WorldWideScience

Sample records for technologies workshop held

  1. Proceedings of the Antiproton Technology Workshop Held in Upton, New York on 10 May 1989

    Science.gov (United States)

    1989-05-01

    Edwards Air Force Base, California 93523-5000 mm~mmmmmmmml mmIl.• ml l iJ m NOTICE When U.S. Government drawings, specifications, or other data are...before at these meetings, ASTER, named after the wildflower . Since I am limited to about ten minutes, I will keep my talk simple. Here is the outline...CALLAS JET PROPULSION LABORATORY CALIFORNIA INSTITUTE OF TECHNOLOGY PASADENA, CA PRESENTED AT THE ANTIPROTON TECHNOLOGY WORKSHOP HELD AT BROOKHAVEN

  2. IFAN Workshop Held in Beijing

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ IFAN, International Federation of Standards Users, was pleased to held its workshop on "Application of Standards in China and Beyond" connected with its annual members' assembly meeting on 25~26 October, 2006 in Beijing. The objective of the workshop is to use the opportunity of being in China to achieve a deeper level of understanding of Chinese and non-Chinese standards; to exchange views and information on the application of standards (Benefits and Challenges); and to study more profoundly the standardization and technical regulation system in China.

  3. A Workshop on Environmental Technology Assessment Held at the University of Cambridge, England Held on 24-26 April, 1985,

    Science.gov (United States)

    1985-01-01

    for Air Pollutants J J Stukel Economic Issues in the Control of Air Pollution I M Torrens Theme 2 Water Treatment Megatrends in Water Treatment...TECHNOLOGY ASSESSMENTS -c -e ne>±- a- University of Cambridge, England April 24-26, 1985 MEGATRENDS IN NATER TREATMENT TECHNOLOGIES F’. Fiessinaer, J... tourism caused load varia- •-s and agro-industry discharges could and should be controled cnemicals addition within the mechanical biological process

  4. Aerospace Materials and Process Technology Reinvestment Workshop Held in Dayton, Ohio on 18-19 May 1993.

    Science.gov (United States)

    1993-05-19

    Support Division Overview "* Key Personnel for Technology Transfer "* Topics for Technoilogy Transfer Aerospace Materials and Processes Mobile ...Automated] Technology Reinvestment Workshop I Scanner Large Area Composite Inspection - Mobile Automated Scanner "• Recdy for Transition Advanced Development

  5. Hydrogen Technology Education Workshop Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    None

    2002-12-01

    This document outlines activities for educating key target audiences, as suggested by workshop participants. Held December 4-5, 2002, the Hydrogen Technology Education Workshop kicked off a new education effort coordinated by the Hydrogen, Fuel Cells, & Infrastructure Technologies Program of the Office of Energy Efficiency and Renewable Energy.

  6. Integrated Technology Rotor Methodology Assessment Workshop Held in Moffett Field, California on 21-22 Jun 1983

    Science.gov (United States)

    1988-06-01

    that most of us recognize this, ij a set of data for problems that we have a lot of confidence about the answer. We should now have some benchmarks to... benchmark we all look to. There are some similarities with what we’ve done at this workshop and there are some differences. in 󈨎 we looked at just... Boxwell William White Bob Canfield Frank Caradonna U.S. ARMY RESEARCH & TECHNOLOGY Marcelo Crespo Da Silva LABORATORIES John Davis Andrew W. Kerr Seth

  7. Proceedings: USA-CERL Technology Transfer (T2) Workshop Held in Urbana, Illinois on December 15-16 1986.

    Science.gov (United States)

    1988-03-01

    forth in Army Regulation (AR) 70-57 and the Stevenson -Wydler Act of 1980. Publication of these proceedings was an initiative of the USA-CERL Commander and...Boulder, CO: Westview Press, 1979. U.S. Congress, House of Representatives, Committee on Science and Technology, Stevenson -Wydler Technology...Composting latrines are large chambers in which wastes and organic bulking agents are "’’ i placed for biological and physical breakdown into humus -like

  8. Workshop on Surface Science and Technology Held in Ann Arbor, Michigan on 7-9 November 1990

    Science.gov (United States)

    1992-03-01

    37 Waber-Hydrogen Permeation and Positron Annihilation Study of Alpha Iron Crystals ....... 38 Was---Ion Beam Analysis of Surfaces and...Annihilation Study of Alpha Iron Crystals James T. Waber Physics Department I Michigan Technological University Houghton, Michigan 1 Dislocation

  9. Heterostructure Technology Workshop Held in Cardiff School of Engineering, University of Wales Cardiff on 17-19 September 1995,

    Science.gov (United States)

    1995-09-19

    growth of epitaxial germanium layers on Si(100) substrates is of great interest, as subsequent CdTe epilayers adopt a (100) orientation as opposed...on silicon , where the CdTe serves as a buffer layer for the growth of high quality MCT. Therefore, the technology developed for Si processing can be...of HBTs at high power is fundamentally limited by excessive internal heating within the device. Negative differential resistivity ( NDR ) is generally

  10. CNAL Held International Proficiency Testing Workshop On Animal Quarantine

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    @@ From 14th to 16th, July 2004, CNAL held International Proficiency Testing Workshop on Animal Quarantine in TianJin, China. Approximately 50 experts from AQSIQ (General Administration of Quality Supervision, Inspection & Quarantine of the People's Republic of China) and Ministry of Agriculture who are engaged in the technical and management activities of animal quarantine laboratories attended the workshop.

  11. 77 FR 55482 - Public Workshop on Marine Technology and Standards

    Science.gov (United States)

    2012-09-10

    ... Arlington, VA. This public workshop will provide a unique opportunity for classification societies, industry... technological impacts on the marine industry, corresponding coverage in related codes and standards, and... register for the workshop. ADDRESSES: The workshop will be held at The Double Tree by Hilton Hotel, in...

  12. Research and Technology Transfer Ion Implantation Technology for Specialty Materials: Proceedings of a Joint Workshop Held in Knoxville, Tennessee on 26-27 October 1989

    Science.gov (United States)

    1991-02-01

    Options from the Perspective of a SWall Business, Dr. Ralph B. Alexander, President, Ion Surface Tecnology , Inc. 9:45 &wort MedAniwm for Standards D[vel...implantation technologies, including the technology push /pull issue, psychological issues, competing technologies and relative costs; (2) implementation options...most advantageous method would depend on the specific ap- plication. The issue of technology push /pull, i.e. push from the develo- pers/researchers/ion

  13. Proceedings of the Nuclear Criticality Technology and Safety Project Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez, R.G. [comp.

    1994-01-01

    This report is the proceedings of the annual Nuclear Criticality Technology and Safety Project (NCTSP) Workshop held in Monterey, California, on April 16--28, 1993. The NCTSP was sponsored by the Department of Energy and organized by the Los Alamos Critical Experiments Facility. The report is divided into six sections reflecting the sessions outlined on the workshop agenda.

  14. New technology integration planning workshop

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    Purpose of the Workshop was to provide guidance, reflecting electric utility industry viewpoints, for developing and directing its research and development program structures to facilitate the integration of new energy technologies into electric utility systems. The Workshop was structured to directly elicit the positions and viewpoints representative of electric utility companies.

  15. Ideas from Future Technologies Workshop Held by ARL/TARDEC in Aberdeen Proving Ground, Maryland on 9-11 June, 1993

    Science.gov (United States)

    1994-08-01

    disks, or by homopolar motor technology. Sufficient space must be provided between layers to accommodate magnets, coils, cables, or other components...Phase Change Materials for Passive Thermal Energy Storage . . . . . . . . . . . . . . . . . Motor Signature Analysis Applied to Tank...adiabatic engine (5.2) or composite engine and transmission parts (3.3); the use of motor signature analysis (5.5) or chaotic time series analysis (5.8) to

  16. Grand Challenges of Advanced Computing for Energy Innovation Report from the Workshop Held July 31-August 2, 2012

    Energy Technology Data Exchange (ETDEWEB)

    Larzelere, Alex R.; Ashby, Steven F.; Christensen, Dana C.; Crawford, Dona L.; Khaleel, Mohammad A.; John, Grosh; Stults, B. Ray; Lee, Steven L.; Hammond, Steven W.; Grover, Benjamin T.; Neely, Rob; Dudney, Lee Ann; Goldstein, Noah C.; Wells, Jack; Peltz, Jim

    2013-03-06

    On July 31-August 2 of 2012, the U.S. Department of Energy (DOE) held a workshop entitled Grand Challenges of Advanced Computing for Energy Innovation. This workshop built on three earlier workshops that clearly identified the potential for the Department and its national laboratories to enable energy innovation. The specific goal of the workshop was to identify the key challenges that the nation must overcome to apply the full benefit of taxpayer-funded advanced computing technologies to U.S. energy innovation in the ways that the country produces, moves, stores, and uses energy. Perhaps more importantly, the workshop also developed a set of recommendations to help the Department overcome those challenges. These recommendations provide an action plan for what the Department can do in the coming years to improve the nation’s energy future.

  17. Facility decontamination technology workshop

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-10-01

    Purpose of the meeting was to provide a record of experience at nuclear facilities, other than TMI-2, of events and incidents which have required decontamination and dose reduction activities, and to furnish GPU and others involved in the TMI-2 cleanup with the results of that decontamination and dose reduction technology. Separate abstracts were prepared for 24 of the 25 papers; the remaining paper had been previously abstracted. (DLC)

  18. Workshop held at Johns Hopkins University, March 2013

    CERN Document Server

    2013-01-01

    Cyber-physical systems (CPS) involve deeply integrated, tightly coupled computational and physical components. These systems, spanning multiple scientific and technological domains, are highly complex and pose several fundamental challenges. They are also critically important to society’s advancement and security. The design and deployment of the adaptable, reliable CPS of tomorrow requires the development of a basic science foundation, synergistically drawing on various branches of engineering, mathematics, computer science, and domain specific knowledge.   This book brings together 19 invited papers presented at the Workshop on Control of Cyber-Physical Systems, hosted by the Department of Electrical & Computer Engineering at The Johns Hopkins University in March 2013. It highlights the central role of control theory and systems thinking in developing the theory of CPS, in addressing the challenges of cyber-trust and cyber-security, and in advancing emerging cyber-physical applications ranging from s...

  19. NRSE technologies and trends workshop

    Energy Technology Data Exchange (ETDEWEB)

    Seo, W.S.; Lee, T.K.; Jo, D.K.; Jeong, M.W.; Kim, H.W.; Yoon, K.S. [Korea Inst. of Energy Research, Taejon (Korea, Republic of)

    1995-12-01

    The object of this workshop are to exchange scientific knowledge of exports, to collect the information on the current research trends and policies through the presentations of NRSE technologies and their case studies both at home and aboard. Another objects are to promote the international cooperation in the field of new and renewable energy research, and to provide a chance for taking new technologies to industries for the practical use or for commercialization. Research and development trends in NRSE technologies by major research institutions are investigated to make a comparative review as a reference for the future NRSE projects. Coupled with the government`s`s NRSE development policy, it has played an important role to make an increased public relations with the general public with respect to the development necessity of NRSE. The forum was very useful for an increased exchange of views on NRSE technologies of mutual interest between NRSE lectures and participants. (author)

  20. Report on a Cannon Net Trap Workshop Held at Swan Lake National Wildlife Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The following is a report of material covered during a workshop on cannon net trapping and banding held at the Swan Lake National Wildlife Refuge, Sumner, Missouri,...

  1. International Conference on Computer Aided Design, Manufacture and Operation in the Marine and Offshore Industries (5th), Incorporating the Ice Technology Workshop (4th) Held in Southampton, United Kingdom on September 13-16, 1994.

    Science.gov (United States)

    ship propulsion . A bridging section on vessels and structures in ice, leads to the second part which is devoted to ice technology. Again, Part II contains some of the papers presented at the fourth meeting on Ice Technology (ITC 94), convened as a workshop during 15th and 16th September. The second part of the book contains sections on ice properties and modelling, as well as ice and ocean

  2. The ICT Landscape in BRICS Countries: Lessons from Emerging Technologies (R&D, Innovation and Trade): Proceedings of the Second International Workshop held in Johannesburg, South Africa, on 5 October, 2011

    OpenAIRE

    Jean Paul Simon

    2013-01-01

    The Information Society Unit of the JRC-IPTS has been investigating the Information and Communication Technology (ICT) sector and its R&D in Asia for several years as an extension of the PREDICT research project. The workshop was organised as part of this on-going research to gather the most recent information on the growing role of BRICs Countries in the IT sector.

  3. Flywheel Energy Storage technology workshop

    Energy Technology Data Exchange (ETDEWEB)

    O`Kain, D.; Howell, D. [comps.

    1993-12-31

    Advances in recent years of high strength/lightweight materials, high performance magnetic bearings, and power electronics technology has spurred a renewed interest by the transportation, utility, and manufacturing industries in Flywheel Energy Storage (FES) technologies. FES offers several advantages over conventional electro-chemical energy storage, such as high specific energy and specific power, fast charging time, long service life, high turnaround efficiency (energy out/energy in), and no hazardous/toxic materials or chemicals are involved. Potential applications of FES units include power supplies for hybrid and electric vehicles, electric vehicle charging stations, space systems, and pulsed power devices. Also, FES units can be used for utility load leveling, uninterruptable power supplies to protect electronic equipment and electrical machinery, and for intermittent wind or photovoltaic energy sources. The purpose of this workshop is to provide a forum to highlight technologies that offer a high potential to increase the performance of FES systems and to discuss potential solutions to overcome present FES application barriers. This document consists of viewgraphs from 27 presentations.

  4. BCI meeting 2005--workshop on technology: hardware and software.

    Science.gov (United States)

    Cincotti, Febo; Bianchi, Luigi; Birch, Gary; Guger, Christoph; Mellinger, Jürgen; Scherer, Reinhold; Schmidt, Robert N; Yáñez Suárez, Oscar; Schalk, Gerwin

    2006-06-01

    This paper describes the outcome of discussions held during the Third International BCI Meeting at a workshop to review and evaluate the current state of BCI-related hardware and software. Technical requirements and current technologies, standardization procedures and future trends are covered. The main conclusion was recognition of the need to focus technical requirements on the users' needs and the need for consistent standards in BCI research.

  5. Enterprise Systems and Technology, Proceedings of the 2nd International Workshop on Enterprise Systems and Technology - I-WEST 2008

    NARCIS (Netherlands)

    Cordeiro, J.; van Sinderen, Marten J.; Shishkov, Boris

    This volume contains the proceedings of the Second International Workshop on Enterprise Systems and Technology (I-WEST 2008), held on May 23 in Enschede, The Netherlands. The I-WEST workshop is a scientific event of IICREST, the Interdisciplinary Institute for Collaboration and Research on

  6. Enterprise Systems and Technology, Proceedings of the 2nd International Workshop on Enterprise Systems and Technology - I-WEST 2008

    NARCIS (Netherlands)

    Cordeiro, J.; van Sinderen, M.J.; Shishkov, B.B.

    2008-01-01

    This volume contains the proceedings of the Second International Workshop on Enterprise Systems and Technology (I-WEST 2008), held on May 23 in Enschede, The Netherlands. The I-WEST workshop is a scientific event of IICREST, the Interdisciplinary Institute for Collaboration and Research on Enterpris

  7. Proceedings of the 1993 oil heat technology conference and workshop

    Energy Technology Data Exchange (ETDEWEB)

    McDonald, R.J.

    1993-09-01

    This report documents the proceedings of the 1993 Oil Heat Technology Conference and Workshop, held on March 25--26 at Brookhaven National Laboratory (BNL), and sponsored by the US Department of Energy - Office of Building Technologies (DOE-OBT), in cooperation with the Petroleum Marketers Association of America. This Conference, which was the seventh held since 1984, is a key technology-transfer activity supported by the ongoing Combustion Equipment Technology (Oil-Heat R&D) program at BNL, and is aimed at providing a forum for the exchange of information among international researchers, engineers, manufacturers, and marketers of oil-fired space- conditioning equipment. Selected papers have been processed separately for inclusion in the Energy Science and Technology Database.

  8. Technology Evaluation Workshop Report for Tank Waste Chemical Characterization

    Energy Technology Data Exchange (ETDEWEB)

    Eberlein, S.J.

    1994-04-01

    A Tank Waste Chemical Characterization Technology Evaluation Workshop was held August 24--26, 1993. The workshop was intended to identify and evaluate technologies appropriate for the in situ and hot cell characterization of the chemical composition of Hanford waste tank materials. The participants were asked to identify technologies that show applicability to the needs and good prospects for deployment in the hot cell or tanks. They were also asked to identify the tasks required to pursue the development of specific technologies to deployment readiness. This report describes the findings of the workshop. Three focus areas were identified for detailed discussion: (1) elemental analysis, (2) molecular analysis, and (3) gas analysis. The technologies were restricted to those which do not require sample preparation. Attachment 1 contains the final workshop agenda and a complete list of attendees. An information package (Attachment 2) was provided to all participants in advance to provide information about the Hanford tank environment, needs, current characterization practices, potential deployment approaches, and the evaluation procedure. The participants also received a summary of potential technologies (Attachment 3). The workshop opened with a plenary session, describing the background and issues in more detail. Copies of these presentations are contained in Attachments 4, 5 and 6. This session was followed by breakout sessions in each of the three focus areas. The workshop closed with a plenary session where each focus group presented its findings. This report summarizes the findings of each of the focus groups. The evaluation criteria and information about specific technologies are tabulated at the end of each section in the report. The detailed notes from each focus group are contained in Attachments 7, 8 and 9.

  9. DOE UST interim subsurface barrier technologies workshop

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1992-09-01

    This document contains information which was presented at a workshop regarding interim subsurface barrier technologies that could be used for underground storage tanks, particularly the tank 241-C-106 at the Hanford Reservation.

  10. IsoBank workshop held at IsoEcol10 - University of Tokyo 2016

    OpenAIRE

    Hayden, Brian

    2016-01-01

    IsoBank is a repository for stable isotope values and relevant metadata. These slides were presented at a workshop held during IsoEcol10 to refine and design the IsoBank for the needs of a diverse group of researchers.

  11. Proceedings of the 1997 oil heat technology conference and workshop

    Energy Technology Data Exchange (ETDEWEB)

    McDonald, R.J.

    1997-09-01

    This report documents the Proceedings of the 1997 Oil Heat Technology Conference and Workshop, held on April 3--4 at Brookhaven National Laboratory (BNL), and sponsored by the US Department of Energy--Office of Building Technologies, State and Community programs (DOE-BTS), in cooperation with the Petroleum Marketers Association of America (PMAA). This Conference is a key technology transfer activity supported by the ongoing Combustion Equipment Technology (Oil-Heat R and D) program at BNL, and is aimed at providing a forum for the exchange of information among international researchers, engineers, manufacturers, and marketers of oil-fired space-conditioning equipment. The objectives of the Conference were to: identify and evaluate the state-of-the-art and recommend new initiatives for higher efficiency, a cleaner environment, and to satisfy consumer needs cost-effectively, reliably, and safely: and foster cooperation among federal and industrial representatives with the common goal of sustained national economic growth and energy security via energy conservation. The 1997 Oil Technology Conference comprised: (a) five plenary sessions devoted to presentations and summations by public and private sector industry representatives from the US, and Canada, and (b) four workshops which focused on mainstream issues in oil-heating technology. This book contains 14 technical papers and four summaries from the workshops. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  12. Proceedings of the 1995 oil heat technology conference and workshop

    Energy Technology Data Exchange (ETDEWEB)

    McDonald, R.J.

    1995-04-01

    This report documents the Proceedings of the 1995 Oil Heat Technology Conference and Workshop, held on March 22-23 at Brookhaven National Laboratory (BNL), and sponsored by the U.S. Department of Energy - Office of Building Technologies (DOE-OBT), in cooperation with the Petroleum Marketers Association of America. This Conference, which was the ninth held since 1984, is a key technology transfer activity supported by the ongoing Combustion Equipment Technology (Oil-Heat R&D) program at BNL, and is aimed at providing a forum for the exchange of information among international researchers, engineers, manufacturers, and marketers of oil-fired space-conditioning equipment. The objectives of the Conference were to: (1) Identify and evaluate the state-of-the-art and recommend new initiatives for higher efficiency, a cleaner environment, and to satisfy consumer needs cost-effectively, reliably, and safely; (2) Foster cooperation among federal and industrial representatives with the common goal of sustained national economic growth and energy security via energy conservation. The 1995 Oil Technology Conference comprised: (a) three plenary sessions devoted to presentations and summations by public and private sector industry representatives from the United States, and Canada, and (b) four workshops which focused on mainstream issues in oil-heating technology. Individual reports presented at the conference have been processed separately for database entry.

  13. Recent trend in coal utilization technology. Coal utilization workshop

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Chon Ho; Son, Ja Ek; Lee, In Chul; Jin, Kyung Tae; Kim, Seong Soo [Korea Inst. of Energy Research, Taejon (Korea, Republic of)

    1995-12-01

    The 11th Korea-U.S.A. joint workshop on coal utilization technology was held in somerset, Pennsylvania, U.S.A. from october 2 to 3, 1995. In the opening ceremony, Dr.C. Low-el Miller, associate deputy assistant secretary of office of clean coal technology, U.S.DOE, gave congratulatory remarks and Dr. Young Mok Son, president of KIER, made a keynote address. In this workshop, 30 papers were presented in the fields of emission control technology, advanced power generation systems, and advanced coal cleaning and liquid fuels. Especially, from the Korean side, not only KIER but also other private research institutes and major engineering companies including KEPCO, Daewoo Institute of Construction Technology, Jindo Engineering and Construction Co. Daewoo Institute for Advanced Engineering and universities participated in this workshop, reflecting their great interests. Attendants actively discussed about various coal utilization technologies and exchanged scientific and technical information on the state-of-art clean coal technologies under development. (author)

  14. 8th Cambridge Workshop on Universal Access and Assistive Technology

    CERN Document Server

    Lazar, Jonathan; Heylighen, Ann; Dong, Hua

    2016-01-01

    This book presents the proceedings of the 8th Cambridge Workshop on Universal Access and Assistive Technology (CWUAAT '14), incorporating the 11th Cambridge Workshop on Rehabilitation Robotics, held in Cambridge, England in March 2016. It presents novel and state-of-the-art research from an international group of leaders in the fields of universal access and assistive technology. It explores various issues including the reconciliation of usability, accessibility and inclusive design, the design of inclusive assistive and rehabilitation systems, measuring product demand and human capabilities, data mining and visualizing inclusion, legislation in inclusive design, and situational inclusive interfaces (automotive and aerospace). This book provides an invaluable resource to researchers, postgraduates, design practitioners, therapists and clinical practitioners, as well as design teachers.

  15. TECHNOLOGY REQUIREMENTS FOR IN SITU DECOMMISSIONING WORKSHOP REPORT

    Energy Technology Data Exchange (ETDEWEB)

    Jannik, T.; Lee, P.; Gladden, J.; Langton, C.; Serrato, M.; Urland, C.; Reynolds, E.

    2009-06-30

    In recognition of the increasing attention being focused on In Situ Decommissioning (ISD or entombment) as an acceptable and beneficial decommissioning end state, the Department of Energy's (DOE) Office of Environmental Management (EM) is developing guidance for the implementation of ISD of excess facilities within the DOE complex. Consistent with the overarching DOE goals for increased personnel and environmental safety, reduced technical uncertainties and risks, and overall gains in efficiencies and effectiveness, EM's Office of Deactivation and Decommissioning and Facility Engineering (EM-23) initiated efforts to identify the technical barriers and technology development needs for the optimal implementation of ISD. Savannah River National Laboratory (SRNL), as the EM Corporate Laboratory, conducted an ISD Technology Needs Workshop to identify the technology needs at DOE sites. The overall goal of the workshop was to gain a full understanding of the specific ISD technical challenges, the technologies available, and those needing development. The ISD Workshop was held December 9-10, 2008 in Aiken, SC. Experienced decommissioning operations personnel from Richland Operations Office (RL), Idaho National Laboratory (INL) and Savannah River Site (SRS) along with scientists and engineers specific expertise were assembled to identify incremental and 'game changing' solutions to ISD technology challenges. The workshop and follow-up activities yielded 14 technology needs statements and the recommendation that EM-23 prioritize and pursue the following specific technology development and deployment actions. For each action, the recommended technology acquisition mechanisms (competitive solicitation (CS) or direct funding (TCR)) are provided. Activities that are time critical for ISD projects, or require unique capabilities that reside in the DOE Laboratory system will be funded directly to those institutions. Activities that have longer lead times and

  16. Ten-Year Anniversary Workshop Young Scientists Summer Held in Beijing of NSFC-IIASA Program

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    On September 12th, 2012, Ten-Year Anniversary Workshop of NSFC-IIASA Young Scientists Sum- mer Program (YSSP) was held in NSFC. On behalf of the NSFC, Vice President, Prof. Wang Jie deliv- ered a speech at the opening ceremony. 50 or so participants including 4 scholars from the International In- stitute for Applied Systems Analysis (IIASA), researchers from relevant Chinese universities and institu- tions, representatives of the Bureau of International Cooperation and Department of Management Sciences of NSFC, attended the workshop.

  17. Proceedings of the 1991 Oil Heat Technology Conference and Workshop

    Energy Technology Data Exchange (ETDEWEB)

    McDonald, R.J.

    1992-07-01

    This Conference, which was the sixth held since 1984, is a key technology-transfer activity supported by the ongoing Combustion Equipment Technology program at BNL, and is aimed at providing a forum for the exchange of information among international researchers, engineers, manufacturers, and marketers of oil-fired space-conditioning equipment. The objectives of the Conference were to: Identify and evaluate the state-of-the-art and recommend; new initiatives to satisfy consumer needs cost-effectively, reliably, and safely; Foster cooperation among federal and industrial representatives with the common goal of national security via energy conservation. The 1991 Oil Technology Conference comprised: (a) two plenary sessions devoted to presentations and summations by public and private sector representatives from the United States, Europe, and Canada; and, (b) four workshops which focused on mainstream issues in oil-heating technology. Selected papers have been processed separately for inclusion in the Energy Science and Technology Database.

  18. Pressurized fluidized-bed combustion technology exchange workshop

    Energy Technology Data Exchange (ETDEWEB)

    ,

    1980-04-01

    The pressurized fluidized-bed combustion technology exchange workshop was held June 5 and 6, 1979, at The Meadowlands Hilton Hotel, Secaucus, New Jersey. Eleven papers have been entered individually into EDB and ERA. The papers include reviews of the US DOE and EPRI programs in this area and papers by Swedish, West German, British and American organizations. The British papers concern the joint program of the USA, UK and FRG at Leatherhead. The key factor in several papers is the use of fluidized bed combustors, gas turbines, and steam turbines in combined-cycle power plants. One paper examines several combined-cycle alternatives. (LTN)

  19. Proceedings of the workshop on severe accident research held in Japan (SARJ-97)

    Energy Technology Data Exchange (ETDEWEB)

    Sugimoto, Jun [ed.

    1998-05-01

    The Workshop on Severe Accident Research held in Japan (SARJ-97) was taken place at Pacifico Yokohama on October 6 - 8, 1997, and attended by 180 participants from 15 countries and one international organizations. The 59 papers, which cover wide areas of severe accident research both in experiments and analysis, such as in-vessel melt retention, fuel-coolant interaction, fission products behavior, structural integrity, containment behavior, computer simulations, and accident management, are indexed individually. (J.P.N.)

  20. Proceedings of the workshop on severe accident research held in Japan (SARJ-98)

    Energy Technology Data Exchange (ETDEWEB)

    Sugimoto, Jun [ed.

    1999-07-01

    The Workshop on Severe Accident Research held in Japan (SARJ-98) was taken place at Hotel Lungwood on November 4-6, 1998, and attended by 181 participants from 13 countries. The 63 papers, which cover wide areas of severe accident research both in experiments and analyses, such as in-vessel melt retention, fuel-coolant interaction, fission products behavior, structural integrity, containment behavior, computer simulations, and accident management, are indexed individually. (J.P.N.)

  1. Value of genetic and genomic technologies: workshop summary

    National Research Council Canada - National Science Library

    Wizemann, Theresa M; Berger, Adam C

    2010-01-01

    .... The IOM's Roundtable on Translating Genomic-Based Research for Health held a workshop on March 22, 2010, to bring together diverse perspectives on the value of genetic testing, and to discuss its use...

  2. GAIN Technology Workshops Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    Braase, Lori Ann [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-08-01

    National and global demand for nuclear energy is increasing and United States (U.S.) global leadership is eroding. There is a sense of urgency with respect to the deployment of the innovative nuclear energy technologies. The Gateway for Accelerated Innovation in Nuclear (GAIN) initiative is based on the simultaneous achievement of three strategic goals. The first is maintaining global technology leadership within the U.S. Department of Energy (DOE). The second is enabling global industrial leadership for nuclear vendors and suppliers. The third is focused on utility optimization of nuclear energy within the clean energy portfolio. An effective public-private partnership is required to achieve these goals. DOEs recognizes the recent sense of urgency new developers and investors have in getting their concepts to market. They know that time to market for nuclear technology takes too long and the facilities needed to conduct the necessary research, development and demonstration (RD&D) activities are very expensive to develop and maintain. Early technologies, in the lower technology readiness levels (TRL) need materials testing, analysis, modeling, code development, etc., most of which currently exists in the DOE national laboratory system. However, mature technologies typically need large component testing and demonstration facilities, which are expensive and long-lead efforts. By understanding the needs of advanced nuclear technology developers, GAIN will connect DOE national laboratory capabilities (e.g., facilities, expertise, materials, and data) with industry RD&D needs. In addition, GAIN is working with the Nuclear Regulatory Commission (NRC) to streamline processes and increase understanding of the licensing requirements for advanced reactors.

  3. Geosciences Information for Teachers (GIFT) Workshops held in Conjunction with Alexander von Humboldt (AvH) EGU Conferences

    Science.gov (United States)

    Laj, Carlo; Cifelli, Francesca

    2015-04-01

    The Alexander von Humboldt Conference Series of the European Geosciences Union are a series of meetings held outside of Europe, in particular in South America, Africa or Asia, on selected topics of geosciences with a socio-economic impact for regions on these continents, jointly organised with the scientists and their institutes and the institutions of these regions. Given the increasing success of the GIFT workshops held in conjunction with the General Assemblies, since 2010 EGU has also developed a series of GIFT workshops held in conjunction with AvH conferences. Associated GIFT workshops were held in Merida, Yucatan, on the theme of Climate Change, Natural Hazards and Societies (March 2010), then in Penang, Malaysia (June 2011) on the theme of Ocean Acidification, in November 2012 in Cusco (Peru) on the theme of Natural Disasters, Global Change and the Preservation of World Heritage Sites, finally in Istanbul (March 2014) on "High Impact Natural Hazards Related to the Euro-Mediterranean Region. The next GIFT workshop is already planned for October 2015 in Adis Ababa (Ethiopia) on the theme "Water". In each case, the GIFT workshop was held on the last two days of the AvH conference and reunited 40-45 teachers from the nation where the AvH was held. Keynote speakers from AvH were speakers to the GIFT workshops which also included hands-on activities animated by sciences educators. These GIFT workshops represented the first workshops specifically aimed at teachers held in the country, and therefore represents a significant Earth Sciences contribution to secondary education in non European countries.

  4. 78 FR 23574 - Public Workshop on Marine Technology and Standards

    Science.gov (United States)

    2013-04-19

    .... The workshop will provide a unique opportunity for classification societies, industry groups... on the marine industry, corresponding coverage in related codes and standards, and government... workshop will be held at The Double Tree by Hilton Hotel, in the Crystal City neighborhood of Arlington...

  5. Report of the U.S. Geological Survey Lidar Workshop sponsored by the Land Remote Sensing Program and held in St. Petersburg, FL, November 2002

    Science.gov (United States)

    Crane, Michael; Clayton, Tonya; Raabe, Ellen; Stoker, Jason M.; Handley, Larry; Bawden, Gerald; Morgan, Karen; Queija, Vivian R.

    2004-01-01

    The first United States Geological Survey (USGS) Light Detection And Ranging (lidar) Workshop was held November 20-22, 2002 in St. Petersburg, Florida to bring together scientists and managers from across the agency. The workshop agenda focused on six themes: 1) current and future lidar technologies, 2) lidar applications within USGS science and disciplines, 3) calibration and accuracy assessment, 4) tools for processing and evaluating lidar data sets, 5) lidar data management, and 6) commercial and contracting issues. These six themes served as the topics for workshop plenary sessions as well as the general focus for associated breakout sessions. A number of recommendations are presented regarding the role the USGS should play in the future application and development of lidar technology.

  6. Standards and Best Practices Application of Standards for Equipment-Manufacturing Industries Workshop Held in Shanghai

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ The "Application of Standards for Equipment-Manufacturing Industry Workshop" was held for two days in Shanghai from May 25th to May 26th, 2007. Dozens of delegates from famous enterprises and organizations around the world participated, including those from Shell China Ltd., Leal China, Siemens Ltd. China Corporate, and Assurance of SAI Global and SGS . Nine experts, engaged in standardization, intellectual property, and related fields, gave speeches on "Standards and Best Practices," and many illustrative examples of the application of standards were provided.

  7. Proceedings of the Workshop on Advanced Network and Technology Concepts for Mobile, Micro, and Personal Communications

    Science.gov (United States)

    Paul, Lori (Editor)

    1991-01-01

    The Workshop on Advanced Network and Technology Concepts for Mobile, Micro, and Personal Communications was held at NASA's JPL Laboratory on 30-31 May 1991. It provided a forum for reviewing the development of advanced network and technology concepts for turn-of-the-century telecommunications. The workshop was organized into three main categories: (1) Satellite-Based Networks (L-band, C-band, Ku-band, and Ka-band); (2) Terrestrial-Based Networks (cellular, CT2, PCN, GSM, and other networks); and (3) Hybrid Satellite/Terrestrial Networks. The proceedings contain presentation papers from each of the above categories.

  8. Preserving competence in nuclear technology. Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Steinwarz, Wolfgang [Siempelkamp Behaeltertechnik GmbH, Krefeld (Germany)

    2015-10-15

    On the 17th workshop Preserving Competence in Nuclear Technology 21 young scientists presented the scientific results from their thesis work for a diploma, mastership or a PhD covering a broad spectrum of technical areas. This demonstrated again the strong engagement of the younger generation as part of the German nuclear society. Prof. Dr.-Ing. Eckart Laurin, Prof. Dr.-Ing. Marco K. Koch and Dr.-Ing. Wolfgang Steinwarz as members of the jury assessed the written compacts and the oral presentations to award the Siempelkamp Competence Price 2015 to Tobias Seidel from Helmholtz-Zentrum Dresden-Rossendorf e.V.

  9. PREFACE: 2nd Workshop on Germanium Detectors and Technologies

    Science.gov (United States)

    Abt, I.; Majorovits, B.; Keller, C.; Mei, D.; Wang, G.; Wei, W.

    2015-05-01

    The 2nd workshop on Germanium (Ge) detectors and technology was held at the University of South Dakota on September 14-17th 2014, with more than 113 participants from 8 countries, 22 institutions, 15 national laboratories, and 8 companies. The participants represented the following big projects: (1) GERDA and Majorana for the search of neutrinoless double-beta decay (0νββ) (2) SuperCDMS, EDELWEISS, CDEX, and CoGeNT for search of dark matter; (3) TEXONO for sub-keV neutrino physics; (4) AGATA and GRETINA for gamma tracking; (5) AARM and others for low background radiation counting; (5) as well as PNNL and LBNL for applications of Ge detectors in homeland security. All participants have expressed a strong desire on having better understanding of Ge detector performance and advancing Ge technology for large-scale applications. The purpose of this workshop was to leverage the unique aspects of the underground laboratories in the world and the germanium (Ge) crystal growing infrastructure at the University of South Dakota (USD) by brining researchers from several institutions taking part in the Experimental Program to Stimulate Competitive Research (EPSCoR) together with key leaders from international laboratories and prestigious universities, working on the forefront of the intensity to advance underground physics focusing on the searches for dark matter, neutrinoless double-beta decay (0νββ), and neutrino properties. The goal of the workshop was to develop opportunities for EPSCoR institutions to play key roles in the planned world-class research experiments. The workshop was to integrate individual talents and existing research capabilities, from multiple disciplines and multiple institutions, to develop research collaborations, which includes EPSCor institutions from South Dakota, North Dakota, Alabama, Iowa, and South Carolina to support multi-ton scale experiments for future. The topic areas covered in the workshop were: 1) science related to Ge

  10. U.S. DOE Roundtable and Workshop on Advanced Steel Technologies: Emerging Global Technologies and R&D Opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Pellegrino, Joan [Energetics, Inc., Columbia, MD (United States); Jamison, Keith [Energetics, Inc., Columbia, MD (United States)

    2015-12-01

    This report is based on the proceedings of the U.S. DOE Roundtable and Workshop on Advanced Steel Technologies Workshop hosted by Oak Ridge National Laboratory (ORNL) in cooperation with the U.S. Department of Energy s (DOE s) Advanced Manufacturing Office (AMO) on held on June 23, 2015. Representatives from industry, government, and academia met at the offices of the National Renewable Energy Laboratory in Washington, DC, to share information on emerging steel technologies, issues impacting technology investment and deployment, gaps in research and development (R&D), and opportunities for greater energy efficiency. The results of the workshop are summarized in this report. They reflect a snapshot of the perspectives and ideas generated by the individuals who attended and not all-inclusive of the steel industry and stakeholder community.

  11. Effective Technology for Recycling Metal. Proceedings of Two Special Workshops.

    Science.gov (United States)

    National Association of Secondary Material Industries, Inc., New York, NY.

    The National Association of Secondary Material Industries (NASMI) and the Bureau of Mines have cooperated to sponsor two technically-oriented workshops related to the role of metals recycling and air pollution control technology. The proceedings of these workshops, "Effective Technology and Research for Scrap Metal Recycling" and "Air Pollution…

  12. Chemical sensors technology development planning workshop

    Energy Technology Data Exchange (ETDEWEB)

    Bastiaans, G.J.; Haas, W.J. Jr.; Junk, G.A. [eds.

    1993-03-01

    The workshop participants were asked to: (1) Assess the current capabilities of chemical sensor technologies for addressing US Department of Energy (DOE) Environmental Restoration and Waste Management (EM) needs; (2) Estimate potential near term (one to two years) and intermediate term (three to five years) capabilities for addressing those needs; and (3) Generate a ranked list of specific recommendations on what research and development (R&D) should be funded to provide the necessary capabilities. The needs were described in terms of two pervasive EM problems, the in situ determination of chlorinated volatile organic compounds (VOCs), and selected metals in various matrices at DOE sites. The R&D recommendations were to be ranked according to the estimated likelihood that the product technology will be ready for application within the time frame it is needed and the estimated return on investment. The principal conclusions and recommendations of the workshop are as follows: Chemical sensors capable of in situ determinations can significantly reduce analytical costs; Chemical sensors have been developed for certain VOCs in gases and water but none are currently capable of in situ determination of VOCs in soils; The DOE need for in situ determination of metals in soils cannot be addressed with existing chemical sensors and the prospects for their availability in three to five years are uncertain; Adaptation, if necessary, and field application of laboratory analytical instruments and those few chemical sensors that are already in field testing is the best approach for the near term; The chemical sensor technology development plan should include balanced support for near- and intermediate-term efforts.

  13. Recommendations and report from the second Flora Malesiana Workshop held in Yogyakarta 11 and 12 September 1992

    NARCIS (Netherlands)

    NN,

    1992-01-01

    As an integrated part of the highly successful second Flora Malesiana Symposium held in Yogyakarta from 7—12 September 1992, a workshop on four major aspects included in the Flora Malesiana Action Plan (viz.: 1. Fund raising; 2. Recruitment of new authors; 3. Training and exchange programmes; 4.

  14. Architectures, Concepts and Technologies for Service Oriented Computing : Proceedings of the 2nd International Workshop on Architectures, Concepts and Technologies for Service Oriented Computing - ACT4SOC 2008

    NARCIS (Netherlands)

    Sinderen, van Marten

    2008-01-01

    This volume contains the proceedings of the Second International Workshop on Architectures, Concepts and Technologies for Service Oriented Computing (ACT4SOC 2008), held on July 5 in Porto, Portugal, in conjunction with the Third International Conference on Software and Data Technologies (ICSOFT 200

  15. Smolt Survival Workshop: Proceedings of a Workshop held at University of Washington Laboratory, Friday Harbor, Washington, February 1-3, 1989.

    Energy Technology Data Exchange (ETDEWEB)

    Dauble, Dennis D.; Neitzel, D.A.; Anderson, James J.

    1989-09-01

    A workshop was held at the University of Washington Laboratory to evaluate measures of juvenile salmon and steelhead survival and to recommend approaches for future studies in the Columbia River. Specific workshop goals included: review standards used to evaluate survival in previous studies and agree on standards for future studies, evaluate existing methods for determining survival, recommend types of survival studies that can be conducted with existing techniques, identify new approaches and facilities for improving survival estimates, and reach consensus on future directions for survival studies. 5 figs., 4 tabs.

  16. Public perceptions of low carbon energy technologies. Results from a Dutch large group workshop

    Energy Technology Data Exchange (ETDEWEB)

    Brunsting, S.; Van Bree, B.; Feenstra, C.F.J.; Hekkenberg, M. [ECN Policy Studies, Petten (Netherlands)

    2011-06-15

    This report describes the outcomes of a large group workshop held in Utrecht, the Netherlands on 21 May 2011. The workshop aims to learn about Dutch citizens perspectives on climate change and low emission energy technologies and how these perspectives may change after receiving and discussing objective information. This report presents participants environmental profile, stated beliefs, knowledge and attitudes, support for different energy technologies, and environmental behaviours and intentions, derived from questionnaire answers and observations during the day. The report also presents observed changes on the above over the course of the workshop. Whereas the report provides some conclusions and inferences throughout its sections, the focus of the report is on presenting the observations. No overall conclusions are drawn.

  17. Exploiting Commercial Games and Technology for Military Use - 8th Workshop (Exploitation des jeux et des technologies du commerce pour un usage militaire - 8eme atelier). Meeting Proceedings of the NATO Modeling and Simulation Group (NMSG) Workshop held at the Virginia Modeling, Analysis, and Simulation Center, Suffolk, Virginia, U.S.A., 22-24 September 2009.

    Science.gov (United States)

    2009-09-01

    PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) 8. PERFORMING ORGANIZATION...the Alliance, to maintain a technological lead, and to provide advice to NATO and national decision makers. The RTO performs its mission with the...actuel. L’OTAN et ACT disposent de l’infrastructure organisationnelle propre à faciliter ce type d’ateliers et doit les poursuivre.

  18. US/Japan workshop on mitigation and adaptation technologies related to global climate change

    Energy Technology Data Exchange (ETDEWEB)

    Bernthal, F.M.

