WorldWideScience

Sample records for technology building supervision

  1. Using new technology of web and building science and technology plan projects supervision business information system%应用Web新技术构建科技计划项目监理业务信息系统综述

    Institute of Scientific and Technical Information of China (English)

    黄春荣

    2014-01-01

    科技计划项目监理是监控项目实施的必要手段,也是绩效评价的信息基础,近年来其重要性日益得到了科技管理部门和广大科技工作者的广泛共识。因此,应用Web新技术构建一个在线的广西科技计划项目监理业务信息系统平台,这对于创新原有科技项目管理工作流程十分重要。文章就国内外科技计划项目监理及信息系统的建设与监理业务的发展现状,及其构建广西科技计划项目监理业务信息系统平台的研究进展展开讨论,分析应用中所出现的一些问题,探讨解决问题的思路和方法。%Science and technology planning projects supervision is the essential means to monitor project implementation, and is information base of performance evaluation, in recent years, its importance get broad consensus of science and technology workers and administrative department of science and technology. So, it is very important for the original innovation of science and technology project management process to build a on-line Guangxi science and technology plan projects supervising business information system platform. In this paper, the construction of science and technology planning projects supervision and information system at home and abroad and present situation of supervising business development, and the research progress about the construction of Guangxi science and technology plan projects supervision business information system platform were discussed, some problems occurred in the application ere analysed occurred in the application, the ideas and methods to solve the problem were discussed.

  2. Educational Technology and Distance Supervision in Counselor Education

    Science.gov (United States)

    Carlisle, Robert Milton; Hays, Danica G.; Pribesh, Shana L.; Wood, Chris T.

    2017-01-01

    The authors used a nonexperimental descriptive design to examine the prevalence of distance supervision in counselor education programs, educational technology used in supervision, training on technology in supervision, and participants' (N = 673) perceptions of legal and ethical compliance. Program policies are recommended to guide the training…

  3. Supervision over technological and measurement processes

    Directory of Open Access Journals (Sweden)

    T. Karkoszka

    2011-01-01

    Full Text Available Purpose: of the paper has been an attainment of the thesis: “If there is something we can define, we can measure it. If there is something we can measure, we can analyse that. If there is something we can analyse, we can supervise that. If there is something we can supervise, we can improve that [1]”.Design/methodology/approach: used for the analysis has covered proposition of the supervision over measurement processes system that can be applied in quality assurance.Findings: of analysis are as follows: system of supervision over measurement processes performed (in compliance with real, realised in an organisation processes, can assure the achievement of the accurate and reliable results that, being the base of any feedback in any process, have fundamental meaning in making appropriate decisions.Practical implications: can be applied in case of any organisation, wanting to demonstrate the conformity of processes in the range of requirements that apply to: products, workers, natural environment and others by supervision over measurement equipment.Originality/value: of the presented paper has been obtained by working out the design of supervision over measurement system, also measurement system capability, which should be supplement for supervision over processes system in the assurance of processes and products quality.

  4. Enhance International Cooperation to Promote Technology Supervision

    Institute of Scientific and Technical Information of China (English)

    Li Helin; Terry Qin

    1995-01-01

    @@ Tubular Goods Research Center(TGRC) is not only a scientific research institution of CNPC, but also the Tubular goods Quality Supervising, Inspection and Testing Center, the OCTG Thread Gage Measurement and Certification Agency, the secretariat of Tubular Goods Technical Committee of China Petroleum Standardization Committee,the National Laboratory of OCTG Certification for China Administration of Import and Export Commodity Inspection, Oil field Tubular Goods and Equipment Subcenter of Failure Analysis and Prevention Center of China Science Association.

  5. Buildings for advanced technology

    CERN Document Server

    Teague, E; Murday, James

    2015-01-01

    This book deals with the design and construction of buildings for nanoscale science and engineering research. The information provided in this book is useful for designing and constructing buildings for such advanced technologies as nanotechnology, nanoelectronics and biotechnology. The book outlines the technology challenges unique to each of the building environmental challenges outlined below and provides best practices and examples of engineering approaches to address them: • Establishing and maintaining critical environments: temperature, humidity, and pressure • Structural vibration isolation • Airborne vibration isolation (acoustic noise) • Isolation of mechanical equipment-generated vibration/acoustic noise • Cost-effective power conditioning • Grounding facilities for low electrical interference • Electromagnetic interference (EMI)/Radio frequency interference (RFI) isolation • Airborne particulate contamination • Airborne organic and chemical contamination • Environment, safety a...

  6. Enhancing Practicum Supervision with Asynchronous and Synchronous Technologies

    Science.gov (United States)

    Teo, Yiong Hwee; McNamara, Sue; Romeo, Geoff; Gronn, Donna

    2015-01-01

    Three video/web conferencing technologies (Pocket Camcorder, Skype, Adobe Connect) were used in regional schools in Australia to determine whether the technologies are appropriate for the needs of the university supervisor, trainee teachers and supervising teachers with regard to practicum teaching placements. Findings revealed that Pocket…

  7. Technology-Mediated Supervision of Undergraduate Students' Dissertations

    Science.gov (United States)

    Jaldemark, Jimmy; Lindberg, J. Ola

    2013-01-01

    In Sweden, technology-mediated participation has increased in tertiary education, which has led to changing conditions for its delivery. However, one part has proven more resistant to change, technology-mediated or not: the supervision of students' undergraduate dissertation work. This article presents a study that analyses technological…

  8. Clinical supervision using video-conferencing technology: a reflective account.

    Science.gov (United States)

    Marrow, Carol E; Hollyoake, Kim; Hamer, Dorothy; Kenrick, Catherine

    2002-09-01

    This paper discusses three nursing practitioners' experiences of clinical supervision using video-conferencing (VC) technology. The study, based on supportive action research, involved 40 practising community and hospital nurses from a variety of specialties and took place over an 18-month period. The research was collaborative, educational and applied and focused on the effects of remote clinical supervision on the development of professional practice. Data were obtained through pre- and post-study questionnaires, repertory grids, focus group interviews and written narratives. The three research participants found that clinical supervision, as a mediator of learning, was vital in enabling them to develop their reflective and problem-solving skills. Through critical conversations with either a supervisor or within peer group supervision, the participants increased both their confidence and self-awareness and gained more insight into the practices and needs of other practitioners. They also examined critically patient care issues resulting in attention to existing or the development of new care protocols. They did, however, experience some impediments to the process of clinical supervision, mainly lack of peer and management support and ongoing education. The participants had mixed perceptions with regards to using VC technology for clinical supervision. They experienced technical and accessibility problems and communication problems, suggesting the need for clear protocols for both technical support and applied training.

  9. A National Survey of School Counselor Supervision Practices: Administrative, Clinical, Peer, and Technology Mediated Supervision

    Science.gov (United States)

    Perera-Diltz, Dilani M.; Mason, Kimberly L.

    2012-01-01

    Supervision is vital for personal and professional development of counselors. Practicing school counselors (n = 1557) across the nation were surveyed to explore current supervision practices. Results indicated that 41.1% of school counselors provide supervision. Although 89% receive some type of supervision, only 10.3% of school counselors receive…

  10. [Supervised administration of Alzheimer's patients using information communication technology].

    Science.gov (United States)

    Noda, Yasuha; Sakata, Yoshifumi; Kubota, Masakazu; Uemura, Kengo; Kihara, Takeshi; Kimura, Toru; Ino, Masashi; Tsuji, Teruyuki; Hayashi, Michiyuki; Kinoshita, Ayae

    2014-12-01

    Drug adherence is central to the treatment of dementia, which might reduce compliance due to memory loss, particularly among home-based patients with dementia. In order to improve drug adherence, we suggest the efficient and effective supervised administration by use of information communication technology(ICT). ICT makes face-to-face real-time communication possible, and it also enables picture sharing. Therefore, it might be useful to apply ICT to controlling and supervising medication for patients with dementia to improve drug adherence. Accordingly, we enrolled patients who were supposed to take a newly prescribed anti-dementia patch containing the choline esterase inhibitor rivastigmine(Rivastach®)and investigated the effect of ICT-based intervention for drug adherence, emotional change, and cognitive change, utilizing Skype, a free communication software program. Scheduled Skype interventions increased drug adherence ratio, levels of subjective satisfaction, and instrumental activities of daily living(IADL). Furthermore, we can provide patients and their caregivers with a feeling of safety through regular bidirectional communication, as patients can easily consult medical staff regarding the adverse effects of newly prescribed drugs. Instead of frequent visits to their primary physicians, ICT-based communications can be used as a substitute for supervision of medication, given the availability of the telecommunication system. By directly connecting the medical institution to the home, we expect that this ICT-based system will expand into the geriatric care field, including the care of elderly individuals living alone.

  11. Real-time supervision of building HVAC system performance

    Energy Technology Data Exchange (ETDEWEB)

    Djuric, Natasa

    2008-07-01

    This thesis presents techniques for improving building HVAC system performance in existing buildings generated using simulation-based tools and real data. Therefore, one of the aims has been to research the needs and possibilities to assess and improve building HVAC system performance. In addition, this thesis aims at an advanced utilization of building energy management system (BEMS) and the provision of useful information to building operators using simulation tools. Buildings are becoming more complex systems with many elements, while BEMS provide many data about the building systems. There are, however, many faults and issues in building performance, but there are legislative and cost-benefit forces induced by energy savings. Therefore, both BEMS and the computer-based tools have to be utilized more efficiently to improve building performance. The thesis consists of four main parts that can be read separately. The first part explains the term commissioning and the commissioning tool work principal based on literature reviews. The second part presents practical experiences and issues introduced through the work on this study. The third part deals with the computer-based tools application in design and operation. This part is divided into two chapters. The first deals with improvement in the design, and the second deals with the improvement in the control strategies. The last part of the thesis gives several rules for fault diagnosis developed using simulation tools. In addition, this part aims at the practical explanation of the faults in the building HVAC systems. The practical background for the thesis was obtained though two surveys. The first survey was carried out with the aim to find the commissioning targets in Norwegian building facilities. In that way, an overview of the most typical buildings, HVAC equipment, and their related problems was obtained. An on-site survey was carried out on an example building, which was beneficial for introducing the

  12. Real-time supervision of building HVAC system performance

    Energy Technology Data Exchange (ETDEWEB)

    Djuric, Natasa

    2008-07-01

    This thesis presents techniques for improving building HVAC system performance in existing buildings generated using simulation-based tools and real data. Therefore, one of the aims has been to research the needs and possibilities to assess and improve building HVAC system performance. In addition, this thesis aims at an advanced utilization of building energy management system (BEMS) and the provision of useful information to building operators using simulation tools. Buildings are becoming more complex systems with many elements, while BEMS provide many data about the building systems. There are, however, many faults and issues in building performance, but there are legislative and cost-benefit forces induced by energy savings. Therefore, both BEMS and the computer-based tools have to be utilized more efficiently to improve building performance. The thesis consists of four main parts that can be read separately. The first part explains the term commissioning and the commissioning tool work principal based on literature reviews. The second part presents practical experiences and issues introduced through the work on this study. The third part deals with the computer-based tools application in design and operation. This part is divided into two chapters. The first deals with improvement in the design, and the second deals with the improvement in the control strategies. The last part of the thesis gives several rules for fault diagnosis developed using simulation tools. In addition, this part aims at the practical explanation of the faults in the building HVAC systems. The practical background for the thesis was obtained though two surveys. The first survey was carried out with the aim to find the commissioning targets in Norwegian building facilities. In that way, an overview of the most typical buildings, HVAC equipment, and their related problems was obtained. An on-site survey was carried out on an example building, which was beneficial for introducing the

  13. Teachers' and Students' Perception of Instructional Supervision on Capacity Building in Electrical Installation Trade

    Science.gov (United States)

    Eze, Ogwa Christopher

    2015-01-01

    This research was conducted to ascertain teachers' and students perception of instructional supervision in relation to capacity building in electrical installation trade in technical colleges. Three research questions and a null hypothesis were employed to guide the study. Descriptive survey was adopted. A 23-item questionnaire was used to elicit…

  14. Automatic Building Detection based on Supervised Classification using High Resolution Google Earth Images

    OpenAIRE

    Ghaffarian, S.

    2014-01-01

    This paper presents a novel approach to detect the buildings by automization of the training area collecting stage for supervised classification. The method based on the fact that a 3d building structure should cast a shadow under suitable imaging conditions. Therefore, the methodology begins with the detection and masking out the shadow areas using luminance component of the LAB color space, which indicates the lightness of the image, and a novel double thresholding technique. Furth...

  15. Build an Assistive Technology Toolkit

    Science.gov (United States)

    Ahrens, Kelly

    2011-01-01

    Assistive technology (AT) by its very nature consists of a variety of personal and customized tools for multiple learning styles and physical challenges. The author not only encourages students, parents, and educators to advocate for AT services, she also wants them to go a step further and build their own AT toolkits that can instill independence…

  16. Recovery technologies for building materials

    Science.gov (United States)

    Karu, Veiko; Nurme, Martin; Valgma, Ingo

    2015-04-01

    Mining industry provides building materials for construction. Civil engineers have settled the quality parameters for construction materials. When we produce high quality building materials from carbonate rock (limestone, dolostone), then the estimated waste share is 25% to 30%, depending on crushing principles and rock quality. The challenge is to find suitable technology for waste recovery. During international mining waste related cooperation project MIN-NOVATION (www.min-novation.eu), partners mapped possibilities for waste recovery in mining industry and pointed out good examples and case studies. One example from Estonia showed that when we produce limestone aggregate, then we produce up to 30% waste material (fines with size 0-4mm). This waste material we can see as secondary raw material for building materials. Recovery technology for this fine grained material has been achieved with CDE separation plant. During the process the plant washes out minus 63 micron material from the limestone fines. This technology allows us to use 92% of all limestone reserves. By-product from 63 microns to 4 mm we can use as filler in concrete or as fine limestone aggregate for building or building materials. MIN-NOVATION project partners also established four pilot stations to study other mineral waste recovery technologies and solutions. Main aims on this research are to find the technology for recovery of mineral wastes and usage for new by-products from mineral mining waste. Before industrial production, testing period or case studies are needed. This research is part of the study of Sustainable and environmentally acceptable Oil shale mining No. 3.2.0501.11-0025 http://mi.ttu.ee/etp and the project B36 Extraction and processing of rock with selective methods - http://mi.ttu.ee/separation; http://mi.ttu.ee/miningwaste/

  17. Automatic Building Detection based on Supervised Classification using High Resolution Google Earth Images

    Science.gov (United States)

    Ghaffarian, S.; Ghaffarian, S.

    2014-08-01

    This paper presents a novel approach to detect the buildings by automization of the training area collecting stage for supervised classification. The method based on the fact that a 3d building structure should cast a shadow under suitable imaging conditions. Therefore, the methodology begins with the detection and masking out the shadow areas using luminance component of the LAB color space, which indicates the lightness of the image, and a novel double thresholding technique. Further, the training areas for supervised classification are selected by automatically determining a buffer zone on each building whose shadow is detected by using the shadow shape and the sun illumination direction. Thereafter, by calculating the statistic values of each buffer zone which is collected from the building areas the Improved Parallelepiped Supervised Classification is executed to detect the buildings. Standard deviation thresholding applied to the Parallelepiped classification method to improve its accuracy. Finally, simple morphological operations conducted for releasing the noises and increasing the accuracy of the results. The experiments were performed on set of high resolution Google Earth images. The performance of the proposed approach was assessed by comparing the results of the proposed approach with the reference data by using well-known quality measurements (Precision, Recall and F1-score) to evaluate the pixel-based and object-based performances of the proposed approach. Evaluation of the results illustrates that buildings detected from dense and suburban districts with divers characteristics and color combinations using our proposed method have 88.4 % and 853 % overall pixel-based and object-based precision performances, respectively.

  18. African Journal of Science and Technology (AJST) SUPERVISED ...

    African Journals Online (AJOL)

    NORBERT OPIYO AKECH

    ABSTRACT: TThis paper proposes a new method for supervised color image classification by the ... learning quantisation vector (LVQ), is constructed and compared to the K-means clustering ..... colored scanned maps, Machine Vision and.

  19. Identification of Village Building via Google Earth Images and Supervised Machine Learning Methods

    Directory of Open Access Journals (Sweden)

    Zhiling Guo

    2016-03-01

    Full Text Available In this study, a method based on supervised machine learning is proposed to identify village buildings from open high-resolution remote sensing images. We select Google Earth (GE RGB images to perform the classification in order to examine its suitability for village mapping, and investigate the feasibility of using machine learning methods to provide automatic classification in such fields. By analyzing the characteristics of GE images, we design different features on the basis of two kinds of supervised machine learning methods for classification: adaptive boosting (AdaBoost and convolutional neural networks (CNN. To recognize village buildings via their color and texture information, the RGB color features and a large number of Haar-like features in a local window are utilized in the AdaBoost method; with multilayer trained networks based on gradient descent algorithms and back propagation, CNN perform the identification by mining deeper information from buildings and their neighborhood. Experimental results from the testing area at Savannakhet province in Laos show that our proposed AdaBoost method achieves an overall accuracy of 96.22% and the CNN method is also competitive with an overall accuracy of 96.30%.

  20. Building Technologies Research and Integration Center (BTRIC)

    Data.gov (United States)

    Federal Laboratory Consortium — The Building Technologies Research and Integration Center (BTRIC), in the Energy and Transportation Science Division (ETSD) of Oak Ridge National Laboratory (ORNL),...

  1. A Saliency Guided Semi-Supervised Building Change Detection Method for High Resolution Remote Sensing Images

    Directory of Open Access Journals (Sweden)

    Bin Hou

    2016-08-01

    Full Text Available Characterizations of up to date information of the Earth’s surface are an important application providing insights to urban planning, resources monitoring and environmental studies. A large number of change detection (CD methods have been developed to solve them by utilizing remote sensing (RS images. The advent of high resolution (HR remote sensing images further provides challenges to traditional CD methods and opportunities to object-based CD methods. While several kinds of geospatial objects are recognized, this manuscript mainly focuses on buildings. Specifically, we propose a novel automatic approach combining pixel-based strategies with object-based ones for detecting building changes with HR remote sensing images. A multiresolution contextual morphological transformation called extended morphological attribute profiles (EMAPs allows the extraction of geometrical features related to the structures within the scene at different scales. Pixel-based post-classification is executed on EMAPs using hierarchical fuzzy clustering. Subsequently, the hierarchical fuzzy frequency vector histograms are formed based on the image-objects acquired by simple linear iterative clustering (SLIC segmentation. Then, saliency and morphological building index (MBI extracted on difference images are used to generate a pseudo training set. Ultimately, object-based semi-supervised classification is implemented on this training set by applying random forest (RF. Most of the important changes are detected by the proposed method in our experiments. This study was checked for effectiveness using visual evaluation and numerical evaluation.

  2. A Saliency Guided Semi-Supervised Building Change Detection Method for High Resolution Remote Sensing Images.

    Science.gov (United States)

    Hou, Bin; Wang, Yunhong; Liu, Qingjie

    2016-08-27

    Characterizations of up to date information of the Earth's surface are an important application providing insights to urban planning, resources monitoring and environmental studies. A large number of change detection (CD) methods have been developed to solve them by utilizing remote sensing (RS) images. The advent of high resolution (HR) remote sensing images further provides challenges to traditional CD methods and opportunities to object-based CD methods. While several kinds of geospatial objects are recognized, this manuscript mainly focuses on buildings. Specifically, we propose a novel automatic approach combining pixel-based strategies with object-based ones for detecting building changes with HR remote sensing images. A multiresolution contextual morphological transformation called extended morphological attribute profiles (EMAPs) allows the extraction of geometrical features related to the structures within the scene at different scales. Pixel-based post-classification is executed on EMAPs using hierarchical fuzzy clustering. Subsequently, the hierarchical fuzzy frequency vector histograms are formed based on the image-objects acquired by simple linear iterative clustering (SLIC) segmentation. Then, saliency and morphological building index (MBI) extracted on difference images are used to generate a pseudo training set. Ultimately, object-based semi-supervised classification is implemented on this training set by applying random forest (RF). Most of the important changes are detected by the proposed method in our experiments. This study was checked for effectiveness using visual evaluation and numerical evaluation.

  3. Building technologies program. 1995 annual report

    Energy Technology Data Exchange (ETDEWEB)

    Selkowitz, S.E.

    1996-05-01

    The 1995 annual report discusses laboratory activities in the Building Technology Program. The report is divided into four categories: windows and daylighting, lighting systems, building energy simulation, and advanced building systems. The objective of the Building Technologies program is to assist the U.S. building industry in achieving substantial reductions in building-sector energy use and associated greenhouse gas emissions while improving comfort, amenity, health, and productivity in the building sector. Past efforts have focused on windows and lighting, and on the simulation tools needed to integrate the full range of energy efficiency solutions into achievable, cost-effective design solutions for new and existing buildings. Current research is based on an integrated systems and life-cycle perspective to create cost-effective solutions for more energy-efficient, comfortable, and productive work and living environments. Sixteen subprograms are described in the report.

  4. Technology: Building Success through Teacher Empowerment.

    Science.gov (United States)

    Cooley, Van E.

    1997-01-01

    Empowered technology teams can help realize the financial investment of schools in technology. Teams foster communities of technology users and give teachers and staff opportunities for leadership. A transformational leadership style is essential to the building of a human infrastructure that will use the technological infrastructure. (KS)

  5. Building Technological Capability within Satellite Programs in Developing Countries

    Science.gov (United States)

    Wood, Danielle Renee

    capability building assessment shows that most trainee engineers gradually progressed from no experience with satellites through theoretical training to supervised experience; a minority achieved independent experience. At the organizational level, the emerging space organizations achieved high levels of autonomy in project definition and satellite operation, but they were dependent on foreign firms for satellite design, manufacture, test and launch. The case studies can be summarized by three archetypal projects defined as "Politically Pushed," "Structured," and "Risk Taking." Countries in the case studies tended to start in a Politically Pushed mode, and then moved into either Structured or Risk Taking mode. Decision makers in emerging satellite programs can use the results of this dissertation to consider the broad set of architectural options for capability building. Future work will continue to probe how specific architectural decisions impact capability building outcomes in satellite projects and other technologies. (Copies available exclusively from MIT Libraries, libraries.mit.edu/docs - docs@mit.edu)

  6. Towards a supervised rescoring system for unstructured data bases used to build specialized dictionaries

    Directory of Open Access Journals (Sweden)

    Antonio Rico-Sulayes

    2014-12-01

    Full Text Available This article proposes the architecture for a system that uses previously learned weights to sort query results from unstructured data bases when building specialized dictionaries. A common resource in the construction of dictionaries, unstructured data bases have been especially useful in providing information about lexical items frequencies and examples in use. However, when building specialized dictionaries, whose selection of lexical items does not rely on frequency, the use of these data bases gets restricted to a simple provider of examples. Even in this task, the information unstructured data bases provide may not be very useful when looking for specialized uses of lexical items with various meanings and very long lists of results. In the face of this problem, long lists of hits can be rescored based on a supervised learning model that relies on previously helpful results. The allocation of a vast set of high quality training data for this rescoring system is reported here. Finally, the architecture of sucha system,an unprecedented tool in specialized lexicography, is proposed.

  7. Supervising nursing students in a technology-driven medication administration process in a hospital setting

    DEFF Research Database (Denmark)

    Gaard, Mette; Orbæk, Janne

    2016-01-01

    REVIEW QUESTION/OBJECTIVE: The objective of this review is to identify, describe and synthesize the experiences of nurse supervisors and the factors that influence the supervision of pre-graduate nursing students in undertaking technology-driven medication administration in hospital settings...

  8. [Technology transfer of building materials by ECOMAT

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-01-01

    This report discusses the plan for technology transfer of building materials developed by ECOMAT to the commercial private sector. Some of the materials are briefly discussed like foams, fiber reinforcement, fly ash development, and polymer fillers.

  9. Building a Successful Technology Cluster

    Science.gov (United States)

    Silicon Valley is the iconic cluster—a dense regional network of companies, universities, research institutions, and other stakeholders involved in a single industry. Many regions have sought to replicate the success of Silicon Valley, which has produced technological innov...

  10. Technologies used for research in intelligent buildings

    Science.gov (United States)

    Kolková, Zuzana; Matušov, Jozef; Mokrý, Marián

    2016-06-01

    The efficient use of primary energy and their impact on the environment is influenced in several ways. The key is implementation of modern low-energy structures and technologies in building construction, the use of high energy sources such fossil fuels and renewable energy, the optimal management, appropriate choice of sources of heat and cold. Optimal control of energy consumption in buildings and premises may be an appropriate choice of sources of heat and cold. Energy sources should be in addition to high efficiency and meet the requirement of minimizing the emission load environment. All this can be achieved by implementing the construction of intelligent buildings. University of Žilina in the project Research Centre of the University of Žilina decided to build such building. Use of this building will be addressing many research activities at the university with links to industry.

  11. Building Blocks: Enmeshing Technology and Creativity with Artistic Pedagogical Technologies

    Science.gov (United States)

    Janzen, Katherine J.; Perry, Beth; Edwards, Margaret

    2017-01-01

    Using the analogy of children's building blocks, the reader is guided through the results of a research study that explored the use of three Artistic Pedagogical Technologies (APTs). "Building blocks" was the major theme that emerged from the data. Sub-themes included developing community, enhancing creativity, and risk taking. The…

  12. Technology evaluation report, commercial buildings

    Energy Technology Data Exchange (ETDEWEB)

    None,

    1976-04-01

    Criteria are presented which are to be met by solar hardware for inclusion in the demonstration program. Assessments are made, based on a survey made of solar hardware manufacturers and developers, of when components, subsystems, and systems will be available for demonstration according to the technology status categories set forth in ERDA 23A. Task outlines are provided for development activity recommended to improve available systems or develop advanced systems for later demonstration cycles. (WDM)

  13. SUPPORTIVE SUPERVISION AS A TECHNOLOGY OF IMPROVING THE QUALITY OF HOSPITAL CARE DELIVERY

    Directory of Open Access Journals (Sweden)

    Svetlana A. Mukhortova

    2017-01-01

    Full Text Available Improving the quality of medical care is a priority in countries with developed and developing health care system. There are various approaches to improve the quality and safety of patient’s care, as well as various strategies to encourage hospitals to achieve this goal. The purpose of the presented literature review was to analyze existing experience of the implementation of technology of supportive supervision in health care facilities to improve the quality of hospital care delivery. The data sources for publication were obtained from the following medical databases: PubMed, Cochrane Library, Medscape, e-library, and books on the topic of the review written by experts. The article discusses the results of the research studies demonstrating the successes and failures of supportive supervision technology application. Implementation of supportive supervision in medical facilities based on generalized experience of different countries is a promising direction in improving the quality of medical care delivery. This technology opens up opportunities to improve skills and work quality of the staff at pediatric hospitals in the Russian Federation.

  14. Building Design Guidelines for Solar Energy Technologies

    Science.gov (United States)

    Givoni, B.

    1989-01-01

    There are two main objectives to this publication. The first is to find out the communalities in the experience gained in previous studies and in actual applications of solar technologies in buildings, residential as well as nonresidential. The second objective is to review innovative concepts and products which may have an impact on future developments and applications of solar technologies in buildings. The available information and common lessons were collated and presented in a form which, hopefully, is useful for architects and solar engineers, as well as for teachers of "solar architecture" and students in Architectural Schools. The publication is based mainly on the collection and analysis of relevant information. The information included previous studies in which the performance of solar buildings was evaluated, as well as the personal experience of the Author and the research consultants. The state of the art, as indicated by these studies and personal experience, was summarized and has served as basis for the development of the Design Guidelines. In addition to the summary of the state of the art, as was already applied in solar buildings, an account was given of innovative concepts and products. Such innovations have occurred in the areas of thermal storage by Phase Change Materials (PCM) and in glazing with specialized or changeable properties. Interesting concepts were also developed for light transfer, which may enable to transfer sunlight to the core areas of large multi story nonresidential buildings. These innovations may have a significant impact on future developments of solar technologies and their applications in buildings.

  15. Continuous Enhance the Build of Supervision and Management Team Effort to Improve the Supervision Level%不断加强监管队伍建设努力提升监督工作水平

    Institute of Scientific and Technical Information of China (English)

    钮正喜

    2014-01-01

    Enhancing the supervision team build,effort to improve the level and effective of supervision work,so as to improve the level of engineering quality and safety,should be solved quickly which is the supervision system faced important problem.%进一步加强监管队伍建设,努力提高监督工作水平和效率,从而提高建设工程的质量和安全水平,从金山区安全监督站的角度进行分析与总结。

  16. Evaluation of the technology roadmap for intelligent building technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-03-01

    A Technology Roadmap (TRM) is a process tool developed to help Canadian industries identify and address the technology challenges in the future. This report presented the findings from an evaluation of the Technology Roadmap for Intelligent Building Technologies (IBT TRM) that began in 1999 and was released in 2002. The IBT TRM was a collaborative research project between industry and 5 Canadian federal government organizations. The project was managed by the Continental Automated Buildings Association (CABA). The purpose of the TRM was to clarify the challenges and opportunities in the general area of intelligent building technologies. The lack of understanding of IBTs by the construction industry was identified by participants as a significant national issue because it was the major obstacle to the adoption of emerging technologies. New initiatives launched by the IBT TRM as a consequence of the evaluation include the creation of the Intelligent and Integrated Buildings Council (IIBC) sub-committee of CABA to act on the recommendations of the TRM; and planning by CABA for a new TRM to focus on residential rather than commercial buildings. It was also noted that a valuable network of contracts was created during the evaluation process. Various promotional initiatives were reviewed. It was concluded that Industry Canada should continue to play a continued role in the TRM, particularly in the area of fostering and facilitating the development of regulations and standards; further leveraging the expertise of federal research facilities; encouraging international trade efforts; and exploring the applications of intelligent building technologies to other industries. It was suggested that TRMs support the sector's strategic objectives related to the development, adaptation, diffusion and use of sustainable technologies.

  17. Building design guidelines for solar energy technologies

    Energy Technology Data Exchange (ETDEWEB)

    Givoni, B.

    1989-01-01

    There are two main objectives to this publication. The first is to find out the communalities in the experience gained in previous studies and in actual applications of solar technologies in buildings, residential as well as nonresidential. The second objective is to review innovative concepts and products which may have an impact on future developments and applications of solar technologies in buildings. The available information and common lessons were collated and presented in a form which, hopefully, is useful for architects and solar engineers, as well as for teachers of solar architecture'' and students in Architectural Schools. The publication is based mainly on the collection and analysis of relevant information. The information included previous studies in which the performance of solar buildings was evaluated, as well as the personal experience of the Author and the research consultants. The state of the art, as indicated by these studies and personal experience, was summarized and has served as basis for the development of the Design Guidelines. In addition to the summary of the state of the art, as was already applied in solar buildings, an account was given of innovative concepts and products. Such innovations have occurred in the areas of thermal storage by Phase Change Materials (PCM) and in glazing with specialized or changeable properties. Interesting concepts were also developed for light transfer, which may enable to transfer sunlight to the core areas of large multi story nonresidential buildings. These innovations may have a significant impact on future developments of solar technologies and their applications in buildings. 15 refs., 19 figs., 3 tabs.

  18. Effective evaluation of green building technologies

    Energy Technology Data Exchange (ETDEWEB)

    Sawers, J. [Reid Crowther and Partners Ltd., Calgary, AB (Canada)

    1998-12-01

    A proposed green building technology evaluation model is described. The model was developed as result of the inability of traditional evaluation techniques such as pay-back period, net present value and life cycle cost, to deal effectively with the intangible benefits of green technologies. Unlike traditional tools which are primarily financial in nature, the proposed model is based on a model developed in the Information Technology (IT) industry. It extends the concept of `benefit` to include a wide range of factors that affect a system`s business value. It also extends the concept of `cost` to include an evaluation of risk. The model considers nine criteria divided into two groups: business criteria and technology criteria. Business criteria encompass economic impact, strategic alignment, competitive advantage, improved management information, competitive risk, and organizational risk. The technological criteria comprise strategic architecture, definition uncertainty, and infrastructure risk. Assignment of weights to each of these criteria is somewhat subjective, but subjectivity can be overcome by the consistent use of good judgment. The green building technologies model draws on both the IT model and the value management concept (i.e. `value to a client within a particular context`). The model provides for the use of a value hierarchy to establish and weigh decision criteria; it expands the definition of project `costs` and `benefits`, and provides a decision matrix and sensitivity analysis. 6 refs., 4 figs.

  19. Buildings R&D Breakthroughs. Technologies and Products Supported by the Building Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2012-04-01

    This report identifies and characterizes commercially available products and emerging (near-commercial) technologies that benefited from the support of the Building Technologies Program (BTP) within the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy. The investigation specifically focused on technology-oriented research and development (R&D) projects sponsored by BTP’s Emerging Technologies subprogram from 2005-2009.

  20. Buildings R&D Breakthroughs: Technologies and Products Supported by the Building Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    Weakley, Steven A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2012-04-01

    The purpose of the project described in this report is to identify and characterize commercially available products and emerging (near-commercial) technologies that benefited from the support of the Building Technologies Program (BTP) within the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy. The investigation specifically focused on technology-oriented research and development (R&D) projects funded by BTP’s Emerging Technologies subprogram from 2005-2011.

  1. Buildings R&D Breakthroughs: Technologies and Products Supported by the Building Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    Weakley, Steven A.

    2012-04-15

    The purpose of the project described in this report is to identify and characterize commercially available products and emerging (near-commercial) technologies that benefited from the support of the Building Technologies Program (BTP) within the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy. The investigation specifically focused on technology-oriented research and development (R&D) projects funded by BTP’s Emerging Technologies subprogram from 2005-2011.

  2. Discussion on the Engineering of Green Energy-Saving Building Quality Supervision%绿色节能建筑工程质量监督的探讨

    Institute of Scientific and Technical Information of China (English)

    侯博瀚

    2014-01-01

    近年来,随着我国国民经济水平的提高,绿色建筑作为新兴快速发展的产业链被社会愈加重视,节能工程的质量问题也越来越成为关注的焦点。为做好质量监督工作,要认真地了解各责任主体的质量行为,施工工艺,只有探讨了解相关的知识才能在平常的监督管理工作中做到游刃有余、保质保量。%In recent years,along with our country national economy level,green building is emerging as the rapid development of industry chain is the society more and more attention,the quality problem of energy-saving project has increasingly become the focus of attention. To do a good job in quality supervision, quality behavior to understand the responsibility main body,construction technology,only to understand the relevant knowledge can be in daily supervision and management work to do a job with skill and ease,guarantee the quantity.

  3. Supervision--growing and building a sustainable general practice supervisor system.

    Science.gov (United States)

    Thomson, Jennifer S; Anderson, Katrina J; Mara, Paul R; Stevenson, Alexander D

    2011-06-06

    This article explores various models and ideas for future sustainable general practice vocational training supervision in Australia. The general practitioner supervisor in the clinical practice setting is currently central to training the future general practice workforce. Finding ways to recruit, retain and motivate both new and experienced GP teachers is discussed, as is the creation of career paths for such teachers. Some of the newer methods of practice-based teaching are considered for further development, including vertically integrated teaching, e-learning, wave consulting and teaching on the run, teaching teams and remote teaching. Approaches to supporting and resourcing teaching and the required infrastructure are also considered. Further research into sustaining the practice-based general practice supervision model will be required.

  4. BUILDING BLOCKS: ENMESHING TECHNOLOGY AND CREATIVITY WITH ARTISTIC PEDAGOGICAL TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Katherine J.JANZEN

    2017-01-01

    Full Text Available Using the analogy of children’s building blocks, the reader is guided through the results of a research study that explored the use of three Artistic Pedagogical Technologies (APTs. ‘Building blocks’ was the major theme that emerged from the data. Sub-themes included developing community, enhancing creativity, and risk taking. The discourse of the paper centers on how selected APTs stimulate interaction, create social presence, and help develop community in the online post-secondary classroom. Additional findings are discussed and implications are presented.

  5. Identification of critical technology building blocks

    DEFF Research Database (Denmark)

    Ravn, Poul Martin; Mortensen, Niels Henrik; Hvam, Lars

    2017-01-01

    In order to have a better base for decisions, R&D managers need to know what the critical areas of development are in relation to the technologies they develop, mature, and include in the portfolio. As most of the technologies in a company have the potential to have a significant impact on compet......In order to have a better base for decisions, R&D managers need to know what the critical areas of development are in relation to the technologies they develop, mature, and include in the portfolio. As most of the technologies in a company have the potential to have a significant impact...... on competition, the challenge is to know how to identify and prioritize the development tasks. If possible, an effective strategy can be defined. This article suggests a framework for identification and analysis of a product portfolio, with special emphasis on identifying critical technology building blocks...... based on reasoning about product properties. Current approaches lack such views, and by focusing on these, potential make or break decisions are better supported. It is suggested to adopt the proposed framework to clarify where in the portfolio the technology needs critical attention for the next...

  6. Development of Web-based technology on supervision information system of science and technology program%基于Web开发新技术的科技计划项目监理业务信息系统研发

    Institute of Scientific and Technical Information of China (English)

    黄春荣; 黄俊明; 符娟

    2014-01-01

    科技项目监管是政府科技计划项目管理的核心。高效合理的科技项目监理能保障科技项目经费的合理使用。集成应用云计算技术和Web开发新技术,采取PHP+ORACLE+JAVASCRIP+AJAX语言编写,按照MVC(Model View Controller)模型(model)-视图(view)-控制器(controller)的架构搭建了科技计划项目监理业务信息系统平台,实现了对科技计划项目进行高效便捷的监管。%Science and technology project is the core business of government science and technology program. Efficient and rational supervision is the garantee to the rational utilization of project fund .In order to perform an efficient and convenient supervision of science and technology project, the cloud computing and Web-based development are integrated into the building of MVC(Model View Controller) framework of the science and technology project supervision information system platform which is programmed by means of PHP+ORACLE+JAVASCRIP+AJAX languages.

  7. Building Technologies Program Multi-Year Program Plan Technology Validation and Market Introduction 2008

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2008-01-01

    Building Technologies Program Multi-Year Program Plan 2008 for technology validation and market introduction, including ENERGY STAR, building energy codes, technology transfer application centers, commercial lighting initiative, EnergySmart Schools, EnergySmar

  8. Sustainable technologies for the building construction industry

    Energy Technology Data Exchange (ETDEWEB)

    Vanegas, J.A.; DuBose, J.R.; Pearce, A.R. [Georgia Institute of Technology, Atlanta, GA (United States)

    1995-12-31

    As the dawn of the twenty-first century approaches, the current pattern of unsustainable, inequitable and unstable asymmetric demographic and economic growth has forced many segments of society to come together in facing a critical challenge: how can societies across the world meet their current basic human needs, aspirations and desires, without compromising the ability of future generations to meet their own needs? At the core of this challenge is the question: how can the human race maintain in perpetuity a healthy, physically attractive and biologically productive environment. The development path that we have been taking, in the past few centuries, has been ultimately detrimental to the health of our surrounding ecological context. We are consuming an increasing share of the natural resources available to use on this planet, and we are creating sufficiently large amounts of waste and pollution such that the earth can no longer assimilate our wastes and recover from the negative impacts. This is a result of a growing population as well as new technologies which make it easier for use to access natural resources and also require the consumption of more resources. Unsustainable technology has been the result of linear rather than cyclic thinking. The paradigm shift from linear to cyclic thinking in technological design is the crux of the shift from unsustainability to sustainability. This paper discusses the implications for the building design and construction industries. Strategies, technologies, and opportunities are presented to improve the sustainability of the built environment.

  9. The Application of Intelligent Building Technologies to Space Hotels

    Science.gov (United States)

    Fawkes, S.

    This paper reports that over the last few years Intelligent Building technologies have matured and standardised. It compares the functions of command and control systems in future large space facilities such as space hotels to those commonly found in Intelligent Buildings and looks at how Intelligent Building technologies may be applied to space hotels. Many of the functions required in space hotels are the same as those needed in terrestrial buildings. The adaptation of standardised, low cost, Intelligent Building technologies would reduce capital costs and ease development of future space hotels. Other aspects of Intelligent Buildings may also provide useful models for the development and operation of space hotels.

  10. Building information modeling based on intelligent parametric technology

    Institute of Scientific and Technical Information of China (English)

    ZENG Xudong; TAN Jie

    2007-01-01

    In order to push the information organization process of the building industry,promote sustainable architectural design and enhance the competitiveness of China's building industry,the author studies building information modeling (BIM) based on intelligent parametric modeling technology.Building information modeling is a new technology in the field of computer aided architectural design,which contains not only geometric data,but also the great amount of engineering data throughout the lifecycle of a building.The author also compares BIM technology with two-dimensional CAD technology,and demonstrates the advantages and characteristics of intelligent parametric modeling technology.Building information modeling,which is based on intelligent parametric modeling technology,will certainly replace traditional computer aided architectural design and become the new driving force to push forward China's building industry in this information age.

  11. Advanced information technology: Building stronger databases

    Energy Technology Data Exchange (ETDEWEB)

    Price, D. [Lawrence Livermore National Lab., CA (United States)

    1994-12-01

    This paper discusses the attributes of the Advanced Information Technology (AIT) tool set, a database application builder designed at the Lawrence Livermore National Laboratory. AIT consists of a C library and several utilities that provide referential integrity across a database, interactive menu and field level help, and a code generator for building tightly controlled data entry support. AIT also provides for dynamic menu trees, report generation support, and creation of user groups. Composition of the library and utilities is discussed, along with relative strengths and weaknesses. In addition, an instantiation of the AIT tool set is presented using a specific application. Conclusions about the future and value of the tool set are then drawn based on the use of the tool set with that specific application.

  12. 2013 Building Technologies Office Program Peer Review Report

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-11-01

    The 2013 Building Technologies Office Program Peer Review Report summarizes the results of the 2013 Building Technologies Office (BTO) peer review, which was held in Washington, D.C., on April 2–4, 2013. The review was attended by over 300 participants and included presentations on 59 BTO-funded projects: 29 from BTO’s Emerging Technologies Program, 20 from the Commercial Buildings Integration Program, 6 from the Residential Buildings Integration Program, and 4 from the Building Energy Codes Program. This report summarizes the scores and comments provided by the independent reviewers for each project.

  13. Tuning, Diagnostics & Data Preparation for Generalized Linear Models Supervised Algorithm in Data Mining Technologies

    Directory of Open Access Journals (Sweden)

    Sachin Bhaskar

    2015-07-01

    Full Text Available Data mining techniques are the result of a long process of research and product development. Large amount of data are searched by the practice of Data Mining to find out the trends and patterns that go beyond simple analysis. For segmentation of data and also to evaluate the possibility of future events, complex mathematical algorithms are used here. Specific algorithm produces each Data Mining model. More than one algorithms are used to solve in best way by some Data Mining problems. Data Mining technologies can be used through Oracle. Generalized Linear Models (GLM Algorithm is used in Regression and Classification Oracle Data Mining functions. For linear modelling, GLM is one the popular statistical techniques. For regression and binary classification, GLM is implemented by Oracle Data Mining. Row diagnostics as well as model statistics and extensive co-efficient statistics are provided by GLM. It also supports confidence bounds.. This paper outlines and produces analysis of GLM algorithm, which will guide to understand the tuning, diagnostics & data preparation process and the importance of Regression & Classification supervised Oracle Data Mining functions and it is utilized in marketing, time series prediction, financial forecasting, overall business planning, trend analysis, environmental modelling, biomedical and drug response modelling, etc.

  14. Future Directions for Building Services Technologies in Denmark

    DEFF Research Database (Denmark)

    Marsh, Rob

    2008-01-01

      The hypothesis of this paper is that industrial transformation in the Danish construction sector needs in the future to focus on integrating building services technologies into the buildings. This can be illustrated by analysing historical developments in building services usage, exploring desi...

  15. Improving education and supervision of Queensland X-ray Operators through video conference technology: A teleradiography pilot project.

    Science.gov (United States)

    Rawle, Marnie; Oliver, Tanya; Pighills, Alison; Lindsay, Daniel

    2017-04-13

    X-ray Operator (XO) supervision in Queensland is performed by radiographers in a site removed from the XO site. This has historically been performed by telephone when the XO requires immediate help, as well as post-examination through radiographer review and the provision of written feedback on images produced. This project aimed to improve image quality through the provision of real-time support of XOs by the introduction of video conference (VC) supervision. A 6-month pilot project compared image quality with and without VC supervision. VC equipment was installed in the X-ray room at two rural sites, as well as at the radiographer site, to enable visual and oral supervision. The VC unit enabled visualisation of the X-ray examination technique as it was being undertaken, as well as the images produced prior to transmission to the Picture Archiving and Communication System (PACS). Statistically significant improvement in image quality criteria measures were seen for patient positioning (P = 0.008), image quality (P radiographer for assistance, although, assistance was actually provided in 88.3% of examinations. This project has demonstrated that significant improvement in image quality is achievable with VC supervision. A larger study with a control arm that did not receive direct supervision should be used to validate the findings of this study. © 2017 The Authors. Journal of Medical Radiation Sciences published by John Wiley & Sons Australia, Ltd on behalf of Australian Society of Medical Imaging and Radiation Therapy and New Zealand Institute of Medical Radiation Technology.

  16. Building Technologies Office FY 2017 Budget At-A-Glance

    Energy Technology Data Exchange (ETDEWEB)

    None

    2016-03-01

    Buildings and homes use more than 73% of the electrical energy consumed in the United States. They also consume 40% of the nation’s total energy, with an annual energy bill of $430 billion. These energy bills can be cost effectively reduced by 20%–50% or more through various energy-efficient technologies and techniques. The Building Technologies Office (BTO) will continue to develop and demonstrate advanced building efficiency technologies and practices to make buildings in the United States more efficient, affordable, and comfortable.

  17. Research and Development Needs for Building-Integrated Solar Technologies

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2014-01-01

    The Building Technologies Office (BTO) has identified Building Integrated Solar Technologies (BIST) as a potentially valuable piece of the comprehensive pathway to help achieve its goal of reducing energy consumption in residential and commercial buildings by 50% by the year 2030. This report helps to identify the key research and development (R&D) needs that will be required for BIST to make a substantial contribution toward that goal. BIST include technologies for space heating and cooling, water heating, hybrid photovoltaic-thermal systems (PV/T), active solar lighting, and building-integrated photovoltaics (BIPV).

  18. 建筑电气安装中的质量控制与监理%The Quality Control and Supervision of Building Electrical Installation

    Institute of Scientific and Technical Information of China (English)

    冷静

    2013-01-01

      建筑电气安装工程作为建筑工程项目实施的一个重要环节,监理工作的好坏成了影响建筑电气安装质量的关键。做好建筑电气安装监理工作是建筑电气安装质量的重要保证,因此为了保证安装质量,看清并执行好质量控制与监理工作是十分重要。%The building electrical instal ation engineering as an important part of construction project implementation, and the good or bad of the supervision work will impact on the quality of the building electrical instal ation. Do a good job of building electrical instal ation supervision is an important gua-rantee for the quality. So in order to ensure the quality of the instal ation, it’s very important to see and perform the quality control and supervision work.

  19. Technological process supervising using vision systems cooperating with the LabVIEW vision builder

    Science.gov (United States)

    Hryniewicz, P.; Banaś, W.; Gwiazda, A.; Foit, K.; Sękala, A.; Kost, G.

    2015-11-01

    One of the most important tasks in the production process is to supervise its proper functioning. Lack of required supervision over the production process can lead to incorrect manufacturing of the final element, through the production line downtime and hence to financial losses. The worst result is the damage of the equipment involved in the manufacturing process. Engineers supervise the production flow correctness use the great range of sensors supporting the supervising of a manufacturing element. Vision systems are one of sensors families. In recent years, thanks to the accelerated development of electronics as well as the easier access to electronic products and attractive prices, they become the cheap and universal type of sensors. These sensors detect practically all objects, regardless of their shape or even the state of matter. The only problem is considered with transparent or mirror objects, detected from the wrong angle. Integrating the vision system with the LabVIEW Vision and the LabVIEW Vision Builder it is possible to determine not only at what position is the given element but also to set its reorientation relative to any point in an analyzed space. The paper presents an example of automated inspection. The paper presents an example of automated inspection of the manufacturing process in a production workcell using the vision supervising system. The aim of the work is to elaborate the vision system that could integrate different applications and devices used in different production systems to control the manufacturing process.

  20. New Building Technology, Innovation, and Government Interests

    National Research Council Canada - National Science Library

    2017-01-01

    This book explores innovation in the U.S. construction-related industries (i.e., design services, construction, building materials and products manufacture, and facilities operation and maintenance...

  1. Revisit of Energy Use and Technologies of High Performance Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Li, Cheng; Hong, Tianzhen

    2014-03-30

    Energy consumed by buildings accounts for one third of the world?s total primary energy use. Associated with the conscious of energy savings in buildings, High Performance Buildings (HPBs) has surged across the world, with wide promotion and adoption of various performance rating and certification systems. It is valuable to look into the actual energy performance of HPBs and to understand their influencing factors. To shed some light on this topic, this paper conducted a series of portfolio analysis based on a database of 51 high performance office buildings across the world. Analyses showed that the actual site Energy Use Intensity (EUI) of the 51 buildings varied by a factor of up to 11, indicating a large scale of variation of the actual energy performance of the current HPBs. Further analysis of the correlation between EUI and climate elucidated ubiquitous phenomenon of EUI scatter throughout all climate zones, implying that the weather is not a decisive factor, although important, for the actual energy consumption of an individual building. On the building size via EUI, analysis disclosed that smaller buildings have a tendency to achieving lower energy use. Even so, the correlation is not absolute since some large buildings demonstrated low energy use while some small buildings performed opposite. Concerning the technologies, statistics indicated that the application of some technologies had correlations with some specific building size and climate characteristic. However, it was still hard to pinpoint a set of technologies which was directly correlative with a group of low EUI buildings. It is concluded that no a single factor essentially determines the actual energy performance of HPBs. To deliver energy-efficient buildings, an integrated design taking account of climate, technology, occupant behavior as well as operation and maintenance should be implemented.

