gas analysis.

    Science.gov (United States)

    Mühlberger, F; Wieser, J; Ulrich, A; Zimmermann, R

    2002-08-01

    Fast on-line detection of organic compounds from complex mixtures, such as industrial process gas streams, require selective and sensitive analytical methods. One feasible approach for this purpose is the use of mass spectrometry (MS) with a selective and soft (fragment-free) ionization technique, such as chemical ionization (CI) or photo ionization (PI). Single photon ionization (SPI) with vacuum ultraviolet (VUV) light is a particularly sof tionization technique, well-suited for detection of both aromatic and aliphatic species. Problematic, however, is the generation of the VUV light. In general, the vacuum ultraviolet (VUV) light sources for SPI-MS are based either on lasers (e.g., 118-nm radiation generated by frequency-tripling of the third harmonic of a Nd:YAG laser) or on conventional VUV lamps, such as deuterium lamps. Althoughthe laser-based techniques are very sophisticated and expensive, the conventional lamps have serious drawbacks regarding their optical parameters, such as low-output power, low spectral power density, and broad emission bands. In this work, a novel excimer VUV light source, in which an electron beam is used to form rare gas excimer species, is used. The excimer VUV light sourceproduces brilliant and intense VUV light. The novel VUV light source was coupled to a compact and mobile time-of-flight mass spectrometer (TOFMS). A special interface design, including optical (VUV optics) as well as electronic measures (e.g., pulsed ion extraction) was realized. The use of the excimer VUV lamp for SPI will allow the realization of very compact, rugged, and sensitive SPI-TOFMS devices, which preferably will be adapted for process analytical application or monitoring issues (e.g., chemical warfare detection). The excimer VUV-lamp technology delivers VUV light with a good beam quality and high-output power at low costs. Furthermore, it allows changing the emitted wavelength as well as the bandwidth of the excimer VUV lamp in t he 100-200-nm region

  9. Technology Selections for Cylindrical Compact Fabrication

    Energy Technology Data Exchange (ETDEWEB)

    Jeffrey A. Phillips

    2010-10-01

    A variety of process approaches are available and have been used historically for manufacture of cylindrical fuel compacts. The jet milling, fluid bed overcoating, and hot press compacting approach being adopted in the U.S. AGR Fuel Development Program for scale-up of the compacting process involves significant paradigm shifts from historical approaches. New methods are being pursued because of distinct advantages in simplicity, yield, and elimination of process mixed waste. Recent advances in jet milling technology allow simplified dry matrix powder preparation. The matrix preparation method is well matched with patented fluid bed powder overcoating technology recently developed for the pharmaceutical industry and directly usable for high density fuel particle matrix overcoating. High density overcoating places fuel particles as close as possible to their final position in the compact and is matched with hot press compacting which fully fluidizes matrix resin to achieve die fill at low compacting pressures and without matrix end caps. Overall the revised methodology provides a simpler process that should provide very high yields, improve homogeneity, further reduce defect fractions, eliminate intermediate grading and QC steps, and allow further increases in fuel packing fractions.

  10. Single application on iris localization technology in excimer laser for astigmatism

    Directory of Open Access Journals (Sweden)

    Jun-Hua Hao

    2014-06-01

    Full Text Available AIM:To discuss the single application on iris localization technology in excimer laser for the treatment of astigmatism. METHODS:Totally 203 cases(406 eyesof laser in situ keratomileusis(LASIKin the treatment of compound myopic astigmatism patients were operated from November 2011 to November 2012 in our hospital. They were divided into two groups. One was observation group using iris localization and the other was control group using routine operation. Patients in the observation group of 100 cases(200 eyes, aged 18-43 years old, spherical diopter was -1.25 to -8.75D, astigmatism was -1.0 to -3.25D. In control group, 103 patients(206 eyes, aged 19-44 years old, spherical diopter was -1.75-9.50D, astigmatism was -1.0 to -3.25D. The patients in the observation group before the application of WaveScan aberrometer check for iris image, spherical lens, cylindrical lens and astigmatism axis data operation, only single application of iris location, without using wavefront aberration guided technology, laser cutting patterns for conventional LASIK model, spherical, cylindrical mirror and astigmatism axis data source to preoperative wavefront aberration results. The control group received routine LASIK. It was applicated comprehensive optometry optometry respectively to examine astigmatism and axial, based on the computer analysis during the preoperative, 1wk after the operation, and 6mo. Analysis of using SPSS 17 statistical software, it was independent-sample t test between the two groups of residual astigmatism and astigmatism axis. RESULTS:Postoperative residual astigmatism, the observation group was significantly better than the control group. Astigmatism axial measurement after operation, the observation group was significantly less than that of the control group. Postoperative visual acuity at 6mo, the observation group was better than that of the control group. The difference was statistically significant. CONCLUSION: For patients who cannot

  11. Production excimer laser equipment overview

    Science.gov (United States)

    Sercel, Jeffrey P.

    1993-04-01

    Excimer lasers were commercialized in the late 1970's. The laser community thought that by the early 1980's these UV lasers would enjoy a fruitful industrial market position. CO2 and solid state lasers required almost two decades to be fully accepted as industrial machine while the excimer laser was expected to be a fast learner benefiting from the learning curve of its big brothers. In retrospect, early excimer lasers had a bad reputation for being complicated, expensive and frequently out of commission. By the late 1980's a few excimer laser manufacturers had engineered the problems to acceptable levels for successful pilot lines and small scale manufacturing to begin. At this time, the real industrial learning curves began as engineers worked to refine many subsystems and support technologies. Today, excimer lasers are being used as true industrial lasers. They have a bright future with numerous and diverse market opportunities. This paper is an overview of the technologies proven to be successful in adapting modern excimer lasers to successful full production situations.

  12. Compact ultrafast orthogonal acceleration time-of-flight mass spectrometer for on-line gas analysis by electron impact ionization and soft single photon ionization using an electron beam pumped rare gas excimer lamp as VUV-light source.

    Science.gov (United States)

    Mühlberger, F; Saraji-Bozorgzad, M; Gonin, M; Fuhrer, K; Zimmermann, R

    2007-11-01

    Orthogonal acceleration time-of-flight mass spectrometers (oaTOFMS), which are exhibiting a pulsed orthogonal extraction of ion bunches into the TOF mass analyzer from a continuous primary ion beam, are well-suited for continuous ionization methods such as electron impact ionization (EI). Recently an electron beam pumped rare gas excimer lamp (EBEL) was introduced, which emits intensive vacuum UV (VUV) radiation at, e.g., 126 nm (argon excimer) and is well suited as the light source for soft single photon ionization (SPI) of organic molecules. In this paper, a new compact oaTOFMS system which allows switching between SPI, using VUV-light from an EBEL-light source, and conventional EI is described. With the oaTOFMS system, EBEL-SPI and EI mass spectral transients can be recorded at very high repetition rates (up to 100 kHz), enabling high duty cycles and therefore good detection efficiencies. By using a transient recorder card with the capability to perform on-board accumulation of the oaTOF transients, final mass spectra with a dynamic range of 106 can be saved to the hard disk at a rate of 10 Hz. As it is possible to change the ionization modes (EI and SPI) rapidly, a comprehensive monitoring of complex gases with highly dynamic compositions, such as cigarette smoke, is possible. In this context, the EI based mass spectra address the bulk composition (compounds such as water, oxygen, carbon dioxide, etc. in the up to percentage concentration range) as well as some inorganic trace gases such as argon, sulfur dioxide, etc. down to the low ppm level. The EBEL-SPI mass spectra on the other hand are revealing the organic composition down to the lower ppb concentration range.

  13. Compact Gamma-ray Source Technology Development Study

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, S G; Gibson, D J; Rusnak, B

    2009-09-25

    This study focuses on the applicability of current accelerator and laser technologies to the construction of compact, narrow bandwidth, gamma-ray sources for DHS missions in illicit materials detection. It also identifies research and development areas in which advancement will directly benefit these light sources. In particular, we review the physics of Compton scattering based light sources and emphasize the source properties most important to Nuclear Resonance Fluorescence (NRF) applications of interest. The influences of laser and electron beam properties on the light source are examined in order to evaluate the utility of different technologies for this application. Applicable bulk and fiber-based laser systems and laser recirculation technologies are discussed and Radio Frequency (RF) Linear Accelerator (linac) technologies are examined to determine the optimal frequency and pulse formats achievable.

  14. Excimer lamp stereolithography

    Science.gov (United States)

    Satoh, Saburoh; Tanaka, Takao; Ihara, Satoshi; Yamabe, Chobei

    2000-06-01

    For the laser stereo-lithography, a XeCl excimer lamp with cylindrical tube has been adopted to achieve a lower cost type UV light source. Because of excellent high output efficiency, it is possible to be down sizing of a power supplier and a lamp head and to be air-cooling. And moreover to extract the maximum output power and efficiency, we applied an optical fiber system for its lithography optics. With this excimer lamp the maximum UV emission per pulse 25 (mu) J at 100 Hz and the maximum average power 10 mW at 1000 Hz were obtained.

  15. Excimer laser annealing for low-voltage power MOSFET

    Science.gov (United States)

    Chen, Yi; Okada, Tatsuya; Noguchi, Takashi; Mazzamuto, Fulvio; Huet, Karim

    2016-08-01

    Excimer laser annealing of lumped beam was performed to form the P-base junction for high-performance low-voltage-power MOSFET. An equivalent shallow-junction structure for the P-base junction with a uniform impurity distribution is realized by adopting excimer laser annealing (ELA). The impurity distribution in the P-base junction can be controlled precisely by the irradiated pulse energy density and the number of shots of excimer laser. High impurity activation for the shallow junction has been confirmed in the melted phase. The application of the laser annealing technology in the fabrication process of a practical low-voltage trench gate MOSFET was also examined.

  16. Cell Analysis System Based on Compact Disk Technology

    NARCIS (Netherlands)

    Tibbe, Arjan G.J.; de Grooth, B.G.; Greve, Jan; Rao, Chandra; Dolan, Gerald J.; Terstappen, Leonardus Wendelinus Mathias Marie

    2002-01-01

    Background: A cell analysis system was developed to enumerate and differentiate magnetically aligned cells selected from whole blood. The cellular information extracted is similar to the readout of musical information from a compact disk (CD). Here we describe the optical design and data processing

  17. Field Assessment and Specification Review for Roller-Integrated Compaction Monitoring Technologies

    Directory of Open Access Journals (Sweden)

    David J. White

    2011-01-01

    Full Text Available Roller-integrated compaction monitoring (RICM technologies provide virtually 100-percent coverage of compacted areas with real-time display of the compaction measurement values. Although a few countries have developed quality control (QC and quality assurance (QA specifications, broader implementation of these technologies into earthwork construction operations still requires a thorough understanding of relationships between RICM values and traditional in situ point test measurements. The purpose of this paper is to provide: (a an overview of two technologies, namely, compaction meter value (CMV and machine drive power (MDP; (b a comprehensive review of field assessment studies, (c an overview of factors influencing statistical correlations, (d modeling for visualization and characterization of spatial nonuniformity; and (e a brief review of the current specifications.

  18. Silicon technology compatible photonic molecules for compact optical signal processing

    Energy Technology Data Exchange (ETDEWEB)

    Barea, Luis A. M., E-mail: barea@ifi.unicamp.br; Vallini, Felipe; Jarschel, Paulo F.; Frateschi, Newton C. [Device Research Laboratory, Applied Physics Department, “GlebWataghin” Physics Institute, University of Campinas–UNICAMP, 13083-859 Campinas, SP (Brazil)

    2013-11-11

    Photonic molecules (PMs) based on multiple inner coupled microring resonators allow to surpass the fundamental constraint between the total quality factor (Q{sub T}), free spectral range (FSR), and resonator size. In this work, we use a PM that presents doublets and triplets resonance splitting, all with high Q{sub T}. We demonstrate the use of the doublet splitting for 34.2 GHz signal extraction by filtering the sidebands of a modulated optical signal. We also demonstrate that very compact optical modulators operating 2.75 times beyond its resonator linewidth limit may be obtained using the PM triplet splitting, with separation of ∼55 GHz.

  19. High-intensity sources of incoherent UV and VUV excimer radiation for low-temperature materials processing

    Science.gov (United States)

    Kogelschatz, U.; Esrom, H.; Zhang, J.-Y.; Boyd, I. W.

    2000-12-01

    The principles and properties of ultraviolet (UV) and vacuum ultraviolet (VUV) radiation generated by decaying excimer complexes are discussed. Excimer lamps offer high-intensity narrow-band radiation at various UV and VUV wavelengths and reach high efficiencies. They can provide high photon fluxes over extended areas. The use of excimers offers several advantages: excimers can be extremely efficient energy converters transforming electron kinetic energy into UV radiation. No self-absorption is observed in excimer systems. In most cases, excimer forming gas mixtures exhibit one dominant narrow emission band. Excimer systems can be pumped at extremely high power densities before saturation effects start to limit the spontaneous emission. Thus, extremely bright UV and VUV sources can be built. Different types of excimer lamps can be fabricated utilising, repetitively pulsed high power discharges, microwave discharges and dielectric-barrier discharges (silent discharges). For large-scale industrial applications dielectric-barrier discharges using fairly simple discharge configurations currently represent the most mature excimer lamp technology. Recent applications of excimer lamps include photo-deposition of large area or patterned thin metal films, of high- and low-dielectric constant insulating layers, photo-assisted low-temperature oxidation of Si, SiGe and Ge, UV curing, polymer etching and microstructuring of polymer surfaces. Applications investigated so far clearly demonstrate that low cost, high power excimer lamp systems can provide an interesting alternative to excimer lasers for industrial large-scale low-temperature materials processing.

  20. Workshop on compact storage ring technology: applications to lithography

    Energy Technology Data Exchange (ETDEWEB)

    1986-05-30

    Project planning in the area of x-ray lithography is discussed. Three technologies that are emphasized are the light source, the lithographic technology, and masking technology. The needs of the semiconductor industry in the lithography area during the next decade are discussed, particularly as regards large scale production of high density dynamic random access memory devices. Storage ring parameters and an overall exposure tool for x-ray lithography are addressed. Competition in this area of technology from Germany and Japan is discussed briefly. The design of a storage ring is considered, including lattice design, magnets, and beam injection systems. (LEW)

  1. Dynamic compaction treatment technology research of red clay soil embankment in southern mountains

    Institute of Scientific and Technical Information of China (English)

    刘建华; 袁剑波; 熊虎; 陈伟

    2008-01-01

    High liquid limit soil generally adopted in expressway embankment construction of southern mountains, which often expresses some characteristics including high moisture content, high porosity ratio, low permeability, high compressibility, certain disintegration, and so on. Spring soil phenomenon and inhomogeneous compaction have effects on the quality of embankment construction, just because the water in soil is difficult to evaporate. Based on the study of reinforcement mechanism for high liquid limit soil, in situ tests for dynamic compaction treatment in Yizhang-Fengtouling expressway embankment were developed. The reliable and economical dynamic compaction treatment methods and the construction technology for large range high liquid limit soil embankment in southern mountains expressway were discussed. In the process, convenient measurement methods were adopted to evaluate the treatment effects. The test results show that the dynamic compaction method has good treatment effects on the local red clay embankment. The embankment compaction degree is improved with compactness coming to 90% around tamping pits and compactness over 95% in tamping pits interior after tamping. The bearing capacity, the physical mechanic-property and the shear strength for soil are obviously improved, which are enhanced with cohesive strength increasing over 10 kPa and compression modulus increasing over 3 MPa.

  2. DEVELOPMENT OF RHEOLOGY OF ROAD-BUILDING MATERIALS FOR PERFECTION OF THEIR COMPACTION TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Vl. P. Podolskу

    2012-04-01

    Full Text Available Problem statement. The main problems of improving the quality and effectiveness of compaction of soil subgrade and road asphalt mixtures are discussed. Technology of road-building materials compaction can be improved by developing and using the rheological approach in the describing and studying changes in physical and mechanical parameters of materials, when the rheological properties of compacted material is closely connected to the nature of a force action applied to it.Results. The principles of designing rheological models of soil subgrade and road asphalt mixtures are formulated, based on which a model is suggested of the creep process of road construction materials using the theory of hereditary creep of elastic-visco-plastic materials. The choice of exponential and power influence functions is explained, the application of which will improve the accuracy of the physical and mechanical properties of compacted materials. Conclusions. Development of rheology road soils and asphalt mixtures reveals significant new laws in the development of deformation of compacted layers of road construction materials in the way of improving the compaction technology.

  3. Barriers to Technology Diffusion: The Case of Compact Fluorescent Lamps

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    Despite its considerable potential in household, domestic and industry sectors, the possible contribution of solar heat is often neglected in many academic and institutional energy projections and scenarios. This is best explained by the frequent failure to distinguish heat and work as two different forms of energy transfers. As a result, policy makers in many countries or States have tended to pay lesser attention to solar thermal technologies than to other renewable energy technologies.

  4. Development of a manufacturing technology of compacted graphite iron castings from a cupola furnace

    Directory of Open Access Journals (Sweden)

    O. Bouska

    2012-01-01

    Full Text Available Compacted graphite iron, also known as vermicular cast iron or semiductile cast iron is a modern material, the production of which is increasing globaly. Recently this material has been very often used in automotive industry. This paper reviews some findigs gained during the development of the manufacturing technology of compacted graphite iron under the conditions in Slévárna Heunisch Brno, Ltd. The new technology assumes usage of cupola furnace for melting and is beeing developed for production of castings weighing up to 300 kilograms poured into bentonite sand moulds.

  5. The Excimer Laser: Its Impact on Science and Industry

    Science.gov (United States)

    Basting, Dirk

    2010-03-01

    After the laser was demonstrated in 1960, 15 years were required to develop a practical method for extending laser emission into the UV: the Excimer laser. This historical review will describe the challenges with the new medium and provide an insight into the technological achievements. In the transition from Science to Industry it will be shown how start-ups successfully commercialized laboratory prototypes. The pioneers in this rapidly expanding field will be identified and the influence of government-funded research as well as the role of venture capital will be discussed. In scientific applications, the fields of photochemistry and material research were particularly stimulated by the advent of a reliable UV light source. Numerous industrial applications and worldwide research in novel applications were fueled In the early and mid 80's by progress in excimer laser performance and technology. The discovery of ablative photocomposition of polymer materials by Srinivasan at IBM opened the door to a multitude of important excimer applications. Micromachining with extreme precision with an excimer laser enabled the success of the inkjet printer business. Biological materials such as the human cornea can also be ``machined'' at 193nm, as proposed in 1983 by Trokel and Srinivasan. This provided the foundation of a new medical technology and an industry relying on the excimer laser to perform refractive surgery to correct vision Today, by far the largest use of the excimer laser is in photolithography to manufacture semiconductor chips, an application discovered by Jain at IBM in the early 80's. Moore's law of shrinking the size of the structure to multiply the number of transistors on a chip could not have held true for so long without the deep UV excimer laser as a light source. The presentation will conclude with comments on the most recent applications and latest market trends.

  6. Compact, energy EFFICIENT neutron source: enabling technology for various applications

    Energy Technology Data Exchange (ETDEWEB)

    Hershcovitch, A.; Roser, T.

    2009-12-01

    A novel neutron source comprising of a deuterium beam (energy of about 100 KeV) injected into a tube filled with tritium gas and/or tritium plasma that generates D-T fusion reactions, whose products are 14.06 MeV neutrons and 3.52 MeV alpha particles, is described. At the opposite end of the tube, the energy of deuterium ions that did not interact is recovered. Beryllium walls of proper thickness can be utilized to absorb 14 MeV neutrons and release 2-3 low energy neutrons. Each ion source and tube forms a module. Larger systems can be formed from multiple units. Unlike currently proposed methods, where accelerator-based neutron sources are very expensive, large, and require large amounts of power for operation, this neutron source is compact, inexpensive, easy to test and to scale up. Among possible applications for this neutron source concept are sub-critical nuclear breeder reactors and transmutation of radioactive waste.

  7. Excimer laser pretreatment and metallization of polymers

    Science.gov (United States)

    Horn, H.; Beil, S.; Wesner, D. A.; Weichenhain, R.; Kreutz, E. W.

    1999-05-01

    Metal/polymer adhesion is a crucial factor of many applications in microelectronic or microsystem technologies. It depends on chemical and structural properties of the interface, often involving just a few atomic layers. Adhesion can be influenced by various pretreatments prior to metal deposition, e.g. thermal treatment, chemical etching or exposure to reactive plasmas. Irradiation with pulsed UV-laser radiation and or UV-excimer lamps can also affect adhesion and offers several technical advantages, among them area selective pretreatment and subsequent metallization. The pretreatment of polymer surfaces by UV-radiation is investigated as an alternative technique to common wet chemical, plasma or other pretreatment methods. Chemical and morphological changes in the polymer surface are investigated with poly(butylene terephthalate) (PBT) as a model substance, containing UV-absorbing (aromatic) chromophoric groups. Chemical changes in the surface are investigated via X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FTIR). Analysis of the morphological changes in the polymer surface is done via optical microscopy and scanning electron microscopy (SEM). The metallization of polymers pretreated by excimer laser radiation is performed via electroless plating of nickel followed by electrolytically deposited copper. The influence of excimer laser irradiation of the polymer on the adhesion of the metal overlayers is measured by tape and peel tests.

  8. Microhollow cathode discharge excimer lamps

    Science.gov (United States)

    Schoenbach, Karl H.; El-Habachi, Ahmed; Moselhy, Mohamed M.; Shi, Wenhui; Stark, Robert H.

    2000-05-01

    Microhollow cathode discharges are high-pressure, nonequilibrium gas discharges between a hollow cathode and a planar or hollow anode with electrode dimensions in the 100 μm range. The large concentration of high-energy electrons, in combination with the high-gas density favors excimer formation. Excimer emission was observed in xenon and argon, at wavelengths of 128 and 172 nm, respectively, and in argon fluoride and xenon chloride, at 193 and 308 nm. The radiant emittance of the excimer radiation was found to increase monotonically with pressure. However, due to the decrease in source size with pressure, the efficiency (ratio of excimer radiant power to input electrical power), has for xenon and argon fluoride a maximum at ˜400 Torr. The maximum efficiency is between 6% and 9% for xenon, and ˜2% for argon fluoride.

  9. Advances in 193 nm excimer lasers for mass spectrometry applications

    Science.gov (United States)

    Delmdahl, Ralph; Esser, Hans-Gerd; Bonati, Guido

    2016-03-01

    Ongoing progress in mass analysis applications such as laser ablation inductively coupled mass spectrometry of solid samples and ultraviolet photoionization mediated sequencing of peptides and proteins is to a large extent driven by ultrashort wavelength excimer lasers at 193 nm. This paper will introduce the latest improvements achieved in the development of compact high repetition rate excimer lasers and elaborate on the impact on mass spectrometry instrumentation. Various performance and lifetime measurements obtained in a long-term endurance test over the course of 18 months will be shown and discussed in view of the laser source requirements of different mass spectrometry tasks. These sampling type applications are served by excimer lasers delivering pulsed 193 nm output of several mJ as well as fast repetition rates which are already approaching one Kilohertz. In order to open up the pathway from the laboratory to broader market industrial use, sufficient component lifetimes and long-term stable performance behavior have to be ensured. The obtained long-term results which will be presented are based on diverse 193 nm excimer laser tube improvements aiming at e.g. optimizing the gas flow dynamics and have extended the operational life the laser tube for the first time over several billion pulses even under high duty-cycle conditions.

  10. Excimer laser assisted angioplasty in hemodialysis access intervention.

    Science.gov (United States)

    Yevzlin, Alexander S; Urbanes, Aris

    2009-01-01

    A case is described in which an excimer laser is used to assist angioplasty of a severe central venous lesion that is refractory to conventional techniques. Modern laser technology uses the ultraviolet (UV) spectral region to generate nanosecond pulses of energy. This results in photoablation, which is the process by which energy photons cause molecular bond disruption, while minimizing thermal damage to the surrounding vascular tissues. Further investigation of excimer laser assisted angioplasty in the setting of hemodialysis access intervention is needed to rigorously define its potential role. In occlusive disease where no conventional alternative is available, however, laser therapy is a viable option.

  11. The Characteristics of the Surface Topography of Excimer Laser Processed Al2O3 Ceramic

    Institute of Scientific and Technical Information of China (English)

    LIUYing; WENShi-zhu

    2004-01-01

    Surface of Al2O3 ceramic was processed by an excimer laser and the characteristics of topography were examined based on the application of thesystem(MEMS). It is indicated that the statistic pararueters of surface topography processed by the excimer laser have an obvioas regularity. The arithmeticmean value Ro and the root-mean square value Rq change with the changing of processing parameters in the same step and trend, and there is a quantitative relation between them. A simplified nuuIel is proposed for the excimer laser processing surface profile, whose results of the analysis and calculation agree basically with the experimental data. Furthermore, the surfaces processed by excimer laser are greatly fiat. Skewness root-mean-square value Zq changed little with the change of the technological parameters. The above characteristics depend on the processing principle of excimer laser, quite different from the cutting processing.

  12. Neutron detection by scintillation of noble-gas excimers

    Science.gov (United States)

    McComb, Jacob Collin

    Neutron detection is a technique essential to homeland security, nuclear reactor instrumentation, neutron diffraction science, oil-well logging, particle physics and radiation safety. The current shortage of helium-3, the neutron absorber used in most gas-filled proportional counters, has created a strong incentive to develop alternate methods of neutron detection. Excimer-based neutron detection (END) provides an alternative with many attractive properties. Like proportional counters, END relies on the conversion of a neutron into energetic charged particles, through an exothermic capture reaction with a neutron absorbing nucleus (10B, 6Li, 3He). As charged particles from these reactions lose energy in a surrounding gas, they cause electron excitation and ionization. Whereas most gas-filled detectors collect ionized charge to form a signal, END depends on the formation of diatomic noble-gas excimers (Ar*2, Kr*2,Xe* 2) . Upon decaying, excimers emit far-ultraviolet (FUV) photons, which may be collected by a photomultiplier tube or other photon detector. This phenomenon provides a means of neutron detection with a number of advantages over traditional methods. This thesis investigates excimer scintillation yield from the heavy noble gases following the boron-neutron capture reaction in 10B thin-film targets. Additionally, the thesis examines noble-gas excimer lifetimes with relationship to gas type and gas pressure. Experimental data were collected both at the National Institute of Standards and Technology (NIST) Center for Neutron Research, and on a newly developed neutron beamline at the Maryland University Training Reactor. The components of the experiment were calibrated at NIST and the University of Maryland, using FUV synchrotron radiation, neutron imaging, and foil activation techniques, among others. Computer modeling was employed to simulate charged-particle transport and excimer photon emission within the experimental apparatus. The observed excimer

  13. Microhollow Cathode Discharge Excimer Lamps

    Science.gov (United States)

    Schoenbach, K. H.

    1999-11-01

    character. Reducing the diameter of the cathode hole in a hollow cathode discharge geometry to values on the order of 100 μm has allowed us to extend the pressure range of stable, direct current hollow cathode gas discharges up to atmospheric pressure. The large concentration of high-energy electrons generated in the cathode fall, in combination with the high neutral gas density favors three-body processes such as excimer formation. Excimer emission in xenon discharges peaking at 172 nm, was observed with efficiencies between 6% and 9% at pressures of several hundred Torr. Typical forward voltages are 200 V at dc currents up to 8 mA. Pulsed operation allowed us to extend the current range to 80 mA with corresponding linear increase in optical power. Spatially resolved measurements showed that the source of the excimer radiation at atmospheric pressure and currents of less than 8 mA is confined to the cathode opening. The radiative emittance at 8 mA and atmospheric pressure is approximately 20 W/cm^2. With reduced pressure and increased current, respectively, the excimer source extends into the area outside the cathode hole. Besides in xenon, excimer emission in argon at a peak wavelength of 128 nm has been recorded. In addition to operating the discharge in rare gases, we have also explored its use as rare gas-halide excimer source. In a gas mixture containing 1% ArF we were able to generate stable dc discharges in flowing gas at pressures ranging from 100 Torr to atmospheric pressure. The spectra of the high-pressure ArF discharges are dominated by excimer radiation peaking at 193 nm. The excimer emission of a single ArF discharge at 700 Torr was measured as 150 mW at an efficiency of 3%. Parallel operation of these discharges by means of a resistive anode, which has recently been demonstrated for argon discharges, offers the possibility to use microhollow cathode discharge arrays as dc-excimer lamps, with estimated power densities exceeding 10 W/cm^2. abstract

  14. Proceedings of the third symposium on the physics and technology of compact toroids in the magnetic fusion energy program

    Energy Technology Data Exchange (ETDEWEB)

    Siemon, R.E. (comp.)

    1981-03-01

    This document contains papers contributed by the participants of the Third Symposium on Physics and Technology of Compact Toroids in the Magnetic Fusion Energy Program. Subjects include reactor aspects of compact toroids, energetic particle rings, spheromak configurations (a mixture of toroidal and poloidal fields), and field-reversed configurations (FRC's that contain purely poloidal field).

  15. Vacuum barrier for excimer lasers

    Energy Technology Data Exchange (ETDEWEB)

    Shurter, Roger P. (Jemez Springs, NM)

    1992-01-01

    A barrier for separating the vacuum area of a diode from the pressurized gas area of an excimer laser. The barrier is a composite material comprising layers of a metal such as copper, along with layers of polyimide, and a matrix of graphite fiber yarns impregnated with epoxy. The barrier is stronger than conventional foil barriers, and allows greater electron throughput.

  16. Vacuum barrier for excimer lasers

    Energy Technology Data Exchange (ETDEWEB)

    Shurter, R.P.

    1992-09-15

    A barrier for separating the vacuum area of a diode from the pressurized gas area of an excimer laser. The barrier is a composite material comprising layers of a metal such as copper, along with layers of polyimide, and a matrix of graphite fiber yarns impregnated with epoxy. The barrier is stronger than conventional foil barriers, and allows greater electron throughput. 3 figs.

  17. A novel compact model for on-chip stacked transformers in RF-CMOS technology

    Institute of Scientific and Technical Information of China (English)

    Liu Jun; Wen Jincai; Zhao Qian; Sun Lingling

    2013-01-01

    A novel compact model for on-chip stacked transformers is presented.The proposed model topology gives a clear distinction to the eddy current,resistive and capacitive losses of the primary and secondary coils in the substrate.A method to analytically determine the non-ideal parasitics between the primary coil and substrate is provided.The model is further verified by the excellent match between the measured and simulated S-parameters on the extracted parameters for a 1 ∶ 1 stacked transformer manufactured in a commercial RF-CMOS technology.

  18. Vacuum barrier for excimer lasers

    Energy Technology Data Exchange (ETDEWEB)

    Shurter, R.P.

    1990-10-10

    This invention is comprised of a barrier for separating the vacuum area of a diode from the pressurized gas area of an excimer laser. The barrier is a composite material comprising layers of a metal such as copper, along with layers of polyimide, and a matrix of graphite fiber yearns impregnated with epoxy. The barrier is stronger than conventional foil barriers, and allows greater electron throughput.

  19. Applications of excimer laser in nanofabrication

    Energy Technology Data Exchange (ETDEWEB)

    Xia, Qiangfei; Chou, Stephen Y. [Princeton University, Nanostructure Laboratory, Department of Electrical Engineering, Princeton, NJ (United States)

    2010-01-15

    This paper addresses novel applications of an excimer laser (308 nm wavelength, 20 ns pulse duration) in nanofabrication. Specifically, laser assisted nanoimprint lithography (LAN), self-perfection by liquefaction (SPEL), fabrication of metal nanoparticle arrays, and the fabrication of sub-10-nm nanofluidic channels are covered. In LAN, a polymeric resist is melted by the laser pulse, and then imprinted with a fused silica mold within 200 ns. LAN has been demonstrated in patterning various polymer nanostructures on different substrates with high fidelity and uniformity, and negligible heat effect on both the mold and the substrate. SPEL is a novel technology that uses selective melting to remove fabrication defects in nanostructures post fabrication. Depending on the boundary conditions, SPEL is categorized into three basic types: Open-SPEL that takes place with surface open, Capped-SPEL where a cap plate holds the top surface of the nanostructures and Guided-SPEL where a plate held a distance above the structure guides the molten materials to rise and form a new structure with better profile. Using SPEL (in less than 200 ns), we have achieved a reduction of line edge roughness (LER) of Cr lines to 1.5 nm (3{sigma}) (560% improvement from the original), which is well below what the previous technologies permit, and a dramatic increase of the aspect ratio of a nanostructure. We have used SPEL to make sub-25-nm smooth cylindrical NIL pillar molds and smoothing Si waveguides. Excimer laser is also used to make metal nanoparticles. Monolayers of particles are fabricated on various substrates (silicon, fused silica and plastics) by exposing thin metal films to a single laser pulse. Periodic nanoparticle arrays have been fabricated by fragmentation of metal grating lines. The periodicity of these nanoparticles can be regulated by surface topography such as shallow trenches. Finally, an excimer laser pulse has been used to melt the top portion of 1D and 2D Si gratings to

  20. Compact nanosecond pulsed power technology with applications to biomedical engineering, biology, and medicine

    Science.gov (United States)

    Gu, Xianyue

    Pulsed power refers to a technology that is suited to drive applications requiring very large power pulses in short bursts. Its recent emerging applications in biology demand compact systems with high voltage electric pulses in nanosecond time range. The required performance of a pulsed power system is enabled by the combined efforts in its design at three levels: efficient and robust devices at the component level, novel circuits and architecture at the system level, and effective interface techniques to deliver fast pulses at the application level. At the component level we are concerned with the power capability of switches and the energy storage density of capacitors. We compare semiconductor materials - Si, GaAs, GaN and SiC - for high voltage, high current, fast FET-type switches, and study the effects of their intrinsic defects on electrical characteristics. We present the fabrication of BST film capacitors on silicon substrates by pulsed laser deposition, and investigate their potential application to high voltage, high energy density capacitors. At the system level, a nanosecond pulse generator is developed for electroperturbation of biological cells. We model and design a Blumlein PFN (Pulse Forming Network) to deliver nanosecond pulses to a cuvette load. The resonant circuit employs four parallel 100 A MOSFET switches and charges the PFN to 8 kV within 350 ns. At the application level, in order to controllably deliver nanosecond electric pulses into tumors, we have designed, fabricated, and tested impulse catheter devices. Frequency responds, breakdown voltages and effective volumes of catheters are evaluated. With comparison of simulation and experimental results, we further develop dielectric dispersion models for RPMI. This thesis presents a set of strongly interdisciplinary studies based on pulsed power technology and towards biomedical applications. Addressed issues include from fundamental materials studies to application engineering designs that

  1. Monte Carlo simulation of a compact microbeam radiotherapy system based on carbon nanotube field emission technology.

    Science.gov (United States)

    Schreiber, Eric C; Chang, Sha X

    2012-08-01

    Microbeam radiation therapy (MRT) is an experimental radiotherapy technique that has shown potent antitumor effects with minimal damage to normal tissue in animal studies. This unique form of radiation is currently only produced in a few large synchrotron accelerator research facilities in the world. To promote widespread translational research on this promising treatment technology we have proposed and are in the initial development stages of a compact MRT system that is based on carbon nanotube field emission x-ray technology. We report on a Monte Carlo based feasibility study of the compact MRT system design. Monte Carlo calculations were performed using EGSnrc-based codes. The proposed small animal research MRT device design includes carbon nanotube cathodes shaped to match the corresponding MRT collimator apertures, a common reflection anode with filter, and a MRT collimator. Each collimator aperture is sized to deliver a beam width ranging from 30 to 200 μm at 18.6 cm source-to-axis distance. Design parameters studied with Monte Carlo include electron energy, cathode design, anode angle, filtration, and collimator design. Calculations were performed for single and multibeam configurations. Increasing the energy from 100 kVp to 160 kVp increased the photon fluence through the collimator by a factor of 1.7. Both energies produced a largely uniform fluence along the long dimension of the microbeam, with 5% decreases in intensity near the edges. The isocentric dose rate for 160 kVp was calculated to be 700 Gy∕min∕A in the center of a 3 cm diameter target. Scatter contributions resulting from collimator size were found to produce only small (<7%) changes in the dose rate for field widths greater than 50 μm. Dose vs depth was weakly dependent on filtration material. The peak-to-valley ratio varied from 10 to 100 as the separation between adjacent microbeams varies from 150 to 1000 μm. Monte Carlo simulations demonstrate that the proposed compact MRT system

  2. Non-Nuclear Testing of Compact Reactor Technologies at NASA MSFC

    Science.gov (United States)

    Houts, Michael G.; Pearson, J. Boise; Godfroy, Thomas J.

    2011-01-01

    Safe, reliable, compact, autonomous, long-life fission systems have numerous potential applications, both terrestrially and in space. Technologies and facilities developed in support of these systems could be useful to a variety of concepts. At moderate power levels, fission systems can be designed to operate for decades without the need for refueling. In addition, fast neutron damage to cladding and structural materials can be maintained at an acceptable level. Nuclear design codes have advanced to the stage where high confidence in the behavior and performance of a system can be achieved prior to initial testing. To help ensure reactor affordability, an optimal strategy must be devised for development and qualification. That strategy typically involves a combination of non-nuclear and nuclear testing. Non-nuclear testing is particularly useful for concepts in which nuclear operating characteristics are well understood and nuclear effects such as burnup and radiation damage are not likely to be significant. To be mass efficient, a SFPS must operate at higher coolant temperatures and use different types of power conversion than typical terrestrial reactors. The primary reason is the difficulty in rejecting excess heat to space. Although many options exist, NASA s current reference SFPS uses a fast spectrum, pumped-NaK cooled reactor coupled to a Stirling power conversion subsystem. The reference system uses technology with significant terrestrial heritage while still providing excellent performance. In addition, technologies from the SFPS system could be applicable to compact terrestrial systems. Recent non-nuclear testing at NASA s Early Flight Fission Test Facility (EFF-TF) has helped assess the viability of the reference SFPS and evaluate methods for system integration. In July, 2011 an Annular Linear Induction Pump (ALIP) provided by Idaho National Laboratory was tested at the EFF-TF to assess performance and verify suitability for use in a10 kWe technology

  3. Research of warm compaction technology on nylon bonded Nd-Fe-B magnets

    Institute of Scientific and Technical Information of China (English)

    Xiuhai ZHANG; Weihao XIONG; Dameng YE; Jun QU; Zhenhua YAO

    2009-01-01

    Warm compaction and room temperature compaction were applied to prepare bonded Nd-Fe-B magnets. The results indicated that the density of magnet was determined by the compaction pressure and warm compaction temperature, whereas, the ther-mosetting temperature could hardly affect the density of magnet. The mechanical properties of magnets were the best when the thermosetting temperature was 200 ℃.The Br, Hcb, and (BH)max of warm compaction magnet were higher than those of room compaction. When the warm compaction temperature and thermosetting tem-perature were invariable, the density of magnet increased with the increase of com-paction pressure, which resulted in the increase of Br, Hob, and (BH)max of magnet and the decrease of Hcj of magnet. When the warm compaction temperature and compaction pressure were invariable, the magnetic properties of magnets decreased with the increase of thermosetting temperature. The magnetic properties of warm compaction molding magnets were better than those of injection molding magnets.

  4. A reliable and consistent production technology for high volume compacted graphite iron castings

    Institute of Scientific and Technical Information of China (English)

    Liu Jincheng

    2014-01-01

    The demands for improved engine performance, fuel economy, durability, and lower emissions provide a continual chalenge for engine designers. The use of Compacted Graphite Iron (CGI) has been established for successful high volume series production in the passenger vehicle, commercial vehicle and industrial power sectors over the last decade. The increased demand for CGI engine components provides new opportunities for the cast iron foundry industry to establish efficient and robust CGI volume production processes, in China and globaly. The production window range for stable CGI is narrow and constantly moving. Therefore, any one step single addition of magnesium aloy and the inoculant cannot ensure a reliable and consistent production process for complicated CGI engine castings. The present paper introduces the SinterCast thermal analysis process control system that provides for the consistent production of CGI with low nodularity and reduced porosity, without risking the formation of lfake graphite. The technology is currently being used in high volume Chinese foundry production. The Chinese foundry industry can develop complicated high demand CGI engine castings with the proper process control technology.

  5. Physico-chemical and technological properties of ceramic tiles: Role of clay minerals on as pressed and dried compacts properties

    Directory of Open Access Journals (Sweden)

    Gouzouli N.

    2013-09-01

    Full Text Available Chemical, mineralogical and technological properties of an experimental clay are investigated with the aim to substitute for other clays used at present in factories. Flexural strength distributions of green and dry compacts were analysed and correlated to microstructural features with a view to evaluate their drying ability and their mechanical reliability.

  6. A Review of the Reflector Compact Fluorescent Lights Technology Procurement Program: Conclusions and Results

    Energy Technology Data Exchange (ETDEWEB)

    Sandahl, Linda J.; Gilbride, Theresa L.; Ledbetter, Marc R.; McCullough, Jeffrey J.

    2008-05-19

    This report describes a project sponsored by the U.S. Department of Energy (DOE) and implemented by the Pacific Northwest National Laboratory (PNNL), from 2000 to 2007 to improve the performance of reflector type (R-lamp) compact fluorescent lamps (CFLs) and increase their availability throughout the United States by means of a technology development and procurement strategy. In 2000, at the request of the U.S. Department of Energy’s Emerging Technologies Program and its predecessors, the Pacific Northwest National Laboratory undertook a technology procurement seeking R-CFLs that were specifically designed for use in ICAT recessed can fixtures and that met other minimum performance criteria including minimum light output and size restrictions (to ensure they fit in standard residential recessed cans). The technology procurement included two phases. In Phase I, requests for proposals (RFPs) were issued in October 2002 and five manufacturers responded with 12 lamp models. Eight of these models met the minimum requirements and passed the 6-hour short-term test in a simulated ICAT environment. These eight models were subjected to long-term tests of 6,000 or more hours in a simulated ICAT environment. Three of these models passed the short- and long-term tests and were promoted through the program website (www.pnl.gov/rlamps), press releases, and fliers. To increase the number of qualifying models, a second RFP was issued in June 2005. In April 2007, DOE announced that 16 reflector CFL (R-CFL) models by four manufacturers had met all the minimum requirements of Phase 2 of the R-CFL Technology Innovation Competition. PNNL developed both the criteria and the test apparatus design for Elevated Temperature Life Testing (ETLT), which has been included by DOE in its draft ENERGY STAR specifications for the reflector category of CFLs. PNNL promoted the winning lamps through a program website, press releases, and fliers as well as through program partners. PNNL also helped

  7. Excimer Laser Pulse Compress With Pulse Feedback

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>To attain a shorter laser pulse, a compressing technique called pulse feedback was developed from the saturation gain switch applied to the amplification in a discharge pumping excimer laser cavity. It can

  8. Impact of physics and technology innovations on compact tokamak fusion pilot plants

    Science.gov (United States)

    Menard, Jonathan

    2016-10-01

    missions including tritium breeding, high-thermal-efficiency liquid metal breeding blankets are attractive, and novel immersion blankets offer the potential for simplified fabrication and maintenance and reduced cost. Lastly, the optimal aspect ratio for a tokamak pilot plant is likely a function of the device mission and associated cost, with low aspect ratio favored for minimizing TF magnet mass and higher aspect ratio favored for minimizing blanket mass. The interplay between a range of physics and technology innovations for enabling compact pilot plants will be described. This work was supported by U.S. DOE Contract Number DE-AC02-09CH11466.

  9. Compact XUV excimer radiation sources and their application

    Science.gov (United States)

    Fedenev, Andrei V.; Morozov, Andrei; Wieser, Jochen; Ulrich, Andreas

    2004-05-01

    Low energy electron beam excitation of dense helium and neon was used for light production in the extreme ultraviolet (XUV) wavelength range. The entire system was completely filled with the working gas avoiding the use of vacuum equipment for light production, propagation and detection. Emission spectra from He and Ne are dominated by the second continua with peak intensities at 80 and 83 nm, respectively. The hydrogen Lyman-α line was observed as the dominant impurity line. This XUV light source was used for transmission measurements of LiF near its absorption edge.

  10. Compact 100Gb/s DP-QPSK integrated receiver module employing three-dimensional assembly technology.

    Science.gov (United States)

    Tanobe, H; Kurata, Y; Nakanishi, Y; Fukuyama, H; Itoh, M; Yoshida, E

    2014-03-10

    We demonstrate a compact 100 Gbit/s DP-QPSK receiver module that is only 18 mm (W) x 16 mm (D) x 2.8 mm (H). The module size is reduced by using a ball grid array (BGA) package with three-dimensional assembly technology and by applying a heterogeneous integrated PLC. Error-free DP-QPSK signal demodulation is successfully demonstrated.

  11. Chemical-free cleaning using excimer lasers

    Science.gov (United States)

    Lizotte, Todd E.; O'Keeffe, Terence R.

    1996-04-01

    A critical requirement in many industrial processes is the cleaning of oils and grease, oxides, solvent residues, particles, thin films and other contaminants from surfaces. There is a particularly acute need in the electronics industry for cleaning semiconductor wafers and computer chips and in the metals industry for removing oxides and other contaminants. Cleaning traditionally is done by various wet chemical processes, almost all consuming large amounts of water and producing large amounts of hazardous wastes. To further complicate this, some of these cleaning agents and vast water consumption are undergoing stringent restrictions. The Radiance ProcessSM is a novel, patented Excimer Laser approach to dry surface cleaning. The process has removed particles from 80 microns to submicron sizes, paints, inks, oxides, fingerprints, hazes, parts of molecules and metallic ions in fingerprints. The process does not ablate, melt or damage the underlying surface. Micro-roughening on some Silicon and Gallium Arsenide is on the order of 1A or less. This paper will discuss the various applications with this process and the latest results from a beta wafer cleaning prototype test bed system that is being built under an EPA grant and joint partnership between Radiance Services Company, Neuman Micro Technologies, Inc. and the Microelectronics Research Laboratory.

  12. Excimer emission from cathode boundary layer discharges

    Science.gov (United States)

    Moselhy, Mohamed; Schoenbach, Karl H.

    2004-02-01

    The excimer emission from direct current glow discharges between a planar cathode and a ring-shaped anode of 0.75 and 1.5 mm diameter, respectively, separated by a gap of 250 μm, was studied in xenon and argon in a pressure range from 75 to 760 Torr. The thickness of the "cathode boundary layer" plasma, in the 100 μm range, and a discharge sustaining voltage of approximately 200 V, indicates that the discharge is restricted to the cathode fall and the negative glow. The radiant excimer emittance at 172 nm increases with pressure and reaches a value of 4 W/cm2 for atmospheric pressure operation in xenon. The maximum internal efficiency, however, decreases with pressure having highest values of 5% for 75 Torr operation. When the discharge current is reduced below a critical value, the discharge in xenon changes from an abnormal glow into a mode showing self-organization of the plasma. Also, the excimer spectrum changes from one with about equal contributions from the first and second continuum to one that is dominated by the second continuum emission. The xenon excimer emission intensity peaks at this discharge mode transition. In the case of argon, self-organization of the plasma was not seen, but the emission of the excimer radiation (128 nm) again shows a maximum at the transition from abnormal to normal glow. As was observed with xenon, the radiant emittance of argon increases with pressure, and the efficiency decreases. The maximum radiant emittance is 1.6 W/cm2 for argon at 600 Torr. The maximum internal efficiency is 2.5% at 200 Torr. The positive slope of the current-voltage characteristics at maximum excimer emission in both cases indicates the possibility of generating intense, large area, flat excimer lamps.

  13. Using nanocomposite materials technology to understand and control reverse osmosis membrane compaction

    KAUST Repository

    Pendergast, Mary Theresa M.

    2010-10-01

    Composite reverse osmosis (RO) membranes were formed by interfacial polymerization of polyamide thin films over pure polysulfone and nanocomposite-polysulfone support membranes. Nanocomposite support membranes were formed from amorphous non-porous silica and crystalline microporous zeolite nanoparticles. For each hand-cast membrane, water flux and NaCl rejection were monitored over time at two different applied pressures. Nanocomposite-polysulfone supported RO membranes generally had higher initial permeability and experienced less flux decline due to compaction than pure polysulfone supported membranes. In addition, observed salt rejection tended to increase as flux declined from compaction. Crosssectional SEM images verified significant reduction in thickness of pure polysulfone supports, whereas nanocomposites better resisted compaction due to enhanced mechanical stability imparted by the nanoparticles. A conceptual model was proposed to explain the mechanistic relationship between support membrane compaction and observed changes in water flux and salt rejection. As the support membrane compacts, skin layer pore constriction increased the effective path length for diffusion through the composite membranes, which reduced both water and salt permeability identically. However, experimental salt permeability tended to decline to a greater extent than water permeability; hence, the observed changes in flux and rejection might also be related to structural changes in the polyamide thin film. © 2010 Elsevier B.V. All rights reserved.

  14. Development of a Compact Radiography Accelerator Using Dielectric Wall Accelerator Technology

    CERN Document Server

    Sampayan, Stephen; Chen Yu Jiuan; Hawkins, Steven; Holmes, Clifford; McCarrick, James F; Nelson, Scott D; Nunnally, William; Poole, Brian R; Rhodes, Mark; Sanders, David; Sullivan, James; Wang, Lisa; Watson, James

    2005-01-01

    We are developing of a compact accelerator system primarily intended for pulsed radiography. Design characteristics are an 8 MeV endpoint energy, 2 kA beam current and a cell gradient of approximately 3 MV/m. Overall length of the device is below 3 m. Such compact designs have been made possible with the development of high specific energy dielectrics (> 10 J/cc), specialized transmission line designs and multi-gap laser-triggered low jitter (<1 ns) gas switches. In this geometry, the pulse forming lines, switches and insulator/beam pipe are fully integrated within each cell to form a compact stand-alone stackable unit. We detail our research and modeling to date, recent high voltage test results, and the integration concept of the cells into a radiographic system.

  15. Instrumented roll technology for the design space development of roller compaction process.

    Science.gov (United States)

    Nesarikar, Vishwas V; Vatsaraj, Nipa; Patel, Chandrakant; Early, William; Pandey, Preetanshu; Sprockel, Omar; Gao, Zhihui; Jerzewski, Robert; Miller, Ronald; Levin, Michael

    2012-04-15

    Instrumented roll technology on Alexanderwerk WP120 roller compactor was developed and utilized successfully for the measurement of normal stress on ribbon during the process. The effects of process parameters such as roll speed (4-12 rpm), feed screw speed (19-53 rpm), and hydraulic roll pressure (40-70 bar) on normal stress and ribbon density were studied using placebo and active pre-blends. The placebo blend consisted of 1:1 ratio of microcrystalline cellulose PH102 and anhydrous lactose with sodium croscarmellose, colloidal silicon dioxide, and magnesium stearate. The active pre-blends were prepared using various combinations of one active ingredient (3-17%, w/w) and lubricant (0.1-0.9%, w/w) levels with remaining excipients same as placebo. Three force transducers (load cells) were installed linearly along the width of the roll, equidistant from each other with one transducer located in the center. Normal stress values recorded by side sensors and were lower than normal stress values recorded by middle sensor and showed greater variability than middle sensor. Normal stress was found to be directly proportional to hydraulic pressure and inversely to screw to roll speed ratio. For active pre-blends, normal stress was also a function of compressibility. For placebo pre-blends, ribbon density increased as normal stress increased. For active pre-blends, in addition to normal stress, ribbon density was also a function of gap. Models developed using placebo were found to predict ribbon densities of active blends with good accuracy and the prediction error decreased as the drug concentration of active blend decreased. Effective angle of internal friction and compressibility properties of active pre blend may be used as key indicators for predicting ribbon densities of active blend using placebo ribbon density model. Feasibility of on-line prediction of ribbon density during roller compaction was demonstrated using porosity-pressure data of pre-blend and normal stress

  16. Microbial Characterization of Solid-Wastes Treated with Heat Melt Compaction Technology

    Science.gov (United States)

    Strayer, Richard F.; Hummerick, Mary E.; Richards, Jeffrey T.; McCoy, LaShelle E.; Roberts, Michael S.; Wheeler, Raymond M.

    2011-01-01

    The research purpose of the project was to determine the fate of microorganisms in space-generated solid wastes after processing by a Heat Melt Compactor (HMC), which is a candidate solid waste treatment technology. Five HMC product disks were generated at Ames Research Center (ARC), Waste Management Systems element. The feed for two was simulated space-generated trash and feed for three was Volume F compartment wet waste returned on STS 130. Conventional microbiological methods were used to detect and enumerate microorganisms in HMC disks and in surface swab samples of HMC hardware before and after operation. Also, biological indicator test strips were added to the STS trash prior to compaction to test if HMC processing conditions, 150 C for approx 3 hr and dehydration, were sufficient to eliminate the test bacteria on the strips. During sample acquisition at KSC, the HMC disk surfaces were sanitized with 70% alcohol to prevent contamination of disk interiors. Results from microbiological assays indicated that numbers of microbes were greatly reduced but not eliminated by the 70% alcohol. Ten 1.25 cm diameter cores were aseptically cut from each disk to sample the disk interior. The core material was run through the microbial characterization analyses after dispersal in sterile diluent. Low counts of viable bacteria (5 to 50 per core) were found but total direct counts were 6 to 8 orders of magnitude greater. These results indicate that the HMC operating conditions might not be sufficient for complete waste sterilization, but the vast majority of microbes present in the wastes were dead or non-cultivable after HMC treatment. The results obtained from analyses of the commercial spore test strips that had been added fo the wastes prior to HMC operation further indicated that the HMC was sterilizing the wastes. Nearly all strips were recovered from the HMC disks and all of these were negative for spore growth when run through the manufacturer's protocol. The 10(exp 6

  17. Formation mechanism of ethanol-water excimer

    Institute of Scientific and Technical Information of China (English)

    Ying Liu; Hua Shao; Xiaowu Ni; Jian Lu

    2008-01-01

    The fluorescent spectrum and the excitation spectrum were used to present the cluster molecular structure feature in ethanol-water solutions.Through analyzing the fluorescent characteristics of an excimer,it is proposed that the excimers are formed between the ethanol-water cluster molecules in the excited state and in the ground state.The fluorescent lifetime and the fluorescent intensity decay process give information about the photo-physical and photo-chemical processes of the formation and the dissociation of an excimer.The theoretical calculation and physical analysis coincide with the experimental results.The preliminary conclusion about the structure feature of ethanol-water cluster molecule is that it has a planar one like a sandwich.

  18. 308-nm excimer laser in endodontics

    Science.gov (United States)

    Liesenhoff, Tim

    1992-06-01

    Root canal preparation was performed on 20 extracted human teeth. After opening the coronal pulp, the root canals were prepared by 308 nm excimer laser only. All root canals were investigated under SEM after separation in the axial direction. By sagittal separation of the mandibles of freshly slaughtered cows, it was possible to get access to the tissues and irradiate under optical control. Under irradiation of excimer laser light, tissue starts to fluoresce. It was possible to demonstrate that each tissue (dentin, enamel, bone, pulpal, and connective tissue) has a characteristic spectral pattern. The SEM analyses showed that it is well possible to prepare root canals safely. All organic soft tissue has been removed by excimer laser irradiation. There was no case of via falsa. The simultaneous spectroscopic identification of the irradiated tissue provides a safe protection from overinstrumentation. First clinical trials on 20 patients suffering of chronical apical parodontitis have been carried out successfully.

  19. Design of compact system with wide electron beam for radiation technologies

    CERN Document Server

    Korolyov, A N; Pirozhenko, Vitaly M

    2001-01-01

    Design of a compact system for radiation processing of products and materials has been developed. The system provides two modes of irradiation, i.e. irradiation of continuously moving tapes and fixed samples. The irradiation is performed in a hermetically sealed chamber filled by nitrogen. This ecologically pure system includes the radiation protection,autonomous water cooling system and automated PC-control. It can be placed in any production or clinical room.

  20. Pixel diamond detectors for excimer laser beam diagnostics

    Science.gov (United States)

    Girolami, M.; Allegrini, P.; Conte, G.; Salvatori, S.

    2011-05-01

    Laser beam profiling technology in the UV spectrum of light is evolving with the increase of excimer lasers and lamps applications, that span from lithography for VLSI circuits to eye surgery. The development of a beam-profiler, able to capture the excimer laser single pulse and process the acquired pixel current signals in the time period between each pulse, is mandatory for such applications. 1D and 2D array detectors have been realized on polycrystalline CVD diamond specimens. The fast diamond photoresponse, in the ns time regime, suggests the suitability of such devices for fine tuning feedback of high-power pulsed-laser cavities, whereas solar-blindness guarantees high performance in UV beam diagnostics, also under high intensity background illumination. Offering unique properties in terms of thermal conductivity and visible-light transparency, diamond represents one of the most suitable candidate for the detection of high-power UV laser emission. The relatively high resistivity of diamond in the dark has allowed the fabrication of photoconductive vertical pixel-detectors. A semitransparent light-receiving back-side contact has been used for detector biasing. Each pixel signal has been conditioned by a multi-channel read-out electronics made up of a high-sensitive integrator and a Σ-Δ A/D converter. The 500 μs conversion time has allowed a data acquisition rate up to 2 kSPS (Sample Per Second).

  1. Design verification of a compact system for detecting tissue perfusion using bimodal diffuse optical technologies

    Science.gov (United States)

    Pakela, Julia M.; Hedrick, Taylor L.; Lee, Seung Yup; Vishwanath, Karthik; Zanfardino, Sara; Chung, Yooree G.; Helton, Michael C.; Kolodziejski, Noah J.; Stapels, Christopher J.; McAdams, Daniel R.; Fernandez, Daniel E.; Christian, James F.; Feinberg, Stephen E.; Mycek, Mary-Ann

    2017-02-01

    It is essential to monitor tissue perfusion during and after reconstructive surgery, as restricted blood flow can result in graft failures. Current clinical procedures are insufficient to monitor tissue perfusion, as they are intermittent and often subjective. To address this unmet clinical need, a compact, low-cost, multimodal diffuse correlation spectroscopy and diffuse reflectance spectroscopy system was developed. We verified system performance via tissue phantoms and experimental protocols for rigorous bench testing. Quantitative data analysis methods were employed and tested to enable the extraction of tissue perfusion parameters. This design verification study assures data integrity in future in vivo studies.

  2. Compact NMR

    Energy Technology Data Exchange (ETDEWEB)

    Bluemich, Bernhard; Haber-Pohlmeier, Sabina; Zia, Wasif [RWTH Aachen Univ. (Germany). Inst. fuer Technische und Makromolekulare Chemie (ITMC)

    2014-06-01

    Nuclear Magnetic Resonance (NMR) spectroscopy is the most popular method for chemists to analyze molecular structures, while Magnetic Resonance Imaging (MRI) is a non-invasive diagnostic tool for medical doctors that provides high-contrast images of biological tissue. In both applications, the sample (or patient) is positioned inside a large, superconducting magnet to magnetize the atomic nuclei. Interrogating radio-frequency pulses result in frequency spectra that provide the chemist with molecular information, the medical doctor with anatomic images, and materials scientist with NMR relaxation parameters. Recent advances in magnet technology have led to a variety of small permanent magnets to allow compact and low-cost instruments. The goal of this book is to provide an introduction to the practical use of compact NMR at a level nearly as basic as the operation of a smart phone.

  3. RoCoS紧密纺纱新技术%RoCoS compact spinning technology

    Institute of Scientific and Technical Information of China (English)

    刘林兵; 高卫东; 程丙伟

    2005-01-01

    文章介绍了一种新的紧密纺纱技术--RoCoS(Rotorcraft Compact Spinning System).RoCoS紧密纺纱系统借助于RoCoS组合件构成三罗拉四皮辊牵伸结构,采用磁铁--机械式原理集束,相继实现纱线的牵伸、集聚和加捻.RoCoS紧密纺纱技术结构简单,安装便捷,使用可靠,维护方便,克服了传统气流集束式紧密纺技术的不足.它适于纺棉型或毛型纱线,可用于新机或老机改造,是一种有较强市场发展潜力的新型紧密纺纱技术.

  4. Utilizing dendritic scaffold for feasible formation of naphthalene excimer

    Indian Academy of Sciences (India)

    P K Lekha; Tufan Ghosh; Edamana Prasad

    2011-11-01

    Peripheral functionalization of PAMAM dendrimers with naphthalene units leads to significant ground state aggregation in the system above the critical aggregation concentrations (CAC). Upon photoexcitation of the ground state aggregates, static type excimer formation of naphthalene moiety is observed. Significant red-shifted emission from naphthalene excimers is achieved through generating the static type excimers in polar solvents such as methanol and acetonitrile-water mixtures. Control experiments suggest that the presence of dendritic scaffold in the system play a pivotal role in generating intense static excimer emission in naphthalene modified PAMAM dendrimers, in solution phase at room temperature.

  5. Pulsed microhollow cathode discharge excimer sources

    Science.gov (United States)

    Moselhy, Mohamed; Shi, Wenhui; Strak, Robert H.; Schoenbach, Karl H.

    2001-10-01

    Microhollow cathode discharges (MHCDs) are non-equilibrium, high-pressure gas discharges between perforated electrodes separated by a dielectric layer. Typical dimensions for the electrode foil thickness and hole diameter are 100 μm. Direct current experiments in xenon, argon, neon, helium, argon fluoride, and xenon chloride [1,2] have been performed. The excimer efficiency varies between 1 % and 9 %. Pulsed operation allowed us to increase the current from 8 mA (dc) to approximately 80 mA (pulsed with a pulse width of 700 μs), limited by the onset of instabilities. The total excimer power was found to increase linearly with current, however, the radiant emittance and efficiency stayed constant. Reducing the pulse duration into the nanosecond range allowed us to increase the current into the ampere range. The maximum measured excimer power was 2.75 W per microdischarge. The maximum radiant emittance was 15 W/cm^2 and the efficiency reached values of 20 %. This effect is assumed to be due to non-equilibrium electron heating in the high-pressure plasma [3]. This work was supported by the National Science Foundation under grant # CTS0078618. 1. Karl H. Schoenbach, Ahmed El-Habachi, Mohamed M. Moselhy, Wenhui Shi, and Robert H. Stark, Physics of Plasmas 7, 2186 (2000). 2. P. Kurunczi, J. Lopez, H. Shah, and K. Becker, Int. J. Mass Spectrom. 205, 277 (2001). 3. Robert H. Stark and Karl H. Schoenbach, J. Appl. Phys. 89, 3568 (2001).

  6. [Corneal wound healing after experimental penetrating keratoplasty after excimer laser trephination in free form].

    Science.gov (United States)

    Schmitz, K; Lang, G K; Behrens-Baumann, W

    2006-12-01

    The postoperative clinical course after penetrating keratoplasty and trephination in free form using a guided excimer laser beam has been published before. Here the findings of light-microscopy comparing corneal wound healing after experimental penetrating keratoplasty after laser trephination and after conventional mechanical trephination are presented. Homologous penetrating keratoplasty was performed on 12 NZW rabbits (6 animals with mechanical trephination, 6 animals with excimer laser trephination). The cutting edges achieved by both trephination techniques were examined by light microscopy in the remaining donor rings. During the postoperative follow-up animals were sacrificed at 3 and 6 weeks and at 3 months. Corneal specimens were retrieved and corneal healing processes were evaluated by light microscopy. The cutting edges of corneal excisions with the excimer laser demonstrated a high precision with only minimal collateral damage to adjacent tissue structures. At the different intervals both trephination groups demonstrated comparable stages of corneal wound healing regarding epithelial regeneration, stromal fibroblast migration with collagen synthesis and Descemet repair by endothelial synthesis of basement membrane. After 6 months corneal specimens of both groups demonstrated complete healing with nearly parallel orientation of newly synthesised collagen lamellae. Corneal thickness in the wound areas did not differ significantly from normal corneal tissue. Experimental follow-up studies to evaluate the feasibility of the developed technology of laser trephination in the living eye have shown no differences between conventional mechanical and excimer laser trephination with a guided beam. The present histology study also does not demonstrate any significant differences in corneal wound healing between the two trephination groups. Although excimer laser trephination along metal masks has now been established for several years, the here presented technique

  7. Investigation of the effects of LIFT printing with a KrF-excimer laser on thermally sensitive electrically conductive adhesives

    NARCIS (Netherlands)

    Perinchery, S.M.; Smits, E.C.P.; Sridhar, A.; Albert, P.; Brand, J. van den; Mandamparambil, R.; Yakimets, I.; Schoo, H.F.M.