    1993-12-31

    It is a great pleasure for me to have the honor of delivering the keynote address for this important gathering, an honor enhanced further because of the many activities and historic relationships represented by this workshop. First of all, it represents the spirit of continuing cooperation and good relations between the United States and Japan. With the aid of the framework provided by the U.S./Japan Science and Technology Agreement, our two nations can come together to address a problem that has no national boundaries {hor_ellipsis} and we can think about solutions of potential benefit to all citizens of the global community. This workshop also symbolizes the spirit of cooperation so characteristic of the conduct of research in science and technology -- cooperation between us as individual scientists and engineers, between the various institutions we represent, and across our diverse disciplines. This workshop is only the second of its kind. The first US/Japan Workshop on global climate change was held last year in Japan. That workshop focused on cooperative scientific research in the United States and Japan. Out of it came a general agreement to continue collaborative work and to extend cooperation into the area of global change-related technologies, in particular those technologies that hold promise for mitigation and adaptation.

  19. Fundamental physics at the intensity frontier. Report of the workshop held December 2011 in Rockville, MD.

    Energy Technology Data Exchange (ETDEWEB)

    Hewett, J.L.; Weerts, H.; Brock, R.; Butler, J.N.; Casey, B.C.K.; Lu, Z.T.; Wagner, C.E.M.; Dietrich, M.R.; Djurcic, Z.; Goodman, M.; Green, J.P.; Holt, R.J.; Mueller, P.; Paley, J.; Reimer, P.; Singh, J.; Upadhye, A. (High Energy Physics); ( PHY); (Stanford Linear Accelerator Center); (Univ. of Michigan); (Fermi National Accelerator Laboratory)

    2012-06-05

    new sources of CP violation? Is there CP violation in the leptonic sector? Are neutrinos their own antiparticles? Do the forces unify? Is there a weakly coupled hidden sector that is related to dark matter? Do new symmetries exist at very high energy scales? To identify the most compelling science opportunities in this area, the workshop Fundamental Physics at the Intensity Frontier was held in December 2011, sponsored by the Office of High Energy Physics in the US Department of Energy Office of Science. Participants investigated the most promising experiments to exploit these opportunities and described the knowledge that can be gained from such a program. The workshop generated much interest in the community, as witnessed by the large and energetic participation by a broad spectrum of scientists. This document chronicles the activities of the workshop, with contributions by more than 450 authors. The workshop organized the intensity frontier science program along six topics that formed the basis for working groups: experiments that probe (i) heavy quarks, (ii) charged leptons, (iii) neutrinos, (iv) proton decay, (v) light, weakly interacting particles, and (vi) nucleons, nuclei, and atoms. The conveners for each working group included an experimenter and a theorist working in the field and an observer from the community at large. The working groups began their efforts well in advance of the workshop, holding regular meetings and soliciting written contributions. Specific avenues of exploration were identified by each working group. Experiments that study rare strange, charm, and bottom meson decays provide a broad program of measurements that are sensitive to new interactions. Charged leptons, particularly muons and taus, provide a precise probe for new physics because the Standard Model predictions for their properties are very accurate. Research at the intensity frontier can reveal CP violation in the lepton sector, and elucidate whether neutrinos are their own

  20. Fundamental physics at the intensity frontier. Report of the workshop held December 2011 in Rockville, MD.

    Energy Technology Data Exchange (ETDEWEB)

    Hewett, J.L.; Weerts, H.; Brock, R.; Butler, J.N.; Casey, B.C.K.; Lu, Z.T.; Wagner, C.E.M.; Dietrich, M.R.; Djurcic, Z.; Goodman, M.; Green, J.P.; Holt, R.J.; Mueller, P.; Paley, J.; Reimer, P.; Singh, J.; Upadhye, A. (High Energy Physics); ( PHY); (Stanford Linear Accelerator Center); (Univ. of Michigan); (Fermi National Accelerator Laboratory)

    2012-06-05

    new sources of CP violation? Is there CP violation in the leptonic sector? Are neutrinos their own antiparticles? Do the forces unify? Is there a weakly coupled hidden sector that is related to dark matter? Do new symmetries exist at very high energy scales? To identify the most compelling science opportunities in this area, the workshop Fundamental Physics at the Intensity Frontier was held in December 2011, sponsored by the Office of High Energy Physics in the US Department of Energy Office of Science. Participants investigated the most promising experiments to exploit these opportunities and described the knowledge that can be gained from such a program. The workshop generated much interest in the community, as witnessed by the large and energetic participation by a broad spectrum of scientists. This document chronicles the activities of the workshop, with contributions by more than 450 authors. The workshop organized the intensity frontier science program along six topics that formed the basis for working groups: experiments that probe (i) heavy quarks, (ii) charged leptons, (iii) neutrinos, (iv) proton decay, (v) light, weakly interacting particles, and (vi) nucleons, nuclei, and atoms. The conveners for each working group included an experimenter and a theorist working in the field and an observer from the community at large. The working groups began their efforts well in advance of the workshop, holding regular meetings and soliciting written contributions. Specific avenues of exploration were identified by each working group. Experiments that study rare strange, charm, and bottom meson decays provide a broad program of measurements that are sensitive to new interactions. Charged leptons, particularly muons and taus, provide a precise probe for new physics because the Standard Model predictions for their properties are very accurate. Research at the intensity frontier can reveal CP violation in the lepton sector, and elucidate whether neutrinos are their own

  1. 75 FR 9007 - National Science and Technology Council, Committee on Technology Capstone Workshop Risk...

    Science.gov (United States)

    2010-02-26

    ... TECHNOLOGY POLICY National Science and Technology Council, Committee on Technology Capstone Workshop Risk Management Methods & Ethical, Legal, and Societal Implications of Nanotechnology: Public Meeting ACTION... the Nanoscale Science, Engineering, and Technology (NSET) Subcommittee of the Committee on...

  2. Proceedings -- US Russian workshop on fuel cell technologies

    Energy Technology Data Exchange (ETDEWEB)

    Baker, B.; Sylwester, A. [comps.

    1996-04-01

    On September 26--28, 1995, Sandia National Laboratories sponsored the first Joint US/Russian Workshop on Fuel Cell Technology at the Marriott Hotel in Albuquerque, New Mexico. This workshop brought together the US and Russian fuel cell communities as represented by users, producers, R and D establishments and government agencies. Customer needs and potential markets in both countries were discussed to establish a customer focus for the workshop. Parallel technical sessions defined research needs and opportunities for collaboration to advance fuel cell technology. A desired outcome of the workshop was the formation of a Russian/American Fuel Cell Consortium to advance fuel cell technology for application in emerging markets in both countries. This consortium is envisioned to involve industry and national labs in both countries. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

  3. Proceedings of the international workshop on spallation materials technology

    Energy Technology Data Exchange (ETDEWEB)

    Mansur, L.K.; Ullmaier, H. [comps.

    1996-10-01

    This document contains papers which were presented at the International Workshop on Spallation Materials Technology. Topics included: overviews and thermal response; operational experience; materials experience; target station and component design; particle transport and damage calculations; neutron sources; and compatibility.

  4. Technological challenges in antibiotic discovery and development: a workshop summary

    National Research Council Canada - National Science Library

    Friedman, Douglas C; Alper, Joe

    2014-01-01

    "Technological Challenges in Antibiotic Discovery and Development is the summary of a workshop convened by the Chemical Sciences Roundtable in September 2013 to explore the current state of antibiotic...

  5. Proceedings of the international workshop on spallation materials technology

    Energy Technology Data Exchange (ETDEWEB)

    Mansur, L.K.; Ullmaier, H. [comps.

    1996-10-01

    This document contains papers which were presented at the International Workshop on Spallation Materials Technology. Topics included: overviews and thermal response; operational experience; materials experience; target station and component design; particle transport and damage calculations; neutron sources; and compatibility.

  6. Findings of the NATO workshop on data fusion technologies for harbour protection

    Science.gov (United States)

    Shahbazian, Elisa; DeWeert, Michael J.; Rogova, Galina

    2006-05-01

    The NATO Security Through Science Program and the Defence Investment Division requested and sponsored the organization of a NATO Advanced Research Workshop (ARW) on the topic of Data Fusion Technologies for Harbour Protection, which was held June 27-July 1, 2005 in Tallinn, Estonia. The goal of the workshop was to help knowledge exchange between the technology experts and the security policy makers for a better understanding of goals, functions and information requirements of the decision makers as well as the way the data fusion technology can help enhancing security of harbours. In addition to presentations by experts from the research community on detection and fusion technologies as well as in practice and policy the workshop program included daily breakout sessions, in which the participants were given an opportunity to brainstorm on the topics of the workshop in interdisciplinary smaller teams. The working groups: (i) chose a scenario, including threat stages, threat types, threat methods and ranges, and response constraints due to the particular harbour environment; then (ii) identified: (a) requirements (objectives, functions and essential elements of information); (b) technologies (available and future); (c) information available and necessary through sensors and other sources, as agencies and jurisdiction; (d) methods: detection, identification, situation assessment, prediction. This paper describes the main issues and proposed approaches that were identified by the working groups.

  7. Standard Systems Group (SSG) Technology Adoption Planning Workshop

    Science.gov (United States)

    2004-04-01

    Internet Routed Protocol Network (SIPRNET) architecture • Replace the current 5-year old enterprise network backup system • Improve of current IPTV ...Standard Systems Group (SSG) Technology Adoption Planning Workshop Suzanne Garcia Lorraine Nemeth-Adams Jan Vargas April 2004...Standard Systems Group(SSG) Technology Adoption Planning Workshop 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d

  8. International Workshop on Evidence-Based Technology Enhanced Learning

    CERN Document Server

    Gennari, Rosella; Marenzi, Ivana; Prieta, Fernando; Rodríguez, Juan

    2012-01-01

    Research on Technology Enhanced Learning (TEL) investigates how information and communication technologies can be designed in order to support pedagogical activities. The workshop proceedings collects contributions concerning evidence based TEL systems, like their design following EBD principles as well as studies or best practices that educators, education stakeholders or psychologists used to diagnose or improve their students' learning skills, including students with specific difficulties. The international ebTEL’12 workshop wants to be a forum in which TEL researchers and practitioners alike can discuss ideas, projects, and lessons related to ebTEL. The workshop takes place in Salamanca, Spain, on March 28th-30th 2012.  

  9. Workshop on Learning Technology for Education in Cloud

    CERN Document Server

    Rodríguez, Emilio; Santana, Juan; Prieta, Fernando

    2012-01-01

    Learning Technology for Education in Cloud investigates how cloud computing can be used to design applications to support real time on demand learning using technologies. The workshop proceedings provide opportunities for delegates to discuss the latest research in TEL (Technology Enhanced Learning) and its impacts for learners and institutions, using cloud.   The Workshop on Learning Technology for Education in Cloud (LTEC '12) is a forum where researchers, educators and practitioners came together to discuss ideas, projects and lessons learned related to the use of learning technology in cloud, on the 11th-13th July at Salamanca in Spain.

  10. Summary of annual cycle energy system workshop I held October 29--30, 1975, at Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, H.C.; Moyers, J.C.; Hise, E.C.; Nephew, E.A. (eds.)

    1976-07-01

    The Annual Cycle Energy System (ACES) concept provides space heating, air conditioning, and water heating by means of a heat pump and an energy storage tank. Heat is removed in winter from the water in the tank and is added during the following summer. A workshop was held on October 29-30, 1975 in Oak Ridge, Tenn. to disseminate information on ACES. This report gives summaries of the presentations, which covered technical, economic, and institutional aspects of the concept.

  11. SPEAR3 Workshop: Making the Scientific Case: Report from Workshop held at Stanford Synchrotron Radiation Laboratory, May 29-30, 1997

    Energy Technology Data Exchange (ETDEWEB)

    Brennan, S.

    1998-08-13

    As part of the planning process for the proposed upgrade to the SPEAR electron storage ring, SSRL, the SSRL Users Organization and the SSRL faculty sponsored a 1 1/2 day workshop on May 29-30 1997. The goal was to assess and document the impact of SPEAR3 on current and future science and technology research programs of the users of SSRL. The hard and soft x-ray beams produced at SSRL are used in a number of different scientific and technological disciplines. The workshop was organized by defining a set of areas of science and technology covering the basic activities at SSRL and inviting key people from outside Stanford to work with the SSRL faculty and staff in a set of topical groups on estimating the impact of SPEAR3 on their respective fields and developing a vision of the future opportunities. This report documents those scientific and technological opportunities and provides written summaries of the discussions. The report is organized with a brief technical description of SPEAR3 and planned beam line upgrades (which summarizes material presented to the workshop participants prior to the breakout sessions) following this executive summary. More detailed information from the topical working groups then follows. Finally, an appendix provides a list of workshop participants and a copy of the workshop agenda as well as some more detailed information on the SPEAR3 lattice and machine.

  12. Future Technology Workshop: A Collaborative Method for the Design of New Learning Technologies and Activities

    Science.gov (United States)

    Vavoula, Giasemi N.; Sharples, Mike

    2007-01-01

    We describe the future technology workshop (FTW), a method whereby people with everyday knowledge or experience in a specific area of technology use (such as using digital cameras) envision and design the interactions between current and future technology and activity. Through a series of structured workshop sessions, participants collaborate to…

  13. 2011 Agile (Scrum) Workshop Held in Baltimore, Maryland on November 14-15, 2011

    Science.gov (United States)

    2011-11-15

    Untitled Document 2011agile.html[3/23/2016 10:24:57 AM] Files are in Adobe format. Download the newest version from Adobe. 2011 AGILE ( SCRUM ...2750 HYATT REGENCY BALTIMORE u BALTIMORE, MD EVENT #2750 AGILE ( SCRUM ) WORKSHOP Sponsored by the C4ISR Division of NDIA AGILE ( SCRUM ) WORKSHOP...practices in DoD. AGILE ( SCRUM ) WORKSHOP NOVEMBER 14-15, 2011 GREG SHARP Software Development Team Lead, USAF PEX Mr. Greg Sharp is a Soft- ware

  14. Physics with fast molecular-ion beams. Proceedings of workshop held at Argonne National Laboratory, August 20-21, 1979. [Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Gemmell, D.S. (ed.)

    1979-01-01

    The Workshop on Physics with Fast Molecular-Ion Beams was held in the Physics Division, Argonne National Laboratory on August 20 and 21, 1979. The meeting brought together representatives from several groups studying the interactions of fast (MeV) molecular-ion beams with matter. By keeping the Workshop program sharply focussed on current work related to the interactions of fast molecular ions, it was made possible for the participants to engage in vigorous and detailed discussions concerning such specialized topics as molecular-ion dissociation and transmission, wake effects, ionic charge states, cluster stopping powers, beam-foil spectroscopy, electron-emissions studies with molecular-ion beams, and molecular-ion structure determinations.

  15. First workshop on the possibilities of biorefinery concepts for the industry : held at hotel "De Wageningse Berg", Wageningen, the Netherlands (16 June 2006) : official minutes

    NARCIS (Netherlands)

    Annevelink, E.; Jong, de E.; Ree, van R.; Zwart, R.W.R.

    2006-01-01

    On June the 16th the first ¿workshop on the possibilities of biorefinery concepts for the industry¿ was held, bringing together different Dutch stakeholders, and addressing common as well as conflicting technical and market issues with regard to biorefinery opportunities. The first-of-akind workshop

  16. First workshop on the possibilities of biorefinery concepts for the industry : held at hotel "De Wageningse Berg", Wageningen, the Netherlands (16 June 2006) : official minutes

    NARCIS (Netherlands)

    Annevelink, E.; Jong, de E.; Ree, van R.; Zwart, R.W.R.

    2006-01-01

    On June the 16th the first ¿workshop on the possibilities of biorefinery concepts for the industry¿ was held, bringing together different Dutch stakeholders, and addressing common as well as conflicting technical and market issues with regard to biorefinery opportunities. The first-of-akind workshop

  17. Fiscal 1999 international engineer exchange project (Coal mining technology field). Overseas workshop (Australia); 1999 nendo gijutsusha koryu jigyo (tanko gijutsu bun'ya) kokusai koryu jigyo. Kaigai workshop (Goshu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This report summarizes the technology exchange with Australian coal mining engineers, the technical levels and needs on coal production, safety and environment in Australia, and the FS result on transfer of Japanese technologies, engineer exchange and joint research in a coal mining technology field. The overseas workshop (Australia) was held on Nov. 9, 1999 (Tues.) in Brisbane, Queensland. The Australia-Japan Technology Exchange Workshop on coal resources and coal mining technology includes 5 sessions (keynote address, trends and issues of coal resource development, coal resources and production technology, coal resources and safety technology, coal resources and environmental problems), and the open forum discussion on innovative technologies for coal mining. 6 Japanese specialists and 11 Australian specialists read papers. After the workshop, the participants visited Liddell Mine in New South Wales to master natural conditions, and production and safety technology levels of Australian coal mines, and to exchange various information with Australian coal mining engineers. (NEDO)

  18. Special Workshop of Marie Curie Fellows on Research and Training in Physics and Technology

    CERN Document Server

    Patrice Loiez

    2002-01-01

    Photo 0210004_1: Prof. Ugo Amaldi, University of Milano Bicocca and Tera Foundation, Italy. Addressing the Marie Curie Workshop held at CERN 3-4 October 2002. Title of this talk:"Research Developments on Medical Physics". Photo 0210004_2: Marie Curie Fellows at CERN. Participating in Marie Curie Workshop held at CERN 3-4 October 2002.

  19. Introduction to the workshop on technology transfer in software engineering

    NARCIS (Netherlands)

    Harrison, Warren; Wieringa, Roelf J.

    The goal of the Workshop on Technology Transfer in Software Engineering is to increase our understanding of technology transfer in software engineering, and to learn from successful case studies. We wanted to bring researchers and practitioners together to create an inventory of problems in software

  20. FY 2000 international exchange project on exchanges of engineers - Coal mine technology field. Overseas workshop (China); 2000 nendo gijutsusha koryu jigyo (tanko gijutsu bun'ya) kokusai koryu jigyo. Kaigai workshop (Chugoku)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the purpose of making technical exchanges with coal mine related engineers in China and surveying levels of coal production technology and the needs in China and possibilities of technology transfer from Japan, workshop was held and technical tours were made. On December 13, 2000, a workshop was held in China which was named 'Japan-China Joint Coal Project Workshop: Environment/Production/Security.' Participants were 112 including 16 from Japan and 96 from China. Subjects were as follows: subjects on coal resource and technical strategy in the 21st century, technical exchange project and technical development, Japan-China technical cooperation project, report on the operational situation of China Coal Industry Environmental Preservation Safety Training Center, Japan-China Joint Project on spontaneous combustion prevention technology, CMG recovery/utilization system joint demonstration project, Japan-China joint coal exploration project, Japan-China coal field geology joint exploration project, etc. (NEDO)

  1. Promoting Physical Activity through Hand-Held Computer Technology

    Science.gov (United States)

    King, Abby C.; Ahn, David K.; Oliveira, Brian M.; Atienza, Audie A.; Castro, Cynthia M.; Gardner, Christopher D.

    2009-01-01

    Background Efforts to achieve population-wide increases in walking and similar moderate-intensity physical activities potentially can be enhanced through relevant applications of state-of-the-art interactive communication technologies. Yet few systematic efforts to evaluate the efficacy of hand-held computers and similar devices for enhancing physical activity levels have occurred. The purpose of this first-generation study was to evaluate the efficacy of a hand-held computer (i.e., personal digital assistant [PDA]) for increasing moderate intensity or more vigorous (MOD+) physical activity levels over 8 weeks in mid-life and older adults relative to a standard information control arm. Design Randomized, controlled 8-week experiment. Data were collected in 2005 and analyzed in 2006-2007. Setting/Participants Community-based study of 37 healthy, initially underactive adults aged 50 years and older who were randomized and completed the 8-week study (intervention=19, control=18). Intervention Participants received an instructional session and a PDA programmed to monitor their physical activity levels twice per day and provide daily and weekly individualized feedback, goal setting, and support. Controls received standard, age-appropriate written physical activity educational materials. Main Outcome Measure Physical activity was assessed via the Community Healthy Activities Model Program for Seniors (CHAMPS) questionnaire at baseline and 8 weeks. Results Relative to controls, intervention participants reported significantly greater 8-week mean estimated caloric expenditure levels and minutes per week in MOD+ activity (p<0.04). Satisfaction with the PDA was reasonably high in this largely PDA-naive sample. Conclusions Results from this first-generation study indicate that hand-held computers may be effective tools for increasing initial physical activity levels among underactive adults. PMID:18201644

  2. Promoting physical activity through hand-held computer technology.

    Science.gov (United States)

    King, Abby C; Ahn, David K; Oliveira, Brian M; Atienza, Audie A; Castro, Cynthia M; Gardner, Christopher D

    2008-02-01

    Efforts to achieve population-wide increases in walking and similar moderate-intensity physical activities potentially can be enhanced through relevant applications of state-of-the-art interactive communication technologies. Yet few systematic efforts to evaluate the efficacy of hand-held computers and similar devices for enhancing physical activity levels have occurred. The purpose of this first-generation study was to evaluate the efficacy of a hand-held computer (i.e., personal digital assistant [PDA]) for increasing moderate intensity or more vigorous (MOD+) physical activity levels over 8 weeks in mid-life and older adults relative to a standard information control arm. Randomized, controlled 8-week experiment. Data were collected in 2005 and analyzed in 2006-2007. Community-based study of 37 healthy, initially underactive adults aged 50 years and older who were randomized and completed the 8-week study (intervention=19, control=18). Participants received an instructional session and a PDA programmed to monitor their physical activity levels twice per day and provide daily and weekly individualized feedback, goal setting, and support. Controls received standard, age-appropriate written physical activity educational materials. Physical activity was assessed via the Community Healthy Activities Model Program for Seniors (CHAMPS) questionnaire at baseline and 8 weeks. Relative to controls, intervention participants reported significantly greater 8-week mean estimated caloric expenditure levels and minutes per week in MOD+ activity (pfirst-generation study indicate that hand-held computers may be effective tools for increasing initial physical activity levels among underactive adults.

  3. Power sources manufactures association : power technology roadmap workshop - 2006.

    Energy Technology Data Exchange (ETDEWEB)

    Bowers, John S.

    2006-03-01

    The Power Sources Manufacturers Association (PSMA) is pleased to announce the release of the latest Power Technology Roadmap Workshop Report. This Fifth Edition Workshop Report includes presentations and discussions from the workshop as seen by the participants that included many of the industry's most influential members representing end-users, power supply manufacturers, component suppliers, consultants and academia. This report provides detailed projections for the next three to four years of various technologies in a quantitative form. There was special emphasis on how the increasing use of digital technologies will affect the industry in the next four years. The technology trend analysis and the roadmap is provided for the following specific product families expected to be the areas of largest market growth: (1) Ac-dc front end power supplies--1 kW from a single phase ac source; (2) External ac-dc power supplies; (3) Dc-dc bus converters; and (4) Non-isolated dc-dc converters. Bruce Miller, Chairman of PSMA, stated that 'the Power Technology Roadmap Workshop Report is an extensive document that analyzes and provides projections for most major technical parameters for a specific power supply. It is a unique document as it contains technology/parametric trends in a roadmap fashion from a variety of diverse sources, giving significant depth to its content. No such information is available from any other source'. The Power Technology Roadmap Workshop Report is available at no cost as to PSMA Regular and Associate members and at a reduced price to Affiliate members as a benefit of membership. The report will be offered to non-members at a price of $2490. For further information or to buy a copy of the report, please visit the publications page or the PSMA website or contact the Association Office.

  4. 2nd Topical Workshop on Laser Technology and Optics Design

    CERN Document Server

    2013-01-01

    Lasers have a variety of applications in particle accelerator operation and will play a key role in the development of future particle accelerators by improving the generation of high brightness electron and exotic ion beams and through increasing the acceleration gradient. Lasers will also make an increasingly important contribution to the characterization of many complex particle beams by means of laser-based beam diagnostics methods. The second LANET topical workshop will address the key aspects of laser technology and optics design relevant to laser application to accelerators. The workshop will cover general optics design, provide an overview of different laser sources and discuss methods to characterize beams in details. Participants will be able to choose from a range of topical areas that go deeper in more specific aspects including tuneable lasers, design of transfer lines, noise sources and their elimination and non-linear optics effects. The format of the workshop will be mainly training-based wit...

  5. Technology for Tomorrow---High-Tech Exhibition Held in HONG KONG

    Institute of Scientific and Technical Information of China (English)

    Fang Lin

    1997-01-01

    @@ "Technology for Tomorrow"--- High-Tech Exhibition has been held by Hong Kong Science & Technology Sector for Celebration of Return of Sovereignty Association and China Association Science & Technology on June 28 to July 4, 1997 in Hong Kong.

  6. Architectures, Concepts and Technologies for Service Oriented Computing : proceedings of ACT4SOC 2010, 4th International Workshop on Architectures, Concepts and Technologies for Service Oriented Computing in cnjunction with ICSOFT 2010, Athens, Greece, July 2010

    NARCIS (Netherlands)

    Sinderen, van Marten; Sapkota, Brahmananda

    2010-01-01

    This volume contains the proceedings of the Fourth International Workshop on Architectures, Concepts and Technologies for Service Oriented Computing (ACT4SOC 2010), held on July 23 in Athens, Greece, in conjunction with the Fourth International Conference on Software and Data Technologies (ICSOFT 20

  7. Requirements Engineering and Analysis Workshop Proceedings Held in Pittsburgh, Pennsylvania on 12-14 March 1991

    Science.gov (United States)

    1991-12-01

    urally. 6.5 Summary of Current or Potential Approaches Many approaches to context analysis were discussed by the group, including: * Causal Trees * SWOT ...This could come in the form of a purchase at a shopping mall , buying lunch, or delivering a pizza. The estimated economic loss due to congestion has...Requirements Engineering and Analysis Work- shop in Pittsburgh, Pennsylvania, on March 12-14, 1991. The intention of the workshop was to focus (please turn

  8. Special Workshop of Marie Curie Fellows on Research and Training in Physics and Technology.

    CERN Document Server

    Patrice Loiez

    2002-01-01

    Photo 0210008_05a: Dr, Rolf Landua (CERN) explaining to participants of the Marie Curie Workshop (held at CERN 3-4 October 2002) the ATHENA experiment and the Antiproton Decelerator. Photo 0210008_06a: Dr, Rolf Landua (CERN) explaining to participants of the Marie Curie Workshop (held at CERN 3-4 October 2002) the ATHENA experiment and the Antiproton Decelerator. Photo 0210008_08a: Dr, Rolf Landua (CERN) explaining to participants of the Marie Curie Workshop (held at CERN 3-4 October 2002) the ATHENA experiment and the Antiproton Decelerator. Photo 0210008_09a: Dr, Rolf Landua (CERN) explaining to participants of the Marie Curie Workshop (held at CERN 3-4 October 2002) the ATHENA experiment and the Antiproton Decelerator.

  9. National Educators' Workshop. Update 1999: Standard Experiments in Engineering, Materials Science and Technology

    Science.gov (United States)

    Arrington, Ginger L. F. (Compiler); Gardner, James E. (Compiler); Jacobs, James A. (Compiler); Fillion, John E. (Compiler); Mallick, P. K. (Compiler)

    2000-01-01

    This document contains a collection of experiments presented and demonstrated at the National Educators' Workshop: Update 99, held at DaimlerChrysler, Auburn Hills, Michigan, from October 31 - November 3, 1999.

  10. Emergency Medical Service (EMS): Rotorcraft Technology Workshop

    Science.gov (United States)

    Bauchspies, J. S.; Adams, R. J.

    1981-01-01

    A lead organization on the national level should be designated to establish concepts, locations, and the number of shock trauma air medical services. Medical specialists desire a vehicle which incorporates advances in medical technology trends in health care. Key technology needs for the emergency medical services helicopter of the future include the riding quality of fixed wing aircraft (reduced noise and vibration), no tail rotor, small rotor, small rotor diameter, improved visibility, crashworthy vehicle, IFR capability, more affordability high reliability, fuel efficient, and specialized cabins to hold medical/diagnostic and communications equipment. Approaches to a national emergency medical service are discussed.

  11. 7th Cambridge Workshops on Universal Access and Assistive Technology

    CERN Document Server

    Lazar, J; Heylighen, A; Dong, H; Inclusive Designing : Joining Usability, Accessibility, and Inclusion

    2014-01-01

    ‘Inclusive Designing’ presents the proceedings of the seventh Cambridge Workshop on Universal Access and Assistive Technology (CWUAAT '14). It represents a unique multi-disciplinary workshop for the Inclusive Design Research community where designers, computer scientists, engineers, architects, ergonomists, policymakers and user communities can exchange ideas. The research presented at CWUAAT '14 develops methods, technologies, tools and guidance that support product designers and architects to design for the widest possible population for a given range of capabilities, within a contemporary social and economic context. In the context of developing demographic changes leading to greater numbers of older people and people with disabilities, the general field of Inclusive Design Research strives to relate the capabilities of the population to the design of products. Inclusive populations of older people contain a greater variation in sensory, cognitive and physical user capabilities. These variations may be...

  12. [Pain and consciousness. Articles from the summer workshop held by the German Interdisciplinary Collaboration for Pain Therapy (DIVS) in 2005].

    Science.gov (United States)

    Laubenthal, H; Valet, M; Sprenger, T; Wöller, A; Tölle, T R; Röpcke, H; Wirz, S; Schröter, C; Schiltenwolf, M; Henningsen, P; Sundermeier, T; Ebell, H J; Kohnen, N; Häuser, W

    2007-06-01

    Six articles are presented which illustrate the activities at the summer workshop "Pain and awareness" held 27-28 May 2005 in Marienfeld by the German Interdisciplinary Collaboration for Pain Therapy (DIVS). One article on pain constructs in the mind explains the advantages of functional imaging methods: these enable characterization of partial aspects of pain processing in the brain and the mechanisms that lead to chronic states of pain syndromes. A further overview explains the influence of different drugs on pain perception and various conscious states. How back pain patients experience their illness was analyzed in a study using an explanatory model interview: somatic aspects were dominant, but in three-fourths of the patients psychological illness attributions also played a role. A summary from the perspective of religious history and theology explores how pain is interpreted and accepted in various religious communities. Another article addresses hypnosis as a complementary technique to anesthesia procedures in surgical medicine, for treating chronic pain and experimental acute pain. The last contribution deals with how people in different cultures experience pain: ethnocentric bias can lead to difficulties in communication and misjudgments when treating foreign-born patients. All in all the workshop highlighted important formative factors in pain processing in a condensed form and offered stimulating perspectives for this area of pain research and future treatment options.

  13. Report on the planning workshop on cost-effective ceramic machining. Ceramic Technology Project

    Energy Technology Data Exchange (ETDEWEB)

    Blau, P.J.

    1991-11-01

    A workshop on ``Cost Effective Ceramic Machining`` (CECM) was held at Oak Ridge Associated Universities Pollard Auditorium, Oak Ridge, Tennessee, May 1991. The purpose of this workshop was to present a preliminary project plan for industry critique and to identify specific components and cost-reduction targets for a new project on Cost Effective Ceramic Machining. The CECM project is an extension of the work on the Ceramic Technology for Advanced Heat Engines (CTAHE) Program sponsored by the Department of Energy, Office of Transportation Materials. The workshop consisted of fifteen invited papers, discussions, a survey of the attendee`s opinions, and a tour of the High Temperature Materials Laboratory at ORNL. The total number of registrants was sixty-seven, including thirty-three from industry or private sector organizations, seven from universities, three from industry groups, fourteen from DOE laboratories (including ORNL, Y-12, and Lawrence Livermore Laboratory), three from trade associations, and three from other government organizations. Forty- one survey forms, which critiqued the proposed project plan, were completed by attendees, and the results are presented in this report. Valves, cam roller followers, water pump seals, and diesel engine head plates were rated highest fro application of ceramic machining concepts to reduce cost. Coarse grinding, abrasives and wheel technology, and fine grinding were most highly rated as regards their impact on cost reduction. Specific cost-reduction targets for given parts varied greatly in the survey results and were not felt to be useful for the purposes for the CECM plan development. A range of individual comments were obtained and are listed in an appendix. As a result of the workshop and subsequent discussions, a modified project plan, different in certain aspects from the original CECM plan, has been developed.

  14. Proceedings of the third IEA international workshop on beryllium technology for fusion

    Energy Technology Data Exchange (ETDEWEB)

    Kawamura, Hiroshi; Okamoto, Makoto [eds.

    1998-01-01

    This report is the Proceedings of the Third International Energy Agency International Workshop on Beryllium Technology for Fusion. The workshop was held on October 22-24, 1997, at the Sangyou Kaikan in Mito City with 68 participants who attended from the Europe, the Russian Federation, the Kazakstan, the United States and Japan. The topics for papers were arranged into 9 sessions; beryllium applications for ITER, production and characterization, chemical compatibility and corrosion, forming and joining, plasma/tritium interactions, beryllium coating, first wall applications, neutron irradiation effects, health and safety. To utilize beryllium in the pebble type blanket, a series of discussions were intensified in multiple view points such as the swelling, He/T release from beryllium pebble irradiated up to high He content, effective thermal conductivity, tritium permeation and coating, and fabrication cost, and so on. As the plasma facing material, life time of beryllium and coated beryllium, dust and particle production, joining, waste treatment, mechanical properties and deformation by swelling were discussed as important issues. Especially, it was recognized throughout the discussions that the comparative study by the different researchers should be carried out to establish the reliability of the data reported in the workshop and in others. To enhance the comparative study, the world wide collaboration for the relative evaluation of the beryllium was proposed by the International Organization Committee and the proposal was approved by all of the participants. The 45 of the presented papers are indexed individually. (J.P.N.)

  15. Proceedings of the International Workshop on Nanomaterials, Magnetic Ions and Magnetic Semiconductors Studied Mostly by Hyperfine Interactions (IWNMS 2004) held in Baroda, India, 10–14 February 2004

    CERN Document Server

    Somayajulu, D. R. S; IWNMS 2004

    2005-01-01

    Proceedings of the Baroda Workshop IWNMS 2004, held in Baroda, India, 10-14 February, 2004 Researchers and graduate students interested in the Mössbauer Effect and its applications will find this volume indispensable. The volume presents the most recent developments in the methodology of Mössbauer spectroscopy. Reprinted from Hyperfine Interactions (HYPE) Volume 160, 1-4

  16. Workshop on Key Issues in Major Research Plan "Study on the Signal Conduction Process Based on Chemical Small Molecular Probe" Held

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ The workshop on key analysis method and largescale facilities application in the project of Major Research Plan "Study on the Signal Conduction Process Based on Chemical Small Molecular Probe" was held in the National Synchrotron Radiation Laboratory, Anhui on January 5th, 2008.

  17. Second Belgian Workshop on animal endocrinology held in Leuven (Belgium, 15 November 2000. ABSTRACTS

    Directory of Open Access Journals (Sweden)

    Renaville R. (Ed.

    2001-01-01

    Full Text Available The special topics of the workshop focused on leptin mechanism in ruminant and poultry. One of the essential roles of this hormone is to inform the organism about the level of fat reserves. The leptin gene is expressed in ruminants and poultry adipose tissues. Recent results on variations in plasma leptin and/or levels of leptin mRNA in adipose tissues show positive effects of body fatness and feeding level, and an inhibitory beta-adrenergic effect in cattle. In other respects, in vitro leptin production is stimulated by glucocorticoids and insulin, whose effects are inhibited by growth hormone. Progress in knowledge about leptin will allow to better understand and control the adaptations of energy metabolism and reproductive activity of ruminants to seasonal variations in day length and food supply, as well as variations in carcass fatness of growing animal.

  18. Workshop on technology issues of superconducting Maglev transportation systems

    Energy Technology Data Exchange (ETDEWEB)

    Wegrzyn, J.E. (Brookhaven National Lab., Upton, NY (United States)); Shaw, D.T. (New York State Inst. of Superconductivity, Buffalo, NY (United States))

    1991-09-27

    There exists a critical need in the United States to improve its ground transportation system. One suggested system that offers many advantages over the current transportation infrastructure is Maglev. Maglev represents the latest evolution in very high and speed ground transportation, where vehicles are magnetically levitated, guided, and propelled over elevated guideways at speeds of 300 miles per hour. Maglev is not a new concept but is, however, receiving renewed interest. The objective of this workshop was to further promote these interest by bringing together a small group of specialists in Maglev technology to discuss Maglev research needs and to identify key research issues to the development of a successful Maglev system. The workshop was organized into four sessions based on the following technical areas: Materials, Testing, and Shielding; Magnet Design and Cryogenic Systems; Propulsion and Levitation Systems; and, System Control and Integration.

  19. Report from the Light Water Reactor Sustainability Workshop on On-Line Monitoring Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Thomas Baldwin; Magdy Tawfik; Leonard Bond

    2010-06-01

    In support of expanding the use of nuclear power, interest is growing in methods of determining the feasibility of longer term operation for the U.S. fleet of nuclear power plants, particularly operation beyond 60 years. To help establish the scientific and technical basis for such longer term operation, the DOE-NE has established a research and development (R&D) objective. This objective seeks to develop technologies and other solutions that can improve the reliability, sustain the safety, and extend the life of current reactors. The Light Water Reactor Sustainability (LWRS) Program, which addresses the needs of this objective, is being developed in collaboration with industry R&D programs to provide the technical foundations for licensing and managing the long-term, safe, and economical operation of nuclear power plants. The LWRS Program focus is on longer-term and higher-risk/reward research that contributes to the national policy objectives of energy and environmental security. In moving to identify priorities and plan activities, the Light Water Reactor Sustainability Workshop on On-Line Monitoring (OLM) Technologies was held June 10–12, 2010, in Seattle, Washington. The workshop was run to enable industry stakeholders and researchers to identify the nuclear industry needs in the areas of future OLM technologies and corresponding technology gaps and research capabilities. It also sought to identify approaches for collaboration that would be able to bridge or fill the technology gaps. This report is the meeting proceedings, documenting the presentations and discussions of the workshop and is intended to serve as a basis for a plan which is under development that will enable the I&C research pathway to achieve its goals. Benefits to the nuclear industry accruing from On Line Monitoring Technology cannot be ignored. Information gathered thus far has contributed significantly to the Department of Energy’s Light Water Reactor Sustainability Program. DOE has

  20. PROCEEDINGS OF THE 1999 OIL HEAT TECHNOLOGY CONFERENCE AND WORKSHOP.

    Energy Technology Data Exchange (ETDEWEB)

    MCDONALD,R.J.

    1999-04-01

    The 1999 Oil Heat Technology Conference and Workshop, April 15-16 at Brookhaven National Laboratory (BNL) is sponsored by the U. S. Department of Energy, Office of Building Technology, State and Community Programs (DOEBTS). The meeting is also co-sponsored by the: Petroleum Marketers Association of America, New England Fuel Institute, Oilheat Manufacturers Association, National Association of Oil Heat Service Managers, New York State Energy Research and Development Authority, Empire State Petroleum Association, New York Oil Heating Association, Oil Heat Institute of Long Island, and the Pennsylvania Petroleum Association. BNL is proud to acknowledge all of our 1999 co-sponsors, without their help and support the conference would have been canceled due to budget restrictions. It is quite gratifying to see an industry come together to help support an activity like the technology conference, for the benefit of the industry as a whole. The 1999 Oil Heat Technology Conference and Workshop, will be the thirteenth since 1984, is a very valuable technology transfer activity supported by the ongoing Combustion Equipment Technology (Oilheat R and D) program at BNL. The foremost reason for the conference is to provide a platform for the exchange of information and perspectives among international researchers, engineers, manufacturers, service technicians, and marketers of oil-fired space-conditioning equipment. They will provide a conduit by which information and ideas can be exchanged to examine present technologies, as well as helping to develop the future course for oil heating advancement. These conferences also serve as a stage for unifying government representatives, researchers, fuel oil marketers, and other members of the oil-heat industry in addressing technology advancements in this important energy use sector.

  1. Report on the B-Fields at NIF Workshop Held at LLNL October 12-13, 2015

    Energy Technology Data Exchange (ETDEWEB)

    Fournier, K. B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Moody, J. D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-12-13

    A national ICF laboratory workshop on requirements for a magnetized target capability on NIF was held by NIF at LLNL on October 12 and 13, attended by experts from LLNL, SNL, LLE, LANL, GA, and NRL. Advocates for indirect drive (LLNL), magnetic (Z) drive (SNL), polar direct drive (LLE), and basic science needing applied B (many institutions) presented and discussed requirements for the magnetized target capabilities they would like to see. 30T capability was most frequently requested. A phased operation increasing the field in steps experimentally can be envisioned. The NIF management will take the inputs from the scientific community represented at the workshop and recommend pulse-powered magnet parameters for NIF that best meet the collective user requests. In parallel, LLNL will continue investigating magnets for future generations that might be powered by compact laser-B-field generators (Moody, Fujioka, Santos, Woolsey, Pollock). The NIF facility engineers will start to analyze compatibility of the recommended pulsed magnet parameters (size, field, rise time, materials) with NIF chamber constraints, diagnostic access, and final optics protection against debris in FY16. The objective of this assessment will be to develop a schedule for achieving an initial Bfield capability. Based on an initial assessment, room temperature magnetized gas capsules will be fielded on NIF first. Magnetized cryo-ice-layered targets will take longer (more compatibility issues). Magnetized wetted foam DT targets (Olson) may have somewhat fewer compatibility issues making them a more likely choice for the first cryo-ice-layered target fielded with applied Bz.

  2. Advanced Sensory Spacecraft Structures Workshop Held in Alexandria, Virginia on 10 February 1993

    Science.gov (United States)

    1993-05-01

    GLOSSARY A/D analog to digital ACTEX Advanced Control Technology Experiments I and II ARPA Advanced Research Projects Agency ASIC Application...Control Technology Experiments I and II ( ACTEX , pp. B-7 through B-12) has been a significant miniaturization and corresponding federation of control...11I-11 function of temperature, ultra-violet and other radiation exposure. Ted Nye indicated that this material could be utilized on ACTEX II at no

  3. The Third International Conference On Space Information Technology Held In Beijing

    Institute of Scientific and Technical Information of China (English)

    Bian Ji

    2009-01-01

    The Third International Conference on Space Information Technology (ICSIT) was held on November 27 in Beijing. The conference was hosted by China Academy of Space Technology (CAST) and organized by Space Star Technology Co., Ltd., co-organized by the Second Academy of Aerospace China and Huazhong University of Science and Technology.

