WorldWideScience

Sample records for technology assessment roadmap

  1. Incorporating the Technology Roadmap Uncertainties into the Project Risk Assessment

    International Nuclear Information System (INIS)

    Bonnema, B.E.

    2002-01-01

    This paper describes two methods, Technology Roadmapping and Project Risk Assessment, which were used to identify and manage the technical risks relating to the treatment of sodium bearing waste at the Idaho National Engineering and Environmental Laboratory. The waste treatment technology under consideration was Direct Vitrification. The primary objective of the Technology Roadmap is to identify technical data uncertainties for the technologies involved and to prioritize the testing or development studies to fill the data gaps. Similarly, project management's objective for a multi-million dollar construction project includes managing all the key risks in accordance to DOE O 413.3 - ''Program and Project Management for the Acquisition of Capital Assets.'' In the early stages, the Project Risk Assessment is based upon a qualitative analysis for each risk's probability and consequence. In order to clearly prioritize the work to resolve the technical issues identified in the Technology Roadmap, the issues must be cross- referenced to the project's Risk Assessment. This will enable the project to get the best value for the cost to mitigate the risks

  2. Scenario-based roadmapping assessing nuclear technology development paths for future nuclear energy system scenarios

    International Nuclear Information System (INIS)

    Van Den Durpel, Luc; Roelofs, Ferry; Yacout, Abdellatif

    2009-01-01

    Nuclear energy may play a significant role in a future sustainable energy mix. The transition from today's nuclear energy system towards a future more sustainable nuclear energy system will be dictated by technology availability, energy market competitiveness and capability to achieve sustainability through the nuclear fuel cycle. Various scenarios have been investigated worldwide each with a diverse set of assumptions on the timing and characteristics of new nuclear energy systems. Scenario-based roadmapping combines the dynamic scenario-analysis of nuclear energy systems' futures with the technology roadmap information published and analysed in various technology assessment reports though integrated within the nuclear technology roadmap Nuclear-Roadmap.net. The advantages of this combination is to allow mutual improvement of scenario analysis and nuclear technology roadmapping providing a higher degree of confidence in the assessment of nuclear energy system futures. This paper provides a description of scenario-based roadmapping based on DANESS and Nuclear-Roadmap.net. (author)

  3. Fundamentals of technology roadmapping

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, M.L.; Bray, O.H.

    1997-04-01

    Technology planning is important for many reasons. Globally, companies are facing many competitive problems. Technology roadmapping, a form of technology planning can help deal with this increasingly competitive environment. While it has been used by some companies and industries, the focus has always been on the technology roadmap as a product, not on the process. This report focuses on formalizing the process so that it can be more broadly and easily used. As a DOE national security laboratory with R&D as a major product, Sandia must do effective technology planning to identify and develop the technologies required to meet its national security mission. Once identified, technology enhancements or new technologies may be developed internally or collaboratively with external partners. For either approach, technology roadmapping, as described in this report, is an effective tool for technology planning and coordination, which fits within a broader set of planning activities. This report, the second in a series on technology roadmapping, develops and documents this technology roadmapping process, which can be used by Sandia, other national labs, universities, and industry. The main benefit of technology roadmapping is that it provides information to make better technology investment decisions by identifying critical technologies and technology gaps and identifying ways to leverage R&D investments. It can also be used as a marketing tool. Technology roadmapping is critical when the technology investment decision is not straight forward. This occurs when it is not clear which alternative to pursue, how quickly the technology is needed, or when there is a need to coordinate the development of multiple technologies. The technology roadmapping process consists of three phases - preliminary activity, development of the technology roadmap, and follow-up activity.

  4. Technology Assessment and Roadmap for the Emergency Radiation Dose Assessment Program

    Energy Technology Data Exchange (ETDEWEB)

    Turteltaub, K W; Hartman-Siantar, C; Easterly, C; Blakely, W

    2005-10-03

    A Joint Interagency Working Group (JIWG) under the auspices of the Department of Homeland Security Office of Research and Development conducted a technology assessment of emergency radiological dose assessment capabilities as part of the overall need for rapid emergency medical response in the event of a radiological terrorist event in the United States. The goal of the evaluation is to identify gaps and recommend general research and development needs to better prepare the Country for mitigating the effects of such an event. Given the capabilities and roles for responding to a radiological event extend across many agencies, a consensus of gaps and suggested development plans was a major goal of this evaluation and road-mapping effort. The working group consisted of experts representing the Departments of Homeland Security, Health and Human Services (Centers for Disease Control and the National Institutes of Health), Food and Drug Administration, Department of Defense and the Department of Energy's National Laboratories (see appendix A for participants). The specific goals of this Technology Assessment and Roadmap were to: (1) Describe the general context for deployment of emergency radiation dose assessment tools following terrorist use of a radiological or nuclear device; (2) Assess current and emerging dose assessment technologies; and (3) Put forward a consensus high-level technology roadmap for interagency research and development in this area. This report provides a summary of the consensus of needs, gaps and recommendations for a research program in the area of radiation dosimetry for early response, followed by a summary of the technologies available and on the near-term horizon. We then present a roadmap for a research program to bring present and emerging near-term technologies to bear on the gaps in radiation dose assessment and triage. Finally we present detailed supporting discussion on the nature of the threats we considered, the status of

  5. Metalcasting Industry Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1998-01-01

    The Roadmap sets out the strategy for pursuing near-, mid-, and long-term goals set out by industry and for carrying out the cooperative agreement between the U.S. Department of Energy and industry. The Roadmap outlines key goals for products and markets, materials technology, manufacturing technology, environmental technology, human resources, and industry health programs. The Roadmap sets out the strategy for pursuing near-, mid-, and long-term goals set out by industry and for carrying out the cooperative agreement between the U.S. Department of Energy and industry. The Roadmap sets out the strategy for pursuing near-, mid-, and long-term goals set out by industry and for carrying out the cooperative agreement between the U.S. Department of Energy and industry.

  6. Technology Roadmaps: Cement

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    To support its roadmap work focusing on key technologies for emissions reductions, the International Energy Agency (IEA) also investigated one particular industry: cement. Cement production includes technologies that are both specific to this industry and those that are shared with other industries (e.g., grinding, fuel preparation, combustion, crushing, transport). An industry specific roadmap provides an effective mechanism to bring together several technology options. It outlines the potential for technological advancement for emissions reductions in one industry, as well as potential cross-industry collaboration.

  7. Alumina Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2002-02-01

    The Alumina Technology Roadmap outlines a comprehensive long-term research and development plan that defines the industry's collective future and establishes a clear pathway forward. It emphasizes twelve high-priority R&D areas deemed most significant in addressing the strategic goals.

  8. Technology Roadmaps: Smart Grids

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    The development of Technology Roadmaps: Smart Grids -- which the IEA defines as an electricity network that uses digital and other advanced technologies to monitor and manage the transport of electricity from all generation sources to meet the varying electricity demands of end users -- is essential if the global community is to achieve shared goals for energy security, economic development and climate change mitigation. Unfortunately, existing misunderstandings of exactly what smart grids are and the physical and institutional complexity of electricity systems make it difficult to implement smart grids on the scale that is needed. This roadmap sets out specific steps needed over the coming years to achieve milestones that will allow smart grids to deliver a clean energy future.

  9. OHVT technology roadmap

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-10-01

    The Office of Heavy Vehicle Technologies (OHVT) Technology Roadmap presents the OHVT multiyear program plan. It was developed in response to recommendations by DOE`s heavy vehicle industry customers, including truck and bus manufacturers, diesel engine manufacturers, fuel producers, suppliers to these industries, and the trucking industry. The technical plan is presented for three classes of trucks: (1) class 7-8 (large, on-highway trucks); (2) class 3-6 (medium duty trucks); and (3) class 1-2 (pickups, vans, and sport utility vehicles). The Roadmap documents program goals, technical targets, and technical approaches. Issues addressed include engine efficiency, fuel efficiency, power requirements, emissions, and fuel flexibility. 8 figs., 9 tabs.

  10. Technology Roadmaps: Wind Energy

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    Wind energy is perhaps the most advanced of the 'new' renewable energy technologies, but there is still much work to be done. This roadmap identifies the key tasks that must be undertaken in order to achieve a vision of over 2 000 GW of wind energy capacity by 2050. Governments, industry, research institutions and the wider energy sector will need to work together to achieve this goal. Best technology and policy practice must be identified and exchanged with emerging economy partners, to enable the most cost-effective and beneficial development.

  11. Thermally activated technologies: Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2003-05-01

    The purpose of this Technology Roadmap is to outline a set of actions for government and industry to develop thermally activated technologies for converting America’s wasted heat resources into a reservoir of pollution-free energy for electric power, heating, cooling, refrigeration, and humidity control. Fuel flexibility is important. The actions also cover thermally activated technologies that use fossil fuels, biomass, and ultimately hydrogen, along with waste heat.

  12. Aluminum Industry Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2003-02-01

    This roadmap describes the industry's R&D strategy, priorities, milestones, and performance targets for achieving its long-term goals. It accounts for changes in the industry and the global marketplace since the first roadmap was published in 1997. An updated roadmap was published November 2001. (PDF 1.1 MB).

  13. Technology Roadmap: Hydropower

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-07-01

    Hydropower could double its contribution by 2050, reaching 2,000 GW of global capacity and over 7,000 TWh. This achievement, driven primarily by the quest of clean electricity, could prevent annual emissions of up to 3 billion tonnes of CO2 from fossil-fuel plants. The bulk of this growth would come from large plants in emerging economies and developing countries. Hydroelectricity’s many advantages include reliability, proven technology, large storage capacity, and very low operating and maintenance costs. Hydropower is highly flexible, a precious asset for electricity network operators, especially given rapid expansion of variable generation from other renewable energy technologies such as wind power and photovoltaics. Many hydropower plants also provide flood control, irrigation, navigation and freshwater supply. The technology roadmap for Hydropower details action needed from policy makers to allow hydroelectric production to double, and addresses necessary conditions, including resolving environmental issues and gaining public acceptance.

  14. Technology Roadmaps: Nuclear Energy

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    This nuclear energy roadmap has been prepared jointly by the IEA and the OECD Nuclear Energy Agency (NEA). Unlike most other low-carbon energy sources, nuclear energy is a mature technology that has been in use for more than 50 years. The latest designs for nuclear power plants build on this experience to offer enhanced safety and performance, and are ready for wider deployment over the next few years. Several countries are reactivating dormant nuclear programmes, while others are considering nuclear for the first time. China in particular is already embarking on a rapid nuclear expansion. In the longer term, there is great potential for new developments in nuclear energy technology to enhance nuclear's role in a sustainable energy future.

  15. Technology Roadmap: Energy Storage

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-03-01

    Energy storage technologies are valuable components in most energy systems and could be an important tool in achieving a low-carbon future. These technologies allow for the decoupling of energy supply and demand, in essence providing a valuable resource to system operators. There are many cases where energy storage deployment is competitive or near-competitive in today's energy system. However, regulatory and market conditions are frequently ill-equipped to compensate storage for the suite of services that it can provide. Furthermore, some technologies are still too expensive relative to other competing technologies (e.g. flexible generation and new transmission lines in electricity systems). One of the key goals of this new roadmap is to understand and communicate the value of energy storage to energy system stakeholders. This will include concepts that address the current status of deployment and predicted evolution in the context of current and future energy system needs by using a ''systems perspective'' rather than looking at storage technologies in isolation.

  16. Catalyst technology roadmap report

    Energy Technology Data Exchange (ETDEWEB)

    Jackson, N.B.

    1997-06-01

    This report outlines the future technology needs of the Chemical Industry in the area of catalysis and is a continuation of the process that produced the report Technology Vision 2020: The U.S. Chemical Industry and the Council for Chemical Research`s (CCR) Chemical Synthesis Team follow-up work in chemical synthesis. Vision 2020 developed a 25-year vision for the chemical industry and outlined the challenges to be addressed in order to achieve this vision. This report, which outlines the catalysis technology roadmap, is based on the output of the CCR`s Chemical Synthesis Team, plus a workshop held March -20-21, 1997, which included about 50 participants, with catalysis experts from industry, academia, and government. It is clear that all participants view catalysis as a fundamental driver to the 0274 economic and environmental viability of the chemical industry. Advances in catalytic science and technology are among the most crucial challenges to achieving the goals of the chemical industry advanced in Vision 2020.

  17. Technology Roadmapping for Waste Management

    International Nuclear Information System (INIS)

    Bray, O.

    2003-01-01

    Technology roadmapping can be an effective strategic technology planning tool. This paper describes a process for customizing a generic technology roadmapping process. Starting with a generic process reduces the learning curve and speeds up the roadmap development. Similarly, starting with a generic domain model provides leverage across multiple applications or situations within the domain. A process that combines these two approaches facilitates identifying technology gaps and determining common core technologies that can be reused for multiple applications or situations within the domain. This paper describes both of these processes and how they can be integrated. A core team and a number of technology working groups develop the technology roadmap, which includes critical system requirements and targets, technology areas and metrics for each area, and identifies and evaluates possible technology alternatives to recommend the most appropriate ones to pursue. A generalized waste management model, generated by considering multiple situations or applications in terms of a generic waste management model, provides the domain requirements for the technology roadmapping process. Finally, the paper discusses lessons learns from a number of roadmapping projects

  18. Forest Products Industry Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2010-04-01

    This document describes the forest products industry's research and development priorities. The original technology roadmap published by the industry in 1999 and was most recently updated in April 2010.

  19. National Algal Biofuels Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Ferrell, John [Dept. of Energy (DOE), Washington DC (United States); Sarisky-Reed, Valerie [Dept. of Energy (DOE), Washington DC (United States)

    2010-05-01

    The framework for National Algal Biofuels Technology Roadmap was constructed at the Algal Biofuels Technology Roadmap Workshop, held December 9-10, 2008, at the University of Maryland-College Park. The Workshop was organized by the Biomass Program to discuss and identify the critical challenges currently hindering the development of a domestic, commercial-scale algal biofuels industry. This Roadmap presents information from a scientific, economic, and policy perspectives that can support and guide RD&D investment in algal biofuels. While addressing the potential economic and environmental benefits of using algal biomass for the production of liquid transportation fuels, the Roadmap describes the current status of algae RD&D. In doing so, it lays the groundwork for identifying challenges that likely need to be overcome for algal biomass to be used in the production of economically viable biofuels.

  20. Roadmap 2030: The U.S. Concrete Industry Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2002-12-01

    Roadmap 2030: The U.S. Concrete Industry Technology Roadmap tracks the eight goals published in the American Concrete Institute Strategic Development Council's Vision 2030: A Vision for the U.S. Concrete Industry. Roadmap 2030 highlights existing state-of-the-art technologies and emerging scientific advances that promise high potential for innovation, and predicts future technological needs. It defines enabling research opportunities and proposes areas where governmental-industrial-academic partnerships can accelerate the pace of development. Roadmap 2030 is a living document designed to continually address technical, institutional, and market changes.

  1. OHVT technology roadmap[2000]; TOPICAL

    International Nuclear Information System (INIS)

    Bradley, R.A.

    2000-01-01

    The OHVT Technology Roadmap for 2000 presents the multiyear program plan of the U.S. DOE's Office of Heavy Vehicle Technologies (OHVT). It is an update of the 1997 plan, reflecting changes in regulations and ongoing discussions with DOE's heavy vehicle customers. The technical plan covers three classes of trucks: (1) class 7-8 (large, on-highway trucks); (2) class 3-6 (medium duty trucks); (3) class 1-2 (pickups, vans, and sport utility vehicles) as well as enabling and supporting technologies. The Roadmap documents program goals, schedules, and milestones

  2. Concentrating Solar Power. Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-10-15

    Concentrating solar power can contribute significantly to the world's energy supply. As shown in this roadmap, this decade is a critical window of opportunity during which CSP could become a competitive source of electrical power to meet peak and intermediate loads in the sunniest parts of the world. This roadmap identifies technology, economy and policy goals and milestones needed to support the development and deployment of CSP, as well as ongoing advanced research in CSF. It also sets out the need for governments to implement strong, balanced policies that favour rapid technological progress, cost reductions and expanded industrial manufacturing of CSP equipment to enable mass deployment. Importantly, this roadmap also establishes a foundation for greater international collaboration. The overall aim of this roadmap is to identify actions required - on the part of all stakeholders - to accelerate CSP deployment globally. Many countries, particularly in emerging regions, are only just beginning to develop CSP. Accordingly, milestone dates should be considered as indicative of urgency, rather than as absolutes. This roadmap is a work in progress. As global CSP efforts advance and an increasing number of CSP applications are developed, new data will provide the basis for updated analysis. The IEA will continue to track the evolution of CSP technology and its impacts on markets, the power sector and regulatory environments, and will update its analysis and set additional tasks and milestones as new learning comes to light.

  3. Scientific Assessment in support of the Materials Roadmap enabling Low Carbon Energy Technologies: Hydrogen and Fuel Cells

    DEFF Research Database (Denmark)

    Cerri, I.; Lefebvre-Joud, F.; Holtappels, Peter

    A group of experts from European research organisations and industry have assessed the state of the art and future needs for materials' R&D for hydrogen and fuel cell technologies. The work was performed as input to the European Commission's roadmapping exercise on materials for the European...... Strategic Energy Technology Plan. The report summarises the results, including key targets identified for medium term (2020/2030) and long term (2050) timescales....

  4. Technology Roadmaps: Biofuels for Transport

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    Biofuels could provide up to 27% of total transport fuel worldwide by 2050. The use of transport fuels from biomass, when produced sustainably, can help cut petroleum use and reduce CO2 emissions in the transport sector, especially in heavy transport. Sustainable biofuel technologies, in particular advanced biofuels, will play an important role in achieving this roadmap vision. The roadmap describes the steps necessary to realise this ambitious biofuels target; identifies key actions by different stakeholders, and the role for government policy to adopt measures needed to ensure the sustainable expansion of both conventional and advanced biofuel production.

  5. Technology Roadmaps: How2Guide for Wind Energy Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-03-01

    Whether in OECD, emerging or developing country economies, governments are increasingly looking to diversify their energy mix beyond simply fossil fuels. While wind energy is developing towards a mainstream, competitive and reliable technology, a range of barriers can delay progress, such as financing, grid integration, social acceptance and aspects of planning processes. National and regional technology roadmaps can play a key role in supporting wind energy development and implementation, helping countries to identify priorities and pathways tailored to local resources and markets. Recognising this, the IEA has started the How2Guides - a new series co-ordinated by the International Low-Carbon Energy Technology Platform to address the need for more focused guidance in the development of national roadmaps, or strategies, for specific low-carbon technologies. This builds on the success of the IEA global technology roadmap series and responds to a growing number of requests for IEA guidance to adapt the findings of the IEA global technology roadmaps to national circumstances. A successful roadmap contains a clear statement of the desired outcome, followed by a specific pathway for reaching it. The How2Guide for Wind Energy builds on the IEA well established methodology for roadmap development and shares wind specific recommendations on how to address the four phases to developing and implementing a wind energy roadmap: Planning; Visioning; Development; and Implementation. The manual also offers menus of recommendations on policy and technical options for deployment of utility-scale wind energy installations. A matrix of barriers-versus-realistic solutions options is cross-listed with considerations such as planning, development, electricity market and system, infrastructure, and finance and economics. Drawing on several case studies from around the globe, as well as on the IEA Technology Roadmap for Wind Energy, the How2Guide for Wind Energy it is intended as a

  6. River Protection Project Technology and Innovation Roadmap.

    Energy Technology Data Exchange (ETDEWEB)

    Reid, D. S. [Hanford Site (HNF), Richland, WA (United States); Wooley, T. A. [Hanford Site (HNF), Richland, WA (United States); Kelly, S. E. [Hanford Site (HNF), Richland, WA (United States)

    2017-08-14

    The Technology and Innovation Roadmap is a planning tool for WRPS management, DOE ORP, DOE EM, and others to understand the risks and technology gaps associated with the RPP mission. The roadmap identifies and prioritizes technical areas that require technology solutions and underscores where timely and appropriate technology development can have the greatest impact to reduce those risks and uncertainties. The roadmap also serves as a tool for determining allocation of resources.

  7. TECHNOLOGY ROADMAPPING FOR IAEA SEALS.

    Energy Technology Data Exchange (ETDEWEB)

    HOFFHEINS,B.; ANNESE,C.; GOODMAN,M.; OCONNOR,W.; GUSHUE,S.; PEPPER,S.

    2003-07-13

    In the fall of 2002, the U.S. Support Program (USSP) initiated an effort to define a strategy or ''roadmap'' for future seals technologies and to develop a generalized process for planning safeguards equipment development, which includes seals and other safeguards equipment. The underlying objectives of the USSP include becoming more proactive than reactive in addressing safeguards equipment needs, helping the IAEA to maintain an inventory of cost-effective, reliable, and effective safeguards equipment, establishing a long-term planning horizon, and securing IAEA ownership in the process of effective requirements definition and timely transitioning of new or improved systems for IAEA use. At an initial workshop, seals, their functions, performance issues, and future embodiments were discussed in the following order: adhesive seals, metal seals, passive and active loop seals, ultrasonic seals, tamper indicating enclosures (including sample containers, equipment enclosures, and conduits). Suggested improvements to these technologies focused largely on a few themes: (1) The seals must be applied quickly, easily, and correctly; (2) Seals and their associated equipment should not unduly add bulk or weight to the inspectors load; (3) Rapid, in-situ verifiability of seals is desirable; and (4) Seal systems for high risk or high value applications should have two-way, remote communications. Based upon these observations and other insights, the participants constructed a skeletal approach for seals technology planning. The process begins with a top-level review of the fundamental safeguards requirements and extraction of required system features, which is followed by analysis of suitable technologies and identification of technology gaps, and finally by development of a planning schedule for system improvements and new technology integration. Development of a comprehensive procedure will require the partnership and participation of the IAEA. The

  8. TECHNOLOGY ROADMAPPING FOR IAEA SEALS

    International Nuclear Information System (INIS)

    HOFFHEINS, B.; ANNESE, C.; GOODMAN, M.; OCONNOR, W.; GUSHUE, S.; PEPPER, S.

    2003-01-01

    In the fall of 2002, the U.S. Support Program (USSP) initiated an effort to define a strategy or ''roadmap'' for future seals technologies and to develop a generalized process for planning safeguards equipment development, which includes seals and other safeguards equipment. The underlying objectives of the USSP include becoming more proactive than reactive in addressing safeguards equipment needs, helping the IAEA to maintain an inventory of cost-effective, reliable, and effective safeguards equipment, establishing a long-term planning horizon, and securing IAEA ownership in the process of effective requirements definition and timely transitioning of new or improved systems for IAEA use. At an initial workshop, seals, their functions, performance issues, and future embodiments were discussed in the following order: adhesive seals, metal seals, passive and active loop seals, ultrasonic seals, tamper indicating enclosures (including sample containers, equipment enclosures, and conduits). Suggested improvements to these technologies focused largely on a few themes: (1) The seals must be applied quickly, easily, and correctly; (2) Seals and their associated equipment should not unduly add bulk or weight to the inspectors' load; (3) Rapid, in-situ verifiability of seals is desirable; and (4) Seal systems for high risk or high value applications should have two-way, remote communications. Based upon these observations and other insights, the participants constructed a skeletal approach for seals technology planning. The process begins with a top-level review of the fundamental safeguards requirements and extraction of required system features, which is followed by analysis of suitable technologies and identification of technology gaps, and finally by development of a planning schedule for system improvements and new technology integration. Development of a comprehensive procedure will require the partnership and participation of the IAEA. The presentation will include a

  9. Technology Roadmaps: Solar photovoltaic energy

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    Solar PV power is a commercially available and reliable technology with a significant potential for long-term growth in nearly all world regions. This roadmap estimates that by 2050, PV will provide around 11% of global electricity production and avoid 2.3 gigatonnes (Gt) of CO2 emissions per year. Achieving this roadmap's vision will require an effective, long-term and balanced policy effort in the next decade to allow for optimal technology progress, cost reduction and ramp-up of industrial manufacturing for mass deployment. Governments will need to provide long-term targets and supporting policies to build confidence for investments in manufacturing capacity and deployment of PV systems. PV will achieve grid parity -- i.e. competitiveness with electricity grid retail prices -- by 2020 in many regions. As grid parity is achieved, the policy framework should evolve towards fostering self-sustained markets, with the progressive phase-out of economic incentives, but maintaining grid access guarantees and sustained R&D support.

  10. Technology Roadmap for the Petroleum Industry

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2000-02-01

    The petroleum refining industry defined a detailed R&D roadmap, Technology Roadmap for the Petroleum Industry, to identify high-priority areas for technology R&D. Those priorities helped ITP target cost-shared solicitations and guide development of a balanced R&D portfolio to yield useful results in the near, mid, and long-term.

  11. Technology Roadmaps: Concentrating Solar Power

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    The emerging technology known as concentrating solar power, or CSP, holds much promise for countries with plenty of sunshine and clear skies. Its electrical output matches well the shifting daily demand for electricity in places where airconditioning systems are spreading. When backed up by thermal storage facilities and combustible fuel, it offers utilities electricity that can be dispatched when required, enabling it to be used for base, shoulder and peak loads. Within about one to two decades, it will be able to compete with coal plants that emit high levels of CO2. The sunniest regions, such as North Africa, may be able to export surplus solar electricity to neighbouring regions, such as Europe, where demand for electricity from renewable sources is strong. In the medium-to-longer term, concentrating solar facilities can also produce hydrogen, which can be blended with natural gas, and provide low-carbon liquid fuels for transport and other end-use sectors. For CSP to claim its share of the coming energy revolution, concerted action is required over the next ten years by scientists, industry, governments, financing institutions and the public. This roadmap is intended to help drive these indispensable developments.

  12. Lunar Surface Systems Supportability Technology Development Roadmap

    Science.gov (United States)

    Oeftering, Richard C.; Struk, Peter M.; Green, Jennifer L.; Chau, Savio N.; Curell, Philip C.; Dempsey, Cathy A.; Patterson, Linda P.; Robbins, William; Steele, Michael A.; DAnnunzio, Anthony; hide

    2011-01-01

    The Lunar Surface Systems Supportability Technology Development Roadmap is a guide for developing the technologies needed to enable the supportable, sustainable, and affordable exploration of the Moon and other destinations beyond Earth. Supportability is defined in terms of space maintenance, repair, and related logistics. This report considers the supportability lessons learned from NASA and the Department of Defense. Lunar Outpost supportability needs are summarized, and a supportability technology strategy is established to make the transition from high logistics dependence to logistics independence. This strategy will enable flight crews to act effectively to respond to problems and exploit opportunities in an environment of extreme resource scarcity and isolation. The supportability roadmap defines the general technology selection criteria. Technologies are organized into three categories: diagnostics, test, and verification; maintenance and repair; and scavenge and recycle. Furthermore, "embedded technologies" and "process technologies" are used to designate distinct technology types with different development cycles. The roadmap examines the current technology readiness level and lays out a four-phase incremental development schedule with selection decision gates. The supportability technology roadmap is intended to develop technologies with the widest possible capability and utility while minimizing the impact on crew time and training and remaining within the time and cost constraints of the program.

  13. Technology Roadmap: Lab-on-a-Chip

    Directory of Open Access Journals (Sweden)

    Pattharaporn Suntharasaj

    2010-04-01

    Full Text Available With the integration of microfluidic and MEMS technologies, biochips such as the lab-on-a-chip (LOC devices are at the brink of revolutionizing the medical disease diagnostics industries. Remarkable advancements in the biochips industry are making products resembling Star Trek.s "tricorder" and handheld medical scanners a reality. Soon, doctors can screen for cancer at the molecular level without costly and cumbersome equipments, and discuss treatment plans based on immediate lab results. This paper develops a roadmap for a hypothetical company (XI which is seeking to be successful in this market. The roadmapping process starts with gathering data through literature research and expert opinions, and progress through defining the market/product/technology layers, linking and integrating these layers, and finally creating a labon-a-chip for disease diagnostics technology roadmap.

  14. Technology Roadmaps: Bioenergy for Heat and Power

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-08-01

    The Technology Roadmap Bioenergy for Heat and Power highlights the importance of bioenergy in providing heat in the buildings sector and in industry, and shows what contribution it could make to meeting steadlily growing world electricity demand. The critical role of sustainability as well as the importance of international trade in meeting the projected demand for bioenergy, are highlighted in the roadmap, as well as the need for large-scale biomass plants in providing The roadmap identifies key actions by different stakeholders in the bioenergy sector, and sets out milestones for technology development in order to achieve a doubling of global bioenergy supply by 2050. It addresses the need for further R&D efforts, highlights measures to ensure sustainability of biomass production, and underlines the need for international collaboration to enhance the production and use of sustainable, modern bioenergy in different world regions.

  15. Technology Roadmaps: Bioenergy for Heat and Power

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-07-01

    The Technology Roadmap Bioenergy for Heat and Power highlights the importance of bioenergy in providing heat in the buildings sector and in industry, and shows what contribution it could make to meeting steadlily growing world electricity demand. The critical role of sustainability as well as the importance of international trade in meeting the projected demand for bioenergy, are highlighted in the roadmap, as well as the need for large-scale biomass plants in providing The roadmap identifies key actions by different stakeholders in the bioenergy sector, and sets out milestones for technology development in order to achieve a doubling of global bioenergy supply by 2050. It addresses the need for further R&D efforts, highlights measures to ensure sustainability of biomass production, and underlines the need for international collaboration to enhance the production and use of sustainable, modern bioenergy in different world regions.

  16. AFCI Safeguards Enhancement Study: Technology Development Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Leon E.; Dougan, A.; Tobin, Stephen; Cipiti, B.; Ehinger, Michael H.; Bakel, A. J.; Bean, Robert; Grate, Jay W.; Santi, P.; Bryan, Steven; Kinlaw, M. T.; Schwantes, Jon M.; Burr, Tom; Lehn, Scott A.; Tolk, K.; Chichester, David; Menlove, H.; Vo, D.; Duckworth, Douglas C.; Merkle, P.; Wang, T. F.; Duran, F.; Nakae, L.; Warren, Glen A.; Friedrich, S.; Rabin, M.

    2008-12-31

    The Advanced Fuel Cycle Initiative (AFCI) Safeguards Campaign aims to develop safeguards technologies and processes that will significantly reduce the risk of proliferation in the U.S. nuclear fuel cycle of tomorrow. The Safeguards Enhancement Study was chartered with identifying promising research and development (R&D) directions over timescales both near-term and long-term, and under safeguards oversight both domestic and international. This technology development roadmap documents recognized gaps and needs in the safeguarding of nuclear fuel cycles, and outlines corresponding performance targets for each of those needs. Drawing on the collective expertise of technologists and user-representatives, a list of over 30 technologies that have the potential to meet those needs was developed, along with brief summaries of each candidate technology. Each summary describes the potential impact of that technology, key research questions to be addressed, and prospective development milestones that could lead to a definitive viability or performance assessment. Important programmatic linkages between U.S. agencies and offices are also described, reflecting the emergence of several safeguards R&D programs in the U.S. and the reinvigoration of nuclear fuel cycles across the globe.

  17. Electricity Technology Roadmap. Technology for the Sustainable Society. 2025

    International Nuclear Information System (INIS)

    2002-01-01

    The Dutch Electricity Technology Roadmap Initiative is being developed by KEMA as a joint effort of Dutch and European experts of universities, industry and (non)governmental organisations. It aims to assess how to structure the ongoing collaborative research and technological advancement, the exploration of the opportunities and the threats for the electricity-based innovations over the next twenty-five years. In addition it analyses how to manage the transition towards a knowledge based economy and a more sustainable society. To date, about 100 organisations have participated with KEMA and its sponsors in shaping a comprehensive vision of the opportunities to structure the knowledge based economy in the Digital Society with as basis the increase of electricity's value to society. This vision is being translated into a set of technology development destinations and a total of six distinct initiatives for targeted projects. KEMA is leading this ongoing road-mapping effort, with the support of TENNET and EPRI (USA). The Dutch power generation utilities and the Ministry of Economics (EZ) financially support the work. It is an investment in the future of the Dutch knowledge based economy and a guidance to structure and strengthen the value of public and private RandD investments. The Electricity Technology Roadmap Initiative explores a period of fast regulatory, political, technological and institutional change in the electricity enterprise and in the society. The strategic choices made in this period of change can have profound consequences on whether future opportunities are opened or closed, and whether threats increase or are eliminated The reluctance to proceed with important changes is understandable, given the extreme uncertainty under which decisions must be made. No regrets solutions may be appropriate in some circumstances. These situations highlight the need for foresight and the importance of strategic roadmapping. The first year of the Roadmap

  18. Technology Roadmaps: China Wind Energy Development Roadmap 2050

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    The report shows how China, already the world's largest wind market, could reach 1 000 GW of wind power by the middle of the century, an achievement that would reduce carbon dioxide emissions by 1.5 gigatonnes per year, or roughly equivalent to the combined CO2 emissions of Germany, France and Italy in 2009. The China Wind Energy Roadmap is the first national roadmap that has been developed by a country with IEA support, drawing from its global roadmap series.

  19. Technology Roadmap: Wind Energy. 2013 edition

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-07-01

    The IEA Wind Power Technology Roadmap 2013 Edition recognises the very significant progress made since the first edition was published in 2009. The technology continues to improve rapidly, and costs of generation from land-based wind installations continue to fall. Wind power is now being deployed in countries with good resources without any dedicated financial incentives. The 2013 Edition targets an increased share (15% to 18%) of global electricity to be provided by wind power in 2050, compared to 12% in the original roadmap of 2009. However, increasing levels of low-cost wind still require predictable, supportive regulatory environments and appropriate market designs. The challenges of integrating higher levels of variable wind power into the grid need to be addressed. For offshore wind, much remains to be done to develop appropriate large-scale systems and to reduce costs. The 2013 Wind Power Roadmap also provides updated analysis on the barriers that exist for the technology and suggests ways to address them, including legal and regulatory recommendations.

  20. Open Technology Development: Roadmap Plan

    National Research Council Canada - National Science Library

    Herz, J. C; Lucas, Mark; Scott, John

    2006-01-01

    .... Collaborative and distributed online tools; and 4. Technological Agility. Open standards and interfaces were initially established through ARPA and distributed via open source software reference implementations...

  1. A Roadmap for Strategic Development of Geothermal Exploration Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Phillips, Benjamin R. [SRA International Inc. and Geothermal Technologies Office, Washington, DC (United States); Ziagos, John [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Thorsteinsson, Hildigunnur [Geothermal Technologies Office, Washington, DC (United States); Hass, Eric [Geothermal Technologies Office, Golden, CO (United States)

    2013-02-13

    Characterizing productive geothermal systems is challenging yet critical to identify and develop an estimated 30 gigawatts electric (GWe) of undiscovered hydrothermal resources in the western U.S. This paper, undertaken by the U.S. Department of Energy’s Geothermal Technologies Office (GTO), summarizes needs and technical pathways that target the key geothermal signatures of temperature, permeability, and fluid content, and develops the time evolution of these pathways, tying in past and current GTO exploration Research and Development (R&D) projects. Beginning on a five-year timescale and projecting out to 2030, the paper assesses technologies that could accelerate the confirmation of 30 GWe. The resulting structure forms the basis for a Geothermal Exploration Technologies Roadmap, a strategic development plan to help guide GTO R&D investments that will lower the risk and cost of geothermal prospect identification. This roadmap is currently open for public comment. Send your comments to geothermal@ee.doe.gov.

  2. Railroad and locomotive technology roadmap.

    Energy Technology Data Exchange (ETDEWEB)

    Stodolsky, F.; Gaines, L.; Energy Systems

    2003-02-24

    Railroads are important to the U.S. economy. They transport freight efficiently, requiring less energy and emitting fewer pollutants than other modes of surface transportation. While the railroad industry has steadily improved its fuel efficiency--by 16% over the last decade--more can, and needs to, be done. The ability of locomotive manufacturers to conduct research into fuel efficiency and emissions reduction is limited by the small number of locomotives manufactured annually. Each year for the last five years, the two North American locomotive manufacturers--General Electric Transportation Systems and the Electro-Motive Division of General Motors--have together sold about 800 locomotives in the United States. With such a small number of units over which research costs can be spread, outside help is needed to investigate all possible ways to reduce fuel usage and emissions. Because fuel costs represent a significant portion of the total operating costs of a railroad, fuel efficiency has always been an important factor in the design of locomotives and in the operations of a railroad. However, fuel efficiency has recently become even more critical with the introduction of strict emission standards by the U.S. Environmental Protection Agency, to be implemented in stages (Tiers 0, 1, and 2) between 2000 and 2005. Some of the technologies that could be employed to meet the emission standards may negatively affect fuel economy--by as much as 10-15% when emissions are reduced to Tier 1 levels. Lowering fuel economy by that magnitude would have a serious impact on the cost to the consumer of goods shipped by rail, on the competitiveness of the railroad industry, and on this country's dependence on foreign oil. Clearly, a joint government/industry R&D program is needed to help catalyze the development of advanced technologies that will substantially reduce locomotive engine emissions while also improving train system energy efficiency. DOE convened an industry

  3. Background paper on Technology Roadmaps (TRMs)

    Energy Technology Data Exchange (ETDEWEB)

    More, E.; Phaal, R. [Institute for Manufacturing IfM, Department of Engineering, University of Cambridge, Cambridge (United Kingdom); Londo, H.M.; Wurtenberger, L.; Cameron, L.R. [ECN Policy Studies, Amsterdam (Netherlands)

    2013-04-15

    This background paper reports on the use of technology roadmaps (TRMs) related to climate change mitigation and adaptation technologies. The study is motivated by the UNFCCC Conference of the Parties (CoP) request to the Technology Executive Committee (TEC) to catalyse the development and use of TRMs as facilitative tools for action on mitigation and adaptation. Having originated in industry, TRMs are now used extensively in policy settings too, however their widespread use across sectors and by different stakeholders has resulted in a lack of understanding of their real value to help catalyse cooperation towards technological solutions to the problems presented by climate change. Consequently this background paper presents (1) an overview of different TRM methods, (2) an initial analysis of gaps and barriers in existing TRMs, and (3) a review of current TRM good practices.

  4. Technology Roadmap: Fuel Economy of Road Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-07-01

    This roadmap explores the potential improvement of existing technologies to enhance the average fuel economy of motorised vehicles; the roadmap’s vision is to achieve a 30% to 50% reduction in fuel use per kilometre from new road vehicles including 2-wheelers, LDV s and HDV s) around the world in 2030, and from the stock of all vehicles on the road by 2050. This achievement would contribute to significant reductions in GHG emissions and oil use, compared to a baseline projection. Different motorised modes are treated separately, with a focus on LDV s, HDV s and powered two-wheelers. A section on in-use fuel economy also addresses technical and nontechnical parameters that could allow fuel economy to drastically improve over the next decades. Technology cost analysis and payback time show that significant progress can be made with low or negative cost for fuel-efficient vehicles over their lifetime use. Even though the latest data analysed by the IEA for fuel economy between 2005 and 2008 showed that a gap exists in achieving the roadmap’s vision, cutting the average fuel economy of road motorised vehicles by 30% to 50% by 2030 is achievable, and the policies and technologies that could help meet this challenge are already deployed in many places around the world.

  5. Technology roadmapping for strategy and innovation charting the route to success

    CERN Document Server

    Isenmann, Ralf; Phaal, Robert

    2013-01-01

    Technology roadmapping is a core method to help companies and other organisations gain orientation for future opportunities and changes. This book is a key resource for technology roadmapping – it provides expert knowledge in four areas: To frame/embed technology roadmapping To structure the process and tasks of technology roadmapping To implement technology roadmapping into corporate strategies To link technology roadmapping to further instruments of strategic planning and corporate foresight This comprehensive survey of technology roadmapping includes papers from leading European, American and Asian experts: It provides an overview of different methods of technology roadmapping and the interactions between them It familiarises readers with the most important sub-methods It embeds/links technology roadmapping to the overall framework of management research and business studies This book, the first of a series, is unique: it aims to become the leading compendium for technology roadmapping knowledge and prac...

  6. Technology roadmap for lithium ion batteries 2030; Technologie-Roadmap Lithium-Ionen-Batterien 2030

    Energy Technology Data Exchange (ETDEWEB)

    Thielmann, Axel; Isenmann, Ralf; Wietschel, Martin [Fraunhofer-Institut fuer Systemtechnik und Innovationsforschung (ISI), Karlsruhe (Germany)

    2010-07-01

    The technology roadmap for lithium ion batteries 2030 presents a graphical representation of the cell components, cell types and cell characteristics of lithium ion batteries and their connection with the surrounding technology field from today through 2030. This is a farsighted orientation on the way into the future and an implementation of the ''Roadmap: Batterieforschung Deutschland'' of the BMBF (Federal Ministry of Education and Science). The developments in lithium ion batteries are identified through 2030 form today's expert view in battery development and neighbouring areas. (orig.)

  7. Avionics Collaborative Engineering Technology Delivery Order 0035: Secure Knowledge Management (SKM) Technology Research Roadmap - Technology Trends for Collaborative Information and Knowledge Management Research

    National Research Council Canada - National Science Library

    Moody, Russell

    2004-01-01

    ...) this SKM Technology Research Roadmap. The SKM Technology Research Roadmap provides information on the current state, trends, gaps, land research challenges associated with SKM technology research...

  8. Technology roadmapping: The integration of strategic and technology planning for competitiveness

    Energy Technology Data Exchange (ETDEWEB)

    Bray, O.H.; Garcia, M.L.

    1997-04-01

    Technology roadmapping is a form of technology planning that can help organizations deal with an increasingly competitive environment. As a DOE laboratory with R&D as a major product, Sandia must do effective technology planning to identify and develop technologies required to meet its mission. Once technology enhancements or new technologies are identified, they may be developed internally or collaboratively with external partners. For either approach, technology roadmapping is an effective tool for technology planning and coordination, which fits within a broader set of planning activities. Potential benefits of roadmapping include identifying critical technologies and gaps, coordination of research activities, and improved marketing information. Roadmapping is particularly useful when investment decisions are not straightforward and for coordinating the development of multiple technologies, especially across multiple projects. This paper formalizes and documents the technology roadmapping process. It describes the process and shows how it fits within an overall strategic and technology planning process. The technology roadmapping process consists of three phases: preliminary activity, development of the roadmap, and followup activity. Preliminary activity includes: satisfy essential conditions, provide leadership/sponsorship, and define the scope and boundaries for the roadmap. Development of the technology roadmap includes: (1) Identify the {open_quotes}product{close_quotes} that will be the focus of the roadmap. (2) Identify the critical system requirements and their targets. (3) Specify the major technology areas. (4) Specify the technology drivers and their targets. (5) Identify technology alternatives and their time lines. (6) Recommend the technology alternatives that should be pursued. (7) Create the technology roadmap report. Follow-up activity includes: (1) Critique and validate the roadmap. (2) Develop an implementation plan. (3) Review and update.

  9. Power Tower Technology Roadmap and cost reduction plan.

    Energy Technology Data Exchange (ETDEWEB)

    Mancini, Thomas R.; Gary, Jesse A. (U.S. Department of Energy); Kolb, Gregory J.; Ho, Clifford Kuofei

    2011-04-01

    Concentrating solar power (CSP) technologies continue to mature and are being deployed worldwide. Power towers will likely play an essential role in the future development of CSP due to their potential to provide dispatchable solar electricity at a low cost. This Power Tower Technology Roadmap has been developed by the U.S. Department of Energy (DOE) to describe the current technology, the improvement opportunities that exist for the technology, and the specific activities needed to reach the DOE programmatic target of providing competitively-priced electricity in the intermediate and baseload power markets by 2020. As a first step in developing this roadmap, a Power Tower Roadmap Workshop that included the tower industry, national laboratories, and DOE was held in March 2010. A number of technology improvement opportunities (TIOs) were identified at this workshop and separated into four categories associated with power tower subsystems: solar collector field, solar receiver, thermal energy storage, and power block/balance of plant. In this roadmap, the TIOs associated with power tower technologies are identified along with their respective impacts on the cost of delivered electricity. In addition, development timelines and estimated budgets to achieve cost reduction goals are presented. The roadmap does not present a single path for achieving these goals, but rather provides a process for evaluating a set of options from which DOE and industry can select to accelerate power tower R&D, cost reductions, and commercial deployment.

  10. The 2017 Plasma Roadmap: Low temperature plasma science and technology

    Science.gov (United States)

    Adamovich, I.; Baalrud, S. D.; Bogaerts, A.; Bruggeman, P. J.; Cappelli, M.; Colombo, V.; Czarnetzki, U.; Ebert, U.; Eden, J. G.; Favia, P.; Graves, D. B.; Hamaguchi, S.; Hieftje, G.; Hori, M.; Kaganovich, I. D.; Kortshagen, U.; Kushner, M. J.; Mason, N. J.; Mazouffre, S.; Mededovic Thagard, S.; Metelmann, H.-R.; Mizuno, A.; Moreau, E.; Murphy, A. B.; Niemira, B. A.; Oehrlein, G. S.; Petrovic, Z. Lj; Pitchford, L. C.; Pu, Y.-K.; Rauf, S.; Sakai, O.; Samukawa, S.; Starikovskaia, S.; Tennyson, J.; Terashima, K.; Turner, M. M.; van de Sanden, M. C. M.; Vardelle, A.

    2017-08-01

    Journal of Physics D: Applied Physics published the first Plasma Roadmap in 2012 consisting of the individual perspectives of 16 leading experts in the various sub-fields of low temperature plasma science and technology. The 2017 Plasma Roadmap is the first update of a planned series of periodic updates of the Plasma Roadmap. The continuously growing interdisciplinary nature of the low temperature plasma field and its equally broad range of applications are making it increasingly difficult to identify major challenges that encompass all of the many sub-fields and applications. This intellectual diversity is ultimately a strength of the field. The current state of the art for the 19 sub-fields addressed in this roadmap demonstrates the enviable track record of the low temperature plasma field in the development of plasmas as an enabling technology for a vast range of technologies that underpin our modern society. At the same time, the many important scientific and technological challenges shared in this roadmap show that the path forward is not only scientifically rich but has the potential to make wide and far reaching contributions to many societal challenges.

  11. A Lunar Surface System Supportability Technology Development Roadmap

    Science.gov (United States)

    Oeftering, Richard C.; Struk, Peter M.; Taleghani, barmac K.

    2011-01-01

    This paper discusses the establishment of a Supportability Technology Development Roadmap as a guide for developing capabilities intended to allow NASA s Constellation program to enable a supportable, sustainable and affordable exploration of the Moon and Mars. Presented is a discussion of supportability, in terms of space facility maintenance, repair and related logistics and a comparison of how lunar outpost supportability differs from the International Space Station. Supportability lessons learned from NASA and Department of Defense experience and their impact on a future lunar outpost is discussed. A supportability concept for future missions to the Moon and Mars that involves a transition from a highly logistics dependent to a logistically independent operation is discussed. Lunar outpost supportability capability needs are summarized and a supportability technology development strategy is established. The resulting Lunar Surface Systems Supportability Strategy defines general criteria that will be used to select technologies that will enable future flight crews to act effectively to respond to problems and exploit opportunities in an environment of extreme resource scarcity and isolation. This strategy also introduces the concept of exploiting flight hardware as a supportability resource. The technology roadmap involves development of three mutually supporting technology categories, Diagnostics Test and Verification, Maintenance and Repair, and Scavenging and Recycling. The technology roadmap establishes two distinct technology types, "Embedded" and "Process" technologies, with different implementation and thus different criteria and development approaches. The supportability technology roadmap addresses the technology readiness level, and estimated development schedule for technology groups that includes down-selection decision gates that correlate with the lunar program milestones. The resulting supportability technology roadmap is intended to develop a set

  12. Technology Roadmaps: A guide to development and implementation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    New low-carbon technologies show clear potential for transforming the global energy system, but a key challenge remains: what steps do governments and industry need to take to ensure their development and deployment? Roadmapping, used for decades in technology-intensive industries, is a useful tool to help address complicated issues strategically at the national, regional and global levels. To help turn political statements and analytical work into concrete action, the International Energy Agency (IEA) is developing a series of global roadmaps devoted to low-carbon energy technologies. This guide is aimed at providing countries and companies with the context, information and tools they need to design, manage and implement an effective energy roadmap process.

  13. Technology Roadmaps: Solar Heating and Cooling

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-07-01

    The solar heating and cooling (SHC) roadmap outlines a pathway for solar energy to supply almost one sixth (18 EJ) of the world’s total energy use for both heating and cooling by 2050. This would save some 800 megatonnes of carbon dioxide (CO2) emissions per year; more than the total CO2 emissions in Germany in 2009. While solar heating and cooling today makes a modest contribution to world energy demand, the roadmap envisages that if concerted action is taken by governments and industry, solar energy could annually produce more than 16% of total final energy use for low temperature heat and nearly 17% for cooling. Given that global energy demand for heat represents almost half of the world’s final energy use – more than the combined global demand for electricity and transport – solar heat can make a significant contribution in both tackling climate change and strengthening energy security.

  14. Technology Roadmaps: Solar Heating and Cooling

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-09-06

    The solar heating and cooling (SHC) roadmap outlines a pathway for solar energy to supply almost one sixth (18 EJ) of the world's total energy use for both heating and cooling by 2050. This would save some 800 megatonnes of carbon dioxide (CO2) emissions per year; more than the total CO2 emissions in Germany in 2009. While solar heating and cooling today makes a modest contribution to world energy demand, the roadmap envisages that if concerted action is taken by governments and industry, solar energy could annually produce more than 16% of total final energy use for low temperature heat and nearly 17% for cooling. Given that global energy demand for heat represents almost half of the world's final energy use -- more than the combined global demand for electricity and transport -- solar heat can make a significant contribution in both tackling climate change and strengthening energy security.

  15. Technology Roadmapping for Renewable Fuels: Case of Biobutanol in Brazil

    Directory of Open Access Journals (Sweden)

    Julio Cesar Natalense

    2013-12-01

    Interviews have been used in the roadmapping process as an alternative to the workshops on market, product and technology. It allows the participation of companies in a highly competitive environment. The use of interviews allows the information to be collected individually, contributing to the elaboration of a roadmap. The results show that sugar cane has the potential to be used as a feedstock in the biobutanol production process, enabling Brazil to become a key exporter to supply other countries. For the short future, biobutanol has the potential to be produced in Brazil to replace petro-butanol as a solvent in industrial applications and to build the export platform for the fuels market .

  16. Technology Roadmaps: Carbon Capture and Storage

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    Carbon capture and storage (CCS) is an important part of the lowest-cost greenhouse gas (GHG) mitigation portfolio. IEA analysis suggests that without CCS, overall costs to reduce emissions to 2005 levels by 2050 increase by 70%. This roadmap includes an ambitious CCS growth path in order to achieve this GHG mitigation potential, envisioning 100 projects globally by 2020 and over 3000 projects by 2050. This roadmap's level of project development requires an additional investment of over USD 2.5-3 trillion from 2010 to 2050, which is about 6% of the overall investment needed to achieve a 50% reduction in GHG emissions by 2050. OECD governments will need to increase funding for CCS demonstration projects to an average annual level of USD 3.5 to 4 billion (bn) from 2010 to 2020. In addition, mechanisms need to be established to incentivise commercialisation beyond 2020 in the form of mandates, GHG reduction incentives, tax rebates or other financing mechanisms.

  17. Technology Roadmap: Carbon Capture and Storage

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-08-01

    As long as fossil fuels and carbon-intensive industries play dominant roles in our economies, carbon capture and storage (CCS) will remain a critical greenhouse gas reduction solution. This CCS roadmap aims at assisting governments and industry in integrating CCS in their emissions reduction strategies and in creating the conditions for scaled-up deployment of all three components of the CCS chain: CO2 capture, transport and storage. To get us onto the right pathway, this roadmap highlights seven key actions needed in the next seven years to create a solid foundation for deployment of CCS starting by 2020. IEA analysis shows that CCS is an integral part of any lowest-cost mitigation scenario where long-term global average temperature increases are limited to significantly less than 4 °C, particularly for 2 °C scenarios (2DS). In the 2DS, CCS is widely deployed in both power generation and industrial applications. The total CO2 capture and storage rate must grow from the tens of megatonnes of CO2 captured in 2013 to thousands of megatonnes of CO2 in 2050 in order to address the emissions reduction challenge. A total cumulative mass of approximately 120 GtCO2 would need to be captured and stored between 2015 and 2050, across all regions of the globe.

  18. Technology Development Roadmap: A Technology Development Roadmap for a Future Gravitational Wave Mission

    Science.gov (United States)

    Camp, Jordan; Conklin, John; Livas, Jeffrey; Klipstein, William; McKenzie, Kirk; Mueller, Guido; Mueller, Juergen; Thorpe, James Ira; Arsenovic, Peter; Baker, John; hide

    2013-01-01

    Humankind will detect the first gravitational wave (GW) signals from the Universe in the current decade using ground-based detectors. But the richest trove of astrophysical information lies at lower frequencies in the spectrum only accessible from space. Signals are expected from merging massive black holes throughout cosmic history, from compact stellar remnants orbiting central galactic engines from thousands of close contact binary systems in the Milky Way, and possibly from exotic sources, some not yet imagined. These signals carry essential information not available from electromagnetic observations, and which can be extracted with extraordinary accuracy. For 20 years, NASA, the European Space Agency (ESA), and an international research community have put considerable effort into developing concepts and technologies for a GW mission. Both the 2000 and 2010 decadal surveys endorsed the science and mission concept of the Laser Interferometer Space Antenna (LISA). A partnership of the two agencies defined and analyzed the concept for a decade. The agencies partnered on LISA Pathfinder (LPF), and ESA-led technology demonstration mission, now preparing for a 2015 launch. Extensive technology development has been carried out on the ground. Currently, the evolved Laser Interferometer Space Antenna (eLISA) concept, a LISA-like concept with only two measurement arms, is competing for ESA's L2 opportunity. NASA's Astrophysics Division seeks to be a junior partner if eLISA is selected. If eLISA is not selected, then a LISA-like mission will be a strong contender in the 2020 decadal survey. This Technology Development Roadmap (TDR) builds on the LISA concept development, the LPF technology development, and the U.S. and European ground-based technology development. The eLISA architecture and the architecture of the Mid-sized Space-based Gravitational-wave Observatory (SGO Mid)-a competitive design with three measurement arms from the recent design study for a NASA

  19. A Technology Roadmap for Strategic Development of Enhanced Geothermal Systems

    Energy Technology Data Exchange (ETDEWEB)

    Ziagos, John [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Phillips, Benjamin R. [SRA International, Inc. and Geothermal Technologies Office, Washington, DC (United States); Boyd, Lauren [Geothermal Technologies Office, Washington, DC (United States); Jelacic, Allan [SRA International, Inc., Washington, DC (United States); Stillman, Greg [Geothermal Technologies Office, Washington, DC (United States); Hass, Eric [U.S. DOE, Golden, CO (United States)

    2013-02-13

    Realization of EGS development would make geothermal a significant contender in the renewable energy portfolio, on the order of 100+ GWe in the United States alone. While up to 90% of the geothermal power resource in the United States is thought to reside in Enhanced Geothermal Systems (EGS), hurdles to commercial development still remain. The Geothermal Technologies Office, U.S. Department of Energy (DOE), began in 2011 to outline opportunities for advancing EGS technologies on five- to 20-year timescales, with community input on the underlying technology needs that will guide research and ultimately determine commercial success for EGS. This report traces DOE's research investments, past and present, and ties them to these technology needs, forming the basis for an EGS Technology Roadmap to help guide future DOE research. This roadmap is currently open for public comment. Send your comments to geothermal@ee.doe.gov.

  20. Technology Road-map Update for Generation IV Nuclear Energy Systems

    International Nuclear Information System (INIS)

    2014-01-01

    This Technology Road-map Update provides an assessment of progress made by the Generation IV International Forum (GIF) in the development of the six systems selected when the original Technology Road-map was published in 2002. More importantly, it provides an overview of the major R and D objectives and milestones for the coming decade, aiming to achieve the Generation IV goals of sustainability, safety and reliability, economic competitiveness, proliferation resistance and physical protection. Lessons learnt from the Fukushima Daiichi nuclear power plant accident are taken into account to ensure that Generation IV systems attain the highest levels of safety, with the development of specific safety design criteria that are applicable across the six systems. Accomplishing the ten-year R and D objectives set out in this new Road-map should allow the more advanced Generation IV systems to move towards the demonstration phase. (authors)

  1. 'Mini'-Roadmapping - Ensuring Timely Sites' Cleanup/Closure by Resolving Science and Technology Issues

    International Nuclear Information System (INIS)

    Luke, D.E.; Dixon, B.W.; Murphy, J.A.

    2003-01-01

    Roadmapping is a powerful tool to manage technical risks and opportunities associated with complex problems. Roadmapping identifies technical capabilities required for both project- and program-level efforts and provides the basis for plans that ensure the necessary enabling activities will be done when needed. Roadmapping reveals where to focus further development of the path forward by evaluating uncertainties for levels of complexity, impacts, and/or the potential for large payback. Roadmaps can be customized to the application, a ''graded approach'' if you will. Some roadmaps are less detailed. We have called these less detailed, top-level roadmaps ''mini-roadmaps''. These mini roadmaps are created to tie the needed enablers (e.g., technologies, decisions, etc.) to the functions. If it is found during the mini-roadmapping that areas of significant risk exist, then those can be roadmapped further to a lower level of detail. Otherwise, the mini-roadmap may be sufficient to manage the project/program risk. Applying a graded approach to the roadmapping can help keep the costs down. Experience has indicated that it is best to do mini-roadmapping first and then evaluate the risky areas to determine whether to further evaluate those areas. Roadmapping can be especially useful for programs/projects that have participants from multiple sites, programs, or other entities which are involved. Increased synergy, better communications, and increased cooperation are the results from roadmapping a program/project with these conditions

  2. The future of technology enhanced active learning – a roadmap

    OpenAIRE

    Pahl, Claus; Kenny, Claire

    2008-01-01

    The notion of active learning refers to the active involvement of learner in the learning process, capturing ideas of learning-by-doing and the fact that active participation and knowledge construction leads to deeper and more sustained learning. Interactivity, in particular learnercontent interaction, is a central aspect of technology-enhanced active learning. In this roadmap, the pedagogical background is discussed, the essential dimensions of technology-enhanced active learning syste...

  3. Technology Roadmap for Energy Reduction in Automotive Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2008-09-01

    U.S. Department of Energy’s (DOE) Industrial Technologies Program (ITP), in collaboration with the United States Council for Automotive Research LLC (USCAR), hosted a technology roadmap workshop in Troy, Michigan in May 2008. The purpose of the workshop was to explore opportunities for energy reduction, discuss the challenges and barriers that might need to be overcome, and identify priorities for future R&D. The results of the workshop are presented in this report.

  4. Synthesizing R&D Data: Experiences from the Integrated Manufacturing Technology Roadmap (IMTR) Project

    Energy Technology Data Exchange (ETDEWEB)

    merrell, m.a.

    1999-05-05

    IMTR is a tremendous undertaking to assess the current state and future needs of Manufacturing Technology R&D. A follow-on project to the roadmaps is the development and populating of a Gap Analysis database containing current R&D abstracts related to the roadmaps' technical elements. Efficiently identifying the R&D projects within scope presents many travails of synthesizing data from across a wide spectrum. Challenges to this project were directly proportional to the lack of single-source data collections.

  5. Technology Roadmaps: Carbon Capture and Storage in Industrial Applications

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    A new technology roadmap on Carbon Capture and Storage in Industrial Applications, released today in Beijing, shows that carbon capture and storage (CCS) has the potential to reduce CO2 emissions from industrial applications by 4 gigatonnes in 2050. Such an amount is equal to roughly one-tenth of the total emission cuts needed from the energy sector by the middle of the century. This requires a rapid deployment of CCS technologies in various industrial sectors, and across both OECD and non-OECD countries. The roadmap, a joint report from the International Energy Agency (IEA) and the United Nations Industrial Development Organization (UNIDO), says that over 1800 industrial-scale projects are required over the next 40 years.

  6. Technology Roadmaps: Energy-efficient Buildings: Heating and Cooling Equipment

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    Buildings account for almost a third of final energy consumption globally and are an equally important source of CO2 emissions. Currently, both space heating and cooling as well as hot water are estimated to account for roughly half of global energy consumption in buildings. Energy-efficient and low/zero-carbon heating and cooling technologies for buildings have the potential to reduce CO2 emissions by up to 2 gigatonnes (Gt) and save 710 million tonnes oil equivalent (Mtoe) of energy by 2050. Most of these technologies -- which include solar thermal, combined heat and power (CHP), heat pumps and thermal energy storage -- are commercially available today. The Energy-Efficient Buildings: Heating and Cooling Equipment Roadmap sets out a detailed pathway for the evolution and deployment of the key underlying technologies. It finds that urgent action is required if the building stock of the future is to consume less energy and result in lower CO2 emissions. The roadmap concludes with a set of near-term actions that stakeholders will need to take to achieve the roadmap's vision.