  2. Standardization of green building technologies for environment design

    Directory of Open Access Journals (Sweden)

    Benuzh Andrey

    2016-01-01

    Full Text Available The article describes the structure and field of standardization ISO / TC 205 “Building environment design”, provides examples of green building technologies. The main purpose of the article is to show the interaction between international ISO / TC 205 “Building environment design” and created in Russia in 2016 the Technical Committee of Standardization № 366 “Green technology of the build environment and green innovative products”. Both of these technical committees promote green building technologies for environment design, thereby deal with the negative impact on the environment and the reasons of global warming. Instead of buildings that attempt to suppress and overcome nature, why not design buildings that integrate with the environment, on every possible level? The international standardization work which ISO/TC 205 “Building environment design” performs seeks, in addition to lowering trade barriers for engineering design, to promote and facilitate the design of high performance buildings: higher performing as economic assets for their owners, higher performing as buildings that provide amenable indoor environment for their occupants, and higher performing with respect to resource utilization and environmental impact.

  3. Kollegial supervision

    DEFF Research Database (Denmark)

    Andersen, Ole Dibbern; Petersson, Erling

    Publikationen belyser, hvordan kollegial supervision i en kan organiseres i en uddannelsesinstitution......Publikationen belyser, hvordan kollegial supervision i en kan organiseres i en uddannelsesinstitution...

  4. The Building of Grass-roots Agricultural Technology Extension System

    Institute of Scientific and Technical Information of China (English)

    Wen; YANG; Jian; HUANG

    2013-01-01

    Based on the survey of 154 farmers in Guiyang City, we analyze the basic situation of building of grass-roots agricultural technology extension system in Guiyang City. Then we point out some problems in the building of grass-roots agricultural technology extension system in Guiyang City: the function of grass-roots agricultural technology extension center weakens; the content of agricultural technology extension is difficult to adapt to farmers’ needs for technology; the extension mode of agricultural technology departments does not adapt to the needs of modern agriculture. In order to perfect the building of grass-roots agricultural technology extension system, the countermeasures and recommendations are put forth as follows: strengthening the input of funds, and ensuring that the basic work of public welfare agricultural technology extension is smoothly carried out; innovating upon the system, and improving the function of grass-roots agricultural technology extension center; implementing management on agricultural technology extension personnel’s performance, and promoting the extension efficiency; strengthening the building of extension team in rural areas, and cultivating high-quality agricultural technology extension personnel; exploring the advanced service mode to meet farmers’ needs.

  5. Technology and society building our sociotechnical future

    CERN Document Server

    Wetmore, Jameson M

    2009-01-01

    Technological change does not happen in a vacuum; decisions about which technologies to develop, fund, market, and use engage ideas about values as well as calculations of costs and benefits. This anthology focuses on the interconnections of technology, society, and values. It offers writings by authorities as varied as Freeman Dyson, Laurence Lessig, Bruno Latour, and Judy Wajcman that will introduce readers to recent thinking about technology and provide them with conceptual tools, a theoretical framework, and knowledge to help understand how technology shapes society and how society shapes technology. It offers readers a new perspective on such current issues as globalization, the balance between security and privacy, environmental justice, and poverty in the developing world. The careful ordering of the selections and the editors' introductions give Technology and Society a coherence and flow that is unusual in anthologies. The book is suitable for use in undergraduate courses in STS and other disciplines...

  6. Building technology. Curse or blessing?; Woontechnologie. Vloek of zegen?

    Energy Technology Data Exchange (ETDEWEB)

    Puts, H. [Universiteit Utrecht, Utrecht (Netherlands); Vringer, K. [Milieu- en Natuurplanbureau MNP, RIVM, Bilthoven (Netherlands); Hekkert, M. [Departement Innovatie- en Milieuwetenschappen, Universiteit Utrecht, Utrecht (Netherlands)

    2003-11-01

    A brief overview is given of the effects of intelligent building technology (domotics) on energy consumption. [Dutch] Een kort overzicht wordt gegeven van de effecten van het gebruik van intelligente woontechnologie (domotica) op het energieverbruik.

  7. A new patented building technology based on ancient Roman knowledge

    DEFF Research Database (Denmark)

    Hertz, Kristian Dahl

    2010-01-01

    Super-light structures with pearl-chains is a new patented building technology by means of which you can build houses, bridges, tunnels, and even ships with longer spans, less material-, and energy consumption, without scaffolding, and making the use of arches, vaults, domes, ribbed shells, and new...

  8. A new patented building technology based on ancient Roman knowledge

    DEFF Research Database (Denmark)

    Hertz, Kristian Dahl

    2010-01-01

    Super-light structures with pearl-chains is a new patented building technology by means of which you can build houses, bridges, tunnels, and even ships with longer spans, less material-, and energy consumption, without scaffolding, and making the use of arches, vaults, domes, ribbed shells, and new...

  9. Tall Buildings and Elevators: A Review of Recent Technological Advances

    OpenAIRE

    Kheir Al-Kodmany

    2015-01-01

    Efficient vertical mobility is a critical component of tall building development and construction. This paper investigates recent advances in elevator technology and examines their impact on tall building development. It maps out, organizes, and collates complex and scattered information on multiple aspects of elevator design, and presents them in an accessible and non-technical discourse. Importantly, the paper contextualizes recent technological innovations by examining their implementation...

  10. Application of BIM technology in green scientific research office building

    Science.gov (United States)

    Ni, Xin; Sun, Jianhua; Wang, Bo

    2017-05-01

    BIM technology as a kind of information technology, has been along with the advancement of building industrialization application in domestic building industry gradually. Based on reasonable construction BIM model, using BIM technology platform, through collaborative design tools can effectively improve the design efficiency and design quality. Vanda northwest engineering design and research institute co., LTD., the scientific research office building project in combination with the practical situation of engineering using BIM technology, formed in the BIM model combined with related information according to the energy energy model (BEM) and the application of BIM technology in construction management stage made exploration, and the direct experience and the achievements gained by the architectural design part made a summary.

  11. Lack of supervision? The building manager`s task of supervising facility management systems; Ein Stiefkind der Planung? Objektueberwachung (Fachbauleitung) der technischen Gebaeudeausruestung

    Energy Technology Data Exchange (ETDEWEB)

    Bernhard, M. [IMB-Ingenieurteam Manfred Bernhard GmbH, Muehlheim am Main (Germany). Fachbauleitung Technische Gebaeudeausruestung

    1998-12-31

    The technical comfort requirements of new buildings and the resulting density of techncal facilities makes the task of builder-owners, architects and building managers increasingly difficult. Reasons for this are the lack of space available for the technical systems and the increasingly short construction times. (orig.) [Deutsch] Die Aufgabe des Fachbauleiters ist es, Fachkompetenz mit Auftraggeberfunktion zu praktizieren und dafuer zu sorgen, dass im Sinne des Auftraggebers der gesetzte Termin- und Finanzrahmen bei gleichzeitig hohem Qualitaetsanspruch eingehalten wird. Die technische Komfortausstattung von Grossobjekten und die daraus resultierende hohe Installationsdichte stellt immer groessere Anforderungen bei der Auftragsabwicklung an Auftraggeber, Architekten und planende Fachingenieure. Die Gruende hierfuer liegen u.a. in dem meist sehr begrenzten Platzangebot fuer die Technik und vor allem in den immer kuerzeren Bauzeiten der Objekte. (orig.)

  12. A Reading of the Technology Supervision Guide for Voltage Transformer%电压互感器技术监督导则解读

    Institute of Scientific and Technical Information of China (English)

    王伟; 寇晓适; 张洪涛; 王晓辉; 李予全; 马伦

    2015-01-01

    Combining with the new situation of three intensive management and five large-scale movements and with the purpose of "improving technology supervision organization system, perfecting technology supervision mechanism, strengthening technology supervision team construction", a reading of the technology supervision guide for voltage transformer is made. In the aspect of the content of the technical supervision, the content of the technology supervision guide for voltage transformer is interpreted including the stages of planning and feasibility study, engineering design, purchase and production, installation and adjustment, hand-over and acceptance, operation and maintenance, exit and abandonment, etc. In the aspect of system construction, the construction of the technology supervision system is interpreted in respects of technical supervision report, warning and alarm of the technical supervision, archives management, security system of technical supervision work. It provides an important technical basis for carrying out the work of technology supervision of voltage transformers in the whole process, comprehensive and full coverage ways.%结合"三集五大"的新形势,以"完善技术监督组织体系,健全技术监督工作机制,强化技术监督队伍建设"为目标,对电压互感器技术监督导则进行解读:在监督内容方面,从规划可研、工程设计、采购建设、安装调试、交接验收、运维检修、退出报废等10个阶段,详细解读电压互感器技术监督的内容;在体系建设方面,从技术监督报告、技术监督预警与告警、档案资料管理、技术监督工作保障体系4个方面详细介绍和解读电压互感器技术监督的体系建设情况,为全过程、全方位、全覆盖地开展电压互感器技术监督工作提供重要技术依据.

  13. Building business from technology: The Sandia experience

    Energy Technology Data Exchange (ETDEWEB)

    Traylor, L.B.

    1995-07-01

    This paper describes New Ventures, a new initiative at Sandia National Laboratories that encourages the creation of new businesses based on laboratory technology as a timely, efficient means of technology transfer. Sandia`s New Ventures program has shown that a dedicated effort can produce significant results. In the three years prior to this program`s launch, just two ventures per year on average were created based on laboratory technology. By comparison, the New Ventures program has enabled 20 new ventures in its first nine months of full operation.

  14. Building business from technology: The Sandia experience

    Energy Technology Data Exchange (ETDEWEB)

    Traylor, L.B.

    1995-07-01

    This paper describes New Ventures, a new initiative at Sandia National Laboratories that encourages the creation of new businesses based on laboratory technology as a timely, efficient means of technology transfer. Sandia`s New Ventures program has shown that a dedicated effort can produce significant results. In the three years prior to this program`s launch, just two ventures per year on average were created based on laboratory technology. By comparison, the New Ventures program has enabled 20 new ventures in its first nine months of full operation.

  15. A planning framework for transferring building energy technologies

    Energy Technology Data Exchange (ETDEWEB)

    Farhar, B C; Brown, M A; Mohler, B L; Wilde, M; Abel, F H

    1990-07-01

    Accelerating the adoption of new and existing cost-effective technologies has significant potential to reduce the energy consumed in US buildings. This report presents key results of an interlaboratory technology transfer planning effort in support of the US Department of Energy's Office of Building Technologies (OBT). A guiding assumption for planning was that OBT's R D program should forge linkages with existing programs whose goals involved enhancing energy efficiency in buildings. An ad hoc Technology Transfer Advisory Group reviewed the existing analysis and technology transfer program, brainstormed technology transfer approaches, interviewed DOE program managers, identified applicable research results, and developed a framework that management could use in deciding on the best investments of technology transfer resources. Representatives of 22 organizations were interviewed on their views of the potential for transferring energy efficiency technologies through active linking with OBT. The report describes these programs and interview results; outlines OBT tools, technologies, and practices to be transferred; defines OBT audiences; identifies technology transfer functions and presents a framework devised using functions and audiences; presents some 60 example technology transfer activities; and documents the Advisory Group's recommendations. 37 refs., 3 figs., 12 tabs.

  16. Technologies for greywater recycling in buildings

    OpenAIRE

    Laine, Anu Talvikki

    2001-01-01

    The potential of four pilot-scale wastewater treatment processes for in-building greywater recycling has been assessed. The evaluation of three membrane bioreactors (MBRs) and a biological aerated filter (BAF) was principally with reference to the non-potable water reuse quality standards. In the steady-state trials the feedwater quality was changed from synthetic greywater to blackwater (primary sewage influent) simulating the variability of domestic wastewater. The submerged MBR met bot...

  17. Airborne infections and modern building technology

    Energy Technology Data Exchange (ETDEWEB)

    LaForce, F.M.

    1986-01-01

    Over the last 30 yr an increased appreciation of the importance of airborne infection has evolved. The concept of droplet nuclei, infectious particles from 0.5 to 3 ..mu.. which stay suspended in air for long periods of time, has been accepted as an important determinant of infectivity. Important airborne pathogens in modern buildings include legionella pneumophila, Aspergillus sp., thermophilic actinomycetes, Mycobacterium tuberculosis, measles, varicella and rubella. Perhaps, the most important microbiologic threat to most buildings is L. pneumophila. This organism can multiply in water cooling systems and contaminate effluent air which can be drawn into a building and efficiently circulated throughout by existing ventilation systems. Hospitals are a special problem because of the concentration of immunosuppressed patients who are uniquely susceptible to airborne diseases such as aspergillosis, and the likelihood that patients ill from diseases that can be spread via the airborne route will be concentrated. Humidifiers are yet another problem and have been shown to be important in several outbreaks of allergic alveolitis and legionellosis. Control of airborne infections is largely an effort at identifying and controlling reservoirs of infection. This includes regular biocide treatment of cooling towers and evaporative condensers and identification and isolation of patients with diseases that may be spread via the airborne route.

  18. Potential for energy technologies in residential and commercial buildings

    Energy Technology Data Exchange (ETDEWEB)

    Glesk, M.M.

    1979-11-01

    The residential-commercial energy technology model was developed as a planning tool for policy analysis in the residential and commercial building sectors. The model and its procedures represent a detailed approach to estimating the future acceptance of energy-using technologies both in new construction and for retrofit into existing buildings. The model organizes into an analytical framework all relevant information and data on building energy technology, building markets, and government policy, and it allows for easy identification of the relative importance of key assumptions. The outputs include estimates of the degree of penetration of the various building energy technologies, the levels of energy use savings associated with them, and their costs - both private and government. The model was designed to estimate the annual energy savings associated with new technologies compared with continued use of conventional technology at 1975 levels. The amount of energy used under 1975 technology conditions is referred to as the reference case energy use. For analytical purposes the technologies were consolidated into ten groupings: electric and gas heat pumps; conservation categories I, II, and III; solar thermal (hot water, heating, and cooling); photovoltaics, and wind systems. These groupings clearly do not allow an assessment of the potential for individual technologies, but they do allow a reasonable comparison of their roles in the R/C sector. Assumptions were made regarding the technical and economic performances of the technologies over the period of the analysis. In addition, the study assessed the non-financial characteristics of the technologies - aesthetics, maintenance complexity, reliability, etc. - that will also influence their market acceptability.

  19. ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) PROGRAM: GREEN BUILDING TECHNOLOGIES

    Science.gov (United States)

    The U.S. Environmental Protection Agency (EPA) Environmental Technology Verification (ETV) Program evaluates the performance of innovative air, water, pollution prevention and monitoring technologies that have the potential to improve human health and the environment. This techno...

  20. Final Technical Report. Training in Building Audit Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Brosemer, Kathleen [Sault Sainte Marie Tribe of Chippewa Indians, Marie, MI (United States)

    2015-03-27

    In 2011, the Tribe proposed and was awarded the Training in Building Audit Technologies grant from the DOE in the amount of $55,748 to contract for training programs for infrared cameras, blower door technology applications and building systems. The coursework consisted of; Infrared Camera Training: Level I - Thermal Imaging for Energy Audits; Blower Door Analysis and Building-As-A-System Training, Building Performance Institute (BPI) Building Analyst; Building Envelope Training, Building Performance Institute (BPI) Envelope Professional; and Audit/JobFLEX Tablet Software. Competitive procurement of the training contractor resulted in lower costs, allowing the Tribe to request and receive DOE approval to additionally purchase energy audit equipment and contract for residential energy audits of 25 low-income Tribal Housing units. Sault Tribe personnel received field training to supplement the classroom instruction on proper use of the energy audit equipment. Field experience was provided through the second DOE energy audits grant, allowing Sault Tribe personnel to join the contractor, Building Science Academy, in conducting 25 residential energy audits of low-income Tribal Housing units.

  1. Diffusion of Energy Efficient Technology in Commercial Buildings: An Analysis of the Commercial Building Partnerships Program

    Science.gov (United States)

    Antonopoulos, Chrissi Argyro

    This study presents findings from survey and interview data investigating replication of green building measures by Commercial Building Partnership (CBP) partners that worked directly with the Pacific Northwest National Laboratory (PNNL). PNNL partnered directly with 12 organizations on new and retrofit construction projects, which represented approximately 28 percent of the entire U.S. Department of Energy (DOE) CBP program. Through a feedback survey mechanism, along with personal interviews, quantitative and qualitative data were gathered relating to replication efforts by each organization. These data were analyzed to provide insight into two primary research areas: 1) CBP partners' replication efforts of green building approaches used in the CBP project to the rest of the organization's building portfolio, and, 2) the market potential for technology diffusion into the total U.S. commercial building stock, as a direct result of the CBP program. The first area of this research focused specifically on replication efforts underway or planned by each CBP program participant. The second area of this research develops a diffusion of innovations model to analyze potential broad market impacts of the CBP program on the commercial building industry in the United States. Findings from this study provided insight into motivations and objectives CBP partners had for program participation. Factors that impact replication include motivation, organizational structure and objectives firms have for implementation of energy efficient technologies. Comparing these factors between different CBP partners revealed patterns in motivation for constructing energy efficient buildings, along with better insight into market trends for green building practices. The optimized approach to the CBP program allows partners to develop green building parameters that fit the specific uses of their building, resulting in greater motivation for replication. In addition, the diffusion model developed

  2. Integrated collaborative building design using Internet technology

    OpenAIRE

    Roshani, D.M.R.

    2005-01-01

    Communication between the parties in a project of an integrated collaborative engineering system has been the subject of active research for many years. The construction industry has a long tradition of collaborative working between the members of the construction team. At the design stage, this has traditionally been based on physical meetings between representatives of the principal design team members. To aid these meetings, the information and communication technologies that are currently...

  3. Evolution of prefabricated technologies applied to building schools

    OpenAIRE

    Pons, Oriol

    2010-01-01

    In the past ten years, a lot of school buildings have been built using prefabricated systems all over Spain. For example, more than 200 schools have been successfully industrialized since 2002 in Catalonia. These are modern schools that have been recognized for: their well designed architecture, their respectful relationship with their environs, their education spaces… This article aims to analyze these centers, along with the interesting technologies used to build them. This text is based on...

  4. Roadmap will point way for future intelligent building technologies

    Energy Technology Data Exchange (ETDEWEB)

    Anon

    2001-12-31

    A project, funded by five government departments, is underway to develop a roadmap, or guide, for intelligent building technologies to help the construction industry by identifying emerging technologies and market niches, and thereby help stakeholders to make investment and policy decisions. The project concentrates on technologies related to high-rise residential, commercial, industrial and institutional buildings, and covers a spectrum from main equipment to sensors, and communications, artificial reasoning and automated controls for energy management, office automation, indoor environment, local area networking, security, fire control, and maintenance scheduling. The project is overseen by the Institute for Research in Construction of the National Research Council. Also participating is the Continental Automated Building Association (CABA) who act as project managers. Steering committee membership includes representatives from Bell Canada, Honeywell, Hydro-Quebec, IBM, NRC, Natural Resources Canada, Nortel Networks, Siemens and Tridel Corporation. The project is expected to be completed in late spring/early summer of 2001.

  5. The Regulation of Technology-Assisted Distance Counseling and Supervision in the United States: An Analysis of Current Extent, Trends, and Implications

    Science.gov (United States)

    McAdams, Charles R.; Wyatt, Kristi Lee

    2010-01-01

    Counseling licensure boards report emerging needs to regulate technology-assisted distance counseling and supervision. An analysis of published regulations and telephone interviews with board administrators nationwide suggests that boards agree generally on 7 aspects of technology-assisted distance practice that need to be regulated. Nevertheless,…

  6. Modelling Technology for Building Fire Scene with Virtual Geographic Environment

    Science.gov (United States)

    Song, Y.; Zhao, L.; Wei, M.; Zhang, H.; Liu, W.

    2017-09-01

    Building fire is a risky activity that can lead to disaster and massive destruction. The management and disposal of building fire has always attracted much interest from researchers. Integrated Virtual Geographic Environment (VGE) is a good choice for building fire safety management and emergency decisions, in which a more real and rich fire process can be computed and obtained dynamically, and the results of fire simulations and analyses can be much more accurate as well. To modelling building fire scene with VGE, the application requirements and modelling objective of building fire scene were analysed in this paper. Then, the four core elements of modelling building fire scene (the building space environment, the fire event, the indoor Fire Extinguishing System (FES) and the indoor crowd) were implemented, and the relationship between the elements was discussed also. Finally, with the theory and framework of VGE, the technology of building fire scene system with VGE was designed within the data environment, the model environment, the expression environment, and the collaborative environment as well. The functions and key techniques in each environment are also analysed, which may provide a reference for further development and other research on VGE.

  7. 无人机技术在长江海事监管中的应用%The Application of Unmanned Aerial Vehicle Technology in the Yangtze River Maritime Supervision

    Institute of Scientific and Technical Information of China (English)

    陈俊; 王茹军; 熊辉; 曹阳; 翟平

    2015-01-01

    为了打造长江干线全方位覆盖、全天候运行、具备快速反应能力的现代化水上安全监管和应急救助体系,将无人机技术引入海事监管过程当中。分析无人机应用于海事监管的优势,并研究其应用于海事监管的可行性。拓展无人机在海事监管业务中的应用,提出长江海事无人机系统建设思路。系统的建设分为实验阶段、大规模实施阶段和网络建设和应用阶段,目标是建成水-岸-空海事立体监管系统,提升长江海事监管水平。%In order to build modern water safety regulation and emergency rescue system that contains the Yangtze trunk full coverage,all-weather operation,and rapid response ability is necessary.This paper applies unmanned aerial vehicle (UAV)technology into maritime regulatory process,the advan-tages of application of the maritime supervision UAVs is analyzed in detail;the feasibility of the appli-cation of the maritime supervision is carried on.Finally,the applications for UAV are introduced in maritime supervision business,the idea of Yangtze River maritime UAV system construction is sys-tematically introduced,which is divided into the experimental stage,large-scale implementation stage and the network construction and application stage,the proposal aims to build water-Coast-Marine Stereo regulatory system and enhance the level of the Yangtze River maritime supervision.

  8. How to Build a Supervised Autonomous System for Robot-Enhanced Therapy for Children with Autism Spectrum Disorder

    Directory of Open Access Journals (Sweden)

    Esteban Pablo G.

    2017-04-01

    Full Text Available Robot-Assisted Therapy (RAT has successfully been used to improve social skills in children with autism spectrum disorders (ASD through remote control of the robot in so-called Wizard of Oz (WoZ paradigms.However, there is a need to increase the autonomy of the robot both to lighten the burden on human therapists (who have to remain in control and, importantly, supervise the robot and to provide a consistent therapeutic experience. This paper seeks to provide insight into increasing the autonomy level of social robots in therapy to move beyond WoZ. With the final aim of improved human-human social interaction for the children, this multidisciplinary research seeks to facilitate the use of social robots as tools in clinical situations by addressing the challenge of increasing robot autonomy.We introduce the clinical framework in which the developments are tested, alongside initial data obtained from patients in a first phase of the project using a WoZ set-up mimicking the targeted supervised-autonomy behaviour. We further describe the implemented system architecture capable of providing the robot with supervised autonomy.

  9. Web Interfacing for Task Supervision and Specification

    OpenAIRE

    Tomatis, N.; Moreau, B.

    2001-01-01

    The Autonomous Systems Lab at the Swiss Federal Institute of Technology Lausanne (EPFL) is engaged in mobile robotics research. The lab’s research focuses mainly on indoor localization and map building, outdoor locomotion and navigation, and micro mobile robotics. In the framework of a research project on mobile robot localization, a graphical web interface for our indoor robots has been developed. The purpose of this interface is twofold: it serves as a tool for task supervision for the rese...

  10. Technology Roadmaps: Energy-efficient Buildings: Heating and Cooling Equipment

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    Buildings account for almost a third of final energy consumption globally and are an equally important source of CO2 emissions. Currently, both space heating and cooling as well as hot water are estimated to account for roughly half of global energy consumption in buildings. Energy-efficient and low/zero-carbon heating and cooling technologies for buildings have the potential to reduce CO2 emissions by up to 2 gigatonnes (Gt) and save 710 million tonnes oil equivalent (Mtoe) of energy by 2050. Most of these technologies -- which include solar thermal, combined heat and power (CHP), heat pumps and thermal energy storage -- are commercially available today. The Energy-Efficient Buildings: Heating and Cooling Equipment Roadmap sets out a detailed pathway for the evolution and deployment of the key underlying technologies. It finds that urgent action is required if the building stock of the future is to consume less energy and result in lower CO2 emissions. The roadmap concludes with a set of near-term actions that stakeholders will need to take to achieve the roadmap's vision.

  11. BEHAVIOUR OF STONE FACADES IN URBAN CENTERS INNOVATIVE BUILDING TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Antonio Monaco

    1990-12-01

    Full Text Available An innovative technology using stone and granite as exterior sheeting of modern steel and concrete tall buildings is presented, Granites are chosen for the indubitable superior durability in any wheather and polluted atmosfere condition. But to guarantee durability stone sheets have to be mounted in such a way as to avoid any inner irregular stress. In particular stresses from deformation of the main structure must not be trasmitted to the exterior sheeting. Moreover an all-proof wheather barrier has to be incorporated in the factory builded sheeting panel. The innovative technology allowing use of granite and stone in facing of tall buildings is here presented along with two very important realisations: The North Tower in Genoa and the Canary Wharf in London.

  12. Office of Building Technologies evaluation and planning report

    Energy Technology Data Exchange (ETDEWEB)

    Pierce, B.

    1994-06-01

    The US Department of Energy (DOE) Office of Building Technologies (OBT) encourages increased efficiency of energy use in the buildings sector through the conduct of a comprehensive research program, the transfer of research results to industry, and the implementation of DOE`s statutory responsibilities in the buildings area. The planning and direction of these activities require the development and maintenance of database and modeling capability, as well as the conduct of analyses. This report summarizes the results of evaluation and planning activities undertaken on behalf of OBT during the past several years. It provides historical data on energy consumption patterns, prices, and building characteristics used in OBT`s planning processes, and summaries of selected recent OBT analysis activities.

  13. Office of Building Technologies evaluation and planning report

    Energy Technology Data Exchange (ETDEWEB)

    Pierce, B.

    1994-06-01

    The US Department of Energy (DOE) Office of Building Technologies (OBT) encourages increased efficiency of energy use in the buildings sector through the conduct of a comprehensive research program, the transfer of research results to industry, and the implementation of DOE`s statutory responsibilities in the buildings area. The planning and direction of these activities require the development and maintenance of database and modeling capability, as well as the conduct of analyses. This report summarizes the results of evaluation and planning activities undertaken on behalf of OBT during the past several years. It provides historical data on energy consumption patterns, prices, and building characteristics used in OBT`s planning processes, and summaries of selected recent OBT analysis activities.

  14. Configuration and supervision of advanced distributed data acquisition and processing systems for long pulse experiments using JINI technology

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez, Joaquin; Ruiz, Mariano [Grupo de Investigacion en Instrumentacion y Acustica Aplicada, Universidad Politecnica de Madrid (UPM), Ctra. Valencia Km-7, 28031, Madrid (Spain); Barrera, Eduardo [Grupo de Investigacion en Instrumentacion y Acustica Aplicada, Universidad Politecnica de Madrid (UPM), Ctra. Valencia Km-7, 28031, Madrid (Spain)], E-mail: eduardo.barrera@upm.es; Lopez, Juan Manuel; de Arcas, Guillermo [Grupo de Investigacion en Instrumentacion y Acustica Aplicada, Universidad Politecnica de Madrid (UPM), Ctra. Valencia Km-7, 28031, Madrid (Spain); Vega, Jesus [Asociacion EURATOM/CIEMAT para Fusion, Avda. Complutense 22, 28040, Madrid (Spain)

    2009-06-15

    The development of tools for managing the capabilities and functionalities of distributed data acquisition systems is essential in long pulse fusion experiments. The intelligent test and measurement system (ITMS) developed by UPM and CIEMAT is a technology that permits implementation of a scalable data acquisition and processing system based on PXI or CompactPCI hardware. Several applications based on JINI technology have been developed to enable use of this platform for extensive implementation of distributed data acquisition and processing systems. JINI provides a framework for developing service-oriented, distributed applications. The applications are based on the paradigm of a JINI federation that supports mechanisms for publication, discovering, subscription, and links to remote services. The model we implemented in the ITMS platform included services in the system CPU (SCPU) and peripheral CPUs (PCPUs). The resulting system demonstrated the following capabilities: (1) setup of the data acquisition and processing to apply to the signals, (2) information about the evolution of the data acquisition, (3) information about the applied data processing and (4) detection and distribution of the events detected by the ITMS software applications. With this approach, software applications running on the ITMS platform can be understood, from the perspective of their implementation details, as a set of dynamic, accessible, and transparent services. The search for services is performed using the publication and subscription mechanisms of the JINI specification. The configuration and supervision applications were developed using remotely accessible (LAN or WAN) objects. The consequence of this approach is a hardware and software architecture that provides a transparent model of remote configuration and supervision, and thereby a means to simplify the implementation of a distributed data acquisition system with scalable and dynamic local processing capability developed in a

  15. Energy-efficient building design and operation: The role of computer technology

    Energy Technology Data Exchange (ETDEWEB)

    Brambley, M.R.

    1990-09-01

    Computer technology provides many opportunities to improve the energy performance of commercial buildings throughout the entire building life cycle. We are faced with developing those technologies to put the results of many years of buildings research into the hands of building owners, designers, and operators. This report discusses both the philosophical and technological aspect associated with this topic.

  16. Strategies for Promoting Green Building Technologies Adoption in the Construction Industry-An International Study

    National Research Council Canada - National Science Library

    Albert Ping Chuen Chan; Amos Darko; Ernest Effah Ameyaw

    2017-01-01

    Because green building technologies (GBTs) adoption is a promising way of ameliorating the sustainability performance of buildings, GBTs are receiving increased interest in the global construction community...

  17. 环境监管物联网技术架构及应用体系研究%Environmental Supervision Iot Technology Architecture and Application System Research

    Institute of Scientific and Technical Information of China (English)

    游波; 甄欣

    2015-01-01

    物联网是支撑环境管理由粗放向精细、被动向主动转变的重要技术手段,本文以重庆市环境监管物联网为例,阐述了环境监管物联网建设的必要性、可行性,提出了环境监管物联网"一网一库一平台"的技术架构及融合监管网格化、PPP模式等要素的应用体系,对环保物联网技术与管理实际融合进行了探索.%the Internet of things is the important technical method to support environmental management change from extensive to elaborate, passive to take the initiative. This paper is to the Chongqing environmental supervision iot as an example, expounds the necessity and feasibility of environmental supervision iot construction, puts forward environmental supervision iot "a network,a library,a platform"technology architecture and application system of fusion grid supervision, PPP pattern and other factors.Environmental supervision iot technology and management of practical fusion are explored.

  18. Tall Buildings and Elevators: A Review of Recent Technological Advances

    Directory of Open Access Journals (Sweden)

    Kheir Al-Kodmany

    2015-09-01

    Full Text Available Efficient vertical mobility is a critical component of tall building development and construction. This paper investigates recent advances in elevator technology and examines their impact on tall building development. It maps out, organizes, and collates complex and scattered information on multiple aspects of elevator design, and presents them in an accessible and non-technical discourse. Importantly, the paper contextualizes recent technological innovations by examining their implementations in recent major projects including One World Trade Center in New York; Shanghai Tower in Shanghai; Burj Khalifa in Dubai; Kingdom Tower in Jeddah, Saudi Arabia; and the green retrofit project of the Empire State Building in New York. Further, the paper discusses future vertical transportation models including a vertical subway concept, a space lift, and electromagnetic levitation technology. As these new technological advancements in elevator design empower architects to create new forms and shapes of large-scale, mixed-use developments, this paper concludes by highlighting the need for interdisciplinary research in incorporating elevators in skyscrapers.

  19. A Semantics-Rich Information Technology Architecture for Smart Buildings

    Directory of Open Access Journals (Sweden)

    Dario Bonino

    2014-11-01

    Full Text Available The design of smart homes, buildings and environments currently suffers from a low maturity of available methodologies and tools. Technologies, devices and protocols strongly bias the design process towards vertical integration, and more flexible solutions based on separation of design concerns are seldom applied. As a result, the current landscape of smart environments is mostly populated by defectively designed solutions where application requirements (e.g., end-user functionality are too often mixed and intertwined with technical requirements (e.g., managing the network of devices. A mature and effective design process must, instead, rely on a clear separation between the application layer and the underlying enabling technologies, to enable effective design reuse. The role of smart gateways is to enable this separation of concerns and to provide an abstracted view of available automation technology to higher software layers. This paper presents a blueprint for the information technology (IT architecture of smart buildings that builds on top of established software engineering practices, such as model-driven development and semantic representation, and that avoids many pitfalls inherent in legacy approaches. The paper will also present a representative use case where the approach has been applied and the corresponding modeling and software tools.

  20. Technologies for building integrated energy supply; Teknologier for bygningsintegreret energiforsyning

    Energy Technology Data Exchange (ETDEWEB)

    Katic, I.

    2011-07-15

    The current report is part of the deliverables from the project ''Building Integrated Energy Supply'' supported by the Danish Energy Authority R and D program. It describes a range of technologies for individual supply of heat and/or electricity to dwellings with respect to their stage of development and possible application in the near future. Energy supply of buildings is becoming more and more complex, partly as a result of increasing demands for comfort, efficiency and reduced emissions, partly as a result of rising oil prices and improved competitiveness of alternative energy sources. The days where ordinary boilers were the dominant source of individual supply of dwellings are becoming past these years. The challenge of the new range of technologies lies to a high extent in the fluctuating nature of their energy conversion and their interaction with the supply grids for heat and electricity. There is thus an increasing demand to understand the nature of the different supply technologies, besides a regular update of their economical key figures. The technologies briefly described in this study are: Solar heating, passive solar energy, biofuel boilers, heat pumps, micro CHP, solar photovoltaic and energy storage systems. The selected technologies are all assessed to play an important role in future's mix of supply technologies in Denmark, especially heat pumps and solar. (Author)

  1. Emerging Energy-Efficient Technologies in Buildings Technology Characterizations for Energy Modeling

    Energy Technology Data Exchange (ETDEWEB)

    Hadley, SW

    2004-10-11

    The energy use in America's commercial and residential building sectors is large and growing. Over 38 quadrillion Btus (Quads) of primary energy were consumed in 2002, representing 39% of total U.S. energy consumption. While the energy use in buildings is expected to grow to 52 Quads by 2025, a large number of energy-related technologies exist that could curtail this increase. In recent years, improvements in such items as high efficiency refrigerators, compact fluorescent lights, high-SEER air conditioners, and improved building shells have all contributed to reducing energy use. Hundreds of other technology improvements have and will continue to improve the energy use in buildings. While many technologies are well understood and are gradually penetrating the market, more advanced technologies will be introduced in the future. The pace and extent of these advances can be improved through state and federal R&D. This report focuses on the long-term potential for energy-efficiency improvement in buildings. Five promising technologies have been selected for description to give an idea of the wide range of possibilities. They address the major areas of energy use in buildings: space conditioning (33% of building use), water heating (9%), and lighting (16%). Besides describing energy-using technologies (solid-state lighting and geothermal heat pumps), the report also discusses energy-saving building shell improvements (smart roofs) and the integration of multiple energy service technologies (CHP packaged systems and triple function heat pumps) to create synergistic savings. Finally, information technologies that can improve the efficiency of building operations are discussed. The report demonstrates that the United States is not running out of technologies to improve energy efficiency and economic and environmental performance, and will not run out in the future. The five technology areas alone can potentially result in total primary energy savings of between 2 and

  2. The new chamber building of Malta: architectural image and building technology

    Directory of Open Access Journals (Sweden)

    Vincenzo Sapienza

    2014-10-01

    Full Text Available The knowledge of the most innovative technologies is a basic tool for all the protagonists of the building process. This is because the right resolution of the details is the main way to obtain an architectonic image that is correctly related to the design intents. This work would like to contribute to the spread of the expertise, through the choice of an interesting case study: the new Chamber Building of the Republic of Malta. The history of construction has in the evolution of the stone technology one of the most complex and interesting matter, since the Roman age. The last chapter is probably written in the new Chamber Building of the Republic of Malta, that is going to be finished in the next few months. The concept of the stone façade is founded on two main points, the formal image and the functionality. The article is addressed to the designers, construction managers and researchers who would like to have an approach to the most innovative building technologies.

  3. The Impact of Technology-Enhanced Student Teacher Supervision on Student Teacher Knowledge, Performance, and Self-Efficacy during the Field Experience

    Science.gov (United States)

    Kopcha, Theodore J.; Alger, Christianna

    2011-01-01

    The eSupervision instructional program is a series of five online modules housed in a content management system that support triad members (student teachers, cooperating teachers, university supervisors) during the field experience. The program was designed on a cognitive apprenticeship framework and uses a variety of technology to support both…

  4. 浅谈监理在建筑防水工程中的主要监控措施%The Main Control Measures of the Supervision of Building Waterproofing Engineering

    Institute of Scientific and Technical Information of China (English)

    谭兵

    2014-01-01

    Building waterproof technology plays a functional role in protection of housing construction, That the housing construction can ensure al parts to be not subjected to various water leakage is directly related to the use of housing function, quality of life of owners and living environment. This paper di-scussed some supervision measures of quality control of wate-rproof engineering including basement waterproof, floor wat-erproof and building surface waterproof.%建筑防水技术在房屋建筑中发挥功能保障作用,房屋建筑所有部位能否保证免受各种水的侵入而不渗漏,直接关系到房屋的使用功能、生活质量和人居环境。本文着重谈了监理对地下室防水工程、屋面防水和楼面防水质量控制的一些监理措施。

  5. Standards, building codes, and certification programs for solar technology applicatons

    Energy Technology Data Exchange (ETDEWEB)

    Riley, J. D.; Odland, R.; Barker, H.

    1979-07-01

    This report is a primer on solar standards development. It explains the development of standards, building code provisions, and certification programs and their relationship to the emerging solar technologies. These areas are important in the commercialization of solar technology because they lead to the attainment of two goals: the development of an industry infrastructure and consumer confidence. Standards activities in the four phases of the commercialization process (applied research, development, introduction, and diffusion) are discussed in relation to institutional issues. Federal policies have been in operation for a number of years to accelerate the development process for solar technology. These policies are discussed in light of the Office of Management and Budget (OMB) Circular on federal interaction with the voluntary consensus system, and in light of current activities of DOE, HUD, and other interested federal agencies. The appendices cover areas of specific interest to different audiences: activities on the state and local level; and standards, building codes, and certification programs for specific technologies. In addition, a contract for the development of a model solar document let by DOE to a model consortium is excerpted in the Appendix.

  6. Online supervision at the university

    DEFF Research Database (Denmark)

    Bengtsen, Søren Smedegaard; Jensen, Gry Sandholm

    2015-01-01

    The article presents and condenses the background, findings and results of a one yearlong research project on online supervision and feedback at the university. The article builds on presentations and discussions in different research environments and conferences on higher education research...... supervision proves unhelpful when trying to understand how online supervision and feedback is a pedagogical phenomenon in its own right, and irreducible to the face-to-face context. Secondly we show that not enough attention has been given to the way different digital tools and platforms influence...... the supervisory dialogue in the specific supervision context. We conclude by terming this challenge in online supervision a form of ‘torn pedagogy’; that online tools and platforms destabilise and ‘tear’ traditional understandings of supervision pedagogy ‘apart’. Also, we conclude that on the backdrop of a torn...

  7. Solvency II and XBRL: New Rules and Technologies in Insurance Supervision

    Directory of Open Access Journals (Sweden)

    Enrique BONSON

    2008-11-01

    Full Text Available Purpose – the aim of this paper is to analyze the way in which the insurance industry is confronting the renewal of its regulatory framework with respect to the levels of solvency that insurance entities should maintain, and how technological initiatives in general, and the implementation of the eXtensible Business Reporting Language (XBRL mark-up language in particular, are making a key contribution to the process of adaptation to the new regulation. Design/methodology/approach – In this general review, we analyse the particular advantages that the application of the XBRL standard can offer in this process, and highlight new lines for further research. Findings – In this scenario, it is becoming urgent to have available a technological system such XBRL, that provides support to the important and periodical operations of consolidation of financial information, and to ensure the digital transparency of the insurer organisations that are engaged in this new regulatory challenge. Practical implications – XBRL represents the key resource for the information support used in the European COREP project for implementation of Basle II in the Union, so, the implementation of Solvency II can take full advantage of this previous experience. For that reason, a proposal for action is incorporated. Originality/value – the affiliation of the authors to the insurance sector, the academia and the XBRL community contributes to a complete view of the possibilities of this breaking project.

  8. Building technological capability within satellite programs in developing countries

    Science.gov (United States)

    Wood, Danielle; Weigel, Annalisa

    2011-12-01

    This paper explores the process of building technological capability in government-led satellite programs within developing countries. The key message is that these satellite programs can learn useful lessons from literature in the international development community. These lessons are relevant to emerging satellite programs that leverage international partnerships in order to establish local capability to design, build and operate satellites. Countries with such programs include Algeria, Nigeria, Turkey, Malaysia and the United Arab Emirates. The paper first provides background knowledge about space activity in developing countries, and then explores the nuances of the lessons coming from the international development literature. Developing countries are concerned with satellite technology because satellites provide useful services in the areas of earth observation, communication, navigation and science. Most developing countries access satellite services through indirect means such as sharing data with foreign organizations. More countries, however, are seeking opportunities to develop satellite technology locally. There are objective, technically driven motivations for developing countries to invest in satellite technology, despite rich debate on this topic. The paper provides a framework to understand technical motivations for investment in satellite services, hardware, expertise and infrastructure in both short and long term. If a country decides to pursue such investments they face a common set of strategic decisions at the levels of their satellite program, their national context and their international relationships. Analysis of past projects shows that countries have chosen diverse strategies to address these strategic decisions and grow in technological capability. What is similar about the historical examples is that many countries choose to leverage international partnerships as part of their growth process. There are also historical examples from

  9. International vs. domestic technology in-licensing: How do Chinese firms build their technological capabilities?

    DEFF Research Database (Denmark)

    Li, Ying; Wang, Yuandi

    2011-01-01

    attention in the extant literature on both innovation management and international business. However, little has been done to reach a clear understanding on whether Chinese firms can benefit from international or domestic technology in-licensing and improve their own technological capabilities. This study......This paper investigates the different impacts of international and domestic technology in-licensing for Chinese firms as licensees on their technological capability building. The evolution of firms in developing countries and development of their technological capabilities has received increasing......, therefore, pursues this endeavor by using a unique dataset from China State of Intellectual Property Office (SIPO) containing information on large Chinese firms. The findings of this empirical study indicate that firms with international technology in-licensing possess stronger technological innovation...

  10. Understanding the build-up of a technological innovation system around hydrogen and fuel cell technologies

    Energy Technology Data Exchange (ETDEWEB)

    Suurs, Roald A.A. [Innovation Studies Group, Copernicus Institute for Sustainable Development and Innovation, Utrecht University, Heidelberglaan 2, 3584 CS Utrecht (Netherlands); TNO Built Environment and Geosciences, Business Unit Innovation and Environment, Van Mourik Broekmanweg 6, 2628 XE Delft (Netherlands); Hekkert, Marko P.; Smits, Ruud E.H.M. [Innovation Studies Group, Copernicus Institute for Sustainable Development and Innovation, Utrecht University, Heidelberglaan 2, 3584 CS Utrecht (Netherlands)

    2009-12-15

    This study provides insight into the development of hydrogen and fuel cell technologies in the Netherlands (1980-2007). This is done by applying a Technological Innovation System (TIS) approach. This approach takes the perspective that a technology is shaped by a surrounding network of actors, institutions and technologies. When a technology is in an early stage of development, a TIS has yet to be built up in order to propel technological progress. This build-up process is studied for the hydrogen and fuel cell innovation system in the Netherlands. This is done by systematically studying the dynamics of seven key activities that accelerated (or slowed down) developments around hydrogen and fuel cell technologies. The analysis contributes to a better understanding of these dynamics and of the drivers and barriers that caused them to emerge. The study derives important lessons for practitioners. (author)

  11. Clinical supervision.

    Science.gov (United States)

    Goorapah, D

    1997-05-01

    The introduction of clinical supervision to a wider sphere of nursing is being considered from a professional and organizational point of view. Positive views are being expressed about adopting this concept, although there are indications to suggest that there are also strong reservations. This paper examines the potential for its success amidst the scepticism that exists. One important question raised is whether clinical supervision will replace or run alongside other support systems.

  12. Capacity building in renewable energy technologies in developing countries

    Energy Technology Data Exchange (ETDEWEB)

    Fridleifsson, Ingvar

    2010-09-15

    The renewable energy sources are expected to provide 20-40% of the world primary energy in 2050, depending on scenarios. A key element in the mitigation of climate change is capacity building in renewable energy technologies in the developing countries, where the main energy use growth is expected. An innovative training programme for geothermal energy professionals developed in Iceland is an example of how this can be done effectively. In 1979-2009, 424 scientists/engineers from 44 developing countries have completed the 6 month courses. In many countries in Africa, Asia, C-America, and E-Europe, UNU-GTP Fellows are among the leading geothermal specialists.

  13. Intelligence, integration & industrialisation for the building services technologies of the future

    DEFF Research Database (Denmark)

    Marsh, Rob

    2007-01-01

    The hypothesis of this paper is that the construction sector's industrial transformation needs to focus on integrating building services technologies in the buildings of the future. This can be achieved by analysing developments in intelligent building services, exploring design strategies...... for effectively integrating building services, and by developing new industrialised solutions for building services technologies. This paper is based on current Danish research and practice, and it is based on linking research knowledge on building services to knowledge on user needs, building design and new...

  14. DEVELOPMENT OF IMPORT-SUBSTITUTING TECHNOLOGIES FOR BUILDING MATERIAL PRODUCTION

    Directory of Open Access Journals (Sweden)

    N. I. Berezovsky

    2014-01-01

    Full Text Available The paper presents results of investigations on rational usage of mineral resources. In particular, it has shown the possibility to increase a period of raw material serviceability and its application for production of building products depending on chemical and mineralogical composition of the waste. Analysis of the executed investigations shows that import substitution of anthracite, lignite and black coal for local fuels (milled peat and its sub-standard product is possible in the production technology of porous building materials.A mathematical model for drying process has been developed in the paper. Technology for thermal performance of a sintering machine with calculation of its length at the given pallet speed has been proposed on the basis of the developed model. Once-through circulation of flue gases and heated materials is the main specific feature of belt sintering machines being used in production. In such a case the whole drying process can be divided into two periods: a period of constant drying rate and a period of falling drying rate. Calculations have shown that the drying rate depends on moisture content but it does not depend on heat exchange Bio-criteria, however, heating rate is a function of temperature and Biq. A mechanism of moisture transfer using various drying methods is the same as in an environment with constant temperature and so in an environment with variable temperature. Application of the mathematical model provides the possibility to save significantly power resources expended for drying process.The paper gives description of methodology for calculation of technologically important optimum parameters for sintering processes of agglomeration while using milled peat.

  15. Integrated Building Energy Systems Design Considering Storage Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Stadler, Michael; Marnay, Chris; Siddiqui, Afzal; Lai, Judy; Aki, Hirohisa

    2009-04-07

    The addition of storage technologies such as flow batteries, conventional batteries, and heat storage can improve the economic, as well as environmental attraction of micro-generation systems (e.g., PV or fuel cells with or without CHP) and contribute to enhanced demand response. The interactions among PV, solar thermal, and storage systems can be complex, depending on the tariff structure, load profile, etc. In order to examine the impact of storage technologies on demand response and CO2 emissions, a microgrid's distributed energy resources (DER) adoption problem is formulated as a mixed-integer linear program that can pursue two strategies as its objective function. These two strategies are minimization of its annual energy costs or of its CO2 emissions. The problem is solved for a given test year at representative customer sites, e.g., nursing homes, to obtain not only the optimal investment portfolio, but also the optimal hourly operating schedules for the selected technologies. This paper focuses on analysis of storage technologies in micro-generation optimization on a building level, with example applications in New York State and California. It shows results from a two-year research projectperformed for the U.S. Department of Energy and ongoing work. Contrary to established expectations, our results indicate that PV and electric storage adoption compete rather than supplement each other considering the tariff structure and costs of electricity supply. The work shows that high electricity tariffs during on-peak hours are a significant driver for the adoption of electric storage technologies. To satisfy the site's objective of minimizing energy costs, the batteries have to be charged by grid power during off-peak hours instead of PV during on-peak hours. In contrast, we also show a CO2 minimization strategy where the common assumption that batteries can be charged by PV can be fulfilled at extraordinarily high energy costs for the site.

  16. Whither Supervision?

    Directory of Open Access Journals (Sweden)

    Duncan Waite

    2006-11-01

    Full Text Available This paper inquires if the school supervision is in decadence. Dr. Waite responds that the answer will depend on which perspective you look at it. Dr. Waite suggests taking in consideration three elements that are related: the field itself, the expert in the field (the professor, the theorist, the student and the administrator, and the context. When these three elements are revised, it emphasizes that there is not a consensus about the field of supervision, but there are coincidences related to its importance and that it is related to the improvement of the practice of the students in the school for their benefit. Dr. Waite suggests that the practice on this field is not always in harmony with what the theorists affirm. When referring to the supervisor or the skilled person, the author indicates that his or her perspective depends on his or her epistemological believes or in the way he or she conceives the learning; that is why supervision can be understood in different ways. About the context, Waite suggests that there have to be taken in consideration the social or external forces that influent the people and the society, because through them the education is affected. Dr. Waite concludes that the way to understand the supervision depends on the performer’s perspective. He responds to the initial question saying that the supervision authorities, the knowledge on this field, the performers, and its practice, are maybe spread but not extinct because the supervision will always be part of the great enterprise that we called education.

  17. COMPETENCE BUILDING FRAMEWORK REQUIREMENTS FOR INFORMATION TECHNOLOGY FOR EDUCATIONAL MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Rakesh Mohan Bhatt

    2016-01-01

    Full Text Available Progressive efforts have been evolving continuously for the betterment of the services of the Information Technology for Educational Management(ITEM. These services require data intensive and communication intensive applications. Due to the massive growth of information, situation becomes difficult to manage these services. Here the role of the Information and Communication Technology (ICT infrastructure particularly data centre with communication components becomes important to facilitate these services. The present paper discusses the related issues such as competent staff, appropriate ICT infrastructure, ICT acceptance level etc. required for ITEM competence building framework considering the earlier approach for core competences for ITEM. It this connection, it is also necessary to consider the procurement of standard and appropriate ICT facilities. This will help in the integration of these facilities for the future expansion. This will also enable to create and foresee the impact of the pairing the management with information, technology, and education components individually and combined. These efforts will establish a strong coupling between the ITEM activities and resource management for effective implementation of the framework.

