WorldWideScience

Sample records for technology assessment volume

  1. Assessment of control technology for stationary sources. Volume II: control technology data tables. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Minicucci, D.; Herther, M.; Babb, L.; Kuby, W.

    1980-02-01

    This report, the Control Technology Data Tables, is the second volume of the three-volume final report for the contract. It presents in tabular format, qualitative descriptions of control options for the various sources and quantitative information on control technology cost, efficiency, reliability, energy consumption, other environmental impacts and application status. Also included is a code list which classifies the stationary sources examined by industry, process, and emission source.

  2. Slope excavation quality assessment and excavated volume calculation in hydraulic projects based on laser scanning technology

    Directory of Open Access Journals (Sweden)

    Chao Hu

    2015-04-01

    Full Text Available Slope excavation is one of the most crucial steps in the construction of a hydraulic project. Excavation project quality assessment and excavated volume calculation are critical in construction management. The positioning of excavation projects using traditional instruments is inefficient and may cause error. To improve the efficiency and precision of calculation and assessment, three-dimensional laser scanning technology was used for slope excavation quality assessment. An efficient data acquisition, processing, and management workflow was presented in this study. Based on the quality control indices, including the average gradient, slope toe elevation, and overbreak and underbreak, cross-sectional quality assessment and holistic quality assessment methods were proposed to assess the slope excavation quality with laser-scanned data. An algorithm was also presented to calculate the excavated volume with laser-scanned data. A field application and a laboratory experiment were carried out to verify the feasibility of these methods for excavation quality assessment and excavated volume calculation. The results show that the quality assessment indices can be obtained rapidly and accurately with design parameters and scanned data, and the results of holistic quality assessment are consistent with those of cross-sectional quality assessment. In addition, the time consumption in excavation project quality assessment with the laser scanning technology can be reduced by 70%−90%, as compared with the traditional method. The excavated volume calculated with the scanned data only slightly differs from measured data, demonstrating the applicability of the excavated volume calculation method presented in this study.

  3. Technical and economic assessment of fluidized bed augmented compressed air energy-storage system. Volume II. Introduction and technology assessment

    Energy Technology Data Exchange (ETDEWEB)

    Giramonti, A.J.; Lessard, R.D.; Merrick, D.; Hobson, M.J.

    1981-09-01

    The results are described of a study subcontracted by PNL to the United Technologies Research Center on the engineering feasibility and economics of a CAES concept which uses a coal fired, fluidized bed combustor (FBC) to heat the air being returned from storage during the power production cycle. By burning coal instead of fuel oil, the CAES/FBC concept can completely eliminate the dependence of compressed air energy storage on petroleum fuels. The results of this assessment effort are presented in three volumes. Volume II presents a discussion of program background and an in-depth coverage of both fluid bed combustion and turbomachinery technology pertinent to their application in a CAES power plant system. The CAES/FBC concept appears technically feasible and economically competitive with conventional CAES. However, significant advancement is required in FBC technology before serious commercial commitment to CAES/FBC can be realized. At present, other elements of DOE, industrial groups, and other countries are performing the required R and D for advancement of FBC technology. The CAES/FBC will be reevaluated at a later date when FBC technology has matured and many of the concerns now plaguing FBC are resolved. (LCL)

  4. Western oil-shale development: a technology assessment. Volume 2: technology characterization and production scenarios

    Energy Technology Data Exchange (ETDEWEB)

    1982-01-01

    A technology characterization of processes that may be used in the oil shale industry is presented. The six processes investigated are TOSCO II, Paraho Direct, Union B, Superior, Occidental MIS, and Lurgi-Ruhrgas. A scanario of shale oil production to the 300,000 BPD level by 1990 is developed. (ACR)

  5. Technology assessment of future intercity passenger transportation systems. Volume 6: Impact assessment

    Science.gov (United States)

    1976-01-01

    Consequences that might occur if certain technological developments take place in intercity transportation are described. These consequences are broad ranging, and include economic, environmental, social, institutional, energy-related, and transportation service implications. The possible consequences are traced through direct (primary) impacts to indirect (secondary, tertiary, etc.) impacts. Chains of consequences are traced, reaching as far beyond the original transportation cause as is necessary to identify all impacts felt to be influenced significantly by the technological development considered.

  6. Assessment of control technology for stationary sources. Volume I: technical discussion. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Minicucci, D.; Herther, M.; Babb, L.; Kuby, W.

    1980-02-01

    The purpose of this project was to develop a reference document for use by the Air Resources Board, local air pollution control districts, and the U.S. Environmental Protection Agency that describes technological options available for the control of emissions from stationary sources located in California. Control technologies were examined for 10 industry groups and six air pollutants. Volume I, Technical Discussion, includes an overall introduction to the project, descriptions of its major elements, background information for each industry group addressed, and the project bibliography. In Volume II, Control Technology Data Tables, qualitative descriptions of control options for the various sources and quantitative information on control technology cost, efficiency, reliability, energy consumption, other environmental impacts, and application status are presented in tabular format. Also included is a code list that classifies the stationary sources examined by industry, process and emission source.

  7. Solar/hydrogen systems technologies. Volume II (Part 1 of 2). Solar/hydrogen systems assessment. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Escher, W. J.D.; Foster, R. W.; Tison, R. R.; Hanson, J. A.

    1980-06-02

    Volume II of the Solar/Hydrogen Systems Assessment contract report (2 volumes) is basically a technological source book. Relying heavily on expert contributions, it comprehensively reviews constituent technologies from which can be assembled a wide range of specific solar/hydrogen systems. Covered here are both direct and indirect solar energy conversion technologies; respectively, those that utilize solar radiant energy input directly and immediately, and those that absorb energy from a physical intermediary, previously energized by the sun. Solar-operated hydrogen energy production technologies are also covered in the report. The single most prominent of these is water electrolysis. Utilization of solar-produced hydrogen is outside the scope of the volume. However, the important hydrogen delivery step is treated under the delivery sub-steps of hydrogen transmission, distribution and storage. An exemplary use of the presented information is in the synthesis and analysis of those solar/hydrogen system candidates documented in the report's Volume I. Morever, it is intended that broad use be made of this technology information in the implementation of future solar/hydrogen systems. Such systems, configured on either a distributed or a central-plant basis, or both, may well be of major significance in effecting an ultimate transition to renewable energy systems.

  8. Solar/hydrogen systems technologies. Volume II (Part 2 of 2). Solar/hydrogen systems assessment. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Escher, W. J.D.; Foster, R. W.; Tison, R. R.; Hanson, J. A.

    1980-06-02

    Volume II of the Solar/Hydrogen Systems Assessment contract report (2 volumes) is basically a technological source book. Relying heavily on expert contributions, it comprehensively reviews constituent technologies from which can be assembled a wide range of specific solar/hydrogen systems. Covered here are both direct and indirect solar energy conversion technologies; respectively, those that utilize solar radiant energy input directly and immediately, and those that absorb energy from a physical intermediary, previously energized by the sun. Solar-operated hydrogen energy production technologies are also covered in the report. The single most prominent of these is water electrolysis. Utilization of solar-produced hydrogen is outside the scope of the volume. However, the important hydrogen delivery step is treated under the delivery sub-steps of hydrogen transmission, distribution and storage. An exemplary use of the presented information is in the synthesis and analysis of those solar/hydrogen system candidates documented in the report's Volume I. Moreover, it is intended that broad use be made of this technology information in the implementation of future solar/hydrogen systems. Such systems, configured on either a distributed or a central-plant basis, or both, may well be a major significance in effecting an ultimate transition to renewable energy systems.

  9. Technology assessment of solar energy systems. Scenario development and methodology. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    Schiffman, Y.M.

    1981-07-01

    Included are a general overview of the Technology Assessment of Solar Energy systems (TASE) project and a description of the study approach, the development of the TASE scenarios, energy and environmental assumptions, and assumptions and forecasts of the FOSSIL2 National Energy Model upon which the TASE scenarios were based. The Strategic Environmental Assessment System (SEAS) model was used to generate the analytical data base for TASE. Improvements made to SEAS to allow it to model solar and biomass energy technologies are also described.

  10. Characterization of alternative electric generation technologies for the SPS comparative assessment: volume 2, central-station technologies

    Energy Technology Data Exchange (ETDEWEB)

    1980-08-01

    The SPS Concept Development and Evaluation Program includes a comparative assessment. An early first step in the assessment process is the selection and characterization of alternative technologies. This document describes the cost and performance (i.e., technical and environmental) characteristics of six central station energy alternatives: (1) conventional coal-fired powerplant; (2) conventional light water reactor (LWR); (3) combined cycle powerplant with low-Btu gasifiers; (4) liquid metal fast breeder reactor (LMFBR); (5) photovoltaic system without storage; and (6) fusion reactor.

  11. Western oil shale development: a technology assessment. Volume 1. Main report

    Energy Technology Data Exchange (ETDEWEB)

    1981-11-01

    The general goal of this study is to present the prospects of shale oil within the context of (1) environmental constraints, (2) available natural and economic resources, and (3) the characteristics of existing and emerging technology. The objectives are: to review shale oil technologies objectively as a means of supplying domestically produced fuels within environmental, social, economic, and legal/institutional constraints; using available data, analyses, and experienced judgment, to examine the major points of uncertainty regarding potential impacts of oil shale development; to resolve issues where data and analyses are compelling or where conclusions can be reached on judgmental grounds; to specify issues which cannot be resolved on the bases of the data, analyses, and experienced judgment currently available; and when appropriate and feasible, to suggest ways for the removal of existing uncertainties that stand in the way of resolving outstanding issues.

  12. Solar technology assessment project. Volume 3: Active space heating and hot water supply with solar energy

    Science.gov (United States)

    Karaki, S.; Loef, G. O. G.

    1981-04-01

    Several types of solar water heaters are described and assessed. These include thermosiphon water heaters and pump circulation water heaters. Auxiliary water heating is briefly discussed, and new and retrofit systems are compared. Liquid-based space heating systems and solar air heaters are described and assessed, auxiliary space heating are discussed, and new and retrofit solar space heating systems are compared. The status of flat plate collectors, evacuated tube collectors, and thermal storage systems is examined. Systems improvements, reliability, durability and maintenance are discussed. The economic assessment of space and water heating systems includes a comparison of new systems costs with conventional fuels, and sales history and projections. The variety of participants in the solar industry and users of solar heat is discussed, and various incentives and barriers to solar heating are examined. Several policy implications are discussed, and specific government actions are recommended.

  13. Survey of Technology with Possible Applications to United States Coast Guard Buoy Tenders. Volume 1. Technology Assessment.

    Science.gov (United States)

    1987-09-01

    performance. Zig - zag tests show SWATH ships have half the overshoot of conventional ships. At slow speeds, the widely separated propulsion units aid...Ii S2 2-13 C, Lb 0 00 2-14 ’rkpl I% -W N~ louw W ME ’ K’.MM w~~b Af’- w~t W pw -.J 1 W ’W SS U. C ’U . 2-15 Mill ll WRII9PqWWmWIK"-wPFll7TW W.F K...Evaluation of a Compound Cycle Engine for Shipboard Gensets," Report No. DTNSRDC-PASD-CR-1886. 6.19 Mills , R.G., "Innovative Technology on Steam

  14. Modern Chemical Technology, Volume 5.

    Science.gov (United States)

    Pecsok, Robert L., Ed.; Chapman, Kenneth, Ed.

    This volume contains chapters 26-31 for the American Chemical Society (ACS) "Modern Chemical Technology" (ChemTeC) instructional material intended to prepare chemical technologists. Chapter 26 reviews oxidation and reduction, including applications in titrations with potassium permanganate and iodometry. Coordination compounds are…

  15. Assessment of the use of space technology in the monitoring of oil spills and ocean pollution: Technical volume. Executive summary

    Science.gov (United States)

    Alvarado, U. R. (Editor); Chafaris, G.; Chestek, J.; Contrad, J.; Frippel, G.; Gulatsi, R.; Heath, A.; Hodara, H.; Kritikos, H.; Tamiyasu, K.

    1980-01-01

    The potential of space systems and technology for detecting and monitoring ocean oil spills and waste pollution was assessed as well as the impact of this application on communication and data handling systems. Agencies charged with responsibilities in this area were identified and their measurement requirements were ascertained in order to determine the spatial resolution needed to characterize operational and accidental discharges. Microwave and optical sensors and sensing techniques were evaluated as candidate system elements. Capabilities are described for the following: synthetic aperture radar, microwave scatterometer, passive microwave radiometer, microwave altimeter, electro-optical sensors currently used in airborne detection, existing space-based optical sensors, the thematic mapper, and the pointable optical linear array.

  16. Educational Media and Technology Yearbook, 1992. Volume 18.

    Science.gov (United States)

    Ely, Donald P., Ed.; Minor, Barbara B., Ed.

    The Educational Media and Technology Yearbook (EMTY) is designed to provide media and instructional technology professionals with an up-to-date, single-source overview and assessment of the field of educational technology. Each volume addresses current issues, notes trends, and provides current listings of and background information about the…

  17. FY02 Engineering Technology Reports Volume 1: Technology Base

    Energy Technology Data Exchange (ETDEWEB)

    Minichino, C; Meeker, D

    2003-01-28

    Engineering has touched on every challenge, every accomplishment, and every endeavor of Lawrence Livermore National Laboratory during its fifty-year history. In this time of transition to new leadership, Engineering continues to be central to the mission of the Laboratory, returning to the tradition and core values of E. O. Lawrence: science-based engineering--turning scientific concepts into reality. This volume of Engineering Technical Reports summarizes progress on the projects funded for technology-base efforts. Technology-base projects effect the natural transition to reduction-to-practice of scientific or engineering methods that are well understood and established. They represent discipline-oriented, core competency activities that are multi-programmatic in application, nature, and scope. Objectives of technology-base funding include: (1) the development and enhancement of tools and processes to provide Engineering support capability, such as code maintenance and improved fabrication methods; (2) the support of Engineering science and technology infrastructure, such as the installation or integration of a new capability; (3) support for technical and administrative leadership through our technology Centers; and (4) the initial scoping and exploration of selected technology areas with high strategic potential, such as assessment of university, laboratory, and industrial partnerships. Five Centers focus and guide longer-term investments within Engineering. The Centers attract and retain top staff, develop and maintain critical core technologies, and enable programs. Through their technology-base projects, they oversee the application of known engineering approaches and techniques to scientific and technical problems.

  18. FIELD DEMONSTRATION OF INNOVATIVE CONDITION ASSESSMENT TECHNOLOGIES FOR WATER MAINS: ACOUSTIC PIPE WALL ASSESSMENT, INTERNAL INSPECTION, AND EXTERNAL INSPECTIONVOLUME 1: TECHNICAL REPORT AND VOLUME 2: APPENDICES

    Science.gov (United States)

    Nine pipe wall integrity assessment technologies were demonstrated on a 76-year-old, 2,057-ft-long portion of a cement-lined, 24-in. cast iron water main in Louisville, KY. This activity was part of a series of field demonstrations of innovative leak detection/location and condi...

  19. Human choice and climate change. Volume 2: Resources and technology

    Energy Technology Data Exchange (ETDEWEB)

    Raynor, S.; Malone, E. [eds.] [Pacific Northwest National Lab., Richland, WA (United States)

    1998-12-31

    This book is Volume 2 of a four-volume set which assesses social science research that is relevant to global climate change from a wide-ranging interdisciplinary perspective. Attention is focused on resources and technology as they relate to climate change. This series is indispensable reading for scientists and engineers wishing to make an effective contribution to the climate change policy debate.

  20. Advocacy and technology assessment

    Science.gov (United States)

    Jones, E. M.

    1975-01-01

    A highly structured treatment is presented of adversarial systems as they apply to technology assessment. One approach to the problem of adequate criteria of assessment focuses upon the internal operations of assessment entities; operations include problem perception, problem formulation, selection, utilization, determination, and evaluation. Potential contributions of advocacy as a mode of inquiry in technology are discussed; advocacy is evaluated by representative sets of criteria of adequate assessment which include participant criteria, perspectives criteria, situations criteria, base values criteria, and strategies criteria.

  1. Engineering Technology Reports, Volume 2: Technology Base FY01

    Energy Technology Data Exchange (ETDEWEB)

    Minichino, C; Meeker, D

    2002-07-01

    Engineering has touched on every challenge, every accomplishment, and every endeavor of Lawrence Livermore National Laboratory during its fifty-year history. In this time of transition to new leadership, Engineering continues to be central to the mission of the Laboratory, returning to the tradition and core values of E.O. Lawrence: science-based engineering--turning scientific concepts into reality. This volume of Engineering Technical Reports summarizes progress on the projects funded for technology-base efforts. Technology-base projects effect the natural transition to reduction-to-practice of scientific or engineering methods that are well understood and established. They represent discipline-oriented, core competency activities that are multi-programmatic in application, nature, and scope. Objectives of technology-base funding include: (1) the development and enhancement of tools and processes to provide Engineering support capability, such as code maintenance and improved fabrication methods; (2) the support of Engineering science and technology infrastructure, such as the installation or integration of a new capability; (3) support for technical and administrative leadership through our technology Centers; (4) the initial scoping and exploration of selected technology areas with high strategic potential, such as assessment of university, laboratory, and industrial partnerships.

  2. Volume 9: A Review of Socioeconomic Impacts of Oil Shale Development WESTERN OIL SHALE DEVELOPMENT: A TECHNOLOGY ASSESSMENT

    Energy Technology Data Exchange (ETDEWEB)

    Rotariu, G. J.

    1982-02-01

    recognize that the rate of development, the magnitude of development, and the technology mix that will actually take place remain uncertain. Although we emphasize that other energy and mineral resources besides oil shale may be developed, the conclusions reached in this study reflect only those impacts that would be felt from the oil shale scenario. Socioeconomic impacts in the region reflect the uneven growth rate implied by the scenario and will be affected by the timing of industry developments, the length and magnitude of the construction phase of development, and the shift in employment profiles predicted in the scenario. The facilities in the southern portion of the oil shale region, those along the Colorado River and Parachute Creek, show a peak in the construction work force in the mid-1980s, whereas those f acil it i es in the Piceance Creek Bas into the north show a construction peak in the late 1980s. Together, the facilities will require a large construction work force throughout the decade, with a total of 4800 construction workers required in 1985. Construction at the northern sites and second phase construction in the south will require 6000 workers in 1988. By 1990, the operation work force will increase to 7950. Two important characteristics of oil shale development emerge from the work force estimates: (1) peak-year construction work forces will be 90-120% the size of the permanent operating work force; and (2) the yearly changes in total work force requirements will be large, as much as 900 in one year at one facility. To estimate population impacts on individual communities, we devised a population distribution method that is described in Sec. IV. Variables associated with the projection of population impacts are discussed and methodologies of previous assessments are compared. Scenario-induced population impacts estimated by the Los Alamos method are compared to projections of a model employed by the Colorado West Area Council of Governments. Oil shale

  3. Aerospace Technology Innovation. Volume 9

    Science.gov (United States)

    Turner, Janelle (Editor); Cousins, Liz (Editor)

    2001-01-01

    Commercializing technology is a daunting task. Of every 11 new product ideas, only one will successfully make it to the marketplace. Fully 46% of new product investment becomes sunk in cost. Yet, a few good companies consistently attain an 80% technology commercialization success rate and have lead the way in establishing best practices. The NASA Incubator program consists of nine incubators, each residing near a NASA research center. The purpose of the incubators is to use the best practices is to use the best practices of technology commercialization to help early stage businesses successfully launch new products that incorporate NASA technology.

  4. Modern Chemical Technology, Volume 9.

    Science.gov (United States)

    Pecsok, Robert L.; Chapman, Kenneth

    This volume is one of the series for the Chemical Technician Curriculum Project (ChemTeC) of the American Chemical Society funded by the National Science Foundation. It consists of discussions, exercises, and experiments on the following topics: ion exchange, electrphoresis, dialysis, electrochemistry, corrosion, electrolytic cells, coulometry,…

  5. Volume 9: A Review of Socioeconomic Impacts of Oil Shale Development WESTERN OIL SHALE DEVELOPMENT: A TECHNOLOGY ASSESSMENT

    Energy Technology Data Exchange (ETDEWEB)

    Rotariu, G. J.

    1982-02-01

    recognize that the rate of development, the magnitude of development, and the technology mix that will actually take place remain uncertain. Although we emphasize that other energy and mineral resources besides oil shale may be developed, the conclusions reached in this study reflect only those impacts that would be felt from the oil shale scenario. Socioeconomic impacts in the region reflect the uneven growth rate implied by the scenario and will be affected by the timing of industry developments, the length and magnitude of the construction phase of development, and the shift in employment profiles predicted in the scenario. The facilities in the southern portion of the oil shale region, those along the Colorado River and Parachute Creek, show a peak in the construction work force in the mid-1980s, whereas those f acil it i es in the Piceance Creek Bas into the north show a construction peak in the late 1980s. Together, the facilities will require a large construction work force throughout the decade, with a total of 4800 construction workers required in 1985. Construction at the northern sites and second phase construction in the south will require 6000 workers in 1988. By 1990, the operation work force will increase to 7950. Two important characteristics of oil shale development emerge from the work force estimates: (1) peak-year construction work forces will be 90-120% the size of the permanent operating work force; and (2) the yearly changes in total work force requirements will be large, as much as 900 in one year at one facility. To estimate population impacts on individual communities, we devised a population distribution method that is described in Sec. IV. Variables associated with the projection of population impacts are discussed and methodologies of previous assessments are compared. Scenario-induced population impacts estimated by the Los Alamos method are compared to projections of a model employed by the Colorado West Area Council of Governments. Oil shale

  6. Aerospace Technology Innovation. Volume 10

    Science.gov (United States)

    Turner, Janelle (Editor); Cousins, Liz (Editor); Bennett, Evonne (Editor); Vendette, Joel (Editor); West, Kenyon (Editor)

    2002-01-01

    Whether finding new applications for existing NASA technologies or developing unique marketing strategies to demonstrate them, NASA's offices are committed to identifying unique partnering opportunities. Through their efforts NASA leverages resources through joint research and development, and gains new insight into the core areas relevant to all NASA field centers. One of the most satisfying aspects of my job comes when I learn of a mission-driven technology that can be spun-off to touch the lives of everyday people. NASA's New Partnerships in Medical Diagnostic Imaging is one such initiative. Not only does it promise to provide greater dividends for the country's investment in aerospace research, but also to enhance the American quality of life. This issue of Innovation highlights the new NASA-sponsored initiative in medical imaging. Early in 2001, NASA announced the launch of the New Partnerships in Medical Diagnostic Imaging initiative to promote the partnership and commercialization of NASA technologies in the medical imaging industry. NASA and the medical imaging industry share a number of crosscutting technologies in areas such as high-performance detectors and image-processing tools. Many of the opportunities for joint development and technology transfer to the medical imaging market also hold the promise for future spin back to NASA.

  7. Information technology resources assessment

    Energy Technology Data Exchange (ETDEWEB)

    Stevens, D.F. [ed.

    1992-01-01

    This year`s Information Technology Resources Assessment (ITRA) is something of a departure from traditional practice. Past assessments have concentrated on developments in fundamental technology, particularly with respect to hardware. They form an impressive chronicle of decreasing cycle times, increasing densities, decreasing costs (or, equivalently, increasing capacity and capability per dollar spent), and new system architectures, with a leavening of operating systems and languages. Past assessments have aimed -- and succeeded -- at putting information technology squarely in the spotlight; by contrast, in the first part of this assessment, we would like to move it to the background, and encourage the reader to reflect less on the continuing technological miracles of miniaturization in space and time and more on the second- and third-order implications of some possible workplace applications of these miracles. This Information Technology Resources Assessment is intended to provide a sense of technological direction for planners in projecting the hardware, software, and human resources necessary to support the diverse IT requirements of the various components of the DOE community. It is also intended to provide a sense of our new understanding of the place of IT in our organizations.

  8. Information technology resources assessment

    Energy Technology Data Exchange (ETDEWEB)

    Stevens, D.F. (ed.)

    1992-01-01

    This year's Information Technology Resources Assessment (ITRA) is something of a departure from traditional practice. Past assessments have concentrated on developments in fundamental technology, particularly with respect to hardware. They form an impressive chronicle of decreasing cycle times, increasing densities, decreasing costs (or, equivalently, increasing capacity and capability per dollar spent), and new system architectures, with a leavening of operating systems and languages. Past assessments have aimed -- and succeeded -- at putting information technology squarely in the spotlight; by contrast, in the first part of this assessment, we would like to move it to the background, and encourage the reader to reflect less on the continuing technological miracles of miniaturization in space and time and more on the second- and third-order implications of some possible workplace applications of these miracles. This Information Technology Resources Assessment is intended to provide a sense of technological direction for planners in projecting the hardware, software, and human resources necessary to support the diverse IT requirements of the various components of the DOE community. It is also intended to provide a sense of our new understanding of the place of IT in our organizations.

  9. Health care technology assessment

    Science.gov (United States)

    Goodman, Clifford

    1994-12-01

    The role of technology in the cost of health care is a primary issue in current debates concerning national health care reform. The broad scope of studies for understanding technological impacts is known as technology assessment. Technology policy makers can improve their decision making by becoming more aware, and taking greater advantage, of key trends in health care technology assessment (HCTA). HCTA is the systematic evaluation of the properties, impacts, and other attributes of health care technologies, including: technical performance; clinical safety and efficacy/effectiveness; cost-effectiveness and other economic attributes; appropriate circumstances/indications for use; and social, legal, ethical, and political impacts. The main purpose of HCTA is to inform technology-related policy making in health care. Among the important trends in HCTA are: (1) proliferation of HCTA groups in the public and private sectors; (2) higher standards for scientific evidence concerning technologies; (3) methodological development in cost analyses, health-related quality of life measurement, and consolidation of available scientific evidence (e.g., meta-analysis); (4) emphasis on improved data on how well technologies work in routine practice and for traditionally under-represented patient groups; (5) development of priority-setting methods; (6) greater reliance on medical informatics to support and disseminate HCTA findings.

  10. Information Technology Resources Assessment

    Energy Technology Data Exchange (ETDEWEB)

    1993-04-01

    The Information Technology Resources Assessment (ITRA) is being published as a companion document to the Department of Energy (DOE) FY 1994--FY 1998 Information Resources Management Long-Range Plan. This document represents a collaborative effort between the Office of Information Resources Management and the Office of Energy Research that was undertaken to achieve, in part, the Technology Strategic Objective of IRM Vision 21. An integral part of this objective, technology forecasting provides an understanding of the information technology horizon and presents a perspective and focus on technologies of particular interest to DOE program activities. Specifically, this document provides site planners with an overview of the status and use of new information technology for their planning consideration.

  11. Technologies for Language Assessment.

    Science.gov (United States)

    Burstein, Jill; And Others

    1996-01-01

    Reviews current and developing technology uses that are relevant to language assessment and discusses examples of recent linguistic applications from the laboratory at the Educational Testing Service. The processes of language test development are described and the functions they serve from the perspective of a large testing organization are…

  12. Coal slurry combustion and technology. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    1983-01-01

    Volume II contains papers presented at the following sessions of the Coal Slurry Combustion and Technology Symposium: (1) bench-scale testing; (2) pilot testing; (3) combustion; and (4) rheology and characterization. Thirty-three papers have been processed for inclusion in the Energy Data Base. (ATT)

  13. Information technology resources assessment

    Energy Technology Data Exchange (ETDEWEB)

    Loken, S.C. [ed.

    1993-01-01

    The emphasis in Information Technology (IT) development has shifted from technology management to information management, and the tools of information management are increasingly at the disposal of end-users, people who deal with information. Moreover, the interactive capabilities of technologies such as hypertext, scientific visualization, virtual reality, video conferencing, and even database management systems have placed in the hands of users a significant amount of discretion over how these resources will be used. The emergence of high-performance networks, as well as network operating systems, improved interoperability, and platform independence of applications will eliminate technical barriers to the use of data, increase the power and range of resources that can be used cooperatively, and open up a wealth of possibilities for new applications. The very scope of these prospects for the immediate future is a problem for the IT planner or administrator. Technology procurement and implementation, integration of new technologies into the existing infrastructure, cost recovery and usage of networks and networked resources, training issues, and security concerns such as data protection and access to experiments are just some of the issues that need to be considered in the emerging IT environment. As managers we must use technology to improve competitiveness. When procuring new systems, we must take advantage of scalable resources. New resources such as distributed file systems can improve access to and efficiency of existing operating systems. In addition, we must assess opportunities to improve information worker productivity and information management through tedmologies such as distributed computational visualization and teleseminar applications.

  14. OAST Space Theme Workshop. Volume 3: Working group summary. 9: Aerothermodynamics (M-3). A: Statement. B: Technology needs (form 1). C. Priority assessment (form 2). D. Additional assessments

    Science.gov (United States)

    1976-01-01

    Twelve aerothermodynamic space technology needs were identified to reduce the design uncertainties in aerodynamic heating and forces experienced by heavy lift launch vehicles, orbit transfer vehicles, and advanced single stage to orbit vehicles for the space transportation system, and for probes, planetary surface landers, and sample return vehicles for solar system exploration vehicles. Research and technology needs identified include: (1) increasing the fluid dynamics capability by at least two orders of magnitude by developing an advanced computer processor for the solution of fluid dynamic problems with improved software; (2) predicting multi-engine base flow fields for launch vehicles; and (3) developing methods to conserve energy in aerothermodynamic ground test facilities.

  15. Computer vision technology in log volume inspection

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Log volume inspection is very important in forestry research and paper making engineering. This paper proposed a novel approach based on computer vision technology to cope with log volume inspection. The needed hardware system was analyzed and the details of the inspection algorithms were given. A fuzzy entropy based on image enhancement algorithm was presented for enhancing the image of the cross-section of log. In many practical applications the cross-section is often partially invisible, and this is the major obstacle for correct inspection. To solve this problem, a robust Hausdorff distance method was proposed to recover the whole cross-section. Experiment results showed that this method was efficient.

  16. Photovoltaic technology assessment

    Energy Technology Data Exchange (ETDEWEB)

    Backus, C.E.

    1981-01-01

    After a brief review of the history of photovoltaic devices and a discussion of the cost goals set for photovoltaic modules, the status of photovoltaic technology is assessed. Included are discussions of: current applications, present industrial production, low-cost silicon production techniques, energy payback periods for solar cells, advanced materials research and development, concentrator systems, balance-of-system components. Also discussed are some nontechnical aspects, including foreign markets, US government program approach, and industry attitudes and approaches. (LEW)

  17. OAST Space Theme Workshop. Volume 3: Working group summary. 2: Data handling, communications (E-2). A. Statement. B. Technology needs (form 1). C. Priority assessment (form 2)

    Science.gov (United States)

    1976-01-01

    Technologies required to support the stated OAST thrust to increase information return by X1000, while reducing costs by a factor of 10 are identified. The most significant driver is the need for an overall end-to-end data system management technology. Maximum use of LSI component technology and trade-offs between hardware and software are manifest in most all considerations of technology needs. By far, the greatest need for data handling technology was identified for the space Exploration and Global Services themes. Major advances are needed in NASA's ability to provide cost effective mass reduction of space data, and automated assessment of earth looking imagery, with a concomitant reduction in cost per useful bit. A combined approach embodying end-to-end system analysis, with onboard data set selection, onboard data processing, highly parallel image processing (both ground and space), low cost, high capacity memories, and low cost user data distribution systems would be necessary.

  18. Depleted Uranium Hexafluoride Management Program. The technology assessment report for the long-term management of depleted uranium hexafluoride. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    Zoller, J.N.; Rosen, R.S.; Holliday, M.A. [and others

    1995-06-30

    With the publication of a Request for Recommendations and Advance Notice of Intent in the November 10, 1994 Federal Register, the Department of Energy initiated a program to assess alternative strategies for the long-term management or use of depleted uranium hexafluoride. This Request was made to help ensure that, by seeking as many recommendations as possible, Department management considers reasonable options in the long-range management strategy. The Depleted Uranium Hexafluoride Management Program consists of three major program elements: Engineering Analysis, Cost Analysis, and an Environmental Impact Statement. This Technology Assessment Report is the first part of the Engineering Analysis Project, and assesses recommendations from interested persons, industry, and Government agencies for potential uses for the depleted uranium hexafluoride stored at the gaseous diffusion plants in Paducah, Kentucky, and Portsmouth, Ohio, and at the Oak Ridge Reservation in Tennessee. Technologies that could facilitate the long-term management of this material are also assessed. The purpose of the Technology Assessment Report is to present the results of the evaluation of these recommendations. Department management will decide which recommendations will receive further study and evaluation. These Appendices contain the Federal Register Notice, comments on evaluation factors, independent technical reviewers resumes, independent technical reviewers manual, and technology information packages.

  19. Depleted Uranium Hexafluoride Management Program. The technology assessment report for the long-term management of depleted uranium hexafluoride. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    Zoller, J.N.; Rosen, R.S.; Holliday, M.A. [and others

    1995-06-30

    With the publication of a Request for Recommendations and Advance Notice of Intent in the November 10, 1994 Federal Register, the Department of Energy initiated a program to assess alternative strategies for the long-term management or use of depleted uranium hexafluoride. This Request was made to help ensure that, by seeking as many recommendations as possible, Department management considers reasonable options in the long-range management strategy. The Depleted Uranium Hexafluoride Management Program consists of three major program elements: Engineering Analysis, Cost Analysis, and an Environmental Impact Statement. This Technology Assessment Report is the first part of the Engineering Analysis Project, and assesses recommendations from interested persons, industry, and Government agencies for potential uses for the depleted uranium hexafluoride stored at the gaseous diffusion plants in Paducah, Kentucky, and Portsmouth, Ohio, and at the Oak Ridge Reservation in Tennessee. Technologies that could facilitate the long-term management of this material are also assessed. The purpose of the Technology Assessment Report is to present the results of the evaluation of these recommendations. Department management will decide which recommendations will receive further study and evaluation.

  20. OAST Space Theme Workshop. Volume 3: Working group summary. 4: Software (E-4). A. Summary. B. Technology needs (form 1). C. Priority assessment (form 2)

    Science.gov (United States)

    1976-01-01

    Only a few efforts are currently underway to develop an adequate technology base for the various themes. Particular attention must be given to software commonality and evolutionary capability, to increased system integrity and autonomy; and to improved communications among the program users, the program developers, and the programs themselves. There is a need for quantum improvement in software development methods and increasing the awareness of software by all concerned. Major thrusts identified include: (1) data and systems management; (2) software technology for autonomous systems; (3) technology and methods for improving the software development process; (4) advances related to systems of software elements including their architecture, their attributes as systems, and their interfaces with users and other systems; and (5) applications of software including both the basic algorithms used in a number of applications and the software specific to a particular theme or discipline area. The impact of each theme on software is assessed.

  1. Technology assessment heat pumps

    Energy Technology Data Exchange (ETDEWEB)

    Rudolph, R.; Purper, G. (Battelle-Institut e.V., Frankfurt am Main (Germany, F.R.))

    Technology assessment for an increased application of heat pumps is carried out in four areas: Effects in the economics area, i.e. effects on the economic goals which are defined in the Stability Law, on the goals of the power supply policy which result from the energy programme and its projections, and on the economic structure as a whole. The whole range of social problems concerning the use of heat pumps, i.e. the questions which social groups are affected, how they react, and what consequences are they expected to have on energy conservation as an object of social policy. Consequences in the governmental and administrative sectors, i.e. effects on legislation, administration and government budgets. Effects on the ecological systems; of prime interest in this context are the utilisation of environmental energy, changes in the heat balance, and emmission of pollutants.

  2. Technology Performance Level Assessment Methodology.

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, Jesse D.; Bull, Diana L; Malins, Robert Joseph; Costello, Ronan Patrick; Aurelien Babarit; Kim Nielsen; Claudio Bittencourt Ferreira; Ben Kennedy; Kathryn Dykes; Jochem Weber

    2017-04-01

    The technology performance level (TPL) assessments can be applied at all technology development stages and associated technology readiness levels (TRLs). Even, and particularly, at low TRLs the TPL assessment is very effective as it, holistically, considers a wide range of WEC attributes that determine the techno-economic performance potential of the WEC farm when fully developed for commercial operation. The TPL assessment also highlights potential showstoppers at the earliest possible stage of the WEC technology development. Hence, the TPL assessment identifies the technology independent “performance requirements.” In order to achieve a successful solution, the entirety of the performance requirements within the TPL must be considered because, in the end, all the stakeholder needs must be achieved. The basis for performing a TPL assessment comes from the information provided in a dedicated format, the Technical Submission Form (TSF). The TSF requests information from the WEC developer that is required to answer the questions posed in the TPL assessment document.

  3. Preliminary assessment of the health and environmental effects of coal utilization in the midwest. Volume I. Energy scenarios, technology characterizations, air and water resource impacts, and health effects

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-01-01

    An initial evaluation of the major health and environmental issues associated with increased coal use in the six midwestern states of Illinois, Indiana, Michigan, Minnesota, Ohio, and Wisconsin is presented. Using an integrated assessment approach, the evaluation proceeds from a base-line scenario of energy demand and facility siting for the period 1975 to 2020. Emphasis is placed on impacts from coal extraction, land reclamation, coal combustion for electrical generation, and coal gasification. The range of potential impacts and constraints is illustrated by a second scenario that represents an expected upper limit for coal utilization in Illinois. Included are: (1) a characterization of the energy demand and siting scenarios, coal related technologies, and coal resources, and (2) the related impacts on air quality, water availability, water quality, and human health.

  4. Melter Technologies Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Perez, J.M. Jr. [Pacific Northwest National Lab., Richland, WA (United States); Schumacher, R.F. [Savannah River Technology Center, Aiken, SC (United States); Forsberg, C.W. [Oak Ridge National Lab., TN (United States)

    1996-05-01

    The problem of controlling and disposing of surplus fissile material, in particular plutonium, is being addressed by the US Department of Energy (DOE). Immobilization of plutonium by vitrification has been identified as a promising solution. The Melter Evaluation Activity of DOE`s Plutonium Immobilization Task is responsible for evaluating and selecting the preferred melter technologies for vitrification for each of three immobilization options: Greenfield Facility, Adjunct Melter Facility, and Can-In-Canister. A significant number of melter technologies are available for evaluation as a result of vitrification research and development throughout the international communities for over 20 years. This paper describes an evaluation process which will establish the specific requirements of performance against which candidate melter technologies can be carefully evaluated. Melter technologies that have been identified are also described.

  5. Turbine imaging technology assessment

    Energy Technology Data Exchange (ETDEWEB)

    Moursund, R. A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Carlson, T. J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2004-12-01

    The goal of this project was to identify and evaluate imaging technologies for observing juvenile fish within a Kaplan turbine, and specifically that would enable scientists to determine mechanisms of fish injury within an operating turbine unit. This report documents the opportunities and constraints for observing juvenile fish at specific locations during turbine passage. These observations were used to make modifications to dam structures and operations to improve conditions for fish passage while maintaining or improving hydropower production. The physical and hydraulic environment that fish experience as they pass through the hydroelectric plants were studied and the regions with the greatest potential for injury were defined. Biological response data were also studied to determine the probable types of injuries sustained in the turbine intake and what types of injuries are detectable with imaging technologies. The study grouped injury-causing mechanisms into two categories: fluid (pressure/cavitation, shear, turbulence) and mechanical (strike/collision, grinding/pinching, scraping). The physical constraints of the environment, together with the likely types of injuries to fish, provided the parameters needed for a rigorous imaging technology evaluation. Types of technology evaluated included both tracking and imaging systems using acoustic technologies (such as sonar and acoustic tags) and optic technologies (such as pulsed-laser videography, which is high-speed videography using a laser as the flash). Criteria for determining image data quality such as frame rate, target detectability, and resolution were used to quantify the minimum requirements of an imaging sensor.

  6. Computational fluid dynamics assessment: Volume 1, Computer simulations of the METC (Morgantown Energy Technology Center) entrained-flow gasifier: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Celik, I.; Chattree, M.

    1988-07-01

    An assessment of the theoretical and numerical aspects of the computer code, PCGC-2, is made; and the results of the application of this code to the Morgantown Energy Technology Center (METC) advanced gasification facility entrained-flow reactor, ''the gasifier,'' are presented. PCGC-2 is a code suitable for simulating pulverized coal combustion or gasification under axisymmetric (two-dimensional) flow conditions. The governing equations for the gas and particulate phase have been reviewed. The numerical procedure and the related programming difficulties have been elucidated. A single-particle model similar to the one used in PCGC-2 has been developed, programmed, and applied to some simple situations in order to gain insight to the physics of coal particle heat-up, devolatilization, and char oxidation processes. PCGC-2 was applied to the METC entrained-flow gasifier to study numerically the flash pyrolysis of coal, and gasification of coal with steam or carbon dioxide. The results from the simulations are compared with measurements. The gas and particle residence times, particle temperature, and mass component history were also calculated and the results were analyzed. The results provide useful information for understanding the fundamentals of coal gasification and for assessment of experimental results performed using the reactor considered. 69 refs., 35 figs., 23 tabs.

  7. Computational fluid dynamics assessment: Volume 1, Computer simulations of the METC (Morgantown Energy Technology Center) entrained-flow gasifier: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Celik, I.; Chattree, M.

    1988-07-01

    An assessment of the theoretical and numerical aspects of the computer code, PCGC-2, is made; and the results of the application of this code to the Morgantown Energy Technology Center (METC) advanced gasification facility entrained-flow reactor, ''the gasifier,'' are presented. PCGC-2 is a code suitable for simulating pulverized coal combustion or gasification under axisymmetric (two-dimensional) flow conditions. The governing equations for the gas and particulate phase have been reviewed. The numerical procedure and the related programming difficulties have been elucidated. A single-particle model similar to the one used in PCGC-2 has been developed, programmed, and applied to some simple situations in order to gain insight to the physics of coal particle heat-up, devolatilization, and char oxidation processes. PCGC-2 was applied to the METC entrained-flow gasifier to study numerically the flash pyrolysis of coal, and gasification of coal with steam or carbon dioxide. The results from the simulations are compared with measurements. The gas and particle residence times, particle temperature, and mass component history were also calculated and the results were analyzed. The results provide useful information for understanding the fundamentals of coal gasification and for assessment of experimental results performed using the reactor considered. 69 refs., 35 figs., 23 tabs.

  8. Superconducting Technology Assessment

    Science.gov (United States)

    2005-08-01

    of Nb/Al- Nx /NbTiN junctions for SIS mixer applications,” IEEE Trans. Appl. Superconduct., vol. 11, pp. 76–79, Mar. 2001. [48] M. Gurvitch, W. A...Another connector developed by IBM for commercial applications using a dendritic interposer technology. A “beam-on-pad” approach developed by Siemens

  9. Technology Audit: Assessment of Innovative Portfolio

    Directory of Open Access Journals (Sweden)

    Kurushina Viktoria

    2016-01-01

    Full Text Available The article discusses the features of the technological audit performing in the companies of oil and gas sector of Russian economy. To measure the innovations quality level the scale was developed based on the Theory of Inventive Problem Solving and the theory of technological structures. Figures of the innovations quantity by levels, volume and quality of the innovative portfolio are offered for assessment the innovative portfolio quality. The method was tested on an example of oil and gas transporting enterprises. The results of the comparative analysis of innovative portfolio are shown.

  10. Health technology assessment in Finland

    DEFF Research Database (Denmark)

    Mäkelä, Marjukka; Roine, Risto P

    2010-01-01

    Since the 1990s, health policy makers in Finland have been supportive of evidence-based medicine and approaches to implement its results. The Finnish Office for Health Technology Assessment (Finohta) has grown from a small start in 1995 to a medium-sized health technology assessment (HTA) agency......, with special responsibility in providing assessments to underpin national policies in screening. External evaluations enhanced the rapid growth. In the Finnish environment, decision making on health technologies is extremely decentralized, so Finohta has developed some practical tools for implementing HTA...... findings. The Managed Uptake of Medical Methods program links the hospital districts to agree on introduction of technologies. The Ohtanen database provides Finnish-language summaries of major assessments made in other countries....

  11. A framework for evaluation of technology transfer programs. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    1993-07-01

    The objective of this volume is to describe a framework with which DOE can develop a program specific methodology to evaluate it`s technology transfer efforts. This approach could also be applied to an integrated private sector technology transfer organization. Several benefits will be realized from the application of this work. While the immediate effect will be to assist program managers in evaluating and improving program performance, the ultimate benefits will accrue to the producing industry, the states, and the nation in the form of sustained or increased domestic oil production. This benefit depends also, of course, on the effectiveness of the technology being transferred. The managers of the Technology Transfer program, and the larger federal oil and gas R&D programs, will be provided with a means to design and assess the effectiveness of program efforts as they are developed, tested and performed. The framework allows deficiencies in critical aspects of the program to be quickly identified, allowing for timely corrections and improvements. The actual process of developing the evaluation also gives the staff of the Oil R&D Program or Technology Transfer subprogram the opportunity to become oriented to the overall program goals. The structure and focus imposed by the evaluation paradigm will guide program staff in selecting activities which are consistent with achieving the goals of the overall R&D program.

  12. OAST Space Theme Workshop. Volume 3: Working Group Summary. 5: Propulsion (P-1). A. Summary Statement. B. Technology Needs (Form 1). C. Priority Assessments (Form 2)

    Science.gov (United States)

    1976-01-01

    All themes require some form of advanced propulsion capabilities to achieve their stated objectives. Requirements cover a broad spectrum ranging from a new generation of heavy lift launch vehicles to low thrust, long lift system for on-orbit operations. The commonality extant between propulsive technologies was established and group technologies were grouped into vehicle classes by functional capability. The five classes of launch vehicles identified by the space transportation theme were augmented with a sixth class, encompassing planetary and on-orbit operations. Propulsion technologies in each class were then ranked, and assigned priority numbers. Prioritized technologies were matched to theme requirements.

  13. Assessing Advanced Technology in CENATE

    Energy Technology Data Exchange (ETDEWEB)

    Tallent, Nathan R.; Barker, Kevin J.; Gioiosa, Roberto; Marquez, Andres; Kestor, Gokcen; Song, Shuaiwen; Tumeo, Antonino; Kerbyson, Darren J.; Hoisie, Adolfy

    2016-08-08

    PNNL's Center for Advanced Technology Evaluation (CENATE) is a new U.S. Department of Energy center whose mission is to assess and facilitate access to emerging computing technology. CENATE is assessing a range of advanced technologies, from evolutionary to disruptive. Technologies of interest include the processor socket (homogeneous and accelerated systems), memories (dynamic, static, memory cubes), motherboards, networks (network interface cards and switches), and input/output and storage devices. CENATE is developing a multi-perspective evaluation process based on integrating advanced system instrumentation, performance measurements, and modeling and simulation. We show evaluations of two emerging network technologies: silicon photonics interconnects and the Data Vortex network. CENATE's evaluation also addresses the question of which machine is best for a given workload under certain constraints. We show a performance-power tradeoff analysis of a well-known machine learning application on two systems.

  14. A Technology Assessment of Personal Computers. Vol. II: Personal Computer Technology, Users, and Uses.

    Science.gov (United States)

    Nilles, Jack M.

    This volume reports on the initial phase of a technology assessment of personal computers. First, technological developments that will influence the rate of diffusion of personal computer technology among the general populace are examined. Then the probable market for personal computers is estimated and analyzed on a functional basis, segregating…

  15. OAST Theme Workshop. Volume 3: Working group summary. 8: Structures, dynamics (M-2). A. Statement. B. Technology needs (form 1). C. Priority assessments (form 2)

    Science.gov (United States)

    1976-01-01

    A technology program on large space structures was defined to respond to common need perceived for five of the six themes. Greatly expanded power, facilities, and communications/sensing requirements appear to demand a new structures technology for construction in space. Requirements to construct huge structural arrays with precision surfaces in space will need creative research efforts to identify practical structural elements and construction techniques. Requirements for advanced transportation structures were defined to respond to the space transportation theme. Because of the criticality of thermal structures to achieve lower cost transportation systems, renewed emphasis on technology in this area is recommended. A second technology needing renewed emphasis is the area of recovery and landing technology structures to permit full reuse of launch vehicle propulsion elements.

  16. Computer technology -- 1996: Applications and methodology. PVP-Volume 326

    Energy Technology Data Exchange (ETDEWEB)

    Hulbert, G.M. [ed.] [Univ. of Michigan, Ann Arbor, MI (United States); Hsu, K.H. [ed.] [Babcock and Wilcox, Barberton, OH (United States); Lee, T.W. [ed.] [FMC Corp., Santa Clara, CA (United States); Nicholas, T. [ed.] [USAF Wright Laboratory, Wright-Patterson AFB, OH (United States)

    1996-12-01

    The primary objective of the Computer Technology Committee of the ASME Pressure Vessels and Piping Division is to promote interest and technical exchange in the field of computer technology, related to the design and analysis of pressure vessels and piping. The topics included in this volume are: analysis of bolted joints; nonlinear analysis, applications and methodology; finite element analysis and applications; and behavior of materials. Separate abstracts were prepared for 23 of the papers in this volume.

  17. Technology transfer from NASA to targeted industries, volume 2

    Science.gov (United States)

    Mccain, Wayne; Schroer, Bernard J.; Souder, William E.; Spann, Mary S.; Watters, Harry; Ziemke, M. Carl

    1993-01-01

    This volume contains the following materials to support Volume 1: (1) Survey of Metal Fabrication Industry in Alabama; (2) Survey of Electronics Manufacturing/Assembly Industry in Alabama; (3) Apparel Modular Manufacturing Simulators; (4) Synopsis of a Stereolithography Project; (5) Transferring Modular Manufacturing Technology to an Apparel Firm; (6) Letters of Support; (7) Fact Sheets; (8) Publications; and (9) One Stop Access to NASA Technology Brochure.

  18. OAST Space Theme Workshop. Volume 3: Working group summary. 7: Material (M-1). A. Statement. B. Technology needs (form 1). C. Priority assessment (form 2)

    Science.gov (United States)

    1976-01-01

    The approach of matching technology areas with various themes needs was not effective for the materials and thermal control discipline because of the diversity of requirements for each. Top priorities were evolved from the advanced space transportation system and the space power platform because these are essential building blocks in fulfilling some of the other themes. Important needs identified include life long-life cryogenic cooling systems for sensors, masers, and other devices and the needs for lightweight nuclear shielding materials for nuclear electric propulsion.

  19. OAST Space Theme Workshop. Volume 3: Working group summary. 6: Power (P-2). A. Statement. B. Technology needs (form 1). C. Priority assessment (form 2)

    Science.gov (United States)

    1976-01-01

    Power requirements for the multipurpose space power platform, for space industrialization, SETI, the solar system exploration facility, and for global services are assessed for various launch dates. Priorities and initiatives for the development of elements of space power systems are described for systems using light power input (solar energy source) or thermal power input, (solar, chemical, nuclear, radioisotopes, reactors). Systems for power conversion, power processing, distribution and control are likewise examined.

  20. Computer science research and technology volume 3

    CERN Document Server

    Bauer, Janice P

    2011-01-01

    This book presents leading-edge research from across the globe in the field of computer science research, technology and applications. Each contribution has been carefully selected for inclusion based on the significance of the research to this fast-moving and diverse field. Some topics included are: network topology; agile programming; virtualization; and reconfigurable computing.

  1. A Technology Assessment of Personal Computers. Vol. I: Summary.

    Science.gov (United States)

    Nilles, Jack M.

    This volume summarizes the results of a 2-year technology assessment of personal computers. The purpose of this study was to explore possible future modes of growth of the personal computer and related industries, to assess the impacts and consequences of that growth, and to present some of the policy issues and options which may arise as a…

  2. Oak Ridge K-25 Site Technology Logic Diagram. Volume 2, Technology Logic Diagrams

    Energy Technology Data Exchange (ETDEWEB)

    Fellows, R.L. [ed.

    1993-02-26

    The Oak Ridge K-25 Technology Logic Diagram (TLD), a decision support tool for the K-25 Site, was developed to provide a planning document that relates envirorunental restoration and waste management problems at the Oak Ridge K-25 Site to potential technologies that can remediate these problems. The TLD technique identifies the research necessary to develop these technologies to a state that allows for technology transfer and application to waste management, remedial action, and decontamination and decommissioning activities. The TLD consists of four separate volumes-Vol. 1, Vol. 2, Vol. 3A, and Vol. 3B. Volume 1 provides introductory and overview information about the TLD. This volume, Volume 2, contains logic diagrams with an index. Volume 3 has been divided into two separate volumes to facilitate handling and use.

  3. Augmented Reality Tower Technology Assessment

    Science.gov (United States)

    Reisman, Ronald J.; Brown, David M.

    2009-01-01

    Augmented Reality technology may help improve Air Traffic Control Tower efficiency and safety during low-visibility conditions. This paper presents the assessments of five off-duty controllers who shadow-controlled' with an augmented reality prototype in their own facility. Initial studies indicated unanimous agreement that this technology is potentially beneficial, though the prototype used in the study was not adequate for operational use. Some controllers agreed that augmented reality technology improved situational awareness, had potential to benefit clearance, control, and coordination tasks and duties and could be very useful for acquiring aircraft and weather information, particularly aircraft location, heading, and identification. The strongest objections to the prototype used in this study were directed at aircraft registration errors, unacceptable optical transparency, insufficient display performance in sunlight, inadequate representation of the static environment and insufficient symbology.

  4. Health technology assessment in Singapore.

    Science.gov (United States)

    Pwee, Keng Ho

    2009-07-01

    The Republic of Singapore is an island city-state in Southeast Asia. Its population enjoys good health and the Singapore Ministry of Health's mission is to promote good health and reduce illness, ensure access to good and affordable health care, and pursue medical excellence. This is achieved through a healthcare system that includes both private and public sector elements. The financing philosophy of Singapore's healthcare delivery system is based on individual responsibility and community support. Health care in Singapore is financed by a combination of taxes, employee medical benefits, compulsory health savings, insurance, and out-of-pocket payment. The capability for health technology assessment in Singapore was developed concurrently with its medical device regulation system in the 1990s. The first formal unit with health technology assessment (HTA) functions was established in September 1995. Today, HTA features in decision making for the Standard Drug List, licensing of medical clinics, the Health Service Development Programme, healthcare subsidies, and policy development. The public sector healthcare delivery clusters have also recently started health services research units with HTA functions. Singapore is organizing the 6th Health Technology Assessment International (HTAi) Annual Meeting in June 2009. Bringing this prestigious international conference to Asia for the first time will help raise awareness of HTA in the region.

  5. USAF Advanced Terrestrial Energy Study. Volume 2. Technology Handbook.

    Science.gov (United States)

    1983-04-01

    volume of Stirling svstems hecause the regenerator determines the dimensions of the system envelone. Table 27. STIRLING SYSTEM VOLUME (CUBIC FEET...Rankine Cycles Batteries Gas Turbines Stirling Engines Thermal Energy Storage 20. ABSTRACT (Confilime 4n roere. olde If neo**WY 41011184100140 & Wee bi A...TECHNOLOGY DESCRIPTIONS 13 Diesels, 13 Gas Turbines. 31 Stirlings , 49 Organic Rankine Cycle; 67 Fuel Cells 83 Photovoltaic Energy Conversion System, 102 Wind

  6. Technology transfer package on seismic base isolation - Volume III

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-02-14

    This Technology Transfer Package provides some detailed information for the U.S. Department of Energy (DOE) and its contractors about seismic base isolation. Intended users of this three-volume package are DOE Design and Safety Engineers as well as DOE Facility Managers who are responsible for reducing the effects of natural phenomena hazards (NPH), specifically earthquakes, on their facilities. The package was developed as part of DOE's efforts to study and implement techniques for protecting lives and property from the effects of natural phenomena and to support the International Decade for Natural Disaster Reduction. Volume III contains supporting materials not included in Volumes I and II.

  7. Health technology assessment in Mexico.

    Science.gov (United States)

    Gómez-Dantés, Octavio; Frenk, Julio

    2009-07-01

    The history of health technology assessment (HTA) in Mexico is examined, starting with the efforts to incorporate this topic into the policy agenda and culminating with the recent creation of a specialized public agency. Information was gathered through a bibliographic search and interviews with actors involved in HTA in Mexico. HTA efforts were developed in Mexico since the mid-1980s with the participation both of academics and of policy makers, a relationship that eventually led to the creation of the Center for Technological Excellence within the Ministry of Health. Institutionalization of HTA in resource-constrained settings requires the development of a critical mass of researchers involved in this field, the implementation of information efforts, and the establishment of strong relationships between HTA experts and policy makers.

  8. An Independent Scientific Assessment of Well Stimulation in California Volume III

    Energy Technology Data Exchange (ETDEWEB)

    Long, Jane C.S. [California Council on Science and Technology, Sacramento, CA (United States); Feinstein, Laura C. [California Council on Science and Technology, Sacramento, CA (United States); Birkholzer, Jens [California Council on Science and Technology, Sacramento, CA (United States); Foxall, William [California Council on Science and Technology, Sacramento, CA (United States); Houseworth, James [California Council on Science and Technology, Sacramento, CA (United States); Jordan, Preston [California Council on Science and Technology, Sacramento, CA (United States); Lindsey, Nathaniel [California Council on Science and Technology, Sacramento, CA (United States); Maddalena, Randy [California Council on Science and Technology, Sacramento, CA (United States); McKone, Thomas [California Council on Science and Technology, Sacramento, CA (United States); Stringfellow, William [California Council on Science and Technology, Sacramento, CA (United States); Ulrich, Craig [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Heberger, Matthew [Pacific Inst., Oakland, CA (United States); Shonkoff, Seth [PSE Healthy Energy, Berkeley, CA (United States); Brandt, Adam [Stanford Univ., CA (United States); Ferrar, Kyle [The FracTracker Alliance, Oakland, CA (United States); Gautier, Donald [DonGautier LLC., Palo Alto, CA (United States); Phillips, Scott [California State Univ. Stanislaus, Turlock, CA (United States); Greenfield, Ben [Univ. of California, Berkeley, CA (United States); Jerrett, Michael L.B. [Univ. of California, Los Angeles, CA (United States)

    2015-07-01

    This study is issued in three volumes. Volume I, issued in January 2015, describes how well stimulation technologies work, how and where operators deploy these technologies for oil and gas production in California, and where they might enable production in the future. Volume II, issued in July 2015, discusses how well stimulation could affect water, atmosphere, seismic activity, wildlife and vegetation, and human health. Volume II reviews available data, and identifies knowledge gaps and alternative practices that could avoid or mitigate these possible impacts. Volume III, this volume, presents case studies that assess environmental issues and qualitative risks for specific geographic regions. The Summary Report summarizes key findings, conclusions and recommendations of all three volumes.