  7. NASA Technology Area 07: Human Exploration Destination Systems Roadmap

    Science.gov (United States)

    Kennedy, Kriss J.; Alexander, Leslie; Landis, Rob; Linne, Diane; Mclemore, Carole; Santiago-Maldonado, Edgardo; Brown, David L.

    2011-01-01

    This paper gives an overview of the National Aeronautics and Space Administration (NASA) Office of Chief Technologist (OCT) led Space Technology Roadmap definition efforts. This paper will given an executive summary of the technology area 07 (TA07) Human Exploration Destination Systems (HEDS). These are draft roadmaps being reviewed and updated by the National Research Council. Deep-space human exploration missions will require many game changing technologies to enable safe missions, become more independent, and enable intelligent autonomous operations and take advantage of the local resources to become self-sufficient thereby meeting the goal of sustained human presence in space. Taking advantage of in-situ resources enhances and enables revolutionary robotic and human missions beyond the traditional mission architectures and launch vehicle capabilities. Mobility systems will include in-space flying, surface roving, and Extra-vehicular Activity/Extravehicular Robotics (EVA/EVR) mobility. These push missions will take advantage of sustainability and supportability technologies that will allow mission independence to conduct human mission operations either on or near the Earth, in deep space, in the vicinity of Mars, or on the Martian surface while opening up commercialization opportunities in low Earth orbit (LEO) for research, industrial development, academia, and entertainment space industries. The Human Exploration Destination Systems (HEDS) Technology Area (TA) 7 Team has been chartered by the Office of the Chief Technologist (OCT) to strategically roadmap technology investments that will enable sustained human exploration and support NASA s missions and goals for at least the next 25 years. HEDS technologies will enable a sustained human presence for exploring destinations such as remote sites on Earth and beyond including, but not limited to, LaGrange points, low Earth orbit (LEO), high Earth orbit (HEO), geosynchronous orbit (GEO), the Moon, near

  8. Technology Roadmap: Lab-on-a-Chip

    OpenAIRE

    Pattharaporn Suntharasaj; Tugrul U Daim

    2010-01-01

    With the integration of microfluidic and MEMS technologies, biochips such as the lab-on-a-chip (LOC) devices are at the brink of revolutionizing the medical disease diagnostics industries. Remarkable advancements in the biochips industry are making products resembling Star Trek.s "tricorder" and handheld medical scanners a reality. Soon, doctors can screen for cancer at the molecular level without costly and cumbersome equipments, and discuss treatment plans based on immediate lab results. Th...

  9. A roadmap for nuclear energy technology

    Science.gov (United States)

    Sofu, Tanju

    2018-01-01

    The prospects for the future use of nuclear energy worldwide can best be understood within the context of global population growth, urbanization, rising energy need and associated pollution concerns. As the world continues to urbanize, sustainable development challenges are expected to be concentrated in cities of the lower-middle-income countries where the pace of urbanization is fastest. As these countries continue their trajectory of economic development, their energy need will also outpace their population growth adding to the increased demand for electricity. OECD IEA's energy system deployment pathway foresees doubling of the current global nuclear capacity by 2050 to reduce the impact of rapid urbanization. The pending "retirement cliff" of the existing U.S. nuclear fleet, representing over 60 percent of the nation's emission-free electricity, also poses a large economic and environmental challenge. To meet the challenge, the U.S. DOE has developed the vision and strategy for development and deployment of advanced reactors. As part of that vision, the U.S. government pursues programs that aim to expand the use of nuclear power by supporting sustainability of the existing nuclear fleet, deploying new water-cooled large and small modular reactors to enable nuclear energy to help meet the energy security and climate change goals, conducting R&D for advanced reactor technologies with alternative coolants, and developing sustainable nuclear fuel cycle strategies. Since the current path relying heavily on water-cooled reactors and "once-through" fuel cycle is not sustainable, next generation nuclear energy systems under consideration aim for significant advances over existing and evolutionary water-cooled reactors. Among the spectrum of advanced reactor options, closed-fuel-cycle systems using reactors with fast-neutron spectrum to meet the sustainability goals offer the most attractive alternatives. However, unless the new public-private partnership models emerge

  10. Science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems

    DEFF Research Database (Denmark)

    Ferrari, Andrea C.; Bonaccorso, Francesco; Falko, Vladimir

    2015-01-01

    We present the science and technology roadmap (STR) for graphene, related twodimensional (2d) crystals, and hybrid systems, targeting an evolution in technology, that might lead to impacts and benefits reaching into most areas of society. The roadmap was developed within the framework of the Euro...

  11. Ground-based Nuclear Detonation Detection (GNDD) Technology Roadmap

    International Nuclear Information System (INIS)

    Casey, Leslie A.

    2014-01-01

    This GNDD Technology Roadmap is intended to provide guidance to potential researchers and help management define research priorities to achieve technology advancements for ground-based nuclear explosion monitoring science being pursued by the Ground-based Nuclear Detonation Detection (GNDD) Team within the Office of Nuclear Detonation Detection in the National Nuclear Security Administration (NNSA) of the U.S. Department of Energy (DOE). Four science-based elements were selected to encompass the entire scope of nuclear monitoring research and development (R&D) necessary to facilitate breakthrough scientific results, as well as deliver impactful products. Promising future R&D is delineated including dual use associated with the Comprehensive Nuclear-Test-Ban Treaty (CTBT). Important research themes as well as associated metrics are identified along with a progression of accomplishments, represented by a selected bibliography, that are precursors to major improvements to nuclear explosion monitoring.

  12. Ground-based Nuclear Detonation Detection (GNDD) Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Casey, Leslie A.

    2014-01-13

    This GNDD Technology Roadmap is intended to provide guidance to potential researchers and help management define research priorities to achieve technology advancements for ground-based nuclear explosion monitoring science being pursued by the Ground-based Nuclear Detonation Detection (GNDD) Team within the Office of Nuclear Detonation Detection in the National Nuclear Security Administration (NNSA) of the U.S. Department of Energy (DOE). Four science-based elements were selected to encompass the entire scope of nuclear monitoring research and development (R&D) necessary to facilitate breakthrough scientific results, as well as deliver impactful products. Promising future R&D is delineated including dual use associated with the Comprehensive Nuclear-Test-Ban Treaty (CTBT). Important research themes as well as associated metrics are identified along with a progression of accomplishments, represented by a selected bibliography, that are precursors to major improvements to nuclear explosion monitoring.

  13. Mission to the Solar System: Exploration and Discovery. A Mission and Technology Roadmap

    Science.gov (United States)

    Gulkis, S. (Editor); Stetson, D. S. (Editor); Stofan, E. R. (Editor)

    1998-01-01

    Solar System exploration addresses some of humanity's most fundamental questions: How and when did life form on Earth? Does life exist elsewhere in the Solar System or in the Universe? - How did the Solar System form and evolve in time? - What can the other planets teach us about the Earth? This document describes a Mission and Technology Roadmap for addressing these and other fundamental Solar System Questions. A Roadmap Development Team of scientists, engineers, educators, and technologists worked to define the next evolutionary steps in in situ exploration, sample return, and completion of the overall Solar System survey. Guidelines were to "develop aa visionary, but affordable, mission and technology development Roadmap for the exploration of the Solar System in the 2000 to 2012 timeframe." The Roadmap provides a catalog of potential flight missions. (Supporting research and technology, ground-based observations, and laboratory research, which are no less important than flight missions, are not included in this Roadmap.)

  14. Technology Road-map - Nuclear Energy. 2015 edition

    International Nuclear Information System (INIS)

    Houssin, Didier; Dujardin, Thierry; Cameron, Ron; Tam, Cecilia; Paillere, Henri; Baroni, Marco; Bromhead, Amos; Baritaud, Manual; Cometto, Marco; Gaghen, Rebecca; Herzog, Antoine; Remme, Uwe; Urso, Maria-Elena; Vance, Robert

    2015-01-01

    Since the release in 2010 of Technology Road-map: Nuclear Energy (IEA/NEA, 2010), a number of events have had a significant impact on the global energy sector and on the outlook for nuclear energy. They include the Fukushima Daiichi nuclear power plant (NPP) accident in March 2011, the global financial and economic crises that hit many industrialised countries during the period 2008-10 and failings in both electricity and CO 2 markets. Despite these additional challenges, nuclear energy still remains a proven low-carbon source of base-load electricity, and many countries have reaffirmed the importance of nuclear energy within their countries' energy strategies. To achieve the goal of limiting global temperature increases to just 2 deg. C by the end of the century, a halving of global energy-related emissions by 2050 will be needed. A wide range of low-carbon energy technologies will be needed to support this transition, including nuclear energy. This edition of the nuclear road-map prepared jointly by the IEA and NEA take into account recent challenges facing the development of this technology. The 2015 edition of the Nuclear Energy Technology Road-map aims to: Outline the current status of nuclear technology development and the need for additional R and D to address increased safety requirements and improved economics. Provide an updated vision of the role that nuclear energy could play in a low-carbon energy system, taking into account changes in nuclear policy in various countries, as well as the current economics of nuclear and other low-carbon electricity technologies. Identify barriers and actions needed to accelerate the development of nuclear technologies to meet the Road-map vision. Share lessons learnt and good practices in nuclear safety and regulation, front- and back-end fuel cycle practices, construction, decommissioning, financing, training, capacity building and communication. Key findings: Nuclear power is the largest source of low

  15. A 21st century roadmap for human health risk assessment.

    Science.gov (United States)

    Pastoor, Timothy P; Bachman, Ammie N; Bell, David R; Cohen, Samuel M; Dellarco, Michael; Dewhurst, Ian C; Doe, John E; Doerrer, Nancy G; Embry, Michelle R; Hines, Ronald N; Moretto, Angelo; Phillips, Richard D; Rowlands, J Craig; Tanir, Jennifer Y; Wolf, Douglas C; Boobis, Alan R

    2014-08-01

    The Health and Environmental Sciences Institute (HESI)-coordinated Risk Assessment in the 21st Century (RISK21) project was initiated to develop a scientific, transparent, and efficient approach to the evolving world of human health risk assessment, and involved over 120 participants from 12 countries, 15 government institutions, 20 universities, 2 non-governmental organizations, and 12 corporations. This paper provides a brief overview of the tiered RISK21 framework called the roadmap and risk visualization matrix, and articulates the core principles derived by RISK21 participants that guided its development. Subsequent papers describe the roadmap and matrix in greater detail. RISK21 principles include focusing on problem formulation, utilizing existing information, starting with exposure assessment (rather than toxicity), and using a tiered process for data development. Bringing estimates of exposure and toxicity together on a two-dimensional matrix provides a clear rendition of human safety and risk. The value of the roadmap is its capacity to chronicle the stepwise acquisition of scientific information and display it in a clear and concise fashion. Furthermore, the tiered approach and transparent display of information will contribute to greater efficiencies by calling for data only as needed (enough precision to make a decision), thus conserving animals and other resources.

  16. Approach to technology prioritization in support of moon initiatives in the framework of ESA exploration technology roadmaps

    Science.gov (United States)

    Aleina, Sara Cresto; Viola, Nicole; Fusaro, Roberta; Saccoccia, Giorgio

    2017-10-01

    Exploration technology roadmaps have been developed by ESA in the past few years and the latest edition has been released in 2015. Scope of these technology roadmaps, elaborated in consultation with the different ESA stakeholders (e.g. European Industries and Research Entities), is to provide a powerful tool for strategic, programmatic and technical decisions in support of the European role within an International Space Exploration context. In the context of preparation for possible future European Moon exploration initiatives, the technology roadmaps have been used to highlight the role of technology within Missions, Building Blocks and Operational Capabilities of relevance. In particular, as part of reference missions to the Moon that would fit in the time frame 2020 to 2030, ESA has addressed the definition of lunar surface exploration missions in line with its space exploration strategy, with the common mission goals of returning samples from the Moon and Mars and expanding human presence to these destinations in a step-wise approach. The roadmaps for the procurement of technologies required for the first mission elements of the above strategy have been elaborated through their main building blocks, i.e. Visual navigation, Hazard detection and avoidance; Sample acquisition, processing and containment system; Surface mobility elements; Tele-robotic and autonomous control systems; and Storable propulsion modules and equipment. Technology prioritization methodologies have been developed in support of the ESA Exploration Technology Roadmaps, in order to provide logical and quantitative instruments to verify choices of prioritization that can be carried out based on important, but non-quantitative factors. These methodologies, which are thoroughly described in the first part of the paper, proceed through subsequent steps. First, technology prioritization's criteria are selected; then decision trees are developed to highlight all feasible paths of combination of

  17. Designing Program Roadmaps to Catalyze Community Formation: A Case Study of the Long-Term Stewardship Science and Technology Roadmapword

    International Nuclear Information System (INIS)

    Dixon, Brent; Hanson, Duane; Matthern, Gretchen

    2003-01-01

    A number of broad perspective technology roadmaps have been developed in the last few years as tools for coordinating nation-wide research in targeted areas. These roadmaps share a common characteristic of coalescing the associated stakeholder groups into a special-interest community that is willing to work cooperatively in achieving the roadmap goals. These communities are key to roadmap implementation as they provide the collaborative energy necessary to obtain the political support and funding required for identified science and technology development efforts. This paper discusses the relationship between roadmaps and special-interest communities, using the recently drafted Department of Energy's Long-Term Stewardship Science and Technology Roadmap as a case study. Specific aspects this roadmap's design facilitated the development of a long-term stewardship community while specific realities during roadmap development impacted the realization of the design

  18. Designing Program Roadmaps to Catalyze Community Formation: A Case Study of the Long-Term Stewardship Science and Technology Roadmapword

    Energy Technology Data Exchange (ETDEWEB)

    Dixon, Brent; Hanson, Duane; Matthern, Gretchen

    2003-02-27

    A number of broad perspective technology roadmaps have been developed in the last few years as tools for coordinating nation-wide research in targeted areas. These roadmaps share a common characteristic of coalescing the associated stakeholder groups into a special-interest community that is willing to work cooperatively in achieving the roadmap goals. These communities are key to roadmap implementation as they provide the collaborative energy necessary to obtain the political support and funding required for identified science and technology development efforts. This paper discusses the relationship between roadmaps and special-interest communities, using the recently drafted Department of Energy's Long-Term Stewardship Science and Technology Roadmap as a case study. Specific aspects this roadmap's design facilitated the development of a long-term stewardship community while specific realities during roadmap development impacted the realization of the design.

  19. Exploration and Mining Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2002-09-01

    This Exploration and Mining Technology Roadmap represents the third roadmap for the Mining Industry of the Future. It is based upon the results of the Exploration and Mining Roadmap Workshop held May 10 ñ 11, 2001.

  20. Technology Roadmap Research Program for the Steel Industry

    Energy Technology Data Exchange (ETDEWEB)

    Joseph R. Vehec

    2010-12-30

    The steel industry's Technology Roadmap Program (TRP) is a collaborative R&D effort jointly sponsored by the steel industry and the United States Department of Energy. The TRP program was designed to develop new technologies to save energy , increase competitiveness, and improve the environment. TRP ran from July, 1997 to December, 2008, with a total program budget of $38 million dollars. During that period 47 R&D projects were performed by 28 unique research organizations; co-funding was provided by DOE and 60 industry partners. The projects benefited all areas of steelmaking and much know-how was developed and transferred to industry. The American Iron and Steel Institute is the owner of all intellectual property developed under TRP and licenses it at commercial rates to all steelmakers. TRP technologies are in widespread use in the steel industry as participants received royalty-free use of intellectual property in return for taking the risk of funding this research.

  1. Science and Technology Test Mining: Disruptive Technology Roadmaps

    Science.gov (United States)

    2003-07-23

    2330, 2002. This paper discusses how peer-to-peer computing is emerging as a disruptive technology for global collaborative solutions. It explains how...8217brand image’ of nation-states on a global plane. The article critiques the notion that new media, especially the internet, are disruptive technologies ...advantage over potential adversaries. The widespread access to a wide variety of modern top of the fine technologies made possible by the globalization of

  2. PVT roadmap. A European guide for the development and market introduction of PVT technology

    Energy Technology Data Exchange (ETDEWEB)

    Zondag, H.A.; Van Helden, W.G.J.; Bakker, M. [ECN Renewable Energy in the Built Environment DEGO, Petten (Netherlands); Affolter, P. [Solstis, Lausanne (Switzerland); Eisenmann, W. [Institut fuer Solarenergieforschung ISFH, Emmerthal (Germany); Fechner, H. [Arsenal Research, Vienna (Austria); Rommel, M. [Fraunhofer ISE, Freiburg (Germany); Schaap, A. [Ecofys, Utrecht (Netherlands); Soerensen, H. [Esbensen, Copenhagen (Denmark); Tripanagnostopoulos, Y. [University of Patras, Patras (Greece)

    2006-06-15

    The aim of the roadmap is to identify promising markets for PVT (PhotoVoltaic Thermal) technology , and to identify the economical, policy, legislative and technical bottlenecks. In addition, the roadmap wants to inform the parties in the market on PVT. It thereby targets a broad range of professionals, including policy makers, solar manufacturers, installers and researchers. This work has been carried out within the PVT forum project, which is part of the EU-supported project PV-Catapult. The aim of PVT Forum is to lay the foundations for a large-scale introduction of PVT technology in Europe by means of this roadmap. In order to construct the roadmap, a two-step approach was taken. As a first step, PVT experts, PV and solar thermal industries and other stakeholders were brought together in two workshops, connected to the PVSEC 2004 in Paris and the Eurosun conference 2004 in Freiburg, to identify drivers and barriers for PVT. The results of these two workshops, that were presented in two workshop reports, were used as input for the roadmap presented here. As a second step, the PVT roadmap was written, formulating the necessary actions that should be taken on short, medium and long term in order to enlarge the market for PVT products. The chapters of the roadmap are written and reviewed by the various participants in PVT Forum. These participants have been selected for this project on the basis of their contribution to PVT development over the last years.

  3. PVT roadmap. A European guide for the development and market introduction of PVT technology

    International Nuclear Information System (INIS)

    Zondag, H.A.; Van Helden, W.G.J.; Bakker, M.; Affolter, P.; Eisenmann, W.; Fechner, H.; Rommel, M.; Schaap, A.; Soerensen, H.; Tripanagnostopoulos, Y.

    2006-06-01

    The aim of the roadmap is to identify promising markets for PVT (PhotoVoltaic Thermal) technology , and to identify the economical, policy, legislative and technical bottlenecks. In addition, the roadmap wants to inform the parties in the market on PVT. It thereby targets a broad range of professionals, including policy makers, solar manufacturers, installers and researchers. This work has been carried out within the PVT forum project, which is part of the EU-supported project PV-Catapult. The aim of PVT Forum is to lay the foundations for a large-scale introduction of PVT technology in Europe by means of this roadmap. In order to construct the roadmap, a two-step approach was taken. As a first step, PVT experts, PV and solar thermal industries and other stakeholders were brought together in two workshops, connected to the PVSEC 2004 in Paris and the Eurosun conference 2004 in Freiburg, to identify drivers and barriers for PVT. The results of these two workshops, that were presented in two workshop reports, were used as input for the roadmap presented here. As a second step, the PVT roadmap was written, formulating the necessary actions that should be taken on short, medium and long term in order to enlarge the market for PVT products. The chapters of the roadmap are written and reviewed by the various participants in PVT Forum. These participants have been selected for this project on the basis of their contribution to PVT development over the last years

  4. Towards a nuclear energy technology roadmap. A new service to the nuclear community

    International Nuclear Information System (INIS)

    Van Den Durpel, Luc; Thomas, Chris Creighton

    2005-01-01

    The role of nuclear energy in a future sustainable energy mix has been the subject of debates over the past few years. The future for nuclear energy will not only depend on this energy market development and the socio-political environment, but also on the innovation potential of the nuclear community to cope with the ever shorter business cycles in the energy market and the inherently longer term horizon needed in developing nuclear energy at its potential. Today's nuclear R and D community is in a transition phase, i.e. from former 'national' R and D-organisational structure to a truly international research area based on partnerships between organisations and companies creating networks-of-excellence. Several studies in the recent past have indicated the need for a shared vision in guiding this process. Identification of shared R and D-programmes, mergers and acquisitions of organizations and companies, knowledge gap analysis and the strategic mapping for each organization or company active in this nuclear R and D community. Technology Roadmapping is the appropriate tool to respond to these needs. Several stand-alone nuclear roadmap activities have been undertaken but lacked the possibility to analyse and make use of the synergies and interactions inherent to this technology development. The development has started of a master nuclear roadmap portal covering all the roadmap and technology foresight information in one so-called master nuclear roadmap. This master nuclear roadmap is implemented in an electronic online format allowing easy access, easy updating and lots of functionalities which may not be offered by traditional snap-shot roadmap reports. The paper will bring an overview on the role that technology roadmapping is playing in various industry sectors and the added value it may bring in the nuclear technology sector on a organizational as well as technology sector level. The paper will highlight the current status of this new initiative. (author)

  5. Science and Technology Test Mining: Disruptive Technology Roadmaps

    National Research Council Canada - National Science Library

    Kostoff, Ronald

    2003-01-01

    Disruptive technologies create growth in the industries they penetrate or create entirely new industries through the introduction of products and services that are dramatically cheaper, better, and more convenient...

  6. Energy Technology Roadmaps: A Guide to Development and Implementation. 2014 edition

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-03-01

    New low-carbon technologies show clear potential for transforming the global energy system, but a key challenge remains: what steps do governments and industry need to take to ensure their development and deployment? Roadmapping, used for decades in technology-intensive industries, is a useful tool to help address complicated issues strategically at the national, regional and global levels. To help turn political statements and analytical work into concrete action, the International Energy Agency (IEA) is developing a series of global roadmaps devoted to low-carbon energy technologies. Drawing upon the extensive IEA experience, this guide is aimed at providing countries and companies with the context, information and tools needed to design, manage and implement an effective energy technology roadmap process relevant to their own local circumstances and objectives. This edition of the Energy Technology Roadmaps: a guide to development and implementation includes more detailed guidance on how to identify key stakeholders, develop a technology baseline and development of indicators to help track progress against roadmap milestones. The IEA hopes that this guide and the examples and references it offers, together with the new IEA How2Guides, which provide technology-specific guidance, will help national and local policy makers and industry to develop strategies that accelerate the deployment of low-carbon energy technologies worldwide.

  7. Technology Area Roadmap for In-Space Propulsion Technologies

    Science.gov (United States)

    Johnson, Les; Meyer, Michael; Palaszewski, Bryan; Coote, David; Goebel, Dan; White, Harold

    2012-01-01

    The exponential increase of launch system size.and cost.with delta-V makes missions that require large total impulse cost prohibitive. Led by NASA fs Marshall Space Flight Center, a team from government, industry, and academia has developed a flight demonstration mission concept of an integrated electrodynamic (ED) tethered satellite system called PROPEL: \\Propulsion using Electrodynamics.. The PROPEL Mission is focused on demonstrating a versatile configuration of an ED tether to overcome the limitations of the rocket equation, enable new classes of missions currently unaffordable or infeasible, and significantly advance the Technology Readiness Level (TRL) to an operational level. We are also focused on establishing a far deeper understanding of critical processes and technologies to be able to scale and improve tether systems in the future. Here, we provide an overview of the proposed PROPEL mission. One of the critical processes for efficient ED tether operation is the ability to inject current to and collect current from the ionosphere. Because the PROPEL mission is planned to have both boost and deboost capability using a single tether, the tether current must be capable of flowing in both directions and at levels well over 1 A. Given the greater mobility of electrons over that of ions, this generally requires that both ends of the ED tether system can both collect and emit electrons. For example, hollow cathode plasma contactors (HCPCs) generally are viewed as state-of-the-art and high TRL devices; however, for ED tether applications important questions remain of how efficiently they can operate as both electron collectors and emitters. Other technologies will be highlighted that are being investigated as possible alternatives to the HCPC such as Solex that generates a plasma cloud from a solid material (Teflon) and electron emission (only) technologies such as cold-cathode electron field emission or photo-electron beam generation (PEBG) techniques

  8. NASA Space Technology Draft Roadmap Area 13: Ground and Launch Systems Processing

    Science.gov (United States)

    Clements, Greg

    2011-01-01

    This slide presentation reviews the technology development roadmap for the area of ground and launch systems processing. The scope of this technology area includes: (1) Assembly, integration, and processing of the launch vehicle, spacecraft, and payload hardware (2) Supply chain management (3) Transportation of hardware to the launch site (4) Transportation to and operations at the launch pad (5) Launch processing infrastructure and its ability to support future operations (6) Range, personnel, and facility safety capabilities (7) Launch and landing weather (8) Environmental impact mitigations for ground and launch operations (9) Launch control center operations and infrastructure (10) Mission integration and planning (11) Mission training for both ground and flight crew personnel (12) Mission control center operations and infrastructure (13) Telemetry and command processing and archiving (14) Recovery operations for flight crews, flight hardware, and returned samples. This technology roadmap also identifies ground, launch and mission technologies that will: (1) Dramatically transform future space operations, with significant improvement in life-cycle costs (2) Improve the quality of life on earth, while exploring in co-existence with the environment (3) Increase reliability and mission availability using low/zero maintenance materials and systems, comprehensive capabilities to ascertain and forecast system health/configuration, data integration, and the use of advanced/expert software systems (4) Enhance methods to assess safety and mission risk posture, which would allow for timely and better decision making. Several key technologies are identified, with a couple of slides devoted to one of these technologies (i.e., corrosion detection and prevention). Development of these technologies can enhance life on earth and have a major impact on how we can access space, eventually making routine commercial space access and improve building and manufacturing, and weather

  9. BMT Roadmap: A User-Centered Design Health Information Technology Tool to Promote Patient-Centered Care in Pediatric Hematopoietic Cell Transplantation.

    Science.gov (United States)

    Runaas, Lyndsey; Hanauer, David; Maher, Molly; Bischoff, Evan; Fauer, Alex; Hoang, Tiffany; Munaco, Anna; Sankaran, Roshun; Gupta, Rahael; Seyedsalehi, Sajjad; Cohn, Amy; An, Larry; Tewari, Muneesh; Choi, Sung Won

    2017-05-01

    Health information technology (HIT) has great potential for increasing patient engagement. Pediatric hematopoietic cell transplantation (HCT) is a setting ripe for using HIT but in which little research exists. "BMT Roadmap" is a web-based application that integrates patient-specific information and includes several domains: laboratory results, medications, clinical trial details, photos of the healthcare team, trajectory of transplant process, and discharge checklist. BMT Roadmap was provided to 10 caregivers of patients undergoing first-time HCT. Research assistants performed weekly qualitative interviews throughout the patient's hospitalization and at discharge and day 100 to assess the impact of BMT Roadmap. Rigorous thematic analysis revealed 5 recurrent themes: emotional impact of the HCT process itself; critical importance of communication among patients, caregivers, and healthcare providers; ways in which BMT Roadmap was helpful during inpatient setting; suggestions for improving BMT Roadmap; and other strategies for organization and management of complex healthcare needs that could be incorporated into BMT Roadmap. Caregivers found the tool useful and easy to use, leading them to want even greater access to information. BMT Roadmap was feasible, with no disruption to inpatient care. Although this initial study is limited by the small sample size and single-institution experience, these initial findings are encouraging and support further investigation. Copyright © 2017 The American Society for Blood and Marrow Transplantation. Published by Elsevier Inc. All rights reserved.

  10. SUPPLIER SELECTION STRATEGY AND MANUFACTURING FLEXIBILITY: IMPACT OF QUALITY AND TECHNOLOGY ROADMAPS

    Directory of Open Access Journals (Sweden)

    Muhamad Jantan

    2006-01-01

    Full Text Available The study evaluates the relationship between technology, quality, cost and delivery performance-based, supplier selection strategies, and manufacturing flexibilities namely, product flexibility, launch flexibility, and volume flexibility. Moreover, the moderating impact of supplier management strategies, namely quality roadmap and technology roadmap on the above relationships were also explored. The data for the study was drawn from a sample of companies listed in the factory directory published by the Penang Development Corporation (PDC. A postal survey of 120 manufacturers provided a return of 92 usable responses. The results reveal that the selection of suppliers based on technological and quality performance positively affects all the three dimensions of manufacturing flexibility, with complementary effects of good technology and quality roadmaps. Technology and quality roadmaps act as predictors for product and volume flexibilities. However, when launch flexibility is the focus, both technology and quality roadmaps moderate the impact of supplier selection strategies. Details of the findings, theoretical and practical implications, and the research limitation are discussed.

  11. A National Roadmap for Vadose Zone Science and Technology

    Energy Technology Data Exchange (ETDEWEB)

    Kowall, Stephen Jacob

    2001-08-01

    This roadmap is a means of achieving, to the best of our current knowledge, a reasonable scientific understanding of how contaminants of all forms move in the vadose geological environments. This understanding is needed to reduce the present uncertainties in predicting contaminant movement, which in turn will reduce the uncertainties in remediation decisions.

  12. Windows and Building Envelope Research and Development: A Roadmap for Emerging Technologies

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2014-02-01

    This Building Technologies Office (BTO) Research and Development (R&D) Roadmap identifies priority windows and building envelope R&D areas of interest. Cost and performance targets are identified for each key R&D area. The roadmap describes the technical and market challenges to be overcome, R&D activities and milestones, key stakeholders, and potential energy savings that could result if cost and performance targets are met. Methods for improving technology performance and specific strategies for reducing installed costs and mitigating any other market barriers, which would increase the likelihood of mass-market technology adoption, are identified. This roadmap is a useful resource for public and private decision makers evaluating and pursuing high-impact R&D focused on advancing next-generation energy efficient windows and building envelope technologies.

  13. Fluoride Salt-Cooled High-Temperature Reactor Technology Development and Demonstration Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Holcomb, David Eugene [ORNL; Flanagan, George F [ORNL; Mays, Gary T [ORNL; Pointer, William David [ORNL; Robb, Kevin R [ORNL; Yoder Jr, Graydon L [ORNL

    2013-11-01

    Fluoride salt-cooled High-temperature Reactors (FHRs) are an emerging reactor class with potentially advantageous performance characteristics, and fully passive safety. This roadmap describes the principal remaining FHR technology challenges and the development path needed to address the challenges. This roadmap also provides an integrated overview of the current status of the broad set of technologies necessary to design, evaluate, license, construct, operate, and maintain FHRs. First-generation FHRs will not require any technology breakthroughs, but do require significant concept development, system integration, and technology maturation. FHRs are currently entering early phase engineering development. As such, this roadmap is not as technically detailed or specific as would be the case for a more mature reactor class. The higher cost of fuel and coolant, the lack of an approved licensing framework, the lack of qualified, salt-compatible structural materials, and the potential for tritium release into the environment are the most obvious issues that remain to be resolved.

  14. Parabolic-trough technology roadmap: A pathway for sustained commercial development and deployment of parabolic-trough technology

    International Nuclear Information System (INIS)

    David Kearney; Hank Price

    1999-01-01

    Technology roadmapping is a needs-driven technology planning process to help identify, select, and develop technology alternatives to satisfy a set of market needs. The DOE's Office of Power Technologies' Concentrating Solar Power (CSP) Program recently sponsored a technology roadmapping workshop for parabolic trough technology. The workshop was attended by an impressive cross section of industry and research experts. The goals of the workshop were to evaluate the market potential for trough power projects, develop a better understanding of the current state of the technology, and to develop a conceptual plan for advancing the state of parabolic trough technology. This report documents and extends the roadmap that was conceptually developed during the workshop

  15. Parabolic-Trough Technology Roadmap: A Pathway for Sustained Commercial Development and Deployment of Parabolic-Trough Technology

    Energy Technology Data Exchange (ETDEWEB)

    Price, H.; Kearney, D.

    1999-01-31

    Technology roadmapping is a needs-driven technology planning process to help identify, select, and develop technology alternatives to satisfy a set of market needs. The DOE's Office of Power Technologies' Concentrating Solar Power (CSP) Program recently sponsored a technology roadmapping workshop for parabolic trough technology. The workshop was attended by an impressive cross section of industry and research experts. The goals of the workshop were to evaluate the market potential for trough power projects, develop a better understanding of the current state of the technology, and to develop a conceptual plan for advancing the state of parabolic trough technology. This report documents and extends the roadmap that was conceptually developed during the workshop.

  16. Technology Roadmap: Low-Carbon Technology for the Indian Cement Industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-06-01

    The Indian cement industry is one of the most efficient in the world. Its efforts to reduce its carbon footprint by adopting the best available technologies and environmental practices are reflected in the achievement of reducing total CO2 emissions to an industrial average of 0.719 tCO2/t cement in 2010 from a substantially higher level of 1.12 tCO2/t cement in 1996. However, because the manufacturing process relies on the burning of limestone, it still produced 137 MtCO2 in 2010 – approximately 7% of India’s total man-made CO2 emissions. Yet opportunity for improvement exists, particularly in relation to five key levers that can contribute to emissions reductions: alternative fuel and raw materials; energy efficiency; clinker substitution; waste heat recovery and newer technologies. This roadmap sets out one pathway by which the Indian cement industry can reach its targets to improve energy efficiency and reduce CO2 emissions by 2050, thereby laying the foundation for low-carbon growth in the years beyond. The Technology Roadmap: Low-Carbon Technology for the Indian Cement Industry builds on the global IEA technology roadmap for the cement sector developed by the IEA and the World Business Council for Sustainable Development’s Cement Sustainability Initiative. It outlines a possible transition path for the Indian cement industry to reduce its direct CO2 emissions intensity to 0.35 tCO2/t cement and support the global goal of halving CO2 emissions by 2050.

  17. High power density superconducting rotating machines—development status and technology roadmap

    Science.gov (United States)

    Haran, Kiruba S.; Kalsi, Swarn; Arndt, Tabea; Karmaker, Haran; Badcock, Rod; Buckley, Bob; Haugan, Timothy; Izumi, Mitsuru; Loder, David; Bray, James W.; Masson, Philippe; Stautner, Ernst Wolfgang

    2017-12-01

    Superconducting technology applications in electric machines have long been pursued due to their significant advantages of higher efficiency and power density over conventional technology. However, in spite of many successful technology demonstrations, commercial adoption has been slow, presumably because the threshold for value versus cost and technology risk has not yet been crossed. One likely path for disruptive superconducting technology in commercial products could be in applications where its advantages become key enablers for systems which are not practical with conventional technology. To help systems engineers assess the viability of such future solutions, we present a technology roadmap for superconducting machines. The timeline considered was ten years to attain a Technology Readiness Level of 6+, with systems demonstrated in a relevant environment. Future projections, by definition, are based on the judgment of specialists, and can be subjective. Attempts have been made to obtain input from a broad set of organizations for an inclusive opinion. This document was generated through a series of teleconferences and in-person meetings, including meetings at the 2015 IEEE PES General meeting in Denver, CO, the 2015 ECCE in Montreal, Canada, and a final workshop in April 2016 at the University of Illinois, Urbana-Champaign that brought together a broad group of technical experts spanning the industry, government and academia.

  18. Roadmaps for the Development of Technologies Related to Danish Wave Power Systems

    DEFF Research Database (Denmark)

    Nielsen, Kim; Krogh, Jan; Brodersen, H. J.

    2015-01-01

    of coordinating and focus the research, development and test activities. The aim is that the resources (financial and know-how) are used appropriately and with the greatest possible progress. Within each of the 4 areas, the starting point is based on the state of the art technology, and the roadmaps outline what......The Danish Partnership for Wave Power was established in 2011 under the project "New strategy for wave power through industrial partnership" [1] funded by the Danish Energy Technology Development and Demonstration Program. The core of this partnership is nine active Danish wave energy developers...... seconded by offshore industry, and research institutions. The Danish Partnership for Wave Power has further been consolidated through the follow-on Roadmap project described in this paper. The roadmap project has in detail investigated how the four most common technology areas for wave power developers can...

  19. A technology roadmap of assistive technologies for dementia care in Japan.

    Science.gov (United States)

    Sugihara, Taro; Fujinami, Tsutomu; Phaal, Robert; Ikawa, Yasuo

    2015-01-01

    The number of elderly people in Japan is growing, which raises the issue of dementia, as the probability of becoming cognitively impaired increases with age. There is an increasing need for caregivers, who are well-trained, experienced and can pay special attention to the needs of people with dementia. Technology can play an important role in helping such people and their caregivers. A lack of mutual understanding between caregivers and researchers regarding the appropriate uses of assistive technologies is another problem. A vision of person-centred care based on the use of information and communication technology to maintain residents' autonomy and continuity in their lives is presented. Based on this vision, a roadmap and a list of challenges to realizing assistive technologies have been developed. The roadmap facilitates mutual understanding between caregivers and researchers, resulting in appropriate technologies to enhance the quality of life of people with dementia. © The Author(s) 2013 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

  20. Transition Management: Case Study of an Energy Efficiency Technology Roadmap in Turkey

    Directory of Open Access Journals (Sweden)

    Şiir Kilkiş

    2014-12-01

    Full Text Available This paper integrates several streams of literature in transition management and proposes a holistic framework for its application in policy-making. Separate fields of study, such as motors of change and strategic intelligence tools, are unified in a single analytical process. The process involves five steps that may be repeated until a desired policy objective is achieved. The pilot, integrated technology roadmap process that has been launched in Turkey is analyzed as a case study. The Energy Efficiency Technology Roadmap has been completed with the participation of over 160 experts in 5 different stages. It involved the collection of over 349 Delfi statements, their consolidation for a Delfi survey with 16 statements, the analysis of the results, a focal group meeting to develop roadmaps for the 7 selected goals, and the consultation of the roadmaps to the sector. The paper concludes that an integrated technology roadmap process, as described in the pilot case study, provides an advanced version of transition management, which is needed to mobilize research, development, and innovation for sustainable development.

  1. Nanotechnology for the Forest Products Industry Vision and Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Atalla, Rajai [USDA Forest Service, Washington, DC (United States); Beecher, James [USDA Forest Service, Washington, DC (United States); Caron, Robert [Technical Association of the Pulp and Paper Industry, Peachtree Corners, GA (United States); Catchmark, Jeffrey [Pennsylvania State Univ., State College, PA (United States); Deng, Yulin [Georgia Inst. of Technology, Atlanta, GA (United States); Glasser, Wolfgang [Virginia Polytechnic Inst. and State Univ. (Virginia Tech), Blacksburg, VA (United States); Gray, Derek [McGill Univ., Montreal, QC (Canada); Haigler, Candace [North Carolina State Univ., Raleigh, NC (United States); Jones, Philip [Imerys, Paris (France); Joyce, Margaret [Western Michigan Univ., Kalamazoo MI (United States); Kohlman, Jane [USDA Forest Service, Washington, DC (United States); Koukoulas, Alexander [Technical Association of the Pulp and Paper Industry, Peachtree Corners, GA (United States); Lancaster, Peter [Weyerhaeuser Company, Longview, WA (United States); Perine, Lori [American Forest and Paper Association, Washington, DC (United States); Rodriguez, Augusto [Georgia-Pacific Corporation, Atlanta, GA (United States); Ragauskas, Arthur [Georgia Inst. of Technology, Atlanta, GA (United States); Wegner, Theodore [USDA Forest Service, Washington, DC (United States); Zhu, Junyong [USDA Forest Service, Washington, DC (United States)

    2005-03-01

    A roadmap for Nanotechnology in the Forest Products Industries has been developed under the umbrella of the Agenda 2020 program overseen by the CTO committee. It is expected that the use of new analytical techniques and methodologies will allow us to understand the complex nature of wood based materials and allow the dramatically enhanced use of the major strategic asset the US has in renewable, recyclable resources based on its well managed Forests.

  2. The place of digital technology on the IEA's energy road-maps

    International Nuclear Information System (INIS)

    Ben-Naceur, Kamel

    2017-01-01

    The International Energy Agency (IEA) has drafted road-maps for the next four decades in collaboration with public and private producers and consumers of energy. For each type of energy, these road-maps indicate the key elements for compliance with the objectives of the Paris Climate Agreement. They emphasize the role of digital technology, in particular smart grids, in the transition toward a more digital and more intelligent energy system. The conditions necessary for successfully transforming this sector are mapped out, while attention is called to the risks inherent in this transition

  3. NASA Space Technology Roadmaps and Priorities: Restoring NASA's Technological Edge and Paving the Way for a New Era in Space

    Science.gov (United States)

    2012-01-01

    Success in executing future NASA space missions will depend on advanced technology developments that should already be underway. It has been years since NASA has had a vigorous, broad-based program in advanced space technology development, and NASA's technology base is largely depleted. As noted in a recent National Research Council report on the U.S. civil space program: Future U.S. leadership in space requires a foundation of sustained technology advances that can enable the development of more capable, reliable, and lower-cost spacecraft and launch vehicles to achieve space program goals. A strong advanced technology development foundation is needed also to enhance technology readiness of new missions, mitigate their technological risks, improve the quality of cost estimates, and thereby contribute to better overall mission cost management. Yet financial support for this technology base has eroded over the years. The United States is now living on the innovation funded in the past and has an obligation to replenish this foundational element. NASA has developed a draft set of technology roadmaps to guide the development of space technologies under the leadership of the NASA Office of the Chief Technologist. The NRC appointed the Steering Committee for NASA Technology Roadmaps and six panels to evaluate the draft roadmaps, recommend improvements, and prioritize the technologies within each and among all of the technology areas as NASA finalizes the roadmaps. The steering committee is encouraged by the initiative NASA has taken through the Office of the Chief Technologist (OCT) to develop technology roadmaps and to seek input from the aerospace technical community with this study.

  4. Situation awareness of active distribution network: roadmap, technologies, and bottlenecks

    DEFF Research Database (Denmark)

    Lin, Jin; Wan, Can; Song, Yonghua

    2016-01-01

    With the rapid development of local generation and demand response, the active distribution network (ADN), which aggregates and manages miscellaneous distributed resources, has moved from theory to practice. Secure and optimal operations now require an advanced situation awareness (SA) system so...... in the project of developing an SA system as the basic component of a practical active distribution management system (ADMS) deployed in Beijing, China, is presented. This paper reviews the ADN’s development roadmap by illustrating the changes that are made in elements, topology, structure, and control scheme....... Taking into consideration these hardware changes, a systematic framework is proposed for the main components and the functional hierarchy of an SA system for the ADN. The SA system’s implementation bottlenecks are also presented, including, but not limited to issues in big data platform, distribution...

  5. Technology roadmap study on carbon capture, utilization and storage in China

    International Nuclear Information System (INIS)

    Zhang, Xian; Fan, Jing-Li; Wei, Yi-Ming

    2013-01-01

    Carbon capture, utilization and storage (CCUS) technology will likely become an important approach to reduce carbon dioxide (CO 2 ) emissions and optimize the structure of energy consumption in China in the future. In order to provide guidance and recommendations for CCUS Research, Development and Demonstration in China, a high level stakeholder workshop was held in Chongqing in June 2011 to develop a technology roadmap for the development of CCUS technology. This roadmap outlines the overall vision to provide technically viable and economically affordable technological options to combat climate change and facilitate socio-economic development in China. Based on this vision, milestone goals from 2010 to 2030 are set out in accordance with the technology development environment and current status in China. This study identifies the critical technologies in capture, transport, utilization and storage of CO 2 and proposes technical priorities in the different stages of each technical aspect by evaluating indices such as the objective contribution rate and technical maturity, and gives recommendations on deployment of full-chain CCUS demonstration projects. Policies which would support CCUS are also suggested in this study. - Highlights: • A technology roadmap for CCUS development in China from 2010 to 2030 is presented. • Sound data and analysis in combination with expert workshops are used. • Critical technologies in CCUS are identified. • Priority actions of all stages are identified and proposed. • Guidance and recommendations for CCUS RD and D are provided

  6. Roadmapping and Strategy in Science, Technology and Innovation: Why connectivity matters

    DEFF Research Database (Denmark)

    Ricard, Lykke Margot

    The thesis focuses on the coordination of technology-intensive innovation activities at both sector and firm levels, supported by the use of the strategic roadmapping method. Investigations combine qualitative and quantitative research methods; using a narrative approach in the form of interviews...... to uncover innovation and technology barriers, and a social network analysis of stakeholders’ role in relation to two technology platforms: TPWind and ZEP (Zero Emission Platform), during a five-year period when the roadmaps 2020 were developed. In this respect, the thesis emphasizes the view of innovation...... as an interactive process to develop competences among technology users, producers, research institutions, and politicians. As a result, knowledge on how the platforms evolved, and their dynamics, provide new reflections on the innovation systems approach: that connectivity seems to change along the changes...

  7. Advanced Safeguards Technology Road-map for the Global Nuclear Energy Partnership

    International Nuclear Information System (INIS)

    Miller, M.C.; Tobin, S.; Smith, L.E.; Ehinger, M.; Dougan, A.; Cipiti, B.; Bakel, A.; Bean, R.

    2008-01-01

    Strengthening the nonproliferation regime, including advanced safeguards, is a cornerstone of the Global Nuclear Energy Partnership (GNEP). To meet these challenges, the Safeguards Campaign was formed, whose mission is to provide research and technology development for the foundation of next generation safeguards systems for implementation in U.S. GNEP facilities. The Safeguards Campaign works closely with the Nuclear Nonproliferation and International Security department (NA-24) of NNSA (National Nuclear Safety Administration) to ensure that technology developed for domestic safeguards applications are optimum with respect to international safeguards use. A major milestone of the program this year has been the development of the advanced safeguards technology road-map. This paper will broadly describe the road-map, which provides a path to next generation safeguards systems including advanced instrumentation; process monitoring; data integration, protection, and analysis; and system level evaluation and knowledge extraction for real time applications. (authors)

  8. Technology Roadmaps - Electric and plug-in hybrid electric vehicles (EV/PHEV)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-06-15

    The mass deployment of electric and plug-in hybrid electric vehicles (EVs and PHEVs) that rely on low greenhouse gas (GHG) emission electricity generation has great potential to significantly reduce the consumption of petroleum and other high CO2-emitting transportation fuels. The vision of the Electric and Plug-in Hybrid (EV/PHEV) Vehicles Roadmap is to achieve by 2050 the widespread adoption and use of EVs and PHEVs, which together represent more than 50% of annual LDV (light duty vehicle) sales worldwide. In addition to establishing a vision, this roadmap sets strategic goals to achieve it, and identifies the steps that need to be taken to accomplish these goals. This roadmap also outlines the roles and collaboration opportunities for different stakeholders and shows how government policy can support the overall achievement of the vision. The strategic goals for attaining the widespread adoption and use of EVs and PHEVs worldwide by 2050 cover the development of the EV/PHEV market worldwide through 2030 and involve targets that align with global targets to stabilise GHG concentrations. These technology-specific goals include the following: Set targets for electric-drive vehicle sales; Develop coordinated strategies to support the market introduction of electric-drive vehicles; Improve industry understanding of consumer needs and behaviours; Develop performance metrics for characterising vehicles; Foster energy storage RD and D initiatives to reduce costs and address resource-related issues; and, Develop and implement recharging infrastructure. The roadmap outlines additional recommendations that must be considered in order to successfully meet the technology milestones and strategic goals. These recommendations include the following: Use a comprehensive mix of policies that provide a clear framework and balance stakeholder interests; Engage in international collaboration efforts; and, Address policy and industry needs at a national level. The IEA will work in an

  9. Material Protection, Accounting, and Control Technologies (MPACT): Modeling and Simulation Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Cipiti, Benjamin [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Dunn, Timothy [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Durbin, Samual [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Durkee, Joe W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); England, Jeff [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Jones, Robert [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Ketusky, Edward [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Li, Shelly [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lindgren, Eric [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Meier, David [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Miller, Michael [Idaho National Lab. (INL), Idaho Falls, ID (United States); Osburn, Laura Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Pereira, Candido [Argonne National Lab. (ANL), Argonne, IL (United States); Rauch, Eric Benton [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Scaglione, John [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Scherer, Carolynn P. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Sprinkle, James K. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Yoo, Tae-Sic [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-08-05

    The development of sustainable advanced nuclear fuel cycles is a long-term goal of the Office of Nuclear Energy’s (DOE-NE) Fuel Cycle Technologies program. The Material Protection, Accounting, and Control Technologies (MPACT) campaign is supporting research and development (R&D) of advanced instrumentation, analysis tools, and integration methodologies to meet this goal. This advanced R&D is intended to facilitate safeguards and security by design of fuel cycle facilities. The lab-scale demonstration of a virtual facility, distributed test bed, that connects the individual tools being developed at National Laboratories and university research establishments, is a key program milestone for 2020. These tools will consist of instrumentation and devices as well as computer software for modeling. To aid in framing its long-term goal, during FY16, a modeling and simulation roadmap is being developed for three major areas of investigation: (1) radiation transport and sensors, (2) process and chemical models, and (3) shock physics and assessments. For each area, current modeling approaches are described, and gaps and needs are identified.

  10. A technology roadmap for photonics in the automobile, part 1: innovative front lighting

    Science.gov (United States)

    Berlitz, S.; Grimm, M.; Eichhorn, K.; Goetz, M.; Meyrueis, P.; Pearsall, T. P.; Reill, J.; Repetto, P.; Tupinier, L.

    2006-04-01

    Innovations in photonics technology have the potential to revolutionize both the inside and the outside of the automobile, making driving, simpler, safer, and more economical. Some of the most interesting applications areas are: lighting, communications, night vision, display, entertainment, and controls. However, the commercialization of these technologies will depend on a number of factors: cost, proven improvements in safety, economy of operation, availability of mass-produced components with high uniformity and reliability, regulations, and standards. The automotive industry recognizes the utility of a roadmap to focus all players, from basic device manufacturing and component integrators, to set manufacturers and ultimately automotive assemblers. In this paper we report on progress on an important component of this roadmap concerning adaptive front-lighting systems (AFS).

  11. A Contribution to Guide the Use of Support Tools for Technology Roadmapping: a Case Study in the Clothing Industry

    OpenAIRE

    Cindy Johanna Ibarra González; André Ogliari; Aline França de Abreu

    2013-01-01

    This article presents guidelines regarding the use of tools to support technology roadmapping based on a case study of an exploratory and descriptive nature in a small company in the clothing sector. After introducing a systematic approach to technology roadmapping with their support tools, an empirical analysis is then presented of the application of the tools of the market layer – a questionnaire for consultation with the consumers and bibliographical research – and the business layer – SWO...

  12. Roadmapping - A Tool for Resolving Science and Technology Issues Related to Processing, Packaging, and Shipping Nuclear Materials and Waste

    Energy Technology Data Exchange (ETDEWEB)

    Luke, Dale Elden; Dixon, Brent Wayne; Murphy, James Anthony

    2002-06-01

    Roadmapping is an effective methodology to identify and link technology development and deployment efforts to a program's or project's needs and requirements. Roadmapping focuses on needed technical support to the baselines (and to alternatives to the baselines) where the probability of success is low (high uncertainty) and the consequences of failure are relatively high (high programmatic risk, higher cost, longer schedule, or higher ES&H risk). The roadmap identifies where emphasis is needed, i.e., areas where investments are large, the return on investment is high, or the timing is crucial. The development of a roadmap typically involves problem definition (current state versus the desired state) and major steps (functions) needed to reach the desired state. For Nuclear Materials (NM), the functions could include processing, packaging, storage, shipping, and/or final disposition of the material. Each function is examined to determine what technical development would be needed to make the function perform as desired. This requires a good understanding of the current state of technology and technology development and validation activities to ensure the viability of each step. In NM disposition projects, timing is crucial! Technology must be deployed within the project window to be of value. Roadmaps set the stage to keep the technology development and deployment focused on project milestones and ensure that the technologies are sufficiently mature when needed to mitigate project risk and meet project commitments. A recent roadmapping activity involved a 'cross-program' effort, which included NM programs, to address an area of significant concern to the Department of Energy (DOE) related to gas generation issues, particularly hydrogen. The roadmap that was developed defined major gas generation issues within the DOE complex and research that has been and is being conducted to address gas generation concerns. The roadmap also provided the basis

  13. Technology roadmap for development of SiC sensors at plasma processes laboratory

    Directory of Open Access Journals (Sweden)

    Mariana Amorim Fraga

    2010-08-01

    Full Text Available Recognizing the need to consolidate the research and development (R&D activities in microelectronics fields in a strategic manner, the Plasma Processes Laboratory of the Technological Institute of Aeronautics (LPP-ITA has established a technology roadmap to serve as a guide for activities related to development of sensors based on silicon carbide (SiC thin films. These sensors have also potential interest to the aerospace field due to their ability to operate in harsh environment such as high temperatures and intense radiation. In the present paper, this roadmap is described and presented in four main sections: i introduction, ii what we have already done in the past, iii what we are doing in this moment, and iv our targets up to 2015. The critical technological issues were evaluated for different categories: SiC deposition techniques, SiC processing techniques for sensors fabrication and sensors characterization. This roadmap also presents a shared vision of how R&D activities in microelectronics should develop over the next five years in our laboratory.

  14. LAW ENFORCEMENT TECHNOLOGY ROADMAP: LESSONS TO DATE FROM THE NORTHWEST TECHNOLOGY DESK AND THE NORTHWEST FADE PILOTS

    Energy Technology Data Exchange (ETDEWEB)

    West, Curtis L.; Kreyling, Sean J.

    2011-04-01

    The goal of this report is to provide insight into the information technology needs of law enforcement based on first hand observations as an embedded and active participant over the course of two plus years. This report is intended as a preliminary roadmap for technology and project investment that will benefit the entire law enforcement community nationwide. Some recommendations are immediate and have more of an engineering flavor, while others are longer term and will require research and development to solve.

  15. IEA-NEA Nuclear Technology Road-map Update - Asia Stakeholder Engagement Workshop

    International Nuclear Information System (INIS)

    Tam, Cecilia; ); Paillere, Henri; ); Guoxing, Gu; Tianmin, Xin; Autebert, Remy; Murphy, Paul; Barkatullah, Nadira; Nkong-Njock, Vincent; Dubinsky, Melissa; Cordero, Didier

    2014-01-01

    In 2010, the International Energy Agency (IEA) and the Nuclear Energy Agency (NEA) released a Nuclear Energy Technology Road-map which outlined the steps needed to accelerate the development of nuclear power and its role in achieve deep greenhouse-gas emissions reduction. Both the global energy sector and the outlook for nuclear have changed significantly since then and an update of this Road-map is currently underway. The IEA and NEA held a stakeholder dialogue meeting focused on nuclear develop in Asia on 25 February 2014 in Hong Kong. The meeting brought together key stakeholders from industry, government, finance and other relevant organisations from Asia and beyond to help define and prioritise key items to be discussed in the IEA/NEA's Nuclear Road-map Update. One of the expected outcomes of this intensive brainstorming and Road-map development session was to discus key targets, milestones, policy measures and other actions needed to support the development and deployment of nuclear power. The workshop was organized in 3 sessions dealing with: Session 1 - Technology development needs for nuclear (Reactor technology, Fuel cycle and decommissioning); Session 2 - Breakout Discussion: - Group I: Financing nuclear. This session focussed on today's reality for financing nuclear and the current economics of nuclear. Mechanisms such as government loan guarantees, vendor financing and role of export credit agencies were discussed. Participants were asked to share lessons learnt and current practices on financing nuclear as well as recommendations (if needed) for additional policy support or changes in technology development (e.g. SMR) which would facilitate greater deployment of nuclear technologies. - Group II: Nuclear regulation and safety. This session focussed on regulatory needs for enhanced security and regulation for new build programmes, institutional development requirements for new nuclear countries. Safety research following the Fukushima Daiichi accident

  16. A roadmap for the development and market introduction of PVT technology

    Energy Technology Data Exchange (ETDEWEB)

    Zondag, H.A.; Van Helden, W.G.J.; Bakker, M.; Elswijk, M.J. [ECN Renewable Energy in the Built Environment DEGO, Petten (Netherlands)

    2005-11-15

    In PVT technology, heat is extracted from PV cells. In this way, a device is made that produces both electricity and heat. In the EU funded coordination action PV-Catapult, workshops on PVT were organised at the PVSEC 2004 Conference in Paris and the Eurosun 2004 conference in Freiburg, to obtain active participation of the PV and solar thermal communities. Currently, the results of the workshops are used in the drafting of a roadmap for the large scale introduction of PVT technology on the market. First results will be presented here.

  17. PVT roadmap. A European guide for the development and market introduction of PVT technology

    International Nuclear Information System (INIS)

    Zondag, H.A.; Van Helden, W.G.J.; Bakker, M.; Affolter, P.; Eisenmann, W.; Fechner, H.; Rommel, M.; Schaap, A.; Soerensen, H.; Tripanagnostopoulos, Y.

    2005-11-01

    In PVT technology, heat is extracted from PV cells. In this way, a device is made that produces both electricity and heat. In the EU-funded co-ordination action PV-Catapult, workshops on PVT were organised at the PVSEC 2004 Conference in Paris and the Eurosun 2004 conference in Freiburg, to obtain active participation of the PV and solar thermal communities. Currently, the results of the workshops are used in the drafting of a roadmap for the large-scale introduction of PVT technology on the market. First results will be presented here

  18. PVT roadmap. A European guide for the development and market introduction of PVT technology

    Energy Technology Data Exchange (ETDEWEB)

    Zondag, H.A.; Van Helden, W.G.J.; Bakker, M. [ECN Renewable Energy in the Built Environment DEGO, Petten (Netherlands); Affolter, P. [Solstis, Lausanne (Switzerland); Eisenmann, W. [Institut fuer Solarenergieforschung ISFH, Emmerthal (Germany); Fechner, H. [Arsenal Research, Vienna (Austria); Rommel, M. [Fraunhofer ISE, Freiburg (Germany); Schaap, A. [Ecofys, Utrecht (Netherlands); Soerensen, H. [Esbensen, Copenhagen (Denmark); Tripanagnostopoulos, Y. [University of Patras, Patras (Greece)

    2005-11-15

    In PVT technology, heat is extracted from PV cells. In this way, a device is made that produces both electricity and heat. In the EU-funded co-ordination action PV-Catapult, workshops on PVT were organised at the PVSEC 2004 Conference in Paris and the Eurosun 2004 conference in Freiburg, to obtain active participation of the PV and solar thermal communities. Currently, the results of the workshops are used in the drafting of a roadmap for the large-scale introduction of PVT technology on the market. First results will be presented here.

  19. A roadmap for the development and market introduction of PVT technology

    International Nuclear Information System (INIS)

    Zondag, H.A.; Van Helden, W.G.J.; Bakker, M.; Elswijk, M.J.

    2005-11-01

    In PVT technology, heat is extracted from PV cells. In this way, a device is made that produces both electricity and heat. In the EU funded coordination action PV-Catapult, workshops on PVT were organised at the PVSEC 2004 Conference in Paris and the Eurosun 2004 conference in Freiburg, to obtain active participation of the PV and solar thermal communities. Currently, the results of the workshops are used in the drafting of a roadmap for the large scale introduction of PVT technology on the market. First results will be presented here

  20. Enterprise Architecture (EA) Roadmap

    Data.gov (United States)

    Office of Personnel Management — The Enterprise Roadmap reflects the information technology (IT) investment priorities established in agency PortfolioStat reviews, as well as IT program decisions...

  1. Material Protection, Accounting, and Control Technologies (MPACT) Advanced Integration Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Miller, Mike [Idaho National Lab. (INL), Idaho Falls, ID (United States); Cipiti, Ben [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Demuth, Scott Francis [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Durkee, Jr., Joe W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Fallgren, Andrew James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Jarman, Ken [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Li, Shelly [Idaho National Lab. (INL), Idaho Falls, ID (United States); Meier, Dave [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Osburn, Laura Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Pereira, Candido [Argonne National Lab. (ANL), Argonne, IL (United States); Dasari, Venkateswara Rao [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Ticknor, Lawrence O. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Yoo, Tae-Sic [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2017-01-30

    The development of sustainable advanced nuclear fuel cycles is a long-term goal of the Office of Nuclear Energy’s (DOE-NE) Fuel Cycle Technologies program. The Material Protection, Accounting, and Control Technologies (MPACT) campaign is supporting research and development (R&D) of advanced instrumentation, analysis tools, and integration methodologies to meet this goal (Miller, 2015). This advanced R&D is intended to facilitate safeguards and security by design of fuel cycle facilities. The lab-scale demonstration of a virtual facility, distributed test bed, that connects the individual tools being developed at National Laboratories and university research establishments, is a key program milestone for 2020. These tools will consist of instrumentation and devices as well as computer software for modeling, simulation and integration.

  2. Material Protection, Accounting, and Control Technologies (MPACT) Advanced Integration Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Durkee, Joe W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Cipiti, Ben [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Demuth, Scott Francis [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Fallgren, Andrew James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Jarman, Ken [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Li, Shelly [Argonne National Lab. (ANL), Argonne, IL (United States); Meier, Dave [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Miller, Mike [Argonne National Lab. (ANL), Argonne, IL (United States); Osburn, Laura Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Pereira, Candido [Argonne National Lab. (ANL), Argonne, IL (United States); Dasari, Venkateswara Rao [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Ticknor, Lawrence O. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Yoo, Tae-Sic [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-09-30

    The development of sustainable advanced nuclear fuel cycles is a long-term goal of the Office of Nuclear Energy’s (DOE-NE) Fuel Cycle Technologies program. The Material Protection, Accounting, and Control Technologies (MPACT) campaign is supporting research and development (R&D) of advanced instrumentation, analysis tools, and integration methodologies to meet this goal (Miller, 2015). This advanced R&D is intended to facilitate safeguards and security by design of fuel cycle facilities. The lab-scale demonstration of a virtual facility, distributed test bed, that connects the individual tools being developed at National Laboratories and university research establishments, is a key program milestone for 2020. These tools will consist of instrumentation and devices as well as computer software for modeling, simulation and integration.