    2014-01-01

    Laser induced forward transfer is an emerging material deposition technology. We investigated the feasibility of this technique for printing thermally sensitive, electrically conductive adhesives with and without using an intermediate dynamic release layer. A 248nm KrF-excimer laser was used to prin

  8. Introduction of the hybcell-based compact sequencing technology and comparison to state-of-the-art methodologies for KRAS mutation detection.

    Science.gov (United States)

    Zopf, Agnes; Raim, Roman; Danzer, Martin; Niklas, Norbert; Spilka, Rita; Pröll, Johannes; Gabriel, Christian; Nechansky, Andreas; Roucka, Markus

    2015-03-01

    The detection of KRAS mutations in codons 12 and 13 is critical for anti-EGFR therapy strategies; however, only those methodologies with high sensitivity, specificity, and accuracy as well as the best cost and turnaround balance are suitable for routine daily testing. Here we compared the performance of compact sequencing using the novel hybcell technology with 454 next-generation sequencing (454-NGS), Sanger sequencing, and pyrosequencing, using an evaluation panel of 35 specimens. A total of 32 mutations and 10 wild-type cases were reported using 454-NGS as the reference method. Specificity ranged from 100% for Sanger sequencing to 80% for pyrosequencing. Sanger sequencing and hybcell-based compact sequencing achieved a sensitivity of 96%, whereas pyrosequencing had a sensitivity of 88%. Accuracy was 97% for Sanger sequencing, 85% for pyrosequencing, and 94% for hybcell-based compact sequencing. Quantitative results were obtained for 454-NGS and hybcell-based compact sequencing data, resulting in a significant correlation (r = 0.914). Whereas pyrosequencing and Sanger sequencing were not able to detect multiple mutated cell clones within one tumor specimen, 454-NGS and the hybcell-based compact sequencing detected multiple mutations in two specimens. Our comparison shows that the hybcell-based compact sequencing is a valuable alternative to state-of-the-art methodologies used for detection of clinically relevant point mutations.

  9. A New Direct-Pour In-Mold (DPI) Technology for Producing Ductile and Compacted Graphite Iron Castings.

    Energy Technology Data Exchange (ETDEWEB)

    Jason Hitchings; Jay R. Hitchings

    2007-07-20

    A new "Direct Pour In-Mold" (DPI) Magnesium treatment technology has been developed that can produce both Nodular and Compacted Graphite iron. The DPI technology converts the standard horizontal runner system into a vertical one, by placing a Magnesium Ferrosilicon treatment alloy and molten metal filter into a specially designed container. The DPI container is easily placed into either vertically or horizontally parted molds, and then a base metal can be poured directly into it. The metal is treated and filtered as it passes through, and then proceeds directly into a runner or casting cavity. Various sizes of containers provide all of the necessary components required to deliver a range of weights of treated and filtered metal at accurate and consistent flow rates. The DPI containers provide energy savings over competing techniques, increased mold yields, very high Magnesium recovery, zero Magnesium fume, and no post inoculation is required. By treating the metal just prior to it entering a casting cavity many other benefits and advantages are also realized.

  10. Status report on compact gasifier cogeneration units in Germany. Applications of the cogeneration gasifier technology; Stand kleintechnischer Vergaser-BHKW-Anlagen in Deutschland. Einsatz der BHKW-Vergasertechnologie

    Energy Technology Data Exchange (ETDEWEB)

    Zschunke, Tobias; Schuessler, Ingmar; Salomo, Bert [Hochschule Zittau/Goerlitz (Germany); Braekow, Dieter [Foerdergesellschaft Erneuerbare Energien e.V., Berlin (Germany); Treppe, Konrad [Technische Univ. Dresden (Germany). Inst. fuer Verfahrenstechnik und Umwelttechnik

    2010-07-01

    In contrast to biogas, the use of solid biomass with low water content in cogeneration units is lagging several years of development behind. A promising variant is a wood gas engine cogeneration unit. Different energy sources can be combined, e.g. in an Otto engine and a Stirling engine. The authors describe the technology for compact systems. (orig.)

  11. Phenylethynylpyrene excimer forming hybridization probes for fluorescence SNP detection

    DEFF Research Database (Denmark)

    Prokhorenko, Igor A.; Astakhova, Irina V.; Momynaliev, Kuvat T.

    2009-01-01

    Excimer formation is a unique feature of some fluorescent dyes (e.g., pyrene) which can be used for probing the proximity of biomolecules. Pyrene excimer fluorescence has previously been used for homogeneous detection of single nucleotide polymorphism (SNP) on DNA. 1-Phenylethynylpyrene (1-1-PEPy...

  12. A prototype erodible mask delivery system for the excimer laser.

    Science.gov (United States)

    Maloney, R K; Friedman, M; Harmon, T; Hayward, M; Hagen, K; Gailitis, R P; Waring, G O

    1993-04-01

    The authors developed an erodible mask delivery system for the argon-fluoride 193-nm excimer laser, which offers the possibility of correcting hyperopia and astigmatism as well as myopia. Masks were made of polymethylmethacrylate on a quartz window, with intended corrections for myopia and hyperopia of 2.5 and 5 diopters (D). Ablations using the mask and control ablations using an expanding diaphragm were performed in 30 eyes of 15 pigmented rabbits with an Excimed UV200 laser (Summit Technology, Inc, Waltham, MA). The rabbits were followed for 134 days with regular biomicroscopy and retinoscopic examination by two observers. Ablations with the mask to correct myopia were successful and produced stable corrections, although the higher-power mask produced undercorrections. Hyperopic masks produced paradoxic myopic corrections, possibly due to the lack of a transition zone at the edge of the mask. Corneas ablated with the mask had less sub-epithelial haze than those ablated with the diaphragm at all examinations. Results of histopathologic examination showed epithelial hyperplasia over the ablation zone in all eyes. Dichlorotriazinyl aminofluorescein collagen staining showed subepithelial new collagen in all eyes, but there was no relation between the depth of ablation at any point on the cornea and the amount of new collagen deposited there. Myopic ablations are feasible with the erodible mask, although additional calibration is needed. Hyperopic ablations were unsuccessful with the current design. Corneas ablated with the mask may be clearer than corneas ablated with the diaphragm, possibly due to a smoother ablated surface. Regression of effect after laser ablation in the rabbit model is likely due more to epithelial hyperplasia than to stromal remodeling.

  13. Continuous Microwave Excitation of Excimer Lamps.

    Science.gov (United States)

    Hassal, Scott Bradley

    1991-01-01

    For decades, microwaves have been used to create gas discharges for many applications. This thesis deals with the use of microwaves to excite gas discharges for incoherent optical sources, with particular emphasis on excimer systems. In addition, microwave excitation of a gas laser is considered. A novel apparatus was designed and built to couple 2.45-GHz microwave radiation into a gas discharge. The microwave resonator is the essential part of this equipment, and a detailed discussion of its design and performance is given. The resonator is characterized both theoretically and experimentally in order to determine the coupling efficiency and peak electric-field strength. Specialized theory is developed in order to evaluate many parameters of a microwave-excited discharge. The phenomenon of skin effect is investigated quantitatively and expressions for the plasma frequency and electron density are developed in terms of collision frequency and observable parameters (e.g., skin depth). Expressions for peak electric-field strength, ionization coefficient and collisionless electron energy are also developed. The results of an extensive investigation of continuous-wave microwave-excited excimer fluorescence are reported. Rare-gas halide, homonuclear halogen and heteronuclear halogen systems are examined and the corresponding ultraviolet spectra are presented. Truly continuous excimer emission has been achieved (for the first time) on several transitions. For systems of particular interest (e.g. XeCl and KrCl), the effects of total pressures and gas composition on fluorescence output are investigated, and the appropriate spectra are presented. Finally, the potential operation of microwave-excited carbon dioxide and argon-ion gas lasers is investigated, and upper limits are deduced for the small-signal gain under various conditions.

  14. Excimer laser irradiation of metal surfaces

    Science.gov (United States)

    Kinsman, Grant

    In this work a new method of enhancing CO2 laser processing by modifying the radiative properties of a metal surface is studied. In this procedure, an excimer laser (XeCl) or KrF) exposes the metal surface to overlapping pulses of high intensity, 10(exp 8) - 10(exp 9) W cm(exp -2), and short pulse duration, 30 nsec FWHM (Full Width Half Maximum), to promote structural and chemical change. The major processing effect at these intensities is the production of a surface plasma which can lead to the formation of a laser supported detonation wave (LSD wave). This shock wave can interact with the thin molten layer on the metal surface influencing to a varying degree surface oxidation and roughness features. The possibility of the expulsion, oxidation and redeposition of molten droplets, leading to the formation of micron thick oxide layers, is related to bulk metal properties and the incident laser intensity. A correlation is found between the expulsion of molten droplets and a Reynolds number, showing the interaction is turbulent. The permanent effects of these interactions on metal surfaces are observed through scanning electron microscopy (SEM), transient calorimetric measurements and Fourier transform infrared (FTIR) spectroscopy. Observed surface textures are related to the scanning procedures used to irradiate the metal surface. Fundamental radiative properties of a metal surface, the total hemispherical emissivity, the near-normal spectral absorptivity, and others are examined in this study as they are affected by excimer laser radiation. It is determined that for heavily exposed Al surface, alpha' (10.6 microns) can be increased to values close to unity. Data relating to material removal rates and chemical surface modification for excimer laser radiation is also discussed. The resultant reduction in the near-normal reflectivity solves the fundamental problem of coupling laser radiation into highly reflective and conductive metals such as copper and aluminum. The

  15. Compact Shorted Stacked-Patch Antenna Integrated with Chip-Package Based on LTCC Technology

    Directory of Open Access Journals (Sweden)

    Yongjiu Li

    2014-01-01

    Full Text Available A low profile chip-package stacked-patch antenna is proposed by using low temperature cofired ceramic (LTCC technology. The proposed antenna employs a stacked-patch to achieve two operating frequency bands and enhance the bandwidth. The height of the antenna is decreased to 4.09 mm (about λ/25 at 2.45 GHz due to the shorted pin. The package is mounted on a 44 × 44 mm2 ground plane to miniaturize the volume of the system. The design parameters of the antenna and the effect of the antenna on chip-package cavity are carefully analyzed. The designed antenna operates at a center frequency of 2.45 GHz and its impedance bandwidth (S11< -10 dB is 200 MHz, resulting from two neighboring resonant frequencies at 2.41 and 2.51 GHz, respectively. The average gain across the frequency band is about 5.28 dBi.

  16. Excimer Laser Beam Analyzer Based on CVD Diamond

    Science.gov (United States)

    Girolami, Marco; Salvatori, Stefano; Conte, Gennaro

    2010-11-01

    1-D and 2-D detector arrays have been realized on CVD-diamond. The relatively high resistivity of diamond in the dark allowed the fabrication of photoconductive "sandwich" strip (1D) or pixel (2D) detectors: a semitransparent light-receiving back-side contact was used for detector biasing. Cross-talk between pixels was limited by using intermediate guard contacts connected at the same ground potential of the pixels. Each pixel photocurrent was conditioned by a read-out electronics composed by a high sensitive integrator and a Σ-Δ ADC converter. The overall 500 μs conversion time allowed a data acquisition rate up to 2 kSPS. The measured fast photoresponse of the samples in the ns time regime suggests to use the proposed devices for fine tuning feedback of high-power pulsed-laser cavities, whereas solar-blindness guarantees high performance in UV beam diagnostics also under high intensity background illumination. Offering unique properties in terms of thermal conductivity and visible-light transparency, diamond represents one of the most suitable candidate for the detection of high-power UV laser emission. The technology of laser beam profiling is evolving with the increase of excimer lasers applications that span from laser-cutting to VLSI and MEMS technologies. Indeed, to improve emission performances, fine tuning of the laser cavity is required. In such a view, the development of a beam-profiler, able to work in real-time between each laser pulse, is mandatory.

  17. Optical fiber transmission of high power excimer laser radiation.

    Science.gov (United States)

    Pini, R; Salimbeni, R; Vannini, M

    1987-10-01

    An experimental investigation of optical fiber transmission of high power excimer laser radiation is presented. Different types of commercially available UV fiber have been tested, measuring energy handling capabilities and transmission losses of short samples at the XeCl (308-nm) and KrF (249-nm) wavelengths by using a standard excimer laser. A power density dependent damage process has been observed over 1 GW/cm(2). Fiber losses due to different radii of curvature are also reported. Experimental results have been examined to evaluate the effectiveness of excimer laser transmission through optical fibers for such medical uses as laser angioplasty, including also a comparison between the use of KrF or XeCl emission lines for this purpose. Finally, optimum excimer laser characteristics to increase the energy coupling in fibers are discussed.

  18. [Glycosaminoglycans in subepithelial opacity after excimer laser keratectomy].

    Science.gov (United States)

    Nakayasu, K; Gotoh, T; Ishikawa, T; Kanai, A

    1996-05-01

    We evaluated histochemically the characteristics of glycosaminoglycans and proteoglycans in the corneal subepithelial opacity after excimer laser keratectomy on rabbit corneas. We also performed the same evaluations on the cornea after mechanical keratectomy. Twenty days after the operations, the area immediately subjacent to the epithelium showed strong staining with toluidine blue, alcian blue, and colloidal iron. However, after treatment with chondroitinase ABC or chondroitinase AC, alcian blue staining in this area decreased dramatically. Antilarge proteoglycan antibody also reacted strongly in this area. Histochemical and immunohistochemical examination of the cornea where mechanical keratectomy was done showed basically similar findings with the cornea of excimer laser keratectomy. These results suggest that large-molecula proteoglycans with chondroitine sulfate side chains become localized in the subepithelial area after two different kinds of keratectomies. We presume from histochemical and immunohistochemical observations that the subepithelial opacity observed after excimer laser keratectomy is not a special reaction to excimer laser but simply a corneal scar formed after stromal resection.

  19. Permanent excimer superstructures by supramolecular networking of metal quantum clusters

    Science.gov (United States)

    Santiago-Gonzalez, Beatriz; Monguzzi, Angelo; Azpiroz, Jon Mikel; Prato, Mirko; Erratico, Silvia; Campione, Marcello; Lorenzi, Roberto; Pedrini, Jacopo; Santambrogio, Carlo; Torrente, Yvan; De Angelis, Filippo; Meinardi, Francesco; Brovelli, Sergio

    2016-08-01

    Excimers are evanescent quasi-particles that typically form during collisional intermolecular interactions and exist exclusively for their excited-state lifetime. We exploited the distinctive structure of metal quantum clusters to fabricate permanent excimer-like colloidal superstructures made of ground-state noninteracting gold cores, held together by a network of hydrogen bonds between their capping ligands. This previously unknown aggregation state of matter, studied through spectroscopic experiments and ab initio calculations, conveys the photophysics of excimers into stable nanoparticles, which overcome the intrinsic limitation of excimers in single-particle applications—that is, their nearly zero formation probability in ultra-diluted solutions. In vitro experiments demonstrate the suitability of the superstructures as nonresonant intracellular probes and further reveal their ability to scavenge reactive oxygen species, which enhances their potential as anticytotoxic agents for biomedical applications.

  20. Random noise can help to improve synchronisation of excimer laser pulses

    CERN Document Server

    Mingesz, Robert; Gingl, Zoltan; Mellar, Janos

    2015-01-01

    Recently we have reported on a compact microcontroller-based unit developed to accurately synchronise excimer laser pulses (Robert Mingesz et al, Fluct. Noise Lett. 11, 1240007 (2012), DOI: 10.1142/S021947751240007X, arXiv:1109.2632). We have shown that dithering based on the random jitter noise plus pseudorandom numbers can be used in the digital control system to radically reduce the long-term drift of the laser pulse from the trigger and to improve the accuracy of the synchronisation. In this update paper we present our new experimental results obtained by the use of the delay controller unit to tune the timing of a KrF excimer laser as an addition to our previous numerical simulation results. The hardware was interfaced to the laser using optical signal paths in order to reduce sensitivity to electromagnetic interference and the control algorithm tested by simulations were applied in the experiments. We have found that the system is able to reduce the delay uncertainty very close to the theoretical limit ...

  1. Compact Orthoalgebras

    CERN Document Server

    Wilce, A

    2004-01-01

    We initiate a study of topological orthoalgebras (TOAs), concentrating on the compact case. Examples of TOAs include topological orthomodular lattices, and also the projection lattice of a Hilbert space. As the latter example illustrates, a lattice-ordered TOA need not be a topological lattice. However, we show that a compact Boolean TOA is a topological Boolean algebra. Using this, we prove that any compact regular TOA is atomistic, and has a compact center. We prove also that any compact TOA with isolated 0 is of finite height. We then focus on stably ordered TOAs: those in which the upper-set generated by an open set is open. These include both topological orthomodular lattices and interval orthoalgebras -- in particular, projection lattices. We show that the topology of a compact stably-ordered TOA with isolated 0 is determined by that of of its space of atoms.

  2. Compaction parameters and technologies in forest- and long- distance transportation of wood fuels; Tiivistaemisparametrit ja -tekniikat puupolttoaineiden metsae- ja kaukokuljetuksessa

    Energy Technology Data Exchange (ETDEWEB)

    Kaipainen, H. [VTT Energy, Jyvaeskylae (Finland)

    1997-12-01

    The objective of the research is to increase the level of knowledge by the aid of systematic research on the timber and the compacting of the fragments of it for forest and lorry transportation. Theoretical information on the compacting phenomena, and the factors effecting on them, will be composed in the study, and the compacting techniques with different raw materials will be studied experimentally. The objective is to reduce the forest transportation costs by 10 % and those of lorry transportation by 15 - 20 % depending on the raw material to be transported. The data obtained in the researches carried out both in Finland and abroad will be investigated in the project. The data consists also of the baling and bundling of felling residues and small-diameter wood. A test equipment, by which the compacting parameters of first thinning pine and spruce felling residues will be determined under winter conditions, was constructed to serve the experimental part of the research. The compacting tests were started at the end of January 1997, so the results of the tests will be available for the final report of 1997 in March 1997. (orig.)

  3. Advanced Catalysis Technologies: Lanthanum Cerium Manganese Hexaaluminate Combustion Catalysts for Flat Plate Reactor for Compact Steam Reformers

    Science.gov (United States)

    2008-12-01

    E. Pocoroba, E.M. Johansson, S.G. Jaras, ”Aging Of Palladium, Platinum And Manganese-Based Combustion Catalysts For Biogas Applications,” Catalysis...M.J. Binder, “JP-8 Catalytic Cracking For Compact Fuel Processors,” Journal of Power Sources 129 (2004) 81-89. 12. P-O.F. Andersson, M

  4. A compact T-shaped nanodevice for charge sensing of a tunable double quantum dot in scalable silicon technology

    Energy Technology Data Exchange (ETDEWEB)

    Tagliaferri, M.L.V., E-mail: marco.tagliaferri@mdm.imm.cnr.it [Laboratorio MDM, CNR-IMM, Via C. Olivetti 2, 20864 Agrate Brianza (MB) (Italy); Dipartimento di Scienza dei Materiali, Università di Milano Bicocca, Via Cozzi 53, 20125 Milano (Italy); Crippa, A. [Laboratorio MDM, CNR-IMM, Via C. Olivetti 2, 20864 Agrate Brianza (MB) (Italy); Dipartimento di Scienza dei Materiali, Università di Milano Bicocca, Via Cozzi 53, 20125 Milano (Italy); De Michielis, M. [Laboratorio MDM, CNR-IMM, Via C. Olivetti 2, 20864 Agrate Brianza (MB) (Italy); Mazzeo, G.; Fanciulli, M. [Laboratorio MDM, CNR-IMM, Via C. Olivetti 2, 20864 Agrate Brianza (MB) (Italy); Dipartimento di Scienza dei Materiali, Università di Milano Bicocca, Via Cozzi 53, 20125 Milano (Italy); Prati, E. [Laboratorio MDM, CNR-IMM, Via C. Olivetti 2, 20864 Agrate Brianza (MB) (Italy); Istituto di Fotonica e Nanotecnologie, CNR, Piazza Leonardo da Vinci 32, 20133 Milano (Italy)

    2016-03-11

    We report on the fabrication and the characterization of a tunable complementary-metal oxide semiconductor (CMOS) system consisting of two quantum dots and a MOS single electron transistor (MOSSET) charge sensor. By exploiting a compact T-shaped design and few gates fabricated by electron beam lithography, the MOSSET senses the charge state of either a single or double quantum dot at 4.2 K. The CMOS compatible fabrication process, the simplified control over the number of quantum dots and the scalable geometry make such architecture exploitable for large scale fabrication of multiple spin-based qubits in circuital quantum information processing. - Highlights: • Charge sensing of tunable, by position and number, quantum dots is demonstrated. • A compact T-shaped design with five gates at a single metalization level is proposed. • The electrometer is a silicon-etched nanowire acting as a disorder tolerant MOSSET.

  5. Analysis of laboratory compaction methods of roller compacted concrete

    Science.gov (United States)

    Trtík, Tomáš; Chylík, Roman; Bílý, Petr; Fládr, Josef

    2017-09-01

    Roller-Compacted Concrete (RCC) is an ordinary concrete poured and compacted with machines typically used for laying of asphalt road layers. One of the problems connected with this technology is preparation of representative samples in the laboratory. The aim of this work was to analyse two methods of preparation of RCC laboratory samples with bulk density as the comparative parameter. The first method used dynamic compaction by pneumatic hammer. The second method of compaction had a static character. The specimens were loaded by precisely defined force in laboratory loading machine to create the same conditions as during static rolling (in the Czech Republic, only static rolling is commonly used). Bulk densities obtained by the two compaction methods were compared with core drills extracted from real RCC structure. The results have shown that the samples produced by pneumatic hammer tend to overestimate the bulk density of the material. For both compaction methods, immediate bearing index test was performed to verify the quality of compaction. A fundamental difference between static and dynamic compaction was identified. In static compaction, initial resistance to penetration of the mandrel was higher, after exceeding certain limit the resistance was constant. This means that the samples were well compacted just on the surface. Specimens made by pneumatic hammer actively resisted throughout the test, the whole volume was uniformly compacted.

  6. 海洋油气开发用水下紧凑型多相分离技术%Underwater Compact Multiphase Separation Technology for Offshore Petroleum Development

    Institute of Scientific and Technical Information of China (English)

    李锐锋; 陈家庆; 姬宜朋; 李汉勇; 王春升

    2012-01-01

    The seafloor multistage separation technology is the key to the subsea oil and gas processing technology in offshore pe-troleum development as well as an important part of underwater production system. Distinguished international petroleum companies have attached great importance to the underwater compact multistage separation technology in recent years, developing some new underwater compact multistage separation technologies and equipments. The paper introduces the structure and operating principle of seabed vertical caisson separator, vertical vessel separator, horizontal single coil pipe separator and vertical multi-pipe separator. The history of devel-opment and the corresponding progress of engineering cases are also introduced. Part of the paper tocuses on the technological scheme for gas-liquid separation of produced fluid of oil well, which breaks the traditional thinking pattern in umltiphase separator design and provides the referenee for domestic researchers in independent development of the compact muhiphase separation technology.%海底多相分离技术是海洋油气开发中海底处理技术的核心,也是水下生产系统的重要组成部分。世界知名石油公司近年来非常重视水下紧凑型多相分离技术,研制开发了多种新型水下紧凑型多相分离技术和设备。介绍了海底立式沉箱类分离器、立式容器类分离器、卧式单根盘管式分离器、立式多管分离器等的结构和工作原理,并介绍了研发历程和相应的工程案例进展。部分侧重于进行油井产出液气一液分离用的技术方案打破了多相分离器设计的传统思维模式,为国内相关人员自主研发紧凑型多相分离技术提供了参考指导。

  7. Excimer Emission from Direct Current Microhollow Cathode Discharges

    Science.gov (United States)

    Stark, R. H.; El-Habachi, A.; Shi, W.; Schoenbach, K. H.

    1997-10-01

    Reducing the dimensions of the cathode hole to less than 200 micrometer has allowed us to operate argon discharges in a hollow cathode discharge mode, dc, up to pressures of one atmosphere. Spectral measurements in the VUV have shown that the microdischarges are strong sources of argon excimer radiation at 128 nm. This points to a nonthermal electron energy distribution where a considerable part of the electrons have energies exceeding the ionization potential of argon. Whereas the discharges in argon were dc up to atmospheric pressure, discharges in xenon became unstable at pressures exceeding 300 Torr, and current spikes were observed. The xenon excimer emission at 172 nm, however, was found to increase, independent of the mode, dc or pulsed, when the pressure was increased to one atmosphere. The microdischarges have resistive current-voltage characteristics. This has allowed us to generate simple arrays of these discharges, with possible applications as flat panel excimer lamps.

  8. OFI argon excimer amplifier for intense subpicosecond VUV pulse generation

    Science.gov (United States)

    Kaku, M.; Kubodera, S.; Oda, K.; Katto, M.; Yokotani, A.; Miyanaga, N.; Mima, K.

    2008-10-01

    We have demonstrated an OFI Ar2* excimer VUV amplifier at 126 nm pumped by a high-intensity laser in the table top size. We observed the Ar2 * excimer emission centered at 126 nm with the spectral bandwidth of 10 nm (FWHM), which was produced in the OFI plasma. Significant amplification was observed inside the OFI Ar2 * excimer as a result of the optical feedback provided by a VUV reflector. The gain-length product of 5.6 was observed at the Ar pressure of 11 atm. The population inversion density on the order of 1017 cm-3 was evaluated inside the OFI plasma, which would be sufficient for the amplification of a subpicosecond VUV pulse at 126 nm produced by the harmonic generation.

  9. Nucleation, solvation and boiling of helium excimer clusters

    CERN Document Server

    Luna, Luis G Mendoza; Watkins, Mark J; Bonifaci, Nelly; Aitken, Frederic; von Haeften, Klaus

    2015-01-01

    Helium excimers generated by a corona discharge were investigated in the gas and normal liquid phases of helium as a function of temperature and pressure between 3.8 and 5.0 K and 0.2 and 5.6 bar. Intense fluorescence in the visible region showed the rotationally resolved $d^3\\Sigma_u^+ \\rightarrow b^3\\Pi_g$ transition of He$_2^*$. With increasing pressure, the rotational lines merged into single features. The observed pressure dependence of linewidths, shapes and lineshifts established phases of coexistence and separation of excimer-helium mixtures, providing detailed insight into nucleation, solvation and boiling of He$_2^*$-He$_n$ clusters.

  10. Proceedings of the seventh symposium on the physics and technology of compact toroids in the Magnetic Fusion Energy Program

    Energy Technology Data Exchange (ETDEWEB)

    Sherwood, A.R. (comp.)

    1986-09-01

    The Seventh Symposium on Compact Toroid (CT) Research was held in Santa Fe, New Mexico, on May 21-23, 1985. As has been the case for the last few CT symposia, CT research progress was reported in a combination of invited talks and poster sessions. The following record of these presentations in the form of four page papers is in keeping with the format followed in previous years. We have continued the practice of dividing the papers into three subject categories - spheromak, FRC (Field Reversed Configuration), and other (mostly particle rings).

  11. Development of Solid State Laser Technology

    Energy Technology Data Exchange (ETDEWEB)

    Cha, Byung Heon; Kwon, Seong Ok; Kim, Yong Ki (and others)

    2007-04-15

    Recently, diode-pumped solid state lasers(DPSSL) have been developed to have a diffraction limited beam quality and high average output powers beyond kW. The lifetime extends to have several thousand hours. Due to such merits, the DPSSLs are now replacing previous application fields of CO{sub 2} laser, lamp-pumped solid-state lasers, Excimer laser, etc. The DPSSLs have broad application fields, such as laser spectroscopy and analysis, laser micromachining, precision measurement, laser range findings, laser pump sources, medical lasers, etc. In this project, various DPSSLs are developed for use in laser isotope production. Many new laser modules are designed and used to develop high power pulsed IR lasers and green lasers. In addition, a quasi CW driven compact DPSSL is developed to have high pulse energy DPSSL technologies.

  12. Emission and gain studies of the Tl-Hg excimer

    Energy Technology Data Exchange (ETDEWEB)

    Chilukuri, S.; Nayfeh, M.H.

    1978-11-01

    The pressure and temperature dependence of the Tl-Hg excimer emission in the visible from an rf excited discharge has been studied. The gain of the system in the blue band at 4585 A is probed with an Ar-ion laser. With gain sensitivity limited to 1/2% due to beam steering and defocusing effects, the system has no gain.

  13. Modeling of Kr-Xe discharge of excimer lamp

    Directory of Open Access Journals (Sweden)

    Belasri A.

    2013-03-01

    Full Text Available This paper reports the numerical simulation of Dielectric Barrier Discharge (DBD for Kr-Xe excilamp. The model of the discharge consists of three main modules: a plasma chemistry module, a circuit module and a Boltzmann equation module. The results predict the optimal operating conditions and describe the electrical and chemical properties of the KrXe* excimer lamp.

  14. Narrow band tuning with small long pulse excimer lasers

    Energy Technology Data Exchange (ETDEWEB)

    Sze, R.C.; Kurnit, N.; Watkins, D.; Bigio, I.

    1985-12-01

    We discuss frequency narrowing and tuning with simple dispersion elements with small long-pulse excimer lasers. The improved performance over short-pulse lasers is discussed and attributed to the increased number of round trips. A physical model of the dynamics of line narrowing is presented.

  15. The LCPDI: A Compact and Robust Phase-Shifting Point-Diffraction Interferometer Based on Dye-Doped LC Technology

    Energy Technology Data Exchange (ETDEWEB)

    Marshall, K.L.; Adelsberger, K.; Myhre, G.; Griffin, D.W.

    2006-08-18

    Point-diffraction interferometers, by design, are much less sensitive to environmental disturbances than dual-path interferometers, but, until very recently, have not been capable of phase shifting. The liquid crystal point diffraction interferometer (LCPDI) utilizes a dye-doped, liquid crystal (LC), electro-optical device that functions as both the point-diffraction source and the phase-shifting element, yielding a phase-shifting diagnostic device that is significantly more compact and robust while also using fewer optical elements than conventional dual-path interferometers. These attributes make the LCPDI of special interest for diagnostic applications in the scientific, commercial, military, and industrial sectors, where vibration insensitivity, power requirements, size, weight, and cost are critical issues.

  16. Preparation and evaluation of colon targeted drug delivery systems for albendazole using kneading, extrusion and compaction technology

    Institute of Scientific and Technical Information of China (English)

    Martins EMEJE; Phyllis NWABUNIKE; Yetunde ISIMI; Olobayo KUNLE; Sabinus OFOEFULE

    2009-01-01

    Albendazole is an orally administered broad-spectrum benzimidazole anthelmintic used against helminthiasis, hydatid cyst disease and neurocysticercosis. The objectives of this investigation are to develop a sustained release drug delivery system for albendazole, and to target its delivery to colon. Albendazole matrix tablets containing varying proportions of single and binary blends of four polymers; polyacrylic acid (carbopol 971), ethylcellulose (Etcell), eudragit L100-55 (EUD), and sodium carboxymethyl cellulose (CMC) were prepared by a modified wet granulation technique of kneading, extrusion and compaction. In vitro release profiles of albendazole was sequentially determined in simulated gastric fluid (SGF), simulated intestinal fluid (SIF) without enzymes and in rat caecal content medium (RCCM) at 37℃. The in vitro drug release from matrix tablets containing CMC and Etcell as single polymers showed initial burst effect in the first 2 h (>20% and 50% respectively), followed by a slow release in SIE However, matrix tablets containing polymer blends showed that no appreciable drug release occurred up to 5 h. Drug release from tablets containing polymer blends in the dissolution medium containing rat caecal material suddenly increased to ≥30% after 5 h (RCCM), and reaching up to 90% in 24 h. Albendazole matrix tablets containing carbopol 971, Etcell, EUD, and CMC as single polymers and as blends were formulated for oral use. Drug release from the tablet matrices containing carbopol alone, binary blends of carbopol/Etcell, and CMC/EUD were found to be very slow and dependent on polymer concentration. Matrix tablets containing blends of these polymers formulated using kneading, extrusion and compaction technique could provide sustained drug release and can be utilized in the colonic delivery of albendazole.

  17. Motion Analysis of Fiber Band in Compact Field of Compact Spinning

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The technological process of compact spinning and the compact procedure of fiber band in compact field are briefly illustrated. The motions of fiber band in compact field are discussed theoretically from which tilting angle of suction slot in profile tube, additional twists created by fiber band's rotating around its own axis and ultimate twists in compact yarn are deduced accordingly. The existence of additional twists is also verified through experiments.

  18. Mesoscale Laser Processing using Excimer and Short-Pulse Ti: Sapphire Lasers

    Energy Technology Data Exchange (ETDEWEB)

    Shirk, M D; Rubenchik, A M; Gilmer, G H; Stuart, B C; Armstrong, J P; Oberhelman, S K; Baker, S L; Nikitin, A J; Mariella, R P

    2003-07-28

    Targets to study high-energy density physics and inertial confinement fusion processes have very specific and precise tolerances that are pushing the state-of-the-art in mesoscale microsculpting technology. A significant effort is required in order to advance the capabilities to make these targets with very challenging geometries. Ultrashort pulsed (USP) Ti:Sapphire lasers and excimer lasers are proving to be very effective tools in the fabrication of the very small pieces that make up these targets. A brief description of the dimensional and structural requirements of these pieces will be presented, along with theoretical and experimental results that demonstrate to what extent these lasers are achieving the desired results, which include sub-{mu}m precision and RMS surface values well below 100 nm. This work indicates that excimer lasers are best at sculpting the polymer pieces and that the USP lasers work quite well on metal and aerogel surfaces, especially for those geometries that cannot be produced using diamond machining and where material removal amounts are too great to do with focused ion beam milling in a cost effective manner. In addition, the USP laser may be used as part of the procedure to fill target capsules with fusion fuel, a mixture of deuterium and tritium, without causing large perturbations on the surface of the target by keeping holes drilled through 125 {micro}m of beryllium below 5 {micro}m in diameter.

  19. The development and progress of XeCl Excimer laser system

    Science.gov (United States)

    Zhang, Yongsheng; Ma, Lianying; Wang, Dahui; Zhao, Xueqing; Zhu, Yongxiang; Hu, Yun; Qian, Hang; Shao, Bibo; Yi, Aiping; Liu, Jingru

    2015-05-01

    A large angularly multiplexed XeCl Excimer laser system is under development at the Northwest Institute of Nuclear Technology (NINT). It is designed to explore the technical issues of uniform and controllable target illumination. Short wavelength, uniform and controllable target illumination is the fundamental requirement of high energy density physics research using large laser facility. With broadband, extended light source and multi-beam overlapping techniques, rare gas halide Excimer laser facility will provide uniform target illumination theoretically. Angular multiplexing and image relay techniques are briefly reviewed and some of the limitations are examined to put it more practical. The system consists of a commercial oscillator front end, three gas discharge amplifiers, two electron beam pumped amplifiers and the optics required to relay, encode and decode the laser beam. An 18 lens array targeting optics direct and focus the laser in the vacuum target chamber. The system is operational and currently undergoing tests. The total 18 beams output energy is more than 100J and the pulse width is 7ns (FWHM), the intensities on the target will exceed 1013W/cm2. The aberration of off-axis imaging optics at main amplifier should be minimized to improve the final image quality at the target. Automatic computer controlled alignment of the whole system is vital to efficiency and stability of the laser system, an array of automatic alignment model is under test and will be incorporated in the system soon.

  20. Towards excimer-laser-based stereolithography: a rapid process to fabricate rigid biodegradable photopolymer scaffolds.

    Science.gov (United States)

    Beke, S; Anjum, F; Tsushima, H; Ceseracciu, L; Chieregatti, E; Diaspro, A; Athanassiou, A; Brandi, F

    2012-11-01

    We demonstrate high-resolution photocross-linking of biodegradable poly(propylene fumarate) (PPF) and diethyl fumarate (DEF) using UV excimer laser photocuring at 308 nm. The curing depth can be tuned in a micrometre range by adjusting the total energy dose (total fluence). Young's moduli of the scaffolds are found to be a few gigapascal, high enough to support bone formation. The results presented here demonstrate that the proposed technique is an excellent tool for the fabrication of stiff and biocompatible structures on a micrometre scale with defined patterns of high resolution in all three spatial dimensions. Using UV laser photocuring at 308 nm will significantly improve the speed of rapid prototyping of biocompatible and biodegradable polymer scaffolds and enables its production in a few seconds, providing high lateral and horizontal resolution. This short timescale is indeed a tremendous asset that will enable a more efficient translation of technology to clinical applications. Preliminary cell tests proved that PPF : DEF scaffolds produced by excimer laser photocuring are biocompatible and, therefore, are promising candidates to be applied in tissue engineering and regenerative medicine.

  1. Efficient VUV light sources from rare gas excimers and their applications

    Science.gov (United States)

    Sasaki, Wataru; Kubodera, Shoichi; Kawanaka, Junji

    1997-04-01

    Efficient VUV excimer lamps with two types of discharge configurations, expanding jet discharge and silent discharge (dielectric-barrier discharge) in a variety of rare gases and their mixtures, are presented. In the jet discharges VUV output power was 9 mW with an efficiency of 10-2% at 126 nm for argon excimers. Output powers of other excimers were 300 mW with 1.0% efficiency at 146 nm for krypton excimers and 500 mW with 1.6% efficiency at 176 nm for xenon excimers. Simultaneous emissions from hetero-nuclear rare gas excimers (ArKr*, 135 nm) as well as homo-nuclear rare gas excimers (Ar2* and Kr2*) were observed by using rare gas mixtures of argon and krypton. Output powers and efficiencies of the silent discharge excimer lamps were 500 mW and 1.6% for argon, 5 W and 13% for krypton, and 5 W and 20% for xenon excimers. In the silent discharge extremely broad band excimer emissions were observed at the center wavelengths of 145 nm for an argon/krypton mixture and of 163 nm for a krypton/xenon mixture. A PMMA plate was photo-chemically etched at the rates of 1 - 2 nm/min by the irradiation of the 172 nm radiation in air and argon gas atmospheres.

  2. Compact Integration of a GSM-19 Magnetic Sensor with High-Precision Positioning using VRS GNSS Technology

    Directory of Open Access Journals (Sweden)

    Santiago Belda

    2009-04-01

    Full Text Available Magnetic data consists of a sequence of collected points with spatial coordinates and magnetic information. The spatial location of these points needs to be as exact as possible in order to develop a precise interpretation of magnetic anomalies. GPS is a valuable tool for accomplishing this objective, especially if the RTK approach is used. In this paper the VRS (Virtual Reference Station technique is introduced as a new approach for real-time positioning of magnetic sensors. The main advantages of the VRS approach are, firstly, that only a single GPS receiver is needed (no base station is necessary, reducing field work and equipment costs. Secondly, VRS can operate at distances separated 50-70 km from the reference stations without degrading accuracy. A compact integration of a GSM-19 magnetometer sensor with a geodetic GPS antenna is presented; this integration does not diminish the operational flexibility of the original magnetometer and can work with the VRS approach. The coupled devices were tested in marshlands around Gandia, a city located approximately 100 km South of Valencia (Spain, thought to be the site of a Roman cemetery. The results obtained show adequate geometry and high-precision positioning for the structures to be studied (a comparison with the original low precision GPS of the magnetometer is presented. Finally, the results of the magnetic survey are of great interest for archaeological purposes.

  3. Compact Integration of a GSM-19 Magnetic Sensor with High-Precision Positioning using VRS GNSS Technology.

    Science.gov (United States)

    Martín, Angel; Padín, Jorge; Anquela, Ana Belén; Sánchez, Juán; Belda, Santiago

    2009-01-01

    Magnetic data consists of a sequence of collected points with spatial coordinates and magnetic information. The spatial location of these points needs to be as exact as possible in order to develop a precise interpretation of magnetic anomalies. GPS is a valuable tool for accomplishing this objective, especially if the RTK approach is used. In this paper the VRS (Virtual Reference Station) technique is introduced as a new approach for real-time positioning of magnetic sensors. The main advantages of the VRS approach are, firstly, that only a single GPS receiver is needed (no base station is necessary), reducing field work and equipment costs. Secondly, VRS can operate at distances separated 50-70 km from the reference stations without degrading accuracy. A compact integration of a GSM-19 magnetometer sensor with a geodetic GPS antenna is presented; this integration does not diminish the operational flexibility of the original magnetometer and can work with the VRS approach. The coupled devices were tested in marshlands around Gandia, a city located approximately 100 km South of Valencia (Spain), thought to be the site of a Roman cemetery. The results obtained show adequate geometry and high-precision positioning for the structures to be studied (a comparison with the original low precision GPS of the magnetometer is presented). Finally, the results of the magnetic survey are of great interest for archaeological purposes.

  4. Compact Vortices

    CERN Document Server

    Bazeia, D; Marques, M A; Menezes, R; Zafalan, I

    2016-01-01

    We study a family of Maxwell-Higgs models, described by the inclusion of a function of the scalar field that represent generalized magnetic permeability. We search for vortex configurations which obey first-order differential equations that solve the equations of motion. We first deal with the asymptotic behavior of the field configurations, and then implement a numerical study of the solutions, the energy density and the magnetic field. We work with the generalized permeability having distinct profiles, giving rise to new models, and we investigate how the vortices behave, compared with the solutions of the corresponding standard models. In particular, we show how to build compact vortices, that is, vortex solutions with the energy density and magnetic field vanishing outside a compact region of the plane.

  5. Compact vortices

    Energy Technology Data Exchange (ETDEWEB)

    Bazeia, D.; Losano, L.; Marques, M.A.; Zafalan, I. [Universidade Federal da Paraiba, Departamento de Fisica, Joao Pessoa, PB (Brazil); Menezes, R. [Universidade Federal da Paraiba, Departamento de Ciencias Exatas, Rio Tinto, PB (Brazil); Universidade Federal de Campina Grande, Departamento de Fisica, Campina Grande, PB (Brazil)

    2017-02-15

    We study a family of Maxwell-Higgs models, described by the inclusion of a function of the scalar field that represent generalized magnetic permeability. We search for vortex configurations which obey first-order differential equations that solve the equations of motion. We first deal with the asymptotic behavior of the field configurations, and then implement a numerical study of the solutions, the energy density and the magnetic field. We work with the generalized permeability having distinct profiles, giving rise to new models, and we investigate how the vortices behave, compared with the solutions of the corresponding standard models. In particular, we show how to build compact vortices, that is, vortex solutions with the energy density and magnetic field vanishing outside a compact region of the plane. (orig.)

  6. Formation of pyrene excimers in mesoporous ormosil thin films for visual detection of nitro-explosives.

    Science.gov (United States)

    Beyazkilic, Pinar; Yildirim, Adem; Bayindir, Mehmet

    2014-04-09

    We report the preparation of mesoporous thin films with bright pyrene excimer emission and their application in visual and rapid detection of nitroaromatic explosive vapors. The fluorescent films were produced by physically encapsulating pyrene molecules in the organically modified silica (ormosil) networks which were prepared via a facile template-free sol-gel method. Formation and stability of pyrene excimer emission were investigated in both porous and nonporous ormosil thin films. Excimer emission was significantly brighter and excimer formation ability was more stable in porous films compared to nonporous films. Rapid and selective quenching was observed in the excimer emission against vapors of nitroaromatic molecules; trinitrotoluene (TNT), dinitrotoluene (DNT), and nitrobenzene (NB). Fluorescence quenching of the films can be easily observed under UV light, enabling the naked-eye detection of nitro-explosives. Furthermore, excimer emission signal can be recovered after quenching and the films can be reused at least five times.

  7. Towards the in-situ detection of a single He2 * excimer in superfluid helium

    Science.gov (United States)

    Carter, Faustin; Hertel, Scott; Rooks, Michael; Prober, Daniel; McKinsey, Daniel

    2014-03-01

    Incident radiation can excite superfluid helium into a diatomic He2* excimer, which decays through the emission of a 15 eV photon. Such excimers have been used as tracers to measure the superfluid's quantum turbulence, thanks partly to the long half-life of the He2* triplet state (13 seconds). However, the efficient detection of these excimers remains a challenge. We present a detector capable of in-situ detection of the He2* excimers either directly (the excimer collides with the detector), or by collecting the 15 eV photon emission upon decay. This detector is based on a tungsten superconducting transition edge sensor and is designed to operate near 100 mK in a dilution refrigerator. We will discuss operating characteristics and present preliminary data with an aim towards the detection of a single excimer.

  8. Nitridation in Photon-Assisted Process Using Argon Excimer Lamp

    Science.gov (United States)

    Toshikawa, Kiyohiko; Amari, Kouichi; Ishimura, Sou; Katto, Masahito; Yokotani, Atsushi; Kurosawa, Kou

    2006-05-01

    We attempted silicon nitridation that continuously deposits silicon with monosilane (SiH4) and nitrides the silicon with ammonia (NH3) at a low temperature using a vacuum ultraviolet excimer lamp. We used an argon excimer lamp (λ=126 nm, h ν=9.8 eV) so that SiH4 and NH3 can absorb photons and dissociate. Nitrogen exists only near the film surface at a low temperature, and its concentration increases at a high temperature. This photon-assisted process is very feasible for the nitridation of semiconductor devices and flat panel displays in the near future, because it is a low-temperature and low-damage process.

  9. Triggering Excimer Lasers by Photoionization from Corona Discharges

    Science.gov (United States)

    Xiong, Zhongmin; Duffey, Thomas; Brown, Daniel; Kushner, Mark

    2009-10-01

    High repetition rate ArF (192 nm) excimer lasers are used for photolithography sources in microelectronics fabrication. In highly attaching gas mixtures, preionization is critical to obtaining stable, reproducible glow discharges. Photoionization from a separate corona discharge is one technique for preionization which triggers the subsequent electron avalanche between the main electrodes. Photoionization triggering of an ArF excimer laser sustained in multi-atmosphere Ne/Ar/F2/Xe gas mixtures has been investigated using a 2-dimensional plasma hydrodynamics model including radiation transport. Continuity equations for charged and neutral species, and Poisson's equation are solved coincident with the electron temperature with transport coefficients obtained from solutions of Boltzmann's equation. Photoionizing radiation is produced by a surface discharge which propagates along a corona-bar located adjacent to the discharge electrodes. The consequences of pulse power waveform, corona bar location, capacitance and gas mixture on uniformity, symmetry and gain of the avalanche discharge will be discussed.

  10. Corneal surface morphology following excimer laser ablation with humidified gases.

    Science.gov (United States)

    Krueger, R R; Campos, M; Wang, X W; Lee, M; McDonnell, P J

    1993-08-01

    To compare the effects of blowing dry (nitrogen or helium) and humidified gases over the corneal surface during photorefractive keratectomy. Excimer laser myopic ablations were performed on porcine eyes (10 per group) using humidified and dry nitrogen and helium gas under ambient conditions. Surface smoothness was quantified with light and electron microscopy. Corneas that were ablated using humidified gas were smooth and equivalent to those ablated under ambient conditions. Dry nitrogen and helium blowing resulted in increased surface irregularity evident on light and electron microscopy (P excimer laser corneal ablation produces a smoother surface than does the blowing of dry gas and is comparable to that produced under ambient (no blowing) conditions. Maintaining corneal moisture is important in photorefractive keratectomy. If blowing gas is necessary to remove debris from the surface, the gas should be humidified.

  11. Surface Modification of Titanium Dental Implants by Excimer Laser

    OpenAIRE

    Radnai, M; Bereznai, M.; Pelseczi, I.; Z. Toth; Turzo, K.; Bor, Z.; Fazekas, A

    2002-01-01

    The perfect osseointegration process of the dental implants depends among other factors on the surfact characteristics of the titanium. In this study enlarged mechanical roughness was produced by a laser-based technique, in order to decrease the healing period of the implant. There are different ways of forming laser induced surface structures. In the case of mask projection techniques the surface can be modified in larger areas and surface patterns. An ArF nanosecond excimer laser was use...

  12. Automatic alignment of double optical paths in excimer laser amplifier

    Science.gov (United States)

    Wang, Dahui; Zhao, Xueqing; Hua, Hengqi; Zhang, Yongsheng; Hu, Yun; Yi, Aiping; Zhao, Jun

    2013-05-01

    A kind of beam automatic alignment method used for double paths amplification in the electron pumped excimer laser system is demonstrated. In this way, the beams from the amplifiers can be transferred along the designated direction and accordingly irradiate on the target with high stabilization and accuracy. However, owing to nonexistence of natural alignment references in excimer laser amplifiers, two cross-hairs structure is used to align the beams. Here, one crosshair put into the input beam is regarded as the near-field reference while the other put into output beam is regarded as the far-field reference. The two cross-hairs are transmitted onto Charge Coupled Devices (CCD) by image-relaying structures separately. The errors between intersection points of two cross-talk images and centroid coordinates of actual beam are recorded automatically and sent to closed loop feedback control mechanism. Negative feedback keeps running until preset accuracy is reached. On the basis of above-mentioned design, the alignment optical path is built and the software is compiled, whereafter the experiment of double paths automatic alignment in electron pumped excimer laser amplifier is carried through. Meanwhile, the related influencing factors and the alignment precision are analyzed. Experimental results indicate that the alignment system can achieve the aiming direction of automatic aligning beams in short time. The analysis shows that the accuracy of alignment system is 0.63μrad and the beam maximum restoration error is 13.75μm. Furthermore, the bigger distance between the two cross-hairs, the higher precision of the system is. Therefore, the automatic alignment system has been used in angular multiplexing excimer Main Oscillation Power Amplification (MOPA) system and can satisfy the requirement of beam alignment precision on the whole.

  13. Xenon excimer emission from multicapillary discharges in direct current mode

    OpenAIRE

    Lee, Byung-Joon; Rahaman, Hasibur; Nam, Sang Hoon; Giapis, Konstantinos P.; Iberler, Marcus; Jacoby, Joachim; Frank, Klaus

    2012-01-01

    Microdischarges in xenon have been generated in a pressure range of 400–1013 mbar with a fixed flow rate of 100 sccm. These microdischarges are obtained from three metallic capillary tubes in series for excimer emission. Total discharge voltage is thrice as large as that of a single capillary discharge tube at current levels of up to 12 mA. Total spectral irradiance of vacuum ultraviolet (VUV) emission also increases significantly compared to that of the single capillary discharge. Further, t...

  14. Simulation of pulsed dielectric barrier discharge xenon excimer lamp

    Science.gov (United States)

    Bogdanov, E. A.; Kudryavtsev, A. A.; Arslanbekov, R. R.; Kolobov, V. I.

    2004-11-01

    Recently, it has been shown that the efficiency of excimer lamps can be drastically increased in a pulsed regime. A one-dimensional simulation of pulsed excimer lamps has been performed by Carman and Mildren (2003 J. Phys. D: Appl. Phys. 36 19) (C&M). However, some computational results of the work of C&M are questionable and need to be revisited. In this paper, a dielectric barrier discharge (DBD) in xenon has been simulated for operating conditions similar to those of C&M to better understand plasma dynamics in a pulsed regime. Our simulation results differ considerably from the computational results of C&M. Although these differences do not affect profoundly the plasma macro parameters measured in the C&M experiments, they offer a better understanding of plasma dynamics in pulsed DBDs and form a solid foundation for computational optimization of excimer lamps. It was found that the dynamics of breakdown and the current pulse depend significantly on the initial densities of species after a previous pulse, and so it is important to accurately simulate the plasma evolution in both the afterglow and active stages. It seems possible to modify the power deposition in the plasma by varying external discharge parameters such as the amplitude and the rise time of the applied voltage, and to modify the plasma composition by changing the pulse repetition rate and plasma decay in the afterglow stage.

  15. Simulation of pulsed dielectric barrier discharge xenon excimer lamp

    Energy Technology Data Exchange (ETDEWEB)

    Bogdanov, E A [St Petersburg State University, St Petersburg (Russian Federation); Kudryavtsev, A A [St Petersburg State University, St Petersburg (Russian Federation); Arslanbekov, R R [CFD Research Corporation, Huntsville (United States); Kolobov, V I [CFD Research Corporation, Huntsville (United States)

    2004-11-07

    Recently, it has been shown that the efficiency of excimer lamps can be drastically increased in a pulsed regime. A one-dimensional simulation of pulsed excimer lamps has been performed by Carman and Mildren (2003 J. Phys. D: Appl. Phys. 36 19) (C and M). However, some computational results of the work of C and M are questionable and need to be revisited. In this paper, a dielectric barrier discharge (DBD) in xenon has been simulated for operating conditions similar to those of C and M to better understand plasma dynamics in a pulsed regime. Our simulation results differ considerably from the computational results of C and M. Although these differences do not affect profoundly the plasma macro parameters measured in the C and M experiments, they offer a better understanding of plasma dynamics in pulsed DBDs and form a solid foundation for computational optimization of excimer lamps. It was found that the dynamics of breakdown and the current pulse depend significantly on the initial densities of species after a previous pulse, and so it is important to accurately simulate the plasma evolution in both the afterglow and active stages. It seems possible to modify the power deposition in the plasma by varying external discharge parameters such as the amplitude and the rise time of the applied voltage, and to modify the plasma composition by changing the pulse repetition rate and plasma decay in the afterglow stage.

  16. Impacts of excimer laser annealing on Ge epilayer on Si

    Science.gov (United States)

    Huang, Zhiwei; Mao, Yichen; Yi, Xiaohui; Lin, Guangyang; Li, Cheng; Chen, Songyan; Huang, Wei; Wang, Jianyuan

    2017-02-01

    The impacts of excimer laser annealing on the crystallinity of Ge epilayers on Si substrate grown by low- and high-temperature two-step approach in an ultra-high vacuum chemical vapor deposition system were investigated. The samples were treated by excimer laser annealing (ELA) at various laser power densities with the temperature above the melting point of Ge, while below that of Si, resulting in effective reduction of point defects and dislocations in the Ge layer with smooth surface. The full-width at half-maximum (FWHM) of X-ray diffraction patterns of the low-temperature Ge epilayer decreases with the increase in laser power density, indicating the crystalline improvement and negligible effect of Ge-Si intermixing during ELA processes. The short laser pulse time and large cooling rate cause quick melting and recrystallization of Ge epilayer on Si in the non-thermal equilibrium process, rendering tensile strain in Ge epilayer as calculated quantitatively with thermal mismatch between Si and Ge. The FWHM of X-ray diffraction patterns is significantly reduced for the two-step grown samples after treated by a combination of ELA and conventional furnace thermal annealing, indicating that the crystalline of Ge epilayer is improved more effectively with pre- annealing by excimer laser.

  17. Electrodeless excimer laser; Laser a eccimeri senza elettrodi

    Energy Technology Data Exchange (ETDEWEB)

    Lisi, N. [ENEA, Divisione Nuovi Materiali, Centro Ricerche Casaccia, Rome (Italy)

    2001-07-01

    In this paper it is proposed how to build an excimer laser based on an electrodeless discharge (or Dielectric Barrier Discharge). Such laser could operate with a low energy per pulse (<100 mJ) and a high repetition rate (<100 kHz). The most relevant advantage an electrodeless DBD laser is the much longer gas mixture lifetime. This feature could allow the operation of a sealed laser emitting higher average power with respect to commercially available excimer lasers. Such discharge scheme could be advantageous in order to excite the F{sub 2} excimer molecule, whose emission wavelength in the VUV range (157 nm) at high reprate is particularly interesting in the micro-lithography field. [Italian] In questo documento viene proposto come costruire un laser a eccimeri basato su una scarica priva di elettrodi, o Dielectric Barrier Discharge. Tale laser puo' funzionare con una bassa energia per impulso (<100 mJ) ad alta frequenza di ripetizione (<100 kHz). Il vantaggio fondamentale di un laser a DBD e quindi privo di elettrodi e' la vita media della miscela gassosa molto piu' alta che potrebbe permettere alla camera laser di operare sigillata ad una potenza media superiore a quella dei laser a eccimeri attuali. Tale schema di pompaggio potrebbe essere particolarmente vantaggioso per eccitare la molecola eccimero F{sub 2} la cui lunghezza di emissione nel VUV (157 nm) ad elevata frequenza di ripetizione presenta un notevole interesse nel campo della produzione di microcircuiti.

  18. Excimer surface treatment to enhance bonding in coated steels

    Science.gov (United States)

    Mueller, Robert E.; Olfert, M.; Duley, Walter W.; North, T.; Hood, J.; Sakai, D.

    1996-04-01

    Zinc coated sheet steel in the form of temper rolled galvanize and galvanneal are used extensively in the automotive industry. Through a process of excimer laser surface treatment, we have succeeded in significantly enhancing the adhesion characteristics of these coated steels. The laser treatment is performed by scanning focused excimer laser radiation in a raster pattern over the surface to be bonded. Adhesion tests have been carried out in the form of T peel tests, using either a hot melt nylon resin or an epoxy as the adhesive. An increase in bond strength was observed over a substantial range of surface treatment conditions. The largest improvement observed was more than a factor of three greater than for untreated surfaces. With the improved surface condition, the bond strength became limited by the cohesive strength of the adhesive. The physical structure and chemical composition of the parent and excimer treated surfaces have been examined using scanning electron microscopy and X-ray photoelectron spectroscopy to determine the nature and extent of the changes caused by the surface treatment. The effects of the observed changes on the bonding performance will be discussed. Surfaces have been processed under an inert atmosphere to isolate the effects of physical surface modification and surface oxidation. An attempt will be made to correlate the surface changes with the bonding characteristics and thereby indicate which changes are most beneficial. The ultimate goal is to optimize the surface condition for bonding and maximize the process rate.

  19. A comparison of MESFET and HEMT MMIC technologies using a compact Ka-band voltage-controlled oscillator

    Science.gov (United States)

    Swirhun, S.; Geddes, J.; Sokolov, Vladimir; Bosch, D.; Gawronski, M.; Anholt, R.

    1991-07-01

    To compare the capability of MESFET and HEMT technologies for monolithic microwave integrated circuit (MMIC) implementation we have fabricated and tested discrete field-effect transistors (FETs) and a novel Ka-band monolithic voltage controlled oscillator (VCO). We implemented the circuit with three different active devices: moderate- and high-doped ion-implanted MESFETs (metal-semiconductor FETs) and AlGaAs/GaAs HEMTs (high electron mobility transistors). A comparison of the measured oscillator phase-noise and an independent comparison of the temperature dependence of MESFET and HEMT RF equivalent circuits yields two general guidelines: MESFETs are preferred over HEMTs for applications requiring low phase-noise and temperature insensitive operation.

  20. 1000kV交流紧凑型输电关键技术研究%Key Technologies of 1000 kV AC Compact Transmission

    Institute of Scientific and Technical Information of China (English)

    胡毅; 万保权; 何慧雯

    2011-01-01

    2008年国网电力科学研究院开始进行特高压单回紧凑型输电关键技术的研究,在总结已取得的特高压输电技术科研成果的基础上,充分利用特高压交流试验基地(武汉)的良好科研条件,根据特高压紧凑型输电线路的特点,开展了多项有针对性的关键技术研究。为此,介绍了包括特高压紧凑型线路电磁环境及导线布置优化、外绝缘特性研究、过电压及绝缘配合、带电作业、金具研制及防舞动措施研究等方面所取得的一系列重要参数和研究结论。并且明确了特高压紧凑型输电关键技术的下一步研究工作重点,指出了需要在导线舞动相问安全间隙控制、进一步减小电晕噪声%The study on the key technologies of ultra high voltage ( UHV) compact transmission line has been started by State Grid Electric Power Research Institute (SGEPRI) scince 2008. By summarizing the previous work on key technologies of UHV transmission line and UHV AC Pilot Project and by fully utilizing the advanced test equipment in UHV AC test base in Wuhan, SGEPRI has researched a number of professional fields, such as electromagnetic environment and layout optimization of conductors, external insulation characteristic, overvoltage and insulation co- ordination, live working, fitting design and measures against galloping of transmission line. And some important pa- rameters and research conclusions have been achieved. According to the research conclusions, we presented the fo- cuses of further work, such as the control of security clearance between phases, reducing further the corona noise, live working, system stability and so on, and the UHV transmission project. technieal reserves for the subsequent compact construction of

  1. Compact fusion reactors

    CERN Document Server

    CERN. Geneva

    2015-01-01

    Fusion research is currently to a large extent focused on tokamak (ITER) and inertial confinement (NIF) research. In addition to these large international or national efforts there are private companies performing fusion research using much smaller devices than ITER or NIF. The attempt to achieve fusion energy production through relatively small and compact devices compared to tokamaks decreases the costs and building time of the reactors and this has allowed some private companies to enter the field, like EMC2, General Fusion, Helion Energy, Lawrenceville Plasma Physics and Lockheed Martin. Some of these companies are trying to demonstrate net energy production within the next few years. If they are successful their next step is to attempt to commercialize their technology. In this presentation an overview of compact fusion reactor concepts is given.

  2. Design and performance characteristics of a krypton chloride ( = 222 nm) excimer laser

    Indian Academy of Sciences (India)

    N S Benerji; N Varshnay; A Singh; Bijendra Singh

    2014-01-01

    Development of a discharge-pumped krypton chloride (KrCl) laser operating at 222 nm wavelength is demonstrated. In this paper the design, successful realization and operating characteristics of KrCl excimer laser are reported. The laser is driven by a simple and efficient excitation technique using automatic UV pre-ionization with discharge-pumped self-sustained capacitor– capacitor (C–C) energy transfer circuit. The experimental investigations including output laser energy, temporal pulse parameters, emission spectra and beam profile of the KrCl laser were recorded. For high repetition rate operation, in-built, compact gas circulation system using tangential blower was incorporated. The laser was operated at 25 kV discharge voltage, gas mixture of 5 mbar HCl, 160 mbar kypton and neon as balance with a total gas pressure of ∼2.5 bar. These experiments produced an efficient and reliable output energy of 25 mJ from an active volume of 60 cm3.

  3. Performance characteristics of an excimer laser (XeCl) with single-stage magnetic pulse compression

    Science.gov (United States)

    Varshnay, N. K.; Singh, A.; Benerji, N. S.

    2017-02-01

    Performance characteristics of an excimer laser (XeCl) with single-stage magnetic pulse compression suitable for material processing applications are presented here. The laser incorporates in-built compact gas circulation and gas cooling to ensure fresh gas mixture between the electrodes for repetitive operation. A magnetically coupled tangential blower is used for gas circulation inside the laser chamber for repetitive operation. The exciter consists of C-C energy transfer circuit and thyratron is used as a high-voltage main switch with single-stage magnetic pulse compression (MPC) between thyratron and the laser electrodes. Low inductance of the laser head and uniform and intense pre-ionization are the main features of the electric circuit used in the laser. A 250 ns rise time voltage pulse was compressed to 100 ns duration with a single-stage magnetic pulse compressor using Ni-Zn ferrite cores. The laser can generate about 150 mJ at ˜100 Hz rep-rate reliably from a discharge volume of 100 cm 3. 2D spatial laser beam profile generated is presented here. The profile shows that the laser beam is completely filled with flat-top which is suitable for material processing applications. The SEM image of the microhole generated on copper target is presented here.

