WorldWideScience

Sample records for technology collaborative systems

  1. Essential technologies for developing human and robot collaborative system

    International Nuclear Information System (INIS)

    Ishikawa, Nobuyuki; Suzuki, Katsuo

    1997-10-01

    In this study, we aim to develop a concept of new robot system, i.e., 'human and robot collaborative system', for the patrol of nuclear power plants. This paper deals with the two essential technologies developed for the system. One is the autonomous navigation program with human intervention function which is indispensable for human and robot collaboration. The other is the position estimation method by using gyroscope and TV image to make the estimation accuracy much higher for safe navigation. Feasibility of the position estimation method is evaluated by experiment and numerical simulation. (author)

  2. International energy technology collaboration: wind power integration into electricity systems

    International Nuclear Information System (INIS)

    Justus, D.

    2006-01-01

    A rapid growth of wind power since the 1990s has led to notable market shares in some electricity markets. This growth is concentrated in a few countries with effective Research, Development and Demonstration (RD and D) programmes and with policies that support its diffusion into the market place. The speed and depth of its penetration in these electricity markets have amplified the need to address grid integration concerns, so as not to impede the further penetration of wind power. Research on technologies, tools and practices for integrating large amounts of wind power into electricity supply systems is attempting to respond to this need. In recent years, existing international collaborative research efforts have expanded their focus to include grid integration of wind power and new consortia have been formed to pool knowledge and resources. Effective results benefit a few countries that already have a significant amount of wind in their electricity supply fuel mix, as well as to the potential large markets worldwide. This paper focuses on the challenge of bringing significant amounts of intermittent generating sources into grids dominated by large central generating units. It provides a brief overview of the growth of wind power, mainly since 1990, the technical and operational issues related to integration and selected collaborative programmes underway to address grid integration concerns. (author)

  3. Research on Collaborative Technology in Distributed Virtual Reality System

    Science.gov (United States)

    Lei, ZhenJiang; Huang, JiJie; Li, Zhao; Wang, Lei; Cui, JiSheng; Tang, Zhi

    2018-01-01

    Distributed virtual reality technology applied to the joint training simulation needs the CSCW (Computer Supported Cooperative Work) terminal multicast technology to display and the HLA (high-level architecture) technology to ensure the temporal and spatial consistency of the simulation, in order to achieve collaborative display and collaborative computing. In this paper, the CSCW’s terminal multicast technology has been used to modify and expand the implementation framework of HLA. During the simulation initialization period, this paper has used the HLA statement and object management service interface to establish and manage the CSCW network topology, and used the HLA data filtering mechanism for each federal member to establish the corresponding Mesh tree. During the simulation running period, this paper has added a new thread for the RTI and the CSCW real-time multicast interactive technology into the RTI, so that the RTI can also use the window message mechanism to notify the application update the display screen. Through many applications of submerged simulation training in substation under the operation of large power grid, it is shown that this paper has achieved satisfactory training effect on the collaborative technology used in distributed virtual reality simulation.

  4. Communication and collaboration technologies.

    Science.gov (United States)

    Cheeseman, Susan E

    2012-01-01

    This is the third in a series of columns exploring health information technology (HIT) in the neonatal intensive care unit (NICU). The first column provided background information on the implementation of information technology throughout the health care delivery system, as well as the requisite informatics competencies needed for nurses to fully engage in the digital era of health care. The second column focused on information and resources to master basic computer competencies described by the TIGER initiative (Technology Informatics Guiding Education Reform) as learning about computers, computer networks, and the transfer of data.1 This column will provide additional information related to basic computer competencies, focusing on communication and collaboration technologies. Computers and the Internet have transformed the way we communicate and collaborate. Electronic communication is the ability to exchange information through the use of computer equipment and software.2 Broadly defined, any technology that facilitates linking one or more individuals together is a collaborative tool. Collaboration using technology encompasses an extensive range of applications that enable groups of individuals to work together including e-mail, instant messaging (IM ), and several web applications collectively referred to as Web 2.0 technologies. The term Web 2.0 refers to web applications where users interact and collaborate with each other in a collective exchange of ideas generating content in a virtual community. Examples of Web 2.0 technologies include social networking sites, blogs, wikis, video sharing sites, and mashups. Many organizations are developing collaborative strategies and tools for employees to connect and interact using web-based social media technologies.3.

  5. Coordination theory and collaboration technology

    CERN Document Server

    Olson, Gary M; Smith, John B

    2001-01-01

    The National Science Foundation funded the first Coordination Theory and Collaboration Technology initiative to look at systems that support collaborations in business and elsewhere. This book explores the global revolution in human interconnectedness. It will discuss the various collaborative workgroups and their use in technology. The initiative focuses on processes of coordination and cooperation among autonomous units in human systems, in computer and communication systems, and in hybrid organizations of both systems. This initiative is motivated by three scientific issues which have been

  6. Collaborative Environments. Considerations Concerning Some Collaborative Systems

    Directory of Open Access Journals (Sweden)

    Mihaela I. MUNTEAN

    2009-01-01

    Full Text Available It is obvious, that all collaborative environments (workgroups, communities of practice, collaborative enterprises are based on knowledge and between collaboration and knowledge management there is a strong interdependence. The evolution of information systems in these collaborative environments led to the sudden necessity to adopt, for maintaining the virtual activities and processes, the latest technologies/systems, which are capable to support integrated collaboration in business services. In these environments, portal-based IT platforms will integrate multi-agent collaborative systems, collaborative tools, different enterprise applications and other useful information systems.

  7. Collaborative Information Technologies

    Science.gov (United States)

    Meyer, William; Casper, Thomas

    1999-11-01

    Significant effort has been expended to provide infrastructure and to facilitate the remote collaborations within the fusion community and out. Through the Office of Fusion Energy Science Information Technology Initiative, communication technologies utilized by the fusion community are being improved. The initial thrust of the initiative has been collaborative seminars and meetings. Under the initiative 23 sites, both laboratory and university, were provided with hardware required to remotely view, or project, documents being presented. The hardware is capable of delivering documents to a web browser, or to compatible hardware, over ESNET in an access controlled manner. The ability also exists for documents to originate from virtually any of the collaborating sites. In addition, RealNetwork servers are being tested to provide audio and/or video, in a non-interactive environment with MBONE providing two-way interaction where needed. Additional effort is directed at remote distributed computing, file systems, security, and standard data storage and retrieval methods. This work supported by DoE contract No. W-7405-ENG-48

  8. State Technologies Advancement Collaborative

    Energy Technology Data Exchange (ETDEWEB)

    David S. Terry

    2012-01-30

    The U. S. Department of Energy (DOE), National Association of State Energy Officials (NASEO), and Association of State Energy Research and Technology Transfer Institutions (ASERTTI) signed an intergovernmental agreement on November 14, 2002, that allowed states and territories and the Federal Government to better collaborate on energy research, development, demonstration and deployment (RDD&D) projects. The agreement established the State Technologies Advancement Collaborative (STAC) which allowed the states and DOE to move RDD&D forward using an innovative competitive project selection and funding process. A cooperative agreement between DOE and NASEO served as the contracting instrument for this innovative federal-state partnership obligating funds from DOE's Office of Energy Efficiency and Renewable Energy and Office of Fossil Energy to plan, fund, and implement RDD&D projects that were consistent with the common priorities of the states and DOE. DOE's Golden Field Office provided Federal oversight and guidance for the STAC cooperative agreement. The STAC program was built on the foundation of prior Federal-State efforts to collaborate on and engage in joint planning for RDD&D. Although STAC builds on existing, successful programs, it is important to note that it was not intended to replace other successful joint DOE/State initiatives such as the State Energy Program or EERE Special Projects. Overall the STAC process was used to fund, through three competitive solicitations, 35 successful multi-state research, development, deployment, and demonstration projects with an overall average non-federal cost share of 43%. Twenty-two states were awarded at least one prime contract, and organizations in all 50 states and some territories were involved as subcontractors in at least one STAC project. Projects were funded in seven program areas: (1) Building Technologies, (2) Industrial Technologies, (3) Transportation Technologies, (4) Distributed Energy

  9. Using collaborative technologies in remote lab delivery systems for topics in automation

    Science.gov (United States)

    Ashby, Joe E.

    Lab exercises are a pedagogically essential component of engineering and technology education. Distance education remote labs are being developed which enable students to access lab facilities via the Internet. Collaboration, students working in teams, enhances learning activity through the development of communication skills, sharing observations and problem solving. Web meeting communication tools are currently used in remote labs. The problem identified for investigation was that no standards of practice or paradigms exist to guide remote lab designers in the selection of collaboration tools that best support learning achievement. The goal of this work was to add to the body of knowledge involving the selection and use of remote lab collaboration tools. Experimental research was conducted where the participants were randomly assigned to three communication treatments and learning achievement was measured via assessments at the completion of each of six remote lab based lessons. Quantitative instruments used for assessing learning achievement were implemented, along with a survey to correlate user preference with collaboration treatments. A total of 53 undergraduate technology students worked in two-person teams, where each team was assigned one of the treatments, namely (a) text messaging chat, (b) voice chat, or (c) webcam video with voice chat. Each had little experience with the subject matter involving automation, but possessed the necessary technical background. Analysis of the assessment score data included mean and standard deviation, confirmation of the homogeneity of variance, a one-way ANOVA test and post hoc comparisons. The quantitative and qualitative data indicated that text messaging chat negatively impacted learning achievement and that text messaging chat was not preferred. The data also suggested that the subjects were equally divided on preference to voice chat verses webcam video with voice chat. To the end of designing collaborative

  10. Global Collaboration Enhances Technology Literacy

    Science.gov (United States)

    Cook, Linda A.; Bell, Meredith L.; Nugent, Jill; Smith, Walter S.

    2016-01-01

    Today's learners routinely use technology outside of school to communicate, collaborate, and gather information about the world around them. Classroom learning experiences are relevant when they include communication technologies such as social networking, blogging, and video conferencing, and information technologies such as databases, browsers,…

  11. Remediation Technology Collaboration Development

    Science.gov (United States)

    Mahoney, John; Olsen, Wade

    2010-01-01

    This slide presentation reviews programs at NASA aimed at development at Remediation Technology development for removal of environmental pollutants from NASA sites. This is challenging because there are many sites with different environments, and various jurisdictions and regulations. There are also multiple contaminants. There must be different approaches based on location and type of contamination. There are other challenges: such as costs, increased need for resources and the amount of resources available, and a regulatory environment that is increasing.

  12. Collaborative Car Pooling System

    OpenAIRE

    João Ferreira; Paulo Trigo; Porfírio Filipe

    2009-01-01

    This paper describes the architecture for a collaborative Car Pooling System based on a credits mechanism to motivate the cooperation among users. Users can spend the accumulated credits on parking facilities. For this, we propose a business model to support the collaboration between a car pooling system and parking facilities. The Portuguese Lisbon-s Metropolitan area is used as application scenario.

  13. Study on collaborative optimization control of ventilation and radon reduction system based on multi-agent technology

    International Nuclear Information System (INIS)

    Dai Jianyong; Meng Lingcong; Zou Shuliang

    2015-01-01

    According to the radioactive safety features such as radon and its progeny, combined with the theory of ventilation system, structure of multi-agent system for ventilation and radon reduction system is constructed with the application of multi agent technology. The function attribute of the key agent and the connection between the nodes in the multi-agent system are analyzed to establish the distributed autonomous logic structure and negotiation mechanism of multi agent system of ventilation and radon reduction system, and thus to implement the coordination optimization control of the multi-agent system. The example analysis shows that the system structure of the multi-agent system of ventilation and reducing radon system and its collaborative mechanism can improve and optimize the radioactive pollutants control, which provides a theoretical basis and important application prospect. (authors)

  14. Evaluation of the Technology Acceptance of a Collaborative Documentation System for Addiction Therapists and Clients.

    Science.gov (United States)

    Perlich, Anja; Meinel, Christoph; Zeis, Daniel

    2018-01-01

    Addiction treatment outcomes are strongly determined by relational factors. We present the interactive documentation system Tele-Board MED (TBM) developed as an adjunct to therapy sessions aimed at enhancing the therapeutic alliance and patient empowerment. The objective of this work is to find factors that predict the acceptance of TBM in face-to-face addiction treatment sessions. We combined the methodologies of survey and focus group and based the data collection and analysis on the Unified Theory of Acceptance and Use of Technology. The studies, which involved therapists (n=13) and clients (n=33), were conducted in an addiction counselling center in Germany. Therapists see a flexible, context-dependent usage as a basic condition for TBM acceptance and its greatest benefit in providing a discussion framework and quick access to worksheets-in both individual and group sessions. Clients are inclined to use the system with the expectation of improved communication and better recall of the discussed topics based on a personal copy of the session notes.

  15. Progress of the research and development on the geological disposal technology of HLW with aid of the industry/university collaboration system and fixed term researcher system

    International Nuclear Information System (INIS)

    Yamada, Fumitaka; Sonobe, Hitoshi; Igarashi, Hiroshi

    2008-02-01

    In Japan Atomic Energy Agency (JAEA), various systems associated with the collaboration with industries and universities on the Nuclear Fuel Cycle and the Postdoctoral Fellow system, etc. are enacted. These systems have been operated considering the needs of JAEA's program, industry and academia, resultantly contributed, for example, to basic research and the project development. The activities under these collaboration systems contain personal exchanges, the publication of the accomplishments and utilization of those, in research and development concerning geological disposal technology of high-level radioactive waste (HLW). These activities have progressed in Power Reactor and Nuclear Fuel Development Corporation (PNC) and Japan Nuclear Cycle Development Institute (JNC), which are the successive predecessors of JAEA, through JAEA. The accomplishments from these systems have been not only published as papers in journals and individual technical reports but also integrated into the project reports, accordingly contributed to the advancement of the national program on the geological disposal of HLW. In this report, the progress of the research and development under these systems was investigated from the beginning of the operation of the systems. The contribution to the research and development on geological disposal technology of HLW was also studied. On the basis of these studies, the future utilization of the systems of the collaboration was also discussed from the view point of the management of research and development program. A CD-ROM is attached as an appendix. (J.P.N.)

  16. The use of technology in international collaboration

    DEFF Research Database (Denmark)

    Livonen, Mirja; Sonnenwald, Diane H.

    2000-01-01

    International collaboration is emerging as an essential function for organizations, playing an important role in organizational strategy, performance and knowledge management. Two case studies of international collaboration are discussed in this paper. Participants' perceptions and use...... of technology to collaborate are examined from the perspective of sense of presence, participation, task type, productivity and ease of use. The data suggest that technology compatibility with cultural and work style preferences and technology infrastructure is more important than media richness, in contrast...

  17. SHARING RESOURCES THROUGH COLLABORATION USING TECHNOLOGY

    Science.gov (United States)

    In response to changing social and economic conditions, instant communication, emerging technology, and decreasing resources for libraries, there is a need for librarians to use collaborative methods, strategies, and technologies to solve common problems or produce common produ...

  18. Establishment of Collaboration System for SFR Technology Development between Korea and France

    International Nuclear Information System (INIS)

    Yoo, Jae Woon; Kim, Yeong Il; Choi, Jong Hyeun; Seong, Seung Hwan; Eoh, Jae Hyuk; Jeong, Hae Yong; Hahn, Do Hee; Lee, Yong Bum; Chang, Jin Wook; Lee, Dong Uk

    2010-03-01

    1) Review of the technical status and plane associated with STCs on the SFR R and D · The objective of the study was accomplished by constructing an human network and investigating the status on the following 5 STCs - Analysis of BFS -73 -1 and 75-1 critical experiments using ERANOS. - SFR : Elector-magnetic pumps or mechanical pumps; criteria for selection, description and modeling - Phenix end of life tests - SC-CO2 Brayton cycle : Investigation of sodium-carbon dioxide interactions; potential consequences on reactor operation - Evaluation of lead-bismuth eutectic (LBE) coolant for SFR intermediate loop 2) Holding KAERI-CEA SFR technical meeting on STCs - Final investigation at SFR technical meeting held at CEA Cadarache from Jan. 5 to Jan. 7 in 2010. - Agreement on further action plan for completing the STC - Deduction of future collaboration topics and agreed to submit into the next JCCNE - Agreed to hold next SFR technical meeting in Korea on around October 2010

  19. A Qualitative Descriptive Analysis of Collaboration Technology in the Navy

    Directory of Open Access Journals (Sweden)

    Ryan Wark

    2015-10-01

    Full Text Available Collaboration technologies enable people to communicate and use information to make organizational decisions. The United States Navy refers to this concept as information dominance. Various collaboration technologies are used by the Navy to achieve this mission. This qualitative descriptive study objectively examined how a matrix oriented Navy activity perceived an implemented collaboration technology. These insights were used to determine whether a specific collaboration technology achieved a mission of information dominance. The study used six collaboration themes as a foundation to include: (a Cultural intelligence, (b Communication, (c Capability, (d Coordination, (e Cooperation, and (f Convergence. It was concluded that collaboration technology was mostly perceived well and helped to achieve some levels of information dominance. Collaboration technology improvement areas included bringing greater awareness to the collaboration technology, revamping the look and feel of the user interface, centrally paying for user and storage fees, incorporating more process management tools, strategically considering a Continuity of Operations, and incorporating additional industry best practices for data structures. Emerging themes of collaboration were collected to examine common patterns identified in the collected data. Emerging themes included acceptance, awareness, search, scope, content, value, tools, system performance, implementation, training, support, usage, structure, complexity, approach, governance/configuration management/policy, and resourcing.

  20. Collaboration systems for classroom instruction

    Science.gov (United States)

    Chen, C. Y. Roger; Meliksetian, Dikran S.; Chang, Martin C.

    1996-01-01

    In this paper we discuss how classroom instruction can benefit from state-of-the-art technologies in networks, worldwide web access through Internet, multimedia, databases, and computing. Functional requirements for establishing such a high-tech classroom are identified, followed by descriptions of our current experimental implementations. The focus of the paper is on the capabilities of distributed collaboration, which supports both synchronous multimedia information sharing as well as a shared work environment for distributed teamwork and group decision making. Our ultimate goal is to achieve the concept of 'living world in a classroom' such that live and dynamic up-to-date information and material from all over the world can be integrated into classroom instruction on a real-time basis. We describe how we incorporate application developments in a geography study tool, worldwide web information retrievals, databases, and programming environments into the collaborative system.

  1. International energy technology collaboration: benefits and achievements

    International Nuclear Information System (INIS)

    1996-01-01

    The IEA Energy Technology Collaboration Programme facilitates international collaboration on energy technology research, development and deployment. More than 30 countries are involved in Europe, America, Asia, Australasia and Africa. The aim is to accelerate the development and deployment of new energy technologies to meet energy security, environmental and economic development goals. Costs and resources are shared among participating governments, utilities, corporations and universities. By co-operating, they avoid unproductive duplication and maximize the benefits from research budgets. The IEA Programme results every year in hundreds of publications which disseminate information about the latest energy technology developments and their commercial utilisation. The IEA Energy Technology Collaboration Programme operates through a series of agreements among governments. This report details the activities and achievements of all 41 agreements, covering energy technology information centres and Research and Development projects in fossil fuels, renewable energy efficient end-use, and nuclear fusion technologies. (authors). 58 refs., 9 tabs

  2. Assessment of University- Industry Collaboration and Technology ...

    African Journals Online (AJOL)

    Despite the cultural differences between university and industry, the mutual benefits from collaboration between university and industry have long been recognized in the advanced countries. Recently, the issue of technology transfer and collaboration between universities and industries has been receiving attention in the ...

  3. Citizenship, Collaborative Technologies and Regulation | Page 8 ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    The recent rise of a wide range of collaborative information technologies ... and sanitation utilities using web 2.0 applications and/or cellphones (mobile phones). ... Organization for Women in Science for the Developing World (OWSD), IDRC ...

  4. CROSS-DISCIPLINARY PHYSICS AND RELATED AREAS OF SCIENCE AND TECHNOLOGY: Diffusion-Based Recommendation in Collaborative Tagging Systems

    Science.gov (United States)

    Shang, Ming-Sheng; Zhang, Zi-Ke

    2009-11-01

    Recently, collaborative tagging systems have attracted more and more attention and have been widely applied in web systems. Tags provide highly abstracted information about personal preferences and item content, and therefore have the potential to help in improving better personalized recommendations. We propose a diffusion-based recommendation algorithm considering the personal vocabulary and evaluate it in a real-world dataset: Del.icio.us. Experimental results demonstrate that the usage of tag information can significantly improve the accuracy of personalized recommendations.

  5. Green Component Procurement Collaboration for Improving Supply Chain Management in the High Technology Industries: A Case Study from the Systems Perspective

    Directory of Open Access Journals (Sweden)

    Min-Ren Yan

    2016-01-01

    Full Text Available The impacts of high technology industries have been growing increasingly to technological innovations and global economic developments, while the concerns in sustainability are calling for facilitating green materials and cleaner production in the industrial value chains. Today’s manufacturing companies are not striving for individual capacities but for the effective working with green supply chains. However, in addition to environmental and social objectives, cost and economic feasibility has become one of the most critical success factors for improving supply chain management with green component procurement collaboration, especially for the electronics OEM (original equipment manufacturing companies whose procurement costs often make up a very high proportion of final product prices. This paper presents a case study from the systems perspective by using System Dynamics simulation analysis and statistical validations with empirical data. Empirical data were collected from Taiwanese manufacturing chains—among the world’s largest manufacturing clusters of high technology components and products—and their global green suppliers to examine the benefits of green component procurement collaborations in terms of shared costs and improved shipping time performance. Two different supply chain collaboration models, from multi-layer ceramic capacitor (MLCC and universal serial bus 3.0 (USB 3.0 cable procurements, were benchmarked and statistically validated. The results suggest that the practices of collaborative planning for procurement quantity and accurate fulfillment by suppliers are significantly related to cost effectiveness and shipping time efficiency. Although the price negotiation of upstream raw materials for the collaborative suppliers has no statistically significant benefit to the shipping time efficiency, the shared cost reduction of component procurement is significantly positive for supply chain collaboration among green

  6. Expanding Technological Frames Towards Mediated Collaboration

    DEFF Research Database (Denmark)

    Bjørn, Pernille; Scupola, Ada; Fitzgerald, Brian

    2006-01-01

    This paper provides an in-depth analysis of technological and social factors leading to the successful adoption of groupware in a virtual team in educational setting. Drawing on a theoretical framework based on the concept of technological frames, we conducted an action research study to analyze...... the chronological sequence of events leading to groupware adoption. We argue that groupware adoption can be conceptualized as a three-step process of expanding and aligning individual technological frames towards groupware: The first step comprises activities facilitating participants in articulation and evaluation...... collaborative practice and use of technology, and that this activity cannot take place at the outset....

  7. Identifying Interdisciplinary Research Collaboration in Instructional Technology

    Science.gov (United States)

    Cho, Yonjoo

    2017-01-01

    Interdisciplinarity is defined as communication and collaboration across academic disciplines. The instructional technology (IT) field has claimed to have an interdisciplinary nature influenced by neighboring fields such as psychology, communication, and management. However, it has been difficult to find outstanding evidence of the field's…

  8. Validation of Metrics for Collaborative Systems

    Directory of Open Access Journals (Sweden)

    Ion IVAN

    2008-01-01

    Full Text Available This paper describe the new concepts of collaborative systems metrics validation. The paper define the quality characteristics of collaborative systems. There are proposed a metric to estimate the quality level of collaborative systems. There are performed measurements of collaborative systems quality using a specially designed software.

  9. Validation of Metrics for Collaborative Systems

    OpenAIRE

    Ion IVAN; Cristian CIUREA

    2008-01-01

    This paper describe the new concepts of collaborative systems metrics validation. The paper define the quality characteristics of collaborative systems. There are proposed a metric to estimate the quality level of collaborative systems. There are performed measurements of collaborative systems quality using a specially designed software.

  10. Supply Chain Collaboration Roles of Interorganizational Systems, Trust, and Collaborative Culture

    CERN Document Server

    Cao, Mei

    2013-01-01

    To survive and thrive in the competition, firms have strived to achieve greater supply chain collaboration to leverage the resources and knowledge of suppliers and customers.  Internet based technologies, particularly interorganizational systems, further extend the firms’ opportunities to strengthen their supply chain partnerships and share real-time information to optimize their operations.  Supply Chain Collaboration: Roles of Interorganizational Systems, Trust, and Collaborative Culture explores the nature and characteristics, antecedents, and consequences of supply chain collaboration from multiple theoretical perspectives.  Supply Chain Collaboration: Roles of Interorganizational Systems, Trust, and Collaborative Culture conceptualizes supply chain collaboration as seven interconnecting elements including information sharing, incentive alignment, goal congruence, decision synchronization, resource sharing, as well as communication and joint knowledge creation. These seven components define the occur...

  11. A Metrics Approach for Collaborative Systems

    Directory of Open Access Journals (Sweden)

    Cristian CIUREA

    2009-01-01

    Full Text Available This article presents different types of collaborative systems, their structure and classification. This paper defines the concept of virtual campus as a collaborative system. It builds architecture for virtual campus oriented on collaborative training processes. It analyses the quality characteristics of collaborative systems and propose techniques for metrics construction and validation in order to evaluate them. The article analyzes different ways to increase the efficiency and the performance level in collaborative banking systems.

  12. Adaptive Collaboration Support Systems : Designing Collaboration Support for Dynamic Environments

    NARCIS (Netherlands)

    Janeiro, J.; Knoll, S.W.; Lukosch, S.G.; Kolfschoten, G.L.

    2012-01-01

    Today, engineering systems offer a variety of local and webbased applications to support collaboration by assisting groups in structuring activities, generating and sharing data, and improving group communication. To ensure the quality of collaboration, engineering system design needs to analyze and

  13. An Evaluation Framework for Selecting Collaboration Systems for Student Teamwork

    Science.gov (United States)

    Shen, Yide; Li, Lei; Zheng, Guangzhi; Guo, Rong

    2017-01-01

    Collaboration technologies play an increasingly important role in student teamwork in universities. With the proliferation of collaboration systems on the market and the wide range of features they offer, choosing an appropriate system can be an overwhelming task for college students. In this paper, the authors present an empirical study that…

  14. Distributed Collaborative Learning Communities Enabled by Information Communication Technology

    NARCIS (Netherlands)

    H.L. Alvarez (Heidi Lee)

    2006-01-01

    textabstractHow and why can Information Communication Technology (ICT) contribute to enhancing learning in distributed Collaborative Learning Communities (CLCs)? Drawing from relevant theories concerned with phenomenon of ICT enabled distributed collaborative learning, this book identifies gaps in

  15. A Net Centric Collaborative Support System Concept: A Preliminary Investigation

    National Research Council Canada - National Science Library

    Eggleston, Robert

    2004-01-01

    ... layer added to the information technology (IT) infrastructure. Design requirements for this layer of the collaborative interface are derived from principles of Cognitive Systems Engineering and characteristics of human expertise...

  16. Appropriation of technology for collaboration : From mastery to utilisation

    NARCIS (Netherlands)

    Overdijk, M.

    2009-01-01

    Technologies for collaboration in education are designed to alter the interaction of learners with other learners in order to support or facilitate collaboration. The effect of these technologies is often explained from their structuring influence on the learners’ behaviour: the technology provides

  17. Technologies for Collaborative Business Processes and Management of Enterprise Information Systems : Proceedings of the 1st International Joint Workshop on Technologies for Collaborative Processes and Management of Enterprise Information Systems, TCoB & MEIS 2007

    NARCIS (Netherlands)

    Sadiq, Shazia; Reichert, Manfred; Schultz, Karsten; Trienekens, Jos; Møller, Charles; Kusters, Rob J.

    Enterprise Information Systems (EIS) like ERP-, CRM- and SCM-systems are pervasive in today’s organizations. EIS implementation projects ask for major financial investments of organizations. They impact many processes and employees of an organization and require significant organizational change.

  18. Barriers and Facilitators of Collaborative Management in Technological Innovation Projects

    Directory of Open Access Journals (Sweden)

    Sonia Regina Hierro Parolin

    2013-05-01

    Full Text Available Discussions about innovation tend to a more systemic and cooperative approach in which those networks focused on scientific and technological development are considered. This article aims to identify the barriers and facilitators in the collaborative management process of technological innovation projects and a study has been carried out by the cooperation action for innovation with 17 industries in Brazil. The primary evidence refers to the crucial role of project managers when leading the structural demands, and clarity on the relevance of the communication of strategic guidelines among the organizations involved for the achievement of the results in the industries.

  19. Does the Medium Matter in Collaboration? Using Visually Supported Collaboration Technology in an Interior Design Studio

    Science.gov (United States)

    Cho, Ji Young; Cho, Moon-Heum; Kozinets, Nadya

    2016-01-01

    With the recognition of the importance of collaboration in a design studio and the advancement of technology, increasing numbers of design students collaborate with others in a technology-mediated learning environment (TMLE); however, not all students have positive experiences in TMLEs. One possible reason for unsatisfactory collaboration…

  20. Technologies for Collaborative Business Process Management

    NARCIS (Netherlands)

    Sadiq, Shazia; Reichert, M.U.; Schulz, Karsten

    Business process management (BPM) has become an extensive area of research with several specialized aspects. BPM is viewed from highly diverse angles ranging from a management strategy to a software system. It is widely acknowledged that process enforcement technologies hold the potential to provide

  1. INL - NNL an International Technology Collaboration Case Study - Advanced Fogging Technologies for Decommissioning - 13463

    International Nuclear Information System (INIS)

    Banford, Anthony; Edwards, Jeremy; Demmer, Rick; Rankin, Richard; Hastings, Jeremy

    2013-01-01

    International collaboration and partnerships have become a reality as markets continue to globalize. This is the case in nuclear sector where over recent years partnerships commonly form to bid for capital projects internationally in the increasingly contractorized world and international consortia regularly bid and lead Management and Operations (M and O) / Parent Body Organization (PBO) site management contracts. International collaboration can also benefit research and technology development. The Idaho National Laboratory (INL) and the UK National Nuclear Laboratory (NNL) are internationally recognized organizations delivering leading science and technology development programmes both nationally and internationally. The Laboratories are actively collaborating in several areas with benefits to both the laboratories and their customers. Recent collaborations have focused on fuel cycle separations, systems engineering supporting waste management and decommissioning, the use of misting for decontamination and in-situ waste characterisation. This paper focuses on a case study illustrating how integration of two technologies developed on different sides of the Atlantic are being integrated through international collaboration to address real decommissioning challenges using fogging technology. (authors)

  2. INL - NNL an International Technology Collaboration Case Study - Advanced Fogging Technologies for Decommissioning - 13463

    Energy Technology Data Exchange (ETDEWEB)

    Banford, Anthony; Edwards, Jeremy [National Nuclear Laboratory, 5th Floor Chadwick House, Birchwood Park, Warrington WA3 6AE(United Kingdom); Demmer, Rick; Rankin, Richard [Idaho National Laboratory, Idaho Falls, ID 83401(United States); Hastings, Jeremy [National Nuclear Laboratory, Central Laboratory Sellafield, Seascale, Cumbria CA20 1PG (United Kingdom)

    2013-07-01

    International collaboration and partnerships have become a reality as markets continue to globalize. This is the case in nuclear sector where over recent years partnerships commonly form to bid for capital projects internationally in the increasingly contractorized world and international consortia regularly bid and lead Management and Operations (M and O) / Parent Body Organization (PBO) site management contracts. International collaboration can also benefit research and technology development. The Idaho National Laboratory (INL) and the UK National Nuclear Laboratory (NNL) are internationally recognized organizations delivering leading science and technology development programmes both nationally and internationally. The Laboratories are actively collaborating in several areas with benefits to both the laboratories and their customers. Recent collaborations have focused on fuel cycle separations, systems engineering supporting waste management and decommissioning, the use of misting for decontamination and in-situ waste characterisation. This paper focuses on a case study illustrating how integration of two technologies developed on different sides of the Atlantic are being integrated through international collaboration to address real decommissioning challenges using fogging technology. (authors)

  3. Stereoscopic medical imaging collaboration system

    Science.gov (United States)

    Okuyama, Fumio; Hirano, Takenori; Nakabayasi, Yuusuke; Minoura, Hirohito; Tsuruoka, Shinji

    2007-02-01

    The computerization of the clinical record and the realization of the multimedia have brought improvement of the medical service in medical facilities. It is very important for the patients to obtain comprehensible informed consent. Therefore, the doctor should plainly explain the purpose and the content of the diagnoses and treatments for the patient. We propose and design a Telemedicine Imaging Collaboration System which presents a three dimensional medical image as X-ray CT, MRI with stereoscopic image by using virtual common information space and operating the image from a remote location. This system is composed of two personal computers, two 15 inches stereoscopic parallax barrier type LCD display (LL-151D, Sharp), one 1Gbps router and 1000base LAN cables. The software is composed of a DICOM format data transfer program, an operation program of the images, the communication program between two personal computers and a real time rendering program. Two identical images of 512×768 pixcels are displayed on two stereoscopic LCD display, and both images show an expansion, reduction by mouse operation. This system can offer a comprehensible three-dimensional image of the diseased part. Therefore, the doctor and the patient can easily understand it, depending on their needs.

  4. Manipulation Robustness of Collaborative Filtering Systems

    OpenAIRE

    Benjamin Van Roy; Xiang Yan

    2009-01-01

    A collaborative filtering system recommends to users products that similar users like. Collaborative filtering systems influence purchase decisions, and hence have become targets of manipulation by unscrupulous vendors. We provide theoretical and empirical results demonstrating that while common nearest neighbor algorithms, which are widely used in commercial systems, can be highly susceptible to manipulation, two classes of collaborative filtering algorithms which we refer to as linear and a...

  5. The Impact of Experience and Technology Change on Task-Technology Fit of a Collaborative Technology

    Science.gov (United States)

    Iversen, Jakob H.; Eierman, Michael A.

    2018-01-01

    This study continues a long running effort to examine collaborative writing and editing tools and the factors that impact Task-Technology Fit and Technology Acceptance. Previous studies found that MS Word/email performed better than technologies such as Twiki, Google Docs, and Office Live. The current study seeks to examine specifically the impact…

  6. Towards Modern Collaborative Knowledge Sharing Systems

    CERN Document Server

    Świrski, Konrad

    2012-01-01

    The development of new technologies still accelerates. As a result the requirement of easy access to high quality information is essential in modern scientific society. We believe that new cloud-based online system will replace the old system of books and magazines in the future. This is mainly because contemporary system of journal and conference publications appears to be outdated, especially in such domains as computer science, because process of publishing of an article takes too much time. In this book a new approach of sharing knowledge is proposed. The main idea behind this new approach is to take advantage of collaboration techniques used in industry to share the knowledge and build teams which work on the same subject at different locations. This will allow to accelerate the exchange of information between scientists and allow to build global teams of researchers who deal with the same scientific subjects. Furthermore, an easy access to structured knowledge will facilitate cross domain cooperation. T...

  7. Collaborating to optimize nursing students' agency information technology use.

    Science.gov (United States)

    Fetter, Marilyn S

    2009-01-01

    As the learning laboratory for gaining actual patient care experience, clinical agencies play an essential role in nursing education. With an information technology revolution transforming healthcare, nursing programs are eager for their students to learn the latest informatics systems and technologies. However, many healthcare institutions are struggling to meet their own information technology needs and report limited resources and other as barriers to nursing student training. In addition, nursing students' information technology access and use raise security and privacy concerns. With the goal of a fully electronic health record by 2014, it is imperative that agencies and educational programs collaborate. They need to establish educationally sound, cost-effective, and secure policies and procedures for managing students' use of information technology systems. Strategies for evaluating options, selecting training methods, and ensuring data security are shared, along with strategies that may reap clinical, economic, and educational benefits. Students' information technology use raises numerous issues that the nursing profession must address to participate in healthcare's transformation into the digital age.

  8. Energy technologies at the cutting edge: international energy technology collaboration IEA Implementing Agreements

    Energy Technology Data Exchange (ETDEWEB)

    Pottinger, C. (ed.)

    2007-05-15

    Ensuring energy security and addressing climate change issues in a cost-effective way are the main challenges of energy policies and in the longer term will be solved only through technology cooperation. To encourage collaborative efforts to meet these energy challenges, the IEA created a legal contract - Implementing Agreement - and a system of standard rules and regulations. This allows interested member and non-member governments or other organisations to pool resources and to foster the research, development and deployment of particular technologies. For more than 30 years, this international technology collaboration has been a fundamental building block in facilitating progress of new or improved energy technologies. There are now 41 Implementing Agreements. This is the third in the series of publications highlighting the recent results and achievements of the IEA Implementing Agreements. This document is arranged in the following sections: Cross-cutting activities (sub-sectioned: Climate technology initiative; Energy Technology Data Eexchange; and Energy technology systems analysis programme); End-use technologies (sub-sectioned: Buildings; Electricity; Industry; and Transport; Fossil fuels (sub-sectioned: Clean Coal Centre; Enhanced oil recovery Fluidized bed conversion; Greenhouse Gas R & D; Multiphase flow sciences); Fusion power; Renewable energies and hydrogen; and For more information (including detail on the IEA energy technology network; IEA Secretariat Implementing Agreement support; and IEA framework. Addresses are given for the Implementing Agreements. The publication is based on core input from the Implementing Agreement Executive Committee.

  9. Collaboration

    Science.gov (United States)

    King, Michelle L.

    2010-01-01

    This article explores collaboration between library media educators and regular classroom teachers. The article focuses on the context of the issue, positions on the issue, the impact of collaboration, and how to implement effective collaboration into the school system. Various books and professional journals are used to support conclusions…

  10. Technological learning through international collaboration: Lessons from the field

    Science.gov (United States)

    Wood, Danielle; Weigel, Annalisa

    2013-02-01

    Countries on every continent are making new or renewed commitments to domestic satellite programs. These programs have the potential to address national needs by enhancing access to information, improving infrastructure and providing inspiration to the public. How do countries without local expertise in space technology begin a new satellite program? What is the role of international collaboration in supporting the efforts of a new space fairing country? This paper explores such questions by highlighting outputs from intensive field work in Africa and Asia. Specifically, the study explores case studies of early space activity in these countries to search for lessons about the management of a young space program. The observations from field work are compared to ideas from scholarly literature on technological learning. The findings are organized using principles from systems architecture. The paper presents a model that captures many of the influences and strategic decision areas for a collaborative satellite development project. The paper also highlights the growth of capability among African countries in the area of satellite technology.

  11. Seven Affordances of Computer-Supported Collaborative Learning: How to Support Collaborative Learning? How Can Technologies Help?

    Science.gov (United States)

    Jeong, Heisawn; Hmelo-Silver, Cindy E.

    2016-01-01

    This article proposes 7 core affordances of technology for collaborative learning based on theories of collaborative learning and CSCL (Computer-Supported Collaborative Learning) practices. Technology affords learner opportunities to (1) engage in a joint task, (2) communicate, (3) share resources, (4) engage in productive collaborative learning…

  12. Collaborating with EPA through the Federal Technology Transfer Act

    Science.gov (United States)

    Under the Federal Technology Transfer Act (FTTA), EPA can collaborate with external parties on research projects, and share research materials. Learn more about the types of partnerships the EPA offers.

  13. NASA Remediation Technology Collaboration Development Task, Overview and Project Summaries

    Science.gov (United States)

    Romeo, James G.

    2014-01-01

    An overview presentation of NASA's Remediation Technology Collaboration Development Task including the following project summaries: in situ groundwater monitor, in situ chemical oxidation, in situ bioremediation, horizontal multi-port well, and high resolution site characterization.

  14. International Collaboration Patterns and Effecting Factors of Emerging Technologies.

    Directory of Open Access Journals (Sweden)

    Xu Bai

    Full Text Available With the globalization of the world economy, international innovation collaboration has taken place all over the world. This study selects three emerging technologies (3D printing, big data and carbon nanotubes and graphene technology among 20 countries as the research objects, using three patent-based indicators and network relationship analysis to reflect international collaboration patterns. Then we integrate empirical analyses to show effecting factors of international collaboration degrees by using panel data. The results indicate that while 3D printing technology is associated with a "balanced collaboration" mode, big data technology is more accurately described by a radial pattern, centered on the United States, and carbon nanotubes and graphene technology exhibits "small-world" characteristics in this respect. It also shows that the factors GDP per capita (GPC, R&D expenditure (RDE and the export of global trade value (ETV negatively affect the level of international collaboration. It could be useful for China and other developing countries to make international scientific and technological collaboration strategies and policies in the future.

  15. PMEL contributions to the collaboration: SCALING THE EARTH SYSTEM GRID TO PETASCALE DATA for the DOE SciDACs Earth System Grid Center for Enabling Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Hankin, Steve

    2012-06-01

    Drawing to a close after five years of funding from DOE's ASCR and BER program offices, the SciDAC-2 project called the Earth System Grid (ESG) Center for Enabling Technologies has successfully established a new capability for serving data from distributed centers. The system enables users to access, analyze, and visualize data using a globally federated collection of networks, computers and software. The ESG software now known as the Earth System Grid Federation (ESGF) has attracted a broad developer base and has been widely adopted so that it is now being utilized in serving the most comprehensive multi-model climate data sets in the world. The system is used to support international climate model intercomparison activities as well as high profile U.S. DOE, NOAA, NASA, and NSF projects. It currently provides more than 25,000 users access to more than half a petabyte of climate data (from models and from observations) and has enabled over a 1,000 scientific publications.

  16. Infrastructure Support for Collaborative Pervasive Computing Systems

    DEFF Research Database (Denmark)

    Vestergaard Mogensen, Martin

    Collaborative Pervasive Computing Systems (CPCS) are currently being deployed to support areas such as clinical work, emergency situations, education, ad-hoc meetings, and other areas involving information sharing and collaboration.These systems allow the users to work together synchronously......, but from different places, by sharing information and coordinating activities. Several researchers have shown the value of such distributed collaborative systems. However, building these systems is by no means a trivial task and introduces a lot of yet unanswered questions. The aforementioned areas......, are all characterized by unstable, volatile environments, either due to the underlying components changing or the nomadic work habits of users. A major challenge, for the creators of collaborative pervasive computing systems, is the construction of infrastructures supporting the system. The complexity...

  17. Formulating transgenerational technology critique as conflictual collaboration

    DEFF Research Database (Denmark)

    Chimirri, Niklas Alexander

    2015-01-01

    In the fields of technology design studies and human-computer interaction (HCI), participatory technology design involving children has been on the rise. Particularly studies applying and developing the cooperative inquiry methodology or inspired by it are of growing interest to media technology...... designers. While the underlying impetus of actively involving the intended users in the design process and thereby taking the children as seriously as adult users is laudable, the overarching framing and directionality of the technology design process is rendered unquestionable for the children....... The presentation illustrates that the pristine intention of engaging in intergenerational technology design is potentially helpful for collectively formulating a productive and sustainable technology critique. On the downside the applied methodologies lack viable concepts for meaningfully analyzing its...

  18. COLLABORATION SYSTEM IN VIRTUAL ORGANIZATION

    Directory of Open Access Journals (Sweden)

    ADINA CRETAN

    2011-04-01

    Full Text Available The purpose of this work is to provide a collaboration support for small and medium enterprises which cannot or do not want to fulfill a major contract alone. In that case, in order to better meet a higher external demand, the managers are willing to subcontract parts of their contracts even to competitors. This approach is illustrated by a business-to-business interaction, being proposed a sample scenario where partners are autonomous gas stations grouped in a virtual organization.

  19. International Collaboration Patterns and Effecting Factors of Emerging Technologies

    Science.gov (United States)

    Bai, Xu; Liu, Yun

    2016-01-01

    With the globalization of the world economy, international innovation collaboration has taken place all over the world. This study selects three emerging technologies (3D printing, big data and carbon nanotubes and graphene technology) among 20 countries as the research objects, using three patent-based indicators and network relationship analysis to reflect international collaboration patterns. Then we integrate empirical analyses to show effecting factors of international collaboration degrees by using panel data. The results indicate that while 3D printing technology is associated with a “balanced collaboration” mode, big data technology is more accurately described by a radial pattern, centered on the United States, and carbon nanotubes and graphene technology exhibits “small-world” characteristics in this respect. It also shows that the factors GDP per capita (GPC), R&D expenditure (RDE) and the export of global trade value (ETV) negatively affect the level of international collaboration. It could be useful for China and other developing countries to make international scientific and technological collaboration strategies and policies in the future. PMID:27911926

  20. Electronic construction collaboration system : phase III.

    Science.gov (United States)

    2011-12-01

    This phase of the electronic collaboration project involved two major efforts: 1) implementation of AEC Sync (formerly known as Attolist), a web-based project management system (WPMS), on the Broadway Viaduct Bridge Project and the Iowa Falls Arch Br...

  1. Collaborative Educational Systems in the Virtual Environment

    OpenAIRE

    Cristian CIUREA; Paul POCATILU

    2012-01-01

    The work leads to an original approach to the construction of collaborative systems metrics. The approach is based both on research already conducted by the author, on the experimental results obtained, and the foundation taken from the specific literature. The collaborative systems in knowledge-based economy are formalized and their characteristics are identified. The virtual campus structure is described and a comparison with the classical university is achieved. The architecture of virtual...

  2. From Autonomous Systems to Sociotechnical Systems: Designing Effective Collaborations

    Directory of Open Access Journals (Sweden)

    Kyle J. Behymer

    Full Text Available Effectiveness in sociotechnical systems often depends on coordination among multiple agents (including both humans and autonomous technologies. This means that autonomous technologies must be designed to function as collaborative systems, or team players. In many complex work domains, success is beyond the capabilities of humans unaided by technologies. However, at the same time, human capabilities are often critical to ultimate success, as all automated control systems will eventually face problems their designers did not anticipate. Unfortunately, there is often an either/or attitude with respect to humans and technology that tends to focus on optimizing the separate human and autonomous components, with the design of interfaces and team processes as an afterthought. The current paper discusses the limitations of this approach and proposes an alternative where the goal of design is a seamless integration of human and technological capabilities into a well-functioning sociotechnical system. Drawing lessons from both the academic (SRK Framework and commercial (IBM’s Watson, video games worlds, suggestions for enriching the coupling between the human and automated systems by considering both technical and social aspects are discussed.

  3. Performance Evaluation of Two Different Usability Evaluation Methods in the Context of Collaborative Writing Systems

    OpenAIRE

    Bakhtyar, Shoaib; Afridi, Qaisar Zaman

    2010-01-01

    In today’s world of rapid technological development one cannot deny the importance of collaborative writing systems. Besides many advantages of a collaborative writing system the major one is to allow its end users to work in collaboration with each other without having to physically meet. In the past various researches has been carried out for the usability evaluation of collaborative writing systems using the think aloud protocol method however there is no study conducted on the comparison ...

  4. Collaborative Systems – Finite State Machines

    Directory of Open Access Journals (Sweden)

    Ion IVAN

    2011-01-01

    Full Text Available In this paper the finite state machines are defined and formalized. There are presented the collaborative banking systems and their correspondence is done with finite state machines. It highlights the role of finite state machines in the complexity analysis and performs operations on very large virtual databases as finite state machines. It builds the state diagram and presents the commands and documents transition between the collaborative systems states. The paper analyzes the data sets from Collaborative Multicash Servicedesk application and performs a combined analysis in order to determine certain statistics. Indicators are obtained, such as the number of requests by category and the load degree of an agent in the collaborative system.

  5. Model-based systems engineering to design collaborative robotics applications

    NARCIS (Netherlands)

    Hernandez Corbato, Carlos; Fernandez-Sanchez, Jose Luis; Rassa, Bob; Carbone, Paolo

    2017-01-01

    Novel robot technologies are becoming available to automate more complex tasks, more flexibly, and collaborating with humans. Methods and tools are needed in the automation and robotics industry to develop and integrate this new breed of robotic systems. In this paper, the ISE&PPOOA

  6. INFORMATION TECHNOLOGY AS A DETERMINANT OF SMES COLLABORATION AND INNOVATIVENESS

    Directory of Open Access Journals (Sweden)

    Svetlana Cvetanovic

    2014-12-01

    Full Text Available Studies of small and medium-sized enterprise (SMEs development around the world show that the most significant factor for increasing their numbers and improving business success is the free enterprise, as exogenous, and innovation as an endogenous variable. At the same time, the dominant view in economic theory is that innovation is a key generator of changes for which the SMEs can be considered as a kind of metaphors for a successful business over the last twenty years in a number of economies. Arguing that cooperation between SMEs is increasingly common generic strategy of their development, the paper first explains the importance of collaboration to increase innovation and competitiveness, and then provides possible models using information technology such as Workflow Management Systems (WfMS, Service Oriented Architecture (SOA and Service-Oriented Cloud Computing Architecture (SOCCA to support the collaboration of these business entities. Solutions provided are aimed at improving the innovativeness of SMEs and fully follow the requirements of the so-called fifth-generation innovation process whose key attributes are integration and flexibility.

  7. Technology collaboration by means of an open source government

    Science.gov (United States)

    Berardi, Steven M.

    2009-05-01

    The idea of open source software originally began in the early 1980s, but it never gained widespread support until recently, largely due to the explosive growth of the Internet. Only the Internet has made this kind of concept possible, bringing together millions of software developers from around the world to pool their knowledge. The tremendous success of open source software has prompted many corporations to adopt the culture of open source and thus share information they previously held secret. The government, and specifically the Department of Defense (DoD), could also benefit from adopting an open source culture. In acquiring satellite systems, the DoD often builds walls between program offices, but installing doors between programs can promote collaboration and information sharing. This paper addresses the challenges and consequences of adopting an open source culture to facilitate technology collaboration for DoD space acquisitions. DISCLAIMER: The views presented here are the views of the author, and do not represent the views of the United States Government, United States Air Force, or the Missile Defense Agency.

  8. Collaboration and Virtualization in Large Information Systems Projects

    Directory of Open Access Journals (Sweden)

    Stefan Ioan NITCHI

    2009-01-01

    Full Text Available A project is evolving through different phases from idea and conception until the experiments, implementation and maintenance. The globalization, the Internet, the Web and the mobile computing changed many human activities, and in this respect, the realization of the Information System (IS projects. The projects are growing, the teams are geographically distributed, and the users are heterogeneous. In this respect, the realization of the large Information Technology (IT projects needs to use collaborative technologies. The distribution of the team, the users' heterogeneity and the project complexity determines the virtualization. This paper is an overview of these aspects for large IT projects. It shortly present a general framework developed by the authors for collaborative systems in general and adapted to collaborative project management. The general considerations are illustrated on the case of a large IT project in which the authors were involved.