  4. Preface: Workshop on Off-Grid Technology Systems

    Science.gov (United States)

    Alonso-Marroquin, Fernando

    2017-06-01

    Off-grid houses are dwellings that do not rely on water supply, sewer, or electrical power grid, and are able to operate independently of all public utility services. These houses are ideal for remote communities or population suffering natural or human-made disasters. Our aim is to develop compact and affordable off-grid technologies by integrating high-end nano-engineering with systems that imitates natural biological processes. The key areas of focus in the workshop were: solar energy harvesting using nanotechnology, wind energy harvesting from vertical-axis wind turbines, supercapacitors energy storage systems, treatment of greywater, and green roofs to achieve air comfort.

  5. Mobile health technology evaluation: the mHealth evidence workshop.

    Science.gov (United States)

    Kumar, Santosh; Nilsen, Wendy J; Abernethy, Amy; Atienza, Audie; Patrick, Kevin; Pavel, Misha; Riley, William T; Shar, Albert; Spring, Bonnie; Spruijt-Metz, Donna; Hedeker, Donald; Honavar, Vasant; Kravitz, Richard; Lefebvre, R Craig; Mohr, David C; Murphy, Susan A; Quinn, Charlene; Shusterman, Vladimir; Swendeman, Dallas

    2013-08-01

    Creative use of new mobile and wearable health information and sensing technologies (mHealth) has the potential to reduce the cost of health care and improve well-being in numerous ways. These applications are being developed in a variety of domains, but rigorous research is needed to examine the potential, as well as the challenges, of utilizing mobile technologies to improve health outcomes. Currently, evidence is sparse for the efficacy of mHealth. Although these technologies may be appealing and seemingly innocuous, research is needed to assess when, where, and for whom mHealth devices, apps, and systems are efficacious. In order to outline an approach to evidence generation in the field of mHealth that would ensure research is conducted on a rigorous empirical and theoretic foundation, on August 16, 2011, researchers gathered for the mHealth Evidence Workshop at NIH. The current paper presents the results of the workshop. Although the discussions at the meeting were cross-cutting, the areas covered can be categorized broadly into three areas: (1) evaluating assessments; (2) evaluating interventions; and (3) reshaping evidence generation using mHealth. This paper brings these concepts together to describe current evaluation standards, discuss future possibilities, and set a grand goal for the emerging field of mHealth research.

  6. Human embryonic stem cells and good manufacturing practice: Report of a 1- day workshop held at Stem Cell Biology Research Center, Yazd, 27(th) April 2017.

    Science.gov (United States)

    Akyash, Fatemeh; Sadeghian-Nodoushan, Fatemeh; Tahajjodi, Somayyeh Sadat; Nikukar, Habib; Farashahi Yazd, Ehsan; Azimzadeh, Mostafa; D Moore, Harry; Aflatoonian, Behrouz

    2017-05-01

    This report explains briefly the minutes of a 1-day workshop entitled; "human embryonic stem cells (hESCs) and good manufacturing practice (GMP)" held by Stem Cell Biology Research Center based in Yazd Reproductive Sciences Institute at Shahid Sadoughi University of Medical Sciences, Yazd, Iran on 27(th) April 2017. In this workshop, in addition to the practical sessions, Prof. Harry D. Moore from Centre for Stem Cell Biology, University of Sheffield, UK presented the challenges and the importance of the biotechnology of clinical-grade human embryonic stem cells from first derivation to robust defined culture for therapeutic applications.

  7. Demonstration and Deployment Strategy Workshop: Summary

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2014-05-01

    This report is based on the proceedings of the U.S. Department of Energy Bioenergy Technologies Office Demonstration and Deployment Strategy Workshop, held on March 12–13, 2014, at Argonne National Laboratory.

  8. Workshop on Adhesion and Intermolecular Forces Held in Alexandria, Virginia on 18-19 June 1992

    Science.gov (United States)

    1992-09-18

    films on the fluorinated polyimide 6FDA -ODA have the largest grain size and surface roughness. Q4 Characterization of Interface Chemistry and Adhesion...Interfacial Adhesion Studies of Polyimides with the Atom ic Force M icroscope ............................................. 93 J. P. Lu, P. V. Nagarkar, D...Maine Interfacial adhesion studies of polyimides with the scanning force microscope Jiong-Ping Lu, Massachussetts Institute of Technology

  9. International exchange project for the engineer exchange project (in coal mine technology area) in fiscal 1998. Overseas workshop; 1998 nendo gijutsusha koryu jigyo (tanko gijutsu bun'ya) kokusai koryu jigyo. Kaigai workshop

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The international exchange project for the engineer exchange project (in coal mine technology area) in fiscal 1998, the 'Overseas workshop' has performed exchange in technologies with Australian coal mine engineers. The project refers to the Australian technological levels and needs in coal production, safety control and environment, as well as transfer of the Japanese coal mine technologies. This report summarizes the result of a survey on the engineer exchange project in the coal mine technology area and the possibility of joint researches. The 'overseas workshop' was held in November 1998 for two days in Brisbane City in QLD Province as the 'Japan-Australia coal technology workshop'. The 'Japan-Australia coal technology workshop' gave lectures in five sessions (the basic lecture, Japan-Australia high-speed excavation project, coal mine gas control project, exploration and resources, and development and experience of Japan). It also discussed two themes (mine safety management and rules, and greenhouse effect gases and coal mining). Two coal mines were visited thereafter to deepen the exchange with the Australian coal mine engineers. (NEDO)

  10. Workshop report - Bridging the Climate Information held at Argonne National Laboratory September 29, 1999

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, J.

    2000-03-10

    In a recent report entitled The Regional Impacts of Climate Change it was concluded that the technological capacity to adapt to climate change is likely to be readily available in North America, but its application will be realized only if the necessary information is available (sufficiently far in advance in relation to the planning horizons and lifetimes of investments) and the institutional and financial capacity to manage change exists. The report also acknowledged that one of the key factors that limit the ability to understand the vulnerability of subregions of North America to climate change, and to develop and implement adaptive strategies to reduce that vulnerability, is the lack of accurate regional projections of climate change, including extreme events. In particular, scientists need to account for the physical-geographic characteristics (e.g., the Great Lakes, coastlines, and mountain ranges) that play a significant role in the North America climate and also need to consider the feedback between the biosphere and atmosphere.

  11. Workshop report - Bridging the Climate Information held at Argonne National Laboratory September 29, 1999

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, J.

    2000-03-10

    In a recent report entitled The Regional Impacts of Climate Change it was concluded that the technological capacity to adapt to climate change is likely to be readily available in North America, but its application will be realized only if the necessary information is available (sufficiently far in advance in relation to the planning horizons and lifetimes of investments) and the institutional and financial capacity to manage change exists. The report also acknowledged that one of the key factors that limit the ability to understand the vulnerability of subregions of North America to climate change, and to develop and implement adaptive strategies to reduce that vulnerability, is the lack of accurate regional projections of climate change, including extreme events. In particular, scientists need to account for the physical-geographic characteristics (e.g., the Great Lakes, coastlines, and mountain ranges) that play a significant role in the North America climate and also need to consider the feedback between the biosphere and atmosphere.

  12. 75 FR 64258 - Cloud Computing Forum & Workshop II

    Science.gov (United States)

    2010-10-19

    ... National Institute of Standards and Technology Cloud Computing Forum & Workshop II AGENCY: National... announces the Cloud Computing Forum & Workshop II to be held on November 4 and 5, 2010. This workshop will provide information on a Cloud Computing Roadmap Strategy as well as provide an updated status on NIST...

  13. Proceedings of the Annual ONR/CADRC Decision-Support Workshop (6th), Held in Quantico, Virginia, on 8-9 Sep 2004. Interoperability

    Science.gov (United States)

    2004-11-01

    based warfare and humanitarian relief operations. The first ONR Workshop was held April 20-22, 1999 at the Embassy Suites Hotel in San Luis Obispo...President/CEO of Pragati Synergetic Research Inc., an 8a cer t i f i ed , sma l l , woman-owned, disadvantaged business specializing in research and...Teams (RRT); and, a Los Angeles County Web Services Kiosk (WSK). Fundamental to each player are three notions. First, each player operates as an

  14. Engineer exchanging project on coal mine technology field in fiscal 1999. International information exchanging project (the overseas workshop in Vietnam); 1999 nendo gijutsusha koryu jigyo (tanko gijutsu bun'ya) kokusai koryu jigyo. Kaigai workshop (Vietnam)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Technical information exchange was performed with Vietnamese engineers related to coal mine technologies through the overseas workshop and the technical tour. At the same time, investigations were executed on the production technology levels and needs in Vietnam, and on possibilities of transfer of Japanese technologies. The 'Overseas workshop (Vietnam)' was held on September 28, 1999 with the 'trends and problems in coal production technologies' as the main theme. Lectures were given in the session related to coal production technologies by Vietnamese coal technology experts, each from VINACOAL and IMSAT, and by two Japanese coal technology experts. A comprehensive discussion was also executed, and items of technical information were exchanged on the coal production technologies. The number of persons actually participated in the workshop counted 58, with the proceedings presented by them distributed. The Mao Khe and Duong Huy coal mines in Quang Ninh Province were visited as the technical tour, whereas the coal mine sites were inspected and opinions were exchanged with the site engineers. Gas analysis was performed in the Mao Khe mine from the viewpoint of a gas control technology, and site investigation was carried out on lock bolts in the Duong Huy mine from the viewpoint of a roof control technology. (NEDO)

  15. Proceedings of the 1996 oil heat technology conference and workshop

    Energy Technology Data Exchange (ETDEWEB)

    McDonald, R.J.

    1996-07-01

    This Conference is a key technology transfer activity supported by the ongoing Combustion Equipment Technology (Oil-Heat R and D) program at BNL, and is aimed at providing a forum for the exchange of information among international researchers, engineers, manufacturers, and marketers of oil-fired space-conditioning equipment. The objectives of the Conference were to: identify and evaluate the state-of-the-art and recommend new initiatives for higher efficiency, a cleaner environment, and to satisfy consumer needs cost-effectively, reliably, and safely; and foster cooperation among federal and industrial representatives with the common goal of sustained national economic growth and energy security via energy conservation. The 1996 Oil Technology Conference comprised: (a) fourteen technical papers, and (b) four workshops which focused on mainstream issues in oil-heating technology, namely: oilheat research agenda forum; fan atomized burner commercialization, applications, and product development; fuel quality, storage and maintenance--industry discussion; and application of oil heat venting tables, NFPA 31 standard. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

  16. Cryogenic Fluid Management Technology Workshop. Volume 1: Presentation material and discussion

    Science.gov (United States)

    Aydelott, John C. (Editor); Devol, William (Editor)

    1987-01-01

    The major objective of the workshop was to identify future NASA needs for technology that will allow the management of subcritical cryogenic fluids in the low gravity space environment. Workshop participants were asked to identify those technologies which will require in-space experimentation and are thus candidates for inclusion in the flight experiment being defined at the Lewis Research Center.

  17. Workshop on Science and Technology Education and Productive Work. Final Report.

    Science.gov (United States)

    Ministry of Education, Addis Ababa (Ethiopia).

    This workshop was organized as a contribution to Ethiopia's human resettlement activities necessitated by the recurrent drought. The objectives of the workshop were to: (1) appraise the relevance of basic rural technologies and identify modalities of their application; (2) develop materials in the fields of biotechnology and basic technology; (3)…

  18. Current status and future perspectives of electron interactions with molecules, clusters, surfaces, and interfaces [Workshop on Fundamental challenges in electron-driven chemistry; Workshop on Electron-driven processes: Scientific challenges and technological opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Becker, Kurt H.; McCurdy, C. William; Orlando, Thomas M.; Rescigno, Thomas N.

    2000-09-01

    This report is based largely on presentations and discussions at two workshops and contributions from workshop participants. The workshop on Fundamental Challenges in Electron-Driven Chemistry was held in Berkeley, October 9-10, 1998, and addressed questions regarding theory, computation, and simulation. The workshop on Electron-Driven Processes: Scientific Challenges and Technological Opportunities was held at Stevens Institute of Technology, March 16-17, 2000, and focused largely on experiments. Electron-molecule and electron-atom collisions initiate and drive almost all the relevant chemical processes associated with radiation chemistry, environmental chemistry, stability of waste repositories, plasma-enhanced chemical vapor deposition, plasma processing of materials for microelectronic devices and other applications, and novel light sources for research purposes (e.g. excimer lamps in the extreme ultraviolet) and in everyday lighting applications. The life sciences are a rapidly advancing field where the important role of electron-driven processes is only now beginning to be recognized. Many of the applications of electron-initiated chemical processes require results in the near term. A large-scale, multidisciplinary and collaborative effort should be mounted to solve these problems in a timely way so that their solution will have the needed impact on the urgent questions of understanding the physico-chemical processes initiated and driven by electron interactions.

  19. Proceedings of the Nuclear Criticality Technology Safety Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Rene G. Sanchez

    1998-04-01

    This document contains summaries of most of the papers presented at the 1995 Nuclear Criticality Technology Safety Project (NCTSP) meeting, which was held May 16 and 17 at San Diego, Ca. The meeting was broken up into seven sessions, which covered the following topics: (1) Criticality Safety of Project Sapphire; (2) Relevant Experiments For Criticality Safety; (3) Interactions with the Former Soviet Union; (4) Misapplications and Limitations of Monte Carlo Methods Directed Toward Criticality Safety Analyses; (5) Monte Carlo Vulnerabilities of Execution and Interpretation; (6) Monte Carlo Vulnerabilities of Representation; and (7) Benchmark Comparisons.

  20. Hands-on workshops as an effective means of learning advanced technologies including genomics, proteomics and bioinformatics.

    Science.gov (United States)

    Reisdorph, Nichole; Stearman, Robert; Kechris, Katerina; Phang, Tzu Lip; Reisdorph, Richard; Prenni, Jessica; Erle, David J; Coldren, Christopher; Schey, Kevin; Nesvizhskii, Alexey; Geraci, Mark

    2013-12-01

    Genomics and proteomics have emerged as key technologies in biomedical research, resulting in a surge of interest in training by investigators keen to incorporate these technologies into their research. At least two types of training can be envisioned in order to produce meaningful results, quality publications and successful grant applications: (1) immediate short-term training workshops and (2) long-term graduate education or visiting scientist programs. We aimed to fill the former need by providing a comprehensive hands-on training course in genomics, proteomics and informatics in a coherent, experimentally-based framework. This was accomplished through a National Heart, Lung, and Blood Institute (NHLBI)-sponsored 10-day Genomics and Proteomics Hands-on Workshop held at National Jewish Health (NJH) and the University of Colorado School of Medicine (UCD). The course content included comprehensive lectures and laboratories in mass spectrometry and genomics technologies, extensive hands-on experience with instrumentation and software, video demonstrations, optional workshops, online sessions, invited keynote speakers, and local and national guest faculty. Here we describe the detailed curriculum and present the results of short- and long-term evaluations from course attendees. Our educational program consistently received positive reviews from participants and had a substantial impact on grant writing and review, manuscript submissions and publications.

  1. 76 FR 62373 - Notice of Public Meeting-Cloud Computing Forum & Workshop IV

    Science.gov (United States)

    2011-10-07

    ... National Institute of Standards and Technology Notice of Public Meeting--Cloud Computing Forum & Workshop...: NIST announces the Cloud Computing Forum & Workshop IV to be held on November 2, 3 and 4, 2011. This workshop will provide information on the U.S. Government (USG) Cloud Computing Technology Roadmap...

  2. Social Aspects of Bioenergy Sustainability Workshop Report

    Energy Technology Data Exchange (ETDEWEB)

    Luchner, Sarah [Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States); Johnson, Kristen [Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States); Lindauer, Alicia [Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States); McKinnon, Taryn [Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States); Broad, Max [Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States)

    2013-05-30

    The Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy Bioenergy Technologies Office held a workshop on “Social Aspects of Bioenergy” on April 24, 2012, in Washington, D.C., and convened a webinar on this topic on May 8, 2012. The findings and recommendations from the workshop and webinar are compiled in this report.

  3. The Neuroscience of Responsibility"-Workshop Report

    NARCIS (Netherlands)

    Vincent, N.A.; Haselager, W.F.G.; Lokhorst, G.J.

    2011-01-01

    This is a report on the 3-day workshop "The Neuroscience of Responsibility" that was held in the Philosophy Department at Delft University of Technology in The Netherlands during February 11th-13th, 2010. The workshop had 25 participants from The Netherlands, Germany, Italy, UK, USA, Canada and Aust

  4. Machine Learning Technologies and Their Applications for Science and Engineering Domains Workshop -- Summary Report

    Science.gov (United States)

    Ambur, Manjula; Schwartz, Katherine G.; Mavris, Dimitri N.

    2016-01-01

    The fields of machine learning and big data analytics have made significant advances in recent years, which has created an environment where cross-fertilization of methods and collaborations can achieve previously unattainable outcomes. The Comprehensive Digital Transformation (CDT) Machine Learning and Big Data Analytics team planned a workshop at NASA Langley in August 2016 to unite leading experts the field of machine learning and NASA scientists and engineers. The primary goal for this workshop was to assess the state-of-the-art in this field, introduce these leading experts to the aerospace and science subject matter experts, and develop opportunities for collaboration. The workshop was held over a three day-period with lectures from 15 leading experts followed by significant interactive discussions. This report provides an overview of the 15 invited lectures and a summary of the key discussion topics that arose during both formal and informal discussion sections. Four key workshop themes were identified after the closure of the workshop and are also highlighted in the report. Furthermore, several workshop attendees provided their feedback on how they are already utilizing machine learning algorithms to advance their research, new methods they learned about during the workshop, and collaboration opportunities they identified during the workshop.

  5. National Educators' Workshop: Update 1991. Standard Experiments in Engineering Materials Science and Technology

    Science.gov (United States)

    Gardner, James E. (Compiler); Jacobs, James A. (Compiler); Stiegler, James O. (Compiler)

    1992-01-01

    Given here is a collection of experiments presented and demonstrated at the National Educators' Workshop: Update 91, held at the Oak Ridge National Laboratory on November 12-14, 1991. The experiments related to the nature and properties of engineering materials and provided information to assist in teaching about materials in the education community.

  6. National Educators' Workshop: Update 1997. Standard Experiments in Engineering Materials, Science, and Technology

    Science.gov (United States)

    Gardner, James E. (Compiler); Freeman, Ginger L. (Compiler); Jacobs, James A. (Compiler); Miller, Alan G. (Compiler); Smith, Brian W. (Compiler)

    1998-01-01

    This document contains a collection of experiments presented and demonstrated at the National Educators' Workshop: Update 97, held at Boeing Commercial Airplane Group, Seattle, Washington, on November 2-5, 1997. The experiments related to the nature and properties of engineering materials and provided information to assist in teaching about materials in the education community.

  7. National Educators' Workshop: Update 1993. Standard Experiments in Engineering Materials Science and Technology

    Science.gov (United States)

    Gardner, James E. (Compiler); Jacobs, James A. (Compiler)

    1994-01-01

    This document contains a collection of experiments presented and demonstrated at the National Educators' Workshop: Update 93 held at the NASA Langley Research Center in Hampton, Virginia, on November 3-5, 1993. The experiments related to the nature and properties of engineering materials and provided information to assist in teaching about materials in the education community.

  8. Fiscal 1999 engineer exchange project (field of coal mining technology), international exchange project. Domestic workshop; 1999 nendo gijutsusha koryu jigyo (tanko gijutsu bun'ya) kokusai koryu jigyo. Kokunai workshop

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The domestic workshop invites Japanese engineers and engineers from coal producing countries for the exchange of coal mining technologies and aims to substantiate and facilitate the dispatching and receiving of engineers under training programs. The main subject of the Asia-Pacific coal technology workshop was 'Coal for the 21st century - resources and technology,' and there were two sessions held on September 8, titled 'Trends and tasks of coal resources exploitation' and 'Coal resources and production technology.' Lectures were delivered by five overseas and five Japanese coal engineering experts. On September 9, nine essays were presented concerning 'Coal resources and security problems' and 'Coal resources and environmental problems.' In addition, a panel discussion was held, titled 'Coal resources assessment and technology.' Importance was emphasized of the correct assessment of the magnitude of resources, development of probing technologies to collect more detailed information, improvement of digging speeds applicable to faces for large and high-efficiency mining, development of coal mining technologies for increased recovery, etc. Information was exchanged on various occasions and partnership was enhanced between the participants to the advantage of engineer exchanging projects in the future. (NEDO)

  9. 77 FR 6579 - Vendor Outreach Workshop for Small Information Technology (IT) Businesses in the National Capitol...

    Science.gov (United States)

    2012-02-08

    ... Office of the Secretary Vendor Outreach Workshop for Small Information Technology (IT) Businesses in the.... SUMMARY: The Office of Small and Disadvantaged Business Utilization of the Department of the Interior is hosting a Vendor Outreach Workshop for small IT businesses in the National Capitol region of the...

  10. Proceedings of the 1st Workshop on Technology Support for Self-Organized Learners

    NARCIS (Netherlands)

    Kalz, Marco; Koper, Rob; Hornung-Prähauser, Veronika; Luckmann, Michaela

    2008-01-01

    Kalz, M., Koper, R., Hornung-Prähauser, V., & Luckmann, M. (Eds.) (2008). Proceedings of the 1st Workshop on Technology Support for Self-Organized Learners. June, 2-3, 2008, Salzburg, Austria: CEUR Workshop Proceedings, ISSN 1613-0073. Available at http://ceur-ws.org/Vol-349.

  11. 'Enlivening' Development Concepts through Workshops: A Case Study of Appropriate Technology and Soil Conservation.

    Science.gov (United States)

    Jones, Samantha

    2000-01-01

    Describes a workshop designed to communicate to students the idea of appropriate technology in soil conservation enabling them to experience concepts in the geography of development. Explains that the workshop was evaluated by students using open and closed style questions. Includes references. (CMK)

  12. Marine and Hydrokinetic Technology (MHK) Instrumentation, Measurement, and Computer Modeling Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Musial, W. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Lawson, M. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Rooney, S. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2013-02-01

    The Marine and Hydrokinetic Technology (MHK) Instrumentation, Measurement, and Computer Modeling Workshop was hosted by the National Renewable Energy Laboratory (NREL) in Broomfield, Colorado, July 9–10, 2012. The workshop brought together over 60 experts in marine energy technologies to disseminate technical information to the marine energy community, and to collect information to help identify ways in which the development of a commercially viable marine energy industry can be accelerated. The workshop was comprised of plenary sessions that reviewed the state of the marine energy industry and technical sessions that covered specific topics of relevance. Each session consisted of presentations, followed by facilitated discussions. During the facilitated discussions, the session chairs posed several prepared questions to the presenters and audience to encourage communication and the exchange of ideas between technical experts. Following the workshop, attendees were asked to provide written feedback on their takeaways from the workshop and their best ideas on how to accelerate the pace of marine energy technology development. The first four sections of this document give a general overview of the workshop format, provide presentation abstracts, supply discussion session notes, and list responses to the post-workshop questions. The final section presents key findings and conclusions from the workshop that suggest what the most pressing MHK technology needs are and how the U.S. Department of Energy (DOE) and national laboratory resources can be utilized to assist the marine energy industry in the most effective manner.

  13. Transfer of computer software technology through workshops: The case of fish bioenergetics modeling

    Science.gov (United States)

    Johnson, B.L.

    1992-01-01

    A three-part program is proposed to promote the availability and use of computer software packages to fishery managers and researchers. The approach consists of journal articles that announce new technologies, technical reports that serve as user's guides, and hands-on workshops that provide direct instruction to new users. Workshops, which allow experienced users to directly instruct novices in software operation and application are important, but often neglected. The author's experience with organizing and conducting bioenergetics modeling workshops suggests the optimal workshop would take 2 days, have 10-15 participants, one computer for every two users, and one instructor for every 5-6 people.

  14. An AHP-based evaluation method for teacher training workshop on information and communication technology.

    Science.gov (United States)

    Lucas, Rochelle Irene; Promentilla, Michael Angelo; Ubando, Aristotle; Tan, Raymond Girard; Aviso, Kathleen; Yu, Krista Danielle

    2017-08-01

    The emergence of information and communication technology (ICT) has created opportunities for enhancing the learning process at different educational levels. However, its potential benefits can only be fully realized if teachers are properly trained to utilize such tools. The rapid evolution of ICT also necessitates rigorous assessment of training programs by participants. Thus, this study proposes an evaluation framework based on the Analytic Hierarchy Process (AHP) to systematically evaluate such workshops designed for teachers. The evaluation model is decomposed hierarchically into four main criteria namely: (1) workshop design, (2) quality of content of the workshop, (3) quality of delivery of the content of the workshop, and the (4) relevance of the workshop. These criteria are further disaggregated into 24 sub-indicators to measure the effectiveness of the workshop as perceived by the participants based on their own expectations. This framework is applied to a case study of ICT workshops done in the Philippines. In this case, relevance of the workshop is found to be the most important main criterion identified by the participants, particularly on the new ICT knowledge that promotes teachers' professional growth and development. The workshop evaluation index (WEI) is also proposed as a metric to support decision-making by providing a mechanism for benchmarking performance, tracking improvement over time, and developing strategies for the design and improvement of training programs or workshops on ICT for teachers. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. International workshop on Chromosome 12 held at St. Catherine`s College, Oxford, England, September 18--20, 1992. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Gemmill, R.

    1992-12-31

    The First International Mapping Workshop on Human Chromosome 12 was held on Sept. 18--20, 1992, at St Catherine`s College, Oxford, UK. The meeting was hosted by Ian Craig and organized by Drs. Craig, Gemmill and Kutcherlapati. It was attended by 50 participants primarily from Europe and the USA. The workshop was highly successful and achieved the major goal of fostering direct and personal interactions between investigators with strong research interests in this chromosome. Participants reviewed the status of several critical aspects of chromosome mapping and prepared consensus views of the current state of knowledge. In addition, lists of resources available for this chromosome including somatic cell hybrids, individual DNA clones and libraries and genetic markers were prepared.

  16. Advanced Technologies for Robotic Exploration Leading to Human Exploration: Results from the SpaceOps 2015 Workshop

    Science.gov (United States)

    Lupisella, Mark L.; Mueller, Thomas

    2016-01-01

    This paper will provide a summary and analysis of the SpaceOps 2015 Workshop all-day session on "Advanced Technologies for Robotic Exploration, Leading to Human Exploration", held at Fucino Space Center, Italy on June 12th, 2015. The session was primarily intended to explore how robotic missions and robotics technologies more generally can help lead to human exploration missions. The session included a wide range of presentations that were roughly grouped into (1) broader background, conceptual, and high-level operations concepts presentations such as the International Space Exploration Coordination Group Roadmap, followed by (2) more detailed narrower presentations such as rover autonomy and communications. The broader presentations helped to provide context and specific technical hooks, and helped lay a foundation for the narrower presentations on more specific challenges and technologies, as well as for the discussion that followed. The discussion that followed the presentations touched on key questions, themes, actions and potential international collaboration opportunities. Some of the themes that were touched on were (1) multi-agent systems, (2) decentralized command and control, (3) autonomy, (4) low-latency teleoperations, (5) science operations, (6) communications, (7) technology pull vs. technology push, and (8) the roles and challenges of operations in early human architecture and mission concept formulation. A number of potential action items resulted from the workshop session, including: (1) using CCSDS as a further collaboration mechanism for human mission operations, (2) making further contact with subject matter experts, (3) initiating informal collaborative efforts to allow for rapid and efficient implementation, and (4) exploring how SpaceOps can support collaboration and information exchange with human exploration efforts. This paper will summarize the session and provide an overview of the above subjects as they emerged from the SpaceOps 2015

  17. Inspection Workshop-6: OSI Technologies: Methodologies and Techniques for Application

    Energy Technology Data Exchange (ETDEWEB)

    Krioutchenkov, V.; Shchukin, V.; Sweeney, J.J.

    2000-09-14

    On-Site Inspection (OSI) Workshop-6 met 26-30 June 2000 in Vienna, hosted by the Provisional Technical Secretariat (PTS) of the CTBT Organization. The purpose of the workshop was to provide guidance on OSI Operational Manual (OM) development for Working Group B (WGB) of the CTBT preparatory Commission (PrepCom) in the general areas of equipment and logistics. The two main sessions of this workshop, titled ''OSI Equipment: Development of Functional and Operational Requirements, Specifications and Application Procedures'' and ''OSI Logistics: Continued Work on Standing Arrangements, Status of Inspectors and Support Equipment Issues'' reflected this focus. For this workshop, the schedule of work was divided into two parts: The first half of the week were sessions with formal paper presentations and discussion; the latter half of the week used two smaller subgroups to focus on and discuss separately equipment and logistics issues. Drawing heavily on the results of the five previous workshops, these subgroups produced material to be considered by Working Group B. This provisional material is intended to advance the process of equipment definition and procurement and establish procedures for logistics that can be incorporated into the OSI Operational Manual. The participants agreed that using subgroups in this workshop was an especially effective mechanism for discussion of different expert opinion on technical issues, and that having access to material presented at the previous five OSI workshops was particularly valuable.

  18. Workshop on gas potential of New Albany shale held in conjunction with the 1995 Ioga meeting in Evansville, Indiana on March 1, 1995. Topical report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-01-01

    This workshop is intended to provide an overview of the organic lithofacies, organic carbon content, thermal maturity, and gas potential of the Devonian and Mississippian New Albany Shale in the Illinois Basin. In addition, the reservoir characteristics and completion technology for productive organic-rich Devonian shales in the Michigan and Appalachian Basins are also reviewed. Emphasis is being placed on how proven technologies together with appropriate geologic and geochemical information can be used to explore for gas in the New Albany Shale.

  19. The 2nd International Conference for Spatial Information Technology was Held in Huazhong University of Science and Technology

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ The Second International Conference for Spatial Information Technology 2007(ICSIT 2007) was held in Huazhong University of Science and Technology from 9 to 11 november 2007, which was co-sponsored by the Spatial Technology Academy of China Aerospace Science & Technology Corporation, the Third Academy of China Aerospace Science & Technology, the Eighth Academy of CASTC, the Unmanned Air Vehicle Society of Chinese Society of Astronautics, Qinghua University, National University of Defense Technology,Harbin Institute of Technology, Beijing University of Aeronautics and Astronautics, Northwestern Polytechnical University, University of Electronic Science and Technology of China, Huazhong University of Science and Technology and the Second Academy of CASIC, and was jointly directed by Huazhong University of Science and Technology and the Second Academy of CASIC. This grand meeting attracted more than 260 specialists hailed from home and abroad to attend, and was financially aided by the National Natural Science Foundation of China and the International Cooperation and Exchange Department of the Ministry of Education.

  20. National Educators' Workshop: Update 2002 - Standard Experiments in Engineering, Materials Science, and Technology

    Science.gov (United States)

    Prior, Edwin J. (Compiler); Jacobs, James A. (Compiler); Chung, W. Richard (Compiler)

    2003-01-01

    This document contains a collection of experiments presented and demonstrated at the National Educators' Workshop: Update 2002 held in San Jose, California, October 13-16,2002. This publication provides experiments and demonstrations that can serve as a valuable guide to faculty who are interested in useful activities for their students. The material was the result of years of research aimed at better methods of teaching technical subjects. The experiments developed by faculty, scientists, and engineers throughout the United States and abroad add to the collection from past workshops. They include a blend of experiments on new materials and traditional materials.

  1. High Resolution Infrared Spectroscopy in Astronomy Proceedings of an ESO Workshop Held at Garching, Germany, 18-21 November 2003

    CERN Document Server

    Käufl, Hans Ulrich; Moorwood, Alan F. M

    2005-01-01

    Two specialized new instruments for ESO's VLT, VISIR and CRIRES, spawned the idea for this workshop. CRIRES is a dedicated very high resolution infrared spectrograph; VISIR features a high resolution spectroscopic mode. Together, the instruments combine the sensitivity of an 8m-telescope with the now well-established reliability of VLT-facility instruments. High resolution here means that lines in cool stellar atmospheres and HII-regions can be resolved. The astrophysical topics discussed in this rather specialized workshop range from the inner solar system to active galactic nuclei. There are many possibilities for new discoveries with these instruments, but the unique capability, which becomes available through high-resolution infrared spectroscopy, is the observation of molecular rotational-vibrational transitions in many astrophysical environments. Particularly interesting and surprising in this context, many papers on modeling and laboratory spectroscopy at the workshop appear to indicate that astronomic...

  2. Marine and Hydrokinetic Technology (MHK) Instrumentation, Measurement, and Computer Modeling Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Musial, W.; Lawson, M.; Rooney, S.

    2013-02-01

    The Marine and Hydrokinetic Technology (MHK) Instrumentation, Measurement, and Computer Modeling Workshop was hosted by the National Renewable Energy Laboratory (NREL) in Broomfield, Colorado, July 9-10, 2012. The workshop brought together over 60 experts in marine energy technologies to disseminate technical information to the marine energy community and collect information to help identify ways in which the development of a commercially viable marine energy industry can be accelerated. The workshop was comprised of plenary sessions that reviewed the state of the marine energy industry and technical sessions that covered specific topics of relevance. Each session consisted of presentations, followed by facilitated discussions. During the facilitated discussions, the session chairs posed several prepared questions to the presenters and audience to encourage communication and the exchange of ideas between technical experts. Following the workshop, attendees were asked to provide written feedback on their takeaways and their best ideas on how to accelerate the pace of marine energy technology development. The first four sections of this document give a general overview of the workshop format, provide presentation abstracts and discussion session notes, and list responses to the post-workshop questions. The final section presents key findings and conclusions from the workshop that suggest how the U.S. Department of Energy and national laboratory resources can be utilized to most effectively assist the marine energy industry.

  3. Educational Technology Training Workshops for Mathematics Teachers: An Exploration of Perception Changes

    Science.gov (United States)

    Lau, Wilfred Wing Fat; Yuen, Allan Hoi Kau

    2013-01-01

    This study examined the effects of educational technology training workshops on perception changes of mathematics teachers. Three perceptions, namely, pedagogical orientation, efficacy, and liking in relation to technology integration, were explored in this study. Two research questions were addressed: Do educational technology training workshops…

  4. Highlights from the Indo-US workshop "Cyanobacteria: molecular networks to biofuels" held at Lonavala, India during December 16-20, 2012.

    Science.gov (United States)

    Sherman, Louis A; Wangikar, Pramod P; Swarup, Renu; Kasture, Sangita

    2013-11-01

    An Indo-US workshop on "Cyanobacteria: molecular networks to biofuels" was held December 16-20, 2012 at Lagoona Resort, Lonavala, India. The workshop was jointly organized by two of the authors, PPW, a chemical engineer and LAS, a biologist, thereby ensuring a broad and cross-disciplinary participation. The main objective of the workshop was to bring researchers from academia and industry of the two countries together with common interests in cyanobacteria or microalgae and derived biofuels. An exchange of ideas resulted from a series of oral and poster presentations and, importantly, through one-on-one discussions during tea breaks and meals. Another key objective was to introduce young researchers of India to the exciting field of cyanobacterial physiology, modeling, and biofuels. PhD students and early stage researchers were especially encouraged to participate and about half of the 75 participants belonged to this category. The rest were comprised of senior researchers, including 13-15 invited speakers from each country. Overall, twenty-four institutes from 12 states of India were represented. The deliberations, which are being compiled in the present special issue, revolved mainly around molecular aspects of cyanobacterial biofuels including metabolic engineering, networks, genetic regulation, circadian rhythms, and stress responses. Representatives of some key funding agencies and industry provided a perspective and opportunities in the field and for bilateral collaboration. This article summarizes deliberations that took place at the meeting and provides a bird's eye view of the ongoing research in the field in the two countries.

  5. IWPT 2001 7th International Workshop on Parsing Technologies

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    http://www.icl.pku.edu.cn/iwpt2001.html    The Institute of Computational Linguistics, Peking University, Beijing,China, will host the 7th International Workshop on Parsing Technologies (IWPT2001) from 17 to 19 October, 2001.    Topics of interest for IWPT2001   Topics of interest for IWPT2001 include, but are not limited to: theoretical and practical studies of parsing algorithms for natural language sentences, texts, fragments, dialogues, ill-formed sentences, speech input, multi-dimensional (pictorial) languages, multimedia(web) documents, and parsing issues arising or viewed in a multimodal context. Both grammar-based and statistical approaches are welcome.   Prospective authors are invited to send submissions to the IWPT2001 programme chairman Giorgio Satta. Papers must be in the format given at the IWPT2001 home pages. Full papers should not exceed 12 pages; short papers should not exceed 1500 words. Submission is electronically, in postscript form. Only in case electronic submission is impossible, four (4) hard copies of the paper should be sent. Send papers to:      iwpt2001@dei.unipd.it   Giorgio Satta (IWPT2001 programme chair)   Universita`di Padova   Dipartimento di Elettronica e Informatica   via Gradenigo 6/A   I-35131 Padova, Italy      Time schedule: Deadline for paper submission: June 5 Notification of acceptance: July 18 Final papers due: August 27

  6. 77 FR 74829 - Notice of Public Meeting-Cloud Computing and Big Data Forum and Workshop

    Science.gov (United States)

    2012-12-18

    ... National Institute of Standards and Technology Notice of Public Meeting--Cloud Computing and Big Data Forum...) announces a Cloud Computing and Big Data Forum and Workshop to be held on Tuesday, January 15, Wednesday... workshop. The NIST Cloud Computing and Big Data Forum and Workshop will bring together leaders and...

  7. 76 FR 29195 - National Strategy for Trusted Identities in Cyberspace (NSTIC) Governance Workshop

    Science.gov (United States)

    2011-05-20

    ... (NSTIC) Governance Workshop AGENCY: National Institute of Standards & Technology (NIST), Commerce. ACTION... Cyberspace (NSTIC) Governance Workshop to be held on Thursday, June 9, 2011, 9 a.m. until 5 p.m. and Friday, June 10, 2011, 9 a.m. until 5 p.m. This workshop will identify and discuss various governance models...

  8. Workshop on body composition in basic and clinical research and the emerging technologies

    Energy Technology Data Exchange (ETDEWEB)

    Wielopolski, L.

    2000-12-14

    A special one-day workshop was held to review the status, the need for, and the future role of BNL in the Body Composition Analysis Program (BCAP). Two speakers succinctly outlined the status and future new developments using gamma nuclear resonance technology as it applies to BCAP. Seven speakers from three institutions outlined the continued need for BCAP and presented new clinical applications of BCAP in theirs respective fields of expertise. Extensive increase in the use of surrogate instrumentation, e.g., DXA and BIA, in BCAP was recognized as a significant contributing factor to the growth in BCAP. The growing role of MRI in BCAP was also emphasized. In light of these developments BCAP at BNL, with its specialized In Vivo Neutron Activation (IVNA) facilities, was recognized as a unique user oriented resource that may serve the community hospitals in the area. Three regional large institutions expressed their desire to use these facilities. In addition, IVNA provides direct measure of the human compartments in vivo, thus providing a gold standard for the surrogate methodologies that are in use or to be developed. It was strongly felt that there is a need for a calibration center with a national stature for the different methodologies for in vivo measurements, a role that befits very well a national laboratory. This offers an exquisite justification for DOE to support this orphan technology and to develop BCAP at BNL to, 1, provide a user oriented regional resource, 2, provide a national reference laboratory, and 3, develop new advanced technologies for BCAP.

  9. Workshop on a proposed safety goal held at Harpers Ferry, West Virginia on July 23-24, 1981

    Energy Technology Data Exchange (ETDEWEB)

    1981-09-01

    The objective of the Workshop was to consider the reference safety goal statement, and address some of the concerns related to qualitative and quantitative elements, and economic, ethical, social, and political issues that had been raised. It was hoped that the discussions would provide a basis for improving the soundness and usefulness of the draft safety goal statement.

  10. 8th International Symposium on Intelligent Distributed Computing & Workshop on Cyber Security and Resilience of Large-Scale Systems & 6th International Workshop on Multi-Agent Systems Technology and Semantics

    CERN Document Server

    Braubach, Lars; Venticinque, Salvatore; Badica, Costin

    2015-01-01

    This book represents the combined peer-reviewed proceedings of the Eight International Symposium on Intelligent Distributed Computing - IDC'2014, of the Workshop on Cyber Security and Resilience of Large-Scale Systems - WSRL-2014, and of the Sixth International Workshop on Multi-Agent Systems Technology and Semantics- MASTS-2014. All the events were held in Madrid, Spain, during September 3-5, 2014. The 47 contributions published in this book address several topics related to theory and applications of the intelligent distributed computing and multi-agent systems, including: agent-based data processing, ambient intelligence, collaborative systems, cryptography and security, distributed algorithms, grid and cloud computing, information extraction, knowledge management, big data and ontologies, social networks, swarm intelligence or videogames amongst others.

  11. Proceedings of a workshop on American Eel passage technologies

    Science.gov (United States)

    Haro, Alexander J.

    2013-01-01

    can effectively pass thousands of individuals in a season (Appendix D). technologies for preventing impingement and entrainment mortality and injury of downstream migrant eels at hydropower projects are not well developed. Traditional downstream fish passage mitigative techniques originally developed for salmonids and other species are frequently ineffective passing eels (Richkus and Dixon 2003, EPRI 2001, Bruijs and Durif 2009). Large hydropower projects, with high project flows or intake openings that cannot be fitted with racks or screens with openings small enough to exclude eels, pose significant passage problems for this species, and turbine impingement and entrainment mortality of eels can be as high as 100%. Spill mortality and injury may also be significant for eels, given their tendency to move during high flow events when projects typically spill large amounts of flow. Delays in migration of eels that have difficulty locating and utilizing bypass entrances can also be significant. Therefore, downstream passage technologies are at a much more nebulous state of development than upstream passage technologies, and require further evaluation and improvement before rigorous design guidelines can be established. There have been few studies conducted to evaluate effectiveness of current mitigative measures for both upstream and downstream passage of eels. Research is needed to determine eel migratory timing, behavior, and appropriate mitigation technologies for specific sites and eel life history stages. Both upstream and downstream eel passage structures can be difficult to evaluate in terms of performance, and examples of how evaluation and monitoring can be accomplished were reviewed at the workshop.

  12. Results of a Wildlife Toxicology Workshop held by the Smithsonian Institution ? Identification and prioritization of problem statements

    Science.gov (United States)

    Grim, K.C.; Fairbrother, A.; Monfort, S.; Tan, S.; Rattner, B.A.; Gerould, S.; Beasley, V.; Aguirre, A.; Rowles, T.