  4. Performance characteristics of an excimer laser (XeCl) with single-stage magnetic pulse compression

    Indian Academy of Sciences (India)

    N K VARSHNAY; A A SINGH; N S BENERJI

    2017-02-01

    Performance characteristics of an excimer laser (XeCl) with single-stage magnetic pulse compression suitable for material processing applications are presented here. The laser incorporates in-built compact gas circulation and gas cooling to ensure fresh gas mixture between the electrodes for repetitive operation. A magnetically coupled tangential blower is used for gas circulation inside the laser chamber for repetitive operation. The exciter consists of C–C energy transfer circuit and thyratron is used as a high-voltage main switch with singlestage magnetic pulse compression (MPC) between thyratron and the laser electrodes. Low inductance of the laser head and uniform and intense pre-ionization are the main features of the electric circuit used in the laser. A 250 ns rise time voltage pulse was compressed to 100 ns duration with a single-stage magnetic pulse compressor using Ni–Zn ferrite cores. The laser can generate about 150 mJ at ∼100 Hz rep-rate reliably from a discharge volumeof 100 cm$^3$. 2D spatial laser beam profile generated is presented here. The profile shows that the laser beam is completely filled with flat-top which is suitable for material processing applications. The SEM image of the microhole generated on copper target is presented here.

  5. Compact magnetic confinement fusion: Spherical torus and compact torus

    Directory of Open Access Journals (Sweden)

    Zhe Gao

    2016-05-01

    Full Text Available The spherical torus (ST and compact torus (CT are two kinds of alternative magnetic confinement fusion concepts with compact geometry. The ST is actually a sub-category of tokamak with a low aspect ratio; while the CT is a toroidal magnetic configuration with a simply-connected geometry including spheromak and field reversed pinch. The ST and CT have potential advantages for ultimate fusion reactor; while at present they can also provide unique fusion science and technology contributions for mainstream fusion research. However, some critical scientific and technology issues should be extensively investigated.

  6. The science and technology case for a global network of compact, low cost ground-based laser heterodyne radiometers for column measurements of CO2 and CH4

    Science.gov (United States)

    Mao, J.; Clarke, G.; Wilson, E. L.; Palmer, P. I.; Feng, L.; Ramanathan, A. K.; Ott, L. E.; Duncan, B. N.; Melroy, H.; McLinden, M.; DiGregorio, A.

    2015-12-01

    The importance of atmospheric carbon dioxide (CO2) and methane (CH4) in determining Earth's climate is well established. Recent technological developments in space-borne instrumentation have enabled us to observe changes in these gases to a precision necessary to infer for the responsible geographical fluxes. The Total Carbon Column Observing Network (TCCON), comprising a network of upward-looking Fourier transform spectrometers, was established to provide an accurate ground truth and minimize regional systematic bias. NASA Goddard Space Flight Center (GSFC) has developed a compact, low-cost laser heterodyne radiometer (LHR) for global column measurements CO2 and CH4. This Mini-LHR is a passive instrument that uses sunlight as the primary light source to measure absorption of CO2 and CH4in the shortwave infrared near 1.6 microns. It uses compact telecommunications lasers to offer a low cost (RObotic NETwork (AERONET) which has more than 500 sites worldwide. In addition, the NASA Micro-Pulse Lidar Network (MPLNET) provides both column and vertically resolved aerosol and cloud data in active remote sensing at nearly 50 sites worldwide. Tandem operation with AERONET/MPLNET provides a clear pathway for the Mini-LHR to be expanded into a global monitoring network for carbon cycle science and satellite data validation, offering coverage in cloudy regions (e.g., Amazon basin) and key regions such as the Arctic where accelerated warming due to the release of CO2 and CH4from thawing tundra and permafrost is a concern. These vulnerable geographic regions are not well covered by current space-based CO2 and CH4 measurements. We will present an overview of our instrument development and the implementation of a network based on current and future resources. We will also present preliminary Observing System Simulation Experiments to demonstrate the effectiveness of a network Mini-LHR instruments in quantify regional CO2 fluxes, including an analysis of measurement sensitivity

  7. Tunable lasers for waste management photochemistry applications. [Dye lasers, excimer lasers, IR lasers

    Energy Technology Data Exchange (ETDEWEB)

    Finch, F.T. (comp.)

    1978-09-01

    A review of lasers with potential photochemical applications in waste management indicates that dye lasers, as a class, can provide tunable laser output through the visible and near-uv regions of the spectrum of most interest to photochemistry. Many variables can affect the performance of a specific dye laser, and the interactions of these variables, at the current state of the art, are complex. The recent literature on dye-laser characteristics has been reviewed and summarized, with emphasis on those parameters that most likely will affect the scaling of dye lasers in photochemical applications. Current costs are reviewed and correlated with output power. A new class of efficient uv lasers that appear to be scalable in both energy output and pulse rate, based on rare-gas halide excimers and similar molecules, is certain to find major applications in photochemistry. Because the most important developments are too recent to be adequately described in the literature or are the likely outcome of current experiments, the basic physics underlying the class of excimer lasers is described. Specific cost data are unavailable, but these new gas lasers should reflect costs similar to those of existing gas lasers, in particular, the pulsed CO/sub 2/ lasers. To complete the survey of tunable-laser characteristics, the technical characteristics of the various classes of lasers in the ir are summarized. Important developments in ir laser technology are being accelerated by isotope-separation research, but, initially at least, this portion of the spectrum is least likely to receive emphasis in waste-management-oriented photochemistry.

  8. Excimer laser ablation of thin titanium oxide films on glass

    Energy Technology Data Exchange (ETDEWEB)

    Overschelde, O. van [Condensed Matter Physics Group, University of Mons-Hainaut, B-7000 Mons (Belgium); Dinu, S. [University of ' Valahia' , Targoviste (Romania); Guisbiers, G. [Condensed Matter Physics Group, University of Mons-Hainaut, B-7000 Mons (Belgium); Monteverde, F. [Materia Nova, Unit of Electronic Microscopy, B-7000 Mons (Belgium); Nouvellon, C. [Materia Nova, Inorganic and Analytical Chemistry, B-7000 Mons (Belgium); Wautelet, M. [Condensed Matter Physics Group, University of Mons-Hainaut, B-7000 Mons (Belgium)]. E-mail: michel.wautelet@umh.ac.be

    2006-04-30

    Thin titanium dioxide films are deposited on glass substrates by magnetron sputter deposition. They are irradiated in air, by means of a KrF excimer laser. The ablation rate is measured as a function of the laser fluence per pulse, F, and of the number of pulses, N. Above a fluence threshold, the films are partially ablated. The ablated thickness does not vary linearly with N. This is the signature of a negative feedback between the film thickness and the ablation rate. The origin of this negative feedback is shown to be due to either thermal or electronic effects, or both. At high F, the film detachs from the substrate.

  9. Penetrating Keratoplasty for Keratoconus - Excimer Versus Femtosecond Laser Trephination.

    Science.gov (United States)

    Seitz, Berthold; Langenbucher, Achim; Hager, Tobias; Janunts, Edgar; El-Husseiny, Moatasem; Szentmáry, Nora

    2017-01-01

    In case of keratoconus, rigid gas-permeable contact lenses as the correction method of first choice allow for a good visual acuity for quite some time. In a severe stage of the disease with major cone-shaped protrusion of the cornea, even specially designed keratoconus contact lenses are no more tolerated. In case of existing contraindications for intrastromal ring segments, corneal transplantation typically has a very good prognosis. In case of advanced keratoconus - especially after corneal hydrops due to rupture of Descemet's membrane - penetrating keratoplasty (PKP) still is the surgical method of first choice. Noncontact excimer laser trephination seems to be especially beneficial for eyes with iatrogenic keratectasia after LASIK and those with repeat grafts in case of "keratoconus recurrences" due to small grafts with thin host cornea. For donor trephination from the epithelial side, an artificial chamber is used. Wound closure is achieved with a double running cross-stitch suture according to Hoffmann. Graft size is adapted individually depending on corneal size ("as large as possible - as small as necessary"). Limbal centration will be preferred intraoperatively due to optical displacement of the pupil. During the last 10 years femtosecond laser trephination has been introduced from the USA as a potentially advantageous approach. Prospective clinical studies have shown that the technique of non-contact excimer laser PKP improves donor and recipient centration, reduces "vertical tilt" and "horizontal torsion" of the graft in the recipient bed, thus resulting in significantly less "all-sutures-out" keratometric astigmatism (2.8 vs. 5.7 D), higher regularity of the topography (SRI 0.80 vs. 0.98) and better visual acuity (0.80 vs. 0.63) in contrast to the motor trephine. The stage of the disease does not influence functional outcome after excimer laser PKP. Refractive outcomes of femtosecond laser keratoplasty, however, resemble that of the motor trephine. In

  10. Penetrating Keratoplasty for Keratoconus – Excimer Versus Femtosecond Laser Trephination

    Science.gov (United States)

    Seitz, Berthold; Langenbucher, Achim; Hager, Tobias; Janunts, Edgar; El-Husseiny, Moatasem; Szentmáry, Nora

    2017-01-01

    Background: In case of keratoconus, rigid gas-permeable contact lenses as the correction method of first choice allow for a good visual acuity for quite some time. In a severe stage of the disease with major cone-shaped protrusion of the cornea, even specially designed keratoconus contact lenses are no more tolerated. In case of existing contraindications for intrastromal ring segments, corneal transplantation typically has a very good prognosis. Methods: In case of advanced keratoconus – especially after corneal hydrops due to rupture of Descemet’s membrane – penetrating keratoplasty (PKP) still is the surgical method of first choice. Noncontact excimer laser trephination seems to be especially beneficial for eyes with iatrogenic keratectasia after LASIK and those with repeat grafts in case of “keratoconus recurrences” due to small grafts with thin host cornea. For donor trephination from the epithelial side, an artificial chamber is used. Wound closure is achieved with a double running cross-stitch suture according to Hoffmann. Graft size is adapted individually depending on corneal size („as large as possible – as small as necessary“). Limbal centration will be preferred intraoperatively due to optical displacement of the pupil. During the last 10 years femtosecond laser trephination has been introduced from the USA as a potentially advantageous approach. Results: Prospective clinical studies have shown that the technique of non-contact excimer laser PKP improves donor and recipient centration, reduces “vertical tilt” and “horizontal torsion” of the graft in the recipient bed, thus resulting in significantly less “all-sutures-out” keratometric astigmatism (2.8 vs. 5.7 D), higher regularity of the topography (SRI 0.80 vs. 0.98) and better visual acuity (0.80 vs. 0.63) in contrast to the motor trephine. The stage of the disease does not influence functional outcome after excimer laser PKP. Refractive outcomes of femtosecond laser

  11. Xenon excimer emission from multicapillary discharges in direct current mode

    Science.gov (United States)

    Lee, Byung-Joon; Rahaman, Hasibur; Nam, Sang Hoon; Giapis, Konstantinos P.; Iberler, Marcus; Jacoby, Joachim; Frank, Klaus

    2011-08-01

    Microdischarges in xenon have been generated in a pressure range of 400-1013 mbar with a fixed flow rate of 100 sccm. These microdischarges are obtained from three metallic capillary tubes in series for excimer emission. Total discharge voltage is thrice as large as that of a single capillary discharge tube at current levels of up to 12 mA. Total spectral irradiance of vacuum ultraviolet (VUV) emission also increases significantly compared to that of the single capillary discharge. Further, the irradiance of the VUV emission is strongly dependent on pressure as well as the discharge current.

  12. Xenon excimer emission from multicapillary discharges in direct current mode

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Byung-Joon; Rahaman, Hasibur; Nam, Sang Hoon [Pohang Accelerator Laboratory, Pohang, Kyungbuk 790-784 (Korea, Republic of); Giapis, Konstantinos P. [Division of Chemistry and Chemical Engineering, California Institute of Technology, Pasadena, California 91125 (United States); Iberler, Marcus; Jacoby, Joachim [Institute of Applied Physics, Goethe University, Max-von-Laue-St. 1, 60438 Frankfurt am Main (Germany); Frank, Klaus [Physics Department I, F.A., University of Erlangen-Nuremberg, D-91058 Erlangen (Germany)

    2011-08-15

    Microdischarges in xenon have been generated in a pressure range of 400-1013 mbar with a fixed flow rate of 100 sccm. These microdischarges are obtained from three metallic capillary tubes in series for excimer emission. Total discharge voltage is thrice as large as that of a single capillary discharge tube at current levels of up to 12 mA. Total spectral irradiance of vacuum ultraviolet (VUV) emission also increases significantly compared to that of the single capillary discharge. Further, the irradiance of the VUV emission is strongly dependent on pressure as well as the discharge current.

  13. Nucleation, solvation and boiling of helium excimer clusters

    OpenAIRE

    Luna, Luis G. Mendoza; Siltagh, Nagham M.; Watkins, Mark J.; Bonifaci, Nelly; Aitken, Frederic; von Haeften, Klaus

    2015-01-01

    Helium excimers generated by a corona discharge were investigated in the gas and normal liquid phases of helium as a function of temperature and pressure between 3.8 and 5.0 K and 0.2 and 5.6 bar. Intense fluorescence in the visible region showed the rotationally resolved $d^3\\Sigma_u^+ \\rightarrow b^3\\Pi_g$ transition of He$_2^*$. With increasing pressure, the rotational lines merged into single features. The observed pressure dependence of linewidths, shapes and lineshifts established phase...

  14. Smartphone-enabled filterless fluorescence assay utilizing the pyrene excimer

    Science.gov (United States)

    Goertz, John P.; White, Ian M.

    2015-03-01

    Fluorescence microscopy offers a number of advantages for cell- and biomarker-based diagnostics with regards to ease of use and interpretation, sensitivity, and specificity. However, its use in low-resource settings is often hindered by the need for bulky microscopes with expensive excitation and filter setups. While many advances have been made towards utilizing smartphones as microscopes, there remains a reliance on complex attachments to facilitate fluorescence microscopy. Here, we report progress towards a filter-less fluorescent assay utilizing ultraviolet light, an unmodified smartphone, and pyrene-labeled aptamers. The pyrene monomer is excited at a wavelength of 350 nm and emits at approximately 390 nm; when two pyrene molecules are brought into close proximity, however, they form an excimer which emits at approximately 490 nm. We have engineered pyrene-conjugated DNA sequences such that the fluorophores, normally in monomeric configuration, are brought into proximity upon binding of the DNA to its target. The large Stokes shift between excitation and emission of the excimer allows us to detect such biorecognition events with an unfiltered smartphone camera, enabling the use of this assay in low-resource settings where portability and easeof- use are paramount.

  15. Wound healing after excimer laser keratomileusis (photorefractive keratectomy) in monkeys.

    Science.gov (United States)

    Fantes, F E; Hanna, K D; Waring, G O; Pouliquen, Y; Thompson, K P; Savoldelli, M

    1990-05-01

    Laser myopic keratomileusis (photorefractive keratectomy) was performed on 29 rhesus monkey corneas with an argon fluoride (193-nm) excimer laser and a computer-controlled, moving slit delivery system. The 4-mm-diameter central ablation zone ranged in depth from 11 microns (-2 diopters effect) to 46 microns (-8 diopters effect). Corneas were studied for the 9 months postoperatively by clinical slit-lamp microscopy, and periodically with light and transmission electron microscopy. By 6 weeks, mild to moderate subepithelial haze was apparent in 93% of the corneas, with considerable variability in density. Progressive clearing occurred so that by 6 to 9 months 12 of 13 surviving corneas (92%) were either completely clear (4 corneas) or trace hazy (8 corneas). The epithelium was thickened at 21 days after ablation and returned to normal thickness by 3 months. At 3 weeks, subepithelial fibroblasts were three times the density of normal keratocytes and returned to nearly normal numbers by 9 months. We concluded that the anterior monkey cornea demonstrated a mild, typical wound healing response after excimer laser keratomileusis.

  16. [The excimer laser in dermatology and esthetic medicine].

    Science.gov (United States)

    Grema, H; Raulin, C

    2004-01-01

    First reports about the use of the excimer laser in dermatology date back to 1997. It is seen as an improvement on conventional phototherapy and photochemotherapy because of the lower cumulative UV-dose involved, the shorter time frame required for treatment and the option of targeting individual lesions without affecting the surrounding healthy skin. In addition to the indications of psoriasis vulgaris, vitiligo and atopic eczema (for which there is now FDA approval in the US), the spectrum of possible uses for the excimer laser is growing rapidly, especially in the field of light-sensitive dermatoses. Case studies so far have ranged from post-operative hypopigmentation to acne vulgaris and from alopecia areata to parapsoriasis en plaque. The foremost priorities in the future will be to evaluate reproducible therapeutic regimens with realistic prospects of success in large-scale studies; assess potential iatrogenic risks in treatment; develop pathogenetic models for the mechanism of action; and define therapeutic approaches to new indications. This paper summarizes the publications to date and discusses our observations and experiences.

  17. Excimer laser annealing to fabricate low cost solar cells

    Science.gov (United States)

    1984-01-01

    The objective is to show whether or not pulsed excimer laser annealing (PELA) of ion-implanted junctions is a cost effective replacement for diffused junctions in fabricating crystalline silicon solar cells. The preliminary economic analysis completed shows that the use of PELA to fabricate both the front junction and back surface field (BSF) would cost approximately 35 cents per peak watt (Wp), compared to a cost of 15 cents/Wp for diffusion, aluminum BSF and an extra cleaning step in the baseline process. The cost advantage of the PELA process depends on improving the average cell efficiency from 14% to 16%, which would lower the overall cost of the module by about 15 cents/Wp. An optimized PELA process compatible with commercial production is to be developed, and increased cell efficiency with sufficient product for adequate statistical analysis demonstrated. An excimer laser annealing station was set-up and made operational. The first experiment used 248 nm radiation to anneal phosphorus implants in polished and texture-etched silicon.

  18. Spectrocolorimetric Control of Ancient Documents Postablation with Excimer Lasers

    Science.gov (United States)

    Soares, Olivério D. D.; Miranda, Rosa M.; Costa, José L. C.

    1999-10-01

    The application of excimer lasers in ablation, cleaning, and restoration for the recovery of paper and parchment manuscripts is a recently implemented technique. A report of the use of excimer lasers in a cleaning process by which mud was removed from Islamic papers and parchments is presented. It was found that, because of the close proximity of the binding energies of paper to paper and of paper to mud, it was difficult to maintain control of the ablation process. However, the substrate was not affected. Spectrocolorimetry was used as a technique to detect the effects of ablation on cleaned areas of the manuscripts in terms of change in color appearance and severity of aging postablation. The analysis was performed by comparison of treated and untreated areas. Mathematical modeling was developed to define a representative original color and a color-distribution parameter. Improvements in the measuring method were made to yield the required precision for evaluating differences in color produced by laser ablation and to follow the color evolution after ablation. Results show that the effects of restoration, aging, and the environmental conditions can be individually identified under certain conditions. The method has applications in other domains.

  19. Excimer laser cleaning of mud stained paper and parchment

    Directory of Open Access Journals (Sweden)

    Duarte, J. P.

    1998-04-01

    Full Text Available The main advantage of excimer lasers when processing materials, its the emission of a radiation with wavelength in the ultraviolet region. This characteristic allows an extremely accurate and very well defined shape of material removal as well as total absence of heat affected zone and alterations in the material structure. In excimer laser paper and parchment cleaning, the mud is removed by breaking the physicalchemical bonding between this last one and the material to be cleaned not affecting neither its structure nor the chromatic pigment existing in some samples.

    A principal vantagem dos lasers de excímeros, no processamento de materiais, é a emissão de um feixe luminoso com comprimento de onda compreendido na região do ultravioleta, permitindo urna remoçao do material com precisão muito elevada e excelente definição de bordos, ausência de zona térmicamente afectada e ausência de alterações da estrutura. Na limpeza dos papéis e pergaminhos a lama é removida por quebra das ligações fisico-químicas entre a lama e o papel não se afectando a estrutura deste, assim como não se afectaram os pigmentos cromáticos existentes em algumas amostras.

  20. A repetitively pulsed xenon chloride excimer laser with all ferrite magnetic cores (AFMC) based all solid state exciter

    Science.gov (United States)

    Benerji, N. S.; Varshnay, N. K.; Ghodke, D. V.; Singh, A.

    2016-10-01

    Performance of repetitively pulsed xenon chloride excimer laser (λ~308 nm) with solid state pulser consisting of magnetic pulse compression circuit (MPC) using all ferrite magnetic cores (AFMC) is reported. Laser system suitable for 100 Hz operation with inbuilt pre-ionizer, compact gas circulation and cooling has been developed and presented. In this configuration, high voltage pulses of ~8 μs duration are compressed to ~100 ns by magnetic pulse compression circuit with overall compression factor of ~80. Pulse energy of ~18 J stored in the primary capacitor is transferred to the laser head with an efficiency of ~85% compared to ~70% that is normally achieved in such configurations using annealed met-glass core. This is a significant improvement of about 21%. Maximum output laser pulse energy of ~100 mJ was achieved at repetition rate of 100 Hz with a typical pulse to pulse energy stability of ±5% and laser pulse energy of 150 mJ was generated at low rep-rate of ~40 Hz. This exciter uses a low current and low voltage solid state switch (SCR) that replaces high voltage and high current switch i. e, thyratron completely. The use of solid state exciter in turn reduces electromagnetic interference (EMI) effects particularly in excimer lasers where high EMI is present due to high di/dt. The laser is focused on a thin copper sheet for generation of micro-hole and the SEM image of the generated micro hole shows the energy stability of the laser at high repetition rate operation. Nearly homogeneous, regular and well developed xenon chloride (XeCl) laser beam spot was achieved using the laser.

  1. Laser Applications and Other Topics in Quantum Electronics: Coaxial HgI excimer lamps

    Science.gov (United States)

    Malinin, A. N.; Polyak, A. V.; Guivan, N. N.; Zubrilin, N. G.; Shimon, Lyudvik L.

    2002-02-01

    The emission of coaxial HgI excimer lamps pumped by a repetitively pulsed barrier discharge is experimentally studied. The stable operation of the excimer lamps was demonstrated at pump-pulse repetition rates from 0.5 to 12 kHz, and the average emission power attained of 0.6 W at 444 nm. It was found that upon an addition of 0.8% of xenon to the mixture of helium and mercury diiodide, the pulse and average emission powers increased by 30%. The emission power reduced by 5% after 2.5 × 106 pulses. An interpretation of the results of optimising the excimer lamp characteristics is given.

  2. The theoretical development of the cascade model excimer laser irradiation on the organ of vision

    Directory of Open Access Journals (Sweden)

    V. N. Trubilin

    2012-01-01

    Full Text Available Authors analyzed the baseline (Pershin K. B., 2000 and advanced (trubilin V. N Pozharitskii M. D., 2011 theoretical model of the cascade excimer laser effects on eyesight.the analysis indicates a lack of elaboration of issues related to the cascade of «a priori measures» aimed at medical and psycho- logical prediction «quality of life» and post-operative rehabilitation. In theory, authors suggest further improvement of the cascade model of excimer laser irradiation on the organ of vision. the proposed theoretical concepts will provide a practical matter, improvefunctional and subjective results of the excimer laser correction of refractive errors.

  3. Compaction Behavior of Isomalt after Roll Compaction

    OpenAIRE

    2012-01-01

    The suitability of the new isomalt grade galenIQ™ 801 for dry granulation and following tableting is evaluated in this study. Isomalt alone, as well as a blend of equal parts with dibasic calcium phosphate, is roll compacted and tableted. Particle size distribution and flowability of the granules and friability and disintegration time of the tablets are determined. Tensile strength of tablets is related to the specific compaction force during roll compaction and the tableting force....

  4. CAD/CAM interface design of excimer laser micro-processing system

    Science.gov (United States)

    Jing, Liang; Chen, Tao; Zuo, Tiechuan

    2005-12-01

    Recently CAD/CAM technology has been gradually used in the field of laser processing. The excimer laser micro-processing system just identified G instruction before CAD/CAM interface was designed. However the course of designing a part with G instruction for users is too hard. The efficiency is low and probability of making errors is high. By secondary development technology of AutoCAD with Visual Basic, an application was developed to pick-up each entity's information in graph and convert them to each entity's processing parameters. Also an additional function was added into former controlling software to identify these processing parameters of each entity and realize continue processing of graphic. Based on the above CAD/CAM interface, Users can design a part in AutoCAD instead of using G instruction. The period of designing a part is sharply shortened. This new way of design greatly guarantees the processing parameters of the part is right and exclusive. The processing of complex novel bio-chip has been realized by this new function.

  5. Surface Modification of Ceramic Materials Using Excimer Laser

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Changes of surface morphology following XeCl excimer laser irradiation were investigated for three engineering ceramic materials (Al2O3, Al2O3-SiC nanocomposite and Si3N4). Al2O3 and Al2O3-SiC nanocomposite samples exhibit a smooth rapid melt layer on the surface, and the formation of the metastable γ-Al2O3 was observed. A silicon-rich layer on the surface was formed after laser irradiation of Si3N4. The toughness K1c of the materials was measured by the indentation fracture method. After laser irradiation, the toughness of Al2O3, Al2O3-SiC nanocomposite and Si3N4 was improved to various degrees: Al2O3-SiC nanocomposite, 60% (max.); Al2O3, 40% (max.); Si3N4, 12% (max.).

  6. Applications of the 308-nm excimer laser in dermatology

    Science.gov (United States)

    Farkas, A.; Kemeny, L.

    2006-05-01

    Excimer lasers contain a mixture of a noble inert gas and a halogen, which form excited dimers only in the activated state. High-energy current is used to produce these dimers, which have a very short lifetime, and after their fast dissociation they release the excitation energy through ultraviolet photons. The application of these lasers proved to be successful in medicine, including the field of ophthalmology, cardiology, angiology, dentistry, orthopaedics, and, in recent years, dermatology. For medical purposes, the 193-nm argon fluoride, the 248-nm krypton fluoride, the 351-nm xenon fluoride, and the 308-nm xenon chloride lasers are used. Recently, the 308-nm xenon chloride laser has gained much attention as a very effective treatment modality in dermatological disorders. It was successfully utilized in psoriasis; later, it proved to be useful in handling other lightsensitive skin disorders and even in the treatment of allergic rhinitis. This review summarizes the possible applications of this promising tool in dermatology.

  7. Qualification of diode foil materials for excimer lasers

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, R.G.; Shurter, R.P.; Rose, E.A.

    1989-01-01

    The Aurora facility at Los Alamos National Laboratory uses KrF excimer lasers to produce 248 nm light for inertial confinement fusion applications. Diodes in each amplifier produce relativistic electron beams to pump a Kr-F-Ar gas mixture. A foil is necessary to separate the vacuum diode from the laser gas. High tensile strength, high electron transmission, low ultraviolet reflectivity, and chemical compatibility with fluorine have been identified as requisite foil properties. Several different materials were acquired and tested for use as diode foils. Transmission and fluorine compatibility tests were performed using the Electron Gun Test Facility (EGTF) at Los Alamos. Off-line tests of tensile strength and reflectivity were performed. Titanium foil, which is commonly used as a diode foil, was found to generate solid and gaseous fluoride compounds, some of which are highly reactive in contact with water vapor. 6 refs., 6 figs., 1 tab.

  8. Qualification of diode foil materials for excimer lasers

    Science.gov (United States)

    Anderson, R. G.; Shurter, R. P.; Rose, E. A.

    The Aurora facility at Los Alamos National Laboratory uses KrF excimer lasers to produce 248 nm light for inertial confinement fusion applications. Diodes in each amplifier produce relativistic electron beams to pump a Kr-F-Ar gas mixture. A foil is necessary to separate the vacuum diode from the laser gas. High tensile strength, high electron transmission, low ultraviolet reflectivity, and chemical compatibility with fluorine have been identified as requisite foil properties. Several different materials were acquired and tested for use as diode foils. Transmission and fluorine compatibility tests were performed using the Electron Gun Test Facility (EGTF) at Los Alamos. Off-line tests of tensile strength and reflectivity were performed. Titanium foil, which is commonly used as a diode foil, was found to generate solid and gaseous fluoride compounds, some of which are highly reactive in contact with water vapor.

  9. Phosphorus diffusion in germanium following implantation and excimer laser annealing

    Science.gov (United States)

    Wang, Chen; Li, Cheng; Huang, Shihao; Lu, Weifang; Yan, Guangming; Zhang, Maotian; Wu, Huanda; Lin, Guangyang; Wei, Jiangbin; Huang, Wei; Lai, Hongkai; Chen, Songyan

    2014-05-01

    We focus our study on phosphorus diffusion in ion-implanted germanium after excimer laser annealing (ELA). An analytical model of laser annealing process is developed to predict the temperature profile and the melted depth in Ge. Based on the heat calculation of ELA, a phosphorus diffusion model has been proposed to predict the dopant profiles in Ge after ELA and fit SIMS profiles perfectly. A comparison between the current-voltage characteristics of Ge n+/p junctions formed by ELA at 250 mJ/cm2 and rapid thermal annealing at 650 °C for 15 s has been made, suggesting that ELA is promising for high performance Ge n+/p junctions.

  10. Investigations of Buffer-Gases Role in Xenon and Halogen Excimer Mixtures

    Science.gov (United States)

    Ciobotaru, L. C.; Porosnicu, C.

    2010-10-01

    Excimer- is an acronym in use for the excited dimmer, molecule which does not exist in the ground state but only in an excited state. This paper presents the role of the buffer-gas atoms (Ar, Ne, He), in the (Cl2/I2 Xe) excimer radiation emission mechanisms. The same buffer-gas produced a different effect on the excimer emission intensity: the neon and argon addition to xenon/chlorine/iodine had a negative effect while the helium and neon addition had a positive effect. The Penning reactions play an important role in the excimer radiation generation in connection with the gas-buffer addition and the halogen ionization potential value. The measurements are performed using a dielectric barrier discharge (DBD) at moderate pressure in a panel, respectively classic coaxial geometry.

  11. Vacuum Ultraviolet Xenon Excimer Light Source Excited by a Pulsed Jet Discharge

    National Research Council Canada - National Science Library

    Eiji FUTAGAMI; Toshiaki TAKADA; Junji KAWANAKA; Shoichi KUBODERA; Wataru SASAKI; Kou KUROSAWA; Kenichi MITSUHASHI; Tatsushi IGARASHI

    1995-01-01

      We have developed a new xenon excimer light source in vacuum ultraviolet (VUV). The use of a pulsed gas jet discharge realized efficient cluster excitation and spatially localized emission in VUV with an extremely long pulse duration...

  12. Nickel-disilicide-assisted excimer laser crystallization of amorphous silicon

    Institute of Scientific and Technical Information of China (English)

    Liao Yan-Ping; Shao Xi-Bin; Gao Feng-Li; Luo Wen-Sheng; Wu Yuan; Fu Guo-Zhu; Jing Hai; Ma Kai

    2006-01-01

    Polycrystalline silicon (poly-Si) thin film has been prepared by means of nickel-disilicide (NiSi2) assisted excimer laser crystallization (ELC). The process to prepare a sample includes two steps. One step consists of the formation of NiSi2 precipitates by heat-treating the dehydrogenated amorphous silicon (a-Si) coated with a thin layer of Ni. And the other step consists of the formation of poly-Si grains by means of ELC. According to the test results of scanning electron microscopy (SEM), another grain growth model named two-interface grain growth has been proposed to contrast with the conventional Ni-metal-induced lateral crystallization (Ni-MILC) model and the ELC model. That is, an additional grain growth interface other than that in conventional ELC is formed, which consists of NiSi2 precipitates and a-Si.The processes for grain growth according to various excimer laser energy densities delivered to the a-Si film have been discussed. It is discovered that grains with needle shape and most of a uniform orientation are formed which grow up with NiSi2 precipitates as seeds. The reason for the formation of such grains which are different from that of Ni-MILCwithout migration of Ni atoms is not clear. Our model and analysis point out a method to prepare grains with needle shape and mostly of a uniform orientation. If such grains are utilized to make thin-film transistor, its characteristics may be improved.

  13. Influence of gas discharge parameters on emissions from a dielectric barrier discharge excited argon excimer lamp

    OpenAIRE

    2011-01-01

    A dielectric barrier discharge excited neutral argon (Ar I) excimer lamp has been developed and characterised. The aim of this study was to develop an excimer lamp operating at atmospheric pressure that can replace mercury lamps and vacuum equipment used in the sterilisation of medical equipment and in the food industry. The effects of discharge gas pressure, flow rate, excitation frequency and pulse width on the intensity of the Ar I vacuum ultraviolet (VUV) emission at 126 nm and near infra...

  14. Formation and control of excimer of a coumarin derivative in Langmuir–Blodgett films

    Energy Technology Data Exchange (ETDEWEB)

    Chakraborty, Santanu; Bhattacharjee, D.; Hussain, Syed Arshad, E-mail: sa_h153@hotmail.com

    2014-01-15

    In this communication we report the formation and control of excimer of a coumerin derivative 7-Hydroxy-N-Octadecyl Coumarin-3-Carboxamide (7HNO3C) assembled onto Langmuir–Blodgett (LB) films. Surface pressure–area per molecule isotherm revealed that 7HNO3C formed stable Langmuir monolayer at the air–water interface. Spectroscoipic characterizations confirmed the formation of excimer of 7HNO3C in the LB film prepared at 20 mN/m surface pressure. The excimer band remains present even when 7HNO3C molecules are diluted with a long chain fatty acid stearic acid in LB films. The excimer formation of 7HNO3C can be controlled by incorporating clay particle laponite in the LB film. The excimer band is totally absent in the hybrid 7HNO3C–laponite LB films. In-situ fluorescence imaging microscopy and atomic force microscopy confirmed the incorporation of clay laponite onto LB films. -- Highlights: • Formation of Langmuir monolayer and Langmuir–Blodgett (LB) film of a coumarin derivative. • Presence of excimeric species in the LB film lifted at 20 mN/m surface pressure is confirmed from the spectroscopic studies. • Control of excimer formation by incorporating clay particle laponite on to the LB film. • In-situ fluorescence imaging microscopy and atomic force microscopy confirmed the incorporation of clay laponite onto LB films.

  15. Aggregation-controlled excimer emission from anthracene-containing polyamidoamine dendrimers.

    Science.gov (United States)

    Lekha, P K; Prasad, Edamana

    2010-03-22

    Lower generations of polyamidoamine (PAMAM) dendrimers were peripherally modified with anthracene moieties, and excimer emission from anthracene chromophores was investigated in an acetonitrile-water mixture at acidic and basic pH values. Results from fluorescence spectroscopic experiments suggest that 1) the propensity of anthracene-modified PAMAM dendrimers to aggregate in acetonitrile is substantial in the presence of 15-20 vol % of water, and 2) aggregate formation in anthracene-modified PAMAM dendrimers leads to unique morphologies in the ground state, where the anthracene units are pre-arranged to form stable excimers upon photoexcitation. Three types of anthracene excimers are generated in the system, with face-to-face, angular, and T-shaped geometry. The formation of different types of anthracene excimers was confirmed by steady-state and time-resolved fluorescence spectroscopic experiments. Experimental results further suggest that it is feasible to alter the type of excimer formed by anthracene units attached to the PAMAM dendrimers through altering the propensity for ground-state aggregation. Most excitingly, increased pi conjugation in the molecular framework of anthracene-substituted PAMAM dendrimers leads to intense and exclusive excimer emission from anthracene at room temperature.

  16. Monitoring excimer formation of perylene dye molecules within PMMA-based nanofiber via FLIM method

    Science.gov (United States)

    Inci, Mehmet Naci; Acikgoz, Sabriye; Demir, Mustafa Muamer

    2016-04-01

    Confocal fluorescence lifetime imaging microscopy method is used to obtain individual fluorescence intensity and lifetime values of aromatic Perylene dye molecules encapsulated into PMMA based nanofibers. Fluorescence spectrum of aromatic hydrocarbon dye molecules, like perylene, depends on the concentration of dye molecules and these dye molecules display an excimeric emission band besides monomeric emission bands. Due to the dimension of a nanofiber is comparable to the monomer emission wavelength, the presence of nanofibers does not become effective on the decay rates of a single perylene molecule and its lifetime remains unchanged. When the concentration of perylene increases, molecular motion of the perylene molecule is restricted within nanofibers so that excimer emission arises from the partially overlapped conformation. As compared to free excimer emission of perylene, time-resolved experiments show that the fluorescence lifetime of excimer emission of perylene, which is encapsulated into NFs, gets shortened dramatically. Such a decrease in the lifetime is measured to be almost 50 percent, which indicates that the excimer emission of perylene molecules is more sensitive to change in the surrounding environment due to its longer wavelength. Fluorescence lifetime measurements are typically used to confirm the presence of excimers and to construct an excimer formation map of these dye molecules.

  17. Studies in fiber guided excimer laser surgery for cutting and drilling bone and meniscus.

    Science.gov (United States)

    Dressel, M; Jahn, R; Neu, W; Jungbluth, K H

    1991-01-01

    Our experiments on transmitting high-power excimer laser pulses through optical fibers and our investigations on excimer laser ablation of hard tissue show the feasibility of using the excimer laser as an additional instrument in general and accident surgery involving minimal invasive surgery. By combining XeCl-excimer lasers and tapered fused silica fibers we obtained output fluences up to 32 J/cm2 and ablation rates of 3 microns/pulse of hard tissue. This enables us to cut bone and cartilage in a period of time which is suitable for clinical operations. Various experiments were carried out on cadavers in order to optimize the parameters of the excimer laser and fibers: e.g., wavelength, pulse duration, energy, repetition rate, fiber core diameter. The surfaces of the cut tissue are comparable to cuts with conventional instruments. No carbonisation was observed. The temperature increase is below 40 degrees C in the tissue surrounding the laser spot. The healing rate of an excimer laser cut is not slower than mechanical treatments; the quality is comparable.

  18. CLINICAL ANALYSIS OF EXCIMER LASER PHOTOREFRACTIVE KERATECTOMY FOR TREATMENT OF MYOPIA AND MYOPIC ASTIGMATISM

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    To evaluate the efficacy and accuracy of photorefractive keratectomy (PRK) for myopia and myopic astigmatism .SVS APEX excimer laser with a wave length of 193 nm(Sumit Technology Inc. Waltham, Mass, USA) was applied. 316 myopic eyes of 168 patients were treated with PRK between September, 1996 and October, 1997, and 260 eyes (84%) of 150 patients were followed for more than three months, including male 68(116 eyes, 40.1%) and female 82(144 eyes, 59.9%). The preoperative spherical equivalent refractive errors ranged from -1.25D to -10.00 (mean -4.67±1.63D), and astigmatism ranged from 0 to -2.00D (means -0.33±0.45D). We divided the patients into two groups according to the referaction: group A (from -1.25D to -5.90D) and group B(from -6.00 to -10.00D). The number of eyes in the two groups were 220 and 40 respectively. In group A, on the 10th day, 68.9% has the uncorrected visual acuity (UCVA) equal to or one line better or lower than the preoperative best corrected visual acuity (BCVA). In 1,3,6 and 12 months, 90%, 96%, 95% and 94% had the UCVA equal to or one line better or lower than the preoperative BCVA respectively. In group B, on the 10 th day, in 1,3,6 and 12 months, UCVA equal to or one line better or lower than the preoperative BCVA occurred in 35.9%, 83%, 87%, 86%, and 84% of the cases respectively. Most of the haze showed 0.5~1 grades except 3 eyes with the haze of 2 grade in 3 or 6 months and it changed to 1 and 0.5 grade respectively within one year. In 10 days and 1,3,6,12 months postoperatively, the corneal haze was noted in 32.9%, 84.8%, 62.8%,9.0% and 2.8% of the treated eyes respectively. We found that 193 nm excimer laser PRK was a predictable, safe, stable, and effective refractive surgery for correcting myopia up to -10.00D in Chinese patients, and the effect was better in myopia lower than -6.00D.

  19. Dynamic compaction of boron carbide by a shock wave

    Science.gov (United States)

    Buzyurkin, Andrey E.; Kraus, Eugeny I.; Lukyanov, Yaroslav L.

    2016-10-01

    This paper presents experiments on explosive compaction of boron carbide powder and modeling of the stress state behind the shock front at shock loading. The aim of this study was to obtain a durable low-porosity compact sample. The explosive compaction technology is used in this problem because the boron carbide is an extremely hard and refractory material. Therefore, its compaction by traditional methods requires special equipment and considerable expenses.

  20. COMPACT PROTON INJECTOR AND FIRST ACCELERATOR SYSTEM TEST FOR COMPACT PROTON DIELECTRIC WALL CANCER THERAPY ACCELERATOR

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Y; Guethlein, G; Caporaso, G; Sampayan, S; Blackfield, D; Cook, E; Falabella, S; Harris, J; Hawkins, S; Nelson, S; Poole, B; Richardson, R; Watson, J; Weir, J; Pearson, D

    2009-04-23

    A compact proton accelerator for cancer treatment is being developed by using the high-gradient dielectric insulator wall (DWA) technology [1-4]. We are testing all the essential DWA components, including a compact proton source, on the First Article System Test (FAST). The configuration and progress on the injector and FAST will be presented.

  1. One-dimensional modelling of DBDs in Ne-Xe mixtures for excimer lamps

    Science.gov (United States)

    Belasri, A.; Khodja, K.; Bendella, S.; Harrache, Z.

    2010-11-01

    Dielectric barrier discharges (DBDs) are a promising technology for high-intensity sources of specific ultraviolet (UV) and vacuum ultraviolet (VUV) radiation. In this work, the microdischarge dynamics in DBDs for Ne-Xe mixtures under the close conditions of excimer lamp working has been investigated. The computer model including the cathode fall, the positive column and the dielectric is composed of two coupled sub-models. The first submodel describes the electrical properties of the discharge and is based on a fluid, two-moments description of electron and ion transport coupled with Poisson's equation during the discharge pulse. The second submodel, based on three main modules: a plasma chemistry module, a circuit module and a Boltzmann equation module, with source terms deduced from the electric model, describes the time variations of charged and excited species concentrations and the UV photon emission. The use of the present description allows a good resolution near the sheath at high pressure and it predicts correctly the waveform of the discharge behaviour. The effects of operation voltage, dielectric capacitance, gas mixture composition, gas pressure, as well as the secondary electron emission by ion at the cathode on the discharge characteristics and the 173 nm photon generation have been investigated and discussed.

  2. Analysis and Compact Modeling of a Vertical Grounded-Base NPN Bipolar Transistor used as ESD Protection in a Smart Power Technology

    OpenAIRE

    Bertrand, Géraldine; Delage, Christelle; Bafleur, Marise; Nolhier, Nicolas; Dorkel, Jean-Marie; Nguyen, Quang; Mauran, Nicolas; Trémouilles, David; Perdu, Philippe

    2001-01-01

    9 pages; International audience; A thorough analysis of the physical mechanisms involved in a Vertical Grounded-Base NPN bipolar transistor (VGBNPN) under ElectroStatic Discharge (ESD) stress is first carried out by using 2D-device simulation, Transmission Line Pulse measurement (TLP) and photoemission experiments. This analysis is used to account for the unexpected low value of the VGBNPN snapback holding voltage under TLP stress. A compact model based on a new avalanche formulation resultin...

  3. On Compact Graphs

    Institute of Scientific and Technical Information of China (English)

    Ping WANG; Jiong Sheng LI

    2005-01-01

    Let G be a finite simple graph with adjacency matrix A, and let P(A) be the convex closure of the set of all permutation matrices commuting with A. G is said to be compact if every doubly stochastic matrix which commutes with A is in P(A). In this paper, we characterize 3-regular compact graphs and prove that if G is a connected regular compact graph, G - v is also compact, and give a family of almost regular compact connected graphs.

  4. Compactness in Metric Spaces

    Directory of Open Access Journals (Sweden)

    Nakasho Kazuhisa

    2016-09-01

    Full Text Available In this article, we mainly formalize in Mizar [2] the equivalence among a few compactness definitions of metric spaces, norm spaces, and the real line. In the first section, we formalized general topological properties of metric spaces. We discussed openness and closedness of subsets in metric spaces in terms of convergence of element sequences. In the second section, we firstly formalize the definition of sequentially compact, and then discuss the equivalence of compactness, countable compactness, sequential compactness, and totally boundedness with completeness in metric spaces.

  5. An excimer-based FAIMS detector for detection of ultra-low concentration of explosives

    Science.gov (United States)

    Chistyakov, Alexander A.; Kotkovskii, Gennadii E.; Sychev, Alexey V.; Perederiy, Anatoly N.; Budovich, V. L.; Budovich, D. V.

    2014-05-01

    A new method of explosives detection based on the field asymmetric ion mobility spectrometry (FAIMS) and ionization by an excimer emitter has been developed jointly with a portable detector. The excimer emitter differs from usual UVionizing lamps by mechanism of emitting, energy and spectral characteristics. The developed and applied Ar2-excimer emitter has the working volume of 1 cm3, consuming power 0.6 W, the energy of photons of about 10 eV (λ=126 nm), the FWHM radiation spectrum of 10 nm and emits more than 1016 photon per second that is two orders of magnitude higher than UV-lamp of the same working volume emits. This also exceeds by an order of magnitude the quantity of photons per second for 10-Hz solid state YAG:Nd3+ - laser of 1mJ pulse energy at λ=266 nm that is also used to ionize the analyte. The Ar2-excimer ionizes explosives by direct ionization mechanism and through ionization of organic impurities. The developed Ar2-excimer-based ion source does not require cooling due to low level discharge current of emitter and is able to work with no repair more than 10000 hrs. The developed excimer-based explosives detector can analyze both vapors and traces of explosives. The FAIMS spectra of the basic types of explosives like trinitrotoluene (TNT), cyclotrimethylenetrinitramine (RDX), dinitrotoluene (DNT), cyclotetramethylenetetranitramine (HMX), nitroglycerine (NG), pentaerythritol tetranitrate (PETN) under Ar2-excimer ionization are presented. The detection limit determined for TNT vapors equals 1x10-14 g/cm3, for TNT traces- 100 pg.

  6. Excimer laser for the treatment of psoriasis: safety, efficacy, and patient acceptability

    Directory of Open Access Journals (Sweden)

    Abrouk M

    2016-12-01

    Full Text Available Michael Abrouk,1 Ethan Levin,2 Merrick Brodsky,1 Jessica R Gandy,1 Mio Nakamura,2 Tian Hao Zhu,3 Benjamin Farahnik,4 John Koo,2 Tina Bhutani2 1Irvine School of Medicine, Irvine, 2Department of Dermatology, Psoriasis and Skin Treatment Center, University of California, San Francisco, 3Department of Dermatology, University of Southern California Keck School of Medicine, Los Angeles, CA, 4Department of Dermatology, University of Vermont College of Medicine, Burlington, VT, USA Introduction: The 308 nm excimer laser is a widely used device throughout the field of dermatology for many diseases including psoriasis. Although the laser has demonstrated clinical efficacy, there is a lack of literature outlining the safety, efficacy, and patient acceptability of the excimer laser. Methods: A literature search on PubMed was used with combinations of the terms “excimer”, “excimer laser”, “308 nm”, “psoriasis”, “protocol”, “safety”, “efficacy”, acceptability”, “side effects”, and “dose”. The search results were included if they contained information pertaining to excimer laser and psoriasis treatment and description of the safety, efficacy, and patient acceptability of the treatment. Results: The 308 nm excimer laser is generally safe and well tolerated with minimal side effects including erythema, blistering, and pigmentary changes. It has a range of efficacies depending on the protocol used with several different treatment protocols, including the induration protocol, the minimal erythema dose protocol, and the newer minimal blistering dose protocol. Conclusion: Although the excimer laser is not a first-line treatment, it remains an excellent treatment option for psoriasis patients and has been demonstrated to be an effective treatment with little to no side effects. Keywords: excimer, laser, 308 nm, psoriasis, safety, efficacy

  7. Excimer laser crystallization of amorphous silicon on metallic substrate

    Science.gov (United States)

    Delachat, F.; Antoni, F.; Slaoui, A.; Cayron, C.; Ducros, C.; Lerat, J.-F.; Emeraud, T.; Negru, R.; Huet, K.; Reydet, P.-L.

    2013-06-01

    An attempt has been made to achieve the crystallization of silicon thin film on metallic foils by long pulse duration excimer laser processing. Amorphous silicon thin films (100 nm) were deposited by radiofrequency magnetron sputtering on a commercial metallic alloy (N42-FeNi made of 41 % of Ni) coated by a tantalum nitride (TaN) layer. The TaN coating acts as a barrier layer, preventing the diffusion of metallic impurities in the silicon thin film during the laser annealing. An energy density threshold of 0.3 J cm-2, necessary for surface melting and crystallization of the amorphous silicon, was predicted by a numerical simulation of laser-induced phase transitions and witnessed by Raman analysis. Beyond this fluence, the melt depth increases with the intensification of energy density. A complete crystallization of the layer is achieved for an energy density of 0.9 J cm-2. Scanning electron microscopy unveils the nanostructuring of the silicon after laser irradiation, while cross-sectional transmission electron microscopy reveals the crystallites' columnar growth.

  8. Photochemical surface modification of PET by excimer UV lamp irradiation

    Science.gov (United States)

    Gao, S. L.; Häßler, R.; Mäder, E.; Bahners, T.; Opwis, K.; Schollmeyer, E.

    2005-09-01

    UV irradiation has interesting potential for the photochemical modification of polymers. In order to study cross-linking effects and/or thin-layer deposition following a treatment in the presence of bi-functional media or in inert atmosphere, irradiation of PET in various atmospheres was performed using a KrCl excimer lamp. Surface properties were investigated by atomic force microscopy, nanoindentation, micro-thermal analysis, and X-ray photo-electron spectroscopy. The studies reveal that surface chemical composition, morphology, adhesion, thermomechanics, and stiffness/modulus are strongly affected by UV irradiation in the presence of bi-functional media. Films treated in octadiene and argon show an increase of surface modulus, much less expansion, and lower soft/melt temperatures, which is an indication of the surface cross-linking effect and a decrease of crystallinity within the near-surface layer. In the case of a diallylphthalate-treated film, depending on the local structure, either a strong decrease of melting temperature or no melting point is found, which is attributed to the irregular cross linking and thickness of the modified layer associated with a decrease of surface modulus. A significant increase of the alkali resistance is found after irradiation, as a result of both wetting and cross-linking effects on the polymer surface.

  9. Technique for cellular microsurgery using the 193-nm excimer laser.

    Science.gov (United States)

    Palanker, D; Ohad, S; Lewis, A; Simon, A; Shenkar, J; Penchas, S; Laufer, N

    1991-01-01

    A new cell surgery technique has been developed to produce well-defined alterations in cells and tissue without detectable heating and/or other structural damage in the surroundings. The technique involves the use of an argon fluoride excimer laser, in the deep ultraviolet (UV) region of the spectrum at 193 nm, which is guided through a glass pipette filled with a positive air pressure. To demonstrate the method, holes were drilled in the zona pellucida of mouse oocytes. The diameter of the drilled hole was determined by the pipette tip size, and its depth by an energy emitted per pulse and number of pulses. Scanning electron microscopy of the drilled mouse oocytes showed uniform, round, well-circumscribed holes with sharp edges. Oocytes that had their zona pellucida drilled with this new method fertilized in vitro and developed to the blastocyst stage in a rate similar to that of control group. These results demonstrate the nonperturbing nature of this cold laser microsurgical procedure. In addition to the extension of our results for clinical in vitro fertilization purposes, such as enhancement of fertilization and embryo biopsy, there are wide-ranging possible uses of our method in fundamental and applied investigations that require submicron accuracy in cellular alteration.

  10. Shock propagation and attenuation in high-power excimer lasers

    Science.gov (United States)

    Holzwarth, Achim; Berger, Peter; Huegel, Helmut

    1993-05-01

    Theoretical and experimental investigations on the propagation, reflection, and attenuation of shock waves as they occur in excimer lasers have been performed. The numerical simulations have been carried out using a two-dimensional, unsteady finite difference scheme. The experimental setup is a piston driven shock tube with a rectangular cross section working in air at atmospheric pressure. The shocks were detected interferometrically as well as by means of pressure transducers. This shock tube allows us to investigate basic phenomena of shock diffraction which can be used to confirm the computational results in the range of weak shock waves. In particular, the influence of the shape of the wall contour on the reflection of shock waves has been investigated theoretically. The decay time of pressure and density perturbations differs for various wall configurations in such a way that short electrodes accelerate the attenuation as well as does a strong area increase in the vicinity of them. After each laser pulse there is a shock travelling into the laser channel. Experiments have been carried out on the reflection of this shock at a specially formed bend that is able to focus the shock into a muffling element.

  11. Microencapsulation of silicon cavities using a pulsed excimer laser

    KAUST Repository

    Sedky, Sherif M.

    2012-06-07

    This work presents a novel low thermal-budget technique for sealing micromachined cavities in silicon. Cavities are sealed without deposition, similar to the silicon surface-migration sealing process. In contrast to the 1100°C furnace anneal required for the migration process, the proposed technique uses short excimer laser pulses (24ns), focused onto an area of 23mm 2, to locally heat the top few microns of the substrate, while the bulk substrate remains near ambient temperature. The treatment can be applied to selected regions of the substrate, without the need for special surface treatments or a controlled environment. This work investigates the effect of varying the laser pulse energy from 400 mJ cm 2to 800 mJ cm 2, the pulse rate from 1Hz to 50Hz and the pulse count from 200 to 3000 pulses on sealing microfabricated cavities in silicon. An analytical model for the effect of holes on the surface temperature distribution is derived, which shows that much higher temperatures can be achieved by increasing the hole density. A mechanism for sealing the cavities is proposed, which indicates how complete sealing is feasible. © 2012 IOP Publishing Ltd.

  12. 308-nm excimer laser ablation of human cartilage

    Science.gov (United States)

    Prodoehl, John A.; Rhodes, Anthony L.; Meller, Menachem M.; Sherk, Henry H.

    1993-07-01

    The XeCl excimer laser was investigated as an ablating tool for human fibrocartilage and hyaline cartilage. Quantitative measurements were made of tissue ablation rates as a function of fluence in meniscal fibrocartilage and articular hyaline cartilage. A force of 1.47 Newtons was applied to an 800 micrometers fiber with the laser delivering a range of fluences (40 to 190 mj/mm2) firing at a frequency of 5 Hz. To assess the effect of repetition rate on ablation rate, a set of measurements was made at a constant fluence of 60 mj/mm2, with the repetition rate varying from 10 to 40 Hz. Histologic and morphometric analysis was performed using light microscopy. The results of these studies revealed that the ablation rate was directly proportional to fluence over the range tested. Fibrocartilage was ablated at a rate 2.56 times faster than hyaline cartilage at the maximum fluence tested. Repetition rate had no effect on the penetration per pulse. Adjacent tissue damage was noted to be minimal (10 - 70 micrometers ).

  13. Histopathological Study of Trabeculum after Excimer Laser Trabeculectomy ab Interno

    Institute of Scientific and Technical Information of China (English)

    Shengsong Huang; Minbin Yu; Guangqiang Feng; Ping Zhang; Changyu Qiu

    2001-01-01

    Purpose: To study the clinical manifestations and histopathologic changes of trabeculum after excimer laser trabeculectomy ab interno (ELT), and to investigate the mechanisms of ELT in reducing intraocular pressure. Methods : ELT was performed on ten rabbit eves and postoperative responses were documented. Comeoscleral tissue samples were harvested consecutively each week until the 5th postoperative week and these samples were examined under light and electrical microscopy. Results: Mild stimulation signs were present postoperatix'ely in nine of ten eyes, but no serious complications were experienced. Obvious inflammation was observed in one rabbit eye as a result of iris damage during the surgical manipulations. Local kactures on the trabecular meshwork and openings into Schlemm' s canal were detected in all tissue samples under light microscope. Mitochondria were found to be turgescent and dilated like vacuoles and endoplasmic reticula were found to be dilated under electrical microscope in the early postoperative period. Later, all trabecular cells returned normal and no fihroblast cells were ever detected. Conclusions: Permanent openings through trabecular meshwork into the inner wall of Schlemm's canal can be created with ELT. The outflow resistance of aqueous humor can be reduced with these openings and intraocular pressure can be controlled thereafter. Eye Science 2001; 17:11 ~ 15.

  14. Transient absorption probe of intermolecular triplet excimer of naphthalene in fluid solutions: Identification of the species based on comparison to the intramolecular triplet excimers of covalently-linked dimers

    Energy Technology Data Exchange (ETDEWEB)

    Wang, X.; Kofron, W.G.; Kong, S.; Rajesh, C.S.; Modarelli, D.A.; Lim, E.C.

    2000-02-24

    The authors report here the observation of the laser-induced transient absorption spectrum of intermolecular triplet excimers of naphthalene in fluid solution. This assignment is confirmed by comparison to the transient absorption spectra of the intramolecular triplet excimers of covalently linked dimers of naphthalene and quinoxaline.

  15. Polycation-induced benzoperylene probe excimer formation and the ratiometric detection of heparin and heparinase.

    Science.gov (United States)

    Yang, Meiding; Chen, Jian; Zhou, Huipeng; Li, Wenying; Wang, Yan; Li, Juanmin; Zhang, Cuiyun; Zhou, Chuibei; Yu, Cong

    2016-01-15

    A benzoperylene probe excimer emission in an aqueous buffer solution is observed for the first time, and a novel ratiometric fluorescence method based on the probe excimer emission for the sensitive detection of heparin and heparinase is demonstrated. A negatively charged benzoperylene derivative, 6-(benzo[ghi]perylene-1,2-dicarboxylic imide-yl)hexanoic acid (BPDI), was employed. A polycation, poly(diallyldimethylammonium) chloride (poly-DDA), could induce aggregation of BPDI through noncovalent interactions. A decrease of BPDI monomer emission and a simultaneous increase of BPDI excimer emission were observed. Upon the addition of heparin, the strong binding between heparin and poly-DDA caused release of BPDI monomer molecules, and an excimer-monomer emission signal transition was detected. However, after the enzymatic hydrolysis of heparin by heparinase, heparin was hydrolyzed into small fragments, which weakened the competitive binding of heparin to poly-DDA. Poly-DDA induced aggregation of BPDI, and a monomer-excimer emission signal transition was detected. Our assay is simple, rapid, inexpensive, sensitive and selective, which could facilitate the heparin and heparinase related biochemical and biomedical research.

  16. KrF excimer laser precision machining of hard and brittle ceramic biomaterials.

    Science.gov (United States)

    Huang, Yao-Xiong; Lu, Jian-Yi; Huang, Jin-Xia

    2014-06-01

    KrF excimer laser precision machining of porous hard-brittle ceramic biomaterials was studied to find a suitable way of machining the materials into various desired shapes and sizes without distorting their intrinsic structure and porosity. Calcium phosphate glass ceramics (CPGs) and hydroxyapatite (HA) were chosen for the study. It was found that KrF excimer laser can cut both CPGs and HA with high efficiency and precision. The ablation rates of CPGs and HA are respectively 0.081 µm/(pulse J cm(-2)) and 0.048 µm/(pulse  J cm(-2)), while their threshold fluences are individually 0.72 and 1.5 J cm(-2). The cutting quality (smoothness of the cut surface) is a function of laser repetition rate and cutting speed. The higher the repetition rate and lower the cutting speed, the better the cutting quality. A comparison between the cross sections of CPGs and HA cut using the excimer laser and using a conventional diamond cutting blade indicates that those cut by the excimer laser could retain their intrinsic porosity and geometry without distortion. In contrast, those cut by conventional machining had distorted geometry and most of their surface porosities were lost. Therefore, when cutting hard-brittle ceramic biomaterials to prepare scaffold and implant or when sectioning them for porosity evaluation, it is better to choose KrF excimer laser machining.

  17. Compaction behavior of isomalt after roll compaction.

    Science.gov (United States)

    Quodbach, Julian; Mosig, Johanna; Kleinebudde, Peter

    2012-09-27

    The suitability of the new isomalt grade galenIQ™ 801 for dry granulation and following tableting is evaluated in this study. Isomalt alone, as well as a blend of equal parts with dibasic calcium phosphate, is roll compacted and tableted. Particle size distribution and flowability of the granules and friability and disintegration time of the tablets are determined. Tensile strength of tablets is related to the specific compaction force during roll compaction and the tableting force. In all cases, the tensile strength increases with raising tableting forces. The specific compaction force has a different influence. For isomalt alone the tensile strength is highest for tablets made from granules prepared at 2 kN/cm and 6 kN/cm and decreases at higher values, i.e., >10 kN/cm. Tensile strength of the blend tablets is almost one third lower compared to the strongest tablets of pure isomalt. Friability of pure isomalt tablets is above the limit. Disintegration time is longest when the tensile strength is at its maximum and decreases with higher porosity and lower tensile strengths. Isomalt proves to be suitable for tableting after roll compaction. Even though the capacity as a binder might not be as high as of other excipients, it is a further alternative for the formulation scientist.

  18. Compaction Behavior of Isomalt after Roll Compaction

    Directory of Open Access Journals (Sweden)

    Peter Kleinebudde

    2012-09-01

    Full Text Available The suitability of the new isomalt grade galenIQ™ 801 for dry granulation and following tableting is evaluated in this study. Isomalt alone, as well as a blend of equal parts with dibasic calcium phosphate, is roll compacted and tableted. Particle size distribution and flowability of the granules and friability and disintegration time of the tablets are determined. Tensile strength of tablets is related to the specific compaction force during roll compaction and the tableting force. In all cases, the tensile strength increases with raising tableting forces. The specific compaction force has a different influence. For isomalt alone the tensile strength is highest for tablets made from granules prepared at 2 kN/cm and 6 kN/cm and decreases at higher values, i.e., >10 kN/cm. Tensile strength of the blend tablets is almost one third lower compared to the strongest tablets of pure isomalt. Friability of pure isomalt tablets is above the limit. Disintegration time is longest when the tensile strength is at its maximum and decreases with higher porosity and lower tensile strengths. Isomalt proves to be suitable for tableting after roll compaction. Even though the capacity as a binder might not be as high as of other excipients, it is a further alternative for the formulation scientist.

  19. Self-Compacting Concrete

    OpenAIRE

    Okamura, Hajime; Ouchi, Masahiro

    2003-01-01

    Self-compacting concrete was first developed in 1988 to achieve durable concrete structures. Since then, various investigations have been carried out and this type of concrete has been used in practical structures in Japan, mainly by large construction companies. Investigations for establishing a rational mix-design method and self-compactability testing methods have been carried out from the viewpoint of making self-compacting concrete a standard concrete.

  20. Self-Compacting Concrete

    OpenAIRE

    Okamura, Hajime; Ouchi, Masahiro

    2003-01-01

    Self-compacting concrete was first developed in 1988 to achieve durable concrete structures. Since then, various investigations have been carried out and this type of concrete has been used in practical structures in Japan, mainly by large construction companies. Investigations for establishing a rational mix-design method and self-compactability testing methods have been carried out from the viewpoint of making self-compacting concrete a standard concrete.

  1. Compact Stellarator Path to DEMO

    Science.gov (United States)

    Lyon, J. F.

    2007-11-01

    Issues for a DEMO reactor are sustaining an ignited/high-Q plasma in steady state, avoiding disruptions and large variations in power flux to the wall, adequate confinement of thermal plasma and alpha-particles, control of a burning plasma, particle and power handling, etc. Compact stellarators have key advantages -- steady-state high-plasma-density operation without external current drive or disruptions, stability without a close conducting wall or active feedback systems, and low recirculating power -- in addition to moderate plasma aspect ratio, good confinement, and high-beta potential. The ARIES-CS study established that compact stellarators can be competitive with tokamaks as reactors. Many of the issues for a compact stellarator DEMO can be answered using results from large tokamaks, ITER D-T experiments and fusion materials, technology and component development programs, in addition to stellarators in operation, under construction or in development. However, a large next-generation stellarator will be needed to address some physics issues: size scaling and confinement at higher parameters, burning plasma issues, and operation with a strongly radiative divertor. Technology issues include simpler coils, structure, and divertor fabrication, and better cost information.

  2. A quencher-free molecular beacon design based on pyrene excimer fluorescence using pyrene-labeled UNA (unlocked nucleic acid)

    DEFF Research Database (Denmark)

    Karlsen, Kasper Kannegård; Okholm, Anders Hauge; Kjems, Jørgen

    2013-01-01

    A quencher-free molecular beacon capable of generating pyrene excimer fluorescence has been constructed using strategically positioned pyrene-UNA monomers. Hybridization of a fully complementary RNA target was accompanied by a pyrene excimer emission increase of more than 900%, and detection of RNA...

