Identifying and Assessing Life-Cycle-Related Critical Technology Elements (CTEs) for Technology Readiness Assessments (TRAs)

National Research Council Canada - National Science Library

Mandelbaum, Jay

2006-01-01

.... Because these technologies are not emphasized in the current Technology Readiness Assessment (TRA) process this document is intended to improve the focus on life-cycle-related technologies in TRAs...

The BERG faculty students readiness for information technologies study

Directory of Open Access Journals (Sweden)

Horovèák Pavel

2002-12-01

Full Text Available The contribution deals with the reconnaissance of our students’ readiness to study information technologies, its interpretation, comparison with some published data as well as with a completion and evaluation of the reconnaissance. It specifies methods and processes of evaluation, structure, sections and questions of the reconnaissance. The reconnaissance was oriented particularly to the evaluation of knowledge in the information technologies area acquired at secondary schools. It was completed in a classical paper form as a preparation for the realization and utilization of questionnaire in the electronic form. The following is constructed using modern internet and database technologies and presents extensive possibilities of evaluation answers respondents. The results of the reconnaissance are presented in the form distribution (sex, domicile, secondary school, secondary school influence, work with a computer, operating and exploitation of internet technologies, familiarity with operating systems and typical applications software and programming languages as well as the interest in information technologies of respondents. The results are compared with some other published data and future perspectives of completion and its evaluation of completion are outlined.

In-Space Propulsion Technology Products Ready for Infusion on NASA's Future Science Missions

Science.gov (United States)

Anderson, David J.; Pencil, Eric; Peterson, Todd; Dankanich, John; Munk, Michele M.

2012-01-01

Since 2001, the In-Space Propulsion Technology (ISPT) program has been developing and delivering in-space propulsion technologies that will enable or enhance NASA robotic science missions. These in-space propulsion technologies are applicable, and potentially enabling, for future NASA flagship and sample return missions currently being considered. They have a broad applicability to future competed mission solicitations. The high-temperature Advanced Material Bipropellant Rocket (AMBR) engine, providing higher performance for lower cost, was completed in 2009. Two other ISPT technologies are nearing completion of their technology development phase: 1) NASA s Evolutionary Xenon Thruster (NEXT) ion propulsion system, a 0.6-7 kW throttle-able gridded ion system; and 2) Aerocapture technology development with investments in a family of thermal protection system (TPS) materials and structures; guidance, navigation, and control (GN&C) models of blunt-body rigid aeroshells; aerothermal effect models; and atmospheric models for Earth, Titan, Mars and Venus. This paper provides status of the technology development, applicability, and availability of in-space propulsion technologies that have recently completed their technology development and will be ready for infusion into NASA s Discovery, New Frontiers, SMD Flagship, or technology demonstration missions.

Teaching via Mobile Phone: a Case Study on Malaysian Teachers’ Technology Acceptance and Readiness

Directory of Open Access Journals (Sweden)

Issham Ismail

2013-01-01

Full Text Available The purpose of this study is to identify the level of technology acceptance among school teachers from the components of awareness and motivation, training and courses, training design, and supports and facilities. This study also aims to investigate whether teachers’ acceptance of technology could influence their readiness for the pedagogical use of mobile phone technology if it is to be implemented in school. A quantitative questionnaire was administered to thirty eight teachers who teach Information and Technology (IT subject from different primary schools in Penang, Malaysia during a program on Teachers’ Development. Data revealed that the level of technology acceptance among respondents in terms of awareness and motivation, training and courses, training design and supports and facilities was generally high. Despite this positive acceptance of technology, teachers’ readiness for the use of mobile phone in teaching and learning was found to be at a considerably low level. However, the study identified a significant correlation between respondents’ awareness and motivation towards technology with their readiness for the pedagogical usage of mobile phone. It was also found that gender is a possible factor influencing the respondents’ readiness. As implication, this paper probes the influence of technology acceptance on teachers’ readiness for the pedagogical usage of mobile phone and the possible implications this influence affords.

Predictors of Osteopathic Medical Students' Readiness to Use Health Information Technology.

Science.gov (United States)

Jacobs, Robin J; Iqbal, Hassan; Rana, Arif M; Rana, Zaid; Kane, Michael N

2017-12-01

The advent of health information technology (HIT) tools can affect the practice of modern medicine in many ways, ideally by improving quality of care and efficiency and reducing medical errors. Future physicians will play a key role in the successful implementation of HIT. However, osteopathic medical students' willingness to learn, adopt, and use technology in a health care setting is not well understood. To understand osteopathic medical students' knowledge, attitudes, and behaviors regarding HIT and to identify factors that may be related to their readiness to use HIT. Using a cross-sectional approach, quantitative surveys were collected from students attending a large osteopathic medical school. Multivariate regression modeling was used to determine whether knowledge, attitudes, behaviors, and personal characteristics were associated with students' readiness to use HIT in future clinical practice. Six hundred four students responded to at least 70% of the survey and were included in the analysis. Multivariate modeling successfully explained the 26% of variance in predicting students' readiness to use HIT (F8,506=22.6, Ptechnology use, younger age, being male, and prior exposure to technology were associated with readiness to use HIT. Understanding students' level of HIT readiness may help guide medical education intervention efforts to better prepare future osteopathic physicians for HIT engagement and use. Innovative approaches to HIT education in medical school curricula that include biomedical informatics may be necessary.

Readiness Factors and Consumer Acceptance of Technology in Mobile Telephony

Directory of Open Access Journals (Sweden)

Lucilla Andrade Sousa Cunha

2014-06-01

Full Text Available This study aims at analyzing the variables of use and contact of users regarding to products and services of mobile phone technology. Technological innovation stands in the enterprise, enabling growth and creation of new products and services. In the theoretical framework, we used the technology readiness model, from users beliefs and feelings represented by four dimensions: optimism, innovativeness, discomfort and insecurity. It also highlights the technology acceptance model and presents two important constructs as perceived usefulness and ease of use. In short, the factors that support the technology readiness model could be preceding the technology acceptance model. To conduct this study, a field survey of students at the Federal University of Uberlândia / Campus FACIP was carried out. Results indicate optimism as the main factor to accept new mobile technology, due to the fact that the mobile devices provide benefits to people's lives and prompt them a positive attitude toward mobile technology. The perception of the user to purchase a mobile device is directly related to its usefulness and ease of handling of the technology.

NASA Technology Readiness Level Definitions

Science.gov (United States)

Mcnamara, Karen M.

2012-01-01

This presentation will cover the basic Technology Readiness Level (TRL) definitions used by the National Aeronautics and Space Administration (NASA) and their specific wording. We will discuss how they are used in the NASA Project Life Cycle and their effectiveness in practice. We'll also discuss the recent efforts by the International Standards Organization (ISO) to develop a broadly acceptable set of TRL definitions for the international space community and some of the issues brought to light. This information will provide input for further discussion of the use of the TRL scale in manufacturing.

Factors Affecting Nursing Students' Readiness and Perceptions Toward the Use of Mobile Technologies for Learning.

Science.gov (United States)

Zayim, Nese; Ozel, Deniz

2015-10-01

The purpose of this study was to determine the current usage of mobile devices, preferences of mobile learning environments and examine the readiness of nursing students in a public university. In order to investigate preferences and attitudes with respect to mobile technology use in nursing education, 387 students at a state university have been surveyed. It has been observed that while students preferred their current portable laptops, those in higher classes were more inclined to favor mobile phones. The common problems of battery life and high cost of communication, both in smartphones and tablet systems, suggest that hardware quality and financial constraints seem to be two main factors in determining these technologies. While more than half of students expressed readiness for mobile learning, one quarter indicated indecision. Through multivariate regression analysis, readiness to use mobile learning can be described in terms of perceived ease of use, perceived usefulness, personal innovativeness, self-management of learning, perceived device limitation, and availability. Class level, perceived ease of use, personal innovativeness, and self-management of learning explain intention to use mobile learning. Findings obtained from these results can provide guidance in the development and application of mobile learning systems.

Future Ready Learning: Reimagining the Role of Technology in Education. 2016 National Education Technology Plan

Science.gov (United States)

Thomas, Susan

2016-01-01

The National Education Technology Plan is the flagship educational technology policy document for the United States. The 2016 Plan, "Future Ready Learning: Reimagining the Role of Technology in Education," articulates a vision of equity, active use, and collaborative leadership to make everywhere, all-the-time learning possible. While…

Timing Is everything: quantifying regulatory and market readiness levels for technology transition policy analysis

Energy Technology Data Exchange (ETDEWEB)

Kobos, Peter Holmes [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Malczynski, Leonard A. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Walker, La Tonya Nicole [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Borns, David James [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)

2014-03-01

People save for retirement throughout their career because it is virtually impossible to save all you’ll need in retirement the year before you retire. Similarly, without installing incremental amounts of clean fossil, renewable or transformative energy technologies throughout the coming decades, a radical and immediate change will be near impossible the year before a policy goal is set to be in place. This notion of steady installation growth over acute installations of technology to meet policy goals is the core topic of discussion for this research. This research operationalizes this notion by developing the theoretical underpinnings of regulatory and market acceptance delays by building upon the common Technology Readiness Level (TRL) framework and offers two new additions to the research community. The new and novel Regulatory Readiness Level (RRL) and Market Readiness Level (MRL) frameworks were developed. These components, collectively called the Technology, Regulatory and Market (TRM) readiness level framework allow one to build new constraints into existing Integrated Assessment Models (IAMs) to address research questions such as, ‘To meet our desired technical and policy goals, what are the factors that affect the rate we must install technology to achieve these goals in the coming decades?’

Testing of technology readiness index model based on exploratory factor analysis approach

Science.gov (United States)

Ariani, AF; Napitupulu, D.; Jati, RK; Kadar, JA; Syafrullah, M.

2018-04-01

SMEs readiness in using ICT will determine the adoption of ICT in the future. This study aims to evaluate the model of technology readiness in order to apply the technology on SMEs. The model is tested to find if TRI model is relevant to measure ICT adoption, especially for SMEs in Indonesia. The research method used in this paper is survey to a group of SMEs in South Tangerang. The survey measures the readiness to adopt ICT based on four variables which is Optimism, Innovativeness, Discomfort, and Insecurity. Each variable contains several indicators to make sure the variable is measured thoroughly. The data collected through survey is analysed using factor analysis methodwith the help of SPSS software. The result of this study shows that TRI model gives more descendants on some indicators and variables. This result can be caused by SMEs owners’ knowledge is not homogeneous about either the technology that they are used, knowledge or the type of their business.

Students’ Readiness for E-learning Application in Higher Education

Directory of Open Access Journals (Sweden)

Atousa Rasouli

2016-07-01

Full Text Available The main goal of this research was to investigate the readiness of art students in applying e-learning. This study adopted a survey research design. From three public Iranian Universities (Alzahra, Tarbiat Modares, and Tehran, 347 students were selected by multistage cluster sampling and via Morgan Table. Their readiness for E-learning application was assessed by a self-developed questionnaire. Data analysis was done by indexes of descriptive statistics and one sample t-test. Analysis of results found a significant relationship between the readiness of undergraduate students, graduate students, and post-graduate students to apply E-learning, but there was no significant relationship between students’ readiness and gender, university, and subject. Results revealed that Art students were in a moderate level of readiness for applying E-learning.

Technology readiness levels for the new millennium program

Science.gov (United States)

Moynihan, P. I.; Minning, C. P.; Stocky, J. F.

2003-01-01

NASA's New Millennium Program (NMP) seeks to advance space exploration by providing an in-space validating mechanism to verify the maturity of promising advanced technologies that cannot be adequately validated with Earth-based testing alone. In meeting this objective, NMP uses NASA Technology Readiness Levels (TRL) as key indicators of technology advancement and assesses development progress against this generalized metric. By providing an opportunity for in-space validation, NMP can mature a suitable advanced technology from TRL 4 (component and/or breadboard validation in laboratory environment) to a TRL 7 (system prototype demonstrated in an Earth-based space environment). Spaceflight technology comprises a myriad of categories, types, and functions, and as each individual technology emerges, a consistent interpretation of its specific state of technological advancement relative to other technologies is problematic.

Defining the Application Readiness of Products when Developing Earth Observing Remote Sensing Data Products

Science.gov (United States)

Escobar, V. M.

2017-12-01

Satellite remote sensing technology has contributed to the transformation of multiple earth science domains, putting space observations at the forefront of innovation in Earth Science. With new satellite missions being launched every year, new types of Earth Science data are being incorporated into science models and decision-making systems in a broad array of organizations. These applications help hazard mitigation and decision-making in government, private, and civic institutions working to reduce its impact on human wellbeing. Policy guidance and knowledge of product maturity can influence mission design as well as development of product applications in user organizations. Ensuring that satellite missions serve both the scientific and user communities without becoming unfocused and overly expensive is a critical outcome from engagement of user communities. Tracking the applications and product maturity help improve the use of data. NASA's Applications Readiness Levels reduce cost and increase the confidence in applications. ARLs help identify areas where NASA products are most useful while allowing the user to leverage products in early development as well as those ready for operational uses. By considering the needs of the user community early on in the mission-design process, agencies can use ARLs to ensure that satellites meet the needs of multiple constituencies and the development of products are integrated into user organizations organically. ARLs and user integration provide a perspective on the maturity and readiness of a products ability to influence policy and decision-making. This paper describes the mission application development process at NASA and within the Earth Science Directorate. We present the successes and challenges faced by NASA data users and explain how ARLs helps link NASA science to the appropriate policies and decision frameworks. The methods presented here can be adapted to other programs and institutions seeking to rapidly move

Survey on the Technology Readiness Level of R and D projects for a Technical Risk Management

International Nuclear Information System (INIS)

Song, S. J.; Chang, J.; Lee, K. Y.

2008-01-01

The purpose of applying the Technology Readiness Level/Design Readiness Level (TRL/DRL) in technical risk management is to make technology assessments, and improve communication among researchers with a consistent, systematic technology readiness Technical risk management for the Nuclear Hydrogen Production project was adopted of experience assessed with Delphi Method from the Next Generation Nuclear Plant(NGNP)of the DOE to improve the poor contactor management of the major projects which experienced cost increases and/or schedule delays in long-term. In the current phase that is doing key technology research and development projects, the technology readiness level was reviewed and applied to the Nuclear Hydrogen Production project to prepare an input for the next design phases. Based on the previous works, pre-conceptional design and key R and D works for the Nuclear Hydrogen Design and Development(NHDD) projects and the results of key research and development projects, the TRL was applied to assess the levels and compared with the advanced design stages of Westinghouse Electric Co. With this process, several issues were identified to apply the design and technology level to the familiar steps of design process and research and development projects. In order to resolve these issues, it is needed to systematically adjust and modify the current process with TRLs

Integrating technology readiness into the expectation-confirmation model: an empirical study of mobile services.

Science.gov (United States)

Chen, Shih-Chih; Liu, Ming-Ling; Lin, Chieh-Peng

2013-08-01

The aim of this study was to integrate technology readiness into the expectation-confirmation model (ECM) for explaining individuals' continuance of mobile data service usage. After reviewing the ECM and technology readiness, an integrated model was demonstrated via empirical data. Compared with the original ECM, the findings of this study show that the integrated model may offer an ameliorated way to clarify what factors and how they influence the continuous intention toward mobile services. Finally, the major findings are summarized, and future research directions are suggested.

Production technology readiness assessment of surfactant in the research center for Chemistry-Indonesian Institute of Sciences

Science.gov (United States)

Setiawan, Arief Ameir Rahman; Sulaswatty, Anny

2017-11-01

The common problem faced by the institution working on research, innovation and technology development is lack of quantitative measures to determine the technology readiness of research. No common communication language between R & D Institutions and industry about the level of preparedness of a research resulting a barrier to technology diffusion interaction. This lack of connection between R & D institutes with industry may lead to "sluggishness" occurs in innovating. For such circumstance, assessing technology readiness of research is very important. One of wide spread methods for the assessment is Technology Readiness Level (TRL, also known as Technometer), which is introduced by NASA (National Aeronautics and Space Administration). TRL is a general guide that provides an overview of maturity level of a technology. This study aims to identify and demonstrate the implementation of TRL to assess a number of surfactant researches in the Research Center for Chemistry, Indonesian Institute of Sciences. According to the assessment, it has been obtained the surfactant recommended for further development towards commercialization of R & D results, i.e. Glycerol Mono Stearate (GMS), which has reached the level of TRL 7.

SEWGS Technology is Now Ready for Scale-up

Energy Technology Data Exchange (ETDEWEB)

Jansen, D.; Van Selow, E.; Cobden, P. [Energy research Centre of the Netherlands ECN (Netherlands); Manzolini, G.; Macchi, E.; Gazzani, M. [Politecnico di Milano PTM, Dipartimento di Energia (Italy); Blom, R.; Henriksen, P.P. [SINTEF, Trondheim (Norway); Beavis, R. [BP Alternative Energy (United Kingdom); Wright, A. [Air products PLC (United Kingdom)

2013-07-01

In the FP7 project CAESAR, Air Products, BP, ECN, SINTEF and Politecnico di Milano worked together in the further development of the SEWGS process with the objective to reduce the energy penalty and the costs per ton of CO2 avoided to less than 25 euro through optimization of sorbent materials, reactor and process design and smart integration of the SEWGS unit in a combined cycle power plant. The most promising applications for the SEWGS technology are IGCC power plants and in combined cycles power plants fuelled with blast furnace top gas. Extensive sorbent development work resulted in a new sorbent called ALKASORB+ with a high capacity resulting in cost of CO2 avoided for the IGCC application of 23 euro. This is a reduction of almost 40% compared to the Selexol capture case. Since ALKASORB+ requires much less steam in the regeneration, the specific primary energy consumption is reduced to 44% below the specific energy consumption for the Selexol (2.08 versus 3.71 MJLHV/kgCO2). From a technical point of view SEWGS is ready to move to the next development level, which is a pilot plant installation with a capacity of 35 ton CO2 per day. This is over 500 times larger than the current ECN's multi column SEWGS installation, but still 50 times smaller than an envisaged commercial scale installation. The pilot plant will prove the technology under field conditions and at a sufficiently large scale to enable further up-scaling, delivering both the basic design and investment costs of a full scale SEWGS demonstration plant.

An Assessment of the Technical Readiness of the Vapor Phase Catalytic Ammonia Removal Process (VPCAR) Technology

Science.gov (United States)

Flynn, Michael

2000-01-01

This poster provides an assessment of the technical readiness of the Vapor Phase Catalytic Ammonia Removal Process (VPCAR). The VPCAR technology is a fully regenerative water recycling technology designed specifically for applications such as a near term Mars exploration mission. The VPCAR technology is a highly integrated distillation/catalytic oxidation based water processor. It is designed to accept a combined wastewater stream (urine, condensate, and hygiene) and produces potable water in a single process step which requires -no regularly scheduled re-supply or maintenance for a 3 year mission. The technology is designed to be modular and to fit into a volume comparable to a single International Space Station Rack (when sized for a crew of 6). This poster provides a description of the VPCAR technology and a summary of the current performance of the technology. Also provided are the results of two separate NASA sponsored system trade studies which investigated the potential payback of further development of the VPCAR technology.

Exploring Instructors' Technology Readiness, Attitudes and Behavioral Intentions towards E-Learning Technologies in Egypt and United Arab Emirates

Science.gov (United States)

El Alfy, Shahira; Gómez, Jorge Marx; Ivanov, Danail

2017-01-01

This paper explores the association between technology readiness, (a meta-construct consisting of optimism, innovativeness, discomfort, and insecurity), attitude, and behavioral intention towards e-learning technologies adoption within an education institution context. The empirical study data is collected at two private universities located in…

The Sandia MEMS Passive Shock Sensor : FY08 testing for functionality, model validation, and technology readiness.

Energy Technology Data Exchange (ETDEWEB)

Walraven, Jeremy Allen; Blecke, Jill; Baker, Michael Sean; Clemens, Rebecca C.; Mitchell, John Anthony; Brake, Matthew Robert; Epp, David S.; Wittwer, Jonathan W.

2008-10-01

This report summarizes the functional, model validation, and technology readiness testing of the Sandia MEMS Passive Shock Sensor in FY08. Functional testing of a large number of revision 4 parts showed robust and consistent performance. Model validation testing helped tune the models to match data well and identified several areas for future investigation related to high frequency sensitivity and thermal effects. Finally, technology readiness testing demonstrated the integrated elements of the sensor under realistic environments.

The Perceptions of Change and Change Readiness in Junior and Senior Engineering & Technology Students

Science.gov (United States)

Moler, Perry J.

The purpose of this study was to understand what perceptions junior and senior engineering & technology students have about change, change readiness, and selected attributes, skills, and abilities. The selected attributes, skills, and abilities for this study were lifelong learning, leadership, and self-efficacy. The business environment of today is dynamic, with any number of internal and external events requiring an organization to adapt through the process of organizational development. Organizational developments affect businesses as a whole, but these developments are more evident in fields related to engineering and technology. Which require employees working through such developments be flexible and adaptable to a new professional environment. This study was an Explanatory Sequential Mixed Methods design, with Stage One being an online survey that collected individuals' perceptions of change, change readiness, and associated attributes, skills, and abilities. Stage Two was a face-to-face interview with a random sample of individuals who agreed to be interviewed in Stage One. This process was done to understand why students' perceptions are what they are. By using a mixed-method study, a more complete understanding of the current perceptions of students was developed, thus allowing external stakeholders' such as Human Resource managers more insight into the individuals they seek to recruit. The results from Stage One, one sample T-test with a predicted mean of 3.000 for this study indicated that engineering & technology students have a positive perceptions of Change Mean = 3.7024; Change Readiness Mean = 3.9313; Lifelong Learning Mean = 4.571; Leadership = 4.036; and Self-Efficacy Mean = 4.321. A One-way ANOVA was also conducted to understand the differences between traditional and non-traditional student regarding change and change readiness. The results of the ANOVA test indicated there were no significant differences between these two groups. The results

Development of the PRE-HIT instrument: patient readiness to engage in health information technology.

Science.gov (United States)

Koopman, Richelle J; Petroski, Gregory F; Canfield, Shannon M; Stuppy, Julie A; Mehr, David R

2014-01-28

Technology-based aids for lifestyle change are becoming more prevalent for chronic conditions. Important "digital divides" remain, as well as concerns about privacy, data security, and lack of motivation. Researchers need a way to characterize participants' readiness to use health technologies. To address this need, we created an instrument to measure patient readiness to engage with health technologies among adult patients with chronic conditions. Initial focus groups to determine domains, followed by item development and refinement, and exploratory factor analysis to determine final items and factor structure. The development sample included 200 patients with chronic conditions from 6 family medicine clinics. From 98 potential items, 53 best candidate items were examined using exploratory factor analysis. Pearson's Correlation for Test/Retest reliability at 3 months. The final instrument had 28 items that sorted into 8 factors with associated Cronbach's alpha: 1) Health Information Need (0.84), 2) Computer/Internet Experience (0.87), 3) Computer Anxiety (0.82), 4) Preferred Mode of Interaction (0.73), 5) Relationship with Doctor (0.65), 6) Cell Phone Expertise (0.75), 7) Internet Privacy (0.71), and 8) No News is Good News (0.57). Test-retest reliability for the 8 subscales ranged from (0.60 to 0.85). The Patient Readiness to Engage in Health Internet Technology (PRE-HIT) instrument has good psychometric properties and will be an aid to researchers investigating technology-based health interventions. Future work will examine predictive validity.

Getting America Ready for Japanese Science and Technology Held at Washington, DC on 7-8 February 1985.

Science.gov (United States)

1985-05-15

includes an introduction to Japanese grammar, practice in elemen- tary conversation, thorough mastery of hiragana aia! katakana, an introduction to...7RD-RI57 599 GETTING AMERICA READY FOR JAPANESE SCIENCE AND 1/3IN ER ATIONAL CENTER FOR SCHOLARS WASHINGTONCNLG HEDA AHN U O D .. ILUNCRS IFID RA...GETTING AMERICA READY FOR JAPANESE SCIENCE AND TECHNOLOGY ___ yjL ASIA PROG3RAM OF THE WILSON CENTER THE MIT-.JAPAN SCIENCE AND TECHNOLOGY PROGRAM

Application of RFID combined with blockchain technology in logistics of construction materials

Directory of Open Access Journals (Sweden)

Lanko A.

2018-01-01

Full Text Available Nowadays, almost none of the fields of human activity can do without supply chain management. In addition, implementation of one in construction companies contributes to major economic benefits. The article considers the application feasibility of blockchain in logistics of construction materials through the usage of RFID technology. An example of introduction to the process of manufacturing and delivery of ready-mixed concrete is given. The main advantages, shortcomings, perspectives, as well as difficulties arising in the implementation of blockchain technology in the construction industry are described. Special attention is paid to the applicability of these technologies.

Teaching via Mobile Phone: A Case Study on Malaysian Teachers' Technology Acceptance and Readiness

Science.gov (United States)

Ismail, Issham; Bokhare, Siti F.; Azizan, Siti N.; Azman, Nizuwan

2013-01-01

The purpose of this study is to identify the level of technology acceptance among school teachers from the components of awareness and motivation, training and courses, training design, and supports and facilities. This study also aims to investigate whether teachers' acceptance of technology could influence their readiness for the pedagogical use…

'Capture ready' regulation of fossil fuel power plants - Betting the UK's carbon emissions on promises of future technology

International Nuclear Information System (INIS)

Markusson, Nils; Haszeldine, Stuart

2010-01-01

Climate change legislation requires emissions reductions, but the market shows interest in investing in new fossil fuelled power plants. The question is whether capture ready policy can reconcile these interests. The term 'capture ready' has been used a few years by the UK Government when granting licences for fossil fuelled power plants, but only recently has the meaning of the term been defined. The policy has been promoted as a step towards CCS and as an insurance against carbon lock-in. This paper draws on literature on technology lock-in and on regulation of technology undergoing development. Further, versions of the capture readiness concept proposed to date are compared. Capture readiness requirements beyond the minimum criterion of space on the site for capture operations are explored. This includes integration of capture and power plant, downstream operations, overall system integration and regulation of future retrofitting. Capture readiness comes with serious uncertainties and is no guarantee that new-built fossil plants will be abatable or abated in the future. As a regulatory strategy, it has been over-promised in the UK.

The Ef fects of Technology Usabilitiy and Individual Technology Readiness on Utilization of Electronic Document Management System (EDMS: A Research on Employee of University Hospital

Directory of Open Access Journals (Sweden)

Asuman Atilla

2015-06-01

Full Text Available Electronic Document Management System (EDMS is software which is utilized for writing, sending and storing, briefly managing the processes and operations of the corporations and institutions. In this empirical research, the statistical differences are investigated between users’ concerns about usability of mentioned technology, users’ technological readiness levels and users’ utilization status of EDMS sample is formed by 189 administrative staff of a university hospital in Ankara. According to findings, significant statistical differences are found between some dimensions of technology usability (usability effectiveness, learnability,helpfulness satisfaction, some dimensions of technology readiness (discomfort and insecurity and the utilization status (user, nonuser of EDMS.

Influence of Transformational Leadership Style on Decision-Making Style and Technology Readiness: A Correlation Study

Science.gov (United States)

Mueller, Crystal A.

2009-01-01

The research addressed the problem of technology initiatives failing to meet organizational objectives. The purpose of the quantitative correlation study was to determine the relationship between transformational leadership styles, decision-making styles, and technology readiness. The findings of the study answered research questions in three…

Solar Sail Propulsion Technology Readiness Level Database

Science.gov (United States)

Adams, Charles L.

2004-01-01

The NASA In-Space Propulsion Technology (ISPT) Projects Office has been sponsoring 2 solar sail system design and development hardware demonstration activities over the past 20 months. Able Engineering Company (AEC) of Goleta, CA is leading one team and L Garde, Inc. of Tustin, CA is leading the other team. Component, subsystem and system fabrication and testing has been completed successfully. The goal of these activities is to advance the technology readiness level (TRL) of solar sail propulsion from 3 towards 6 by 2006. These activities will culminate in the deployment and testing of 20-meter solar sail system ground demonstration hardware in the 30 meter diameter thermal-vacuum chamber at NASA Glenn Plum Brook in 2005. This paper will describe the features of a computer database system that documents the results of the solar sail development activities to-date. Illustrations of the hardware components and systems, test results, analytical models, relevant space environment definition and current TRL assessment, as stored and manipulated within the database are presented. This database could serve as a central repository for all data related to the advancement of solar sail technology sponsored by the ISPT, providing an up-to-date assessment of the TRL of this technology. Current plans are to eventually make the database available to the Solar Sail community through the Space Transportation Information Network (STIN).

Magnetic fusion: Environmental Readiness Document

International Nuclear Information System (INIS)

1981-03-01

Environmental Readiness Documents are prepared periodically to review and evaluate the environmental status of an energy technology during the several phases of development of that technology. Through these documents, the Office of Environment within the Department of Energy provides an independent and objective assessment of the environmental risks and potential impacts associated with the progression of the technology to the next stage of development and with future extensive use of the technology. This Environmental Readiness Document was prepared to assist the Department of Energy in evaluating the readiness of magnetic fusion technology with respect to environmental issues. An effort has been made to identify potential environmental problems that may be encountered based upon current knowledge, proposed and possible new environmental regulations, and the uncertainties inherent in planned environmental research

Baby Boomers’ Adoption of Consumer Health Technologies: Survey on Readiness and Barriers

OpenAIRE

LeRouge, Cynthia; Van Slyke, Craig; Seale, Deborah; Wright, Kevin

2014-01-01

Background As they age, baby boomers (born 1946-1964) will have increasing medical needs and are likely to place large demand on health care resources. Consumer health technologies may help stem rising health care needs and costs by improving provider-to-patient communication, health monitoring, and information access and enabling self-care. Research has not explored the degree to which baby boomers are ready for, or are currently embracing, specific consumer health technologies This study ex...

Technological Readiness of UiTM students in Using Mobile Phones in their English Language Classroom

Directory of Open Access Journals (Sweden)

Agelyia a/p Murugan

2017-04-01

Full Text Available Mobile Assisted Language Learning (MALL by using devices such as mobile phones is an ideal learning platform for learners to acquire language and share knowledge beyond the confines of a fixed location. By utilising the mobile applications available via smartphone, learners can engage in collaborative networks and find information that they need in a variety of diverse environments. This paper shares the findings of a research at UiTM to determine the technological readiness of the students by measuring their digital skills using the Digital Competence Framework (EU. 50 students from the English language proficiency course were purposively sampled because they have been exposed to MALL by their lecturer participated in this research. Their responses were collected through an online questionnaire. The findings showed that all 50 of the students owned a smartphone. 82.6% of the students did not attend any training on how to use the smartphones. 80.4% of the students have their own storing strategies and nearly 90% of the students reported having the following technological skills in operating their smartphone such as accessing applications, ability to record, share and produce technological resources. The findings reiterate that to ensure successful MALL, educators need to be aware of the background and technological skills of the learners before embedding m-learning into the English Language lessons. View it in PDF

Technology Readiness Level Assessment Process as Applied to NASA Earth Science Missions

Science.gov (United States)

Leete, Stephen J.; Romero, Raul A.; Dempsey, James A.; Carey, John P.; Cline, Helmut P.; Lively, Carey F.

2015-01-01

Technology assessments of fourteen science instruments were conducted within NASA using the NASA Technology Readiness Level (TRL) Metric. The instruments were part of three NASA Earth Science Decadal Survey missions in pre-formulation. The Earth Systematic Missions Program (ESMP) Systems Engineering Working Group (SEWG), composed of members of three NASA Centers, provided a newly modified electronic workbook to be completed, with instructions. Each instrument development team performed an internal assessment of its technology status, prepared an overview of its instrument, and completed the workbook with the results of its assessment. A team from the ESMP SEWG met with each instrument team and provided feedback. The instrument teams then reported through the Program Scientist for their respective missions to NASA's Earth Science Division (ESD) on technology readiness, taking the SEWG input into account. The instruments were found to have a range of TRL from 4 to 7. Lessons Learned are presented; however, due to the competition-sensitive nature of the assessments, the results for specific missions are not presented. The assessments were generally successful, and produced useful results for the agency. The SEWG team identified a number of potential improvements to the process. Particular focus was on ensuring traceability to guiding NASA documents, including the NASA Systems Engineering Handbook. The TRL Workbook has been substantially modified, and the revised workbook is described.

Fleet Readiness Center - Southeast Technology Development Program (Cadmium & Hexavalent Chromium Reduction)

Science.gov (United States)

2014-11-01

Fleet Readiness Center - Southeast TECHNOLOGY DEVELOPMENT PROGRAM (Cadmium & Hexavalent Chromium Reduction) Jack Benfer Senior Materials...Development Program (Cadmium & Hexavalent Chromium Reduction) 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT...Rinse Black Oxide Rinse CRES Passivation Chrome Plating Cadmium Plating Cadmium Brush Plating Class N (TRL 9) Class N (TRL 7) Class N (TRL 6

Teaching via Mobile Phone: a Case Study on Malaysian Teachers’ Technology Acceptance and Readiness

OpenAIRE

Issham Ismail; Siti F Bokhare; Siti N Azizan; Nizuwan Azman

2013-01-01

The purpose of this study is to identify the level of technology acceptance among school teachers from the components of awareness and motivation, training and courses, training design, and supports and facilities. This study also aims to investigate whether teachers’ acceptance of technology could influence their readiness for the pedagogical use of mobile phone technology if it is to be implemented in school. A quantitative questionnaire was administered to thirty eight teachers who teach I...

75 FR 65620 - Inglis Hydropower, LLC; Notice of Application Ready for Environmental Analysis and Soliciting...

Science.gov (United States)

2010-10-26

... Hydropower, LLC; Notice of Application Ready for Environmental Analysis and Soliciting Comments...: Inglis Hydropower, LLC. e. Name of Project: Inglis Hydropower Project. f. Location: The project would be... ready for environmental analysis at this time. l. The proposed 2.0-megawatt Inglis Hydropower Project...

Usability and Workflow Evaluation of "RhEumAtic Disease activitY" (READY). A Mobile Application for Rheumatology Patients and Providers.

Science.gov (United States)

Yen, Po-Yin; Lara, Barbara; Lopetegui, Marcelo; Bharat, Aseem; Ardoin, Stacy; Johnson, Bernadette; Mathur, Puneet; Embi, Peter J; Curtis, Jeffrey R

2016-11-02

RhEumAtic Disease activitY (READY) is a mobile health (mHealth) application that aims to create a shared platform integrating data from both patients and physicians, with a particular emphasis on arthritis disease activity. We made READY available on an iPad and pilot implemented it at a rheumatology outpatient clinic. We conducted 1) a usability evaluation study to explore patients' and physicians' interactions with READY, and 2) a time motion study (TMS) to observe the clinical workflow before and after the implementation. A total of 33 patients and 15 physicians participated in the usability evaluation. We found usability problems in navigation, data entry, pain assessment, documentation, and instructions along with error messages. Despite these issues, 25 (75,76%) patients reported they liked READY. Physicians provided mixed feedback because they were concerned about the impact of READY on clinical workflow. Six physicians participated in the TMS. We observed 47 patient visits (44.72 hours) in the pre-implementation phase, and 42 patient visits (37.82 hours) in the post-implementation phase. We found that patients spent more time on READY than paper (4.39mins vs. 2.26mins), but overall, READY did not delay the workflow (pre = 52.08 mins vs. post = 45.46 mins). This time difference may be compensated with READY eliminating a workflow step for the staff. Patients preferred READY to paper documents. Many found it easier to input information because of the larger font size and the ease of 'tapping' rather than writing-out or circling answers. Even though patients spent more time on READY than using paper documents, the longer usage of READY was mainly due to when troubleshooting was needed. Most patients did not have problems after receiving initial support from the staff. This study not only enabled improvements to the software but also serves as good reference for other researchers or institutional decision makers who are interested in implementing such a

State of the art and taxonomy of prognostics approaches, trends of prognostics applications and open issues towards maturity at different technology readiness levels

Science.gov (United States)

Javed, Kamran; Gouriveau, Rafael; Zerhouni, Noureddine

2017-09-01

Integrating prognostics to a real application requires a certain maturity level and for this reason there is a lack of success stories about development of a complete Prognostics and Health Management system. In fact, the maturity of prognostics is closely linked to data and domain specific entities like modeling. Basically, prognostics task aims at predicting the degradation of engineering assets. However, practically it is not possible to precisely predict the impending failure, which requires a thorough understanding to encounter different sources of uncertainty that affect prognostics. Therefore, different aspects crucial to the prognostics framework, i.e., from monitoring data to remaining useful life of equipment need to be addressed. To this aim, the paper contributes to state of the art and taxonomy of prognostics approaches and their application perspectives. In addition, factors for prognostics approach selection are identified, and new case studies from component-system level are discussed. Moreover, open challenges toward maturity of the prognostics under uncertainty are highlighted and scheme for an efficient prognostics approach is presented. Finally, the existing challenges for verification and validation of prognostics at different technology readiness levels are discussed with respect to open challenges.

Capture ready study

Energy Technology Data Exchange (ETDEWEB)

Minchener, A.

2007-07-15

There are a large number of ways in which the capture of carbon as carbon dioxide (CO{sub 2}) can be integrated into fossil fuel power stations, most being applicable for both gas and coal feedstocks. To add to the choice of technology is the question of whether an existing plant should be retrofitted for capture, or whether it is more attractive to build totally new. This miscellany of choices adds considerably to the commercial risk of investing in a large power station. An intermediate stage between the non-capture and full capture state would be advantageous in helping to determine the best way forward and hence reduce those risks. In recent years the term 'carbon capture ready' or 'capture ready' has been coined to describe such an intermediate stage plant and is now widely used. However a detailed and all-encompassing definition of this term has never been published. All fossil fuel consuming plant produce a carbon dioxide gas byproduct. There is a possibility of scrubbing it with an appropriate CO{sub 2} solvent. Hence it could be said that all fossil fuel plant is in a condition for removal of its CO{sub 2} effluent and therefore already in a 'capture ready' state. Evidently, the practical reality of solvent scrubbing could cost more than the rewards offered by such as the ETS (European Trading Scheme). In which case, it can be said that although the possibility exists of capturing CO{sub 2}, it is not a commercially viable option and therefore the plant could not be described as ready for CO{sub 2} capture. The boundary between a capture ready and a non-capture ready condition using this definition cannot be determined in an objective and therefore universally acceptable way and criteria must be found which are less onerous and less potentially contentious to assess. 16 refs., 2 annexes.

Assessment of Technology Readiness Level of a Carbon Dioxide Reduction Assembly (CRA) for use on International Space Station

Science.gov (United States)

Murdoch, Karen; Smith, Fred; Perry, Jay; Green, Steve

2004-01-01

When technologies are traded for incorporation into vehicle systems to support a specific mission scenario, they are often assessed in terms of Technology Readiness Level (TRL). TRL is based on three major categories of Core Technology Components, Ancillary Hardware and System Maturity, and Control and Control Integration. This paper describes the Technology Readiness Level assessment of the Carbon Dioxide Reduction Assembly (CRA) for use on the International Space Station. A team comprising of the NASA Johnson Space Center, Marshall Space Flight Center, Southwest Research Institute and Hamilton Sundstrand Space Systems International have been working on various aspects of the CRA to bring its TRL from 4/5 up to 6. This paper describes the work currently being done in the three major categories. Specific details are given on technology development of the Core Technology Components including the reactor, phase separator and CO2 compressor.

Assessing the relationship between technology readiness and continuance intention in an E-appointment system: relationship quality as a mediator.

Science.gov (United States)

Chen, Shih-Chih; Jong, Din; Lai, Min-Tsai

2014-09-01

Numerous types of self-service technologies have prevailed due to innovations in network and information technology. To hospitals, patient intentions to continue to use the e-appointment system are crucial. Previous investigations discussed only the relationships between the technology readiness of users and their continuance intentions, and ignored the most important mediator, relationship quality. This study explored the relationships among technology readiness, relationship quality, and continuance intention. The research results demonstrated that both optimism and innovativeness significantly and positively influenced continuance intention through the mediating effect of relationship quality. However, discomfort and insecurity hid not significantly influence relationship quality or continuance intention. Finally, theoretical contributions, managerial implications and future research directions were discussed.

Objectively measuring pain using facial expression: is the technology finally ready?

Science.gov (United States)

Dawes, Thomas Richard; Eden-Green, Ben; Rosten, Claire; Giles, Julian; Governo, Ricardo; Marcelline, Francesca; Nduka, Charles

2018-03-01

Currently, clinicians observe pain-related behaviors and use patient self-report measures in order to determine pain severity. This paper reviews the evidence when facial expression is used as a measure of pain. We review the literature reporting the relevance of facial expression as a diagnostic measure, which facial movements are indicative of pain, and whether such movements can be reliably used to measure pain. We conclude that although the technology for objective pain measurement is not yet ready for use in clinical settings, the potential benefits to patients in improved pain management, combined with the advances being made in sensor technology and artificial intelligence, provide opportunities for research and innovation.

Technological readiness of evolutionary water cooled reactors

International Nuclear Information System (INIS)

Juhn, P.E.

1999-01-01

Nuclear energy has evolved to a mature industry that supplies over 16% of the world's electricity, and it represents an important option for meeting the global energy demands of the coming century in an environmentally acceptable manner. New, evolutionary water cooled reactor designs that build on successful performance of predecessors have been developed; these designs have generally been guided by wishes to reduce cost, to improve availability and reliability, and to meet increasingly stringent safety objectives. These three aspects are important factors in what has been called technological readiness for an expanded deployment of nuclear power; a major increase in utilization of nuclear power will only occur if it is economically competitive, and meets safety expectations. To this end, the industry will also have to maintain or improve the public perception of nuclear power as a benign, economical and reliable energy source. (author)

75 FR 38800 - Jordan Hydroelectric Limited Partnership; Notice of Application Ready for Environmental Analysis...

Science.gov (United States)

2010-07-06

... Hydroelectric Limited Partnership; Notice of Application Ready for Environmental Analysis and Soliciting... following hydroelectric application has been filed with the Commission and is available for public... 13, 2009. d. Applicant: Jordan Hydroelectric Limited Partnership. e. Name of Project: Flannagan...

75 FR 63450 - Wilkesboro Hydroelectric Company; Notice of Application Ready for Environmental Analysis and...

Science.gov (United States)

2010-10-15

... Hydroelectric Company; Notice of Application Ready for Environmental Analysis and Soliciting Comments... hydroelectric application has been filed with the Commission and is available for public inspection. a. Type of.... Applicant: Wilkesboro Hydroelectric Company. e. Name of Project: W. Kerr Scott Hydropower Project. f...

Demand Response Technology Readiness Levels for Energy Management in Blocks of Buildings

Directory of Open Access Journals (Sweden)

Tracey Crosbie

2018-01-01

Full Text Available Fossil fuels deliver most of the flexibility in contemporary electricity systems. The pressing need to reduce CO2 emissions requires new methods to provide this flexibility. Demand response (DR offers consumers a significant role in the delivery of flexibility by reducing or shifting their electricity usage during periods of stress or constraint. Blocks of buildings offer more flexibility in the timing and use of energy than single buildings, however, and a lack of relevant scalable ICT tools hampers DR in blocks of buildings. To ameliorate this problem, a current innovation project called “Demand Response in Blocks of Buildings” (DR-BoB: www.dr-bob.eu has integrated existing technologies into a scalable cloud-based solution for DR in blocks of buildings. The degree to which the DR-BoB energy management solution can increase the ability of any given site to participate in DR is dependent upon its current energy systems, i.e., the energy metering, the telemetry and control technologies in building management systems, and the existence/capacity of local power generation and storage plants. To encourage the owners and managers of blocks of buildings to participate in DR, a method of assessing and validating the technological readiness to participate in DR energy management solutions at any given site is required. This paper describes the DR-BoB energy management solution and outlines what we have called the demand response technology readiness levels (DRTRLs for the implementation of such a solution in blocks of buildings.

Technology readiness levels and technology status for selected long term/high payoff technologies on the RLV program

Science.gov (United States)

Rosmait, Russell L.

1996-01-01

The development of a new space transportation system in a climate of constant budget cuts and staff reductions can be and is a difficult task. It is no secret that NASA's current launching system consumes a very large portion of NASA funding and requires a large army of people to operate & maintain the system. The new Reusable Launch Vehicle (RLV) project and it's programs are faced with a monumental task of making the cost of access to space dramatically lower and more efficient than NASA's current system. With pressures from congressional budget cutters and also increased competition and loss of market share from international agencies RLV's first priority is to develop a 'low-cost, reliable transportation to earth orbit.' One of the RLV's major focus in achieving low-cost, reliable transportation to earth orbit is to rely on the maturing of advanced technologies. The technologies for the RLV are numerous and varied. Trying to assess their current status, within the RLV development program is paramount. There are several ways to assess these technologies. One way is through the use of Technology Readiness Levels (TRL's). This project focused on establishing current (summer 95) 'worst case' TRL's for six selected technologies that are under consideration for use within the RLV program. The six technologies evaluated were Concurrent Engineering, Embedded Sensor Technology, Rapid Prototyping, Friction Stir Welding, Thermal Spray Coatings, and VPPA Welding.

The application of CAD / CAM technology in Dentistry

Science.gov (United States)

Susic, I.; Travar, M.; Susic, M.

2017-05-01

Information and communication technologies have found their application in the healthcare sector, including the frameworks of modern dentistry. CAD / CAM application in dentistry is the process by which is attained finished dental restoration through fine milling process of ready ceramic blocks. CAD / CAM is an acronym of english words Computer-Aided-Design (CAD) / Computer-Aided-Manufacture (CAM), respectively dental computer aided design and computer aided manufacture of inlays, onlays, crowns and bridges. CAD / CAM technology essentially allows you to create a two-dimensional and three-dimensional models and their materialization by numerical controlled machines. In order to operate more efficiently, reduce costs, increase user/patient satisfaction and ultimately achieve profits, many dental offices in the world have their attention focused on implementation of modern IT solutions in everyday practice. In addition to the specialized clinic management software, inventory control, etc., or hardware such as the use of lasers in cosmetic dentistry or intraoral scanning, recently the importance is given to the application of CAD / CAM technology in the field of prosthetic. After the removal of pathologically altered tooth structure, it is necessary to achieve restoration that will be most similar to the anatomy of a natural tooth. Applying CAD / CAM technology on applicable ceramic blocks it can be obtained very quick, but also very accurate restoration, in the forms of inlays, onlays, bridges and crowns. The paper presents the advantages of using this technology as well as satisfaction of the patients and dentists by using systems as: Cercon, Celay, Cerec, Lava, Everest, which represent imperative of modern dentistry in creating fixed dental restorations.