    2007-01-01

    On March 13-15, 2007 nearly 50 scientists and administrators from the US and Canada participated in a Smithsonian-sponsored Wildlife Toxicology Workshop. Invitees were from academic, government, conservation and the private organizations and were selected to represent the diverse disciplines that encompass wildlife toxicology. The workshop addressed scientific and policy issues, strengths and weaknesses of current research strategies, interdisciplinary and science-based approaches in the study of complex contaminant issues, mechanisms for disseminating data to policy-makers, and the development of a partner network to meet the challenges facing wildlife toxicology over the next decade. Prior to the meeting, participants were asked to submit issues they deemed to be of highest concern which shaped four thematic groups for discussion: Wildlife Toxicology in Education, Risk Assessment, Multiple Stressors/Complex Mixtures, and Sub-Lethal to Population-Level Effects. From these discussion groups, 18 problem statements were developed and prioritized outlining what were deemed the most important issues to address now and into the future. Along with each problem statement participants developed potential solutions and action steps geared to move each issue forward. The workshop served as a stepping stone for action in the field of wildlife toxicology. These problem statements and the resulting action items are presented to the inter-disciplinary wildlife toxicology community for adoption, and future work and action items in these areas are encouraged. The workshop outcome looks to generate conversation and collaboration that will lead to the development of innovative research, future mechanisms for funding, workshops, working groups, and listserves within the wildlife toxicology community.

  13. Mineral Processing Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2000-09-01

    This document represents the roadmap for Processing Technology Research in the US Mining Industry. It was developed based on the results of a Processing Technology Roadmap Workshop sponsored by the National Mining Association in conjunction with the US Department of Energy, Office of Energy Efficiency and Renewable Energy, Office of Industrial Technologies. The Workshop was held January 24 - 25, 2000.

  14. Introduction to geospatial semantics and technology workshop handbook

    Science.gov (United States)

    Varanka, Dalia E.

    2012-01-01

    The workshop is a tutorial on introductory geospatial semantics with hands-on exercises using standard Web browsers. The workshop is divided into two sections, general semantics on the Web and specific examples of geospatial semantics using data from The National Map of the U.S. Geological Survey and the Open Ontology Repository. The general semantics section includes information and access to publicly available semantic archives. The specific session includes information on geospatial semantics with access to semantically enhanced data for hydrography, transportation, boundaries, and names. The Open Ontology Repository offers open-source ontologies for public use.

  15. 2011 Alkaline Membrane Fuel Cell Workshop Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Pivovar, B.

    2012-02-01

    A workshop addressing the current state-of-the-art in alkaline membrane fuel cells (AMFCs) was held May 8-9, 2011, at the Crystal Gateway Marriott in Arlington, Virginia. This workshop was the second of its kind, with the first being held December 11-13, 2006, in Phoenix, Arizona. The 2011 workshop and associated workshop report were created to assess the current state of AMFC technology (taking into account recent advances), investigate the performance potential of AMFC systems across all possible power ranges and applications, and identify the key research needs for commercial competitiveness in a variety of areas.

  16. Food Security in Southwest Pacific Island Countries; Proceedings of a Workshop Held in Sydney, Australia, December 12-13, 2000

    OpenAIRE

    Simatupang, Pantjar; Fleming, Euan M.

    2001-01-01

    This proceedings is a record of a regional workshop on "Food Security in the Southwest Pacific Island Countries", convened to discuss the findings and strategies achieved in a two-year research project "Food Security Strategies for Selected South Pacific Island Countries". The national experts of the participating countries: Fiji, Papua New Guinea, Tonga and Vanuatu, presented reports of their country studies and the commentators from each country provided additional information.

  17. Proceedings of the Military Librarians’ Workshop (18th) Held at Fort Hauchuca, Arizona on 10-12 September 1974

    Science.gov (United States)

    1974-09-12

    in the proceedings. 4R6 OR~ CONTENTS Page Foreword ii Program iv Welcome I Special Command Briefing 3 Workshop Sessions 11 "Some Unwritten History of...Ms. Cathryn Lyon 34 NEW OEVELOPMENTS AT DDC . . . . Mr. Paul Klinefelter 35 Reminiscing . . . . Mr. Ernest DeWald 37 Participants 49 Sponsors of...Talk by Dr. Bruno Rolak, USACC Historian "Some Unwritten History of I Fort Huachuca" 0900-1100 Working Groups Ramada Inn Academic Earl SchwasG General

  18. Presentations from the Workshop on Data Collection in Organic Agriculture, held at the 17th IFOAM Organic World Congress

    OpenAIRE

    Willer, Helga; Mitchell, Alexandra; Ong, Kung Wai

    2011-01-01

    At this workshop the following papers were presented and discussed * Data collection on organic agriculture world-wide Status of collection activities, tools developed. Helga Willer, FiBL * Collection of data on the domestic market: Case Study Japan. Heinz Kuhlmann, BioFach Japan * Collection of data on the domestic market: Case study Australia. Alexandra Mitchell, University of Armidale Australia * Data collection on organic agriculture in Asia. Current status. Ong Kung Wai, I...

  19. NASA Workshop on Technology for Human Robotic Exploration and Development of Space

    Science.gov (United States)

    Mankins, J. C.; Marzwell, N.; Mullins, C. A.; Christensen, C. B.; Howell, J. T.; O'Neil, D. A.

    2004-01-01

    Continued constrained budgets and growing interests in the industrialization and development of space requires NASA to seize every opportunity for assuring the maximum return on space infrastructure investments. This workshop provided an excellent forum for reviewing, evaluating, and updating pertinent strategic planning, identifying advanced concepts and high-risk/high-leverage research and technology requirements, developing strategies and roadmaps, and establishing approaches, methodologies, modeling, and tools for facilitating the commercial development of space and supporting diverse exploration and scientific missions. Also, the workshop addressed important topic areas including revolutionary space systems requiring investments in innovative advanced technologies; achieving transformational space operations through the insertion of new technologies; revolutionary science in space through advanced systems and new technologies enabling experiments to go anytime to any location; and, innovative and ambitious concepts and approaches essential for promoting advancements in space transportation. Details concerning the workshop process, structure, and results are contained in the ensuing report.

  20. Introduction to the Workshop on Software Technology Transfer in Software Engineering

    NARCIS (Netherlands)

    Harrison, Warren; Wieringa, Roel

    2006-01-01

    The goal of the Workshop on Technology Transfer in Software Engineering is to increase our understanding of technology transfer in software engineering, and to learn from successful case studies. We wanted to bring researchers and practitioners together to create an inventory of problems in software

  1. Proceedings of the 2nd Workshop on Awareness and Reflection in Technology-Enhanced Learning

    NARCIS (Netherlands)

    Moore, Adam; Pammer, Viktoria; Pannese, Lucia; Prilla, Michael; Rajagopal, Kamakshi; Reinhardt, Wolfgang; Ullman, Thomas; Voigt, Christian

    2013-01-01

    Moore, A., Pammer, V., Pannese, L., Prilla, M., Rajagopal, K., Reinhardt, W., Ullman, Th. D., & Voigt, Ch. (Eds.) (2012). Proceedings of the 2nd Workshop on Awareness and Reflection in Technology Enhanced Learning. In conjunction with the 7th European Conference on Technology Enhanced Learning: 21st

  2. 76 FR 14010 - Public Workshop: Debt Collection 2.0: Protecting Consumers as Technologies Change

    Science.gov (United States)

    2011-03-15

    ..., communication, and payment technologies. Workshop panelists will discuss, among other things, the effects that... communication then available. Technological advances have expanded the tools available to debt collection... since then, such as the increasing popularity of social media networking sites.\\3\\ Facebook, which...

  3. Modellierung of meso- and macroscale river basins - a workshop held at Lauenburg; Modellierung in meso- bis makroskaligen Flusseinzugsgebieten - Tagungsband zum gleichnamigen Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Sutmoeller, J.; Raschke, E. (eds.) [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Inst. fuer Atmosphaerenphysik

    2001-07-01

    During the past decade measuring and modelling of global and regional processes that exchange energy and water in the climate system of the Earth became a focus in hydrological and meteorological research. Besides climate research many more applications will gain from this effort, e.g. as weather forecasting, water management and agriculture. As large scale weather and climate applications diversify to water related issues such as water resources, reservoir management, and flood and drought forecasting hydrologists and meteorologists are challenged to work interdisciplinary. The workshop 'Modelling of meso- and macroscale river basins' brought together various current aspects of this issue, ranging from coupled atmosphere-hydrology models to integrated river basin management to land use change. Recent results are introduced and summarised in this report. (orig.)

  4. 76 FR 13984 - Cloud Computing Forum & Workshop III

    Science.gov (United States)

    2011-03-15

    ... National Institute of Standards and Technology Cloud Computing Forum & Workshop III AGENCY: National... announces the Cloud Computing Forum & Workshop III to be held on April 7 and 8, 2011. The event will include... tactical Cloud Computing program, including progress on the NIST efforts to advance open standards in...

  5. Workshop on moisture buffer capacity

    DEFF Research Database (Denmark)

    2003-01-01

    Summary report of a Nordtest workshop on moisture buffer capacity held at Copenhagen August 21-22 2003......Summary report of a Nordtest workshop on moisture buffer capacity held at Copenhagen August 21-22 2003...

  6. Proceedings of the Armenian-Iranian Astronomical Workshop, held on 13-16 October 2015 in Byurakan, Armenia. Eds.: A. M. Mickaelian, H. G. Khosroshahi, H. A. Harutyunian.

    Science.gov (United States)

    Mickaelian, A. M.; Khosroshahi, H. G.; Harutyunian, H. A. (Eds.)

    2016-09-01

    An Armenian-Iranian Astronomical Workshop (AIAW) was organized on 13-16 October 2015 in Byurakan, Armenia aimed at strengthening scientific relations between Armenian and Iranian astronomers and establishing new collaborations. A number of such mutual colloquia were held before between the Armenian and Georgian astronomers (in Byurakan, Armenia and Abastumani, Georgia) and the previous experience and format were used for better organization of AIAW. The organizers and sponsors were: NAS RA V. Ambartsumian Byurakan Astrophysical Observatory (BAO, Armenia), Armenian Astronomical Society (ArAS, the Workshop was also combined with ArAS XIV Annual Meeting), Astronomical Society of Iran (ASI) and Institute for Research in Fundamental Sciences (IPM, Tehran, Iran). There was a representative Scientific Organizing Committee (SOC) of 13 members from Armenia and Iran. There were 30 Armenian and 16 Iranian participants, as well as the Director of Abastumani Astrophysical Observatory (AAO) was also invited as the representative of Georgia. The scientific program consisted of 18 invited and 22 contributed talks and 4 posters. Invited talks by senior scientists were given on each topic followed by a number of contributed ones, as well as posters were presented and discussed. The Volume consists of 4 sections: 1) Astronomy in South West Asia (Armenia, Iran and Georgia); 2) Sun, Stars and Nebulae; 3) Galaxies and Cosmology and 4) Archaeoastronomy and Astronomy in Culture. A number of excellent review talks were given on various related topics and many new outstanding results were presented during the Workshop, and many papers are useful for a number of astrophysical fields. A Preface, Organizers and Sponsors, the List of Participants, and Author Index are also given.

  7. Advanced Training Technologies and Learning Environments

    Science.gov (United States)

    Noor, Ahmed K. (Compiler); Malone, John B. (Compiler)

    1999-01-01

    This document contains the proceedings of the Workshop on Advanced Training Technologies and Learning Environments held at NASA Langley Research Center, Hampton, Virginia, March 9-10, 1999. The workshop was jointly sponsored by the University of Virginia's Center for Advanced Computational Technology and NASA. Workshop attendees were from NASA, other government agencies, industry, and universities. The objective of the workshop was to assess the status and effectiveness of different advanced training technologies and learning environments.

  8. NSFC VIP Attends the NSFC-JST Workshop

    Institute of Scientific and Technical Information of China (English)

    Zhang Yinglan

    2008-01-01

    @@ The NSFC-JST Workshop on Environment Conservation and Restoration Using Bioremediation Function/Technology was successfully held in Xi'an from June 24 to 25,2008.Prof.He Minghong,Vice President of NSFC,and Mr.Fumiaki Takahashi,Executive Director of JST,headed delegations respectively to attend the workshop and delivered speeches at the workshop.About 30 scientists from Japan and China as well as the representatives from both funding agencies joined the meeting.

  9. Report of a Workshop in Nuclear Forces and Nonproliferation held at the Woodrow Wilson International Center for Scholars, Washington, DC

    Energy Technology Data Exchange (ETDEWEB)

    Pilat, Joseph F [Los Alamos National Laboratory

    2009-01-01

    The workshop addressed evolving nuclear forces and their impacts on nonproliferation in the context of the new strategic environment, the Obama Administration's Nuclear Posture Review (NPR) Review and the 2010 Conference (RevCon) of the Parties to the Treaty on the Non-Proliferation of Nuclear Weapons (NPT). The issues discussed are at the heart of the debate on nuclear policy issues such asfuture nuclear weapons requirements and nonproliferation, but also the stockpile stewardship program and infrastructure modernization. The workshop discussions reflected the importance of the NPRfor defining the role of US nuclear forces in dealing with 21s1 century threats and providing guidance that will shape NNSA and DoD programs. They also highlighted its importancefor NPT diplomacy. The discussion noted the report of the bipartisan Congressional Commission on the Strategic Posture of the United States, and the expectation that the NPR would likely reflect its consensus to a large degree (although the Administration was not bound by the report). There was widespread support for developing thefoundationsfor a sustainable nuclear-weapon program that addresses nuclear weapons, infrastructure and expertise in the broader nonproliferation, disarmament and international security contexts. The discussion also revealed a convergence of views, but no consensus, on a number of important issues, including the diminished role but continued importance of nuclear weapons; the need to take action to ensure the sustainability of the stockpile, and the recapitalization of the infrastructure and expertise; and the need to take action to promote nonproliferation, arms control and disarmament objectives.

  10. IPHE Infrastructure Workshop Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    None

    2010-02-01

    This proceedings contains information from the IPHE Infrastructure Workshop, a two-day interactive workshop held on February 25-26, 2010, to explore the market implementation needs for hydrogen fueling station development.

  11. Proceedings of the workshop on molten salts technology and computer simulation

    Energy Technology Data Exchange (ETDEWEB)

    Hayashi, Hirokazu; Minato, Kazuo (eds.) [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2001-12-01

    Applications of molten salts technology to separation and synthesis of materials have been studied eagerly, which would develop new fields of materials science. Research Group for Actinides Science, Department of Materials Science, Japan Atomic Energy Research Institute (JAERI), together with Reprocessing and Recycle Technology Division, Atomic Energy Society of Japan, organized the Workshop on Molten Salts Technology and Computer Simulation at Tokai Research Establishment, JAERI on July 18, 2001. In the workshop eleven lectures were made and lively discussions were there on the fundamentals and applications of the molten salts technology that covered the structure and basic properties of molten salts, the pyrochemical reprocessing technology and the relevant computer simulation. The 10 of the presented papers are indexed individually. (J.P.N.)

  12. Fiscal 1998 engineer interexchange project (coal mine technology field). International interexchange project (Workshop in Japan); 1998 nendo gijutsusha koryu jigyo (tanko gijutsu bun'ya). Kokusai koryu jigyo (kokunai workshop)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report summarizes the workshop and technical tour held in Japan for technical interexchange of domestic and overseas engineers. From the information obtained, the higher productivity of coal mines is dependent on selective mining under blessed geological conditions, however, basically establishment of an advanced management technique for inexpensive stable operation. Both preliminary collection of geological information and introduction of advanced facilities even under unstable conditions are necessary. The balance and optimization of the whole system, and an excellent human nature for operation are also essential. Use of roof bolt supports is diffusing as improvement technology of excavation speed and roof control technology over the world. However, for introduction of new technologies, collection of test results and various kinds of training are necessary. Methane gas in coal seams as the main theme of the Hokkaido workshop is a precious unused natural resource, and important for prevention of global warming and coal mine protection measures. Its use is dependent on development of gas drainage technology. (NEDO)

  13. 77 FR 26509 - Notice of Public Meeting-Cloud Computing Forum & Workshop V

    Science.gov (United States)

    2012-05-04

    ... National Institute of Standards and Technology Notice of Public Meeting--Cloud Computing Forum & Workshop V... announces the Cloud Computing Forum & Workshop V to be held on Tuesday, Wednesday and Thursday, June 5, 6... provide information on the U.S. Government (USG) Cloud Computing Technology Roadmap initiative. This...

  14. Remote Sensing and the Kyoto Protocol: A Review of Available and Future Technology for Monitoring Treaty Compliance

    Science.gov (United States)

    Imhoff, Marc L.; Rosenquist, A.; Milne, A. K.; Dobson, M. C.; Qi, J.

    2000-01-01

    An International workshop was held to address how remote sensing technology could be used to support the environmental monitoring requirements of the Kyoto Protocol. An overview of the issues addressed and the findings of the workshop are discussed.

  15. SDIO Workshop on Piezoelectric Ceramic Actuators for Space Applications Held in Alexandria, Virginia on 25 February 1992

    Science.gov (United States)

    1992-06-01

    Advanced Piezoelectric Ceramic Actuator Materials for Space Applications Appendix D-- ACESA, ACTEX and AMASS PZT Material Needs Appendix E-- High Strain...with Embedded Sensors and Actuators ACTEX Advanced Control Technology Experiment Ag silver AMASS Advanced Materials Application to Space Structures...ACESA), Advanced Control Technology Experiment ( ACTEX ), and Advanced Materials Application to Space Structures (AMASS). The ACESA struts, 16 feet long

  16. Towards an adaptive management approach for the conservation of rare antelope in the Kruger National Park - outcome of a workshop held in May 2000

    Directory of Open Access Journals (Sweden)

    C.C. Grant

    2000-07-01

    Full Text Available A precipitous drop in rare antelope numbers specifically roan (Hippotragus equinis sable (Hippotragus niger and tsessebe (Damaliscus lunatus since 1986 has become one of the main concerns of management. The zebra (Equus burchelli population in the preferred habitats of these species had increased with the development of artificial waterpoints especially in the areas occupied by roan and tsessebe, and these events are hypothesised to be the main cause of the decline. Closure of artificial waterpoints resulted in moving the high-density, water-dependent zebra from the northern basalt plains, the preferred roan habitat. However, the expected responding increase in the rare antelope populations did not materialise. This lack of response over six years necessitated a critical re-evaluation of the management of rare antelope in the Kruger National Park. Subsequently, a workshop was held at Skukuza during May 2000. The options for adaptive management of the declining rare antelope populations, which was discussed at the workshop, is the subject of this manuscript. The participants felt that the removal/closure of artificial waterpoints was the most unintrusive management tool available to move high density grazers from the habitats preferred by rare antelope. Waterpoints to be closed should be carefully evaluated, and time allowed for rare antelope to respond to habitat changes. Boosting populations of roan and tsessebe by supplementing animals was seriously considered, with the proviso that it should be done under favourable circumstances. Small patch fires that could provide green grazing over extended periods were recommended. Predator control was discussed but could not obtain general support as a viable option in the Kruger National Park.

  17. Fundamentals of Tribology Workshop Held at the University of Florida, Gainesville, Florida on 10-11 May 2010: Project Summary

    Science.gov (United States)

    2010-05-01

    Emerging characterization tools entailing elements of both microscopy and spectroscopy (nanoIR, X-ray microtomography, MALDI TOF -MS, TOF -SIMS...environmental benefits. Impacted technologies: - power generation - space applications - car engines (lightweight materials, higher temps) - rail

  18. Proceedings of the 2nd Workshop on Awareness and Reflection in Technology-Enhanced Learning

    OpenAIRE

    Moore, Adam; Pammer, Viktoria; Pannese, Lucia; Prilla, Michael; Rajagopal, Kamakshi; Reinhardt, Wolfgang; Ullman, Thomas; Voigt, Christian

    2013-01-01

    Moore, A., Pammer, V., Pannese, L., Prilla, M., Rajagopal, K., Reinhardt, W., Ullman, Th. D., & Voigt, Ch. (Eds.) (2012). Proceedings of the 2nd Workshop on Awareness and Reflection in Technology Enhanced Learning. In conjunction with the 7th European Conference on Technology Enhanced Learning: 21st Century Learning for 21st Century Skills (ARTEL/EC-TEL 2012). September, 18, 2012, Saarbrücken, Germany. Available online at http://ceur-ws.org/Vol-931/.

  19. Workshop on compact storage ring technology: applications to lithography

    Energy Technology Data Exchange (ETDEWEB)

    1986-05-30

    Project planning in the area of x-ray lithography is discussed. Three technologies that are emphasized are the light source, the lithographic technology, and masking technology. The needs of the semiconductor industry in the lithography area during the next decade are discussed, particularly as regards large scale production of high density dynamic random access memory devices. Storage ring parameters and an overall exposure tool for x-ray lithography are addressed. Competition in this area of technology from Germany and Japan is discussed briefly. The design of a storage ring is considered, including lattice design, magnets, and beam injection systems. (LEW)

  20. Communications and technology for violence prevention: workshop summary

    National Research Council Canada - National Science Library

    Blakeslee, Katherine M; Patel, Deepali; Simon, Melissa A

    2012-01-01

    .... At the same time, new communications technologies and distribution channels have altered traditional means of communications, and have made community-based efforts to prevent violence possible...

  1. The effectiveness of Family Science and Technology Workshops on parental involvement, student achievement, and student curiosity

    Science.gov (United States)

    Kosten, Lora Bechard

    The literature suggests that parental involvement in schools results in positive changes in students and that schools need to provide opportunities for parents to share in the learning process. Workshops are an effective method of engaging parents in the education of their children. This dissertation studies the effects of voluntary Family Science and Technology Workshops on elementary children's science interest and achievement, as well as on parents' collaboration in their child's education. The study involved 35 second and third-grade students and their parents who volunteered to participate. The parental volunteers were randomly assigned to either the control group (children attending the workshops without a parent) or the treatment group (children attending the workshops with a parent). The study was conducted in the Fall of 1995 over a four-week period. The Analysis of Variance (ANOVA) and Kruskal-Wallis tests were used to determine the effects of the workshops on children's science achievement and science curiosity, as well as on parents' involvement with their child's education. The study revealed that there was no significant statistical difference at the.05 level between the treatment/control groups in children's science achievement or science curiosity, or in parent's involvement with their children's education. However, the study did focus parental attention on effective education and points the way to more extensive research in this critical learning area. This dual study, that is, the effects of teaching basic technology to young students with the support of their parents, reflects the focus of the Salve Regina University Ph.D. program in which technology is examined in its effects on humans. In essence, this program investigates what it means to be human in an age of advanced technology.

  2. 78 FR 16675 - First Technology Transitions; Policy Task Force Workshop

    Science.gov (United States)

    2013-03-18

    ... technological capabilities of wireless and wireline (copper, fiber and coax) technologies today and in the...-division multiplexing (TDM) to Internet Protocol (IP); from copper to fiber; from only wireline services to greater use of wireless and their implications for modernizing Commission policy. DATES: The...

  3. Presentations and recorded keynotes of the First European Workshop on Latent Semantic Analysis in Technology Enhanced Learning

    NARCIS (Netherlands)

    Several

    2007-01-01

    Presentations and recorded keynotes at the 1st European Workshop on Latent Semantic Analysis in Technology-Enhanced Learning, March, 29-30, 2007. Heerlen, The Netherlands: The Open University of the Netherlands. Please see the conference website for more information: http://homer.ou.nl/lsa-workshop0

  4. Presentations and recorded keynotes of the First European Workshop on Latent Semantic Analysis in Technology Enhanced Learning

    NARCIS (Netherlands)

    Several

    2007-01-01

    Presentations and recorded keynotes at the 1st European Workshop on Latent Semantic Analysis in Technology-Enhanced Learning, March, 29-30, 2007. Heerlen, The Netherlands: The Open University of the Netherlands. Please see the conference website for more information: http://homer.ou.nl/lsa-workshop0

  5. IEEE Solid-State Sensors Workshop Held in Hilton Head Island, South Carolina, on 2-5 June 1986

    Science.gov (United States)

    1987-06-01

    systems tnder NnormalV physiological condi- minimally disturbed which implies that the diffusion tions. Two sensor technologies which take particular...Thomas, CA, Springer,PA, LoebGE, Berwald- Netter ,Y, Okun,LM. A miniature microelectrode The study of the electrical activity of brain and array to... physiological solution at room tempera- ture. Physiological solution simulates blood in its Cl -concentration and pH (7.4). Every hour the solutionA sensor

  6. Proceedings: Annual Workshop on Meteorological and Environmental Inputs to Aviation Systems (5th) Held on 31 March-2 April 1981.

    Science.gov (United States)

    1981-12-01

    of training people. Such a meeting of the effects of airframe and nacelle (or pro- would allow us to discuss available technology peller) icing upon...Doppler radar in thunderstorm detection airframe and nacelle icinq upon the aero- and lightning forecasting. dyrjmic coefficients and engine parameters...head- Global wind sensing from satellites using laser on and should be by an interagency effort in radar ( lidar ) is feasible. The Wave Propagation

  7. Proceedings of the 1996 Space Surveillance Workshop Held in Lexington, Massachusetts on 2-4 April 1996. Volume 1,

    Science.gov (United States)

    2007-11-02

    Optical Aperture Synthesis 177 Sergio R. Restaino, R.A. Carreras and G.C. Loos - USAF Phillips Laboratory R.J. McBroom, J.T. Baker and D.A. Nahrstedt... planes , optics, and processors. In the process of meeting the BMDO objectives MSX will also contribute significantly to the understanding of...based space surveillance functions and technology. SBV incorporates a charged^oupled device focal plane a 15^m aperture telescope, a signal processor

  8. Proceedings of the First Workshop on Nondestructive Evaluation (NDE) of Titanium Alloys held 9-10 December 1980, Orlando, Florida,

    Science.gov (United States)

    1982-06-01

    International Science Center Thousand Oaks, California 91360 The Science Center has maintained a group of experts in titanium metalurgy for more than 10...be interro- gated for mechanical properties (hardness, strength, toughness) and physical properties (acous- tic modulus, damping, electrical...34Progress in Metal Physics ," Vol. VII, Pergamon Press, London, 1958, p. 65. 2. J. C. Williams in "Titanium Science and Technology," Vol. 3, R. I

  9. SERC School on Computational Statistical Physics held at the Indian Institute of Technology

    CERN Document Server

    Ray, Purusattam

    2011-01-01

    The present book is an outcome of the SERC school on Computational Statistical Physics held at the Indian Institute of Technology, Guwahati, in December 2008. Numerical experimentation has played an extremely important role in statistical physics in recent years. Lectures given at the School covered a large number of topics of current and continuing interest. Based on lectures by active researchers in the field- Bikas Chakrabarti, S Chaplot, Deepak Dhar, Sanjay Kumar, Prabal Maiti, Sanjay Puri, Purusattam Ray, Sitangshu Santra and Subir Sarkar- the nine chapters comprising the book deal with topics that range from the fundamentals of the field, to problems and questions that are at the very forefront of current research. This book aims to expose the graduate student to the basic as well as advanced techniques in computational statistical physics. Following a general introduction to statistical mechanics and critical phenomena, the various chapters cover Monte Carlo and molecular dynamics simulation methodolog...

  10. Workshop on power conditioning for alternative energy technologies. Executive summary

    Energy Technology Data Exchange (ETDEWEB)

    Smith, D. R.

    1979-01-01

    As various alternative energy technologies such as photovoltaics, wind, fuel cells, and batteries are emerging as potential sources of energy for the future, the need arises for development of suitable power-conditioning systems to interface these sources to their respective loads. Since most of these sources produce dc electricity and most electrical loads require ac, an important component of the required power-conditioning units is a dc-to-ac inverter. The discussions deal with the development of power conditioners for each alternative energy technology. Discussion topics include assessments of current technology, identification of operational requirements with a comparison of requirements for each source technology, the identification of future technology trends, the determination of mass production and marketing requirements, and recommendations for program direction. Specifically, one working group dealt with source technology: photovoltaics, fuel cells and batteries, and wind followed by sessions discussing system size and application: large grid-connected systems, small grid-connected systems, and stand alone and dc applications. A combined group session provided an opportunity to discuss problems common to power conditioning development.

  11. Electroslag Processing for Marine Application. Summary Report on a Workshop Held in Annapolis, Maryland on 5-6 March 1985.

    Science.gov (United States)

    1985-03-01

    Molybdenum 0.96 1.01 1.00 1.01 1.01 Vanadium 0.21 0.20 0.20 0.20 0.20 Niobium 0.054 0.051 0.052 0.050 0.047 Titanium 0.002 0.001 0.002 0.001 0.002 Cobalt...toughness reduction; b) Grain size reduction by microalloying the steel with aluminum nitrides or boron ; c) Macroalloying the steel with the elements...processing technology. Microalloyed steels continue to be developed with superior heat affected zone toughness at high heat inputs. Parallel developments

  12. The First Eighteen Years of Reverse Monte Carlo Modelling, a workshop held in Budapest, Hungary (28-30th September 2006).

    Science.gov (United States)

    Keen, David A; Pusztai, László

    2007-08-22

    This Special Issue contains a collection of papers reflecting the content of the third workshop on reverse Monte Carlo (RMC) methods, held in a hotel on hills overlooking Budapest at the end of September 2006. Over forty participants gathered to hear talks and discuss a broad range of science based on the RMC technique in very convivial surroundings. Reverse Monte Carlo modelling is a method for producing three-dimensional disordered structural models in quantitative agreement with experimental data. The method was developed in the late 1980s and has since achieved wide acceptance within the scientific community [1]. It is particularly suitable for studies of the structures of liquid and amorphous materials, although it may also be applied effectively to the structural analysis of disordered crystalline systems. Since the previous RMC workshop in 2003 [2] there have been several developments in the technique, particularly as applied to crystals, and in the range of its application, most noticeable being the routine modelling of multiple data sets for a given problem; the latter growing through the increasing quality and availability of x-ray total scattering data from synchrotron x-ray sources. The RMC workshop was particularly beneficial, providing a forum for those workers in the field to take stock of past achievements and to look forward to future developments. It is our hope that the collection of papers within this Special Issue will also communicate this to the wider scientific community, providing a balance between papers that have more of an introductory review flavour and those that concentrate on current state of the art research opportunities using the RMC method. Furthermore, by including a small number of papers from colleagues working on similar disordered problems with complementary analysis techniques, we hope that the RMC method may be placed in a broader scientific context. The papers within this special issue have been arranged into four groups

  13. 2nd International Workshop on Learning Technology for Education in Cloud

    CERN Document Server

    Tao, Yu-Hui; Yang, Hsin-Chang; Ting, I-Hsien

    2014-01-01

    Proceedings from the 2013 LTEC conference in Kaohsiung,Taiwan. The papers examine diverse aspects of Learning Technology for Education in Cloud environments, including social, technical and infrastructure implications. Also addressed is the question of how cloud computing can be used to design applications to support real time on demand learning using technologies. The workshop proceedings provide opportunities for delegates to discuss the latest research in TEL (Technology Enhanced Learning) and its impacts for learners and institutions, using cloud technolgies.

  14. 6th International Microbeam Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Dr Kevin M. Prise

    2004-01-01

    The extended abstracts which are submitted here present a summary of the proceedings of the 6th International Workshop/12th LH Gray Workshop: Microbeam Probes of Cellular Radiation Response, held at St. Catherine's College, University of Oxford, UK on March, 29th-31st, 2003. In 1993 the 4th LH Gray Workshop entitled ''Microbeam Probes of Cellular Radiation Response'' was held at the Gray Cancer Institute in Northwood. This was organized by Prof BD Michael, Dr M. Folkard and Dr KM Prise and brought together 40 participants interested in developing and applying new microbeam technology to problems in radiation biology (1). The workshop was an undoubted success and has spawned a series of subsequent workshops every two years. In the past, these workshops have been highly successful in bringing together groups interested in developing and applying micro-irradiation techniques to the study of cell and tissue damage by ionizing radiations. Following the first microbeam workshop, there has been a rapid growth in the number of centres developing radiobiology microbeams, or planning to do so and there are currently 15-20 worldwide. Much of the recent research using microbeams has used them to study low-dose effects and ''non-targeted'' responses such bystander effects, genomic instability and adaptive responses. The goal of the 6th workshop was to build on our knowledge of the development of microbeam approaches and the application to radiation biology in the future with the meeting stretching over a 3 day period. Over 80 participants reviewed the current state of radiobiology microbeam research worldwide and reported on new technological developments both in the fields of physics and biology.

  15. Mathematical Modeling: An Integrated Algebra, Physics and Chemistry Workshop for Teachers as a Tool for Recruiting Science, Technology and Mathematics Students.

    Science.gov (United States)

    Obot, V.; Reiff, P.; Morris, P. A.; Humphrey, M.

    2004-12-01

    Based on the philosophy that there exists an artificial boundary between mathematics and the sciences, we have developed a series of workshops and modules on mathematical modeling suitable as teaching examples in secondary schools. The workshops is a 60-hour workshop held on the campus of Texas Southern University during the summer months, followed by a series of follow-up workshops on Saturdays during the academic year. Texas Southern University is a Historically Black University devoted to urban programming. The workshops use experimental and observational data from various fields with particular emphasis on chemistry, physics, earth and space sciences. The data is used to construct mathematical models. In the process of constructing the model, the student learns the appropriate mathematical and scientific concepts. We have studied linear, exponential and logarithmic functions, and using planetary data, derived and discussed Kepler's laws. We have learned how to balance chemical equations as a solution to a system of equations. We have studied and modeled electromagnetic waves using ham radio as our launching pad. Judging from participant evaluations, follow up workshops and classroom visits; teachers who participated in this workshop have been re-invigorated in their teaching. They have incorporated our examples in their teaching. They have reported increased attentiveness and excitement regarding science and mathematics from their students. It appears that this approach have caused some students to think seriously about pursuing science and engineering careers. An added benefit of this program is that the teachers have invited us and affiliated scientist into their classrooms for demonstrations. This gives the students an opportunity to interact with actual scientist and engineers. These interactions have resulted in several of the students being invited to serve as summer interns in our laboratories. For the past three years, almost all of the interns have

  16. 75 FR 8099 - Public Workshop on Marine Technology and Standards

    Science.gov (United States)

    2010-02-23

    ... Composite Pressure Vessels Coating Selection Risk/Hazard Mitigation Transporting CNG as Cargo Shipboard Fire..., electrical & mechanical systems, lifesaving and fire safety equipment, and related equipment approval and..., including: Green Ship Technology Hydrogen Fuel Cell Propulsion Standards for H 2 Storage and...

  17. Reactive multiphase flow simulation workshop summary

    Energy Technology Data Exchange (ETDEWEB)

    VanderHeyden, W.B.

    1995-09-01

    A workshop on computer simulation of reactive multiphase flow was held on May 18 and 19, 1995 in the Computational Testbed for Industry at Los Alamos National Laboratory (LANL), Los Alamos, New Mexico. Approximately 35 to 40 people attended the workshop. This included 21 participants from 12 companies representing the petroleum, chemical, environmental and consumer products industries, two representatives from the DOE Office of Industrial Technologies and several from Los Alamos. The dialog at the meeting suggested that reactive multiphase flow simulation represents an excellent candidate for government/industry/academia collaborative research. A white paper on a potential consortium for reactive multiphase flow with input from workshop participants will be issued separately.

  18. 2nd International Workshop on Evidence-Based Technology Enhanced Learning

    CERN Document Server

    Gennari, Rosella; Marenzi, Ivana; Mascio, Tania; Prieta, Fernando

    2013-01-01

    Research on Technology Enhanced Learning (TEL) investigates how information and communication technologies can be designed in order to support pedagogical activities. The Evidence Based Design (EBD) of a system bases its decisions on empirical evidence and effectiveness. The evidence-based TEL workshop (ebTEL) brings together TEL and EBD.   The first edition of ebTEL collected contributions in the area of TEL from computer science, artificial intelligence, evidence-based medicine, educational psychology and pedagogy. Like the previous edition, this second edition, ebTEL’13, wants to be a forum in which TEL researchers and practitioners alike can discuss innovative evidence-based ideas, projects, and lessons related to TEL.   The workshop took place in Salamanca, Spain, on May 22nd-24th 2013.  

  19. Direct and Large-Eddy Simulation VII Proceedings of the Seventh International ERCOFTAC Workshop on Direct and Large-Eddy Simulation, held at the University of Trieste, September 8-10, 2008

    CERN Document Server

    Armenio, Vincenzo; Fröhlich, Jochen

    2010-01-01

    The seventh ERCOFTAC Workshop on "Direct and Large-Eddy Simulation" (DLES-7) was held at the University of Treste from September 8-10, 2008. Following the tradition of previous workshops in the DLES-series this edition reflects the state of the art of numerical simulation of traditional and turbulent flows and provided an active forum for discussion of recent developments in simulation techniques and understanding of flow physics. At a fundamental level this workshop addressed numerous theoretical and physical aspects of transitional and turbulent flows. At an applied level it contributes to the solution of problems related to energy production, transportation and the environment. This book is of interest to scientists and engineers both at an early level in their career as well as at more senior levels.

  20. Advanced Wind Turbine Drivetrain Concepts. Workshop Report

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2010-12-01

    This report presents key findings from the Department of Energy’s Advanced Drivetrain Workshop, held on June 29-30, 2010, to assess different advanced drivetrain technologies, their relative potential to improve the state-of-the-art in wind turbine drivetrains, and the scope of research and development needed for their commercialization in wind turbine applications.

  1. FY 2000 international exchange project on exchanges of engineers - Coal mine technology field. Workshop in Japan; 2000 nendo gijutsusha koryu jigyo (tanko gijutsu bun'ya). Kokusai koryu jigyo (kokunai workshop)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the purpose of surveying a possibility of transfer of Japanese technology and strengthening the engineer sending project and engineer receiving/training project, Asia/Pacific Coal Workshop was held in Tokyo on November 29 and 30, 2000. On the 1st day, 9 persons including 5 from overseas and 4 from Japan gave lectures on coal production technology. On the 2nd day, after the session on safety, a panel discussion titled 'How to handle global environmental problems' was made. The lectures given were 'Development of coal resource and technical innovation,' and 'Heightening of production technology and utilization of unused resource.' The titles of the engineers invited from overseas were as follows: Trend of resource assessment/exploration technology in Australia and the subjects; Trend of resource assessment/exploration technology in Russia and the subjects; Auger coal mining - new coal mining system and possibility in the U.S. market; Successful restructure in the coal industry of Germany by technology improvement in long-wall mining/transportation/infrastructure; Present situation and future outlook of Indonesian low-ash/low-sulfur coal. (NEDO)

  2. Record of the facility deactivation, decommissioning, and material disposition (D and D) workshop: A new focus for technology development, opportunities for industry/government collaboration

    Energy Technology Data Exchange (ETDEWEB)

    Bedick, R.C.; Bossart, S.J.; Hart, P.W.

    1995-07-01

    This workshop was held at the Morgantown Energy Technology Center (METC) in Morgantown, West Virginia, on July 11--12, 1995. The workshop sought to establish a foundation for continued dialogue between industry and the DOE to ensure that industry`s experiences, lessons learned, and recommendations are incorporated into D and D program policy, strategy, and plans. The mission of the D and D Focus Area is to develop improved technologies, processes and products, to characterize, deactivate, survey, maintain, decontaminate, dismantle, and dispose of DOE surplus structures, buildings, and contents. The target is a five-to-one return on investment through cost avoidance. The cornerstone of the D and D focus area activities is large-scale demonstration projects that actually decontaminate, decommission, and dispose of a building. The aim is to demonstrate innovative D and D technologies as part of an ongoing DOE D and D project. OTD would pay the incremental cost of demonstrating the innovative technologies. The goal is to have the first demonstration project completed within the next 2 years. The intent is to select projects, or a project, with visible impact so all of the stakeholders know that a building was removed, and demonstrate at a scale that is convincing to the customers in the EM program so they feel comfortable using it in subsequent D and D projects. The plan is to use a D and D integrating contractor who can then use the expertise in this project to use in jobs at other DOE sites.

  3. Workshop and conference on Grand Challenges applications and software technology

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-31

    On May 4--7, 1993, nine federal agencies sponsored a four-day meeting on Grand Challenge applications and software technology. The objective was to bring High-Performance Computing and Communications (HPCC) Grand Challenge applications research groups supported under the federal HPCC program together with HPCC software technologists to: discuss multidisciplinary computational science research issues and approaches, identify major technology challenges facing users and providers, and refine software technology requirements for Grand Challenge applications research. The first day and a half focused on applications. Presentations were given by speakers from universities, national laboratories, and government agencies actively involved in Grand Challenge research. Five areas of research were covered: environmental and earth sciences; computational physics; computational biology, chemistry, and materials sciences; computational fluid and plasma dynamics; and applications of artificial intelligence. The next day and a half was spent in working groups in which the applications researchers were joined by software technologists. Nine breakout sessions took place: I/0, Data, and File Systems; Parallel Programming Paradigms; Performance Characterization and Evaluation of Massively Parallel Processing Applications; Program Development Tools; Building Multidisciplinary Applications; Algorithm and Libraries I; Algorithms and Libraries II; Graphics and Visualization; and National HPCC Infrastructure.

  4. Dogs That Haven't Barked: Towards an Understanding of the Absence of Expected Technological Threats Workshop Bibliography

    Energy Technology Data Exchange (ETDEWEB)

    Roseman, Mallory [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Zikry, Fareeda [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-12-13

    Lawrence Livermore National Laboratory’s Center for Global Security Research hosted a workshop to investigate why some consistently predicted threats from science and technology (S&T) have not manifested with the impacts to international security as forecasted. During the workshop, “Dogs That Haven’t Barked: Towards an Understanding of the Absence of Expected Technological Threats,” participants used two specific cases to focus the discussion: biotechnology and man-portable air defense systems (MANPADS).

  5. DTU Climate Change Technologies

    DEFF Research Database (Denmark)

    During 2008 and 2009, DTU held a workshop series focusing on assessment of and adaption to climate changes as well as on mitigation of green house gasses. In the workshops, a total of 1500 scientists, government officials and business leaders have outlined scenarios for technology development...

  6. Nanoscience Research for Energy Needs. Report of the National Nanotechnology Initiative Grand Challenge Workshop, March 16-18, 2004

    Energy Technology Data Exchange (ETDEWEB)

    Alivisatos, P.; Cummings, P.; De Yoreo, J.; Fichthorn, K.; Gates, B.; Hwang, R.; Lowndes, D.; Majumdar, A.; Makowski, L.; Michalske, T.; Misewich, J.; Murray, C.; Sibener, S.; Teague, C.; Williams, E.

    2004-03-18

    This document is the report of a workshop held under NSET auspices in March 2004 aimed at identifying and articulating the relationship of nanoscale science and technology to the Nation's energy future.

  7. ICP-MS Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Carman, April J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Eiden, Gregory C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2014-11-01

    This is a short document that explains the materials that will be transmitted to LLNL and DNN HQ regarding the ICP-MS Workshop held at PNNL June 17-19th. The goal of the information is to pass on to LLNL information regarding the planning and preparations for the Workshop at PNNL in preparation of the SIMS workshop at LLNL.