  3. A quencher-free molecular beacon design based on pyrene excimer fluorescence using pyrene-labeled UNA (unlocked nucleic acid)

    DEFF Research Database (Denmark)

    Karlsen, Kasper Kannegård; Okholm, Anders Hauge; Kjems, Jørgen

    2013-01-01

    A quencher-free molecular beacon capable of generating pyrene excimer fluorescence has been constructed using strategically positioned pyrene-UNA monomers. Hybridization of a fully complementary RNA target was accompanied by a pyrene excimer emission increase of more than 900%, and detection of RNA...

  4. Compact Antenna Range

    Data.gov (United States)

    Federal Laboratory Consortium — Facility consists of a folded compact antenna range including a computer controlled three axis position table, parabolic reflector and RF sources for the measurement...

  5. Compact Polarimetry Potentials

    Science.gov (United States)

    Truong-Loi, My-Linh; Dubois-Fernandez, Pascale; Pottier, Eric

    2011-01-01

    The goal of this study is to show the potential of a compact-pol SAR system for vegetation applications. Compact-pol concept has been suggested to minimize the system design while maximize the information and is declined as the ?/4, ?/2 and hybrid modes. In this paper, the applications such as biomass and vegetation height estimates are first presented, then, the equivalence between compact-pol data simulated from full-pol data and compact-pol data processed from raw data as such is shown. Finally, a calibration procedure using external targets is proposed.

  6. Mechanics of tissue compaction.

    Science.gov (United States)

    Turlier, Hervé; Maître, Jean-Léon

    2015-12-01

    During embryonic development, tissues deform by a succession and combination of morphogenetic processes. Tissue compaction is the morphogenetic process by which a tissue adopts a tighter structure. Recent studies characterized the respective roles of cells' adhesive and contractile properties in tissue compaction. In this review, we formalize the mechanical and molecular principles of tissue compaction and we analyze through the prism of this framework several morphogenetic events: the compaction of the early mouse embryo, the formation of the fly retina, the segmentation of somites and the separation of germ layers during gastrulation.

  7. Compact Polarimetry Potentials

    Science.gov (United States)

    Truong-Loi, My-Linh; Dubois-Fernandez, Pascale; Pottier, Eric

    2011-01-01

    The goal of this study is to show the potential of a compact-pol SAR system for vegetation applications. Compact-pol concept has been suggested to minimize the system design while maximize the information and is declined as the ?/4, ?/2 and hybrid modes. In this paper, the applications such as biomass and vegetation height estimates are first presented, then, the equivalence between compact-pol data simulated from full-pol data and compact-pol data processed from raw data as such is shown. Finally, a calibration procedure using external targets is proposed.

  8. Compact Antenna Range

    Data.gov (United States)

    Federal Laboratory Consortium — Facility consists of a folded compact antenna range including a computer controlled three axis position table, parabolic reflector and RF sources for the measurement...

  9. Excimer laser annealing: A gold process for CZ silicon junction formation

    Science.gov (United States)

    Wong, David C.; Bottenberg, William R.; Byron, Stanley; Alexander, Paul

    A cold process using an excimer laser for junction formation in silicon has been evaluated as a way to avoid problems associated with thermal diffusion. Conventional thermal diffusion can cause bulk precipitation of SiOx and SiC or fail to completely activate the dopant, leaving a degenerate layer at the surface. Experiments were conducted to determine the feasibility of fabricating high quality p-n junctions using a pulsed excimer laser for junction formation at remelt temperature with ion-implanted surfaces. Solar-cell efficiency exceeding 16 percent was obtained using Czochralski single-crystal silicon without benefit of back surface field or surface passivation. Characterization shows that the formation of uniform, shallow junctions (approximately 0.25 micron) by excimer laser scanning preserves the minority carrier lifetime that leads to high current collection. However, the process is sensitive to initial surface conditions and handling parameters that drive the cost up.

  10. Fast selective metal deposition on polymers by using IR and excimer VUV photons

    Science.gov (United States)

    Esrom, Hilmar

    2000-12-01

    The major advantages of infra-red (IR) lamp induced decomposition of metal organic films for large-area deposition of metal films on substrate surfaces, local excimer laser ablation of thin metal films, and subsequent electroless metal plating were combined to develop a novel fast selective metallisation technique for thermally stable polymers. With the new method, metal structures with high edge quality on different types of polyimide (PI) foils can be produced easily. Without damaging the underlying PI substrate, the metal organic film (e.g. palladium acetate, PdAc) can be decomposed by infra-red irradiation in only about one second. The precise etching capability of ArF excimer laser ablation at λ=193 nm allows the IR-induced palladium (Pd) layers to be removed from the PI surface with one excimer laser pulse, selectively. The residual patterned Pd film on the PI surface then acts as an excellent catalyst for conventional electroless copper plating.

  11. Emission of excimer radiation from direct current, high-pressure hollow cathode discharges

    Science.gov (United States)

    El-Habachi, Ahmed; Schoenbach, Karl H.

    1998-01-01

    A novel, nonequilibrium, high-pressure, direct current discharge, the microhollow cathode discharge, has been found to be an intense source of xenon and argon excimer radiation peaking at wavelengths of 170 and 130 nm, respectively. In argon discharges with a 100 μm diam hollow cathode, the intensity of the excimer radiation increased by a factor of 5 over the pressure range from 100 to 800 mbar. In xenon discharges, the intensity at 170 nm increased by two orders of magnitude when the pressure was raised from 250 mbar to 1 bar. Sustaining voltages were 200 V for argon and 400 V for xenon discharges, at current levels on the order of mA. The resistive current-voltage characteristics of the microdischarges indicate the possibility to form arrays for direct current, flat panel excimer lamps.

  12. Silicon Nitride Film Deposition by Photochemical Vapor Deposition Using an Argon Excimer Lamp

    Science.gov (United States)

    Maezono, Yoshinari; Toshikawa, Kiyohiko; Kurosawa, Kou; Amari, Kouichi; Ishimura, Sou; Katto, Masahito; Yokotani, Atsushi

    2007-06-01

    In this paper, we report the deposition of silicon nitride (SiNx) films for the production of semiconductor devices and flat panel displays, by chemical vapor deposition with vacuum ultraviolet excimer lamps (VUV-CVD) using SiH4 and NH3 as raw materials. An Ar2* excimer lamp (λ=126 nm, hν=9.8 eV) with a high photon energy was used to directly excite and dissociate SiH4 through a photochemical reaction. SiNx films were successfully formed at a low temperature of 100 °C with the Ar2* excimer lamp. Although the Si-rich films were obtained using an Ar2* lamp, they showed a quality almost similar to that of films obtained by conventional plasma-CVD at 400 °C.

  13. Electron-beam-ignited, high-frequency-driven vacuum ultraviolet excimer light source

    CERN Document Server

    Dandl, T; Heindl, T; Krücken, R; Wieser, J; Ulrich, A

    2015-01-01

    Transformation of a table-top electron beam sustained 2.45 GHz RF discharge in rare gases into a self burning discharge has been observed for increasing RF-amplitude. Thereby, the emission spectrum undergoes significant changes in a wide spectral range from the vacuum ultraviolet (VUV) to the near infrared. A strong increase of VUV excimer emission is observed for the self burning discharge. The so called first excimer continuum, in particular, shows a drastic increase in intensity. For argon this effect results in a brilliant light source emitting near the 105 nm short wavelength cutoff of LiF windows. The appearance of a broad-band continuum in the UV and visible range as well as effects of RF excitation on the atomic line radiation and the so called third excimer continuum are briefly described.

  14. [Analyses of biogenic related compounds based on intramolecular excimer-forming fluorescence derivatization].

    Science.gov (United States)

    Yoshida, Hideyuki

    2003-08-01

    A highly selective and sensitive method based on a novel concept is introduced for the assay of biological substances. This method is based on an intramolecular excimer-forming fluorescence derivatization with a pyrene reagent, followed by reverse-phase HPLC. Polyamines, polyphenols, and dicarboxylic acids, which have two or more reactive functional groups in a molecule, were converted to the corresponding polypyrene-labeled derivatives by reaction with the appropriate pyrene reagent. The derivatives exhibited intramolecular excimer fluorescence (440-520 nm), which can clearly be discriminated from the monomer (normal) fluorescence (360-420 nm) emitted by pyrene reagents and monopyrene-labeled derivatives of monofunctional compounds. With excimer fluorescence detection, highly selective and sensitive determination of polyamines, polyphenols, and dicarboxylic acids can be achieved. Furthermore, the methods were successfully applied to the determination of various biological and environmental substances in real samples, which require only a small amount of sample and simple pretreatment.

  15. Calorimetric observation of single He2* excimers in a 100 mK He bath

    CERN Document Server

    Carter, F W; Rooks, M J; McClintock, P V E; McKinsey, D N; Prober, D E

    2016-01-01

    We report the first calorimetric detection of individual He2* excimers within a bath of superfluid 4He. The detector used in this work is a single superconducting titanium transition edge sensor (TES) with an energy resolution of ~1 eV, immersed directly in the helium bath. He2* excimers are produced in the surrounding bath using an external gamma-ray source. These excimers exist either as short-lived singlet or long-lived triplet states. We demonstrate detection of both states: in the singlet case the calorimeter records the absorption of a prompt 15 eV photon, and in the triplet case the calorimeter records a direct interaction of the molecule with the TES surface, which deposits a distinct fraction of the 15 eV, released upon decay, into the surface. We also briefly discuss the detector fabrication and characterization.

  16. Calorimetric Observation of Single {He}_2^* Excimers in a 100-mK He Bath

    Science.gov (United States)

    Carter, F. W.; Hertel, S. A.; Rooks, M. J.; McClintock, P. V. E.; McKinsey, D. N.; Prober, D. E.

    2017-02-01

    We report the first calorimetric detection of individual {He}_2^* excimers within a bath of superfluid ^4{He}. The detector used in this work is a single superconducting titanium transition edge sensor (TES) with an energy resolution of {˜ }1 {eV}, immersed directly in the helium bath. {He}_2^* excimers are produced in the surrounding bath using an external gamma-ray source. These excimers exist either as short-lived singlet or long-lived triplet states. We demonstrate detection (and discrimination) of both states: In the singlet case the calorimeter records the absorption of a prompt {≈ }15 {eV} photon, and in the triplet case the calorimeter records a direct interaction of the molecule with the TES surface, which deposits a distinct fraction of the {≈ }15 {eV}, released upon decay, into the surface. We also briefly discuss the detector fabrication and characterization.

  17. KrF-excimer laser pretreatment and metallization of polymers

    Science.gov (United States)

    Weichenhain, R.; Wesner, D. A.; Pfleging, W.; Horn, H.; Kreutz, E. W.

    1997-02-01

    Metal film adhesion to polymers can be improved by pretreatment with UV-laser radiation before metal deposition. Chemical changes associated with irradiation are investigated for polyimide (PI) and polybutylene terephthalate (PBT) surfaces. Irradiated surfaces are coated with aluminum films ≤10 nm in thickness, enabling the effects of irradiation on the metal/polymer interface to be studied. Irradiation is done in air with KrF-excimer laser radiation (λ=248 nm) at fluences per pulse ≤600 mJ/cm2. The threshold fluence εt for material removal is determined by profilometry measurements of etched features, and the chemical properties of the polymer and the metal/polymer interface are studied with X-ray photoelectron spectroscopy (XPS). Aluminum films are thermally evaporated in situ in the XPS spectrometer. Irradiation of PI at fluences near εt (41 mJ/cm2) results in loss of oxygen and opening of the imide ring, resulting in doubly bonded nitrogen species. After evaporation of aluminum the carbonyl (CO) C1s XPS signal is reduced in intensity, and both Al0 and Al3+ are found, the latter being located at the interface. In comparison to unirradiated areas, irradiated areas have more aluminum in total and a higher proportion of interfacial Al3+ species, indicating an increase in the concentration of metal binding sites. Although for PBT the O to C ratio also decreases with irradiation at fluences near εt (38 mJ/cm2), changes in the amounts of Al0 or Al3+ for irradiated areas in comparison to unirradiated areas are much smaller than for PI and consist mainly of a slight enhancement of Al0 for films deposited on irradiated surfaces.

  18. STUDIES ON THE EXCIMER FLUORESCENCE AND THE STERIC TACTICITY OF POLYPHENYLSILSESQUIOXANES

    Institute of Scientific and Technical Information of China (English)

    HUANG Chaoran; XU Guangzhi; ZHANG Xinsheng; SHI Lianghe

    1987-01-01

    The steric tacticity of polyphenylsilsesquioxanes (PPS) was studied by excimer fluorescence spectroscopy. It was found that the fluorescence of PPS come mainly from its intramolecular excimers. The experimental results indicated that the steric-structure of PPS is most probably cis-isotactic rather than the cis-syndiotactic as suggested in the literature. With the increase in defect content monomer fluorescence intensity increases because of the enhanced mobility of phenyl groups. Molecular weights and molecular weight distributions do not affect the fluorescence spectra of PPS.

  19. Effect of Frequency on Emission of XeIast Excimer in a Pulsed Dielectric Barrier Discharge

    Science.gov (United States)

    Ou, Qiong-Rong; Meng, Yue-Dong; Xu, Xu; Shu, Xing-Sheng; Ren, Zhao-Xing

    2004-07-01

    Emission spectra of XeIast excimers and ultraviolet intensity at 253 nm from a dielectric barrier discharge (DBD) lamp excited by a pulsed voltage were measured as functions of pressure, electrical power, and frequency. In the DBD lamp driven by a higher frequency voltage, a more intense emission of XeIast excimers with high efficiency at 253 nm was found. A diffuse discharge mode was observed at high xenon pressure (>1 atm) with an excessive iodine concentration in the DBD driven by a high frequency (60 kHz) voltage.

  20. Effect of Frequency on Emission of XeI* Excimer in a Pulsed Dielectric Barrier Discharge

    Institute of Scientific and Technical Information of China (English)

    OU Qiong-Rong; MENG Yue-Dong; XU Xu; SHU Xing-Sheng; REN Zhao-Xing

    2004-01-01

    Emission spectra of XeI* excimers and ultraviolet intensity at 253 nm from a dielectric barrier discharge (DBD)lamp excited by a pulsed voltage were measured as functions of pressure, electrical power, and frequency. In the DBD lamp driven by a higher frequency voltage, a more intense emission of XeI* excimers with high efficiency at 253 nm was found. A diffuse discharge mode was observed at high xenon pressure (> 1 atm) with an excessive iodine concentration in the DBD driven by a high frequency (60 kHz) voltage.

  1. Bound-bound transitions in the emission spectra of Ba$^{+}$--He excimer

    OpenAIRE

    Moroshkin, Peter; Kono, Kimitoshi

    2016-01-01

    We present an experimental and theoretical study of the emission and absorption spectra of the Ba$^{+}$ ions and Ba$^{+\\ast}$He excimer quasimolecules in the cryogenic Ba--He plasma. We observe several new spectral features in the emission spectrum which we assign to the electronic transitions between bound states of the excimer correlating to the 6$^{2}P_{3/2}$ and 5$^{2}D_{3/2,5/2}$ states of Ba$^{+}$. The resulting Ba$^{+}$(5$^{2}D_{J}$)He is a metastable electronically excited complex wit...

  2. Compaction properties of isomalt

    NARCIS (Netherlands)

    Bolhuis, Gerad K.; Engelhart, Jeffrey J. P.; Eissens, Anko C.

    2009-01-01

    Although other polyols have been described extensively as filler-binders in direct compaction of tablets, the polyol isomalt is rather unknown as pharmaceutical excipient, in spite of its description in all the main pharmacopoeias. In this paper the compaction properties of different types of ispoma

  3. Compact Information Representations

    Science.gov (United States)

    2016-08-02

    network traffic, information retrieval, and databases are faced with very large, inherently high-dimensional, or naturally streaming datasets. This...proposal aims at developing mathematically rigorous and general- purpose statistical methods based on stable random projections, to achieve compact...detections (e.g., DDoS attacks), machine learning, databases , and search. Fundamentally, compact data representations are highly beneficial because they

  4. Compaction properties of isomalt.

    Science.gov (United States)

    Bolhuis, Gerad K; Engelhart, Jeffrey J P; Eissens, Anko C

    2009-08-01

    Although other polyols have been described extensively as filler-binders in direct compaction of tablets, the polyol isomalt is rather unknown as pharmaceutical excipient, in spite of its description in all the main pharmacopoeias. In this paper the compaction properties of different types of ispomalt were studied. The types used were the standard product sieved isomalt, milled isomalt and two types of agglomerated isomalt with a different ratio between 6-O-alpha-d-glucopyranosyl-d-sorbitol (GPS) and 1-O-alpha-d-glucopyranosyl-d-mannitol dihydrate (GPM). Powder flow properties, specific surface area and densities of the different types were investigated. Compactibility was investigated by compression of the tablets on a compaction simulator, simulating the compression on high-speed tabletting machines. Lubricant sensitivity was measured by compressing unlubricated tablets and tablets lubricated with 1% magnesium stearate on an instrumented hydraulic press. Sieved isomalt had excellent flow properties but the compactibility was found to be poor whereas the lubricant sensitivity was high. Milling resulted in both a strong increase in compactibility as an effect of the higher surface area for bonding and a decrease in lubricant sensitivity as an effect of the higher surface area to be coated with magnesium stearate. However, the flow properties of milled isomalt were too bad for use as filler-binder in direct compaction. Just as could be expected, agglomeration of milled isomalt by fluid bed agglomeration improved flowability. The good compaction properties and the low lubricant sensitivity were maintained. This effect is caused by an early fragmentation of the agglomerated material during the compaction process, producing clean, lubricant-free particles and a high surface for bonding. The different GPS/GPM ratios of the agglomerated isomalt types studied had no significant effect on the compaction properties.

  5. Extended Operations of the Pratt & Whitney Rocketdyne Pilot-Scale Compact Reformer: Year 6 - Activity 3.2 - Development of a National Center for Hydrogen Technology

    Energy Technology Data Exchange (ETDEWEB)

    Almlie, Jay

    2011-10-01

    U.S. and global demand for hydrogen is large and growing for use in the production of chemicals, materials, foods, pharmaceuticals, and fuels (including some low-carbon biofuels). Conventional hydrogen production technologies are expensive, have sizeable space requirements, and are large carbon dioxide emitters. A novel sorbent-based hydrogen production technology is being developed and advanced toward field demonstration that promises smaller size, greater efficiency, lower costs, and reduced to no net carbon dioxide emissions compared to conventional hydrogen production technology. Development efforts at the pilot scale have addressed materials compatibility, hot-gas filtration, and high-temperature solids transport and metering, among other issues, and have provided the basis for a preliminary process design with associated economics. The process was able to achieve a 93% hydrogen purity on a purge gasfree basis directly out of the pilot unit prior to downstream purification.

  6. Small Valdivia compact spaces

    CERN Document Server

    Kubi's, W; Kubi\\'s, Wieslaw; Michalewski, Henryk

    2005-01-01

    We prove a preservation theorem for the class of Valdivia compact spaces, which involves inverse sequences of ``simple'' retractions. Consequently, a compact space of weight $\\loe\\aleph_1$ is Valdivia compact iff it is the limit of an inverse sequence of metric compacta whose bonding maps are retractions. As a corollary, we show that the class of Valdivia compacta of weight at most $\\aleph_1$ is preserved both under retractions and under open 0-dimensional images. Finally, we characterize the class of all Valdivia compacta in the language of category theory, which implies that this class is preserved under all continuous weight preserving functors.

  7. UV excimer laser and low temperature plasma treatments of polyamide materials

    Science.gov (United States)

    Yip, Yiu Wan Joanne

    Polyamides have found widespread application in various industrial sectors, for example, they are used in apparel, home furnishings and similar uses. However, the requirements for high quality performance products are continually increasing and these promote a variety of surface treatments for polymer modification. UV excimer laser and low temperature plasma treatments are ideally suited for polyamide modification because they can change the physical and chemical properties of the material without affecting its bulk features. This project aimed to study the modification of polyamides by UV excimer laser irradiation and low temperature plasma treatment. The morphological changes in the resulting samples were analysed by scanning electron microscopy (SEM) and tapping mode atomic force microscopy (TM-AFM). The chemical modifications were studied by x-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (ToF-SIMS) and chemical force microscopy (CFM). Change in degree of crystallinity was examined by differential scanning calorimetry (DSC). After high-fluence laser irradiation, topographical results showed that ripples of micrometer size form on the fibre surface. By contrast, sub-micrometer size structures form on the polyamide surface when the applied laser energy is well below its ablation threshold. After high-fluence laser irradiation, chemical studies showed that the surface oxygen content of polyamide is reduced. A reverse result is obtained with low-fluence treatment. The DSC result showed no significant change in degree of crystallinity in either high-fluence or low-fluence treated samples. The same modifications in polyamide surfaces were studied after low temperature plasma treatment with oxygen, argon or tetrafluoromethane gas. The most significant result was that the surface oxygen content of polyamide increased after oxygen and argon plasma treatments. Both treatments induced many hydroxyl (-OH) and carboxylic acid (-COOH

  8. Excimer laser crystallization of InGaZnO4 on SiO2 substrate

    NARCIS (Netherlands)

    Chen, T.; Wu, M.-Y.; Ishihara, R.; Nomura, K.; Kamiya, T.; Hosono, H.; Beenakker, C.I.M.

    2011-01-01

    In this paper, we were able to crystallize InGaZnO4 (IGZO) by excimer laser on SiO2 substrate. It was observed that uniform [0001] textured polycrystalline IGZO film has been obtained without any grain boundaries and oxygen vacancies on SiO2 substrate. This process is very promising in fabricating h

  9. Shadowgraphic imaging of metal drilling with a long pulse excimer laser

    NARCIS (Netherlands)

    Schoonderbeek, Aart; Biesheuvel, Cornelis A.; Hofstra, Ramon M.; Boller, Klaus-J.; Meijer, Johan; Miyamoto, Isamu; Ostendorf, Andreas; Sugioka, Koji; Helvajian, Henry

    2003-01-01

    A shadowgraphic imaging technique is used for studying the interaction between the laser beam and the material during laser drilling. The used laser is a XeCl excimer laser with a nearly diffraction limited beam and 175 ns pulse length. We studied how and when the material is removed. Holes are dril

  10. Properties of human dentin surface after ArF excimer laser irradiation.

    Science.gov (United States)

    Ishida, Tomohiro; Tonami, Ken-ichi; Araki, Kouji; Kurosaki, Norimasa

    2008-03-01

    Recently, improvement of the properties of dentin surface using dental lasers to increase bonding strength has been anticipated in the field of adhesive dentistry. The objective of this study was to investigate changes in the surface properties of human dentin after ArF excimer laser irradiation at different irradiation times, pulse repetition rates and energy densities. The SEM images of the irradiated surfaces were observed, and the contact angle and the roughness of the irradiated surface were measured. As a result, SEM demonstrated that the dentin surface became irregular following ArF excimer laser irradiation. When the energy density increased, the irregularity became more minute and dentinal tubules were more easily identified. By contrast, such changes were not observed when the irradiation time and pulse repetition rate were changed. Moreover, as energy densities increased, the contact angle tended to decrease and the surface roughness tended to increase. These results suggested that the area of the irradiated surface and wettability increased after irradiation with the ArF excimer laser. Consequently, irradiation with ArF excimer lasers could improve the surface properties and be potentially useful for adhesive dentistry.

  11. Prevention and treatment of transient dry eye following excimer laser surgery

    Directory of Open Access Journals (Sweden)

    V. V. Pogorelovа

    2015-01-01

    Full Text Available To compare dry eye symptoms after LASIK with mechanical keratome-created flaps and femtosecond laser keratome-created flaps as well as to analyze the efficacy of Systane® Ultra Monodose used to prevent and to treat transient dry eye after excimer laser surgery. Methods: 98 patients (194 eyes with myopia and compound myopic astigmatism who underwent excimer laser surgery were included in the study. In group 1 patients with pre-op dry eye, femtosecond laser-assisted LASIK was performed, Systane® Ultra Monodose was prescribed postoperatively. In group 2 patients with pre-op dry eye, LASIK was performed using mechanical microkeratome, Systane® Ultra Monodose was prescribed postoperatively. In group 3 patients without pre-op dry eye, LASIK was performed using mechanical microkeratome, standard anti-inflammatory therapy without any lubricant eye drops was prescribed. Patients were followed up for 60 days. Results: It was demonstrated that excimer laser surgery provokes transient dry eye in all patients, therefore, artificial tears are required for 2 months and more after the surgery. Post-operative lubricant eye drops use improves tear film stability, tear production, tear osmolarity, and objective signs of dry eye. Femtosecond laser decreases clinical and functional symptoms of transient dry eye as compared with mechanical microkeratome and provides more rapid visual recovery. Conclusion: Systane® Ultra Monodose has both high efficiency and good tolerability. It can be recommended for the prevention and treatment of dry eye following excimer laser surgery.

  12. Prevention and treatment of transient dry eye following excimer laser surgery

    Directory of Open Access Journals (Sweden)

    V. V. Pogorelovа

    2014-01-01

    Full Text Available To compare dry eye symptoms after LASIK with mechanical keratome-created flaps and femtosecond laser keratome-created flaps as well as to analyze the efficacy of Systane® Ultra Monodose used to prevent and to treat transient dry eye after excimer laser surgery. Methods: 98 patients (194 eyes with myopia and compound myopic astigmatism who underwent excimer laser surgery were included in the study. In group 1 patients with pre-op dry eye, femtosecond laser-assisted LASIK was performed, Systane® Ultra Monodose was prescribed postoperatively. In group 2 patients with pre-op dry eye, LASIK was performed using mechanical microkeratome, Systane® Ultra Monodose was prescribed postoperatively. In group 3 patients without pre-op dry eye, LASIK was performed using mechanical microkeratome, standard anti-inflammatory therapy without any lubricant eye drops was prescribed. Patients were followed up for 60 days. Results: It was demonstrated that excimer laser surgery provokes transient dry eye in all patients, therefore, artificial tears are required for 2 months and more after the surgery. Post-operative lubricant eye drops use improves tear film stability, tear production, tear osmolarity, and objective signs of dry eye. Femtosecond laser decreases clinical and functional symptoms of transient dry eye as compared with mechanical microkeratome and provides more rapid visual recovery. Conclusion: Systane® Ultra Monodose has both high efficiency and good tolerability. It can be recommended for the prevention and treatment of dry eye following excimer laser surgery.

  13. Influence of gas discharge parameters on emissions from a dielectric barrier discharge excited argon excimer lamp

    Directory of Open Access Journals (Sweden)

    Mike Collier

    2011-11-01

    Full Text Available A dielectric barrier discharge excited neutral argon (Ar I excimer lamp has been developed and characterised. The aim of this study was to develop an excimer lamp operating at atmospheric pressure that can replace mercury lamps and vacuum equipment used in the sterilisation of medical equipment and in the food industry. The effects of discharge gas pressure, flow rate, excitation frequency and pulse width on the intensity of the Ar I vacuum ultraviolet (VUV emission at 126 nm and near infrared (NIR lines at 750.4 nm and 811.5 nm have been investigated. These three lines were chosen as they represent emissions resulting from de-excitation of excimer states that emit energetic photons with an energy of 9.8 eV. We observed that the intensity of the VUV Ar2* excimer emission at 126 nm increased with increasing gas pressure, but decreased with increasing excitation pulse frequency and pulse width. In contrast, the intensities of the NIR lines decreased with increasing gas pressure and increased with increasing pulse frequency and pulse width. We have demonstrated that energetic VUV photons of 9.8 eV can be efficiently generated in a dielectric barrier discharge in Ar.

  14. Self-Organization Phenomenon Observed in Piezoelectric Transformer-based Excimer Lamp

    Science.gov (United States)

    Itoh, Haruo; Suzuki, Susumu; Teranishi, Kenji; Shimomura, Naoyuki

    An excimer lamp constructed by a piezoelectric transformer (PT) has been developed and studied in our laboratory. The excimer lamp is based on the excitation of dielectric barrier discharge (DBD) generated by the PT surface that induces high-voltage due to the piezoelectric effect. Spectroscopic measurement in the vacuum ultraviolet (VUV) region is performed for the excimer lamp filling with a He-Xe mixture and Ar. Emission spectra having a peak at 172 and 126 nm are found, which are respectively radiated from the Xe2* and Ar2* excimers that returns to ground states. A self-organization phenomenon (SOP) is also recognized in the He and Ar DBD. Static and time-resolved observations of the self-organized patterns are performed by a single reflex and ICCD cameras, respectively. The formation of self-organized patterns in argon requires a small amount of the air as an additive. From the time-resolved observation, we found dark spots arrayed hexagonally in a weak emission on the PT surface whose arrangement well coincides with that of bright hexagonal filaments. The dark spots are considered as the traces of the accumulated charges on the dielectric electrode, which interrupt the hexagonally filamentary discharges.

  15. On the operation of a long-pulse KrCl excimer laser

    NARCIS (Netherlands)

    Casper, Lars Christian

    2007-01-01

    High-power lasers pumped by a gas discharge are extensively used in industrial applications. Of particular importance are lasers pumped by an electric discharge in excimer gas mixtures because this allows the generation of powerful ultraviolet radiation (UV), with wavelengths below 350 nm. Due to th

  16. Refractive microlenses produced by excimer laser machining of poly(methyl methacrylate)

    DEFF Research Database (Denmark)

    Jensen, Martin Frøhling; Krühne, Ulrich; H., L.

    2005-01-01

    A method has been developed whereby refractive microlenses can be produced in poly (methyl methacrylate) by excimer laser irradiation at λ = 248 nm. The lenses are formed by a combined photochemical and thermal process. The lenses are formed as depressions in the substrate material (negative focal...

  17. Shadowgraphic imaging of metal drilling with a long pulse excimer laser

    NARCIS (Netherlands)

    Schoonderbeek, A.; Biesheuvel, C.A.; Hofstra, R.M.; Boller, Klaus J.; Meijer, J.; Miyamoto, Isamu; Ostendorf, Andreas; Sugioka, Koji; Helvajian, Henry

    2003-01-01

    A shadowgraphic imaging technique is used for studying the interaction between the laser beam and the material during laser drilling. The used laser is a XeCl excimer laser with a nearly diffraction limited beam and 175 ns pulse length. We studied how and when the material is removed. Holes are dril

  18. Comparison of the excimer laser with the erbium yttrium aluminum garnet laser for applications in osteotomy

    Science.gov (United States)

    Li, Zhao-zhang; Van De Merwe, Willem P.; Reinisch, Lou

    1991-06-01

    The ablative removal of bone tissue and the accompanying acoustic wave have been studied in a liquid environment using an ultraviolet excimer laser (Argon Fluoride and Krypton Fluoride) and a mid-infrared Erbium Yttrium Aluminum Garnet (Er:YAG) laser

  19. On the operation of a long-pulse KrCl excimer laser

    NARCIS (Netherlands)

    Casper, L.C.

    2007-01-01

    High-power lasers pumped by a gas discharge are extensively used in industrial applications. Of particular importance are lasers pumped by an electric discharge in excimer gas mixtures because this allows the generation of powerful ultraviolet radiation (UV), with wavelengths below 350 nm. Due to

  20. Study of Nanocrystalline Diamond Film Deposited Rapidly by 500 W Excimer Laser

    Institute of Scientific and Technical Information of China (English)

    PENG Hongyan; SHEN Jiajing; YANG Guilong

    2000-01-01

    High quality nanocrystalline diamond film deposited rapidly by an XeCl excimer laser operated at high laser power (500 W) and repetition rate (300~500 Hz) is presented. A high deposition rate, 250 nm/thousand pulses, was obtained. The effects of laser energy fluence and repetition rate on the deposition of diamond film were investigated.

  1. Photoelectric effects in x-ray preionization for excimer laser gases

    NARCIS (Netherlands)

    Azarov, A.V.; Peters, P.J.M.; Boller, K.-J.

    2008-01-01

    We present detailed measurements on the x-ray preionization electron density in a discharge chamber filled with different gases relevant to discharge pumped high-pressure excimer lasers. By comparing experimental results with the theoretical electron densities, we conclude that the observed preioniz

  2. Pustular Palmoplantar Psoriasis Successfully Treated with Nb-UVB Monochromatic Excimer Light: A Case-Report

    Directory of Open Access Journals (Sweden)

    Serena Gianfaldoni

    2017-07-01

    Full Text Available Barber’s palmoplantar pustulosis (PPP is a form of localised pustular psoriasis, affecting the palmar and plantar surfaces. It is a chronic disease, with a deep impact on the patients’ quality of life. The Authors discuss a case of Baber Psoriasis successfully treated with monochromatic excimer light.

  3. Laser drilling of metals with a XeCl excimer laser

    NARCIS (Netherlands)

    Schoonderbeek, A.

    2005-01-01

    This thesis is about laser drilling with a unique excimer laser with a nearly diffraction-limited beam and relatively long optical pulse duration of 175 ns. The combination of high processing speed and high processing quality suitable for industrial applications can be obtained because the excellent

  4. Preionization and gain studies in fluorine based excimer laser gas discharges

    NARCIS (Netherlands)

    Azarov, A.V.

    2008-01-01

    Fluorine-based excimer gas lasers are powerful sources of coherent radiation in the UV and VUV part of the electro-magnetic spectrum. Due to their short wavelengths and high output power they are widely employed in high resolution material processing like micromachining and in lithography. In this

  5. Observation of crossover from ballistic to diffusion regime for excimer molecules in superfluid 4He

    OpenAIRE

    Zmeev, Dmitriy; Papkour, F.; Walmsley, P. M.; Golov, A.; McClintock, Peter V. E.; Fisher, Shaun N.; Guo, Wei; McKinsey, D. N.; Ihas, Gary G.; Vinen, W. F.

    2013-01-01

    We have measured the temperature dependence of the time of flight of helium excimer molecules He2 (a3 Σ + u ) in superfluid 4He and find that the molecules behave ballistically below ∼100 mK and exhibit Brownian motion above ∼200 mK. In the intermediate temperature range the transport cannot be described by either of the models.

  6. Observation of Crossover from Ballistic to Diffusion Regime for Excimer Molecules in Superfluid 4He

    Science.gov (United States)

    Zmeev, D. E.; Papkour, F.; Walmsley, P. M.; Golov, A. I.; McClintock, P. V. E.; Fisher, S. N.; Guo, W.; McKinsey, D. N.; Ihas, G. G.; Vinen, W. F.

    2013-05-01

    We have measured the temperature dependence of the time of flight of helium excimer molecules {He}2^{*}(a3Σ +u) in superfluid 4He and find that the molecules behave ballistically below ˜100 mK and exhibit Brownian motion above ˜200 mK. In the intermediate temperature range the transport cannot be described by either of the models.

  7. Excimer laser therapy and narrowband ultraviolet B therapy for exfoliative cheilitis

    Directory of Open Access Journals (Sweden)

    Bhavnit K. Bhatia, BA

    2015-06-01

    Conclusion: Excimer laser therapy is a well-tolerated and effective treatment for refractory exfoliative cheilitis with twice weekly laser treatments of up to 700 mJ/cm2. Transitioning to the hand-held narrowband UVB device was also an effective maintenance strategy.

  8. Discharge instabilities in high-pressure fluorine based excimer laser gas mixtures

    NARCIS (Netherlands)

    Mathew, D.

    2007-01-01

    Fluorine based excimer lasers such as KrF, ArF and F2 are currently the most powerful sources available in the ultraviolet wavelength range, operating at 248 nm, at 193 nm and at 157 nm, respectively. They are thus of central importance for numerous applications in this range. At these short

  9. Evaluation and further development of the Excimer Laser Assisted Non-occlusive Anastomosis (ELANA) technique

    NARCIS (Netherlands)

    van Doormaal, T.P.C.

    2010-01-01

    The research described in this thesis had 2 main goals. The first goal was to evaluate the clinical results of the Excimer Laser Assisted Non-occlusive Anastomosis (ELANA) technique. The most important subgroups of patients were separately evaluated in the first part of this thesis (chapters 2 to 5)

  10. 20 years of KVH fiber optic gyro technology: the evolution from large, low performance FOGs to compact, precise FOGs and FOG-based inertial systems

    Science.gov (United States)

    Napoli, Jay

    2016-05-01

    Precision fiber optic gyroscopes (FOGs) are critical components for an array of platforms and applications ranging from stabilization and pointing orientation of payloads and platforms to navigation and control for unmanned and autonomous systems. In addition, FOG-based inertial systems provide extremely accurate data for geo-referencing systems. Significant improvements in the performance of FOGs and FOG-based inertial systems at KVH are due, in large part, to advancements in the design and manufacture of optical fiber, as well as in manufacturing operations and signal processing. Open loop FOGs, such as those developed and manufactured by KVH Industries, offer tactical-grade performance in a robust, small package. The success of KVH FOGs and FOG-based inertial systems is due to innovations in key fields, including the development of proprietary D-shaped fiber with an elliptical core, and KVH's unique ThinFiber. KVH continually improves its FOG manufacturing processes and signal processing, which result in improved accuracies across its entire FOG product line. KVH acquired its FOG capabilities, including its patented E•Core fiber, when the company purchased Andrew Corporation's Fiber Optic Group in 1997. E•Core fiber is unique in that the light-guiding core - critical to the FOG's performance - is elliptically shaped. The elliptical core produces a fiber that has low loss and high polarization-maintaining ability. In 2010, KVH developed its ThinFiber, a 170-micron diameter fiber that retains the full performance characteristics of E•Core fiber. ThinFiber has enabled the development of very compact, high-performance open-loop FOGs, which are also used in a line of FOG-based inertial measurement units and inertial navigation systems.

  11. Reasearch of Compact LTCC Lowpass Filter Design and Technology%小型化LTCC低通滤波器设计与制造工艺研究

    Institute of Scientific and Technical Information of China (English)

    王颖麟; 薛耀平

    2013-01-01

    Firstly a new type miniaturized LTCC filter is designed in this paper, the design and simulation of the filter schematic was completed based on LC lumped elements. Besides a filter model was simulated in Ansoft-HFSS. Finally a product sample was manufactured. The LTCC material is a dielectric constant εr of 7.8, a loss tangent of 0.006. the inner conductor sliver paste which must be compatible with the LTCC green tape. The LPF is small size 3.2 mm×1.6 mm, thickness is 1.4 mm. It can be widely employed in compact microwave communication systems.%  设计了一种小型化的LTCC低通滤波器,采用LC集总元件完成原理图的设计与仿真,使用HFSS完成滤波器结构的三维电磁场仿真,最终在LTCC工艺线上完成加工制作.LTCC滤波器使用介电常数7.8、损耗角为0.006的生瓷片,内部导体电路印刷使用配套的银浆料,最终尺寸为3.2 mm×1.6 mm,厚度为1.4 mm,达到小型化的目的,可应用于移动通信等领域.

  12. House technology - compact modules for passive houses. A system solution offered by craftsmen; Haustechnik - Kompaktmodule fuer Passivhaeuser. Eine Systemloesung des Handwerks

    Energy Technology Data Exchange (ETDEWEB)

    Lackenbauer, A. [Lackenbauer PassivHaustechnik, Traunstein (Germany)

    2001-02-01

    The solutions that have been available on the market so far are basically a combination of individual components, which are combined to functioning units on the individual construction sites according to methods usually applied by the installation craftsmanship. There are different constructional units within the same craftsman business. The following distinctions are made: ventilation devices, which provide the essential functions for inlet and outlet ventilation with heat recovery in a single apparatus, gas wall heating boilers, which combine the functions of a complete heating control centre in the smallest space, and e.g. solar pumps and control groups, which combine the necessary accessories for collectors and solar storage in one constructional unit. However these individual constructional units have several disadvantages. Individual manufacturers have noticed this potential and offer a compact solution for the passive house-one-family house that combines all heating, ventilation and warm water provision functions. These systems took over the market lead in the field of one-family house-passive house. (orig.) [German] Die bisher am Markt erhaeltlichen Loesungen stellen im wesentlichen eine Kombination aus Einzelteilen dar, die den im Installations-Handwerk ueblichen Verfahrensweisen entsprechend auf den Baustellen individuell zu funktionierenden Einheiten verbunden werden. Innerhalb des jeweiligen Gewerkes gibt es verschiedene Baueinheiten. Man unterscheidet Lueftungsgeraete, die die wesentlichen Funktionen zur Be- und Entlueftung mit Waermerueckgewinnung in einem Geraet zur Verfuegung stellen, Gas-Wandheizkessel, die die Funktion einer ganzen Heizzentrale auf kleinstem Raum buendeln, und z.B. Solarpumpen und Regelgruppen, die das erforderliche Zubehoer fuer die Verbindung von Kollektoren und Solarspeicher in einer Baugruppe sammeln. Diese einzelnen Bausteine haben jedoch mehrere Nachteile. Einzelne Hersteller haben das Potential erkannt und bieten eine

  13. A comparison of the characteristics of excimer and femtosecond laser ablation of acrylonitrile butadiene styrene (ABS)

    Energy Technology Data Exchange (ETDEWEB)

    See, Tian Long, E-mail: tianlong.see@postgrad.manchester.ac.uk [Corrosion and Protection Centre, School of Materials, The Mill, The University of Manchester, M13 9PL Manchester (United Kingdom); Laser Processing Research Centre, School of Mechanical, Aerospace and Civil Engineering, The University of Manchester, M13 9PL Manchester (United Kingdom); Liu, Zhu [Corrosion and Protection Centre, School of Materials, The Mill, The University of Manchester, M13 9PL Manchester (United Kingdom); Li, Lin [Laser Processing Research Centre, School of Mechanical, Aerospace and Civil Engineering, The University of Manchester, M13 9PL Manchester (United Kingdom); Zhong, Xiang Li [Corrosion and Protection Centre, School of Materials, The Mill, The University of Manchester, M13 9PL Manchester (United Kingdom)

    2016-02-28

    Highlights: • Ablation threshold for excimer laser is lower compared to femtosecond laser. • Effective optical penetration depth for excimer laser is lower compared to femtosecond laser. • Two ablation characteristic regimes are observed for femtosecond laser ablation. • Reduction of C=C bond following excimer or fs laser ablation is observed. • Addition of oxygen- and nitrogen-rich functional groups is observed. - Abstract: This paper presents an investigation on the ablation characteristics of excimer laser (λ = 248 nm, τ = 15 ns) and femtosecond laser (λ = 800 nm, τ = 100 fs) on ABS polymer sheets. The laser–material interaction parameters (ablation threshold, optical penetration depth and incubation factor) and the changes in material chemical properties were evaluated and compared between the two lasers. The work shows that the ablation threshold and effective optical penetration depth values are dependent on the wavelength of laser beam (photon energy) and the pulse width. The ablation threshold value is lower for the excimer laser ablation of ABS (F{sub th} = 0.087 J/cm{sup 2}) than that for the femtosecond laser ablation of ABS (F{sub th} = 1.576 J/cm{sup 2}), demonstrating a more dominating role of laser wavelength than the pulse width in influencing the ablation threshold. The ablation depth versus the logarithmic scale of laser fluence shows two linear regions for the fs laser ablation, not previously known for polymers. The effective optical penetration depth value is lower for excimer laser ablation (α{sup −1} = 223 nm) than that for femtosecond laser ablation (α{sup −1} = 2917 nm). The ablation threshold decreases with increasing number of pulses (NOP) due to the chain scission process that shortens the polymeric chains, resulting in a weaker polymeric configuration and the dependency is governed by the incubation factor. Excimer laser treatment of ABS eliminates the C=C bond completely through the chain scission process whereas

  14. Compact microchannel system

    Science.gov (United States)

    Griffiths, Stewart

    2003-09-30

    The present invention provides compact geometries for the layout of microchannel columns through the use of turns and straight channel segments. These compact geometries permit the use of long separation or reaction columns on a small microchannel substrate or, equivalently, permit columns of a fixed length to occupy a smaller substrate area. The new geometries are based in part on mathematical analyses that provide the minimum turn radius for which column performance in not degraded. In particular, we find that straight channel segments of sufficient length reduce the required minimum turn radius, enabling compact channel layout when turns and straight segments are combined. The compact geometries are obtained by using turns and straight segments in overlapped or nested arrangements to form pleated or coiled columns.

  15. Pathway to a compact SASE FEL device

    Energy Technology Data Exchange (ETDEWEB)

    Dattoli, G., E-mail: giuseppe.dattoli@enea.it [ENEA – Centro Ricerche Frascati, Via Enrico Fermi 45, 00044 Frascati, Rome (Italy); Di Palma, E. [ENEA – Centro Ricerche Frascati, Via Enrico Fermi 45, 00044 Frascati, Rome (Italy); Petrillo, V. [Università degli Studi di Milano, via Celoria 16, 20133 Milano (Italy); Rau, Julietta V. [Istituto di Struttura della Materia, ISM-CNR, Via del Fosso del Cavaliere, 100-00133 Rome (Italy); Sabia, E.; Spassovsky, I. [ENEA – Centro Ricerche Frascati, Via Enrico Fermi 45, 00044 Frascati, Rome (Italy); Biedron, S.G.; Einstein, J.; Milton, S.V. [CSU – Colorado State University, Fort Collins, CO (United States)

    2015-10-21

    Newly developed high peak power lasers have opened the possibilities of driving coherent light sources operating with laser plasma accelerated beams and wave undulators. We speculate on the combination of these two concepts and show that the merging of the underlying technologies could lead to new and interesting possibilities to achieve truly compact, coherent radiator devices.

  16. Pathway to a Compact SASE FEL Device

    CERN Document Server

    Dattoli, G; Petrillo, V; Rau, J V; Sabia, E; Spassovsky, I; Biedron, S G; Einstein, J; Milton, S V

    2015-01-01

    Newly developed high peak power lasers have opened the possibilities of driving coherent light sources operating with laser plasma accelerated beams and wave undulators. We speculate on the combination of these two concepts and show that the merging of the underlying technologies could lead to new and interesting possibilities to achieve truly compact, coherent radiator devices.

  17. The next-generation ArF excimer laser for multiple-patterning immersion lithography with helium free operation

    Science.gov (United States)

    Miyamoto, Hirotaka; Kumazaki, Takahito; Tsushima, Hiroaki; Kurosu, Akihiko; Ohta, Takeshi; Matsunaga, Takashi; Mizoguchi, Hakaru

    2016-03-01

    Multiple patterning ArF immersion lithography has been expected as the promising technology to satisfy tighter leading edge device requirements. A new ArF excimer laser, GT64A has been developed to cope with the prevention against rare resource shortage and the reduction of operational costs. GT64A provides the sophisticated technologies which realize the narrow spectral bandwidth with helium free operation. A helium gas purge has usually been employed due to the low refractive index variation with temperature rises within a line narrowing module(LNM). Helium is a non-renewable resource and the world's reserves have been running out. Nitrogen gas with an affordable price has been used as an alternative purge gas of helium on the restrictive condition of low thermal loads. However, the refractive index variation of nitrogen gas is approximately ten times more sensitive to temperature rises than that of helium, and broadens a spectral bandwidth in the high duty cycle operations. The new LNM design enables heat effect in laser shooting at optical elements and mechanical components in the vicinity of an optical path to be lower. This reduces thermal wavefront deformation of a laser beam without helium gas purge within LNM, and narrows a spectrum bandwidth without helium purge. Gigaphoton proved that the new LNM enabled E95 bandwidth without control to improve a lot with nitrogen purge.

  18. Compactness theorems of fuzzy semantics

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The relationship among diverse fuzzy semantics vs. the corresponding logic consequence operators has been analyzed systematically. The results that compactness and logical compactness of fuzzy semantics are equivalent to compactness and continuity of the logic consequence operator induced by the semantics respectively have been proved under certain conditions. A general compactness theorem of fuzzy semantics have been established which says that every fuzzy semantics defined on a free algebra with members corresponding to continuous functions is compact.

  19. Compact superconducting coplanar microwave beam splitters

    Energy Technology Data Exchange (ETDEWEB)

    Baust, Alexander; Haeberlein, Max; Goetz, Jan; Hoffmann, Elisabeth; Menzel, Edwin P.; Schwarz, Manuel J.; Wulschner, Friedrich; Zhong, Ling; Deppe, Frank; Marx, Achim; Gross, Rudolf [Walther-Meissner-Institut, Bayerische Akademie der Wissenschaften, Garching (Germany); Physik-Department, TUM, Garching (Germany); Kalb, Norbert; Losinger, Thomas [Physik-Department, TUM, Garching (Germany)

    2012-07-01

    The recent evolution of circuit quantum electrodynamics systems making use of standing-wave microwave modes towards setups for propagating quantum microwaves has triggered the need for low-loss superconducting microwave beam splitters. Such a device should have ports compatible with the coplanar geometry relevant for circuit QED and, at the same time, be compact allowing for scalability. This combination presents fundamental and technological challenges. In this work, we present the fabrication and characterization of various compact superconducting coplanar microwave beam splitters. In addition, we discuss efforts towards a tunable beam splitter.

  20. Intelligent compaction theory of high roller compacted concrete dam

    Institute of Scientific and Technical Information of China (English)

    Liu Donghai

    2012-01-01

    The concept and realization process of intelligent compaction for the construction of high roller compacted concrete dam were presented, as well as the theory of monitoring and intelligent feedback control. Based on the real-time analysis of the compaction index, a multiple regression model of the dam compactness was established and a realime estimation method of compaction quality for the entire work area of roller compacted concrete dam was proposed finally. The adaptive adjustment of the roiling process parameters was achieved, with the speed, the exciting force, the roller pass and the compaction thickness meeting the standards during the whole construction process. As a result, the compaction quality and construction efficiency can be improved. The research provides a new way for the construction quality control of roller compacted concrete dam.

  1. A titanium transition-edge sensor for the in-situ detection of individual He2 excimers in superfluid helium

    Science.gov (United States)

    Carter, Faustin; Hertel, Scott; Matulis, Catherine; Rooks, Michael; McKinsey, Daniel; Prober, Daniel

    2015-03-01

    Incident radiation can excite superfluid helium into a diatomic He2* excimer, which decays through the emission of a 15 eV photon. Such excimers have been used as tracers to measure the superfluid's quantum turbulence, thanks in part to the long half-life of the He2* triplet state (~ 13 seconds). However, the efficient detection of single or a few excimers remains a challenge. We present a detector capable of in-situ detection of the He2* excimers either directly (the excimer collides with the detector), or by collecting the 15 eV photon emission upon decay. This detector is based on a titanium superconducting transition-edge sensor (TES), with an energy resolution of 1.5 eV fwhm, coupled to an aluminum absorber. The TES is designed to operate from 20-300 mK in a dilution refrigerator. We will discuss operating characteristics of the detector and present preliminary data for detection of individual excimers. We acknowledge support from YINQE, NSF MRSEC DMR-1119826, and NSF DMR-1007974.

  2. Line broadening of excimers bound to the surface of 4He clusters investigated by comparison with corona discharge excitation spectra

    Science.gov (United States)

    Mendoza-Luna, Luis Guillermo; Watkins, Mark; von Haeften, Klaus; Bonifaci, Nelly; Aitken, Frederic

    2013-06-01

    A new method for assessing the site-specific emission from electronically excited helium droplets is presented. The fluorescence features of helium droplets show sharp rotationally resolved lines indicating desorption of excimers and emission far outside the droplets as well as blue-shifted and strongly broadened features due to emission of excimers confined in cavities within the droplets. A third feature is identified: slightly broadened rotational lines that we attribute to emission from excimers bound to the droplet surface. The line broadening arises from collisions with the helium gas within the surface layer of the helium droplets. These conditions are simulated using a high pressure gas cell in which helium gas is electronically excited using a corona discharge. Rotational line broadening of similar magnitude to that of large droplets (N ˜ 107 atoms) is observed for gas pressures at about 5 bar and 80 K, corresponding to a number density of 4.52 × 10-4 Å-3. We conclude that the excimers are located within a shell separated by 6 to 7 Å from the radius where the density has dropped to 50% of its centre value. Helium droplets that are smaller (N ˜ 104 atoms) exhibit rotational lines that are less broadened, which we attribute to the superposition of features originating from desorbed and from surface-bound excimers. A fit of the linewidths reveals that around 50% of the excimers are bound to the surface of the smaller droplets.

  3. Laser drilling of collagen. A medical technique application for the excimer laser. Laserbohren von Kollagen. Eine medizintechnische Anwendung fuer den Excimer-Laser

    Energy Technology Data Exchange (ETDEWEB)

    Dickmann, K. (Laser Zentrum Hannover e.V. (Germany))

    1989-12-01

    For a special medical application in the field of clinic thrombocyte diagnosis drills in collagen - an extremely temperature sensitive organic material - are required without any thermal damage of the material. Thus processing of collagen based on mechanical drilling failed and furthermore also CO{sub 2}- and Nd:YAG-laser drilling was not practicable due to the thermal interaction mechanism of the infrared laser radiation with the material. However, drilling of collagen by the use of excimer laser radiation at {lambda} = 193 nm has shown a sharp-edged drill contour without any thermal damage of the material, as has been proved in recent medical tests. (orig.).

  4. 高效率放电抽运KrF准分子激光器%A Discharge-Pumped KrF Excimer Laser with High Efficiency

    Institute of Scientific and Technical Information of China (English)

    王效顺; 余吟山; 王庆胜; 梁勖; 游利兵; 方晓东

    2011-01-01

    248 nm discharge-pumped KrF excimer laser is importantly used in microelectronics and medicine. For most applications, maximal output efficiency and energy are very important parameters of a laser. A KrF excimer laser with high efficiency is developed. For obtaining the maximal output efficiency and energy and achieving the stationary discharge of the KrF excimer laser, a new switching power supply, compact electrodes the optimization of storage/discharge capacity, and gas mixture are used to develop a small-type high-efficency discharge-pumped KrF excimer laser. The effect of switching power supply on the charge/discharge characteristic and the effect of gas mixture on the output efficiency and energy of the laser are studied. Compared with the previous product, the property of the laser is improved considerably. The repetition rate of the laser is 1~80 Hz, the maximal efficiency is about 2.5% and the maximal output energy is up to 380 mJ. The pulse to pulse stability is about 1.8% with discharge voltage above 25 kV.%248 nm放电抽运KrF准分子激光器在微电子学和医学等领域有重要的应用价值.在大多数应用中,激光器的最大输出效率和能量都是十分重要的参数.为了提高激光器输出效率和能量,实现KrF准分子激光器的稳定放电,采用新型开关电源和结构紧凑的张氏电极,并通过优化储能/放电电容比例和工作气体配比等方法,研制出了一台小型高效率放电抽运KrF准分子激光器.研究了开关电源对充放电特性的影响,以及气体配比对激光输出效率和能量的影响.该激光器的各项参数相比以往的产品有了较大改善,可重复频率为1~80 Hz,输出效率最高达2.5%,最大单脉冲输出能量380 mJ;当工作电压高于25 kV时,激光输出能量不稳定度约为1.8%.

  5. Finite elements analysis of heteroepitaxial SiGe layers grown by excimer laser

    Science.gov (United States)

    Conde, J. C.; González, P.; Lusquiños, F.; Chiussi, S.; Serra, J.; León, B.

    2005-07-01

    In this work, the finite elements analysis using ANSYS ® (8.0) of the heteroepitaxial SiGe alloy formation induced by excimer lasers is presented. The numerical simulation of the temperature distribution induced by KrF excimer laser (energy densities 0.50 substrates is obtained. An acceptable agreement between the numerical simulations and the experimental results is found. The melting depth is also evaluated and the laser energy density threshold for the partial melting of the Si substrate is estimated. It allows us to determine the optimum conditions to achieve high quality epitaxy. For both the cases, the temperature profile versus time on the top of the Ge film and at the Ge/Si interface are obtained.

  6. Evolution of Ge and SiGe Quantum Dots under Excimer Laser Annealing

    Institute of Scientific and Technical Information of China (English)

    HAN Gen-Quan; ZENG Yu-Gang; YU Jin-Zhong; CHENG Bu-Wen; YANG Hai-Tao

    2008-01-01

    We present different relaxation mechanisms of Ge and SiGe quantum dots under excimer laser annealing.Inyestigation of the coarsening and relaxation of the dots showS that the strain in Ge dots on Ge films is relaxed by dislocation since there is no interface between the Ge dots and the Ge layer,while the SiGe dots on Si0.77 Ge0.23film relax by lattice distortion to coherent dots which results from the obvious interface between the SiGe dots and the Si0.77Ge0.23 film.The results are suggested and sustained by Vanderbilt and Wickham's theory,and also demonstrate that no bulk diffusion Occurs during the excimer laser annealing.

  7. Temporal fluctuations in excimer-like interactions between pi-conjugated chromophores

    CERN Document Server

    Stangl, Thomas; Schmitz, Daniela; Remmerssen, Klaas; Henzel, Sebastian; Hoeger, Sigurd; Vogelsang, Jan; Lupton, John M

    2015-01-01

    Inter- or intramolecular coupling processes between chromophores such as excimer formation or H- and J-aggregation are crucial to describing the photophysics of closely packed films of conjugated polymers. Such coupling is highly distance dependent, and should be sensitive to both fluctuations in the spacing between chromophores as well as the actual position on the chromophore where the exciton localizes. Single-molecule spectroscopy reveals these intrinsic fluctuations in well-defined bi-chromophoric model systems of cofacial oligomers. Signatures of interchromophoric interactions in the excited state - spectral red-shifting and broadening, and a slowing of photoluminescence decay - correlate with each other but scatter strongly between single molecules, implying an extraordinary distribution in coupling strengths. Furthermore, these excimer-like spectral fingerprints vary with time, revealing intrinsic dynamics in the coupling strength within one single dimer molecule, which constitutes the starting point ...

  8. Investigation of excimer laser ablation threshold of polymers using a microphone

    Energy Technology Data Exchange (ETDEWEB)

    Krueger, Joerg; Niino, Hiroyuki; Yabe, Akira

    2002-09-30

    KrF excimer laser ablation of polyethylene terephthalate (PET), polyimide (PI) and polycarbonate (PC) in air was studied by an in situ monitoring technique using a microphone. The microphone signal generated by a short acoustic pulse represented the etch rate of laser ablation depending on the laser fluence, i.e., the ablation 'strength'. From a linear relationship between the microphone output voltage and the laser fluence, the single-pulse ablation thresholds were found to be 30 mJ cm{sup -2} for PET, 37 mJ cm{sup -2} for PI and 51 mJ cm{sup -2} for PC (20-pulses threshold). The ablation thresholds of PET and PI were not influenced by the number of pulses per spot, while PC showed an incubation phenomenon. A microphone technique provides a simple method to determine the excimer laser ablation threshold of polymer films.

  9. Investigation of excimer laser ablation threshold of polymers using a microphone

    Science.gov (United States)

    Krüger, Jörg; Niino, Hiroyuki; Yabe, Akira

    2002-09-01

    KrF excimer laser ablation of polyethylene terephthalate (PET), polyimide (PI) and polycarbonate (PC) in air was studied by an in situ monitoring technique using a microphone. The microphone signal generated by a short acoustic pulse represented the etch rate of laser ablation depending on the laser fluence, i.e., the ablation "strength". From a linear relationship between the microphone output voltage and the laser fluence, the single-pulse ablation thresholds were found to be 30 mJ cm -2 for PET, 37 mJ cm -2 for PI and 51 mJ cm -2 for PC (20-pulses threshold). The ablation thresholds of PET and PI were not influenced by the number of pulses per spot, while PC showed an incubation phenomenon. A microphone technique provides a simple method to determine the excimer laser ablation threshold of polymer films.

  10. 172 nm excimer VUV-triggered photodegradation and micropatterning of aminosilane films

    Energy Technology Data Exchange (ETDEWEB)

    Elsner, Christian, E-mail: christian.elsner@iom-leipzig.d [Leibniz-Institut fuer Oberflaechenmodifizierung e. V. (IOM), Permoser Strasse 15, D-04318 Leipzig (Germany); Naumov, Sergej; Zajadacz, Joachim [Leibniz-Institut fuer Oberflaechenmodifizierung e. V. (IOM), Permoser Strasse 15, D-04318 Leipzig (Germany); Buchmeiser, Michael R., E-mail: michael.buchmeiser@iom-leipzig.d [Leibniz-Institut fuer Oberflaechenmodifizierung e. V. (IOM), Permoser Strasse 15, D-04318 Leipzig (Germany); Institut fuer Technische Chemie, Universitaet Leipzig, Linnestr. 3, D-04318 Leipzig (Germany)

    2009-10-30

    Emission from Xe{sub 2}* excimers exhibiting photon energies between 7 and 10 eV can be used to induce strong surface modification effects on polymeric materials in the top 100 nm layer. In order to identify suitable monomers for this VUV-based process, the photodegradation mechanism of different organosilanes of the general structure R-CH{sub 2}-Si(OCH{sub 3}){sub 3} was elucidated by quantum chemical calculations. Herein, the photodegradation of 3-aminopropyltrimethoxysilane films by the use of a 172 nm excimer lamp under different irradiation conditions is described and completed by micropatterning experiments. The presence of 1000-5000 ppm oxygen was found to promote the transformation process to an inorganic-like surface. The films obtained were analyzed by X-ray photoelectron spectroscopy, contact angle measurements and fluorescence microscopy after covalent attachment of a fluorescent dye to the remaining amino groups. Complementary, silver staining was used to visualize photopatterning.

  11. X-ray photoelectron spectroscopy study of excimer laser treated alumina films

    Science.gov (United States)

    Georgiev, D. G.; Kolev, K.; Laude, L. D.; Mednikarov, B.; Starbov, N.

    1998-01-01

    Amorphous alumina layers are deposited on a single crystal Si substrate by a e-gun evaporation technique. These films are then thermally annealed in oxygen to be crystallized and, further, irradiated with an excimer laser beam. At each stage of the film preparation, an x-ray photoelectron spectroscopy analysis is performed at the film surface and in depth, upon ion beam grinding. Results give evidence for the formation of an aluminosilicate upon thermal annealing of the film in oxygen. At the surface itself, this compound is observed to decompose upon excimer laser irradiation at energy densities exceeding 1.75 J/cm2, giving rise to free Si atoms and SiO2, however with complete disappearance of Al atoms. Model photochemical reactions are proposed to explain such transformations.

  12. Bound-bound transitions in the emission spectra of Ba$^{+}$--He excimer

    CERN Document Server

    Moroshkin, Peter

    2016-01-01

    We present an experimental and theoretical study of the emission and absorption spectra of the Ba$^{+}$ ions and Ba$^{+\\ast}$He excimer quasimolecules in the cryogenic Ba--He plasma. We observe several new spectral features in the emission spectrum which we assign to the electronic transitions between bound states of the excimer correlating to the 6$^{2}P_{3/2}$ and 5$^{2}D_{3/2,5/2}$ states of Ba$^{+}$. The resulting Ba$^{+}$(5$^{2}D_{J}$)He is a metastable electronically excited complex with orbital angular momentum $L$=2, thus expanding the family of known metal--helium quasimolecules. It might be suitable for high-resolution spectroscopic studies and for the search for new polyatomic exciplex structures.

  13. Selective irradiation of radicals for biomedical treatment using vacuum ultraviolet light from an excimer lamp

    Science.gov (United States)

    Ono, Ryo; Tokumitsu, Yusuke; Zen, Shungo; Yonemori, Seiya

    2014-10-01

    In plasma medicine, radicals are considered to play important roles. However, the medical effect of each radical, such as OH and O, is unknown. To examine the effect of each radical, selective production of radicals is needed. We developed selective production of radicals for biomedical treatment using a vacuum ultraviolet (VUV) light emitted from an excimer lamp. Selective irradiation of OH radicals can be achieved by irradiating the 172-nm VUV light from a Xe2 excimer lamp to a humid helium flow in a quartz tube. The water molecules are strongly photodissociated by the VUV light to produce OH radicals. A photochemical simulation for the selective OH production is developed to calculate the OH density. The calculated OH density is compared with OH density measured using laser-induced fluorescence (LIF). Selective production of other radicals than OH is also discussed.