  9. The Application of Collaborative Business Intelligence Technology in the Hospital SPD Logistics Management Model

    Science.gov (United States)

    LIU, Tongzhu; SHEN, Aizong; HU, Xiaojian; TONG, Guixian; GU, Wei

    2017-01-01

    Background: We aimed to apply collaborative business intelligence (BI) system to hospital supply, processing and distribution (SPD) logistics management model. Methods: We searched Engineering Village database, China National Knowledge Infrastructure (CNKI) and Google for articles (Published from 2011 to 2016), books, Web pages, etc., to understand SPD and BI related theories and recent research status. For the application of collaborative BI technology in the hospital SPD logistics management model, we realized this by leveraging data mining techniques to discover knowledge from complex data and collaborative techniques to improve the theories of business process. Results: For the application of BI system, we: (i) proposed a layered structure of collaborative BI system for intelligent management in hospital logistics; (ii) built data warehouse for the collaborative BI system; (iii) improved data mining techniques such as supporting vector machines (SVM) and swarm intelligence firefly algorithm to solve key problems in hospital logistics collaborative BI system; (iv) researched the collaborative techniques oriented to data and business process optimization to improve the business processes of hospital logistics management. Conclusion: Proper combination of SPD model and BI system will improve the management of logistics in the hospitals. The successful implementation of the study requires: (i) to innovate and improve the traditional SPD model and make appropriate implement plans and schedules for the application of BI system according to the actual situations of hospitals; (ii) the collaborative participation of internal departments in hospital including the department of information, logistics, nursing, medical and financial; (iii) timely response of external suppliers. PMID:28828316

  10. The Application of Collaborative Business Intelligence Technology in the Hospital SPD Logistics Management Model.

    Science.gov (United States)

    Liu, Tongzhu; Shen, Aizong; Hu, Xiaojian; Tong, Guixian; Gu, Wei

    2017-06-01

    We aimed to apply collaborative business intelligence (BI) system to hospital supply, processing and distribution (SPD) logistics management model. We searched Engineering Village database, China National Knowledge Infrastructure (CNKI) and Google for articles (Published from 2011 to 2016), books, Web pages, etc., to understand SPD and BI related theories and recent research status. For the application of collaborative BI technology in the hospital SPD logistics management model, we realized this by leveraging data mining techniques to discover knowledge from complex data and collaborative techniques to improve the theories of business process. For the application of BI system, we: (i) proposed a layered structure of collaborative BI system for intelligent management in hospital logistics; (ii) built data warehouse for the collaborative BI system; (iii) improved data mining techniques such as supporting vector machines (SVM) and swarm intelligence firefly algorithm to solve key problems in hospital logistics collaborative BI system; (iv) researched the collaborative techniques oriented to data and business process optimization to improve the business processes of hospital logistics management. Proper combination of SPD model and BI system will improve the management of logistics in the hospitals. The successful implementation of the study requires: (i) to innovate and improve the traditional SPD model and make appropriate implement plans and schedules for the application of BI system according to the actual situations of hospitals; (ii) the collaborative participation of internal departments in hospital including the department of information, logistics, nursing, medical and financial; (iii) timely response of external suppliers.

  11. Virtual Laboratory Enabling Collaborative Research in Applied Vehicle Technologies

    Science.gov (United States)

    Lamar, John E.; Cronin, Catherine K.; Scott, Laura E.

    2005-01-01

    The virtual laboratory is a new technology, based on the internet, that has had wide usage in a variety of technical fields because of its inherent ability to allow many users to participate simultaneously in instruction (education) or in the collaborative study of a common problem (real-world application). The leadership in the Applied Vehicle Technology panel has encouraged the utilization of this technology in its task groups for some time and its parent organization, the Research and Technology Agency, has done the same for its own administrative use. This paper outlines the application of the virtual laboratory to those fields important to applied vehicle technologies, gives the status of the effort, and identifies the benefit it can have on collaborative research. The latter is done, in part, through a specific example, i.e. the experience of one task group.

  12. Sharing knowledge, shaping Europe US technological collaboration and nonproliferation

    CERN Document Server

    Krige, John

    2016-01-01

    In the 1950s and the 1960s, U.S. administrations were determined to prevent Western European countries from developing independent national nuclear weapons programs. To do so, the United States attempted to use its technological pre-eminence as a tool of “soft power” to steer Western European technological choices toward the peaceful uses of the atom and of space, encouraging options that fostered collaboration, promoted nonproliferation, and defused challenges to U.S. technological superiority. In Sharing Knowledge, Shaping Europe, John Krige describes these efforts and the varying degrees of success they achieved. Krige explains that the pursuit of scientific and technological leadership, galvanized by America’s Cold War competition with the Soviet Union, was also used for techno-political collaboration with major allies. He examines a series of multinational arrangements involving shared technological platforms and aimed at curbing nuclear proliferation, and he describes the roles of the Department ...

  13. Is there a role for social technologies in collaborative healthcare?

    Science.gov (United States)

    Bacigalupe, Gonzalo

    2011-03-01

    The exponential growth, variety, and sophistication of the information communication technologies (ICTs) plus their growing accessibility are transforming how clinical practitioners, patients, and their families can work together. Social technologies are the ICTs tools that augment the ability of people to communicate and collaborate despite obstacles of geography and time. There is still little empirical research on the impact of social technologies in the case of collaborative health. Defining a set of social technologies with potential for developing, sustaining, and strengthening the collaborative health agenda should prove useful for practitioners and researchers. This paper is based on an extensive review of the literature focusing on emerging technologies and the experience of the author as a consultant to health care professionals learning about social technologies. A note of caution is required: the phenomenon is complex and hard to describe in writing (a medium very different from the technologies themselves). Hardware and software are in continuous development and the iterative adaptation of the emergent social technologies for new forms of virtual communication. (c) 2011 APA, all rights reserved

  14. Integrating Diverse Data Systems for International Collaboration

    Science.gov (United States)

    Fox, Peter

    2014-05-01

    International collaborations, especially ones that arise with little or no financial resources, still face challenges in opening up data collections via a wide variety of differing and often non-interoperable means. In turn, this hampers the collaborative process, slows or even prevents scientific exchange. Early efforts that proposed a centralized, and project specific data archive encountered many difficulties, ranging from little or no adoption, to the inability to provide required documentation and metadata to make the datasets findable or usable. In time, virtualized approaches appeared to gain traction, for e.g. virtual observatories. In this contribution, we report on several international collaboration case studies with distributed data systems; their needs, successes, challenges and failures and synthesize a set of suggested practices to inform future international collaboration efforts.

  15. University Research Collaborations on Nuclear Technology: A Legal Framework

    International Nuclear Information System (INIS)

    Nagakoshi, Y.

    2016-01-01

    Full text: International nuclear research collaborations are becoming increasingly important as the need for environmentally sound and safe energy technology grows. Despite having its risk, the benefits of using nuclear energy cannot be overlooked considering the energy crisis the world is facing. In order to maximize the safety of existing technology and promoting safe ways of taking advantage of nuclear energy, collaborative efforts of all who are involved in nuclear technology is necessary, regardless of national borders or affiliation. Non-conventional use of nuclear energy shall also be sought after in order to reduce greenhouse gas emission and to overcome the energy crisis the world is facing. It is therefore important that international collaborations among research institutes are promoted. Collaboration amongst universities poses a series of legal questions on how to form the framework, how to protect individual and communal inventions and how to share the fruits of the invention. This paper proposes a possible framework of collaboration and elaborates on possible legal issues and solutions. (author

  16. Managing collaboration across boundaries in health information technology projects.

    Science.gov (United States)

    Garrety, Karin; Dalley, Andrew; McLoughlin, Ian; Wilson, Rob; Yu, Ping

    2012-01-01

    One reason that it is so difficult to build electronic systems for collecting and sharing health information is that their design and implementation requires clear goals and a great deal of collaboration among people from diverse social and occupational worlds. This paper uses empirical examples from two Australian health informatics projects to illustrate the importance of boundary objects and boundary spanning activities in facilitating the high degree of collaboration required for the design and implementation of workable systems.

  17. Data governance and transparency for collaborative systems

    NARCIS (Netherlands)

    Mahmudlu, R.; den Hartog, J.; Zannone, N.

    2016-01-01

    As social networks, shared editing platforms and other collaborative systems are becoming increasingly popular, the demands for proper protection of the data created and used within these systems grows. Yet, existing access control mechanisms are not suited for the challenges imposed by

  18. Collaborative Educational Systems in the Virtual Environment

    Directory of Open Access Journals (Sweden)

    Cristian CIUREA

    2012-01-01

    Full Text Available The work leads to an original approach to the construction of collaborative systems metrics. The approach is based both on research already conducted by the author, on the experimental results obtained, and the foundation taken from the specific literature. The collaborative systems in knowledge-based economy are formalized and their characteristics are identified. The virtual campus structure is described and a comparison with the classical university is achieved. The architecture of virtual is designed and the categories of agents in virtual campus are analyzed.

  19. Enhancing technological innovation in small firms: Role of collaboration

    International Nuclear Information System (INIS)

    Singh, D; Khamba, J S; Nanda, T

    2014-01-01

    Contribution of Micro-Small and Medium Enterprises (MSMEs) is highly remarkable in the overall industrial economy of the country. In recent years, the MSME sector has consistently registered higher growth rate compared to the overall industrial sector. With its agility and dynamism, the sector has shown admirable innovativeness and adaptability to survive the recent economic downturn and recession. However, MSMEs growth rate is still at low level. Therefore, it becomes essential for organizations to adopt new technologies or upgrade existing setup to meet continuously changing global market and fulfill customer needs. This paper explores the relationships between different collaboration networks and technological innovation of small firms through an extensive review of literature. The study finds that collaboration with larger enterprises, R and D institutions, universities and government agencies play a significant role in enhancing technological innovation in small firms

  20. A Distributed and Collaborative Intelligent System for Medical Diagnosis

    Directory of Open Access Journals (Sweden)

    Wided LEJOUAD-CHAARI

    2013-08-01

    Full Text Available In this paper, we present a distributed collaborative system assisting physicians in diagnosis when processing medical images. This is a Web-based solution since the different participants and resources are on various sites. It is collaborative because these participants (physicians, radiologists, knowledgebasesdesigners, program developers for medical image processing, etc. can work collaboratively to enhance the quality of programs and then the quality of the diagnosis results. It is intelligent since it is a knowledge-based system including, but not only, a knowledge base, an inference engine said supervision engine and ontologies. The current work deals with the osteoporosis detection in bone radiographies. We rely on program supervision techniques that aim to automatically plan and control complex software usage. Our main contribution is to allow physicians, who are not experts in computing, to benefit from technological advances made by experts in image processing, and then to efficiently use various osteoporosis detection programs in a distributed environment.

  1. Transforming Power Systems Through Global Collaboration

    Energy Technology Data Exchange (ETDEWEB)

    2017-06-01

    Ambitious and integrated policy and regulatory frameworks are crucial to achieve power system transformation. The 21st Century Power Partnership -- a multilateral initiative of the Clean Energy Ministerial -- serves as a platform for public-private collaboration to advance integrated solutions for the large-scale deployment of renewable energy in combination with energy efficiency and grid modernization.

  2. Transforming Power Systems through Global Collaboration

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2016-04-01

    Ambitious and integrated policy and regulatory frameworks are crucial to achieve power system transformation. The 21st Century Power Partnership -- a multilateral initiative of the Clean Energy Ministerial -- serves as a platform for public-private collaboration to advance integrated solutions for the large-scale deployment of renewable energy in combination with energy efficiency and grid modernization.

  3. DIADEM: a system for collaborative environmental monitoring

    NARCIS (Netherlands)

    Winterboer, A.; Martens, M.A.; Pavlin, G.; Groen, F.C.A.; Evers, V.

    2011-01-01

    Environmental monitoring and emergency response projects in urban-industrial areas increasingly rely on efficient collaboration between experts in control rooms and at incident locations, and citizens who live or work in the area. In the video accompanying this abstract we present a system that uses

  4. CAM: A Collaborative Object Memory System

    NARCIS (Netherlands)

    Vyas, Dhaval; Nijholt, Antinus; Kröner, Alexander

    2010-01-01

    Physical design objects such as sketches, drawings, collages, storyboards and models play an important role in supporting communication and coordination in design studios. CAM (Cooperative Artefact Memory) is a mobile-tagging based messaging system that allows designers to collaboratively store

  5. International energy technology collaboration and climate change mitigation. Case study 1. Concentrating Solar Power Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Philibert, C. [Energy and Environment Division, International Energy Agency IEA, Paris (France)

    2004-07-01

    Mitigating climate change and achieving stabilisation of greenhouse gas atmospheric concentrations will require deep reductions in global emissions of energy-related carbon dioxide emissions. Developing and disseminating new, low-carbon energy technology will thus be needed. Two previous AIXG papers have focused on possible drivers for such a profound technological change: Technology Innovation, Development and Diffusion, released in June 2003, and International Energy Technology Collaboration and Climate Change Mitigation, released in June 2004. The first of these papers assesses a broad range of technical options for reducing energy-related CO2 emissions. It examines how technologies evolve and the role of research and development efforts, alternative policies, and short-term investment decisions in making long-term options available. It considers various policy tools that may induce technological change, some very specific, and others with broader expected effects. Its overall conclusion is that policies specifically designed to promote technical change, or 'technology push', could play a critical role in making available and affordable new energy technologies. However, such policies would not be sufficient to achieve the Convention's objective in the absence of broader policies. First, because there is a large potential for cuts that could be achieved in the short run with existing technologies; and second, the development of new technologies requires a market pull as much as a technology push. The second paper considers the potential advantages and disadvantages of international energy technology collaboration and transfer for promoting technological change. Advantages of collaboration may consist of lowering R and D costs and stimulating other countries to invest in R and D; disadvantage may include free-riding and the inefficiency of reaching agreement between many actors. This paper sets the context for further discussion on the role of

  6. Future Technology Workshop: A Collaborative Method for the Design of New Learning Technologies and Activities

    Science.gov (United States)

    Vavoula, Giasemi N.; Sharples, Mike

    2007-01-01

    We describe the future technology workshop (FTW), a method whereby people with everyday knowledge or experience in a specific area of technology use (such as using digital cameras) envision and design the interactions between current and future technology and activity. Through a series of structured workshop sessions, participants collaborate to…

  7. International Collaboration Activities on Engineered Barrier Systems

    Energy Technology Data Exchange (ETDEWEB)

    Jove-Colon, Carlos F. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-08-31

    The Used Fuel Disposition Campaign (UFDC) within the DOE Fuel Cycle Technologies (FCT) program has been engaging in international collaborations between repository R&D programs for high-level waste (HLW) disposal to leverage on gathered knowledge and laboratory/field data of near- and far-field processes from experiments at underground research laboratories (URL). Heater test experiments at URLs provide a unique opportunity to mimetically study the thermal effects of heat-generating nuclear waste in subsurface repository environments. Various configurations of these experiments have been carried out at various URLs according to the disposal design concepts of the hosting country repository program. The FEBEX (Full-scale Engineered Barrier Experiment in Crystalline Host Rock) project is a large-scale heater test experiment originated by the Spanish radioactive waste management agency (Empresa Nacional de Residuos Radiactivos S.A. – ENRESA) at the Grimsel Test Site (GTS) URL in Switzerland. The project was subsequently managed by CIEMAT. FEBEX-DP is a concerted effort of various international partners working on the evaluation of sensor data and characterization of samples obtained during the course of this field test and subsequent dismantling. The main purpose of these field-scale experiments is to evaluate feasibility for creation of an engineered barrier system (EBS) with a horizontal configuration according to the Spanish concept of deep geological disposal of high-level radioactive waste in crystalline rock. Another key aspect of this project is to improve the knowledge of coupled processes such as thermal-hydro-mechanical (THM) and thermal-hydro-chemical (THC) operating in the near-field environment. The focus of these is on model development and validation of predictions through model implementation in computational tools to simulate coupled THM and THC processes.

  8. Collaboration in Research and Engineering for Advanced Technology.

    Energy Technology Data Exchange (ETDEWEB)

    Vrieling, P. Douglas [Sandia National Lab. (SNL-CA), Livermore, CA (United States)

    2016-01-01

    SNL/CA proposes the Collaboration in Research and Engineering for Advanced Technology and Education (CREATE) facility to support customer-driven national security mission requirements while demonstrating a fiscally responsible approach to cost-control. SNL/CA realizes that due to the current backlog of capital projects in NNSA that following the normal Line Item process to procure capital funding is unlikely and therefore SNL/CA will be looking at all options including Alternative Financing.

  9. Collaborative Systems Driven Aircraft Configuration Design Optimization

    OpenAIRE

    Shiva Prakasha, Prajwal; Ciampa, Pier Davide; Nagel, Björn

    2016-01-01

    A Collaborative, Inside-Out Aircraft Design approach is presented in this paper. An approach using physics based analysis to evaluate the correlations between the airframe design, as well as sub-systems integration from the early design process, and to exploit the synergies within a simultaneous optimization process. Further, the disciplinary analysis modules involved in the optimization task are located in different organization. Hence, the Airframe and Subsystem design tools are integrated ...

  10. Collaborative Systems Biology Projects for the Military Medical Community.

    Science.gov (United States)

    Zalatoris, Jeffrey J; Scheerer, Julia B; Lebeda, Frank J

    2017-09-01

    This pilot study was conducted to examine, for the first time, the ongoing systems biology research and development projects within the laboratories and centers of the U.S. Army Medical Research and Materiel Command (USAMRMC). The analysis has provided an understanding of the breadth of systems biology activities, resources, and collaborations across all USAMRMC subordinate laboratories. The Systems Biology Collaboration Center at USAMRMC issued a survey regarding systems biology research projects to the eight U.S.-based USAMRMC laboratories and centers in August 2016. This survey included a data call worksheet to gather self-identified project and programmatic information. The general topics focused on the investigators and their projects, on the project's research areas, on omics and other large data types being collected and stored, on the analytical or computational tools being used, and on identifying intramural (i.e., USAMRMC) and extramural collaborations. Among seven of the eight laboratories, 62 unique systems biology studies were funded and active during the final quarter of fiscal year 2016. Of 29 preselected medical Research Task Areas, 20 were associated with these studies, some of which were applicable to two or more Research Task Areas. Overall, studies were categorized among six general types of objectives: biological mechanisms of disease, risk of/susceptibility to injury or disease, innate mechanisms of healing, diagnostic and prognostic biomarkers, and host/patient responses to vaccines, and therapeutic strategies including host responses to therapies. We identified eight types of omics studies and four types of study subjects. Studies were categorized on a scale of increasing complexity from single study subject/single omics technology studies (23/62) to studies integrating results across two study subject types and two or more omics technologies (13/62). Investigators at seven USAMRMC laboratories had collaborations with systems biology experts

  11. Student Collaboration and School Educational Technology: Technology Integration Practices in the Classroom

    Science.gov (United States)

    Scalise, Kathleen

    2016-01-01

    With the onset of Web 2.0 and 3.0--the social and semantic webs--a next wave for integration of educational technology into the classroom is occurring. The aim of this paper is to show how some teachers are increasingly bringing collaboration and shared meaning-making through technology environments into learning environments (Evergreen Education…

  12. Grid computing and collaboration technology in support of fusion energy sciences

    International Nuclear Information System (INIS)

    Schissel, D.P.

    2005-01-01

    Science research in general and magnetic fusion research in particular continue to grow in size and complexity resulting in a concurrent growth in collaborations between experimental sites and laboratories worldwide. The simultaneous increase in wide area network speeds has made it practical to envision distributed working environments that are as productive as traditionally collocated work. In computing power, it has become reasonable to decouple production and consumption resulting in the ability to construct computing grids in a similar manner as the electrical power grid. Grid computing, the secure integration of computer systems over high speed networks to provide on-demand access to data analysis capabilities and related functions, is being deployed as an alternative to traditional resource sharing among institutions. For human interaction, advanced collaborative environments are being researched and deployed to have distributed group work that is as productive as traditional meetings. The DOE Scientific Discovery through Advanced Computing Program initiative has sponsored several collaboratory projects, including the National Fusion Collaboratory Project, to utilize recent advances in grid computing and advanced collaborative environments to further research in several specific scientific domains. For fusion, the collaborative technology being deployed is being used in present day research and is also scalable to future research, in particular, to the International Thermonuclear Experimental Reactor experiment that will require extensive collaboration capability worldwide. This paper briefly reviews the concepts of grid computing and advanced collaborative environments and gives specific examples of how these technologies are being used in fusion research today

  13. Multiobjective Collaborative Optimization of Systems of Systems

    National Research Council Canada - National Science Library

    Wolf, Robert A

    2005-01-01

    ...; in other words an inefficient design of the system of systems. This thesis examines the simultaneous design of several ships using the sea base concept as an example application of a network of ships working together...

  14. A Study on planning of the international collaboration foundation for the Advanced Nuclear Technology Development Project

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Moon Hee; Kim, H. R.; Kim, H. J. and others

    2005-03-15

    Korea has participated in the international collaboration programs for the development of future nuclear energy systems driven by the countries holding advanced nuclear technology and Korea and U.S. have cooperated in the INERI. This study aimed mainly at developing the plan for participation in the collaborative development of the Gen IV, searching the participation strategy for INERI and the INPRO, and the international cooperation in these programs. Contents and scope of the study for successful achievement are as follows; Investigation and analysis of international and domestic trends related to advanced nuclear technologies, Development of the plan for collaborative development of the Gen IV and conducting the international cooperation activities, Support for the activities related to I-NERI between Korea and U.S. and conducting the international cooperation, International cooperation activities for the INPRO. This study can be useful for planning the research plan and setting up of the strategy of integrating the results of the international collaboration and the domestic R and D results by combining the Gen IV and the domestic R and D in the field of future nuclear technology. Futhermore, this study can contribute to establishing the effective foundation and broadening the cooperation activities not only with the advanced countries for acquisition of the advanced technologies but also with the developing countries for the export of the domestic nuclear energy systems.

  15. A Study on planning of the international collaboration foundation for the Advanced Nuclear Technology Development Project

    International Nuclear Information System (INIS)

    Chang, Moon Hee; Kim, H. R.; Kim, H. J. and others

    2005-03-01

    Korea has participated in the international collaboration programs for the development of future nuclear energy systems driven by the countries holding advanced nuclear technology and Korea and U.S. have cooperated in the INERI. This study aimed mainly at developing the plan for participation in the collaborative development of the Gen IV, searching the participation strategy for INERI and the INPRO, and the international cooperation in these programs. Contents and scope of the study for successful achievement are as follows; Investigation and analysis of international and domestic trends related to advanced nuclear technologies, Development of the plan for collaborative development of the Gen IV and conducting the international cooperation activities, Support for the activities related to I-NERI between Korea and U.S. and conducting the international cooperation, International cooperation activities for the INPRO. This study can be useful for planning the research plan and setting up of the strategy of integrating the results of the international collaboration and the domestic R and D results by combining the Gen IV and the domestic R and D in the field of future nuclear technology. Futhermore, this study can contribute to establishing the effective foundation and broadening the cooperation activities not only with the advanced countries for acquisition of the advanced technologies but also with the developing countries for the export of the domestic nuclear energy systems

  16. Expert system for web based collaborative CAE

    Science.gov (United States)

    Hou, Liang; Lin, Zusheng

    2006-11-01

    An expert system for web based collaborative CAE was developed based on knowledge engineering, relational database and commercial FEA (Finite element analysis) software. The architecture of the system was illustrated. In this system, the experts' experiences, theories and typical examples and other related knowledge, which will be used in the stage of pre-process in FEA, were categorized into analysis process and object knowledge. Then, the integrated knowledge model based on object-oriented method and rule based method was described. The integrated reasoning process based on CBR (case based reasoning) and rule based reasoning was presented. Finally, the analysis process of this expert system in web based CAE application was illustrated, and an analysis example of a machine tool's column was illustrated to prove the validity of the system.

  17. Maturing Pump Technology for EVA Applications in a Collaborative Environment

    Science.gov (United States)

    Hodgson, Edward; Dionne, Steven; Gervais, Edward; Anchondo, Ian

    2012-01-01

    The transition from low earth orbit Extravehicular Activity (EVA) for construction and maintenance activities to planetary surface EVA on asteroids, moons, and, ultimately, Mars demands a new spacesuit system. NASA's development of that system has resulted in dramatically different pumping requirements from those in the current spacesuit system. Hamilton Sundstrand, Cascon, and NASA are collaborating to develop and mature a pump that will reliably meet those new requirements in space environments and within the design constraints imposed by spacesuit system integration. That collaboration, which began in the NASA purchase of a pump prototype for test evaluation, is now entering a new phase of development. A second generation pump reflecting the lessons learned in NASA's testing of the original prototype will be developed under Hamilton Sundstrand internal research funding and ultimately tested in an integrated Advanced Portable Life Support System (APLSS) in NASA laboratories at the Johnson Space Center. This partnership is providing benefit to both industry and NASA by supplying a custom component for EVA integrated testing at no cost to the government while providing test data for industry that would otherwise be difficult or impossible to duplicate in industry laboratories. This paper discusses the evolving collaborative process, component requirements and design development based on early NASA test experience, component stand alone test results, and near term plans for integrated testing at JSCs.

  18. Avionics systems integration technology

    Science.gov (United States)

    Stech, George; Williams, James R.

    1988-01-01

    A very dramatic and continuing explosion in digital electronics technology has been taking place in the last decade. The prudent and timely application of this technology will provide Army aviation the capability to prevail against a numerically superior enemy threat. The Army and NASA have exploited this technology explosion in the development and application of avionics systems integration technology for new and future aviation systems. A few selected Army avionics integration technology base efforts are discussed. Also discussed is the Avionics Integration Research Laboratory (AIRLAB) that NASA has established at Langley for research into the integration and validation of avionics systems, and evaluation of advanced technology in a total systems context.

  19. Collaborative Cloud Manufacturing: Design of Business Model Innovations Enabled by Cyberphysical Systems in Distributed Manufacturing Systems

    Directory of Open Access Journals (Sweden)

    Erwin Rauch

    2016-01-01

    Full Text Available Collaborative cloud manufacturing, as a concept of distributed manufacturing, allows different opportunities for changing the logic of generating and capturing value. Cyberphysical systems and the technologies behind them are the enablers for new business models which have the potential to be disruptive. This paper introduces the topics of distributed manufacturing as well as cyberphysical systems. Furthermore, the main business model clusters of distributed manufacturing systems are described, including collaborative cloud manufacturing. The paper aims to provide support for developing business model innovations based on collaborative cloud manufacturing. Therefore, three business model architecture types of a differentiated business logic are discussed, taking into consideration the parameters which have an influence and the design of the business model and its architecture. As a result, new business models can be developed systematically and new ideas can be generated to boost the concept of collaborative cloud manufacturing within all sustainable business models.

  20. The Impact of Virtual Collaboration and Collaboration Technologies on Knowledge Transfer and Team Performance in Distributed Organizations

    Science.gov (United States)

    Ngoma, Ngoma Sylvestre

    2013-01-01

    Virtual teams are increasingly viewed as a powerful determinant of competitive advantage in geographically distributed organizations. This study was designed to provide insights into the interdependencies between virtual collaboration, collaboration technologies, knowledge transfer, and virtual team performance in an effort to understand whether…

  1. Using Genetic Algorithms for Building Metrics of Collaborative Systems

    Directory of Open Access Journals (Sweden)

    Cristian CIUREA

    2011-01-01

    Full Text Available he paper objective is to reveal the importance of genetic algorithms in building robust metrics of collaborative systems. The main types of collaborative systems in economy are presented and some characteristics of genetic algorithms are described. A genetic algorithm was implemented in order to determine the local maximum and minimum points of the relative complexity function associated to a collaborative banking system. The intelligent collaborative systems based on genetic algorithms, representing the new generation of collaborative systems, are analyzed and the implementation of auto-adaptive interfaces in a banking application is described.

  2. Validation of the Impact of Health Information Technology (I-HIT) Scale: an international collaborative.

    Science.gov (United States)

    Dykes, Patricia C; Hurley, Ann C; Brown, Suzanne; Carr, Robyn; Cashen, Margaret; Collins, Rita; Cook, Robyn; Currie, Leanne; Docherty, Charles; Ensio, Anneli; Foster, Joanne; Hardiker, Nicholas R; Honey, Michelle L L; Killalea, Rosaleen; Murphy, Judy; Saranto, Kaija; Sensmeier, Joyce; Weaver, Charlotte

    2009-01-01

    In 2005, the Healthcare Information Management Systems Society (HIMSS) Nursing Informatics Community developed a survey to measure the impact of health information technology (HIT), the I-HIT Scale, on the role of nurses and interdisciplinary communication in hospital settings. In 2007, nursing informatics colleagues from Australia, England, Finland, Ireland, New Zealand, Scotland and the United States formed a research collaborative to validate the I-HIT across countries. All teams have completed construct and face validation in their countries. Five out of six teams have initiated reliability testing by practicing nurses. This paper reports the international collaborative's validation of the I-HIT Scale completed to date.

  3. Harnessing collaborative technology to accelerate achievement of chronic disease management objectives for Canada.

    Science.gov (United States)

    Thompson, Leslee J; Healey, Lindsay; Falk, Will

    2007-01-01

    Morgan and colleagues put forth a call to action for the transformation of the Canadian healthcare system through the adoption of a national chronic disease prevention and management (CDPM) strategy. They offer examples of best practices and national solutions including investment in clinical information technologies to help support improved care and outcomes. Although we acknowledge that the authors propose CDPM solutions that are headed in the right direction, more rapid deployment of solutions that harness the potential of advanced collaborative technologies is required. We provide examples of how technologies that exist today can help to accelerate the achievement of some key CDPM objectives.

  4. Green Component Procurement Collaboration for Improving Supply Chain Management in the High Technology Industries: A Case Study from the Systems Perspective

    OpenAIRE

    Min-Ren Yan; Kuo-Ming Chien; Tai-Ning Yang

    2016-01-01

    The impacts of high technology industries have been growing increasingly to technological innovations and global economic developments, while the concerns in sustainability are calling for facilitating green materials and cleaner production in the industrial value chains. Today’s manufacturing companies are not striving for individual capacities but for the effective working with green supply chains. However, in addition to environmental and social objectives, cost and economic feasibility ha...

  5. Canonical correlation analysis between collaborative networks and innovation: A case study in information technology companies in province of Tehran, Iran

    Directory of Open Access Journals (Sweden)

    Ahmad Jafar Nejad

    2013-07-01

    Full Text Available The increase competitions as well as technological advancements have created motivation among business owners to look for more innovative ideas from outside their organizations. Many enterprises collaborate with other organizations to empower themselves through innovative ideas. These kinds of collaborations can be observed as a concept called Regional Innovation System. These collaborations include inter-firm collaborations, research organizations, intermediary institutions and governmental agencies. The primary objective of this paper is to evaluate relationships between Collaborative Networks and Innovation in information technology business units located in province of Tehran, Iran. The research method utilized for the present study is descriptive-correlation. To evaluate the relationships between independent and dependent variables, canonical correlation analysis (CCA is used. The results confirm the previous findings regarding the relationship between Collaborative Networks and Innovation. Among various dimensions of Collaboration, Collaboration with governmental agencies had a very small impact on the relationship between collaboration networks and innovation. In addition, the results show that in addition to affecting product innovation and process innovation, collaboration networks also affected management innovation.

  6. Exploring the Technological Collaboration Characteristics of the Global Integrated Circuit Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Yun Liu

    2018-01-01

    Full Text Available With the intensification of international competition, there are many international technological collaborations in the integrated circuit manufacturing (ICM industry. The importance of improving the level of international technological collaboration is becoming more and more prominent. Therefore, it is vital for a country, a region, or an institution to understand the international technological collaboration characteristics of the ICM industry and, thus, to know how to enhance its own international technological collaboration. This paper depicts the international technological collaboration characteristics of the ICM industry based on patent analysis. Four aspects, which include collaboration patterns, collaboration networks, collaboration institutions, and collaboration impacts, are analyzed by utilizing patent association analysis and social network analysis. The findings include the following: first, in regard to international technological collaboration, the USA has the highest level, while Germany has great potential for future development; second, Asia and Europe have already formed clusters, respectively, in the cooperative network; last, but not least, research institutions, colleges, and universities should also actively participate in international collaboration. In general, this study provides an objective reference for policy making, competitiveness, and sustainability in the ICM industry. The framework presented in this paper could be applied to examine other industrial international technological collaborations.

  7. Collaboration support system for "Phobos-Soil" space mission.

    Science.gov (United States)

    Nazarov, V.; Nazirov, R.; Zakharov, A.

    2009-04-01

    Rapid development of communication facilities leads growth of interactions done via electronic means. However we can see some paradox in this segment in last times: Extending of communication facilities increases collaboration chaos. And it is very sensitive for space missions in general and scientific space mission particularly because effective decision of this task provides successful realization of the missions and promises increasing the ratio of functional characteristic and cost of mission at all. Resolving of this problem may be found by using respective modern technologies and methods which widely used in different branches and not in the space researches only. Such approaches as Social Networking, Web 2.0 and Enterprise 2.0 look most prospective in this context. The primary goal of the "Phobos-Soil" mission is an investigation of the Phobos which is the Martian moon and particularly its regolith, internal structure, peculiarities of the orbital and proper motion, as well as a number of different scientific measurements and experiments for investigation of the Martian environment. A lot of investigators involved in the mission. Effective collaboration system is key facility for information support of the mission therefore. Further to main goal: communication between users of the system, modern approaches allows using such capabilities as self-organizing community, user generated content, centralized and federative control of the system. Also it may have one unique possibility - knowledge management which is very important for space mission realization. Therefore collaboration support system for "Phobos-Soil" mission designed on the base of multilayer model which includes such levels as Communications, Announcement and Information, Data sharing and Knowledge management. The collaboration support system for "Phobos-Soil" mission will be used as prototype for prospective Russian scientific space missions and the presentation describes its architecture

  8. Systems and Methods for Collaboratively Controlling at Least One Aircraft

    Science.gov (United States)

    Estkowski, Regina I. (Inventor)

    2016-01-01

    An unmanned vehicle management system includes an unmanned aircraft system (UAS) control station controlling one or more unmanned vehicles (UV), a collaborative routing system, and a communication network connecting the UAS and the collaborative routing system. The collaborative routing system being configured to receive flight parameters from an operator of the UAS control station and, based on the received flight parameters, automatically present the UAS control station with flight plan options to enable the operator to operate the UV in a defined airspace.

  9. NASA Technology Transfer System

    Science.gov (United States)

    Tran, Peter B.; Okimura, Takeshi

    2017-01-01

    NTTS is the IT infrastructure for the Agency's Technology Transfer (T2) program containing 60,000+ technology portfolio supporting all ten NASA field centers and HQ. It is the enterprise IT system for facilitating the Agency's technology transfer process, which includes reporting of new technologies (e.g., technology invention disclosures NF1679), protecting intellectual properties (e.g., patents), and commercializing technologies through various technology licenses, software releases, spinoffs, and success stories using custom built workflow, reporting, data consolidation, integration, and search engines.

  10. ATLAS Experiment: Collaboration at the frontiers of science and technology

    CERN Document Server

    2018-01-01

    ATLAS is run by a collaboration of physicists, engineers, technicians and support staff from around the world. It is one of the largest collaborative efforts ever attempted in science, with over 5000 members and almost 3000 scientific authors. The ATLAS Collaboration welcomes new collaborators for long-term engagement in the experiment.

  11. Enhancing Collaborative Learning in Web 2.0-Based E-Learning Systems: A Design Framework for Building Collaborative E-Learning Contents

    Science.gov (United States)

    El Mhouti, Abderrahim; Nasseh, Azeddine; Erradi, Mohamed; Vasquèz, José Marfa

    2017-01-01

    Today, the implication of Web 2.0 technologies in e-learning allows envisaging new teaching and learning forms, advocating an important place to the collaboration and social interaction. However, in e-learning systems, learn in a collaborative way is not always so easy because one of the difficulties when arranging e-learning courses can be that…

  12. The Effect of Student Collaboration in Solving Physics Problems Using an Online Interactive Response System

    OpenAIRE

    Balta, Nuri; Awedh, Mohammad Hamza

    2016-01-01

    Advanced technology helps educational institutes to improve student learning performance and outcomes. In this study, our aim is to measure and assess student engagement and collaborative learning in engineering classes when using online technology in solving physics problems. The interactive response system used in this study is a collaborative learning tool that allows teachers to monitor their students’ response and progress in real time. Our results indicated that students have highly pos...

  13. The solenoidal detector collaboration silicon detector system

    International Nuclear Information System (INIS)

    Ziock, H.J.; Gamble, M.T.; Miller, W.O.; Palounek, A.P.T.; Thompson, T.C.

    1992-01-01

    Silicon tracking systems (STS) will be fundamental components of the tracking systems for both planned major SSC experiments. The STS is physically a small part of the central tracking system and the calorimeter of the detector being proposed by the Solenoidal Detector Collaboration (SDC). Despite its seemingly small size, it occupies a volume of more than 5 meters in length and 1 meter in diameter and is an order of magnitude larger than any silicon detector system previously built. The STS will consist of silicon microstrip detectors and possibly silicon pixel detectors. The other two components are an outer barrel tracker, which will consist of straw tubes or scintillating fibers; and an outer intermediate angle tracker, which will consist of gas microstrips. The components are designed to work as an integrated system. Each componenet has specific strengths, but is individually incapable of providing the overall performance required by the physics goals of the SSC. The large particle fluxes, the short times between beam crossing, the high channel count, and the required very high position measurement accuracy pose challenging problems that must be solved. Furthermore, to avoid degrading the measurements, the solutions must be achieved using only a minimal amount of material. An additional constraint is that only low-Z materials are allowed. If that were not difficlut enough, the solutions must also be affordable

  14. Collaborative Action Research on Technology Integration for Science Learning

    Science.gov (United States)

    Wang, Chien-Hsing; Ke, Yi-Ting; Wu, Jin-Tong; Hsu, Wen-Hua

    2012-02-01

    This paper briefly reports the outcomes of an action research inquiry on the use of blogs, MS PowerPoint [PPT], and the Internet as learning tools with a science class of sixth graders for project-based learning. Multiple sources of data were essential to triangulate the key findings articulated in this paper. Corresponding to previous studies, the incorporation of technology and project-based learning could motivate students in self-directed exploration. The students were excited about the autonomy over what to learn and the use of PPT to express what they learned. Differing from previous studies, the findings pointed to the lack information literacy among students. The students lacked information evaluation skills, note-taking and information synthesis. All these findings imply the importance of teaching students about information literacy and visual literacy when introducing information technology into the classroom. The authors suggest that further research should focus on how to break the culture of "copy-and-paste" by teaching the skills of note-taking and synthesis through inquiry projects for science learning. Also, further research on teacher professional development should focus on using collaboration action research as a framework for re-designing graduate courses for science teachers in order to enhance classroom technology integration.

  15. The Impact of an Online Collaborative Learning Program on Students' Attitude towards Technology

    Science.gov (United States)

    Magen-Nagar, Noga; Shonfeld, Miri

    2018-01-01

    This quantitative research examined the contribution of an Online Collaborative Learning (OCL) program on attitudes towards technology in terms of technological anxiety, self-confidence and technology orientation among M.Ed. students. The advanced online collaborative program was implemented at two teacher training colleges in Israel for a period…

  16. Proceedings 2nd International Workshop on Technologies for Collaborative Processes and Management of Enterprise Information Systems (TCoB & MEIS 2007)

    NARCIS (Netherlands)

    Sadiq, S.; Reichert, M.U.; Schulz, K.; Trienekens, J.; Moller, C.; Kusters, R.J.

    Enterprise Information Systems (EIS) like ERP-, CRM- and SCM-systems are pervasive in today’s organizations. EIS implementation projects ask for major financial investments of organizations. They impact many processes and employees of an organization and require significant organizational change.

  17. Implementation of a Web-Based Collaborative Process Planning System

    Science.gov (United States)

    Wang, Huifen; Liu, Tingting; Qiao, Li; Huang, Shuangxi

    Under the networked manufacturing environment, all phases of product manufacturing involving design, process planning, machining and assembling may be accomplished collaboratively by different enterprises, even different manufacturing stages of the same part may be finished collaboratively by different enterprises. Based on the self-developed networked manufacturing platform eCWS(e-Cooperative Work System), a multi-agent-based system framework for collaborative process planning is proposed. In accordance with requirements of collaborative process planning, share resources provided by cooperative enterprises in the course of collaboration are classified into seven classes. Then a reconfigurable and extendable resource object model is built. Decision-making strategy is also studied in this paper. Finally a collaborative process planning system e-CAPP is developed and applied. It provides strong support for distributed designers to collaboratively plan and optimize product process though network.

  18. Impact of Collaborative Work on Technology Acceptance: A Case Study from Virtual Computing

    Directory of Open Access Journals (Sweden)

    Abdullah Konak

    2016-12-01

    Findings\tThe findings of the study supported that collaborative work could improve non-technology students’ acceptance of RVCLs. However, no significant effect of collaborative work on technology acceptance was observed in the case of technology students. Recommendations for Practitioners\tEducators should consider the benefits of collaborative work while introducing a new technology to students who may not have background in the technology introduced. Recommendation for Researchers In this study, student technological background was found to be a significant factor for technology acceptance; hence, it is recommended that technological background is included in TAM studies as an external factor. Future Research\tRepeating similar studies with multiple exercises with varying degrees of challenge is required for a better understanding of how collaborative work and student technological background affect technology acceptance.

  19. Value Systems Alignment Analysis in Collaborative Networked Organizations Management

    OpenAIRE

    Patricia Macedo; Luis Camarinha-Matos

    2017-01-01

    The assessment of value systems alignment can play an important role in the formation and evolution of collaborative networks, contributing to reduce potential risks of collaboration. For this purpose, an assessment tool is proposed as part of a collaborative networks information system, supporting both the formation and evolution of long-term strategic alliances and goal-oriented networks. An implementation approach for value system alignment analysis is described, which is intended to assis...

  20. Movie Recommendation System Based on Collaborative Filtering

    OpenAIRE

    Kejun, Wang

    2013-01-01

    With the explosively growing of the technologies and services of the Internet, the information data world increases rapidly. Recommendation systems have acted an important role in many ways, including movies, books, friends, shopping on net and music. Especially like today, people are surrounded by mass of information. People try to find their preferred movies. It has become difficult when facing so many kinds of movies. People may dizzied by plenty of items on the net, they don't know how to...

  1. Applying Adaptive Swarm Intelligence Technology with Structuration in Web-Based Collaborative Learning

    Science.gov (United States)

    Huang, Yueh-Min; Liu, Chien-Hung

    2009-01-01

    One of the key challenges in the promotion of web-based learning is the development of effective collaborative learning environments. We posit that the structuration process strongly influences the effectiveness of technology used in web-based collaborative learning activities. In this paper, we propose an ant swarm collaborative learning (ASCL)…

  2. Collaborative Recurrent Neural Networks forDynamic Recommender Systems

    Science.gov (United States)

    2016-11-22

    JMLR: Workshop and Conference Proceedings 63:366–381, 2016 ACML 2016 Collaborative Recurrent Neural Networks for Dynamic Recommender Systems Young...an unprece- dented scale. Although such activity logs are abundantly available, most approaches to recommender systems are based on the rating...Recurrent Neural Network, Recommender System , Neural Language Model, Collaborative Filtering 1. Introduction As ever larger parts of the population

  3. Research Funding, Patent Search Training and Technology Transfer: a collaboration

    KAUST Repository

    Tyhurst, Janis

    2016-01-01

    This paper will focus on the collaboration efforts of three different university departments to create, teach and evaluate the benefits of a joint patent training series, as well as the future directions this collaboration will take. KAUST has as one of its goals the diversification of the Saudi economy. There is a strong focus at the university on developing entrepreneurial ideas and commercializing research done. The University Library supports this goal through the provision of electronic resources and introductory patent search training skills. However, the patent training class offered by the University Library is only one step in a process that faculty and students need when starting or taking their research to the next level. In the Fall of 2015, I met with representatives of the two major stakeholders in the patent arena, the office of Sponsored Research (OSR) and the Technology Transfer Office (TTO), to develop a patent training program to meet the needs of researchers. The OSR provides funding to researchers who have demonstrated that their ideas have merit with potential applications, the TTO works with researchers who are at the point of needing IP protection. The resulting discussion led us to collaborate on creating a workshop series that benefit the researcher’s information needs and each of our departments as well. In the first of the series of three 2 hour workshops, the Manager of TTO and the Lead Integrative Specialist from the OSR presented a workshop on an overview of Intellectual Property and the patenting process. These presentations focused on when and how to determine whether research is potentially patentable, why a researcher needs to protect his/her research and how to go about protecting it. The second workshop focused on introductory patent search skills and tools, how to expand a literature search to include the information found in patents, and how this kind of research will improve not only the literature search but the research

  4. SIMON: Remote collaboration system based on large scale simulation

    International Nuclear Information System (INIS)

    Sugawara, Akihiro; Kishimoto, Yasuaki

    2003-01-01

    Development of SIMON (SImulation MONitoring) system is described. SIMON aims to investigate many physical phenomena of tokamak type nuclear fusion plasma by simulation and to exchange information and to carry out joint researches with scientists in the world using internet. The characteristics of SIMON are followings; 1) decrease load of simulation by trigger sending method, 2) visualization of simulation results and hierarchical structure of analysis, 3) decrease of number of license by using command line when software is used, 4) improvement of support for using network of simulation data output by use of HTML (Hyper Text Markup Language), 5) avoidance of complex built-in work in client part and 6) small-sized and portable software. The visualization method of large scale simulation, remote collaboration system by HTML, trigger sending method, hierarchical analytical method, introduction into three-dimensional electromagnetic transportation code and technologies of SIMON system are explained. (S.Y.)

  5. Science and Technology (S and T) Roadmap Collaboration between SMC, NASA, and Government Partners

    Science.gov (United States)

    Betser, Joseph; Ewart, Roberta; Chandler, Faith

    2016-01-01

    National Security Space (NSS) presents multi-faceted S and T challenges. We must continually innovate enterprise and information management; provide decision support; develop advanced materials; enhance sensor technology; transform communication technology; develop advanced propulsion and resilient space architectures and capabilities; and enhance multiple additional S and T domains. These challenges are best met by leveraging advanced S and T research and technology development from a number of DoD agencies and civil agencies such as NASA. The authors of this paper have engaged in these activities since 2006 and over the past decade developed multiple strategic S and T relationships. This paper highlights the Office of the Space Missile Systems Center (SMC) Chief Scientist (SMC/ST) collaboration with the NASA Office of Chief Technologist (NASA OCT), which has multiple S and T activities that are relevant to NSS. In particular we discuss the development of the Technology Roadmaps that benefit both Civil Space and NSS. Our collaboration with NASA OCT has been of mutual benefit to multiple participants. Some of the other DoD components include the Defense Advanced Research Projects agency (DARPA), Air Force Research Laboratory (AFRL), Naval Research Laboratory (NRL), The USAF Office of Chief Scientist, the USAF Science Advisory Board (SAB), Space and Naval Warfare Systems Command (SPAWAR), and a number of other services and agencies. In addition, the human talent is a key enabler of advanced S and T activities; it is absolutely critical to have a strong supply of talent in the fields of Science Technology, Engineering, and Mathematics (STEM). Consequently, we continually collaborate with the USAF Institute of Technology (AFIT), other service academies and graduate schools, and other universities and colleges. This paper highlights the benefits that result from such strategic S and T partnerships and recommends a way forward that will continually build upon these

  6. The Uses (and Misuses) of Collaborative Distance Education Technologies Implications for the Debate on Transience in Technology: Implications for the Debate on Transience in Technology

    Science.gov (United States)

    Chang, YunJeong; Hannafin, Michael J.

    2015-01-01

    Collaborative learning technologies (tools that are used for facilitating or mediating collaborative learning) have been widely incorporated in distance education as well as broadly adopted in higher education. While a range of collaborative technologies has been incorporated, their implementation has often failed to align with well-established…

  7. Predicting User Acceptance of Collaborative Technologies: An Extension of the Technology Acceptance Model for E-Learning

    Science.gov (United States)

    Cheung, Ronnie; Vogel, Doug

    2013-01-01

    Collaborative technologies support group work in project-based environments. In this study, we enhance the technology acceptance model to explain the factors that influence the acceptance of Google Applications for collaborative learning. The enhanced model was empirically evaluated using survey data collected from 136 students enrolled in a…

  8. A Study on intensifying efficiency for international collaborative development of Advanced Nuclear Energy Technology

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Moon Hee; Kim, H. R.; Kim, H. J.; Chang, J. H.; Hahn, D. H.; Bae, Y. Y.; Kim, W. W.; Jeong, I.; Lee, D. S.; Lee, J. H. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2008-06-15

    Generation IV International Forum(GIF), where 13 countries including Korea collaborate to develop future nuclear energy systems, put into force 'Generation IV International Forum Project Arrangement' in 2007 for the international research and development of Gen IV Systems, following the entry into force of Framework Agreement in 2005. The International Nuclear Research Initiative(I-NERI) between Korea and United States and the International Project on Innovative Nuclear Energy Systems and Fuel Cycles(INPRO) of IAEA are continued in this year, produced lots of visible outcomes. These international activities have a common goal of the collaborative development of advanced nuclear system technologies but differ in the main focusing areas and aspects, so Korea needs to establish the integrated strategy based on the distinguished and complementary approach for the participation of each international programs, as examples the GIF for the advanced system technology development, INPRO for the set-up of institution and infra-structure, and I-NERI for the access of the core technologies and acquisition of the transparency of nuclear R and D.

  9. A Study on intensifying efficiency for international collaborative development of Advanced Nuclear Energy Technology

    International Nuclear Information System (INIS)

    Chang, Moon Hee; Kim, H. R.; Kim, H. J.; Chang, J. H.; Hahn, D. H.; Bae, Y. Y.; Kim, W. W.; Jeong, I.; Lee, D. S.; Lee, J. H.

    2008-06-01

    Generation IV International Forum(GIF), where 13 countries including Korea collaborate to develop future nuclear energy systems, put into force 'Generation IV International Forum Project Arrangement' in 2007 for the international research and development of Gen IV Systems, following the entry into force of Framework Agreement in 2005. The International Nuclear Research Initiative(I-NERI) between Korea and United States and the International Project on Innovative Nuclear Energy Systems and Fuel Cycles(INPRO) of IAEA are continued in this year, produced lots of visible outcomes. These international activities have a common goal of the collaborative development of advanced nuclear system technologies but differ in the main focusing areas and aspects, so Korea needs to establish the integrated strategy based on the distinguished and complementary approach for the participation of each international programs, as examples the GIF for the advanced system technology development, INPRO for the set-up of institution and infra-structure, and I-NERI for the access of the core technologies and acquisition of the transparency of nuclear R and D

  10. Health Maintenance System (HMS) Hardware Research, Design, and Collaboration

    Science.gov (United States)

    Gonzalez, Stefanie M.

    2010-01-01

    The Space Life Sciences division (SLSD) concentrates on optimizing a crew member's health. Developments are translated into innovative engineering solutions, research growth, and community awareness. This internship incorporates all those areas by targeting various projects. The main project focuses on integrating clinical and biomedical engineering principles to design, develop, and test new medical kits scheduled for launch in the Spring of 2011. Additionally, items will be tagged with Radio Frequency Interference Devices (RFID) to keep track of the inventory. The tags will then be tested to optimize Radio Frequency feed and feed placement. Research growth will occur with ground based experiments designed to measure calcium encrusted deposits in the International Space Station (ISS). The tests will assess the urine calcium levels with Portable Clinical Blood Analyzer (PCBA) technology. If effective then a model for urine calcium will be developed and expanded to microgravity environments. To support collaboration amongst the subdivisions of SLSD the architecture of the Crew Healthcare Systems (CHeCS) SharePoint site has been redesigned for maximum efficiency. Community collaboration has also been established with the University of Southern California, Dept. of Aeronautical Engineering and the Food and Drug Administration (FDA). Hardware disbursements will transpire within these communities to support planetary surface exploration and to serve as an educational tool demonstrating how ground based medicine influenced the technological development of space hardware.