  8. 75 FR 53277 - Notice of Workshop on Polymers for Photovoltaic Systems

    Science.gov (United States)

    2010-08-31

    ... National Institute of Standards and Technology Notice of Workshop on Polymers for Photovoltaic Systems... Photovoltaic Systems. DATES: The workshop will be held over two days, Thursday, September 23, 8:30 a.m. to 5 p... polymeric materials used in photovoltaic systems; testing, performance, and reliability of polymers...

  9. H2@Scale Workshop Report

    Energy Technology Data Exchange (ETDEWEB)

    Pivovar, Bryan

    2017-03-31

    Final report from the H2@Scale Workshop held November 16-17, 2016, at the National Renewable Energy Laboratory in Golden, Colorado. The U.S. Department of Energy's National Renewable Energy Laboratory hosted a technology workshop to identify the current barriers and research needs of the H2@Scale concept. H2@Scale is a concept regarding the potential for wide-scale impact of hydrogen produced from diverse domestic resources to enhance U.S. energy security and enable growth of innovative technologies and domestic industries. Feedback received from a diverse set of stakeholders at the workshop will guide the development of an H2@Scale roadmap for research, development, and early stage demonstration activities that can enable hydrogen as an energy carrier at a national scale.

  10. Proceedings of a workshop, held in Constanta, Romania on 22 May 2014, on Oral Health of Children in the Central and Eastern European Countries in the context of the current economic crisis.

    Science.gov (United States)

    Hysi, Dorjan; Eaton, Kenneth A; Tsakos, George; Vassallo, Paula; Amariei, Corneliu

    2016-07-25

    This report presents the proceedings of a workshop held in Constanta, Romania on 22 May 2014. During the workshop, representatives from 18 Central and Eastern European countries gave oral presentations on the current oral health of children and young adults aged 16 years and younger. The aim of the workshop was to collect and present data relating to the oral health of children from Central and Eastern European countries and to discuss them in the context of the political changes that have taken place over the last two decades and the recent economic crisis.The presenters had previously completed a series of questions on oral epidemiological studies, prevention of oral disease, treatment and payment, dental personnel, uptake of oral health care and other considerations and structured their presentations on these topics plus the influence of the economic crisis on oral health. It should be remembered that this paper is a report of the proceedings of a workshop and not a study. Ethics approval is not required for workshops.After the 18 oral presentations a 90 min discussion took place during which further points were raised. The presentations, the discussion and the conclusions which were reached are reported in this manuscript.

  11. Eliciting Public Attitudes Regarding Bioremediation Cleanup Technologies: Lessons Learned from a Consensus Workshop in Idaho

    Energy Technology Data Exchange (ETDEWEB)

    Denise Lach, Principle Investigator; Stephanie Sanford, Co-P.I.

    2003-03-01

    During the summer of 2002, we developed and implemented a ''consensus workshop'' with Idaho citizens to elicit their concerns and issues regarding the use of bioremediation as a cleanup technology for radioactive nuclides and heavy metals at Department of Energy (DOE) sites. The consensus workshop is a derivation of a technology assessment method designed to ensure dialogue between experts and lay people. It has its origins in the United States in the form of ''consensus development conferences'' used by the National Institutes of Health (NIH) to elicit professional knowledge and concerns about new medical treatments. Over the last 25 years, NIH has conducted over 100 consensus development conferences. (Jorgensen 1995). The consensus conference is grounded in the idea that technology assessment and policy needs to be socially negotiated among many different stakeholders and groups rather than narrowly defined by a group of experts. To successfully implement new technology, the public requires access to information that addresses a full complement of issues including understanding the organization proposing the technology. The consensus conference method creates an informed dialogue, making technology understandable to the general public and sets it within perspectives and priorities that may differ radically from those of the expert community. While specific outcomes differ depending on the overall context of a conference, one expected outcome is that citizen panel members develop greater knowledge of the technology during the conference process and, sometimes, the entire panel experiences a change in attitude toward the technology and/or the organization proposing its use (Kluver 1995). The purpose of this research project was to explore the efficacy of the consensus conference model as a way to elicit the input of the general public about bioremediation of radionuclides and heavy metals at Department of Energy sites

  12. Workshop tools and methodologies for evaluation of energy chains and for technology perspective

    Energy Technology Data Exchange (ETDEWEB)

    Appert, O. [Institut Francais du Petrole (IFP), 92 - Rueil-Malmaison (France); Maillard, D. [Energy and Raw Materials, 75 - Paris (France); Pumphrey, D. [Energy Cooperation, US Dept. of Energy (United States); Sverdrup, G.; Valdez, B. [National Renewable Energy Laboratory, Golden, CO (United States); Schindler, J. [LB-Systemtechnik (LBST), GmbH, Ottobrunn (Germany); His, St.; Rozakis, St. [Centre International de Recherche sur Environnement Developpement (CIRED), 94 - Nogent sur Marne (France); Sagisaka, M. [LCA Research Centre (Japan); Bjornstad, D. [Oak Ridge National Laboratory, Oak Ridge, Tennessee (United States); Madre, J.L. [Institut National de Recherche sur les Transports et leur Securite, 94 - Arcueil (France); Hourcade, J.Ch. [Centre International de Recherche sur l' Environnement le Developpement (CIRED), 94 - Nogent sur Marne (France); Ricci, A.; Criqui, P.; Chateau, B.; Bunger, U.; Jeeninga, H. [EU/DG-R (Italy); Chan, A. [National Research Council (Canada); Gielen, D. [IEA-International Energy Associates Ltd., Fairfax, VA (United States); Tosato, G.C. [Energy Technology Systems Analysis Programme (ETSAP), 75 - Paris (France); Akai, M. [Agency of Industrial Science and technology (Japan); Ziesing, H.J. [Deutsches Institut fur Wirtschaftsforschung, DIW Berlin (Germany); Leban, R. [Conservatoire National des Arts et Metiers (CNAM), 75 - Paris (France)

    2005-07-01

    The aims of this workshop is to better characterize the future in integrating all the dynamic interaction between the economy, the environment and the society. It offers presentations on the Hydrogen chains evaluation, the micro-economic modelling for evaluation of bio-fuel options, life cycle assessment evolution and potentialities, the consumer valuation of energy technologies attributes, the perspectives for evaluation of changing behavior, the incentive systems and barriers to social acceptability, the internalization of external costs, the endogenous technical change in long-tem energy models, ETSAP/technology dynamics in partial equilibrium energy models, very long-term energy environment modelling, ultra long-term energy technology perspectives, the socio-economic toolbox of the EU hydrogen road-map, the combined approach using technology oriented optimization and evaluation of impacts of individual policy measures and the application of a suite of basic research portfolio management tools. (A.L.B.)

  13. WORKSHOP FOR SUPERVISING TEACHERS IN AGRICULTURAL OCCUPATIONS FROM ELEVEN WESTERN STATES HELD AT COLORADO STATE UNIVERSITY AUGUST 1-5, 1966, SUMMARY REPORT.

    Science.gov (United States)

    JULSON, EARL E.

    A WORKSHOP FOR SUPERVISING-TEACHERS WAS ORGANIZED TO PLAN, EXPLORE, AND INNOVATE A MORE COMPLETE PROGRAM IN AGRICULTURAL EDUCATION. THE WORKSHOP ALSO INCLUDED DISCUSSION OF ESSENTIAL PHASES OF THE OFF-FARM AGRICULTURAL OCCUPATIONS AS THEY APPLY TO THE PREPARATION OF STUDENT TEACHERS. THIS REPORT INCLUDED (1) A LIST OF PARTICIPANTS FROM 11 WESTERN…

  14. Virtual Workshop

    DEFF Research Database (Denmark)

    Buus, Lillian; Bygholm, Ann

    In relation to the Tutor course in the Mediterranean Virtual University (MVU) project, a virtual workshop “Getting experiences with different synchronous communication media, collaboration, and group work” was held with all partner institutions in January 2006. More than 25 key-tutors within MVU...... participated from different institutions in the workshop. The result of the workshop was experiences with different communication tools and media. Facing the difficulties and possibilities in collaborateting virtually concerned around group work and development of a shared presentation. All based on getting...... experiences for the learning design of MVU courses. The workshop intented to give the participants the possibility to draw their own experiences with issues on computer supported collaboration, group work in a virtual environment, synchronous and asynchronous communication media, and different perspectives...

  15. Workshop Proceedings

    DEFF Research Database (Denmark)

    2012-01-01

    , the main focus there is on spoken languages in their written and spoken forms. This series of workshops, however, offers a forum for researchers focussing on sign languages. For the third time, the workshop had sign language corpora as its main topic. This time, the focus was on the interaction between......This collection of papers stems from the Fifth Workshop on the Representation and Processing of Sign Languages, held in May 2012 as a satellite to the Language Resources and Evaluation Conference in Istanbul. While there has been occasional attention for sign languages at the main LREC conference...... corpus and lexicon. More than half of the papers presented contribute to this topic. Once again, the papers at this workshop clearly identify the potentials of even closer cooperation between sign linguists and sign language engineers, and we think it is events like this that contribute a lot to a better...

  16. Workshop on Research for Space Exploration: Physical Sciences and Process Technology

    Science.gov (United States)

    Singh, Bhim S.

    1998-01-01

    This report summarizes the results of a workshop sponsored by the Microgravity Research Division of NASA to define contributions the microgravity research community can provide to advance the human exploration of space. Invited speakers and attendees participated in an exchange of ideas to identify issues of interest in physical sciences and process technologies. This workshop was part of a continuing effort to broaden the contribution of the microgravity research community toward achieving the goals of the space agency in human exploration, as identified in the NASA Human Exploration and Development of Space (HEDS) strategic plan. The Microgravity program is one of NASA'a major links to academic and industrial basic research in the physical and engineering sciences. At present, it supports close to 400 principal investigators, who represent many of the nation's leading researchers in the physical and engineering sciences and biotechnology. The intent of the workshop provided a dialogue between NASA and this large, influential research community, mission planners and industry technical experts with the goal of defining enabling research for the Human Exploration and Development of Space activities to which the microgravity research community can contribute.

  17. Workshop Report on Space Weather Risks and Society

    Science.gov (United States)

    Langhoff, Stephanie R.; Straume, Tore

    2012-01-01

    As technological innovations produce new capabilities, complexities, and interdependencies, our susceptibility to the societal impacts of space weather increase. There is real concern in the scientific community that our infrastructure would be at significant risk if a major geomagnetic storm should occur. To discuss the societal impacts of space weather, we brought together an interdisciplinary group of subject matter experts and societal stakeholders to participate in a workshop entitled Space Weather Risks and Society. The workshop was held at Ames Research Center (ARC) on 15-16 October 2011. The workshop was co-sponsored by NASA Ames Research Center (ARC), the Lockheed Martin Advanced Technology Center (LMATC), the Space Weather Prediction Center (SWPC, part of the National Oceanic and Atmospheric Administration NOAA), and the Rutherford Appleton Laboratory (RAL, part of the UK Science and Technology Facilities Council STFC). The workshop is part of a series of informal weekend workshops hosted by Center Director Pete Worden.

  18. Health technology assessment as comprehensive multidisciplinary evaluation of integrated care—focusing integrated home care as prototype. Workshop

    OpenAIRE

    Torben Larsen; Silvina Santana

    2010-01-01

    I. The workshop begins with an introduction by T. Larsen of key concepts and basic typology of health technology assessment (HTA), which will be illustrated by analytical elements from integrated home care. II. Questions for debate as presented and moderated by the workshop chair [Silvina Santana, University of Aveiro, Portugal] shall focus: 1) In which cases are HTA relevant? It is suggested that HTA is relevant in early stages of new interventions with genuine insecurity about the effects a...

  19. Solar workshops financial incentives

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-01-01

    Ten one-day workshops were held across the United States. Information in this workbook is compiled in conjunction with those workshops. The following discussions are included: solar as a fuel (history); why alternative fuels are being sought today; the need for conservation; advantages of solar energy; the potential of solar energy; why solar energy is not more widely used; a definition of solar; how solar can help meet energy demands; Federal policies and programs; what solar technologies exist today that can be effectively utilized (thermal applications, fuels from biomass, solar electric). Additional information is presented in three attachments: Energy-Conserving Methods; Domestic Policy Review of Solar Energy; and DOE Secretary's Annual Report to Congress-Solar Section. (MCW)

  20. Second NASA Workshop on Wiring for Space Applications

    Science.gov (United States)

    1994-01-01

    This document contains the proceedings of the Second NASA Workshop on Wiring for Space Applications held at NASA LeRC in Cleveland, OH, 6-7 Oct. 1993. The workshop was sponsored by NASA Headquarters Code QW Office of Safety and Mission Quality, Technical Standards Division and hosted by NASA LeRC, Power Technology Division, Electrical Components and Systems Branch. The workshop addressed key technology issues in the field of electrical power wiring for space applications. Speakers from government, industry, and academia presented and discussed topics on arc tracking phenomena, wiring system design, insulation constructions, and system protection. Presentation materials provided by the various speakers are included in this document.

  1. Modern Technologies for Landslide Monitoring and Prediction

    National Research Council Canada - National Science Library

    Scaioni, Marco

    2015-01-01

    Modern Technologies for Landslide Investigation and Prediction presents eleven contributed chapters from Chinese and Italian authors, as a follow-up of a bilateral workshop held in Shanghai on September 2013...

  2. First International Workshop on Grid Simulator Testing of Wind Turbine Drivetrains: Workshop Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Gevorgian, V.; Link, H.; McDade, M.; Mander, A.; Fox, J. C.; Rigas, N.

    2013-11-01

    This report summarizes the proceedings of the First International Workshop on Grid Simulator Testing of Wind Turbine Drivetrains, held from June 13 to 14, 2013, at the National Renewable Energy Laboratory's National Wind Technology Center, located south of Boulder, Colorado. The workshop was sponsored by the U.S. Department of Energy and cohosted by the National Renewable Energy Laboratory and Clemson University under ongoing collaboration via a cooperative research and development agreement. The purpose of the workshop was to provide a forum to discuss the research, testing needs, and state-of-the-art apparatuses involved in grid compliance testing of utility-scale wind turbine generators. This includes both dynamometer testing of wind turbine drivetrains ('ground testing') and field testing grid-connected wind turbines. Four sessions followed by discussions in which all attendees of the workshop were encouraged to participate comprised the workshop.

  3. Summary of the Geographic Information System workshop, held in Chicago, Illinois, May 29--30, 1991. Final report, December 1989--December 1991

    Energy Technology Data Exchange (ETDEWEB)

    Thompson, P J; Sullivan, R G; Sundell, R C; Messersmith, J [Argonne National Lab., IL (United States)

    1991-12-01

    The Gas Research Institute, in conjunction with Argonne National Laboratory, sponsored a workshop on May 29--30, 1991, in Chicago, Illinois, to give gas utilities the opportunity to learn about the availability, applications, and benefits of Geographic Information Systems (GISs). This report is a synopsis of that workshop and contains brief discussions, followed by copies of the viewgraphs shown at the workshop, for the following GIS topics: (1) introduction to GIS, (2) data development, (3) analytical functions, (4) use for gas pipeline right-of-way applications, and (5)video imaging and simulation.

  4. History of International Workshop on Mini-Micro- and Nano- Dosimetry (MMND) and Innovation Technologies in Radiation Oncology (ITRO)

    Science.gov (United States)

    Rosenfeld, Anatoly B.; Zaider, Marco; Yamada, Josh; Zelefsky, Michael J.

    2017-01-01

    The biannual MMND (former MMD) - IPCT workshops was founded in collaboration between the Centre for Medical Radiation Physics, University of Wollongong and the Memorial Sloan Kettering Cancer Center (MSKCC) in 2001 and has become an important international multidisciplinary forum for the discussion of advanced quality assurance (QA) dosimetry technology for radiation therapy and space science, as well as advanced technologies for clinical cancer treatment.

  5. FY 2000 international exchange project on exchanges of engineers - Coal mine technology field. Overseas workshop (Indonesia); 2000 nendo gijutsusha koryu jigyo (tanko gijutsu bun'ya) kokusai koryu jigyo. Kaigai workshop (Indonesia)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the purpose of making effective technology exchanges and surveying levels of technology in Indonesia and the needs and possibilities of technology transfer from Japan, workshop was held in Jakarta city on March 1, 2001. Subjects were the following seven: subjects on coal resource and technical strategy in the 21st century, challenge in coal development in Indonesia, geological structure survey at Tanjung Enim coal mine, waste water treatment in Indonesia, outlook for underground mining coal mines, joint research on the centralized monitoring system, and introduction of the optimum high wall coal mining system into open pit mining coal mines in Indonesia. The coal production amount in Indonesia was 75 million tons, and the domestic demand was 22 million tons. Japan imported 14 million tons from Indonesia. In coal mines in Indonesia, most of the coal preparation plants have no waste water treatment facilities. Considering that waste water treatment facilities are necessary for the plants in future, the joint research was made on the simple coal preparation waste water treatment system. (NEDO)

  6. Proceeding of the 5th international workshop on reflectometry

    Energy Technology Data Exchange (ETDEWEB)

    Kawahata, Kazuo (ed.)

    2001-05-01

    This is the proceedings of the 5th International Workshop on Reflectometry, which was held on 5-7 March, 2001, at the National Institute for Fusion Science. In this workshop, the latest experimental results in reflectometry (profile and fluctuations studies), new technological developments and a broad scope of the theory and simulation codes were presented. The 19 of the presented papers are indexed individually. (author)

  7. Proceedings of the Workshop on Acute Lung Injury and Pulmonary Edema Held in Aberdeen Proving Ground, Maryland on 4-5 May 1989

    Science.gov (United States)

    1989-11-01

    with side effects, including pulmonary edema . The objective of this study was to determine if the pulmonary edema was cardiogenic or noncardio- genic...Proeedings ~FL gof the .1Workshop on Acute Lung Injury and Pulmonary Edema 4-5 May 1989a Aberdeen Proving Ground, Maryland I7 21 Sponsored by the...TITLE (include Security Classification) (U) Proceedings of the" Workshop on Acute Lung Injury and Pulmonary Edema , May 1989 12. PERSONAL AUTHOR(S) David

  8. Ninth workshop on geothermal reservoir engineering: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Gudmundsson, J.S. (Stanford Geothermal Program)

    1983-12-15

    The attendance at the Workshop was similar to last year's with 123 registered participants of which 22 represented 8 foreign countries. A record number of technical papers (about 60) were submitted for presentation at the Workshop. The Program Committee, therefore, decided to have several parallel sessions to accommodate most of the papers. This format proved unpopular and will not be repeated. Many of the participants felt that the Workshop lost some of its unique qualities by having parallel sessions. The Workshop has always been held near the middle of December during examination week at Stanford. This timing was reviewed in an open discussion at the Workshop. The Program Committee subsequently decided to move the Workshop to January. The Tenth Workshop will be held on January 22-24, 1985. The theme of the Workshop this year was ''field developments worldwide''. The Program Committee addressed this theme by encouraging participants to submit field development papers, and by inviting several international authorities to give presentations at the Workshop. Field developments in at least twelve countries were reported: China, El Salvador, France, Greece, Iceland, Italy, Japan, Kenya, Mexico, New Zealand, the Philippines, and the United States. There were 58 technical presentations at the Workshop, of which 4 were not made available for publication. Several authors submitted papers not presented at the Workshop. However, these are included in the 60 papers of these Proceedings. The introductory address was given by Ron Toms of the U.S. Department of Energy, and the banquet speaker was A1 Cooper of Chevron Resources Company. An important contribution was made to the Workshop by the chairmen of the technical sessions. Other than Stanford Geothermal Program faculty members, they included: Don White (Field Developments), Bill D'Olier (Hydrothermal Systems), Herman Dykstra (Well Testing), Karsten Pruess (Well Testing), John Counsil

  9. AGS-2000: Experiments for the 21. Century. Proceedings of the workshop held at Brookhaven National Laboratory, May 13--17, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Littenberg, L. [ed.] [Brookhaven National Lab., Upton, NY (United States); Sandweiss, J. [ed.] [Yale Univ., New Haven, CT (United States)

    1996-10-01

    The AGS has a vital and interesting potential for new research. The reasons for this are a fortunate concomitance of the energy chosen for the AGS and the steady stream of technological advances which have both increased the intensity and flexibility of the AGS beams, and the capability of detectors to use these new beam parameters. The physics potentials of the future AGS program can be roughly divided into three broad areas. (1) fundamental elementary particle studies (based on rare kaon decays, rare muon processes and searches for new particles); (2) non-perturbative QCD; and (3) heavy ion physics. The overriding considerations for the operation of the AGS in the next decade must, of course, be the interest and potential of the scientific program. However, once that has been established, there are other aspects of the AGS program which deserve mention. Although experiments at the AGS are of increasing sophistication, they are smaller, less expensive, and more quickly executed than experiments at newer, larger facilities. Finally, the authors note that since the AGS must be maintained as a viable accelerator to serve as an injector to RHIC, the cost of an AGS fixed target experiment need be only the incremental cost of the experiment itself along with some modest additional operating costs. This means that AGS fixed target experiments are substantially cheaper than they would have been before the RHIC era. The remainder of this document contains brief summaries of the experiments considered by the working groups in the AGS-2000 Workshop. These summaries expand on points discussed here.

  10. Proceedings of the Hydrokinetic and Wave Energy Technologies Technical and Environmental Issues Workshop

    Energy Technology Data Exchange (ETDEWEB)

    None

    2006-03-01

    Renewable energy technologies offer the promise of non-polluting alternatives to fossil and nuclear-fueled power plants to meet growing demand for electrical energy. Two emerging categories of renewable energy technologies, hydrokinetic and wave energy conversion devices, offer ways to tap the energy of moving water without impoundment (dams) or diversion required by many conventional hydroelectric facilities. These technologies include devices designed for deployment in natural streams, tidal estuaries, ocean currents, and constructed waterways, as well as devices designed to capture the energy of ocean waves. On October 26-28, 2005, 54 representatives from government, non-governmental organizations, and private business met to (1) identify the varieties of hydrokinetic energy and wave technology devices, their stages of development, and the projected cost to bring each to market; (2) identify where these technologies can best operate; (3) identify the potential environmental issues associated with these technologies and possible mitigation measures; (4) develop a list of research needs and/or practical solutions to address unresolved environmental issues. These workshop proceedings include detailed summaries of the 24 presentations made and the discussions that followed.

  11. A Joint Workshop on Promoting the Development and Deployment of IGCC/Co-Production/CCS Technologies in China and the United States. Workshop report

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Lifeng; Ziao, Yunhan; Gallagher, Kelly Sims

    2009-06-03

    With both China and the United States relying heavily on coal for electricity, senior government officials from both countries have urged immediate action to push forward technology that would reduce carbon dioxide emissions from coal-fired plants. They discussed possible actions at a high-level workshop in April 2009 at the Harvard Kennedy School jointly sponsored by the Belfer Center's Energy Technology Innovation Policy (ETIP) research group, China's Ministry of Science and Technology, and the Chinese Academy of Sciences. The workshop examined issues surrounding Integrated Gasification Combined Cycle (IGCC) coal plants, which turn coal into gas and remove impurities before the coal is combusted, and the related carbon capture and sequestration, in which the carbon dioxide emissions are captured and stored underground to avoid releasing carbon dioxide into the atmosphere. Though promising, advanced coal technologies face steep financial and legal hurdles, and almost certainly will need sustained support from governments to develop the technology and move it to a point where its costs are low enough for widespread use.

  12. Fennoscandian paleo-environment and ice sheet dynamics during Marine Isotope Stage (MIS) 3. Report of a workshop held September 20-21, 2007 in Stockholm, Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Naeslund, Jens-Ove (ed.) (Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden)); Wohlfarth, Barbara (ed.); Alexanderson, Helena (Stockholm Univ., Stockholm (Sweden)) (and others)

    2008-10-15

    This document compiles information on the paleoenvironment for a specific part of the last glacial cycle. The information is relevant for the analysis of climate and climate related processes in the safety assessment SR-Site. In particular, the information was used in setting up climate model simulations performed for SR-Site. The aim of the report is to summarize the state of knowledge on a selected period during the Weichselian glaciation, as presented and discussed during a workshop arranged by SKB in September 2007. The participants of the workshop comprised most of the researches working on this period in Fennoscandia. In the report, the workshop participants have written their own abstracts and also directly contributed to the discussion and conclusions. Considering this aim and content of the report, it was not useful for this document to undergo the SR-Site review process

  13. Proceedings of the Technology Roadmap Workshop on Communication and Control Systems for Distributed Energy Implementation and Testing

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2002-05-01

    More than 50 experts from energy and information technology industries, Federal and State government agencies, universities, and National Laboratories participated in the “Communication and Control Systems for Distributed Energy Implementation and Testing Workshop” in Reston, Virginia, on May 14-15, 2002. This was a unique workshop in that, for the first time, representatives from the information technology sector and those from energy-related industries, Federal and State government agencies, universities, and National Laboratories, gathered to discuss these issues and develop a set of action-oriented implementation strategies. A planning committee of industry, consultant, and government representatives laid the groundwork for the workshop by identifying key participants and developing an appropriate agenda. This document reflects the ideas and priorities discussed by workshop participants.

  14. Workshop Proceedings on Financing the Development and Deployment of Renewable Energy Technologies

    Energy Technology Data Exchange (ETDEWEB)

    None

    1995-05-16

    The Working Party on Renewable Energy (REWP) of the International Energy Agency (IEA) organized a two-day seminar on the role of financing organizations in the development and deployment of renewable energy (RE). The World Bank (WB) and the US Department of Energy (USDOE) hosted the workshop. Delegates were mainly senior government representatives from the 23 IEA member countries, whose responsibilities are related to all or most of the renewable sources of energy. In addition, representatives of the European Union, United Nations, trade organizations, utilities and industries and the WB attended the meeting. The workshop was recognized as an important first step in a dialog required between the parties involved in the development of RE technology, project preparation and the financing of RE. It was also recognized that much more is required--particularly in terms of increased collaboration and coordination, and innovative financing--for RE to enter the market at an accelerated pace, and that other parties (for example from the private sector and recipient countries) need to have increased involvement in future initiatives.

  15. Collaboration tools for the global accelerator network: Workshop Report

    Energy Technology Data Exchange (ETDEWEB)

    Agarwal, Deborah [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Olson, Gary [Univ. of Michigan, Ann Arbor, MI (United States); Olson, Judy [Univ. of Michigan, Ann Arbor, MI (United States)

    2002-09-15

    The concept of a ''Global Accelerator Network'' (GAN) has been put forward as a means for inter-regional collaboration in the operation of internationally constructed and operated frontier accelerator facilities. A workshop was held to allow representatives of the accelerator community and of the collaboratory development community to meet and discuss collaboration tools for the GAN environment. This workshop, called the Collaboration Tools for the Global Accelerator Network (GAN) Workshop, was held on August 26, 2002 at Lawrence Berkeley National Laboratory. The goal was to provide input about collaboration tools in general and to provide a strawman for the GAN collaborative tools environment. The participants at the workshop represented accelerator physicists, high-energy physicists, operations, technology tool developers, and social scientists that study scientific collaboration.

  16. Network workshop

    DEFF Research Database (Denmark)

    Bruun, Jesper; Evans, Robert Harry

    2014-01-01

    research community. With this workshop, participants were offered a way into network science based on authentic educational research data. The workshop was constructed as an inquiry lesson with emphasis on user autonomy. Learning activities had participants choose to work with one of two cases of networks......This paper describes the background for, realisation of and author reflections on a network workshop held at ESERA2013. As a new research area in science education, networks offer a unique opportunity to visualise and find patterns and relationships in complicated social or academic network data....... These include student relations and interactions and epistemic and linguistic networks of words, concepts and actions. Network methodology has already found use in science education research. However, while networks hold the potential for new insights, they have not yet found wide use in the science education...

  17. Network workshop

    DEFF Research Database (Denmark)

    Bruun, Jesper; Evans, Robert Harry

    2014-01-01

    This paper describes the background for, realisation of and author reflections on a network workshop held at ESERA2013. As a new research area in science education, networks offer a unique opportunity to visualise and find patterns and relationships in complicated social or academic network data....... These include student relations and interactions and epistemic and linguistic networks of words, concepts and actions. Network methodology has already found use in science education research. However, while networks hold the potential for new insights, they have not yet found wide use in the science education...... research community. With this workshop, participants were offered a way into network science based on authentic educational research data. The workshop was constructed as an inquiry lesson with emphasis on user autonomy. Learning activities had participants choose to work with one of two cases of networks...

  18. Transportation Management Workshop: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    1993-10-01

    This report is a compilation of discussions presented at the Transportation Management Workshop held in Gaithersburg, Maryland. Topics include waste packaging, personnel training, robotics, transportation routing, certification, containers, and waste classification.

  19. Report of a workshop on nuclear power growth and nonproliferation held at the Woodrow Wilson international center for scholars, Washington, DC, April 21, 2010

    Energy Technology Data Exchange (ETDEWEB)

    Pilat, Joseph F [Los Alamos National Laboratory

    2010-01-01

    The workshop addressed the future of nuclear power and nonproliferation in light of global nuclear energy developments, changing US policy and growing concerns about nuclear proliferation and terrorism. The discussion reflected wide agreement on the need for nuclear power, the necessity of mitigating any proliferation and terrorism risks and support for international cooperation on solutions. There were considerable differences on the nature and extent of the risks of differing fuel cycle choices. There was some skepticism about the prospects for a global nuclear energy renaissance, but there was a recognition that nuclear power would expand somewhat in the decades ahead with some states expanding capacity dramatically (e.g., China) and at least a few new states developing nuclear power programs. It was also argued by some participants that under the right conditions, a genuine renaissance could occur some decades from now. The prospects for a dramatic growth in nuclear power will depend on the ability of governments and industry to address these concerns, including the effectiveness of, and the resources devoted to, plans to develop and implement technologies and approaches that strengthen nonproliferation, nuclear materials accountability and nuclear security Several participants noted that the United States will not be able to continue to lead global nonproliferation efforts and to shape the growth of nuclear power as well as the global environment and energy debates without a robust US nuclear energy program. Some participants argued that fully integrating nuclear energy growth and nonproliferation, proliferation resistance and physical protection objectives was possible. The growing consensus on these objectives and the growing concern about the potential impact of further proliferation on the industry was one reason for optimism. The Blue Ribbon commission led by Scowcroft and Hamilton was seen as going far beyond the need to find an alternative to Yucca

  20. 18th International Workshop on Radiation Imaging Detectors

    CERN Document Server

    2016-01-01

    The International Workshops on Radiation Imaging Detectors are held yearly and provide an international forum for discussing current research and developments in the area of position sensitive detectors for radiation imaging, including semiconductor detectors, gas and scintillator-based detectors. Topics include processing and characterization of detector materials, hybridization and interconnect technologies, design of counting or integrating electronics, readout and data acquisition systems, and applications in various scientific and industrial fields. The workshop will have plenary sessions with invited and contributed papers presented orally and in poster sessions. The invited talks will be chosen to review recent advances in different areas covered in the workshop.

  1. 75 FR 29775 - Food Labeling Workshop; Public Workshop

    Science.gov (United States)

    2010-05-27

    ... and startups. Date and Time: This public workshop will be held on August 4 and 5, 2010, from 8 a.m. to 5 p.m. Location: The public workshop will be held at the Continuing Education Center, 2 East Center St., Fayetteville, AR (located downtown). Contact: David Arvelo, Food and Drug...

  2. Compact X-ray Light Source Workshop Report

    Energy Technology Data Exchange (ETDEWEB)

    Thevuthasan, Suntharampillai; Evans, James E.; Terminello, Louis J.; Koppenaal, David W.; Manke, Kristin L.; Plata, Charity

    2012-12-01

    This report, produced jointly by EMSL and FCSD, is the result of a workshop held in September 2011 that examined the utility of a compact x-ray light source (CXLS) in addressing many scientific challenges critical to advancing energy science and technology.

  3. Proceedings of a Workshop on V/STOL Aircraft Aerodynamics. Volume I. Held at Naval Postgraduate School Monterey, California 16-18 May 1979,

    Science.gov (United States)

    1979-05-18

    proceedings of the workshop contain the papers presented in the five sessions and a transcript of the panel discussion. It is hoped that this...Variables, NASA TM X-62, 248, March 19 73. 5. A. Favre, Equations des Gaz Turbulents Compressibles, J. Mecan . 4, 361 (1965). 6. DR. Kotansk’ and W. IV

  4. Nutritional characterisation of foods: Science-based approach to nutrient profiling - Summary report of an ILSI Europe workshop held in April 2006

    DEFF Research Database (Denmark)

    Tetens, Inge; Oberdörfer, R.; Madsen, C.;

    2007-01-01

    The background of the workshop was the proposed EU legislation to regulate nutrition and health claims for foods in Europe. This regulation will require the development of a science-based nutrient profiling system in order to determine which foods or categories of foods will be permitted to make ...

  5. The Generalisation of Educational Innovations: The Administrator's Perspective. Contributions to a Workshop Held at the International Institute for Educational Planning (Paris, France, December 8-10, 1980).

    Science.gov (United States)

    Malpica, Carlos

    Twelve papers were presented at a 1980 International Institute for Educational Planning (IIEP) workshop on the generalization of educational innovations from the local to the national level. Six of these papers are published in this report, along with a substantial bibliography and an introductory chapter summarizing the papers and describing the…

  6. Technology of production of red figure pottery from Attic and southern Italian workshops.

    Science.gov (United States)

    Mirti, Piero; Gulmini, Monica; Perardi, Alessandra; Davit, Patrizia; Elia, Diego

    2004-10-01

    Samples from Greek figure vases were investigated by scanning electron microscopy coupled with energy dispersive X-ray analysis, X-ray diffraction, thermomechanical analysis and reflectance spectroscopy to achieve a technological characterisation. The vases, dating from the end of the sixth to the fourth century BC, had been excavated at Locri Epizephiri (Calabria, Italy) and attributed to Attic or local workshops, respectively. Information on the morphology of black slip areas and firing temperatures was compared with that previously obtained for Attic and local black gloss pottery from the same site; results show that the peculiar technique required for the production of black slips was mastered by both Attic and local potters and employed for monochrome and figured products. The black coating is usually well vitrified and 15- to 20-microm thick; the evaluated maximum firing temperature is around 900 degrees C, while a temperature lower than 800 degrees C is generally estimated for ceramic body re-oxidation.

  7. Presentations and recorded keynotes of the First European Workshop on Latent Semantic Analysis in Technology Enhanced Learning

    NARCIS (Netherlands)

    Several

    2007-01-01

    Presentations and recorded keynotes at the 1st European Workshop on Latent Semantic Analysis in Technology-Enhanced Learning, March, 29-30, 2007. Heerlen, The Netherlands: The Open University of the Netherlands. Please see the conference website for more information:

  8. Guidelines for the Organization of Short Courses and Workshops on the Dissemination of Data in Science and Technology.

    Science.gov (United States)

    Watson, David G.

    This document presents guidelines on the organization of short courses and workshops on the dissemination of data in science and technology. Such courses can be either of a "stand-alone" nature or they can constitute scientific data components of more general courses in information science. These courses are intended for documentalists,…

  9. Biomass Indirect Liquefaction Strategy Workshop Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2014-07-01

    This report is based on the proceedings of the U.S. Department of Energy Bioenergy Technologies Office Biomass Indirect Liquefaction Strategy Workshop. The workshop, held March 20–21, 2014, in Golden, Colorado, discussed and detailed the research and development needs for biomass indirect liquefaction. Discussions focused on pathways that convert biomass-based syngas (or any carbon monoxide, hydrogen gaseous stream) to liquid intermediates (alcohols or acids) and further synthesize those intermediates to liquid hydrocarbons that are compatible as either a refinery feed or neat fuel.

  10. Advanced Learning Technologies and Learning Networks and Their Impact on Future Aerospace Workforce

    Science.gov (United States)

    Noor, Ahmed K. (Compiler)

    2003-01-01

    This document contains the proceedings of the training workshop on Advanced Learning Technologies and Learning Networks and their impact on Future Aerospace Workforce. The workshop was held at the Peninsula Workforce Development Center, Hampton, Virginia, April 2 3, 2003. The workshop was jointly sponsored by Old Dominion University and NASA. Workshop attendees came from NASA, other government agencies, industry, and universities. The objectives of the workshop were to: 1) provide broad overviews of the diverse activities related to advanced learning technologies and learning environments, and 2) identify future directions for research that have high potential for aerospace workforce development. Eighteen half-hour overviewtype presentations were made at the workshop.

  11. Proceedings of the 1998 diesel engine emissions reduction workshop [DEER

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    This workshop was held July 6--9, 1998 in Castine, Maine. The purpose of this workshop was to provide a multidisciplinary forum for exchange of state-of-the-art information on reduction of diesel engine emissions. Attention was focused on the following: agency/organization concerns on engine emissions; diesel engine issues and challenges; health risks from diesel engines emissions; fuels and lubrication technologies; non-thermal plasma and urea after-treatment technologies; and diesel engine technologies for emission reduction 1 and 2.

  12. Report from the Light Water Reactor Sustainability Workshop on Advanced Instrumentation, Information, and Control Systems and Human-System Interface Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Bruce P. Hallbert; J. J. Persensky; Carol Smidts; Tunc Aldemir; Joseph Naser

    2009-08-01

    . As an initial step in accomplishing this effort, the Light Water Reactor Sustainability Workshop on Advanced Instrumentation, Information, and Control Systems and Human-System Interface Technologies was held March 20–21, 2009, in Columbus, Ohio, to enable industry stakeholders and researchers in identification of the nuclear industry’s needs in the areas of future I&C technologies and corresponding technology gaps and research capabilities. Approaches for collaboration to bridge or fill the technology gaps were presented and R&D activities and priorities recommended. This report documents the presentations and discussions of the workshop and is intended to serve as a basis for the plan under development to achieve the goals of the I&C research pathway.

  13. PREFACE: The first 21 years of reverse Monte Carlo modelling—a workshop held in Budapest, Hungary (1-3 October 2009) The first 21 years of reverse Monte Carlo modelling—a workshop held in Budapest, Hungary (1-3 October 2009)

    Science.gov (United States)

    Keen, David A.; Pusztai, László

    2010-10-01

    This special issue contains a collection of papers reflecting the content of the fourth workshop on reverse Monte Carlo (RMC) methods, held in a hotel on hills overlooking Budapest at the start of October 2009. At this meeting around sixty participants gathered to hear talks and discuss a broad range of science based on the RMC technique in very convivial surroundings. Reverse Monte Carlo modelling is a method for producing three-dimensional disordered structural models in quantitative agreement with experimental data. The method was developed in the late 1980s and has since achieved wide acceptance within the scientific community [1], producing on average over seventy papers and 1000 citations per year in the last five years. It is particularly suitable for studies of the structures of liquid and amorphous materials, as well as the structural analysis of disordered crystalline systems. The principal experimental data that are modelled are obtained from total x-ray or neutron scattering experiments, using the reciprocal space structure factor and/or the real space pair distribution function (PDF). Additional data might be included from extended x-ray absorption fine structure (EXAFS) spectroscopy, Bragg peak intensities or indeed any measured data that can be calculated from a three-dimensional atomistic model. It is this use of total scattering (diffuse and Bragg), rather than just the Bragg peak intensities more commonly used for crystalline structure analysis, which enables RMC modelling to probe the often important deviations from the average crystal structure, to probe the structures of poorly crystalline materials, and the local structures of non-crystalline materials where only diffuse scattering is observed. This flexibility across various condensed matter structure-types has made the RMC method very attractive in a wide range of disciplines, as borne out in the contents of this special issue. It is, however, important to point out that since the method is

  14. ASCR Workshop on Quantum Computing for Science

    Energy Technology Data Exchange (ETDEWEB)

    Aspuru-Guzik, Alan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Van Dam, Wim [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Farhi, Edward [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gaitan, Frank [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Humble, Travis [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Jordan, Stephen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Landahl, Andrew J [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Love, Peter [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Lucas, Robert [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Preskill, John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Muller, Richard P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Svore, Krysta [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Wiebe, Nathan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Williams, Carl [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-06-01

    This report details the findings of the DOE ASCR Workshop on Quantum Computing for Science that was organized to assess the viability of quantum computing technologies to meet the computational requirements of the DOE’s science and energy mission, and to identify the potential impact of quantum technologies. The workshop was held on February 17-18, 2015, in Bethesda, MD, to solicit input from members of the quantum computing community. The workshop considered models of quantum computation and programming environments, physical science applications relevant to DOE's science mission as well as quantum simulation, and applied mathematics topics including potential quantum algorithms for linear algebra, graph theory, and machine learning. This report summarizes these perspectives into an outlook on the opportunities for quantum computing to impact problems relevant to the DOE’s mission as well as the additional research required to bring quantum computing to the point where it can have such impact.

  15. Computing Science - Proceedings of the 7th OVERTURE Workshop

    DEFF Research Database (Denmark)

    This report contains the proceedings of the 7th OVERTURE workshop, held in Eindhoven on 2nd November 2009.......This report contains the proceedings of the 7th OVERTURE workshop, held in Eindhoven on 2nd November 2009....

  16. Optical Network Testbeds Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Joe Mambretti

    2007-06-01

    technologies. Several years ago, when many of these optical networking research topics were first being investigated, they were the subject of controversial debate. The new techniques challenged many long-held concepts related to architecture and technology. However, today all major networking organizations are transitioning toward infrastructure that incorporates these new concepts. This progress has been assisted through the series of Optical Networking Testbed Workshops (ONT). The first (ONT1) outlined a general framework of key issues and topics and developed a series of recommendations (www.nren.nasa.gov/workshop7). The second (ONT2) developed a common vision of optical network technologies, services, infrastructure, and organizations (www.nren.nasa.gov/workshop8). Processes that allow for a common vision encourage widespread deployment of these types of resources among advanced networking communities. Also, such a shared vision enables key concepts and technologies to migrate from basic research testbeds to wider networking communities. The ONT-3 workshop built on these earlier activities by expanding discussion to include additional considerations of the international interoperability and of greater impact of optical networking technology on networking in general. In accordance with this recognition, the workshop confirmed that future-oriented research and development is indispensable to fundamentally change the current Internet architecture to create a global network incorporating completely new concepts. The workshop also recognized that the first priority to allow for this progress is basic research and development, including international collaborative activities, which are important for the global realization of interoperability of a new generation architecture.