  9. An Independent Scientific Assessment of Well Stimulation in California Volume II

    Energy Technology Data Exchange (ETDEWEB)

    Long, Jane C.S. [California Council on Science and Technology, Sacramento, CA (United States); Feinstein, Laura C. [California Council on Science and Technology, Sacramento, CA (United States); Bachmann, Corinne E. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Birkholzer, Jens T. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Camarillo, Mary Kay [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Domen, Jeremy K. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Foxall, William [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Houseworth, James [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Jin, Ling [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Jordan, Preston D. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Maddalena, Randy L. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); McKone, Thomas E. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Millstein, Dev E. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Reagan, Matthew T. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Sandelin, Whitney L. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Stringfellow, William T. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Varadharajan, Charuleka [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Cooley, Heather [Pacific Inst., Oakland, CA (United States); Donnelly, Kristina [Pacific Inst., Oakland, CA (United States); Heberger, Matthew G. [Pacific Inst., Oakland, CA (United States); Hays, Jake [PSE Healthy Energy, Berkeley, CA (United States); Shonkoff, Seth B.C. [PSE Healthy Energy, Berkeley, CA (United States); Brandt, Adam [Stanford Univ., CA (United States); Englander, Jacob G. [Stanford Univ., CA (United States); Hamdoun, Amro [Univ. of California of San Diego, La Jolla, CA (United States); Nicklisch, Sascha C.T. [Univ. of California of San Diego, La Jolla, CA (United States); Harrison, Robert J. [Univ. of California, San Francisco, CA (United States); Wettstein, Zachary S. [Univ. of California, San Francisco, CA (United States); Banbury, Jenner [California State Univ. Stanislaus, Turlock, CA (United States); Cypher, Brian L. [California State Univ. Stanislaus, Turlock, CA (United States); Phillips, Scott E. [California State Univ. Stanislaus, Turlock, CA (United States)

    2015-07-01

    This study is issued in three volumes. Volume I, issued in January 2015, describes how well stimulation technologies work, how and where operators deploy these technologies for oil and gas production in California, and where they might enable production in the future. Volume II, the present volume, discusses how well stimulation could affect water, atmosphere, seismic activity, wildlife and vegetation, and human health. Volume II reviews available data, and identifies knowledge gaps and alternative practices that could avoid or mitigate these possible impacts. Volume III, also issued in July 2015, presents case studies that assess environmental issues and qualitative risks for specific geographic regions. A final Summary Report summarizes key findings, conclusions and recommendations of all three volumes.

  10. Engineering Technology Reports, Volume 2: Technology Base FY00

    Energy Technology Data Exchange (ETDEWEB)

    Baron, A L; Langland, R T; Minichino, C

    2001-10-03

    In FY-2000, Engineering at Lawrence Livermore National Laboratory faced significant pressures to meet critical project milestones, and immediate demands to facilitate the reassignment of employees as the National Ignition Facility (the 600-TW laser facility being designed and built at Livermore, and one of the largest R&D construction projects in the world) was in the process of re-baselining its plan while executing full-speed its technology development efforts. This drive for change occurred as an unprecedented level of management and program changes were occurring within LLNL. I am pleased to report that we met many key milestones and achieved numerous technological breakthroughs. This report summarizes our efforts to perform feasibility and reduce-to-practice studies, demonstrations, and/or techniques--as structured through our technology centers. Whether using computational engineering to predict how giant structures like suspension bridges will respond to massive earthquakes or devising a suitcase-sized microtool to detect chemical and biological agents used by terrorists, we have made solid technical progress. Five Centers focus and guide longer-term investments within Engineering, as well as impact all of LLNL. Each Center is responsible for the vitality and growth of the core technologies it represents. My goal is that each Center will be recognized on an international scale for solving compelling national problems requiring breakthrough innovation. The Centers and their leaders are as follows: Center for Complex Distributed Systems--David B. McCallen; Center for Computational Engineering--Kyran D. Mish; Center for Microtechnology--Raymond P. Mariella, Jr.; Center for Nondestructive Characterization--Harry E. Martz, Jr.; and Center for Precision Engineering--Keith Carlisle.

  11. Technology Assessment Report: Aqueous Sludge Gasification Technologies

    Science.gov (United States)

    The study reveals that sludge gasification is a potentially suitable alternative to conventional sludge handling and disposal methods. However, very few commercial operations are in existence. The limited pilot, demonstration or commercial application of gasification technology t...

  12. Evaluation and Assessment in Educational Information Technology.

    Science.gov (United States)

    Liu, Leping, Ed.; Johnson, D. LaMont, Ed.; Maddux, Cleborne D., Ed.; Henderson, Norma J., Ed.

    This book contains the following articles on evaluating and assessing educational information technology: (1) "Assessing Learning in the New Age of Information Technology in Education" (Leping Liu, D. LaMont Johnson, Cleborne D. Maddux, and Norma J. Henderson); (2) "Instruments for Assessing the Impact of Technology in Education" (Rhonda…

  13. HVDC power transmission technology assessment

    Energy Technology Data Exchange (ETDEWEB)

    Hauth, R.L.; Tatro, P.J.; Railing, B.D. [New England Power Service Co., Westborough, MA (United States); Johnson, B.K.; Stewart, J.R. [Power Technologies, Inc., Schenectady, NY (United States); Fink, J.L.

    1997-04-01

    The purpose of this study was to develop an assessment of the national utility system`s needs for electric transmission during the period 1995-2020 that could be met by future reduced-cost HVDC systems. The assessment was to include an economic evaluation of HVDC as a means for meeting those needs as well as a comparison with competing technologies such as ac transmission with and without Flexible AC Transmission System (FACTS) controllers. The role of force commutated dc converters was to be assumed where appropriate. The assessment begins by identifying the general needs for transmission in the U.S. in the context of a future deregulated power industry. The possible roles for direct current transmission are then postulated in terms of representative scenarios. A few of the scenarios are illustrated with the help of actual U.S. system examples. non-traditional applications as well as traditional applications such as long lines and asynchronous interconnections are discussed. The classical ``break-even distance`` concept for comparing HVDC and ac lines is used to assess the selected scenarios. The impact of reduced-cost converters is reflected in terms of the break-even distance. This report presents a comprehensive review of the functional benefits of HVDC transmission and updated cost data for both ac and dc system components. It also provides some provocative thoughts on how direct current transmission might be applied to better utilize and expand our nation`s increasingly stressed transmission assets.

  14. Technology modernization assessment flexible automation

    Energy Technology Data Exchange (ETDEWEB)

    Bennett, D.W.; Boyd, D.R.; Hansen, N.H.; Hansen, M.A.; Yount, J.A.

    1990-12-01

    The objectives of this report are: to present technology assessment guidelines to be considered in conjunction with defense regulations before an automation project is developed to give examples showing how assessment guidelines may be applied to a current project to present several potential areas where automation might be applied successfully in the depot system. Depots perform primarily repair and remanufacturing operations, with limited small batch manufacturing runs. While certain activities (such as Management Information Systems and warehousing) are directly applicable to either environment, the majority of applications will require combining existing and emerging technologies in different ways, with the special needs of depot remanufacturing environment. Industry generally enjoys the ability to make revisions to its product lines seasonally, followed by batch runs of thousands or more. Depot batch runs are in the tens, at best the hundreds, of parts with a potential for large variation in product mix; reconfiguration may be required on a week-to-week basis. This need for a higher degree of flexibility suggests a higher level of operator interaction, and, in turn, control systems that go beyond the state of the art for less flexible automation and industry in general. This report investigates the benefits and barriers to automation and concludes that, while significant benefits do exist for automation, depots must be prepared to carefully investigate the technical feasibility of each opportunity and the life-cycle costs associated with implementation. Implementation is suggested in two ways: (1) develop an implementation plan for automation technologies based on results of small demonstration automation projects; (2) use phased implementation for both these and later stage automation projects to allow major technical and administrative risk issues to be addressed. 10 refs., 2 figs., 2 tabs. (JF)

  15. [Volume assessment in the acute heart and renal failure].

    Science.gov (United States)

    Vujicić, Bozidar; Ruzić, Alen; Zaputović, Luka; Racki, Sanjin

    2012-10-01

    Acute kidney injury (AKI) is an important clinical issue, especially in the setting of critical care. It has been shown in multiple studies to be a key independent risk factor for mortality, even after adjustment for demographics and severity of illness. There is wide agreement that a generally applicable classification system is required for AKI which helps to standardize estimation of severity of renal disfunction and to predict outcome associated with this condition. That's how RIFLE (Risk-Injury-Failure-Loss-End-stage renal disease), and AKIN (Acute Kidney Injury Network) classifications for AKI were found in 2004 and 2007, respectively. In the clinical setting of heart failure, a positive fluid balance (often expressed in the literature as weight gain) is used by disease management programs as a marker of heart failure decompensation. Oliguria is defined as urine output less than 0,3 ml/kg/h for at least 24 h. Since any delay in treatment can lead to a dangerous progression of the AKI, early recognition of oliguria appears to be crucial. Critically ill patients with oliguric AKI are at increased risk for fluid imbalance due to widespread systemic inflammation, reduced plasma oncotic pressure and increased capillary leak. These patients are particulary at risk of fluid overload and therefore restrictive strategy of fluid administration should be used. Objective, rapid and accurate volume assessment is important in undiagnosed patients presenting with critical illness, as errors may result in interventions with fatal outcomes. The historical tools such as physical exam, and chest radiography suffer from significant limitations. As gold standard, radioisolopic measurement of volume is impractical in the acute care enviroment. Newer technologies offer the promise of both rapid and accurate bedside estimation of volume status with the potential to improve clinical outcomes. Blood assessment with bioimpendance vector analysis, and bedside ultrasound seem to be

  16. National Coal Utilization Assessment. a preliminary assessment of the health and environmental effects of coal utilization in the Midwest. Volume I. Energy scenarios, technology characterizations, air and water resource impacts, and health effects

    Energy Technology Data Exchange (ETDEWEB)

    1977-01-01

    This report presents an initial evaluation of the major health and environmental issues associated with increased coal use in the six midwestern states of Illinois, Indiana, Michigan, Minnesota, Ohio, and Wisconsin. Using an integrated assessment approach, the evaluation proceeds from a base-line scenario of energy demand and facility siting for 1975-2020. Emphasis is placed on impacts from coal extraction, land reclamation, coal combustion for electrical generation, and coal gasification. The range of potential impacts and constraints is illustrated by a second scenario that represents an expected upper limit for coal utilization in Illinois. The following are among the more significant issues identified and evaluated in this study: If environmental and related issues can be resolved, coal will continue to be a major source of energy for the Midwest; existing sulfur emission constraints will increase use of western coal; the resource requirements and environmental impacts of coal utilization will require major significant environmental and economic tradeoffs in site selection; short-term (24-hr) ambient standards for sulfur dioxide will limit the sizes of coal facilities or require advanced control technologies; an impact on public health may result from long-range transport of airborne sulfur emissions from coal facilities in the Midwest; inadequately controlled effluents from coal gasification may cause violations of water-quality standards; the major ecological effects of coal extraction are from pre-mining and post-reclamation land use; and sulfur dioxide is the major potential contributor to effects on vegetation of atmospheric emissions from coal facilities.

  17. Technology-assisted dietary assessment

    Science.gov (United States)

    Zhu, Fengqing; Mariappan, Anand; Boushey, Carol J.; Kerr, Deb; Lutes, Kyle D.; Ebert, David S.; Delp, Edward J.

    2008-02-01

    Dietary intake provides valuable insights for mounting intervention programs for prevention of disease. With growing concern for adolescent obesity, the need to accurately measure diet becomes imperative. Assessment among adolescents is problematic as this group has irregular eating patterns and have less enthusiasm for recording food intake. Preliminary studies among adolescents suggest that innovative use of technology may improve the accuracy of diet information from young people. In this paper, we propose a novel food record method using a mobile device that will provide an accurate account of daily food and nutrient intake among adolescents. Our approach includes the use of image analysis tools for identification and quantification of food consumption. Images obtained before and after food is consumed can be used to estimate the diet of an individual. In this paper we describe our initial results and indicate the potential of the proposed system.

  18. 3-Dimensional Right Ventricular Volume Assessment

    NARCIS (Netherlands)

    Jainandunsing, Jayant S.; Matyal, Robina; Shahul, Sajid S.; Wang, Angela; Woltersom, Bozena; Mahmood, Feroze

    Purpose: The purpose of this review was to evaluate new computer software available for 3-dimensional right ventricular (RV) volume estimation. Description: Based on 2-dimensional echocardiography, various algorithms have been used for RV volume estimation. These are complex, time-consuming

  19. Oak Ridge K-25 Site Technology Logic Diagram. Volume 1, Technology evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Fellows, R.L. [ed.

    1993-02-26

    The Oak Ridge K-25 Technology Logic Diagram (TLD), a decision support tool for the K-25 Site, was developed to provide a planning document that relates environmental restoration and waste management problems at the Oak Ridge K-25 Site to potential technologies that can remediate these problems. The TLD technique identifies the research necessary to develop these technologies to a state that allows for technology transfer and application to waste management, remedial action, and decontamination and decommissioning activities. The TLD consists of four separate volumes-Vol. 1, Vol. 2, Vol. 3A, and Vol. 3B. This Volume, Volume 1 provides introductory and overview information about the TLD. Volume 2 contains logic diagrams. Volume 3 has been divided into two separate volumes to facilitate handling and use. This volume is divided into ten chapters. The first chapter is a brief introduction, and the second chapter details the technical approach of the TLD. These categories are the work activities necessary for successful decontamination and decommissioning, waste management, and remedial action of the K-25 Site. The categories are characterization, decontamination, dismantlement, robotics and automation, remedial action, and waste management. Materials disposition is addressed in Chap. 9. The final chapter contains regulatory compliance information concerning waste management, remedial action, and decontamination and decommissioning.

  20. Fort Stewart integrated resource assessment. Volume 3: Resource assessment

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, G.P.; Keller, J.M.; Stucky, D.J.; Wahlstrom, R.R.; Larson, L.L.

    1993-10-01

    The US Army Forces Command (FORSCOM) has tasked the US Department of Energy (DOE) Federal Energy Management Program (FEMP), supported by the Pacific Northwest Laboratory, to identify, evaluate, and assist in acquiring all cost-effective energy projects at Fort Stewart. This is part of a model program that PNL is designing to support energy-use decisions in the federal sector. This report provides the results of the fossil fuel and electric energy resource opportunity (ERO) assessments performed by PNL at the FORSCOM Fort Stewart facility located approximately 25 miles southwest of Savannah, Georgia. It is a companion report to Volume 1, Executive Summary, and Volume 2, Baseline Detail. The results of the analyses of EROs are presented in 11 common energy end-use categories (e.g., boilers and furnaces, service hot water, and building lighting). A narrative description of each ERO is provided, along with a table detailing information on the installed cost, energy and dollar savings; impacts on operations and maintenance (O&M); and, when applicable, a discussion of energy supply and demand, energy security, and environmental issues. A description of the evaluation methodologies and technical and cost assumptions is also provided for each ERO. Summary tables present the cost-effectiveness of energy end-use equipment before and after the implementation of each ERO. The tables also present the results of the life-cycle cost (LCC) analysis indicating the net present value (NPV) and savings to investment ratio (SIR) of each ERO.

  1. Research on surveying technology applied for DTM modelling and volume computation in open pit mines

    Directory of Open Access Journals (Sweden)

    Jaroslaw Wajs

    2016-01-01

    Full Text Available The spatial information systems of mining company can be used for monitoring of mining activity, excavation planning, calculations of the ore volume and decision making. Nowadays, data base has to be updated by sources such as surveying positioning technologies and remote sensed photogrammetry data. The presented paper contains review of the methodology for the digital terrain model, i.e. DTM, modelling and obtaining data from surveying technologies in an open pit mine or quarry. This paper reviews the application of GPS, total station measurements, and ground photogrammetry for the volume accuracy assessment of a selected object. The testing field was situated in Belchatow lignite open pit mine. A suitable object had been selected. The testing layer of coal seam was located at 8’th pit sidewall excavation area. The data were acquired two times within one month period and it was connected with monthly DTM actualization of excavation. This paper presents the technological process and the results of the research of using digital photogrammetry for opencast mining purposes in the scope of numerical volume computation and monitoring the mines by comparison of different sources. The results shows that the presented workflow allow to build DTM manually and remote sensed and the accuracy assessment was presented by the volume computation pathway. Major advantages of the techniques are presented illustrating how a terrestrial photogrammetry techniques provide rapid spatial measurements of breaklines 3D data utilized to volume calculation.

  2. ASSESSMENT OF QUALITY OF INNOVATIVE TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Larisa Alexejevna Ismagilova

    2016-12-01

    Full Text Available We consider the topical issue of implementation of innovative technologies in the aircraft engine building industry. In this industry, products with high reliability requirements are developed and mass-produced. These products combine the latest achievements of science and technology. To make a decision on implementation of innovative technologies, a comprehensive assessment is carried out. It affects the efficiency of the innovations realization. In connection with this, the assessment of quality of innovative technologies is a key aspect in the selection of technological processes for their implementation. Problems concerning assessment of the quality of new technologies and processes of production are considered in the suggested method with respect to new positions. The developed method of assessing the quality of innovative technologies stands out for formed system of the qualimetric characteristics ensuring the effectiveness, efficiency, adaptability of innovative technologies and processes. The feature of suggested system of assessment is that it is based on principles of matching and grouping of quality indicators of innovative technologies and the characteristics of technological processes. The indicators are assessed from the standpoint of feasibility, technologies competiveness and commercial demand of products. In this paper, we discuss the example of implementing the approach of assessing the quality of the innovative technology of high-tech products such as turbine aircraft engine.

  3. Oak Ridge National Laboratory Technology Logic Diagram. Volume 2, Technology Logic Diagram: Part B, Remedial Action

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1 (Technology Evaluation), Vol. 2 (Technology Logic Diagram), and Vol. 3 (Technology Evaluation Data Sheets). Part A of Vols. 1. and 2 focuses on D&D. Part B of Vols. 1 and 2 focuses on the RA of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TLD, an explanation of the program-specific responsibilities, a review of identified technologies, and the rankings of remedial technologies. Volume 2 (Pts. A, B, and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A, B, and C) contains the TLD data sheets. Remedial action is the focus of Vol. 2, Pt. B, which has been divided into the three necessary subelements of the RA: characterization, RA, and robotics and automation. Each of these sections address general ORNL problems, which are then broken down by problem area/constituents and linked to potential remedial technologies. The diagrams also contain summary information about a technology`s status, its science and technology needs, and its implementation needs.

  4. Modelling in Medical Technology Assessment

    NARCIS (Netherlands)

    B.C. Michel (Bowine)

    1996-01-01

    textabstractHealth care is a rapidly developing field in which new technologies are introduced continuously. Not all new technologies have the same impact however: most represent only small changes in existing technologies, whereas only a few - like organ transplants - really are revolutionary new d

  5. Liquefaction technology assessment. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1979-05-01

    A survey of coal liquefaction technology and analysis of projected relative performance of high potential candidates has been completed and the results are reported here. The key objectives of the study included preparation of a broad survey of the status of liquefaction processes under development, selection of a limited number of high potential process candidates for further study, and an analysis of the relative commercial potential of these candidates. Procedures which contributed to the achievement of the above key goals included definition of the characteristics and development status of known major liquefaction process candidates, development of standardized procedures for assessing technical, environmental, economic and product characteristics for the separate candidates, and development of procedures for selecting and comparing high potential processes. The comparisons were made for three production areas and four marketing areas of the US. In view of the broad scope of the objectives the survey was a limited effort. It used the experience gained during preparation of seven comprehensive conceptual designs/economic evaluations plus comprehensive reviews of the designs, construction and operation of several pilot plants. Results and conclusions must be viewed in the perspective of the information available, how this information was treated, and the full context of the economic comparison results. Comparative economics are presented as ratios; they are not intended to be predictors of absolute values. Because the true cost of constructing and operating large coal conversion facilities will be known only after commercialization, relative values are considered more appropriate. (LTN)

  6. Social Shaping in Danish Technology Assessment

    DEFF Research Database (Denmark)

    Hansen, Anne Grethe; Clausen, Christian

    2003-01-01

    for technology policy initiatives at the beginning of the new millennium, as prerequisites for socially feasible and desirable technology development and innovation. On the basis of the Danish technology assessments of the 1980s, it is argued that technology assessments and the social shaping perspectives...... in these projects contributed to new insights into the processes of technological change and thus to policy formulation. The social shaping perspective and technology assessment experiences are suggested as important guides to future technology strategies.......The term ‘social shaping of technology’ has been used broadly as a response to techno-economic deterministic understandings of the relations between technology and society. Social shaping has brought together analysts from different backgrounds who share a common interest in the role of social...

  7. Establishment of Health Technology Assessment in Iran

    Directory of Open Access Journals (Sweden)

    Shila Doaee

    2012-06-01

    Full Text Available Objective: Health Technology Assessment (HTA aims at informing healthcare policymakers, managers and practitioners of the "clinical consequences, but also the economic, ethical, and other social implications of the diffusion and use of a specific procedure or technique on medical practice". So considering the policy-oriented nature of HTA that calls for a close integration into the functioning and governance of health systems the present study focuses on executive processes and function of the HTA office of Iran.Materials and methods: Data of this review study were collected through documented sources and observations from 2007 to 2010.Results: Health Technology Assessment began its activities as a secretariat in the Deputy of Health in 2007 and it continues as a Health Technology Assessment Office at the Management of Health Technology Assessment, Standardization, and Tariff at the Deputy of curative affairs of MOHME in the beginning of 2010.14 Technology of modern medical equipment and 8 pharmaceutical medicine are assessed, Now many of measures for HTA establishment  such as cooperation National Institute of Health Research (NIHR, Holding scientific committee meetings, Establishing  the  Master's degree of  health technology assessment ,Building capacities for health technology assessment through education in major universities of the country.Conclusion: pay attention to health technology assessment, selection and application of proper technologies in the frameworks of policy-making and managerial strategies and make efforts to develop it with the support of the governmental in Iran is necessary.

  8. Environmental Assessment of Products, Volume 2

    DEFF Research Database (Denmark)

    Hauschild, Michael Zwicky; Wenzel, Henrik

    Reviews the scientific background for the impact assessment phase of the EDIP methodology for life cycle assessment (LCA) covering the impact categories: Global warming, stratospheric ozone depletion, photochemical ozone formation, acidification, nutrient enrichment, ecotoxicity, human toxicity...

  9. ASSESSMENT OF GALLIUM OXIDE TECHNOLOGY

    Science.gov (United States)

    2017-08-01

    Universe" ...................................... 5 Figure 4: MEA Architecture [60...weight. Figure 4: MEA Architecture [60] 2.2 How Does Ga2O3 Compare to Other Semiconductors? We are paying attention to β-Ga2O3 because of its...growth is possible. • Limited crystal orientation have been demonstrated. • Technology base is narrowly located in Japan . Mainstream technology

  10. Technology for Online Portfolio Assessment Programs

    Science.gov (United States)

    Ferrara, Victoria M.

    2010-01-01

    Portfolio assessment is a valid and reliable method to assess experiential learning. Developing a fully online portfolio assessment program is neither easy nor inexpensive. The institution seeking to take its portfolio assessment program online must make a commitment to its students by offering the technologies most suited to meet students' needs.…

  11. Technology transfer package on seismic base isolation - Volume II

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-02-14

    This Technology Transfer Package provides some detailed information for the U.S. Department of Energy (DOE) and its contractors about seismic base isolation. Intended users of this three-volume package are DOE Design and Safety Engineers as well as DOE Facility Managers who are responsible for reducing the effects of natural phenomena hazards (NPH), specifically earthquakes, on their facilities. The package was developed as part of DOE's efforts to study and implement techniques for protecting lives and property from the effects of natural phenomena and to support the International Decade for Natural Disaster Reduction. Volume II contains the proceedings for the Short Course on Seismic Base Isolation held in Berkeley, California, August 10-14, 1992.

  12. Technology transfer package on seismic base isolation - Volume I

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-02-14

    This Technology Transfer Package provides some detailed information for the U.S. Department of Energy (DOE) and its contractors about seismic base isolation. Intended users of this three-volume package are DOE Design and Safety Engineers as well as DOE Facility Managers who are responsible for reducing the effects of natural phenomena hazards (NPH), specifically earthquakes, on their facilities. The package was developed as part of DOE's efforts to study and implement techniques for protecting lives and property from the effects of natural phenomena and to support the International Decade for Natural Disaster Reduction. Volume I contains the proceedings of the Workshop on Seismic Base Isolation for Department of Energy Facilities held in Marina Del Rey, California, May 13-15, 1992.

  13. ASSESSMENT OF QUALITY OF INNOVATIVE TECHNOLOGIES

    OpenAIRE

    Larisa Alexejevna Ismagilova; Nadegda Aleksandrovna Sukhova

    2016-01-01

    We consider the topical issue of implementation of innovative technologies in the aircraft engine building industry. In this industry, products with high reliability requirements are developed and mass-produced. These products combine the latest achievements of science and technology. To make a decision on implementation of innovative technologies, a comprehensive assessment is carried out. It affects the efficiency of the innovations realization. In connection with this, the assessment of qu...

  14. Technology Directions for the 21st Century, volume 1

    Science.gov (United States)

    Crimi, Giles F.; Verheggen, Henry; McIntosh, William; Botta, Robert

    1996-01-01

    For several decades, semiconductor device density and performance have been doubling about every 18 months (Moore's Law). With present photolithography techniques, this rate can continue for only about another 10 years. Continued improvement will need to rely on newer technologies. Transition from the current micron range for transistor size to the nanometer range will permit Moore's Law to operate well beyond 10 years. The technologies that will enable this extension include: single-electron transistors; quantum well devices; spin transistors; and nanotechnology and molecular engineering. Continuation of Moore's Law will rely on huge capital investments for manufacture as well as on new technologies. Much will depend on the fortunes of Intel, the premier chip manufacturer, which, in turn, depend on the development of mass-market applications and volume sales for chips of higher and higher density. The technology drivers are seen by different forecasters to include video/multimedia applications, digital signal processing, and business automation. Moore's Law will affect NASA in the areas of communications and space technology by reducing size and power requirements for data processing and data fusion functions to be performed onboard spacecraft. In addition, NASA will have the opportunity to be a pioneering contributor to nanotechnology research without incurring huge expenses.

  15. Life Cycle Assessment of Slurry Management Technologies

    DEFF Research Database (Denmark)

    Wesnæs, Marianne; Wenzel, Henrik; Petersen, Bjørn Molt

    This report contains the results of Life Cycle Assessments of two slurry management technologies - acidification and decentred incineration. The LCA foundation can be used by the contributing companies for evaluating the environmental sustainability of a specific technology from a holistic Life...... Cycle perspective. Through this the companies can evaluate the environmental benefits and disadvantages of introducing a specific technology for slurry management. From a societal perspective the results can contribute to a clarification of which slurry management technologies (or combination...

  16. Advanced Thermionic Technology Program: summary report. Volume 4. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1984-10-01

    This report summarizes the progress made by the Advanced Thermionic Technology Program during the past several years. This Program, sponsored by the US Department of Energy, has had as its goal adapting thermionic devices to generate electricity in a terrestrial (i.e., combustion) environment. Volume 4 (Part E) is a highly technical discussion of the attempts made by the Program to push the state-of-the-art beyond the current generation of converters and is directed toward potential researchers engaged in this same task. These technical discussions are complemented with Appendices where appropriate.

  17. Fort Drum integrated resource assessment. Volume 2, Baseline detail

    Energy Technology Data Exchange (ETDEWEB)

    Dixon, D.R.; Armstrong, P.R.; Brodrick, J.R.; Daellenbach, K.K.; Di Massa, F.V.; Keller, J.M.; Richman, E.E.; Sullivan, G.P.; Wahlstrom, R.R.

    1992-12-01

    The US Army Forces Command (FORSCOM) has tasked the Pacific Northwest Laboratory (PNL) as the lead laboratory supporting the US Department of Energy (DOE) Federal Energy Management Program`s mission to identify, evaluate, and assist in acquiring all cost-effective energy projects at Fort Drum. This is a model program PNL is designing for federal customers served by the Niagara Mohawk Power Company. It will identify and evaluate all electric and fossil fuel cost-effective energy projects; develop a schedule at each installation for project acquisition considering project type, size, timing, and capital requirements, as well as energy and dollar savings; and secure 100% of the financing required to implement electric energy efficiency projects from Niagara Mohawk and have Niagara Mohawk procure the necessary contractors to perform detailed audits and install the technologies. This report documents the assessment of baseline energy use at one of Niagara Mohawk`s primary federal facilities, the FORSCOM Fort Drum facility located near Watertown, New York. It is a companion report to Volume 1, the Executive Summary, and Volume 3, the Resource Assessment. This analysis examines the characteristics of electric, gas, oil, propane, coal, and purchased thermal capacity use for fiscal year (FY) 1990. It records energy-use intensities for the facilities at Fort Drum by building type and energy end use. It also breaks down building energy consumption by fuel type, energy end use, and building type. A complete energy consumption reconciliation is presented that includes the accounting of all energy use among buildings, utilities, central systems, and applicable losses.

  18. Emerging Communication Technologies (ECT) Phase 2 Report. Volume 3; Ultra Wideband (UWB) Technology

    Science.gov (United States)

    Bastin, Gary L.; Harris, William G.; Chiodini, Robert; Nelson, Richard A.; Huang, PoTien; Kruhm, David A.

    2003-01-01

    The Emerging Communication Technology (ECT) project investigated three First Mile communication technologies in support of NASA s Second Generation Reusable Launch Vehicle (2nd Gen RLV), Orbital Space Plane, Advanced Range Technology Working Group (ARTWG) and the Advanced Spaceport Technology Working Group (ASTWG). These First Mile technologies have the purpose of interconnecting mobile users with existing Range Communication infrastructures. ECT was a continuation of the Range Information System Management (RISM) task started in 2002. RISM identified the three advance communication technologies investigated under ECT. These were Wireless Ethernet (Wi-Fi), Free Space Optics (FSO), and Ultra Wideband (UWB). Due to the report s size, it has been broken into three volumes: 1) Main Report 2) Appendices 3) UWB

  19. An Independent Scientific Assessment of Well Stimulation in California Volume I

    Energy Technology Data Exchange (ETDEWEB)

    Long, Jane C.S. [California Council on Science and Technology, Sacramento, CA (United States); Feinstein, Laura C. [California Council on Science and Technology, Sacramento, CA (United States); Birkholzer, Jens [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Jordan, Preston [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Houseworth, James [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Dobson, Patrick F. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Heberger, Matthew [Pacific Inst., Oakland, CA (United States); Gautier, Donald L. [Dr. Donald Dautier, LLC., Palo Alto, CA (United States)

    2015-01-01

    In 2013, the California Legislature passed Senate Bill 4 (SB 4), setting the framework for regulation of well stimulation technologies in California, including hydraulic fracturing. SB 4 also requires the California Natural Resources Agency to conduct an independent scientific study of well stimulation technologies in California to assess current and potential future practices, including the likelihood that well stimulation technologies could enable extensive new petroleum production in the state, evaluate the impacts of well stimulation technologies and the gaps in data that preclude this understanding, identify risks associated with current practices, and identify alternative practices which might limit these risks. The study is issued in three volumes. This document, Volume I, provides the factual basis describing well stimulation technologies, how and where operators deploy these technologies for oil and gas production in California, and where they might enable production in the future. Volume II discusses how well stimulation affects water, the atmosphere, seismic activity, wildlife and vegetation, traffic, light and noise levels; it will also explore human health hazards, and identify data gaps and alternative practices. Volume III presents case studies to assess environmental issues and qualitative

  20. DEFTEST. Defence Technological and Scientific Thesaurus. Volume 2. M - Z

    Science.gov (United States)

    1988-05-01

    aoo soNO II DRS - SP- 1 (VOL 2) AR- 005 -466 DEFTEST DEFENCE TECHNOLOGICAL AND SCIENTIFIC THESAURUS Volume 2 M-Z 1988 Edition Defence Reports...dim =1.Waf ON Sealoves Offi anwONid mu. Cho ONSMWO Pliqdu INUMMONma~ei ON-lf NT. A" am .NKS emb Co di wf Jet ofl bUSSI nm md Oi e Midib mdi Fade...fa ii IFT N~m adds Pawnrum OtaMl orgaic add CrOMI adds uorm TaY1ears"ls "Takd ugin Serb Tod ca i iPolBaine o lchmif NT n I -~ Sdenm and Technolog Oro

  1. Environmental Assessment of Products, Volume 1

    DEFF Research Database (Denmark)

    Wenzel, Henrik; Hauschild, Michael Zwicky; Alting, Leo

    A detailed introduction to the EDIP (Environmental Design of Industrial Products, Danish acronym: UMIP) methodology on life cycle assessment (LCA) including toolbox, introduction to the use of LCA in product development and five comprehensive case studies on electromechanical products.......A detailed introduction to the EDIP (Environmental Design of Industrial Products, Danish acronym: UMIP) methodology on life cycle assessment (LCA) including toolbox, introduction to the use of LCA in product development and five comprehensive case studies on electromechanical products....

  2. Health Monitoring System Technology Assessments: Cost Benefits Analysis

    Science.gov (United States)

    Kent, Renee M.; Murphy, Dennis A.

    2000-01-01

    The subject of sensor-based structural health monitoring is very diverse and encompasses a wide range of activities including initiatives and innovations involving the development of advanced sensor, signal processing, data analysis, and actuation and control technologies. In addition, it embraces the consideration of the availability of low-cost, high-quality contributing technologies, computational utilities, and hardware and software resources that enable the operational realization of robust health monitoring technologies. This report presents a detailed analysis of the cost benefit and other logistics and operational considerations associated with the implementation and utilization of sensor-based technologies for use in aerospace structure health monitoring. The scope of this volume is to assess the economic impact, from an end-user perspective, implementation health monitoring technologies on three structures. It specifically focuses on evaluating the impact on maintaining and supporting these structures with and without health monitoring capability.

  3. Civil Engineering Technology Needs Assessment.

    Science.gov (United States)

    Oakland Community Coll., Farmington, MI. Office of Institutional Planning and Analysis.

    In 1991, a study was conducted by Oakland Community College (OCC) to evaluate the need for a proposed Civil Engineering Technology program. An initial examination of the literature focused on industry needs and the job market for civil engineering technicians. In order to gather information on local area employers' hiring practices and needs, a…

  4. Knowledge in health technology assessment

    DEFF Research Database (Denmark)

    Tjørnhøj-Thomsen, Tine; Hansen, Helle Ploug

    2011-01-01

    to generate knowledge and evidence about the patient aspects of a given technology. This raises questions about how knowledge is produced in HTA reports and what kind of knowledge is considered relevant. This article uses a Danish HTA on patient education from 2009 as empirical material for a critical...... examination and discussion of knowledge and knowledge production about the patient aspects of HTA....

  5. Wireless technology for ABC Assessment

    DEFF Research Database (Denmark)

    Kristensen, Margit; Kyng, Morten; Christensen, Erika Frischknecht;

      In medical emergency service (EMS) the ABC status (Airway-Breathing-Circulation) of victims is essential in the decision making process regarding prioritizing and treatment. Today's use of information technology does, however, not inform directly about "A" and "B". The parameters are evaluated ...

  6. Technologies Assessing Limb Bradykinesia in Parkinson's Disease.

    Science.gov (United States)

    Hasan, Hasan; Athauda, Dilan S; Foltynie, Thomas; Noyce, Alastair J

    2017-01-01

    The MDS-UPDRS (Movement Disorders Society - Unified Parkinson's Disease Rating Scale) is the most widely used scale for rating impairment in PD. Subscores measuring bradykinesia have low reliability that can be subject to rater variability. Novel technological tools can be used to overcome such issues. To systematically explore and describe the available technologies for measuring limb bradykinesia in PD that were published between 2006 and 2016. A systematic literature search using PubMed (MEDLINE), IEEE Xplore, Web of Science, Scopus and Engineering Village (Compendex and Inspec) databases was performed to identify relevant technologies published until 18 October 2016. 47 technologies assessing bradykinesia in PD were identified, 17 of which offered home and clinic-based assessment whilst 30 provided clinic-based assessment only. Of the eligible studies, 7 were validated in a PD patient population only, whilst 40 were tested in both PD and healthy control groups. 19 of the 47 technologies assessed bradykinesia only, whereas 28 assessed other parkinsonian features as well. 33 technologies have been described in additional PD-related studies, whereas 14 are not known to have been tested beyond the pilot phase. Technology based tools offer advantages including objective motor assessment and home monitoring of symptoms, and can be used to assess response to intervention in clinical trials or routine care. This review provides an up-to-date repository and synthesis of the current literature regarding technology used for assessing limb bradykinesia in PD. The review also discusses the current trends with regards to technology and discusses future directions in development.

  7. Y-12 Plant remedial action Technology Logic Diagram: Volume 3, Technology evaluation data sheets: Part A, Remedial action

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    The Y-12 Plant Remedial Action Technology Logic Diagram (TLD) was developed to provide a decision-support tool that relates environmental restoration (ER) problems at the Y-12 Plant to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed for sufficient development of these technologies to allow for technology transfer and application to remedial action (RA) activities. The TLD consists of three volumes. Volume 1 contains an overview of the TLD, an explanation of the program-specific responsibilities, a review of identified technologies, and the rankings of remedial technologies. Volume 2 contains the logic linkages among environmental management goals, environmental problems and the various technologies that have the potential to solve these problems. Volume 3 contains the TLD data sheets. This report is Part A of Volume 3 and contains the Remedial Action section.

  8. Y-12 Plant remedial action Technology Logic Diagram: Volume 3, Technology evaluation data sheets: Part B, Characterization; robotics/automation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    The Y-12 Plant Remedial Action Technology Logic Diagram (TLD) was developed to provide a decision-support tool that relates environmental restoration (ER) problems at the Y-12 Plant to potential technologies that can remediate theses problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed for sufficient development of these technologies to allow for technology transfer and application to remedial action (RA) activities. The TLD consists of three volumes. Volume 1 contains an overview of the TLD, an explanation of the program-specific responsibilities, a review of identified technologies, and the rankings of remedial technologies. Volume 2 contains the logic linkages among environmental management goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 contains the TLD data sheets. This report is Part B of Volume 3 and contains the Characterization and Robotics/Automation sections.

  9. Carbon Capture: A Technology Assessment

    Science.gov (United States)

    2013-10-21

    time. The absence of a significant market for the novel technologies put them at a further disadvantage . This is similar to the situation for CO2...the overall CCS process applied to a power plant or other industrial process. The CO2 produced from carbon in the fossil fuels or biomass feedstock...Air or Oxygen Fossil Fuels; Biomass USEFUL PRODUCTS (e.g., electricity, fuels, chemicals, hydrogen) CO2 CO2 Capture & Compress CO2 Transport CO2

  10. Assessing medical technologies in development; a new paradigm of medical technology assessment

    NARCIS (Netherlands)

    Hummel, J. Marjan; van Rossum, Wouter; Verkerke, Gijsbertus Jacob; Rakhorst, Gerhard

    2000-01-01

    Objective: Our study aims to provide a practical contribution to the field of medical technology assessment within a new paradigm. This paradigm indicates the need for more comprehensive technology assessments in the development stage of a new technology. - Method: We introduce a method, based on

  11. Assessing medical technologies in development - A new paradigm of medical technology assessment

    NARCIS (Netherlands)

    Hummel, MJM; van Rossum, W; Verkerke, GJ; Rakhorst, G

    2000-01-01

    Objective: Our study aims to provide a practical contribution to the field of medical technology assessment within a new paradigm. This paradigm indicates the need for more comprehensive technology assessments in the development stage of a new technology. Method: We introduce a method, based on Saat

  12. Automatization of Student Assessment Using Multimedia Technology.

    Science.gov (United States)

    Taniar, David; Rahayu, Wenny

    Most use of multimedia technology in teaching and learning to date has emphasized the teaching aspect only. An application of multimedia in examinations has been neglected. This paper addresses how multimedia technology can be applied to the automatization of assessment, by proposing a prototype of a multimedia question bank, which is able to…

  13. On Quality Assessment of Learning Technology Specifications

    NARCIS (Netherlands)

    Janssen, José; Berlanga, Adriana; Koper, Rob

    2012-01-01

    Janssen, J., Berlanga, A. J., & Koper, R. (2012). On Quality Assessment of Learning Technology Specifications. In J. C. Ramalho, A. Simões, & R. Queirós (Eds.). Innovations in XML Applications and Metadata Management: Advancing Technologies (pp. 78-95). Hershey, PA, USA: IGI Global. Below file

  14. A Suite of Tools for Technology Assessment

    Science.gov (United States)

    2007-09-01

    Saden, Povinelli & Rosen, 1989). • This was a significant change in emphasis on the part of NASA, where technology had previously viewed as merely...Cost Analysis Symposium, April 13, 2005. A Suite of Tools for Technology Assessment 24 Bibliography - continued: • Sadin, Stanley T.; Povinelli

  15. The internationalization of health technology assessment.

    Science.gov (United States)

    Menon, D; Marshall, D

    1996-01-01

    Health technology assessment as a formalized set of activities has a relatively short history. At its current stage of development, it is clear that it has global dimensions and impact. In this paper we review the history of health technology assessment, its development as a form of health services research, and its "institutionalization." We then identify the reasons for its internationalization, review current international initiatives, and propose actions to be taken to improve cooperation among countries.

  16. Health technology assessment. Evaluation of biomedical innovative technologies.

    Science.gov (United States)

    Turchetti, Giuseppe; Spadoni, Enza; Geisler, Eliezer Elie

    2010-01-01

    This article describes health technology assessment (HTA) as an evaluation tool that applies systematic methods of inquiry to the generation and use of health technologies and new products. The focus of this article is on the contributions of HTA to the management of the new product development effort in the biomedical organization. Critical success factors (CSFs) are listed, and their role in assessing success is defined and explained. One of the conclusions of this article is that HTA is a powerful tool for managers in the biomedical sector, allowing them to better manage their innovation effort in their continuing struggle for competitiveness and survival.

  17. The social function of technology assessment

    Science.gov (United States)

    Huddle, F. P.

    1972-01-01

    The problem of preserving the uneasy balance between a dynamic society and the equilibrium of man-environment society is discussed. Four sets of activities involved in technology assessment are considered: (1) Technology forecasting is necessary to warn of future dangers and opportunities, for effective timing, and to identify tradeoffs and alternatives. But forecasting is also chancy at best. (2) Social indicators need to be developed for the characterization of social status and measurement of social progress, as well as a better understanding of social needs. (3) With respect to technology assessment, the conflict between profitable directions of innovations and socially desirable directions is described, and a systematic way is needed to determine in advance what is technologically feasible to meet social needs. (4) National goals with respect to scientific and technological developments are also required.

  18. Too many cooks batter technology assessment.

    Science.gov (United States)

    Wagner, M

    1991-12-02

    The bustling activity and interest in technology assessment obscures two growing problems. More than 70 groups, sporting a variety of agendas, are involved in assessing new devices, drugs and procedures; variations in the information they seek or the methods they use sometimes produce findings that conflict or can't be compared.

  19. An environmental assessment system for environmental technologies

    DEFF Research Database (Denmark)

    Clavreul, Julie; Baumeister, Hubert; Christensen, Thomas Højlund

    2014-01-01

    A new model for the environmental assessment of environmental technologies, EASETECH, has been developed. The primary aim of EASETECH is to perform life-cycle assessment (LCA) of complex systems handling heterogeneous material flows. The objectives of this paper are to describe the EASETECH...

  20. An environmental assessment system for environmental technologies

    DEFF Research Database (Denmark)

    Clavreul, Julie; Baumeister, Hubert; Christensen, Thomas Højlund;

    2014-01-01

    A new model for the environmental assessment of environmental technologies, EASETECH, has been developed. The primary aim of EASETECH is to perform life-cycle assessment (LCA) of complex systems handling heterogeneous material flows. The objectives of this paper are to describe the EASETECH...

  1. Assessment and Learning Technologies: An Overview

    Science.gov (United States)

    Farrell, Treasa; Rushby, Nick

    2016-01-01

    Assessment pervades the learning process. This paper provides an overview of the application of technology to support and enhance diagnostic, formative and summative assessment. The focus is on examining how it can replace what already exists, improve the functionality, catalyse a redesign of the process and in some circumstances, make possible…

  2. Spent Nuclear Fuel Alternative Technology Risk Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Perella, V.F.

    1999-11-29

    A Research Reactor Spent Nuclear Fuel Task Team (RRTT) was chartered by the Department of Energy (DOE) Office of Spent Fuel Management with the responsibility to recommend a course of action leading to a final technology selection for the interim management and ultimate disposition of the foreign and domestic aluminum-based research reactor spent nuclear fuel (SNF) under DOE''s jurisdiction. The RRTT evaluated eleven potential SNF management technologies and recommended that two technologies, direct co-disposal and an isotopic dilution alternative, either press and dilute or melt and dilute, be developed in parallel. Based upon that recommendation, the Westinghouse Savannah River Company (WSRC) organized the SNF Alternative Technology Program to further develop the direct co-disposal and melt and dilute technologies and provide a WSRC recommendation to DOE for a preferred SNF alternative management technology. A technology risk assessment was conducted as a first step in this recommendation process to determine if either, or both, of the technologies posed significant risks that would make them unsuitable for further development. This report provides the results of that technology risk assessment.

  3. Oak Ridge K-25 Site Technology Logic Diagram. Volume 3, Technology evaluation data sheets; Part A, Characterization, decontamination, dismantlement

    Energy Technology Data Exchange (ETDEWEB)

    Fellows, R.L. [ed.

    1993-02-26

    The Oak Ridge K-25 Technology Logic Diagram (TLD), a decision support tool for the K-25 Site, was developed to provide a planning document that relates environmental restoration and waste management problems at the Oak Ridge K-25 Site to potential technologies that can remediate these problems. The TLD technique identifies the research necessary to develop these technologies to a state that allows for technology transfer and application to waste management, remedial action, and decontamination and decommissioning activities. The TLD consists of four separate volumes-Vol. 1, Vol. 2, Vol. 3A, and Vol. 3B. Volume 1 provides introductory and overview information about the TLD. Volume 2 contains logic diagrams. Volume 3 has been divided into two separate volumes to facilitate handling and use. This report is part A of Volume 3 concerning characterization, decontamination, and dismantlement.

  4. US long distance fiber optic networks: Technology, evolution and advanced concepts. Volume 1: Executive summary

    Science.gov (United States)

    1986-01-01

    Over the past two decades, fiber optics has emerged as a highly practical and cost-efficient communications technology. Its competitiveness vis-a-vis other transmission media, especially satellite, has become a critical question. This report studies the likely evolution and application of fiber optic networks in the United States to the end of the century. The outlook for the technology of fiber systems is assessed and forecast, scenarios of the evolution of fiber optic network development are constructed, and costs to provide service are determined and examined parametrically as a function of network size and traffic carried. Volume 1 consists of the Executive Summary. Volume 2 focuses on fiber optic technology and long distance fiber optic networks. Volume 3 develops a traffic and financial model of a nationwide long distance transmission network. Among the study's most important conclusions are: revenue requirements per circuit for LATA-to-LATA fiber optic links are less than one cent per call minute; multiplex equipment, which is likely to be required in any competing system, is the largest contributor to circuit costs; the potential capacity of fiber optic cable is very large and as yet undefined; and fiber optic transmission combined with other network optimization schemes can lead to even lower costs than those identified in this study.

  5. Health technology assessment and thyroid surgery.

    Science.gov (United States)

    Lucchini, R; Sanguinetti, A; Monacelli, M; Triola, R; Avenia, S; Conti, C; Santoprete, S; Avenia, N

    2013-01-01

    The growth of technological innovation, the request for assistance, the rising patient's expectations and the interest of the industry have led to a rise in the cost of health care systems. In this context the role of the National Health System is not to delay the development or adoption of new technologies, but rather to drive the development selecting priorities and promoting its use. Health Technology Assessment (HTA) is a multidisciplinary and multidimensional approach for analyzing the medical-clinical, social, organizational, economic, ethical and legal implications of a technology (devices, drugs, procedures) through the assessment of multiple parameters such as effectiveness, safety, costs of the social and organizational impact. A health technology assessment is a comprehensive, systematic evaluation of the prerequisites for estimating the consequences of using health technology. Main characteristic of HTA is that the problem is tackled using an approach focused on four main elements: - technology; - patient; - organization; - economy. The authors have applied the HTA method for the analysis of the ultrasonic focus dissector on thyroid surgery. They compared the cost of the surgical procedure using the ultrasonic dissector and without it in a case study of 440 patients who underwent thyroidectomy.

  6. Health Technology Assessment and patient safety

    Directory of Open Access Journals (Sweden)

    Andrew Mulcahy

    2005-12-01

    Full Text Available

    Health Technology Assessment (HTA is a process used to evaluate the clinical effectiveness and costeffectiveness of health technologies by a systematic review of clinical, economic, and utilization research.

    Despite widespread investment in patient safety technologies in the U.K., U.S., and elsewhere, little HTA has been done to establish the clinical or cost-effectiveness of these technologies. The HTA and patient safety literature suggests there are four categories of patient safety HTA, including HTA for existing safety technologies, underutilized safety technologies, emerging safety technologies, as well as safety aspects of technologies with a non-safety primary purpose.

    Recent HTA and other research, including a 2002 evidencebased evaluation of patient safety technologies from the U.S. Agency for Health Research and Quality, provide an important foundation for a more comprehensive approach to patient safety HTA. However, HTA programs must address prioritization, methodology, and dissemination challenges introduced by patient safety technologies before significant progress can Te made.

  7. Assessment of the breast volume by a new simple formula

    Directory of Open Access Journals (Sweden)

    El-Oteify Mahmoud

    2006-01-01

    Full Text Available Background: With the recent introduction of improved techniques for plastic surgery of the breast and increased public awareness toward these procedures, plastic surgeons are continuously trying to improve their methods and results to reach perfection. Assessment of the breast volume is an important issue prior to the use of breast implants in any aesthetic or reconstructive breast surgery. Previous methods to measure breast volume have included use of a simple bra and breast cup size, cumbersome fluid displacement, appliances and approximate visual estimation. Objectives: In this work we have tried to develop an easy method for assessment of the breast volume for both the patient and the the surgeon through a simple mathematical formula. Materials and Methods: Fifty two volunteers were included in this study. For every one, general parameters including age, weight and height were recorded. Local breast measurements and water volume displacement were also recorded. Results: The collected data were statistically correlated. Using the analyzed data, the breast volume was calculated through a simple and direct formula on the basis of the breast circumference. Conclusion: Our method has, as its principle, the use of an accurate and simple formula, which is based only on one measurement. This is easy for both the patient and the plastic surgeon. This equation is not only a significant technical advantage for the surgeon, but also provides a universal standardization of the breast volume.

  8. Fifth DOE symposium on enhanced oil and gas recovery and improved drilling technology. Volume 2. Oil

    Energy Technology Data Exchange (ETDEWEB)

    Linville, B. [ed.

    1979-01-01

    Volume 2 contains papers from the following sessions: residual oil determination; thermal methods; heavy oil-tar sands; technology transfer; and carbon dioxide flooding. Individual papers were processed.

  9. Technology and economic assessment of lactic acid production and uses

    Energy Technology Data Exchange (ETDEWEB)

    Datta, R.; Tsai, S.P.

    1996-03-01

    Lactic acid has been an intermediate-volume specialty chemical (world production {approximately}50,000 tons/yr) used in a wide range of food-processing and industrial applications. Potentially, it can become a very large-volume, commodity-chemical intermediate produced from carbohydrates for feedstocks of biodegradable polymers, oxygenated chemicals, environmentally friendly ``green`` solvents, and other intermediates. In the past, efficient and economical technologies for the recovery and purification of lactic acid from fermentation broths and its conversion to the chemical or polymer intermediates had been the key technology impediments and main process cost centers. Development and deployment of novel separations technologies, such as electrodialysis with bipolar membranes, extractive and catalytic distillations, and chemical conversion, can enable low-cost production with continuous processes in large-scale operations. The emerging technologies can use environmentally sound lactic acid processes to produce environmentally useful products, with attractive process economics. These technology advances and recent product and process commercialization strategies are reviewed and assessed.

  10. Independent Assessment of Technology Characterizations to Support the Biomass Program Annual State-of-Technology Assessments

    Energy Technology Data Exchange (ETDEWEB)

    Yeh, B.

    2011-03-01

    This report discusses an investigation that addressed two thermochemical conversion pathways for the production of liquid fuels and addressed the steps to the process, the technology providers, a method for determining the state of technology and a tool to continuously assess the state of technology. This report summarizes the findings of the investigation as well as recommendations for improvements for future studies.

  11. Assessment of accident risks in the CRBRP. Volume 2. Appendices

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-03-01

    Appendices to Volume I include core-related accident-sequence definition, CRBRP risk-assessment sequence-probability determinations, failure-probability data, accident scenario evaluation, radioactive material release analysis, ex-core accident analysis, safety philosophy and design features, calculation of reactor accident consequences, sensitivity study, and risk from fires.

  12. Hazardous Waste Land Disposal Facility Assessment. Volume 1

    Science.gov (United States)

    1988-09-01

    Facilities ( DALF ) at RVA" (USATHANA, 1984) provided the basis for the volume estimates for siting a disposal facility as discussed in Appendix 1.3. The... DALF also addressed on-site disposal options in addition to other technologies. This study supported the on-site disposal option by stating that a...impermeable bedrock do not exist at RMA. The DALF , drawing on the conclusions of the earlier WES 1983 report, recoumended a site in the northeast quarter of

  13. Conventional engine technology. Volume 3: Comparisons and future potential

    Science.gov (United States)

    Dowdy, M. W.

    1981-01-01

    The status of five conventional automobile engine technologies was assessed and the future potential for increasing fuel economy and reducing exhaust emission was discussed, using the 1980 EPA California emisions standards as a comparative basis. By 1986, the fuel economy of a uniform charge Otto engine with a three-way catalyst is expected to increase 10%, while vehicles with lean burn (fast burn) engines should show a 20% fuel economy increase. Although vehicles with stratified-charge engines and rotary engines are expected to improve, their fuel economy will remain inferior to the other engine types. When adequate NO emissions control methods are implemented to meet the EPA requirements, vehicles with prechamber diesel engines are expected to yield a fuel economy advantage of about 15%. While successful introduction of direct injection diesel engine technology will provide a fuel savings of 30 to 35%, the planned regulation of exhaust particulates could seriously hinder this technology, because it is expected that only the smallest diesel engine vehicles could meet the proposed particulate requirements.

  14. Status and assessment of photovoltaic technologies

    Science.gov (United States)

    Kazmerski, L. L.

    The history and status of the current photovoltaic technologies are reviewed and evaluated. The problems and strengths of single-crystal, polycrystalline, and amorphous technologies are discussed, compared, and assessed. Single-junction and multiple-junction or tandem cell configurations are evaluated for performance, processing, and engineering criteria. Some emphasis is placed on the emerging thin film options for low cost terrestrial applications. The basic photovoltaic system building block, the solar cell, is discussed along with important module developments and problems. Future technology and research directions are provided for materials, cells, and modules.

  15. Status and assessment of photovoltaic technologies

    Energy Technology Data Exchange (ETDEWEB)

    Kazmerski, L.L. (Solar Energy Research Inst., Golden, CO (USA))

    1989-01-01

    The history and status of the current photovoltaic technologies are reviewed and evaluated. The problems and strengths of single-crystal, polycrystalline, and amorphous technologies are discussed, compared and assessed. Single-junction and multiple-junction or tandem cell configurations are evaluated for performance, processing, and engineering criteria. Some emphasis is placed on the emerging thin film options for low cost terrestrial applications. Discussions centre around the basic photovoltaic system building block, the solar cell, but important module developments and problems are cited. Future technology and research directions are provided for materials, cells, and modules. (author).