  14. Bound-bound transitions in the emission spectra of Ba+-He excimer

    Science.gov (United States)

    Moroshkin, P.; Kono, K.

    2016-05-01

    We present an experimental and theoretical study of the emission and absorption spectra of the Ba+ ions and Ba+*He excimer quasimolecules in the cryogenic Ba-He plasma. We observe several spectral features in the emission spectrum, which we assign to the electronic transitions between bound states of the excimer correlating to the 6 2P3 /2 and 5 2D3 /2 ,5 /2 states of Ba+. The resulting Ba+(5 2DJ) He is a metastable electronically excited complex with orbital angular momentum L =2 , thus expanding the family of known metal-helium quasimolecules. It might be suitable for high-resolution spectroscopic studies and for the search for new polyatomic exciplex structures.

  15. Compact Microscope Imaging System Developed

    Science.gov (United States)

    McDowell, Mark

    2001-01-01

    The Compact Microscope Imaging System (CMIS) is a diagnostic tool with intelligent controls for use in space, industrial, medical, and security applications. The CMIS can be used in situ with a minimum amount of user intervention. This system, which was developed at the NASA Glenn Research Center, can scan, find areas of interest, focus, and acquire images automatically. Large numbers of multiple cell experiments require microscopy for in situ observations; this is only feasible with compact microscope systems. CMIS is a miniature machine vision system that combines intelligent image processing with remote control capabilities. The software also has a user-friendly interface that can be used independently of the hardware for post-experiment analysis. CMIS has potential commercial uses in the automated online inspection of precision parts, medical imaging, security industry (examination of currency in automated teller machines and fingerprint identification in secure entry locks), environmental industry (automated examination of soil/water samples), biomedical field (automated blood/cell analysis), and microscopy community. CMIS will improve research in several ways: It will expand the capabilities of MSD experiments utilizing microscope technology. It may be used in lunar and Martian experiments (Rover Robot). Because of its reduced size, it will enable experiments that were not feasible previously. It may be incorporated into existing shuttle orbiter and space station experiments, including glove-box-sized experiments as well as ground-based experiments.

  16. Cost-effective SU-8 micro-structures by DUV excimer laser lithography for label-free biosensing

    Science.gov (United States)

    Sanza, F. J.; Laguna, M. F.; Casquel, R.; Holgado, M.; Barrios, C. A.; Ortega, F. J.; López-Romero, D.; García-Ballesteros, J. J.; Bañuls, M. J.; Maquieira, A.; Puchades, R.

    2011-04-01

    Cost-effective SU-8 micro-structures on a silicon substrate were developed using 248 nm excimer laser KrF projection, studying the influence of the different variables on the final pattern geometry, finding out that the most critical are exposure dose and post-bake condition. Also a novel and cost effective type of photomask based on commercial polyimide Kapton produced by 355 nm DPSS laser microprocessing was developed, studying the influence of the cutting conditions on the photomask. Finally, as a likely application the biosensing capability with a standard BSA/antiBSA immunoassay over a 10 × 10 micro-plates square lattice of around 10 μm in diameter, 15 μm of spacing and 400 nm in height was demonstrated, finding a limit of detection (LOD) of 33.4 ng/ml which is in the order of magnitude of bioapplications such as detection of cortisol hormone or insulin-like growth factor. Low cost fabrication and vertical interrogation characterization techniques lead to a promising future in the biosensing technology field.

  17. A comparison of the characteristics of excimer and femtosecond laser ablation of acrylonitrile butadiene styrene (ABS)

    Science.gov (United States)

    See, Tian Long; Liu, Zhu; Li, Lin; Zhong, Xiang Li

    2016-02-01

    This paper presents an investigation on the ablation characteristics of excimer laser (λ = 248 nm, τ = 15 ns) and femtosecond laser (λ = 800 nm, τ = 100 fs) on ABS polymer sheets. The laser-material interaction parameters (ablation threshold, optical penetration depth and incubation factor) and the changes in material chemical properties were evaluated and compared between the two lasers. The work shows that the ablation threshold and effective optical penetration depth values are dependent on the wavelength of laser beam (photon energy) and the pulse width. The ablation threshold value is lower for the excimer laser ablation of ABS (Fth = 0.087 J/cm2) than that for the femtosecond laser ablation of ABS (Fth = 1.576 J/cm2), demonstrating a more dominating role of laser wavelength than the pulse width in influencing the ablation threshold. The ablation depth versus the logarithmic scale of laser fluence shows two linear regions for the fs laser ablation, not previously known for polymers. The effective optical penetration depth value is lower for excimer laser ablation (α-1 = 223 nm) than that for femtosecond laser ablation (α-1 = 2917 nm). The ablation threshold decreases with increasing number of pulses (NOP) due to the chain scission process that shortens the polymeric chains, resulting in a weaker polymeric configuration and the dependency is governed by the incubation factor. Excimer laser treatment of ABS eliminates the Cdbnd C bond completely through the chain scission process whereas Cdbnd C bond is partially eliminated through the femtosecond laser treatment due to the difference in photon energy of the two laser beams. A reduction in the Cdbnd C bond through the chain scission process creates free radical carbons which then form crosslinks with each other or react with oxygen, nitrogen and water in air producing oxygen-rich (Csbnd O and Cdbnd O bond) and nitrogen-rich (Csbnd N) functional groups.

  18. Current-Mode Power Converter for Radiation Control in DBD Excimer Lamps

    OpenAIRE

    2012-01-01

    A pulsed current-mode converter specifically designed for the supply of dielectric barrier discharge excimer lamps is proposed in this paper. The power supply structure is defined on the basis of causality criteria that are justified by the structure of the lamp model. The converter operation is studied, and its design criteria are established using state-plane analysis. This converter, operating in discontinuous conduction mode, controls directly both the amplitude and the duration of the em...

  19. Physical and optical limitations using ArF-excimer and Er:YAG lasers for PRK

    Science.gov (United States)

    Semchishen, Vladimir A.; Mrochen, Michael; Seiler, Theo

    1998-06-01

    The Erbium:YAG laser emitting at a wavelength of 2,94 micrometer have been promised as an alternative laser for the ArF-excimer laser (193 nm) in photorefractive keratectomy (PRK). This report discusses the limitations of laser parameters such as wavelength, energy density and pulse duration for the ablation of the cornea. In addition, the melting process during ablation on the corneal surface roughness may play a role.

  20. Intra-individual variability of penetrating keratoplasty outcome after excimer laser versus motorized corneal trephination.

    Science.gov (United States)

    Szentmáry, Nóra; Langenbucher, Achim; Naumann, Gottfried O H; Seitz, Berthold

    2006-10-01

    To assess the intra-individual variability of outcomes after penetrating keratoplasty by comparing mechanical and nonmechanical corneal trephination. Fifteen patients (30 eyes, 16 with keratoconus and 14 with Fuchs' dystrophy; median age at penetrating keratoplasty 56.3/53.5 years) were assessed whose trephination was performed using a motor trephine in one eye and the 193-nm excimer laser (MEL 60, Carl Zeiss-Meditec) in the other eye by one experienced surgeon. Subjective refractometry, standard keratometry, and corneal topography were used to assess best spectacle-corrected visual acuity (BSCVA); spherical equivalent refraction; keratometric and topographic central corneal power; refractive, keratometric, and topographic astigmatism; surface regularity index; surface asymmetry index; and potential visual acuity preoperatively, before first suture removal (at 1 year), and at last available follow-up after final suture removal but before additional surgery (1.3 and 1.9 years, respectively). Before first suture removal BSCVA was significantly higher (0.7 vs 0.5; P=.008) after excimer laser trephination. At the end of follow-up, refractive/ keratometric/topographic astigmatism (2.20/2.10/2.40 diopters [D] vs 5.00/6.00/7.10 D) and surface regularity index (0.8 vs 1.1) were significantly lower (P=.02, P=.005, P=.01, and P=.03, respectively) and potential visual acuity was significantly higher (0.9/0.6; P=.02) after excimer laser trephination. During long-term follow-up, all-sutures-out postkeratoplasty astigmatism and surface regularity are superior in the eye where nonmechanical excimer laser was applied in contrast to the fellow eye with motor trephination in the same individual.

  1. Theoretical and experimental determination of the lowest excited states of the Kr*2 excimer

    Science.gov (United States)

    Gadea, F. X.; Spiegelmann, F.; Castex, M. C.; Morlais, M.

    1983-06-01

    The potential energy curves of the Kr*2 excimer dissociating into Kr (4s24p6 1S0)+Kr*(4s24p55s) are determined (i) theoretically from ab initio CI calculation and semiempirical SO coupling and (ii) experimentally from the temperature dependence of absorption profiles. The results are carefully examined with the help of theoretical simulation of line profiles using semiclassical or quantal models.

  2. High Efficiency Mask Based Laser Materials Processing with TEA-CO2 - and Excimer Laser

    DEFF Research Database (Denmark)

    Bastue, Jens; Olsen, Flemmming Ove

    1997-01-01

    In general, mask based laser materials processing techniques suffer from a very low energy efficiency. We have developed a simple device called an energy enhancer, which is capable of increasing the energy efficiency of typical mask based laser materials processing systems. A short review...... line marking with TEA-CO2 laser of high speed canning lines. The second one is manufactured for marking or microdrilling with excimer laser....

  3. Limestone compaction: an enigma

    Science.gov (United States)

    Shinn, Eugene A.; Halley, Robert B.; Hudson, J. Harold; Lidz, Barbara H.

    1977-01-01

    Compression of an undisturbed carbonate sediment core under a pressure of 556 kg/cm2 produced a “rock” with sedimentary structures similar to typical ancient fine-grained limestones. Surprisingly, shells, foraminifera, and other fossils were not noticeably crushed, which indicates that absence of crushed fossils in ancient limestones can no longer be considered evidence that limestones do not compact.

  4. Compact rotating cup anemometer

    Science.gov (United States)

    Wellman, J. B.

    1968-01-01

    Compact, collapsible rotating cup anemometer is used in remote locations where portability and durability are factors in the choice of equipment. This lightweight instrument has a low wind-velocity threshold, is capable of withstanding large mechanical shocks while in its stowed configuration, and has fast response to wind fluctuations.

  5. Improving the compaction properties of roller compacted calcium carbonate.

    Science.gov (United States)

    Bacher, C; Olsen, P M; Bertelsen, P; Kristensen, J; Sonnergaard, J M

    2007-09-05

    The effects of roller compaction process parameters, morphological forms of calcium carbonate and particle size of sorbitol on flow, compaction and compression properties were investigated. The morphology of the calcium carbonate and the sorbitol particle size were more influential on the compaction properties than the settings of the roller compactor. The roller compaction process was demonstrated to be robust and stable in regard to flowability and compactibility. The flowability of the granules was improved adequately to facilitate compression in a production scale rotary tablet press. By adding sorbitol to the calcium carbonate, the compressibility - characterized by the Walker coefficient W(ID) - and the compactibility C(P) were improved considerably. A correlation between the consolidation characteristics was demonstrated. Compactibility data from the compaction simulator correlated with the tablet press for two of the calcium carbonates, the cubic form and the ground quality.

  6. Total spectral radiant flux measurements on Xe excimer lamps from 115 nm to 1000 nm

    Science.gov (United States)

    Trampert, Klaus E.; Paravia, Mark; Daub, Rüdiger; Heering, Wolfgang

    2007-06-01

    Xe excimer lamps are used as VUV source for industrial application like surface cleaning. To determine the VUV efficiency of the lamp the radiant flux need to be known. Due to the difficulties of VUV measurements, it is often determined by interpolation from a value of a fixed angle, which results in large uncertainties. Here a goniometric setup is presented to measure the radiant flux of VUV sources like Xe excimer lamps which emit a narrow spectral band in the VUV range between λ = 147 nm and 200 nm with a peak at 172 nm and spectral lines in NIR. By the use of two monochromators, we measure the spectral resolved radiant flux from 120 nm to 1000 nm. The measurement uncertainty of 9.7 % is rather low for the VUV spectral range and depends mainly on the uncertainty of the used deuterium calibration standard from PTB (7%). Due to the strong temperature dependence of the transmission edge of silica used for the lamp vessel, the measurements are done in nitrogen atmosphere to ensure the convection cooling of the lamp. We measured the radiance distribution curve and radiant flux of Xe excimer lamps and could show the angle dependence of the spectrum. The measured correlation between the VUV band and the NIR lines gives us a better understanding of the plasma kinetics, which is used to optimize the pulsed excitation of the lamp.

  7. Excimer laser phototherapeutic keratectomy : Indications, results and its role in the Indian scenario

    Directory of Open Access Journals (Sweden)

    Rao Srinivas

    1999-01-01

    Full Text Available PURPOSE: To report indications, technique, and results of excimer phototherapeutic keratectomy (PTK, and describe possible reasons for the small numbers of such procedures performed in a referral institute in India. METHODS: Retrospective review of case records of 10 patients (11 eyes who underwent excimer PTK at our institute between February 1994 and September 1997. RESULTS: Corneal scars were the most common indication for treatment. Best-corrected visual acuity (BCVA improved in 6 eyes (mean: 2 lines of Snellen acuity. All eyes had BCVA > or = 6/12 after treatment. None of the patients experienced loss of BCVA after treatment. Unaided visual acuity improved in 3 eyes and decreased in 2 eyes. Change in spherical equivalent refraction > or = 1 diopter occurred in 77.8% of eyes after treatment. Treating central corneal scars resulted in a significant hyperopic shift in refraction. CONCLUSIONS: Excimer PTK is a safe and effective procedure for the treatment of superficial corneal opacities. Post-treatment ametropia may require further correction with optical aids. Inappropriate referrals, deep corneal scars, and cost of the procedure could have contributed to the small numbers of PTK performed at our institute. Improved understanding of procedural strengths and limitations could lead to increased use of this procedure, with satisfying results in selected patients.

  8. Application of optical tweezers and excimer laser to study protoplast fusion

    Science.gov (United States)

    Kantawang, Titirat; Samipak, Sompid; Limtrakul, Jumras; Chattham, Nattaporn

    2015-07-01

    Protoplast fusion is a physical phenomenon that two protoplasts come in contact and fuse together. Doing so, it is possible to combine specific genes from one protoplast to another during fusion such as drought resistance and disease resistance. There are a few possible methods to induce protoplast fusion, for example, electrofusion and chemical fusion. In this study, chemical fusion was performed with laser applied as an external force to enhance rate of fusion and observed under a microscope. Optical tweezers (1064 nm with 100X objective N.A. 1.3) and excimer laser (308 nm LMU-40X-UVB objective) were set with a Nikon Ti-U inverted microscope. Samples were prepared by soaking in hypertonic solution in order to induce cell plasmolysis. Elodea Canadensis and Allium cepa plasmolysed leaves were cut and observed under microscope. Concentration of solution was varied to induce difference turgor pressures on protoplasts pushing at cell wall. Free protoplasts in solution were trapped by optical tweezers to study the effect of Polyethylene glycol (PEG) solution. PEG was diluted by Ca+ solution during the process to induced protoplast cell contact and fusion. Possibility of protoplast fusion by excimer laser was investigated and found possible. Here we report a novel tool for plant cell fusion using excimer laser. Plant growth after cell fusion is currently conducted.

  9. Endothelial reaction to perforating and non-perforating excimer laser excisions in rabbits

    Energy Technology Data Exchange (ETDEWEB)

    Koch, J.W.; Lang, G.K.; Naumann, G.O. (Department of Ophthalmology, University Erlangen-Nuernberg (Germany))

    1991-05-01

    With an ArF excimer laser (193 nm, 750 mJ/cm2, 20 Hz) and a special slit-mask system, perforating and non-perforating linear keratectomies were performed in 55 rabbit corneas with a follow-up from 1 hour to 6 months. Varying the pulse number according to ablation rate (0.8 micron/pulse) and corneal thickness, four linear radial excisions (3 mm length, 70 microns width) of increasing depth (70%, 80%, 90%, 100% perforation) were produced. The corneas were processed for light microscopy, scanning and transmission electron microscopy, and vital staining of the endothelium. Except for mild cell contact alterations and discrete single cell damage in the 90% deep excisions, no endothelial damage could be detected after non-perforating keratectomies. Minute (less than 20 microns) and small (20 to 100 microns maximal diameter) perforations induced cell enlargement, formation of pseudopodia, rosette-like figures, multi-nucleated giant cells, and ultimately uniform reformation of the cell pattern (1 hour to 7 days postoperatively). Larger excimer laser defects of Descemet's membrane (greater than 100 microns) were overgrown by dedifferentiated endothelial cells producing a new PAS-positive basement membrane. Vital staining revealed the complete and stable reorganization of the endothelium over these lesions within 6 months. The authors observations are similar to those reported on the endothelial repair process following other surgical manipulations (knife incisions, direct Nd:YAG-laser trauma) and support the applicability of excimer lasers for corneal trephination in patients.

  10. Efficacy of 308-nm xenon chloride excimer laser in pityriasis alba.

    Science.gov (United States)

    Al-Mutairi, Nawaf; Hadad, Ahmed Al

    2012-04-01

    Pityriasis alba (PA) is the most common cause of facial hypopigmentation presenting to the dermatologist. The objective of the current study was to study the effect of the 308-nm excimer laser in the treatment of PA. Twelve patients with 37 PA patches were enrolled in this study. The lesions were treated using the 308-nm excimer laser twice a week for 12 weeks. The hypopigmented areas were evaluated at baseline and at weeks 0, 3, 6, and 12 for scaling, hypopigmentation, and pruritus on a 4-point scale (0 = none to 3 = severe). All adverse effects were recorded. There were seven male and five female participants in (aged 5-21 years), with skin type III to V. After 1 month of laser therapy, the clinical scores were significantly lower than at baseline. Similar decreases were observed for the scaling and pruritus scores. Uneven skin color improved by the third week, and near-complete resolution was noticed by the end of 3 months. No serious or unpleasant side-effects were observed, and all patients completed the 12-week treatment. Patients were satisfied or very satisfied with the treatment. The 308-nm excimer laser is an effective therapeutic option for PA. © 2011 by the American Society for Dermatologic Surgery, Inc. Published by Wiley Periodicals, Inc.

  11. Excimer laser surface modification of coated steel for enhancement of adhesive bonding

    Science.gov (United States)

    Jahani, Hamid R.; Moffat, B.; Mueller, R. E.; Fumo, D.; Duley, W.; North, T.; Gu, Bo

    1998-05-01

    Zinc coated sheet steel in the form of temper rolled galvanize and galvanneal are used extensively in the automotive industry. Through a process of excimer laser surface treatment, we have developed a procedure to significantly enhance the adhesion characteristics of these coated steels. We report here results of processing trials using both XeCl (308 nm) and KrF (248 nm) excimer lasers and a two-part epoxy adhesive (3M DP-460) with a range of processing conditions. Bond strengths are measured by T-peel and shear test methods. Using T-peel tests, bond strength improvements greater than five times than for untreated surfaces have been observed. With the improved surface condition, the bond strength becomes limited by the cohesive strength of the adhesive. Detailed measurements of the physical structure and chemical composition of the excimer laser processed surfaces are presented. The enhancement in bond strength is correlated with the observed changes in physical and chemical structure of the laser processed surfaces. Surface structure is observed using SEM and physical characteristics are quantified using a Talysurf profilometer. The chemical composition of the treated surface has been analysed using XPS and time-of-flight mass spectroscopy.

  12. On couplings and excimers: lessons from studies of singlet fission in covalently linked tetracene dimers.

    Science.gov (United States)

    Feng, Xintian; Krylov, Anna I

    2016-03-21

    Electronic factors controlling singlet fission (SF) rates are investigated in covalently linked dimers of tetracene. Using covalent linkers, relative orientation of the individual chromophores can be controlled, maximizing the rates of SF. Structures with coplanar and staggered arrangements of tetracene moieties are considered. The electronic structure calculations and three-state kinetic model for SF rates provide explanations for experimentally observed low SF yields in coplanar dimers and efficient SF in staggered dimers. The calculations illuminate the role of the excimer formation in SF process. The structural relaxation in the S1 state leads to the increased rate of the multi-exciton (ME) state formation, but impedes the second step, separation of the ME state into independent triplets. The slower second step reduces SF yield by allowing other processes, such as radiationless relaxation, to compete with triplet generation. The calculations of electronic couplings also suggest an increased rate of radiationless relaxation at the excimer geometries. Thus, the excimer serves as a trap of the ME state. The effect of covalent linkers on the electronic factors and SF rates is investigated. In all considered structures, the presence of the linker leads to larger couplings, however, the effect on the overall rate is less straightforward, since the linkers generally result in less favorable energetics. This complex behavior once again illustrates the importance of integrative approaches that evaluate the overall rate, rather than focusing on specific electronic factors such as energies or couplings.

  13. Excimer ultraviolet sources for thin film deposition: a 15 year perspective

    Science.gov (United States)

    Boyd, Ian W.; Liaw, Irving I.

    2010-02-01

    High intensity intensity ultraviolet (UV) and vacuum ultraviolet (VUV) radiation provide a singular dominant narrow-band emission at various wavelengths(λ) between 108 - 351 nm. The use of dielectric-barrier discharges in its embodiment of an excimer lamp as a photon-source provides a novel method to induce surface modification. From its in relatively humble beginnings in ozone generation, the excimer lamp has found new applications in the field of low-temperature processing of surfaces. Herein, a 15 year perspective of work done at the Materials & Devices Group at University College London between 1992 and 2007 is presented. The excimer lamps' application to the modification of surfaces for materials processing include: photo-induced formation of high-κ dielectric thin films and more recently the UV-induced photo-doping of silicon substrates, amongst others. With its robust yet inexpensive setup and flexibility of geometric configurations, they are easily coupled in parallel resulting in the provision of high photon fluxes over large areas. These sources also have an incoherent and almost monochromatic selectivity for application to process chemical pathway specific tasks by simple variation of the discharge gas mixture. These sources are an interesting addition to and an alternative to lasers for scalable industrial applications and have potential for a myriad of applications across different fields.

  14. Optimal Zone Boundaries for Two-class-based Compact 3D AS/RS

    NARCIS (Netherlands)

    Y. Yu (Yugang); M.B.M. de Koster (René)

    2007-01-01

    textabstractCompact, multi-deep (3D), Automated Storage and Retrieval Systems (AS/RS) are becoming more common, due to new technologies, lower investment costs, time efficiency and compact size. Decision-making research on these systems is still in its infancy. We study a particular compact system w

  15. The effectiveness of excimer laser on vitiligo treatment in comparison with a combination therapy of Excimer laser and tacrolimus in an Iranian population.

    Science.gov (United States)

    Matin, Marzieh; Latifi, Sahar; Zoufan, Nasrin; Koushki, Davood; Mirjafari Daryasari, Seyedeh Adeleh; Rahdari, Fereshteh

    2014-10-01

    Usage of 308-nm excimer laser (EL) is an effective treatment in vitiligo. As genetic predispositions along with type of skin and rate of sun exposure are known factors influencing the treatment outcomes, we tried to evaluate the treatment results of using 308 nm-excimer laser alone in comparison with the combined therapy of EL and topical tacrolimus in Iranian patients with vitiligo. We reviewed the medical files of 150 patients with vitiligo who were referred to the Behsima Laser Center between April 2012 and April 2013. Seventy five patients who received combined therapy of 308 nm EL and topical tacrolimus three times a week entered the study. Seventy-five controls with matched characteristics and who received only EL were also selected. The amount of repigmentation was estimated by an expert dermatologist and was classified in 5 ranks. In the case group, 33.3% (n: 25) showed 50-75% repigmentaion and 49.3% (n:37) had more than 75% response to therapy, whereas among the patients in the control group 29.3% (n: 22) showed no repigmentation and only 8% (n: 6) demonstrated more than 75% repigmentation response. The higher efficiency of the combination therapy on repigmentation was statistically significant (P: 0.006). Our study shows that Iranian patients with vitiligo who received a combined treatment course with 308-nm EL and tacrolimus 0.1% experienced significantly higher levels of repigmentation in comparison with laser therapy alone.

  16. Molecule-binding dependent assembly of split aptamer and γ-cyclodextrin: A sensitive excimer signaling approach for aptamer biosensors

    Energy Technology Data Exchange (ETDEWEB)

    Jin, Fen [State Key Laboratory of Chemo/Biosensing and Chemometrics, College of Chemistry and Chemical Engineering, Hunan University, Changsha 410082 (China); Hubei Key Laboratory of Mine Environmental Pollution Control and Remediation, Environmental Science and Engineering College, Hubei Polytechnic University, Huangshi 435003 (China); Lian, Yan; Li, Jishan; Zheng, Jing; Hu, Yaping; Liu, Jinhua; Huang, Jin [State Key Laboratory of Chemo/Biosensing and Chemometrics, College of Chemistry and Chemical Engineering, Hunan University, Changsha 410082 (China); Yang, Ronghua, E-mail: Yangrh@pku.edu.cn [State Key Laboratory of Chemo/Biosensing and Chemometrics, College of Chemistry and Chemical Engineering, Hunan University, Changsha 410082 (China)

    2013-10-17

    Graphical abstract: Adenosine-binding aptamer was splitted into two fragments P2 and P3 which labeled pyrene molecules, mainly produce monomer signal. γ-CD cavity brings P2 and P3 in close proximity, allowing for weak excimer emission. In the presence of target, P2 and P3 are expected to bind ATP and form an aptamer/target complex, leads to large increase of the pyrene excimer fluorescence. -- Highlights: •We assembled split aptamer and γ-cyclodextrin fluorescence biosensors for ATP detection. •The biosensor increased quantum yield and emission lifetime of the excimer. •Time-resolved fluorescence is effective for ATP assay in complicated environment. -- Abstract: A highly sensitive and selective fluorescence aptamer biosensors for the determination of adenosine triphosphate (ATP) was developed. Binding of a target with splitting aptamers labeled with pyrene molecules form stable pyrene dimer in the γ-cyclodextrin (γ-CD) cavity, yielding a strong excimer emission. We have found that inclusion of pyrene dimer in γ-cyclodextrin cavity not only exhibits additive increases in quantum yield and emission lifetime of the excimer, but also facilitates target-induced fusion of the splitting aptamers to form the aptamer/target complex. As proof-of-principle, the approach was applied to fluorescence detection of adenosine triphosphate. With an anti-ATP aptamer, the approach exhibits excimer fluorescence response toward ATP with a maximum signal-to-background ratio of 32.1 and remarkably low detection limit of 80 nM ATP in buffer solution. Moreover, due to the additive fluorescence lifetime of excimer induced by γ-cyclodextrin, time-resolved measurements could be conveniently used to detect as low as 0.5 μM ATP in blood serum quantitatively.

  17. Comparative study of excimer and erbium:YAG lasers for ablation of structural components of the knee

    Science.gov (United States)

    Vari, Sandor G.; Shi, Wei-Qiang; van der Veen, Maurits J.; Fishbein, Michael C.; Miller, J. M.; Papaioannou, Thanassis; Grundfest, Warren S.

    1991-05-01

    This study was designed to compare the efficiency and thermal effect of a 135 ns pulsed-stretched XeCl excimer laser (308 nm) and a free-running Erbium:YAG laser (2940 nm) with 200 microsecond(s) pulse duration for ablation of knee joint structures (hyaline and fibrous cartilage, tendon and bone). The radiant exposure used for tissue ablation ranged from 2 to 15 J/cm2 for the XeCl excimer and from 33 to 120 J/cm2 for Er:YAG. The excimer and Er:YAG lasers were operated at 4 and 5 Hz respectively. The ablative laser energy was delivered to tissue through fibers. Ablation rates of soft tissues (hyaline and fibrous cartilage, tendon) varied from 8.5 to 203 micrometers /pulse for excimer and from 8.2 to 273 micrometers /pulse for Er:YAG lasers. Ablation rates of soft tissues are linearly dependent on the radiant exposure. Within the range of parameters tested all the tissues except the bone could be rapidly ablated by both lasers. Bone ablation was much less efficient, requiring 15 J/cm2 and 110 J/cm2 radiant exposure for excimer and Er:YAG lasers to ablate 9.5 and 8.2 micrometers tissue per pulse. However, excimer laser ablation produced less thermal damage in the tissues studied compared to Er:YAG at the same laser parameters. The authors conclude that both lasers are capable of efficient knee joint tissue ablation. XeCl excimer laser requires an order of magnitude less energy than Er:YAG laser for comparable tissue ablation.

  18. Progress in Compact Toroid Experiments

    Energy Technology Data Exchange (ETDEWEB)

    Dolan, Thomas James

    2002-09-01

    The term "compact toroids" as used here means spherical tokamaks, spheromaks, and field reversed configurations, but not reversed field pinches. There are about 17 compact toroid experiments under construction or operating, with approximate parameters listed in Table 1.

  19. The United Nations Global Compact

    DEFF Research Database (Denmark)

    Rasche, Andreas; Waddock, Sandra; McIntosh, Malcolm

    2013-01-01

    This article reviews the interdisciplinary literature on the UN Global Compact. The review identifies three research perspectives, which scholars have used to study the UN Global Compact so far: a historical perspective discussing the Global Compact in the context of UN-business relations...

  20. Compact Spreader Schemes

    Energy Technology Data Exchange (ETDEWEB)

    Placidi, M.; Jung, J. -Y.; Ratti, A.; Sun, C.

    2014-07-25

    This paper describes beam distribution schemes adopting a novel implementation based on low amplitude vertical deflections combined with horizontal ones generated by Lambertson-type septum magnets. This scheme offers substantial compactness in the longitudinal layouts of the beam lines and increased flexibility for beam delivery of multiple beam lines on a shot-to-shot basis. Fast kickers (FK) or transverse electric field RF Deflectors (RFD) provide the low amplitude deflections. Initially proposed at the Stanford Linear Accelerator Center (SLAC) as tools for beam diagnostics and more recently adopted for multiline beam pattern schemes, RFDs offer repetition capabilities and a likely better amplitude reproducibility when compared to FKs, which, in turn, offer more modest financial involvements both in construction and operation. Both solutions represent an ideal approach for the design of compact beam distribution systems resulting in space and cost savings while preserving flexibility and beam quality.

  1. Compact fiber optic accelerometer

    Institute of Scientific and Technical Information of China (English)

    Feng Peng; Jun Yang; Bing Wu; Yonggui Yuan; Xingliang Li; Ai Zhou; Libo Yuan

    2012-01-01

    A compact fiber optic accelerometer based on a Michelson interferometer is proposed and demonstrated.In the proposed system,the sensing element consists of two single-mode fibers glued together by epoxy,which then act as a simple supported beam.By demodulating the optical phase shift,the acceleration is determined as proportional to the force applied on the central position of the two single-mode fibers.This simple model is able to calculate the sensitivity and the resonant frequency of the compact accelerometer.The experimental results show that the sensitivity and the resonant frequency of the accelerometer are 0.42 rad/g and 600 Hz,respectively.

  2. Surgical removal of infected pacemaker leads without cardiopulmonary bypass after failed extraction using the Excimer Laser Sheath Extraction System.

    Science.gov (United States)

    Tokunaga, Chiho; Enomoto, Yoshiharu; Sato, Fujio; Kanemoto, Shinya; Matsushita, Shonosuke; Hiramatsu, Yuji; Aonuma, Kazutaka; Sakakibara, Yuzuru

    2012-03-01

    With the growing number of cardiac pacemakers and internal cardioverter defibrillator implantations, problems with endocardial lead infection have been increasing. The newly developed Excimer Laser Sheath Lead Extraction System has been recognized as being highly useful for removing chronic infected leads. However, serious bleeding complications are a concern when this system is used. Here we report our experience with a 67-year-old man who was diagnosed with pacemaker endocarditis. Initially, lead removal was attempted using the Excimer Laser Sheath Extraction System, though this was abandoned because of severe adhesion of the leads and the junction of the supra vena cava (SVC) with the right atrium. Surgical removal of the leads was performed without using cardiopulmonary bypass and the leads were removed without any complications. During surgery, we found there was a silent perforation of the innominate vein brought about by the Excimer Laser Sheath System. Also, the junction of the SVC with the right atrium was thought to be an area potentially at high risk of perforation, because of a lack of surrounding tissue. It is our opinion that those who carry out procedures with the Excimer Laser Sheath System should understand the potential risk of perforation based on cardiac anatomy and should be prepared for lethal bleeding complications. Also, for emergent situations, we believe that close backup by a cardiovascular surgical team should be considered essential for performing the Excimer Laser Sheath Lead Extraction safely.

  3. Compact High Efficiency Adsorption Heat Pump

    OpenAIRE

    TeGrotenhuis, Ward E; Humble, Paul H; Sweeney, Josh B

    2012-01-01

    An innovative adsorption cycle heat pump technology is presented that is compact and capable of achieving high energy efficiency for integrated space heating, air conditioning, and water heating. High energy efficiency is accomplished by effectively recuperating heat within the system to minimize energy consumption. This substantially reduces the thermodynamic losses that occur when the sorbent beds are thermally cycled without effective heat recuperation. Furthermore, equipment cost is reduc...

  4. Foundation Treatment Construction Technology of Landfill by Super Down Hole Dynamic Compaction Pile Combined with Bored Pile%SDDC桩结合灌注桩的垃圾填埋场地基处理施工技术∗

    Institute of Scientific and Technical Information of China (English)

    毛正君; 陶志怀; 魏荣誉; 韩小明

    2016-01-01

    由于垃圾填埋场地具有性质复杂、厚度变化大、强度较低、压缩系数大、腐蚀性和污染性强等特点,在服务期内和封顶后都会产生大幅度的沉降。结合西安某垃圾填埋场实例,探讨了孔内深层超强夯桩( SDDC桩)结合灌注桩在垃圾填埋场地基处理中的施工技术。实践证明,采用该技术在满足地基承载力的基础上,降低了工程造价、提高了工程质量,取得了良好的社会经济效益。%Due to some characteristics of the landfill such as the complex properties, big change in thickness, low strength, large compressibility, strong corrosion resistance and polluting, it will generate settlement by a large margin during the service period and after capping. This paper cites an example of a landfill site in Xi’ an, probing into the foundation treatment construction technology of landfill by super down hole dynamic compaction pile combined with bored pile. It has been proved in practice that using this technique can meet the bearing capacity of foundation soil, at the same time, it also can reduce the engineering cost, improve the engineering quality and achieve good social and economic benefits.

  5. 汉阳河特大桥自密实微膨胀混凝土的制备及其施工工艺%Preparation and Construction Technology of Self-compacting Expansive Concrete for Hanyang River Bridge

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    This paper prepared the C50 self compacting and micro expansional concrete by using P·O 42.5 cement, high-performance expansive agent,local raw aggregate and adding fly ash II,silica fume mineral admixtures.It was suc-cessfully applied into the construction of Hanyang River steel tube arch bridge in Wufeng County,Yichang City.The engineering application showed that:the concrete with proposed construction mixture proportion met the standard and construct requirements;the appropriate amount of expansive agent compensated the shrinkage degree of concrete;the viscosity and fluidity of the concrete was significantly improved by adding tackifier constituents and air entraining com-ponents in admixture.The construction was carried out successfully with lift pumping construction technology.%以Ⅱ级粉煤灰和硅灰作为矿物掺和料,利用当地砂石原材料、P·O 42.5水泥和 HCSA 高性能膨胀剂,制备出了 C50自密实补偿收缩混凝土,并应用于宜昌五峰汉阳河特大桥钢管拱桥中。工程应用表明:制备出的混凝土满足标准和施工要求,适当掺量的膨胀剂可以补偿混凝土收缩,外加剂中增粘组分及引气组分可明显提升混凝土的黏聚性和流动性,通过采用泵送顶升现场施工工艺成功对宜昌五峰汉阳河特大桥进行了施工。

  6. Hydraulic conductivity of compacted zeolites.

    Science.gov (United States)

    Oren, A Hakan; Ozdamar, Tuğçe

    2013-06-01

    Hydraulic conductivities of compacted zeolites were investigated as a function of compaction water content and zeolite particle size. Initially, the compaction characteristics of zeolites were determined. The compaction test results showed that maximum dry unit weight (γ(dmax)) of fine zeolite was greater than that of granular zeolites. The γ(dmax) of compacted zeolites was between 1.01 and 1.17 Mg m(-3) and optimum water content (w(opt)) was between 38% and 53%. Regardless of zeolite particle size, compacted zeolites had low γ(dmax) and high w(opt) when compared with compacted natural soils. Then, hydraulic conductivity tests were run on compacted zeolites. The hydraulic conductivity values were within the range of 2.0 × 10(-3) cm s(-1) to 1.1 × 10(-7) cm s(-1). Hydraulic conductivity of all compacted zeolites decreased almost 50 times as the water content increased. It is noteworthy that hydraulic conductivity of compacted zeolite was strongly dependent on the zeolite particle size. The hydraulic conductivity decreased almost three orders of magnitude up to 39% fine content; then, it remained almost unchanged beyond 39%. Only one report was found in the literature on the hydraulic conductivity of compacted zeolite, which is in agreement with the findings of this study.

  7. Compact Ceramic Microchannel Heat Exchangers

    Energy Technology Data Exchange (ETDEWEB)

    Lewinsohn, Charles [Ceramatec, Inc., Salt Lake City, UT (United States)

    2016-10-31

    The objective of the proposed work was to demonstrate the feasibility of a step change in power plant efficiency at a commercially viable cost, by obtaining performance data for prototype, compact, ceramic microchannel heat exchangers. By performing the tasks described in the initial proposal, all of the milestones were met. The work performed will advance the technology from Technology Readiness Level 3 (TRL 3) to Technology Readiness Level 4 (TRL 4) and validate the potential of using these heat exchangers for enabling high efficiency solid oxide fuel cell (SOFC) or high-temperature turbine-based power plants. The attached report will describe how this objective was met. In collaboration with The Colorado School of Mines (CSM), specifications were developed for a high temperature heat exchanger for three commercial microturbines. Microturbines were selected because they are a more mature commercial technology than SOFC, they are a low-volume and high-value target for market entry of high-temperature heat exchangers, and they are essentially scaled-down versions of turbines used in utility-scale power plants. Using these specifications, microchannel dimensions were selected to meet the performance requirements. Ceramic plates were fabricated with microchannels of these dimensions. The plates were tested at room temperature and elevated temperature. Plates were joined together to make modular, heat exchanger stacks that were tested at a variety of temperatures and flow rates. Although gas flow rates equivalent to those in microturbines could not be achieved in the laboratory environment, the results showed expected efficiencies, robust operation under significant temperature gradients at high temperature, and the ability to cycle the stacks. Details of the methods and results are presented in this final report.

  8. Improvement of Anti-TNF-α Antibody-Induced Palmoplantar Pustular Psoriasis Using a 308-nm Excimer Light

    Directory of Open Access Journals (Sweden)

    Natsuko Iga

    2012-11-01

    Full Text Available Anti-tumor necrosis factor (TNF-α antibody is utilized in the treatment of a variety of chronic inflammatory conditions, including psoriasis. However, it can induce paradoxical development and/or exacerbation of psoriasis in the course of anti-TNF-α antibody treatment, which is sometimes refractory to conventional treatments. Herein, we report a case of refractory palmoplantar pustular psoriasis induced by anti-TNF-α antibody treatment, which was improved by treatment with a 308-nm excimer light. The 308-nm excimer light has less long-term risks than narrow-band UVB. The 308-nm excimer light may be a good therapeutic option for refractory psoriatic skin lesions induced by anti-TNF-α antibody therapy because of localized side effects without systemic problems, short length of treatment and low cumulative dosages of UV light.

  9. Aluminum-coated hollow glass fibers for ArF-excimer laser light fabricated by metallorganic chemical-vapor deposition.

    Science.gov (United States)

    Matsuura, Y; Miyagi, M

    1999-04-20

    A hollow fiber composed of a glass capillary tube and a metal thin film upon the inside of the tube is proposed for the delivery of ArF-excimer laser light. From theoretical analysis, aluminum is chosen as the metal layer. A thin aluminum film is deposited by metallorganic chemical-vapor deposition, with dimethylethylamine alane employed as the source material. Measured loss spectra in vacuum-ultraviolet and ultraviolet regions and losses for ArF-excimer laser light show the low-loss property of the aluminum-coated fiber at the 193-nm wavelength of ArF-excimer laser light. The straight loss of the 1-m long, 1-mm-bore fiber is 1.0 dB.

  10. Compact LINAC for deuterons

    Energy Technology Data Exchange (ETDEWEB)

    Kurennoy, S S [Los Alamos National Laboratory; O' Hara, J F [Los Alamos National Laboratory; Rybarcyk, L J [Los Alamos National Laboratory

    2008-01-01

    We are developing a compact deuteron-beam accelerator up to the deuteron energy of a few MeV based on room-temperature inter-digital H-mode (IH) accelerating structures with the transverse beam focusing using permanent-magnet quadrupoles (PMQ). Combining electromagnetic 3-D modeling with beam dynamics simulations and thermal-stress analysis, we show that IHPMQ structures provide very efficient and practical accelerators for light-ion beams of considerable currents at the beam velocities around a few percent of the speed of light. IH-structures with PMQ focusing following a short RFQ can also be beneficial in the front end of ion linacs.

  11. Compact synchrotron light sources

    CERN Document Server

    Weihreter, Ernst

    1996-01-01

    This book covers a new niche in circular accelerator design, motivated by the promising industrial prospects of recent micromanufacturing methods - X-ray lithography, synchrotron radiation-based micromachining and microanalysis techniques. It describes the basic concepts and the essential challenges for the development of compact synchrotron radiation sources from an accelerator designer's point of view and gives an outline of the actual state of the art. The volume is intended as an introduction and as a reference for physicists, engineers and managers involved in this rapidly developing fiel

  12. Compact Q-balls

    CERN Document Server

    Bazeia, D; Marques, M A; Menezes, R; da Rocha, R

    2016-01-01

    In this work we deal with non-topological solutions of the Q-ball type in two space-time dimensions, in models described by a single complex scalar field that engenders global symmetry. The main novelty is the presence of stable Q-balls solutions that live in a compact interval of the real line and appear from a family of models controlled by two distinct parameters. We find analytical solutions and study their charge and energy, and show how to control the parameters to make the Q-balls classically and quantum mechanically stable.

  13. Surface 3D Micro Free Forms: Multifunctional Microstructured Mesoporous α-Alumina by in Situ Slip Casting Using Excimer Laser Ablated Polycarbonate Molds.

    Science.gov (United States)

    Rowthu, Sriharitha; Böhlen, Karl; Bowen, Paul; Hoffmann, Patrik

    2015-11-11

    Ceramic surface microstructuring is a rapidly growing field with a variety of applications in tribology, wetting, biology, and so on. However, there are limitations to large-area microstructuring and fabrication of three-dimensional (3D) micro free forms. Here, we present a route to obtain intricate surface structures through in situ slip casting using polydimethylsiloxane (PDMS) negative molds which are replicated from excimer laser ablated polycarbonate (PC) master molds. PC sheets are ablated with a nanosecond KrF (λ = 248 nm) excimer laser mask projection system to obtain micron-scale 3D surface features over a large area of up to 3 m(2). Complex surface structures that include 3D free forms such as 3D topography of Switzerland, shallow structures such as diffractive optical elements (60 nm step) and conical micropillars have been obtained. The samples are defect-free produced with thicknesses of up to 10 mm and 120 mm diameter. The drying process of the slip cast alumina slurry takes place as a one-dimensional process, through surface evaporation and water permeation through the PDMS membrane. This allows homogeneous one-dimensional shrinkage during the drying process, independent of the sample's lateral dimensions. A linear mass diffusion model has been proposed to predict and explain the drying process of these ceramic colloidal suspensions. The calculated drying time is linearly proportional to the height of the slurry and the thickness of the negatively structured PDMS and is validated by the experimental results. An experimentally observed optimum Sylgard PDMS thickness range of ∼400 μm to 1 mm has achieved the best quality microstructured green compacts. Further, the model predicts that the drying time is independent of the microstructured areas and was validated using experimental observations carried out with microstructured areas of 300 mm(2), 1200 mm(2), and 120 cm(2). Therefore, in principle, the structures can be further replicated in areas up

  14. Double discharges in unipolar-pulsed dielectric barrier discharge xenon excimer lamps

    Science.gov (United States)

    Liu, Shuhai; Neiger, Manfred

    2003-07-01

    Excitation of dielectric barrier discharge xenon excimer lamps by unipolar short square pulses is studied in this paper. Two discharges with different polarity are excited by each voltage pulse (double discharge phenomenon). The primary discharge occurs at the top or at the rising flank of the applied unipolar square pulse, which is directly energized by the external circuit. The secondary discharge with the reversed polarity occurs at the falling flank or shortly after the falling flank end (zero external voltage) depending on the pulse width, which is energized by the energy stored by memory charges deposited by the primary discharge. Fast-speed ICCD imaging shows the primary discharge has a conic discharge appearance with a channel broadening on the anode side. This channel broadening increases with increasing the pulse top level. Only the anode-side surface discharge is observed in the primary discharge. The surface discharge on the cathode side which is present in bipolar sine voltage excitation is not observed. On the contrary, the secondary discharge has only the cathode-side surface discharge. The surface discharge on the anode side is not observed. The secondary discharge is much more diffuse than the primary discharge. Time-resolved emission measurement of double discharges show the secondary discharge emits more VUV xenon excimer radiation but less infrared (IR) xenon atomic emission than the primary discharge. It was found that the IR xenon atomic emission from the secondary discharge can be reduced by shortening the pulse width. The energy efficiency of unipolar-pulsed xenon excimer lamps (the overall energy efficiency of double discharges) is much higher than that obtained under bipolar sine wave excitation. The output VUV spectrum under unipolar pulse excitation is found to be identical to that under sine wave excitation and independent of injected electric power.

  15. A broadband excimer source of visible radiation with barrier discharge pumping

    Science.gov (United States)

    Malinin, A. N.; Polyak, A. V.

    2003-12-01

    We investigate the characteristics of a broadband cylindrical excimer source of visible radiation with a surface area of 230 cm2 excited by a pulse-periodic barrier discharge based on multicomponent mixtures (mercury diiodide and dibromide with helium and admixtures of molecular nitrogen and xenon). The working mixture components were excited by a pulse-periodic (pulse repetition rate 500 5000 Hz, pulse duration ˜150 ns) barrier discharge. We detected radiation from excimer HgI* and HgBr* molecules, the second positive system of molecular nitrogen, and mercury and xenon atoms. The amplitude, duration, and trailing edge of the radiation pulses in the HgI2:HgBr2:Xe:He and HgI2: HgBr2:N2:He mixtures with admixtures of xenon and molecular nitrogen were found to change compared to the HgI2:HgBr2:He mixture. The optimal partial pressure of helium lies within the range 162 195 kPa. The most intense radiation from HgI* and HgBr* molecules (in a ratio of more than 3: 1) is observed in the HgI2:HgBr2: Xe:He mixture. The mean and pulse radiation powers are 45 W and 93 kW, respectively, at a pumping pulse repetition rate of 5000 Hz and an efficiency of 30%. We discuss the spectral and temporal characteristics of the radiation source and the dependence of the radiation intensity of excimer molecules of mercury monoiodide and monobromide on the partial pressures of xenon and nitrogen. We point out that the radiation source is of considerable interest for applications in biotechnology and medicine.

  16. Cyclic up-regulation fluorescence of pyrene excimer for studying polynucleotide kinase activity based on dual amplification.

    Science.gov (United States)

    Xu, Jing; Gao, Yanfang; Li, Baoxin; Jin, Yan

    2016-06-15

    Due to its important biological and clinical roles of polynucleotide kinase (PNK), accurate monitoring of PNK activity and inhibition is highly desirable. Herein, a homogeneous and sensitive fluorescence assay has been proposed for the detection of PNK activity by integrating target recycling signal amplification of DNA toehold strand displacement reaction (TSDR) with gamma-cyclodextrin (γ-CD) enhancement of pyrene excimer. A label-free hairpin DNA1 (H1) and two singly pyrene-labelled DNA, H2 and H3, are designed. Accompanying the occurrence of the efficient enzyme reactions, namely phosphorylation-actuated λ exonuclease reaction, a single-stranded DNA as a trigger DNA (tDNA) of TSDR can be released from H1. Then, tDNA drives circulatory interactions between H2 and H3 to continuously form H2/H3 duplex, resulting in formation of pyrene excimer and a "turn on" fluorescence signal of pyrene excimer. Furthermore, the fluorescence of pyrene excimer is further amplified by introducing gamma-cyclodextrin (γ-CD), which can regulate the space proximity of two pyrene molecules. Thus, TSDR-induced cyclic formation of pyrene excimer and γ-CD enhancement can specifically up-regulate the fluorescence of pyrene excimer for detection of PNK activity, the detection limit is 9.3 × 10(-5)UmL(-1), which is superior to those of most existing approaches. Moreover, the proposed strategy can also be successfully utilized to study inhibition efficiency of different PNK inhibitors as well. Therefore, a dual amplification approach is provided for nucleic acid phosphorylation related researches.

  17. C50自密实钢管混凝土施工技术研究与应用%Construction technology research and application of C50 self-compacting steel tube-confined concrete

    Institute of Scientific and Technical Information of China (English)

    张海霞; 崔鑫; 王龙志; 李金龙; 范兆付

    2016-01-01

    南水北调工程河南庞村钢管混凝土无推力系杆拱桥项目设计采用C50高强、微膨胀、自密实混凝土灌注施工,混凝土灌注施工工艺为顶升法。通过优选骨料级配、使用微膨胀剂、高效减水剂等措施优化混凝土配合比,制备出性能参数符合顶升法施工要求的C50自密实钢管混凝土。混凝土灌注施工中,通过控制混凝土生产和运输,保证混凝土的连续灌注;通过清洗钢管、预灌砂浆、灌注节奏的控制,保证了混凝土与钢管的黏结与饱满;通过覆盖湿润的养护布连续养护14 d,保证了钢管混凝土的强度的顺利发展,通过以上措施的综合应用,经敲击法检验,混凝土于钢管内黏结牢靠、无缺陷、强度发展正常。%Pang village steel tube-confined concrete without thrust tied arch bridge project in Henan of South to North Water Diversion Project design pouring construction by using the C50 high strength,micro expansive,self-compacting concrete,the construction tech-nology of concrete pouring for lift-up method. Through optimizing aggregate gradation,using micro expansive agent and superplastici-zer and other measures to optimize mix of concrete,prepared C50 self-compacting steel tube-confined concrete,whose performance parameters meet the requirements of the lift-up method construction. In concrete pouring construction,through the control of concrete production and transportation to guarantee continuous pouring concrete. Through cleaning pipe,pre-pouring mortar,controlling perfu-sion rhythm to ensure the bond between concrete and steel tube with full. Through covering wet curing cloth and continuous curing 14 d to guarantee the smooth development of the strength of the steel tube-confined concrete. Through the integrated application of the a-bove measures,the concrete in steel tube bonds solid,no defects,strength normal development by the percussion method testing.

  18. Generation of nanosecond pulses in a barrier-discharge XeBr excimer lamp

    Science.gov (United States)

    Avdeev, S. M.; Kostyrya, I. D.; Sosnin, É. A.; Tarasenko, V. F.

    2006-07-01

    The subject of investigation is the coaxial two-barrier short-pulse excimer lamp based on XeBr* molecules (λ = 282 nm). When the working mixture (Xe: Br2 = 70: 1) is excited by a high-voltage pulsed nanosecond discharge at a pressure of 1 atm, the peak power of the generated radiation is on the order of 100 kW at an FWHM of 4.5 ns. If the gap between the barriers is small, a train of pulses with an FWHM of 20 ns and a repetition rate of 200 kHz may be obtained.

  19. Planar Bragg gratings made by excimer-laser modification of ion-exchanged waveguides.

    Science.gov (United States)

    Montero, C; Gomez-Reino, C; Brebner, J L

    1999-11-01

    The refractive indices of planar silver-ion-exchanged waveguides have been modified by UV excimer laser irradiation (lambda=193 nm) . The effective index changes of the fundamental modes of the waveguides after exposition are as large as 2x10(-2) . The procedure permits the fabrication of integrated optical components in a direct way, with neither the use of standard lithography nor previous sensitizing of the substrate. Optical characterization of the irradiated samples is presented. By the use of appropriate masks, we have fabricated planar Bragg gratings.

  20. [PKP for Keratoconus - From Hand/Motor Trephine to Excimer Laser and Back to Femtosecond Laser].

    Science.gov (United States)

    Seitz, B; Szentmáry, N; Langenbucher, A; Hager, T; Viestenz, A; Janunts, E; El-Husseiny, M

    2016-06-01

    For patients with keratoconus, rigid gas-permeable contact lenses are the first line correction method and allow good visual acuity for quite some time. In severe stages of the disease with major cone-shaped protrusion of the cornea, even specially designed keratoconus contact lenses are no longer tolerated. If there are contraindications for intrastromal ring segments, corneal transplantation typically has a very good prognosis. In patients with advanced keratoconus - especially after corneal hydrops due to rupture of Descemet's membrane - penetrating keratoplasty (PKP) is still the first line surgical method. Non-contact excimer laser trephination seems to be especially beneficial for eyes with iatrogenic keratectasia after LASIK and for patients with repeat grafts due to "keratoconus recurrences" due to small grafts with thin host cornea. For donor trephination from the epithelial side, an artificial chamber is used. Wound closure is achieved with a double running cross-stitch suture according to Hoffmann. Graft size is adapted individually, depending on corneal size ("as large as possible - as small as necessary"). Limbal centration is preferred intraoperatively, due to optical displacement of the pupil. During the last 10 years, femtosecond laser trephination has been introduced from the USA as a potentially advantageous approach. Prospective clinical studies have shown that the technique of non-contact excimer laser PKP improves donor and recipient centration, reduces "vertical tilt" and "horizontal torsion" of the graft in the recipient bed, and thus results in significantly less "all-sutures-out" keratometric astigmatism (2.8 vs. 5.7 D), more regular topography (surface regularity index [SRI] 0.80 vs. 1.0) and better visual acuity (0.80 vs. 0.60), in comparison to the motor trephine. The stage of the disease does not influence functional outcome after excimer laser PKP. However, the refractive outcome of femtosecond laser keratoplasty resembles that with

  1. High efficiency metal marking with CO2 laser and glass marking with excimer laser

    DEFF Research Database (Denmark)

    Bastue, Jens; Olsen, Flemmming Ove

    1997-01-01

    with a thoroughly tested ray-tracing model is presented and compared with experimental results. Special emphasis is put on two different applications namely marking in metal with TEA-CO2 laser and marking in glass with excimer laser. The results are evaluated on the basis of the achievable energy enhancement......Today, mask based laser materials processing and especially marking is widely used. However, the energy efficiency in such processes is very low [1].This paper gives a review of the results, that may be obtained using the energy enhancing technique [1]. Results of simulations performed...

  2. Ongoing results of excimer laser photorefractive keratectomy for myopia: subjective patient impressions.

    Science.gov (United States)

    Fichte, C M; Bell, A M

    1994-03-01

    We present the results of a survey carried out by independent researchers to determine the subjective success rate of a series of excimer laser photorefractive keratectomy procedures to correct myopia. Thirty patients, selected at random from a group of 300, had received treatment to both eyes with a minimum of six months follow-up on the second eye. Forty-four patients, selected at random from a group of 120, had received treatment to one eye only with five months of follow-up. The results show a high level of satisfaction with the results of the procedure.

  3. Optical coherence tomography following percutaneous coronary intervention with Excimer laser coronary atherectomy

    Energy Technology Data Exchange (ETDEWEB)

    Rawlins, John, E-mail: john.rawlins@doctors.net.uk; Talwar, Suneel; Green, Mark; O’Kane, Peter

    2014-01-15

    The indications for Excimer laser coronary atherectomy (ELCA) have been refined in modern interventional practice. With the expanding role for optical coherence tomography (OCT) providing high-resolution intra-coronary imaging, this article examines the appearance of the coronary lumen after ELCA. Each indication for ELCA is discussed and illustrated with a clinical case, followed by detailed analysis of the OCT imaging pre and post ELCA. The aim of the article is to provide information to interventional cardiologists to facilitate decision making during PCI, when ELCA has been used as part of the interventional strategy.

  4. Excimers He2* as tracers of quantum turbulence in 4He in the t = 0 limit.

    Science.gov (United States)

    Zmeev, D E; Pakpour, F; Walmsley, P M; Golov, A I; Guo, W; McKinsey, D N; Ihas, G G; McClintock, P V E; Fisher, S N; Vinen, W F

    2013-04-26

    We have studied the interaction of metastable 4He2* excimer molecules with quantized vortices in superfluid 4He in the zero temperature limit. The vortices were generated by either rotation or ion injection. The trapping diameter of the molecules on quantized vortices was found to be 96±6  nm at a pressure of 0.1 bar and 27±5  nm at 5.0 bar. We have also demonstrated that a moving tangle of vortices can carry the molecules through the superfluid helium.

  5. Excimers He2* as tracers of quantum turbulence in He4 in the T=0 Limit

    OpenAIRE

    Zmeev, D. E.; Pakpour, F.; Walmsley, P. M.; Golov, A. I.; Guo, W; McKinsey, D. N.; Ihas, G. G.; McClintock, P. V. E.; Fisher, S. N.; Vinen, W. F.

    2013-01-01

    We have studied the interaction of metastable He2*4 excimer molecules with quantized vortices in superfluid He4 in the zero temperature limit. The vortices were generated by either rotation or ion injection. The trapping diameter of the molecules on quantized vortices was found to be 96±6 nm at a pressure of 0.1 bar and 27±5 nm at 5.0 bar. We have also demonstrated that a moving tangle of vortices can carry the molecules through the superfluid helium. © 2013 American Physical Society.

  6. Excimers He2* as Tracers of Quantum Turbulence in He4 in the T=0 Limit

    Science.gov (United States)

    Zmeev, D. E.; Pakpour, F.; Walmsley, P. M.; Golov, A. I.; Guo, W.; McKinsey, D. N.; Ihas, G. G.; McClintock, P. V. E.; Fisher, S. N.; Vinen, W. F.

    2013-04-01

    We have studied the interaction of metastable He2*4 excimer molecules with quantized vortices in superfluid He4 in the zero temperature limit. The vortices were generated by either rotation or ion injection. The trapping diameter of the molecules on quantized vortices was found to be 96±6nm at a pressure of 0.1 bar and 27±5nm at 5.0 bar. We have also demonstrated that a moving tangle of vortices can carry the molecules through the superfluid helium.

  7. Excimers He2* as Tracers of Quantum Turbulence in 4He in the T=0 Limit

    OpenAIRE

    Zmeev, Dmitriy; Pakpour, F.; Walmsley, P. M.; Golov, A.; Guo, Wei; McKinsey, D. N.; Ihas, G. G.; McClintock, P. V. E.; Fisher, Shaun; Vinen, W. F.

    2013-01-01

    We have studied the interaction of metastable $^4$He$_2^*$ excimer molecules with quantized vortices in superfluid $^4$He in the zero temperature limit. The vortices were generated by either rotation or ion injection. The trapping diameter of the molecules on quantized vortices was found to be $96\\pm6$\\,nm at a pressure of 0.1\\,bar and $27\\pm5$\\,nm at 5.0 bar. We have also demonstrated that a moving tangle of vortices can carry the molecules through the superfluid helium.

  8. Green synthesis of selenium nanoparticles by excimer pulsed laser ablation in water

    Directory of Open Access Journals (Sweden)

    O. Van Overschelde

    2013-10-01

    Full Text Available Pure selenium nanoparticles were successfully synthesized by Liquid Phase - Pulsed Laser Ablation (LP-PLA in de-ionized water. Excimer laser (248 nm operating at low fluence (F ∼ 1 J/cm2 was used to generate colloidal solutions of selenium nanoparticles. The obtained selenium nanoparticles were characterized by UV-visible spectroscopy, Raman spectroscopy, Dynamic Light Scattering, and Transmission Electron Microscopy. We describe the multi-modal size distributions generated and use the centrifugation method to isolate the smallest nanoparticles (∼60 nm in diameter.

  9. Lacunarity for compact groups.

    Science.gov (United States)

    Edwards, R E; Hewitt, E; Ross, K A

    1971-01-01

    Let G be a compact Abelian group with character group X. A subset Delta of X is called a [unk](q) set (1 < q < infinity) if for all trigonometric polynomials f = [unk](k=1) (n) alpha(k)chi(k) (chi(1),...,chi(n) [unk] Delta) an inequality parallelf parallel(q) [unk] [unk] parallelf parallel(1) obtains, where [unk] is a positive constant depending only on Delta. The subset Delta is called a Sidon set if every bounded function on Delta can be matched by a Fourier-Stieltjes transform. It is known that every Sidon set is a [unk](q) set for all q. For G = T, X = Z, Rudin (J. Math. Mech., 9, 203 (1960)) has found a set that is [unk](q) for all q but not Sidon. We extend this result to all infinite compact Abelian groups G: the character group X contains a subset Delta that is [unk](q) for all q, 1 < q < infinity, but Delta is not a Sidon set.

  10. A compact SADM family

    Science.gov (United States)

    Barbet, Vincent; Le Quintrec, Cyrille; Jeandot, Xavier; Chaix, Alain; Grain, Eric; Roux, Jerome

    2005-07-01

    Alcatel Space has developed a new SADM family driven by cost, modularity, mass and performances. The modularity concept is based on separating the rotation drive function from the electrical transfer function. The drive actuator has been designed for various applications where pointing and reliability is needed. It can be associated with high dissipative rotary devices (SA collectors, RF joints..). The design goal was to minimize the number of parts in order to reach the most simple and compact mechanism. Mass reduction was achieved by reducing as much as possible the load path between the Solar Array interface and the spacecraft interface. Following these guidelines, the drive actuator was developed and qualified on ATV SADM (part od Alcatel Space Solar Array Drive Sub System for ATV). Further more a high power integrated collector was qualified inside the SADM for Geo-stationary telecom satellite (SPACEBUS platforms). Fine thermal and mechanical modeling was necessary to predict SADM behaviors for the numerous thermal environments over the missions (steady and transient cases). These modeling were well correlated through mechanical and thermal balances qualification tests. The challenging approach of thermal dissipation in a compact design leads to a family of 3 SADM capabilities form 2kW up to 15kW per SADM weighing less than 4.5 kg each.

  11. Compact electrostatic comb actuator

    Science.gov (United States)

    Rodgers, M. Steven; Burg, Michael S.; Jensen, Brian D.; Miller, Samuel L.; Barnes, Stephen M.

    2000-01-01

    A compact electrostatic comb actuator is disclosed for microelectromechanical (MEM) applications. The actuator is based upon a plurality of meshed electrostatic combs, some of which are stationary and others of which are moveable. One or more restoring springs are fabricated within an outline of the electrostatic combs (i.e. superposed with the moveable electrostatic combs) to considerably reduce the space required for the actuator. Additionally, a truss structure is provided to support the moveable electrostatic combs and prevent bending or distortion of these combs due to unbalanced electrostatic forces or external loading. The truss structure formed about the moveable electrostatic combs allows the spacing between the interdigitated fingers of the combs to be reduced to about one micron or less, thereby substantially increasing the number of active fingers which can be provided in a given area. Finally, electrostatic shields can be used in the actuator to substantially reduce unwanted electrostatic fields to further improve performance of the device. As a result, the compact electrostatic comb actuator of the present invention occupies only a fraction of the space required for conventional electrostatic comb actuators, while providing a substantial increase in the available drive force (up to one-hundred times).