  11. Reviews of Geospatial Information Technology and Collaborative Data Delivery for Disaster Risk Management

    Directory of Open Access Journals (Sweden)

    Hiroyuki Miyazaki

    2015-09-01

    Full Text Available Due to the fact that geospatial information technology is considered necessary for disaster risk management (DRM, the need for more effective collaborations between providers and end users in data delivery is increasing. This paper reviews the following: (i schemes of disaster risk management and collaborative data operation in DRM; (ii geospatial information technology in terms of applications to the schemes reviewed; and (iii ongoing practices of collaborative data delivery with the schemes reviewed. This paper concludes by discussing the future of collaborative data delivery and the progress of the technologies.

  12. A network collaboration implementing technology to improve medication dispensing and administration in critical access hospitals.

    Science.gov (United States)

    Wakefield, Douglas S; Ward, Marcia M; Loes, Jean L; O'Brien, John

    2010-01-01

    We report how seven independent critical access hospitals collaborated with a rural referral hospital to standardize workflow policies and procedures while jointly implementing the same health information technologies (HITs) to enhance medication care processes. The study hospitals implemented the same electronic health record, computerized provider order entry, pharmacy information systems, automated dispensing cabinets (ADC), and barcode medication administration systems. We conducted interviews and examined project documents to explore factors underlying the successful implementation of ADC and barcode medication administration across the network hospitals. These included a shared culture of collaboration; strategic sequencing of HIT component implementation; interface among HIT components; strategic placement of ADCs; disciplined use and sharing of workflow analyses linked with HIT applications; planning for workflow efficiencies; acquisition of adequate supply of HIT-related devices; and establishing metrics to monitor HIT use and outcomes.

  13. VENTILATION TECHNOLOGY SYSTEMS ANALYSIS

    Science.gov (United States)

    The report gives results of a project to develop a systems analysis of ventilation technology and provide a state-of-the-art assessment of ventilation and indoor air quality (IAQ) research needs. (NOTE: Ventilation technology is defined as the hardware necessary to bring outdoor ...

  14. Collaborative Professional Development in Higher Education: Developing Knowledge of Technology Enhanced Teaching

    Science.gov (United States)

    Jaipal-Jamani, Kamini; Figg, Candace; Gallagher, Tiffany; Scott, Ruth McQuirter; Ciampa, Katia

    2015-01-01

    This paper describes a professional development initiative for teacher educators, called the "Digital Pedagogies Collaboration," in which the goal was to build faculty knowledge about technology enhanced teaching (TPACK knowledge), develop a collaborative learning and research community of faculty members around technology enhanced…

  15. Collaborative Project-Based Learning: An Integrative Science and Technological Education Project

    Science.gov (United States)

    Baser, Derya; Ozden, M. Yasar; Karaarslan, Hasan

    2017-01-01

    Background: Blending collaborative learning and project-based learning (PBL) based on Wolff (2003) design categories, students interacted in a learning environment where they developed their technology integration practices as well as their technological and collaborative skills. Purpose: The study aims to understand how seventh grade students…

  16. Has Research on Collaborative Learning Technologies Addressed Massiveness? A Literature Review

    Science.gov (United States)

    Manathunga, Kalpani; Hernández-Leo, Davinia

    2015-01-01

    There is a growing interest in understanding to what extent innovative educational technologies can be used to support massive courses. Collaboration is one of the main desired elements in massive learning actions involving large communities of participants. Accumulated research in collaborative learning technologies has proposed and evaluated…

  17. Social Network Analysis of 50 Years of International Collaboration in the Research of Educational Technology

    Science.gov (United States)

    Guo, Shesen; Zhang, Ganzhou; Guo, Yufei

    2016-01-01

    The definition of the field of educational technology has evolved over 50 years. New inventions and economic globalization increasingly facilitate people's communication for exchange of ideas and collaboration. This work attempts to describe international research collaboration in educational technology for the past 50 years. This article intends…

  18. Applying an Activity System to Online Collaborative Group Work Analysis

    Science.gov (United States)

    Choi, Hyungshin; Kang, Myunghee

    2010-01-01

    This study determines whether an activity system provides a systematic framework to analyse collaborative group work. Using an activity system as a unit of analysis, the research examined learner behaviours, conflicting factors and facilitating factors while students engaged in collaborative work via asynchronous computer-mediated communication.…

  19. Social Intelligence in a Human-Machine Collaboration System

    Science.gov (United States)

    Nakajima, Hiroshi; Morishima, Yasunori; Yamada, Ryota; Brave, Scott; Maldonado, Heidy; Nass, Clifford; Kawaji, Shigeyasu

    In this information society of today, it is often argued that it is necessary to create a new way of human-machine interaction. In this paper, an agent with social response capabilities has been developed to achieve this goal. There are two kinds of information that is exchanged by two entities: objective and functional information (e.g., facts, requests, states of matters, etc.) and subjective information (e.g., feelings, sense of relationship, etc.). Traditional interactive systems have been designed to handle the former kind of information. In contrast, in this study social agents handling the latter type of information are presented. The current study focuses on sociality of the agent from the view point of Media Equation theory. This article discusses the definition, importance, and benefits of social intelligence as agent technology and argues that social intelligence has a potential to enhance the user's perception of the system, which in turn can lead to improvements of the system's performance. In order to implement social intelligence in the agent, a mind model has been developed to render affective expressions and personality of the agent. The mind model has been implemented in a human-machine collaborative learning system. One differentiating feature of the collaborative learning system is that it has an agent that performs as a co-learner with which the user interacts during the learning session. The mind model controls the social behaviors of the agent, thus making it possible for the user to have more social interactions with the agent. The experiment with the system suggested that a greater degree of learning was achieved when the students worked with the co-learner agent and that the co-learner agent with the mind model that expressed emotions resulted in a more positive attitude toward the system.

  20. Incorporating Collaborative Technologies into University Curricula: Lessons Learned

    Science.gov (United States)

    Hunt, C. Steven; Smith, Lola B.; Chen, Minder

    2010-01-01

    Web-based collaboration tools and groupware are uniquely qualified to address the emerging business opportunities heretofore hindered by location barriers, constraints of time, and expensive travel costs. Global business enterprises are implementing online collaboration software to augment their face-to-face meetings and group decision making in…

  1. Tangible Technology-Enhanced Learning for Improvement of Student Collaboration

    Science.gov (United States)

    Barneva, Reneta P.; Gelsomini, Federico; Kanev, Kamen; Bottoni, Paolo

    2018-01-01

    Collaboration among students in the course of learning plays an important role in developing communication skills. In particular, it helps for team building and brainstorming on solutions of complex problems. While an effective group organization is critical for the success of such collaborative learning, many instructors would make arbitrary…

  2. An APF and MPC combined collaborative driving controller using vehicular communication technologies

    International Nuclear Information System (INIS)

    Huang, Zichao; Wu, Qing; Ma, Jie; Fan, Shiqi

    2016-01-01

    Collaborative driving is a growing domain of Intelligent Transportation Systems (ITS) which aim to navigate traffic both efficiently and safely. Cooperation between vehicles heavily rely on the comprehensive information collected. With the development of vehicular communication technologies, information can be shared between vehicles or infrastructures through Vehicle-to-Vehicle (V2V)/Vehicle-to-Infrastructure (V2I) data exchange. By taking advantage of data sharing between vehicles, this paper proposes an Artificial Potential Field (APF) and Model Predictive Control (MPC) combined controller to implement collaborative driving in complex environments. Firstly, an APF model ​containing three components is developed to describe the mutual effect and collaboration properties between vehicles and surrounding environments. Afterwards, a MPC cost function for optimized control, considering both kinematic characteristics and environmental effect conveyed by APF, is presented to address the problem of collaborative driving. Such controller is designed from the perspective of multi-objective and multi-constraint optimization which takes the vehicle motion constraints, safety and comfort requirements into consideration. The prominent advantage of the proposed approach is that it can deal with the problems of route planning and manipulating simultaneously. To validate the proposed approach, a variety of scenario simulations are conducted in MATLAB, and the performance of the proposed method are verified.

  3. Students' Perceptions of Self-Directed Learning and Collaborative Learning with and without Technology

    Science.gov (United States)

    Lee, K.; Tsai, P.-S.; Chai, C. S.; Koh, J. H. L.

    2014-01-01

    This study explored students' perceptions of self-directed learning (SDL) and collaborative learning (CL) with/without technology in an information and communications technology-supported classroom environment. The factors include SDL, CL, SDL supported by technology, and CL supported by technology. Based on the literature review, this study…

  4. Technology based Education System

    DEFF Research Database (Denmark)

    Kant Hiran, Kamal; Doshi, Ruchi; Henten, Anders

    2016-01-01

    Abstract - Education plays a very important role for the development of the country. Education has multiple dimensions from schooling to higher education and research. In all these domains, there is invariably a need for technology based teaching and learning tools are highly demanded in the acad......Abstract - Education plays a very important role for the development of the country. Education has multiple dimensions from schooling to higher education and research. In all these domains, there is invariably a need for technology based teaching and learning tools are highly demanded...... in the academic institutions. Thus, there is a need of comprehensive technology support system to cater the demands of all educational actors. Cloud Computing is one such comprehensive and user-friendly technology support environment that is the need of an hour. Cloud computing is the emerging technology that has...

  5. Intelligent Tutoring Systems for Collaborative Learning: Enhancements to Authoring Tools

    Science.gov (United States)

    Olsen, Jennifer K.; Belenky, Daniel M.; Aleven, Vincent; Rummel, Nikol

    2013-01-01

    Collaborative and individual instruction may support different types of knowledge. Optimal instruction for a subject domain may therefore need to combine these two modes of instruction. There has not been much research, however, on combining individual and collaborative learning with Intelligent Tutoring Systems (ITSs). A first step is to expand…

  6. Collaborative Point Paper on Active Protection Systems

    National Research Council Canada - National Science Library

    2006-01-01

    The North American Technology and Industrial Base Organization (NATIBO) fosters cooperative planning for technology and industrial base program development among and between the Defense Departments of the U.S. and Canada...

  7. Supporting collaborative discussions on asynchronous time: a technological perspective

    OpenAIRE

    Caballé, Santi

    2011-01-01

    The aim of this paper is to report on an experience of using an innovative on-line learning tool to support real, collaborative learning through discussion in asynchronous time. While asynchronous interaction gives rise to unique opportunities that support active, collaborative learning, unique problems also arise, such as frustration, caused by waiting for other peoples' reactions and feedback and the consequent loss of motivation, which has a negative impact on learning outcomes. In order t...

  8. Technology Support for Discussion Based Learning: From Computer Supported Collaborative Learning to the Future of Massive Open Online Courses

    Science.gov (United States)

    Rosé, Carolyn Penstein; Ferschke, Oliver

    2016-01-01

    This article offers a vision for technology supported collaborative and discussion-based learning at scale. It begins with historical work in the area of tutorial dialogue systems. It traces the history of that area of the field of Artificial Intelligence in Education as it has made an impact on the field of Computer-Supported Collaborative…

  9. Improving collaboration between primary care research networks using Access Grid technology

    Directory of Open Access Journals (Sweden)

    Zsolt Nagykaldi

    2008-05-01

    Full Text Available Access Grid (AG is an Internet2-driven, high performance audio_visual conferencing technology used worldwide by academic and government organisations to enhance communication, human interaction and group collaboration. AG technology is particularly promising for improving academic multi-centre research collaborations. This manuscript describes how the AG technology was utilised by the electronic Primary Care Research Network (ePCRN that is part of the National Institutes of Health (NIH Roadmap initiative to improve primary care research and collaboration among practice- based research networks (PBRNs in the USA. It discusses the design, installation and use of AG implementations, potential future applications, barriers to adoption, and suggested solutions.

  10. Emergent collaboration infrastructures technology design for inter-organizational crisis management

    CERN Document Server

    Reuter, Christian

    2015-01-01

    ​Using the domain of crisis management, Christian Reuter explores challenges and opportunities for technology design in emergent environments. He therefore empirically analyzes collaborative work in inter-organizational crisis - such as the police, fire departments, energy network operators and citizens - in order to identify collaboration practices that reveal work infrastructure limitations. He also designs, implements and evaluates novel concepts and ICT artifacts towards the support of emergent collaboration. Besides the discovery of potential organizational effects on the ability to deal

  11. Modeling and Control of Collaborative Robot System using Haptic Feedback

    Directory of Open Access Journals (Sweden)

    Vivekananda Shanmuganatha

    2017-08-01

    Full Text Available When two robot systems can share understanding using any agreed knowledge, within the constraints of the system’s communication protocol, the approach may lead to a common improvement. This has persuaded numerous new research inquiries in human-robot collaboration. We have built up a framework prepared to do independent following and performing table-best protest object manipulation with humans and we have actualized two different activity models to trigger robot activities. The idea here is to explore collaborative systems and to build up a plan for them to work in a collaborative environment which has many benefits to a single more complex system. In the paper, two robots that cooperate among themselves are constructed. The participation linking the two robotic arms, the torque required and parameters are analyzed. Thus the purpose of this paper is to demonstrate a modular robot system which can serve as a base on aspects of robotics in collaborative robots using haptics.

  12. Explaining technological change of wind power in China and the United States: Roles of energy policies, technological learning, and collaboration

    Science.gov (United States)

    Tang, Tian

    The following dissertation explains how technological change of wind power, in terms of cost reduction and performance improvement, is achieved in China and the US through energy policies, technological learning, and collaboration. The objective of this dissertation is to understand how energy policies affect key actors in the power sector to promote renewable energy and achieve cost reductions for climate change mitigation in different institutional arrangements. The dissertation consists of three essays. The first essay examines the learning processes and technological change of wind power in China. I integrate collaboration and technological learning theories to model how wind technologies are acquired and diffused among various wind project participants in China through the Clean Development Mechanism (CDM)--an international carbon trade program, and empirically test whether different learning channels lead to cost reduction of wind power. Using pooled cross-sectional data of Chinese CDM wind projects and spatial econometric models, I find that a wind project developer's previous experience (learning-by-doing) and industrywide wind project experience (spillover effect) significantly reduce the costs of wind power. The spillover effect provides justification for subsidizing users of wind technologies so as to offset wind farm investors' incentive to free-ride on knowledge spillovers from other wind energy investors. The CDM has played such a role in China. Most importantly, this essay provides the first empirical evidence of "learning-by-interacting": CDM also drives wind power cost reduction and performance improvement by facilitating technology transfer through collaboration between foreign turbine manufacturers and local wind farm developers. The second essay extends this learning framework to the US wind power sector, where I examine how state energy policies, restructuring of the electricity market, and learning among actors in wind industry lead to

  13. Technology Trends in Mobile Computer Supported Collaborative Learning in Elementary Education from 2009 to 2014

    Science.gov (United States)

    Carapina, Mia; Boticki, Ivica

    2015-01-01

    This paper analyses mobile computer supported collaborative learning in elementary education worldwide focusing on technology trends for the period from 2009 to 2014. The results present representation of device types used to support collaborative activities, their distribution per users (1:1 or 1:m) and if students are learning through or around…

  14. Group Discovery in a CollaborativeTagging System

    OpenAIRE

    Chen, Zijian

    2007-01-01

    Tagging refers to the process of adding metadata to describe things by usingone or several words. Collaborative Tagging systems, which allow different webusers to tag web content like weblogs, pictures, and bookmarks and so on, haverecently gained great popularity on internet. There are already a greatvariety of debates on internet of the advantages and disadvantages ofcollaborative tagging systems from the aspect of information organizing. Inthis paper, we primarily focus on a collaborative ...

  15. Collaborative Learning Framework in Business Management Systems

    Directory of Open Access Journals (Sweden)

    Vladimir GRIGORE

    2008-01-01

    Full Text Available This paper presents a solution based on collaboration with experts and practitioner from university and ERP companies involved in process learning by training and learning by working. The solution uses CPI test to establish proper team for framework modules: Real-Time Chat Room, Discussion Forum, E-mail Support and Learning through Training. We define novice, practitioner and expert competence level based on CORONET train methodology. ERP companies have own roles for mentoring services to knowledge workers and evaluate the performance of learning process with teachers’ cooperation in learning by teaching and learning by working module.

  16. Examination of Studies on Technology-Assisted Collaborative Learning Published between 2010-2014

    Science.gov (United States)

    Arnavut, Ahmet; Özdamli, Fezile

    2016-01-01

    This study is a content analysis of the articles about technology-assisted collaborative learning published in Science Direct database between the years of 2010 and 2014. Developing technology has become a topic that we encounter in every aspect of our lives. Educators deal with the contribution and integration of technology into education.…

  17. Impact of Collaborative Work on Technology Acceptance: A Case Study from Virtual Computing

    Science.gov (United States)

    Konak, Abdullah; Kulturel-Konak, Sadan; Nasereddin, Mahdi; Bartolacci, Michael R.

    2017-01-01

    Aim/Purpose: This paper utilizes the Technology Acceptance Model (TAM) to examine the extent to which acceptance of Remote Virtual Computer Laboratories (RVCLs) is affected by students' technological backgrounds and the role of collaborative work. Background: RVCLs are widely used in information technology and cyber security education to provide…

  18. Discover collaboration: Collaborative learning from the implementation of a discovery system

    Directory of Open Access Journals (Sweden)

    Åsa Forsberg

    2013-12-01

    Full Text Available Background Lund University Library purchased and implemented a new discovery system in the end of 2011 and the beginning of 2012. Historically there has been no collaboration between the digital library unit and the pedagogical unit at the University Library. The conditions for the implementation were quite difficult; an extremely tight time frame, changes of the member of staff, high demands from the library network, a bad relation with current system supplier, a dependency of the current system and its functionalities. What to do? In order to reach trustworthiness and to make sure that we have a learning perspective in all the processes we initiated a close collaboration between the digital unit and the pedagogical unit and formed an implementation group. We also initiated a close and active collaboration between the implementation group and an expert group formed by members from the faculty libraries i.e. the super user group. Activities We had four workshops about pedagogical issues regarding discovery systems. The workshops turned out to be a forum for a dialogue between the digital library, the pedagogical unit and the teacher librarians. They resulted in an action plan which was integrated in the implementation process. We also invited colleagues to informal discussions about the pedagogical use of the discovery system. We encouraged all teaching librarians to share their educational materials on our intranet. Conclusion We found the collaborative strategy fruitful and not only did it result in a closer collaboration between the digital library and the pedagogical unit but also with the library network. Due to several reasons we conducted a new tender of a discovery system during 2012. The tender resulted in a new system with a different supplier. In the implementation started in the autumn 2012, we implemented the experiences and learnings gained by our previous implementation.

  19. Federal Laboratory Consortium Recognizes Unituxin Collaborators with Excellence in Technology Transfer Awards | Poster

    Science.gov (United States)

    The Federal Laboratory Consortium (FLC) presented an Excellence in Technology Transfer award to the group that collaborated to bring Unituxin (dinutuximab, also known as ch14.18), an immunotherapy for neuroblastoma, to licensure.

  20. Collaboration Technology for Education of the Young People with Special Needs

    NARCIS (Netherlands)

    Lavendels, Jurijs; Sitikovs, Vjaceslavs; Latisheva, Eleonora

    2006-01-01

    Please, cite this publication as: Lavendels, J., Sitikovs, V., & Latisheva, E. (2006). Collaboration Technology for Education of the Young People with Special Needs. Proceedings of International Workshop in Learning Networks for Lifelong Competence Development, TENCompetence Conference. March

  1. A study on intensifying efficiency for international collaborative development of advanced nuclear energy technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, J. H.; Hahn, D. H.; Song, K. C.; Chang, J. H.; Kim, H. J.; Kim, H. J.; Lim, C. Y.; Lee, D. S.; Lee, Y. J. [KAERI, Daejeon (Korea, Republic of)

    2011-03-15

    The objective of the study was to participate the GIF for the efficient propulsion of future nuclear system development. For achieving the objective of this study, the followings were carried out. {Omicron} Analyze the international/domestic trends in the future nuclear energy system {Omicron} Analyze the domestic long-term R and D program for the future nuclear system and assist its implementation - Review the agenda of the executive committee, the technical committee, and sub-technical committee - Assist the committee meetings and workshops related to the future nuclear energy system {Omicron} Develop the participation strategy for the collaborative development of Gen-IV technology and conducting the international cooperation activities - Support the delegation by reviewing the agenda of GIF meetings in the technical and legal perspective - Research the system R and D arrangement and report its progress - Participate in the SFR SIA PA negotiation meeting and report its progress {Omicron} Support the activities related to I-NERI between Korea and U.S. - Support a delegation by reviewing the agenda in the technical/legal point of view - Participate in the BINERIC meetings and Support the related activities The result of this study may be used for 1) contribution to establishing the effective foundation and broadening the cooperation activities between the advanced countries and Korea and 2) contribution effective management of Gen IV international collaboration by technical/legal supporting

  2. A study on intensifying efficiency for international collaborative development of advanced nuclear energy technology

    International Nuclear Information System (INIS)

    Lee, J. H.; Hahn, D. H.; Song, K. C.; Chang, J. H.; Kim, H. J.; Kim, H. J.; Lim, C. Y.; Lee, D. S.; Lee, Y. J.

    2011-03-01

    The objective of the study was to participate the GIF for the efficient propulsion of future nuclear system development. For achieving the objective of this study, the followings were carried out. Ο Analyze the international/domestic trends in the future nuclear energy system Ο Analyze the domestic long-term R and D program for the future nuclear system and assist its implementation - Review the agenda of the executive committee, the technical committee, and sub-technical committee - Assist the committee meetings and workshops related to the future nuclear energy system Ο Develop the participation strategy for the collaborative development of Gen-IV technology and conducting the international cooperation activities - Support the delegation by reviewing the agenda of GIF meetings in the technical and legal perspective - Research the system R and D arrangement and report its progress - Participate in the SFR SIA PA negotiation meeting and report its progress Ο Support the activities related to I-NERI between Korea and U.S. - Support a delegation by reviewing the agenda in the technical/legal point of view - Participate in the BINERIC meetings and Support the related activities The result of this study may be used for 1) contribution to establishing the effective foundation and broadening the cooperation activities between the advanced countries and Korea and 2) contribution effective management of Gen IV international collaboration by technical/legal supporting

  3. Context-Aware Mobile Collaborative Systems: Conceptual Modeling and Case Study

    Directory of Open Access Journals (Sweden)

    Luis G. Montané-Jiménez

    2012-10-01

    Full Text Available A Mobile Collaborative System (MCOS enable the cooperation of the members of a team to achieve a common goal by using a combination of mobile and fixed technologies. MCOS can be enhanced if the context of the group of users is considered in the execution of activities. This paper proposes a novel model for Context-Aware Mobile COllaborative Systems (CAMCOS and a functional architecture based on that model. In order to validate both the model and the architecture, a prototype system in the tourism domain was implemented and evaluated.

  4. Sensitivity analysis of synergistic collaborative scenarios towards sustainable nuclear energy systems

    International Nuclear Information System (INIS)

    Fesenko, G.; Kuznetsov, V.; Poplavskaya, E.

    2013-01-01

    The paper presents results of the study on the role of collaboration among countries towards sustainable global nuclear energy systems. The study explores various market shares for nuclear fuel cycle services, possible scale of collaboration among countries and assesses benefits and issues relevant for collaboration between suppliers and users of nuclear fuel cycle services. The approach used in the study is based on a heterogeneous world model with grouping of the non-personified nuclear energy countries according to different nuclear fuel cycle policies. The methodology applied in the analysis allocates a fraction of future global nuclear energy generation to each of such country-groups as a function of time. The sensitivity studies performed show the impacts of the group shares on the scope of collaboration among countries and on the resulting possible reactor mix and nuclear fuel cycle infrastructure versus time. The study quantitatively demonstrates that the synergistic approach to nuclear fuel cycle has a significant potential for offering a win-win collaborative strategy to both, technology holders and technology users on their joint way to future sustainable nuclear energy systems. The study also highlights possible issues on such a collaborative way. (authors)

  5. Examination of studies on technology-assisted collaborative learning published between 2010-2014

    Directory of Open Access Journals (Sweden)

    Ahmet Arnavut

    2016-09-01

    Full Text Available Abstract This study is a content analysis of the articles about technology-assisted collaborative learning published in Science Direct database between the years of 2010 and 2014. Developing technology has become a topic that we encounter in every aspect of our lives. Educators deal with the contribution and integration of technology into education. Therefore, in this study it was aimed to examine how integration of collaborative learning into technology would contribute to education or it would contribute to education or not. According to the results of the studies obtained from Science Direct database, there are many research related with technology-assisted collaborative learning. However, since all of the studies did not fulfill our search criteria for content analysis, a total number of 58 articles published between the years of 2010 and 2014 were used in this study.

  6. The Power of Collaboration for Improving Safety in Complex Systems

    International Nuclear Information System (INIS)

    Hart, C. A.

    2016-01-01

    Many potentially hazardous industries involve systems that consist of a complex array of subsystems that must work together effectively in order for the entire system to perform. Often the subsystems are coupled, such that changes in any one subsystem can affect other subsystems. “System Think” refers to an awareness of the impacts throughout a system of changes in any subsystem. The U.S. commercial aviation industry, in its continuing endeavor to improve safety, uses a collaborative approach to accomplish System Think— bringing all of the key parts of the industry together to work in a collaborative manner to identify and address potential safety concerns. The collaborative approach resulted in an 83% reduction in the fatal accident rate in only 10 years. It also demonstrated that, contrary to conventional wisdom that safety improvements usually hurt productivity, safety improvements that result from a collaborative approach can simultaneously improve productivity. Last but not least, it minimised one of the continuing challenges of making changes in complex systems, which is unintended consequences. The purpose of this presentation is to describe the collaborative approach and to discuss its transferability to other potentially hazardous industries that are seeking to manage their risks more efficiently and effectively. (author)

  7. Comparative, collaborative, and integrative risk governance for emerging technologies

    OpenAIRE

    LINKOV IGOR; TRUMP BENJAMIN D.; ANKLAM ELKE; BERBUBE DAVID; BOISSEAU PATRICK; CUMMINGS CHRISTOPHER; FERSON SCOTT; FLORIN MARIE-VALENTINE; GOLDSTEIN BERNARD; HRISTOZOV DANAIL; JENSEN KELD ASTRUP; KATALAGARIANAKIS GEORGIOS; KUZMA JENNIFER; LAMBERT JAMES H.; MALLOY TIMOTHY

    2018-01-01

    Various emerging technologies challenge existing governance processes to identify, assess, and manage risk. Though the existing risk-based paradigm has been essential for assessment of many chemical, biological, radiological, and nuclear technologies, a complementary approach may be warranted for the early-stage assessment and management challenges of high uncertainty technologies ranging from nanotechnology to synthetic biology to artificial intelligence, among many others. This ...

  8. The Solenoidal Detector Collaboration silicon detector system

    International Nuclear Information System (INIS)

    Ziock, H.J.; Gamble, M.T.; Miller, W.O.; Palounek, A.P.T.; Thompson, T.C.

    1992-01-01

    Silicon tracking systems will be fundamental components of the tracking systems for both planned major SSC experiments. Despite its seemingly small size, it occupies a volume of more than 5 meters in length and 1 meter in diameter and is an order of magnitude larger than any silicon detector system previously built. This report discusses its design and operation

  9. Research on Product Digital Collaborative Design System

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Network economy had changed manufacturing environme nt at all. Open global market offer more choice to customer, and it become changea ble and unpredictable as consumers' needs become more and more characteristic an d diversified. Various new technology coming forth and application accelerate th e rapid change of the market. The manufacturing enterprises were compelled t o change their strategy by the variability of the market, and time has been put to the all-important place. There is a need driven by ...

  10. Value Systems Alignment Analysis in Collaborative Networked Organizations Management

    Directory of Open Access Journals (Sweden)

    Patricia Macedo

    2017-11-01

    Full Text Available The assessment of value systems alignment can play an important role in the formation and evolution of collaborative networks, contributing to reduce potential risks of collaboration. For this purpose, an assessment tool is proposed as part of a collaborative networks information system, supporting both the formation and evolution of long-term strategic alliances and goal-oriented networks. An implementation approach for value system alignment analysis is described, which is intended to assist managers in virtual and networked organizations management. The implementation of the assessment and analysis methods is supported by a set of software services integrated in the information system that supports the management of the networked organizations. A case study in the solar energy sector was conducted, and the data collected through this study allow us to confirm the practical applicability of the proposed methods and the software services.

  11. U.S. Collaborative-Engagement with China: Using Strategic Technological Collaborative Leadership (STCL)

    Science.gov (United States)

    2008-03-01

    Red Rock Tech., Seagate, Sony Storage Devices Lantronix, SBE Terminal Server Technologies Table 1. COTS Suppliers and Components in the Aegis...million Singapore $711 China $622 Australia $471 Taiwan $363 Malaysia $301 South Korea $246 74

  12. Technology fundamentals: photovoltaic systems

    International Nuclear Information System (INIS)

    Quaschning, V.

    2006-01-01

    The generation of electric power from photovoltaic systems is described in detail. The mechanism of operation of solar cells is described in terms of photons, electrons, charge carriers and charge separation. The various cells, modules, technical terms and related technology are discussed. The chemical elements used in solar cells are mentioned and the manufacturing processes described. The technical advantages of the newer thin-film modules over the traditional silicon cells are given but at present manufacturing cost is limiting their production. Both stand-alone and grid-connected PV systems are described. The potential market for PV systems is discussed. It is suggested that PV could eventually meet the total global electric power demand. (author)

  13. Virtual team learning: The role of collaboration process and technology affordance in team decision making

    Directory of Open Access Journals (Sweden)

    Sean Cordes

    2016-12-01

    Full Text Available The study examines two dimensions that impact virtual team decision making. One is the influence of collaboration process structure: the sequences, patterns, and routines participants use to interact and solve problems. The other is technology affordance: the strengths and weaknesses of technologies in terms of the usefulness they offer to teams when performing tasks. Some teams used a structured collaboration process with monitoring, coordination, and backup functions during a decision-making discussion. Other teams had no discussion process instructions. In addition, some teams possessed stronger technology affordance including both chat and an editable document. Other teams used chat technology alone, which offered fewer collaboration possibilities. The collaboration process and technology affordance factors were tested in an experiment in which four-person online teams worked as a personnel hiring committee. Information about four job candidates was distributed to create a hidden profile in which some information was shared across all team members, while other information was visible only to specific members. Two hundred and eight students, comprising fifty-two teams completed the study. Teams using the structured collaboration process made more accurate and higher-quality decisions. In addition, scores were higher when technology affordance included both chat and editable document tools, but this influence was not significant.

  14. Impact of information and communication technology on interprofessional collaboration for chronic disease management: a systematic review.

    Science.gov (United States)

    Barr, Neil; Vania, Diana; Randall, Glen; Mulvale, Gillian

    2017-01-01

    Objectives Information and communication technology is often lauded as the key to enhancing communication among health care providers. However, its impact on interprofessional collaboration is unclear. The objective of this study was to determine the extent to which it improves communication and, subsequently, enhances interprofessional collaboration in chronic disease management. Methods A systematic review of academic literature using two electronic platforms: HealthSTAR and Web of Science (core collection and MEDLINE). To be eligible for inclusion in the review, articles needed to be peer-reviewed; accessible in English and focused on how technology supports, or might support, collaboration (through enhanced communication) in chronic disease management. Studies were assessed for quality and a narrative synthesis conducted. Results The searches identified 289 articles of which six were included in the final analysis (three used qualitative methods, two were descriptive and one used mixed methods). Various forms of information and communication technology were described including electronic health records, online communities/learning resources and telehealth/telecare. Three themes emerged from the studies that may provide insights into how communication that facilitates collaboration in chronic disease management might be enhanced: professional conflict, collective engagement and continuous learning. Conclusions The success of technology in enhancing collaboration for chronic disease management depends upon supporting the social relationships and organization in which the technology will be placed. Decision-makers should take into account and work toward balancing the impact of technology together with the professional and cultural characteristics of health care teams.

  15. A Study on planning of promotion for international collaborative development of Generation IV Nuclear Energy Systems

    International Nuclear Information System (INIS)

    Hee, Chang Moon; Yang, M. S.; Ha, J. J.

    2006-06-01

    Korea has participated in the international collaboration programs for the development of future nuclear energy systems driven by the countries holding advanced nuclear technology and Korea and U. S. have cooperated in the INERI. This study is mainly at developing the plan for participation in the collaborative development of the Gen IV, searching the participation strategy for INERI and the INPRO, and the international cooperation in these programs. Contents and scope of the study for successful achievement are as follows; - Investigation and analysis of international and domestic trends related to advanced nuclear technologies - Development of the plan for collaborative development of the Gen IV and conducting the international cooperation activities - Support for the activities related to I-NERI between Korea and U. S. and conducting the international cooperation - International cooperation activities for the INPRO This study can be useful for planning the research plan and setting up of the strategy of integrating the results of the international collaboration and the domestic R and D results by combining the Gen IV and the domestic R and D in the field of future nuclear technology. Furthermore, this study can contribute to establishing the effective foundation and broadening the cooperation activities not only with the advanced countries for acquisition of the advanced technologies but also with the developing countries for the export of the domestic nuclear energy systems

  16. Efficiency of the supply chain collaborative technological innovation in China: An empirical study based on DEA analysis

    Directory of Open Access Journals (Sweden)

    Huaping Zhang

    2015-11-01

    Full Text Available Purpose: This paper is an attempt to investigate the current issues and development of the supply chain collaborative technological innovation in China. Design/methodology/approach: DEA is employed to measure the efficiency of the supply chain collaborative technological innovation. Findings: From the results of this research, we can get the conclusion that there are big spaces for improvement for the selected companies in terms of supply chain collaborative technological innovation, especially in the collaborative benefit aspect. The efficiencies of the supply chain collaborative technological innovation in the selected companies vary a lot. Research limitations: More industries are needed to generalize the conclusions. Practical implications: Our practical recommendations for improving supply chain companies in terms of improving their collaborative technological innovation efficiency are: (1 expanding the cooperative scope; (2 optimizing the collaboration operations; (3 improving the compactness in supply chain; (4 increasing the innovation input; and (5 improving the knowledge exchange capacity. Originality/value: The evaluation and the measure of the efficiency of performance of the collaborative technological innovation both in theory and in practice have been proven to be very important and quite complex, and there have been limited researches in the current literature. From observations, however, the efficiency of supply chain collaborative technological innovation is relatively low. This research investigates the current issues and development of the supply chain collaborative technological innovation in China, and provides the guideline in terms of improving the efficiency of supply chain collaborative technological innovation.

  17. Harbin Institute of Technology collaborative base project at APS of Argonne

    Science.gov (United States)

    Liu, H.; Liu, L. L.

    2013-05-01

    In this paper, the progress of Harbin Institute of Technology (HIT) collaborative base project, which was launched at Argonne National Laboratory in 2010, will be presented. The staff and students from HIT involved in advanced technological developments, which included tomography, high energy PDF, diffraction and scattering, and inelastic scattering techniques in APS to study structures changes of minerals and materials under high pressure conditions.

  18. How Technology and Collaboration Promote Formative Feedback: A Role for CSCL Research in Active Learning Interventions

    Science.gov (United States)

    Wu, Sally P. W.; Rau, Martina A.

    2017-01-01

    Recent evidence for the effectiveness of active learning interventions has led educators to advocate for widespread adoption of active learning in undergraduate science, technology, engineering, and mathematics courses. Active learning interventions implement technology and collaboration to engage students actively with the content. Yet, it is…

  19. Assessment of Collaboration and Interoperability in an Information Management System to Support Bioscience Research

    Science.gov (United States)

    Myneni, Sahiti; Patel, Vimla L.

    2009-01-01

    Biomedical researchers often have to work on massive, detailed, and heterogeneous datasets that raise new challenges of information management. This study reports an investigation into the nature of the problems faced by the researchers in two bioscience test laboratories when dealing with their data management applications. Data were collected using ethnographic observations, questionnaires, and semi-structured interviews. The major problems identified in working with these systems were related to data organization, publications, and collaboration. The interoperability standards were analyzed using a C4I framework at the level of connection, communication, consolidation, and collaboration. Such an analysis was found to be useful in judging the capabilities of data management systems at different levels of technological competency. While collaboration and system interoperability are the “must have” attributes of these biomedical scientific laboratory information management applications, usability and human interoperability are the other design concerns that must also be addressed for easy use and implementation. PMID:20351900

  20. Electronic construction collaboration system -- phase II.

    Science.gov (United States)

    2010-06-01

    During the first year of research, work was completed to identify Iowa DOT needs for web-based project management system (WPMS) : and evaluate how commercially available solutions could meet these needs. Researchers also worked to pilot test custom d...

  1. The Circle of Prosperity: Tribal Colleges, Tradition, and Technology -- Building Synergistic Cross-Community Collaborations

    Science.gov (United States)

    Billy, C. L.

    2003-12-01

    For more than three decades, American Indian Tribal Colleges and Universities have been working to sustain what is ours: our land, our language, our communities, and our culture. Tribal Colleges have achieved success by helping our communities, located in some of the poorest and most geographically remote areas of the country, develop systems for higher education, research, and economic development that are accessible, culturally responsive, and place-based. American Indian higher education is holistic, focused on the mind, body, spirit, and family. Research is respectful of culture, mindful of community values, and essential to community well-being. Economic development strategies are based on national and international trends, but focused on relationships between local people and their land. In this environment, applied research flourishes and new knowledge, integrating traditional ways of knowing with western science, is created and used. In the 1990s, the American Indian Higher Education Consortium, which is composed of 35 Tribal Colleges and Universities in the U.S. and Canada, launched a major initiative to expand and enhance this capacity through new collaborations and state-of-the-art information and communications technologies. Through a multi-phase effort, the Tribal Colleges developed and are currently implementing a dynamic and broad-based strategic plan. The goal: to reach a "Circle of Prosperity," a place where tribal traditions and new technologies are woven together to build stronger and more sustainable communities through enhanced STEM education and research programs. Our plan, the "Tribal College Framework for Community Technology," is a framework of strategic partnerships, resources, and tools that is helping us create locally based economic and social opportunities through information and communications technology and use of the Internet. During this presentation, we will: (a) discuss the innovative collaborative process we are using to build

  2. Using Collaborative Technology in CS Education to facilitate Cross-Site Software Development

    Directory of Open Access Journals (Sweden)

    Marie Devlin

    2008-12-01

    Full Text Available With offshore computing becoming more prevalent, it is essential that we increase our students' employability by providing new and relevant experiences in software development and project management; giving them valuable skills that are essential in an ever-increasing and changing global market. What is new about the work we discuss here is how collaborative technologies have facilitated a year-long cross-site software engineering project between Durham University and Newcastle University students. Our use of various collaboration technologies such as online discussion forums, video-conferencing, company repositories, version control software etc., as part of the collaborative team project has not only encouraged students to develop technical 'transferable' skills but also gain an understanding, through realistic experiences, of how the use of these technologies involves more than just learning their technical aspects and operation, but that it is essential to develop and implement the soft processes and skills required to use them successfully and effectively and hence optimize their cross-site working partnerships and productivity. In this paper we describe the project, the technologies employed by the student teams and the results and anecdotal evidence of staff and students that show the successes and, it must be admitted, occasional failures of this work. We discuss how we have tried to manage the expectations of the students throughout the project, how the technologies we have provided have affected the students' experience of cross-site collaboration and the impact of crosssite collaboration on our assessment strategies and curriculum design.

  3. 3D medical collaboration technology to enhance emergency healthcare

    DEFF Research Database (Denmark)

    Welch, Gregory F; Sonnenwald, Diane H.; Fuchs, Henry

    2009-01-01

    Two-dimensional (2D) videoconferencing has been explored widely in the past 15-20 years to support collaboration in healthcare. Two issues that arise in most evaluations of 2D videoconferencing in telemedicine are the difficulty obtaining optimal camera views and poor depth perception. To address...... these problems, we are exploring the use of a small array of cameras to reconstruct dynamic three-dimensional (3D) views of a remote environment and of events taking place within. The 3D views could be sent across wired or wireless networks to remote healthcare professionals equipped with fixed displays...... or with mobile devices such as personal digital assistants (PDAs). The remote professionals' viewpoints could be specified manually or automatically (continuously) via user head or PDA tracking, giving the remote viewers head-slaved or hand-slaved virtual cameras for monoscopic or stereoscopic viewing...

  4. Healthcare technology: physician collaboration in reducing the surgical cost.

    Science.gov (United States)

    Olson, Steven A; Obremskey, William T; Bozic, Kevin J

    2013-06-01

    The increasing cost of providing health care is a national concern. Healthcare spending related to providing hospital care is one of the primary drivers of healthcare spending in the United States. Adoption of advanced medical technologies accounts for the largest percentage of growth in healthcare spending in the United States when compared with other developed countries. Within the specialty of orthopaedic surgery, a variety of implants can result in similar outcomes for patients in several areas of clinical care. However, surgeons often do not know the cost of implants used in a specific procedure or how the use of an implant or technology affects the overall cost of the episode of care. The purposes of this study were (1) to describe physician-led processes for introduction of new surgical products and technologies; and (2) to inform physicians of potential cost savings of physician-led product contract negotiations and approval of new technology. We performed a detailed review of the steps taken by two centers that have implemented surgeon-led programs to demonstrate responsibility in technology acquisition and product procurement decision-making. Each program has developed a physician peer review process in technology and new product acquisition that has resulted in a substantial reduction in spending for the respective hospitals in regard to surgical implants. Implant costs have decreased between 3% and 38% using different negotiating strategies. At the same time, new product requests by physicians have been approved in greater than 90% of instances. Hospitals need physicians to be engaged and informed in discussions concerning current and new technology and products. Surgeons can provide leadership for these efforts to reduce the cost of high-quality care.

  5. Signing of a collaboration agreement between Norwegian University of Science and Technology (NTNU) and CERN

    CERN Multimedia

    AUTHOR|(CDS)2099575

    2017-01-01

    Pro-Rector for Innovation Toril A. Nagelhus Hernes, NTNU, and Director for Accelerators and Technology Frédérick Bordry, CERN, signed on the 19th October 2017 a collaboration agreement between their respective institutions. NTNU and CERN have worked closely together for many years already. With this agreement in place, the collaboration and exchange between the two institutions is expected to become even tighter.

  6. Linking Effectively: Learning Lessons from Successful Collaboration in Science and Technology

    National Research Council Canada - National Science Library

    Wagner, Caroline S

    2002-01-01

    .... It is presented in a format that draws lessons from the case studies and then presents key questions that emerged from the cases that can serve as a guide to others seeking to formulate similar collaborative programs. The first section discusses the growing role that international collaboration is playing in science and technology (S&T). Here we also discuss the case study methodology used for this study. The second section presents a framework of.

  7. Implementation of a Recommender System using Collaborative Filtering

    Directory of Open Access Journals (Sweden)

    Andrei-Cristian Prodan

    2010-12-01

    Full Text Available Nowadays, consumers have a lot of choices. Electronic retailers offer a great variety of products. Because of this, there is a need for Recommender Systems. These systems aim to solve the problem of matching consumers with the most appealing products for them. They do this by analyzing either the products information details (Content Based methods or users social behavior (Collaborative Filtering. This paper describes the Collaborative Filtering technique in more detail. It then presents one of the best methods for CF: the Matrix Factorization technique. Next, it presents two algorithms used for matrix factorization. Then, the paper describes the implementation details of a framework created by us, called Rho, that uses Collaborative Filtering. In the end, we present some results obtained after experimenting with this framework.

  8. Informatics technology mimics ecology: dense, mutualistic collaboration networks are associated with higher publication rates.

    Directory of Open Access Journals (Sweden)

    Marco D Sorani

    Full Text Available Information technology (IT adoption enables biomedical research. Publications are an accepted measure of research output, and network models can describe the collaborative nature of publication. In particular, ecological networks can serve as analogies for publication and technology adoption. We constructed network models of adoption of bioinformatics programming languages and health IT (HIT from the literature.We selected seven programming languages and four types of HIT. We performed PubMed searches to identify publications since 2001. We calculated summary statistics and analyzed spatiotemporal relationships. Then, we assessed ecological models of specialization, cooperativity, competition, evolution, biodiversity, and stability associated with publications.Adoption of HIT has been variable, while scripting languages have experienced rapid adoption. Hospital systems had the largest HIT research corpus, while Perl had the largest language corpus. Scripting languages represented the largest connected network components. The relationship between edges and nodes was linear, though Bioconductor had more edges than expected and Perl had fewer. Spatiotemporal relationships were weak. Most languages shared a bioinformatics specialization and appeared mutualistic or competitive. HIT specializations varied. Specialization was highest for Bioconductor and radiology systems. Specialization and cooperativity were positively correlated among languages but negatively correlated among HIT. Rates of language evolution were similar. Biodiversity among languages grew in the first half of the decade and stabilized, while diversity among HIT was variable but flat. Compared with publications in 2001, correlation with publications one year later was positive while correlation after ten years was weak and negative.Adoption of new technologies can be unpredictable. Spatiotemporal relationships facilitate adoption but are not sufficient. As with ecosystems, dense

  9. Informatics technology mimics ecology: dense, mutualistic collaboration networks are associated with higher publication rates.

    Science.gov (United States)

    Sorani, Marco D

    2012-01-01

    Information technology (IT) adoption enables biomedical research. Publications are an accepted measure of research output, and network models can describe the collaborative nature of publication. In particular, ecological networks can serve as analogies for publication and technology adoption. We constructed network models of adoption of bioinformatics programming languages and health IT (HIT) from the literature.We selected seven programming languages and four types of HIT. We performed PubMed searches to identify publications since 2001. We calculated summary statistics and analyzed spatiotemporal relationships. Then, we assessed ecological models of specialization, cooperativity, competition, evolution, biodiversity, and stability associated with publications.Adoption of HIT has been variable, while scripting languages have experienced rapid adoption. Hospital systems had the largest HIT research corpus, while Perl had the largest language corpus. Scripting languages represented the largest connected network components. The relationship between edges and nodes was linear, though Bioconductor had more edges than expected and Perl had fewer. Spatiotemporal relationships were weak. Most languages shared a bioinformatics specialization and appeared mutualistic or competitive. HIT specializations varied. Specialization was highest for Bioconductor and radiology systems. Specialization and cooperativity were positively correlated among languages but negatively correlated among HIT. Rates of language evolution were similar. Biodiversity among languages grew in the first half of the decade and stabilized, while diversity among HIT was variable but flat. Compared with publications in 2001, correlation with publications one year later was positive while correlation after ten years was weak and negative.Adoption of new technologies can be unpredictable. Spatiotemporal relationships facilitate adoption but are not sufficient. As with ecosystems, dense, mutualistic

  10. Collaborative Affordances of Hybrid Patient Record Technologies in Medical Work

    DEFF Research Database (Denmark)

    Houben, Steven; Frost, Mads; Bardram, Jakob E

    2015-01-01

    explored the integration of paper and digital technology, there are still a wide range of open issues in the design of technologies that integrate digital and paper-based medical records. This paper studies the use of one such novel technology, called the Hybrid Patient Record (HyPR), that is designed......The medical record is a central artifact used to organize, communicate and coordinate information related to patient care. Despite recent deployments of electronic health records (EHR), paper medical records are still widely used because of the affordances of paper. Although a number of approaches...... to digitally augment a paper medical record. We report on two studies: a field study in which we describe the benefits and challenges of using a combination of electronic and paper-based medical records in a large university hospital and a deployment study in which we analyze how 8 clinicians used the Hy...

  11. Exploring gender differences in perceptions of 3D telepresence collaboration technology

    DEFF Research Database (Denmark)

    Maurin, Hanna; Sonnenwald, Diane H.; Cairns, Bruce

    2006-01-01

    Previous research on gender differences and collaboration technology illustrate the need to investigate gender issues as early as possible in the development cycle in order to avoid any negative consequences the technology may impose. Therefore we are investigating the potential of 3D telepresence....... The results show several gender differences that imply male paramedics may inherently receive more benefits from use of the 3D telepresence technology than female paramedics....

  12. Towards mHealth Systems for Support of Psychotherapeutic Practice: A Qualitative Study of Researcher-Clinician Collaboration in System Design and Evaluation

    Directory of Open Access Journals (Sweden)

    Karin Halje

    2016-01-01

    Full Text Available We examined clinicians’ and researchers’ experiences from participation in collaborative research on the introduction of Internet and mobile information systems (mHealth systems in psychotherapeutic routines. The study used grounded theory methodology and was set in a collaboration that aimed to develop and evaluate mHealth support of psychotherapy provided to young people. Soundness of the central objects developed in the design phase (the collaboration contract, the trial protocol, and the system technology was a necessary foundation for successful collaborative mHealth research; neglect of unanticipated organizational influences during the trial phase was a factor in collaboration failure. The experiences gained in this study can be used in settings where collaborative research on mHealth systems in mental health is planned.

  13. Collaboration between SCK·CEN and JAEA for partitioning and transmutation through accelerator-driven system

    International Nuclear Information System (INIS)

    2017-03-01

    This technical report reviews Research and Development (R and D) programs for the Partitioning and Transmutation (P and T) technology through Accelerator-Driven System (ADS) at Studiecentrum voor Kernenergie/Centre d'Etude de l'Énergie Nucléaire (SCK·CEN) and Japan Atomic Energy Agency (JAEA). The results obtained in the present Collaboration Arrangement between the two organizations for the ADS are also summarized, and possible further collaborations and mutual realizations in the future are sketched. (author)

  14. Student Affairs and Information Technology: Collaborating in the Cloud

    Science.gov (United States)

    Barbatis, Peter Reyes

    2014-01-01

    Student affairs and information technology have opportunities to partner in order to increase student satisfaction and retention rates and to assist institutions to comply with federal educational regulations. This chapter contains four examples of emerging best practices and future initiatives including: (a) the admissions pipeline, (b)…

  15. NASA Centers and Universities Collaborate Through Smallsat Technology Partnerships

    Science.gov (United States)

    Cockrell, James

    2018-01-01

    The Small Spacecraft Technology (SST) Program within the NASA Space Technology Mission Directorate is chartered develop and demonstrate the capabilities that enable small spacecraft to achieve science and exploration missions in "unique" and "more affordable" ways. Specifically, the SST program seeks to enable new mission architectures through the use of small spacecraft, to expand the reach of small spacecraft to new destinations, and to make possible the augmentation existing assets and future missions with supporting small spacecraft. The SST program sponsors smallsat technology development partnerships between universities and NASA Centers in order to engage the unique talents and fresh perspectives of the university community and to share NASA experience and expertise in relevant university projects to develop new technologies and capabilities for small spacecraft. These partnerships also engage NASA personnel in the rapid, agile and cost-conscious small spacecraft approaches that have evolved in the university community, as well as increase support to university efforts and foster a new generation of innovators for NASA and the nation.

  16. ACTT Now: A Collaboration Reshaping Teacher Technology Training.

    Science.gov (United States)

    Curry-Corcoran, Daniel E.; O'Shea, Patrick M.

    2003-01-01

    Describes the ACTT Now (Aligning Certification with Technology Training) project in Brunswick County Public Schools (Virginia) that, in partnership with Old Dominion University (Norfolk, VA), has created a Field-Based Master's Program to help overcome the disadvantages of a small, rural district in providing teacher training for technology…

  17. Advanced Operating System Technologies

    Science.gov (United States)

    Cittolin, Sergio; Riccardi, Fabio; Vascotto, Sandro

    . Our work started in the second half of 1994, with a research agreement between CERN and Chorus Systemes (France), world leader in the micro-kernel OS technology. The Chorus OS is targeted to distributed real-time applications, and it can very efficiently support different "OS personalities" in the same environment, like Posix, UNIX, and a CORBA compliant distributed object architecture. Projects are being set-up to verify the suitability of our work for LHC applications, we are building a scaled-down prototype of the DAQ system foreseen for the CMS experiment at LHC, where we will directly test our protocols and where we will be able to make measurements and benchmarks, guiding our development and allowing us to build an analytical model of the system, suitable for simulation and large scale verification.