  16. Assessment of Wearable Sensor Technologies for Biosurveillance

    Science.gov (United States)

    2014-11-01

    intelligence (AI) and biometric data, the device captures electrodermal activity in real time to assess emotional states. Using the technique of...Biometric smartwear Hexoskin Breathing rate, volume, cadence, ECG, sleep position, heart rate, and other physiological data Wearable Wellnes...watches. Google Fit’s fitness tracking will display data such as heart rate, or detect whether its wearer has been physically active . Google’s

  17. Evidence review of technology and dietary assessment.

    Science.gov (United States)

    Long, JoAnn D; Littlefield, Laurel A; Estep, Gary; Martin, Hope; Rogers, Toby J; Boswell, Carol; Shriver, Brent J; Roman-Shriver, Carmen R

    2010-12-01

    Diets high in fruit and vegetable consumption are associated with a decrease in chronic diseases. Dietary factors are linked to 4 of the 10 leading noncommunicable causes of death: cardiovascular disease, some cancers, stroke, and type 2 diabetes. Accurately measuring dietary patterns has many challenges. Dietary intake measurement has traditionally relied on self-report instruments such as 24-hour recall, food record, and food frequency questionnaires to record consumption history. These methods have inherent limitations in detecting small but important changes in fruit and vegetable consumption patterns. Promising advances in technology have made more sophisticated techniques for recording dietary intake possible. Computers and Web-based programs, handheld personal digital assistants with cameras and telephone cards, smart phones, cameras, and video recorders options may reduce the burden of recording what has been consumed. Furthermore, technology-based methods of dietary assessment may provide a higher degree of reliability and validity in visually determining fruit and vegetable consumption, and additional study is warranted. The purpose of this article is to present a review of the evidence on the effectiveness of technology-based methods for dietary assessment, which included fruit and vegetable consumption. One hundred and eighty-seven articles published between 1998 and 2008 were initially identified. Fifteen met the study inclusion criteria and were evaluated by an interdisciplinary team using the Stetler Strength of Evidence Scale. Six technology-based methods for dietary assessment were identified. Findings from validity and reliability testing of technology-based methods are encouraging and need replication. Clinically important features offered through technology may reduce reporting burden and offer behavioral feedback to users. Methodologically sound, empirical research into using technology-based application for dietary assessment in a variety of

  18. A Health Technology Assessment: laparoscopy versus colpoceliotomy.

    Science.gov (United States)

    Damonti, A; Ferrario, L; Morelli, P; Mussi, M; Patregnani, C; Garagiola, E; Foglia, E; Pagani, R; Carminati, R; Porazzi, E

    2015-01-01

    The objective of this paper is the comparison between two different technologies used for the removal of a uterine myoma, a frequent benign tumor: the standard technology currently used, laparoscopy, and an innovative one, colpoceliotomy. It was considered relevant to evaluate the real and the potential effects of the two technologies implementation and, in addition, the consequences that the introduction or exclusion of the innovative technology would have for both the National Health System (NHS) and the entire community. The comparison between these two different technologies, the standard and the innovative one, was conducted using a Health Technology Assessment (HTA). In particular, in order to analyse their differences, a multi-dimensional approach was considered: effectiveness, costs and budget impact analysis data were collected, applying different instruments, such as the Activity Based Costing methodology (ABC), the Cost-Effectiveness Analysis (CEA) and the Budget Impact Analysis (BIA). Organisational, equity and social impact were also evaluated. The results showed that the introduction of colpoceliotomy would provide significant economic savings to the Regional and National Health Service; in particular, a saving of € 453.27 for each surgical procedure. The introduction of the innovative technology, colpoceliotomy, could be considered a valuable tool; one offering many advantages related to less invasiveness and a shorter surgical procedure than the standard technology currently used (laparoscopy).

  19. Sustainability assessment of advanced wastewater treatment technologies

    DEFF Research Database (Denmark)

    Høibye, Linda; Clauson-Kaas, Jes; Wenzel, Henrik

    2007-01-01

    As a consequence of the EU Water Framwork Directive, more focus is now on discharges of hazardous substances from wastewater treatment plants and sewers. Thus, many municipalities in Denmark may have to adopt to future advenced treatment technologies. This paper describes a holistic assessment...... of sustainability, sand filtration is the most advantageous method based on the technical and environmental assessment due to the low energy consumption and high efficiency with regard to the removal of heavy metals....

  20. Broadband Satellite Technologies and Markets Assessed

    Science.gov (United States)

    Wallett, Thomas M.

    1999-01-01

    The current usage of broadband (data rate greater than 64 kilobits per second (kbs)) for multimedia network computer applications is increasing, and the need for network communications technologies and systems to support this use is also growing. Satellite technology will likely be an important part of the National Information Infrastructure (NII) and the Global Information Infrastructure (GII) in the next decade. Several candidate communications technologies that may be used to carry a portion of the increased data traffic have been reviewed, and estimates of the future demand for satellite capacity have been made. A study was conducted by the NASA Lewis Research Center to assess the satellite addressable markets for broadband applications. This study effort included four specific milestones: (1) assess the changing nature of broadband applications and their usage, (2) assess broadband satellite and terrestrial technologies, (3) estimate the size of the global satellite addressable market from 2000 to 2010, and (4) identify how the impact of future technology developments could increase the utility of satellite-based transport to serve this market.

  1. Interactive Technology Assessment in the Real World

    NARCIS (Netherlands)

    Marris, Claire; Joly, Pierre-Benoit; Rip, Arie

    2008-01-01

    Participatory Technology Assessment (pTA) initiatives have usually been analyzed as if they existed in a social and political vacuum. This article analyzes the linkages that occur, in both directions, between the microcosm set up by a pTA exercise and the real world outside. This dual-dynamics persp

  2. Community Needs Assessment Office Administration & Technology (OAT).

    Science.gov (United States)

    Pezzoli, J. A.; Lum, Ku'uipo; Meyer, Diane

    The purpose of this survey was to obtain from employers the requisite skills and potential employment demand for office workers on Maui. Of particular interest was: (1) the assessment of various clerical skills and computer software in its relevance to the Office Administration & Technology (OAT) curriculum at Maui Community College; and (2)…

  3. Teacher Learning of Technology Enhanced Formative Assessment

    Science.gov (United States)

    Feldman, Allan; Capobianco, Brenda M.

    2008-01-01

    This study examined the integration of technology enhanced formative assessment (FA) into teachers' practice. Participants were high school physics teachers interested in improving their use of a classroom response system (CRS) to promote FA. Data were collected using interviews, direct classroom observations, and collaborative discussions. The…

  4. Interactive technology assessment and wide reflective equilibrium.

    NARCIS (Netherlands)

    Reuzel, R.P.B.; Wilt, G.J. van der; Have, H.A.M.J. ten; Vries Robbé, P.F. de

    2001-01-01

    Interactive technology assessment (iTA) provides an answer to the ethical problem of normative bias in evaluation research. This normative bias develops when relevant perspectives on the evaluand (the thing being evaluated) are neglected. In iTA this bias is overcome by incorporating different persp

  5. An assessment of information communication technology content ...

    African Journals Online (AJOL)

    An assessment of information communication technology content, context and process dimensions in public health facilities in Machakos and Nairobi ... to lack of support from hospital top management team (χ 9.44, d.f.=4 and p=0.005).

  6. Technology and the issues facing nursing assessment.

    Science.gov (United States)

    Ansell, Helen; Meyer, Alannah; Thompson, Shona

    This article describes an investigation into the use of technology and the issues nurses face undertaking nursing assessment. It reports qualitative, descriptive research involving interviews with ten ward nurses from three hospitals in New Zealand. Thematic analysis of the data revealed three key issues: the impact of technology, the influence of early warning systems and nurse autonomy. Results show how clinical decision making around nursing assessment is influenced by technology and the Early Warning Score. These clinical decisions may not always be informed by critical thinking in complex healthcare environments. The article concludes that nurse autonomy, while supported and endorsed in theory, is frequently in conflict with hospital risk-management policies and the use of prescriptive algorithms.

  7. Biomass Gasification Technology Assessment: Consolidated Report

    Energy Technology Data Exchange (ETDEWEB)

    Worley, M.; Yale, J.

    2012-11-01

    Harris Group Inc. (HGI) was commissioned by the National Renewable Energy Laboratory to assess gasification and tar reforming technologies. Specifically, the assessments focused on gasification and tar reforming technologies that are capable of producing a syngas suitable for further treatment and conversion to liquid fuels. HGI gathered sufficient information to analyze three gasification and tar reforming systems. This report summarizes the equipment, general arrangement of the equipment, operating characteristics, and operating severity for each technology. The order of magnitude capital cost estimates are supported by a basis-of-estimate write-up, which is also included in this report. The report also includes Microsoft Excel workbook models, which can be used to design and price the systems. The models can be used to analyze various operating capacities and pressures. Each model produces a material balance, equipment list, capital cost estimate, equipment drawings and preliminary general arrangement drawings. Example outputs of each model are included in the Appendices.

  8. Assessment of Sensor Technologies for Advanced Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Korsah, Kofi [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Ramuhalli, Pradeep [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Vlim, R. [Argonne National Lab. (ANL), Argonne, IL (United States); Kisner, Roger A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Britton, Jr, Charles L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Wootan, D. W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Anheier, Jr, N. C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Diaz, A. A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hirt, E. H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Chien, H. T. [Argonne National Lab. (ANL), Argonne, IL (United States); Sheen, S. [Argonne National Lab. (ANL), Argonne, IL (United States); Bakhtiari, Sasan [Argonne National Lab. (ANL), Argonne, IL (United States); Gopalsami, S. [Argonne National Lab. (ANL), Argonne, IL (United States); Heifetz, A. [Argonne National Lab. (ANL), Argonne, IL (United States); Tam, S. W. [Argonne National Lab. (ANL), Argonne, IL (United States); Park, Y. [Argonne National Lab. (ANL), Argonne, IL (United States); Upadhyaya, B. R. [Univ. of Tennessee, Knoxville, TN (United States); Stanford, A. [Univ. of Tennessee, Knoxville, TN (United States)

    2016-10-01

    Sensors and measurement technologies provide information on processes, support operations and provide indications of component health. They are therefore crucial to plant operations and to commercialization of advanced reactors (AdvRx). This report, developed by a three-laboratory team consisting of Argonne National Laboratory (ANL), Oak Ridge National Laboratory (ORNL) and Pacific Northwest National Laboratory (PNNL), provides an assessment of sensor technologies and a determination of measurement needs for AdvRx. It provides the technical basis for identifying and prioritizing research targets within the instrumentation and control (I&C) Technology Area under the Department of Energy’s (DOE’s) Advanced Reactor Technology (ART) program and contributes to the design and implementation of AdvRx concepts.

  9. Constructive Technology Assessment for HIT development

    DEFF Research Database (Denmark)

    Høstgaard, Anna Marie Balling; Bertelsen, Pernille; Petersen, Lone Stub

    2013-01-01

    Experience and time has shown a need for new evaluation methods for evaluating Health Information Technology (HIT), as summative evaluation methods fail to accommodate the rapid and constant changes in HIT over time and to involve end-users, which has been recognized as an important success factor...... in HIT development. A new evaluation methodology, including an analytical framework, has been developed specifically for HIT development: Constructive Technology Assessment (CTA) for HIT. It offers solutions to both the problems associated with summative technology evaluation and a way to involve end......-users. The CTA methodology is based on a Socio-technical understanding of technological development as an open ended, emergent process. The CTA was used during the EHR development process in the Region of North Jutland where it proved successful inproviding learning and feedback between all relevant groups...

  10. Sustainability assessment of advanced wastewater treatment technologies

    DEFF Research Database (Denmark)

    Høibye, Linda; Clauson-Kaas, Jes; Wenzel, Henrik

    2007-01-01

    , which includes technical, economic and environmental aspects. The technical and economic assessment is performed on 5 advanced treatment technologies: sand filtration, ozone treatment, UV exclusively for disinfection of pathogenic microorganisms, Membrane Bioreactor (MBR), and UV in combination...... and three advanced treatment methods: sand filtration, ozone treatment and MBR. The technical and economic assessment showed that UV solely for disinfection purposes or ozone treatment are the most advantageous advanved treatment methods if the demands are restricted to pathogenic microorganisms. In terms......As a consequence of the EU Water Framwork Directive, more focus is now on discharges of hazardous substances from wastewater treatment plants and sewers. Thus, many municipalities in Denmark may have to adopt to future advenced treatment technologies. This paper describes a holistic assessment...

  11. Sustainability assessment of advanced wastewater treatment technologies.

    Science.gov (United States)

    Høibye, L; Clauson-Kaas, J; Wenzel, H; Larsen, H F; Jacobsen, B N; Dalgaard, O

    2008-01-01

    As a consequence of the EU Water Framework Directive more focus is now on discharges of hazardous substances from wastewater treatment plants and sewers. Thus, many municipalities in Denmark may have to adopt to future advanced treatment technologies. This paper describes a holistic assessment, which includes technical, economical and environmental aspects. The technical and economical assessment is performed on 5 advanced treatment technologies: sand filtration, ozone treatment, UV exclusively for disinfection of pathogenic microorganisms, membrane bioreactor (MBR) and UV in combination with advanced oxidation. The technical assessment is based on 12 hazardous substances comprising heavy metals, organic pollutants, endocrine disruptors as well as pathogenic microorganisms. The environmental assessment is performed by life cycle assessment (LCA) comprising 9 of the specific hazardous substances and three advanced treatment methods; sand filtration, ozone treatment and MBR. The technical and economic assessment showed that UV solely for disinfection purposes or ozone treatment is the most advantageous advanced treatment methods if the demands are restricted to pathogenic microorganisms. In terms of sustainability, sand filtration is the most advantageous method based on the technical and environmental assessment due to the low energy consumption and high efficiency with regards to removal of heavy metals.

  12. Technology enhanced peer learning and peer assessment

    DEFF Research Database (Denmark)

    Henriksen, Christian Bugge; Bregnhøj, Henrik; Rosthøj, Susanne

    2016-01-01

    This paper explores the application of learning designs featuring formalised and structured technology enhanced peer learning. These include student produced learning elements, peer review discussions and peer assessment in the BSc/MSc level summer course Restoration of European Ecosystems...... and Freshwaters (REEF), the Master thesis preparation seminars for the Master of Public Health (MPH) and the MOOC course Global Environmental Management (GEM). The application of student produced learning elements and peer review discussions is investigated by analyzing quotes from course evaluations...... and performing focus group interviews. The application of peer assessment is investigated by analyzing the agreement of peer assessment between students assessing the same assignment. Our analyses confirm previous research on the value of peer learning and peer assessment and we argue that there could also...

  13. Technology enhanced peer learning and peer assessment

    Directory of Open Access Journals (Sweden)

    Christian Bugge Henriksen

    2016-11-01

    Full Text Available This paper explores the application of learning designs featuring formalised and structured technology enhanced peer learning. These include student produced learning elements, peer review discussions and peer assessment in the BSc/MSc level summer course Restoration of European Ecosystems and Freshwaters (REEF, the Master thesis preparation seminars for the Master of Public Health (MPH and the MOOC course Global Environmental Management (GEM. The application of student produced learning elements and peer review discussions is investigated by analyzing quotes from course evaluations and performing focus group interviews. The application of peer assessment is investigated by analyzing the agreement of peer assessment between students assessing the same assignment. Our analyses confirm previous research on the value of peer learning and peer assessment and we argue that there could also be a huge benefit from developing learning design patterns that facilitate informal peer learning and reinforce knowledge sharing practices.

  14. Assessment of LWR spent fuel disposal options. Volume 2. System definition and assessments. Technical report

    Energy Technology Data Exchange (ETDEWEB)

    1979-07-01

    Volume 2, in addition to introducing and defining the requirements for the study, contains the detailed evaluation of the study cases in each of six assessment areas, and describes and evaluates a number of study variations.

  15. Low-level radioactive waste from commercial nuclear reactors. Volume 2. Treatment, storage, disposal, and transportation technologies and constraints

    Energy Technology Data Exchange (ETDEWEB)

    Jolley, R.L.; Dole, L.R.; Godbee, H.W.; Kibbey, A.H.; Oyen, L.C.; Robinson, S.M.; Rodgers, B.R.; Tucker, R.F. Jr.

    1986-05-01

    The overall task of this program was to provide an assessment of currently available technology for treating commercial low-level radioactive waste (LLRW), to initiate development of a methodology for choosing one technology for a given application, and to identify research needed to improve current treatment techniques and decision methodology. The resulting report is issued in four volumes. Volume 2 discusses the definition, forms, and sources of LLRW; regulatory constraints affecting treatment, storage, transportation, and disposal; current technologies used for treatment, packaging, storage, transportation, and disposal; and the development of a matrix relating treatment technology to the LLRW stream as an aid for choosing methods for treating the waste. Detailed discussions are presented for most LLRW treatment methods, such as aqueous processes (e.g., filtration, ion exchange); dewatering (e.g., evaporation, centrifugation); sorting/segregation; mechanical treatment (e.g., shredding, baling, compaction); thermal processes (e.g., incineration, vitrification); solidification (e.g., cement, asphalt); and biological treatment.

  16. Health Technology Assessment: a field still maturing!

    Directory of Open Access Journals (Sweden)

    Renaldo N. Battista

    2005-06-01

    Full Text Available

    With this issue’s focus on Health Technology Assessment (HTA, the Italian Journal of Public Health has tackled an area of growing importance in today’s increasingly complex health care delivery systems.

    As the articles in this issue demonstrate, HTA has grown from a relatively narrow technical focus to a form of policy research underway in dozens of countries. Since its inception just over three decades ago,HTA has evolved through three distinct phases: the machine, the disease and the delivery mode, with the third of these still underway.

    As the focus has shifted from machines to disease conditions to service delivery approaches, HTA has drawn on research and modes of discourse from a growing variety of disciplines. Thus, despite the evolution that continues, HTA remains, at its core, both multidisciplinary and pragmatic, for the strengths of HTA arise from its integration of the efforts of actors in multiple, diverse disciplines with a view to producing knowledge that will assist decision-makers. The machine phase was marked by a focus on the technical performance of health technologies, often embodying innovative approaches to diagnosis or treatment of human illness.

    Given the newness and costliness of many technologies selected for assessment, a significant emphasis was placed on assessing the safety of these devices. Imaging technologies were the subject of assessment in many settings, perhaps in part because devices such as the CT scanner produced remarkable visual results that were heralded as affording breakthroughs in diagnosis and treatment. One need only look through the programs of early HTA conferences to see the emphasis on high cost, infrastructure-intensive health technologies that was the hallmark of the machine period.

  17. Data summary of municipal solid waste management alternatives. Volume 3, Appendix A: Mass burn technologies

    Energy Technology Data Exchange (ETDEWEB)

    None

    1992-10-01

    This appendix on Mass Burn Technologies is the first in a series designed to identify, describe and assess the suitability of several currently or potentially available generic technologies for the management of municipal solid waste (MSW). These appendices, which cover eight core thermoconversion, bioconversion and recycling technologies, reflect public domain information gathered from many sources. Representative sources include: professional journal articles, conference proceedings, selected municipality solid waste management plans and subscription technology data bases. The information presented is intended to serve as background information that will facilitate the preparation of the technoeconomic and life cycle mass, energy and environmental analyses that are being developed for each of the technologies. Mass burn has been and continues to be the predominant technology in Europe for the management of MSW. In the United States, the majority of the existing waste-to-energy projects utilize this technology and nearly 90 percent of all currently planned facilities have selected mass burn systems. Mass burning generally refers to the direct feeding and combustion of municipal solid waste in a furnace without any significant waste preprocessing. The only materials typically removed from the waste stream prior to combustion are large bulky objects and potentially hazardous or undesirable wastes. The technology has evolved over the last 100 or so years from simple incineration to the most highly developed and commercially proven process available for both reducing the volume of MSW and for recovering energy in the forms of steam and electricity. In general, mass burn plants are considered to operate reliably with high availability.

  18. Conversion system overview assessment. Volume 1: solar thermoelectrics

    Energy Technology Data Exchange (ETDEWEB)

    Jayadev, T. S.; Henderson, J.; Finegold, J.; Benson, D.

    1979-08-01

    An assessment of thermoelectrics for solar energy conversion is given. There is significant potential for solar thermoelectrics in solar technologies where collector costs are low; e.g., Ocean Thermal Energy Conversion (OTEC) and solar ponds. Reports of two studies by manufacturers assessing the cost of thermoelectric generators in large scale production are included in the appendix and several new concepts thermoelectric systems are presented. (WHK)

  19. Natural-technological risk assessment and management

    Science.gov (United States)

    Burova, Valentina; Frolova, Nina

    2016-04-01

    EM-DAT statistical data on human impact and economic damages in the 1st semester 2015 are the highest since 2011: 41% of disasters were floods, responsible for 39% of economic damage and 7% of events were earthquakes responsible for 59% of total death toll. This suggests that disaster risk assessment and management still need to be improved and stay the principle issue in national and international related programs. The paper investigates the risk assessment and management practice in the Russian Federation at different levels. The method is proposed to identify the territories characterized by integrated natural-technological hazard. The maps of the Russian Federation zoning according to the integrated natural-technological hazard level are presented, as well as the procedure of updating the integrated hazard level taking into account the activity of separate processes. Special attention is paid to data bases on past natural and technological processes consequences, which are used for verification of current hazard estimation. The examples of natural-technological risk zoning for the country and some regions territory are presented. Different output risk indexes: both social and economic, are estimated taking into account requirements of end-users. In order to increase the safety of population of the Russian Federation the trans-boundaries hazards are also taken into account.

  20. Assessment of international air pollution prevention and control technology. Volume 2. Technical report. Report to Congress under CAA amendments of 1990, section 901(e) public law 104-549. Final report, December 1993-December 1995

    Energy Technology Data Exchange (ETDEWEB)

    Burklin, C.; Gundappa, M.; Jones, D.

    1996-08-01

    The report gives results of a study that identifies new and innovative air pollution prevention and/or control technologies, of selected industrialized countries, that are not currently used extensively in the U.S. The study addressed technologies that prevent or control the emissions of the pollutants from each of four sources of air pollution: (1) Urban emissions--ozone precursors to include nitrogen oxides (NOx), volatile organic componds (VOCs), particulate matter (PM), and air toxics; (2) Motor vehicle emissions--NOx, carbon monoxide (CO), and PM; (3) Toxic air emissions--any one of the 189 compounds on the list of hazardous air pollutants (HAPs) in the 1990 CAAA (Title III); and (4) Acid deposition--NOx, sulfur oxides (SOx), and, to a lesser extent, VOCs. The report describes the approach taken to identify potentially useful technologies, gives results of the technology search and evaluation, and describes the selected technologies.

  1. Assessment of international air pollution prevention and control technology. Volume 1. Executive summary. Report to Congress under CAA amendments of 1990, section 901(e) public law 101-549. Final report, December 1993-December 1995

    Energy Technology Data Exchange (ETDEWEB)

    Burklin, C.; Gundappa, M.; Jones, D.

    1996-08-01

    The report gives results of a study that identifies new and innovative air pollution prevention and/or control technologies, of selected industrialized countries, that are not currently used extensively in the U.S. The study addressed technologies that prevent or control the emissions of the pollutants from each of four sources of air pollution: (1) Urban emissions--ozone precursors to include nitrogen oxides (NOx), volatile organic componds (VOCs), particulate matter (PM), and air toxics; (2) Motor vehicle emissions--NOx, carbon monoxide (CO), and PM; (3) Toxic air emissions--any one of the 189 compounds on the list of hazardous air pollutants (HAPs) in the 1990 CAAA (Title III); and (4) Acid deposition--NOx, sulfur oxides (SOx), and, to a lesser extent, VOCs. The report describes the approach taken to identify potentially useful technologies, gives results of the technology search and evaluation, and describes the selected technologies.

  2. Energy Effectiveness Assessment of Composting Technologies

    OpenAIRE

    Plūme, I.

    2006-01-01

    The incorrect biomass composting improperly results in considerable emission of greenhouse gases, loss of effluent and composting heat into environment. The composting heat and gases utilisation is especially suitable for plant enrichment and heating of greenhouses. The mathematical model is worked out for assessment of energy effectiveness and sustainability of biomass composting process. Coefficient of energy effectiveness for traditional litter manure composting technologies is 0.45 and ca...

  3. Use of technology in children's dietary assessment.

    Science.gov (United States)

    Boushey, C J; Kerr, D A; Wright, J; Lutes, K D; Ebert, D S; Delp, E J

    2009-02-01

    Information on dietary intake provides some of the most valuable insights for mounting intervention programmes for the prevention of chronic diseases. With the growing concern about adolescent overweight, the need to accurately measure diet becomes imperative. Assessment among adolescents is problematic as this group has irregular eating patterns and they have less enthusiasm for recording food intake. We used qualitative and quantitative techniques among adolescents to assess their preferences for dietary assessment methods. Dietary assessment methods using technology, for example, a personal digital assistant (PDA) or a disposable camera, were preferred over the pen and paper food record. There was a strong preference for using methods that incorporate technology such as capturing images of food. This suggests that for adolescents, dietary methods that incorporate technology may improve cooperation and accuracy. Current computing technology includes higher resolution images, improved memory capacity and faster processors that allow small mobile devices to process information not previously possible. Our goal is to develop, implement and evaluate a mobile device (for example, PDA, mobile phone) food record that will translate to an accurate account of daily food and nutrient intake among adolescents. This mobile computing device will include digital images, a nutrient database and image analysis for identification and quantification of food consumption. Mobile computing devices provide a unique vehicle for collecting dietary information that reduces the burden on record keepers. Images of food can be marked with a variety of input methods that link the item for image processing and analysis to estimate the amount of food. Images before and after the foods are eaten can estimate the amount of food consumed. The initial stages and potential of this project will be described.

  4. Flat-panel volume CT: fundamental principles, technology, and applications.

    Science.gov (United States)

    Gupta, Rajiv; Cheung, Arnold C; Bartling, Soenke H; Lisauskas, Jennifer; Grasruck, Michael; Leidecker, Christianne; Schmidt, Bernhard; Flohr, Thomas; Brady, Thomas J

    2008-01-01

    Flat-panel volume computed tomography (CT) systems have an innovative design that allows coverage of a large volume per rotation, fluoroscopic and dynamic imaging, and high spatial resolution that permits visualization of complex human anatomy such as fine temporal bone structures and trabecular bone architecture. In simple terms, flat-panel volume CT scanners can be thought of as conventional multidetector CT scanners in which the detector rows have been replaced by an area detector. The flat-panel detector has wide z-axis coverage that enables imaging of entire organs in one axial acquisition. Its fluoroscopic and angiographic capabilities are useful for intraoperative and vascular applications. Furthermore, the high-volume coverage and continuous rotation of the detector may enable depiction of dynamic processes such as coronary blood flow and whole-brain perfusion. Other applications in which flat-panel volume CT may play a role include small-animal imaging, nondestructive testing in animal survival surgeries, and tissue-engineering experiments. Such versatility has led some to predict that flat-panel volume CT will gain importance in interventional and intraoperative applications, especially in specialties such as cardiac imaging, interventional neuroradiology, orthopedics, and otolaryngology. However, the contrast resolution of flat-panel volume CT is slightly inferior to that of multidetector CT, a higher radiation dose is needed to achieve a comparable signal-to-noise ratio, and a slower scintillator results in a longer scanning time.

  5. Oak Ridge National Laboratory Technology Logic Diagram. Volume 3, Technology evaluation data sheets: Part B, Dismantlement, Remedial action

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1, Technology Evaluation; Vol. 2, Technology Logic Diagram and Vol. 3, Technology EvaLuation Data Sheets. Part A of Vols. 1 and 2 focuses on RA. Part B of Vols. 1 and 2 focuses on the D&D of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TM, an explanation of the problems facing the volume-specific program, a review of identified technologies, and rankings of technologies applicable to the site. Volume 2 (Pts. A. B. and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A. B, and C) contains the TLD data sheets. This volume provides the technology evaluation data sheets (TEDS) for ER/WM activities (D&D, RA and WM) that are referenced by a TEDS code number in Vol. 2 of the TLD. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than is given for the technologies in Vol. 2.

  6. Oak Ridge National Laboratory Technology Logic Diagram. Volume 3, Technology evaluation data sheets: Part C, Robotics/automation, Waste management

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1, Technology Evaluation; Vol. 2, Technology Logic Diagram and Vol. 3, Technology EvaLuation Data Sheets. Part A of Vols. 1 and 2 focuses on RA. Part B of Vols. 1 and 2 focuses on the D&D of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TM, an explanation of the problems facing the volume-specific program, a review of identified technologies, and rankings of technologies applicable to the site. Volume 2 (Pts. A. B. and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A. B, and C) contains the TLD data sheets. This volume provides the technology evaluation data sheets (TEDS) for ER/WM activities (D&D, RA and WM) that are referenced by a TEDS code number in Vol. 2 of the TLD. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than is given for the technologies in Vol. 2.

  7. Y-12 Plant decontamination and decommissioning technology logic diagram for Building 9201-4. Volume 2: Technology logic diagram

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    The Y-12 Plant Decontamination and Decommissioning Technology Logic Diagram for Building 9201-4 (TLD) was developed to provide a decision-support tool that relates decontamination and decommissioning (D and D) problems at Bldg. 9201-4 to potential technologies that can remediate these problems. This TLD identifies the research, development, demonstration, testing, and evaluation needed for sufficient development of these technologies to allow for technology transfer and application to D and D and waste management (WM) activities. It is essential that follow-on engineering studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologies identified in the TLD and by finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk. The TLD consists of three fundamentally separate volumes: Vol. 1 (Technology Evaluation), Vol. 2 (Technology Logic Diagram), and Vol. 3 (Technology Evaluation Data Sheets). Volume 2 contains the logic linkages among environmental management goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 2 has been divided into five sections: Characterization, Decontamination, Dismantlement, Robotics/Automation, and Waste Management. Each section contains logical breakdowns of the Y-12 D and D problems by subject area and identifies technologies that can be reasonably applied to each D and D challenge.

  8. Comparison of life cycle assessment for different volume polypropylene jars

    Directory of Open Access Journals (Sweden)

    Krkić Nevena M.

    2012-01-01

    Full Text Available When deciding what packaging is the most appropriate for a product there are many factors to be considered. One of them is the impact of the packaging on environment. In this work, life cycle inventory and life cycle assessment of two different volume packagings were compared. The data were collected on the types and amounts of materials and energy consumption in the process of packaging and distribution of hand cream packed in polypropylene jars of 200 and 350 mL. Life cycle inventory (LCI and life cycle impact assessment (LCA were calculated. It was found that the total mass flow was higher for the jars of 350 mL. After analyzing individual flows, it was found that in both cycles (polypropylene jars of 200 and 350 mL,the consumption of fresh water was a dominant flow. This fresh water flow is mostly (95% consumed in the injection molding process of manufacturing jars from polypropylene granules. The LCA analysis showed no significant difference in global warming potential between different volume jars. The process that mostly affected global warming was the production of polypropylene jars from polypropylene granules by injection molding for both jar volumes. Judging by the global warming potential, there is no difference of the environmental impact between investigated jars, but considering the mass flow and water consumption, more environmental friendly were the 200 mL jars.

  9. Oak Ridge National Laboratory Technology Logic Diagram. Volume 1, Technology Evaluation: Part A, Decontamination and Decommissioning

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Strategic Roadmap for the Oak Ridge Reservation is a generalized planning document that identifies broad categories of issues that keep ORNL outside full compliance with the law and other legally binding agreements. Possible generic paths to compliance, issues, and the schedule for resolution of the issues one identified. The role of the Oak Ridge National Laboratory Technology Logic Diagram (TLD) is then to identify specific site issues (problems), identify specific technologies that can be brought to bear on the issues, and assess the current status and readiness of these remediation technologies within the constraints of the schedule commitment. Regulatory requirements and commitments contained in the Strategic Roadmap for the Oak Ridge Reservation are also included in the TLD as constraints to the application of immature technological solutions. Some otherwise attractive technological solutions may not be employed because they may not be deployable on the schedule enumerated in the regulatory agreements. The roadmap for ORNL includes a list of 46 comprehensive logic diagrams for WM of low-level, radioactive-mixed, hazardous, sanitary and industrial. and TRU waste. The roadmapping process gives comparisons of the installation as it exists to the way the installation should exist under full compliance. The identification of the issues is the goal of roadmapping. This allows accurate and timely formulation of activities.

  10. The development of health technology assessment.

    Science.gov (United States)

    Banta, David

    2003-02-01

    The field of health technology assessment (HTA) is still relatively new, but it has shown remarkable growth over the last decade, having spread first from the United States to Europe, and now to the entire world. HTA seeks to couple evidence with decision-making, and thus has similarities to evidence-based health care and evidence-based policy-making. The early history of HTA, beginning around 1975, reveals a first period of synthesising available evidence-principally that dealing with efficacy and cost-effectiveness of health care interventions-so as to put it in a format helpful to health policy-makers, especially those in national governments. From 1985 or so, the focus of the second period was on seeking more effective links with these policy-makers, particularly in Europe. The most recent period, beginning in the late 1990s, has been increasingly devoted to more effective dissemination and implementation in order to influence administrators and clinicians. While early assessments tended to focus on large, expensive, machine-based technologies, the scope has gradually widened to include smaller technologies, 'softer' technologies (such as counselling), and health care needs. Actual assessments have also taken on broader issues, such as organisational, social, and ethical implications. In the Member States of the European Union (EU), HTA activities are increasingly visible, and almost all now have a national focus for HTA associated with the Ministry of Health or its equivalent. Central and Eastern European countries are also developing HTA activities. Most recently, HTA has been highlighted by health policy documents from the European Commission. It seems likely that HTA will in the future be institutionalised in some form as part of EU activities.

  11. Does bioimpedance analysis or measurement of natriuretic peptides aid volume assessment in peritoneal dialysis patients?

    Science.gov (United States)

    Davenport, Andrew

    2013-01-01

    Cardiovascular mortality remains the commonest cause of death for peritoneal dialysis patients. As such, preventing persistent hypervolemia is important. On the other hand, hypovolemia may potentially risk episodes of acute kidney injury and loss of residual renal function, a major determinant of peritoneal dialysis technique survival. Bioimpedance has developed from a single-frequency research tool to a multi-frequency bioelectrical impedance analysis readily available in the clinic and capable of measuring extracellular, intracellular, and total body water. Similarly, natriuretic peptides released from the heart because of myocardial stretch and increased intracardiac volume have also been variously reported to be helpful in assessing volume status in peritoneal dialysis patients. The question then arises whether these newer technologies and biomarkers have supplanted the time-honored clinical assessment of hydration status or whether they are merely adjuncts that aid the experienced clinician.

  12. Tiger Team Assessment, Energy Technology Engineering Center

    Energy Technology Data Exchange (ETDEWEB)

    1991-04-01

    The Office Special Projects within the Office of Environment, Safety, and Health (EH) has the responsibility to conduct Tiger Team Assessments for the Secretary of Energy. This report presents the assessment of the buildings, facilities, and activities under the DOE/Rockwell Contract No. DE-AM03-76SF00700 for the Energy Technology Engineering Center (ETEC) and of other DOE-owned buildings and facilities at the Santa Susana Field Laboratory (SSFL) site in southeastern Ventura County, California, not covered under Contract No. DE-AM03-76SF00700, but constructed over the years under various other contracts between DOE and Rockwell International. ETEC is an engineering development complex operated for DOE by the Rocketdyne Division of Rockwell International Corporation. ETEC is located within SSFL on land owned by Rockwell. The balance of the SSFL complex is owned and operated by Rocketdyne, with the exception of a 42-acre parcel owned by the National Aeronautics and Space Administration (NASA). The primary mission of ETEC is to provide engineering, testing, and development of components related to liquid metals technology and to conduct applied engineering development of emerging energy technologies.

  13. Technology assessment of wind energy conversion systems

    Energy Technology Data Exchange (ETDEWEB)

    Meier, B. W.; Merson, T. J.

    1980-09-01

    Environmental data for wind energy conversion systems (WECSs) have been generated in support of the Technology Assessment of Solar Energy (TASE) program. Two candidates have been chosen to characterize the WECS that might be deployed if this technology makes a significant contribution to the national energy requirements. One WECS is a large machine of 1.5-MW-rated capacity that can be used by utilities. The other WECS is a small machine that is characteristic of units that might be used to meet residential or small business energy requirements. Energy storage systems are discussed for each machine to address the intermittent nature of wind power. Many types of WECSs are being studied and a brief review of the technology is included to give background for choosing horizontal axis designs for this study. Cost estimates have been made for both large and small systems as required for input to the Strategic Environmental Assessment Simulation (SEAS) computer program. Material requirements, based on current generation WECSs, are discussed and a general discussion of environmental impacts associated with WECS deployment is presented.

  14. ELECTRIC INFRASTRUCTURE TECHNOLOGY, TRAINING, AND ASSESSMENT PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    TREMEL, CHARLES L

    2007-06-28

    The objective of this Electric Infrastructure Technology, Training and Assessment Program was to enhance the reliability of electricity delivery through engineering integration of real-time technologies for wide-area applications enabling timely monitoring and management of grid operations. The technologies developed, integrated, tested and demonstrated will be incorporated into grid operations to assist in the implementation of performance-based protection/preventive measures into the existing electric utility infrastructure. This proactive approach will provide benefits of reduced cost and improved reliability over the typical schedule-based and as needed maintenance programs currently performed by utilities. Historically, utilities have relied on maintenance and inspection programs to diagnose equipment failures and have used the limited circuit isolation devices, such as distribution main circuit breakers to identify abnormal system performance. With respect to reliable problem identification, customer calls to utility service centers are often the sole means for utilities to identify problem occurrences and determine restoration methodologies. Furthermore, monitoring and control functions of equipment and circuits are lacking; thus preventing timely detection and response to customer outages. Finally, the two-way flow of real-time system information is deficient, depriving decision makers of key information required to effectively manage and control current electric grid demands to provide reliable customer service in abnormal situations. This Program focused on advancing technologies and the engineering integration required to incorporate them into the electric grid operations to enhance electrical system reliability and reduce utility operating costs.

  15. Industrial Sector Technology Use Model (ISTUM): industrial energy use in the United States, 1974-2000. Volume 4. Technology appendix

    Energy Technology Data Exchange (ETDEWEB)

    1978-06-19

    This volume of the 4-volume ISTUM documentation gives information on the individual technology specifications. The first chapter presents a general overview of the ISTUM technology data bases. It includes an explanation of the data-base printouts and how the separate-cost building blocks are combined to derive an aggregate-technology cost. The remaining chapters document the specific-technology-cost specifications. Boiler technologies (conventional coal steam, conventional natural gas and oil in the steam-service sector, black liquor and wood boilers, and space-heat service sector) and non-boiler conventional technologies (natural gas non-boiler, oil-fired non-boiler, coal-fired non-boiler technologies and non-boiler primary system costs) are covered in Chapter II. Chapter III, Fossil Energy Technologies, covers atmospheric fluidized-bed combustion, low-Btu gasification of coal, and medium-Btu gasification. Chapter IV, Cogeneration and Self-Generation Technologies, covers the steam service sector, machine-drive service sector, and electrolytic service sector. Solar and geothermal technologies (solar steam, solar space heat, and geothermal steam technologies) are covered in Chapter V, while Chapter VI covers conservation technologies. (MCW)

  16. Hazardous Waste Land Disposal Facility Assessment. Volume 2. Appendices

    Science.gov (United States)

    1988-09-01

    Decontamination Assessment of Land and Facilities at RIA ( DALF )(RNACCPHT, 3 1984/RIC 84034R01), identified three types of potentially contaminated waste...Bibliography were reviewed. The DALF and the current Remedial Investigation/Feasibility Studies (RI/FS) of Ebasco Services Incorporated (Ebasco) and...53,000 12 119,000 -- 119,000 -- - 119,000I TOTALS L.s 65,010 AI R 6,7.6s,284.907 I )A/ DALF , 1984. 2/ Volume rounded to nearest thousand bank

  17. ['Medical technology assessment'; more than just efficacy].

    Science.gov (United States)

    Buskens, E

    2000-03-25

    'Medical technology assessment' means investigating the developments, costs and effects of medical technologies. Practising physicians increasingly are confronted with consequences of management based on such research results. In order to follow and participate in the discussion they should be aware of this and know the jargon. In policy problems, measures of effect in natural units (e.g. cardiovascular mortality) offer advantages over measures of clinical findings (e.g. decrease of the serum cholesterol levels). Survival in various health states and disorders can be compared by multiplying the number of life years gained by a factor for the quality of life in those years. Costs are usually expressed in monetary terms. These may be calculated as direct medical costs on the basis of fees or actual costs for society. The latter is the case when the balancing is based on a societal perspective. The societal perspective enables a more objective assessment of health effects than when a patient perspective is used. 'Incremental cost effectiveness' expresses where extra expenditures will have maximum effect, and bears higher relevance for policy decisions than mean costs per unit of effect. Immaterial matters are more difficult to assess, but should nevertheless be considered in selecting the policy to be implemented.

  18. Clean Coal Technology Programs: Program Update 2003 (Volume 1)

    Energy Technology Data Exchange (ETDEWEB)

    Assistant Secretary for Fossil Energy

    2003-12-01

    Annual report on the Clean Coal Technology Demonstration Program (CCTDP), Power Plant Improvement Initiative (PPII), and Clean Coal Power Initiative (CCPI). The report addresses the roles of the programs, implementation, funding and costs, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

  19. Clean Coal Technology Programs: Completed Projects (Volume 2)

    Energy Technology Data Exchange (ETDEWEB)

    Assistant Secretary for Fossil Energy

    2003-12-01

    Annual report on the Clean Coal Technology Demonstration Program (CCTDP), Power Plant Improvement Initiative (PPII), and Clean Coal Power Initiative (CCPI). The report addresses the roles of the programs, implementation, funding and costs, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

  20. Recent Progress in Data Engineering and Internet Technology Volume 1

    CERN Document Server

    Gaol, Ford Lumban

    2013-01-01

    The latest inventions in internet technology influence most of business and daily activities. Internet security, internet data management, web search, data grids, cloud computing, and web-based applications play vital roles, especially in business and industry, as more transactions go online and mobile. Issues related to ubiquitous computing are becoming critical.   Internet technology and data engineering should reinforce efficiency and effectiveness of business processes. These technologies should help people make better and more accurate decisions by presenting necessary information and possible consequences for the decisions. Intelligent information systems should help us better understand and manage information with ubiquitous data repository and cloud computing.   This book is a compilation of some recent research findings in Internet Technology and Data Engineering. This book provides state-of-the-art accounts in computational algorithms/tools, database management and database technologies,  intelli...

  1. Recent Progress in Data Engineering and Internet Technology Volume 2

    CERN Document Server

    Gaol, Ford Lumban

    2012-01-01

    The latest inventions in internet technology influence most of business and daily activities. Internet security, internet data management, web search, data grids, cloud computing, and web-based applications play vital roles, especially in business and industry, as more transactions go online and mobile. Issues related to ubiquitous computing are becoming critical.   Internet technology and data engineering should reinforce efficiency and effectiveness of business processes. These technologies should help people make better and more accurate decisions by presenting necessary information and possible consequences for the decisions. Intelligent information systems should help us better understand and manage information with ubiquitous data repository and cloud computing.   This book is a compilation of some recent research findings in Internet Technology and Data Engineering. This book provides state-of-the-art accounts in computational algorithms/tools, database management and database technologies,  intelli...

  2. Sex Assessment from the Volume of the First Metatarsal Bone: A Comparison of Linear and Volume Measurements.

    Science.gov (United States)

    Gibelli, Daniele; Poppa, Pasquale; Cummaudo, Marco; Mattia, Mirko; Cappella, Annalisa; Mazzarelli, Debora; Zago, Matteo; Sforza, Chiarella; Cattaneo, Cristina

    2017-02-23

    Sexual dimorphism is a crucial characteristic of skeleton. In the last years, volumetric and surface 3D acquisition systems have enabled anthropologists to assess surfaces and volumes, whose potential still needs to be verified. This article aimed at assessing volume and linear parameters of the first metatarsal bone through 3D acquisition by laser scanning. Sixty-eight skeletons underwent 3D scan through laser scanner: Seven linear measurements and volume from each bone were assessed. A cutoff value of 13,370 mm(3) was found, with an accuracy of 80.8%. Linear measurements outperformed volume: metatarsal length and mediolateral width of base showed higher cross-validated accuracies (respectively, 82.1% and 79.1%, raising at 83.6% when both of them were included). Further studies are needed to verify the real advantage for sex assessment provided by volume measurements. © 2017 American Academy of Forensic Sciences.

  3. Technology Assessment Need: Review on Attractiveness and Competitiveness

    Science.gov (United States)

    Salwa Sait, Siti; Merlinda Muharam, Farrah; Chin, Thoo Ai; Sulaiman, Zuraidah

    2017-06-01

    Technology assessment is crucial in managing technology for the purpose of technology exploitation. With business environment continuously changing, firms have to address this issue critically as technology is considered one of the important elements to evaluate performance and gain competitive advantage. Missteps in deciding the best technology to be developed, employed or maintained would cost the firm overall value. To fulfil the need of finding the appropriate scale to assess suitable technology, this paper summarizes that technology assessment (TA) should cover two main aspects, namely technology attractiveness and competitiveness. These components are seen capable to link the scale suggested towards evaluation of financial and non-financial performance towards competitive advantage.

  4. Assessing the performance of health technology assessment organizations: a framework.

    Science.gov (United States)

    Lafortune, Louise; Farand, Lambert; Mondou, Isabelle; Sicotte, Claude; Battista, Renaldo

    2008-01-01

    In light of growing demands for public accountability, the broadening scope of health technology assessment organizations (HTAOs) activities and their increasing role in decision-making underscore the importance for them to demonstrate their performance. Based on Parson's social action theory, we propose a conceptual model that includes four functions an organization needs to balance to perform well: (i) goal attainment, (ii) production, (iii) adaptation to the environment, and (iv) culture and values maintenance. From a review of the HTA literature, we identify specific dimensions pertaining to the four functions and show how they relate to performance. We compare our model with evaluations reported in the scientific and gray literature to confirm its capacity to accommodate various evaluation designs, contexts of evaluation, and organizational models and perspectives. Our findings reveal the dimensions of performance most often assessed and other important ones that, hitherto, remain unexplored. The model provides a flexible and theoretically grounded tool to assess the performance of HTAOs.

  5. The 5-Year Outlook on Science and Technology 1981. Source Materials Volume 2.

    Science.gov (United States)

    National Science Foundation, Washington, DC.

    This is the second of two volumes of source documents commissioned by the National Science Foundation in preparing the second 5-Year Outlook on Science and Technology for transmission to the Congress. This volume consists of the views of individuals selected by the Committee on Science, Engineering and Public Policy of the American Association for…

  6. A conceptual framework for energy technology sustainability assessment

    CSIR Research Space (South Africa)

    Musango, Josephine K

    2011-03-01

    Full Text Available the framework of incorporating the system dynamics methodology in energy technology assessment theory and practice within the context of sustainable development. The framework provides for technology sustainability assessment, which, in turn, can guide...

  7. Constructive technology assessment of gene expression profiling for breast cancer

    NARCIS (Netherlands)

    Retèl, Valesca Pavlawna

    2011-01-01

    Constructive Technology Assessment (CTA) can be used as a complementary approach to Health Technology Assessment (HTA), especially for the early and dynamic introduction of new technologies in a controlled way. CTA is based on the idea that during the course of technology development, choices are co

  8. Proceedings of the Twenty-First Water Reactor Safety Information Meeting: Volume 1, Plenary session; Advanced reactor research; advanced control system technology; advanced instrumentation and control hardware; human factors research; probabilistic risk assessment topics; thermal hydraulics; thermal hydraulic research for advanced passive LWRs

    Energy Technology Data Exchange (ETDEWEB)

    Monteleone, S. [Brookhaven National Lab., Upton, NY (United States)] [comp.

    1994-04-01

    This three-volume report contains 90 papers out of the 102 that were presented at the Twenty-First Water Reactor Safety Information Meeting held at the Bethesda Marriott Hotel, Bethesda, Maryland, during the week of October 25--27, 1993. The papers are printed in the order of their presentation in each session and describe progress and results of programs in nuclear safety research conducted in this country and abroad. Foreign participation in the meeting included papers presented by researchers from France, Germany, Japan, Russia, Switzerland, Taiwan, and United Kingdom. The titles of the papers and the names of the authors have been updated and may differ from those that appeared in the final program of the meeting. Individual papers have been cataloged separately. This document, Volume 1 covers the following topics: Advanced Reactor Research; Advanced Instrumentation and Control Hardware; Advanced Control System Technology; Human Factors Research; Probabilistic Risk Assessment Topics; Thermal Hydraulics; and Thermal Hydraulic Research for Advanced Passive Light Water Reactors.

  9. Mobile technology for mental health assessment.

    Science.gov (United States)

    Areàn, Patricia A; Hoa Ly, Kien; Andersson, Gerhard

    2016-06-01

    Assessment and outcome monitoring are critical for the effective detection and treatment of mental illness. Traditional methods of capturing social, functional, and behavioral data are limited to the information that patients report back to their health care provider at selected points in time. As a result, these data are not accurate accounts of day-to-day functioning, as they are often influenced by biases in self-report. Mobile technology (mobile applications on smartphones, activity bracelets) has the potential to overcome such problems with traditional assessment and provide information about patient symptoms, behavior, and functioning in real time. Although the use of sensors and apps are widespread, several questions remain in the field regarding the reliability of off-the-shelf apps and sensors, use of these tools by consumers, and provider use of these data in clinical decision-making.

  10. Fort Irwin Integrated Resource Assessment. Volume 2, Baseline detail

    Energy Technology Data Exchange (ETDEWEB)

    Richman, E.E.; Keller, J.M.; Dittmer, A.L.; Hadley, D.L.

    1994-01-01

    This report documents the assessment of baseline energy use at Fort Irwin, a US Army Forces Command facility near Barstow, California. It is a companion report to Volume 1, Executive Summary, and Volume 3, Integrated Resource Assessment. The US Army Forces Command (FORSCOM) has tasked the US Department of Energy (DOE) Federal Energy Management Program (FEMP), supported by the Pacific Northwest Laboratory (PNL), to identify, evaluate, and assist in acquiring all cost-effective energy projects at Fort Irwin. This is part of a model program that PNL has designed to support energy-use decisions in the federal sector. This program (1) identifies and evaluates all cost-effective energy projects; (2) develops a schedule at each installation for project acquisition considering project type, size, timing, and capital requirements, as well as energy and dollar savings; and (3) targets 100% of the financing required to implement energy efficiency projects. PNL applied this model program to Fort Irwin. This analysis examines the characteristics of electric, propane gas, and vehicle fuel use for a typical operating year. It records energy-use intensities for the facilities at Fort Irwin by building type and energy end use. It also breaks down building energy consumption by fuel type, energy end use, and building type. A complete energy consumption reconciliation is presented that accounts for all energy use among buildings, utilities, and applicable losses.

  11. Fort Stewart integrated resource assessment. Volume 2, Baseline detail

    Energy Technology Data Exchange (ETDEWEB)

    Keller, J.M.; Sullivan, G.P.; Wahlstrom, R.R.; Larson, L.L.

    1993-08-01

    This report documents the assessment of baseline energy use at Fort Stewart, a US Army Forces Command facility located near Savannah, Georgia. This is a companion report to Volume 1, Executive Summary, and Volume 3, Integrated Resource Assessment. The US Army Forces Command (FORSCOM) tasked Pacific Northwest Laboratory (PNL) to identify, evaluate, and assist in acquiring all cost-effective energy projects at Fort Stewart. PNL, in support of the US Department of Energy (DOE) Federal Energy Management Program (FEMP), has designed a model program applicable to the federal sector for this purpose. The model program (1) identifies and evaluates all cost-effective energy projects; (2) develops a schedule at each installation for project acquisition considering project type, size, timing, and capital requirements, as well as energy and dollar savings; and (3) targets 100% of the financing required to implement energy efficiency projects. PNL applied this model program to Fort Stewart. The analysis examines the characteristics of electric, natural gas, oil, propane, and wood chip use for fiscal year (FY) 1990. The results include energy-use intensities for the facilities at Fort Stewart by building type, fuel type, and energy end use. A complete energy consumption reconciliation is presented that accounts for the distribution of all major energy uses and losses among buildings, utilities, and central systems.

  12. Human choice and climate change. Volume 2: Resources and technology

    Energy Technology Data Exchange (ETDEWEB)

    Rayner, S.; Malone, E.L.

    1997-12-31

    Foreward: Preface; Introduction; The natural science of global climate change; Land and water use; Coastal zones and oceans; Energy and industry; Energy and social systems; Technological change; and Sponsoring organizations, International Advisory Board, and project participants.

  13. TECHNOLOGY EVALUATION REPORT: RETECH'S PLASMA CENTRIFUGAL FURNACE - VOLUME I

    Science.gov (United States)

    A demonstration of the Retech, Inc. Plasma Centrifugal Furnace (PCF) was conducted under the Superfund Innovative Technology Evaluation (SITE) Program at the Department of Energy's (DOE's) Component Development and Integration Facility in Butte, Montana. The furnace uses heat gen...

  14. QuEST: Qualifying Environmentally Sustainable Technologies. Volume 6

    Science.gov (United States)

    Lewis, Pattie

    2011-01-01

    QuEST is a publication of the NASA Technology Evaluation for Environmental Risk Mitigation Principal Center (TEERM). This issue contains brief articles on: Risk Identification and Mitigation, Material Management and Substitution Efforts--Hexavalent Chrome-free Coatings and Low volatile organic compounds (VOCs) Coatings, Lead-Free Electronics, Corn-Based Depainting Media; Alternative Energy Efforts Hydrogen Sensors and Solar Air Conditioning. Other TEERM Efforts include: Energy and Water Management and Remediation Technology Collaboration.

  15. [Indirect costs in health technology assessment].

    Science.gov (United States)

    Jakubczyk, Michał; Wrona, Witold; Macioch, Tomasz; Golicki, Dominik; Niewada, Maciej; Hermanowski, Tomasz

    2010-01-01

    In the health technology assessment it is crucial to define the perspective of the analysis. When the societal perspective is chosen it is necessary to include all the costs incurred by the society, also the costs of lost productivity resulting from absence of sick employees from work or their reduced efficiency at work. The aim of this article is to present the notion of indirect costs, their importance in health technology assessment and the methods of calculation. The economic literature has been reviewed for the state of knowledge on indirect costs. Three methods of calculation are described: human capital method, friction cost method or health state valuation. Indirect costs in Western European countries can amount to more than half of total costs attributed to the illness and its treatment. In the literature there is no consensus regarding the proper method of indirect costs calculation. It is necessary to conduct further theoretical and empirical research in the area of indirect costs and enhance discussion among Polish pharmacoeconomists.

  16. Life cycle assessment of biogas upgrading technologies.

    Science.gov (United States)

    Starr, Katherine; Gabarrell, Xavier; Villalba, Gara; Talens, Laura; Lombardi, Lidia

    2012-05-01

    This article evaluates the life cycle assessment (LCA) of three biogas upgrading technologies. An in-depth study and evaluation was conducted on high pressure water scrubbing (HPWS), as well as alkaline with regeneration (AwR) and bottom ash upgrading (BABIU), which additionally offer carbon storage. AwR and BABIU are two novel technologies that utilize waste from municipal solid waste incinerators - namely bottom ash (BA) and air pollution control residues (APC) - and are able to store CO(2) from biogas through accelerated carbonation processes. These are compared to high pressure water scrubbing (HPWS) which is a widely used technology in Europe. The AwR uses an alkaline solution to remove the CO(2) and then the solution - rich in carbonate and bicarbonate ions - is regenerated through carbonation of APC. The BABIU process directly exposes the gas to the BA to remove and immediately store the CO(2), again by carbonation. It was determined that the AwR process had an 84% higher impact in all LCA categories largely due to the energy intensive production of the alkaline reactants. The BABIU process had the lowest impact in most categories even when compared to five other CO(2) capture technologies on the market. AwR and BABIU have a particularly low impact in the global warming potential category as a result of the immediate storage of the CO(2). For AwR, it was determined that using NaOH instead of KOH improves its environmental performance by 34%. For the BABIU process the use of renewable energies would improve its impact since accounts for 55% of the impact. Copyright © 2011 Elsevier Ltd. All rights reserved.

  17. Hybrid Propulsion Technology Program, phase 1. Volume 1: Executive summary

    Science.gov (United States)

    1989-01-01

    The study program was contracted to evaluate concepts of hybrid propulsion, select the most optimum, and prepare a conceptual design package. Further, this study required preparation of a technology definition package to identify hybrid propulsion enabling technologies and planning to acquire that technology in Phase 2 and demonstrate that technology in Phase 3. Researchers evaluated two design philosophies for Hybrid Rocket Booster (HRB) selection. The first is an ASRM modified hybrid wherein as many components/designs as possible were used from the present Advanced Solid Rocket Motor (ASRM) design. The second was an entirely new hybrid optimized booster using ASRM criteria as a point of departure, i.e., diameter, thrust time curve, launch facilities, and external tank attach points. Researchers selected the new design based on the logic of optimizing a hybrid booster to provide NASA with a next generation vehicle in lieu of an interim advancement over the ASRM. The enabling technologies for hybrid propulsion are applicable to either and vehicle design may be selected at a downstream point (Phase 3) at NASA's discretion. The completion of these studies resulted in ranking the various concepts of boosters from the RSRM to a turbopump fed (TF) hybrid. The scoring resulting from the Figure of Merit (FOM) scoring system clearly shows a natural growth path where the turbopump fed solid liquid staged combustion hybrid provides maximized payload and the highest safety, reliability, and low life cycle costing.

  18. Second annual clean coal technology conference: Proceedings. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-09

    The Second Annual Clean Coal Technology Conference was held at Atlanta, Georgia, September 7--9, 1993. The Conference, cosponsored by the US Department of Energy (USDOE) and the Southern States Energy Board (SSEB), seeks to examine the status and role of the Clean Coal Technology Demonstration Program (CCTDP) and its projects. The Program is reviewed within the larger context of environmental needs, sustained economic growth, world markets, user performance requirements and supplier commercialization activities. This will be accomplished through in-depth review and discussion of factors affecting domestic and international markets for clean coal technology, the environmental considerations in commercial deployment, the current status of projects, and the timing and effectiveness of transfer of data from these projects to potential users, suppliers, financing entities, regulators, the interested environmental community and the public. Individual papers have been entered separately.