  12. Compaction of Titanium Powders

    Energy Technology Data Exchange (ETDEWEB)

    Gerdemann, Stephen,J; Jablonski, Paul, J

    2011-05-01

    Accurate modeling of powder densification has been an area of active research for more than 60 years. The earliest efforts were focused on linearization of the data because computers were not readily available to assist with curve-fitting methods. In this work, eight different titanium powders (three different sizes of sponge fines<150 {micro}m,<75 {micro}m, and<45 {micro}m; two different sizes of a hydride-dehydride [HDH]<75 {micro}m and<45 {micro}m; an atomized powder; a commercially pure [CP] Ti powder from International Titanium Powder [ITP]; and a Ti 6 4 alloy powder) were cold pressed in a single-acting die instrumented to collect stress and deformation data during compaction. From these data, the density of each compact was calculated and then plotted as a function of pressure. The results show that densification of all the powders, regardless of particle size, shape, or chemistry, can be modeled accurately as the sum of an initial density plus the sum of a rearrangement term and a work-hardening term. These last two terms are found to be a function of applied pressure and take the form of an exponential rise.

  13. Amorphous Silicon Film Deposition from SiH4 by Chemical Vapor Deposition with Argon Excimer Lamp

    Science.gov (United States)

    Toshikawa, Kiyohiko; Yokotani, Atsushi; Kurosawa, Kou

    2005-11-01

    We have deposited amorphous silicon thin films from monosilane (SiH4) gas by photochemical vapor deposition using a vacuum ultraviolet excimer lamp (VUV-CVD). We used an argon excimer lamp (λ=126 nm, hν=9.8 eV) whose photons are strongly absorbed by SiH4 gas. The substrate temperatures were changed from 25 to 300°C. When the temperature was lower than 150°C, the films included H--Si--H units and H2 molecules in its structure. When it was higher than 150°C, the main structural unit was Si--H.

  14. Ultraviolet excimer laser ablation: the effect of wavelength and repetition rate on in vivo guinea pig skin

    Energy Technology Data Exchange (ETDEWEB)

    Morelli, J.; Kibbi, A.G.; Farinelli, W.; Boll, J.; Tan, O.T.

    1987-06-01

    Multiple dermatologic conditions that are currently treated with traditional cold-knife surgery are amenable to laser therapy. The ideal surgical treatment would be precise and total removal of abnormal tissue with maximal sparing of remaining structures. The ultraviolet (UV) excimer laser is capable of such precise tissue removal due to the penetration depth of 193 nm and 248 nm irradiation of 1 micron per pulse. This type of ablative tissue removal requires a high repetition rate for efficient lesional destruction. Excimer laser radiation at 193 nm is capable of high repetition rates, which are necessary while 248 nm radiation causes increasing nonspecific thermal injury as the laser repetition rate is increased.

  15. Investigation of HMA compactability using GPR technique

    Science.gov (United States)

    Plati, Christina; Georgiou, Panos; Loizos, Andreas

    2014-05-01

    In-situ field density is often regarded as one of the most important controls used to ensure that an asphalt pavement being placed is of high quality. The achieved density results from the effectiveness of the applied compaction mode on the Hot Mix Asphalt (HMA) layer. It is worthwhile mentioning that the proper compaction of HMA increases pavement fatigue life, decreases the amount of permanent deformation or rutting, reduces the amount of oxidation or aging, decreases moisture damage or stripping, increases strength and internal stability, and may decrease slightly the amount of low-temperature cracking that may occur in the mix. Conventionally, the HMA density in the field is assessed by direct destructive methods, including through the cutting of samples or drilling cores. These methods are characterized by a high accuracy, although they are intrusive and time consuming. In addition, they provide local information, i.e. information only for the exact test location. To overcome these limitations, the use of non-intrusive techniques is often recommended. The Ground Penetrating Radar (GPR) technique is an example of a non-intrusive technique that has been increasingly used for pavement investigations over the years. GPR technology is practical and application-oriented with the overall design concept, as well as the hardware, usually dependent on the target type and the material composing the target and its surroundings. As the sophistication of operating practices increases, the technology matures and GPR becomes an intelligent sensor system. The intelligent sensing deals with the expanded range of GPR applications in pavements such as determining layer thickness, detecting subsurface distresses, estimating moisture content, detecting voids and others. In addition, the practice of using GPR to predict in-situ field density of compacted asphalt mixture material is still under development and research; however the related research findings seem to be promising

  16. On stable compact minimal submanifolds

    CERN Document Server

    Torralbo, Francisco

    2010-01-01

    Stable compact minimal submanifolds of the product of a sphere and any Riemannian manifold are classified whenever the dimension of the sphere is at least three. The complete classification of the stable compact minimal submanifolds of the product of two spheres is obtained. Also, it is proved that the only stable compact minimal surfaces of the product of a 2-sphere and any Riemann surface are the complex ones.

  17. Surface studies on benzophenone doped PDMS microstructures fabricated using KrF excimer laser direct write lithography

    Energy Technology Data Exchange (ETDEWEB)

    Kant, Madhushree Bute; Shinde, Shashikant D. [Department of Physics, University of Pune, Pune 411007 (India); Bodas, Dhananjay [Centre for Nanobioscience, Agharkar Research Institute, Agharkar road, Pune 411004 (India); Patil, K.R. [Center for Materials Characterization, National Chemical Laboratories, Pune 411008 (India); Sathe, V.G. [UGC DAE Inter University Consortium, Indore 452017 (India); Adhi, K.P. [Department of Physics, University of Pune, Pune 411007 (India); Gosavi, S.W., E-mail: swg@physics.unipune.ac.in [Department of Physics, University of Pune, Pune 411007 (India)

    2014-09-30

    Graphical abstract: - Highlights: • Use of KrF Laser micromachining for Lab-On-Chip applications at lower fluence. • Addition of Benzophenone in PDMS enhances its self development sensitivity. • Benzophenone helps efficient energy transfer for equal density of bond scissioning. • Correlation of chemical composition with laser dose and microstructure. • Microstructures with well defined clean sidewalls. - Abstract: This paper discusses microfabrication process for benzophenone doped polydimethylsiloxane (PDMS) using laser lithography. KrF excimer laser of 248 nm with 20 ns pulse width at repetition rate of 1 Hz was used for microfabrication of undoped and benzophenone doped PDMS. The doped-PDMS shows sensitivity below 365 nm, permitting processing under ambient light. The analysis of etch depth revealed that doped PDMS shows self developable sensitivity at lower fluence of ∼250 mJ/cm{sup 2}. The unexposed and exposed surface was studied using Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy and Scanning electron microscopy (SEM). Spectrocopic analysis indicated increase in C-O, C=O, Si-O{sub 3} and Si-O{sub 4} bonding at the expense of Si-C and Si-O{sub 2} bonds of PDMS. In case of laser exposed doped-PDMS, removal of benzophenone from probe depth of spectroscopy was observed. Whereas the surface morphology of exposed and unexposed doped-PDMS was observed to be same, indicating clean development of PDMS micropatterns. The present study indicates that addition of 3.0 wt.% benzophenone in PDMS enhance self development sensitivity of PDMS. The self developable results on doped-PDMS are quite encouraging for its potential use in point of care Lab-On-Chip applications, for fabricating micropatterns using direct write laser lithography technology.

  18. A compact PE memory for vision chips

    Science.gov (United States)

    Cong, Shi; Zhe, Chen; Jie, Yang; Nanjian, Wu; Zhihua, Wang

    2014-09-01

    This paper presents a novel compact memory in the processing element (PE) for single-instruction multiple-data (SIMD) vision chips. The PE memory is constructed with 8 × 8 register cells, where one latch in the slave stage is shared by eight latches in the master stage. The memory supports simultaneous read and write on the same address in one clock cycle. Its compact area of 14.33 μm2/bit promises a higher integration level of the processor. A prototype chip with a 64 × 64 PE array is fabricated in a UMC 0.18 μm CMOS technology. Five types of the PE memory cell structure are designed and compared. The testing results demonstrate that the proposed PE memory architecture well satisfies the requirement of the vision chip in high-speed real-time vision applications, such as 1000 fps edge extraction.

  19. Atacama Compact Array Antennas

    CERN Document Server

    Saito, Masao; Nakanishi, Kouichiro; Naoi, Takahiro; Yamada, Masumi; Saito, Hiro; Ikenoue, Bungo; Kato, Yoshihiro; Morita, Kou-ichiro; Mizuno, Norikazu; Iguchi, Satoru

    2011-01-01

    We report major performance test results of the Atacama Compact Array (ACA) 7-m and 12-m antennas of ALMA (Atacama Large Millimeter/submillimeter Array). The four major performances of the ACA antennas are all-sky pointing (to be not more than 2.0 arcsec), offset pointing (to be < 0.6 arcsec) surface accuracy (< 25(20) micrometer for 12(7)m-antenna), stability of path-length (15 micrometer over 3 min), and high servo capability (6 degrees/s for Azimuth and 3 degrees/s for Elevation). The high performance of the ACA antenna has been extensively evaluated at the Site Erection Facility area at an altitude of about 2900 meters. Test results of pointing performance, surface performance, and fast motion capability are demonstrated.

  20. Compact particle accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Elizondo-Decanini, Juan M.

    2017-08-29

    A compact particle accelerator having an input portion configured to receive power to produce particles for acceleration, where the input portion includes a switch, is provided. In a general embodiment, a vacuum tube receives particles produced from the input portion at a first end, and a plurality of wafer stacks are positioned serially along the vacuum tube. Each of the plurality of wafer stacks include a dielectric and metal-oxide pair, wherein each of the plurality of wafer stacks further accelerate the particles in the vacuum tube. A beam shaper coupled to a second end of the vacuum tube shapes the particles accelerated by the plurality of wafer stacks into a beam and an output portion outputs the beam.

  1. Pressure dependence of emission intensity of rare-gas excimer light produced by silent discharge; Teikiatsu ryoiki ni okeru musei hoden reiki ki gas excimer hikari shutsuryoku no atsuryoku izonsei

    Energy Technology Data Exchange (ETDEWEB)

    Yoshida, Y.; Tanaka, M.; Yukimura, K. [Doshisha University, Kyoto (Japan)

    1996-09-20

    To establish the pressure dependence of silent discharge excited rare gas excimer light emission, a vacua ultraviolet light was subjected to spectroscopic analysis at a pressure lower than 20kPa. Researches are under way to apply the discharge excited rare gas excimer lamp as a vacuum ultraviolet light source for the development of new materials and for the conservation of environments. When the pressure is as low as 1.8kPa or 4.4kPa, the emission has peaks at wavelengths centering on 147nm and 149nm, both of which are the resonance lines of the xenon atom. Excimer generation becomes prominent as the pressure increases, with the second continuum of light growing dominant at 35kPa to weaken relatively the resonance lines and the first continuum of light. In the first continuum, emission increases only at a suppressed rate, as compared with emission in the second continuum, due for instance to a collision caused relaxation process in which excimers are lost. In the case of xenon in the vicinity of 10-11kPa, the first continuum of light and the second continuum of light are approximately equal in emission intensity, producing a vacuum ultraviolet light source with a bandwidth relatively large for a single gas spectrum. 14 refs., 11 figs.

  2. New excimer laser technique for the correction of strabismus and diplopia

    Science.gov (United States)

    Azar, Dimitri T.

    1994-06-01

    We used the ArF excimer laser to determine the feasibility of performing prismatic photoablations in model eyes (plastic spheres simulating the eye), and in rabbit corneas. This would correct diplopia and small angles of deviation, and result in minimal refractive alterations. We modified excimer laser delivery system that achieved the desired corneal contour of prismatic ablations. 193-nm argon fluoride laser was used at fluence of 160 mJ/cm2 and ablation rate 5 Hz. 5.0-mm diameter, 40 um corneal epithelial ablation were followed by 5.0- mm diameter, prismatic photokeratectomy (PPK). We were able to achieve prismatic photoablation of PMMA blocks and lenses. No other refractive changes accompanied the prismatic photoablation of PMMA blocks and lenses. No other refractive changes accompanied the prismatic effect. In rabbits re-epithelialization of the 5-mm ablations was complete by day 3, and corneal haze was not observed by gross examination. Epithelial hyperplasia and subepithelial scarring were noted at the deep edges. PPK holds important therapeutic potential for fine-tuning results of conventional strabismus surgery, and for patients with stable diplopia following nerve palsy and ocular surgery.

  3. Fabrication of SERS Active Surface on Polyimide Sample by Excimer Laser Irradiation

    Directory of Open Access Journals (Sweden)

    T. Csizmadia

    2014-01-01

    Full Text Available A possible application of excimer laser irradiation for the preparation of surface enhanced Raman spectroscopy (SERS substrate is demonstrated. A polyimide foil of 125 μm thickness was irradiated by 240 pulses of focused ArF excimer laser beam (λ = 193 nm, FWHM = 20 ns. The applied fluence was varied between 40 and 80 mJ/cm2. After laser processing, the sample was coated with 40 nm silver by PLD in order to create a conducting layer required for the SERS application. The SERS activity of the samples was tested by Raman microscopy. The Raman spectra of Rhodamine 6G aqueous solution (c=10−3 mol/dm3 were collected from the patterned and metalized areas. For areas prepared at 40–60 mJ/cm2 laser fluences, the measured Raman intensities have shown a linear dependence on the applied laser fluence, while above 60 mJ/cm2 saturation was observed. The morphology of the SERS active surface areas was investigated by scanning electron microscopy. Finite element modeling was performed in order to simulate the laser-absorption induced heating of the polyimide foil. The simulation resulted in the temporal and spatial distribution of the estimated temperature in the irradiated polyimide sample, which are important for understanding the structure formation process.

  4. Emission Spectra of Working Mixtures of a HgBr/HgCl Excimer Lamp

    Science.gov (United States)

    Malinin, A. N.; Guĭvan, N. N.; Shimon, L. L.

    2000-12-01

    A study of emission spectra of a gas-discharge plasma produced in a HgBr/HgCl excimer lamp, which is filled with multicomponent working mixtures at atmospheric pressure (HgBr2 and HgCl2 with additions of molecular nitrogen and xenon), are reported. A gas-discharge plasma was produced by high-frequency (pulses ˜100 ns long with a repetition rate of up to 2000 Hz) barrier and surface discharges, which took place simultaneously. Emission of HgBr* and HgCl* excimer molecules, the second positive system of molecular oxygen, and helium and xenon lines in the UV, visible, and IR spectral regions was observed. The strongest emission of HgBr* and HgCl* molecules (the emission intensities were in the ratio 10:1) was observed in the HgBr2: HgCl2: N2: He mixture. Regularities in spectral and integrated characteristics of gas-discharge plasma emission are discussed.

  5. A Comparison of AC and Short-Pulse Excitation for Xe Excimer Barrier Discharge Lamps

    Science.gov (United States)

    Mildren, R. P.; Morrow, R.; Carman, R. J.

    1999-10-01

    Dielectric barrier discharge excitation of rare-gas and rare-gas halide excimers provides an efficient scheme for generating intense VUV radiation for applications including lighting, ozonisation, and photochemical surface treatment. Typically, lamps employ AC (sinusoidal) voltage excitation in which case VUV emission is produced from short-livid micro discharges (streamers) distributed stochastically over the dielectric. However, it has been recently demonstrated that significantly increased efficiency (by factor 2-3) can be obtained from Xe lamps when using short excitation pulses separated by idle periods[1]. In this paper, we report an investigation into the mechanisms which bring about improved efficiency by comparing the electrical, spectral and spatial emission characteristics of a small-scale Xe lamp excited by short pulses ( 100ns) with that of conventional AC excitation. The results reveal that pulsed excitation produces a homogenous glow-like discharge in which the electron density and temperature are more favourable for efficient excimer production. [1] RP Mildren et al, IVth Int. Conf. Atom. and Molec. Pulsed Lasers, Tomsk, Siberia Sept. (1999); F Vollkommer and L Hitzschke, Proc. 8th Int. Symp. Sci. Tech. Light Sources, Greifswald, Germany, '98, IL-07, pp51-59 (1998)

  6. Photo-triggering and secondary electron produced ionization in electric discharge ArF* excimer lasers

    Science.gov (United States)

    Xiong, Zhongmin; Kushner, Mark J.

    2011-10-01

    Electric discharge excimer lasers are sustained in multi-atmosphere attaching gas mixtures that are typically preionized to enable a reproducible, uniform glow, which maximizes optical quality and gain. This preionization is often accomplished using UV light produced by a corona discharge within the plasma cavity. To quantify the relationship between corona discharge properties and those of the laser discharge, the triggering of electron avalanche by preionizing UV light in an electric discharge-pumped ArF* excimer laser was numerically investigated using a two-dimensional model. The preionizing UV fluxes were generated by a corona-bar discharge driven by the same voltage pulse as the main discharge sustained in a multi-atmospheric Ne/Ar/Xe/F2 gas mixture. The resulting peak photo-electron density in the inter-electrode spacing is around 108 cm-3, and its distribution is biased toward the UV source. The preionization density increases with increasing dielectric constant and capacitance of the corona bar. The symmetry and uniformity of the discharge are, however, improved significantly once the main avalanche develops. In addition to bulk electron impact ionization, the ionization generated by sheath accelerated secondary electrons was found to be important in sustaining the discharge current at experimentally observed values. At peak current, the magnitude of the ionization by sheath accelerated electrons is comparable to that from bulk electron impact in the vicinity of the cathode.

  7. Pathogen control in complex fluids with water-coupled excimer lamps at 282 and 308 nm.

    Science.gov (United States)

    Coogan, John J

    2005-01-01

    Water-coupled excimer lamp systems have been developed to inactivate microorganisms within complex, low-optical quality, fluids. Monochromatic lamps were selected to minimize UV-B and UV-C absorption within the carrier fluids while maximizing deposition within specific chemical targets. Fundamentals, system scaling and power supply design are discussed. This work used two large-surface area excimer lamps as intense sources of near monochromatic radiation at 308 and 282 nm. Data are presented for two distinct fluid systems: flow-through processing of large-volume metalworking fluids used in heavy industry and batch irradiation of human blood plasma and platelet suspensions used in transfusion medicine. In the first, a 200-600 L/min reactor is used to control bacterial concentrations within metalworking fluids used in large-scale metal machining processes. Control is defined as the maintenance of 10(3) to 10(4) CFU/mL in fluids that without treatment would have concentrations over 10(7) CFU/mL. The second is a batch process for viral inactivation in undiluted blood bank products. Samples of fresh frozen plasma and platelet suspensions were spiked with high titers of porcine parvovirus (PPV) and irradiated at 308 and 282 nm. Although both wavelengths were effective at reducing PPV levels, 308 nm light resulted in both higher rates of viral inactivation (greater than 6 log units) and lower rates of fluid degradation.

  8. Excimer laser micromachining of oblique microchannels on thin metal films using square laser spot

    Indian Academy of Sciences (India)

    SYED NADEEM AKHTAR; SHASHANK SHARMA; S ANANTHA RAMAKRISHNA; J RAMKUMAR

    2016-06-01

    Excimer laser micromachining of thin metal films with a sacrificial polymer coating is a novel technique that produces features with smooth edges. Using this technique, oblique microchannels are fabricated by workpiece dragging and using a square laser spot, where the axis of traverse of the workpiece is not parallel to the edges of the square laser spot. The microchannels have serrated edges that are particular to the shape of the mask producing the spot. The edge roughness of the channels, machined with a square laser spot of side 100lm, is found to be most affected by the fluence–spot overlap interaction, and the channel width by spot-overlap and the angle of tilt of the traversed path. Polymer coated metal films underwent close to ideal machining, aided by the clamping action of the polymer layer. Through this technique of machining post polymer coating, the edge roughnesses of the microchannels have been curtailed to less than 10 lm, and channel widths to 150 lm. This technique may be used in fabrication of oblique and circular patterns using excimer laser micromachiningwith rectangular and square laser spots

  9. Cation-Controlled Excimer Packing in Langmuir-Blodgett Films of Hemicyanine Amphiphilic Chromoionophores.

    Science.gov (United States)

    Selektor, S L; Shcherbina, M A; Bakirov, A V; Batat, P; Grauby-Heywang, C; Grigorian, S; Arslanov, V V; Chvalun, S N

    2016-01-19

    Supramolecular structure of ultrathin films of hemicyanine dye bearing a crown ether group (CrHCR) was tuned by lateral pressure and investigated by means of compression isotherms, UV-vis and fluorescence spectroscopies, and X-ray reflectivity. Two different types of aggregation were revealed, depending on the absence or the presence of metal cations in the water subphase. While CrHCR forms at high surface pressures head-to-tail stacking aggregates on pure water, changing the subphase to a metal-cation-containing one leads to the appearance of well-defined excimers with head-to-head orientation. The structure of monolayers transferred onto solid supports by the Langmuir-Blodgett (LB) technique was examined by use of X-ray reflectivity measurements and molecular modeling. A model of cation-induced excimer formation in hemicyanine Langmuir monolayers is proposed. Finally, fluorescence emission properties of LB films of CrHCR can be managed by appropriate changes in the subphase composition, this last one determining the type of chromophore aggregation.

  10. The Finslerian compact star model

    Energy Technology Data Exchange (ETDEWEB)

    Rahaman, Farook; Paul, Nupur [Jadavpur University, Department of Mathematics, Kolkata, West Bengal (India); De, S.S. [University of Calcutta, Department of Applied Mathematics, Kolkata (India); Ray, Saibal [Government College of Engineering and Ceramic Technology, Department of Physics, Kolkata, West Bengal (India); Jafry, M.A.K. [Shibpur Dinobundhoo Institution, Department of Physics, Howrah, West Bengal (India)

    2015-11-15

    We construct a toy model for compact stars based on the Finslerian structure of spacetime. By assuming a particular mass function, we find an exact solution of the Finsler-Einstein field equations with an anisotropic matter distribution. The solutions are revealed to be physically interesting and pertinent for the explanation of compact stars. (orig.)

  11. Warm compacting behavior of stainless steel powders

    Institute of Scientific and Technical Information of China (English)

    肖志瑜; 柯美元; 陈维平; 召明; 李元元

    2004-01-01

    The warm compacting behaviors of four different kinds of stainless steel powders, 304L, 316L, 410L and 430L, were studied. The results show that warm compaction can be applied to stainless steel powders. The green densities and strengths of compacts obtained through warm compaction are generally higher than those obtained through cold compaction. The compacting behaviors in warm compaction and cold compaction are similar.Under the compacting pressure of 700 MPa, the warm compacted densities are 0. 10 - 0.22 g/cm3 higher than the cold compacted ones, and the green strengths are 11.5 %-50 % higher. The optimal warm compacting temperature is 100 - 110 ℃. In the die wall lubricated warm compaction, the optimum internal lubricant content is 0.2%.

  12. The excimer lamp induces cutaneous nerve degeneration and reduces scratching in a dry-skin mouse model.

    Science.gov (United States)

    Kamo, Atsuko; Tominaga, Mitsutoshi; Kamata, Yayoi; Kaneda, Kazuyuki; Ko, Kyi C; Matsuda, Hironori; Kimura, Utako; Ogawa, Hideoki; Takamori, Kenji

    2014-12-01

    Epidermal hyperinnervation, which is thought to underlie intractable pruritus, has been observed in patients with atopic dermatitis (AD). The epidermal expression of axonal guidance molecules has been reported to regulate epidermal hyperinnervation. Previously, we showed that the excimer lamp has antihyperinnervative effects in nonpruritic dry-skin model mice, although epidermal expression of axonal guidance molecules was unchanged. Therefore, we investigated the antipruritic effects of excimer lamp irradiation and its mechanism of action. A single irradiation of AD model mice significantly inhibited itch-related behavior 1 day later, following improvement in the dermatitis score. In addition, irradiation of nerve fibers formed by cultured dorsal root ganglion neurons increased bleb formation and decreased nerve fiber expression of nicotinamide mononucleotide adenylyl transferase 2, suggesting degenerative changes in these fibers. We also analyzed whether attaching a cutoff excimer filter (COF) to the lamp, thus decreasing cytotoxic wavelengths, altered hyperinnervation and the production of cyclobutane pyrimidine dimer (CPD), a DNA damage marker, in dry-skin model mice. Irradiation with COF decreased CPD production in keratinocytes, as well as having an antihyperinnervative effect, indicating that the antipruritic effects of excimer lamp irradiation with COF are due to induction of epidermal nerve degeneration and reduced DNA damage.

  13. Single-Grain Si TFTs Fabricated by Liquid-Si and Long-Pulse Excimer-Laser

    NARCIS (Netherlands)

    Ishihara, R.; Zhang, J.; Trifunovic, M.; Van der Zwan, M.; Takagishi, H.; Kawajiri, R.; Shimoda, T.; Beenakker, C.I.M.

    2012-01-01

    Solution process of silicon using liquid-Si is attractive for fabrication of high-speed flexible electronics. We have fabricated single-grain Si TFTs on location-controlled Si grains with longpulse excimer laser crystallization of spin-coated liquid Si film. The maximum grain diameter is 3.5μm, and

  14. (100)-textured self-assembled square-shaped polycrystalline silicon grains by multiple shot excimer laser crystallization

    NARCIS (Netherlands)

    He, M.; Ishihara, R.; Metselaar, W.; Beenakker, K.

    2006-01-01

    Strong preference for (100) surface and in-plane orientations has been observed in polycrystalline silicon film on SiO2 after crystallization with multiple excimer laser pulses. Laser induced periodic surface structure (LIPSS) is developed in the film, constructing self-assembled square-shaped grain

  15. Selective Determination of tetrabromobisphenol A by liquid chromatography following intramolecular excimer-forming fluorescence derivatization with pyrene-labeling reagent

    Energy Technology Data Exchange (ETDEWEB)

    Yoshida, H.; Tsunetomo, S.; Todoroki, K.; Nohta, H.; Yamaguchi, M. [Fukuoka Univ. (Japan); Hayama, T. [Foundation for Kyushu Environmental and Occupational Health, Kurume (Japan); Kuroki, H. [Daiichi College of Pharmaceutical Sciences, Fukuoka (Japan)

    2004-09-15

    A large number of compounds have been used as flame-retardants to protect different products from catching fire, and one of the most widely used flameretardants is tetrabromobisphenol A (TBBPA). Trace amounts of TBBPA have been determined by gas chromatography (GC) with electron-capture detection or GC-mass spectrometry (MS) as reviewed in. Only a few liquid chromatographic (LC) methods have been reported. Recently, we developed highly selective and sensitive determination methods for polyamines and dicarboxylic acids based on intramolecular excimer-forming fluorescence derivatization using pyrene reagents. By the derivatization, the resulting polypyrene-labeled derivatives of polyamines and dicarboxylic acids provided intramolecular excimer fluorescence at the wavelength region of 440 - 520 nm, which was shifted markedly to the higher emission wavelengths as compared to the wavelengths of the pyrene reagent itself and monopyrene-labeled concomitants (360 - 420 nm). This chemistry allowed to selectively analyzing poly-functional compounds even in the complex samples containing monofunctional compounds. More recently, we have found that 4-(1-pyrene)butanoyl chloride (PBC) reacts with not only polyamines, but also phenol compounds such as bisphenols, and the obtained PBC derivatives form strong intramolecular excimers. The aim of this work was to develop an intramolecular excimer-forming derivatization method for fluorimetric determination of halogenated-bisphenols including TBBPA following their derivatization with PBC. The new method allows a highly sensitive and selective determination of tetrabromobisphenol A.

  16. Effect of preionization, fluorine concentration, and current density on the discharge uniformity in F2 excimer laser gas mixtures

    NARCIS (Netherlands)

    Mathew, D.; Bastiaens, Hubertus M.J.; Boller, Klaus J.; Peters, P.J.M.

    2007-01-01

    The discharge homogeneity in F2-based excimer laser gas mixtures and its dependence on various key parameters, such as the degree of preionization, preionization delay time, F2 concentration and current density, is investigated in a small x-ray preionized discharge chamber. The spatial and temporal

  17. Sequential amplitude divided angular multiplexing encoding optical system design for high power excimer laser system%连续分振幅式高功率准分子激光角多路编码光路设计

    Institute of Scientific and Technical Information of China (English)

    胡云; 王大辉; 赵学庆

    2016-01-01

    In high power excimer laser system, angular multiplexing technique is employed to achieve both high energy and narrow pulse output. In this article, angular multiplexing technique was introduced, and a multiplexing encoding method was presented. This method encoded seed beam in two steps by sequential amplitude splitting. The optical elements were arranged in rectangle arrays and piled by layers. A specific optical design was made for XeCl high power excimer laser system in this laboratory. This method of angular multiplexing encoding has advantages of compacted space, small encoding error, good compatibility with alignment and measurement, and is also easy to fabricate and assemble. This design is adopted in the system and performs well.%在高功率准分子激光系统中,一般采用光学角多路技术来获得高能量窄脉冲输出。文中介绍了角多路技术原理,提出了一种采用矩形阵列和空间层叠光路结构的连续分振幅两次编码方式,并针对该实验室的XeCl高功率准分子激光系统进行了具体的编码光路设计,给出了设计实例。该方法具有编码结构紧凑,编码精度高,与光路准直、激光参数测量系统等兼容性好,便于加工制作和安装调节等优点,目前已在系统中应用,效果良好。

  18. Effect of an antioxydant cream versus placebo in patients with vitiligo in association with excimer laser. A pilot randomized, investigator-blinded, and half-side comparison trial.

    Science.gov (United States)

    Leone, G; Paro Vidolin, A

    2015-08-01

    The aim of this study was to evaluate the combined effect of excimer laser and a topical antioxidant in the treatment for vitiligo. The study was conducted in a single blinded design on 10 vitiligo patients with symmetrical vitiligo lesions treated with the active antioxidant or a placebo that were irradiated with an excimer laser. Results have shown that the lesions treated with the active cream achieved earlier regimentation compared to the placebo. The use of a cream containing antioxidants may improve the results of excimer laser treatment in patients with vitiligo.

  19. Compact networked radars for Army unattended ground sensors

    Science.gov (United States)

    Wikner, David A.; Viveiros, Edward A.; Wellman, Ronald; Clark, John; Kurtz, Jim; Pulskamp, Jeff; Proie, Robert; Ivanov, Tony; Polcawich, Ronald G.; Adler, Eric D.

    2010-04-01

    The Army Research Laboratory is in partnership with the University of Florida - Electronics Communications Laboratory to develop compact radar technology and demonstrate that it is scalable to a variety of ultra-lightweight platforms (<10 lbs.) to meet Army mission needs in persistent surveillance, unattended ground sensor (UGS), unmanned systems, and man-portable sensor applications. The advantage of this compact radar is its steerable beam technology and relatively long-range capability compared to other small, battery-powered radar concepts. This paper will review the ongoing development of the sensor and presents a sample of the collected data thus far.

  20. Compaction of quasi-one-dimensional elastoplastic materials

    Science.gov (United States)

    Shaebani, M. Reza; Najafi, Javad; Farnudi, Ali; Bonn, Daniel; Habibi, Mehdi

    2017-06-01

    Insight into crumpling or compaction of one-dimensional objects is important for understanding biopolymer packaging and designing innovative technological devices. By compacting various types of wires in rigid confinements and characterizing the morphology of the resulting crumpled structures, here, we report how friction, plasticity and torsion enhance disorder, leading to a transition from coiled to folded morphologies. In the latter case, where folding dominates the crumpling process, we find that reducing the relative wire thickness counter-intuitively causes the maximum packing density to decrease. The segment size distribution gradually becomes more asymmetric during compaction, reflecting an increase of spatial correlations. We introduce a self-avoiding random walk model and verify that the cumulative injected wire length follows a universal dependence on segment size, allowing for the prediction of the efficiency of compaction as a function of material properties, container size and injection force.

  1. Excimer laser "corneal shaping": a new technique for customized trephination in penetrating keratoplasty. First experimental results in rabbits.

    Science.gov (United States)

    Schmitz, Klaus; Schreiber, Wolfram; Behrens-Baumann, Wolfgang

    2003-05-01

    The aim of the presented experimental work was to develop a technique for congruent trephination of donor and recipient corneas in free form using a 193-nm excimer laser and to study the clinical follow-up after the application of the technique in a rabbit model. In 12 New Zealand White rabbits homologous penetrating keratoplasty was performed. Trephination of donor buttons and recipient beds was achieved in six animals by conventional mechanical trephination and in six by excimer laser trephination with a guided laser beam in a non-circular geometry. The surgical procedure and its applicability to human subjects were evaluated and the postoperative clinical course was followed for 6 months. The surgical procedure of full-thickness excimer laser trephination could be performed reproducibly in the animal model both for dissection of the donor buttons and for preparation of the recipient beds. Keratoplasty was performed with kidney-shaped transplants after trephination in free form with the guided laser beam. Postoperative clinical follow-up did not show any differences between the two trephination groups that could be related to the applied trephination technique. After 6 months we observed well-adapted and clear corneal grafts, kidney-shaped in the excimer trephination group and circular in the mechanical trephination group. No side effects on the crystalline lens and the central retina could be clinically observed following excimer laser trephination. We present the first experimental study of keratoplasty with freely selected transplant geometry and perfect congruence of donor button and recipient bed. The application of this technique in certain corneal disorders in humans will offer improved treatment options in the future.

  2. Compact Dexterous Robotic Hand

    Science.gov (United States)

    Lovchik, Christopher Scott (Inventor); Diftler, Myron A. (Inventor)

    2001-01-01

    A compact robotic hand includes a palm housing, a wrist section, and a forearm section. The palm housing supports a plurality of fingers and one or more movable palm members that cooperate with the fingers to grasp and/or release an object. Each flexible finger comprises a plurality of hingedly connected segments, including a proximal segment pivotally connected to the palm housing. The proximal finger segment includes at least one groove defining first and second cam surfaces for engagement with a cable. A plurality of lead screw assemblies each carried by the palm housing are supplied with power from a flexible shaft rotated by an actuator and output linear motion to a cable move a finger. The cable is secured within a respective groove and enables each finger to move between an opened and closed position. A decoupling assembly pivotally connected to a proximal finger segment enables a cable connected thereto to control movement of an intermediate and distal finger segment independent of movement of the proximal finger segment. The dexterous robotic hand closely resembles the function of a human hand yet is light weight and capable of grasping both heavy and light objects with a high degree of precision.

  3. Volumetric characteristics and compactability of asphalt rubber mixtures with organic warm mix asphalt additives

    Directory of Open Access Journals (Sweden)

    A. M. Rodríguez-Alloza

    2017-04-01

    Full Text Available Warm Mix Asphalt (WMA refers to technologies that reduce manufacturing and compaction temperatures of asphalt mixtures allowing lower energy consumption and reducing greenhouse gas emissions from asphalt plants. These benefits, combined with the effective reuse of a solid waste product, make asphalt rubber (AR mixtures with WMA additives an excellent environmentally-friendly material for road construction. The effect of WMA additives on rubberized mixtures has not yet been established in detail and the lower mixing/compaction temperatures of these mixtures may result in insufficient compaction. In this sense, the present study uses a series of laboratory tests to evaluate the volumetric characteristics and compactability of AR mixtures with organic additives when production/compaction temperatures are decreased. The results of this study indicate that the additives selected can decrease the mixing/compaction temperatures without compromising the volumetric characteristics and compactability.

  4. Electrothermal Defect Detection in Powder Metallurgy Compacts

    Science.gov (United States)

    Benzerrouk, Souheil; Ludwig, Reinhold; Apelian, Diran

    2006-03-01

    Faced with increasing market pressures, metal part manufacturers have turned to new processes and fabrication technologies. One of these processes is powder metallurgy (P/M), which is employed for low-cost, high-volume precision part manufacturing. Despite many advantages, the P/M process has created a number of challenges, including the need for high-speed quality assessment and control, ideally for each compact. Consequently, sophisticated quality assurance is needed to rapidly detect flaws early in the manufacturing cycle and at minimal cost. In this paper we will discuss our progress made in designing and refining an active infrared (IR) detection system for P/M compacts. After discussing the theoretical background in terms of underlying equations and boundary conditions, analytical and numerical solutions are presented that are capable of predicting temperature responses for various defect sizes and orientations of a dynamic IR testing system. Preliminary measurements with controlled and industrial samples have shown that this active IR methodology can successfully be employed to test both green-state and sintered P/M compacts. The developed system can overcome many limitations observed with a standard IR testing methodology such as emissivity, background calibration, and contact resistance.

  5. Fusion potential for spherical and compact tokamaks

    Energy Technology Data Exchange (ETDEWEB)

    Sandzelius, Mikael

    2003-02-01

    The tokamak is the most successful fusion experiment today. Despite this, the conventional tokamak has a long way to go before being realized into an economically viable power plant. In this master thesis work, two alternative tokamak configurations to the conventional tokamak has been studied, both of which could be realized to a lower cost. The fusion potential of the spherical and the compact tokamak have been examined with a comparison of the conventional tokamak in mind. The difficulties arising in the two configurations have been treated from a physical point of view concerning the fusion plasma and from a technological standpoint evolving around design, materials and engineering. Both advantages and drawbacks of either configuration have been treated relative to the conventional tokamak. The spherical tokamak shows promising plasma characteristics, notably a high {beta}-value but have troubles with high heat loads and marginal tritium breeding. The compact tokamak operates at a high plasma density and a high magnetic field enabling it to be built considerably smaller than any other tokamak. The most notable down-side being high heat loads and neutron transport problems. With the help of theoretical reactor studies, extrapolating from where we stand today, it is conceivable that the spherical tokamak is closer of being realized of the two. But, as this study shows, the compact tokamak power plant concept offers the most appealing prospect.

  6. Particle Generation by Pulsed Excimer Laser Ablation in Liquid: Hollow Structures and Laser-Induced Reactions

    Science.gov (United States)

    Yan, Zijie

    2011-12-01

    Pulsed laser ablation of solid targets in liquid media is a powerful method to fabricate micro-/nanoparticles, which has attracted much interest in the past decade. It represents a combinatorial library of constituents and interactions, and one can explore disparate regions of parameter space with outcomes that are impossible to envision a priori. In this work, a pulsed excimer laser (wavelength 248 nm, pulse width 30 ns) has been used to ablate targets in liquid media with varying laser fluences, frequencies, ablation times and surfactants. It is observed that hollow particles could be fabricated by excimer laser ablation of Al, Pt, Zn, Mg, Ag, Si, TiO2, and Nb2O5 in water or aqueous solutions. The hollow particles, with sizes from tens of nanometers to micrometers, may have smooth and continuous shells or have morphologies demonstrating that they were assembled from nanoparticles. A new mechanism has been proposed to explain the formation of these novel particle geometries. They were formed on laser-produced bubbles through bubble interface pinning by laser-produced solid species. Considering the bubble dynamics, thermodynamic and kinetic requirements have been discussed in the mechanism that can explain some phenomena associated with the formation of hollow particles, especially (1) larger particles are more likely to be hollow particles; (2) Mg and Al targets have stronger tendency to generate hollow particles; and (3) the 248 nm excimer laser is more beneficial to fabricate hollow particles in water than other lasers with longer wavelengths. The work has also demonstrated the possiblities to fabricate novel nanostructures through laser-induced reactions. Zn(OH)2/dodecyl sulfate flower-like nanostructures, AgCl cubes, and Ag2O cubes, pyramids, triangular plates, pentagonal rods and bars have been obtained via reactions between laser-produced species with water, electrolyes, or surfactant molecules. The underlying mechanisms of forming these structures have been

  7. SQL Server Compact数据同步技术在商品出库系统中的应用%Application of data synchronization technology based on SQL Server Compact to commodity outgoing system

    Institute of Scientific and Technical Information of China (English)

    史桂红

    2011-01-01

    The embedded mobile device is a kind of resources-restricted equipment, and it has the working characteristic of occasional connection. Real-time access and efficient management of mobile data have become a hot issue in embedded mobile database studies. To solve the problem of warehouse management system which can not be used offline while warehouse administrator is removing goods from storage, we study the N layer bidirectional data synchronization of Synchronization Services for ADO. NET based on SQL Server Compact 3.5. By analyzing the characteristics, the solutions of data synchronization between the embedded mobile device and server database are presented based on. Net Compact Framework ,which can meet the demand of the design in goods warehousing system.%嵌入式移动设备是一个资源受限的设备,具有偶尔连接的工作特点,如何实时获取和管理移动数据成为嵌入式移动数据库的热点问题.针对物流配送库房管理员进行商品出库作业时,桌面库房管理系统无法离线使用的问题,主要研究了SQL Server Compact3.5中的Synchronization Services for ADO.NETN层数据双向同步技术,通过分析其特,最并结合商品出库系统的设计需求,提出了嵌入式移动设备端和服务器端数据库之间进行数据同步的解决方案以及在Net Compact Framework下的实现方法.

  8. Compact Grism Spectrometer

    Science.gov (United States)

    Teare, S. W.

    2003-05-01

    Many observatories and instrument builders are retrofitting visible and near-infrared spectrometers into their existing imaging cameras. Camera designs that reimage the focal plane and have the optical filters located in a pseudo collimated beam are ideal candidates for the addition of a spectrometer. One device commonly used as the dispersing element for such spectrometers is a grism. The traditional grism is constructed from a prism that has had a diffraction grating applied on one surface. The objective of such a design is to use the prism wedge angle to select the desired "in-line" or "zero-deviation" wavelength that passes through on axis. The grating on the surface of the prism provides much of the dispersion for the spectrometer. A grism can also be used in a "constant-dispersion" design which provides an almost linear spatial scale across the spectrum. In this paper we provide an overview of the development of a grism spectrometer for use in a near infrared camera and demonstrate that a compact grism spectrometer can be developed on a very modest budget that can be afforded at almost any facility. The grism design was prototyped using visible light and then a final device was constructed which provides partial coverage in the near infrared I, J, H and K astronomical bands using the appropriate band pass filter for order sorting. The near infrared grism presented here provides a spectral resolution of about 650 and velocity resolution of about 450 km/s. The design of this grism relied on a computer code called Xspect, developed by the author, to determine the various critical parameters of the grism. This work was supported by a small equipment grant from NASA and administered by the AAS.

  9. Compact instantaneous water heater

    Energy Technology Data Exchange (ETDEWEB)

    Azevedo, Jorge G.W.; Machado, Antonio R.; Ferraz, Andre D.; Rocha, Ivan C.C. da; Konishi, Ricardo [Companhia de Gas de Santa Catarina (SCGAS), Florianopolis, SC (Brazil); Lehmkuhl, Willian A.; Francisco Jr, Roberto W.; Hatanaka, Ricardo L.; Pereira, Fernando M.; Oliveira, Amir A.M. [Universidade Federal de Santa Catarina (UFSC), Florianopolis, SC (Brazil)

    2012-07-01

    This paper presents an experimental study of combustion in an inert porous medium in a liquid heating device application. This project aims to increase efficiency in the application of natural gas in residential and commercial sectors with the use of advanced combustion and heat transfer. The goal is to facilitate the development of a high performance compact water heater allowing hot water supply for up to two simultaneous showers. The experiment consists in a cylindrical porous burner with an integrated annular water heat exchanger. The reactants were injected radially into the burner and the flame stabilizes within the porous matrix. The water circulates in a coiled pipe positioned at the center of the burner. This configuration allows for heat transfer by conduction and radiation from the solid matrix to the heat exchanger. This article presented preliminary experimental results of a new water heater based on an annular porous burner. The range of equivalence ratios tested varied from 0.65 to 0.8. The power range was varied from 3 to 5 kW. Increasing the equivalence ratio or decreasing the total power input of the burner resulted in increased thermal efficiencies of the water heater. Thermal efficiencies varying from 60 to 92% were obtained. The condition for the goal of a comfortable bath was 20 deg C for 8-12 L/min. This preliminary prototype has achieved water temperature of 11deg C for 5 L/min. Further optimizations will be necessary in order to achieve intense heating with high thermal efficiency. (author)

  10. 193 nm Excimer laser processing of Si/Ge/Si(100) micropatterns

    Science.gov (United States)

    Gontad, F.; Conde, J. C.; Chiussi, S.; Serra, C.; González, P.

    2016-01-01

    193 nm Excimer laser assisted growth and crystallization of amorphous Si/Ge bilayer patterns with circular structures of 3 μm diameter and around 25 nm total thickness, is presented. Amorphous patterns were grown by Laser induced Chemical Vapor Deposition, using nanostencils as shadow masks and then irradiated with the same laser to induce structural and compositional modifications for producing crystalline SiGe alloys through fast melting/solidification cycles. Compositional and structural analyses demonstrated that pulses of 240 mJ/cm2 lead to graded SiGe alloys with Si rich discs of 2 μm diameter on top, a buried Ge layer, and Ge rich SiGe rings surrounding each feature, as predicted by previous numerical simulation.

  11. High frequency excitation waveform for efficient operation of a xenon excimer dielectric barrier discharge lamp

    Energy Technology Data Exchange (ETDEWEB)

    Beleznai, Sz; Mihajlik, G; Richter, P [Department of Atomic Physics, Budapest University of Technology and Economics, 3-9.Muegyetem rkp., Budapest H-1111 (Hungary); Maros, I; Balazs, L, E-mail: beleznai@dept.phy.bme.h [GE Consumer and Industrial-Lighting, 77 Vaci ut, Budapest H-1344 (Hungary)

    2010-01-13

    The application of a high frequency ({approx}2.5 MHz) burst (amplitude-modulated sinusoidal) excitation voltage waveform is investigated for driving a fluorescent dielectric barrier discharge (DBD) light source. The excitation waveform presents a novel method for generating spatially stable homogeneous Xe DBD possessing a high conversion efficiency from electrical energy to VUV Xe{sub 2}{sup *} excimer radiation ({approx}172 nm), even at a significantly higher electrical energy deposition than realized by pulsed excitation. Simulation and experimental results predict discharge efficiencies around 60%. Lamp efficacy above 74 lm W{sup -1} has been achieved. VUV emission and loss mechanisms are investigated extensively and the performance of burst and pulsed waveforms is compared both theoretically and experimentally.

  12. High frequency excitation waveform for efficient operation of a xenon excimer dielectric barrier discharge lamp

    Science.gov (United States)

    Beleznai, Sz; Mihajlik, G.; Maros, I.; Balázs, L.; Richter, P.

    2010-01-01

    The application of a high frequency (~2.5 MHz) burst (amplitude-modulated sinusoidal) excitation voltage waveform is investigated for driving a fluorescent dielectric barrier discharge (DBD) light source. The excitation waveform presents a novel method for generating spatially stable homogeneous Xe DBD possessing a high conversion efficiency from electrical energy to VUV Xe_{2}^{\\ast} excimer radiation (~172 nm), even at a significantly higher electrical energy deposition than realized by pulsed excitation. Simulation and experimental results predict discharge efficiencies around 60%. Lamp efficacy above 74 lm W-1 has been achieved. VUV emission and loss mechanisms are investigated extensively and the performance of burst and pulsed waveforms is compared both theoretically and experimentally.

  13. Corneal stromal wound healing in rabbits after 193-nm excimer laser surface ablation.

    Science.gov (United States)

    Hanna, K D; Pouliquen, Y; Waring, G O; Savoldelli, M; Cotter, J; Morton, K; Menasche, M

    1989-06-01

    An argon fluoride excimer laser (193 nm) with a moving slit delivery system was used to perform anterior myopic keratomileusis in both eyes of 24 New Zealand white rabbits. Rabbits were killed immediately after ablation and at intervals up to 100 days. By slit-lamp microscopy, four rabbits at day 100 exhibited four clear corneas and four corneas had central, spotty, subepithelial haze. Light and electron microscopy documented corneal healing. In the early stages a transient acellular zone in the anterior stroma appeared over a period of three weeks, followed by an increased number of fibrocytes. In the corneas with opacification, focal areas of 20-microns-thick subepithelial scarring were present. An unexpected finding was transient damage to posterior stromal keratocytes and endothelial cells. The endothelium produced a layer of granular material that migrated anteriorly across Descemet's membrane. Immunochemistry at day 6 showed a marked staining for collagen IV, proteoglycans, fibronectin, and laminin.

  14. A comparison of en face and tangential wide-area excimer surface ablation in the rabbit.

    Science.gov (United States)

    Holme, R J; Fouraker, B D; Schanzlin, D J

    1990-06-01

    We used an argon fluoride excimer laser (193 nm) to perform anterior corneal surface ablation in New Zealand white rabbits (25 eyes) using both en face and tangential methods. We followed up the animals for 90 days using slit-lamp photography and pachymetry at predetermined intervals. We also examined selected tissues with scanning electron microscopy and transmission electron microscopy. Immediate and subsequent examinations revealed significant differences in clarity between the two groups. When viewed through slit-lamp microscopy, the rabbits undergoing the en face method exhibited hazy corneas and irregular surfaces, whereas the corneas that underwent tangential keratectomy demonstrated less haze and fewer surface irregularities. Through histologic study and electron microscopy, we corroborated this finding. At 30 days, there was a statistically significant difference in clarity between en face--treated corneas and those treated tangentially.

  15. Photosensitivity of ion-exchanged Er-doped phosphate glass using 248nm excimer laser radiation.

    Science.gov (United States)

    Pissadakis, Stavros; Ikiades, Aris; Hua, Ping; Sheridan, Anna; Wilkinson, James

    2004-07-12

    The photosensitivity to 248nm excimer laser radiation of Er-doped Schott IOG-1 phosphate glass is presented. The photosensitive mechanism is investigated by employing a grating recording process. Index changes of up to ~2.0x10(-3) were measured in silver ion-exchanged samples using diffraction efficiency measurements; whereas changes of only ~10(-5) were measured for non-ion-exchanged samples. Absorption measurements allowed the identification of specific color center bands, which were attributed to the glass matrix and to the silver ions. Investigation of the exposed ion-exchanged glass using scanning electron microscopy and energy dispersive x-ray microanalysis revealed that in addition to the color centers formed, silver ion migration and ionization contribute significantly to the UV-induced index changes.

  16. Location control of crystal grains in excimer laser crystallization of silicon thin films

    Science.gov (United States)

    Kumomi, Hideya

    2003-07-01

    Location of crystal grains in polycrystalline Si thin films formed by excimer-laser crystallization is controlled by manipulating the superlateral-growth phenomenon. The superlateral growth of a single grain occurs preferentially at an artificial site where nanometer-sized crystallites are embedded in the precursory amorphous thin films. Only a part of the crystallites embedded in the site could survive the melting and grow to serve as the seed crystal in the subsequent recrystallization. Such grain-location control provides a basis for two-dimensional control of the grain-boundary location in low-temperature polycrystalline Si thin films, which is essential to the device-to-device uniformity of high-performance thin-film transistors.

  17. Interaction of 308-nm excimer laser light with temporomandibular joint related structures

    Science.gov (United States)

    Liesenhoff, Tim; Funk, Armin

    1994-02-01

    Arthroscopy of TMJ has become a clinically important and more and more accepted method for diagnosis and treatment of TMJ alteration. This minimal invasive method is clearly limited by the anatomical dimensions of the TMJ. A 308 nm excimer laserlight has already found clinical applications in angioplasty, ophthalmology, and dentistry. The aim of the presented study was to find out if it is possible to ablate TMJ related structures under arthroscopic conditions. It also aims to evaluate the energy-threshold for ablation and the maximal possible rate of ablation. Contrary to other laser systems it offers a unique combination of minimal tissue alteration, precise tissue ablation guidability through optical fibers, and a good transmission through water.

  18. Delivery of F2-excimer laser light by aluminum hollow fibers.

    Science.gov (United States)

    Matsuura, Y; Yamamoto, T; Miyagi, M

    2000-06-19

    A hollow fiber composed of a glass-tube substrate and an aluminum thin film coated upon the inside of the tube delivers F2-excimer laser light. A smooth, aluminum thin film was deposited by using metal-organic chemical vapor deposition using dimethylethylamine:alane (DMEAA) as the precursor. It was shown that the transmission loss of the fiber with a 1.0-mm inner diameter was as low as 0.5 dB/m for the fiber with 1.0-mm diameter when the bore of the fiber is pressurized with an inert gas to remove the absorption of air. When the fiber is bent at the radius of 30 cm, the additional loss was 1.6 dB.

  19. Surface modulation of silicon surface by excimer laser at laser fluence below ablation threshold

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, P. [Jawaharlal Nehru Centre for Advanced Scientific Research, Chemistry and Physics of Materials Unit (CPMU), Bangalore, Jakkur PO (India)

    2010-04-15

    Controlled single step fabrication of silicon conical surface modulations on [311] silicon surface is reported utilizing KrF excimer laser [{lambda}=248 nm] at laser fluence below ablation threshold laser fluence. When laser fluence was increased gradually from 0 to 0.2 J/cm{sup 2} for fixed 200 numbers of shots; first nanopores are observed to form at 0.1 J/cm{sup 2}, then very shallow nanocones evolve as a function of laser fluence. At 0.2 J/cm{sup 2}, nanoparticles are observed to form. Up to 0.15 J/cm{sup 2} the very shallow nanocone volume is smaller but increases at a fast rate with laser fluence thereafter. It is observed that the net material volume before and after the laser irradiation remains the same, a sign of the melting and resolidification without any ablation. (orig.)

  20. Triple emission from p-dimethylaminobenzonitrile-cucurbit[8]uril triggers the elusive excimer emission.

    Science.gov (United States)

    Sayed, Mhejabeen; Biedermann, Frank; Uzunova, Vanya D; Assaf, Khaleel I; Bhasikuttan, Achikanath C; Pal, Haridas; Nau, Werner M; Mohanty, Jyotirmayee

    2015-01-01

    The intriguing dual-emission behavior of p- dimethylaminobenzonitrile (DMABN) and the identity of the associated excited states is, arguably, the most extensively investigated and also controversially discussed molecule- specific phenomenon of modern photochemistry. We have now found a new, third fluorescence band when DMABN is encapsulated within the water-soluble molecular container cucurbit[8]uril (CB8). It is centered between the previously observed emissions and assigned to the elusive excimer emission from DMABN through 1:2 CB8:DMABN complex formation. Heating of the CB8⋅(DMABN)2 complex from 0 to 100 °C results in the dissociation of the ternary complex and restoration of the dual-emission properties of the monomer. Alternatively, monomer emission can be obtained by selecting cucurbit[7]uril (CB7), a host homologue that is too small to accommodate two DMABN molecules, or by introducing ethyl instead of methyl groups at the amino terminus of the aminobenzonitrile guest.

  1. PMMA microstructure as KrF excimer-laser LIGA material

    Science.gov (United States)

    Yang, Chii-Rong; Chou, Bruce C. S.; Chou, Hsiao-Yu; Lin, Frank H. S.; Kuo, Wen-Kai; Luo, Roger G. S.; Chang, Jer-Wei; Wei, Z. J.

    1998-08-01

    PMMA (polymethyl methacrylate) has been widely used as x-ray LIGA material for its good features of electrical acid plating of all common metals to industrial applications. Unlike the tough characteristics of polyimide in almost all alkaline and acid solutions, PMMA is easily removed in chemical etchants after electroplating process. For this reason, ablation- etching characteristics of PMMA material for 3D microstructures fabrication using a 248 nm KrF excimer laser were investigated. Moreover, the uses of the laminated dry film were also studied in this work. Experimental results show that PMMA microstructures can produce the near-vertical side- wall profile as the laser fluence up to 2.5 J/cm2. PMMA templates with high aspect ratio of around 25 were demonstrated, and the sequential electroplating processes have realized the metallic microstructures. Moreover, the microstructures fabricated in dry film show the perfect side- wall quality, and no residues of debris were found.

  2. Excimer laser texturing of natural composite polymer surfaces for studying cell-to-substrate specific response

    Science.gov (United States)

    Dinca, V.; Alloncle, P.; Delaporte, P.; Ion, V.; Rusen, L.; Filipescu, M.; Mustaciosu, C.; Luculescu, C.; Dinescu, M.

    2015-10-01

    Surface modifications of biocompatible materials are among the main factors used for enhancing and promoting specific cellular activities (e.g. spreading, adhesion, migration, and differentiation) for various types of medical applications such as implants, microfluidic devices, or tissue engineering scaffolds. In this work an excimer laser at 193 nm was used to fabricate chitosan-collagen roughness gradients. The roughness gradients were obtained in one step by applying single laser pulses and sample tilting. Fourier transform infrared spectroscopy measurements, atomic force microscopy (AFM), scanning electron microscopy (SEM), and spectro-ellipsometry (SE) were used for sample characterization. The goal is to determine the optimal morpho-chemical characteristics of these structures for in vitro tailoring of protein adsorption and cell behavior. The response induced by the roughness gradient onto various cell lines (i.e. L 929 fibroblasts, HEP G2 hepatocytes, OLN 93 oligodendrocytes, M63 osteoblasts) and bovine serum albumin (BSA) protein absorption was investigated.

  3. In-vitro fragmentation of biliary calculi with a 308-nm excimer laser

    Science.gov (United States)

    Shi, Wei-Qiang; Papaioannou, Thanassis; Vari, Sandor G.; Daykhovsky, Leon; Grundfest, Warren S.

    1990-06-01

    We report the use of a 308 mu XeC1 exciiuer laser for- biliary stone fragnientation. The 130 nsec laser pulses are delivered through tJV grade fused silica fibers to the target stones inmiersed in normal saline solution and placed in direct contact with the fiber. Sixty biliary calculi, 20 cholesterol and 40 pigment, were fragmented in vitro. The effect of laser repetition rate, energy fluence, and fiber core size on stone fragmentation was studied. Fragmentation thresholds for biliary calculi of different compositions were measured. It was found that higher fragmentation efficiency was obtained with larger fluence, lower repetition rate and fiber of larger core. Our study suggests that the long pulse 308 nm excimer laser may be an effective device for laser lithotripsy with low threshold and good efficiency for biliary stone fragmentation.

  4. LASERS: A 223-nm KrCl excimer laser on a He—Kr—HCl mixture

    Science.gov (United States)

    Razhev, A. M.; Zhupikov, A. A.; Kargapol'tsev, E. S.

    2004-02-01

    The results of experimental studies of the parameters of a 223-nm electric-discharge KrCl excimer laser on a He—Kr—HCl mixture depending on the excitation conditions and the composition of the active gaseous medium are presented. To achieve the maximum values of the output energy and the efficiency of the KrCl laser on mixtures with buffer gaseous helium, an excitation system was used that included a circuit with an LC inverter with a high-voltage switch based on an RU-65 spark gap. An output energy of 320 mJ with an efficiency of 0.5% relative to the energy stored in the capacitors is obtained in a KrCl laser with an active medium based on the buffer He gas at a charging voltage of 30 kV. Radiation pulses with a duration of 22±1 ns and a pulse power of 15 MW are obtained.

  5. OFI rare-gas excimer amplifier for high-intensity VUV pulse generation

    Science.gov (United States)

    Katto, Masahito; Kaku, Masanori; Oda, Kazuyoshi; Kamikihara, Tadashi; Yokotani, Atsushi; Kubodera, Shoichi; Miyanaga, Noriaki; Mima, Kunioki

    2009-02-01

    We have demonstrated an argon excimer vacuum ultraviolet (VUV) amplifier at 126 nm by using the optical-field induced ionization (OFI) of argon. The gain-length product of 5.6 was achieved as a result of the optical feedback inside the amplifier with a VUV mirror. Plasma self-channeling caused by the high-intensity pump laser was simultaneously observed when the maximum gain-length product was observed. We have also optimized the output power of a subpicosecond VUV seed beam at 126 nm produced in low-pressure rare-gases as a result of the seventh harmonic nonlinear wavelength conversion of a Ti:Sapphire laser at 882 nm.

  6. Vacuum ultraviolet argon excimer laser at 126 nm excited by a high intensity laser

    Science.gov (United States)

    Kaku, Masanori; Harano, Shinya; Katto, Masahito; Kubodera, Shoichi

    2010-09-01

    We have observed the optical amplification of the Ar2* excimer at 126 nm pumped by optical-field-induced ionization (OFI) caused by an infrared high-intensity laser. We have evaluated similar small signal gain coefficients of approximately 1.0 cm-1 in two different experiments, where OFI Ar plasmas as gain media were produced in free space filled with Ar and inside an Ar-filled hollow fiber. This indicates that the function of a hollow fiber was to guide the infrared excitation laser and VUV Ar2* emissions, and not to regulate the OFI plasma. Despite the gain coefficient value at 126 nm, the laser oscillation has not been observed. This was limited by the optical quality of available state-of-the-art vacuum ultraviolet optics.

  7. A compact tritium AMS system

    Energy Technology Data Exchange (ETDEWEB)

    Chiarappa, M L; Dingley, K H; Hamm, R W; Love, A H; Roberts, M L

    1999-09-23

    Tritium ({sup 3}H) is a radioisotope that is extensively utilized in biological and environmental research. For biological research, {sup 3}H is generally quantified by liquid scintillation counting requiring gram-sized samples and counting times of several hours. For environmental research, {sup 3}H is usually quantified by {sup 3}He in-growth which requires gram-sized samples and in-growth times of several months. In contrast, provisional studies at LLNL's Center for Accelerator Mass Spectrometry have demonstrated that Accelerator Mass Spectrometry (AMS) can be used to quantify {sup 3}H in milligram-sized biological samples with a 100 to 1000-fold improvement in detection limits when compared to scintillation counting. This increased sensitivity is expected to have great impact in the biological and environmental research community. However in order to make the {sup 3}H AMS technique more broadly accessible, smaller, simpler, and less expensive AMS instrumentation must be developed. To meet this need, a compact, relatively low cost prototype {sup 3}H AMS system has been designed and built based on a LLNL ion source/sample changer and an AccSys Technology, Inc. Radio Frequency Quadrupole (RFQ) linac. With the prototype system, {sup 3}/{sup 1}H ratios ranging from 1 x 10{sup -10} to 1 x 10{sup -13} have to be measured from milligram sized samples. With improvements in system operation and sample preparation methodology, the sensitivity limit of the system is expected to increase to approximately 1 x 10{sup -15}.

  8. THE EXPERIENCE OF TREGALOZA BASED LUBRICANT USAGE FOR PATIENTS WHO UNDERWENT EXCIMER LASER SURGERY

    Directory of Open Access Journals (Sweden)

    E. Eskina

    2016-01-01

    Full Text Available Purpose: to evaluate the tregalose based eye drops effectiveness in patients who underwent PRK or TransPRK surgery. patients and methods: 50 patients with moderate myopia were examined before, 7 days and 1 month after PRK or TransPRK surgery made by SCHWIND Amaris excimer laser by the same surgeon. In addition to conventional diagnostics, Schirmer test and tear break up time were performed as well as ODSI questionare and Oxford index of ocular surface disorders were investigated. Patients were divided in two groups, Study group — “Thealos” group and “Control” group. In both groups patients have started using non preservative eye drops based on tregalosa and hyaluronic acid 4-th day after surgery respectively. results: The tear film breakup time was significantly better in “Thealos” group (7,22±3,61 sec 7 days postop and 9,36±3,68 sec 1 month postop in comparison to «Control” group 5,21±0,25 (р<0,01 sec and 7,21±2,85 sec respectively (р<0,05 as well as ocular surface index score in “Thealos” group post surgery was less (0,26±0,38 и 0,85±0,31 marks 7 days postop (р<0,05 and 0,09±0,19 and 0,21±0,4 (р<0,05 1 month postop respectively. There were no other statistically significant differences found in analysed data. Conclusion: Using of “Thealoz” non-preservative eye drops leads to faster recovery after surface excimer laser ablations in terms of dry eye manifestation, those as tearfilm stability and ocular surface index score, measured using “Oxford” scale. Moistening properties of tregaloze solution could be compared with those of hyaluronic acid solution.

  9. Eye-Tracker-Guided Non-Mechanical Excimer Laser Assisted Penetrating Keratoplasty

    Directory of Open Access Journals (Sweden)

    Achim Langenbucher

    2013-03-01

    Full Text Available Purpose: The purpose of the study was to implement a new eye tracking mask which could be used to guide the laser beam in automated non-mechanical excimer laser assisted penetrating keratoplasty. Materials and methods: A new trephination mask design with an elevated surface geometry has been proposed with a step formation between conical and flat interfaces. Two recipient masks of 7.5/8.0 mm have been manufactured and tested. The masks have outer diameter of 12.5 mm, step formation at 10.5 mm, and slope of conical surfaces 15°. Its functionality has been tested in different lateral positions and tilts on a planar surface, and pig eye experiments. After successful validation on porcine eyes, new masks have been produced and tested on two patients. Results: The build-in eye tracking software of the MEL 70 was always able to capture the masks. It has been shown that the unwanted pigmentation/pattern induced by the laser pulses on the mask surface does not influence the eye-tracking efficiency. The masks could be tracked within the 18 × 14 mm lateral displacement and up to 12° tilt. Two patient cases are demonstrated. No complications were observed during the surgery, although it needs some attention for aligning the mask horizontally before trephination. Stability of eye tracking masks is emphasized by inducing on purpose movements of the patient head. Conclusion: Eye-tracking-guided penetrating keratoplasty was successfully applied in clinical practice, which enables robust tracking criteria within an extended range. It facilitates the automated trephination procedure of excimer laser-assisted penetrating keratoplasty.