  18. Open standard building in South Africa: new concepts, strategies and technologies

    CSIR Research Space (South Africa)

    Van Wyk, Llewellyn V

    2008-03-01

    Full Text Available ” of the structures prohibited adaptation over time. This paper constructs a framework for developing, validating, and applying Open Standard Building in South Africa. The paper finds that Open Standard Building concepts, strategies and technologies can deliver...

  19. Lipid Processing Technology: Building a Multilevel Modeling Network

    DEFF Research Database (Denmark)

    Díaz Tovar, Carlos Axel; Mustaffa, Azizul Azri; Mukkerikar, Amol

    2011-01-01

    in design and analysis of unit operations; iv) the information and models developed are used as building blocks in the development of methods and tools for computer-aided synthesis and design of process flowsheets (CAFD). The applicability of this methodology is highlighted in each level of modeling through......The aim of this work is to present the development of a computer aided multilevel modeling network for the systematic design and analysis of processes employing lipid technologies. This is achieved by decomposing the problem into four levels of modeling: i) pure component property modeling...... and a lipid-database of collected experimental data from industry and generated data from validated predictive property models, as well as modeling tools for fast adoption-analysis of property prediction models; ii) modeling of phase behavior of relevant lipid mixtures using the UNIFACCI model, development...

  20. Building Robust E-learning Software Systems Using Web Technologies

    Directory of Open Access Journals (Sweden)

    Diana BUTUCEA

    2011-01-01

    Full Text Available Building a robust e-learning software platform represents a major challenge for both the project manager and the development team. Since functionalities of these software systems improves and grows by the day, several aspects must be taken into consideration – e.g. workflows, use-casesor alternative scenarios – in order to create a well standardized and fully functional integrated learning management system. The paper will focus on a model of implementation for an e-learning software system, analyzing its features, its functional mechanisms as well as exemplifying an implementation algorithm. A list of some of the mostly used web technologies (both server-side and client-side will be analyzed and a discussion over major security leaks of web applicationswill also be put in discussion.

  1. Simulation Technology Laboratory Building 970 hazards assessment document

    Energy Technology Data Exchange (ETDEWEB)

    Wood, C.L.; Starr, M.D.

    1994-11-01

    The Department of Energy Order 5500.3A requires facility-specific hazards assessments be prepared, maintained, and used for emergency planning purposes. This hazards assessment document describes the chemical and radiological hazards associated with the Simulation Technology Laboratory, Building 970. The entire inventory was screened according to the potential airborne impact to onsite and offsite individuals. The air dispersion model, ALOHA, estimated pollutant concentrations downwind from the source of a release, taking into consideration the toxicological and physical characteristics of the release site, the atmospheric conditions, and the circumstances of the release. The greatest distances at which a postulated facility event will produce consequences exceeding the ERPG-2 and Early Severe Health Effects thresholds are 78 and 46 meters, respectively. The highest emergency classification is a Site Area Emergency. The Emergency Planning Zone is 100 meters.

  2. Building Learning Modules for Undergraduate Education Using LEAD Technology

    Science.gov (United States)

    Clark, R. D.; Yalda, S.

    2006-12-01

    Linked Environments for Atmospheric Discovery (LEAD) has as its goal to make meteorological data, forecast models, and analysis and visualization tools available to anyone who wants to interactively explore the weather as it evolves. LEAD advances through the development and beta-deployment of Integrated Test Beds (ITBs), which are technology build-outs that are the fruition of collaborative IT and meteorological research. As the ITBs mature, opportunities emerge for the integration of this new technological capability into the education arena. The LEAD education and outreach initiative is aimed at bringing new capabilities into classroom from the middle school level to graduate education and beyond, and ensuring the congruency of this technology with curricular. One of the principal goals of LEAD is to democratize the availability of advanced weather technologies for research and education. The degree of democratization is tied to the growth of student knowledge and skills, and is correlated with education level (though not for every student in the same way). The average high school student may experience LEAD through an environment that retains a higher level of instructor control compared to the undergraduate and graduate student. This is necessary to accommodate not only differences in knowledge and skills, but the computer capabilities in the classroom such that the "teachable moment" is not lost.Undergraduates will have the opportunity to query observation data and model output, explore and discover relationships through concept mapping using an ontology service, select domains of interest based on current weather, and employ an experiment builder within the LEAD portal as an interface to configure, launch the WRF model, monitor the workflow, and visualize results using Unidata's Integrated Data Viewer (IDV), whether it be on a local server or across the TeraGrid. Such a robust and comprehensive suite of tools and services can create new paradigms for

  3. Building Technologies Program Multi-Year Program Plan Research and Development 2008

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2008-01-01

    Building Technologies Program Multi-Year Program Plan 2008 for research and development, including residential and commercial integration, lighting, HVAC and water heating, envelope, windows, and analysis tools.

  4. Theoretical and technological building blocks for an innovation accelerator

    Science.gov (United States)

    van Harmelen, F.; Kampis, G.; Börner, K.; van den Besselaar, P.; Schultes, E.; Goble, C.; Groth, P.; Mons, B.; Anderson, S.; Decker, S.; Hayes, C.; Buecheler, T.; Helbing, D.

    2012-11-01

    Modern science is a main driver of technological innovation. The efficiency of the scientific system is of key importance to ensure the competitiveness of a nation or region. However, the scientific system that we use today was devised centuries ago and is inadequate for our current ICT-based society: the peer review system encourages conservatism, journal publications are monolithic and slow, data is often not available to other scientists, and the independent validation of results is limited. The resulting scientific process is hence slow and sloppy. Building on the Innovation Accelerator paper by Helbing and Balietti [1], this paper takes the initial global vision and reviews the theoretical and technological building blocks that can be used for implementing an innovation (in first place: science) accelerator platform driven by re-imagining the science system. The envisioned platform would rest on four pillars: (i) Redesign the incentive scheme to reduce behavior such as conservatism, herding and hyping; (ii) Advance scientific publications by breaking up the monolithic paper unit and introducing other building blocks such as data, tools, experiment workflows, resources; (iii) Use machine readable semantics for publications, debate structures, provenance etc. in order to include the computer as a partner in the scientific process, and (iv) Build an online platform for collaboration, including a network of trust and reputation among the different types of stakeholders in the scientific system: scientists, educators, funding agencies, policy makers, students and industrial innovators among others. Any such improvements to the scientific system must support the entire scientific process (unlike current tools that chop up the scientific process into disconnected pieces), must facilitate and encourage collaboration and interdisciplinarity (again unlike current tools), must facilitate the inclusion of intelligent computing in the scientific process, must facilitate

  5. Application analysis of GPS technology used in health supervision%GPS技术在卫生监督执法中的应用分析

    Institute of Scientific and Technical Information of China (English)

    申国祥; 吴炫桢

    2012-01-01

    近几年卫生监督工作应用了GPS技术,对提高工作效率,提高快速执法能力,快速反应能力有较大的帮助作用;同时,对于卫生监督执法人员是否按时到达执法地点开展执法工作,在上级下达执法任务给有关人员后,单位运用GPS定位系统具有很好作用监控、监督全体用车人员利用公务车辆离开辖区内到外地去办私事,有制衡作用,这对提高卫生监督人员的整体形象具有十分重要意义。%GPS technology used in health supervision in recent years,is a great help for improving the work efficiency and rapid enforcement capahility,rapid response capability in the use of GPS,the same time,health supervision and law enforcement personnel on time the reach of law enforcement sites to carry out enforcement work in the higher authorities of law enforcement duties to the relevant staff,use of GPS positioning system unit has a good role in monitoring, supervision of all car use of official vehicles to leave the area to the field to personal affairs, there are checks and balances,which of great significance to improve the overall image of the health supervision personnel.

  6. Accelerating the green agenda through innovative building technologies

    CSIR Research Space (South Africa)

    Van Wyk, Llewellyn V

    2015-08-01

    Full Text Available of clinics, schools, and student residences. The aim of the study was to encourage innovation in the building industry as a means of accelerating green building. Green building rating systems include, as part of their objectives, demonstrating leadership...

  7. Discuss the Quality Supervision Management of Building Construction Engineering%关于房屋建筑工程质量监督管理的探讨

    Institute of Scientific and Technical Information of China (English)

    匡春芳

    2013-01-01

    How to grasp the construction quality supervision management count for much. In this article, the author engaged in the quality supervision management work for many years, t-alk about the views on engineering quality supervision work from the aspects of the quality management task, system and on-site supervision to provide reference for the majority of en-gineers.%如何抓好建筑工程质量监督管理关系重大。笔者从事质量监督管理工作多年,从质量管理的任务、制度及现场监督等方面谈一谈对工程质量监督工作的看法,以供广大工程技术人员参考。

  8. The Role of public agencies in fostering new technology and innovation in building

    National Research Council Canada - National Science Library

    Dibner, David R; Lemer, Andrew C

    1992-01-01

    ... AND INNOVATION IN BUILDING COMMITTEE ON NEW TECHNOLOGY AND INNOVATION IN BUILDING Building Research Board Commission on Engineering and Technical Systems National Research Council David R. Dibner Andrew C. Lemer Editors NATIONAL ACADEMY PRESS WASHINGTON, D.C. 1992 Copyrightoriginal retained, the be not from cannot book, paper original however, for version f...

  9. Technological options for and Chinese government regulation of building energy efficiency

    Institute of Scientific and Technical Information of China (English)

    FANYaming; LINZhenguo; FUXiangzhao

    2003-01-01

    Improvement of building energy efficiency, as a part of sustainable development strategies, makes great contribution to global environment protection and energy security. Presented in this paper are (i) a comprehensive overview of the technological options for building energy efficiency, (ii) government regulation of building energy efficiency, especially in China, (iii) some suggestions suitable for China.

  10. Remotely-Supervised Transcranial Direct Current Stimulation (tDCS for Clinical Trials: Guidelines for Technology and Protocols

    Directory of Open Access Journals (Sweden)

    Leigh E Charvet

    2015-03-01

    Full Text Available The effect of transcranial direct current stimulation (tDCS is cumulative. Treatment protocols typically require multiple consecutive sessions spanning weeks or months. However, traveling to clinic for a tDCS session can present an obstacle to subjects and their caregivers. With modified devices and headgear, tDCS treatment can be administered remotely under clinical supervision, potentially enhancing recruitment, throughput, and convenience. Here we propose standards and protocols for clinical trials utilizing remotely-supervised tDCS with the goal of providing safe, reproducible and well-tolerated stimulation therapy outside of the clinic. The recommendations include: 1 training of staff in tDCS treatment and supervision, 2 assessment of the user’s capability to participate in tDCS remotely, 3 ongoing training procedures and materials including assessments of the user and/or caregiver, 4 simple and fail-safe electrode preparation techniques and tDCS headgear, 5 strict dose control for each session, 6 ongoing monitoring to quantify compliance (device preparation, electrode saturation/placement, stimulation protocol, with corresponding corrective steps as required, 7 monitoring for treatment-emergent adverse effects, 8 guidelines for discontinuation of a session and/or study participation including emergency failsafe procedures tailored to the treatment population’s level of need. These guidelines are intended to provide a minimal level of methodological rigor for clinical trials seeking to apply tDCS outside a specialized treatment center. We outline indication-specific applications (Attention Deficit Hyperactivity Disorder, Depression, Multiple Sclerosis, Palliative Care following these recommendations that support a standardized framework for evaluating the tolerability and reproducibility of remote-supervised tDCS that, once established, will allow for translation of tDCS clinical trials to a greater size and range of patient populations.

  11. Complexities in building innovation systems : the case of radical medical technologies

    NARCIS (Netherlands)

    Kukk, P.

    2016-01-01

    The main goal of this thesis is to facilitate a further understanding of how firms behind innovative technologies deal with different complexities in system-building strategies and the co-dependencies among different technologies, actors and system-building activities, while contributing to the

  12. Complexities in building innovation systems : the case of radical medical technologies

    NARCIS (Netherlands)

    Kukk, P.

    2016-01-01

    The main goal of this thesis is to facilitate a further understanding of how firms behind innovative technologies deal with different complexities in system-building strategies and the co-dependencies among different technologies, actors and system-building activities, while contributing to the buil

  13. Low enthalpy geothermal energy: borehole heat exchangers (BHE. Geological and geothermal supervision during active construction in support of the energy certification of buildings - ESBE certification plan

    Directory of Open Access Journals (Sweden)

    Lorenzo Cadrobbi

    2012-12-01

    Full Text Available This article draws on the experience matured while working with low-enthalpy geothermic installations both in the design and executive phase as well as ongoing monitoring, within the scope of energy conservation as it relates to building and construction. The goal is to illustrate the feasibility of adopting the ESBE certification protocol (Certification of Energy Efficient Low-Enthalpy Probes aimed at optimizing the harnessing of local geothermic resources to satisfy the energy requirements of a building, measured against the initial investment. It is often the case, in fact, that during the course of a construction project for a given low-enthalpy installation, we verify incompa tibilities with the local geologic and geothermic models, which, if inadequate during construction, can compromise the proper functioning of the installation and its subsequent operation. To this end, the ESBE method, which adheres to the governing environmental regulations, and which takes its cue from technical statutes within the sector, permits us to validate via verification, simulations and tests, the geothermic field probes used in construction in an objective and standardized manner, thereby joining and supporting the most recent protocols for energy certification of buildings (LEED 2010, CASACLIMA 2011, UE 20120/31 Directive. ESBE certification operates through a dedicated Certifying Entity represented by the REET unit (Renewable Energies and Environmental Technologies of FBK (Bruno Kessler Foundation of Trento. The results obtained by applying the ESBE method to two concrete cases, relative to two complex geothermic systems, demonstrate how this protocol is able to guarantee, beyond the correct execution in the field of geothermic probes, an effective coverage of the energy requirements of the building during construction adopting the best optimization measures for the probes in keeping with the local geological and geothermic model.

  14. Optimal Technology Investment and Operation in Zero-Net-Energy Buildings with Demand Response

    OpenAIRE

    Stadler, Michael

    2009-01-01

    The US Department of Energy has launched the Zero-Net-Energy (ZNE) Commercial Building Initiative (CBI) in order to develop commercial buildings that produce as much energy as they use. Its objective is to make these buildings marketable by 2025 such that they minimize their energy use through cutting-edge energy-efficient technologies and meet their remaining energy needs through on-site renewable energy generation. We examine how such buildings may be implemented within the context of a cos...

  15. Orientation of Government’s Role in Building the Technology System of Circular Agriculture

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    This article expounds the economic characteristics of circular agricultural technology.Since the circular agricultural technology has characteristics and externality of public goods,the government participation is necessary in building the technology system of circular agriculture,in order to avoid "free rider" behavior in the consumption of public goods and internalize externality.We analyze the orientation of government’s role in building the technology system of circular agriculture:the government is the leader,designer,organizer and regulator in building the technology system of circular agriculture;the government orientates the four roles precisely in building the technology system of circular agriculture,to ensure that they do not cross the line,but be indispensable all the while.

  16. Simulation Technology of Environmental Impacts by Zero-energy Residential Buildings Based on Emergy Analysis Method

    Institute of Scientific and Technical Information of China (English)

    Hong Zhou; XiaoLong Xue; WangShu Yang

    2014-01-01

    This paper presents a simulation technology of environmental impact for the building. By emergy analysis method, emergy costs of building( or construction engineering) can be calculated in the life cycle. It includes the engineering cost, environmental cost and social cost of building. Through integrating GIS technology with multi-agent technology, life cycle substance and energy metabolism of building ( construction engineering) can be simulated and their environmental influence can be dynamically displayed. Based on the case study of entries works ‘Sunny Inside’ by Xiamen University in 2013 China International Solar Decathlon Competition, we discovered the changing pattern of surrounding environmental impact from waste streams of the zero-energy building and ordinary construction. The simulation results verified and showed the Odum principles of maximum power. This paper provides a new research perspective and integration approach for the environmental impact assessment in building and construction engineering. The result will help decision-making in design and construction engineering scheme.

  17. Ethics in education supervision

    Directory of Open Access Journals (Sweden)

    Fatma ÖZMEN

    2008-06-01

    Full Text Available Supervision in education plays a crucial role in attaining educational goals. In addition to determining the present situation, it has a theoretical and practical function regarding the actions to be taken in general and the achievement of teacher development in particular to meet the educational goals in the most effective way. For the education supervisors to act ethically in their tasks while achieving this vital mission shall facilitate them to build up trust, to enhance the level of collaboration and sharing, thus it shall contribute to organizational effectiveness. Ethics is an essential component of educational supervision. Yet, it demonstrates rather vague quality due to the conditions, persons, and situations. Therefore, it is a difficult process to develop the ethical standards in institutions. This study aims to clarify the concept of ethics, to bring up its importance, and to make recommendations for more effective supervisions from the aspect of ethics, based on the literature review, some research results, and sample cases reported by teachers and supervisors.

  18. Experiments in engagement: Designing public engagement with science and technology for capacity building.

    Science.gov (United States)

    Selin, Cynthia; Rawlings, Kelly Campbell; de Ridder-Vignone, Kathryn; Sadowski, Jathan; Altamirano Allende, Carlo; Gano, Gretchen; Davies, Sarah R; Guston, David H

    2017-08-01

    Public engagement with science and technology is now widely used in science policy and communication. Touted as a means of enhancing democratic discussion of science and technology, analysis of public engagement with science and technology has shown that it is often weakly tied to scientific governance. In this article, we suggest that the notion of capacity building might be a way of reframing the democratic potential of public engagement with science and technology activities. Drawing on literatures from public policy and administration, we outline how public engagement with science and technology might build citizen capacity, before using the notion of capacity building to develop five principles for the design of public engagement with science and technology. We demonstrate the use of these principles through a discussion of the development and realization of the pilot for a large-scale public engagement with science and technology activity, the Futurescape City Tours, which was carried out in Arizona in 2012.

  19. Social networks in supervision

    DEFF Research Database (Denmark)

    Lystbæk, Christian Tang

    and practice have focused on conceptual frameworks and practical techniques of promoting reflection through conversation in general and questioning in particular. However, in recent years, supervision research has started to focus on the social and technological aspects of supervision. This calls...... is constituted by the relationality of the actors, not by the actors themselves. In other words, no one acts in a vacuum but rather always under the influence of a wide range of surrounding and interconnected factors. Actors are actors because they are in a networked relationship. Thus, focusing on social...... and space. That involves mobilised an denrolled actos, both animate and inanimate (e.g. books, computers, etc. Actor-network theory defines a symmetry between animate and inanimate, i.e. subjects and objects, because ”human powers increasingly derive from the complex interconnections if human with material...

  20. Green Building Retrofit for the Library of Indian Institute Technology, Roorkee

    Science.gov (United States)

    Naphade, A.; Sharma, A.; Chani, P. S.; Garg, P.

    2013-03-01

    The major focus world over is on constructing environment friendly buildings. Buildings symbolize uncontrolled consumption of energy and natural resources and also have negative environmental impact. In India, the residential and commercial sector consumes 30 % of the total electricity usage of the country and a major portion of this is used in buildings. Designing and developing new buildings based on the energy efficiency concept and applying retrofit options to the existing buildings could improve the energy use in the building sector. This paper studies an existing building, Central Library of Indian Institute of Technology Roorkee, and recommends retrofit options for sustainable aspects such as site planning, energy and water use, materials and resources and indoor environment quality. The results of this study can be utilized for green retrofits of the other buildings in the campus.

  1. Appendix E: New Building Technology and Innovation: A Selective Review

    National Research Council Canada - National Science Library

    2017-01-01

    This book explores innovation in the U.S. construction-related industries (i.e., design services, construction, building materials and products manufacture, and facilities operation and maintenance...

  2. Solar Energy Windows and Smart IR Switchable Building Technologies

    Energy Technology Data Exchange (ETDEWEB)

    McCarny, James; Kornish, Brian

    2011-09-30

    The three building envelope functions with the largest impact on the energy usage are illumination, energy flux and energy production. In general, these three functions are addressed separately in the building design. A step change toward a zero-energy building can be achieved with a glazing system that combines these three functions and their control into a single unit. In particular, significant value could be realized if illumination into the building is dynamically controlled such that it occurs during periods of low load on the grid (e.g., morning) to augment illumination supplied by interior lights and then to have that same light diverted to PV energy production and the thermal energy rejected during periods of high load on the grid. The objective of this project is to investigate the feasibility of a glazing unit design that integrates these three key functions (illumination and energy flux control, and power production) into a single module.

  3. Demand Responsive and Energy Efficient Control Technologies andStrategies in Commercial Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Piette, Mary Ann; Kiliccote, Sila

    2006-09-01

    Commercial buildings account for a large portion of summer peak electric demand. Research results show that there is significant potential to reduce peak demand in commercial buildings through advanced control technologies and strategies. However, a better understanding of commercial buildings contribution to peak demand and the use of energy management and control systems is required to develop this demand response resource to its full potential. The main objectives of the study were: (1) To evaluate the size of contributions of peak demand commercial buildings in the U.S.; (2) To understand how commercial building control systems support energy efficiency and DR; and (3) To disseminate the results to the building owners, facility managers and building controls industry. In order to estimate the commercial buildings contribution to peak demand, two sources of data are used: (1) Commercial Building Energy Consumption Survey (CBECS) and (2) National Energy Modeling System (NEMS). These two sources indicate that commercial buildings noncoincidental peak demand is about 330GW. The project then focused on technologies and strategies that deliver energy efficiency and also target 5-10% of this peak. Based on a building operations perspective, a demand-side management framework with three main features: (1) daily energy efficiency, (2) daily peak load management and (3) dynamic, event-driven DR are outlined. A general description of DR, its benefits, and nationwide DR potential in commercial buildings are presented. Case studies involving these technologies and strategies are described. The findings of this project are shared with building owners, building controls industry, researchers and government entities through a webcast and their input is requested. Their input is presented in the appendix section of this report.

  4. Building technology. Renewable energies, building automation, energy efficiency; Gebaeudetechnik. Erneuerbare Energien, Gebaeudeautomation, Energieeffizienz

    Energy Technology Data Exchange (ETDEWEB)

    Veit, Joerg; Schmidt, Peer (eds.)

    2012-07-01

    The functionality and efficiency of a building significantly are influenced by the installations of technical building equipment and especially by the building automation. Under this aspect, the authors of the book under consideration report on new ideas for an enhanced energy efficiency. At first, important regulations and laws (Renewable Energy Law, Act for the Retention, Modernisation and Expansion of Combined Heat and Power) are presented. In the chapter on renewable energies, the authors specifically address photovoltaic systems. Other features of this book are building automation, energy efficiency, operational and project management. The last chapter of this book presents an overview of trade fairs and events as well as training centres of the Zentralverband der Deutschen Elektro- und Informationstechnischen Handwerke (Frankfurt (Main), Federal Republic of Germany) and of the national associations.

  5. Building

    OpenAIRE

    Seavy, Ryan

    2014-01-01

    Building for concrete is temporary. The building of wood and steel stands against the concrete to give form and then gives way, leaving a trace of its existence behind. Concrete is not a building material. One does not build with concrete. One builds for concrete. MARCH

  6. Technical Support Document: 50% Energy Savings Design Technology Packages for Highway Lodging Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Wei; Gowri, Krishnan; Lane, Michael D.; Thornton, Brian A.; Rosenberg, Michael I.; Liu, Bing

    2009-09-28

    This Technical Support Document (TSD) describes the process, methodology and assumptions for development of the 50% Energy Savings Design Technology Packages for Highway Lodging Buildings, a design guidance document intended to provide recommendations for achieving 50% energy savings in highway lodging properties over the energy-efficiency levels contained in ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings.

  7. Building Thermal Envelope Systems and Materials (BTESM) and research utilization/technology transfer

    Energy Technology Data Exchange (ETDEWEB)

    Burn, G. (comp.)

    1990-07-01

    The Monthly Report of the Building Thermal Envelope Systems and Materials (BTESM) Programs is a monthly update of both in-house ORNL projects and subcontract activities in the research areas of building materials, wall systems, foundations, roofs, building diagnostics, and research utilization and technology transfer. Presentations are not stand-alone paragraphs every month. Their principal values are the short-time lapse between accomplishment and reporting and their evolution over a period of several months..

  8. Building Technologies Program Multi-Year Program Plan Program Overview 2008

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2008-01-01

    Building Technologies Program Multi-Year Program Plan Program Overview 2008, including market overview and federal role, program vision, mission, design and structure, and goals and multi-year targets.

  9. Building Technologies Program Multi-Year Program Plan Program Portfolio Management 2008

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2008-01-01

    Building Technologies Program Multi-Year Program Plan 2008 for program portfolio management, including the program portfolio management process, program analysis, performance assessment, stakeholder interactions, and cross-cutting issues.

  10. Observations from the fire and collapse of the Faculty of Architecture Building, Delft University of Technology

    NARCIS (Netherlands)

    Engelhardt, M.D.; Meacham, B.; Kodur, V.; Kirk, A.; Park, H.; Straalen, IJ.J. van; Maljaars, J.; Weeren, K. van; Feijter, R. de; Both, K.

    2013-01-01

    On May 13, 2008, a fire occurred at the Faculty of Architecture Building at the Delft University of Technology (TUD) in the Netherlands. The fire ultimately led to the collapse of a major portion of the building. Data was collected on this fire event by an international team that included

  11. Fire and collapse, Faculty of Architecture building, Delft University of Technology: Data collection and preliminary analyses

    NARCIS (Netherlands)

    Meacham, B.; Park, H.; Engelhardt, M.; Kirk, A.; Kodur, V.; Straalen, IJ.J.; Maljaars, J.; Weeren, K. van; Feijter, R. de; Both, K.

    2010-01-01

    On the morning of May 13, 2008, a fire that started in a coffee vending machine on the 6th floor of the 13-story Faculty of Architecture Building at the Delft University of Technology (TUD), Delft, the Netherlands, quickly developed into an extreme loading event. Although all building occupants evac

  12. Building America Case Study: Field Trial of an Aerosol-Based Enclosure Sealing Technology, Clovis, California

    Energy Technology Data Exchange (ETDEWEB)

    2016-05-01

    This report presents the results from several demonstrations of a new method for sealing building envelope air leaks using an aerosol sealing process developed by the Western Cooling Efficiency Center at UC Davis. The process involves pressurizing a building while applying an aerosol sealant to the interior. As air escapes through leaks in the building envelope, the aerosol particles are transported to the leaks where they collect and form a seal that blocks the leak. Standard blower door technology is used to facilitate the building pressurization, which allows the installer to track the sealing progress during the installation and automatically verify the final building tightness. Each aerosol envelope sealing installation was performed after drywall was installed and taped, and the process did not appear to interrupt the construction schedule or interfere with other trades working in the homes. The labor needed to physically seal bulk air leaks in typical construction will not be replaced by this technology. However, this technology is capable of bringing the air leakage of a building that was built with standard construction techniques and HERS-verified sealing down to levels that would meet DOE Zero Energy Ready Homes program requirements. When a developer is striving to meet a tighter envelope leakage specification, this technology could greatly reduce the cost to achieve that goal by providing a simple and relatively low cost method for reducing the air leakage of a building envelope with little to no change in their common building practices.

  13. 78 FR 34347 - Proposed Information Collection; Comment Request; the Building Construction Technology Extension...

    Science.gov (United States)

    2013-06-07

    ... collection. Sponsored by the National Institute of Standards and Technology (NIST), the Manufacturing...-tuning. Re-tuning is a systematic semi-automated process of identifying operational problems in commercial and industrial buildings. It leverages data collected from the building automation system...

  14. Fire and collapse, Faculty of Architecture building, Delft University of Technology: Data collection and preliminary analyses

    NARCIS (Netherlands)

    Meacham, B.; Park, H.; Engelhardt, M.; Kirk, A.; Kodur, V.; Straalen, IJ.J.; Maljaars, J.; Weeren, K. van; Feijter, R. de; Both, K.

    2010-01-01

    On the morning of May 13, 2008, a fire that started in a coffee vending machine on the 6th floor of the 13-story Faculty of Architecture Building at the Delft University of Technology (TUD), Delft, the Netherlands, quickly developed into an extreme loading event. Although all building occupants

  15. Multi-energy systems applied to the building sector (Heat Pump Technology)

    OpenAIRE

    Lorenzo Izquierdo, Marta

    2008-01-01

    The project deals with the study of multi-energy systems applied to the building sector. Nowadays, this thematic is very important because the use of systems integrating different energy sources and energy technologies is a key element in the design of low emission buildings. In particular, the project focuses on heat pump technologies. In the first part of the project an over view of the status of the heat pump development is investigated. Then, a numerical model to simulat...

  16. Building Technologies Program Budget Request: Fiscal Year 2012

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2011-02-01

    Details about BTP's budget request for FY2012. BTP’s FY 2012 activities reflect a significant shift by EERE in budget development of incorporating analytically based integrated planning, review, and performance assessment of its programs. BTP’s FY 2012 portfolio will achieve rapid gains in the efficient use of buildings energy through a balanced set of strategies.

  17. Building Computer Technology Skills in TESOL Teacher Education

    Science.gov (United States)

    DelliCarpini, Margo

    2012-01-01

    This paper reports on an action research study that investigated factors influencing TESOL (teaching English to speakers of other languages) teacher candidates' (TCs) selection and use of technology in the English as a second language (ESL) classroom and the influence of explicit training in context in the use of computer technology for second…

  18. New Technology's Surprising Security Threats. Building Digital Libraries

    Science.gov (United States)

    Huwe, Terence

    2005-01-01

    In recent years, security issues have increasingly come to dominate the technological development process--although still in a more reactive than proactive mode. It now seems more important than ever to monitor security trends and policy developments, especially if technology is regarded as a potential community builder. This article suggests…

  19. Guidelines for clinical supervision in health service psychology.

    Science.gov (United States)

    2015-01-01

    This document outlines guidelines for supervision of students in health service psychology education and training programs. The goal was to capture optimal performance expectations for psychologists who supervise. It is based on the premises that supervisors (a) strive to achieve competence in the provision of supervision and (b) employ a competency-based, meta-theoretical approach to the supervision process. The Guidelines on Supervision were developed as a resource to inform education and training regarding the implementation of competency-based supervision. The Guidelines on Supervision build on the robust literatures on competency-based education and clinical supervision. They are organized around seven domains: supervisor competence; diversity; relationships; professionalism; assessment/evaluation/feedback; problems of professional competence, and ethical, legal, and regulatory considerations. The Guidelines on Supervision represent the collective effort of a task force convened by the American Psychological Association (APA) Board of Educational Affairs (BEA). PsycINFO Database Record (c) 2015 APA, all rights reserved.

  20. Y-12 Plant decontamination and decommissioning technology logic diagram for Building 9201-4. Volume 2: Technology logic diagram

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    The Y-12 Plant Decontamination and Decommissioning Technology Logic Diagram for Building 9201-4 (TLD) was developed to provide a decision-support tool that relates decontamination and decommissioning (D and D) problems at Bldg. 9201-4 to potential technologies that can remediate these problems. This TLD identifies the research, development, demonstration, testing, and evaluation needed for sufficient development of these technologies to allow for technology transfer and application to D and D and waste management (WM) activities. It is essential that follow-on engineering studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologies identified in the TLD and by finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk. The TLD consists of three fundamentally separate volumes: Vol. 1 (Technology Evaluation), Vol. 2 (Technology Logic Diagram), and Vol. 3 (Technology Evaluation Data Sheets). Volume 2 contains the logic linkages among environmental management goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 2 has been divided into five sections: Characterization, Decontamination, Dismantlement, Robotics/Automation, and Waste Management. Each section contains logical breakdowns of the Y-12 D and D problems by subject area and identifies technologies that can be reasonably applied to each D and D challenge.

  1. Buildings sector demand-side efficiency technology summaries

    Energy Technology Data Exchange (ETDEWEB)

    Koomey, J.G.; Johnson, F.X.; Schuman, J. [and others

    1994-03-01

    This report provides descriptions of the following energy efficiency technologies: energy management systems; electronic fluorescent ballasts; compact fluorescent lamps; lighting controls; room air conditioners; high albedo materials, coatings and paints; solar domestic water heaters; heat pump water heaters; energy-efficient motors; adjustable-speed drives; energy-efficient refrigerators; daylight control glazing; insulating glazing; solar control glazing; switchable glazing; tree planting; and advanced insulation. For each technology, the report provides a description of performance characteristics, consumer utility, development status, technology standards, equipment cost, installation, maintenance, conservation programs, and environmental impacts.

  2. Building the Digital Branch A Library Technology Report

    CERN Document Server

    King, David Lee

    2009-01-01

    This issue of Library Technology Reports explores the idea of the digital branch-a library website that is a vital, functional resource for patrons and enhances the library's place within its community.

  3. Automation and information technology solutions for buildings and homes

    OpenAIRE

    Cuacos Encarnación, David

    2008-01-01

    This investigation is part of Master’s of Science degree in Industrial Engineering at the Universidad Carlos III of Madrid. The work has been carried out at Automation Technology Laboratory, of Helsinki University of Technology (TKK). This research is part of Assistive Automation project, which develops devices and systems assist independent living of elderly and disabled persons. The home automation system prototype is expected to increase the safety, comfort and independence of these people...

  4. Hand in Glove? Small Building Contractors, Mobile Technology and Innovation

    DEFF Research Database (Denmark)

    Buser, Martine; Koch, Christian; Tambo, Torben

    2010-01-01

    and wireless communication; prices of powerful laptops, pocketpc, smart phones, blackberry's and PDA's continue to drop and their functionality approaches the computing power of laptops. Moreover those generic technologies have become commonly used. By the end of 2005, there were more mobile phones in use...... developed rapidly, it possess features fitting the mobility patterns of the small craftsmen enterprises operating on construction sites. The new options of mobile computing encompass telecommunication, devices, IT-architecture and: Telecommunication such as cellular phone communication technologies...

  5. Scout: An Impact Analysis Tool for Building Energy-Efficiency Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Harris, Chioke; Langevin, Jared; Roth, Amir; Phelan, Patrick; Parker, Andrew; Ball, Brian; Brackney, Larry

    2016-08-26

    Evaluating the national impacts of candidate U.S. building energy-efficiency technologies has historically been difficult for organizations with large energy efficiency portfolios. In particular, normalizing results from technology-specific impact studies is time-consuming when those studies do not use comparable assumptions about the underlying building stock. To equitably evaluate its technology research, development, and deployment portfolio, the U.S. Department of Energy's Building Technologies Office has developed Scout, a software tool that quantitatively assesses the energy and CO2 impacts of building energy-efficiency measures on the national building stock. Scout efficiency measures improve upon the unit performance and/or lifetime operational costs of an equipment stock baseline that is determined from the U.S. Energy Information Administration Annual Energy Outlook (AEO). Scout measures are characterized by a market entry and exit year, unit performance level, cost, and lifetime. To evaluate measures on a consistent basis, Scout uses EnergyPlus simulation on prototype building models to translate measure performance specifications to whole-building energy savings; these savings impacts are then extended to a national scale using floor area weighting factors. Scout represents evolution in the building stock over time using AEO projections for new construction, retrofit, and equipment replacements, and competes technologies within market segments under multiple adoption scenarios. Scout and its efficiency measures are open-source, as is the EnergyPlus whole building simulation framework that is used to evaluate measure performance. The program is currently under active development and will be formally released once an initial set of measures has been analyzed and reviewed.

  6. From the Schoolhouse to the Statehouse: Building a Statewide Model for Technology Education

    Science.gov (United States)

    Rhine, Luke

    2013-01-01

    This article details the journey Luke Rhine, a Program Specialist in Career and Technology Education at the Maryland State Department of Education, as he went about the difficult task of building consistency and establishing rigorous expectations for Technology education in Maryland. As a result, Maryland has developed a model for Technology…

  7. Building the digital enterprise a guide to constructing monetization models using digital technologies

    CERN Document Server

    Skilton, Mark

    2015-01-01

    The digital economy is at a tipping point. This practical book defines digital ecosystems, discusses digital design using converging technologies of social networking, mobility, big data and cloud computing, and provides a methods for linking digital technologies together to meet the challenges of building a digital enterprise in the new economy.

  8. Empirical study of supervised gene screening

    Directory of Open Access Journals (Sweden)

    Ma Shuangge

    2006-12-01

    Full Text Available Abstract Background Microarray studies provide a way of linking variations of phenotypes with their genetic causations. Constructing predictive models using high dimensional microarray measurements usually consists of three steps: (1 unsupervised gene screening; (2 supervised gene screening; and (3 statistical model building. Supervised gene screening based on marginal gene ranking is commonly used to reduce the number of genes in the model building. Various simple statistics, such as t-statistic or signal to noise ratio, have been used to rank genes in the supervised screening. Despite of its extensive usage, statistical study of supervised gene screening remains scarce. Our study is partly motivated by the differences in gene discovery results caused by using different supervised gene screening methods. Results We investigate concordance and reproducibility of supervised gene screening based on eight commonly used marginal statistics. Concordance is assessed by the relative fractions of overlaps between top ranked genes screened using different marginal statistics. We propose a Bootstrap Reproducibility Index, which measures reproducibility of individual genes under the supervised screening. Empirical studies are based on four public microarray data. We consider the cases where the top 20%, 40% and 60% genes are screened. Conclusion From a gene discovery point of view, the effect of supervised gene screening based on different marginal statistics cannot be ignored. Empirical studies show that (1 genes passed different supervised screenings may be considerably different; (2 concordance may vary, depending on the underlying data structure and percentage of selected genes; (3 evaluated with the Bootstrap Reproducibility Index, genes passed supervised screenings are only moderately reproducible; and (4 concordance cannot be improved by supervised screening based on reproducibility.

  9. Windows and Building Envelope Research and Development: A Roadmap for Emerging Technologies

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2014-02-01

    This Building Technologies Office (BTO) Research and Development (R&D) Roadmap identifies priority windows and building envelope R&D areas of interest. Cost and performance targets are identified for each key R&D area. The roadmap describes the technical and market challenges to be overcome, R&D activities and milestones, key stakeholders, and potential energy savings that could result if cost and performance targets are met. Methods for improving technology performance and specific strategies for reducing installed costs and mitigating any other market barriers, which would increase the likelihood of mass-market technology adoption, are identified. This roadmap is a useful resource for public and private decision makers evaluating and pursuing high-impact R&D focused on advancing next-generation energy efficient windows and building envelope technologies.

  10. Building Science and Technology Solutions for National Problems

    Energy Technology Data Exchange (ETDEWEB)

    Bishop, Alan R. [Los Alamos National Laboratory

    2012-06-05

    The nation's investment in Los Alamos has fostered scientific capabilities for national security missions. As the premier national security science laboratory, Los Alamos tackles: (1) Multidisciplinary science, technology, and engineering challenges; (2) Problems demanding unique experimental and computational facilities; and (3) Highly complex national security issues requiring fundamental breakthroughs. Our mission as a DOE national security science laboratory is to develop and apply science, technology, and engineering solutions that: (1) ensure the safety, security, and reliability of the US nuclear deterrent; (2) protect against the nuclear threat; and (3) solve national security challenges.

  11. Solar technology and building implementation in Malaysia: A national paradigm shift

    Directory of Open Access Journals (Sweden)

    Syahrul Nizam Kamaruzzaman

    2012-05-01

    Full Text Available Solar technology is becoming increasingly popular. For example, the production of solarcells quadrupled in the 1999-2004 period, with a capacity of four gigawatts worldwide. Renewableenergy including solar power produces few or no harmful emissions and it is becoming increasinglyimportant to exploit it in the future. This paper presents a literature review of the application ofnumerous types of solar technology in buildings in Malaysia and identifies the challenges faced.Although several newly constructed green buildings use solar technology, Malaysia has yet to acceptit wholesale. If solar technology is to be adopted widely, then both public and private sectors mustcooperate to provide large-scale financial incentives and produce specialists in solar technology. Asthe first step, the government has established the Low Energy Office and the Green Energy Office,which use passive solar design and photovoltaic systems in their own buildings. However, the privatesector has yet to follow suit. It is anticipated that the application of solar technology in buildings willencourage sustainable development when all non-renewable energy sources decrease significantly. Ifpeople do not recognise the potential of such technology in daily life, it will soon be too late.

  12. Building a Science, Technology, Engineering, and Math Agenda

    Science.gov (United States)

    Toulmin, Charles N.; Groome, Meghan

    2007-01-01

    The global economy has "flattened" the world in terms of skills and technology. A new workforce of problem-solvers, innovators, and inventors who are self-reliant and able to think logically is one of the critical foundations that drive innovative capacity in a state. The K-12 (kindergarten through grade 12) education system, with the…

  13. Building Technology Transfer Capacity in Turkish Universities: A Critical Analysis

    Science.gov (United States)

    Ranga, Marina; Temel, Serdal; Ar, Ilker Murat; Yesilay, Rustem Baris; Sukan, Fazilet Vardar

    2016-01-01

    University technology transfer has been receiving significant government funding since 2012. Results of this major investment are now expected by the Turkish government and society, not only in terms of better teaching and research performance, but also of new jobs, new products and services, enhanced regional development and contribution to…

  14. 78 FR 69839 - Building Technologies Office Prioritization Tool

    Science.gov (United States)

    2013-11-21

    ... as methodology, comparing long-term benefits and end-user costs applied to various markets, end-uses... than 100 TBtu in the year 2030); Involved fuel switching (unless the analysis team deemed a technology... analysis team; Were already included in the Annual Energy Outlook (AEO) 2010 baseline, which takes...

  15. The Psychologist's Role in Family Building with Reproductive Technology.

    Science.gov (United States)

    Mikesell, Susan G.

    About 1 in 12 couples in the United States face the "how to have" element of reproductive choices. Assistive Reproductive Technology (ART) involves manipulation of genetic material outside of the body. Infertile couples have a large range of options in the achievement of a conception and are easily overwhelmed. As new choices are offered to…

  16. Building Virtual Teams: Experiential Learning Using Emerging Technologies

    Science.gov (United States)

    Hu, Haihong

    2015-01-01

    Currently, virtual teams are being used exponentially in higher education and business because of the development of technologies and globalization. These teams have become an essential approach for collaborative learning as well as task completion. Team learning, especially in an online format, can be challenging due to lack of effective…

  17. Electricity and the environment: Building partnerships through technology

    Energy Technology Data Exchange (ETDEWEB)

    Yeager, K.E.; Torrens, I. [Electric Power Research Institute, Palo Alto, CA (United States)

    1995-12-01

    The vision for electricity in the world today transcends its role as just an energy medium and focuses on its ability to furnish ever greater productivity of labor, capital and primary energy resources. Its efficiency and precision, through innovative technology, have become essential assets for resolving the interrelated economic, environmental and energy security issues facing the world. As a result, electricity has become a major differentiating factor in the global economy. For example, the fraction of all primary energy converted to electricity is typically used as a rough indication of regional prosperity. This index reflects the importance of electricity in both creating and harvesting technological innovation. Electricity`s advantages in focusing and amplifying physical power during the first century are being complemented in the second by its even greater advantages for focusing and amplifying the power of knowledge. As its importance grows, electricity will likely expand in the next half-century to provide over half the world`s energy demands while providing the means for the most effective conservation of natural resources. Collaborative R&D organizations such as EPRI are acting as new catalysts and partners to transfer technology on a world-wide basis. With respect to Central and Eastern Europe, this effort focuses on new, more cost-effective innovations for the generation and delivery of electricity because obsolete and inefficient technology is contrary to our mutual interest in achieving efficient and sustainable economic development. EPRI stands ready to assist in this international endeavor.

  18. Organizational and technological factors influence on the efficiency of building management

    Directory of Open Access Journals (Sweden)

    G.I. Abdullaev

    2011-03-01

    Full Text Available Influence of organizational and technological factors on management efficiency can be considered on the elements of system of the organization and technology of building. Organizational and technological factors substantially cause level of organizational-technological reliability of building manufacture, and their level, in turn, depends on work quality of a control system. Regulation and management of building on the basis of organizational-technological decisions includes change of technological schemes of execution phase and erection of constructions, redistribution of labor and technical resources, change of sequence of development of particular work fronts, change of methods of work organization. It leads to changes of values of organizational-technological parameters and, hence, change of the sizes of financial expenses. Development of the operating decision should provide minimization of deviation from the size of planned financial expenses and with it to provide the efficiency of operating system. The primary goal of the operating decision is preservation of the basic planned targets at the minimum increase in financial expenses. In the article the calculation of functioning efficiency of the management system against a background of organizational and technological parameters of construction is given. This calculation makes it possible to select the most rational parameters of organization and technology of construction.

  19. Building Efficiency Technologies by Tomorrow’s Engineers and Researchers (BETTER) Capstone Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Yee, Shannon

    2017-09-30

    BETTER Capstone supported 29 student project teams consisting of 155 students over two years in developing transformative building energy efficiency technologies through a capstone design experience. Capstone is the culmination of an undergraduate student’s engineering education. Interdisciplinary teams of students spent a semester designing and prototyping a technological solution for a variety building energy efficiency problems. During this experience students utilized the full design process, including the manufacturing and testing of a prototype solution, as well as publically demonstrating the solution at the Capstone Design Expo. As part of this project, students explored modern manufacturing techniques and gained hands-on experience with these techniques to produce their prototype technologies. This research added to the understanding of the challenges within building technology education and engagement with industry. One goal of the project was to help break the chicken-and-egg problem with getting students to engage more deeply with the building technology industry. It was learned however that this industry is less interested in trying innovative new concept but rather interested in hiring graduates for existing conventional building efforts. While none of the projects yielded commercial success, much individual student growth and learning was accomplished, which is a long-term benefit to the public at large.

  20. Lipid Processing Technology: Building a Multilevel Modeling Network

    DEFF Research Database (Denmark)

    Diaz Tovar, Carlos Axel; Mustaffa, Azizul Azri; Hukkerikar, Amol

    of these unit operations with respect to performance parameters such as minimum total cost, product yield improvement, operability etc., and process intensification for the retrofit of existing biofuel plants. In the fourth level the information and models developed are used as building blocks...... in the upcoming years major challenges in terms of design and development of better products and more sustainable processes. Although the oleo chemical industry is mature and based on well established processes, the complex systems that lipid compounds form, the lack of accurate predictive models...... for their physical properties and unit operation models for their processing have limited computeraided methods and tools for process synthesis, modeling and simulation to be widely used for design, analysis, and optimization of these processes. In consequence, the aim of this work is to present the development...

  1. Practical aspects of the technical and technological development level determining the machine-building enterprise

    Directory of Open Access Journals (Sweden)

    O.G. Shevliuga

    2014-09-01

    Full Text Available The aim of the article. The aim of the article is to determine the technical-technological development level of the machine-building enterprise on the basis of the proposed methodological approach. The results of the analysis. Low innovation activity of enterprises creates opportunities for improving many of its aspects. The technical-technological development is an essential part of modern enterprise innovation activity, which is an important component of successful functioning of enterprises. However, the question of finding funding sources for implementation of innovative changes remains open. Therefore it is necessary to involve different sources of funding to carry out the changes The proposed research and methodical recommendations facilitate application of scientific foundations for calculating the technical-technological development level in practice. The approach is aimed at the efficient use of existing fixed assets and introduction of technological innovations. The technical and technological components of the technical-technological development of machine-building enterprise “Turbomash Ltd” are examined in the article. The determination of its level allows defining the enterprise position in a competitive environment. The partial indicators of technical and technological TTD components during the period of 2009-2013 years are used in the calculation. On the basis of partial indicators for the technical and technological components integrated indicators are calculated. With the help of expert estimations weight characteristics of partial indicators are determined. Conclusions and directions of futher researches. According to the calculation results analyzed enterprise is positioned in the two-dimensional matrix based on integral indicators for the technical and technological components. Recommendations concerning measures of increasing the technical-technological development level of the enterprise are offered. For its increasing

  2. Building technology transfer within research universities an entrepreneurial approach

    CERN Document Server

    O'Shea, Rory P

    2014-01-01

    For the past number of years, academic entrepreneurship has become one of the most widely studied topics in the entrepreneurship literature. Yet, despite all the research that has been conducted to date, there has not been a systematic attempt to analyze critically the factors which lie behind successful business spin-offs from university research. In this book, a group of academic thought-leaders in the field of technology transfer examine a number of areas critical to the promotion of start-ups on campus. Through a series of case studies, they examine current policies, structures, program initiatives and practices of fourteen international universities to develop a theory of successful academic entrepreneurship, with the aim of helping other universities to enhance the quality of their university transfer programs. This book is a valuable resource for researchers and graduate students working on innovation, entrepreneurship and technology transfer, as well as senior managers and policymakers.

  3. Building technology entrepreneurship capabilities, an engineering education perspective

    DEFF Research Database (Denmark)

    Kleine, Kari; Giones, Ferran; Tegtmeier, Silke

    and to their integration processes with the regional actors. A comparative analysis of the two cases provides insights on potential guidelines to structure programs that foster technology entrepreneurship through education and training. Both programs, one at Lorraine University (UL) in France and the other at University...... of the often-abstract entrepreneurship process. The intense use of these facilities in the educational programs aim to modify the self-efficacy perception of the students regarding the entrepreneurial behavior. The aim of this paper is to provide illustrative examples that can be used as a guide to propose...... to respond to the divergence between the new demands imposed by the societal challenges and the existing science and technology development focus of universities is to transform the educational programs being offered. Instead of aiming to transform consolidated structures through directed interventions...

  4. Learning Dynamics in Doctoral Supervision

    DEFF Research Database (Denmark)

    Kobayashi, Sofie

    This doctoral research explores doctoral supervision within life science research in a Danish university. From one angle it investigates doctoral students’ experiences with strengthening the relationship with their supervisors through a structured meeting with the supervisor, prepared as part...... of an introduction course for new doctoral students. This study showed how the course provides an effective way build supervisee agency and strengthening supervisory relationships through clarification and alignment of expectations and sharing goals about doctoral studies. From the other angle the research...

  5. Enhancements of G3-PLC Technology for Smart-Home/Building Applications

    OpenAIRE

    Luca Di Bert; Salvatore D'Alessandro; Tonello, Andrea M.

    2013-01-01

    To enable the smart grid concept, it is fundamental to consider the in-home/building context where, beside the conventional home networking services, home automation and smart energy management services have to be offered. In this paper, we consider the in-home/building scenario, for which we propose a convergent network architecture to enhance the performance of the narrowband power line communication (PLC) G3-PLC technology through its integration with an Ethernet-based network....