  19. ICSOFT 2006 : First International Conference on Software and Data Technologies, Volume 1

    NARCIS (Netherlands)

    Filipe, Joaquim; Shishkov, Boris; Helfert, Markus

    2006-01-01

    This volume contains the proceedings of the first International Conference on Software and Data Technologies (ICSOFT 2006), organized by the Institute for Systems and Technologies of Information, Communication and Control (INSTICC) in cooperation with the Object Management Group (OMG), sponsored by

  20. The Health Technology Assessment of companion diagnostics: experience of NICE.

    Science.gov (United States)

    Byron, Sarah K; Crabb, Nick; George, Elisabeth; Marlow, Mirella; Newland, Adrian

    2014-03-15

    Companion diagnostics are used to aid clinical decision making to identify patients who are most likely to respond to treatment. They are becoming increasingly important as more new pharmaceuticals receive licensed indications that require the use of a companion diagnostic to identify the appropriate patient subgroup for treatment. These pharmaceuticals have proven benefit in the treatment of some cancers and other diseases, and also have potential to precisely tailor treatments to the individual in the future. However, the increasing use of companion diagnostics could place a substantial burden on health system resources to provide potentially high volumes of testing. This situation, in part, has led policy makers and Health Technology Assessment (HTA) bodies to review the policies and methods used to make reimbursement decisions for pharmaceuticals requiring companion diagnostics. The assessment of a pharmaceutical alongside the companion diagnostic used in the clinical trials may be relatively straightforward, although there are a number of challenges associated with assessing pharmaceuticals where a range of alternative companion diagnostics are available for use in routine clinical practice. The UK HTA body, the National Institute for Health and Care Excellence (NICE), has developed policy for considering companion diagnostics using its Technology Appraisal and Diagnostics Assessment Programs. Some HTA bodies in other countries have also adapted their policies and methods to accommodate the assessment of companion diagnostics. Here, we provide insight into the HTA of companion diagnostics for reimbursement decisions and how the associated challenges are being addressed, in particular by NICE. See all articles in this CCR Focus section, "The Precision Medicine Conundrum: Approaches to Companion Diagnostic Co-development."

  1. ASEAN--USAID Buildings Energy Conservation Project final report. Volume 2, Technology

    Energy Technology Data Exchange (ETDEWEB)

    Levine, M.D.; Busch, J.F. [eds.

    1992-06-01

    This volume reports on research in the area of energy conservation technology applied to commercial buildings in the Association of Southeast Asian Nations (ASEAN) region. Unlike Volume I of this series, this volume is a compilation of original technical papers prepared by different authors in the project. In this regard, this volume is much like a technical journal. The papers that follow report on research conducted by both US and ASEAN researchers. The authors representing Indonesia, Malaysia, Philippines, and Thailand, come from a range of positions in the energy arena, including government energy agencies, electric utilities, and universities. As such, they account for a wide range of perspectives on energy problems and the role that technology can play in solving them. This volume is about using energy more intelligently. In some cases, the effort is towards the use of more advanced technologies, such as low-emittance coatings on window glass, thermal energy storage, or cogeneration. In others, the emphasis is towards reclaiming traditional techniques for rendering energy services, but in new contexts such as lighting office buildings with natural light, or cooling buildings of all types with natural ventilation. Used in its broadest sense, the term ``technology`` encompasses all of the topics addressed in this volume. Along with the more customary associations of technology, such as advanced materials and equipment and the analysis of their performance, this volume treats design concepts and techniques, analysis of ``secondary`` impacts from applying technologies (i.e., unintended impacts, or impacts on parties not directly involved in the purchase and use of the technology), and the collection of primary data used for conducting technical analyses.

  2. Drug delivery system innovation and Health Technology Assessment: Upgrading from Clinical to Technological Assessment.

    Science.gov (United States)

    Panzitta, Michele; Bruno, Giorgio; Giovagnoli, Stefano; Mendicino, Francesca R; Ricci, Maurizio

    2015-11-30

    Health Technology Assessment (HTA) is a multidisciplinary health political instrument that evaluates the consequences, mainly clinical and economical, of a health care technology; the HTA aim is to produce and spread information on scientific and technological innovation for health political decision making process. Drug delivery systems (DDS), such as nanocarriers, are technologically complex but they have pivotal relevance in therapeutic innovation. The HTA process, as commonly applied to conventional drug evaluation, should upgrade to a full pharmaceutical assessment, considering the DDS complexity. This is useful to study more in depth the clinical outcome and to broaden its critical assessment toward pharmaceutical issues affecting the patient and not measured by the current clinical evidence approach. We draw out the expertise necessary to perform the pharmaceutical assessment and we propose a format to evaluate the DDS technological topics such as formulation and mechanism of action, physicochemical characteristics, manufacturing process. We integrated the above-mentioned three points in the Evidence Based Medicine approach, which is data source for any HTA process. In this regard, the introduction of a Pharmaceutics Expert figure in the HTA could be fundamental to grant a more detailed evaluation of medicine product characteristics and performances and to help optimizing DDS features to overcome R&D drawbacks. Some aspects of product development, such as manufacturing processes, should be part of the HTA as innovative manufacturing processes allow new products to reach more effectively patient bedside. HTA so upgraded may encourage resource allocating payers to invest in innovative technologies and providers to focus on innovative material properties and manufacturing processes, thus contributing to bring more medicines in therapy in a sustainable manner.

  3. County-Level Climate Uncertainty for Risk Assessments: Volume 1.

    Energy Technology Data Exchange (ETDEWEB)

    Backus, George A.; Lowry, Thomas Stephen; Jones, Shannon M; Walker, La Tonya Nicole; Roberts, Barry L; Malczynski, Leonard A.

    2017-06-01

    This report uses the CMIP5 series of climate model simulations to produce country- level uncertainty distributions for use in socioeconomic risk assessments of climate change impacts. It provides appropriate probability distributions, by month, for 169 countries and autonomous-areas on temperature, precipitation, maximum temperature, maximum wind speed, humidity, runoff, soil moisture and evaporation for the historical period (1976-2005), and for decadal time periods to 2100. It also provides historical and future distributions for the Arctic region on ice concentration, ice thickness, age of ice, and ice ridging in 15-degree longitude arc segments from the Arctic Circle to 80 degrees latitude, plus two polar semicircular regions from 80 to 90 degrees latitude. The uncertainty is meant to describe the lack of knowledge rather than imprecision in the physical simulation because the emphasis is on unfalsified risk and its use to determine potential socioeconomic impacts. The full report is contained in 27 volumes.

  4. Industrial Sector Technology Use Model (ISTUM): industrial energy use in the United States, 1974-2000. Volume 4. Technology appendix. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    1979-10-01

    Volume IV of the ISTUM documentation gives information on the individual technology specifications, but relates closely with Chapter II of Volume I. The emphasis in that chapter is on providing an overview of where each technology fits into the general-model logic. Volume IV presents the actual cost structure and specification of every technology modeled in ISTUM. The first chapter presents a general overview of the ISTUM technology data base. It includes an explanation of the data base printouts and how the separate-cost building blocks are combined to derive an aggregate-technology cost. The remaining chapters are devoted to documenting the specific-technology cost specifications. Technologies included are: conventional technologies (boiler and non-boiler conventional technologies); fossil-energy technologies (atmospheric fluidized bed combustion, low Btu coal and medium Btu coal gasification); cogeneration (steam, machine drive, and electrolytic service sectors); and solar and geothermal technologies (solar steam, solar space heat, and geothermal steam technologies), and conservation technologies.

  5. Technology in Schools: Suggestions, Tools and Guidelines for Assessing Technology in Elementary and Secondary Education.

    Science.gov (United States)

    Ogle, Tom; Branch, Morgan; Canada, Bethann; Christmas, Oren; Clement, John; Fillion, Judith; Goddard, Ed; Loudat, N. Blair; Purwin, Tom; Rogers, Andy; Schmitt, Carl; Vinson, Mike

    This handbook is intended to facilitate the assessment of technology used to support elementary and secondary education in the United States. It is designed to help decision makers and technology users prepare, collect and assess information about whether and how technology is being used in their school systems. To make assessments that will be…

  6. Fluid Volume Overload and Congestion in Heart Failure: Time to Reconsider Pathophysiology and How Volume Is Assessed.

    Science.gov (United States)

    Miller, Wayne L

    2016-08-01

    Volume regulation, assessment, and management remain basic issues in patients with heart failure. The discussion presented here is directed at opening a reassessment of the pathophysiology of congestion in congestive heart failure and the methods by which we determine volume overload status. Peer-reviewed historical and contemporary literatures are reviewed. Volume overload and fluid congestion remain primary issues for patients with chronic heart failure. The pathophysiology is complex, and the simple concept of intravascular fluid accumulation is not adequate. The dynamics of interstitial and intravascular fluid compartment interactions and fluid redistribution from venous splanchnic beds to central pulmonary circulation need to be taken into account in strategies of volume management. Clinical bedside evaluations and right heart hemodynamic assessments can alert clinicians of changes in volume status, but only the quantitative measurement of total blood volume can help identify the heterogeneity in plasma volume and red blood cell mass that are features of volume overload in patients with chronic heart failure and help guide individualized, appropriate therapy-not all volume overload is the same. © 2016 American Heart Association, Inc.

  7. Hybrid propulsion technology program. Volume 1: Conceptional design package

    Science.gov (United States)

    Jensen, Gordon E.; Holzman, Allen L.; Leisch, Steven O.; Keilbach, Joseph; Parsley, Randy; Humphrey, John

    1989-01-01

    A concept design study was performed to configure two sizes of hybrid boosters; one which duplicates the advanced shuttle rocket motor vacuum thrust time curve and a smaller, quarter thrust level booster. Two sizes of hybrid boosters were configured for either pump-fed or pressure-fed oxygen feed systems. Performance analyses show improved payload capability relative to a solid propellant booster. Size optimization and fuel safety considerations resulted in a 4.57 m (180 inch) diameter large booster with an inert hydrocarbon fuel. The preferred diameter for the quarter thrust level booster is 2.53 m (96 inches). As part of the design study critical technology issues were identified and a technology acquisition and demonstration plan was formulated.

  8. What Do They Understand? Using Technology to Facilitate Formative Assessment

    Science.gov (United States)

    Mitten, Carolyn; Jacobbe, Tim; Jacobbe, Elizabeth

    2017-01-01

    Formative assessment is so important to inform teachers' planning. A discussion of the benefits of using technology to facilitate formative assessment explains how four primary school teachers adopted three different apps to make their formative assessment more meaningful and useful.

  9. Economic Risk Assessment Taking Into Account the Volume Oscillator Indicators

    Directory of Open Access Journals (Sweden)

    Loredana Mihaela LAPADUSI

    2016-09-01

    Full Text Available Economic risk can be assessed from many points of view, but generally speaking it means the firm's inability to match workload with cost structure. Expansion of production capacity, adaptation to new technologies, diversification of products are only a few factors influencing risk. These, along with financial risk and bankruptcy risk constitute the most important category of risk which presents a great interest for the banks, shareholders, managers, business partners, etc. The purpose of this article is to provide a brief overview of tje oscillation of your company's activity from the point of view of economic risk. The main objective of this research lies in economic risk assessment by means of the margin of safety, the safety index and critical time point.

  10. Accurate assessment of breast volume: a study comparing the volumetric gold standard (direct water displacement measurement of mastectomy specimen) with a 3D laser scanning technique.

    Science.gov (United States)

    Yip, Jia Miin; Mouratova, Naila; Jeffery, Rebecca M; Veitch, Daisy E; Woodman, Richard J; Dean, Nicola R

    2012-02-01

    Preoperative assessment of breast volume could contribute significantly to the planning of breast-related procedures. The availability of 3D scanning technology provides us with an innovative method for doing this. We performed this study to compare measurements by this technology with breast volume measurement by water displacement. A total of 30 patients undergoing 39 mastectomies were recruited from our center. The volume of each patient's breast(s) was determined with a preoperative 3D laser scan. The volume of the mastectomy specimen was then measured in the operating theater by water displacement. There was a strong linear association between breast volumes measured using the 2 different methods when using a Pearson correlation (r = 0.95, P Scanner as a tool for assessment of breast volume.

  11. Dual-Use Space Technology Transfer Conference and Exhibition. Volume 2

    Science.gov (United States)

    Krishen, Kumar (Compiler)

    1994-01-01

    This is the second volume of papers presented at the Dual-Use Space Technology Transfer Conference and Exhibition held at the Johnson Space Center February 1-3, 1994. Possible technology transfers covered during the conference were in the areas of information access; innovative microwave and optical applications; materials and structures; marketing and barriers; intelligent systems; human factors and habitation; communications and data systems; business process and technology transfer; software engineering; biotechnology and advanced bioinstrumentation; communications signal processing and analysis; medical care; applications derived from control center data systems; human performance evaluation; technology transfer methods; mathematics, modeling, and simulation; propulsion; software analysis and decision tools; systems/processes in human support technology; networks, control centers, and distributed systems; power; rapid development; perception and vision technologies; integrated vehicle health management; automation technologies; advanced avionics; and robotics technologies.

  12. Technology-Based Classroom Assessments: Alternatives to Testing

    Science.gov (United States)

    Salend, Spencer J.

    2009-01-01

    Although many teachers are using new technologies to differentiate instruction and administer tests, educators are also employing a range of technology-based resources and strategies to implement a variety of classroom assessments as alternatives to standardized and teacher-made testing. Technology-based classroom assessments focus on the use of…

  13. Technology-Based Classroom Assessments: Alternatives to Testing

    Science.gov (United States)

    Salend, Spencer J.

    2009-01-01

    Although many teachers are using new technologies to differentiate instruction and administer tests, educators are also employing a range of technology-based resources and strategies to implement a variety of classroom assessments as alternatives to standardized and teacher-made testing. Technology-based classroom assessments focus on the use of…

  14. 75 FR 79354 - Assessment Technology Standards Request for Information (RFI)

    Science.gov (United States)

    2010-12-20

    ..., virtual worlds, mobile devices, and simulations. 3.2.28 Accessibility. How do technology standards ensure... Assessment Technology Standards Request for Information (RFI) AGENCY: Office of Innovation and Improvement, U... pertaining to assessment technology standards. SUMMARY: The purpose of this RFI is to collect...

  15. Assessment of liver volume with spiral computerized tomography scanning: predicting liver volume by age and height

    Directory of Open Access Journals (Sweden)

    Madhu Sharma

    2016-07-01

    Conclusions: Liver volume is a reliable index of liver size and measurement of liver volume with spiral CT is useful method. Spiral CT can be utilized for measurement of liver volume for such purpose. [Int J Res Med Sci 2016; 4(7.000: 3020-3023

  16. QuEST: Qualifying Environmentally Sustainable Technologies, Volume 5

    Science.gov (United States)

    Lewis, Pattie

    2010-01-01

    This edition of the QuEST newsletter contains brief articles that discuss the NASA Technology Evaluation for Environmental Risk Mitigation (TEERM) program, and the importance of collaboration, efforts in materials management and substitution for coatings for launch structures, Low volatile organic compound (VOC) Coatings Field Testing, Non-Chrome Coating Systems, Life Cycle Corrosion Testing, Lead-Free Electronics Testing and Corn Based Depainting and efforts in Pollution Control in the area of Hypergolic Propellant Destruction Evaluation, efforts in development of alternative energy in particular Hydrogen Sensors, Energy and Water Management, and efforts in remediation in the removal of Polychlorinated Biphenyl (PCB) contamination

  17. QuEST: Qualifying Environmentally Sustainable Technologies. Volume 4

    Science.gov (United States)

    Lewis, Pattie L.

    2009-01-01

    In 2004, in one of their first collaborative efforts, Centro Para Prevencao da Poluicao (Portuguese Center for Pollution Prevention or C3P). teamed with Technology Evaluation for Environmental Risk Mitigation Principal Center (TEERM) and two Portuguese entities, TAP Portugal (Portuguese National Airline) and OGMA Indtistria Aeron utica de Portugal (Portuguese Aeronautics Industry), to target the reduction of hexavalent chromium, cadmium, and volatile organic compounds (VOCs) in aircraft maintenance operations. This project focused on two coating systems that utilize non-chrome pretreatments and low-VOC primers and topcoats.

  18. Cogeneration technology alternatives study. Volume 2: Industrial process characteristics

    Science.gov (United States)

    1980-01-01

    Information and data for 26 industrial processes are presented. The following information is given for each process: (1) a description of the process including the annual energy consumption and product production and plant capacity; (2) the energy requirements of the process for each unit of production and the detailed data concerning electrical energy requirements and also hot water, steam, and direct fired thermal requirements; (3) anticipated trends affecting energy requirements with new process or production technologies; and (4) representative plant data including capacity and projected requirements through the year 2000.

  19. Soft Computing in Information Communication Technology Volume 2

    CERN Document Server

    2012-01-01

    This book is a collection of the accepted papers concerning soft computing in information communication technology. The resultant dissemination of the latest research results, and the exchanges of views concerning the future research directions to be taken in this field makes the work of immense value to all those having an interest in the topics covered. The present book represents a cooperative effort to seek out the best strategies for effecting improvements in the quality and the reliability of Fuzzy Logic, Machine Learning, Cryptography, Pattern Recognition, Bioinformatics, Biomedical Engineering, Advancements in ICT.

  20. Technology Directions for the 21st Century. Volume 3

    Science.gov (United States)

    Crimi, Giles F.; Botta, Robert; Ditanna, Thomas; Verheggen, Henry; Stancati, Michael; Feingold, Harvey; Jacobs, Mark

    1996-01-01

    New technologies will unleash the huge capacity of fiber-optic cable to meet growing demands for bandwidth. Companies will continue to replace private networks with public network bandwidth-on-demand. Although asynchronous transfer mode (ATM) is the transmission technology favored by many, its penetration will be slower than anticipated. Hybrid networks - e.g., a mix of ATM, frame relay, and fast Ethernet - may predominate, both as interim and long-term solutions, based on factors such as availability, interoperability, and cost. Telecommunications equipment and services prices will decrease further due to increased supply and more competition. Explosive Internet growth will continue, requiring additional backbone transmission capacity and enhanced protocols, but it is not clear who will fund the upgrade. Within ten years, space-based constellations of satellites in Low Earth orbit (LEO) will serve mobile users employing small, low-power terminals. 'Little LEO's' will provide packet transmission services and geo-position determination. 'Big LEO's' will function as global cellular telephone networks, with some planning to offer video and interactive multimedia services. Geosynchronous satellites also are proposed for mobile voice grade links and high-bandwidth services. NASA may benefit from resulting cost reductions in components, space hardware, launch services, and telecommunications services.

  1. Assessing the impact of new technology on complex sociotechnical systems

    CSIR Research Space (South Africa)

    Oosthuizen, R

    2016-08-01

    Full Text Available African Journal of Industrial Engineering Month Year Vol __(_) pp 1-3 ASSESSING THE IMPACT OF NEW TECHNOLOGY ON COMPLEX SOCIOTECHNICAL SYSTEMS R. Oosthuizen & L. Pretorius Department of Engineering and Technology Management University of Pretoria...

  2. Dietary assessment in Africa: Integration with innovative technology ...

    African Journals Online (AJOL)

    Dietary assessment in Africa: Integration with innovative technology. ... African Journal of Food, Agriculture, Nutrition and Development ... an opportunity for exploring the benefits and general acceptance of using technology to improve health.

  3. Space Launch System Upper Stage Technology Assessment

    Science.gov (United States)

    Holladay, Jon; Hampton, Bryan; Monk, Timothy

    2014-01-01

    discussed in light of the various missions. For each mission there are several trajectory options and each will be discussed in terms of delta-v required and transit duration. Each propulsion system will be modeled, sized, and judged based on their applicability to the whole range of beyond LEO missions. Criteria for scoring will include the resulting dry mass of the stage, resulting propellant required, time to destination, and an assessment of key enabling technologies. In addition to the larger metrics, this paper will present the results of several coupled sensitivity studies. The ultimate goals of these tools and studies are to provide NASA with the most mass-, technology-, and cost-effective in-space stage for its future exploration missions.

  4. DoD Current State for Software Technology Readiness Assessments

    Science.gov (United States)

    2010-04-01

    DoD Current State for Software Technology Readiness Assessments Systems & Software Technology Conference April 2010 Cynthia Dion-Schwarz, Ph.D...DoD Current State for Software Technology Readiness Assessments 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d...public release; distribution unlimited 13. SUPPLEMENTARY NOTES Presented at the 22nd Systems and Software Technology Conference (SSTC), 26-29 April

  5. CONSUMPTION VOLUMES TECHNOLOGY OF ELECTRICITY AND HEAT BY DEPARTMENTS OF THE UNIVERSITY

    Directory of Open Access Journals (Sweden)

    O. M. Pshinko

    2015-01-01

    Full Text Available Purpose. Efficient use of natural energy resources is one of the priorities of the state policy in the sphere of universities and institutions of the Ministry of Education and Science of Ukraine. Besides search and development the new efficient and clean energy systems it is necessary to implement optimal management of the development and operation of existing facilities, reducing their energy costs. Purpose of this work is to develop consumption volume technology of electricity and heat by scientific departments of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan (DNURT for further finding the ways to reduce energy consumption. The problem is due to the specifics of University’s energy scheme. There is a difficulty for the installation of energy meters and data acquisition about their use in individual branches and structural units. At the same time it is impossible to assess qualitatively the energy position of scientific departments. Methodology. The method to determine the electricity and heat consumption for space heating of scientific departments at the university is based on «The intersectoral rules of electricity and heat energy for institutions and public sector organizations in Ukraine» and «Codes and regulations on rationing of fuel and heat energy for heating the residential buildings as well as for economic needs in Ukraine». Findings. Developed determining expenditure technology of electricity and heat for heating by scientific departments at the DNURT named after Academician V. Lazaryan allows obtaining data on energy consumption in individual units without direct measure and analyzing the effectiveness of energy saving technologies. Originality. It is represented by energy costs in the form of two components and these components are defined on the basis of the energy audit. This enables the energy inputs to implement energy efficiency measures in the research departments of the

  6. Expanding the applicability of Heallth Technology Assessments

    DEFF Research Database (Denmark)

    Draborg, Eva; Hansen, Helle Ploug

    2012-01-01

    external validity and the effectiveness of a technology in normal daily practice. SR and HTAs favors internal valid trials and thereby proofs of possible cause-effect relationship between a technology and outcomes but at the expense of the wider perspectives of a technology. HTA have a policy...

  7. Assessment of Ga2O3 technology

    Science.gov (United States)

    2016-09-15

    architecture [60]. ....................................................................... 10 Figure 5: Photograph of 4-inch diameter Ga2O3 wafer...breakdown voltages can provide orders of magnitude reduction in system size, cost and weight. Figure 4: A More-Electric Aircraft (MEA) architecture [60...Technology base is narrowly located in Japan . Mainstream technology. Czochralski • Mature technology base. • Crucible-free crystal growth

  8. Fort Drum integrated resource assessment. Volume 1, Executive summary

    Energy Technology Data Exchange (ETDEWEB)

    Dixon, D.R.; Armstrong, P.R.; Daellenbach, K.K.

    1993-09-01

    Some of the most difficult problems that a federal site has in reducing its energy consumption in a cost-effective manner revolve around understanding where the energy is being used, and what technologies could be employed to decrease the energy use. Many large federal sites have one or two meters to track electric energy use for several thousand buildings and numerous industrial processes. Even where meters are available on individual buildings or family housing units, the meters are not consistently read. When the federal energy manager has been able to identify high energy users, he or she may not have the background, training, or resources to determine the most cost-effective options for reducing this energy use. This can lead to selection of suboptimal projects that prevent the site from achieving the full life-cycle cost savings. The US Department of Energy (DOE) Federal Energy Management Program (FEMP), supported by the Pacific Northwest Laboratory (PNL), has developed a model program that provides a systematic approach to evaluating energy opportunities that (1) identifies the building groups and end uses that use the most energy (not just have the greatest energy-use intensity), and (2) evaluates the numerous options for retrofit or installation of new technology that will result in the selection of the most cost-effective technologies. In essence, this model program provides the federal energy manager with a roadmap to significantly reduce energy use in a planned, rational, cost-effective fashion that is not biased by the constraints of the typical funding sources available to federal sites. The results from this assessment process can easily be turned into a five- to ten-year energy management plan that identifies where to start and how to proceed in order to reach the mandated energy consumption targets.

  9. Cogeneration Technology Alternatives Study (CTAS). Volume 3: Industrial processes

    Science.gov (United States)

    Palmer, W. B.; Gerlaugh, H. E.; Priestley, R. R.

    1980-01-01

    Cogenerating electric power and process heat in single energy conversion systems rather than separately in utility plants and in process boilers is examined in terms of cost savings. The use of various advanced energy conversion systems are examined and compared with each other and with current technology systems for their savings in fuel energy, costs, and emissions in individual plants and on a national level. About fifty industrial processes from the target energy consuming sectors were used as a basis for matching a similar number of energy conversion systems that are considered as candidate which can be made available by the 1985 to 2000 time period. The sectors considered included food, textiles, lumber, paper, chemicals, petroleum, glass, and primary metals. The energy conversion systems included steam and gas turbines, diesels, thermionics, stirling, closed cycle and steam injected gas turbines, and fuel cells. Fuels considered were coal, both coal and petroleum based residual and distillate liquid fuels, and low Btu gas obtained through the on site gasification of coal. An attempt was made to use consistent assumptions and a consistent set of ground rules specified by NASA for determining performance and cost. Data and narrative descriptions of the industrial processes are given.

  10. Survey of biomass gasification. Volume III. Current technology and research

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-04-01

    This survey of biomass gasification was written to aid the Department of Energy and the Solar Energy Research Institute Biological and Chemical Conversion Branch in determining the areas of gasification that are ready for commercialization now and those areas in which further research and development will be most productive. Chapter 8 is a survey of gasifier types. Chapter 9 consists of a directory of current manufacturers of gasifiers and gasifier development programs. Chapter 10 is a sampling of current gasification R and D programs and their unique features. Chapter 11 compares air gasification for the conversion of existing gas/oil boiler systems to biomass feedstocks with the price of installing new biomass combustion equipment. Chapter 12 treats gas conditioning as a necessary adjunct to all but close-coupled gasifiers, in which the product is promptly burned. Chapter 13 evaluates, technically and economically, synthesis-gas processes for conversion to methanol, ammonia, gasoline, or methane. Chapter 14 compiles a number of comments that have been assembled from various members of the gasifier community as to possible roles of the government in accelerating the development of gasifier technology and commercialization. Chapter 15 includes recommendations for future gasification research and development.

  11. History of healthcare technology assessment in Japan.

    Science.gov (United States)

    Hisashige, Akinori

    2009-07-01

    There has been a rapid growth of healthcare technology assessment (HTA) activities among health service researchers and physicians in Japan in the younger generation since the mid-1980s. HTA has become visible since the Ministry of Health, Labor, and Welfare (MHLW) set up the several committees related to HTA in the late 1990s. The MHLW had to participate in regulatory and administrative reform, coping with the serious economic stagnation since 1991, following the economic recession in the 1980s. However, HTA has not been developed as expected. The most important failure is that the application of HTA to health policy has been neglected by the MHLW. Only application to clinical practice has been implemented by developing evidence-based clinical practice guidelines. The MHLW had the main aim of containing costs by reducing excess or useless healthcare services through guidelines, rather than to implement a radical reform. Without a central organization for HTA, several researchers have still continued to do HTA studies, but most researchers and physicians promoting HTA have been moved into diverse related areas. Ultimately, increasing efficiency may be the only way of reconciling rising demands for health care with public financing constraints. Therefore, the reconsideration and reorganization of HTA, which covers not only healthcare services but also the healthcare system as a whole, is becoming an urgent matter for healthcare reform.

  12. Life cycle assessment of emerging technologies

    DEFF Research Database (Denmark)

    Valsasina, Lucia; Pizzol, Massimo; Smetana, Sergiy;

    2017-01-01

    Abstract Milk is becoming a key food commodity as population grows and demand increases. The treatment of milk to extend its shelf life is thus an important step in avoiding losses and optimizing resource use. The drawbacks of the most common treatments for shelf stable milk are the loss of nutri......Abstract Milk is becoming a key food commodity as population grows and demand increases. The treatment of milk to extend its shelf life is thus an important step in avoiding losses and optimizing resource use. The drawbacks of the most common treatments for shelf stable milk are the loss...... shelf life. A life cycle assessment was performed comparing this emerging technology to the common thermal treatment: indirect ultra-high temperature sterilisation combined with non-aseptic homogenisation. The results show that high-pressure based processing has a lower environmental burden compared...... to the high-temperature based processing, already at pilot-scale, and this difference is primarily due to the lower electricity consumption. Additionally, upscaling considerations were made using power laws and scenario analysis to simulate future full-scale applications of UHPH. The upscaling shows...

  13. System Engineering Concept Demonstration, Technology Assessments. Volume 5

    Science.gov (United States)

    1992-12-01

    27 2.2.2.3. Imagesetters and film recorders .......................................................... 28...accessories, such as the calendar or calculator. Audio can be very effective in training applications. It can provide a soundtrack for video segments...2.2.2.3. Imagesetters and film recorders Although 300 dpi is sufficient for most business use, it falls short for real publishing use. When viewed

  14. Environmental control implications of generating electric power from coal. Technology status report. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    None

    1976-12-01

    This is the first in a series of reports evaluating environmental control technologies applicable to the coal-to-electricity process. The technologies are described and evaluated from an engineering and cost perspective based upon the best available information obtained from utility experience and development work in progress. Environmental control regulations and the health effects of pollutants are also reviewed. Emphasis is placed primarily upon technologies that are now in use. For SO/sub 2/ control, these include the use of low sulfur coal, cleaned coal, or flue-gas desulfurization systems. Electrostatic precipitators and fabric filters used for the control of particulate matter are analyzed, and combustion modifications for NO/sub x/ control are described. In each area, advanced technologies still in the development stage are described briefly and evaluated on the basis of current knowledge. Fluidized-bed combustion (FBC) is a near-term technology that is discussed extensively in the report. The potential for control of SO/sub 2/ and NO/sub x/ emissions by use of FBC is analyzed, as are the resulting solid waste disposal problems, cost estimates, and its potential applicability to electric utility systems. Volume II presents the detailed technology analyses complete with reference citations. This same material is given in condensed form in Volume I without references. A brief executive summary is also given in Volume I.

  15. Emerging Communication Technologies (ECT) Phase 2 Report. Volume 1; Main Report

    Science.gov (United States)

    Bastin, Gary L.; Harris, William G.; Chiodini, Robert; Nelson, Richard A.; Huang, PoTien; Kruhm, David A.

    2003-01-01

    The Emerging Communication Technology (ECT) project investigated three First Mile communication technologies in support of NASA s Second Generation Reusable Launch Vehicle (2nd Gen RLV), Orbital Space Plane, Advanced Range Technology Working Group (ARTWG) and the Advanced Spaceport Technology Working Group (ASTWG). These First Mile technologies have the purpose of interconnecting mobile users with existing Range Communication infrastructures. ECT was a continuation of the Range Information System Management (RISM) task started in 2002. RISM identified the three advance communication technologies investigated under ECT. These were Wireless Ethernet (Wi-Fi), Free Space Optics (FSO), and Ultra Wideband (UWB). Due to the report s size, it has been broken into three volumes: 1) Main Report 2) Appendices 3) UWB.

  16. Animal Science Technology. An Experimental Developmental Program. Volume II, Curriculum Course Outlines.

    Science.gov (United States)

    Brant, Herman G.

    This volume, the second of a two part evaluation report, is devoted exclusively to the presentation of detailed course outlines representing an Animal Science Technology curriculum. Arranged in 6 terms of study (2 academic years), outlines are included on such topics as: (1) Introductory Animal Science, (2) General Microbiology, (3) Zoonoses, (4)…

  17. Animal Science Technology. An Experimental Developmental Program. Volume I, Report of the Developmental Program.

    Science.gov (United States)

    Brant, Herman G.; And Others

    In 1961, administrative personnel at Delhi College in New York observed that formal training programs for animal science technicians were virtually nonexistant. Response to this apparent need resulted in the initiation of perhaps the first 2-year Animal Science Technology Program in the nation. This two-volume report is the result of an extensive…

  18. Rapid Technology Assessment Framework for Land Logistics

    Science.gov (United States)

    2015-03-01

    Economy, Environment, Politics SWOT Strengths, Weaknesses, Opportunities, Threats TRL Technology Readiness Level US United States WHO World Health...structures, processes • Contract management Capability Life -Cycle Management (in support of force modernisation and preparedness...commonly based on projections of the global meta-trends across the physical, social and technological environments. Such discussions are numerous

  19. Beyond checklists: toward an ethical-constructive technology assessment

    NARCIS (Netherlands)

    Kiran, Asle; Oudshoorn, Nelly E.J.; Verbeek, Peter P.C.C.

    2015-01-01

    While many technology assessments (TAs) formally conducted by TA organizations in Europe and the USA have examined the implications of new technologies for ‘quantifiable risks’ regarding safety, health or the environment, they have largely ignored the ethical implications of those technologies.

  20. Methodology of constructive technology assessment in health care

    NARCIS (Netherlands)

    Douma, Kirsten F.L.; Karsenberg, Kim; Hummel, Marjan J.M.; Bueno-de-Mesquita, Jolien M.; Harten, van Wim H.

    2007-01-01

    Objectives: Technologies in health care are evolving quickly, with new findings in the area of biotechnological and genetic research being published regularly. A health technology assessment (HTA) is often used to answer the question of whether the new technology should be implemented into clinical

  1. Decision Gate Process for Assessment of a Technology Development Portfolio

    Science.gov (United States)

    Kohli, Rajiv; Fishman, Julianna; Hyatt, Mark

    2012-01-01

    The NASA Dust Management Project (DMP) was established to provide technologies (to TRL 6 development level) required to address adverse effects of lunar dust to humans and to exploration systems and equipment, which will reduce life cycle cost and risk, and will increase the probability of sustainable and successful lunar missions. The technology portfolio of DMP consisted of different categories of technologies whose final product is either a technology solution in itself, or one that contributes toward a dust mitigation strategy for a particular application. A Decision Gate Process (DGP) was developed to assess and validate the achievement and priority of the dust mitigation technologies as the technologies progress through the development cycle. The DGP was part of continuous technology assessment and was a critical element of DMP risk management. At the core of the process were technology-specific criteria developed to measure the success of each DMP technology in attaining the technology readiness levels assigned to each decision gate. The DGP accounts for both categories of technologies and qualifies the technology progression from technology development tasks to application areas. The process provided opportunities to validate performance, as well as to identify non-performance in time to adjust resources and direction. This paper describes the overall philosophy of the DGP and the methodology for implementation for DMP, and describes the method for defining the technology evaluation criteria. The process is illustrated by example of an application to a specific DMP technology.

  2. Assessing volume of accelerometry data for reliability in preschool children.

    Science.gov (United States)

    Hinkley, Trina; O'Connell, Eoin; Okely, Anthony D; Crawford, David; Hesketh, Kylie; Salmon, Jo

    2012-12-01

    This study examines what volume of accelerometry data (h·d) is required to reliably estimate preschool children's physical activity and whether it is necessary to include weekday and weekend data. Accelerometry data from 493 to 799 (depending on wear time) preschool children from the Melbourne-based Healthy Active Preschool Years study were used. The percentage of wear time each child spent in total (light-vigorous) physical activity was the main outcome. Hourly increments of daily data were analyzed. t-tests, controlling for age and clustering by center of recruitment, assessed the differences between weekday and weekend physical activity. Intraclass correlation coefficients estimated reliability for an individual day. Spearman-Brown prophecy formula estimated the number of days required to reach reliability estimates of 0.7, 0.8, and 0.9. The children spent a significantly greater percentage of time being physically active on weekend compared with weekdays regardless of the minimum number of hours included (t = 12.49-16.76, P 8 d of data were required to reach a reliability estimate of 0.7 with 10 or more hours of data per day; 3.3-3.4 d were required to meet the same reliability estimate for days with 7 h of data. Future studies should ensure they include the minimum amount of data (hours per day and number of days) as identified in this study to meet at least a 0.7 reliability level and should report the level of reliability for their study. In addition to weekdays, at least one weekend day should be included in analyses to reliably estimate physical activity levels for preschool children.

  3. New Modes of Constructive Technology Assessment for Developing Countries

    DEFF Research Database (Denmark)

    Christensen, David; Remmen, Arne

    . Technology assessment helps assess the potential positive or negative impacts following in the wake of introducing a new technology of any conceivable type. It has an overall philosophy of reducing the cost of learning in society’s handling of new technologies, anticipating impacts and feeding these insights...... in influencing technological change. In developing countries, technology assessment has received relatively little attention, but recent developments have expressed a ‘call-to-arms’ to tailor flexible approaches by ensuring the involvement of diverse stakeholders and citizens and continual learning among......An old piece of conventional wisdom warns against unsustainable ‘white elephants’ in any attempts at international transferal, adoption or development of technologies in developing countries. After more than half a century of failed attempts to introduce technologies in such settings mostly through...

  4. Assessments of emerging science and technologies: Mapping the landscape

    NARCIS (Netherlands)

    Forsberg, E.M.; Thorstensen, E.; Nielsen, R.O.; Bakker, de E.

    2014-01-01

    This paper presents comparative work from the EST-Frame project on technology appraisal. It focuses on studies of 'advisory domains' (more or less distinct traditions for assessment of technologies, such as risk analysis, foresight and ethical assessments). The purpose of the study was to increase t

  5. Principles of sustainability science to assess alternative energy technologies

    CSIR Research Space (South Africa)

    Brent, AC

    2009-04-01

    Full Text Available , adaptive capacity, and complexity of social-ecological systems to assess the potential of such technologies for increasing the carrying capacity and improving the resilience of social-ecological systems, or to assess the resilience of the technological...

  6. Oak Ridge K-25 Site Technology Logic Diagram. Volume 3, Technology evaluation data sheets; Part B, Remedial action, robotics/automation, waste management

    Energy Technology Data Exchange (ETDEWEB)

    Fellows, R.L. [ed.

    1993-02-26

    The Oak Ridge K-25 Technology Logic Diagram (TLD), a decision support tool for the K-25 Site, was developed to provide a planning document that relates environmental restoration (ER) and waste management (WN) problems at the Oak Ridge K-25 Site. The TLD technique identifies the research necessary to develop these technologies to a state that allows for technology transfer and application to waste management, remediation, decontamination, and decommissioning activities. The TLD consists of four separate volumes-Vol. 1, Vol. 2, Vol. 3A, and Vol. 3B. Volume 1 provides introductory and overview information about the TLD. Volume 2 contains logic diagrams. Volume 3 has been divided into two separate volumes to facilitate handling and use. This volume 3 B provides the Technology Evaluation Data Sheets (TEDS) for ER/WM activities (Remedial Action Robotics and Automation, Waste Management) that are referenced by a TEDS code number in Vol. 2 of the TLD. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than each technology in Vol. 2. The TEDS are arranged alphanumerically by the TEDS code number in the upper right corner of each data sheet. Volume 3 can be used in two ways: (1) technologies that are identified from Vol. 2 can be referenced directly in Vol. 3 by using the TEDS codes, and (2) technologies and general technology areas (alternatives) can be located in the index in the front of this volume.

  7. Robotic Technology: An Assessment and Forecast,

    Science.gov (United States)

    1984-07-01

    resources of the Milan Polytechnic has been the Laboratorlo per Ricerche de Dinamica dei Sistemi e di Bioingogneria (LADSEB), a national institute for...robotic assembly. Due to the combination of large volume production and pre-existing familiarity with robots# the automotive industry is likely to be an

  8. Technology assessment of PACS in Osaka University Hospital.

    Science.gov (United States)

    Inamura, K; Satoh, K; Kondoh, H; Mori, Y; Kozuka, T

    1994-05-01

    This paper describes a methodology of PACS technology assessment and gives examples of the results of measurement of 24 items of PACS-related situations of image diagnosis systems in Osaka University Hospital before a PACS is installed. These data are to be compared with the data which will be measured after PACS is installed in the new Osaka University Hospital, in order to complete our technology assessment. We propose common variables, units, and conditions of measurement, in order to establish a standard method of data comparison between before and after PACS installation in hospitals at large. We designed our PACS taking technology assessment into account. We do not stop the technology assessment at the efficacy evaluation, because PACS must be more than a tool for radiological practice. We extend the technology assessment into the effectiveness evaluation, so that PACS is a part of radiological practice itself, and diagnostic accuracy, economy and efficiency are the results of PACS operation.

  9. Viability Assessment of a Repository at Yucca Mountain. Volume 1: Introduction and Site Characteristics

    Energy Technology Data Exchange (ETDEWEB)

    None

    1998-12-01

    This first volume contains an introduction to the viability assessment, including the purpose, scope, waste forms, technical challenges, an historical perspective, regulatory framework, management of the repository, technical components, preparations for the license application, and repository milestones after the assessment. The second part of this first volume addresses characteristics of the Yucca Mountain site.

  10. Improving Software Guidance for Technology Readiness Assessments (TRA)

    Science.gov (United States)

    2010-04-29

    Systems & Software Technology Conference Improving Software Guidance for Technology Readiness Assessments (TRA) 29 April 2010 Mike Nicol...APR 2010 2. REPORT TYPE 3. DATES COVERED 00-00-2010 to 00-00-2010 4. TITLE AND SUBTITLE Improving Software Guidance for Technology Readiness...Presented at the 22nd Systems and Software Technology Conference (SSTC), 26-29 April 2010, Salt Lake City, UT. 14. ABSTRACT 15. SUBJECT TERMS

  11. Assessing climate change mitigation technology interventions by international institutions

    DEFF Research Database (Denmark)

    de Coninck, Heleen; Puig, Daniel

    2015-01-01

    Accelerating the international use of climate mitigation technologies is key if effortsto curb climate change are to succeed, especially in developing countries, where weakdomestic technological innovation systems constrain the uptake of climate change mitigationtechnologies. Several...... intergovernmental agencies have set up specific programmes to supportthe diffusion of climate mitigation technologies. Using a simplified technological innovationsystem-based framework, this paper aims to systematically review these programmes, with thedual aim of assessing their collective success in promoting...

  12. Distributed technologies in California's energy future: A preliminary report. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    Christensen, M.; Craig, P.; McGuire, C.B.; Simmons, M. (eds.)

    1977-09-01

    The chapters in Volume 2 of Distributed Energy Systems in California's Future are: Environmental Impacts of Alternative Energy Technologies for California; Land Use Configurations and the Utilization of Distributive Energy Technology; Land Use Implications of a Dispersed Energy Path; Belief, Behavior, and Technologies as Driving Forces in Transitional Stages--The People Problem in Dispersed Energy Futures; Development of an Energy Attitude Survey; Interventions to Influence Firms Toward the Adoption of ''Soft'' Energy Technology; The Entry of Small Firms into Distributed Technology Energy Industries; Short-Term Matching of Supply and Demand in Electrical Systems with Renewable Sources; Vulnerability of Renewable Energy Systems; and District Heating for California.

  13. Assessment of technology generating institutions in biotechnology ...

    African Journals Online (AJOL)

    STORAGESEVER

    2009-05-18

    May 18, 2009 ... biotechnology innovation system of South-Eastern. Nigeria. E. N. Ajani, M. C. ... Agricultural biotechnology provides new technological tools and aims to ..... constraints include poor fringe benefit to researchers ( x. = 2.90) ...

  14. Assessment of volume depletion in children with malaria.

    Directory of Open Access Journals (Sweden)

    Timothy Planche

    2004-10-01

    Full Text Available BACKGROUND: The degree of volume depletion in severe malaria is currently unknown, although knowledge of fluid compartment volumes can guide therapy. To assist management of severely ill children, and to test the hypothesis that volume changes in fluid compartments reflect disease severity, we measured body compartment volumes in Gabonese children with malaria. METHODS AND FINDINGS: Total body water volume (TBW and extracellular water volume (ECW were estimated in children with severe or moderate malaria and in convalescence by tracer dilution with heavy water and bromide, respectively. Intracellular water volume (ICW was derived from these parameters. Bioelectrical impedance analysis estimates of TBW and ECW were calibrated against dilution methods, and bioelectrical impedance analysis measurements were taken daily until discharge. Sixteen children had severe and 19 moderate malaria. Severe childhood malaria was associated with depletion of TBW (mean [SD] of 37 [33] ml/kg, or 6.7% [6.0%] relative to measurement at discharge. This is defined as mild dehydration in other conditions. ECW measurements were normal on admission in children with severe malaria and did not rise in the first few days of admission. Volumes in different compartments (TBW, ECW, and ICW were not related to hyperlactataemia or other clinical and laboratory markers of disease severity. Moderate malaria was not associated with a depletion of TBW. CONCLUSIONS: Significant hypovolaemia does not exacerbate complications of severe or moderate malaria. As rapid rehydration of children with malaria may have risks, we suggest that fluid replacement regimens should aim to correct fluid losses over 12-24 h.

  15. Sustainability assessment of advanced wastewater treatment technologies

    DEFF Research Database (Denmark)

    Høibye, Linda; Clauson-Kaas, Jes; Wenzel, Henrik

    2008-01-01

    with advanced oxidation. The technical assessment is based on 12 hazardous substances comprising heavy metals, organic pollutants, endocrine disruptors as well as pathogenic microorganisms. The environmental assessment is performed by life cycle assessment (LCA) comprising 9 of the specific hazardous substances...

  16. Challenges for Information Technology Supporting Educational Assessment

    Science.gov (United States)

    Webb, M.; Gibson, D.; Forkosh-Baruch, A.

    2013-01-01

    This article examines the scope for IT-enabled assessments to serve simultaneously both learners and the enterprise of education. The article proposes ways of combining frameworks that come from two different perspectives: 1) a conceptual approach to assessment design for computerized assessment based on evidence-centred design (ECD) and 2) a…

  17. Review on early technology assessments of nanotechnologies in oncology.

    Science.gov (United States)

    Retèl, Valesca P; Hummel, Marjan J M; van Harten, Wim H

    2009-12-01

    Nanotechnology is expected to play an increasingly important role in the diagnostics, prognostics, and management of targeted cancer treatments. While papers have described promising results for nanotechnology in experimental settings, the translation of fundamental research into clinical applications has yet to be widely adopted. In future, policy makers will need to anticipate new developments for clinical implementation and introduce technology assessments. Here we present an overview of the literature on the technology assessments that have already been undertaken on early stage nanotechnology in cancer care, with particular emphasis placed on clinical efficacy, efficiency, logistics, patient-related features and technology dynamics. Owing to the current stage of development of most nanotechnologies, we found only a limited number of publications describing the application of either Health Technology Assessment (HTA) or Constructive Technology Assessment (CTA). In spite of the promising conclusions of most papers concerning the benefits of clinical implementation, actual clinically relevant applications were rarely encountered, and so far only a few publications report application of systematic forms of technology assessment. Most articles consider aspects of environmental safety, regulation and ethics, often mentioning the need to investigate such issues more thoroughly. Evaluation of financial and organizational aspects is often missing. In order to obtain a realistic perspective on the translation and implementation process there is a need for a broad and systematic evaluation of nanotechnologies at early stages of development. Assessment methods taking technology dynamics into account, such as Constructive Technology Assessment (CTA) should be considered for evaluation purposes.

  18. Preliminary environmental assessment for the Satellite Power System (SPS). Revision 1. Volume 2. Detailed assessment

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    The Department of Energy (DOE) is considering several options for generating electrical power to meet future energy needs. The satellite power system (SPS), one of these options, would collect solar energy through a system of satellites in space and transfer this energy to earth. A reference system has been described that would convert the energy to microwaves and transmit the microwave energy via directive antennas to large receiving/rectifying antennas (rectennas) located on the earth. At the rectennas, the microwave energy would be converted into electricity. The potential environmental impacts of constructing and operating the satellite power system are being assessed as a part of the Department of Energy's SPS Concept Development and Evaluation Program. This report is Revision I of the Preliminary Environmental Assessment for the Satellite Power System published in October 1978. It refines and extends the 1978 assessment and provides a basis for a 1980 revision that will guide and support DOE recommendations regarding future SPS development. This is Volume 2 of two volumes. It contains the technical detail suitable for peer review and integrates information appearing in documents referenced herein. The key environmental issues associated with the SPS concern human health and safety, ecosystems, climate, and electromagnetic systems interactions. In order to address these issues in an organized manner, five tasks are reported: (I) microwave-radiation health and ecological effects; (II) nonmicrowave health and ecological effectss; (III) atmospheric effects; (IV) effects on communication systems due to ionospheric disturbance; and (V) electromagnetic compatibility. (WHK)

  19. Oil and gas technology transfer activities and potential in eight major producing states. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    1993-07-01

    In 1990, the Interstate Oil and Gas Compact Commission (the Compact) performed a study that identified the structure and deficiencies of the system by which oil and gas producers receive information about the potential of new technologies and communicate their problems and technology needs back to the research community. The conclusions of that work were that major integrated companies have significantly more and better sources of technology information than independent producers. The majors also have significantly better mechanisms for communicating problems to the research and development (R&D) community. As a consequence, the Compact recommended analyzing potential mechanisms to improve technology transfer channels for independents and to accelerate independents acceptance and use of existing and emerging technologies. Building on this work, the Compact, with a grant from the US Department Energy, has reviewed specific technology transfer organizations in each of eight major oil producing states to identify specific R&D and technology transfer organizations, characterize their existing activities, and identify potential future activities that could be performed to enhance technology transfer to oil and gas producers. The profiles were developed based on information received from organizations,follow-up interviews, site visit and conversations, and participation in their sponsored technology transfer activities. The results of this effort are reported in this volume. In addition, the Compact has also developed a framework for the development of evaluation methodologies to determine the effectiveness of technology transfer programs in performing their intended functions and in achieving desired impacts impacts in the producing community. The results of that work are provided in a separate volume.

  20. Using Task Data in Diagnostic Radiology. Research Report No. 8. Volume 2. Curriculum Objectives for Radiologic Technology.

    Science.gov (United States)

    Gilpatrick, Eleanor; Gullion, Christina

    This volume is the result of the application of the Health Services Mobility Study (HSMS) curriculum design method in radiologic technology and is presented in conjunction with volume 1, which reports the task analysis results. Volume 2 contains job-related behavioral curriculum objectives for the aide, technician, and technologist levels in…

  1. Coal liquefaction: A research and development needs assessment: Final report, Volume II

    Energy Technology Data Exchange (ETDEWEB)

    Schindler, H.D.; Burke, F.P.; Chao, K.C.; Davis, B.H.; Gorbaty, M.L.; Klier, K.; Kruse, C.W.; Larsen, J.W.; Lumpkin, R.E.; McIlwain, M.E.; Wender, I.; Stewart, N.

    1989-03-01

    Volume II of this report on an assessment of research needs for coal liquefaction contains reviews of the five liquefaction technologies---direct, indirect, pyrolysis, coprocessing, and bioconversion. These reviews are not meant to be encyclopedic; several outstanding reviews of liquefaction have appeared in recent years and the reader is referred to these whenever applicable. Instead, these chapters contain reviews of selected topics that serve to support the panel's recommendations or to illustrate recent accomplishments, work in progress, or areas of major research interest. At the beginning of each of these chapters is a brief introduction and a summary of the most important research recommendations brought out during the panel discussions and supported by the material presented in the review. A review of liquefaction developments outside the US is included. 594 refs., 100 figs., 60 tabs.

  2. State Assessment and Testing Programs: An Annotated ERIC Bibliography. Volume I: General References. Volume II: Individual State Programs.

    Science.gov (United States)

    Porter, Deborah Elena; Wildemuth, Barbara

    There is a growing body of literature in the ERIC data base pertaining to state educational assessment and testing programs. Volume I of this bibliography includes abstracts of 39 documents and journal articles describing the design and implementation of programs, as well as the technical and political issues which have been addressed by the…

  3. Technology Assessment for the Advanced Life Detector

    Science.gov (United States)

    1988-01-29

    fulfill all the requirements of the draft Joint Services Operational Requtrement ( JSOR ). Three of the devices idantified are recommended for furtker...potential for mneting the requirements of the draft JSOR : 3 a. The device will be capable of determining heart and respiratory rates. b. Weight and volume...draft JSOR , although it is not certain at this time that the wrist unit can be made small enough to be practical for issue to all combatants. b

  4. The Contribution of Health Technology Assessment, Health Needs Assessment, and Health Impact Assessment to the Assessment and Translation of Technologies in the Field of Public Health Genomics

    DEFF Research Database (Denmark)

    Rosenkotter, N.; Vondeling, H.; Blancquaert, I.

    2011-01-01

    or to identify infrastructural needs. HIA delivers information on the impact of technologies in a wider scope and promotes informed decision making. HTA, HNA and HIA provide a partly overlapping and partly unique set of methodologies and infrastructure for the translation and assessment of genomic health...... into the impact on public health and health care practice of those technologies that are actually introduced. This paper aims to give an overview of the major assessment instruments in public health [ health technology assessment (HTA), health needs assessment (HNA) and health impact assessment (HIA)] which could......The European Union has named genomics as one of the promising research fields for the development of new health technologies. Major concerns with regard to these fields are, on the one hand, the rather slow and limited translation of new knowledge and, on the other hand, missing insights...

  5. Cardiovascular simulator improvement: pressure versus volume loop assessment.

    Science.gov (United States)

    Fonseca, Jeison; Andrade, Aron; Nicolosi, Denys E C; Biscegli, José F; Leme, Juliana; Legendre, Daniel; Bock, Eduardo; Lucchi, Julio Cesar

    2011-05-01

    This article presents improvement on a physical cardiovascular simulator (PCS) system. Intraventricular pressure versus intraventricular volume (PxV) loop was obtained to evaluate performance of a pulsatile chamber mimicking the human left ventricle. PxV loop shows heart contractility and is normally used to evaluate heart performance. In many heart diseases, the stroke volume decreases because of low heart contractility. This pathological situation must be simulated by the PCS in order to evaluate the assistance provided by a ventricular assist device (VAD). The PCS system is automatically controlled by a computer and is an auxiliary tool for VAD control strategies development. This PCS system is according to a Windkessel model where lumped parameters are used for cardiovascular system analysis. Peripheral resistance, arteries compliance, and fluid inertance are simulated. The simulator has an actuator with a roller screw and brushless direct current motor, and the stroke volume is regulated by the actuator displacement. Internal pressure and volume measurements are monitored to obtain the PxV loop. Left chamber internal pressure is directly obtained by pressure transducer; however, internal volume has been obtained indirectly by using a linear variable differential transformer, which senses the diaphragm displacement. Correlations between the internal volume and diaphragm position are made. LabVIEW integrates these signals and shows the pressure versus internal volume loop. The results that have been obtained from the PCS system show PxV loops at different ventricle elastances, making possible the simulation of pathological situations. A preliminary test with a pulsatile VAD attached to PCS system was made.

  6. 5. annual clean coal technology conference: powering the next millennium. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    The Fifth Annual Clean Coal Technology Conference focuses on presenting strategies and approaches that will enable clean coal technologies to resolve the competing, interrelated demands for power, economic viability, and environmental constraints associated with the use of coal in the post-2000 era. The program addresses the dynamic changes that will result from utility competition and industry restructuring, and to the evolution of markets abroad. Current projections for electricity highlight the preferential role that electric power will have in accomplishing the long-range goals of most nations. Increase demands can be met by utilizing coal in technologies that achieve environmental goals while keeping the cost- per-unit of energy competitive. Results from projects in the DOE Clean Coal Technology Demonstration Program confirm that technology is the pathway to achieving these goals. The industry/government partnership, cemented over the past 10 years, is focused on moving the clean coal technologies into the domestic and international marketplaces. The Fifth Annual Clean Coal Technology Conference provides a forum to discuss these benchmark issues and the essential role and need for these technologies in the post-2000 era. This volume contains technical papers on: advanced coal process systems; advanced industrial systems; advanced cleanup systems; and advanced power generation systems. In addition, there are poster session abstracts. Selected papers from this proceedings have been processed for inclusion in the Energy Science and Technology database.

  7. A Novel Technology for Measurements of Dielectric Properties of Extremely Small Volumes of Liquids

    Directory of Open Access Journals (Sweden)

    Wei-Na Liu

    2016-01-01

    Full Text Available A high sensitivity sensor for measurement radio frequency (RF dielectric permittivity of liquids is described. Interference is used and parasitic effects are cancellation, which makes the sensor can catch weak signals caused by liquids with extremely small volumes. In addition, we present the relationship between transmission coefficient and permittivity of liquids under test (LUT. Using this sensor, quantitative measurements of the dielectric properties at 5.8 GHz are demonstrated of LUTs. Experiments show that the proposed method only requires the volume of 160 nanoliters for liquids. Therefore, the technology can be used for RF spectroscopic analysis of biological samples and extremely precious liquids.

  8. New Modes of Constructive Technology Assessment for Developing Countries

    DEFF Research Database (Denmark)

    Christensen, David; Remmen, Arne

    by a product or process in a developing country. On the other hand are those who design, develop and promote the technological solution. If the latter group is to follow the call for proactively taking in socio-cultural and user knowledge, what methods may be employed? This paper revisits the literature....... Technology assessment helps assess the potential positive or negative impacts following in the wake of introducing a new technology of any conceivable type. It has an overall philosophy of reducing the cost of learning in society’s handling of new technologies, anticipating impacts and feeding these insights...... universities, NGO’s, firms and users/citizens. In addressing this ‘call-to-arms’, this paper: ‐ Identifies how technology assessment principles may be brought into new decision-making arenas outside of its traditional application area of e.g. parliamentary governance systems. R evisits the technology...

  9. Y-12 Plant Remedial Action technology logic diagram. Volume I: Technology evaluation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    The Y-12 Plant Remedial Action Program addresses remediation of the contaminated groundwater, surface water and soil in the following areas located on the Oak Ridge Reservation: Chestnut Ridge, Bear Creek Valley, the Upper and Lower East Fork Popular Creek Watersheds, CAPCA 1, which includes several areas in which remediation has been completed, and CAPCA 2, which includes dense nonaqueous phase liquid wells and a storage facility. There are many facilities within these areas that are contaminated by uranium, mercury, organics, and other materials. This Technology Logic Diagram identifies possible remediation technologies that can be applied to the soil, water, and contaminants for characterization, treatment, and waste management technology options are supplemented by identification of possible robotics or automation technologies. These would facilitate the cleanup effort by improving safety, of remediation, improving the final remediation product, or decreasing the remediation cost. The Technology Logic Diagram was prepared by a diverse group of more than 35 scientists and engineers from across the Oak Ridge Reservation. Most are specialists in the areas of their contributions. 22 refs., 25 tabs.