Definition, technology readiness, and development cost of the orbit transfer vehicle engine integrated control and health monitoring system elements

Science.gov (United States)

Cannon, I.; Balcer, S.; Cochran, M.; Klop, J.; Peterson, S.

1991-01-01

An Integrated Control and Health Monitoring (ICHM) system was conceived for use on a 20 Klb thrust baseline Orbit Transfer Vehicle (OTV) engine. Considered for space used, the ICHM was defined for reusability requirements for an OTV engine service free life of 20 missions, with 100 starts and a total engine operational time of 4 hours. Functions were derived by flowing down requirements from NASA guidelines, previous OTV engine or ICHM documents, and related contracts. The elements of an ICHM were identified and listed, and these elements were described in sufficient detail to allow estimation of their technology readiness levels. These elements were assessed in terms of technology readiness level, and supporting rationale for these assessments presented. The remaining cost for development of a minimal ICHM system to technology readiness level 6 was estimated. The estimates are within an accuracy range of minus/plus 20 percent. The cost estimates cover what is needed to prepare an ICHM system for use on a focussed testbed for an expander cycle engine, excluding support to the actual test firings.

Early Childhood Teachers' Beliefs about Readiness for Teaching Science, Technology, Engineering, and Mathematics

Science.gov (United States)

Park, Mi-Hwa; Dimitrov, Dimiter M.; Patterson, Lynn G.; Park, Do-Yong

2017-01-01

The purpose of this study was to examine beliefs of early childhood teachers about their readiness for teaching science, technology, engineering, and mathematics, with a focus on testing for heterogeneity of such beliefs and differential effects of teacher-related factors. The results from latent class analysis of survey data revealed two latent…

Technology readiness of partitioning and transmutation toward closed fuel cycle in Japan

International Nuclear Information System (INIS)

Ikeda, Kazumi; Kurata, Masaki; Morita, Yasuji; Tsujimoto, Kazufumi; Minato, Kazuo; Koyama, Shin-ichi

2011-01-01

This paper treats technology readiness level (TRL) assessment of Partitioning and Transmutation (P-T) toward closed fuel cycle in JAPAN. The purpose is providing clarified information related to the current maturity of the partitioning and transmutation technologies by applying the methodology of TRL, parallel to attempting to establish common indications among relating technology area. The methodology should be one of useful communication tools between specialists and management level, and also among countries interested in the P-T technologies. The generic TRL in this study is based on the GNEP (Global Nuclear Energy Partnership)'s definition: TRL 3 shows the status that critical function is proved and elemental technologies are identified, TRL 4 represents that relating technologies are validated at bench scale in laboratory environment, and TRL 5 achieves the completion of development related to the subsystem and elemental technologies. Detailed indications are established through discussion of the relating specialists. Reviewed technological area includes P-T and minor actinide (MA) cycle: Fast Breeder Reactor (FBR) and Accelerator driven system (ADS) for MA transmutation, partitioning processes, and MA-bearing fuels. The assessments reveal that TRL spreads around TRL 3 to TRL 4 because each system requires more the development of elemental technologies. Transmutation core of FBR is assessed to be TRL 4 in that MA bearing integral test is required additionally, and ADS becomes TRL 3 because the elemental technologies were identified and the requirements were specified. Consequently, the common key issue is how the nuclear calculation methodology will be validated for MA-bearing-fuelled core, since several percentages of MA changes the void reactivity and the Doppler Effect significantly, which are inherently important in reactor safety. It should be that critical experiments with several kg of americium or more are difficult in the existing experimental

Analysis of e-learning implementation readiness based on integrated elr model

Science.gov (United States)

Adiyarta, K.; Napitupulu, D.; Rahim, R.; Abdullah, D.; Setiawan, MI

2018-04-01

E-learning nowadays has become a requirement for institutions to support their learning activities. To adopt e-learning, an institution requires a large strategy and resources for optimal application. Unfortunately, not all institutions that have used e-learning got the desired results or expectations. This study aims to identify the extent of the level of readiness of e-learning implementation in institution X. The degree of institutional readiness will determine the success of future e-learning utilization. In addition, institutional readiness measurement are needed to evaluate the effectiveness of strategies in e-learning development. The research method used is survey with questionnaire designed based on integration of 8 best practice ELR (e-learning readiness) model. The results showed that from 13 factors of integrated ELR model being measured, there are 3 readiness factors included in the category of not ready and needs a lot of work. They are human resource (2.57), technology skill (2.38) and content factors (2.41). In general, e-learning implementation in institutions is in the category of not ready but needs some of work (3.27). Therefore, the institution should consider which factors or areas of ELR factors are considered still not ready and needs improvement in the future.

Critical analysis of e-health readiness assessment frameworks: suitability for application in developing countries.

Science.gov (United States)

Mauco, Kabelo Leonard; Scott, Richard E; Mars, Maurice

2018-02-01

Introduction e-Health is an innovative way to make health services more effective and efficient and application is increasing worldwide. e-Health represents a substantial ICT investment and its failure usually results in substantial losses in time, money (including opportunity costs) and effort. Therefore it is important to assess e-health readiness prior to implementation. Several frameworks have been published on e-health readiness assessment, under various circumstances and geographical regions of the world. However, their utility for the developing world is unknown. Methods A literature review and analysis of published e-health readiness assessment frameworks or models was performed to determine if any are appropriate for broad assessment of e-health readiness in the developing world. A total of 13 papers described e-health readiness in different settings. Results and Discussion Eight types of e-health readiness were identified and no paper directly addressed all of these. The frameworks were based upon varying assumptions and perspectives. There was no underlying unifying theory underpinning the frameworks. Few assessed government and societal readiness, and none cultural readiness; all are important in the developing world. While the shortcomings of existing frameworks have been highlighted, most contain aspects that are relevant and can be drawn on when developing a framework and assessment tools for the developing world. What emerged is the need to develop different assessment tools for the various stakeholder sectors. This is an area that needs further research before attempting to develop a more generic framework for the developing world.

Readiness of Adults to Learn Using E-Learning, M-Learning and T-Learning Technologies

Science.gov (United States)

Vilkonis, Rytis; Bakanoviene, Tatjana; Turskiene, Sigita

2013-01-01

The article presents results of the empirical research revealing readiness of adults to participate in the lifelong learning process using e-learning, m-learning and t-learning technologies. The research has been carried out in the framework of the international project eBig3 aiming at development a new distance learning platform blending virtual…

75 FR 4058 - CRD Hydroelectric, LLC; Notice of Application Ready for Environmental Analysis and Soliciting...

Science.gov (United States)

2010-01-26

... Hydroelectric, LLC; Notice of Application Ready for Environmental Analysis and Soliciting Comments... hydroelectric application has been filed with the Commission and is available for public inspection. a. Type of.... Applicant: CRD Hydroelectric, LLC. e. Name of Project: Red Rock Hydroelectric Project. f. Location: On the...

75 FR 352 - Enloe Hydroelectric Project; Notice of Application Ready for Environmental Analysis and...

Science.gov (United States)

2010-01-05

... Hydroelectric Project; Notice of Application Ready for Environmental Analysis and Soliciting Comments... hydroelectric application has been filed with the Commission and is available for public inspection. a. Type of... Utility District No. 1 of Okanogan County. e. Name of Project: Enloe Hydroelectric Project. f. Location...

Technology Readiness Evaluation For Aluminum Removal And Sodium Hydroxide Regenration From Hanford Tank Waste By Lithium Hydrotalcite Precipitation

International Nuclear Information System (INIS)

Sams, T.L.; Massie, H.L.

2011-01-01

A Technology Readiness Evaluation (TRE) performed by AREV A Federal Services, LLC (AFS) for Washington River Protection Solutions, LLC (WRPS) shows the lithium hydrotalcite (LiHT) process invented and patented (pending) by AFS has reached an overall Technology Readiness Level (TRL) of 3. The LiHT process removes aluminum and regenerates sodium hydroxide. The evaluation used test results obtained with a 2-L laboratory-scale system to validate the process and its critical technology elements (CTEs) on Hanford tank waste simulants. The testing included detailed definition and evaluation for parameters of interest and validation by comparison to analytical predictions and data quality objectives for critical subsystems. The results of the TRE would support the development of strategies to further mature the design and implementation of the LiHT process as a supplemental pretreatment option for Hanford tank waste.

e-Learning readiness amongst nursing students at the Durban ...

African Journals Online (AJOL)

e-Learning readiness amongst nursing students at the Durban University of ... make the shift from traditional learning to the technological culture of e-Learning at a ... equipment and technological readiness for the change in learning method.

Do iPad Applications Help Students with Developmental Disabilities Improve Life-Readiness Skills?

Science.gov (United States)

Dunn, Michael; Barrio, Brenda; Hsiao, Yun-Ju

2016-01-01

Students with developmental disabilities often struggle with life-readiness skills (e.g., literacy skills such as reading and writing, task completion, and communication), which also help prepare students for the workplace. Assistive technology tools offer these students a means to do better in these areas. In this action-research study, we…

Relative levels of eLearning readiness, applications and trainee requirements in Botswana’s Private Sector

Directory of Open Access Journals (Sweden)

Paul T. Nleya

2009-09-01

Full Text Available Abstract The rapid growth and modernization of economies in developing countries like Botswana creates new and unmet demands for certain kinds of educated and skilled labour. The expansion of secondary and tertiary school systems has also created a problem of unemployed school leavers. The growth of Information and Communication Technologies (ICTs, globalization and the digital divide likewise, have together put new pressures on developing countries to accelerate their development to meet these demands. This paper reports the results of a survey that sought to assess levels of eLearning readiness, applications and trainee requirements in Botswana’s private sector. Such baseline data can inform policymakers and researchers and promote the transformation required of private sector companies to become learning organizations. The findings suggested that eLearning readiness (eReadiness levels were moderate to low, and that archaic technology (i. e., overhead projection was used by more than half of the private sector organizations for training (with far less than half using digital eLearning applications. While the overall findings suggested low levels of eLearning readiness, applications and trainee requirements in Botswana’s private sector, seventy percent of trainers reported that their organizations encouraged them to acquire basic computer skills to facilitate eLearning. The current eLearning situation in Botswana, and the literature reviewed, demonstrates that the integration of ICTs in both developing and developed countries was a gradual process. Public-Private Partnerships (PPPs have expedited the change process in developed countries. However, several limitations are associated with such partnerships and this renders lessons for developing countries to emulate. Résumé La croissance et la modernisation rapides des économies des pays en voie de développement comme le Botswana créent des demandes nouvelles et non satisfaites pour

Transrapid (the first high-speed Maglev train system certified ready for application): Development status and prospects for deployment

Science.gov (United States)

Luerken, Reinhard F.

1994-01-01

The Transrapid maglev technology is at the threshold of commercial deployment and technologically all prerequisites for the successful operation of the system in public service are given. In post unification Germany the domestic maglev technology is envisioned to be applied in the Berlin-Hamburg project. At present, a public-private funding concept is being prepared and the lengthy planning process is about to be initiated. In the USA the AMG has presented a program to Americanize the technology and to make it available for commercial use in the U.S. in the very near future. The paramount features of this program are to generate economic development, provide a basis for transportation technology development, create opportunities for U.S. industry, improve the U.S. transportation infrastructure, and improve the environment and traveler safety. Maglev is ready for the U.S.; is the U.S. ready for maglev?

[Theoretical and methodological bases for formation of future drivers 'readiness to application of physical-rehabilitation technologies].

Science.gov (United States)

Yemets, Anatoliy V; Donchenko, Viktoriya I; Scrinick, Eugenia O

2018-01-01

Introduction: Experimental work is aimed at introducing theoretical and methodological foundations for the professional training of the future doctor. The aim: Identify the dynamics of quantitative and qualitative indicators of the readiness of a specialist in medicine. Materials and methods: The article presents the course and results of the experimental work of the conditions of forming the readiness of future specialists in medicine. Results: Our methodical bases for studying the disciplines of the general practice and specialized professional stage of experimental training of future physicians have been worked out. Conclusions: It is developed taking into account the peculiarities of future physician training of materials for various stages of experimental implementation in the educational process of higher medical educational institutions.

Technology Applications that Support Space Exploration

Science.gov (United States)

Henderson, Edward M.; Holderman, Mark L.

2011-01-01

consideration and are addressed in this paper. These applications have been made available to the various NASA study groups that are determining the next steps the Agency must take to secure a sound foundation for future space exploration The paper also addresses how follow-on demonstrations, as launch performance grows, can build on the earlier applications to provide increased benefits for both the commercial and scientific communities. The architecture of incrementally building upon previous successes and insights dramatically lowers the overall associated risk for developing and maturing the key enabling technologies. The goal is to establish a potential business case that encourages commercial activity, thereby reducing the cost for the demonstration while using the technology maturation in developing readiness for future space exploration with overall less risk.

40 CFR 406.90 - Applicability; description of the ready-to-eat cereal subcategory.

Science.gov (United States)

2010-07-01

... produce various breakfast cereals normally available for human consumption without cooking. ...-to-eat cereal subcategory. 406.90 Section 406.90 Protection of Environment ENVIRONMENTAL PROTECTION... Cereal Subcategory § 406.90 Applicability; description of the ready-to-eat cereal subcategory. The...

e-Learning readiness amongst nursing students at the Durban ...

African Journals Online (AJOL)

Marilynne Coopasami

c Centre for Excellence in Learning and Teaching, ML Sultan Campus, Durban University of Technology, Durban ... education, technological and equipment readiness require attention before it can be ... strategy; consider the benefits and disadvantages of e- ... using an appropriate tool to measure e-Learning readiness has.

Technology Readiness and E-Commerce Adoption among Entrepreneurs of SMEs in Bandung City, Indonesia

Directory of Open Access Journals (Sweden)

Novika Candra Astuti

2014-02-01

Full Text Available The emergence of internet-based electronic commerce offers considerable opportunities for companies to expand their customer base, enter new product markets, and rationalize their business. The Indonesian government has initiated and implemented a series of plans and activities to promote technology use to increase SMEs’ performance. Despite such efforts, technology adoption rate are still low. Therefore, it is important to understand the factors affecting an entrepreneurs’ decision on internet adoption, by measuring technology readiness (TR. The purpose of this study is to investigate TR and the extent to which E-commerce is adopted amongst entrepreneurs. This study is replication of Parasuraman’s study on the Technology Readiness Index (TRI. Questionnaires were distributed using a convenience sampling method to 190 entrepreneurs of SME in Bandung city. The findings indicate that entrepreneurs are moderate in terms of their TR. There are significant differences in terms of TR across entrepreneurs’ backgrounds (gender, age, education, and income. In relation to internet adoption by those surveyed, as their use of media promotion is still low, there were only 36.3 percent who adopted it. The results clearly indicate the need to provide support to SMEs to adopt and use e-commerce. These results have implications not only for managers of SMEs but also for government agencies in developing countries such as Indonesia. The findings have implications for researchers and practitioners by identifying TR drivers (optimism and innovativeness, and barriers (discomfort and insecurity, that contribute to effectively leveraging the Internet in an important area for SMEs.

Advanced Acid Gas Separation Technology for Clean Power and Syngas Applications

Energy Technology Data Exchange (ETDEWEB)

Amy, Fabrice [Air Products and Chemicals Inc., Allentown, PA (United States); Hufton, Jeffrey [Air Products and Chemicals Inc., Allentown, PA (United States); Bhadra, Shubhra [Air Products and Chemicals Inc., Allentown, PA (United States); Weist, Edward [Air Products and Chemicals Inc., Allentown, PA (United States); Lau, Garret [Air Products and Chemicals Inc., Allentown, PA (United States); Jonas, Gordon [Air Products and Chemicals Inc., Allentown, PA (United States)

2015-06-30

Air Products has developed an acid gas removal technology based on adsorption (Sour PSA) that favorably compares with incumbent AGR technologies. During this DOE-sponsored study, Air Products has been able to increase the Sour PSA technology readiness level by successfully operating a two-bed test system on coal-derived sour syngas at the NCCC, validating the lifetime and performance of the adsorbent material. Both proprietary simulation and data obtained during the testing at NCCC were used to further refine the estimate of the performance of the Sour PSA technology when expanded to a commercial scale. In-house experiments on sweet syngas combined with simulation work allowed Air Products to develop new PSA cycles that allowed for further reduction in capital expenditure. Finally our techno economic analysis of the use the Sour PSA technology for both IGCC and coal-to-methanol applications suggests significant improvement of the unit cost of electricity and methanol compared to incumbent AGR technologies.

An assessment of advanced displays and controls technology applicable to future space transportation systems

Science.gov (United States)

Hatfield, Jack J.; Villarreal, Diana

1990-01-01

The topic of advanced display and control technology is addressed along with the major objectives of this technology, the current state of the art, major accomplishments, research programs and facilities, future trends, technology issues, space transportation systems applications and projected technology readiness for those applications. The holes that may exist between the technology needs of the transportation systems versus the research that is currently under way are addressed, and cultural changes that might facilitate the incorporation of these advanced technologies into future space transportation systems are recommended. Some of the objectives are to reduce life cycle costs, improve reliability and fault tolerance, use of standards for the incorporation of advancing technology, and reduction of weight, volume and power. Pilot workload can be reduced and the pilot's situational awareness can be improved, which would result in improved flight safety and operating efficiency. This could be accomplished through the use of integrated, electronic pictorial displays, consolidated controls, artificial intelligence, and human centered automation tools. The Orbiter Glass Cockpit Display is an example examined.

Economic Feasibility and Market Readiness of Solar Technologies. Draft Final Report. Volume I.

Energy Technology Data Exchange (ETDEWEB)

Flaim, Silvio J.; Buchanan, Deborah L.; Christmas, Susan; Fellhauer, Cheryl; Glenn, Barbara; Ketels, Peter A.; Levary, Arnon; Mourning, Pete; Steggerda, Paul; Trivedi, Harit; Witholder, Robert E.

1978-09-01

Systems descriptions, costs, technical and market readiness assessments are reported for ten solar technologies: solar heating and cooling of buildings (SHACOB), passive, agricultural and industrial process heat (A/IPH), biomass, ocean thermal (OTEC), wind (WECS), solar thermal electric, photovoltaics, satellite power station (SPS), and solar total energy systems (STES). Study objectives, scope, and methods. are presented. of Joint Task The cost and market analyses portion 5213/6103 will be used to make commercialization assessments in the conclusions of. the final report.

Analysis of user readiness toward ICT usage at small medium enterprise in south tangerang

Science.gov (United States)

Napitupulu, D.; Syafrullah, M.; Rahim, R.; Abdullah, D.; Setiawan, MI

2018-04-01

Utilization of Information and Communication Technology (ICT) is still relatively low in the level of SMEs due to various limitations ranging from access to capital, till the marketing network. ICT is present to provide the ability for SMEs in improving the benefits and competitive advantage of the organization. This study aims to determine the level of readiness of SMEs in utilizing technology, especially ICT. The methodology used is a survey to see the technology readiness of 107 SMEs in South Tangerang selected by purposive sampling. The approach used is TRI (Technology Readiness Index) which is the individual perception of technology based on four criteria that is optimism, innovativeness, discomfort and insecurity. The results showed that the optimism and innovativeness variables significantly positively influence the technology readiness while the variables of discomfort and insecurity also significantly positively influence the readiness of ICT.

Is the RFID technology ready to integrate supplychain activities?

OpenAIRE

Chan, Hing Kai; Chan, Felix T.S.

2008-01-01

Radio Frequency Identification (RFID) is not a new technology andhas been introduced for military applications for a long time. Nevertheless, ithas been recognised as a device that may soon change the mode of operationsthroughout the supply chain. There is no question that the technology willreduce labour and improve accuracy in inventory management by improvinginventory visibility. However, a review of recent research and the developmentof RFID technology in supply chain related applications...

75 FR 16763 - Ready-to-Learn Television Program

Science.gov (United States)

2010-04-02

... DEPARTMENT OF EDUCATION [CFDA Number 84.295A] Ready-to-Learn Television Program AGENCY: Office of Innovation and Improvement, Department of Education. ACTION: Notice inviting applications for new awards for... FR 13515) a notice inviting applications for new awards for FY 2010 for the Ready-to-Learn Television...

75 FR 18170 - Ready-to-Learn Television Program

Science.gov (United States)

2010-04-09

... DEPARTMENT OF EDUCATION [CFDA Number 84.295A] Ready-to-Learn Television Program AGENCY: Office of Innovation and Improvement, Department of Education. ACTION: Notice inviting applications for new awards for... FR 13515) a notice inviting applications for new awards for FY 2010 for the Ready-to-Learn Television...

Students' Readiness for E-Learning Application in Higher Education

Science.gov (United States)

Rasouli, Atousa; Rahbania, Zahra; Attaran, Mohammad

2016-01-01

The main goal of this research was to investigate the readiness of art students in applying e-learning. This study adopted a survey research design. From three public Iranian Universities (Alzahra, Tarbiat Modares, and Tehran), 347 students were selected by multistage cluster sampling and via Morgan Table. Their readiness for E-learning…

Is clinical virtual reality ready for primetime?

Science.gov (United States)

Rizzo, Albert Skip; Koenig, Sebastian Thomas

2017-11-01

Since the mid-1990s, a significant scientific literature has evolved regarding the outcomes from the use of what we now refer to as clinical virtual reality (VR). This use of VR simulation technology has produced encouraging results when applied to address cognitive, psychological, motor, and functional impairments across a wide range of clinical health conditions. This article addresses the question, "Is clinical VR ready for primetime?" After a brief description of the various forms of VR technology, we discuss the trajectory of clinical VR over the last 20 years and summarize the basic assets that VR offers for creating clinical applications. The discussion then addresses the question of readiness in terms of the theoretical basis for clinical VR assets, the research to date, the pragmatic factors regarding availability, usability, and costs of clinical VR content/systems, and the ethical issues for the safe use of VR with clinical populations. Our review of the theoretical underpinnings and research findings to date leads to the prediction that clinical VR will have a significant impact on future research and practice. Pragmatic issues that can influence adoption across many areas of psychology also appear favorable, but professional guidelines will be needed to promote its safe and ethical use. Although there is still much research needed to advance the science in this area, we strongly believe that clinical VR applications will become indispensable tools in the toolbox of psychological researchers and practitioners and will only grow in relevance and popularity in the future. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Why Do Teachers Use Game-Based Learning Technologies? The Role of Individual and Institutional ICT Readiness

OpenAIRE

Hamari, Juho; Nousiainen, Tuula

2015-01-01

This paper investigates how different individual and institutional factors pertaining to ICT readiness influence teachers’ adoption of game-based learning technologies. The data were gathered from Finnish primary, lower secondary and upper secondary school teachers (N=1668) with an online survey. The results indicate that openness towards ICT, ICT attitude and the ICT compatibility with teaching positively influence the perceived value whereas openness towards ICT, ...

The Readiness of Sorsogon State College Faculty for Teaching with ICT: Basis for a Faculty Training Program

Directory of Open Access Journals (Sweden)

Catherine A. De Castro

2016-02-01

Full Text Available Information and communication technologies (ICT such as computers, multimedia systems, productivity software, and the Internet have greatly improved the performance of different organizations and influenced higher learning institutions like Sorsogon State College (SSC to develop and implement innovative teaching and learning methods. However, despite the many benefits of ICT when used in education, there are still faculty members who do not use these technologies for teaching. Hence, this research was conducted to assess their readiness for teaching with ICT. Findings revealed that most of the surveyed respondents were above forty-five years old, have 1-10 years of government service, and have specialization in the field of education. In terms of readiness to teach with ICT, the results disclosed that they were fairly ready along human-resource readiness, ready along technological skill readiness, and much ready along equipment readiness. Their age was not significantly related to their human resource readiness but significantly related to their technological skill and equipment readiness. The respondents’ number of years in the government was significantly related to their readiness to teach with ICT in terms of human resource, technological skill, and equipment readiness. Their field of specialization was not significantly related to their readiness to teach with ICT. Among the most identified factors why some of them do not use ICT resources were unavailability of ICT resources, lack of knowledge and lack of familiarity to ICT. The output of this research is a faculty training program to enhance their know

PROMETHEE-ROC Model for Assessing the Readiness of Technology for Generating Energy

Directory of Open Access Journals (Sweden)

Danielle Costa Morais

2015-01-01

Full Text Available This paper puts forward a proposal for a multicriteria decision model for prioritizing technologies that are critical for power generation in the energy sector. It deals with the context of imprecise information regarding importance of criteria; then an integration of surrogate weights with the PROMETHEE method is undertaken in order to approach this context. In this type of strategic decision problem, how to deal with imprecise information is always a challenge. The use of surrogate weights presents a significant contribution and it can facilitate the assignment of weights in a decision ranking problem, which requires the decision-maker (DM to order the criteria by their importance for the decision problem. Thus for this situation of assessing the readiness of technology for generating energy where the DM is able and feels comfortable to order all criteria by their relative importance, the proposed approach of surrogate weights in the PROMETHEE II method, the PROMETHEE-ROC model, is shown to be an adequate approach.

PSYCHOLOGICAL STRATEGY OF COOPERATION, MOTIVATIONAL, INFORMATION AND TECHNOLOGICAL COMPONENTS OF FUTURE HUMANITARIAN TEACHER READINESS FOR PROFESSIONAL ACTIVITY IN POLYSUBJECTIVE LEARNING ENVIRONMENT

Directory of Open Access Journals (Sweden)

Y. Spivakovska

2014-04-01

Full Text Available Redefining of modern information and communication technologies (ICT from teaching aids to teaching process subjects, continuous growth of their subjectivity necessary demands appropriate knowledge, skills, appropriate attitude to didactic capabilities of ICT, ability to cooperate with them and to build pupils learning activity aimed at formation and development of self organization, self development skills, promoting their subjective position in getting education that will be readiness of modern teacher to organize effective professional activities in polysubjective learning environment (PLE. The new tasks of humanitarian teacher related to self selection and design of educational content as well as the modeling of the learning process in conditions of PLE virtualized alternatives choice, impose special requirements to professionally important teacher’s personality qualities, rather to his readiness to implement effective professional work in such conditions. In this article the essence of future humanitarian teacher readiness concept to professional activity in polysubjective educational environment is proved. The structure of the readiness is analyzed. Psychological strategy of cooperation, reflective, motivational and informational partials are substantiated and characterized as components of the future humanitarian teacher readiness to professional activities in polysubjective educational environment.

E-health readiness assessment framework in iran.

Science.gov (United States)

Rezai-Rad, M; Vaezi, R; Nattagh, F

2012-01-01

Concept of e-readiness is used in many areas such as e-business, e-commerce, e-government, and e-banking. In terms of healthcare, e-readiness is a rather new concept, and is propounded under the title of E-healthcare. E-health readiness refers to the readiness of communities and healthcare institutions for the expected changes brought by programs related to Information and Communications Technology (lCT). The present research is conducted aiming at designing E-health Readiness Assessment Framework (EHRAF) in Iran. The e-health readiness assessment framework was designed based on reviewing literature on e-readiness assessment models and opinions of ICT and health experts. In the next step, Delphi method was used to develop and test the designed framework. Three questionnaires developed to test and modify the model while determining weights of the indices; afterward they were either sent to experts through email or delivered to them in face. The designed framework approved with 4 dimensions, 11 constituents and 58 indices. Technical readiness had the highest importance coefficient (0.256099), and the other dimensions were of the next levels of coefficient importance: core readiness (0.25520), social communication readiness (0.244658), and engagement readiness (0.244039). The framework presents the movement route and investment priorities in e-health in Iran. The proposed framework is a good instrument for measuring the e-readiness in health centers in Iran, and for identifying strengths and weaknesses of these centers to access ICT and its implementation for more effectiveness and for analyzing digital divide between them, as well.

E-Health Readiness Assessment Framework in Iran

Science.gov (United States)

Rezai-Rad, M; Vaezi, R; Nattagh, F

2012-01-01

Background: Concept of e-readiness is used in many areas such as e-business, e-commerce, e-government, and e-banking. In terms of healthcare, e-readiness is a rather new concept, and is propounded under the title of E-healthcare. E-health readiness refers to the readiness of communities and healthcare institutions for the expected changes brought by programs related to Information and Communications Technology (lCT). The present research is conducted aiming at designing E-health Readiness Assessment Framework (EHRAF) in Iran. Methods: The e-health readiness assessment framework was designed based on reviewing literature on e-readiness assessment models and opinions of ICT and health experts. In the next step, Delphi method was used to develop and test the designed framework. Three questionnaires developed to test and modify the model while determining weights of the indices; afterward they were either sent to experts through email or delivered to them in face. Results: The designed framework approved with 4 dimensions, 11 constituents and 58 indices. Technical readiness had the highest importance coefficient (0.256099), and the other dimensions were of the next levels of coefficient importance: core readiness (0.25520), social communication readiness (0.244658), and engagement readiness (0.244039). Conclusion: The framework presents the movement route and investment priorities in e-health in Iran. The proposed framework is a good instrument for measuring the e-readiness in health centers in Iran, and for identifying strengths and weaknesses of these centers to access ICT and its implementation for more effectiveness and for analyzing digital divide between them, as well. PMID:23304661

75 FR 62516 - Northern Illinois Hydropower, LLC; Notice of Application Ready for Environmental Analysis and...

Science.gov (United States)

2010-10-12

... Illinois Hydropower, LLC; Notice of Application Ready for Environmental Analysis and Soliciting Comments...: Northern Illinois Hydropower, LLC. e. Name of Project: Dresden Island Project. f. Location: U.S. Army Corps... Zdunich, Northern Illinois Hydropower, LLC, 801 Oakland Avenue, Joliet, IL 60435, (312) 320-1610. i. FERC...

75 FR 62518 - Northern Illinois Hydropower, LLC; Notice of Application Ready for Environmental Analysis and...

Science.gov (United States)

2010-10-12

... Illinois Hydropower, LLC; Notice of Application Ready for Environmental Analysis and Soliciting Comments...: Northern Illinois Hydropower, LLC. e. Name of Project: Brandon Road Hydroelectric Project. f. Location: U.S... Hydropower, LLC, 801 Oakland Avenue, Joliet, IL 60435, (312) 320-1610. i. FERC Contact: Janet Hutzel, (202...

Possibility to Use Mobile Learning to Promote World Heritage Site Preservation Awareness in Luang Prabang, Lao Pdr: a Readiness Study

Science.gov (United States)

Poong, Y. S.; Yamaguchi, S.; Takada, J.

2013-07-01

This paper elucidates the current state of mobile technology readiness among young adults in higher education institution based on surveys and interviews. Although Lao PDR is ranked as low category in the ICT Index by International Telecommunication Union (ITU), findings show that there exists high level of readiness among the young adults. Recommendations for future research are developed to guide the development of mobile learning application with the aim to promote World Heritage Site preservation awareness.

Usability and Workflow Evaluation of “RhEumAtic Disease Activity” (READY)

Science.gov (United States)

Yen, Po-Yin; Lara, Barbara; Lopetegui, Marcelo; Bharat, Aseem; Ardoin, Stacy; Johnson, Bernadette; Mathur, Puneet; Embi, Peter J.

2016-01-01

Summary Background RhEumAtic Disease activitY (READY) is a mobile health (mHealth) application that aims to create a shared platform integrating data from both patients and physicians, with a particular emphasis on arthritis disease activity. Methods We made READY available on an iPad and pilot implemented it at a rheumatology out-patient clinic. We conducted 1) a usability evaluation study to explore patients’ and physicians’ interactions with READY, and 2) a time motion study (TMS) to observe the clinical workflow before and after the implementation. Results A total of 33 patients and 15 physicians participated in the usability evaluation. We found usability problems in navigation, data entry, pain assessment, documentation, and instructions along with error messages. Despite these issues, 25 (75,76%) patients reported they liked READY. Physicians provided mixed feedback because they were concerned about the impact of READY on clinical workflow. Six physicians participated in the TMS. We observed 47 patient visits (44.72 hours) in the pre-implementation phase, and 42 patient visits (37.82 hours) in the post-implementation phase. We found that patients spent more time on READY than paper (4.39mins vs. 2.26mins), but overall, READY did not delay the workflow (pre = 52.08 mins vs. post = 45.46 mins). This time difference may be compensated with READY eliminating a workflow step for the staff. Conclusion Patients preferred READY to paper documents. Many found it easier to input information because of the larger font size and the ease of ‘tapping’ rather than writing-out or circling answers. Even though patients spent more time on READY than using paper documents, the longer usage of READY was mainly due to when troubleshooting was needed. Most patients did not have problems after receiving initial support from the staff. This study not only enabled improvements to the software but also serves as good reference for other researchers or institutional decision

Dry tree semisubmersible platform: from 'technology accepted' to 'project ready'

Energy Technology Data Exchange (ETDEWEB)

Lu, Roger; Wang, Tao; Nygaard, Magne; Bendiksen, Rolf [Aker Solutions, Oslo (Norway)

2012-07-01

Development of new technologies for application of dry tree solutions on semi-submersible hull production platforms opens up new flexible and cost efficient solutions for oil and gas fields in deep and ultra deep water. Aker Solutions has brought the technology through the last steps to a project ready stage. Top tension risers allow for shifting the Christmas tree from seabed to topside, and enables drilling and production from the same unit. By shifting the wellhead and Christmas tree from seabed to platform deck, well maintenance is simplified, and makes the Dry Tree Semi relevant to consider for the Brazilian pre-salt reservoirs. Easy access to the wells for maintenance gives a potential for a higher recovery rate for the field. Future development of ultra deep water oil and gas fields demands solutions overcoming the limitations set by the TLP and the Spar buoy. Combining knowledge from already proven solutions, and a limited addition of new technology, these limitations are overcome with Aker Solutions' Dry Tree Semi. It is designed and proven for Gulf of Mexico environmental conditions. It is verified for conditions with a significant wave height of 14 meters, and able to withstand 100-year extreme weather and 1000-years survival conditions. A conventional semi-submersible platform, but with a deeper draft to further reduce the already low motions, makes the basis for the concept. Top tensioned risers (TTR) with vertical motion compensation stroke of up to 10 meters, makes it possible to shift the Christmas tree from seabed to platform deck. The deep draft design of the hull reduces the wave force excitation on the pontoons, reducing both the roll and pitch dynamics. The Dry Tree Semi represents several major benefits, including low sensitivity to water depth, reduced hull and topside weight, and flexibility in transportation, mooring, and decommissioning. (author)

75 FR 51257 - Public Utility District No. 1 of Douglas County (Douglas PUD); Notice of Application Ready for...

Science.gov (United States)

2010-08-19

... District No. 1 of Douglas County (Douglas PUD); Notice of Application Ready for Environmental Analysis and...: May 27, 2010. d. Applicant: Public Utility District No. 1 of Douglas County (Douglas PUD). e. Name of... in Douglas, Okanogan, and Chelan Counties, Washington. The project currently occupies 15.15 acres of...

Readiness to change criminal women and men

Directory of Open Access Journals (Sweden)

Krzysztof Biel

2017-12-01

Full Text Available The readiness of offenders to social rehabilitation is a new category in our country. Meanwhile, the research conducted in many countries indicates its usefulness in the diagnosis and selection of participants of rehabilitation programmes. This entails more effective interaction with convicted persons and greater responsibility on the part of convicted people for their own social rehabilitation process. The aim of this article is to present the main assumptions and models of readiness for change and their usefulness in social rehabilitation practice and to present pilot studies of readiness for change among criminal women and men in Kraków. Application of the Polish adaptation of the CVTRQ questionnaire made it possible to determine the level of convicted persons’ readiness, taking into account deficits in particular scales of the questionnaire and variables differentiating the group of ready and not ready people. At the end, guidelines for further research will be presented.

Applications of Advanced Technology for Monitoring Forest Carbon to Support Climate Change Mitigation

Science.gov (United States)

Birdsey, R.; Hurtt, G. C.; Dubayah, R.; Hagen, S. C.; Vargas, R.; Nehrkorn, T.; Domke, G. M.; Houghton, R. A.

2015-12-01

Measurement, Reporting, and Verification (MRV) is a broad concept guiding the application of monitoring technology to the needs of countries or entities for reporting and verifying reductions in greenhouse gas emissions or increases in greenhouse gas sinks. Credibility, cost-effectiveness, and compatibility are important features of global MRV efforts that can support implementation of climate change mitigation programs such as Reducing Emissions from Deforestation and Forest Degradation and Sustainable Forest Management (REDD+). Applications of MRV technology may be tailored to individual country circumstances following guidance provided by the Intergovernmental Panel on Climate Change; hence, there is no single approach that is uniquely viable but rather a range of ways to integrate new MRV methods. MRV technology is advancing rapidly with new remote sensing and advanced measurement of atmospheric CO2, and in situ terrestrial and ocean measurements, coupled with improvements in data analysis, modeling, and assessing uncertainty. Here we briefly summarize some of the most application-ready MRV technologies being developed under NASA's Carbon Monitoring System (CMS) program, and illustrate how these technologies may be applied for monitoring forests using several case studies that span a range of scales, country circumstances, and stakeholder reporting requirements. We also include remarks about the potential role of advanced monitoring technology in the context of the global climate accord that is expected to result from the 21st session of the Conference of the Parties to the United Nations Framework Convention on Climate Change, which is expected to take place in December 2015, in Paris, France.

Emotional Intelligence as a Determinant of Readiness for Online Learning

Science.gov (United States)

Buzdar, Muhammad Ayub; Ali, Akhtar; Tariq, Riaz Ul Haq

2016-01-01

Students' performance in online learning environments is associated with their readiness to adopt a digital learning approach. Traditional concept of readiness for online learning is connected with students' competencies of using technology for learning purposes. We in this research, however, investigated psychometric aspects of students'…

75 FR 28594 - Ready-to-Learn Television Program

Science.gov (United States)

2010-05-21

... DEPARTMENT OF EDUCATION [CFDA Number 84.295A] Ready-to-Learn Television Program AGENCY: Office of Innovation and Improvement, Department of Education. ACTION: Notice inviting applications for new awards for... INFORMATION CONTACT: The Ready-to-Learn Television Program, U.S. Department of Education, 400 Maryland Avenue...

Application of food irradiation technology in development of future special purposed foods

Energy Technology Data Exchange (ETDEWEB)

Byun, Myung Woo; Shin, Myung Gon [Woosong University, Daejeon (Korea, Republic of); Lee, Ju Woon [Korea Atomic Energy Research Institute, Jeongeup (Korea, Republic of)

2010-06-15

Advanced food technologies fused with radiation technology could be applied to the development of various special-purpose foods such space foods, combat rations, emergency foods, and sterile patient meals. In U.S.A, the National Aeronautics and Space Administration and the U.S. Army Natick Soldier RD and E Center co-developed the hazard analysis of critical control point, which is a essential hygienic control system in food industry. Moreover, strict manufacturing standards to produce shelf-stable foods using radiation (ionizing energy) technology were established. In Korea, the advanced food technologies to sterilize various foods using irradiation technology were expected to be applied as a hygiene process on group meals and ready-to-eat/ready-to cook foods, and to produce foods for patients with high hygienic, nutritional, and organoleptic qualities through the combination treatments with irradiation technology. And, it was considered that the advanced technology would improve the related industries and national economy by introducing the food irradiation technology to the Korean traditional fermented foods to improve their functionality. In conclusion, the advanced food technologies which are preoccupied by some developed countries like U.S.A. and Russia will make a contribution to the development of national science and technology, and competitiveness promotion of industry.

Application of food irradiation technology in development of future special purposed foods

International Nuclear Information System (INIS)

Byun, Myung Woo; Shin, Myung Gon; Lee, Ju Woon

2010-01-01

Advanced food technologies fused with radiation technology could be applied to the development of various special-purpose foods such space foods, combat rations, emergency foods, and sterile patient meals. In U.S.A, the National Aeronautics and Space Administration and the U.S. Army Natick Soldier RD and E Center co-developed the hazard analysis of critical control point, which is a essential hygienic control system in food industry. Moreover, strict manufacturing standards to produce shelf-stable foods using radiation (ionizing energy) technology were established. In Korea, the advanced food technologies to sterilize various foods using irradiation technology were expected to be applied as a hygiene process on group meals and ready-to-eat/ready-to cook foods, and to produce foods for patients with high hygienic, nutritional, and organoleptic qualities through the combination treatments with irradiation technology. And, it was considered that the advanced technology would improve the related industries and national economy by introducing the food irradiation technology to the Korean traditional fermented foods to improve their functionality. In conclusion, the advanced food technologies which are preoccupied by some developed countries like U.S.A. and Russia will make a contribution to the development of national science and technology, and competitiveness promotion of industry

StormReady in a Box: Enhancing NOAA's Presence in Schools

Science.gov (United States)

Grondin, N. S.; Franks, C.

2015-12-01

The National Weather Service StormReady Supporter program exists to give schools, companies, TV stations, and other facilities the opportunity to earn recognition for their weather preparedness and awareness. Requirements to earn StormReady Supporter status include having a facility warning point, use of NOAA Weather Radios, and weather hazard Emergency Operation Plans. Despite the increasing importance of weather preparedness in schools, only 1.2% of Minnesota schools are deemed StormReady by the National Weather Service. It was determined that the major impedance for schools becoming StormReady Supporters is the lack of time for administrators to engage in anything "extra" beyond their listed duties. As part of a 2015 Hollings Scholar project, the StormReady in a Box concept was developed to remedy this, by empowering teachers and students to take charge and complete the StormReady Supporter application for their school. StormReady in a Box is a project developed for Junior High School students to learn about weather preparedness and to help their school acquire StormReady status. The project was designed to be relevant to the Minnesota State Education Standards in Science, be simple for teachers to do with their students, and most importantly, to be enjoyable for Junior High School age students to do. The project was also designed to enhance critical thinking skills and logical reasoning abilities, as they relate to the StormReady Supporter application. This presentation will present the overall rationale for the undertaking of this project, the creation of, and the logical next steps for the StormReady in a Box project.

Capture ready fossil fuel plants: a critical stage in tackling climate change

Energy Technology Data Exchange (ETDEWEB)

Gibbins, J.; Jia Li; Xi Liang [Imperial College, London (United Kingdom). Energy Technology for Sustainable Development Group

2006-07-01

Ways in which gasification-based systems can approach the CO{sub 2} capture ready ideal is discussed, together with possible methods for assessing the optimum degree of capture readiness. A key technology choice for power plants is whether or not to incorporate a shift before capture. Financial returns for making plants capture ready are also discussed. 10 refs., 3 tabs.

The Development of Sloyd Teacher Students’ Self-Directed Learning Readiness

Directory of Open Access Journals (Sweden)

Mika Metsärinne

2012-09-01

Full Text Available This research is the first part of a longitudinal study of sloyd teacher students’ self-directed learning of craft & technology studies at the end of bachelor level throughout three decades in Finland. Sloyd education is the main subject in the sloyd teacher study program in University of Turku and Åbo Akademi University in Finland. These sloyd teacher study programs progresses to the master’s level of education and provides readiness to teach the school subject sloyd in comprehensive and high schools. This study is focused mainly of the craft and technology combination in purposes of sloyd education in university of Turku. The studies consists mainly of wood, plastic, metal, information and textile technologies, mechanical engineering, electricity and some basics of automation technologies, research methodologies, pedagogics and product planning. The aim of the present research was to study whether there are any Self-Directed Learning Readiness (SDLR differences between the craft & technology studies of sloyd teacher students in the year 1992 and 2002. The main result was that the 92-group had higher SDLR -points compared to the 02-group. The main conclusion is that craft & technology studies require plenty of time for students’ development of self –directed learning that is adequate for sloyd teacher education.Key words: Sloyd education, Self-direction learning; self-directed learning readiness, Sloyd (craft & technology teacher education

NASA technology applications team: Applications of aerospace technology

Science.gov (United States)

1993-01-01

This report covers the activities of the Research Triangle Institute (RTI) Technology Applications Team for the period 1 October 1992 through 30 September 1993. The work reported herein was supported by the National Aeronautics and Space Administration (NASA), Contract No. NASW-4367. Highlights of the RTI Applications Team activities over the past year are presented in Section 1.0. The Team's progress in fulfilling the requirements of the contract is summarized in Section 2.0. In addition to our market-driven approach to applications project development, RTI has placed increased effort on activities to commercialize technologies developed at NASA Centers. These Technology Commercialization efforts are summarized in Section 3.0. New problem statements prepared by the Team in the reporting period are presented in Section 4.0. The Team's transfer activities for ongoing projects with the NASA Centers are presented in Section 5.0. Section 6.0 summarizes the status of four add-on tasks. Travel for the reporting period is described in Section 7.0. The RTI Team staff and consultants and their project responsibilities are listed in Appendix A. Appendix B includes Technology Opportunity Announcements and Spinoff! Sheets prepared by the Team while Appendix C contains a series of technology transfer articles prepared by the Team.

Determinants of readiness to adopt mHealth in a rural community of Bangladesh.