  18. COLLABORATIVE NETWORK SECURITY MANAGEMENT SYSTEM BASED ON ASSOCIATION MINING RULE

    Directory of Open Access Journals (Sweden)

    Nisha Mariam Varughese

    2014-07-01

    Full Text Available Security is one of the major challenges in open network. There are so many types of attacks which follow fixed patterns or frequently change their patterns. It is difficult to find the malicious attack which does not have any fixed patterns. The Distributed Denial of Service (DDoS attacks like Botnets are used to slow down the system performance. To address such problems Collaborative Network Security Management System (CNSMS is proposed along with the association mining rule. CNSMS system is consists of collaborative Unified Threat Management (UTM, cloud based security centre and traffic prober. The traffic prober captures the internet traffic and given to the collaborative UTM. Traffic is analysed by the Collaborative UTM, to determine whether it contains any malicious attack or not. If any security event occurs, it will reports to the cloud based security centre. The security centre generates security rules based on association mining rule and distributes to the network. The cloud based security centre is used to store the huge amount of tragic, their logs and the security rule generated. The feedback is evaluated and the invalid rules are eliminated to improve the system efficiency.

  19. Robust collaborative process interactions under system crash and network failures

    NARCIS (Netherlands)

    Wang, Lei; Wombacher, Andreas; Ferreira Pires, Luis; van Sinderen, Marten J.; Chi, Chihung

    2013-01-01

    With the possibility of system crashes and network failures, the design of robust client/server interactions for collaborative process execution is a challenge. If a business process changes its state, it sends messages to the relevant processes to inform about this change. However, server crashes

  20. Coarse cluster enhancing collaborative recommendation for social network systems

    Science.gov (United States)

    Zhao, Yao-Dong; Cai, Shi-Min; Tang, Ming; Shang, Min-Sheng

    2017-10-01

    Traditional collaborative filtering based recommender systems for social network systems bring very high demands on time complexity due to computing similarities of all pairs of users via resource usages and annotation actions, which thus strongly suppresses recommending speed. In this paper, to overcome this drawback, we propose a novel approach, namely coarse cluster that partitions similar users and associated items at a high speed to enhance user-based collaborative filtering, and then develop a fast collaborative user model for the social tagging systems. The experimental results based on Delicious dataset show that the proposed model is able to dramatically reduce the processing time cost greater than 90 % and relatively improve the accuracy in comparison with the ordinary user-based collaborative filtering, and is robust for the initial parameter. Most importantly, the proposed model can be conveniently extended by introducing more users' information (e.g., profiles) and practically applied for the large-scale social network systems to enhance the recommending speed without accuracy loss.

  1. Collaborate or not? : A system dynamics study on disruption recovery

    NARCIS (Netherlands)

    Zhu, Quan; Krikke, Harold; Caniels, Marjolein C. J.

    2016-01-01

    Purpose – The purpose of this paper is to investigate different combinations of collaboration strategies to deal with different types of supply chain disruptions, find the best combination, and provide targeting suggestions for investments. Design/methodology/approach – A system dynamics simulation

  2. Collaborative Learning in Advanced Supply Systems: The KLASS Pilot Project.

    Science.gov (United States)

    Rhodes, Ed; Carter, Ruth

    2003-01-01

    The Knowledge and Learning in Advanced Supply Systems (KLASS) project developed collaborative learning networks of suppliers in the British automotive and aerospace industries. Methods included face-to-face and distance learning, work toward National Vocational Qualifications, and diagnostic workshops for senior managers on improving quality,…

  3. Curriculum Online Review System: Proposing Curriculum with Collaboration

    Science.gov (United States)

    Rhinehart, Marilyn; Barlow, Rhonda; Shafer, Stu; Hassur, Debby

    2009-01-01

    The Curriculum Online Review System (CORS) at Johnson County Community College (JCCC) uses SharePoint as a Web platform for the JCCC Curriculum Proposals Process. The CORS application manages proposals throughout the approval process using collaboration tools and workflows to notify all stakeholders. This innovative new program has changed the way…

  4. Family Engagement: A Collaborative, Systemic Approach for Middle School Counselors

    Science.gov (United States)

    Davis, Keith M.; Lambie, Glenn W.

    2005-01-01

    Early adolescence is a period of intrapersonal and interpersonal transformation; thus, middle school counselors need to provide services that appropriately match their students' and families' developmental needs. A collaborative, systemic approach is one way that counselors can work with other school-based professionals to support…

  5. Collaborative business modeling for systemic and sustainability innovations

    DEFF Research Database (Denmark)

    Rohrbeck, René; Konnertz, L.; Knab, S.

    2013-01-01

    Sustainability innovations are characterized by a systemic nature, and require that multiple organizations act in an orchestrated fashion. To jointly identify opportunities and plan sustainability innovations, new methods and approaches are needed. In this article we describe a case study where 8...... firms have collaborated to envision and create new business models in the energy industry. After describing this collaborative business modelling (CBM) approach, we discuss its strengths and limitations and compare it to two alternative methods of strategy and innovation planning: scenario technique...

  6. Collaboration Mechanism for Equipment Instruction of Multiple Energy Systems

    Science.gov (United States)

    Wang, Dong; Wang, Tuo; Wang, Qi; Zhang, Zhao; Zhao, Mingyu; Wang, Yinghui

    2018-01-01

    When multiple energy systems execute optimization instructions simultaneously, and the same equipment is Shared, the instruction conflict may occur. Aiming at the above problems, taking into account the control objectives of each system, the characteristics of different systems, such as comprehensive clean energy, energy efficiency, and peak filling, etc., designed the instruction coordination mechanism for the daemon. This mechanism mainly acts on the main station of the system, and form a final optimization instruction. For some specific scenarios, the collaboration mechanism of unlocking the terminal is supplemented. The mechanism determines the specific execution instructions based on the arrival time of the instruction. Finally, the experiment in Tianjin eco-city shows that this algorithm can meet the instruction and collaboration requirements of multi-energy systems, and ensure the safe operation of the equipment.

  7. Collaboration system for simulation using commercial Web3D

    International Nuclear Information System (INIS)

    Okamoto, Koji; Ohkubo, Kohei

    2004-01-01

    The Web-3D system has been widely used in the internet. It can show the 3D environment easily and friendly. In order to develop the network collaboration system, the Web-3D system is used as the front end of the visualization tool. The 3D geometries have been transferred from the server using HTTP with the viewpoint, one of the commercialized Web-3D. The simulation results are directly transferred to the client using the TCP/IP socket with JAVA. The viewpoint can be controlled by the JAVA, so the transferred simulation data are displayed on the web, in real-time. The multi-client system enables the visualization of the real-time simulation results with remote site. The same results are shown on the remote web site, simultaneously. This means the remote collaboration can be achievable for the real-time simulation. Also, the system has the feedback system, which control the simulation parameter remotely. In this prototype system, the key feature of the collaboration system are discussed using the viewpoint as the frontend. (author)

  8. Remote collaboration system based on large scale simulation

    International Nuclear Information System (INIS)

    Kishimoto, Yasuaki; Sugahara, Akihiro; Li, J.Q.

    2008-01-01

    Large scale simulation using super-computer, which generally requires long CPU time and produces large amount of data, has been extensively studied as a third pillar in various advanced science fields in parallel to theory and experiment. Such a simulation is expected to lead new scientific discoveries through elucidation of various complex phenomena, which are hardly identified only by conventional theoretical and experimental approaches. In order to assist such large simulation studies for which many collaborators working at geographically different places participate and contribute, we have developed a unique remote collaboration system, referred to as SIMON (simulation monitoring system), which is based on client-server system control introducing an idea of up-date processing, contrary to that of widely used post-processing. As a key ingredient, we have developed a trigger method, which transmits various requests for the up-date processing from the simulation (client) running on a super-computer to a workstation (server). Namely, the simulation running on a super-computer actively controls the timing of up-date processing. The server that has received the requests from the ongoing simulation such as data transfer, data analyses, and visualizations, etc. starts operations according to the requests during the simulation. The server makes the latest results available to web browsers, so that the collaborators can monitor the results at any place and time in the world. By applying the system to a specific simulation project of laser-matter interaction, we have confirmed that the system works well and plays an important role as a collaboration platform on which many collaborators work with one another

  9. Deployed Virtual Consulting: The Fusion of Wearable Computing, Collaborative Technology, Augmented Reality and Intelligent Agents to Support Fleet Aviation Maintenance

    National Research Council Canada - National Science Library

    Nasman, James

    2004-01-01

    .... By implementing wireless technology in combination with advanced software allowing the virtual collaboration of parties widely separated by geographical distance the Navy can establish a "virUal...

  10. NASA Technology Evaluation for Environmental Risk Mitigation Remediation Technology Collaboration Development

    Science.gov (United States)

    Romeo, James

    2013-01-01

    NASA is committed to finding solutions to agency cleanup problems that are better, cheaper, and more effective than the status quo. Unfortunately, some potential solutions involve innovative technologies for which NASA remediation managers may not have a high level of understanding or confidence. Since 2004, NASA's Stennis Space Center (SSC) in Mississippi has been pumping groundwater contaminated with trichloroethylene (TCE) and other halogenated volatile organic compounds (HVOC) from their cleanup location designated "Area G" through extraction wells to an aboveground treatment system. Over time, however, the effectiveness of this treatment strategy has diminished and an alternative approach is needed. In 2012, professionals from NASA's Principal Center for Technology Evaluation for Environmental Risk Mitigation (TEERM) introduced SSC managers to an innovative technology for enhancing the performance of SSC's existing pump and treat system. The technology, generally referred to as in situ chemical oxidation (ISCO), involves slowly and continuously injecting a strong but safe chemical oxidant into the groundwater. Treatment is enhanced by a "surfactant-type effect" which causes residual contamination from saturated soil to be released into the dissolved-phase where it can be readily oxidized. Any dissolved-phase contamination that was not oxidized can be collected by the extraction well network and treated aboveground. SSC was not familiar with the technology so to increase their confidence, TEERM identified a contractor who was willing to demonstrate their product and process at a significantly reduced price. An initial, small-scale demonstration of ISCO began at sse in March 2012 and completed in August 2012. This successful demonstration was followed by three larger-scale ISCO demonstrations between August and December 2012. The contractor's innovative Continuous Injection System (CIS) incorporated "green" and sustainable technologies and practices. A slow

  11. An Investigation into the Role of Mobile Technology in Collaborative Disease Management for Persons Living with Type 2 Diabetes

    Directory of Open Access Journals (Sweden)

    S. Sultan

    2015-05-01

    Full Text Available Diabetes and other chronic non-communicable diseases represent a leading threat to health care and human development. The authors discusses how mobile technology can achieve collaborative disease management (CDM within a population living with Type 2 diabetes. We introduces a framework for CDM using mobile technologies. While it can be applied to the management of any disease, we describe a specific instance for diabetes peer-support. In this paper, we validate the framework through the development and testing of a Mobile Health initiative called Mobile Diabetes Self-Management Support (DSMS. It allows persons living with diabetes to learn from each others’ experiences through a virtual support group. The paper presents two user studies conducted. The first study captured the participants’ initial perceptions of the application in a controlled environment and the second study investigated system usage and collaboration when the application was used in their personal settings.

  12. Technology-mediated collaborative learning: theoretical contributions based on analysis of educational practice

    Directory of Open Access Journals (Sweden)

    Sonia CASILLAS MARTÍN

    2017-12-01

    Full Text Available Collaborative learning has been a subject of great interest in the context of educational research, giving rise to many studies emphasizing the potential of the collaboration process in student learning, knowledge building, the development of diverse abilities and improved academic performance. Based on a conceptual review and thorough reflection on this topic, this article presents the results of a case study carried out in different schools in the Autonomous Community of Castile y Leon (Spain in an attempt to identify patterns of common action through the implementation of collaborative learning methods mediated by information and communication technologies (ICT. Among the many outcomes of this study, we conclude by highlighting the need to plan collaborative work very carefully, taking advantage of the opportunities offered by ICT as communicative environments where it is possible to construct joint and shared learning. 

  13. Indicators of collaboration in energy innovation systems – what is needed and what is possible?

    DEFF Research Database (Denmark)

    Borup, Mads

    2013-01-01

    Indicator schemes for assessing the performance and dynamics of innovation systems have until now only to a small extent contained indicators of collaboration and interaction in the innovation systems. This is striking, as one of the main points of innovation system research in general...... is that the patterns of interaction constitute a key factor for the resulting innovative performance and strength of an innovation system. Also studies of innovation networks and transition processes towards sustainable energy systems and studies of energy technology development have pointed out the patterns...

  14. Technology for national asset storage systems

    Science.gov (United States)

    Coyne, Robert A.; Hulen, Harry; Watson, Richard

    1993-01-01

    An industry-led collaborative project, called the National Storage Laboratory, was organized to investigate technology for storage systems that will be the future repositories for our national information assets. Industry participants are IBM Federal Systems Company, Ampex Recording Systems Corporation, General Atomics DISCOS Division, IBM ADSTAR, Maximum Strategy Corporation, Network Systems Corporation, and Zitel Corporation. Industry members of the collaborative project are funding their own participation. Lawrence Livermore National Laboratory through its National Energy Research Supercomputer Center (NERSC) will participate in the project as the operational site and the provider of applications. The expected result is an evaluation of a high performance storage architecture assembled from commercially available hardware and software, with some software enhancements to meet the project's goals. It is anticipated that the integrated testbed system will represent a significant advance in the technology for distributed storage systems capable of handling gigabyte class files at gigabit-per-second data rates. The National Storage Laboratory was officially launched on 27 May 1992.

  15. Folksonomies and clustering in the collaborative system CiteULike

    Science.gov (United States)

    Capocci, Andrea; Caldarelli, Guido

    2008-06-01

    We analyze CiteULike, an online collaborative tagging system where users bookmark and annotate scientific papers. Such a system can be naturally represented as a tri-partite graph whose nodes represent papers, users and tags connected by individual tag assignments. The semantics of tags is studied here, in order to uncover the hidden relationships between tags. We find that the clustering coefficient can be used to analyze the semantical patterns among tags.

  16. Folksonomies and clustering in the collaborative system CiteULike

    International Nuclear Information System (INIS)

    Capocci, Andrea; Caldarelli, Guido

    2008-01-01

    We analyze CiteULike, an online collaborative tagging system where users bookmark and annotate scientific papers. Such a system can be naturally represented as a tri-partite graph whose nodes represent papers, users and tags connected by individual tag assignments. The semantics of tags is studied here, in order to uncover the hidden relationships between tags. We find that the clustering coefficient can be used to analyze the semantical patterns among tags

  17. Folksonomies and clustering in the collaborative system CiteULike

    Energy Technology Data Exchange (ETDEWEB)

    Capocci, Andrea [Dip. di Informatica e Sistemistica Universita ' Sapienza' , via Ariosto, 25 00185 Rome (Italy); Caldarelli, Guido [SMC Centre, CNR-INFM, Dip. di Fisica, Universita ' Sapienza' , P.le A. Moro 5, 00185-Rome (Italy)

    2008-06-06

    We analyze CiteULike, an online collaborative tagging system where users bookmark and annotate scientific papers. Such a system can be naturally represented as a tri-partite graph whose nodes represent papers, users and tags connected by individual tag assignments. The semantics of tags is studied here, in order to uncover the hidden relationships between tags. We find that the clustering coefficient can be used to analyze the semantical patterns among tags.

  18. RITD - Re-entry: Inflatable Technology Development in Russian Collaboration

    Science.gov (United States)

    Heilimo, J.; Harri, A.-M.; Aleksashkin, S.; Koryanov, V.; Arruego, I.; Schmidt, W.; Haukka, H.; Finchenko, V.; Martynov, M.; Ostresko, B.; Ponomarenko, A.; Kazakovtsev, V.; Martin, S.; Siili, T.

    2014-04-01

    A new generation of inflatable Entry, Descent and Landing System (EDLS) for Mars has been developed. It is used in both the initial atmospheric entry and atmospheric descent before the semi-hard impact of the penetrator into Martian surface. The EDLS applicability to Earth's atmosphere is studied by the EU/RITD [1] project. Project focuses on the analysis and tests of the transonic behaviour of this compact and light weight payload entry system at the Earth re-entry.

  19. Digital and Collaborative Technologies for Smarter Distance Education

    Directory of Open Access Journals (Sweden)

    OLIVEIRA, E. A

    2014-12-01

    Full Text Available With the integration of web 2.0 and social technologies into educational practices, researchers have been faced with the challenge of providing better online virtual learning environments, that engage students in the learning processes. This challenge entails using the massive amounts of knowledge we generate in our digital footprints to provide personalized learning contents. In our research group, we have tried to tackle this challenge by answering two questions: (i How to share, at the same time, the knowledge of a virtual course in a decentralized way in Social Networks, MOOC, VLE and others? (ii How to provide pedagogical practices in virtual learning environments that allow students to build their knowledge in an autonomous and reflective way? In this article we present the work we have carried out to answer both questions.

  20. Aerospace Systems Design in NASA's Collaborative Engineering Environment

    Science.gov (United States)

    Monell, Donald W.; Piland, William M.

    1999-01-01

    Past designs of complex aerospace systems involved an environment consisting of collocated design teams with project managers, technical discipline experts, and other experts (e.g. manufacturing and systems operations). These experts were generally qualified only on the basis of past design experience and typically had access to a limited set of integrated analysis tools. These environments provided less than desirable design fidelity, often lead to the inability of assessing critical programmatic and technical issues (e.g., cost risk, technical impacts), and generally derived a design that was not necessarily optimized across the entire system. The continually changing, modern aerospace industry demands systems design processes that involve the best talent available (no matter where it resides) and access to the best design and analysis tools. A solution to these demands involves a design environment referred to as collaborative engineering. The collaborative engineering environment evolving within the National Aeronautics and Space Administration (NASA) is a capability that enables the Agency's engineering infrastructure to interact and use the best state-of-the-art tools and data across organizational boundaries. Using collaborative engineering, the collocated team is replaced with an interactive team structure where the team members are geographically distributed and the best engineering talent can be applied to the design effort regardless of physical location. In addition, a more efficient, higher quality design product is delivered by bringing together the best engineering talent with more up-to-date design and analysis tools. These tools are focused on interactive, multidisciplinary design and analysis with emphasis on the complete life cycle of the system, and they include nontraditional, integrated tools for life cycle cost estimation and risk assessment. NASA has made substantial progress during the last two years in developing a collaborative

  1. Aerospace Systems Design in NASA's Collaborative Engineering Environment

    Science.gov (United States)

    Monell, Donald W.; Piland, William M.

    2000-07-01

    Past designs of complex aerospace systems involved an environment consisting of collocated design teams with project managers, technical discipline experts, and other experts (e.g., manufacturing and systems operations). These experts were generally qualified only on the basis of past design experience and typically had access to a limited set of integrated analysis tools. These environments provided less than desirable design fidelity, often led to the inability of assessing critical programmatic and technical issues (e.g., cost, risk, technical impacts), and generally derived a design that was not necessarily optimized across the entire system. The continually changing, modern aerospace industry demands systems design processes that involve the best talent available (no matter where it resides) and access to the best design and analysis tools. A solution to these demands involves a design environment referred to as collaborative engineering. The collaborative engineering environment evolving within the National Aeronautics and Space Administration (NASA) is a capability that enables the Agency's engineering infrastructure to interact and use the best state-of-the-art tools and data across organizational boundaries. Using collaborative engineering, the collocated team is replaced with an interactive team structure where the team members are geographically distributed and the best engineering talent can be applied to the design effort regardless of physical location. In addition, a more efficient, higher quality design product is delivered by bringing together the best engineering talent with more up-to-date design and analysis tools. These tools are focused on interactive, multidisciplinary design and analysis with emphasis on the complete life cycle of the system, and they include nontraditional, integrated tools for life cycle cost estimation and risk assessment. NASA has made substantial progress during the last two years in developing a collaborative

  2. Advancing Geospatial Technologies in Science and Social Science: A Case Study in Collaborative Education

    Science.gov (United States)

    Williams, N. A.; Morris, J. N.; Simms, M. L.; Metoyer, S.

    2007-12-01

    The Advancing Geospatial Skills in Science and Social Sciences (AGSSS) program, funded by NSF, provides middle and high school teacher-partners with access to graduate student scientists for classroom collaboration and curriculum adaptation to incorporate and advance skills in spatial thinking. AGSSS Fellows aid in the delivery of geospatially-enhanced activities utilizing technology such as geographic information systems, remote sensing, and virtual globes. The partnership also provides advanced professional development for both participating teachers and fellows. The AGSSS program is mutually beneficial to all parties involved. This successful collaboration of scientists, teachers, and students results in greater understanding and enthusiasm for the use of spatial thinking strategies and geospatial technologies. In addition, the partnership produces measurable improvements in student efficacy and attitudes toward processes of spatial thinking. The teacher partner training and classroom resources provided by AGSSS will continue the integration of geospatial activities into the curriculum after the project concludes. Time and resources are the main costs in implementing this partnership. Graduate fellows invest considerable time and energy, outside of academic responsibilities, to develop materials for the classroom. Fellows are required to be available during K-12 school hours, which necessitates forethought in scheduling other graduate duties. However, the benefits far outweigh the costs. Graduate fellows gain experience in working in classrooms. In exchange, students gain exposure to working scientists and their research. This affords graduate fellows the opportunity to hone their communication skills, and specifically allows them to address the issue of translating technical information for a novice audience. Teacher-partners and students benefit by having scientific expertise readily available. In summation, these experiences result in changes in teacher

  3. Elements of a collaborative systems model within the aerospace industry

    Science.gov (United States)

    Westphalen, Bailee R.

    2000-10-01

    Scope and method of study. The purpose of this study was to determine the components of current aerospace collaborative efforts. There were 44 participants from two selected groups surveyed for this study. Nineteen were from the Oklahoma Air National Guard based in Oklahoma City representing the aviation group. Twenty-five participants were from the NASA Johnson Space Center in Houston representing the aerospace group. The surveys for the aviation group were completed in reference to planning missions necessary to their operations. The surveys for the aerospace group were completed in reference to a well-defined and focused goal from a current mission. A questionnaire was developed to survey active participants of collaborative systems in order to consider various components found within the literature. Results were analyzed and aggregated through a database along with content analysis of open-ended question comments from respondents. Findings and conclusions. This study found and determined elements of a collaborative systems model in the aerospace industry. The elements were (1) purpose or mission for the group or team; (2) commitment or dedication to the challenge; (3) group or team meetings and discussions; (4) constraints of deadlines and budgets; (5) tools and resources for project and simulations; (6) significant contributors to the collaboration; (7) decision-making formats; (8) reviews of project; (9) participants education and employment longevity; (10) cross functionality of team or group members; (11) training on the job plus teambuilding; (12) other key elements identified relevant by the respondents but not included in the model such as communication and teamwork; (13) individual and group accountability; (14) conflict, learning, and performance; along with (15) intraorganizational coordination. These elements supported and allowed multiple individuals working together to solve a common problem or to develop innovation that could not have been

  4. Sunfall: a collaborative visual analytics system for astrophysics

    International Nuclear Information System (INIS)

    Aragon, C R; Bailey, S J; Poon, S; Runge, K; Thomas, R C

    2008-01-01

    Computational and experimental sciences produce and collect ever-larger and complex datasets, often in large-scale, multi-institution projects. The inability to gain insight into complex scientific phenomena using current software tools is a bottleneck facing virtually all endeavors of science. In this paper, we introduce Sunfall, a collaborative visual analytics system developed for the Nearby Supernova Factory, an international astrophysics experiment and the largest data volume supernova search currently in operation. Sunfall utilizes novel interactive visualization and analysis techniques to facilitate deeper scientific insight into complex, noisy, high-dimensional, high-volume, time-critical data. The system combines novel image processing algorithms, statistical analysis, and machine learning with highly interactive visual interfaces to enable collaborative, user-driven scientific exploration of supernova image and spectral data. Sunfall is currently in operation at the Nearby Supernova Factory; it is the first visual analytics system in production use at a major astrophysics project

  5. Sunfall: a collaborative visual analytics system for astrophysics

    Energy Technology Data Exchange (ETDEWEB)

    Aragon, Cecilia R.; Aragon, Cecilia R.; Bailey, Stephen J.; Poon, Sarah; Runge, Karl; Thomas, Rollin C.

    2008-07-07

    Computational and experimental sciences produce and collect ever-larger and complex datasets, often in large-scale, multi-institution projects. The inability to gain insight into complex scientific phenomena using current software tools is a bottleneck facing virtually all endeavors of science. In this paper, we introduce Sunfall, a collaborative visual analytics system developed for the Nearby Supernova Factory, an international astrophysics experiment and the largest data volume supernova search currently in operation. Sunfall utilizes novel interactive visualization and analysis techniques to facilitate deeper scientific insight into complex, noisy, high-dimensional, high-volume, time-critical data. The system combines novel image processing algorithms, statistical analysis, and machine learning with highly interactive visual interfaces to enable collaborative, user-driven scientific exploration of supernova image and spectral data. Sunfall is currently in operation at the Nearby Supernova Factory; it is the first visual analytics system in production use at a major astrophysics project.

  6. Sunfall: a collaborative visual analytics system for astrophysics

    Energy Technology Data Exchange (ETDEWEB)

    Aragon, C R; Bailey, S J; Poon, S; Runge, K; Thomas, R C [Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States)], E-mail: CRAragon@lbl.gov

    2008-07-15

    Computational and experimental sciences produce and collect ever-larger and complex datasets, often in large-scale, multi-institution projects. The inability to gain insight into complex scientific phenomena using current software tools is a bottleneck facing virtually all endeavors of science. In this paper, we introduce Sunfall, a collaborative visual analytics system developed for the Nearby Supernova Factory, an international astrophysics experiment and the largest data volume supernova search currently in operation. Sunfall utilizes novel interactive visualization and analysis techniques to facilitate deeper scientific insight into complex, noisy, high-dimensional, high-volume, time-critical data. The system combines novel image processing algorithms, statistical analysis, and machine learning with highly interactive visual interfaces to enable collaborative, user-driven scientific exploration of supernova image and spectral data. Sunfall is currently in operation at the Nearby Supernova Factory; it is the first visual analytics system in production use at a major astrophysics project.

  7. Dynamic Business Collaboration in Supply Chains with Future Internet technologies

    NARCIS (Netherlands)

    Sundmaeker, H.; Verdouw, C.N.

    2014-01-01

    The European Future Internet Initiative, called FIWARE, targets in its final and third phase at acceleration of Small and Medium sized Enterprises (SME). The ‘FInish’ accelerator provides grants for realisation of intelligent systems and specifically business to business (B2B) oriented apps for

  8. Harnessing the Power of Technologies to Manage Collaborative e-Learning Projects in Dispersed Environments

    Science.gov (United States)

    Gosper, Maree Veroncia; McNeill, Margot Anne; Woo, Karen

    2010-01-01

    "The impact of web-based lecture technologies on current and future practice in learning and teaching" was a collaborative project across four Australian universities, funded by the Australian Learning and Teaching Council (ALTC). The project was both exploratory and developmental in nature and according to the project's external…

  9. Learning Technologies: Affective and Social Issues in Computer-Supported Collaborative Learning

    Science.gov (United States)

    Jones, Ann; Issroff, Kim

    2005-01-01

    This paper is concerned with "affective" issues in learning technologies in a collaborative context. Traditionally in learning there has been a division between cognition and affect: where cognition is concerned with skills and processes such as thinking and problem-solving and affect with emotional areas such as motivation, attitudes, feelings.…

  10. Students’ Views about the Problem Based Collaborative Learning Environment Supported By Dynamic Web Technologies

    Directory of Open Access Journals (Sweden)

    Erhan ÜNAL

    2017-04-01

    Full Text Available The purpose of this study is to design a problem based collaborative learning environment supported by dynamic web technologies and examine students’ views about this learning environment. The study was designed as a qualitative research. 36 students who took Object Oriented Programming I-II course from a public university at the department of computer programming participated in the study. During the research process, the Object Oriented Programming I-II course was designed with incorporating different dynamic web technologies (Edmodo, Google Services, and Mind42 and Nelson (1999’s collaborative problem solving method. At the end of the course, there were focus group interviews in regards to the students’ views on a learning environment supported by dynamic web technologies and collaborative problem solving method. At the end of the focus group interviews, 4 themes were obtained from the students’ views, including positive aspects of the learning environment, difficulties faced in the learning environment, advantages of the learning environment, and skills gained as a result of the project. The results suggest that problem based collaborative learning methods and dynamic web technologies can be used in learning environments in community colleges.

  11. Social Media and Networking Technologies: An Analysis of Collaborative Work and Team Communication

    Science.gov (United States)

    Okoro, Ephraim A.; Hausman, Angela; Washington, Melvin C.

    2012-01-01

    Digital communication increases students' learning outcomes in higher education. Web 2.0 technologies encourages students' active engagement, collaboration, and participation in class activities, facilitates group work, and encourages information sharing among students. Familiarity with organizational use and sharing in social networks aids…

  12. Collaborating across Time Zones: How 2.0 Technology Can Bring Your Global Team Together

    Science.gov (United States)

    Hastings, Robin

    2008-01-01

    The Web 2.0 tools and services that are making socializing, networking, and communicating in general so easy are also making group projects seriously simple. With the judicious use of a few of the popular tools that use Web 2.0 technologies and philosophies, one can collaboratively create documents, spreadsheets, presentations, websites, project…

  13. Students' Views about the Problem Based Collaborative Learning Environment Supported by Dynamic Web Technologies

    Science.gov (United States)

    Ünal, Erhan; Çakir, Hasan

    2017-01-01

    The purpose of this study was to design a problem based collaborative learning environment supported by dynamic web technologies and to examine students' views about this learning environment. The study was designed as a qualitative research. Some 36 students who took an Object Oriented Programming I-II course at the department of computer…

  14. Learning about the past with new technologies : Fostering historical reasoning in computer-supported collaborative learning

    NARCIS (Netherlands)

    Drie, J.P. van

    2005-01-01

    Recent technological developments have provided new environments for learning, giving rise to the question of how characteristics of such new learning environments can facilitate the process of learning in specific domains. The focus of this thesis is on computer-supported collaborative learning

  15. Pre-Service Teachers' Learning Styles and Preferences towards Instructional Technology Activities and Collaborative Works

    Science.gov (United States)

    Yusop, Farrah Dina; Sumari, Melati

    2015-01-01

    The main purpose of this exploratory study was to investigate pre-service teachers' learning styles and their preferences with respect to 15 technology-based instructional activities and collaborative work tasks. Felder and Silverman's online Index of Learning Style (ILS) and a questionnaire were used to measure students' learning styles and…

  16. Deep Learning: Enriching Teacher Training through Mobile Technology and International Collaboration

    Science.gov (United States)

    Naylor, Amanda; Gibbs, Janet

    2018-01-01

    This article presents results from an international collaboration between college students and pre-service teachers in Norway and the UK. This research is part of a large, international project exploring and developing the interrelationship between mobile technology and teachers' perceptions of teaching and learning. Data was collected for this…

  17. Information technology and collaboration tools within the e-supply chain management of the aviation industry

    NARCIS (Netherlands)

    Nucciarelli, A.; Gastaldi, M.

    2008-01-01

    This paper investigates strategic actions and grand strategies in the aviation industry. To address this purpose, a review of main strategic change is conducted and information technology is considered as a key factor to identify behaviours of main players. In this context, collaboration emerges as

  18. Collaborative Design of Technology-Enhanced Learning: What Can We Learn from Teacher Talk?

    Science.gov (United States)

    McKenney, Susan; Boschman, Ferry; Pieters, Jules; Voogt, Joke

    2016-01-01

    The collaborative design of technology-enhanced learning is seen as a practical and effective professional development strategy, especially because teachers learn from each other as they share and apply knowledge. But how teacher design team participants draw on and develop their knowledge has not yet been investigated. This qualitative…

  19. Online Collaborative Mentoring for Technology Integration in Pre-Service Teacher Education

    Science.gov (United States)

    Dorner, Helga; Kumar, Swapna

    2016-01-01

    The Mentored Innovation Model is an online collaborative mentoring model developed in Hungary to help teachers integrate technology in their classrooms in meaningful ways. It combines an online modular approach of formal pedagogical ICT training with an informal online community experience of sharing, developing and critiquing of shared learning…

  20. Impact of Antecedent Factors on Collaborative Technologies Usage among Academic Researchers in Malaysian Research Universities

    Science.gov (United States)

    Mohd Daud, Norzaidi; Zakaria, Halimi

    2017-01-01

    Purpose: The purpose of this paper is to investigate the impact of antecedent factors on collaborative technologies usage among academic researchers in Malaysian research universities. Design/methodology/approach: Data analysis was conducted on data collected from 156 academic researchers from five Malaysian research universities. This study…

  1. Virtual Teaming and Collaboration Technology: A Study of Influences on Virtual Project Outcomes

    Science.gov (United States)

    Broils, Gary C.

    2014-01-01

    The purpose of this quantitative correlational study was to explore the relationships between the independent variables, contextual factors for virtual teams and collaboration technology, and the dependent variable, virtual project outcomes. The problem leading to the need for the study is a lower success rate for virtual projects compared to…

  2. Enhancing Classroom Performance: A Technology Design to Support the Integration of Collaborative Learning and Participative Teams

    Science.gov (United States)

    Marsh, Michael T.; Taylor, Ronald; Holoviak, Stephen J.

    2008-01-01

    Integral components of today's successful business models frequently include information technology, effective collaboration, and participative teamwork among employees. It is in the best interest of students for educators to provide classrooms that reflect a profitable practitioner's environment. Students studying for careers in business should…

  3. Collaborative technologies for distributed science: fusion energy and high-energy physics

    International Nuclear Information System (INIS)

    Schissel, D P; Gottschalk, E E; Greenwald, M J; McCune, D

    2006-01-01

    This paper outlines a strategy to significantly enhance scientific collaborations in both Fusion Energy Sciences and in High-Energy Physics through the development and deployment of new tools and technologies into working environments. This strategy is divided into two main elements, collaborative workspaces and secure computational services. Experimental and theory/computational programs will greatly benefit through the provision of a flexible, standards-based collaboration space, which includes advanced tools for ad hoc and structured communications, shared applications and displays, enhanced interactivity for remote data access applications, high performance computational services and an improved security environment. The technologies developed should be prototyped and tested on the current generation of experiments and numerical simulation projects. At the same time, such work should maintain a strong focus on the needs of the next generation of mega-projects, ITER and the ILC. Such an effort needs to leverage existing computer science technology and take full advantage of commercial software wherever possible. This paper compares the requirements of FES and HEP, discuss today's solutions, examine areas where more functionality is required, and discuss those areas with sufficient overlap in requirements that joint research into collaborative technologies will increase the benefit to both

  4. A Collaborative Education Network for Advancing Climate Literacy using Data Visualization Technology

    Science.gov (United States)

    McDougall, C.; Russell, E. L.; Murray, M.; Bendel, W. B.

    2013-12-01

    One of the more difficult issues in engaging broad audiences with scientific research is to present it in a way that is intuitive, captivating and up-to-date. Over the past ten years, the National Oceanic and Atmospheric Administration (NOAA) has made significant progress in this area through Science On a Sphere(R) (SOS). SOS is a room-sized, global display system that uses computers and video projectors to display Earth systems data onto a six-foot diameter sphere, analogous to a giant animated globe. This well-crafted data visualization system serves as a way to integrate and display global change phenomena; including polar ice melt, projected sea level rise, ocean acidification and global climate models. Beyond a display for individual data sets, SOS provides a holistic global perspective that highlights the interconnectedness of Earth systems, nations and communities. SOS is now a featured exhibit at more than 100 science centers, museums, universities, aquariums and other institutions around the world reaching more than 33 million visitors every year. To facilitate the development of how this data visualization technology and these visualizations could be used with public audiences, we recognized the need for the exchange of information among the users. To accomplish this, we established the SOS Users Collaborative Network. This network consists of the institutions that have an SOS system or partners who are creating content and educational programming for SOS. When we began the Network in 2005, many museums had limited capacity to both incorporate real-time, authentic scientific data about the Earth system and interpret global change visualizations. They needed not only the visualization platform and the scientific content, but also assistance with methods of approach. We needed feedback from these users on how to craft understandable visualizations and how to further develop the SOS platform to support learning. Through this Network and the collaboration

  5. Mass storage system by using broadcast technology

    International Nuclear Information System (INIS)

    Fujii, Hirofumi; Itoh, Ryosuke; Manabe, Atsushi; Miyamoto, Akiya; Morita, Youhei; Nozaki, Tadao; Sasaki, Takashi; Watase, Yoshiyuko; Yamasaki, Tokuyuki

    1996-01-01

    There are many similarities between data recording systems for high energy physics and broadcast systems; the data flow is almost one-way, requires real-time recording; requires large-scale automated libraries for 24-hours operation, etc. In addition to these functional similarities, the required data-transfer and data-recording speeds are also close to those for near future experiments. For these reasons, we have collaborated with SONY Broadcast Company to study the usability of broadcast devices for our data storage system. Our new data storage system consists of high-speed data recorders and tape-robots which are originally based on the digital video-tape recorder and the tape-robot for broadcast systems. We are also studying the possibility to use these technologies for the online data-recording system for B-physics experiment at KEK. (author)

  6. A Collaborative Digital Pathology System for Multi-Touch Mobile and Desktop Computing Platforms

    KAUST Repository

    Jeong, W.

    2013-06-13

    Collaborative slide image viewing systems are becoming increasingly important in pathology applications such as telepathology and E-learning. Despite rapid advances in computing and imaging technology, current digital pathology systems have limited performance with respect to remote viewing of whole slide images on desktop or mobile computing devices. In this paper we present a novel digital pathology client-server system that supports collaborative viewing of multi-plane whole slide images over standard networks using multi-touch-enabled clients. Our system is built upon a standard HTTP web server and a MySQL database to allow multiple clients to exchange image and metadata concurrently. We introduce a domain-specific image-stack compression method that leverages real-time hardware decoding on mobile devices. It adaptively encodes image stacks in a decorrelated colour space to achieve extremely low bitrates (0.8 bpp) with very low loss of image quality. We evaluate the image quality of our compression method and the performance of our system for diagnosis with an in-depth user study. Collaborative slide image viewing systems are becoming increasingly important in pathology applications such as telepathology and E-learning. Despite rapid advances in computing and imaging technology, current digital pathology systems have limited performance with respect to remote viewing of whole slide images on desktop or mobile computing devices. In this paper we present a novel digital pathology client-server systems that supports collaborative viewing of multi-plane whole slide images over standard networks using multi-touch enabled clients. Our system is built upon a standard HTTP web server and a MySQL database to allow multiple clients to exchange image and metadata concurrently. © 2013 The Eurographics Association and John Wiley & Sons Ltd.

  7. A Collaborative Digital Pathology System for Multi-Touch Mobile and Desktop Computing Platforms

    KAUST Repository

    Jeong, W.; Schneider, J.; Hansen, A.; Lee, M.; Turney, S. G.; Faulkner-Jones, B. E.; Hecht, J. L.; Najarian, R.; Yee, E.; Lichtman, J. W.; Pfister, H.

    2013-01-01

    Collaborative slide image viewing systems are becoming increasingly important in pathology applications such as telepathology and E-learning. Despite rapid advances in computing and imaging technology, current digital pathology systems have limited performance with respect to remote viewing of whole slide images on desktop or mobile computing devices. In this paper we present a novel digital pathology client-server system that supports collaborative viewing of multi-plane whole slide images over standard networks using multi-touch-enabled clients. Our system is built upon a standard HTTP web server and a MySQL database to allow multiple clients to exchange image and metadata concurrently. We introduce a domain-specific image-stack compression method that leverages real-time hardware decoding on mobile devices. It adaptively encodes image stacks in a decorrelated colour space to achieve extremely low bitrates (0.8 bpp) with very low loss of image quality. We evaluate the image quality of our compression method and the performance of our system for diagnosis with an in-depth user study. Collaborative slide image viewing systems are becoming increasingly important in pathology applications such as telepathology and E-learning. Despite rapid advances in computing and imaging technology, current digital pathology systems have limited performance with respect to remote viewing of whole slide images on desktop or mobile computing devices. In this paper we present a novel digital pathology client-server systems that supports collaborative viewing of multi-plane whole slide images over standard networks using multi-touch enabled clients. Our system is built upon a standard HTTP web server and a MySQL database to allow multiple clients to exchange image and metadata concurrently. © 2013 The Eurographics Association and John Wiley & Sons Ltd.

  8. Art-Science-Technology collaboration through immersive, interactive 3D visualization

    Science.gov (United States)

    Kellogg, L. H.

    2014-12-01

    At the W. M. Keck Center for Active Visualization in Earth Sciences (KeckCAVES), a group of geoscientists and computer scientists collaborate to develop and use of interactive, immersive, 3D visualization technology to view, manipulate, and interpret data for scientific research. The visual impact of immersion in a CAVE environment can be extremely compelling, and from the outset KeckCAVES scientists have collaborated with artists to bring this technology to creative works, including theater and dance performance, installations, and gamification. The first full-fledged collaboration designed and produced a performance called "Collapse: Suddenly falling down", choreographed by Della Davidson, which investigated the human and cultural response to natural and man-made disasters. Scientific data (lidar scans of disaster sites, such as landslides and mine collapses) were fully integrated into the performance by the Sideshow Physical Theatre. This presentation will discuss both the technological and creative characteristics of, and lessons learned from the collaboration. Many parallels between the artistic and scientific process emerged. We observed that both artists and scientists set out to investigate a topic, solve a problem, or answer a question. Refining that question or problem is an essential part of both the creative and scientific workflow. Both artists and scientists seek understanding (in this case understanding of natural disasters). Differences also emerged; the group noted that the scientists sought clarity (including but not limited to quantitative measurements) as a means to understanding, while the artists embraced ambiguity, also as a means to understanding. Subsequent art-science-technology collaborations have responded to evolving technology for visualization and include gamification as a means to explore data, and use of augmented reality for informal learning in museum settings.

  9. Integrative Technologies Complicate Communication during Development Work Context: Industry-Academy Collaboration

    Directory of Open Access Journals (Sweden)

    Pauliina Mansikkamäki

    2007-06-01

    Full Text Available A competition in the electronics industry is hard. For most companies, strong technological know-how will be a competitiveness factor in the future. The future technologies will be increasingly based on a combination of innovations from several branches of science. Also, many innovations are based on external technology integration. The days are over when one company could internally create all of the technology it needs to maintain its competitiveness. One approach of promising framework for the development of a new integrative technology is an industrial R&D network combined with industrial-academic collaboration. However, this kind of collaboration is a challenging undertaking. Companies in a value network might have very different expectations regarding a new technology due to differences in their position in the value network or their company strategy. One of the main challenges in an R&D network is to translate the expectations of all parties involved into new technology solutions so that all in the R&D network feel they have obtained benefit. One of key factors on creating successful industrial-academic collaboration is open and trustful communication. But, there are communication challenges, intellectual property sharing problems, and discussions regarding the sharing of cost and benefits. Developing a new integrative technology structure requires seamless teamwork, holistic and interdisciplinary understanding, and open communication throughout the R&D team and the industrial-academic network. The focus of this paper is on network communication, knowledge communication and team communication. The results of this study indicate that successful communication in an industrial-academic R&D network to develop a new integrative technology improves knowledge creation and accelerates commercialization of the technology.

  10. Does an intelligent tutor homework system encourage beneficial collaboration?

    Science.gov (United States)

    van de Sande, Brett; Hausmann, Robert

    2008-03-01

    Physics instructors agree that homework assignments are an integral part of physics instruction. When students complete their assignments, we know they may work individually or in small groups. Unfortunately, most computer-based homework systems are structured for individual learners. In particular, these systems only evaluate the final answer, putting pressure on any students working in groups to engage in copying. In contrast, Andes is an intelligent tutor homework helper that requires students to show intermediate steps when solving a problem. Andes has been used successfully by instructors at several colleges and high schools. In order to investigate collaborative versus individual problem solving, we conducted a lab study where we recorded verbal self-explanations and logged solution steps as individuals and student pairs used Andes to solve a set of problems. We found that students working in pairs relied less on the tutor's hints and engaged in collaborative sense-making. Implications for instructional practices are discussed.

  11. A Timed Colored Petri Net Simulation-Based Self-Adaptive Collaboration Method for Production-Logistics Systems

    OpenAIRE

    Zhengang Guo; Yingfeng Zhang; Xibin Zhao; Xiaoyu Song

    2017-01-01

    Complex and customized manufacturing requires a high level of collaboration between production and logistics in a flexible production system. With the widespread use of Internet of Things technology in manufacturing, a great amount of real-time and multi-source manufacturing data and logistics data is created, that can be used to perform production-logistics collaboration. To solve the aforementioned problems, this paper proposes a timed colored Petri net simulation-based self-adaptive colla...

  12. Collaborative Branding of Partnered Health Systems in Radiology.

    Science.gov (United States)

    Kalambo, Megan; Parikh, Jay R

    2018-01-01

    In an effort to expand clinical reach and achieve economies of scale, academic radiology practices are strategically expanding into the community by establishing partnerships with existing community health systems. A challenge with this model is to effectively brand the collaboration in a way that underscores the strengths of both partners. In this article, the authors look at the benefits and risks of cobranding and review cobranding strategies for implementation by academic radiology practices considering partnership-based network expansion. Published by Elsevier Inc.

  13. About Parallel Programming: Paradigms, Parallel Execution and Collaborative Systems

    Directory of Open Access Journals (Sweden)

    Loredana MOCEAN

    2009-01-01

    Full Text Available In the last years, there were made efforts for delineation of a stabile and unitary frame, where the problems of logical parallel processing must find solutions at least at the level of imperative languages. The results obtained by now are not at the level of the made efforts. This paper wants to be a little contribution at these efforts. We propose an overview in parallel programming, parallel execution and collaborative systems.

  14. System collaboration and Information Sharing through Internet of Things

    OpenAIRE

    Grubisic, Maja; Marsic, Tina

    2015-01-01

    The focus of this thesis is realization of system collaboration and information sharing between devices through Internet of Things. Internet of Things is a network of things, where a thing can be any device capable of acquiring an IP address. Internet of Things has been discussed in many domains. Companies are exploring the full potential of it, with the purpose of automating their services and optimizing their productivity. In this thesis we have conducted a systematic research review to inv...

  15. A Functional Sketch For Resources Management In Collaborative Systems For Business

    Directory of Open Access Journals (Sweden)

    Moca Mircea

    2008-04-01

    Full Text Available This paper presents a functional design sketch for the resource management module of a highly scalable collaborative system. Small and medium enterprises require such tools in order to benefit from and develop innovative business ideas and technologies. As computing power is a modern increasing demand and no easy and cheap solutions are defined, especially small companies or emerging business projects abide a more accessible alternative. Our work targets to settle a model for how P2P architecture can be used as infrastructure for a collaborative system that delivers resource access services. We are focused on finding a workable collaborative strategy between peers so that the system offers a cheap, trustable and quality service. Thus, in this phase we are not concerned about solutions for a specific type of task to be executed by peers, but only considering CPU power as resource. This work concerns the resource management module as a part of a larger project in which we aim to build a collaborative system for businesses with important resource demands

  16. Development of tritium plant system for fusion reactors. Achievements in the 14-year US-Japan collaboration

    International Nuclear Information System (INIS)

    Nishi, Masataka; Yamanishi, Toshihiko; Shu, Wataru

    2003-01-01

    Fuel processing technology and tritium safe-handling technology have been developed through US/DOE-JAERI collaboration from 1987 till 2001, and the technologies to construct the tritium plant system of ITER have been made currently available. This paper overviews the major achievements of this collaborative researches over fourteen years, which were performed mainly at the Tritium Systems Test Assembly (TSTA) of the Los Alamos National Laboratory (LANL). The tritium plant system consists mainly of a fuel processing system, which includes a fuel cycle system and a blanket tritium recovery system, and a tritium confinement/removal system. The fuel cycle system recovers fuel from plasma exhaust gas and recycles it. In the collaboration, major key components and subsystems were developed, and the performance of the integrated system was successfully demonstrated over its one-month operation in which plasma exhaust model gas was processed at a processing rate of up to 1/6 level of the ITER. The technological basis of the fuel cycle system was thus established. Blanket tritium recovery technology was also successfully demonstrated using the TSTA system. Through the successful safe-operation of the TSTA, reliability of tritium confinement/removal system was verified basically. In addition, much data to confirm or enhance safety were accumulated by experiments such as intentional tritium release in a large room. Furthermore, distribution of tritium contamination in the vacuum vessel of the TFTR, a large tokamak of the Princeton Plasma Physics Laboratory (PPPL), was investigated in this work. (author)

  17. Development of Tritium Plant System for Fusion Reactors - Achievements in the 14-year US-Japan Collaboration -

    Science.gov (United States)

    Nishi, Masataka; Yamanishi, Toshihiko; Shu, Wataru

    Fuel processing technology and tritium safe-handling technology have been developed through US/DOE-JAERI collaboration from 1987 till 2001, and the technologies to construct the tritium plant system of ITER have been made currently available. This paper overviews the major achievements of this collaborative researches over fourteen years, which were performed mainly at the Tritium Systems Test Assembly (TSTA) of the Los Alamos National Laboratory (LANL). The tritium plant system consists mainly of a fuel processing system, which includes a fuel cycle system and a blanket tritium recovery system, and a tritium confinement/removal system. The fuel cycle system recovers fuel from plasma exhaust gas and recycles it. In the collaboration, major key components and subsystems were developed, and the performance of the integrated system was successfully demonstrated over its one-month operation in which plasma exhaust model gas was processed at a processing rate of up to 1/6 level of the ITER. The technological basis of the fuel cycle system was thus established. Blanket tritium recovery technology was also successfully demonstrated using the TSTA system. Through the successful safeoperation of the TSTA, reliability of tritium confinement/removal system was verified basically. In addition, much data to confirm or enhance safety were accumulated by experiments such as intentional tritium release in a large room. Furthermore,distribution of tritium contamination in the vacuum vessel of the TFTR, a large tokamak of the Princeton Plasma Physics Laboratory (PPPL), was investigated in this work.

  18. Information technology equipment cooling system

    Science.gov (United States)

    Schultz, Mark D.

    2014-06-10

    According to one embodiment, a system for removing heat from a rack of information technology equipment may include a sidecar indoor air to liquid heat exchanger that cools warm air generated by the rack of information technology equipment. The system may also include a liquid to liquid heat exchanger and an outdoor heat exchanger. The system may further include configurable pathways to connect and control fluid flow through the sidecar heat exchanger, the liquid to liquid heat exchanger, the rack of information technology equipment, and the outdoor heat exchanger based upon ambient temperature and/or ambient humidity to remove heat from the rack of information technology equipment.