  10. Innovative and Alternative Technology Assessment Manual

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-02-01

    This four chapter, six appendix manual presents the procedures and methodology as well as the baseline costs and energy information necessary for the analysis and evaluation of innovative and alternative technology applications submitted for federal grant assistance under the innovative and alternative technology provisions of the Clean Water Act of 1977. The manual clarifies and interprets the intent of Congress and the Environmental Protection Agency in carrying out the mandates of the innovative and alternative provisions of the Clean Water Act of 1977. [DJE 2005

  11. LNG vehicle technology, economics, and safety assessment

    Science.gov (United States)

    Powars, Charles A.; Moyer, Carl B.; Lowell, Douglas D.

    1994-02-01

    Liquid natural gas (LNG) is an attractive transportation fuel because of its high heating value and energy density (i.e., Btu/lb. and Btu/gal.), clean burning characteristics, relatively low cost ($/Btu), and domestic availability. This research evaluated LNG vehicle and refueling system technology, economics, and safety. Prior and current LNG vehicle projects were studied to identify needed technology improvements. Life-cycle cost analyses considered various LNG vehicle and fuel supply options. Safety records, standards, and analysis methods were reviewed. The LNG market niche is centrally fueled heavy-duty fleet vehicles with high fuel consumption. For these applications, fuel cost savings can amortize equipment capital costs.

  12. Biomedical Technology Assessment The 3Q Method

    CERN Document Server

    Weinfurt, Phillip

    2010-01-01

    Evaluating biomedical technology poses a significant challenge in light of the complexity and rate of introduction in today's healthcare delivery system. Successful evaluation requires an integration of clinical medicine, science, finance, and market analysis. Little guidance, however, exists for those who must conduct comprehensive technology evaluations. The 3Q Method meets these present day needs. The 3Q Method is organized around 3 key questions dealing with 1) clinical and scientific basis, 2) financial fit and 3) strategic and expertise fit. Both healthcare providers (e.g., hospitals) an

  13. 20 Years of Technology and Language Assessment in "Language Learning & Technology"

    Science.gov (United States)

    Chapelle, Carol A.; Voss, Erik

    2016-01-01

    This review article provides an analysis of the research from the last two decades on the theme of technology and second language assessment. Based on an examination of the assessment scholarship published in "Language Learning & Technology" since its launch in 1997, we analyzed the review articles, research articles, book reviews,…

  14. 20 Years of Technology and Language Assessment in "Language Learning & Technology"

    Science.gov (United States)

    Chapelle, Carol A.; Voss, Erik

    2016-01-01

    This review article provides an analysis of the research from the last two decades on the theme of technology and second language assessment. Based on an examination of the assessment scholarship published in "Language Learning & Technology" since its launch in 1997, we analyzed the review articles, research articles, book reviews,…

  15. Superconducting Technology Assessment (NSA, Office of Corporate Assessments)

    Data.gov (United States)

    Networking and Information Technology Research and Development, Executive Office of the President — The government, and particularly NSA, has a continuing need for ever-increasing computational power. The Agency is concerned about projected limitations of...

  16. Lamb Wave Assessment of Fiber Volume Fraction in Composites

    Science.gov (United States)

    Seale, Michael D.; Smith, Barry T.; Prosser, W. H.; Zalameda, Joseph N.

    1998-01-01

    Among the various techniques available, ultrasonic Lamb waves offer a convenient method of examining composite materials. Since the Lamb wave velocity depends on the elastic properties of a material, an effective tool exists to evaluate composites by measuring the velocity of these waves. Lamb waves can propagate over long distances and are sensitive to the desired in-plane elastic properties of the material. This paper discusses a study in which Lamb waves were used to examine fiber volume fraction variations of approximately 0.40-0.70 in composites. The Lamb wave measurements were compared to fiber volume fractions obtained from acid digestion tests. Additionally, a model to predict the fiber volume fraction from Lamb wave velocity values was evaluated.

  17. Technology assessments in transportation: survey of recent literature

    Energy Technology Data Exchange (ETDEWEB)

    LaBelle, S.J.

    1980-03-01

    A survey and an evaluation of recent studies of transportation systems done in a technology-assessment framework were undertaken as the basis for a detailed statement of work for a US Department of Energy technology assessment of transportation energy-conservation strategies. Several bibliographies were searched and numerous professionals in the field of technology assessment were contacted regarding current work. Detailed abstracts were prepared for studies judged to be sufficiently broad in coverage of impacts assessed, yet detailed in coverage of all or part of the nation's transportation systems. Some studies were rich in data but not comprehensive in their analytical approach; brief abstracts were prepared for these. An explanation of the criteria used to screen the studies, as well as abstracts of 37 reports, are provided in this compendium of transportation-technology-assessment literature.

  18. Fostering and Assessing Creativity in Technology Education

    Science.gov (United States)

    Buelin-Biesecker, Jennifer Katherine

    2012-01-01

    This study compared the creative outcomes in student work resulting from two pedagogical approaches to creative problem solving activities. A secondary goal was to validate the Consensual Assessment Technique (CAT) as a means of assessing creativity. Linear models for problem solving and design processes serve as the current paradigm in classroom…

  19. Assessment of Technology for Information Services Planning

    Science.gov (United States)

    1979-08-01

    organi- zation, and external services (external timesharing and turnkey computer systems). Areas of impact are specific to the organization. The...timesharing vendors, changing services turnkey systems - potential and problems impacts and trends o distributed data processing technology needed...includes credit cards, automobile loans, personal and real estate loans, and leasing . Service improvements would aim at expediting credit review, payment

  20. SU-F-207-06: CT-Based Assessment of Tumor Volume in Malignant Pleural Mesothelioma

    Energy Technology Data Exchange (ETDEWEB)

    Qayyum, F; Armato, S; Straus, C; Husain, A; Vigneswaran, W; Kindler, H [The University of Chicago, Chicago, IL (United States)

    2015-06-15

    Purpose: To determine the potential utility of computed tomography (CT) scans in the assessment of physical tumor bulk in malignant pleural mesothelioma patients. Methods: Twenty-eight patients with malignant pleural mesothelioma were used for this study. A CT scan was acquired for each patient prior to surgical resection of the tumor (median time between scan and surgery: 27 days). After surgery, the ex-vivo tumor volume was measured by a pathologist using a water displacement method. Separately, a radiologist identified and outlined the tumor boundary on each CT section that demonstrated tumor. These outlines then were analyzed to determine the total volume of disease present, the number of sections with outlines, and the mean volume of disease per outlined section. Subsets of the initial patient cohort were defined based on these parameters, i.e. cases with at least 30 sections of disease with a mean disease volume of at least 3mL per section. For each subset, the R- squared correlation between CT-based tumor volume and physical ex-vivo tumor volume was calculated. Results: The full cohort of 28 patients yielded a modest correlation between CT-based tumor volume and the ex-vivo tumor volume with an R-squared value of 0.66. In general, as the mean tumor volume per section increased, the correlation of CT-based volume with the physical tumor volume improved substantially. For example, when cases with at least 40 CT sections presenting a mean of at least 2mL of disease per section were evaluated (n=20) the R-squared correlation increased to 0.79. Conclusion: While image-based volumetry for mesothelioma may not generally capture physical tumor volume as accurately as one might expect, there exists a set of conditions in which CT-based volume is highly correlated with the physical tumor volume. SGA receives royalties and licensing fees through the University of Chicago for computer-aided diagnosis technology.

  1. Screening assessment and requirements for a comprehensive assessment: Volume 1, Draft. Columbia River comprehensive impact assessment

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-04-01

    To evaluate the impact to the Columbia River from the Hanford Site-derived contaminants, the U.S. Department of Energy, U.S. Environmental Protection Agency, and Washington State Department of Ecology initiated a study referred to as the Columbia River Comprehensive Impact Assessment (CRCIA). To address concerns about the scope and direction of CRCIA as well as enhance regulator, tribal, stockholder, and public involvement, the CRCIA Management Team was formed in August 1995. The Team agreed to conduct CRCIA using a phased approach. The initial phase, includes two components: 1) a screening assessment to evaluate the potential impact to the river, resulting from current levels of Hanford-derived contaminants in order to support decisions on Interim Remedial Measures, and 2) a definition of the essential work remaining to provide an acceptable comprehensive river impact assessment. The screening assessment is described in Part I of this report. The essential work remaining is Part II of this report. The objective of the screening assessment is to identify areas where the greatest potential exists for adverse effects on humans or the environment. Part I of this report discusses the scope, technical approach, and results of the screening assessment. Part II defines a new paradigm for predecisional participation by those affected by Hanford cleanup decisions.

  2. Using technology in assessing integrated science and mathematics learning

    Science.gov (United States)

    Berlin, Donna F.; White, Arthur L.

    1995-03-01

    Drawing from current models, research, and science and mathematics education reform documents, this article first defines and/or delimits three broad domains of education: integrated school science and mathematics, assessment, and technology. Based upon this three-tiered discussion, a list of characteristics is then distilled to guide in the development of assessment for integrated school science and mathematics using technology. Two integrated school science and mathematics activities are provided to illustrate the alignment of instruction and assessment and the systematic integration of technology into both.

  3. Proceedings of the environmental technology through industry partnership conference. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    Kothari, V.P.

    1995-10-01

    The overall objective of this conference was to review the latest environmental and waste management technologies being developed under the sponsorship of METC. The focus of this conference was also to address the accomplishments and barriers affecting private sector, and lay the groundwork for future technology development initiatives and opportunities. 26 presentations were presented in: Mixed waste characterization, treatment, and disposal; Contaminant plume containment and remediation; and Decontamination and decommissioning. In addition there were 10 Focus Area presentations, 31 Poster papers covering all Focus Areas, and two panel discussions on: Mixed waste characterization, treatment, and disposal issues; and the Application, evaluation, and acceptance of in-situ and ex-situ plume remediation technologies. Volume 2 contains 16 papers in a poster session and 8 papers in the contaminant plume containment and remediation and landfill stabilization Focus Areas. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

  4. Systems Engineering Technology Readiness Assessment of Hybrid-Electric Technologies for Tactical Wheeled Vehicles

    Science.gov (United States)

    2014-09-01

    Department of Energy. 2007. Energy Efficiency and Renewable Energy. “Freedom CAR and vehicle technology program; Plug-In hybrid- electric vehicle R&D Plan...ENGINEERING TECHNOLOGY READINESS ASSESSMENT OF HYBRID- ELECTRIC TECHNOLOGIES FOR TACTICAL WHEELED VEHICLES by Eddie E. McCown September 2014 Thesis...HYBRID- ELECTRIC TECHNOLOGIES FOR TACTICAL WHEELED VEHICLES 5. FUNDING NUMBERS 6. AUTHOR(S) Eddie E. McCown 7. PERFORMING ORGANIZATION NAME(S) AND

  5. The conceptual and practical challenges to technology categorisation in the preparation of technology needs assessments

    DEFF Research Database (Denmark)

    Nygaard, Ivan; Hansen, Ulrich Elmer

    2015-01-01

    The strong focus in climate negotiations on the transfer and diffusion of technologies as ameans to mitigate and adapt to climate change has entailed various programs to promote the transfer and diffusion of climate technologies, including the Technology Needs Assessment project (TNA). Despite...... a framework for categorizing technologies according to the types of markets and non-markets in which they are diffused. While the framework has contributed to a higher degree of ‘market literacy’ among national stakeholders, four challenges in categorizing technologies have been identified: i) technologies...

  6. Fluid Vessel Quantity Using Non-invasive PZT Technology Flight Volume Measurements Under Zero G Analysis

    Science.gov (United States)

    Garofalo, Anthony A

    2013-01-01

    The purpose of the project is to perform analysis of data using the Systems Engineering Educational Discovery (SEED) program data from 2011 and 2012 Fluid Vessel Quantity using Non-Invasive PZT Technology flight volume measurements under Zero G conditions (parabolic Plane flight data). Also experimental planning and lab work for future sub-orbital experiments to use the NASA PZT technology for fluid volume measurement. Along with conducting data analysis of flight data, I also did a variety of other tasks. I provided the lab with detailed technical drawings, experimented with 3d printers, made changes to the liquid nitrogen skid schematics, and learned how to weld. I also programmed microcontrollers to interact with various sensors and helped with other things going on around the lab.

  7. Fluid Vessel Quantity using Non-Invasive PZT Technology Flight Volume Measurements Under Zero G Analysis

    Science.gov (United States)

    Garofalo, Anthony A.

    2013-01-01

    The purpose of the project is to perform analysis of data using the Systems Engineering Educational Discovery (SEED) program data from 2011 and 2012 Fluid Vessel Quantity using Non-Invasive PZT Technology flight volume measurements under Zero G conditions (parabolic Plane flight data). Also experimental planning and lab work for future sub-orbital experiments to use the NASA PZT technology for fluid volume measurement. Along with conducting data analysis of flight data, I also did a variety of other tasks. I provided the lab with detailed technical drawings, experimented with 3d printers, made changes to the liquid nitrogen skid schematics, and learned how to weld. I also programmed microcontrollers to interact with various sensors and helped with other things going on around the lab.

  8. Remote-handled transuranic system assessment appendices. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-11-01

    Volume 2 of this report contains six appendices to the report: Inventory and generation of remote-handled transuranic waste; Remote-handled transuranic waste site storage; Characterization of remote-handled transuranic waste; RH-TRU waste treatment alternatives system analysis; Packaging and transportation study; and Remote-handled transuranic waste disposal alternatives.

  9. Remote-handled transuranic system assessment appendices. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-11-01

    Volume 2 of this report contains six appendices to the report: Inventory and generation of remote-handled transuranic waste; Remote-handled transuranic waste site storage; Characterization of remote-handled transuranic waste; RH-TRU waste treatment alternatives system analysis; Packaging and transportation study; and Remote-handled transuranic waste disposal alternatives.

  10. History of the international societies in health technology assessment: International Society for Technology Assessment in Health Care and Health Technology Assessment International.

    Science.gov (United States)

    Banta, David; Jonsson, Egon; Childs, Paul

    2009-07-01

    The International Society for Technology Assessment in Health Care (ISTAHC) was formed in 1985. It grew out of the increasing awareness of the international dimensions of health technology assessment (HTA) and the need for new communication methods at the international level. The main function of ISTAHC was to present an annual conference, which gradually grew in size, and also to generally improve in quality from to year. ISTAHC overextended itself financially early in the first decade of the 2000s and had to cease its existence. A new society, Health Technology Assessment international (HTAi), based on many of the same ideas and people, grew up beginning in the year 2003. The two societies have played a large role in making the field of HTA visible to people around the world and providing a forum for discussion on the methods and role of HTA.

  11. Technologies Assessing Limb Bradykinesia in Parkinson’s Disease

    Science.gov (United States)

    Hasan, Hasan; Athauda, Dilan S.; Foltynie, Thomas; Noyce, Alastair J.

    2017-01-01

    Background: The MDS-UPDRS (Movement Disorders Society – Unified Parkinson’s Disease Rating Scale) is the most widely used scale for rating impairment in PD. Subscores measuring bradykinesia have low reliability that can be subject to rater variability. Novel technological tools can be used to overcome such issues. Objective: To systematically explore and describe the available technologies for measuring limb bradykinesia in PD that were published between 2006 and 2016. Methods: A systematic literature search using PubMed (MEDLINE), IEEE Xplore, Web of Science, Scopus and Engineering Village (Compendex and Inspec) databases was performed to identify relevant technologies published until 18 October 2016. Results: 47 technologies assessing bradykinesia in PD were identified, 17 of which offered home and clinic-based assessment whilst 30 provided clinic-based assessment only. Of the eligible studies, 7 were validated in a PD patient population only, whilst 40 were tested in both PD and healthy control groups. 19 of the 47 technologies assessed bradykinesia only, whereas 28 assessed other parkinsonian features as well. 33 technologies have been described in additional PD-related studies, whereas 14 are not known to have been tested beyond the pilot phase. Conclusion: Technology based tools offer advantages including objective motor assessment and home monitoring of symptoms, and can be used to assess response to intervention in clinical trials or routine care. This review provides an up-to-date repository and synthesis of the current literature regarding technology used for assessing limb bradykinesia in PD. The review also discusses the current trends with regards to technology and discusses future directions in development. PMID:28222539

  12. IMPROVING HOSPITAL LOGISTICS BY RETHINKING TECHNOLOGY ASSESSMENT

    DEFF Research Database (Denmark)

    Jacobsen, Peter; Jørgensen, Pelle Morten Thomas

    2011-01-01

    In order to cope with the future challenges of the health care sector, there is an urging need for improving efficiency at hospitals. The study presents a framework enabling health care managers of improving the in-house logistics. The distinctiveness of the framework is the way in which it relates...... technology, logistics, structure and procedures to efficiency. Changing one factor e.g. technology, initiates an iterative loop focusing on change in the related factors in order to obtain the optimal efficiency. The search for an optimal efficient solution is the driving force of the framework...... at a Danish hospital. The framework is tested on the blood sample logistics between the emergency department and laboratory with the goal of enhancing the efficiency of the emergency department....

  13. Industrial Sector Technology Use Model (ISTUM): industrial energy use in the United States, 1974-2000. Volume 1. Primary model documentation. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Bohn, Roger E.; Herod, J. Steven; Andrews, Gwen L.; Budzik, Philip M.; Eissenstat, Richard S.; Grossmann, John R.; Reiner, Gary M.; Roschke, Thomas E.; Shulman, Michael J.; Toppen, Timothy R.; Veno, William R.; Violette, Daniel M.; Smolinski, Michael D.; Habel, Deborah; Cook, Alvin E.

    1979-10-01

    ISTUM is designed to predict the commercial market penetration of various energy technologies in the industrial sector out to the year 2000. It is a refinement and further development of Market Oriented Program Planning Study task force in 1977. ISTUM assesses the comparative economic competitiveness of each technology and competes over 100 energy technologies - conventionals, fossil/energy, conservation, cogeneration, solar, and geothermal. A broad overview of the model, the solution of the model, and an in-depth discussion of strength and limitations of the model are provided in Volume I. (MCW)

  14. Defining the "proven technology" technical criterion in the reactor technology assessment for Malaysia's nuclear power program

    Science.gov (United States)

    Anuar, Nuraslinda; Kahar, Wan Shakirah Wan Abdul; Manan, Jamal Abdul Nasir Abd

    2015-04-01

    Developing countries that are considering the deployment of nuclear power plants (NPPs) in the near future need to perform reactor technology assessment (RTA) in order to select the most suitable reactor design. The International Atomic Energy Agency (IAEA) reported in the Common User Considerations (CUC) document that "proven technology" is one of the most important technical criteria for newcomer countries in performing the RTA. The qualitative description of five desired features for "proven technology" is relatively broad and only provides a general guideline to its characterization. This paper proposes a methodology to define the "proven technology" term according to a specific country's requirements using a three-stage evaluation process. The first evaluation stage screens the available technologies in the market against a predefined minimum Technology Readiness Level (TRL) derived as a condition based on national needs and policy objectives. The result is a list of technology options, which are then assessed in the second evaluation stage against quantitative definitions of CUC desired features for proven technology. The potential technology candidates produced from this evaluation is further narrowed down to obtain a list of proven technology candidates by assessing them against selected risk criteria and the established maximum allowable total score using a scoring matrix. The outcome of this methodology is the proven technology candidates selected using an accurate definition of "proven technology" that fulfills the policy objectives, national needs and risk, and country-specific CUC desired features of the country that performs this assessment. A simplified assessment for Malaysia is carried out to demonstrate and suggest the use of the proposed methodology. In this exercise, ABWR, AP1000, APR1400 and EPR designs assumed the top-ranks of proven technology candidates according to Malaysia's definition of "proven technology".

  15. Illustrating anticipatory life cycle assessment for emerging photovoltaic technologies.

    Science.gov (United States)

    Wender, Ben A; Foley, Rider W; Prado-Lopez, Valentina; Ravikumar, Dwarakanath; Eisenberg, Daniel A; Hottle, Troy A; Sadowski, Jathan; Flanagan, William P; Fisher, Angela; Laurin, Lise; Bates, Matthew E; Linkov, Igor; Seager, Thomas P; Fraser, Matthew P; Guston, David H

    2014-09-16

    Current research policy and strategy documents recommend applying life cycle assessment (LCA) early in research and development (R&D) to guide emerging technologies toward decreased environmental burden. However, existing LCA practices are ill-suited to support these recommendations. Barriers related to data availability, rapid technology change, and isolation of environmental from technical research inhibit application of LCA to developing technologies. Overcoming these challenges requires methodological advances that help identify environmental opportunities prior to large R&D investments. Such an anticipatory approach to LCA requires synthesis of social, environmental, and technical knowledge beyond the capabilities of current practices. This paper introduces a novel framework for anticipatory LCA that incorporates technology forecasting, risk research, social engagement, and comparative impact assessment, then applies this framework to photovoltaic (PV) technologies. These examples illustrate the potential for anticipatory LCA to prioritize research questions and help guide environmentally responsible innovation of emerging technologies.

  16. Pineal Gland Volume Assessed by MRI and Its Correlation with 6-Sulfatoxymelatonin Levels among Older Men.

    Science.gov (United States)

    Sigurdardottir, Lara G; Markt, Sarah C; Sigurdsson, Sigurdur; Aspelund, Thor; Fall, Katja; Schernhammer, Eva; Rider, Jennifer R; Launer, Lenore; Harris, Tamara; Stampfer, Meir J; Gudnason, Vilmundur; Czeisler, Charles A; Lockley, Steven W; Valdimarsdottir, Unnur A; Mucci, Lorelei A

    2016-10-01

    The pineal gland produces the hormone melatonin, and its volume may influence melatonin levels. We describe an innovative method for estimating pineal volume in humans and present the association of pineal parenchyma volume with levels of the primary melatonin metabolite, 6-sulfatoxymelatonin. We selected a random sample of 122 older Icelandic men nested within the AGES-Reykjavik cohort and measured their total pineal volume, their parenchyma volume, and the extent of calcification and cysts. For volume estimations we used manual segmentation of magnetic resonance images in the axial plane with simultaneous side-by-side view of the sagittal and coronal plane. We used multivariable adjusted linear regression models to estimate the association of pineal parenchyma volume and baseline characteristics, including 6-sulfatoxymelatonin levels. We used logistic regression to test for differences in first morning urinary 6-sulfatoxymelatonin levels among men with or without cystic or calcified glands. The pineal glands varied in volume, shape, and composition. Cysts were present in 59% of the glands and calcifications in 21%. The mean total pineal volume measured 207 mm(3) (range 65-536 mm(3)) and parenchyma volume 178 mm(3) (range 65-503 mm(3)). In multivariable-adjusted models, pineal parenchyma volume was positively correlated with 6-sulfatoxymelatonin levels (β = 0.52, p pineal assessment, we found pineal parenchyma volume to be positively correlated with 6-sulfatoxymelatonin levels, in line with other recent studies.

  17. Annual Science and Engineering Technology Conference/DOD Technology Exposition (7th). Volume 2. Wednesday - Thursday

    Science.gov (United States)

    2006-04-20

    to engine teams thru AF code AF added strong staff/tech support (AQR) Interview, Dr.P. Bevilaqua, NAE Skunk-PM, Invented Lift Fan FIRST: STO-SSDash-VL...wafer-scale Pilot Line for rapid technology development Producing 4” QVGA backplanes and TDs Tools, materials and processes developed to enable...Centers of Excellence • Co-Funded by AFOSR, TD and University • Extends the capabilities and scope of AFRL • Opens up opportunity for continued focus on AF

  18. Quadrennial Technology Review 2015: Technology Assessments--Wind Power

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2015-10-07

    Wind power has become a mainstream power source in the U.S. electricity portfolio, supplying 4.9% of the nation’s electricity demand in 2014. With more than 65 GW installed across 39 states at the end of 2014, utility-scale wind power is a cost-effective source of low-emissions power generation throughout much of the nation. The United States has significant sustainable land-based and offshore wind resource potential, greater than 10 times current total U.S. electricity consumption. A technical wind resource assessment conducted by the Department of Energy (DOE) in 2009 estimated that the land-based wind energy potential for the contiguous United States is equivalent to 10,500 GW capacity at 80 meters (m) hub and 12,000 GW capacity at 100 meters (m) hub heights, assuming a capacity factor of at least 30%. A subsequent 2010 DOE report estimated the technical offshore wind energy potential to be 4,150 GW. The estimate was calculated from the total offshore area within 50 nautical miles of shore in areas where average annual wind speeds are at least 7 m per second at a hub height of 90 m.

  19. Engineered materials characterization report, volume 3 - corrosion data and modeling update for viability assessments

    Energy Technology Data Exchange (ETDEWEB)

    McCright, R D

    1998-06-30

    This Engineered Materials Characterization Report (EMCR), Volume 3, discusses in considerable detail the work of the past 18 months on testing the candidate materials proposed for the waste-package (WP) container and on modeling the performance of those materials in the Yucca Mountain (YM) repository setting This report was prepared as an update of information and serves as one of the supporting documents to the Viability Assessment (VA) of the Yucca Mountain Project. Previous versions of the EMCR have provided a history and background of container-materials selection and evaluation (Volume I), a compilation of physical and mechanical properties for the WP design effort (Volume 2), and corrosion-test data and performance-modeling activities (Volume 3). Because the information in Volumes 1 and 2 is still largely current, those volumes are not being revised. As new information becomes available in the testing and modeling efforts, Volume 3 is periodically updated to include that information.

  20. Generating technology assessment. Phase I work plan, Task 1 report

    Energy Technology Data Exchange (ETDEWEB)

    1979-10-15

    A plan of work outlining information to assess electric generating technologies is presented. Projections are made of realistic and understandable engineering and cost assessments of nonnuclear electrical generating technologies. A computer-based method of producing such engineering and cost estimates for use by EIA's Coal and Electric Power Analysis Division is to be developed and implemented. Technologies and processes to be assessed are: all nonnuclear conventional and nonconventional (coal gasification, advanced combustion turbines, atmospheric fluidized bed combustion, fuel cells, geothermal, solar thermal and photovoltaics, biomass conversion to electricity, ocean thermal, wind, and MHD). Engineering specifications recommended for determination are listed. Compatibility of the technologies are to be assessed with EIA models: MEFS, LEAP, and NCM.

  1. Instruments for Assessing the Impact of Technology in Education

    Science.gov (United States)

    Christensen, Rhonda; Knezek, Gerald

    2002-01-01

    Ten years of instrument development are summarized and placed within a framework for assessing the impact of technology in education. Seven well-validated instruments spanning the areas of attitudes, beliefs, skills, competencies, and technology integration proficiencies are presented, along with data analysis examples. These instruments are…

  2. Lifecycle Assessment of Biofuel Production from Wood Pyrolysis Technology

    Science.gov (United States)

    Manyele, S. V.

    2007-01-01

    Due to a stronger dependency on biomass for energy, there is a need for improved technologies in biomass-to-energy conversion in Tanzania. This paper presents a life cycle assessment (LCA) of pyrolysis technology used for conversion of wood and wood waste to liquid biofuel. In particular, a survey of environmental impacts of the process is…

  3. Scenario drafting to anticipate future developments in technology assessment

    NARCIS (Netherlands)

    Retel, V.P.; Joore, M.A.; Rutgers, E.J.; Harten, van W.H.

    2012-01-01

    Background Health Technology Assessment (HTA) information, and in particular cost-effectiveness data is needed to guide decisions, preferably already in early stages of technological development. However, at that moment there is usually a high degree of uncertainty, because evidence is limited and d

  4. Technology needs assessment (TNA) resource document for South Africa

    CSIR Research Space (South Africa)

    Taviv, R

    2007-08-01

    Full Text Available TNA(Technology needs assessment) is a requirement of Article 4.5 of the UNFCCC ‘Technology Transfer’ is a broad set of processes covering the flows of know-how, experience and equipment for mitigating or adapting to climate change amongst different...

  5. Lifecycle Assessment of Biofuel Production from Wood Pyrolysis Technology

    Science.gov (United States)

    Manyele, S. V.

    2007-01-01

    Due to a stronger dependency on biomass for energy, there is a need for improved technologies in biomass-to-energy conversion in Tanzania. This paper presents a life cycle assessment (LCA) of pyrolysis technology used for conversion of wood and wood waste to liquid biofuel. In particular, a survey of environmental impacts of the process is…

  6. Teacher Learning of Technology-Enhanced Formative Assessment

    Science.gov (United States)

    Beatty, Ian D.; Feldman, Allan; Leonard, William J.; Gerace, William J.; St. Cyr, Karen; Lee, Hyunju; Harris, Robby

    2008-01-01

    "Technology-Enhanced Formative Assessment" (TEFA) is an innovative pedagogy for teaching secondary school science or mathematics with "classroom response system" technology. "Teacher Learning of TEFA" (TLT) is a five year research project studying teacher change in the context of an intensive, sustained, on-site professional development (PD)…

  7. New Technologies for Standoff Assessment of Radiological Contamination

    Energy Technology Data Exchange (ETDEWEB)

    Cherepy, N; Stevens, C; Wurtz, R; Sanner, R; Frank, M; Tillotson, T; Hrubesh, L; Dietrich, D; Dignon, J; Soufli, R

    2005-05-06

    Technologies to rapidly quantify surface activity with minimal worker contact would dramatically decrease the radiation dose a radiation worker receives in assessment and cleanup operations, while obtaining a clear image of exactly where dispersed contamination is located. LLNL efforts in the development of the Photochromic Radiation Dosimeter and the Imaging Assessment System will be described. Initial use of these technologies in decontamination and decommissioning of contaminated facilities demonstrates several significant advantages over standard techniques such as survey meters and swipes.

  8. Technologies for Assessing Behavioral and Cognitive Markers of Suicide Risk

    Science.gov (United States)

    2016-10-01

    AWARD NUMBER: W81XWH-15-1-0632 TITLE: Technologies for Assessing Behavioral and Cognitive Markers of Suicide Risk PRINCIPAL INVESTIGATOR: Brian...CONTRACT NUMBER Technologies for Assessing Behavioral and Cognitive Markers of Suicide Risk 5b. GRANT NUMBER W81XWH-15-1-0632 5c. PROGRAM ELEMENT...suicide risk and to evaluate the predictive utility of these markers over a one year period. We propose to achieve these aims by: (a) collecting

  9. Potential Technologies for Assessing Risk Associated with a Mesoscale Forecast

    Science.gov (United States)

    2015-10-01

    the actual model-forecast error—the 500-hPa root-mean-square error (RMSE) height error. Future work should also consider other forecast metrics such...ARL-TN-0708 ● OCT 2015 US Army Research Laboratory Potential Technologies for Assessing Risk Associated with a Mesoscale...OCT 2015 US Army Research Laboratory Potential Technologies for Assessing Risk Associated with a Mesoscale Forecast by Patrick A

  10. Technology assessment of geothermal energy resource development

    Energy Technology Data Exchange (ETDEWEB)

    1975-04-15

    Geothermal state-of-the-art is described including geothermal resources, technology, and institutional, legal, and environmental considerations. The way geothermal energy may evolve in the United States is described; a series of plausible scenarios and the factors and policies which control the rate of growth of the resource are presented. The potential primary and higher order impacts of geothermal energy are explored, including effects on the economy and society, cities and dwellings, environmental, and on institutions affected by it. Numerical and methodological detail is included in appendices. (MHR)

  11. Gender and risk assessment in contraceptive technologies

    NARCIS (Netherlands)

    Kammen, van Jessika; Oudshoorn, Nelly

    2002-01-01

    This paper concerns a comparison of risk assessment practices of contraceptives for women and men. Our analysis shows how the evaluation of health risks of contraceptives does not simply reflect the specific effects of chemical compounds in the human body. Rather, we show how side-effects were rated

  12. Idaho National Engineering Laboratory Waste Area Groups 1-7 and 10 Technology Logic Diagram. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    O`Brien, M.C.; Meservey, R.H.; Little, M.; Ferguson, J.S.; Gilmore, M.C.

    1993-09-01

    The Idaho National Engineering Laboratory (INEL) Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates Environmental Restoration (ER) and Waste Management (WM) problems at the INEL to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to an environmental restoration need. It is essential that follow-on engineering and system studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologies identified in this TLD and finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk to meet the site windows of opportunity. The TLD consists of three separate volumes: Volume I includes the purpose and scope of the TLD, a brief history of the INEL Waste Area Groups, and environmental problems they represent. A description of the TLD, definitions of terms, a description of the technology evaluation process, and a summary of each subelement, is presented. Volume II (this volume) describes the overall layout and development of the TLD in logic diagram format. This section addresses the environmental restoration of contaminated INEL sites. Specific INEL problem areas/contaminants are identified along with technology solutions, the status of the technologies, precise science and technology needs, and implementation requirements. Volume III provides the Technology Evaluation Data Sheets (TEDS) for Environmental Restoration and Waste Management (EM) activities that are referenced by a TEDS codenumber in Volume II. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than provided for technologies in Volume II.

  13. Robins Air Force Base integrated resource assessment. Volume 3, Resource assessment

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, G.P.; Keller, J.M.; Stucky, D.J.; Wahlstrom, R.R.; Larson, L.L.

    1993-10-01

    The US Air Force Materiel Command (AFMC) has tasked the US Department of Energy (DOE) Federal Energy Management Program (FEMP), supported by the Pacific Northwest Laboratory (PNL), to identify, evaluate, and assist in acquiring all cost-effective energy projects at Robins Air Force Base (AFB). This is part of a model program that PNL is designing to support energy-use decisions in the federal sector. This report provides the results of the fossil fuel and electric energy resource opportunity (ERO) assessments performed by PNL at the AFMC Robins AFB facility located approximately 15 miles south of Macon, Georgia. It is a companion report to Volume 1, Executive Summary, and Volume 2, Baseline Detail. The results of the analyses of EROs are presented in 13 common energy end-use categories (e.g., boilers and furnaces, service hot water, and building lighting). A narrative-description of each ERO is provided, including information on the installed cost, energy and dollar savings; impacts on operation and maintenance (O&M); and, when applicable, a discussion of energy supply and demand, energy security, and environmental issues. A description of the evaluation methodologies and technical and cost assumptions is also provided for each ERO. Summary tables present the cost-effectiveness of energy end-use equipment before and after the implementation of each ERO and present the results of the life-cycle cost (LCC) analysis indicating the net present value (NPV) and savings to investment ratio (SIR) of each ERO.

  14. Patrick Air Force Base integrated resource assessment. Volume 3, Resource assessment

    Energy Technology Data Exchange (ETDEWEB)

    Sandusky, W.F.; Parker, S.A.; King, D.A.; Wahlstrom, R.R.; Elliott, D.B.; Shankle, S.A.

    1993-12-01

    The US Air Force has tasked the Pacific Northwest Laboratory (PNL) in support of the US Department of Energy Federal Energy Management Program to identify, evaluate, and assist in acquiring all cost effective energy projects at Patrick Air Force Base (AFB). This is part of a model program that PNL is designing to support energy-use decisions in the federal sector. This report provides the results of the fossil fuel and electric energy resource opportunity (ERO) assessments performed by PNL at Patrick AFB which is located south of Cocoa Beach, Florida. It is a companion report to Volume 1, Executive Summary, and Volume.2, Baseline Detail. The results of the analyses of EROs are presented in 11 common energy end-use categories. A narrative description of each ERO is provided, including information on the installed cost, energy and dollar savings, impacts on operations and maintenance, and, when applicable, a discussion of energy supply and demand, energy security, and environmental issues. A description of the evaluation methodologies and technical and cost assumptions is also provided for each ERO. Summary tables present the cost-effectiveness of energy end-use equipment before and after the implementation of each ERO and present the results of the life-cycle cost analysis indicating the net present value and value index of each ERO.

  15. Nigeria : Country Procurement Assessment Report, Volume 2. Main Text and Annexes

    OpenAIRE

    World Bank

    2000-01-01

    This Country Procurement Assessment Report (CPAR) for Nigeria reviews the procurement system in terms of: legal framework, public sector procurement of goods/works/consultants, procurement performance in Bank-financed projects, private sector procurement, trade practices, financial framework, and electronic commerce. The report consists of two volumes. The first volume contains a summary o...

  16. Nigeria : Country Procurement Assessment Report, Volume 1. Summary of Findings and Recommendations

    OpenAIRE

    World Bank

    2000-01-01

    This Country Procurement Assessment Report (CPAR) for Nigeria reviews the procurement system in terms of: legal framework, public sector procurement of goods/works/consultants, procurement performance in Bank-financed projects, private sector procurement, trade practices, financial framework, and electronic commerce. The report consists of two volumes. The first volume contains a summary o...

  17. Technology assessment for Spaceship Two, space tourism, and private spaceflight

    Science.gov (United States)

    Hancock, Randy

    A seven-step technology assessment was conducted to address questions regarding the significance and likely consequences associated with the introduction of Spaceship Two, space tourism, and private spaceflight. Impacts were assessed across four categories: the Role and Functions of Government, Private Industry Factors, Cultural and Societal Impacts, and the Time Frame in which these impacts were anticipated to occur. The technology assessment findings were compared to the results of expert interviews that addressed the sane four categories. The researcher noted that, while there was overwhelming agreement between the technology assessment's primary impacts and the expert interview responses, there were several differences. The technology assessment and interviewees agreed that the federal government would likely be both a regulator and user of private spaceflight. Both agreed that business partnerships would be key in pursuing private spaceflight. There was also consensus that, as market forces come to bear, ticket prices would drop and a larger market and broader passenger demographic would emerge. The technology assessment and experts agreed that an accident, especially one early in the industry's evolution, could be disastrous. Both agreed that private spaceflight can serve as a inspiration to students and be a positive influence in society, and both agreed that the start of passenger flights should take place in the 2010 - 2012 timeframe. Due to the potentially disastrous consequences of an accident, there was agreement between the technology assessment and experts on the value of flight and ground crew training, driven by insurance carriers and federal mandate. Most differences between the technology assessment's findings and the expert interview responses were due to omission, rather than direct disagreement. However, this was not the case in every instance. The most significant difference between the technology assessment and the experts involved the

  18. Enhancing economic competiveness of dish Stirling technology through production volume and localization: Case study for Morocco

    Science.gov (United States)

    Larchet, Kevin; Guédez, Rafael; Topel, Monika; Gustavsson, Lars; Machirant, Andrew; Hedlund, Maria-Lina; Laumert, Björn

    2017-06-01

    The present study quantifies the reduction in the levelized cost of electricity (LCoE) and capital expenditure (CAPEX) of a dish Stirling power plant (DSPP) through an increase in localization and unit production volume. Furthermore, the localization value of the plant is examined to determine how much investment is brought into the local economy. Ouarzazate, Morocco, was chosen as the location of the study due to the country's favorable regulatory framework with regards to solar power technologies and its established industry in the concentrating solar power (CSP) field. A detailed techno-economic model of a DSPP was developed using KTH's in-house modelling tool DYESOPT, which allows power plant evaluation by means of technical and economic performance indicators. Results on the basis of LCoE and CAPEX were compared between two different cases of production volume, examining both a minimum and maximum level of localization. Thereafter, the DSPP LCoE and localization value were compared against competing solar technologies to evaluate its competitiveness. In addition, a sensitivity analysis was conducted around key design parameters. The study confirms that the LCoE of a DSPP can be reduced to values similar to solar photovoltaic (PV) and lower than other CSP technologies. Furthermore, the investment in the local economy is far greater when compared to PV and of the same magnitude to other CSP technologies. The competiveness of a DSPP has the potential to increase further when coupled with thermal energy storage (TES), which is currently under development.

  19. Problems of method of technology assessment. A methodological analysis; Methodenprobleme des Technology Assessment; Eine methodologische Analyse

    Energy Technology Data Exchange (ETDEWEB)

    Zimmermann, V.

    1993-03-01

    The study undertakes to analyse the theoretical and methodological structure of Technology Assessment (TA). It is based on a survey of TA studies which provided an important condition for theoreticall sound statements on methodological aspects of TA. It was established that the main basic theoretical problems of TA are in the field of dealing with complexity. This is also apparent in the constitution of problems, the most elementary and central approach of TA. Scientifically founded constitution of problems and the corresponding construction of models call for interdisciplinary scientific work. Interdisciplinarity in the TA research process is achieved at the level of virtual networks, these networks being composed of individuals suited to teamwork. The emerging network structures have an objective-organizational and an ideational basis. The objective-organizational basis is mainly the result of team composition and the external affiliations of the team members. The ideational basis of the virtual network is represented by the team members` mode of thinking, which is individually located at a multidisciplinary level. The theoretical `skeleton` of the TA knowledge system, which is represented by process knowledge based linkage structures, can be generated and also processed in connection with the knowledge on types of problems, areas of analysis and procedures to deal with complexity. Within this process, disciplinary knowledge is a necessary but not a sufficient condition. Metatheoretical and metadisciplinary knowledge and the correspondingly processes complexity of models are the basis for the necessary methodological awareness, that allows TA to become designable as a research procedure. (orig./HP) [Deutsch] Die Studie stellt sich die Aufgabe, die theoretische und methodische Struktur des Technology Assessment (TA) zu analysieren. Sie fusst auf Erhebungen, die bei Technology-Assessment-Studien vorgenommen wurden und die wesentliche Voraussetzungen fuer

  20. Measuring and Assessing Application-Specific Technology Readiness

    Directory of Open Access Journals (Sweden)

    Antonino Ardilio

    2015-11-01

    Full Text Available Technology readiness is a crucial issue for decision-makers in technology-driven enterprises, determining whether the technology will or won’t be adopted for use in products or as a process technology. We know that, in some cases, lower technology readiness will be accepted by the users; these could be end-users, but, more often, it will be used in companies. The impact of a too early or too late adopted technology can be huge for companies and can even threaten market position or the existence of the company itself. Research institutes and technology developers, in particular application-oriented research organizations, might be also interested in which parameters or technology attributes should be improved or extended, according to the addressed application field, so that the technology fulfils the market-requested functions and a fast diffusion in the market can be achieved. Existing technology readiness models cover the various usages of the technology. In many cases, they assess the technology’s use in across different industries and application fields. However, the requirements in many fields are mostly different and very specific; thus, evaluation at such a high level can’t conclude whether the technology should be considered and adopted in the applications involved. This paper introduces an approach on how to determine and map the application-specific readiness of technology by decomposing both the application and the technology into its requested functions, as well as dynamically mapping the individual technology performance criteria. The applicability of this model will be demonstrated and discussed by a use case in the area of OLED-technology.

  1. Space-reactor electric systems: subsystem technology assessment

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, R.V.; Bost, D.; Determan, W.R.

    1983-03-29

    This report documents the subsystem technology assessment. For the purpose of this report, five subsystems were defined for a space reactor electric system, and the report is organized around these subsystems: reactor; shielding; primary heat transport; power conversion and processing; and heat rejection. The purpose of the assessment was to determine the current technology status and the technology potentials for different types of the five subsystems. The cost and schedule needed to develop these potentials were estimated, and sets of development-compatible subsystems were identified.

  2. Phase shifter technology assessment - Prospects and applications

    Science.gov (United States)

    Sokolov, Vladimir

    1991-01-01

    Capabilities and limitations of MMIC phase shifter technology at microwave and millimeter wave frequencies are reviewed. MMIC-based phase arrays make it possible to integrate active elements at the array face, i.e., to incorporate transmit power amplifiers and/or low noise amplifiers at each antenna element. Active elements make it possible to increase power efficiency and reliability and provide graceful degradation. Monolithic integration of the various transmit/receive functions including phase shifting is considered to be feasible through at least the lower millimeter-wave frequency range (about 30-100 GHz). MMIC integration also allows more flexibility in array design including those that are intended for airborne conformal applications.

  3. The conceptual and practical challenges to technology categorisation in the preparation of technology needs assessments

    DEFF Research Database (Denmark)

    Nygaard, Ivan; Hansen, Ulrich Elmer

    2015-01-01

    The strong focus in climate negotiations on the transfer and diffusion of technologies as ameans to mitigate and adapt to climate change has entailed various programs to promote the transfer and diffusion of climate technologies, including the Technology Needs Assessment project (TNA). Despite...... for the challenges in formulating plans of actions for technologies. If, due to a lack of conceptual clarity, it is not clear to countries whether the diffusion of a specific technology should be implemented by a project or by means of an enabling framework, the measures proposed in the action plans may...

  4. Variation in the measurement of cranial volume and surface area using 3D laser scanning technology.

    Science.gov (United States)

    Sholts, Sabrina B; Wärmländer, Sebastian K T S; Flores, Louise M; Miller, Kevin W P; Walker, Phillip L

    2010-07-01

    Three-dimensional (3D) laser scanner models of human crania can be used for forensic facial reconstruction, and for obtaining craniometric data useful for estimating age, sex, and population affinity of unidentified human remains. However, the use of computer-generated measurements in a casework setting requires the measurement precision to be known. Here, we assess the repeatability and precision of cranial volume and surface area measurements using 3D laser scanner models created by different operators using different protocols for collecting and processing data. We report intraobserver measurement errors of 0.2% and interobserver errors of 2% of the total area and volume values, suggesting that observer-related errors do not pose major obstacles for sharing, combining, or comparing such measurements. Nevertheless, as no standardized procedure exists for area or volume measurements from 3D models, it is imperative to report the scanning and postscanning protocols employed when such measurements are conducted in a forensic setting.

  5. Noninvasive imaging technologies for cutaneous wound assessment: A review.

    Science.gov (United States)

    Paul, Dereck W; Ghassemi, Pejhman; Ramella-Roman, Jessica C; Prindeze, Nicholas J; Moffatt, Lauren T; Alkhalil, Abdulnaser; Shupp, Jeffrey W

    2015-01-01

    The ability to phenotype wounds for the purposes of assessing severity, healing potential and treatment is an important function of evidence-based medicine. A variety of optical technologies are currently in development for noninvasive wound assessment. To varying extents, these optical technologies have the potential to supplement traditional clinical wound evaluation and research, by providing detailed information regarding skin components imperceptible to visual inspection. These assessments are achieved through quantitative optical analysis of tissue characteristics including blood flow, collagen remodeling, hemoglobin content, inflammation, temperature, vascular structure, and water content. Technologies that have, to this date, been applied to wound assessment include: near infrared imaging, thermal imaging, optical coherence tomography, orthogonal polarization spectral imaging, fluorescence imaging, laser Doppler imaging, microscopy, spatial frequency domain imaging, photoacoustic detection, and spectral/hyperspectral imaging. We present a review of the technologies in use or development for these purposes with three aims: (1) providing basic explanations of imaging technology concepts, (2) reviewing the wound imaging literature, and (3) providing insight into areas for further application and exploration. Noninvasive imaging is a promising advancement in wound assessment and all technologies require further validation.

  6. Elaboration and validation of an assistive technology assessment questionnaire

    Directory of Open Access Journals (Sweden)

    Fernanda Jorge Guimarães

    2015-06-01

    Full Text Available Assistive Technologies consists of resources, methods, and strategies favoring autonomy and inclusion of elderly and people with disabilities, being scarce in the literature instruments assessing them. A methodology study conducted with a panel of specialists and people with visual impairment, aimed to elaborate and validate a questionnaire to assess educational assistive technology. To consider an item as valid, we used 80% as agreement percentage, and validity and reliability of the questionnaire were calculated. Assistive Technology was characterized in six attributes: objectives, access, clarity, structure and presentation, relevance and efficacy, interactivity, and 19 items were elaborated to compose the questionnaire. From those, 11 obtained percentages higher than 80%, seven were modified and one was excluded. The instrument Cronbach’s alpha was 0,822, guaranteeing validity and reliability of the tool to assess health education Assistive Technology, and therefore, its use is indicated.

  7. Technology Enhanced Formative Assessment for 21st Century Learning

    Science.gov (United States)

    Spector, J. Michael; Ifenthaler, Dirk; Sampson, Demetrios; Yang, Lan; Mukama, Evode; Warusavitarana, Amali; Dona, Kulari Lokuge; Eichhorn, Koos; Fluck, Andrew; Huang, Ronghuai; Bridges, Susan; Lu, Jiingyan; Ren, Youqun; Gui, Xiaoqing; Deneen, Christopher C.; San Diego, Jonathan; Gibson, David C.

    2016-01-01

    This paper is based on the deliberations of the Assessment Working Group at EDUsummIT 2015 in Bangkok, Thailand. All of the members of Thematic Working Group 5 (TWG5) have contributed to this synthesis of potentials, concerns and issues with regard to the role of technology in assessment as, for and of learning in the 21st century. The group…

  8. Utilisation of medical technology assessment in health policy

    NARCIS (Netherlands)

    van den Heuvel, WJA; Wieringh, R; van den Heuvel, LPM

    1997-01-01

    Objective: To assess the contribution of medical technology assessment (MTA) to health policy decision making, the question has to be answered whether MTA is actually being used in decision-making processes and what factors are related to its utilisation. Design: We investigated recent Dutch policy

  9. Voice Assessment of Student Work: Recent Studies and Emerging Technologies

    Science.gov (United States)

    Eckhouse, Barry; Carroll, Rebecca

    2013-01-01

    Although relatively little attention has been given to the voice assessment of student work, at least when compared with more traditional forms of text-based review, the attention it has received strongly points to a promising form of review that has been hampered by the limits of an emerging technology. A fresh review of voice assessment in light…

  10. A reliable and consistent production technology for high volume compacted graphite iron castings

    Institute of Scientific and Technical Information of China (English)

    Liu Jincheng

    2014-01-01

    The demands for improved engine performance, fuel economy, durability, and lower emissions provide a continual chalenge for engine designers. The use of Compacted Graphite Iron (CGI) has been established for successful high volume series production in the passenger vehicle, commercial vehicle and industrial power sectors over the last decade. The increased demand for CGI engine components provides new opportunities for the cast iron foundry industry to establish efficient and robust CGI volume production processes, in China and globaly. The production window range for stable CGI is narrow and constantly moving. Therefore, any one step single addition of magnesium aloy and the inoculant cannot ensure a reliable and consistent production process for complicated CGI engine castings. The present paper introduces the SinterCast thermal analysis process control system that provides for the consistent production of CGI with low nodularity and reduced porosity, without risking the formation of lfake graphite. The technology is currently being used in high volume Chinese foundry production. The Chinese foundry industry can develop complicated high demand CGI engine castings with the proper process control technology.

  11. Reactor technology assessment and selection utilizing systems engineering approach

    Science.gov (United States)

    Zolkaffly, Muhammed Zulfakar; Han, Ki-In

    2014-02-01

    The first Nuclear power plant (NPP) deployment in a country is a complex process that needs to consider technical, economic and financial aspects along with other aspects like public acceptance. Increased interest in the deployment of new NPPs, both among newcomer countries and those with expanding programs, necessitates the selection of reactor technology among commercially available technologies. This paper reviews the Systems Decision Process (SDP) of Systems Engineering and applies it in selecting the most appropriate reactor technology for the deployment in Malaysia. The integrated qualitative and quantitative analyses employed in the SDP are explored to perform reactor technology assessment and to select the most feasible technology whose design has also to comply with the IAEA standard requirements and other relevant requirements that have been established in this study. A quick Malaysian case study result suggests that the country reside with PWR (pressurized water reactor) technologies with more detailed study to be performed in the future for the selection of the most appropriate reactor technology for Malaysia. The demonstrated technology assessment also proposes an alternative method to systematically and quantitatively select the most appropriate reactor technology.

  12. National Institute for Petroleum and Energy Research quarterly technical report, July 1--September 30, 1992. Volume 2, Energy production research

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-01

    Volume II includes: chemical flooding--supporting research; gas displacement--supporting research; thermal recovery--supporting research; geoscience technology; resource assessment technology; and microbial technology.

  13. Emerging frontier technologies for food safety analysis and risk assessment

    Institute of Scientific and Technical Information of China (English)

    DONG Yi-yang; LIU Jia-hui; WANG Sai; CHEN Qi-long; GUO Tian-yang; ZHANG Li-ya; JIN Yong; SU Hai-jia; TAN Tian-wei

    2015-01-01

    Access to security and safe food is a basic human necessity and essential for a sustainable world. To perform hi-end food safety analysis and risk assessment with state of the art technologies is of utmost importance thereof. With applications as exempliifed by microlfuidic immunoassay, aptasensor, direct analysis in real time, high resolution mass spectrometry, benchmark dose and chemical speciifc adjustment factor, this review presents frontier food safety analysis and risk assess-ment technologies, from which both food quality and public health wil beneift undoubtedly in a foreseeable future.

  14. The principles of Health Technology Assessment in laboratory medicine.

    Science.gov (United States)

    Liguori, Giorgio; Belfiore, Patrizia; D'Amora, Maurizio; Liguori, Renato; Plebani, Mario

    2017-01-01

    The Health Technology Assessment (HTA) is a multi-professional and multidisciplinary evaluation approach designed to assess health technology in the broadest sense of the term, from its instruments to the rearranging of its organizational structures. It is by now an established methodology at national and international levels that involves several medical disciplines thanks to its versatility. Laboratory medicine is one of these disciplines. Such specialization was subjected, in recent years, to deep changes even from an organizational standpoint, in order to meet the health needs of the population, making them as effective and cost-effective as possible. In this regard, HTA was the tool used to assess implications in different areas.

  15. Electric and Magnetic Fields (EMF) RAPID Program Engineering Project 8: FINAL REPORT, Evaluation of Field Reduction Technologies, Volume 1 (Report) and Volume 2 (Appendices)

    Energy Technology Data Exchange (ETDEWEB)

    Commonwealth Associates, Inc.; IIT Research Institute

    1997-08-01

    This draft report consists of two volumes. Volume 1, the main body, contains an introducto~ sectionj an overview of magnetic fields sectio~ and field reduction technology evaluation section. Magnetic field reduction methods are evalpated for transmission lines, distribution Iines,sulxtations, building wiring applkmd machinery, and transportation systems. The evaluation considers effectiveness, co% and other ftiors. Volume 2 contains five appendices, Append~ A presents magnetic field shielding information. Appendices B and C present design assumptions and magnetic field plots for transmission and distribution lines, respectively. Appendices D and E present cost estimate details for transmission and distribution limes, respectively.

  16. Fifth DOE symposium on enhanced oil and gas recovery and improved drilling technology. Volume 3. Gas and drilling

    Energy Technology Data Exchange (ETDEWEB)

    Linville, B. [ed.

    1979-01-01

    Volume 3 contains papers from the sessions on natural gas supporting research, western gas sands project, drilling technology, and environmental effects. Individuals were processed for inclusion in the Energy Data Base.

  17. Vandenberg Air Force Base integrated resource assessment. Volume 3, Resource assessment

    Energy Technology Data Exchange (ETDEWEB)

    Daellenbach, K.K.; Dagle, J.E.; Dittmer, A.L.; Elliott, D.B.; Halverson, M.A.; Hickman, B.J.; Parker, G.B.; Richman, E.E.; Shankle, S.A.

    1993-06-01

    The US Air Force Space Command (SPACECOM) has tasked the Pacific Northwest Laboratory (PNL), as the lead laboratory supporting the US Department of Energy (DOE) Federal Energy Management Program (FEMP), to identify, evaluate, and assist in acquiring all cost-effective energy projects at Vandenberg Air Force Base (VAFB). This is part of a model program that PNL is designing to support energy-use decisions in the federal sector. This report provides the results of the fossil fuel and electric energy resource opportunity (ERO) assessments performed by PNL at the SPACECOM VAFB facility located approximately 50 miles northwest of Santa Barbara, California. It is a companion report to Volume 1, Executive Summary, and Volume 2, Baseline Detail. The results of the analysis of EROs are presented in ten common energy end-use categories (e.g., boilers and furnaces, service hot water, and building lighting). In addition, a case study of process loads at Space Launch Complex-4 (SLC-4) is included. A narrative description of each ERO is provided, including information on the installed cost, energy and dollar savings; impacts on operation and maintenance (O and M); and, when applicable, a discussion of energy supply and demand, energy security, and environmental issues. A description of the evaluation methodologies and technical and cost assumptions is also provided for each ERO. Summary tables present the cost-effectiveness of energy end-use equipment before and after the implementation of each ERO and present the results of the life-cycle cost (LCC) analysis indicating the net present value (NPV) and value index (VI) of each ERO. Finally, an appendix includes a summary of an economic analysis case study of the South Vandenberg Power Plant (SVPP) operating scenarios.

  18. Cape Canaveral Air Force Station integrated resource assessment. Volume 3, Resource assessment

    Energy Technology Data Exchange (ETDEWEB)

    Sandusky, W.F.; Eichman, C.J.; King, D.A.; McMordie, K.L.; Parker, S.A.; Shankle, S.A.; Wahlstrom, R.R.

    1994-03-01

    The U.S. Air Force (USAF) has tasked the Pacific Northwest Laboratory (PNL) in support of the U.S. Department of Energy (DOE) Federal Energy Management Program (FEMP), to identify, evaluate, and assist in acquiring all cost-effective energy projects at Cape Canaveral Air Force Station (AFS). Projects considered can be either in the form of energy management or energy conservation. The overall efforts of this task are based on a model program PNL is designing to support energy-use decisions in the federal sector. This report provides the results of the fossil fuel and electric energy resource opportunity (ERO) assessments performed by PNL at Cape Canaveral AFS, which is located approximately 10 miles north of Cocoa Beach, Florida. It is a companion report to Volume 1: Executive Summary and Volume 2: Baseline Detail. The results of the analyses of EROs are presented in 11 common energy end-use categories (e.g., boilers and furnaces, service hot water, and building lighting). A narrative description of each ERO is provided, including information on the installed cost, energy and dollar savings, impacts on operations and maintenance (O&M), and, when applicable, a discussion of energy supply and demand, energy security, and environmental issues. Descriptions of the evaluation methodologies and technical and cost assumptions are also provided for each ERO. Summary tables present the cost- effectiveness of energy end-use equipment before and after the implementation of each ERO and present the results of the life-cycle cost (LCC) analysis, indicating the net present value (NPV) and savings-to-investment ratio (SIR) of each ERO.