Science.gov (United States)

Khatun, Fatema; Heywood, Anita E; Ray, Pradeep K; Hanifi, S M A; Bhuiya, Abbas; Liaw, Siaw-Teng

2015-10-01

Evidence in favor of mHealth for healthcare delivery in settings where trained health workforce is limited or unavailable is accumulating. With rapid growth in access to mobile phones and an acute shortage of health workforce in Bangladesh, mHealth initiatives are increasing with more than 20 current initiatives in place. "Readiness" is a crucial prerequisite to the successful implementation of telehealth programs. However, systematic assessment of the community readiness for mHealth-based services in the country is lacking. We report on a recent study describing the influence of community readiness for mHealth of a rural Bangladesh community. A conceptual framework for mHealth readiness was developed, which included three categories: technological, motivational and resource readiness. This guided the questionnaire development for the survey conducted in the Chakaria sub-district of Bangladesh from November 2012 to April 2013. Multivariate logistic regression was used to examine ownership of mobile phones, use of the technology, and knowledge regarding awareness of mHealth services as predictors of the community readiness to adopt mHealth. A total of 4915 randomly selected household members aged 18 years and over completed the survey. The data explained the sub-categories of the readiness dimensions. In terms of access, 45% of respondents owned a mobile phone with ownership higher among males, younger participants and those in the highest socioeconomic quintiles. Results related to technological readiness showed that among mobile phone owners, 50% were aware of SMS but only sending and receiving SMS. Only 37% generally read the received SMS. Only 5% of respondents used the internet capabilities on their phone and 25% used voice messages. The majority (73%) of the participants were interested in joining mHealth programs in the future. Multivariate analysis showed that ownership of a mobile phone (aOR 1.3, 95% CI 1.1-1.5), younger age (aOR 2.6, 95% CI 2.1-3.3), males

Readiness and Acceptability of Information and Communication Technology Integration in Basic Education

Directory of Open Access Journals (Sweden)

CHARLIE P. NACARIO

2014-02-01

Full Text Available A research study was conducted to determine the readiness and acceptability of information and communication technology (ICT integration in six internet connected Public High Schools (ischools in Camarines Sur. It also aimed to determine the ICT knowledge, skills and attitude of faculty and students in ischools, ICT trainings and competencies of teachers and availability of ICT facilities in the schools and community. Purposive sampling was used in determining the respondents of the study and quantitative statistical tools such as frequency counts, percentage rates and weighted means were used in analyzing the data. Findings revealed that faculty and students in two out of the six schools were highly knowledgeable and highly skilled in ICT hardware and software components identification but only one school was found to be highly competent on ICT usage. All faculty members in one school integrated ICT in teaching English, Math, Science and TLE however, no school integrated ICT in Social Studies. The availability of ICT resources and the provision of initial ICT trainings to faculty and students in ischools contributed to ICT integration in teaching. The initial level of ICT integration in teaching is indicative of faculty and students’ readiness and acceptance of ICT tools in teaching-learning environment. Recommendations in the study were conduct of retraining courses on ICT; development of ICT-based teaching modules in Social Studies; conduct future studies that would test relationship between socio-demographic profile and ICT integration in teaching; and correlate ICT competencies of students in achievement tests in English, Math, and Science among ischools.

Technology Applications Team: Applications of aerospace technology

Science.gov (United States)

1993-01-01

Highlights of the Research Triangle Institute (RTI) Applications Team activities over the past quarter are presented in Section 1.0. The Team's progress in fulfilling the requirements of the contract is summarized in Section 2.0. In addition to our market-driven approach to applications project development, RTI has placed increased effort on activities to commercialize technologies developed at NASA Centers. These Technology Commercialization efforts are summarized in Section 3.0. New problem statements prepared by the Team in the reporting period are presented in Section 4.0. The Team's transfer activities for ongoing projects with the NASA Centers are presented in Section 5.0. Section 6.0 summarizes the status of four add-on tasks. Travel for the reporting period is described in Section 7.0. The RTI Team staff and consultants and their project responsibilities are listed in Appendix A. The authors gratefully acknowledge the contributions of many individuals to the RTI Technology Applications Team program. The time and effort contributed by managers, engineers, and scientists throughout NASA were essential to program success. Most important to the program has been a productive working relationship with the NASA Field Center Technology Utilization (TU) Offices. The RTI Team continues to strive for improved effectiveness as a resource to these offices. Industry managers, technical staff, medical researchers, and clinicians have been cooperative and open in their participation. The RTI Team looks forward to continuing expansion of its interaction with U.S. industry to facilitate the transfer of aerospace technology to the private sector.

Y2K compliance readiness and contingency planning.

Science.gov (United States)

Stahl, S; Cohan, D

1999-09-01

As the millennium approaches, discussion of "Y2K compliance" will shift to discussion of "Y2K readiness." While "compliance" focuses on the technological functioning of one's own computers, "readiness" focuses on the operational planning required in a world of interdependence, in which the functionality of one's own computers is only part of the story. "Readiness" includes the ability to cope with potential Y2K failures of vendors, suppliers, staff, banks, utility companies, and others. Administrators must apply their traditional skills of analysis, inquiry and diligence to the manifold imaginable challenges which Y2K will thrust upon their facilities. The SPICE template can be used as a systematic tool to guide planning for this historic event.

Readiness for Meaningful Use of Health Information Tech...

Data.gov (United States)

U.S. Department of Health & Human Services — According to findings reported in Readiness for Meaningful Use of Health Information Technology and Patient Centered Medical Home Recognition Survey Results,...

Principles of formation of mobile dwelling of cluster type with application of additive technologies

Directory of Open Access Journals (Sweden)

Panfilov Alexander

2017-01-01

Full Text Available One of the most acute problems of modern society are issues related to the globalization of mankind caused by the next small scientific and technological revolution that is taking place and the emerging transition to a post-industrial society. Some of their characteristic features of this society are: deterritoriality, weakening of functional-spatial ties between places of residence, the application of labor and recreation rights. The peculiarity of the emerging new architecture with the arrival of the postindustrial information society is becoming completely new approaches to the formation of cities and the human dwelling itself. The article deals with the application of additive technologies in the production of mobile residential objects of high factory readiness. The article describes the concept of the formation of a mobile dwelling cluster type based on the principles of the organization of intelligent self-adapting systems (Smart Development, gives examples of author’s developments in the field of cluster housing, with a description of the fundamental principles necessary for the possibility of further development and technical implementation.

Process operational readiness and operational readiness follow-on

International Nuclear Information System (INIS)

Nertney, R.J.

1992-11-01

The first document in the System Safety Development Center (SSDC) series deals with the subject of Occupancy-Use Readiness. The material included in that manual provided the basis for development of the SSDC workshop in Operational Readiness. The original Occupancy Readiness Manual, however, deals only generally with the subject of process safety; i.e., the safety of overall ''processes'' such as solar collection systems, nuclear reactors, and coal fired electrical plants. The manual also fails to detail the considerations involved in maintaining the state of readiness on a continuing basis. Both of the latter subjects are dealt with in some detail in the SSDC's Operational Readiness Workshop. The purpose of this document is to provide additional documentary material dealing with subjects introduced in SSDC-1 Occupancy-Use Readiness Manual, and SSDC-12, Safety Considerations in Evaluation of Maintenance Programs. In augmenting SSDC-1, Part I of this manual provides additional material related to process safety; in the case of SSDC-12, the subject of safety considerations in evaluation of maintenance programs is broadened in Part II to include maintenance of personnel systems and procedural systems as well as hardware. ''Maintenance'' is related more directly to the concept of operational readiness and an alternative analytical tree is provided for hardware maintenance program evaluation

The Impact of Student Teaching Experience on Pre-Service Teachers' Readiness for Technology Integration: A Mixed Methods Study with Growth Curve Modeling

Science.gov (United States)

Sun, Yan; Strobel, Johannes; Newby, Timothy J.

2017-01-01

Adopting a two-phase explanatory sequential mixed methods research design, the current study examined the impact of student teaching experiences on pre-service teachers' readiness for technology integration. In phase-1 of quantitative investigation, 2-level growth curve models were fitted using online repeated measures survey data collected from…

Assessing students' readiness towards e-learning

Science.gov (United States)

Rahim, Nasrudin Md; Yusoff, Siti Hawa Mohd; Latif, Shahida Abd

2014-07-01

The usage of e-Learning methodology has become a new attraction for potential students as shown by some higher learning institutions in Malaysia. As such, Universiti Selangor (Unisel) should be ready to embark on e-Learning teaching and learning in the near future. The purpose of the study is to gauge the readiness of Unisel's students in e-Learning environment. A sample of 110 students was chosen to participate in this study which was conducted in January 2013. This sample consisted of students from various levels of study that are foundation, diploma and degree program. Using a structured questionnaire, respondents were assessed on their basic Internet skills, access to technology required for e-Learning and their attitude towards characteristics of successful e-Learning student based on study habits, abilities, motivation and time management behaviour. The result showed that respondents did have access to technology that are required for e-Learning environment, and respondents were knowledgeable regarding the basic Internet skills. The finding also showed that respondents' attitude did meet all characteristics of successful e-Learning student. Further analysis showed that there is no significant relationshipeither among gender, level of study or faculty with those characteristics. As a conclusion, the study shows that current Unisel's students are ready to participate in e-Learning environment if the institution decided to embark on e-Learning methodology.

Decision Gate Process for Assessment of a NASA Technology Development Portfolio

Science.gov (United States)

Kohli, Rajiv; Fishman, Julianna L.; Hyatt, Mark J.

2012-01-01

The NASA Dust Management Project (DMP) was established to provide technologies (to Technology Readiness Level (TRL) 6) required to address adverse effects of lunar dust to humans and to exploration systems and equipment, to reduce life cycle cost and risk, and to increase the probability of sustainable and successful lunar missions. The technology portfolio of DMP consisted of different categories of technologies whose final product was either a technology solution in itself, or one that contributes toward a dust mitigation strategy for a particular application. A Decision Gate Process (DGP) was developed to assess and validate the achievement and priority of the dust mitigation technologies as the technologies progress through the development cycle. The DGP was part of continuous technology assessment and was a critical element of DMP risk management. At the core of the process were technology-specific criteria developed to measure the success of each DMP technology in attaining the technology readiness levels assigned to each decision gate. The DGP accounts for both categories of technologies and qualifies the technology progression from technology development tasks to application areas. The process provided opportunities to validate performance, as well as to identify non-performance in time to adjust resources and direction. This paper describes the overall philosophy of the DGP and the methodology for implementation for DMP, and describes the method for defining the technology evaluation criteria. The process is illustrated by example of an application to a specific DMP technology.

Bioprinting: an assessment based on manufacturing readiness levels.

Science.gov (United States)

Wu, Changsheng; Wang, Ben; Zhang, Chuck; Wysk, Richard A; Chen, Yi-Wen

2017-05-01

Over the last decade, bioprinting has emerged as a promising technology in the fields of tissue engineering and regenerative medicine. With recent advances in additive manufacturing, bioprinting is poised to provide patient-specific therapies and new approaches for tissue and organ studies, drug discoveries and even food manufacturing. Manufacturing Readiness Level (MRL) is a method that has been applied to assess manufacturing maturity and to identify risks and gaps in technology-manufacturing transitions. Technology Readiness Level (TRL) is used to evaluate the maturity of a technology. This paper reviews recent advances in bioprinting following the MRL scheme and addresses corresponding MRL levels of engineering challenges and gaps associated with the translation of bioprinting from lab-bench experiments to ultimate full-scale manufacturing of tissues and organs. According to our step-by-step TRL and MRL assessment, after years of rigorous investigation by the biotechnology community, bioprinting is on the cusp of entering the translational phase where laboratory research practices can be scaled up into manufacturing products specifically designed for individual patients.

High-dose irradiated food: Current progress, applications, and prospects

Science.gov (United States)

Feliciano, Chitho P.

2018-03-01

Food irradiation as an established and mature technology has gained more attention in the food industry for ensuring food safety and quality. Primarily used for phytosanitary applications, its use has been expanded for developing various food products for varied purposes (e.g. ready-to-eat & ready-to-cook foods, hospital diets, etc.). This paper summarized and analyzed the recent progress and application of high-dose irradiation and discussed its prospects in the field of food product development, its safety and quality.

Advancing E-Commerce Beyond Readiness in a Developing Country: Experiences of Ghanaian Firms

OpenAIRE

Richard Boateng; Richard Heeks; Alemayehu Molla; Robert Hinson

2011-01-01

This paper identifies factors affecting the assimilation of electronic commerce in Ghana and the solutions that Ghanaian firms have developed. Drawing from the elements of two electronic commerce readiness frameworks, the study analyzes the readiness of Ghana to support the conduct of electronic commerce at the firm-level. The study covers the government, technology, market and culture readiness factors. Findings suggest that social networks, managerial capabilities and government commitment ...

DEFENSE SCIENCE AND TECHNOLOGY Adopting Best Practices Can Improve Innovation Investments and Management

Science.gov (United States)

2017-06-01

Defense Technology Development: Technology Transition Programs Support Military Users, but Opportunities Exist to Improve Measurement of Outcomes, GAO-13... LTE ), for cellular wireless communication applications. They also develop and commercialize numerous technologies used in handsets and tablets. They...17-499 Note: Technology Readiness Levels (TRL) are a tool that DOD, among others, uses to assess technology maturity. TRLs are measured on a scale

How user diversity and country of origin impact the readiness to adopt E-health technologies: an intercultural comparison.

Science.gov (United States)

Wilkowsk, Wiktoria; Ziefle, Martina; Alagöz, Firat

2012-01-01

In recent years, due to the demographical change and the resulting overload of healthcare systems, there has been an increasing interest focusing on the global proliferation of assistive medical technologies (=E-health) in home environments. The present study examines how users' diversity influences the readiness to adopt novel medical technologies, comparing users' attitudes in terms of perceived advantages and disadvantages in three technically and culturally different countries: Germany, Poland and Turkey. This investigation also intended to verify if acceptance of information and communication technologies is associated with the sensitive acceptance of E-health. Results revealed overall a considerably higher motivation to use medical technology compared to perceived barriers, with Polish users more willing to use E-health, higher than German or Turkish ones. Older participants showed a highly positive attitude, comparable to young and middle-aged respondents' receptiveness, differing from the latter in terms of greater appreciation of the advantage of higher independency when being supported by medical technology. With respect to gender, woman showed higher motivation to use E-health technology than men, although utilization barriers were not gendered. Following these results, an unconditional transfer of acceptance from information and communication to medical technology is not justified.

THE IMPORTANCE OF EDUCATIONAL TECHNOLOGY IN TEACHING

Directory of Open Access Journals (Sweden)

Lazar Stošić

2015-06-01

Full Text Available Today, more than ever, the role of educational technology in teaching is of great importance because of the use of information and communication technologies. With the help of various applications for distance education, the Internet, teachers, and students themselves, they see the advantage of educational technology. The question is whether schools and teachers themselves are ready for the use of technology in education and whether they are aware of its benefits? In this paper, we try to give an overview of the importance and use of educational technology in the classroom.

The Java Management Extensions (JMX) Is Your Cluster Ready for Evolution?

CERN Document Server

Jaén-Martínez, J

2000-01-01

The arrival of commodity hardware configurations with performance rivaling that offered by RISC workstations is resulting in important advances in the state of the art of building and running very large scalable clusters at "mass market" pricing levels. However, cluster middleware layers are still considered as static infrastructures which are not ready for evolution. In this paper, we claim that middleware layers based on both agent and Java technologies offer new opportunities to support clusters where services can be dynamically added, removed and reconfigured. To support this claim, we present the Java Management Extensions (JMX), a new Java agent based technology, and its application to implement two disjoint cluster management middleware services (a remote reboot service and a distributed infrastructure for collecting Log events) which share a unique agent-based infrastructure.

Technological laser application

International Nuclear Information System (INIS)

Shia, D.O.; Kollen, R.; Rods, U.

1980-01-01

Problems of the technological applications of lasers are stated in the popular form. Main requirements to a technological laser as well as problems arising in designing any system using lasers have been considered. Areas of the laser applications are described generally: laser treatment of materials, thermal treatment, welding, broach and drilling of holes, scribing, microtreatment and adjustment of resistors, material cutting, investigations into controlled thermonuclear fussion

Evaluation of Readiness for Distance Education of Students in European Universities

Directory of Open Access Journals (Sweden)

Daina Vasilevska

2017-04-01

Full Text Available Distance learning environment with its different approaches has become one of the most researched paradigms in the late years. Different technologies have been developed and introduced into these systems, but at the same time, a spectrum of use-cases has been offered for this model. This paper aims at addressing the most important problem facing with the distance learning eco-system, namely its evaluation. The evaluation process has been undertaken in different European countries, such as Latvia, Lithuania, Serbia, Poland, Belarus, and Romania. The obtained results show that not all of the students are at the same level of readiness when it comes to distance education, there are no criteria developed for the evaluation of the students' readiness to this education model. For the purpose of this study, authors suggest that readiness to distance education includes knowledge, skills, and abilities that are necessary for students to successfully possess while using the technologies of distance education. After the analysis of the results of this research, the authors developed a structure and described elements that define the level of students' readiness to distance education.

The CFFTP technology applications program

International Nuclear Information System (INIS)

Anon.

1984-01-01

The Canadian Fusion Fuels Technology Project (CFFTP) was originally conceived as having a Technology Applications Program to help fulfill its mandate of extending and adapting existing Canadian technology for use in international fusion programs. This technology was determined to be materials, breeder technology, remote handling, health and saftey, and tritium fuel systems. The CFFTP Applications Program has done work for the STARFIRE, MARS and TFTR reactors as well as developing two computer codes for tritium fuel systems. In the future the Technology Applications Program will be involved in the Tokamak Fusion Core Experiment (TFCX) as well as work for NET, JET and Frascati

How Satellites Have Contributed to Building a Weather Ready Nation

Science.gov (United States)

Lapenta, W.

2017-12-01

NOAA's primary mission since its inception has been to reduce the loss of life and property, as well as disruptions from, high impact weather and water-related events. In recent years, significant societal losses resulting even from well forecast extreme events have shifted attention from the forecast alone toward ensuring societal response is equal to the risks that exist for communities, businesses and the public. The responses relate to decisions ranging from coastal communities planning years in advance to mitigate impacts from rising sea level, to immediate lifesaving decisions such as a family seeking adequate shelter during a tornado warning. NOAA is committed to building a "Weather-Ready Nation" where communities are prepared for and respond appropriately to these events. The Weather-Ready Nation (WRN) strategic priority is building community resilience in the face of increasing vulnerability to extreme weather, water, climate and environmental threats. To build a Weather-Ready Nation, NOAA is enhancing Impact-Based Decision Support Services (IDSS), transitioning science and technology advances into forecast operations, applying social science research to improve the communication and usefulness of information, and expanding its dissemination efforts to achieve far-reaching readiness, responsiveness and resilience. These four components of Weather-Ready Nation are helping ensure NOAA data, products and services are fully utilized to minimize societal impacts from extreme events. Satellite data and satellite products have been important elements of the national Weather Service (NWS) operations for more than 40 years. When one examines the uses of satellite data specific to the internal forecast and warning operations of NWS, two main applications are evident. The first is the use of satellite data in numerical weather prediction models; the second is the use of satellite imagery and derived products for mesoscale and short-range weather warning and

Readiness Review of BWXT for Fabrication of AGR 5/6/7 Compacts

Energy Technology Data Exchange (ETDEWEB)

Marshall, Douglas William [Idaho National Lab. (INL), Idaho Falls, ID (United States); Sharp, Michelle Tracy [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2017-02-01

In support of preparations for fabricating compacts for the Advanced Gas Reactor (AGR) fuel qualification irradiation experiments (AGR-5/6/7), Idaho National Laboratory (INL) conducted a readiness review of the BWX Technology (BWXT) procedures, processes, and equipment associated with compact fabrication activities at the BWXT Nuclear Operations Group (BWXT-NOG) facility outside Lynchburg, VirginiaVA. The readiness review used quality assurance requirements taken from the American Society of Mechanical Engineers (ASME) Nuclear Quality Assurance Standard (NQA-1-2008/1a-2009) as a basis to assess readiness to start compact fabrication.

Safe, Healthy and Ready to Succeed: Arizona School Readiness Key Performance Indicators

Science.gov (United States)

Migliore, Donna E.

2006-01-01

"Safe, Healthy and Ready to Succeed: Arizona School Readiness Key Performance Indicators" presents a set of baseline measurements that gauge how well a statewide system of school readiness supports is addressing issues that affect Arizona children's readiness for school. The Key Performance Indicators (KPIs) measure the system, rather…

PV ready roofing systems

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

The integration of PV technology into roofs of houses has become very popular in the United States, Japan, Germany and The Netherlands. There could be a considerable market in the UK for these systems, given the large number of houses that are projected to be built in the next 10 years, and taking account of increased awareness of energy issues. A significant proportion of the market share of annual installed PV is for solar PV systems installed into homes (currently 15%), this is expected to rise to 23% (900MW) by 2010. The grid connected roof and building mounted facade systems represent the fastest growing market for PV systems in Europe. In conclusion, therefore, innovative approached for fixing PV technology onto roofs have been identified for both domestic roofs and for the commercial sector. With reference to production methodologies within the roofing industry, both approaches should be capable of being designed with PV-ready connections suitable for fixing PV modules at a later date. This will help overcome the key barriers of cost of installation, skills required and the lack of retrofit potential. Based on the results of this project, Sustainable Energy together with PV Systems are keen to take forward the full research and development of PV-ready systems for both the domestic and commercial sectors.

Nurses’ perspectives on readiness of organizations for change: a comparative study

Directory of Open Access Journals (Sweden)

Amarneh BH

2017-04-01

Full Text Available Basil Hameed Amarneh Department of Psychiatric and Community Health Nursing, Faculty of Nursing, Jordan University of Science and Technology, Irbid, Jordan Purpose: The purpose of this study is to evaluate readiness for change perceived by nurses at Jordanian hospitals according to the hospital type and the gender of nurse.Background: There are misconceptions about readiness for change, and only a few health care and nursing studies about organizational readiness for change have been conducted. Nurses’ perceptions of their organizations’ readiness for change are important; they help in introducing, managing, and maintaining the change.Methods: Using a quantitative comparative research design and a validated survey, data were collected in 2010 from a convenience sample of 130 nurses from four government and three private hospitals with a response rate of 59%.Results: There are some issues in Jordanian hospitals, which show that change has to be managed well. Nurses in government hospitals and female nurses perceived their hospitals to be more ready for change, compared with those in private hospitals and male nurses.Conclusion: Government hospitals were more ready to change than private hospitals, particularly in supporting collaborative and multidisciplinary team approaches to patient care. More than male nurses, female nurses perceived that their organizations were ready to use or plan to use advanced practice nurses. One of the recommendations is a need for targeted intervention to improve readiness for change. Keywords: readiness for change, organizations, hospitals, nurses, Jordan

Examining the potential of information technology to improve public insurance application processes: enrollee assessments from a concurrent mixed method analysis.

Science.gov (United States)

Mishra, Abhay Nath; Ketsche, Patricia; Marton, James; Snyder, Angela; McLaren, Susan

2014-01-01

To assess the perceived readiness of Medicaid and Children's Health Insurance Program (CHIP) enrollees to use information technologies (IT) in order to facilitate improvements in the application processes for these public insurance programs. We conducted a concurrent mixed method study of Medicaid and CHIP enrollees in a southern state. We conducted focus groups to identify enrollee concerns regarding the current application process and their IT proficiency. Additionally, we surveyed beneficiaries via telephone about their access to and use of the Internet, and willingness to adopt IT-enabled processes. 2013 households completed the survey. We used χ(2) analysis for comparisons across different groups of respondents. A majority of enrollees will embrace IT-enabled enrollment, but a small yet significant group continues to lack access to facilitating technologies. Moreover, a segment of beneficiaries in the two programs continues to place a high value on personal interactions with program caseworkers. IT holds the promise of improving efficiency and reducing barriers for enrollees, but state and federal agencies managing public insurance programs need to ensure access to traditional processes and make caseworkers available to those who require and value such assistance, even after implementing IT-enabled processes. The use of IT-enabled processes is essential for effectively managing eligibility and enrollment determinations for public programs and private plans offered through state or federally operated exchanges. However, state and federal officials should be cognizant of the technological readiness of recipients and provide offline help to ensure broad participation in the insurance market. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Technology applications bulletins

International Nuclear Information System (INIS)

Koncinski, W. Jr.

1989-02-01

Martin Marietta Energy Systems, Inc. (Energy Systems), operates five facilities for the US Department of Energy (DOE): the Oak Ridge National Laboratory (ORNL), which is a large, multidisciplinary research and development (R and D) center whose primary mission is energy research; the Oak Ridge Y-12 Plant, which engages in defense research, development, and production; and the uranium-enrichment plants at Oak Ridge; Paducah, Kentucky; and Portsmouth, Ohio. Much of the research carried out at these facilities is of interest to industry and to state or local governments. To make information about this research available, the Energy Systems Office of Technology Applications publishes brief descriptions of selected technologies and reports. These technology applications bulletins describe the new technology and inform the reader about how to obtain further information, gain access to technical resources, and initiate direct contact with Energy Systems researchers

Nuclear explosives testing readiness evaluation

Energy Technology Data Exchange (ETDEWEB)

Valk, T.C.

1993-09-01

This readiness evaluation considers hole selection and characterization, verification, containment issues, nuclear explosive safety studies, test authorities, event operations planning, canister-rack preparation, site preparation, diagnostic equipment setup, device assembly facilities and processes, device delivery and insertion, emplacement, stemming, control room activities, readiness briefing, arming and firing, test execution, emergency response and reentry, and post event analysis to include device diagnostics, nuclear chemistry, and containment. This survey concludes that the LLNL program and its supporting contractors could execute an event within six months of notification, and a second event within the following six months, given the NET group`s evaluation and the following three restraints: (1) FY94 (and subsequent year) funding is essentially constant with FY93, (2) Preliminary work for the initial event is completed to the historical sic months status, (3) Critical personnel, currently working in dual use technologies, would be recallable as needed.

SHARED TECHNOLOGY TRANSFER PROGRAM

Energy Technology Data Exchange (ETDEWEB)

GRIFFIN, JOHN M. HAUT, RICHARD C.

2008-03-07

The program established a collaborative process with domestic industries for the purpose of sharing Navy-developed technology. Private sector businesses were educated so as to increase their awareness of the vast amount of technologies that are available, with an initial focus on technology applications that are related to the Hydrogen, Fuel Cells and Infrastructure Technologies (Hydrogen) Program of the U.S. Department of Energy. Specifically, the project worked to increase industry awareness of the vast technology resources available to them that have been developed with taxpayer funding. NAVSEA-Carderock and the Houston Advanced Research Center teamed with Nicholls State University to catalog NAVSEA-Carderock unclassified technologies, rated the level of readiness of the technologies and established a web based catalog of the technologies. In particular, the catalog contains technology descriptions, including testing summaries and overviews of related presentations.

Multimedia database retrieval technology and applications

CERN Document Server

Muneesawang, Paisarn; Guan, Ling

2014-01-01

This book explores multimedia applications that emerged from computer vision and machine learning technologies. These state-of-the-art applications include MPEG-7, interactive multimedia retrieval, multimodal fusion, annotation, and database re-ranking. The application-oriented approach maximizes reader understanding of this complex field. Established researchers explain the latest developments in multimedia database technology and offer a glimpse of future technologies. The authors emphasize the crucial role of innovation, inspiring users to develop new applications in multimedia technologies

Recommendations for Tritium Science and Technology Research and Development in Support of the Tritium Readiness Campaign, TTP-7-084

Energy Technology Data Exchange (ETDEWEB)

Senor, David J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2013-10-30

Between 2006 and 2012 the Tritium Readiness Campaign Development and Testing Program produced significant advances in the understanding of in-reactor TPBAR performance. Incorporating these data into existing TPBAR performance models has improved permeation predictions, and the discrepancy between predicted and observed tritium permeation in the WBN1 coolant has been decreased by about 30%. However, important differences between predicted and observed permeation still remain, and there are significant knowledge gaps that hinder the ability to reliably predict other aspects of TPBAR performance such as tritium distribution, component integrity, and performance margins. Based on recommendations from recent Tritium Readiness Campaign workshops and reviews coupled with technical and programmatic priorities, high-priority activities were identified to address knowledge gaps in the near- (3-5 year), middle- (5-10 year), and long-term (10+ year) time horizons. It is important to note that there are many aspects to a well-integrated research and development program. The intent is not to focus exclusively on one aspect or another, but to approach the program in a holistic fashion. Thus, in addition to small-scale tritium science studies, ex-reactor tritium technology experiments such as TMED, and large-scale in-reactor tritium technology experiments such as TMIST, a well-rounded research and development program must also include continued analysis of WBN1 performance data and post-irradiation examination of TPBARs and lead use assemblies to evaluate model improvements and compare separate-effects and integral component behavior.

Readiness factors for information system strategic planning among universities in developing countries: a systematic review

Science.gov (United States)

Irfan, M.; Putra, S. J.; Alam, C. N.; Subiyakto, A.; Wahana, A.

2018-03-01

The implementation of information system strategic planning (ISSP) in higher education institutions is to improve work efficiency, management effectiveness in order to improve organizational competitive advantage. However, the question of whether all universities are ready to implement ISSP as a way to achieve organizational goals has not been answered. This study aims to investigate the readiness phenomena through literature study. The method used is by using the Systematic Literature Review (SLR) instrument to identify readiness factors on the implementation of ISSP, especially among the institutions of higher education in developing countries. This study has identified 10 readiness measurement. There are three categories of measurement, namely people, processes and technologies that represent 11 factors of ISSP readiness measurement in universities.

Leveraging Advanced Technology in Army and Air Force Readiness and Sustainment Training

National Research Council Canada - National Science Library

Lindsey, Kathy

2003-01-01

Operational readiness and sustainment training allow military forces to be prepared for various types of contingency operations and provide for the primary means of protection and defense of United...

A Proposed for Assessing Hotel E-Readiness for Tourism in Southern Thailand

Directory of Open Access Journals (Sweden)

Piman Sirot

2016-01-01

Full Text Available This article only focuses on an overview of the Hotel E-readiness model and model design for tourism in Southern Thailand. “The convergence of information technology (IT and communications technology (CT” will be an important part of these technological innovations. The global economy has been turbulent during the last several years, and governments and enterprises are doing everything possible to inject momentum and effectuate sustainable growth. All member countries of Association of Southeast Asian Nations (ASEAN, aims to be ASEAN Economic Community (AEC by December 2015, have come to realize that an integrated ICT technology will enhance the competitiveness and creativity of their economies and fuel the sustainable growth of the global economy. The role that information and communication technologies (ICTs can play to support economic growth, especially on tourism, has never drawn so much attention and research. According to Networked Readiness Index (NRI, Thailand has made improvement in NRI, edging up from 77th to 74th place in 2013 and from 74th to 67th place to the latest measurement released by the World Economic Forum in2014 and ranked 3 out of 10 countries of ASEAN members. Although we still face serious challenges the impact of ICTs on tourism has become more far reaching as its transformational effects spread to several sectors of the economy and society via innovations. On this research we focus on only the hotels division in Southern of Thailand due to tourism’s economic on this area benefits very high income from oversea and ASEAN. We give an overview of the Hotel E-readiness Model that impact to tourism economic with computer networking infrastructures and communication technologies in Southern of Thailand. Our model is described on four majors - business environment, network readiness, network usage and network impacts. It aims to explore the problems and obstacles for improvement on computer networking infrastructure and

Spray cooling heat transfer: Technology overview and assessment of future challenges for micro-gravity application

International Nuclear Information System (INIS)

Silk, Eric A.; Golliher, Eric L.; Paneer Selvam, R.

2008-01-01

Advanced on-board flight systems for future NASA space exploration programs consist of components such as laser-diode arrays (LDA's) and multi-chip modules (MCM's). Thermal management of these systems require high heat flux cooling capability (≥100 W/cm 2 ), tight temperature control (approx. ±2 deg. C), reliable start-up (on demand) and long term stability. Traditional multiphase thermal control technologies for space flight (e.g., loop heat pipes, capillary pumped loops, etc.) satisfy the temperature control, start-up and stability requirements, but their heat flux removal capabilities are limited. Spray cooling can provide high heat fluxes in excess of 100 W/cm 2 using fluorinerts and over 1000 W/cm 2 with water while allowing tight temperature control at low coolant fluid flow rates. Spray cooling has been flight proven in an open loop configuration through the Space shuttle's flash evaporator system (FES). However, several closed system issues require investigation to further advance the technology to a technology readiness level (TRL) appropriate for closed system space flight application. This paper provides a discussion of the current status of spray cooling technology as well as NASA's goals, current direction, and challenges associated with the implementation and practice of this technology in the micro-gravity environment

Ready or Not...? Teen Sexuality and the Troubling Discourse of Readiness

Science.gov (United States)

Ashcraft, Catherine

2006-01-01

In this article, I explore how talk about being "ready" or "not ready" for sex shapes teen and adult understandings of sexuality. I argue that this "discourse of readiness" poses serious threats to teens' identity development, sexual decision making, and educators efforts to help them through these processes. To illustrate, I draw from my…

A maturity model to assess organisational readiness for change

OpenAIRE

Zephir, Olivier; Minel, Stéphanie; Chapotot, Emilie

2011-01-01

International audience; The presented model which is developed in a European project allows project management teams to assess the organisational maturity to integrate new practices under structural or technological change. Maturity for change is defined here as workforce capability to operate effectively in transformed processes. This methodology is addressed to tackle organisational readiness to fulfil business objectives through technological and structural improvements. The tool integrate...

The readiness of teachers to integrate information and communication technology for learning in a selected school in the GautengOnline project.

OpenAIRE

2008-01-01

This study is aimed at providing the reader with a detailed description of the readiness of teachers to integrate Information and Communication Technology (ICT) for learning in a selected school in the GautengOnline (GoL) Project, through qualitative research design that used various data collecting methods: Questionnaire, observations and interview. A large number of teachers showed some interest in using ICT learning but had difficulties on how to get started due to the lack of suitable ICT...

The antecedents of e-learning outcome: an examination of system quality, technology readiness, and learning behavior.

Science.gov (United States)

Ho, Li-An

2009-01-01

The rapid advancement of Internet and computer technology has not only influenced the way we live, but also the way we learn. Due to the implementation of e-learning in urban junior high schools in Taiwan, it has become essential to find out how external and internal factors affect junior high school students' online learning behavior, which consequently affects their learning outcome. The present study aims to propose a conceptual structural equation model to investigate the relationships among e-Learning system quality (eLSQ), technology readiness (TR), learning behavior (LB), and learning outcome (LO), and to demonstrate the direct and indirect effect of eLSQ and TR on LO from the perspectives of LB. Data collected from 10 urban junior high schools in Taiwan (N = 376) were analyzed using structural equation modeling. Results reveal that both eLSQ and TR have a direct and significant impact on LB. However, eLSQ and TR influence LO indirectly through LB. In addition, LB has a direct and positive significant influence on LO. Managerial implications are proposed and research limitations are discussed.

Technology development and applications at Fernald

International Nuclear Information System (INIS)

Pettit, P.J.; Skriba, M.C.; Warner, R.D.

1995-01-01

At the Fernald Environmental Management Project (FEMP) northwest of Cincinnati, Ohio, the U.S. Department of Energy and contractor Fernald Environmental Restoration Management Corporation (FERMCO) are aggressively pursuing both the development and the application of improved, innovative technology to the environmental restoration task. Application of emerging technologies is particularly challenging in a regulatory environment that places pressure on operational managers to develop and meet tight schedules. The regulatory and operational needs make close communication essential between technology developers and technology users (CERCLA/RCRA Unit managers). At Fernald this cooperation and communication has led, not only to the development and demonstration of new technologies with applications at other sites, but also to application of new technologies directly to the Fernald clean up. New technologies have been applied to improve environmental safety and health, improve the effectiveness of restoration efforts, and to cut restoration costs. The paper will describe successful efforts to develop and apply new technologies at the FEMP and will emphasize those technologies that have been applied and are planned for use in the clean up of this former uranium production facility

Research and new technologies in transportation. Vol. 1. High-speed railway systems: Maglev technology. Forschung und neue Technologien im Verkehr. Bd. 1. Schnellbahnsysteme: Magnetbandtechnolgie

Energy Technology Data Exchange (ETDEWEB)

1988-01-01

High-speed magnetic levitation technology opens up a new dimension for long-distance passenger transport with speeds ranging between ground travel and flying. The status of development and test results of the German TRANSRAPID magnetic levitation system and corresponding activities abroad will be reported on. Both the new vehicle technology of the TRANSRAPID 07 and results of application studies at home and abroad will be presented. High-speed magnetic railway technology - status and development perspectives; readiness for service, safety and reliability, application studies. The book comprises 11 papers read at the symposium on the subject of high-speed trains. 14 papers have been recorded separately in this database. (orig./HW).

2010 Manufacturing Readiness Assessment Update to the 2008 Report for Fuel Cell Stacks and Systems for the Backup Power and Materials Handling Equipment Markets

Energy Technology Data Exchange (ETDEWEB)

Wheeler, D.; Ulsh, M.

2012-08-01

In 2008, the National Renewable Energy Laboratory (NREL), under contract to the US Department of Energy (DOE), conducted a manufacturing readiness assessment (MRA) of fuel cell systems and fuel cell stacks for back-up power and material handling applications (MHE). To facilitate the MRA, manufacturing readiness levels (MRL) were defined that were based on the Technology Readiness Levels previously established by the US Department of Energy (DOE). NREL assessed the extensive existing hierarchy of MRLs developed by Department of Defense (DoD) and other Federal entities, and developed a MRL scale adapted to the needs of the Fuel Cell Technologies Program (FCTP) and to the status of the fuel cell industry. The MRL ranking of a fuel cell manufacturing facility increases as the manufacturing capability transitions from laboratory prototype development through Low Rate Initial Production to Full Rate Production. DOE can use MRLs to address the economic and institutional risks associated with a ramp-up in polymer electrolyte membrane (PEM) fuel cell production. In 2010, NREL updated this assessment, including additional manufacturers, an assessment of market developments since the original report, and a comparison of MRLs between 2008 and 2010.

A survey on the measure of combat readiness

Science.gov (United States)

Wen, Kwong Fook; Nor, Norazman Mohamad; Soon, Lee Lai

2014-09-01

Measuring the combat readiness in military forces involves the measures of tangible and intangible elements of combat power. Though these measures are applicable, the mathematical models and formulae used focus mainly on either the tangible or the intangible elements. In this paper, a review is done to highlight the research gap in the formulation of a mathematical model that incorporates tangible elements with intangible elements to measure the combat readiness of a military force. It highlights the missing link between the tangible and intangible elements of combat power. To bridge the gap and missing link, a mathematical model could be formulated that measures both the tangible and intangible aspects of combat readiness by establishing the relationship between the causal (tangible and intangible) elements and its effects on the measure of combat readiness. The model uses multiple regression analysis as well as mathematical modeling and simulation which digest the capability component reflecting its assets and resources, the morale component reflecting human needs, and the quality of life component reflecting soldiers' state of satisfaction in life. The results of the review provide a mean to bridge the research gap through the formulation of a mathematical model that shows the total measure of a military force's combat readiness. The results also significantly identify parameters for each of the variables and factors in the model.

Promoting Children's Learning through Technology Literacy: Challenges to School Librarians in the 21st Century

Science.gov (United States)

Ejikeme, Anthonia N.; Okpala, Helen N.

2017-01-01

In today's world of technological revolution, children need to be encouraged to be ready to acquire lifelong knowledge and skills in the 21st century. This paper presents an overview of the application of technologies in children's learning environment which apparently will give them the opportunity of making use of their thinking skills in order…

FUEL-FLEXIBLE GASIFICATION-COMBUSTION TECHNOLOGY FOR PRODUCTION OF H2 AND SEQUESTRATION-READY CO2

Energy Technology Data Exchange (ETDEWEB)

George Rizeq; Janice West; Arnaldo Frydman; Vladimir Zamansky; Linda Denton; Hana Loreth; Tomasz Wiltowski

2001-07-01

It is expected that in the 21st century the Nation will continue to rely on fossil fuels for electricity, transportation, and chemicals. It will be necessary to improve both the thermodynamic efficiency and environmental impact performance of fossil fuel utilization. General Electric Energy and Environmental Research Corporation (GE EER) has developed an innovative fuel-flexible Advanced Gasification-Combustion (AGC) concept to produce H{sub 2} and sequestration-ready CO{sub 2} from solid fuels. The AGC module offers potential for reduced cost and increased energy efficiency relative to conventional gasification and combustion systems. GE EER was awarded a Vision-21 program from U.S. DOE NETL to develop the AGC technology. Work on this three-year program started on October 1, 2000. The project team includes GE EER, California Energy Commission, Southern Illinois University at Carbondale, and T. R. Miles, Technical Consultants, Inc. In the AGC technology, coal/opportunity fuels and air are simultaneously converted into separate streams of (1) pure hydrogen that can be utilized in fuel cells, (2) sequestration-ready CO{sub 2}, and (3) high temperature/pressure oxygen-depleted air to produce electricity in a gas turbine. The process produces near-zero emissions and, based on preliminary modeling work in the first quarter of this program, has an estimated process efficiency of approximately 67% based on electrical and H{sub 2} energy outputs relative to the higher heating value of coal. The three-year R&D program will determine the operating conditions that maximize separation of CO{sub 2} and pollutants from the vent gas, while simultaneously maximizing coal conversion efficiency and hydrogen production. The program integrates lab-, bench- and pilot-scale studies to demonstrate the AGC concept. This is the third quarterly technical progress report for the Vision-21 AGC program supported by U.S. DOE NETL (Contract: DE-FC26-00FT40974). This report summarizes program

Pupils' Readiness for Self-Regulated Learning in the Forethought Phase of Exploratory Production

Science.gov (United States)

Metsärinne, Mika; Kallio, Manne; Virta, Kalle

2015-01-01

This article discusses pupils' readiness for self-regulation in Exploratory Production in Technology Education. In the forethought phase of Exploratory Production, pupils envision and regulate their technological production activities. Next, in the performance phase, the envisioned goals are tried and implemented through ideating, planning and…

Renewable energy technologies. Plant concepts, applications and practical hints; Regenerative Energietechnologien. Anlagenkonzepte, Anwendungen und Praxistipps

Energy Technology Data Exchange (ETDEWEB)

Theiss, Eric

2008-07-01

This textbook provides a comprehensive outline of renewable energy technologies, prototypes and innovations in technical facilities that are ready for the market. On the basis of current catalogues of technical rules, directives and guidelines, possible system configurations are outlined for each technology which are explained by means of examples, a system description, and a list of reference projects. There is also a glossary for the various technologies and a list of contact addresses. The textbook addresses architects, engineers, energy consultants, and students. (orig.)

Measuring readiness for sustainable transformation: an application of integral theory in the suburbs of Bangkok

NARCIS (Netherlands)

Panthasen, T.; Santisan, A.; Lambregts, B.

2012-01-01

This paper presents the results of a pilot study into the readiness of a local community to engage in an environmental transformation process. It uses elements of Sufficiency Economy and Integral Theory to explore to what extent a suburban Bangkok community is ready to adopt biological wastewater

The NOAA Local Climate Analysis Tool - An Application in Support of a Weather Ready Nation

Science.gov (United States)

Timofeyeva, M. M.; Horsfall, F. M.

2012-12-01

Citizens across the U.S., including decision makers from the local to the national level, have a multitude of questions about climate, such as the current state and how that state fits into the historical context, and more importantly, how climate will impact them, especially with regard to linkages to extreme weather events. Developing answers to these types of questions for locations has typically required extensive work to gather data, conduct analyses, and generate relevant explanations and graphics. Too frequently providers don't have ready access to or knowledge of reliable, trusted data sets, nor sound, scientifically accepted analysis techniques such that they can provide a rapid response to queries they receive. In order to support National Weather Service (NWS) local office forecasters with information they need to deliver timely responses to climate-related questions from their customers, we have developed the Local Climate Analysis Tool (LCAT). LCAT uses the principles of artificial intelligence to respond to queries, in particular, through use of machine technology that responds intelligently to input from users. A user translates customer questions into primary variables and issues and LCAT pulls the most relevant data and analysis techniques to provide information back to the user, who in turn responds to their customer. Most responses take on the order of 10 seconds, which includes providing statistics, graphical displays of information, translations for users, metadata, and a summary of the user request to LCAT. Applications in Phase I of LCAT, which is targeted for the NWS field offices, include Climate Change Impacts, Climate Variability Impacts, Drought Analysis and Impacts, Water Resources Applications, Attribution of Extreme Events, and analysis techniques such as time series analysis, trend analysis, compositing, and correlation and regression techniques. Data accessed by LCAT are homogenized historical COOP and Climate Prediction Center

Technologies and mechanisms for safety control of ready-to-eat muscle foods: an updated review.

Science.gov (United States)

Jiang, Jiang; Xiong, Youling L

2015-01-01

Ready-to-eat (RTE) muscle foods refer to a general category of meat and poultry products that are fully cooked and consumable without reheating. These products, including whole and sliced pork, beef, turkey, chicken, and variety of meats, in the forms of ham, roast, rolls, sausage, and frankfurter, are widely available in the delicatessen section of retail stores or various food service outlets. However, difficulties in avoidance of contamination by foodborne pathogens, notably Listeria monocytogenes, during product postlethality repackaging render RTE meats labile to outbreaks. Accordingly, the USDA-FSIS has established processing guidelines and regulations, which are constantly updated, to minimize foodborne pathogens in RTE products. Technologies that complement good manufacturing practice have been developed to control RTE meat safety. Among them, various antimicrobial product formulations, postpackaging pasteurization (thermal and nonthermal), and antimicrobial packaging are being used. Through these efforts, outbreaks linked to RTE meat consumption have substantially reduced in recent years. However, the pervasive and virulent nature of L. monocytogenes and the possible presence of other cold-tolerant pathogens entail continuing developments of new intervention technologies. This review updates existing and emerging physical and chemical methods and their mode of action to inactivate or inhibit threatening microorganisms in RTE muscle foods.

Overview of NASA Langley's Piezoelectric Ceramic Packaging Technology and Applications

Science.gov (United States)

Bryant, Robert G.

2007-01-01

Over the past decade, NASA Langley Research Center (LaRC) has developed several actuator packaging concepts designed to enhance the performance of commercial electroactive ceramics. NASA LaRC focused on properly designed actuator and sensor packaging for the following reasons, increased durability, protect the working material from the environment, allow for proper mechanical and electrical contact, afford "ready to use" mechanisms that are scalable, and develop fabrication methodology applicable to any active material of the same physical class. It is more cost effective to enhance or tailor the performance of existing systems, through innovative packaging, than to develop, test and manufacture new materials. This approach led to the development of several solid state actuators that include THUNDER, the Macrofiber Composite or (MFC) and the Radial Field Diaphragm or (RFD). All these actuators are fabricated using standard materials and processes derived from earlier concepts. NASA s fabrication and packaging technology as yielded, piezoelectric actuators and sensors that are easy to implement, reliable, consistent in properties, and of lower cost to manufacture in quantity, than their predecessors (as evidenced by their continued commercial availability.) These piezoelectric actuators have helped foster new research and development in areas involving computational modeling, actuator specific refinements, and engineering system redesign which led to new applications for piezo-based devices that replace traditional systems currently in use.