  10. Eye-Tracker-Guided Non-Mechanical Excimer Laser Assisted Penetrating Keratoplasty

    Science.gov (United States)

    Janunts, Edgar; Schirra, Frank; Szentmáry, Nora; Seitz, Berthold; Langenbucher, Achim

    2013-01-01

    Purpose: The purpose of the study was to implement a new eye tracking mask which could be used to guide the laser beam in automated non-mechanical excimer laser assisted penetrating keratoplasty. Materials and methods: A new trephination mask design with an elevated surface geometry has been proposed with a step formation between conical and flat interfaces. Two recipient masks of 7.5/8.0 mm have been manufactured and tested. The masks have outer diameter of 12.5 mm, step formation at 10.5 mm, and slope of conical surfaces 15°. Its functionality has been tested in different lateral positions and tilts on a planar surface, and pig eye experiments. After successful validation on porcine eyes, new masks have been produced and tested on two patients. Results: The build-in eye tracking software of the MEL 70 was always able to capture the masks. It has been shown that the unwanted pigmentation/pattern induced by the laser pulses on the mask surface does not influence the eye-tracking efficiency. The masks could be tracked within the 18 × 14 mm lateral displacement and up to 12° tilt. Two patient cases are demonstrated. No complications were observed during the surgery, although it needs some attention for aligning the mask horizontally before trephination. Stability of eye tracking masks is emphasized by inducing on purpose movements of the patient head. Conclusion: Eye-tracking-guided penetrating keratoplasty was successfully applied in clinical practice, which enables robust tracking criteria within an extended range. It facilitates the automated trephination procedure of excimer laser-assisted penetrating keratoplasty. PMID:23507821

  11. Pre-operative therapeutic eyelid hygiene in the prevention of complications following excimer laser vision correction

    Directory of Open Access Journals (Sweden)

    V. V. Kurenkov

    2014-07-01

    Full Text Available Purpose: to assess the effectiveness of pre-operative therapeutic eyelid hygiene in the prevention and treatment of dry eye and meibomian glands dysfunction following excimer laser vision surgery.Methods: In enrolled 144 patients (288 eyes, ocular surface and meibomian glands functions were evaluated before and following refractive surgery (LASIK and REIK. In pre- and post-operative period, standard ophthalmological studies were performed, including best-corrected visual acuity determination, biomicroscopy, Schirmer’s test and Norn’s test (tear break-up time. In pre-operative pe- riod, ocular surface microbial profile was assessed. Subjective symptoms of impaired tear production were revealed via questioning. In study group (70 patients, 140 eyes, therapeutic eyelid hygiene using Blefarogel 1 or Blefarogel 2 (Ltd. Heltec-Medica, Moscow, Russia was prescribed one week before surgery. In control group, no therapeutic eyelid hygiene was prescribed. All patients were received antibacterial treatment including Vigamox (Alcon, Fort Worth, tX. In both groups, Natural tears and Systane Ultra (Alcon were used as tear replacement therapy.Results: Complex treatment, including therapeutic eyelid hygiene in study group, significantly improved tear film and ocular sur- face health as well as meibomian glands functions. Inflammatory complications rate was estimated as 5.7% in study group and 10.6% in control group.Conclusion: therapeutic eyelid hygiene is highly effective in the prophylaxis and treatment of post-operative complications duу to ocular surface pathology and meibomian glands dysfunction. the procedure is safe and can be recommended as a part of complex preventive treatment before excimer laser vision correction.

  12. Pre-operative therapeutic eyelid hygiene in the prevention of complications following excimer laser vision correction

    Directory of Open Access Journals (Sweden)

    V. V. Kurenkov

    2012-01-01

    Full Text Available Purpose: to assess the effectiveness of pre-operative therapeutic eyelid hygiene in the prevention and treatment of dry eye and meibomian glands dysfunction following excimer laser vision surgery.Methods: In enrolled 144 patients (288 eyes, ocular surface and meibomian glands functions were evaluated before and following refractive surgery (LASIK and REIK. In pre- and post-operative period, standard ophthalmological studies were performed, including best-corrected visual acuity determination, biomicroscopy, Schirmer’s test and Norn’s test (tear break-up time. In pre-operative pe- riod, ocular surface microbial profile was assessed. Subjective symptoms of impaired tear production were revealed via questioning. In study group (70 patients, 140 eyes, therapeutic eyelid hygiene using Blefarogel 1 or Blefarogel 2 (Ltd. Heltec-Medica, Moscow, Russia was prescribed one week before surgery. In control group, no therapeutic eyelid hygiene was prescribed. All patients were received antibacterial treatment including Vigamox (Alcon, Fort Worth, tX. In both groups, Natural tears and Systane Ultra (Alcon were used as tear replacement therapy.Results: Complex treatment, including therapeutic eyelid hygiene in study group, significantly improved tear film and ocular sur- face health as well as meibomian glands functions. Inflammatory complications rate was estimated as 5.7% in study group and 10.6% in control group.Conclusion: therapeutic eyelid hygiene is highly effective in the prophylaxis and treatment of post-operative complications duу to ocular surface pathology and meibomian glands dysfunction. the procedure is safe and can be recommended as a part of complex preventive treatment before excimer laser vision correction.

  13. Technology.

    Science.gov (United States)

    Online-Offline, 1998

    1998-01-01

    Focuses on technology, on advances in such areas as aeronautics, electronics, physics, the space sciences, as well as computers and the attendant progress in medicine, robotics, and artificial intelligence. Describes educational resources for elementary and middle school students, including Web sites, CD-ROMs and software, videotapes, books,…

  14. Compact, Ultrasensitive Formaldehyde Monitor Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Small Business Innovative Research Phase II proposal seeks to develop a compact UV laser ?based sensor for Earth science and planetary atmosphere exploration....

  15. Countably determined compact abelian groups

    CERN Document Server

    Dikranjan, Dikran

    2008-01-01

    For an abelian topological group G let G^* be the dual group of all continuous characters endowed with the compact open topology. A subgroup D of G determines G if the restriction homomorphism G^* --> D^* of the dual groups is a topological isomorphism. Given a scattered compact subset X of an infinite compact abelian group G such that |X|compact abelian group determined by its countable subgroup must be metrizable. This gives a negative answer to questions of Comfort, Hernandez, Macario, Raczkowski and Trigos-Arrieta, as well as provides short proofs of main results established in three manuscripts by these authors.

  16. Compact energy conversion module Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This STTR project delivers a compact vibration-based Energy Conversion Module (ECM) that powers sensors for purposes like structural health monitoring (SHM). NASA...

  17. What Is Business's Social Compact?

    Science.gov (United States)

    Avishai, Bernard

    1994-01-01

    Under the "new" social compact, businesses must focus on continuous learning and thus have both an obligation to support teaching and an opportunity to profit from it. Learning organizations must also be teaching organizations. (SK)

  18. What Is Business's Social Compact?

    Science.gov (United States)

    Avishai, Bernard

    1994-01-01

    Under the "new" social compact, businesses must focus on continuous learning and thus have both an obligation to support teaching and an opportunity to profit from it. Learning organizations must also be teaching organizations. (SK)

  19. Compact, Airborne Multispecies Sensor Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Small Business Innovative Research Phase I proposal seeks to develop a compact mid-infrared laser spectrometer to benefit Earth science research activities. To...

  20. Development of Self-Compacting Eco-Concrete

    NARCIS (Netherlands)

    Hunger, Martin; Brouwers, H.J.H.

    2006-01-01

    Ever since its introduction and increasingly widespread use since the early nineties, new mix design methods of Self-Compacting Concrete (SCC) can hardly be recognized. Despite intensive research and a substantial number of publications in this new technology the design concept still mainly follows

  1. Compact X-ray Light Source Workshop Report

    Energy Technology Data Exchange (ETDEWEB)

    Thevuthasan, Suntharampillai; Evans, James E.; Terminello, Louis J.; Koppenaal, David W.; Manke, Kristin L.; Plata, Charity

    2012-12-01

    This report, produced jointly by EMSL and FCSD, is the result of a workshop held in September 2011 that examined the utility of a compact x-ray light source (CXLS) in addressing many scientific challenges critical to advancing energy science and technology.

  2. Compact reactor/ORC power source

    Energy Technology Data Exchange (ETDEWEB)

    Meier, K.L.; Kirchner, W.L.; Willcutt, G.J.

    1986-01-01

    A compact power source that combines an organic Rankine Cycle (ORC) electric generator with a nuclear reactor heat source is being designed and fabricated. Incorporating existing ORC technology with proven reactor technology, the compact reactor/ORC power source offers high reliability while minimizing the need for component development. Thermal power at 125 kWt is removed from the coated particle fueled, graphite moderated reactor by heat pipes operating at 500/sup 0/C. Outside the reactor vessel and connected to the heat pipes are vaporizers in which the toluene ORC working fluid is heated to 370/sup 0/C. In the turbine-alternator-pump (TAP) combined-rotating unit, the thermal energy of the toluene is converted to 25 kWe of electric power. Lumped parameter systems analyses combined with a finite element thermal analysis have aided in the power source design. The analyses have provided assurance of reliable multiyear normal operation as well as full power operation with upset conditions, such as failed heat pipes and inoperative ORC vaporizers. Because of inherent high reliability, long life, and insensitivity to upset conditions, this power source is especially suited for use in remote, inaccessible locations where fuel delivery and maintenance costs are high. 10 refs.

  3. Compact wavefunctions from compressed imaginary time evolution

    CERN Document Server

    McClean, Jarrod R

    2014-01-01

    Simulation of quantum systems promises to deliver physical and chemical predictions for the frontiers of technology. Unfortunately, the exact representation of these systems is plagued by the exponential growth of dimension with the number of particles, or colloquially, the curse of dimensionality. The success of approximation methods has hinged on the relative simplicity of physical systems with respect to the exponentially complex worst case. Exploiting this relative simplicity has required detailed knowledge of the physical system under study. In this work, we introduce a general and efficient black box method for many-body quantum systems that utilizes technology from compressed sensing to find the most compact wavefunction possible without detailed knowledge of the system. It is a Multicomponent Adaptive Greedy Iterative Compression (MAGIC) scheme. No knowledge is assumed in the structure of the problem other than correct particle statistics. This method can be applied to many quantum systems such as spi...

  4. Development of compact accelerator neutron source

    Directory of Open Access Journals (Sweden)

    Letourneau Alain

    2017-01-01

    Full Text Available There is a worldwide growing interest for small-scale and reduced-cost neutron sources not based on nuclear fission. High-intensity proton or deuteron beams impinging on light materials could be used to produce such neutron sources with intensities or brightness comparable to nuclear reactor for dedicated experiments. To develop such technologies several key technological issues have to be addressed. Among them the neutron production and the maximization of the neutron extraction and transport to the instrument is a key parameter for the design of high-brightness sources adapted for the required application. This issue have to be addressed with validated and predictive Monte-Carlo simulations. In this paper we present preliminary results on the use of Geant4 in the context of Compact Accelerator based Neutron Source (CANS developments.

  5. Measurement and Spatial Distribution of Urban Agglomeration Industrial Compactness in China

    Institute of Scientific and Technical Information of China (English)

    QI Weifeng; FANG Chuanglin; SONG Jitao

    2008-01-01

    Urban agglomeration (UA) compactness means spatial concentration degree of physical entities, such as cities (towns), industries, resources, funds, traffic and technologies, whose concentration is formed according to speci-fied economic and technologic association in the process of UA formation and development. The UA industrial com-pactness means the concentration degree of industry and industry clusters with reference to the industrial, technologi-cal and economic relations among the cities in the UA in the process of rational industrial division and with the exten-sion of industrial chain. After analyzing the researches on compactness, this paper finds that the relevant measurement coefficient and methods reflecting industrial geographical concentration fail to link industries spatial concentration with urban spatial concentration. Taking 23 UAs as samples and classifying them by development degree, this paper probes into UA compactness and spatial distribution characteristics from the perspective of industry by adopting UA index systems of industry and measurement models. The research finds out: 1) there is obvious positive correlation between UA industrial compactness and UA development degree; 2) the spatial distribution difference of UA industrial compactness is relatively great; and 3) UA industrial compactness shows a gradually decreasing tendency from the eastern part, the middle part to the western part of China. From the research thoughts and approaches, this article sug-gests that studies on the UA integrated compactness measurement should be enhanced from a multidimensional per-spective involving space, traffic, population density and so on.

  6. Directional Oscillations, Concentrations, and Compensated Compactness via Microlocal Compactness Forms

    Science.gov (United States)

    Rindler, Filip

    2015-01-01

    This work introduces microlocal compactness forms (MCFs) as a new tool to study oscillations and concentrations in L p -bounded sequences of functions. Decisively, MCFs retain information about the location, value distribution, and direction of oscillations and concentrations, thus extending at the same time the theories of (generalized) Young measures and H-measures. In L p -spaces oscillations and concentrations precisely discriminate between weak and strong compactness, and thus MCFs allow one to quantify the difference in compactness. The definition of MCFs involves a Fourier variable, whereby differential constraints on the functions in the sequence can also be investigated easily—a distinct advantage over Young measure theory. Furthermore, pointwise restrictions are reflected in the MCF as well, paving the way for applications to Tartar's framework of compensated compactness; consequently, we establish a new weak-to-strong compactness theorem in a "geometric" way. After developing several aspects of the abstract theory, we consider three applications; for lamination microstructures, the hierarchy of oscillations is reflected in the MCF. The directional information retained in an MCF is harnessed in the relaxation theory for anisotropic integral functionals. Finally, we indicate how the theory pertains to the study of propagation of singularities in certain systems of PDEs. The proofs combine measure theory, Young measures, and harmonic analysis.

  7. Compactness in intuitionistic fuzzy topological spaces

    Directory of Open Access Journals (Sweden)

    S. E. Abbas

    2005-02-01

    Full Text Available We introduce fuzzy almost continuous mapping, fuzzy weakly continuous mapping, fuzzy compactness, fuzzy almost compactness, and fuzzy near compactness in intuitionistic fuzzy topological space in view of the definition of Å ostak, and study some of their properties. Also, we investigate the behavior of fuzzy compactness under several types of fuzzy continuous mappings.

  8. Compact Intracloud Discharges

    Energy Technology Data Exchange (ETDEWEB)

    Smith, David A. [Univ. of Colorado, Boulder, CO (United States)

    1998-11-01

    In November of 1993, mysterious signals recorded by a satellite-borne broadband VHF radio science experiment called Blackboard led to a completely unexpected discovery. Prior to launch of the ALEXIS satellite, it was thought that its secondary payload, Blackboard, would most often detect the radio emissions from lightning when its receiver was not overwhelmed by noise from narrowband communication carriers. Instead, the vast majority of events that triggered the instrument were isolated pairs of pulses that were one hundred times more energetic than normal thunderstorm electrical emissions. The events, which came to be known as TIPPs (for transionospheric pulse pairs), presented a true mystery to the geophysics community. At the time, it was not even known whether the events had natural or anthropogenic origins. After two and one half years of research into the unique signals, two ground-based receiver arrays in New Mexico first began to detect and record thunderstorm radio emissions that were consistent with the Blackboard observations. On two occasions, the ground-based systems and Blackboard even recorded emissions that were produced by the same exact events. From the ground based observations, it has been determined that TIPP events areproduced by brief, singular, isolated, intracloud electrical discharges that occur in intense regions of thunderstorms. These discharges have been dubbed CIDS, an acronym for compact intracloud discharges. During the summer of 1996, ground-based receiver arrays were used to record the electric field change signals and broadband HF emissions from hundreds of CIDS. Event timing that was accurate to within a few microseconds made possible the determination of source locations using methods of differential time of arrival. Ionospheric reflections of signals were recorded in addition to groundwave/line-of-sight signals and were used to determine accurate altitudes for the discharges. Twenty-four CIDS were recorded from three

  9. Development of a Silicon Based Electron Beam Transmission Window for Use in a KrF Excimer Laser System

    CERN Document Server

    Gentile, C A; Hartfield, J W; Hawryluk, R J; Hegeler, F; Heitzenroeder, P J; Jun, C H; Ku, L P; Lamarche, P H; Myers, M C; Parker, J J; Parsells, R F; Payen, M; Raftopoulos, S; Sethian, J D

    2002-01-01

    The Princeton Plasma Physics Laboratory (PPPL), in collaboration with the Naval Research Laboratory (NRL), is currently investigating various novel materials (single crystal silicon, , and ) for use as electron-beam transmission windows in a KrF excimer laser system. The primary function of the window is to isolate the active medium (excimer gas) from the excitation mechanism (field-emission diodes). Chosen window geometry must accommodate electron energy transfer greater than 80% (750 keV), while maintaining structural integrity during mechanical load (1.3 to 2.0 atm base pressure differential, approximate 0.5 atm cyclic pressure amplitude, 5 Hz repetition rate) and thermal load across the entire hibachi area (approximate 0.9 W centre dot cm superscript ''-2''). In addition, the window must be chemically resistant to attack by fluorine free-radicals (hydrofluoric acid, secondary). In accordance with these structural, functional, and operational parameters, a 22.4 mm square silicon prototype window, coated w...

  10. Krypton Gas for High Quality Single Wall Carbon Nanotubes Synthesis by KrF Excimer Laser Ablation

    Directory of Open Access Journals (Sweden)

    Jasim Al-Zanganawee

    2015-01-01

    Full Text Available We report for the first time the production of single wall carbon nanotubes (SWCNTs by KrF excimer laser ablation method under the krypton gas atmosphere. For the ablation experiment 450 mJ energy and 30 Hz repetition rate KrF excimer laser was used, and the target was prepared with the following composition: 0.6% Ni, 0.6% Co, and 98.8% C (atomic percentage. The ablation product was characterized by confocal Raman microspectroscopy, transmission electron microscopy (TEM, scanning electron microscopy (SEM, and thermogravimetric analysis (TGA. The SWCNTs obtained are a mixture of semiconducting and metallic types with narrow diameters distribution of 1.26 to 1.49 nm, are micrometers long, and contain low amount of graphite and amorphous carbon.

  11. Excimer formation in inclusion complexes of β-cyclodextrin with salbutamol, sotalol and atenolol: Spectral and molecular modeling studies

    Science.gov (United States)

    Antony Muthu Prabhu, A.; Subramanian, V. K.; Rajendiran, N.

    2012-10-01

    The inclusion complexation behavior of salbutamol, sotalol and atenolol drugs with β-cyclodextrin (β-CD) were investigated by UV-visible, fluorometry, time resolved fluorescence, FT-IR, 1H NMR, SEM and PM3 methods. The above drugs gave a single emission maximum in water where as dual emission in β-CD. In β-CD solutions the shorter wavelength fluorescence intensity was regularly decreased and longer wavelength fluorescence intensity increased. Addition of β-CD to aqueous solutions of drugs resulted into excimer emission. The excimer emission is concluded to be due to a 1:2 inclusion complex between β-CD and drug. Nanosecond time-resolved studies indicated that all drugs exhibited biexponential decay in solvents and triexponential decay in CD. Investigations of thermodynamic and electronic properties confirmed the stability of the inclusion complex.

  12. The Construction of Finer Compact Topologies

    OpenAIRE

    2005-01-01

    It is well known that each locally compact strongly sober topology is contained in a compact Hausdorff topology; just take the supremum of its topology with its dual topology. On the other hand, examples of compact topologies are known that do not have a finer compact Hausdorff topology. This led to the question (first explicitly formulated by D.E. Cameron) whether each compact topology is contained in a compact topology with respect to which all compact sets are closed. (For the obvious r...

  13. Compactly convex sets in linear topological spaces

    CERN Document Server

    Banakh, T; Ravsky, O

    2012-01-01

    A convex subset X of a linear topological space is called compactly convex if there is a continuous compact-valued map $\\Phi:X\\to exp(X)$ such that $[x,y]\\subset\\Phi(x)\\cup \\Phi(y)$ for all $x,y\\in X$. We prove that each convex subset of the plane is compactly convex. On the other hand, the space $R^3$ contains a convex set that is not compactly convex. Each compactly convex subset $X$ of a linear topological space $L$ has locally compact closure $\\bar X$ which is metrizable if and only if each compact subset of $X$ is metrizable.

  14. Technology

    Directory of Open Access Journals (Sweden)

    Xu Jing

    2016-01-01

    Full Text Available The traditional answer card reading method using OMR (Optical Mark Reader, most commonly, OMR special card special use, less versatile, high cost, aiming at the existing problems proposed a method based on pattern recognition of the answer card identification method. Using the method based on Line Segment Detector to detect the tilt of the image, the existence of tilt image rotation correction, and eventually achieve positioning and detection of answers to the answer sheet .Pattern recognition technology for automatic reading, high accuracy, detect faster

  15. Preparation of Oxide Films by Excimer Laser Deposition%准分子激光淀积氧化物薄膜

    Institute of Scientific and Technical Information of China (English)

    王金波; 张鹏翔

    2001-01-01

    Since a high temperature superconducting thin film was first prepared by Bell Labs using pulsed laser in 1987, the technique of pulsed laser deposition has been developed rapidly. Today this technique is one of the best methods to prepare thin films. We will briefly review the principle of excimer laser and pulsed laser deposition, typical technology oxides and advantages.%自1987年贝尔实验室首次用脉冲准分子激光制备出高温超导薄膜以来,脉冲激光淀积技术已得到了蓬勃发展,现在已成为最好的薄膜制备技术之一.本文简要介绍了准分子激光的原理、 PLD的原理以及用准分子激光脉冲淀积氧化物薄膜的工艺及其所表现的诸多优势.

  16. Low temperature high-mobility InZnO thin-film transistors fabricated by excimer laser annealing

    NARCIS (Netherlands)

    Fujii, M.; Ishikawa, Y.; Ishihara, R.; Van der Cingel, J.; Mofrad, M.R.T.; Horita, M.; Uraoka, Y.

    2013-01-01

    In this study, we successfully achieved a relatively high field-effect mobility of 37.7 cm2/Vs in an InZnO thin-film transistor (TFT) fabricated by excimer layer annealing (ELA). The ELA process allowed us to fabricate such a high-performance InZnO TFT at the substrate temperature less than 50 °C ac

  17. Corneal haze induced by excimer laser photoablation in rabbits is reduced by preserved human amniotic membrane graft

    Science.gov (United States)

    Wang, Ming X.; Gray, Trevor; Prabhasawat, Pinnita; Ma, Xiong; Culbertson, William; Forster, Richard; Hanna, Khalil; Tseng, Scheffer C. G.

    1998-06-01

    We conducted a study to determine if preserved human amniotic membrane can reduce corneal haze induced by excimer laser photoablation. Excimer photoablation was performed bilaterally on 40 New Zealand white rabbits with a 6 mm ablation zone and 120 micrometer depth (PTK) using the VISX Star. One eye was randomly covered with a preserved human amniotic membrane and secured using four interrupted 10 - 0 nylon sutures; the other eye served as control. The amniotic membranes were removed at one week, and the corneal haze was graded with a slit-lamp biomicroscopy by three masked corneal specialists (WC, KH and RF) biweekly for the ensuing 12 weeks. Histology and in situ TUNEL staining (for fragmented DNA as an index for apoptosis) was performed at days 1, 3 and 7 and at 12 weeks. One week after excimer photoablation, the amniotic membrane-covered corneas showed more anterior stromal edema, which resolved at the second week. A consistent grading of organized reticular corneal haze was noted among the three masked observers. Such corneal haze peaked at the seventh week in both groups. The amniotic membrane-covered group showed statistically significant less corneal haze (0.50 plus or minus 0.15) than the control groups (1.25 plus or minus 0.35) (p less than 0.001). The amniotic membrane-covered corneas had less inflammatory response at days 1 and 3, showing nearly nil DNA fragmentation on keratocytes on the ablated anterior stromal and less stromal fibroblast activation. There is less altered epithelial cell morphology and less epithelial hyperplasia at 1 week in these amniotic membrane-treated eyes. We concluded from this study that amniotic membrane matrix is effective in reducing corneal haze induced by excimer photoablation in rabbits and may have clinical applications.

  18. Viral RNAs are unusually compact.

    Directory of Open Access Journals (Sweden)

    Ajaykumar Gopal

    Full Text Available A majority of viruses are composed of long single-stranded genomic RNA molecules encapsulated by protein shells with diameters of just a few tens of nanometers. We examine the extent to which these viral RNAs have evolved to be physically compact molecules to facilitate encapsulation. Measurements of equal-length viral, non-viral, coding and non-coding RNAs show viral RNAs to have among the smallest sizes in solution, i.e., the highest gel-electrophoretic mobilities and the smallest hydrodynamic radii. Using graph-theoretical analyses we demonstrate that their sizes correlate with the compactness of branching patterns in predicted secondary structure ensembles. The density of branching is determined by the number and relative positions of 3-helix junctions, and is highly sensitive to the presence of rare higher-order junctions with 4 or more helices. Compact branching arises from a preponderance of base pairing between nucleotides close to each other in the primary sequence. The density of branching represents a degree of freedom optimized by viral RNA genomes in response to the evolutionary pressure to be packaged reliably. Several families of viruses are analyzed to delineate the effects of capsid geometry, size and charge stabilization on the selective pressure for RNA compactness. Compact branching has important implications for RNA folding and viral assembly.

  19. Laser technologies in ophthalmic surgery

    Science.gov (United States)

    Atezhev, V. V.; Barchunov, B. V.; Vartapetov, S. K.; Zav'yalov, A. S.; Lapshin, K. E.; Movshev, V. G.; Shcherbakov, I. A.

    2016-08-01

    Excimer and femtosecond lasers are widely used in ophthalmology to correct refraction. Laser systems for vision correction are based on versatile technical solutions and include multiple hard- and software components. Laser characteristics, properties of laser beam delivery system, algorithms for cornea treatment, and methods of pre-surgical diagnostics determine the surgical outcome. Here we describe the scientific and technological basis for laser systems for refractive surgery developed at the Physics Instrumentation Center (PIC) at the Prokhorov General Physics Institute (GPI), Russian Academy of Sciences.

  20. Combined Excimer Laser Photoablation and Amniotic Membrane Overlay for Relief of Symptomatic Discomfort in Gelatinous Drop-like Corneal Dystrophy.

    Science.gov (United States)

    Alex, Anne F; Eter, Nicole; Uhlig, Constantin E

    2015-10-01

    To describe the efficacy of combined excimer laser photoablation and amniotic overlay membrane in the relief of symptomatic discomfort in a 17-year-old patient who had gelatinous drop-like corneal dystrophy. The best-corrected visual acuity (BCVA) was measured with Snellen letters. Slit-lamp examination of the ocular surface and anterior chamber was performed at baseline. Results were photodocumented. Excimer laser photoablation was performed and subsequently 2 amniotic membranes were transconjunctivally fixated with 10.0 nylon sutures. Investigations and documentation were performed at baseline, every 2 months in the first year, and then every 6 months. The duration of follow-up was 22 months. At baseline, the BCVA was 20/70 in the right eye and 20/200 in the left eye. The patient reported distinct photophobia. Slit-lamp examination was difficult because of blepharospasm. Although gelatinous drops developed again and the BCVA decreased to 2/200, the patient reported significant relief after both microsurgical treatments and remained comfortable at 20 and 22 months. Excimer laser photocoagulation combined with amniotic membrane overlay does not stop the development of gelatinous drop-like corneal dystrophy but may improve subjective comfort. Such treatment does not hinder subsequent lamellar or penetrating grafts and is helpful in providing the necessary time for preparation of matched keratoplasties.

  1. Excimer laser-assisted retrieval of Günther Tulip vena cava filters: a pilot study in a canine Model.

    Science.gov (United States)

    Saito, Naritatsu; Shimamoto, Takeshi; Takeda, Takahide; Marui, Akira; Kimura, Takeshi; Ikeda, Tadashi; Sakata, Ryuzo

    2010-05-01

    Although most Günther Tulip filters (GTFs) can be safely retrieved within a few months after implantation, their recommended safe retrieval period is within a few weeks. This study aims to assess the feasibility of excimer laser-assisted retrieval of GTFs incorporated into the inferior vena cava (IVC) wall in a canine model. Six GTFs were implanted in six mongrel dogs and retrieved after four weeks. The retrieval system consisted of a 14-F excimer laser sheath, an 8-F guide catheter, and a 15-mm Goose Neck snare. All filters were tightly fixed to the IVC wall. After ablation of the adhesions by excimer laser emission, all filters were successfully retrieved. Final cavography after retrieval revealed no caval damage except for minor extravasation in three dogs. Examination of the caval specimen taken from a dog immediately after filter retrieval revealed partial absence of the intima and media. In the remaining five dogs, cavography performed 2 days after filter retrieval revealed complete hemostasis and almost indistinguishable intimal indentations. On follow-up cavography 28 days after filter retrieval, caval stenosis with 38% +/- 11% diameter narrowing was noted. The caval specimen obtained from a dog at 28 days showed neointima formation at the level where the filter struts were in contact with the caval wall. The other four dogs have survived for more than 3 months without any adverse events. Laser-assisted retrieval of a GTF incorporated into the IVC wall is feasible in dogs.

  2. Labeling-free fluorescent detection of DNA hybridization through FRET from pyrene excimer to DNA intercalator SYBR green I.

    Science.gov (United States)

    Zhou, Ruyi; Xu, Chen; Dong, Jie; Wang, Guojie

    2015-03-15

    A novel labeling-free fluorescence complex probe has been developed for DNA hybridization detection based on fluorescence resonance energy transfer (FRET) mechanism from pyrene excimer of pyrene-functionalized poly [2-(N, N-dimethylamino) ethyl methacrylate] (PFP) to SYBR Green I (SG, a specific intercalator of double-stranded DNA) in a cost-effective, rapid and simple manner. The complex probe consists of the positively charged PFP, SG and negatively charged single-stranded DNA (ssDNA). Upon adding a complementary strand to the complex probe solution, double-stranded DNA (dsDNA) was formed, followed by the intercalation of SG into dsDNA. The pyrene excimer emission was overlapped with the absorption of SG very well and the electrostatic interactions between PFP and dsDNA kept them in close proximity, enabling efficient FRET from pyrene excimer to SG. The fluorescence of SG in the duplex DNA resulting from FRET can be successfully applied to detect DNA hybridization with high sensitivity for a very low detection limit of 10nM and excellent selectivity for detection of single base pair mismatch. Copyright © 2014 Elsevier B.V. All rights reserved.

  3. Comparative study of efficacy of excimer light therapy vs intralesional triamcinolone vs topical 5% minoxidil: an observational study

    Directory of Open Access Journals (Sweden)

    Zonunsanga

    2015-01-01

    Full Text Available Introduction: Alopecia Areota is a chronic inflammatory disease that involves hair follicles, and sometimes nails, caused by T-cell mediated autoimmune mechanism. Current treatment modalities includes corticosteroids (oral, topical or intralesional, Minoxidil, Contact sensitizers like DNCB, DPCP and SADBE, Immunosuppressants like Methotrexate or Azathioprine, DMARDs like Sulfasalazine, and Phototherapy. Materials and methods: After taking consent, 40 patients treated with excimer light, 46 patients treated with triamcinolone injection intralesionally and 14 patients treated with topical minoxidil 5% were compared by their photographs taken prior to treatments, at 2 months and 6 months follow up. Results: Among the excimer group, 21/32 (61.76% with single patch and 1/6 (16.67% with multiple patches achieved >50% hair regrowth. Among Triamcinolone group, 23/30 (76.67% with single patch and 10/16 (62.5% with multiple patches achieved >50% hair regrowth. Among the Minoxidil group, 4/12 (33.33% with single patch and none .i.e 0/2 with multiple patches achieved >50% regrowth. Conclusion: After comparing the efficacy of Excimer light therapy, intralesional triamcinolone and 5% Minoxidil, it was concluded that intralesional triamcinolone seems to be the most efficacious. Multiple patches were more resistant than single patch. Scalp response much better than beard.

  4. The Results of Raster-Scan Laser Conditioning Studies on DKDP Triplers Using Nd: YAG and Excimer Lasers

    Energy Technology Data Exchange (ETDEWEB)

    Runkel, M; Neeb, K; Staggs, M; Auerbach, J; Burnham, A

    2001-11-01

    In this paper we present the results of damage tests performed at 1064 and 355-nm at 8-10 ns on conventional and rapid growth DKDP tripler crystals. The crystals were laser conditioned prior to damage testing by raster scanning using either Nd:YAG (1064 and 355 nm, 8-10ns) or excimer lasers at 248, 308 or 351 nm with pulse durations of approximately 30-47 ns. The results show that it is possible to attain increases in 355-nm damage probability fluences of 2X for excimer conditioning at 248 and 308 nm. However these wavelengths can induce absorption sufficient to induce bulk fracture by thermal shock when impurities such as arsenic, rubidium and sulfur are present in the crystals in sufficient quantity. Tests to evaluate the efficiency of 351-nm conditioning (XeF excimer) show improvements of 2X and that thermal fracture by induced absorption is not a problem. We also discuss our recent discovery that low fluence raster scanning at UV wavelengths leads to 1064-nm damage thresholds of over 100 J/cm{sup 2} (10-ns pulses).

  5. Self-compacting concrete mixtures for road BUILDING

    Directory of Open Access Journals (Sweden)

    Tran Tuan My

    2012-10-01

    Therefore, effective concrete road pavements require self-compacting though non-segregating concrete mixtures to comply with the pre-set values of their properties, namely, bending and compressive strength, corrosion resistance, freeze resistance, etc. Acting in cooperation with Department of Technology of Binders and Concretes of MSUCE, NIIMosstroy developed and examined a self-compacting cast concrete mixture designated for durable monolithic road pavements. The composition in question was generated by adding a multi-component modifier into the mix. The modifier was composed of a hyperplasticiser, active (structureless fine and crystalline silica, and a concrete hardening control agent.

  6. Compact orthogonal NMR field sensor

    Science.gov (United States)

    Gerald, II, Rex E.; Rathke, Jerome W [Homer Glen, IL

    2009-02-03

    A Compact Orthogonal Field Sensor for emitting two orthogonal electro-magnetic fields in a common space. More particularly, a replacement inductor for existing NMR (Nuclear Magnetic Resonance) sensors to allow for NMR imaging. The Compact Orthogonal Field Sensor has a conductive coil and a central conductor electrically connected in series. The central conductor is at least partially surrounded by the coil. The coil and central conductor are electrically or electro-magnetically connected to a device having a means for producing or inducing a current through the coil and central conductor. The Compact Orthogonal Field Sensor can be used in NMR imaging applications to determine the position and the associated NMR spectrum of a sample within the electro-magnetic field of the central conductor.

  7. Compact, Low Cost APD Arrays with Built-in Optical Amplification Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The overall goal of this proposed Phase II SBIR program by Epitaxial Technologies is to develop a compact, low-cost, low power, low noise and ultra-sensitive...

  8. A Compact Remote Sensing Lidar for High Resolution Measurements of Methane Project

    Data.gov (United States)

    National Aeronautics and Space Administration — ? Develop the technology for a compact, space-qualifiable laser transmitter for a lidar operating at 1.65 5 to enable Earth observation CH4 measurements. ? Reduce...

  9. Compact, Low Cost APD Arrays with Built-in Optical Amplification Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The overall goal of the proposed program by Epitaxial Technologies is to develop a compact, low-cost, low power, low noise and ultra-sensitive Avalanche Photo Diode...

  10. Advanced precision expendable pattern casting technology. 1994 Summary report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-05-01

    Casting technology is described. The following areas are reported on: precision pattern production; pattern coating; sand fill and compaction; pattern gating; mechanical properties; and technology transfer efforts.

  11. Professional Windows Embedded Compact 7

    CERN Document Server

    Phung, Samuel; Joubert, Thierry; Hall, Mike

    2011-01-01

    Learn to program an array of customized devices and solutions As a compact, highly efficient, scalable operating system, Windows Embedded Compact 7 (WEC7) is one of the best options for developing a new generation of network-enabled, media-rich, and service-oriented devices. This in-depth resource takes you through the benefits and capabilities of WEC7 so that you can start using this performance development platform today. Divided into several major sections, the book begins with an introduction and then moves on to coverage of OS design, application development, advanced application developm

  12. Compact monolithic capacitive discharge unit

    Science.gov (United States)

    Roesler, Alexander W.; Vernon, George E.; Hoke, Darren A.; De Marquis, Virginia K.; Harris, Steven M.

    2007-06-26

    A compact monolithic capacitive discharge unit (CDU) is disclosed in which a thyristor switch and a flyback charging circuit are both sandwiched about a ceramic energy storage capacitor. The result is a compact rugged assembly which provides a low-inductance current discharge path. The flyback charging circuit preferably includes a low-temperature co-fired ceramic transformer. The CDU can further include one or more ceramic substrates for enclosing the thyristor switch and for holding various passive components used in the flyback charging circuit. A load such as a detonator can also be attached directly to the CDU.

  13. Charge carrier mobility and electronic properties of Al(Op3: impact of excimer formation

    Directory of Open Access Journals (Sweden)

    Andrea Magri

    2015-05-01

    Full Text Available We have studied the electronic properties and the charge carrier mobility of the organic semiconductor tris(1-oxo-1H-phenalen-9-olatealuminium(III (Al(Op3 both experimentally and theoretically. We experimentally estimated the HOMO and LUMO energy levels to be −5.93 and −3.26 eV, respectively, which were close to the corresponding calculated values. Al(Op3 was successfully evaporated onto quartz substrates and was clearly identified in the absorption spectra of both the solution and the thin film. A structured steady state fluorescence emission was detected in solution, whereas a broad, red-shifted emission was observed in the thin film. This indicates the formation of excimers in the solid state, which is crucial for the transport properties. The incorporation of Al(Op3 into organic thin film transistors (TFTs was performed in order to measure the charge carrier mobility. The experimental setup detected no electron mobility, while a hole mobility between 0.6 × 10−6 and 2.1 × 10−6 cm2·V−1·s−1 was measured. Theoretical simulations, on the other hand, predicted an electron mobility of 9.5 × 10−6 cm2·V−1·s−1 and a hole mobility of 1.4 × 10−4 cm2·V−1·s−1. The theoretical simulation for the hole mobility predicted an approximately one order of magnitude higher hole mobility than was observed in the experiment, which is considered to be in good agreement. The result for the electron mobility was, on the other hand, unexpected, as both the calculated electron mobility and chemical common sense (based on the capability of extended aromatic structures to efficiently accept and delocalize additional electrons suggest more robust electron charge transport properties. This discrepancy is explained by the excimer formation, whose inclusion in the multiscale simulation workflow is expected to bring the theoretical simulation and experiment into agreement.

  14. Excimer laser trabeculotomy: a new, minimally invasive procedure for patients with glaucoma.

    Science.gov (United States)

    Wilmsmeyer, Sonja; Philippin, Heiko; Funk, Jens

    2006-06-01

    Excimer laser trabeculotomy (ELT) ab interno is a new surgical technique to reduce intraocular pressure (IOP) in patients with glaucoma or ocular hypertension. Our purpose was to examine IOP reduction and the use of antiglaucoma drugs (AGD) in patients treated with ELT and to evaluate the safety of this laser treatment. To increase the outflow of aqueous humor, ten microperforations of the trabecular meshwork were performed by an endoscope-guided photoablative laser probe (Excimer laser, AIDA, TUI-Laser, Munich; pulse energy: 1.2 mJ at fiber tip, pulse duration: 60 ns, repetition rate: 20 Hz). Average operation time usually was about 2 min. In our pilot study, one group of patients without cataract underwent ELT, the other group with cataract underwent phacoemulsification (PHACO) plus ELT. IOP, visual acuity, and AGD were determined preoperatively (T0) and 2-4 months (T1), 5-7 months (T2), 11-13 months (T3), and 22-26 (T4) months after surgery. Treatment was defined to be successful if (1) postoperative IOP was surgery due to insufficient IOP reduction. According to Kaplan-Meier statistics, the success rate was 60% (T1), 49% (T2), and 46% (T3), respectively. The number of AGD was 1.9+/-0.1 (T0), 1.2+/-0.2 (T1), 1.3+/-0.2 (T2), 1.8+/-0.2 (T3), and 1.5+/-0.3 (T4). Combined phacoemulsification plus ELT reduced the IOP from 22.4 mmHg+/-0.6 (T0, n=57) to 16.5+/-0.4 (T1, n=52), 16.1+/-0.5 (T2, n= 40), 16.4+/-0.4 (T3, n= 35), and 12.8+/-1.5 (T4, n=4) mmHg, respectively; 7% of the eyes treated with the combined procedure needed repeat surgery due to insufficient IOP reduction. According to Kaplan-Meier statistics, the success rate was 85% (T1), 74% (T2), and 66% (T3), respectively. The number of AGD was 1.1+/-0.2 (T0), 0.9+/-0.2 (T1), 1.1+/-0.2 (T2), 1.2+/-0.2 (T3), and 1.8+/-0.9 (T4). ELT, especially in combination with phacoemulsification, is a new, promising, minimally invasive laser treatment to reduce IOP for at least 1-2 years. ELT alone is less effective in IOP

  15. Does imiquimod pretreatment optimize 308-nm excimer laser (UVB) therapy in psoriasis patients?

    Science.gov (United States)

    Tacastacas, Joselin D; Oyetakin-White, Patricia; Soler, David C; Young, Andrew; Groft, Sarah; Honda, Kord; Cooper, Kevin D; McCormick, Thomas S

    2017-07-01

    Psoriasis continues to be a debilitating skin disease affecting 1-3% of the United States population. Although the effectiveness of several current biologic therapies have described this pathology as a IL-23, TNF-a and Th17-mediated disease, less invasive approaches are still in use and in need of refinement. One of these is the usage of narrow band-UVB (NB-UVB) therapy to deplete specifically intra-epidermal CD3+, CD4+ and CD8+ cells to clear psoriatic plaques. In order to improve NB-UVB therapy, we sought to determine whether skin pre-treatment with the TLR7 agonist imiquimod (IMQ) would help increase the efficiency of the former at resolving psoriatic plaques. Eucerin(®) Original Moisturizing Lotion (topical vehicle) or Aldara(®) (imiquimod 5% topical cream) were applied for 5 days once daily to a maximum contiguous area of 25 cm(2) (5 cm × 5 cm area). Patients were provided with sachets containing 12.5 mg of imiquimod each and were instructed to apply imiquimod (I) to two psoriasis plaques (5 sachets of imiquimod allotted to each plaque). A PHAROS excimer Laser EX-308 (Ra Medical Systems, Inc. Carlsbad, CA, USA) with an output of monochromatic 308-nm light and pulse width of 20-50 ns was used for all patients. Punch biopsies of psoriatic lesions (6 mm) were taken at 4 and 48 h after final application of topical treatment with or without excimer laser treatment. Real-time quantitative RT-PCR was performed according to manufacturer's instructions and Inmunohistochemistry was used as described before. Our results suggests that although IMQ seemed to activate the type I interferon pathway as previously described, its concomitant usage with NB-UVB for clearing psoriatic skin was ineffective. Although upregulation of genes MxA, GRAMD1A and DMXL2 suggested that IMQ treatment did induce skin changes in psoriasis patients, more optimal dosing of IMQ and NB-UVB might be necessary to achieve desired treatment responses. The observation that psoriasis involvement was

  16. Outcomes of excimer laser enhancements in pseudophakic patients with multifocal intraocular lens

    Directory of Open Access Journals (Sweden)

    Schallhorn SC

    2016-04-01

    Full Text Available Steven C Schallhorn,1–3 Jan A Venter,2 David Teenan,2 Julie M Schallhorn,3 Keith A Hettinger,2 Stephen J Hannan,2 Martina Pelouskova2 1Department of Ophthalmology, University of California, San Francisco, CA, USA; 2Optical Express, Glasgow, UK; 3Department of Ophthalmology, University of Southern California, Los Angeles, CA, USA Purpose: The aim of this study was to assess visual and refractive outcomes of laser vision correction (LVC to correct residual refraction after multifocal intraocular lens (IOL implantation. Patients and methods: In this retrospective study, 782 eyes that underwent LVC to correct unintended ametropia after multifocal IOL implantation were evaluated. Of all multifocal lenses implanted during primary procedure, 98.7% were refractive and 1.3% had a diffractive design. All eyes were treated with VISX STAR S4 IR excimer laser using a convectional ablation profile. Refractive outcomes, visual acuities, patient satisfaction, and quality of life were evaluated at the last available visit. Results: The mean time between enhancement and last visit was 6.3±4.4 months. Manifest spherical equivalent changed from -0.02±0.83 D (-3.38 D to +2.25 D pre-enhancement to 0.00±0.34 D (-1.38 D to +1.25 D post-enhancement. At the last follow-up, the percentage of eyes within 0.50 D and 1.00 D of emmetropia was 90.4% and 99.5%, respectively. Of all eyes, 74.9% achieved monocular uncorrected distance visual acuity 20/20 or better. The mean corrected distance visual acuity remained the same before (-0.04±0.06 logMAR [logarithm of the minimum angle of resolution] and after LVC procedure (-0.04±0.07 logMAR; P=0.70. There was a slight improvement in visual phenomena (starburst, halo, glare, ghosting/double vision following the enhancement. No sight-threatening complications related to LVC occurred in this study. Conclusion: LVC in pseudophakic patients with multifocal IOL was safe, effective, and predictable in a large cohort of

  17. A transition-edge-sensor-based instrument for the measurement of individual He2* excimers in a superfluid 4He bath at 100 mK

    Science.gov (United States)

    Carter, Faustin Wirkus

    This dissertation is an account of the first calorimetric detection of individual He*2 excimers within a bath of superfluid 4He. When superfluid helium is subject to ionizing radiation, diatomic He molecules are created in both the singlet and triplet states. The singlet He molecules decay within nanoseconds, but due to a forbidden spin-flip the triplet molecules have a relatively long lifetime of 13 seconds in superfluid He. When He* 2 molecules decay, they emit a ~15 eV photon. Nearly all matter is opaque to these vacuum-UV photons, although they do propagate through liquid helium. The triplet state excimers propagate ballistically through the superfluid until they quench upon a surface; this process deposits a large amount of energy into the surface. The prospect of detecting both excimer states is the motivation for building a detector immersed directly in the superfluid bath. The detector used in this work is a single superconducting titanium transition edge sensor (TES). The TES is mounted inside a hermetically sealed chamber at the baseplate of a dilution refrigerator. The chamber contains superfluid helium at 100 mK. Excimers are created during the relaxation of high-energy electrons, which are introduced into the superfluid bath either in situ via a sharp tungsten tip held above the field-emission voltage, or by using an external gamma-ray source to ionize He atoms. These excimers either propagate through the LHe bath and quench on a surface, or decay and emit vacuum-ultraviolet photons that can be collected by the detector. This dissertation discusses the design, construction, and calibration of the TES-based excimer detecting instrument. It also presents the first spectra resulting from the direct detection of individual singlet and triplet helium excimers.

  18. Compaction dynamics of crunchy granular material

    Directory of Open Access Journals (Sweden)

    Guillard François

    2017-01-01

    Full Text Available Compaction of brittle porous material leads to a wide variety of densification patterns. Static compaction bands occurs naturally in rocks or bones, and have important consequences in industry for the manufacturing of powder tablets or metallic foams for example. Recently, oscillatory compaction bands have been observed in brittle porous media like snow or cereals. We will discuss the great variety of densification patterns arising during the compaction of puffed rice, including erratic compaction at low velocity, one or several travelling compaction bands at medium velocity and homogeneous compaction at larger velocity. The conditions of existence of each pattern are studied thanks to a numerical spring lattice model undergoing breakage and is mapped to the phase diagram of the patterns based on dimensionless characteristic quantities. This also allows to rationalise the evolution of the compaction behaviour during a single test. Finally, the localisation of compaction bands is linked to the strain rate sensitivity of the material.

  19. Compact Stirling cooling of astronomical detectors

    CERN Document Server

    Raskin, Gert; Pessemier, Wim; Padilla, Jesus Perez; Vandersteen, Jeroen

    2013-01-01

    MAIA, a three-channel imager targeting fast cadence photometry, was recently installed on the Mercator telescope (La Palma, Spain). This instrument observes a 9.4 x 14.1 arcmin field of view simultaneously in three color bands ($u$, $g$ and $r$), using three of the largest (un-) available frame-transfer CCDs, namely the 2k x 6k CCD42-C0 from e2v. As these detectors are housed in three separate cryostats, compact cooling devices are required that offer sufficient power to cool the large chips to a temperature of 165K. We explored a broad spectrum of cooling options and technologies to cool the MAIA detectors. Finally, compact free-piston Stirling coolers were selected, namely the CryoTel MT cryo-coolers from SUNPOWER, that can extract 5W of heat at a temperature of 77K. In this contribution we give details of the MAIA detector cooling solution. We also discuss the general usability of this type of closed-cycle cryo-coolers for astronomical detectors. They offer distinct advantages but the vibrations caused by ...

  20. The Compact Project: Final Report.

    Science.gov (United States)

    National Alliance of Business, Inc., Washington, DC.

    The National Alliance of Business (NAB) surveyed the 12 sites that participated in the Compact Project to develop and implement programs of business-education collaboration. NAB studied start-up activities, key players, conditions for collaboration, accomplishments, challenges, and future plans. Program outcomes indicated that building successful…

  1. JACKSON'S THEOREM FOR COMPACT GROUPS

    Institute of Scientific and Technical Information of China (English)

    H. Vaezi; S. F. Rzaev

    2002-01-01

    In this article we consider the generalized shift operator defined by(Sh.f)(g) = ∫Gf (tut-1g)dton compact group G and by help of this operator we define "Spherical" modulus of continuity. So we proveStechkin and Jackson type theorems.

  2. Compact Photon Source Conceptual Design

    Energy Technology Data Exchange (ETDEWEB)

    Degtyarenko, Pavel V. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Wojtsekhowski, Bogdan B. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States)

    2016-04-01

    We describe options for the production of an intense photon beam at the CEBAF Hall D Tagger facility, needed for creating a high-quality secondary K 0 L delivered to the Hall D detector. The conceptual design for the Compact Photon Source apparatus is presented.

  3. DNA compaction by nonbinding macromolecules

    NARCIS (Netherlands)

    Vries, de R.J.

    2012-01-01

    Compaction of DNA by nonbinding macromolecules such as uncharged flexible polymer chains and negatively charged globular proteins is thought to have various applications in biophysics, for example in the formation of a nucleoid structure in bacteria. A simple experimental model that has been very

  4. Dynamics of a compact operator

    CERN Document Server

    Lim, Teck-Cheong

    2010-01-01

    Let $T:X\\to X$ be a compact linear (or more generally affine) operator from a Banach space into itself. For each $x\\in X$, the sequence of iterates $T^nx, n=0,1,...$ and its averages $\\frac{1}{k}\\sum_{k=0}^nT^{k-1}x, n=0,1,...$ are either bounded or approach infinity.

  5. DNA compaction by nonbinding macromolecules

    NARCIS (Netherlands)

    Vries, de R.J.

    2012-01-01

    Compaction of DNA by nonbinding macromolecules such as uncharged flexible polymer chains and negatively charged globular proteins is thought to have various applications in biophysics, for example in the formation of a nucleoid structure in bacteria. A simple experimental model that has been very we

  6. Fuzzy Soft Compact Topological Spaces

    Directory of Open Access Journals (Sweden)

    Seema Mishra

    2016-01-01

    Full Text Available In this paper, we have studied compactness in fuzzy soft topological spaces which is a generalization of the corresponding concept by R. Lowen in the case of fuzzy topological spaces. Several basic desirable results have been established. In particular, we have proved the counterparts of Alexander’s subbase lemma and Tychonoff theorem for fuzzy soft topological spaces.

  7. On sequential countably compact topological semigroups

    CERN Document Server

    Gutik, Oleg V; Repovš, Dušan

    2008-01-01

    We study topological and algebraic properties of sequential countably compact topological semigroups similar to compact topological semigroups. We prove that a sequential countably compact topological semigroup does not contain the bicyclic semigroup. Also we show that the closure of a subgroup in a sequential countably compact topological semigroup is a topological group, that the inversion in a Clifford sequential countably compact topological semigroup is continuous and we prove the analogue of the Rees-Suschkewitsch Theorem for simple regular sequential countably compact topological semigroups.

  8. Mono-Energy Coronary Angiography with a Compact Synchrotron Source

    Science.gov (United States)

    Eggl, Elena; Mechlem, Korbinian; Braig, Eva; Kulpe, Stephanie; Dierolf, Martin; Günther, Benedikt; Achterhold, Klaus; Herzen, Julia; Gleich, Bernhard; Rummeny, Ernst; Noёl, Peter B.; Pfeiffer, Franz; Muenzel, Daniela

    2017-02-01

    X-ray coronary angiography is an invaluable tool for the diagnosis of coronary artery disease. However, the use of iodine-based contrast media can be contraindicated for patients who present with chronic renal insufficiency or with severe iodine allergy. These patients could benefit from a reduced contrast agent concentration, possibly achieved through application of a mono-energetic x-ray beam. While large-scale synchrotrons are impractical for daily clinical use, the technology of compact synchrotron sources strongly advanced during the last decade. Here we present a quantitative analysis of the benefits a compact synchrotron source can offer in coronary angiography. Simulated projection data from quasi-mono-energetic and conventional x-ray tube spectra is used for a CNR comparison. Results show that compact synchrotron spectra would allow for a significant reduction of contrast media. Experimentally, we demonstrate the feasibility of coronary angiography at the Munich Compact Light Source, the first commercial installation of a compact synchrotron source.

  9. Durability Properties of Palm Oil Fuel Ash Self Compacting Concrete

    Directory of Open Access Journals (Sweden)

    T. Ofuyatan

    2015-02-01

    Full Text Available Self Compacting Concrete (SCC is a new innovation in technology that can flow readily into place under its own self weight and fill corner areas of reinforcement structures without the need to vibrate and without segregation of its constitute. The problem of durability of concrete structures due to inadequate compaction by skilled workers has become a source of concern globally. The shortage of skilled manpower, noise and vibration of equipment on construction sites has led to the development of self compacting concrete. This paper presents an experimental study on the durability properties of Self Compacting Concrete with partial placement of Palm Oil Fuel Ash (POFA. Twelve POFA self-compacting concretes of various strength grades were designed at varying percentages of 0, 5, 10, 15, 20, 25 and 30%. The concrete with no placement of ash served as control. Conplast SP432MS was used as superplasticiser in the mix. The experiments are carried out by adopting a water-powder ratio of 0.36. Workability of the fresh concrete is determined by using tests such as: slump flow, T50, V-funnel and L-Box tests. The durability of concrete is tested by acid resistance, sulphate attack and saturated water absorption at the age of 14, 28, 56 and 90 days.

  10. PLIF thermometry in shock tunnel flows using a Raman-shifted tunable excimer laser

    Science.gov (United States)

    Palma, P. C.; McIntyre, T. J.; Houwing, A. F. P.

    Planar laser-induced fluorescence is performed in a free-piston shock tunnel by using a Raman-shifted tunable excimer laser to excite nitric oxide molecules in the flow. Two different flowfields are examined to test the difficulties associated with applying the technique to shock tunnels: the bluff body flow produced by a 25 mm diameter cylinder; and the oblique shock and expansion fan produced by a 35° half-angle wedge. For the cylinder, the maximum flow enthalpy was limited to 4.1 MJ kg -1 due to high flow luminosity which is produced by metallic contaminants in the flow. A reflective filter is used to reduce the influence of flow luminosity making these measurements feasible. Freestream temperature measurements are in excellent agreement with those predicted from numerical flow calculations. Large uncertainties were observed for the high-temperature post-shock results. Several higher enthalpy shots (14 MJ kg -1) were also performed with the wedge and showed an insignificant amount of contaminant emission.

  11. Effect of Homoharringtonine on Corneal Haze after Excimer Laser Photorefractive Keratectomy in Rabbits

    Institute of Scientific and Technical Information of China (English)

    ZHANG Mingchang; WANG Li; WANG Yong; DING Zhengping; MAI Caikeng; NIE Shaosong; CHEN Fei

    2005-01-01

    To evaluate the inhibiting effect of Homoharringtonine HHT) on the corneal haze after excimer laser photorefractive keratectomy (PRK) in rabbits. 18 healthy rabbits which underwent PRK were randomly divided into three groups (A, B and C). The refractive degree of ablation was -10. 0DS in each group. Group A was locally treated with a piece of filter paper soaked with 1 mg/mi HHT for 5 min, and then the entire cornea was repeatedly irrigated with balance solution;Group B was dropped with 0.1 mg/mL HHT after PRK for 3 months; Group C was the control group. Corneal haze, histopathology, response, ect. were investigated. The corneal haze was sig nificantly less in group A, while the difference between group B and group C was insignificant.Keratocytes and fibrocytes in corneal stroma were more active up to 3 months in group B and group C. Intraoperative use of topical HHT can reduce corneal haze after PRK in rabbits.

  12. Efficiency of pulse-mode dielectric barrier discharge excimer lamp in constant duty cycle

    Science.gov (United States)

    Akashi, Haruaki; Oda, Akinori; Sakai, Yosuke

    2008-10-01

    Efficiency of pulse-mode dielectric barrier discharge (DBD) excimer lamp under constant duty cycle with increasing applied voltage has been simulated using two dimensional fluid model[1]. Xe gas with 300Torr pressure is assumed. And the simulated region considered in this model is 1cm(gap length)x3cm(radial length). Periodical boundary conditions are assumed for the radial direction boundaries. The both electrodes are covered with dielectrics and their thickness is 0.2cm. 5˜8kV trapezoid shape voltage is applied with the same voltage rising ratio and 50% duty ratio waveform with 200x10^3pps repetition rate. The discharge occurs at the rising edge and tailing edge of applied voltage. 172nm VUV intensity obtained from first discharge is higher than second one in lower applied voltage (<6kV) case. And in higher voltage case, the intensity from second discharge becomes higher. This is explained by shortening of interval time between the discharges. The short interval time makes higher initial electron density for second discharge. As a results, the input and 172nm VUV output power increases with increasing applied voltage, but the efficiency decreases. Because of inefficient surface discharge [1]H. Akashi et al, IEEE Trans. Plasma Science, Vol.33,No.2(2005,4)pp.308-309

  13. Development and application of UV excimer lamps from 354nm -126nm

    Science.gov (United States)

    Boyd, Ian W.; Liaw, Irving I.

    2006-05-01

    The use of high intensity ultraviolet (UV) and vacuum ultraviolet (VUV) radiation generated from decaying excimer complexes through dielectric barrier discharge (silent discharges) sources for the purposes of surface processing and modification is reviewed. Such sources provide a singular dominant narrow-band emission at various wavelengths(λ) between 126 - 354 nm. The remarkable simplicity of supplying these sources and flexibility of their geometric configurations allow them to be coupled in parallel thus providing high photon fluxes over large areas. The monochromatic selectivity allows for application to process and chemical pathway specific tasks by simple variation of the discharge gas mixture. These sources are an interesting addition to and as an alternative to lasers for large scale industrial applications and their unique characterisitics have led to their use in a number of low-temperature material modification techniques, some of which are reviewed here. These include the photo-induced low-temperature formation of oxynitride layers, high-κ thin film layers and the post-deposition annealing of pulsed laser deposited (PLD) thin films.

  14. Temporal Characteristics of Emission of Working Mixtures of a HgBr/HgCl Excimer Lamp

    Science.gov (United States)

    Malinin, A. N.; Guĭvan, N. N.; Shimon, L. L.; Polyak, A. V.; Zubrilin, N. G.; Shchedrin, A. I.

    2001-12-01

    Results of a study of temporal characteristics of the emission of gas-discharge plasma of atmospheric pressure in multicomponent mixtures (mercury dibromide and dichloride with helium and additions of molecular nitrogen and xenon) of working media of HgBr/HgCl excimer lamps are presented. Gas-discharge plasma was produced and components of the working mixture were excited by high-frequency barrier and surface discharges occurring simultaneously. The repetition rate of the pumping pulse and its duration are 1000 Hz and ˜100 ns, respectively. It is found that the amplitude and the length of emission pulses and their trailing edge are modified in HgBr2: HgCl2: Xe: He and HgBr2: HgCl2: N2: He mixtures when xenon and molecular nitrogen are added, as compared to a HgBr2: HgCl2: He mixture. Regularities observed in temporal characteristics of gas-discharge plasma emission are discussed.

  15. Electrical and kinetical aspects of homogeneous dielectric-barrier discharge in xenon for excimer lamps

    Science.gov (United States)

    Belasri, A.; Harrache, Z.

    2010-12-01

    A pulsed dielectric-barrier discharge in xenon has been simulated for operating conditions typical to excimer lamps, in which the discharge is considered spatially homogeneous. The computer model developed is based on the xenon plasma chemistry, the circuit, and the Boltzmann equations. First, the validity of the physical model was checked and compared to experimental and theoretical works, and then the model is applied in the case of a sinusoidal voltage at period frequencies in the range of 50 kHz-2 MHz. The results obtained with the present description are in good agreement with experimental measurements and one-dimensional fluid prediction in terms of electrical characteristics and vacuum ultraviolet (vuv) emission. The effect of operation voltage, power source frequency, dielectric capacitance, as well as gas pressure on the discharge efficiency and the 172, 150, and 147 nm photon generation, under the typical experimental operating conditions and for the case of a sinusoidal applied voltage, have been investigated and discussed. Calculations suggest that the overall conversion efficiency from electrical energy to vuv emission in the lamp is greater than 38%, and it will be very affected at high power source frequency and high gas pressure with a significant dependence on the dielectric capacitance.

  16. Enhanced efficiency from a Xe excimer barrier discharge lamp employing short-pulsed excitation

    Science.gov (United States)

    Mildren, Richard P.; Morrow, R.; Carman, Robert J.

    2000-04-01

    We have measured the efficiency and spatial characteristics of output radiation as a function of fill pressure for a Xe excimer lamp employing a short voltage pulse (approximately 100 ns) excitation circuit, and compared the results with those obtained using conventional AC (ie. sinusoidal voltage waveform). When using pulsed excitation, VUV output is obtained from a homogeneous discharge at efficiencies which increase linearly with Xe pressure in the range 50 - 750 torr up to 3.2X the maximum efficiency obtained when using AC. When using AC excitation, the efficiency saturates with increasing pressure > 350 torr for which pressures the discharge appearance is altered from a diffuse discharge to one which is comprised of stochastic or stationary filaments. We have also recorded discharge spectra which highlight the different character of the homogeneous and filamented types of discharges. It is deduced that the enhanced efficiency arises due to the capability of pulsed excitation to produce a homogeneous (glow-like) discharge at higher pressure, which brings about more optimal electron density and temperature conditions for exclusively exciting Xe metastables than possible using AC. We attribute the homogenizing effect of short-pulsed excitation to the rapid rate at which the applied E-field increases to the necessary value for homogeneous discharge breakdown to proceed at a faster rate than the formation of filaments.

  17. Modeling of excimer laser radiation induced defect generation in fluoride phosphate glasses

    Science.gov (United States)

    Natura, U.; Ehrt, D.