  19. ASSESSMENT OF ORGANIZATIONAL AND TECHNOLOGICAL RELIABILITY OF INDUSTRIAL CONSTRUCTION ENTERPRISES

    Directory of Open Access Journals (Sweden)

    Gazaryan Robert Kamoevich

    2012-10-01

    Full Text Available In this article, the procedure of identification of organizational and technological reliability is described. This methodology is applicable both to separate functional areas and to all industrial enterprises. Its objective is to assess the expediency of reorganization. The objective of this scientific research is the substantiation of reorganization of an industrial enterprise. Multivariable models, or convolutions, were used as research methods. According to the RF law, industrial enterprises are divided into four functional areas, each of which is assessed on the basis of multiple criteria. Assessment of organizational and technological reliability requires a multi-parameter model. Its axes correspond to the number of evaluation criteria. The set of criteria designated for the assessment of organizational and technological reliability is identified on the basis of the homogeneity of trend indicators designated for centripetal and centrifugal models. The axes of a multi-parameter model represent real and benchmark values. The unit serves as the benchmark value; it is the maximal value of this parameter. The formula based on average values shall be used to determine the total value of the above parameters. The authors have also generated a model of organizational and technological reliability of industrial enterprises. It is noteworthy that assessment of organizational and technological reliability of an industrial enterprise requires a concentric multi-layer model developed through the application of the convolution method.

  20. Technological and life cycle assessment of organics processing odour control technologies

    Energy Technology Data Exchange (ETDEWEB)

    Bindra, Navin [School of Engineering, University of Guelph, 50 Stone Road East, Guelph, Ontario N1G2W1 (Canada); Dubey, Brajesh, E-mail: bkdubey@civil.iitkgp.ernet.in [School of Engineering, University of Guelph, 50 Stone Road East, Guelph, Ontario N1G2W1 (Canada); Environmental Engineering Division, Department of Civil Engineering, Indian Institute of Technology, Kharagpur, West Bengal 721302 (India); Dutta, Animesh [School of Engineering, University of Guelph, 50 Stone Road East, Guelph, Ontario N1G2W1 (Canada)

    2015-09-15

    As more municipalities and communities across developed world look towards implementing organic waste management programmes or upgrading existing ones, composting facilities are emerging as a popular choice. However, odour from these facilities continues to be one of the most important concerns in terms of cost & effective mitigation. This paper provides a technological and life cycle assessment of some of the different odour control technologies and treatment methods that can be implemented in organics processing facilities. The technological assessment compared biofilters, packed tower wet scrubbers, fine mist wet scrubbers, activated carbon adsorption, thermal oxidization, oxidization chemicals and masking agents. The technologies/treatment methods were evaluated and compared based on a variety of operational, usage and cost parameters. Based on the technological assessment it was found that, biofilters and packed bed wet scrubbers are the most applicable odour control technologies for use in organics processing faculties. A life cycle assessment was then done to compare the environmental impacts of the packed-bed wet scrubber system, organic (wood-chip media) bio-filter and inorganic (synthetic media) bio-filter systems. Twelve impact categories were assessed; cumulative energy demand (CED), climate change, human toxicity, photochemical oxidant formation, metal depletion, fossil depletion, terrestrial acidification, freshwater eutrophication, marine eutrophication, terrestrial eco-toxicity, freshwater eco-toxicity and marine eco-toxicity. The results showed that for all impact categories the synthetic media biofilter had the highest environmental impact, followed by the wood chip media bio-filter system. The packed-bed system had the lowest environmental impact for all categories. - Highlights: • Assessment of odour control technologies for organics processing facilities. • Comparative life cycle assessment of three odour control technologies was conducted

  1. Economic Feasibility and Market Readiness of Solar Technologies. Draft Final Report. Volume I.

    Energy Technology Data Exchange (ETDEWEB)

    Flaim, Silvio J.; Buchanan, Deborah L.; Christmas, Susan; Fellhauer, Cheryl; Glenn, Barbara; Ketels, Peter A.; Levary, Arnon; Mourning, Pete; Steggerda, Paul; Trivedi, Harit; Witholder, Robert E.

    1978-09-01

    Systems descriptions, costs, technical and market readiness assessments are reported for ten solar technologies: solar heating and cooling of buildings (SHACOB), passive, agricultural and industrial process heat (A/IPH), biomass, ocean thermal (OTEC), wind (WECS), solar thermal electric, photovoltaics, satellite power station (SPS), and solar total energy systems (STES). Study objectives, scope, and methods. are presented. of Joint Task The cost and market analyses portion 5213/6103 will be used to make commercialization assessments in the conclusions of. the final report.

  2. Idaho National Engineering Laboratory Waste Area Groups 1-7 and 10 Technology Logic Diagram. Volume 3

    Energy Technology Data Exchange (ETDEWEB)

    O`Brien, M.C.; Meservey, R.H.; Little, M.; Ferguson, J.S.; Gilmore, M.C.

    1993-09-01

    The Idaho National Engineering Laboratory (INEL) Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates Environmental Restoration (ER) and Waste Management (WM) problems at the INEL to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to an environmental restoration need. It is essential that follow-on engineering and system studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologies identified in this TLD and finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk to meet the site windows of opportunity. The TLD consists of three separate volumes: Volume I includes the purpose and scope of the TLD, a brief history of the INEL Waste Area Groups, and environmental problems they represent. A description of the TLD, definitions of terms, a description of the technology evaluation process, and a summary of each subelement, is presented. Volume II describes the overall layout and development of the TLD in logic diagram format. This section addresses the environmental restoration of contaminated INEL sites. Volume III (this volume) provides the Technology Evaluation Data Sheets (TEDS) for Environmental Restoration and Waste Management (EM) activities that are reference by a TEDS code number in Volume II. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than provided for technologies in Volume II. Data sheets are arranged alphanumerically by the TEDS code number in the upper right corner of each sheet.

  3. LDA Assessments. Learning Times. Volume 7, Number 1

    Science.gov (United States)

    LDA Minnesota, 2008

    2008-01-01

    This issue of "Learning Times" discusses how LDA assessments for children and adults provide self-understanding, renewed hope, and improved achievement. It also includes: (1) Where do Your Candidates Stand on Controlling Toxic Chemicals?; (2) ADHD (Attention Deficit Hyperactivity Disorder) Tips: Back-to-School (Ty Sassaman); (3) Healthy Legacy:…

  4. Technology Assessment Tool - An Application of Systems Engineering to USDOE Technology Proposals

    Energy Technology Data Exchange (ETDEWEB)

    Rynearson, Michael Ardel

    1999-06-01

    This paper discusses the system design for a Technology Assessment (TA) tool that can be used to quantitatively evaluate new and advanced technologies, products, or processes. Key features of the tool include organization of information in an indentured hierarchy; questions and categories derived from the decomposition of technology performance; segregation of life-cycle issues into six assessment categories; and scoring, relative impact, and sensitivity analysis capability. An advantage of the tool's use is its ability to provide decision analysis data, based on incomplete or complete data.

  5. Technology Assessment Tool - An Application of Systems Engineering to USDOE Technology Proposals

    Energy Technology Data Exchange (ETDEWEB)

    Rynearson, Michael Ardel

    1999-06-01

    This paper discusses the system design for a Technology Assessment (TA) tool that can be used to quantitatively evaluate new and advanced technologies, products, or processes. Key features of the tool include organization of information in an indentured hierarchy; questions and categories derived from the decomposition of technology performance; segregation of life-cycle issues into six assessment categories; and scoring, relative impact, and sensitivity analysis capability. An advantage of the tool's use is its ability to provide decision analysis data, based on incomplete or complete data.

  6. Technology Assessment Tool - An Application of Systems Engineering to USDOE Technology Proposals

    Energy Technology Data Exchange (ETDEWEB)

    M. A. Rynearson

    1999-06-01

    This paper discusses the system design of a Technology Assessment (TA) tool that can be used to quantitatively evaluate new and advanced technologies, products, or processes. Key features of the tool include organization of information in an indentured hierarchy; questions and categories derived from the decomposition of technology performance; segregation of life-cycle issues into six assessment categories; and scoring, relative impact, and sensitivity analysis capability. An advantage of the tool's use is its ability to provide decision analysis data, based on incomplete or complete data.

  7. Impact of geothermal technology improvements on royalty collections on federal lands: Volume II: Appendices

    Energy Technology Data Exchange (ETDEWEB)

    1988-10-01

    This volume contains the appendices for the ''Impact of Geothermal Technology Improvements on Royalty Collections on Federal Lands, Final Report, Volume I.'' The material in this volume supports the conclusions presented in Volume I and details each Known Geothermal Resource Area's (KGRA's) royalty estimation. Appendix A details the physical characteristics of each KGRA considered in Volume I. Appendix B supplies summary narratives on each state which has a KGRA. The information presented in Appendix C shows the geothermal power plant area proxies chosen for each KGRA considered within the report. It also provides data ranges which fit into the IMGEO model for electric energy cost estimates. Appendix D provides detailed cost information from the IMGEO model if no Geothermal Program RandD goals were completed beyond 1987 and if all the RandD goals were completed by the year 2000. This appendix gives an overall electric cost and major system costs, which add up to the overall electric cost. Appendix E supplies information for avoided cost projections for each state involved in the study that were used in the IMGEO model run to determine at what cost/kWh a 50 MWe plant could come on line. Appendix F supplies the code used in the determination of royalty income, as well as, tabled results of the royalty runs (detailed in Appendix G). The tabled results show royalty incomes, assuming a 10% discount rate, with and without RandD and with and without a $0.01/kWh transmission cost. Individual data sheets for each KGRA royalty income run are presented in Appendix G.

  8. Evaluation of spacecraft technology programs (effects on communication satellite business ventures), volume 1

    Science.gov (United States)

    Greenburg, J. S.; Gaelick, C.; Kaplan, M.; Fishman, J.; Hopkins, C.

    1985-01-01

    Commercial organizations as well as government agencies invest in spacecraft (S/C) technology programs that are aimed at increasing the performance of communications satellites. The value of these programs must be measured in terms of their impacts on the financial performane of the business ventures that may ultimately utilize the communications satellites. An economic evaluation and planning capability was developed and used to assess the impact of NASA on-orbit propulsion and space power programs on typical fixed satellite service (FSS) and direct broadcast service (DBS) communications satellite business ventures. Typical FSS and DBS spin and three-axis stabilized spacecraft were configured in the absence of NASA technology programs. These spacecraft were reconfigured taking into account the anticipated results of NASA specified on-orbit propulsion and space power programs. In general, the NASA technology programs resulted in spacecraft with increased capability. The developed methodology for assessing the value of spacecraft technology programs in terms of their impact on the financial performance of communication satellite business ventures is described. Results of the assessment of NASA specified on-orbit propulsion and space power technology programs are presented for typical FSS and DBS business ventures.

  9. Low-level radioactive waste from commercial nuclear reactors. Volume 1. Recommendations for technology developments with potential to significantly improve low-level radioactive waste management

    Energy Technology Data Exchange (ETDEWEB)

    Rodgers, B.R.; Jolley, R.L.

    1986-02-01

    The overall task of this program was to provide an assessment of currently available technology for treating commercial low-level radioactive waste (LLRW), to initiate development of a methodology for choosing one technology for a given application, and to identify research needed to improve current treatment techniques and decision methodology. The resulting report is issued in four volumes. Volume 1 provides an executive summary and a general introduction to the four-volume set, in addition to recommendations for research and development (R and D) for low-level radioactive waste (LLRW) treatment. Generic, long-range, and/or high-risk programs identified and prioritized as needed R and D in the LLRW field include: (1) systems analysis to develop decision methodology; (2) alternative processes for dismantling, decontaminating, and decommissioning; (3) ion exchange; (4) incinerator technology; (5) disposal technology; (6) demonstration of advanced technologies; (7) technical assistance; (8) below regulatory concern materials; (9) mechanical treatment techniques; (10) monitoring and analysis procedures; (11) radical process improvements; (12) physical, chemical, thermal, and biological processes; (13) fundamental chemistry; (14) interim storage; (15) modeling; and (16) information transfer. The several areas are discussed in detail.

  10. Transuranic and Low-Level Boxed Waste Form Nondestructive Assay Technology Overview and Assessment

    Energy Technology Data Exchange (ETDEWEB)

    G. Becker; M. Connolly; M. McIlwain

    1999-02-01

    The Mixed Waste Focus Area (MWFA) identified the need to perform an assessment of the functionality and performance of existing nondestructive assay (NDA) techniques relative to the low-level and transuranic waste inventory packaged in large-volume box-type containers. The primary objectives of this assessment were to: (1) determine the capability of existing boxed waste form NDA technology to comply with applicable waste radiological characterization requirements, (2) determine deficiencies associated with existing boxed waste assay technology implementation strategies, and (3) recommend a path forward for future technology development activities, if required. Based on this assessment, it is recommended that a boxed waste NDA development and demonstration project that expands the existing boxed waste NDA capability to accommodate the indicated deficiency set be implemented. To ensure that technology will be commercially available in a timely fashion, it is recommended this development and demonstration project be directed to the private sector. It is further recommended that the box NDA technology be of an innovative design incorporating sufficient NDA modalities, e.g., passive neutron, gamma, etc., to address the majority of the boxed waste inventory. The overall design should be modular such that subsets of the overall NDA system can be combined in optimal configurations tailored to differing waste types.

  11. HEALTH TECHNOLOGY ASSESSMENT ON CERVICAL CANCER SCREENING, 2000–2014

    OpenAIRE

    Lahue, Betsy J.; Baginska, Eva; Li, Sophia S.; Parisi, Monika

    2015-01-01

    Objectives: The aim of this study was to conduct a review of health technology assessments (HTAs) in cervical cancer screening to highlight the most common metrics HTA agencies use to evaluate and recommend cervical cancer screening technologies. Methods: The Center for Reviews and Dissemination (CRD), MedLine, and national HTA agency databases were searched using keywords (“cervical cancer screening” OR “cervical cancer” OR “cervical screening”) and “HTA” from January 2000 to October 2014. N...

  12. Nutrition and health technology assessment: when two worlds meet

    OpenAIRE

    Poley, Marten J.

    2015-01-01

    There is a growing recognition that nutrition may have a positive impact on public health and that it may reduce medical expenditures. Yet, such claims need to be substantiated by evidence. This evidence could be delivered by health technology assessment (HTA), which can be thought of as the evaluation of technologies for clinical effectiveness, cost-effectiveness, and ethical, legal, and social impacts. The application of HTA to the field of “nutrition interventions” is recent. So far, HTA a...

  13. Nuclear proliferation and civilian nuclear power: report of the Nonproliferation Alternative Systems Assessment Program. Volume 1. Program summary

    Energy Technology Data Exchange (ETDEWEB)

    1979-12-01

    This report summarizes the Nonproliferation Alternative Systems Assessment Program (NASAP): its background, its studies, and its results. This introductory chapter traces the growth of the issue of nuclear weapons proliferation and the organization and objectives of NASAP. Chapter 2 summarizes the program's assessments, findings and recommendations. Each of Volumes II-VII reports on an individual assessment (Volume II: Proliferation Resistance; Volume III: Resources and Fuel Cycle Facilities; Volume IV: Commercial Potential; Volume V: Economics and Systems Analysis; Volume VI: Safety and Environmental Considerations for Licensing; Volume VII: International Perspectives). Volume VIII (Advanced Concepts) presents a combined assessment of several less fully developed concepts, and Volume IX (Reactor and Fuel Cycle Descriptions) provides detailed descriptions of the reactor and fuel-cycle systems studied by NASAP.

  14. Technological Implications for Assessment Ecosystems: Opportunities for Digital Technology to Advance Assessment

    Science.gov (United States)

    Behrens, John T.; DiCerbo, Kristen E.

    2014-01-01

    Background: It would be easy to think the technological shifts in the digital revolution are simple incremental progressions in societal advancement. However, the nature of digital technology is resulting in qualitative differences in nearly all parts of daily life. Purpose: This paper investigates how the new possibilities for understanding,…

  15. Guidelines for the assessment and optimization of turboexpansion technologies

    Energy Technology Data Exchange (ETDEWEB)

    Albrecht, Philipp; Mastandrea, Martin [TECNA Estudios y Proyectos de Ingenieria S.A. (Argentina)

    2004-07-01

    The operating performance of a turbo expansion process depends on several factors among which we find: pressure, temperature and feed stream composition, expected recovery, pressure required for residual gas and products' specifications. The evolution of markets has set the development of several technologies; it is therefore complex, and rather impossible, to establish which of those technologies represents the most suitable choice for certain conditions by simply inspecting the above-mentioned factors. Guidelines for the assessment and optimization of available technologies are presented in this work. Also, relevant matters to be taken into account in the development of different units of a turbo expansion plant are mentioned. (author)

  16. Assessment of a satellite power system and six alternative technologies

    Energy Technology Data Exchange (ETDEWEB)

    Wolsko, T.; Whitfield, R.; Samsa, M.; Habegger, L.S.; Levine, E.; Tanzman, E.

    1981-04-01

    The satellite power system is assessed in comparison to six alternative technologies. The alternatives are: central-station terrestrial photovoltaic systems, conventional coal-fired power plants, coal-gasification/combined-cycle power plants, light water reactor power plants, liquid-metal fast-breeder reactors, and fusion. The comparison is made regarding issues of cost and performance, health and safety, environmental effects, resources, socio-economic factors, and insitutional issues. The criteria for selecting the issues and the alternative technologies are given, and the methodology of the comparison is discussed. Brief descriptions of each of the technologies considered are included. (LEW)

  17. Assessment of the adequacy of bronchial stenting by flow-volume loops

    Energy Technology Data Exchange (ETDEWEB)

    McLaren, Clare A.; Roebuck, Derek J. [Great Ormond Street Hospital for Children, Department of Radiology, London (United Kingdom); Pigott, Nick; Elliott, Martin J. [Great Ormond Street Hospital for Children, Cardiothoracic Unit, London (United Kingdom); Dunne, Catherine [Great Ormond Street Hospital for Children, Department of Physiotherapy, London (United Kingdom)

    2006-08-15

    Airway compression is a common problem in children with certain forms of congenital heart disease. Although various surgical approaches are available to overcome this form of airway obstruction, internal stenting is necessary in a minority of patients. It can be difficult to assess the success of stenting at the time of the procedure, and the interval to successful extubation is usually used as an outcome measure. Measurement of relevant parameters of respiratory physiology with flow-volume and volume-pressure loops permits immediate quantitative assessment of the adequacy of stenting. A 3-month-old infant who underwent bronchial stenting and physiological assessment at the time of the procedure is described. (orig.)

  18. The contribution of health technology assessment, health needs assessment, and health impact assessment to the assessment and translation of technologies in the field of public health genomics.

    Science.gov (United States)

    Rosenkötter, N; Vondeling, H; Blancquaert, I; Mekel, O C L; Kristensen, F B; Brand, A

    2011-01-01

    The European Union has named genomics as one of the promising research fields for the development of new health technologies. Major concerns with regard to these fields are, on the one hand, the rather slow and limited translation of new knowledge and, on the other hand, missing insights into the impact on public health and health care practice of those technologies that are actually introduced. This paper aims to give an overview of the major assessment instruments in public health [health technology assessment (HTA), health needs assessment (HNA) and health impact assessment (HIA)] which could contribute to the systematic translation and assessment of genomic health applications by focussing at population level and on public health policy making. It is shown to what extent HTA, HNA and HIA contribute to translational research by using the continuum of translational research (T1-T4) in genomic medicine as an analytic framework. The selected assessment methodologies predominantly cover 2 to 4 phases within the T1-T4 system. HTA delivers the most complete set of methodologies when assessing health applications. HNA can be used to prioritize areas where genomic health applications are needed or to identify infrastructural needs. HIA delivers information on the impact of technologies in a wider scope and promotes informed decision making. HTA, HNA and HIA provide a partly overlapping and partly unique set of methodologies and infrastructure for the translation and assessment of genomic health applications. They are broad in scope and go beyond the continuum of T1-T4 translational research regarding policy translation.

  19. Independent Orbiter Assessment (IOA): Assessment of the electrical power distribution and control subsystem, volume 1

    Science.gov (United States)

    Schmeckpeper, K. R.

    1988-01-01

    The results of the Independent Orbiter Assessment (IOA) of the Failure Modes and Effects Analysis (FMEA) and Critical Items List (CIL) are presented. The IOA first completed an analysis of the Electrical Power Distribution and Control (EPD and C) hardware, generating draft failure modes and potential critical items. To preserve independence, this analysis was accomplished without reliance upon the results contained within the NASA FMEA/CIL documentation. The IOA results were then compared to the NASA FMEA/CIL baseline with proposed Post 51-L updates included. A resolution of each discrepancy from the comparison is provided through additional analysis as required. This report documents the results of that comparison for the Orbiter EPD and C hardware. The IOA product for the EPD and C analysis consisted of 1671 failure mode analysis worksheets that resulted in 468 potential critical items being identified. Comparison was made to the proposed NASA Post 51-L baseline which consisted of FMEAs and 158 CIL items. Volume 1 contains the EPD and C subsystem description, analysis results, ground rules and assumptions, and some of the IOA worksheets.

  20. Automated Assessment of Right Ventricular Volumes and Function Using Three-Dimensional Transesophageal Echocardiography.

    Science.gov (United States)

    Nillesen, Maartje M; van Dijk, Arie P J; Duijnhouwer, Anthonie L; Thijssen, Johan M; de Korte, Chris L

    2016-02-01

    Assessment of right ventricular (RV) function is known to be of diagnostic value in patients with RV dysfunction. Because of its complex anatomic shape, automated determination of the RV volume is difficult and strong reliance on geometric assumptions is not desired. A method for automated RV assessment was developed using three-dimensional (3-D) echocardiography without relying on a priori knowledge of the cardiac anatomy. A 3-D adaptive filtering technique that optimizes the discrimination between blood and myocardium was applied to facilitate endocardial border detection. Filtered image data were incorporated in a segmentation model to automatically detect the endocardial RV border. End-systolic and end-diastolic RV volumes, as well as ejection fraction, were computed from the automatically segmented endocardial surfaces and compared against reference volumes manually delineated by two expert cardiologists. The results reported good performance in terms of correlation and agreement with the results from the reference volumes.

  1. New municipal solid waste processing technology reduces volume and provides beneficial reuse applications for soil improvement and dust control

    Science.gov (United States)

    A garbage-processing technology has been developed that shreds, sterilizes, and separates inorganic and organic components of municipal solid waste. The technology not only greatly reduces waste volume, but the non-composted byproduct of this process, Fluff®, has the potential to be utilized as a s...

  2. Identification and assessment of site treatment plan implementation opportunities for emerging technologies

    Energy Technology Data Exchange (ETDEWEB)

    Bernard, E.A. [Sandia National Labs., Germantown, MD (United States)

    1995-12-31

    The Department of Energy (DOE), in response to the 1992 Federal Facility Compliance Act, has prepared Site Treatment Plans (STP) for the approximately 2,000 waste streams identified within its mixed waste inventory Concurrently, emerging mixed waste treatment technologies are in final development. This paper defines a three-phase process to identify and assess implementation opportunities for these emerging technologies within the STP. It highlights the first phase, functional matching of expected treatment capabilities with proposed treatment requirements. Matches are based on treatment type, regulated contaminant and waste matrix type, for both capabilities and requirements. Results identify specific waste streams and volumes that could be treated by each emerging technology. A study for Plasma Hearth Process, Delphi DETOX{sup sm}, Supercritical Water Oxidation and Vitrification shows that about 200,000 ml of DOE`s mixed waste inventory can potentially be treated by one or more of these emerging technologies. Actual implementations are small fractions of the treatable inventory. Differences between potential and actual implementations must be minimized to accrue optimum benefit from implementation of emerging or alternative treatment technologies. Functional matching is the first phase in identifying and quantifying benefits, addressing technology system and treatment issues, and providing, in part, the basis for STP implementation decisions. DOE, through EM`s Office of Technology Development, has funded this work.

  3. Review of early assessment models of innovative medical technologies

    DEFF Research Database (Denmark)

    Fasterholdt, Iben; Krahn, Murray D; Kidholm, Kristian

    2017-01-01

    INTRODUCTION: Hospitals increasingly make decisions regarding the early development of and investment in technologies, but a formal evaluation model for assisting hospitals early on in assessing the potential of innovative medical technologies is lacking. This article provides an overview of models...... for early assessment in different health organisations and discusses which models hold most promise for hospital decision makers. METHODS: A scoping review of published studies between 1996 and 2015 was performed using nine databases. The following information was collected: decision context, decision...... problem, and a description of the early assessment model. RESULTS: 2362 articles were identified and 12 studies fulfilled the inclusion criteria. An additional 12 studies were identified and included in the review by searching reference lists. The majority of the 24 early assessment studies were variants...

  4. Sustainability assessment of energy technologies. Towards an integrative framework

    Energy Technology Data Exchange (ETDEWEB)

    Grunwald, Armin; Roesch, Christine [Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen (DE). Inst. for Technology Assessment and Systems Analysis (ITAS)

    2011-12-15

    To be able to design and use energy technologies with regard to the needs of sustainable development, sustainability assessments are necessary prior to the respective decisions. However, as is known, they pose methodological problems: from the difficulties of anticipation of future developments via the determination of assessment criteria through to the necessity to define sustainable development accurately enough. In this contribution, we will introduce an integrative sustainability concept which has hardly been discussed in the energy context. We will analyse this concept with respect to deriving general principles for the sustainability assessment of energy technologies. As a case study, we consider in particular the field of the use of grassland for biomass production for energetic purposes. The integrative concept is shown to provide an overall framework to carry out comprehensible and, above all, comparative sustainability assessments. More or less as a by-product, it can be demonstrated that sustainability means also in the energy sector much more than just environmental compatibility. (orig.)

  5. Health technology assessment in Iran: challenges and views.

    Science.gov (United States)

    Olyaeemanesh, Alireza; Doaee, Shila; Mobinizadeh, Mohammadreza; Nedjati, Mina; Aboee, Parisa; Emami-Razavi, Seyed Hassan

    2014-01-01

    Various decisions have been made on technology application at all levels of the health system in different countries around the world. Health technology assessment is considered as one of the best scientific tools at the service of policy- makers. This study attempts to investigate the current challenges of Iran's health technology assessment and provide appropriate strategies to establish and institutionalize this program. This study was carried out in two independent phases. In the first, electronic databases such as Medline (via Pub Med) and Scientific Information Database (SID) were searched to provide a list of challenges of Iran's health technology assessment. The views and opinions of the experts and practitioners on HTA challenges were studied through a questionnaire in the second phase which was then analyzed by SPSS Software version 16. This has been an observational and analytical study with a thematic analysis. In the first phase, seven papers were retrieved; from which, twenty- two HTA challenges in Iran were extracted by the researchers; and they were used as the base for designing a structured questionnaire of the second phase. The views of the experts on the challenges of health technology assessment were categorized as follows: organizational culture, stewardship, stakeholders, health system management, infrastructures and external pressures which were mentioned in more than 60% of the cases and were also common in the views. The identification and prioritization of HTA challenges which were approved by those experts involved in the strategic planning of the Department of Health Technology Assessment will be a step forward in the promotion of an evidence- based policy- making and in the production of comprehensive scientific evidence.

  6. Evaluation of a rotary laser body scanner for body volume and fat assessment

    OpenAIRE

    Pepper, M Reese; Freeland-Graves, Jeanne H.; Yu, Wurong; Stanforth, Philip R.; Xu, Bugao

    2010-01-01

    This paper reports the evaluation tests on the reliability and validity of a 3-dimensional (3D) laser body scanner for estimation of body volume and % fat. Repeated measures of body imaging were performed for reproducibility analysis. Validity of the instrument was assessed by comparison of measures of body volume by imaging to hydrodensitometry, and body fat was compared to hydrodensitometry and dual energy X-ray absorptiometry. Reproducibility analysis showed little difference between withi...

  7. Impact of Non-Gaussian Error Volumes on Conjunction Assessment Risk Analysis

    Science.gov (United States)

    Ghrist, Richard W.; Plakalovic, Dragan

    2012-01-01

    An understanding of how an initially Gaussian error volume becomes non-Gaussian over time is an important consideration for space-vehicle conjunction assessment. Traditional assumptions applied to the error volume artificially suppress the true non-Gaussian nature of the space-vehicle position uncertainties. For typical conjunction assessment objects, representation of the error volume by a state error covariance matrix in a Cartesian reference frame is a more significant limitation than is the assumption of linearized dynamics for propagating the error volume. In this study, the impact of each assumption is examined and isolated for each point in the volume. Limitations arising from representing the error volume in a Cartesian reference frame is corrected by employing a Monte Carlo approach to probability of collision (Pc), using equinoctial samples from the Cartesian position covariance at the time of closest approach (TCA) between the pair of space objects. A set of actual, higher risk (Pc >= 10 (exp -4)+) conjunction events in various low-Earth orbits using Monte Carlo methods are analyzed. The impact of non-Gaussian error volumes on Pc for these cases is minimal, even when the deviation from a Gaussian distribution is significant.

  8. CleanFleet. Final report: Volume 5, employee attitude assessment

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    The experiences of couriers, operations managers, vehicle handlers (refuelers), and mechanics who drove and/or worked with alternative fuel vehicles, and the attitudes and perceptions of people with these experiences, are examined. Five alternative fuels studied in the CleanFleet project are considers& compressed natural gas, propane gas, California Phase 2 reformulated gasoline, M-85, and electricity. The three major areas of interest include comparative analysis of issues such as health, safety and vehicle performance, business issues encompassing several facets of station operations, and personal commentary and opinions about the CleanFleet project and the alterative fuels. Results of the employee attitude assessment are presented as both statistical and qualitative analysis.

  9. Reactor safeguards system assessment and design. Volume I

    Energy Technology Data Exchange (ETDEWEB)

    Varnado, G.B.; Ericson, D.M. Jr.; Daniel, S.L.; Bennett, H.A.; Hulme, B.L.

    1978-06-01

    This report describes the development and application of a methodology for evaluating the effectiveness of nuclear power reactor safeguards systems. Analytic techniques are used to identify the sabotage acts which could lead to release of radioactive material from a nuclear power plant, to determine the areas of a plant which must be protected to assure that significant release does not occur, to model the physical plant layout, and to evaluate the effectiveness of various safeguards systems. The methodology was used to identify those aspects of reactor safeguards systems which have the greatest effect on overall system performance and which, therefore, should be emphasized in the licensing process. With further refinements, the methodology can be used by the licensing reviewer to aid in assessing proposed or existing safeguards systems.

  10. The NICE ADHD health technology assessment: A review and critique

    Directory of Open Access Journals (Sweden)

    Schlander Michael

    2008-01-01

    Full Text Available Abstract Background Health technology assessments (HTAs by the National Institute for Health and Clinical Excellence (NICE enjoy high levels of international attention. The present analysis addresses NICE's appraisal of methylphenidate, atomoxetine and dexamphetamine for attention-deficit/hyperactivity disorder (ADHD in children and adolescents, published in March 2006. Methods A qualitative study of NICE Technology Appraisal No. 98 was done focusing on the >600-page technology assessment report, which aimed at evaluating ADHD treatment strategies by a clinical effectiveness review and an economic analysis using meta-analytical techniques and a cost-effectiveness model. Results The technology assessment was unable to differentiate between the various drugs in terms of efficacy, and its economic model was ultimately driven by cost differences. While the assessment concluded that the economic model "clearly identified an optimal treatment strategy" with first-line dexamphetamine, the NICE appraisal committee subsequently found it impossible to distinguish between the different strategies on grounds of cost-effectiveness. Analyzing the assessment reveals gaps and inconsistencies concerning data selection (ultimately relying on a small number of short-term studies only, data synthesis (pooling of heterogeneous study designs and clinical endpoints, and economic model structure (identifying double-counting of nonresponders as a likely source of bias, alongside further methodological anomalies. Conclusion Many conclusions of the NICE technology assessment rest on shaky grounds. There remains a need for a new, state-of-the-art systematic review of ADHD treatment strategies including economic evaluation, which ideally should address outcomes beyond children's health-related quality of life, such as long-term sequelae of the disorder and caregiver burden.

  11. Relative value of pressures and volumes in assessing fluid responsiveness after valvular and coronary artery surgery.

    Science.gov (United States)

    Breukers, Rose-Marieke B G E; Trof, Ronald J; de Wilde, Rob B P; van den Berg, Paul C M; Twisk, Jos W R; Jansen, Jos R C; Groeneveld, Johan

    2009-01-01

    Cardiac function may differ after valvular (VS) and coronary artery (CAS) surgery and this may affect assessment of fluid responsiveness. The aim of the study was to compare VS and CAS in the value of cardiac filling pressures and volumes herein. There were eight consecutive patients after VS and eight after CAS, with femoral and pulmonary artery catheters in place. In each patient, five sequential fluid loading steps of 250 ml of colloid each were done. We measured central venous pressure (CVP), pulmonary artery occlusion pressure (PAOP) and, by transpulmonary thermodilution, cardiac index (CI) and global end-diastolic (GEDVI) and intrathoracic blood volume (ITBVI) indices. Fluid responsiveness was defined by a CI increase >5% or >10% per step. Global ejection fraction was lower and PAOP was higher after VS than CAS. In responding steps after VS (n=9-14) PAOP and volumes increased, while CVP and volumes increased in responding steps (n=12-19) after CAS. Baseline PAOP was lower in responding steps after VS only. Hence, baseline PAOP as well as changes in PAOP and volumes were of predictive value after VS and changes in CVP and volumes after CAS, in receiver operating characteristic curves. After VS, PAOP and volume changes equally correlated to CI changes. After CAS, only changes in CVP and volumes correlated to those in CI. While volumes are equally useful in monitoring fluid responsiveness, the predictive and monitoring value of PAOP is greater after VS than after CAS. In contrast, the CVP is of similar value as volume measurements in monitoring fluid responsiveness after CAS. The different value of pressures rather than of volumes between surgery types is likely caused by systolic left ventricular dysfunction in VS. The study suggests an effect of systolic cardiac function on optimal parameters of fluid responsiveness and superiority of the pulmonary artery catheter over transpulmonary dilution, for haemodynamic monitoring of VS patients.

  12. Accuracy of MRI volume measurements of breast lesions: comparison between automated, semiautomated and manual assessment

    Energy Technology Data Exchange (ETDEWEB)

    Rominger, Marga B.; Fournell, Daphne; Nadar, Beenarose Thanka; Figiel, Jens H.; Keil, Boris; Heverhagen, Johannes T. [Philipps University, Department of Radiology, Marburg (Germany); Behrens, Sarah N.M. [MeVis GmbH, Bremen (Germany)

    2009-05-15

    The aim of this study was to investigate the efficacy of a dedicated software tool for automated and semiautomated volume measurement in contrast-enhanced (CE) magnetic resonance mammography (MRM). Ninety-six breast lesions with histopathological workup (27 benign, 69 malignant) were re-evaluated by different volume measurement techniques. Volumes of all lesions were extracted automatically (AVM) and semiautomatically (SAVM) from CE 3D MRM and compared with manual 3D contour segmentation (manual volume measurement, MVM, reference measurement technique) and volume estimates based on maximum diameter measurement (MDM). Compared with MVM as reference method MDM, AVM and SAVM underestimated lesion volumes by 63.8%, 30.9% and 21.5%, respectively, with significantly different accuracy for benign (102.4%, 18.4% and 11.4%) and malignant (54.9%, 33.0% and 23.1%) lesions (p<0.05). Inter- and intraobserver reproducibility was best for AVM (mean difference {+-}2SD, 1.0{+-}9.7% and 1.8{+-}12.1%) followed by SAVM (4.3{+-}25.7% and 4.3{+-}7.9%), MVM (2.3{+-}38.2% and 8.6{+-}31.8%) and MDM (33.9{+-}128.4% and 9.3{+-}55.9%). SAVM is more accurate for volume assessment of breast lesions than MDM and AVM. Volume measurement is less accurate for malignant than benign lesions. (orig.)

  13. Preliminary performance assessment for the Waste Isolation Pilot Plant, December 1992. Volume 2, Technical basis

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-01

    Before disposing of transuranic radioactive waste in the Waste Isolation Pilot Plant (WIPP), the United States Department of Energy (DOE) must evaluate compliance with applicable long-term regulations of the United States Environmental Protection Agency (EPA). Sandia National Laboratories is conducting iterative performance assessments (PAs) of the WIPP for the DOE to provide interim guidance while preparing for a final compliance evaluation. This volume, Volume 2, contains the technical basis for the 1992 PA. Specifically, it describes the conceptual basis for consequence modeling and the PA methodology, including the selection of scenarios for analysis, the determination of scenario probabilities, and the estimation of scenario consequences using a Monte Carlo technique and a linked system of computational models. Additional information about the 1992 PA is provided in other volumes. Volume I contains an overview of WIPP PA and results of a preliminary comparison with the long-term requirements of the EPA`s Environmental Protection Standards for Management and Disposal of Spent Nuclear Fuel, High-Level and Transuranic Radioactive Wastes (40 CFR 191, Subpart B). Volume 3 contains the reference data base and values for input parameters used in consequence and probability modeling. Volume 4 contains uncertainty and sensitivity analyses related to the preliminary comparison with 40 CFR 191B. Volume 5 contains uncertainty and sensitivity analyses of gas and brine migration for undisturbed performance. Finally, guidance derived from the entire 1992 PA is presented in Volume 6.

  14. The Defense Science Board 1999 Summer Study Task Force on 21st Century Defense Technology Strategies. Volume 1

    Science.gov (United States)

    2016-06-07

    Study Task Force On 21ST Century Defense Technology Strategies Volume 1 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR...3. Defense Technology Strategy and Management PART 4. Strategic Agility PART 5. Analysis and Quantitative Results iii PREFACE The Defense Science...Board (DSB) 1999 Summer Study Task Force on 21st Century Defense Technology Strategies continues a series of studies that have examined key challenges

  15. Teknologvurdering, Broer og Brugere (Technology Assessment: Bridges and Users)

    DEFF Research Database (Denmark)

    Munch, Birgitte

    A critique of the scientific approaches grounding Danish technology assessments for beingnon-reflexive upon the consequences of its biased treatment of who and how some countsas ‘users'. Implications and new approaches are outlined in a story of engineering designers conceptualization of ships...

  16. Assessment, Technology and Democratic Education in the Age of Data

    Science.gov (United States)

    Perrotta, Carlo

    2013-01-01

    This paper contends that powerful techniques to manipulate data, enabled by technological and economic developments, can be easily co-opted to serve the restrictive frameworks of hyper-controlling, managerial accountability that characterise current cultures of summative assessment in education. In response to these challenges, research is…

  17. Nutrition and health technology assessment: When two worlds meet

    NARCIS (Netherlands)

    M.J. Poley (Marten)

    2015-01-01

    textabstractThere is a growing recognition that nutrition may have a positive impact on public health and that it may reduce medical expenditures. Yet, such claims need to be substantiated by evidence. This evidence could be delivered by health technology assessment (HTA), which can be thought of as

  18. Integrating ethics in health technology assessment: many ways to Rome

    NARCIS (Netherlands)

    Hofmann, B.; Oortwijn, W.; Lysdahl, K. Bakke; Refolo, P.; Sacchini, D.; Wilt, G.J. van der; Gerhardus, A.

    2015-01-01

    OBJECTIVES: The aim of this study was to identify and discuss appropriate approaches to integrate ethical inquiry in health technology assessment (HTA). METHODS: The key question is how ethics can be integrated in HTA. This is addressed in two steps: by investigating what it means to integrate ethic

  19. Mapping of health technology assessment in selected countries

    NARCIS (Netherlands)

    Oortwijn, W.; Broos, P.; Vondeling, H.; Banta, D.; Todorova, L.

    2013-01-01

    Objectives: The aim of this study was to develop and apply an instrument to map the level of health technology assessment (HTA) development at country level in selected countries. We examined middle-income countries (Argentina, Brazil, India, Indonesia, Malaysia, Mexico, and Russia) and countries we

  20. Condition Assessment Technologies for Water Transmission and Distribution Systems

    Science.gov (United States)

    As part of the U.S. Environmental Protection Agency’s (EPA’s) Aging Water Infrastructure Research Program, this research was conducted to identify and characterize the state of the technology for structural condition assessment of drinking water transmission and distribution syst...

  1. Developmental toxicity testing for safety assessment: new approaches and technologies.

    Science.gov (United States)

    Knudsen, Thomas B; Kavlock, Robert J; Daston, George P; Stedman, Donald; Hixon, Mary; Kim, James H

    2011-10-01

    The ILSI Health and Environmental Sciences Institute's Developmental and Reproductive Toxicology Technical Committee held a 2-day workshop entitled "Developmental Toxicology-New Directions" in April 2009. The fourth session of this workshop focused on new approaches and technologies for the assessment of developmental toxicology. This session provided an overview of the application of genomics technologies for developmental safety assessment, the use of mouse embryonic stem cells to capture data on developmental toxicity pathways, dynamical cell imaging of zebrafish embryos, the use of computation models of development pathways and systems, and finally, high-throughput in vitro approaches being utilized by the EPA ToxCast program. Issues discussed include the challenges of anchoring in vitro predictions to relevant in vivo endpoints and the need to validate pathway-based predictions with targeted studies in whole animals. Currently, there are 10,000 to 30,000 chemicals in world-wide commerce in need of hazard data for assessing potential health risks. The traditional animal study designs for assessing developmental toxicity cannot accommodate the evaluation of this large number of chemicals, requiring that alternative technologies be utilized. Though a daunting task, technologies are being developed and utilized to make that goal reachable. © 2011 Wiley Periodicals, Inc.

  2. Early phase Technology Assessment of nanotechnology in oncology

    NARCIS (Netherlands)

    Retèl, Valesca P.; Hummel, Marjan J.M.; Harten, van Willem H.

    2008-01-01

    To perform early Technology Assessment (TA) of nanotechnology in oncology. The possibilities of nanotechnology for detection (imaging), diagnosis and treatment of cancer are subject of different research programs where major investments are concerned. As a range of bio- nanotechnologies is expected

  3. Technology assessment of automation trends in the modular home industry

    Science.gov (United States)

    Phil Mitchell; Robert Russell Hurst

    2009-01-01

    This report provides an assessment of technology used in manufacturing modular homes in the United States, and that used in the German prefabricated wooden home industry. It is the first step toward identifying the research needs in automation and manufacturing methods that will facilitate mass customization in the home manufacturing industry. Within the United States...

  4. Reimbursement of pharmaceuticals: Reference pricing versus health technology assessment

    NARCIS (Netherlands)

    M. Drummond (Michael); B. Jönsson (Bengt); F.F.H. Rutten (Frans); T. Stargardt (Tom)

    2011-01-01

    textabstractReference pricing and health technology assessment are policies commonly applied in order to obtain more value for money from pharmaceuticals. This study focussed on decisions about the initial price and reimbursement status of innovative drugs and discussed the consequences for market a

  5. Framework for dementia Quality of Life assessment with Assistive Technology

    DEFF Research Database (Denmark)

    Peterson, Carrie Beth; Prasad, Neeli R.; Prasad, Ramjee

    2010-01-01

    This paper proposes a theoretical framework for a Quality of Life (QOL) evaluation tool that is sensitive, flexible, computerized, and specific to assistive technology (AT) for dementia care. Using the appropriate evaluation tool serves to improve methodologies that are used for AT assessment...

  6. The Post-implementation Assessment of Advanced Technology Utilization

    Directory of Open Access Journals (Sweden)

    Hynek Josef

    2012-09-01

    Full Text Available Efficient utilization of advanced manufacturing technology is usually seen as one of the crucial factors in achieving competitiveness on global markets. On the other hand, there are many problems associated with the advanced technology utilization. These problems could be related to the individual phases of the relevant project life cycle - starting from the early stages of AMT projects preparation and evaluation, through various problems related to the project implementation, its integration within the company environment, up to the issues related to the efficient utilization of the already deployed system. This paper focuses on the final stage of this processwhen the post-implementation assessment should be carried out in order to determine whether all initial expectations and objectives were met and whether all the originally promised benefits were delivered. Typical problems of technology benefits evaluation together with various methods, concepts as well as metrics used in the process of the assessment will be discussed here in particular.

  7. Integration of tablet technologies in the e-laboratory of cytology: a health technology assessment.

    Science.gov (United States)

    Giansanti, Daniele; Pochini, Marco; Giovagnoli, Maria Rosaria

    2014-10-01

    Although tablet systems are becoming a powerful technology, particularly useful in every application of medical imaging, to date no one has investigated the acceptance and performance of this technology in digital cytology. The specific aims of the work were (1) to design a health technology assessment (HTA) tool to assess, in terms of performance and acceptance, the introduction of tablet technologies (wearable, portable, and non portable) in the e-laboratories of cytology and (2) to test the tool in a first significant application of digital cytology. An HTA tool was proposed operating on a domain of five dimensions of investigation comprising the basic information of the product of digital cytology, the perceived subjective quality of images, the assessment of the virtual navigation on the e-slide, the assessment of the information and communication technologies features, and the diagnostic power. Six e-slides regarding studies of cervicovaginal cytology digitalized by means of an Aperio ( www.aperio.com ) scanner and uploaded onto the www.digitalslide.it Web site were used for testing the methodology on three different network connections. Three experts of cytology successfully tested the methodology on seven tablets found suitable for the study in their own standard configuration. Specific indexes furnished by the tool indicated both a high degree of performance and subjective acceptance of the investigated technology. The HTA tool thus could be useful to investigate new tablet technologies in digital cytology and furnish stakeholders with useful information that may help them make decisions involving the healthcare system. From a global point of view the study demonstrates the feasibility of using the tablet technology in digital cytology.

  8. Early phase Technology Assessment of nanotechnology in oncology.

    Science.gov (United States)

    Retèl, Valesca P; Hummel, Marjan J M; van Harten, Willem H

    2008-01-01

    To perform early Technology Assessment (TA) of nanotechnology in oncology. The possibilities of nanotechnology for detection (imaging), diagnosis and treatment of cancer are subject of different research programs where major investments are concerned. As a range of bio- nanotechnologies is expected to enter the oncology field it is relevant to consider the various aspects involved in especially early TA. This article provides two cases of early assessment of (predecessors of) nanotechnologies: Microarray Analysis and Photodynamic Therapy implementation, which methodology can be extrapolated to other nanotechnologies in oncology. Constructive Technology Assessment (CTA) is used for the introduction of technologies that are still in a dynamic phase of development or in an early stage of diffusion. The selection of studied aspects in CTA is based on: clinical aspects (safety, efficacy, and effectiveness), economic (cost-effectiveness), patient related (QoL, ethical/juridical and psychosocial), organizational aspects (diffusion and adoption) and scenario drafting. The features of the technology and the phase of implementation are decisive for choices and timing of the specific aspects to be studied. A framework was drafted to decide on the relevant aspects. In the first case, early implementation of Microarray Analysis; clinical effectiveness, logistics, patient centeredness and scenario drafting were given priority. Related to the diffusion-phase of Photodynamic Therapy however other aspects were evaluated, such as early cost-effectiveness analysis for possible reimbursement. Often CTA will result in a mixed method design. Especially scenario drafting is a powerful instrument to predict possible developments that can be anticipated upon in the assessment. CTA is appropriate for the study of early implementation of new technologies in oncology. In early TA small series often necessitate a mix of quantitative and qualitative methods. The features of nanotechnology

  9. Human factors assessments of innovative technologies: Robotics sector

    Energy Technology Data Exchange (ETDEWEB)

    Moran, J.B. [Operating Engineers National Hazmat Program, Beaver, WV (United States)

    1997-12-01

    The U.S. Department of Energy (DOE) has funded major environmental technology developments over the past several years. One area that received significant attention is robotics, which has resulted in the development of a wide range of unique robotic systems tailored to the many tasks unique to the DOE complex. These systems are often used in highly hazardous environments, which reduces or eliminates worker exposures. The DOE, concurrent with the technology development initiative, also established and funded a 5-yr cooperative agreement intended to interface with the technology development community-with specific attention to the occupational safety and health aspects associated with individual technologies through human factors and hazard assessments. This program is now in its third year.

  10. Readings in technology assessment. [in relation to social impact and the law

    Science.gov (United States)

    1975-01-01

    Papers are presented which reflect research in the following areas: development of the concept of technology assessment; institutionalization of technology assessment; the interface between law and technology assessment; and assessment case studies. Case studies include hazards of the medical use of X-rays, environmental noise effects in transportation planning, genetic technology, impact of underground coal mining, and aircraft/airport noise abatement.

  11. DECISION ANALYSIS AND TECHNOLOGY ASSESSMENTS FOR METAL AND MASONRY DECONTAMINATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian, Ph.D.

    1999-01-01

    The purpose of this investigation was to conduct a comparative analysis of innovative technologies for the non-aggressive removal of coatings from metal and masonry surfaces and the aggressive removal of one-quarter to one-inch thickness of surface from structural masonry. The technologies tested should be capable of being used in nuclear facilities. Innovative decontamination technologies are being evaluated under standard, non-nuclear conditions at the FIU-HCET technology assessment site in Miami, Florida. This study is being performed to support the OST, the Deactivation and Decommissioning (D&D) Focus Area, and the environmental restoration of DOE facilities throughout the DOE complex by providing objective evaluations of currently available decontamination technologies.

  12. Methods of synthesizing qualitative research studies for health technology assessment.

    Science.gov (United States)

    Ring, Nicola; Jepson, Ruth; Ritchie, Karen

    2011-10-01

    Synthesizing qualitative research is an important means of ensuring the needs, preferences, and experiences of patients are taken into account by service providers and policy makers, but the range of methods available can appear confusing. This study presents the methods for synthesizing qualitative research most used in health research to-date and, specifically those with a potential role in health technology assessment. To identify reviews conducted using the eight main methods for synthesizing qualitative studies, nine electronic databases were searched using key terms including meta-ethnography and synthesis. A summary table groups the identified reviews by their use of the eight methods, highlighting the methods used most generally and specifically in relation to health technology assessment topics. Although there is debate about how best to identify and quality appraise qualitative research for synthesis, 107 reviews were identified using one of the eight main methods. Four methods (meta-ethnography, meta-study, meta-summary, and thematic synthesis) have been most widely used and have a role within health technology assessment. Meta-ethnography is the leading method for synthesizing qualitative health research. Thematic synthesis is also useful for integrating qualitative and quantitative findings. Four other methods (critical interpretive synthesis, grounded theory synthesis, meta-interpretation, and cross-case analysis) have been under-used in health research and their potential in health technology assessments is currently under-developed. Synthesizing individual qualitative studies has becoming increasingly common in recent years. Although this is still an emerging research discipline such an approach is one means of promoting the patient-centeredness of health technology assessments.

  13. Nuclear proliferation and civilian nuclear power. Report of the Nonproliferation Alternative Systems Assessment Program. Volume IX. Reactor and fuel cycle description

    Energy Technology Data Exchange (ETDEWEB)

    1980-06-01

    The Nonproliferation Alterntive Systems Assessment Program (NASAP) has characterized and assessed various reactor/fuel-cycle systems. Volume IX provides, in summary form, the technical descriptions of the reactor/fuel-cycle systems studied. This includes the status of the system technology, as well as a discussion of the safety, environmental, and licensing needs from a technical perspective. This information was then used in developing the research, development, and demonstration (RD and D) program, including its cost and time frame, to advance the existing technology to the level needed for commercial use. Wherever possible, the cost data are given as ranges to reflect the uncertainties in the estimates.

  14. Underground Test Area Subproject Phase I Data Analysis Task. Volume VIII - Risk Assessment Documentation Package

    Energy Technology Data Exchange (ETDEWEB)

    None

    1996-12-01

    Volume VIII of the documentation for the Phase I Data Analysis Task performed in support of the current Regional Flow Model, Transport Model, and Risk Assessment for the Nevada Test Site Underground Test Area Subproject contains the risk assessment documentation. Because of the size and complexity of the model area, a considerable quantity of data was collected and analyzed in support of the modeling efforts. The data analysis task was consequently broken into eight subtasks, and descriptions of each subtask's activities are contained in one of the eight volumes that comprise the Phase I Data Analysis Documentation.

  15. Health technology assessment in India: the potential for improved healthcare decision-making.

    Science.gov (United States)

    Kumar, Mrityunjai; Ebrahim, Shah; Taylor, Fiona C; Chokshi, Maulik; Gabbay, John

    2014-01-01

    Health technology assessment (HTA) is a multidisciplinary approach that uses clinical effectiveness, cost-effectiveness, policy and ethical perspectives to provide evidence upon which rational decisions on the use of health technologies can be made. It can be used for a single stand-alone technology (e.g. a drug, a device), complex interventions (e.g. a rehabilitation service) and can also be applied to individual patient care and to public health. It is a tool for enabling the assessment and comparison of health technologies using the same metric of cost-effectiveness. This process benefits the patient, the health service, the healthcare payer and the technology producer as only technologies that are considered cost-effective are promoted for widespread use. This leads to greater use of effective technologies and greater health gain. The decision-making process in healthcare in India is complex owing to multiplicity of organizations with overlapping mandates. Often the decision-making is not evidence-based and there is no mechanism of bridging the gap between evidence and policy. Elsewhere, HTA is a frequently used tool in informing policy decisions in both resource-rich and resource-poor countries. Despite national organizations producing large volumes of research and clinical guidelines, India has not yet introduced a formal HTA programme. The incremental growth in healthcare products, services, innovation in affordable medical devices and a move towards universal healthcare, needs to be underpinned with an evidencebase which focuses on effectiveness, safety, affordability and acceptability to maximize the benefits that can be gained with a limited healthcare budget. Establishing HTA as a formal process in India, independent of healthcare providers, funders and technology producers, together with a framework for linking HTA to policy-making, would help ensure that the population gets better access to appropriate healthcare in the future.

  16. Technology Assessment and Roadmap for the Emergency Radiation Dose Assessment Program

    Energy Technology Data Exchange (ETDEWEB)

    Turteltaub, K W; Hartman-Siantar, C; Easterly, C; Blakely, W

    2005-10-03

    A Joint Interagency Working Group (JIWG) under the auspices of the Department of Homeland Security Office of Research and Development conducted a technology assessment of emergency radiological dose assessment capabilities as part of the overall need for rapid emergency medical response in the event of a radiological terrorist event in the United States. The goal of the evaluation is to identify gaps and recommend general research and development needs to better prepare the Country for mitigating the effects of such an event. Given the capabilities and roles for responding to a radiological event extend across many agencies, a consensus of gaps and suggested development plans was a major goal of this evaluation and road-mapping effort. The working group consisted of experts representing the Departments of Homeland Security, Health and Human Services (Centers for Disease Control and the National Institutes of Health), Food and Drug Administration, Department of Defense and the Department of Energy's National Laboratories (see appendix A for participants). The specific goals of this Technology Assessment and Roadmap were to: (1) Describe the general context for deployment of emergency radiation dose assessment tools following terrorist use of a radiological or nuclear device; (2) Assess current and emerging dose assessment technologies; and (3) Put forward a consensus high-level technology roadmap for interagency research and development in this area. This report provides a summary of the consensus of needs, gaps and recommendations for a research program in the area of radiation dosimetry for early response, followed by a summary of the technologies available and on the near-term horizon. We then present a roadmap for a research program to bring present and emerging near-term technologies to bear on the gaps in radiation dose assessment and triage. Finally we present detailed supporting discussion on the nature of the threats we considered, the status of

  17. Stochastic modeling of the tumor volume assessment and growth patterns in hepatocellular carcinoma.

    Science.gov (United States)

    Sãftoiu, Adrian; Ciurea, Tudorel; Gorunescu, Florin; Rogoveanu, Ion; Georgescu, Claudia

    2004-06-01

    The growth pattern of hepatocellular carcinoma (HCC) arising from cirrhosis is variable and depends on the degree of differentiation and vascularization. Because growth is not constant in the natural history of HCC, prediction of subsequent growth rate based on tumor volume doubling time and correlation with histological and ultrasonographical characteristics at the moment of initial diagnosis are usually unreliable. The aim of our study was to assess the growth patterns of HCC with the aid of stochastic modeling. Thus, we included in our study 27 patients with histologically proven HCC, which had multiple (more than three)follow-up ultrasound studies in a six months interval. The patients did not receive any treatment during the observation period. HCC was visualized by computer aided ultrasound imaging, obtaining both the primary size quantification and the edge-detection enhancement. By a bi-cubic B-spline interpolation of points on the edges (3-D Bezier approximation) we approximated the surfaces shapes, and using the hit or miss Monte Carlo method we accurately estimate the tumor volume. Starting from the previous tumor volumes time series recorded during the first six months of evolution we applied both a linear, exponential and logarithmic smoothing to forecast the future size of the HCC tumor in the next six months. Our conclusion was that a dynamic forecasting model of HCC volumes could be very accurate for the assessment of tumor volume doubling time usually obtained by two discrete volume measurements of the tumor.