Readiness for the next generation of information competence in new product development

DEFF Research Database (Denmark)

Jespersen, Kristina Risom; Søndergaard, Helle Alsted

2007-01-01

Readiness for information methods like communities, simulation and virtual worlds in new product development (NPD) is discussed based on analysis of NPD strategy, market orientation and competitive pressure as generic antecedents of exploitative and explorative information search. The paper...... forwards evolvement as new information competence to leverage holistic information methods, and finds that current information competences of decision-makers are not ready to leverage new information methods enable by technology. Data is collected with an agent-based simulation platform and logistic...

Forward Technology Solar Cell Experiment (FTSCE) for MISSE-5 Verified and Readied for Flight on STS-114

Science.gov (United States)

Jenkins, Phillip P.; Krasowski, Michael J.; Greer, Lawrence C.; Flatico, Joseph M.

2005-01-01

The Forward Technology Solar Cell Experiment (FTSCE) is a space solar cell experiment built as part of the Fifth Materials on the International Space Station Experiment (MISSE-5): Data Acquisition and Control Hardware and Software. It represents a collaborative effort between the NASA Glenn Research Center, the Naval Research Laboratory, and the U.S. Naval Academy. The purpose of this experiment is to place current and future solar cell technologies on orbit where they will be characterized and validated. This is in response to recent on-orbit and ground test results that raised concerns about the in-space survivability of new solar cell technologies and about current ground test methodology. The various components of the FTSCE are assembled into a passive experiment container--a 2- by 2- by 4-in. folding metal container that will be attached by an astronaut to the outer structure of the International Space Station. Data collected by the FTSCE will be relayed to the ground through a transmitter assembled by the U.S. Naval Academy. Data-acquisition electronics and software were designed to be tolerant of the thermal and radiation effects expected on orbit. The experiment has been verified and readied for flight on STS-114.

Industrial applications of nuclear technology

International Nuclear Information System (INIS)

Vargas, Celso

2010-01-01

Industrial applications of nuclear technology have been very diverse worldwide. This type of technology has begun to introduce in Costa Rica to evaluate and improve different industrial processes. These applications have been classified into two or three categories, according to the criteria used. Nucleonic control systems, the gamma logging and radiotracers are determined. (author) [es

Femtosecond technology for science, industry and medicine

International Nuclear Information System (INIS)

Stingl, A.; Teraoka, Hiroshi

2000-01-01

Five years after introduction of the first ever prism less sub-20 Femtosecond oscillator, inventor of the chirped mirror technology are ranging from 10-fs-high power Oscillators with peak power levels up to MW regime, to ultra fast amplifier system in the GW regime, which became commercially available now. Advances in the optical and mechanical design yield highly compact and reliable laser systems ready to serve for scientific application as well as for real world application in diagnostics, medicine and micro-machining. (author)

Effects of self-service technology on customer value and customer readiness: The case of banking industry

Directory of Open Access Journals (Sweden)

Parviz Khadem

2013-07-01

Full Text Available The recent development on internet banking has contributed to this industry, significantly. People could do their banking transactions by clicking a bottom and transfer funds, pay bills, etc. In this paper, we present an empirical investigation to find out the effects of different factors on continuous internet banking. The proposed study of this paper has adopted a questionnaire, which was originally developed by Ho and Ko (2008 [Ho, S. H., & Ko, Y. Y. (2008. Effects of self-service technology on customer value and customer readiness: The case of Internet banking. Internet Research, 18(4, 427-446.]. We have used Pearson correlation test as well as stepwise regression techniques to verify the effect of different factors and the results of our survey show that four variables of easy implementation, usefulness, cost reduction and self-control positively influence continuous internet banking.

Advancement and application of bubble detector technology

International Nuclear Information System (INIS)

Buckner, M.A.; Casson, W.H.; Sims, C.S.

1991-01-01

A new technology is vying for position in the dosimetry community. This relatively young technology is building upon the foundation of the bubble chamber, conceptualized by Glaser in 1952. Although the attitudes surrounding this technology are somewhat mixed, applications of this technology hold great promise for the future of neutron dosimetry. The Dosimetry Applications Research facility of Oak Ridge National Laboratory is looking into some innovative applications of this technology. The authors are investigating options for overcoming its limiting features in hopes of achieving an unprecedented level of proficiency in neutron detection. Among these are the developing and testing of a Combination Area Neutron Spectrometer, CANS, assessing the plausibility of extremity applications, the assembly of an alternative reader for research, investigation of temperature-related effects and how to correct for them and considerations on the coming of age of neutron dosimetry via real time detection of bubble formation in Bubble Technology Industries Inc. detectors. The authors attempt to answer the questions: (1) What areas hold the greatest promise for application of this emerging technology?; (2) What obstacles must be overcome before full-blown application becomes a reality?; and (3) What might the future hold?

Internet Shop Users: Computer Practices and Its Relationship to E-Learning Readiness

OpenAIRE

Jasper Vincent Q. Alontaga

2018-01-01

Access to computer technology is essential in developing 21st century skills. One venue that serves to bridge the gap in terms of access is internet shops (also known cybercafés or internet cafés). As such, it is important to examine the type of activities internet shop users engage in and how they develop and relate to their e-learning readiness. This study examined the profile, computer practices and e-learning readiness of seventy one (71) internet shop users. A researcher-made internet sh...

Readiness factors for lean implementation in healthcare settings--a literature review.

Science.gov (United States)

Al-Balushi, S; Sohal, A S; Singh, P J; Al Hajri, A; Al Farsi, Y M; Al Abri, R

2014-01-01

The purpose of this paper is to determine the readiness factors that are critical to the application and success of lean operating principles in healthcare organizations through a review of relevant literature. A comprehensive review of literature focussing on lean and lean healthcare was conducted. Leadership, organizational culture, communication, training, measurement, and reward systems are all commonly attributed readiness factors throughout general change management and lean literature. However, directly related to the successful implementation of lean in healthcare is that a setting is able to authorize a decentralized management style and undertake an end-to-end process view. These can be particularly difficult initiatives for complex organizations such as healthcare settings. The readiness factors identified are based on a review of the published literature. The external validity of the findings could be enhanced if tested using an empirical study. The readiness factors identified will enable healthcare practitioners to be better prepared as they begin their lean journeys. Sustainability of the lean initiative will be at stake if these readiness factors are not addressed. To the best of the knowledge, this is the first paper that provides a consolidated list of key lean readiness factors that can guide practice, as well as future theory and empirical research.

Vacuum science, technology, and applications

CERN Document Server

Naik, Pramod K

2018-01-01

Vacuum plays an important role in science and technology. The study of interaction of charged particles, neutrals and radiation with each other and with solid surfaces requires a vacuum environment for reliable investigations. Vacuum has contributed immensely to advancements made in nuclear science, space, metallurgy, electrical/electronic technology, chemical engineering, transportation, robotics and many other fields. This book is intended to assist students, scientists, technicians and engineers to understand the basics of vacuum science and technology for application in their projects. The fundamental theories, concepts, devices, applications, and key inventions are discussed.

Implementation of the TsunamiReady Supporter Program in Puerto Rico

Science.gov (United States)

Flores Hots, V. E.; Vanacore, E. A.; Gonzalez Ruiz, W.; Gomez, G.

2016-12-01

The Puerto Rico Seismic Network (PRSN) manages the PR Tsunami Program (NTHMP), including the TsunamiReady Supporter Program. Through this program the PRSN helps private organizations, businesses, facilities or local government entities to willingly engage in tsunami planning and preparedness that meet some requirements established by the National Weather Service. TsunamiReady Supporter organizations are better prepared to respond to a tsunami emergency, developing a response plan (using a template that PRSN developed and provides), and reinforcing their communication systems including NOAA radio, RSS, and loud speakers to receive and disseminate the alerts issued by the NWS and the Tsunami Warning Centers (TWC). The planning and the communication systems added to the training that PRSN provides to the staff and employees, are intend to help visitors and employees evacuate the tsunami hazard zone to the nearest assembly point minimizing loss of life. Potential TsunamiReady Supporters include, but are not limited to, businesses, schools, churches, hospitals, malls, utilities, museums, beaches, and harbors. However, the traditional targets for such programs are primarily tourism sites and hotels where people unaware of the tsunami hazard may be present. In 2016 the Tsunami Ready Program guided four businesses to achieve the TsunamiReady Supporter recognition. Two facilities were hotels near or inside the evacuation zone. The other facilities were the first and only health center and supermarket to be recognized in the United States and US territories. Based on the experience of preparing the health center and supermarket sites, here we present two case studies of how the TsunamiReady Supporter Program can be applied to non-traditional facilities as well as how the application of this program to such facilities can improve tsunami hazard mitigation. Currently, we are working on expanding the application of this program to non-traditional facilities by working with a

NASA Technology Applications Team: Commercial applications of aerospace technology

Science.gov (United States)

1994-01-01

The Research Triangle Institute (RTI) Team has maintained its focus on helping NASA establish partnerships with U.S. industry for dual use development and technology commercialization. Our emphasis has been on outcomes, such as licenses, industry partnerships and commercialization of technologies, that are important to NASA in its mission of contributing to the improved competitive position of U.S. industry. The RTI Team has been successful in the development of NASA/industry partnerships and commercialization of NASA technologies. RTI ongoing commitment to quality and customer responsiveness has driven our staff to continuously improve our technology transfer methodologies to meet NASA's requirements. For example, RTI has emphasized the following areas: (1) Methodology For Technology Assessment and Marketing: RTI has developed and implemented effective processes for assessing the commercial potential of NASA technologies. These processes resulted from an RTI study of best practices, hands-on experience, and extensive interaction with the NASA Field Centers to adapt to their specific needs. (2) Effective Marketing Strategies: RTI surveyed industry technology managers to determine effective marketing tools and strategies. The Technology Opportunity Announcement format and content were developed as a result of this industry input. For technologies with a dynamic visual impact, RTI has developed a stand-alone demonstration diskette that was successful in developing industry interest in licensing the technology. And (3) Responsiveness to NASA Requirements: RTI listened to our customer (NASA) and designed our processes to conform with the internal procedures and resources at each NASA Field Center and the direction provided by NASA's Agenda for Change. This report covers the activities of the Research Triangle Institute Technology Applications Team for the period 1 October 1993 through 31 December 1994.

Ultraviolet laser technology and applications

CERN Document Server

Elliott, David L

1995-01-01

Ultraviolet Laser Technology and Applications is a hands-on reference text that identifies the main areas of UV laser technology; describes how each is applied; offers clearly illustrated examples of UV opticalsystems applications; and includes technical data on optics, lasers, materials, and systems. This book is unique for its comprehensive, in-depth coverage. Each chapter deals with a different aspect of the subject, beginning with UV light itself; moving through the optics, sources, and systems; and concluding with detailed descriptions of applications in various fields.The text enables pr

Readiness evaluation report for operation of the 200-ZP-1 pump-and-treat system

International Nuclear Information System (INIS)

Lehrschall, R. R.

1996-07-01

The 200-ZP-1 Readiness Evaluation Team has completed a readiness evaluation (RE) of the 200-ZP-1 Interim Remedial Measure. During the RE process, other Environmental Restoration Contractor and Hanford Site project activities were assessed (i.e., using lessons learned reviews) for applicability to the 200-ZP-1 RE. Nine additional areas were discovered to be applicable to the 200-ZP-1 IRM and were incorporated into the RE process as functional readiness requirements. The goal of the 200-ZP-1 Operable Unit IRM is to reduce further migration of the carbon tetrachloride, chloroform, and trichloroethylene in the groundwater of the 200 West Area. The IRM treatment system has been designed to initiate hydraulic containment of the contaminant mass in the high-concentration portion of the CCl 4 plume

Smart Technology Applications in Business Environments

NARCIS (Netherlands)

Issa, Tomayess; Kommers, Petrus A.M.; Issa, Theodora; Isaías, Pedro; Issa, Touma B.

2017-01-01

Technology continues to make great strides in society by providing opportunities for advancement, inclusion, and global competency. As new systems and tools arise, novel applications are created as well. Smart Technology Applications in Business Environments is an essential reference source for the

The concept of readiness to change.

Science.gov (United States)

Dalton, Cindy C; Gottlieb, Laurie N

2003-04-01

Readiness is associated with change, yet there is little understanding of this construct. The purpose of this study was to examine readiness; its referents, associated factors and the resulting consequences. In the course of nursing five clients living with multiple sclerosis over a 7-month period using a Reflective Practice Model, data were systematically gathered using open-ended and then more focused questioning. Data collected during 42 client encounters (28 face-to-face encounters; 14 telephone contacts) were analysed using Chinn and Kramer's concept analysis technique. Findings. The concept of readiness was inductively derived. Readiness is both a state and a process. Before clients can create change they need to become ready to change. A number of factors trigger readiness. These include when: (a) clients perceive that a health concern is not going to resolve, (b) a change in a client's physical condition takes on new significance, (c) clients feel better able to manage their stress, (d) clients have sufficient energy, (e) clients perceive that they have adequate support in undertaking change. When one or more of these factors is present clients become ready to consider change. The process of readiness involves recognizing the need to change, weighing the costs and benefits and, when benefits outweigh costs, planning for change. The desire to change and to take action determines clients' degree of readiness. When they experience a high degree of readiness they report less anger, less depression, and view their condition in a more positive light. In contrast, when they experience a low degree of readiness they report feeling depressed, afraid and vulnerable in the face of change. Nursing has an important role to play in creating conditions to support change. To fulfil this role, nurses need to be able to assess readiness for change and the factors that enable it and then to intervene in ways that facilitate readiness.

Bioprinting technology and its applications.

Science.gov (United States)

Seol, Young-Joon; Kang, Hyun-Wook; Lee, Sang Jin; Atala, Anthony; Yoo, James J

2014-09-01

Bioprinting technology has emerged as a powerful tool for building tissue and organ structures in the field of tissue engineering. This technology allows precise placement of cells, biomaterials and biomolecules in spatially predefined locations within confined three-dimensional (3D) structures. Various bioprinting technologies have been developed and utilized for applications in life sciences, ranging from studying cellular mechanisms to constructing tissues and organs for implantation, including heart valve, myocardial tissue, trachea and blood vessels. In this article, we introduce the general principles and limitations of the most widely used bioprinting technologies, including jetting- and extrusion-based systems. Application-based research focused on tissue regeneration is presented, as well as the current challenges that hamper clinical utility of bioprinting technology. © The Author 2014. Published by Oxford University Press on behalf of the European Association for Cardio-Thoracic Surgery. All rights reserved.

Technology transfer from nuclear research

International Nuclear Information System (INIS)

1989-01-01

A number of processes, components and instruments developed at the Bhabha Atomic Research Centre, (BARC), Bombay, find application in industry and are available for transfer to private or public sector undertakings for commercial exploitation. The Technology Transfer Group (TTG) constituted in January 1980 identifies such processes and prototypes which can be made available for transfer. This catalogue contains brief descriptions of such technologies and they are arranged under three groups, namely, Group A containing descriptions of technologies already transferred, Group B containing descriptions of technologies ready for transfer and Group C containing descriptions of technology transfer proposals being processed. The position in the above-mentioned groups is as on 1 March 1989. The BARC has also set up a Technology Corner where laboratory models and prototypes of instruments, equipment and components are displayed. These are described in the second part of the catalogue. (M.G.B.)

Consumers and Makers: Exploring Opposing Paradigms of Millennial College Readiness

Science.gov (United States)

Jackson, Matthew

2017-01-01

The political and technological circumstances of the past two decades have culminated in opposing epistemic paradigms of college readiness, where millennial students' conceptual understanding of "learning" is both narrowed to meet the demands of school systems bound to accountability and amplified by a rapidly evolving digital world. The…

Silicon on insulator technology. Characteristics. Applications; Technologies silicium sur isolant. Caracteristiques. Exemples d'application

Energy Technology Data Exchange (ETDEWEB)

Suat, J. P.; Peccoud, L.; Le Goascoz, V.; Garcia, M.; Mackowiak, E.

1975-01-31

The advantages resulting from a SOS (Silicon-on-Sapphire) MOS technology are demonstrated. Experimental results giving the performance of C.MOS and depletion-enrichment P-channel technologies are presented, with an application of Silicon on insulator on development, that is to say a 1024 bits MNOS memory, peripheral circuits being developed according to the depletion-enrichment technology.

Determining registered nurses' readiness for evidence-based practice.

Science.gov (United States)

Thiel, Linda; Ghosh, Yashowanto

2008-01-01

As health care systems worldwide move toward instituting evidence-based practice (EBP), its implementation can be challenging. Conducting a baseline assessment to determine nurses' readiness for EBP presents opportunities to plan strategies before implementation. Although a growing body of research literature is focused on implementing EBP, little attention has been paid to assessing nurses' readiness for EBP. The purpose of this study was to assess registered nurses' readiness for EBP in a moderate-sized acute care hospital in the Midwestern United States before implementation of a hospital-wide nursing EBP initiative. A descriptive cross-sectional survey design was used; 121 registered nurses completed the survey. The participants (n= 121) completed the 64-item Nurses' Readiness for Evidence-Based Practice Survey that allowed measurement of information needs, knowledge and skills, culture, and attitudes. Data were analyzed using descriptive statistics and a post hoc analysis. The majority (72.5%) of respondents indicated that when they needed information, they consulted colleagues and peers rather than using journals and books; 24% of nurses surveyed used the health database, Cumulative Index to Nursing & Allied Health Literature (CINAHL). The respondents perceived their EBP knowledge level as moderate. Cultural EBP scores were moderate, with unit scores being higher than organizational scores. The nurses' attitudes toward EBP were positive. The post hoc analysis showed many significant correlations. Nurses have access to technological resources and perceive that they have the ability to engage in basic information gathering but not in higher level evidence gathering. The elements important to EBP such as a workplace culture and positive attitudes are present and can be built upon. A "site-specific" baseline assessment provides direction in planning EBP initiatives. The Nurses' Readiness for EBP Survey is a streamlined tool with established reliability and

Wireless Technology Application to Nuclear Power Plants

International Nuclear Information System (INIS)

Lee, Jeong Kweon; Jeong, See Chae; Jeong, Ki Hoon; Oh, Do Young; Kim, Jae Hack

2009-01-01

Wireless technologies are getting widely used in various industrial processes for equipment condition monitoring, process measurement and other applications. In case of Nuclear Power Plant (NPP), it is required to review applicability of the wireless technologies for maintaining plant reliability, preventing equipment failure, and reducing operation and maintenance costs. Remote sensors, mobile technology and two-way radio communication may satisfy these needs. The application of the state of the art wireless technologies in NPPs has been restricted because of the vulnerability for the Electromagnetic Interference and Radio Frequency Interference (EMI/RFI) and cyber security. It is expected that the wireless technologies can be applied to the nuclear industry after resolving these issues which most of the developers and vendors are aware of. This paper presents an overview and information on general wireless deployment in nuclear facilities for future application. It also introduces typical wireless plant monitoring system application in the existing NPPs

Cost, Time, and Risk Assessment of Different Wave Energy Converter Technology Development Trajectories: Preprint

Energy Technology Data Exchange (ETDEWEB)

Weber, Jochem W [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Laird, Daniel [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Costello, Ronan [Wave Venture; Roberts, Jesse [Sandia National Laboratories; Bull, Diana [Sandia National Laboratories; Babarit, Aurelien [Ecole Centrale de Nantes; Nielsen, Kim [Ramboll; Ferreira, Claudio Bittencourt [DNV-GL; Kennedy, Ben [Wave Venture

2017-09-14

This paper presents a comparative assessment of three fundamentally different wave energy converter technology development trajectories. The three technology development trajectories are expressed and visualised as a function of technology readiness levels and technology performance levels. The assessment shows that development trajectories that initially prioritize technology readiness over technology performance are likely to require twice the development time, consume a threefold of the development cost, and are prone to a risk of technical or commercial failure of one order of magnitude higher than those development trajectories that initially prioritize technology performance over technology readiness.

Factors preceding CRM readiness in small- and medium-sized tourism enterprises

Directory of Open Access Journals (Sweden)

Dinesh Vallabh

2015-07-01

Full Text Available Orientation: Customer relationship management (CRM is important to organisations striving for competitive advantage through building relationships with their customers. Research purpose: This study identified the factors preceding CRM and assessed selected South African small- and medium-sized tourism enterprises’ (SMTEs readiness for CRM. Motivation: CRM is likely to enhance SMTEs’ competitiveness. However, successful adoption and implementation of CRM is unlikely unless the organisation is ready for it. Research design, approach and method: A quantitative research approach and survey questionnaire yielded primary data from 332 respondent organisations selected by systematic sampling. Exploratory factor analysis was used to identify the latent factors preceding CRM readiness. Organisational CRM readiness was assessed based on CRM maturity in terms of data collection, use and sharing throughout the organisation. Main findings: Respondent-organisations performed well on the four factors preceding CRM readiness − business strategy, customer strategy, touch points and competencies, skills and technology and also on data collections and use, but not on data sharing. Practical/Managerial implications: CRM practice is believed to assist organisations in tailoring products and services to customers’ needs, providing customer satisfaction, enhancing customer retention and ultimately improving the organisation’s competitiveness and profitability. CRM might fail if SMTEs do not have CRM-enabling conditions in place and a CRM readiness audit should therefore be performed. Contribution: The study contributes to a largely under-researched area concerning CRM in SMTEs by providing an improved understanding of the factors that will enable SMTEs to engage in CRM activities.

Earned Value Management Considering Technical Readiness Level and Its Application to New Space Launcher Program

Science.gov (United States)

Choi, Young-In; Ahn, Jaemyung

2018-04-01

Earned value management (EVM) is a methodology for monitoring and controlling the performance of a project based on a comparison between planned and actual cost/schedule. This study proposes a concept of hybrid earned value management (H-EVM) that integrates the traditional EVM metrics with information on the technology readiness level. The proposed concept can reflect the progress of a project in a sensitive way and provides short-term perspective complementary to the traditional EVM metrics. A two-dimensional visualization on the cost/schedule status of a project reflecting both of the traditional EVM (long-term perspective) and the proposed H-EVM (short-term perspective) indices is introduced. A case study on the management of a new space launch vehicle development program is conducted to demonstrate the effectiveness of the proposed H-EVM concept, associated metrics, and the visualization technique.

Career Readiness: Has Its Time Finally Come?

Science.gov (United States)

DeWitt, Stephen

2012-01-01

In 2010, the Association for Career and Technical Education (ACTE) released a "What Is Career Ready?" definition. As the career-readiness definition explains, there is much overlap between "college readiness" and "career readiness," but academic preparedness for college alone is not enough to be truly career-ready.…

An Exploratory Analysis of Readiness for Environmental Education.

Science.gov (United States)

Harmon, N. Paul; And Others

Contained in this monograph is a review and synthesis of developmental psychology and learning theory, with major emphasis upon applications of the developmental perspective to environmental education curriculum and instruction. Based upon a summary of the work of Piaget and his followers, a learning readiness axis is proposed. Also examined are…

Overview of monitoring applications for retrofit and new-build NPP projects

Energy Technology Data Exchange (ETDEWEB)

Thomas, V.; Black, C., E-mail: thomasvm@westinghouse.com, E-mail: blackcj@westinghouse.com [Westinghouse Electric Company, LLC, New Stanton, PA (United States)

2015-07-01

Westinghouse has provided digital I&C upgrade systems to the fleet of nuclear power plants worldwide from the earliest introduction of such technology to power generation, covering a complete range of applications including systems for protection, control, information, & monitoring. In this context, plant computer and vibration/diagnostic systems have been integral to existing plant retrofits as well as new-build (e.g. AP1000 plants). Westinghouse has positioned a set of integrated technologies to facilitate increased efficiency and effectiveness of system engineers relative to maintaining a high level of equipment readiness and reliability by leveraging I&C technology. This presentation provides an overview survey of such technologies and product applications. (author)

New advance in the research of post-remote sensing application technology. Series of 'proposition and consideration of post-remote sensing application technology'

International Nuclear Information System (INIS)

Liu Dechang; Ye Fawang

2005-01-01

Based on deep consideration in post-remote sensing application technology, this article pays more attention to its technological meaning. The application idea of post-remote sensing application technology to uranium exploration is also discussed. The proposition and research on new concept of post-remote sensing application technology is an important search and of important theoretical and practical significance to uranium exploration. (authors)

Nano technologies, technologies converging and potential biomedical applications

International Nuclear Information System (INIS)

Capuano, V.

2005-01-01

The applications of nano technology to biology and medicine appear really promising for diagnostics, for various therapeutic approaches and in medical instrumentations. The growing synergism among nano technology, biotechnology, information technology and cognitive sciences, their convergence (NBIC) from the nano scale, could involve on next decades great changes in medicine, from a reactive to a predictive and preventive approach. It is expected that NBIC converging technologies could achieve tremendous improvements in human abilities and enhance societal achievement of related social and ethical implications, in the framework of a constant dialogue between science and society [it

Nuclear Technology applications

International Nuclear Information System (INIS)

Cibils Machado, W. E- mail: wrcibils@adinet.com.uy

2002-01-01

The present work tries on the applications of the nuclear technology in the life daily, such as agriculture and feeding, human health, industry, non destructive essays, isotopic hydrology, and the nuclear power stations for electricity production and radioisotopes production

Radiation technology in emerging industrial applications. Proceedings

International Nuclear Information System (INIS)

2003-01-01

In many industrial applications radiation processing has proven to be a technology of choice either because of its economic competitiveness or its technical superiority. Although the chemical effects of ionizing radiation have been known for more than a century, its industrial applications became possible only after the availability of reliable gamma sources and powerful electron accelerators during the last couple of decades.The programmes of the International Atomic Energy Agency (IAEA) in radiation processing are implemented through the Department of Nuclear Sciences and Applications and the Department of Technical Co-operation. The IAEA has been active in this field for many years, contributing to new developments, training, promotion and transfer of technology. In September 1997, the IAEA held an international symposium in Zakopane, Poland on the 'Use of radiation technology for the conservation of environment' where the status of current developments and of applications of radiation processing in the control of environmental pollution was reviewed (IAEA-TECDOC-1023, 1998). Recent developments and achievements in various aspects of radiation processing have been assessed continuously through the organization of consultants meetings, advisory group meetings and research co-ordination meetings. Worldwide growing interest in the use of radiation technology in various new industrial applications, as exemplified by the reports and presentations made at these meetings, has led the IAEA to organize a symposium to cover every aspect of radiation processing and, exclusively, the emerging industrial applications of radiation technology. The International Symposium on Radiation Technology in Emerging Industrial Applications was convened in November 2000 in Beijing, China. Its main purpose was to bring scientists,technologists, industrialists and regulatory authorities together with a view of exchanging information and reviewing the status of current developments and

Radiation technology in emerging industrial applications. Proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-09-01

In many industrial applications radiation processing has proven to be a technology of choice either because of its economic competitiveness or its technical superiority. Although the chemical effects of ionizing radiation have been known for more than a century, its industrial applications became possible only after the availability of reliable gamma sources and powerful electron accelerators during the last couple of decades.The programmes of the International Atomic Energy Agency (IAEA) in radiation processing are implemented through the Department of Nuclear Sciences and Applications and the Department of Technical Co-operation. The IAEA has been active in this field for many years, contributing to new developments, training, promotion and transfer of technology. In September 1997, the IAEA held an international symposium in Zakopane, Poland on the 'Use of radiation technology for the conservation of environment' where the status of current developments and of applications of radiation processing in the control of environmental pollution was reviewed (IAEA-TECDOC-1023, 1998). Recent developments and achievements in various aspects of radiation processing have been assessed continuously through the organization of consultants meetings, advisory group meetings and research co-ordination meetings. Worldwide growing interest in the use of radiation technology in various new industrial applications, as exemplified by the reports and presentations made at these meetings, has led the IAEA to organize a symposium to cover every aspect of radiation processing and, exclusively, the emerging industrial applications of radiation technology. The International Symposium on Radiation Technology in Emerging Industrial Applications was convened in November 2000 in Beijing, China. Its main purpose was to bring scientists,technologists, industrialists and regulatory authorities together with a view of exchanging information and reviewing the status of current developments and

Development of Food Preservation and Processing Technologies by Radiation Technology

International Nuclear Information System (INIS)

Byun, Myung Woo; Lee, Ju Won; Kim, Jae Hun

2007-07-01

To secure national food resources, development of energy-saving food processing and preservation technologies, establishment of method on improvement of national health and safety by development of alternative techniques of chemicals and foundation of the production of hygienic food and public health related products by irradiation technology were studied. Results at current stage are following: As the first cooperative venture business technically invested by National Atomic Research Development Project, institute/company's [technology-invested technology foundation No. 1] cooperative venture, Sun-BioTech Ltd., was founded and stated its business. This suggested new model for commercialization and industrialization of the research product by nation-found institute. From the notice of newly approved product list about irradiated food, radiation health related legal approval on 7 food items was achieved from the Ministry of health and wellfare, the Korea Food and Drug Administration, and this contributed the foundation of enlargement of practical use of irradiated food. As one of the foundation project for activation of radiation application technology for the sanitation and secure preservation of special food, such as military meal service, food service for patient, and food for sports, and instant food, such as ready-to-eat/ready-to-cook food, the proposal for radiation application to the major military commander at the Ministry of National Defence and the Joint Chiefs of Staff was accepted for the direction of military supply development in mid-termed plan for the development of war supply. Especially, through the preliminary research and the development of foundation technology for the development of the Korean style space food and functional space food, space Kimch with very long shelf life was finally developed. The development of new item/products for food and life science by combining RT/BT, the development of technology for the elimination/reduction of

Development of Food Preservation and Processing Technologies by Radiation Technology

Energy Technology Data Exchange (ETDEWEB)

Byun, Myung Woo; Lee, Ju Won; Kim, Jae Hun [and others

2007-07-15

To secure national food resources, development of energy-saving food processing and preservation technologies, establishment of method on improvement of national health and safety by development of alternative techniques of chemicals and foundation of the production of hygienic food and public health related products by irradiation technology were studied. Results at current stage are following: As the first cooperative venture business technically invested by National Atomic Research Development Project, institute/company's [technology-invested technology foundation No. 1] cooperative venture, Sun-BioTech Ltd., was founded and stated its business. This suggested new model for commercialization and industrialization of the research product by nation-found institute. From the notice of newly approved product list about irradiated food, radiation health related legal approval on 7 food items was achieved from the Ministry of health and wellfare, the Korea Food and Drug Administration, and this contributed the foundation of enlargement of practical use of irradiated food. As one of the foundation project for activation of radiation application technology for the sanitation and secure preservation of special food, such as military meal service, food service for patient, and food for sports, and instant food, such as ready-to-eat/ready-to-cook food, the proposal for radiation application to the major military commander at the Ministry of National Defence and the Joint Chiefs of Staff was accepted for the direction of military supply development in mid-termed plan for the development of war supply. Especially, through the preliminary research and the development of foundation technology for the development of the Korean style space food and functional space food, space Kimch with very long shelf life was finally developed. The development of new item/products for food and life science by combining RT/BT, the development of technology for the elimination/reduction of

Development of Food Preservation and Processing Technologies by Radiation Technology

Energy Technology Data Exchange (ETDEWEB)

Byun, Myung Woo; Lee, Ju Won; Kim, Jae Hun (and others)

2007-07-15

To secure national food resources, development of energy-saving food processing and preservation technologies, establishment of method on improvement of national health and safety by development of alternative techniques of chemicals and foundation of the production of hygienic food and public health related products by irradiation technology were studied. Results at current stage are following: As the first cooperative venture business technically invested by National Atomic Research Development Project, institute/company's [technology-invested technology foundation No. 1] cooperative venture, Sun-BioTech Ltd., was founded and stated its business. This suggested new model for commercialization and industrialization of the research product by nation-found institute. From the notice of newly approved product list about irradiated food, radiation health related legal approval on 7 food items was achieved from the Ministry of health and wellfare, the Korea Food and Drug Administration, and this contributed the foundation of enlargement of practical use of irradiated food. As one of the foundation project for activation of radiation application technology for the sanitation and secure preservation of special food, such as military meal service, food service for patient, and food for sports, and instant food, such as ready-to-eat/ready-to-cook food, the proposal for radiation application to the major military commander at the Ministry of National Defence and the Joint Chiefs of Staff was accepted for the direction of military supply development in mid-termed plan for the development of war supply. Especially, through the preliminary research and the development of foundation technology for the development of the Korean style space food and functional space food, space Kimch with very long shelf life was finally developed. The development of new item/products for food and life science by combining RT/BT, the development of technology for the elimination/reduction of

Application of Java technology in radiation image processing

International Nuclear Information System (INIS)

Cheng Weifeng; Li Zheng; Chen Zhiqiang; Zhang Li; Gao Wenhuan

2002-01-01

The acquisition and processing of radiation image plays an important role in modern application of civil nuclear technology. The author analyzes the rationale of Java image processing technology which includes Java AWT, Java 2D and JAI. In order to demonstrate applicability of Java technology in field of image processing, examples of application of JAI technology in processing of radiation images of large container have been given

A case history of technology transfer

Science.gov (United States)

1981-01-01

A sequence of events, occurring over the last 25 years, are described that chronicle the evolution of ion-bombardment electric propulsion technology. Emphasis is placed on the latter phases of this evolution, where special efforts were made to pave the way toward the use of this technology in operational space flight systems. These efforts consisted of a planned program to focus the technology toward its end applications and an organized process that was followed to transfer the technology from the research-technology NASA Center to the user-development NASA Center and its industry team. Major milestones in this evolution, which are described, include the development of thruster technology across a large size range, the successful completion of two space electric rocket tests, SERT I and SERT II, development of power-processing technology for electric propulsion, completion of a program to make the technology ready for flight system development, and finally the technology transfer events.

Military Readiness: DODs Readiness Rebuilding Efforts May Be at Risk without a Comprehensive Plan

Science.gov (United States)

2016-09-01

specific elements that are to be in strategic plans. 8Chairman of the Joint Chiefs of Staff Guide 3401D, CJCS Guide to the Chairman’s Readiness ...all its major functions and operations. DOD strategic guidance makes it clear that rebuilding readiness is a priority that supports the... readiness recovery efforts. Evaluations of the plan to monitor goals and objectives Assessments, through objective measurement and systematic

Remote technology applications in spent fuel management

International Nuclear Information System (INIS)

2005-03-01

Spent fuel management has become a prospective area for application of remote technology in recent years with a steadily growing inventory of spent fuel arising from nuclear power production. A remark that could be made from the review of technical information collected from the IAEA meetings was that remote technology in spent fuel management has matured well through the past decades of industrial experiences. Various remote technologies have been developed and applied in the past for facility operation and maintenance work in spent fuel examination, storage, transportation, reprocessing and radioactive waste treatment, among others, with significant accomplishments in dose reduction to workers, enhancement of reliability, etc. While some developmental activities are continuing for more advanced applications, industrial practices have made use of simple and robust designs for most of the remote systems technology applications to spent fuel management. In the current state of affairs, equipment and services in remote technology are available in the market for applications to most of the projects in spent fuel management. It can be concluded that the issue of critical importance in remote systems engineering is to make an optimal selection of technology and equipment that would best satisfy the as low as reasonably achievable (ALARA) requirements in terms of relevant criteria like dose reduction, reliability, costs, etc. In fact, good selection methodology is the key to efficient implementation of remote systems applications in the modern globalized market. This TECDOC gives a review of the current status of remote technology applications for spent fuel management, based on country reports from some Member States presented at the consultancy meetings, of which updated reports are attached in the annex. The scope of the review covers the series of spent fuel handling operations involved in spent fuel management, from discharge from reactor to reprocessing or

Biotechnology's Regulatory Science: The Case of Roundup Ready Soybean's Patent Expiration

NARCIS (Netherlands)

Puente Rodriguez, D.; Swart, J.A.A.

2014-01-01

The patent held by Monsanto for Roundup Ready® soybeans will expire soon and, therefore, the first generic agro-food product in the short history of agro-biotechnology will become a fact. Using insights from science and technology studies, the article elaborates on the importance of regulatory

Application Technology Research Unit

Data.gov (United States)

Federal Laboratory Consortium — To conduct fundamental and developmental research on new and improved application technologies to protect floricultural, nursery, landscape, turf, horticultural, and...

Psychometric evaluation of the Work Readiness Questionnaire in schizophrenia.

Science.gov (United States)

Potkin, Steven G; Bugarski-Kirola, Dragana; Edgar, Chris J; Soliman, Sherif; Le Scouiller, Stephanie; Kunovac, Jelena; Miguel Velasco, Eugenio; Garibaldi, George M

2016-04-01

Unemployment can negatively impact quality of life among patients with schizophrenia. Employment status depends on ability, opportunity, education, and cultural influences. A clinician-rated scale of work readiness, independent of current work status, can be a valuable assessment tool. A series of studies were conducted to create and validate a Work Readiness Questionnaire (WoRQ) for clinicians to assess patient ability to engage in socially useful activity, independent of work availability. Content validity, test-retest and inter-rater reliability, and construct validity were evaluated in three separate studies. Content validity was supported. Cronbach's α was 0.91, in the excellent range. Clinicians endorsed WoRQ concepts, including treatment adherence, physical appearance, social competence, and symptom control. The final readiness decision showed good test-retest reliability and moderate inter-rater reliability. Work readiness was associated with higher function and lower levels of negative symptoms. Low positive and high negative predictive values confirmed the concept validity. The WoRQ has suitable psychometric properties for use in a clinical trial for patients with a broad range of symptom severity. The scale may be applicable to assess therapeutic interventions. It is not intended to assess eligibility for supported work interventions. The WoRQ is suitable for use in schizophrenia clinical trials to assess patient work functional potential.

System Verification Through Reliability, Availability, Maintainability (RAM) Analysis & Technology Readiness Levels (TRLs)

Energy Technology Data Exchange (ETDEWEB)

Emmanuel Ohene Opare, Jr.; Charles V. Park

2011-06-01

The Next Generation Nuclear Plant (NGNP) Project, managed by the Idaho National Laboratory (INL), is authored by the Energy Policy Act of 2005, to research, develop, design, construct, and operate a prototype fourth generation nuclear reactor to meet the needs of the 21st Century. A section in this document proposes that the NGNP will provide heat for process heat applications. As with all large projects developing and deploying new technologies, the NGNP is expected to meet high performance and availability targets relative to current state of the art systems and technology. One requirement for the NGNP is to provide heat for the generation of hydrogen for large scale productions and this process heat application is required to be at least 90% or more available relative to other technologies currently on the market. To reach this goal, a RAM Roadmap was developed highlighting the actions to be taken to ensure that various milestones in system development and maturation concurrently meet required availability requirements. Integral to the RAM Roadmap was the use of a RAM analytical/simulation tool which was used to estimate the availability of the system when deployed based on current design configuration and the maturation level of the system.

Applications of aerospace technology in the public sector

Science.gov (United States)

Anuskiewicz, T.; Johnston, J.; Zimmerman, R. R.

1971-01-01

Current activities of the program to accelerate specific applications of space related technology in major public sector problem areas are summarized for the period 1 June 1971 through 30 November 1971. An overview of NASA technology, technology applications, and supporting activities are presented. Specific technology applications in biomedicine are reported including cancer detection, treatment and research; cardiovascular diseases, diagnosis, and treatment; medical instrumentation; kidney function disorders, treatment, and research; and rehabilitation medicine.

Solar Ready: An Overview of Implementation Practices

Energy Technology Data Exchange (ETDEWEB)

Watson, A.; Guidice, L.; Lisell, L.; Doris, L.; Busche, S.

2012-01-01

This report explores three mechanisms for encouraging solar ready building design and construction: solar ready legislation, certification programs for solar ready design and construction, and stakeholder education. These methods are not mutually exclusive, and all, if implemented well, could contribute to more solar ready construction. Solar ready itself does not reduce energy use or create clean energy. Nevertheless, solar ready building practices are needed to reach the full potential of solar deployment. Without forethought on incorporating solar into design, buildings may be incompatible with solar due to roof structure or excessive shading. In these cases, retrofitting the roof or removing shading elements is cost prohibitive. Furthermore, higher up-front costs due to structural adaptations and production losses caused by less than optimal roof orientation, roof equipment, or shading will lengthen payback periods, making solar more expensive. With millions of new buildings constructed each year in the United States, solar ready can remove installation barriers and increase the potential for widespread solar adoption. There are many approaches to promoting solar ready, including solar ready legislation, certification programs, and education of stakeholders. Federal, state, and local governments have the potential to implement programs that encourage solar ready and in turn reduce barriers to solar deployment. With the guidance in this document and the examples of jurisdictions and organizations already working to promote solar ready building practices, federal, state, and local governments can guide the market toward solar ready implementation.

Technology and applications

International Nuclear Information System (INIS)

Bogdany, J.; Vesztergombi, G.

1994-07-01

The workshop on Parallel Processing, Technology and Applications, held February 10-11, Budapest, Hungary, covered a variety of topics on computer data processing and parallel computing. One of the 17 presentations discussed the need for massively parallel processing in support of future high energy experiments

Emerging Technologies Integrating Technology into Study Abroad

Science.gov (United States)

Godwin-Jones, Robert

2016-01-01

"Ready access to travel and to technology-enhanced social networking (e.g., Facebook or Skype) has changed the nature of study abroad to the point where today's experiences are fundamentally different from those of earlier eras" (Kinginger, 2013a, p. 345). In addition to more travel options and greater technology availability, study…

Cold atmospheric pressure plasma treatment of ready-to-eat meat

DEFF Research Database (Denmark)

Röd, Sara Katrine Solhøj; Hansen, Flemming; Leipold, Frank

Sliced ready-to-eat (RTE) meat products are susceptible to growth of the foodborne pathogenic bacterium, Listeria monocytogenes. Cold atmospheric pressure plasma (CAPP) may be applicable for surface decontamination in sealed bags thus avoiding recontamination. Plasmas (Fig. 1), created in neutral...

Current state of micro-robots/devices as substitutes for screening colonoscopy: assessment based on technology readiness levels.

Science.gov (United States)

Tapia-Siles, Silvia C; Coleman, Stuart; Cuschieri, Alfred

2016-02-01

Previous reports have described several candidates, which have the potential to replace colonoscopy, but to date, there is still no device capable of fully replacing flexible colonoscopy in the management of colonic disorders and for mass adult population screening for asymptomatic colorectal cancer. NASA developed the TRL methodology to describe and define the stages of development before use and marketing of any device. The definitions of the TRLS used in the present review are those formulated by "The US Department of Defense Technology Readiness Assessment Guidance" but adapted to micro-robots for colonoscopy. All the devices included are reported in scientific literature. They were identified by a systematic search in Web of Science, PubMed and IEEE Xplore amongst other sources. Devices that clearly lack the potential for full replacement of flexible colonoscopy were excluded. The technological salient features of all the devices included for assessment are described briefly, with particular focus on device propulsion. The devices are classified according to the TRL criteria based on the reported information. An analysis is next undertaken of the characteristics and salient features of the devices included in the review: wireless/tethered devices, data storage-transmission and navigation, additional functionality, residual technology challenges and clinical and socio-economical needs. Few devices currently possess the required functionality and performance to replace the conventional colonoscopy. The requirements, including functionalities which favour the development of a micro-robot platform to replace colonoscopy, are highlighted.

Green IT Readiness: A Framework and Preliminary Proof of Concept

Directory of Open Access Journals (Sweden)

Alemayehu Molla

2010-01-01

Full Text Available Businesses are under increasing pressure from customers, competitors, regulators and community groups to implement sustainable business practices. Balancing economic and environmental performance to be green and competitive is therefore a key strategic issue. The information technology (IT sector is one of the pioneer sectors which started working on the sustainable development model. However, it is only lately that researchers and organisations have begun to consider the role of IT, not only in contributing to a businesses environmental footprint but also in tackling climate change problems. Usually coined as, “Green Information Technology”, the role of IT in causing and resolving ecological sustainability, in maintaining low cost IT shops, in building green reputation capital and in supporting corporate green strategies has hardly been researched. This paper identifies four main areas of Green IT capability and describes the main pillars of a G-readiness framework to help organisations evaluate their maturity for Green IT. The utility of the framework is demonstrated through a desk-based research case study of seven organisations. The paper argues that just as e-readiness has been, and continues to be, a critical capability in the digital economy, G-readiness is an equally critical capability in the low carbon digital economy. Without a clear understanding of G-readiness, organisations would approach Green IT initiatives on an ad hoc and somewhat reactive basis, which is undesirable.

Magnetic levitation Maglev technology and applications

CERN Document Server

Han, Hyung-Suk

2016-01-01

This book provides a comprehensive overview of magnetic levitation (Maglev) technologies, from fundamental principles through to the state-of-the-art, and describes applications both realised and under development. It includes a history of Maglev science and technology showing the various milestones in its advancement. The core concepts, operating principles and main challenges of Maglev applications attempted across various fields are introduced and discussed. The principle difficulties encountered when applying Maglev technology to different systems, namely air gap control and stabilization, are addressed in detail. The book describes how major advancements in linear motor and magnet technologies have enabled the development of the linear-motor-powered Maglev train, which has a high speed advantage over conventional wheeled trains and has the potential to reach speed levels achieved by aircraft. However, many expect that Maglev technology to be a green technology that is applied not only in rail transportat...