  6. Promotion of Sustainable Buildings in China- Integration of Bamboo and Renewable Energy Technologies

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    WWF China and the International Network for Bamboo and Rattan (INB AR) jointly launched the project "Promotion of Energy Efficient Buildings: Integration of Bamboo and Renewable Energy Technologies" together with the Urban & Rural Planning & Design Institute of Yunnan and BEAR Architecten Gouda (Holland) in March 2002. The objective of the project is to design model houses, hotels and school buildings for rural people in Yuanan Province to provide 'comfortable' living conditions with a minimum and meani...

  7. Use of Advanced Plastic Materials in Nigeria: Performance Assessment of Expanded Polystyrene Building Technology System

    Directory of Open Access Journals (Sweden)

    Anthony Nkem Ede (PhD

    2016-08-01

    Full Text Available The provision of affordable residential houses for the masses in the developing nations has been a mirage over the years and the future does not portend good as the cost of adopting conventional concrete material technologies is escalating while so many environmental issues like climate change are being raised in the recent times.To circumvent this poor housing provision trend, some innovative construction materials and technologies are being introduced to facilitate unique modular designs, reduction of labour, decline in the depletion of exhaustible materials,savings of time and fund. One of such materials is the expanded polystyrene. The introduction of advanced plastic materials and in particular the expanded polystyrene building technologies in the Nigerian constructionindustry will be a very useful and brilliant initiative that will aid the reduction of cost of construction and facilitate access to affordable houses for the masses.This researchaims at studying the applications of this innovative plastic material in the Nigerian building industry with special regard to the performance perception by the clients and the end users. A building estate where expanded polystyrene building technology has been predominantly used in Abuja is considered as a case study. Questionnaires were distributed among clients and residents of the building estate and statistical tools were used to analyse the data collected. Great satisfaction verified among the clients and residents and the high ranking performance confirmed for recyclability, reliability, versatility and moisture resistance of EPS building products all herald a great future for the applications of this advanced building products in the Nigerian building industry.

  8. Analyzing the Life Cycle Energy Savings of DOE Supported Buildings Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Cort, Katherine A.; Hostick, Donna J.; Dirks, James A.; Elliott, Douglas B.

    2009-08-31

    This report examines the factors that would potentially help determine an appropriate analytical timeframe for measuring the U.S. Department of Energy's Building Technology (BT) benefits and presents a summary-level analysis of the life cycle savings for BT’s Commercial Buildings Integration (CBI) R&D program. The energy savings for three hypothetical building designs are projected over a 100-year period using Building Energy Analysis and Modeling System (BEAMS) to illustrate the resulting energy and carbon savings associated with the hypothetical aging buildings. The report identifies the tasks required to develop a long-term analytical and modeling framework, and discusses the potential analytical gains and losses by extending an analysis into the “long-term.”

  9. Modernity in tradition: Reflections on building design and technology in the Asian vernacular

    Directory of Open Access Journals (Sweden)

    Mamun Rashid

    2015-03-01

    Full Text Available Vernacular buildings across the globe provide instructive examples of sustainable solutions to building problems. Yet, these solutions are assumed to be inapplicable to modern buildings. Despite some views to the contrary, there continues to be a tendency to consider innovative building technology as the hallmark of modern architecture because tradition is commonly viewed as the antonym of modernity. The problem is addressed by practical exercises and fieldwork studies in the application of vernacular traditions to current problems. This study investigates some aspects of mainstream modernist design solutions and concepts inherent in the vernacular of Asia, particularly that of the Chittagong Hill Tracts (CHT. This work hinges on such ideas and practices as ecological design, modular and incremental design, standardization, and flexible and temporal concepts in the design of spaces. The blurred edges between the traditional and modern technical aspects of building design, as addressed by both vernacular builders and modern architects, are explored.

  10. Development of phase change materials based microencapsulated technology for buildings: A review

    Energy Technology Data Exchange (ETDEWEB)

    Tyagi, V.V.; Kaushik, S.C. [Centre for Energy Studies, Indian Institute of Technology Delhi, Hauz Khas, New Delhi 110016 (India); Tyagi, S.K. [School of Infrastructure Technology and Resource Management, Shri Mata Vaishno Devi University, Katra 182320, J and K (India); Akiyama, T. [Center for Advanced Research of Energy Conversion Materials, Hokkaido University, Kita 13, Nishi 8, Kita-ku, Sapporo 060-86283 (Japan)

    2011-02-15

    Thermal energy storage (TES) systems using phase change material (PCM) have been recognized as one of the most advanced energy technologies in enhancing the energy efficiency and sustainability of buildings. Now the research is focus on suitable method to incorporate PCMs with building. There are several methods to use phase change materials (PCMs) in thermal energy storage (TES) for different applications. Microencapsulation is one of the well known and advanced technologies for better utilization of PCMs with building parts, such as, wall, roof and floor besides, within the building materials. Phase change materials based microencapsulation for latent heat thermal storage (LHTS) systems for building application offers a challenging option to be employed as effective thermal energy storage and a retrieval device. Since the particular interest in using microencapsulation PCMs for concrete and wall/wallboards, the specific research efforts on both subjects are reviewed separately. This paper presents an overview of the previous research work on microencapsulation technology for thermal energy storage incorporating the phase change materials (PCMs) in the building applications, along with few useful conclusive remarks concluded from the available literature. (author)

  11. Machine to machine (M2M) technology in demand responsive commercial buildings

    Energy Technology Data Exchange (ETDEWEB)

    Watson, David S.; Piette, Mary Ann; Sezgen, Osman; Motegi, Naoya; ten Hope, Laurie

    2004-08-01

    Machine to Machine (M2M) is a term used to describe the technologies that enable computers, embedded processors, smart sensors, actuators and mobile devices to communicate with one another, take measurements and make decisions--often without human intervention. M2M technology was applied to five commercial buildings in a test. The goal was to reduce electric demand when a remote price signal rose above a predetermine price. In this system, a variable price signal was generated from a single source on the Internet and distributed using the meta-language, XML (Extensible Markup Language). Each of five commercial building sites monitored the common price signal and automatically shed site-specific electric loads when the price increased above predetermined thresholds. Other than price signal scheduling, which was set up in advance by the project researchers, the system was designed to operate without human intervention during the two-week test period. Although the buildings responded to the same price signal, the communication infrastructures used at each building were substantially different. This study provides an overview of the technologies used at each building site, the price generator/server, and each link in between. Network architecture, security, data visualization and site-specific system features are characterized. The results of the test are discussed, including: functionality at each site, measurement and verification techniques, and feedback from energy managers and building operators. Lessons learned from the test and potential implications for widespread rollout are provided.

  12. Y-12 Plant Decontamination and Decommissioning Technology Logic Diagram for Building 9201-4. Volume 1: Technology evaluation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    During World War 11, the Oak Ridge Y-12 Plant was built as part of the Manhattan Project to supply enriched uranium for weapons production. In 1945, Building 9201-4 (Alpha-4) was originally used to house a uranium isotope separation process based on electromagnetic separation technology. With the startup of the Oak Ridge K-25 Site gaseous diffusion plant In 1947, Alpha-4 was placed on standby. In 1953, the uranium enrichment process was removed, and installation of equipment for the Colex process began. The Colex process--which uses a mercury solvent and lithium hydroxide as the lithium feed material-was shut down in 1962 and drained of process materials. Residual Quantities of mercury and lithium hydroxide have remained in the process equipment. Alpha-4 contains more than one-half million ft{sup 2} of floor area; 15,000 tons of process and electrical equipment; and 23,000 tons of insulation, mortar, brick, flooring, handrails, ducts, utilities, burnables, and sludge. Because much of this equipment and construction material is contaminated with elemental mercury, cleanup is necessary. The goal of the Y-12 Plant Decontamination and Decommissioning Technology Logic Diagram for Building 9201-4 is to provide a planning document that relates decontamination and decommissioning and waste management problems at the Alpha-4 building to the technologies that can be used to remediate these problems. The Y-12 Plant Decontamination and Decommissioning Technology Logic Diagram for Building 9201-4 builds on the methodology transferred by the U.S. Air Force to the Environmental Management organization with DOE and draws from previous technology logic diagram-efforts: logic diagrams for Hanford, the K-25 Site, and ORNL.

  13. Pollution prevention opportunity assessment for building 878, manufacturing science and technology, organization 14100.

    Energy Technology Data Exchange (ETDEWEB)

    Klossner, Kristin Ann

    2004-05-01

    This report describes the methodology, analysis and conclusions of a preliminary assessment carried out for activities and operations at Sandia National Laboratories Building 878, Manufacturing Science and Technology, Organization 14100. The goal of this assessment is to evaluate processes being carried out within the building to determine ways to reduce waste generation and resource use. The ultimate purpose of this assessment is to analyze and prioritize processes within Building 878 for more in-depth assessments and to identify projects that can be implemented immediately.

  14. CONSTRUCTION QUALITY SUPERVISION AND CONTROL OF BUILDING ENERGY-SAVING ENGINEERING%建筑节能工程施工质量监控

    Institute of Scientific and Technical Information of China (English)

    沈振岳; 脱红勇; 罗星

    2011-01-01

    建筑节能工程是贯彻我国可持续发展战略的重要举措,为尽快实现我国建筑节能目标,应按照国家有关法律、法规的规定,采用节能型的建筑材料、产品和设备,提高建筑物围护结构的保温隔热性能.减少建筑使用过程中的采暖、制冷、照明能耗,合理有效地利用能源.在建筑节能工程中,加强事前控制、过程控制和建筑节能工程验收,从而保证建筑节能工程质量.%Building energy-saving engineering is an important measure for implementation of the sustainable development strategy of China. In order to reach the domestic building energy-saving target as soon as possible,energy-saving building materials, products and equipments shall be adopted according to relevant national laws and regulations, to improve the thermal insulation and heat retardation performances of building enclosure structure, to reduce the energy consumption in heating, refrigeration and illumination of building, and to use the energy reasonably and effectively. In building energy-saving engineering, precontrol, process control and acceptance of building energy-saving engineering are strengthened to ensure the building energy-saving engineering quality.

  15. Building the capacity for evidence-based clinical nursing leadership: the role of executive co-coaching and group clinical supervision for quality patient services.

    Science.gov (United States)

    Alleyne, Jo; Jumaa, Mansour Olawale

    2007-03-01

    The general aims of this article were to facilitate primary care nurses (District Nurse Team Leaders) to link management and leadership theories with clinical practice and to improve the quality of the service provided to their patients. The specific aim was to identify, create and evaluate effective processes for collaborative working so that the nurses' capacity for clinical decision-making could be improved. This article, part of a doctoral study on Clinical Leadership in Nursing, has wider application in the workplace of the future where professional standards based on collaboration will be more critical in a world of work that will be increasingly complex and uncertain. This article heralds the type of research and development activities that the nursing and midwifery professions should give premier attention to, particularly given the recent developments within the National Health Service in the United Kingdom. The implications of: Agenda for Change, the Knowledge and Skills Framework, 'Our Health, Our Care, Our Say' and the recent proposals from the article 'Modernising Nursing Career', to name but a few, are the key influences impacting on and demanding new ways of clinical supervision for nurses and midwives to improve the quality of patient management and services. The overall approach was based on an action research using a collaborative enquiry within a case study. This was facilitated by a process of executive co-coaching for focused group clinical supervision sessions involving six district nurses as co-researchers and two professional doctoral candidates as the main researchers. The enquiry conducted over a period of two and a half years used evidence-based management and leadership interventions to assist the participants to develop 'actionable knowledge'. Group clinical supervision was not practised in this study as a form of 'therapy' but as a focus for the development of actionable knowledge, knowledge needed for effective clinical management and

  16. A Novel Method for Technology Forecasting and Developing R&D Strategy of Building Integrated Photovoltaic Technology Industry

    Directory of Open Access Journals (Sweden)

    Yu-Jing Chiu

    2012-01-01

    Full Text Available Because of global warming, renewable energy technologies have become more essential currently, with solar energy technology advancing worldwide. Therefore, interdisciplinary integration is an important trend, and building-integrated photovoltaic (BIPV is an emerging technology involving the photovoltaic and building fields. The purpose of this study is to understand the technology evolution of BIPV and to determine the R&D planning direction. This paper proposes a hybrid approach to explore the life cycle of BIPV technology and develop the R&D strategy of related industries. The proposed approach comprises the following submodules. First, patent analysis is employed to transform patent documents into structured data. Second, the logistic growth model is used to explore the life cycle of BIPV technology. Third, a patent matrix map analysis is used to develop the R&D strategy of the BIPV industry. Through the analysis by the logistic model, the BIPV technology is transformed from the emerging stage to the growth stage of a long-term life cycle. The other important result is created by the three-dimensional matrix for R&D strategies in this paper.

  17. The real relationship in psychotherapy supervision.

    Science.gov (United States)

    Watkins, C Edward

    2011-01-01

    While the real relationship has long been addressed in psychoanalysis and psychotherapy, the matter of the real relationship in psychotherapy supervision has yet to receive any attention. Ample supervisory focus has indeed been given to the working alliance and transference-countertransference configuration (including parallel processes), but after a century of psychotherapy supervision, any mention whatsoever of real relationship phenomena is absent. In this paper, the following hypotheses are proposed: The real relationship (1) is a crucial component of the supervision relationship that has transtheoretical implications; (2) exists from the moment supervision begins until its end; (3) is the forever silent yet forever substantive contributor to supervisory process and outcome; (4) exerts a significant impact on (a) the development and establishment of the supervisory working alliance and (b) the unfolding and eventual utilization of the transference-countertransference experience in the supervisory situation; (5) consists of at least two dimensions in supervision--realism and genuineness--that vary along valence and magnitude continua (building on the works of Greenson and Gelso), and (6) deserves a place of eminence equal to the working alliance and transference-countertransference configuration if supervision theory, practice, and research are to be most fully informed. The possibility of using recent real relationship research in psychotherapy as a prototype to inform future research in supervision is presented, and two case examples are provided to illustrate the seeming power of real relationship phenomena in psychotherapy supervision.

  18. Supervision as Metaphor

    Science.gov (United States)

    Lee, Alison; Green, Bill

    2009-01-01

    This article takes up the question of the language within which discussion of research degree supervision is couched and framed, and the consequences of such framings for supervision as a field of pedagogical practice. It examines the proliferation and intensity of metaphor, allegory and allusion in the language of candidature and supervision,…

  19. A Supervision of Solidarity

    Science.gov (United States)

    Reynolds, Vikki

    2010-01-01

    This article illustrates an approach to therapeutic supervision informed by a philosophy of solidarity and social justice activism. Called a "Supervision of Solidarity", this approach addresses the particular challenges in the supervision of therapists who work alongside clients who are subjected to social injustice and extreme marginalization. It…

  20. Good supervision and PBL

    DEFF Research Database (Denmark)

    Otrel-Cass, Kathrin

    This field study was conducted at the Faculty of Social Sciences at Aalborg University with the intention to investigate how students reflect on their experiences with supervision in a PBL environment. The overall aim of this study was to inform about the continued work in strengthening supervision...... at this faculty. This particular study invited Master level students to discuss: • How a typical supervision process proceeds • How they experienced and what they expected of PBL in the supervision process • What makes a good supervision process...

  1. Computer Three-dimensional reproduction technology of buildings in Digital City

    Institute of Scientific and Technical Information of China (English)

    Liuhao; Dai,Jufeng; Liu,Zhaoping

    2005-01-01

    In real-life of today, computer show dynamic and mutual for buildings is often necessary using virtual reality. Establishing virtual reality has a large choice of methods, but the differences of effects are big. A best technology is got by study in the paper, it is very convenient and agility.Key words: Virtual reality; multi-dimension material; threedimension; Boolean operation

  2. Automation of the Technological Process to Produce Building Frame-Monolithic Modules Based on Fluoranhydrite

    Science.gov (United States)

    Fedorchuk, J.; Sadenova, M.; Rusina, O.

    2016-01-01

    The paper first proposes the automation of the technological process to produce building frame-monolithic modules from production wastes, namely technogenic anhydrite and fluoranhydrite. A functional diagram of the process automation is developed, the devices to perform control and maintenance with account of the production characteristics are chosen.

  3. ITCOLE Project: Designing Innovative Technology for Collaborative Learning and Knowledge Building.

    Science.gov (United States)

    Leinonen, Teemu; Hakkarainen, Kai; Appelt, Wolfgang; Dean, Philip; Gomez-Skarmetav, A.; Ligorio, Beatrice; Lipponen, Lasse; Merisaari, Samu; Pontecorvo, Clotilde; Sligte, Henk; Vosniadou, Stella

    The purpose of this paper is to describe the pedagogical background and design rationale of ITCOLE (Innovative Technology for Collaborative Learning) software. The ITCOLE software is a highly scalable and easy to use modular environment that supports students' joint efforts to build knowledge together, whether they are primary, secondary, or older…

  4. FSE - Center for research, training and development. The Siemens Building Technologies office building at Frankfurt, Main; Forschungs-, Schulungs- und Entwicklungszentrum (FSE). Firmengebaeude der Siemens Building Technologies in Frankfurt/Main

    Energy Technology Data Exchange (ETDEWEB)

    Schmid, W.

    2003-07-01

    The new office building of Siemens Building Technologies (SBT) is described. Apart from an impressive architecture, the system also has a state-of-the-art facility management system based on open protocols like Ethernet TCP/IP, BACnet and LONTalk. [German] Als sachlich-technisches Gebaeude mit einem Hang zum Understatement wurde der neue Firmensitz von Siemens Building Technologies (SBT) Deutschland errichtet. Aehnlich wie das Produkt-, System- und Dienstleistungsangebot entspricht das Forschungs-, Schulungs- und Entwicklungszentrum ''FSE'' ganz den Prinzipien Offenheit, Flexibilitaet und Standardisierung. Das in Systembauweise aus Stahlbetonfertigteilen erstellte Gebaeude vermittelt trotz wirtschaftlich orientierter Bescheidenheit ein hohes Mass an Identitaet und sachlicher Repraesentanz. In dem klar strukturierten Baukoerper mit eher klassischer Heizungs- und Lueftungstechnik ist die derzeit wohl modernste gewerkeuebergreifende Gebaeudeautomation installiert, die ganz auf offenen Protokollen wie Ethernet TCP/IP, BACnet und LONTalk aufbaut. (orig.)

  5. Reflections on Strengthening Building of Discipline Inspection and Supervision Teams%加强企业纪检监察干部队伍建设的思考

    Institute of Scientific and Technical Information of China (English)

    董延宁

    2014-01-01

    Problems exist in staffing, professional competence, outlook, and professional commitment of SOEs’ discipline inspection and supervision teams, which is mainly due to their lack of understanding for the profession, lack of targeted training available and the less than adequate standard to which they hold themselves. Therefore to improve the situation, measures must be taken to raise enrollment standards, strengthen training, straighten out relations, and enhance personal discipline.%目前,国有企业纪检监察队伍在人员配备、业务能力以及观念作风方面都存在问题,其原因主要是对纪检监察工作认识不足、有针对性的监察培训欠缺以及纪检干部自身要求不严。因此应从严把入口关、加强培养、理顺关系、个人自律几个方面采取措施予以解决。

  6. Understanding the build-up of a technological innovation system around hydrogen and fuel cell technologies

    NARCIS (Netherlands)

    Suurs, R.A.A.; Hekkert, M.P.; Smits, R.E.H.M.

    2009-01-01

    This study provides insight into the development of hydrogen and fuel cell technologies in the Netherlands (1980-2007). This is done by applying a Technological Innovation System (TIS) approach. This approach takes the perspective that a technology is shaped by a surrounding network of actors, insti

  7. Solar building construction - new technologies; Solares Bauen - Neue Technologien fuer Gebaeude

    Energy Technology Data Exchange (ETDEWEB)

    Luther, J.; Voss, K.; Wittwer, V. [Fraunhofer-Inst. fuer Solare Energiesysteme, Freiburg (Germany). Abt. ``Thermische und Optische Systeme``

    1998-02-01

    There is an increasing demand for integrated building concepts in order to reduce energy consumption. Building design, construction and heating, ventilation and air-conditioning (HVAC) technology are decisive in this respect. Thus, an essentially higher energy efficiency is achieved and solar energy becomes the main energy source. An `active building envelope` assumes the task of controlling the energy flows between inside and outside. This paper reports on new components, system concepts and planning tools for solar building. (orig.) [Deutsch] Fuer zukuenftige Bauten werden in hohem Masse Forderungen nach integrierten Konzepten zur Begrenzung des Energieverbrauchs gestellt. Gestalt, Konstruktion und Klimatechnik sind dabei massgebliche Einflussfaktoren. Hierdurch wird eine wesentlich hoehere Energieeffizienz erzielt und Solarenergie kann die uebrigen Energiequellen zurueckdraengen. Eine `aktive Gebaeudehuelle` uebernimmt die Aufgabe, den Energiefluss zwischen Innen und Aussen zu steuern. Der Beitrag berichtet ueber neue Komponenten, Systemkonzepte und Planungswerkzeuge fuer das Solare Bauen. (orig.)

  8. Technological retrofit of existing buildings: dwelling quality, environmental sustainability, economic rising

    Directory of Open Access Journals (Sweden)

    Mariangela Bellomo

    2011-04-01

    Full Text Available Redevelopment can stand as an effective response to the converging ecological, energy and economic crises if the energy efficiency of the built heritage can be enhanced using renewable energy and innovative technologies with a low environmental impact. To this end, the Research Unit Technology and Environment, University of Naples Federico II, is undertaking a structured set of studies addressing the issue of retrofit technology of buildings in Campania put up in the second half of the 20th century to help in defining best practices for planning, design and production.

  9. Advanced decision support techniques in combination with smart card and local operating network technologies for intelligent energy management in buildings

    NARCIS (Netherlands)

    Kolokotsa, D.; Kalaitzakis, K.; Stavrakakis, G.; Sutherland, G.; Santamouris, M.; Soultanidis, S.; Moumtzis, P.; Brunet, J.; Guillaumin, P.; Pelegrini, L.; Romiti, G.; Bakker, L.G.

    1998-01-01

    The purpose of the present paper is to present recent developments of integrated building energy manaeement system combining intelligent decision making systems and smart card technology using Local Operating Network (LON) techniques applying mainly to existing buildings and to new buildings with

  10. Distributed Energy Resources On-Site Optimization for Commercial Buildings with Electric and Thermal Storage Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Lacommare, Kristina S H; Stadler, Michael; Aki, Hirohisa; Firestone, Ryan; Lai, Judy; Marnay, Chris; Siddiqui, Afzal

    2008-05-15

    The addition of storage technologies such as flow batteries, conventional batteries, and heat storage can improve the economic as well as environmental attractiveness of on-site generation (e.g., PV, fuel cells, reciprocating engines or microturbines operating with or without CHP) and contribute to enhanced demand response. In order to examine the impact of storage technologies on demand response and carbon emissions, a microgrid's distributed energy resources (DER) adoption problem is formulated as a mixed-integer linear program that has the minimization of annual energy costs as its objective function. By implementing this approach in the General Algebraic Modeling System (GAMS), the problem is solved for a given test year at representative customer sites, such as schools and nursing homes, to obtain not only the level of technology investment, but also the optimal hourly operating schedules. This paper focuses on analysis of storage technologies in DER optimization on a building level, with example applications for commercial buildings. Preliminary analysis indicates that storage technologies respond effectively to time-varying electricity prices, i.e., by charging batteries during periods of low electricity prices and discharging them during peak hours. The results also indicate that storage technologies significantly alter the residual load profile, which can contribute to lower carbon emissions depending on the test site, its load profile, and its adopted DER technologies.

  11. International vs. domestic technology in-licensing: How do Chinese firms build their technological capabilities?

    DEFF Research Database (Denmark)

    Li, Ying; Wang, Yuandi

    2011-01-01

    attention in the extant literature on both innovation management and international business. However, little has been done to reach a clear understanding on whether Chinese firms can benefit from international or domestic technology in-licensing and improve their own technological capabilities. This study......, therefore, pursues this endeavor by using a unique dataset from China State of Intellectual Property Office (SIPO) containing information on large Chinese firms. The findings of this empirical study indicate that firms with international technology in-licensing possess stronger technological innovation...

  12. Double Wall Framing Technique An Example of High Performance, Sustainable Building Envelope Technology

    Energy Technology Data Exchange (ETDEWEB)

    Kosny, Dr. Jan [Fraunhofer Center for Sustainable Energy Systems (CSE), Boston; Asiz, Andi [Prince Mohammad Bin Fahd University, Kingdom of Saudi Arabia; Shrestha, Som S [ORNL; Biswas, Kaushik [ORNL; Nitin, Shukla [Fraunhofer Center for Sustainable Energy Systems (CSE), Boston

    2015-01-01

    Double wall technologies utilizing wood framing have been well-known and used in North American buildings for decades. Most of double wall designs use only natural materials such as wood products, gypsum, and cellulose fiber insulation, being one of few building envelope technologies achieving high thermal performance without use of plastic foams or fiberglass. Today, after several material and structural design modifications, these technologies are considered as highly thermally efficient, sustainable option for new constructions and sometimes, for retrofit projects. Following earlier analysis performed for U.S. Department of Energy by Fraunhofer CSE, this paper discusses different ways to build double walls and to optimize their thermal performance to minimize the space conditioning energy consumption. Description of structural configuration alternatives and thermal performance analysis are presented as well. Laboratory tests to evaluate thermal properties of used insulation and whole wall system thermal performance are also discussed in this paper. Finally, the thermal loads generated in field conditions by double walls are discussed utilizing results from a joined project performed by Zero Energy Building Research Alliance and Oak Ridge National Laboratory (ORNL), which made possible evaluation of the market viability of low-energy homes built in the Tennessee Valley. Experimental data recorded in two of the test houses built during this field study is presented in this work.

  13. ASEAN--USAID Buildings Energy Conservation Project final report. Volume 2, Technology

    Energy Technology Data Exchange (ETDEWEB)

    Levine, M.D.; Busch, J.F. [eds.

    1992-06-01

    This volume reports on research in the area of energy conservation technology applied to commercial buildings in the Association of Southeast Asian Nations (ASEAN) region. Unlike Volume I of this series, this volume is a compilation of original technical papers prepared by different authors in the project. In this regard, this volume is much like a technical journal. The papers that follow report on research conducted by both US and ASEAN researchers. The authors representing Indonesia, Malaysia, Philippines, and Thailand, come from a range of positions in the energy arena, including government energy agencies, electric utilities, and universities. As such, they account for a wide range of perspectives on energy problems and the role that technology can play in solving them. This volume is about using energy more intelligently. In some cases, the effort is towards the use of more advanced technologies, such as low-emittance coatings on window glass, thermal energy storage, or cogeneration. In others, the emphasis is towards reclaiming traditional techniques for rendering energy services, but in new contexts such as lighting office buildings with natural light, or cooling buildings of all types with natural ventilation. Used in its broadest sense, the term ``technology`` encompasses all of the topics addressed in this volume. Along with the more customary associations of technology, such as advanced materials and equipment and the analysis of their performance, this volume treats design concepts and techniques, analysis of ``secondary`` impacts from applying technologies (i.e., unintended impacts, or impacts on parties not directly involved in the purchase and use of the technology), and the collection of primary data used for conducting technical analyses.

  14. Application of BIM Technology in Intelligent Buildings%BIM技术在智慧建筑中的应用∗

    Institute of Scientific and Technical Information of China (English)

    王玉卿; 穆华倩

    2016-01-01

    By the discussion of the intelligent city, intelligent buildings, BIM technology and BIM technology application, the key role of BIM technology in achieving intelligent buildings is analyzed, and a wide range of application of BIM technology in intelligent buildings is explored.%通过对智慧城市、智慧建筑、BIM技术和BIM应用等内容的讨论,分析探讨BIM技术在实现智慧建筑中的关键作用及其在智慧建筑中的多方面应用。

  15. On The Supervision and Control of Energy Saving in Building Engineering%浅谈建筑工程节能质量监督与控制

    Institute of Scientific and Technical Information of China (English)

    侯博瀚

    2015-01-01

    The society paid more attention to the sustainable development strategy of energy conservation, the energy saving measures of building engineering and energy saving quality control are paid more and more attention by engineers. This paper expounded the common energy saving control points,construction steps and details of the construction of building engineering. Through the summary and sublimation of business knowledge to do such daily quality control and management work,do a job with skill and ease know the score.%建筑工程的节能措施与节能质量控制被越来越多的工程人员所重视。论文阐述了建筑工程常见的节能控制要点、施工步骤及细部节点构造。通过业务知识的总结与升华做到对日常节能质量控制和管理工作的心中有数、游刃有余。

  16. Historic Buildings of the Warsaw University of Technology - Selected Issues of Renovation, Modernisation and Adaptation

    Science.gov (United States)

    Wagner, Anna Agata

    2016-06-01

    The historic buildings of the Warsaw University of Technology display not only outstanding architectural values, but are also representative of the trends in preservation, restoration, and adaptation that were prevalent at the time of their modernization. The post-war rebuilding of the WUT was more akin to modernization than reconstruction. But the freedom to shape modern architectural forms in the 1960s and '70s brought with it a lack of respect for their historic environment. A change in the approach to historic buildings and their integration with modern architecture came in the late 1970s. The most recent modernization of the WUT's historic buildings, especially after Poland's accession to the EU, resulted in many good examples of proper, harmonious integration between the `modern' and the `traditional'.

  17. Building America Best Practices Series, Volume 6: High-Performance Home Technologies: Solar Thermal & Photovoltaic Systems

    Energy Technology Data Exchange (ETDEWEB)

    Baechler, Michael C.; Gilbride, Theresa L.; Ruiz, Kathleen A.; Steward, Heidi E.; Love, Pat M.

    2007-06-04

    This guide is was written by PNNL for the US Department of Energy's Building America program to provide information for residential production builders interested in building near zero energy homes. The guide provides indepth descriptions of various roof-top photovoltaic power generating systems for homes. The guide also provides extensive information on various designs of solar thermal water heating systems for homes. The guide also provides construction company owners and managers with an understanding of how solar technologies can be added to their homes in a way that is cost effective, practical, and marketable. Twelve case studies provide examples of production builders across the United States who are building energy-efficient homes with photovoltaic or solar water heating systems.

  18. Historic Buildings of the Warsaw University of Technology - Selected Issues of Renovation, Modernisation and Adaptation

    Directory of Open Access Journals (Sweden)

    Wagner Anna Agata

    2016-06-01

    Full Text Available The historic buildings of the Warsaw University of Technology display not only outstanding architectural values, but are also representative of the trends in preservation, restoration, and adaptation that were prevalent at the time of their modernization. The post-war rebuilding of the WUT was more akin to modernization than reconstruction. But the freedom to shape modern architectural forms in the 1960s and ’70s brought with it a lack of respect for their historic environment. A change in the approach to historic buildings and their integration with modern architecture came in the late 1970s. The most recent modernization of the WUT’s historic buildings, especially after Poland’s accession to the EU, resulted in many good examples of proper, harmonious integration between the ‘modern’ and the ‘traditional’.

  19. Smart partition system – A room level support system for integrating smart technologies into existing buildings

    Directory of Open Access Journals (Sweden)

    Sheng-Fen Chien

    2014-12-01

    Full Text Available We proposed a support system called the “Smart Partition System” for infill elements that integrate smart technologies according to the Open Building principles. The design requirements were collected from design practitioners. These design requirements consisted of both architectural and information subsystems. The Smart Partition System was composed of the following multiple levels of smartness: the foundation/core level with an embedded design knowledge in the support system and the utility level with a modular infill that integrate smart technologies. We constructed functional prototypes to demonstrate the feasibility of our proposed support system and some of the possibilities of the smart infill elements. Furthermore, the prototypes were evaluated by design practitioners. We compared our approach with current practices of smart building developments, and we also discussed some future prospects.

  20. Innovative development of the building complex on the basis of environmental and energy-efficient technologies

    Directory of Open Access Journals (Sweden)

    Kireeva Ekaterina E.

    2017-01-01

    Full Text Available The objective of the current study was to determine the priorities of innovative development of the building complex on the basis of the analysis of the environmental and energy-efficient technologies that were applied. Analysis of energy efficiency and environmental technologies in the construction industry showed that residential housing consumes 23% of the total primary energy supply in Russia. The construction sector is responsible for 30% of CO2 emissions into the atmosphere. Russia annually spends approximately 170 million tons of fuel equivalents for heating, ventilation and air conditioning of residential housing. Comparing Russia with the countries of similar climatic conditions it should be noted that energy consumption value in Russia is significantly higher (the excess ranges from 24 to 47% depending upon the building. Having analyzed the housing the authors offer the ways of building complex innovative development that mean the following: reindustrialization of material and technical resources of construction companies and the introduction of managerial innovations; the development and application of new high-tech building structures, products and materials that are to ensure the economic and environmental efficiency of buildings’ construction and operation.

  1. Conversion of Industrial Buildings and Areas in Terms of Sustainable Development by Using BIM Technology: Analysis and Further Developments

    Directory of Open Access Journals (Sweden)

    Miroslavas Pavlovskis

    2016-02-01

    Full Text Available The article deals with abandoned industrial buildings and lands conversion concept, objectives, problems, beneficial results of a successful conversion for urban expansion, as a complex process of sustainable development. The tools for making effective management and usage of abandoned buildings decisions are considered. The article analyzes the 5D BIM model throughout the life cycle of the building. The foreign good practice is analyzed, where the modern digital technology is used for reconstruction of old buildings. The building information model application possibilities are examined throughout the lifespan of a building. The measures for CO2 emission reduction in the construction sector are proposed. Finaly, the model for conversion of abanoded buildings is proposed, based on MCDM and BIM technologies.

  2. A New Mode of Coal Mining Under Buildings with Paste-Like Backfill Technology

    Institute of Scientific and Technical Information of China (English)

    崔建强; 孙恒虎; 黄玉诚

    2002-01-01

    The formation of the paste-like backfill technology was introduced briefly in this paper. From the actual cases of coal mines, a new mode of coal mining un der buildings with the technology was proposed. And its specificity was analyzed , and a further introduction to the full-sand-soil solidifying material was given. The main parts of the backfill system, such as the backfill preparation system, the pipeline transportation system, the backfill systems in fully-mechanized mining faces and the backfill process, were presented emphatically.

  3. Major requirements for building Smart Homes in Smart Cities based on Internet of Things technologies

    OpenAIRE

    Hui, Terence K. L.; Sherratt, R. Simon; Diaz Sanchez, Daniel

    2016-01-01

    The recent boom in the Internet of Things (IoT) will turn Smart Cities and Smart Homes (SH) from hype to reality. SH is the major building block for Smart Cities and have long been a dream for decades, hobbyists in the late 1970s made Home Automation (HA) possible when personal computers started invading home spaces. While SH can share most of the IoT technologies, there are unique characteristics that make SH special. From the result of a recent research survey on SH and IoT technologies, th...

  4. The foundation mass concrete construction technology of Hongyun Building B tower raft

    Science.gov (United States)

    Liu, Yu; Yin, Suhua; Wu, Yanli; Zhao, Ying

    2017-08-01

    The foundation of Hongyun building B tower is made of raft board foundation which is 3300mm in the thickness and 2800mm beside side of the core tube. It is researched that the raft foundation mass concrete construction technology is expatiated from temperature and cracks of the raft foundation and the temperature control and monitoring of the concrete base slab construction and concrete curing.

  5. Applications in Cross-Curriculum Teaching The Synthesis of the Design Studio and Building Technology Seminar

    OpenAIRE

    John Enright

    2012-01-01

    “Change or perish. You need to prepare yourself for a profession that you are notgoing to recognize a decade from now.”Thom Mayne, Remarks on building information modeling at the 2005 AIAConvention, Las Vegas, NVToday architects are faced with new challenges involving Integrated Project Delivery and associated digital technologies that are rapidly changing the way architects work. Collaboration is the key to this newway of working as architects discover that the management of buildinginformat...

  6. Applied analysis of ventilation technology in residential buildings in Changjiang river valley

    Institute of Scientific and Technical Information of China (English)

    杨露露; 卢军; 王曦; 甘灵丽

    2009-01-01

    Making the use of ventilation technology may decrease building energy consumption,improve indoor thermal environment,and ameliorate indoor air quality. Combining with the meteorological characteristics in the Changjiang river valley and focusing on Chongqing,this work makes an applied analysis of the feasibility of intermittent mechanical ventilation. By comparison of various ventilation modes,it gives a summary of the suitable ventilation ways for different weather conditions with the combination of testing data and experimental data.

  7. Technological advances in zero energy buildings; Avances tecnologicos en edificios de energia cero

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez Milla, Guillermo; Perez Rebolledo, Hugo; Acoltzi Acoltzi, Higinio [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2011-07-01

    Buildings use a large amount of energy to operate and are one of the main sources of contaminating emissions. A building is a complex system and all of their components contribute to the total energy demand. The technology to construct zero-energy buildings is already available, but obstacles exist such as the lack of information and technical training of architects and engineers to design highly energy efficient buildings. The present article describes the progress to-date and the future prospects for the design and construction of zero-energy buildings, as well as the problems involved in its implementation. [Spanish] Los edificios usan una gran cantidad de energia para operar y son una de las principales fuentes de emisiones contaminantes. Un edificio es un sistema complejo y todos sus componentes contribuyen a la demanda total de energia. La tecnologia para construir edificios de energia cero ya esta disponible, pero existen barreras como falta de informacion o capacitacion tecnica a arquitectos e ingenieros, para disenar edificios de alta eficiencia energetica. El presente articulo muestra los avances a la fecha y la prospectiva para el diseno y construccion de edificios de energia cero, asi como la problematica para su implementacion.

  8. New Energy Building and Its Technology%新能源建筑及其技术

    Institute of Scientific and Technical Information of China (English)

    赵仰玉

    2013-01-01

    随着科学的不断进步,推出了新能源的应用,以及新能源建筑的应用。通过分析太阳能建筑、地热能建筑、生物能建筑、风能建筑和综合新能源建筑的应用,以及对技术的分析,了解新能源建筑的真正意义。本文通过对几种新能源的分析,分析了新能源建筑及其技术,了解了新能源建筑在我国建筑领域的重要地位。%With the continuous progress of science, it introdu-ced the application of new energy, as wel as the application of new energy building. Through the analysis of solar building, geothermal energy, biomass energy, wind power construction building construction and comprehensive new energy constru-ction applications, as wel as to technical analysis, to understa-nd the real meaning of new energy building. This paper thro-ugh the analysis of several kinds of new energy, analyzes the new energy building and its technology, understanding the im-portant role of new energy construction in construction field.

  9. Networks of Professional Supervision

    Science.gov (United States)

    Annan, Jean; Ryba, Ken

    2013-01-01

    An ecological analysis of the supervisory activity of 31 New Zealand school psychologists examined simultaneously the theories of school psychology, supervision practices, and the contextual qualities that mediated participants' supervisory actions. The findings indicated that the school psychologists worked to achieve the supervision goals of…

  10. Forskellighed i supervision

    DEFF Research Database (Denmark)

    Petersen, Birgitte; Beck, Emma

    2009-01-01

    Indtryk og tendenser fra den anden danske konference om supervision, som blev holdt på Københavns Universitet i oktober 2008......Indtryk og tendenser fra den anden danske konference om supervision, som blev holdt på Københavns Universitet i oktober 2008...

  11. Experiments in Virtual Supervision.

    Science.gov (United States)

    Walker, Rob

    This paper examines the use of First Class conferencing software to create a virtual culture among research students and as a vehicle for supervision and advising. Topics discussed include: computer-mediated communication and research; entry to cyberculture, i.e., research students' induction into the research community; supervision and the…

  12. Building the Technology Toolkit of Marketing Students: The Emerging Technologies in Marketing Initiative

    Science.gov (United States)

    Miller, Fred L.; Mangold, W. Glynn; Roach, Joy; Holmes, Terry

    2013-01-01

    New information technologies are transforming marketing practice, leading to calls for marketing academics to focus their research and teaching more tightly on areas relevant to practitioners. Developments in e-commerce, business geographic information systems (GIS), and social media offer powerful marketing tools to nontechnical users. This paper…

  13. Building the Technology Toolkit of Marketing Students: The Emerging Technologies in Marketing Initiative

    Science.gov (United States)

    Miller, Fred L.; Mangold, W. Glynn; Roach, Joy; Holmes, Terry

    2013-01-01

    New information technologies are transforming marketing practice, leading to calls for marketing academics to focus their research and teaching more tightly on areas relevant to practitioners. Developments in e-commerce, business geographic information systems (GIS), and social media offer powerful marketing tools to nontechnical users. This paper…

  14. Automated Demand Response Technology Demonstration Project for Small and Medium Commercial Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Page, Janie; Kiliccote, Sila; Dudley, Junqiao Han; Piette, Mary Ann; Chiu, Albert K.; Kellow, Bashar; Koch, Ed; Lipkin, Paul

    2011-07-01

    Small and medium commercial customers in California make up about 20-25% of electric peak load in California. With the roll out of smart meters to this customer group, which enable granular measurement of electricity consumption, the investor-owned utilities will offer dynamic prices as default tariffs by the end of 2011. Pacific Gas and Electric Company, which successfully deployed Automated Demand Response (AutoDR) Programs to its large commercial and industrial customers, started investigating the same infrastructures application to the small and medium commercial customers. This project aims to identify available technologies suitable for automating demand response for small-medium commercial buildings; to validate the extent to which that technology does what it claims to be able to do; and determine the extent to which customers find the technology useful for DR purpose. Ten sites, enabled by eight vendors, participated in at least four test AutoDR events per site in the summer of 2010. The results showed that while existing technology can reliably receive OpenADR signals and translate them into pre-programmed response strategies, it is likely that better levels of load sheds could be obtained than what is reported here if better understanding of the building systems were developed and the DR response strategies had been carefully designed and optimized for each site.

  15. On psychoanalytic supervision as signature pedagogy.

    Science.gov (United States)

    Watkins, C Edward

    2014-04-01

    What is signature pedagogy in psychoanalytic education? This paper examines that question, considering why psychoanalytic supervision best deserves that designation. In focusing on supervision as signature pedagogy, I accentuate its role in building psychoanalytic habits of mind, habits of hand, and habits of heart, and transforming theory and self-knowledge into practical product. Other facets of supervision as signature pedagogy addressed in this paper include its features of engagement, uncertainty, formation, and pervasiveness, as well as levels of surface, deep, and implicit structure. Epistemological, ontological, and axiological in nature, psychoanalytic supervision engages trainees in learning to do, think, and value what psychoanalytic practitioners in the field do, think, and value: It is, most fundamentally, professional preparation for competent, "good work." In this paper, effort is made to shine a light on and celebrate the pivotal role of supervision in "making" or developing budding psychoanalysts and psychoanalytic psychotherapists. Now over a century old, psychoanalytic supervision remains unparalleled in (1) connecting and integrating conceptualization and practice, (2) transforming psychoanalytic theory and self-knowledge into an informed analyzing instrument, and (3) teaching, transmitting, and perpetuating the traditions, practice, and culture of psychoanalytic treatment.

  16. 建立多方协同监督的科技项目监理体系%The Establishment of Multi-party Collaborative Supervision System of Science and Technology Project

    Institute of Scientific and Technical Information of China (English)

    韩靓; 林祥

    2013-01-01

    The biggest drawbacks of China's scientific and technological projects implementation is the lack of monitoring and e-valuation. Firstly, this paper argues that the relevant laws and regulations should be developed to protect the standardization and insti-tutionalization of monitoring and evaluation of science and technology project. Secondly, this paper builts up a multi-party collaborative supervision system of science and technology project, consists of the government, the independent third-party project management com-pany, the masses and project undertaking unit. The aim is to realize the diversification of supervision subject and the legalization of su-pervision mechanism. We can learn from foreign experience to optimize the government oversight way, including the introduction of modern project management model, the establishment of project evaluation mechanism and the establishment of invited supervisors to strengthen technology supervision of the administrative organs. The third-party supervision model has obvious advantages, but the gov-ernment should check the composition and qualification of supervision company strictly and avoid the assimilation phenomenon of super-vision company.%  目前我国科技项目实施中最大的弊端就是缺乏监督和评估。本文认为,首先,应该制定、完善相关法律法规,以保障科技项目监督和评估的规范化和制度化,实现监理机制法制化;其次,从优化政府科技行政监督方式、引入项目第三方监理方式和科技项目承担单位配合几方面,构建起由政府、独立第三方监理公司、群众和项目承担单位多方协同监督的科技项目监理体系,逐步实现监理主体多元化。其中,在优化政府科技监督方式方面可以借鉴国外经验,引入现代项目管理模式,加强项目实施的全过程管理;建立项目评估机制,强化项目管理的监督;设立“科技特邀监督员”,加强对科

  17. The Cryogenic Supervision System in NSRRC

    CERN Document Server

    Li, Hsing-Chieh; Chiou, Wen-Song; Hsiao, Feng-Zone; Tsai, Zong-Da

    2005-01-01

    The helium cryogenic system in NSRRC is a fully automatic PLC system using the Siemens SIMATIC 300 controller. Modularization in both hardware and software makes it easy in the program reading, the system modification and the problem debug. Based on the Laview program we had developed a supervision system taking advantage of the Internet technology to get system's real-time information in any place. The functions of this supervision system include the real-time data accessing with more than 300 digital/analog signals, the data restore, the history trend display, and the human machine interface. The data is accessed via a Profibus line connecting the PLC system and the supervision system with a maximum baud rate 1.5 Mbit/s. Due to this supervision system, it is easy to master the status of the cryogenic system within a short time and diagnose the problem.

  18. Climate change, insurance, and the buildings sector: Technological synergisms between adaptation and mitigation

    Energy Technology Data Exchange (ETDEWEB)

    Mills, Evan

    2002-11-01

    Examining the intersection of risk analysis and sustainable energy strategies reveals numerous examples of energy efficient and renewable energy technologies that offer insurance loss-prevention benefits. The growing threat of climate change provides an added motivation for the risk community to better understand this area of opportunity. While analyses of climate change mitigation typically focus on the emissions-reduction characteristics of sustainable energy technologies, less often recognized are a host of synergistic ways in which these technologies also offer adaptation benefits, e.g. making buildings more resilient to natural disasters. While there is already some relevant activity, there remain various barriers to significantly expanding these efforts. Achieving successful integration of sustainable energy considerations with risk-management objectives requires a more proactive orientation, and coordination among diverse actors and industry groups.

  19. Climate change, insurance and the building sector: technological synergisms between adaptation and mitigation

    Energy Technology Data Exchange (ETDEWEB)

    Mills, E. [Lawrence Berkeley National Laboratory, Berkeley, CA (United States)

    2003-08-01

    Examining the intersection of risk analysis and sustainable energy strategies reveals numerous examples of energy-efficient and renewable energy technologies that offer insurance loss-prevention benefits. The growing threat of climate change provides an added motivation for the risk community to understand better this area of opportunity. While analyses of climate change mitigation typically focus on the emissions-reduction characteristics of sustainable energy technologies, less often recognised are a host of synergistic ways in which these technologies also offer adaptation benefits, e.g. making buildings more resilient to natural disasters. While there is already some relevant activity, there remain various barriers to expanding these efforts significantly. Achieving successful integration of sustainable energy considerations with risk-management objectives requires a more proactive orientation, and coordination among diverse actors and industry groups. (author)

  20. Completion of Green Building by Korea Institute of Energy Research - Energy{center_dot}Conservation{center_dot}Environmental Technology

    Energy Technology Data Exchange (ETDEWEB)

    Park, Sang Dong [Korea Institute of Energy Research, Taejon (Korea)

    2001-04-01

    Korea Institute of Energy Research (KIER), which was fully aware that the effective utilization of energy could not only save energy but also reduce the environmental pollution due to a combustion exhaust gas, has built and operated 'the Ultra Energy Saving Building' whose energy consumption was only a fifth of general buildings as a example. KIER has started to research the project for the technology development and spread of Green Building in 'Enertech 21' - the most important research program of 1994 year - and has constructed the central building of the Institute with only the current available technology since the early of 1997 year, via researches by a step. Finally, KIER held the ceremony for the completion of Green Building in March sixth. This building is not just the first green building in Korea but also the representative building of energy environment research center, which will be marked out for a model for the domestic construction and construction industry in future. Therefore, this building has functions of exhibition, publicity, education, and experimentation for the building researchers as well as the office and researching place that is original function of this building. 4 figs., 5 tabs.

  1. Preliminary Findings from an Analysis of Building Energy Information System Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Granderson, Jessica; Piette, Mary Ann; Ghatikar, Girish; Price, Philip

    2009-06-01

    Energy information systems comprise software, data acquisition hardware, and communication systems that are intended to provide energy information to building energy and facilities managers, financial managers, and utilities. This technology has been commercially available for over a decade, however recent advances in Internet and other information technology, and analytical features have expanded the number of product options that are available. For example, features such as green house gas tracking, configurable energy analyses and enhanced interoperability are becoming increasingly common. Energy information systems are used in a variety of commercial buildings operations and environments, and can be characterized in a number of ways. Basic elements of these systems include web-based energy monitoring, web-based energy management linked to controls, demand response, and enterprise energy management applications. However the sheer number and variety of available systems complicate the selection of products to match the needs of a given user. In response, a framework was developed to define the capabilities of different types of energy information systems, and was applied to characterize approximately 30 technologies. Measurement is a critical component in managing energy consumption and energy information must be shared at all organizational levels to maintain persistent, efficient operations. Energy information systems are important to understand because they offer the analytical support to process measured data into information, and they provide the informational link between the primary actors who impact building energy efficiency - operators, facilities and energy managers, owners and corporate decision makers. In this paper, preliminary findings are presented, with a focus on overall trends and the general state of the technology. Key conclusions include the need to further pursue standardization and usability, x-y plotting as an under-supported feature, and

  2. Technology Prioritization: Transforming the U.S. Building Stock to Embrace Energy Efficiency

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-07-01

    This paper discusses the efforts to accelerate the transformation in the U.S. building energy efficiency sector using a new technology prioritization framework. The underlying analysis examines building energy use micro segments using the Energy Information Administration Annual Energy Outlook and other publically available information. The U.S. Department of Energy’s Building Technologies Office (BTO) has developed a prioritization tool in an effort to inform programmatic decision making based on the long-term national impact of different energy efficiency measures. The prioritization tool can be used to investigate energy efficiency measures under a variety of scenarios and has a built-in energy accounting framework to prevent double counting of energy savings within any given portfolio. This tool is developed to inform decision making and estimate long term potential energy savings for different market adoption scenarios. It provides an objective comparison of new and existing measures and is being used to inform decision making with respect to BTO’s portfolio of projects.