  17. Proceedings of the NATO IST-128 Workshop: Assessing Mission Impact of Cyberattacks Held in Istanbul, Turkey on 15-17 June 2015

    Science.gov (United States)

    2015-12-01

    the NATO IST-128 Workshop: Assessing Mission Impact of Cyberattacks 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6...by the by Department of the Air Force under Air Force Contract FA8721-05-C-0002. Opinions, interpretations, conclusions and recommendations are...Level Modeling ( MLM ) [20]. MLM leverages BPMN to define, refine, and verify operational processes, decisions, and information flows among producer

  18. Biophysics of Electroreception Workshop on Transduction of Nanovolt Signals: Limits of Electric-Field Detection Held in La Jolla, California on 19- 21 November 1989

    Science.gov (United States)

    1989-11-21

    Oceanography 99University of California, San Diego La Jolla, California -A C)b FINAL REPORT BIOPHYSICS OF ELECTRORECEPTION WORKSHOP November 19-21...electric-field detection. To obtain detailed information on the electroreceptive membrane and its ionic channels, high-resolution recording techniques...tissues, and organs of the human body. The electroreceptive membranes also provide a unique opportunity for com- paring the ionic mechanism of the animals

  19. Information Management in the Department of Defense: The Role of Librarians. Proceedings of the Military Librarians Workshop (24th) 15-17 October 1980, held at Monterey, California

    Science.gov (United States)

    1983-07-01

    you, I have asked Paul Klinefelter to read my speech. Furthermore, I want to extend to you an invitation: If you are in Washington and wish to talk to...Challenge and the Opportunity, and what your role is. I’m familiar with the very honorable history of this Workshop and the considerable record of...accomplishment in its twenty-four year history . That oeriod has seen librarians and technical information specialists acquire an importance to the Defense

  20. Workshop `Measurement technology for steady state and transient multi phase flows`; Workshop `Messtechnik fuer stationaere und transiente Mehrphasenstroemungen`

    Energy Technology Data Exchange (ETDEWEB)

    Prasser, H.M. [ed.

    1997-12-01

    There is hardly another area of physics which has a comparable multiplicity of phenomena, like flow in multi-phase mixtures. The wishes of experimenters regarding measurement technique are correspondingly great: Apart from the conventional parameters of pressure, temperature and speed of flow, as great a collection with resolution of the instantaneous phase distribution is required. Also, the phases themselves frequently consists of several components, whose concentration should also be measured. The enormous progress which has recently been made with laser optics and tomographic processes, must be compared with a long list of unsolved problems, above all where non-contact measurement is concerned. The attempts at solutions are multifarious, the need for the exchange of experience is great and the comparson of measurement processes with one another must be strengthened. The workshop has set itself these targets. (orig.) [Deutsch] Es gibt kaum ein anderes Gebiet der Physik, das eine vergleichbare Vielfalt der Erscheinungen aufweist wie Stroemungen von Mehrphasengemischen. Entsprechend gross sind die Wuensche der Experimentatoren hinsichtlich der Messtechnik: Neben den klassischen Parametern Druck, Temperatur und Stroemungsgeschwindigkeit wird eine moeglichst hoch aufloesende Erfassung der momentanen Phasenverteilung benoetigt. Ausserdem bestehen die Phasen selbst haeufig aus mehreren Komponenten, deren Konzentration ebenfalls gemessen werden soll. Den enormen Fortschritten, ie mit laseroptischen und tomographischen Verfahren in letzter Zeit gemacht wurden, steht nach wie vor eine lange Liste bisher ungeloester Aufgaben gegenueber, vor allen Dingen, wenn beruehrungslos gemessen werden soll. Die Loesungsansaetze sind vielfaeltig, der Bedarf an Erfahrungsaustausch ist gross, der Vergleich der Messverfahren untereinander muss verstaerkt werden. Diesen Zielen hatte sich der Workshop ``Messtechnik fuer tationaere und transiente Mehrphasenstroemungen`` verschrieben.

  1. Highlights of NASA's Special ETO Program Planning Workshop on rocket-based combined-cycle propulsion system technologies

    Science.gov (United States)

    Escher, W. J. D.

    1992-01-01

    A NASA workshop on rocket-based combined-cycle propulsion technologies is described emphasizing the development of a starting point for earth-to-orbit (ETO) rocket technologies. The tutorial is designed with attention given to the combined development of aeronautical airbreathing propulsion and space rocket propulsion. The format, agenda, and group deliberations for the tutorial are described, and group deliberations include: (1) mission and space transportation infrastructure; (2) vehicle-integrated propulsion systems; (3) development operations, facilities, and human resource needs; and (4) spaceflight fleet applications and operations. Although incomplete the workshop elevates the subject of combined-cycle hypersonic propulsion and develops a common set of priniciples regarding the development of these technologies.

  2. Collaborative Problem-Solving Environments; Proceedings for the Workshop CPSEs for Scientific Research, San Diego, California, June 20 to July 1, 1999

    Energy Technology Data Exchange (ETDEWEB)

    Chin, George

    1999-01-11

    A workshop on collaborative problem-solving environments (CPSEs) was held June 29 through July 1, 1999, in San Diego, California. The workshop was sponsored by the U.S. Department of Energy and the High Performance Network Applications Team of the Large Scale Networking Working Group. The workshop brought together researchers and developers from industry, academia, and government to identify, define, and discuss future directions in collaboration and problem-solving technologies in support of scientific research.

  3. Proceedings of the International Workshop on Water Waves and Floating Bodies (16th) Held in Hiroshima, Japan on April 22-25, 2001

    Science.gov (United States)

    2001-04-25

    objets flottants support6is par des coussins d’air.", 8eme Journdes de l’Hydrodynamique, Nantes, France. [3] NAKOS D.E., NESTEGARD A., ULSTEIN T...order terms in 0,; see Nakos and Sclavounos, 1991 [2], for details. However, Raven, 1996 [3], pointed out that the A( terms can be quite irregular and...Havelock Singularities," 14th International Workshop on Water Waves and Floating Bodies, Port Huron, Michigan, 1999, pp 133-37. [2] Nakos ,D. and

  4. Improving Hatchery Effectiveness as Related to Smoltification: Proceedings of a Workshop held at Kah-Nee-Tah Lodge, Warm Springs, Oregon, May 20-23, 1985.

    Energy Technology Data Exchange (ETDEWEB)

    Bouck, Gerald R.

    1987-05-01

    The Bonneville Power Administration (BPA) intends to develop a smoltification research effort that would have broad support among the interested parties. BPA sponsored this workshop on smoltification and related research to gather leading technical experts in the field in smoltification, permit them to exchange information about the state of the art of smoltification research, and allow them to identify and rank high-priority projects. This document includes keynote speeches, technical papers, and other sessions that summarize both what is known and what information is needed.

  5. Iron biogeochemistry across marine systems at changing times – conclusions from the workshop held in Gothenburg, Sweden (14–16 May 2008

    Directory of Open Access Journals (Sweden)

    E. Breitbarth

    2009-07-01

    Full Text Available Based on an international workshop (Gothenburg, 14–16 May 2008, this review article aims to combine interdisciplinary knowledge from coastal and open ocean research on iron biogeochemistry. The major scientific findings of the past decade are structured into sections on natural and artificial iron fertilization, iron inputs into coastal and estuarine systems, colloidal iron and organic matter, and biological processes. Potential effects of global climate change, particularly ocean acidification, on iron biogeochemistry are discussed. The findings are synthesized into recommendations for future research areas.

  6. The use of mechanisms and modes of toxic action in integrated testing strategies: the report and recommendations of a workshop held as part of the European Union OSIRIS Integrated Project.

    Science.gov (United States)

    Vonk, J Arie; Benigni, Romualdo; Hewitt, Mark; Nendza, Monika; Segner, Helmut; van de Meent, Dik; Cronin, Mark T D

    2009-11-01

    This report on The Potential of Mode of Action (MoA) Information Derived from Non-testing and Screening Methodologies to Support Informed Hazard Assessment, resulted from a workshop organised within OSIRIS (Optimised Strategies for Risk Assessment of Industrial Chemicals through Integration of Non-test and Test Information), a project partly funded by the EU Commission within the Sixth Framework Programme. The workshop was held in Liverpool, UK, on 30 October 2008, with 35 attendees. The goal of the OSIRIS project is to develop integrated testing strategies (ITS) fit for use in the REACH system, that would enable a significant increase in the use of non-testing information for regulatory decision making, and thus minimise the need for animal testing. One way to improve the evaluation of chemicals may be through categorisation by way of mechanisms or modes of toxic action. Defining such groups can enhance read-across possibilities and priority settings for certain toxic modes or chemical structures responsible for these toxic modes. Overall, this may result in a reduction of in vivo testing on organisms, through combining available data on mode of action and a focus on the potentially most-toxic groups. In this report, the possibilities of a mechanistic approach to assist in and guide ITS are explored, and the differences between human health and environmental areas are summarised.

  7. Proceedings of the Workshop on Proximity Graphs (1st) Held in Las Cruces, New Mexico on 30 November-2 December 1989

    Science.gov (United States)

    1991-05-31

    NMSU--particularly Ken Paap, Roger Schvaneveldt, Jim McDonald, Art Knoebel, and Keith Phillips--with whom many profitable discussions were held; to...the Department of Computer Science and the College of Arts and Sci- ences at NMSU, for their support and encouragement; and to Frank Harary, whose...Tech. Rept., in press. [AB85] P. F. Ash and E. D. Bolker, "Recognizing Dirichlet tessellations," Geometria Ded- icata, vol. 19, 1985, pp. 175-206

  8. International Workshop on Advances in Inorganic Fibre Technology Held in Melbourne, Australia on August 13 - 14, 1992

    Science.gov (United States)

    1992-08-14

    1140- 1220 Creep-related limitations of current polycrystalline 67 ceramic fibres (J.A. DiCarlo, USA) 1220- 1330 Lunch Friday, 14 August (Contd.) Session...Mat6riaux P.M. Fourt B.P. 87 91003 EVRY CEDEX FRANCE Ceramic fibres of potential interest for reinforcement may be divided into four very ’different...have been produced on both tungsten and pitch based carbon fibre cores and can be used to reinforce metals. Small diameter ceramic fibres began to appear

  9. Proceedings of the Antiproton Science and Technology Workshop Held in Santa Monica, California on 6-9 October 1987

    Science.gov (United States)

    1988-07-01

    from 135 to 300 K", J. Chem. Phys. 65(4), 1539-41 (1976). 433 1975 66. Carsky, Petr; Zahradnik, Rudolf ;-Hobza, Pavel, "Semiempirical Estimates of the...280 (1979). [22’ D. L. Morgan and V. W. Hughes, Phys. Rev. A7, 1811 (1973). [23] H. M. Rosenstock, K. Draxl, B. W. Steiner , and. J. T. Herron, J...ANTIPROTON ANNIHILATION PROCESSES 1960 L.E. Agnew, Jr., T. Elioff, W.B. Fowler, R.L. Lander, W.M.Powell, E. Sergi, H.M. Steiner , H.S. White, C. Wiegand

  10. Proceedings of the Systems Reengineering Technology Workshop (4th) held in Monterey, California on February 8 - 10, 1994

    Science.gov (United States)

    1994-09-01

    includes the following: initial state of the system under SYSTEM DESIGN ANNOTATION I design; environmental conditions including acoustic, electromagnetic ...The operating systems are designed as state variables as well as global variables, semaphores highly optimized microkernels in which functionality...these constraints, hardware/software components, and the exploitation Decomposition of a system into a set of services microkernel based O.S. Strict

  11. Renewable Energy Technologies for Decentralised Rural Electricity Services. Report from an International Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Kjellstroem, Bjoern; Arvidson, Anders; Forslund, Helena; Martinac, Ivo (eds.)

    2005-02-01

    The developing countries represented at the workshop were Brazil, India, Kenya, Mali, Mongolia, Nepal and Uganda. After keynote presentations which covered the experiences of different renewable electricity generation technologies in selected developing countries, the participants discussed the role of electrification in rural development, needs for further technological improvements and the needs for development of government policies for promotion of renewable energy for electricity generation. Finally, the participants discussed and agreed on recommendations addressed to donor agencies for consideration when formulating a revised Energy Policy. Renewable energy technologies should only be considered when these offer more advantages than the conventional alternatives - grid connection or stand-alone diesel generators. Such advantages may be lower costs, better supply reliability, fewer adverse local environmental impacts or better possibilities for local income-generating activities. Local needs and priorities must determine the choice of technology. Biomass-fuelled renewable technologies have a particularly strong potential in generating local economic activities compared to conventional supply options. Technologies for decentralised electricity generation using mini-hydro power plants, solar photovoltaics (PV), wind generators and biomass fuels are commercially available and are being applied in many developing countries. The limiting factors for further penetration of renewable energy are today linked to issues of cost, reliability, financing, service infrastructure, awareness of available technology and trust in the technologies from the perspective of entrepreneurs and end-users. One important limiting factor related to cost, is the capacity range within which each technology can compete with the conventional options. PV systems are still only realistic for very small power demands, whereas technologies using biomass fuels are unrealistic for small power

  12. Small genomes: New initiatives in mapping and sequencing. Workshop summary report

    Energy Technology Data Exchange (ETDEWEB)

    McKenney, K. [National Inst. of Standards and Technology, Gaithersburg, MD (United States). Biotechnology Div.; Robb, F. [Univ. of Maryland Biotechnology Inst., Baltimore, MD (United States). Center of Marine Biotechnology

    1993-12-31

    The workshop was held 5--7 July 1993 at the Center for Advanced Research in Biotechnology (CARB) and hosted by the University of Maryland Biotechnology Institute (UMBI) and the National Institute of Standards and Technology (NIST). The objective of this workshop was to bring together individuals interested in DNA technologies and to determine the impact of these current and potential improvements of the speed and cost-effectiveness of mapping and sequencing on the planning of future small genome projects. A major goal of the workshop was to spur the collaboration of more diverse groups of scientists working on this topic, and to minimize competitiveness as an inhibitory factor to progress.

  13. Ke Alahaka Program of the Advanced Technology Solar Telescope (ATST) Mitigation Initiative Provides STEM Workshops for Native Hawaiian Students

    Science.gov (United States)

    Coopersmith, A.; Cie, D. K.; Naho`olewa, D.; Chirico, J.

    2012-12-01

    The Advanced Technology Solar Telescope (ATST) Mitigation Initiative and the Kahikina O Ka Lā Program are NSF-funded projects at the University of Hawai`i Maui College. These projects will provide instruction and activities intended to increase diversity in STEM or STEM-related careers. Ke Alahaka, the 2012 summer bridge program, was offered to Native Hawaiian high-school students who indicated an interest in STEM areas. Three STEM-content workshops were offered including Marine Science, Sustainable Energy Technology, and Computer Science and Engineering. Students attended hands-on classes three days a week for a month concentrating on only one of the three topics. On the other days, students participated in a Hawaiian Studies course designed to provide a cultural context for the STEM instruction. Focus groups and other program assessments indicate that 50% of the 60 students attending the workshops intend to pursue a STEM major during their undergraduate studies.

  14. 17th Workshop on Crystalline Silicon Solar Cells and Modules: Materials and Processes; Workshop Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Sopori, B. L.

    2007-08-01

    The National Center for Photovoltaics sponsored the 17th Workshop on Crystalline Silicon Solar Cells & Modules: Materials and Processes, held in Vail, CO, August 5-8, 2007. This meeting provided a forum for an informal exchange of technical and scientific information between international researchers in the photovoltaic and relevant non-photovoltaic fields. The theme of this year's meeting was 'Expanding Technology for a Future Powered by Si Photovoltaics.'

  15. Capacity building for research: report on a UNION Strategic Planning Workshop. Report of a workshop held during the International Union Against Tuberculosis and Lung Disease World Conference on Lung Health, Montreal, Canada, 7 October 2002.

    Science.gov (United States)

    White, N W

    2004-07-01

    The International Union Against Tuberculosis and Lung Disease (UNION) has a decade of experience in conducting short courses on research methods for the promotion of lung health. In a parallel initiative, the UNION has collaborated with the American Thoracic Society (ATS) to develop courses on international respiratory epidemiology that have been expanded by the ATS throughout Latin America. The two initiatives have similar aims, and the courses offered by the two organisations have intentionally been similar in terms of focus and complementary in regions targeted. The target regions of the UNION, drawing on several decades of experience in offering short courses on tuberculosis, have been Africa, the Black Sea Rim, the Middle East and Asia, while the target regions of the ATS have been Central and South America. This workshop aimed first to provide an opportunity for those who have taught on the courses and those who have participated to share their experiences and learn from them, and second to provide a basis on which to develop a strategic plan for future courses. This report summarises the contributions of the workshop participants and the conclusions reached.

  16. Personalized respiratory medicine: exploring the horizon, addressing the issues. Summary of a BRN-AJRCCM workshop held in Barcelona on June 12, 2014.

    Science.gov (United States)

    Agustí, Alvar; Antó, Josep Maria; Auffray, Charles; Barbé, Ferran; Barreiro, Esther; Dorca, Jordi; Escarrabill, Joan; Faner, Rosa; Furlong, Laura I; Garcia-Aymerich, Judith; Gea, Joaquim; Lindmark, Bertil; Monsó, Eduard; Plaza, Vicente; Puhan, Milo A; Roca, Josep; Ruiz-Manzano, Juan; Sampietro-Colom, Laura; Sanz, Ferran; Serrano, Luis; Sharpe, James; Sibila, Oriol; Silverman, Edwin K; Sterk, Peter J; Sznajder, Jacob I

    2015-02-15

    This Pulmonary Perspective summarizes the content and main conclusions of an international workshop on personalized respiratory medicine coorganized by the Barcelona Respiratory Network ( www.brn.cat ) and the AJRCCM in June 2014. It discusses (1) its definition and historical, social, legal, and ethical aspects; (2) the view from different disciplines, including basic science, epidemiology, bioinformatics, and network/systems medicine; (3) the bottlenecks and opportunities identified by some currently ongoing projects; and (4) the implications for the individual, the healthcare system and the pharmaceutical industry. The authors hope that, although it is not a systematic review on the subject, this document can be a useful reference for researchers, clinicians, healthcare managers, policy-makers, and industry parties interested in personalized respiratory medicine.

  17. CMC Participation in the Regional Centre for Strategic Studies (RCSS) Workshop: Defense, Technology and Cooperative Security in South Asia

    Energy Technology Data Exchange (ETDEWEB)

    Biringer, K.L.; Olsen, J.

    1998-11-01

    As an ongoing part of the collaborative efforts between the Cooperative Monitoring Center (CMC) at Sandia National Laboratories, the United States Arms Control and Disarmament Agency (ACDA), and U.S. Department of Energy (DOE), staff from the CMC served as faculty in conducting a workshop in Shanghai, China. Sponsor of the workshop was the Regional Centre for Strategic Studies (RCSS) based in Colombo, Sri Lanka. The workshop included participants from throughout South Asia and China. The CMC presented four sessions related to the role of monitoring technologies in promoting regional security and building confidence among nations. Participation in these workshops supports U.S. efforts to further regional cooperation and promote arms control, nonproliferation and other cooperative securily measures and supplements efforts funded by DOE and ACDA over the past four years. The RCSS Shanghai meeting permitted a continued CMC involvement in regionally conducted training for anew generation of leaders in government, the military, and academia throughout South Asia and China. Nuclear issues are clearly a dominant South Asian concern since the nuclear tests of May 1998. However, there remains a strong interest in identifying opportunities for increased trade and reduced tensions in other areas. The RCSS and other regional organizations are enthusiastic about continued CMC involvement in future regional courses.

  18. The Second Halden Reactor Project Workshop on Virtual Reality: Session Summaries from the November 2001 Meeting

    Energy Technology Data Exchange (ETDEWEB)

    Louka, Michael N.; Sebok, Angelia

    2002-06-15

    A workshop was held in Halden 7th-8th November 2001 to discuss VR (virtual reality) applications in the process control industry. In particular, the discussion topics focussed on design verification and validation, maintenance and operation training, and decommissioning and outage planning. The workshop participants indicated a clear interest in both current and potential use of VR technology. These participants represented a diverse range of disciplines, as well as utilities, vendors and regulators. (Author)

  19. IMI Workshop on Optimization in the Real World

    CERN Document Server

    Shinano, Yuji; Waki, Hayato

    2016-01-01

    This book clearly shows the importance, usefulness, and powerfulness of current optimization technologies, in particular, mixed-integer programming and its remarkable applications. It is intended to be the definitive study of state-of-the-art optimization technologies for students, academic researchers, and non-professionals in industry. The chapters of this book are based on a collection of selected and extended papers from the  “IMI Workshop on Optimization in the Real World” held in October 2014 in Japan.

  20. Renewable Energy Technologies for Decentralised Rural Electricity Services. Report from an International Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Kjellstroem, Bjoern; Arvidson, Anders; Forslund, Helena; Martinac, Ivo (eds.)

    2005-02-01

    The developing countries represented at the workshop were Brazil, India, Kenya, Mali, Mongolia, Nepal and Uganda. After keynote presentations which covered the experiences of different renewable electricity generation technologies in selected developing countries, the participants discussed the role of electrification in rural development, needs for further technological improvements and the needs for development of government policies for promotion of renewable energy for electricity generation. Finally, the participants discussed and agreed on recommendations addressed to donor agencies for consideration when formulating a revised Energy Policy. Renewable energy technologies should only be considered when these offer more advantages than the conventional alternatives - grid connection or stand-alone diesel generators. Such advantages may be lower costs, better supply reliability, fewer adverse local environmental impacts or better possibilities for local income-generating activities. Local needs and priorities must determine the choice of technology. Biomass-fuelled renewable technologies have a particularly strong potential in generating local economic activities compared to conventional supply options. Technologies for decentralised electricity generation using mini-hydro power plants, solar photovoltaics (PV), wind generators and biomass fuels are commercially available and are being applied in many developing countries. The limiting factors for further penetration of renewable energy are today linked to issues of cost, reliability, financing, service infrastructure, awareness of available technology and trust in the technologies from the perspective of entrepreneurs and end-users. One important limiting factor related to cost, is the capacity range within which each technology can compete with the conventional options. PV systems are still only realistic for very small power demands, whereas technologies using biomass fuels are unrealistic for small power

  1. Summary and report on four national environmental workshops

    Energy Technology Data Exchange (ETDEWEB)

    House, Peter W.

    1980-07-01

    Individual abstracts were prepared for the summaries of four workshops held during the last two years: (1) Integrated Assessment for Energy Related Environmental Standards Workshop - Berkeley, California, November 1978; (2) National Ecological Assessment Workshop - Savannah, Georgia, January 1979; (3) National/Regional Modelling Workshop - Reston, Virginia, May 1979; (4) Groundwater Workshop - Albuquerque, New Mexico, January 1980. (JGB)

  2. 16th Workshop on High Energy Spin Physics

    CERN Document Server

    2016-01-01

    The Workshop will cover a wide range of spin phenomena at high and intermediate energies such as: recent experimental data on spin physics the nucleon spin structure and GPD's spin physics and QCD spin physics in the Standard Model and beyond T-odd spin effects polarization and heavy ion physics spin in gravity and astrophysics the future spin physics facilities spin physics at NICA polarimeters for high energy polarized beams acceleration and storage of polarized beams the new polarization technology related subjects The Workshop will be held in the Bogoliubov Laboratory of Theoretical Physics of the Joint Institute for Nuclear Research, 141980 Dubna, Moscow Region, Russia. The program of the workshop will include plenary and parallel (if necessary) sessions. Plenary sessions will be held in the Conference Hall. Parallel sections will take place in the same building. There will be invited talks (up to 40 min) and original reports (20 min). The invited speakers will present new experimental and theoretical re...

  3. Proceedings from the Workshop on Phytoremediation of Inorganic Contaminants

    Energy Technology Data Exchange (ETDEWEB)

    J. T. Brown; G. Matthern; A. Glenn (INEEL); J. Kauffman (EnviroIssues); S. Rock (USEPA); M. Kuperberg (Florida State U); C. Ainsworth (PNNL); J. Waugh (Roy F. Weston Assoc.)

    2000-02-01

    The Metals and Radionuclides Product Line of the US Department of Energy (DOE) Subsurface Contaminants Focus Area (SCFA) is responsible for the development of technologies and systems that reduce the risk and cost of remediation of radionuclide and hazardous metal contamination in soils and groundwater. The rapid and efficient remediation of these sites and the areas surrounding them represents a technological challenge. Phytoremediation, the use of living plants to cleanup contaminated soils, sediments, surface water and groundwater, is an emerging technology that may be applicable to the problem. The use of phytoremediation to cleanup organic contamination is widely accepted and is being implemented at numerous sites. This workshop was held to initiate a discussion in the scientific community about whether phytoremediation is applicable to inorganic contaminants, such as metals and radionuclides, across the DOE complex. The Workshop on Phytoremediation of Inorganic Contaminants was held at Argonne National Laboratory from November 30 through December 2, 1999. The purpose of the workshop was to provide SCFA and the DOE Environmental Restoration Program with an understanding of the status of phytoremediation as a potential remediation technology for DOE sites. The workshop was expected to identify data gaps, technologies ready for demonstration and deployment, and to provide a set of recommendations for the further development of these technologies.

  4. Air-Based Remediation Workshop - Section 8 Air-Based Remediation Technology Selection Logic

    Science.gov (United States)

    Pursuant to the EPA-AIT Implementing Arrangement 7 for Technical Environmental Collaboration, Activity 11 "Remediation of Contaminated Sites," the USEPA Office of International Affairs Organized a Forced Air Remediation Workshop in Taipei to deliver expert training to the Environ...

  5. Improving Nigerian health policymakers' capacity to access and utilize policy relevant evidence: outcome of information and communication technology training workshop.

    Science.gov (United States)

    Uneke, Chigozie Jesse; Ezeoha, Abel Ebeh; Uro-Chukwu, Henry; Ezeonu, Chinonyelum Thecla; Ogbu, Ogbonnaya; Onwe, Friday; Edoga, Chima

    2015-01-01

    Information and communication technology (ICT) tools are known to facilitate communication and processing of information and sharing of knowledge by electronic means. In Nigeria, the lack of adequate capacity on the use of ICT by health sector policymakers constitutes a major impediment to the uptake of research evidence into the policymaking process. The objective of this study was to improve the knowledge and capacity of policymakers to access and utilize policy relevant evidence. A modified "before and after" intervention study design was used in which outcomes were measured on the target participants both before the intervention is implemented and after. A 4-point likert scale according to the degree of adequacy; 1 = grossly inadequate, 4 = very adequate was employed. This study was conducted in Ebonyi State, south-eastern Nigeria and the participants were career health policy makers. A two-day intensive ICT training workshop was organized for policymakers who had 52 participants in attendance. Topics covered included: (i). intersectoral partnership/collaboration; (ii). Engaging ICT in evidence-informed policy making; use of ICT for evidence synthesis; (iv) capacity development on the use of computer, internet and other ICT. The pre-workshop mean of knowledge and capacity for use of ICT ranged from 2.19-3.05, while the post-workshop mean ranged from 2.67-3.67 on 4-point scale. The percentage increase in mean of knowledge and capacity at the end of the workshop ranged from 8.3%-39.1%. Findings of this study suggest that policymakers' ICT competence relevant to evidence-informed policymaking can be enhanced through training workshop.

  6. FEATURES OF THE USE OF COMPUTER AND INTERNET TECHNOLOGY IN THE WORKSHOPS ON LABOR TRAINING FOR SECONDARY SCHOOL PUPILS

    Directory of Open Access Journals (Sweden)

    Petro M. Bisirkin

    2013-09-01

    Full Text Available The article discusses the features of the use of Internet technologies in the workshops on labor training in secondary school. Training programs include the study of various technologies using web resources. The Internet offers many different training and educational materials that expand the opportunities for students to model and explore the processes, create their own products and projects under the subject "Labor Training". The effective use of educational online resources depends on the availability of ICT, their technical level, the ability of users efficiently search and use them at various stages of the learning process.

  7. Minnowbrook V: 2006 Workshop on Unsteady Flows in Turbomachinery

    Science.gov (United States)

    LaGraff, John E.; Ashpis, David E.; Oldfield, Martin L. G.; Gostelow, J. Paul

    2006-01-01

    This CD-ROM contain materials presented at the Minnowbrook V 2006 Workshop on Unsteady Flows in Turbomachinery, held at the Syracuse University Minnowbrook Conference Center, New York, on August 20-23, 2006. The workshop organizers were John E. LaGraff (Syracuse University), Martin L.G. Oldfield (Oxford University), and J. Paul Gostelow (University of Leicester). The workshop followed the theme, venue, and informal format of four earlier workshops: Minnowbrook I (1993), Minnowbrook II (1997), Minnowbrook III (2000), and Minnowbrook IV (2003). The workshop was focused on physical understanding of unsteady flows in turbomachinery, with the specific goal of contributing to engineering application of improving design codes for turbomachinery. The workshop participants included academic researchers from the United States and abroad and representatives from the gas-turbine industry and U.S. Government laboratories. The physical mechanisms discussed were related to unsteady wakes, active flow control, turbulence, bypass and natural transition, separation bubbles and turbulent spots, modeling of turbulence and transition, heat transfer and cooling, surface roughness, unsteady CFD, and DNS. This CD-ROM contains copies of the viewgraphs presented, organized according to the workshop sessions. Full-color viewgraphs and animations are included. The workshop summary and the plenary discussion transcripts clearly highlight the need for continued vigorous research in the technologically important area of unsteady flows in turbomachines.

  8. Workshop on algorithms for macromolecular modeling. Final project report, June 1, 1994--May 31, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Leimkuhler, B.; Hermans, J.; Skeel, R.D.

    1995-07-01

    A workshop was held on algorithms and parallel implementations for macromolecular dynamics, protein folding, and structural refinement. This document contains abstracts and brief reports from that workshop.

  9. Proceedings of the fifth Australia-Japan workshop on plasma diagnostics

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The fifth Australia-Japan Workshop on Plasma Diagnostics was held at Japan Atomic Energy Research Institute (JAERI), Naka, Japan, from December 15 to 17 in 1999. The first workshop was held at JAERI, Naka in 1989, and the workshops have been held almost every two years in Australia and Japan under the Agreement between the Government of Japan and the Government of Australia on cooperation in the field of Science and Technology. In the workshops, latest research works for plasma diagnostics and plasma experiment have been presented and discussed. The research works of both countries have been developed, and the mutual understanding became deeper through the workshops. In the fifth workshop, the statuses of JT-60U (JAERI), LHD (National Institute for Fusion Science) and H-1NF (Australian National University) were introduced, and the latest research works for plasma diagnostics were also presented. The active and deeper discussions were performed. This report contains twenty-eight papers presented at the workshop. The 25 of the presented papers are indexed individually. (J.P.N.)

  10. Food fermentation: a safety and nutritional assessment. Joint FAO/WHO Workshop on Assessment of Fermentation as a Household Technology for Improving Food Safety.

    OpenAIRE

    Motarjemi, Y.; Nout, M. J.

    1996-01-01

    An assessment of the food-safety and nutritional aspects of lactic acid fermentation for the preparation of weaning food at the household level was carried out during a Joint FAO/WHO Workshop held in Pretoria, South Africa, in December 1995. In particular, lactic acid fermentation was evaluated as a part of food preparation processes involving other operations such as soaking, cooking, and the germination of cereal grains. The use of germinated cereals is of particular interest since they can...

  11. AAAI-07 Workshop Reports

    OpenAIRE

    Anand, Sarabjot Singh; Bahls, Daniel; Burghart, Catherina R.; Burstein, Mark; Chen, Huajun; Collins, John; Dietterich, Tom; Doyle, Jon; Drummond, Chris; Elazmeh, William; Geib, Christopher; Goldsmith, Judy; Guesgen, Hans W.; Hendler, Jim; Jannach, Dietmar

    2007-01-01

    The AAAI-07 workshop program was held Sunday and Monday, July 22-23, in Vancouver, British Columbia, Canada. The program included the following thirteen workshops: (1) Acquiring Planning Knowledge via Demonstration; (2) Configuration; (3) Evaluating Architectures for Intelligence; (4) Evaluation Methods for Machine Learning; (5) Explanation-Aware Computing; (6) Human Implications of Human-Robot Interaction; (7) Intelligent Techniques for Web Personalization; (8) Plan, Activity, and Intent Rec...

  12. Genetic Engineering Workshop Report, 2010

    Energy Technology Data Exchange (ETDEWEB)

    Allen, J; Slezak, T

    2010-11-03

    The Lawrence Livermore National Laboratory (LLNL) Bioinformatics group has recently taken on a role in DTRA's Transformation Medical Technologies (TMT) program. The high-level goal of TMT is to accelerate the development of broad-spectrum countermeasures. To achieve this goal, there is a need to assess the genetic engineering (GE) approaches, potential application as well as detection and mitigation strategies. LLNL was tasked to coordinate a workshop to determine the scope of investments that DTRA should make to stay current with the rapid advances in genetic engineering technologies, so that accidental or malicious uses of GE technologies could be adequately detected and characterized. Attachment A is an earlier report produced by LLNL for TMT that provides some relevant background on Genetic Engineering detection. A workshop was held on September 23-24, 2010 in Springfield, Virginia. It was attended by a total of 55 people (see Attachment B). Twenty four (44%) of the attendees were academic researchers involved in GE or bioinformatics technology, 6 (11%) were from DTRA or the TMT program management, 7 (13%) were current TMT performers (including Jonathan Allen and Tom Slezak of LLNL who hosted the workshop), 11 (20%) were from other Federal agencies, and 7 (13%) were from industries that are involved in genetic engineering. Several attendees could be placed in multiple categories. There were 26 attendees (47%) who were from out of the DC area and received travel assistance through Invitational Travel Orders (ITOs). We note that this workshop could not have been as successful without the ability to invite experts from outside of the Beltway region. This workshop was an unclassified discussion of the science behind current genetic engineering capabilities. US citizenship was not required for attendance. While this may have limited some discussions concerning risk, we felt that it was more important for this first workshop to focus on the scientific state of

  13. Communication Technologies for Vehicles

    DEFF Research Database (Denmark)

    Vinel, Alexey

    This book constitutes the proceedings of the 8th International Workshop on Communication Technologies for Vehicles, Nets4Cars/Nets4Trains/Nets4Aircraft 2015, held in Sousse, Tunisia, in May 2015. The 20 papers presented in this volume were carefully reviewed and selected from 27 submissions...

  14. Summary of the 1st International Workshop on Environmental, Safety and Economic Aspects of Fusion Power

    Science.gov (United States)

    Wu, Y.; Stevens, E.; Kim, K.; Maisonnier, D.; Kalashnikov, A.; Tobita, K.; Jackson, D.; Alejaldre, C.; Perrault, D.; Panayotov, D.; Merrill, B.; Grisolia, C.; Zucchetti, M.; Pinna, T.; van Houtte, D.; Konishi, S.; Kolbasov, B.

    2016-12-01

    The 1st International workshop on Environmental, Safety and Economic Aspects of Fusion Power (ESEFP) was held on 13 September 2015 at Jeju Island, South Korea. The workshop was initiated by the International Energy Agency Implementing Agreement on a Co-operative Program on ESEFP. The workshop was well attended with about forty participants representing twelve institutions in ten countries. The presentations covered safety issues and environmental impacts, availability improvement and risk control and socio-economic aspects of fusion power. Safety and licensing gaps between DEMO and ITER were discussed in depth with the consensus output presented as a plenary presentation at the 12th International Symposium on Fusion Nuclear Technology (ISFNT-12). The next workshop is planned to be held in conjunction with the ISFNT-13 in 2017.

  15. A Joint Meeting of the US-Korea Workshop on Nanostructured Materials and Nanomanufacturing (5th) and the US-Korea Workshop on Nanoelectronics (3rd). Held in Los Angeles, California on August 8-9, 2006

    Science.gov (United States)

    2007-09-10

    Materials Technology) Organizing Committee Dr. Byung-Lip Lee (Air Force Office of Scientific Research), Co-Chair Dr. Donald Silversmith (Air Force Office of...Materials Technology) Dr. Byung-Lip Lee (Air Force Office of Scientific Research, Aerospace & Materials Science Directorate) Dr. Donald Silversmith (Air...Force Research Lab), Moderator 10:20 Dr. Donald Silversmith (Air Force Office of Scientific Research) Opening Remark 10:30 Prof. Kang L. Wang (Univ. of

  16. Extended abstracts of the 12th JAERI workshop on high-Tc superconductors

    Energy Technology Data Exchange (ETDEWEB)

    Hojou, Kiichi; Okayasu, Satoru; Sasase, Masato [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Ishida, Takekazu [Osaka Prefectual Univ., Sakai (JP)] (eds.)

    2001-03-01

    This workshop was held on December 7-8, 2000 at JAERI (Tokai). The research group at JAERI shares a responsibility for material modification of high-Tc superconductors by irradiation in 'the multi-core project II of the high temperature superconducting material research' organized by STA (Science and Technology Agency) of Japan. This report contains the extended abstracts of workshop presentations covering basic theories, various experimental results and material improvement studies of the superconductivity by high energy ion irradiation. The twelve presentations of the workshop were devoted to a mini symposium where the direct observations of vortices were discussed in view of the various sophisticated techniques. (author)

  17. 75 FR 74736 - Food Labeling Workshop; Public Workshop

    Science.gov (United States)

    2010-12-01

    ... required due to disability, along with a check or money order for $250 payable to ``Iowa State University..., in collaboration with Iowa State University, is announcing a public workshop entitled ``Food Labeling... public workshop will be held at the Scheman Conference Center, Lincoln Way and University Avenue,...

  18. 77 FR 43237 - Genome in a Bottle Consortium-Work Plan Review Workshop

    Science.gov (United States)

    2012-07-24

    ... National Institute of Standards and Technology Genome in a Bottle Consortium--Work Plan Review Workshop.... SUMMARY: NIST announces the Genome in a Bottle Consortium meeting to be held on Thursday and Friday, August 16 and 17, 2012. The Genome in a Bottle Consortium is planning to develop the reference...

  19. 78 FR 47674 - Genome in a Bottle Consortium-Progress and Planning Workshop

    Science.gov (United States)

    2013-08-06

    ... National Institute of Standards and Technology Genome in a Bottle Consortium--Progress and Planning... workshop. SUMMARY: NIST announces the Genome in a Bottle Consortium meeting to be held on Thursday and Friday, August 15 and 16, 2013. The Genome in a Bottle Consortium is developing the reference...

  20. Advanced Wind Turbine Drivetrain Concepts: Workshop Report, June 29-30, 2010

    Energy Technology Data Exchange (ETDEWEB)

    DOE, EERE

    2010-12-01

    This report presents key findings from the Department of Energy's Advanced Drivetrain Workshop, held on June 29-30, 2010 in Broomfield, Colorado, to assess different advanced drivetrain technologies, their relative potential to improve the state-of-the-art in wind turbine drivetrains, and the scope of research and development needed for their commercialization in wind turbine applications.

  1. Nuclear Innovation Workshops Report

    Energy Technology Data Exchange (ETDEWEB)

    Jackson, John Howard [Idaho National Lab. (INL), Idaho Falls, ID (United States); Allen, Todd Randall [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hildebrandt, Philip Clay [Idaho National Lab. (INL), Idaho Falls, ID (United States); Baker, Suzanne Hobbs [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-09-01

    The Nuclear Innovation Workshops were held at six locations across the United States on March 3-5, 2015. The data collected during these workshops has been analyzed and sorted to bring out consistent themes toward enhancing innovation in nuclear energy. These themes include development of a test bed and demonstration platform, improved regulatory processes, improved communications, and increased public-private partnerships. This report contains a discussion of the workshops and resulting themes. Actionable steps are suggested at the end of the report. This revision has a small amount of the data in Appendix C removed in order to avoid potential confusion.

  2. Ocean margins workshop

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-12-31

    The Department of Energy (DOE) is announcing the refocusing of its marine research program to emphasize the study of ocean margins and their role in modulating, controlling, and driving Global Change phenomena. This is a proposal to conduct a workshop that will establish priorities and an implementation plan for a new research initiative by the Department of Energy on the ocean margins. The workshop will be attended by about 70 scientists who specialize in ocean margin research. The workshop will be held in the Norfolk, Virginia area in late June 1990.

  3. Proceedings of the Arctic Oceanography Conference and Workshop Held at the Naval Ocean Research and Development Activity, NSTL, MS on June 11-14, 1985

    Science.gov (United States)

    1985-01-01

    Yan, Geophysical Institute ^^ "AIWEX Field Operations Planning and Execution", Andreas Heilberg, Polar Science Center/Applied...of the ice-breaking ore carrier, M/V ARCTIC, between Little Cornwallis Island in the Canadian arctic archipelago and Europe [5]. Capabilities in...Technology Conference, Houston, Texas, May 6-9, 1985, pp. 399-408 (OTC ^1943). 49 AlWEX FIELD OPERATIONS PLANNING AND EXECUTION Andreas Heiberg

  4. Proceedings of the Workshop on Unsteady Separated Flow Held at the United States Air Force Academy on August 10-11, 1983

    Science.gov (United States)

    1984-05-01

    Colorado 80840 Technical Assistance Acknowledgements Michael C. Robinson Laurie Beeman Nancy Searby Randy Jones JoAnne 3utton Terri MacGregor...of Aeronautics & Astronautics Air Force Institute of Technology Wright-Patterson AFB, 0H 45433 (513) 255-2998 Dr. Donald A. Kennedy Aerospace...Lorrie Beeman and Nancy Searby for providing the photograph shown in Fig. V. References ’Fran-is, M.S., Keesee, J.E., lang, J.D., Sparks

  5. Mediterranean Workshop and Topical Meeting. "Novel Optical Materials and Applications" NOMA 󈧅 (5th) Held in Cetraro (Italy) on May 20-26, 2001

    Science.gov (United States)

    2002-09-12

    Physique , Universite J. Fournier, Grenoble I, B.P. 87, 38102 Saint Martin d’H~res c6dex, France (3)Physics Department, The Royal Institute of Technology...Stockholm 10044, Sweden (4) Laboratoire de Physique de la Matiere Condensee, Ecole Normale Superieure, 24 rue Lhomond, 75231 Paris cedex, France. (5...Zyss Laboratoire de Photonique Quantique et Mol6culaire (UMR CNRS 8537) Ecole Normale Sup~rieure de Cachan, France The field of molecular photonics is

  6. International Workshop on Condensed Matter Theories (14th), Held in Isola d’Elba, Italy on June 18-23, 1990

    Science.gov (United States)

    1990-06-23

    materials , namely superionic conductors, and on a diagrammatic perturbation-theo-y approach to the dielectric response of a broad class of composite... materials which include many examples of technological interest. Most of the talks in the two sessions on Thursday were concerned with various aspects of...8217 AFSENI INA PRIE1O C. F~5ID A.R. Universidad de Sala~anca Laboratorio de Fisica Cl.E Facultad de C. Fisicas Arlibertador 1513 (1638) 38008 SALAMANCA

  7. Proceedings of the Annual Space Surveillance Workshop (12th) Held in Lexington, Massachusetts on 5-7 April 1994. Volume 1

    Science.gov (United States)

    1994-04-07

    Klinkrad , H., ’Space Debris in Elliptical Orbits’, 18th Int. Symposium on Space Technology and Science, Kagoshima, Japan, 19-22 May 1992. 2. Kessler, D...8217History of On-Orbit Satellite Fragmentations’ 18. Gonzales-Laguna, E., and Klinkrad , H. H., ’FOCUS-1 Fast Orbit Computation Utility Software’, MAS WP 305...7, 1993. [2] Sdunnus, H., Klinkrad , H., An introduction to the ESA reference model for space debris and meteor- oids, First European Conference on

  8. Proceedings of the Workshop on 3-D Optical Memories (1st) Held in Snowbird, Utah on 12-13 March 1990.

    Science.gov (United States)

    1990-03-01

    issues addressed the possible utilizations of 3-D memories. It was suggested that in addition to their usage as secondary storage, 3-D memories could...SLMs operating at their thermal limit, precluding its usage for mass storage. On the other hand, the three dimensional magnetic bubble storage and...progress in solving these problems and have successfully stored and retreived 2-D data from optical disks Ŗ 5s 26. The availabilty of this technology

  9. Peer-Review Writing Workshops in College Courses: Students’ Perspectives about Online and Classroom Based Workshops

    OpenAIRE

    Erin B. Jensen

    2016-01-01

    Peer-review workshops are commonly used in writing courses as a way for students to give their peers feedback as well as help their own writing. Most of the research on peer-review workshops focuses on workshops held in traditional in-person courses, with less research on peer-review workshops held online. Students in a freshman writing course experienced both a classroom based writing workshop and an online workshop and then took a survey about their experiences. The majority of the students...