  18. Multiple criteria decision analysis for health technology assessment.

    Science.gov (United States)

    Thokala, Praveen; Duenas, Alejandra

    2012-12-01

    Multicriteria decision analysis (MCDA) has been suggested by some researchers as a method to capture the benefits beyond quality adjusted life-years in a transparent and consistent manner. The objectives of this article were to analyze the possible application of MCDA approaches in health technology assessment and to describe their relative advantages and disadvantages. This article begins with an introduction to the most common types of MCDA models and a critical review of state-of-the-art methods for incorporating multiple criteria in health technology assessment. An overview of MCDA is provided and is compared against the current UK National Institute for Health and Clinical Excellence health technology appraisal process. A generic MCDA modeling approach is described, and the different MCDA modeling approaches are applied to a hypothetical case study. A comparison of the different MCDA approaches is provided, and the generic issues that need consideration before the application of MCDA in health technology assessment are examined. There are general practical issues that might arise from using an MCDA approach, and it is suggested that appropriate care be taken to ensure the success of MCDA techniques in the appraisal process. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

  19. Conjunction Assessment Screening Volume Sizing and Event Filtering in Light of Natural Conjunction Event Development Behaviors

    Science.gov (United States)

    Hejduk, M. D.; Pachura, D. A.

    2017-01-01

    Conjunction Assessment screening volumes used in the protection of NASA satellites are constructed as geometric volumes about these satellites, of a size expected to capture a certain percentage of the serious conjunction events by a certain time before closest approach. However, the analyses that established these sizes were grounded on covariance-based projections rather than empirical screening results, did not tailor the volume sizes to ensure operational actionability of those results, and did not consider the adjunct ability to produce data that could provide prevenient assistance for maneuver planning. The present study effort seeks to reconsider these questions based on a six-month dataset of empirical screening results using an extremely large screening volume. The results, pursued here for a highly-populated orbit regime near 700 km altitude, identify theoretical limits of screening volume performance, explore volume configuration to facilitate both maneuver remediation planning as well as basic asset protection, and recommend sizing principles that maximize volume performance while minimizing the capture of "chaff" conjunctions that are unlikely ever to become serious events.

  20. Technological and life cycle assessment of organics processing odour control technologies.

    Science.gov (United States)

    Bindra, Navin; Dubey, Brajesh; Dutta, Animesh

    2015-09-15

    As more municipalities and communities across developed world look towards implementing organic waste management programmes or upgrading existing ones, composting facilities are emerging as a popular choice. However, odour from these facilities continues to be one of the most important concerns in terms of cost & effective mitigation. This paper provides a technological and life cycle assessment of some of the different odour control technologies and treatment methods that can be implemented in organics processing facilities. The technological assessment compared biofilters, packed tower wet scrubbers, fine mist wet scrubbers, activated carbon adsorption, thermal oxidization, oxidization chemicals and masking agents. The technologies/treatment methods were evaluated and compared based on a variety of operational, usage and cost parameters. Based on the technological assessment it was found that, biofilters and packed bed wet scrubbers are the most applicable odour control technologies for use in organics processing faculties. A life cycle assessment was then done to compare the environmental impacts of the packed-bed wet scrubber system, organic (wood-chip media) bio-filter and inorganic (synthetic media) bio-filter systems. Twelve impact categories were assessed; cumulative energy demand (CED), climate change, human toxicity, photochemical oxidant formation, metal depletion, fossil depletion, terrestrial acidification, freshwater eutrophication, marine eutrophication, terrestrial eco-toxicity, freshwater eco-toxicity and marine eco-toxicity. The results showed that for all impact categories the synthetic media biofilter had the highest environmental impact, followed by the wood chip media bio-filter system. The packed-bed system had the lowest environmental impact for all categories.

  1. Evaluation of a rotary laser body scanner for body volume and fat assessment.

    Science.gov (United States)

    Pepper, M Reese; Freeland-Graves, Jeanne H; Yu, Wurong; Stanforth, Philip R; Xu, Bugao

    2010-07-08

    This paper reports the evaluation tests on the reliability and validity of a 3-dimensional (3D) laser body scanner for estimation of body volume and % fat. Repeated measures of body imaging were performed for reproducibility analysis. Validity of the instrument was assessed by comparison of measures of body volume by imaging to hydrodensitometry, and body fat was compared to hydrodensitometry and dual energy X-ray absorptiometry. Reproducibility analysis showed little difference between within-subjects measurements of volume (ICC ≥ 0.99, p laser body scanner and hydrodensitometry were strongly related (r = 0.99, p 0.05). These findings indicate that the 3D laser body scanner is a reliable and valid technique for the estimation of body volume. Furthermore, body imaging is an accurate measure of body fat, as compared to dual energy X-ray absorptiometry. This new instrument is promising as a quick, simple to use, and inexpensive method of body composition analysis.

  2. Technology, safety and costs of decommissioning a reference small mixed oxide fuel fabrication plant. Volume 2. Appendices

    Energy Technology Data Exchange (ETDEWEB)

    Jenkins, C. E.; Murphy, E. S.; Schneider, K. J.

    1979-01-01

    Volume 2 contains appendixes on small MOX fuel fabrication facility description, site description, residual radionuclide inventory estimates, decommissioning, financing, radiation dose methodology, general considerations, packaging and shipping of radioactive materials, cost assessment, and safety (JRD)

  3. The study of the life cycle of technology assessment model

    Institute of Scientific and Technical Information of China (English)

    SHEN Yu-Zhi; HUANG Xun-jiang

    2001-01-01

    The life cycle of technology is one of the most important indexes to weigh up the risk of the investment to neo-tech. There are so many uncertainties because it is conditioned by a lot of factors, we can not make a rational forecasting by traditional assessment method. So this paper gives a conprehensive consideration to the factors that influence production and makes some modification to production function, and establishes the life cycle of technology assessmet model by the method of fuzzy mathematics. So it quantifies the risk of investment. We can take it as one foundational index for the decision making of the investment.

  4. Knowledge in health technology assessment: who, what, how?

    Science.gov (United States)

    Tjørnhøj-Thomsen, Tine; Hansen, Helle Ploug

    2011-10-01

    Health systems are placing more and more emphasis on designing and delivering services that are focused on the patient, and there is a growing interest in patient aspects of health policy research and health technology assessment (HTA). Only a few HTA agencies use and invest in scientific methods to generate knowledge and evidence about the patient aspects of a given technology. This raises questions about how knowledge is produced in HTA reports and what kind of knowledge is considered relevant. This article uses a Danish HTA on patient education from 2009 as empirical material for a critical examination and discussion of knowledge and knowledge production about the patient aspects of HTA.

  5. Prioritizing Information Technology Investments: Assessing the Correlations among Technological Readiness, Information Technology Flexibility, and Information Technology Effectiveness

    Science.gov (United States)

    Walter, John T.

    2010-01-01

    Management's dilemma, when allocating financial resources towards the improvement of technological readiness and IT flexibility within their organizations, is to control financial risk and maximize IT effectiveness. Technological readiness is people's propensity to embrace and use technology. Its drivers are optimism, innovativeness, discomfort,…

  6. Proceedings of The Twentieth International Symposium on Space Technology and Science. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-10-31

    The 20th international symposium on space technology and science was held in Nagaragawa city, Gifu prefecture on May 19-25, 1996, and 401 papers were made public. Out of those, 112 papers were summed up as Volume 2 following the previous Volume 1. As to space transportation, the paper included reports titled as follows: Conceptual study of H-IIA rocket (upgraded H-II rocket); Test flight of the launch vehicle; International cooperation in space transportation; etc. Concerning microgravity science, Recent advances in microgravity research; Use of microgravity environment to investigate the effect of magnetic field on flame shape; etc. Relating to satellite communications and broadcasting, `Project GENESYS`: CRL`s R and D project for realizing high data rate satellite communications networks; The Astrolink {sup TM/SM} system; etc. Besides, the paper contained reports on the following fields: lunar and planetary missions and utilization, space science and balloons, earth observations, life science and human presence, international cooperation and space environment, etc

  7. Hanford Tank Farm Vapors Abatement Technology and Vendor Proposals Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Burns, H. H. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Farrar, M. E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Fink, S. D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-09-20

    Suspected chemical vapor releases from the Hanford nuclear waste tank system pose concerns for worker exposure. Washington River Protection Solutions (WRPS) contracted the Savannah River National Laboratory (SRNL) to explore abatement technologies and strategies to remediate the vapors emitted through the ventilation system. In response, SRNL conducted an evaluation of technologies to abate, or reduce, vapor emissions to below 10% of the recognized occupational exposure limits (OELs). The evaluation included a review of published literature and a broadly communicated Request for Information to commercial vendors through a Federal Business Opportunities (Fed Biz Opps) web posting. In addition, SRNL conducted a workshop and post-workshop conference calls with interested suppliers (vendors) to assess proposals of relevant technologies. This report reviews applicable technologies and summarizes the approaches proposed by the vendors who participated in the workshop and teleconference interviews. In addition, the report evaluates the estimated performance of the individual technologies for the various classes of chemical compounds present in the Hanford Chemicals of Potential Concern (COPCs) list. Similarly, the report provides a relative evaluation of the vendor proposed approaches against criteria of: technical feasibility (and maturity), design features, operational considerations, secondary waste generation, safety/regulatory, and cost / schedule. These rough order-of-magnitude (ROM) cost estimates are intended to provide a comparison basis between technologies and are not intended to be actual project estimates.

  8. Hanford Tank Farm Vapors Abatement Technology and Vendor Proposals Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Burns, H. H. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Farrar, M. E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Fink, S. D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-09-20

    Suspected chemical vapor releases from the Hanford nuclear waste tank system pose concerns for worker exposure. Washington River Protection Solutions (WRPS) contracted the Savannah River National Laboratory (SRNL) to explore abatement technologies and strategies to remediate the vapors emitted through the ventilation system. In response, SRNL conducted an evaluation of technologies to abate, or reduce, vapor emissions to below 10% of the recognized occupational exposure limits (OELs). The evaluation included a review of published literature and a broadly communicated Request for Information to commercial vendors through a Federal Business Opportunities (Fed Biz Opps) web posting. In addition, SRNL conducted a workshop and post-workshop conference calls with interested suppliers (vendors) to assess proposals of relevant technologies. This report reviews applicable technologies and summarizes the approaches proposed by the vendors who participated in the workshop and teleconference interviews. In addition, the report evaluates the estimated performance of the individual technologies for the various classes of chemical compounds present in the Hanford Chemicals of Potential Concern (COPCs) list. Similarly, the report provides a relative evaluation of the vendor proposed approaches against criteria of: technical feasibility (and maturity), design features, operational considerations, secondary waste generation, safety/regulatory, and cost / schedule. These rough order magnitude (ROM) cost estimates are intended to provide a comparison basis between technologies and are not intended to be actual project estimates.

  9. Recent Life Assessment Technology for Existing Steam Turbines

    Science.gov (United States)

    Saito, Kiyoshi; Sakuma, Akira; Fukuda, Masataka

    A large and growing portion of electricity is produced by aging thermal power plants. Although excellent, high quality materials such as CrMoV steel and 12% Cr steel, etc. are used for the steam turbines, various forms of metallurgical degradation, due to creep and fatigue, etc. affect the parts and components during long-term operation at high temperature. Extending the life of steam turbines and ensuring high reliability requires life assessment technology, scheduled repairing, conversion, modification and upgrading of components in order to provide a stable power supply. As the high temperature parts and components of aged steam turbines are mainly metallurgically damaged by creep, fatigue and the interaction of both, life assessment combined with analytical and nondestructive methods is essential for realizing strategic plant life extension. We have developed a life assessment technology that takes material degradation into consideration, and have applied the procedure to more than 650 units and 2500 components since 1983. A rotor bore replication device was developed in 1989 for the purpose of nondestructive observation of creep voids and supporting the validity of life prediction results. This paper describes the technical features and applied experience of recent life assessment technology for existing high temperature steam turbines.

  10. Chronic upper airway obstruction: value of the flow volume loop examination in assessment and management.

    Science.gov (United States)

    Brookes, G B; Fairfax, A J

    1982-06-01

    Chronic obstructive lesions of the upper airways such as post-traumatic strictures, bilateral vocal cord paralysis and chronic inflammatory foci are uncommon. The functional assessment of the severity and character of an obstruction is important both for diagnosis and management, and may also allow evaluation of the efficacy of medical and surgical treatment. There are limitations of simple spirometric pulmonary function tests, which are evident when assessing upper airways obstruction. The flow volume loop is a graphic recording of airflow during maximal respiration and expiration at different lung volumes, and may be affected in a characteristic way by alterations in the airway resistance. Three unusual cases of chronic upper airway obstruction are presented which illustrate the value of the flow volume loop examination in their management.

  11. Physical activity and quality of life: assessing the influence of activity frequency, intensity, volume, and motives.

    Science.gov (United States)

    Lustyk, M Kathleen B; Widman, Laura; Paschane, Amy A E; Olson, Karen C

    2004-01-01

    In the present study, the authors investigated the impact of exercise frequency, intensity, and volume along with exercise motives on quality of life (QOL) reports. The authors assessed exercise habits with the Godin Leisure Time Activity Scale and measured exercise motives with the Reasons for Exercise Inventory. The Quality of Life Inventory assessed satisfaction in 16 domains including health, work, and recreation. High-frequency exercisers reported significantly higher health, helping, and community-related QOL than those who exercised less frequently. The authors noted significantly higher health-related QOL in the heavy volume group compared with the other volume groups. Multiple regression tests revealed that activity intensity and exercise motives significantly predicted QOL reports. The strongest bivariate correlations with QOL existed for mild activity and exercising for fitness and health reasons. Thus, high-frequency activity of mild intensity that produces high kcal utilization and is performed to improve health and fitness has the strongest influence on QOL reports.

  12. Viability Assessment of a Repository at Yucca Mountain. Volume 3: Total System Performance Assessment

    Energy Technology Data Exchange (ETDEWEB)

    None

    1998-12-01

    This volume reports the development of TSPA for the VA. This first section defines the general process involved in developing any TSPA, it describes the overall TSPA process as implemented by programs in the US and elsewhere in the world, and discusses the acceptability of TSPA as a process or tool for analyzing a nuclear waste repository system. Section 2 discusses the more specific use of the TSPA process for the TSPA-VA for Yucca Mountain, including goals, approach, and methods. It also includes a very brief synopsis of TSPA-VA results. Section 3 briefly discusses each of the component models that comprise the TSPA-VA. Each TSPA component model represents a discrete set of processes. The TSPA-VA components are: unsaturated zone flow, thermal hydrology, near- field geochemical environment, waste package degradation, waste form alteration and mobilization, unsaturated zone transport, saturated zone flow and transport, and biosphere. For each of these components, this section introduces the conceptualization of each individual process, describes the data sources, and discusses model parameter development and computer methods used to simulate each component. Section 4 explains the mechanics of how the individual TSPA components were combined into a ''base case'' and then provides the ''expected value'' results of a deterministic base case analysis. Section 4 also contains a description of the probabilistic analyses and results that help determine the relative importance of the various TSPA components and the data used to describe the components. Section 5 addresses sensitivity studies run for each of the TSPA components to understand how uncertainty in various parameters within a component change the TSPA results. Section 6 presents the findings of the sensitivity studies run on the various components in Section 5, and prioritizes the findings of the entire set of uncertainty and sensitivity studies of the components relative

  13. German Studies in the United States: Assessment and Outlook. Monatshefte Occasional Volume Number 1.

    Science.gov (United States)

    Lohnes, Walter F. W., Ed.; Nollendorfs, Valters, Ed.

    This volume focuses on two principal aspects of German studies in the United States: (1) an assessment of the German-teaching profession from primary to graduate school, with attention to its "raison d'etre" in the present academic, social, and cultural situation, as well as its structures, aims, and personnel; and (2) strategies for survival and…

  14. Teacher Learning of Technology-Enhanced Formative Assessment

    CERN Document Server

    Beatty, Ian D; Leonard, William J; Gerace, William J; Cyr, Karen St; Lee, Hyunju; Harris, Robby

    2008-01-01

    Technology-Enhanced Formative Assessment (TEFA) is a pedagogy for teaching with classroom response technology. Teacher Learning of TEFA is a five-year research project studying teacher change, in the context of an intensive professional development program designed to help science and mathematics teachers learn TEFA. First, we provide an overview of the project's participating teachers, its intervention (consisting of the technology, the pedagogy, and the professional development program), and its research design. Then, we present narratives describing the unfolding change process experienced by four teachers. Afterward, we present some preliminary findings of the research, describe a "model for the co-evolution of teacher and pedagogy" that we are developing, and identify general implications for professional development.

  15. Proposal for a state health technology assessment program.

    Science.gov (United States)

    Colmenares, Phil

    2012-08-01

    Evidence suggests that a significant number of medical technologies are of little or no benefit to patients. Under current budgetary pressures, state health care programs cannot afford continued spending on unnecessary medical care without further cuts in enrollment. Limiting coverage of high-tech care only to indications supported by good clinical evidence would help save state health care dollars. However, there is currently no public process to formally evaluate new medical interventions in Wisconsin. In fact, new therapies often are introduced into clinical practice, and covered by state health insurance programs, even when there is weak or questionable evidence of clinical effectiveness. This article proposes the creation of a state Health Technology Assessment program in Wisconsin to systematically evaluate new tests or treatments, and to promote evidence-based coverage decisions. Such a program would help limit wasteful spending on unnecessary technologies, reinforce good clinical practice, and protect patients from the risks of interventions that have not been proven effective.

  16. Technical and economic assessment of energy conversion technologies for MSW

    Energy Technology Data Exchange (ETDEWEB)

    Livingston, W.R.

    2002-07-01

    Thermal processes for municipal solid wastes (MSW) based on pyrolysis and/or gasification that have relevance to the emerging UK market are described in this report, and the results of the technical and economical assessment of these processes are presented. The Mitsui R21 Technology, the Thermoselect Process, the Nippon Steel Waste Melting Process, the Pyropleq Process, and the Compact Power Process are selected for detailed comparison on the basis of the overall technical concept, the energy balance and the requirements for consumables, environmental performance, and the technical and commercial status of the technology. Details are also given of a comparison of the novel thermal technologies with conventional mass burn incineration for MSW.

  17. Multi-parallel open technology to enable collaborative volume visualization: how to create global immersive virtual anatomy classrooms.

    Science.gov (United States)

    Silverstein, Jonathan C; Walsh, Colin; Dech, Fred; Olson, Eric; E, Michael; Parsad, Nigel; Stevens, Rick

    2008-01-01

    Many prototype projects aspire to develop a sustainable model of immersive radiological volume visualization for virtual anatomic education. Some have focused on distributed or parallel architectures. However, very few, if any others, have combined multi-location, multi-directional, multi-stream sharing of video, audio, desktop applications, and parallel stereo volume rendering, to converge on an open, globally scalable, and inexpensive collaborative architecture and implementation method for anatomic teaching using radiological volumes. We have focused our efforts on bringing this all together for several years. We outline here the technology we're making available to the open source community and a system implementation suggestion for how to create global immersive virtual anatomy classrooms. With the releases of Access Grid 3.1 and our parallel stereo volume rendering code, inexpensive globally scalable technology is available to enable collaborative volume visualization upon an award-winning framework. Based upon these technologies, immersive virtual anatomy classrooms that share educational or clinical principles can be constructed with the setup described with moderate technological expertise and global scalability.

  18. ECASTAR: Energy Conservation; an Assessment of Systems, Technologies and Requirements

    Science.gov (United States)

    1975-01-01

    A methodology for a systems approach display and assessment of the potential for energy conservation actions and the impacts of those actions was presented. The U.S. economy is divided into four sectors: energy industry, industry, residential/commercial and transportation. Each sector is assessed with respect to energy conservation actions and impacts. The four sectors are combined and three strategies for energy conservation actions for the combined sectors are assessed. The three strategies (national energy conservation, electrification and diversification) represent energy conservation actions for the near term (now to 1985), the mid term (1985 to 2000) and the far term (2000 and beyond). The assessment procedure includes input/output analysis to bridge the flows between the sectors, and net economics and net energetics as performance criteria for the conservation actions. Targets of opportunity for large net energy net energy savings and the application of technology to achieve these savings are discussed.

  19. Implementation of Relevant Methods in Assessing Traffic-Technological Projects

    Directory of Open Access Journals (Sweden)

    Danijela Barić

    2007-09-01

    Full Text Available The assessment of investment traffic-technological projectsmeans a set of activities whose basic aim is to determine the justificationand feasibility of the projects. The decision-makingprocess, including the decision-making on investments is an extremelycomplex process, and the decision-maker has to have avision of the future and make decisions accordingly in a modemand flexible manner. Therefore, the decisions need to be theresult of a planning and research process based on relevant scientificmethods. The work includes the selected, analysed andpresented methods of cost-benefit analysis, methods of multi-criteria decision-making and SWOT (Strengths, Weaknesses,Opportunities, and Threats analysis methods. Regarding thebasic characteristics, the mentioned methods have been compared,the order of their implementation has been determined,and then they have been implemented in assessing the traffic-technological projects of reconstmction with the aim of selectingthe optimal variant solution.

  20. Environmental assessment of solid waste systems and technologies: EASEWASTE

    DEFF Research Database (Denmark)

    Kirkeby, Janus Torsten; Birgisdottir, Harpa; Hansen, Trine Lund

    2006-01-01

    to optimize current waste management systems with respect to environmental achievements and by authorities to Set Guidelines and regulations and to evaluate different strategies for handling of waste. The waste hierarchy has for decades been governing waste management but the ranking of handling approaches......A new model has been developed for evaluating the overall resource consumption and environmental impacts of municipal solid waste management systems by the use of life cycle assessment. The model is named EASEWASTE (Environmental Assessment of Solid Waste Systems and Technologies) and is able...... to compare different waste management strategies, waste treatment methods and waste process technologies. The potential environmental impacts can be traced back to the most important processes and waste fractions that contribute to the relevant impacts. A model like EASEWASTE can be used by waste planners...

  1. Hospital Based Health Technology Assessment: an example from Siena

    Directory of Open Access Journals (Sweden)

    Pietro Manzi

    2015-03-01

    Full Text Available The Health Technology Assessment (HTA has emerged in recent years as a useful tool in healthcare decision-making. It is a multidisciplinary process that summarizes information about the medical, social, economic and ethical issues related to the use of a health technology and provides evidence-based information on how to allocate resources. The experience of Siena University Hospital is an example of multidisciplinary hospital-based HTA. In the present paper we summarize the organization of HTA commission and the assessment methodology of the purchase, rental or sale of medical equipment and medical devices. Furthermore we illustrate the data concerning the commission activities in 2013.http://dx.doi.org/10.7175/fe.v16i1.943

  2. Technology assessment for removal of total dissolved solids from salty washwaters generated from vehicle washing operations

    Energy Technology Data Exchange (ETDEWEB)

    Koh, S.; Zaidi, A. [Department of the Environment, Burlington, ON (Canada). Wastewater Technology Centre

    1995-12-31

    Vehicles used by the Ministry of Transport of Ontario to clean and de-ice the province`s highways in winter months are washed during regular maintenance. This washing produces significant volumes of salty wastewater. The purpose of this study was to identify economical methods for the removal of dissolved salts from washwater produced at Ministry of Transport patrol yards. Evaporation, membrane processes and freezing technologies were assessed. Freezing technology was not considered suitable since it is still in the developmental stage. Atmospheric evaporation and electrodialysis were considered suitable for producing saline liquid concentrates from the wastewaters. Vacuum distillation and atmospheric evaporation could also be used to produce solid concentrates. 2 refs., 22 tabs., 9 figs.

  3. National Wind Technology Center sitewide, Golden, CO: Environmental assessment

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-01

    The National Renewable Energy Laboratory (NREL), the nation`s primary solar and renewable energy research laboratory, proposes to expand its wind technology research and development program activities at its National Wind Technology Center (NWTC) near Golden, Colorado. NWTC is an existing wind energy research facility operated by NREL for the US Department of Energy (DOE). Proposed activities include the construction and reuse of buildings and facilities, installation of up to 20 wind turbine test sites, improvements in infrastructure, and subsequent research activities, technology testing, and site operations. In addition to wind turbine test activities, NWTC may be used to support other NREL program activities and small-scale demonstration projects. This document assesses potential consequences to resources within the physical, biological, and human environment, including potential impacts to: air quality, geology and soils, water resources, biological resources, cultural and historic resources, socioeconomic resources, land use, visual resources, noise environment, hazardous materials and waste management, and health and safety conditions. Comment letters were received from several agencies in response to the scoping and predecisional draft reviews. The comments have been incorporated as appropriate into the document with full text of the letters contained in the Appendices. Additionally, information from the Rocky Flats Environmental Technology Site on going sitewide assessment of potential environmental impacts has been reviewed and discussed by representatives of both parties and incorporated into the document as appropriate.

  4. An assessment of acid rock drainage continuous monitoring technology

    Science.gov (United States)

    Fytas, K.; Hadjigeorgiou, J.

    1995-02-01

    In order to assess the magnitude and impact at affected mine sites of acid rock drainage (ARD), fixed-frequency sampling is often employed. This often involves manual sampling, at regular time intervals, of water and solids. It is felt that such sampling does not adequately describe the system evolution. Continuous monitoring offers a viable alternative in that it can better follow the seasonal fluctuations and high-frequency variations that characterize ARD. This paper evaluates existing continuous monitoring technology.

  5. Preliminary technology utilization assessment of the robotic fruit harvester

    Science.gov (United States)

    Wilhelm, J.

    1982-01-01

    The results of an analysis whose purpose was to examine the history and progress of mechanical fruit harvesting, to determine the significance of a robotic fruit tree harvester and to assess the available market for such a product are summarized. Background information that can be used in determining the benefit of a proof of principle demonstration is provided. Such a demonstration could be a major step toward the transfer of this NASA technology.

  6. Probabilistic accident consequence uncertainty analysis: Food chain uncertainty assessment. Volume 1: Main report

    Energy Technology Data Exchange (ETDEWEB)

    Brown, J. [National Radiological Protection Board (United Kingdom); Goossens, L.H.J.; Kraan, B.C.P. [Delft Univ. of Technology (Netherlands)] [and others

    1997-06-01

    This volume is the first of a two-volume document that summarizes a joint project conducted by the US Nuclear Regulatory Commission and the European Commission to assess uncertainties in the MACCS and COSYMA probabilistic accident consequence codes. These codes were developed primarily for estimating the risks presented by nuclear reactors based on postulated frequencies and magnitudes of potential accidents. This document reports on an ongoing project to assess uncertainty in the MACCS and COSYMA calculations for the offsite consequences of radionuclide releases by hypothetical nuclear power plant accidents. A panel of sixteen experts was formed to compile credible and traceable uncertainty distributions for food chain variables that affect calculations of offsite consequences. The expert judgment elicitation procedure and its outcomes are described in these volumes. Other panels were formed to consider uncertainty in other aspects of the codes. Their results are described in companion reports. Volume 1 contains background information and a complete description of the joint consequence uncertainty study. Volume 2 contains appendices that include (1) a summary of the MACCS and COSYMA consequence codes, (2) the elicitation questionnaires and case structures for both panels, (3) the rationales and results for the panels on soil and plant transfer and animal transfer, (4) short biographies of the experts, and (5) the aggregated results of their responses.

  7. Zero-emission vehicle technology assessment. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Woods, T.

    1995-08-01

    This is the final report in the Zero-Emission Vehicle (ZEV) Technology Assessment, performed for NYSERDA by Booz-Allen & Hamilton Inc. Booz-Allen wrote the final report, and performed the following tasks as part of the assessment: assembled a database of key ZEV organizations, their products or services, and plans; described the current state of ZEV technologies; identified barriers to widespread ZEV deployment and projected future ZEV technical capabilities; and estimated the cost of ZEVs from 1998 to 2004. Data for the ZEV Technology Assessment were obtained from several sources, including the following: existing ZEV industry publications and Booz-Allen files; major automotive original equipment manufacturers; independent electric vehicle manufacturers; battery developers and manufacturers; infrastructure and component developers and manufacturers; the U.S. Department of Energy, the California Air Resources Board, and other concerned government agencies; trade associations such as the Electric Power Research Institute and the Electric Transportation Coalition; and public and private consortia. These sources were contacted by phone, mail, or in person. Some site visits of manufacturers also were conducted. Where possible, raw data were analyzed by Booz-Allen staff and/or verified by independent sources. Performance data from standardized test cycles were used as much as possible.

  8. Assessing effects of technology usage on mathematics learning

    Science.gov (United States)

    Lynch, Julianne

    2006-12-01

    Computer-based technologies are now commonplace in classrooms, and the integration of these media into the teaching and learning of mathematics is supported by government policy in most developed countries. However, many questions about the impact of computer-based technologies on classroom mathematics learning remain unanswered, and debates about when and how they ought to be used continue. An increasing number of studies seek to identify the effects of technology usage on classroom learning, and at a time when governments are calling for `evidence-based' policy development, many studies applying quasi-scientific methodologies to this field of practice are emerging. By analysing a series of conceptual frameworks for assessing the use of computer-based technologies to support school learning, this article emphasises the value of research into the relationship between technical and conceptual aspects of technology use in mathematics education and beyond, and challenges the usefulness of large-scale, quasi-scientific studies that focus on educational inputs and outputs.

  9. An assessment of desiccant cooling and dehumidification technology

    Energy Technology Data Exchange (ETDEWEB)

    Mei, V.C.; Chen, F.C. (Oak Ridge National Lab., TN (United States)); Lavan, Z. (Illinois Inst. of Tech., Chicago, IL (United States)); Collier, R.K. Jr. (Collier Engineering Services, Merritt Island, FL (United States)); Meckler, G. (Gershon Meckler Associates, P.C., Herndon, VA (United States))

    1992-07-01

    Desiccant systems are heat-actuated cooling and dehumidification technology. With the recent advances in this technology, desiccant systems can now achieve a primary energy coefficient of performance (COP) between 1.3 and 1.5, with potential to go to 1.7 and higher. It is becoming one of the most promising alternatives to conventional cooling systems. Two important and well-known advantages of desiccant cooling systems are that they are CFC free and they can reduce the electricity peak load. Another important but lesser-known advantage of desiccant technology is its potential for energy conservation. The energy impact study in this report indicated that a possible 13% energy saving in residential cooling and 8% in commercial cooling is possible. Great energy saving potential also exists in the industrial sector if industrial waste heat can be used for desiccant regeneration. The latest study on desiccant-integrated building heating, ventilating, and air conditioning (HVAC) systems indicated that the initial cost for the conventional cooling equipment was greatly reduced by using desiccant technology because of downsized compressors, fans, and ductworks. This cost reduction was more than enough to offset the cost of desiccant equipment. Besides, the system operation cost was also reduced. All these indicate that desiccant systems are also cost effective. This study provides an updated state-of-the-art assessment forsiccant technology in the field of desiccant materials, systems, computer models, and theoretical analyses. From this information the technology options were derived and the future research and development needs were identified. Because desiccant technology has already been applied in the commercial building sector with very encouraging results, it is expected that future market breakthroughs will probably start in this sector. A market analysis for the commercial building application is therefore included.

  10. Comparison between CT volume measurement and histopathological assessment of response to neoadjuvant therapy in rectal cancer

    Energy Technology Data Exchange (ETDEWEB)

    Pomerri, Fabio, E-mail: fabio.pomerri@unipd.it [Veneto Institute of Oncology IOV-IRCCS, via Gattamelata 64, 35128 Padua (Italy); Department of Medicine, University of Padua, via Giustiniani 2, 35128 Padua (Italy); Pucciarelli, Salvatore, E-mail: puc@unipd.it [Department of Oncological and Surgical Sciences, University of Padua, via Giustiniani 2, 35128 Padua (Italy); Gennaro, Gisella, E-mail: gisella.gennaro@pd.infn.it [Veneto Institute of Oncology IOV-IRCCS, via Gattamelata 64, 35128 Padua (Italy); Maretto, Isacco, E-mail: isac77@gmail.com [Veneto Institute of Oncology IOV-IRCCS, via Gattamelata 64, 35128 Padua (Italy); Nitti, Donato, E-mail: donato.nitti@unipd.it [Department of Oncological and Surgical Sciences, University of Padua, via Giustiniani 2, 35128 Padua (Italy); Muzzio, Pier Carlo, E-mail: pcmuzzio@unipd.it [Veneto Institute of Oncology IOV-IRCCS, via Gattamelata 64, 35128 Padua (Italy)

    2012-12-15

    Objectives: The aim of this study was to compare volume measurements on computed tomography (CT) images with histopathological assessments of chemoradiotherapy (CRT)-induced tumor regression in locally advanced rectal cancer (RC). Methods: In 25 patients (13 males, 12 females; median age, 63 years; age range, 44–79 years) with locally advanced RC treated with preoperative CRT and surgery, two radiologists measured tumor volume on CT images before and after CRT. CT-based tumor volumetry and the modified response evaluation criteria in solid tumors (mRECISTs) were compared with T and N downstaging after CRT, and with the tumor regression grade (TRG). Results: Tumor volumes were significantly smaller on CT images after CRT. The tumors regressed in 52% (13/25), 36% (9/25) and 40% (10/25) of patients, based on T downstaging, TRG and mRECIST findings, respectively. In terms of T downstaging, the pre- and post-CRT tumor volumes of responders and non-responders to the treatment differed statistically, while their tumor volume reduction rates and volume reductions according to the 65% mRECIST threshold did not. In terms of N downstaging and TRG, the differences between the responders’ and the non-responders’ pre- and post-CRT tumor volumes, tumor volume reduction rates, and mRECIST thresholds were never statistically significant. Conclusion: Measuring tumor size on CT images is of limited value in predicting the histopathological response to preoperative CRT in RC patients, so it may be unwise to select surgical treatment strategies based on CT volumetry.

  11. QUALITY ASSESSMENT OF ETHICS ANALYSES FOR HEALTH TECHNOLOGY ASSSESSMENT.

    Science.gov (United States)

    Scott, Anna Mae; Bond, Kenneth; Gutiérrez-Ibarluzea, Iñaki; Hofmann, Björn; Sandman, Lars

    2016-01-01

    Although consideration of ethical issues is recognized as a crucial part of health technology assessment, ethics analysis for HTA is generally perceived as methodologically underdeveloped in comparison to other HTA domains. The aim of our study is (i) to verify existing tools for quality assessment of ethics analyses for HTA, (ii) to consider some arguments for and against the need for quality assessment tools for ethics analyses for HTA, and (iii) to propose a preliminary set of criteria that could be used for assessing the quality of ethics analyses for HTA. We systematically reviewed the literature, reviewed HTA organizations' Web sites, and solicited views from thirty-two experts in the field of ethics for HTA. The database and HTA agency Web site searches yielded 420 references (413 from databases, seven from HTA Web sites). No formal instruments for assessing the quality of ethics analyses for HTA purposes were identified. Thirty-two experts in the field of ethics for HTA from ten countries, who were brought together at two workshops held in Edmonton (Canada) and Cologne (Germany) confirmed the findings from the literature. Generating a quality assessment tool for ethics analyses in HTA would confer considerable benefits, including methodological alignment with other areas of HTA, increase in transparency and transferability of ethics analyses, and provision of common language between the various participants in the HTA process. We propose key characteristics of quality assessment tools for this purpose, which can be applied to ethics analyses for HTA purposes.

  12. Technology transfer for the US Department of Energy's Energy Storage Program: Volume 2, Appendices

    Energy Technology Data Exchange (ETDEWEB)

    Bruneau, C.L.; Fassbender, L.L.

    1988-10-01

    This document contains the appendices to Technology Transfer Recommendations for the US Department of Energy's Storage Program (PNL-6484, Vol. 1). These appendices are a list of projects, publications, and presentations connected with the Energy Storage (STOR) program. In Volume 1, the technology transfer activities of the STOR program are examined and mechanisms for increasing the effectiveness of those activities are recommended.

  13. Factors controlling volume errors through 2D gully erosion assessment: guidelines for optimal survey design

    Science.gov (United States)

    Castillo, Carlos; Pérez, Rafael

    2017-04-01

    The assessment of gully erosion volumes is essential for the quantification of soil losses derived from this relevant degradation process. Traditionally, 2D and 3D approaches has been applied for this purpose (Casalí et al., 2006). Although innovative 3D approaches have recently been proposed for gully volume quantification, a renewed interest can be found in literature regarding the useful information that cross-section analysis still provides in gully erosion research. Moreover, the application of methods based on 2D approaches can be the most cost-effective approach in many situations such as preliminary studies with low accuracy requirements or surveys under time or budget constraints. The main aim of this work is to examine the key factors controlling volume error variability in 2D gully assessment by means of a stochastic experiment involving a Monte Carlo analysis over synthetic gully profiles in order to 1) contribute to a better understanding of the drivers and magnitude of gully erosion 2D-surveys uncertainty and 2) provide guidelines for optimal survey designs. Owing to the stochastic properties of error generation in 2D volume assessment, a statistical approach was followed to generate a large and significant set of gully reach configurations to evaluate quantitatively the influence of the main factors controlling the uncertainty of the volume assessment. For this purpose, a simulation algorithm in Matlab® code was written, involving the following stages: - Generation of synthetic gully area profiles with different degrees of complexity (characterized by the cross-section variability) - Simulation of field measurements characterised by a survey intensity and the precision of the measurement method - Quantification of the volume error uncertainty as a function of the key factors In this communication we will present the relationships between volume error and the studied factors and propose guidelines for 2D field surveys based on the minimal survey

  14. Horizontal oil well applications and oil recovery assessment. Volume 2: Applications overview, Final report

    Energy Technology Data Exchange (ETDEWEB)

    Deskins, W.G.; McDonald, W.J.; Knoll, R.G.; Springer, S.J.

    1995-03-01

    Horizontal technology has been applied in over 110 formations in the USA. Volume 1 of this study addresses the overall success of horizontal technology, especially in less-publicized formations, i.e., other than the Austin Chalk, Bakken, and Niobrara. Operators in the USA and Canada were surveyed on a formation-by-formation basis by means of a questionnaire. Response data were received describing horizontal well projects in 58 formations in the USA and 88 in Canada. Operators` responses were analyzed for trends in technical and economic success based on lithology (clastics and carbonates) and resource type (light oil, heavy oil, and gas). The potential impact of horizontal technology on reserves was also estimated. A forecast of horizontal drilling activity over the next decade was developed.

  15. A consumer involvement model for health technology assessment in Canada.

    Science.gov (United States)

    Pivik, Jayne; Rode, Elisabeth; Ward, Christopher

    2004-08-01

    Similar to other health policy initiatives, there is a growing movement to involve consumers in decisions affecting their treatment options. Access to treatments can be impacted by decisions made during a health technology assessment (HTA), i.e., the rigorous assessment of medical interventions such as drugs, vaccines, devices, materials, medical and surgical procedures and systems. The purpose of this paper was to empirically assess the interest and potential mechanisms for consumer involvement in HTA by identifying what health consumer organizations consider meaningful involvement, examining current practices internationally and developing a model for involvement based on identified priorities and needs. Canadian health consumer groups representing the largest disease or illness conditions reported a desire for involvement in HTA and provided feedback on mechanisms for facilitating their involvement.

  16. The politics of health technology assessment in Poland.

    Science.gov (United States)

    Ozieranski, Piotr; McKee, Martin; King, Lawrence

    2012-12-01

    First, to identify risks associated with the scientific evaluation of drugs considered for state reimbursement in Poland through exploring strategies of influence employed by multinational drug companies in relation to the Agency for Health Technology Assessment (AHTAPol). Second, to ascertain whether the outcomes of drug evaluation meet the interests of the public payer in reimbursing cost-effective drugs supported by robust pharmacoeconomic evidence. We conducted 109 in-depth semi-structured interviews with a purposive sample of stakeholders involved in the reimbursement process in Poland. We analysed four available documentary sources, including recommendations issued by the AHTAPol. AHTAPol recommendations were an instrumental part of the blame avoidance strategy by political elites. Drug producers utilised direct and indirect strategies of influence. The direct strategies involved building relationships with a circle of health technology assessment analysts and medical experts working for the Agency. The indirect strategies employed leaders of opinion in the medical milieu, patient organisations, and political elites to endorse policy positions favourable to drug companies. The AHTAPol positively recommended an increasing proportion of the drugs it assessed, many of them reported as not cost-effective or supported by dubious pharmacoeconomic evidence. The strategies of influence entail a number of risks that may undermine the scientific evaluation of drugs. Some outcomes of drug evaluation may favour the interests of multinational drug companies over those of the public payer. We suggest that the risks involved in drug evaluation might be mitigated through (1) professionalization of health technology assessment; (2) restriction of job seeking and post public-payer employment; (3) disclosure and management of experts' conflicts of interest; (4) institutionalisation of patient and public involvement; and (5) increased institutional separation of the AHTAPol from

  17. Connected Classroom Technology Facilitates Multiple Components of Formative Assessment Practice

    Science.gov (United States)

    Shirley, Melissa L.; Irving, Karen E.

    2015-02-01

    Formative assessment has been demonstrated to result in increased student achievement across a variety of educational contexts. When using formative assessment strategies, teachers engage students in instructional tasks that allow the teacher to uncover levels of student understanding so that the teacher may change instruction accordingly. Tools that support the implementation of formative assessment strategies are therefore likely to enhance student achievement. Connected classroom technologies (CCTs) include a family of devices that show promise in facilitating formative assessment. By promoting the use of interactive student tasks and providing both teachers and students with rapid and accurate data on student learning, CCT can provide teachers with necessary evidence for making instructional decisions about subsequent lessons. In this study, the experiences of four middle and high school science teachers in their first year of implementing the TI-Navigator™ system, a specific type of CCT, are used to characterize the ways in which CCT supports the goals of effective formative assessment. We present excerpts of participant interviews to demonstrate the alignment of CCT with several main phases of the formative assessment process. CCT was found to support implementation of a variety of instructional tasks that generate evidence of student learning for the teacher. The rapid aggregation and display of student learning evidence provided teachers with robust data on which to base subsequent instructional decisions.

  18. Expanding Health Technology Assessments to Include Effects on the Environment.

    Science.gov (United States)

    Marsh, Kevin; Ganz, Michael L; Hsu, John; Strandberg-Larsen, Martin; Gonzalez, Raquel Palomino; Lund, Niels

    2016-01-01

    There is growing awareness of the impact of human activity on the climate and the need to stem this impact. Public health care decision makers from Sweden and the United Kingdom have started examining environmental impacts when assessing new technologies. This article considers the case for incorporating environmental impacts into the health technology assessment (HTA) process and discusses the associated challenges. Two arguments favor incorporating environmental impacts into HTA: 1) environmental changes could directly affect people's health and 2) policy decision makers have broad mandates and objectives extending beyond health care. Two types of challenges hinder this process. First, the nascent evidence base is insufficient to support the accurate comparison of technologies' environmental impacts. Second, cost-utility analysis, which is favored by many HTA agencies, could capture some of the value of environmental impacts, especially those generating health impacts, but might not be suitable for addressing broader concerns. Both cost-benefit and multicriteria decision analyses are potential methods for evaluating health and environmental outcomes, but are less familiar to health care decision makers. Health care is an important and sizable sector of the economy that could warrant closer policy attention to its impact on the environment. Considerable work is needed to track decision makers' demands, augment the environmental evidence base, and develop robust methods for capturing and incorporating environmental data as part of HTA.

  19. Life cycle assessment of products and technologies. LCA Symposium

    Energy Technology Data Exchange (ETDEWEB)

    Koukkari, H.; Nors, M. (eds.)

    2009-12-15

    VTT Technical Research Centre of Finland organised a Symposium 'Life Cycle Assessment of Products and Technologies' on the 6th of October, 2009. The Symposium gave a good overview of methods, tools and applications of Life Cycle Assessment developed and utilised in several technology fields of VTT. The 12 Symposium papers deal with recent LCA studies on products and technologies. The scope ranges from beverage cups to urban planning, from inventory databases to rating systems. Topical issues relating to climate change concern biorefineries and the overall impacts of the utilisation of biomass. The calculation of carbon footprints is also introduced through paper products and magazines. One example of LCA tools developed at VTT addresses cement manufacturing. VTT's transport emission database, LIPASTO, was introduced in detail. The use of LCA methods and life cycle thinking is described in various contexts: product development in relation to precision instruments; selection of materials and work processes in relation to sediment remediation project; and procedures of sustainability rating through VTT's office building Digitalo. The Climate Bonus project presented a demonstrated ICT support that informs about the greenhouse gas emissions and carbon footprints of households. (orig.)

  20. Gender in health technology assessment: pilot study on agency approaches.

    Science.gov (United States)

    Panteli, Dimitra; Zentner, Annette; Storz-Pfennig, Philipp; Busse, Reinhard

    2011-07-01

    Gender as a social construct is a recognized health determinant. Because best practice in reporting health technology assessment (HTA) clearly specifies the need to appraise a technology's social impact within the target population, the extent to which gender issues are taken into account in HTA production is of interest, not only in light of equitable practices but also for reasons of effectiveness. The aim of this study is to provide a first assessment of the degree of gender sensitivity shown by HTA agencies around the world today. The Web sites of sixty HTA agencies were analyzed. The consideration of gender aspects was specifically looked for in each agency's general mission statement, its priority setting process, and its methodological approach. Additionally, specific gender-oriented initiatives not belonging to any of the aforementioned categories were identified. Of the sixty agencies, less than half mention a commitment to addressing the social implication of health technologies. Only fifteen institutions make information on their priority setting principles available on their Web sites and gender was an issue in two of those cases. Data on methodology were obtainable online from 18 agencies, two of which mentioned gender issues explicitly. Finally, gender-oriented initiatives were identified by thirteen agencies. A gender-sensitive approach is apparently rarely adopted in current HTA production. Exceptional practices and relevant tools do exist and could serve as examples to be promoted by international collaborative networks.

  1. Development and Implementation of Health Technology Assessment: A Policy Study

    Directory of Open Access Journals (Sweden)

    P Abooee

    2013-01-01

    Full Text Available Background: To provide an overview of the development of health technology assessment (HTA in Iran since 2007, and to facilitate further development of HTA and its integration into policy making.Methods: Data of this study were collected through key documents (e.g. literature, laws, and other official documentation and analyzed by experts of opinion in form of qualitative methods.Results: Health technology assessment entered to the political agenda in Iran only in 2007 with a strong impetus of an evidence-based medicine movement with the bellow objectives: Institutionalization of evidence-based decision making in Ministry of Health, Creating an localization for structural HTA in Health system of Iran, Setting up training courses in order to educate capable manpower to full up the capacity of the universities, Establishment of a new field in HTA subject in medical universities for MSc and PhD degree, International communication about HTA through national website and possible participation in international Congress.Conclusion: HTA has been established in the healthcare system of Iran but what is needed is a clear political will to push forward the objectives of HTA in Iran. Similar to other countries, advance the regulation on the adoption of new health technologies to improve not only technical or allocate efficiency, but also health equity.

  2. Environmental assessment of digestate treatment technologies using LCA methodology.

    Science.gov (United States)

    Vázquez-Rowe, Ian; Golkowska, Katarzyna; Lebuf, Viooltje; Vaneeckhaute, Céline; Michels, Evi; Meers, Erik; Benetto, Enrico; Koster, Daniel

    2015-09-01

    The production of biogas from energy crops, organic waste and manure has augmented considerably the amounts of digestate available in Flanders. This has pushed authorities to steadily introduce legislative changes to promote its use as a fertilising agent. There is limited arable land in Flanders, which entails that digestate has to compete with animal manure to be spread. This forces many anaerobic digestion plants to further treat digestate in such a way that it can either be exported or the nitrogen be removed. Nevertheless, the environmental impact of these treatment options is still widely unknown, as well as the influence of these impacts on the sustainability of Flemish anaerobic digestion plants in comparison to other regions where spreading of raw digestate is allowed. Despite important economic aspects that must be considered, the use of Life Cycle Assessment (LCA) is suggested in this study to identify the environmental impacts of spreading digestate directly as compared to four different treatment technologies. Results suggest relevant environmental gains when the digestate mix is treated using the examined conversion technologies prior to spreading, although important trade-offs between impact categories were observed and discussed. The promising results of digestate conversion technologies suggest that further LCA analyses should be performed to delve into, for instance, the appropriateness to shift to nutrient recovery technologies rather than digestate conversion treatments.

  3. Stochastic Technology Choice Model for Consequential Life Cycle Assessment.

    Science.gov (United States)

    Kätelhön, Arne; Bardow, André; Suh, Sangwon

    2016-12-06

    Discussions on Consequential Life Cycle Assessment (CLCA) have relied largely on partial or general equilibrium models. Such models are useful for integrating market effects into CLCA, but also have well-recognized limitations such as the poor granularity of the sectoral definition and the assumption of perfect oversight by all economic agents. Building on the Rectangular-Choice-of-Technology (RCOT) model, this study proposes a new modeling approach for CLCA, the Technology Choice Model (TCM). In this approach, the RCOT model is adapted for its use in CLCA and extended to incorporate parameter uncertainties and suboptimal decisions due to market imperfections and information asymmetry in a stochastic setting. In a case study on rice production, we demonstrate that the proposed approach allows modeling of complex production technology mixes and their expected environmental outcomes under uncertainty, at a high level of detail. Incorporating the effect of production constraints, uncertainty, and suboptimal decisions by economic agents significantly affects technology mixes and associated greenhouse gas (GHG) emissions of the system under study. The case study also shows the model's ability to determine both the average and marginal environmental impacts of a product in response to changes in the quantity of final demand.

  4. Information technologies for global resources management and environmental assessment

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, A.P.; Wang, Hua.

    1992-01-01

    Recent advances in computer and communications technologies offer unprecedented opportunities to develop sophisticated information resources management systems for global resources management and environment assessment in an efficient, effective, and systematic manner. In this paper, the emerging global energy and environmental issues are identified. Since satellite-based remote sensing systems are becoming increasingly available and produce massive data collections, the utilization of imaging processing techniques and their applications for regional and global resources management and environmental studies are described. Interoperability and interconnectivity among heterogeneous computer systems are major issues in designing a totally integrated, multimedia-based, information resources management system that operates in a networking environment. Discussions of the future technology trends are focused on a number of emerging information management technologies and communications standards which will aid in achieving seamless system integration and offer user-friendly operations. It can be foreseen that advances in computer and communications technologies, increasingly sophisticated image processing techniques and Geographical Information Systems (GIS), and the development of globally comprehensive data bases will bring global visualization'' onto multimedia desktop computers before the end of this decade.

  5. Information technologies for global resources management and environmental assessment

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, A.P.; Wang, Hua

    1992-09-01

    Recent advances in computer and communications technologies offer unprecedented opportunities to develop sophisticated information resources management systems for global resources management and environment assessment in an efficient, effective, and systematic manner. In this paper, the emerging global energy and environmental issues are identified. Since satellite-based remote sensing systems are becoming increasingly available and produce massive data collections, the utilization of imaging processing techniques and their applications for regional and global resources management and environmental studies are described. Interoperability and interconnectivity among heterogeneous computer systems are major issues in designing a totally integrated, multimedia-based, information resources management system that operates in a networking environment. Discussions of the future technology trends are focused on a number of emerging information management technologies and communications standards which will aid in achieving seamless system integration and offer user-friendly operations. It can be foreseen that advances in computer and communications technologies, increasingly sophisticated image processing techniques and Geographical Information Systems (GIS), and the development of globally comprehensive data bases will bring ``global visualization`` onto multimedia desktop computers before the end of this decade.

  6. Structured assessment approach version 1. License submittal document content and format for material control and accounting assessment. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    Parziale, A.A.; Sacks, I.J.

    1979-10-01

    A methodology, the Structured Assessment Approach, has been developed for the assessment of the effectiveness of material control and accounting (MC and A) safeguards systems at nuclear fuel cycle facilities. This methodology has been refined into a computational tool, the SAA Version 1 computational package, that was used first to analyze a hypothetical fuel cycle facility and used more recently to assess operational nuclear plants. The Version 1 analysis package is designed to analyze safeguards systems that prevent the diversion of special nuclear material (SNM) from nuclear fuel cycle facilities and to provide assurance that diversion has not occurred. This report is the second volume, the License Submittal Document Content and Format for Material Control and Accounting Assessment, of a four-volume document. It presents the content and format of the LSD necessary for Material Control and Accounting (MC and A) assessment with the SAA Version 1. The LSD is designed to provide the necessary data input to perform all four stages of analyses associated with the SAA. A full-size but Hypothetical Fuel Cycle Facility (HFCF) is used as an example to illustrate the required input data content and data format and to illustrate the procedure for generating the LSD. Generation of the LSD is the responsibility of the nuclear facility licensee applicant.

  7. DNAPLs at DOE sites: Background and assessment of characterization technologies

    Energy Technology Data Exchange (ETDEWEB)

    Junk, G.A.; Haas, W.J. Jr.

    1993-12-01

    The Characterization, Monitoring, and Sensor Technology Integrated Program (CMST-IP) within the Office of Technology Development (OTD) has responsibility for identification, evaluation, and delivery of technologies needed for the work of the Department of Energy`s Office of Environmental Restoration and Waste Management. This report addresses part of that responsibility by providing summary information on DNAPL site characterization. A dense nonaqueous phase liquid (DNAPL) is a source of contamination that can persist in the subsurface for decades before dissipating completely into the vapor phase and groundwater. The DNAPL chemicals of particular concern to the DOE are chlorinated volatile organic compounds (Cl VOCS) such as carbon tetrachloride (CCl{sub 4}), trichloroethylene (TCE), and perchloroethylene (PCE). These Cl VOCs were used in multiple ton quantities at DOE sites and were often released to the subsurface. The predicted fate of released Cl VOC liquid is downward movement through the soil under the force of gravity. As it moves, some of the Cl VOC liquid becomes trapped in the soil pores as residual saturation. The liquid also moves rapidly downward if small fractures are present. This migration continues until an impermeable or semi-permeable layer is encountered. Then lateral movement or spreading occurs. The downward and lateral migration in the subsurface leads to DNAPL pools, lenses, and residual saturation that can cause long-term contamination of groundwater at levels well above drinking water standards. Although Cl VOCs have been detected as dissolved components in the groundwater and as vapor in the soil gas at several DOE sites, direct evidence of their presence as DNAPL is sparse and no measurements of the amounts of DNAPL present within a given volume of subsurface have been made. Consequently, unresolved DNAPL issues exist at DOE sites.

  8. A Framework for Assessment of Aviation Safety Technology Portfolios

    Science.gov (United States)

    Jones, Sharon M.; Reveley, Mary S.

    2014-01-01

    The programs within NASA's Aeronautics Research Mission Directorate (ARMD) conduct research and development to improve the national air transportation system so that Americans can travel as safely as possible. NASA aviation safety systems analysis personnel support various levels of ARMD management in their fulfillment of system analysis and technology prioritization as defined in the agency's program and project requirements. This paper provides a framework for the assessment of aviation safety research and technology portfolios that includes metrics such as projected impact on current and future safety, technical development risk and implementation risk. The paper also contains methods for presenting portfolio analysis and aviation safety Bayesian Belief Network (BBN) output results to management using bubble charts and quantitative decision analysis techniques.

  9. Finding Qualitative Research Evidence for Health Technology Assessment.

    Science.gov (United States)

    DeJean, Deirdre; Giacomini, Mita; Simeonov, Dorina; Smith, Andrea

    2016-08-01

    Health technology assessment (HTA) agencies increasingly use reviews of qualitative research as evidence for evaluating social, experiential, and ethical aspects of health technologies. We systematically searched three bibliographic databases (MEDLINE, CINAHL, and Social Science Citation Index [SSCI]) using published search filters or "hedges" and our hybrid filter to identify qualitative research studies pertaining to chronic obstructive pulmonary disease and early breast cancer. The search filters were compared in terms of sensitivity, specificity, and precision. Our screening by title and abstract revealed that qualitative research constituted only slightly more than 1% of all published research on each health topic. The performance of the published search filters varied greatly across topics and databases. Compared with existing search filters, our hybrid filter demonstrated a consistently high sensitivity across databases and topics, and minimized the resource-intensive process of sifting through false positives. We identify opportunities for qualitative health researchers to improve the uptake of qualitative research into evidence-informed policy making.

  10. Health technology assessment in Australia: a role for clinical registries?

    Science.gov (United States)

    Scott, Anna Mae

    2016-03-31

    Objective Health technology assessment (HTA) is a process of assessing evidence to inform policy decisions about public subsidy of new drugs and medical procedures. Where evidence is uncertain but the technology itself is promising, funders may recommend funding on an interim basis. It is unknown whether evidence from clinical registries is used to resolve uncertainties identified in interim-funded decisions made by Australian HTA bodies. Therefore, the present study evaluated the role of evidence from clinical registries in resolving evidence uncertainties identified by the Medical Services Advisory Committee (MSAC).Methods All HTAs considered by MSAC between 1998 and 2015 were reviewed and assessments that recommended interim funding were identified. The MSAC website was searched to identify reassessments of these recommendations and sources of evidence used to resolve the uncertainties were identified.Results Of 173 HTA reports considered by MSAC, 17 (10%) contained an interim funding recommendation. Eight recommendations cited uncertainty around safety, 15 cited uncertainty around clinical effectiveness and 13 cited uncertainty around economics (cost-effectiveness and/or budget impact). Of the 17 interim funding recommendations, 11 (65%) have been reassessed. Only two reassessments relied on clinical registry evidence to resolve evidence gaps identified at the time of the interim funding recommendation.Conclusions Clinical registries are underused as a source of evidence for resolving uncertainties around promising new health technologies in Australia. An open dialogue between stakeholders on the role of registries in this context is needed.What is known about the topic? HTA is a process of assessing the evidence to inform policy decisions about public subsidy of new health technologies (e.g. pharmaceuticals, diagnostic tests, medical procedures). Where evidence is uncertain but the technology under evaluation is promising, funders may recommend the funding of

  11. High-Performance Home Technologies: Solar Thermal & Photovoltaic Systems; Volume 6 Building America Best Practices Series

    Energy Technology Data Exchange (ETDEWEB)

    None

    2007-06-01

    The sixth volume of the Building America Best Practices Series presents information that is useful throughout the U.S. for enhancing the energy efficiency practices in the specific climate zones that are presented in each of the volumes.