  3. Habitats and Surface Construction Technology and Development Roadmap

    Science.gov (United States)

    Cohen, Marc; Kennedy, Kriss J.

    1997-01-01

    The vision of the technology and development teams at NASA Ames and Johnson Research Centers is to provide the capability for automated delivery and emplacement of habitats and surface facilities. The benefits of the program are as follows: Composites and Inflatables: 30-50% (goal) lighter than Al Hard Structures; Capability for Increased Habitable Volume, Launch Efficiency; Long Term Growth Potential; and Supports initiation of commercial and industrial expansion. Key Habitats and Surface Construction (H&SC) technology issues are: Habitat Shell Structural Materials; Seals and Mechanisms; Construction and Assembly: Automated Pro-Deploy Construction Systems; ISRU Soil/Construction Equipment: Lightweight and Lower Power Needs; Radiation Protection (Health and Human Performance Tech.); Life Support System (Regenerative Life Support System Tech.); Human Physiology of Long Duration Space Flight (Health and Human Performance Tech.); and Human Psychology of Long Duration Space Flight (Health and Human Performance Tech.) What is being done regarding these issues?: Use of composite materials for X-38 CRV, RLV, etc.; TransHAB inflatable habitat design/development; Japanese corporations working on ISRU-derived construction processes. What needs to be done for the 2004 Go Decision?: Characterize Mars Environmental Conditions: Civil Engineering, Material Durability, etc.; Determine Credibility of Inflatable Structures for Human Habitation; and Determine Seal Technology for Mechanisms and Hatches, Life Cycle, and Durability. An overview encompassing all of the issues above is presented.

  4. Flight Avionics Hardware Roadmap

    Science.gov (United States)

    Hodson, Robert; McCabe, Mary; Paulick, Paul; Ruffner, Tim; Some, Rafi; Chen, Yuan; Vitalpur, Sharada; Hughes, Mark; Ling, Kuok; Redifer, Matt; hide

    2013-01-01

    As part of NASA's Avionics Steering Committee's stated goal to advance the avionics discipline ahead of program and project needs, the committee initiated a multi-Center technology roadmapping activity to create a comprehensive avionics roadmap. The roadmap is intended to strategically guide avionics technology development to effectively meet future NASA missions needs. The scope of the roadmap aligns with the twelve avionics elements defined in the ASC charter, but is subdivided into the following five areas: Foundational Technology (including devices and components), Command and Data Handling, Spaceflight Instrumentation, Communication and Tracking, and Human Interfaces.

  5. Technology Roadmap. Energy Loss Reduction and Recovery in Industrial Energy Systems

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2004-11-01

    To help guide R&D decision-making and gain industry insights on the top opportunities for improved energy systems, ITP sponsored the Energy Loss Reduction and Recoveryin Energy Systems Roadmapping Workshopin April 2004 in Baltimore, Maryland. This Technology Roadmapis based largely on the results of the workshop and additional industrial energy studies supported by ITP and EERE. It summarizes industry feedback on the top opportunities for R&D investments in energy systems, and the potential for national impacts on energy use and the environment.

  6. Planning and roadmapping technological innovations cases and tools

    CERN Document Server

    Pizarro, Melinda; Talla, Rajasree

    2014-01-01

    Across industries, firms vary broadly on how they operate with respect to their Research & Development (R&D) activities.  This volume presents a holistic approach to evaluating the critical elements of R&D management, including planning, organization, portfolio management, project management, and knowledge transfer—by assessing R&D management from different sectors.  Featuring empirical research and in-depth case studies from industries as diverse as medical imaging, electric vehicles, and cyber security, the authors identify common features of successful R&D management, despite fundamental differences, such as company size, number of employees, industry sector, and the R&D budget.  In particular, they consider the implications for decision making with respect to resource allocation and investments, such as site selection, purchasing, and cross-departmental communication.

  7. Technology Roadmap for the 21st Century Truck Program, a government-industry research partnership

    Energy Technology Data Exchange (ETDEWEB)

    None

    2000-12-01

    The 21st Century Truck Program has been established as a government-industry research partnership to support the development and implementation of commercially viable technologies that will dramatically cut fuel use and emissions of commercial trucks and buses while enhancing their safety and affordability as well as maintaining or enhancing performance. The innovations resulting from this program will reduce dependence on foreign oil, improve our nation's air quality, provide advanced technology for military vehicles, and enhance the competitiveness of the U.S. truck and bus industry while ensuring safe and affordable freight and bus transportation for the nation's economy. This Technology Roadmap for the 21st Century Truck Program has been prepared to guide the development of the technical advancements that will enable the needed improvements in commercial truck fuel economy, emissions, and safety.

  8. Patterning roadmap: 2017 prospects

    Science.gov (United States)

    Neisser, Mark

    2017-06-01

    Road mapping of semiconductor chips has been underway for over 20 years, first with the International Technology Roadmap for Semiconductors (ITRS) roadmap and now with the International Roadmap for Devices and Systems (IRDS) roadmap. The original roadmap was mostly driven bottom up and was developed to ensure that the large numbers of semiconductor producers and suppliers had good information to base their research and development on. The current roadmap is generated more top-down, where the customers of semiconductor chips anticipate what will be needed in the future and the roadmap projects what will be needed to fulfill that demand. The More Moore section of the roadmap projects that advanced logic will drive higher-resolution patterning, rather than memory chips. Potential solutions for patterning future logic nodes can be derived as extensions of `next-generation' patterning technologies currently under development. Advanced patterning has made great progress, and two `next-generation' patterning technologies, EUV and nanoimprint lithography, have potential to be in production as early as 2018. The potential adoption of two different next-generation patterning technologies suggests that patterning technology is becoming more specialized. This is good for the industry in that it lowers overall costs, but may lead to slower progress in extending any one patterning technology in the future.

  9. R and D strategy of the Korean electric industry using a Technology Roadmap(Trm) approach

    International Nuclear Information System (INIS)

    Lee, Y.E.

    2005-01-01

    The proper allocation of the limited R and D resources under the restructuring of the electric industry is a primary motivator for this electricity technology roadmap (eTRM) initiative. Because the major interests of CEOs could be the short term profit of their company under the competitive electric industry, it would wrong of them to cut back on the long term R and D budgets which make it impossible to develop all the technologies. Therefore, we should select and support only the favorable and competitive technologies to meet the future market needs using the TRM approach with the concept of ''selection and concentration.'' This study aims at defining the key technologies basis from the forecasts of what is possible or likely to happen in the future and planning the course of action for the technology development in the electricity field in Korea. The selected technologies could be the candidates for the mid and long term R and D program supported concentrically by the Electricity Industry Infrastructure Fund. (orig.)

  10. A technology roadmap of smart biosensors from conventional glucose monitoring systems.

    Science.gov (United States)

    Shende, Pravin; Sahu, Pratiksha; Gaud, Ram

    2017-06-01

    The objective of this review article is to focus on technology roadmap of smart biosensors from a conventional glucose monitoring system. The estimation of glucose with commercially available devices involves analysis of blood samples that are obtained by pricking finger or extracting blood from the forearm. Since pain and discomfort are associated with invasive methods, the non-invasive measurement techniques have been investigated. The non-invasive methods show advantages like non-exposure to sharp objects such as needles and syringes, due to which there is an increase in testing frequency, improved control of glucose concentration and absence of pain and biohazard materials. This review study is aimed to describe recent invasive techniques and major noninvasive techniques, viz. biosensors, optical techniques and sensor-embedded contact lenses for glucose estimation.

  11. A study on the framework for selecting core R and D programmes in Energy Technology Roadmap by the DEA approach

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Seong Kon; Mogi, Gento; Kim, Jong Wook

    2007-07-01

    South Korea is the 10th largest energy consumer in the world because of the poor country of natural resources such as petroleum, coal, and natural gas. It is essential to solve the energy difficulty of secure supply and demand of national energy. We established the energy technology roadmap to prepare for the next 10 years. We clustered 3 core technological sectors such as technology for high oil prices, the United nations framework for climate change, and the hydrogen economy. But we didn't prioritize the weights of energy technology development in energy technology roadmap. To allocate the finite resources efficiently, we cluster the preferred groups and non-preferred groups by the data envelopment analysis (DEA) approach. Through the scientific decision making approach, we can allocate R and D capacity, budget, and infrastructures efficiently to produce outstanding R and D outputs. (auth)

  12. A Contribution to Guide the Use of Support Tools for Technology Roadmapping: a Case Study in the Clothing Industry

    Directory of Open Access Journals (Sweden)

    Cindy Johanna Ibarra González

    2013-12-01

    Full Text Available This article presents guidelines regarding the use of tools to support technology roadmapping based on a case study of an exploratory and descriptive nature in a small company in the clothing sector. After introducing a systematic approach to technology roadmapping with their support tools, an empirical analysis is then presented of the application of the tools of the market layer – a questionnaire for consultation with the consumers and bibliographical research – and the business layer – SWOT matrix, through illustrative examples. Each tool was analyzed in relation to the complexity, time, cost of implementation, relevance and quality of the resulting information, the most common problems associated with their use. Here we show that the tools of the market layer proved to be easiest to use when compared with the tools of business layer, varying the time required, but involving, in general, a low cost in its application to obtain relevant and quality results for the development of the roadmap. Based on the results, general guidelines for the use of these tools to assist in the process of technology roadmapping were established as well as a comparison between the tools.

  13. Technology Roadmap: High-Efficiency, Low-Emissions Coal-Fired Power Generation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-07-01

    Coal is the largest source of power globally and, given its wide availability and relatively low cost, it is likely to remain so for the foreseeable future. The High-Efficiency, Low-Emissions Coal-Fired Power Generation Roadmap describes the steps necessary to adopt and further develop technologies to improve the efficiency of the global fleet of coal. To generate the same amount of electricity, a more efficient coal-fired unit will burn less fuel, emit less carbon, release less local air pollutants, consume less water and have a smaller footprint. High-efficiency, low emissions (HELE) technologies in operation already reach a thermal efficiency of 45%, and technologies in development promise even higher values. This compares with a global average efficiency for today’s fleet of coal-fired plants of 33%, where three-quarters of operating units use less efficient technologies and more than half is over 25 years old. A successful outcome to ongoing RD&D could see units with efficiencies approaching 50% or even higher demonstrated within the next decade. Generation from older, less efficient technology must gradually be phased out. Technologies exist to make coal-fired power generation much more effective and cleaner burning. Of course, while increased efficiency has a major role to play in reducing emissions, particularly over the next 10 years, carbon capture and storage (CCS) will be essential in the longer term to make the deep cuts in carbon emissions required for a low-carbon future. Combined with CCS, HELE technologies can cut CO2 emissions from coal-fired power generation plants by as much as 90%, to less than 100 grams per kilowatt-hour. HELE technologies will be an influential factor in the deployment of CCS. For the same power output, a higher efficiency coal plant will require less CO2 to be captured; this means a smaller, less costly capture plant; lower operating costs; and less CO2 to be transported and stored.

  14. Technology Roadmap: Energy and GHG reductions in the chemical industry via catalytic processes

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-06-01

    The chemical industry is a large energy user; but chemical products and technologies also are used in a wide array of energy saving and/or renewable energy applications so the industry has also an energy saving role. The chemical and petrochemical sector is by far the largest industrial energy user, accounting for roughly 10% of total worldwide final energy demand and 7% of global GHG emissions. The International Council of Chemical Associations (ICCA) has partnered with the IEA and DECHEMA (Society for Chemical Engineering and Biotechnology) to describe the path toward further improvements in energy efficiency and GHG reductions in the chemical sector. The roadmap looks at measures needed from the chemical industry, policymakers, investors and academia to press on with catalysis technology and unleash its potential around the globe. The report uncovers findings and best practice opportunities that illustrate how continuous improvements and breakthrough technology options can cut energy use and bring down greenhouse gas (GHG) emission rates. Around 90% of chemical processes involve the use of catalysts – such as added substances that increase the rate of reaction without being consumed by it – and related processes to enhance production efficiency and reduce energy use, thereby curtailing GHG emission levels. This work shows an energy savings potential approaching 13 exajoules (EJ) by 2050 – equivalent to the current annual primary energy use of Germany.

  15. Science and Technology (S and T) Roadmap Collaboration between SMC, NASA, and Government Partners

    Science.gov (United States)

    Betser, Joseph; Ewart, Roberta; Chandler, Faith

    2016-01-01

    National Security Space (NSS) presents multi-faceted S and T challenges. We must continually innovate enterprise and information management; provide decision support; develop advanced materials; enhance sensor technology; transform communication technology; develop advanced propulsion and resilient space architectures and capabilities; and enhance multiple additional S and T domains. These challenges are best met by leveraging advanced S and T research and technology development from a number of DoD agencies and civil agencies such as NASA. The authors of this paper have engaged in these activities since 2006 and over the past decade developed multiple strategic S and T relationships. This paper highlights the Office of the Space Missile Systems Center (SMC) Chief Scientist (SMC/ST) collaboration with the NASA Office of Chief Technologist (NASA OCT), which has multiple S and T activities that are relevant to NSS. In particular we discuss the development of the Technology Roadmaps that benefit both Civil Space and NSS. Our collaboration with NASA OCT has been of mutual benefit to multiple participants. Some of the other DoD components include the Defense Advanced Research Projects agency (DARPA), Air Force Research Laboratory (AFRL), Naval Research Laboratory (NRL), The USAF Office of Chief Scientist, the USAF Science Advisory Board (SAB), Space and Naval Warfare Systems Command (SPAWAR), and a number of other services and agencies. In addition, the human talent is a key enabler of advanced S and T activities; it is absolutely critical to have a strong supply of talent in the fields of Science Technology, Engineering, and Mathematics (STEM). Consequently, we continually collaborate with the USAF Institute of Technology (AFIT), other service academies and graduate schools, and other universities and colleges. This paper highlights the benefits that result from such strategic S and T partnerships and recommends a way forward that will continually build upon these

  16. Materials R and D for a timely DEMO: Key findings and recommendations of the EU Roadmap Materials Assessment Group

    Energy Technology Data Exchange (ETDEWEB)

    Stork, Derek, E-mail: derek.stork@ccfe.ac.uk [EFDA Power Plant Physics and Technology, Boltzmannstr. 2, Garching, 85748 Germany (Germany); Agostini, Pietro [ENEA, Brasimone Research Centre, 40032, Camugnano, Bologna (Italy); Boutard, Jean-Louis [CEA, cab HC, Saclay, F-91191, Gif-sur-Yvette (France); Buckthorpe, Derek [AMEC, Booths Park, Chelford Road, Knutsford, Cheshire, WA16 8QZ (United Kingdom); Diegele, Eberhard [Karlsruhe Institute for Technology, IMF-I, D-7602, Karlsruhe (Germany); Dudarev, Sergei L. [Euratom-CCFE Association, Culham Science Centre, Abingdon, OX14 3DB (United Kingdom); English, Colin [National Nuclear Laboratory, 5th Floor, Chadwick House, Warrington Road, Birchwood Park, WA3 6AE (United Kingdom); Federici, Gianfranco [EFDA Power Plant Physics and Technology, Boltzmannstr. 2, Garching, 85748 Germany (Germany); Gilbert, Mark R. [Euratom-CCFE Association, Culham Science Centre, Abingdon, OX14 3DB (United Kingdom); Gonzalez, Sehila [EFDA Power Plant Physics and Technology, Boltzmannstr. 2, Garching, 85748 Germany (Germany); Ibarra, Angel [CIEMAT, Avda. Complutense 40, Madrid (Spain); Linsmeier, Christian [Forschungszentrum Jülich GmbH, Institut für Energie- und Klimaforschung–Plasmaphysik, EURATOM Association, 52425 Jülich (Germany); Puma, Antonella Li [CEA, DEN, Saclay, DM2S, SERMA, F-91191, Gif-sur-Yvette (France); Marbach, Gabriel [CEA, cab HC, Saclay, F-91191, Gif-sur-Yvette (France); Packer, Lee W. [Euratom-CCFE Association, Culham Science Centre, Abingdon, OX14 3DB (United Kingdom); Raj, Baldev [Indian National Academy of Engineering, Shaheed Jeet Singh Marg, New Delhi 110016 (India); Rieth, Michael [Karlsruhe Institute for Technology, IMF-I, D-7602, Karlsruhe (Germany); Tran, Min Quang [Ecole Polytechnique Federale de Lausanne—CRPP, Association Euratom-Switzerland, 1015 Lausanne (Switzerland); and others

    2014-10-15

    The findings of the EU Fusion Programme's ‘Materials Assessment Group’ (MAG), assessing readiness of Structural, Plasma Facing (PF) and High Heat Flux (HHF) materials for DEMO, are discussed. These are incorporated into the EU Fusion Power Roadmap [1], with a decision to construct DEMO in the early 2030s. The methodology uses project-based and systems-engineering approaches, the concept of Technology Readiness Levels, and considers lessons learned from Fission reactor material development. ‘Baseline’ materials are identified for each DEMO role, and the DEMO mission risks analysed from the known limitations, or unknown properties, associated with each baseline material. R and D programmes to address these risks are developed. The DEMO assessed has a phase I with a ‘starter blanket’: the blanket must withstand ≥2 MW yr m{sup −2} fusion neutron flux (equivalent to ∼20 dpa front-wall steel damage). The baseline materials all have significant associated risks, so development of ‘Risk Mitigation Materials’ (RMM) is recommended. The R and D programme has parallel development of the baseline and RMM, up to ‘down-selection’ points to align with decisions on the DEMO blanket and divertor engineering definition. ITER licensing experience is used to refine the issues for materials nuclear testing, and arguments are developed to optimise scope of materials tests with fusion neutron (‘14 MeV’) spectra before DEMO design finalisation. Some 14 MeV testing is still essential, and the Roadmap requires deployment of a ≥30 dpa (steels) testing capability by 2026. Programme optimisation by the pre-testing with fission neutrons on isotopically- or chemically-doped steels and with ion-beams is discussed along with the minimum 14 MeV testing programme, and the key role which fundamental and mission-oriented modelling can play in orienting the research.

  17. RTS,S: Toward a first landmark on the Malaria Vaccine Technology Roadmap.

    Science.gov (United States)

    Kaslow, David C; Biernaux, Sophie

    2015-12-22

    The Malaria Vaccine Technology Roadmap calls for a 2015 landmark goal of a first-generation malaria vaccine that has protective efficacy against severe disease and death, lasting longer than one year. This review focuses on product development efforts over the last five years of RTS,S, a pre-erythrocytic, recombinant subunit, adjuvanted, candidate malaria vaccine designed with this goal of a first-generation malaria vaccine in mind. RTS,S recently completed a successful pivotal Phase III safety, efficacy and immunogenicity study. Although vaccine efficacy was found to be modest, a substantial number of cases of clinical malaria were averted over a 3-4 years period, particularly in settings of significant disease burden. European regulators have subsequently adopted a positive opinion under the Article 58 procedure for an indication of active immunization of children aged 6 weeks up to 17 months against malaria caused by Plasmodium falciparum and against hepatitis B. Further evaluations of the benefit, risk, feasibility and cost-effectiveness of RTS,S are now anticipated through policy and financing reviews at the global and national levels. Copyright © 2015. Published by Elsevier Ltd.

  18. Climate Change Mitigation Technologies: the Siemens Roadmap to Carbon Capture and Storage

    Energy Technology Data Exchange (ETDEWEB)

    Voges, K.

    2007-07-01

    A full range of technology options will have to be deployed until 2025 to get the global CO{sub 2} emissions on a 550 ppm stabilization track. The focus of the paper will be on Carbon Capture and Storage (CCS) as an indispensable part of a carbon constrained energy infrastructure. In CCS our main long term focus is clearly on coal based processes. For Greenfield applications Siemens is prioritizing IGCC based pre-combustion capture. Post-combustion capture is pursued for steam power plant retrofit. (a) IGCC with pre-combustion capture: A first F-class based demonstration plant could be available until 2014. The roadmap addresses gasifier scale up, hydrogen burner and turbine development and integration issues. Beyond that a bundle of further efficiency improvement measures will further enhance efficiency and economic competitiveness. (b) Post-combustion capture: The development aims at optimizing existing solvents or developing new ones and integrating the complete unit with its mass and heat interchange system into the power plant. (c) CO{sub 2} Compressors: For efficiency and operating flexibility reasons Siemens Power Generation prefers gear-type compressors instead of single shaft compressors. The improvement of maintainability and the reduced number of stages or corrosion protection are issues addressed in current R and D activities. (auth)

  19. Technology Development Roadmap for the Advanced High Temperature Reactor Secondary Heat Exchanger

    Energy Technology Data Exchange (ETDEWEB)

    P. Sabharwall; M. McCllar; A. Siahpush; D. Clark; M. Patterson; J. Collins

    2012-09-01

    This Technology Development Roadmap (TDRM) presents the path forward for deploying large-scale molten salt secondary heat exchangers (MS-SHX) and recognizing the benefits of using molten salt as the heat transport medium for advanced high temperature reactors (AHTR). This TDRM will aid in the development and selection of the required heat exchanger for: power production (the first anticipated process heat application), hydrogen production, steam methane reforming, methanol to gasoline production, or ammonia production. This TDRM (a) establishes the current state of molten salt SHX technology readiness, (b) defines a path forward that systematically and effectively tests this technology to overcome areas of uncertainty, (c) demonstrates the achievement of an appropriate level of maturity prior to construction and plant operation, and (d) identifies issues and prioritizes future work for maturing the state of SHX technology. This study discusses the results of a preliminary design analysis of the SHX and explains the evaluation and selection methodology. An important engineering challenge will be to prevent the molten salt from freezing during normal and off-normal operations because of its high melting temperature (390°C for KF ZrF4). The efficient transfer of energy for industrial applications depends on the ability to incorporate cost-effective heat exchangers between the nuclear heat transport system and industrial process heat transport system. The need for efficiency, compactness, and safety challenge the capabilities of existing heat exchanger technology. The description of potential heat exchanger configurations or designs (such as printed circuit, spiral or helical coiled, ceramic, plate and fin, and plate type) were covered in an earlier report (Sabharwall et al. 2011). Significant future work, much of which is suggested in this report, is needed before the benefits and full potential of the AHTR can be realized. The execution of this TDRM will focuses

  20. A Technology Development Roadmap for a Near-Term Probe-Class X-ray Astrophysics Mission

    Science.gov (United States)

    Daelemans, Gerard J.; Petre, Robert; Bookbinder, Jay; Ptak, Andrew; Smith, Randall

    2013-01-01

    This document presents a roadmap, including proposed budget and schedule, for maturing the instrumentation needed for an X-ray astrophysics Probe-class mission. The Physics of the Cosmos (PCOS) Program Office was directed to create this roadmap following the December 2012 NASA Astrophysics Implementation Plan (AIP). Definition of this mission is called for in the AIP, with the possibility of selection in 2015 for a start in 2017. The overall mission capabilities and instrument performance requirements were defined in the 2010 Astronomy and Astrophysics Decadal Survey report, New Worlds, New Horizons in Astronomy and Astrophysics (NWNH), in connection with the highly ranked International X-ray Observatory (IXO). In NWNH, recommendations were provided regarding the size of, and instrumentation needed by, the next large X-ray observatory. Specifically, the key instrumental capability would be an X-ray calorimeter spectrometer at the focus of a large mirror with angular resolution of 10 arc seconds (arcsec) or better. If possible, a grating spectrometer should also be incorporated into the instrument complement. In response to these recommendations, four instrumentation technologies are included in this roadmap. Three of these are critical for an X-ray mission designed to address NWNH questions: segmented X-ray mirrors, transition edge sensor calorimeters, and gratings. Two approaches are described for gratings, which represent the least mature technology and thus most in need of a parallel path for risk reduction. Also, while current CCD detectors would likely meet the mission needs for grating spectrum readout, specific improvements are included as an additional approach for achieving the grating system effective area requirement. The technical steps needed for these technologies to attain technology readiness levels (TRL) of 5 and 6 are described, as well as desirable modest risk reduction steps beyond TRL-6. All of the technology development efforts are currently

  1. The GRIP method for collaborative roadmapping workshops

    DEFF Research Database (Denmark)

    Piirainen, Kalle

    2015-01-01

    Technology roadmapping is a well-known tool for technology management, but practical advice for facilitating collaborative roadmapping workshops is relatively scarce. To cater for this need, we have designed a method for collaborative roadmapping, dubbed the GRIP method, for facilitating group work...

  2. Technology assessments

    International Nuclear Information System (INIS)

    Rohwer, P.S.; Anderson, D.L.; Christian, D.J.

    1978-01-01

    Theoretical studies in assessment methodology have concentrated in the past year on computerization of state-of-the-art models for internal radiation dosimetry and development and evaluation of environmental transport models. Methodology applications continued to cover a broad spectrum of radiation exposure scenarios. Potential exposure situations requiring assessment arise from assorted deployments of all parts of nuclear fuel cycles, including comparisons of alternative uranium and thorium based cycles, and preliminary evaluations of advanced reactor fuel concepts. Measurements and samples were collected characterizing and documenting the current radiological status of formerly used Manhattan Engineer District/Atomic Energy Commission (MED/AEC) sites. This survey program encompasses research activities in the areas of survey design, instrumentation development, sample analysis, and data reduction and analysis. Other laboratory activities within TAS center around the unique capabilities of the Health Physics Research Reactor (HPRR) as an irradiation source. Typically the HPRR was involved in testing and intercomparison of dosimetry and criticality alarm systems and in exposure of physical and biological experiments

  3. Education Roadmap for Mining Professionals

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2002-12-01

    This document represents the roadmap for education in the U.S. mining industry. It was developed based on the results of an Education Roadmap Workshop sponsored by the National Mining Association in conjunction with the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Office of Industrial Technologies. The Workshop was held February 23, 2002 in Phoenix, Arizona.

  4. The technology roadmap for plant/crop-based renewable resources 2020

    Energy Technology Data Exchange (ETDEWEB)

    McLaren, J.

    1999-02-22

    The long-term well-being of the nation and maintenance of a sustainable leadership position in agriculture, forestry, and manufacturing, clearly depend on current and near-term support of multidisciplinary research for the development of a reliable renewable resource base. This document sets a roadmap and priorities for that research. America needs leadership that will continue to recognize, support, and move rapidly to meet the need to expand the use of sustainable renewable resources. This roadmap has highlighted potential ways for progress and has identified goals in specific components of the system. Achieving success with these goals will provide the opportunity to hit the vision target of a fivefold increase in renewable resource use by 2020.

  5. The Technology Roadmap for Plant/Crop-Based Renewable Resources 2020

    Energy Technology Data Exchange (ETDEWEB)

    None

    1999-02-01

    The long-term well-being of the nation and maintenance of a sustainable leadership position in agriculture, forestry, and manufacturing, clearly depend on current and near-term support of multidisciplinary research for the development of a reliable renewable resource base. This document sets a roadmap and priorities for that research. America needs leadership that will continue to recognize, support, and move rapidly to meet the need to expand the use of sustainable renewable resources. This roadmap has highlighted potential ways for progress and has identified goals in specific components of the system. Achieving success with these goals will provide the opportunity to hit the vision target of a fivefold increase in renewable resource use by 2020.

  6. A National contribution to the GEO Science and Technology roadmap: GIIDA Project

    Science.gov (United States)

    Nativi, Stefano; Mazzetti, Paolo; Guzzetti, Fausto; Oggioni, Alessandro; Pirrone, Nicola; Santolieri, Rosalia; Viola, Angelo; Tartari, Gianni; Santoro, Mattia

    2010-05-01

    The GIIDA (Gestione Integrata e Interoperativa dei Dati Ambientali) project is an initiative of the Italian National Research Council (CNR) launched in 2008 as an inter-departmental project, aiming to design and develop a multidisciplinary e-infrastructure (cyber-infrastructure) for the management, processing, and evaluation of Earth and Environmental resources -i.e. data, services, models, sensors, best practices. GIIDA has been contributing to the implementation of the GEO (Group of Earth Observation) Science and Technology (S&T) roadmap by: (a) linking relevant S&T communities to GEOSS (GEO System of Systems); (b) ensuring that GEOSS is built based on state-of-the-art science and technology. GIIDA co-ordinates the CNR's digital infrastructure development for Earth Observation resources sharing and cooperates with other national agencies and existing projects pursuing the same objective. For the CNR, GIIDA provides an interface to European and international interoperability programmes (e.g. INSPIRE, and GMES). It builds a national network for dialogue and resolution of issues at varying scientific and technical levels. To achieve such goals, GIIDA introduced a set of guidance principles: • To shift from a "traditional" data centric approach to a more advanced service-based solution for Earth System Science and Environmental information. • To shift the focus from Data to Information Spatial Infrastructures in order to support decision-making. • To be interoperable with analogous National (e.g. SINAnet, and the INSPIRE National Infrastructure) and international initiatives (e.g. INSPIRE, GMES, SEIS, and GEOSS). • To reinforce the Italian presence in the European and international programmes concerning digital infrastructures, geospatial information, and the Mega-Science approach. • To apply the National and International Information Technology (IT) standards for achieving multi-disciplinary interoperability in the Earth and Space Sciences (e.g. ISO, OGC

  7. The biopharmaceutics risk assessment roadmap for optimizing clinical drug product performance.

    Science.gov (United States)

    Selen, Arzu; Dickinson, Paul A; Müllertz, Anette; Crison, John R; Mistry, Hitesh B; Cruañes, Maria T; Martinez, Marilyn N; Lennernäs, Hans; Wigal, Tim L; Swinney, David C; Polli, James E; Serajuddin, Abu T M; Cook, Jack A; Dressman, Jennifer B

    2014-11-01

    The biopharmaceutics risk assessment roadmap (BioRAM) optimizes drug product development and performance by using therapy-driven target drug delivery profiles as a framework to achieve the desired therapeutic outcome. Hence, clinical relevance is directly built into early formulation development. Biopharmaceutics tools are used to identify and address potential challenges to optimize the drug product for patient benefit. For illustration, BioRAM is applied to four relatively common therapy-driven drug delivery scenarios: rapid therapeutic onset, multiphasic delivery, delayed therapeutic onset, and maintenance of target exposure. BioRAM considers the therapeutic target with the drug substance characteristics and enables collection of critical knowledge for development of a dosage form that can perform consistently for meeting the patient's needs. Accordingly, the key factors are identified and in vitro, in vivo, and in silico modeling and simulation techniques are used to elucidate the optimal drug delivery rate and pattern. BioRAM enables (1) feasibility assessment for the dosage form, (2) development and conduct of appropriate "learning and confirming" studies, (3) transparency in decision-making, (4) assurance of drug product quality during lifecycle management, and (5) development of robust linkages between the desired clinical outcome and the necessary product quality attributes for inclusion in the quality target product profile. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

  8. EV Charging Infrastructure Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Karner, Donald [Electric Transportation Inc., Rogers, AR (United States); Garetson, Thomas [Electric Transportation Inc., Rogers, AR (United States); Francfort, Jim [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-08-01

    As highlighted in the U.S. Department of Energy’s EV Everywhere Grand Challenge, vehicle technology is advancing toward an objective to “… produce plug-in electric vehicles that are as affordable and convenient for the average American family as today’s gasoline-powered vehicles …” [1] by developing more efficient drivetrains, greater battery energy storage per dollar, and lighter-weight vehicle components and construction. With this technology advancement and improved vehicle performance, the objective for charging infrastructure is to promote vehicle adoption and maximize the number of electric miles driven. The EV Everywhere Charging Infrastructure Roadmap (hereafter referred to as Roadmap) looks forward and assumes that the technical challenges and vehicle performance improvements set forth in the EV Everywhere Grand Challenge will be met. The Roadmap identifies and prioritizes deployment of charging infrastructure in support of this charging infrastructure objective for the EV Everywhere Grand Challenge

  9. CMMI Roadmaps

    National Research Council Canada - National Science Library

    Cannegieter, Jan J; Heijstek, Andre; Linders, Ben; Solingen, Rini van

    2008-01-01

    .... The Dutch Software Process Improvement (SPIder) network convened a workshop in November 2006 to develop several CMMI roadmaps for the continuous representation, each with a specific set of improvement goals...

  10. A methodological combined framework for roadmapping biosensor research: a fault tree analysis approach within a strategic technology evaluation frame.

    Science.gov (United States)

    Siontorou, Christina G; Batzias, Fragiskos A

    2014-03-01

    Biosensor technology began in the 1960s to revolutionize instrumentation and measurement. Despite the glucose sensor market success that revolutionized medical diagnostics, and artificial pancreas promise currently the approval stage, the industry is reluctant to capitalize on other relevant university-produced knowledge and innovation. On the other hand, the scientific literature is extensive and persisting, while the number of university-hosted biosensor groups is growing. Considering the limited marketability of biosensors compared to the available research output, the biosensor field has been used by the present authors as a suitable paradigm for developing a methodological combined framework for "roadmapping" university research output in this discipline. This framework adopts the basic principles of the Analytic Hierarchy Process (AHP), replacing the lower level of technology alternatives with internal barriers (drawbacks, limitations, disadvantages), modeled through fault tree analysis (FTA) relying on fuzzy reasoning to count for uncertainty. The proposed methodology is validated retrospectively using ion selective field effect transistor (ISFET) - based biosensors as a case example, and then implemented prospectively membrane biosensors, putting an emphasis on the manufacturability issues. The analysis performed the trajectory of membrane platforms differently than the available market roadmaps that, considering the vast industrial experience in tailoring and handling crystallic forms, suggest the technology path of biomimetic and synthetic materials. The results presented herein indicate that future trajectories lie along with nanotechnology, and especially nanofabrication and nano-bioinformatics, and focused, more on the science-path, that is, on controlling the natural process of self-assembly and the thermodynamics of bioelement-lipid interaction. This retained the nature-derived sensitivity of the biosensor platform, pointing out the differences

  11. Hanford Site Secondary Waste Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Westsik, Joseph H.

    2009-01-29

    Summary The U.S. Department of Energy (DOE) is making plans to dispose of 54 million gallons of radioactive tank wastes at the Hanford Site near Richland, Washington. The high-level wastes and low-activity wastes will be vitrified and placed in permanent disposal sites. Processing of the tank wastes will generate secondary wastes, including routine solid wastes and liquid process effluents, and these need to be processed and disposed of also. The Department of Energy Office of Waste Processing sponsored a meeting to develop a roadmap to outline the steps necessary to design the secondary waste forms. Representatives from DOE, the U.S. Environmental Protection Agency, the Washington State Department of Ecology, the Oregon Department of Energy, Nuclear Regulatory Commission, technical experts from the DOE national laboratories, academia, and private consultants convened in Richland, Washington, during the week of July 21-23, 2008, to participate in a workshop to identify the risks and uncertainties associated with the treatment and disposal of the secondary wastes and to develop a roadmap for addressing those risks and uncertainties. This report describes the results of the roadmap meeting in Richland. Processing of the tank wastes will generate secondary wastes, including routine solid wastes and liquid process effluents. The secondary waste roadmap workshop focused on the waste streams that contained the largest fractions of the 129I and 99Tc that the Integrated Disposal Facility risk assessment analyses were showing to have the largest contribution to the estimated IDF disposal impacts to groundwater. Thus, the roadmapping effort was to focus on the scrubber/off-gas treatment liquids with 99Tc to be sent to the Effluent Treatment Facility for treatment and solidification and the silver mordenite and carbon beds with the captured 129I to be packaged and sent to the IDF. At the highest level, the secondary waste roadmap includes elements addressing regulatory and

  12. Hydrogen Production Technical Team Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-06-01

    The Hydrogen Production Technical Team Roadmap identifies research pathways leading to hydrogen production technologies that produce near-zero net greenhouse gas (GHG) emissions from highly efficient and diverse renewable energy sources. This roadmap focuses on initial development of the technologies, identifies their gaps and barriers, and describes activities by various U.S. Department of Energy (DOE) offices to address the key issues and challenges.

  13. Energia solar fotovoltaica: Contributo para um roadmapping do seu desenvolvimento tecnológico [Fotovoltaic solar energy: a contribute to a technological development roadmapping

    OpenAIRE

    Hugo Gil Silva; Marcos Afonso

    2009-01-01

    The main goal for this report is to alert for the need of a continuous investment in policies that should be developed worldwide, with respect to research and development (R&D), at all levels, in photovoltaic energy. The R&D in this area leads to a strong and possible solution to the actual environmental problems. Such problems are based on the climate change due to polluted gas emissions and due to the non-renewable resources exhaustion. Therefore, this contribution for a roadmap of photovol...

  14. Assessing Teacher Technology Skills.

    Science.gov (United States)

    Anderson, Mary Alice

    2000-01-01

    Advocates the assessment of teachers' technology skills by school media and technology specialists who are involved in staff training. Discusses what should be assessed, including level of curricular integration and attitudes; assessment objectives; informal assessments; formal assessments; assessment tools; and administrators as role models for…

  15. Next Generation Nuclear Plant Project Technology Development Roadmaps: The Technical Path Forward for 750–800°C Reactor Outlet Temperature

    Energy Technology Data Exchange (ETDEWEB)

    John Collins

    2009-08-01

    This document presents the NGNP Critical PASSCs and defines their technical maturation path through Technology Development Roadmaps (TDRMs) and their associated Technology Readiness Levels (TRLs). As the critical PASSCs advance through increasing levels of technical maturity, project risk is reduced and the likelihood of within-budget and on-schedule completion is enhanced. The current supplier-generated TRLs and TDRMs for a 750–800°C reactor outlet temperature (ROT) specific to each supplier are collected in Appendix A.

  16. Technology assessment using NBIC convergence

    International Nuclear Information System (INIS)

    Vaseashta, Ashok

    2009-01-01

    Technologies' has considerably influenced scientific and social thinking about the future, there are several active debates in progress. The first being about the future of technologies and their relations to humans as nanoscale materials and systems provide the means to probe cells and provide basis for human performance augmentation - hence contributing to the formation of political and public opinion on societal aspects of science and technology. Such debates have lead to socio-political and ethical issues that transcend academic disciplinary borders that are rooted outside of the scientific arena. Thus it necessitates, inter- and often trans-disciplinary research to contribute effectively to these formative process. Such concerns are independently addressed using studies relating to toxicology, fate, transport, and bioavailability of nanomaterials, as well as human exposures to these materials. On another front, the debate is on the future of the scientific disciplines and visions about technological developments. Such predictions often relate to human way of life, environmental and international security, and are used by scientists, engineers, managers, policymakers, media, philosophers and authors - all with different interpretations. We present balanced, yet strategic assessments and recommendations of revolutionary scientific breakthroughs in multidisciplinary environments based on the NBIC convergence approach. Technology roadmaps are cautiously formulated based on extensive research, expert elicitation, and networking approaches to project 'future scenarios' realistically and epistemologically. Such roadmaps enable development of transformative tools and methodologies that fill fundamental knowledge gaps, and change culture in academia to foster collaboration, thus providing unique solutions. It is expected that the synergy arising from converging technologies and research methodologies at the IASC will leverage emerging and potentially transformative studies. The

  17. Assessment of needs and research roadmaps for rechargeable energy storage system (RESS) onboard electric drive buses

    Science.gov (United States)

    2010-12-01

    In support of the Federal Transit Administration (FTA) Electric Drive Strategic Plan (EDSP), this report assesses state-of-art advances in lithium-ion batteries, ultracapacitors, and related power management and control technologies for the rechargea...

  18. Technology roadmapping, uma alternativa no delineamento da pesquisa agropecuária e sua aplicação na cadeia de cenoura Technology roadmapping, an alternative for designing agricultural research and its application on the carrot chain

    Directory of Open Access Journals (Sweden)

    Silvia S Onoyama

    2012-12-01

    Full Text Available Este trabalho tem como objetivo discutir a aplicação do método "Technology roadmapping" (TRM na definição da programação de pesquisa da cadeia de cenoura da Embrapa Hortaliças, considerando um horizonte de 15 anos. Esta cadeia produtiva foi escolhida por ser a cenoura uma das olerícolas de maior importância socioeconômica do Brasil, pelo histórico de projetos da Embrapa Hortaliças com impactos positivos nesta cadeia e pela motivação da equipe em realizar estudos prospectivos para identificar demandas reais e potenciais de pesquisa à cultura. A aplicação do TRM obedeceu a seguinte ordem cronológica: 1 definição do escopo do estudo prospectivo; 2 entedimento do contexto da cadeia de valor da cenoura para facilitar o processo de adaptação do TRM; 3 estabelecimento do modelo conceitual do roadmapping adaptado da representação gráfica básica com quatro macrocamadas indicadoras: mercado, negócio, linhas de pesquisa e recursos (físico, financeiro, humano e competências; 4 realização de pesquisas em fontes primárias e secundárias com produtores, atacadistas, empresas de semente, supermercados, processadoras, consumidores e pesquisadores; e 5 realização de workshop com parceiros externos e colaboradores e reuniões posteriores com os grupos temáticos para a construção do mapa da rota tecnológica. A aplicação do TRM, do ponto de vista gerencial, possibilitou um levantamento atualizado da realidade da cadeia produtiva de cenoura no Brasil e a explicitação clara de ações de pesquisa visando a atender as demandas priorizadas desta cadeia. Contemplou ainda a verificação dos recursos humanos e materiais necessários para atender as ações de pesquisa distribuídas no tempo. Na esfera científica, constatou-se a flexibilidade do método ao ser aplicado com sucesso no setor olerícola, podendo se extender para as demais cadeias de hortaliças bem como do agronegócio.This study aimed to present the application of

  19. The 2017 Magnetism Roadmap

    Science.gov (United States)

    Sander, D.; Valenzuela, S. O.; Makarov, D.; Marrows, C. H.; Fullerton, E. E.; Fischer, P.; McCord, J.; Vavassori, P.; Mangin, S.; Pirro, P.; Hillebrands, B.; Kent, A. D.; Jungwirth, T.; Gutfleisch, O.; Kim, C. G.; Berger, A.

    2017-09-01

    Building upon the success and relevance of the 2014 Magnetism Roadmap, this 2017 Magnetism Roadmap edition follows a similar general layout, even if its focus is naturally shifted, and a different group of experts and, thus, viewpoints are being collected and presented. More importantly, key developments have changed the research landscape in very relevant ways, so that a novel view onto some of the most crucial developments is warranted, and thus, this 2017 Magnetism Roadmap article is a timely endeavour. The change in landscape is hereby not exclusively scientific, but also reflects the magnetism related industrial application portfolio. Specifically, Hard Disk Drive technology, which still dominates digital storage and will continue to do so for many years, if not decades, has now limited its footprint in the scientific and research community, whereas significantly growing interest in magnetism and magnetic materials in relation to energy applications is noticeable, and other technological fields are emerging as well. Also, more and more work is occurring in which complex topologies of magnetically ordered states are being explored, hereby aiming at a technological utilization of the very theoretical concepts that were recognised by the 2016 Nobel Prize in Physics. Given this somewhat shifted scenario, it seemed appropriate to select topics for this Roadmap article that represent the three core pillars of magnetism, namely magnetic materials, magnetic phenomena and associated characterization techniques, as well as applications of magnetism. While many of the contributions in this Roadmap have clearly overlapping relevance in all three fields, their relative focus is mostly associated to one of the three pillars. In this way, the interconnecting roles of having suitable magnetic materials, understanding (and being able to characterize) the underlying physics of their behaviour and utilizing them for applications and devices is well illustrated, thus giving an

  20. The 2017 Magnetism Roadmap

    International Nuclear Information System (INIS)

    Sander, D; Valenzuela, S O; Makarov, D

    2017-01-01

    Building upon the success and relevance of the 2014 Magnetism Roadmap, this 2017 Magnetism Roadmap edition follows a similar general layout, even if its focus is naturally shifted, and a different group of experts and, thus, viewpoints are being collected and presented. More importantly, key developments have changed the research landscape in very relevant ways, so that a novel view onto some of the most crucial developments is warranted, and thus, this 2017 Magnetism Roadmap article is a timely endeavour. The change in landscape is hereby not exclusively scientific, but also reflects the magnetism related industrial application portfolio. Specifically, Hard Disk Drive technology, which still dominates digital storage and will continue to do so for many years, if not decades, has now limited its footprint in the scientific and research community, whereas significantly growing interest in magnetism and magnetic materials in relation to energy applications is noticeable, and other technological fields are emerging as well. Also, more and more work is occurring in which complex topologies of magnetically ordered states are being explored, hereby aiming at a technological utilization of the very theoretical concepts that were recognised by the 2016 Nobel Prize in Physics. Given this somewhat shifted scenario, it seemed appropriate to select topics for this Roadmap article that represent the three core pillars of magnetism, namely magnetic materials, magnetic phenomena and associated characterization techniques, as well as applications of magnetism. While many of the contributions in this Roadmap have clearly overlapping relevance in all three fields, their relative focus is mostly associated to one of the three pillars. In this way, the interconnecting roles of having suitable magnetic materials, understanding (and being able to characterize) the underlying physics of their behaviour and utilizing them for applications and devices is well illustrated, thus giving an

  1. U.S. Department of Energy Roadmap on Instrumentation, Controls, and Human-Machine Interface Technologies in Current and Future Nuclear Power Plants

    International Nuclear Information System (INIS)

    Holcomb, David Eugene

    2007-01-01

    The U.S. Department of Energy (DOE) Office of Nuclear Energy (NE) recently sponsored the creation of a roadmap for instrumentation, controls, and human-machine interface (ICHMI) technology development. The roadmap represents the collective efforts of a group of subject matter experts from the DOE national laboratories, academia, vendors, the U.S. Nuclear Regulatory Commission (NRC), and utilities. It is intended to provide the underpinnings to the government sponsored ICHMI research, development, and demonstration (RD and D) performed in the United States for the next several years. A distinguishing feature of this roadmapping effort is that it is not limited to a technology progression plan but includes a detailed rationale, aimed at the nonspecialist, for the existence of a focused ICHMI RD and D program. Eight specific technology areas were identified for focused RD and D as follows: (1) sensors and electronics for harsh environments,(2) uncertainty characterization for diagnostics/prognostics applications, (3) quantification of software quality for high-integrity digital applications, (4) intelligent controls for nearly autonomous operation of advanced nuclear plants, (5) plant network architecture, (6) intelligent aiding technology for operational support, (7) human system interaction models and analysis tools, and (8) licensing and regulatory challenges and solutions.

  2. Preparation of a technology development roadmap for the Accelerator Transmutation of Waste (ATW) System : report of the ATW separations technologies and waste forms technical working group.

    Energy Technology Data Exchange (ETDEWEB)

    Collins, E.; Duguid, J.; Henry, R.; Karell, E.; Laidler, J.; McDeavitt, S.; Thompson, M.; Toth, M.; Williamson, M.; Willit, J.

    1999-08-12

    In response to a Congressional mandate to prepare a roadmap for the development of Accelerator Transmutation of Waste (ATW) technology, a Technical Working Group comprised of members from various DOE laboratories was convened in March 1999 for the purpose of preparing that part of the technology development roadmap dealing with the separation of certain radionuclides for transmutation and the disposal of residual radioactive wastes from these partitioning operations. The Technical Working Group for ATW Separations Technologies and Waste Forms completed its work in June 1999, having carefully considered the technology options available. A baseline process flowsheet and backup process were identified for initial emphasis in a future research, development and demonstration program. The baseline process combines aqueous and pyrochemical processes to permit the efficient separation of the uranium, technetium, iodine and transuranic elements from the light water reactor (LWR) fuel in the head-end step. The backup process is an all- pyrochemical system. In conjunction with the aqueous process, the baseline flowsheet includes a pyrochemical process to prepare the transuranic material for fabrication of the ATW fuel assemblies. For the internal ATW fuel cycle the baseline process specifies another pyrochemical process to extract the transuranic elements, Tc and 1 from the ATW fuel. Fission products not separated for transmutation and trace amounts of actinide elements would be directed to two high-level waste forms, one a zirconium-based alloy and the other a glass/sodalite composite. Baseline cost and schedule estimates are provided for a RD&D program that would provide a full-scale demonstration of the complete separations and waste production flowsheet within 20 years.

  3. Industry-driven sector roadmaps 2020

    DEFF Research Database (Denmark)

    Ricard, Lykke Margot

    Industri-driven sector roadmaps 2020: European Technology Platforms in wind and CCS. A new corporate trend on innovation in Europe, supported by The European Commission.......Industri-driven sector roadmaps 2020: European Technology Platforms in wind and CCS. A new corporate trend on innovation in Europe, supported by The European Commission....

  4. Technology Roadmap Instrumentation, Control, and Human-Machine Interface to Support DOE Advanced Nuclear Energy Programs

    Energy Technology Data Exchange (ETDEWEB)

    Donald D Dudenhoeffer; Burce P Hallbert

    2007-03-01

    Instrumentation, Controls, and Human-Machine Interface (ICHMI) technologies are essential to ensuring delivery and effective operation of optimized advanced Generation IV (Gen IV) nuclear energy systems. In 1996, the Watts Bar I nuclear power plant in Tennessee was the last U.S. nuclear power plant to go on line. It was, in fact, built based on pre-1990 technology. Since this last U.S. nuclear power plant was designed, there have been major advances in the field of ICHMI systems. Computer technology employed in other industries has advanced dramatically, and computing systems are now replaced every few years as they become functionally obsolete. Functional obsolescence occurs when newer, more functional technology replaces or supersedes an existing technology, even though an existing technology may well be in working order.Although ICHMI architectures are comprised of much of the same technology, they have not been updated nearly as often in the nuclear power industry. For example, some newer Personal Digital Assistants (PDAs) or handheld computers may, in fact, have more functionality than the 1996 computer control system at the Watts Bar I plant. This illustrates the need to transition and upgrade current nuclear power plant ICHMI technologies.

  5. Roadmapping - A Systematic Approach to Overcoming NGNP Challenges

    International Nuclear Information System (INIS)

    John W. Collins

    2008-01-01

    Changing requirements, programmatic challenges, and technical risk hinder even the best projects. The Next Generation Nuclear Plant (NGNP) is a complex project with technical and programmatic uncertainty. This paper presents the path forward, methods, and tools used to understand the requirements, manage the uncertainty, and mitigate the risk for the NGNP project. The key tool, technology development roadmaps, is described in detail as a means to facilitate NGNP risk-informed decision making, technology down selection, and technology qualification and maturation. Technology roadmaps for each NGNP System, Structure, or Component (SSC) were developed to set the vision for and drive the needed actions to down select technologies and designs; to assure technology readiness is demonstrated through testing, modeling, piloting, and prototyping; and to develop the test plans required to provide demonstrable evidence of the technology maturation required for codification and qualification. In the NGNP application, technology roadmaps provide the framework and structure required to systematically perform decision analysis, reduce risk, and mature technologies in a cost effective and timely manner. The steps followed include Structure Identification, Technology Readiness Assessment, Technology Selection, Technology Maturation, and Test Plan Development

  6. Building a Roadmap for the Biomaterials Science and Technology to Serve Military Needs

    National Research Council Canada - National Science Library

    Kohn, Joachim; Kantor, Carole; Devore, David

    2005-01-01

    In order to develop a requirements document detailing the medical product needs of the military that could be enabled by biomaterials technologies, we conducted a planning conference on February 2-4...

  7. Next Generation Nuclear Plant Project Technology Development Roadmaps: The Technical Path Forward

    Energy Technology Data Exchange (ETDEWEB)

    John Collins

    2009-01-01

    This document presents the Next Generation Nuclear Plant (NGNP) Systems, Subsystems, and Components, establishes a baseline for the current technology readiness status, and provides a path forward to achieve increasing levels of technical maturity.

  8. Roadmap for RFID Implementation in Central library, PEC University of Technology

    OpenAIRE

    Vasishta, Seema

    2009-01-01

    This paper gives brief idea about the emerging Radio Frequency Identification (RFID) technology, its importance in the library management system and its working. It also describes about the basic and optional components required for smooth working of the exercise. The aim is to consider how to extend RFID applications in an academic library keeping in view the scantiness of funds and scarcity of supporting staff. The article also illustrates a vivid picture about how RFID technology is acting...

  9. Selecting, Managing, and Marketing Technologies. The Practicing Administrator's Leadership Series. Roadmaps to Success.

    Science.gov (United States)

    Mckenzie, Jamieson A.

    This book argues for a comprehensive approach to planning for and managing the use of technology in schools. In the first four chapters, emphasis is placed on the importance of: (1) anticipating the future; (2) creating stakeholders' planning committees; (3) providing staff development and training for teachers and administrators; (4) winning…

  10. The NASA Astrobiology Roadmap.

    Science.gov (United States)

    Des Marais, David J; Nuth, Joseph A; Allamandola, Louis J; Boss, Alan P; Farmer, Jack D; Hoehler, Tori M; Jakosky, Bruce M; Meadows, Victoria S; Pohorille, Andrew; Runnegar, Bruce; Spormann, Alfred M

    2008-08-01

    The NASA Astrobiology Roadmap provides guidance for research and technology development across the NASA enterprises that encompass the space, Earth, and biological sciences. The ongoing development of astrobiology roadmaps embodies the contributions of diverse scientists and technologists from government, universities, and private institutions. The Roadmap addresses three basic questions: how does life begin and evolve, does life exist elsewhere in the universe, and what is the future of life on Earth and beyond? Seven Science Goals outline the following key domains of investigation: understanding the nature and distribution of habitable environments in the universe, exploring for habitable environments and life in our own Solar System, understanding the emergence of life, determining how early life on Earth interacted and evolved with its changing environment, understanding the evolutionary mechanisms and environmental limits of life, determining the principles that will shape life in the future, and recognizing signatures of life on other worlds and on early Earth. For each of these goals, Science Objectives outline more specific high priority efforts for the next three to five years. These eighteen objectives are being integrated with NASA strategic planning.

  11. Roadmap for Research, Development, and Demonstration of Instrumentation, Controls, and Human-Machine Interface Technologies

    International Nuclear Information System (INIS)

    Miller, Don W.; Arndt, Steven A.; Bond, Leonard J.; Dudenhoeffer, Donald D.; Hallbert, Bruce P.; Holcomb, David E.; Wood, Richard T.; Naser, Joseph A.; O'Hara, John M.; Quinn, Edward L.

    2008-01-01

    Instrumentation, controls, and human-machine interfaces are essential enabling technologies that strongly influence nuclear power plant performance and operational costs. The nuclear power industry is currently engaged in a transition from traditional analog-based instrumentation, controls, and human-machine interface (ICHMI) systems to implementations employing digital technologies. This transition has primarily occurred in an ad hoc fashion through individual system upgrades at existing plants and has been constrained by a number of concerns. Although international implementation of evolutionary nuclear power plants and the progression toward new plants in the United States have spurred design of more fully digital plant-wide ICHMI systems, the experience base in the nuclear power application domain is limited. Additionally, design and development programs by the U.S. Department of Energy (DOE) for advanced reactor concepts, such as the Generation IV Program and Next Generation Nuclear Plant (NGNP), introduce different plant conditions and unique plant configurations that increase the need for enhanced ICHMI capabilities to fully achieve programmatic goals related to economic competitiveness, safety and reliability, sustainability, and proliferation resistance and physical protection. As a result, there are challenges that need to be addressed to enable the nuclear power industry to effectively and efficiently complete the transition to safe and comprehensive use of digital technology

  12. Superconducting Technology Assessment

    National Research Council Canada - National Science Library

    2005-01-01

    This Superconducting Technology Assessment (STA) has been conducted by the National Security Agency to address the fundamental question of a potential replacement for silicon complementary metal oxide semiconductor (CMOS...

  13. Instrumentation and control and human machine interface science and technology Road-map in support of advanced reactors and fuel programs in the U.S

    International Nuclear Information System (INIS)

    Miller, D. W.; Arndt, S. A.; Dudenhoeffer, D.; Hallbert, B.; Bond, L. J.; Holcomb, D. E.; Wood, R. T.; Naser, J. A.; O'Hara, J.; Quinn, E. L.

    2008-01-01

    The purpose of this paper is to provide an overview of the current status of the Instrumentation, Control and Human Machine Interface (ICHMI) Science and Technology Road-map (Reference xi) that was developed to address the major challenges in this technical area for the Gen IV and other U.S. Department of Energy (DOE) initiatives that support future deployments of nuclear energy systems. Reliable, capable ICHMI systems will be necessary for the advanced nuclear plants to be economically competitive. ICHMI enables measurement, control, protection, monitoring, and maintenance for processes and components. Through improvements in the technologies and demonstration of their use to facilitate licensing, ICHMI can contribute to the reduction of plant operations and maintenance costs while helping to ensure high plant availability. The impact of ICHMI can be achieved through effective use of the technologies to improve operational efficiency and optimize use of human resources. However, current licensing experience with digital I and C systems has provided lessons learned concerning the difficulties that can be encountered when introducing advanced technologies with expanded capabilities. Thus, in the development of advanced nuclear power designs, it will be important to address both the technical foundations of ICHMI systems and their licensing considerations. The ICHMI Road-map will identify the necessary research, development and demonstration activities that are essential to facilitate necessary technology advancement and resolve outstanding issues. (authors)

  14. Instrumentation and control and human machine interface science and technology road-map in support of advanced reactors and fuel programs in the U.S

    International Nuclear Information System (INIS)

    Miller, D. W.; Arndt, S. A.; Bond, L. J.; Dudenhoeffer, D.; Hallbert, B.; Holcomb, D. E.; Wood, R. T.; Naser, J. A.; O'Hara, J.; Quinn, E. L.

    2006-01-01

    The purpose of this paper is to provide an overview of the current status of the Instrumentation, Control and Human Machine Interface (ICHMI) Science and Technology road-map being developed to address the major challenges in this technical area for the Gen IV and other U.S. Dept. of Energy (DOE) initiatives that support future deployments of nuclear energy systems. Reliable, capable ICHMI systems will be necessary for the advanced nuclear plants to be economically competitive. ICHMI enables measurement, control, protection, monitoring, and maintenance for processes and components. Through improvements in the technologies and demonstration of their use to facilitate licensing, ICHMI can contribute to the reduction of plant operations and maintenance costs while helping to ensure high plant availability. The impact of ICHMI can be achieved through effective use of the technologies to improve operational efficiency and optimize use of human resources. However, current licensing experience with digital I and C systems has provided lessons learned concerning the difficulties that can be encountered when introducing advanced technologies with expanded capabilities. Thus, in the development of advanced nuclear power designs, it will be important to address both the technical foundations of ICHMI systems as well as their licensing considerations. The ICHMI road-map will identify the necessary research, development and demonstration activities that are essential to facilitate necessary technology advancement and resolve outstanding issues. (authors)

  15. Instrumentation and Control and Human Machine Interface Science and Technology Roadmap in Support of Advanced Reactors and Fuel Programs in the U.S

    International Nuclear Information System (INIS)

    Miller, Don W.; Arndt, Steven A.; Dudenhoeffer, Donald D.; Hallbert, Bruce P.; Bond, Leonard J.; Holcomb, David E.; Wood, Richard T.; Naser, Joseph A.; O'Hara, John M.; Quinn, Edward L.

    2008-01-01

    The purpose of this paper is to provide an overview of the current status of the Instrumentation, Control and Human Machine Interface (ICHMI) Science and Technology Roadmap (Reference xi) that was developed to address the major challenges in this technical area for the Gen IV and other U.S. Department of Energy (DOE) initiatives that support future deployments of nuclear energy systems. Reliable, capable ICHMI systems will be necessary for the advanced nuclear plants to be economically competitive. ICHMI enables measurement, control, protection, monitoring, and maintenance for processes and components. Through improvements in the technologies and demonstration of their use to facilitate licensing, ICHMI can contribute to the reduction of plant operations and maintenance costs while helping to ensure high plant availability. The impact of ICHMI can be achieved through effective use of the technologies to improve operational efficiency and optimize use of human resources. However, current licensing experience with digital I and C systems has provided lessons learned concerning the difficulties that can be encountered when introducing advanced technologies with expanded capabilities. Thus, in the development of advanced nuclear power designs, it will be important to address both the technical foundations of ICHMI systems and their licensing considerations. The ICHMI roadmap will identify the necessary research, development and demonstration activities that are essential to facilitate necessary technology advancement and resolve outstanding issues

  16. National Research Council Dialogue to Assess Progress on NASA's Systems Engineering Cost/Risk Analysis Capability Roadmap Development: General Background and Introduction

    Science.gov (United States)

    Regenie, Victoria

    2005-01-01

    Contents include the following: General Background and Introduction of Capability. Roadmaps for Systems Engineering Cost/Risk Analysis. Agency Objectives. Strategic Planning Transformation. Review Capability Roadmaps and Schedule. Review Purpose of NRC Review. Capability Roadmap Development (Progress to Date).