  3. Integration of Low Energy Technologies for Optimal Building and Space Conditioning Design

    Energy Technology Data Exchange (ETDEWEB)

    D.E. Fisher

    2006-01-07

    EnergyPlus is the DOE's newest building energy simulation engine. It was developed specifically to support the design of low energy building systems. This project focused on developing new low energy building simulation models for EnergyPlus, verifying and validating new and existing EnergyPlus models and transferring the new technology to the private sector. The project focused primarily on geothermal and radiant technologies, which are related by the fact that both are based on hydronic system design. As a result of this project eight peer reviewed journal and conference papers were added to the archival literature and five technical reports were published as M.S. theses and are available in the archival literature. In addition, several reports, including a trombe wall validation report were written for web publication. Thirteen new or significantly enhanced modules were added to the EnergyPlus source code and forty-two new or significantly enhanced sections were added to the EnergyPlus documentation as a result of this work. A low energy design guide was also developed as a pedagogical tool and is available for web publication. Finally several tools including a hybrid ground source heat pump optimization program and a geothermal heat pump parameter estimation tool were developed for research and design and are available for web publication.

  4. Supervision som undervisningsform i voksenspecialundervisningen

    DEFF Research Database (Denmark)

    Kristensen, René

    2000-01-01

    Supervision som undervisningsform i voksenspecialundervisningen. Procesarbejde i undervisning af voksne.......Supervision som undervisningsform i voksenspecialundervisningen. Procesarbejde i undervisning af voksne....

  5. Based on the content networking technology remote building fire water pressure real-time monitoring system%基于物联网技术的远程建筑消防水压实时监控系统

    Institute of Scientific and Technical Information of China (English)

    廖曙江; 刑佳佳; 陈睿迪; 徐培龙

    2012-01-01

    建筑消防供水系统由自动喷淋系统和消防水系统构成,消防供水系统的正常联动是关系到建筑物内人民群众生命安全重要保证.本文介绍一种基于物联网技术的建筑消防水压实时监控系统,对建筑物内部自动喷淋系统和消防水系统进行全天候2 4小时监控,达到自动监测、自动启泵供水目的,同时也满足了建筑消防水压远程实时监管的要求.%Building fire water supply system consists of automatic sprinkler system and fire system.Fire water supply system the normal working is building the people's life safety guarantee. Article introduces a real-time monitoring system the based on Internet of things technology building fire water pressure,Automatic sprinkler system and fire water system in Internal of building is monitored for all-weather 24hours, Achieving automatic monitoring and controlling automatic pump supplying water, also achieved Remote real-time supervision of building fire water pressure requirements.

  6. The Prospects Analysis of Internet of Things Technology Applied to Quality and Technical Supervision Business%物联网技术应用于质量技术监督业务的前景分析

    Institute of Scientific and Technical Information of China (English)

    张玲

    2011-01-01

    Following things as computers,the Internet,the world of information technology development,the third wave,the development of national science and technology has become an important part of the strategy.In this paper, Shaanxi Province,quality and technical supervision of information systems development status,for example,in terms of quality and technical supervision for the application of the business prospects of networking technology for the analysis.%物联网作为继计算机、互联网之后,世界信息化发展的第三次浪潮,已成为国家科技发展战略的重要组成部分。本文以陕西省质量技术监督系统的信息化发展现状为例,对于在质量技术监督业务中应用物联网技术的前景进行了分析。

  7. Transformation through expeditionary change using online learning and competence-building technologies

    Directory of Open Access Journals (Sweden)

    Donald M. Norris

    2011-12-01

    Full Text Available This paper presents a patterns-based model of the evolution of learning and competence-building technologies, grounded in examples of current practice. The model imagines five simple stages in how institutions use ‘expeditionary change' to innovate more nimbly. It builds upon three assertions. First, the pervasiveness of web-based knowledge-sharing in higher education's communities, observatories and social networks makes it easier to: introduce relevant technologies, find people doing similar things, learn from their experiences, find and collaborate with early adopters of learning technologies, hear about relevant innovations, and discover and exploit news of opportunities, threats and trends. Second, expeditionary change based on such knowledge-sharing facilitates transformations in: production functions for learning, roles of faculty and mentors, business models, patterns and cadences of interactivity, use of open resources, and the roles of learners. Third, those transformations make it easier for disruptive forms of higher education to emerge; for example, dynamically updated curricula that address emerging and important knowledge gaps, and thereby increase students' employability.

  8. Training program for energy conservation in new-building construction. Volume II. Energy conservation technology: for the building inspector

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-12-01

    A Model Code for Energy Conservation in New Building Construction has been developed by those national organizations primarily concerned with the development and promulgation of model codes. The technical provisions are based on ASHRAE Standard 90-75 and are intended for use by state and local officials. This training manual contains the basic information necessary to acquaint the field building inspector with the concepts of energy conservation in buildings and instructs him in the basic techniques of field inspection of energy compliance.

  9. Clinical Supervision in Denmark

    DEFF Research Database (Denmark)

    Jacobsen, Claus Haugaard

    Data fra den danske undersøgelse af psykoterapeuters faglige udvikling indsamlet ved hjælp af DPCCQ. Oplægget fokuserer på supervision (modtaget, givet, uddannelse i) blandt danske psykoterapeutiske arbejdende psykologer....

  10. Supervision af psykoterapi

    DEFF Research Database (Denmark)

    SUPERVISION AF PSYKOTERAPI indtager en central position i uddannelsen og udviklingen af psykoterapeuter. Trods flere lighedspunkter med psykoterapi, undervisning og konsultation er psykoterapisupervision et selvstændigt virksomhedsområde. Supervisor må foruden at være en trænet psykoterapeut kende...... supervisionens rammer og indplacering i forhold til organisation og samfund. En række kapitler drejer sig om supervisors opgaver, roller og kontrolfunktion, supervision set fra supervisandens perspektiv samt betragtninger over relationer og processer i supervision. Der drøftes fordele og ulemper ved de...... forskellige måder, hvorpå en sag kan fremlægges. Bogens første del afsluttes med refleksioner over de etiske aspekter ved psykoterapisupervision. Bogens anden del handler om de særlige forhold, der gør sig gældende ved supervision af en række specialiserede behandlingsformer eller af psykoterapi med bestemte...

  11. Psykoterapi og supervision

    DEFF Research Database (Denmark)

    Jacobsen, Claus Haugaard

    2014-01-01

    Kapitlet beskriver supervisionen funktioner i forhold til psykoterapi. Supervision af psykoterapi henviser i almindelighed til, at en psykoterapeut konsulterer en ofte mere erfaren kollega (supervisor) med henblik på drøftelse af et konkret igangværende psykoterapeutisk behandlingsforløb. Formålet...... er at fremme denne fagpersons (psykoterapeutens) faglige udvikling samt sikre kvaliteten af behandlingen.kan defineres som i. Der redegøres for, hvorfor supervision er vigtig del af psykoterapeutens profession samt vises, hvorledes supervision foruden den faglige udvikling også er vigtigt redskab i...... psykoterapiens kvalitetssikring. Efter at have drøftet nogle etiske forhold ved supervision, fremlægges endelig nogle få forskningsresultater vedr. psykoterapisupervision af danske psykologer....

  12. Supervision and group dynamics

    DEFF Research Database (Denmark)

    Hansen, Søren; Jensen, Lars Peter

    2004-01-01

    as well as at Aalborg University. The first visible result has been participating supervisors telling us that the course has inspired them to try supervising group dynamics in the future. This paper will explore some aspects of supervising group dynamics as well as, how to develop the Aalborg model...... An important aspect of the problem based and project organized study at Aalborg University is the supervision of the project groups. At the basic education (first year) it is stated in the curriculum that part of the supervisors' job is to deal with group dynamics. This is due to the experience...... that many students are having difficulties with practical issues such as collaboration, communication, and project management. Most supervisors either ignore this demand, because they do not find it important or they find it frustrating, because they do not know, how to supervise group dynamics...

  13. The potential for distributed generation in Japanese prototype buildings: A DER-CAM analysis of policy, tariff design, building energy use, and technology development (Japanese translation)

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Nan; Marnay, Chris; Firestone, Ryan; Gao, Weijun; Nishida, Masaru

    2004-10-15

    The August 2003 blackout of the northeastern U.S. and CANADA caused great economic losses and inconvenience to New York City and other affected areas. The blackout was a warning to the rest of the world that the ability of conventional power systems to meet growing electricity demand is questionable. Failure of large power systems can lead to serious emergencies. Introduction of on-site generation, renewable energy such as solar and wind power and the effective utilization of exhaust heat is needed, to meet the growing energy demands of the residential and commercial sectors. Additional benefit can be achieved by integrating these distributed technologies into distributed energy resource (DER) systems. This work demonstrates a method for choosing and designing economically optimal DER systems. An additional purpose of this research is to establish a database of energy tariffs, DER technology cost and performance characteristics, and building energy consumption for Japan. This research builds on prior DER studies at the Ernest Orlando Lawrence Berkeley National Laboratory (LBNL) and with their associates in the Consortium for Electric Reliability Technology Solutions (CERTS) and operation, including the development of the microgrid concept, and the DER selection optimization program, the Distributed Energy Resources Customer Adoption Model (DER-CAM). DER-CAM is a tool designed to find the optimal combination of installed equipment and an idealized operating schedule to minimize a site's energy bills, given performance and cost data on available DER technologies, utility tariffs, and site electrical and thermal loads over a test period, usually an historic year. Since hourly electric and thermal energy data are rarely available, they are typically developed by building simulation for each of six end use loads used to model the building: electric-only loads, space heating, space cooling, refrigeration, water heating, and natural-gas-only loads. DER-CAM provides a

  14. Technology of making healthy and correction of build of men of the first mature age

    Directory of Open Access Journals (Sweden)

    Stroganov S.V.

    2010-07-01

    Full Text Available Directions of search of ways of making healthy of population of mature age are considered. In an experiment 30 men took part 21-35 years. The men of experimental group conducted training on the basis of 4th of the monthly program of correction and making healthy. There was statistically meaningful divergence in the capacity of men of experimental group by comparison to the men of control group. Also in the subjective estimation of own build, feel for a day, at the end of workweek and after training. Employment on the developed technology induced the men of experimental group a greater measure to give up harmful habits.

  15. Multi-Instance Learning from Supervised View

    Institute of Scientific and Technical Information of China (English)

    Zhi-Hua Zhou

    2006-01-01

    In multi-instance learning, the training set comprises labeled bags that are composed of unlabeled instances,and the task is to predict the labels of unseen bags. This paper studies multi-instance learning from the view of supervised learning. First, by analyzing some representative learning algorithms, this paper shows that multi-instance learners can be derived from supervised learners by shifting their focuses from the discrimination on the instances to the discrimination on the bags. Second, considering that ensemble learning paradigms can effectively enhance supervised learners, this paper proposes to build multi-instance ensembles to solve multi-instance problems. Experiments on a real-world benchmark test show that ensemble learning paradigms can significantly enhance multi-instance learners.

  16. International Energy Agency Implementing Agreements and Annexes: A Guide for Building Technologies Program Managers

    Energy Technology Data Exchange (ETDEWEB)

    Evans, Meredydd; Runci, Paul; Meier, Alan

    2008-08-01

    This report presents results from a program evaluation of the U.S. Department of Energy?s Buildings Technologies Program (BTP) participation in collaborative international technology implementing agreements. The evaluation was conducted by researchers from the Pacific Northwest National Laboratory and the Lawrence Berkeley National Laboratory in the fall of 2007 and winter 2008 and was carried out via interviews with stakeholders in four implementing agreements in which BTP participates, reviews of relevant program reports, websites and other published materials. In addition to these findings, the report includes a variety of supporting materials such that aim to assist BTP managers who currently participate in IEA implementing agreements or who may be considering participation.

  17. Research on Key Technology of New Concept Tyre Building Production Line

    Directory of Open Access Journals (Sweden)

    Menglong Cao

    2012-07-01

    Full Text Available Tyre building production line gradually transits from stand-alone production to combined production mode. The transformation of work mode from traditional serial intermittent to the parallel continuous has been the key technology research of tire production enterprise. And intelligent robots and other automated equipment have been the first choice of the tyre enterprise’s production line. Considering the combination of the equipment between upper and lower processes in tyre production line, the manual operations in some processes replaced by intelligent robots will improve production efficiency of tyre production enterprise, and will make outstanding contribution in reduce process losses and reduce production costs. This article studies on the key technology of combined application in production line, and makes simulation comparison for the same technical process that using different scheme, to prove the priorities and superiorities of combined production line relatives to the traditional production mode.

  18. Two Approaches to Clinical Supervision.

    Science.gov (United States)

    Anderson, Eugene M.

    Criteria are established for a definition of "clinical supervision" and the effectiveness of such supervisory programs in a student teaching context are considered. Two differing genres of clinical supervision are constructed: "supervision by pattern analysis" is contrasted with "supervision by performance objectives." An outline of procedural…

  19. Counselor Supervision: A Consumer's Guide.

    Science.gov (United States)

    Yager, Geoffrey G.; Littrell, John M.

    This guide attempts to solve problems caused when a certain designated "brand" of supervision is forced on the counselor trainee with neither choice nor checklist of important criteria. As a tentative start on a guide to supervision the paper offers the following: a definition of supervision; a summary of the various types of supervision; a…

  20. Applications in Cross-Curriculum Teaching The Synthesis of the Design Studio and Building Technology Seminar

    Directory of Open Access Journals (Sweden)

    John Enright

    2012-09-01

    Full Text Available “Change or perish. You need to prepare yourself for a profession that you are notgoing to recognize a decade from now.”Thom Mayne, Remarks on building information modeling at the 2005 AIAConvention, Las Vegas, NVToday architects are faced with new challenges involving Integrated Project Delivery and associated digital technologies that are rapidly changing the way architects work. Collaboration is the key to this newway of working as architects discover that the management of buildinginformation requires new skills and methods in design.How do educators respond to this call? How do we prepare a futuregeneration of architects to thrive within a rapidly changing profession?Given these new models for project delivery currently being utilized by theprofession, a new pair of courses was created at the Southern CaliforniaInstitute of Architecture (SCI_Arc for the integration of the designcurricula with a building technology course by emphasizing teamworkand the use of three-dimensional software. The aim was to develop newskill-sets for students while maintaining a deep understanding of designand built form. Educators have long struggled with traditional architectural curricula that inherently separate design and technology courses. This bifurcation, often times convenient and useful for the organization of aschool and curriculum, is of course at odds with the “comprehensive” nature of architectural education that is so strived for in most programs.This paper serves to show examples of an attempt to address this seriousissue within the first professional graduate school curriculum (3 1/2 yearM.ARCH by bridging both the second year design and technology classesover a two semester span. The goals of the two courses were; to bridgethe gap between design and technology pedagogy, develop collaborativetools for students, investigate a comprehensive understanding of theintegration of building systems, and to finally produce a set of documentsthat

  1. Raise the Efficiency of Auditing and Supervision of Medical Insurance with Information Technology%利用信息技术提升医保稽核监管效能

    Institute of Scientific and Technical Information of China (English)

    陈励阳

    2013-01-01

    Rapid advancement in universal healthcare have brought about the urgent need for strengthened supervision in order to ensure the security and efficient use of funds. Especially with the shift towards "quality care"in development .We have no choice but to build a timely, efficient, and accurate informatization system for auditing and supervision. This system must be matched with a professional auditing team and personnel management system.%  突飞猛进的全民医保事业特别是转变发展方式、建设“质量医保”的要求,迫切需要加强医保监管,以确保基金安全和充分发挥其使用效率。而建设满足实时性、高效性、准确性和为决策服务的信息化稽核监管系统已成为我们的必然选择。医保稽核监管系统建设要与稽核队伍的专业化、人员编制等相匹配。

  2. Building tomorrow's nuclear power plants with 4{sup +}D VR technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Il S.; Yoon, Sang H.; Shim, Kyu W.; Yu, Yong H.; Suh, Kune Y. [PhiloSOPhIA, Inc., Seoul (Korea, Republic of)

    2002-04-15

    There continues to be an increasing demand of electricity around the globe to fuel the industrial growth and to promote the human welfare. The economic activities have brought about richness in our material and cultural lives, in which process the electric power has been at the heart of the versatile energy sources. In order to timely and competitively respond to rapidly changing energy environment in the twenty-first century there is a growing need to build the advanced nuclear power plants in the unlimited workspace of virtual reality (VR) prior to commissioning. One can then realistically evaluate their construction time and cost per varying methods and options available from the leading-edge technology. In particular a great deal of efforts have yet to be made for time- and cost-dependent plant simulation and dynamically coupled database construction in the VR space. The operator training and personnel education may also benefit from the VR technology. The present work is being proposed in the three-dimensional space and time plus cost coordinates, i. e. four plus dimensional (4{sup +}D) coordinates. The 4{sup +}D VR application will enable the nuclear industry to narrow the technological gap from the other leading industries that have long since been employing the VR engineering. The 4{sup +}D technology will help nurture public understanding of the special discipline of nuclear power plants. The technology will also facilitate public access to the knowledge on the nuclear science and engineering which has so far been monopolized by the academia, national laboratories and the heavy industry. The 4{sup +}D virtual design and construction will open up the new horizon for revitalization of the nuclear industry over the globe in the foreseeable future. Considering the long construction and operation time for the nuclear power plants, the preliminary VR simulation capability for the plants will supply the vital information not only for the actual design and

  3. Construction Process Simulation and Safety Analysis Based on Building Information Model and 4D Technology

    Institute of Scientific and Technical Information of China (English)

    HU Zhenzhong; ZHANG Jianping; DENG Ziyin

    2008-01-01

    Time-dependent structure analysis theory has been proved to be more accurate and reliable com-pared to commonly used methods during construction. However, so far applications are limited to partial pe-riod and part of the structure because of immeasurable artificial intervention. Based on the building informa-tion model (BIM) and four-dimensional (4D) technology, this paper proposes an improves structure analysis method, which can generate structural geometry, resistance model, and loading conditions automatically by a close interlink of the schedule information, architectural model, and material properties. The method was applied to a safety analysis during a continuous and dynamic simulation of the entire construction process.The results show that the organic combination of the BIM, 4D technology, construction simulation, and safety analysis of time-dependent structures is feasible and practical. This research also lays a foundation for further researches on building lifecycle management by combining architectural design, structure analy-sis, and construction management.

  4. Native American Women Leaders' Use of Information and Communication Technologies (ICTs) for Work-Life Balance (WLB) and Capacity Building

    Science.gov (United States)

    Jensen, Crystal C.

    2013-01-01

    Native American women's leadership, information communication technologies (ICTs), work-life balance (WLB) and human capacity building (HCB) are grounded in social justice issues due to their long history of overall cultural decimation, inequitable access to technology, monetary resources, and social power (agency), and influence. Currently, there…

  5. Native American Women Leaders' Use of Information and Communication Technologies (ICTs) for Work-Life Balance (WLB) and Capacity Building

    Science.gov (United States)

    Jensen, Crystal C.

    2013-01-01

    Native American women's leadership, information communication technologies (ICTs), work-life balance (WLB) and human capacity building (HCB) are grounded in social justice issues due to their long history of overall cultural decimation, inequitable access to technology, monetary resources, and social power (agency), and influence. Currently, there…

  6. Building heating technology in Smart Home using PI System management tools

    Directory of Open Access Journals (Sweden)

    Jan Vanus

    2016-03-01

    Full Text Available For comfortable remote monitoring of some operational and technical functions inside own Smart Home building, it is possible to use a lot of useful programmes and tools. However, not each programme or tool is suited to this purpose, or it does not offer required functionality. The aim of this paper is to describe using an appropriate software tool of PI System for a real-time monitoring of acquired data from real technology parts located at a training centre of the Moravian-Silesian Wood Cluster. Then a superior system including applications of PI Coresight and PI ProcessBook is used for analysis and processing of these acquired data (e.g. by using the Dynamic Time Warping method for specific technological quantities. Each application has own advantages and disadvantages, which are evaluated in conjunction with possibilities of manipulating the data. In an experimental part, there are also applied a technological communication standard of BACnet to controlling heating, cooling and forced ventilation, and a software tool of DESIGO Insight for visualising the data in forms of tables, multi-layer graphs, and screens for a certain technology.

  7. Life Cycle Assessment of Flat Roof Technologies for Office Buildings in Israel

    Directory of Open Access Journals (Sweden)

    Svetlana Pushkar

    2016-01-01

    Full Text Available The goal of the current study was to evaluate the environmental damage from three flat roof technologies typically used in Israel: (i concrete, (ii ribbed slab with concrete blocks, and (iii ribbed slab with autoclaved aerated blocks. The roofs were evaluated using the Life Cycle Assessment (LCA methodology. The Production and Construction (P and C, Operational Energy (OE, and Maintenance to Demolition (MtoD stages were considered. The roofs were modeled based on an office building module located in the four climate zones of Israel, and the hierarchical ReCiPe2008 Life Cycle Impact Assessment (LCIA method was applied. The percent difference of one, which is the default methodological option of ReCiPe2008, and an ANOVA of the six methodological options of ReCiPe2008 were used. The results revealed that (i in a hot climate, the best roof technology can be selected by considering only the OE stage, whereas in a mild climate, both the OE and P and C stages must be considered; (ii in a hot climate, the best roof technology is a concrete roof, but in a mild climate, the best options are ribbed slab roofs with concrete blocks and autoclaved aerated blocks; and (iii the conjugation of ReCiPe2008 with a two-stage nested ANOVA is the appropriate approach to evaluate the differences in environmental damage in order to compare flat roof technologies.

  8. North House : developing intelligent building technology and user interface in energy independent domestic environments

    Energy Technology Data Exchange (ETDEWEB)

    Velikov, K. [Waterloo Univ., Cambridge, ON (Canada). School of Architecture; Bartram, L. [Simon Fraser Univ., Surrey, BC (Canada). School of Interactive Arts and Technology

    2009-07-01

    This paper reported on the construction of the North House, a prototype solar-powered dwelling developed by a Canadian team for the 2009 Solar Decathlon. The prototype aims to develop a strategy for solar powered residential design that addresses the issues of how to build and live in the demanding northern context, how to design buildings that are adaptive to climate extremes and how new technologies and alternative energies can be used to create a viable and sustainable architecture. The occupant-focused design is meant to empower the occupants with both knowledge and control so that they can make intelligent choices and transform their own habits to live more sustainably. The residential occupant needs to operate as both user and manager of a green dwelling, and therefore requires specific information as well as access to help the building work more efficiently. The domestic environment is different from a workplace environment and therefore requires a unique means of control, display and integration with user lifestyle. The Adaptive Living Interface System for North House is based on interactive technologies that help occupants to both control the systems of the house while providing feedback on the operation of the house. The objective is to support behavioural transformation for energy saving living patterns. Once the competition is over, the North House will be reinstalled in Canada to undergo a minimum of 2 years of post-occupancy evaluation (POE) and testing. Both quantitative and qualitative data will be collected on energy performance, user livability, comfort and user satisfaction. Results were be measured against performance simulation during the design phase and will be used to provide feedback on simulation software. 11 refs., 5 figs.

  9. Distance Supervision in Rehabilitation Counseling: Ethical and Clinical Considerations

    Science.gov (United States)

    Lund, Emily M.; Schultz, Jared C.

    2015-01-01

    Background: The use of technology-mediated distance supervision is a rapidly growing area in rehabilitation counseling and other fields. Distance supervision has both tremendous potential and notable challenges to address, including questions of ethics and evidence. Purpose: This article examines both the ethical and nonethical principles that…

  10. Miles Apart: Two Art Therapists' Experience of Distance Supervision

    Science.gov (United States)

    Brandoff, Rachel; Lombardi, Reina

    2012-01-01

    Distance supervision (or "telesupervision") is a significant and growing trend in health care professions, but it requires advanced planning, ongoing discussion, and investment in technology by both parties in order to be an effective and ethical alternative to traditional face-to-face supervision. This viewpoint presents the perspectives of two…

  11. The Application Trend of Smart Sensing Technology in Home of Building: An Example of a Green and Smart Building for the Seniors Citizens Offered by Farglory Land Development

    Directory of Open Access Journals (Sweden)

    Meng-Hsien Hsieh

    2011-09-01

    Full Text Available The living space of smart buildings requires three major applications: energy-saving and comfort, security and hazard prevention, and health care. These applications not only give rise to a market opportunity for advanced sensor fusion technologies including comfort sensing, infrared sensing, inertial sensing, and voice recognition, but also make proactive sensing, smart determination, and automatic control possible. The smart building project by Farglory Land Development, where senior citizens are able to live comfortably and be well taken care of, is presented here. The current trends visible from this project are also discussed.

  12. Models for Building Knowledge in a Technology-Rich Setting: Teacher Education

    Directory of Open Access Journals (Sweden)

    Gregory MacKinnon

    2009-09-01

    Full Text Available Technology offers promising opportunities for creating new types of classroom learning environments. This paper describes three technology models used by teacher education interns: electronic portfolios, negotiative concept mapping, cognote-supported electronic discussions. As implemented in the current study, these models invoke graduated attributes of knowledge building and as such serve as a useful continuum of examples of the potential of technology to assist in promoting progressive knowledge construction. A description of the models is followed by a discussion of the relationship of these classrooms to Knowledge-Building principles. Résumé La technologie offre des possibilités prometteuses pour la création de nouveaux types d’environnements d’apprentissage en classe. Le présent article décrit trois modèles technologiques utilisés par les stagiaires en enseignement : portfolios électroniques, cartographie conceptuelle de négociation, discussions électroniques avec codage. Tels que mis en œuvre dans le cadre de la présente étude, ces modèles font appel à des attributs hiérarchiques de coélaboration des connaissances et constituent donc en eux-mêmes un continuum utile d’exemples illustrant comment la technologie peut aider à encourager l’élaboration progressive des connaissances. Une description des modèles est suivie d’une discussion portant sur la relation de ces classes avec les principes de coélaboration des connaissances.

  13. Computer Monitor Supervision: A Clinical Note.

    Science.gov (United States)

    Scherl, Charles R.; Haley, Jay

    2000-01-01

    Presents communication procedures for supervisors and therapy trainees that have been developed as a result of the use of computer technology. Using the computer as a supervision tool, therapy can be influenced by the supervisor while minimizing disruption. Successes and pitfalls in a master's level practicum course in family therapy are…

  14. Computer Monitor Supervision: A Clinical Note.

    Science.gov (United States)

    Scherl, Charles R.; Haley, Jay

    2000-01-01

    Presents communication procedures for supervisors and therapy trainees that have been developed as a result of the use of computer technology. Using the computer as a supervision tool, therapy can be influenced by the supervisor while minimizing disruption. Successes and pitfalls in a master's level practicum course in family therapy are…

  15. Doctoral Supervision in Virtual Spaces: A Review of Research of Web-Based Tools to Develop Collaborative Supervision

    Science.gov (United States)

    Maor, Dorit; Ensor, Jason D.; Fraser, Barry J.

    2016-01-01

    Supervision of doctoral students needs to be improved to increase completion rates, reduce attrition rates (estimated to be at 25% or more) and improve quality of research. The current literature review aimed to explore the contribution that technology can make to higher degree research supervision. The articles selected included empirical studies…

  16. Resistance to group clinical supervision

    DEFF Research Database (Denmark)

    Buus, Niels; Delgado, Cynthia; Traynor, Michael

    2017-01-01

    This present study is a report of an interview study exploring personal views on participating in group clinical supervision among mental health nursing staff members who do not participate in supervision. There is a paucity of empirical research on resistance to supervision, which has traditiona......This present study is a report of an interview study exploring personal views on participating in group clinical supervision among mental health nursing staff members who do not participate in supervision. There is a paucity of empirical research on resistance to supervision, which has...... traditionally been theorized as a supervisee's maladaptive coping with anxiety in the supervision process. The aim of the present study was to examine resistance to group clinical supervision by interviewing nurses who did not participate in supervision. In 2015, we conducted semistructured interviews with 24...

  17. Evaluation of a Mixed Method Approach for Studying User Interaction with Novel Building Control Technology

    Directory of Open Access Journals (Sweden)

    Birgit Painter

    2016-03-01

    Full Text Available Energy-efficient building performance requires sophisticated control systems that are based on realistic occupant behaviour models. To provide robust data for the development of these models, research studies in real-world settings are needed. Yet, such studies are challenging and necessitate careful design in terms of data collection methods and procedures. This paper describes and critiques the design of a mixed methods approach for occupant behaviour research. It reviews the methodology developed for a longitudinal study in a real-world office environment where occupants’ experience with a novel facade technology (electrochromic glazing was investigated. The methodology integrates objective physical measurements, observational data and self-reported experience data. Using data from one day of the study, this paper illustrates how the different sources can be combined in order to derive an in-depth understanding of the interplay between external daylight conditions, characteristics of the facade technology, occupant interaction with the technology and the resulting occupant experience. It was found that whilst the individual methods may be affected by practical limitations, these can be partially offset by combining physical measurements and observations with self-reported data. The paper critically evaluates the individual techniques, as well as the benefits of their integration and makes recommendations for the design of future occupant behaviour studies in real-world settings.

  18. Building with Straw.

    Science.gov (United States)

    Di Santo, Gilbert

    2000-01-01

    Discusses the early use of straw in Africa and Europe as a building material. Provides background information and a basic framework for the straw bale project, and recommends supervision for young students. Lists objectives for building a straw bale bench and provides the building instructions which consist of three sessions. Includes four…

  19. Regional characteristics of individual housing units in Serbia from the aspect of applied building technologies

    Directory of Open Access Journals (Sweden)

    Jovanović-Popović Milica

    2014-01-01

    Full Text Available Individual housing units in Serbia have been studied from the aspect of applied technical solutions. Analyzed data have been collected during a field research in accordance with the current administrative regional division, and they represent a basis for definition of regional typology of individual housing units. Characteristic types of objects of each region’s typology have been further analyzed. Upon these analyses regional characteristics of individual housing units regarding applied construction types, building technologies and materials have been defined and presented. [Projekat Ministarstva nauke Republike Srbije, br. TR 36034: Investigation and Systematization of Serbian Housing in Context of Globalization and European Integration in the Framework of Quality and Living-Standard Improvement

  20. Power generation from thermoelectric system-embedded Plexiglas for green building technology

    KAUST Repository

    Inayat, Salman Bin

    2012-06-09

    Thermoelectric materials embedded through or inside exterior glass windows can act as a viable source of supplemental power in geographic locations where hot weather dominates. This thermoelectricity is generated because of the thermal difference between the high temperature outside and the relatively cold temperature inside. Using physical vapor deposition process, we experimentally verify this concept by embedding bismuth telluride and antimony telluride through the 5 mm Plexiglas to demonstrate 10 nW of thermopower generation with a temperature gradient of 21 °C. Albeit tiny at this point with non-optimized design and development, this concept can be extended for relatively large-scale power generation as an additional power supply for green building technology.

  1. Power generation from thermoelectric system-embedded Plexiglas for green building technology

    Science.gov (United States)

    Inayat, Salman Bin; Hussain, Muhammad Mustafa

    2013-08-01

    Thermoelectric materials embedded through or inside exterior glass windows can act as a viable source of supplemental power in geographic locations where hot weather dominates. This thermoelectricity is generated because of the thermal difference between the high temperature outside and the relatively cold temperature inside. Using physical vapor deposition process, we experimentally verify this concept by embedding bismuth telluride and antimony telluride through the 5 mm Plexiglas to demonstrate 10 nW of thermopower generation with a temperature gradient of 21 °C. Albeit tiny at this point with non-optimized design and development, this concept can be extended for relatively large-scale power generation as an additional power supply for green building technology.

  2. Impact of the FY 2009 Building Technologies Program on United States Employment and Earned Income

    Energy Technology Data Exchange (ETDEWEB)

    Livingston, Olga V.; Scott, Michael J.; Hostick, Donna J.; Dirks, James A.; Cort, Katherine A.

    2008-06-17

    The Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE) is interested in assessing the potential economic impacts of its portfolio of subprograms on national employment and income. A special purpose input-output model called ImSET is used in this study of 14 Building Technologies Program subprograms in the EERE final FY 2009 budget request to the Office of Management and Budget in February 2008. Energy savings, investments, and impacts on U.S. national employment and earned income are reported by subprogram for selected years to the year 2025. Energy savings and investments from these subprograms have the potential of creating a total of 258,000 jobs and about $3.7 billion in earned income (2007$) by the year 2025.

  3. Lurgi MegaMethanol technology. Delivering the building blocks for the future fuel and monomer demand

    Energy Technology Data Exchange (ETDEWEB)

    Wurzel, T. [Lurgi AG, Frankfurt/Main (Germany)

    2006-07-01

    The paper describes the central role of methanol within a changing environment with respect to feedstock availability as well as steadily growing demand in fuel and monomer demand. The current large-scale production facilities are described with respect to the technological challenges in order to ensure the availability of sufficient methanol for down-stream applications. Different down-stream applications are described which clearly confirm that methanol is the dominant C1-building block due to its chemical flexibility. It is concluded that by means of the implementation of two MTP (Methanol to Propylene) projects in China initiated the era of ''down-stream methanol'' has begun in the industry. (orig.)

  4. Group Supervision Attitudes: Supervisory Practices Fostering Resistance to Adoption of Evidence-Based Practices.

    Science.gov (United States)

    Brooks, Charles T; Patterson, David A; McKiernan, Patrick M

    2012-01-01

    The focus of this study was to qualitatively evaluate worker's attitudes about clinical supervision. It is believed that poor attitudes toward clinical supervision can create barriers during supervision sessions. Fifty-one participants within a social services organization completed an open-ended questionnaire regarding their clinical supervision experiences. Results suggest four key areas which appear to be strong factors in workers' experiences and attitudes regarding group supervision: a. facilitator's skill level; b. creativity; c. utilization of technology; and d. applicability. For organizations interested in overcoming potential barriers to adopting best practices, effectively addressing workers' negative attitudes toward group supervision would be a worthy endeavor.

  5. Collective academic supervision

    DEFF Research Database (Denmark)

    Nordentoft, Helle Merete; Thomsen, Rie; Wichmann-Hansen, Gitte

    2013-01-01

    are interconnected. Collective Academic Supervision provides possibilities for systematic interaction between individual master students in their writing process. In this process they learn core academic competencies, such as the ability to assess theoretical and practical problems in their practice and present them...

  6. Reflecting reflection in supervision

    DEFF Research Database (Denmark)

    Lystbæk, Christian Tang

    Reflection has moved from the margins to the mainstream in supervision. Notions of reflection have become well established since the late 1980s. These notions have provided useful framing devices to help conceptualize some important processes in guidance and counseling. However, some applications...

  7. Clinical Supervision in Denmark

    DEFF Research Database (Denmark)

    Jacobsen, Claus Haugaard

    2011-01-01

    on giving and receiving clinical supervision as reported by therapists in Denmark. Method: Currently, the Danish sample consists of 350 clinical psychologist doing psychotherapy who completed DPCCQ. Data are currently being prepared for statistical analysis. Results: This paper will focus primarily...

  8. Kontraktetablering i supervision

    DEFF Research Database (Denmark)

    Mortensen, Karen Vibeke; Jacobsen, Claus Haugaard

    2007-01-01

    Kapitlet behandler kontraktetablering i supervision, et element, der ofte er blevet negligeret eller endog helt forbigået ved indledningen af supervisionsforløb. Sikre aftaler om emner som tid, sted, procedurer for fremlæggelse, fortrolighed, ansvarsfordeling og evaluering skaber imidlertid tryghed...

  9. Etiske betragtninger ved supervision

    DEFF Research Database (Denmark)

    Jacobsen, Claus Haugaard; Agerskov, Kirsten

    2007-01-01

    Kapitlet præsenterer nogle etiske betragtninger ved supervision. Mens der længe har eksisteret etiske retningslinjer for psykoterapeutisk arbejde, har der overraskende nok manglet tilsvarende vejledninger på supervisionsområdet. Det betyder imidlertid ikke, at de ikke er relevante. I kapitlet gøres...

  10. Indicator system of energy efficient technologies evaluation of residential buildings in hot summer and cold winter regions of China

    Institute of Scientific and Technical Information of China (English)

    夏煦

    2014-01-01

    The related existing energy saving index system of buildings is deficient in direction, index coverage, depth, and technological and economic considerations. Aiming at the deficient existing research and with the advancement of energy saving of buildings in China from northern heating regions to southern hot summer and cold winter regions, selecting residential buildings in hot summer and cold winter regions as the research object, and through much evaluation index reference and repeated demonstrations and the borrowing of literature research home and abroad and relevant energy saving standards, filters and eliminates energy efficient technologies evaluation indexes according to the design principle of index system, the factors influencing the energy saving of residential buildings are evaluated, index system weight is established by adopting analytic hierarchy process, and finally the evaluation index system of energy saving technologies of residential buildings in hot summer and cold winter area of China is established. Each target layer includes five standard layer indexes and sixteen index layer indexes. The standard layer of evaluation index, namely primary indexes, includes the technological, energy saving effect, economic, environmental, and social indexes. The secondary indexes are selected based on the principles of concision, comprehensiveness, representativeness and operability.

  11. Study on the Construction Stage Quality Supervision of Building Installation Engineering%建筑安装工程施工阶段工程质量监理研究

    Institute of Scientific and Technical Information of China (English)

    姜正亚

    2013-01-01

    安装工程施工过程质量监理的关键就是要加强对工序质量的控制。文章对建筑安装工程施工阶段工程质量监理程序、任务、依据等做了简单阐述,重点讨论了建筑安装工程施工阶段工程质量监理的方法。%The key of instal ation quality supervision in con-struction process is to strengthen the control of process quality. The article does a simple exposition on the engineering quality supervision program, task, basis of engineering instal ation sta-ge, discusses the methods of construction installation project quality supervision in construction stage.

  12. Solid Waste Characterization and Recycling Potential for University Technology PETRONAS Academic Buildings

    Directory of Open Access Journals (Sweden)

    Amirhossein Malakahmad

    2010-01-01

    Full Text Available Problem statement: In many countries such as Malaysia, it is increasingly more difficult to find suitable locations for landfills, which are accepted by the population. These circumstances are to be found all over the world and make new strategies for waste management necessary. Approach: Integrated Solid Waste Management (ISWM systems are one of the greatest challenges for sustainable development. But for any ISWM system to be successful, the first step is to carry out waste characterization studies. Therefore, the study was conducted to characterize the quality and quantity of generated solid waste at University Technology PETRONAS (UTP academic buildings to suggest a recycling system with emphasis on recycling container size and arrangement. Results: Initially, a survey was conducted to highlight the existing situation of recycling activities and recycle bins condition in the campus. Then, six different sampling points were selected at campus academic complex and solid waste from those points was characterized for both term-time and semester break periods. Procedure of sampling involved unloading and analyzing a quantity of produced daily waste at each building in a controlled area. The integrity of all received waste was maintained regardless of the odor or physical decay. While survey outcomes shows that 80% of students and staff were interested to take part in recycling activities only 53% of them have practiced in it and the main reasons were that 75 and 83% of them could not find suitable and enough number of recycle bin, respectively. In another development it was obtained that up to 80% of produced materials at academic building are recyclable while paper percentage is predominant with 40% and 33% during term-time and semester break, respectively. Food waste was detected in all samples which could lead cross contamination, value drop and development of odor and flies. The solid waste generation was varied between 8

  13. Considerations of Building up a Supervision and Management System for Prevention and Control of Invasive Alien Species Posing Environmental Hazards in China%关于构建我国外来入侵物种环境危害防控监督管理体系的思考

    Institute of Scientific and Technical Information of China (English)

    丁晖; 马方舟; 吴军; 雷军成; 乐志芳; 徐海根

    2015-01-01

    外来入侵物种是造成全球生物多样性丧失的主要威胁因素,我国是世界上受外来入侵物种危害最严重的国家之一。近年来,我国外来入侵物种的发生态势出现重大变化,呈现出许多新特点,但现行管理制度不健全,管理策略不完善,技术支撑薄弱,管理能力不强。要建立以环境危害防控为目标的管理体系,形成“引进—建立种群—传播扩散—发生危害”过程中的“无缝”监管,提高防控措施的技术水平和综合运用能力。研究提出了与此相适应的管理框架、管理目标、管理范围、管理对象、基本原则、主要制度和措施,初步形成了我国外来入侵物种环境危害防控监督管理体系的构建方案。%Invasive alien species are major threats to biodiversity at the global level. China is among the countries most af⁃fected by invasive alien species. Especially in recent years, the situation has changed greatly, displaying a number of new characteristics. In coping with the changing situation, it is found that the governance system is incomplete, management strategy imperfect, technological support inadequate and management capacity insufficient in the country. It is, therefore, essential and critical to build up an environment⁃hazard⁃control⁃oriented holistic governance system, a“seamless” supervi⁃sion network over the entire process of“introduction⁃population⁃establishment⁃dissimilation and proliferation⁃hazard forma⁃tion”, and a set of control measures high in technical level and comprehensive applicability. To address the issue, a holis⁃tic governance system is brought forth, that including framework, targets, scope, objects, fundamental principles, main institutions and measures, which tentatively form a program for building up a supervision and management system for pre⁃vention and control of invasive alien species posing environmental hazards.

  14. DEVELOPMENT OF RHEOLOGY OF ROAD-BUILDING MATERIALS FOR PERFECTION OF THEIR COMPACTION TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Vl. P. Podolskу

    2012-04-01

    Full Text Available Problem statement. The main problems of improving the quality and effectiveness of compaction of soil subgrade and road asphalt mixtures are discussed. Technology of road-building materials compaction can be improved by developing and using the rheological approach in the describing and studying changes in physical and mechanical parameters of materials, when the rheological properties of compacted material is closely connected to the nature of a force action applied to it.Results. The principles of designing rheological models of soil subgrade and road asphalt mixtures are formulated, based on which a model is suggested of the creep process of road construction materials using the theory of hereditary creep of elastic-visco-plastic materials. The choice of exponential and power influence functions is explained, the application of which will improve the accuracy of the physical and mechanical properties of compacted materials. Conclusions. Development of rheology road soils and asphalt mixtures reveals significant new laws in the development of deformation of compacted layers of road construction materials in the way of improving the compaction technology.

  15. The collaborative model of fieldwork education: a blueprint for group supervision of students.

    Science.gov (United States)

    Hanson, Debra J; DeIuliis, Elizabeth D

    2015-04-01

    Historically, occupational therapists have used a traditional one-to-one approach to supervision on fieldwork. Due to the impact of managed care on health-care delivery systems, a dramatic increase in the number of students needing fieldwork placement, and the advantages of group learning, the collaborative supervision model has evolved as a strong alternative to an apprenticeship supervision approach. This article builds on the available research to address barriers to model use, applying theoretical foundations of collaborative supervision to practical considerations for academic fieldwork coordinators and fieldwork educators as they prepare for participation in group supervision of occupational therapy and occupational therapy assistant students on level II fieldwork.

  16. Study on risk management for the implementation of energy efficient and renewable technologies in green office buildings

    Energy Technology Data Exchange (ETDEWEB)

    Mosly, I., E-mail: ibrahim.mosly@hotmail.com; Zhang, G., E-mail: kevin.Zhang@rmit.edu.au [RMIT University, Melbourne, Victoria (Australia). School of Civil, Environmental and Chemical Engineering

    2010-07-01

    Sustainability is becoming an important subject these days in many countries around the world. This is mainly due to increasing governmental and public awareness about reducing the impacts of climate change on our environment. Green buildings are able to reduce greenhouse gas emissions and consumption of natural resources. Reducing either water or energy consumption is achieved in green buildings with the aid of certain types of advanced technologies. This is done in order to help these buildings become more environmentally friendly. Unfortunately, these technologies are relatively new and may present a number of risks during various phases of their lifecycles, affecting different project stakeholders. This paper will focus on the risks of energy efficient and renewable technologies (EERTs), which are mainly implemented in green office buildings. These risks are divided into four categories: heating, ventilating and air conditioning (HVAC), lighting, solar, and wind. It will present a comprehensive review of a number of risks pertaining to the application of EERTs. Furthermore, it will emphasize the need to create a risk management framework for EERTs implemented in green office buildings due to the current lack of research carried out to investigate and treat these potential risks.

  17. Y-12 Plant decontamination and decommissioning technology logic diagram for Building 9201-4. Volume 3: Technology evaluation data sheets; Part A: Characterization, dismantlement

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    The Y-12 Plant Decontamination and Decommissioning Technology Logic Diagram for Building 9201-4 (TLD) was developed to provide a decision-support tool that relates decontamination and decommissioning (D and D) problems at Bldg. 9201-4 to potential technologies that can remediate these problems. The TLD uses information from the Strategic Roadmap for the Oak Ridge Reservation, the Oak Ridge K-25 Site Technology Logic Diagram, the Oak Ridge National Laboratory Technology Logic Diagram, and a previous Hanford logic diagram. This TLD identifies the research, development, demonstration, testing, and evaluation needed for sufficient development of these technologies to allow for technology transfer and application to D and D and waste management (WM) activities. It is essential that follow-on engineering studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologies identified in the TLD and by finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk. This report consists of the characterization and dismantlement data sheets.

  18. 谈居民建筑的节能技术%Study on energy efficiency technologies for residential buildings

    Institute of Scientific and Technical Information of China (English)

    王鹰

    2015-01-01

    对民用建筑节能存在的问题进行了研究,并对建筑外墙、外门、外窗、屋顶等节能技术措施作了阐述,总结了住宅工程建筑节能的控制要点,以促进节能技术的推广应用,实现社会经济的可持续发展。%The paper researches civil building energy-saving problems,illustrates energy-saving technology measures of external building wall, door,external window and roof and so on,and summarizes residential engineering building energy-saving control points,with a view to promote energy-saving technology and realize sustainable economic social development.

  19. Technological Supports for Onsite and Distance Education and Students' Perceptions of Acquisition of Thinking and Team-Building Skills

    Science.gov (United States)

    Thomas, Jennifer D. E.; Morin, Danielle

    2010-01-01

    This paper compares students' perceptions of support provided in the acquisition of various thinking and team-building skills, resulting from the various activities, resources and technologies (ART) integrated into an upper level Distributed Computing (DC) course. The findings indicate that students perceived strong support for their acquisition…

  20. The potential for distributed generation in Japanese prototype buildings: A DER-CAM analysis of policy, tariff design, building energy use, and technology development (English Version)

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Nan; Marnay, Chris; Firestone, Ryan; Gao, Weijun; Nishida, Masaru

    2004-10-15

    The August 2003 blackout of the northeastern U.S. and CANADA caused great economic losses and inconvenience to New York City and other affected areas. The blackout was a warning to the rest of the world that the ability of conventional power systems to meet growing electricity demand is questionable. Failure of large power systems can lead to serious emergencies. Introduction of on-site generation, renewable energy such as solar and wind power and the effective utilization of exhaust heat is needed, to meet the growing energy demands of the residential and commercial sectors. Additional benefit can be achieved by integrating these distributed technologies into distributed energy resource (DER) systems. This work demonstrates a method for choosing and designing economically optimal DER systems. An additional purpose of this research is to establish a database of energy tariffs, DER technology cost and performance characteristics, and building energy consumption for Japan. This research builds on prior DER studies at the Ernest Orlando Lawrence Berkeley National Laboratory (LBNL) and with their associates in the Consortium for Electric Reliability Technology Solutions (CERTS) and operation, including the development of the microgrid concept, and the DER selection optimization program, the Distributed Energy Resources Customer Adoption Model (DER-CAM). DER-CAM is a tool designed to find the optimal combination of installed equipment and an idealized operating schedule to minimize a site's energy bills, given performance and cost data on available DER technologies, utility tariffs, and site electrical and thermal loads over a test period, usually an historic year. Since hourly electric and thermal energy data are rarely available, they are typically developed by building simulation for each of six end use loads used to model the building: electric-only loads, space heating, space cooling, refrigeration, water heating, and natural-gas-only loads. DER-CAM provides a

  1. The potential for distributed generation in Japanese prototype buildings: A DER-CAM analysis of policy, tariff design, building energy use, and technology development (English Version)

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Nan; Marnay, Chris; Firestone, Ryan; Gao, Weijun; Nishida, Masaru

    2004-10-15

    The August 2003 blackout of the northeastern U.S. and CANADA caused great economic losses and inconvenience to New York City and other affected areas. The blackout was a warning to the rest of the world that the ability of conventional power systems to meet growing electricity demand is questionable. Failure of large power systems can lead to serious emergencies. Introduction of on-site generation, renewable energy such as solar and wind power and the effective utilization of exhaust heat is needed, to meet the growing energy demands of the residential and commercial sectors. Additional benefit can be achieved by integrating these distributed technologies into distributed energy resource (DER) systems. This work demonstrates a method for choosing and designing economically optimal DER systems. An additional purpose of this research is to establish a database of energy tariffs, DER technology cost and performance characteristics, and building energy consumption for Japan. This research builds on prior DER studies at the Ernest Orlando Lawrence Berkeley National Laboratory (LBNL) and with their associates in the Consortium for Electric Reliability Technology Solutions (CERTS) and operation, including the development of the microgrid concept, and the DER selection optimization program, the Distributed Energy Resources Customer Adoption Model (DER-CAM). DER-CAM is a tool designed to find the optimal combination of installed equipment and an idealized operating schedule to minimize a site's energy bills, given performance and cost data on available DER technologies, utility tariffs, and site electrical and thermal loads over a test period, usually an historic year. Since hourly electric and thermal energy data are rarely available, they are typically developed by building simulation for each of six end use loads used to model the building: electric-only loads, space heating, space cooling, refrigeration, water heating, and natural-gas-only loads. DER-CAM provides a

  2. A Comparative Study of the Use of Affective Markers in Supervision Comments: Case of Native versus Non-Native Supervision Comments

    Science.gov (United States)

    Ashtarian, Soroor; Weisi, Hiwa

    2016-01-01

    Investigating supervision comments, as a form of interaction between the teacher and the learner, is an area of research that has received little attention so far in spite of being crucial in creating an atmosphere of friendship and confidence-building. Previous research in this area has emphasized the role of affect in supervision comments in…

  3. Participants in the “Schweizer Jugendforscht’” projects at CERN under the supervision of Günther Dissertori, professor at the Swiss Federal Institute of Technology (ETH Zürich) and other members of ETH Zürich, Werner Lustermann and Michael Dittmar.