  12. Quality assurance and technology assessment: pieces of a larger puzzle.

    Science.gov (United States)

    McDonald, I G

    2000-01-01

    Increasing integration of health care and health services research has resulted in an overlap between disciplines involved in the evaluation of clinical practice. We have examined the relationships of quality assurance (QA), medical technology assessment (TA), clinical epidemiology (CE) and evidence-based medicine (EBM) from an historical perspective. Clinicians, patients and administrators need local information on effectiveness of routine care. Information from trials alone, efficacy data, will not suffice nor can it be culled from administrative databases designed for other purposes. The current activities of QA should be therefore be expanded to include the study of the effectiveness of interventions in terms of appropriateness of use, patient outcomes and study of the determinants of outcomes, as seen from the perspective of doctors, patients, administrators and policy makers, using data collected during the course of routine patient care. With the assistance of information technology, with methodological support and multidisciplinary cooperation, clinicians can do this as part of a more broadly defined clinical research. Quality assurance and TA both evolved with the objective of studying clinical care but have quite different historical roots, complementary perspectives and objectives, use different methods and involve a different set of practitioners. Quality assurance is a type of 'formative' evaluation conducted in the clinical setting using indicators as flags of process or outcome events of interest, simple surveys and audit studies. Its primary aim is to achieve incremental improvement rather than to simply pass judgement. An important underlying assumption is that health care behaves as a complex dynamic system. Technology assessment, a form of summative evaluation with an orientation towards policy, synthesises information from formal scientific studies of efficacy in the form of clinical trials and studies of cost-effectiveness. For the evaluation

  13. Patrick Air Force Base integrated resource assessment. Volume 2, Baseline detail

    Energy Technology Data Exchange (ETDEWEB)

    Wahlstrom, R.R.; King, D.A.; Parker, S.A.; Sandusky, W.F.

    1993-08-01

    The US Air Force has tasked the Pacific Northwest Laboratory (PNL), in support of the US Department of Energy (DOE) Federal Energy Management Program (FEMP), to assess energy use at Patrick Air Force Base (AFB). The information obtained from this assessment will be used in identifying energy resource opportunities to reduce overall energy consumption on the base. The primary focus of this report is to assess the current baseline energy consumption at Patrick AFB. It is a comparison report to Volume 1, the Executive Summary, and Volume 3, the Resource Assessment. This assessment requires that information be obtained and characterized for buildings, utilities, energy sources, energy uses, and load profile information to be used to improve the characterization of energy use on the base. The characteristics of electricity, natural gas, and No. 2 fuel oil are analyzed for on-base facilities and housing. The assessment examines basic regional information used to determine energy-use intensity (EUI) values for Patrick AFB facilities by building, fuel type, and energy end use. It also provides a summary of electricity consumption from Florida Power and Light Company (FPL) metered data for 1985-1991. Load profile information obtained from FPL data is presented for the north and south substations for the four seasons of the year, including weekdays and weekends.

  14. Comparison among methods for the assessment of deadwood volume in a former holm oak coppice

    Directory of Open Access Journals (Sweden)

    Bianchi L

    2013-04-01

    Full Text Available Comparison among methods for the assessment of deadwood volume in a former holm oak coppice. The paper aims to compare three methods for the assessment of deadwood volume, i.e., LIS (Line Intersect System, FAS (Fixed Area Sampling, and WM (Weighings Method. The control data are represented by the outputs of Xylometric measurement. The study was carried out in a former holm oak (Quercus ilex L. coppice located in the nature park of Montioni in southern Tuscany. LIS and FAS overestimated significantly the quantity of deadwood (+12% and +50%, respectively. The error become higher as the minimum threshold sampling increases. The WM, besides the operational complexity of its application, led to more promising and precise results.

  15. Historical development of health technology assessment in Thailand.

    Science.gov (United States)

    Teerawattananon, Yot; Tantivess, Sripen; Yothasamut, Jomkwan; Kingkaew, Pritaporn; Chaisiri, Kakanang

    2009-07-01

    This study aims to review the development of health technology assessment (HTA), including the socioeconomic context, outputs, and policy utilization in the Thai setting. This study was conducted through extensive document reviews including these published in both domestic and international literature. Evidence suggests that contextual elements of the health system, especially the country's economic status and health financing reforms, as well as their effects on government budgeting for medical and public health services, played an important role in the increasing needs and demands for HTA information among policy makers. In the midst of substantial economic growth during the years 1982 to 1996, several studies reported the rapid diffusion and poor distribution of health technologies, and inequitable access to high-cost technology in public and private hospitals. At the same time, economic analysis and its underpinning concept of efficiency were suggested by groups of scholars and health officials to guide national policy on the investment in health technology equipment. Related research and training programs were subsequently launched. However, none of these HTA units could be institutionalized into national bodies. From 1997 to 2005, an economic recession, followed by the introduction of a universal health coverage plan, triggered the demands for effective measures for cost containment and prioritization of health interventions. This made policy makers and researchers at the Ministry of Public Health (MOPH) pay increasing attention to economic appraisals, and several HTA programs were established in the Ministry. Despite the rising number of Thai health economic publications, a major problem at that period involved the poor quality of studies. Since 2006, economic recovery and demands from different interests to include expensive technologies in the public health benefit package have been crucial factors promoting the role of HTA in national policy decisions

  16. Technology assessment of applied techniques for exploitation of geothermal energy

    Energy Technology Data Exchange (ETDEWEB)

    1977-04-01

    Studies were made to elucidate the effects of technological development of natural steam and hot water on the general social and industrial environments. These were followed by studies of enhanced methods for the forecasting of these impacts. The studies included assessments of actual conditions and the preparation of regional models, ranging from rural to urban-fringe situations. The economic implications of geothermal development in various regional situations are discussed, and the models developed provide for the integration of new data and their extrapolation to as yet uncertain situations.

  17. Preliminary Assessment/Site Investigation: Tooele Army Depot, Utah. Volume 2. South Area

    Science.gov (United States)

    1988-12-29

    Classification) Preliminary Assessment/Site Investigation, Toefle Army Depot., Utah; Volume ’fl-South Area Q2 PERSONAL AUTHOR(S) Andris Lapins CPG, Li 3a...Regulations CERCLA Comprehensive Environmental Response, Compensation and Liability Act CES Civil Engineering Squadron CGW Chemistry Groundwater File CRL...area around s rEAD . 2-12 Low humidity is a characteristic of the valley climate and visibility is generally good. During winter months, however, storm

  18. Thinking Tools in Computer-Based Assessment: Technology Enhancements in Assessments for Learning

    Science.gov (United States)

    Rosen, Yigal

    2014-01-01

    One of the greatest concerns in schools today is how teachers can bring together assessment and learning in a way that is meaningful for students' thinking skills, while focusing on content standards. Better understanding of how different types of technology based thinking tools can be used for improving classroom teaching and learning,…

  19. Available technology for indirect conversion of coal to methanol and gasoline: a technology and economics assessment. [Technology assessment and comparative evaluation of available processes

    Energy Technology Data Exchange (ETDEWEB)

    Wham, R. M.; Forrester, III, R. C.

    1980-01-01

    The objective of the work was to review and assess the present state of the art of indirect liquid fuels synthesis, with particular emphasis to be placed upon those processes which produce methanol suitable for use as fuel. Following this review, four conceptual designs for indirect conversion of a Western subbituminous coal to methanol and gasoline were prepared. Capital and operating costs for each of the four cases were then estimated. This information was used to calculate the required product selling prices under a base case set of financial ground rules. Results of the methanol production technology assessment and economic assessments of four coal conversion plants are presented.

  20. Structured assessment approach: Version I. Applied demonstration of output results. Volume 3

    Energy Technology Data Exchange (ETDEWEB)

    Parziale, A.A.; Sacks, 1.J.

    1979-10-01

    A methodology, the Structured Assessment Approach, has been developed for the assessment of the effectiveness of material control and accounting (MC and A) safeguards systems at nuclear fuel cycle facilities. This methodology has been refined into a computational tool, the SAA Version 1 computational package, that was used first to analyze a hypothetical fuel cycle facility (HFCF) and used more recently to assess operational nuclear plants. The Version 1 analysis package is designed to analyze safeguards systems that prevent the diversion of special nuclear material (SNM) from nuclear fuel cycle facilities and to provide assurance that diversion has not occurred. This report is the third volume, Applied Demonstration of Output Results, of a four-volume document. It presents the outputs for each of the four levels of the SAA Version 1 computational package. Two types of outputs are discussed: detailed output findings and summary output tables. The summary output tables are used to aggregate the detailed output findings in a condensed form for NRC analyst consumption. Specific output results are presented for an HFCF, which is described in Volume II.

  1. Waiting for Disasters: A Risk Reduction Assessment of Technological Disasters

    Science.gov (United States)

    Rovins, Jane; Winningham, Sam

    2010-05-01

    This session provides a risk reduction/mitigation assessment of natural hazards causation of technological disasters and possible solution. People use technology in an attempt to not only control their environment but nature itself in order to make them feel safe and productive. Most strategies for managing hazards followed a traditional planning model i.e. study the problem, identify and implement a solution, and move on to the next problem. This approach is often viewed as static model and risk reduction is more of an upward, positive, linear trend. However, technological disasters do not allow risk reduction action to neatly fit this upward, positive, linear trend with actual or potential threats to the environment and society. There are different types of technological disasters, including industrial accidents; pipeline ruptures; accidents at power, water and heat supply systems and other lines of communication; sudden collapse of buildings and mines; air crashes; shipwrecks; automobile and railway accidents to name a few. Natural factors can play an essential role in triggering or magnifying technological disasters. They can result from the direct destruction of given technical objects by a hazardous natural process such as the destruction of an atomic power plant or chemical plant due to an earthquake. Other examples would include the destruction of communications or infrastructure systems by heavy snowfalls, strong winds, avalanches. Events in the past ten years clearly demonstrate that natural disasters and the technological disasters that accompany them are not problems that can be solved in isolation and risk reduction can play an important part. Risk reduction was designed to head off the continuing rising financial and structural tolls from disasters. All Hazard Risk Reduction planning was supposed to include not only natural, but technological, and human-made disasters as well. The subsequent disaster risk reduction (DRR) indicators were to provide the

  2. Offline Chinese handwriting recognition :an assessment of current technology

    Institute of Scientific and Technical Information of China (English)

    Sargur N.Srihari; Xuanshen Yang; Gregory R.Ball

    2007-01-01

    Offline Chinese handwriting recognition (OCHR)is a typically difficult pattern recognition problem.Many authors have presented various approaches to recognizing its different aspects.We present a survey and an assessment of relevant papers appearing in recent publications of relevant conferences and journals,including those appearing in ICDAR,SDIUT,IWFHR,ICPR,PAMI,PR,PRL,SPIE-DRR,and IJDAR.The methods are assessed in the sense that we document their technical approaches,strengths,and weaknesses,as well as the data sets on which they were reportedly tested and on which results were generated.We also identify a list of technology gaps with respect to Chinese handwriting recognition and identify technical approaches that show promise in these areas as well as identify the leading researchers for the applicable topics,discussing difficulties associated with any given approach.

  3. Health Technology Assessment of Magnetic Resonance Imaging in Shanxi Province

    Institute of Scientific and Technical Information of China (English)

    Yueze Liu; Jianwen Cao; Zuxun Lu

    2004-01-01

    Assess the current status of MRI in Shanxi province by health technology assessment method to provide suggestion and guidelines for future government decisions on the procurement and installation of new high-tech medical equipments. All of the 21 hospitals installed MRIs were surveyed.The results showed that 1 ) Diffusion of MRI is consistent with the economic development in different regional districts and hospital levels in Shanxi province. 2) There are better monetary returns of MRI in higher level hospitals than lower level hospitals. 3) Most MRIs in Shanxi province had been running at a loss, and the first class tertiary level hospitals had been making profit from providing MRI services to patients. 4) Better cost-benefit accorded with higher hospital level, more patients serviced etc. 5 ) The biggest investment risk is the initial purchase and installation of MRI. 6) Positive rates and veracity of MRI diagnosis were higher. 7) MRI is a safe equipment.

  4. Simulation Technology Laboratory Building 970 hazards assessment document

    Energy Technology Data Exchange (ETDEWEB)

    Wood, C.L.; Starr, M.D.

    1994-11-01

    The Department of Energy Order 5500.3A requires facility-specific hazards assessments be prepared, maintained, and used for emergency planning purposes. This hazards assessment document describes the chemical and radiological hazards associated with the Simulation Technology Laboratory, Building 970. The entire inventory was screened according to the potential airborne impact to onsite and offsite individuals. The air dispersion model, ALOHA, estimated pollutant concentrations downwind from the source of a release, taking into consideration the toxicological and physical characteristics of the release site, the atmospheric conditions, and the circumstances of the release. The greatest distances at which a postulated facility event will produce consequences exceeding the ERPG-2 and Early Severe Health Effects thresholds are 78 and 46 meters, respectively. The highest emergency classification is a Site Area Emergency. The Emergency Planning Zone is 100 meters.

  5. Radiation safety assessment and development of environmental radiation monitoring technology

    CERN Document Server

    Choi, B H; Kim, S G

    2002-01-01

    The Periodic Safety Review(PSR) of the existing nuclear power plants is required every ten years according to the recently revised atomic energy acts. The PSR of Kori unit 1 and Wolsong unit 1 that have been operating more than ten years is ongoing to comply the regulations. This research project started to develop the techniques necessary for the PSR. The project developed the following four techniques at the first stage for the environmental assessment of the existing plants. 1) Establishment of the assessment technology for contamination and accumulation trends of radionuclides, 2) alarm point setting of environmental radiation monitoring system, 3) Development of Radiation Safety Evaluation Factor for Korean NPP, and 4) the evaluation of radiation monitoring system performance and set-up of alarm/warn set point. A dynamic compartment model to derive a relationship between the release rates of gas phase radionuclides and the concentrations in the environmental samples. The model was validated by comparing ...

  6. A Research Needs Assessment for waste plastics recycling: Volume 1, Executive summary. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-01

    This first volume provides a summary of the entire project. The study utilized the talents of a large number of participants, including a significant number of peer reviewers from industrial companies, government agencies, and research institutes. in addition, an extensive analysis of relevant literature was carried out. In considering the attractiveness of recycling technologies that are alternatives to waste-to-energy combustion units, a systems approach was utilized. Collection of waste streams containing plastics, sortation, and reclamation of plastics and plastic mixtures, reprocessing or chemical conversion of the reclaimed polymers, and the applicability of the products to specific market segments have been analyzed in the study.

  7. Comparison between visual assessment of MTA and hippocampal volumes in an elderly, non-demented population

    Energy Technology Data Exchange (ETDEWEB)

    Cavallin, Lena; Axelsson, Rimma [CLINTEC, Div. of Medical Imaging and Technology, Karolinska Inst., Karolinska Univ. Hospital, Stockholm (Sweden); Dept. of Radiology, Karolinska Univ. Hospital, Stockholm (Sweden)], e-mail: lena.cavallin@karolinska.se; Bronge, Lena [CLINTEC, Div. of Medical Imaging and Technology, Karolinska Inst., Karolinska Univ. Hospital, Stockholm (Sweden); Aleris Diagnostics, Stockholm (Sweden); Zhang, Yi [NVS, Novum, Karolinska Inst., Karolinska Univ. Hospital, Stockholm (Sweden); Oeksengaard, Anne-Rita [NVS, Novum, Karolinska Inst., Karolinska Univ. Hospital, Stockholm (Sweden); Ulleval Univ. Hospital and Asker and Baerum Hospital, Oslo (Norway); Wahlund, Lars-Olof [NVS, Novum, Karolinska Inst., Karolinska Univ. Hospital, Stockholm (Sweden); Swedish Brain Power, Karolinska Univ. Hospital, Stockholm (Sweden); Fratiglioni, Laura [ARC Karolinska Inst. Stockholm (Sweden)

    2012-06-15

    Background: It is important to have a replicable easy method for monitoring atrophy progression in Alzheimer's disease. Volumetric methods for calculating hippocampal volume are time-consuming and commonly used in research. Visual assessments of medial temporal lobe atrophy (vaMTA) is a rapid method for clinical use. This method has not been tested in a large non-demented population in comparison with volumetry measurements. Since hippocampal volume decreases with time even in normal aging there is also a need to study the normal age differences of medial temporal lobe atrophy. Purpose: To compare visual assessment of medial temporal lobe atrophy (vaMTA) with hippocampal volume in a healthy, non-demented elderly population. To describe normal ageing using vaMTA. Material and Methods: Non-demented individuals aged 60, 66, 72, 78, 81, 84, and {>=}87 years old were recruited from the Swedish National study on Ageing and Care in Kungsholmen (SNAC-K), Sweden. Standard magnetic resonance imaging (MRI) scans, vaMTA, and calculations of hippocampal volumes were performed in 544 subjects. Results: Significant correlation (rs = -0.32, P < 0.001, sin; and rs = -0.26, P < 0.001, dx) was found between hippocampal volume measurements and vaMTA. In normal ageing, almost 95% of {<=}66-year-olds had a medial temporal lobe atrophy (MTA) score {<=}1, with possible scores ranging from 0 to 4. Subjects aged 72, 78, and 81 years scored {<=}2, while the two oldest age groups had scores {<=}3. Conclusion: There was a highly significant correlation between volumetric measurements of the hippocampus and MTA scoring. In normal ageing, there is increasing MTA score. For non-demented elderly individuals {<=}70 years, an MTA score of 0-1 may be considered normal, compared with MTA {<=}2 for 70-80-years and MTA 3 for >80-year-old individuals.

  8. Nuclear proliferation and civilian nuclear power: report of the Nonproliferation Alternative Systems Assessment Program. Volume VII. International perspectives

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-12-01

    The purpose of this volume is to assess the proliferation vulnerabilities of the present deployment of civilian nuclear-power systems within the current nonproliferation regime and, in light of their prospective deployment, to consider technical and institutional measures and alternatives which may contribute to an improved regime in which nuclear power could play a significant part. An assessment of these measures must include consideration of their nonproliferation effectiveness as well as their bearing upon energy security, and their operational, economic, and political implications. The nature of these considerations can provide some measure of their likely acceptability to various nations. While any final assessment of such measures and alternatives would have to examine the circumstances particular to each nation, it is hoped that the more generic assessments conducted here will be useful in suggesting guidelines for developing an improved nonproliferation regime which also helps to meet nuclear-energy needs. One chapter outlines the existing nonproliferation regime, including the Treaty for the Non-Proliferation of Nuclear Weapons (NPT), International Atomic Energy Agency (IAEA) safeguards, bilateral and multilateral requirements for agreements of cooperation and transfers of technology, and existing provisons for sanctions for violation of nonproliferation commitments. The chapter then proceeds to an assessment of various alternatives for providing assurance of fuel supply in light of this current regime. Another chapter examines a set of technical and institutional measures and alternatives for various components of once-through and closed fuel cycles. The components of the once-through fuel cycle assessed are enrichment services and spent-fuel management; the components of closed fuel cycles assessed are reprocessing and plutonium management and fast-breeder reactor (FBR) deployment.

  9. Assessing intravascular volume by difference in pulse pressure in pigs submitted to graded hemorrhage.

    Science.gov (United States)

    Pestel, Gunther J; Hiltebrand, Luzius B; Fukui, Kimiko; Cohen, Delphine; Hager, Helmut; Kurz, Andrea M

    2006-10-01

    We assessed changes in intravascular volume monitored by difference in pulse pressure (dPP%) after stepwise hemorrhage in an experimental pig model. Six pigs (23-25 kg) were anesthetized (isoflurane 1.5 vol%) and mechanically ventilated to keep end-tidal CO2 (etCO2) at 35 mmHg. A PA-catheter and an arterial catheter were placed via femoral access. During and after surgery, animals received lactated Ringer's solution as long as they were considered volume responders (dPP>13%). Then animals were allowed to stabilize from the induction of anesthesia and insertion of catheters for 30 min. After stabilization, baseline measurements were taken. Five percent of blood volume was withdrawn, followed by another 5%, and then in 10%-increments until death from exsanguination occurred. After withdrawal of 5% of blood volume, all pigs were considered volume responders (dPP>13%); dPP rose significantly from 6.1+/-3.3% to 19.4+/-4.2%. The regression analysis of stepwise hemorrhage revealed a linear relation between blood loss (hemorrhage in %) and dPP (y=0.99*x+14; R2=0.7764; P<.0001). In addition, dPP was the only parameter that changed significantly between baseline and a blood loss of 5% (P<0.01), whereas cardiac output, stroke volume, heart rate, MAP, central venous pressure, pulmonary artery occlusion pressure, and systemic vascular resistance, respectively, remained unchanged. We conclude that in an experimental hypovolemic pig model, dPP correlates well with blood loss.

  10. HYDRA-II: A hydrothermal analysis computer code: Volume 3, Verification/validation assessments

    Energy Technology Data Exchange (ETDEWEB)

    McCann, R.A.; Lowery, P.S.

    1987-10-01

    HYDRA-II is a hydrothermal computer code capable of three-dimensional analysis of coupled conduction, convection, and thermal radiation problems. This code is especially appropriate for simulating the steady-state performance of spent fuel storage systems. The code has been evaluated for this application for the US Department of Energy's Commercial Spent Fuel Management Program. HYDRA-II provides a finite difference solution in cartesian coordinates to the equations governing the conservation of mass, momentum, and energy. A cylindrical coordinate system may also be used to enclose the cartesian coordinate system. This exterior coordinate system is useful for modeling cylindrical cask bodies. The difference equations for conservation of momentum are enhanced by the incorporation of directional porosities and permeabilities that aid in modeling solid structures whose dimensions may be smaller than the computational mesh. The equation for conservation of energy permits modeling of orthotropic physical properties and film resistances. Several automated procedures are available to model radiation transfer within enclosures and from fuel rod to fuel rod. The documentation of HYDRA-II is presented in three separate volumes. Volume I - Equations and Numerics describes the basic differential equations, illustrates how the difference equations are formulated, and gives the solution procedures employed. Volume II - User's Manual contains code flow charts, discusses the code structure, provides detailed instructions for preparing an input file, and illustrates the operation of the code by means of a model problem. This volume, Volume III - Verification/Validation Assessments, provides a comparison between the analytical solution and the numerical simulation for problems with a known solution. This volume also documents comparisons between the results of simulations of single- and multiassembly storage systems and actual experimental data. 11 refs., 55 figs., 13 tabs.

  11. A scientific assessment of a new technology orbital telescope

    Science.gov (United States)

    1995-01-01

    As part of a program designed to test the Alpha chemical laser weapons system in space, the Ballistic Missile Defense Organization (BMDO) developed components of an agile, lightweight, 4-meter telescope, equipped with an advanced active-optics system. BMDO had proposed to make space available in the telescope's focal plane for instrumentation optimized for scientific applications in astrophysics and planetary astronomy for a potential flight mission. Such a flight mission could be undertaken if new or additional sponsorship can be found. Despite this uncertainty, BMDO requested assistance in defining the instrumentation and other design aspects necessary to enhance the scientific value of a pointing and tracking mission. In response to this request, the Space Studies Board established the Task Group on BMDO New Technology Orbital Observatory (TGBNTOO) and charged it to: (1) provide instrumentation, data management, and science-operations advice to BMDO to optimize the scientific value of a 4-meter mission; and (2) support a space studies board assessment of the relative scientific merit of the program. This report deals with the first of these tasks, assisting the Advanced Technology Demonstrator's (ATD's) program scientific potential. Given the potential scientific aspects of the 4-meter telescope, this project is referred to as the New Technology Orbital Telescope (NTOT), or as the ATD/NTOT, to emphasize its dual-use character. The task group's basic conclusion is that the ATD/NTOT mission does have the potential for contributing in a major way to astronomical goals.

  12. Why ethics should be part of health technology assessment.

    Science.gov (United States)

    Hofmann, Bjørn Morten

    2008-01-01

    From the heydays of HTA in the 1970s, it has been argued that ethics should be a part of HTA. Despite more than 30 years with repeated intentions, only few HTA reports include ethical analysis, and there is little agreement on methods for integrating ethics. This poses the question of why it is so important to integrate ethics in HTA? The article analyzes ten arguments for making ethics part of HTA. The validity of the arguments depend on what we mean by "integrating," "ethics," and "HTA." Some of the counterarguments explain why it has taken so long to integrate ethics in HTA and why there are so many ethical approaches. Nevertheless, some of the arguments for making ethics part of HTA appear to be compelling. Health care is a moral endeavor, and the vast potential of technology poses complex moral challenges. A thorough assessment of technology would include reflection on these moral aspects. Ethics provides such a moral reflection. Health technology is a way to improve the life of human individuals. This involves questions of what "the good life" is, and hence ethical issues. Trying to ignore such questions may inflict with the moral foundation of health care: to help people. Additionally, HTA is an evaluation, and as such also a reflection on values. Hence, there is a profound affinity between HTA and ethics. Accordingly, ethics cannot be "integrated" in HTA as ethics is already a constitutive part of HTA. However, ethics can be acknowledged and emphasized.

  13. Advanced power assessment for Czech lignite. Task 3.6, Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    Sondreal, E.A.; Mann, M.D.; Weber, G.W.; Young, B.C.

    1995-12-01

    The US has invested heavily in research, development, and demonstration of efficient and environmentally acceptable technologies for the use of coal. The US has the opportunity to use its leadership position to market a range of advanced coal-based technologies internationally. For example, coal mining output in the Czech Republic has been decreasing. This decrease in demand can be attributed mainly to the changing structure of the Czech economy and to environmental constraints. The continued production of energy from indigenous brown coals is a major concern for the Czech Republic. The strong desire to continue to use this resource is a challenge. The Energy and Environmental Research Center undertook two major efforts recently. One effort involved an assessment of opportunities for commercialization of US coal technologies in the Czech Republic. This report is the result of that effort. The technology assessment focused on the utilization of Czech brown coals. These coals are high in ash and sulfur, and the information presented in this report focuses on the utilization of these brown coals in an economically and environmentally friendly manner. Sections 3--5 present options for utilizing the as-mined coal, while Sections 6 and 7 present options for upgrading and generating alternative uses for the lignite. Contents include Czech Republic national energy perspectives; powering; emissions control; advanced power generation systems; assessment of lignite-upgrading technologies; and alternative markets for lignite.

  14. Environmental Hazards Assessment Program. Volume 4: Annual report, July 1, 1993--June 30, 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-09-01

    The Medical University of South Carolina`s (MUSC) vision is to become the premier national resource for medical information and for environmental/health risk assessment. A key component to the success of the many missions of the Environmental Hazards Assessment Program (EHAP) is timely access to large volumes of data. The significant growth in the number of environmental/health information systems that has occurred over the past few years has made data access challenging. This study documents the results of the needs assessment effort conducted to determine the information access and processing requirements of EHAP. The following topics are addressed in this report: immunological consequences of beryllium exposure; assessment of genetic risks to environmental diseases; low dose-rate radiation health effects; environmental risk perception in defined populations; information support and access systems; and environmental medicine and risk communication: curriculum and a professional support network-Department of Family Medicine.

  15. Community-based risk assessment of water contamination from high-volume horizontal hydraulic fracturing.

    Science.gov (United States)

    Penningroth, Stephen M; Yarrow, Matthew M; Figueroa, Abner X; Bowen, Rebecca J; Delgado, Soraya

    2013-01-01

    The risk of contaminating surface and groundwater as a result of shale gas extraction using high-volume horizontal hydraulic fracturing (fracking) has not been assessed using conventional risk assessment methodologies. Baseline (pre-fracking) data on relevant water quality indicators, needed for meaningful risk assessment, are largely lacking. To fill this gap, the nonprofit Community Science Institute (CSI) partners with community volunteers who perform regular sampling of more than 50 streams in the Marcellus and Utica Shale regions of upstate New York; samples are analyzed for parameters associated with HVHHF. Similar baseline data on regional groundwater comes from CSI's testing of private drinking water wells. Analytic results for groundwater (with permission) and surface water are made publicly available in an interactive, searchable database. Baseline concentrations of potential contaminants from shale gas operations are found to be low, suggesting that early community-based monitoring is an effective foundation for assessing later contamination due to fracking.

  16. Technology-Enhanced Formative Assessment: A Research-Based Pedagogy for Teaching Science with Classroom Response Technology

    Science.gov (United States)

    Beatty, Ian D.; Gerace, William J.

    2009-01-01

    "Classroom response systems" (CRSs) are a promising instructional technology, but most literature on CRS use fails to distinguish between technology and pedagogy, to define and justify a pedagogical perspective, or to discriminate between pedagogies. "Technology-enhanced formative assessment" (TEFA) is our pedagogy for CRS-based science…

  17. Evaluation of Policy and Research Interventions in Science and Technology: Consequence Assessment of Regulatory and Technology Transfer Programs

    Science.gov (United States)

    Dias, Mary Beatrice

    2011-01-01

    This research contributes to efforts in assessment studies related to science and technology interventions. The work presented in this thesis focuses on understanding the effects of policies that influence science and technology interventions, and determining the impact of science and technology interventions themselves. Chapter 1 explores how…

  18. Assessing the optimal liquid volume to be sprayed on isolated olive trees according to their canopy volumes.

    Science.gov (United States)

    Miranda-Fuentes, A; Llorens, J; Rodríguez-Lizana, A; Cuenca, A; Gil, E; Blanco-Roldán, G L; Gil-Ribes, J A

    2016-10-15

    The application of pesticides to traditional and intensive olive orchards in Southern Spain has led to environmental problems. More specifically, the lack of an accurate, useful criterion to regulate the spray volume in relation to canopy characteristics has led to spray drift and runoff, which are threats to local ecosystems. The aim of this study was to determine the optimal relationship between canopy volume and the spray application volume, called specific spray volume, CV, through laboratory and field trials. In the laboratory trial, 6 specific spray volumes (0.05, 0.08, 0.10, 0.12, 0.15, and 0.20Lm(-3)) were tested in a specially designed structure containing small, live olive trees in order to simulate an intensive plantation system. The model aimed to evaluate the coverage of pesticide application on water sensitive paper (WSP) collectors. In the field trial, the three laboratory specific spray volumes that gave the best coverage values were tested on live, intensively managed trees, whose crown volume was manually measured. Food dye E-102 was used to determine the spray deposition on artificial targets (10×10cm absorbent paper pieces), and WSP was used to evaluate spray coverage. The spray penetration and deposit homogeneity inside the canopy were also evaluated. Weather conditions during the field trial were monitored with a weather station. The results of the laboratory trial showed that the three best specific spray volumes were 0.08, 0.10, and 0.12Lm(-3), resulting in mean coverage values of approximately 30%. The ANOVA of the field trial results showed that the 0.12Lm(-3) was the optimal specific spray volume for isolated olive trees. This specific spray volume gave the highest mean deposits, the best efficiency (as measured by the greatest normalized deposit), the most favourable penetration and homogeneity, and the highest coverage values.

  19. A short history of health technology assessment in Germany.

    Science.gov (United States)

    Perleth, Matthias; Gibis, Bernhard; Göhlen, Britta

    2009-07-01

    To provide an overview of the development of health technology assessment (HTA) in Germany since the 1990s. Analysis of key documents (e.g. literature, laws, and other official documentation) and personal experiences. Health technology assessment (HTA) entered the political agenda in Germany only in the mid-1990s, basically as the result of a top-down approach toward more efficiency in health care, but with a strong impetus of an evidence-based medicine movement. Accordingly, HTA became part of several healthcare reform laws since 1997, which led to the establishment of the Federal Joint Committee (G-BA) and the Institute for Quality and Efficiency in Health Care (IQWiG) in 2004. This tandem construction aims at using evidence in decision-making processes for coverage and other decisions. These developments have led to a considerable impact of HTA in Germany. In addition, a broad spectrum of activities at universities and in other organizations, such as the German Institute for Medical Documentation and Information (DIMDI), can be observed that contribute to both teaching and research in HTA. German researchers in the field of HTA are actively involved in international projects, such as EUNetHTA, and contribute to scientific conferences and journals.

  20. Meat Quality Assessment by Electronic Nose (Machine Olfaction Technology

    Directory of Open Access Journals (Sweden)

    Sundar Balasubramanian

    2009-07-01

    Full Text Available Over the last twenty years, newly developed chemical sensor systems (so called “electronic noses” have made odor analyses possible. These systems involve various types of electronic chemical gas sensors with partial specificity, as well as suitable statistical methods enabling the recognition of complex odors. As commercial instruments have become available, a substantial increase in research into the application of electronic noses in the evaluation of volatile compounds in food, cosmetic and other items of everyday life is observed. At present, the commercial gas sensor technologies comprise metal oxide semiconductors, metal oxide semiconductor field effect transistors, organic conducting polymers, and piezoelectric crystal sensors. Further sensors based on fibreoptic, electrochemical and bi-metal principles are still in the developmental stage. Statistical analysis techniques range from simple graphical evaluation to multivariate analysis such as artificial neural network and radial basis function. The introduction of electronic noses into the area of food is envisaged for quality control, process monitoring, freshness evaluation, shelf-life investigation and authenticity assessment. Considerable work has already been carried out on meat, grains, coffee, mushrooms, cheese, sugar, fish, beer and other beverages, as well as on the odor quality evaluation of food packaging material. This paper describes the applications of these systems for meat quality assessment, where fast detection methods are essential for appropriate product management. The results suggest the possibility of using this new technology in meat handling.

  1. Differences among formulary submission guidelines: implications for health technology assessment.

    Science.gov (United States)

    Mauskopf, Josephine; Walter, Jeffrey; Birt, Julie; Bowman, Lee; Copley-Merriman, Catherine; Drummond, Michael

    2011-07-01

    This article provides a detailed understanding of the differences in selected formulary submission guidelines supplied by various health technology assessment (HTA) agencies and indicates how these differences can impact the evidence base used to populate the HTA. Detailed summaries of the recommended methods for evidence generation, organized by topic areas relevant for clinical and economic data, for twelve countries in Europe, North America, and Australia where HTA processes are well developed were prepared. Using these summaries, we provide examples of the likely impact these differences in recommended methods could have on the evidence base used to evaluate new health technologies. Areas where recommendations differed included methodologies for systematic literature reviews (e.g., preferred databases and study designs for inclusion); selection of appropriate comparators; guidance on critical appraisal and synthesis of clinical evidence; appropriate sources for health value measures, resource use, and cost data; and approaches to uncertainty analyses. Performing literature searches that capture all relevant studies and then creating subsets of the literature based on a listing of country-specific requirements could allow for direct comparison of the evidence bases associated with the different guidelines. If the formulary submission guidelines were followed as written, different (although overlapping) bodies of evidence likely would be generated for each country, which could contribute to disparate assessments and recommendations. This comparison of the formulary submission guidelines could contribute to an understanding of why clinical and reimbursement decisions vary across countries.

  2. Industrial applications study. Volume III. Technology data base evaluation of waste recovery systems. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Harry L.; Hamel, Bernard B.; Karamchetty, Som; Steigelmann, William H.; Gajanana, Birur C.; Agarwal, Anil P.; Klock, Lawrence W.; Henderson, James M.; Calobrisi, Gary; Hedman, Bruce A.; Koluch, Michael; Biancardi, Frank; Bass, Robert; Landerman, Abraham; Peters, George; Limaye, Dilip; Price, Jeffrey; Farr, Janet

    1977-01-01

    An analytical study was undertaken to estimate the present and potential technical and economic characteristics of a wide range of components and complete systems capable of converting industrial and commercial waste heat into mechanical or electrical power and/or building and process heating and cooling. The component and system technologies evaluated include: Rankine-, Stirling-, and Brayton-cycle power systems; reciprocating-, rotary-, and turbo-expanders; heat exchangers and heat pumps; thermally driven cooling and dehumidification systems; and integrated systems capable of providing multiple outputs. Extensive analyses were conducted of Rankine-cycle systems using steam, halogenated hydrocarbons, and other organic compounds as working fluids. Performance characteristics, recoverable output power, and installed costs were estimated and are presented herein for Rankine-cycle systems utilizing selected working fluids over a range of waste heat source temperatures between approximately 200 and 1000/sup 0/F. Data describing the performance capabilities, technology and installed costs of heat exchangers, expanders and thermally driven absorption, vapor compression, steam-jet cooling and refrigeration systems are presented herein together with limited performance and cost estimates for Stirling-cycle power recovery systems. The component and system data were used to provide a preliminary assessment of the recoverable energy and associated system costs when integrated with generalized waste heat sources identified by Drexel University from their two-digit SIC industrial energy survey.

  3. A Comparative Study on Emerging Electric Vehicle Technology Assessments

    Energy Technology Data Exchange (ETDEWEB)

    Ford, Jonathan [Sentech, Inc.; Khowailed, Gannate [Sentech, Inc.; Blackburn, Julia [Sentech, Inc.; Sikes, Karen [Sentech, Inc.

    2011-03-01

    Numerous organizations have published reports in recent years that investigate the ever changing world of electric vehicle (EV) technologies and their potential effects on society. Specifically, projections have been made on greenhouse gas (GHG) emissions associated with these vehicles and how they compare to conventional vehicles or hybrid electric vehicles (HEVs). Similar projections have been made on the volumes of oil that these vehicles can displace by consuming large amounts of grid electricity instead of petroleum-based fuels. Finally, the projected rate that these new vehicle fleets will enter the market varies significantly among organizations. New ideas, technologies, and possibilities are introduced often, and projected values are likely to be refined as industry announcements continue to be made. As a result, over time, a multitude of projections for GHG emissions, oil displacement, and market penetration associated with various EV technologies has resulted in a wide range of possible future outcomes. This leaves the reader with two key questions: (1) Why does such a collective range in projected values exist in these reports? (2) What assumptions have the greatest impact on the outcomes presented in these reports? Since it is impractical for an average reader to review and interpret all the various vehicle technology reports published to date, Sentech Inc. and the Oak Ridge National Laboratory have conducted a comparative study to make these interpretations. The primary objective of this comparative study is to present a snapshot of all major projections made on GHG emissions, oil displacement, or market penetration rates of EV technologies. From the extensive data found in relevant publications, the key assumptions that drive each report's analysis are identified and 'apples-to-apples' comparisons between all major report conclusions are attempted. The general approach that was taken in this comparative study is comprised of six primary

  4. A Comparative Study on Emerging Electric Vehicle Technology Assessments

    Energy Technology Data Exchange (ETDEWEB)

    Ford, Jonathan [Sentech, Inc.; Khowailed, Gannate [Sentech, Inc.; Blackburn, Julia [Sentech, Inc.; Sikes, Karen [Sentech, Inc.

    2011-03-01

    Numerous organizations have published reports in recent years that investigate the ever changing world of electric vehicle (EV) technologies and their potential effects on society. Specifically, projections have been made on greenhouse gas (GHG) emissions associated with these vehicles and how they compare to conventional vehicles or hybrid electric vehicles (HEVs). Similar projections have been made on the volumes of oil that these vehicles can displace by consuming large amounts of grid electricity instead of petroleum-based fuels. Finally, the projected rate that these new vehicle fleets will enter the market varies significantly among organizations. New ideas, technologies, and possibilities are introduced often, and projected values are likely to be refined as industry announcements continue to be made. As a result, over time, a multitude of projections for GHG emissions, oil displacement, and market penetration associated with various EV technologies has resulted in a wide range of possible future outcomes. This leaves the reader with two key questions: (1) Why does such a collective range in projected values exist in these reports? (2) What assumptions have the greatest impact on the outcomes presented in these reports? Since it is impractical for an average reader to review and interpret all the various vehicle technology reports published to date, Sentech Inc. and the Oak Ridge National Laboratory have conducted a comparative study to make these interpretations. The primary objective of this comparative study is to present a snapshot of all major projections made on GHG emissions, oil displacement, or market penetration rates of EV technologies. From the extensive data found in relevant publications, the key assumptions that drive each report's analysis are identified and 'apples-to-apples' comparisons between all major report conclusions are attempted. The general approach that was taken in this comparative study is comprised of six primary

  5. Euler Technology Assessment program for preliminary aircraft design employing SPLITFLOW code with Cartesian unstructured grid method

    Science.gov (United States)

    Finley, Dennis B.

    1995-01-01

    This report documents results from the Euler Technology Assessment program. The objective was to evaluate the efficacy of Euler computational fluid dynamics (CFD) codes for use in preliminary aircraft design. Both the accuracy of the predictions and the rapidity of calculations were to be assessed. This portion of the study was conducted by Lockheed Fort Worth Company, using a recently developed in-house Cartesian-grid code called SPLITFLOW. The Cartesian grid technique offers several advantages for this study, including ease of volume grid generation and reduced number of cells compared to other grid schemes. SPLITFLOW also includes grid adaptation of the volume grid during the solution convergence to resolve high-gradient flow regions. This proved beneficial in resolving the large vortical structures in the flow for several configurations examined in the present study. The SPLITFLOW code predictions of the configuration forces and moments are shown to be adequate for preliminary design analysis, including predictions of sideslip effects and the effects of geometry variations at low and high angles of attack. The time required to generate the results from initial surface definition is on the order of several hours, including grid generation, which is compatible with the needs of the design environment.

  6. Technology and Economic Assessment of Innovative Field Drainage Technologies in Denmark

    DEFF Research Database (Denmark)

    Gachango, Florence Gathoni

    Intensive agricultural production in most parts of the world especially in the more developed countries continues to mount pressure on water resources thereby threatening the quality of life in the aquatic ecosystems. With stringent standards such as those stipulated in the European Union Water...... proposed as appropriate solutions to this problem in the Danish context. The feasibility of these technologies with regards to their cost-effectiveness in nutrient mitigation, farmers’ adoption behavior, and environmental policy implementation is assessed in this thesis. The thesis comprises of four papers...... based on survey and case-farms data and utilizes a mix of quantitative and qualitative methods to investigate: i) the farmers’ perception of water quality and their adoption behavior with respect to voluntary nutrient reduction technologies, ii) the farmers willingness to adopt constructed wetland...

  7. Assessment of the health and environmental effects of power generation in the Midwest. Volume II. Ecological effects

    Energy Technology Data Exchange (ETDEWEB)

    Dvorak, A J; Pentecost, E D

    1977-04-01

    This report presents an initial evaluation of the major health and environmental issues associated with increased coal use in the six Midwestern states of Illinois, Indiana, Michigan, Minnesota, Ohio, and Wisconsin. Using an integrated assessment approach, the evaluation proceeds from a base-line scenario of energy demand and facility siting for the period 1975 to 2020. Emphasis is placed on impacts from coal extraction, land reclamation, coal combustion for electrical generation, and coal gasification. The range of potential impacts and constraints is illustrated by a second scenario that represents an expected upper limit for coal utilization in Illinois. Volume I of the report includes a characterization of the energy demand and siting scenarios, coal related technologies, and coal resources, and the related impacts on air quality, water quality, and human health. Volume II includes background information on the native ecosystems, climate, soils, and agricultural land use and a description of the ecological impacts expected from coal utilization in southern Illinois, which as ecosystems representative of a large segment of the six-state area.

  8. Virtues, ecological momentary assessment/intervention and smartphone technology.

    Science.gov (United States)

    Runyan, Jason D; Steinke, Ellen G

    2015-01-01

    Virtues, broadly understood as stable and robust dispositions for certain responses across morally relevant situations, have been a growing topic of interest in psychology. A central topic of discussion has been whether studies showing that situations can strongly influence our responses provide evidence against the existence of virtues (as a kind of stable and robust disposition). In this review, we examine reasons for thinking that the prevailing methods for examining situational influences are limited in their ability to test dispositional stability and robustness; or, then, whether virtues exist. We make the case that these limitations can be addressed by aggregating repeated, cross-situational assessments of environmental, psychological and physiological variables within everyday life-a form of assessment often called ecological momentary assessment (EMA, or experience sampling). We, then, examine how advances in smartphone application (app) technology, and their mass adoption, make these mobile devices an unprecedented vehicle for EMA and, thus, the psychological study of virtue. We, additionally, examine how smartphones might be used for virtue development by promoting changes in thought and behavior within daily life; a technique often called ecological momentary intervention (EMI). While EMA/I have become widely employed since the 1980s for the purposes of understanding and promoting change amongst clinical populations, few EMA/I studies have been devoted to understanding or promoting virtues within non-clinical populations. Further, most EMA/I studies have relied on journaling, PDAs, phone calls and/or text messaging systems. We explore how smartphone app technology provides a means of making EMA a more robust psychological method, EMI a more robust way of promoting positive change, and, as a result, opens up new possibilities for studying and promoting virtues.

  9. Virtues, Ecological Momentary Assessment/Intervention and Smartphone Technology

    Directory of Open Access Journals (Sweden)

    Jason D Runyan

    2015-05-01

    Full Text Available Virtues, generally understood as stable and robust dispositions for certain responses across morally relevant situations, have been a growing topic of interest in psychology. A central topic of discussion has been whether the existence of virtues (as a kind of stable and robust disposition is called into question by studies showing that, to a significant degree, an individual’s situation can influence their responses. In this review, we examine reasons for thinking that these kinds of situational studies are limited in their ability to test dispositional stability and robustness; or, then, whether virtues exist. We make the case that these limitations can be addressed by aggregating repeated, cross-situational assessments of environmental, psychological and physiological variables within everyday life—a form of assessment often called ecological momentary assessment (EMA, or experience sampling. We, then, examine how advances in smartphone application (app technology, and their mass adoption, make these mobile devices an unprecedented vehicle for EMA and, thus, the psychological study of virtue. We, additionally, examine how smartphones might be used for virtue development by promoting changes in thought and behavior within daily life; a technique often called ecological momentary intervention (EMI. While EMA/I have become widely employed since the 1980s for the purposes of understanding and promoting change amongst clinical populations, few EMA/I studies have been devoted to understanding or promoting virtues within non-clinical populations. Further, most EMA/I studies have relied on journaling, PDAs, phone calls and/or text messaging systems. We explore how smartphone app technology provides a means of making EMA a more robust psychological method, EMI a more robust way of promoting positive change, and, as a result, opens up new possibilities for studying and promoting virtues.

  10. Impact of Corrections to the Spallings Volume Calculation on Waste Isolation Pilot Plant Performance Assessment [Poster

    Energy Technology Data Exchange (ETDEWEB)

    Kicker, Dwayne Curtis; Herrick, Courtney G; Zeitler, Todd

    2016-01-01

    The numerical code DRSPALL (from direct release spallings) is written to calculate the volume of Waste Isolation Pilot Plant solid waste subject to material failure and transport to the surface (i.e., spallings) as a result of a hypothetical future inadvertent drilling intrusion into the repository. An error in the implementation of the DRSPALL finite difference equations was discovered and documented in a software problem report in accordance with the quality assurance procedure for software requirements. This paper describes the corrections to DRSPALL and documents the impact of the new spallings data from the modified DRSPALL on previous performance assessment calculations. Updated performance assessments result in more simulations with spallings, which generally translates to an increase in spallings releases to the accessible environment. Total normalized radionuclide releases using the modified DRSPALL data were determined by forming the summation of releases across each potential release pathway, namely borehole cuttings and cavings releases, spallings releases, direct brine releases, and transport releases. Because spallings releases are not a major contributor to the total releases, the updated performance assessment calculations of overall mean complementary cumulative distribution functions for total releases are virtually unchanged. Therefore, the corrections to the spallings volume calculation did not impact Waste Isolation Pilot Plant performance assessment calculation results.

  11. Impact of Corrections to the Spallings Volume Calculation on Waste Isolation Pilot Plant Performance Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Kicker, Dwayne Curtis [Stoller Newport News Nuclear, Inc., Carlsbad, NM (United States); Herrick, Courtney G [Sandia National Laboratories., Carlsbad, NM (United States); Zeitler, Todd [Sandia National Laboratories., Carlsbad, NM (United States)

    2015-11-01

    The numerical code DRSPALL (from direct release spallings) is written to calculate the volume of Waste Isolation Pilot Plant solid waste subject to material failure and transport to the surface (i.e., spallings) as a result of a hypothetical future inadvertent drilling intrusion into the repository. An error in the implementation of the DRSPALL finite difference equations was discovered and documented in a software problem report in accordance with the quality assurance procedure for software requirements. This paper describes the corrections to DRSPALL and documents the impact of the new spallings data from the modified DRSPALL on previous performance assessment calculations. Updated performance assessments result in more simulations with spallings, which generally translates to an increase in spallings releases to the accessible environment. Total normalized radionuclide releases using the modified DRSPALL data were determined by forming the summation of releases across each potential release pathway, namely borehole cuttings and cavings releases, spallings releases, direct brine releases, and transport releases. Because spallings releases are not a major contributor to the total releases, the updated performance assessment calculations of overall mean complementary cumulative distribution functions for total releases are virtually unchanged. Therefore, the corrections to the spallings volume calculation did not impact Waste Isolation Pilot Plant performance assessment calculation results.

  12. Seismic design technology for Breeder Reactor structures. Volume 3: special topics in reactor structures

    Energy Technology Data Exchange (ETDEWEB)

    Reddy, D.P. (ed)

    1983-04-01

    This volume is divided into six chapters: analysis techniques, equivalent damping values, probabilistic design factors, design verifications, equivalent response cycles for fatigue analysis, and seismic isolation. (JDB)

  13. Cost, Time, and Risk Assessment of Different Wave Energy Converter Technology Development Trajectories: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Weber, Jochem W [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Laird, Daniel [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Costello, Ronan [Wave Venture; Roberts, Jesse [Sandia National Laboratories; Bull, Diana [Sandia National Laboratories; Babarit, Aurelien [Ecole Centrale de Nantes; Nielsen, Kim [Ramboll; Ferreira, Claudio Bittencourt [DNV-GL; Kennedy, Ben [Wave Venture

    2017-09-14

    This paper presents a comparative assessment of three fundamentally different wave energy converter technology development trajectories. The three technology development trajectories are expressed and visualised as a function of technology readiness levels and technology performance levels. The assessment shows that development trajectories that initially prioritize technology readiness over technology performance are likely to require twice the development time, consume a threefold of the development cost, and are prone to a risk of technical or commercial failure of one order of magnitude higher than those development trajectories that initially prioritize technology performance over technology readiness.

  14. Assessment vs. appraisal of ethical aspects of health technology assessment: can the distinction be upheld?

    Science.gov (United States)

    Sandman, Lars; Heintz, Emelie

    2014-01-01

    An essential component of health technology assessment (HTA) is the assessment of ethical aspects. In some healthcare contexts, tasks are strictly relegated to different expert groups: the HTA-agencies are limited to assessment of the technology and other actors within the health care sector are responsible for appraisal and recommendations. Ethical aspects of health technologies are considered with reference to values or norms in such a way that may be prescriptive, or offer guidance as to how to act or relate to the issue in question. Given this internal prescriptivity, the distinction between assessment and appraisal seems difficult to uphold, unless the scrutiny stops short of a full ethical analysis of the technology. In the present article we analyse the distinction between assessment and appraisal, using as an example ethical aspects of implementation of GPS-bracelets for people with dementia. It is concluded that for HTA-agencies with a strictly delineated assessment role, the question of how to deal with the internal prescriptivity of ethics may be confusing. A full ethical analysis might result in a definite conclusion as to whether the technology in question is ethically acceptable or not, thereby limiting choices for decision-makers, who are required to uphold certain ethical values and norms. At the same time, depending on the exact nature of such a conclusion, different action strategies can be supported. A positive appraisal within HTA could result in a decision on mandatory implementation, or funding of the technology, thereby making it available to patients, or decisions to allow and even encourage the use of the technology (even if someone else will have to fund it). A neutral appraisal, giving no definite answer as to whether implementation is recommended or not, could result in a laissez-faire attitude towards the technology. A negative appraisal could result in a decision to discourage or even prohibit implementation. This paper presents an

  15. Assessment vs. appraisal of ethical aspects of health technology assessment: can the distinction be upheld?

    Directory of Open Access Journals (Sweden)

    Sandman, Lars

    2014-11-01

    Full Text Available [english] An essential component of health technology assessment (HTA is the assessment of ethical aspects. In some healthcare contexts, tasks are strictly relegated to different expert groups: the HTA-agencies are limited to assessment of the technology and other actors within the health care sector are responsible for appraisal and recommendations. Ethical aspects of health technologies are considered with reference to values or norms in such a way that may be prescriptive, or offer guidance as to how to act or relate to the issue in question. Given this internal prescriptivity, the distinction between assessment and appraisal seems difficult to uphold, unless the scrutiny stops short of a full ethical analysis of the technology. In the present article we analyse the distinction between assessment and appraisal, using as an example ethical aspects of implementation of GPS-bracelets for people with dementia. It is concluded that for HTA-agencies with a strictly delineated assessment role, the question of how to deal with the internal prescriptivity of ethics may be confusing. A full ethical analysis might result in a definite conclusion as to whether the technology in question is ethically acceptable or not, thereby limiting choices for decision-makers, who are required to uphold certain ethical values and norms. At the same time, depending on the exact nature of such a conclusion, different action strategies can be supported. A positive appraisal within HTA could result in a decision on implementation, or of the technology, thereby making it available to patients, or decisions to and even the use of the technology (even if someone else will have to fund it. A neutral appraisal, giving no definite answer as to whether implementation is recommended or not, could result in a towards the technology. A negative appraisal could result in a decision to or even implementation. This paper presents an overview of the implications of different outcomes

  16. Scenario drafting to anticipate future developments in technology assessment

    Directory of Open Access Journals (Sweden)

    Retèl Valesca P

    2012-08-01

    Full Text Available Abstract Background Health Technology Assessment (HTA information, and in particular cost-effectiveness data is needed to guide decisions, preferably already in early stages of technological development. However, at that moment there is usually a high degree of uncertainty, because evidence is limited and different development paths are still possible. We developed a multi-parameter framework to assess dynamic aspects of a technology -still in development-, by means of scenario drafting to determine the effects, costs and cost-effectiveness of possible future diffusion patterns. Secondly, we explored the value of this method on the case of the clinical implementation of the 70-gene signature for breast cancer, a gene expression profile for selecting patients who will benefit most from chemotherapy. Methods To incorporate process-uncertainty, ten possible scenarios regarding the introduction of the 70-gene signature were drafted with European experts. Out of 5 most likely scenarios, 3 drivers of diffusion (non-compliance, technical failure, and uptake were quantitatively integrated in a decision-analytical model. For these scenarios, the cost-effectiveness of the 70-gene signature expressed in Incremental Cost-Effectiveness Ratios (ICERs was compared to clinical guidelines, calculated from the past (2005 until the future (2020. Results In 2005 the ICER was €1,9 million/quality-adjusted-life-year (QALY, meaning that the 70-gene signature was not yet cost-effective compared to the current clinical guideline. The ICER for the 70-gene signature improved over time with a range of €1,9 million to €26,145 in 2010 and €1,9 million to €11,123/QALY in 2020 depending on the separate scenario used. From 2010, the 70-gene signature should be cost-effective, based on the combined scenario. The uptake-scenario had strongest influence on the cost-effectiveness. Conclusions When optimal diffusion of a technology is sought, incorporating process

  17. The space shuttle payload planning working groups. Volume 10: Space technology

    Science.gov (United States)

    1973-01-01

    The findings and recommendations of the Space Technology group of the space shuttle payload planning activity are presented. The elements of the space technology program are: (1) long duration exposure facility, (2) advanced technology laboratory, (3) physics and chemistry laboratory, (4) contamination experiments, and (5) laser information/data transmission technology. The space technology mission model is presented in tabular form. The proposed experiments to be conducted by each test facility are described. Recommended approaches for user community interfacing are included.

  18. Efficacy of volume navigation in assessment of extent of breast cancer

    Institute of Scientific and Technical Information of China (English)

    Satoko Suzuki; Miki Mori; Rena Shigenaga; Kenya Suzuki; Katsutoshi Enokido; Terumasa Sawada; Masanori Hirose; Seigo Nakamura

    2012-01-01

    Objective Volume navigation (Vnav) combines real-time ultrasound (US) with previously acquired volume data from magnetic resonance imaging (MRI) data into a single display. The efficacy of Vnav for preoperative assessment of the extent of breast cancer lesions was evaluated in the present study.Methods Twenty-nine breast cancer patients were evaluated using Vnav during second-look US or preoperative mapping. Retrospective chart review was performed. Correlation detection rates and pathological results were evaluated.Results Vnav identified lesions that were initially detected on MRI in 23 of 29 patients (79.3%). Of the 23 patients who had US correlated lesions, pathological diagnoses of the corresponding lesions were as follows: benign (n=9) and malignant (n=14).Conclusion Vnav may be a useful technique for identification of the extent of breast cancer lesions.

  19. Electric and Hybrid Vehicle System Research and Development Project: Hybrid Vehicle Potential Assessment. Volume 1. Summary

    Energy Technology Data Exchange (ETDEWEB)

    Surber, F.T.

    1979-09-30

    The results of investigations conducted under Ce Hybrid Vehicle Potential Assessment Task are reported in 10 volumes. This volume contains an overview of the study and its results. The purpose of the overall study was to determine if the petroleum fuel savings achievable through the use of hybrid electric vehicles is worth the R and D expenditures needed to develop the hybrid vehicles and to determine R and D priorities. It was concluded that by the year 2010 hybrid vehicles could replace 80% of the automotive power that would otherwise be produced from petroleum fuels; the public should not suffer any mobility loss through the use of hybrid vehicles; high initial and life-cycle costs are a limiting factor; and R and D funds should be spent for systems design and the development of low-cost batteries and controllers. (LCL)

  20. Annual Proceedings of Selected Papers on the Practice of Educational Communications and Technology Presented at the Annual Convention of the Association for Educational Communications and Technology (33rd, Anaheim, California, 2010). Volume 2

    Science.gov (United States)

    Simonson, Michael, Ed.

    2010-01-01

    For the thirty-third year, the Research and Theory Division of the Association for Educational Communications and Technology (AECT) is sponsoring the publication of these Proceedings. This is Volume #2 of the 33rd "Annual Proceedings of Selected Papers on the Practice of Educational Communications and Technology." This volume includes…