  17. George E. Pake Prize Lecture: CMOS Technology Roadmap: Is Scaling Ending?

    Science.gov (United States)

    Chen, Tze-Chiang (T. C.)

    The development of silicon technology has been based on the principle of physics and driven by the system needs. Traditionally, the system needs have been satisfied by the increase in transistor density and performance, as suggested by Moore's Law and guided by ''Dennard CMOS scaling theory''. As the silicon industry moves towards the 14nm node and beyond, three of the most important challenges facing Moore's Law and continued CMOS scaling are the growing standby power dissipation, the increasing variability in device characteristics and the ever increasing manufacturing cost. Actually, the first two factors are the embodiments of CMOS approaching atomistic and quantum-mechanical physics boundaries. Industry directions for addressing these challenges are also developing along three primary approaches: Extending silicon scaling through innovations in materials and device structure, expanding the level of integration through three-dimensional structures comprised of through-silicon-vias holes and chip stacking in order to enhance functionality and parallelism and exploring post-silicon CMOS innovation with new nano-devices based on distinctly different principles of physics, new materials and new processes such as spintronics, carbon nanotubes and nanowires. Hence, the infusion of new materials, innovative integration and novel device structures will continue to extend CMOS technology scaling for at least another decade.

  18. AIS/DOE Technology Roadmap Program: Strip Casting: Anticipating New Routes To Steel Sheet

    Energy Technology Data Exchange (ETDEWEB)

    Prof. Alan W. Camb; Prof. Anthony Rollett

    2001-08-31

    To determine the potential for strip casting in the steel industry and to develop the fundamental knowledge necessary to allow the role of strip casting in the modern steel industry to be understood. Based upon a study of carbon steel strip castings that were either produced for the program at British Steel or were received from a pre-commercial production machine, the following conclusions were made. Strip casting of carbon steels is technically feasible for sheet material from slightly less than 1 mm thick to 3 mm thick, and, assuming that it is economically viable, it will be first applied in carbon steel markets that do not require stringent surface quality or extensive forming. The potential of strip casting as a casting process to be developed for steel castings is very high as the cast strip has some very novel characteristics. Direct cast carbon strip has better surface quality, shape and profile than any other casting process currently available. The more rapidly solidified structure of direct cast strip tends to be strong with low ductility; however, with adequate thermal treatment, it is possible to develop a variety of properties from the same grade. The process is more amenable at this time to production tonnages per year of the order of 500,000 tons and as such will first find niche type applications. This technology is an additional technology for steel production and will be in addition to, rather than a replacement for, current casting machines.

  19. Information technology resources assessment

    Energy Technology Data Exchange (ETDEWEB)

    Stevens, D.F. [ed.

    1992-01-01

    This year`s Information Technology Resources Assessment (ITRA) is something of a departure from traditional practice. Past assessments have concentrated on developments in fundamental technology, particularly with respect to hardware. They form an impressive chronicle of decreasing cycle times, increasing densities, decreasing costs (or, equivalently, increasing capacity and capability per dollar spent), and new system architectures, with a leavening of operating systems and languages. Past assessments have aimed -- and succeeded -- at putting information technology squarely in the spotlight; by contrast, in the first part of this assessment, we would like to move it to the background, and encourage the reader to reflect less on the continuing technological miracles of miniaturization in space and time and more on the second- and third-order implications of some possible workplace applications of these miracles. This Information Technology Resources Assessment is intended to provide a sense of technological direction for planners in projecting the hardware, software, and human resources necessary to support the diverse IT requirements of the various components of the DOE community. It is also intended to provide a sense of our new understanding of the place of IT in our organizations.

  20. Information technology resources assessment

    Energy Technology Data Exchange (ETDEWEB)

    Stevens, D.F. (ed.)

    1992-01-01

    This year's Information Technology Resources Assessment (ITRA) is something of a departure from traditional practice. Past assessments have concentrated on developments in fundamental technology, particularly with respect to hardware. They form an impressive chronicle of decreasing cycle times, increasing densities, decreasing costs (or, equivalently, increasing capacity and capability per dollar spent), and new system architectures, with a leavening of operating systems and languages. Past assessments have aimed -- and succeeded -- at putting information technology squarely in the spotlight; by contrast, in the first part of this assessment, we would like to move it to the background, and encourage the reader to reflect less on the continuing technological miracles of miniaturization in space and time and more on the second- and third-order implications of some possible workplace applications of these miracles. This Information Technology Resources Assessment is intended to provide a sense of technological direction for planners in projecting the hardware, software, and human resources necessary to support the diverse IT requirements of the various components of the DOE community. It is also intended to provide a sense of our new understanding of the place of IT in our organizations.

  1. Health care technology assessment

    Science.gov (United States)

    Goodman, Clifford

    1994-12-01

    The role of technology in the cost of health care is a primary issue in current debates concerning national health care reform. The broad scope of studies for understanding technological impacts is known as technology assessment. Technology policy makers can improve their decision making by becoming more aware, and taking greater advantage, of key trends in health care technology assessment (HCTA). HCTA is the systematic evaluation of the properties, impacts, and other attributes of health care technologies, including: technical performance; clinical safety and efficacy/effectiveness; cost-effectiveness and other economic attributes; appropriate circumstances/indications for use; and social, legal, ethical, and political impacts. The main purpose of HCTA is to inform technology-related policy making in health care. Among the important trends in HCTA are: (1) proliferation of HCTA groups in the public and private sectors; (2) higher standards for scientific evidence concerning technologies; (3) methodological development in cost analyses, health-related quality of life measurement, and consolidation of available scientific evidence (e.g., meta-analysis); (4) emphasis on improved data on how well technologies work in routine practice and for traditionally under-represented patient groups; (5) development of priority-setting methods; (6) greater reliance on medical informatics to support and disseminate HCTA findings.

  2. AISI/DOE Technology Roadmap Program: Improved Surface Quality of Exposed Automotive Sheet Steels

    Energy Technology Data Exchange (ETDEWEB)

    John G. Speer; David K. Matlock; Noel Meyers; Young-Min Choi

    2002-10-10

    Surface quality of sheet steels is an important economic and technical issue for applications such as critical automotive surfaces. This project was therefore initiated to develop a more quantitative methodology for measuring surface imperfections, and to assess their response to forming and painting, particularly with respect to their visibility or invisibility after painting. The objectives were met, and included evaluation of a variety of imperfections present on commercial sheet surfaces or simulated using methods developed in the laboratory. The results are expected to have significant implications with respect to the methodology for assessing surface imperfections, development of quantitative criteria for surface inspection, and understanding and improving key painting process characteristics that influence the perceived quality of sheet steel surfaces.

  3. Information Technology Resources Assessment

    Energy Technology Data Exchange (ETDEWEB)

    1993-04-01

    The Information Technology Resources Assessment (ITRA) is being published as a companion document to the Department of Energy (DOE) FY 1994--FY 1998 Information Resources Management Long-Range Plan. This document represents a collaborative effort between the Office of Information Resources Management and the Office of Energy Research that was undertaken to achieve, in part, the Technology Strategic Objective of IRM Vision 21. An integral part of this objective, technology forecasting provides an understanding of the information technology horizon and presents a perspective and focus on technologies of particular interest to DOE program activities. Specifically, this document provides site planners with an overview of the status and use of new information technology for their planning consideration.

  4. Research and Development Technology Development Roadmaps for the Next Generation Nuclear Plant Project

    Energy Technology Data Exchange (ETDEWEB)

    Ian McKirdy

    2011-07-01

    The U.S. Department of Energy (DOE) has selected the high temperature gas-cooled reactor (HTGR) design for the Next Generation Nuclear Plant (NGNP) Project. The NGNP will demonstrate the use of nuclear power for process heat, hydrogen and electricity production. The reactor will be graphite moderated with helium as the primary coolant and may be either prismatic or pebble-bed. Although, final design features have not yet been determined. Research and Development (R&D) activities are proceeding on those known plant systems to mature the technology, codify the materials for specific applications, and demonstrate the component and system viability in NGNP relevant and integrated environments. Collectively these R&D activities serve to reduce the project risk and enhance the probability of on-budget, on-schedule completion and NRC licensing. As the design progresses, in more detail, toward final design and approval for construction, selected components, which have not been used in a similar application, in a relevant environment nor integrated with other components and systems, must be tested to demonstrate viability at reduced scales and simulations prior to full scale operation. This report and its R&D TDRMs present the path forward and its significance in assuring technical readiness to perform the desired function by: Choreographing the integration between design and R&D activities; and proving selected design components in relevant applications.

  5. Building the electronic industry's roadmaps

    Science.gov (United States)

    Boulton, William R.

    1995-02-01

    JTEC panelists found a strong consistency among the electronics firms they visited: all the firms had clear visions or roadmaps for their research and development activities and had committed resources to ensure that they achieve targeted results. The overarching vision driving Japan's electronics industry is that of achieving market success through developing appealing, high-quality, low-cost consumer goods - ahead of the competition. Specifics of the vision include improving performance, quality, and portability of consumer electronics products. Such visions help Japanese companies define in detail the roadmaps they will follow to develop new and improved electronic packaging technologies.

  6. Optimizing Clinical Drug Product Performance: Applying Biopharmaceutics Risk Assessment Roadmap (BioRAM) and the BioRAM Scoring Grid.

    Science.gov (United States)

    Dickinson, Paul A; Kesisoglou, Filippos; Flanagan, Talia; Martinez, Marilyn N; Mistry, Hitesh B; Crison, John R; Polli, James E; Cruañes, Maria T; Serajuddin, Abu T M; Müllertz, Anette; Cook, Jack A; Selen, Arzu

    2016-11-01

    The aim of Biopharmaceutics Risk Assessment Roadmap (BioRAM) and the BioRAM Scoring Grid is to facilitate optimization of clinical performance of drug products. BioRAM strategy relies on therapy-driven drug delivery and follows an integrated systems approach for formulating and addressing critical questions and decision-making (J Pharm Sci. 2014,103(11): 3777-97). In BioRAM, risk is defined as not achieving the intended in vivo drug product performance, and success is assessed by time to decision-making and action. Emphasis on time to decision-making and time to action highlights the value of well-formulated critical questions and well-designed and conducted integrated studies. This commentary describes and illustrates application of the BioRAM Scoring Grid, a companion to the BioRAM strategy, which guides implementation of such an integrated strategy encompassing 12 critical areas and 6 assessment stages. Application of the BioRAM Scoring Grid is illustrated using published literature. Organizational considerations for implementing BioRAM strategy, including the interactions, function, and skillsets of the BioRAM group members, are also reviewed. As a creative and innovative systems approach, we believe that BioRAM is going to have a broad-reaching impact, influencing drug development and leading to unique collaborations influencing how we learn, and leverage and share knowledge. Published by Elsevier Inc.

  7. Partnership for Wave Power - Roadmaps

    DEFF Research Database (Denmark)

    Nielsen, Kim; Krogh, Jan; Brodersen, Hans Jørgen

    This Wave Energy Technology Roadmap is developed by the Partnership for Wave Power including nine Danish wave energy developers. It builds on to the strategy [1] published by the Partnership in 2012, a document that describes the long term vision of the Danish Wave Energy sector: “By 2030...

  8. Roadmap for Inclusive Innovation

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — The Roadmap for Inclusive Innovation data set shares the status of action items under the Roadmap for Inclusive Innovation. Each action or project has been assigned...

  9. Human Exploration Systems and Mobility Capability Roadmap Progress Review

    Science.gov (United States)

    Culbert, Chris; Taylor, Jeff

    2005-01-01

    Contents include the following: Capability Roadmap Team. Capability Description and Capability Breakdown Structure. Benefits of the Human Systems and Mobility Capability. Roadmap Process and Approach. Drivers and Assumptions for the whole team. Current State-of-the-Art, Assumptions and Requirements will be covered in the appropriate sections. Capability Presentations by Leads under Roadmap (Repeated for each capability under roadmap). Capability Description, Benefits, Current State-of-the-Art. Capability Requirements and Assumptions. Roadmap for Capability. Capability Readiness Level. Technology Readiness Level. Figures of Merit. Summary of Top Level Capability. Significant Technical Challenges. Summary and Forward Work.

  10. Developing an integrated technology roadmapping process to meet regional technology planning needs: the e-bike pilot study

    NARCIS (Netherlands)

    Cowan, Kelly R.; Daim, Tugrul U.; Walsh, Steven Thomas; Kocaoglu, Dundar F.; Anderson, Timothy R.; Daim, Tugrul U.; Kozanoglu, Dilek Cetindamar; Niwa, Kiyoshi; Perman, Gary

    2014-01-01

    Smart grid is a promising class of new technologies offering many potential benefits for electric utility systems, including possibilities for smart appliances which can communicate with power systems and help to better match supply and demand. Additional services include the ability to better

  11. Transformational Spaceport and Range Capabilities Roadmap Interim Review to National Research Council External Review Panel

    Science.gov (United States)

    Poniatowski, Karen

    2005-01-01

    Contents include the following: Overview/Introduction. Roadmap Approach/Considerations. Roadmap Timeline/Spirals. Requirements Development. Spaceport/Range Capabilities. Mixed Range Architecture. User Requirements/Customer Considerations. Manifest Considerations. Emerging Launch User Requirements. Capability Breakdown Structure/Assessment. Roadmap Team Observations. Transformational Range Test Concept. Roadmap Team Conclusions. Next Steps.

  12. Information technology resources assessment

    Energy Technology Data Exchange (ETDEWEB)

    Loken, S.C. [ed.

    1993-01-01

    The emphasis in Information Technology (IT) development has shifted from technology management to information management, and the tools of information management are increasingly at the disposal of end-users, people who deal with information. Moreover, the interactive capabilities of technologies such as hypertext, scientific visualization, virtual reality, video conferencing, and even database management systems have placed in the hands of users a significant amount of discretion over how these resources will be used. The emergence of high-performance networks, as well as network operating systems, improved interoperability, and platform independence of applications will eliminate technical barriers to the use of data, increase the power and range of resources that can be used cooperatively, and open up a wealth of possibilities for new applications. The very scope of these prospects for the immediate future is a problem for the IT planner or administrator. Technology procurement and implementation, integration of new technologies into the existing infrastructure, cost recovery and usage of networks and networked resources, training issues, and security concerns such as data protection and access to experiments are just some of the issues that need to be considered in the emerging IT environment. As managers we must use technology to improve competitiveness. When procuring new systems, we must take advantage of scalable resources. New resources such as distributed file systems can improve access to and efficiency of existing operating systems. In addition, we must assess opportunities to improve information worker productivity and information management through tedmologies such as distributed computational visualization and teleseminar applications.

  13. Book of Knowledge (BOK) for NASA Electronic Packaging Roadmap

    Science.gov (United States)

    Ghaffarian, Reza

    2015-01-01

    The objective of this document is to update the NASA roadmap on packaging technologies (initially released in 2007) and to present the current trends toward further reducing size and increasing functionality. Due to the breadth of work being performed in the area of microelectronics packaging, this report presents only a number of key packaging technologies detailed in three industry roadmaps for conventional microelectronics and a more recently introduced roadmap for organic and printed electronics applications. The topics for each category were down-selected by reviewing the 2012 reports of the International Technology Roadmap for Semiconductor (ITRS), the 2013 roadmap reports of the International Electronics Manufacturing Initiative (iNEMI), the 2013 roadmap of association connecting electronics industry (IPC), the Organic Printed Electronics Association (OE-A). The report also summarizes the results of numerous articles and websites specifically discussing the trends in microelectronics packaging technologies.

  14. Heat Roadmap Europe

    DEFF Research Database (Denmark)

    David, Andrei; Mathiesen, Brian Vad; Averfalk, Helge

    2017-01-01

    The Heat Roadmap Europe (HRE) studies estimated a potential increase of the district heating (DH) share to 50% of the entire heat demand by 2050, with approximately 25–30% of it being supplied using large-scale electric heat pumps. This study builds on this potential and aims to document that suc......The Heat Roadmap Europe (HRE) studies estimated a potential increase of the district heating (DH) share to 50% of the entire heat demand by 2050, with approximately 25–30% of it being supplied using large-scale electric heat pumps. This study builds on this potential and aims to document......, refrigerants, efficiency and types of operation of 149 units with 1580 MW of thermal output, the study further uses this data to analyze if the deployment of this technology on a large-scale is possible in other locations in Europe. It finally demonstrates that the technical level of the existing heat pumps...... is mature enough to make them suitable for replication in other locations in Europe....

  15. The ethanol industry from the analysis technology road maps; A industria do etanol a partir da analise de roadmaps tecnologicos

    Energy Technology Data Exchange (ETDEWEB)

    Calil Neto, Antonio; Guimaraes, Maria Jose de Oliveira Cavalacanti; Freire, Estevao [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola de Quimica

    2012-07-01

    The behavior of the ethanol industry in the coming years should be buoyed by several factors, among which gain prominence: feedstock, conversion technologies and products. This article aims, from the analysis of technological road maps, is dealing with Brazil in the face of the global market, is primarily addressing the international context, to assess which technologies tend to predominate, with emphasis on the ethanol industry, addressing convergent and complementary the technology road maps, especially regarding the barriers and challenges, costs and logistics, and other broader issues that govern the production of sustainable feedstock, conversion technologies and biofuels industry, with emphasis on ethanol. Conventional biofuels today are generally not competitive with fossil fuels at market prices, except for the cane ethanol already has a good performance in economic terms. Moreover, strategies for first generation ethanol differ from those for the second generation, which is at an earlier stage of technology development and still subject to comparatively high production costs. The non-economic fundamental barrier to the development of biofuels, particularly ethanol, is the uncertainty as to its sustainability. The debate sometimes on competition with food production and the potential destruction of valuable ecosystems put biofuels in the center of the discussion about sustainability. The challenges facing the ethanol industry range from the need to implement on a large scale to reduce costs along the production chain, through the need for second-generation technologies to reach the level of market, with the behavior of these factors and others will depend on each setting route. (author)

  16. AISI/DOE Technology Roadmap Program: A Technology of Low Coal Rate and High Productivity of RHF Ironmaking

    Energy Technology Data Exchange (ETDEWEB)

    Wei-Kao Lu

    2002-09-15

    An economical and environment-friendly ironmaking process based on heating the chemiexecy self-sufficient green balls of iron ore and coal in a hearth furnace is being developed with financial support from AISI members and DOE. DRI, which is hot (1400 C), dense (3.2 g/cm) and of high degree of metallization (95%), has been produced in laboratory and in a pilot plant in Genoa, Italy. Products of such quality have been made from American and Brazilian ores, BOF sludge, EAF dust/BOF sludge mixtures and millscale. The removal of zinc and lead from green balls by this process is essentially complete. In comparison with typical blast furnace operation, the new technology with a melter would have a lower total coal rate by 200kg.THM. The elimination of cokemaking and high temperature agglomeration steps, and a simpler gas handling system would lead to lower capital and operating costs. In comparison with commercial RHF practice it is different in atmosphere (fully oxidized at 1600 to 1650 C), in bed height (120 mm instead of 20-25 mm) and in pellet composition (much less coal but of higher VM). The combined effect leads to three times higher furnace productivity, lower coal consumption and superior DRI quality. The risk of re-oxidation (slag formation) and dusty operation are practiexecy eliminated. The process is stable, tolerant and independent of the size, shape and movement of the hearth. However, materials handling (e.g., discharge of hot DRI) and the exact energy savings have to be established in a larger furnace, straight or rotary, and in a continuous mode of operation.

  17. Standing on the Shoulders of Giants: Results From the Radiation Oncology Academic Development and Mentorship Assessment Project (ROADMAP)

    International Nuclear Information System (INIS)

    Holliday, Emma B.; Jagsi, Reshma; Thomas, Charles R.; Wilson, Lynn D.; Fuller, Clifton D.

    2014-01-01

    Purpose: To analyze survey information regarding mentorship practices and cross-correlate the results with objective metrics of academic productivity among academic radiation oncologists at US Accreditation Council for Graduate Medical Education (ACGME)-accredited residency training programs. Methods and Materials: An institutional review board-approved survey for the Radiation Oncology Academic Development and Mentorship Assessment Project (ROADMAP) was sent to 1031 radiation oncologists employed at an ACGME-accredited residency training program and administered using an international secure web application designed exclusively to support data capture for research studies. Data collected included demographics, presence of mentorship, and the nature of specific mentoring activities. Productivity metrics, including number of publications, number of citations, h-index, and date of first publication, were collected for each survey respondent from a commercially available online database, and m-index was calculated. Results: A total of 158 academic radiation oncologists completed the survey, 96 of whom reported having an academic/scientific mentor. Faculty with a mentor had higher numbers of publications, citations, and h- and m-indices. Differences in gender and race/ethnicity were not associated with significant differences in mentorship rates, but those with a mentor were more likely to have a PhD degree and were more likely to have more time protected for research. Bivariate fit regression modeling showed a positive correlation between a mentor's h-index and their mentee's h-index (R 2 = 0.16; P<.001). Linear regression also showed significant correlates of higher h-index, in addition to having a mentor (P=.001), included a longer career duration (P<.001) and fewer patients in treatment (P=.02). Conclusions: Mentorship is widely believed to be important to career development and academic productivity. These results emphasize the importance of identifying and

  18. Roadmapping při řízení technologií výroby energie z obnovitených zdrojů

    Directory of Open Access Journals (Sweden)

    Katarzyna Halicka

    2015-03-01

    Full Text Available Purpose of the article: The main objective of this paper is to present the possibility of using the method of technology roadmapping to build the route of development of RES technologies. The article is of reviewtheoretical character and is the beginning of further work in this area. Methodology/methods: General scheme of route development of RES technologies has been developed, inter alia, on the basis of evaluation studies of Polish and foreign literature and conceptual study work in the field of graphic presentation of routes, as well as the experience of the author associated with the management and planning in the energy market. Scientific aim: The scientific purpose of this study was to identify and present the basic assumptions of the design of routes of development of RES technologies and to construct a general scheme of the routes of development of renewable energy technologies. Findings: This paper presents the basic principles for the design of routes of development of renewable energy technologies. Based on a detailed review of the designed routes of development of technologies in the area of renewable energy, recommendations for the design of routes of development of RES technologies have been formulated. Also, a base the concept of the routes of RES technologies has been proposed. Conclusions: The basic project of the RES route will enable the coordination of the development of the technological potential of renewable energy sources, as well as the development of the routes of implementation of the desired vision of the development of technologies using renewable energy sources in Poland in two time perspectives: 2030 and up to 2050. It will also generate the knowledge needed in the development of the appropriate energy policy of the country. Knowledge obtained in this way can provide a basis for energy security management of the state.

  19. Preliminary Assessment of Operational Hazards and Safety Requirements for Airborne Trajectory Management (ABTM) Roadmap Applications

    Science.gov (United States)

    Cotton, William B.; Hilb, Robert; Koczo, Stefan, Jr.; Wing, David J.

    2016-01-01

    A set of five developmental steps building from the NASA TASAR (Traffic Aware Strategic Aircrew Requests) concept are described, each providing incrementally more efficiency and capacity benefits to airspace system users and service providers, culminating in a Full Airborne Trajectory Management capability. For each of these steps, the incremental Operational Hazards and Safety Requirements are identified for later use in future formal safety assessments intended to lead to certification and operational approval of the equipment and the associated procedures. Two established safety assessment methodologies that are compliant with the FAA's Safety Management System were used leading to Failure Effects Classifications (FEC) for each of the steps. The most likely FEC for the first three steps, Basic TASAR, Digital TASAR, and 4D TASAR, is "No effect". For step four, Strategic Airborne Trajectory Management, the likely FEC is "Minor". For Full Airborne Trajectory Management (Step 5), the most likely FEC is "Major".

  20. Assessing the Credibility of Climate Science Information: A Roadmap for Educators

    Science.gov (United States)

    Mandia, S. A.

    2017-12-01

    Although there is an overwhelming scientific consensus that humans are driving modern day climate change, a significant portion of Americans are still not convinced. One reason for this gap in understanding results from a large body of misinformation that is easily accessible by students and educators. Here the author presents an effective teaching model to allow students to assess the credibility of organizations and their authors who publish climate science information aimed toward the general public.

  1. Research and Development Roadmaps for Liquid Metal Cooled Fast Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Kim, T. K. [Argonne National Lab. (ANL), Argonne, IL (United States); Grandy, C. [Argonne National Lab. (ANL), Argonne, IL (United States); Natesan, K. [Argonne National Lab. (ANL), Argonne, IL (United States); Sienicki, J. [Argonne National Lab. (ANL), Argonne, IL (United States); Hill, R. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2017-04-20

    The United States Department of Energy (DOE) commissioned the development of technology roadmaps for advanced (non-light water reactor) reactor concepts to help focus research and development funding over the next five years. The roadmaps show the research and development needed to support demonstration of an advanced (non-LWR) concept by the early 2030s, consistent with DOE’s Vision and Strategy for the Development and Deployment of Advanced Reactors. The intent is only to convey the technical steps that would be required to achieve such a goal; the means by which DOE will determine whether to invest in specific tasks will be treated separately. The starting point for the roadmaps is the Technical Readiness Assessment performed as part of an Advanced Test and Demonstration Reactor study released in 2016. The roadmaps were developed based upon a review of technical reports and vendor literature summarizing the technical maturity of each concept and the outstanding research and development needs. Critical path tasks for specific systems were highlighted on the basis of time and resources needed to complete the tasks and the importance of the system to the performance of the reactor concept. The roadmaps are generic, i.e. not specific to a particular vendor’s design but vendor design information may have been used as representative of the concept family. In the event that both near-term and more advanced versions of a concept are being developed, either a single roadmap with multiple branches or separate roadmaps for each version were developed. In each case, roadmaps point to a demonstration reactor (engineering or commercial) and show the activities that must be completed in parallel to support that demonstration in the 2030-2035 window. This report provides the roadmaps for two fast reactor concepts, the Sodium-cooled Fast Reactor (SFR) and the Lead-cooled Fast Reactor (LFR). The SFR technology is mature enough for commercial demonstration by the early 2030s

  2. Roadmap on optical security

    Science.gov (United States)

    Javidi, Bahram; Carnicer, Artur; Yamaguchi, Masahiro; Nomura, Takanori; Pérez-Cabré, Elisabet; Millán, María S.; Nishchal, Naveen K.; Torroba, Roberto; Fredy Barrera, John; He, Wenqi; Peng, Xiang; Stern, Adrian; Rivenson, Yair; Alfalou, A.; Brosseau, C.; Guo, Changliang; Sheridan, John T.; Situ, Guohai; Naruse, Makoto; Matsumoto, Tsutomu; Juvells, Ignasi; Tajahuerce, Enrique; Lancis, Jesús; Chen, Wen; Chen, Xudong; Pinkse, Pepijn W. H.; Mosk, Allard P.; Markman, Adam

    2016-08-01

    Information security and authentication are important challenges facing society. Recent attacks by hackers on the databases of large commercial and financial companies have demonstrated that more research and development of advanced approaches are necessary to deny unauthorized access to critical data. Free space optical technology has been investigated by many researchers in information security, encryption, and authentication. The main motivation for using optics and photonics for information security is that optical waveforms possess many complex degrees of freedom such as amplitude, phase, polarization, large bandwidth, nonlinear transformations, quantum properties of photons, and multiplexing that can be combined in many ways to make information encryption more secure and more difficult to attack. This roadmap article presents an overview of the potential, recent advances, and challenges of optical security and encryption using free space optics. The roadmap on optical security is comprised of six categories that together include 16 short sections written by authors who have made relevant contributions in this field. The first category of this roadmap describes novel encryption approaches, including secure optical sensing which summarizes double random phase encryption applications and flaws [Yamaguchi], the digital holographic encryption in free space optical technique which describes encryption using multidimensional digital holography [Nomura], simultaneous encryption of multiple signals [Pérez-Cabré], asymmetric methods based on information truncation [Nishchal], and dynamic encryption of video sequences [Torroba]. Asymmetric and one-way cryptosystems are analyzed by Peng. The second category is on compression for encryption. In their respective contributions, Alfalou and Stern propose similar goals involving compressed data and compressive sensing encryption. The very important area of cryptanalysis is the topic of the third category with two sections

  3. Current status of the TSensor systems roadmap

    NARCIS (Netherlands)

    Walsh, Steven Thomas; Bryzek, Janusz; Pisano, Albert P.

    2014-01-01

    We apply our work from the contemporary pharmaceutical industry to generate a third generation-style technology roadmap for TSensor Systems. First we identify drivers and consortia. We then identify relevant technology components, namely multiple root technologies, multiple unit cells, multiple

  4. Vision 2020. Reaction Engineering Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Klipstein, David H. [Reaction Design, San Diego, CA (United States); Robinson, Sharon [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2001-01-01

    The Reaction Engineering Roadmap is a part of an industry- wide effort to create a blueprint of the research and technology milestones that are necessary to achieve longterm industry goals. This report documents the results of a workshop focused on the research needs, technology barriers, and priorities of the chemical industry as they relate to reaction engineering viewed first by industrial use (basic chemicals; specialty chemicals; pharmaceuticals; and polymers) and then by technology segment (reactor system selection, design, and scale-up; chemical mechanism development and property estimation; dealing with catalysis; and new, nonstandard reactor types).

  5. Use of the RISK21 roadmap and matrix: human health risk assessment of the use of a pyrethroid in bed netting.

    Science.gov (United States)

    Doe, John E; Lander, Deborah R; Doerrer, Nancy G; Heard, Nina; Hines, Ronald N; Lowit, Anna B; Pastoor, Timothy; Phillips, Richard D; Sargent, Dana; Sherman, James H; Young Tanir, Jennifer; Embry, Michelle R

    2016-01-01

    The HESI-coordinated RISK21 roadmap and matrix are tools that provide a transparent method to compare exposure and toxicity information and assess whether additional refinement is required to obtain the necessary precision level for a decision regarding safety. A case study of the use of a pyrethroid, "pseudomethrin," in bed netting to control malaria is presented to demonstrate the application of the roadmap and matrix. The evaluation began with a problem formulation step. The first assessment utilized existing information pertaining to the use and the class of chemistry. At each stage of the step-wise approach, the precision of the toxicity and exposure estimates were refined as necessary by obtaining key data which enabled a decision on safety to be made efficiently and with confidence. The evaluation demonstrated the concept of using existing information within the RISK21 matrix to drive the generation of additional data using a value-of-information approach. The use of the matrix highlighted whether exposure or toxicity required further investigation and emphasized the need to address the default uncertainty factor of 100 at the highest tier of the evaluation. It also showed how new methodology such as the use of in vitro studies and assays could be used to answer the specific questions which arise through the use of the matrix. The matrix also serves as a useful means to communicate progress to stakeholders during an assessment of chemical use.

  6. Roadmapping as a Tool for Renewing Regulatory Practices

    DEFF Research Database (Denmark)

    Borch, Kristian; Norus, Jesper

    The aim of this paper is to explore technological roadmaps to identify key issues concerning the development and utilization of stem cells. From a review of the political decision making processes in three countries, Denmark, the Netherlands, and Germany we suggest that technological roadmapping...... based on the content and visions of the technologies in question. In the conclusion we discuss that the positive side effect of such a shift in the regulatory paradigm is that technological roadmapping can be used as a planning tool to deal with priorities in the health care system when the technologies...

  7. Research & Development Roadmap for Next-Generation Appliances

    Energy Technology Data Exchange (ETDEWEB)

    Goetzler, William [Navigant Consulting, Inc., Burlington, MA (United States); Sutherland, Timothy [Navigant Consulting, Inc., Burlington, MA (United States); Foley, Kevin [Navigant Consulting, Inc., Burlington, MA (United States)

    2012-03-01

    Appliances present an attractive opportunity for near-term energy savings in existing building, because they are less expensive and replaced more regularly than heating, ventilation, and air-conditioning (HVAC) systems or building envelope components. This roadmap targets high-priority research and development (R&D), demonstration and commercialization activities that could significantly reduce residential appliance energy consumption. The main objective of the roadmap is to seek activities that accelerate the commercialization of high-efficiency appliance technologies while maintaining the competitiveness of American industry. The roadmap identified and evaluated potential technical innovations, defined research needs, created preliminary research and development roadmaps, and obtained stakeholder feedback on the proposed initiatives.

  8. Roadmap on optical energy conversion

    Science.gov (United States)

    Boriskina, Svetlana V.; Green, Martin A.; Catchpole, Kylie; Yablonovitch, Eli; Beard, Matthew C.; Okada, Yoshitaka; Lany, Stephan; Gershon, Talia; Zakutayev, Andriy; Tahersima, Mohammad H.; Sorger, Volker J.; Naughton, Michael J.; Kempa, Krzysztof; Dagenais, Mario; Yao, Yuan; Xu, Lu; Sheng, Xing; Bronstein, Noah D.; Rogers, John A.; Alivisatos, A. Paul; Nuzzo, Ralph G.; Gordon, Jeffrey M.; Wu, Di M.; Wisser, Michael D.; Salleo, Alberto; Dionne, Jennifer; Bermel, Peter; Greffet, Jean-Jacques; Celanovic, Ivan; Soljacic, Marin; Manor, Assaf; Rotschild, Carmel; Raman, Aaswath; Zhu, Linxiao; Fan, Shanhui; Chen, Gang

    2016-07-01

    For decades, progress in the field of optical (including solar) energy conversion was dominated by advances in the conventional concentrating optics and materials design. In recent years, however, conceptual and technological breakthroughs in the fields of nanophotonics and plasmonics combined with a better understanding of the thermodynamics of the photon energy-conversion processes reshaped the landscape of energy-conversion schemes and devices. Nanostructured devices and materials that make use of size quantization effects to manipulate photon density of states offer a way to overcome the conventional light absorption limits. Novel optical spectrum splitting and photon-recycling schemes reduce the entropy production in the optical energy-conversion platforms and boost their efficiencies. Optical design concepts are rapidly expanding into the infrared energy band, offering new approaches to harvest waste heat, to reduce the thermal emission losses, and to achieve noncontact radiative cooling of solar cells as well as of optical and electronic circuitries. Light-matter interaction enabled by nanophotonics and plasmonics underlie the performance of the third- and fourth-generation energy-conversion devices, including up- and down-conversion of photon energy, near-field radiative energy transfer, and hot electron generation and harvesting. Finally, the increased market penetration of alternative solar energy-conversion technologies amplifies the role of cost-driven and environmental considerations. This roadmap on optical energy conversion provides a snapshot of the state of the art in optical energy conversion, remaining challenges, and most promising approaches to address these challenges. Leading experts authored 19 focused short sections of the roadmap where they share their vision on a specific aspect of this burgeoning research field. The roadmap opens up with a tutorial section, which introduces major concepts and terminology. It is our hope that the roadmap

  9. Assessing readiness of cyberinfrastructure resources for cross-domain interoperability: a view from an NSF EarthCube roadmap

    Science.gov (United States)

    Zaslavsky, Ilya; Couch, Alva; Richard, Stephen; Valentine, David; Lehnert, Kerstin; Stocks, Karen; Murphy, Philip

    2013-04-01

    EarthCube is a new research initiative of the U.S. National Science Foundation, with the mission to develop community-guided cyberinfrastructure integrating data, models and other resources across geoscience disciplines. Analysis and modeling of physical processes that are not confined to disciplinary or jurisdictional boundaries, requires that data and models can be re-used outside the original context in which they are collected or developed. Infrastructure readiness for cross-domain interoperability encompasses the capabilities that need to be in place to enable such information re-use and ensure that it is both scientifically sound and technically feasible. In an ideal cross-domain information integration scenario, resources can be discovered via federated catalogs and linked nomenclatures from neighboring domains, while standard data services can be used to transparently compile composite data products and to integrate information using commonality in key data characteristics related to shared models of spatial features, time measurements, and observations. The main premise of the cross-domain readiness assessment is that when accessing domain resources from another domain, a user expects to be able to discover these resources, interpret them, retrieve the information, and integrate it with other data. Documentation of the resource must be sufficient for a user in a different context to determine fitness for use, and establish trust in scientific soundness. As part of an EarthCube roadmap focused on cross-domain interoperability, we explored a number of approaches to cyberinfrastructure readiness assessment, addressing both readiness of existing resources, and readiness of processes that enable cross-domain communication and information exchange across disciplinary boundaries. Our initial assessment considers basic infrastructure components required to enable cross-domain interoperability in the geosciences. These components, and the evaluation metrics

  10. Space Communications Capability Roadmap Interim Review

    Science.gov (United States)

    Spearing, Robert; Regan, Michael

    2005-01-01

    Contents include the following: Identify the need for a robust communications and navigation architecture for the success of exploration and science missions. Describe an approach for specifying architecture alternatives and analyzing them. Establish a top level architecture based on a network of networks. Identify key enabling technologies. Synthesize capability, architecture and technology into an initial capability roadmap.

  11. Energy Roadmap 2050

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-02-15

    On 15 December 2011, the European Commission adopted the Communication 'Energy Roadmap 2050'. The EU is committed to reducing greenhouse gas emissions to 80-95% below 1990 levels by 2050 in the context of necessary reductions by developed countries as a group. In the Energy Roadmap 2050 the Commission explores the challenges posed by delivering the EU's decarbonisation objective while at the same time ensuring security of energy supply and competitiveness. The Energy Roadmap 2050 is the basis for developing a long-term European framework together with all stakeholders.

  12. Technology Performance Level Assessment Methodology.

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, Jesse D.; Bull, Diana L; Malins, Robert Joseph; Costello, Ronan Patrick; Aurelien Babarit; Kim Nielsen; Claudio Bittencourt Ferreira; Ben Kennedy; Kathryn Dykes; Jochem Weber

    2017-04-01

    The technology performance level (TPL) assessments can be applied at all technology development stages and associated technology readiness levels (TRLs). Even, and particularly, at low TRLs the TPL assessment is very effective as it, holistically, considers a wide range of WEC attributes that determine the techno-economic performance potential of the WEC farm when fully developed for commercial operation. The TPL assessment also highlights potential showstoppers at the earliest possible stage of the WEC technology development. Hence, the TPL assessment identifies the technology independent “performance requirements.” In order to achieve a successful solution, the entirety of the performance requirements within the TPL must be considered because, in the end, all the stakeholder needs must be achieved. The basis for performing a TPL assessment comes from the information provided in a dedicated format, the Technical Submission Form (TSF). The TSF requests information from the WEC developer that is required to answer the questions posed in the TPL assessment document.

  13. Roadmapping - A Tool for Strategic Planning and Leveraging R and D completed by other Agencies

    International Nuclear Information System (INIS)

    Collins, J. W.

    2002-01-01

    The Department of Energy (DOE) is responsible for management of the environmental legacy of the nation's nuclear weapons and research program. This is the largest, most complex environmental cleanup program in the world. The issues and problems encountered in this program create the need to develop many scientific and technological solutions. To be effective, the process used to create these solutions must be well coordinated through DOE's Environmental Management program, the rest of DOE, and other Federal agencies. Roadmapping is one strategic planning tool to provide the needed coordination. Past roadmapping accomplishments include: (1) Issuance of the Draft EM Roadmapping Guidance; (2) Issuance of the EM R and D Program Plan and Strategic Plan which established the direction for Roadmapping; (3) Issuance of the OST Management Plan which calls out Roadmapping as a key tool in EM Research and Development (R and D) Strategic Planning; (4) Completion of or progress on key EM Roadmaps, i.e., Savannah River High Level Waste (HLW) Salt Dispositioning Roadmaps, Hanford Groundwater/Vadose Zone Roadmap, Robotics and Intelligent Machines Critical Technology Roadmap, Complex-Wide Vadose Zone Roadmap, Long-Term Stewardship Preliminary Roadmap, Hydrogen Gas Generation R and D Plan (Roadmap), Idaho National Engineering and Environmental Laboratory (INEEL) Sodium Bearing Waste Dispositioning Roadmap, INEEL Voluntary Consent Order Tanks Characterization Roadmap, INEEL Vadose Zone/Groundwater Roadmap, Calcine Treatment Alternatives Roadmap. These efforts represent a great start; however, there is more to be accomplished in using Roadmapping as a tool for planning strategic initiatives and in coordinating the R and D performed by multiple federal agencies

  14. Turbine imaging technology assessment

    Energy Technology Data Exchange (ETDEWEB)

    Moursund, R. A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Carlson, T. J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2004-12-01

    The goal of this project was to identify and evaluate imaging technologies for observing juvenile fish within a Kaplan turbine, and specifically that would enable scientists to determine mechanisms of fish injury within an operating turbine unit. This report documents the opportunities and constraints for observing juvenile fish at specific locations during turbine passage. These observations were used to make modifications to dam structures and operations to improve conditions for fish passage while maintaining or improving hydropower production. The physical and hydraulic environment that fish experience as they pass through the hydroelectric plants were studied and the regions with the greatest potential for injury were defined. Biological response data were also studied to determine the probable types of injuries sustained in the turbine intake and what types of injuries are detectable with imaging technologies. The study grouped injury-causing mechanisms into two categories: fluid (pressure/cavitation, shear, turbulence) and mechanical (strike/collision, grinding/pinching, scraping). The physical constraints of the environment, together with the likely types of injuries to fish, provided the parameters needed for a rigorous imaging technology evaluation. Types of technology evaluated included both tracking and imaging systems using acoustic technologies (such as sonar and acoustic tags) and optic technologies (such as pulsed-laser videography, which is high-speed videography using a laser as the flash). Criteria for determining image data quality such as frame rate, target detectability, and resolution were used to quantify the minimum requirements of an imaging sensor.

  15. Technology assessment and diagnostic imaging

    NARCIS (Netherlands)

    Banta, H.D.

    1992-01-01

    In this paper, computerized tomography scanning and magnetic resonance imaging scanning are discussed to illustrate some aspects of health care technology assessment in the field of diagnostic imaging. Technology assessment is defined as a comprehensive form of policy research that examines short-

  16. Solar Thermal energy strategic road-map

    International Nuclear Information System (INIS)

    Hafner, Bernd; Godin, Olivier; Villier, Dominique; Petit, J.F.; Demangeon, Elsa; Laplagne, Valerie; Loyen, Richard; Mugnier, Daniel; Filloux, Alain; Frichet, Jean-Claude; Aubert, Elisabeth; Cherepanova, Margarita; Guilmin, Audrey; Dicostanzo, Catherine; Papillon, Philippe; Caccavelli, Dominique; Cholin, Xavier; Leger, Emmanuel; Gevaudan, Alain; Coulaud, Celine; Morlot, Rodolphe; Khebchache, Bouzid; Parrouffe, Jean-Michel; Clement, Daniel; Tonnet, Nicolas

    2012-11-01

    The French Environment and Energy Management Agency (ADEME) manages a fund dedicated to new energy technologies. Since 2008 this fund has funded 'research demonstrators' to implement testing of technologies that are in an experimental stage, between research and industrial deployment. ADEME coordinates a group of experts who are charged with drawing up a strategic road-map prior to each Call for Expressions of Interest. The aims of the solar thermal road-map are: - to highlight the industrial, technological, environmental and societal issues at stake; - to elaborate coherent, consistent and shared visions of the technologies and/or socio-technical systems outlined in the road-map; - to underscore the technological, organisational and socioeconomic barriers and bottlenecks to be overcome in order to achieve these visions; - to link priority research topics to a timetable of goals for technology availability and deployment that is consistent with the stated objectives; - to give priority to research needs and research demonstrators that will serve as the basis for: 1 - calls for expression of interest issued by the Research Demonstrators Fund, 2 - the research programming process at ADEME and more broadly at the Agence nationale de la recherche (ANR) and the Comite strategique national sur la recherche sur l'energie. Research priorities and needs for demonstrators are determined by the intersection of visions and bottlenecks. They also take into account industrial and research capacity in France. The road-maps may also refer to exemplary research demonstrators abroad that are in the forefront of technological progress, and make recommendations regarding industrial policy. These road-maps are the result of collective work by a group of experts appointed by the Steering Committee (Comite de pilotage, COPIL) of the Research Demonstrators Fund for new energy technologies. The members of this group are actors in research, drawn from industry, research bodies and research

  17. Technology Roadmap on Instrumentation, Control, and Human-Machine Interface to Support DOE Advanced Nuclear Energy Programs

    International Nuclear Information System (INIS)

    Donald D Dudenhoeffer; Burce P Hallbert

    2007-01-01

    Instrumentation, Controls, and Human-Machine Interface (ICHMI) technologies are essential to ensuring delivery and effective operation of optimized advanced Generation IV (Gen IV) nuclear energy systems. In 1996, the Watts Bar I nuclear power plant in Tennessee was the last U.S. nuclear power plant to go on line. It was, in fact, built based on pre-1990 technology. Since this last U.S. nuclear power plant was designed, there have been major advances in the field of ICHMI systems. Computer technology employed in other industries has advanced dramatically, and computing systems are now replaced every few years as they become functionally obsolete. Functional obsolescence occurs when newer, more functional technology replaces or supersedes an existing technology, even though an existing technology may well be in working order. Although ICHMI architectures are comprised of much of the same technology, they have not been updated nearly as often in the nuclear power industry. For example, some newer Personal Digital Assistants (PDAs) or handheld computers may, in fact, have more functionality than the 1996 computer control system at the Watts Bar I plant. This illustrates the need to transition and upgrade current nuclear power plant ICHMI technologies

  18. 76 FR 66040 - NIST Framework and Roadmap for Smart Grid Interoperability Standards, Release 2.0 (Draft...

    Science.gov (United States)

    2011-10-25

    ... National Institute of Standards and Technology NIST Framework and Roadmap for Smart Grid Interoperability... and Technology (NIST) seeks comments on the draft NIST Framework and Roadmap for Smart Grid..., 2011. The entire draft version of the NIST Framework and Roadmap for Smart Grid Interoperability...

  19. Initial Technology Assessment for the Large UV-Optical-Infrared (LUVOIR) Mission Concept Study

    Science.gov (United States)

    Bolcar, Matthew R.; Feinberg, Lee D.; France, Kevin; Rauscher, Bernard J.; Redding, David; Schiminovich, David

    2016-01-01

    The NASA Astrophysics Divisions 30-Year Roadmap prioritized a future large-aperture space telescope operating in the ultra-violet-optical-infrared wavelength regime. The Association of Universities for Research in Astronomy envisioned a similar observatory, the High Definition Space Telescope. And a multi-institution group also studied the Advanced Technology Large Aperture Space Telescope. In all three cases, a broad science case is outlined, combining general astrophysics with the search for bio-signatures via direct-imaging and spectroscopic characterization of habitable exo-planets. We present an initial technology assessment that enables such an observatory that is currently being studied for the 2020 Decadal Survey by the Large UV-Optical Infrared (LUVOIR) surveyor Science and Technology Definition Team. We present here the technology prioritization for the 2016 technology cycle and define the required technology capabilities and current state-of-the-art performance. Current, planned, and recommended technology development efforts are also reported.

  20. Initial Technology Assessment for the Large-Aperture UV-Optical-Infrared (LUVOIR) Mission Concept Study

    Science.gov (United States)

    Bolcar, Matthew R.; Feinberg, Lee; France, Kevin; Rauscher, Bernard J.; Redding, David; Schiminovich, David

    2016-01-01

    The NASA Astrophysics Division's 30-Year Roadmap prioritized a future large-aperture space telescope operating in the ultra-violet/optical/infrared wavelength regime. The Association of Universities for Research in Astronomy envisioned a similar observatory, the High Definition Space Telescope. And a multi-institution group also studied the Advanced Technology Large Aperture Space Telescope. In all three cases, a broad science case is outlined, combining general astrophysics with the search for biosignatures via direct-imaging and spectroscopic characterization of habitable exoplanets. We present an initial technology assessment that enables such an observatory that is currently being studied for the 2020 Decadal Survey by the Large UV/Optical/Infrared (LUVOIR) surveyor Science and Technology Definition Team. We present here the technology prioritization for the 2016 technology cycle and define the required technology capabilities and current state-of-the-art performance. Current, planned, and recommended technology development efforts are also reported.

  1. A roadmap for innovation.

    Science.gov (United States)

    Hodgetts, Timothy J

    2014-06-01

    Medicine has historically advanced during conflict, but military medical services have consistently regressed during peace. As over a decade of campaigning in Iraq and Afghanistan draws to a close, securing the legacy of hard won clinical lessons and retaining flexibility to adapt to new patterns of illness and injury during contingency is critical. Central to sustaining exceptional outcomes for future operations and to maintaining the current position of the Defence Medical Services as providers of clinical excellence is retaining the capability to innovate. This capability must extend across the spectrum of clinical innovation-concepts, guidelines, equipment (invention and adoption), curricula (design, assessment and refinement), research and Defence diplomacy. To achieve this requires a strategy, a 'roadmap', with a clear vision, end state and centres of gravity (core strengths that must be protected). The direction for innovation will be guided by emergent analysis of the future character of military medicine. Success will be determined by ensuring the conditions are met to protect and enhance the existing 'winning culture'. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  2. Health technology assessment in Finland

    DEFF Research Database (Denmark)

    Mäkelä, Marjukka; Roine, Risto P

    2010-01-01

    , with special responsibility in providing assessments to underpin national policies in screening. External evaluations enhanced the rapid growth. In the Finnish environment, decision making on health technologies is extremely decentralized, so Finohta has developed some practical tools for implementing HTA......Since the 1990s, health policy makers in Finland have been supportive of evidence-based medicine and approaches to implement its results. The Finnish Office for Health Technology Assessment (Finohta) has grown from a small start in 1995 to a medium-sized health technology assessment (HTA) agency...... findings. The Managed Uptake of Medical Methods program links the hospital districts to agree on introduction of technologies. The Ohtanen database provides Finnish-language summaries of major assessments made in other countries....

  3. Health technology assessment in Finland

    DEFF Research Database (Denmark)

    Mäkelä, Marjukka; Roine, Risto P

    2010-01-01

    Since the 1990s, health policy makers in Finland have been supportive of evidence-based medicine and approaches to implement its results. The Finnish Office for Health Technology Assessment (Finohta) has grown from a small start in 1995 to a medium-sized health technology assessment (HTA) agency......, with special responsibility in providing assessments to underpin national policies in screening. External evaluations enhanced the rapid growth. In the Finnish environment, decision making on health technologies is extremely decentralized, so Finohta has developed some practical tools for implementing HTA...... findings. The Managed Uptake of Medical Methods program links the hospital districts to agree on introduction of technologies. The Ohtanen database provides Finnish-language summaries of major assessments made in other countries....

  4. Biological Environmental Sampling Technologies Assessment

    Science.gov (United States)

    2015-12-01

    assay performance for the detection of target pathogens or protein biomarkers in liquid matrices. The nanomanipulation technology provides a dramatic...personal protective equipment qPCR quantitative polymerase chain reaction RAID Rapid Assessment Initial Detection kit RFI request for information RT...Carrie Poore Robert Dorsey RESEARCH AND TECHNOLOGY DIRECTORATE Aaron Chonko David Grieco JOINT BIOLOGICAL TACTICAL DETECTION SYSTEM

  5. Current status of the TSensor systems roadmap

    OpenAIRE

    Walsh, Steven Thomas; Bryzek, Janusz; Pisano, Albert P.

    2014-01-01

    We apply our work from the contemporary pharmaceutical industry to generate a third generation-style technology roadmap for TSensor Systems. First we identify drivers and consortia. We then identify relevant technology components, namely multiple root technologies, multiple unit cells, multiple critical dimensions, strict boundary conditions constraining innovations and products, a heightened importance of drivers, and a more prominent role for consortia. These components include chips and na...

  6. Technical Comparative Analysis of "Best of Breed" Turnkey Si-Based Processes and Equipment, to be Used to Produce a Combined Multi-entity Research and Development Technology Roadmap for Thick and Thin Silicon PV

    Energy Technology Data Exchange (ETDEWEB)

    Hovel, Harold [The Solar Energy Consortium, Kingston, NY (United States); Prettyman, Kevin [The Solar Energy Consortium, Kingston, NY (United States)

    2015-03-27

    A side-by-side analysis was done on then currently available technology, along with roadmaps to push each particular option forward. Variations in turnkey line processes can and do result in finished solar device performance. Together with variations in starting material quality, the result is a distribution of effciencies. Forensic analysis and characterization of each crystalline Si based technology will determine the most promising approach with respect to cost, efficiency and reliability. Forensic analysis will also shed light on the causes of binning variations. Si solar cells were forensically analyzed from each turn key supplier using a host of techniques

  7. Hydrogen energy and fuel cells. Strategic Roadmap

    International Nuclear Information System (INIS)

    Moran, Pascal; Gernot, Eric; Masset, Franck; Pierre, Helene; Hody, Stephane; Julien, Marianne; Bouchard, Patrick; Lima, Alexandre; Aubree, Marc; Declerck, Bernard; Jehan, Michel; Mulard, Philippe; Le Breton, Daniel; Grouset, Didier; Lucoq, Samuel; Maio, Patrick; Lanoix, Jean-Christophe; Tisserand, Perrine; Beuzit, Pierre; Junker, Michel; Meslin, Frederic; Derive, Claude; Altman, Matthias; Vandenborre, Hugo; Pastor, Jean-Marc; Biasotto, Jerome; SOLBES, Frederic; Lucchese, Paul; Le Duigou, Alain; Lamy, Claude; Petit, Florent; Rojey, Alexandre; Strang, Axel; Frois, Bernard; Clement, Daniel; Filmon, Karine; Antoine, Loic; Bodineau, Luc; Gioria, Michel; Barbier, Cecile

    2011-04-01

    Since 2010, the ADEME (The French Environment and Energy Management Agency) has been managing four programmes within the scope of 'Future Investments'. Groups of experts from research from various industrial fields, research organisms and research programming and financing agencies are responsible, within the scope of collective works, for producing strategic road-maps. These are used to launch Calls for Expressions of Interest (CEI). The purpose of these road-maps is to: - highlight the industrial, technological, environmental and societal issues; - draw up coherent, shared visions of technologies and the socio-technical system in question; - identify the technological, organisational and socio-economic locks to be overcome; - associate time-based objectives with the priority research topics in terms of technological availability and deployment; - prioritise needs of the industrial research, research demonstrator, pre-industrial experimentation and technology test platform, which then act as a basis for: - drawing up CEIs; - programming research within the ADEME and other institutions such as the French National Research Agency (ANR), the French national strategic committee for energy research (Comite strategique national sur la recherche energie) or the French national alliance for the coordination of energy research (ANCRE). These research and experimentation priorities originate from the junction of the visions and locks, and they also take into account French capacities in the fields of research and industry. Road-maps can also refer to exemplary experiments conducted abroad and make recommendations in terms of industrial policy. This road-map shall be regularly updated. In order to draw up this road-map, the ADEME consulted with a group of experts from major private contractors, a contaminated wasteland developer, stakeholders involved in pollution control and public research and finally the ADEME

  8. Roadmapping for improving cocoa postharvest management

    Directory of Open Access Journals (Sweden)

    Adriana del Pilar Sánchez Vargas

    2008-09-01

    Full Text Available This article presents the methodology and results which led to preparing post-harvesting technological development strategies for cocoa management which emerged from identifying problems such as deficient cocoa quality and insufficient fermentation of the beans according to international market requirements as shown in the poor technological development in Colombia’s main co-coa producing areas. This situation led to using a technological management tool such as roadmapping orientated towards for-mulating strategies for the technological development of cocoa postharvest management. The methodological process so im-plemented involved experts’ ongoing participation in enriching and validating results whilst four phases were implemented: per-formance analysis, gap analysing, structuring roadmapping and formulating cocoa postharvest technological development stra-tegies. The results obtained in this investigation were directed towards improving Colombian cocoa sector competitiveness in in-ternal and external markets.

  9. Heat Roadmap Europe

    DEFF Research Database (Denmark)

    Connolly, David; Mathiesen, Brian Vad; Lund, Henrik

    2015-01-01

    This document is a summary of the key technical inputs for the modelling of the heat strategy for Europe outlined in the latest Heat Roadmap Europe studies [1, 2]. These studies quantify the impact of alternative heating strategies for Europe in 2030 and 2050. The study is based on geographical...... information systems (GIS) and energy system analyses. In this report, the inputs for other modelling tools such as PRIMES are presented, in order to enable other researches to generate similar heating scenarios for Europe. Although Heat Roadmap Europe presents a complete heat strategy for Europe, which...... to model increased penetrations of district heating in the EU energy system in other energy planning tools, such as the PRIMES and JRC-EU-TIMES tools. The key results from the Heat Roadmap Europe studies are that:  Heat savings have a key role to play, but there is a socio-economic limit: after reducing...

  10. Roadmap on plasmonics

    Science.gov (United States)

    Stockman, Mark I.; Kneipp, Katrin; Bozhevolnyi, Sergey I.; Saha, Soham; Dutta, Aveek; Ndukaife, Justus; Kinsey, Nathaniel; Reddy, Harsha; Guler, Urcan; Shalaev, Vladimir M.; Boltasseva, Alexandra; Gholipour, Behrad; Krishnamoorthy, Harish N. S.; MacDonald, Kevin F.; Soci, Cesare; Zheludev, Nikolay I.; Savinov, Vassili; Singh, Ranjan; Groß, Petra; Lienau, Christoph; Vadai, Michal; Solomon, Michelle L.; Barton, David R., III; Lawrence, Mark; Dionne, Jennifer A.; Boriskina, Svetlana V.; Esteban, Ruben; Aizpurua, Javier; Zhang, Xiang; Yang, Sui; Wang, Danqing; Wang, Weijia; Odom, Teri W.; Accanto, Nicolò; de Roque, Pablo M.; Hancu, Ion M.; Piatkowski, Lukasz; van Hulst, Niek F.; Kling, Matthias F.

    2018-04-01

    Plasmonics is a rapidly developing field at the boundary of physical optics and condensed matter physics. It studies phenomena induced by and associated with surface plasmons—elementary polar excitations bound to surfaces and interfaces of good nanostructured metals. This Roadmap is written collectively by prominent researchers in the field of plasmonics. It encompasses selected aspects of nanoplasmonics. Among them are fundamental aspects, such as quantum plasmonics based on the quantum-mechanical properties of both the underlying materials and the plasmons themselves (such as their quantum generator, spaser), plasmonics in novel materials, ultrafast (attosecond) nanoplasmonics, etc. Selected applications of nanoplasmonics are also reflected in this Roadmap, in particular, plasmonic waveguiding, practical applications of plasmonics enabled by novel materials, thermo-plasmonics, plasmonic-induced photochemistry and photo-catalysis. This Roadmap is a concise but authoritative overview of modern plasmonics. It will be of interest to a wide audience of both fundamental physicists and chemists, as well as applied scientists and engineers.

  11. Innovative nuclear energy systems roadmap

    International Nuclear Information System (INIS)

    2007-12-01

    Developing nuclear energy that is sustainable, safe, has little waste by-product, and cannot be proliferated is an extremely vital and pressing issue. To resolve the four issues through free thinking and overall vision, research activities of 'innovative nuclear energy systems' and 'innovative separation and transmutation' started as a unique 21st Century COE Program for nuclear energy called the Innovative Nuclear Energy Systems for Sustainable Development of the World, COE-INES. 'Innovative nuclear energy systems' include research on CANDLE burn-up reactors, lead-cooled fast reactors and using nuclear energy in heat energy. 'Innovative separation and transmutation' include research on using chemical microchips to efficiently separate TRU waste to MA, burning or destroying waste products, or transmuting plutonium and other nuclear materials. Research on 'nuclear technology and society' and 'education' was also added in order for nuclear energy to be accepted into society. COE-INES was a five-year program ending in 2007. But some activities should be continued and this roadmap detailed them as a rough guide focusing inventions and discoveries. This technology roadmap was created for social acceptance and should be flexible to respond to changing times and conditions. (T. Tanaka)

  12. Proceedings of the Technology Roadmap Workshop on Communication and Control Systems for Distributed Energy Implementation and Testing

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2002-05-01

    More than 50 experts from energy and information technology industries, Federal and State government agencies, universities, and National Laboratories participated in the “Communication and Control Systems for Distributed Energy Implementation and Testing Workshop” in Reston, Virginia, on May 14-15, 2002. This was a unique workshop in that, for the first time, representatives from the information technology sector and those from energy-related industries, Federal and State government agencies, universities, and National Laboratories, gathered to discuss these issues and develop a set of action-oriented implementation strategies. A planning committee of industry, consultant, and government representatives laid the groundwork for the workshop by identifying key participants and developing an appropriate agenda. This document reflects the ideas and priorities discussed by workshop participants.