    CERN Multimedia

    2005-01-01

    Participants in the “Schweizer Jugendforscht’” projects at CERN under the supervision of Günther Dissertori, professor at the Swiss Federal Institute of Technology (ETH Zürich) and other members of ETH Zürich, Werner Lustermann and Michael Dittmar.

  4. 煤矿安全监控系统联网技术研究%Networking technology for safety supervision system in a coal mine

    Institute of Scientific and Technical Information of China (English)

    孙继平

    2009-01-01

    提出了煤矿安全监控系统联网方法,解决了各种不同系统互通互联问题: (1)中心站应自动向监控中心传送模拟量馈电异常、模拟量断电、模拟量报警、模拟量统计值、开关量馈电异常、开关量报警(断电)、开关量动作、系统工作异常、初始化等信息;(2)采用TCP/IP协议和套接字(Socket)通信;(3)数据分批发送,每批发送1个数据文件;(4)数据文件为文本文件(TXT)格式,每个文件包括单条或多条数据记录;(5)数据文件的第1条记录应是数据头,数据头由数据库(或文件夹)名称和数据表(或数据文件)名称组成,数据库(或文件夹)名称与数据表(数据库文件)名称之间用";"分隔,数据头用"|"结束,数据库(或文件夹)名称用2个字母表示:KJ表示煤矿监控,数据表(或数据文件)名称用4个字母表示;(6)每条数据记录用"~"结束;(7)每条数据记录中的字段用";"分隔;(8)每批数据以"||"结束等.%A method for networking of the coal mine supervision systems was put forward, which made the interconnection of different systems become practical. (1) Central station should send the following information automatically to the monitoring center, which includes analog feed abnormalities, analog power interruption, analog alarms, analog statistics, switch feed abnormalities, switching alarms (switching off), action of switch, system operation abnormalities, and initialization etc. ; ( 2) Adopt TCP / IP protocol and socket; (3) Send data in batches, with each batch being a data file; (4) The format of the data file is text file (TXT), each file contains a single data record or multiple data records; (5) The first record of the data file should be a data header, the data header is made up of the name of database (or the folder of the file) and the name of data table (or the data file) , the name of database ( or the folder of the file) is separated from the name of the data table ( or the data file ) by

  5. 建设工程质量检测技术与监管%The Test Technology of Engineering Quality and Supervision and Management

    Institute of Scientific and Technical Information of China (English)

    解建强

    2014-01-01

    For guarantee the science,justness,veracity and in time of the engineering quality test data, give engineering quality supervision organization play to the role of improve engineering quality,through enhance aptitude management of engineering quality test organization and dynamic management,regular the behavior of test organization,continually improve the diathesis of engineering quality tester,manage the test instrument and equipment strictly,improve the test quality,establish stability basis for continuous improve engineering quality. Through investigation and research for the local test market,doing the deeply research from aspects of engineering test work,provide idea and measure of improve engineering quality test continuous.%为了确保工程质量检测数据的科学性、公正性、准确性和及时性,充分发挥工程质量检测机构对提高建设工程质量的重要作用,通过加强对工程质量检测机构的资质管理和动态监管,规范检测机构行为,不断提高工程质量检测人员的素质,严格检测仪器、设备的管理等,从而提高检测工作质量,为工程质量的不断提高奠定坚实的基础。通过对本地区检测市场的调查、研究,从涉及工程检测工作的方方面面进行了深入分析,提出了持续推进工程质量检测工作不断提高的思路和方法。

  6. The ViewPoint radioprotection supervision workstation; Poste de supervision radioprotection viewpoint

    Energy Technology Data Exchange (ETDEWEB)

    Gaultier, E. [APVL Ingenierie- 6, bd Nobel - Equatop La Rabelais - 37540 Saint Cyr sur Loire (France)

    2009-07-01

    The author briefly presents the ViewPoint supervision global solution which incorporates audio and video advanced technologies to manage radioprotection operational measurements. Data can be transmitted by-wire or wireless. It can integrate a large number of radioprotection measurement instruments, such as a belt for the monitoring of physiological parameters (body temperature, breathing rhythm, body posture)

  7. Bias Modeling for Distantly Supervised Relation Extraction

    Directory of Open Access Journals (Sweden)

    Yang Xiang

    2015-01-01

    Full Text Available Distant supervision (DS automatically annotates free text with relation mentions from existing knowledge bases (KBs, providing a way to alleviate the problem of insufficient training data for relation extraction in natural language processing (NLP. However, the heuristic annotation process does not guarantee the correctness of the generated labels, promoting a hot research issue on how to efficiently make use of the noisy training data. In this paper, we model two types of biases to reduce noise: (1 bias-dist to model the relative distance between points (instances and classes (relation centers; (2 bias-reward to model the possibility of each heuristically generated label being incorrect. Based on the biases, we propose three noise tolerant models: MIML-dist, MIML-dist-classify, and MIML-reward, building on top of a state-of-the-art distantly supervised learning algorithm. Experimental evaluations compared with three landmark methods on the KBP dataset validate the effectiveness of the proposed methods.

  8. Building America Best Practices Series Volume 13: Energy Performance Techniques and Technologies: Preserving Historic Homes

    Energy Technology Data Exchange (ETDEWEB)

    Britt, Michelle L.; Baechler, Michael C.; Gilbride, Theresa L.; Hefty, Marye G.; Makela, Erin KB; Schneider, Elaine C.; Kaufman, Ned

    2011-03-01

    This guide is a resource to help contractors renovate historic houses, while addressing issues such as building durability, indoor air quality, and occupant health, safety, and comfort. The best practices described in this document are based on the results of research and demonstration projects conducted by Building America’s research teams. Building America brings together the nation’s leading building scientists with over 300 production builders to develop, test, and apply innovative, energy-efficient construction practices. The guide is available for download from the DOE Building America website www.buildingamerica.gov.

  9. Key Residential Building Equipment Technologies for Control and Grid Support PART I (Residential)

    Energy Technology Data Exchange (ETDEWEB)

    Starke, Michael R [ORNL; Onar, Omer C [ORNL; DeVault, Robert C [ORNL

    2011-09-01

    based on the largest electrical energy consumers in the residential sector are space heating and cooling, washer and dryer, water heating, lighting, computers and electronics, dishwasher and range, and refrigeration. As the largest loads, these loads provide the highest potential for delivering demand response and reliability services. Many residential loads have inherent flexibility that is related to the purpose of the load. Depending on the load type, electric power consumption levels can either be ramped, changed in a step-change fashion, or completely removed. Loads with only on-off capability (such as clothes washers and dryers) provide less flexibility than resources that can be ramped or step-changed. Add-on devices may be able to provide extra demand response capabilities. Still, operating residential loads effectively requires awareness of the delicate balance of occupants health and comfort and electrical energy consumption. This report is Phase I of a series of reports aimed at identifying gaps in automated home energy management systems for incorporation of building appliances, vehicles, and renewable adoption into a smart grid, specifically with the intent of examining demand response and load factor control for power system support. The objective is to capture existing gaps in load control, energy management systems, and sensor technology with consideration of PHEV and renewable technologies to establish areas of research for the Department of Energy. In this report, (1) data is collected and examined from state of the art homes to characterize the primary residential loads as well as PHEVs and photovoltaic for potential adoption into energy management control strategies; and (2) demand response rules and requirements across the various demand response programs are examined for potential participation of residential loads. This report will be followed by a Phase II report aimed at identifying the current state of technology of energy management systems

  10. Digital system in intelligent buildings for optimization of air conditioned; Sistema digital em edificios inteligentes para otimizar o ar condicionado

    Energy Technology Data Exchange (ETDEWEB)

    Lopez Martin, Jose; Mendes, Jeronimo [Nytek Solucoes Ltda., Sao Paulo, SP (Brazil)

    2001-07-15

    The general characteristics for the automation and control project of an air conditioned system are presented. Considering that this is the only one of the integrating subsystems of supervision central system of intelligent buildings, it is also shown the influence of the new technologies in the architectural projects and the use of architecture in the increase of the energy efficiency.

  11. Exploration and Practice of Education Supervision in Colleges in the Perspective of Concept of Scientific Development. To Take Wuxi Professional College of Science and Technology for an Example%科学发展观下高校教育督导工作的探索与实践——以无锡科技职业学院为例

    Institute of Scientific and Technical Information of China (English)

    周雪梅

    2012-01-01

    Based on the reality of a short history, Wuxi Professional College of Science and Technology has undertaken useful exploration and practice in education supervision, including the supervision team con- struction, system construction and ideological construction to find a unique and suitable way for its devel-opment.%高校教育督导工作的有效、全面开展,“三家一体”的队伍建设是前提,“严谨规范”的制度建设是关键,“以人为本”的督导理念建设是法宝。

  12. The Wicked Problem of the Intersection between Supervision and Evaluation

    Directory of Open Access Journals (Sweden)

    Ian M. METTE

    2017-03-01

    Full Text Available The purpose of this research was to explore how principals in eight high-functioning elementary schools in one American school district balanced teacher supervision and evaluation in their role as an instructional leader. Using the theoretical framework of ‘wicked problems’, to unpack the circular used to problematize teacher supervision and evaluation, the findings analyse how elementary principals in these eight buildings acknowledge the tensions and conflicts between supervision and evaluation, specifically as they relate to improving teacher instruction. Specifically, the results of this study highlight not only the differences between supervision and evaluation, but also the intersection between the two functions, as well as how high-performing elementary school principals serve as an instructional coach rather than a manager of teachers. While the two functions of supervision and evaluation are inherently different, it is the acknowledgement of the intersection between the two functions that can allow building principals to progress as instructional coaches who can better develop human resources and create higher-functioning school systems. Overall, this study points toward the importance of elementary principals having the instructional leadership skills to differentiate supervision and professional development need for teachers, which in turn influences the evaluation of a teacher is in her/his respective career.

  13. Technological Measures in Building Energy Efficiency Design%设计中的建筑节能技术措施

    Institute of Scientific and Technical Information of China (English)

    李玲

    2013-01-01

      该文论述了建筑节能设计中的技术措施。在设计中通过节能技术措施,引入绿色天然的环保能源,减少对不可再生资源的损耗,以求实现建筑节能和可持续发展。%Technological measures in building energy efficiency design are elaborated. Green energy is introduced in the design to reduce the consumption of non-renewable resource and to achieve building energy efficiency and sustainable development.

  14. Researching online supervision

    DEFF Research Database (Denmark)

    Smedegaard Ernst Bengtsen, Søren; Mathiasen, Helle

    2014-01-01

    , or a poor substitution of such. This one-sidedness on the conceptual level makes it challenging to empirically study the deeper implications digital tools have for the supervisory dialogue. Drawing on phenomenology and systems theory we argue that we need new concepts in qualitative methodology that allow...... us to research the digital tools on their own premises as autonomous things in themselves, possessing an ontological creativity of their own. In order for qualitative research to match the ontological nature of digital tools we conclude the article by formulating three criteria of a ‘torn......’ methodology that makes room for new approaches to researching online supervision at the university....

  15. Researching online supervision

    DEFF Research Database (Denmark)

    Bengtsen, Søren S. E.; Mathiasen, Helle

    2014-01-01

    us to research the digital tools on their own premises as autonomous things in themselves, possessing an ontological creativity of their own. In order for qualitative research to match the ontological nature of digital tools we conclude the article by formulating three criteria of a ‘torn......’ methodology that makes room for new approaches to researching online supervision at the university......., or a poor substitution of such. This one-sidedness on the conceptual level makes it challenging to empirically study the deeper implications digital tools have for the supervisory dialogue. Drawing on phenomenology and systems theory we argue that we need new concepts in qualitative methodology that allow...

  16. Creating science and technology superiority,increasing marine equipment manufacturing capability to build China into world No.1 shipbuilding country

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    The creation of science and technol-ogy superiority is the basic driving forceto push forward the development ofChina’s shipbuilding Industry by leaps andbounds,and achieve the goal of buildingChina into the world number one ship-building country. 1.The strength of science and tech-nology is the decisive factor affecting ourcompetitiveness in the world market The shipbuilding industry is a labour-intensive,capital-intensive and technology-intensive industry.However,ever since the90’s of the last century,with the wide ap-plication of new technology and new manu-facturing process,the productivity of shipconstruction has increased significantly,therole of primary production elements suchas low-priced labor has weakened dramati-cally in the market competition.With thecontinuous increase of technology inten-siveness in the shipbuilding industry,thestrength of science and technology is becoming the most important factor of mar-ket competitiveness.In the last ten years,in order to strengthen their technical sup

  17. Building components for an outpost on the Lunar soil by means of a novel 3D printing technology

    Science.gov (United States)

    Cesaretti, Giovanni; Dini, Enrico; De Kestelier, Xavier; Colla, Valentina; Pambaguian, Laurent

    2014-01-01

    3D-printing technologies are receiving an always increasing attention in architecture, due to their potential use for direct construction of buildings and other complex structures, also of considerable dimensions, with virtually any shape. Some of these technologies rely on an agglomeration process of inert materials, e.g. sand, through a special binding liquid and this capability is of interest for the space community for its potential application to space exploration. In fact, it opens the possibility for exploiting in-situ resources for the construction of buildings in harsh spatial environments. The paper presents the results of a study aimed at assessing the concept of 3D printing technology for building habitats on the Moon using lunar soil, also called regolith. A particular patented 3D-printing technology - D-shape - has been applied, which is, among the existing rapid prototyping systems, the closest to achieving full scale construction of buildings and the physical and chemical characteristics of lunar regolith and terrestrial regolith simulants have been assessed with respect to the working principles of such technology. A novel lunar regolith simulant has also been developed, which almost exactly reproduces the characteristics of the JSC-1A simulant produced in the US. Moreover, tests in air and in vacuum have been performed to demonstrate the occurrence of the reticulation reaction with the regolith simulant. The vacuum tests also showed that evaporation or freezing of the binding liquid can be prevented through a proper injection method. The general requirements of a Moon outpost have been specified, and a preliminary design of the habitat has been developed. Based on such design, a section of the outpost wall has been selected and manufactured at full scale using the D-shape printer and regolith simulant. Test pieces have also been manufactured and their mechanical properties have been assessed.

  18. Perspectives of heating technology in view of changed energy saving consciousness and building technology now and in future

    Energy Technology Data Exchange (ETDEWEB)

    Moellmann, E.

    1989-04-01

    The development and status of the central heating technology are described. Today's low-temperature heating systems have reduced the fuel consumption by 15 to 30%. Trends with regard to dimensioning and design of systems, microelectronic systems in control technology, exhaust removal systems, burner technologies are briefly described.

  19. Technical Support Document: 50% Energy Savings Design Technology Packages for Medium Office Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Thornton, Brian A.; Wang, Weimin; Lane, Michael D.; Rosenberg, Michael I.; Liu, Bing

    2009-09-01

    This Technical Support Document (TSD) describes the process and methodology for development of the Advanced Energy Design Guide for Medium Offices (AEDG-MO or the Guide), a design guidance document which intends to provide recommendations for achieving 50% energy savings in medium office buildings that just meet the requirements of ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings.

  20. Technology Solutions Case Study: Design Guidance for Passive Vents in New Construction, Multifamily Buildings

    Energy Technology Data Exchange (ETDEWEB)

    None

    2016-02-12

    In an effort to improve indoor air quality in high-performance, new construction, multifamily buildings, dedicated sources of outdoor air are being implemented. Passive vents are being selected by some design teams over other strategies because of their lower first costs and operating costs. The U.S. Department of Energy’s Building America research team Consortium for Advanced Residential Buildings constructed eight steps, which outline the design and commissioning required for these passive vents to perform as intended.

  1. Supervised Transfer Sparse Coding

    KAUST Repository

    Al-Shedivat, Maruan

    2014-07-27

    A combination of the sparse coding and transfer learn- ing techniques was shown to be accurate and robust in classification tasks where training and testing objects have a shared feature space but are sampled from differ- ent underlying distributions, i.e., belong to different do- mains. The key assumption in such case is that in spite of the domain disparity, samples from different domains share some common hidden factors. Previous methods often assumed that all the objects in the target domain are unlabeled, and thus the training set solely comprised objects from the source domain. However, in real world applications, the target domain often has some labeled objects, or one can always manually label a small num- ber of them. In this paper, we explore such possibil- ity and show how a small number of labeled data in the target domain can significantly leverage classifica- tion accuracy of the state-of-the-art transfer sparse cod- ing methods. We further propose a unified framework named supervised transfer sparse coding (STSC) which simultaneously optimizes sparse representation, domain transfer and classification. Experimental results on three applications demonstrate that a little manual labeling and then learning the model in a supervised fashion can significantly improve classification accuracy.

  2. Advanced Music Therapy Supervision Training

    DEFF Research Database (Denmark)

    2009-01-01

    supervision training excerpts live in the workshop will be offered. The workshop will include demonstrating a variety of supervision methods and techniques used in A) post graduate music therapy training programs b) a variety of work contexts such as psychiatry and somatic music psychotherapy. The workshop......The presentation will illustrate training models in supervision for experienced music therapists where transference/counter transference issues are in focus. Musical, verbal and body related tools will be illustrated from supervision practice by the presenters. A possibility to experience small...

  3. Advanced Music Therapy Supervision Training

    DEFF Research Database (Denmark)

    2009-01-01

    supervision training excerpts live in the workshop will be offered. The workshop will include demonstrating a variety of supervision methods and techniques used in A) post graduate music therapy training programs b) a variety of work contexts such as psychiatry and somatic music psychotherapy. The workshop......The presentation will illustrate training models in supervision for experienced music therapists where transference/counter transference issues are in focus. Musical, verbal and body related tools will be illustrated from supervision practice by the presenters. A possibility to experience small...

  4. BIM 技术在绿色建筑中的应用%Application of BIM technology in green building

    Institute of Scientific and Technical Information of China (English)

    黄锦涛

    2015-01-01

    Based on the development status of green BIM,the application of BIM technology in the entire building life cycle is analysed,and the prospect and key points of domestic green BIM’s development are discussed,point out combining BIM technology and green building together have become the inevitable trend of China’s construction industry.%通过比对国内外绿色BIM的发展现状,分析BIM技术在建筑全生命周期的应用可能,探讨了国内绿色BIM的发展前景和注意要点,指出将BIM技术与绿色建筑相结合是中国建筑业发展的必然趋势。

  5. Public Supervision over Private Relationships : Towards European Supervision Private Law?

    NARCIS (Netherlands)

    Cherednychenko, O.O.

    2014-01-01

    The rise of public supervision over private relationships in many areas of private law has led to the development of what, in the author’s view, could be called ‘European supervision private law’. This emerging body of law forms part of European regulatory private law and is made up of contract-rela

  6. Supervising PETE Candidates Using the Situational Supervision Model

    Science.gov (United States)

    Levy, Linda S.; Johnson, Lynn V.

    2012-01-01

    Physical education teacher candidates (PETCs) often, as part of their curricular requirements, engage in early field experiences that prepare them for student teaching. Matching the PETC's developmental level with the mentor's supervision style enhances this experience. The situational supervision model, based on the situational leadership model,…

  7. Exploring Clinical Supervision as Instrument for Effective Teacher Supervision

    Science.gov (United States)

    Ibara, E. C.

    2013-01-01

    This paper examines clinical supervision approaches that have the potential to promote and implement effective teacher supervision in Nigeria. The various approaches have been analysed based on the conceptual framework of instructional supervisory behavior. The findings suggest that a clear distinction can be made between the prescriptive and…

  8. Supervision Learning as Conceptual Threshold Crossing: When Supervision Gets "Medieval"

    Science.gov (United States)

    Carter, Susan

    2016-01-01

    This article presumes that supervision is a category of teaching, and that we all "learn" how to teach better. So it enquires into what novice supervisors need to learn. An anonymised digital questionnaire sought data from supervisors [n226] on their experiences of supervision to find out what was difficult, and supervisor interviews…

  9. Supervision Learning as Conceptual Threshold Crossing: When Supervision Gets "Medieval"

    Science.gov (United States)

    Carter, Susan

    2016-01-01

    This article presumes that supervision is a category of teaching, and that we all "learn" how to teach better. So it enquires into what novice supervisors need to learn. An anonymised digital questionnaire sought data from supervisors [n226] on their experiences of supervision to find out what was difficult, and supervisor interviews…

  10. Supervision of Supervised Agricultural Experience Programs: A Synthesis of Research.

    Science.gov (United States)

    Dyer, James E.; Williams, David L.

    1997-01-01

    A review of literature from 1964 to 1993 found that supervised agricultural experience (SAE) teachers, students, parents, and employers value the teachers' supervisory role. Implementation practices vary widely and there are no cumulative data to guide policies and standards for SAE supervision. (SK)

  11. Capacity building for the effective adoption of renewable energy technologies in rural areas. Experience of India NGOs

    Energy Technology Data Exchange (ETDEWEB)

    Myles, R. [Integrated Sustainable Energy and Ecological Development Association (INSEDA), New Delhi (India)

    2002-07-01

    The experience of NGO network in the promotions of biogas and other low cost RET gadgets, devices, equipments and machines in the rural areas of India, for over two decades, have shown that there are serveral problems yet challenging opportunities in the promotion and implementation of renewable energy technologies in villages. First of all, the field and extension organizations should recognise that these technologies are new and aliens to the rural people, therefore like any other technologies, developed outside the rural environment, RETs are first view with skepticism by the rural community. Even if 100 units of a RE technology are successfully demonstrated, failure of even one could create negative impact within a radius of 30-50 KMs, and its shortcomings are spread like a wild fire. The appropriate technology demonstration backed by systematic capacity building of different stakeholders/actors/players (i.e. Energy Producers, Energy Service Providers and the Energy End Users) is a must for the acceptance and large-scale adoption of RETs in rural areas of the developing countries. The programme funds for the promotion and implementation of RETs should have good percentage earmarked for the capacity building as well as supporting infrastructure for awareness, motivation, promotional and post installation services activities by local field level organizations and NGOs on a long term basis. (orig.)

  12. 物联网管理模式下食品安全监管途径研究%The Building of the Food Safety Supervision Pattern Based on the Internet of Things Management Model

    Institute of Scientific and Technical Information of China (English)

    王谦; 江瑜红

    2014-01-01

    近年来我国食品安全事件频发,已引起了全社会的强烈关注,引发了公众对监管部门的质疑。食品安全涉及面广,牵涉环节众多,特别是少数民族地区以及偏远农村,常常成为监管的盲区和管理的软肋,如何破解食品安全顽疾已成为政府亟待解决的问题。文章分析了我国食品安全的现状及监管存在的问题,基于“四端联动、三位一体”IOT管理模式的系统思维,探索了新的管理模式——物联网管理模式,构建基于物联网管理模式下的食品安全监管模式,并就政府如何对IOT管理模式下食品安全监管进行管理提出建议。%In recent years, food safety incidents occur frequently in China, so food safety has aroused intense at⁃tention of the whole society and public questioning of regulators. And food safety is broad, involves many links, especially for the ethnic minority areas and remote rural areas, such as Tibet, because of its special geographical environment and humanistic characteristics, is often the blind area of supervision and management. Therefore, how to solve food safety problems has become an urgent issue of the government. Firstly, the article discusses the present condition of food safety in China, and sums up the problems of food safety supervision at present. And then it explores a new management model, the Internet of Things Management Model, for food safety supervision. At last, some suggestion is proposed to the government of how to manage food safety supervision based on the In⁃ternet of Things Management model.

  13. Building Mental Models by Dissecting Physical Models

    Science.gov (United States)

    Srivastava, Anveshna

    2016-01-01

    When students build physical models from prefabricated components to learn about model systems, there is an implicit trade-off between the physical degrees of freedom in building the model and the intensity of instructor supervision needed. Models that are too flexible, permitting multiple possible constructions require greater supervision to…

  14. Key Residential Building Equipment Technologies for Control and Grid Support PART I (Residential)

    Energy Technology Data Exchange (ETDEWEB)

    Starke, Michael R [ORNL; Onar, Omer C [ORNL; DeVault, Robert C [ORNL

    2011-09-01

    based on the largest electrical energy consumers in the residential sector are space heating and cooling, washer and dryer, water heating, lighting, computers and electronics, dishwasher and range, and refrigeration. As the largest loads, these loads provide the highest potential for delivering demand response and reliability services. Many residential loads have inherent flexibility that is related to the purpose of the load. Depending on the load type, electric power consumption levels can either be ramped, changed in a step-change fashion, or completely removed. Loads with only on-off capability (such as clothes washers and dryers) provide less flexibility than resources that can be ramped or step-changed. Add-on devices may be able to provide extra demand response capabilities. Still, operating residential loads effectively requires awareness of the delicate balance of occupants health and comfort and electrical energy consumption. This report is Phase I of a series of reports aimed at identifying gaps in automated home energy management systems for incorporation of building appliances, vehicles, and renewable adoption into a smart grid, specifically with the intent of examining demand response and load factor control for power system support. The objective is to capture existing gaps in load control, energy management systems, and sensor technology with consideration of PHEV and renewable technologies to establish areas of research for the Department of Energy. In this report, (1) data is collected and examined from state of the art homes to characterize the primary residential loads as well as PHEVs and photovoltaic for potential adoption into energy management control strategies; and (2) demand response rules and requirements across the various demand response programs are examined for potential participation of residential loads. This report will be followed by a Phase II report aimed at identifying the current state of technology of energy management systems

  15. Discussion on Construction Technology and Building Energy Consumption%浅议建筑施工技术与建筑能耗

    Institute of Scientific and Technical Information of China (English)

    刘宝安; 余冰磊

    2014-01-01

    为有效解决建筑能耗问题,应当在建筑施工中积极采用各种节能技术,从根本上降低建筑能耗。基于此点,本文就建筑施工技术与建筑能耗进行了研究。%Energy-saving technologies should be actively ado- pted in the construction to solve the problem of building ene- rgy consumption in order to reduce building energy consump- tion fundamentally. Based on this point, this paper studied the construction technology and building energy consumption of buildings.

  16. Improving the Development of Postgraduates' Research and Supervision

    Science.gov (United States)

    Ismail, Affero; Abiddin, Norhasni Zainal; Hassan, Aminuddin

    2011-01-01

    Research and supervision have become a vital process in the successful of postgraduate studies. Building an academic career path after Higher National Degree or Bachelor Degree needs intensive training and preparation. This culminates in writing of thesis or dissertation. In this process, the supervisor is designated to facilitate the student's…

  17. Inductive Supervised Quantum Learning

    Science.gov (United States)

    Monràs, Alex; Sentís, Gael; Wittek, Peter

    2017-05-01

    In supervised learning, an inductive learning algorithm extracts general rules from observed training instances, then the rules are applied to test instances. We show that this splitting of training and application arises naturally, in the classical setting, from a simple independence requirement with a physical interpretation of being nonsignaling. Thus, two seemingly different definitions of inductive learning happen to coincide. This follows from the properties of classical information that break down in the quantum setup. We prove a quantum de Finetti theorem for quantum channels, which shows that in the quantum case, the equivalence holds in the asymptotic setting, that is, for large numbers of test instances. This reveals a natural analogy between classical learning protocols and their quantum counterparts, justifying a similar treatment, and allowing us to inquire about standard elements in computational learning theory, such as structural risk minimization and sample complexity.

  18. Supervision in Special Language Programs.

    Science.gov (United States)

    Florez-Tighe, Viola

    Too little emphasis is placed on instructional supervision in special language programs for limited-English-proficient students. Such supervision can provide a mechanism to promote the growth of instructional staff, improve the instructional program, and lead to curriculum development. Many supervisors are undertrained and unable to provide…

  19. Unfinished Business: Subjectivity and Supervision

    Science.gov (United States)

    Green, Bill

    2005-01-01

    Within the now burgeoning literature on doctoral research education, postgraduate research supervision continues to be a problematical issue, practically and theoretically. This paper seeks to explore and understand supervision as a distinctive kind of pedagogic practice. Informed by a larger research project, it draws on poststructuralism,…

  20. Supervision af psykoterapi via Skype

    DEFF Research Database (Denmark)

    Jacobsen, Claus Haugaard; Grünbaum, Liselotte

    2011-01-01

    clinical experience of Skype™ in supervision, mainly of psychoanalytic child psychotherapy, is presented and reflected upon. Finally, the reluctance of the Danish Board for Psychologists’s to recognize audiovisual distance supervision as part of the required training demands is discussed. It is concluded...

  1. Supervisees' Perception of Clinical Supervision

    Science.gov (United States)

    Willis, Lisa

    2010-01-01

    Supervisors must become aware of the possible conflicts that could arise during clinical supervision. It is important that supervisors communicate their roles and expectations effectively with their supervisees. This paper supports the notion that supervision is a mutual agreement between the supervisee and the supervisor and the roles of…

  2. Assessment of Counselors' Supervision Processes

    Science.gov (United States)

    Ünal, Ali; Sürücü, Abdullah; Yavuz, Mustafa

    2013-01-01

    The aim of this study is to investigate elementary and high school counselors' supervision processes and efficiency of their supervision. The interview method was used as it was thought to be better for realizing the aim of the study. The study group was composed of ten counselors who were chosen through purposeful sampling method. Data were…

  3. Tværfaglig supervision

    DEFF Research Database (Denmark)

    Tværfaglig supervision dækker over supervision af forskellige faggrupper. Det er en kompleks disciplin der stiller store krav tl supervisor. Bogens første del præsenterer fire faglige supervisionsmodeller: En almen, en psykodynamisk, en kognitiv adfærdsterapeutisk og en narrativ. Anden del...

  4. Tværfaglig supervision

    DEFF Research Database (Denmark)

    Tværfaglig supervision dækker over supervision af forskellige faggrupper. Det er en kompleks disciplin der stiller store krav tl supervisor. Bogens første del præsenterer fire faglige supervisionsmodeller: En almen, en psykodynamisk, en kognitiv adfærdsterapeutisk og en narrativ. Anden del henven...

  5. Supervision Duty of School Principals

    Directory of Open Access Journals (Sweden)

    Kürşat YILMAZ

    2009-04-01

    Full Text Available Supervision by school administrators is becoming more and more important. The change in the roles ofschool administrators has a great effect on that increase. At present, school administrators are consideredmore than as technical directors, but as instructional leaders. This increased the importance of schooladministrators’ expected supervision acts. In this respect, the aim of this study is to make a conceptualanalysis about school administrators’ supervision duties. For this reason, a literature review related withsupervision and contemporary supervision approaches was done, and the official documents concerningsupervision were examined. As a result, it can be said that school administrators’ supervision duties havebecome very important. And these duties must certainly be carried out by school administrators.

  6. Group supervision for general practitioners

    DEFF Research Database (Denmark)

    Galina Nielsen, Helena; Sofie Davidsen, Annette; Dalsted, Rikke;

    2013-01-01

    AIM: Group supervision is a sparsely researched method for professional development in general practice. The aim of this study was to explore general practitioners' (GPs') experiences of the benefits of group supervision for improving the treatment of mental disorders. METHODS: One long...... considered important prerequisites for disclosing and discussing professional problems. CONCLUSION: The results of this study indicate that participation in a supervision group can be beneficial for maintaining and developing GPs' skills in dealing with patients with mental health problems. Group supervision......-established supervision group was studied closely for six months by observing the group sessions, and by interviewing GPs and their supervisors, individually and collectively. The interviews were recorded digitally and transcribed verbatim. The data were analysed using systematic text condensation. RESULTS: The GPs found...

  7. Highlighting High Performance: Four Times Square. Office of Building Technology, State and Community Programs (BTS) Brochure

    Energy Technology Data Exchange (ETDEWEB)

    None

    2001-11-01

    4 Times Square is a 48-story environmentally responsible building in New York City and is the first project of its size to adopt standards for energy efficiency, indoor ecology, sustainable materials.

  8. High-Performance Home Technologies: Solar Thermal & Photovoltaic Systems; Volume 6 Building America Best Practices Series

    Energy Technology Data Exchange (ETDEWEB)

    None

    2007-06-01

    The sixth volume of the Building America Best Practices Series presents information that is useful throughout the U.S. for enhancing the energy efficiency practices in the specific climate zones that are presented in each of the volumes.

  9. New measurement technology for diagnostic evaluation of stress and deformation states in building objects

    Science.gov (United States)

    Kollataj, Robert; Kollataj, Jerzy

    2001-08-01

    This paper presents a new wireless measurement method for static and dynamic examination of buildings, bridges, masts, towers, steel structures, silos etc. by using new generation telemetric modules operating in intelligent radio network. The system provides a possibility of steel and reinforced concrete structures evaluation by measurement of mechanical stresses, deformation and temperature - depending on used sensor. Developed and built prototype system can be used for the on line monitoring, quality assessment and the usefulness of the building objects over long time periods.

  10. Optimization and Performance Study of Select Heating Ventilation and Air Conditioning Technologies for Commercial Buildings

    Science.gov (United States)

    Kamal, Rajeev

    Buildings contribute a significant part to the electricity demand profile and peak demand for the electrical utilities. The addition of renewable energy generation adds additional variability and uncertainty to the power system. Demand side management in the buildings can help improve the demand profile for the utilities by shifting some of the demand from peak to off-peak times. Heating, ventilation and air-conditioning contribute around 45% to the overall demand of a building. This research studies two strategies for reducing the peak as well as shifting some demand from peak to off-peak periods in commercial buildings: 1. Use of gas heat pumps in place of electric heat pumps, and 2. Shifting demand for air conditioning from peak to off-peak by thermal energy storage in chilled water and ice. The first part of this study evaluates the field performance of gas engine-driven heat pumps (GEHP) tested in a commercial building in Florida. Four GEHP units of 8 Tons of Refrigeration (TR) capacity each providing air-conditioning to seven thermal zones in a commercial building, were instrumented for measuring their performance. The operation of these GEHPs was recorded for ten months, analyzed and compared with prior results reported in the literature. The instantaneous COPunit of these systems varied from 0.1 to 1.4 during typical summer week operation. The COP was low because the gas engines for the heat pumps were being used for loads that were much lower than design capacity which resulted in much lower efficiencies than expected. The performance of equivalent electric heat pump was simulated from a building energy model developed to mimic the measured building loads. An economic comparison of GEHPs and conventional electrical heat pumps was done based on the measured and simulated results. The average performance of the GEHP units was estimated to lie between those of EER-9.2 and EER-11.8 systems. The performance of GEHP systems suffers due to lower efficiency at

  11. Schools, Children, and Digital Technology: Building Better Relationships for a Better Tomorrow

    Science.gov (United States)

    van 't Hooft, Mark

    2007-01-01

    Given their comfort with and pervasive use of technology, today's students are undeniably different from those twenty, ten, or even five years ago. The prevalence of technological tools has clearly affected how the youth of today read, write, and communicate, which has, in turn, led to a technology-based generation divide. Mark van 't Hooft opens…

  12. The Chinese Politics of Communication Technology: Utility, State Building and Control

    Science.gov (United States)

    Su, Dan

    2012-01-01

    This study provides an examination into the formulation and construction of information and communication technology policy in China. It traces the rise of information technology and the "informatization" drive in China's political rhetoric, and identifies the changes and trajectory of information and communication technology in China's…

  13. Discussion on the Quality Supervision of Rainwater Reuse System for Green Buildings in Nanjing%浅谈南京地区绿建项目雨水回用系统的质量监督

    Institute of Scientific and Technical Information of China (English)

    周若涵

    2016-01-01

    The mode and key point of rainwater reuse system was creatively proposed in this paper by combining construction with quality supervision of rainwater reuse system,which was based on laws and regulations. Meanwhile,the requirement for rainwater reuse system test and acceptance was put forward to serve as reference for numerous quality supervisory workers.%结合南京地区雨水回用系统建设和监督管理的现状,依据相关政策法规和标准规范,创新性地提出了雨水回用系统的质量监督方式和重点,并提出了系统检验和验收的要求。

  14. The concrete technology of post pouring zone of raft foundation of Hongyun Building B tower

    Science.gov (United States)

    Yin, Suhua; Yu, Liu; Wu, Yanli; Zhao, Ying

    2017-08-01

    The foundation of Hongyun building B tower is made of raft board foundation which is 3300mm in the thickness concreted pouring amount of large and the late poured band in the pouring settlement formed. The temperature of the pouring settlement was controlled in order to prevent the crack of the construction of the late poured band. The steel of post pouring band was designed and monitorred. The quality of post pouring band quality is guaranteed in the raft concrete foundation of Hongyun Building B tower.

  15. Seizing the strategic opportunities of emerging technologies by building up innovation system: monoclonal antibody development in China.

    Science.gov (United States)

    Zhang, Mao-Yu; Li, Jian; Hu, Hao; Wang, Yi-Tao

    2015-11-04

    Monoclonal antibodies (mAbs), as an emerging technology, have become increasingly important in the development of human therapeutic agents. How developing countries such as China could seize this emerging technological opportunity remains a poorly studied issue in prior literature. Thus, this paper aims to investigate the research and development of mAbs in China based on an innovation system functions approach and probes into the question of how China has been taking advantage of emerging technologies to overcome its challenges of building up a complete innovation system in developing mAbs. Mixed research methods were applied by combining archival data and field interviews. Archival data from the China Food and Drug Administration, Web of Science, the United States Patent and Trademark Office, the Chinese Clinical Trial Registry, and the National Science and Technology Report Service were used to examine the status quo of the technology and research and development (R&D) activities in China, while the opinions of researchers and managers in this field were synthesized from the interviews. From the perspective of innovation system functions, technological development of mAb in China is being driven by incentives such as the subsidies from the State and corporate R&D funding. Knowledge diffusion has been well served over the last 10 years through exchanging information on networks and technology transfer with developed countries. The State has provided clear guidance on search of emerging mAb technologies. Legitimacy of mAb in China has gained momentum owing to the implementation of government policies stipulated in the "The Eleventh Five-year Plan" in 2007, as well as national projects such as the "973 Program" and "863 Program", among others. The potential of market formation stays high because of the rising local demand and government support. Entrepreneurial activities for mAb continue to prosper. In addition, the situation of resource supply has been improved

  16. Implementing a Technology-Supported Model for Cross-Organisational Learning and Knowledge Building for Teachers

    Science.gov (United States)

    Tammets, Kairit; Pata, Kai; Laanpere, Mart

    2012-01-01

    This study proposed using the elaborated learning and knowledge building model (LKB model) derived from Nonaka and Takeuchi's knowledge management model for supporting cross-organisational teacher development in the temporarily extended organisations composed of universities and schools. It investigated the main LKB model components in the context…

  17. External Group Coaching and Mentoring: Building a Research Community of Practice at a University of Technology

    Science.gov (United States)

    Maritz, Jeanette; Visagie, Retha; Johnson, Bernadette

    2013-01-01

    Globally, a clarion call has been made for higher education institutions to establish creative and effective research capacity-building systems with the purpose of developing a next generation of scholars. The training and skills development of a researcher entail a process of increasing levels of participation in diverse communities of practice.…

  18. Applying Peer-to-Peer Technology to the Building of Distributed Educational Systems

    Science.gov (United States)

    Leighton, Greg; Muldner, Tomasz

    2005-01-01

    Existing educational systems built for cooperative and collaborative activities are most often based on the client/server paradigm of distributed computing. This article shows that a new model for distributed computing, Peer-to-Peer (P2P), provides new opportunities for building distributed educational applications. It begins by reviewing general…

  19. The Potential of Wastewater Energy Recovery in Smart Buildings by using Internet of Things Technology

    DEFF Research Database (Denmark)

    Lynggaard, Per

    2015-01-01

    There is a large untapped potential to harvest heat from the wastewater leaving a building. Especially, shower, washing machines and dishwashers are sources that waste heat directly into the drainage system. This paper focuses on the potential of recovering some of this wasted heat by using heat...

  20. Technology Solutions Case Study: Evaluation of Passive Vents in New-Construction Multifamily Buildings

    Energy Technology Data Exchange (ETDEWEB)

    S. Puttagunta, S. Maxwell, D. Berger, and M. Zuluaga

    2015-10-01

    The Consortium for Advanced Residential Buildings (CARB) conducted research to gain more insight into passive vents. Because passive vents are meant to operate in a general environment of negative apartment pressure, the research assessed whether these negative pressures prevail through a variety of environmental conditions.

  1. Technical Approach for the Development of DOE Building America Builders Challenge Technology Information Packages (Revised)

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, D. R.; Anderson, R.

    2009-08-01

    The U.S. Department of Energy has issued a challenge to the homebuilding industry to build 220,000 high-performance homes by 2012. To qualify, homes must meet the requirements of a performance path, prescriptive path, or participating in a partner program.

  2. Bamboo as a Building Material. Peace Corps. Appropriate Technologies for Development. Reprint R-33.

    Science.gov (United States)

    McClure, F. A.

    This manual, developed by the U.S. Department of Agriculture under the Point Four program, presents critical features and principles of using bamboo as a building material. Information provided in the manual includes the following: parts of a house for which bamboos are suitable, bamboo reinforcement of concrete, geographical distribution of…

  3. Environmental and Sustainable Technology Evaluations (ESTE): Verification of Microbial Resistant Building Materials

    Science.gov (United States)

    This is an ESTE project summary brief. Many of the finished interior surfaces of homes and buildings are composed of materials that are prone to mold growth. These surfaces include gypsum board, wood flooring, insulation, and components of the heating and air conditioning system...

  4. Building Future Security: Strategies for Restructuring the Defense Technology and Industrial Base.

    Science.gov (United States)

    1992-06-01

    engineers in a specialized project shop. Although this approach initially sparked resistance, it promoted greater manufactura - bility by forcing...69, p. 760. 106 • Building Future Security video and animation at each employee workstation. Construction, however, remains primarily a hands- on

  5. Building America Best Practices Series, Volume 10: Retrofit Techniques and Technologies: Air Sealing

    Energy Technology Data Exchange (ETDEWEB)

    Baechler, Michael C.; Gilbride, Theresa L.; Hefty, Marye G.; Cole, Pamala C.; Williamson, Jennifer L.; Love, Pat M.

    2010-04-12

    This report was prepared by PNNL for the U.S. Department of Energy Building America Program. The report provides information to home owners who want to make their existing homes more energy efficient by sealing leaks in the building envelope (ceiling, walls, and floors) that let in drafts and let conditioned air escape. The report provides descriptions of 19 key areas of the home where air sealing can improve home performance and energy efficiency. The report includes suggestions on how to find a qualified weatherization or home performance contractor, what to expect in a home energy audit, opportune times for performing air sealing, and what safety and health concerns to be aware of. The report describes some basic building science concepts and topics related to air sealing including ventilation, diagnostic tools, and code requirements. The report will be available for free download from the DOE Building America website. It is a suitable consumer education tool for home performance and weatherization contractors to share with customers to describe the process and value of home energy retrofits.

  6. Technology Solutions Case Study: Boiler Control Replacement for Hydronically Heated Multifamily Buildings, Cambridge, Massachusetts

    Energy Technology Data Exchange (ETDEWEB)

    None

    2014-11-01

    The ARIES Collaborative, a U.S. Department of Energy Building America research team, partnered with NeighborWorks America affiliate Homeowners' Rehab Inc. (HRI) of Cambridge, Massachusetts, to study improvements to the central hydronic heating system in one of the nonprofit's housing developments. The heating controls in the three-building, 42-unit Columbia Cambridge Alliance for Spanish Tenants housing development were upgraded. Fuel use in the development was excessive compared to similar properties. A poorly insulated thermal envelope contributed to high energy bills, but adding wall insulation was not cost-effective or practical. The more cost-effective option was improving heating system efficiency, which faced several obstacles, including inflexible boiler controls and failed thermostatic radiator valves. Boiler controls were replaced with systems that offer temperature setbacks and one that controls heat based on apartment temperature in addition to outdoor temperature. Utility bill analysis shows that post-retrofit weather-normalized heating energy use was reduced by 10%-31% (average of 19%). Indoor temperature cutoff reduced boiler runtime (and therefore heating fuel consumption) by 28% in the one building in which it was implemented. Nearly all savings were obtained during night which had a lower indoor temperature cut off (68°F) than day (73° F). This implies that the outdoor reset curve was appropriately adjusted for this building for daytime operation. Nighttime setback of heating system supply water temperature had no discernable impact on boiler runtime or gas bills.

  7. Trade Supervision Adjustment in 2012

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    China revised its supervision policies on import and export trades again, with 13 notices approved by related government ministries and administrations as well as 15 catalogues of import and export licenses being involved.

  8. Learning Dynamics in Doctoral Supervision

    DEFF Research Database (Denmark)

    Kobayashi, Sofie

    This doctoral research explores doctoral supervision within life science research in a Danish university. From one angle it investigates doctoral students’ experiences with strengthening the relationship with their supervisors through a structured meeting with the supervisor, prepared as part...... investigates learning opportunities in supervision with multiple supervisors. This was investigated through observations and recording of supervision, and subsequent analysis of transcripts. The analyses used different perspectives on learning; learning as participation, positioning theory and variation theory....... The research illuminates how learning opportunities are created in the interaction through the scientific discussions. It also shows how multiple supervisors can contribute to supervision by providing new perspectives and opinions that have a potential for creating new understandings. The combination...

  9. Combining experts' risk judgments on technology performance of phytoremediation: self-confidence ratings, averaging procedures, and formative consensus building.

    Science.gov (United States)

    Scholz, Roland W; Hansmann, Ralf

    2007-02-01

    Expert panels and averaging procedures are common means for coping with the uncertainty of effects of technology application in complex environments. We investigate the connection between confidence and the validity of expert judgment. Moreover, a formative consensus building procedure (FCB) is introduced that generates probability statements on the performance of technologies, and we compare different algorithms for the statistical aggregation of individual judgments. The case study refers to an expert panel of 10 environmental scientists assessing the performance of a soil cleanup technology that uses the capability of certain plants to accumulate heavy metals from the soil in the plant body (phytoremediation). The panel members first provided individual statements on the effectiveness of a phytoremediation. Such statements can support policymakers, answering the questions concerning the expected performance of the new technology in contaminated areas. The present study reviews (1) the steps of the FCB, (2) the constraints of technology application (contaminants, soil structure, etc.), (3) the measurement of expert knowledge, (4) the statistical averaging and the discursive agreement procedures, and (5) the boundaries of application for the FCB method. The quantitative statement oriented part of FCB generates terms such as: "The probability that the concentration of soil contamination will be reduced by at least 50% is 0.8." The data suggest that taking the median of the individual expert estimates provides the most accurate aggregated estimate. The discursive agreement procedure of FCB appears suitable for deriving politically relevant singular statements rather than for obtaining comprehensive information about uncertainties as represented by probability distributions.

  10. Building a Four Year Post-Secondary Curriculum in Educational Science and Technology.

    Science.gov (United States)

    Plomp, Tjeerd; Verhagen, Plon

    This report begins by providing background information on educational technology in the Netherlands, differences between a four-year program in the Netherlands and undergraduate programs in the United States, and the structure of Dutch university programs. The need for a Department of Educational Science and Technology at the Twente University of…

  11. Web 2.0 Technologies and Building Online Learning Communities: Students' Perspectives

    Science.gov (United States)

    Abdelmalak, Mariam Mousa Matta

    2015-01-01

    The purpose of this action research was to explore students' perspectives regarding using Web 2.0 technologies to develop a community of learners. The course described in this study was a fully online course in an Educational Learning Technologies master's program at a medium-sized university in the U.S. Southwest. A variety of Web 2.0 tools…

  12. Building a Culture of Trust: Trust in the Use of Educational Technology

    Science.gov (United States)

    Kirkman, Jacqueline

    2014-01-01

    This paper investigates the place of trust in a school context and its importance in achieving the aims of schooling, "namely high academic performance and positive affects among members of the school community" (Forsyth, 2008). The role of trust in the use of technology and technological change is examined. Literature is surveyed in the…

  13. The response of common building construction technologies to the urban poor and their environment

    CSIR Research Space (South Africa)

    Wekesa, BW

    2010-10-01

    Full Text Available of the technologies are not responsive in the regional context. That is, the technologies cannot provide a good quality dwelling unit and at the same time address the socio-economic needs of the urban poor while minimising the negative impact on the environment....

  14. The Building of 3G Mobile Learning System using Ajax Technology

    Science.gov (United States)

    Xiulan, Chen; Jing, Wang

    This paper built 3G mobile learning system using Ajax technology. Ajax technology helps overcome the mobile browser to certain restrictions, while improving the user experience. Use Ajax to avoid page refreshes. Because only the transmission part of the page, the data using Ajax to load faster and also reduce the amount of data of air transport.

  15. The efficiency of diagnostics technical-technological potential machine-building enterprises

    Directory of Open Access Journals (Sweden)

    Sv. P. Kuzmenko

    2011-12-01

    Full Text Available Diagnostics methods potential of enterprise, technical-technological potential is examined. Their essence is analyzed positive, negative moments, possibility of the use for development of enterprises of engineer. Formed a system of indicators for rapid diagnosis on the basis of three groups: industrial, financial and technological.

  16. Study of composition and morphology features of alumina producing waste for its application in road building technologies

    Science.gov (United States)

    Shepelev, Igor; Bochkov, Nikolay; Zhyzhaev, Anatoly

    2016-01-01

    The research of component composition of complex mineral binder material obtained using non-toxic alumina producing waste was performed. The strength characteristics of road mixtures and binder mineral product structure were studied. The technology of subgrade building on the basis of nepheline slime, gypsum-anhydrite waste and dust from cleaning collectors of electrostatic gas treatment systems of calcination furnaces of Achinsk alumina plant was developed and experimentally tested. It provides beside of part of waste utilization also increasing of strength properties and frost resistance of road mixtures.

  17. The use of the bottom ashes and of the steelmaking slags in the manufacturing technologies of the building materials

    Directory of Open Access Journals (Sweden)

    L. G. Popescu

    2016-07-01

    Full Text Available The energetic and metallurgy industries of Romania represent the main waste sources significant from the point of quantitative view: the bottom ashes and the blast furnace and secondary metallurgical slags. Starting from the knowledge of the main chemical-physical properties of these two types of industrial wastes, there were inquired the exploitation possibilities in the technological practice, by using in the manufacturing of some building materials, for which these wastes represent the exclusive raw material source. The experiments considered the granular aggregate properties of the bottom ash and of the blast furnace slag, completed by the hydraulic binder of the secondary metallurgical slag, after the fine crushing.