  19. Collaborative Plant Breeding for Organic Agricultural Systems in Developed Countries

    Directory of Open Access Journals (Sweden)

    Isabelle Goldringer

    2011-08-01

    Full Text Available Because organic systems present complex environmental stress, plant breeders may either target very focused regions for different varieties, or create heterogeneous populations which can then evolve specific adaptation through on-farm cultivation and selection. This often leads to participatory plant breeding (PPB strategies which take advantage of the specific knowledge of farmers. Participatory selection requires increased commitment and engagement on the part of the farmers and researchers. Projects may begin as researcher initiatives with farmer participation or farmer initiatives with researcher participation and over time evolve into true collaborations. These projects are difficult to plan in advance because by nature they change to respond to the priorities and interests of the collaborators. Projects need to provide relevant information and analysis in a time-frame that is meaningful for farmers, while remaining scientifically rigorous and innovative. This paper presents two specific studies: the first was a researcher-designed experiment that assessed the potential adaptation of landraces to organic systems through on-farm cultivation and farmer selection. The second is a farmer-led plant breeding project to select bread wheat for organic systems in France. Over the course of these two projects, many discussions among farmers, researchers and farmers associations led to the development of methods that fit the objectives of those involved. This type of project is no longer researcher-led or farmer-led but instead an equal collaboration. Results from the two research projects and the strategy developed for an ongoing collaborative plant breeding project are discussed.

  20. Identity Orientation, Social Exchange, and Information Technology Use in Interorganizational Collaborations

    DEFF Research Database (Denmark)

    Gal, Uri; Jensen, Tina Blegind; Lyytinen, Kalle

    2014-01-01

    Advances in information technologies (IT) are creating unprecedented opportunities for interorganizational collaboration, particularly in large-scale distributed projects. The use of advanced IT in such projects can foster new forms of social exchange among organizations and change the way...... identity orientations. To address this gap, we conduct multiple case studies that describe the changing use of two-dimensional computer-aided design technology and new three-dimensional modeling technologies by a leading metal fabrication company in the architecture, engineering, and construction industry...

  1. Derivation and validation of the Systemic Lupus International Collaborating Clinics classification criteria for systemic lupus erythematosus

    DEFF Research Database (Denmark)

    Petri, Michelle; Orbai, Ana-Maria; Alarcón, Graciela S

    2012-01-01

    The Systemic Lupus International Collaborating Clinics (SLICC) group revised and validated the American College of Rheumatology (ACR) systemic lupus erythematosus (SLE) classification criteria in order to improve clinical relevance, meet stringent methodology requirements, and incorporate new...

  2. Ontology-Based User Profiling for Personalized Acces to Information within Collaborative Learning System

    Directory of Open Access Journals (Sweden)

    Mohammed Amine Alimam

    2014-06-01

    Full Text Available The use of modern educational technology methods has become an important area of research in order to support learning as well as collaboration. This is especially evident with the rise of internet and web 2.0 platforms that have transformed users’ role from mere content consumers to fully content consumers-producers. Furthermore, people engaged in collaborative learning capitalize on one another’s resources and skills, unlike individual learning. This paper proceeds with a categorization of the main tools and functions that characterize the personalization learning aspect, in order to discuss their trade-offs with collaborative learning systems. It proposes a framework of a personalized information research (IR within a collaborative learning system, incorporating the characterization of the research type carried by the query, as well as modeling and constructing semantic users’ profiles. We use the context of the user query into a prediction mechanism of the search type, based on a previous identification of users’ levels and interests. The paper is concluded by presenting experiment results, revealing that the use of the subject ontology extension approach satisfyingly contributes to improvement in the accuracy of system recommendations.

  3. CooMan - a global collaborative project management system

    International Nuclear Information System (INIS)

    Souza, J.M. de; Palma, S.

    1994-01-01

    Project Coordination and Management have long been recognized as an area with growing problems and unsatisfactory solutions. Conciliating flexibility with target achievements is historically the main problem to face. The difficulties have been growing at more than linear ratio with the size and complexity of the Projects being developed in the present days. The HEP communities suffer additional challenges because of the distributed nature of the collaborations, the novelty of each project; and the less authoritarian form of leadership and management of team and individual. This prevents the adoption of more centralized focus on decision. CooMan intends to be a Global Collaborative Project Management System. This paper discusses the basic aspects of the concepts involved, outlining how task coordination, acts of speech, and World-Wide hyper media can be used to support project management activities. A distributed tool to implement such proposition is described, and a first prototype is presented

  4. An Integrated Framework Of Web 2.0 Technology And A Collaborative Learning

    Directory of Open Access Journals (Sweden)

    Mohamed Madar

    2015-05-01

    Full Text Available Abstract This paper contributes to the suitability of web 2.0 technology in implementing collaborative learning and proposes an integrated framework of Web 2.0 tools and collaborative learning activities. This paper is also identifying the mismatch between adopting web 2.0 technologies and the delivery of the curriculum on the cloud or via the Internet. It is found that Web 2.0 and a collaborative learning are two platforms to be easily synchronized due to their common attributes that enable their complementariness. This paper argues that integrated framework of Web 2.0 and CL allow users exploit teachinglearning materials maximally and at the same upsurges learners understanding in the subject knowledge. Suitable of Web 2.0 in implementing curriculum was also encouraged since the proposed framework consists of both components of Web 2.0 functions and activities of collaborative learning environment. Pedagogically there has been a mismatch between E-learning technologies and mode of delivery for instance E-learning platforms are widely used to increase content accessibility only while now this framework introduces that Web 2.0 technology of E-learning can also be used to create share knowledge among users. The proposed framework if efficiently exploited will also allow users at all levels create personalized learning environment which suits perspective teachinglearning styles of the users. Apart from academic achievement or enhancements of the teaching and learning processes the proposed framework also would help learners develop generic skills which are very important in the workplaces. As a result of this fast and independent learning technically depend on technology based pedagogy and in this case this proposed model has two dimensions which are very crucial to the enrichment of students learning activities.

  5. Collaborative Management of Risks and Complexity in Banking Systems

    Directory of Open Access Journals (Sweden)

    Ion IVAN

    2012-01-01

    Full Text Available This paper describes types of risks encountered in banking systems and ways to prevent and eliminate them. Banking systems are presented in order to have a view on banking activities and processes that generates risks. The risks in banking processes are analyzed and the collaborative character of risk management is highlighted. A way to control the risk in banking systems through information security is described. Risks arise from system complexity, thus evaluation and comparison of different configurations are bases for improvements. The Halstead relative complexity function synthesizes system complexity from the point of view of the size of the variables analyzed and the heterogeneity between the variables. Section four was realized by Catalin SBORA.

  6. Collaborative Knowledge Framework for Mediation Information System Engineering

    Directory of Open Access Journals (Sweden)

    Wenxin Mu

    2017-01-01

    Full Text Available With the worldwide interenterprise collaboration and interoperability background, automatic collaborative business process deduction is crucial and imperative researching subject. A methodology of deducing collaborative process is designed by collecting collaborative knowledge. Due to the complexity of deduction methodology, a collaborative knowledge framework is defined to organize abstract and concrete collaborative information. The collaborative knowledge framework contains three dimensions: elements, levels, and life cycle. To better define the framework, the relations in each dimension are explained in detail. They are (i relations among elements, which organize the gathering orders and methods of different collaborative elements, (ii relations among life cycle, which present modeling processes and agility management, and (iii relations among levels, which define relationships among different levels of collaborative processes: strategy, operation, and support. This paper aims to explain the collaborative knowledge framework and the relations inside.

  7. Occupational Therapy and assistive technology: thoughts about the experience with collaborative school consulting

    Directory of Open Access Journals (Sweden)

    Luciana Ramos Baleotti

    2017-06-01

    Full Text Available This study presents thoughts and ideas based on the experience developed in the project entitled Assistive Technology for Inclusion of Students with Physical Disorders: Resources and Procedures, in development since 2009. This project aims to help in the process of school inclusion of students with physical disorder in Early Childhood Education in the city of Marilia, Brazil, through the collaboration between Health and Education departments. Health professionals contribute through the implementation of the Assistive Technology by means of school consulting. The project has been developed in six different stages, namely: Gaining access and establishing goals for the team; Identifying the problem; Interventions/Recommendations; Implementation; Evaluation and further actions. This working model, seeks to insert occupational therapy in the school environment. This project showed the importance of occupational therapists as team members in school settings, and the importance of a collaborative work between Education and Health departments.

  8. AIR Louisville: Addressing Asthma With Technology, Crowdsourcing, Cross-Sector Collaboration, And Policy.

    Science.gov (United States)

    Barrett, Meredith; Combs, Veronica; Su, Jason G; Henderson, Kelly; Tuffli, Michael

    2018-04-01

    Cross-sector partnerships benefit public health by leveraging ideas, resources, and expertise from a wide range of partners. In this study we documented the process and impact of AIR Louisville (a collaboration forged among the Louisville Metro Government, a nonprofit institute, and a technology company) in successfully tackling a complex public health challenge: asthma. We enrolled residents of Louisville, Kentucky, with asthma and used electronic inhaler sensors to monitor where and when they used medication. We found that the use of the digital health platform achieved positive clinical outcomes, including a 78 percent reduction in rescue inhaler use and a 48 percent improvement in symptom-free days. Moreover, the crowdsourced real-world data on inhaler use, combined with environmental data, led to policy recommendations including enhancing tree canopy, tree removal mitigation, zoning for air pollution emission buffers, recommended truck routes, and developing a community asthma notification system. AIR Louisville represents a model that can be replicated to address many public health challenges by simultaneously guiding individual, clinical, and policy decisions.

  9. Design of Agricultural Cleaner Production Technology System

    OpenAIRE

    Hu, Jun-mei; Wang, Xin-jie

    2009-01-01

    Based on the introduction of agricultural cleaner production, technology system design of planting cleaner production is discussed from five aspects of water-saving irrigation technology, fertilization technology, diseases and insects control technology, straw comprehensive utilization technology and plastic film pollution control technology. Cleaner production technology system of livestock and poultry raise is constructed from the aspects of source control technology, reduction technique in...

  10. Millimeter radiometer system technology

    Science.gov (United States)

    Wilson, W. J.; Swanson, P. N.

    1989-07-01

    JPL has had a large amount of experience with spaceborne microwave/millimeter wave radiometers for remote sensing. All of the instruments use filled aperture antenna systems from 5 cm diameter for the microwave Sounder Units (MSU), 16 m for the microwave limb sounder (MLS) to 20 m for the large deployable reflector (LDR). The advantages of filled aperture antenna systems are presented. The requirements of the 10 m Geoplat antenna system, 10 m multified antenna, and the MLS are briefly discussed.

  11. Accelerating cancer systems biology research through Semantic Web technology.

    Science.gov (United States)

    Wang, Zhihui; Sagotsky, Jonathan; Taylor, Thomas; Shironoshita, Patrick; Deisboeck, Thomas S

    2013-01-01

    Cancer systems biology is an interdisciplinary, rapidly expanding research field in which collaborations are a critical means to advance the field. Yet the prevalent database technologies often isolate data rather than making it easily accessible. The Semantic Web has the potential to help facilitate web-based collaborative cancer research by presenting data in a manner that is self-descriptive, human and machine readable, and easily sharable. We have created a semantically linked online Digital Model Repository (DMR) for storing, managing, executing, annotating, and sharing computational cancer models. Within the DMR, distributed, multidisciplinary, and inter-organizational teams can collaborate on projects, without forfeiting intellectual property. This is achieved by the introduction of a new stakeholder to the collaboration workflow, the institutional licensing officer, part of the Technology Transfer Office. Furthermore, the DMR has achieved silver level compatibility with the National Cancer Institute's caBIG, so users can interact with the DMR not only through a web browser but also through a semantically annotated and secure web service. We also discuss the technology behind the DMR leveraging the Semantic Web, ontologies, and grid computing to provide secure inter-institutional collaboration on cancer modeling projects, online grid-based execution of shared models, and the collaboration workflow protecting researchers' intellectual property. Copyright © 2012 Wiley Periodicals, Inc.

  12. Voice Response Systems Technology.

    Science.gov (United States)

    Gerald, Jeanette

    1984-01-01

    Examines two methods of generating synthetic speech in voice response systems, which allow computers to communicate in human terms (speech), using human interface devices (ears): phoneme and reconstructed voice systems. Considerations prior to implementation, current and potential applications, glossary, directory, and introduction to Input Output…

  13. Ubiquitous Robotic Technology for Smart Manufacturing System.

    Science.gov (United States)

    Wang, Wenshan; Zhu, Xiaoxiao; Wang, Liyu; Qiu, Qiang; Cao, Qixin

    2016-01-01

    As the manufacturing tasks become more individualized and more flexible, the machines in smart factory are required to do variable tasks collaboratively without reprogramming. This paper for the first time discusses the similarity between smart manufacturing systems and the ubiquitous robotic systems and makes an effort on deploying ubiquitous robotic technology to the smart factory. Specifically, a component based framework is proposed in order to enable the communication and cooperation of the heterogeneous robotic devices. Further, compared to the service robotic domain, the smart manufacturing systems are often in larger size. So a hierarchical planning method was implemented to improve the planning efficiency. A test bed of smart factory is developed. It demonstrates that the proposed framework is suitable for industrial domain, and the hierarchical planning method is able to solve large problems intractable with flat methods.

  14. The Radical Flank Effect and Cross-occupational Collaboration for Technology Development during a Power Shift

    Science.gov (United States)

    Truelove, Emily; Kellogg, Katherine C.

    2016-01-01

    This 12-month ethnographic study of an early entrant into the U.S. car-sharing industry demonstrates that when an organization shifts its focus from developing radical new technology to incrementally improving this technology, the shift may spark an internal power struggle between the dominant engineering group and a challenger occupational group such as the marketing group. Analyzing 42 projects in two time periods that required collaboration between engineering and marketing during such a shift, we show how cross-occupational collaboration under these conditions can be facilitated by a radical flank threat, through which the bargaining power of moderates is strengthened by the presence of a more-radical group. In the face of a strong threat by radical members of a challenger occupational group, moderate members of the dominant engineering group may change their perceptions of their power to resist challengers’ demands and begin to distinguish between the goals of radical versus more-moderate challengers. To maintain as much power as possible and prevent the more-dramatic change in engineering occupational goals demanded by radical challengers, moderate engineers may build a coalition with moderate challengers and collaborate for incremental technology development. PMID:28424533

  15. Collaborative Visualization Project: shared-technology learning environments for science learning

    Science.gov (United States)

    Pea, Roy D.; Gomez, Louis M.

    1993-01-01

    Project-enhanced science learning (PESL) provides students with opportunities for `cognitive apprenticeships' in authentic scientific inquiry using computers for data-collection and analysis. Student teams work on projects with teacher guidance to develop and apply their understanding of science concepts and skills. We are applying advanced computing and communications technologies to augment and transform PESL at-a-distance (beyond the boundaries of the individual school), which is limited today to asynchronous, text-only networking and unsuitable for collaborative science learning involving shared access to multimedia resources such as data, graphs, tables, pictures, and audio-video communication. Our work creates user technology (a Collaborative Science Workbench providing PESL design support and shared synchronous document views, program, and data access; a Science Learning Resource Directory for easy access to resources including two-way video links to collaborators, mentors, museum exhibits, media-rich resources such as scientific visualization graphics), and refine enabling technologies (audiovisual and shared-data telephony, networking) for this PESL niche. We characterize participation scenarios for using these resources and we discuss national networked access to science education expertise.

  16. The Radical Flank Effect and Cross-occupational Collaboration for Technology Development during a Power Shift.

    Science.gov (United States)

    Truelove, Emily; Kellogg, Katherine C

    2016-12-01

    This 12-month ethnographic study of an early entrant into the U.S. car-sharing industry demonstrates that when an organization shifts its focus from developing radical new technology to incrementally improving this technology, the shift may spark an internal power struggle between the dominant engineering group and a challenger occupational group such as the marketing group. Analyzing 42 projects in two time periods that required collaboration between engineering and marketing during such a shift, we show how cross-occupational collaboration under these conditions can be facilitated by a radical flank threat, through which the bargaining power of moderates is strengthened by the presence of a more-radical group. In the face of a strong threat by radical members of a challenger occupational group, moderate members of the dominant engineering group may change their perceptions of their power to resist challengers' demands and begin to distinguish between the goals of radical versus more-moderate challengers. To maintain as much power as possible and prevent the more-dramatic change in engineering occupational goals demanded by radical challengers, moderate engineers may build a coalition with moderate challengers and collaborate for incremental technology development.

  17. A study on technology development strategy and collaborative relationships using patent information

    Science.gov (United States)

    Nakaoka, Iori; Fujino, Hayato; Chen, Yunju; Park, Yousin; Matsuno, Seigo

    2017-10-01

    Japanese economy has fallen into a long downturn called "The Lost Two Decades" after the collapse of bubble economy in early 1990s. Many companies could not gain competitive advantages although they conducted various management reforms to restore their competitiveness. The companies that have played the main role of the Japanese economy growth until then have lost the sustained competitive advantage. Moreover, they have struggled in the global market even now. On the other hand, Japanese automobile companies have high competitiveness and market share due to their advanced technology development. It is considered that personnel groups engaged in research and development of their companies cannot turn into core rigidity and the structure also hinders new core capabilities. In addition, there is a hypothesis that the close relationships with many suppliers contribute to acquisition of competitive advantage. Therefore, this paper focuses on the collaboration relationships with suppliers and core rigidity of human resources related to research and development as the analysis factors. First, we analyze the composition and core rigidity degree of human resources involved in technology development by social network analysis using patent information, which represents the research and development capability. Second, we analyze the degree of collaboration among companies based on the hypothesis that advanced technology development can be executed by joint research and developments with many kinds of suppliers. As a result, features of close collaboration with suppliers and high core rigidity rate in the Japanese automobile industry are clarified.

  18. Teaching strategic and systems design to facilitate collaboration and learning

    Directory of Open Access Journals (Sweden)

    Andre Liem

    2012-08-01

    Full Text Available As strategic and systems approaches are becoming more relevant in design education when it concerns collaborative projects with the industry, an explicit systems design methodology is needed to structure collaboration and learning among students, educators, and the Norwegian industry. This article describes three alternative studio projects for teaching strategic and systems design with the involvement of Norwegian companies. Besides this, the approaches and fundamental theories of design thinking and reasoning, which are characteristic of these projects, were reflected against each other. In the undergraduate (year 2 systems thinking design studio, the challenge was to train students to understand how system elements are rationally interconnected with their suprasystems and subsystems based on usability and man-machine interactions. In addition to the challenges pertaining to systems thinking, collabora­tive learning and designing based on a mentorship learning concept were introduced in the Vertical Design Studio, which involved second- and third-year students. Concerning the postgraduate fourth-year strategic design projects with the industry, the challenge was to involve Norwegian companies in product planning and goal finding as well as in innovation and design activities and to assess how supportive and receptive these companies were towards radical innovation/diversification. The analysis of completed projects shows that the Norwegian industry is supportive of strategic design but is rather conservative and risk averse when it concerns accepting and implementing radical innovation initiatives. Referring to user-centred and context-based innovation, this article also supports the implementation of a systems approach to facilitate social and hierarchical learning across the second-year systems design studio, second- and third-year vertical studios, and fourth-year strategic design studio.

  19. Radioisotope Power Systems Technology Development

    Data.gov (United States)

    National Aeronautics and Space Administration — The goal of the RPS's technology portfolio is to advance performance of radioisotope power systems through new and novel innovations being developed and transitioned...

  20. Dynamical Systems for Creative Technology

    NARCIS (Netherlands)

    van Amerongen, J.

    2010-01-01

    Dynamical Systems for Creative Technology gives a concise description of the physical properties of electrical, mechanical and hydraulic systems. Emphasis is placed on modelling the dynamical properties of these systems. By using a system’s approach it is shown that a limited number of mathematical

  1. Informed Systems: Enabling Collaborative Evidence Based Organizational Learning

    Directory of Open Access Journals (Sweden)

    Mary M. Somerville

    2015-12-01

    Full Text Available Objective – In response to unrelenting disruptions in academic publishing and higher education ecosystems, the Informed Systems approach supports evidence based professional activities to make decisions and take actions. This conceptual paper presents two core models, Informed Systems Leadership Model and Collaborative Evidence-Based Information Process Model, whereby co-workers learn to make informed decisions by identifying the decisions to be made and the information required for those decisions. This is accomplished through collaborative design and iterative evaluation of workplace systems, relationships, and practices. Over time, increasingly effective and efficient structures and processes for using information to learn further organizational renewal and advance nimble responsiveness amidst dynamically changing circumstances. Methods – The integrated Informed Systems approach to fostering persistent workplace inquiry has its genesis in three theories that together activate and enable robust information usage and organizational learning. The information- and learning-intensive theories of Peter Checkland in England, which advance systems design, stimulate participants’ appreciation during the design process of the potential for using information to learn. Within a co-designed environment, intentional social practices continue workplace learning, described by Christine Bruce in Australia as informed learning enacted through information experiences. In addition, in Japan, Ikujiro Nonaka’s theories foster information exchange processes and knowledge creation activities within and across organizational units. In combination, these theories promote the kind of learning made possible through evolving and transferable capacity to use information to learn through design and usage of collaborative communication systems with associated professional practices. Informed Systems therein draws from three antecedent theories to create an original

  2. Web-Based Collaborative Publications System: R&Tserve

    Science.gov (United States)

    Abrams, Steve

    1997-01-01

    R&Tserve is a publications system based on 'commercial, off-the-shelf' (COTS) software that provides a persistent, collaborative workspace for authors and editors to support the entire publication development process from initial submission, through iterative editing in a hierarchical approval structure, and on to 'publication' on the WWW. It requires no specific knowledge of the WWW (beyond basic use) or HyperText Markup Language (HTML). Graphics and URLs are automatically supported. The system includes a transaction archive, a comments utility, help functionality, automated graphics conversion, automated table generation, and an email-based notification system. It may be configured and administered via the WWW and can support publications ranging from single page documents to multiple-volume 'tomes'.

  3. Enterprise Systems and Technology, Proceedings of the 2nd International Workshop on Enterprise Systems and Technology - I-WEST 2008

    NARCIS (Netherlands)

    Cordeiro, J.; van Sinderen, Marten J.; Shishkov, Boris

    This volume contains the proceedings of the Second International Workshop on Enterprise Systems and Technology (I-WEST 2008), held on May 23 in Enschede, The Netherlands. The I-WEST workshop is a scientific event of IICREST, the Interdisciplinary Institute for Collaboration and Research on

  4. Advanced technologies, systems, and applications

    CERN Document Server

    Avdaković, Samir

    2017-01-01

    This volume spans a wide range of technical disciplines and technologies, including complex systems, biomedical engineering, electrical engineering, energy, telecommunications, mechanical engineering, civil engineering, and computer science. The papers included in this volume were presented at the International Symposium on Innovative and Interdisciplinary Applications of Advanced Technologies (IAT), held in Neum, Bosnia and Herzegovina on June 26 and 27, 2016. This highly interdisciplinary volume is devoted to various aspects and types of systems. Systems thinking is crucial for successfully building and understanding man-made, natural, and social systems. .

  5. A collaborative approach for research paper recommender system.

    Science.gov (United States)

    Haruna, Khalid; Akmar Ismail, Maizatul; Damiasih, Damiasih; Sutopo, Joko; Herawan, Tutut

    2017-01-01

    Research paper recommenders emerged over the last decade to ease finding publications relating to researchers' area of interest. The challenge was not just to provide researchers with very rich publications at any time, any place and in any form but to also offer the right publication to the right researcher in the right way. Several approaches exist in handling paper recommender systems. However, these approaches assumed the availability of the whole contents of the recommending papers to be freely accessible, which is not always true due to factors such as copyright restrictions. This paper presents a collaborative approach for research paper recommender system. By leveraging the advantages of collaborative filtering approach, we utilize the publicly available contextual metadata to infer the hidden associations that exist between research papers in order to personalize recommendations. The novelty of our proposed approach is that it provides personalized recommendations regardless of the research field and regardless of the user's expertise. Using a publicly available dataset, our proposed approach has recorded a significant improvement over other baseline methods in measuring both the overall performance and the ability to return relevant and useful publications at the top of the recommendation list.

  6. Dynamic Appliances Scheduling in Collaborative MicroGrids System

    Science.gov (United States)

    Bilil, Hasnae; Aniba, Ghassane; Gharavi, Hamid

    2017-01-01

    In this paper a new approach which is based on a collaborative system of MicroGrids (MG’s), is proposed to enable household appliance scheduling. To achieve this, appliances are categorized into flexible and non-flexible Deferrable Loads (DL’s), according to their electrical components. We propose a dynamic scheduling algorithm where users can systematically manage the operation of their electric appliances. The main challenge is to develop a flattening function calculus (reshaping) for both flexible and non-flexible DL’s. In addition, implementation of the proposed algorithm would require dynamically analyzing two successive multi-objective optimization (MOO) problems. The first targets the activation schedule of non-flexible DL’s and the second deals with the power profiles of flexible DL’s. The MOO problems are resolved by using a fast and elitist multi-objective genetic algorithm (NSGA-II). Finally, in order to show the efficiency of the proposed approach, a case study of a collaborative system that consists of 40 MG’s registered in the load curve for the flattening program has been developed. The results verify that the load curve can indeed become very flat by applying the proposed scheduling approach. PMID:28824226

  7. Using Multitouch Collaboration Technology to Enhance Social Interaction of Children with High-Functioning Autism.

    Science.gov (United States)

    Gal, Eynat; Lamash, Liron; Bauminger-Zviely, Nirit; Zancanaro, Massimo; Weiss, Patrice L Tamar

    2016-01-01

    Children with high-functioning Autism Spectrum Disorder (HFASD) have major difficulties in social communication skills, which may impact their performance and participation in everyday life. The goal of this study was to examine whether the StoryTable, an intervention paradigm based on a collaborative narrative, multitouch tabletop interface, enhanced social interaction for children with HFASD, and to determine whether the acquired abilities were transferred to behaviors during other tasks. Fourteen boys with HFASD, aged 7-12 years, participated in a 3-week, 11-session intervention. Social interactions during two nonintervention tasks were videotaped at three points in time, one prior to the intervention (pre), a second immediately following the intervention (post) and a third three weeks after the intervention (follow-up). The video-recorded files were coded using the Friendship Observation Scale to ascertain the frequencies of positive and negative social interactions and collaborative play. Differences in these behaviors were tested for significance using nonparametric statistical tests. There were significantly higher rates of positive social interactions and collaborative play, and lower rates of negative social interactions following the intervention suggesting generalization of the social skills learned during the intervention. Improvement was maintained when tested three weeks later. These findings provide support for the use of collaborative technology-based interventions within educational settings to enhance social interaction of children with HFASD.

  8. ON EXPERIENCE OF THE COLLABORATION AND PROJECT MANAGEMENT INFORMATION SYSTEM PODIO IMPLEMENTATION IN THE MEDICAL UNIVERSITY

    Directory of Open Access Journals (Sweden)

    Andrii V. Semenets

    2014-12-01

    Full Text Available The Information Technologies role in the medical university management is analyzed. The importance of the application of the electronic document management in the medical universities is shown. The implementation capabilities of the electronic document management system within a cloud services are shown. A Podio collaboration and project management cloud service features overview is presented. The methodology of the Podio capabilities usage to the medical university task management solving is developed. An approaches to the Podio Workspaces and Applications development for the faculties collaboration and project management in the departments of the medical universities are presented. The examples of the Podio features usage to the work-flow automation of the information-analytical and hardware and software support departments of the Ternopil State Medical University named after I. Ja. Horbachevsky are shown.

  9. A Collaborative System Software Solution for Modeling Business Flows Based on Automated Semantic Web Service Composition

    Directory of Open Access Journals (Sweden)

    Ion SMEUREANU

    2009-01-01

    Full Text Available Nowadays, business interoperability is one of the key factors for assuring competitive advantage for the participant business partners. In order to implement business cooperation, scalable, distributed and portable collaborative systems have to be implemented. This article presents some of the mostly used technologies in this field. Furthermore, it presents a software application architecture based on Business Process Modeling Notation standard and automated semantic web service coupling for modeling business flow in a collaborative manner. The main business processes will be represented in a single, hierarchic flow diagram. Each element of the diagram will represent calls to semantic web services. The business logic (the business rules and constraints will be structured with the help of OWL (Ontology Web Language. Moreover, OWL will also be used to create the semantic web service specifications.

  10. Modeling learning technology systems as business systems

    NARCIS (Netherlands)

    Avgeriou, Paris; Retalis, Symeon; Papaspyrou, Nikolaos

    2003-01-01

    The design of Learning Technology Systems, and the Software Systems that support them, is largely conducted on an intuitive, ad hoc basis, thus resulting in inefficient systems that defectively support the learning process. There is now justifiable, increasing effort in formalizing the engineering

  11. Future nuclear systems technology

    International Nuclear Information System (INIS)

    Brooks, H.

    1979-01-01

    Five directions can be identified for evolution of nuclear systems, possibly a sixth. These are, first, and perhaps most important, toward a means of extending fissile resources through improvement of the efficiency of their use; second, improvements in nuclear safety; third, reduction in the environmental impacts of nuclear electric power generation, particularly water requirements; fourth, improvements in proliferation resistance of the nuclear fuel cycle; and fifth, improvements in economics. And added in a sixth, and somewhat more speculative direction, the use of nuclear power for purposes other than the direct generation of electricity

  12. Exploring teachers' use of TPACK in design talk: The collaborative design of technology-rich early literacy activities

    NARCIS (Netherlands)

    Boschman, F.B.; McKenney, Susan; Voogt, Joke

    2015-01-01

    Research shows the benefits of collaborative design activity by teachers are that in their conversations (design talk) they develop technological pedagogical content knowledge (TPACK). While more and more teachers engage in collaborative design, little is known about how they use TPACK during

  13. Exploring teachers' use of TPACK in design talk: The collaborative design of technology-rich early literacy activities

    NARCIS (Netherlands)

    Boschman, Ferry; McKenney, Susan; Voogt, Joke

    2016-01-01

    Research shows the benefits of collaborative design activity by teachers are that in their conversations (design talk) they develop technological pedagogical content knowledge (TPACK). While more and more teachers engage in collaborative design, little is known about how they use TPACK during

  14. Determinants of Teachers' Collaborative Use of Information and Communications Technology for Teaching and Learning: A European Perspective

    Science.gov (United States)

    Drossel, Kerstin; Eickelmann, Birgit; Schulz-Zander, Renate

    2017-01-01

    Collaboration between teachers constitutes an important predictor for the successful implementation of digital media in schools and teaching. The present contribution examines the supporting conditions of ICT (information and communications technology)-related teacher collaboration as a feature of school quality in six selected European…

  15. "Old Wine in Even Newer Bottles": The Uneasy Relationship between Web 2.0 Technologies and European School Collaboration

    Science.gov (United States)

    Gouseti, Anastasia

    2013-01-01

    The idea of using digital technologies and in particular web 2.0 tools to enhance school collaboration has recently been received with great enthusiasm and a range of new collaborative initiatives has emerged. Through a comparative qualitative case study of four schools in the UK and Greece, this article analyses how online tools are supporting…

  16. Knowledge Incubation and Collaboration for Science, Technology Adoption, Resourcing and Transfer (KIC-START)

    International Nuclear Information System (INIS)

    Ugbor, U.; Cilliers, A.; Kurwitz, R. C.

    2016-01-01

    Full text: In order to address the effectiveness of national networks in Member States, and to implement regional and national strategies, it is important to understand the necessary conditions that ensure successful creation and sharing of knowledge, including, effective policy and programme incentives, promoting collaboration, innovation and networking. Furthermore, Member States with aspirations to develop their nuclear programmes (power and non-power applications in agriculture, industry and health sector), need to develop their own capabilities if they are to fully benefit from the social and economic opportunities from nuclear science and technology. Ultimately nuclear innovation programmes that take into account the role of universities, education and industry would lead to a robust nuclear programme that maximizes social and economic benefit. This paper a presents an initiative for capturing best practices in the areas of university collaboration and innovation, which are driven by learning, research and entrepreneurship. The initiative covers Knowledge (creation), Innovation and Collaboration for Science and Technology Adoption, Resourcing and Transfer (KIC-START). (author

  17. 7 February 2012 - Signature of the Memorandum of Understanding between Suranaree University of Technology represented by Rector P. Suebka and the ALICE Collaboration represented by Collaboration Spokesperson P. Giubellino; Adviser E. Tsesmelis is present.

    CERN Multimedia

    Maximilien Brice

    2012-01-01

    7 February 2012 - Signature of the Memorandum of Understanding between Suranaree University of Technology represented by Rector P. Suebka and the ALICE Collaboration represented by Collaboration Spokesperson P. Giubellino; Adviser E. Tsesmelis is present.

  18. 11th October 2011 - Chinese University of Science and Technology President J. Hou signing the guest book with Adviser R. Voss; in the ATLAS visitor centre with Former Collaboration Spokesperson P. Jenni and Members of the ATLAS Chinese Collaboration.

    CERN Multimedia

    2011-01-01

    11th October 2011 - Chinese University of Science and Technology President J. Hou signing the guest book with Adviser R. Voss; in the ATLAS visitor centre with Former Collaboration Spokesperson P. Jenni and Members of the ATLAS Chinese Collaboration.

  19. The influence of audio communications technology on computer-supported collaborative learning

    Directory of Open Access Journals (Sweden)

    Denise Whitelock

    1996-12-01

    Full Text Available In recent years there has been an appreciation of the benefits that can be obtained by students working in groups or teams using computers (Eraut and Hoyles, 1988. But there is a difference in opinion as to how a partner enhances learning, and in particular how well adult learners do in the collaborative setting. In order to capitalize on the opportunities offered by new technologies, we need to understand more fully how the process of collaboration is effected by different communication technologies, and how the technologies themselves might be used to best advantage for the benefit of distance learners. However, another factor, apart from the technology itself, which is thought to influence computer-supported collaborative learning is in the gender distribution of the group. A number of classroom studies have shown gender differences when children work together with computers, and these have been reported from a number of subject-domains including science (Scanlon et al, 1993; Littleton et al, 1992. Since our own expertise is in the area of science learning, we selected a non-trivial physics task for the subjects to work with, and that is in the area of elastic collisions. Previous studies (Villani and Pacca, 1990; Whitelock et al, 1993 have shown that both adults and school-children have difficulty in predicting the subsequent motion of balls or ice pucks after they collide. Villani's study stresses that even postgraduate students tend to revert to their informal commonsense notions unless they are cued to use formal representations of these types of problem. These studies have demonstrated that the topic of elastic collisions is a complex yet fruitful one in which to engage students in group work.

  20. Water Treatment Technology - Distribution Systems.

    Science.gov (United States)

    Ross-Harrington, Melinda; Kincaid, G. David

    One of twelve water treatment technology units, this student manual on distribution systems provides instructional materials for six competencies. (The twelve units are designed for a continuing education training course for public water supply operators.) The competencies focus on the following areas: types of pipe for distribution systems, types…

  1. Innovations in technology and the online learning environment: A case study of inter-university collaboration

    Directory of Open Access Journals (Sweden)

    Jansen ZANETTA

    2010-01-01

    Full Text Available This paper presents a case study of online learning. It is based on the researcher’s participation in an inter-university collaborative module at two higher education institutions in South Africa and the United States from August to December 2001. The paper addresses the advantages and disadvantages of the online learning environment and learning in a Virtual Classroom. It provides a critical interpretation of the virtual classroom experienced in this collaboration between institutions. It finds that there are benefits from applying this technology in educational practices and programs particularly in the African context where a large majority of school-leaving learners have little or no access to higher education. However, it also expounds the NEPAD (New Partnership for Africa’s Development initiative to produce ICT in schools throughout Africa to fulfil the Millennium Development Goals on education in developing countries.

  2. Investigating the Relationship between Learning Style Preferences and Teaching Collaboration Skills and Technology

    DEFF Research Database (Denmark)

    Kim, Seung L.; Sonnenwald, Diane H.

    2002-01-01

    This paper reports on an exploratory study that investigates the relationship between participants' learning style preferences and their perceptions of a professional workshop on collaboration and technology to support collaboration. The Learning Preference Scale-Students (LPSS) (Owens & Barnes...... style, and Group 2 showed a strong preference for competitive and cooperative learning styles. Group 1 rated the workshop more positively than Group 2. However, Group 2 reported a larger increase in self-efficacy compared to those in Group 1 (18.9% vs. 6.0%). Both groups provided different suggestions...... regarding the content of the workshop. Group 1 suggested adding more discussions and group exercises, whereas Group 2 suggested adding explicit theory or rules to govern behavior. These findings indicate that learning styles should be considered as a potential variable that influences learning outcomes...

  3. The Relationship between Environmental Turbulence, Management Support, Organizational Collaboration, Information Technology Solution Realization, and Process Performance, in Healthcare Provider Organizations

    Science.gov (United States)

    Muglia, Victor O.

    2010-01-01

    The Problem: The purpose of this study was to investigate relationships between environmental turbulence, management support, organizational collaboration, information technology solution realization, and process performance in healthcare provider organizations. Method: A descriptive/correlational study of Hospital medical services process…

  4. Review & Analysis: Technological Impact on Future Air Force Personnel & Training: Distributed Collaborative Decision-Making, Volume I

    National Research Council Canada - National Science Library

    Palmer, Barbara

    1997-01-01

    ..., compared to that of a single individual. (2) The greatest detriment to collaborative distributed decision making is that we must rely on technology rather than face to face interactions, and subtleties of human communication may be lost. (3...

  5. Using collaborative technology to enhance pre-service teachers' pedagogical content knowledge in Science

    Science.gov (United States)

    Donnelly, Dermot Francis; Hume, Anne

    2015-01-01

    Background:Supporting pre-service teacher (PT) collaboration as a means of professional learning is a challenging but essential task for effective practice. However, teacher placements or practicums in schools, which is common practice within teacher education programmes, can often isolate PTs from sharing their experiences with each other. Further, the articulation of effective pedagogical practices by high-quality teachers is limited, restricting PTs' ability to access such professional knowledge. Purpose:This study investigates how the introduction of a collaborative technology, a wiki, may enhance existing and new opportunities for pre-service teachers' (PTs) to develop pedagogical content knowledge (PCK). Sample:Seven PT chemistry teachers of varied backgrounds participated in this study. Design and method:The PTs were learning to collaboratively formulate and document their early topic-specific teaching knowledge using a pedagogical tool known as Content Representation (CoRe) design. Once scaffolded into this process, the PTs continued and extended this collaborative work online through the introduction of a wiki. Data were collected for qualitative analysis through the CoRe artefacts, a semi-structured focus group interview, and PTs' reflective essays about their collaborative experiences representing their teaching knowledge in CoRes through the wiki. Results:Data analysis highlighted that while wiki use showed some potential for collaborative representation when participants were not face-to-face, the PTs were hesitant in critiquing each other's work. As such, the online representations remained relatively static without face-to-face interaction. However, developing artefacts online was favoured over established practice and the access to artefacts of their peers on the wiki enhanced PTs' consideration for their own PCK. Conclusion:Wikis show some potential in the hosting of CoRes, but issues in simultaneous posting and lack of chat functionality may

  6. FIRE PROTECTION SYSTEMS AND TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Aristov Denis Ivanovich

    2016-03-01

    Full Text Available The All-Russian Congress “Fire Stop Moscow” was de-voted to the analysis of the four segments of the industry of fire protection systems and technologies: the design of fire protec-tion systems, the latest developments and technologies of active and passive fire protection of buildings, the state and the devel-opment of the legal framework, the practice of fire protection of buildings and structures. The forum brought together the repre-sentatives of the industry of fire protection systems, scientists, leading experts, specialists in fire protection and representatives of construction companies from different regions of Russia. In parallel with the Congress Industrial Exhibition of fire protection systems, materials and technology was held, where manufacturers presented their products. The urgency of the “Fire Stop Moscow” Congress in 2015 organized by the Congress Bureau ODF Events lies primarily in the fact that it considered the full range of issues related to the fire protection of building and construction projects; studied the state of the regulatory framework for fire safety and efficiency of public services, research centers, private companies and busi-nesses in the area of fire safety. The main practical significance of the event which was widely covered in the media space, was the opportunity to share the views and information between management, science, and practice of business on implementing fire protection systems in the conditions of modern economic relations and market realities. : congress, fire protection, systems, technologies, fire protection systems, exhibition

  7. A Web-based Tool for Transparent, Collaborative Urban Water System Planning for Monterrey, Mexico

    Science.gov (United States)

    Rheinheimer, D. E.; Medellin-Azuara, J.; Garza Díaz, L. E.; Ramírez, A. I.

    2017-12-01

    Recent rapid advances in web technologies and cloud computing show great promise for facilitating collaboration and transparency in water planning efforts. Water resources planning is increasingly in the context of a rapidly urbanizing world, particularly in developing countries. In such countries with democratic traditions, the degree of transparency and collaboration in water planning can mean the difference between success and failure of water planning efforts. This is exemplified in the city of Monterrey, Mexico, where an effort to build a new long-distance aqueduct to increase water supply to the city dramatically failed due to lack of transparency and top-down planning. To help address, we used a new, web-based water system modeling platform, called OpenAgua, to develop a prototype decision support system for water planning in Monterrey. OpenAgua is designed to promote transparency and collaboration, as well as provide strong, cloud-based, water system modeling capabilities. We developed and assessed five water management options intended to increase water supply yield and/or reliability, a dominant water management concern in Latin America generally: 1) a new long-distance source (the previously-rejected project), 2) a new nearby reservoir, 3) expansion/re-operation of an existing major canal, 4) desalination, and 5) industrial water reuse. Using the integrated modeling and analytic capabilities of OpenAgua, and some customization, we assessed the performance of these options for water supply yield and reliability to help identify the most promising ones. In presenting this assessment, we demonstrate the viability of using online, cloud-based modeling systems for improving transparency and collaboration in decision making, reducing the gap between citizens, policy makers and water managers, and future directions.

  8. THE INFORMATIONAL SYSTEM FOR THE COLLABORATIVE LOGISTICS NETWORKS

    Directory of Open Access Journals (Sweden)

    NAIANA ŢARCĂ

    2011-01-01

    Full Text Available This paper presents an informatic system designed for collaborative logistic networks. The informational system is composed of structured informational modules that can easily be modified in order to facilitate the testing of the different algorithms that are being used. The informational system has two components, in the form of web application modules, which are connected to the user-specific modules (THE CLIENT WEB APPLICATION and to the server-specific modules (THE SERVER WEB APPLICATION, respectively. These two modules operate the transmission of information, the demands of the client and the offers generated by the server. The designed informational system has been tested in actual operating conditions, by co-optating ten EMSs from the Bihor county area. Some of the elements considered positive by the users, in the testing period, were: usability, the automatic assignment of a motor vehicle according to the characteristics of the product, the automatic route generation, the selection of goods according to the cluster “route” of the system.

  9. Supporting Problem Solving with Case-Stories Learning Scenario and Video-based Collaborative Learning Technology

    Directory of Open Access Journals (Sweden)

    Chun Hu

    2004-04-01

    Full Text Available In this paper, we suggest that case-based resources, which are used for assisting cognition during problem solving, can be structured around the work of narratives in social cultural psychology. Theories and other research methods have proposed structures within narratives and stories which may be useful to the design of case-based resources. Moreover, embedded within cases are stories which are contextually rich, supporting the epistemological groundings of situated cognition. Therefore the purposes of this paper are to discuss possible frameworks of case-stories; derive design principles as to “what” constitutes a good case story or narrative; and suggest how technology can support story-based learning. We adopt video-based Computer-Supported Collaborative Learning (CSCL technology to support problem solving with case-stories learning scenarios. Our hypothesis in this paper is that well-designed case-based resources are able to aid in the cognitive processes undergirding problem solving and meaning making. We also suggest the use of an emerging video-based collaborative learning technology to support such an instructional strategy.

  10. [Health-related scientific and technological capabilities and university-industry research collaboration].

    Science.gov (United States)

    Britto, Jorge; Vargas, Marco Antônio; Gadelha, Carlos Augusto Grabois; Costa, Laís Silveira

    2012-12-01

    To examine recent developments in health-related scientific capabilities, the impact of lines of incentives on reducing regional scientific imbalances, and university-industry research collaboration in Brazil. Data were obtained from the Conselho Nacional de Desenvolvimento Científico e Tecnológico (Brazilian National Council for Scientific and Technological Development) databases for the years 2000 to 2010. There were assessed indicators of resource mobilization, research network structuring, and knowledge transfer between science and industry initiatives. Based on the regional distribution map of health-related scientific and technological capabilities there were identified patterns of scientific capabilities and science-industry collaboration. There was relative spatial deconcentration of health research groups and more than 6% of them worked in six areas of knowledge areas: medicine, collective health, dentistry, veterinary medicine, ecology and physical education. Lines of incentives that were adopted from 2000 to 2009 contributed to reducing regional scientific imbalances and improving preexisting capabilities or, alternatively, encouraging spatial decentralization of these capabilities. Health-related scientific and technological capabilities remain highly spatially concentrated in Brazil and incentive policies have contributed to reduce to some extent these imbalances.

  11. Study of Collaborative Management for Transportation Construction Project Based on BIM Technology

    Science.gov (United States)

    Jianhua, Liu; Genchuan, Luo; Daiquan, Liu; Wenlei, Li; Bowen, Feng

    2018-03-01

    Abstract. Building Information Modeling(BIM) is a building modeling technology based on the relevant information data of the construction project. It is an advanced technology and management concept, which is widely used in the whole life cycle process of planning, design, construction and operation. Based on BIM technology, transportation construction project collaborative management can have better communication through authenticity simulation and architectural visualization and can obtain the basic and real-time information such as project schedule, engineering quality, cost and environmental impact etc. The main services of highway construction management are integrated on the unified BIM platform for collaborative management to realize information intercommunication and exchange, to change the isolated situation of information in the past, and improve the level of information management. The final BIM model is integrated not only for the information management of project and the integration of preliminary documents and design drawings, but also for the automatic generation of completion data and final accounts, which covers the whole life cycle of traffic construction projects and lays a good foundation for smart highway construction.

  12. Patterns in Standards and Technologies for Economic Information Systems Interoperability

    Directory of Open Access Journals (Sweden)

    Vasile Irimia

    2012-06-01

    Full Text Available This paper presets results from a review of the current standards used for collaboration between economic information systems, including web services and service oriented architecture, EDI, ebXML framework, RosettaNet framework, cXML, xCBL UBL, BPMN, BPEL, WS-CDL, ASN.1, and others. Standards have a key role in promoting economic information system interoperability, and thus enable collaboration. Analyzing the current standards, technologies and applications used for economic information systems interoperability has revealed a common pattern that runs through all of them. From this pattern we construct a basic model of interoperability around which we relate and judge all standards, technologies and applications for economic information systems interoperability.

  13. A web-based, collaborative modeling, simulation, and parallel computing environment for electromechanical systems

    Directory of Open Access Journals (Sweden)

    Xiaoliang Yin

    2015-03-01

    Full Text Available Complex electromechanical system is usually composed of multiple components from different domains, including mechanical, electronic, hydraulic, control, and so on. Modeling and simulation for electromechanical system on a unified platform is one of the research hotspots in system engineering at present. It is also the development trend of the design for complex electromechanical system. The unified modeling techniques and tools based on Modelica language provide a satisfactory solution. To meet with the requirements of collaborative modeling, simulation, and parallel computing for complex electromechanical systems based on Modelica, a general web-based modeling and simulation prototype environment, namely, WebMWorks, is designed and implemented. Based on the rich Internet application technologies, an interactive graphic user interface for modeling and post-processing on web browser was implemented; with the collaborative design module, the environment supports top-down, concurrent modeling and team cooperation; additionally, service-oriented architecture–based architecture was applied to supply compiling and solving services which run on cloud-like servers, so the environment can manage and dispatch large-scale simulation tasks in parallel on multiple computing servers simultaneously. An engineering application about pure electric vehicle is tested on WebMWorks. The results of simulation and parametric experiment demonstrate that the tested web-based environment can effectively shorten the design cycle of the complex electromechanical system.

  14. Towards collaborative filtering recommender systems for tailored health communications.

    Science.gov (United States)

    Marlin, Benjamin M; Adams, Roy J; Sadasivam, Rajani; Houston, Thomas K

    2013-01-01

    The goal of computer tailored health communications (CTHC) is to promote healthy behaviors by sending messages tailored to individual patients. Current CTHC systems collect baseline patient "profiles" and then use expert-written, rule-based systems to target messages to subsets of patients. Our main interest in this work is the study of collaborative filtering-based CTHC systems that can learn to tailor future message selections to individual patients based explicit feedback about past message selections. This paper reports the results of a study designed to collect explicit feedback (ratings) regarding four aspects of messages from 100 subjects in the smoking cessation support domain. Our results show that most users have positive opinions of most messages and that the ratings for all four aspects of the messages are highly correlated with each other. Finally, we conduct a range of rating prediction experiments comparing several different model variations. Our results show that predicting future ratings based on each user's past ratings contributes the most to predictive accuracy.

  15. Multiple Interests of Users in Collaborative Tagging Systems

    Science.gov (United States)

    Au Yeung, Ching-Man; Gibbins, Nicholas; Shadbolt, Nigel

    Performance of recommender systems depends on whether the user profiles contain accurate information about the interests of the users, and this in turn relies on whether enough information about their interests can be collected. Collaborative tagging systems allow users to use their own words to describe their favourite resources, resulting in some user-generated categorisation schemes commonly known as folksonomies. Folksonomies thus contain rich information about the interests of the users, which can be used to support various recommender systems. Our analysis of the folksonomy in Delicious reveals that the interests of a single user can be very diverse. Traditional methods for representing interests of users are usually not able to reflect such diversity. We propose a method to construct user profiles of multiple interests from folksonomies based on a network clustering technique. Our evaluation shows that the proposed method is able to generate user profiles which reflect the diversity of user interests and can be used as a basis of providing more focused recommendation to the users.

  16. Robust collaborative services interactions under system crashes and network failures

    NARCIS (Netherlands)

    Wang, Lei

    2015-01-01

    Electronic collaboration has grown significantly in the last decade, with applications in many different areas such as shopping, trading, and logistics. Often electronic collaboration is based on automated business processes managed by different companies and connected through the Internet. Such a

  17. An Approach for Autonomy: A Collaborative Communication Framework for Multi-Agent Systems

    Science.gov (United States)

    Dufrene, Warren Russell, Jr.

    2005-01-01

    Research done during the last three years has studied the emersion properties of Complex Adaptive Systems (CAS). The deployment of Artificial Intelligence (AI) techniques applied to remote Unmanned Aerial Vehicles has led the author to investigate applications of CAS within the field of Autonomous Multi-Agent Systems. The core objective of current research efforts is focused on the simplicity of Intelligent Agents (IA) and the modeling of these agents within complex systems. This research effort looks at the communication, interaction, and adaptability of multi-agents as applied to complex systems control. The embodiment concept applied to robotics has application possibilities within multi-agent frameworks. A new framework for agent awareness within a virtual 3D world concept is possible where the vehicle is composed of collaborative agents. This approach has many possibilities for applications to complex systems. This paper describes the development of an approach to apply this virtual framework to the NASA Goddard Space Flight Center (GSFC) tetrahedron structure developed under the Autonomous Nano Technology Swarm (ANTS) program and the Super Miniaturized Addressable Reconfigurable Technology (SMART) architecture program. These projects represent an innovative set of novel concepts deploying adaptable, self-organizing structures composed of many tetrahedrons. This technology is pushing current applied Agents Concepts to new levels of requirements and adaptability.