  13. National hydrogen energy roadmap

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2002-11-01

    This report was unveiled by Energy Secretary Spencer Abraham in November 2002 and provides a blueprint for the coordinated, long-term, public and private efforts required for hydrogen energy development. Based on the results of the government-industry National Hydrogen Energy Roadmap Workshop, held in Washington, DC on April 2-3, 2002, it displays the development of a roadmap for America's clean energy future and outlines the key barriers and needs to achieve the hydrogen vision goals defined in

  14. Roadmap on optical sensors.

    Science.gov (United States)

    Ferreira, Mário F S; Castro-Camus, Enrique; Ottaway, David J; López-Higuera, José Miguel; Feng, Xian; Jin, Wei; Jeong, Yoonchan; Picqué, Nathalie; Tong, Limin; Reinhard, Björn M; Pellegrino, Paul M; Méndez, Alexis; Diem, Max; Vollmer, Frank; Quan, Qimin

    2017-08-01

    Sensors are devices or systems able to detect, measure and convert magnitudes from any domain to an electrical one. Using light as a probe for optical sensing is one of the most efficient approaches for this purpose. The history of optical sensing using some methods based on absorbance, emissive and florescence properties date back to the 16th century. The field of optical sensors evolved during the following centuries, but it did not achieve maturity until the demonstration of the first laser in 1960. The unique properties of laser light become particularly important in the case of laser-based sensors, whose operation is entirely based upon the direct detection of laser light itself, without relying on any additional mediating device. However, compared with freely propagating light beams, artificially engineered optical fields are in increasing demand for probing samples with very small sizes and/or weak light-matter interaction. Optical fiber sensors constitute a subarea of optical sensors in which fiber technologies are employed. Different types of specialty and photonic crystal fibers provide improved performance and novel sensing concepts. Actually, structurization with wavelength or subwavelength feature size appears as the most efficient way to enhance sensor sensitivity and its detection limit. This leads to the area of micro- and nano-engineered optical sensors. It is expected that the combination of better fabrication techniques and new physical effects may open new and fascinating opportunities in this area. This roadmap on optical sensors addresses different technologies and application areas of the field. Fourteen contributions authored by experts from both industry and academia provide insights into the current state-of-the-art and the challenges faced by researchers currently. Two sections of this paper provide an overview of laser-based and frequency comb-based sensors. Three sections address the area of optical fiber sensors, encompassing both

  15. Roadmap on optical sensors

    Science.gov (United States)

    Ferreira, Mário F. S.; Castro-Camus, Enrique; Ottaway, David J.; López-Higuera, José Miguel; Feng, Xian; Jin, Wei; Jeong, Yoonchan; Picqué, Nathalie; Tong, Limin; Reinhard, Björn M.; Pellegrino, Paul M.; Méndez, Alexis; Diem, Max; Vollmer, Frank; Quan, Qimin

    2017-08-01

    Sensors are devices or systems able to detect, measure and convert magnitudes from any domain to an electrical one. Using light as a probe for optical sensing is one of the most efficient approaches for this purpose. The history of optical sensing using some methods based on absorbance, emissive and florescence properties date back to the 16th century. The field of optical sensors evolved during the following centuries, but it did not achieve maturity until the demonstration of the first laser in 1960. The unique properties of laser light become particularly important in the case of laser-based sensors, whose operation is entirely based upon the direct detection of laser light itself, without relying on any additional mediating device. However, compared with freely propagating light beams, artificially engineered optical fields are in increasing demand for probing samples with very small sizes and/or weak light-matter interaction. Optical fiber sensors constitute a subarea of optical sensors in which fiber technologies are employed. Different types of specialty and photonic crystal fibers provide improved performance and novel sensing concepts. Actually, structurization with wavelength or subwavelength feature size appears as the most efficient way to enhance sensor sensitivity and its detection limit. This leads to the area of micro- and nano-engineered optical sensors. It is expected that the combination of better fabrication techniques and new physical effects may open new and fascinating opportunities in this area. This roadmap on optical sensors addresses different technologies and application areas of the field. Fourteen contributions authored by experts from both industry and academia provide insights into the current state-of-the-art and the challenges faced by researchers currently. Two sections of this paper provide an overview of laser-based and frequency comb-based sensors. Three sections address the area of optical fiber sensors, encompassing both

  16. United States Air Force (USAF) Semantic Interoperability Capabilities Based Assessment and Technology Roadmap

    Science.gov (United States)

    2007-03-01

    features Federated Search (providing services to find and aggregate information across GIG enterprise data sources); Enterprise Catalog (providing...Content Discovery Federated Search Portlet Users Guide v0.4.3 M16 25-Apr-05 NCES Mediation Core Enterprise Services SDK v0.5.0 M17 25-Apr-05 NCES

  17. Chemicals Industry New Process Chemistry Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2000-08-01

    The Materials Technology I workshop was held in November 1998 to address future research needs for materials technology that will support the chemical industry. Areas covered included disassembly, recovery, reuse and renewable technology; new materials; and materials measurement and characterization. The Materials Technology II workshop was held in September 1999 and covered additives, modeling and prediction and an additional segment on new materials. Materials Technology Institute (MTI) for the Chemical Process Industries, Inc. and Air Products & Chemicals lead the workshops. The Materials Technology Roadmap presents the results from both workshops.

  18. Engineering and technology talent for innovation and knowledge-based economies competencies, leadership, and a roadmap for implementation

    CERN Document Server

    Abdulwahed, Mahmoud

    2017-01-01

    This book introduces and analyzes the models for engineering leadership and competency skills, as well as frameworks for industry-academia collaboration and is appropriate for students, researchers, and professionals interested in continuous professional development. The authors look at the organizational structures of engineering education in knowledge-based economies and examine the role of innovation and how it is encouraged in schools. It also provides a methodological framework and toolkit for investigating the needs of engineering and technology skills in national contexts. A detailed empirical case study is included that examines the leadership competencies that are needed in knowledge-based economies and how one university encourages these in their program. The book concludes with conceptual modeling and proposals of specific organizational structures for implementation in engineering schools, in order to enable the development of necessary skills for future engineering graduates.

  19. Roadmap of Infinite Results

    DEFF Research Database (Denmark)

    Srba, Jiří

    2002-01-01

    This paper provides a comprehensive summary of equivalence checking results for infinite-state systems. References to the relevant papers will be updated continuously according to the development in the area. The most recent version of this document is available from the web-page http://www.brics.dk/~srba/roadmap....

  20. Materials Technical Team Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-08-01

    Roadmap identifying the efforts of the Materials Technical Team (MTT) to focus primarily on reducing the mass of structural systems such as the body and chassis in light-duty vehicles (including passenger cars and light trucks) which enables improved vehicle efficiency regardless of the vehicle size or propulsion system employed.

  1. Electrochemical Energy Storage Technical Team Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-06-01

    This U.S. DRIVE electrochemical energy storage roadmap describes ongoing and planned efforts to develop electrochemical energy storage technologies for plug-in electric vehicles (PEVs). The Energy Storage activity comprises a number of research areas (including advanced materials research, cell level research, battery development, and enabling R&D which includes analysis, testing and other activities) for advanced energy storage technologies (batteries and ultra-capacitors).

  2. Proceedings Technology Enhanced Assessment conference

    NARCIS (Netherlands)

    Joosten-ten Brinke, Desirée; Laanpere, Mart

    2018-01-01

    This book constitutes the proceedings of the 19th International Conference on Technology Enhanced Assessment, TEA 2016, held in Tallinn, Estonia, in October 2016. The 16 full papers presented were carefully selected from 38 submissions. They are centered around topics like measurement of higher

  3. Knowledge in health technology assessment

    DEFF Research Database (Denmark)

    Tjørnhøj-Thomsen, Tine; Hansen, Helle Ploug

    2011-01-01

    Health systems are placing more and more emphasis on designing and delivering services that are focused on the patient, and there is a growing interest in patient aspects of health policy research and health technology assessment (HTA). Only a few HTA agencies use and invest in scientific methods...

  4. Health technology assessment in Greece.

    Science.gov (United States)

    Liaropoulos, L; Kaitelidou, D

    2000-01-01

    In 1983 a health reform aimed to assure universal coverage and equity in the distribution of services in Greece. The reform implied state responsibility for the financing and delivery of services and a reduction of the private sector. The model was a Bismarckian scheme for social insurance. However, healthcare delivery remains fragmented and uncoordinated and the private sector is getting stronger. The dominant payment system is fee-for-service for the private sector and administered prices and salaries for public hospitals and social insurance funds. The many insurers have their own eligibility requirements, validation procedures, etc. Coverage of services by social security funds, probably among the most comprehensive in Europe, is determined more on historical and political grounds than on efficiency or cost-effectiveness. The system is plagued by problems, including geographical inequalities, overcentralization, bureaucratic management, poor incentives in the public sector, open-ended financing, inefficient use of hospital beds, and lack of cost-effectiveness. There are no specific legal provisions for the control of health technology. Technologies are introduced without standards or formal consideration of needs. There are no current efforts to control health technology in Greece. However, health technology assessment (HTA) has gained increasing visibility. In 1997 a law provided for a new government agency responsible for quality control, economic evaluation of health services, and HTA. The hope is that the new law may introduce evaluation and assessment elements into health policy formulation and assure that cost effectiveness, quality, and appropriate use of health technology will receive more attention.

  5. Augmented Reality Tower Technology Assessment

    Science.gov (United States)

    Reisman, Ronald J.; Brown, David M.

    2009-01-01

    Augmented Reality technology may help improve Air Traffic Control Tower efficiency and safety during low-visibility conditions. This paper presents the assessments of five off-duty controllers who shadow-controlled' with an augmented reality prototype in their own facility. Initial studies indicated unanimous agreement that this technology is potentially beneficial, though the prototype used in the study was not adequate for operational use. Some controllers agreed that augmented reality technology improved situational awareness, had potential to benefit clearance, control, and coordination tasks and duties and could be very useful for acquiring aircraft and weather information, particularly aircraft location, heading, and identification. The strongest objections to the prototype used in this study were directed at aircraft registration errors, unacceptable optical transparency, insufficient display performance in sunlight, inadequate representation of the static environment and insufficient symbology.

  6. Vehicle Battery Safety Roadmap Guidance

    Energy Technology Data Exchange (ETDEWEB)

    Doughty, D. H.

    2012-10-01

    The safety of electrified vehicles with high capacity energy storage devices creates challenges that must be met to assure commercial acceptance of EVs and HEVs. High performance vehicular traction energy storage systems must be intrinsically tolerant of abusive conditions: overcharge, short circuit, crush, fire exposure, overdischarge, and mechanical shock and vibration. Fail-safe responses to these conditions must be designed into the system, at the materials and the system level, through selection of materials and safety devices that will further reduce the probability of single cell failure and preclude propagation of failure to adjacent cells. One of the most important objectives of DOE's Office of Vehicle Technologies is to support the development of lithium ion batteries that are safe and abuse tolerant in electric drive vehicles. This Roadmap analyzes battery safety and failure modes of state-of-the-art cells and batteries and makes recommendations on future investments that would further DOE's mission.

  7. ASSESSMENT OF GALLIUM OXIDE TECHNOLOGY

    Science.gov (United States)

    2017-08-01

    heterojunction to implement p-n junctions. This would bring a large number of new device types into play, especially for power electronics where Ga2O3 is...AFRL-RY-WP-TR-2017-0167 ASSESSMENT OF GALLIUM OXIDE TECHNOLOGY Burhan Bayraktaroglu Devices for Sensing Branch Aerospace... Devices for Sensing Branch Aerospace Component & Subsystems Division *//Signature// ROSS W. DETTMER Chief Devices for Sensing Branch

  8. National Hydrogen Roadmap Workshop Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    None

    2002-04-01

    This document summarizes the presentations and suggestions put forth by officials, industry experts and policymakers in their efforts to come together to develop a roadmap for America''s clean energy future and outline the key barriers and needs to achieve the hydrogen vision. The National Hydrogen Roadmap Workshop was held April 2-3, 2002. These proceedings were compiled into a formal report, The National Hydrogen Energy Roadmap, which is also available online.

  9. Electrical and Electronics Technical Team Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-06-01

    The Electrical and Electronics Technical Team’s (EETT's) mission is to enable cost-effective, smaller, lighter, and efficient power electronics and electric motors for electric traction drive systems (ETDSs) while maintaining performance of internal combustion engine (ICE)-based vehicles. The EETT also identifies technology gaps, establishes R&D targets, develops a roadmap to achieve technical targets and goals, and evaluates the R&D progress toward meeting the established R&D targets and goals.

  10. Roadmap toward addressing and communicating uncertainty in LCA

    DEFF Research Database (Denmark)

    Laurin, Lise; Vigon, Bruce; Fantke, Peter

    2017-01-01

    considerable uncertainty and variability at different assessment phases. These contributions have led to questions about the ability of LCA results to be used in decision-making. Mainly, variability is related to spatiotemporal, technological, and interspecies and inter-individual differences, while......Life Cycle Assessment (LCA) models for quantifying emissions and resources used as part of the life cycle inventory (LCI) step and for characterizing related impacts on human health, ecosystem quality, and natural resources as part of the life cycle impact assessment (LCIA) step together contribute......, model uncertainty, and uncertainty related to choices and human errors. As part of the LCA Capability Roadmap, a committee of nearly 40 contributors under the auspices of the SETAC North America LCA Interest Group is currently working to identify research needs in the area of ill...

  11. NASA's New Thermal Management Systems Roadmap; Whats in it, What it Means

    Science.gov (United States)

    Swanson, Ted

    2016-01-01

    In July of 2015 NASA publically released a new set of Technology Area Roadmaps that will be used to help guide future NASA-funded technology development efforts. One of these was the Thermal Management Systems Roadmap, often identified as TA14. This Roadmap identifies the time sequencing and interdependencies of high priority, advanced thermal control technology for the next 5 to 20 years. Available funding limits the development of new technology. The Roadmaps are the first step in the process of prioritizing HQ-supported technology funding. The 2015 Roadmaps are focused on planned mission architectures and needs, as identified in the NRC-led science Decadals and HEOMD's Design Reference Missions. Additionally, the 2015 Roadmaps focus on "applied " R&D as opposed to more basic research. The NASA Mission Directorates were all closely involved in development of 2015 Roadmaps, and an extensive external review was also conducted. This talk will discuss the Technology Roadmaps in general, and then focus on the specific technologies identified for TA 14, Thermal Management Systems.

  12. 2016-2017 Status Assessment and Update on the Wind Vision Roadmap: Findings from Topical Working Sessions, April 2016 - March 2017

    Energy Technology Data Exchange (ETDEWEB)

    Lantz, Eric J. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Mone, Christopher D. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); DeMeo, Edgar [Renewable Energy Consulting Services, Inc., Palo Alto, CA (United States)

    2017-10-03

    IIn March 2015, the U.S. Department of Energy (DOE) released Wind Vision: A New Era for Wind Power in the United States (DOE 2015), which explores a scenario in which wind provides 10 percent of U.S. electricity in 2020, 20 percent in 2030, and 35 percent in 2050. The Wind Vision report also includes a roadmap of recommended actions aimed at pursuit of the vision and its underlying wind-deployment scenario. The roadmap was compiled by the Wind Vision project team, which included representatives from the industrial, electric-power, government-laboratory, academic, environmental-stewardship, regulatory, and permitting stakeholder groups. The roadmap describes high-level activities suitable for all sectors with a stake in wind power and energy development. It is intended to be a 'living document,' and DOE expects to engage the wind community from time to time to track progress.

  13. Health technology assessment in Mexico.

    Science.gov (United States)

    Gómez-Dantés, Octavio; Frenk, Julio

    2009-07-01

    The history of health technology assessment (HTA) in Mexico is examined, starting with the efforts to incorporate this topic into the policy agenda and culminating with the recent creation of a specialized public agency. Information was gathered through a bibliographic search and interviews with actors involved in HTA in Mexico. HTA efforts were developed in Mexico since the mid-1980s with the participation both of academics and of policy makers, a relationship that eventually led to the creation of the Center for Technological Excellence within the Ministry of Health. Institutionalization of HTA in resource-constrained settings requires the development of a critical mass of researchers involved in this field, the implementation of information efforts, and the establishment of strong relationships between HTA experts and policy makers.

  14. Wireless technology for ABC Assessment

    DEFF Research Database (Denmark)

    Kristensen, Margit; Kyng, Morten; Christensen, Erika Frischknecht

    be just beside a victim to assess the ABC status. Consequently - in situations with many victims - monitoring equipment is only used for the (few) most seriously injured. Our ongoing research builds on data collected through extensive field studies and is described in several published papers. We......  In medical emergency service (EMS) the ABC status (Airway-Breathing-Circulation) of victims is essential in the decision making process regarding prioritizing and treatment. Today's use of information technology does, however, not inform directly about "A" and "B". The parameters are evaluated...... indirectly through assessment of collected biosensor data, such as ECG, and directly by the rescuer regarding how the patient looks and sounds. Moreover, the monitoring equipment used today is connected with displays by wires and thus only utilizes one display at a time. This means that the rescuers must...

  15. Technology modernization assessment flexible automation

    Energy Technology Data Exchange (ETDEWEB)

    Bennett, D.W.; Boyd, D.R.; Hansen, N.H.; Hansen, M.A.; Yount, J.A.

    1990-12-01

    The objectives of this report are: to present technology assessment guidelines to be considered in conjunction with defense regulations before an automation project is developed to give examples showing how assessment guidelines may be applied to a current project to present several potential areas where automation might be applied successfully in the depot system. Depots perform primarily repair and remanufacturing operations, with limited small batch manufacturing runs. While certain activities (such as Management Information Systems and warehousing) are directly applicable to either environment, the majority of applications will require combining existing and emerging technologies in different ways, with the special needs of depot remanufacturing environment. Industry generally enjoys the ability to make revisions to its product lines seasonally, followed by batch runs of thousands or more. Depot batch runs are in the tens, at best the hundreds, of parts with a potential for large variation in product mix; reconfiguration may be required on a week-to-week basis. This need for a higher degree of flexibility suggests a higher level of operator interaction, and, in turn, control systems that go beyond the state of the art for less flexible automation and industry in general. This report investigates the benefits and barriers to automation and concludes that, while significant benefits do exist for automation, depots must be prepared to carefully investigate the technical feasibility of each opportunity and the life-cycle costs associated with implementation. Implementation is suggested in two ways: (1) develop an implementation plan for automation technologies based on results of small demonstration automation projects; (2) use phased implementation for both these and later stage automation projects to allow major technical and administrative risk issues to be addressed. 10 refs., 2 figs., 2 tabs. (JF)

  16. HVDC power transmission technology assessment

    Energy Technology Data Exchange (ETDEWEB)

    Hauth, R.L.; Tatro, P.J.; Railing, B.D. [New England Power Service Co., Westborough, MA (United States); Johnson, B.K.; Stewart, J.R. [Power Technologies, Inc., Schenectady, NY (United States); Fink, J.L.

    1997-04-01

    The purpose of this study was to develop an assessment of the national utility system`s needs for electric transmission during the period 1995-2020 that could be met by future reduced-cost HVDC systems. The assessment was to include an economic evaluation of HVDC as a means for meeting those needs as well as a comparison with competing technologies such as ac transmission with and without Flexible AC Transmission System (FACTS) controllers. The role of force commutated dc converters was to be assumed where appropriate. The assessment begins by identifying the general needs for transmission in the U.S. in the context of a future deregulated power industry. The possible roles for direct current transmission are then postulated in terms of representative scenarios. A few of the scenarios are illustrated with the help of actual U.S. system examples. non-traditional applications as well as traditional applications such as long lines and asynchronous interconnections are discussed. The classical ``break-even distance`` concept for comparing HVDC and ac lines is used to assess the selected scenarios. The impact of reduced-cost converters is reflected in terms of the break-even distance. This report presents a comprehensive review of the functional benefits of HVDC transmission and updated cost data for both ac and dc system components. It also provides some provocative thoughts on how direct current transmission might be applied to better utilize and expand our nation`s increasingly stressed transmission assets.

  17. Technology-assisted dietary assessment

    Science.gov (United States)

    Zhu, Fengqing; Mariappan, Anand; Boushey, Carol J.; Kerr, Deb; Lutes, Kyle D.; Ebert, David S.; Delp, Edward J.

    2008-02-01

    Dietary intake provides valuable insights for mounting intervention programs for prevention of disease. With growing concern for adolescent obesity, the need to accurately measure diet becomes imperative. Assessment among adolescents is problematic as this group has irregular eating patterns and have less enthusiasm for recording food intake. Preliminary studies among adolescents suggest that innovative use of technology may improve the accuracy of diet information from young people. In this paper, we propose a novel food record method using a mobile device that will provide an accurate account of daily food and nutrient intake among adolescents. Our approach includes the use of image analysis tools for identification and quantification of food consumption. Images obtained before and after food is consumed can be used to estimate the diet of an individual. In this paper we describe our initial results and indicate the potential of the proposed system.

  18. Assessment of US industry's technology trends and new technology requirements

    Science.gov (United States)

    1984-01-01

    The utility and effectiveness of a novel approach (the Applications Development, or AD approach), intended to augment the efficiency of NASA's technology utilization (TU) through dissemination of NASA technologies and joint technology development efforts with U.S. industry is tested. The innovative AD approach consists of the following key elements: selection of NASA technologies appearing to have leading edge attributes; interaction with NASA researchers to assess the characteristics and quality of each selected technology; identification of industry's needs in the selected technology areas; structuring the selected technologies in terms of specifications and standards familiar to industry (industrial Spec. Sheets); identification and assessment of industry's interest in the specific selected NASA technologies, utilizing the greatly facilitated communication made possible by the availability of the industrial Spec. Sheets; and matching selected NASA technologies with the needs of selected industries.

  19. Iowa DOT library services, collection & technology assessment.

    Science.gov (United States)

    2014-07-01

    Assesses the impact of library services on research projects, proposes methods to improve the impact of : library services on research projects, assesses current library technology systems and proposes upgrades, : assesses current library collection ...

  20. The ethics of assessing health technologies

    NARCIS (Netherlands)

    Wilt, G.J. van der; Reuzel, R.; Banta, H.D.

    2000-01-01

    Health technology assessment (HTA) consists of the systematic study of the consequences of the introduction or continued use of the technology in a particular context, with the explicit objective to arrive at a judgment of the value or merit of the technology. Ideally, it is aimed at assessing all

  1. Ethical perspectives on health technology assessment.

    NARCIS (Netherlands)

    Have, H.A.M.J. ten

    2004-01-01

    This study analyses why ethical aspects play a minor role in health technology assessment (HTA) studies, even when comprehensive approaches of technology assessment are advocated. Technology is often regarded as a value-neutral tool. At the same time, bioethics is dominated by an engineering model.

  2. Heat Roadmap Europe 1

    DEFF Research Database (Denmark)

    Connolly, David; Mathiesen, Brian Vad; Østergaard, Poul Alberg

    2012-01-01

    Heat Roadmap Europe (Pre-study 1) investigates the role of district heating in the EU27 energy system by mapping local conditions across Europe, identifying the potential for district heating expansion, and subsequently simulating the potential resource in an hourly model of the EU27 energy system....... In 2010, approximately 12% of the space heating demand in Europe is met by district heating, but in this study four alternative scenarios are considered for the EU27 energy system: 1. 2010 with 30% district heating 2. 2010 with 50% district heating 3. 2030 with 30% district heating 4. 2050 with 50......% district heating These scenarios are investigated in two steps. Firstly, district heating replaces individual boilers by converting condensing power plants to combined heat and power plants (CHP) to illustrate how district heating improves the overall efficiency of the energy system. In the second step...

  3. Heat Roadmap Europe

    DEFF Research Database (Denmark)

    Connolly, David; Lund, Henrik; Mathiesen, Brian Vad

    2014-01-01

    indicate that with district heating, the EU energy system will be able to achieve the same reductions in primary energy supply and carbon dioxide emissions as the existing alternatives proposed. However, with district heating these goals can be achieved at a lower cost, with heating and cooling costs......Six different strategies have recently been proposed for the European Union (EU) energy system in the European Commission's report, Energy Roadmap 2050. The objective for these strategies is to identify how the EU can reach its target of an 80% reduction in annual greenhouse gas emissions in 2050...... compared to 1990 levels. None of these scenarios involve the large-scale implementation of district heating, but instead they focus on the electrification of the heating sector (primarily using heat pumps) and/or the large-scale implementation of electricity and heat savings. In this paper, the potential...

  4. Modelling in Medical Technology Assessment

    NARCIS (Netherlands)

    B.C. Michel (Bowine)

    1996-01-01

    textabstractHealth care is a rapidly developing field in which new technologies are introduced continuously. Not all new technologies have the same impact however: most represent only small changes in existing technologies, whereas only a few - like organ transplants - really are revolutionary new

  5. ASSESSMENT OF QUALITY OF INNOVATIVE TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Larisa Alexejevna Ismagilova

    2016-12-01

    Full Text Available We consider the topical issue of implementation of innovative technologies in the aircraft engine building industry. In this industry, products with high reliability requirements are developed and mass-produced. These products combine the latest achievements of science and technology. To make a decision on implementation of innovative technologies, a comprehensive assessment is carried out. It affects the efficiency of the innovations realization. In connection with this, the assessment of quality of innovative technologies is a key aspect in the selection of technological processes for their implementation. Problems concerning assessment of the quality of new technologies and processes of production are considered in the suggested method with respect to new positions. The developed method of assessing the quality of innovative technologies stands out for formed system of the qualimetric characteristics ensuring the effectiveness, efficiency, adaptability of innovative technologies and processes. The feature of suggested system of assessment is that it is based on principles of matching and grouping of quality indicators of innovative technologies and the characteristics of technological processes. The indicators are assessed from the standpoint of feasibility, technologies competiveness and commercial demand of products. In this paper, we discuss the example of implementing the approach of assessing the quality of the innovative technology of high-tech products such as turbine aircraft engine.

  6. Liquefaction technology assessment. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1979-05-01

    A survey of coal liquefaction technology and analysis of projected relative performance of high potential candidates has been completed and the results are reported here. The key objectives of the study included preparation of a broad survey of the status of liquefaction processes under development, selection of a limited number of high potential process candidates for further study, and an analysis of the relative commercial potential of these candidates. Procedures which contributed to the achievement of the above key goals included definition of the characteristics and development status of known major liquefaction process candidates, development of standardized procedures for assessing technical, environmental, economic and product characteristics for the separate candidates, and development of procedures for selecting and comparing high potential processes. The comparisons were made for three production areas and four marketing areas of the US. In view of the broad scope of the objectives the survey was a limited effort. It used the experience gained during preparation of seven comprehensive conceptual designs/economic evaluations plus comprehensive reviews of the designs, construction and operation of several pilot plants. Results and conclusions must be viewed in the perspective of the information available, how this information was treated, and the full context of the economic comparison results. Comparative economics are presented as ratios; they are not intended to be predictors of absolute values. Because the true cost of constructing and operating large coal conversion facilities will be known only after commercialization, relative values are considered more appropriate. (LTN)

  7. National Aeronautics and Space Administration (NASA) Environmental Control and Life Support (ECLS) Capability Roadmap Development for Exploration

    Science.gov (United States)

    Bagdigian, Robert M.; Carrasquillo, Robyn L.; Metcalf, Jordan; Peterson, Laurie

    2012-01-01

    NASA is considering a number of future human space exploration mission concepts. Although detailed requirements and vehicle architectures remain mostly undefined, near-term technology investment decisions need to be guided by the anticipated capabilities needed to enable or enhance the mission concepts. This paper describes a roadmap that NASA has formulated to guide the development of Environmental Control and Life Support Systems (ECLSS) capabilities required to enhance the long-term operation of the International Space Station (ISS) and enable beyond-Low Earth Orbit (LEO) human exploration missions. Three generic mission types were defined to serve as a basis for developing a prioritized list of needed capabilities and technologies. Those are 1) a short duration micro gravity mission; 2) a long duration transit microgravity mission; and 3) a long duration surface exploration mission. To organize the effort, ECLSS was categorized into three major functional groups (atmosphere, water, and solid waste management) with each broken down into sub-functions. The ability of existing, flight-proven state-of-the-art (SOA) technologies to meet the functional needs of each of the three mission types was then assessed. When SOA capabilities fell short of meeting the needs, those "gaps" were prioritized in terms of whether or not the corresponding capabilities enable or enhance each of the mission types. The resulting list of enabling and enhancing capability gaps can be used to guide future ECLSS development. A strategy to fulfill those needs over time was then developed in the form of a roadmap. Through execution of this roadmap, the hardware and technologies needed to enable and enhance exploration may be developed in a manner that synergistically benefits the ISS operational capability, supports Multi-Purpose Crew Vehicle (MPCV) development, and sustains long-term technology investments for longer duration missions. This paper summarizes NASA s ECLSS capability roadmap

  8. Establishment of Health Technology Assessment in Iran

    Directory of Open Access Journals (Sweden)

    Shila Doaee

    2012-06-01

    Full Text Available Objective: Health Technology Assessment (HTA aims at informing healthcare policymakers, managers and practitioners of the "clinical consequences, but also the economic, ethical, and other social implications of the diffusion and use of a specific procedure or technique on medical practice". So considering the policy-oriented nature of HTA that calls for a close integration into the functioning and governance of health systems the present study focuses on executive processes and function of the HTA office of Iran.Materials and methods: Data of this review study were collected through documented sources and observations from 2007 to 2010.Results: Health Technology Assessment began its activities as a secretariat in the Deputy of Health in 2007 and it continues as a Health Technology Assessment Office at the Management of Health Technology Assessment, Standardization, and Tariff at the Deputy of curative affairs of MOHME in the beginning of 2010.14 Technology of modern medical equipment and 8 pharmaceutical medicine are assessed, Now many of measures for HTA establishment  such as cooperation National Institute of Health Research (NIHR, Holding scientific committee meetings, Establishing  the  Master's degree of  health technology assessment ,Building capacities for health technology assessment through education in major universities of the country.Conclusion: pay attention to health technology assessment, selection and application of proper technologies in the frameworks of policy-making and managerial strategies and make efforts to develop it with the support of the governmental in Iran is necessary.

  9. Technology assessment of in situ uranium mining

    International Nuclear Information System (INIS)

    Cowan, C.E.

    1981-01-01

    The objective of the PNL portion of the Technology Assessment project is to provide a description of the current in situ uranium mining technology; to evaluate, based on available data, the environmental impacts and, in a limited fashion, the health effects; and to explore the impediments to development and deployment of the in situ uranium mining technology

  10. Identifying and Assessing Life-Cycle-Related Critical Technology Elements (CTEs) for Technology Readiness Assessments (TRAs)

    National Research Council Canada - National Science Library

    Mandelbaum, Jay

    2006-01-01

    .... Because these technologies are not emphasized in the current Technology Readiness Assessment (TRA) process this document is intended to improve the focus on life-cycle-related technologies in TRAs...

  11. Technology assessment of thermal treatment technologies using ORWARE

    International Nuclear Information System (INIS)

    Assefa, G.; Eriksson, O.; Frostell, B.

    2005-01-01

    A technology assessment of thermal treatment technologies for wastes was performed in the form of scenarios of chains of technologies. The Swedish assessment tool, ORWARE, was used for the assessment. The scenarios of chains of thermal technologies assessed were gasification with catalytic combustion, gasification with flame combustion, incineration and landfilling. The landfilling scenario was used as a reference for comparison. The technologies were assessed from ecological and economic points of view. The results are presented in terms of global warming potential, acidification potential, eutrophication potential, consumption of primary energy carriers and welfare costs. From the simulations, gasification followed by catalytic combustion with energy recovery in a combined cycle appeared to be the most competitive technology from an ecological point of view. On the other hand, this alternative was more expensive than incineration. A sensitivity analysis was done regarding electricity prices to show which technology wins at what value of the unit price of electricity (SEK/kW h). Within this study, it was possible to make a comparison both between a combined cycle and a Rankine cycle (a system pair) and at the same time between flame combustion and catalytic combustion (a technology pair). To use gasification just as a treatment technology is not more appealing than incineration, but the possibility of combining gasification with a combined cycle is attractive in terms of electricity production. This research was done in connection with an empirical R and D work on both gasification of waste and catalytic combustion of the gasified waste at the Division of Chemical Technology, Royal Institute of Technology (KTH), Sweden

  12. Uranium Mill Tailings Remedial Action fiscal year 1992 roadmap

    International Nuclear Information System (INIS)

    1993-02-01

    The Uranium Mill Tailings Remedial Action (UMTRA) Project is funded and managed as two separate projects: Surface remediation (UMTRA-S) and Groundwater compliance (UMTRA-G). Surface remediation is a Major System Acquisition and has been completed at 10 sites, 7 sites are under construction, and 7 sites are in the planning stage. The planning stages of the UMTRA-G Project, a major project, began in April 1991. A programmatic environmental impact statement (PEIS) has been started. Site characterization work and baseline risk assessment will begin FY 1993. Thus, the UMTRA-S Project is a mature and ongoing program with the roles of various organizations well defined, while the UMTRA-G Project is still being formulated and the interfaces between the DOE, states and tribes, and the EPA are being established. The Office of Environmental Restoration and Waste Management (EM) directed that all projects under its authority develop roadmaps for their activities. The UMTRA Project Roadmap was developed by the UMTRA Project Office with input from the TAC, RAC, the GJPO, and assistance from SAIC. A single roadmap has been prepared for both the UMTRA-S and UMTRA-G Projects. This was deemed appropriate due to the close relationship between the projects and to the fact that the same Government and contractor personnel are preparing the roadmaps. Roadmap development is a planning process that focuses on issue identification, root-cause analysis, and issues resolution. The methodology is divided into three phases: assessment, analysis, and issues resolution

  13. A strategic surety roadmap for high consequence software

    Energy Technology Data Exchange (ETDEWEB)

    Pollock, G.M.; Dalton, L.J.

    1995-12-31

    A strategic surety roadmap for high consequence software systems developed under the High Integrity Software (HIS) Program at Sandia National Laboratories is presented. Selected research tracks are identified and described detailing current technology and outlining advancements to be pursued over the coming decade to reach HIS goals.

  14. ASSESSMENT OF QUALITY OF INNOVATIVE TECHNOLOGIES

    OpenAIRE

    Larisa Alexejevna Ismagilova; Nadegda Aleksandrovna Sukhova

    2016-01-01

    We consider the topical issue of implementation of innovative technologies in the aircraft engine building industry. In this industry, products with high reliability requirements are developed and mass-produced. These products combine the latest achievements of science and technology. To make a decision on implementation of innovative technologies, a comprehensive assessment is carried out. It affects the efficiency of the innovations realization. In connection with this, the assessment of qu...

  15. Life Cycle Assessment of Slurry Management Technologies

    DEFF Research Database (Denmark)

    Wesnæs, Marianne; Wenzel, Henrik; Petersen, Bjørn Molt

    This report contains the results of Life Cycle Assessments of two slurry management technologies - acidification and decentred incineration. The LCA foundation can be used by the contributing companies for evaluating the environmental sustainability of a specific technology from a holistic Life...... Cycle perspective. Through this the companies can evaluate the environmental benefits and disadvantages of introducing a specific technology for slurry management. From a societal perspective the results can contribute to a clarification of which slurry management technologies (or combination...

  16. Industrial wind. Strategic Road-map

    International Nuclear Information System (INIS)

    Therond, Pierre-Guy; Le Tirant, Alain; Vergnet, Marc; Hita-Perona, Sebastien; Bonnefond, Thierry; Guignard, Jean-Philippe; Roudil, Jean-Philippe; Villageois, Jean-Remy; Meyronneinc, Jean-Paul; Hua, Xavier; Herlaut, Fabienne; Maurel, Olivier; Boulnois, Renald; Lapeyre, Dominique; Mairet, Franck; Bongrain, Marie-Pierre; Kariniotakis, Georges; Rapin, Marc

    2012-06-01

    Since 2010, the ADEME has been managing four programmes within the scope of 'Future Investments'. Groups of research experts from various industrial fields, research bodies and research programming and financing agencies are responsible, within the scope of collective works, for producing strategic road-maps. These are used to launch Calls for Expressions of Interest (CEI). With regard to wind energy, the purpose of this road-map is to: - Highlight the industrial, technological, environmental and societal challenges encountered in the development of 'Industrial Wind'; - Draw up middle and long-term coherent, shared visions of the socio-technical systems or technologies in question; - Identify the technological, organisational, environmental and socio-economic obstacles, and therefore initiate (or pursue) the development of high-performance and economically viable technologies; - Promote the research, development and demonstration requirements ('technological demonstrators' to validate innovative technological solutions), experimentation requirements and technology platforms to be deployed ('pilot' projects to be tested under real circumstances: 'pre-commercial' unit prototypes then 'pre-commercial pilot farms') to improve the competitiveness of offers and companies within this sector, to reach the ambitious objectives set within the framework of the Grenelle Environnement and to promote and support the development of a French wind energy industry. These needs can then act as a basis for: - drawing up CEIs; - programming research within the ADEME and other institutions such as the Agence nationale de la recherche (ANR - French National Research Agency), the Comite strategique national sur la recherche energie (French national strategic committee for energy research) and the Alliance nationale de coordination de la recherche pour l'energie (ANCRE - French national alliance for the coordination of energy

  17. Roadmap on neurophotonics

    Science.gov (United States)

    Cho, Yong Ku; Zheng, Guoan; Augustine, George J; Hochbaum, Daniel; Cohen, Adam; Knöpfel, Thomas; Pisanello, Ferruccio; Pavone, Francesco S; Vellekoop, Ivo M; Booth, Martin J; Hu, Song; Zhu, Jiang; Chen, Zhongping; Hoshi, Yoko

    2017-01-01

    Mechanistic understanding of how the brain gives rise to complex behavioral and cognitive functions is one of science’s grand challenges. The technical challenges that we face as we attempt to gain a systems-level understanding of the brain are manifold. The brain’s structural complexity requires us to push the limit of imaging resolution and depth, while being able to cover large areas, resulting in enormous data acquisition and processing needs. Furthermore, it is necessary to detect functional activities and ‘map’ them onto the structural features. The functional activity occurs at multiple levels, using electrical and chemical signals. Certain electrical signals are only decipherable with sub-millisecond timescale resolution, while other modes of signals occur in minutes to hours. For these reasons, there is a wide consensus that new tools are necessary to undertake this daunting task. Optical techniques, due to their versatile and scalable nature, have great potentials to answer these challenges. Optical microscopy can now image beyond the diffraction limit, record multiple types of brain activity, and trace structural features across large areas of tissue. Genetically encoded molecular tools opened doors to controlling and detecting neural activity using light in specific cell types within the intact brain. Novel sample preparation methods that reduce light scattering have been developed, allowing whole brain imaging in rodent models. Adaptive optical methods have the potential to resolve images from deep brain regions. In this roadmap article, we showcase a few major advances in this area, survey the current challenges, and identify potential future needs that may be used as a guideline for the next steps to be taken. PMID:28386392

  18. National Aeronautics and Space Administration (NASA) Environmental Control and Life Support (ECLS) Integrated Roadmap Development

    Science.gov (United States)

    Metcalf, Jordan; Peterson, Laurie; Carrasquillo, Robyn; Bagdigian, Robert

    2012-01-01

    Although NASA is currently considering a number of future human space exploration mission concepts, detailed mission requirements and vehicle architectures remain mostly undefined, making technology investment strategies difficult to develop and sustain without a top-level roadmap to serve as a guide. This paper documents the process and results of an effort to define a roadmap for Environmental Control and Life Support Systems (ECLSS) capabilities required to enhance the long-term operation of the International Space Station (ISS) as well as enable beyond-Low Earth Orbit (LEO) human exploration missions. Three generic mission types were defined to serve as a basis for developing a prioritized list of needed capabilities and technologies. Those are 1) a short duration micro-gravity mission; 2) a long duration microgravity mission; and 3) a long duration partial gravity (surface) exploration mission. To organize the effort, a functional decomposition of ECLSS was completed starting with the three primary functions: atmosphere, water, and solid waste management. Each was further decomposed into sub-functions to the point that current state-of-the-art (SOA) technologies could be tied to the sub-function. Each technology was then assessed by NASA subject matter experts as to its ability to meet the functional needs of each of the three mission types. When SOA capabilities were deemed to fall short of meeting the needs of one or more mission types, those gaps were prioritized in terms of whether or not the corresponding capabilities enable or enhance each of the mission types. The result was a list of enabling and enhancing capability needs that can be used to guide future ECLSS development, as well as a list of existing hardware that is ready to go for exploration-class missions. A strategy to fulfill those needs over time was then developed in the form of a roadmap. Through execution of this roadmap, the hardware and technologies intended to meet exploration needs

  19. The Soils and Groundwater – EM-20 S&T Roadmap Quality Assurance Project Plan

    Energy Technology Data Exchange (ETDEWEB)

    Fix, N. J.

    2008-02-11

    The Soils and Groundwater – EM-20 Science and Technology Roadmap Project is a U.S. Department of Energy, Office of Environmental Management-funded initiative designed to develop new methods, strategies and technology for characterizing, modeling, remediating, and monitoring soils and groundwater contaminated with metals, radionuclides, and chlorinated organics. This Quality Assurance Project Plan provides the quality assurance requirements and processes that will be followed by EM-20 Roadmap Project staff.

  20. Solar-electric power: The U.S. photovoltaic industry roadmap

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2003-01-01

    To meet this challenge, we — the U.S.-based PV industry — have developed this roadmap as a guide for building our domestic industry, ensuring U.S. technology ownership, and implementing a sound commercialization strategy that will yield significant benefits at minimal cost. Putting the roadmap into action will call for reasonable and consistent co-investment by our industry and government in research and technology development.

  1. Biogas Opportunities Roadmap Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2015-12-01

    In support of the Obama Administration's Climate Action Plan, the U.S. Department of Energy, the U.S. Environmental Protection Agency, and U.S. Department of Agriculture jointly released the Biogas Opportunities Roadmap Progress Report, updating the federal government's progress to reduce methane emissions through biogas systems since the Biogas Opportunities Roadmap was completed by the three agencies in July 2014. The report highlights actions taken, outlines challenges and opportunities, and identifies next steps to the growth of a robust biogas industry.

  2. Assessing Space Exploration Technology Requirements as a First Step Towards Ensuring Technology Readiness for International Cooperation in Space Exploration

    Science.gov (United States)

    Laurini, Kathleen C.; Hufenbach, Bernhard; Satoh, Maoki; Piedboeuf, Jean-Claude; Neumann, Benjamin

    2010-01-01

    technologies needed for Mars mission. Agencies see the importance of assessing gaps and overlaps in their plans to advance technologies in order to leverage their investments and enable exciting missions as soon as practical. They see the importance of respecting the ability of any agency to invest in any technologies considered interesting or strategic. This paper will describe the importance of developing an appropriate international strategy for technology development and ideas for effective mechanisms for advancing an international strategy. This work will both inform and be informed by the development of an ISECG Global Exploration Roadmap and serve as a concrete step forward in advancing the Global Exploration Strategy.

  3. Small Wind Turbine Technology Assessment

    International Nuclear Information System (INIS)

    Avia Aranda, F.; Cruz Cruz, I.

    1999-01-01

    The result of the study carried out under the scope of the ATYCA project Test Plant of Wind Systems for Isolated Applications, about the state of art of the small wind turbine technology (wind turbines with swept area smaller than 40 m 2 ) is presented. The study analyzes the collected information on 60 models of wind turbines from 23 manufacturers in the worldwide market. Data from Chinese manufacturers, that have a large participation in the total number of small wind turbines in operation, are not included, due to the unavailability of the technical information. (Author) 15 refs

  4. Health technology assessment in oral health.

    Science.gov (United States)

    Esfandiari, Shahrokh; Feine, Jocelyne

    2011-01-01

    Health-care costs are rising at an alarmingly fast rate worldwide, particularly in developed countries such as the United States. This is predominantly a result of the development of new, high-cost health technologies intended for improved diagnosis and treatment. The purpose of health technology assessment is to systematically determine the true benefits of new technologies, taking into account clinical efficacy/effectiveness and cost as well as societal preference and ethical issues. In this report, the purpose of health technology assessment is explained in light of new developments in oral health technology, particularly intraoral implants. This information is intended to educate and to challenge oral health opinion leaders to consider all of the issues involved in the development and diffusion of new oral health technologies.

  5. Concentrating Solar Power Gen3 Demonstration Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Mehos, Mark [National Renewable Energy Lab. (NREL), Golden, CO (United States); Turchi, Craig [National Renewable Energy Lab. (NREL), Golden, CO (United States); Vidal, Judith [National Renewable Energy Lab. (NREL), Golden, CO (United States); Wagner, Michael [National Renewable Energy Lab. (NREL), Golden, CO (United States); Ma, Zhiwen [National Renewable Energy Lab. (NREL), Golden, CO (United States); Ho, Clifford [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Kolb, William [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Andraka, Charles [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Kruizenga, Alan [Sandia National Lab. (SNL-CA), Livermore, CA (United States)

    2017-01-01

    Today's power-tower concentrating solar power (CSP) technology exists in large part as a result of Department of Energy (DOE) and utility industry funding of demonstration systems in the 1980s and 1990s. Today's most advanced towers are integrated with molten-salt thermal energy storage, delivering thermal energy at 565 degrees C for integration with conventional steam-Rankine cycles. The supercritical carbon dioxide power cycle has been identified as a likely successor to the steam-Rankine power cycle due to its potential for high efficiency when operating at elevated temperatures of 700 degrees C or greater. Over the course of the SunShot Initiative, DOE has supported a number of technology pathways that can operate efficiently at these temperatures and that hold promise to be reliable and cost effective. Three pathways - molten salt, particle, and gaseous - were selected for further investigation based on a two-day workshop held in August of 2016. The information contained in this roadmap identifies research and development challenges and lays out recommended research activities for each of the three pathways. DOE foresees that by successfully addressing the challenges identified in this roadmap, one or more technology pathways will be positioned for demonstration and subsequent commercialization within the next ten years. Based on current knowledge of the three power tower technologies, all three have the potential to achieve the SunShot goal of 6 cents/kilowatt-hour. Further development, modeling, and testing are now required to bring one or more of the technologies to a stage where integrated system tests and pilot demonstrations are feasible.

  6. The European Roadmap to Fussion Electricity

    International Nuclear Information System (INIS)

    Romanelli, Francesco

    2014-01-01

    With the reduction of CO 2 emissions driving future energy policy, fusion can start market penetration around 2050 with up to 30% of electricity production by 2100. This requires an ambitious, yet realistic roadmap towards the demonstration of electricity production by 2050. This talk describes the main technical challenges on the path to fusion energy. For all of the challenges candidate solutions have been developed and the goal of the programme is now to demonstrate that they will also work at the scale of a reactor. The roadmap has been developed within a goal-oriented approach articulated in eight different Missions. For each Mission the critical aspects for reactor application, the risks and risk mitigation stretegies, the level of readiness now and after ITER and the gaps in the programme have been examined with involvement of experts from ITER International Organization, Fusion for Energy, EFDA Close Support Unites and EFDA Associates. High-level work packages for the roadmap implementation have been prepared and the resources evaluated. ITER is the key facility in the roadmap and its success represents the most important overarching objectives of the EU programme. A demonstration fusion power plant (DEMO), producing net electricitiy for the grid at the level of a few hundreds MW is foreseen to start operation in the early 2040s. Following ITER, it will be the single step to a commercial fusion power plant. Industry must be involved early in the DEMO definition and design. The evolution of the programme requires that industry progressively shifts its role from that of provider of high-tech components to that of driver of the fusion development. Industry must be able to take full responsibility for the commercial fusion power plan after successful DEMO operation. For this reason, DEMO cannot be defined and designed by research laboratories alone, but requires the full involvement of industry in all technological and systems aspects of the design. Europe

  7. Assessing medical technologies in development; a new paradigm of medical technology assessment

    NARCIS (Netherlands)

    Hummel, J. Marjan; van Rossum, Wouter; Verkerke, Gijsbertus Jacob; Rakhorst, Gerhard

    2000-01-01

    Objective: Our study aims to provide a practical contribution to the field of medical technology assessment within a new paradigm. This paradigm indicates the need for more comprehensive technology assessments in the development stage of a new technology. - Method: We introduce a method, based on

  8. Assessing medical technologies in development - A new paradigm of medical technology assessment

    NARCIS (Netherlands)

    Hummel, MJM; van Rossum, W; Verkerke, GJ; Rakhorst, G

    2000-01-01

    Objective: Our study aims to provide a practical contribution to the field of medical technology assessment within a new paradigm. This paradigm indicates the need for more comprehensive technology assessments in the development stage of a new technology. Method: We introduce a method, based on

  9. Health technology assessment. Evaluation of biomedical innovative technologies.

    Science.gov (United States)

    Turchetti, Giuseppe; Spadoni, Enza; Geisler, Eliezer Elie

    2010-01-01

    This article describes health technology assessment (HTA) as an evaluation tool that applies systematic methods of inquiry to the generation and use of health technologies and new products. The focus of this article is on the contributions of HTA to the management of the new product development effort in the biomedical organization. Critical success factors (CSFs) are listed, and their role in assessing success is defined and explained. One of the conclusions of this article is that HTA is a powerful tool for managers in the biomedical sector, allowing them to better manage their innovation effort in their continuing struggle for competitiveness and survival.

  10. Oak Ridge National Laboratory Technology Logic Diagram. Volume 1, Technology Evaluation: Part A, Decontamination and Decommissioning

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Strategic Roadmap for the Oak Ridge Reservation is a generalized planning document that identifies broad categories of issues that keep ORNL outside full compliance with the law and other legally binding agreements. Possible generic paths to compliance, issues, and the schedule for resolution of the issues one identified. The role of the Oak Ridge National Laboratory Technology Logic Diagram (TLD) is then to identify specific site issues (problems), identify specific technologies that can be brought to bear on the issues, and assess the current status and readiness of these remediation technologies within the constraints of the schedule commitment. Regulatory requirements and commitments contained in the Strategic Roadmap for the Oak Ridge Reservation are also included in the TLD as constraints to the application of immature technological solutions. Some otherwise attractive technological solutions may not be employed because they may not be deployable on the schedule enumerated in the regulatory agreements. The roadmap for ORNL includes a list of 46 comprehensive logic diagrams for WM of low-level, radioactive-mixed, hazardous, sanitary and industrial. and TRU waste. The roadmapping process gives comparisons of the installation as it exists to the way the installation should exist under full compliance. The identification of the issues is the goal of roadmapping. This allows accurate and timely formulation of activities.

  11. The NASA Electronic Parts and Packaging (NEPP) Program: Roadmap for FY15 and Beyond and Recent Radiation Highlights

    Science.gov (United States)

    LaBel, Kenneth A.; Sampson, Michael J.

    2015-01-01

    This presentation is a NASA Electronic Parts and Packaging (NEPP) Program: Roadmap for FY15 and Beyond. This roadmap provides a snapshot for current plans and collaborations on testing and evaluation of electronics as well as a discussion of the technology selection approach.

  12. Built-Environment Wind Turbine Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Smith, J.; Forsyth, T.; Sinclair, K.; Oteri, F.

    2012-11-01

    Although only a small contributor to total electricity production needs, built-environment wind turbines (BWTs) nonetheless have the potential to influence the public's consideration of renewable energy, and wind energy in particular. Higher population concentrations in urban environments offer greater opportunities for project visibility and an opportunity to acquaint large numbers of people to the advantages of wind projects on a larger scale. However, turbine failures will be equally visible and could have a negative effect on public perception of wind technology. This roadmap provides a framework for achieving the vision set forth by the attendees of the Built-Environment Wind Turbine Workshop on August 11 - 12, 2010, at the U.S. Department of Energy's National Renewable Energy Laboratory. The BWT roadmap outlines the stakeholder actions that could be taken to overcome the barriers identified. The actions are categorized as near-term (0 - 3 years), medium-term (4 - 7 years), and both near- and medium-term (requiring immediate to medium-term effort). To accomplish these actions, a strategic approach was developed that identifies two focus areas: understanding the built-environment wind resource and developing testing and design standards. The authors summarize the expertise and resources required in these areas.

  13. NASA Net Zero Energy Buildings Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Pless, S.; Scheib, J.; Torcellini, P.; Hendron, B.; Slovensky, M.

    2014-10-01

    In preparation for the time-phased net zero energy requirement for new federal buildings starting in 2020, set forth in Executive Order 13514, NASA requested that the National Renewable Energy Laboratory (NREL) to develop a roadmap for NASA's compliance. NASA detailed a Statement of Work that requested information on strategic, organizational, and tactical aspects of net zero energy buildings. In response, this document presents a high-level approach to net zero energy planning, design, construction, and operations, based on NREL's first-hand experience procuring net zero energy construction, and based on NREL and other industry research on net zero energy feasibility. The strategic approach to net zero energy starts with an interpretation of the executive order language relating to net zero energy. Specifically, this roadmap defines a net zero energy acquisition process as one that sets an aggressive energy use intensity goal for the building in project planning, meets the reduced demand goal through energy efficiency strategies and technologies, then adds renewable energy in a prioritized manner, using building-associated, emission- free sources first, to offset the annual energy use required at the building; the net zero energy process extends through the life of the building, requiring a balance of energy use and production in each calendar year.

  14. The social function of technology assessment

    Science.gov (United States)

    Huddle, F. P.

    1972-01-01

    The problem of preserving the uneasy balance between a dynamic society and the equilibrium of man-environment society is discussed. Four sets of activities involved in technology assessment are considered: (1) Technology forecasting is necessary to warn of future dangers and opportunities, for effective timing, and to identify tradeoffs and alternatives. But forecasting is also chancy at best. (2) Social indicators need to be developed for the characterization of social status and measurement of social progress, as well as a better understanding of social needs. (3) With respect to technology assessment, the conflict between profitable directions of innovations and socially desirable directions is described, and a systematic way is needed to determine in advance what is technologically feasible to meet social needs. (4) National goals with respect to scientific and technological developments are also required.

  15. Evaluation of Roadmap to Achieve Energy Delivery Systems Cybersecurity

    Energy Technology Data Exchange (ETDEWEB)

    Chavez, Adrian R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-10-01

    The Department of Energy/Office of Electricity Delivery and Energy Reliability (DOE/OE) Cybersecurity for Energy Delivery Systems (CEDS) program is currently evaluating the Roadmap to Achieve Energy Delivery Systems Cybersecurity document that sets a vision and outlines a set of milestones. The milestones are divided into five strategic focus areas that include: 1. Build a Culture of Security; 2. Assess and Monitor Risk; 3. Develop and Implement New Protective Measures to Reduce Risk; 4. Manage Incidents; and 5. Sustain Security Improvements. The most current version of the roadmap was last updated in September of 2016. Sandia National Laboratories (SNL) has been tasked with revisiting the roadmap to update the current state of energy delivery systems cybersecurity protections. SNL is currently working with previous and current partners to provide feedback on which of the roadmap milestones have been met and to identify any preexisting or new gaps that are not addressed by the roadmap. The specific focus areas SNL was asked to evaluate are: 1. Develop and Implement New Protective Measures to Reduce Risk and 2. Sustain Security Improvements. SNL has formed an Industry Advisory Board (IAB) to assist in answering these questions. The IAB consists of previous partners on past CEDS funded efforts as well as new collaborators that have unique insights into the current state of cybersecurity within energy delivery systems. The IAB includes asset owners, utilities and vendors of control systems. SNL will continue to maintain regular communications with the IAB to provide various perspectives on potential future updates to further improve the breadth of cybersecurity coverage of the roadmap.

  16. An environmental assessment system for environmental technologies

    DEFF Research Database (Denmark)

    Clavreul, Julie; Baumeister, Hubert; Christensen, Thomas Højlund

    2014-01-01

    A new model for the environmental assessment of environmental technologies, EASETECH, has been developed. The primary aim of EASETECH is to perform life-cycle assessment (LCA) of complex systems handling heterogeneous material flows. The objectives of this paper are to describe the EASETECH...

  17. Social Shaping in Danish Technology Assessment

    DEFF Research Database (Denmark)

    Hansen, Anne Grethe; Clausen, Christian

    2003-01-01

    The term ‘social shaping of technology’ has been used broadly as a response to techno-economic deterministic understandings of the relations between technology and society. Social shaping has brought together analysts from different backgrounds who share a common interest in the role of social an...... in these projects contributed to new insights into the processes of technological change and thus to policy formulation. The social shaping perspective and technology assessment experiences are suggested as important guides to future technology strategies....... and political action for technology change. The authors of this article suggest that the social shaping perspective draws on lessons from technology assessments of earlier decades, lessons about the role of technology debate, participation and democratic control. We suggest that these are important......The term ‘social shaping of technology’ has been used broadly as a response to techno-economic deterministic understandings of the relations between technology and society. Social shaping has brought together analysts from different backgrounds who share a common interest in the role of social...

  18. The Past and the Future of Constructive Technology Assessment

    NARCIS (Netherlands)

    Schot, Johan; Rip, Arie

    1997-01-01

    Constructive technology assessment (CTA) is a member of the family of technology assessment approaches. developed in particular in the Netherlands and Denmark. CTA shifts the focus away from assessing impacts of new technologies to broadening design, development, and implementation processes.

  19. Technology assessment and social science research on technology

    International Nuclear Information System (INIS)

    Thienen, V. von

    1983-01-01

    In a first step this bibliography wants to overcome the want of systematic scientific data compilations and evaluations of experiences in studies on technology assessment. It concentrates on the social and political aspects of the development of technologies and the decision on their utilization by presenting titles which have been published in English- and German-speaking countries in the past decade. The bibliography is divided into various chapters and subchapters. The index part contains authors' indexes and publishers' indexes, subject indexes, other bibliographies and selected periodicals. (orig.) With 1647 refs [de

  20. Independent Assessment of Technology Characterizations to Support the Biomass Program Annual State-of-Technology Assessments

    Energy Technology Data Exchange (ETDEWEB)

    Yeh, B.

    2011-03-01

    This report discusses an investigation that addressed two thermochemical conversion pathways for the production of liquid fuels and addressed the steps to the process, the technology providers, a method for determining the state of technology and a tool to continuously assess the state of technology. This report summarizes the findings of the investigation as well as recommendations for improvements for future studies.

  1. Roadmap to the SRS computing architecture

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, A.

    1994-07-05

    This document outlines the major steps that must be taken by the Savannah River Site (SRS) to migrate the SRS information technology (IT) environment to the new architecture described in the Savannah River Site Computing Architecture. This document proposes an IT environment that is {open_quotes}...standards-based, data-driven, and workstation-oriented, with larger systems being utilized for the delivery of needed information to users in a client-server relationship.{close_quotes} Achieving this vision will require many substantial changes in the computing applications, systems, and supporting infrastructure at the site. This document consists of a set of roadmaps which provide explanations of the necessary changes for IT at the site and describes the milestones that must be completed to finish the migration.

  2. Infrastructures for systems medicine in Iran’s health roadmap

    Directory of Open Access Journals (Sweden)

    Iraj Nabipour

    2014-11-01

    Full Text Available Background: Systems medicine denotes a paradigm shift in medicine that arising from fundamental thoughts in systems biology. Systems medicine looks at health and disease using systems approaches. Systems or holistic approaches to studying the complexities of disease, emerging measurement and visualization molecular technologies to exploring of patient data space, and new computational and mathematical tools are fundamentals for this revolution in medicine. Methods: In order to explore the scientific/technological key objectives for systems medicine in “Iran’s Scientific Map in the Health Sector”, the details of goals, policies and requisites of Iran’s Health Roadmap were compared with horizontal and vertical policies of “National Institutes of Health (NIH Roadmap for Medical Research in U.S.A”. Results: A great attention has been paid on information technology, networking, interdisciplinary approach, innovation and high- risk research in Iran’s Health Roadmap. However, areas of research such as biological pathways (including metabolomics and networks structural biology molecular libraries and imaging bioinformatics and computational biology and human genome have not been adequately addressed. Conclusion: In order to react to waves of systems medicine, as a megatrend in health, Iran’s Scientific Map in the Health Sector should be synthesized to paradigm shift of emerging technologies in biomedicine. A framework for a broad interdisciplinary approach in biomedical research should be addressed to change medicine from reactive to proactive.

  3. Biomass Gasification Technology Assessment: Consolidated Report

    Energy Technology Data Exchange (ETDEWEB)

    Worley, M.; Yale, J.

    2012-11-01

    Harris Group Inc. (HGI) was commissioned by the National Renewable Energy Laboratory to assess gasification and tar reforming technologies. Specifically, the assessments focused on gasification and tar reforming technologies that are capable of producing a syngas suitable for further treatment and conversion to liquid fuels. HGI gathered sufficient information to analyze three gasification and tar reforming systems. This report summarizes the equipment, general arrangement of the equipment, operating characteristics, and operating severity for each technology. The order of magnitude capital cost estimates are supported by a basis-of-estimate write-up, which is also included in this report. The report also includes Microsoft Excel workbook models, which can be used to design and price the systems. The models can be used to analyze various operating capacities and pressures. Each model produces a material balance, equipment list, capital cost estimate, equipment drawings and preliminary general arrangement drawings. Example outputs of each model are included in the Appendices.