FUEL-FLEXIBLE GASIFICATION-COMBUSTION TECHNOLOGY FOR PRODUCTION OF H2 AND SEQUESTRATION-READY CO2

International Nuclear Information System (INIS)

George Rizeq; Ravi Kumar; Janice West; Vitali Lissianski; Neil Widmer; Vladimir Zamansky

2001-01-01

It is expected that in the 21st century the Nation will continue to rely on fossil fuels for electricity, transportation, and chemicals. It will be necessary to improve both the thermodynamic efficiency and environmental impact performance of fossil fuel utilization. General Electric Energy and Environmental Research Corporation (GE-EER) has developed an innovative fuel-flexible Advanced Gasification-Combustion (AGC) concept to produce H(sub 2) and sequestration-ready CO(sub 2) from solid fuels. The AGC module offers potential for reduced cost and increased energy efficiency relative to conventional gasification and combustion systems. GE-EER was awarded a Vision-21 program from U.S. DOE NETL to develop the AGC technology. Work on this three-year program started on October 1, 2000. The project team includes GE-EER, California Energy Commission, Southern Illinois University at Carbondale, and T. R. Miles, Technical Consultants, Inc. In the AGC technology, coal/opportunity fuels and air are simultaneously converted into separate streams of (1) pure hydrogen that can be utilized in fuel cells, (2) sequestration-ready CO(sub 2), and (3) high temperature/pressure oxygen depleted air to produce electricity in a gas turbine. The process produces near-zero emissions and, based on preliminary modeling work in the first quarter of this program, has an estimated process efficiency of approximately 67% based on electrical and H(sub 2) energy outputs relative to the higher heating value of coal. The three-year R and D program will determine the operating conditions that maximize separation of CO(sub 2) and pollutants from the vent gas, while simultaneously maximizing coal conversion efficiency and hydrogen production. The program integrates lab-, bench- and pilot-scale studies to demonstrate the AGC concept. This is the 1st quarterly progress report for the Vision-21 AGC program supported by U.S. DOE NETL (Contract: DE-FC26-00FT40974). This report summarizes program

Technology Estimating 2: A Process to Determine the Cost and Schedule of Space Technology Research and Development

Science.gov (United States)

Cole, Stuart K.; Wallace, Jon; Schaffer, Mark; May, M. Scott; Greenberg, Marc W.

2014-01-01

As a leader in space technology research and development, NASA is continuing in the development of the Technology Estimating process, initiated in 2012, for estimating the cost and schedule of low maturity technology research and development, where the Technology Readiness Level is less than TRL 6. NASA' s Technology Roadmap areas consist of 14 technology areas. The focus of this continuing Technology Estimating effort included four Technology Areas (TA): TA3 Space Power and Energy Storage, TA4 Robotics, TA8 Instruments, and TA12 Materials, to confine the research to the most abundant data pool. This research report continues the development of technology estimating efforts completed during 2013-2014, and addresses the refinement of parameters selected and recommended for use in the estimating process, where the parameters developed are applicable to Cost Estimating Relationships (CERs) used in the parametric cost estimating analysis. This research addresses the architecture for administration of the Technology Cost and Scheduling Estimating tool, the parameters suggested for computer software adjunct to any technology area, and the identification of gaps in the Technology Estimating process.

NASA's progress in nuclear electric propulsion technology

International Nuclear Information System (INIS)

Stone, J.R.; Doherty, M.P.; Peecook, K.M.

1993-01-01

The National Aeronautics and Space Administration (NASA) has established a requirement for Nuclear Electric Propulsion (NEP) technology for robotic planetary science mission applications with potential future evolution to systems for piloted Mars vehicles. To advance the readiness of NEP for these challenging missions, a near-term flight demonstration on a meaningful robotic science mission is very desirable. The requirements for both near-term and outer planet science missions are briefly reviewed, and the near-term baseline system established under a recent study jointly conducted by the Lewis Research Center (LeRC) and the Jet Propulsion Laboratory (JPL) is described. Technology issues are identified where work is needed to establish the technology for the baseline system, and technology opportunities which could provide improvement beyond baseline capabilities are discussed. Finally, the plan to develop this promising technology is presented and discussed. 19 refs

Adoption of Mobile Technology for Teaching Preparation in Improving Teaching Quality of Teachers

Science.gov (United States)

Nawi, Aliff; Hamzah, Mohd Isa; Ren, Chua Chy; Tamuri, Ab Halim

2015-01-01

This study aims to identify the readiness of teachers to use mobile phones for the purpose of teaching preparation. The study also reviewed the level of teachers' satisfaction when using the mobile technology applications developed for the purpose of teaching and learning in the classroom. This study used the mix method to collect data. A total of…

Computer technology: its potential for industrial energy conservation. A technology applications manual

Energy Technology Data Exchange (ETDEWEB)

None

1979-01-01

Today, computer technology is within the reach of practically any industrial corporation regardless of product size. This manual highlights a few of the many applications of computers in the process industry and provides the technical reader with a basic understanding of computer technology, terminology, and the interactions among the various elements of a process computer system. The manual has been organized to separate process applications and economics from computer technology. Chapter 1 introduces the present status of process computer technology and describes the four major applications - monitoring, analysis, control, and optimization. The basic components of a process computer system also are defined. Energy-saving applications in the four major categories defined in Chapter 1 are discussed in Chapter 2. The economics of process computer systems is the topic of Chapter 3, where the historical trend of process computer system costs is presented. Evaluating a process for the possible implementation of a computer system requires a basic understanding of computer technology as well as familiarity with the potential applications; Chapter 4 provides enough technical information for an evaluation. Computer and associated peripheral costs and the logical sequence of steps in the development of a microprocessor-based process control system are covered in Chapter 5.

Evidence based practice readiness: A concept analysis.

Science.gov (United States)

Schaefer, Jessica D; Welton, John M

2018-01-15

To analyse and define the concept "evidence based practice readiness" in nurses. Evidence based practice readiness is a term commonly used in health literature, but without a clear understanding of what readiness means. Concept analysis is needed to define the meaning of evidence based practice readiness. A concept analysis was conducted using Walker and Avant's method to clarify the defining attributes of evidence based practice readiness as well as antecedents and consequences. A Boolean search of PubMed and Cumulative Index for Nursing and Allied Health Literature was conducted and limited to those published after the year 2000. Eleven articles met the inclusion criteria for this analysis. Evidence based practice readiness incorporates personal and organisational readiness. Antecedents include the ability to recognize the need for evidence based practice, ability to access and interpret evidence based practice, and a supportive environment. The concept analysis demonstrates the complexity of the concept and its implications for nursing practice. The four pillars of evidence based practice readiness: nursing, training, equipping and leadership support are necessary to achieve evidence based practice readiness. Nurse managers are in the position to address all elements of evidence based practice readiness. Creating an environment that fosters evidence based practice can improve patient outcomes, decreased health care cost, increase nurses' job satisfaction and decrease nursing turnover. © 2018 John Wiley & Sons Ltd.

What Are the Costs of Trauma Center Readiness? Defining and Standardizing Readiness Costs for Trauma Centers Statewide.

Science.gov (United States)

Ashley, Dennis W; Mullins, Robert F; Dente, Christopher J; Garlow, Laura; Medeiros, Regina S; Atkins, Elizabeth V; Solomon, Gina; Abston, Dena; Ferdinand, Colville H

2017-09-01

Trauma center readiness costs are incurred to maintain essential infrastructure and capacity to provide emergent services on a 24/7 basis. These costs are not captured by traditional hospital cost accounting, and no national consensus exists on appropriate definitions for each cost. Therefore, in 2010, stakeholders from all Level I and II trauma centers developed a survey tool standardizing and defining trauma center readiness costs. The survey tool underwent minor revisions to provide further clarity, and the survey was repeated in 2013. The purpose of this study was to provide a follow-up analysis of readiness costs for Georgia's Level I and Level II trauma centers. Using the American College of Surgeons Resources for Optimal Care of the Injured Patient guidelines, four readiness cost categories were identified: Administrative, Clinical Medical Staff, Operating Room, and Education/Outreach. Through conference calls, webinars and face-to-face meetings with financial officers, trauma medical directors, and program managers from all trauma centers, standardized definitions for reporting readiness costs within each category were developed. This resulted in a survey tool for centers to report their individual readiness costs for one year. The total readiness cost for all Level I trauma centers was $34,105,318 (avg $6,821,064) and all Level II trauma centers was $20,998,019 (avg $2,333,113). Methodology to standardize and define readiness costs for all trauma centers within the state was developed. Average costs for Level I and Level II trauma centers were identified. This model may be used to help other states define and standardize their trauma readiness costs.

MAIN TENDENCIES OF NON-LINEAR TECHNOLOGY DEVELOPMENT

Directory of Open Access Journals (Sweden)

Vladimir Nesterov

2013-01-01

Full Text Available The first decade of the new century was marked by considerable extension of NLStechnology’s diagnostic features, first of all by means of new technologies introduction and using the ultra-high performance computers. Pragmatic market of 3D-visualizing diagnostic technologies will be formed gradually by means of harmless non-ionizing methods, allowing to fulfill multiple dynamic researches, i.e. NLS-technologies undoubtedly will come to the fore. More and more clinical therapists realize the necessity to master NLS-diagnostic equipment, because the needs for properly educated experts in this field are obvious. However, among traditional medical specialists, there is a tendency to pay more attention to researches with computed X-ray imaging and magnetic resonance imaging. That is why the NLS-technologies, unfortunately, are still hidden among more orthodox methods of diagnostics. Clinicians will be ready (in many aspects are already ready to improve their diagnostic possibilities by using the NLStechnology, often without X-CT, MRI and radionuclide methods. Nevertheless, only in strategic partnership of NLS-diagnostics experts, radiologists and clinicians may be found a key to optimal diagnostic and healing application of this, in all senses, original and efficient medical technology. The article presents the main principles of medical diagnostics using the NLSmethod. It contains generalized evaluation of the NLS-method’s diagnostic possibilities in revealing various organs’ pathologies and gives an analysis of this method development prospects.

New ultraportable display technology and applications

Science.gov (United States)

Alvelda, Phillip; Lewis, Nancy D.

1998-08-01

MicroDisplay devices are based on a combination of technologies rooted in the extreme integration capability of conventionally fabricated CMOS active-matrix liquid crystal display substrates. Customized diffraction grating and optical distortion correction technology for lens-system compensation allow the elimination of many lenses and systems-level components. The MicroDisplay Corporation's miniature integrated information display technology is rapidly leading to many new defense and commercial applications. There are no moving parts in MicroDisplay substrates, and the fabrication of the color generating gratings, already part of the CMOS circuit fabrication process, is effectively cost and manufacturing process-free. The entire suite of the MicroDisplay Corporation's technologies was devised to create a line of application- specific integrated circuit single-chip display systems with integrated computing, memory, and communication circuitry. Next-generation portable communication, computer, and consumer electronic devices such as truly portable monitor and TV projectors, eyeglass and head mounted displays, pagers and Personal Communication Services hand-sets, and wristwatch-mounted video phones are among the may target commercial markets for MicroDisplay technology. Defense applications range from Maintenance and Repair support, to night-vision systems, to portable projectors for mobile command and control centers.

HAMLET: HPCN Technology for Real-Time, Embedded Applications

NARCIS (Netherlands)

Mager, J.W.L.J.; Dam, A. ten

1995-01-01

Building an application by using HPCN technology makes the solution scalable and therefore more flexible. The uptake of HPCN technology for real-time, embedded applications, however, is severely hampered by the lack of real application development support. Within the Esprit project HAMLET,

2D Vertical Heterostructures for Novel Tunneling Device Applications

Science.gov (United States)

2017-03-01

2D Vertical Heterostructures for Novel Tunneling Device Applications Philip M. Campbell, Christopher J. Perini, W. Jud Ready, and Eric M. Vogel...School of Materials Science and Engineering Georgia Institute of Technology Atlanta, GA, USA 30332 Abstract: Vertical heterostructures...digital logic, signal processing, analog-to-digital conversion, and high-frequency communications, vertical heterostructure tunneling devices have

System of management of maintenance oriented to the safety and the readiness

International Nuclear Information System (INIS)

Torres V, A.; Rivero O, J.J.

2004-01-01

One of the fundamental causes of the high contribution of the maintenance to those problems of security and readiness of the facilities is the inadequacy of those systems of maintenance administration to solve of form to balanced the problems of security and readiness of the same ones. Leaving of this statement, in the article a synthesis of the investigation of the current state of the management systems is presented of the maintenance in their relationship with the security of the facilities. Likewise, it summarizes the development of an integrative algorithm for the administration of the maintenance guided to the security and the readiness, which has been materialized in the code MOSEG Win to See 1.0. Finally some of the applications are presented carried out with the system. (Author)

In-Space Propulsion Technology Products for NASA's Future Science and Exploration Missions

Science.gov (United States)

Anderson, David J.; Pencil, Eric; Peterson, Todd; Dankanich, John; Munk, Michelle M.

2011-01-01

Since 2001, the In-Space Propulsion Technology (ISPT) project has been developing and delivering in-space propulsion technologies that will enable or enhance NASA robotic science missions. These in-space propulsion technologies are applicable, and potentially enabling, for future NASA flagship and sample return missions currently being considered, as well as having broad applicability to future competed mission solicitations. The high-temperature Advanced Material Bipropellant Rocket (AMBR) engine providing higher performance for lower cost was completed in 2009. Two other ISPT technologies are nearing completion of their technology development phase: 1) NASA's Evolutionary Xenon Thruster (NEXT) ion propulsion system, a 0.6-7 kW throttle-able gridded ion system; and 2) Aerocapture technology development with investments in a family of thermal protection system (TPS) materials and structures; guidance, navigation, and control (GN&C) models of blunt-body rigid aeroshells; aerothermal effect models: and atmospheric models for Earth, Titan, Mars and Venus. This paper provides status of the technology development, applicability, and availability of in-space propulsion technologies that have recently completed their technology development and will be ready for infusion into NASA s Discovery, New Frontiers, Science Mission Directorate (SMD) Flagship, and Exploration technology demonstration missions

The Application of RFID Technologies in Construction

Institute of Scientific and Technical Information of China (English)

LIAN Meng

2009-01-01

RFID technologies have advanced greatly and deployed successfully in many industry sectors in recent years. Construction industry could benefit from the applications of RFID technologies but as yet has not found sufficient application areas. This project gives a comprehensive awareness of the RFID technologies, which focus on the investigation on the UK construction industry. The current status of RFID in construction and its potentials are specified in the analysis of questionnaires and case studies. Finally, basing on the investigations, some further tasks in developing RFID technologies are carried, including some recommendations, for the construction industry.

Ultrashort pulse laser technology laser sources and applications

CERN Document Server

Schrempel, Frank; Dausinger, Friedrich

2016-01-01

Ultrashort laser pulses with durations in the femtosecond range up to a few picoseconds provide a unique method for precise materials processing or medical applications. Paired with the recent developments in ultrashort pulse lasers, this technology is finding its way into various application fields. The book gives a comprehensive overview of the principles and applications of ultrashort pulse lasers, especially applied to medicine and production technology. Recent advances in laser technology are discussed in detail. This covers the development of reliable and cheap low power laser sources as well as high average power ultrashort pulse lasers for large scale manufacturing. The fundamentals of laser-matter-interaction as well as processing strategies and the required system technology are discussed for these laser sources with respect to precise materials processing. Finally, different applications within medicine, measurement technology or materials processing are highlighted.

Preparing for success: Readiness models for rural telehealth

Directory of Open Access Journals (Sweden)

Jennett P

2005-01-01

Full Text Available Background: Readiness is an integral and preliminary step in the successful implementation of telehealth services into existing health systems within rural communities. Methods and Materials: This paper details and critiques published international peer-reviewed studies that have focused on assessing telehealth readiness for rural and remote health. Background specific to readiness and change theories is provided, followed by a critique of identified telehealth readiness models, including a commentary on their readiness assessment tools. Results: Four current readiness models resulted from the search process. The four models varied across settings, such as rural outpatient practices, hospice programs, rural communities, as well as government agencies, national associations, and organizations. All models provided frameworks for readiness tools. Two specifically provided a mechanism by which communities could be categorized by their level of telehealth readiness. Discussion: Common themes across models included: an appreciation of practice context, strong leadership, and a perceived need to improve practice. Broad dissemination of these telehealth readiness models and tools is necessary to promote awareness and assessment of readiness. This will significantly aid organizations to facilitate the implementation of telehealth.

Readiness for change and job satisfaction in a case of lean management application - a comparative study.

Science.gov (United States)

Lipińska-Grobelny, Agnieszka; Papieska, Ewelina

2012-09-01

This current study investigates the effect of lean management system on work attitudes of workers of two manufacturing companies. "Lean management" is a concept of work processes and human relations that determines company's productivity and profitability. Workers of two enterprises, the first one with lean production and the second one with old mass production, were compared for their readiness for change and job satisfaction (both emotional and cognitive aspect). The sample of 102 employees completed a battery of instruments such as: the Job Description Inventory by Neuberger and Allerbeck, the Job Affect Scale by Burke et al. and the Change-Readiness Scale by Kriegel and Brandt. Individuals from the lean manufacturing company were characterized by higher level of readiness for change, positive affect at work, and cognitive job satisfaction. In this approach the introduction of lean production positively affected company's human resource attitudes.

Costs of a Hospital-Based, Ready-To-Use Syringe Delivery Programme

DEFF Research Database (Denmark)

Risør, Bettina Wulff; Vand, S; Lisby, M

2017-01-01

%) and at €20,905 (an increase of 228%) for the endoscopy department. The ready-to-use delivery program imposed an additional cost of €11.32 per day surgery operation and €2.41 per endoscopy procedure. Conclusion: This ready-to-use programme increased the cost of the medical handling process. This incremental......Objective: The risk of errors in the medication administration process is high. Applications of pre lled syringes may improve patient safety but could be more costly. The objective of this study was to assess the additional costs of a ready-to-use syringe delivery programme in comparison...... with a conventional delivery programme at day surgery and endoscopy departments at a large university hospital. Methods: The cost analysis used the hospital perspective and developed an “activity-based costing” model to assess the costs of medicine- handling activities. The model was calibrated with six-month data...

Applications of Blockchain Technology beyond Cryptocurrency

OpenAIRE

Miraz, Mahdi H.; Ali, Maaruf

2018-01-01

Blockchain (BC), the technology behind the Bitcoin crypto-currency system, is considered to be both alluring and critical for ensuring enhanced security and (in some implementations, non-traceable) privacy for diverse applications in many other domains - including in the Internet of Things (IoT) eco-system. Intensive research is currently being conducted in both academia and industry applying the Blockchain technology in multifarious applications. Proof-of-Work (PoW), a cryptographic puzzle, ...

Remedial action and waste disposal project -- 300-FF-1 remedial action readiness assessment plan

International Nuclear Information System (INIS)

April, J.G.; Carlson, R.A.; Greif, A.A.; Johnson, C.R.; Orewiler, R.I.; Perry, D.M.; Plastino, J.C.; Roeck, F.V.; Tuttle, B.G.

1997-04-01

This Readiness Assessment Plan presents the methodology used to assess the readiness of the 300-FF-1 Remedial Action Project. Remediation involves the excavation, treatment if applicable, and final disposal of contaminated soil and debris associated with the waste sites in the 300-FF-1 Operable Unit. The scope of the 300-FF-1 remediation is to excavate, transport, and dispose of contaminated solid from sites identified in the 300-FF-1 Operable Unit

Technology Maturation in Preparation for the Cryogenic Propellant Storage and Transfer (CPST) Technology Demonstration Mission (TDM)

Science.gov (United States)

Meyer, Michael L.; Doherty, Michael P.; Moder, Jeffrey P.

2014-01-01

In support of its goal to find an innovative path for human space exploration, NASA embarked on the Cryogenic Propellant Storage and Transfer (CPST) Project, a Technology Demonstration Mission (TDM) to test and validate key cryogenic capabilities and technologies required for future exploration elements, opening up the architecture for large in-space cryogenic propulsion stages and propellant depots. Recognizing that key Cryogenic Fluid Management (CFM) technologies anticipated for on-orbit (flight) demonstration would benefit from additional maturation to a readiness level appropriate for infusion into the design of the flight demonstration, the NASA Headquarters Space Technology Mission Directorate (STMD) authorized funding for a one-year technology maturation phase of the CPST project. The strategy, proposed by the CPST Project Manager, focused on maturation through modeling, concept studies, and ground tests of the storage and fluid transfer of CFM technology sub-elements and components that were lower than a Technology Readiness Level (TRL) of 5. A technology maturation plan (TMP) was subsequently approved which described: the CFM technologies selected for maturation, the ground testing approach to be used, quantified success criteria of the technologies, hardware and data deliverables, and a deliverable to provide an assessment of the technology readiness after completion of the test, study or modeling activity. The specific technologies selected were grouped into five major categories: thick multilayer insulation, tank applied active thermal control, cryogenic fluid transfer, propellant gauging, and analytical tool development. Based on the success of the technology maturation efforts, the CPST project was approved to proceed to flight system development.

Applications and advances in electronic-nose technologies

Science.gov (United States)

A. D. Wilson; M. Baietto

2009-01-01

Electronic-nose devices have received considerable attention in the field of sensor technology during the past twenty years, largely due to the discovery of numerous applications derived from research in diverse fields of applied sciences. Recent applications of electronic nose technologies have come through advances in sensor design, material improvements, software...

From Readiness to Action: How Motivation Works

Directory of Open Access Journals (Sweden)

Kruglanski Arie W.

2014-09-01

Full Text Available We present a new theoretical construct labeled motivational readiness. It is defined as the inclination, whether or not ultimately implemented, to satisfy a desire. A general model of readiness is described which builds on the work of prior theories, including animal learning models and personality approaches, and which aims to integrate a variety of research findings across different domains of motivational research. Components of this model include the Want state (that is, an individual’s currently active desire, and the Expectancy of being able to satisfy that Want. We maintain that the Want concept is the critical ingredient in motivational readiness: without it, readiness cannot exist. In contrast, some motivational readiness can exist without Expectancy. We also discuss the role of incentive in motivational readiness. Incentive is presently conceived of in terms of a Match between a Want and a Perceived Situational Affordance. Whereas in classic models incentive was portrayed as a first order determinant of motivational readiness, here we describe it as a second order factor which affects readiness by influencing Want, Expectancy, or both. The new model’s relation to its theoretical predecessors, and its implications for future research, also are discussed.

Bridging the Gap from Networking Technologies to Applications: Workshop Report

Science.gov (United States)

Johnson, Marjory J.; desJardins, Richard

2000-01-01

The objective of the Next Generation Internet (NGI) Federal program is threefold, encompassing development of networking technologies, high-performance network testbeds, and revolutionary applications. There have been notable advances in emerging network technologies and several nationwide testbeds have been established, but the integration of emerging technologies into applications is lagging. To help bridge this gap between developers of NGI networking technologies and developers of NGI applications, the NASA Research and Education Network (NREN) project hosted a two-day workshop at NASA Ames Research Center in August 1999. This paper presents a summary of the results of this workshop and also describes some of the challenges NREN is facing while incorporating new technologies into HPCC and other NASA applications. The workshop focused on three technologies - Quality of Service (QoS), advanced multicast, and security-and five major NGI application areas - telemedicine, digital earth, digital video, distributed data-intensive applications, and computational infrastructure applications. Network technology experts, application developers, and NGI testbed representatives came together at the workshop to promote cross-fertilization between the groups. Presentations on the first day, including an overview of the three technologies, application case studies and testbed status reports, laid the foundation for discussions on the second day. The objective of these latter discussions, held within smaller breakout groups, was to establish a coherent picture of the current status of the various pieces of each of the three technologies, to create a roadmap outlining future technology development, and to offer technological guidance to application developers. In this paper we first present a brief overview of the NGI applications that were represented at the workshop, focusing on the identification of technological advances that have successfully been incorporated in each

Use of Residual Solids from Pulp and Paper Mills for Enhancing Strength and Durability of Ready-Mixed Concrete

Energy Technology Data Exchange (ETDEWEB)

Tarun R. Naik; Yoon-moon Chun; Rudolph N. Kraus

2003-09-18

This research was conducted to establish mixture proportioning and production technologies for ready-mixed concrete containing pulp and paper mill residual solids and to study technical, economical, and performance benefits of using the residual solids in the concrete. Fibrous residuals generated from pulp and paper mills were used, and concrete mixture proportions and productions technologies were first optimized under controlled laboratory conditions. Based on the mixture proportions established in the laboratory, prototype field concrete mixtures were manufactured at a ready-mixed concrete plant. Afterward, a field construction demonstration was held to demonstrate the production and placement of structural-grade cold-weather-resistant concrete containing residual solids.

Technology guide. Principles - applications - trends

Energy Technology Data Exchange (ETDEWEB)

Bullinger, Hans-Joerg (ed.) [Fraunhofer-Gesellschaft, Muenchen (Germany)

2009-07-01

Use this TECHNOLOGY GUIDE to - find descriptions of today's most essential global technologies, clearly structured and simply explained in over 100 expert contributions; - gain an understanding of the principles behind each technology, - the latest applications, the challenges ahead, and future trends; - see how and where technologies and topics are interlinked, with cross-references and further sources of information; - broaden your general knowledge of technology, presented in a comprehensive reference format that invites even the casual reader to explore the stimulating innovative ideas it contains. This guide is a useful companion for readers with a lively interest in technology. It serves as a reference work for corporate and public-sector decision makers, as well as those involved in media and government. (orig.)

Development and applicability of a ready-to-use PCR system for GMO screening.

Science.gov (United States)

Rosa, Sabrina F; Gatto, Francesco; Angers-Loustau, Alexandre; Petrillo, Mauro; Kreysa, Joachim; Querci, Maddalena

2016-06-15

With the growing number of GMOs introduced to the market, testing laboratories have seen their workload increase significantly. Ready-to-use multi-target PCR-based detection systems, such as pre-spotted plates (PSP), reduce analysis time while increasing capacity. This paper describes the development and applicability to GMO testing of a screening strategy involving a PSP and its associated web-based Decision Support System. The screening PSP was developed to detect all GMOs authorized in the EU in one single PCR experiment, through the combination of 16 validated assays. The screening strategy was successfully challenged in a wide inter-laboratory study on real-life food/feed samples. The positive outcome of this study could result in the adoption of a PSP screening strategy across the EU; a step that would increase harmonization and quality of GMO testing in the EU. Furthermore, this system could represent a model for other official control areas where high-throughput DNA-based detection systems are needed. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Industrial applications of radiation technology

International Nuclear Information System (INIS)

Sabharwal, Sunil

2005-01-01

In recent years, radiation processing has emerged as an alternative to conventional technologies such as thermal and chemical processing for many industrial applications. The industry is expanding at a fast rate all over the world. The actual industrial benefits on commercial basis, however, depends on the need of the individual society and may vary from country to country. In India, the applications of radiation technology have been found in areas of health care, agriculture, food preservation, industry and environment. Both gamma radiation and electron beam accelerators are being utilized for this purpose. Presently, 6 commercial gamma irradiators housing about 1.5 million curie 60 Co and an annual turnover of over US$ 2 million and 3 commercial electron beam (EB) accelerators with installed capacity of 185 kW are commercially operating in India. The new areas being explored include use of electron beam irradiation for surface treatment, radiation processed membranes for a variety of applications and radiation processing of natural polymers. In the present paper, the current status of this program, especially the recent developments and future direction of radiation processing technology is reviewed. (author)

Vogtle Unit 1 readiness review: Assessment of Georgia Power Company readiness review pilot program

International Nuclear Information System (INIS)

Lewis, G.

1987-09-01

Georgia Power Company (GPC) performed a readiness review at Vogtle Unit 1 as a pilot program. The pilot program was a new and innovative approach for the systematic and disciplined review, with senior management involvement, of GPC's implementation of design, construction, and operational readiness processes. The program's principal objective was to increase the level of assurance that quality programs at Vogtle Unit 1 have been accomplished in accordance with regulatory requirements. This report assesses the effectiveness of the GPC's readiness review pilot program (RRPP) at Vogtle Unit 1. It includes (1) an overview of what was experienced during the program's implementation, (2) an assessment of how well program objectives were met, and (3) lessons learned on the future use of the readiness review concept. Overall, GPC and the NRC staff believe that the RRPP at Vogtle Unit 1 was a success and that the program provided significant added assurance that Vogtle Unit 1 licensing commitments and NRC regulations have been adequately implemented. Although altering the NRC licensing review process for the few plants still in the construction pipeline may not be appropriate, licensees may benefit significantly by performing readiness reviews on their own initiative as GPC did for Vogtle. (7 refs.)

Factors of children's school readiness

Directory of Open Access Journals (Sweden)

Ljubica Marjanovič Umek

2006-12-01

Full Text Available The purpose of the study was to examine the effect of preschool on children's school readiness in connection with their intellectual abilities, language competence, and parents' education. The sample included 219 children who were 68 to 83 months old and were attending the first year of primary school. Children were differentiated by whether or not they had attended preschool before starting school. Children's intellectual ability was determined using Raven's Coloured Progressive Matrices (CPM; Raven, Raven, & Court, 1999, language competence using the Lestvice splošnega govornegarazvoja–LJ (LSGR–LJ, Scales of General Language Development; Marjanovič Umek, Kranjc, Fekonja in Bajc, 2004, and school readiness with the Preizkus pripravljenosti za šolo (PPŠ, Test of School Readiness; Toličič, 1986. The results indicate that children's intellectual ability and language competence have a high predictive value for the school readiness — they explained 51% of the variance in children's scores on the PPŠ. Preschool enrollment has a positive effect on school readiness for children whose parents have a low level of education, but not for those whose parents are highly educated.

The Application of Nuclear Technology for a Better World

International Nuclear Information System (INIS)

Ita, E.B.

2015-01-01

Nuclear Technology is widely used in different areas and sector of our economy to better man kind and his environment. Peaceful applications of nuclear technology have several benefits to the world today. It is widely believed that nuclear technology is mainly used mainly for the production of electricity (Nuclear Power Plants – NPPs). Many are not aware of the other numerous benefits of nuclear technology. Nuclear technology can be applied in different fields for numerous benefits. Different sectors Nuclear Technology application can improve the living standard of man and his environment: – Food and Agriculture; – Medicine; – Industrial; – Energy; – Education; — Research and Development; – Environment. The benefits of the application of nuclear technology cannot be over emphasised. These benefits range from the improved quality of purified water we drink, the textiles we wear, improved quality of stored grains for preservation of foods, water analyses, improved transportation system work, drugs production, medical tests and analysis, clean environment through radioisotope techniques etc. The application of nuclear technology also gives a safer, greener, healthier and pollution free environment and atmosphere for human habitation. In my poster, the numerous benefits of the various applications of Nuclear Technology will be clearly enumerated and heighted. (author)

Laser diode technology and applications

International Nuclear Information System (INIS)

Figueroa, L.

1989-01-01

This book covers a wide range of semiconductor laser technology, from new laser structures and laser design to applications in communications, remote sensing, and optoelectronics. The authors report on new laser diode physics and applications and present a survey of the state of the art as well as progress in new developments

UWB Technology and Applications on Space Exploration

Science.gov (United States)

Ngo, Phong; Phan, Chau; Gross, Julia; Dusl, John; Ni, Jianjun; Rafford, Melinda

2006-01-01

Ultra-wideband (UWB), also known as impulse or carrier-free radio technology, is one promising new technology. In February 2002, the Federal Communications Commission (FCC) approved the deployment of this technology. It is increasingly recognized that UWB technology holds great potential to provide significant benefits in many terrestrial and space applications such as precise positioning/tracking and high data rate mobile wireless communications. This talk presents an introduction to UWB technology and some applications on space exploration. UWB is characterized by several uniquely attractive features, such as low impact on other RF systems due to its extremely low power spectral densities, immunity to interference from narrow band RF systems due to its ultra-wide bandwidth, multipath immunity to fading due to ample multipath diversity, capable of precise positioning due to fine time resolution, capable of high data rate multi-channel performance. The related FCC regulations, IEEE standardization efforts and industry activities also will be addressed in this talk. For space applications, some projects currently under development at NASA Johnson Space Center will be introduced. These include the UWB integrated communication and tracking system for Lunar/Mars rover and astronauts, UWB-RFID ISS inventory tracking, and UWB-TDOA close-in high resolution tracking for potential applications on robonaut.

College Readiness: The Evaluation of Students Participating in the Historically Black College and University Program in Pre-Calculus and the Calculus Sequence

Science.gov (United States)

Hall, Angela Renee

2011-01-01

This investigative research focuses on the level of readiness of Science, Technology, Engineering, and Mathematics (STEM) students entering Historically Black Colleges and Universities (HBCU) in the college Calculus sequence. Calculus is a fundamental course for STEM courses. The level of readiness of the students for Calculus can very well play a…

Cognitive Readiness

National Research Council Canada - National Science Library

Morrison, John

2002-01-01

Cognitive readiness is described as the mental preparation an individual needs to establish and sustain competent performance in the complex and unpredictable environment of modern military operations...

A Survey of the Rapidly Emerging Field of Nanotechnology: Potential Applications for Scientific Instruments and Technologies for Atmospheric Entry Probes

Science.gov (United States)

Meyyappan, M.; Arnold, J. O.

2005-01-01

The field of Nanotechnology is well funded worldwide and innovations applicable to Solar System Exploration are emerging much more rapidly than thought possible just a few years ago. This presentation will survey recent innovations from nanotechnololgy with a focus on novel applications to atmospheric entry science and probe technology, in a fashion similar to that presented by Arnold and Venkatapathy at the previous workshop forum at Lisbon Portugal, October 6-9, 2003. Nanotechnology is a rapidly emerging field that builds systems, devices and materials from the bottom up, atom by atom, and in so doing provides them with novel and remarkable macro-scale performance. This technology has the potential to revolutionize space exploration by reducing mass and simultaneously increasing capability. Thermal, Radiation, Impact Protective Shields: Atmospheric probes and humans on long duration deep space missions involved in Solar System Exploration must safely endure 3 significant hazards: (i) atmospheric entry; (ii) radiation; and (iii) micrometeorite or debris impact. Nanostructured materials could be developed to address all three hazards with a single protective shield, which would involve much less mass than a traditional approach. The concept can be ready in time for incorporation into NASA s Crew Exploration Vehicle, and possible entry probes to fly on the Jupiter Icy Moons

SaludABLEOmaha: improving readiness to address obesity through healthy lifestyle in a Midwestern Latino community, 2011-2013.

Science.gov (United States)

Frerichs, Leah; Brittin, Jeri; Robbins, Regina; Steenson, Sharalyn; Stewart, Catherine; Fisher, Christopher; Huang, Terry T-K

2015-02-12

A community's readiness for change is a precursor to the effective application of evidence-based practices for health promotion. Research is lacking regarding potential strategies to improve readiness to address obesity-related health issues in underserved communities. This case study describes SaludABLEOmaha, an initiative to increase readiness of residents in a Midwestern Latino community to address obesity and adopt healthy lifestyles. SaludABLEOmaha emphasized 2 core approaches, youth activism and collaboration among public and private institutions, which we applied to planning and implementing tactics in support of 3 interconnected strategies: 1) social marketing and social media, 2) service learning in schools (ie, curricula that integrate hands-on community service with instruction and reflection), and 3) community and business engagement. Following the Community Readiness Model protocol (http://triethniccenter.colostate.edu/communityReadiness.htm), structured interviews were conducted with community leaders and analyzed before and 2.5 years after launch of the program. The community increased in readiness from stage 3 of the Community Readiness Model, "vague awareness," at baseline to stage 5, "preparation," at follow-up. SaludABLEOmaha improved community readiness (eg, community knowledge, community climate), which probably contributed to the observed increase in readiness to address obesity through healthy lifestyle. Community mobilization approaches such as youth activism integrated with social marketing and social media tactics can improve community responsiveness to obesity prevention and diminish health disparities.

A theory of organizational readiness for change

Directory of Open Access Journals (Sweden)

Weiner Bryan J

2009-10-01

Full Text Available Abstract Background Change management experts have emphasized the importance of establishing organizational readiness for change and recommended various strategies for creating it. Although the advice seems reasonable, the scientific basis for it is limited. Unlike individual readiness for change, organizational readiness for change has not been subject to extensive theoretical development or empirical study. In this article, I conceptually define organizational readiness for change and develop a theory of its determinants and outcomes. I focus on the organizational level of analysis because many promising approaches to improving healthcare delivery entail collective behavior change in the form of systems redesign--that is, multiple, simultaneous changes in staffing, work flow, decision making, communication, and reward systems. Discussion Organizational readiness for change is a multi-level, multi-faceted construct. As an organization-level construct, readiness for change refers to organizational members' shared resolve to implement a change (change commitment and shared belief in their collective capability to do so (change efficacy. Organizational readiness for change varies as a function of how much organizational members value the change and how favorably they appraise three key determinants of implementation capability: task demands, resource availability, and situational factors. When organizational readiness for change is high, organizational members are more likely to initiate change, exert greater effort, exhibit greater persistence, and display more cooperative behavior. The result is more effective implementation. Summary The theory described in this article treats organizational readiness as a shared psychological state in which organizational members feel committed to implementing an organizational change and confident in their collective abilities to do so. This way of thinking about organizational readiness is best suited for

Blockchain distributed ledger technologies for biomedical and health care applications.

Science.gov (United States)

Kuo, Tsung-Ting; Kim, Hyeon-Eui; Ohno-Machado, Lucila

2017-11-01

To introduce blockchain technologies, including their benefits, pitfalls, and the latest applications, to the biomedical and health care domains. Biomedical and health care informatics researchers who would like to learn about blockchain technologies and their applications in the biomedical/health care domains. The covered topics include: (1) introduction to the famous Bitcoin crypto-currency and the underlying blockchain technology; (2) features of blockchain; (3) review of alternative blockchain technologies; (4) emerging nonfinancial distributed ledger technologies and applications; (5) benefits of blockchain for biomedical/health care applications when compared to traditional distributed databases; (6) overview of the latest biomedical/health care applications of blockchain technologies; and (7) discussion of the potential challenges and proposed solutions of adopting blockchain technologies in biomedical/health care domains. © The Author 2017. Published by Oxford University Press on behalf of the American Medical Informatics Association.

NASA technology utilization applications. [transfer of medical sciences

Science.gov (United States)

1973-01-01

The work is reported from September 1972 through August 1973 by the Technology Applications Group of the Science Communication Division (SCD), formerly the Biological Sciences Communication Project (BSCP) in the Department of Medical and Public Affairs of the George Washington University. The work was supportive of many aspects of the NASA Technology Utilization program but in particular those dealing with Biomedical and Technology Application Teams, Applications Engineering projects, new technology reporting and documentation and transfer activities. Of particular interest are detailed reports on the progress of various hardware projects, and suggestions and criteria for the evaluation of candidate hardware projects. Finally some observations about the future expansion of the TU program are offered.

A database application for the Naval Command Physical Readiness Testing Program

OpenAIRE

Quinones, Frances M.

1998-01-01

Approved for public release; distribution is unlimited 1T21 envisions a Navy with tandardized, state-of-art computer systems. Based on this vision, Naval database management systems will also need to become standardized among Naval commands. Today most commercial off the shelf (COTS) database management systems provide a graphical user interface. Among the many Naval database systems currently in use, the Navy's Physical Readiness Program database has continued to exist at the command leve...

CDC/NACCHO Accreditation Support Initiative: advancing readiness for local and tribal health department accreditation.

Science.gov (United States)

Monteiro, Erinn; Fisher, Jessica Solomon; Daub, Teresa; Zamperetti, Michelle Chuk

2014-01-01

Health departments have various unique needs that must be addressed in preparing for national accreditation. These needs require time and resources, shortages that many health departments face. The Accreditation Support Initiative's goal was to test the assumption that even small amounts of dedicated funding can help health departments make important progress in their readiness to apply for and achieve accreditation. Participating sites' scopes of work were unique to the needs of each site and based on the proposed activities outlined in their applications. Deliverables and various sources of data were collected from sites throughout the project period (December 2011-May 2012). Awardees included 1 tribal and 12 local health departments, as well as 5 organizations supporting the readiness of local and tribal health departments. Sites dedicated their funding toward staff time, accreditation fees, completion of documentation, and other accreditation readiness needs and produced a number of deliverables and example documents. All sites indicated that they made accreditation readiness gains that would not have occurred without this funding. Preliminary evaluation data from the first year of the Accreditation Support Initiative indicate that flexible funding arrangements may be an effective way to increase health departments' accreditation readiness.

Partnership readiness for community-based participatory research.

Science.gov (United States)

Andrews, Jeannette O; Newman, Susan D; Meadows, Otha; Cox, Melissa J; Bunting, Shelia

2012-08-01

The use of a dyadic lens to assess and leverage academic and community partners' readiness to conduct community-based participatory research (CBPR) has not been systematically investigated. With a lack of readiness to conduct CBPR, the partnership and its products are vulnerable. The purpose of this qualitative study was to explore the dimensions and key indicators necessary for academic and community partnership readiness to conduct CBPR. Key informant interviews and focus groups (n = 36 participants) were conducted with academic and community participants who had experiences with CBPR partnerships. A 'framework analysis' approach was used to analyze the data and generate a new model, CBPR Partnership Readiness Model. Antecedents of CBPR partnership readiness are a catalyst and mutual interest. The major dimensions of the CBPR Partnership Readiness Model are (i) goodness of fit, (ii) capacity, and (iii) operations. Preferred outcomes are sustainable partnership and product, mutual growth, policy and social and health impact on the community. CBPR partnership readiness is an iterative and dynamic process, partnership and issue specific, influenced by a range of environmental and contextual factors, amenable to change and essential for sustainability and promotion of health and social change in the community.

Further applications for mosaic pixel FPA technology

Science.gov (United States)

Liddiard, Kevin C.

2011-06-01

In previous papers to this SPIE forum the development of novel technology for next generation PIR security sensors has been described. This technology combines the mosaic pixel FPA concept with low cost optics and purpose-designed readout electronics to provide a higher performance and affordable alternative to current PIR sensor technology, including an imaging capability. Progressive development has resulted in increased performance and transition from conventional microbolometer fabrication to manufacture on 8 or 12 inch CMOS/MEMS fabrication lines. A number of spin-off applications have been identified. In this paper two specific applications are highlighted: high performance imaging IRFPA design and forest fire detection. The former involves optional design for small pixel high performance imaging. The latter involves cheap expendable sensors which can detect approaching fire fronts and send alarms with positional data via mobile phone or satellite link. We also introduce to this SPIE forum the application of microbolometer IR sensor technology to IoT, the Internet of Things.

Cloud-Based Speech Technology for Assistive Technology Applications (CloudCAST).

Science.gov (United States)

Cunningham, Stuart; Green, Phil; Christensen, Heidi; Atria, José Joaquín; Coy, André; Malavasi, Massimiliano; Desideri, Lorenzo; Rudzicz, Frank

2017-01-01

The CloudCAST platform provides a series of speech recognition services that can be integrated into assistive technology applications. The platform and the services provided by the public API are described. Several exemplar applications have been developed to demonstrate the platform to potential developers and users.

UTILITY ADVANCED TURBINE SYSTEMS (ATS) TECHNOLOGY READINESS TESTING

Energy Technology Data Exchange (ETDEWEB)

Unknown

1999-04-01

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the U.S. Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed, including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer conflation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially by GE. This change has resulted from DOE's request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include full speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. The objective of this task is to design 7H and 9H compressor rotor and stator structures with the goal of achieving high efficiency at lower cost and greater durability by applying proven GE Power Systems (GEPS) heavy-duty use design practices. The designs will be based on the GE Aircraft Engines (GEAE) CF6-80C2 compressor. Transient and steady-state thermo-mechanical stress analyses will be run to ensure compliance with GEPS life standards. Drawings will be prepared for forgings, castings, machining, and instrumentation for full speed, no load (FSNL) tests of the first unit on both 9H and 7H applications.

Emerging memory technologies design, architecture, and applications

CERN Document Server

2014-01-01

This book explores the design implications of emerging, non-volatile memory (NVM) technologies on future computer memory hierarchy architecture designs. Since NVM technologies combine the speed of SRAM, the density of DRAM, and the non-volatility of Flash memory, they are very attractive as the basis for future universal memories. This book provides a holistic perspective on the topic, covering modeling, design, architecture and applications. The practical information included in this book will enable designers to exploit emerging memory technologies to improve significantly the performance/power/reliability of future, mainstream integrated circuits. • Provides a comprehensive reference on designing modern circuits with emerging, non-volatile memory technologies, such as MRAM and PCRAM; • Explores new design opportunities offered by emerging memory technologies, from a holistic perspective; • Describes topics in technology, modeling, architecture and applications; • Enables circuit designers to ex...

JPL Robotics Technology Applicable to Agriculture

Science.gov (United States)

Udomkesmalee, Suraphol Gabriel; Kyte, L.

2008-01-01

This slide presentation describes several technologies that are developed for robotics that are applicable for agriculture. The technologies discussed are detection of humans to allow safe operations of autonomous vehicles, and vision guided robotic techniques for shoot selection, separation and transfer to growth media,

Decision Gate Process for Assessment of a Technology Development Portfolio

Science.gov (United States)

Kohli, Rajiv; Fishman, Julianna; Hyatt, Mark

2012-01-01

The NASA Dust Management Project (DMP) was established to provide technologies (to TRL 6 development level) required to address adverse effects of lunar dust to humans and to exploration systems and equipment, which will reduce life cycle cost and risk, and will increase the probability of sustainable and successful lunar missions. The technology portfolio of DMP consisted of different categories of technologies whose final product is either a technology solution in itself, or one that contributes toward a dust mitigation strategy for a particular application. A Decision Gate Process (DGP) was developed to assess and validate the achievement and priority of the dust mitigation technologies as the technologies progress through the development cycle. The DGP was part of continuous technology assessment and was a critical element of DMP risk management. At the core of the process were technology-specific criteria developed to measure the success of each DMP technology in attaining the technology readiness levels assigned to each decision gate. The DGP accounts for both categories of technologies and qualifies the technology progression from technology development tasks to application areas. The process provided opportunities to validate performance, as well as to identify non-performance in time to adjust resources and direction. This paper describes the overall philosophy of the DGP and the methodology for implementation for DMP, and describes the method for defining the technology evaluation criteria. The process is illustrated by example of an application to a specific DMP technology.

Industrial scale application of irradiation technologies in Turkey

International Nuclear Information System (INIS)

Siyakus, G.

2001-01-01

Sufficient and safer foods, better health care, cleaner environment and higher life standards are the shared objectives and desires of the humankind. The rapid increase in the world population necessitates the development and application of new technologies in order to meet these desires. The need for such technologies is more important for developing countries, when it is thought that the major share of the population increase is originating from that regions. Irradiation technology, as a rather new one, may have a considerable contribution in this respect, providing that proper application . Although, a wide range of application areas, changing from flue gas treatment to polymer production, exists in this respect, transferring or developing new technologies requires time, trained personnel and equipment

Industrial applications of sol-gel technology

International Nuclear Information System (INIS)

Tuloch, S.M.; Tulloch, G.E.