  10. Technology for NASA's Planetary Science Vision 2050.

    Science.gov (United States)

    Lakew, B.; Amato, D.; Freeman, A.; Falker, J.; Turtle, Elizabeth; Green, J.; Mackwell, S.; Daou, D.

    2017-01-01

    NASAs Planetary Science Division (PSD) initiated and sponsored a very successful community Workshop held from Feb. 27 to Mar. 1, 2017 at NASA Headquarters. The purpose of the Workshop was to develop a vision of planetary science research and exploration for the next three decades until 2050. This abstract summarizes some of the salient technology needs discussed during the three-day workshop and at a technology panel on the final day. It is not meant to be a final report on technology to achieve the science vision for 2050.

  11. IT Strategic Planning Workshops Develop Long-Term Goals | Poster

    Science.gov (United States)

    As part of NCI’s Research IT Strategic Planning efforts, a workshop was held on the NIH main campus in June. The main purpose of the workshop was to discuss ways to better integrate IT and informatics throughout NCI, and develop specific, high-level goals and related objectives that will drive the direction of IT and informatics support over the next five years. The initiative to integrate NCI’s IT and informatics is a collaboration between the Center for Biomedical Informatics and Information Technology (CBIIT), Office of Scientific Operations, Data Management Services, and the IT Operations Group.

  12. 3rd ENRI International Workshop on ATM/CNS

    CERN Document Server

    2014-01-01

    The Electronic Navigation Research Institute (ENRI) held its third International Workshop on ATM / CNS in 2013 with the theme of "Drafting the future sky". There is worldwide activity taking place in the research and development of modern air traffic management (ATM) and its enabling technologies in Communication, Navigation and Surveillance (CNS). Pioneering work is necessary to contribute to the global harmonization of air traffic management and control. At this workshop, leading experts in  research, industry and academia from around the world met to share their ideas and approaches on ATM/CNS related topics.

  13. IT Strategic Planning Workshops Develop Long-Term Goals | Poster

    Science.gov (United States)

    As part of NCI’s Research IT Strategic Planning efforts, a workshop was held on the NIH main campus in June. The main purpose of the workshop was to discuss ways to better integrate IT and informatics throughout NCI, and develop specific, high-level goals and related objectives that will drive the direction of IT and informatics support over the next five years. The initiative to integrate NCI’s IT and informatics is a collaboration between the Center for Biomedical Informatics and Information Technology (CBIIT), Office of Scientific Operations, Data Management Services, and the IT Operations Group.

  14. The Tribute Workshop in Honour of Gunnar Sparr

    CERN Document Server

    Astrom, Karl; Silvestrov, Sergei D; Analysis for Science, Engineering and Beyond

    2012-01-01

    This book project was initiated at The Tribute Workshop in Honour of Gunnar Sparr and the follow-up workshop Inequalities, Interpolation, Non-commutative, Analysis, Non-commutative Geometry and Applications INANGA08, held at the Centre for Mathematical Sciences, Lund University in May and November of 2008. The resulting book is dedicated in celebration of Gunnar Sparr's sixty-fifth anniversary and more than forty years of exceptional service to mathematics and its applications in engineering and technology, mathematics and engineering education, as well as interdisciplinary, industrial and int

  15. Report from the DCC Workshop: Legal Environment of Digital Curation

    Directory of Open Access Journals (Sweden)

    Angus Whyte

    2007-12-01

    Full Text Available This is a report from the Legal Environment of Digital Curation workshop held at Glasgow University on November 23, 2007. The event provided an overview of legal considerations for non-legal professionals who work with data, focusing especially on intellectual property rights and licensing, data protection, freedom of information and privacy, and data as evidence. The workshop was organised in conjunction with the SCRIPT-ed journal of law and technology, and supported by JISC, the AHRC and Edinburgh University.

  16. New pathways to medicare coverage for innovative PET radiopharmaceuticals: report of a medical imaging & technology alliance (MITA) workshop.

    Science.gov (United States)

    Hillman, Bruce J; Frank, Richard A; Rodriguez, Gail M

    2012-02-01

    PET and PET/CT have revolutionized the diagnosis, staging, and monitoring of treatment effect or recurrence for a wide range of cancers and shown promise for improving health outcomes for patients with cardiovascular and central nervous system diseases. However, this technology is challenged by insurance coverage policies that hinder patients' access to PET and discourage technologic innovation. Recently, the Medical Imaging & Technology Alliance (MITA), a Washington-based industry association, convened a workshop to consider new pathways for making decisions on Medicare coverage of new PET radiopharmaceuticals and imaging procedures that are currently subject to a national noncoverage decision, or "exclusionary rule." Stakeholders from the government, medical professional societies, academia, patient groups, and industry gathered to brainstorm alternatives to the national noncoverage decision and evaluate their potential to improve access and enhance innovation. Ultimately, MITA, on behalf of the PET community, expects to use the outcomes of the workshop to propose that the Centers for Medicare and Medicaid Services reconsider this current national noncoverage decision for PET and adopt a new framework for coverage.

  17. What's the Technology For? Teacher Attention and Pedagogical Goals in a Modeling-Focused Professional Development Workshop

    Science.gov (United States)

    Wilkerson, Michelle Hoda; Andrews, Chelsea; Shaban, Yara; Laina, Vasiliki; Gravel, Brian E.

    2016-02-01

    This paper explores the role that technology can play in engaging pre-service teachers with the iterative, "messy" nature of model-based inquiry. Over the course of 5 weeks, 11 pre-service teachers worked in groups to construct models of diffusion using a computational animation and simulation toolkit, and designed lesson plans for the toolkit. Content analyses of group discussions and lesson plans document attention to content, representation, revision, and evaluation as interwoven aspects of modeling over the course of the workshop. When animating, only content and representation were heavily represented in group discussions. When simulating, all four aspects were represented to different extents across groups. Those differences corresponded with different planned uses for the technology during lessons: to teach modeling, to engage learners with one another's ideas, or to reveal student ideas. We identify specific ways in which technology served an important role in eliciting teachers' knowledge and goals related to scientific modeling in the classroom.

  18. 76 FR 34215 - Notice of Department of Energy-Quadrennial Technology Review Capstone Workshop

    Science.gov (United States)

    2011-06-13

    ... Meeting: The DOE-QTR Capstone Workshop will provide the public an opportunity to offer feedback on the... research & development portfolio, the composition of activities within that portfolio, and approaches to... four ninety minute panels: (1) the Department's mobile portfolio; (2) the Department's...

  19. Department of Defense Science, Technology, Engineering, and Mathematics (STEM) Education Workshop on Computing Education

    Science.gov (United States)

    2010-10-18

    School Cybercampus ChicTech Tech Ambassadors Competition Arduino Project Lead the Way Pico Crickets™ Workshops MIT Media Lab , STEM Rays, UMASS...Computer Science Equity Alliance Way Arduino “Kids Ahead” SMU Caruth August 2010 14 , STEM Rays, UMASS US FIRST Robotics Competition Autonomous

  20. US Department of Energy workshop on future fuel technology for heavy vehicles

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    The objective of the workshop described in this report was to develop consensus on a program strategy for use of alternative fuels in heavy vehicles. Participants represented fuel providers, additive suppliers, the trucking industry, engine manufacturers, and government or national laboratory staff. Breakout sessions were co-facilitated by national laboratory staff and industry representatives.

  1. National Educators' Workshop: Update 95. Standard Experiments in Engineering Materials Science and Technology

    Science.gov (United States)

    Gardner, James E. (Compiler); Jacobs, James A.; Karnitz, Michael A.

    1996-01-01

    This document contains a collection of experiments presented and demonstrated at the National Educators' Workshop: Update 95. The experiments related to the nature and properties of engineering materials and provided information to assist in teaching about materials in the education community.

  2. Beta Cell Workshop 2013 Kyoto

    DEFF Research Database (Denmark)

    Heller, R Scott; Madsen, Ole D; Nielsen, Jens Høiriis

    2013-01-01

    The very modern Kyoto International Conference Center provided the site for the 8th workshop on Beta cells on April 23-26, 2013. The preceding workshops were held in Boston, USA (1991); Kyoto, Japan (1994); Helsingør, Denmark (1997); Helsinki, Finland (2003); El Perello, Spain (2006); Peebles...

  3. Presentation Skills Workshops for Nurses.

    Science.gov (United States)

    Kinn, S.; Kenyon, M.

    2002-01-01

    Workshops were held to prepare nurses (n=87) to present results of professional activities. One year after the course, 20 had made oral and 30 written presentations. The workshops increased their confidence and were considered practical, informal, and nonthreatening. (Contains 31 references.) (SK)

  4. International Workshop on Beam Injection Assessment of Defects in Semiconductors Held in Meudon-Bellevue (France) on 18-20 July 1988

    Science.gov (United States)

    1989-07-20

    Research Office of the U.S.Army Commissariat A l’Energie Atornique - Leti Laboratoire d’’ Electronique et de Physique Appliqu~e Thomson - Laboratoire...imperial College of Science and Technology. LONDON SW7 2BP Abstract - Scanning elect-Dn microscope (SE.M) EBIC (electron beam induced current) and CL...Bologna, Via ’rnerio 46, Bologna ITALY A.Poggi. E.Susi CNR-LAMEL Institute, Via Castagnoll I, Bologna ITALY ABSTRACT Microscopic inhomogeneities in the

  5. Report of the Workshop on Biology-Based Technology to Enhance Human Well-Being and Function in Extended Space Exploration

    National Research Council Canada - National Science Library

    Steering Group for the Workshop on Biology-based Technology for Enhanced Space Exploration

    1998-01-01

    ... on Biology-based Technology to Enhance Human Well-being and Function in Extended Space Exploration Steering Group for the Workshop on Biology-based Technology for Enhanced Space Exploration Space Studies Board Commission on Physical Sciences, Mathematics, and Applications National Research Council NATIONAL ACADEMY PRESS Washington D.C. 1998 i Copyrighttr...

  6. Information Technologies in Teacher Education. Issues and Experiences for Countries in Transition. Proceedings of a European Workshop, University of Twente (Enschede, Netherlands, February 20-23, 1994).

    Science.gov (United States)

    Collis, Betty, Ed.; And Others

    This document contains 21 papers from an international workshop designed to facilitate the exchange of ideas concerning the use of information technology in teacher education among experts from Central, Eastern, and Western Europe. The papers include: (1) "Communication and Information Technologies as Change Agents" (Jef Moonen); (2)…

  7. 17th international free electron laser conference and 2nd international FEL users` workshop. Program and abstracts

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    This workshop and conference were held together to enhance the interaction between FEL builders and users. Current topics of interest in FEL research form the basis for the oral presentations. The program for the User`s workshop was developed in a similar manner. Storage rings, linear accelerators, materials research and applications are all considered topics. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  8. European Workshop on Renewable Rural Energy Applications in North-East Europe

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    This workshop is a part of the E.C. Thermie B project `Dissemination of Promising Renewable Rural Energy Applications in North-Eastern Europe`. The presentations held in the workshop are collected in this publication. The subjects are: TEKES (Technology Development Centre) Boost Technology; Renewable Energy in Latvia; Rural Renewable energy (Prospects) in Estonia; Renewable energy from Rural Electrification; Techno-Economic Analysis published as a summary; Practical Experiences of Small-Scale Heat Generation from Fuelwood in Finland; Solar systems for Domestic Hot Water and Space Heating; Biomass for Energy: Small-Scale Technologies; Photovoltaic Applications for Rural Areas in the North-East Europe

  9. First NASA Workshop on Wiring for Space Applications

    Science.gov (United States)

    Hammond, Ahmad (Compiler); Stavnes, Mark W. (Compiler)

    1994-01-01

    This document contains the proceedings of the First NASA Workshop on Wiring for Space Applications held at NASA Lewis Research Center in Cleveland, OH, July 23-24, 1991. The workshop was sponsored by NASA Headquarters Code QE Office of Safety and Mission Quality, Technical Standards Division and hosted by the NASA Lewis Research Center, Power Technology Division, Electrical Components and Systems Branch. The workshop addressed key technology issues in the field of electrical power wiring for space applications. Speakers from government, industry and academia presented and discussed topics on arc tracking phenomena, wiring applications and requirements, and new candidate insulation materials and constructions. Presentation materials provided by the various speakers are included in this document.

  10. Outcomes of the 2013 GTO Workshop on Geothermal Code Comparison

    Energy Technology Data Exchange (ETDEWEB)

    Scheibe, Timothy D.; White, Mark D.; White, Signe K.

    2013-03-01

    Pacific Northwest National Laboratory (PNNL) is supporting the Department of Energy (DOE) Geothermal Technologies Office (GTO) in organizing and executing a model comparison activity. This project is directed at testing, diagnosing differences, and demonstrating modeling capabilities of a worldwide collection of numerical simulators for evaluating geothermal technologies. A key element of the projct was the planning and implementation of a one-day project kickoff workshop, held February 14, 2013 in Palo Alto, CA. The primary goals of the workshop were to 1) introduce the project and its objectives to potential participating team members, and 2) develop an initial set of test problem descriptions for use in the execution stage. This report summarizes the outcomes of the workshop.

  11. Proceedings of the 1. international workshop on performance protection, and strengthening of structures under extreme loading

    Energy Technology Data Exchange (ETDEWEB)

    Banthia, N.; Mindess, S. [British Columbia Univ., Vancouver, BC (Canada); Fujikake, K. [National Defense Academy, Hashirimizu (Japan)] (eds.)

    2007-07-01

    This workshop was held to bring together experts from diverse engineering backgrounds to discuss recent developments in the performance, protection, and strengthening of structures exposed to extreme events. The aim of the workshop was to create a multidisciplinary forum to enhance the understanding of complex issues related to structures under extreme loading. Papers presented at the workshop examined designs and collapse mechanisms, and explored cost-effective strengthening and protection measures. Innovative and effective strategies related to civil engineering and project management were discussed along with new technologies and construction materials. New approaches to computer modelling were also discussed. The structural performance of measuring tools were also reviewed. The workshop was divided into the following 4 themes: (1) structures under impact and shock; (2) structures under blast and fire; (3) structures under seismic loads and vibrations; and (4) structural performance and strengthening. The workshop featured 108 presentations, of which 5 have been catalogued separately for inclusion in this database. refs., tabs., figs.

  12. Overview and Summary of the Second AIAA High Lift Prediction Workshop

    Science.gov (United States)

    Rumsey, Christopher L.; Slotnick, Jeffrey P.

    2014-01-01

    The second AIAA CFD High-Lift Prediction Workshop was held in San Diego, California, in June 2013. The goals of the workshop continued in the tradition of the first high-lift workshop: to assess the numerical prediction capability of current-generation computational fluid dynamics (CFD) technology for swept, medium/high-aspect-ratio wings in landing/takeoff (high-lift) configurations. This workshop analyzed the flow over the DLR-F11 model in landing configuration at two different Reynolds numbers. Twenty-six participants submitted a total of 48 data sets of CFD results. A variety of grid systems (both structured and unstructured) were used. Trends due to grid density and Reynolds number were analyzed, and effects of support brackets were also included. This paper analyzes the combined results from all workshop participants. Comparisons with experimental data are made. A statistical summary of the CFD results is also included.

  13. ENSIS YANTAI. Workshop Report 25-29 November 1996

    Energy Technology Data Exchange (ETDEWEB)

    Boehler, T.; Zhang, P.L.

    1997-12-31

    NILU (Norwegian Institute for Air Research) carries out a project for Yantai Municipal Science and Technology Commission, China, regarding installation of an Environmental Surveillance and Information System (ENSIS). This system consists of modules for air and water monitoring and management. The project started in November 1996 and will last for three years. This report summarizes the start-up workshop held in November 1996. 17 figs., 14 tabs.

  14. 15th International Workshop on Radiation Imaging Detectors

    CERN Document Server

    2013-01-01

    The International Workshops on Radiation Imaging Detectors are held yearly and provide an international forum for discussing current research and developments in the area of position sensitive detectors for radiation imaging, including semiconductor detectors, gas- and scintillator-based detectors. Topics include processing and characterization of detector materials, hybridization and interconnect technologies, design of counting or integrating electronics, readout and data acquisition systems, and applications in various scientific and industrial fields.

  15. Proceedings from the Workshop on Phytoremediation of Inorganic Contaminants

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Jay Thatcher; Matthern, Gretchen Elise; Glenn, Anne Williams; Kauffman, J.; Rock, S.; Kuperberg, M.; Ainsworkth, C.; Waugh, J.

    2000-02-01

    The Metals and Radionuclides Product Line of the U.S. Department of Energy (DOE) Subsurface Contaminants Focus Area (SCFA) is responsible for the development of technologies and systems that reduce the risk and cost of remediation of radionuclide and hazardous metal contamination in soils and groundwater. The rapid and efficient remediation of these sites and the areas surrounding them represents a technological challenge. Phytoremediation, the use of living plants to cleanup contaminated soils, sediments, surface water and groundwater, is an emerging technology that may be applicable to the problem. The use of phytoremediation to cleanup organic contamination is widely accepted and is being implemented at numerous sites. This workshop was held to initiate a discussion in the scientific community about whether phytoremediation is applicable to inorganic contaminants, such as metals and radionuclides, across the DOE complex. The Workshop on Phytoremediation of Inorganic Contaminants was held at Argonne National Laboratory from November 30 through December 2, 1999. The purpose of the workshop was to provide SCFA and the DOE Environmental Restoration Program with an understanding of the status of phytoremediation as a potential remediation technology for DOE sites. The workshop was expected to identify data gaps, technologies ready for demonstration and deployment, and to provide a set of recommendations for the further development of these technologies. More specifically, the objectives of the workshop were to: · Determine the status of the existing baseline, including technological maturation, · Identify areas for future potential research, · Identify the key issues and recommendations for issue resolution, · Recommend a strategy for maturing key aspects of phytoremediation, · Improve communication and collaboration among organizations currently involved in phytoremediation research, and · Identify technical barriers to making phytoremediation commercially

  16. Eleventh workshop on geothermal reservoir engineering: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Counsil, J.R. (Stanford Geothermal Program)

    1986-01-23

    The Eleventh Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 21-23, 1986. The attendance was up compared to previous years, with 144 registered participants. Ten foreign countries were represented: Canada, England, France, Iceland, Indonesia, Italy, Japan, Mexico, New Zealand and Turkey. There were 38 technical presentations at the Workshop which are published as papers in this Proceedings volume. Six technical papers not presented at the Workshop are also published and one presentation is not published. In addition to these 45 technical presentations or papers, the introductory address was given by J. E. Mock from the Department of Energy. The Workshop Banquet speaker was Jim Combs of Geothermal Resources International, Inc. We thank him for his presentation on GEO geothermal developments at The Geysers. The chairmen of the technical sessions made an important contribution to the Workshop. Other than Stanford faculty members they included: M. Gulati, E. Iglesias, A. Moench, S. Prestwich, and K. Pruess. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and students. We would like to thank J.W. Cook, J.R. Hartford, M.C. King, A.E. Osugi, P. Pettit, J. Arroyo, J. Thorne, and T.A. Ramey for their valued help with the meeting arrangements and preparing the Proceedings. We also owe great thanks to our students who arranged and operated the audio-visual equipment. The Eleventh Workshop was supported by the Geothermal Technology Division of the U.S. Department of Energy through Contract DE-AS03-80SF11459. We deeply appreciate this continued support. January 1986 H.J. Ramey, Jr. P. Kruger R.N. Horne W.E. Brigham F.G. Miller J.R. Counsil

  17. Summary of the PSI workshop

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-03-01

    The PSI workshop had been held at JAERI-Naka, from March 15th to 16th, 2002. This workshop is held twice a year as the skull practice session to report the recent progress on the plasma - surface interactions of the experimental reactors such as ITER, JT-60, LHD, etc. and the development of the plasma facing components. There were 34 participants from the university and 18 participants from JAERI and 26 papers were presented. This booklet was published for the purpose of saving a record of this workshop performed in oral lecture form. (author)

  18. Fostering reflective practice with mobile technologies

    NARCIS (Netherlands)

    Tabuenca, Bernardo; Verpoorten, Dominique; Stefaan, Ternier; Westera, Wim; Specht, Marcus

    2012-01-01

    Tabuenca, B., Verpoorten, D., Stefaan, T., Westera, W., & Specht, M. (2012, September). Fostering reflective practice with mobile technologies. Presentation held at the 2nd Workshop on Awareness and Reflection in Technology-Enhanced Learning (ARTEL)/EC-TEL 2012, Saarbrücken, Germany.

  19. 47{sup th} Annual meeting on nuclear technology (AMNT 2016). Key Topic / Outstanding know-how and sustainable excellence. Workshop: Preserving competence in nuclear technology

    Energy Technology Data Exchange (ETDEWEB)

    Steinwarz, Wolfgang

    2016-10-15

    On the 18{sup th} workshop Preserving Competence in Nuclear Technology 24 young scientists presented the scientific results from their work covering a broad spectrum of technical areas. This demonstrated again the strong engagement of the younger generation as part of the German nuclear society. Prof.Dr.-Ing. Eckart Laurin, Prof.Dr.-Ing. Marco K. Koch, Dr. Katharina Stummeyer, and Dr.-Ing. Wolfgang Steinwarz as members of the jury assessed the written compacts and the oral presentations to award the Siempelkamp Competence Price 2016 to Andreas Wanninger from Technische Universitaet Muenchen.

  20. Second Quaternary dating workshop

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-11-01

    The second Quaternary dating methods workshop was held at Lucas Heights and sponsored by ANSTO and AINSE. Topics covered include, isotope and thermoluminescence dating, usage of accelerator and thermal ionisation mass spectrometry in environmental studies emphasizing on the methodologies used and sample preparation

  1. FINPIE/97. Workshop proceedings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    This publication contains the proceedings of 1997 Finnish Workshop on Power and Industrial Electronics, held in Espoo, Finland, on 26 August, 1997. The programme consisted of technical sessions on Advanced AC Motor Control, Electric Machines and Drives, Advanced Control and Measurement, Power Electronics Systems, Modelling and Simulation, and Power Converters

  2. Workshop on Mathematical Physics

    CERN Document Server

    2016-01-01

    This two-day workshop will include seminars by mathematicians and physicists on topics of mutual interest. It will precede the 31st International Colloquium on Group Theoretical Methods in Physics which will be held in Rio de Janeiro from June 19-25.

  3. Workshop on hybrid rice

    Institute of Scientific and Technical Information of China (English)

    TANZhijun

    1994-01-01

    FAO, in collaboration with FEDEARROZ in Colombia and EMBRAPA / CNPAF in Brail, organized a workshop on the Establishment of a Coorperative Research Network on Hybrid Rice in Latin America and the Caribbean held from Mar 16 to 18, 1994 at EMBRAPA/CNPAF in Brazil. Dr MAO Changxiang,

  4. Workshop on DNA repair.

    NARCIS (Netherlands)

    A.R. Lehmann (Alan); J.H.J. Hoeijmakers (Jan); A.A. van Zeeland (Albert); C.M.P. Backendorf (Claude); B.A. Bridges; A. Collins; R.P.D. Fuchs; G.P. Margison; R. Montesano; E. Moustacchi; A.T. Natarajan; M. Radman; A. Sarasin; E. Seeberg; C.A. Smith; M. Stefanini (Miria); L.H. Thompson; G.P. van der Schans; C.A. Weber (Christine); M.Z. Zdzienika

    1992-01-01

    textabstractA workshop on DNA repair with emphasis on eukaryotic systems was held, under the auspices of the EC Concerted Action on DNA Repair and Cancer, at Noordwijkerhout (The Netherlands) 14-19 April 1991. The local organization of the meeting was done under the auspices of the Medical Genetic C

  5. Human genetics for non-scientists: Practical workshops for policy makers and opinion leaders

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    These workshops form part of a series of workshops that the Banbury and the DNA Learning Centers of Cold Spring Harbor Laboratory have held for a number of years, introducing genetics, and the ways in which scientific research is done, to non-scientists. The purpose of the workshops as stated in the grant application was: {open_quotes}Our objective is to foster a better understanding of the societal impact of human genome research by providing basic information on genetics to non-scientists whose professions or special interests interface with genetic technology.... Participants will be chosen for their interest in human genetics and for their roles as opinion leaders in their own communities. Primary care physicians are of particular interest to us for this series of workshops.{close_quotes} Two workshops were held under this grant. The first was held in 21-24 April, 1994 and attended by 20 participants, and the second was held 16-19 November, 1995, and attended by 16 participants. In each case, there was a combination of concept lectures on the foundations of human molecular genetics; lectures by invited specialists; and laboratory experiments to introduce non-scientists to the techniques used in molecular genetics.

  6. MICCAI Workshops

    CERN Document Server

    Nedjati-Gilani, Gemma; Venkataraman, Archana; O'Donnell, Lauren; Panagiotaki, Eleftheria

    2014-01-01

    This volume contains the proceedings from two closely related workshops: Computational Diffusion MRI (CDMRI’13) and Mathematical Methods from Brain Connectivity (MMBC’13), held under the auspices of the 16th International Conference on Medical Image Computing and Computer Assisted Intervention, which took place in Nagoya, Japan, September 2013. Inside, readers will find contributions ranging from mathematical foundations and novel methods for the validation of inferring large-scale connectivity from neuroimaging data to the statistical analysis of the data, accelerated methods for data acquisition, and the most recent developments on mathematical diffusion modeling. This volume offers a valuable starting point for anyone interested in learning computational diffusion MRI and mathematical methods for brain connectivity as well as offers new perspectives and insights on current research challenges for those currently in the field. It will be of interest to researchers and practitioners in computer science, ...

  7. HTS Wire Development Workshop: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    1994-07-01

    The 1994 High-Temperature Superconducting Wire Development Workshop was held on February 16--17 at the St. Petersburg Hilton and Towers in St. Petersburg, Florida. The meeting was hosted by Florida Power Corporation and sponsored by the US Department of Energy`s Superconductivity Program for Electric Power Systems. The meeting focused on recent high-temperature superconducting wire development activities in the Department of Energy`s Superconductivity Systems program. The meeting opened with a general discussion on the needs and benefits of superconductivity from a utility perspective, the US global competitiveness position, and an outlook on the overall prospects of wire development. The meeting then focused on four important technology areas: Wire characterization: issues and needs; technology for overcoming barriers: weak links and flux pinning; manufacturing issues for long wire lengths; and physical properties of HTS coils. Following in-depth presentations, working groups were formed in each technology area to discuss the most important current research and development issues. The working groups identified research areas that have the potential for greatly enhancing the wire development effort. These areas are discussed in the summary reports from each of the working groups. This document is a compilation of the workshop proceedings including all general session presentations and summary reports from the working groups.

  8. QCD Evolution Workshop

    CERN Document Server

    2015-01-01

    These are the proceedings of the QCD Evolution 2015 Workshop which was held 26–30 May, 2015 at Jefferson Lab, Newport News, Virginia, USA. The workshop is a continuation of a series of workshops held during four consecutive years 2011, 2012, 2013 at Jefferson Lab, and in 2014 in Santa Fe, NM. With the rapid developments in our understanding of the evolution of parton distributions including low-x, TMDs, GPDs, higher-twist correlation functions, and the associated progress in perturbative QCD, lattice QCD and effective field theory techniques we look forward with great enthusiasm to the 2015 meeting. A special attention was also paid to participation of experimentalists as the topics discussed are of immediate importance for the JLab 12 experimental program and a future Electron Ion Collider.

  9. Special Workshop of Marie Curie Fellows on Research and Training in Physics and Technology

    CERN Multimedia

    Patrice Loiez

    2002-01-01

    Photo 0210006_07a: Prof. L. Maiani, Director General of CERN. Addressing the Marie Curie Worshop held at CERN 3-4 October 2002. Title of this talk:"Function of Large-scale Facilities and Centres of Excellence". Photo 0210006_14a: Prof. L. Maiani, Director General of CERN. Addressing the Marie Curie Worshop held at CERN 3-4 October 2002. Title of this talk:"Function of Large-scale Facilities and Centres of Excellence". Photo 0210006_22: Dr. David Plane (CERN) introducing Dr. Theodore Papazoglou from the European Commission. Addressing the Marie Curie Worshop held at CERN 3-4 October 2002. Title of this talk:"Marie Curie Fellowships in the 6th Framework Programme". Photo 0210006_28a: Dr. Nora Brambilla, Vice-President of Marie Curie Fellow Association, INFN and Dept. of Physics, University of Milan. Addressing the Marie-Curie Worshop held at CERN 3-4 October 2002. Title of this talk:"Marie Curie Fellows Association". Photo 0210006_29a: Dr. Nora Brambilla, Vice-President of Marie Curie Fellow Association, INFN a...

  10. Workshop for Exploiting Commercial Games and Technology for Military Use (7th)

    Science.gov (United States)

    2009-06-01

    applications • ESP: UAV Training using PRST – fly a virtual UAV in ESP and then unplug and plug-in real UAV (no re-learning of different hand-held controls...civilians are fairly ‘dumb’ – reacting unrealistically to being shot at (but not actually shot), bomb-blasts and explosions, etc. Teaching staff at the

  11. 75 FR 28051 - Public Workshop: Pieces of Privacy

    Science.gov (United States)

    2010-05-19

    ... SECURITY Office of the Secretary Public Workshop: Pieces of Privacy AGENCY: Privacy Office, DHS. ACTION: Notice announcing public workshop. SUMMARY: The Department of Homeland Security Privacy Office will host a public workshop, ``Pieces of Privacy.'' DATES: The workshop will be held on June 10, 2010, from 8...

  12. It participates in 'international workshop on the concrete technology for sustainable development in the twenty-first century'; '21 seiki ni okeru jizokuteki hatten no tameno konkurito gijutsu ni kansuru kokusai waku shoppu' ni sankashite

    Energy Technology Data Exchange (ETDEWEB)

    Noguchi, Takafumi; Ishida, Tetsuya [The University of Tokyo, Tokyo (Japan)

    1998-10-10

    International workshop on the concrete technology for sustainable development in the twenty-first century' was held in Norway. From the viewpoint of the durability by corrosion of steel, present state and problem and future direction to be aimed of design the Grorv professor mainly show system of the RC structure. Here, the construction of the estimable frame was emphasized in the life cycle including the maintenance repair. And, the lecture on concept of the performance evaluation die design system and concrete content of the integrated design was made from the Sakai professor as future flow of the design code of reinforced concrete structure in our country and world. (NEDO)

  13. Proceedings of a Symposium on the Physics and Technology of Amorphous SiO2 Held in Les Arcs, France on 29 June-3 July 1987

    Science.gov (United States)

    1987-07-03

    Physics and Technology of Amorphous SiO , held June 29-July 3, 1987, in Les Arcs, France"-T.p. verso . Includes bibliographical references and indexes. ISBN...practically unchanged. while that for the amor - 98 10’s phous shows a blue shift. 10 2.0x 16’s SI I _ - 2 3 4 PHOTON ENERGY (eV) 6 Fig. 3 Decay of the

  14. Proceedings of spent fuel management technology workshop, 1997. 11. 13 - 11. 14, Taejon, Korea

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    This proceedings cover the advanced spent fuel process technology, the development of a test facility for spent fuel management and remote handling technology, and the characteristics test technology. Fifteen papers are submitted.

  15. Reports of the AAAI 2010 Conference Workshops

    OpenAIRE

    2010-01-01

    The AAAI-10 Workshop program was held Sunday and Monday, July 11–12, 2010 at the Westin Peachtree Plaza in Atlanta, Georgia. The AAAI-10 workshop program included 13 workshops covering a wide range of topics in artificial intelligence. The titles of the workshops were AI and Fun, Bridging the Gap between Task and Motion Planning, Collaboratively-Built Knowledge Sources and Artificial Intelligence, Goal-Directed Autonomy, Intelligent Security, Interactive Decision Theory and Game Theory,...

  16. 8th International Workshop on Natural Computing

    CERN Document Server

    Hagiya, Masami

    2016-01-01

    This book highlights recent advances in natural computing, including biology and its theory, bio-inspired computing, computational aesthetics, computational models and theories, computing with natural media, philosophy of natural computing, and educational technology. It presents extended versions of the best papers selected from the “8th International Workshop on Natural Computing” (IWNC8), a symposium held in Hiroshima, Japan, in 2014. The target audience is not limited to researchers working in natural computing but also includes those active in biological engineering, fine/media art design, aesthetics, and philosophy.

  17. 7th International Workshop on Natural Computing

    CERN Document Server

    Hagiya, Masami

    2015-01-01

    This book highlights recent advances in natural computing, including biology and its theory, bio-inspired computing, computational aesthetics, computational models and theories, computing with natural media, philosophy of natural computing and educational technology. It presents extended versions of the best papers selected from the symposium “7th International Workshop on Natural Computing” (IWNC7), held in Tokyo, Japan, in 2013. The target audience is not limited to researchers working in natural computing but also those active in biological engineering, fine/media art design, aesthetics and philosophy.

  18. Proceedings of the Airframe Icing Workshop

    Science.gov (United States)

    Colantonio, Ron O. (Editor)

    2009-01-01

    The NASA Glenn Research Center (GRC) has a long history of working with its partners towards the understanding of ice accretion formation and its associated degradation of aerodynamic performance. The June 9, 2009, Airframe Icing Workshop held at GRC provided an opportunity to examine the current NASA airframe icing research program and to dialogue on remaining and emerging airframe icing issues and research with the external community. Some of the airframe icing gaps identified included, but are not limited to, ice accretion simulation enhancements, three-dimensional benchmark icing database development, three-dimensional iced aerodynamics modeling, and technology development for a smart icing system.

  19. Canada Goose Production Workshop draft proceedings : May 1971

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Summary and review of the Canada Goose Production Workshop held in Jamestown, North Dakota on May 4th, 5th, and 6th, 1971. This workshop provided sessions about...

  20. Proceedings of the 1993 Complex Systems Engineering Synthesis and Assessment Technology Workshop (CSESAW 󈨡)

    Science.gov (United States)

    1993-10-17

    England, August 28-30), IEEE, Piscat - tion Model Specification Language," (in prepara- away, New Jersey, pp. 386-391. tion). Beane, J, N. Giddings and... Piscat - CON 1989 (Dayton, Ohio, May 22-26),, Piscat - away, NJ, pp. 305-311. away, NJ, pp. 500-507. Bryan, W.L. and S.G. Siegel (1984), "Product As- Far...Symposium Third International Workshop on Software Spec- (Gaithersburg, MD, Dec. 12-14), IEEE, Piscat - ification and Design (London, England, August away

  1. Thirteenth workshop on geothermal reservoir engineering: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Ramey, H.J. Jr.; Kruger, P.; Horne, R.N.; Brigham, W.E.; Miller, F.G.; Cook, J.W. (Stanford Geothermal Program)

    1988-01-21

    PREFACE The Thirteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 19-21, 1988. Although 1987 continued to be difficult for the domestic geothermal industry, world-wide activities continued to expand. Two invited presentations on mature geothermal systems were a keynote of the meeting. Malcolm Grant presented a detailed review of Wairakei, New Zealand and highlighted plans for new development. G. Neri summarized experience on flow rate decline and well test analysis in Larderello, Italy. Attendance continued to be high with 128 registered participants. Eight foreign countries were represented: England, France, Iceland, Italy, New Zealand, Japan, Mexico and The Philippines. A discussion of future workshops produced a strong recommendation that the Stanford Workshop program continue for the future. There were forty-one technical presentations at the Workshop. All of these are published as papers in this Proceedings volume. Four technical papers not presented at the Workshop are also published. In addition to these forty five technical presentations or papers, the introductory address was given by Henry J. Ramey, Jr. from the Stanford Geothermal Program. The Workshop Banquet speaker was Gustavo Calderon from the Inter-American Development Bank. We thank him for sharing with the Workshop participants a description of the Bank???s operations in Costa Rica developing alternative energy resources, specifically Geothermal, to improve the country???s economic basis. His talk appears as a paper in the back of this volume. The chairmen of the technical sessions made an important contribution to the workshop. Other than Stanford faculty members they included: J. Combs, G. T. Cole, J. Counsil, A. Drenick, H. Dykstra, K. Goyal, P. Muffler, K. Pruess, and S. K. Sanyal. The Workshop was organized by the Stanford Geothermal Program faculty, staff and students. We would like to thank Marilyn King, Pat Oto, Terri Ramey, Bronwyn Jones

  2. 11th International Workshop on Railway Noise

    CERN Document Server

    Anderson, David; Gautier, Pierre-Etienne; Iida, Masanobu; Nelson, James; Thompson, David; Tielkes, Thorsten; Towers, David; Vos, Paul

    2015-01-01

    The book reports on the 11th International Workshop on Railway Noise, held on 9 – 13 September, 2013, in Uddevalla, Sweden. The event, which was jointly organized by the Competence Centre Chalmers Railway Mechanics (CHARMEC) and the Departments of Applied Mechanics and Applied Acoustics at Chalmers University of Technology in Gothenburg, Sweden, covered a broad range of topics in the field of railway noise and vibration, including: prospects, legal regulations and perceptions; wheel and rail noise; prediction, measurements and monitoring; ground-borne vibration; squeal noise and structure-borne noise; and aerodynamic noise generated by high-speed trains. Further topics included: resilient track forms; grinding, corrugation and roughness; and interior noise and sound barriers. This book, which consists of a collection of peer-reviewed papers originally submitted to the workshop, not only provides readers with an overview of the latest developments in the field, but also offers scientists and engineers essent...

  3. Livestock waste treatment systems of the future: A challenge to environmental quality, food safety, and sustainability. OECD Workshop

    Science.gov (United States)

    This Special Issue of Bioresource Technology is dedicated to selected contributions presented at the international Workshop: “Livestock waste treatment systems of the future: A challenge to environmental quality, food safety, and sustainability,” held 2-4 April, 2008, in Florence, South Carolina (US...

  4. Applications of Phase Diagrams in Metallurgy and Ceramics: Proceedings of a Workshop Held at the National Bureau of Standards, Gaithersburg, Maryland, January 10-12, 1977. Volumes 1 [and] 2.

    Science.gov (United States)

    Carter, G. C., Ed.

    This document is a special National Bureau of Standards publication on a Workshop on Applications of Phase Diagrams in Metallurgy and Ceramics. The purposes of the Workshop were: (1) to assess the current national and international status of phase diagram determinations and evaluations for alloys, ceramics and semiconductors; (2) to determine the…

  5. Bridging the Distance: A Report on Four Distance Education Workshops Held February 1991 = La distance apprivoisee: Un rapport de quatre ateliers sur la formation a distance tenus en feview 19911.

    Science.gov (United States)

    McGreal, Rory; And Others

    This report summarizes activities and recommendations from workshops in Northern Ontario, Canada which were designed to inform principals of the details of the distance education initiative and to examine problems involved in the delivery and reception of distance education courses at the secondary level. Separate workshops were organized for…

  6. Nanotechnology and Life Cycle Assessment. A systems approach to Nanotechnology and the environment:Synthesis of Results Obtained at a Workshop Washington, DC 2–3 October 2006

    OpenAIRE

    Klöpffer, Walter; Curran, Mary Ann; Frankl, Paolo; Heijungs, Reinout; Köhler, Annette; OLSEN Stig Irving

    2007-01-01

    This report summarizes the results of “Nanotechnology and Life Cycle Assessment,” a twoday workshop jointly convened by the Woodrow Wilson Center Project on Emerging Nanotechnologies; the United States Environmental Protection Agency Office of Research and Development; and the European Commission, RTD.G4 “Nano S&T: Converging Science and Technologies.” Held in October 2006, the workshop involved international experts from the fields of Life Cycle Assessment (LCA) and nanotechnology. The m...

  7. Printed Spacecraft Workshop Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The objectives of this workshop are to engage the engineering community at JPL that is knowledgeable in this technology in guiding/developing/critiquing  its...

  8. PV performance modeling workshop summary report.

    Energy Technology Data Exchange (ETDEWEB)

    Stein, Joshua S.; Tasca, Coryne Adelle (SRA International, Inc., Fairfax, VA); Cameron, Christopher P.

    2011-05-01

    During the development of a solar photovoltaic (PV) energy project, predicting expected energy production from a system is a key part of understanding system value. System energy production is a function of the system design and location, the mounting configuration, the power conversion system, and the module technology, as well as the solar resource. Even if all other variables are held constant, annual energy yield (kWh/kWp) will vary among module technologies because of differences in response to low-light levels and temperature. A number of PV system performance models have been developed and are in use, but little has been published on validation of these models or the accuracy and uncertainty of their output. With support from the U.S. Department of Energy's Solar Energy Technologies Program, Sandia National Laboratories organized a PV Performance Modeling Workshop in Albuquerque, New Mexico, September 22-23, 2010. The workshop was intended to address the current state of PV system models, develop a path forward for establishing best practices on PV system performance modeling, and set the stage for standardization of testing and validation procedures for models and input parameters. This report summarizes discussions and presentations from the workshop, as well as examines opportunities for collaborative efforts to develop objective comparisons between models and across sites and applications.

  9. 14th International Probabilistic Workshop

    CERN Document Server

    Taerwe, Luc; Proske, Dirk

    2017-01-01

    This book presents the proceedings of the 14th International Probabilistic Workshop that was held in Ghent, Belgium in December 2016. Probabilistic methods are currently of crucial importance for research and developments in the field of engineering, which face challenges presented by new materials and technologies and rapidly changing societal needs and values. Contemporary needs related to, for example, performance-based design, service-life design, life-cycle analysis, product optimization, assessment of existing structures and structural robustness give rise to new developments as well as accurate and practically applicable probabilistic and statistical engineering methods to support these developments. These proceedings are a valuable resource for anyone interested in contemporary developments in the field of probabilistic engineering applications.