  4. VERAM - Vision and Roadmap for European Raw Materials

    Science.gov (United States)

    Baumgarten, Wibke; Vashev, Boris

    2017-04-01

    The overall objective of VERAM project is to produce a Vision and Roadmap for European Raw Materials in 2050 based on raw materials research and innovation (R&I) coordination. Two leading European Technology Platforms (ETPs): ETP SMR (Sustainable Minerals Resources) and FTP (Forest Technology Platform) are joining forces to develop a common vison and roadmap with the support of ECTP (European Construction Technology Platform), represented by UNIVPM, SusChem (ETP for Sustainable Chemistry), represented by Cefic, EuMaT (Advanced Materials ETP), represented by VITO, ERAMIN 2, represented by Research Centre JUELICH and WoodWisdom Network Plus represented by the Agency for Renewable Resources (FNR). This partnership provides VERAM with expertise from downstream applications and additional knowledge on non-biotic and biotic raw materials. The project encourages capacity building as well as transfer of knowledge. It expects to provide an innovation reference point for the European Institute of Innovation & Technology (EIT) Raw Materials (formerly the KIC Raw MatTERS), to coordinate the network involved in the European Innovation Partnership (EIP) on Raw Materials Commitments and relevant proposals funded under Horizon 2020. It provides a platform for identifying gaps and complementarities and enables their bridging. VERAM will be able to advise the European Commission and Member States on future research needs and policies to stimulate innovation and assist in overcoming fragmentation in the implementing the EIP Raw Materials Strategic Implementation Plan. VERAM looks for mutually beneficial information exchange, encourages cross-fertilization between actions undertaken by different raw material industries, and expects to accelerate exploitation of breakthrough innovations. One of the main outcomes of the project is the presentation of a common long term 2050 Vision and Roadmap for relevant raw materials including metals, industrial minerals and aggregates and wood. The

  5. Expanding the applicability of Heallth Technology Assessments

    DEFF Research Database (Denmark)

    Draborg, Eva; Hansen, Helle Ploug

    2012-01-01

    The objective of the presentation is to expand the foundations of input into policy decision making relying on health technology assessments (HTA). HTAs are primarily based on systematic reviews (SR) and thereby mostly on randomized controlled trials (RCT). RCTs can be distinguished on a continuu...

  6. Assessment of technology generating institutions in biotechnology ...

    African Journals Online (AJOL)

    Assessment of technology generating institutions in biotechnology innovation system of South-Eastern Nigeria. ... Results of the study revealed that some of the institutions have been involved in biotechnology research for the past two decades but have only significantly invested on bio-processing (58.8%) and cell and ...

  7. Technology and assessment of neutron absorbing materials

    International Nuclear Information System (INIS)

    Kelly, B.T.; Murgatroyd, R.A.

    1977-06-01

    The present review assesses more recent developments in the technology and application of those absorber materials which are considered to be established or to have shown potential in reactor control. Emphasis is placed on physical, chemical and metallurgical properties and upon irradiation behaviour. (author)

  8. Assessment of Sensor Technologies for Advanced Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Korsah, Kofi [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Ramuhalli, Pradeep [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Vlim, R. [Argonne National Lab. (ANL), Argonne, IL (United States); Kisner, Roger A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Britton, Jr, Charles L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Wootan, D. W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Anheier, Jr, N. C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Diaz, A. A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hirt, E. H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Chien, H. T. [Argonne National Lab. (ANL), Argonne, IL (United States); Sheen, S. [Argonne National Lab. (ANL), Argonne, IL (United States); Bakhtiari, Sasan [Argonne National Lab. (ANL), Argonne, IL (United States); Gopalsami, S. [Argonne National Lab. (ANL), Argonne, IL (United States); Heifetz, A. [Argonne National Lab. (ANL), Argonne, IL (United States); Tam, S. W. [Argonne National Lab. (ANL), Argonne, IL (United States); Park, Y. [Argonne National Lab. (ANL), Argonne, IL (United States); Upadhyaya, B. R. [Univ. of Tennessee, Knoxville, TN (United States); Stanford, A. [Univ. of Tennessee, Knoxville, TN (United States)

    2016-10-01

    Sensors and measurement technologies provide information on processes, support operations and provide indications of component health. They are therefore crucial to plant operations and to commercialization of advanced reactors (AdvRx). This report, developed by a three-laboratory team consisting of Argonne National Laboratory (ANL), Oak Ridge National Laboratory (ORNL) and Pacific Northwest National Laboratory (PNNL), provides an assessment of sensor technologies and a determination of measurement needs for AdvRx. It provides the technical basis for identifying and prioritizing research targets within the instrumentation and control (I&C) Technology Area under the Department of Energy’s (DOE’s) Advanced Reactor Technology (ART) program and contributes to the design and implementation of AdvRx concepts.

  9. The 2016 oxide electronic materials and oxide interfaces roadmap

    International Nuclear Information System (INIS)

    Lorenz, M; Grundmann, M; Ramachandra Rao, M S; Mukherjee, J; Priyadarshini, M; Venkatesan, T; Fortunato, E; Barquinha, P; Branquinho, R; Salgueiro, D; Martins, R; Carlos, E; Liu, A; Shan, F K; Boschker, H; DasGupta, N; Rogers, D J; Teherani, F H; Sandana, E V; Bove, P

    2016-01-01

    Oxide electronic materials provide a plethora of possible applications and offer ample opportunity for scientists to probe into some of the exciting and intriguing phenomena exhibited by oxide systems and oxide interfaces. In addition to the already diverse spectrum of properties, the nanoscale form of oxides provides a new dimension of hitherto unknown phenomena due to the increased surface-to-volume ratio. Oxide electronic materials are becoming increasingly important in a wide range of applications including transparent electronics, optoelectronics, magnetoelectronics, photonics, spintronics, thermoelectrics, piezoelectrics, power harvesting, hydrogen storage and environmental waste management. Synthesis and fabrication of these materials, as well as processing into particular device structures to suit a specific application is still a challenge. Further, characterization of these materials to understand the tunability of their properties and the novel properties that evolve due to their nanostructured nature is another facet of the challenge. The research related to the oxide electronic field is at an impressionable stage, and this has motivated us to contribute with a roadmap on ‘oxide electronic materials and oxide interfaces’. This roadmap envisages the potential applications of oxide materials in cutting edge technologies and focuses on the necessary advances required to implement these materials, including both conventional and novel techniques for the synthesis, characterization, processing and fabrication of nanostructured oxides and oxide-based devices. The contents of this roadmap will highlight the functional and correlated properties of oxides in bulk, nano, thin film, multilayer and heterostructure forms, as well as the theoretical considerations behind both present and future applications in many technologically important areas as pointed out by Venkatesan. The contributions in this roadmap span several thematic groups which are represented by

  10. Sustainability assessment of advanced wastewater treatment technologies

    DEFF Research Database (Denmark)

    Høibye, Linda; Clauson-Kaas, Jes; Wenzel, Henrik

    2008-01-01

    As a consequence of the EU Water Framework Directive more focus is now on discharges of hazardous substances from wastewater treatment plants and sewers. Thus, many municipalities in Denmark may have to adopt to future advanced treatment technologies. This paper describes a holistic assessment......, which includes technical, economical and environmental aspects. The technical and economical assessment is performed on 5 advanced treatment technologies: sand filtration, ozone treatment, UV exclusively for disinfection of pathogenic microorganisms, membrane bioreactor (MBR) and UV in combination...... and three advanced treatment methods; sand filtration, ozone treatment and MBR. The technical and economic assessment showed that UV solely for disinfection purposes or ozone treatment is the most advantageous advanced treatment methods if the demands are restricted to pathogenic microorganisms. In terms...

  11. Sustainability assessment of advanced wastewater treatment technologies

    DEFF Research Database (Denmark)

    Høibye, Linda; Clauson-Kaas, Jes; Wenzel, Henrik

    2007-01-01

    As a consequence of the EU Water Framwork Directive, more focus is now on discharges of hazardous substances from wastewater treatment plants and sewers. Thus, many municipalities in Denmark may have to adopt to future advenced treatment technologies. This paper describes a holistic assessment......, which includes technical, economic and environmental aspects. The technical and economic assessment is performed on 5 advanced treatment technologies: sand filtration, ozone treatment, UV exclusively for disinfection of pathogenic microorganisms, Membrane Bioreactor (MBR), and UV in combination...... and three advanced treatment methods: sand filtration, ozone treatment and MBR. The technical and economic assessment showed that UV solely for disinfection purposes or ozone treatment are the most advantageous advanved treatment methods if the demands are restricted to pathogenic microorganisms. In terms...

  12. Technology Audit: Assessment of Innovative Portfolio

    Directory of Open Access Journals (Sweden)

    Kurushina Viktoria

    2016-01-01

    Full Text Available The article discusses the features of the technological audit performing in the companies of oil and gas sector of Russian economy. To measure the innovations quality level the scale was developed based on the Theory of Inventive Problem Solving and the theory of technological structures. Figures of the innovations quantity by levels, volume and quality of the innovative portfolio are offered for assessment the innovative portfolio quality. The method was tested on an example of oil and gas transporting enterprises. The results of the comparative analysis of innovative portfolio are shown.

  13. Technology enhanced peer learning and peer assessment

    DEFF Research Database (Denmark)

    Henriksen, Christian Bugge; Bregnhøj, Henrik; Rosthøj, Susanne

    2016-01-01

    This paper explores the application of learning designs featuring formalised and structured technology enhanced peer learning. These include student produced learning elements, peer review discussions and peer assessment in the BSc/MSc level summer course Restoration of European Ecosystems...... and Freshwaters (REEF), the Master thesis preparation seminars for the Master of Public Health (MPH) and the MOOC course Global Environmental Management (GEM). The application of student produced learning elements and peer review discussions is investigated by analyzing quotes from course evaluations...... and performing focus group interviews. The application of peer assessment is investigated by analyzing the agreement of peer assessment between students assessing the same assignment. Our analyses confirm previous research on the value of peer learning and peer assessment and we argue that there could also...

  14. Heat Roadmap Europe

    DEFF Research Database (Denmark)

    Hansen, Kenneth; Connolly, David; Lund, Henrik

    2015-01-01

    The cost of heat savings in buildings increase as more heat savings are achieved due to the state of the building stock and hence, alternatives other than savings typically become more economically feasible at a certain level of heat reductions. It is important to identify when the cost of heat...... savings become more expensive than the cost of sustainable heat supply, so society does not overinvest in heat saving measures. This study first investigates the heat saving potentials for different countries in Europe, along with their associated costs, followed by a comparison with alternative ways...... of supplying sustainable heating. Different heat production options are included in terms of individual and community heating systems. Furthermore, the levelised cost of supplying sustainable heat is estimated for both a single technology and from an energy system perspective. The results are analysed...

  15. Separations and Actinide Science -- 2005 Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    2005-09-01

    The Separations and Actinide Science Roadmap presents a vision to establish a separations and actinide science research (SASR) base composed of people, facilities, and collaborations and provides new and innovative nuclear fuel cycle solutions to nuclear technology issues that preclude nuclear proliferation. This enabling science base will play a key role in ensuring that Idaho National Laboratory (INL) achieves its long-term vision of revitalizing nuclear energy by providing needed technologies to ensure our nation's energy sustainability and security. To that end, this roadmap suggests a 10-year journey to build a strong SASR technical capability with a clear mission to support nuclear technology development. If nuclear technology is to be used to satisfy the expected growth in U.S. electrical energy demand, the once-through fuel cycle currently in use should be reconsidered. Although the once-through fuel cycle is cost-effective and uranium is inexpensive, a once-through fuel cycle requires long-term disposal to protect the environment and public from long-lived radioactive species. The lack of a current disposal option (i.e., a licensed repository) has resulted in accumulation of more than 50,000 metric tons of spent nuclear fuel. The process required to transition the current once-through fuel cycle to full-recycle will require considerable time and significant technical advancement. INL's extensive expertise in aqueous separations will be used to develop advanced separations processes. Computational chemistry will be expanded to support development of future processing options. In the intermediate stage of this transition, reprocessing options will be deployed, waste forms with higher loading densities and greater stability will be developed, and transmutation of long-lived fission products will be explored. SASR will support these activities using its actinide science and aqueous separations expertise. In the final stage, full recycle will be

  16. Continuing the International Roadmapping Effort - An Introduction to the Evolution of the ISECG Global Exploration Roadmap

    Science.gov (United States)

    Schlutz, Juergen; Hufenbach, Bernhard; Laurini, Kathy; Spiero, Francois

    2016-07-01

    Future space exploration goals call for sending humans and robots beyond low Earth orbit and establishing sustained access to destinations such as the Moon, asteroids and Mars. Space agencies participating in the International Space Exploration Coordination Group (ISECG) are discussing an international approach for achieving these goals, documented in ISECG's Global Exploration Roadmap (GER). The GER reference scenario reflects a step-wise evolution of critical capabilities from ISS to missions in the lunar vicinity in preparation for the journey of humans to Mars. As ISECG agencies advance their individual planning, they also advance the mission themes and reference architecture of the GER to consolidate common goals, near-term mission scenarios and initial opportunities for collaboration. In this context, particular focus has been given to the Better understanding and further refinement of cislunar infrastructure and potential lunar transportation architecture Interaction with international science communities to identify and articulate the scientific opportunities of the near-term exploration mission themes Coordination and consolidation of interest in lunar polar volatiles prospecting and potential for in-situ resource utilisation Identification and articulation of the benefits from exploration and the technology transfer activities The paper discusses the ongoing roadmapping activity of the ISECG agencies. It provides an insight into the status of the above activities and an outlook towards the evolution of the GER that is currently foreseen in the 2017 timeframe.

  17. Information and communication technologies for operating of smart distribution grids based on the German standardization roadmap; Informations- und Kommunikationstechnologien zur Betriebsfuehrung smarter Verteilungsnetze auf Basis der Deutschen Normungsroadmap

    Energy Technology Data Exchange (ETDEWEB)

    Brunner, Christoph [IT4Power, Zug (Switzerland); Buchholz, Bernd Michael [NTB Technoservice, Pyrbaum (Germany); Hampel, Herman [iAD GmbH, Grosshabersdorf (Germany); Naumann, A. [Magdeburg Univ. (Germany)

    2012-07-01

    The current challenges of the distribution networks are caused by a growing volume of distributed energy in-feed and new types of load. They require the introduction of information and communication technologies (ICT) down to the low voltage level. Innovative monitoring and control tasks are developed in the framework of the European lighthouse project ''Web2Energy'' (W2E) and performed in the practice of the 20/0.4 kV network of the HSE AG in Darmstadt. The overview of the realized functions is given and the related information exchange between the control centre and the distributed plants is considered. The project applies the standards IEC 61850 for data communication and IEC 61968/70 for the data management (CIM - Common Information Model) in the control center (CC). The client - server architecture of the developed communication system is considered in detail. The project related W2E CC serves the aspects of smart distribution also in the context with market activities. Data acquisition and control of the 20/0.4 kV terminals and the various power plants are executed by a mini remote terminal unit. The W2E RTU offers a 100 MBd Ethernet interface providing the IEC 61850 protocol for the access to the communication system. The required application specific extensions of the standards are discussed and the first experiences for application in the practice are demonstrated. (orig.)

  18. Roadmap for optofluidics

    Science.gov (United States)

    Minzioni, Paolo; Osellame, Roberto; Sada, Cinzia; Zhao, S.; Omenetto, F. G.; Gylfason, Kristinn B.; Haraldsson, Tommy; Zhang, Yibo; Ozcan, Aydogan; Wax, Adam; Mugele, Frieder; Schmidt, Holger; Testa, Genni; Bernini, Romeo; Guck, Jochen; Liberale, Carlo; Berg-Sørensen, Kirstine; Chen, Jian; Pollnau, Markus; Xiong, Sha; Liu, Ai-Qun; Shiue, Chia-Chann; Fan, Shih-Kang; Erickson, David; Sinton, David

    2017-09-01

    Optofluidics, nominally the research area where optics and fluidics merge, is a relatively new research field and it is only in the last decade that there has been a large increase in the number of optofluidic applications, as well as in the number of research groups, devoted to the topic. Nowadays optofluidics applications include, without being limited to, lab-on-a-chip devices, fluid-based and controlled lenses, optical sensors for fluids and for suspended particles, biosensors, imaging tools, etc. The long list of potential optofluidics applications, which have been recently demonstrated, suggests that optofluidic technologies will become more and more common in everyday life in the future, causing a significant impact on many aspects of our society. A characteristic of this research field, deriving from both its interdisciplinary origin and applications, is that in order to develop suitable solutions a combination of a deep knowledge in different fields, ranging from materials science to photonics, from microfluidics to molecular biology and biophysics, is often required. As a direct consequence, also being able to understand the long-term evolution of optofluidics research is not easy. In this article, we report several expert contributions on different topics so as to provide guidance for young scientists. At the same time, we hope that this document will also prove useful for funding institutions and stakeholders to better understand the perspectives and opportunities offered by this research field.

  19. Roadmap for optofluidics

    KAUST Repository

    Minzioni, Paolo

    2017-08-22

    Optofluidics, nominally the research area where optics and fluidics merge, is a relatively new research field and it is only in the last decade that there has been a large increase in the number of optofluidic applications, as well as in the number of research groups, devoted to the topic. Nowadays optofluidics applications include, without being limited to, lab-on-a-chip devices, fluid-based and controlled lenses, optical sensors for fluids and for suspended particles, biosensors, imaging tools, etc. The long list of potential optofluidics applications, which have been recently demonstrated, suggests that optofluidic technologies will become more and more common in everyday life in the future, causing a significant impact on many aspects of our society. A characteristic of this research field, deriving from both its interdisciplinary origin and applications, is that in order to develop suitable solutions a combination of a deep knowledge in different fields, ranging from materials science to photonics, from microfluidics to molecular biology and biophysics, is often required. As a direct consequence, also being able to understand the long-term evolution of optofluidics research is not easy. In this article, we report several expert contributions on different topics so as to provide guidance for young scientists. At the same time, we hope that this document will also prove useful for funding institutions and stakeholders to better understand the perspectives and opportunities offered by this research field.

  20. Natural-technological risk assessment and management

    Science.gov (United States)

    Burova, Valentina; Frolova, Nina

    2016-04-01

    EM-DAT statistical data on human impact and economic damages in the 1st semester 2015 are the highest since 2011: 41% of disasters were floods, responsible for 39% of economic damage and 7% of events were earthquakes responsible for 59% of total death toll. This suggests that disaster risk assessment and management still need to be improved and stay the principle issue in national and international related programs. The paper investigates the risk assessment and management practice in the Russian Federation at different levels. The method is proposed to identify the territories characterized by integrated natural-technological hazard. The maps of the Russian Federation zoning according to the integrated natural-technological hazard level are presented, as well as the procedure of updating the integrated hazard level taking into account the activity of separate processes. Special attention is paid to data bases on past natural and technological processes consequences, which are used for verification of current hazard estimation. The examples of natural-technological risk zoning for the country and some regions territory are presented. Different output risk indexes: both social and economic, are estimated taking into account requirements of end-users. In order to increase the safety of population of the Russian Federation the trans-boundaries hazards are also taken into account.

  1. Idaho National Engineering Laboratory installation roadmap document

    International Nuclear Information System (INIS)

    1993-01-01

    The roadmapping process was initiated by the US Department of Energy's office of Environmental Restoration and Waste Management (EM) to improve its Five-Year Plan and budget allocation process. Roadmap documents will provide the technical baseline for this planning process and help EM develop more effective strategies and program plans for achieving its long-term goals. This document is a composite of roadmap assumptions and issues developed for the Idaho National Engineering Laboratory (INEL) by US Department of Energy Idaho Field Office and subcontractor personnel. The installation roadmap discusses activities, issues, and installation commitments that affect waste management and environmental restoration activities at the INEL. The High-Level Waste, Land Disposal Restriction, and Environmental Restoration Roadmaps are also included

  2. SME UNIVERSITY COLLABORATION – A ROADMAP TO SUCCESS

    Directory of Open Access Journals (Sweden)

    Joe ENGLISH

    2013-11-01

    Full Text Available The paper presents the most important results on a methodology of collaboration between universities and SMEs. The SUPORT project examines the current knowledge and technology transfer scenarios between Small and Medium Sized Enterprises (SMEs and Higher Education Institutes (HEIs in six different regions of Europe (Ireland, UK, France, Germany, Poland and Spain. Based on these studies the project developed resources (roadmaps, training courses, on-line materials to enable SMEs to break down barriers and gain access to dormant research at HEIs. Universities are facilitated to find outlets for current and previous research, making them more responsive to current market needs. Based on these results the paper is indicated graphical roadmaps to guide participants in collaboration projects – one map specifically for HEI personnel and another for SMEs. These road maps are designed as ‘aides memoire’ for researchers and owner/managers as they embark upon, and deliver collaboration projects.

  3. Technology enhanced peer learning and peer assessment

    DEFF Research Database (Denmark)

    Henriksen, Christian Bugge; Bregnhøj, Henrik; Rosthøj, Susanne

    2016-01-01

    This paper explores the application of learning designs featuring formalised and structured technology enhanced peer learning. These include student produced learning elements, peer review discussions and peer assessment in the BSc/MSc level summer course Restoration of European Ecosystems...... and Freshwaters (REEF), the Master thesis preparation seminars for the Master of Public Health (MPH) and the MOOC course Global Environmental Management (GEM). The application of student produced learning elements and peer review discussions is investigated by analyzing quotes from course evaluations...

  4. Technological and physics assessments on heating and current drive systems for DEMO

    Energy Technology Data Exchange (ETDEWEB)

    Franke, Thomas, E-mail: thomas.franke@efda.org [EFDA Close Support Unit, Boltzmannstr. 2, D-85748 Garching (Germany); Max Planck Institute for Plasma Physics, Boltzmannstr. 2, D-85748 Garching (Germany); Barbato, E. [Unità Tecnica Fusione ENEA, C. R. Frascati, via E. Fermi 45, 00044 Frascati (Roma) (Italy); Bosia, G. [Department of Physics, University of Turin, Via P. Giuria 1, 10125 Turin (Italy); Cardinali, A.; Ceccuzzi, S.; Cesario, R. [Unità Tecnica Fusione ENEA, C. R. Frascati, via E. Fermi 45, 00044 Frascati (Roma) (Italy); Van Eester, D. [Laboratory for Plasma Physics, LPP-ERM/KMS, TEC & Belgian EUROfusion Consortium Partner, Brussels (Belgium); Federici, G. [EFDA Close Support Unit, Boltzmannstr. 2, D-85748 Garching (Germany); Gantenbein, G. [Karlsruhe Institute of Technology (KIT), Association EURATOM-KIT, Kaiserstrasse 12, 76131 Karlsruhe (Germany); Helou, W.; Hillairet, J. [CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France); Jenkins, I. [CCFE, Culham Science Centre, Abingdon OX143DB (United Kingdom); Kazakov, Ye.O. [Laboratory for Plasma Physics, LPP-ERM/KMS, TEC & Belgian EUROfusion Consortium Partner, Brussels (Belgium); Kemp, R. [CCFE, Culham Science Centre, Abingdon OX143DB (United Kingdom); Lerche, E. [Laboratory for Plasma Physics, LPP-ERM/KMS, TEC & Belgian EUROfusion Consortium Partner, Brussels (Belgium); Mirizzi, F. [Unità Tecnica Fusione ENEA, C. R. Frascati, via E. Fermi 45, 00044 Frascati (Roma) (Italy); Noterdaeme, J.-M.; Poli, E. [Max Planck Institute for Plasma Physics, Boltzmannstr. 2, D-85748 Garching (Germany); Porte, L. [Centre de Recherches en Physique des Plasmas, Ecole Polytechnique Fédérale de Lausanne (EPFL), Station 13, CH-1015 Lausanne (Switzerland); Ravera, G.L. [Unità Tecnica Fusione ENEA, C. R. Frascati, via E. Fermi 45, 00044 Frascati (Roma) (Italy); and others

    2015-10-15

    Highlights: • Basic physics requirements of H&CD systems in DEMO have been captured. • The four H&CD systems NBI, EC, IC and LH were analysed to optimize performance. • Novel solutions were studied to overcome the limitations of the present H&CD systems. • RAMI as well as efficiency and optimized design of H&CD systems have been assessed. • Further constraints by remote maintenance or breeding blanket interactions were considered. - Abstract: The physics requirements of the heating and current (H&CD) systems in a Demonstration Fusion Power Plant (DEMO) are often beyond the actual level of design maturity and technology readiness required. The recent EU fusion roadmap advocates a pragmatic approach and favours, for the initial design integration studies, systems to be as much as possible, extrapolated from the ITER experience. To reach the goal of demonstrating the production of electricity in DEMO with a closed fuel cycle by 2050, one must ensure reliability, availability, maintainability, inspectability (RAMI) as well as performance, efficiency and optimized design for the H&CD systems. In the recent Power Plant Physics & Technology (PPP&T) Work Programme, a number of H&CD studies were performed. The four H&CD systems Neutral Beam (NB) Injection, Electron Cyclotron (EC), Ion Cyclotron (IC) and Lower Hybrid (LH) were considered. First, a physics optimization study was made assuming all technologies are available and identifying which parameters are needed to optimize the performance for given plasma parameters. Separately, the (i) technological maturity was considered (e.g. 240 GHz gyrotrons for EC) and (ii) technologies were adapted (e.g. multi-stage depressed collector for EC) or (iii) novel solutions (e.g. photo-neutralization for NB or new antennae concepts for IC) were studied to overcome the limitations of the present H&CD systems with respect to DEMO requirements. Further constraints imposed by remote maintenance or breeding blanket interactions

  5. Tiger Team Assessment, Energy Technology Engineering Center

    International Nuclear Information System (INIS)

    1991-04-01

    The Office Special Projects within the Office of Environment, Safety, and Health (EH) has the responsibility to conduct Tiger Team Assessments for the Secretary of Energy. This report presents the assessment of the buildings, facilities, and activities under the DOE/Rockwell Contract No. DE-AM03-76SF00700 for the Energy Technology Engineering Center (ETEC) and of other DOE-owned buildings and facilities at the Santa Susana Field Laboratory (SSFL) site in southeastern Ventura County, California, not covered under Contract No. DE-AM03-76SF00700, but constructed over the years under various other contracts between DOE and Rockwell International. ETEC is an engineering development complex operated for DOE by the Rocketdyne Division of Rockwell International Corporation. ETEC is located within SSFL on land owned by Rockwell. The balance of the SSFL complex is owned and operated by Rocketdyne, with the exception of a 42-acre parcel owned by the National Aeronautics and Space Administration (NASA). The primary mission of ETEC is to provide engineering, testing, and development of components related to liquid metals technology and to conduct applied engineering development of emerging energy technologies

  6. Tiger Team Assessment, Energy Technology Engineering Center

    Energy Technology Data Exchange (ETDEWEB)

    1991-04-01

    The Office Special Projects within the Office of Environment, Safety, and Health (EH) has the responsibility to conduct Tiger Team Assessments for the Secretary of Energy. This report presents the assessment of the buildings, facilities, and activities under the DOE/Rockwell Contract No. DE-AM03-76SF00700 for the Energy Technology Engineering Center (ETEC) and of other DOE-owned buildings and facilities at the Santa Susana Field Laboratory (SSFL) site in southeastern Ventura County, California, not covered under Contract No. DE-AM03-76SF00700, but constructed over the years under various other contracts between DOE and Rockwell International. ETEC is an engineering development complex operated for DOE by the Rocketdyne Division of Rockwell International Corporation. ETEC is located within SSFL on land owned by Rockwell. The balance of the SSFL complex is owned and operated by Rocketdyne, with the exception of a 42-acre parcel owned by the National Aeronautics and Space Administration (NASA). The primary mission of ETEC is to provide engineering, testing, and development of components related to liquid metals technology and to conduct applied engineering development of emerging energy technologies.

  7. Constructive Technology Assessment for HIT development

    DEFF Research Database (Denmark)

    Høstgaard, Anna Marie Balling; Bertelsen, Pernille; Petersen, Lone Stub

    2013-01-01

    Experience and time has shown a need for new evaluation methods for evaluating Health Information Technology (HIT), as summative evaluation methods fail to accommodate the rapid and constant changes in HIT over time and to involve end-users, which has been recognized as an important success facto...... during all the phases in the process. Thereby anumber of problems were prevented to occur later on.Thus, the CTA method and its framework are useful for evaluators and project-management in order to facilitate and support successful HIT development.......Experience and time has shown a need for new evaluation methods for evaluating Health Information Technology (HIT), as summative evaluation methods fail to accommodate the rapid and constant changes in HIT over time and to involve end-users, which has been recognized as an important success factor...... in HIT development. A new evaluation methodology, including an analytical framework, has been developed specifically for HIT development: Constructive Technology Assessment (CTA) for HIT. It offers solutions to both the problems associated with summative technology evaluation and a way to involve end...

  8. Thai health technology assessment guideline development.

    Science.gov (United States)

    Teerawattananon, Yot; Chaikledkaew, Usa

    2008-06-01

    Health Technology Assessment (HTA) is a comprehensive form of policy research that provides information on the consequences of the application of health technology. It is used primarily to guide health care resource allocation decisions. In Thailand, there is increasing impetus to use HTA information to allow more explicit and transparent health care priority setting. A previous study indicated that serious attention needed to be given to the quality of reporting and the use of information in the analyses. These problems could be reduced by setting up standard guidelines for conducting HTA to stimulate the provision of standardized, reliable and good quality information for policy makers. Nevertheless, Thailand has not yet set up such guidelines. This may lead to low quality evaluations. Therefore, the objective of this article was to describe the rationale for guideline development, supporting principles, guideline development process, sources of information, and future challenges for HTA.

  9. Road-map for 2. generation biofuels

    International Nuclear Information System (INIS)

    2009-01-01

    This document presents road-map issues concerning the requirements for biofuels of second generation, and defines the priorities addressed by a demonstrator program. It recalls the context created by the challenges of climate change and the excessive dependence on fossil fuels, and the objectives defined by the European Union in terms of biofuel share in the global consumption. Then, it describes the candidate technologies for the production of this second generation of biofuels, those based on thermo-chemical processes (mainly the pyrolysis-gasification of biomass), and those based on biochemical processes (enzymatic hydrolysis and fermentation of biomass). It highlights the technological challenges for these processes, and describes the various objectives of research projects supported by a 'demonstrator fund'. It discusses the necessity to develop demonstrators, and mentions some current projects of private companies, competitiveness clusters, and public research institutions. An agenda is defined from 2009 to 2020 which encompasses the research, demonstration and operation phases. An appendix provides brief presentations of thermo-chemical or biological demonstrators currently under operation or under construction in foreign countries (Germany, Finland, United States of America, Sweden, Spain, Canada, Japan, and Denmark)

  10. Health technology assessment in the United Kingdom.

    Science.gov (United States)

    Woolf, S H; Henshall, C

    2000-01-01

    The National Health Service (NHS) provides universal health coverage for all British citizens. Most services are free of charge, although modest copayments are sometimes applied. About 11% of the population also has private insurance. General practitioners, generally the first point of contact for accessing the system, are independent contractors who serve as gatekeepers for specialist and hospital services and enjoy substantial clinical autonomy. Hospitals are public and are regionalized, but the 1990 reforms made them self-governing trusts that contract with local purchasers (health authorities and general practitioner fundholders). Reforms beginning in 1990 moved the NHS away from a centralized administrative structure to more pluralistic arrangements in which competition, as well as management, influences how services develop. Health technology and health technology assessment (HTA) have gained increasing attention in the NHS during this period, as part of a wider NHS Research and Development (R&D) Strategy. The strategy promotes a knowledge-based health service with a strong research infrastructure and the capacity to critically review its own needs. HTA is the largest and most developed of the programs within the strategy. It has a formal system for setting assessment priorities involving widespread consultation within the NHS, and a National Co-ordinating Centre for Health Technology Assessment. The strategy supports related centers such as the U.K. Cochrane Centre and the NHS Centre for Reviews and Dissemination. A hallmark of the HTA program is strong public participation. The United Kingdom has made a major commitment to HTA and to seeking effective means of reviewing and disseminating evidence.

  11. Hydrogen delivery technology rRoadmap

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2005-11-01

    Hydrogen holds the long-term potential to solve two critical problems related to the energy infrastructure: U.S. dependence on foreign oil and U.S. emissions of greenhouse gases and pollutants. The U.S. transportation sector is almost completely reliant on petroleum, over half of which is currently imported, and tailpipe emissions remain one of the country’s key air quality concerns. Fuel cell vehicles operating on hydrogen produced from domestically available resources – including renewable resources, coal with carbon sequestration, or nuclear energy – would dramatically decrease greenhouse gases and other emissions, and would reduce dependence on oil from politically volatile regions of the world. Clean, domestically-produced hydrogen could also be used to generate electricity in stationary fuel cells at power plants, further extending national energy and environmental benefits.

  12. Technology Assessment Need: Review on Attractiveness and Competitiveness

    Science.gov (United States)

    Salwa Sait, Siti; Merlinda Muharam, Farrah; Chin, Thoo Ai; Sulaiman, Zuraidah

    2017-06-01

    Technology assessment is crucial in managing technology for the purpose of technology exploitation. With business environment continuously changing, firms have to address this issue critically as technology is considered one of the important elements to evaluate performance and gain competitive advantage. Missteps in deciding the best technology to be developed, employed or maintained would cost the firm overall value. To fulfil the need of finding the appropriate scale to assess suitable technology, this paper summarizes that technology assessment (TA) should cover two main aspects, namely technology attractiveness and competitiveness. These components are seen capable to link the scale suggested towards evaluation of financial and non-financial performance towards competitive advantage.

  13. [Hospital-based Health Technology Assessment].

    Science.gov (United States)

    Zavadil, Martin; Rogalewicz, Vladimír; Kubátová, Ivana; Matloňová, Veronika; Salačová, Kristýna

    Hospital-based HTA (HB-HTA) consists in implementation of assessment activities "in" or "for" hospitals; hence, it covers processes and methods supporting organization and execution of health technology assessment (HTA) at the level of individual hospitals. This process is multidisciplinary, systematic and evidence-based.HB-HTA objectives and methods differ from the classic utilization of HTA at the national regulator level. Most experience and information concerning HB-HTA has originated in two large recent projects: activities of the HB-HTA Interest Group of the HTAi international association established in 2006, and the AdHopHTA European research project (20122015).This paper describes four basic organizational models of HB-HTA, their characteristics and utilization in various countries and hospital types. Results of the AdHopHTA project are analyzed, and recommendations for HB-HTA implementation in Czech hospitals are formulated.Key words: hospital-based HTA, medical device, implementation, hospital strategy.

  14. Technology needs assessment for DOE environmental restoration programs

    International Nuclear Information System (INIS)

    Duray, J.R.; Carlson, T.J.; Carpenter, C.E.; Cummins, L.E.; Daub, G.J.

    1992-01-01

    The 'Technology Needs Assessment Final Report' describes current and planned environmental restoration activity, identifies technologies intended to be used or under consideration, and ranks technology deficiencies in the U.S. Department of Energy's environmental restoration program. Included in the ranking are treatment technologies, characterization technologies, and non-technology issues that affect environmental restoration. Data used for the assessment was gathered during interviews in the spring of 1991 with DOE site personnel responsible for the environmental restoration work. (author)

  15. Integrated assessment of bioelectricity technology options

    International Nuclear Information System (INIS)

    Thornley, Patricia; Upham, Paul; Huang, Ye; Rezvani, Sina; Brammer, John; Rogers, John

    2009-01-01

    Power generation from biomass is a sustainable energy technology which can contribute to substantial reductions in greenhouse gas emissions, but with greater potential for environmental, economic and social impacts than most other renewable energy technologies. It is important therefore in assessing bioenergy systems to take account of not only technical, but also environmental, economic and social parameters on a common basis. This work addresses the challenge of analysing, quantifying and comparing these factors for bioenergy power generation systems. A life-cycle approach is used to analyse the technical, environmental, economic and social impacts of entire bioelectricity systems, with a number of life-cycle indicators as outputs to facilitate cross-comparison. The results show that similar greenhouse gas savings are achieved with the wide variety of technologies and scales studied, but land-use efficiency of greenhouse gas savings and specific airborne emissions varied substantially. Also, while specific investment costs and electricity costs vary substantially from one system to another the number of jobs created per unit of electricity delivered remains roughly constant. Recorded views of stakeholders illustrate that diverging priorities exist for different stakeholder groups and this will influence appropriate choice of bioenergy systems for different applications

  16. Fusing Self-Regulated Learning and Formative Assessment: A Roadmap of Where We Are, How We Got Here, and Where We Are Going

    Science.gov (United States)

    Panadero, Ernesto; Andrade, Heidi; Brookhart, Susan

    2018-01-01

    We have known for a long time that a relationship exists between how learning is assessed and the learning processes and strategies students employ when engaged in those assessments. Black and Wiliam pointed out in 1998 that self-regulated learning should be a primary goal of formative assessment (FA). Since then, a growing body of research on…

  17. A roadmap towards personalized immunology.

    Science.gov (United States)

    Delhalle, Sylvie; Bode, Sebastian F N; Balling, Rudi; Ollert, Markus; He, Feng Q

    2018-01-01

    Big data generation and computational processing will enable medicine to evolve from a "one-size-fits-all" approach to precise patient stratification and treatment. Significant achievements using "Omics" data have been made especially in personalized oncology. However, immune cells relative to tumor cells show a much higher degree of complexity in heterogeneity, dynamics, memory-capability, plasticity and "social" interactions. There is still a long way ahead on translating our capability to identify potentially targetable personalized biomarkers into effective personalized therapy in immune-centralized diseases. Here, we discuss the recent advances and successful applications in "Omics" data utilization and network analysis on patients' samples of clinical trials and studies, as well as the major challenges and strategies towards personalized stratification and treatment for infectious or non-communicable inflammatory diseases such as autoimmune diseases or allergies. We provide a roadmap and highlight experimental, clinical, computational analysis, data management, ethical and regulatory issues to accelerate the implementation of personalized immunology.

  18. A roadmap towards personalized immunology

    DEFF Research Database (Denmark)

    Delhalle, Sylvie; Bode, Sebastian F N; Balling, Rudi

    2018-01-01

    Big data generation and computational processing will enable medicine to evolve from a "one-size-fits-all" approach to precise patient stratification and treatment. Significant achievements using "Omics" data have been made especially in personalized oncology. However, immune cells relative......-centralized diseases. Here, we discuss the recent advances and successful applications in "Omics" data utilization and network analysis on patients' samples of clinical trials and studies, as well as the major challenges and strategies towards personalized stratification and treatment for infectious or non......-communicable inflammatory diseases such as autoimmune diseases or allergies. We provide a roadmap and highlight experimental, clinical, computational analysis, data management, ethical and regulatory issues to accelerate the implementation of personalized immunology....

  19. Army Net Zero: Energy Roadmap and Program Summary, Fiscal Year 2013 (Brochure)

    Energy Technology Data Exchange (ETDEWEB)

    2014-08-01

    The U.S. Army (Army) partnered with the National Renewable Energy Laboratory (NREL) and the U.S. Army Corps of Engineers to assess opportunities for increasing energy security through improved energy efficiency and optimized renewable energy strategies at nine installations across the Army's portfolio. Referred to as Net Zero Energy Installations (NZEIs), these projects demonstrate and validate energy efficiency and renewable energy technologies with approaches that can be replicated across DOD and other Federal agencies, setting the stage for broad market adoption. This report summarizes the results of the energy project roadmaps developed by NREL, shows the progress each installation could make in achieving Net Zero Energy by 2020, and presents lessons learned and unique challenges from each installation.

  20. Codes & standards research, development & demonstration Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2008-07-22

    This Roadmap is a guide to the Research, Development & Demonstration activities that will provide data required for SDOs to develop performance-based codes and standards for a commercial hydrogen fueled transportation sector in the U.S.

  1. Roadmap-Based Level Clearing of Buildings

    KAUST Repository

    Rodriguez, Samuel

    2011-01-01

    In this paper we describe a roadmap-based approach for a multi-agent search strategy to clear a building or multi-story environment. This approach utilizes an encoding of the environment in the form of a graph (roadmap) that is used to encode feasible paths through the environment. The roadmap is partitioned into regions, e.g., one per level, and we design region-based search strategies to cover and clear the environment. We can provide certain guarantees within this roadmap-based framework on coverage and the number of agents needed. Our approach can handle complex and realistic environments where many approaches are restricted to simple 2D environments. © 2011 Springer-Verlag.

  2. VistA 4 Product Roadmap

    Data.gov (United States)

    Department of Veterans Affairs — The VistA 4 Product Roadmap outlines how the Department of Veterans Affairs (VA), under the direction of the VistA Evolution Program, will build upon the previous...

  3. Impact assessment of Iran's health technology assessment programme.

    Science.gov (United States)

    Yazdizadeh, Bahareh; Mohtasham, Farideh; Velayati, Ashraf

    2018-02-22

    Following approximately 10 years from the beginning of Iran's national Health Technology Assessment (HTA) programme, the present study aims to evaluate its success by examining the impact of HTA and identifying the determinant factors leading to the implementation of HTA report results. The triangulation method was employed herein. HTA reports were initially identified and their impact and determinant factors were then examined from the perspectives of both researchers (by preparing a questionnaire according to the Payback model and sending it to HTA principle investigators) and stakeholders (semi-structured interviews held with each HTA stakeholder). Simultaneously, the quality of the HTA reports was examined with relevant critical appraisal checklists. The impact of 19 equipment technologies and four pharmaceutical technologies were assessed in this study. Twenty researchers replied (response rate, 86.96%) to the questionnaire on the impact of HTA reports from the researcher's perspective. To assess the impact of HTA reports from the stakeholder's perspective, seven policy-makers were chosen and interviewed as the main target audience. The most common step taken to disseminate the results of the HTA projects was publication. Conducting the HTA had taught researchers and their colleagues' new skills and had facilitated the securing of research grants from other organisations. Most reports had used the systematic review method but the relevant details had been scarcely presented regarding outcomes, costs and analysis. The greatest impact of HTA reports on decision-making had been on policy-makers providing and allocating finances. Barriers in stewardship, identification and prioritisation of topics, performance and dissemination of HTA results were the main barriers of implementing HTAs. In most aspects, the status of HTA impact reports need improvement. Thus far, the barriers and facilitators of the HTA programme in Iran have been investigated in other studies

  4. Roadmap on semiconductor-cell biointerfaces

    Science.gov (United States)

    Tian, Bozhi; Xu, Shuai; Rogers, John A.; Cestellos-Blanco, Stefano; Yang, Peidong; Carvalho-de-Souza, João L.; Bezanilla, Francisco; Liu, Jia; Bao, Zhenan; Hjort, Martin; Cao, Yuhong; Melosh, Nicholas; Lanzani, Guglielmo; Benfenati, Fabio; Galli, Giulia; Gygi, Francois; Kautz, Rylan; Gorodetsky, Alon A.; Kim, Samuel S.; Lu, Timothy K.; Anikeeva, Polina; Cifra, Michal; Krivosudský, Ondrej; Havelka, Daniel; Jiang, Yuanwen

    2018-05-01

    This roadmap outlines the role semiconductor-based materials play in understanding the complex biophysical dynamics at multiple length scales, as well as the design and implementation of next-generation electronic, optoelectronic, and mechanical devices for biointerfaces. The roadmap emphasizes the advantages of semiconductor building blocks in interfacing, monitoring, and manipulating the activity of biological components, and discusses the possibility of using active semiconductor-cell interfaces for discovering new signaling processes in the biological world.

  5. History of health technology assessment: Spain.

    Science.gov (United States)

    Sampietro-Colom, Laura; Asua, Jose; Briones, Eduardo; Gol, Jordi

    2009-07-01

    The aim of this study was to describe the characteristics of the introduction and diffusion of health technology assessment (HTA) in Spain. A survey to summarize the evolution of HTA was sent to representatives of different HTA initiatives in Spain. HTA was introduced in the late 1980s. The main factors were the trend to an increase in healthcare expenditure, concerns regarding efficiency in providing health care, as well as in the level of rationality introducing high technology. Spain has direct (i.e., regulation) and indirect (i.e., payment systems, evidence-based programs, HTA) mechanisms to control health technologies. A recent high priority regulation has established the need of HTA to decide the introduction of a new health technology in the lists of public healthcare coverage, although similar regulations existed in the past and were scarcely implemented. HTA initiatives started at the regional government level. Its introduction followed a progressive pattern among regions. In the beginning, resources were scarce and expertise limited, with work done at intramural level. With time, expertise increase, and promotion of commissioned work was implemented. HTA knowledge transfer in the healthcare system has been carried out through courses, publications, and commissioned research. Currently, there are seven HTA units/agencies, which coordinate their work. HTA in Spain is in its maturity. Facing the unavoidable change of health care environment over time, HTA is also evolving and, currently, there is a trend to broaden the areas of influence of HTA by devolving capacity to hospitals and applying principles to very early phases of health technology development, under the umbrella of regional HTA units/agencies. However, there are two main challenges ahead. One is to have a real impact at the highest level of healthcare policy coordination among Spanish regions, which is done at the Central Ministry of Health. The other is to avoid the influence of political waves

  6. New technologies - How to assess environmental effects

    Science.gov (United States)

    Sullivan, P. J.; Lavin, M. L.

    1981-01-01

    A method is provided for assessing the environmental effects of a room-and-pillar mining system (RP) and a new hydraulic borehole mining system (HBM). Before environmental assessment can begin, each technology is defined in terms of its engineering characteristics at both the conceptual and preliminary design stages. The mining sites are also described in order to identify the significant advantages and constraints for each system. This can be a basic physical and biological survey of the region at the conceptual stage, but a more specific representation of site characteristics is required at the preliminary stage. Assessment of potential environmental effects of each system at the conceptual design is critical to its hardware development and application. A checklist can be used to compare and identify the negative impacts of each method, outlining the resource affected, the type of impact involved, and the exact activity causing that impact. At the preliminary design stage, these impacts should be evaluated as a result of either utilization or alteration. Underground coal mining systems have three major utilization impacts - the total area disturbed, the total water resources withdrawn from other uses, and the overall energy efficiency of the process - and one major alteration impact - the degradation of water quality by sedimentation and acid contamination. A comparison of the RP and HBM systems shows the HBM to be an environmentally less desirable system for the Central Appalachia region.

  7. NASA's Microgravity Fluid Physics Strategic Research Roadmap

    Science.gov (United States)

    Motil, Brian J.; Singh, Bhim S.

    2004-01-01

    The Microgravity Fluid Physics Program at NASA has developed a substantial investigator base engaging a broad crosssection of the U.S. scientific community. As a result, it enjoys a rich history of many significant scientific achievements. The research supported by the program has produced many important findings that have been published in prestigious journals such as Science, Nature, Journal of Fluid Mechanics, Physics of Fluids, and many others. The focus of the program so far has primarily been on fundamental scientific studies. However, a recent shift in emphasis at NASA to develop advanced technologies to enable future exploration of space has provided motivation to add a strategic research component to the program. This has set into motion a year of intense planning within NASA including three workshops to solicit inputs from the external scientific community. The planning activities and the workshops have resulted in a prioritized list of strategic research issues along with a corresponding detailed roadmap specific to fluid physics. The results of these activities were provided to NASA s Office of Biological and Physical Research (OBPR) to support the development of the Enterprise Strategy document. This paper summarizes these results while showing how the planned research supports NASA s overall vision through OBPR s organizing questions.

  8. An Assessment of Emerging Wireless Broadband Technologies

    National Research Council Canada - National Science Library

    Fountanas, Leonidas

    2001-01-01

    ... technologies in providing broadband services today, emerging wireless broadband technologies are expected to significantly increase their market share over the next years, Deploying a wireless network...

  9. Drug delivery system innovation and Health Technology Assessment: Upgrading from Clinical to Technological Assessment.

    Science.gov (United States)

    Panzitta, Michele; Bruno, Giorgio; Giovagnoli, Stefano; Mendicino, Francesca R; Ricci, Maurizio

    2015-11-30

    Health Technology Assessment (HTA) is a multidisciplinary health political instrument that evaluates the consequences, mainly clinical and economical, of a health care technology; the HTA aim is to produce and spread information on scientific and technological innovation for health political decision making process. Drug delivery systems (DDS), such as nanocarriers, are technologically complex but they have pivotal relevance in therapeutic innovation. The HTA process, as commonly applied to conventional drug evaluation, should upgrade to a full pharmaceutical assessment, considering the DDS complexity. This is useful to study more in depth the clinical outcome and to broaden its critical assessment toward pharmaceutical issues affecting the patient and not measured by the current clinical evidence approach. We draw out the expertise necessary to perform the pharmaceutical assessment and we propose a format to evaluate the DDS technological topics such as formulation and mechanism of action, physicochemical characteristics, manufacturing process. We integrated the above-mentioned three points in the Evidence Based Medicine approach, which is data source for any HTA process. In this regard, the introduction of a Pharmaceutics Expert figure in the HTA could be fundamental to grant a more detailed evaluation of medicine product characteristics and performances and to help optimizing DDS features to overcome R&D drawbacks. Some aspects of product development, such as manufacturing processes, should be part of the HTA as innovative manufacturing processes allow new products to reach more effectively patient bedside. HTA so upgraded may encourage resource allocating payers to invest in innovative technologies and providers to focus on innovative material properties and manufacturing processes, thus contributing to bring more medicines in therapy in a sustainable manner. Copyright © 2015 Elsevier B.V. All rights reserved.

  10. The development of the Sustainable Technology Balance Sheet: a generic technology assessment tool to assess the sustainability of renewable energy technologies.

    CSIR Research Space (South Africa)

    Peach, W

    2010-06-01

    Full Text Available on Sustainable Development NPV Net Present Value NSF National Science Foundation OTA Office of Technology Assessment PIA Privacy Impact Assessments PPP Public-Private Partnership pTA Participatory Technology Assessment RA Risk Assessment... 2.1. The history and development of TA After the establishment of the USA Congressional Office of Technology Assessment (OTA) in 1972, forms of formal energy technology assessment began to take shape. These were defined as a ?comprehensive form...

  11. The World Heart Federation Roadmap for Nonvalvular Atrial Fibrillation.

    Science.gov (United States)

    Murphy, Adrianna; Banerjee, Amitava; Breithardt, Günter; Camm, A John; Commerford, Patrick; Freedman, Ben; Gonzalez-Hermosillo, J Antonio; Halperin, Jonathan L; Lau, Chu-Pak; Perel, Pablo; Xavier, Denis; Wood, David; Jouven, Xavier; Morillo, Carlos A

    2017-12-01

    The World Heart Federation has undertaken an initiative to develop a series of Roadmaps to promote development of national policies and health systems approaches, and to identify potential roadblocks on the road to effective prevention, detection, and management of cardiovascular disease in low-and middle-income countries (LMICs) and develop strategies for overcoming these. This Roadmap focuses on atrial fibrillation (AF). AF is the most common, clinically significant arrhythmia and, among other clinical outcomes, is associated with increased risk of stroke. Development of this Roadmap included a review of published guidelines and research papers, and consultation with an expert committee comprising experts in clinical management of AF and health systems research in LMICs. The Roadmap identifies 1) key interventions for detection, diagnosis, and management of AF; 2) gaps in implementation of these interventions (knowledge-practice gaps); 3) health system roadblocks to implementation of AF interventions in LMICs; and 4) potential strategies for overcoming these. More research is needed on determinants and primary prevention of AF. Knowledge-practice gaps for detection, diagnosis, and management of AF are present worldwide, but may be more prominent in LMICs. Potential barriers to implementation of AF interventions include long distances to health facilities, shortage of health care professionals with training in AF, including interpretation of ECG, unaffordability of oral anticoagulants for patient households, reluctance on the part of physicians to initiate oral anticoagulant (OAC) therapy, and lack of awareness of the importance of persistent adherence to OAC therapy. Potential solutions include training of nonphysician health workers and pharmacists in pulse-taking, use of telemedicine technologies to transmit electrocardiogram results, engagement of nonphysician health workers in OAC therapy adherence support, and country-specific support and education programs

  12. Cross-functional shifts in roadmapping : Sequence analysis of roadmapping practices at a large corporation

    NARCIS (Netherlands)

    Simonse, W.L.; Perks, H.

    2014-01-01

    This study unravels the nature of inter-functional integration in roadmapping. Roadmapping is indicated as an important innovation phenomenon and is practiced by multiple large organizations. Functional integration is widely acknowledged to play a significant role in enhancing new product success.

  13. Technology assessment Jordan Nuclear Power Plant Project

    International Nuclear Information System (INIS)

    2010-01-01

    Preliminary regional analysis was carried out for identification of potential sites for NPP, followed by screening of these sites and selecting candidate sites. Aqaba sites are proposed, where it can use the sea water for cooling: i.Site 1; at the sea where it can use the sea water for direct cooling. ii.Site 2; 10 km to the east of Gulf of Aqaba shoreline at the Saudi Arabia borders. iii.Site 3, 4 km to the east of Gulf of Aqaba shoreline. Only the granitic basement in the east of the 6 km²site should be considered as a potential site for a NPP. Preliminary probabilistic seismic hazard assessment gives: Operating-Basis Earthquake-OBE (475 years return period) found to be in the range of 0.163-0.182 g; Safe Shutdown Earthquake-SSE (10,000 years return period) found to be in the range of 0.333-0.502g. The process include also setting up of nuclear company and other organizational matters. Regulations in development are: Site approval; Construction permitting; Overall licensing; Safety (design, construction, training, operations, QA); Emergency planning; Decommissioning; Spent fuel and RW management. JAEC's technology assessment strategy and evaluation methodology are presented

  14. Superconductivity and the environment: a Roadmap

    Science.gov (United States)

    Nishijima, Shigehiro; Eckroad, Steven; Marian, Adela; Choi, Kyeongdal; Kim, Woo Seok; Terai, Motoaki; Deng, Zigang; Zheng, Jun; Wang, Jiasu; Umemoto, Katsuya; Du, Jia; Febvre, Pascal; Keenan, Shane; Mukhanov, Oleg; Cooley, Lance D.; Foley, Cathy P.; Hassenzahl, William V.; Izumi, Mitsuru

    2013-11-01

    There is universal agreement between the United Nations and governments from the richest to the poorest nations that humanity faces unprecedented global challenges relating to sustainable energy, clean water, low-emission transportation, coping with climate change and natural disasters, and reclaiming use of land. We have invited researchers from a range of eclectic research areas to provide a Roadmap of how superconducting technologies could address these major challenges confronting humanity. Superconductivity has, over the century since its discovery by Kamerlingh Onnes in 1911, promised to provide solutions to many challenges. So far, most superconducting technologies are esoteric systems that are used in laboratories and hospitals. Large science projects have long appreciated the ability of superconductivity to efficiently create high magnetic fields that are otherwise very costly to achieve with ordinary materials. The most successful applications outside of large science are high-field magnets for magnetic resonance imaging, laboratory magnetometers for mineral and materials characterization, filters for mobile communications, and magnetoencephalography for understanding the human brain. The stage is now set for superconductivity to make more general contributions. Humanity uses practically unthinkable amounts of energy to drive our modern way of life. Overall, global power usage has been predicted to almost double from 16.5 to 30 TW in the next four decades (2011 Equinox Summit: Energy 2030 http://wgsi.org/publications-resources). The economy with which electrons carry energy compels the continued quest for efficient superconducting power generation, energy storage, and power transmission. The growing global population requires new arable land and treatment of water, especially in remote areas, and superconductivity offers unique solutions to these problems. Exquisite detectors give warning of changes that are otherwise invisible. Prediction of climate and

  15. Superconductivity and the environment: a Roadmap

    International Nuclear Information System (INIS)

    Nishijima, Shigehiro; Eckroad, Steven; Marian, Adela; Choi, Kyeongdal; Kim, Woo Seok; Terai, Motoaki; Deng, Zigang; Zheng, Jun; Wang, Jiasu; Umemoto, Katsuya; Du, Jia; Keenan, Shane; Foley, Cathy P; Febvre, Pascal; Mukhanov, Oleg; Cooley, Lance D; Hassenzahl, William V; Izumi, Mitsuru

    2013-01-01

    There is universal agreement between the United Nations and governments from the richest to the poorest nations that humanity faces unprecedented global challenges relating to sustainable energy, clean water, low-emission transportation, coping with climate change and natural disasters, and reclaiming use of land. We have invited researchers from a range of eclectic research areas to provide a Roadmap of how superconducting technologies could address these major challenges confronting humanity. Superconductivity has, over the century since its discovery by Kamerlingh Onnes in 1911, promised to provide solutions to many challenges. So far, most superconducting technologies are esoteric systems that are used in laboratories and hospitals. Large science projects have long appreciated the ability of superconductivity to efficiently create high magnetic fields that are otherwise very costly to achieve with ordinary materials. The most successful applications outside of large science are high-field magnets for magnetic resonance imaging, laboratory magnetometers for mineral and materials characterization, filters for mobile communications, and magnetoencephalography for understanding the human brain. The stage is now set for superconductivity to make more general contributions. Humanity uses practically unthinkable amounts of energy to drive our modern way of life. Overall, global power usage has been predicted to almost double from 16.5 to 30 TW in the next four decades (2011 Equinox Summit: Energy 2030 http://wgsi.org/publications-resources). The economy with which electrons carry energy compels the continued quest for efficient superconducting power generation, energy storage, and power transmission. The growing global population requires new arable land and treatment of water, especially in remote areas, and superconductivity offers unique solutions to these problems. Exquisite detectors give warning of changes that are otherwise invisible. Prediction of climate and

  16. Space Launch System Upper Stage Technology Assessment

    Science.gov (United States)

    Holladay, Jon; Hampton, Bryan; Monk, Timothy

    2014-01-01

    discussed in light of the various missions. For each mission there are several trajectory options and each will be discussed in terms of delta-v required and transit duration. Each propulsion system will be modeled, sized, and judged based on their applicability to the whole range of beyond LEO missions. Criteria for scoring will include the resulting dry mass of the stage, resulting propellant required, time to destination, and an assessment of key enabling technologies. In addition to the larger metrics, this paper will present the results of several coupled sensitivity studies. The ultimate goals of these tools and studies are to provide NASA with the most mass-, technology-, and cost-effective in-space stage for its future exploration missions.

  17. Heat Roadmap Europe 3 (STRATEGO)

    DEFF Research Database (Denmark)

    Connolly, David; Hansen, Kenneth; Drysdale, David

    Heat Roadmap Europe 3 is from work package 2 of the STRATEGO project (http://stratego-project.eu/). It quantifies the impact of implementing various energy efficiency measures in the heating and cooling sectors of five EU Member States: Czech Republic, Croatia, Italy, Romania, and the United King...... States to simultaneously reduce energy demand, imported fossil fuels, carbon dioxide emissions, and the cost of the heating, cooling, and electricity sectors......., and electricity sectors is reduced by an average of ~15% in each country. These initial investments are primarily required in heat savings for the buildings, district heating in urban areas, and electric heat pumps in rural areas. In essence, energy efficiency measures in the heating sector will enable EU Member...... of approximately €1.1 trillion in energy efficiency measures across all five of these countries, between 2010 and 2050, will save enough fuel to reduce the costs of their energy systems. After considering both the initial investment and the resulting savings, the total annual cost of the heating, cooling...

  18. A conceptual framework for energy technology sustainability assessment

    CSIR Research Space (South Africa)

    Musango, Josephine K

    2011-03-01

    Full Text Available Technology assessment has changed in nature over the last four decades from an analytical tool for technology evaluation, which depends heavily on quantitative and qualitative modelling methodologies, into a strategic planning tool for policy making...

  19. History of healthcare technology assessment in Japan.

    Science.gov (United States)

    Hisashige, Akinori

    2009-07-01

    There has been a rapid growth of healthcare technology assessment (HTA) activities among health service researchers and physicians in Japan in the younger generation since the mid-1980s. HTA has become visible since the Ministry of Health, Labor, and Welfare (MHLW) set up the several committees related to HTA in the late 1990s. The MHLW had to participate in regulatory and administrative reform, coping with the serious economic stagnation since 1991, following the economic recession in the 1980s. However, HTA has not been developed as expected. The most important failure is that the application of HTA to health policy has been neglected by the MHLW. Only application to clinical practice has been implemented by developing evidence-based clinical practice guidelines. The MHLW had the main aim of containing costs by reducing excess or useless healthcare services through guidelines, rather than to implement a radical reform. Without a central organization for HTA, several researchers have still continued to do HTA studies, but most researchers and physicians promoting HTA have been moved into diverse related areas. Ultimately, increasing efficiency may be the only way of reconciling rising demands for health care with public financing constraints. Therefore, the reconsideration and reorganization of HTA, which covers not only healthcare services but also the healthcare system as a whole, is becoming an urgent matter for healthcare reform.

  20. INTELLIGENCE AND TRANSPARENCY IN HEALTH TECHNOLOGY ASSESSMENT.

    Science.gov (United States)

    Richardson, Henry S

    2016-01-01

    Current thinking about the methodology of health technology assessment (HTA) seems to be dominated by two fundamental tensions: [1] between maintaining a tight focus on quality-adjusted life-years and broadening its concern out to pay attention to a broader range of factors, and [2] between thinking of the evaluative dimensions that matter as being objectively important factors or as ones that are ultimately of merely subjective importance. In this study, I will argue that health is a tremendously important all-purpose means to enjoying basic human capabilities, but a mere means, and not an end. The ends to which health is a means are manifold, requiring all those engaged in policy making to exercise intelligence in a continuing effort to identify them and to think through how they interrelate. Retreating to the subjective here would be at odds with the basic idea of HTA, which is to focus on certain objectively describable dimensions of what matters about health and to collect empirical evidence rigorously bearing on what produces improvements along those dimensions. To proceed intelligently in doing HTA, it is important to stay open to reframing and refashioning the ends we take to apply to that arena. The only way for that to happen, as an exercise of public, democratic policy making, is for the difficult value questions that arise when ends clash not to be buried in subjective preference information, but to be front-and-center in the analysis.