    2001-03-01

    Fluoride phosphate (FP) glasses with low phosphate content are high-transparent in the deep ultraviolet (UV) range and attractive candidates for UV-optics. Their optical properties are complementary to fluoride crystals. The anomalous partial dispersion makes them desirable for optical lens designs to reduce the secondary spectrum. Their UV transmission is limited by trace impurities introduced by raw materials and decreases when exposed to UV-radiation (lamps, lasers). The experiments of the paper published previously in this journal were used in order to separate radiation induced absorption bands in the fluoride phosphate glass FP10. In this paper the generation mechanism of the phosphorus-oxygen related hole center POHC 2 is investigated in detail in glasses of various compositions (various phosphate and impurity contents) in order to predict the transmission loss in case of long-time irradiation. Experiments were carried out using ArF- and KrF-excimer lasers (ns-pulses). POHC 2 generation strongly depends on the phosphate content and on the content of Pb 2+. A model was developed on these terms. Rate equations are formulated, incorporating the influence of the Pb 2+-content on the defect generation, a two-step creation term including an energy transfer process and a one-photon bleaching term. This results in a set of coupled nonlinear differential equations. Absorption coefficients and lifetimes of the excited states were calculated as well. Experimental results compared well with the numerical analysis of the theoretical rate equations.

  18. Modeling of dielectric barrier discharge excimer lamp excited by mono polar voltage pulses

    Science.gov (United States)

    Akashi, Haruaki; Oda, Akinori; Sakai, Yosuke

    2007-10-01

    Filametal discharges in Dielectric Barrier Discharge (DBD) excimer lamp excited by mono polar voltage pulses has been simulated using two dimensional fluid model. And the differences of the filament discharges formations between mono polar case and bipolar case [1] have been examined. Xe gas was used and its pressure is 300Torr. Simulated region is 1cm (gap length) x 3cm (radial length). Periodical boundary conditions are assumed for the radial direction boundaries. The both electrodes are covered with dielectrics and their thickness is 0.2cm. Applied voltage is 5kV trapezoid shape with 50% duty ratio waveform and its repetition rate is 200kpps. First a small amount of electron-ion pair is provided in the middle of the gap for initial condition. Then the voltage starts to apply. In the case of bipolar excitation, the discharge starts from one filament (streamer discharge), and finally, 5 filaments are obtained self-consistently. In the case of mono polar case, as first, similar to bipolar case, the discharge starts from one filament, however, only 3 filaments have been obtained. This result is similar to that of 100kHz bipolar voltage case. [1] H. Akashi et al, IEEE Trans. Plasma Science, Vol.33, No.2 (2005) pp.308-309

  19. N-type doping of Ge by As implantation and excimer laser annealing

    Energy Technology Data Exchange (ETDEWEB)

    Milazzo, R.; Napolitani, E., E-mail: enrico.napolitani@unipd.it; De Salvador, D.; Mastromatteo, M.; Carnera, A. [CNR-IMM MATIS and Dipartimento di Fisica Astronomia, Università di Padova, Via Marzolo 8, 35131 Padova (Italy); Impellizzeri, G.; Boninelli, S.; Priolo, F.; Privitera, V. [CNR-IMM MATIS and Dipartimento di Fisica e Astronomia, Università di Catania, Via S. Sofia 64, 95123 Catania (Italy); Fisicaro, G.; Italia, M.; La Magna, A. [CNR-IMM, Z.I. VIII Strada 5, 95121 Catania (Italy); Cuscunà, M.; Fortunato, G. [CNR-IMM, Via del Fosso del Cavaliere 100, 00133 Roma (Italy)

    2014-02-07

    The diffusion and activation of arsenic implanted into germanium at 40 keV with maximum concentrations below and above the solid solubility (8 × 10{sup 19} cm{sup −3}) have been studied, both experimentally and theoretically, after excimer laser annealing (λ = 308 nm) in the melting regime with different laser energy densities and single or multiple pulses. Arsenic is observed to diffuse similarly for different fluences with no out-diffusion and no formation of pile-up at the maximum melt depth. The diffusion profiles have been satisfactorily simulated by assuming two diffusivity states of As in the molten Ge and a non-equilibrium segregation at the maximum melt depth. The electrical activation is partial and decreases with increasing the chemical concentration with a saturation of the active concentration at 1 × 10{sup 20} cm{sup −3}, which represents a new record for the As-doped Ge system.

  20. The Role of Crystalline Water in the Interaction of Excimer Laser Light with Brushite

    Science.gov (United States)

    Dawes, M. L.; Langford, S. C.; Dickinson, J. T.

    1998-03-01

    A number of minerals of environmental interest contain waters of hydration, sometimes called crystalline water. Hydrated crystals often show dramatic changes in optical properties as well as mechanical properties, both influencing the response of the material to radiation. From an analytic point of view, very little is known about the influence of hydration regarding laser desorption and ablation phenomena. We explore the interaction of excimer laser light (KrF 248 nm) with single crystal brushite (CaHPO_4.2H_2O), a model biomineral phosphate containing H_2O. We first show that defects dominate the interactions as revealed by high sensitivity detection of Ca^+ at low fluences and that this ion emission predicts ablation thresholds. The most probable ion energy, which occurs at 11 eV, is much higher than the incident photon energy of 5 eV. The ion intensities also display a highly nonlinear fluence dependence, typically 6-8th order, entirely consistent with ion emission models we have recently presented. We show that laser coupling can be enhanced several orders of magnitude by generation of defects, i.e., by mechanical treatment, heating, or exposure to electron beams and that the consequences of crystalline H_2O and HPO_4^2- decomposition play major and related roles in this defect production.

  1. Ruthenium Grubbs' catalyst nanostructures grown by UV-excimer-laser ablation for self-healing applications

    Science.gov (United States)

    Aïssa, B.; Nechache, R.; Haddad, E.; Jamroz, W.; Merle, P. G.; Rosei, F.

    2012-10-01

    A self healing composite material consisting of 5-Ethylidene-2-Norbornene (5E2N) monomer reacted with Ruthenium Grubbs' Catalyst (RGC) was prepared. First, the kinetics of the 5E2N ring opening metathesis polymerization (ROMP) reaction RGC was studied as a function of temperature. We show that the polymerization reaction is still effective in a large temperature range (-15 to 45 °C), occurring at short time scales (less than 1 min at 40 °C). Second, the amount of RGC required for ROMP reaction significantly decreased through its nanostructuration by means of a UV-excimer laser ablation process. RGC nanostructures of few nanometers in size where successfully obtained directly on silicon substrates. The X-ray photoelectron spectroscopy data strongly suggest that the RGC still keep its original stoichiometry after nanostructuration. More importantly, the associated ROMP reaction was successfully achieved at an extreme low RGC concentration equivalent to (11.16 ± 1.28) × 10-4 Vol.%, occurring at very short time reaction. This approach opens new prospects for using healing agent nanocomposite materials for self-repair functionality, thereby obtaining a higher catalytic efficiency per unit mass.

  2. Experimental Analysis of Microscale Laser Shock Processing on Metallic Material Using Excimer Laser

    Institute of Scientific and Technical Information of China (English)

    Zhigang Che; Liangcai Xiong; Tielin Shi; Huayang Cheng; Likun Yang

    2009-01-01

    Microscale laser shock processing (μLSP), also known as laser shock processing in microscale, is a technique that uses microscale focused laser beam to induce high pressure plasma and generates plastic deformation and compressive residual stress in target materials, thus improves fatigue or stress corrosion cracking resistance of MEMS (Micro Electromechanical Systems) devices made of such a material. Many works have been reported about the research and experiment for μLSP. But the diameters of 50-200 μm were used at the first time for this field, which was useful for treating micro-device components with larger area and curved surface. The excimer laser was used firstly on μLSP for shorter wavelength than that of used in previous researches. The determination method of laser spot size at micro-level spatial resolution was presented. Under these conditions, plastic deformation, the stress analysis and microhardness with different pulse number, pulse energy and pulse spacing were investigated. Especially the residual stress distribution with depth treated by μLSP, was first investigated. Experiment results showed that the material performance was improved remarkably after μLSP.

  3. Excimer laser texturing of natural composite polymer surfaces for studying cell-to-substrate specific response

    Energy Technology Data Exchange (ETDEWEB)

    Dinca, V., E-mail: dincavalentina@yahoo.com [NILPRP, National Institute for Lasers, Plasma and Radiation Physics, Magurele, Bucharest (Romania); Alloncle, P.; Delaporte, P. [Aix-Marseille University, CNRS, LP3 Laboratory, Campus de Luminy, 13288 Marseille (France); Ion, V. [NILPRP, National Institute for Lasers, Plasma and Radiation Physics, Magurele, Bucharest (Romania); Faculty of Physics, University of Bucharest, 077125 Magurele (Romania); Rusen, L.; Filipescu, M. [NILPRP, National Institute for Lasers, Plasma and Radiation Physics, Magurele, Bucharest (Romania); Mustaciosu, C. [Horia Hulubei National Institute of Physics and Nuclear Engineering – IFIN HH, Magurele, Bucharest (Romania); Luculescu, C.; Dinescu, M. [NILPRP, National Institute for Lasers, Plasma and Radiation Physics, Magurele, Bucharest (Romania)

    2015-10-15

    Highlights: • Roughness gradients are obtained in one step by applying single laser pulses and sample tilting. • BSA protein and cell dependence behavior onto gradient characteristics was studied. • The degradation of the samples by lysozyme was correlated to its ability to access the textured area. - Abstract: Surface modifications of biocompatible materials are among the main factors used for enhancing and promoting specific cellular activities (e.g. spreading, adhesion, migration, and differentiation) for various types of medical applications such as implants, microfluidic devices, or tissue engineering scaffolds. In this work an excimer laser at 193 nm was used to fabricate chitosan–collagen roughness gradients. The roughness gradients were obtained in one step by applying single laser pulses and sample tilting. Fourier transform infrared spectroscopy measurements, atomic force microscopy (AFM), scanning electron microscopy (SEM), and spectro-ellipsometry (SE) were used for sample characterization. The goal is to determine the optimal morpho-chemical characteristics of these structures for in vitro tailoring of protein adsorption and cell behavior. The response induced by the roughness gradient onto various cell lines (i.e. L 929 fibroblasts, HEP G2 hepatocytes, OLN 93 oligodendrocytes, M63 osteoblasts) and bovine serum albumin (BSA) protein absorption was investigated.

  4. Excimer laser ablation lithography applied to the fabrication of reflective diffractive optics

    Science.gov (United States)

    Flury, M.; Benatmane, A.; Gérard, P.; Montgomery, P. C.; Fontaine, J.; Engel, T.; Schunck, J. P.; Fogarassy, E.

    2003-03-01

    We propose a low cost technique for the production of diffractive optical elements (DOE). These elements are devoted to high power lasers beam shaping in the mid-infrared wavelengths. This process called laser ablation lithography (LAL), may seem similar to laser beam writing (LBW) in the way the whole DOE's design is reproduced pixel by pixel on the substrate placed on a computer controlled XY translation stage. A first difference is that the photoresist is not exposed with UV light but is directly ablated with short excimer laser pulses. Furthermore, with LAL technique the size of the smallest pixel ( 5 μm×5 μm) is more than 10 times greater than those produced by LBW. We discuss in details the experimental set-up for LAL and demonstrate that it gives a resolution up to 10 times greater than photolithography with flexible masks. This makes LAL a promising solution for the production of DOE for use with Nd:YAG lasers. New applications of DOEs are finally introduced with high power lasers sources, such as laser marking or multi-point brazing.

  5. Excimer laser doping technique for application in an integrated CdTe imaging device

    CERN Document Server

    Mochizuki, D; Aoki, T; Tomita, Y; Nihashi, T; Hatanaka, Y

    1999-01-01

    CdTe is an attractive semiconductor material for applications in solid-state high-energy X-ray and gamma-ray imaging systems because of its high absorption coefficient, large band gap, good mobility lifetime product of holes and stability at normal atmospheric conditions. We propose a new concept for fabricating an integrated CdTe with monolithic circuit configuration for two-dimensional imaging systems suitable for medical, research or industrial applications and operation at room temperature. A new doping technique has been recently developed that employs excimer laser radiation to diffuse impurity atoms into the semiconductor. Accordingly, heavily doped n- and p-type layers with resistivities less than 1 OMEGA cm can be formed on the high resistive CdTe crystals. We have further extended this technique for doping with spatial pattern. We will present the laser doping technique and various results thus obtained. Spatially patterned doping is demonstrated and we propose the use of these doping techniques for...

  6. Excimer laser phototherapeutic keratectomy in conjunction with mitomycin C in corneal macular and granular dystrophies

    Directory of Open Access Journals (Sweden)

    Erdem Yuksel

    2016-04-01

    Full Text Available ABSTRACT Purpose: To evaluate the visual outcomes, recurrence patterns, safety, and efficacy of excimer laser phototherapeutic keratectomy (PTK in conjunction with mitomycin C (MMC for corneal macular and granular diystrophies. Methods: The patients were divided into two groups. Group 1 included patients with macular corneal dystrophy (MCD that caused superficial corneal plaque opacities, and Group 2 included patients with granular corneal dystrophy (GCD. Patients in both groups were pre-, peri-, and postoperatively evaluated. The groups were compared in terms of uncorrected visual acuity (VA, best spectacle-corrected VA, presence of mild or significant recurrence, and time of recurrence. Results: Eighteen eyes (nine with MCD and nine with GCD of 18 patients (10 men and eight women were included. PTK was performed for each eye that was included in this study. The mean ablation amount was 117.8 ± 24.4 µm and 83.5 ± 45.7 µm in MCD and GCD, respectively, (p=0.18. The postoperative improvement of the mean VA was similar between the two groups before recurrences (p>0.43 and after recurrences (p>0.71. There were no statistically significant differences in the recurrence rate and the recurrence-free period for any recurrence type. Conclusion: PTK was an effective, safe, and minimally invasive procedure for patients with MCD and GCD. PTK in conjunction with MMC was similarly effective for both groups in terms of recurrence and visual outcomes.

  7. High power excimer laser image relay system analysis using Delano diagram

    Science.gov (United States)

    Zhang, Yongshen; Zhao, Jun; Zhao, Xueqing; Hu, Yun; Wang, Dahui; Xue, Quanxi; Liu, Jingru

    2013-05-01

    The characteristics of Delano diagram are especially helpful in instrumental systems type with considerably separated components. For high power excimer laser system, especially for image relay scheme, the Delano diagram method is highly advantageous for the system's thin lens layout design. A primitive experimental image relay and it's combination optical layout is investigated in our high power XeCl laser system, with intensity smoothed spatial incoherent source. Instead of the uniform intensity distribution on the target as expected, it is obvious shows in the final image on the target that a gauss like intensity profile and a large amount of astigmatism results. There are two possible reasons: the first one is that not keeping proper relay of pupil plane (or Fourier plane) in the final stage, simply care the collimated beam of virtual object in the final focusing stage. With the help of Delano diagram, it's clearly shown in the diagram that the Fourier plane and the image plane come very close, indicates that a complete image relay of the object plane and Fourier plane is needed. The second reason is due to the off-axis setup in the large aperture main amplifier, which introduce significant astigmatism aberrations in the final optical path. This question can be solved using proper tilt and de-center of reflective mirror pair setup, and two possible such combination pairs are proposed.

  8. Automated measurement of the EUREKA EU213 excimer laser pulse-forming line

    Science.gov (United States)

    Boardman, Allan D.; Hodgson, Elizabeth M.; Spence, A. J.; Wilkins, M.; Wu, Jian; Ashton, J. A.

    1990-08-01

    This paper describes part of the EUREKA Eurolaser project EU213, to build an excimer laser. The emphasis is on control and monitoring systems. The performance of a test-bed laser built at Salford will be described. In the design discussed, two voltage components are generated separately and combined at the laser head to form a pumping pulse. A "magnetic switch" is used to isolate the two parts of the transmission line'. A theoretical analysis of the sustainer section of the line has been carried out and compared with measurements made using a dummy load in place of the laser head. A control system is discussed that is being developed to monitor the shape of each laser pulse at a high repetition rate. The control system is designed to protect the laser from damage. The construction of various conventional probes, and the progress towards various fibre probes will be reported with emphasis on measuring fast current pulses on the various parts of the line.

  9. Dynamics of He2∗ triplet state excimer bubbles in superfluid 4He

    Science.gov (United States)

    Eloranta, J.

    2007-02-01

    Time-dependent density functional theory calculations for bulk superfluid 4He were carried out to model dynamics around He2∗ excimers after optical excitation from the 3a to 3d state. The liquid dynamics occurring after a sudden change in the helium-liquid interaction results in interfacial dynamics, which can be divided into three different modes: (1) non-linear processes yielding shock and solitonic progressions, (2) fast interfacial dynamics related to thinning of the liquid-gas interface that occurs within few picoseonds and (3) slow spherical breathing motion of the liquid-gas interface with recursion times up to 110 ps. The long-range repulsive tail ( R > 12 Å) in the He-He2∗ interaction is found to play an important role in determining the recursion time of the solvent cavity breathing mode. As energy differences of just few wavenumbers in this region are sufficient to produce large changes in the recursion time, none of the pair potentials derived from the first principles could reproduce the experimental data [V.A. Benderskii, J. Eloranta, R. Zadoyan, V.A. Apkarian, J. Chem. Phys. 117 (2002) 1201]. Therefore it is concluded that the pump-probe experiments measure energy differences that are not possible to calculate using the current electronic structure methods. The results obtained from the density functional theory calculations are consistent with the proposed experimental scheme.

  10. Flow visualization in superfluid helium-4 using a thin line of He2 excimer tracers

    Science.gov (United States)

    Marakov, Alex; Gao, Jian; Guo, Wei; van Sciver, Steven; Ihas, Gary; McKinsey, Daniel; Vinen, William

    2014-03-01

    Cryogenic flow visualization techniques have been proven in recent years to be a very powerful experimental method to study turbulence in superfluid helium-4 (He II). In order to extract quantitative information of the flow field, we developed a new technique based on the generation of a thin line of He2 excimer tracers via femtosecond-laser field ionization. These tracers move solely with the normal-fluid component in He II and can be imaged using a laser-induce fluorescence technique. Studying the drift and distortion of the tracer line in a turbulent flow shall allow us to measure the instantaneous flow velocity field and hence determine the structure functions and the energy spectrum of the turbulence. We discuss the preliminary results obtained that for the first time visually reveal the existence of a laminar-to-turbulent transition in the normal fluid in thermal counterflow. W.G. acknowledges the startup support from Florida State University and the National High Magnetic Field Laboratory.

  11. Excimer Laser Phototherapeutic Keratectomy for the Treatment of Clinically Presumed Fungal Keratitis

    Directory of Open Access Journals (Sweden)

    Liang-Mao Li

    2014-01-01

    Full Text Available This retrospective study was to evaluate treatment outcomes of excimer laser phototherapeutic keratectomy (PTK for clinically presumed fungal keratitis. Forty-seven eyes of 47 consecutive patients underwent manual superficial debridement and PTK. All corneal lesions were located in the anterior stroma and were resistant to medication therapy for at least one week. Data were collected by a retrospective chart review with at least six months of follow-up data available. After PTK, infected corneal lesions were completely removed and the clinical symptoms resolved in 41 cases (87.2%. The mean ablation depth was 114.39±45.51 μm and diameter of ablation was 4.06±1.07 mm. The mean time for healing of the epithelial defect was 8.8±5.6 days. Thirty-four eyes (82.9% showed an improvement in best spectacle-corrected visual acuity of two or more lines. PTK complications included mild to moderate corneal haze, hyperopic shift, irregular astigmatism, and thinning cornea. Six eyes (12.8% still showed progressed infection, and conjunctival flap covering, amniotic membrane transplantation, or penetrating keratoplasty were given. PTK is a valuable therapeutic alternative for superficial infectious keratitis. It can effectively eradicate lesions, hasten reepithelialization, and restore and preserve useful visual function. However, the selection of surgery candidates should be conducted carefully.

  12. Compaction and relaxation of biofilms

    KAUST Repository

    Valladares Linares, R.

    2015-06-18

    Operation of membrane systems for water treatment can be seriously hampered by biofouling. A better characterization of biofilms in membrane systems and their impact on membrane performance may help to develop effective biofouling control strategies. The objective of this study was to determine the occurrence, extent and timescale of biofilm compaction and relaxation (decompaction), caused by permeate flux variations. The impact of permeate flux changes on biofilm thickness, structure and stiffness was investigated in situ and non-destructively with optical coherence tomography using membrane fouling monitors operated at a constant crossflow velocity of 0.1 m s−1 with permeate production. The permeate flux was varied sequentially from 20 to 60 and back to 20 L m−2 h−1. The study showed that the average biofilm thickness on the membrane decreased after elevating the permeate flux from 20 to 60 L m−2 h−1 while the biofilm thickness increased again after restoring the original flux of 20 L m−2 h−1, indicating the occurrence of biofilm compaction and relaxation. Within a few seconds after the flux change, the biofilm thickness was changed and stabilized, biofilm compaction occurred faster than the relaxation after restoring the original permeate flux. The initial biofilm parameters were not fully reinstated: the biofilm thickness was reduced by 21%, biofilm stiffness had increased and the hydraulic biofilm resistance was elevated by 16%. Biofilm thickness was related to the hydraulic biofilm resistance. Membrane performance losses are related to the biofilm thickness, density and morphology, which are influenced by (variations in) hydraulic conditions. A (temporarily) permeate flux increase caused biofilm compaction, together with membrane performance losses. The impact of biofilms on membrane performance can be influenced (increased and reduced) by operational parameters. The article shows that a (temporary) pressure increase leads to more

  13. Compact Photon Source for Polarized Target Experiments

    Science.gov (United States)

    Niculescu, Gabriel; Wojtsekhowski, Bogdan

    2017-01-01

    High energy photon beams are one of the tools of choice in nuclear and particle physics. However, most of the current techniques used for producing such beams have substantial drawbacks that limit their usefulness (low intensity, large beam size, mixed electron-photon beams). In this presentation we will outline the design of a Compact Photon Source (CPS) capable of providing narrow ( 1 mm) untagged photon beams of an intensity suitable for carrying out polarized target experiments. Compared with existing technology the CPS will provide a substantial (10-100) increase in the figure-of-merit. While optimized for a Wide Angle Compton Scattering experiment proposed at JLab, the source described here can be used in a variety of photon-induced physics experiments as well as for industrial applications.

  14. Ultra-compact plasmonic waveguide modulators

    DEFF Research Database (Denmark)

    Babicheva, Viktoriia

    -compatible materials, both passive and active plasmonic waveguide components are important. Among other proposed plasmonic waveguides and modulators, the structures where the dielectric core is sandwiched between metal plates have been shown as one of the most compact and efficient layout. Because of the tight mode...... confinement that can be achieved in metal-insulator-metal structures, they provide a base for extremely fast and efficient ultracompact plasmonic devices, including modulators, photodetectors, lasers and amplifiers. The main result of this thesis is a systematic study of various designs of plasmonic......Metal-dielectric interfaces can support the waves known as surface plasmon polaritons, which are tightly coupled to the interface and allow manipulation of light at the nanoscale. Plasmonics as a subject which studies such waves enables the merge between two major technologies: nanometer...

  15. Stirling Air Conditioner for Compact Cooling

    Energy Technology Data Exchange (ETDEWEB)

    None

    2010-09-01

    BEETIT Project: Infinia is developing a compact air conditioner that uses an unconventional high efficient Stirling cycle system (vs. conventional vapor compression systems) to produce cool air that is energy efficient and does not rely on polluting refrigerants. The Stirling cycle system is a type of air conditioning system that uses a motor with a piston to remove heat to the outside atmosphere using a gas refrigerant. To date, Stirling systems have been expensive and have not had the right kind of heat exchanger to help cool air efficiently. Infinia is using chip cooling technology from the computer industry to make improvements to the heat exchanger and improve system performance. Infinia’s air conditioner uses helium gas as refrigerant, an environmentally benign gas that does not react with other chemicals and does not burn. Infinia’s improvements to the Stirling cycle system will enable the cost-effective mass production of high-efficiency air conditioners that use no polluting refrigerants.

  16. Formation of High-quality Advanced High-k Oxide Layers at Low Temperature by Excimer UV Lamp-assisted Photo-CVD and Sol-gel Processing

    Institute of Scientific and Technical Information of China (English)

    YU J. J.

    2004-01-01

    We have successfully demonstrated that high quality and high dielectric constant layers can be fabricated by low temperature photo-induced or -assisted processing. Ta2O5 and ZrO2 have been deposited at t<400 ℃by means of a UV photo-CVD technique and HfO2 by photo-assisted sol-gel processing with the aid of excimer lamps. The UV annealing of as-grown layers was found to significantly improve their electrical properties.Low leakage current densities on the order of 10-8 A/cm2 at 1 MV/cm for deposited ultrathin Ta2O5 films and ca. 10-6 A/cm2 for the photo-CVD ZrO2 layers and photo-irradiated sol-gel HfO2 layers have been readily achieved. The improvement in the leakage properties of these layers is attributed to the UV-generated active oxygen species O(1D) which strongly oxidize any suboxides to form more stoichiometric oxides on removing certain defects, oxygen vacancies and impurities present in the as-prepared layers. The photo-CVD Ta2O5films deposited across 10. 16-cm Si wafers exhibit a high thickness uniformity with a variation of less than ±2.0% being obtained for ultrathin ca. 10 nm thick films. The lamp technology can in principle be extended to larger area wafers, providing a promising low temperature route to the fabrication of a range of high quality thin films for future ULSI technology.

  17. The antipodal sets of compact symmetric spaces

    National Research Council Canada - National Science Library

    Liu, Xingda; Deng, Shaoqiang

    2014-01-01

    We study the antipodal set of a point in a compact Riemannian symmetric space. It turns out that we can give an explicit description of the antipodal set of a point in any connected simply connected compact Riemannian symmetric space...

  18. Rate type isotach compaction of consolidated sandstone

    NARCIS (Netherlands)

    Waal, J.A. de; Thienen-Visser, K. van; Pruiksma, J.P.

    2015-01-01

    Laboratory experiments on samples from a consolidated sandstone reservoir are presented that demonstrate rate type compaction behaviour similar to that observed on unconsolidated sands and soils. Such rate type behaviour can have large consequences for reservoir compaction, surface subsidence and

  19. Warm compaction powder metallurgy of Cu

    Institute of Scientific and Technical Information of China (English)

    NGAI Tungwai Leo; WANG Shang-lin; LI Yuan-yuan; ZHOU Zho-yao; CHEN Wei-ping

    2005-01-01

    A series of experiments were carried out using different admixed lubricant contents,different compaction pressures and temperatures in order to study the warm compaction of copper powder.Results show that too much admixed lubricant will lead to the squeeze out of the lubricant from the compact during the warm compaction processing of Cu powder.Results also show that blisters can be found in sintered samples that contain lubricant less than 0.15% (mass fraction).Optimal warm compaction parameters for producing high density powder metallurgy copper material are obtained.Compacts with green density of 8.6 g/cm3 and a sintered density of 8.83 g/cm3 can be produced by warm compacting the Cu powder,which contains 0.2% admixed lubricant,and is compacted at 145 ℃ with a pressure of 700 Mpa.

  20. Towards establishing compact imaging spectrometer standards

    Science.gov (United States)

    Slonecker, E. Terrence; Allen, David W.; Resmini, Ronald G.

    2016-01-01

    Remote sensing science is currently undergoing a tremendous expansion in the area of hyperspectral imaging (HSI) technology. Spurred largely by the explosive growth of Unmanned Aerial Vehicles (UAV), sometimes called Unmanned Aircraft Systems (UAS), or drones, HSI capabilities that once required access to one of only a handful of very specialized and expensive sensor systems are now miniaturized and widely available commercially. Small compact imaging spectrometers (CIS) now on the market offer a number of hyperspectral imaging capabilities in terms of spectral range and sampling. The potential uses of HSI/CIS on UAVs/UASs seem limitless. However, the rapid expansion of unmanned aircraft and small hyperspectral sensor capabilities has created a number of questions related to technological, legal, and operational capabilities. Lightweight sensor systems suitable for UAV platforms are being advertised in the trade literature at an ever-expanding rate with no standardization of system performance specifications or terms of reference. To address this issue, both the U.S. Geological Survey and the National Institute of Standards and Technology are eveloping draft standards to meet these issues. This paper presents the outline of a combined USGS/NIST cooperative strategy to develop and test a characterization methodology to meet the needs of a new and expanding UAV/CIS/HSI user community.

  1. Compact SMES with a superconducting film in a spiral groove on a Si wafer formed by MEMS technology with possible high-energy storage volume density comparable to that of rechargeable batteries

    Science.gov (United States)

    Sugimoto, N.; Iguchi, N.; Kusano, Y.; Fukano, T.; Hioki, T.; Ichiki, A.; Bessho, T.; Motohiro, T.

    2017-01-01

    The concept of a novel approach to make a compact SMES unit composed of a stack of Si wafers using a well-established MEMS process was proposed. The concept was backed up by pilot estimations for energy storage capacity and mechanical strength to endure electromagnetic stress. The estimated volume density of the storable energy is comparable to that of rechargeable batteries and the mechanical strength of Si wafer endures the electromagnetic stress imposed on it. These estimations support the feasibility of this novel concept, although there needs to be more detailed design of the system for its practical realization. Furthermore, there are a lot of challenges to overcome. The first step of the experimental proof of this new concept was successfully performed through several repeated test fabrications. In one of these test fabrications, the theoretically estimated upper limit value of the energy storage corresponding to a pilot design of a spiral superconducting NbN coil in the spiral trench formed on a Si wafer 10.15 cm in diameter was attained.

  2. Explore the Key Technologies of Impact Compaction Construction with Coal Gangue to Fill the Subgrade%煤矸石填筑路基冲击压实施工关键技术研究

    Institute of Scientific and Technical Information of China (English)

    罗开权

    2013-01-01

    The accumulation and spontaneous combustion of a large number coal gangue had a tremendous impact on the society and the environment. Using gangue subgrade can save earth and improve the problems of land occupation and enviro-nmental pol ution in the road construction. In this article, the author against the background of highway engineering to anal-yzes the impact compaction of coal gangue fil ing subgrade co-nstruction.%  煤矸石大量的堆积和自燃,给社会和环境造成了极大影响。公路建设中利用煤矸石填筑路基,节省了土方,改善了占用土地和环境污染等问题。本文以高速公路工程为背景,分析了煤矸石填筑路基施工中的冲击压实情况。

  3. The Kolmogorov-Riesz compactness theorem

    CERN Document Server

    Hanche-Olsen, Harald

    2009-01-01

    We show that the Arzela-Ascoli theorem and Kolmogorov compactness theorem both are consequences of a simple lemma on compactness in metric spaces. Their relation to Helly's theorem is discussed. The paper contains a detailed discussion on the historical background of the Kolmogorov compactness theorem.

  4. Equationally Compact Acts : Coproducts / Peeter Normak

    Index Scriptorium Estoniae

    Normak, Peeter

    1998-01-01

    In this article equational compactness of acts and its generalizations are discussed. As equational compactness does not carry over to coproducts a slight generalization of c-equational campactness is introduced. It is proved that a coproduct of acts is c-equationally compact if and only if all components are c-equationally campact

  5. Equationally Compact Acts : Coproducts / Peeter Normak

    Index Scriptorium Estoniae

    Normak, Peeter

    1998-01-01

    In this article equational compactness of acts and its generalizations are discussed. As equational compactness does not carry over to coproducts a slight generalization of c-equational campactness is introduced. It is proved that a coproduct of acts is c-equationally compact if and only if all components are c-equationally campact

  6. Formation and evolution of compact binaries

    NARCIS (Netherlands)

    Sluijs, Marcel Vincent van der

    2006-01-01

    In this thesis we investigate the formation and evolution of compact binaries. Chapters 2 through 4 deal with the formation of luminous, ultra-compact X-ray binaries in globular clusters. We show that the proposed scenario of magnetic capture produces too few ultra-compact X-ray binaries to explain

  7. Compact lanthanum hexaboride hollow cathode.

    Science.gov (United States)

    Goebel, Dan M; Watkins, Ronald M

    2010-08-01

    A compact lanthanum hexaboride hollow cathode has been developed for space applications where size and mass are important and research and industrial applications where access for implementation might be limited. The cathode design features a refractory metal cathode tube that is easily manufactured, mechanically captured orifice and end plates to eliminate expensive e-beam welding, graphite sleeves to provide a diffusion boundary to protect the LaB6 insert from chemical reactions with the refractory metal tube, and several heater designs to provide long life. The compact LaB(6) hollow cathode assembly including emitter, support tube, heater, and keeper electrode is less than 2 cm in diameter and has been fabricated in lengths of 6-15 cm for different applications. The cathode has been operated continuously at discharge currents of 5-60 A in xenon. Slightly larger diameter versions of this design have operated at up to 100 A of discharge current.

  8. Target-local Gromov compactness

    CERN Document Server

    Fish, Joel W

    2009-01-01

    We prove a version of Gromov's compactness theorem for pseudo-holomorphic curves which holds locally in the target symplectic manifold. This result applies to sequences of curves with an unbounded number of free boundary components, and in families of degenerating target manifolds which have unbounded geometry (e.g. no uniform energy threshold). Core elements of the proof regard curves as submanifolds (rather than maps) and then adapt methods from the theory of minimal surfaces.

  9. Multipole structure of compact objects

    CERN Document Server

    Quevedo, Hernando

    2016-01-01

    We analyze the applications of general relativity in relativistic astrophysics in order to solve the problem of describing the geometric and physical properties of the interior and exterior gravitational and electromagnetic fields of compact objects. We focus on the interpretation of exact solutions of Einstein's equations in terms of their multipole moments structure. In view of the lack of physical interior solutions, we propose an alternative approach in which higher multipoles should be taken into account.

  10. Weak compactness of biharmonic maps

    Directory of Open Access Journals (Sweden)

    Shenzhou Zheng

    2012-10-01

    Full Text Available This article shows that if a sequence of weak solutions of a perturbed biharmonic map satisfies $Phi_ko 0$ in $(W^{2,2}^*$ and $u_kightharpoonup u$ weakly in $W^{2,2}$, then $u$ is a biharmonic map. In particular, we show that the space of biharmonic maps is sequentially compact under the weak-$W^{2,2}$ topology.

  11. Compact differences of composition operators

    CERN Document Server

    Heller, Katherine; Weir, Rachel J

    2010-01-01

    When $\\varphi$ and $\\psi$ are linear-fractional self-maps of the unit ball $B_N$ in ${\\mathbb C}^N$, $N\\geq 1$, we show that the difference $C_{\\varphi}-C_{\\psi}$ cannot be non-trivially compact on either the Hardy space $H^2(B_N)$ or any weighted Bergman space $A^2_{\\alpha}(B_N)$. Our arguments emphasize geometrical properties of the inducing maps $\\varphi$ and $\\psi$.

  12. 78 FR 61384 - Meeting of the Compact Council for the National Crime Prevention and Privacy Compact

    Science.gov (United States)

    2013-10-03

    ... Federal Bureau of Investigation Meeting of the Compact Council for the National Crime Prevention and... of this notice is to announce a meeting of the National Crime Prevention and Privacy Compact Council (Council) created by the National Crime Prevention and Privacy Compact Act of 1998 (Compact). Thus far,...

  13. 78 FR 20355 - Meeting of the Compact Council for the National Crime Prevention and Privacy Compact

    Science.gov (United States)

    2013-04-04

    ... Federal Bureau of Investigation Meeting of the Compact Council for the National Crime Prevention and... this notice is to announce a meeting of the National Crime Prevention and Privacy Compact Council (Council) created by the National Crime Prevention and Privacy Compact Act of 1998 (Compact). Thus far,...

  14. 77 FR 60475 - Meeting of the Compact Council for the National Crime Prevention and Privacy Compact

    Science.gov (United States)

    2012-10-03

    ... Federal Bureau of Investigation Meeting of the Compact Council for the National Crime Prevention and... of this notice is to announce a meeting of the National Crime Prevention and Privacy Compact Council (Council) created by the National Crime Prevention and Privacy Compact Act of 1998 (Compact). Thus far,...

  15. 76 FR 20044 - Meeting of the Compact Council for the National Crime Prevention and Privacy Compact

    Science.gov (United States)

    2011-04-11

    ... Federal Bureau of Investigation Meeting of the Compact Council for the National Crime Prevention and... this notice is to announce a meeting of the National Crime Prevention and Privacy Compact Council (Council) created by the National Crime Prevention and Privacy Compact Act of 1998 (Compact). Thus far,...

  16. 75 FR 62568 - Meeting of the Compact Council for the National Crime Prevention and Privacy Compact

    Science.gov (United States)

    2010-10-12

    ... Federal Bureau of Investigation Meeting of the Compact Council for the National Crime Prevention and... this notice is to announce a meeting of the National Crime Prevention and Privacy Compact Council (Council) created by the National Crime Prevention and Privacy Compact Act of 1998 (Compact). Thus far,...

  17. 76 FR 66326 - Meeting of the Compact Council for the National Crime Prevention and Privacy Compact

    Science.gov (United States)

    2011-10-26

    ... Federal Bureau of Investigation Meeting of the Compact Council for the National Crime Prevention and... this notice is to announce a meeting of the National Crime Prevention and Privacy Compact Council (Council) created by the National Crime Prevention and Privacy Compact Act of 1998 (Compact). Thus far,...

  18. 77 FR 20051 - Meeting of the Compact Council for the National Crime Prevention and Privacy Compact

    Science.gov (United States)

    2012-04-03

    ... Federal Bureau of Investigation Meeting of the Compact Council for the National Crime Prevention and... this notice is to announce a meeting of the National Crime Prevention and Privacy Compact Council (Council) created by the National Crime Prevention and Privacy Compact Act of 1998 (Compact). Thus far,...

  19. Strings in compact cosmological spaces

    CERN Document Server

    Craps, Ben; Konechny, Anatoly

    2013-01-01

    We confront the problem of giving a fundamental definition to perturbative string theory in spacetimes with totally compact space (taken to be a torus for simplicity, though the nature of the problem is very general) and non-compact time. Due to backreaction induced by the presence of even a single string quantum, the usual formulation of perturbative string theory in a fixed classical background is infrared-divergent at all subleading orders in the string coupling, and needs to be amended. The problem can be seen as a closed string analogue of D0-brane recoil under an impact by closed strings (a situation displaying extremely similar infrared divergences). Inspired by the collective coordinate treatment of the D0-brane recoil, whereby the translational modes of the D0-brane are introduced as explicit dynamical variables in the path integral, we construct a similar formalism for the case of string-induced gravitational backreaction, in which the spatially uniform modes of the background fields on the compact ...

  20. Comminution circuits for compact itabirites

    Directory of Open Access Journals (Sweden)

    Pedro Ferreira Pinto

    Full Text Available Abstract In the beneficiation of compact Itabirites, crushing and grinding account for major operational and capital costs. As such, the study and development of comminution circuits have a fundamental importance for feasibility and optimization of compact Itabirite beneficiation. This work makes a comparison between comminution circuits for compact Itabirites from the Iron Quadrangle. The circuits developed are: a crushing and ball mill circuit (CB, a SAG mill and ball mill circuit (SAB and a single stage SAG mill circuit (SSSAG. For the SAB circuit, the use of pebble crushing is analyzed (SABC. An industrial circuit for 25 million tons of run of mine was developed for each route from tests on a pilot scale (grinding and industrial scale. The energy consumption obtained for grinding in the pilot tests was compared with that reported by Donda and Bond. The SSSAG route had the lowest energy consumption, 11.8kWh/t and the SAB route had the highest energy consumption, 15.8kWh/t. The CB and SABC routes had a similar energy consumption of 14.4 kWh/t and 14.5 kWh/t respectively.

  1. The effect on the ultrastructure of dental enamel of excimer-dye, argon-ion and CO2 lasers.

    Science.gov (United States)

    Palamara, J; Phakey, P P; Orams, H J; Rachinger, W A

    1992-12-01

    This study aimed to investigate the ultrastructural changes that occur in dental enamel irradiated with pulsed excimer-dye, continuous-wave (CW) argon-ion and CW CO2 lasers. The pulsed excimer-dye laser produced deep craters, rough damaged surfaces with underlying porosity and amorphous vitrified material. The vitrification of the enamel indicated that the temperature in these areas must have been at least in the range 1280 to 1600 degrees C. The CW argon-ion laser irradiation produced a changed non-cratered surface with inter-crystalline porosity and a mixture of small and some large irregularly packed recrystallized enamel crystals. The CW CO2 laser produced shallow craters, surface crazing and lifting off the removal of the surface layer to expose the underlying roughened enamel. The ultrastructure revealed inter- and intra-crystalline porosity, a mixture of small but variable size irregularly packed recrystallized enamel crystals and also well packed large crystals which indicated further grain growth. The porosity in lased enamel was overall very similar to that seen in enamel heated in an electric furnace to a temperature of 600 degrees C. The presence of recrystallized enamel crystals indicated a temperature rise of approximately 1000 degrees C and the grain growth indicated that a temperature > or = 1000 degrees C existed for some time after the laser irradiation. In general the excimer-dye laser produced most surface destruction because of its higher power density and shorter interaction time and the argon-ion laser produced least damage. These results indicated that the lasers used in this study require much more refinement before they can find therapeutic application to dental enamel, and this may well be the case for other lasers being investigated for clinical dental practise.

  2. Viscosity dependence of intramolecular excimer formation with 1,5-bis(1-pyrenylcarboxy)pentane in alkane solvents as a function of temperature.

    Science.gov (United States)

    Maçanita, António L; Zachariasse, Klaas A

    2011-04-21

    Intramolecular excimer formation with 1,5-bis(1-pyrenylcarboxy)pentane, (1PC(5)1PC) is studied as a function of temperature in a series of alkane solvents and in toluene, covering a wide range of solvent viscosities η, from 0.2 to 125 cP. The rate constant k(a) of the monomer → excimer reaction is determined from the effectively single exponential monomer fluorescence decays. For the viscosity dependence of k(a) in n-alkanes, the Stokes-Einstein relation k(a) ∼ η(-1.0) does not hold. Instead, k(a) is proportional to η(-α), with α increasing upon cooling, from 0.56 at 85 °C to 0.86 at -30 °C. The activation energy E(a) of excimer formation with 1PC(5)1PC, always larger than the activation energy E(T/η) of solvent viscous flow, decreases when the solvent viscosity becomes smaller, from 20.7 kJ/mol in n-hexadecane to 11.8 kJ/mol in n-butane, approaching a value of 11-12 kJ/mol for the low viscosity solvents. As the excimer formation process depends on the restricted diffusion of the 1PC end groups as well as on the C-O and C-C rotations in the -O(CH(2))(5)O- chain, the limiting barrier of 11-12 kJ/mol is attributed to the activation energy E(c) of the multiple bond rotations. This fractional viscosity dependence (α < 1.0) is caused by the multidimensional character of the barrier crossing in the excimer formation process. This multidimensional character should also be taken into account in investigations of polymers and biological media employing excimer formation.

  3. Outcomes of excimer laser enhancements in pseudophakic patients with multifocal intraocular lens

    Science.gov (United States)

    Schallhorn, Steven C; Venter, Jan A; Teenan, David; Schallhorn, Julie M; Hettinger, Keith A; Hannan, Stephen J; Pelouskova, Martina

    2016-01-01

    Purpose The aim of this study was to assess visual and refractive outcomes of laser vision correction (LVC) to correct residual refraction after multifocal intraocular lens (IOL) implantation. Patients and methods In this retrospective study, 782 eyes that underwent LVC to correct unintended ametropia after multifocal IOL implantation were evaluated. Of all multifocal lenses implanted during primary procedure, 98.7% were refractive and 1.3% had a diffractive design. All eyes were treated with VISX STAR S4 IR excimer laser using a convectional ablation profile. Refractive outcomes, visual acuities, patient satisfaction, and quality of life were evaluated at the last available visit. Results The mean time between enhancement and last visit was 6.3±4.4 months. Manifest spherical equivalent changed from −0.02±0.83 D (−3.38 D to +2.25 D) pre-enhancement to 0.00±0.34 D (−1.38 D to +1.25 D) post-enhancement. At the last follow-up, the percentage of eyes within 0.50 D and 1.00 D of emmetropia was 90.4% and 99.5%, respectively. Of all eyes, 74.9% achieved monocular uncorrected distance visual acuity 20/20 or better. The mean corrected distance visual acuity remained the same before (−0.04±0.06 logMAR [logarithm of the minimum angle of resolution]) and after LVC procedure (−0.04±0.07 logMAR; P=0.70). There was a slight improvement in visual phenomena (starburst, halo, glare, ghosting/double vision) following the enhancement. No sight-threatening complications related to LVC occurred in this study. Conclusion LVC in pseudophakic patients with multifocal IOL was safe, effective, and predictable in a large cohort of patients. PMID:27175059

  4. Numerical analysis of excimer laser-induced breakdown of Kr gas

    Science.gov (United States)

    Hamam, Kholoud A.; Elsayed, Khaled A.; Gamal, Yosr E. E.

    2017-03-01

    The present paper displays a numerical study on the role of electron dynamics in relation to the dependence of the threshold intensity on the pressure in the breakdown of gases by laser radiation. The analysis aimed to find out the origin of the steep slope observed in the measurements of threshold intensity against gas pressure in the breakdown of Kr induced by an excimer laser source (Opt. Commun. 13:66-68, 1). The experiment was carried out using wavelength 248 nm and pulse width of 18 ns for a gas pressure range 4.5-300 torr. The investigation centered on an adaptation of our previously developed electron cascade model given in Evans and Gamal (J. Phys. D Appl. Phys. 13:1447-1458, 2). This model solves numerically a time-dependent energy equation simultaneously with a set of rate equations that describe the change of the population of the formed excited states. The modifications introduced into the model the realistic structure of the krypton gas atom as well as electron diffusion as a loss process to inspect the experimentally tested low-pressure regime. A computer program is undertaken to determine the breakdown threshold intensity as a function of gas pressure. Reasonable agreement is obtained between the calculated thresholds and measured ones, corresponding to the examined pressure range. This agreement validates the applicability of the model. The relationship between the role of the physical mechanisms and gas pressure is studied by analyzing the EEDF and its parameters at selected pressure values that cover the experimentally tested range. The result of this study clarified that electron diffusion out of the focal region is responsible for the steep slope of the threshold intensities for pressures values showed non-Maxwellian distribution as well as determined the time and energy region at which breakdown is formed.

  5. Effects of Plasma Formation on the Cesium Diode (DPAL) and Excimer (XPAL) Pumped Alkali Laser

    Science.gov (United States)

    Markosyan, Aram H.; Kushner, Mark J.

    2015-09-01

    Diode pumped alkali lasers (DPALs) and excimer pumped alkali lasers (XPALs) are being investigated as a means to convert optical pumps having poor optical quality to laser radiation having high optical quality. DPALs sustained in Cs vapor are pumped on the D2(852.35 nm), Cs(62S1/2) --> Cs(62P3/2) , transition and lase on the D1(894.59 nm) transition, Cs(62P1/2) --> Cs(62S1/2) . Collisional mixing (spin orbit relaxation) of the Cs(62P3/2) and Cs(62P1/2) levels is a key part of this three-level (in fact, a quasi-two-level) laser scheme. In the five-level XPAL pumping scheme, the CsAr(B2Σ1/ 2 +) state is optically pumped by 836.7 nm pulses, which later dissociates and produces Cs(62P3/2) . As in DPAL, a collisional relaxant transfers the population of Cs(62P3/2) to Cs(62P1/2) , which enables lasing on D1 transition. A first principals global computer model has been developed for both systems to investigate the effects of plasma formation on the laser performance. Argon is used as a buffer gas and nitrogen or ethane are used as a collisional relaxant at total pressure of 600 Torr at temperatures of 350-450 K, which produces vapor pressures of Cs of systems, a plasma formation in excess of 1014 - 1016cm-3 occurs, which potentially reduces laser output power by electron collisional mixing of upper and lower laser levels. Work supported by DoD High Energy Laser Multidisc, Res. Initiative.

  6. Traitement superficiel d'acier par laser excimère

    Science.gov (United States)

    Pereira, A.; Cros, A.; Delaporte, Ph.; Marine, W.; Sentis, M.

    2003-06-01

    Motivée par des nécessités économiques et environnementales, l'industrie est amenée à développer de nouveaux procédés propres, notamment pour les applications concernant la préparation de surface (nettoyage, décapage...). Dans ce domaine, l'utilisation du laser excinière présente de nombreux avantages. En effet, en raison d'un temps d'interaction de courte durée (ns), suivi d'un échauffement et d'un refroidissement rapide de la zone irradiée sur une profondeur très fine (μm), il est possible de modifier localement les propriétés physico-chimiques d'une surface sans changer les propriétés intrinsèques du matériau. Le but de nos travaux a consisté en l'étude des effets d'un traitement par laser excimère (XeCI) sur les propriétés chimiques (XPS et AES), structurales (XRD et GIXRD) et morphologiques (MEB) de surface d'acier. Outre le nettoyage de la surface, les analyses chimiques réalisées sur de l'acier ont mis en évidence pour des densités d'énergie importantes la formation d'une couche de Fe2O3 au détriment de FeOOH. Les observations MEB ont révélé la création de structures sphériques nanométriques. Ce traitement permet notamment d'améliorer la tenue à la corrosion de la surface.

  7. Mechanisms and application of the Excimer laser doping from spin-on glass sources for USJ fabrication

    Energy Technology Data Exchange (ETDEWEB)

    Coutanson, S. [InESS, 23 rue du Loess BP20 CR, F-67037 Strasbourg Cedex 2 (France); Fogarassy, E. [InESS, 23 rue du Loess BP20 CR, F-67037 Strasbourg Cedex 2 (France); Venturini, J. [SOPRA-SA, 26 rue Pierre Joigneaux, 92270 Bois-Colombes (France)

    2006-04-30

    In this work was investigated numerically and experimentally a simple laser doping method employing borosilicate (BSG) glass films as dopant sources which are deposited onto Si by the spin-coating technique. Both short (20 ns) and long (200 ns) pulse duration Excimer laser beams were used to deposit a large amount of energy in short time onto the near-surface region. Under suitable conditions, the irradiation leads to surface melting and dopant incorporation by liquid phase diffusion from the surface. Boron distribution profiles in the two-pulse duration regimes were studied as well as their electrical properties, and the junction formation of less than 25 nm in depth was demonstrated.

  8. Four-year to seven-year outcomes of advanced surface ablation with excimer laser for high myopia

    DEFF Research Database (Denmark)

    Hansen, Rasmus Søgaard; Lyhne, Niels; Grauslund, Jakob

    2015-01-01

    Purpose: To evaluate and compare long-term outcomes ofafter photorefractive keratectomy with cooling (cPRK) and laser-assisted subepithelial keratectomy (LASEK) for high myopia. Methods: Retrospective single-masked follow-up study of patients treated for myopia between 2007 and 2009 with c......PRK or LASEK, using a high-frequency flying-spot excimer laser with eye-tracker (MEL80; Carl Zeiss, Jena, Germany). One eye of each patient was randomly chosen for analysis. Re-treated eyes were excluded. Results: Forty-six cPRK patients and 35 LASEK patients were included. Spherical equivalent averaged -7...

  9. 高海拔地区碾压式沥青混凝土心墙施工技术--以旁多水利枢纽大坝为例%Construction technology of roller-compacted asphalt concrete core walls in high-altitude areas:A case study of dams in Pangduo Hydraulic Project

    Institute of Scientific and Technical Information of China (English)

    向尚君; 石林; 廖佼

    2014-01-01

    为总结碾压式沥青混凝土心墙在高海拔地区的施工经验,以首次在西藏高海拔地区应用的西藏旁多水利枢纽大坝碾压式沥青混凝土心墙施工为例,从原材料、施工机械设备、沥青混合料施工配合比、沥青混合料拌和、沥青混凝土心墙施工方法、温度控制及防护措施等方面针对制约高海拔地区碾压式沥青混凝土心墙施工的主要问题进行了总结,指出高地震烈度、强紫外线辐射、深覆盖层、高寒等地质和气候特点是制约高海拔地区碾压式沥青混凝土心墙施工的主要问题,初步探寻出了加大沥青含量提高变形能力、采用帆布覆盖措施防止紫外线辐射、采取棉被和砂砾石覆盖措施进行保温等解决方法,并在旁多水利枢纽大坝碾压式沥青混凝土心墙施工中得到成功应用。%In order to summarize the construction experience of roller-compacted asphalt concrete core walls in high-altitude areas, the construction of core walls of the dams in the Pangduo Hydraulic Project, which were first used in the high-altitude area in Tibet, was taken as an instance. The construction technology for the roller-compacted hydraulic asphalt concrete cores in high-altitude areas is discussed, including raw materials, construction machinery and equipment, the construction mixing ratio of the asphalt mixture, the mixing technology of the asphalt mixture, construction methods of asphalt concrete core walls, temperature control and protective measures. It is concluded that geological and climatic characteristics such as high seismic intensity, strong ultraviolet radiation, deep overburden, and the extremely cold climate mainly affected the construction of roller-compacted asphalt concrete core walls in high-altitude areas. Methods to solve these problems are proposed, such as improving the deformation capacity by increasing the asphalt content, preventing ultraviolet radiation by using a

  10. Compact high performance spectrometers using computational imaging

    Science.gov (United States)

    Morton, Kenneth; Weisberg, Arel

    2016-05-01

    Compressive sensing technology can theoretically be used to develop low cost compact spectrometers with the performance of larger and more expensive systems. Indeed, compressive sensing for spectroscopic systems has been previously demonstrated using coded aperture techniques, wherein a mask is placed between the grating and a charge coupled device (CCD) and multiple measurements are collected with different masks. Although proven effective for some spectroscopic sensing paradigms (e.g. Raman), this approach requires that the signal being measured is static between shots (low noise and minimal signal fluctuation). Many spectroscopic techniques applicable to remote sensing are inherently noisy and thus coded aperture compressed sensing will likely not be effective. This work explores an alternative approach to compressed sensing that allows for reconstruction of a high resolution spectrum in sensing paradigms featuring significant signal fluctuations between measurements. This is accomplished through relatively minor changes to the spectrometer hardware together with custom super-resolution algorithms. Current results indicate that a potential overall reduction in CCD size of up to a factor of 4 can be attained without a loss of resolution. This reduction can result in significant improvements in cost, size, and weight of spectrometers incorporating the technology.

  11. Der Global Compact und der Schutz der Menschenrechte

    OpenAIRE

    Hamm, Brigitte I.

    2011-01-01

    Inhalt: - I. Einleitung - II. Was ist der Global Compact? - III. Wie funktioniert der Global Compact? - IV. Der Global Compact will kein Verhaltenskodex sein. - V. Der Global Compact als Bestandteil von „global governance“ - VI. Der Global Compact und der Schutz der Menschenrechte - VII. Ausschau - Literatur - Teilnehmer des Global Compact

  12. Self-compacting concrete (SCC)

    DEFF Research Database (Denmark)

    Geiker, Mette Rica

    2008-01-01

    In many aspects Self-Compacting Concrete (SCC, “Self-Consolidating Concrete” in North America) can be considered the concrete of the future. SCC is a family of tailored concretes with special engineered properties in the fresh state. SCC flows into the formwork and around even complicated...... reinforcement arrangements under its own weight. Thus, SCC is not vibrated like conventional concrete. This drastically improves the working environment during construction, the productivity, and potentially improves the homogeneity and quality of the concrete. In addition SCC provides larger architectural...

  13. Porewater chemistry in compacted bentonite

    Energy Technology Data Exchange (ETDEWEB)

    Muurinen, A.; Lehikoinen, J. [VTT Chemical Technology, Espoo (Finland)

    1999-03-01

    In this study, the porewater chemistry in compacted bentonite, considered as an engineered barrier in the repository of spent fuel, has been studied in interaction experiments. Many parameters, like the composition and density of bentonite, composition of the solution, bentonite-to-water ratio (B/W), surrounding conditions and experimental time have been varied in the experiments. At the end of the interaction the equilibrating solution, the porewaters squeezed out of the bentonite samples, and bentonites themselves were analyzed to give information for the interpretation and modelling of the interaction. Equilibrium modelling was performed with the HYDRAQL/CE computer code 33 refs.

  14. Compact Radiometers Expand Climate Knowledge

    Science.gov (United States)

    2010-01-01

    To gain a better understanding of Earth's water, energy, and carbon cycles, NASA plans to embark on the Soil Moisture Active and Passive mission in 2015. To prepare, Goddard Space Flight Center provided Small Business Innovation Research (SBIR) funding to ProSensing Inc., of Amherst, Massachusetts, to develop a compact ultrastable radiometer for sea surface salinity and soil moisture mapping. ProSensing incorporated small, low-cost, high-performance elements into just a few circuit boards and now offers two lightweight radiometers commercially. Government research agencies, university research groups, and large corporations around the world are using the devices for mapping soil moisture, ocean salinity, and wind speed.

  15. Compact Hermitian Young Projection Operators

    CERN Document Server

    Alcock-Zeilinger, Judith

    2016-01-01

    In this paper, we describe a compact and practical algorithm to construct Hermitian Young projection operators for irreducible representations of the special unitary group SU(N), and discuss why ordinary Young projection operators are unsuitable for physics applications. The proof of this construction algorithm uses the iterative method described by Keppeler and Sj\\"odahl. We further show that Hermitian Young projection operators share desirable properties with Young tableaux, namely a nested hierarchy when "adding a particle". We end by exhibiting the enormous advantage of the Hermitian Young projection operators constructed in this paper over those given by Keppeler and Sj\\"odahl.

  16. Compact objects in Horndeski gravity

    CERN Document Server

    Silva, Hector O; Minamitsuji, Masato; Berti, Emanuele

    2016-01-01

    Horndeski gravity holds a special position as the most general extension of Einstein's theory of general relativity with a single scalar degree of freedom and second-order field equations. Because of these features, Horndeski gravity is an attractive phenomenological playground to investigate the consequences of modifications of general relativity in cosmology and astrophysics. We present a review of the progress made so far in the study of compact objects (black holes and neutron stars) within Horndeski gravity. In particular, we review our recent work on slowly rotating black holes and present some new results on slowly rotating neutron stars.

  17. Excimer laser assisted re-oxidation of BaTiO{sub 3} thin films on Ni metal foils

    Energy Technology Data Exchange (ETDEWEB)

    Bharadwaja, S. S. N., E-mail: s.s.n.bharadwaja@gmail.com; Ko, S. W.; Qu, W.; Clark, T. [Materials Research Institute, The Pennsylvania State University, University Park, Pennsylvania 16802 (United States); Rajashekhar, A. [Materials Science and Engineering Department, The Pennsylvania State University, University Park, Pennsylvania 16802 (United States); Motyka, M. [Department of Engineering Science and Mechanics, The Pennsylvania State University, University Park, Pennsylvania 16802 (United States); Podraza, N. [Department of Physics and Astronomy, University of Toledo, Toledo, Ohio 43606 (United States); Wright Center for Photovoltaics Innovation and Commercialization, University of Toledo, Toledo, Ohio 43606 (United States); Randall, C. A.; Trolier-McKinstry, S. [Materials Research Institute, The Pennsylvania State University, University Park, Pennsylvania 16802 (United States); Materials Science and Engineering Department, The Pennsylvania State University, University Park, Pennsylvania 16802 (United States)

    2016-01-14

    Excimer laser assisted re-oxidation for reduced, crystallized BaTiO{sub 3} thin films on Ni-foils was investigated. It was found that the BaTiO{sub 3} can be re-oxidized at an oxygen partial pressure of ∼50 mTorr and substrate temperature of 350 °C without forming a NiO{sub x} interface layer between the film and base metal foil. The dielectric permittivity of re-oxidized films was >1000 with loss tangent values <2% at 100 Hz, 30 mV{sub rms} excitation signal. Electron Energy Loss Spectroscopy indicated that BaTiO{sub 3} thin films can be re-oxidized to an oxygen stoichiometry close to ∼3 (e.g., stoichiometric). High resolution cross sectional transmission electron microscopy showed no evidence of NiO{sub x} formation between the BaTiO{sub 3} and the Ni foil upon excimer laser re-oxidation. Spectroscopic ellipsometry studies on laser re-oxidized [001]{sub C} and [111]{sub C} BaTiO{sub 3} single crystals indicate that the re-oxidation of BaTiO{sub 3} single crystals is augmented by photo-excitation of the ozone, as well as laser pulse induced temperature and local stress gradients.

  18. [Relationship between corneal surface temperature and air flow conditions during refractive laser eye surgery using three different excimer lasers].

    Science.gov (United States)

    Szekrényesi, Csaba; Sándor, Gábor László; Gyenes, Andrea; Kiss, Huba; Filkorn, Tamás; Nagy, Zoltán

    2016-10-01

    Thermal conditions during photorefractive keratectomy might be an important issue related to the corneal wound healing and long-term outcomes. Authors tried to find out the importance of temperature conditions during the treatment. One eye of 90 patients has been included into the study. Photorefractive keratoctomy was applied with Carl Zeiss MEL 70, MEL 80 and Wavelight Allegretto excimer lasers. EBRO TLC 730 infrared thermometer was used for the measurement of surface temperature of the cornea before epithelial removal, as well as before and after the treatment. Average age of the patients was 25.5 ± 3 yr. Average myopic correction was -3.2 ± 0.8 Dpt. Statistically significant difference was found in temperature change between MEL 80 and the other two types of excimer laser devices. Different air flow conditions of the smoke removal system might have an influence on changes of the corneal temperature during treatment, but the refractive results were not influenced by this issue. Orv. Hetil., 2016, 157(43), 1717-1721.

  19. Preparatory study for detection of nickel in industrial flue gas by excimer laser-induced fragmentation fluorescence spectroscopy.

    Science.gov (United States)

    Gottwald, U; Monkhouse, P

    2003-02-01

    The purpose of this work is to survey possibilities for detecting molecular nickel species in industrial flue gas using excimer laser-induced fragmentation fluorescence (ELIF), in particular to establish suitable detection schemes and to obtain a sensitivity estimate for Ni detection. Investigations were conducted in a heated laboratory cell under defined conditions of temperature and pressure, using NiCl2 as the precursor molecule. An ArF excimer laser (193 nm) was used for excitation and Ni atomic emission spectra were recorded in the range 300 to 550 nm. The dependence of ELIF signal on laser fluence was quadratic in the range of laser intensities investigated, as expected for a two-photon excitation process. The temporal behavior of the ELIF signals gave lifetimes significantly longer than the known natural lifetimes. This result and the energetics of the system suggest a Ni* production mechanism involving the formation of Ni+ and subsequent ion-electron recombination. The temperature dependence of the ELIF signal, determined in the range 773 to 1223 K, was found to follow the vapor-pressure curve (Antoine equation) known from the literature. Finally, quenching effects were investigated by measuring ELIF signals and lifetimes in nitrogen or air up to 1 atm. On the basis of the results so far, detection limits for Ni in practical combustion applications in the range of tens of ppb should be achievable, which will be sufficient for regulatory measurements in incinerators and power plants.

  20. Analysis of damage threshold of K9 glass irradiated by 248-nm KrF excimer laser

    Science.gov (United States)

    Wang, Xi; Shao, Jingzhen; Li, Hua; Nie, Jinsong; Fang, Xiaodong

    2016-02-01

    The theoretical model of K9 glass irradiated by a 248-nm KrF excimer laser was established, and a numerical simulation was performed to calculate temperature and thermal stress fields in the K9 glass sample using the finite element method. The laser-induced damage thresholds were defined and calculated, and the effect of repetition frequency and the number of pulses on the damage threshold were also studied. Furthermore, the experiment research was carried out to confirm the numerical simulation. The damage threshold and damage morphology were analyzed by means of a metallurgical microscope and scanning electron microscopy. The simulation and experimental results indicated that the damage mechanism of K9 glass irradiated by a KrF excimer laser was melting damage and stress damage, and the stress damage first appeared inside the K9 glass sample. The tensile stress damage threshold, the compressive stress damage threshold, and the melting damage threshold were 0.64, 0.76, and 1.05 J/cm2, respectively. The damage threshold decreased with increasing repetition frequency and number of laser pulses. The experimental results indicated that the damage threshold of K9 glass was 2.8 J/cm2.