1995-01-01

The purpose of this paper has been to provide a broad, rather than comprehensive view. We have presented a range of applications and only a selection of involved companies and researchers and have relied to a large extent on published information. Nevertheless, we are sure that our view of the importance of Sol-gel technology as an emerging technology, with enormous impact across a wide range of manufacturing, is demonstrated. Applications which are either in production or have been foreshadowed include four broad categories: coatings, fibres, powders and monoliths

Development of advanced Czochralski Growth Process to produce low cost 150 KG silicon ingots from a single crucible for technology readiness

Science.gov (United States)

1981-01-01

The goals in this program for advanced czochralski growth process to produce low cost 150 kg silicon ingots from a single crucible for technology readiness are outlined. To provide a modified CG2000 crystal power capable of pulling a minimum of five crystals, each of approximately 30 kg in weight, 150 mm diameter from a single crucible with periodic melt replenishment. Crystals to have: resistivity of 1 to 3 ohm cm, p-type; dislocation density below 1- to the 6th power per cm; orientation (100); after growth yield of greater than 90%. Growth throughput of greater than 2.5 kg per hour of machine operation using a radiation shield. Prototype equipment suitable for use as a production facility. The overall cost goal is $.70 per peak watt by 1986. To accomplish these goals, the modified CG2000 grower and development program includes: (1) increased automation with a microprocessor based control system; (2) sensors development which will increase the capability of the automatic controls system, and provide technology transfer of the developed systems.

Determining transition readiness in congenital heart disease: Assessing the utility of the Transition Readiness Questionnaire

Science.gov (United States)

The Transition Readiness Assessment Questionnaire (TRAQ) is a tool commonly used to assess transition readiness in adolescents with chronic diseases. It was previously validated in youth with special health care needs (YSHCN), but no patients with congenital heart disease (CHD) were included in the ...

Measuring readiness for and satisfaction with a hand hygiene e-learning course among healthcare workers in a paediatric oncology centre in Guatemala City.

Science.gov (United States)

Gonzalez, Miriam L; Melgar, Mario; Homsi, Maysam; Shuler, Ana; Antillon-Klussmann, Federico; Matheu, Laura; Ramirez, Marylin; Grant, Michael M; Lowther, Deborah L; Relyea, George; Caniza, Miguela A

2016-01-01

E-learning has been widely used in the infection control field and has been recommended for use in hand hygiene (HH) programs by the World Health Organization. Such strategies are effective and efficient for infection control, but factors such as learner readiness for this method should be determined to assure feasibility and suitability in low- to middle-income countries. We developed a tailored, e-learning, Spanish-language HH course based on the WHO guidelines for HH in healthcare settings for the pediatric cancer center in Guatemala City. We aimed to identify e-readiness factors that influenced HH course completion and evaluate HCWs' satisfaction. Pearson's chi-square test of independence was used to retrospectively compare e-readiness factors and course-completion status (completed, non-completed, and never-started). We surveyed 194 HCWs for e-readiness; 116 HCWs self-enrolled in the HH course, and 55 responded to the satisfaction survey. Most e-readiness factors were statistically significant between course-completion groups. Moreover, students were significantly more likely to complete the course if they had a computer with an Internet connection (P=0.001) and self-reported comfort with using a computer several times a week (p=0.001) and communicating through online technologies (p=0.001). Previous online course experience was not a significant factor (p=0.819). E-readiness score averages varied among HCWs, and mean scores for all e-readiness factors were significantly higher among medical doctors than among nurses. Nearly all respondents to the satisfaction survey agreed that e-learning was as effective as the traditional teaching method. Evaluating HCWs' e-readiness is essential while integrating technologies into educational programs in low- to middle-income countries.

ISV technology development plan for buried waste

International Nuclear Information System (INIS)

Nickelson, D.F.; Callow, R.A.; Luey, J.K.

1992-07-01

This report identifies the main technical issues facing the in situ vitrification (ISV) application to buried waste, and presents a plan showing the top-level schedule and projected resources needed to develop and demonstrate the technology for meeting Environmental Restoration Department (ERD) needs. The plan also proposes a model strategy for the technology transfer from the Department of Energy's Office of Technology Development (DOE-OTD) to the Office of Environmental Restoration (DOE-ER) as the technology proceeds from issues resolution (development) to demonstration and remedial readiness. Implementation of the plan would require $34,91 1K in total funding to be spread in the years FY-93 through FY-98. Of this amount, $10,183K is planned to be funded by DOE-OTD through the ISV Integrated Program. The remaining amount, $24,728K, is recommended to be split between the Department of Energy (DOE) Office of Technology Development ($6,670K) and DOE Office of Environmental Restoration ($18,058K)

Technological and industrial applications of neutrons

International Nuclear Information System (INIS)

Weitkamp, C.

1976-07-01

Technological and industrial applications of neutrons are reviewed except applications in power generation, biology and medicine, and solid-state research. Techniques are grouped in three main categories: isotope production, material testing, and material analysis. Following a brief description of the different methods, an attempt is made to assess their applicability and to point out current developments. (orig.) [de

Technological and industrial applications of neutrons

International Nuclear Information System (INIS)

Weitkamp, C.

1977-01-01

Technological and industrial applications of neutrons are reviewed except applications in power generation, biology and medicine, and solid-state research. Techniques are grouped in three main catagories: material production, material testing, and material analysis. Following a brief description of the different methods, an attempt is made to assess their applicability and to point out current developments. (author)

An Investigation to Advance the Technology Readiness Level of the Centaur Derived On-orbit Propellant Storage and Transfer System

Science.gov (United States)

Silvernail, Nathan L.

This research was carried out in collaboration with the United Launch Alliance (ULA), to advance an innovative Centaur-based on-orbit propellant storage and transfer system that takes advantage of rotational settling to simplify Fluid Management (FM), specifically enabling settled fluid transfer between two tanks and settled pressure control. This research consists of two specific objectives: (1) technique and process validation and (2) computational model development. In order to raise the Technology Readiness Level (TRL) of this technology, the corresponding FM techniques and processes must be validated in a series of experimental tests, including: laboratory/ground testing, microgravity flight testing, suborbital flight testing, and orbital testing. Researchers from Embry-Riddle Aeronautical University (ERAU) have joined with the Massachusetts Institute of Technology (MIT) Synchronized Position Hold Engage and Reorient Experimental Satellites (SPHERES) team to develop a prototype FM system for operations aboard the International Space Station (ISS). Testing of the integrated system in a representative environment will raise the FM system to TRL 6. The tests will demonstrate the FM system and provide unique data pertaining to the vehicle's rotational dynamics while undergoing fluid transfer operations. These data sets provide insight into the behavior and physical tendencies of the on-orbit refueling system. Furthermore, they provide a baseline for comparison against the data produced by various computational models; thus verifying the accuracy of the models output and validating the modeling approach. Once these preliminary models have been validated, the parameters defined by them will provide the basis of development for accurate simulations of full scale, on-orbit systems. The completion of this project and the models being developed will accelerate the commercialization of on-orbit propellant storage and transfer technologies as well as all in

VLSI micro- and nanophotonics science, technology, and applications

CERN Document Server

Lee, El-Hang; Razeghi, Manijeh; Jagadish, Chennupati

2011-01-01

Addressing the growing demand for larger capacity in information technology, VLSI Micro- and Nanophotonics: Science, Technology, and Applications explores issues of science and technology of micro/nano-scale photonics and integration for broad-scale and chip-scale Very Large Scale Integration photonics. This book is a game-changer in the sense that it is quite possibly the first to focus on ""VLSI Photonics"". Very little effort has been made to develop integration technologies for micro/nanoscale photonic devices and applications, so this reference is an important and necessary early-stage pe

Measures for Assessing the Readiness of Back-office Staff

Directory of Open Access Journals (Sweden)

Devender Maheshwari

2013-02-01

Full Text Available Purpose—Public organizations deploy state-of-the-art technological advancements to facilitate sophisticated services to the citizens, businesses, and employees. The maturity of backoffice staff to adapt, use, and utilize these technological changes at the organizational level is a prerequisite to introduce cutting-edge services. This paper investigates the maturity of backoffice staff and proposes a conceptual framework, measurement constructs, and subsequent measures for the assessment. Methodology/Design/Research—Design methodology focuses on combining research with practice. An initial framework and measurement constructs are developed based on the literature review, which are further investigated by conducting a case study at Inland Revenue, Karachi to test the usability in practice using the directive content analysis qualitative method. Findings—the outcome of measurement reveals that though the proposed framework and measurement constructs i.e. roles; responsibilities; trainings; capacity building; capabilities; and attitude are relevant and useful to assess the back-office staff readiness, the measures to assess the constructs may vary in practice depending on the size, scope, and type of the public organizations. Research limitations/implications—although the proposed measurement constructs and measures proved to be useful for assessing the back-office staff maturity, the relationships among different measures and constructs affecting the staff readiness require further research. Practical implications—the case study was conducted at single public organization, which will be extended to multiple public organizations in practice. The extension will not to allow effective testing of the usability of the proposed conceptual framework and constructs, but will also broaden the benchmarking scope. Originality/Value—back-office staff education is discussed and described in the literature as well practice, but there is hardly any

Measures for Assessing the Readiness of Back-office Staff

Directory of Open Access Journals (Sweden)

Devender Maheshwari

2012-12-01

Full Text Available Purpose—Public organizations deploy state-of-the-art technological advancements to facilitate sophisticated services to the citizens, businesses, and employees. The maturity of backoffice staff to adapt, use, and utilize these technological changes at the organizational level is a prerequisite to introduce cutting-edge services. This paper investigates the maturity of backoffice staff and proposes a conceptual framework, measurement constructs, and subsequent measures for the assessment.Methodology/Design/Research—Design methodology focuses on combining research with practice. An initial framework and measurement constructs are developed based on the literature review, which are further investigated by conducting a case study at Inland Revenue, Karachi to test the usability in practice using the directive content analysis qualitative method.Findings—the outcome of measurement reveals that though the proposed framework and measurement constructs i.e. roles; responsibilities; trainings; capacity building; capabilities; and attitude are relevant and useful to assess the back-office staff readiness, the measures to assess the constructs may vary in practice depending on the size, scope, and type of the public organizations.Research limitations/implications—although the proposed measurement constructs and measures proved to be useful for assessing the back-office staff maturity, the relationships among different measures and constructs affecting the staff readiness require further research.Practical implications—the case study was conducted at single public organization, which will be extended to multiple public organizations in practice. The extension will not to allow effective testing of the usability of the proposed conceptual framework and constructs, but will also broaden the benchmarking scope.Originality/Value—back-office staff education is discussed and described in the literature as well practice, but there is hardly any

The novel cloud application technology with virtual platform

Directory of Open Access Journals (Sweden)

Chen Ying-Chuan

2018-01-01

Full Text Available Virtualization technology of cloud application service is the major research issue in recent years. Our virtual platform can obtain a lot of advantages base on virtualization technology with suitable virtual machine solution that all system resources can deployed quickly and managed competently, and it has some features including the high capacity for reliability, elasticity and customization. In our virtual platform, there are many different application services are provided for cloud service style. For system computing resources, we need to share all of system and software resources using the virtualization technology is presented in related sections, and we proposed virtual and remote application technology to implement innovative, convenient and powerful cloud application service base on virtual platform. For users of our platform, they can easy to use any software and tools on demand with pay per use mode anytime, and they do not have specialized knowledge and ability of install and maintenance.

Application of membrane technologies for liquid radioactive waste processing

International Nuclear Information System (INIS)

2004-01-01

Membrane separation processes have made impressive progress since the first synthesis of membranes almost 40 years ago. This progress was driven by strong technological needs and commercial expectations. As a result the range of successful applications of membranes and membrane processes is continuously broadening. In addition, increasing application of membrane processes and technologies lies in the increasing variations of the nature and characteristics of commercial membranes and membrane apparatus. The objective of the report is to review the information on application of membrane technologies in the processing of liquid radioactive waste. The report covers the various types of membranes, equipment design, range of applications, operational experience and the performance characteristics of different membrane processes. The report aims to provide Member States with basic information on the applicability and limitations of membrane separation technologies for processing liquid radioactive waste streams

ICT based training on nuclear technology applications in Tanzania

Energy Technology Data Exchange (ETDEWEB)

Mdoe, S.L. [Nuclear Technology Applications Directorate, Tanzania Atomic Energy Commission, P.O. Box 743, Arusha (Tanzania)]. E-mail: slcmdoe@yahoo.com; Kimaro, E. [Nuclear Technology Applications Directorate, Tanzania Atomic Energy Commission, P.O. Box 743, Arusha (Tanzania)]. E-mail: taec@habari.co.tz

2006-07-01

Peaceful application of nuclear technology has contributed to socio-economic resource development in Tanzania. The Tanzania Atomic Energy Commission has taken some active steps for the incorporation and or adoption of ICT-based training modules in nuclear science and technology and its applications. The overall objective of this programme is to establish a sustainable national capability for using the potential of information communication technologies (ICTs) for training and education in the field of nuclear science and technology. This paper reviews some of the experience which the authors gained in the area of ICT based training in nuclear technology applications, it describes some of the challenges experienced, and some proposals to address the issues involved. (author)

ICT based training on nuclear technology applications in Tanzania

International Nuclear Information System (INIS)

Mdoe, S.L.; Kimaro, E.

2006-01-01

Peaceful application of nuclear technology has contributed to socio-economic resource development in Tanzania. The Tanzania Atomic Energy Commission has taken some active steps for the incorporation and or adoption of ICT-based training modules in nuclear science and technology and its applications. The overall objective of this programme is to establish a sustainable national capability for using the potential of information communication technologies (ICTs) for training and education in the field of nuclear science and technology. This paper reviews some of the experience which the authors gained in the area of ICT based training in nuclear technology applications, it describes some of the challenges experienced, and some proposals to address the issues involved. (author)

NASA LWS Institute GIC Working Group: GIC science, engineering and applications readiness

Science.gov (United States)

Pulkkinen, A. A.; Thomson, A. W. P.; Bernabeu, E.

2016-12-01

the ultimate goal of our GIC work and thus in assessing the status of the field, we specifically will quantify the readiness of various applications in the GIC effects mitigation context.

Readiness for Training Disabled Students in Academic Staff of Universities

Directory of Open Access Journals (Sweden)

Sorokin N.Y.,

2018-05-01

Full Text Available The readiness of the teaching staff of higher educational institutions for teaching and psychological and pedagogical support of students with disabilities is being considered. We emphasize that the personnel of the educational organization need special competence to work with persons with disabilities of various nosological groups. The issues of creating an accessible environment in the university were studied, the readiness of teachers to apply special educational technologies in the training of students with disabilities, to develop teaching and methodological materials; the ability to establish pedagogically appropriate relationships with students, and provide psychological and pedagogical support in matters of personal and professional self-determination. The results show a high degree of importance of special professional competencies for inclusive education. But, at the same time, teachers assess their own level of preparedness with students with disabilities as insufficient, which allowed to determine the main areas of work.

Technological assessment of local manufacturers for wind turbine blade manufacturing in Pakistan

Science.gov (United States)

Mahmood, Khurram; Haroon, General

2012-11-01

Composite materials manufacturing industry is one of the world's hi-tech industry. Manufacturing of wind turbine blades is one of the specialized fields requiring high degree of precision and composite manufacturing techniques. This paper identifies the industries specializing in the composite manufacturing and is able to manufacture wind turbines blades in Pakistan. In the second phase, their technology readiness level is determined, based on some factors and then a readiness level are assigned to them. The assigned technology readiness level will depict the absorptive capacity of each manufacturing unit and its capability to take on such projects. The individual readiness level of manufacturing unit will then be used to establish combined technology readiness level of Pakistan particularly for wind turbine blades manufacturing. The composite manufacturing industry provides many spin offs and a diverse range of products can be manufactured using this facility. This research will be helpful to categorize the strong points and flaws of local industry for the gap analysis. It can also be used as a prerequisite study before the evaluation of technologies and specialties to improve the industry of the country for the most favorable results. This will form a basic data base which can be used for the decision making related to transfer of technology, training of local skilled workers and general up-gradation of the local manufacturing units.

Starting school healthy and ready to learn: using social indicators to improve school readiness in Los Angeles County.

Science.gov (United States)

Wold, Cheryl; Nicholas, Will

2007-10-01

School readiness is an important public health outcome, determined by a set of interdependent health and developmental trajectories and influenced by a child's family, school, and community environments. The same factors that influence school readiness also influence educational success and health throughout life. A California cigarette tax ballot initiative (Proposition 10) created new resources for children aged 0 to 5 years and their families statewide through county-level First 5 commissions, including First 5 LA in Los Angeles County. An opportunity to define and promote school readiness indicators was facilitated by collaborative relationships with a strong emphasis on data among First 5 LA, the Children's Planning Council, and the Los Angeles County Public Health Department, and other child-serving organizations. A workgroup developed school readiness goals and indicators based on recommendations of the National Education Goals Panel and five key domains of child well-being: 1) good health, 2) safety and survival, 3) economic well-being, 4) social and emotional well-being, and 5) education/workforce readiness. The Los Angeles County Board of Supervisors and First 5 LA Commission adopted the school readiness indicators. First 5 LA incorporated the indicators into the results-based accountability framework for its strategic plan and developed a community-oriented report designed to educate and spur school readiness-oriented action. The Los Angeles County Board of Supervisors approved a countywide consensus-building plan designed to engage key stakeholders in the use of the indicators for planning, evaluation, and community-building activities. School readiness indicators in Los Angeles County represent an important step forward for public health practice, namely, the successful blending of an expanded role for assessment with the ecological model.

The Readiness Ruler as a measure of readiness to change poly-drug use in drug abusers

DEFF Research Database (Denmark)

Hesse, Morten

2006-01-01

Readiness to change is a crucial issue in the treatment of substance use disorders. Experiences with methadone maintenance treatment (MMT) has shown that continuous drug and alcohol use with all its consequences characterize most MMT programs. In a prospective study of drug abusers seeking opiate...... agonist maintenance treatment in the City of Copenhagen, subjects were administered the Addiction Severity Index, and the Readiness Ruler for each of 11 different licit and illicit drugs by research technicians. Data was collected upon admission to the program and at a 18 month follow-up. Subjects who...... indicated they wanted to quit or cut down upon admission, reported less drug use at 18 month follow-up, after controlling for severity of drug problems at intake. Subjects who expressed readiness to change their drug use upon admission decreased their drug use. It is concluded that the Readiness Ruler...

The application of persuasive technology to educational settings

DEFF Research Database (Denmark)

Mintz, Joseph; Aagaard, Morten

2012-01-01

in the domain of health promotion. We present a mainly theoretical consideration of how persuasive technology could be used in educational contexts, particularly in school settings. We consider how persuasive technology design may need to be modified to meet the needs of complex educational settings. We propose......Persuasive technology is a sub-discipline of Human–Computer Interaction that has emerged within the last 10 years, and which has generated increasing interest in the application of persuasion to systems design. Most applications have to date been developed in commercial contexts, as well...... four design principles for the use of persuasive technology in instructional design, including credibility and Kairos. We derive these from theoretical considerations, as well as from our experience with the HANDS project, which has developed a mobile persuasive application for positive behaviour...

Research on Digital Forensic Readiness Design in a Cloud Computing-Based Smart Work Environment

Directory of Open Access Journals (Sweden)

Sangho Park

2018-04-01

Full Text Available Recently, the work environments of organizations have been in the process of transitioning into smart work environments by applying cloud computing technology in the existing work environment. The smart work environment has the characteristic of being able to access information assets inside the company from outside the company through cloud computing technology, share information without restrictions on location by using mobile terminals, and provide a work environment where work can be conducted effectively in various locations and mobile environments. Thus, in the cloud computing-based smart work environment, changes are occurring in terms of security risks, such as an increase in the leakage risk of an organization’s information assets through mobile terminals which have a high risk of loss and theft and increase the hacking risk of wireless networks in mobile environments. According to these changes in security risk, the reactive digital forensic method, which investigates digital evidence after the occurrence of security incidents, appears to have a limit which has led to a rise in the necessity of proactive digital forensic approaches wherein security incidents can be addressed preemptively. Accordingly, in this research, we design a digital forensic readiness model at the level of preemptive prevention by considering changes in the cloud computing-based smart work environment. Firstly, we investigate previous research related to the cloud computing-based smart work environment and digital forensic readiness and analyze a total of 50 components of digital forensic readiness. In addition, through the analysis of the corresponding preceding research, we design seven detailed areas, namely, outside the organization environment, within the organization guideline, system information, terminal information, user information, usage information, and additional function. Then, we design a draft of the digital forensic readiness model in the cloud

Analysis and evaluation of the applicability of green energy technology

Science.gov (United States)

Xu, Z. J.; Song, Y. K.

2017-11-01

With the seriousness of environmental issues and the shortage of resources, the applicability of green energy technology has been paid more and more attention by scholars in different fields. However, the current researches are often single in perspective and simple in method. According to the Theory of Applicable Technology, this paper analyzes and defines the green energy technology and its applicability from the all-around perspectives of symbiosis of economy, society, environment and science & technology etc., and correspondingly constructs the evaluation index system. The paper further applies the Fuzzy Comprehensive Evaluation to the evaluation of its applicability, discusses in depth the evaluation models and methods, and explains in detail with an example. The author holds that the applicability of green energy technology involves many aspects of economy, society, environment and science & technology and can be evaluated comprehensively by an index system composed of a number of independent indexes. The evaluation is multi-object, multi-factor, multi-level and fuzzy comprehensive, which is undoubtedly correct, effective and feasible by the Fuzzy Comprehensive Evaluation. It is of vital theoretical and practical significance to understand and evaluate comprehensively the applicability of green energy technology for the rational development and utilization of green energy technology and for the better promotion of sustainable development of human and nature.

Achieving year 2000 readiness: basic processes

International Nuclear Information System (INIS)

1999-03-01

This document provides an approach or addressing safety and operability concerns related to Year 2000 (Y2K). Although it was prepared for nuclear power plants the methods described are applicable to other nuclear installations and to other industrial concerns. The basic goal was to provide a brief but comprehensive approach that may be used to discover, understand and correct the Y2K related problems. The document relies on certain basic expectations of the facility that would apply to any programme: ownership, management, knowledgeable participants, thorough application of the approach, documentation of efforts, quality assurance of products and compliance with all regulatory requirements. The IAEA has and will continue to be involved with Member States to assist them in implementing this document and achieving Y2K Readiness

Achieving year 2000 readiness: basic processes

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

This document provides an approach or addressing safety and operability concerns related to Year 2000 (Y2K). Although it was prepared for nuclear power plants the methods described are applicable to other nuclear installations and to other industrial concerns. The basic goal was to provide a brief but comprehensive approach that may be used to discover, understand and correct the Y2K related problems. The document relies on certain basic expectations of the facility that would apply to any programme: ownership, management, knowledgeable participants, thorough application of the approach, documentation of efforts, quality assurance of products and compliance with all regulatory requirements. The IAEA has and will continue to be involved with Member States to assist them in implementing this document and achieving Y2K Readiness 12 refs, 3 figs

Mobile Data Technology for Small Businesses: needs, uses and adoption

Directory of Open Access Journals (Sweden)

Debra Harker

2002-05-01

Full Text Available The technological environment in which Australian SMEs operate can be best described as dynamic and vital. The rate of technological change provides the SME owner/manger a complex and challenging operational context. Wireless applications are being developed that provide mobile devices with Internet content and E-business services. In Australia, the adoption of commerce by large organisations has been relatively high, however, the same cannot be said for SMEs, where adoption has been slower than other developed countries. In contrast, however, mobile telephone adoption and diffusion is relatively high by SMEs. Will SMEs who have been reluctant to adopt ecommerce technologies in the past be more ready to go on-line with the merging of the Internet and mobile data technologies? This exploratory study identifies attitudes, perceptions and issues for mobile data technologies by regional SME owner/managers across a range of industry sectors. The major issues include the sector the firm belongs to, the current adoption status of the firm, the level of mistrust of the IT industry, the cost of the technologies, and the applications and attributes of the technologies.

Microwave mixer technology and applications

CERN Document Server

Henderson, Bert

2013-01-01

Although microwave mixers play a critical role in wireless communication and other microwave applications employing frequency conversion circuits, engineers find that most books on this subject emphasize theoretical aspects, rather than practical applications. That's about to change with the forthcoming release of Microwave Mixer Technology and Applications. Based on a review of over one thousand patents on mixers and frequency conversion, authors Bert Henderson and Edmar Camargo have written a comprehensive book for mixer designers who want solid ideas for solving their own design challenges.

Information Technology Applications to Maintenance Management

Institute of Scientific and Technical Information of China (English)

Abdul Raouf S.I.

2003-01-01

Application of IT (Information Technology) to equipment management have not been ade-quately made. A system using Benefit Evaluation Ladder is described for evaluating the need for IT ap-plications to maintenance management. A systematic evaluation scheme for Computerized Maintenance Management System (CMMS) is presented.

m-Health Policy Readiness and Enabling Factors: Comparisons of Sub-Saharan Africa and Organization for Economic Cooperation and Development Countries.

Science.gov (United States)

Lee, Seohyun; Begley, Charles E; Morgan, Robert; Chan, Wenyaw; Kim, Sun-Young

2018-02-12

As an innovative solution to poor access to care in low- and middle-income countries (LMICs), m-health has gained wide attention in the past decade. Despite enthusiasm from the global health community, LMICs have not demonstrated high uptake of m-health promoting policies or public investment. To benchmark the current status, this study compared m-health policy readiness scores between sub-Saharan Africa and high-income Organization for Economic Cooperation and Development (OECD) countries using an independent two-sample t test. In addition, the enabling factors associated with m-health policy readiness were investigated using an ordinal logistic regression model. The study was based on the m-health policy readiness scores of 112 countries obtained from the World Health Organization Third Global Survey on e-Health. The mean m-health policy readiness score for sub-Saharan Africa was statistically significantly lower than that for OECD countries (p = 0.02). The enabling factors significantly associated with m-health policy readiness included information and communication technology development index (odds ratio [OR] 1.57; 95% confidence interval [CI] 1.12-2.2), e-health education for health professionals (OR 4.43; 95% CI 1.60-12.27), and the location in sub-Saharan Africa (OR 3.47; 95% CI 1.06-11.34). The findings of our study suggest dual policy goals for m-health in sub-Saharan Africa. First, enhance technological and educational support for m-health. Second, pursue global collaboration for building m-health capacity led by sub-Saharan African countries with hands-on experience and knowledge. Globally, countries should take a systematic and collaborative approach in pursuing m-health policy with the focus on technological and educational support.

Nuclear Systems (NS): Technology Demonstration Unit (TDU)

Data.gov (United States)

National Aeronautics and Space Administration — The Nuclear Systems Project demonstrates nuclear power technology readiness to support the goals of NASA's Space Technology Mission Directorate. To this end, the...

Handbook of social network technologies and applications

CERN Document Server

Furht, Borko

2010-01-01

Social networking is a concept that has existed for a long time; however, with the explosion of the Internet, social networking has become a tool for people to connect and communicate in ways that were impossible in the past. The recent development of Web 2.0 has provided many new applications, such as Myspace, Facebook, and LinkedIn. The purpose of ""Handbook of Social Networks: Technologies and Applications"" is to provide comprehensive guidelines on the current and future trends in social network technologies and applications in the field of Web-based Social Networks. This handbook includes

Using Biowin, Bayes, and batteries to predict ready biodegradability.

Science.gov (United States)

Boethling, Robert S; Lynch, David G; Jaworska, Joanna S; Tunkel, Jay L; Thom, Gary C; Webb, Simon

2004-04-01

Whether or not a given chemical substance is readily biodegradable is an important piece of information in risk screening for both new and existing chemicals. Despite the relatively low cost of Organization for Economic Cooperation and Development tests, data are often unavailable and biodegradability must be estimated. In this paper, we focus on the predictive value of selected Biowin models and model batteries using Bayesian analysis. Posterior probabilities, calculated based on performance with the model training sets using Bayes' theorem, were closely matched by actual performance with an expanded set of 374 premanufacture notice (PMN) substances. Further analysis suggested that a simple battery consisting of Biowin3 (survey ultimate biodegradation model) and Biowin5 (Ministry of International Trade and Industry [MITI] linear model) would have enhanced predictive power in comparison to individual models. Application of the battery to PMN substances showed that performance matched expectation. This approach significantly reduced both false positives for ready biodegradability and the overall misclassification rate. Similar results were obtained for a set of 63 pharmaceuticals using a battery consisting of Biowin3 and Biowin6 (MITI nonlinear model). Biodegradation data for PMNs tested in multiple ready tests or both inherent and ready biodegradation tests yielded additional insights that may be useful in risk screening.

MAPPING POTENTIAL TECHNOLOGY APPROPRIATE SMALL AND MEDIUM ENTERPRISES AS EFFORTS TO IMPROVE TECHNOLOGY PREPARATION LEADERSHIP IN REGION OF PONOROGO

Directory of Open Access Journals (Sweden)

Rochmat Aldy Purnomo

2017-10-01

Full Text Available Research Objectives "Mapping the Potential of Appropriate Technology for Small and Medium Enterprises as an Effort to Improve the Capability of Technology Readiness in Ponorogo District" is to describe the profile of small and medium enterprises (SMEs, evaluate and measure the level of technological readiness ability (TK2T of SMEs in Ponorogo District. The analytical tool used is a technometer that serves to measure the level of technological readiness capability used for the production of SMEs divided into three stages, basic (level 1 to level 3, medium (level 4 to level 6 and ready (Level 7 to With Level 9. By using teknometer is expected to provide basic information about mapping the potential needs and the use of appropriate technology (TTG both tools, processes and production results in Ponorogo regency. SMEs in Ponorogo Regency are dominated in the field of food, handicraft and textile fields. The SME food business unit still requires major government intervention on production process issues. The majority of SMEs business unit in the field of food still use technology (tools simple and potluck. The production process of SMEs business still neglects the hygienic side of both the production and production. The results of the evaluation and measurement of SME TK2T in Ponorogo District indicate that all samples have passed measurements at level 1 to level 3. Less than 50% pass the middle level ie level 4 to level 6, while less than 10% have passed the top level measurement , Which is level 7 to level 9. This explains that the production of SMEs in Ponorogo Regency still need government intervention both in the use of appropriate technology, as well as supporting indicators such as management, hygiene in production, human resources.

Scientometric methods for identifying emerging technologies

Science.gov (United States)

Abercrombie, Robert K; Schlicher, Bob G; Sheldon, Frederick T

2015-11-03

Provided is a method of generating a scientometric model that tracks the emergence of an identified technology from initial discovery (via original scientific and conference literature), through critical discoveries (via original scientific, conference literature and patents), transitioning through Technology Readiness Levels (TRLs) and ultimately on to commercial application. During the period of innovation and technology transfer, the impact of scholarly works, patents and on-line web news sources are identified. As trends develop, currency of citations, collaboration indicators, and on-line news patterns are identified. The combinations of four distinct and separate searchable on-line networked sources (i.e., scholarly publications and citation, worldwide patents, news archives, and on-line mapping networks) are assembled to become one collective network (a dataset for analysis of relations). This established network becomes the basis from which to quickly analyze the temporal flow of activity (searchable events) for the example subject domain.

Application of single-cell technology in cancer research.

Science.gov (United States)

Liang, Shao-Bo; Fu, Li-Wu

2017-07-01

In this review, we have outlined the application of single-cell technology in cancer research. Single-cell technology has made encouraging progress in recent years and now provides the means to detect rare cancer cells such as circulating tumor cells and cancer stem cells. We reveal how this technology has advanced the analysis of intratumor heterogeneity and tumor epigenetics, and guided individualized treatment strategies. The future prospects now are to bring single-cell technology into the clinical arena. We believe that the clinical application of single-cell technology will be beneficial in cancer diagnostics and treatment, and ultimately improve survival in cancer patients. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Medical and surgical applications of space biosensor technology

Science.gov (United States)

Hines, J. W.

1996-01-01

Researchers in space life sciences are rapidly approaching a technology impasse. Many of the critical questions on the impact of spaceflight on living systems simply cannot be answered with the limited available technologies. Research subjects, particularly small animal models like the rat, must be allowed to function relatively untended and unrestrained for long periods to fully reflect the impact of microgravity and spaceflight on their behavior and physiology. These requirements preclude the use of present hard-wired instrumentation techniques and limited data acquisition systems. Implantable sensors and miniaturized biotelemetry are the only means of capturing the fundamental and critical data. This same biosensor and biotelemetry technology has direct application to Earth-based medicine and surgery. Continuous, on-line data acquisition and improved measurement capabilities combined with the ease and flexibility offered by automated, wireless, and portable instruments and data systems, should provide a boon to the health care industry. Playing a key role in this technology revolution is the Sensors 2000! (S2K!) Program at NASA Ames Research Center. S2K!, in collaboration with space life sciences researchers and managers, provides an integrated capability for sensor technology development and applications, including advanced biosensor technology development, spaceflight hardware development, and technology transfer and commercialization. S2K! is presently collaborating on several spaceflight projects with dual-use medical applications. One prime example is a collaboration with the Fetal Treatment Center (FTC) at the University of California at San Francisco. The goal is to develop and apply implantable chemical sensor and biotelemetry technology to continuously monitor fetal patients during extra-uterine surgery, replacement into the womb, through birth and beyond. Once validated for ground use, the method will be transitioned to spaceflight applications to

Medical and surgical applications of space biosensor technology

Science.gov (United States)

Hines, John W.

1996-02-01

Researchers in space life sciences are rapidly approaching a technology impasse. Many of the critical questions on the impact of spaceflight on living systems simply cannot be answered with the limited available technologies. Research subjects, particularly small animal models like the rat, must be allowed to function relatively untended and unrestrained for long periods to fully reflect the impact of microgravity and spaceflight on their behavior and physiology. These requirements preclude the use of present hard-wired instrumentation techniques and limited data acquisition systems. Implantable sensors and miniaturized biotelemetry are the only means of capturing the fundamental and critical data. This same biosensor and biotelemetry technology has direct application to Earth-based medicine and surgery. Continuous, on-line data acquisition and improved measurement capabilities combined with the ease and flexibility offered by automated, wireless, and portable instruments and data systems, should provide a boon to the health care industry. Playing a key role in this technology revolution is the Sensors 2000! (S2K!) Program at NASA Ames Research Center. S2K!, in collaboration with space life sciences researchers and managers, provides an integrated capability for sensor technology development and applications, including advanced biosensor technology development, spaceflight hardware development, and technology transfer and commercialization. S2K! is presently collaborating on several spaceflight projects with dual-use medical applications. One prime example is a collaboration with the Fetal Treatment Center (FTC) at the University of California at San Francisco. The goal is to develop and apply implantable chemical sensor and biotelemetry technology to continuously monitor fetal patients during extra-uterine surgery, replacement into the womb, through birth and beyond. Once validated for ground use, the method will be transitioned to spaceflight applications to

Dimensions of community and organizational readiness for change.

Science.gov (United States)

Castañeda, Sheila F; Holscher, Jessica; Mumman, Manpreet K; Salgado, Hugo; Keir, Katherine B; Foster-Fishman, Pennie G; Talavera, Gregory A

2012-01-01

Readiness can influence whether health interventions are implemented in, and ultimately integrated into, communities. Although there is significant research interest in readiness and capacity for change, the measurement of these constructs is still in its infancy. The purpose of this review was to integrate existing assessment models of community and organizational readiness. The database PubMed was searched for articles; articles, book chapters, and practitioner guides identified as references cited in the list of core articles. Studies were included if they met the following criteria: (1) Empirical research, (2) identified community or organizational readiness for innovative health programming in the study's title, purpose, research questions, or hypotheses, and (3) identified methods to measure these constructs. Duplicate articles were deleted and measures published before 1995 were excluded. The search yielded 150 studies; 13 met all criteria. This article presents the results of a critical review of 13 community and organizational readiness assessment models, stemming from articles, chapters, and practitioner's guides focusing on assessing, developing, and sustaining community and organizational readiness for innovative public health programs. Readiness is multidimensional and different models place emphasis on different components of readiness, such as (1) community and organizational climate that facilitates change, (2) attitudes and current efforts toward prevention, (3) commitment to change, and (4) capacity to implement change. When initiating the program planning process, it is essential to assess these four domains of readiness to determine how they apply to the nuances across different communities. Thus, community-based participatory research (CBPR) partnerships, in efforts to focus on public health problems, may consider using readiness assessments as a tool for tailoring intervention efforts to the needs of the community.

Pathways to School Readiness: Executive Functioning Predicts Academic and Social-Emotional Aspects of School Readiness

Science.gov (United States)

Mann, Trisha D.; Hund, Alycia M.; Hesson-McInnis, Matthew S.; Roman, Zachary J.

2017-01-01

The current study specified the extent to which hot and cool aspects of executive functioning predicted academic and social-emotional indicators of school readiness. It was unique in focusing on positive aspects of social-emotional readiness, rather than problem behaviors. One hundred four 3-5-year-old children completed tasks measuring executive…

Laser application maintenance technologies for nuclear power plant

International Nuclear Information System (INIS)

Shima, Seishi; Sato, Kenji; Kobayashi, Masahiro; Sano, Yuji; Kimura, Seiichiro

2000-01-01

Several plants that were the first to be constructed in Japan have been operating for more than 20 years now, and preventive maintenance is therefore a matter of great importance. This paper summarizes the status of applied laser maintenance technologies both preventive and repair. Especially for the laser peening and laser de-sensitization treatment technology, field applications were also described in detail. In future, expansion of field application area on the preventive maintenance, repair and inspection technologies will be developed. (author)

KBTAC [Knowledge-Based Technology Application Center] - The EPRI [Electric Power Research Institute]-sponsored knowledge-based technology application center

International Nuclear Information System (INIS)

Meyer, W.; Wood, R.M.; Scherer, J.

1990-01-01

The Electric Power Research Institute (EPRI) has announced the establishment of the Knowledge-Based Technology Application Center (KBTAC), whose goal is to assist member utilities with expert system technology and applications. The center, established November 7, 1989, is located on the campus of Syracuse University, Syracuse, New York, and will be operated jointly by Kaman Sciences Corporation and the university. The mission of the KBTAC is to assist EPRI member utilities to develop, test, and transfer expert systems into nuclear power plant operations, maintenance, and administration

Predicting ready biodegradability of premanufacture notice chemicals.

Science.gov (United States)

Boethling, Robert S; Lynch, David G; Thom, Gary C

2003-04-01

Chemical substances other than pesticides, drugs, and food additives are regulated by the U.S. Environmental Protection Agency (U.S. EPA) under the Toxic Substances Control Act (TSCA), but the United States does not require that new substances be tested automatically for such critical properties as biodegradability. The resulting lack of submitted data has fostered the development of estimation methods, and the BioWIN models for predicting biodegradability from chemical structure have played a prominent role in premanufacture notice (PMN) review. Until now, validation efforts have used only the Japanese Ministry of International Trade and Industry (MITI) test data and have not included all models. To assess BioWIN performance with PMN substances, we assembled a database of PMNs for which ready biodegradation data had been submitted over the period 1995 through 2001. The 305 PMN structures are highly varied and pose major challenges to chemical property estimation. Despite the variability of ready biodegradation tests, the use of at least six different test methods, and widely varying quality of submitted data, accuracy of four of six BioWIN models (MITI linear, MITI nonlinear, survey ultimate, survey primary) was in the 80+% range for predicting ready biodegradability. Greater accuracy (>90%) can be achieved by using model estimates only when the four models agree (true for 3/4 of the PMNs). The BioWIN linear and nonlinear probability models did not perform as well even when classification criteria were optimized. The results suggest that the MITI and survey BioWIN models are suitable for use in screening-level applications.

Commercial applications of perfluorocarbon tracer (PFT) technology

International Nuclear Information System (INIS)

Dietz, R.N.

1991-06-01

Tracer technology can be successfully applied to many leak-checking and monitoring evaluations of operating systems (e.g., building HVACs), manufacturing processes and products (e.g., air conditioners), and subsurface components and systems (e.g., underground storage tanks). Perfluorocarbon tracer (PFT) technology is the most sensitive of all tracer technologies because the ambient background levels of the five (5) routinely-used PFTs are in the range of parts per 10 15 parts of air (i.e., parts per quadrillion-ppq) and this technology's instrumentation can measure down to those levels. The effectiveness of this technology is achieved both in terms of cost (very little PFT need to be used) and detectability; for example, very small leaks can be rapidly detected. The PFT compounds, which are environmentally and biologically safe to use, are commercially available as are the sampling and analysis instrumentation. This presentation concerns (1) the steps being taken to commercialize this technology, (2) new applications of processes currently under study, and (3) applications in areas of use that will be particularly beneficial to the environment. 21 refs., 2 figs., 2 tabs

Focused ion beam technology and ultimate applications

International Nuclear Information System (INIS)

Gierak, Jacques

2009-01-01

In this topical review, the potential of the focused ion beam (FIB) technology and ultimate applications are reviewed. After an introduction to the technology and to the operating principles of liquid metal ion sources (LMIS), of ion optics and instrument architectures, several applications are described and discussed. First, the application of FIB for microcircuit inspection, metrology and failure analysis is presented. Then, we introduce and illustrate some advanced patterning schemes we propose as next generation FIB processing examples. These patterning schemes are (i) local defect injection or smoothing in magnetic thin film direct patterning, (ii) functionalization of graphite substrates to guide organization of clusters, (iii) local and selective epitaxy of III–V semiconductor quantum dots and (iv) FIB patterned solid-state nanopores for biological molecules manipulation and analysis. We conclude this work by giving our vision of the future developments for FIB technology. (topical review)

Aerocapture Technology Development for Planetary Science - Update

Science.gov (United States)

Munk, Michelle M.

2006-01-01

Within NASA's Science Mission Directorate is a technological program dedicated to improving the cost, mass, and trip time of future scientific missions throughout the Solar System. The In-Space Propulsion Technology (ISPT) Program, established in 2001, is charged with advancing propulsion systems used in space from Technology Readiness Level (TRL) 3 to TRL6, and with planning activities leading to flight readiness. The program's content has changed considerably since inception, as the program has refocused its priorities. One of the technologies that has remained in the ISPT portfolio through these changes is Aerocapture. Aerocapture is the use of a planetary body's atmosphere to slow a vehicle from hyperbolic velocity to a low-energy orbit suitable for science. Prospective use of this technology has repeatedly shown huge mass savings for missions of interest in planetary exploration, at Titan, Neptune, Venus, and Mars. With launch vehicle costs rising, these savings could be the key to mission viability. This paper provides an update on the current state of the Aerocapture technology development effort, summarizes some recent key findings, and highlights hardware developments that are ready for application to Aerocapture vehicles and entry probes alike. Description of Investments: The Aerocapture technology area within the ISPT program has utilized the expertise around NASA to perform Phase A-level studies of future missions, to identify technology gaps that need to be filled to achieve flight readiness. A 2002 study of the Titan Explorer mission concept showed that the combination of Aerocapture and a Solar Electric Propulsion system could deliver a lander and orbiter to Titan in half the time and on a smaller, less expensive launch vehicle, compared to a mission using chemical propulsion for the interplanetary injection and orbit insertion. The study also identified no component technology breakthroughs necessary to implement Aerocapture on such a mission

SaludABLEOmaha: Improving Readiness to Address Obesity Through Healthy Lifestyle in a Midwestern Latino Community, 2011–2013

Science.gov (United States)

Frerichs, Leah; Brittin, Jeri; Robbins, Regina; Steenson, Sharalyn; Stewart, Catherine; Fisher, Christopher

2015-01-01

Background A community’s readiness for change is a precursor to the effective application of evidence-based practices for health promotion. Research is lacking regarding potential strategies to improve readiness to address obesity-related health issues in underserved communities. Community Context This case study describes SaludABLEOmaha, an initiative to increase readiness of residents in a Midwestern Latino community to address obesity and adopt healthy lifestyles. Methods SaludABLEOmaha emphasized 2 core approaches, youth activism and collaboration among public and private institutions, which we applied to planning and implementing tactics in support of 3 interconnected strategies: 1) social marketing and social media, 2) service learning in schools (ie, curricula that integrate hands-on community service with instruction and reflection), and 3) community and business engagement. Following the Community Readiness Model protocol (http://triethniccenter.colostate.edu/communityReadiness.htm), structured interviews were conducted with community leaders and analyzed before and 2.5 years after launch of the program. Outcome The community increased in readiness from stage 3 of the Community Readiness Model, “vague awareness,” at baseline to stage 5, “preparation,” at follow-up. Interpretation SaludABLEOmaha improved community readiness (eg, community knowledge, community climate), which probably contributed to the observed increase in readiness to address obesity through healthy lifestyle. Community mobilization approaches such as youth activism integrated with social marketing and social media tactics can improve community responsiveness to obesity prevention and diminish health disparities. PMID:25674679

Application of single-vial ready-for-use formulation of 111In- or 177Lu-labelled somatostatin analogs.

Science.gov (United States)

de Blois, Erik; Chan, Ho Sze; de Zanger, Rory; Konijnenberg, Mark; Breeman, Wouter A P

2014-02-01

For the sake of safety it would be desirable to store and transport the ready-for-use liquid formulation (diagnostics and therapeutics) of radiolabelled peptides. The use of ethanol, in combination with a mixture of gentisic- and ascorbic acid, has superior effects on stabilizing radiolabelled somatostatin analogs. As a consequence, (111)In- and (177)Lu-labelled somatostatin analogs can be stored and transported in a single-vial ready-for-use liquid formulation up to 7 days after radiolabelling. © 2013 Published by Elsevier Ltd.