  1. Problems of method of technology assessment

    International Nuclear Information System (INIS)

    Zimmermann, V.

    1993-03-01

    The study undertakes to analyse the theoretical and methodological structure of Technology Assessment (TA). It is based on a survey of TA studies which provided an important condition for theoreticall sound statements on methodological aspects of TA. It was established that the main basic theoretical problems of TA are in the field of dealing with complexity. This is also apparent in the constitution of problems, the most elementary and central approach of TA. Scientifically founded constitution of problems and the corresponding construction of models call for interdisciplinary scientific work. Interdisciplinarity in the TA research process is achieved at the level of virtual networks, these networks being composed of individuals suited to teamwork. The emerging network structures have an objective-organizational and an ideational basis. The objective-organizational basis is mainly the result of team composition and the external affiliations of the team members. The ideational basis of the virtual network is represented by the team members' mode of thinking, which is individually located at a multidisciplinary level. The theoretical 'skeleton' of the TA knowledge system, which is represented by process knowledge based linkage structures, can be generated and also processed in connection with the knowledge on types of problems, areas of analysis and procedures to deal with complexity. Within this process, disciplinary knowledge is a necessary but not a sufficient condition. Metatheoretical and metadisciplinary knowledge and the correspondingly processes complexity of models are the basis for the necessary methodological awareness, that allows TA to become designable as a research procedure. (orig./HP) [de

  2. Environmental assessment report: Nuclear Test Technology Complex

    International Nuclear Information System (INIS)

    Tonnessen, K.; Tewes, H.A.

    1982-08-01

    The US Department of Energy (USDOE) is planning to construct and operate a structure, designated the Nuclear Test Technology Complex (NTTC), on a site located west of and adjacent to the Lawrence Livermore National Laboratory. The NTTC is designed to house 350 nuclear test program personnel, and will accommodate the needs of the entire staff of the continuing Nuclear Test Program (NTP). The project has three phases: land acquisition, facility construction and facility operation. The purpose of this environmental assessment report is to describe the activities associated with the three phases of the NTTC project and to evaluate potential environmental disruptions. The project site is located in a rural area of southeastern Alameda County, California, where the primary land use is agriculture; however, the County has zoned the area for industrial development. The environmental impacts of the project include surface disturbance, high noise levels, possible increases in site erosion, and decreased air quality. These impacts will occur primarily during the construction phase of the NTTC project and can be mitigated in part by measures proposed in this report

  3. Traumatic Brain Injury Diffusion Magnetic Resonance Imaging Research Roadmap Development Project

    Science.gov (United States)

    2012-10-01

    optical imaging methods, PET/SPECT with radioisotope agents, and other technologies are less generally available or have known limitations. No “one...Brain Injury D-MRI Research Roadmap Development Project. Product Line Review (PLR) meeting, Medical Imaging Technologies. 12 June 2012. 11. Xia...meeting, Medical Imaging Technologies. Presentation slides. 12 June 2012. 1 Product Line Traumatic Brain Injury Diffusion Magnetic Resonance

  4. The Office for Technology Assessment with the German Parliament (TAB)

    International Nuclear Information System (INIS)

    Grunwald, A.; Petermann, T.

    2004-01-01

    TAB was created in 1990 with the aim of providing contributions to the improvement of the information base, particularly for parliamentary decision-making concerning science and technology. Among TAB's tasks are above all the conception and execution of technology assessment projects and the monitoring and analysis of important scientific and technological trends and related societal developments. TAB is managed by the Institute for Technology Assessment and Systems Analysis (ITAS) of the Karlsruhe Research Center. (orig.)

  5. Monoplane 3D Overlay Roadmap versus Conventional Biplane 2D Roadmap Technique for Neurointervenional Procedures.

    Science.gov (United States)

    Jang, Dong-Kyu; Stidd, David A; Schafer, Sebastian; Chen, Michael; Moftakhar, Roham; Lopes, Demetrius K

    2016-09-01

    We investigated whether a 3D overlay roadmap using monoplane fluoroscopy offers advantages over a conventional 2D roadmap using biplane fluoroscopy during endovascular aneurysm treatment. A retrospective chart review was conducted for 131 consecutive cerebral aneurysm embolizations by three neurointerventionalists at a single institution. Allowing for a transition period, the periods from January 2012 to August 2012 (Time Period 1) and February 2013 to July 2013 (Time Period 2) were analyzed for radiation exposure, contrast administration, fluoroscopy time, procedure time, angiographic results, and perioperative complications. Two neurointerventionalists (Group 1) used a conventional 2D roadmap for both Time Periods, and one neurointerventionalist (Group 2) transitioned from a 2D roadmap during Time Period 1 to a 3D overlay roadmap during Time Period 2. During Time Period 2, Group 2 demonstrated reduced fluoroscopy time (poverlay roadmap technique reduced fluoroscopy dose and fluoroscopy time during neurointervention of cerebral aneurysms with similar angiographic occlusions and complications rate relative to biplane 2D roadmap, which implies possible compensation of limitations of monoplane fluoroscopy by 3D overlay technique.

  6. Risk analysis and technology assessment in support of technology development

    NARCIS (Netherlands)

    Wezel, van Annemarie P.; Lente, van Harro; Sandt, van de Johannes J.M.; Bouwmeester, Hans; Vandeberg, Rens L.J.; Sips, Adrienne J.A.M.

    2018-01-01

    Governments invest in “key enabling technologies,” such as nanotechnology, to solve societal challenges and boost the economy. At the same time, governmental agencies demand risk reduction to prohibit any often unknown adverse effects, and industrial parties demand smart approaches to reduce

  7. NASA Astrophysics Technology Needs

    Science.gov (United States)

    Stahl, H. Philip

    2012-01-01

    July 2010, NASA Office of Chief Technologist (OCT) initiated an activity to create and maintain a NASA integrated roadmap for 15 key technology areas which recommend an overall technology investment strategy and prioritize NASA?s technology programs to meet NASA?s strategic goals. Science Instruments, Observatories and Sensor Systems(SIOSS) roadmap addresses technology needs to achieve NASA?s highest priority objectives -- not only for the Science Mission Directorate (SMD), but for all of NASA.

  8. INFORMATION AND COMMUNICATION TECHNOLOGIES TRAINING: CRITERIA FOR INTERNAL QUALITY ASSESSMENT

    Directory of Open Access Journals (Sweden)

    Oleg M. Spirin

    2011-02-01

    Full Text Available In the article the concept of information and communication technology training is specified. It is grounded an internal criteria of information and communication technologies training quality assessment based on experience of the organization, carrying out, analysis of experimental work results on quality assessment of designing, working out, efficiency of methodical system of informatics teachers base vocational training introduction in the conditions of credit-modular technology. Indicators and approaches of their assessment to define the criteria degree are resulted. Indicators of criteria "level differentiation", "individualization" and "intensification" of educational process for information and communication technologies training quality assessment are specified.

  9. Development of Integrated Assessment Technology of Risk and Performance

    International Nuclear Information System (INIS)

    Yang, Jun Eon; Kang, Dae Il; Kang, Hyun Gook

    2010-04-01

    The main idea and contents are summarized as below 1) Development of new risk/performance assessment system innovating old labor-intensive risk assessment structure - New consolidated risk assessment technology from various hazard(flood, fire, seismic in NPP) - BOP model development for performance monitoring - Consolidated risk/performance management system for consistency and efficiency of NPP 2) Resolution technology for pending issues in PSA - Base technology for PSA of digital I and C system - Base technology for seismic PSA reflecting domestic seismic characteristics and aging effect - Uncertainty reduction technology for level 2 PSA and best estimation of containment failure frequency 3) Next generation risk/performance assessment technology - Human-induced error reduction technology for efficient operation of a NPP

  10. Solar sail-solar electric technology readiness and transfer assessment

    Science.gov (United States)

    Chase, R. L.

    1977-01-01

    A method of conducting a technology readiness assessment was developed. It uses existing OAST technology readiness and risk criteria to define a technology readiness factor that considers both the required gain in technology readiness level to achieved technology readiness plus the degree of effort associated with achieving the gain. The results indicate that Solar Electric Propulsion is preferred based on technology readiness criteria. Both Solar Sail and Solar Electric Propulsion have a high level of transfer potential for future NASA missions, and each has considerable technology spillover for non-NASA applications.

  11. Research and Development Roadmap For Next-Generation Low-Global Warming Potential Refrigerants

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2011-07-01

    The Department of Energy commissioned this roadmap to establish a set of high-priority research and development (R&D) activities that will accelerate the transition to low-GWP refrigerants across the entire heating, ventilation, air-conditioning and refrigeration (HVAC&R) industry. The schedule of R&D activities occurs within an accelerated five-year timeframe, and covers several prominent equipment types. The roadmap is organized around four primary objectives to: assess and mitigate safety risks, characterize refrigerant properties, understand efficiency and environmental tradeoffs, and support new refrigerant and equipment development.

  12. The Forest Fibre Industry. 2050 Roadmap to a low-carbon bio-economy

    Energy Technology Data Exchange (ETDEWEB)

    Presas, T.; Mensink, M.

    2011-11-15

    In March 2011, the European Commission published a 'Roadmap for moving to a competitive low-carbon economy in 2050', a discussion document to explore the future of climate change policy. The document models pathways towards 2050 and the possible contribution of different sectors. It will be followed by an 'energy roadmap' towards the end of 2011 and will be combined with other roadmaps on, for example, the future of transport. In time, it will lead to a new 'climate change and energy package'. The outcome will be crucial for Europe's pulp, paper and wood products industries, which operate at the crossroads of renewable energy policy, emission trading, industrial and raw material policies. Climate change policy, too, has a major influence on the future of these sectors. After all, climate change policy is, essentially, industrial policy. This roadmap attempts to lay out the future of the forest fibre industry - the pulp, paper and board and wood products sectors combined - and its potential to meet future consumer demands, stay competitive and deliver a CO2 emission reduction in line with the modelled overall industrial reduction of 80% by 2050, compared to 1990 levels. The roadmap explores the technical, financial and resource constraints that lie ahead, and the policy framework that will be needed to tackle them. Our roadmap is an exploration into the future. The CO2 reduction envisaged can only be achieved when the right policy framework is in place. The sector can play its part as long as it remains profitable and attractive to investments, keeps access to fibre and other raw materials and receives enough support to bring breakthrough technologies within reach.

  13. Review of early assessment models of innovative medical technologies

    DEFF Research Database (Denmark)

    Fasterholdt, Iben; Krahn, Murray D; Kidholm, Kristian

    2017-01-01

    INTRODUCTION: Hospitals increasingly make decisions regarding the early development of and investment in technologies, but a formal evaluation model for assisting hospitals early on in assessing the potential of innovative medical technologies is lacking. This article provides an overview of models...... methods assessing cost-effectiveness are most prevalent in early assessment, but seems ill-suited for early assessment in hospitals. Four models provided some usable elements for the development of a hospital-based model....

  14. Decision Gate Process for Assessment of a Technology Development Portfolio

    Science.gov (United States)

    Kohli, Rajiv; Fishman, Julianna; Hyatt, Mark

    2012-01-01

    The NASA Dust Management Project (DMP) was established to provide technologies (to TRL 6 development level) required to address adverse effects of lunar dust to humans and to exploration systems and equipment, which will reduce life cycle cost and risk, and will increase the probability of sustainable and successful lunar missions. The technology portfolio of DMP consisted of different categories of technologies whose final product is either a technology solution in itself, or one that contributes toward a dust mitigation strategy for a particular application. A Decision Gate Process (DGP) was developed to assess and validate the achievement and priority of the dust mitigation technologies as the technologies progress through the development cycle. The DGP was part of continuous technology assessment and was a critical element of DMP risk management. At the core of the process were technology-specific criteria developed to measure the success of each DMP technology in attaining the technology readiness levels assigned to each decision gate. The DGP accounts for both categories of technologies and qualifies the technology progression from technology development tasks to application areas. The process provided opportunities to validate performance, as well as to identify non-performance in time to adjust resources and direction. This paper describes the overall philosophy of the DGP and the methodology for implementation for DMP, and describes the method for defining the technology evaluation criteria. The process is illustrated by example of an application to a specific DMP technology.

  15. Methodology of constructive technology assessment in health care

    NARCIS (Netherlands)

    Douma, Kirsten F. L.; Karsenberg, Kim; Hummel, Marjan J. M.; Bueno-de-Mesquita, Jolien M.; van Harten, Wim H.

    2007-01-01

    OBJECTIVES: Technologies in health care are evolving quickly, with new findings in the area of biotechnological and genetic research being published regularly. A health technology assessment (HTA) is often used to answer the question of whether the new technology should be implemented into clinical

  16. Beyond checklists: toward an ethical-constructive technology assessment

    NARCIS (Netherlands)

    Kiran, Asle; Oudshoorn, Nelly E.J.; Verbeek, Peter P.C.C.

    2015-01-01

    While many technology assessments (TAs) formally conducted by TA organizations in Europe and the USA have examined the implications of new technologies for ‘quantifiable risks’ regarding safety, health or the environment, they have largely ignored the ethical implications of those technologies.

  17. Methodology of constructive technology assessment in health care

    NARCIS (Netherlands)

    Douma, Kirsten F.L.; Hummel, J. Marjan; Karsenberg, Kim; van Harten, Willem H.; Bueno-de-Mesquita, Jolien M.

    2007-01-01

    Objectives: Technologies in health care are evolving quickly, with new findings in the area of biotechnological and genetic research being published regularly. A health technology assessment (HTA) is often used to answer the question of whether the new technology should be implemented into clinical

  18. A critical assessment of fuel cell technology

    International Nuclear Information System (INIS)

    Lindstroem, O.

    1994-01-01

    Cold combustion is a promised technology to mankind since the middle of the last century. The fuel cell may at last become the energy machine of the one to come after a long journey on a road bordered with expectations, successes and disappointments. Ten billion people will need the cell for their well-being. The progress and the state-of-art is assessed by means of figures of merit for performance, normalized to standard conditions, life and variability. State-of-art current densities for multi-kW stacks operating on atmospheric pressure air at 0.74 V cell voltage (50% efficiency, HHV) are estimated to be 150 mA/cm 2 for MCFC, 160 mA/cm 2 for AFC, 239 mA/cm 2 for PEFC and 270 mA/cm 2 for SOFC. PAFC gives 260 mA/cm 2 at 0.66 V and DMFC 100 mA/cm 2 at 0.37 V. Decay rates are about 1%/1000 h for PEFC, PAFC and SOFC compared to 2%/1000 h for AFC and 3%/1000 h for MCFC. Coefficients of variation for cell voltages amount to about 1% for all options, except for MCFC with 3-4%. Improvement of cell performance after 1975 is nil to moderate, except for SOFC with a consistent annual improvement of about 10%. There is room for further development of terrestrial AFCs towards 300-400 mA/cm 2 considering the figure 800 mA/cm 2 for oxygen AFCs. Life and cost will decide the future of the fuel cell. Prospects are not as good as they could be. The fuel cell community lacks understanding of the basics of fuel processing, as demonstrated by the widespread misbelief ('the CO 2 syndrome') that CO 2 cannot be removed cost effectively from a hydrogen feed (which is practiced in every NH 3 plant around the world). The competition, read the gas turbine, has to be taken very seriously. Emphasis has to be shifted from premature demonstrations to R and D on fundamental problems, which have been around too long. 34 refs

  19. System of Systems Technology Readiness Assessment

    National Research Council Canada - National Science Library

    Majumdar, WindyJoy S

    2007-01-01

    ...). In many cases, advanced technologies must be matured simultaneously by multiple systems to support the degree of interoperability and/or integration required Current DoD guidance with respect...

  20. Assessment of technology generating institutions in biotechnology ...

    African Journals Online (AJOL)

    STORAGESEVER

    2009-05-18

    May 18, 2009 ... Key words: Biotechnology, innovation system, research institutions, universities and agricultural development programme. INTRODUCTION ... technology is the application of indigenous and / or scientific knowledge to the .... professionals, public attitude to genetic engineering organisms and products, and ...

  1. How to measure technology assessment: an introduction

    NARCIS (Netherlands)

    Hasman, Arie

    2014-01-01

    This contribution introduces the Technology Acceptance model. Since information systems are still underutilized, application of models of user acceptance can provide important clues about what can be done to increase system usage

  2. Innovative Technologies for Global Space Exploration

    Science.gov (United States)

    Hay, Jason; Gresham, Elaine; Mullins, Carie; Graham, Rachael; Williams-Byrd; Reeves, John D.

    2012-01-01

    Under the direction of NASA's Exploration Systems Mission Directorate (ESMD), Directorate Integration Office (DIO), The Tauri Group with NASA's Technology Assessment and Integration Team (TAIT) completed several studies and white papers that identify novel technologies for human exploration. These studies provide technical inputs to space exploration roadmaps, identify potential organizations for exploration partnerships, and detail crosscutting technologies that may meet some of NASA's critical needs. These studies are supported by a relational database of more than 400 externally funded technologies relevant to current exploration challenges. The identified technologies can be integrated into existing and developing roadmaps to leverage external resources, thereby reducing the cost of space exploration. This approach to identifying potential spin-in technologies and partnerships could apply to other national space programs, as well as international and multi-government activities. This paper highlights innovative technologies and potential partnerships from economic sectors that historically are less connected to space exploration. It includes breakthrough concepts that could have a significant impact on space exploration and discusses the role of breakthrough concepts in technology planning. Technologies and partnerships are from NASA's Technology Horizons and Technology Frontiers game-changing and breakthrough technology reports as well as the External Government Technology Dataset, briefly described in the paper. The paper highlights example novel technologies that could be spun-in from government and commercial sources, including virtual worlds, synthetic biology, and human augmentation. It will consider how these technologies can impact space exploration and will discuss ongoing activities for planning and preparing them.

  3. A roadmap to the realization of fusion energy

    International Nuclear Information System (INIS)

    Romanelli, Francesco

    2013-01-01

    With the reduction of CO2 emissions driving future energy policy, fusion can start market penetration beyond 2050 with up to 30% of electricity production by 2100. This requires an ambitious, yet realistic roadmap towards the demonstration of electricity production by 2050. This talk describes the main technical challenges on the path to fusion energy. For all of the challenges candidate solutions have been developed and the goal of the programme is now to demonstrate that they will also work at the scale of reactor. The roadmap has been developed within a goal-oriented approach articulated in eight different Missions. For each Mission the critical aspects for reactor application, the risks and risk mitigation strategies, the level of readiness now and after ITER and the gaps in the programme have been examined with involvement of experts from the ITER International Organization, Fusion for Energy, EFDA Close Support Unites and EFDA Associates. High-level work packages for the roadmap implementation have been prepared and the resources evaluated. ITER is the key facility in the roadmap and its success represents the most important overarching objectives of the EU programme. A demonstration fusion power plant (DEMO), producing net electricity for the grid at the level of a few hundreds MW is foreseen to start operation in the early 2040s. Following ITER, it will be the single step to a commercial fusion power plant. Industry must be involved early in the DEMO definition and design. The evolution of the programme requires that industry progressively shifts its role from that of provider of high-tech components to that of driver of the fusion development. Industry must be able to take full responsibility for the commercial fusion power plant after successful DEMO operation. For this reason, DEMO cannot be defined and designed by research laboratories alone, but requires the full involvement of industry in all technological and systems aspects of the design. Europe

  4. How to make participatory technology assessment in agriculture more 'participatory'

    DEFF Research Database (Denmark)

    Tavella, Elena

    2016-01-01

    the cultivation of new GM plants in Denmark. Furthermore, through this illustration, the term Participatory Technology Assessment (PTA) is redefined, thereby suggesting two additional aspects to assessing new technologies – following and evaluating policy making – to be considered in the conduct of PTA....

  5. Participatory Technology and Constraints Assessment to Improve ...

    African Journals Online (AJOL)

    Beekeeping is a long-standing practice in the rural communities of Ethiopia and appears as ancient history of the country. A three–part assessment and diagnostic study (Livelihood systems assessment, integrated honeybee management needs assessment and diagnostic survey) was undertaken from 2006-2008 in Tigray, ...

  6. Food for thought ... A toxicology ontology roadmap.

    Science.gov (United States)

    Hardy, Barry; Apic, Gordana; Carthew, Philip; Clark, Dominic; Cook, David; Dix, Ian; Escher, Sylvia; Hastings, Janna; Heard, David J; Jeliazkova, Nina; Judson, Philip; Matis-Mitchell, Sherri; Mitic, Dragana; Myatt, Glenn; Shah, Imran; Spjuth, Ola; Tcheremenskaia, Olga; Toldo, Luca; Watson, David; White, Andrew; Yang, Chihae

    2012-01-01

    Foreign substances can have a dramatic and unpredictable adverse effect on human health. In the development of new therapeutic agents, it is essential that the potential adverse effects of all candidates be identified as early as possible. The field of predictive toxicology strives to profile the potential for adverse effects of novel chemical substances before they occur, both with traditional in vivo experimental approaches and increasingly through the development of in vitro and computational methods which can supplement and reduce the need for animal testing. To be maximally effective, the field needs access to the largest possible knowledge base of previous toxicology findings, and such results need to be made available in such a fashion so as to be interoperable, comparable, and compatible with standard toolkits. This necessitates the development of open, public, computable, and standardized toxicology vocabularies and ontologies so as to support the applications required by in silico, in vitro, and in vivo toxicology methods and related analysis and reporting activities. Such ontology development will support data management, model building, integrated analysis, validation and reporting, including regulatory reporting and alternative testing submission requirements as required by guidelines such as the REACH legislation, leading to new scientific advances in a mechanistically-based predictive toxicology. Numerous existing ontology and standards initiatives can contribute to the creation of a toxicology ontology supporting the needs of predictive toxicology and risk assessment. Additionally, new ontologies are needed to satisfy practical use cases and scenarios where gaps currently exist. Developing and integrating these resources will require a well-coordinated and sustained effort across numerous stakeholders engaged in a public-private partnership. In this communication, we set out a roadmap for the development of an integrated toxicology ontology

  7. Design and technology assessment of three lunar habitat concepts

    Science.gov (United States)

    Hypes, Warren D.; Wright, Robert L.; Gould, Marston J.

    1992-01-01

    Three manned lunar habitat concepts, designed to support a crew of four for 28-30 days, are presented. Two concepts are based on Space Station Freedom structural elements and the third uses an earlier expandable-module-technology base. Technology readiness criteria, developed for assessing NASA sponsored developments, are applied to technology development needs for each concept to estimate the present level of technology readiness.

  8. Energy Road-map 2050: Towards regional and local energy Road-maps. IMAGINE seminar 2011

    International Nuclear Information System (INIS)

    Maillot, Herve; Pidoux, Blandine

    2011-11-01

    The 2011 IMAGINE Seminar held in Brussels on 9 November 2011 united around fifty representatives from Energy Cities network member cities as well as representatives from the European Parliament and the Commission, various industrial sectors and civil society organisations. Participants were invited to share their visions of their action by 2040-2050 in a sustainable and desirable city, having achieved its energy transition. The spontaneous and inspiring discussions that followed broached the following questions: - What is and should be the role of the local level in the EU Energy Road-map? - What if European local authorities were to develop their own 'Energy 2050' Road-maps? - What local and regional policies can social and economic players use for contributing to achieving European targets? - Under what conditions is the 'low energy cities with a high quality of life for all' concept relevant? The debate helped outline a shared, global vision as a step towards European collective dynamics giving territories a major role in energy transition. At the end of the day, participants from very different backgrounds converged on the following key points: - Like European institutions, territories must develop a long-term vision, failing which they will be unable to take meaningful action, mobilise players and make the right decisions in the short-term. - The energy-territory relationship, from efficient energy use to supply policies, is a major democratic challenge. - Although a number of technologies are already available, they still have to be integrated so that citizens can satisfy their needs and become fully accountable for their energy use. - Energy strategies must help meet a number of local challenges: social and territorial cohesion, employment and economic development, environmental protection and quality of life. To do so, they need to be designed taking those they are supposed to serve, i.e. citizens, into consideration. - The interaction

  9. A Comparative Study of Probabilistic Roadmap Planners

    NARCIS (Netherlands)

    Geraerts, R.J.; Overmars, M.H.

    2004-01-01

    The probabilistic roadmap approach is one of the leading motion planning techniques. Over the past eight years the technique has been studied by many different researchers. This has led to a large number of variants of the approach, each with its own merits. It is difficult to compare the different

  10. SCENET roadmap for superconductor digital electronics

    NARCIS (Netherlands)

    ter Brake, Hermanus J.M.; Buchholz, F.-Im.; Burnell, G.; Claeson, T.; Crete, D.; Febvre, P.; Gerritsma, G.J.; Hilgenkamp, Johannes W.M.; ............, [Unknown; Rogalla, Horst

    2006-01-01

    The roadmap gives an overview on status and future developments in Superconducting Digital Electronics (SDE). Key areas in SDE under focus are applications, circuit simulation and design, circuit fabrication, interfacing and testing, cooling and system aspects, and new devices and materials. Care

  11. Gaussian sampling for probabilistic roadmap planners

    NARCIS (Netherlands)

    Boor, V.; Overmars, M.H.; Stappen, A.F. van der

    2001-01-01

    Probabilistic roadmap planners (PRMs) have become a popular technique for motion planning that has shown great potential. A critical aspect of a PRM is the probabilistic strategy used to sample the free configuration space. In this paper we present a new, simple sampling strategy, which we call

  12. Roadmapping towards Sustainability Proficiency in Engineering Education

    Science.gov (United States)

    Rodriguez-Andara, Alejandro; Río-Belver, Rosa María; Rodríguez-Salvador, Marisela; Lezama-Nicolás, René

    2018-01-01

    Purpose: The purpose of this paper is to deliver a roadmap that displays pathways to develop sustainability skills in the engineering curricula. Design/methodology/approach: The selected approach to enrich engineering students with sustainability skills was active learning methodologies. First, a survey was carried out on a sample of 189 students…

  13. A European Roadmap for Research in Astrobiology - The AstRoMap Roadmap

    Science.gov (United States)

    Gómez, F.; Walter, N.; Horneck, G.; Muller, C.; Rettberg, P.; Capria, M.; Palomba, E.

    2015-10-01

    AstRoMap (Astrobiology Road Mapping activity-www.astromap-eu.org) is a collaborative project which will provide the European Planetary Science Community with a road map in astrobiology. The goals of the project have been: (i) to pose big questions related to astrobiology; and (ii) the identification of experiments, new technology and/or those space missions to be developed in future programs and which could answer those big questions. This collaborative infrastructure includes the organization of expert panels and international workshops in order to discuss about those big questions and the science objectives by the community to be addressed. The main deliverable will be a Roadmap document. The project is steered by a consortium of six European and national research institutes and associations: -­- Centro de Astrobiologica (INTACSIC), Spain -­- European Science Foundation, France -­- Association pour un Réseau Européen d'Exo/Astrobiology (EANA), France -­- B-USOC, Belgium -­- Deutsches Zentrum für Luft- und Raumfahrt (DLR), Germany -­- National Institute for Astrophysics (INAF), ItalyOrigin and evolution of planetary systems -­- Origin of organic compounds in space -­- Rock-water-carbon interactions, organic synthesis, and steps to life -­- Life and habitability on Earth and in Space -­- -­- Biosignatures as facilitating life detection The key topics will focus on a limited number of strategic scientific objectives to be addressed in the next 20 years by European astrobiologists, and suggest research activities for future development.

  14. SQUIDs in biomagnetism: a roadmap towards improved healthcare

    Science.gov (United States)

    Körber, Rainer; Storm, Jan-Hendrik; Seton, Hugh; Mäkelä, Jyrki P.; Paetau, Ritva; Parkkonen, Lauri; Pfeiffer, Christoph; Riaz, Bushra; Schneiderman, Justin F.; Dong, Hui; Hwang, Seong-min; You, Lixing; Inglis, Ben; Clarke, John; Espy, Michelle A.; Ilmoniemi, Risto J.; Magnelind, Per E.; Matlashov, Andrei N.; Nieminen, Jaakko O.; Volegov, Petr L.; Zevenhoven, Koos C. J.; Höfner, Nora; Burghoff, Martin; Enpuku, Keiji; Yang, S. Y.; Chieh, Jen-Jei; Knuutila, Jukka; Laine, Petteri; Nenonen, Jukka

    2016-11-01

    to its corresponding antigen, if it is present. Any resulting changes in the properties of the nanoparticles are detected with a SQUID. For liquid-phase detection, there are three basic methods: AC susceptibility, magnetic relaxation and remanence measurement. These methods, which have been successfully implemented for both in vivo and ex vivo applications, are highly sensitive and, although further development is required, it appears highly likely that at least some of them will be commercialized. Chapter 8 concludes the roadmap with an assessment of the commercial market for MEG systems. Despite the huge advances that have been realized since MEG was first introduced, the number of commercial systems deployed around the world remains small, around 250 units employing about 50 000 SQUIDs. The slow adoption of this technology is undoubtedly in part due to the high cost, not least because of the need to surround the entire system in an expensive magnetically shielded room. Nonetheless, the recent introduction of automatically refilling liquid-helium systems, the ongoing reduction in sensor noise, the potential availability of high-T c SQUID systems, the availability of new and better software and the combination of MEG with ULF MRI all have the potential to increase the market size in the not-so-distant future. In particular, there is a great and growing need for better noninvasive technologies to measure brain function. There are hundreds of millions of people in the world who suffer from brain disorders such as epilepsy, stroke, dementia or depression. The enormous cost to society of these diseases can be reduced by earlier and more accurate detection and diagnosis. Once the challenges outlined in this roadmap have been met and the outstanding problems have been solved, the potential demand for SQUID-based health technology can be expected to increase by ten- if not hundred-fold.

  15. Roadmap for biofertilizer development project at Malaysian Nuclear Agency

    International Nuclear Information System (INIS)

    Khairuddin Abdul Rahim; Ahmad Nazrul Abd Wahid; Phua Choo Kwai Hoe; Pauline Liew Woan Ying; Ahamad Sahali Mardi; Mat Rasol Awang

    2007-01-01

    This paper discusses the roadmap for the Biofertilizer Development Project conducted at the Malaysian Nuclear Agency (Nuclear Malaysia). The project started in 2003 and scheduled to end in 2008. Biofertilizer refers to living microorganisms or materials that contain living microorganisms that contributes to improvement in plant nutrition, soil fertility and crop productivity. The main components of the project are (a) biofertilizer substrate or carrier development, (b) biofertilizer inoculum development based on local indigenous microorganisms (c) biofertilizer product formulation and innovation, and (d) evaluation of efficiency of biofertilizer products on crops under different cropping systems, including under modern agriculture under soilless system. The above components may involve nuclear technology, viz, use of ionising radiation and the use of isotopic tracers. The paper also discusses local and international linkages, including with Forum for Nuclear Cooperation in Asia (FNCA) and the industry, and aspects of commercialisation and technology transfer. (Author)

  16. Nonproliferation criteria for assessing civilian nuclear technologies

    International Nuclear Information System (INIS)

    Rowen, H.S.

    1980-01-01

    Two trends are affecting the spread of nuclear weapons. One is the growing access to readily fissionable materials as a by-product of the spread of civilian nuclear technology. The second is the fact that many countries acquiring easier access also have an increased incentive to acquire nuclear explosives, or at least to shorten the lead time to them. Nonproliferation strategies might seek to influence the demand for nuclear explosives through improved alliance ties, regional security associations, and nuclear free zones, as well as the ease of access to explosives through agreement on increasing the difficulty of each access through changes in international agreements on technologies, or through a mix of such measures. The discussion focuses on a supply-oriented strategy, not because such a strategy by itself is likely to be optimal, but because it would be a significant component of a broad strategy, and it is the one that has been central to the nonproliferation efforts of the United States in the past several years. A supply-oriented strategy could have two components: 1. A set of incentives for choosing less dangerous nuclear systems instead of more dangerous ones (and in some cases the choosing of non-nuclear rather than nuclear technologies); 2. A set of political agreements restricting especially dangerous systems or components of systems. For such a strategy to have a prospect of being effective, it should encompass all the paths to a bomb from a legitimate safeguarded state. Specifically, it should include: 1. Paths starting from large plutonium reactors, including those labeled research reactors; 2. Isotope separation technologies; 3. Power-reactors-related paths, based on using either a. Material available at the front end, or b. Material available at the back end; and 4 Various possible future technologies, such as accelerator breeders or fusion-fission technology. Some illustrative cases are discussed

  17. Review on early technology assessments of nanotechnologies in oncology.

    Science.gov (United States)

    Retèl, Valesca P; Hummel, Marjan J M; van Harten, Wim H

    2009-12-01

    Nanotechnology is expected to play an increasingly important role in the diagnostics, prognostics, and management of targeted cancer treatments. While papers have described promising results for nanotechnology in experimental settings, the translation of fundamental research into clinical applications has yet to be widely adopted. In future, policy makers will need to anticipate new developments for clinical implementation and introduce technology assessments. Here we present an overview of the literature on the technology assessments that have already been undertaken on early stage nanotechnology in cancer care, with particular emphasis placed on clinical efficacy, efficiency, logistics, patient-related features and technology dynamics. Owing to the current stage of development of most nanotechnologies, we found only a limited number of publications describing the application of either Health Technology Assessment (HTA) or Constructive Technology Assessment (CTA). In spite of the promising conclusions of most papers concerning the benefits of clinical implementation, actual clinically relevant applications were rarely encountered, and so far only a few publications report application of systematic forms of technology assessment. Most articles consider aspects of environmental safety, regulation and ethics, often mentioning the need to investigate such issues more thoroughly. Evaluation of financial and organizational aspects is often missing. In order to obtain a realistic perspective on the translation and implementation process there is a need for a broad and systematic evaluation of nanotechnologies at early stages of development. Assessment methods taking technology dynamics into account, such as Constructive Technology Assessment (CTA) should be considered for evaluation purposes.

  18. Technology development risk assessment and mixed interests

    International Nuclear Information System (INIS)

    Borrelli, G.; Sartori, S.

    1992-05-01

    The main purpose of this work is to demonstrate by means of a critical analysis of the state-of-the-art in technological and environmental risk analysis and decision making, that risk and environmental management decisions involve heterogeneous groups of social actors, each representing conflicting interests. It is argued that risk analyses should therefore be based on social interaction and communication paradigma, as well as, on a new rational way of thinking concerning the optimum choice of suitable technological development strategies leading towards a publicly acceptable balance between national energy-economic strategic necessities and social and individual perception of risk

  19. Innovative and Alternative Technology Assessment Manual

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-02-01

    This four chapter, six appendix manual presents the procedures and methodology as well as the baseline costs and energy information necessary for the analysis and evaluation of innovative and alternative technology applications submitted for federal grant assistance under the innovative and alternative technology provisions of the Clean Water Act of 1977. The manual clarifies and interprets the intent of Congress and the Environmental Protection Agency in carrying out the mandates of the innovative and alternative provisions of the Clean Water Act of 1977. [DJE 2005

  20. Swedish Technology Teachers' Views on Assessing Student Understandings of Technological Systems

    Science.gov (United States)

    Schooner, Patrick; Klasander, Claes; Hallström, Jonas

    2018-01-01

    Technology education is a new school subject in comparison with other subjects within the Swedish compulsory school system. Research in technology education shows that technology teachers lack experience of and support for assessment in comparison with the long-term experiences that other teachers use in their subjects. This becomes especially…

  1. Technology assessment and technology policy in Europe : New concepts, new goals, new infrastructures

    NARCIS (Netherlands)

    Smits, R.; Leyten, J.; Hertog, P. den

    1995-01-01

    Starting from the observation that the technological potentials are underutilized in economic and in social tems, this article raises the question of what role technology assessment (TA) can play in technology policy to address this problem. The causes of the problem of underutilization are analyzed

  2. Technology and democracy. Vol. 2. The use and impact of technology assessment in Europe

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-31

    A major theme of the Third European Congress on Technology assessment, ``Technology and Democracy`` was related to the question of how technology assessment may assist in the creation of a better foundation for decision-making when new technologies are introduced. The discussion, which involved politicians, researchers and representatives from industry, trade unions and various interest groups, focussed on how technology assessment can facilitate the creation of a dialogue between the parties involved in the decision-making processes. The Congress concluded in general, that as a result of the increasing complexity of our societies, the need for technology assessment to create the necessary multidimensional foundation for decision-making becomes more and more urgent. Such decisions will choose technologies with built-in opportunities and reduced risk factors. It was stated that ordinary people, if adequately informed, are able to form opinions on this. The involvement of citizens and the opening of a democratic debate put limits on the use of technology and heightens its acceptability, which results in an improvement of its quality and productivity. Technology assessment cases from all over Europe were presented. The workshop conclusions are included in Volume I. Volume II includes the papers form the Post-Congress workshop, ``Methods in Technology Assessment and Decision-making`` and the conclusions from the Post-Congress Workshop. (AB)

  3. Technology and democracy. Vol. 1. The use and impact of technology assessment in Europe

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-31

    A major theme of the Third European Congress on Technology Assessment, ``Technology and Democracy`` was related to the question of how technology assessment may assist in the creation of a better foundation for decision-making when new technologies are introduced. The discussion, which involved politicians, researchers and representatives from industry, trade unions and various interest groups, focussed on how technology assessment can facilitate the creation of a dialogue between the parties involved in the decision-making processes. The Congress concluded in general, that as a result of the increasing complexity of our societies, the need for technology assessment to create the necessary multidimensional foundation for decision-making becomes more and more urgent. Such decisions will chose technologies with built-in opportunities and reduced risk factors. It was stated, that ordinary people, if adequately informed, are able to form opinions on this. The involvement of citizens and the opening of a democratic debate put limits on the use of technology and heightens its acceptability, which result, in an improvement of its quality and productivity. Technology assessment cases from all over Europe were presented. The workshop conclusions are included in Volume I. Volume II includes the papers from the Post-Congress workshop, ``Methods in Technology Assessment and Decision-Making`` and the conclusions from the Post-Congress workshop. (AB)

  4. Assessment of University- Industry Collaboration and Technology ...

    African Journals Online (AJOL)

    Despite the cultural differences between university and industry, the mutual benefits from collaboration between university and industry have long been recognized in the advanced countries. Recently, the issue of technology transfer and collaboration between universities and industries has been receiving attention in the ...

  5. assessment of university- industry collaboration and technology ...

    African Journals Online (AJOL)

    ES Obe

    2013-07-02

    Jul 2, 2013 ... and ecommerce [3]. Technology transfer between industry and university come in different ways such as direct hires of students, graduates, temporary exchanges of researchers, university/faculty consultancies, joint research involving industry and academic scientists and engineers, industry-sponsored.

  6. Assessing information and communication technology in surgical ...

    African Journals Online (AJOL)

    2012-08-03

    Aug 3, 2012 ... c Federal Ministry of Health. Introduction. The Internet has enabled increasing numbers of healthcare professionals to access flexible, convenient and interactive forms of continuing medical education. The advantages of these computer-based technology tools are clear but they are expensive, may not be ...

  7. An ESA roadmap for geobiology in space exploration

    Science.gov (United States)

    Cousins, Claire R.; Cockell, Charles S.

    2016-01-01

    Geobiology, and in particular mineral-microbe interactions, has a significant role to play in current and future space exploration. This includes the search for biosignatures in extraterrestrial environments, and the human exploration of space. Microorganisms can be exploited to advance such exploration, such as through biomining, maintenance of life-support systems, and testing of life-detection instrumentation. In view of these potential applications, a European Space Agency (ESA) Topical Team "Geobiology in Space Exploration" was developed to explore these applications, and identify research avenues to be investigated to support this endeavour. Through community workshops, a roadmap was produced, with which to define future research directions via a set of 15 recommendations spanning three key areas: Science, Technology, and Community. These roadmap recommendations identify the need for research into: (1) new terrestrial space-analogue environments; (2) community level microbial-mineral interactions; (3) response of biofilms to the space environment; (4) enzymatic and biochemical mineral interaction; (5) technical refinement of instrumentation for space-based microbiology experiments, including precursor flight tests; (6) integration of existing ground-based planetary simulation facilities; (7) integration of fieldsite biogeography with laboratory- and field-based research; (8) modification of existing planetary instruments for new geobiological investigations; (9) development of in situ sample preparation techniques; (10) miniaturisation of existing analytical methods, such as DNA sequencing technology; (11) new sensor technology to analyse chemical interaction in small volume samples; (12) development of reusable Lunar and Near Earth Object experimental platforms; (13) utility of Earth-based research to enable the realistic pursuit of extraterrestrial biosignatures; (14) terrestrial benefits and technological spin-off from existing and future space

  8. Used fuel disposition research and development roadmap - FY10 status.

    Energy Technology Data Exchange (ETDEWEB)

    Nutt, W. M. (Nuclear Engineering Division)

    2010-10-01

    Since 1987 the U.S. has focused research and development activities relevant to the disposal of commercial used nuclear fuel and U.S. Department of Energy (DOE) owned spent nuclear fuel and high level waste on the proposed repository at Yucca Mountain, Nevada. At the same time, the U.S. successfully deployed a deep geologic disposal facility for defense-related transuranic waste in bedded salt at the Waste Isolation Pilot Plant. In 2009 the DOE established the Used Fuel Disposition Campaign (UFDC) within the Office of Nuclear Energy. The Mission of the UFDC is to identify alternatives and conduct scientific research and technology development to enable storage, transportation and disposal of used nuclear fuel and wastes generated by existing and future nuclear fuel cycles. The U.S. national laboratories have participated on these programs and has conducted research and development related to these issues to a limited extent. However, a comprehensive research and development (R&D) program investigating a variety of geologic media has not been a part of the U.S. waste management program since the mid 1980s. Such a comprehensive R&D program is being developed in the UFDC with a goal of meeting the UFDC Grand Challenge to provide a sound technical basis for absolute confidence in the safety and security of long-term storage, transportation, and disposal of used nuclear fuel and wastes from the nuclear energy enterprise. The DOE has decided to no longer pursue the development of a repository at Yucca Mountain, Nevada. Since a repository site will ultimately have to be selected, sited, characterized, designed, and licensed, other disposal options must now be considered. In addition to the unsaturated volcanic tuff evaluated at Yucca Mountain, several different geologic media are under investigation internationally and preliminary assessments indicate that disposal of used nuclear fuel and high level waste in these media is feasible. Considerable progress has been made in

  9. 20 Years of Technology and Language Assessment in "Language Learning & Technology"

    Science.gov (United States)

    Chapelle, Carol A.; Voss, Erik

    2016-01-01

    This review article provides an analysis of the research from the last two decades on the theme of technology and second language assessment. Based on an examination of the assessment scholarship published in "Language Learning & Technology" since its launch in 1997, we analyzed the review articles, research articles, book reviews,…

  10. Superconducting Technology Assessment (NSA, Office of Corporate Assessments)

    Data.gov (United States)

    Networking and Information Technology Research and Development, Executive Office of the President — The government, and particularly NSA, has a continuing need for ever-increasing computational power. The Agency is concerned about projected limitations of...

  11. Vision 2020: 2000 Separations Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Adler, Stephen [Center for Waster Reduction Technologies; Beaver, Earl [Practical Sustainability; Bryan, Paul [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Robinson, Sharon [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Watson, Jack [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2000-01-01

    This report documents the results of four workshops on the technology barriers, research needs, and priorities of the chemical, agricultural, petroleum, and pharmaceutical industries as they relate to separation technologies utilizing adsorbents, crystallization, distillation, extraction, membranes, separative reactors, ion exchange, bioseparations, and dilute solutions.

  12. Hydrogen Delivery Technical Team Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-06-01

    The mission of the Hydrogen Delivery Technical Team (HDTT) is to enable the development of hydrogen delivery technologies, which will allow for fuel cell competitiveness with gasoline and hybrid technologies by achieving an as-produced, delivered, and dispensed hydrogen cost of $2-$4 per gallon of gasoline equivalent of hydrogen.

  13. Quadrennial Technology Review 2015: Technology Assessments--Wind Power

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2015-10-07

    Wind power has become a mainstream power source in the U.S. electricity portfolio, supplying 4.9% of the nation’s electricity demand in 2014. With more than 65 GW installed across 39 states at the end of 2014, utility-scale wind power is a cost-effective source of low-emissions power generation throughout much of the nation. The United States has significant sustainable land-based and offshore wind resource potential, greater than 10 times current total U.S. electricity consumption. A technical wind resource assessment conducted by the Department of Energy (DOE) in 2009 estimated that the land-based wind energy potential for the contiguous United States is equivalent to 10,500 GW capacity at 80 meters (m) hub and 12,000 GW capacity at 100 meters (m) hub heights, assuming a capacity factor of at least 30%. A subsequent 2010 DOE report estimated the technical offshore wind energy potential to be 4,150 GW. The estimate was calculated from the total offshore area within 50 nautical miles of shore in areas where average annual wind speeds are at least 7 m per second at a hub height of 90 m.

  14. Radioactive scrap metal decontamination technology assessment report

    International Nuclear Information System (INIS)

    Buckentin, J.M.; Damkroger, B.K.; Schlienger, M.E.

    1996-04-01

    Within the DOE complex there exists a tremendous quantity of radioactive scrap metal. As an example, it is estimated that within the gaseous diffusion plants there exists in excess of 700,000 tons of contaminated stainless steel. At present, valuable material is being disposed of when it could be converted into a high quality product. Liquid metal processing represents a true recycling opportunity for this material. By applying the primary production processes towards the material's decontamination and re-use, the value of the strategic resource is maintained while drastically reducing the volume of material in need of burial. Potential processes for the liquid metal decontamination of radioactively contaminated metal are discussed and contrasted. Opportunities and technology development issues are identified and discussed. The processes compared are: surface decontamination; size reduction, packaging and burial; melting technologies; electric arc melting; plasma arc centrifugal treatment; air induction melting; vacuum induction melting; and vacuum induction melting and electroslag remelting

  15. Proliferation resistant technology assessment. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Bandtel, K.C.; Chilton, P.D.; Daugherty, W.L.; McDonnel, J.L.

    1980-06-01

    The study investigates the incidental contribution to latent proliferation by the various elements of the peaceful nuclear power fuel cycle. The objective of the study was to develop a quantitative measure of this contribution. General proliferation issues were not studied. Two different procedures are used. The first makes use of the Bechtel Energy Supply Planning Model (ESPM) cost data base for energy facilities and yielded quantitative results in terms of dollar-related comparative values. The second procedure relied primarily on economic data from the United Nations International Standard Industrial Codes which was interpreted, based on a technical consideration of nuclear fuel cycle and nuclear weapons technology. The ESPM cost data was accepted in toto and used to illustrate the methodology. Not all cost items (e.g., purchase of expensive fabricated products needed for the operation and maintenance of a given facility) have any relationship to the technology transfer from the given facility.

  16. Rapid Technology Assessment Framework for Land Logistics

    Science.gov (United States)

    2015-03-01

    WHO) • Communication and education efforts would become very important 9. Major geological/meteorolo gical event4 Not scored • Immediate loss of...techniques. A good overview of the epistemological underpinnings and general-level discussion of futurist works is provided by Inayatullah [23]. A...40] • Falling costs and barriers to technological innovation and reverse-engineering [4, 40] • Reduced investment in education , S&T and R&D in

  17. Technology assessments in transportation: survey of recent literature

    Energy Technology Data Exchange (ETDEWEB)

    LaBelle, S.J.

    1980-03-01

    A survey and an evaluation of recent studies of transportation systems done in a technology-assessment framework were undertaken as the basis for a detailed statement of work for a US Department of Energy technology assessment of transportation energy-conservation strategies. Several bibliographies were searched and numerous professionals in the field of technology assessment were contacted regarding current work. Detailed abstracts were prepared for studies judged to be sufficiently broad in coverage of impacts assessed, yet detailed in coverage of all or part of the nation's transportation systems. Some studies were rich in data but not comprehensive in their analytical approach; brief abstracts were prepared for these. An explanation of the criteria used to screen the studies, as well as abstracts of 37 reports, are provided in this compendium of transportation-technology-assessment literature.

  18. GIS Technology: Resource and Habitability Assessment Tool

    Data.gov (United States)

    National Aeronautics and Space Administration — We are applying Geographic Information Systems (GIS) to new orbital data sets for lunar resource assessment and the identification of past habitable environments on...

  19. Scientific method, adversarial system, and technology assessment

    Science.gov (United States)

    Mayo, L. H.

    1975-01-01

    A basic framework is provided for the consideration of the purposes and techniques of scientific method and adversarial systems. Similarities and differences in these two techniques of inquiry are considered with reference to their relevance in the performance of assessments.

  20. European Hydrogen Energy Road-map (HyWays) - First Results from Simulation, Stakeholder Discussion and Evaluation

    International Nuclear Information System (INIS)

    Reinhold Wurster; Ulrich Bunger; Jean-Marc Agator; Martin Wietschel; Harm Jeeninga

    2006-01-01

    HyWays is an integrated project, co-funded by research institutes, industry, national agencies and by the European Commission under the 6. Framework Programme. HyWays aims to develop a validated and well accepted Road-map for the introduction of hydrogen in the European energy system. The main characteristic of this Road-map is that it reflects real life conditions by taking into account not only technological but also country specific institutional, geographic and socio/economic barriers and opportunities. Both stationary and mobile applications are addressed, including possible synergies ('spill over effects') between these applications. HyWays will systematically describe the future steps to be taken for large-scale introduction of hydrogen as an energy carrier in the power market and transport sector and as a storage medium for renewable energy. An Action Plan for the support of the introduction of hydrogen technologies will be derived from this Road-map. (authors)

  1. A Roadmap for NEAMS Capability Transfer

    Energy Technology Data Exchange (ETDEWEB)

    Bernholdt, David E [ORNL

    2011-11-01

    The vision of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program is to bring truly predictive modeling and simulation (M&S) capabilities to the nuclear engineering community in order to enable a new approach to the design and analysis of nuclear energy systems. From its inception, the NEAMS program has always envisioned a broad user base for its software and scientific products, including researchers within the DOE complex, nuclear industry technology developers and vendors, and operators. However activities to date have focused almost exclusively on interactions with NEAMS sponsors, who are also near-term users of NEAMS technologies. The task of the NEAMS Capability Transfer (CT) program element for FY2011 is to develop a comprehensive plan to support the program's needs for user outreach and technology transfer. In order to obtain community input to this plan, a 'NEAMS Capability Transfer Roadmapping Workshop' was held 4-5 April 2011 in Chattanooga, TN, and is summarized in this report. The 30 workshop participants represented the NEAMS program, the DOE and industrial user communities, and several outside programs. The workshop included a series of presentations providing an overview of the NEAMS program and presentations on the user outreach and technology transfer experiences of (1) The Advanced Simulation and Computing (ASC) program, (2) The Standardized Computer Analysis for Licensing Evaluation (SCALE) project, and (3) The Consortium for Advanced Simulation of Light Water Reactors (CASL), followed by discussion sessions. Based on the workshop and other discussions throughout the year, we make a number of recommendations of key areas for the NEAMS program to develop the user outreach and technology transfer activities: (1) Engage not only DOE, but also industrial users sooner and more often; (2) Engage with the Nuclear Regulatory Commission to facilitate their understanding and acceptance of NEAMS approach to predictive M&S; (3

  2. Defining the "proven technology" technical criterion in the reactor technology assessment for Malaysia's nuclear power program

    Science.gov (United States)

    Anuar, Nuraslinda; Kahar, Wan Shakirah Wan Abdul; Manan, Jamal Abdul Nasir Abd

    2015-04-01

    Developing countries that are considering the deployment of nuclear power plants (NPPs) in the near future need to perform reactor technology assessment (RTA) in order to select the most suitable reactor design. The International Atomic Energy Agency (IAEA) reported in the Common User Considerations (CUC) document that "proven technology" is one of the most important technical criteria for newcomer countries in performing the RTA. The qualitative description of five desired features for "proven technology" is relatively broad and only provides a general guideline to its characterization. This paper proposes a methodology to define the "proven technology" term according to a specific country's requirements using a three-stage evaluation process. The first evaluation stage screens the available technologies in the market against a predefined minimum Technology Readiness Level (TRL) derived as a condition based on national needs and policy objectives. The result is a list of technology options, which are then assessed in the second evaluation stage against quantitative definitions of CUC desired features for proven technology. The potential technology candidates produced from this evaluation is further narrowed down to obtain a list of proven technology candidates by assessing them against selected risk criteria and the established maximum allowable total score using a scoring matrix. The outcome of this methodology is the proven technology candidates selected using an accurate definition of "proven technology" that fulfills the policy objectives, national needs and risk, and country-specific CUC desired features of the country that performs this assessment. A simplified assessment for Malaysia is carried out to demonstrate and suggest the use of the proposed methodology. In this exercise, ABWR, AP1000, APR1400 and EPR designs assumed the top-ranks of proven technology candidates according to Malaysia's definition of "proven technology".

  3. Health technology assessment from a Canadian device industry perspective.

    Science.gov (United States)

    Ferrusi, Ilia L; Ames, David; Lim, Morgan E; Goeree, Ron

    2009-05-01

    Health technology assessment has significantly improved the decision-making process via the thorough and systematic evaluation of the clinical utility and cost-effectiveness of new drugs and health technologies. However, the device industry faces a significant challenge in meeting the evidentiary demands of the health technology assessment process, particularly given the small size of the Canadian market and device manufacturers. This is further compounded by the somewhat short-sighted nature of health care budgets, which see medical devices as a cost-driver given the sometimes significant upfront investment required to implement a technology producing downstream benefits in the long-term. Industry is the research and development of the health care system, but innovative development could be stifled unless the health technology assessment process recognizes the risk of manufacturers. The authors propose that health technology assessment can be improved by recognizing the challenges that device manufacturers face and by sharing the risk associated with evaluations of effectiveness. Health technology assessment is a powerful tool that can be used to evaluate new and potentially obsolete technologies alike, with the goal of meeting the needs of patients as customers of both the device industry and the health care system.

  4. NASA Strategic Roadmap: Origin, Evolution, Structure, and Destiny of the Universe

    Science.gov (United States)

    White, Nicholas E.

    2005-01-01

    The NASA strategic roadmap on the Origin, Evolution, Structure and Destiny of the Universe is one of 13 roadmaps that outline NASA s approach to implement the vision for space exploration. The roadmap outlines a program to address the questions: What powered the Big Bang? What happens close to a Black Hole? What is Dark Energy? How did the infant universe grow into the galaxies, stars and planets, and set the stage for life? The roadmap builds upon the currently operating and successful missions such as HST, Chandra and Spitzer. The program contains two elements, Beyond Einstein and Pathways to Life, performed in three phases (2005-2015, 2015-2025 and >2025) with priorities set by inputs received from reviews undertaken by the National Academy of Sciences and technology readiness. The program includes the following missions: 2005-2015 GLAST, JWST and LISA; 2015-2025 Constellation-X and a series of Einstein Probes; and >2025 a number of ambitious vision missions which will be prioritized by results from the previous two phases.

  5. History of the international societies in health technology assessment: International Society for Technology Assessment in Health Care and Health Technology Assessment International.

    Science.gov (United States)

    Banta, David; Jonsson, Egon; Childs, Paul

    2009-07-01

    The International Society for Technology Assessment in Health Care (ISTAHC) was formed in 1985. It grew out of the increasing awareness of the international dimensions of health technology assessment (HTA) and the need for new communication methods at the international level. The main function of ISTAHC was to present an annual conference, which gradually grew in size, and also to generally improve in quality from to year. ISTAHC overextended itself financially early in the first decade of the 2000s and had to cease its existence. A new society, Health Technology Assessment international (HTAi), based on many of the same ideas and people, grew up beginning in the year 2003. The two societies have played a large role in making the field of HTA visible to people around the world and providing a forum for discussion on the methods and role of HTA.

  6. Hydrogen Storage Technical Team Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-06-01

    The mission of the Hydrogen Storage Technical Team is to accelerate research and innovation that will lead to commercially viable hydrogen-storage technologies that meet the U.S. DRIVE Partnership goals.

  7. Assessment of Ga2O3 technology

    Science.gov (United States)

    2016-09-15

    electronics application is the only driver for the technology at present. This type of electronics have a large commercial market , but there are...vol. 43, p. 7133, 2004. [119] A. J. Freeman, K. R. Poeppelmeier, T. O. Mason, R. P. H. Chang, and T. J. Marks, "Chemical and Thin-Film Strategies for...doped β-Ga2O3 single crystals," Applied Physics Letters, vol. 92, p. 201914, 2008. [138] R. A. Laudise, J. B. Mullin , B. Mutaftschiev, and K. Nassau

  8. Technology assessment of geothermal energy resource development

    Energy Technology Data Exchange (ETDEWEB)

    1975-04-15

    Geothermal state-of-the-art is described including geothermal resources, technology, and institutional, legal, and environmental considerations. The way geothermal energy may evolve in the United States is described; a series of plausible scenarios and the factors and policies which control the rate of growth of the resource are presented. The potential primary and higher order impacts of geothermal energy are explored, including effects on the economy and society, cities and dwellings, environmental, and on institutions affected by it. Numerical and methodological detail is included in appendices. (MHR)

  9. Built Environment Wind Turbine Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Smith, J. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Forsyth, T. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Sinclair, K. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Oteri, F. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2012-11-01

    The market currently encourages BWT deployment before the technology is ready for full-scale commercialization. To address this issue, industry stakeholders convened a Rooftop and Built-Environment Wind Turbine Workshop on August 11 - 12, 2010, at the National Wind Technology Center, located at the U.S. Department of Energy’s National Renewable Energy Laboratory in Boulder, Colorado. This report summarizes the workshop.

  10. Are Key Principles for improved health technology assessment supported and used by health technology assessment organizations?

    Science.gov (United States)

    Neumann, Peter J; Drummond, Michael F; Jönsson, Bengt; Luce, Bryan R; Schwartz, J Sanford; Siebert, Uwe; Sullivan, Sean D

    2010-01-01

    Previously, our group-the International Working Group for HTA Advancement-proposed a set of fifteen Key Principles that could be applied to health technology assessment (HTA) programs in different jurisdictions and across a range of organizations and perspectives. In this commentary, we investigate the extent to which these principles are supported and used by fourteen selected HTA organizations worldwide. We find that some principles are broadly supported: examples include being explicit about HTA goals and scope; considering a wide range of evidence and outcomes; and being unbiased and transparent. Other principles receive less widespread support: examples are addressing issues of generalizability and transferability; being transparent on the link between HTA findings and decision-making processes; considering a full societal perspective; and monitoring the implementation of HTA findings. The analysis also suggests a lack of consensus in the field about some principles--for example, considering a societal perspective. Our study highlights differences in the uptake of key principles for HTA and indicates considerable room for improvement for HTA organizations to adopt principles identified to reflect good HTA practices. Most HTA organizations espouse certain general concepts of good practice--for example, assessments should be unbiased and transparent. However, principles that require more intensive follow-up--for example, monitoring the implementation of HTA findings--have received little support and execution.

  11. National cyber defense high performance computing and analysis : concepts, planning and roadmap.

    Energy Technology Data Exchange (ETDEWEB)

    Hamlet, Jason R.; Keliiaa, Curtis M.

    2010-09-01

    There is a national cyber dilemma that threatens the very fabric of government, commercial and private use operations worldwide. Much is written about 'what' the problem is, and though the basis for this paper is an assessment of the problem space, we target the 'how' solution space of the wide-area national information infrastructure through the advancement of science, technology, evaluation and analysis with actionable results intended to produce a more secure national information infrastructure and a comprehensive national cyber defense capability. This cybersecurity High Performance Computing (HPC) analysis concepts, planning and roadmap activity was conducted as an assessment of cybersecurity analysis as a fertile area of research and investment for high value cybersecurity wide-area solutions. This report and a related SAND2010-4765 Assessment of Current Cybersecurity Practices in the Public Domain: Cyber Indications and Warnings Domain report are intended to provoke discussion throughout a broad audience about developing a cohesive HPC centric solution to wide-area cybersecurity problems.