  18. Customer centered health care: why managed care organizations must capitalize on new technology to build brands and customer loyalty.

    Science.gov (United States)

    Fell, D

    1998-01-01

    Now, more than ever, health care organizations are desperately trying to reach out to customers and establish stronger relationships that will generate increased loyalty and repeat business. As technology, like the Internet and related mediums, allow us to do a better job of managing information and communication, health care executives must invest the time and resources necessary to bring these new advances into the day-to-day operations of their businesses. Those that do will have a head start in building their brand and their customer loyalty.

  19. IN SITU GEOTHERMAL ENERGY TECHNOLOGY: AN APPROACH FOR BUILDING CLEANER AND GREENER ENVIRONMENT

    Directory of Open Access Journals (Sweden)

    Md. Faruque Hossain

    2016-01-01

    Full Text Available Geothermal energy is abundant everywhere in the world. It certainly would be a great benefit for human being once it is produced by a sophisticated technology. Consequently, it would be the biggest console for earth considering environmental sustainability. Unfortunately, the current status of commercial production of geothermal energy primarily from hydrothermal, geopressured, hot dry rock, and magma are limited to a few countries due to technological difficulties and production cost. This paper describes a simple technology where an in situ geothermal plant assisted by a heat pump would act as a high-temperature production (>150°C to provide excellent capacity of energy generation. The issue related to costs is interestingly cheaper on production, comparing to other technologies, such as solar, hydro, wind, and traditional geothermal technology as described in this article. Therefore, it is suggested that heat pump assisted in situ geothermal energy sources has a great potentiality to be a prime energy source in near future. Since the technology has a number of positive characteristics (simple, safe, and provides continuous baseload, load following, or peaking capacity and benign environmental attributes (zero emissions of CO2, SOx, and NOx, it certainly would be an interesting technology in both developed, and developing countries as an attractive option to produce clean energy to confirm a better environment.

  20. Highlighting High Performance: National Renewable Energy Laboratory's Thermal Test Facility, Golden, Colorado. Office of Building Technology State and Community Programs (BTS) Brochure

    Energy Technology Data Exchange (ETDEWEB)

    Burgert, S.

    2002-10-21

    The National Renewable Energy Laboratory's Thermal Test Facility in Golden, Colorado, was designed using a whole-building approach--looking at the way the building's systems worked together most efficiently. Researchers monitor the performance of the 11,000-square-foot building, which boasts an energy cost savings of 63% for heating, cooling, and lighting. The basic plan of the building can be adapted to many needs, including retail and warehouse space. The Thermal Test Facility contains office and laboratory space; research focuses on the development of energy-efficiency and renewable energy technologies that are cost-effective and environmentally friendly.

  1. Nano-structure multilayer technology fabrication of high energy density capacitors for the power electronic building book

    Energy Technology Data Exchange (ETDEWEB)

    Barbee, T.W.; Johnson, G.W.; Wagner, A.V.

    1997-10-21

    Commercially available capacitors do not meet the specifications of the Power Electronic Building Block (PEBB) concept. We have applied our propriety nanostructure multilayer materials technology to the fabrication of high density capacitors designed to remove this impediment to PEBB progress. Our nanostructure multilayer capacitors will also be enabling technology in many industrial and military applications. Examples include transient suppression (snubber capacitors), resonant circuits, and DC filtering in PEBB modules. Additionally, weapon applications require compact energy storage for detonators and pulsed-power systems. Commercial applications run the gamut from computers to lighting to communications. Steady progress over the last five years has brought us to the threshold of commercial manufacturability. We have demonstrated a working dielectric energy density of > 11 J/cm3 in 20 nF devices designed for 1 kV operation.

  2. 20 CFR 656.21 - Supervised recruitment.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Supervised recruitment. 656.21 Section 656.21... Supervised recruitment. (a) Supervised recruitment. Where the Certifying Officer determines it appropriate, post-filing supervised recruitment may be required of the employer for the pending application or...

  3. Educational Supervision Appropriate for Psychiatry Trainee's Needs

    Science.gov (United States)

    Rele, Kiran; Tarrant, C. Jane

    2010-01-01

    Objective: The authors studied the regularity and content of supervision sessions in one of the U.K. postgraduate psychiatric training schemes (Mid-Trent). Methods: A questionnaire sent to psychiatry trainees assessed the timing and duration of supervision, content and protection of supervision time, and overall quality of supervision. The authors…

  4. 32 CFR 727.11 - Supervision.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 5 2010-07-01 2010-07-01 false Supervision. 727.11 Section 727.11 National... Supervision. The Judge Advocate General will exercise supervision over all legal assistance activities in the Department of the Navy. Subject to the supervision of the Judge Advocate General, officers in charge of...

  5. Assessment of Capacity Building by UN Centre For Space Science and Technology Education in Asia and Pacific

    Science.gov (United States)

    Mukund, Rao; Deekshatulu, B. L.; Sundarramiah, V.; Kasturirangan, K.

    2002-01-01

    Space technology has introduced new dimensions into the study and understanding of Earth's processes and in improving the quality of life for the humanity. The benefits from the space technology are mostly confined to the space faring nations. United Nations Office for Outer Space Affairs (UN-OOSA) has taken initiative to disseminate the scientific and technology knowledge to developing countries through the establishment of regional Centres mainly dedicated to the education, training and research. The establishment of the UN Centre for Space Science and Technology Education in Asia and the Pacific (UN CSSTE-AP), in 1995 in India, has opened up new vistas for sharing and learning from experiences and also in capacity building in the region. The Centre has education and research programmes in the field of Remote Sensing, Satellite Communications, Satellite Meteorology and Space Sciences. The education courses are comprising of two phases viz. Phase I, of 9 months duration and is a resident programme in India. The 9 months programme is modular in structure dealing with fundamentals, applications and pilot projects. The Phase II, of 12 months duration, concludes with the submission of a project work assignment in the home country institution. The research programmes are oriented towards carrying out advanced research and development in these fields and provides an opportunity to Asia Pacific students to build their academic capabilities. The education course curriculum is primarily aimed to disseminate the Space Science and Technology in the Asia Pacific region and draws on the experiences and needs of the region. The Centre also assists in research and consultancy in environmental analysis, monitoring, judicious exploitation, rural/urban communication, understanding weather system, conservation of natural resources and sustainable development. The issues are of utmost importance in the backdrop of high population density, unstable economic status, depleting natural

  6. Discussion on Application Technology of Building Energy Efficiency in China%我国建筑节能的技术探讨

    Institute of Scientific and Technical Information of China (English)

    郭凯

    2015-01-01

    Building energy efficiency can reduce the growth in the total energy consumption of the building speed, this paper mainly expounds the recently the focus of the work of building energy conservation in our country, gradually strengthen control on building energy consumption of the actual operation, strengthen the building energy-saving technology and technology innovation etc..%建筑节能可以降低建筑总能耗增长的速度。本文主要阐述了近期我国建筑节能的工作重点、逐步加强对建筑实际运行能耗的控制、加强建筑节能的技术基础和技术创新等问题。

  7. An overview of China’s building energy saving technologies%中国建筑节能技术概述

    Institute of Scientific and Technical Information of China (English)

    陈忠民

    2014-01-01

    Under the background of global climate change and energy shortages,from the energy saving of building envelope structure,building equipment energy saving,renewable energy application,building energy management etc. ,summarizeds the existing building energy saving tech-nology in our country,provided reference for further research on for building energy efficiency technology.%在全球气候变化和能源短缺的背景下,从建筑围护结构的节能、建筑设备的节能、可再生能源的应用、建筑能源管理等角度出发,总结了我国已有的建筑节能技术,为建筑节能技术的进一步研究提供了参考借鉴。

  8. Research on Technology and Development Direction of Steel Structure Building%建筑钢结构技术与发展方向研究

    Institute of Scientific and Technical Information of China (English)

    张俏; 董羽

    2014-01-01

    In recent years, with the wide application of steel structure in industrial buildings and public buildings, building steel structure of the new technology, new processes and new materials continue to bring forth the new through the old, this paper built in recent years at home and abroad, build_ing steel structure, the introduction of new technology and devel_opment direction of construction steel.%近些年来,随着建筑钢结构在工业建筑和公共建筑中的广泛应用,建筑钢结构的新技术、新工艺和新材料不断推陈出新,本文结合近些年国内外在建筑钢结构的建造的实例,介绍建筑钢结构新技术与发展方向。

  9. Capacity building, scientific independence, and the development of UNESCOs science and technology agenda for Africa’

    DEFF Research Database (Denmark)

    Andersen, Casper

    2017-01-01

    This article analyses the shifting rationales for scientific collaboration in the work of the United Nations Economic, Scientific and Cultural Organization (UNESCO) in the science sector in Africa from the late colonial period through to the era of capacity building. Focusing on the late colonial...... capacities in the sciences was regarded as the key to obtaining “scientific independence” to match the recently obtained political independence. This marked a significant change from the 1950s when UNESCO based its operations in Africa on collaborations with the European colonial powers. The article argues...... that the link between scientific independence and political self-determination gave way as UNESCO rebranded scientific capacity-building activities as efforts in the pursuit of an unclearly-defined common good....

  10. MOTIVATION TO SHARE HOSPITAL BUILDING DESIGN KNOWLEDGE BY INFORMATION TECHNOLOGY IN HONG KONG

    OpenAIRE

    Li, Rita Yi Man; Rita PEIHUA Zhang

    2010-01-01

    Hospital building design is important as it is the place where bacteria and microorganisms concentrate. Poor ventilation system and layout traps disease causing pathogens, threatens the lives of many frontline workers such as doctors, nurses, and health care assistants. While design knowledge sharing by IT ensures a rapid knowledge sharing among designers from all over the world, what are their motivations? Few or no paper has studied this issue. This paper studies this base on 4 traditional ...

  11. Technological characteristics of compressed earth blocks for its use as a building material

    Science.gov (United States)

    Gomez-Villalba, Luz Stella; Camacho-Perez, Nancy; Alvarez de Buergo, Monica; Becerra-Becerra, Javier; Esmeralda Corredor-Pulido, Dery; Fort, Rafael

    2013-04-01

    We present here an innovative building technique, which uses ecological, inexpensive and environmentally friendly materials. These compressed earth blocks seem to be very good for building purposes and that is why we have characterized three types of compressed earth blocks (CEB, named by their color as yellow, grey and red) mineralogically by means of X ray diffraction XRD and scanning electron microscopy SEM (both blocks and raw materials), petrographically by polarizing optical light microscopy POLM, and SEM, and, mainly, petrophysically: their hydric, physical and physico-mechanical properties by means of determining their capillary water absorption, porosity (open or accessible to water, pore size distribution and micro/macroporosity), and densities, color and ultrasound velocity (together with anisotropy). The particularities of these analyzed materials show that some varieties are more durable than others, and that all of them can be used as building materials with some restrictions related to their appropriate placing in the structures and the exposure to water. Acknowledgements: This work is supported by the GEOMATERIALES (S2009/MAT-1629) and CONSOLIDER-TCP (CSD2007-0058) programmes. Thanks also to the UCM (Complutense University of Madrid) Research Group "Alteración y conservación de los materiales pétreos del patrimonio" / Alteration and conservation of heritage stone materials (ref. 921349).

  12. Technology Solutions Case Study: Calculating Design Heating Loads for Superinsulated Buildings

    Energy Technology Data Exchange (ETDEWEB)

    None

    2015-08-01

    Designing a superinsulated home has many benefits including improved comfort, reduced exterior noise penetration, lower energy bills, and the ability to withstand power and fuel outages under much more comfortable conditions than a typical home. Extremely low heating and cooling loads equate to much smaller HVAC equipment than conventionally required. Sizing the mechanical system to these much lower loads reduces first costs and the size of the distribution system needed. While these homes aren't necessarily constructed with excessive mass in the form of concrete floors and walls, the amount of insulation and the increase in the thickness of the building envelope can lead to a mass effect, resulting in the structures ability to store much more heat than a code built home. This results in a very low thermal inertia making the building much less sensitive to drastic temperature swings thereby decreasing the peak heating load demand. Alternative methods that take this inertia into account along with solar and internal gains result in smaller more appropriate design loads than those calculated using Manual J version 8. During the winter of 2013/2014, the Consortium for Advanced Residential Buildings team monitored the energy use of three homes in climate zone 6 in an attempt to evaluate the accuracy of two different mechanical system sizing methods for low load homes. Based on the results, it is recommended that internal and solar gains be included and some credit for thermal inertia be used in sizing calculations for superinsulated homes.

  13. 湖北省绿色建筑技术应用分析%Application analysis of green building technology in Hubei province

    Institute of Scientific and Technical Information of China (English)

    谢宁; 唐小虎

    2015-01-01

    With an analysis of green building development conditions of Hubei province, combining with local climate and geological environ-ment, based on common green building technology survey, the paper studies the implementation conditions of green building technology, and ex-plores low-cost green building technology fitting local development.%分析了湖北省绿色建筑的发展概况,结合当地的气候及地理环境,在调查该地常用的绿建技术的基础上,对绿建技术的落实情况进行了研究,并探索了适宜该地区发展的、较低成本的绿建技术。

  14. Naturally Supervised Learning in Manipulable Technologies

    CERN Document Server

    Alicea, Bradly

    2011-01-01

    Objective: It will be argued that haptic and proprioceptive sensory inputs serve a supervisory function in movement production related to the control of virtual environments and human-machine interfaces. To accomplish this, an approach new to human factors called neuromechanics will be used. This involves the introduction of novel techniques and analyses which demonstrate the multifaceted and regulatory role of adaptation in interactions between humans and motion and touch-based (e.g. manipulable) devices and interfaces. Background: Neuromechanics is an approach that unifies the role of physiological function, motor performance, and environmental effects in determining human performance. In this paper, a neuromechanical perspective will be used to explain the supervisory role of environmental variation on human performance. Method: Three experiments are presented using two different types of virtual environment that allowed for selective perturbation. Electromyography (EMG) and information related to kinemati...

  15. BOOK REVIEW TECHNOLOGY INTEGRATION AND HIGH POSSIBILITY CLASSROOMS: BUILDING FROM TPACK

    OpenAIRE

    Nejdet KARADAG

    2016-01-01

    This book consists of 8 chapters, appeals teachers who want to understand technology integration to education and how it looks like in action in classrooms. High Possibility Classrooms (HPC) models are examined by case studies in different educational settings.

  16. Energy efficiency benchmarks and the performance of LEED rated buildings for Information Technology facilities in Bangalore, India

    Energy Technology Data Exchange (ETDEWEB)

    Sabapathy, Ashwin; Ragavan, Santhosh K.V.; Vijendra, Mahima; Nataraja, Anjana G. [Enzen Global Solutions Pvt Ltd, 90, Hosur Road, Madiwala, Bangalore 560 068 (India)

    2010-11-15

    This paper provides a summary of an energy benchmarking study that uses performance data of a sample of Information Technology facilities in Bangalore. Information provided by the sample of occupiers was used to develop an Energy Performance Index (EPI) and an Annual Average hourly Energy Performance Index (AAhEPI), which takes into account the variations in operation hours and days for these facilities. The EPI and AAhEPI were modelled to identify the factors that influence energy efficiency. Employment density, size of facility, operating hours per week, type of chiller and age of facility were found to be significant factors in regression models with EPI and AAhEPI as dependent variables. Employment density, size of facility and operating hours per week were standardised and used in a separate regression analysis. Parameter estimates from this regression were used to normalize the EPI and AAhEPI for variance in the independent variables. Three benchmark ranges - the bottom third, middle third and top third - were developed for the two normalised indices. The normalised EPI and AAhEPI of LEED rated building, which were also part of the sample, indicate that, on average, LEED rated buildings outperform the other buildings. (author)

  17. The Role of Model Making as a Constructivist Learning Tool to Enhance Deep Learning in a Building Technology Module

    Directory of Open Access Journals (Sweden)

    Una Beagon

    2014-06-01

    Full Text Available This paper explores how the use of model making assignments in a Building Technology module encourages deeper learning of a particular topic compared to traditional lecture style teaching using 2D drawings or 3D models. It also investigates how student engagement can be improved as a result of creating a ‘constructivist environment’. The assessment tool, which involved students building a model of a window jamb and cill, was designed to encourage creativity and included elements of best practice such as reflection and development of written communication skills which are important graduate attributes for employability. Quantitative analyses based on surveys carried out amongst the students indicated that, students generally enjoyed making the model and felt, as an activity improved their attention levels. Furthermore, results showed that students felt more confident about recalling the specific detail as a result of the model making exercise compared to creating 2D drawings or merely observing a 3D model. Student feedback confirmed that model making goes some way to bridge the gap between lecture material and an understanding of how buildings are constructed on site.

  18. Application of Electronic Supervision in Corruption Prevention---A Case Study of Qingdao City%电子监察在预防腐败中的应用--基于青岛市的案例研究

    Institute of Scientific and Technical Information of China (English)

    洪宇; 任建明

    2014-01-01

    电子监察是指行政监督权力的主体,利用网络信息技术再造权力运行流程,规范和监督权力行使,以实现提高行政效能和预防腐败的目标的一种手段。相对于传统的行政监察,电子监察具有独特的优势,能够丰富“预防腐败体系”的内涵和效能,越来越多地被应用于预防腐败。构建“电子监察预防腐败分析框架”,要从清除腐败的权力基础、减少腐败机会、弱化腐败动机这三个方面着手,利用电子监察、电子政务等科技手段清理行政权力,消除腐败的权力基础;规范权力行使,减少腐败机会;实现权力运行公开透明,弱化腐败动机。青岛市电子监察在预防腐败方面存在着预防腐败的领域和层次不够全面、依然受到现行监察体制的制约和缺乏全面的绩效评估三方面的不足。因此,青岛市电子监察还需要拓展预防腐败的领域和层次;改进监察点设置,优化权力监督;完善廉政监察体制;构建电子监察绩效评估体系。%Electr onic supervision is used by the subjects of administrative supervision as a means to improve executive effec-tiveness and prevent corruption. To reach the purpose, they use the operation course of power rebuilding provided by network information technology, standardize and supervise power operation. Compared with traditional administrative supervision, elec-tronic supervision has its special advantages and has increasingly been applied to corruption prevention. Taking the electronic supervision system of Qingdao City as an example, this paper builds an analytical framework of utilizing electronic supervision system to prevent corruption, explaining the mechanism of corruption prevention through electronic supervision practiced by Qingdao City, and its effectiveness from the aspects of cleaning up the power base of corruption, reducing opportunities for cor-ruption and weakening the motivation

  19. Two 175 ton geothermal chiller heat pumps for leed platinum building technology demonstration project. Operation data, data collection and marketing

    Energy Technology Data Exchange (ETDEWEB)

    Kolo, Daniel [Johnson Controls, Inc., Glendale, WI (United States)

    2016-08-15

    The activities funded by this grant helped educate and inform approximately six thousand individuals who participated in guided tours of the geothermal chiller plant at Johnson Controls Corporate Headquarters in Glendale, Wisconsin over the three year term of the project. In addition to those who took the formal tour, thousands more were exposed to hands-on learning at the self-service video kiosks located in the headquarters building and augmented reality tablet app that allowed for self-guided tours. The tours, video, and app focused on the advantages of geothermal heat pump chillers, including energy savings and environmental impact. The overall tour and collateral also demonstrated the practical application of this technology and how it can be designed into a system that includes many other sustainable technologies without sacrificing comfort or health of building occupants Among tour participants were nearly 1,000 individuals, representing 130 organizations identified as potential purchasers of geothermal heat pump chillers. In addition to these commercial clients, tours were well attended by engineering, facilities, and business trade groups. This has also been a popular tour for groups from Universities around the Midwest and K-12 schools from Wisconsin and Northern Illinois A sequence of operations was put into place to control the chillers and they have been tuned and maintained to optimize the benefit from the geothermal water loop. Data on incoming and outgoing water temperature and flow from the geothermal field was logged and sent to DOE monthly during the grant period to demonstrate energy savings.

  20. Preparing Your School Building for Technology. Proceedings of the Council of Education Facility Planners International (CEFPI) Conference (Vancouver, British Columbia, Canada, October 4-7, 1998).

    Science.gov (United States)

    Council of Educational Facility Planners, International, Scottsdale, AZ.

    Participants in the 1998 annual technology conference of the Council of Educational Facility Planners, International discussed adapting today's school buildings to meet the new educational technology. This document presents the presentation materials (mostly copies of slides or transparencies, with little or no accompanying text) delivered by…

  1. Multivoiced Supervision of Master's Students: A Case Study of Alternative Supervision Practices in Higher Education

    Science.gov (United States)

    Dysthe, Olga; Samara, Akylina; Westrheim, Kariane

    2006-01-01

    This article describes and analyzes an alternative supervision model at the Master of Education Programme at the University of Bergen aimed at improving research supervision. A three-pronged approach was introduced, combining supervision groups, student colloquia and individual supervision. The supervision groups consisted of two supervisors and…

  2. Clinical supervision in a community setting.

    Science.gov (United States)

    Evans, Carol; Marcroft, Emma

    Clinical supervision is a formal process of professional support, reflection and learning that contributes to individual development. First Community Health and Care is committed to providing clinical supervision to nurses and allied healthcare professionals to support the provision and maintenance of high-quality care. In 2012, we developed new guidelines for nurses and AHPs on supervision, incorporating a clinical supervision framework. This offers a range of options to staff so supervision accommodates variations in work settings and individual learning needs and styles.

  3. Clinical supervision: the state of the art.

    Science.gov (United States)

    Falender, Carol A; Shafranske, Edward P

    2014-11-01

    Since the recognition of clinical supervision as a distinct professional competence and a core competence, attention has turned to ensuring supervisor competence and effective supervision practice. In this article, we highlight recent developments and the state of the art in supervision, with particular emphasis on the competency-based approach. We present effective clinical supervision strategies, providing an integrated snapshot of the current status. We close with consideration of current training practices in supervision and challenges.

  4. Analysis on technological points of high-rise building construction%高层建筑施工技术要点分析

    Institute of Scientific and Technical Information of China (English)

    王鹏飞

    2012-01-01

    Combining with the practice, the paper discusses the high-rise building construction features and status, rather comprehensively sum- marizes the high-rise building construction technology points including reverse construction technology, prefabrication plate technology, steel structure and pumping concrete technology, so as to strengthen the validity and effectiveness of the high-rise building construction.%结合实际论述了高层建筑施工的特征及现状,较全面地归纳了高层建筑施工技术要点,包括逆向施工技术、预制模板技术、钢结构及泵送混凝土技术,从而增强了高层建筑施工的有效性与实效性。

  5. Universities in capacity building in sustainable development: focus on solid waste management and technology.

    Science.gov (United States)

    Agamuthu, P; Hansen, Jens Aage

    2007-06-01

    This paper analyses some of the higher education and research capacity building experiences gained from 1998-2006 by Danish and Malaysian universities. The focus is on waste management, directly relating to both the environmental and socio-economic dimensions of sustainable development. Primary benefits, available as an educational legacy to universities, were obtained in terms of new and enhanced study curricula established on Problem-oriented Project-based Learning (POPBL) pedagogy, which strengthened academic environmental programmes at Malaysian and Danish universities. It involved more direct and mutually beneficial cooperation between academia and businesses in both countries. This kind of university reach-out is considered vital to development in all countries actively striving for global and sustainable development. Supplementary benefits were accrued for those involved directly in activities such as the 4 months of field studies, workshops, field courses and joint research projects. For students and academics, the gains have been new international dimensions in university curricula, enhanced career development and research collaboration based on realworld cases. It is suggested that the area of solid waste management offers opportunities for much needed capacity building in higher education and research, contributing to sustainable waste management on a global scale. Universities should be more actively involved in such educational, research and innovation programmes to make the necessary progress. ISWA can support capacity building activities by utilizing its resources--providing a lively platform for debate, securing dissemination of new knowledge, and furthering international networking beyond that which universities already do by themselves. A special challenge to ISWA may be to improve national and international professional networks between academia and business, thereby making education, research and innovation the key driving mechanisms in

  6. Tianjin Textile Museum Opened Up & The Launching Ceremony of Tianjin Textile Building Staged

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    @@ The opening of Tianjin Textile Museum and the launching ceremony of Tianjin Textile Building were staged in Tianjin hi-tech textile industrial park on May 8. Chen Shujin, Vice President of China Textile Industry Association, Li Yuanchao, director of Tianjin Municipal Commission of Economy and Information Technology, the Deputy Secretary of Land and Resources,the Deputy Secretary of Technical Supervision Administration, and representatives of other group companies attended the ceremony.

  7. Workshop Introduction - Building Energy Performance Improvement Through Advanced Technologies, Smart Organization, and Financing

    Science.gov (United States)

    2004-09-01

    A&M University, ESL Continuous Commissioning—An Effective Method for Energy Reductions Ch 5 14:00-14:15 Mr. Michael Chimack, University of Illinois...PNNL Energy assessment and analysis using FEDS Ch 7 8:45-9:00 Dr. Michael Witte, GardAnalytics Whole building energy analysis using EnergyPlus 9:00-9...Assessment of HVAC systems reliability 14:30-15:00 Coffee break Ch 8 15:00-15:15 Mr. Roch Ducey , ERDC-CERL Energy Security 15:15-15:30 Mr

  8. Building Technological Capabilities in Ghanaian SMEs through Private Sector Development Programmes

    DEFF Research Database (Denmark)

    Kragelund, Jens Peter

    2005-01-01

    Since the beginning of the 1990s an increasing number of donors have initiated pro-grammes to support the private sector in developing countries in order to enhance eco-nomic growth and thereby alleviate poverty. This paper uses case studies of a wide spec-trum of private enterprises in Ghana...... and related business entities to illustrate how the private sector programme of Danida has worked in Ghana. It looks into the direct effects of the programme, i.e. capability building and simultaneously shows how conventional evaluation procedures miss many of the derived effects of the programme....

  9. MOTIVATION TO SHARE HOSPITAL BUILDING DESIGN KNOWLEDGE BY INFORMATION TECHNOLOGY IN HONG KONG

    Directory of Open Access Journals (Sweden)

    Rita Yi Man LI

    2010-06-01

    Full Text Available Hospital building design is important as it is the place where bacteria and microorganisms concentrate. Poor ventilation system and layout traps disease causing pathogens, threatens the lives of many frontline workers such as doctors, nurses, and health care assistants. While design knowledge sharing by IT ensures a rapid knowledge sharing among designers from all over the world, what are their motivations? Few or no paper has studied this issue. This paper studies this base on 4 traditional motivation theories: Theory X, Theory Y, Reinforcement theory, Two factor theory. Results show that positive reinforcement theory and motivation factors in two factor theory provide better explanation.

  10. Technology Solutions for Existing Homes Case Study: Trade-Friendly Retrofit Insulated Panels for Existing Buildings

    Energy Technology Data Exchange (ETDEWEB)

    None

    2016-03-01

    For this project with the U.S. Department of Energy Building America team Home Innovation Research Labs, the retrofit insulated panels relied on an enhanced expanded polystyrene (EPS) for thermal resistance of R-4.5/inch, which is an improvement of 10% over conventional (white-colored) EPS. EPS, measured by its life cycle, is an alternative to commonly used extruded polystyrene and spray polyurethane foam. It is a closed-cell product made up of 90% air, and it requires about 85% fewer petroleum products for processing than other rigid foams.

  11. A Study on Nuclear Blast Overpressure on Buildings and other infrastructures using Geospatial Technology

    Directory of Open Access Journals (Sweden)

    D. Thirumalaivasan

    2012-01-01

    Full Text Available An Improvised Nuclear Device or nuclear bomb of yield 10 kiloton to 20 kiloton explodes in any major city due to terrorism or any other reason can cause catastrophic damages on the building's and other infrastructures and also shutting down of critical life-safety systems.. The explosion may produce blast overpressure, thermal radiation and harmful instant and delayed nuclear radiations. The buildings and other Civil Engineering structures may be highly vulnerabke due to the blast overpressure from the explosion and thermal radiation. In this present study Remote Sensing and Geographical Information System is effectively utilized to model the blast affected zone from the ground Zero of the study area. This study also introduces different emperical methods to estimate blast loads and structural response. The purpose is to describe the blast effects of a nuclear explosion, thereby informing people of the real dangers posed by nuclear weapons. Therefore, as a case study, we consider a hypothetical City as a target for detonation. Due to security reasons the data for existing City is not used for this study purpose. The study area is hypothetically detonated with a 15 kiloton yield nuclear explosion as surface blast and wind spped is assumed as 5 meters per second.

  12. InterTechnology Corporation report of solar energy systems installation costs for selected commercial buildings

    Energy Technology Data Exchange (ETDEWEB)

    None

    1976-12-01

    The results of a study in which the primary objective was to determine actual costs associated with the installation of solar collector and thermal energy storage subsystems in specific non-residential building applications are presented. A secondary objective of the study was to assemble details of existing solar collector and storage subsystem installations, including caveats concerning cost estimating, logistics and installation practices. The study began with the development of an exhaustive listing and compilation of basic data and contacts for non-residential applications of solar heating and cooling of buildings. Both existing projects and those under construction were surveyed. Survey summary sheets for each project encountered are provided as a separate appendix. Subsequently, the rationale used to select the projects studied in-depth is presented. The results of each of the detailed studies are then provided along with survey summary sheets for each of the projects studied. Installation cost data are summarized and the significance of the differences and similarities between the reported projects is discussed. After evaluating the data obtained from the detailed studies, methods for reducing installation labor costs are postulated based on the experience of the study. Some of the methods include modularization of collectors, preplumbing and preinsulating, and collector placement procedures. Methods of cost reduction and a summary discussion of prominent problems encountered in the projects are considered.(WHK)

  13. Energy management through building automation. Fundamentals - Technologies - Applications; Energiemanagement durch Gebaeudeautomation. Grundlagen - Technologien - Anwendungen

    Energy Technology Data Exchange (ETDEWEB)

    Aschendorf, Bernd [Fachhochschule Dortmund (Germany). Fachbereich Informations- und Elektrotechnik

    2014-02-01

    The books available in the market consider only the use of individual buildings bus systems, but not to compare with each other with respect to cost-benefit and applicability. In this book, a total of 40 different systems, such as radio bus systems, PEHA-PHC, EIB, LCN, LON, PLC systems, investigated for their possible use in the various categories of buildings. The comparison refers to all levels of the automation pyramid from fieldbus, to automation to the control level and considers in particular the usability for SmartMetering-based energy management. [German] Die am Markt vorhandenen Buecher betrachten lediglich den Einsatz einzelner Gebaeudebussysteme, nicht jedoch den Vergleich untereinander mit Bezug auf Kosten/Nutzen und Anwendbarkeit. In diesem Buch werden insgesamt 40 verschiedene Systeme, wie z.B. Funkbussysteme, PEHA-PHC, EIB-, LCN-, LON-, SPS-Systeme, auf deren Einsatzmoeglichkeit in den verschiedenen Gebaeudekategorien untersucht. Der Vergleich bezieht sich auf alle Ebenen der Automatisierungspyramide vom Feldbus ueber die Automatisierung bis zur Leitebene und betrachtet insbesondere auch die Verwendbarkeit fuer smartMetering-basiertes Energiemanagement.

  14. Machine Learning Techniques Applied to Sensor Data Correction in Building Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Matt K [ORNL; Castello, Charles C [ORNL; New, Joshua Ryan [ORNL

    2013-01-01

    Since commercial and residential buildings account for nearly half of the United States' energy consumption, making them more energy-efficient is a vital part of the nation's overall energy strategy. Sensors play an important role in this research by collecting data needed to analyze performance of components, systems, and whole-buildings. Given this reliance on sensors, ensuring that sensor data are valid is a crucial problem. Solutions being researched are machine learning techniques, namely: artificial neural networks and Bayesian Networks. Types of data investigated in this study are: (1) temperature; (2) humidity; (3) refrigerator energy consumption; (4) heat pump liquid pressure; and (5) water flow. These data are taken from Oak Ridge National Laboratory's (ORNL) ZEBRAlliance research project which is composed of four single-family homes in Oak Ridge, TN. Results show that for the temperature, humidity, pressure, and flow sensors, data can mostly be predicted with root-mean-square error (RMSE) of less than 10% of the respective sensor's mean value. Results for the energy sensor are not as good; RMSE are centered about 100% of the mean value and are often well above 200%. Bayesian networks have RSME of less than 5% of the respective sensor's mean value, but took substantially longer to train.

  15. Innovative technologies of outsourcing at the machine-building enterprises of Sverdlovsk area

    Directory of Open Access Journals (Sweden)

    P. P. Krylatkov

    2010-09-01

    Full Text Available The analysis of the basic problems connected with infringements of integrity of the machine-building enterprises of Sverdlovsk area is lead in the article. The specified problems are considered from a position of the complete approach developed by the author. Display of infringements of integrity of some the enterprises are illustrated by data of their inspection. As the effective tool of increase of integrity of the enterprises — expansion use of attitudes of outsourcing is offered. The comparative given applications of outsourcing in developed the country of the West and at the domestic enterprises, and also its benefits and risks are cited. Outsourcing, insoursing and subcontracting are considered by the author as the innovative tool of the decision of many serious problems of the machine-building enterprises of region. As an example practice of work of «The Sverdlovsk regional center of industrial cooperation» on coordination of attitudes of outsourcing, subcontracting and cooperation is offered. The author recommends the tabulated form, with the instruction of kinds of works for which performance the method of allocation or attraction outsourcing of the companies can be used.

  16. Fast implementation of Oliker's ellipses technology to build free form reflector

    Science.gov (United States)

    Magarill, S.

    2013-09-01

    The field of illumination optics has a number of applications where using free-form reflective surfaces to create a required light distribution can be beneficial. Oliker's concept of combining elliptical surfaces is the foundation of forming a reflector for an arbitrary illuminance distribution. The algorithm for fast implementation of this concept is discussed in detail. It is based on an analytical computation of a 3D cloud of points in order to map the reflector shape with the required flux distribution. Flux delivered to chosen zones across the target can be calculated based on the number of associated cloud points and its locations. This allows optimized ellipse parameters to achieve the required flux distribution without raytracing through the reflector geometry. Such a strictly analytical optimization is much faster than building reflector geometry and raytracing each step of the optimization. A generated 3D cloud of points can be used with a standard SolidWorks feature to build the loft surface. This surface consists of adjacent elliptical facets and should be smooth to maintain continuous irradiance across the target. A secondary operation to smooth the surface profile between elliptical facets is discussed. Examples of proposed algorithm implementations are presented.

  17. The Al-containing wastes technology of recycling for alumina, coagulants and building materials production

    Institute of Scientific and Technical Information of China (English)

    Lainer; U.; A.; Tuzhilin; A.; S.; Perekhoda; S.; P.; Vetchinkina; T.; N.; Samoilov; E.; N.

    2005-01-01

    The Al-containing wastes are generated by a row of industrial plants as hydroalumocarbonate residuum, underwastes water, foundry slag, mud, catalysts, mineral part of coals and others. These wastes is cycling in technological processes that cause to extra energy costs, processes stages difficulties and negatively affecting to environment.……

  18. Advanced Technological Education (ATE) Program: Building a Pipeline of Skilled Workers. Policy Brief

    Science.gov (United States)

    American Youth Policy Forum, 2010

    2010-01-01

    In the Fall of 2008, the American Youth Policy Forum hosted a series of three Capitol Hill forums showcasing the Advanced Technological Education (ATE) program supported by the National Science Foundation (NSF). The goal of these forums was to educate national policymakers about the importance of: (1) improving the science and math competencies of…

  19. The Al-containing wastes technology of recycling for alumina, coagulants and building materials production

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    @@ The Al-containing wastes are generated by a row of industrial plants as hydroalumocarbonate residuum, underwastes water, foundry slag, mud, catalysts, mineral part of coals and others. These wastes is cycling in technological processes that cause to extra energy costs, processes stages difficulties and negatively affecting to environment.

  20. International technology transfer: building theory from a multiple case-study in the aircraft industry

    NARCIS (Netherlands)

    Steenhuis, Harm-Jan; Bruijn, de Erik J.

    2005-01-01

    International technology transfer occurs frequently in international operations, for example in cases of foreign direct investment where companies set-up existing manufacturing lines in new locations. It also occurs in situations of international outsourcing where a new supplier receives product and

  1. Building Software Development Capacity to Advance the State of Educational Technology

    Science.gov (United States)

    Luterbach, Kenneth J.

    2013-01-01

    Educational technologists may advance the state of the field by increasing capacity to develop software tools and instructional applications. Presently, few academic programs in educational technology require even a single computer programming course. Further, the educational technologists who develop software generally work independently or in…

  2. Building a Better Biology Lab? Testing Tablet PC Technology in a Core Laboratory Course

    Science.gov (United States)

    Pryor, Gregory; Bauer, Vernon

    2008-01-01

    Tablet PC technology can enliven the classroom environment because it is dynamic, interactive, and "organic," relative to the rigidity of chalkboards, whiteboards, overhead projectors, and PowerPoint presentations. Unlike traditional computers, tablet PCs employ "digital linking," allowing instructors and students to freehand annotate, clarify,…

  3. Exploring the Relationships between Pedagogy, Ethics and Technology: Building a Framework for Strategy Development

    Science.gov (United States)

    Jefferies, Pat; Carsten-Stahl, Bernd; McRobb, Steve

    2007-01-01

    The various political and technological drivers that are currently prevalent within many educational institutions increasingly encourage educationalists to experiment with tools that promote e-learning. Many then engage in this activity in the belief that this will help in the development of more autonomous, responsible learners. Strategies for…

  4. Review of thermal energy storage technologies based on PCM application in buildings

    DEFF Research Database (Denmark)

    Pomianowski, Michal Zbigniew; Heiselberg, Per; Zhang, Yinping

    2013-01-01

    is paid to discussion and identification of proper methods to correctly determine the thermal properties of PCM materials and their composites and as well procedures to determine their energy storage and saving potential. The purpose of the paper is to highlight promising technologies for PCM application...

  5. Building on Authentic Learning for Pre-Service Teachers in a Technology-Rich Environment

    Science.gov (United States)

    Latham, Gloria; Carr, Nicky

    2015-01-01

    The article "Authentic learning for pre-service teachers in a technology-rich environment" (Latham & Carr, 2012) appeared in the "Journal of Learning Design," Volume 5, Issue 1 in 2012. Since writing this paper three years ago, the authors reflect upon and brainstorm what they describe here as a radically revised approach.…

  6. Teaching as a Design Science: Building Pedagogical Patterns for Learning and Technology

    Science.gov (United States)

    Laurillard, Diana

    2012-01-01

    Teaching is changing. It is no longer simply about passing on knowledge to the next generation. Teachers in the twenty-first century, in all educational sectors, have to cope with an ever-changing cultural and technological environment. Teaching is now a design science. Like other design professionals--architects, engineers, programmers--teachers…

  7. Networks and network resources in technological innovation systems : Towards a conceptual framework for system building

    NARCIS (Netherlands)

    Musiolik, J.; Markard, J.; Hekkert, M.P.

    2012-01-01

    Previous research has shown that formal networks can play a crucial role in the formation of technological innovation systems (TIS). Firms and other actors collaborate in formal networks not only to generate new knowledge but also to strategically create and shape supportive system resources such as

  8. Building Software Development Capacity to Advance the State of Educational Technology

    Science.gov (United States)

    Luterbach, Kenneth J.

    2013-01-01

    Educational technologists may advance the state of the field by increasing capacity to develop software tools and instructional applications. Presently, few academic programs in educational technology require even a single computer programming course. Further, the educational technologists who develop software generally work independently or in…

  9. 地理信息系统在财政投资项目监管中的应用%Application of Geographic Information System in Financial Supervision

    Institute of Scientific and Technical Information of China (English)

    张国合; 谢孟利; 翟娅娟; 王石岩

    2013-01-01

    针对目前省级财政投资项目难于监管的特点,重点研究了空间信息技术应用于财政投资监管的问题,建立了财政投资监管模式,依托于省级地理信息公共服务平台,研发了财政投资监管地理信息系统,实现了财政投资项目的空间化管理,使财政投资监管的业务工作更加直观、便捷和高效。%Currently, provincial finance investment projects are difficult to supervise, after discussing the problems of space information technology in the financial investment supervision, this article build up a spatial management mode. Based on the provincial geographic information public service platform, we developed a geographical information system of supervision of financial investment. The system realizes the spatial management of financial investments, and makes the work of supervision of the financial investment become more intuitive, convenient, and efficient.

  10. Challenges for Better thesis supervision.

    Science.gov (United States)

    Ghadirian, Laleh; Sayarifard, Azadeh; Majdzadeh, Reza; Rajabi, Fatemeh; Yunesian, Masoud

    2014-01-01

    Conduction of thesis by the students is one of their major academic activities. Thesis quality and acquired experiences are highly dependent on the supervision. Our study is aimed at identifing the challenges in thesis supervision from both students and faculty members point of view. This study was conducted using individual in-depth interviews and Focus Group Discussions (FGD). The participants were 43 students and faculty members selected by purposive sampling. It was carried out in Tehran University of Medical Sciences in 2012. Data analysis was done concurrently with data gathering using content analysis method. Our data analysis resulted in 162 codes, 17 subcategories and 4 major categories, "supervisory knowledge and skills", "atmosphere", "bylaws and regulations relating to supervision" and "monitoring and evaluation". This study showed that more attention and planning in needed for modifying related rules and regulations, qualitative and quantitative improvement in mentorship training, research atmosphere improvement and effective monitoring and evaluation in supervisory area.

  11. "Watts per person" paradigm to design net zero energy buildings: Examining technology interventions and integrating occupant feedback to reduce plug loads in a commercial building

    Science.gov (United States)

    Yagi Kim, Mika

    As building envelopes have improved due to more restrictive energy codes, internal loads have increased largely due to the proliferation of computers, electronics, appliances, imaging and audio visual equipment that continues to grow in commercial buildings. As the dependency on the internet for information and data transfer increases, the electricity demand will pose a challenge to design and operate Net Zero Energy Buildings (NZEBs). Plug Loads (PLs) as a proportion of the building load has become the largest non-regulated building energy load and represents the third highest electricity end-use in California's commercial office buildings, accounting for 23% of the total building electricity consumption (Ecova 2011,2). In the Annual Energy Outlook 2008 (AEO2008), prepared by the Energy Information Administration (EIA) that presents long-term projections of energy supply and demand through 2030 states that office equipment and personal computers are the "fastest growing electrical end uses" in the commercial sector. This thesis entitled "Watts Per Person" Paradigm to Design Net Zero Energy Buildings, measures the implementation of advanced controls and behavioral interventions to study the reduction of PL energy use in the commercial sector. By integrating real world data extracted from an energy efficient commercial building of its energy use, the results produce a new methodology on estimating PL energy use by calculating based on "Watts Per Person" and analyzes computational simulation methods to design NZEBs.

  12. Building a Better Book in the Browser (Using Semantic Web technologies and HTML5

    Directory of Open Access Journals (Sweden)

    Jason A. Clark

    2015-07-01

    Full Text Available The library as place and service continues to be shaped by the legacy of the book. The book itself has evolved in recent years, with various technologies vying to become the next dominant book form. In this article, we discuss the design and development of our prototype software from Montana State University (MSU Library for presenting books inside of web browsers. The article outlines the contextual background and technological potential for publishing traditional book content through the web using open standards. Our prototype demonstrates the application of HTML5, structured data with RDFa and Schema.org markup, linked data components using JSON-LD, and an API-driven data model. We examine how this open web model impacts discovery, reading analytics, eBook production, and machine-readability for libraries considering how to unite software development and publishing.

  13. Study on Dynamic Supervision of the RFID Technology on Measuring Instruments%利用RFID技术对计量器具进行动态监管探讨

    Institute of Scientific and Technical Information of China (English)

    郑培强

    2012-01-01

    现阶段市场上的电子秤和加油机作弊现象屡禁不止,这严重损害了消费者的利益。随着物联网技术的兴起,各种物体可以通过互联的方式来达到信息的共享,而RFID是物联网的重要组成部分,本文就如何利用RFID技术对计量器具进行监管和控制,从构建模型到软硬件架构设计方面提出解决思路,供监管机构和计量技术机构参考。%At this stage the cheating of electroinc scales and tanker in the market still happens despite repeated prohibition, it seriously damages the interests of consumers. With the rise of networking technology, various objects can be achieved information sharing by intemet, the RFID is an important part of networking. This paper proposes solutions about how to use RFID technology to monitor and control the measurement instruments, from building the model to hardware and software architecture design, which provide a reference for regulatory agencies and measurement techniques authorities.

  14. Intelligent building management system based on IOT technology%基于物联网技术的智能楼宇管理系统

    Institute of Scientific and Technical Information of China (English)

    张新

    2014-01-01

    智能楼宇已成为现代智能化建筑的发展方向。物联网技术的兴起,给智能楼宇增添了新的活力。文中就物联网中的RFID射频识别、无线传感网等技术在智能楼宇中的应用进行了探讨,并介绍了智能楼宇的五大子系统的设计方法。%Intelligent building has become the development direction of modern intelligent architecture. The rise of IOT technology added new vigor to the intelligent building. The application of RFID and wireless sensor network technology in intelligent building are discussed, and the design method of ifve subsystems of intelligent building is introduced at a certain degree.

  15. 节能建筑施工技术的分析和研究%Analysis and research on energy-saving building construction technology

    Institute of Scientific and Technical Information of China (English)

    朱靖宇

    2014-01-01

    The paper briefly analyzes domestic energy development problems. In light of energy-saving building construction technology status, it explores general energy-saving building construction demands, and describes energy-saving building construction technology measures, with a view to create high-quality and energy-saving building and provide good living environment.%简要分析了我国能源发展存在的问题,并针对节能建筑施工技术的现状,探讨了节能建筑施工的一般要求,详细阐述了节能建筑施工技术措施,以期创造出质量优、节能好的建筑,为人们提供优良的生活环境。

  16. 高层建筑钢结构安装施工技术%Construction technology of steel structure installation of high-rise buildings

    Institute of Scientific and Technical Information of China (English)

    藏勤峰

    2014-01-01

    This paper introduced the common higher intersection operation technology construction requirements, the steel structure easily affect-ed by natural conditions in high-rise building, deeply introduced the steel structure installation and construction technology of high-rise build-ings, in order to realize the steel structure construction optimization of high-rise buildings.%对高层建筑中钢结构易受自然条件影响、常出现立体交叉作业及施工要求较高的特点进行了介绍,并对高层建筑钢结构安装施工技术进行了深入研究,旨在进一步实现高层建筑钢结构施工的优化。

  17. Combining Unsupervised and Supervised Learning for Discovering Disease Subclasses

    OpenAIRE

    Tucker, A; Bosoni, P; Bellazzi, R.; Nihtyanova, S; Denton, C.

    2016-01-01

    Diseases are often umbrella terms for many subcategories of disease. The identification of these subcategories is vital if we are to develop personalised treatments that are better focussed on individual patients. In this short paper, we explore the use of a combination of unsupervised learning to identify potential subclasses, and supervised learning to build models for better predicting a number of different health outcomes for patients that suffer from systemic sclerosis, a rare chronic co...

  18. 楼宇自动化系统技术第一讲楼字自动化系统工程概述%Technology of Building Automation System Lecture 1 Overview of Building Automation System Engineering

    Institute of Scientific and Technical Information of China (English)

    程大章

    2011-01-01

    Building antomation system is an important part of modern architecture. It played an improtant role in intelligent building, green building, and low-carbon building, and it will be the basis of one system of smart city. Starting from the intelligent and information needs of green building, and the development space of intelligent technology, the generalized and narrow sense of building automation system were introduced in detail, and the running management of building was analyzed and researched. It was pointed out that the building automation system must be planning and designing from angle of the life cycle cost of building when managing the intelligent building according to modern facilities management ways.%楼宇自动化系统是现代建筑的重要组成部分,在智能建筑、绿色建筑与低碳建筑中具有举足轻重的作用,并将成为智慧城市的基础系统之一。为此,从绿色建筑对智能化和信息化的需求以及智能化技术的发展空间入手,对广义和狭义的楼宇自动化系统作了详细的介绍,并对建筑物的运行管理作了必要的分析研究。最后指出,按现代设施管理方式进行智能建筑管理,必须从建筑物生命期成本的角度规划设计楼字自动化系统。

  19. Eco-sewerage System Design for Modern Office Buildings: based on Vacuum and Source-separation Technology

    Science.gov (United States)

    Xu, Kangning; Wang, Chengwen; Zheng, Min; Yuan, Xin

    2010-11-01

    This study aimed to construct an on-site eco-sewerage system for modern office buildings in urban area based on combined innovative technologies of vacuum and source-separation. Results showed that source-separated grey water had low concentrations of pollutants, which helped the reuse of grey water. However, the system had a low separation efficiency between the yellow water and the brown water, which was caused by the plug problem in the urine collection from the urine-diverting toilets. During the storage of yellow water for liquid fertilizer production, nearly all urea nitrogen transferred to ammonium nitrogen and about 2/3 phosphorus was lost because of the struvite precipitation. Total bacteria and coliforms increased first in the storage, but then decreased to low concentrations. The anaerobic/anoxic/aerobic MBR had high elimination rates of COD, ammonium nitrogen and total nitrogen of the brown water, which were 94.2%, 98.1% and 95.1%, respectively. However, the effluent still had high contents of colority, nitrate and phosphorus, which affected the application of the effluent for flushing water. Even though, the effluent might be used as dilution water for the yellow water fertilizer. Based on the results and the assumption of an ideal operation of the vacuum source-separation system, a future plan for on-site eco-sewerage system of modern office buildings was constructed. Its sustainability was validated by the analysis of the substances flow of water and nutrients.

  20. Building enterprise-wide resilience by integrating business continuity capability into day-to-day business culture and technology.

    Science.gov (United States)

    Alesi, Patrick

    2008-04-01

    This paper follows the development of the business continuity planning (BCP) programme at Lehman Brothers following the events of September 11th. Previous attempts to implement a `traditional' form of BCP had been ineffective, but following the events, the firm began to look at BCP in a new light. This paper deals with three main themes: creating a culture of resiliency, leveraging technology, and building flexible plans. Distributing accountability for BCP to business line managers, integrating BCP change management into the normal course of business, and providing every employee with personalised BCP information breeds a culture of resiliency where people are empowered to react to events without burdensome, hierarchical response and recovery procedures. Building a strong relationship with one's application development community can result in novel, customised BCP solutions; existing systems and data structures can be used to enhance an existing BCP. Even the best plans are often challenged by events; understanding that flexibility is essential to effective incident response is a critical element in the development of a proper business continuity plan.