Readiness review plan for the in situ vitrification demonstration of Seepage Pit 1 in Waste Area Grouping 7

International Nuclear Information System (INIS)

1995-05-01

A treatability study is planned that encompasses the application of in situ vitrification (ISV) to at least two segments of the Oak Ridge National Laboratory Seepage Pit I during the third quarter of fiscal year 1995. Before the treatability study can be initiated, the proposed activity must be subjected to an Operational Readiness Review (ORR). ORR is a structured methodology of determining readiness to proceed as outlined in Martin Marietta Energy Systems, Inc. (Energy Systems), Environmental Restoration Waste Management Procedure ER/C-P1610, which provides Energy Systems organizations assurance that the work to be performed is consistent with management's expectations and that the subject activity is ready to proceed safely. The readiness review plan provides details of the review plan overview and the scope of work to be performed. The plan also identifies individuals and position responsibilities for implementing the activity. The management appointed Readiness Review Board (RRB) has been identified. A Field Readiness Review Team (FRT), a management appointed multidisciplinary group, has been established (1) to evaluate the ISV treatability study, (2) to identify and assemble supporting objective evidences of the readiness to proceed, and (3) to assist the team leader in presenting the evidences to the RRB. A major component of RRB is the formulation of readiness review criteria months before the operation. A comprehensive readiness review tree (a positive logic tree) is included, which identifies the activities required for the development of the readiness criteria. The readiness review tree serves as a tool to prevent the omission of an item that could affect system performance. All deficiencies identified in the review will be determined as prestart findings and must be resolved before the project is permitted to proceed. The final approval of the readiness to proceed will be the decision of RRB

EDUCATIONAL INNOVATIONS: AXIOLOGICAL BASES OF MEGALOPOLIS YOUTH’S READINESS

Directory of Open Access Journals (Sweden)

Olga V. Kruzhkova

2015-01-01

Full Text Available The purpose of the present article is to examine the value bases of the readiness for innovations in the modern education of the youth of the megalopolises.Methods. As the methods were used: theoretical analysis and modeling method, as well as a survey of students of megalopolises (n = 1187 by the valuable questionnaire of S. Schwartz.Results. The authors give the description of educational innovations from the perspective of the overall needs of society in an individual which has technological skills and targets in acquiring and operating information. The reorientation of education on advancing development is implemented through numerous tactical and strategic changes in its form, content, methods and structure of the educational system in general. These changes can be united into five groups. Organizational innovations are pointed at changing the structure of education in accordance with the dynamic characteristics of society. Informative innovations suggest differentiation of activities and the level of responsibility of professionals in the same profile. The activity innovations are focused on changing the teachers’ readiness to transform their professional work and the development of their innovative competence. Productive innovations solve the problem of personality development of a professional in accordance with the social mandate. Socio-control innovations are designed to achieve transparency of management education for society. Implementation of the considered innovations is provided by numerous factors, which includes readiness of students to participate in the latest developments of the educational environment. The basis of this readiness contains value orientations, actualizing expectations and targets of young people as participants of innovations. Value priorities of megalopolis youth are highlighted: independence of thoughts and actions, hedonism, reputation and goodwill. On the one hand, these values provide a high readiness

Food Applications and Regulation

Science.gov (United States)

Gálvez, Antonio; Abriouel, Hikmate; Omar, Nabil Ben; Lucas, Rosario

This chapter deals with food applications of bacteriocins. Regulatory issues on the different possibilities for incorporating bacteriocins as bioprotectants are discussed. Specific applications of bacteriocins or bacteriocin-producing strains are described for main food categories, including milk and dairy products, raw meats, ready-to-eat meat and poultry products, fermented meats, fish and fish products or fermented fish. The last section of the chapter deals with applications in foods and beverages derived from plant materials, such as raw vegetable foods, fruits and fruit juices, cooked food products, fermented vegetable foods and ­fermented beverages. Results obtained for application of bacteriocins in combination with other hurdles are also discussed for each specific case, with a special emphasis on novel food packaging and food-processing technologies, such as irradiation, pulsed electric field treatments or high hydrostatic pressure treatment.

Bridging the Technology Readiness "Valley of Death" Utilizing Nanosats

Science.gov (United States)

Bauer, Robert A.; Millar, Pamela S.; Norton, Charles D.

2015-01-01

Incorporating new technology is a hallmark of space missions. Missions demand ever-improving tools and techniques to allow them to meet the mission science requirements. In Earth Science, these technologies are normally expressed in new instrument capabilities that can enable new measurement concepts, extended capabilities of existing measurement techniques, or totally new detection capabilities, and also, information systems technologies that can enhance data analysis or enable new data analyses to advance modeling and prediction capabilities. Incorporating new technologies has never been easy. There is a large development step beyond demonstration in a laboratory or on an airborne platform to the eventual space environment that is sometimes referred to as the "technology valley of death." Studies have shown that non-validated technology is a primary cause of NASA and DoD mission delays and cost overruns. With the demise of the New Millennium Program within NASA, opportunities for demonstrating technologies in space have been rare. Many technologies are suitable for a flight project after only ground testing. However, some require validation in a relevant or a space flight environment, which cannot be fully tested on the ground or in airborne systems. NASA's Earth Science Technology Program has initiated a nimble program to provide a fairly rapid turn-around of space validated technologies, and thereby reducing future mission risk in incorporating new technologies. The program, called In-Space Validation of Earth Science Technology (InVEST), now has five tasks in development. Each are 3U CubeSats and they are targeted for launch opportunities in the 2016 time period. Prior to formalizing an InVEST program, the technology program office was asked to demonstrate how the program would work and what sort of technologies could benefit from space validation. Three projects were developed and launched, and have demonstrated the technologies that they set out to validate

Biomedical Optical Imaging Technologies Design and Applications

CERN Document Server

2013-01-01

This book provides an introduction to design of biomedical optical imaging technologies and their applications. The main topics include: fluorescence imaging, confocal imaging, micro-endoscope, polarization imaging, hyperspectral imaging, OCT imaging, multimodal imaging and spectroscopic systems. Each chapter is written by the world leaders of the respective fields, and will cover: principles and limitations of optical imaging technology, system design and practical implementation for one or two specific applications, including design guidelines, system configuration, optical design, component requirements and selection, system optimization and design examples, recent advances and applications in biomedical researches and clinical imaging. This book serves as a reference for students and researchers in optics and biomedical engineering.

E-learning readiness from perspectives of medical students: A survey in Nigeria.

Science.gov (United States)

Obi, I E; Charles-Okoli, A N; Agunwa, C C; Omotowo, B I; Ndu, A C; Agwu-Umahi, O R

2018-03-01

Learning in the medical school of the study university is still by the traditional face-to-face approach with minimal e-communication. This paper assesses student's perspectives of E-learning readiness, its predictors and presents a model for assessing them. A descriptive cross-sectional study of medical students. By proportional quota sampling 284 students responded to a semi-structured self-administered questionnaire adapted from literature. Ethical issues were given full consideration. Analysis was with SPSS version 20, using descriptive statistics, ANOVA, Spearman's correlation, and multiple regression. Statistical significance was considered at P E-learning (Mlr = 3.8 > Melr = 3.4), beyond reliance on the face-to-face approach (69.7%), expecting effective (51.1%), and quality improvement in their learning (73.1%). Having basic information and communications technology skills (68.9%) (Mict = 3.7 > Melr = 3.4), access to laptops (76.1%), ability to use web browsers confidently (91.8%) (Mwb = 4.3 > Melr = 3.4), with only few able to use asynchronous tools (45.5%), they consider content design important to attract users (75.6%), and agree they need training on E-learning content (71.4%). They however do not believe the university has enough information technology infrastructure (62.4%) (Mi = 2.7 E-learning. Predicted by their attitude, content, technological and cultural readiness. Further study with qualitative methodology will help in preparing for this evolution in learning.

First Responder Readiness: A Systems Approach to Readiness Assessment Using Model Based Vulnerability Analysis Techniques

Science.gov (United States)

2005-09-01

to come—if it be not to come, it will be now—if it be not now, yet it will come—the readiness is all. . .” --- Shakespeare , Hamlet , 5.2.215-219...BLANK 1 I. READINESS OVERVIEW A. INTRODUCTION “ Hamlet : . . . There is a special providence in the fall of a sparrow. If it be now ‘tis not

Adoption of Mobile Technology for Teaching Preparation in Improving Teaching Quality of Teachers

Directory of Open Access Journals (Sweden)

Aliff Nawi

2015-07-01

Full Text Available This study aims to identify the readiness of teachers to use mobile phones for the purpose of teaching preparation. The study also reviewed the level of teachers’ satisfaction when using the mobile technology applications developed for the purpose of teaching and learning in the classroom. This study used the mix method to collect data. A total of 31 teachers were involved in answering the questionnaire and seven teachers were interviewed to obtain supportive data. The findings show that the use of applications on mobile phones can help teachers smoothen the lesson preparation. In addition, the use of mobile technology also gives satisfaction to the teachers in enhancing their knowledge in the field of teaching. However, the technical aspects are still a priority and influence the usability aspects of an educational application. The study also revealed that the end users’ age factor is important because it affects the frequency and usage of mobile technology in developing their skills. In conclusion, the use of mobile technology among teachers is appropriate and facilitates the teaching activities.

Semantic-Web Technology: Applications at NASA

Science.gov (United States)

Ashish, Naveen

2004-01-01

We provide a description of work at the National Aeronautics and Space Administration (NASA) on building system based on semantic-web concepts and technologies. NASA has been one of the early adopters of semantic-web technologies for practical applications. Indeed there are several ongoing 0 endeavors on building semantics based systems for use in diverse NASA domains ranging from collaborative scientific activity to accident and mishap investigation to enterprise search to scientific information gathering and integration to aviation safety decision support We provide a brief overview of many applications and ongoing work with the goal of informing the external community of these NASA endeavors.

[The clinical application of three dimention printing technology].

Science.gov (United States)

Zhong, S Z; Fang, C H

2016-09-01

In recent years, the three-dimentional(3D)printing technology is gradually applied in medicine.Now, the 3D printing has already play an important role in medical education, surgical device development, prosthesis implantation and so on.There are still many challenges and difficulties in the clinical overall application of 3D printing for some time, but it also contains a huge application prospect.Once with appropriate applications of this technology, it will be a major breakthrough in iatrical history once more.

Idaho National Laboratory Emergency Readiness Assurance Plan — Fiscal Year 2016

International Nuclear Information System (INIS)

None, None

2016-01-01

Battelle Energy Alliance, LLC, the prime contractor for Idaho National Laboratory (INL), provides this Emergency Readiness Assurance Plan (ERAP) for Fiscal Year 2016 in accordance with DOE O 151.1C, “Comprehensive Emergency Management System.” The ERAP documents the readiness of the INL Emergency Management Program using emergency response planning and preparedness activities as the basis. It describes emergency response planning and preparedness activities, and where applicable, summarizes and/or provides supporting information in tabular form for easy access to data. The ERAP also provides budget, personnel, and planning forecasts for Fiscal Year 2017. Specifically, the ERAP assures the Department of Energy Idaho Operations Office that stated emergency capabilities at INL are sufficient to implement PLN 114, “INL Emergency Plan/RCRA Contingency Plan.”

Idaho National Laboratory Emergency Readiness Assurance Plan — Fiscal Year 2014

Energy Technology Data Exchange (ETDEWEB)

Bush, Shane [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2014-09-01

Battelle Energy Alliance, LLC, the prime contractor for Idaho National Laboratory (INL), provides this Emergency Readiness Assurance Plan (ERAP) for Fiscal Year 2014 in accordance with DOE O 151.1C, “Comprehensive Emergency Management System.” The ERAP documents the readiness of the INL Emergency Management Program using emergency response planning and preparedness activities as the basis. It describes emergency response planning and preparedness activities, and where applicable, summarizes and/or provides supporting information in tabular form for easy access to data. The ERAP also provides budget, personnel, and planning forecasts for Fiscal Year 2015. Specifically, the ERAP assures the Department of Energy Idaho Operations Office that stated emergency capabilities at INL are sufficient to implement PLN-114, “INL Emergency Plan/RCRA Contingency Plan.”

Idaho National Laboratory Emergency Readiness Assurance Plan — Fiscal Year 2016

Energy Technology Data Exchange (ETDEWEB)

None, None

2016-09-13

Battelle Energy Alliance, LLC, the prime contractor for Idaho National Laboratory (INL), provides this Emergency Readiness Assurance Plan (ERAP) for Fiscal Year 2016 in accordance with DOE O 151.1C, “Comprehensive Emergency Management System.” The ERAP documents the readiness of the INL Emergency Management Program using emergency response planning and preparedness activities as the basis. It describes emergency response planning and preparedness activities, and where applicable, summarizes and/or provides supporting information in tabular form for easy access to data. The ERAP also provides budget, personnel, and planning forecasts for Fiscal Year 2017. Specifically, the ERAP assures the Department of Energy Idaho Operations Office that stated emergency capabilities at INL are sufficient to implement PLN 114, “INL Emergency Plan/RCRA Contingency Plan.”

Readiness for hospital discharge: A concept analysis.

Science.gov (United States)

Galvin, Eileen Catherine; Wills, Teresa; Coffey, Alice

2017-11-01

To report on an analysis on the concept of 'readiness for hospital discharge'. No uniform operational definition of 'readiness for hospital discharge' exists in the literature; therefore, a concept analysis is required to clarify the concept and identify an up-to-date understanding of readiness for hospital discharge. Clarity of the concept will identify all uses of the concept; provide conceptual clarity, an operational definition and direction for further research. Literature review and concept analysis. A review of literature was conducted in 2016. Databases searched were: Academic Search Complete, CINAHL Plus with Full Text, PsycARTICLES, Psychology and Behavioural Sciences Collection, PsycINFO, Social Sciences Full Text (H.W. Wilson) and SocINDEX with Full Text. No date limits were applied. Identification of the attributes, antecedents and consequences of readiness for hospital discharge led to an operational definition of the concept. The following attributes belonging to 'readiness for hospital discharge' were extracted from the literature: physical stability, adequate support, psychological ability, and adequate information and knowledge. This analysis contributes to the advancement of knowledge in the area of hospital discharge, by proposing an operational definition of readiness for hospital discharge, derived from the literature. A better understanding of the phenomenon will assist healthcare professionals to recognize, measure and implement interventions where necessary, to ensure patients are ready for hospital discharge and assist in the advancement of knowledge for all professionals involved in patient discharge from hospital. © 2017 John Wiley & Sons Ltd.

Quantum Mechanics - Fundamentals and Applications to Technology

Science.gov (United States)

Singh, Jasprit

1996-10-01

Explore the relationship between quantum mechanics and information-age applications This volume takes an altogether unique approach to quantum mechanics. Providing an in-depth exposition of quantum mechanics fundamentals, it shows how these concepts are applied to most of today's information technologies, whether they are electronic devices or materials. No other text makes this critical, essential leap from theory to real-world applications. The book's lively discussion of the mathematics involved fits right in with contemporary multidisciplinary trends in education: Once the basic formulation has been derived in a given chapter, the connection to important technological problems is summarily described. The many helpful features include * Twenty-eight application-oriented sections that focus on lasers, transistors, magnetic memories, superconductors, nuclear magnetic resonance (NMR), and other important technology-driving materials and devices * One hundred solved examples, with an emphasis on numerical results and the connection between the physics and its applications * End-of-chapter problems that ground the student in both fundamental and applied concepts * Numerous figures and tables to clarify the various topics and provide a global view of the problems under discussion * Over two hundred illustrations to highlight problems and text A book for the information age, Quantum Mechanics: Fundamentals and Applications to Technology promises to become a standard in departments of electrical engineering, applied physics, and materials science, as well as physics. It is an excellent text for senior undergraduate and graduate students, and a helpful reference for practicing scientists, engineers, and chemists in the semiconductor and electronic industries.

Recent advances in application of EB Technology

Energy Technology Data Exchange (ETDEWEB)

Mittendorfer, J [Mediscan GmbH, Kremsmuenster (Austria)

2001-07-01

In this paper recent advances in application of electron beam technology are presented. Important industrial and scientific achievements of the international community, together with research by Mediscan, Austria, an operator of state-of-the-art electron beam service center and innovator in the field of EB-Technology are reviewed. In addition, areas which may play an important role in the future are identified. Special focus is on the use of X-ray converters and the potential for industrial applications. (author)

Recent advances in application of EB Technology

International Nuclear Information System (INIS)

Mittendorfer, J.

2001-01-01

In this paper recent advances in application of electron beam technology are presented. Important industrial and scientific achievements of the international community, together with research by Mediscan, Austria, an operator of state-of-the-art electron beam service center and innovator in the field of EB-Technology are reviewed. In addition, areas which may play an important role in the future are identified. Special focus is on the use of X-ray converters and the potential for industrial applications. (author)

Characterization and assessment of novel bulk storage technologies : a study for the DOE Energy Storage Systems program.

Energy Technology Data Exchange (ETDEWEB)

Huff, Georgianne; Tong, Nellie (KEMA Consulting, Fairfax, VA); Fioravanti, Richard (KEMA Consulting, Fairfax, VA); Gordon, Paul (Sentech/SRA International, Bethesda, MD); Markel, Larry (Sentech/SRA International, Bethesda, MD); Agrawal, Poonum (Sentech/SRA International, Bethesda, MD); Nourai, Ali (KEMA Consulting, Fairfax, VA)

2011-04-01

This paper reports the results of a high-level study to assess the technological readiness and technical and economic feasibility of 17 novel bulk energy storage technologies. The novel technologies assessed were variations of either pumped storage hydropower (PSH) or compressed air energy storage (CAES). The report also identifies major technological gaps and barriers to the commercialization of each technology. Recommendations as to where future R&D efforts for the various technologies are also provided based on each technology's technological readiness and the expected time to commercialization (short, medium, or long term). The U.S. Department of Energy (DOE) commissioned this assessment of novel concepts in large-scale energy storage to aid in future program planning of its Energy Storage Program. The intent of the study is to determine if any new but still unproven bulk energy storage concepts merit government support to investigate their technical and economic feasibility or to speed their commercialization. The study focuses on compressed air energy storage (CAES) and pumped storage hydropower (PSH). It identifies relevant applications for bulk storage, defines the associated technical requirements, characterizes and assesses the feasibility of the proposed new concepts to address these requirements, identifies gaps and barriers, and recommends the type of government support and research and development (R&D) needed to accelerate the commercialization of these technologies.

Pulse-power technology and its applications at LBT, Nagaoka

Energy Technology Data Exchange (ETDEWEB)

Yatsui, K; Masuda, W; Grigoriu, C; Masugata, K; Jiang, W; Imada, G; Imanari, K; Sonegawa, T; Chishiro, E [Laboratory of Beam Technology, Nagaoka University of Technology (Japan)

1997-12-31

Research activities on pulsed power technology and its applications at Laboratory of Beam Technology, Nagaoka University of Technology are reviewed. These activities include 1) development of a high power induction type linear accelerator (8 MV, 5 kA, 50 ns), 2) development of intense ion beam source, and 3) applications of pulsed ion beam in thin film and nanosize powder production. (author). 20 figs., 9 refs.

MOD-RTG multicouple test results and mission readiness

International Nuclear Information System (INIS)

Hartman, R.F.; Kelly, C.E.

1993-01-01

MOD-RTG represents the design configuration for the next generation of Radioisotope Thermoelectric Generators (RTG), aimed at improving specific power and efficiency over current General Purpose Heat Source Radioisotope Thermoelectric Generators (GPHS-RTGs). The modular RTG reference design has been described in previous papers (Hartman 1988). The multicouple is a key element required for the successful development of the modular RTG. The multicouple is a high voltage, thermoelectric device employing a close packed, glass bonded thermopile array of twenty thermoelectric couples, connected in a series circuit. The multicouple is designed to operate at a 1270 K hot junction temperature and a 570 K cold junction temperature, yielding a power output of approximately 2.1 watts at 3.5 volts at beginning of life. The objectives of the MOD-RTG program are focused on establishing a multicouple life test data base and life prediction capability which will permit, with reasonable margin, a projected multicouple life of greater than eight (8) years. This paper summarizes the current status of multicouple life testing and performance modeling and the level of technology readiness needed to demonstrate mission readiness for MOD-RTG

Computed Tomography Technology: Development and Applications for Defence

International Nuclear Information System (INIS)

Baheti, G. L.; Saxena, Nisheet; Tripathi, D. K.; Songara, K. C.; Meghwal, L. R.; Meena, V. L.

2008-01-01

Computed Tomography(CT) has revolutionized the field of Non-Destructive Testing and Evaluation (NDT and E). Tomography for industrial applications warrants design and development of customized solutions catering to specific visualization requirements. Present paper highlights Tomography Technology Solutions implemented at Defence Laboratory, Jodhpur (DLJ). Details on the technological developments carried out and their utilization for various Defence applications has been covered.

Introduction to Plasma Technology Science, Engineering and Applications

CERN Document Server

Harry, John Ernest

2011-01-01

Written by a university lecturer with more than forty years experience in plasma technology, this book adopts a didactic approach in its coverage of the theory, engineering and applications of technological plasmas. The theory is developed in a unified way to enable brevity and clarity, providing readers with the necessary background to assess the factors that affect the behavior of plasmas under different operating conditions. The major part of the book is devoted to the applications of plasma technology and their accompanying engineering aspects, classified by the various pressure and densit

Intersatellite Link (ISL) application to commercial communications satellites. Volume 2: Technical final report

Science.gov (United States)

Young, S. Lee

1987-01-01

Intersatellite Link (ISL) applications can improve and expand communication satellite services in a number of ways. As the demand for orbital slots within prime regions of the geostationary arc increases, attention is being focused on ISLs as a method to utilize this resource more efficiently and circumvent saturation. Various GEO-to-GEO applications were determined that provide potential benefits over existing communication systems. A set of criteria was developed to assess the potential applications. Intersatellite link models, network system architectures, and payload configurations were developed. For each of the chosen ISL applications, ISL versus non-ISL satellite systems architectures were derived. Both microwave and optical ISL implementation approaches were evaluated for payload sizing and cost analysis. The technological availability for ISL implementations was assessed. Critical subsystems technology areas were identified, and an estamate of the schedule and cost to advance the technology to the requiered state of readiness was made.

1992 update of US EPA's Superfund Innovative Technology Evaluation (SITE) Emerging Technology Program

International Nuclear Information System (INIS)

Lewis, N.M.; Barkley, N.P.; Williams, T.

1992-01-01

The Superfund Innovative Technology Evaluation (SITE) Emerging Technology Program (ETP) has financially supported further development of bench- and pilot-scale testing and evaluation of innovative technologies for use at hazardous waste sites for five years. The ETP was established under the Superfund Amendments and Reauthorization Act (SARA) of 1986. The ETP complies with the goal of the SITE Program to promote, accelerate and make commercially available the development of alternative/innovative treatment technologies for use at Superfund sites. Technologies are submitted to the ETP through yearly solicitations for Preproposals. Applicants are asked to submit a detailed project proposal and a cooperative agreement application that requires Developer/EPA cost sharing. EPA co-funds selected Developers for one to two years. Second-year funding requires documentation of significant progress during the first year. Facilities, equipment, data collection, performance and development are monitored throughout the project. The US Department of Energy (DOE) and the US Air Force (USAF) are participants in the ETP. DOE has co-funded ETP projects since 1990 and the USAF since 1991. A goal of the ETP is to move developed technologies to the field-demonstration stage. A developer may be considered for participation in the SITE Demonstration Program if performance in the ETP indicates the technology is field-ready for evaluation. Six technology categories: biological, chemical, materials handling, physical, solidification/stabilization and thermal, are presently in the ETP. Technologies of primary interest to EPA are those that can treat complex mixtures of hazardous organic and inorganic contaminants and provide improved solids handling and/or pretreatment. An account of the background and progress of the ETP's first five years is presented in this paper. Technologies currently in the ETP are noted, and developers and EPA Project Managers, are listed. 4 refs., 11 figs., 6 tabs

Application of SharePoint Portal Technologies in Public Enterprises

Directory of Open Access Journals (Sweden)

Dragan Đokić

2015-03-01

Full Text Available Nowadays, systematic reforms are realized acrossmany countries. One of the characteristics of these reforms is necessity for rationalization of expenses in governmental and public enterprises. Rationalization of expenses can be achieved by more extensive application of information and communication technologies based on internet technologies and cloud computing. These systems include huge number of services, applications, resources, users and roles. At the same time, concepts of scalability, availability, ubiquity and pervasiveness need to be applied. This paper deals with application of portal technologies for enhanced content management, document management, and collaboration within public enterprises. The goal is to achieve efficient exchange of information on all hierarchical levels, as well as mechanisms of reporting and performance measurements, such as business intelligence and key performance indicators. The model is based on SharePoint portal technologies. A case study of application within the public enterprise Post of Serbia is described.

Applications and Advances in Electronic-Nose Technologies

Directory of Open Access Journals (Sweden)

Manuela Baietto

2009-06-01

Full Text Available Electronic-nose devices have received considerable attention in the field of sensor technology during the past twenty years, largely due to the discovery of numerous applications derived from research in diverse fields of applied sciences. Recent applications of electronic nose technologies have come through advances in sensor design, material improvements, software innovations and progress in microcircuitry design and systems integration. The invention of many new e-nose sensor types and arrays, based on different detection principles and mechanisms, is closely correlated with the expansion of new applications. Electronic noses have provided a plethora of benefits to a variety of commercial industries, including the agricultural, biomedical, cosmetics, environmental, food, manufacturing, military, pharmaceutical, regulatory, and various scientific research fields. Advances have improved product attributes, uniformity, and consistency as a result of increases in quality control capabilities afforded by electronic-nose monitoring of all phases of industrial manufacturing processes. This paper is a review of the major electronic-nose technologies, developed since this specialized field was born and became prominent in the mid 1980s, and a summarization of some of the more important and useful applications that have been of greatest benefit to man.

Advanced Turbine Technology Applications Project (ATTAP)

Science.gov (United States)

1994-01-01

Reports technical effort by AlliedSignal Engines in sixth year of DOE/NASA funded project. Topics include: gas turbine engine design modifications of production APU to incorporate ceramic components; fabrication and processing of silicon nitride blades and nozzles; component and engine testing; and refinement and development of critical ceramics technologies, including: hot corrosion testing and environmental life predictive model; advanced NDE methods for internal flaws in ceramic components; and improved carbon pulverization modeling during impact. ATTAP project is oriented toward developing high-risk technology of ceramic structural component design and fabrication to carry forward to commercial production by 'bridging the gap' between structural ceramics in the laboratory and near-term commercial heat engine application. Current ATTAP project goal is to support accelerated commercialization of advanced, high-temperature engines for hybrid vehicles and other applications. Project objectives are to provide essential and substantial early field experience demonstrating ceramic component reliability and durability in modified, available, gas turbine engine applications; and to scale-up and improve manufacturing processes of ceramic turbine engine components and demonstrate application of these processes in the production environment.

Developing evidence-informed decision making in a hospice: an evaluation of organisational readiness.

Science.gov (United States)

Morris, Jenny; Stewart, Amy; Richardson, Janet

2013-06-01

Multiprofessional home care and hospice teams should play a part in evidence-informed decision making. To assess organisational readiness to adopt evidence-informed decision making in a hospice in England. A mixed-methods approach was used. Clinical staff were surveyed regarding their attitudes to and skills in using evidence, and senior managers completed an organisation-based self-assessment tool recording the readiness of the organisation to embrace an evidence-informed focus. 81% of the staff completed the survey. Staff were committed to the principles of evidence-informed decision making, but overall lacked the necessary knowledge and skills. Information obtained from the management self-assessment highlighted that a priority was to develop an evidence-informed decision-making culture focusing on education, training, and policy development. The process used in this evaluation may be applicable to other areas of health care when assessing an organisation's readiness to incorporate evidence-informed decision making into policy and procedure.

BLDC technology and its application in weapon system launching ...

African Journals Online (AJOL)

In this paper Brushless DC (BLDC) Technology and its Application in Articulation of Weapon System Launching Platform using Electromechanical Servo Drive is presented. ... Due to inherent properties of BLDC Technology BLDC Motors and Drives are profoundly used in military and strategic weapon system applications.

Application of stereo-imaging technology to medical field.

Science.gov (United States)

Nam, Kyoung Won; Park, Jeongyun; Kim, In Young; Kim, Kwang Gi

2012-09-01

There has been continuous development in the area of stereoscopic medical imaging devices, and many stereoscopic imaging devices have been realized and applied in the medical field. In this article, we review past and current trends pertaining to the application stereo-imaging technologies in the medical field. We describe the basic principles of stereo vision and visual issues related to it, including visual discomfort, binocular disparities, vergence-accommodation mismatch, and visual fatigue. We also present a brief history of medical applications of stereo-imaging techniques, examples of recently developed stereoscopic medical devices, and patent application trends as they pertain to stereo-imaging medical devices. Three-dimensional (3D) stereo-imaging technology can provide more realistic depth perception to the viewer than conventional two-dimensional imaging technology. Therefore, it allows for a more accurate understanding and analysis of the morphology of an object. Based on these advantages, the significance of stereoscopic imaging in the medical field increases in accordance with the increase in the number of laparoscopic surgeries, and stereo-imaging technology plays a key role in the diagnoses of the detailed morphologies of small biological specimens. The application of 3D stereo-imaging technology to the medical field will help improve surgical accuracy, reduce operation times, and enhance patient safety. Therefore, it is important to develop more enhanced stereoscopic medical devices.

Solar array technology evaluation program for SEPS (Solar Electrical Propulsion Stage)

Science.gov (United States)

1974-01-01

An evaluation of the technology and the development of a preliminary design for a 25 kilowatt solar array system for solar electric propulsion are discussed. The solar array has a power to weight ratio of 65 watts per kilogram. The solar array system is composed of two wings. Each wing consists of a solar array blanket, a blanket launch storage container, an extension/retraction mast assembly, a blanket tensioning system, an array electrical harness, and hardware for supporting the system for launch and in the operating position. The technology evaluation was performed to assess the applicable solar array state-of-the-art and to define supporting research necessary to achieve technology readiness for meeting the solar electric propulsion system solar array design requirements.

Management assessment of tank waste remediation system contractor readiness to proceed with phase 1B privatization

International Nuclear Information System (INIS)

Certa, P.J.

1998-01-01

Readiness to Proceed With Phase 1B Privatization documents the processes used to determine readiness to proceed with tank waste treatment technologies from private industry, now known as TWRS privatization. An overall systems approach was applied to develop action plans to support the retrieval and disposal mission of the TWRS Project. The systems and infrastructure required to support the mission are known. Required systems are either in place or plans have been developed to ensure they exist when needed. Since October 1996 a robust system engineering approach to establishing integrated Technical Baselines, work breakdown structures, tank farms organizational structure and configurations, work scope, and costs has become part of the culture within the TWRS Project. An analysis of the programmatic, management, and technical activities necessary to declare readiness to proceed with execution of the mission demonstrates that the system, personnel, and hardware will be on line and ready to support the private contractors. The systems approach included defining the retrieval and disposal mission requirements and evaluating the readiness of the Project Hanford Management Contract (PHMC) team to support initiation of waste processing by the private contractors in June 2002 and to receive immobilized waste shortly thereafter. The Phase 1 feed delivery requirements from the private contractor Requests for Proposal were reviewed. Transfer piping routes were mapped, existing systems were evaluated, and upgrade requirements were defined

Cultural Responsive Teaching Readiness Scale Validity and Reliability Study

Directory of Open Access Journals (Sweden)

Kasım KARATAŞ

2017-12-01

Full Text Available The aim of this research is to develop a measurement instrument that will determine the cultural responsive teaching readiness level of teacher candidates. The study group consisted of a total of 231 candidate teachers, of which 83 were males and 148 were females, who were attending their final year of class teacher education programs at various Turkish universities during the 2016-2017 education year. In the first phase, a 33-item draft form was presented to experts to be reviewed. Based on the feedback received, revisions were made and the final scale was applied to a group of 231 candidate teachers. In the analysis of the data obtained as the result of the application, Exploratory Factor Analysis (EFA was performed. The EFA produced 21 items within a two-factor structure as, “Personal Readiness” and “Professional Readiness.” It was observed that the sub-factors were components of the “cultural responsive teaching readiness” dimension, and that the goodness of fit measures obtained as a result of the First and Second Level Confirmatory Factor Analyzes (CFA were high. In addition, reliability coefficients were found to be high as a result of reliability measurements. With the help of these findings, this study concludes that the Cultural Responsive Teaching Readiness scale is both valid and reliable.

Industrial applications of electron beam technology

International Nuclear Information System (INIS)

Khairul Zaman Mohd Dahlan

1997-01-01

Electron beam technology was first introduced in Malaysia in 1989 with the conclusion of the bilateral cooperation between the Malaysian Institute for Nuclear Technology Research (MINT) and Japan International Co-operation Agency (JICA) on Radiation Application Projects. Two electron beam accelerators with energy of 3.0 MeV and 200 keV were installed at MINT. These two accelerators pave the way for R and D to be carried out in radiation processing of polymers for cross-linking and surface curing. In 1994, another electron beam accelerator was installed in the private sector for cross-linking of home appliance wires. Since then, two more accelerators were installed in the private sector for cross-linking of heat shrinkable plastic films. Recently, a local company has acquired a low energy electron beam machine for cross-linking of plastic film. Within a period of 7 years, industrial applications of electron beam technology in Malaysia have increased significantly

SP-100 space reactor power system readiness

International Nuclear Information System (INIS)

Josloff, A.T.; Matteo, D.N.; Bailey, H.S.

1992-01-01

This paper discusses the SP-100 Space Reactor Power System which is being developed by GE, under contract to the U.S. Department of Energy, to provide electrical power in the range of 10's to 100's of kW. The system represents an enabling technology for a wide variety of earth orbital and interplanetary science missions, nuclear electric propulsion (NEP) stages, and lunar/Mars surface power for the Space Exploration Initiative (SEI). The technology and design is now at a state of readiness to support the definition of early flight demonstration missions. Of particular importance is that SP-100 meets the demanding U.S. safety performance, reliability and life requirements. The system is scalable and flexible and can be configured to provide 10's to 100's of kWe without repeating development work and can meet DoD goals for an early, low-power demonstration flight in the 1996-1997 time frame

TRENDS IN THE USE OF INFORMATION TECHNOLOGY IN LOGISTICS SYSTEMS MANAGEMENT

Directory of Open Access Journals (Sweden)

Dominika Crnjac Milić

2017-01-01

Full Text Available There are more and more modern logistics systems on the market that, as part of control systems, must guarantee production flexibility, required delivery dates, market readiness and liability for binding capital into inventory. Market globalization imposes the necessity of meeting certain standards in business that guarantee the quality of work done. The rapid development and use of information and communication technologies in support of the individual needs of users are becoming increasingly important for successful implementation of business activities. The paper analyzes the role of information and communication technologies in logistic processes and in the integration of logistics systems. Examples from practice confirm the reasons for increased investments made by companies engaged in this segment of work with an aim to optimize business operations and increase profits. The emphasis is placed on the significant role of information technology in logistics operations, current results and applications, as well as possible future applications.

Ultra-thin chip technology and applications

CERN Document Server

2010-01-01

Ultra-thin chips are the "smart skin" of a conventional silicon chip. This book shows how very thin and flexible chips can be fabricated and used in many new applications in microelectronics, microsystems, biomedical and other fields. It provides a comprehensive reference to the fabrication technology, post processing, characterization and the applications of ultra-thin chips.

Application of AI technology to nuclear plant operations

International Nuclear Information System (INIS)

Sackett, J.I.

1988-01-01

In this paper, applications of Artificial Intelligence (AI) Technology to nuclear-power plant operation are reviewed. AI Technology is advancing rapidly and in the next five years is expected to enjoy widespread application to operation, maintenance, management and safety. Near term emphasis on a sensor validation, scheduling, alarm handling, and expert systems for procedural assistance. Ultimate applications are envisioned to culminate in autonomous control such as would be necessary for a power system in space, where automatic control actions are taken based upon reasoned conclusions regarding plant conditions, capability and control objectives

Technology Innovations from NASA's Next Generation Launch Technology Program

Science.gov (United States)

Cook, Stephen A.; Morris, Charles E. K., Jr.; Tyson, Richard W.

2004-01-01

NASA's Next Generation Launch Technology Program has been on the cutting edge of technology, improving the safety, affordability, and reliability of future space-launch-transportation systems. The array of projects focused on propulsion, airframe, and other vehicle systems. Achievements range from building miniature fuel/oxygen sensors to hot-firings of major rocket-engine systems as well as extreme thermo-mechanical testing of large-scale structures. Results to date have significantly advanced technology readiness for future space-launch systems using either airbreathing or rocket propulsion.

E-LEARNING READINESS AMONG MEDICAL EDUCATORS IN UNIVERSITI SAINS ISLAM MALAYSIA

OpenAIRE

Salleha Khalid; Tengku Madeehah Tengku Mohd; Khadijah Hassanah; Suhaila Sanip; Muhammad Shamsir Aris; Khaironi Sharif; Mohd Mokthar

2014-01-01

Recent advances in information technology has made e-learning feasible in many fields of education. Medical education is not any different. This survey is conducted among all the medical educators in Universiti Sains Islam Malaysia (USIM) assessing their readiness and attitudes towards e-learning. A cross-sectional questionnaires assessing the IT skills, Internet usage, attitude, perceived benefits and usage of e-learning among USIM medical lecturers were used. Data gained were then analyzed....

Educators' Perceived Importance of Web 2.0 Technology Applications

Science.gov (United States)

Pritchett, Christal C.; Wohleb, Elisha C.; Pritchett, Christopher G.

2013-01-01

This research study was designed to examine the degree of perceived importance of interactive technology applications among various groups of certified educators; the degree to which education professionals utilized interactive online technology applications and to determine if there was a significant difference between the different groups based…

Beyond College Eligibility: A New Framework for Promoting College Readiness. College Readiness Indicator Systems Resource Series

Science.gov (United States)

Annenberg Institute for School Reform at Brown University, 2014

2014-01-01

The College Readiness Indicator Systems (CRIS) initiative was developed in response to a troubling pattern: More students than ever are enrolling in college after high school, but many of them are not college ready, as evidenced by persistently low rates of college completion. The sense of urgency to close the gap between college eligibility and…

The investigation of nano-monitoring technology and the probability analysis of application of nuclear technology

International Nuclear Information System (INIS)

Kang Kejun; Wang Xuewu; Gao Wenhuan

1999-01-01

After several-decade of development, nano science/nano technology has become a scientific and technical frontier that with major trends foreseen in several disciplines. By connecting with the development of nano science/nano technology and considering the human body environment that the nano system is applicable in, the author analyzes the probability of the present nuclear detection technologies integrating and application with the monitoring of nano system, and draws an analysis of optimality choice

Organisational readiness for introducing a performance management system

Directory of Open Access Journals (Sweden)

Michael Ochurub

2012-09-01

Full Text Available Orientation: The successful introduction of performance management systems to the public service requires careful measurement of readiness for change.Research purpose: This study investigated the extent to which employees were ready for change as an indication of whether their organisation was ready to introduce a performance management system (PMS.Motivation for the study: Introducing system changes in organisations depends on positive employee preconditions. There is some debate over whether organisations can facilitate these preconditions. This research investigates change readiness linked to the introduction of a PMS in a public sector organisation. The results add to the growing literature on levels of change readiness.Research design, approach and method: The researchers used a quantitative, questionnairebased design. Because the organisation was large, the researchers used stratified sampling to select a sample from each population stratum. The sample size was 460, which constituted 26% of the total population. They used a South African change readiness questionnaire to elicit employee perceptions and opinions.Main findings: The researchers found that the organisation was not ready to introduce a PMS. The study identified various challenges and key factors that were negatively affecting the introduction of a PMS.Practical/managerial implications: The intention to develop and introduce performance management systems is generally to change the attitudes, values and approaches of managers and employees to the new strategies, processes and plans to improve productivity and performance. However, pre-existing conditions and attitudes could have an effect. It is essential to ensure that organisations are ready to introduce performance management systems and to provide sound change leadership to drive the process effectively. This study contributes to the body of knowledge about the challenges and factors organisations should consider when they

Review on thin-film transistor technology, its applications, and possible new applications to biological cells

Science.gov (United States)

Tixier-Mita, Agnès; Ihida, Satoshi; Ségard, Bertrand-David; Cathcart, Grant A.; Takahashi, Takuya; Fujita, Hiroyuki; Toshiyoshi, Hiroshi

2016-04-01

This paper presents a review on state-of-the-art of thin-film transistor (TFT) technology and its wide range of applications, not only in liquid crystal displays (TFT-LCDs), but also in sensing devices. The history of the evolution of the technology is first given. Then the standard applications of TFT-LCDs, and X-ray detectors, followed by state-of-the-art applications in the field of chemical and biochemical sensing are presented. TFT technology allows the fabrication of dense arrays of independent and transparent microelectrodes on large glass substrates. The potential of these devices as electrical substrates for biological cell applications is then described. The possibility of using TFT array substrates as new tools for electrical experiments on biological cells has been investigated for the first time by our group. Dielectrophoresis experiments and impedance measurements on yeast cells are presented here. Their promising results open the door towards new applications of TFT technology.

Measuring E-Learning Readiness among EFL Teachers in Intermediate Public Schools in Saudi Arabia

Science.gov (United States)

Al-Furaydi, Ahmed Ajab

2013-01-01

This study will determine their readiness level for the e-learning in several aspects such as attitude toward e-learning, and computer literacy also this study attempt to investigate the main the barriers that EFL teachers have to overcome while incorporating e-learning into their teaching. The theory upon which the study was technology acceptance…

Sacubitril/Valsartan for Heart Failure: Exciting Times but Are Doctors Informed and Ready?

Directory of Open Access Journals (Sweden)

Prithwish Banerjee

2017-01-01

Full Text Available Sacubitril/Valsartan in now being prescribed by heart failure/cardiology teams across the United Kingdom following the publication of the NICE technology appraisal guidance, but is everyone ready for it? This article discusses the practical aspects of what to do and what not to do in relation to the drug, based on real world experience from our centre.

'Shovel-Ready' applications of stem cell advances for pediatric heart disease.

Science.gov (United States)

Files, Matthew D; Boucek, Robert J

2012-10-01

The past decade has seen remarkable advances in the field of stem cell biology. Many new technologies and applications are passing the translational phase and likely will soon be relevant for the clinical pediatric cardiologist. This review will focus on two advances in basic science that are now translating into clinical trials. The first advance is the recognition, characterization, and recent therapeutic application of resident cardiac progenitor cells (CPCs). Early results of adult trials and scattered case reports in pediatric patients support expanding CPC-based trials for end-stage heart failure in pediatric patients. The relative abundance of CPCs in the neonate and young child offers greater potential benefits in heart failure treatment than has been realized to date. The second advance is the technology of induced pluripotent stem cells (iPSCs), which reprograms differentiated somatic cells to an undifferentiated embryonic-like state. When iPSCs are differentiated into cardiomyocytes, they model a patient's specific disease, test pharmaceuticals, and potentially provide an autologous source for cell-based therapy. The therapeutic recruitment and/or replacement of CPCs has potential for enhancing cardiac repair and regeneration in children with heart failure. Use of iPSCs to model heart disease holds great potential to gain new insights into diagnosis, pathophysiology, and disease-specific management for genetic-based cardiovascular diseases that are prevalent in pediatric patients.

UTILITY ADVANCED TURBINE SYSTEMS(ATS) TECHNOLOGY READINESS TESTING

Energy Technology Data Exchange (ETDEWEB)

Kenneth A. Yackly

2001-06-01

The following paper provides an overview of GE's H System{trademark} technology, and specifically, the design, development, and test activities associated with the DOE Advanced Turbine Systems (ATS) program. There was intensive effort expended in bringing this revolutionary advanced technology program to commercial reality. In addition to describing the magnitude of performance improvement possible through use of H System{trademark} technology, this paper discusses the technological milestones during the development of the first 9H (50Hz) and 7H (60 Hz) gas turbines. To illustrate the methodical product development strategy used by GE, this paper discusses several technologies that were essential to the introduction of the H System{trademark}. Also included are analyses of the series of comprehensive tests of materials, components and subsystems that necessarily preceded full scale field testing of the H System{trademark}. This paper validates one of the basic premises with which GE started the H System{trademark} development program: exhaustive and elaborate testing programs minimized risk at every step of this process, and increase the probability of success when the H System{trademark} is introduced into commercial service. In 1995, GE, the world leader in gas turbine technology for over half a century, in conjunction with the DOE National Energy Technology Laboratory's ATS program, introduced its new generation of gas turbines. This H System{trademark} technology is the first gas turbine ever to achieve the milestone of 60% fuel efficiency. Because fuel represents the largest individual expense of running a power plant, an efficiency increase of even a single percentage point can substantially reduce operating costs over the life of a typical gas-fired, combined-cycle plant in the 400 to 500 megawatt range. The H System{trademark} is not simply a state-of-the-art gas turbine. It is an advanced, integrated, combined-cycle system in which every

Advanced technologies, systems, and applications

CERN Document Server

Avdaković, Samir

2017-01-01

This volume spans a wide range of technical disciplines and technologies, including complex systems, biomedical engineering, electrical engineering, energy, telecommunications, mechanical engineering, civil engineering, and computer science. The papers included in this volume were presented at the International Symposium on Innovative and Interdisciplinary Applications of Advanced Technologies (IAT), held in Neum, Bosnia and Herzegovina on June 26 and 27, 2016. This highly interdisciplinary volume is devoted to various aspects and types of systems. Systems thinking is crucial for successfully building and understanding man-made, natural, and social systems. .

Carbon Nanotube Thin Film Transistors for Flat Panel Display Application.

Science.gov (United States)

Liang, Xuelei; Xia, Jiye; Dong, Guodong; Tian, Boyuan; Peng, Lianmao

2016-12-01

Carbon nanotubes (CNTs) are promising materials for both high performance transistors for high speed computing and thin film transistors for macroelectronics, which can provide more functions at low cost. Among macroelectronics applications, carbon nanotube thin film transistors (CNT-TFT) are expected to be used soon for backplanes in flat panel displays (FPDs) due to their superior performance. In this paper, we review the challenges of CNT-TFT technology for FPD applications. The device performance of state-of-the-art CNT-TFTs are compared with the requirements of TFTs for FPDs. Compatibility of the fabrication processes of CNT-TFTs and current TFT technologies are critically examined. Though CNT-TFT technology is not yet ready for backplane production line of FPDs, the challenges can be overcome by close collaboration between research institutes and FPD manufacturers in the short term.

Non-nuclear power application of nuclear technology in Nigeria

International Nuclear Information System (INIS)

Funtua, I.I.

2008-01-01

Nuclear Technology applications are found in Food and Agriculture, Human Health, Water Resources, Industry, Environment, Education and Research.There are more potentials for the deployment of nuclear technology in more aspects of our life with needed economic development in Nigeria.Nuclear Technology plays and would continue to play vital role in Agriculture, Human health, Water resources and industry in Nigeria.Nuclear technologies have been useful in developmental efforts worldwide and for these to take hold, capacity building programmes must be expanded and the general public must have informed opinions about the benefits and risk associated with the technologies.This presentation gives an overview of nuclear technology applications in Nigeria in the following areas: Food and Agriculture, Human Health, Water Resources, Industry, Education and Research

Development and Pilot Test of the Workplace Readiness Questionnaire, a Theory-Based Instrument to Measure Small Workplaces' Readiness to Implement Wellness Programs.