  18. Information technology as a facilitator of suppliers’ collaborative communication, network governance and relationship longevity in supply chains

    Directory of Open Access Journals (Sweden)

    Richard Chinomona

    2013-08-01

    Full Text Available There is an increasing awareness about the paramount importance of information technology within business in the context of large businesses. However, research about the investigation of the role of information technology resources in fostering collaborative communication, network governance and relationship longevity in the small and medium enterprise sector has remained scant. The primary objective of this study was to investigate the influence of information technology on collaborative communication, network governance and relationship longevity in Zimbabwe’s SME sector. Five research hypotheses were posited and sample data from 162 small and medium enterprise suppliers were collected and used to empirically test the hypotheses. The results of this study showed that information technology resources positively influenced small and medium enterprise suppliers’ collaborative communication, network governance and consequential relationship longevity with their buyers in a significant way. Overall, the current study findings provided tentative support to the proposition that information technology resources, collaborative communication and network governance should be recognised as significant antecedents for improved relationship longevity between suppliers and their buyers in the SME setting. Therefore, managers in the small and medium enterprise sector and small and medium enterprise owners need to pay attention to both collaborative communication and network governance in order to optimise information technology resource impact on their relationship longevity with their business counterparts. Limitations and future research directions were also indicated.

  19. Slow Control System for the NIFFTE Collaboration TPC

    Science.gov (United States)

    Ringle, Erik; Niffte Collaboration Collaboration

    2011-10-01

    As world energy concerns continue to dominate public policy in the 21st century, the need for cleaner and more efficient nuclear power is necessary. In order to effectively design and implement plans for generation IV nuclear reactors, more accurate fission cross-section measurements are necessary. The Neutron Induced Fission Fragment Tracking Experiment (NIFFTE) collaboration, in an effort to meet this need, has constructed a Time Projection Chamber (TPC) which aims to reduce the uncertainty of the fission cross-section to less than 1%. Using the Maximum Integration Data Acquisition System (MIDAS) framework, slow control measurements are integrated into a single interface to facilitate off-site monitoring. The Hart Scientific 1560 Black Stack will be used with two 2564 Thermistor Scanner Modules to monitor internal temperature of the TPC. A Prologix GPIB to Ethernet controller will be used to interface the hardware with MIDAS. This presentation will detail the design and implementation of the slow control system for the TPC. This work was supported by the U.S. Department of Energy Division of Energy Research.

  20. A Timed Colored Petri Net Simulation-Based Self-Adaptive Collaboration Method for Production-Logistics Systems

    Directory of Open Access Journals (Sweden)

    Zhengang Guo

    2017-03-01

    Full Text Available Complex and customized manufacturing requires a high level of collaboration between production and logistics in a flexible production system. With the widespread use of Internet of Things technology in manufacturing, a great amount of real-time and multi-source manufacturing data and logistics data is created, that can be used to perform production-logistics collaboration. To solve the aforementioned problems, this paper proposes a timed colored Petri net simulation-based self-adaptive collaboration method for Internet of Things-enabled production-logistics systems. The method combines the schedule of token sequences in the timed colored Petri net with real-time status of key production and logistics equipment. The key equipment is made ‘smart’ to actively publish or request logistics tasks. An integrated framework based on a cloud service platform is introduced to provide the basis for self-adaptive collaboration of production-logistics systems. A simulation experiment is conducted by using colored Petri nets (CPN Tools to validate the performance and applicability of the proposed method. Computational experiments demonstrate that the proposed method outperforms the event-driven method in terms of reductions of waiting time, makespan, and electricity consumption. This proposed method is also applicable to other manufacturing systems to implement production-logistics collaboration.

  1. Successful Implementation of a Computer-Supported Collaborative Learning System in Teaching E-Commerce

    Science.gov (United States)

    Ngai, E. W. T.; Lam, S. S.; Poon, J. K. L.

    2013-01-01

    This paper describes the successful application of a computer-supported collaborative learning system in teaching e-commerce. The authors created a teaching and learning environment for 39 local secondary schools to introduce e-commerce using a computer-supported collaborative learning system. This system is designed to equip students with…

  2. Network speech systems technology program

    Science.gov (United States)

    Weinstein, C. J.

    1981-09-01

    This report documents work performed during FY 1981 on the DCA-sponsored Network Speech Systems Technology Program. The two areas of work reported are: (1) communication system studies in support of the evolving Defense Switched Network (DSN) and (2) design and implementation of satellite/terrestrial interfaces for the Experimental Integrated Switched Network (EISN). The system studies focus on the development and evaluation of economical and endurable network routing procedures. Satellite/terrestrial interface development includes circuit-switched and packet-switched connections to the experimental wideband satellite network. Efforts in planning and coordination of EISN experiments are reported in detail in a separate EISN Experiment Plan.

  3. A Collaborative Approach to Helping Teacher Education Faculty Model Technology Integration in Their Courses: An Informal Case.

    Science.gov (United States)

    Zachariades, Iacovos; Roberts, Sherron Killingsworth

    1995-01-01

    Describes an innovative and collaborative approach to helping teacher educators better prepare preservice teachers to utilize technology for effective instruction. A mentoring program that paired graduate students in instructional technology with interested faculty members is discussed, and attitudes of the mentors and the faculty members are…

  4. Collaborative strategies in the event of technological discontinuities : the case of Nokia in the mobile telecommunication Industry

    NARCIS (Netherlands)

    Sadowski, B.M.; Dittrich, K.; Duysters, G.M.

    2003-01-01

    The paper examines the extent to which collaboration between large and small companies has been able to deal with the effects of discontinuous technological change. In applying an evolutionary perspective, the paper examines the process by which technological competencies and resources of large

  5. Technological progress and effects of (supra) regional innovation and production collaboration. An agent-based model simulation study.

    NARCIS (Netherlands)

    Vermeulen, B.; Pyka, A.; Serguieva, A.; Maringer, D.; Palade, V.; Almeida, R.J.

    2014-01-01

    We provide a novel technology development model in which economic agents search for transformations to build artifacts. Using this technology development model, we conduct an agent-based model simulation study on the effect of (supra-)regional collaboration in production and innovation on

  6. It Takes a Village to Raise an Information Technology Project: Suggestions on Collaboration from Our 10-Community-College Consortium

    Science.gov (United States)

    Grandgenett, Neal; Thiele, Levi; Pensabene, Tom; McPeak, Brad

    2015-01-01

    This article describes the collaborative evolution of the Midwest Center for Information Technology (MCIT)--which is a consortium of 10 different community colleges across the four states of Nebraska, Iowa, North Dakota, and South Dakota--that was established to improve information technology (IT) education across the region. MCIT has been funded…

  7. Exploring the Factors That Affect the Intention to Use Collaborative Technologies: The Differing Perspectives of Sequential/Global Learners

    Science.gov (United States)

    Huang, Yong-Ming

    2015-01-01

    The use of collaborative technologies in learning has received considerable attention in recent years, but few studies to date have examined the factors that affect sequential and global learners' intention to use such technologies. Previous studies have shown that the learners of different learning styles have different needs for educational…

  8. Synthesis of Collaborative Learning Processes with Technology Based Education to Enhance Classroom Teaching

    Science.gov (United States)

    Ghosh, Sumit

    2016-07-01

    A major hurdle in school education in India is the presence of large number of teachers who are inexperienced and have merely taken up the profession of teaching only after exhausting all avenues or getting rejected from all quarters. Empowering and training such teachers with information is a herculean task. Students tend to pay attention and show enthusiasm in learning when they view the class as relevant to themselves and connected to their interests. The current teaching-learning methods for teaching science and astronomy have become obsolete and require a major overhaul. A teaching-learning process which concentrates on an explorative-collaborative-comprehending methodology with simultaneous combination of technology has been developed with the objective to reignite the scientific temper among the future budding scientists. Attaining this goal will be possible when instructors adopt a bottom-up approach, which involves understanding the student's needs, designing flexible course content and synchronizing teaching techniques that focus on increasing student engagement by making the learning experience meaningful and purposeful. The International Year of Light (IYL 2015) is a global initiative that highlights to the citizens of the world the importance of light and optical technologies in their lives, for their futures, and for the development of society. One of the strong legacies left by the 2009 International Year of Astronomy was to use Astronomy in making the world a better place. On the eve of IYL 2015, an Optical Society funded outreach program, 'Spark of Light' was organised for under-privileged school children by using the explorative-collaborative-technology based mechanism and make them understand the nature and properties of light with emphasis on how Astronomy has been crucial for the evolution of sophisticated technology. A major paradigm shift from our previous program was the engagement of such untrained teachers in each and every aspect of

  9. Organization of Biomedical Data for Collaborative Scientific Research: A Research Information Management System.

    Science.gov (United States)

    Myneni, Sahiti; Patel, Vimla L

    2010-06-01

    Biomedical researchers often work with massive, detailed and heterogeneous datasets. These datasets raise new challenges of information organization and management for scientific interpretation, as they demand much of the researchers' time and attention. The current study investigated the nature of the problems that researchers face when dealing with such data. Four major problems identified with existing biomedical scientific information management methods were related to data organization, data sharing, collaboration, and publications. Therefore, there is a compelling need to develop an efficient and user-friendly information management system to handle the biomedical research data. This study evaluated the implementation of an information management system, which was introduced as part of the collaborative research to increase scientific productivity in a research laboratory. Laboratory members seemed to exhibit frustration during the implementation process. However, empirical findings revealed that they gained new knowledge and completed specified tasks while working together with the new system. Hence, researchers are urged to persist and persevere when dealing with any new technology, including an information management system in a research laboratory environment.

  10. Collaboration Among Institutions to Bring Geospatial Technology to an Underserved Rural Region

    Science.gov (United States)

    Johnson, T.

    2012-12-01

    The University of Maine at Machias and Washington County Community College, the two smallest and most remote public institutions in Maine, provide important education and workforce development services in a rural and economically-challenged region. Through an innovative collaboration supported by the National Science Foundation, the two institutions have developed geospatial technology (GST) programs designed to meet the specific workforce needs of the region, affording students with the opportunity to pursue degrees, certificates and minors. Prior to this effort, neither school had the resources to maintain a GST laboratory or to offer courses consistently. The region had almost no GST capacity with which to manage critical environmental resources and grapple with economic, public safety, and public health challenges. Several statewide studies had shown a growing need for more GST technicians and training for incumbent workers. The new programs are designed to produce a small number of specialist technicians with associate's degrees and a large number of ancillary users with significant GST expertise from courses, certificates or minors. Course content is shaped by workforce research in Maine and elsewhere, and all courses are offered in either blended, online or short-term intensive formats to provide access to incumbent workers and extend the geographic reach of the programs. Through the university's Geographic Information Systems (GIS) Service Center, students from both institutions engage in real-world projects, and are linked with employers via internships. This has the added plus of providing low-cost and no-cost GIS services to area clients, generating demand. Many of these projects and internships lead to work for graduates, even through the economic downturn. By creating courses that serve multiple audiences, each contributing a small number to the total enrollment, the programs constitute a sustainable model that serves the growing needs of the region

  11. Nanoscale technology in biological systems

    CERN Document Server

    Greco, Ralph S; Smith, R Lane

    2004-01-01

    Reviewing recent accomplishments in the field of nanobiology Nanoscale Technology in Biological Systems introduces the application of nanoscale matrices to human biology. It focuses on the applications of nanotechnology fabrication to biomedical devices and discusses new physical methods for cell isolation and manipulation and intracellular communication at the molecular level. It also explores the application of nanobiology to cardiovascular diseases, oncology, transplantation, and a range of related disciplines. This book build a strong background in nanotechnology and nanobiology ideal for

  12. The State-of-the-Art of Collaborative Technologies for Initial Vocational Education: A Systematic Literature Review

    Directory of Open Access Journals (Sweden)

    Beat A. Schwendimann

    2018-04-01

    Full Text Available Future workplaces require collaboration skills in which members of different work communities use technologies to solve complex problems. Vocational education and training (VET programs need to meet the challenge to prepare students to be part of a competent workforce. Particularly initial vocational education is under pressure to develop learners’ collaboration skills and abilities. To date, however, no attempt has been made to perform a comprehensive review of the use of computer-supported collaborative learning (CSCL technologies across different vocational education settings to account for contextual factors of VET. In this systematic review, 26 published studies were analyzed with respect to their demographics, research methodology, use of technology, and measured outcomes. This review illuminates that research on CSCL still leaves the vocational learning context as an under-represented field of study. At the same time, technologies offer a range of new types of learning possibilities for vocational education. As the direct result of that development, vocational education is increasingly taking place in new technology-enhanced learning settings. Education can benefit from the opportunities of CSCL technologies, but on the other hand, such technologies create new challenges for facilitating vocational learning. Therefore, this review also identifies three topic areas specific to vocational learning (collaborative writing-to-learn, simulations and game-like solutions, and tangible objects and enumerates desirable lines for future research.

  13. Biometric Technologies and Verification Systems

    CERN Document Server

    Vacca, John R

    2007-01-01

    Biometric Technologies and Verification Systems is organized into nine parts composed of 30 chapters, including an extensive glossary of biometric terms and acronyms. It discusses the current state-of-the-art in biometric verification/authentication, identification and system design principles. It also provides a step-by-step discussion of how biometrics works; how biometric data in human beings can be collected and analyzed in a number of ways; how biometrics are currently being used as a method of personal identification in which people are recognized by their own unique corporal or behavior

  14. Collaborative technologies, higher order thinking and self-sufficient learning: A case study of adult learners

    Directory of Open Access Journals (Sweden)

    Clare S. Johnson

    2017-07-01

    Full Text Available The inclusion of online elements in learning environments is becoming commonplace in Post Compulsory Education. A variety of research into the value of such elements is available, and this study aims to add further evidence by looking specifically at the use of collaborative technologies such as online discussion forums and wikis to encourage higher order thinking and self-sufficient learning. In particular, the research examines existing pedagogical models including Salmon’s five-stage model, along with other relevant literature. A case study of adult learners in community-based learning centres forms the basis of the research, and as a result of the findings, an arrow model is suggested as a framework for online collaboration that emphasises the learner, mentions pre-course preparation and then includes three main phases of activity: post, interact and critique. This builds on Salmon’s five-stage model and has the benefit of being flexible and responsive, as well as allowing for further development beyond the model, particularly in a blended learning environment.

  15. South African Teachers' Views of Collaboration within an Inclusive Education System

    Science.gov (United States)

    Nel, Mirna; Engelbrecht, Petra; Nel, Norma; Tlale, Dan

    2014-01-01

    The development of sustainable collaborative partnerships between different role players within an inclusive education system seems to be a continuous challenge in South Africa. The focus of this research study was to understand how teachers view collaboration within an inclusive education system. Open-ended questionnaires were completed by 85…

  16. Very Large Data Volumes Analysis of Collaborative Systems with Finite Number of States

    Science.gov (United States)

    Ivan, Ion; Ciurea, Cristian; Pavel, Sorin

    2010-01-01

    The collaborative system with finite number of states is defined. A very large database is structured. Operations on large databases are identified. Repetitive procedures for collaborative systems operations are derived. The efficiency of such procedures is analyzed. (Contains 6 tables, 5 footnotes and 3 figures.)

  17. Intelligent Systems Technologies for Ops

    Science.gov (United States)

    Smith, Ernest E.; Korsmeyer, David J.

    2012-01-01

    As NASA supports International Space Station assembly complete operations through 2020 (or later) and prepares for future human exploration programs, there is additional emphasis in the manned spaceflight program to find more efficient and effective ways of providing the ground-based mission support. Since 2006 this search for improvement has led to a significant cross-fertilization between the NASA advanced software development community and the manned spaceflight operations community. A variety of mission operations systems and tools have been developed over the past decades as NASA has operated the Mars robotic missions, the Space Shuttle, and the International Space Station. NASA Ames Research Center has been developing and applying its advanced intelligent systems research to mission operations tools for both unmanned Mars missions operations since 2001 and to manned operations with NASA Johnson Space Center since 2006. In particular, the fundamental advanced software development work under the Exploration Technology Program, and the experience and capabilities developed for mission operations systems for the Mars surface missions, (Spirit/Opportunity, Phoenix Lander, and MSL) have enhanced the development and application of advanced mission operation systems for the International Space Station and future spacecraft. This paper provides an update on the status of the development and deployment of a variety of intelligent systems technologies adopted for manned mission operations, and some discussion of the planned work for Autonomous Mission Operations in future human exploration. We discuss several specific projects between the Ames Research Center and the Johnson Space Centers Mission Operations Directorate, and how these technologies and projects are enhancing the mission operations support for the International Space Station, and supporting the current Autonomous Mission Operations Project for the mission operation support of the future human exploration

  18. Creation of medicinal chemistry learning communities through enhanced technology and interdisciplinary collaboration.

    Science.gov (United States)

    Henriksen, Brian; Roche, Victoria

    2012-10-12

    Objectives. To build an integrated medicinal chemistry learning community of campus and distance pharmacy students though the use of innovative technology and interdisciplinary teaching.Design. Mechanisms were implemented to bring distance students into campus-based medicinal chemistry classrooms in real time, stimulate interaction between instructors and various student cohorts, and promote group work during class. Also, pharmacy clinician colleagues were recruited to contribute to the teaching of the 3 medicinal chemistry courses.Assessment. Student perceptions on the value of technology to build community and advance learning were gleaned from course evaluations, in class feedback, and conversations with class officers and student groups. Responses on a survey of second-year students confirmed the benefits of interdisciplinary content integration on engagement and awareness of the connection between drug chemistry and pharmacy practice. A survey of clinician colleagues who contributed to teaching the 3 medicinal chemistry courses found their views were similar to those of students.Conclusions. The purposeful use of technology united learners, fostered communication, and advanced content comprehension in 3 medicinal chemistry courses taught to campus and distance students. Teaching collaboration with pharmacy clinicians enhanced learner interest in course content and provided insight into the integrated nature of the profession of pharmacy.

  19. Student use of a Learning Management System for group projects: A case study investigating interaction, collaboration, and knowledge construction

    Science.gov (United States)

    Lonn, Steven D.

    Web-based Learning Management Systems (LMS) allow instructors and students to share instructional materials, make class announcements, submit and return course assignments, and communicate with each other online. Previous LMS-related research has focused on how these systems deliver and manage instructional content with little concern for how students' constructivist learning can be encouraged and facilitated. This study investigated how students use LMS to interact, collaborate, and construct knowledge within the context of a group project but without mediation by the instructor. The setting for this case study was students' use in one upper-level biology course of the local LMS within the context of a course-related group project, a mock National Institutes of Health grant proposal. Twenty-one groups (82 students) voluntarily elected to use the LMS, representing two-thirds of all students in the course. Students' peer-to-peer messages within the LMS, event logs, online surveys, focus group interviews, and instructor interviews were used in order to answer the study's overarching research question. The results indicate that students successfully used the LMS to interact and, to a significant extent, collaborate, but there was very little evidence of knowledge construction using the LMS technology. It is possible that the ease and availability of face-to-face meetings as well as problems and limitations with the technology were factors that influenced whether students' online basic interaction could be further distinguished as collaboration or knowledge construction. Despite these limitations, students found several tools and functions of the LMS useful for their online peer interaction and completion of their course project. Additionally, LMS designers and implementers are urged to consider previous literature on computer-supported collaborative learning environments in order to better facilitate independent group projects within these systems. Further research is

  20. Ubuntunet Alliance: A Collaborative Research Platform for Sharing of Technological Tools for Eradication of Brain Drain

    Directory of Open Access Journals (Sweden)

    Jameson Mbale

    2012-12-01

    Full Text Available The UbuntuNet Alliance Alliance is well-placed to facilitate interaction between education and research institutions and the African academic and researcher in the Diaspora so that together they can strengthen research that will exploit new technological tools and increase the industrial base. It is envisaged that the Alliance will become an important vehicle for linkages that will facilitate repatriation of scientific knowledge and skills to Africa and even help reduce and eventually eradicate the brain drain which has taken so many excellent intellectuals to the developed world. As organisational vehicles for inter-institutional collaboration both established and emerging NRENs can play a critical role in reversing these trends and in mitigating what appears to be the negative impact of the brain drain.

  1. Supporting primary-level mathematics teachers’ collaboration in designing and using technology-based scenarios

    DEFF Research Database (Denmark)

    Misfeldt, Morten; Zacho, Lis

    2016-01-01

    development and testing through qualitative means, aiming to describe the teachers’ appropriation of (1) GeoGebra as a tool for doing and teaching mathematics, and (2) game as a metaphor supporting open-ended projects addressing creativity and innovation in the classroom. The data from the project suggest......In this article, we address how the design of educational scenarios can support teachers’ adoption of both technology and open-ended projects indorsing creativity and innovation. We do that by describing how groups of teachers develop digital learning environments supporting using a combination...... of GeoGebra and Google sites. Both teachers and pupils work with the concept of “game” as something they design, and furthermore, the pupils immerse themselves into the scenarios that the teachers create in a way similar to “playing a game.” We investigate teachers participation in collaborative...

  2. Study of cognitive and technological prerequisites for virtual laboratories and collaborative virtual environments for radiopharmacy

    International Nuclear Information System (INIS)

    Melo, Roberto Correia de

    2009-01-01

    This academic work explains a general view of virtual laboratories (VL) and collaborative virtual environments (CVE) (called, together, a VL/CVE set), focusing their technological features and analyzing the common cognitive features of their users. Also is presented a detailed description of VL/CVE VirRAD (Virtual Radiopharmacy), created specially to connect and support the international radiopharmacy community around the world, and is explained an analysis of their users' cognitive profile, under the perspective of two of the most important cognitive theories of the 20th century: multiple intelligences, by Howard Gardner, and mindful learning, by Ellen Langer. Conclusions from this study has been incorporated, as feature enhancements, to a software prototype created based upon VirRAD software solution, and the hardcopy of their screens is exposed at the end of this work. It is also an essential idea that the conclusions of this work are relevant to any VL/CVE environment. (author)

  3. Quantum technologies with hybrid systems

    Science.gov (United States)

    Kurizki, Gershon; Bertet, Patrice; Kubo, Yuimaru; Mølmer, Klaus; Petrosyan, David; Rabl, Peter; Schmiedmayer, Jörg

    2015-03-01

    An extensively pursued current direction of research in physics aims at the development of practical technologies that exploit the effects of quantum mechanics. As part of this ongoing effort, devices for quantum information processing, secure communication, and high-precision sensing are being implemented with diverse systems, ranging from photons, atoms, and spins to mesoscopic superconducting and nanomechanical structures. Their physical properties make some of these systems better suited than others for specific tasks; thus, photons are well suited for transmitting quantum information, weakly interacting spins can serve as long-lived quantum memories, and superconducting elements can rapidly process information encoded in their quantum states. A central goal of the envisaged quantum technologies is to develop devices that can simultaneously perform several of these tasks, namely, reliably store, process, and transmit quantum information. Hybrid quantum systems composed of different physical components with complementary functionalities may provide precisely such multitasking capabilities. This article reviews some of the driving theoretical ideas and first experimental realizations of hybrid quantum systems and the opportunities and challenges they present and offers a glance at the near- and long-term perspectives of this fascinating and rapidly expanding field.

  4. Quantum technologies with hybrid systems

    Science.gov (United States)

    Kurizki, Gershon; Bertet, Patrice; Kubo, Yuimaru; Mølmer, Klaus; Petrosyan, David; Rabl, Peter; Schmiedmayer, Jörg

    2015-01-01

    An extensively pursued current direction of research in physics aims at the development of practical technologies that exploit the effects of quantum mechanics. As part of this ongoing effort, devices for quantum information processing, secure communication, and high-precision sensing are being implemented with diverse systems, ranging from photons, atoms, and spins to mesoscopic superconducting and nanomechanical structures. Their physical properties make some of these systems better suited than others for specific tasks; thus, photons are well suited for transmitting quantum information, weakly interacting spins can serve as long-lived quantum memories, and superconducting elements can rapidly process information encoded in their quantum states. A central goal of the envisaged quantum technologies is to develop devices that can simultaneously perform several of these tasks, namely, reliably store, process, and transmit quantum information. Hybrid quantum systems composed of different physical components with complementary functionalities may provide precisely such multitasking capabilities. This article reviews some of the driving theoretical ideas and first experimental realizations of hybrid quantum systems and the opportunities and challenges they present and offers a glance at the near- and long-term perspectives of this fascinating and rapidly expanding field. PMID:25737558

  5. Quantum technologies with hybrid systems.

    Science.gov (United States)

    Kurizki, Gershon; Bertet, Patrice; Kubo, Yuimaru; Mølmer, Klaus; Petrosyan, David; Rabl, Peter; Schmiedmayer, Jörg

    2015-03-31

    An extensively pursued current direction of research in physics aims at the development of practical technologies that exploit the effects of quantum mechanics. As part of this ongoing effort, devices for quantum information processing, secure communication, and high-precision sensing are being implemented with diverse systems, ranging from photons, atoms, and spins to mesoscopic superconducting and nanomechanical structures. Their physical properties make some of these systems better suited than others for specific tasks; thus, photons are well suited for transmitting quantum information, weakly interacting spins can serve as long-lived quantum memories, and superconducting elements can rapidly process information encoded in their quantum states. A central goal of the envisaged quantum technologies is to develop devices that can simultaneously perform several of these tasks, namely, reliably store, process, and transmit quantum information. Hybrid quantum systems composed of different physical components with complementary functionalities may provide precisely such multitasking capabilities. This article reviews some of the driving theoretical ideas and first experimental realizations of hybrid quantum systems and the opportunities and challenges they present and offers a glance at the near- and long-term perspectives of this fascinating and rapidly expanding field.

  6. Applications of Multi-Agent Technology to Power Systems

    Science.gov (United States)

    Nagata, Takeshi

    Currently, agents are focus of intense on many sub-fields of computer science and artificial intelligence. Agents are being used in an increasingly wide variety of applications. Many important computing applications such as planning, process control, communication networks and concurrent systems will benefit from using multi-agent system approach. A multi-agent system is a structure given by an environment together with a set of artificial agents capable to act on this environment. Multi-agent models are oriented towards interactions, collaborative phenomena, and autonomy. This article presents the applications of multi-agent technology to the power systems.

  7. Dynamic analysis of interhospital collaboration and competition: empirical evidence from an Italian regional health system.

    Science.gov (United States)

    Mascia, Daniele; Di Vincenzo, Fausto; Cicchetti, Americo

    2012-05-01

    Policymakers stimulate competition in universalistic health-care systems while encouraging the formation of service provision networks among hospital organizations. This article addresses a gap in the extant literature by empirically analyzing simultaneous collaboration and competition between hospitals within the Italian National Health Service, where important procompetition reforms have been implemented. To explore how rising competition between hospitals relates to their propensity to collaborate with other local providers. Longitudinal data on interhospital collaboration and competition collected in an Italian region from 2003 to 2007 are analyzed. Social network analysis techniques are applied to study the structure and dynamics of interhospital collaboration. Negative binomial regressions are employed to explore how interhospital competition relates to the collaborative network over time. Competition among providers does not hinder interhospital collaboration. Collaboration is primarily local, with resource complementarity and differentials in the volume of activity and hospital performance explaining the propensity to collaborate. Formation of collaborative networks among hospitals is not hampered by reforms aimed at fostering market forces. Because procompetition reforms elicit peculiar forms of managed competition in universalistic health systems, studies are needed to clarify whether the positive association between interhospital competition and collaboration can be generalized to other health-care settings. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

  8. Review of the Strategic Plan for International Collaboration on Fusion Science and Technology Research. Fusion Energy Sciences Advisory Committee (FESAC)

    International Nuclear Information System (INIS)

    1998-01-01

    The United States Government has employed international collaborations in magnetic fusion energy research since the program was declassified in 1958. These collaborations have been successful not only in producing high quality scientific results that have contributed to the advancement of fusion science and technology, they have also allowed us to highly leverage our funding. Thus, in the 1980s, when the funding situation made it necessary to reduce the technical breadth of the U.S. domestic program, these highly leveraged collaborations became key strategic elements of the U.S. program, allowing us to maintain some degree of technical breadth. With the recent, nearly complete declassification of inertial confinement fusion, the use of some international collaboration is expected to be introduced in the related inertial fusion energy research activities as well. The United States has been a leader in establishing and fostering collaborations that have involved scientific and technological exchanges, joint planning, and joint work at fusion facilities in the U.S. and worldwide. These collaborative efforts have proven mutually beneficial to the United States and our partners. International collaborations are a tool that allows us to meet fusion program goals in the most effective way possible. Working with highly qualified people from other countries and other cultures provides the collaborators with an opportunity to see problems from new and different perspectives, allows solutions to arise from the diversity of the participants, and promotes both collaboration and friendly competition. In short, it provides an exciting and stimulating environment resulting in a synergistic effect that is good for science and good for the people of the world.

  9. A Study on intensifying efficiency for international collaborative development of Advanced Nuclear Energy Technology

    International Nuclear Information System (INIS)

    Chang, Moon Hee; Kim, H. R.; Kim, H. J.

    2009-08-01

    The objective of the study was to participate the GIF for the efficient propulsion of future nuclear system development. For achieving the objective of this study, the followings were carried out. · Investigation and analysis of the international and domestic trends related to future nuclear system · To maximize the national interests by the strategic participation of GIF meeting - To participate of GIF meeting and to support of relative work - To investigate the System R and D Arrangement and to inform its progress situation · To maximize the propulsion results of Korea/U.S nuclear energy joint research(I-NERI) - To support a delegation by the review of agenda in aspect of the technical/legal point - To participate of BINERIC meeting and to support of relative work · Streamline the nuclear energy R and D due to the effective connection between domestic R and D and international collaboration The result of this study may be used for 1) contribution to establishing the effective foundation and broadening the cooperation activities between the advanced countries and Korea and 2) contribution effective management of Gen IV international collaboration by technical/legal supporting

  10. A Reference Architecture for Electronic Business-to-Business Collaboration Setup and Enactment Systems

    OpenAIRE

    Norta, A.; Grefen, P.; Angelov, S.; Kutvonen, L.

    2010-01-01

    The question what a business-to-business (B2B) collaboration setup and enactment application-system should look like remains open. An important element of such collaboration constitutes the inter-organizational disclosure of business-process details so that the opposing parties may protect their business secrets. For that purpose, eSourcing [37] has been developed as a general businessprocess collaboration concept in the framework of the EU research project Cross- Work. The eSourcing characte...

  11. Internet-centric collaborative design in a distributed environment

    International Nuclear Information System (INIS)

    Kim, Hyun; Kim, Hyoung Sun; Do, Nam Chul; Lee, Jae Yeol; Lee, Joo Haeng; Myong, Jae Hyong

    2001-01-01

    Recently, advanced information technologies including internet-related technology and distributed object technology have opened new possibilities for collaborative designs. In this paper, we discuss computer supports for collaborative design in a distributed environment. The proposed system is the internet-centric system composed of an engineering framework, collaborative virtual workspace and engineering service. It allows the distributed designers to more efficiently and collaboratively work their engineering tasks throughout the design process

  12. TechTracS: NASA's commercial technology management system

    Science.gov (United States)

    Barquinero, Kevin; Cannon, Douglas

    1996-03-01

    The Commercial Technology Mission is a primary NASA mission, comparable in importance to those in aeronautics and space. This paper will discuss TechTracS, NASA Commercial Technology Management System that has been put into place in FY 1995 to implement this mission. This system is designed to identify and capture the NASA technologies which have commercial potential into an off-the-shelf database application, and then track the technologies' progress in realizing the commercial potential through collaborations with industry. The management system consists of four stages. The first is to develop an inventory database of the agency's entire technology portfolio and assess it for relevance to the commercial marketplace. Those technologies that are identified as having commercial potential will then be actively marketed to appropriate industries—this is the second stage. The third stage is when a NASA-industry partnership is entered into for the purposes of commercializing the technology. The final stage is to track the technology's success or failure in the marketplace. The collection of this information in TechTracS enables metrics evaluation and can accelerate the establishment on direct contacts between and NASA technologist and an industry technologist. This connection is the beginning of the technology commercialization process.

  13. Technological learning in bioenergy systems

    International Nuclear Information System (INIS)

    Junginger, Martin; Visser, Erika de; Hjort-Gregersen, Kurt; Koornneef, Joris; Raven, Rob; Faaij, Andre; Turkenburg, Wim

    2006-01-01

    The main goal of this article is to determine whether cost reductions in different bioenergy systems can be quantified using the experience curve approach, and how specific issues (arising from the complexity of biomass energy systems) can be addressed. This is pursued by case studies on biofuelled combined heat and power (CHP) plants in Sweden, global development of fluidized bed boilers and Danish biogas plants. As secondary goal, the aim is to identify learning mechanisms behind technology development and cost reduction for the biomass energy systems investigated. The case studies reveal large difficulties to devise empirical experience curves for investment costs of biomass-fuelled power plants. To some extent, this is due to lack of (detailed) data. The main reason, however, are varying plant costs due to differences in scale, fuel type, plant layout, region etc. For fluidized bed boiler plants built on a global level, progress ratios (PRs) for the price of entire plants lies approximately between 90-93% (which is typical for large plant-like technologies). The costs for the boiler section alone was found to decline much faster. The experience curve approach delivers better results, when the production costs of the final energy carrier are analyzed. Electricity from biofuelled CHP-plants yields PRs of 91-92%, i.e. an 8-9% reduction of electricity production costs with each cumulative doubling of electricity production. The experience curve for biogas production displays a PR of 85% from 1984 to the beginning of 1990, and then levels to approximately 100% until 2002. For technologies developed on a local level (e.g. biogas plants), learning-by-using and learning-by-interacting are important learning mechanism, while for CHP plants utilizing fluidized bed boilers, upscaling is probably one of the main mechanisms behind cost reductions

  14. SOMWeb: a semantic web-based system for supporting collaboration of distributed medical communities of practice.

    Science.gov (United States)

    Falkman, Göran; Gustafsson, Marie; Jontell, Mats; Torgersson, Olof

    2008-08-26

    Information technology (IT) support for remote collaboration of geographically distributed communities of practice (CoP) in health care must deal with a number of sociotechnical aspects of communication within the community. In the mid-1990s, participants of the Swedish Oral Medicine Network (SOMNet) began discussing patient cases in telephone conferences. The cases were distributed prior to the conferences using PowerPoint and email. For the technical support of online CoP, Semantic Web technologies can potentially fulfill needs of knowledge reuse, data exchange, and reasoning based on ontologies. However, more research is needed on the use of Semantic Web technologies in practice. The objectives of this research were to (1) study the communication of distributed health care professionals in oral medicine; (2) apply Semantic Web technologies to describe community data and oral medicine knowledge; (3) develop an online CoP, Swedish Oral Medicine Web (SOMWeb), centered on user-contributed case descriptions and meetings; and (4) evaluate SOMWeb and study how work practices change with IT support. Based on Java, and using the Web Ontology Language and Resource Description Framework for handling community data and oral medicine knowledge, SOMWeb was developed using a user-centered and iterative approach. For studying the work practices and evaluating the system, a mixed-method approach of interviews, observations, and a questionnaire was used. By May 2008, there were 90 registered users of SOMWeb, 93 cases had been added, and 18 meetings had utilized the system. The introduction of SOMWeb has improved the structure of meetings and their discussions, and a tenfold increase in the number of participants has been observed. Users submit cases to seek advice on diagnosis or treatment, to show an unusual case, or to create discussion. Identified barriers to submitting cases are lack of time, concern about whether the case is interesting enough, and showing gaps in one's own

  15. Supporting BPMN choreography with system integration artefacts for enterprise process collaboration

    NARCIS (Netherlands)

    Nie, H.; Lu, X.; Duan, H.

    2014-01-01

    Business Process Model and Notation (BPMN) choreography modelling depicts externally visible message exchanges between collaborating processes of enterprise information systems. Implementation of choreography relies on designing system integration solutions to realise message exchanges between

  16. Collaborative Systems Thinking: A Response to the Problems Faced by Systems Engineering's 'Middle Tier'

    Science.gov (United States)

    Phfarr, Barbara B.; So, Maria M.; Lamb, Caroline Twomey; Rhodes, Donna H.

    2009-01-01

    Experienced systems engineers are adept at more than implementing systems engineering processes: they utilize systems thinking to solve complex engineering problems. Within the space industry demographics and economic pressures are reducing the number of experienced systems engineers that will be available in the future. Collaborative systems thinking within systems engineering teams is proposed as a way to integrate systems engineers of various experience levels to handle complex systems engineering challenges. This paper uses the GOES-R Program Systems Engineering team to illustrate the enablers and barriers to team level systems thinking and to identify ways in which performance could be improved. Ways NASA could expand its engineering training to promote team-level systems thinking are proposed.

  17. The Development of a Mobile Application in a Collaborative Banking System

    Directory of Open Access Journals (Sweden)

    Cristian CIUREA

    2010-01-01

    Full Text Available This paper presents a taxonomy of mobile applications with accent on collaborative mobile applications. The development of mobile applications is described in comparison with the other types of informatics applications. Collaborative banking systems are presented in order to create the context in which the Collaborative Multicash Servicedesk (CMS application will be integrated. The mobile applications are analyzed as auto-adaptive applications in order to reveal their advantages. Some metrics are built for evaluating the security and quality of Collaborative Multicash Servicedesk application.

  18. Collaboration for Technological Innovation: Choices and Decisions that Make Partnerships Excel

    Directory of Open Access Journals (Sweden)

    Sonia Regina Mangiavacchi Tuccori

    2014-07-01

    Full Text Available The purpose of this paper is to understand the relationship between strategies and collaborative organizational arrangements and the defining of their position within the corporate power structure. The strategic approach employed herein is that of case studies so as to comprehend the peculiarities and the value proposition of the management model of innovation networks at a Brazilian company that operates in the personal hygiene, perfumery and cosmetics segment. To excel within an environment marked by increased global competition, companies have to develop and learn with an innovative work structure and culture. This derives from the rapid shortening of product life cycles which drives the need to innovate at more frequent intervals and to develop technologies, processes, products and/or services more efficiently. Furthermore, given increased product, technologies and processes complexity, attention is drawn to the expansion of costs and risks to innovate to the extent of enhancing uncertainties and pressure on R&D+i (Research, Development and Innovation budgets. Meanwhile, the need for interdisciplinarity by means of cooperation likewise comes to light.

  19. A MOBILE-DEVICE-SUPPORTED PEER-ASSISTED LEARNING SYSTEM FOR COLLABORATIVE EARLY EFL READING

    Directory of Open Access Journals (Sweden)

    Yu-Ju Lan

    2007-02-01

    Full Text Available Collaborative learning methods which emphasize peer interaction have been widely applied to increase the intensity and effectiveness of EFL reading programs. However, simply grouping students heterogeneously and assigning them group goals does not guarantee that effective collaborative learning will ensue. The present research includes two studies. In Study One, the weaknesses of collaborative learning in a traditional EFL setting were observed. Then, in Study Two, a mobile-device-supported peer-assisted learning (MPAL system was developed for the purpose of addressing the identified weaknesses. Two classes of twenty-six third grade students participated in the present research to examine the unique contribution of MPAL to collaborative EFL reading activities. The collaborative behavior of elementary EFL learners was videotaped and analyzed. Detailed analysis of the videotaped behavior indicated that MPAL helped improve collaboration in elementary school level EFL learners and promotes their reading motivation.

  20. Simulation Research on an Electric Vehicle Chassis System Based on a Collaborative Control System

    Directory of Open Access Journals (Sweden)

    Nenglian Feng

    2013-01-01

    Full Text Available This paper presents a collaborative control system for an electric vehicle chassis based on a centralized and hierarchical control architecture. The centralized controller was designed for the suspension and steering system, which is used for improving ride comfort and handling stability; the hierarchical controller was designed for the braking system, which is used for distributing the proportion of hydraulic braking and regenerative braking to improve braking performance. These two sub-controllers function at the same level of the vehicle chassis control system. In order to reduce the potential conflict between the two sub-controllers and realize a coordination optimization of electric vehicle performance, a collaborative controller was built, which serves as the upper controller to carry out an overall coordination analysis according to vehicle signals and revises the decisions of sub-controllers. A simulation experiment was carried out with the MATLAB/Simulink software. The simulation results show that the proposed collaborative control system can achieve an optimized vehicle handling stability and braking safety.

  1. Building a Collaborative Governance System: A Comparative Case Analysis

    Science.gov (United States)

    2015-06-01

    additional resources. Bandwagon effects occur. As the process emerges and appears to be achieving success, more resources are attracted. Consensus...97 C. WHAT ARE THE ENABLERS AND BARRIERS TO EFFECTIVE COLLABORATION IN THIS CASE...seems as though the challenges are getting bigger as well as more frequent, across many disciplines.”1 Effective incident response requires command

  2. Trends in control and decision-making for human-robot collaboration systems

    CERN Document Server

    Zhang, Fumin

    2017-01-01

    This book provides an overview of recent research developments in the automation and control of robotic systems that collaborate with humans. A measure of human collaboration being necessary for the optimal operation of any robotic system, the contributors exploit a broad selection of such systems to demonstrate the importance of the subject, particularly where the environment is prone to uncertainty or complexity. They show how such human strengths as high-level decision-making, flexibility, and dexterity can be combined with robotic precision, and ability to perform task repetitively or in a dangerous environment. The book focuses on quantitative methods and control design for guaranteed robot performance and balanced human experience. Its contributions develop and expand upon material presented at various international conferences. They are organized into three parts covering: one-human–one-robot collaboration; one-human–multiple-robot collaboration; and human–swarm collaboration. Individual topic ar...

  3. Collaborative Educational Leadership: The Emergence of Human Interactional Sense-Making Process as a Complex System

    Science.gov (United States)

    Jäppinen, Aini-Kristiina

    2014-01-01

    The article aims at explicating the emergence of human interactional sense-making process within educational leadership as a complex system. The kind of leadership is understood as a holistic entity called collaborative leadership. There, sense-making emerges across interdependent domains, called attributes of collaborative leadership. The…

  4. Towards the Reconciliation of Knowledge Management and e-Collaboration Systems

    Science.gov (United States)

    Le Dinh, Thang; Rinfret, Louis; Raymond, Louis; Dong Thi, Bich-Thuy

    2013-01-01

    Purpose: The purpose of this paper is to propose an intelligent infrastructure for the reconciliation of knowledge management and e-collaboration systems. Design/Methodology/Approach:Literature on e-collaboration, information management, knowledge management, learning process, and intellectual capital is mobilised in order to build the conceptual…

  5. Collaborative Water Resource Management: What makes up a supportive governance system?

    NARCIS (Netherlands)

    Boer, C.L.; Vinke-de Kruijf, Joanne; Özerol, Gül; Bressers, Johannes T.A.

    2016-01-01

    Collaboration is increasingly seen as an important aspect of successful water management, and yet it remains insufficiently understood. This paper examines how collaboration is influenced by the governance system that guides and organizes the related actions and interactions. Building upon an

  6. Collaboration and E-collaboration

    DEFF Research Database (Denmark)

    Razmerita, Liana; Kirchner, Kathrin

    2015-01-01

    Understanding student’s perception of collaboration and how collaboration is supported by ICT is important for its efficient use in the classroom. This article aims to investigate how students perceive collaboration and how they use new technologies in collaborative group work. Furthermore......, it tries to measure the impact of technology on students’ satisfaction with collaboration outcomes. In particular, the study aims to address the following research questions: Which demographic information (e.g. gender and place of origin) is significant for collaboration and ecollaboration? and Which...... are the perceived factors that influence the students’ group performance? The findings of this study emphasize that there are gender and cultural differences with respect to the perception of e-collaboration. Furthermore, the article summarizes in a model the most significant factors influencing group performance....

  7. A Collaborative Semantic Annotation System in Health: Towards a SOA Design for Knowledge Sharing in Ambient Intelligence

    Directory of Open Access Journals (Sweden)

    Gabriel Guerrero-Contreras

    2017-01-01

    Full Text Available People nowadays spend more and more time performing collaborative tasks at anywhere and anytime. Specifically, professionals want to collaborate with each other by using advanced technologies for sharing knowledge in order to improve/automatize business processes. Semantic web technologies offer multiple benefits such as data integration across sources and automation enablers. The conversion of the widespread Content Management Systems into its semantic equivalent is a relevant step, as this enables the benefits of the semantic web to be extended. The FLERSA annotation tool makes it possible. In particular, it converts the Joomla! CMS into its semantic equivalent. However, this tool is highly coupled with that specific Joomla! platform. Furthermore, ambient intelligent (AmI environments can be seen as a natural way to address complex interactions between users and their environment, which could be transparently supported through distributed information systems. However, to build distributed information systems for AmI environments it is necessary to make important design decisions and apply techniques at system/software architecture level. In this paper, a SOA-based design solution consisting of two services and an underlying middleware is combined with the FLERSA tool. It allows end-users to collaborate independently of technical details and specific context conditions and in a distributed, decentralized way.

  8. Collaborative Technologies for Distributed Science - Fusion Energy and High-Energy Physics

    International Nuclear Information System (INIS)

    Schissel, D.P.; Abla, G.; Burruss, J.R.; Gottschalk, E.

    2006-01-01

    variety of remote participation methods, on improving interoperability between the different approaches, on ease of use, and on improved security. This paper will compare the requirements of FES and HEP, discuss today's solutions, examine areas where more functionality is required, and discuss those areas with sufficient overlap in requirements that joint research into collaborative technologies will increase the benefit to both. (author)

  9. Scalable collaborative risk management technology for complex critical systems

    Science.gov (United States)

    Campbell, Scott; Torgerson, Leigh; Burleigh, Scott; Feather, Martin S.; Kiper, James D.

    2004-01-01

    We describe here our project and plans to develop methods, software tools, and infrastructure tools to address challenges relating to geographically distributed software development. Specifically, this work is creating an infrastructure that supports applications working over distributed geographical and organizational domains and is using this infrastructure to develop a tool that supports project development using risk management and analysis techniques where the participants are not collocated.

  10. A collaboration on development of requirements and guidelines for proliferation resistance of future nuclear system in the IAEA INPRO

    International Nuclear Information System (INIS)

    Oh, Keun Bae; Lee, Kwang Seok; Kim, Hyun Jun; Jeong, Ik; Yang, Myung Seung; Ko, Won Il

    2003-10-01

    This study surveyed and analyzed the existing activities and international status concerning proliferation resistance of nuclear energy systems, reviewed the features of proliferation resistance, and derived the requirements of future innovative nuclear energy systems. In IAEA INPRO, guidance for the evaluation of innovative nuclear reactors and fuel cycles on proliferation resistance was finalized through collaboration of member countries including Korea in reviewing technological status and developing the methodology for evaluation of proliferation resistance. This report, first, describes the progress of INPRO and the participation status of Korea in the project, and briefly summarizes the report of phase IA of INPRO. Next, features of proliferation resistance of nuclear systems, collaboration in the GIF and the INPRO for development of requirements and guidelines for proliferation resistance, and the final result of guidance for the evaluation of proliferation resistance were described. Finally, this study proposed measures for participation of further progress of the INPRO

  11. How space design and technology can support the Pharmacy Practice Model Initiative through interprofessional collaboration

    Directory of Open Access Journals (Sweden)

    Lindsay Hahn

    2014-01-01

    Full Text Available Purpose: The Pharmacy Practice Model Initiative (PPMI calls pharmacists to more direct patient care and increased responsibility for medication-related outcomes, as a means of achieving greater safety, improving outcomes and reducing costs. This article acknowledges the value of interprofessional collaboration to the PPMI and identifies the implications of the Initiative for space design and technology, both of which stand to help the Initiative gather additional support. Summary: The profession of pharmacy has for some time now become increasingly vocal about its desire to take on greater responsibility for patient outcomes. With drug costs representing the largest portion of a hospital's pharmacy budget and reimbursements becoming more contingent on readmission avoidance, the pharmacy's influence on a hospital's bottom line is significant. More importantly, study after study is showing that with greater pharmacist intervention, patient outcomes improve. This article addresses the ways in which developments in the fields of technology and facility design can assist in the deployment of the PPMI. Conclusion: As the PPMI achieves a critical level of support from inside and outside the pharmacy, and more empirical research emerges regarding the improved outcomes and cost savings of increasing the roles of both clinical pharmacists and pharmacy technicians, the industry sectors of healthcare technology and healthcare design stand ready to assist in the execution of this new model. By encouraging pharmacists, doctors and nurses to work together - and all caregivers to work with facility designers, biomedical engineers and IT specialists, there is the increased likelihood of these fields turning to each other to problem-solve together, all for the ultimate benefit to patients and their families.   Type: Commentary

  12. Enabling all young Australians to grow up safe, happy, healthy and resilient: a Collaboration for Young People, Technology and Wellbeing.

    Science.gov (United States)

    2011-07-01

    This paper describes a framework for a multi-disciplinary collaboration to investigate the role of technology for improving young Australians' mental health and wellbeing. The poor mental health of young Australians poses a significant challenge to Australia's future. Half of all Australians will experience a mental health difficulty in their lifetime and 75% of mental illness has its onset before age 25. Cross-sectoral collaboration is critical for meeting this challenge. In order to establish a world-first multi-partner collaboration, leading researchers and institutes, commercial, non-profit and end-user organization and young people were identified and invited to participate. Together we have developed an international research framework that explores the role of technologies in young people's lives, their potential and how this can be harnessed to address challenges facing young people. This research framework will: (i) conduct empirical research that tests the utility of technology across mental health promotion, prevention, early intervention and treatment and, (ii) translate existing and new knowledge into products and services that help create a generation of safe, happy, healthy and resilient young people. Research undertaken by the Collaboration will be the most comprehensive investigation of technologies' potential to improve the wellbeing of young people ever conducted, leading to significant benefits for Australian young people and their mental health.

  13. Supporting teachers’ collaboration in design teams to develop Technological Pedagogical Content Knowledge: the case of science teachers in Tanzania

    NARCIS (Netherlands)

    Kafyulilo, Ayoub; Fisser, Petra; Voogt, Joke; McBride, R.; Searson, M.

    2013-01-01

    This study assessed the effect of support on the teachers’ collaboration in design teams and development of Technological Pedagogical Content Knowledge (TPACK). The study was carried out in two secondary schools in Tanzania: Chang’ombe and Jitegemee secondary schools. From each school 10 teachers

  14. STUDENT OPINION TOWARDS USING AN OPEN SOURCE LEARNING MANAGEMENT SYSTEM TOGETHER WITH A COLLABORATIVE TOOL

    Directory of Open Access Journals (Sweden)

    Nadire Cavus

    2008-12-01

    Full Text Available This paper is about a pilot study which has been carried out at the Near East University during the 2004/5 FallSemester using the Moodle LMS together with GREWPtool collaborative editor. The system has been tested with 36students taking the Java and the Pascal programming courses. The results of the pilot study showed that a LearningManagement System can be made more efficient if it is enhanced by a collaborative learning tool. Our results have alsoshown that programming languages such as Pascal and Java can be thought successfully in a web-based environment usingan LMS system together with a collaborative tool

  15. Developing ''SMART'' Equipment and Systems through Collaborative NERI Research and Development: A First Year of Progress

    International Nuclear Information System (INIS)

    Harmon, Daryl L.; Golay, Michael W.; Chapman, Leon D.; Maynard, Kennet P.