  12. Guidance on the Technology Performance Level (TPL) Assessment Methodology

    Energy Technology Data Exchange (ETDEWEB)

    Weber, Jochem [National Renewable Energy Lab. (NREL), Golden, CO (United States); Roberts, Jesse D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Babarit, Aurelien [Ecole Centrale de Nantes (France). Lab. of Research in Hydrodynamics, Energetics and Atmospheric Environment (LHEEA); Costello, Ronan [Wave Venture, Penstraze (United Kingdom); Bull, Diana L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Neilson, Kim [Ramboll, Copenhagen (Denmark); Bittencourt, Claudio [DNV GL, London (United Kingdom); Kennedy, Ben [Wave Venture, Penstraze (United Kingdom); Malins, Robert Joseph [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Dykes, Katherine [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-09-01

    This document presents the revised Technology Performance Level (TPL) assessment methodology. There are three parts to this revised methodology 1) the Stakeholder Needs and Assessment Guidance (this document), 2) the Technical Submission form, 3) the TPL scoring spreadsheet. The TPL assessment is designed to give a technology neutral or agnostic assessment of any wave energy converter technology. The focus of the TPL is on the performance of the technology in meeting the customer’s needs. The original TPL is described in [1, 2] and those references also detail the critical differences in the nature of the TPL when compared to the more widely used technology readiness level (TRL). (Wave energy TRL is described in [3]). The revised TPL is particularly intended to be useful to investors and also to assist technology developers to conduct comprehensive assessments in a way that is meaningful and attractive to investors. The revised TPL assessment methodology has been derived through a structured Systems Engineering approach. This was a formal process which involved analyzing customer and stakeholder needs through the discipline of Systems Engineering. The results of the process confirmed the high level of completeness of the original methodology presented in [1] (as used in the Wave Energy Prize judging) and now add a significantly increased level of detail in the assessment and an improved more investment focused structure. The revised TPL also incorporates the feedback of the Wave Energy Prize judges.

  13. Health Technology Assessment of Integrated Home Care

    DEFF Research Database (Denmark)

    Larsen, Torben

    2012-01-01

    Background: The fragmented delivery of healthcare and social services as advanced by WHO 2002. Objectives: This project of international collaboration assesses integrated home care (IHC) for frail elder somatic patients as compared to usual hospital care. Methods: The HTA follows the special...

  14. Gender and risk assessment in contraceptive technologies

    NARCIS (Netherlands)

    van Kammen, Jessika; Oudshoorn, Nelly E.J.

    This paper concerns a comparison of risk assessment practices of contraceptives for women and men. Our analysis shows how the evaluation of health risks of contraceptives does not simply reflect the specific effects of chemical compounds in the human body. Rather, we show how side-effects were rated

  15. Emerging technologies for assessing HER2 amplification

    NARCIS (Netherlands)

    Penault-Llorca, Frédérique; Bilous, Michael; Dowsett, Mitch; Hanna, Wedad; Osamura, Robert Yoshiyuki; Rüschoff, Josef; van de Vijver, Marc

    2009-01-01

    Patients with human epidermal growth factor receptor-2 (HER2)+ breast cancer are eligible for trastuzumab treatment; therefore, accurate assessment of HER2 status is essential. Until recently, only 2 methods were validated for determining the HER2 status of breast tumors in the routine diagnostic

  16. Highly Integrated Model Assessment Technology and Tools

    Science.gov (United States)

    Pirnay-Dummer, Pablo; Ifenthaler, Dirk; Spector, J. Michael

    2010-01-01

    Effective and efficient measurement of the development of skill and knowledge, especially in domains of human activity that involve complex and challenging problems, is important with regard to workplace and academic performance. However, there has been little progress in the area of practical measurement and assessment, due in part to the lack of…

  17. Technology Development Risk Assessment for Space Transportation Systems

    Science.gov (United States)

    Mathias, Donovan L.; Godsell, Aga M.; Go, Susie

    2006-01-01

    A new approach for assessing development risk associated with technology development projects is presented. The method represents technology evolution in terms of sector-specific discrete development stages. A Monte Carlo simulation is used to generate development probability distributions based on statistical models of the discrete transitions. Development risk is derived from the resulting probability distributions and specific program requirements. Two sample cases are discussed to illustrate the approach, a single rocket engine development and a three-technology space transportation portfolio.

  18. Expanding Health Technology Assessments to Include Effects on the Environment

    DEFF Research Database (Denmark)

    Marsh, Kevin; Ganz, Michael Lee; Hsu, John

    2016-01-01

    for incorporating environmental impacts into the health technology assessment (HTA) process and discusses the associated challenges. Two arguments favor incorporating environmental impacts into HTA: 1) environmental changes could directly affect people's health and 2) policy decision makers have broad mandates...

  19. Assessing the impact of new technology on complex sociotechnical systems

    CSIR Research Space (South Africa)

    Oosthuizen, R

    2016-08-01

    Full Text Available In complex sociotechnical systems, cognitive and social humans use technology to make sense of situations for decisions. These elements make sociotechnical systems difficult to develop. A modelling and assessment methodology for systems engineering...

  20. Constructive Technology Assessment and the Methodology of Insertion

    NARCIS (Netherlands)

    Rip, Arie; Robinson, Douglas K.R.; Doorn, Neelke; Schuurbiers, Daan; van der Poel, Ibo; Gorman, Michael E.

    2013-01-01

    Constructive Technology Assessment (CTA) started out (in the Netherlands in the late 1980s) as an attempt to broaden technology developments by including more aspects and more actors, and has been further positioned as a way to overcome the institutionalised division of labour between promotion and

  1. Technology needs assessment (TNA) resource document for South Africa

    CSIR Research Space (South Africa)

    Taviv, R

    2007-08-01

    Full Text Available TNA(Technology needs assessment) is a requirement of Article 4.5 of the UNFCCC ‘Technology Transfer’ is a broad set of processes covering the flows of know-how, experience and equipment for mitigating or adapting to climate change amongst different...

  2. Lifecycle Assessment of Biofuel Production from Wood Pyrolysis Technology

    Science.gov (United States)

    Manyele, S. V.

    2007-01-01

    Due to a stronger dependency on biomass for energy, there is a need for improved technologies in biomass-to-energy conversion in Tanzania. This paper presents a life cycle assessment (LCA) of pyrolysis technology used for conversion of wood and wood waste to liquid biofuel. In particular, a survey of environmental impacts of the process is…

  3. HEALTH TECHNOLOGY ASSESSMENT, DELIBERATIVE PROCESS, AND ETHICALLY CONTESTED ISSUES

    NARCIS (Netherlands)

    Daniels, N.; Wilt, G.J. van der

    2016-01-01

    Healthcare technology assessment (HTA) aims to support decisions as to which technologies should be used in which situations to optimize value. Because such decisions will create winners and losers, they are bound to be controversial. HTA, then, faces a dilemma: should it stay away from such

  4. 1981 LTA technology assessment - Past and present

    Science.gov (United States)

    Ashford, R. L.; Levitt, B. B.; Mayer, N. J.; Vocar, J. M.; Woodward, D. E.

    1981-01-01

    A four-part presentation is made of (1) lessons learned from the design and operation of the 'classic' airships of the 1920s and 30s, with respect to such issues as construction, propulsion, control, instrumentation, ground handling, habitability, aerodynamics, and structure and construction; (2) lessons learned from the development of such specialized lighter-than-air (LTA) concepts as metal-clad airships, semi-buoyant lifting bodies, experimental, sport and commercial free balloons, high-altitude platforms, and tethered aerostats; (3) the current status of LTA technology in various countries, with emphasis on significant developments in configuration, dynamics, control, structures, materials, and propulsion; and (4) a projection of future trends. It is concluded that socio-economic factors will strongly influence and encourage LTA development in the 1990s.

  5. The hydrogen technology assessment, phase 1

    Science.gov (United States)

    Bain, Addison

    1991-01-01

    The purpose of this phase 1 report is to begin to form the information base of the economics and energy uses of hydrogen-related technologies on which the members of the National Hydrogen Association (NHA) can build a hydrogen vision of the future. The secondary goal of this report is the development of NHA positions on national research, development, and demonstration opportunities. The third goal, with the aid of the established hydrogen vision and NHA positions, is to evaluate ongoing federal research goals and activities. The evaluations will be performed in a manner that compares the costs associated with using systems that achieve those goals against the cost of performing those tasks today with fossil fuels. From this ongoing activity should emerge an NHA information base, one or more hydrogen visions of the future, and cost and performance targets for hydrogen applications to complete in the market place.

  6. Assessing the readiness of hospice volunteers to utilize technology.

    Science.gov (United States)

    Wittenberg-Lyles, Elaine; Shaunfield, Sara; Oliver, Debra Parker; Demiris, George; Schneider, Greg

    2012-09-01

    Although hospice volunteer programs contribute to patient care, little is known about their utilization and adaptation of technology. A survey was posted to the Hospice Volunteer Association Web site to assess technology use among volunteer coordinators and volunteers. Results revealed that participants have access to computers, Internet, and e-mail at the hospice agency and routinely use cellular phones and e-mail. Despite the use of technology, communication problems with volunteers hindered the coordinator's ability to manage scheduling, training, and volunteer assignments for patient care. Coordinators and volunteers felt comfortable utilizing technology but were less comfortable using technology in the patients' home. Several areas are identified for development and integration of advanced technology in volunteer programs. Future research is needed to ease technology implementation and increase volunteer acceptance.

  7. Technical and Technological Skills Assessment in Laparoscopic Surgery

    Science.gov (United States)

    Chang, Avril; Vincent, Charles

    2006-01-01

    Objectives: Surgical appraisal and revalidation are key components of good surgical practice and training. Assessing technical skills in a structured manner is still not widely used. Laparoscopic surgery also requires the surgeon to be competent in technological aspects of the operation. Methods: Checklists for generic, specific technical, and technological skills for laparoscopic cholecystectomies were constructed. Two surgeons with >12 years postgraduate surgical experience assessed each operation blindly and independently on DVD. The technological skills were assessed in the operating room. Results: One hundred operations were analyzed. Eight trainees and 10 consultant surgeons were recruited. No adverse events occurred due to technical or technological skills. Mean interrater reliability was kappa=0.88, P=technical and technological skills between trainee and consultant surgeons were significant, Mann-Whitney P=technical and technological skills can be measured to assess performance of laparoscopic surgeons. This technical and technological assessment tool for laparoscopic surgery seems to have face, content, concurrent, and construct validities and could be modified and applied to any laparoscopic operation. The tool has the possibility of being used in surgical training and appraisal. We aim to modify and apply this tool to advanced laparoscopic operations. PMID:17212881

  8. Technical and Technological Skills Assessment in Laparoscopic Surgery

    OpenAIRE

    Sarker, Sudip K.; Chang, Avril; Vincent, Charles

    2006-01-01

    Objectives: Surgical appraisal and revalidation are key components of good surgical practice and training. Assessing technical skills in a structured manner is still not widely used. Laparoscopic surgery also requires the surgeon to be competent in technological aspects of the operation. Methods: Checklists for generic, specific technical, and technological skills for laparoscopic cholecystectomies were constructed. Two surgeons with >12 years postgraduate surgical experience assessed each op...

  9. ASSESSING INDIVIDUAL PERFORMANCE ON INFORMATION TECHNOLOGY ADOPTION: A NEW MODEL

    OpenAIRE

    Diah Hari Suryaningrum

    2012-01-01

    This paper aims to propose a new model in assessing individual performance on information technology adoption. The new model to assess individual performance was derived from two different theories: decomposed theory of planned behavior and task-technology fit theory. Although many researchers have tried to expand these theories, some of their efforts might lack of theoretical assumptions. To overcome this problem and enhance the coherence of the integration, I used a theory from social scien...

  10. CEATI distribution roadmap : what's next?

    International Nuclear Information System (INIS)

    2006-01-01

    The future of the electric distribution utility environment over the next 20 years was discussed. A study was conducted to assist utilities in developing future implementation plans. Twenty-one scenarios were created in order to obtain a list of technologies that may impact the future of the distribution grid. Scenarios considered potential policies and regulation, and investigated technologies required to implement each scenario. The scenarios considered future energy markets; business environments; distribution assets; and workforce developments. A distribution value chain classification was used to identify potential synergies. Results of the study showed that distributed resources will become more important in the next 20 years. Employee and system safety will require active consideration as the electricity grid becomes more complex. A second phase of the project will identify key technologies, common infrastructure needs, and guidelines for transforming distribution utilities in the future

  11. Contact radiotherapy. Report of technological assessment

    International Nuclear Information System (INIS)

    Ortholan, Cecile; Melin, Nicole; Lee-Robin, Sun Hae; David, Denis Jean; Pages, Frederique; Devaud, Christine; Noel, Georges; Biga, Julie; Moty-Monnereau, Celine; Canet, Philippe; Lascols, Sylvie; Lamas, Muriel; Ramdine, Jessica; Tuil, Louise

    2008-10-01

    This report aims at assessing safety, indications, the role in therapeutic strategy, and efficiency of contact radiotherapy. It also aims at answering questions like: is the contact radiotherapy technique validated? What are the indications for contact radiotherapy? What about the efficiency and safety of contact radiotherapy? After a presentation of preliminary notions on radiotherapy (radiation types, dose, and irradiation techniques), the report presents this specific technique of contact radiotherapy: definition, devices, use recommendations, issues of radiation protection, modalities of performance of a contact radiotherapy session, and concerned pathologies. Then, based on a literature survey, this report addresses the various concerned tumours (skin, rectum, brain, breast), indicates some general information about these tumours (epidemiological data, anatomy and classification, therapeutic options, radiotherapy), and proposes an assessment of the efficiency and safety of contact radiotherapy

  12. Assessment of Wearable Sensor Technologies for Biosurveillance

    Science.gov (United States)

    2014-11-01

    include: textile -based wearable sensors, epidermal tattoos, DNA and protein sensors, forensic detection of explosives, remote environmental sensing...by changing the selectivity of the carbon electrodes . The device was built to assess a soldier’s health in the battlefield by continuously...tape, conductive gel, electrodes or bulky wiring. Embedded in a film that is thinner than a human hair, these electronic sensors muse van der Waal

  13. The conceptual and practical challenges to technology categorisation in the preparation of technology needs assessments

    DEFF Research Database (Denmark)

    Nygaard, Ivan; Hansen, Ulrich Elmer

    2015-01-01

    for the challenges in formulating plans of actions for technologies. If, due to a lack of conceptual clarity, it is not clear to countries whether the diffusion of a specific technology should be implemented by a project or by means of an enabling framework, the measures proposed in the action plans may......The strong focus in climate negotiations on the transfer and diffusion of technologies as ameans to mitigate and adapt to climate change has entailed various programs to promote the transfer and diffusion of climate technologies, including the Technology Needs Assessment project (TNA). Despite...... the technology focus in the project, practice shows that the questions of what a technology is and how the key concepts of technology transfer and diffusion should be understood and operationalized remain diffuse. This paper explores the reasons for this by analysing the experience of the TNA project in using...

  14. A Strategic Roadmap to Centauri

    Science.gov (United States)

    Johnson, L.; Harris, D.; Trausch, A.; Matloff, G. L.; Taylor, T.; Cutting, K.

    This paper discusses the connectivity between in-space propulsion and in-space fabrication/repair and is based upon a workshop presentation by Les Johnson, manager of the In-Space Propulsion (ISP) Technology Project at NASA's Marshall Space Flight Center (MSFC) in Huntsville, Alabama. Technologies under study by ISP include aerocapture, advanced solar- electric propulsion, solar-thermal propulsion, advanced chemical propulsion, tethers and solar-photon sails. These propulsion systems are all approaching technology readiness levels (TRLs) at which they can be considered for application in space- science and exploration missions. Historically, human frontiers have expanded as people have learned to “live-off-the-land” in new environments and to exploit local resources. With this expansion, frontier settlements have required development of transportation improvements to carry tools and manufactured products to and from the frontier. It is demonstrated how ISP technologies will assist in the development of the solar-system frontier. In-space fabrication and repair will both require and assist the development of ISP propulsion systems, whether humans choose to settle planetary surfaces or to exploit resources of small Solar System bodies. As was true for successful terrestrial pioneers, in-space settlement and exploitation will require sophisticated surveys of inner and outer Solar System objects. ISP technologies will contribute to the success of these surveys, as well as to the efforts to retrieve Solar System resources. In a similar fashion, the utility of ISP products will be greatly enhanced by the technologies of in-space repair and fabrication. As in-space propulsion, fabrication and repair develop, human civilization may expand well beyond the Earth. In the future, small human communities (preceded by robotic explorers) may utilize these techniques to set sail for the nearest stars.

  15. Strategic Roadmap 2024: Powering the Energy Frontier

    Energy Technology Data Exchange (ETDEWEB)

    None

    2014-05-01

    Strategic Roadmap 2024 applies our historic mission to the dynamic and evolving industry environment that includes myriad new regulations, the growing presence of interruptible and intermittent generation resources and constraints on our hydro resources. It also ties together Western’s strategy, initiatives, capital budgets and annual targets to move the agency in one direction, continue to meet customer needs and provide the best value as an organization.

  16. U.S. Department of Energy Office of Nuclear Technology Research and Eevelopment ((NTRD) comprehensive summary of QA assessments for FY17

    Energy Technology Data Exchange (ETDEWEB)

    Trost, Alan L. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2017-09-14

    The U.S. Department of Energy (DOE) Office of Nuclear Energy (NE) has developed a research and development (R&D) roadmap for its research, development, and demonstration (RD&D) activities to ensure nuclear energy remains a compelling and viable energy option for the U.S. The roadmap defines NE RD&D activities and objectives that address the challenges to research, develop and demonstrate options to the current U.S commercial fuel cycle to enable the safe, secure, economic, and sustainable expansion of nuclear energy, while minimizing proliferation and terrorism risks expanding the use of nuclear power. The roadmap enables the development of technologies and other solutions that can improve the reliability, sustain the safety, and extend the life of current reactors. In addition, it will help to develop improvements in the affordability of the new reactors to enable nuclear energy to help meet the Administration’s energy security and climate change goals.

  17. Technology assessment for Spaceship Two, space tourism, and private spaceflight

    Science.gov (United States)

    Hancock, Randy

    A seven-step technology assessment was conducted to address questions regarding the significance and likely consequences associated with the introduction of Spaceship Two, space tourism, and private spaceflight. Impacts were assessed across four categories: the Role and Functions of Government, Private Industry Factors, Cultural and Societal Impacts, and the Time Frame in which these impacts were anticipated to occur. The technology assessment findings were compared to the results of expert interviews that addressed the sane four categories. The researcher noted that, while there was overwhelming agreement between the technology assessment's primary impacts and the expert interview responses, there were several differences. The technology assessment and interviewees agreed that the federal government would likely be both a regulator and user of private spaceflight. Both agreed that business partnerships would be key in pursuing private spaceflight. There was also consensus that, as market forces come to bear, ticket prices would drop and a larger market and broader passenger demographic would emerge. The technology assessment and experts agreed that an accident, especially one early in the industry's evolution, could be disastrous. Both agreed that private spaceflight can serve as a inspiration to students and be a positive influence in society, and both agreed that the start of passenger flights should take place in the 2010 - 2012 timeframe. Due to the potentially disastrous consequences of an accident, there was agreement between the technology assessment and experts on the value of flight and ground crew training, driven by insurance carriers and federal mandate. Most differences between the technology assessment's findings and the expert interview responses were due to omission, rather than direct disagreement. However, this was not the case in every instance. The most significant difference between the technology assessment and the experts involved the

  18. Framework for dementia Quality of Life assessment with Assistive Technology

    DEFF Research Database (Denmark)

    Peterson, Carrie Beth; Prasad, Neeli R.; Prasad, Ramjee

    2010-01-01

    This paper proposes a theoretical framework for a Quality of Life (QOL) evaluation tool that is sensitive, flexible, computerized, and specific to assistive technology (AT) for dementia care. Using the appropriate evaluation tool serves to improve methodologies that are used for AT assessment......, enable the selection of appropriate methods, improve understanding of how health technology outcomes affect overall care, develop the competence of technology assessments by developing a more efficient procedure for assessment, and further computerized assessment use. One of the many challenges...... in determining functional definitions and indicators for QOL. Current QOL measures inspired recommendations for a future assessment tool in order to assist investigators and clinicians in selecting the optimal method for their needs. This paper provides a theoretical analysis focused on future applications...

  19. Space-reactor electric systems: subsystem technology assessment

    International Nuclear Information System (INIS)

    Anderson, R.V.; Bost, D.; Determan, W.R.

    1983-01-01

    This report documents the subsystem technology assessment. For the purpose of this report, five subsystems were defined for a space reactor electric system, and the report is organized around these subsystems: reactor; shielding; primary heat transport; power conversion and processing; and heat rejection. The purpose of the assessment was to determine the current technology status and the technology potentials for different types of the five subsystems. The cost and schedule needed to develop these potentials were estimated, and sets of development-compatible subsystems were identified

  20. Space-reactor electric systems: subsystem technology assessment

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, R.V.; Bost, D.; Determan, W.R.

    1983-03-29

    This report documents the subsystem technology assessment. For the purpose of this report, five subsystems were defined for a space reactor electric system, and the report is organized around these subsystems: reactor; shielding; primary heat transport; power conversion and processing; and heat rejection. The purpose of the assessment was to determine the current technology status and the technology potentials for different types of the five subsystems. The cost and schedule needed to develop these potentials were estimated, and sets of development-compatible subsystems were identified.

  1. Methodology of constructive technology assessment in health care.

    Science.gov (United States)

    Douma, Kirsten F L; Karsenberg, Kim; Hummel, Marjan J M; Bueno-de-Mesquita, Jolien M; van Harten, Wim H

    2007-01-01

    Technologies in health care are evolving quickly, with new findings in the area of biotechnological and genetic research being published regularly. A health technology assessment (HTA) is often used to answer the question of whether the new technology should be implemented into clinical practice. International evidence confirms that the results of HTA research sometimes have limited impact on practical implementation and on coverage decisions; the study design is commonly based on the paradigm of stability of both the technology and the environment, which is often not the case. Constructive technology assessment (CTA) was first described in the 1980s. In addition to the traditional HTA elements, this approach also takes into account the technology dynamics by emphasizing sociodynamic processes. With a CTA approach, comprehensive assessment can be combined with an intentional influence in a favorable direction to improve quality. In this study, the methodological aspects mainly concerning the diagnostic use of CTA are explained. The methodology will be illustrated using the controlled introduction of a new technology, called microarray analysis, into the clinical practice of breast cancer treatment as a case study. Attention is paid to the operationalization of the phases of development and implementation and the research methods most appropriate for CTA. In addition to HTA, CTA can be used as a complementary approach, especially in technologies that are introduced in an early stage of development in a controlled way.

  2. Elaboration and validation of an assistive technology assessment questionnaire

    Directory of Open Access Journals (Sweden)

    Fernanda Jorge Guimarães

    2015-06-01

    Full Text Available Assistive Technologies consists of resources, methods, and strategies favoring autonomy and inclusion of elderly and people with disabilities, being scarce in the literature instruments assessing them. A methodology study conducted with a panel of specialists and people with visual impairment, aimed to elaborate and validate a questionnaire to assess educational assistive technology. To consider an item as valid, we used 80% as agreement percentage, and validity and reliability of the questionnaire were calculated. Assistive Technology was characterized in six attributes: objectives, access, clarity, structure and presentation, relevance and efficacy, interactivity, and 19 items were elaborated to compose the questionnaire. From those, 11 obtained percentages higher than 80%, seven were modified and one was excluded. The instrument Cronbach’s alpha was 0,822, guaranteeing validity and reliability of the tool to assess health education Assistive Technology, and therefore, its use is indicated.

  3. Noninvasive imaging technologies for cutaneous wound assessment: A review.

    Science.gov (United States)

    Paul, Dereck W; Ghassemi, Pejhman; Ramella-Roman, Jessica C; Prindeze, Nicholas J; Moffatt, Lauren T; Alkhalil, Abdulnaser; Shupp, Jeffrey W

    2015-01-01

    The ability to phenotype wounds for the purposes of assessing severity, healing potential and treatment is an important function of evidence-based medicine. A variety of optical technologies are currently in development for noninvasive wound assessment. To varying extents, these optical technologies have the potential to supplement traditional clinical wound evaluation and research, by providing detailed information regarding skin components imperceptible to visual inspection. These assessments are achieved through quantitative optical analysis of tissue characteristics including blood flow, collagen remodeling, hemoglobin content, inflammation, temperature, vascular structure, and water content. Technologies that have, to this date, been applied to wound assessment include: near infrared imaging, thermal imaging, optical coherence tomography, orthogonal polarization spectral imaging, fluorescence imaging, laser Doppler imaging, microscopy, spatial frequency domain imaging, photoacoustic detection, and spectral/hyperspectral imaging. We present a review of the technologies in use or development for these purposes with three aims: (1) providing basic explanations of imaging technology concepts, (2) reviewing the wound imaging literature, and (3) providing insight into areas for further application and exploration. Noninvasive imaging is a promising advancement in wound assessment and all technologies require further validation. © 2015 by the Wound Healing Society.

  4. Technology Enhanced Formative Assessment for 21st Century Learning

    Science.gov (United States)

    Spector, J. Michael; Ifenthaler, Dirk; Sampson, Demetrios; Yang, Lan; Mukama, Evode; Warusavitarana, Amali; Dona, Kulari Lokuge; Eichhorn, Koos; Fluck, Andrew; Huang, Ronghuai; Bridges, Susan; Lu, Jiingyan; Ren, Youqun; Gui, Xiaoqing; Deneen, Christopher C.; San Diego, Jonathan; Gibson, David C.

    2016-01-01

    This paper is based on the deliberations of the Assessment Working Group at EDUsummIT 2015 in Bangkok, Thailand. All of the members of Thematic Working Group 5 (TWG5) have contributed to this synthesis of potentials, concerns and issues with regard to the role of technology in assessment as, for and of learning in the 21st century. The group…

  5. Technologies for Interactive Learning and Assessment Content Development

    Science.gov (United States)

    Gusev, Marjan; Ristov, Sasko; Armenski, Goce

    2016-01-01

    Recent technology trends evolved the student assessment from traditional ones ("pen-and-paper" and "face-to-face") to modern e-Assessment system. These modern approaches allow the teachers to conduct and evaluate an exam with huge number of students in a short period of time. Even more important, both the teacher and the…

  6. Utilisation of medical technology assessment in health policy

    NARCIS (Netherlands)

    van den Heuvel, WJA; Wieringh, R; van den Heuvel, LPM

    1997-01-01

    Objective: To assess the contribution of medical technology assessment (MTA) to health policy decision making, the question has to be answered whether MTA is actually being used in decision-making processes and what factors are related to its utilisation. Design: We investigated recent Dutch policy

  7. Harnessing Technology to Assess Oral Communication in Business English

    Science.gov (United States)

    Levy, Tal; Gertler, Hedy

    2015-01-01

    Assessing oral skills in relatively large Business English classes seems a most formidable task for any teacher. How does one make sure to get multiple and valid assessments of each student? This action research paper provides supporting evidence for the correlation between the use of technology and students' engagement. This was achieved by…

  8. Capturing the Sun: A Roadmap for Navigating Data-Access Challenges and Auto-Populating Solar Home Sales Listings

    Energy Technology Data Exchange (ETDEWEB)

    Stukel, Laura [Elevate Energy, Chicago, IL (United States); Hoen, Ben [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Adomatis, Sandra [Adomatis Appraisal Services, Punta Gorda, FL (United States); Foley, Craig [Sustainable Real Estate Consulting Services, Somerville, MA (United States); Parsons, Laura [Center for Sustainable Energy, San Diego, CA (United States); James, Mark [Vermont Law School, South Royalton, VT (United States). Inst. for Energy and Environment; Mastor, Roxana-Andreea [Vermont Law School, South Royalton, VT (United States). Inst. for Energy and Environment; Wedewer, Lindsey [Colorado Energy Office, Denver, CO (United States)

    2017-04-13

    Capturing the Sun: A Roadmap for Navigating Data-Access Challenges and Auto-Populating Solar Home Sales Listings supports a vision of solar photovoltaic (PV) advocates and real estate advocates evolving together to make information about solar homes more accessible to home buyers and sellers and to simplify the process when these homes are resold. The Roadmap is based on a concept in the real estate industry known as automatic population of fields. Auto-population (also called auto-pop in the industry) is the technology that allows data aggregated by an outside industry to be matched automatically with home sale listings in a multiple listing service (MLS).

  9. The principles of Health Technology Assessment in laboratory medicine.

    Science.gov (United States)

    Liguori, Giorgio; Belfiore, Patrizia; D'Amora, Maurizio; Liguori, Renato; Plebani, Mario

    2017-01-01

    The Health Technology Assessment (HTA) is a multi-professional and multidisciplinary evaluation approach designed to assess health technology in the broadest sense of the term, from its instruments to the rearranging of its organizational structures. It is by now an established methodology at national and international levels that involves several medical disciplines thanks to its versatility. Laboratory medicine is one of these disciplines. Such specialization was subjected, in recent years, to deep changes even from an organizational standpoint, in order to meet the health needs of the population, making them as effective and cost-effective as possible. In this regard, HTA was the tool used to assess implications in different areas.

  10. Improving tag/seal technologies: the vulnerability assessment component

    International Nuclear Information System (INIS)

    Jones, J.L.

    1996-01-01

    The Department of Energy (DOE), specifically the Office of Nonproliferation and National Security, has sponsored the development of numerous tag and seal technologies for high-security/high-valued applications. One important component in this technology development effort has been the continuous integration of vulnerability assessments. The Idaho National Engineering Laboratory (INEL) has been the lead laboratory for vulnerability assessments of fiber-optic-based tag/seal technologies. This paper presents a brief historical overview and the current status of the DOE high-security tag/seal development program and discusses INEL's adversarial role and assessment philosophy. Verification testing criteria used to define ''successful'' tampering attempts/attacks are discussed. Finally, the advantages of integrating a vulnerability assessment into the development of commercial security tag/seals are presented

  11. Energy and the environment: Technology assessment and policy options

    International Nuclear Information System (INIS)

    Silveira, M.P.W.

    1990-01-01

    While the energy crisis of the 1970s stimulated technological innovation in developed countries, it often had the opposite effect in the third world. However, developing countries can be considered to have two types of energy systems: ''connected'' and ''disconnected''. The connected system is affected by changes in the price of commercial energy, but the disconnected system is usually rural and remote. Commercial forms of energy may be needed in the disconnected system, but they are largely unavailable. In some of the developing countries, new energy technologies have therefore been developed which adapt traditional technologies still existing in the disconnected sector. In this article some of the work of the United National Centre for Science and Technology for Development is described. Through its ATAS (Advance Technology Alert System) programme, international and regional workshops are held to discuss policy questions arising in regard to new technologies and developments. Workshops have been held in Moscow on new energy technologies in the industry subsystem (connected), in Guatemala City on new energy technologies and the disconnected system, and in Ottawa on new energy technologies, transportation and development. Initial assessments made by or through these workshops are outlined here. A fourth workshop will be held in June 1990 in Saarbrucken on energy technologies and climate change. (author). 3 figs

  12. Technological and life cycle assessment of organics processing odour control technologies

    International Nuclear Information System (INIS)

    Bindra, Navin; Dubey, Brajesh; Dutta, Animesh

    2015-01-01

    As more municipalities and communities across developed world look towards implementing organic waste management programmes or upgrading existing ones, composting facilities are emerging as a popular choice. However, odour from these facilities continues to be one of the most important concerns in terms of cost & effective mitigation. This paper provides a technological and life cycle assessment of some of the different odour control technologies and treatment methods that can be implemented in organics processing facilities. The technological assessment compared biofilters, packed tower wet scrubbers, fine mist wet scrubbers, activated carbon adsorption, thermal oxidization, oxidization chemicals and masking agents. The technologies/treatment methods were evaluated and compared based on a variety of operational, usage and cost parameters. Based on the technological assessment it was found that, biofilters and packed bed wet scrubbers are the most applicable odour control technologies for use in organics processing faculties. A life cycle assessment was then done to compare the environmental impacts of the packed-bed wet scrubber system, organic (wood-chip media) bio-filter and inorganic (synthetic media) bio-filter systems. Twelve impact categories were assessed; cumulative energy demand (CED), climate change, human toxicity, photochemical oxidant formation, metal depletion, fossil depletion, terrestrial acidification, freshwater eutrophication, marine eutrophication, terrestrial eco-toxicity, freshwater eco-toxicity and marine eco-toxicity. The results showed that for all impact categories the synthetic media biofilter had the highest environmental impact, followed by the wood chip media bio-filter system. The packed-bed system had the lowest environmental impact for all categories. - Highlights: • Assessment of odour control technologies for organics processing facilities. • Comparative life cycle assessment of three odour control technologies was conducted

  13. Technological and life cycle assessment of organics processing odour control technologies

    Energy Technology Data Exchange (ETDEWEB)

    Bindra, Navin [School of Engineering, University of Guelph, 50 Stone Road East, Guelph, Ontario N1G2W1 (Canada); Dubey, Brajesh, E-mail: bkdubey@civil.iitkgp.ernet.in [School of Engineering, University of Guelph, 50 Stone Road East, Guelph, Ontario N1G2W1 (Canada); Environmental Engineering Division, Department of Civil Engineering, Indian Institute of Technology, Kharagpur, West Bengal 721302 (India); Dutta, Animesh [School of Engineering, University of Guelph, 50 Stone Road East, Guelph, Ontario N1G2W1 (Canada)

    2015-09-15

    As more municipalities and communities across developed world look towards implementing organic waste management programmes or upgrading existing ones, composting facilities are emerging as a popular choice. However, odour from these facilities continues to be one of the most important concerns in terms of cost & effective mitigation. This paper provides a technological and life cycle assessment of some of the different odour control technologies and treatment methods that can be implemented in organics processing facilities. The technological assessment compared biofilters, packed tower wet scrubbers, fine mist wet scrubbers, activated carbon adsorption, thermal oxidization, oxidization chemicals and masking agents. The technologies/treatment methods were evaluated and compared based on a variety of operational, usage and cost parameters. Based on the technological assessment it was found that, biofilters and packed bed wet scrubbers are the most applicable odour control technologies for use in organics processing faculties. A life cycle assessment was then done to compare the environmental impacts of the packed-bed wet scrubber system, organic (wood-chip media) bio-filter and inorganic (synthetic media) bio-filter systems. Twelve impact categories were assessed; cumulative energy demand (CED), climate change, human toxicity, photochemical oxidant formation, metal depletion, fossil depletion, terrestrial acidification, freshwater eutrophication, marine eutrophication, terrestrial eco-toxicity, freshwater eco-toxicity and marine eco-toxicity. The results showed that for all impact categories the synthetic media biofilter had the highest environmental impact, followed by the wood chip media bio-filter system. The packed-bed system had the lowest environmental impact for all categories. - Highlights: • Assessment of odour control technologies for organics processing facilities. • Comparative life cycle assessment of three odour control technologies was conducted

  14. Technological Implications for Assessment Ecosystems: Opportunities for Digital Technology to Advance Assessment

    Science.gov (United States)

    Behrens, John T.; DiCerbo, Kristen E.

    2014-01-01

    Background: It would be easy to think the technological shifts in the digital revolution are simple incremental progressions in societal advancement. However, the nature of digital technology is resulting in qualitative differences in nearly all parts of daily life. Purpose: This paper investigates how the new possibilities for understanding,…

  15. ASSESSMENT OF ORGANIZATIONAL AND TECHNOLOGICAL RELIABILITY OF INDUSTRIAL CONSTRUCTION ENTERPRISES

    Directory of Open Access Journals (Sweden)

    Gazaryan Robert Kamoevich

    2012-10-01

    Full Text Available In this article, the procedure of identification of organizational and technological reliability is described. This methodology is applicable both to separate functional areas and to all industrial enterprises. Its objective is to assess the expediency of reorganization. The objective of this scientific research is the substantiation of reorganization of an industrial enterprise. Multivariable models, or convolutions, were used as research methods. According to the RF law, industrial enterprises are divided into four functional areas, each of which is assessed on the basis of multiple criteria. Assessment of organizational and technological reliability requires a multi-parameter model. Its axes correspond to the number of evaluation criteria. The set of criteria designated for the assessment of organizational and technological reliability is identified on the basis of the homogeneity of trend indicators designated for centripetal and centrifugal models. The axes of a multi-parameter model represent real and benchmark values. The unit serves as the benchmark value; it is the maximal value of this parameter. The formula based on average values shall be used to determine the total value of the above parameters. The authors have also generated a model of organizational and technological reliability of industrial enterprises. It is noteworthy that assessment of organizational and technological reliability of an industrial enterprise requires a concentric multi-layer model developed through the application of the convolution method.

  16. UNITED STATES DEPARTMENT OF ENERGY WASTE PROCESSING ANNUAL TECHNOLOGY DEVELOPMENT REPORT 2007

    Energy Technology Data Exchange (ETDEWEB)

    Bush, S

    2008-08-12

    The Office of Environmental Management's (EM) Roadmap, U.S. Department of Energy--Office of Environmental Management Engineering & Technology Roadmap (Roadmap), defines the Department's intent to reduce the technical risk and uncertainty in its cleanup programs. The unique nature of many of the remaining facilities will require a strong and responsive engineering and technology program to improve worker and public safety, and reduce costs and environmental impacts while completing the cleanup program. The technical risks and uncertainties associated with cleanup program were identified through: (1) project risk assessments, (2) programmatic external technical reviews and technology readiness assessments, and (3) direct site input. In order to address these needs, the technical risks and uncertainties were compiled and divided into the program areas of: Waste Processing, Groundwater and Soil Remediation, and Deactivation and Decommissioning (D&D). Strategic initiatives were then developed within each program area to address the technical risks and uncertainties in that program area. These strategic initiatives were subsequently incorporated into the Roadmap, where they form the strategic framework of the EM Engineering & Technology Program. The EM-21 Multi-Year Program Plan (MYPP) supports the goals and objectives of the Roadmap by providing direction for technology enhancement, development, and demonstrations that will lead to a reduction of technical uncertainties in EM waste processing activities. The current MYPP summarizes the strategic initiatives and the scope of the activities within each initiative that are proposed for the next five years (FY2008-2012) to improve safety and reduce costs and environmental impacts associated with waste processing; authorized budget levels will impact how much of the scope of activities can be executed, on a year-to-year basis. As a result of the importance of reducing technical risk and uncertainty in the EM Waste

  17. A roadmap for the integration of culture into developmental psychopathology.

    Science.gov (United States)

    Causadias, José M

    2013-11-01

    In this paper, I propose a roadmap for the integration of culture in developmental psychopathology. This integration is pressing because culture continues to be somewhat disconnected from theory, research, training, and interventions in developmental psychopathology, thus limiting our understanding of the epigenesis of mental health. I argue that in order to successfully integrate culture into developmental psychopathology, it is crucial to (a) study cultural development, (b) consider both individual-level and social-level cultural processes, (c) examine the interplay between culture and biology, and (d) promote improved and direct cultural assessment. I provide evidence in support of each of these guidelines, present alternative conceptual frameworks, and suggest new lines of research. Hopefully, that these directions will contribute to the emerging field of cultural development and psychopathology, which focuses on the elucidation of the cultural processes that initiate, maintain, or derail trajectories of normal and abnormal behavior.

  18. Hospital Based Health Technology Assessment: an example from Siena

    OpenAIRE

    Pietro Manzi; Pietro Barberini; Fabrizio Dori

    2015-01-01

    The Health Technology Assessment (HTA) has emerged in recent years as a useful tool in healthcare decision-making. It is a multidisciplinary process that summarizes information about the medical, social, economic and ethical issues related to the use of a health technology and provides evidence-based information on how to allocate resources. The experience of Siena University Hospital is an example of multidisciplinary hospital-based HTA. In the present paper we summarize the organization of ...

  19. Health Monitoring System Technology Assessments: Cost Benefits Analysis

    Science.gov (United States)

    Kent, Renee M.; Murphy, Dennis A.

    2000-01-01

    The subject of sensor-based structural health monitoring is very diverse and encompasses a wide range of activities including initiatives and innovations involving the development of advanced sensor, signal processing, data analysis, and actuation and control technologies. In addition, it embraces the consideration of the availability of low-cost, high-quality contributing technologies, computational utilities, and hardware and software resources that enable the operational realization of robust health monitoring technologies. This report presents a detailed analysis of the cost benefit and other logistics and operational considerations associated with the implementation and utilization of sensor-based technologies for use in aerospace structure health monitoring. The scope of this volume is to assess the economic impact, from an end-user perspective, implementation health monitoring technologies on three structures. It specifically focuses on evaluating the impact on maintaining and supporting these structures with and without health monitoring capability.

  20. Multi-Criteria Sustainability Assessment of Urban Sludge Treatment Technologies

    DEFF Research Database (Denmark)

    An, Da; Xi, Beidou; Ren, Jingzheng

    2017-01-01

    to determine the weights of the criteria for sustainability assessment, and extension theory was used to prioritize the alternative technologies for the treatment of urban sewage sludge and grade their sustainability performances. An illustrative case including three technologies (compositing, incineration......This study aims at developing a sustainability assessment framework for assessing the technologies for the treatment of urban sewage sludge based on the logarithmic fuzzy preference programming based fuzzy analytic hierarchy process (LFPPFAHP) and extension theory. LFPPFAHP was employed......, and resource utilization) was studied by the proposed method, and compositing, incineration, and resource utilization are recognized as "Moderately Sustainable", "Not Sustainable", and "Highly Sustainable", respectively. The sustainability sequence in the descending order is resource utilization, compositing...

  1. Assessing systemwide occupational health and safety risks of energy technologies

    International Nuclear Information System (INIS)

    Rowe, M.D.

    1982-01-01

    Input-output modelling is now being used to assess systemwide occupational and public health and safety risks of energy technologies. Some of the advantages and disadvantages of this method are presented and some of its important limitations are discussed. Its primary advantage is that it provides a standard method with which to compare technologies on a consistent basis without extensive economic analysis. Among the disadvantages are limited range of applicability, limited spectrum of health impacts, and inability to identify unusual health impacts unique to a new technology. (author)

  2. Assessment of a satellite power system and six alternative technologies

    Energy Technology Data Exchange (ETDEWEB)

    Wolsko, T.; Whitfield, R.; Samsa, M.; Habegger, L.S.; Levine, E.; Tanzman, E.

    1981-04-01

    The satellite power system is assessed in comparison to six alternative technologies. The alternatives are: central-station terrestrial photovoltaic systems, conventional coal-fired power plants, coal-gasification/combined-cycle power plants, light water reactor power plants, liquid-metal fast-breeder reactors, and fusion. The comparison is made regarding issues of cost and performance, health and safety, environmental effects, resources, socio-economic factors, and insitutional issues. The criteria for selecting the issues and the alternative technologies are given, and the methodology of the comparison is discussed. Brief descriptions of each of the technologies considered are included. (LEW)

  3. Sustainability assessment of renewable power and heat generation technologies

    International Nuclear Information System (INIS)

    Dombi, Mihály; Kuti, István; Balogh, Péter

    2014-01-01

    Rationalisation of consumption, more efficient energy usage and a new energy structure are needed to be achieved in order to shift the structure of energy system towards sustainability. The required energy system is among others characterised by intensive utilisation of renewable energy sources (RES). RES technologies have their own advantages and disadvantages. Nevertheless, for the strategic planning there is a great demand for the comparison of RES technologies. Furthermore, there are additional functions of RES utilisation expected beyond climate change mitigation, e.g. increment of employment, economic growth and rural development. The aim of the study was to reveal the most beneficial RES technologies with special respect to sustainability. Ten technologies of power generation and seven technologies of heat supply were examined in a multi-criteria sustainability assessment frame of seven attributes which were evaluated based on a choice experiment (CE) survey. According to experts the most important characteristics of RES utilisation technologies are land demand and social impacts i.e. increase in employment and local income generation. Concentrated solar power (CSP), hydropower and geothermal power plants are favourable technologies for power generation, while geothermal district heating, pellet-based non-grid heating and solar thermal heating can offer significant advantages in case of heat supply. - highlights: • We used choice experiment to estimate the weights of criteria for the sustainability assessment of RES technologies. • The most important attributes of RES technologies according to experts are land demand and social impacts. • Concentrated solar power (CSP), hydropower and geothermal power plants are advantageous technologies for power generation. • Geothermal district heating, pellet-based non-grid heating and solar thermal heating are favourable in case of heat supply

  4. Codes and standards research, development and demonstration roadmap

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2008-07-22

    C&S RD&D Roadmap - 2008: This Roadmap is a guide to the Research, Development & Demonstration activities that will provide data required for Standards Development Organizations (SDOs) to develop performance-based codes and standards for a commercial hydrogen fueled transportation sector in the U.S.

  5. Idaho National Engineering Laboratory installation roadmap document. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    1993-05-30

    The roadmapping process was initiated by the US Department of Energy`s office of Environmental Restoration and Waste Management (EM) to improve its Five-Year Plan and budget allocation process. Roadmap documents will provide the technical baseline for this planning process and help EM develop more effective strategies and program plans for achieving its long-term goals. This document is a composite of roadmap assumptions and issues developed for the Idaho National Engineering Laboratory (INEL) by US Department of Energy Idaho Field Office and subcontractor personnel. The installation roadmap discusses activities, issues, and installation commitments that affect waste management and environmental restoration activities at the INEL. The High-Level Waste, Land Disposal Restriction, and Environmental Restoration Roadmaps are also included.

  6. A quality roadmap of a restructured hospital.

    Science.gov (United States)

    Chow-Chua, C F; Goh, M

    1999-09-01

    This paper presents a quality roadmap of a restructured hospital. Specifically, a case study is showcased to reveal how a FOCUS-PDCA model is applied to the Central Portering Services (CPS) within a restructured hospital, to provide better service to other departments within the hospital who can then in turn value add to the patient care delivery chain. The preliminary results suggest that implementers of quality and service improvement programmes using the FOCUS-PDCA approach should note some of the key implementation difficulties. These difficulties occur at all levels and include issues relevant to change management, process improvement programmes, accessibility to data, communication and judicious execution of the change process.

  7. Challenges & Roadmap for Beyond CMOS Computing Simulation.

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigues, Arun F. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Frank, Michael P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-12-01

    Simulating HPC systems is a difficult task and the emergence of “Beyond CMOS” architectures and execution models will increase that difficulty. This document presents a “tutorial” on some of the simulation challenges faced by conventional and non-conventional architectures (Section 1) and goals and requirements for simulating Beyond CMOS systems (Section 2). These provide background for proposed short- and long-term roadmaps for simulation efforts at Sandia (Sections 3 and 4). Additionally, a brief explanation of a proof-of-concept integration of a Beyond CMOS architectural simulator is presented (Section 2.3).

  8. Successful user experience strategy and roadmaps

    CERN Document Server

    Rosenzweig, Elizabeth

    2015-01-01

    Successful User Experience: Strategy and Roadmaps provides you with a hands-on guide for pulling all of the User Experience (UX) pieces together to create a strategy that includes tactics, tools, and methodologies. Leveraging material honed in user experience courses and over 25 years in the field, the author explains the value of strategic models to refine goals against available data and resources. You will learn how to think about UX from a high level, design the UX while setting goals for a product or project, and how to turn that into concrete actionable steps. After reading this book, y

  9. Strategic Roadmap for the Development of an Interstellar Space Program

    Science.gov (United States)

    Gifra, M.; Peeters, W.

    Recent technological advances and scientific discoveries, particularly in astronomy and space technology, are opening our minds into the deepest realms of the universe, and also they are bringing a new era of space exploration and development. This sense of entering into a new era of space exploration is being boosted by the permanent discovery of new planets - to date, there are 684 confirmed extrasolar planets [1] - outside our solar system. The possibility that astronomers may soon find a habitable extrasolar planet near Earth and the recent advances in space propulsion that could reduce travel times have stimulated the space community to consider the development of an interstellar manned mission. But this scenario of entering into a new era of space development is ultimately contingent on the outcome of the actual world's economic crisis. The current financial crisis, on top of recent national and sovereign debts problems, could have serious consequences for space exploration and development as the national budgets for space activities are to freeze [2].This paper proposes a multi-decade space program for an interstellar manned mission. It designs a roadmap for the achievement of interstellar flight capability within a timeframe of 40 years, and also considers different scenarios where various technological and economical constraints are taken into account in order to know if such a space endeavour could be viable. It combines macro-level scenarios with a strategic roadmap to provide a framework for condensing all information in one map and timeframe, thus linking decision-making with plausible scenarios. The paper also explores the state of the art of space technologies 20 to 40 years in the future and its potential economic impact. It estimates the funding requirements, possible sources of funds, and the potential returns.The Interstellar Space Program proposed in this paper has the potential to help solve the global crisis by bringing a new landscape of

  10. Roadmap for Agriculture Biomass Feedstock Supply in the United States

    Energy Technology Data Exchange (ETDEWEB)

    J. Richard Hess; Thomas D. Foust; Reed Hoskinson; David Thompson

    2003-11-01

    The Biomass Research and Development Technical Advisory Committee established a goal that biomass will supply 5% of the nation’s power, 20% of its transportation fuels, and 25% of its chemicals by 2030. These combined goals are approximately equivalent to 30% of the country’s current petroleum consumption. The benefits of a robust biorefinery industry supplying this amount of domestically produced power, fuels, and products are considerable, including decreased demand for imported oil, revenue to the depressed agricultural industry, and revitalized rural economies. A consistent supply of highquality, low-cost feedstock is vital to achieving this goal. This biomass roadmap defines the research and development (R&D) path to supplying the feedstock needs of the biorefinery and to achieving the important national goals set for biomass. To meet these goals, the biorefinery industry must be more sustainable than the systems it will replace. Sustainability hinges on the economic profitability of all participants, on environmental impact of every step in the process, and on social impact of the product and its production. In early 2003, a series of colloquies were held to define and prioritize the R&D needs for supplying feedstock to the biorefinery in a sustainable manner. These colloquies involved participants and stakeholders in the feedstock supply chain, including growers, transporters, equipment manufacturers, and processors as well as environmental groups and others with a vested interest in ensuring the sustainability of the biorefinery. From this series of colloquies, four high-level strategic goals were set for the feedstock area: • Biomass Availability – By 2030, 1 billion dry tons of lignocellulosic feedstock is needed annually to achieve the power, fuel, and chemical production goals set by the Biomass Research and Development Technology Advisory Production Committee • Sustainability – Production and use of the 1 billion dry tons annually must be

  11. Acute Stroke Imaging Research Roadmap

    Science.gov (United States)

    Wintermark, Max; Albers, Gregory W.; Alexandrov, Andrei V.; Alger, Jeffry R.; Bammer, Roland; Baron, Jean-Claude; Davis, Stephen; Demaerschalk, Bart M.; Derdeyn, Colin P.; Donnan, Geoffrey A.; Eastwood, James D.; Fiebach, Jochen B.; Fisher, Marc; Furie, Karen L.; Goldmakher, Gregory V.; Hacke, Werner; Kidwell, Chelsea S.; Kloska, Stephan P.; Köhrmann, Martin; Koroshetz, Walter; Lee, Ting-Yim; Lees, Kennedy R.; Lev, Michael H.; Liebeskind, David S.; Ostergaard, Leif; Powers, William J.; Provenzale, James; Schellinger, Peter; Silbergleit, Robert; Sorensen, Alma Gregory; Wardlaw, Joanna; Wu, Ona; Warach, Steven

    2009-01-01

    The recent “Advanced Neuroimaging for Acute Stroke Treatment” meeting on September 7 and 8, 2007 in Washington DC, brought together stroke neurologists, neuroradiologists, emergency physicians, neuroimaging research scientists, members of the National Institute of Neurological Disorders and Stroke (NINDS), the National Institute of Biomedical Imaging and Bioengineering (NIBIB), industry representatives, and members of the US Food and Drug Administration (FDA) to discuss the role of advanced neuroimaging in acute stroke treatment. The goals of the meeting were to assess state-of-the-art practice in terms of acute stroke imaging research and to propose specific recommendations regarding: (1) the standardization of perfusion and penumbral imaging techniques, (2) the validation of the accuracy and clinical utility of imaging markers of the ischemic penumbra, (3) the validation of imaging biomarkers relevant to clinical outcomes, and (4) the creation of a central repository to achieve these goals. The present article summarizes these recommendations and examines practical steps to achieve them. PMID:18477656

  12. SETI 2020: a roadmap for future SETI observing projects

    Science.gov (United States)

    Tarter, Jill C.

    2001-08-01

    A recent series of workshops has laid out a roadmap for SETI research at the SETI Institute for the next few decades. Three different approaches were identified. 1) Continue the radio search: build an affordable array incorporating consumer market technologies, expand the search frequency, and increase the target list to 100,000 stars. This array will also serve as a technology demonstration and enable the international radio astronomy community to realize an array that is a hundred times larger and capable (among other things) of searching a million stars. 2) Begin searches for very fast optical pulses from a million stars. 3) As Moore's Law delivers increased computational capacity, build an omni-directional sky survey array capable of detecting strong, transient, radio signals from billions of stars. SETI could succeed tomorrow, or it may be an endeavor for multiple generations. We are a very young technology in a very old galaxy. While our own leakage radiation continues to outshine the Sun at many frequencies, we remain detectable to others. When our use of the spectrum becomes more efficient, it will be time to consider deliberate transmissions and the really tough questions: Who will speak for Earth? What will they say?

  13. Large Deployable Reflector (LDR) system concept and technology definition study. Volume 2: Technology assessment and technology development plan

    Science.gov (United States)

    Agnew, Donald L.; Jones, Peter A.

    1989-01-01

    A study was conducted to define reasonable and representative LDR system concepts for the purpose of defining a technology development program aimed at providing the requisite technological capability necessary to start LDR development by the end of 1991. This volume presents thirteen technology assessments and technology development plans, as well as an overview and summary of the LDR concepts. Twenty-two proposed augmentation projects are described (selected from more than 30 candidates). The five LDR technology areas most in need of supplementary support are: cryogenic cooling; astronaut assembly of the optically precise LDR in space; active segmented primary mirror; dynamic structural control; and primary mirror contamination control. Three broad, time-phased, five-year programs were synthesized from the 22 projects, scheduled, and funding requirements estimated.

  14. Integration of tablet technologies in the e-laboratory of cytology: a health technology assessment.

    Science.gov (United States)

    Giansanti, Daniele; Pochini, Marco; Giovagnoli, Maria Rosaria

    2014-10-01

    Although tablet systems are becoming a powerful technology, particularly useful in every application of medical imaging, to date no one has investigated the acceptance and performance of this technology in digital cytology. The specific aims of the work were (1) to design a health technology assessment (HTA) tool to assess, in terms of performance and acceptance, the introduction of tablet technologies (wearable, portable, and non portable) in the e-laboratories of cytology and (2) to test the tool in a first significant application of digital cytology. An HTA tool was proposed operating on a domain of five dimensions of investigation comprising the basic information of the product of digital cytology, the perceived subjective quality of images, the assessment of the virtual navigation on the e-slide, the assessment of the information and communication technologies features, and the diagnostic power. Six e-slides regarding studies of cervicovaginal cytology digitalized by means of an Aperio ( www.aperio.com ) scanner and uploaded onto the www.digitalslide.it Web site were used for testing the methodology on three different network connections. Three experts of cytology successfully tested the methodology on seven tablets found suitable for the study in their own standard configuration. Specific indexes furnished by the tool indicated both a high degree of performance and subjective acceptance of the investigated technology. The HTA tool thus could be useful to investigate new tablet technologies in digital cytology and furnish stakeholders with useful information that may help them make decisions involving the healthcare system. From a global point of view the study demonstrates the feasibility of using the tablet technology in digital cytology.

  15. The Contribution of Health Technology Assessment, Health Needs Assessment, and Health Impact Assessment to the Assessment and Translation of Technologies in the Field of Public Health Genomics

    DEFF Research Database (Denmark)

    Rosenkotter, N.; Vondeling, H.; Blancquaert, I.

    2011-01-01

    or to identify infrastructural needs. HIA delivers information on the impact of technologies in a wider scope and promotes informed decision making. HTA, HNA and HIA provide a partly overlapping and partly unique set of methodologies and infrastructure for the translation and assessment of genomic health...

  16. The NICE ADHD health technology assessment: A review and critique

    Directory of Open Access Journals (Sweden)

    Schlander Michael

    2008-01-01

    Full Text Available Abstract Background Health technology assessments (HTAs by the National Institute for Health and Clinical Excellence (NICE enjoy high levels of international attention. The present analysis addresses NICE's appraisal of methylphenidate, atomoxetine and dexamphetamine for attention-deficit/hyperactivity disorder (ADHD in children and adolescents, published in March 2006. Methods A qualitative study of NICE Technology Appraisal No. 98 was done focusing on the >600-page technology assessment report, which aimed at evaluating ADHD treatment strategies by a clinical effectiveness review and an economic analysis using meta-analytical techniques and a cost-effectiveness model. Results The technology assessment was unable to differentiate between the various drugs in terms of efficacy, and its economic model was ultimately driven by cost differences. While the assessment concluded that the economic model "clearly identified an optimal treatment strategy" with first-line dexamphetamine, the NICE appraisal committee subsequently found it impossible to distinguish between the different strategies on grounds of cost-effectiveness. Analyzing the assessment reveals gaps and inconsistencies concerning data selection (ultimately relying on a small number of short-term studies only, data synthesis (pooling of heterogeneous study designs and clinical endpoints, and economic model structure (identifying double-counting of nonresponders as a likely source of bias, alongside further methodological anomalies. Conclusion Many conclusions of the NICE technology assessment rest on shaky grounds. There remains a need for a new, state-of-the-art systematic review of ADHD treatment strategies including economic evaluation, which ideally should address outcomes beyond children's health-related quality of life, such as long-term sequelae of the disorder and caregiver burden.

  17. DECISION ANALYSIS AND TECHNOLOGY ASSESSMENTS FOR METAL AND MASONRY DECONTAMINATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian, Ph.D.

    1999-01-01

    The purpose of this investigation was to conduct a comparative analysis of innovative technologies for the non-aggressive removal of coatings from metal and masonry surfaces and the aggressive removal of one-quarter to one-inch thickness of surface from structural masonry. The technologies tested should be capable of being used in nuclear facilities. Innovative decontamination technologies are being evaluated under standard, non-nuclear conditions at the FIU-HCET technology assessment site in Miami, Florida. This study is being performed to support the OST, the Deactivation and Decommissioning (D&D) Focus Area, and the environmental restoration of DOE facilities throughout the DOE complex by providing objective evaluations of currently available decontamination technologies.

  18. DECISION ANALYSIS AND TECHNOLOGY ASSESSMENTS FOR METAL AND MASONRY DECONTAMINATION TECHNOLOGIES

    International Nuclear Information System (INIS)

    Ebadian, M.A.

    1999-01-01

    The purpose of this investigation was to conduct a comparative analysis of innovative technologies for the non-aggressive removal of coatings from metal and masonry surfaces and the aggressive removal of one-quarter to one-inch thickness of surface from structural masonry. The technologies tested should be capable of being used in nuclear facilities. Innovative decontamination technologies are being evaluated under standard, non-nuclear conditions at the FIU-HCET technology assessment site in Miami, Florida. This study is being performed to support the OST, the Deactivation and Decommissioning (D and D) Focus Area, and the environmental restoration of DOE facilities throughout the DOE complex by providing objective evaluations of currently available decontamination technologies

  19. Technology and Economic Assessment of Innovative Field Drainage Technologies in Denmark

    DEFF Research Database (Denmark)

    Gachango, Florence Gathoni

    proposed as appropriate solutions to this problem in the Danish context. The feasibility of these technologies with regards to their cost-effectiveness in nutrient mitigation, farmers’ adoption behavior, and environmental policy implementation is assessed in this thesis. The thesis comprises of four papers...... based on survey and case-farms data and utilizes a mix of quantitative and qualitative methods to investigate: i) the farmers’ perception of water quality and their adoption behavior with respect to voluntary nutrient reduction technologies, ii) the farmers willingness to adopt constructed wetland...... technologies, and their willingness and extent of trading-off the existing farm management nutrient reduction measures with constructed wetland technology, iii) the cost-effectiveness of surface flow constructed wetlands, and iv) the strategies of incorporating the filter technologies into policy measures...

  20. Health technology assessment, value-based decision making, and innovation.

    Science.gov (United States)

    Henshall, Chris; Schuller, Tara

    2013-10-01

    Identifying treatments that offer value and value for money is becoming increasingly important, with interest in how health technology assessment (HTA) and decision makers can take appropriate account of what is of value to patients and to society, and in the relationship between innovation and assessments of value. This study summarizes points from an Health Technology Assessment International (HTAi) Policy Forum discussion, drawing on presentations, discussions among attendees, and background papers. Various perspectives on value were considered; most place patient health at the core of value. Wider elements of value comprise other benefits for: patients; caregivers; the health and social care systems; and society. Most decision-making systems seek to take account of similar elements of value, although they are assessed and combined in different ways. Judgment in decisions remains important and cannot be replaced by mathematical approaches. There was discussion of the value of innovation and of the effects of value assessments on innovation. Discussion also included moving toward "progressive health system decision making," an ongoing process whereby evidence-based decisions on use would be made at various stages in the technology lifecycle. Five actions are identified: (i) development of a general framework for the definition and assessment of value; development by HTA/coverage bodies and regulators of (ii) disease-specific guidance and (iii) further joint scientific advice for industry on demonstrating value; (iv) development of a framework for progressive licensing, usage, and reimbursement; and (v) promoting work to better adapt HTA, coverage, and procurement approaches to medical devices.