Science.gov (United States)

Hannon, Peggy A; Helfrich, Christian D; Chan, K Gary; Allen, Claire L; Hammerback, Kristen; Kohn, Marlana J; Parrish, Amanda T; Weiner, Bryan J; Harris, Jeffrey R

2017-01-01

To develop a theory-based questionnaire to assess readiness for change in small workplaces adopting wellness programs. In developing our scale, we first tested items via "think-aloud" interviews. We tested the revised items in a cross-sectional quantitative telephone survey. The study setting comprised small workplaces (20-250 employees) in low-wage industries. Decision-makers representing small workplaces in King County, Washington (think-aloud interviews, n = 9), and the United States (telephone survey, n = 201) served as study subjects. We generated items for each construct in Weiner's theory of organizational readiness for change. We also measured workplace characteristics and current implementation of workplace wellness programs. We assessed reliability by coefficient alpha for each of the readiness questionnaire subscales. We tested the association of all subscales with employers' current implementation of wellness policies, programs, and communications, and conducted a path analysis to test the associations in the theory of organizational readiness to change. Each of the readiness subscales exhibited acceptable internal reliability (coefficient alpha range, .75-.88) and was positively associated with wellness program implementation ( p < .05). The path analysis was consistent with the theory of organizational readiness to change, except change efficacy did not predict change-related effort. We developed a new questionnaire to assess small workplaces' readiness to adopt and implement evidence-based wellness programs. Our findings also provide empirical validation of Weiner's theory of readiness for change.

APPLICATION OF NFC TECHNOLOGY IN PASSENGER RAIL TRANSPORT

Directory of Open Access Journals (Sweden)

Henryk KOMSTA

2016-09-01

Full Text Available The article discusses the possibility of the application of the NFC technology as a system of selling tickets in passenger rail transport. The NFC (Near Field Communication technology is a wireless and contactless technology of transmission of radio data over short distances (max. 5 cm. This technology is very similar to the RFID (Radio Frequency Identification technology. It is assumed that this technology will spread rapidly and that already in 2015 around 85% of the payments in the EU will be made via mobile phones. This paper presents a research of passenger interest in this method of payment for tickets in the passenger rail transport in Slovakia. Further, an analysis of the applications of the NFC technology as a system of selling tickets in passenger rail transport, including the protection of data in mobile phones, the processes in case of losing a mobile phone and ensuring the communication between both parties was presented in the article. The last part of this analysis shows the possibility of purchasing tickets regardless of the carrier and the transport type.

Advances in electronic-nose technologies developed for biomedical applications.

Science.gov (United States)

Wilson, Alphus D; Baietto, Manuela

2011-01-01

The research and development of new electronic-nose applications in the biomedical field has accelerated at a phenomenal rate over the past 25 years. Many innovative e-nose technologies have provided solutions and applications to a wide variety of complex biomedical and healthcare problems. The purposes of this review are to present a comprehensive analysis of past and recent biomedical research findings and developments of electronic-nose sensor technologies, and to identify current and future potential e-nose applications that will continue to advance the effectiveness and efficiency of biomedical treatments and healthcare services for many years. An abundance of electronic-nose applications has been developed for a variety of healthcare sectors including diagnostics, immunology, pathology, patient recovery, pharmacology, physical therapy, physiology, preventative medicine, remote healthcare, and wound and graft healing. Specific biomedical e-nose applications range from uses in biochemical testing, blood-compatibility evaluations, disease diagnoses, and drug delivery to monitoring of metabolic levels, organ dysfunctions, and patient conditions through telemedicine. This paper summarizes the major electronic-nose technologies developed for healthcare and biomedical applications since the late 1980s when electronic aroma detection technologies were first recognized to be potentially useful in providing effective solutions to problems in the healthcare industry.

Advances in Electronic-Nose Technologies Developed for Biomedical Applications

Directory of Open Access Journals (Sweden)

Alphus D. Wilson

2011-01-01

Full Text Available The research and development of new electronic-nose applications in the biomedical field has accelerated at a phenomenal rate over the past 25 years. Many innovative e-nose technologies have provided solutions and applications to a wide variety of complex biomedical and healthcare problems. The purposes of this review are to present a comprehensive analysis of past and recent biomedical research findings and developments of electronic-nose sensor technologies, and to identify current and future potential e-nose applications that will continue to advance the effectiveness and efficiency of biomedical treatments and healthcare services for many years. An abundance of electronic-nose applications has been developed for a variety of healthcare sectors including diagnostics, immunology, pathology, patient recovery, pharmacology, physical therapy, physiology, preventative medicine, remote healthcare, and wound and graft healing. Specific biomedical e-nose applications range from uses in biochemical testing, blood-compatibility evaluations, disease diagnoses, and drug delivery to monitoring of metabolic levels, organ dysfunctions, and patient conditions through telemedicine. This paper summarizes the major electronic-nose technologies developed for healthcare and biomedical applications since the late 1980s when electronic aroma detection technologies were first recognized to be potentially useful in providing effective solutions to problems in the healthcare industry.

Life Cycle Cost Analysis of Ready Mix Concrete Plant

Science.gov (United States)

Topkar, V. M.; Duggar, A. R.; Kumar, A.; Bonde, P. P.; Girwalkar, R. S.; Gade, S. B.

2013-11-01

India, being a developing nation is experiencing major growth in its infrastructural sector. Concrete is the major component in construction. The requirement of good quality of concrete in large quantities can be fulfilled by ready mix concrete batching and mixing plants. The paper presents a technique of applying the value engineering tool life cycle cost analysis to a ready mix concrete plant. This will help an investor or an organization to take investment decisions regarding a ready mix concrete facility. No economic alternatives are compared in this study. A cost breakdown structure is prepared for the ready mix concrete plant. A market survey has been conducted to collect realistic costs for the ready mix concrete facility. The study establishes the cash flow for the ready mix concrete facility helpful in investment and capital generation related decisions. Transit mixers form an important component of the facility and are included in the calculations. A fleet size for transit mixers has been assumed for this purpose. The life cycle cost has been calculated for the system of the ready mix concrete plant and transit mixers.

Solar Energy: Its Technologies and Applications

Science.gov (United States)

Auh, P. C.

1978-06-01

Solar heat, as a potential source of clean energy, is available to all of us. Extensive R and D efforts are being made to effectively utilize this renewable energy source. A variety of different technologies for utilizing solar energy have been proven to be technically feasible. Here, some of the most promising technologies and their applications are briefly described. These are: Solar Heating and Cooling of Buildings (SHACOB), Solar Thermal Energy Conversion (STC), Wind Energy Conversion (WECS), Bioconversion to Fuels (BCF), Ocean Thermal Energy Conversion (OTEC), and Photovoltaic Electric Power Systems (PEPS). Special emphasis is placed on the discussion of the SHACOB technologies, since the technologies are being expeditiously developed for the near commercialization.

The revolution of personalized psychiatry: will technology make it happen sooner?

Science.gov (United States)

Perna, G; Grassi, M; Caldirola, D; Nemeroff, C B

2018-04-01

Personalized medicine (PM) aims to establish a new approach in clinical decision-making, based upon a patient's individual profile in order to tailor treatment to each patient's characteristics. Although this has become a focus of the discussion also in the psychiatric field, with evidence of its high potential coming from several proof-of-concept studies, nearly no tools have been developed by now that are ready to be applied in clinical practice. In this paper, we discuss recent technological advances that can make a shift toward a clinical application of the PM paradigm. We focus specifically on those technologies that allow both the collection of massive as much as real-time data, i.e., electronic medical records and smart wearable devices, and to achieve relevant predictions using these data, i.e. the application of machine learning techniques.

Applications of three-dimensional printing technology in the cardiovascular field.

Science.gov (United States)

Shi, Di; Liu, Kai; Zhang, Xin; Liao, Hang; Chen, Xiaoping

2015-10-01

Three-dimensional (3-D) printing technology has rapidly developed in the last few decades. Meanwhile, the application of this technology has reached beyond the engineering field and expanded to almost all disciplines, including medicine. There has been much research on the medical applications of 3-D printing in neurosurgery, orthopedics, maxillofacial surgery, plastic surgery, tissue engineering, as well as other fields. Because of the complexity of the cardiovascular system, the application of this technology is limited and difficult, as compared to other disciplines, and thus there is much room for future development. Many of the difficulties associated with this technology must be overcome. Nonetheless, there is no doubt that 3-D printing technology will benefit patients with cardiovascular diseases in the near future.

Supercritical fluid technologies for ceramic-processing applications

International Nuclear Information System (INIS)

Matson, D.W.; Smith, R.D.

1989-01-01

This paper reports on the applications of supercritical fluid technologies for ceramic processing. The physical and chemical properties of these densified gases are summarized and related to their use as solvents and processing media. Several areas are identified in which specific ceramic processes benefit from the unique properties of supercritical fluids. The rapid expansion of supercritical fluid solutions provides a technique for producing fine uniform powders and thin films of widely varying materials. Supercritical drying technologies allow the formation of highly porous aerogel products with potentially wide application. Hydrothermal processes leading to the formation of large single crystals and microcrystalline powders can also be extended into the supercritical regime of water. Additional applications and potential applications are identified in the areas of extraction of binders and other additives from ceramic compacts, densification of porous ceramics, the formation of powders in supercritical micro-emulsions, and in preceramic polymer processing

Assessing farmers' community readiness towards the enhancement of natural enemy population in rice fields in Malacca

Science.gov (United States)

Fairuz, K.; Idris, A. G.; Syahrizan, S.; Hatijah, K.

2018-04-01

Malacca has committed to be a green technology state by the year 2020. Agriculture is one of the main industries that have been highlighted to achieve this goal especially rice farming activities. Some limitations for this issue have restricted the accomplishment of the plan including pesticide usage among rice farmers. The use of chemicals in rice field need to be reduced significantly in order to support the goal. One of the indicators to the successfulness of pesticide reduction is the increasing numbers of natural enemies' species abundance and population in the rice field. Natural enemies were important to regulate pest populations in rice field naturally. Farmers' readiness to participate in this issue is very important to ensure the successfulness. The level of readiness of farmers' community will determine whether they are ready or not to execute the plan. Unfortunately, such information in rice farmers' community was not properly measured. Thus this study was aimed to assess the readiness level of rice farmers' community to change in order to enhance natural enemies in their rice field. This study was adapting the CR model as its theoretical framework. Three rice farming area in Malacca were involved in this study namely, Jasin, Melaka Tengah and Alor Gajah. Questionnaires were used as major instrument and were randomly distributed to 224 farmers. Data collected were tested for their reliability, significance and level of readiness. Knowledge of issue, knowledge of effort and resources dimensions were found influencing the readiness dimension significantly, whilst the attitude and leadership dimensions were not. Generally, the level of readiness for farmers' community in Malacca was found in the sixth or initial stage, where some of them initially have started to practice a few related activities to enhance the natural enemies' population in their rice field. Continuous support and assistant from the leaders and local authorities are crucially needed in

Development of Laser-Induced Breakdown Spectroscopy Technologies for Nuclear Safeguards and Forensic Applications

International Nuclear Information System (INIS)

Chen, S.; El-Jaby, A.; Doucet, F.; Bouchard, P.; Sabsabi, M.

2015-01-01

Under the IAEA Task A1855, the Canadian Safeguards Support Program (CSSP) undertook the development of laser-induced breakdown spectroscopy (LIBS) technologies for safeguards applications. Collaboration between the Canadian Nuclear Safety Commission (CNSC), the National Research Council Canada, and the IAEA has demonstrated that the LIBS technique combined with chemometrics can determine the origins of yellowcake, identify maraging steels, aluminium alloys, and magnesium alloys, among other materials involved in the nuclear industry; and determine heavy water content as well as the isotope ratios of other actinides. As part of the task, the CSSP has developed a portable LIBS system to enable inspectors to characterize specific nuclear and non-nuclear material during complementary access and inspections. This device was recently tested by the IAEA in both Vienna and Siebersdorf for various metals and uranium bearing materials. The laser source proved to be stable and the chemometrics software was able to identify various materials. The device is ready for further in-depth testing. The chemometrics algorithm that has been developed for LIBS can also be adapted to nuclear forensics for the querying database. Multi-stage pattern recognition algorithms can reliably identify unknown materials among database populations (e.g., identify origins of yellowcake). Further work in this field is being undertaken as part of the CNSC's National Nuclear Forensics Library (NNFL) development activities for the Canadian National Nuclear Forensics Capability Project (CNNFCP). The paper will provide an overview of the LIBS techniques being developed for safeguards and forensic applications, and of progress in integrating all components into a compact unit. (author)

Technology-based suicide prevention: current applications and future directions.

Science.gov (United States)

Luxton, David D; June, Jennifer D; Kinn, Julie T

2011-01-01

This review reports on current and emerging technologies for suicide prevention. Technology-based programs discussed include interactive educational and social networking Web sites, e-mail outreach, and programs that use mobile devices and texting. We describe innovative applications such as virtual worlds, gaming, and text analysis that are currently being developed and applied to suicide prevention and outreach programs. We also discuss the benefits and limitations of technology-based applications and discuss future directions for their use.

Tenth Biennial Coherent Laser Radar Technology and Applications Conference

Science.gov (United States)

Kavaya, Michael J. (Compiler)

1999-01-01

The tenth conference on coherent laser radar technology and applications is the latest in a series beginning in 1980 which provides a forum for exchange of information on recent events current status, and future directions of coherent laser radar (or lidar or lader) technology and applications. This conference emphasizes the latest advancement in the coherent laser radar field, including theory, modeling, components, systems, instrumentation, measurements, calibration, data processing techniques, operational uses, and comparisons with other remote sensing technologies.

The application of radionuclides in technology

International Nuclear Information System (INIS)

Braun, H.

1979-01-01

Open radioactive materials are being increasingly applied in technology. In this summarizing survey, a report is given on their use in engineering, particularly for the optimization of processes and plants (material transport procedure e.g. in ore processing, mining technology, in the production of various industrial goods), furthermore on their application in corrosion and wear investigations (e.g. corrosion-protecting coatings, motor components, processing tools etc.). (RB) [de

Social networking services: technologies and applications

OpenAIRE

Puzyrnyy, Oleksandr

2011-01-01

Puzyrnyy, Oleksandr. 2011. Social networking services: technologies and applications. Bachelor's Thesis. Kemi-Tornio University of Applied Sciences. Business and Culture. Pages 52. The aim of this thesis is to describe the concept of social networking, its technological base, business opportunities and future perspectives. The study discovers how social networks are made and which different purposes they might have. In addition, social networking is viewed as a part of business strategy o...

Understanding Early Educators' Readiness to Change

Science.gov (United States)

Peterson, Shira M.

2012-01-01

Researchers in the fields of humanistic psychology, counseling, organizational change, and implementation science have been asking a question that is at the heart of today's early care and education quality improvement efforts: When it comes to changing one's behavior, what makes a person ready to change? Although the concept of readiness to…

High power density superconducting rotating machines—development status and technology roadmap

Science.gov (United States)

Haran, Kiruba S.; Kalsi, Swarn; Arndt, Tabea; Karmaker, Haran; Badcock, Rod; Buckley, Bob; Haugan, Timothy; Izumi, Mitsuru; Loder, David; Bray, James W.; Masson, Philippe; Stautner, Ernst Wolfgang

2017-12-01

Superconducting technology applications in electric machines have long been pursued due to their significant advantages of higher efficiency and power density over conventional technology. However, in spite of many successful technology demonstrations, commercial adoption has been slow, presumably because the threshold for value versus cost and technology risk has not yet been crossed. One likely path for disruptive superconducting technology in commercial products could be in applications where its advantages become key enablers for systems which are not practical with conventional technology. To help systems engineers assess the viability of such future solutions, we present a technology roadmap for superconducting machines. The timeline considered was ten years to attain a Technology Readiness Level of 6+, with systems demonstrated in a relevant environment. Future projections, by definition, are based on the judgment of specialists, and can be subjective. Attempts have been made to obtain input from a broad set of organizations for an inclusive opinion. This document was generated through a series of teleconferences and in-person meetings, including meetings at the 2015 IEEE PES General meeting in Denver, CO, the 2015 ECCE in Montreal, Canada, and a final workshop in April 2016 at the University of Illinois, Urbana-Champaign that brought together a broad group of technical experts spanning the industry, government and academia.

Readiness Assessment Plan, Hanford 200 areas treated effluent disposal facilities

International Nuclear Information System (INIS)

Ulmer, F.J.

1995-01-01

This Readiness Assessment Plan documents Liquid Effluent Facilities review process used to establish the scope of review, documentation requirements, performance assessment, and plant readiness to begin operation of the Treated Effluent Disposal system in accordance with DOE-RLID-5480.31, Startup and Restart of Facilities Operational Readiness Review and Readiness Assessments

Category 3 investigation-derived waste Readiness Evaluation Plan

International Nuclear Information System (INIS)

Ludowise, J.D.

1996-08-01

This Readiness Evaluation Plan presents the methodology used to assess the readiness for loading investigation-derived waste (IDW) drums on trucks for transport to the Environmental Restoration Disposal Facility (ERDF). The scope of this Readiness Evaluation Plan includes an assessment of the organizations, procedures, and regulatory approvals necessary for the handling of IDW containers and the subsequent transportation of materials to ERDF

Laser measurement technology fundamentals and applications

CERN Document Server

Donges, Axel

2015-01-01

Laser measurement technology has evolved in the last years in a versatile and reflationary way. Today, its methods are indispensable for research and development activities as well as for production technology. Every physicist and engineer should therefore gain a working knowledge of laser measurement technology. This book closes the gap of existing textbooks. It introduces in a comprehensible presentation laser measurement technology in all its aspects. Numerous figures, graphs and tables allow for a fast access into the matter. In the first part of the book the important physical and optical basics are described being necessary to understand laser measurement technology. In the second part technically significant measuring methods are explained and application examples are presented. Target groups of this textbook are students of natural and engineering sciences as well as working physicists and engineers, who are interested to make themselves familiar with laser measurement technology and its fascinating p...

Application of some advanced technologies in uranium industry

International Nuclear Information System (INIS)

Chen Zhenshi

2004-01-01

This presentation sets forth a brief survey of some current technologies (including exploration, mining, processing, tailings disposal, uranium mine reclamation, health and safety, etc.) in the uranium industry, relates that technology to economic, environmental and social concerns, and attempts to provide a projection of current trends into the future. Advances in technology are very important to the uranium industry because they provide various means to maintain future resource base through the discovery of new deposits; exploitation of lower-grade resources; and application of new technology to the known, but undeveloped resources. The application of advanced technology results in a continuing reduction in production costs; greatly increases in productivity; decreases or eliminates the adverse impacts on environment; as well as increases safety and well-being for employees. Thus, the sustainable development has been obtained in such aspects as resource base, economic exploitation, environmental protection and the ability to meet social obligations. (author)

Survey on Multimedia Technologies for Mobile Learning Applications

Directory of Open Access Journals (Sweden)

Paul POCATILU

2009-01-01

Full Text Available Mobile technologies are developing very fast. This paper presents a survey on multimedia technologies for mobile learning applications, focusing on multimedia programming techniques for Windows Mobile, Symbian, and Java ME.

Industrial applications of radiation technology

International Nuclear Information System (INIS)

Sarma, K.S.S.

2012-01-01

During the past one decade, Radiation Technology applications utilizing gamma radiation and high energy electrons have made a big way into the Indian industry bringing quality and value-added products in a more environment-friendly way. While radiation sterilization of health care products, hygienization of food materials, modification of polymer materials etc. are established as successful processes world wide including India, new applications are emerging especially in the field of environmental remediation. Two types of installations viz. gamma irradiators and high energy electron accelerators are in use right now to carry out such applications. The aim of the talk is to put forward before the audience about the potential applications developed in India and abroad, role of Department of Atomic Energy and current status of radiation processing for industrial utilization

Information Technologies of the Distributed Applications Design

Directory of Open Access Journals (Sweden)

Safwan Al SALAIMEH

2007-01-01

Full Text Available The questions of distributed systems development based on Java RMI, EJB and J2EE technologies and tools are rated. Here is brought the comparative analysis, which determines the domain of an expedient demand of the considered information technologies as applied to the concrete distributed applications requirements.

The psychometric properties of the Readiness and Motivation Questionnaire: a symptom-specific measure of readiness for change in the eating disorders.

Science.gov (United States)

Geller, Josie; Brown, Krista E; Srikameswaran, Suja; Piper, William; Dunn, Erin C

2013-09-01

Readiness for change, as assessed by the readiness and motivation interview (RMI), predicts a number of clinical outcome variables in eating disorders including enrollment in intensive treatment, symptom change, dropout, and relapse. Although clinically useful, the training and administration of the RMI is time consuming. The purpose of this research was to (a) develop a self-report, symptom-specific version of the RMI, the readiness and motivation questionnaire (RMQ), that can be used to assess readiness for change across all eating disorder diagnoses and (b) establish its psychometric properties. The RMQ provides stage of change, internality, and confidence scores for each of 4 eating disorder symptom domains (restriction, bingeing, and cognitive and compensatory behaviors). Individuals (N = 244) with current eating disorder diagnoses completed the RMQ and measures of convergent, discriminant, and criterion validity. Similar to the RMI scores, readiness scores on the RMQ differed according to symptom domain. Regarding criterion validity, RMQ scores were significantly associated with ratings of anticipated difficulty of recovery activities and completion of recovery activities. The RMQ contributed significant unique variance to anticipated difficulty of recovery activities, beyond those accounted for by the RMI and a questionnaire measure of global readiness. The RMQ is thus an acceptable alternative to the RMI, providing global and domain-specific readiness information when time or cost prohibits use of an interview.

Application of SDI technology in space propulsion

International Nuclear Information System (INIS)

Klein, A.J.

1992-01-01

Numerous technologies developed by the DOD within the SDI program are now available for adaptation to the requirements of commercial spacecraft; SDI has accordingly organized the Technology Applications Information System data base, which contains nearly 2000 nonproprietary abstracts on SDI technology. Attention is here given to such illustrative systems as hydrogen arcjets, ammonia arcjets, ion engines, SSTO launch vehicles, gel propellants, lateral thrusters, pulsed electrothermal thrusters, laser-powered rockets, and nuclear propulsion

Application study of nuclear technologies for integration chemical, biological and radiological technology

Energy Technology Data Exchange (ETDEWEB)

Shin, Jae Kon; Han, M. H.; Kim, Y. H.; Yang, J. E.; Jung, K. S.; Cha, H. K.; Moon, J.; La, K. H

2001-02-01

The projects are suggested the method to maximize the technology and research results which are being carried out by KAERI on the nuclear field. The study presents 1)the technology to rapidly and accurately determine and the nature of contamination, 2) the technology to predict the spread of contaminant and the magnitude of damage, and 3) the expert-aided decision making technology to identify the optimum counter-measures. And the solutions are also suggested the application to military technology in Chemical, Biological and Radiation field. In addition, I hope this kind of cooperation model come to be the good case of military civilian research harmony to improve the national competition capability.

What are the characteristics of 'sexually ready' adolescents? Exploring the sexual readiness of youth in urban poor Accra.

Science.gov (United States)

Biney, Adriana A E; Dodoo, F Nii-Amoo

2016-01-05

Adolescent sexual activity, especially among the urban poor, remains a challenge. Despite numerous interventions and programs to address the negative consequences arising from early and frequent sexual activity among youth in sub-Saharan Africa, including Ghana, only slight progress has been made. A plausible explanation is that our understanding of what adolescents think about sex and about their own sexuality is poor. In that sense, examining how adolescents in urban poor communities think about their sexual readiness, and identifying characteristics associated with that sexual self-concept dimension, should deepen our understanding of this topical issue. A total of 196 male and female adolescents, ages 12 to 19, were surveyed in the 2011 RIPS Urban Health and Poverty Project in Accra, Ghana. The youth responded to three statements which determined their levels of sexual readiness. Other background characteristics were also obtained enabling the assessment of the correlates of their preparedness to engage in sex. The data were analyzed using ordered logistic regression models. Overall, the majority of respondents did not consider themselves ready for sex. Multivariate analyses indicated that sexual experience, exposure to pornographic movies, gender, ethnicity and household wealth were significantly linked to their readiness for sex. Sexual readiness is related to sexual activity as well as other characteristics of the adolescents, suggesting the need to consider these factors in the design of programs and interventions to curb early sex. The subject of sexual readiness has to be investigated further to ensure adolescents do not identify with any negative effects of this sexual self-view.

Measuring Success: David Conley's College Readiness Framework and the Illinois College and Career Readiness Act. In Brief

Science.gov (United States)

Baber, Lorenzo D.; Castro, Erin L.; Bragg, Debra D.

2010-01-01

The purpose of this brief is to understand the Illinois College and Career Readiness (CCR) Act in light of David Conley's college readiness model. Although not mentioned specifically by the Illinois statute, evaluation results gathered by the Office of Community College Research and Leadership (OCCRL) show alignment between a number of programs…

Development and Content Validation of the Transition Readiness Inventory Item Pool for Adolescent and Young Adult Survivors of Childhood Cancer.

Science.gov (United States)

Schwartz, Lisa A; Hamilton, Jessica L; Brumley, Lauren D; Barakat, Lamia P; Deatrick, Janet A; Szalda, Dava E; Bevans, Katherine B; Tucker, Carole A; Daniel, Lauren C; Butler, Eliana; Kazak, Anne E; Hobbie, Wendy L; Ginsberg, Jill P; Psihogios, Alexandra M; Ver Hoeve, Elizabeth; Tuchman, Lisa K

2017-10-01

The development of the Transition Readiness Inventory (TRI) item pool for adolescent and young adult childhood cancer survivors is described, aiming to both advance transition research and provide an example of the application of NIH Patient Reported Outcomes Information System methods. Using rigorous measurement development methods including mixed methods, patient and parent versions of the TRI item pool were created based on the Social-ecological Model of Adolescent and young adult Readiness for Transition (SMART). Each stage informed development and refinement of the item pool. Content validity ratings and cognitive interviews resulted in 81 content valid items for the patient version and 85 items for the parent version. TRI represents the first multi-informant, rigorously developed transition readiness item pool that comprehensively measures the social-ecological components of transition readiness. Discussion includes clinical implications, the application of TRI and the methods to develop the item pool to other populations, and next steps for further validation and refinement. © The Author 2017. Published by Oxford University Press on behalf of the Society of Pediatric Psychology. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

Design Of Measurements For Evaluating Readiness Of Technoware Components To Meet The Required Standard Of Products

Science.gov (United States)

Fauzi, Ilham; Muharram Hasby, Fariz; Irianto, Dradjad

2018-03-01

Although government is able to make mandatory standards that must be obeyed by the industry, the respective industries themselves often have difficulties to fulfil the requirements described in those standards. This is especially true in many small and medium sized enterprises that lack the required capital to invest in standard-compliant equipment and machineries. This study aims to develop a set of measurement tools for evaluating the level of readiness of production technology with respect to the requirements of a product standard based on the quality function deployment (QFD) method. By combining the QFD methodology, UNESCAP Technometric model [9] and Analytic Hierarchy Process (AHP), this model is used to measure a firm’s capability to fulfill government standard in the toy making industry. Expert opinions from both the governmental officers responsible for setting and implementing standards and the industry practitioners responsible for managing manufacturing processes are collected and processed to find out the technological capabilities that should be improved by the firm to fulfill the existing standard. This study showed that the proposed model can be used successfully to measure the gap between the requirements of the standard and the readiness of technoware technological component in a particular firm.

G+ COMMUNITY: MEASURING TEACHERS’ READINESS AND ACCEPTANCE

Directory of Open Access Journals (Sweden)

Mohd Faisal Farish Ishak

2017-08-01

Full Text Available The purpose of this paper is to explore teachers’ acceptance and readiness in using the cloud-based community as a platform for professional collaboration related to their teaching and learning. Familiarity with certain social networking platforms has made the preferable collaboration among teachers only limited to using Facebook, WhatsApp or Telegram. However, with time and space constraints in schools, some of the sharing sessions could not be done effectively most of the time. The study focuses on teachers’ acceptance and readiness of having their community in the cloud when they were introduced to the platform during a Continuous Professional Development (CPD course. A total number of 61 teachers used Google Community named as ‘Contemporary Children’s Literature (CCL 2016’ as a platform for their Professional Learning Community (PLC during the course. Descriptive analysis was done using Google Sheets and the findings show that these teachers are receptive towards Google Community in terms of its engagement level, usefulness as well as ease of use. The introduction to Google Community has created a new pathway for their collaboration especially for teaching and learning purposes. In a nutshell, their acceptance towards the cloud-based community indicates that, given the right training channel, teachers are positive and opened to utilising and integrating the cloud-based technology in their current teaching practice.

Applications of computational intelligence in biomedical technology

CERN Document Server

Majernik, Jaroslav; Pancerz, Krzysztof; Zaitseva, Elena

2016-01-01

This book presents latest results and selected applications of Computational Intelligence in Biomedical Technologies. Most of contributions deal with problems of Biomedical and Medical Informatics, ranging from theoretical considerations to practical applications. Various aspects of development methods and algorithms in Biomedical and Medical Informatics as well as Algorithms for medical image processing, modeling methods are discussed. Individual contributions also cover medical decision making support, estimation of risks of treatments, reliability of medical systems, problems of practical clinical applications and many other topics  This book is intended for scientists interested in problems of Biomedical Technologies, for researchers and academic staff, for all dealing with Biomedical and Medical Informatics, as well as PhD students. Useful information is offered also to IT companies, developers of equipment and/or software for medicine and medical professionals.  .

The clients’ readiness to use mental health care services: Experiences and perceptions from Iranian context

Science.gov (United States)

Alavi, Mousa; Irajpour, Alireza

2013-01-01

Background: Underutilization of mental health care services has been a challenge for the health care providers for many years. This challenge could be met in part by improving the clients’ readiness to use such services. This study aimed to introduce the important aspects of the clients’ readiness to use mental health services in the Iranian context. Materials and Methods: A thematic analysis of in-depth interviews was undertaken using a constant comparative approach. Participants (11 health professionals consisting of 3 physicians, 7 nurses, 1 psychologist, and 5 patients/their family members) were recruited from educational hospitals affiliated with Isfahan University of Medical Sciences, Iran. The credibility and trustworthiness was grounded on four aspects: factual value, applicability, consistency, and neutrality. Results: The study findings uncovered two important aspects of the clients’ readiness for utilizing mental health care services. These are described through two themes and related sub-themes: “The clients’ awareness” implies the cognitive aspect of readiness and “the clients’ attitudes” implies the psychological aspect of readiness, both of which have perceived to cultivate a fertile context through which the clients could access and use the mental health services more easily. Conclusions: For the health care system in Isfahan, Iran to be successful in delivering mental health services, training programs directed to prepare service users should be considered. Improving the clients’ favorable attitudes and awareness should be considered. PMID:24554948

The clients' readiness to use mental health care services: Experiences and perceptions from Iranian context.

Science.gov (United States)

Alavi, Mousa; Irajpour, Alireza

2013-11-01

Underutilization of mental health care services has been a challenge for the health care providers for many years. This challenge could be met in part by improving the clients' readiness to use such services. This study aimed to introduce the important aspects of the clients' readiness to use mental health services in the Iranian context. A thematic analysis of in-depth interviews was undertaken using a constant comparative approach. Participants (11 health professionals consisting of 3 physicians, 7 nurses, 1 psychologist, and 5 patients/their family members) were recruited from educational hospitals affiliated with Isfahan University of Medical Sciences, Iran. The credibility and trustworthiness was grounded on four aspects: factual value, applicability, consistency, and neutrality. The study findings uncovered two important aspects of the clients' readiness for utilizing mental health care services. These are described through two themes and related sub-themes: "The clients' awareness" implies the cognitive aspect of readiness and "the clients' attitudes" implies the psychological aspect of readiness, both of which have perceived to cultivate a fertile context through which the clients could access and use the mental health services more easily. For the health care system in Isfahan, Iran to be successful in delivering mental health services, training programs directed to prepare service users should be considered. Improving the clients' favorable attitudes and awareness should be considered.

Multichip module technology for automotive application

Science.gov (United States)

Johnson, R. Wayne; Evans, John L.; Bosley, Larry

1995-01-01

Advancements in multichip module technology are creating design freedoms previously unavailable to design engineers. These advancements are opening new markets for laminate based multichip module products. In particular, material improvements in laminate printed wiring boards are allowing multichip module technology to meet more stringent environmental conditions. In addition, improvements in encapsulants and adhesives are enhancing the capabilities of multichip module technology to meet harsh environment. Furthermore, improvements in manufacturing techniques are providing the reliability improvements necessary for use in high quality electronic systems. These advances are making multichip module technology viable for high volume, harsh environment applications like under-the-hood automotive electronics. This paper will provide a brief review of multichip module technology, a discussion of specific research activities with Chrysler for use of multichip modules in automotive engine controllers and finally a discussion of prototype multichip modules fabricated and tested.

Fission Surface Power Technology Development Update

Science.gov (United States)

Palac, Donald T.; Mason, Lee S.; Houts, Michael G.; Harlow, Scott

2011-01-01

conversion unit with electrical controls, and a heat rejection system with a multi-panel radiator assembly. Testing is planned at the Glenn Research Center Vacuum Facility 6 starting in 2012, with vacuum and liquid-nitrogen cold walls to provide simulation of operationally relevant environments. A nominal two-year test campaign is planned including a Phase 1 reactor simulator and power conversion test followed by a Phase 2 integrated system test with radiator panel heat rejection. The testing is expected to demonstrate the readiness and availability of fission surface power as a viable power system option for NASA's exploration needs. In addition to surface power, technology development work within this project is also directly applicable to in-space fission power and propulsion systems.

Potential commercial applications of centrifuge technology

International Nuclear Information System (INIS)

1985-08-01

As part of an effort to prevent the loss of and maximize the use of unique developments of the centrifuge program, this document identifies and briefly describes unclassified technologies potentially available for transfer. In addition, this document presents a preliminary plan for action needed to carry out the transfer activity. Continuing efforts will provide additional descriptions of technologies which have applications that are not as apparent or as obvious as those presented here. Declassification of some of the program information, now classified as restricted data, would permit the descriptions of additional technologies which have significant commercial potential. The following are major areas of technology where transfer opportunities exist: biomedical; separation; motors and control systems; materials; vacuum; dynamics and balancing; and diagnostics and instrumentation

Society for Promotion of Peaceful Applications of Nuclear in Kenya (SPANS)

International Nuclear Information System (INIS)

2006-01-01

The seminar was organized by the National Council for Science and Technology in collaboration with International Atomic Energy Agency (IAEA) to achieve the following objectives; create public awareness on Peaceful use of Nuclear Science and Technology discuss and adopt the draft constitution for the Society for the Promotion of Nuclear Science in Kenya SPANS (K). The National Council for Science and Technology identified highly qualified resource persons who are competent enough in the area of nuclear applications who prepared relevant topics based on their knowledge and experiences in the field of nuclear science. The presentations covered topics of nuclear applications in the areas of agriculture, health, pollution and a draft of SPANS Constitution. The Council is in the process of compiling and publishing the proceedings whose details will be submitted later to INIS once it is ready

Management assessment of tank waste remediation system contractor readiness to proceed with phase 1B privatization

International Nuclear Information System (INIS)

Honeyman, J.O.

1998-01-01

This Management Assessment of Tank Waste Remediation System (TWRS) Contractor Readiness to Proceed With Phase 1B Privatization documents the processes used to determine readiness to proceed with tank waste treatment technologies from private industry, now known as TWRS privatization. An overall systems approach was applied to develop action plans to support the retrieval and disposal mission of the TWRS Project. The systems and infrastructure required to support the mission are known. Required systems are either in place or plans have been developed to ensure they exist when needed. Since October 1996 a robust system engineering approach to establishing integrated Technical Baselines, work breakdown structures, tank farms organizational structure and configurations, work scope, and costs has become part of the culture within the TWRS Project. An analysis of the programmatic, management, and technical activities necessary to declare readiness to proceed with execution of the mission demonstrates that the system, personnel, and hardware will be on-line and ready to support the private contractors. The systems approach included defining the retrieval and disposal mission requirements and evaluating the readiness of the Project Hanford Management Contract (PHMC) team to support initiation of waste processing by the private contractors in June 2002 and to receive immobilized waste shortly thereafter. The Phase 1 feed delivery requirements from the private contractor Requests for Proposal were reviewed. Transfer piping routes were mapped, existing systems were evaluated, and upgrade requirements were defined

Instructional Alignment of Workplace Readiness Skills in Marketing Education

Science.gov (United States)

Martin, Sarah J.; Reed, Philip A.

2015-01-01

This study examined high school marketing education teachers' knowledge of workplace readiness skills and whether that knowledge had an impact on student workplace readiness skill achievement. Further, this study examined the usage of Virginia's 13 Workplace Readiness Skills curriculum and identified the teaching methods and instructional…

Low temperature plasma technology methods and applications

CERN Document Server

Chu, Paul K

2013-01-01

Written by a team of pioneering scientists from around the world, Low Temperature Plasma Technology: Methods and Applications brings together recent technological advances and research in the rapidly growing field of low temperature plasmas. The book provides a comprehensive overview of related phenomena such as plasma bullets, plasma penetration into biofilms, discharge-mode transition of atmospheric pressure plasmas, and self-organization of microdischarges. It describes relevant technology and diagnostics, including nanosecond pulsed discharge, cavity ringdown spectroscopy, and laser-induce

Advances in control system technology for aerospace applications

CERN Document Server

2016-01-01

This book is devoted to Control System Technology applied to aerospace and covers the four disciplines Cognitive Engineering, Computer Science, Operations Research, and Servo-Mechanisms. This edited book follows a workshop held at the Georgia Institute of Technology in June 2012, where the today's most important aerospace challenges, including aerospace autonomy, safety-critical embedded software engineering, and modern air transportation were discussed over the course of two days of intense interactions among leading aerospace engineers and scientists. Its content provide a snapshot of today's aerospace control research and its future, including Autonomy in space applications, Control in space applications, Autonomy in aeronautical applications, Air transportation, and Safety-critical software engineering.

Applications of electron beam technology for healthcare and environment

International Nuclear Information System (INIS)

Varshney, Lalit

2013-01-01

Radiation technology has matured from lab scale to industrial scale in many areas of interests to industry, healthcare, agriculture and environment. Some of the well established applications include radiation sterilization, wires and cable, composites for automobiles, radiation surface curing, nanomaterials, hydrogels and special materials for nuclear and aerospace industry, radiation treatment of effluents, sewage sludge etc. These applications are as a result of characteristics of high energy radiation like gamma and electron beams which are able to deliver energy directly at molecular level. Unlike nuclear based radiations, electron beam accelerator technology is amenable to easy acceptance by public as well has capability to manipulate processes and product treatment to produce varieties of advanced/smart materials for healthcare and environment. Faster dose rates and depth profiling are the important characteristics of electron beam technology which gives it an edge over gamma radiation processing. Department of Atomic Energy has an ambitious program to indigenously develop accelerator technology and utilize them for national progress. In the presentation some important applications of radiation technology will be discussed. (author)

Semiconductor radiation detectors technology and applications

CERN Document Server

2018-01-01

The aim of this book is to educate the reader on radiation detectors, from sensor to read-out electronics to application. Relatively new detector materials, such as CdZTe and Cr compensated GaAs, are introduced, along with emerging applications of radiation detectors. This X-ray technology has practical applications in medical, industrial, and security applications. It identifies materials based on their molecular composition, not densities as the traditional transmission equipment does. With chapters written by an international selection of authors from both academia and industry, the book covers a wide range of topics on radiation detectors, which will satisfy the needs of both beginners and experts in the field.

What Are the ACT College Readiness Benchmarks? Information Brief

Science.gov (United States)

ACT, Inc., 2013

2013-01-01

The ACT College Readiness Benchmarks are the minimum ACT® college readiness assessment scores required for students to have a high probability of success in credit-bearing college courses--English Composition, social sciences courses, College Algebra, or Biology. This report identifies the College Readiness Benchmarks on the ACT Compass scale…

18 CFR 5.22 - Notice of acceptance and ready for environmental analysis.

Science.gov (United States)

2010-04-01

... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Notice of acceptance and ready for environmental analysis. 5.22 Section 5.22 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER THE FEDERAL POWER ACT INTEGRATED LICENSE APPLICATION PROCESS § 5.22 Notice o...

Application of new technology to SMART instrumentation and control systems

International Nuclear Information System (INIS)

Park, Heui Youn; Lee, C. K.; Kim, D. H.; Suh, Y. S.; Hur, S.; Seong, S. H.; Jang, G. S.; Koo, I. S.; Chang, M. H.

1998-03-01

It is very important to examine the conformance with licensing requirements and standards when new digital technology and equipment apply to nuclear plants. Key requirements of licensing on digitalisation using new technologies are software and hardware V and V, reliability of communication network, and diversity and defence-in-depth concept against common mode failures of hardware and software. And it should be also evaluated whether the selection and application of new technology comply with the design concept and requirements of SMART MMIS or not. In this report, we reviewed digitalisation materials such as EPRI's ALWR utility requirements document, I and C upgrade plan, guideline on licensing digital upgrades, and IAEA's issues and approaches to plant modernization to explore application method on new I and C technologies, and evaluated the state of applicable new technologies for SMART MMIS which are selected from the technologies, methods, and manuals of the industrial area. (author). 36 refs., 15 tabs

Application of new technology to SMART instrumentation and control systems

Energy Technology Data Exchange (ETDEWEB)

Park, Heui Youn; Lee, C. K.; Kim, D. H.; Suh, Y. S.; Hur, S.; Seong, S. H.; Jang, G. S.; Koo, I. S.; Chang, M. H

1998-03-01

It is very important to examine the conformance with licensing requirements and standards when new digital technology and equipment apply to nuclear plants. Key requirements of licensing on digitalisation using new technologies are software and hardware V and V, reliability of communication network, and diversity and defence-in-depth concept against common mode failures of hardware and software. And it should be also evaluated whether the selection and application of new technology comply with the design concept and requirements of SMART MMIS or not. In this report, we reviewed digitalisation materials such as EPRI`s ALWR utility requirements document, I and C upgrade plan, guideline on licensing digital upgrades, and IAEA`s issues and approaches to plant modernization to explore application method on new I and C technologies, and evaluated the state of applicable new technologies for SMART MMIS which are selected from the technologies, methods, and manuals of the industrial area. (author). 36 refs., 15 tabs.

Intelligent control and automation technology for nuclear applications

International Nuclear Information System (INIS)

Kim, Jae Hui; Huh, Young Hwan; Lee, Jang Soo; Kim, Ko Ryeo; Cha, Kyoung Ho; Lee, Jae Cheol; Dong, In Sook

1993-01-01

This project intends to establish the basic technology of intelligent control and automation to be applied to the next generation nuclear plant. For that, the research status of those technologies is surveyed for various application areas at first. The characteristics and availability of those techniques such as neural network, fuzzy rule based control and reasoning, multimedia, real-time software and qualitative modelling are studied through a series of simulations and experiments. By integrating each technologies studied above, we developed a hierarchical, intelligent control system for an autonomous mobile robot as a test bed. The system is composed of several modules of software and hardware subsystems, which are implemented by use of the intelligent techniques. Through the analysis of the results and experiences, we investigated the feasibility of application of the basic technology to the next generation plant. (Author)

Applications of Blockchain Technology beyond Cryptocurrency

Directory of Open Access Journals (Sweden)

Mahdi H. Miraz

2018-01-01

Full Text Available Blockchain (BC, the technology behind the Bitcoin crypto-currency system, is considered to be both alluring and critical for ensuring enhanced security and (in some implementations, non-traceable privacy for diverse applications in many other domains - including in the Internet of Things (IoT eco-system. Intensive research is currently being conducted in both academia and industry applying the Blockchain technology in multifarious applications. Proof-of-Work (PoW, a cryptographic puzzle, plays a vital rôle in ensuring BC security by maintaining a digital ledger of transactions, which is considered to be incorruptible. Furthermore, BC uses a changeable Public Key (PK to record the users’ identity, which provides an extra layer of privacy. Not only in cryptocurrency has the successful adoption of BC been implemented but also in multifaceted non-monetary systems such as in: distributed storage systems, proof-of-location, healthcare, decentralized voting and so forth. Recent research articles and projects/applications were surveyed to assess the implementation of BC for enhanced security, to identify associated challenges and to propose solutions for BC enabled enhanced security systems.

Application of plasma technology to nuclear engineering fields

International Nuclear Information System (INIS)

Suzuki, Masaaki; Akatsuka, Hiroshi

1996-01-01

In order to discuss about the application of the plasma technology to nuclear engineering fields, we mention two subjects, the oxygenation of metal chloride waste by oxygen plasma and the characterization of fine particles generated in the plasma process. Through the experimental results of two subjects, both of the advantage and the disadvantage of the plasma technology and their characteristics are shown and discussed. The following conclusions are obtained. The reactive plasma is effective to oxygenate the chloride wastes. The particle generation which is one of the disadvantages must not be specialized and its characteristics can be estimated. Consequently, the plasma technology should be applicable to nuclear engineering fields adopting its advantage and overcoming its disadvantage. (author)

Electricity market readiness plan : Ontario Energy Board

International Nuclear Information System (INIS)

2001-03-01

This document informs electric power market participants of the Ontario Energy Board's newly developed market readiness plan and target timelines that local distribution companies (LDCs) must meet for retail marketing. The Ontario Energy Board's plan incorporates relevant independent market operator (IMO)-administered market milestones with retail market readiness targeted for September 2001. The market readiness framework involves a self-certification process for LDCs by August 10, 2001, through which the Board will be able to monitor progress and assess the feasibility of meeting the target timelines. For retail market readiness, all LDCs will have to calculate settlement costs, produce unbundled bills, provide standard supply service, change suppliers and accommodate retail transactions. LDCs must be either authorized participants in the IMO-administered market or become retail customers of their host LDC. Unbundled bills will include itemized charges for energy price, transmission, distribution and debt retirement charge. 1 tab., 1 fig

Application of radionuclides in nuclear technology