    2000-01-01

    The US Department of Energy (DOE) created the Nuclear Energy Research Initiative (NERI) in 1999 to conduct research and development with the objectives of: (1) overcoming the principal technical obstacles to expanded nuclear energy use, (2) advancing the state of nuclear technology to maintain its competitive position in domestic and world markets, and (3) improving the performance, efficiency, reliability, and economics of nuclear energy. The NERI program is now beginning its second year with increased funding and an emphasis on international participation. Among the programs selected for funding was the ''Smart Equipment and Systems to Improve Reliability and Safety in Future Nuclear Power Plant Operations''. This program is a 36 month collaborative effort bringing together the technical capabilities of Westinghouse Nuclear Automation, Sandia National Laboratories, Duke Engineering and Services (DE and S), Massachusetts Institute of Technology (MIT) and Pennsylvania State University (PSU). The goal of the program is to design, develop, and evaluate an integrated set of tools and methodologies that can improve the reliability and safety of advanced nuclear power plants through the introduction of smart equipment and predictive maintenance technology. The results have implications for reduced construction costs. This paper discusses: (1) the goals and significance of the program, (2) the significant achievements of the program's first year and the current direction for its continuing efforts and (3) potential cooperation with the domestic nuclear and component manufacturing industries, and with international organizations

  16. Collaborative Economy

    DEFF Research Database (Denmark)

    collaborative economy and tourism Dianne Dredge and Szilvia Gyimóthy PART I - Theoretical explorations 2.Definitions and mapping the landscape in the collaborative economy Szilvia Gyimóthy and Dianne Dredge 3.Business models of the collaborative economy Szilvia Gyimóthy 4.Responsibility and care...... in the collaborative economy Dianne Dredge 5.Networked cultures in the collaborative economy Szilvia Gyimóthy 6.Policy and regulatory perspectives in the collaborative economy Dianne Dredge PART II - Disruptions, innovations and transformations 7.Regulating innovation in the collaborative economy: An examination...... localities of tourism Greg Richards 11.Collaborative economy and destination marketing organizations: A systems approach Jonathan Day 12.Working within the Collaborative Tourist Economy: The complex crafting of work and meaning Jane Widtfeldt Meged and Mathilde Dissing Christensen PART - III Encounters...

  17. Comparative study on collaborative interaction in non-immersive and immersive systems

    Science.gov (United States)

    Shahab, Qonita M.; Kwon, Yong-Moo; Ko, Heedong; Mayangsari, Maria N.; Yamasaki, Shoko; Nishino, Hiroaki

    2007-09-01

    This research studies the Virtual Reality simulation for collaborative interaction so that different people from different places can interact with one object concurrently. Our focus is the real-time handling of inputs from multiple users, where object's behavior is determined by the combination of the multiple inputs. Issues addressed in this research are: 1) The effects of using haptics on a collaborative interaction, 2) The possibilities of collaboration between users from different environments. We conducted user tests on our system in several cases: 1) Comparison between non-haptics and haptics collaborative interaction over LAN, 2) Comparison between non-haptics and haptics collaborative interaction over Internet, and 3) Analysis of collaborative interaction between non-immersive and immersive display environments. The case studies are the interaction of users in two cases: collaborative authoring of a 3D model by two users, and collaborative haptic interaction by multiple users. In Virtual Dollhouse, users can observe physics law while constructing a dollhouse using existing building blocks, under gravity effects. In Virtual Stretcher, multiple users can collaborate on moving a stretcher together while feeling each other's haptic motions.

  18. Collaborative autonomous systems in models of urban logistics

    OpenAIRE

    Arango Serna, Martín Darío; Serna Uran, Conrado Augusto; Alvarez Uribe, Karla Cristina; Arango Serna, Martín Darío

    2012-01-01

    Cities growth and along with them the exchange and distribution of goods and services has led in recent years to a greater increasing interest for the optimization of logistic processes carried out in urban areas. In this article, the main approaches and solutions which have been proposed from academic research will be described, focusing mainly on collaborative autonomic logistics, which is offered as an attractive solution to the urban goods distribution problems in complex cities.

  19. TULUNGAN: A Consensus-Independent Reputation System for Collaborative Web Filtering Systems

    Directory of Open Access Journals (Sweden)

    Alexis V. Pantola

    2011-12-01

    Full Text Available Web filtering systems allow or prohibit access to websites based on categories (e.g., pornography,violence, sports, etc.. Categorization of websites can be done automatically or manually. Automaticcategorization is prone to under- and over-blocking. On the other hand, manual approach is typicallyperformed by a limited number of people making it not scalable.Collaborative web filtering systems, a variation of manual categorization, allow anyone to categorizewebsites in order to determine which domain these sites belong (e.g., pornography, violence, sports,etc.. This attempts to solve the scalability issue of the typical manual method.The approach offered by collaborative web filtering relies heavily on the contribution of users in orderto make the system scalable and less prone to errors. However, its success is greatly dependent on usercooperation. To promote cooperation, reputation system can be used in web filtering.A previous study called Rater-Rating promotes cooperation and explores the use of a user-drivenreputation system that measures both the contributor and rater reputation of users of a collaborative websystem. However, Rater-Rating is consensus dependent. If the number of malicious users are more thantheir good counterparts, the reputation system can be defeated. In other words, the system canmistakenly give malicious users a high reputation value.This study discusses a reputation system called Tulungan that is consensus-independent. It can detectthe presence of malicious users even if the number of their good counterparts are fewer. A simulationresult that compares the effectiveness of Tulungan relative to Rater-Rating is presented in this paper.The simulation shows that Tulungan is still effective even with 25% good users while Rater-Ratingrequires at least 50% good users to be effective.

  20. Collaborative engagement experiment

    Science.gov (United States)

    Mullens, Katherine; Troyer, Bradley; Wade, Robert; Skibba, Brian; Dunn, Michael

    2006-05-01

    Unmanned ground and air systems operating in collaboration have the potential to provide future Joint Forces a significant capability for operations in complex terrain. Collaborative Engagement Experiment (CEE) is a consolidation of separate Air Force, Army and Navy collaborative efforts within the Joint Robotics Program (JRP) to provide a picture of the future of unmanned warfare. The Air Force Research Laboratory (AFRL), Material and Manufacturing Directorate, Aerospace Expeditionary Force Division, Force Protection Branch (AFRL/MLQF), The Army Aviation and Missile Research, Development and Engineering Center (AMRDEC) Joint Technology Center (JTC)/Systems Integration Laboratory (SIL), and the Space and Naval Warfare Systems Center - San Diego (SSC San Diego) are conducting technical research and proof of principle experiments for an envisioned operational concept for extended range, three dimensional, collaborative operations between unmanned systems, with enhanced situational awareness for lethal operations in complex terrain. This paper describes the work by these organizations to date and outlines some of the plans for future work.

  1. Harnessing the power of mobile technologies for collaborating, crowdsourcing, and creating

    Science.gov (United States)

    Crompton, H.

    2015-12-01

    Today's digital technologies can have a powerful influence on teaching and learning. M-learning and u-learning in particular are changing pedagogical practice. Sub categories are rapidly emerging, such as context-aware ubiquitous learning, that involve students learning subject content while immersed in authentic and relevant surroundings. Learning cultures are a nebulous blend of traditions, values, beliefs, and rituals built up over time. For a long time, education has long been conceived as classroom-based and predominantly sedentary (Merchant, 2012). Recent mobile technologies are disrupting this culture in favor of learning that is contextualized, personalized, on demand, and ubiquitous (Crompton, 2013). 21st century students are a different breed than past generations (Prensky, 2001). These students have grown up in a time that has not only altered their perceptions and practices but modified the wiring of the brain through neuroplasticity (Crompton, 2012). Students now cognitively receive information quickly through non-linear methods (Gross, 2003, Oblinger & Oblinger, 2005). They think differently. They also seem to be attached to mobile devices 24/7, although the content of the lesson does not match what they seem to be doing on the mobile devices. This presentation will showcase how to get your students to harness the power of mobile devices for educational purposes. For example, students in your classes will be using devices to collaborate on activities with Google Forms, crowdsourcing the best class questions in Slido, and screencasting thoughts and ideas to share with others with Educreations. These are examples of free apps or Web 2.0 tools that can be used on all the major mobile platforms. Crompton, H. (2013). Mobile learning: New approach, new theory. In Z. L. Berge & L. Y. Muilenburg (Eds.), Handbook of mobile learning (pp. 47-57). Prensky, M. (2001). Digital natives, digital immigrants. Mcb University Press, 9(5). Oblinger, D., & Oblinger, J

  2. Structural Conditions for Collaboration and Learning in Innovation Networks: Using an Innovation System Performance Lens to Analyse Agricultural Knowledge Systems

    NARCIS (Netherlands)

    Hermans, F.; Klerkx, L.W.A.; Roep, D.

    2015-01-01

    Purpose: We investigate how the structural conditions of eight different European agricultural innovation systems can facilitate or hinder collaboration and social learning in multidisciplinary innovation networks. Methodology: We have adapted the Innovation System Failure Matrix to investigate the

  3. Convenience Matters: A Qualitative Study on the Impact of Use of Social Media and Collaboration Technologies on Learning Experience and Performance in Higher Education

    Science.gov (United States)

    Jang, Yeona

    2015-01-01

    Social media and collaboration technologies are viewed as valuable tools for creating a new reality of collaborative learning, particularly in higher education facing millennials growing up with various technologies in their daily lives. Using the example of an undergraduate course taught on-campus, this study examines how millennial students in…

  4. Collaborative ethnography for information systems research Studying knowledge work practices and designing supportive information systems

    Directory of Open Access Journals (Sweden)

    Ronald Maier

    2012-04-01

    Full Text Available Understanding knowledge work and supporting it with information systems (ISs are challenging tasks. Knowledge work has changed substantially recently and studies on how knowledge work is currently performed are scarce. Ethnography is the most suitable qualitative research method for studying knowledge work, yet too time-consuming, costly and unfocused for the fast changing IS domain. Moreover, results from qualitative studies need to be transformed into artefacts useful for IS requirements engineering and design. This paper proposes a procedure for collaborative ethnography to study knowledge work practices and inform IS requirements gathering and design illustrated with the case of a collaborative ethnographic study of seven organisations in four European countries performed in a large-scale international IS research and development project. The paper also critically discusses the procedure’s applicability and limitations.

  5. NASA's Launch Propulsion Systems Technology Roadmap

    Science.gov (United States)

    McConnaughey, Paul K.; Femminineo, Mark G.; Koelfgen, Syri J.; Lepsch, Roger A; Ryan, Richard M.; Taylor, Steven A.

    2012-01-01

    Safe, reliable, and affordable access to low-Earth (LEO) orbit is necessary for all of the United States (US) space endeavors. In 2010, NASA s Office of the Chief Technologist commissioned 14 teams to develop technology roadmaps that could be used to guide the Agency s and US technology investment decisions for the next few decades. The Launch Propulsion Systems Technology Area (LPSTA) team was tasked to address the propulsion technology challenges for access to LEO. The developed LPSTA roadmap addresses technologies that enhance existing solid or liquid propulsion technologies and their related ancillary systems or significantly advance the technology readiness level (TRL) of less mature systems like airbreathing, unconventional, and other launch technologies. In developing this roadmap, the LPSTA team consulted previous NASA, military, and industry studies as well as subject matter experts to develop their assessment of this field, which has fundamental technological and strategic impacts for US space capabilities.

  6. Empirical Knowledge Transfer and Collaboration with Self-Regenerative Systems

    Science.gov (United States)

    2007-06-01

    shipping, ecommerce , energy, rail and mass transit, pipelines, the chemical industry and water and sewer services. Cornell technologies can help...significant advantages over current technologies in supporting the needs of current and future military programs. The success of Cornell’s effort on

  7. Collaboration Technology in Military Operations: Lessons Learned from the Corporate Domain

    National Research Council Canada - National Science Library

    Scott, Stacey D; Cummings, Mary L; Graeber, David A; Nelson, W. T; Bolia, Robert S

    2006-01-01

    .... However, research in corporate environments has shown that explicit communication, while an important aspect of collaboration, is often used together with more subtle interactions to help teams...

  8. Virtual maintenance technology for reactor system based on PPR technology

    International Nuclear Information System (INIS)

    Wu Yaxiang; Ma Baiyong

    2009-01-01

    Based on the Product, Process and Resources (PPR) technology, the establishing technology of virtual maintenance environment for the reactor system and the process structure tree for virtual maintenance is studied, and the flow for the maintainability design and simulation for reactor system is put forward. Based on the subsection simulation of maintenance process and layered design of maintenance actions, the leveled structure of the reactor system virtual maintenance task is studied. The relation for the data of product, process and resource is described by Plan Evaluation and Review Technology (PERT) diagram to define the maintenance operation. (authors)

  9. Towards a Context-Aware Framework for Improving Collaboration of Users in Groupware Systems

    Directory of Open Access Journals (Sweden)

    Luis G. Montané-Jiménez

    2014-09-01

    Full Text Available A Context-Aware Groupware System (CAGS enables the members of a team to communicate, cooperate and coordinate their activities to achieve a common goal, by providing them tools that are aware of their current execution context and adapt accordingly. CAGS can be found in several domains such as entertainment, particularly Collaborative First-Person-Shooter (FPS video games. In CAGS, the means of collaboration traditionally provided to users (e.g. text and audio messaging are not necessarily adequate: for instance, in a FPS, messages can distract the gamer due to the speed of the game. This paper reports a study that, for Collaborative FPS, identifies advantages/disadvantages of current means of collaboration and social behaviors that arise when players interact face-to-face or remotely. Based on this study, a context-aware conceptual model and architecture is proposed for CAGS aimed to improve user collaboration.

  10. Nuclear Systems (NS): Technology Demonstration Unit (TDU)

    Data.gov (United States)

    National Aeronautics and Space Administration — The Nuclear Systems Project demonstrates nuclear power technology readiness to support the goals of NASA's Space Technology Mission Directorate. To this end, the...

  11. A Systems Approach to Technology Education.

    Science.gov (United States)

    Hacker, Michael; Barden, Robert

    1983-01-01

    Provides a brief history of industrial arts curriculum development, a rationale for a technology-based study of industrial arts, and the use of a systems view in understanding and interpreting technology. (SK)

  12. Development of the Integrated Information Technology System

    National Research Council Canada - National Science Library

    2005-01-01

    The Integrated Medical Information Technology System (IMITS) Program is focused on implementation of advanced technology solutions that eliminate inefficiencies, increase utilization and improve quality of care for active duty forces...

  13. Making Technology Ready: Integrated Systems Health Management

    Science.gov (United States)

    Malin, Jane T.; Oliver, Patrick J.

    2007-01-01

    This paper identifies work needed by developers to make integrated system health management (ISHM) technology ready and by programs to make mission infrastructure ready for this technology. This paper examines perceptions of ISHM technologies and experience in legacy programs. Study methods included literature review and interviews with representatives of stakeholder groups. Recommendations address 1) development of ISHM technology, 2) development of ISHM engineering processes and methods, and 3) program organization and infrastructure for ISHM technology evolution, infusion and migration.

  14. NASA's Advanced Information Systems Technology (AIST) Program: Advanced Concepts and Disruptive Technologies

    Science.gov (United States)

    Little, M. M.; Moe, K.; Komar, G.

    2014-12-01

    NASA's Earth Science Technology Office (ESTO) manages a wide range of information technology projects under the Advanced Information Systems Technology (AIST) Program. The AIST Program aims to support all phases of NASA's Earth Science program with the goal of enabling new observations and information products, increasing the accessibility and use of Earth observations, and reducing the risk and cost of satellite and ground based information systems. Recent initiatives feature computational technologies to improve information extracted from data streams or model outputs and researchers' tools for Big Data analytics. Data-centric technologies enable research communities to facilitate collaboration and increase the speed with which results are produced and published. In the future NASA anticipates more small satellites (e.g., CubeSats), mobile drones and ground-based in-situ sensors will advance the state-of-the-art regarding how scientific observations are performed, given the flexibility, cost and deployment advantages of new operations technologies. This paper reviews the success of the program and the lessons learned. Infusion of these technologies is challenging and the paper discusses the obstacles and strategies to adoption by the earth science research and application efforts. It also describes alternative perspectives for the future program direction and for realizing the value in the steps to transform observations from sensors to data, to information, and to knowledge, namely: sensor measurement concepts development; data acquisition and management; data product generation; and data exploitation for science and applications.

  15. QUALITY OF INTER-ORGANIZATIONAL SYSTEM (IOS FRAMEWORK FOR SUPPLY CHAIN MANAGEMENT (SCM: STUDY OF SIX COLLABORATIVE FACTORS FROM SUPPLIER AND CUSTOMER PERSPECTIVES

    Directory of Open Access Journals (Sweden)

    Miloš Mihajlović

    2010-09-01

    Full Text Available This paper has identified a research gap to study how organizations collaborate together to adopt Inter- Organizational System (IOS for Supply Chain Management (SCM. We propose such a framework and then use four theories, namely resource dependency theory, organizational theory, actor-network theory and negotiated order theory, to understand how the framework supports management collaboration and interaction in the adoption of an IOS. This adoption framework is proposed to better study how senior management staff, from both supplier and customer perspectives, collaborate and interact in the IOS adoption process. The framework has been constructed from the literature identifying six major aspects for consideration namely: inter and intra organizational collaboration; strategic management approaches; supply chain design (SCD; business process redesign/reengineering (BPR; information systems (IS / information technology (IT architecture and external environmental factors. From customer and supplier perspectives the adoption of IOS for SCM, makes a significant contribution to knowledge in this field.

  16. Data model for the collaboration between land administration systems and agricultural land parcel identification systems.

    Science.gov (United States)

    Inan, Halil Ibrahim; Sagris, Valentina; Devos, Wim; Milenov, Pavel; van Oosterom, Peter; Zevenbergen, Jaap

    2010-12-01

    The Common Agricultural Policy (CAP) of the European Union (EU) has dramatically changed after 1992, and from then on the CAP focused on the management of direct income subsidies instead of production-based subsidies. For this focus, Member States (MS) are expected to establish Integrated Administration and Control System (IACS), including a Land Parcel Identification System (LPIS) as the spatial part of IACS. Different MS have chosen different solutions for their LPIS. Currently, some MS based their IACS/LPIS on data from their Land Administration Systems (LAS), and many others use purpose built special systems for their IACS/LPIS. The issue with these different IACS/LPIS is that they do not have standardized structures; rather, each represents a unique design in each MS, both in the case of LAS based or special systems. In this study, we aim at designing a core data model for those IACS/LPIS based on LAS. For this purpose, we make use of the ongoing standardization initiatives for LAS (Land Administration Domain Model: LADM) and IACS/LPIS (LPIS Core Model: LCM). The data model we propose in this study implies the collaboration between LADM and LCM and includes some extensions. Some basic issues with the collaboration model are discussed within this study: registration of farmers, land use rights and farming limitations, geometry/topology, temporal data management etc. For further explanation of the model structure, sample instance level diagrams illustrating some typical situations are also included. Copyright © 2010 Elsevier Ltd. All rights reserved.

  17. Offsite emergency radiological monitoring system and technology

    International Nuclear Information System (INIS)

    Mao Yongze

    1994-01-01

    The study and advance of the offsite radiological monitoring system and technology which is an important branch in the field of nuclear monitoring technology are described. The author suggests that the predicting and measuring system should be involved in the monitoring system. The measuring system can further be divided into four sub-systems, namely plume exposure pathway, emergency worker, ingestion exposure pathway and post accident recovery measuring sub-systems. The main facilities for the monitoring system are concluded as one station, one helicopter, one laboratory and two vehicles. The instrumentation for complement of the facilities and their good performance characteristics, up-to-date technology are also introduced in brief. The offsite emergency radiation monitoring system and technology are compared in detail with those recommended by FEMA U.S.A.. Finally the paper discusses some trends in development of emergency radiation monitoring system and technology in the developed countries

  18. TANK FARM REMEDIATION TECHNOLOGY DEVELOPMENT PROJECT AN EXERCISE IN TECHNICAL & REGULATORY COLLABORATION

    Energy Technology Data Exchange (ETDEWEB)

    JARAYSI, M.N.

    2007-01-08

    The Tank Farm Remediation Technology Development Project at the Hanford Site focuses on waste storage tanks, pipelines and associated ancillary equipment that are part of the C-200 single-shell tank (SST) farm system located in the C Tank Farm. The purpose of the project is to obtain information on the implementation of a variety of closure activities and to answer questions on technical, operational and regulatory issues associated with closure.

  19. TANK FARM REMEDIATION TECHNOLOGY DEVELOPMENT PROJECT AN EXERCISE IN TECHNICAL and REGULATORY COLLABORATION

    International Nuclear Information System (INIS)

    JARAYSI, M.N.

    2007-01-01

    The Tank Farm Remediation Technology Development Project at the Hanford Site focuses on waste storage tanks, pipelines and associated ancillary equipment that are part of the C-200 single-shell tank (SST) farm system located in the C Tank Farm. The purpose of the project is to obtain information on the implementation of a variety of closure activities and to answer questions on technical, operational and regulatory issues associated with closure

  20. Information technology security system engineering methodology

    Science.gov (United States)

    Childs, D.

    2003-01-01

    A methodology is described for system engineering security into large information technology systems under development. The methodology is an integration of a risk management process and a generic system development life cycle process. The methodology is to be used by Security System Engineers to effectively engineer and integrate information technology security into a target system as it progresses through the development life cycle. The methodology can also be used to re-engineer security into a legacy system.

  1. Collaborations and Partnerships in NASA’s Earth Science Data Systems

    Directory of Open Access Journals (Sweden)

    Hampapuram K. Ramapriyan

    2017-11-01

    Full Text Available NASA has been collecting Earth observation data from spaceborne instruments since 1960. Today, there are tens of satellites orbiting the Earth and collecting frequent global observations for the benefit of mankind. Collaboration between NASA and organizations in the US and other countries has been extremely important in maintaining the Earth observation capabilities as well as collecting, organizing and managing the data. These collaborations have occurred in the form of: 1. NASA’s developing and launching spacecraft and instruments for operation by other agencies; 2. Instruments from collaborating organizations being flown on NASA satellites; and 3. Instruments from NASA being flown on satellites from collaborating organizations. In addition, there are collaborations such as joint science teams, data exchanges, and participation in international organizations to promote interoperability of various data systems. The purpose of this paper is to describe some of the Earth science data-related collaborative efforts in which NASA participates, and highlight a few results relevant to Earth system science research obtained through such collaborations.

  2. Modeling and Capturing Users’ Actions in CSCL Systems for Collaboration Analysis Purposes

    Directory of Open Access Journals (Sweden)

    Manuel Ortega

    2009-03-01

    Full Text Available A significant number of CSCL (Computer-Supported Collaborative Learning environments support the learning of groups of students enabling their collaboration in solving problems. These collaborative environments usually need additional computational support to allow the automatic processing of both the actions carried out by the students and the end solution with the aim of studying the learning process and the validity of the solution proposed to the problem. This process, known as Collaboration and Interaction Analysis, is typically carried out in three phases: observation, abstraction and intervention. In this paper, we propose a methodological approach for the design of mechanisms for the observation phase. This approach provides a set of procedures enabling developers to design observation systems in CSCL environments that capture and model all the information required for comprehensive analyses of the collaboration process and the resulting solution to the problem. This methodological approach is put into practice by means of its use in the design of an observation system in the SPACE-DESIGN (SPecification and Automatic Construction of collaborative Environments of DESIGN collaborative environment.

  3. Information Technology Procurement Authorization (ITPA) Tracking System

    Data.gov (United States)

    Office of Personnel Management — Information Technology Procurement Authorization (ITPA) Tracking System is used for gathering consistent data from U.S. Office of Personnel Management (OPM) program...

  4. A Study on intensifying efficiency for international collaborative development of Advanced Nuclear Energy Technology

    Energy Technology Data Exchange (ETDEWEB)

    Hahn, Dohee; Park, Seongwon; Chang, Moonhee

    2013-08-15

    All the countries of the world are promoting the use of atomic energy to provide against high oil prices, climatic changes, and energy security initiative. A domestic and foreign environment for nuclear energy is changing rapidly and 13 leading countries including Korea are trying to develop advanced technologies on Gen IV nuclear energy system through Gen IV International Forum (GIF). To enhance the effectiveness of the future nuclear energy system development plan, a strategic approach is necessary for GIF program and the connection process with the 4th Nuclear Energy Promotion Program and Nuclear Energy R and D Medium and Long Term 5 year Plan for 2012 ∼ 2016 needs to be prepared. This study was to analyze the global nuclear trends of 2012 and the status of GIF program which is international cooperation activities. Also we examined the domestic R and D status of future nuclear energy systems for developing core technology and commercialization of Gen-IV nuclear energy system. A successful performance of this project enables the effective national cooperation with GIF and promotes the public acceptance by suggesting the technical alternatives for the nuclear safety and the spent fuel management.

  5. Measuring the Impact of a Moving Target: Towards a Dynamic Framework for Evaluating Collaborative Adaptive Interactive Technologies

    OpenAIRE

    O?Grady, Laura; Witteman, Holly; Bender, Jacqueline L; Urowitz, Sara; Wiljer, David; Jadad, Alejandro R

    2009-01-01

    Background Website evaluation is a key issue for researchers, organizations, and others responsible for designing, maintaining, endorsing, approving, and/or assessing the use and impact of interventions designed to influence health and health services. Traditionally, these evaluations have included elements such as content credibility, interface usability, and overall design aesthetics. With the emergence of collaborative, adaptive, and interactive ("Web 2.0") technologies such as wikis and o...

  6. Collaboration on technological innovation in Danish fashion chains: A network perspective

    DEFF Research Database (Denmark)

    Tambo, Torben

    2014-01-01

    and departments stores, technology and service providers, ownership structures and local level supply chain facilities. This paper analyses theoretical and empirical views of innovation in international retail networks using lead actors in the (Danish) fashion industry as a case to highlight how this industry...... in business networks. The network comprises an innovation system that focuses on organisational learning and iterative development of the intended technologies. Implications of the current study are suggestions to brand owners, network partners and retailers on how to identify, understand, support and promote......With brand owners struggling to compete with new products, physical production processes and sourcing logistics, innovation taking place in retail networks is often overlooked. Networks in retailing are comprised by the brand owner, the varieties of single- and multi-brand stores, chains...

  7. Electric Aircraft Systems Technology Development

    Data.gov (United States)

    National Aeronautics and Space Administration — This project looks at multiple manned/unmanned full-scale/sub-scale flying research prototypes that will lead to the integration of electric propulsion technology on...

  8. Developing ''SMART'' equipment and systems through collaborative NERI research and development

    International Nuclear Information System (INIS)

    Harmon, Daryl L.; Chapman, Leon D.; Golay, Michael W.; Maynard, Kenneth P.; SpencerR, Joseph W.

    2000-01-01

    The United States Department of Energy initiated the Nuclear Energy Research Initiative (NERI) to conduct research and development with the objectives of: (1) overcoming the principal technical obstacles to expanded nuclear energy use, (2) advancing the state of nuclear technology to maintain its competitive position in domestic and world markets, and (3) improving the performance, efficiency, reliability, and economics of nuclear energy. Fiscal Year 1999 program funding is $19 Million, with increased finding expected for subsequent years, emphasizing international cooperation. Among the programs selected for funding is the ''Smart Equipment and Systems to Improve Reliability and Safety in Future Nuclear Power Plant Operations''. This program is a 30 month collaborative effort bringing together the technical capabilities of ABB C-E Nuclear Power, Inc. (ABB CENP), Sandia National Laboratories, Duke Engineering and Services (DE and S), Massachusetts Institute of Technology (MIT) and Pennsylvania State University (PSU). The program's goal is to design, develop and evaluate an integrated set of smart equipment and predictive maintenance tools and methodologies that will significantly reduce nuclear plant construction, operation and maintenance costs. To accomplish this goal the Smart Equipment program will: (1) Identify and prioritize nuclear plant equipment that would most likely benefit from adding smart features; (2) Develop a methodology for systematically monitoring the health of individual pieces of equipment implemented with smart features (i.e. smart equipment); (3) Develop a methodology to provide plant operators with real-time information through smart equipment Man-Machine Interfaces (MMI) to support their decision making; (4) Demonstrate the methodology on a targeted component and/or system; (5) Expand the concept to system and plant levels that allow communication and integration of data among smart equipment. This paper will discuss (1) detailed subtask

  9. Developing ''smar'' equipment and systems through collaborative NERI research and development

    International Nuclear Information System (INIS)

    Harmon, Daryl L.; Chapman, Leon D.; Golay, Michael W.; Maynard, Kenneth P.; Spencer, Joseph W.

    2000-01-01

    The United States Department of Energy initiated the Nuclear Energy Research Initiative (NERI) to conduct research and development with the objectives of : (1) overcoming the principal technical obstacles to expanded nuclear energy use, (2) advancing the state of nuclear technology to maintain its competitive position in domestic and world markets, and (3) improving the performance, efficiency, reliability, and economics of nuclear energy. Fiscal Year 1999 program funding is $19 Million, with increased funding expected for subsequent years, emphasizing international cooperation. Among the programs selected for funding is the S mart Equipment and Systems to Improve Reliability and Safety in Future Nuclear Power Plant Operations . This program is a 30 month collaborative effort bringing together the technical capabilities of ABB C-E Nuclear Power, Inc. (ABBCENP), Sandia National Laboratories, Duke Engineering and Services (DEandS), Massachusetts Institute of Technology (MIT) and Pennsylvania State University (PSU). The program's goal is to design, develop and evaluate an integrated set of ''smart'' equipment and predicitve maintenance tools and methodologies that will significantly reduce nuclear plant construction, operation and maintenance costs. To accomplish this goal the ''smart'' quipment program will: 1. Identify the prioritize nulcear plant equipment that would most likely benefit from adding smart features, 2. Developa methodology for systematically monitoring the health of individual pieces of equipment implemented with smart features (i. e. ''smart'' equipment), 3. Developa methodology to provide plant operators with real-time information through ''smart'' equipment Man-Machine Interfaces (MMI) to support their decision making, 4. Demonstrate the methodology on a targeted component and/or system, 5. Expand the concept to system and plant levels that allow communication and integration of data among smart equipment. This paper will discuss (1) detailed

  10. Collaboration, Participation and Technology: The San Joaquin Valley Cumulative Health Impacts Project

    Directory of Open Access Journals (Sweden)

    Jonathan K. London

    2011-11-01

    Full Text Available Community-university partnerships have been shown to produce significant value for both sets of partners by providing reciprocal learning opportunities, (rebuilding bonds of trust, and creating unique venues to formulate and apply research that responds to community interests and informs collaborative solutions to community problems. For such partnerships to be mutually empowering, certain design characteristics are necessary. These include mutual respect for different modes and expressions of knowledge, capacity-building for all parties, and an environment that promotes honest and constructive dialogue about the inevitable tensions associated with the interplay of power/knowledge. This article explores an innovative case of community-university partnerships through participatory action research involving a coalition of environmental justice and health advocates, the San Joaquin Valley Cumulative Health Impacts Project, and researchers affiliated with the University of California, Davis. In particular, we examine how participatory GIS and community mapping can promote co-learning and interdependent science. Keywords Community-based participatory research, environmental justice, Public Participation Geographic Information System

  11. SLICEIT and TAHMO Partnerships: Students Local and International Collaboration for Climate and Environmental Monitoring, Technology Development, Education, Adaptation and Mitigation

    Science.gov (United States)

    Aishlin, P. S.; Selker, J. S.

    2015-12-01

    Climate change understanding and impacts vary by community, yet the global nature of climate change requires international collaboration to address education, monitoring, adaptation and mitigation needs. We propose that effective climate change monitoring and education can be accomplished via student-led local and international community partnerships. By empowering students as community leaders in climate-environmental monitoring and education, as well as exploration of adaptation/mitigation needs, well-informed communities and young leadership are developed to support climate change science moving forward. Piloted 2013-2015, the SLICEIT1 program partnered with TAHMO2 to connect student leaders in North America, Europe and Africa. At the international level, schools in the U.S.A and Netherlands were partnered with schools in Ghana, Kenya, and Uganda for science and cultural exchange. Each school was equipped with a climate or other environmental sensing system, real-time data publication and curricula for both formal and informal science, technology, engineering and math education and skill development. African counterparts in TAHMO's School-2-School program collect critically important data for enhanced on-the-ground monitoring of weather conditions in data-scarce regions of Africa. In Idaho, student designed, constructed and installed weather stations provide real time data for classroom and community use. Student-designed formal educational activities are disseminated to project partners, increasing hands-on technology education and peer-based learning. At the local level, schools are partnered with a local agency, research institute, nonprofit organization, industry and/or community partner that supplies a climate science expert mentor to SLICEIT program leaders and teachers. Mentor engagement is facilitated and secured by program components that directly benefit the mentor's organization and local community via climate/environment monitoring, student workforce

  12. Collaborative and distributed e-research: innovations in technologies, strategies, and applications

    National Research Council Canada - National Science Library

    Juan, Angel A

    2012-01-01

    "This book offers insight into practical and methodological issues related to collaborative e-research and furthers readers understanding of current and future trends in online research and the types...

  13. Collaborating Filtering Community Image Recommendation System Based on Scene

    Directory of Open Access Journals (Sweden)

    He Tao

    2017-01-01

    Full Text Available With the advancement of smart city, the development of intelligent mobile terminal and wireless network, the traditional text information service no longer meet the needs of the community residents, community image service appeared as a new media service. “There are pictures of the truth” has become a community residents to understand and master the new dynamic community, image information service has become a new information service. However, there are two major problems in image information service. Firstly, the underlying eigenvalues extracted by current image feature extraction techniques are difficult for users to understand, and there is a semantic gap between the image content itself and the user’s understanding; secondly, in community life of the image data increasing quickly, it is difficult to find their own interested image data. Aiming at the two problems, this paper proposes a unified image semantic scene model to express the image content. On this basis, a collaborative filtering recommendation model of fusion scene semantics is proposed. In the recommendation model, a comprehensiveness and accuracy user interest model is proposed to improve the recommendation quality. The results of the present study have achieved good results in the pilot cities of Wenzhou and Yan'an, and it is applied normally.

  14. Collaboration in Augmented Reality

    NARCIS (Netherlands)

    Lukosch, S.; Billinghurst, M.; Alem, L.; Kiyokawa, K.

    2015-01-01

    Augmented Reality (AR) is a technology that allows users to view and interact in real time with virtual images seamlessly superimposed over the real world. AR systems can be used to create unique collaborative experiences. For example, co-located users can see shared 3D virtual objects that they

  15. A Novel Group Coordination Protocol for Collaborative Multimedia Systems

    Science.gov (United States)

    1998-01-01

    technology have advanced considerably, ef- ficient group coordination support for applications characterized by synchronous and wide-area groupwork is...As a component within a general coordination architecture for many-to-many groupwork , floor control coexists with proto- cols for reliable ordered...multicast and media synchronization at a sub-application level. Orchestration of multiparty groupwork with fine-grained and fair floor control is an

  16. Recommender Systems in Technology Enhanced Learning

    NARCIS (Netherlands)

    Manouselis, Nikos; Drachsler, Hendrik; Vuorikari, Riina; Hummel, Hans; Koper, Rob

    2010-01-01

    Manouselis, N., Drachsler, H., Vuorikari, R., Hummel, H. G. K., & Koper, R. (2011). Recommender Systems in Technology Enhanced Learning. In P. B. Kantor, F. Ricci, L. Rokach, & B. Shapira (Eds.), Recommender Systems Handbook (pp. 387-415). Berlin: Springer.

  17. Collaborative Economy

    DEFF Research Database (Denmark)

    collaborative economy and tourism Dianne Dredge and Szilvia Gyimóthy PART I - Theoretical explorations 2.Definitions and mapping the landscape in the collaborative economy Szilvia Gyimóthy and Dianne Dredge 3.Business models of the collaborative economy Szilvia Gyimóthy 4.Responsibility and care...... and similar phenomena are among these collective innovations in tourism that are shaking the very bedrock of an industrial system that has been traditionally sustained along commercial value chains. To date there has been very little investigation of these trends, which have been inspired by, amongst other...... in the collaborative economy Dianne Dredge 5.Networked cultures in the collaborative economy Szilvia Gyimóthy 6.Policy and regulatory perspectives in the collaborative economy Dianne Dredge PART II - Disruptions, innovations and transformations 7.Regulating innovation in the collaborative economy: An examination...

  18. Radionuclide Imaging Technologies for Biological Systems

    Energy Technology Data Exchange (ETDEWEB)

    Howell, Calvin R. [Duke Univ., Durham, NC (United States); Reid, Chantal D. [Duke Univ., Durham, NC (United States); Weisenberger, Andrew G. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States)

    2014-05-14

    The main objective of this project is to develop technologies and experimental techniques for studying the dynamics of physiological responses of plants to changes in their interface with the local environment and to educate a new generation of scientists in an interdisciplinary environment of biology, physics and engineering. Also an important goal is to perform measurements to demonstrate the new data that can be produced and made available to the plant-biology community using the imaging technologies and experimental techniques developed in this project. The study of the plant-environment interface includes a wide range of topics in plant physiology, e.g., the root-soil interface, resource availability, impact of herbivores, influence of microbes on root surface, and responses to toxins in the air and soil. The initial scientific motivation for our work is to improve understanding of the mechanisms for physiological responses to abrupt changes in the local environment, in particular, the responses that result in short-term adjustments in resource (e.g., sugars, nutrients and water) allocations. Data of time-dependent responses of plants to environmental changes are essential in developing mechanistic models for substance intake and resource allocation. Our approach is to use radioisotope tracing techniques to study whole-plant and plant organ (e.g., leaves, stems, roots) dynamical responses to abrupt changes in environmental conditions such as concentration of CO2 in the atmosphere, nutrient availability and lighting. To this aim we are collaborating with the Radiation Detector and Imaging Group at the Thomas Jefferson National Laboratory Facility (JLab) to develop gamma-ray and beta particle imaging systems optimized for plant studies. The radioisotope tracing measurements are conducted at the Phytotron facility at Duke University. The Phytotron is a controlled environment plant research facility with a variety of plant growth chambers. One chamber

  19. Recommender Systems in Technology Enhanced Learning

    NARCIS (Netherlands)

    Manouselis, Nikos; Drachsler, Hendrik; Verbert, Katrien; Santos, Olga

    2010-01-01

    Manouselis, N., Drachsler, H., Verbert, K., & Santos, C. S. (Eds.) (2010). Recommender System in Technology Enhanced Learning. Elsevier Procedia Computer Science: Volume 1, Issue 2. Proceedings of the 1st Workshop on Recommender Systems for Technology Enhanced Learning (RecSysTEL). September, 29-30,

  20. Teaching Embedded System Concepts for Technological Literacy

    Science.gov (United States)

    Winzker, M.; Schwandt, A.

    2011-01-01

    A basic understanding of technology is recognized as important knowledge even for students not connected with engineering and computer science. This paper shows that embedded system concepts can be taught in a technological literacy course. An embedded system teaching block that has been used in an electronics module for non-engineers is…

  1. A multi-user selective undo/redo approach for collaborative CAD systems

    Directory of Open Access Journals (Sweden)

    Yuan Cheng

    2014-04-01

    Full Text Available The engineering design process is a creative process, and the designers must repeatedly apply Undo/Redo operations to modify CAD models to explore new solutions. Undo/Redo has become one of most important functions in interactive graphics and CAD systems. Undo/Redo in a collaborative CAD system is also very helpful for collaborative awareness among a group of cooperative designers to eliminate misunderstanding and to recover from design error. However, Undo/Redo in a collaborative CAD system is much more complicated. This is because a single erroneous operation is propagated to other remote sites, and operations are interleaved at different sites. This paper presents a multi-user selective Undo/Redo approach in full distributed collaborative CAD systems. We use site ID and State Vectors to locate the Undo/Redo target at each site. By analyzing the composition of the complex CAD model, a tree-like structure called Feature Combination Hierarchy is presented to describe the decomposition of a CAD model. Based on this structure, the dependency relationship among features is clarified. B-Rep re-evaluation is simplified with the assistance of the Feature Combination Hierarchy. It can be proven that the proposed Undo/Redo approach satisfies the intention preservation and consistency maintenance correctness criteria for collaborative systems.

  2. Collaboration in a competitive healthcare system: negotiation 101 for clinicians.

    Science.gov (United States)

    Clay-Williams, Robyn; Johnson, Andrew; Lane, Paul; Li, Zhicheng; Camilleri, Lauren; Winata, Teresa; Klug, Michael

    2018-04-09

    Purpose The purpose of this paper is to evaluate the effectiveness of negotiation training delivered to senior clinicians, managers and executives, by exploring whether staff members implemented negotiation skills in their workplace following the training, and if so, how and when. Design/methodology/approach This is a qualitative study involving face-to-face interviews with 18 senior clinicians, managers and executives who completed a two-day intensive negotiation skills training course. Interviews were transcribed verbatim, and inductive interpretive analysis techniques were used to identify common themes. Research setting was a large tertiary care hospital and health service in regional Australia. Findings Participants generally reported positive affective and utility reactions to the training, and attempted to implement at least some of the skills in the workplace. The main enabler was provision of a Negotiation Toolkit to assist in preparing and conducting negotiations. The main barrier was lack of time to reflect on the principles and prepare for upcoming negotiations. Participants reported that ongoing skill development and retention were not adequately addressed; suggestions for improving sustainability included provision of refresher training and mentoring. Research limitations/implications Limitations include self-reported data, and interview questions positively elicited examples of training translation. Practical implications The training was well matched to participant needs, with negotiation a common and daily activity for most healthcare professionals. Implementation of the skills showed potential for improving collaboration and problem solving in the workplace. Practical examples of how the skills were used in the workplace are provided. Originality/value To the authors' knowledge, this is the first international study aimed at evaluating the effectiveness of an integrative bargaining negotiation training program targeting executives, senior

  3. Preparing undergraduates for the future of scientific collaboration: Benefits, challenges and technological solutions in Distributed REU Sites

    Science.gov (United States)

    Hubenthal, M.; Anagnos, T.

    2012-12-01

    As research problems increasingly require multi-disciplinary approaches they naturally foster scientific collaborations between geographically distributed colleagues. This increasing trend in scientific research, the rapid evolution of communication technology, cognitive research into distance education, and the current generation of undergraduate students' eagerness to embrace and use technology, increases the relevance of distributed REU sites. Like traditional REU sites that host a cohort of students in one geographic location, distributed REU sites also seek to attract, nurture, and retain students in a STEM career pipeline. Distributed REU sites are unique in that some or all of the interns are geographically distributed during the research period. This arrangement allows the REU site to capitalize on distributed scientific resources such as field sites, research facilities, or human capital. At their core, distributed REU sites are fundamentally constructed of elements that have proven to be effective components of any undergraduate research experience. They also strive to develop and employ specialized programming that leverages collaboration tools through a cyberinfrastructure to enable interns to develop meaningful social and academic relationships with one another. Since 2006 the IRIS Consortium and NEES have facilitated separate, NSF funded, distributed REU Sites. Implementation and evaluations of these programs have revealed a number of successes and benefits. Longitudinal tracking indicates that distributed REU Sites are at least as successful as traditional sites in attracting, nurturing, and retaining students in a STEM career pipeline. A distributed arrangement also offers benefits over a traditional REU site, such as the flexibility to place interns at a variety of institutions with mentors making only an annual commitment to participate. This ensures that all mentors are eager to participate and are concerned with their intern's growth. It also

  4. Experiences from a Real-Time Mobile Collaborative Writing System in an Art Gallery

    DEFF Research Database (Denmark)

    Korn, Matthias; Polli, Anna Maria; Klokmose, Clemens Nylandsted

    We present first experiences from Local Area Artworks, a system enabling collaborative art interpretation on-site, deployed during an exhibition in a local art gallery. Through the system, we explore ways to re-connect people to local places by making use of their personal mobile devices...... as interfaces to the shared physical space. With a collocated collaborative writing system in the semi-public space of a gallery, we encourage local art discussions and provide a platform for the public to actively participate in interpretations of individual artworks. In this paper, we focus on the experiences...

  5. System approach to modeling of industrial technologies

    Science.gov (United States)

    Toropov, V. S.; Toropov, E. S.

    2018-03-01

    The authors presented a system of methods for modeling and improving industrial technologies. The system consists of information and software. The information part is structured information about industrial technologies. The structure has its template. The template has several essential categories used to improve the technological process and eliminate weaknesses in the process chain. The base category is the physical effect that takes place when the technical process proceeds. The programming part of the system can apply various methods of creative search to the content stored in the information part of the system. These methods pay particular attention to energy transformations in the technological process. The system application will allow us to systematize the approach to improving technologies and obtaining new technical solutions.

  6. Rawls's Wide Reflective Equilibrium as a Method for Engaged Interdisciplinary Collaboration: Potentials and Limitations for the Context of Technological Risks.

    Science.gov (United States)

    Doorn, Neelke; Taebi, Behnam

    2018-05-01

    The introduction of new technologies in society is sometimes met with public resistance. Supported by public policy calls for "upstream engagement" and "responsible innovation," recent years have seen a notable rise in attempts to attune research and innovation processes to societal needs, so that stakeholders' concerns are taken into account in the design phase of technology. Both within the social sciences and in the ethics of technology, we see many interdisciplinary collaborations being initiated that aim to address tensions between various normative expectations about science and engineering and the actual outcomes. However, despite pleas to integrate social science research into the ethics of technology, effective normative models for assessing technologies are still scarce. Rawls's wide reflective equilibrium (WRE) is often mentioned as a promising approach to integrate insights from the social sciences in the normative analysis of concrete cases, but an in-depth discussion of how this would work in practice is still lacking. In this article, we explore to what extent the WRE method can be used in the context of technology development. Using cases in engineering and technology development, we discuss three issues that are currently neglected in the applied ethics literature on WRE. The first issue concerns the operationalization of abstract background theories to moral principles. The second issue concerns the inclusiveness of the method and the demand for openness. The third issue is how to establish whether or not an equilibrium has been reached. These issues should be taken into account when applying the methods to real-world cases involving technological risks. Applying the WRE method in the context of engaged interdisciplinary collaboration requires sensitivity for issues of power and representativeness to properly deal with the dynamics between the technical and normative researchers involved as well as society at large.

  7. Unbalanced international collaboration affects adversely the usefulness of countries' scientific output as well as their technological and social impact.

    Science.gov (United States)

    Zanotto, Sonia R; Haeffner, Cristina; Guimarães, Jorge A

    The unbalanced international scientific collaboration as cause of misleading information on the country's contribution to the scientific world output was analyzed. ESI Data Base (Thomson Reuters' InCites), covering the scientific production of 217 active countries in the period 2010-2014 was used. International collaboration implicates in a high percentage (33.1 %) of double-counted world articles, thus impacting qualitative data as citations, impact and impact relative to word. The countries were divided into three groups, according to their individual contribution to the world publications: Group I (24 countries, at least 1 %) representing 83.9 % of the total double-counted world articles. Group II (40 countries, 0.1-0.99 % each). Group III, 153 countries (70.5 %) with international collaboration were: Group I, 43.0 %; Group II, 55.8 % and Group III, 85.2 %. We concluded that very high and unbalanced international collaboration, as presented by many countries, misrepresent the importance of their scientific production, technological and social outputs. Furthermore, it jeopardizes qualitative outputs of the countries themselves, artificially increasing their scientific impact, affecting all fields and therefore, the whole world. The data confirm that when dealing with the qualitative contribution of countries, it is necessary to take in consideration the level of international cooperation because, as seen here, it can and in fact it does create false impression of the real contribution of countries.

  8. Evaluating the Collaborative Ecosystem for an Innovation-Driven Economy: A Systems Analysis and Case Study of Science Parks

    Directory of Open Access Journals (Sweden)

    Min-Ren Yan

    2018-03-01

    Full Text Available National policies for science parks and innovation have been identified as one of the major driving forces for the innovation-driven economy, especially for publicly funded science parks. To investigate this collaborative ecosystem (government-academia-industry for growth and sustainable development, this paper proposes a nation-wide economic impact analysis of science parks and innovation policy based on historical data drawn from one of the globally recognized high-technology industrial clusters in Taiwan. Systems thinking with causal loop analysis are adopted to improve our understanding of the collaborative ecosystem with science park policies. First, from a holistic viewpoint, the role of government in a science parks and innovation ecosystem is reviewed. A systems analysis of an innovation-driven economy with a science park policy is presented as a strategy map for policy implementers. Second, the added economic value and employment of the benchmarked science parks is evaluated from a long range perspective. Third, the concepts of government-academia-industry collaboration and policies to innovation ecosystem are introduced while addressing the measures and performance of innovation and applied R&D in the science parks. We conclude with a discussion of lessons learned and the policy implications of science park development and an innovation ecosystem.

  9. An effective collaborative movie recommender system with cuckoo search

    Directory of Open Access Journals (Sweden)

    Rahul Katarya

    2017-07-01

    Full Text Available Recommender systems are information filtering tools that aspire to predict the rating for users and items, predominantly from big data to recommend their likes. Movie recommendation systems provide a mechanism to assist users in classifying users with similar interests. This makes recommender systems essentially a central part of websites and e-commerce applications. This article focuses on the movie recommendation systems whose primary objective is to suggest a recommender system through data clustering and computational intelligence. In this research article, a novel recommender system has been discussed which makes use of k-means clustering by adopting cuckoo search optimization algorithm applied on the Movielens dataset. Our approach has been explained systematically, and the subsequent results have been discussed. It is also compared with existing approaches, and the results have been analyzed and interpreted. Evaluation metrics such as mean absolute error (MAE, standard deviation (SD, root mean square error (RMSE and t-value for the movie recommender system delivers better results as our approach offers lesser value of the mean absolute error, standard deviation, and root mean square error. The experiment results obtained on Movielens dataset stipulate that the proposed approach may provide high performance regarding reliability, efficiency and delivers accurate personalized movie recommendations when compared with existing methods. Our proposed system (K-mean Cuckoo has 0.68 MAE, which is superior to existing work (0.78 MAE [1] and also has improvement of our previous work (0.75 MAE [2].

  10. Managing the System of Higher Education: Competition or Collaboration?

    Science.gov (United States)

    Maguad, Ben A.

    2018-01-01

    The systems view of quality postulates that product or service quality comes as the result of interactions between various components that comprise a production process. In view of this, most problems in the organization, like an institution of higher education, can be attributed to the system. To be effective, any quality improvement initiative…

  11. Developing Distributed Collaboration Systems at NASA: A Report from the Field

    Science.gov (United States)

    Becerra-Fernandez, Irma; Stewart, Helen; Knight, Chris; Norvig, Peter (Technical Monitor)

    2001-01-01

    Web-based collaborative systems have assumed a pivotal role in the information systems development arena. While business to customers (B-to-C) and business to business (B-to-B) electronic commerce systems, search engines, and chat sites are the focus of attention, web-based systems span the gamut of information systems that were traditionally confined to internal organizational client server networks. For example, the Domino Application Server allows Lotus Notes (trademarked) uses to build collaborative intranet applications and mySAP.com (trademarked) enables web portals and e-commerce applications for SAP users. This paper presents the experiences in the development of one such system: Postdoc, a government off-the-shelf web-based collaborative environment. Issues related to the design of web-based collaborative information systems, including lessons learned from the development and deployment of the system as well as measured performance, are presented in this paper. Finally, the limitations of the implementation approach as well as future plans are presented as well.

  12. A Complexity Approach to Evaluating National Scientific Systems through International Scientific Collaborations

    Science.gov (United States)

    Zelnio, Ryan J.