  1. 智能楼宇节能技术探讨%Discussion of Energy Saving Technology for IntelligentBuilding

    Institute of Scientific and Technical Information of China (English)

    王斌鑫

    2014-01-01

    According to the theory of the intelligent architecture energy consumption, the energy consumption of theintelligent building was analyzed. On this basis, from the aspects of energy saving control and energy saving management, the energy saving technologies of the systems including heating,air conditioning, lighting,elevator,energy management and etc were discussed. And then, the development direction of the intelligent building energy saving was analyzed.%基于智能建筑用能理论,对智能楼宇用能进行了分析,在此基础上,从控制节能和管理节能两个方面,对智能楼宇的暖通、空调、照明、电梯、能源管理等系统的节能技术进行了探讨,并对未来智能楼宇节能的发展方向进行了展望。

  2. Discussion on the green energy saving technology application in building construction%谈建筑施工中绿色节能技术的应用

    Institute of Scientific and Technical Information of China (English)

    肖宁

    2015-01-01

    This paper elaborated the role application of green energy saving technology in building construction,according to the principle of green energy saving technology in building construction,researched the internal green construction technology measures of building top,interior walls,exterior walls,laid foundation for the sustainable development of construction industry.%阐述了建筑施工中应用绿色节能技术的作用,根据绿色节能技术在建筑施工中的原则,对建筑顶部、内墙、外墙、内部的绿色施工技术措施作了研究,为建筑业的可持续发展奠定了基础。

  3. A Survey of Communications and Networking Technologies for Energy Management in Buildings and Home Automation

    Directory of Open Access Journals (Sweden)

    Aravind Kailas

    2012-01-01

    Full Text Available With the exploding power consumption in private households and increasing environmental and regulatory restraints, the need to improve the overall efficiency of electrical networks has never been greater. That being said, the most efficient way to minimize the power consumption is by voluntary mitigation of home electric energy consumption, based on energy-awareness and automatic or manual reduction of standby power of idling home appliances. Deploying bi-directional smart meters and home energy management (HEM agents that provision real-time usage monitoring and remote control, will enable HEM in “smart households.” Furthermore, the traditionally inelastic demand curve has began to change, and these emerging HEM technologies enable consumers (industrial to residential to respond to the energy market behavior to reduce their consumption at peak prices, to supply reserves on a as-needed basis, and to reduce demand on the electric grid. Because the development of smart grid-related activities has resulted in an increased interest in demand response (DR and demand side management (DSM programs, this paper presents some popular DR and DSM initiatives that include planning, implementation and evaluation techniques for reducing energy consumption and peak electricity demand. The paper then focuses on reviewing and distinguishing the various state-of-the-art HEM control and networking technologies, and outlines directions for promoting the shift towards a society with low energy demand and low greenhouse gas emissions. The paper also surveys the existing software and hardware tools, platforms, and test beds for evaluating the performance of the information and communications technologies that are at the core of future smart grids. It is envisioned that this paper will inspire future research and design efforts in developing standardized and user-friendly smart energy monitoring systems that are suitable for wide scale deployment in homes.

  4. Demystifying the indigenous language ‘inadequacies’ towards capacity building in science and technology in Zimbabwe

    Directory of Open Access Journals (Sweden)

    Gilbert Tarugarira

    2012-12-01

    Full Text Available Africa seems to be underplaying, underestimating and despising the role of indigenous languages as an emancipatory tool from the socio-economic and political bondage born of colonialism. Language, this paper argues, is the means of identifying entities, categorising objects and concepts, perceiving ideas and things, grasping the abstract, the concrete as well as the supernatural, and thinking about anything in whatever form. This paper demystifies and challenges the hegemonic position accorded to the colonial master’s language as the only viable instrument for mediating the exploitation of science and technology.

  5. Dr. Natarajan Ishwaran: Use Remote Sensing Technologies to Build Landscape Scenarios for Conservation-Development Interactions

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Dr. Natarajan Ishwaran has been working as Director of the Division of Ecological and Earth Sciences of UNESCO and Secretary of the Man and Biosphere Program for many years. In September 2012, after his retirement, he will arrive at the Center for Earth Observation and Digital Earth(CEODE) of the Chinese Academy of Sciences in Beijing, and embark on a new career as a special- retained foreign expert at the International Center on Space Technologies for Natural and Cultural Heritage (HIST) hosted by CEODE.

  6. Alabama's Education Coalition Focuses on Supporting the State's Math, Science and Technology Initiative and on Building Distance Learning Programs

    Science.gov (United States)

    Denson, R. L.

    2003-12-01

    The Alabama Math Science Technology Educational Coalition (AMSTEC) was formed as a non-profit after a 1998 NASA Linking Leaders program brought in education and corporate leaders to address systemic education reform in Alabama public schools. AMSTEC was instrumental in the creation of the Alabama Math Science Technology Initiative (AMSTI), a K-12 program designed using data from national and international research and local teacher survey. In the face of dwindling government support in a state ranked last in education funding, AMSTEC believes that its best hope for improved STEM education lies in strengthening its community/industry partnerships and building upon the Department of Education's newly created AMSTI program. NASA's GLOBE program is the primary earth science education component being integrated into AMSTI. AMSTI is structured to provide teachers with (1) the materials, equipment, technology and supplies necessary to deliver high quality, inquiry-based instruction; (2) professional development linked directly to the educational resources with the intent of strengthening content knowledge, instructional strategies, and use of assessment tools; and (3) on-site support and mentoring throughout the year in the interest of achieving these goals. Roles for community partners to support these objectives far exceed that of mere funding - especially in the area of mentoring and professional development. Currently, AMSTEC consists of 100+ members including classroom teachers and district officers, education department representatives from higher educational institutions, policy makers and administrators, and government and industry representatives. AMSTEC remains partially tied to NASA fiscally and is administratively housed by the National Space Science and Technology Center's Earth System Science Center. AMSTEC's partnership emphasis is focused on increasing corporate and industry participation to support the implementation of AMSTI and its hub

  7. Building Information Modelling (BIM) and Unmanned Aerial Vehicle (UAV) technologies in infrastructure construction project management and delay and disruption analysis

    Science.gov (United States)

    Vacanas, Yiannis; Themistocleous, Kyriacos; Agapiou, Athos; Hadjimitsis, Diofantos

    2015-06-01

    Time in infrastructure construction projects has always been a fundamental issue as early as from the inception of a project, during the construction process and often after the completion and delivery. In a typical construction contract time related matters such as the completion date and possible delays are among the most important issues that are dealt with by the contract provisions. In the event of delay there are usually provisions for extension of time award to the contractor with possible reimbursement for the extra cost and expenses caused by this extension of time to the contract duration. In the case the contractor is not entitled to extension of time, the owner will be possibly entitled to amounts as compensation for the time prohibited from using his development. Even in the event of completion within the time agreed, under certain circumstances a contractor may have claims for reimbursement for extra costs incurred due to induced acceleration measures he had to take in order to mitigate disruption effects caused to the progress of the works by the owner or his representatives. Depending on the size of the project and the agreement amount, these reimbursement sums may be extremely high. Therefore innovative methods with the exploitation of new technologies for effective project management for the avoidance of delays, delay analysis and mitigation measures are essential; moreover, methods for collecting efficiently information during the construction process so that disputes regarding time are avoided or resolved in a quick and fair manner are required. This paper explores the state of art for existing use of Building Information Modelling (BIM) and Unmanned Aerial Vehicles (UAV) technologies in the construction industry in general. Moreover the paper considers the prospect of using BIM technology in conjunction with the use of UAV technology for efficient and accurate as-built data collection and illustration of the works progress during an

  8. EXPERIENCE IN APPLICATION OF THE TECHNOLOGIES OF BUILDING INFORMATION MODELING WHEN CONSTRUCTING THE OLYMPIC OBJECTS OF SOCHI-2014 AND STADIUMS OF THE FIFA WORLD CUP 2018

    Directory of Open Access Journals (Sweden)

    Shakhraman'yan Andrey Mikhaylovich

    2016-06-01

    Full Text Available The authors describe the experience in application of information modeling technologies for buildings and structures on the example of design and construction of the objects SOCHI-2014 and stadiums of FIFA World Cup 2017. According to the regulatory documents in 2014 in Sochi the automated monitoring systems of the strain state of bearing structures and engineering systems were in-stalled in all the Olympic ice stadiums and in the Central Olympic Stadium. The systems were controlled by software package SODIS Building. The main possibilities of SODIS Building are enumerated in the article.

  9. Plasma technology for creation of protective and decorative coatings for building materials

    Science.gov (United States)

    Volokitin, Oleg; Volokitin, Gennady; Skripnikova, Nelli; Shekhovtsov, Valentin

    2016-01-01

    An experimental setup is developed to create a protective and decorative coating on the surface of building materials. Experimental study is conducted to create a protective coating using low-temperature plasma. The properties of the surface before and after the plasma treatment are investigated. At the increase of the plasma generator power (56-75 kW) the rate of the vitreous coating formation is significantly reduced, and the destruction of hydrous calcium silicates occurs at a lower depth (0.5-2.0 mm). In this case, the adhesive strength increases up to 2.34 MPa. At the increase of the exposure time at 56 kW (0.045 m/s melting rate) plasma generation power, the melt formation is observed not only at the surface but at depth of 0.7 mm and deeper. Also, a deep degradation of the material occurs and the adhesive strength decreases. The optimal heat flux density of plasma generator was established at 1.8-2.6 . 106 W/m2, which allows the achievement of the uniform layer formation on the wood surface that preserves its natural pattern visible.

  10. Building a Smooth Medical Service for Operating Room Using RFID Technologies

    Directory of Open Access Journals (Sweden)

    Lun-Ping Hung

    2014-01-01

    Full Text Available Due to the information technology advancement, the feasibility for the establishment of mobile medical environments has been strengthened. Using RFID to facilitate the tracing of patients’ mobile position in hospital has attracted more attentions from researchers due to the demand on advanced features. Traditionally, the management of surgical treatment is generally manually operated and there is no consistent operating procedure for patients transferring among wards, surgery waiting rooms, operating rooms, and recovery rooms, resulting in panicky and urgent transferring work among departments and, thus, leading to delays and errors. In this paper, we propose a new framework using radio frequency identification (RFID technology for a mobilized surgical process monitoring system. Through the active tag, an application management system used before, during, and after the surgical processes has been proposed. The concept of signal level matrix, SLM, was proposed to accurately identify patients and dynamically track patients’ location. By updating patient’s information real-time, the preprocessing time needed for various tasks and incomplete transfers among departments can be reduced, the medical resources can be effectively used, unnecessary medical disputes can be reduced, and more comprehensive health care environment can be provided. The feasibility and effectiveness of our proposed system are demonstrated with a number of experimental results.

  11. Building biophysics in mid-century China: the University of Science and Technology of China.

    Science.gov (United States)

    Luk, Yi Lai Christine

    2015-01-01

    Biophysics has been either an independent discipline or an element of another discipline in the United States, but it has always been recognized as a stand-alone discipline in the People's Republic of China (PRC) since 1949. To inquire into this apparent divergence, this paper investigates the formational history of biophysics in China by examining the early institutional history of one of the best-known and prestigious science and technology universities in the PRC, the University of Science and Technology of China (USTC). By showing how the university and its biophysics program co-evolved with national priorities from the school's founding in 1958 to the eve of the Cultural Revolution in 1966, the purpose of this paper is to assess the development of a scientific discipline in the context of national demands and institutional politics. Specific materials for analysis include the school's admission policies, curricula, students' dissertations, and research program. To further contextualize the institutional setting of Chinese biophysics, this paper begins with a general history of proto-biophysical institutions in China during the Nationalist-Communist transitional years. This paper could be of interest to historians wanting to know more about the origin of the biophysics profession in China, and in particular how research areas that constitute biophysics changed in tandem with socio-political contingencies.

  12. Ethics in Rehabilitation Counselor Supervision.

    Science.gov (United States)

    Blackwell, Terry L.; Strohmer, Douglas C.; Belcas, Eva M.; Burton, Kathryn A.

    2002-01-01

    Article is an exploration of some of the ethical issues facing rehabilitation counselors who provide clinical supervision. Ethical issues related to competence, evaluation and due process, dual relationships, confidentiality, and informed consent are discussed. (Contains 28references, 2 tables, and 1 appendix.) (Author)

  13. Climate technology initiative capacity building seminar: best practice in climate technology and energy efficiency in central and eastern Europe. Seminar Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Pichl, P. [ed.

    2000-08-01

    The Capacity Building Seminar on 'Best Practice in Climate Technology and Energy Efficiency in Central and Eastern Europe', held 6-10 December 1999 in Marienthal/Ostritz in Germany, was a very successful event in the framework of the CLIMATE TECHNOLOGY INITIATIVE (CTI). One reason for that is that the seminar allowed delegates from 22 nations, from Kazakhstan to Estonia, come together for an exchange of opinions about 'Energy Efficiency and Climate Protection' and all related issues. A reason is that this seminar provided an excellent starting point for future networking in Central and Eastern Europe and Asia. The colleagues who got to know each other at the seminar will meet again in future workshops and seminars. They can now contact a colleague from abroad to get information about special questions of Energy Efficiency when they need it. A third reason - and the most important one for the entire co-operation within the CTI organisation - is the special character of the seminar as a starting point for multitude of activities on Energy Efficiency and Climate Protection. At the end of the Ostritz seminar eleven delegations stated that they would organise follow up workshops in their own countries to go deeper into the details and to co-operate on a higher level. It may be that these workshops will be followed by others in other European regions. (orig./GL)

  14. Distributed data collection and supervision based on web sensor

    Science.gov (United States)

    He, Pengju; Dai, Guanzhong; Fu, Lei; Li, Xiangjun

    2006-11-01

    As a node in Internet/Intranet, web sensor has been promoted in recent years and wildly applied in remote manufactory, workshop measurement and control field. However, the conventional scheme can only support HTTP protocol, and the remote users supervise and control the collected data published by web in the standard browser because of the limited resource of the microprocessor in the sensor; moreover, only one node of data acquirement can be supervised and controlled in one instant therefore the requirement of centralized remote supervision, control and data process can not be satisfied in some fields. In this paper, the centralized remote supervision, control and data process by the web sensor are proposed and implemented by the principle of device driver program. The useless information of the every collected web page embedded in the sensor is filtered and the useful data is transmitted to the real-time database in the workstation, and different filter algorithms are designed for different sensors possessing independent web pages. Every sensor node has its own filter program of web, called "web data collection driver program", the collecting details are shielded, and the supervision, control and configuration software can be implemented by the call of web data collection driver program just like the use of the I/O driver program. The proposed technology can be applied in the data acquirement where relative low real-time is required.

  15. Supervised training and physical education in elementary school: contributions to the professional formation

    Directory of Open Access Journals (Sweden)

    Adrielle Lopes Souza

    2014-06-01

    Full Text Available The present study aims to reflect on the importance of supervised internship in Physical Education in the context of elementary education; establishing, therefore, a path of definitions of concepts ranging from the disquieting comprehension regarding the association between theory and practice to the most intricate details of the content to be treated in Physical Education classes, as well as the formative process of the learners who perform the supervised training. Thus, it was possible to build a vigorous dialogue with the different theorists and scholars of both Education and Physical Education. Since then, various thematic issues that punctuate the supervised internship in all its dimensions have aroused.

  16. Building a health care workforce for the future: more physicians, professional reforms, and technological advances.

    Science.gov (United States)

    Grover, Atul; Niecko-Najjum, Lidia M

    2013-11-01

    Traditionally, projections of US health care demand have been based upon a combination of existing trends in usage and idealized or expected delivery system changes. For example, 1990s health care demand projections were based upon an expectation that delivery models would move toward closed, tightly managed care networks and would greatly decrease the demand for subspecialty care. Today, however, a different equation is needed on which to base such projections. Realistic workforce planning must take into account the fact that expanded access to health care, a growing and aging population, increased comorbidity, and longer life expectancy will all increase the use of health care services per capita over the next few decades--at a time when the number of physicians per capita will begin to drop. New technologies and more aggressive screening may also change the equation. Strategies to address these increasing demands on the health system must include expanded physician training.

  17. Towards Building a Computer Aided Education System for Special Students Using Wearable Sensor Technologies

    Directory of Open Access Journals (Sweden)

    Raja Majid Mehmood

    2017-02-01

    Full Text Available Human computer interaction is a growing field in terms of helping people in their daily life to improve their living. Especially, people with some disability may need an interface which is more appropriate and compatible with their needs. Our research is focused on similar kinds of problems, such as students with some mental disorder or mood disruption problems. To improve their learning process, an intelligent emotion recognition system is essential which has an ability to recognize the current emotional state of the brain. Nowadays, in special schools, instructors are commonly use some conventional methods for managing special students for educational purposes. In this paper, we proposed a novel computer aided method for instructors at special schools where they can teach special students with the support of our system using wearable technologies.

  18. A Study of Incentive Policies for Building-Integrated Photovoltaic Technology in Hong Kong

    Directory of Open Access Journals (Sweden)

    Aotian Song

    2016-08-01

    Full Text Available Installing sustainable and renewable energy systems is a promising way of relieving Hong Kong’s dependence on imported fossil fuels. Solar photovoltaic (PV technology is a perfect solution for Hong Kong as it fits the economic and geographic situation. Through a review of the PV development history of five leading PV countries, Germany, Japan, Italy, Mainland China, and the USA, this paper serves as a useful policy toolbox to aid PV development. Based on the forerunners’ successful PV industry experiences and Hong Kong’s unique local situations, a series of incentive strategies were proposed for Hong Kong to help promote the utilization of solar PV systems by reducing the initial investment and providing reasonable subsidies at the initial stages and during the operation period of the PV systems. These results could be a practical reference for promoting renewable energy applications for local policy-makers.

  19. Towards Building a Computer Aided Education System for Special Students Using Wearable Sensor Technologies.

    Science.gov (United States)

    Mehmood, Raja Majid; Lee, Hyo Jong

    2017-02-08

    Human computer interaction is a growing field in terms of helping people in their daily life to improve their living. Especially, people with some disability may need an interface which is more appropriate and compatible with their needs. Our research is focused on similar kinds of problems, such as students with some mental disorder or mood disruption problems. To improve their learning process, an intelligent emotion recognition system is essential which has an ability to recognize the current emotional state of the brain. Nowadays, in special schools, instructors are commonly use some conventional methods for managing special students for educational purposes. In this paper, we proposed a novel computer aided method for instructors at special schools where they can teach special students with the support of our system using wearable technologies.

  20. Application of GPS technology to build a mine-subsidence observation station

    Institute of Scientific and Technical Information of China (English)

    L(U) Wei-cai; CHENG Shi-guang; YANG Hai-sheng; LIU Da-peng

    2008-01-01

    We propose the design of an observation station to establish a reliable datum for displacement and deformation analysis at the first working-face subsidence observation station of Liuzhuang Mine. The design considers various geologic and mining con-ditions. Having analyzed the aims of the joint survey and the comprehensive survey, we propose design principles, and work modes,for adopting GPS technology as the position measuring technique to be used in these two stages. Baseline vectors and spatial ad-justments of the GPS network were calculated after study of data processing and quality estimation methods. A coordinate system transformation and error estimates of the transformed GPS network data are discussed. The error estimates in all stages show that the GPS control network of the observation station has sufficient accuracy and is highly efficient. The network thus provides a reli-able datum for analyzing the laws of surface displacement and deformation induced by mining.

  1. Earth System Grid Center for Enabling Technologies: Building a Global Infrastructure for Climate Change Research

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Dean N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Ahrens, J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Ananthakrishnan, R. [Argonne National Lab. (ANL), Argonne, IL (United States); Bell, G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Bharathi, S. [Univ. of Southern California, Marina del Ray, CA (United States). Information Science Institute; Brown, D. [National Center for Atmospheric Reserch, Boulder, CO (United States); Chen, M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Chervenak, A. L. [Univ. of Southern California, Marina del Ray, CA (United States). Information Science Institute; Cinquini, L. [National Aeronautics and Space Administration, Pasadena, CA (United States); Drach, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Foster, I. T. [Argonne National Lab. (ANL), Argonne, IL (United States); Fox, P. [Rensselaer Polytechnic Inst., Troy, NY (United States); Hankin, S. [National Oceanic and Atmospheric Administration (PMEL), Seattle, WA (United States); Harper, D. [National Center for Atmospheric Reserch, Boulder, CO (United States); Hook, N. [National Center for Atmospheric Reserch, Boulder, CO (United States); Jones, P. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Middleton, D. E. [National Center for Atmospheric Reserch, Boulder, CO (United States); Miller, R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Nienhouse, E. [National Center for Atmospheric Reserch, Boulder, CO (United States); Schweitzer, R. [National Oceanic and Atmospheric Administration (PMEL), Seattle, WA (United States); Schuler, R. [Univ. of Southern California, Marina del Ray, CA (United States). Information Science Institute; Shipman, G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Shoshani, A. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Siebenlist, F. [Argonne National Lab. (ANL), Argonne, IL (United States); Sim, A. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Strand, W. G. [National Center for Atmospheric Reserch, Boulder, CO (United States); Wang, F. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Wilcox, H. [National Center for Atmospheric Reserch, Boulder, CO (United States); Wilhelmi, N. [National Center for Atmospheric Reserch, Boulder, CO (United States)

    2010-08-16

    Established within DOE’s Scientific Discovery through Advanced Computing (SciDAC-) 2 program, with support from ASCR and BER, the Earth System Grid Center for Enabling Technologies (ESG-CET) is a consortium of seven laboratories (Argonne National Laboratory [ANL], Los Alamos National Laboratory [LANL], Lawrence Berkeley National Laboratory [LBNL], Lawrence Livermore National Laboratory [LLNL], National Center for Atmospheric Research [NCAR], Oak Ridge National Laboratory [ORNL], and Pacific Marine Environmental Laboratory [PMEL]), and two institutes (Rensselaer Polytechnic Institute [RPI] and the University of Southern California, Information Sciences Institute [USC/ISI]). The consortium’s mission is to provide climate researchers worldwide with a science gateway to access data, information, models, analysis tools, and computational capabilities required to evaluate extreme-scale data sets. Its stated goals are to (1) make data more useful to climate researchers by developing collaborative technology that enhances data usability; (2) meet the specific needs that national and international climate projects have for distributed databases, data access, and data movement; (3) provide a universal and secure web-based data access portal for broad-based multi-model data collections; and (4) provide a wide range of climate data-analysis tools and diagnostic methods to international climate centers and U.S. government agencies. To this end, the ESG-CET is working to integrate all highly publicized climate data sets—from climate simulations to observations—using distributed storage management, remote high-performance units, high-bandwidth wide-area networks, and user desktop platforms in a collaborative problem-solving environment.

  2. Postgraduate students experience in research supervision

    Science.gov (United States)

    Mohamed, Hazura; Judi, Hairulliza Mohamad; Mohammad, Rofizah

    2017-04-01

    The success and quality of postgraduate education depends largely on the effective and efficient supervision of postgraduate students. The role of the supervisor becomes more challenging with supervisory expectations rising high quality graduates. The main objective of this study was to examine the experiences of postgraduate students towards supervisory services for the duration of their studies. It also examines whether supervisory experience varies based on demographic variables such as level of study and nationality. This study uses a quantitative approach in the form of survey. Questionnaires were distributed to 96 postgraduate students of the Faculty of Information Science and Technology, Universiti Kebangsaan Malaysia. Data collected were analyzed using Statistical Package for the Social Science (SPSS 23.0) to get the frequency, mean and standard deviation. T-test was used to find the difference between demographic variables and supervisory experience. The findings overall showed that postgraduate students gave positive response to the supervisory services. However, there were differences supervisory experiences based on the level of study and nationality. The results of this study hope the parties involved could provide a better support to improve the quality of supervision.

  3. Integrating open-source technologies to build low-cost information systems for improved access to public health data

    Directory of Open Access Journals (Sweden)

    Oberle Mark W

    2008-06-01

    Full Text Available Abstract Effective public health practice relies on the availability of public health data sources and assessment tools to convey information to investigators, practitioners, policy makers, and the general public. Emerging communication technologies on the Internet can deliver all components of the "who, what, when, and where" quartet more quickly than ever with a potentially higher level of quality and assurance, using new analysis and visualization tools. Open-source software provides the opportunity to build low-cost information systems allowing health departments with modest resources access to modern data analysis and visualization tools. In this paper, we integrate open-source technologies and public health data to create a web information system which is accessible to a wide audience through the Internet. Our web application, "EpiVue," was tested using two public health datasets from the Washington State Cancer Registry and Washington State Center for Health Statistics. A third dataset shows the extensibility and scalability of EpiVue in displaying gender-based longevity statistics over a twenty-year interval for 3,143 United States counties. In addition to providing an integrated visualization framework, EpiVue's highly interactive web environment empowers users by allowing them to upload their own geospatial public health data in either comma-separated text files or MS Excel™ spreadsheet files and visualize the geospatial datasets with Google Maps™.

  4. GEOSS Architecture Implementation Pilot-II: Integrating Technologies and Expertise to Build GEOSS

    Science.gov (United States)

    Robinson, E. M.; Husar, R. B.; Falke, S. R.; McCabe, D. C.; Menard, L.; Wald, L.; Warnock, A.

    2009-12-01

    There are numerous, distributed Earth observations that are in principle available and useful for societal benefit applications such as analysis of air quality events or renewable energy. Currently, Earth observation providers face challenges efficiently disseminating data to users in needed formats. Data users also face hurdles in finding, accessing, and using the right Earth observations for their needs. GEOSS is designed to reduce the burden on both the provider and the user, by providing easier data discovery and access to distributed resources through standard protocols and open architecture. The GEOSS Architecture Implementation Pilot-II (AIP-II) was organized with workgroups for societal benefit areas (SBAs) and transverse technologies (TTs). The SBA workgroups used their domain expertise to test end-to-end flow of data and metadata from data providers to data users with specific application needs. GEOSS mandates that metadata and data are registered using standard protocols such as WMS and WCS for data access and ISO 19115 and 19119 for metadata. These standards allowed the data being registered in community catalogs to be findable in the GEOSS Clearinghouse and automatically accessible through WMS viewers and other tools. The TT workgroups tied the diverse SBAs together by helping the SBAs implement standards for data access and metadata and develop common tools and methods that could be used by the SBAs. The TT workgroups laid out a set of use cases which provide a framework for different groups to add components that aided the end-to-end flow of data to the user. Collaboratively, the workgroups implemented the use cases and developed and refined the processes of deploying, documenting, and registering data through the GEOSS Common Infrastructure (GCI) for use in societal benefit area applications. The SBA and TT workgroups were connected through weekly discussions, and the work was captured using an online collaborative workspace. This allowed SBA

  5. 20 CFR 655.30 - Supervised recruitment.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Supervised recruitment. 655.30 Section 655.30... Workers) § 655.30 Supervised recruitment. (a) Supervised recruitment. Where an employer is found to have... failed to adequately conduct recruitment activities or failed in any obligation of this part, the CO may...

  6. 40 CFR 35.935-8 - Supervision.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Supervision. 35.935-8 Section 35.935-8... ASSISTANCE Grants for Construction of Treatment Works-Clean Water Act § 35.935-8 Supervision. In the case of... supervision and inspection of the project to ensure that the construction conforms with the approved plans...

  7. Supervision Experiences of New Professional School Counselors

    Science.gov (United States)

    Bultsma, Shawn A.

    2012-01-01

    This qualitative study examined the supervision experiences of 11 new professional school counselors. They reported that their supervision experiences were most often administrative in nature; reports of clinical and developmental supervision were limited to participants whose supervisors were licensed as professional counselors. In addition,…

  8. 10 CFR 35.27 - Supervision.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Supervision. 35.27 Section 35.27 Energy NUCLEAR REGULATORY COMMISSION MEDICAL USE OF BYPRODUCT MATERIAL General Administrative Requirements § 35.27 Supervision. (a) A... under the supervision of an authorized user, as allowed by § 35.11(b)(1), shall— (1) In addition to...

  9. 28 CFR 2.91 - Supervision responsibility.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Supervision responsibility. 2.91 Section 2.91 Judicial Administration DEPARTMENT OF JUSTICE PAROLE, RELEASE, SUPERVISION AND RECOMMITMENT OF....91 Supervision responsibility. (a) Pursuant to D.C. Code 24-133(c), the District of Columbia...

  10. 75 FR 59799 - Office of Thrift Supervision

    Science.gov (United States)

    2010-09-28

    ... Office of Thrift Supervision Purchase of Branch Office(s) and/or Transfer of Assets/Liabilities AGENCY: Office of Thrift Supervision (OTS), Treasury. ACTION: Notice and request for comment. SUMMARY: The... Supervision within the Department of the Treasury will submit the proposed information collection...

  11. 7 CFR 70.12 - Supervision.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Supervision. 70.12 Section 70.12 Agriculture... PRODUCTS AND RABBIT PRODUCTS Grading of Poultry Products and Rabbit Products General § 70.12 Supervision. All grading service shall be subject to supervision at all times by the responsible State...

  12. 7 CFR 550.33 - Administrative supervision.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 6 2010-01-01 2010-01-01 false Administrative supervision. 550.33 Section 550.33... Agreements Program Management § 550.33 Administrative supervision. REE employees are prohibited from engaging... management issues. The cooperator is solely responsible for the administrative supervision of its employees....

  13. 27 CFR 46.79 - Supervision.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Supervision. 46.79 Section... § 46.79 Supervision. Before payment is made under this subpart in respect of the tax, or tax and duty... under the supervision of an appropriate TTB officer who will be assigned for that purpose by...

  14. 24 CFR 200.105 - Mortgagor supervision.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Mortgagor supervision. 200.105... supervision. (a) As long as the Commissioner is the insurer or holder of the mortgage, the Commissioner shall... Regulatory Agreement or other instrument granting the Commissioner supervision of the mortgagor....

  15. The Learning Alliance: Ethics in Doctoral Supervision

    Science.gov (United States)

    Halse, Christine; Bansel, Peter

    2012-01-01

    This paper is concerned with the ethics of relationships in doctoral supervision. We give an overview of four paradigms of doctoral supervision that have endured over the past 25 years and elucidate some of their strengths and limitations, contextualise them historically and consider their implications for doctoral supervision in the contemporary…

  16. 48 CFR 836.572 - Government supervision.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Government supervision. 836.572 Section 836.572 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS SPECIAL... supervision. The contracting officer shall insert the clause at 852.236-78, Government supervision,...

  17. 7 CFR 56.6 - Supervision.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Supervision. 56.6 Section 56.6 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections... Grading of Shell Eggs General § 56.6 Supervision. All grading service shall be subject to supervision...

  18. 32 CFR 631.3 - Supervision.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 4 2010-07-01 2010-07-01 true Supervision. 631.3 Section 631.3 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) LAW ENFORCEMENT AND CRIMINAL....3 Supervision. The following will develop and have staff supervision over AFDCB and...

  19. 9 CFR 354.13 - Supervision.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Supervision. 354.13 Section 354.13... CERTIFICATION VOLUNTARY INSPECTION OF RABBITS AND EDIBLE PRODUCTS THEREOF Basis of Service § 354.13 Supervision. All inspection service shall be subject to supervision at all times by the station supervisor,...

  20. Skærpet bevidsthed om supervision

    DEFF Research Database (Denmark)

    Pedersen, Inge Nygaard

    2002-01-01

    This article presents a historical survey of the initiatives which have taken place in european music therapy towards developing a deeper consciousness about supervision. Supervision as a disciplin in music therapy training, as a maintenance of music therapy profession and as a postgraduate...... training for examined music therapists. Definitions are presented and methods developed by working groups in european music therapy supervision are presented....

  1. Multicultural Supervision: What Difference Does Difference Make?

    Science.gov (United States)

    Eklund, Katie; Aros-O'Malley, Megan; Murrieta, Imelda

    2014-01-01

    Multicultural sensitivity and competency represent critical components to contemporary practice and supervision in school psychology. Internship and supervision experiences are a capstone experience for many new school psychologists; however, few receive formal training and supervision in multicultural competencies. As an increased number of…

  2. Building technology platform aimed to develop service robot with embedded personality and enhanced communication with social environment

    Directory of Open Access Journals (Sweden)

    Aleksandar Rodić

    2015-04-01

    Full Text Available The paper is addressed to prototyping of technology platform aimed to develop of ambient-aware human-centric indoor service robot with attributes of emotional intelligence to enhance interaction with social environment. The robot consists of a wheel-based mobile platform with spinal (segmented torso, bi-manual manipulation system with multi-finger robot hands and robot head. Robot prototype was designed to see, hear, speak and use its multimodal interface for enhanced communication with humans. Robot is capable of demonstrating its affective and social behavior by using audio and video interface as well as body gestures. Robot is equipped with advanced perceptive system based on heterogeneous sensorial system, including laser range finder, ultrasonic distance sensors and proximity detectors, 3-axis inertial sensor (accelerometer and gyroscope, stereo vision system, 2 wide-range microphones, and 2 loudspeakers. The device is foreseen to operate autonomously but it may be also operated remotely from a host computer through wireless communication link as well as by use of a smart-phone based on advanced client-server architecture. Robot prototype has embedded attributes of artificial intelligence and utilizes advanced cognitive capabilities such as spatial reasoning, obstacle and collision avoidance, simultaneous localization and mapping, etc. Robot is designed in a manner to enable uploading of new or changing existing algorithms of emotional intelligence that should provide to robot human-like affective and social behavior. The key objective of the project presented in the paper regards to building advanced technology platform for research and development of personal robots aimed to use for different purpose, e.g. robot-entertainer, battler, robot for medical care, security robot, etc. In a word, the designed technology platform is expected to help in development human-centered service robots to be used at home, in the office, public institutions

  3. Building political and financial support for science and technology for agriculture

    Science.gov (United States)

    Beachy, Roger N.

    2014-01-01

    The high rate of return on investments in research and development in agriculture, estimated at between 20- and 40-fold, provides a strong rationale for increasing financial support for such research. Furthermore, the urgency to provide sufficient nutrition for a growing population amid growing demands for an expanding bioeconomy, while facing population growth and changing global weather patterns heightens the urgency to expand research and development in this field. Unfortunately, support by governments for research has increased at a fraction of the rate of increases in support of research for health, energy, etc. Although there have been significant increases in investments by the private sector over the past two decades, much of the foundational research that supports private-sector activities is generated in the public sector. To achieve the greatest benefits of breakthroughs in research, it may be necessary to reconfigure research funding and technology transfer mechanisms in order to more rapidly apply discoveries to local needs as well as to global challenges. Some changes will likely require significant organizational, administrative and operational changes in education and research institutions. PMID:24535386

  4. Building political and financial support for science and technology for agriculture.

    Science.gov (United States)

    Beachy, Roger N

    2014-04-05

    The high rate of return on investments in research and development in agriculture, estimated at between 20- and 40-fold, provides a strong rationale for increasing financial support for such research. Furthermore, the urgency to provide sufficient nutrition for a growing population amid growing demands for an expanding bioeconomy, while facing population growth and changing global weather patterns heightens the urgency to expand research and development in this field. Unfortunately, support by governments for research has increased at a fraction of the rate of increases in support of research for health, energy, etc. Although there have been significant increases in investments by the private sector over the past two decades, much of the foundational research that supports private-sector activities is generated in the public sector. To achieve the greatest benefits of breakthroughs in research, it may be necessary to reconfigure research funding and technology transfer mechanisms in order to more rapidly apply discoveries to local needs as well as to global challenges. Some changes will likely require significant organizational, administrative and operational changes in education and research institutions.

  5. Supervision Experiences of Professional Counselors Providing Crisis Counseling

    Science.gov (United States)

    Dupre, Madeleine; Echterling, Lennis G.; Meixner, Cara; Anderson, Robin; Kielty, Michele

    2014-01-01

    In this phenomenological study, the authors explored supervision experiences of 13 licensed professional counselors in situations requiring crisis counseling. Five themes concerning crisis and supervision were identified from individual interviews. Findings support intensive, immediate crisis supervision and postlicensure clinical supervision.

  6. Building technology and information competences among university students through an academic contest and social networking

    Directory of Open Access Journals (Sweden)

    Maria-Eugenia Ruiz-Molina

    2013-08-01

    effectively make students aware of the existence of the informational video about technology and information competences and to watch it with full attention.

  7. Building Irish families through surrogacy: medical and judicial issues for the advanced reproductive technologies.

    LENUS (Irish Health Repository)

    Sills, Eric Scott

    2008-01-01

    Surrogacy involves one woman (surrogate mother) carrying a child for another person\\/s (commissioning person\\/couple), based on a mutual agreement requiring the child to be handed over to the commissioning person\\/couple following birth. Reasons for seeking surrogacy include situations where a woman has non-functional or absent reproductive organs, or as a remedy for recurrent pregnancy loss. Additionally, surrogacy may find application in any medical context where pregnancy is contraindicated, or where a couple consisting of two males seek to become parents through oocyte donation. Gestational surrogacy is one of the main issues at the forefront of bioethics and the advanced reproductive technologies, representing an important challenge to medical law. This analysis reviews the history of surrogacy and clinical and legal issues pertaining to this branch of reproductive medicine. Interestingly, the Medical Council of Ireland does not acknowledge surrogacy in its current practice guidelines, nor is there specific legislation addressing surrogacy in Ireland at present. We therefore have developed a contract-based model for surrogacy in which, courts in Ireland may consider when confronted with a surrogacy dispute, and formulated a system to resolve any potential dispute arising from a surrogacy arrangement. While the 2005 report by the Commission on Assisted Human Reproduction (CAHR) is an expert opinion guiding the Oireachtas\\' development of specific legislation governing assisted human reproduction and surrogacy, our report represents independent scholarship on the contractual elements of surrogacy with particular focus on how Irish courts might decide on surrogacy matters in a modern day Ireland. This joint medico-legal collaborative also reviews the contract for services arrangement between the commissioning person\\/s and the surrogate, and the extent to which the contract may be enforced.

  8. 海量数据快速可视化技术在节能减排监管系统中的应用%Application of Big Data Rapid Visualization Technology in Energy-saving and Emission Reduction Supervision System of Power Industry

    Institute of Scientific and Technical Information of China (English)

    陆建伟; 周升; 张珂珩; 王飞

    2014-01-01

    随着电力行业节能减排工作的推进,节能减排监管数据爆炸式增长。为保证节能减排监管系统的正常运行,需要对海量数据进行可视化监控,以定位问题的根源。基于海量数据的快速可视化技术,能实现对海量数据的综合分析,实现节能减排、能源合理利用的创新。通过总结电力行业节能减排监管系统中的海量数据的特点,介绍海量数据的快速可视化技术,重点讨论了如何利用实时数据库的通知服务和本地缓存,来实现海量数据快速可视化技术在节能减排监管系统中的应用。%With the advancement of energy saving and emission reduction in power industry, regulatory data of energy saving and emission reduction sees explosive growth. In order to ensure normal operation of energy saving and emission reduction supervision system, big data should be supervised visually to locate source of problems. The big data-based rapid visualization technology can realize comprehensive analysis on big data and innovations of energy conservation and emissions reduction as well as rational utilization of energy. By summarizing characteristics of big data in energy saving and emission reduction supervision system of power industry, this paper introduces big data rapid visualization technology and mainly discusses how to use the notification service and local caching of real-time database to realize the application of big data rapid visual-ization technology in energy saving and emission reduction supervision system.

  9. Building a Snow Data System on the Apache OODT Open Technology Stack

    Science.gov (United States)

    Goodale, C. E.; Painter, T. H.; Mattmann, C. A.; Hart, A. F.; Ramirez, P.; Zimdars, P.; Bryant, A. C.; Snow Data System Team

    2011-12-01

    Snow cover and its melt dominate regional climate and hydrology in many of the world's mountainous regions. One-sixth of Earth's population depends on snow- or glacier-melt for water resources. Operationally, seasonal forecasts of snowmelt-generated streamflow are leveraged through empirical relations based on past snowmelt periods. These historical data show that climate is changing, but the changes reduce the reliability of the empirical relations. Therefore optimal future management of snowmelt derived water resources will require explicit physical models driven by remotely sensed snow property data. Toward this goal, the Snow Optics Laboratory at the Jet Propulsion Laboratory has initiated a near real-time processing pipeline to generate and publish post-processed snow data products within a few hours of satellite acquisition. To solve this challenge, a Scientific Data Management and Processing System was required and the JPL Team leveraged an open-source project called Object Oriented Data Technology (OODT). OODT was developed within NASA's Jet Propulsion Laboratory across the last 10 years. OODT has supported various scientific data management and processing projects, providing solutions in the Earth, Planetary, and Medical science fields. It became apparent that the project needed to be opened to a larger audience to foster and promote growth and adoption. OODT was open-sourced at the Apache Software Foundation in November 2010 and has a growing community of users and committers that are constantly improving the software. Leveraging OODT, the JPL Snow Data System (SnowDS) Team was able to install and configure a core Data Management System (DMS) that would download MODIS raw data files and archive the products in a local repository for post processing. The team has since built an online data portal, and an algorithm-processing pipeline using the Apache OODT software as the foundation. We will present the working SnowDS system with its core remote sensing

  10. Inquiry on civil construction technology points of building engineering%建筑工程土建施工技术要点探究

    Institute of Scientific and Technical Information of China (English)

    赵成学

    2015-01-01

    依照建筑工程土建的施工要求,简单的总结了建筑工程土建施工的关键技术要点,主要包括混凝土施工、钢筋施工、砖砌筑施工、防水施工、模板施工五方面内容,以期达到提升建筑工程土建施工技术性能的目的。%According to civil construction demands of building engineering,the paper briefly summarizes critical civil construction technology points of building engineering,which mainly includes concrete construction,steel construction,brick masonry construction,waterproofing construc-tion and template construction,with a view to achieve the goal of improving civil construction technology performance of building engineering.

  11. [Software version and medical device software supervision].

    Science.gov (United States)

    Peng, Liang; Liu, Xiaoyan

    2015-01-01

    The importance of software version in the medical device software supervision does not cause enough attention at present. First of all, the effect of software version in the medical device software supervision is discussed, and then the necessity of software version in the medical device software supervision is analyzed based on the discussion of the misunderstanding of software version. Finally the concrete suggestions on software version naming rules, software version supervision for the software in medical devices, and software version supervision scheme are proposed.

  12. Technological capability building in MNE-Related social businesses of less developed countries : the experience of Grameen-Danone foods in Bangladesh

    NARCIS (Netherlands)

    Peerally, J.A.; Figueiredo, P.N.

    2013-01-01

    Although there has been considerable research on firm-level technological capability building in the context of developing economies, there is a scarcity of studies which examine this issue in multinational enterprises’ socially motivated businesses located in less developed economies. This paper ex

  13. Technological capability building in MNE-Related social businesses of less developed countries : the experience of Grameen-Danone foods in Bangladesh

    NARCIS (Netherlands)

    Peerally, J.A.; Figueiredo, P.N.

    2013-01-01

    Although there has been considerable research on firm-level technological capability building in the context of developing economies, there is a scarcity of studies which examine this issue in multinational enterprises’ socially motivated businesses located in less developed economies. This paper ex

  14. Resistance of Cast Iron Unified Module Recuperator of Heating Furnaces with High-Temperature Thermal Technologies at Machine Building, Automotive and Tractor Enterprises

    Directory of Open Access Journals (Sweden)

    A. P. Nesenchouk

    2010-01-01

    Full Text Available The paper contains a stress analysis in the field of elastic and elastic-plastic wall state of a cast iron module industrial recuperator of high-temperature technology furnaces applied in blank and mechanical assembly production at machine building enterprises.

  15. 加强房屋建筑地基施工技术的分析%Analysis on strengthening housing building foundation construction technology

    Institute of Scientific and Technical Information of China (English)

    沈俊桥

    2016-01-01

    分析了房屋建筑地基施工的必要性,阐述了地基施工过程中的基本要求,从基础选择、加固作业、静压桩处理等方面,提出了加强房屋建筑地基施工技术的措施,以有效提高房屋建筑的地基承载力,保证建筑工程质量。%The paper analyzes the necessity of housing building foundation construction,describes basis foundation construction,and puts forward measures of strengthening housing building foundation construction technology from aspects of foundation selection,reinforcement,and static pile treatment,with a view to effectively improve housing building foundation bearing capacity and to guarantee building engineering quality as well.

  16. Analysis of the Key and Difficult Points in the Engineering Construction Technology of the Steel Structures of a Super High-rise Building

    Science.gov (United States)

    Dou, Lijun; Li, Hengxu

    2017-07-01

    In recent years, with the rapid development of the economy of China, the traditional building structure has not been able to meet the current people’s demands and the super high-rise building has become a symbol of a city. In the current period, the research on the super high-rise building in the architectural industry of China is late and the technical blanks exist in some construction difficulties in the super high-rise steel structures. Based on the above, a brief analysis and discussion on the difficult construction technology in the steel structures of a super high-rise building and some measures are presented for reference of the relevant personnel in this paper.

  17. Clinical supervision training across contexts.

    Science.gov (United States)

    Tai, Joanna; Bearman, Margaret; Edouard, Vicki; Kent, Fiona; Nestel, Debra; Molloy, Elizabeth

    2016-08-01

    Clinicians require specific skills to teach or supervise students in the workplace; however, there are barriers to accessing faculty member development, such as time, cost and suitability. The Clinical Supervision Support Across Contexts (ClinSSAC) programme was designed to provide accessible interprofessional educator training to clinical supervisors across a wide range of clinical settings. In Australia there are increasing numbers of health care students, creating pressure on existing placements. Students are now increasingly learning in community settings, where clinicians have traditionally had less access to faculty member development. An interprofessional team collaborated in the development and implementation of ClinSSAC. A total of 978 clinicians participated in a face-to-face, interactive, introductory module to clinical supervision; 672 people accessed the equivalent online core module, with 23 per cent completing all activities. Additional profession-and discipline-specific modules were also developed. Formal project evaluation found that most participants rated the workshops as helpful or very helpful for their roles as clinical supervisors. Interdisciplinary learning from the workshops was reported to enable cross-discipline supervision. Large participant numbers and favourable ratings indicate a continuing need for basic training in education. Key factors to workshop success included expert facilitators, the interprofessional context and interactive model. The online modules were an important adjunct, and provided context-specific resources, but the low online completion rate suggests protected face-to-face time for faculty member development is still required. Programmes such as ClinSSAC have the capacity to promote interprofessional education and practice. There are barriers to accessing faculty member development, such as time, cost and suitability. © 2015 John Wiley & Sons Ltd.

  18. Thermal-comfort analysis and simulation for various low-energy cooling-technologies applied to an office building in a subtropical climate

    Energy Technology Data Exchange (ETDEWEB)

    Chowdhury, Ashfaque Ahmed; Rasul, M.G.; Khan, M.M.K. [College of Engineering and the Built Environment, Faculty of Sciences, Engineering and Health, Central Queensland University, Rockhampton, Qld 4702 (Australia)

    2008-06-15

    Simulation of buildings' thermal-performances is necessary to predict comfort of the occupants in buildings and to identify alternate cooling control-systems for achieving better indoor thermal environments. An analysis and prediction of thermal-comfort using DesignBuilder, based on the state-of-the-art building performance simulation software EnergyPlus, is carried out in an air-conditioned multi-storeyed building in the city of Rockhampton in Central Queensland, Australia. Rockhampton is located in a hot humid-region; therefore, indoor thermal-comfort is strongly affected by the outdoor climate. This study evaluates the actual thermal conditions of the Information Technology Division (ITD) building at Central Queensland University during winter and summer seasons and identifies the thermal comfort level of the occupants using low-energy cooling technologies namely, chilled ceiling (CC), economiser usages and pre-cooling. The Fanger comfort-model, Pierce two-node model and KSU two-node model were used to predict thermal performance of the building. A sophisticated building-analysis tool was integrated with the thermal comfort models for determining appropriate cooling-technologies for the occupants to be thermally comfortable while achieving sufficient energy savings. This study compares the predicted mean-vote (PMV) index on a seven-point thermal-sensation scale, calculated using the effective temperature and relative humidity for those cooling techniques. Simulated results show that systems using a chilled ceiling offer the best thermal comfort for the occupants during summer and winter in subtropical climates. The validity of the simulation results was checked with measured values of temperature and humidity for typical days in both summer and winter. The predicted results show a reasonable agreement with the measured data. (author)

  19. Creation of Polyurethane Injection Materials, Their Pilot-industrial Production, Development and Industrial Introduction of the Technology of Strengthening and Restoring the Operability of Damaged Constructions and Buildings

    Directory of Open Access Journals (Sweden)

    Marukha, V.І.

    2015-01-01

    Full Text Available Polyurethane and foam polyurethane fluid injection materials not conceding foreign analogues and technology technology of restoration and strengthening the operability of concrete and reinforced concrete structures and buildings damaged by cracks were developed. Normative and technical documentation on the injection materials and technological processes was created. The diagnosticrestoring complex for implementing the above technologies was designed, installed and utilized at the construction sites. The equipment is designed and manufactured; the technology of the research and industrial production of «A» and «B» components of injecting polyurethane materials is designed and developed. The pilot-scale batch is manufactured. Technological processes of preparation and application of the «A» and «B» componentsof the injecting materials in industrial conditions are worked out and implemented.

  20. Semi-supervised sparse coding

    KAUST Repository

    Wang, Jim Jing-Yan

    2014-07-06

    Sparse coding approximates the data sample as a sparse linear combination of some basic codewords and uses the sparse codes as new presentations. In this paper, we investigate learning discriminative sparse codes by sparse coding in a semi-supervised manner, where only a few training samples are labeled. By using the manifold structure spanned by the data set of both labeled and unlabeled samples and the constraints provided by the labels of the labeled samples, we learn the variable class labels for all the samples. Furthermore, to improve the discriminative ability of the learned sparse codes, we assume that the class labels could be predicted from the sparse codes directly using a linear classifier. By solving the codebook, sparse codes, class labels and classifier parameters simultaneously in a unified objective function, we develop a semi-supervised sparse coding algorithm. Experiments on two real-world pattern recognition problems demonstrate the advantage of the proposed methods over supervised sparse coding methods on partially labeled data sets.