    2013-01-01

    This dissertation seeks to contribute to a fuller understanding of how international scientific collaboration has affected national scientific systems. It does this by developing three methodological approaches grounded in social complexity theory and applying them to the evaluation of national scientific systems. The first methodology identifies…

  13. International energy technology collaboration and climate change mitigation. Case study 2. Cooperation in Agriculture. R and D on High-Yielding Crop Varieties

    Energy Technology Data Exchange (ETDEWEB)

    Gagnon-Lebrun, F. [Global and Structural Policies Division, Organisation for Economic Co-operation and Development OECD, Paris (France)

    2004-07-01

    Mitigating climate change and achieving stabilisation of greenhouse gas atmospheric concentrations will require deep reductions in global emissions of energy-related carbon dioxide emissions. Developing and disseminating new, low-carbon energy technology will thus be needed. Two previous AIXG papers have focused on possible drivers for such a profound technological change: Technology Innovation, Development and Diffusion, released in June 2003, and International Energy Technology Collaboration and Climate Change Mitigation, released in June 2004. The first of these papers assesses a broad range of technical options for reducing energy-related CO2 emissions. It examines how technologies evolve and the role of research and development efforts, alternative policies, and short-term investment decisions in making long-term options available. It considers various policy tools that may induce technological change, some very specific, and others with broader expected effects. Its overall conclusion is that policies specifically designed to promote technical change, or 'technology push', could play a critical role in making available and affordable new energy technologies. However, such policies would not be sufficient to achieve the Convention's objective in the absence of broader policies. First, because there is a large potential for cuts that could be achieved in the short run with existing technologies; and second, the development of new technologies requires a market pull as much as a technology push. The second paper considers the potential advantages and disadvantages of international energy technology collaboration and transfer for promoting technological change. Advantages of collaboration may consist of lowering R and D costs and stimulating other countries to invest in R and D; disadvantage may include free-riding and the inefficiency of reaching agreement between many actors. This paper sets the context for further discussion on the role of

  14. ADVANCED TECHNOLOGIES OF ELECTRONIC EDUCATIONAL SYSTEMS DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    M. Shishkina

    2011-11-01

    Full Text Available Actual problems and contradictions of electronic educational systems development are described: availability of education, quality of educational services; individualization of education; exposures and advantages in using of computer technology; standardization of technologies and resources. Tendencies of their solution in the view of development of new advanced technologies of e-education are specified. The essence and advantages of using the cloud computing technologies as a new platform of distributed learning are specified. Advanced directions of cloud-based data usage in executive system of education are declared: access management, content management, asset management, communications management.

  15. Tapping into Graduate Students' Collaborative Technology Experience in a Research Methods Class: Insights on Teaching Research Methods in a Malaysian and American Setting

    Science.gov (United States)

    Vasquez-Colina, Maria D.; Maslin-Ostrowski, Pat; Baba, Suria

    2017-01-01

    This case study used qualitative and quantitative methods to investigate challenges of learning and teaching research methods by examining graduate students' use of collaborative technology (i.e., digital tools that enable collaboration and information seeking such as software and social media) and students' computer self-efficacy. We conducted…

  16. FFTF reactor assembly system technology

    International Nuclear Information System (INIS)

    Mangelsdorf, T.A.

    1975-01-01

    An overview is presented of the FFTF reactor and plant together with descriptions of core components, core internals, core system, primary and secondary control rod system, reactor instrumentation, reactor vessel and closure head, and supporting test programs

  17. Collaboration and Competition in the Payment Eco-system

    DEFF Research Database (Denmark)

    Henningsson, Stefan; Hedman, Jonas

    2012-01-01

    parties exchanging goods and services for money (banknotes and coins). Today, payment increasingly onsists of digital representations of money in a globally intertwined system that involve many parties, such as payers, payment services providers, banks, telecom operators, mobile phone manufactures...

  18. Kernel based collaborative recommender system for e-purchasing

    Indian Academy of Sciences (India)

    proposed in order to overcome the traditional problems of CRS. ... known method for matrix factorization that provides the lowest rank ..... Adomavicius G, Tuzhilin A 2005 Toward the next generation of recommender systems: A survey of.

  19. Collaboration for Health Systems Analysis and Innovation (CHESAI ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Adding a social science perspective to the field of health policy and systems research ... Other expected outcomes include publications, teaching material, podcasts, ... implementation of a primary health care reform in a South African province.

  20. Collaborative Object Framework for Adaptive System Optimization, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — TeamVision proposes that we research the feasibility of incorporating an adaptive object based optimization system into an existing multi-user object oriented...

  1. Collaborative Project. Mode and Intermediate Waters in Earth System Models

    Energy Technology Data Exchange (ETDEWEB)

    Sarmiento, Jorge L. [Princeton Univ., NJ (United States); Dufour, Carolina [Princeton Univ., NJ (United States); Rodgers, Keith B. [Princeton Univ., NJ (United States)

    2015-12-16

    The focus of this grant was on diagnosing the physical mechanisms controlling upper ocean water mass formation and carbon distribution in Earth System Models (ESMs), with the goal of improving the physics that controls their formation.

  2. A Technology-Neutral Role-Based Collaboration Model for Software Ecosystems

    DEFF Research Database (Denmark)

    Stanciulescu, Stefan; Rabiser, Daniela; Seidl, Christoph

    2016-01-01

    by contributing a role-based collaboration model for software ecosystems to make such implicit similarities explicit and to raise awareness among developers during their ongoing efforts. We extract this model based on realization artifacts in a specific programming language located in a particular source code......In large-scale software ecosystems, many developers contribute extensions to a common software platform. Due to the independent development efforts and the lack of a central steering mechanism, similar functionality may be developed multiple times by different developers. We tackle this problem...... efforts and information of ongoing development efforts. Finally, using the collaborations defined in the formalism we model real artifacts from Marlin, a firmware for 3D printers, and we show that for the selected scenarios, the five collaborations were sufficient to raise awareness and make implicit...

  3. Strategic alliance for environmental restoration -- An innovative approach to government and industry collaboration for decontamination and decommissioning technology

    International Nuclear Information System (INIS)

    Aker, R.E.

    1997-01-01

    The world's largest environmental cleanup effort is focused upon the DOE weapons complex. These cleanup efforts parallel those which will be required as the commercial nuclear industry reaches the end of licensed life. The Strategic Alliance for Environmental Restoration (Strategic Alliance), reflects the cooperative interest of industry, commercial nuclear utilities, university and national laboratory team members to bring a collaborative best-in-class approach to finding, and providing effective delivery of innovative environmental remediation technologies to the DOE Complex and subsequently to industry. The collaborative team of the Strategic Alliance includes ComEd, Duke Engineering and Services, 3M, ICF Kaiser, Florida International University, Argonne National Laboratory in concert with DOE. The Strategic Alliance approach to technology qualification and deployment provides DOE, through a Cooperative Agreement, with a new way of bringing industry principles to technology research and developed activities. This paper will describe the approach and activities the Strategic Alliance is taking to provide cost effective technology solutions to DOE/Industry needs for decontamination and decommissioning needs

  4. Collaborative evaluation of the Abbott yeast identification system.

    OpenAIRE

    Cooper, B H; Prowant, S; Alexander, B; Brunson, D H

    1984-01-01

    The Abbott yeast identification system (Abbott Laboratories, Diagnostics Division, Irving, Tex.) is a 24-h, instrumental method for identifying medically important yeasts, based on matrix analysis of 19 biochemical reactions and the germ tube test. The system was evaluated in two clinical laboratories by using 179 coded isolates, which included a high percentage of the less frequently encountered species. Based upon results with these coded isolates and from previously obtained laboratory dat...

  5. Enhanced technologies for unattended ground sensor systems

    Science.gov (United States)

    Hartup, David C.

    2010-04-01

    Progress in several technical areas is being leveraged to advantage in Unattended Ground Sensor (UGS) systems. This paper discusses advanced technologies that are appropriate for use in UGS systems. While some technologies provide evolutionary improvements, other technologies result in revolutionary performance advancements for UGS systems. Some specific technologies discussed include wireless cameras and viewers, commercial PDA-based system programmers and monitors, new materials and techniques for packaging improvements, low power cueing sensor radios, advanced long-haul terrestrial and SATCOM radios, and networked communications. Other technologies covered include advanced target detection algorithms, high pixel count cameras for license plate and facial recognition, small cameras that provide large stand-off distances, video transmissions of target activity instead of still images, sensor fusion algorithms, and control center hardware. The impact of each technology on the overall UGS system architecture is discussed, along with the advantages provided to UGS system users. Areas of analysis include required camera parameters as a function of stand-off distance for license plate and facial recognition applications, power consumption for wireless cameras and viewers, sensor fusion communication requirements, and requirements to practically implement video transmission through UGS systems. Examples of devices that have already been fielded using technology from several of these areas are given.

  6. Review & Analysis: Technological Impact on Future Air Force Personnel & Training: Distributed Collaborative Decision-Making, Volume II. Non-Copyrighted Literature Search

    National Research Council Canada - National Science Library

    Palmer, Barbara

    1997-01-01

    ..., compared to that of a single individual. (2) The greatest detriment to collaborative distributed decision making is that we must rely on technology rather than face to face interactions, and subtleties of human communication may be lost. (3...

  7. Network operating system focus technology

    Science.gov (United States)

    1985-01-01

    An activity structured to provide specific design requirements and specifications for the Space Station Data Management System (DMS) Network Operating System (NOS) is outlined. Examples are given of the types of supporting studies and implementation tasks presently underway to realize a DMS test bed capability to develop hands-on understanding of NOS requirements as driven by actual subsystem test beds participating in the overall Johnson Space Center test bed program. Classical operating system elements and principal NOS functions are listed.

  8. Contexts in a Paper Recommendation System with Collaborative Filtering

    Science.gov (United States)

    Winoto, Pinata; Tang, Tiffany Ya; McCalla, Gordon

    2012-01-01

    Making personalized paper recommendations to users in an educational domain is not a trivial task of simply matching users' interests with a paper topic. Therefore, we proposed a context-aware multidimensional paper recommendation system that considers additional user and paper features. Earlier experiments on experienced graduate students…

  9. An Instructional and Collaborative Learning System with Content Recommendation

    Science.gov (United States)

    Zheng, Xiang-wei; Ma, Hong-wei; Li, Yan

    2013-01-01

    With the rapid development of Internet, e-learning has become a new teaching and learning mode. However, lots of e-learning systems deployed on Internet are just electronic learning materials with very limited interactivity and diagnostic capability. This paper presents an integrated e-learning environment named iCLSR. Firstly, iCLSR provides an…

  10. Collaborative User Network Embedding for Social Recommender Systems

    KAUST Repository

    Zhang, Chuxu; Yu, Lu; Wang, Yan; Shah, Chirag; Zhang, Xiangliang

    2017-01-01

    To address the issue of data sparsity and cold-start in recommender system, social information (e.g., user-user trust links) has been introduced to complement rating data for improving the performances of traditional model-based recommendation

  11. Collaborative Protection and Control Schemes for Shipboard Electrical Systems

    Science.gov (United States)

    2007-03-26

    for fast reclosing capability that the CB can provide. Secondly, as it will be shown later, the provision of two primary busses on the system allows...advantages of using a fast reclosing CB are nullified. And thirdly, the maintenance and the paraphernalia (current transducer, CB power supply and relay

  12. Mobile Technology in Science Classrooms: Using iPad-Enabled Constructivist Learning to Promote Collaborative Problem Solving and Chemistry Learning

    Science.gov (United States)

    Ting, Melodie Mirth G.

    Most recently, there has been a noticeable rise in the push for use of technology in the classroom. The advancement in digital science has increased greatly the capacity to explore animations, models, and interesting apps. that should substantially enhance science cognition. At the same time, there is a great need to increase collaboration in the science classroom. There is a concern that the collaborative experience will be lost with the use of technology in the classroom. This study seeks to explore the use of iPads in conjunction with a constructivist learning approach to promote student collaboration. The participants in this study included two sections of 11 th grade AP Chemistry students. Data was generated from different sources such as teacher observations of classroom interactions patterned after Gilles (2004). In order to gauge student perception of working in groups with the use of the iPad, survey questions adapted from Knezek, Mills and Wakefield (2012) and group interviews were used (Galleta, 2013). Learning outcomes were assessed using methods adapted from a study by Lord and Baviskar (2007). Findings of this study showed high percentages of evidence for increased community, productive student group communication, effective feedback through use of the iPads, and value of the interactive apps., but it also showed that students still preferred face-to-face interactions over virtual interactions for certain learning situations. The study showed good content learning outcomes, as well as favorable opinions among the students for the effectiveness of the use of iPads in collaborative settings in the classroom.

  13. Practical Packaging Technology for Microfluidic Systems

    International Nuclear Information System (INIS)

    Lee, Hwan Yong; Han, Song I; Han, Ki Ho

    2010-01-01

    This paper presents the technology for the design, fabrication, and characterization of a microfluidic system interface (MSI): the purpose of this technology is to enable the integration of complex microfluidic systems. The MSI technology can be applied in a simple manner for realizing complex arrangements of microfluidic interconnects, integrated microvalves for fluid control, and optical windows for on-chip optical processes. A microfluidic system for the preparation of genetic samples was used as the test vehicle to prove the effectiveness of the MSI technology for packaging complex microfluidic systems with multiple functionalities. The miniaturized genetic sample preparation system comprised several functional compartments, including compartments for cell purification, cell separation, cell lysis, solid-phase DNA extraction, polymerase chain reaction, and capillary electrophoresis. Additionally, the functional operation of the solid-phase extraction and PCR thermocycling compartments was demonstrated by using the MSI

  14. LDR system concepts and technology

    Science.gov (United States)

    Pittman, B.

    1985-01-01

    The Large Deployable Reflector is a 20 meter diameter infrared/submillimeter telescope planned for the late 1990's. The Astronomy Survey Committee of the National Academy of Sciences (Field Committee) recommended LDR as one of the two space based observatories that should start development in the 80's. LDR's large aperture will give it unequaled resolution in the wavelength range from 30 to 1000 microns. To meet LDR performance goals will call for advances in several technology disciplines including: optics, controls, thermal control, detectors, cryogenic cooling, and large space structures.

  15. The Marine Technology Liguria District, an opportunity for Collaboration and Training

    Science.gov (United States)

    Carmisciano, C.; Tivegna, P.; Sgherri, R. G.; Gambetta, M.; Caratori Tontini, F.; Stefanelli, P.; Cocchi, L.

    2008-05-01

    This work focus on the newly born DLTM, namely the Distretto Ligure delle Tecnologie Marine, based in La Spezia, Liguria Region (IT). The main involved partners are: Ministries, Regione Liguria Council, Spedia SpA Company, Industries, SMEs (SMBs), Universities and National Research Institutes. The DLTM has been created as an answer to the local versus global needs of marine products innovation, technology and science. In order to provide, both the local and international community, effective solutions the DLTM aims to: - promote Innovation and pre-competitiveness of activities related to industrial research; - enhance the value and visibility of excellence areas existing in the Ligurian region (in the big enterprises as well as in SMEs) concerning marine technology; - enhance the value of academic activities focusing their R&D on industrial products/processes, assuring, evaluating and preventing environmental sustainability also in case of extreme events; - harmonize/make sustainable the economy and the society promoting scientific innovation and technological development, by means of Universities, Public and Private Research Institutes (at regional, national and EU level); - help the exchange of ideas and realization of projects aimed at developing the District objectives; - increase the dissemination and valorisation of District results and achievements, build capacity in the sectors of interest to the District. The DLTM is characterized by two main macro-themes. The first concerns infrastructures, materials and processes, while the second is committed to eco-compatible solutions for harbours, ships and coastal scenarios, security and control management of human activities, risky operations and extreme natural events. The former macro-theme is expected to provide the community with innovative solutions, technologies, materials, processes applied to marine sectors, shipyard and related subsystems and components, in a wide sense such as leisure, commercial, navy

  16. Creating Joint Representations of Collaborative Problem Solving with Multi-Touch Technology

    Science.gov (United States)

    Mercier, E.; Higgins, S.

    2014-01-01

    Multi-touch surfaces have the potential to change the nature of computer-supported collaborative learning, allowing more equitable access to shared digital content. In this paper, we explore how large multi-touch tables can be used by groups of students as an external representation of their group interaction processes. Video data from 24 groups…

  17. Educational Technology Research Journals: "International Journal of Computer-Supported Collaborative Learning," 2006-2014

    Science.gov (United States)

    Howland, Shiloh M. J.; Martin, M. Troy; Bodily, Robert; Faulconer, Christian; West, Richard E.

    2015-01-01

    The authors analyzed all research articles from the first issue of the "International Journal of Computer-Supported Collaborative Learning" in 2006 until the second issue of 2014. They determined the research methodologies, most frequently used author-supplied keywords as well as two- and three-word phrases, and most frequently published…

  18. PhD students at Science & Technology exploring student learning in a collaborative video-circle

    DEFF Research Database (Denmark)

    Nielsen, Birgitte Lund; Hougaard, Rikke F.

    examined using video, audio and questionnaires. The TAs reported a high level of outcomes and referred to the importance of the video as evidence supporting the discussions. The importance of the collaboration between peers and staff (educational developers) was emphasized: highlighting the benefit...

  19. Vygotsky Meets Technology: A Reinvention of Collaboration in the Early Childhood Mathematics Classroom

    Science.gov (United States)

    Cicconi, Megan

    2014-01-01

    With the advent of Web 2.0, Vygotsky's traditional role of the more knowledgeable other (MKO) has been transformed. This transformation shifts the power of a facilitator of learning from an elite group of MKOs to all students. Such a transformation possesses significant value in the early childhood mathematics classroom where collaboration is…

  20. Distance Education Faculty and Librarian Collaboration: Developing Technological Skills of School Librarian Candidates

    Science.gov (United States)

    Parrott, Deborah J.; Anderson, Joanna M.

    2015-01-01

    LibGuides, as a method of creating pathfinders for instruction of information literacy and content management has long been used by academic libraries, but has not been widely used by school libraries. This article describes a collaborative plan between a distance education librarian and a professor of school library media using LibGuides to…

  1. One Screen, Many Fingers: Young Children's Collaborative Literacy Play with Digital Puppetry Apps and Touchscreen Technologies

    Science.gov (United States)

    Wohlwend, Karen E.

    2015-01-01

    This article examines the digital literacy practices that emerge when young children play together with digital apps on touchscreen devices. Children's collaborative composing with a digital puppetry app on a touchscreen--with many hands all busy dragging, resizing, and animating puppet characters, and many voices making sound effects, narrating,…

  2. Maximizing potential: innovative collaborative strategies between one-stops and mental health systems of care.

    Science.gov (United States)

    Boeltzig, Heike; Timmons, Jaimie Ciulla; Marrone, Joe

    2008-01-01

    Barriers to seamless service delivery between workforce development and mental health systems of care have kept both entities from maximizing their potential in regards to employment for job seekers with mental illness who are capable of work and seeking employment. Using a multiple case study design, this study examined the nature of collaboration between workforce development and mental health systems to understand the policies and practices in place to assist individuals with mental illness to find and keep work. The paper presents innovative strategies that involved staff from both workforce development and mental health agencies. Findings from this research identified the following collaborative strategies: (a) the creation of liaison positions and collaborative teams; (b) staff training on mental health and workforce issues; and (c) multi-level involvement of individuals with mental illness. Implications for workforce professionals are offered as a way to stimulate implementation of such strategies.

  3. International Collaboration in Packaging Education: Hands-on System-on-Package (SOP) Graduate Level Courses at Indian Institute of Science and Georgia Tech PRC

    OpenAIRE

    Varadarajan, Mahesh; Bhattacharya, Swapan; Doraiswami, Ravi; Rao, Ananda G; Rao, NJ; May, Gary; Conrad, Leyla; Tummala, Rao

    2005-01-01

    System-on-Package (SOP) continues to revolutionize the realization of convergent systems in microelectronics packaging. The SOP concept which began at the Packaging Research Center (PRC) at Georgia Tech has benefited its international collaborative partners in education including the Indian Institute of Science (IISc). The academic program for electronics packaging currently in the Centre for Electronics Design and Technology (CEDT) at IISc is aimed at educating a new breed of globally-compet...

  4. Combining Cloud-based Workflow Management System with SOA and CEP to Create Agility in Collaborative Environment

    Directory of Open Access Journals (Sweden)

    Marian STOICA

    2017-01-01

    Full Text Available In current economy, technological solutions like cloud computing, service-oriented architecture (SOA and complex event processing (CEP are recognized as modern approaches used for increasing the business agility and achieving innovation. The complexity of collaborative business environment raises more and more the need for performant workflow management systems (WfMS that meet current requirements. Each approach has advantages, but also faces challenges. In this paper we propose a solution for integration of cloud computing with WfMS, SOA and CEP that allows these technologies to complete each other and bank on their benefits to increase agility and reduce the challenges/problems. The paper presents a short introduction in the subject, followed by an analysis of the combination between cloud computing and WfMS and the benefits of cloud based workflow management system. The paper ends with a solution for combining cloud WfMS with SOA and CEP in order to gain business agility and real time collaboration, followed by conclusions and research directions.

  5. MMIC technology for advanced space communications systems

    Science.gov (United States)

    Downey, A. N.; Connolly, D. J.; Anzic, G.

    The current NASA program for 20 and 30 GHz monolithic microwave integrated circuit (MMIC) technology is reviewed. The advantages of MMIC are discussed. Millimeter wavelength MMIC applications and technology for communications systems are discussed. Passive and active MMIC compatible components for millimeter wavelength applications are investigated. The cost of a millimeter wavelength MMIC's is projected.

  6. MMIC technology for advanced space communications systems

    Science.gov (United States)

    Downey, A. N.; Connolly, D. J.; Anzic, G.

    1984-01-01

    The current NASA program for 20 and 30 GHz monolithic microwave integrated circuit (MMIC) technology is reviewed. The advantages of MMIC are discussed. Millimeter wavelength MMIC applications and technology for communications systems are discussed. Passive and active MMIC compatible components for millimeter wavelength applications are investigated. The cost of a millimeter wavelength MMIC's is projected.

  7. Lunar Surface Systems Supportability Technology Development Roadmap

    Science.gov (United States)

    Oeftering, Richard C.; Struk, Peter M.; Green, Jennifer L.; Chau, Savio N.; Curell, Philip C.; Dempsey, Cathy A.; Patterson, Linda P.; Robbins, William; Steele, Michael A.; DAnnunzio, Anthony; hide

    2011-01-01

    The Lunar Surface Systems Supportability Technology Development Roadmap is a guide for developing the technologies needed to enable the supportable, sustainable, and affordable exploration of the Moon and other destinations beyond Earth. Supportability is defined in terms of space maintenance, repair, and related logistics. This report considers the supportability lessons learned from NASA and the Department of Defense. Lunar Outpost supportability needs are summarized, and a supportability technology strategy is established to make the transition from high logistics dependence to logistics independence. This strategy will enable flight crews to act effectively to respond to problems and exploit opportunities in an environment of extreme resource scarcity and isolation. The supportability roadmap defines the general technology selection criteria. Technologies are organized into three categories: diagnostics, test, and verification; maintenance and repair; and scavenge and recycle. Furthermore, "embedded technologies" and "process technologies" are used to designate distinct technology types with different development cycles. The roadmap examines the current technology readiness level and lays out a four-phase incremental development schedule with selection decision gates. The supportability technology roadmap is intended to develop technologies with the widest possible capability and utility while minimizing the impact on crew time and training and remaining within the time and cost constraints of the program.

  8. Ship Technology Workshop Materials from Collaboration with Mexico to Reduce Emissions from Ships

    Science.gov (United States)

    On September 26, 2012, a ship technology seminar was held to provide Mexican stakeholders with information about some of the ship technologies needed to meet the requirements of MARPOL Annex VI and an ECA.

  9. Skylab technology electrical power system

    Science.gov (United States)

    Woosley, A. P.; Smith, O. B.; Nassen, H. S.

    1974-01-01

    The solar array/battery power systems for the Skylab vehicle were designed to operate in a solar inertial pointing mode to provide power continuously to the Skylab. Questions of power management are considered, taking into account difficulties caused by the reduction in power system performance due to the effects of structural failure occurring during the launching process. The performance of the solar array of the Apollo Telescope Mount Power System is discussed along with the Orbital Workshop solar array performance and the Airlock Module power conditioning group performance. A list is presented of a number of items which have been identified during mission monitoring and are recommended for electrical power system concepts, designs, and operation for future spacecraft.

  10. Applying Sustainable Systems Development Approach to Educational Technology Systems

    Science.gov (United States)

    Huang, Albert

    2012-01-01

    Information technology (IT) is an essential part of modern education. The roles and contributions of technology to education have been thoroughly documented in academic and professional literature. Despite the benefits, the use of educational technology systems (ETS) also creates a significant impact on the environment, primarily due to energy…

  11. Collaborative Middle School Geometry through Blogs and Other Web 2.0 Technologies

    Science.gov (United States)

    Hossain, Mokter; Wiest, Lynda R.

    2013-01-01

    This paper explores the use of blogs, a simple application of Web 2.0 technologies, in middle school geometry instruction. Specifically, it provides an overview of the interactive features of Web 2.0 technologies and the feasibility of using Web 2.0 technologies in geometry teaching and learning, as well as a proposed model for creating a…

  12. A task-driven design model for collaborative AmI systems

    OpenAIRE

    Arroyo, Roberto F.; Gea, Miguel; Garrido, José Luis; Haya, Pablo A.

    2006-01-01

    Proceedings of the CAISE*06 Workshop on Ubiquitous Mobile Information and Collaboration Systems UMICS '06. Luxemburg, June 5-9, 2006. The proceedings of this workshop also appeared in printed version In T. Latour and M. Petit (eds), Proceedings of Workshops and Doctoral Consortium, The 18th International Conference on Advanced Information Systems Engineering - Trusted Information Systems (CAiSE'06), June 5-9, 2006, Presses Universitaires de Namur, 2006, ISBN 2-87037-525. Also publishe...

  13. eHealth Technology Competencies for Health Professionals Working in Home Care to Support Older Adults to Age in Place: Outcomes of a Two-Day Collaborative Workshop.

    Science.gov (United States)

    Barakat, Ansam; Woolrych, Ryan D; Sixsmith, Andrew; Kearns, William D; Kort, Helianthe S M

    2013-01-01

    The demand for care is increasing, whereas in the near future the number of people working in professional care will not match with the demand for care. eHealth technology can help to meet the growing demand for care. Despite the apparent positive effects of eHealth technology, there are still barriers to technology adoption related to the absence of a composite set of knowledge and skills among health care professionals regarding the use of eHealth technology. The objective of this paper is to discuss the competencies required by health care professionals working in home care, with eHealth technologies such as remote telecare and ambient assisted living (AAL), mobile health, and fall detection systems. A two-day collaborative workshop was undertaken with academics across multiple disciplines with experience in working on funded research regarding the application and development of technologies to support older people. The findings revealed that health care professionals working in home care require a subset of composite skills as well as technology-specific competencies to develop the necessary aptitude in eHealth care. This paper argues that eHealth care technology skills must be instilled in health care professionals to ensure that technologies become integral components of future care delivery, especially to support older adults to age in place. Educating health care professionals with the necessary skill training in eHealth care will improve service delivery and optimise the eHealth care potential to reduce costs by improving efficiency. Moreover, embedding eHealth care competencies within training and education for health care professionals ensures that the benefits of new technologies are realized by casting them in the context of the larger system of care. These care improvements will potentially support the independent living of older persons at home. This paper describes the health care professionals' competencies and requirements needed for the use of e

  14. The Collaborative Dimension of Conflict Management in the Educational System

    Directory of Open Access Journals (Sweden)

    Constanta POPESCU

    2012-11-01

    Full Text Available The increasing number of conflicts in an organization is an alarm signal for the managerial conduct management in the educational system, in which the specific line, drawn on losses in the human values prevailing over the financial ones, requires careful monitoring of the conflicting tensions even from the first signs of their occurrence. The conflict management in the educational space refers to the process of specific planning of the management activity for the purposes of increasing the probability of avoiding conflicts, of organizing steps to reduce, resolve and / or solve the manifesting conflicts, in "a manner as fair and expeditious as possible" and of implementing ways of impact pozitivation in the learning organization.

  15. Collaborative User Network Embedding for Social Recommender Systems

    KAUST Repository

    Zhang, Chuxu

    2017-06-09

    To address the issue of data sparsity and cold-start in recommender system, social information (e.g., user-user trust links) has been introduced to complement rating data for improving the performances of traditional model-based recommendation techniques such as matrix factorization (MF) and Bayesian personalized ranking (BPR). Although effective, the utilization of the explicit user-user relationships extracted directly from such social information has three main limitations. First, it is difficult to obtain explicit and reliable social links. Only a small portion of users indicate explicitly their trusted friends in recommender systems. Second, the “cold-start” users are “cold” not only on rating but also on socializing. There is no significant amount of explicit social information that can be useful for “cold-start” users. Third, an active user can be socially connected with others who have different taste/preference. Direct usage of explicit social links may mislead recommendation. To address these issues, we propose to extract implicit and reliable social information from user feedbacks and identify top-k semantic friends for each user. We incorporate the top-k semantic friends information into MF and BPR frameworks to solve the problems of ratings prediction and items ranking, respectively. The experimental results on three real-world datasets show that our proposed approaches achieve better results than the state-of-the-art MF with explicit social links (with 3.0% improvement on RMSE), and social BPR (with 9.1% improvement on AUC).

  16. Future Automotive Systems Technology Simulator (FASTSim)

    Energy Technology Data Exchange (ETDEWEB)

    2018-04-11

    An advanced vehicle powertrain systems analysis tool, the Future Automotive Systems Technology Simulator (FASTSim) provides a simple way to compare powertrains and estimate the impact of technology improvements on light-, medium- and heavy-duty vehicle efficiency, performance, cost, and battery life. Created by the National Renewable Energy Laboratory, FASTSim accommodates a range of vehicle types - including conventional vehicles, electric-drive vehicles, and fuel cell vehicles - and is available for free download in Microsoft Excel and Python formats.

  17. A Study to Promote a Collaboration of R and D for Nuclear Energy Technology Development between Korea and Kazakhstan

    Energy Technology Data Exchange (ETDEWEB)

    Ryh, Sipyo; Kim, Cheoljung; Yoo, Bungduk; Lee, Yongjoo; Kim, Hansoo; Yoon, Sungwon; Jeong, Hwansam; Jeong, Gijung

    2005-01-15

    The ultimate goal of this investigation to promote a collaboration of R and D for Nuclear Energy Technology Development between Korea and Kazakhstan. To understand the research power of the Kazakhstan, we visited the INP(Institute of Nuclear Physics) which is one of the branch of Nation Cuclear Center-Repunlic Kazakhstan. We presented the present status of the nuclear energy related research in KAERI. The director of international cooperation in the ministry of Mineral resources, the director of INP and vice director of IAE had visited KAERI, KIRAM and discussed about potential cooperation in nuclear research related field.

  18. University of Tennessee - Industry collaborative research and development in preventive maintenance technology

    International Nuclear Information System (INIS)

    Upadhyaya, B.R.

    1992-01-01

    The Preventive Maintenance Engineering Laboratory (PMEL) was inaugurated at the University of Tennessee Nuclear Engineering Department in September 1989. The startup funding was provided by Gilbert/Commonwealth, Inc. The purpose of PMEL is to identify maintenance-related problems in the power and process industries and to find their solutions through the development and application of emerging technologies. These include advanced digital signal processing, applied artificial intelligence (AI), artificial neural networks, and reliability based methods. The Laboratory activities are being expanded by the formation of an industrial consortium within the Measurement and Control Engineering Center at the University of Tennessee. Several research and development projects in preventive maintenance are being carried out. These include condition monitoring of air operated valves, automated diagnostics of motor operated valves, instrument calibration, verification, and estimation of expected residual life of electric motors using applied AI technology and reliability-based methods. The new methodology will be applied to other industrial subsystems. A long-term research and development project is being sponsored by the T.V.A. Nuclear Maintenance Department. The overall objective of the research program is to develop and apply advanced artificial intelligence and information processing methods to the problems of plant performance monitoring and preventive maintenance. The program includes the development of a workstation/PC-based, networking of plant information for easy access to operational and management personnel, implementation of a sensor verification system, monitoring of feedwater flow venturi fouling and heat rate balance, and integration of signal validation, command validation, and fault-tolerant control strategies

  19. Experiences from a Real-Time Mobile Collaborative Writing System in an Art Gallery

    DEFF Research Database (Denmark)

    Korn, Matthias; Polli, Anna Maria; Klokmose, Clemens Nylandsted

    as interfaces to the shared physical space. With a collocated collaborative writing system in the semi-public space of a gallery, we encourage local art discussions and provide a platform for the public to actively participate in interpretations of individual artworks. In this paper, we focus on the experiences...

  20. A Portfolio for Optimal Collaboration of Human and Cyber Physical Production Systems in Problem-Solving

    Science.gov (United States)

    Ansari, Fazel; Seidenberg, Ulrich

    2016-01-01

    This paper discusses the complementarity of human and cyber physical production systems (CPPS). The discourse of complementarity is elaborated by defining five criteria for comparing the characteristics of human and CPPS. Finally, a management portfolio matrix is proposed for examining the feasibility of optimal collaboration between them. The…

  1. Enabling Support of Collaborative Cross-enterprise Business Processes for Legacy ERP Systems

    Directory of Open Access Journals (Sweden)

    Gundars Alksnis

    2015-04-01

    Full Text Available In order to create innovative business products, share knowledge between people and businesses, or increase the control and quality of services, more and more often enterprise business processes involve in collaborations by delegating or providing some pieces of work to other enterprises. Necessity to cooperate in the cross-enterprise setting leads to Collaborative Business Processes (CBPs. The difference between CBPs and Business Processes (BPs is in the decentralized coordination, flexible backward recovery, participants notification about the state, efficient adaptability to changes, presence of multiple information systems, and individual authorization settings. In the paper we consider a specific case of CBPs where multiple collaborating partners use Enterprise Resource Planning (ERP system of the same vendor. The vendor can see (e.g., monitor the changes of data elements, but does not have explicit process awareness in the ERP system to support flow of activities in the cross-enterprise setting. The paper also discusses different settings of cross-enterprise CBP and shows simplified enterprise models behind the vendor possibilities to positively impact collaborative processes. The restrictions of the vendor are implicit information flows in BP, diversity of ERP integrations with third party Information Systems (IS, the lack of mechanisms for monitoring BP instances, backward recovery, user notification about the current state and tasks, and inability to make explicit changes in customers’ ISs.

  2. Robust client/server shared state interactions of collaborative process with system crash and network failures

    NARCIS (Netherlands)

    Wang, Lei; Wombacher, Andreas; Ferreira Pires, Luis; van Sinderen, Marten J.; Chi, Chihung

    With the possibility of system crashes and network failures, the design of robust client/server interactions for collaborative process execution is a challenge. If a business process changes state, it sends messages to relevant processes to inform about this change. However, server crashes and

  3. A Conceptual Model for Analysing Collaborative Work and Products in Groupware Systems

    Science.gov (United States)

    Duque, Rafael; Bravo, Crescencio; Ortega, Manuel

    Collaborative work using groupware systems is a dynamic process in which many tasks, in different application domains, are carried out. Currently, one of the biggest challenges in the field of CSCW (Computer-Supported Cooperative Work) research is to establish conceptual models which allow for the analysis of collaborative activities and their resulting products. In this article, we propose an ontology that conceptualizes the required elements which enable an analysis to infer a set of analysis indicators, thus evaluating both the individual and group work and the artefacts which are produced.

  4. Energy technology sources, systems and frontier conversion

    CERN Document Server

    Ohta, Tokio

    1994-01-01

    This book provides a concise and technical overview of energy technology: the sources of energy, energy systems and frontier conversion. As well as serving as a basic reference book for professional scientists and students of energy, it is intended for scientists and policy makers in other disciplines (including practising engineers, biologists, physicists, economists and managers in energy related industries) who need an up-to-date and authoritative guide to the field of energy technology.Energy systems and their elemental technologies are introduced and evaluated from the view point

  5. Combinations of Methods for Collaborative Evaluation of the Usability of Interactive Software Systems

    Directory of Open Access Journals (Sweden)

    Andrés Solano

    2016-01-01

    Full Text Available Usability is a fundamental quality characteristic for the success of an interactive system. It is a concept that includes a set of metrics and methods in order to obtain easy-to-learn and easy-to-use systems. Usability Evaluation Methods, UEM, are quite diverse; their application depends on variables such as costs, time availability, and human resources. A large number of UEM can be employed to assess interactive software systems, but questions arise when deciding which method and/or combination of methods gives more (relevant information. We propose Collaborative Usability Evaluation Methods, CUEM, following the principles defined by the Collaboration Engineering. This paper analyzes a set of CUEM conducted on different interactive software systems. It proposes combinations of CUEM that provide more complete and comprehensive information about the usability of interactive software systems than those evaluation methods conducted independently.

  6. Comulang: towards a collaborative e-learning system that supports student group modeling.

    Science.gov (United States)

    Troussas, Christos; Virvou, Maria; Alepis, Efthimios

    2013-01-01

    This paper describes an e-learning system that is expected to further enhance the educational process in computer-based tutoring systems by incorporating collaboration between students and work in groups. The resulting system is called "Comulang" while as a test bed for its effectiveness a multiple language learning system is used. Collaboration is supported by a user modeling module that is responsible for the initial creation of student clusters, where, as a next step, working groups of students are created. A machine learning clustering algorithm works towards group formatting, so that co-operations between students from different clusters are attained. One of the resulting system's basic aims is to provide efficient student groups whose limitations and capabilities are well balanced.

  7. AN EVALUATION AND IMPLEMENTATION OF COLLABORATIVE AND SOCIAL NETWORKING TECHNOLOGIES FOR COMPUTER EDUCATION

    OpenAIRE

    Ronnie Cheung; Calvin Wan

    2011-01-01

    We have developed a collaborative and social networking environment that integrates the knowledge and skills in communication and computing studies with a multimedia development project. The outcomes of the students’ projects show that computer literacy can be enhanced through a cluster of communication, social, and digital skills. Experience in implementing a web-based social networking environment shows that the new media is an effective means of enriching knowledge by sharing in computer l...

  8. Learners perceptions of technology for design of a collaborative mLearning module

    Directory of Open Access Journals (Sweden)

    Dorothy Dewitt, Saedah Siraj

    2010-12-01

    Full Text Available In Malaysian schools the learning of science does not reflect the nature of science. An instructional module which could address the need for teaching science through a process of scientific discovery and collaboration is required. A developmental research approach with three phases was used to design a collaborative m-Learning module for a topic in s c i e n c e . I n t h e f i r s t p h a s e o f a n a l y s i s , a s u r v e y o f 1 5 8 s t u d e n t s ’ u s e o f t e c h n o l o g y a n d t h e p e r c e p t i o n o f t h e u s e o f computers and mobile phones was completed. Data from the analysis phase indicated the students’ readiness in using online tools such as discussion forums and text messaging with mobiles for learning. Computers were perceived to be useful for learning, but mobile phones were not. The findings from the first phase were used to determine the learning tools to utilize in the design of the module in the second phase. The online learning tools used are wikis and discussion forums. In addition, text messaging using the mobile phone was also employed for individualized quizzes. The collaborative m-Learning module designed, was evaluated by experts for further improvements. The findings indicate that the experts agree that a collaborative Learning module with a variety of learning tools such as wikis, discussion forum and text messaging, could be used for teaching science. In addition, this module could also be used for teaching other subjects.

  9. Collaborative interactive visualization: exploratory concept

    Science.gov (United States)

    Mokhtari, Marielle; Lavigne, Valérie; Drolet, Frédéric

    2015-05-01

    Dealing with an ever increasing amount of data is a challenge that military intelligence analysts or team of analysts face day to day. Increased individual and collective comprehension goes through collaboration between people. Better is the collaboration, better will be the comprehension. Nowadays, various technologies support and enhance collaboration by allowing people to connect and collaborate in settings as varied as across mobile devices, over networked computers, display walls, tabletop surfaces, to name just a few. A powerful collaboration system includes traditional and multimodal visualization features to achieve effective human communication. Interactive visualization strengthens collaboration because this approach is conducive to incrementally building a mental assessment of the data meaning. The purpose of this paper is to present an overview of the envisioned collaboration architecture and the interactive visualization concepts underlying the Sensemaking Support System prototype developed to support analysts in the context of the Joint Intelligence Collection and Analysis Capability project at DRDC Valcartier. It presents the current version of the architecture, discusses future capabilities to help analyst(s) in the accomplishment of their tasks and finally recommends collaboration and visualization technologies allowing to go a step further both as individual and as a team.

  10. Islet Transplantation without Borders Enabling islet transplantation in Greece with international collaboration and innovative technology

    Science.gov (United States)

    Papas, Klearchos K; Karatzas, Theodore; Berney, Thierry; Minor, Thomas; Pappas, Paris; Pattou, François; Shaw, James; Toso, Christian; Schuurman, Henk-Jan

    2012-01-01

    Recently, initiatives have been undertaken to establish an islet transplantation program in Athens, Greece. A major hurtle is the high cost associated with the establishment and maintenance of a clinical-grade islet manufacturing center. A collaboration was established with the University Hospitals of Geneva, Switzerland, to enable remote islet cell manufacturing with an established and validated fully operational team. However, remote islet manufacturing requires shipment of the pancreas from the procurement to the islet manufacturing site (in this case from anywhere in Greece to Geneva) and then shipment of the islets from the manufacturing site to the transplant site (from Geneva to Athens). To address challenges related to cold ischemia time of the pancreas and shipment time of islets, a collaboration was initiated with the University of Arizona, Tucson, USA. An international workshop was held in Athens, December 2011, to mark the start of this collaborative project. Experts in the field presented in three main sessions: [1] Islet transplantation: state-of-the-art, and the “network approach”; [2] Technical aspects of clinical islet transplantation and outcomes; and [3] Islet manufacturing – from the donated pancreas to the islet product. This manuscript presents a summary of the workshop. PMID:23330863

  11. AN EVALUATION AND IMPLEMENTATION OF COLLABORATIVE AND SOCIAL NETWORKING TECHNOLOGIES FOR COMPUTER EDUCATION

    Directory of Open Access Journals (Sweden)

    Ronnie Cheung

    2011-06-01

    Full Text Available We have developed a collaborative and social networking environment that integrates the knowledge and skills in communication and computing studies with a multimedia development project. The outcomes of the students’ projects show that computer literacy can be enhanced through a cluster of communication, social, and digital skills. Experience in implementing a web-based social networking environment shows that the new media is an effective means of enriching knowledge by sharing in computer literacy projects. The completed assignments, projects, and self-reflection reports demonstrate that the students were able to achieve the learning outcomes of a computer literacy course in multimedia development. The students were able to assess the effectiveness of a variety of media through the development of media presentations in a web-based, social-networking environment. In the collaborative and social-networking environment, students were able to collaborate and communicate with their team members to solve problems, resolve conflicts, make decisions, and work as a team to complete tasks. Our experience has shown that social networking environments are effective for computer literacy education, and the development of the new media is emerging as the core knowledge for computer literacy education.

  12. Information systems and computing technology

    CERN Document Server

    Zhang, Lei

    2013-01-01

    Invited papersIncorporating the multi-cross-sectional temporal effect in Geographically Weighted Logit Regression K. Wu, B. Liu, B. Huang & Z. LeiOne shot learning human actions recognition using key posesW.H. Zou, S.G. Li, Z. Lei & N. DaiBand grouping pansharpening for WorldView-2 satellite images X. LiResearch on GIS based haze trajectory data analysis system Y. Wang, J. Chen, J. Shu & X. WangRegular papersA warning model of systemic financial risks W. Xu & Q. WangResearch on smart mobile phone user experience with grounded theory J.P. Wan & Y.H. ZhuThe software reliability analysis based on

  13. Siemens: Smart Technologies for Large Control Systems

    CERN Multimedia

    CERN. Geneva; BAKANY, Elisabeth

    2015-01-01

    The CERN Large Hadron Collider (LHC) is known to be one of the most complex scientific machines ever built by mankind. Its correct functioning relies on the integration of a multitude of interdependent industrial control systems, which provide different and essential services to run and protect the accelerators and experiments. These systems have to deal with several millions of data points (e.g. sensors, actuators, configuration parameters, etc…) which need to be acquired, processed, archived and analysed. Since more than 20 years, CERN and Siemens have developed a strong collaboration to deal with the challenges for these large systems. The presentation will cover the current work on the SCADA (Supervisory Control and Data Acquisition) systems and Data Analytics Frameworks.

  14. Collaborative engagement experiment (CEE)

    Science.gov (United States)

    Wade, Robert L.; Reames, Joseph M.

    2005-05-01

    Unmanned ground and air systems operating in collaboration have the potential to provide future Joint Forces a significant capability for operations in complex terrain. Ground and air collaborative engagements potentially offer force conservation, perform timely acquisition and dissemination of essential combat information, and can eliminate high value and time critical targets. These engagements can also add considerably to force survivability by reducing soldier and equipment exposure during critical operations. The Office of the Secretary of Defense, Joint Robotics Program (JRP) sponsored Collaborative Engagement Experiment (CEE) is a consolidation of separate Air Force, Army and Navy collaborative efforts to provide a Joint capability. The Air Force Research Laboratory (AFRL), Material and Manufacturing Directorate, Aerospace Expeditionary Force Division, Force Protection Branch (AFRLMLQF), The Army Aviation and Missile Research, Development and Engineering Center (AMRDEC) Joint Technology Center (JTC)/Systems Integration Laboratory (SIL), and the Space and Naval Warfare Systems Center-San Diego (SSC San Diego) are conducting technical research and proof of principle for an envisioned operational concept for extended range, three dimensional, collaborative operations between unmanned systems, with enhanced situational awareness for lethal operations in complex terrain. This program will assess information requirements and conduct experiments to identify and resolve technical risks for collaborative engagements using Unmanned Ground Vehicles (UGVs) and Unmanned Aerial Vehicles (UAVs). It will research, develop and physically integrate multiple unmanned systems and conduct live collaborative experiments. Modeling and Simulation systems will be upgraded to reflect engineering fidelity levels to greater understand technical challenges to operate as a team. This paper will provide an update of a multi-year program and will concentrate primarily on the JTC

  15. Field bus technology in accelerator control systems

    International Nuclear Information System (INIS)

    Tang Shuming

    1999-01-01

    Since eighties to now, the computer technology, network communication and ULSI technology have been developing rapidly. The level of control for industries and scientific experiments has been upgraded accordingly, so as to meet the increasing requirements for automation. The control systems become more complicated; the devices in control systems become more and more intelligent. However the cost of DCS (Distributed Control System) is quite expensive and the period of system integration is very long. More than ten measurement results for two methods defined in the world, in order to get inter operability of intelligent devices and reduce the costs. The author presents the development trend of fieldbuses briefly and describes the main performances of CAN, LONWORKS, WOLDFIP and PROFIBUS which are mainly used in the world today. The author proposes that the field bus technology will be introduced into the accelerator control systems in the country

  16. Design Technology for Heterogeneous Embedded Systems

    CERN Document Server

    O'Connor, Ian; Piguet, Christian

    2012-01-01

    Designing technology to address the problem of heterogeneous embedded systems, while remaining compatible with standard “More Moore” flows, i.e. capable of handling simultaneously both silicon complexity and system complexity, represents one of the most important challenges facing the semiconductor industry today. While the micro-electronics industry has built its own specific design methods to focus mainly on the management of complexity through the establishment of abstraction levels, the emergence of device heterogeneity requires new approaches enabling the satisfactory design of physically heterogeneous embedded systems for the widespread deployment of such systems. This book, compiled largely from a set of contributions from participants of past editions of the Winter School on Heterogeneous Embedded Systems Design Technology (FETCH), proposes a broad and holistic overview of design techniques used to tackle the various facets of heterogeneity in terms of technology and opportunities at the physical ...

  17. Technological Criteria Technology-Environmental under a Systemic Approach: Chemistry Technology Transfer

    Directory of Open Access Journals (Sweden)

    Durán-García Martín Enrique

    2014-07-01

    Full Text Available Currently the transfer of chemical technology is a process that contributes to the technology policy of a country, an industry or an organization in general chemistry. This process requires the application of clear criteria for the proper development of the complex interrelations in the transfer of chemical technology. A group of criteria that are present, are those related to environmental technology which intrinsically define the technology and its impact to the environment. Therefore, the transfer of chemical technology requires technological-environmental criteria defining, in conjunction with other criteria, an adequate process for the selection, acquisition and incorporation of technology in a holistic perspective, so it provides feasible solutions the chemical industry in pursuit of their goals. Then the criterion becomes a benchmark for assessing an appropriate technology transfer process. We performed a theoretical analysis of the technological and environmental criteria, proposing thirty-six (36 technological-environmental criteria interrelated under a systemic approach in the process of transfer of chemical technology, focused on a methodological cycle first run, based primarily on the research-action method. Future research is expected to make a refinement of the criteria from the formulation and validation of metrics so that necessary adjustments are made to optimize the process of transfer of chemical technology.

  18. Plans for a Collaboratively Developed Distributed Control System for the Spallation Neutron Source

    International Nuclear Information System (INIS)

    DeVan, W.R.; Gurd, D.P.; Hammonds, J.; Lewis, S.A.; Smith, J.D.

    1999-01-01

    The Spallation Neutron Source (SNS) is an accelerator-based pulsed neutron source to be built in Oak Ridge, Tennessee. The facility has five major sections - a ''front end'' consisting of a 65 keV H - ion source followed by a 2.5 MeV RFQ; a 1 GeV linac; a storage ring; a 1MW spallation neutron target (upgradeable to 2 MW); the conventional facilities to support these machines and a suite of neutron scattering instruments to exploit them. These components will be designed and implemented by five collaborating institutions: Lawrence Berkeley National Laboratory (Front End), Los Alamos National Laboratory (Linac); Brookhaven National Laboratory (Storage Ring); Argonne National Laboratory (Instruments); and Oak Ridge National Laboratory (Neutron Source and Conventional Facilities). It is proposed to implement a fully integrated control system for all aspects of this complex. The system will be developed collaboratively, with some degree of local autonomy for distributed systems, but centralized accountability. Technical integration will be based upon the widely-used EPICS control system toolkit, and a complete set of hardware and software standards. The scope of the integrated control system includes site-wide timing and synchronization, networking and machine protection. This paper discusses the technical and organizational issues of planning a large control system to be developed collaboratively at five different institutions, the approaches being taken to address those issues, as well as some of the particular technical challenges for the SNS control system

  19. The Intelligent Technologies of Electronic Information System

    Science.gov (United States)

    Li, Xianyu

    2017-08-01

    Based upon the synopsis of system intelligence and information services, this paper puts forward the attributes and the logic structure of information service, sets forth intelligent technology framework of electronic information system, and presents a series of measures, such as optimizing business information flow, advancing data decision capability, improving information fusion precision, strengthening deep learning application and enhancing prognostic and health management, and demonstrates system operation effectiveness. This will benefit the enhancement of system intelligence.

  20. Virtual Campus Hub: A single sign-on system for cross-border collaboration

    DEFF Research Database (Denmark)

    Badger, Merete; Vercoulen, F.; Monaco, L.

    2013-01-01

    laboratory exercises, examination tools, courses, collaboration tools, and tools to support the incubation of new small or medium size enterprises (SMEs). All of the applications serve as use cases for the demonstration of how the technology behind Virtual Campus Hub works. They can be accessed via...... in connection with joint educational programs and courses. These experiences are gained through a series of virtual events where users from the partners are invited to test each other’s applications. So far, testing of remote laboratory exercises, examination tools and an online course in wind energy has shown......Four technical universities in Europe work together in the EU-funded project Virtual Campus Hub (FP7 RI-283746, www.virtualcampushub.eu) to lower the technical barriers for cross-border collaboration. Universities have many connections to the outside world (e.g. to other universities, to joint...