  10. National Educators' Workshop: Update 2003. Standard Experiments in Engineering, Materials Science, and Technology. Part 1

    Science.gov (United States)

    Prior, Edwin J. (Compiler); Jacobs, James A. (Compiler); Edmonson, William (Compiler); Wilkerson, Amy (Compiler)

    2004-01-01

    The 18th Annual National Educators Workshop [NEW:Update 2003] was a part of NASA Langley s celebration of the Centennial of Controlled, Powered Flight by Orville and Wilbur Wright on December 17, 1903. The conference proceedings from NEW:Update 2003 reflect the Flight 100 theme by first providing a historic perspective on the remarkable accomplishments of the Wright Brothers. The historical perspective set the stag for insights into aeronautics and aerospace structures and materials now and into the future. The NEW:Update 2003 proceedings provide valuable resources to educators and students in the form of visuals, experiments and demonstrations for classes/labs at levels ranging from precollege through college education.

  11. National Educators' Workshop: Update 2003. Standard Experiments in Engineering, Materials Science, and Technology. Part 2

    Science.gov (United States)

    Prior, Edwin J. (Compiler); Jacobs, James A. (Compiler); Edmonson, William (Compiler); Wilkerson, Amy (Compiler)

    2004-01-01

    The 18th Annual National Educators Workshop [NEW:Update 2003] was a part of NASA Langley s celebration of the Centennial of Controlled, Powered Flight by Orville and Wilbur Wright on December 17, 1903. The conference proceedings from NEW:Update 2003 reflect the Flight 100 theme by first providing a historic perspective on the remarkable accomplishments of the Wright Brothers. The historical perspective set the stag for insights into aeronautics and aerospace structures and materials now and into the future. The NEW:Update 2003 proceedings provide valuable resources to educators and students in the form of visuals, experiments and demonstrations for classes/labs at levels ranging from precollege through college education.

  12. NSUF Ion Beam Investment Options Workshop Report

    Energy Technology Data Exchange (ETDEWEB)

    Heidrich, Brenden John [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-03-01

    The workshop that generated this data was convened to develop a set of recommendations (a priority list) for possible funding in the area of US domestic ion beam irradiation capabilities for nuclear energy-focused RD&D. The results of this workshop were intended for use by the Department of Energy - Office of Nuclear Energy (DOE-NE) for consideration of support for these facilities. The workshop considered, as part of the initial potential future support discussions, input submitted through the Office of Nuclear Energy Request for Information (RFI) (DE-SOL-0008318, April 13, 2015), but welcomed discussion (and presentation) of other options, whether specific or general in scope. Input from users, including DOE-NE program interests and needs for ion irradiation RD&D were also included. Participants were selected from various sources: RFI respondents, NEUP/NEET infrastructure applicants, universities with known expertise in nuclear engineering and materials science and other developed sources. During the three days from March 22-24, 2016, the workshop was held at the Idaho National Laboratory Meeting Center in the Energy Innovation Laboratory at 775 University Drive, Idaho Falls, ID 83401. Thirty-one members of the ion beam community attended the workshop, including 15 ion beam facilities, six representatives of Office of Nuclear Energy R&D programs, an industry representative from EPRI and the chairs of the NSUF User’s Organization and the NSUF Scientific Review Board. Another four ion beam users were in attendance acting as advisors to the process, but did not participate in the options assessment. Three members of the sponsoring agency, the Office of Science and Technology Innovation (NE-4) also attended the workshop.

  13. Cryogenics Vision Workshop for High-Temperature Superconducting Electric Power Systems Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Energetics, Inc.

    2000-01-01

    The US Department of Energy's Superconductivity Program for Electric Systems sponsored the Cryogenics Vision Workshop, which was held on July 27, 1999 in Washington, D.C. This workshop was held in conjunction with the Program's Annual Peer Review meeting. Of the 175 people attending the peer review meeting, 31 were selected in advance to participate in the Cryogenics Vision Workshops discussions. The participants represented cryogenic equipment manufactures, industrial gas manufacturers and distributors, component suppliers, electric power equipment manufacturers (Superconductivity Partnership Initiative participants), electric utilities, federal agencies, national laboratories, and consulting firms. Critical factors were discussed that need to be considered in describing the successful future commercialization of cryogenic systems. Such systems will enable the widespread deployment of high-temperature superconducting (HTS) electric power equipment. Potential research, development, and demonstration (RD and D) activities and partnership opportunities for advancing suitable cryogenic systems were also discussed. The workshop agenda can be found in the following section of this report. Facilitated sessions were held to discuss the following specific focus topics: identifying Critical Factors that need to be included in a Cryogenics Vision for HTS Electric Power Systems (From the HTS equipment end-user perspective) identifying R and D Needs and Partnership Roles (From the cryogenic industry perspective) The findings of the facilitated Cryogenics Vision Workshop were then presented in a plenary session of the Annual Peer Review Meeting. Approximately 120 attendees participated in the afternoon plenary session. This large group heard summary reports from the workshop session leaders and then held a wrap-up session to discuss the findings, cross-cutting themes, and next steps. These summary reports are presented in this document. The ideas and suggestions

  14. Atomic, Molecular, and Optical Physics Workshop Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Armstrong, Jr., Lloyd [University of Southern California

    1997-09-21

    This document contains the final reports from the five panels that comprised a Workshop held to explore future directions, scientific impacts and technological connections of research in Atomic, Molecular and Optical Physics. This workshop was sponsored by the Department of Energy, Office of Basic Energy Sciences, Chemical Sciences Division and was held at the Westfields International Conference Center in Chantilly, Virginia on September 21-24, 1997. The workshop was chaired by Lloyd Armstrong, Jr., University of Southern California and the five panels focused on the following topics: Panel A: Interactions of Atoms and Molecules with Photons - Low Field Daniel Kleppner (Massachusetts Institute of Technology), chair Panel B: Interactions of Atoms and Molecules with Photons - High Field Phil Bucksbaum (University of Michigan), chair Panel C: Surface Interactions with Photons, Electrons, Ions, Atoms and Molecules J. Wayne Rabalais (University of Houston), chair Panel D: Theory of Structure and Dynamics Chris Greene (University of Colorado), chair Panel E: Nano- and Mesocopic Structures Paul Alivisatos (Lawrence Berkeley National Laboratory), chair The choice of focus areas reflects areas of significant interest to DOE/BES but is clearly not intended to span all fields encompassed by the designation of atomic, molecular and optical physics, nor even all areas that would be considered for review and funding under DOE’s AMOP program. In a similar vein, not all research that might be suggested under these topics in this report would be appropriate for consideration by DOE’s AMOP program. The workshop format included overview presentations from each of the panel chairs, followed by an intensive series of panel discussion sessions held over a two-day period. The panels were comprised of scientists from the U. S. and abroad, many of whom are not supported by DOE’s AMOP Program. This workshop was held in lieu of the customary “Contractors Meeting” held annually for

  15. 2015 Workshop on Continuations

    DEFF Research Database (Denmark)

    his volume contains the papers presented at WoC 2015, the Workshop on Continuations held at ETAPS 2015. There were four submissions. Each of them was reviewed by, on the average, three PC members. The committee decided to accept three papers. The program also includes one invited talk. It also...... documents the depth, variety, and richness of continuations with four distilled tutorials. Thanks are due to the local organizers of ETAPS 2015 for the infras- tructure and to the general chairman of WoC 2015, Ugo de'Liguoro, for initiating this workshop and making it happen...

  16. Twelfth workshop on geothermal reservoir engineering: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Rivera, J. (Stanford Geothermal Program)

    1987-01-22

    Preface The Twelfth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 20-22, 1987. The year ending December 1986 was very difficult for the domestic geothermal industry. Low oil prices caused a sharp drop in geothermal steam prices. We expected to see some effect upon attendance at the Twelfth Workshop. To our surprise, the attendance was up by thirteen from previous years, with one hundred and fifty-seven registered participants. Eight foreign countries were represented: England, France, Iceland, Italy, Japan, Mexico, New Zealand, and Turkey. Despite a worldwide surplus of oil, international geothermal interest and development is growing at a remarkable pace. There were forty-one technical presentations at the Workshop. All of these are published as papers in this Proceedings volume. Seven technical papers not presented at the Workshop are also published; they concern geothermal developments and research in Iceland, Italy, and New Zealand. In addition to these forty-eight technical presentations or papers, the introductory address was given by Henry J. Ramey, Jr. from the Stanford Geothermal Program. The Workshop Banquet speaker was John R. Berg from the Department of Energy. We thank him for sharing with the Workshop participants his thoughts on the expectations of this agency in the role of alternative energy resources, specifically geothermal, within the country???s energy framework. His talk is represented as a paper in the back of this volume. The chairmen of the technical sessions made an important contribution to the workshop. Other than Stanford faculty members they included: M. Gulati, K. Goyal, G.S. Bodvarsson, A.S. Batchelor, H. Dykstra, M.J. Reed, A. Truesdell, J.S. Gudmundsson, and J.R. Counsil. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and students. We would like to thank Jean Cook, Marilyn King, Amy Osugi, Terri Ramey, and Rosalee Benelli for their valued help with the meeting

  17. PREFACE: CYGNUS 2013: 4th Workshop on Directional Detection of Dark Matter

    Science.gov (United States)

    Naka, Tatsuhiro; Miuchi, Kentaro

    2013-12-01

    It is a great pleasure to publish the proceedings of the 4th Workshop on Directional Detection of Dark Matter held in Toyama, Japan on 10-12 June 2013 (CYGNUS 2013). These proceedings contain written versions of the presentations made at CYGNUS 2013 as scientific outputs of the directional detection of dark matter. The GYGNUS workshop started in 2007 at Boulby Underground Laboratory (UK), followed by CYGNUS 2009 (MIT in Cambridge, Massachusetts, USA) and CYGNUS 2011 (AUSSOIS, France). CYGNUS 2013 was held by the combination of a two and a half days of scientific program and a half day visit to the underground laboratory (Kamioka Observatory) as a 'tradition' of CYGNUS workshops. The name 'CYGNUS' came from the fact that the 'dark matter wind' is expected to come from the direction of the constellation Cygnus due to the motion of the Solar system in the galaxy. A general aim of these CYGNUS workshops is to bring together the theoretical and experimental studies on the directional dark matter detection. Directional detection of dark matter is a promising approach to a 'clear detection' and also to 'further investigations' of galactic dark matter, or Weakly Interacting Massive Particles (WIMPs). Directional detection requires the simultaneous detection of the energy and track of low energy recoils. Among many technological challenges for the requirement above, three of them, namely size, background, and directionality (angular resolution and head-tail detection), are most important to demonstrate and improve the quality as a dark matter detector. In the workshop, up-to-date activities by the international reserchers are discussed. The workshop was a great success thanks to the oral contributions and fruitful discussions held throughout the workshop period. We hope that readers will remember and share the great enthusiasm shown during the CYGNUS 2013 workshop. The Editors Tatsuhiro Naka and Kentaro Miuchi

  18. The state-of-the-art port of entry workshop

    Energy Technology Data Exchange (ETDEWEB)

    Godfrey, B.

    1995-05-01

    The increased demand for freight movements through international ports of entry and the signing of the North American Free Trade Agreement (NAFTA) have increased freight traffic at border ports of entry. The State-of-the-Art Port of Entry Workshop initiated a dialogue among technologists and stakeholders to explore the potential uses of technology at border crossings and to set development priorities. International ports of entry are both information and labor intensive, and there are many promising technologies that could be used to provide timely information and optimize inspection resources. Participants universally held that integration of technologies and operations is critical to improving port services. A series of Next Steps was developed to address stakeholder issues and national priorities, such as the National Transportation Policy and National Drug Policy. This report documents the views of the various stakeholders and technologists present at the workshop and outlines future directions of study.

  19. Proceedings of the 1993 non-fluorocarbon insulation, refrigeration and air conditioning technology workshop

    Energy Technology Data Exchange (ETDEWEB)

    1994-09-01

    Sessions included: HFC blown polyurethanes, carbon dioxide blown foam and extruded polystyrenes, plastic foam insulations, evacuated panel insulation, refrigeration and air conditioning, absorption and adsorption and stirling cycle refrigeration, innovative cooling technologies, and natural refrigerants. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  20. Minnowbrook V: 2006 Workshop on Unsteady Flows in Turbomachinery. (Conference Abstracts)

    Science.gov (United States)

    LaGraff, John E. (Editor); Ashpis, David E. (Editor); Oldfield, Martin L. G. (Editor); Gostelow, J. Paul (Editor)

    2006-01-01

    This volume contains materials presented at the Minnowbrook V 2006 Workshop on Unsteady Flows in Turbomachinery, held at the Syracuse University Minnowbrook Conference Center, New York, on August 20-23, 2006. The workshop organizers were John E. LaGraff (Syracuse University), Martin L.G. Oldfield (Oxford University), and J. Paul Gostelow (University of Leicester). The workshop followed the theme, venue, and informal format of four earlier workshops: Minnowbrook I (1993), Minnowbrook II (1997), Minnowbrook III (2000), and Minnowbrook IV (2003). The workshop was focused on physical understanding of unsteady flows in turbomachinery, with the specific goal of contributing to engineering application of improving design codes for turbomachinery. The workshop participants included academic researchers from the United States and abroad and representatives from the gas-turbine industry and U.S. Government laboratories. The physical mechanisms discussed were related to unsteady wakes, active flow control, turbulence, bypass and natural transition, separation bubbles and turbulent spots, modeling of turbulence and transition, heat transfer and cooling, surface roughness, unsteady CFD, and DNS. The workshop summary and the plenary discussion transcripts clearly highlight the need for continued vigorous research in the technologically important area of unsteady flows in turbomachines. This volume contains abstracts and copies of select viewgraphs organized according to the workshop sessions. Full-color viewgraphs and animations are included in the CD-ROM version only (Doc.ID 20070024781).

  1. Risk Management Techniques and Practice Workshop Workshop Report

    Energy Technology Data Exchange (ETDEWEB)

    Quinn, T; Zosel, M

    2008-12-02

    At the request of the Department of Energy (DOE) Office of Science (SC), Lawrence Livermore National Laboratory (LLNL) hosted a two-day Risk Management Techniques and Practice (RMTAP) workshop held September 18-19 at the Hotel Nikko in San Francisco. The purpose of the workshop, which was sponsored by the SC/Advanced Scientific Computing Research (ASCR) program and the National Nuclear Security Administration (NNSA)/Advanced Simulation and Computing (ASC) program, was to assess current and emerging techniques, practices, and lessons learned for effectively identifying, understanding, managing, and mitigating the risks associated with acquiring leading-edge computing systems at high-performance computing centers (HPCCs). Representatives from fifteen high-performance computing (HPC) organizations, four HPC vendor partners, and three government agencies attended the workshop. The overall workshop findings were: (1) Standard risk management techniques and tools are in the aggregate applicable to projects at HPCCs and are commonly employed by the HPC community; (2) HPC projects have characteristics that necessitate a tailoring of the standard risk management practices; (3) All HPCC acquisition projects can benefit by employing risk management, but the specific choice of risk management processes and tools is less important to the success of the project; (4) The special relationship between the HPCCs and HPC vendors must be reflected in the risk management strategy; (5) Best practices findings include developing a prioritized risk register with special attention to the top risks, establishing a practice of regular meetings and status updates with the platform partner, supporting regular and open reviews that engage the interests and expertise of a wide range of staff and stakeholders, and documenting and sharing the acquisition/build/deployment experience; and (6) Top risk categories include system scaling issues, request for proposal/contract and acceptance testing, and

  2. Biogas and Fuel Cells Workshop Summary Report: Proceedings from the Biogas and Fuel Cells Workshop, Golden, Colorado, June 11-13, 2012

    Energy Technology Data Exchange (ETDEWEB)

    2013-01-01

    The U.S. Department of Energy (DOE) National Renewable Energy Laboratory (NREL) held a Biogas and Fuel Cells Workshop June 11-13, 2012, in Golden, Colorado, to discuss biogas and waste-to-energy technologies for fuel cell applications. The overall objective was to identify opportunities for coupling renewable biomethane with highly efficient fuel cells to produce electricity; heat; combined heat and power (CHP); or combined heat, hydrogen and power (CHHP) for stationary or motive applications. The workshop focused on biogas sourced from wastewater treatment plants (WWTPs), landfills, and industrial facilities that generate or process large amounts of organic waste, including large biofuel production facilities (biorefineries).

  3. US Army Research Office Workshop on Smart Materials, Structures and Mathematical Issues proceedings

    Science.gov (United States)

    Rogers, Craig A.; Ahmad, I.

    This workshop was held to identify recent significant developments and breakthroughs in science and technology. Its main objective is to evolve a consensus on the definition and characteristics of a smart/intelligent material or structure, and discuss mechanisms and possible methods to produce them. Another objective is to identify directions of future research in this field. Included are the abstracts/papers presented at the three sessions. The three sessions contain a wide range of presentations concerning numerous technologies for actuators, sensors, intelligence, control, constitutive modeling, and other scientific fields that have become essential to the emerging science and technologies of smart materials and structures. At the end of each session a discussion period was held to address some of the issues of general concern related to the mission of the workshop.

  4. Proceedings of the workshop for exchange of technology for CWC inspections

    Energy Technology Data Exchange (ETDEWEB)

    McGuire, R.R.

    1993-04-01

    With the signing of the Chemical Weapons Convention (CWC), the work of the Preparatory Commission in defining the modalities of on-site verification inspections will begin early in 1993. One of the methods for increasing the effectiveness of inspections is the collection of samples for chemical analysis. The CWC allows for this analysis to be performed either at the site of the inspection or in a dedicated off-site laboratory. The decision as to where samples are to be analyzed in any specific instance may involve a consideration of the threat, real or perceived, to the compromise of legitimate sensitive host-party information. The ability to perform efficient chemical analysis at the inspection site, where samples remain in joint (host-inspector) custody and the analytical procedures can be observed by the host, can alleviate much of the concern over possible loss of confidential information in both government and industry. This workshop was designed to encourage the exchange of information among participants with experience in the use of analytical equipment for on-site sample collection and analysis. Individual projects are processed separately for the databases.

  5. Outcomes from the DOE Workshop on Turbulent Flow Simulation at the Exascale

    Energy Technology Data Exchange (ETDEWEB)

    Sprague, Michael; Boldyrev, Stanislav; Chang, Choong-Seock; Fischer, Paul F.; Grout, Ray; Gustafson, William I.; Hittinger, Jeffrey A.; Merzari, Elia; Moser, Robert

    2016-06-17

    This paper summarizes the outcomes from the Turbulent Flow Simulation at the Exascale: Opportunities and Challenges Workshop, which was held 4-5 August 2015, and was sponsored by the U.S. Department of Energy Office of Advanced Scientific Computing Research. The workshop objective was to define and describe the challenges and opportunities that computing at the exascale will bring to turbulent-flow simulations in applied science and technology. The need for accurate simulation of turbulent flows is evident across the U.S. Department of Energy applied-science and engineering portfolios, including combustion, plasma physics, nuclear-reactor physics, wind energy, and atmospheric science. The workshop brought together experts in turbulent-flow simulation, computational mathematics, and high-performance computing. Building upon previous ASCR workshops on exascale computing, participants defined a research agenda and path forward that will enable scientists and engineers to continually leverage, engage, and direct advances in computational systems on the path to exascale computing.

  6. Report of the first international workshop on human chromosome 8 mapping. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Wood, S.; Ben Othmane, K.; Bergerheim, U.S.R. [and others

    1993-12-31

    The first international chromosome 8 workshop was held in Vancouver, Canada May 2--4, 1993. The conference was attended by 23 participants from Australia, Canada, Germany, the Netherlands, Sweden, the United Kingdom and the US. Twenty three abstracts are included from this workshop. The workshop was supported by CGAT/CTAG (Canadian Genome Analysis & Technology Program/Programme Canadien de Technologie & D`Analyse du Genome) as well as by travel funds allocated by the National Institutes of Health and the Department of Energy of the United States and by agencies within the countries of overseas participants. The goals of the workshop were to evaluate new locus assignments, review new data obtained for previously assigned loci, develop a consensus marker order for chromosome 8, assess and integrate physical mapping information, identify resources and foster collaboration.

  7. Report of the workshop on transferring X-ray Lithography Synchrotron (XLS) technology to industry

    Energy Technology Data Exchange (ETDEWEB)

    Marcuse, W.

    1987-01-01

    This paper reports on plans to develop an x-ray synchrotron for use in lithography. The primary concern of the present paper is technology transfer from national laboratories to private industry. (JDH)

  8. TECHNOLOGICAL COMPETENCE OF FUTURE ENGINEER: FORMATION AND DEVELOPMENT IN COMPUTER INTEGRATED LABORATORY WORKSHOP ON PHYSICS

    Directory of Open Access Journals (Sweden)

    Ihor S. Chernetskyi

    2013-12-01

    Full Text Available The article examines the category «technological competence» and the definition of its components according to the educational process. A structural and functional model of technological competence of future engineers through forms, means, methods and technologies of computer oriented laboratory work. Selected blocks and elements of the model in the course of a typical student laboratory work on the course of general physics. We consider the possibility of using some type of digital labs «Phywe», «Fourier» and modern electronic media (flash books to optimize laboratory work at the Technical University. The analysis of the future research of structural elements model of technological competence.

  9. Proceedings of the 1st workshop on radioactive waste treatment technologies, October 28, 1997 Taejon, Korea

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    This proceedings describes the volume reduction of radioactive waste, the radioactive waste treatment technology, the decontamination and decommissioning, and the incineration and solidification of radioactive waste. Twenty two papers are submitted.

  10. Report on the 2011 and 2012 NASA Ames Research Center (ARC) / Alaska State Cargo Airship Workshops

    Science.gov (United States)

    Hochstettler, Ronald

    2012-01-01

    This presentation will summarize the Cargo Airships for Northern Operations workshop that was held August 24-25, 2011. This workshop co-sponsored by NASA ARC and the Alaska State Department of Transportation was initiated by interest from Alaska Lt. Governor Mead Treadwell for assistance in investigating the potential benefits of proposed cargo airships for the Alaskan economy and societal needs. The workshop provided a brief background on the technology and operational aspects of conventional airships and hybrids followed by presentations on issues affecting cargo airship operations such as weather management, insurance, regulations, crew duty/rest rules, and available support infrastructures. Speakers representing potential cargo airship users from Alaskan State and commercial organizations presented the needs they felt could be met by cargo airship services. Presenters from Canadian private and military interests also detailed applications and missions that cargo airships could provide to remote regions of Canada. Cost drivers of cargo airship operations were also addressed and tools for modeling and analyzing operational factors and costs affecting cargo airship operations were discussed. Four breakout sessions were held which allowed workshop participants to contribute inputs to four topic areas: Business Approaches and Strategies (financing incentives public/private partnerships etc) for Airship Development and Operation, Design, Development, Production Challenges, and Possible Solutions, Regulatory, Certification, Legal, and Insurance Issues, and Operational Issues, Customer Requirements, and Airship Requirements. A follow on to the 2011 cargo airship workshop is being planned for July 31 August 2, 2012. A status update on this second workshop will also be presented.

  11. Emerging Technologies Program Integration Report. Volume 2. Background, Delphi and Workshop Data. Appendices

    Science.gov (United States)

    1987-05-04

    models for specific a;plication domains. --Need experience with specific applications that will push the hardware/ .’ software/conceptual resources...militaryf impact of this technology: A. How might the tecnology in question change US military capabilities? Diminish days lost due to common viral...capability. To achieve necessary goals will require pushing of 7m1 wave tube, solid state device and antenna technologies. Oirk R. Klose . REPORTER: AV 995

  12. Workshop on Agricultural Air Quality: State of the science

    Science.gov (United States)

    Aneja, Viney P.; Blunden, Jessica; Roelle, Paul A.; Schlesinger, William H.; Knighton, Raymond; Niyogi, Dev; Gilliam, Wendell; Jennings, Greg; Duke, Clifford S.

    The first Workshop on Agricultural Air Quality: State of the Science was held at the Bolger Center in Potomac, Maryland from 4 to 8 June 2006. This international conference assembled approximately 350 people representing 25 nations from 5 continents, with disciplines ranging from atmospheric chemistry to soil science. The workshop was designed as an open forum in which participants could openly exchange the most current knowledge and learn about numerous international perspectives regarding agricultural air quality. Participants represented many stakeholder groups concerned with the growing need to assess agricultural impacts on the atmosphere and to develop beneficial policies to improve air quality. The workshop focused on identifying methods to improve emissions inventories and best management practices for agriculture. Workshop participants also made recommendations for technological and methodological improvements in current emissions measurement and modeling practices. The workshop commenced with a session on agricultural emissions and was followed by international perspectives from the United States, Europe, Australia, India, and South America. This paper summarizes the findings and issues of the workshop and articulates future research needs. These needs were identified in three general areas: (1) improvement of emissions measurement; (2) development of appropriate emission factors; and (3) implementation of best management practices (BMPs) to minimize negative environmental impacts. Improvements in the appropriate measurements will inform decisions regarding US farming practices. A need was demonstrated for a national/international network to monitor atmospheric emissions from agriculture and their subsequent depositions to surrounding areas. Information collected through such a program may be used to assess model performance and could be critical for evaluating any future regulatory policies or BMPs. The workshop concluded that efforts to maximize

  13. Technology policy for climate change mitigation: a transatlantic perspective

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    This workshop was the second climate policy conference jointly organized by RFF and IFRI in Paris. (The first one, ''How to Make Progress Post-Kyoto?'', was held on March 19, 2003). This Summary Paper is divided into two parts: The first part presents short summaries of all the presentations at the workshop (rationale and past experience in technology policies, the challenges and policy responses of the climate friendly technologies). The second part, which is an edited version of the closing remarks by Pierre Noel (Ifri), highlights some of the policy lessons that emerged from the workshop. (A.L.B.)

  14. WALLTURB International Workshop

    CERN Document Server

    Jimenez, Javier; Marusic, Ivan

    2011-01-01

    This book brings together selected contributions from the WALLTURB workshop on ”Understanding and modelling of wall turbulence” held in Lille, France, on April 21st to 23rd 2009. This workshop was organized by the WALLTURB consortium, in order to present to the relevant scientific community the main results of the project and to stimulate scientific discussions around the subject of wall turbulence. The workshop reviewed the recent progress in theoretical, experimental and numerical approaches to wall turbulence. The problems of zero pressure gradient, adverse pressure gradient and separating turbulent boundary layers were addressed in detail with the three approaches, using the most advanced tools. This book is a milestone in the research field, thanks to the high level of the invited speakers and the involvement of the contributors and a testimony of the achievement of the WALLTURB project.

  15. African Otter Workshop

    Directory of Open Access Journals (Sweden)

    Jan Reed-Smith

    2016-04-01

    Full Text Available All concerned thought this was an excellent workshop with important progress made towards creating a viable beginning of an African Otter Network. There is a long road ahead but the 2015 African Otter Workshop is a start on developing range country partners, activists and researchers as well as collaborating on issue identification and resolution which will assist in preserving at least some refugia for Africa’s otters. A list of actions was agreed on, including the creation of an African Otter Network website and social media network, apublic Otter Awareness facebook page, encouraging online reporting of otter sightings, conducting otter awareness surveys, and emphasising the need for communication with the public, other members of the network and other professionals. information not shared or documented is information LOST. A Second African Otter Workshop should be held in 2017 elsewhere in Africa to encourage attendance from a wider range of countries.

  16. Vulcano Workshop 2016

    CERN Document Server

    2016-01-01

    We announce the XVI Vulcano Workshop, which will be held from May 22nd to May 28th, 2016 in the Vulcano Island (Sicily, Italy). As in the past editions, the workshop will aim to gather people from High Energy Astrophysics and Particle Physics to discuss the most recent highlights in these fields. The workshop will cover the following topics: Astrophysics/Cosmology, Astrophysics/Gravity, Dark Matter, Particle Physics, Cosmic Rays, Gamma/Neutrino Astronomy, Neutrinos and Future Prospects. The scientific program will include several 30-minute review talks, to introduce the current problems, and 20-minute talks, giving new experimental and theoretical results. The participation is by invitation and limited to 80 people.

  17. Beyond moore computing research challenge workshop report.

    Energy Technology Data Exchange (ETDEWEB)

    Huey, Mark C. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Aidun, John Bahram [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2013-10-01

    We summarize the presentations and break out session discussions from the in-house workshop that was held on 11 July 2013 to acquaint a wider group of Sandians with the Beyond Moore Computing research challenge.

  18. Collection Development: A Summary of Workshop Discussions.

    Science.gov (United States)

    Dudley, Norman

    1979-01-01

    Highlights from five workshop sessions held during the Preconference Institute on Collection Development in June 1977 focus on collection development policy statements, selection tools, budgeting, evaluation, and weeding. (MBR)

  19. United Nations/European Space Agency Workshops on Basic Space Science

    Science.gov (United States)

    Haubold, H. J.; Ocampo, A.; Torres, S.; Wamsteker, W.

    1995-01-01

    In 1958, the United Nations (UN) formally recognized a new potential for international cooperation by establishing an ad hoc Committee on the Peaceful Uses of Outer Space (COPUOS). A year later the Committee became a permanent body, and by 1983 membership had expanded to 53 states, with more than half of the members coming from the developing world. In 1970, COPUOS established the UN Program on Space Applications in order to strengthen cooperation in space science and technology between non-industrialized and industrialized countries. In the last few years, the UN and its COPUOS have paid increasing attention to education and research in space science and technology, including basic space science. In 1991 the UN, in cooperation with ESA, initiated the organization of annual Workshops in Basic Space Science for developing countries. These Workshops are designed to be held in one of the following major regions: Asia and the Pacific, Latin America and the Caribbean, Africa, Western Asia, and Europe. Accordingly, Basic Space Science Workshops have already been held in India (1991), Costa Rica andColombia (1992), and Nigeria (1993). The fourth Workshop was held from 27 June to 1 July 1994 at the Cairo University, in Egypt, for Western Asia.

  20. United Nations/European Space Agency Workshops on Basic Space Science

    Science.gov (United States)

    Haubold, H. J.; Ocampo, A.; Torres, S.; Wamsteker, W.

    1995-02-01

    In 1958, the United Nations (UN) formally recognized a new potential for international cooperation by establishing an ad hoc Committee on the Peaceful Uses of Outer Space (COPUOS). A year later the Committee became a permanent body, and by 1983 membership had expanded to 53 states, with more than half of the members coming from the developing world. In 1970, COPUOS established the UN Program on Space Applications in order to strengthen cooperation in space science and technology between non-industrialized and industrialized countries. In the last few years, the UN and its COPUOS have paid increasing attention to education and research in space science and technology, including basic space science. In 1991 the UN, in cooperation with ESA, initiated the organization of annual Workshops in Basic Space Science for developing countries. These Workshops are designed to be held in one of the following major regions: Asia and the Pacific, Latin America and the Caribbean, Africa, Western Asia, and Europe. Accordingly, Basic Space Science Workshops have already been held in India (1991), Costa Rica and Colombia (1992), and Nigeria (1993). The fourth Workshop was held from 27 June to 1 July 1994 at the Cairo University, in Egypt, for Western Asia.

  1. 18th Workshop on Crystalline Silicon Solar Cells and Modules: Materials and Processes; Workshop Proceedings, 3-6 August 2008, Vail, Colorado

    Energy Technology Data Exchange (ETDEWEB)

    Sopori, B. L.

    2008-09-01

    The National Center for Photovoltaics sponsored the 18th Workshop on Crystalline Silicon Solar Cells & Modules: Materials and Processes, held in Vail, CO, August 3-6, 2008. This meeting provided a forum for an informal exchange of technical and scientific information between international researchers in the photovoltaic and relevant non-photovoltaic fields. The theme of this year's meeting was 'New Directions for Rapidly Growing Silicon Technologies.'

  2. Foreword for the special issue of selected papers from the 7th EDBT/ICDT Workshop on Privacy and Anonymity in Information Society (PAIS 2014

    Directory of Open Access Journals (Sweden)

    Traian Marius Truta

    2015-04-01

    Full Text Available The seventh Workshop on Privacy and Anonymity in Information Society (PAIS 2014 was held in conjunction with the International Conference on Extending Database Technology (EDBT and International Conference on Database Theory (ICDT in Athens, Greece. The PAIS 2014 workshop provided an open yet focused platform for researchers and practitioners from fields such as computer science, statistics, healthcare informatics, and law to discuss and present current research challenges and advances in data privacy and anonymity research. The present special issue contains three extended papers that have been selected as the best three papers presented at PAIS 2014 workshop.

  3. Workshops as a Research Methodology

    DEFF Research Database (Denmark)

    Ørngreen, Rikke; Levinsen, Karin Tweddell

    2017-01-01

    This paper contributes to knowledge on workshops as a research methodology, and specifically on how such workshops pertain to e-learning. A literature review illustrated that workshops are discussed according to three different perspectives: workshops as a means, workshops as practice, and worksh......This paper contributes to knowledge on workshops as a research methodology, and specifically on how such workshops pertain to e-learning. A literature review illustrated that workshops are discussed according to three different perspectives: workshops as a means, workshops as practice......, and workshops as a research methodology. Focusing primarily on the latter, this paper presents five studies on upper secondary and higher education teachers’ professional development and on teaching and learning through video conferencing. Through analysis and discussion of these studies’ findings, we argue...... that workshops provide a platform that can aid researchers in identifying and exploring relevant factors in a given domain by providing means for understanding complex work and knowledge processes that are supported by technology (for example, e-learning). The approach supports identifying factors...

  4. A Preliminary Evaluation of Short Blended Online Training Workshop for TPACK Development Using Technology Acceptance Model

    Science.gov (United States)

    Alsofyani, Mohammed Modeef; Aris, Baharuddin bin; Eynon, Rebecca; Majid, Norazman Abdul

    2012-01-01

    The use of Short Blended Online Training (SBOT) for the development of Technological Pedagogical and Content Knowledge (TPACK) is a promising approach to facilitate the use of e-learning by academics. Adult learners prefer the blend of pedagogies such as the presentation, demonstration, practice and feedback if they are structured and…

  5. Science for Society Workshop Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    Wolfe, Amy K [ORNL; Bjornstad, David J [ORNL; Lenhardt, W Christopher [ORNL; Shumpert, Barry L [ORNL; Wang, Stephanie [ORNL

    2012-02-01

    Science for Society, a workshop held at the Oak Ridge National Laboratory (ORNL) on September 27, 20111, explored ways to move Laboratory science toward use. It sought actionable recommendations. Thus the workshop focused on: (1) current practices that promote and inhibit the translation of science into use, (2) principles that could lead to improving ORNL's translational knowledge and technology transfer efforts, and (3) specific recommendations for making these principles operational. This highly interactive workshop struck a positive chord with participants, a group of 26 ORNL staff members from diverse arenas of science and technology (S and T), technology transfer, and external laboratory relations, who represented all levels of science, technology, and management. Recognizing that the transformation of fundamental principles into operational practices often follows a jagged path, the workshop sought to identify key choices that could lead to a smoother journey along this path, as well as choices that created roadblocks and bottlenecks. The workshop emphasized a portion of this pathway, largely excluding the marketplace. Participants noted that research translation includes linkages between fundamental and applied research and development (R and D), and is not restricted to uptake by manufacturers, consumers, or end users. Three crosscutting ideas encapsulate workshop participants observations: (1) ORNL should take more action to usher the translation of its S and T products toward use, so as to make a positive national and global impact and to enhance its own competitiveness in the future; (2) ORNL (and external entities such as DOE and Congress) conveys inconsistent messages with regard to the importance of research translation and application, which (a) creates confusion, (b) poses disincentives to pursue research translation, (c) imposes barriers that inhibit cross-fertilization and collaboration, and (d) diminishes the effectiveness of both the

  6. Proceedings 8th Workshop on Fixed Points in Computer Science

    CERN Document Server

    Miller, Dale; 10.4204/EPTCS.77

    2012-01-01

    This volume contains the proceedings of the Eighth Workshop on Fixed Points in Computer Science which took place on 24 March 2012 in Tallinn, Estonia as an ETAPS-affiliated workshop. Past workshops have been held in Brno (1998, MFCS/CSL workshop), Paris (2000, LC workshop), Florence (2001, PLI workshop), Copenhagen (2002, LICS (FLoC) workshop), Warsaw (2003, ETAPS workshop), Coimbra (2009, CSL workshop), and Brno (2010, MFCS-CSL workshop). Fixed points play a fundamental role in several areas of computer science and logic by justifying induction and recursive definitions. The construction and properties of fixed points have been investigated in many different frameworks such as: design and implementation of programming languages, program logics, and databases. The aim of this workshop is to provide a forum for researchers to present their results to those members of the computer science and logic communities who study or apply the theory of fixed points.

  7. Proceedings of the Advanced Hadron Facility accelerator design workshop, February 20--25, 1989

    Energy Technology Data Exchange (ETDEWEB)

    Thiessen, H.A. (comp.)

    1990-04-01

    The International Workshop on Hadron Facility Technology was held February 20--25, 1989, at the Study Center at Los Alamos National Laboratory. This volume (second of two) included papers on computer controls, polarized beam, rf, magnet and power supplies, experimental areas, and instabilities. Participants included groups from AHF, Brookhaven National Laboratory, European Hadron Facility, Fermilab, and the Moscow Meson Factory. The workshop was well attended by members of the Los Alamos staff. The interchange of information and the opportunity by criticism by peers was important to all who attended.

  8. Advanced Power Electronics Interfaces for Distributed Energy Workshop Summary: August 24, 2006, Sacramento, California

    Energy Technology Data Exchange (ETDEWEB)

    Treanton, B.; Palomo, J.; Kroposki, B.; Thomas, H.

    2006-10-01

    The Advanced Power Electronics Interfaces for Distributed Energy Workshop, sponsored by the California Energy Commission Public Interest Energy Research program and organized by the National Renewable Energy Laboratory, was held Aug. 24, 2006, in Sacramento, Calif. The workshop provided a forum for industry stakeholders to share their knowledge and experience about technologies, manufacturing approaches, markets, and issues in power electronics for a range of distributed energy resources. It focused on the development of advanced power electronic interfaces for distributed energy applications and included discussions of modular power electronics, component manufacturing, and power electronic applications.

  9. Technology Evaluation in the Elderly Abstracts from the meeting held in Toronto, September 21?23, 2014

    OpenAIRE

    Muscedere, John; Kolomitro, Klodiana; Stockley, Denise; Barrie, Carol; Elliott, J.; Sneyers, B; Little, A.; Rose, L.; Hunt, Cindy; Ennis, Naomi; Ouchterlony, Donna; McNeil, Heather; Elliott, Jacobi; Stolee, Paul; Pope, Karen

    2015-01-01

    Technology Evaluation in the Elderly Network (TVN) was funded in July 2012 under the Canadian Networks of Centres of Excellence (NCE) program, to develop, rigorously evaluate, and ethically disseminate information about the use of technologies for the care of seriously ill elderly patients and their families. TVN?s vision is to position Canada as a global leader in providing the highest quality of care for its aging population. The focus is on the frail elderly with multiple chronic condition...

  10. Technology Evaluation in the Elderly Abstracts from the meeting held in Toronto, September 21–23, 2014

    OpenAIRE

    Muscedere, John; Kolomitro, Klodiana; Stockley, Denise; Barrie, Carol; Elliott, J; Sneyers, B; Little, A.; Rose, L; Hunt, Cindy; Ennis, Naomi; Ouchterlony, Donna; McNeil, Heather; Elliott, Jacobi; Stolee, Paul; Pope, Karen

    2015-01-01

    Technology Evaluation in the Elderly Network (TVN) was funded in July 2012 under the Canadian Networks of Centres of Excellence (NCE) program, to develop, rigorously evaluate, and ethically disseminate information about the use of technologies for the care of seriously ill elderly patients and their families. TVN’s vision is to position Canada as a global leader in providing the highest quality of care for its aging population. The focus is on the frail elderly with multiple chronic condition...

  11. Industrial Fuel Flexibility Workshop

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2006-09-01

    On September 28, 2006, in Washington, DC, ITP and Booz Allen Hamilton conducted a fuel flexibility workshop with attendance from various stakeholder groups. Workshop participants included representatives from the petrochemical, refining, food and beverage, steel and metals, pulp and paper, cement and glass manufacturing industries; as well as representatives from industrial boiler manufacturers, technology providers, energy and waste service providers, the federal government and national laboratories, and developers and financiers.

  12. Solid State Energy Conversion Alliance 2nd Annual Workshop Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    National Energy Technology Laboratory

    2001-03-30

    The National Energy Technology Laboratory (NETL) and the Pacific Northwest National Laboratory (PNNL) are pleased to provide the proceedings of the second annual Solid State Energy Conversion Alliance (SECA) Workshop held on March 29-30, 2001 in Arlington. The package includes the presentations made during the workshop, a list of participants, and the results of the breakout sessions. Those sessions covered stack materials and processes, power electronics, balance of plant and thermal integration, fuel processing technologies, and stack and system performance modeling. The breakout sessions have been reported as accurately as possible; however, due to the recording and transcription process errors may have occurred. If you note any significant omissions or wish to provide additional information, we welcome your comments and hope that all stakeholder groups will use the enclosed information in their planning endeavors.

  13. Fourteenth workshop geothermal reservoir engineering: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Ramey, H.J. Jr.; Kruger, P.; Horne, R.N.; Miller, F.G.; Brigham, W.E.; Cook, J.W.

    1989-12-31

    The Fourteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 24--26, 1989. Major areas of discussion include: (1) well testing; (2) various field results; (3) geoscience; (4) geochemistry; (5) reinjection; (6) hot dry rock; and (7) numerical modelling. For these workshop proceedings, individual papers are processed separately for the Energy Data Base.

  14. Fourteenth workshop geothermal reservoir engineering: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Ramey, H.J. Jr.; Kruger, P.; Horne, R.N.; Miller, F.G.; Brigham, W.E.; Cook, J.W.

    1989-01-01

    The Fourteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 24--26, 1989. Major areas of discussion include: (1) well testing; (2) various field results; (3) geoscience; (4) geochemistry; (5) reinjection; (6) hot dry rock; and (7) numerical modelling. For these workshop proceedings, individual papers are processed separately for the Energy Data Base.

  15. 2002 Sino-African SHP Training Workshop

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The 2002 Sino-African SHP Training Workshop was held from 10 May to 18 June 2002 at Hangzhou Regional Center for Small Hydro Power(HRC). Attended altogether 9 participants from 5 African countries, i.e. Burundi, Nigeria, South African, Tanzania and Tunisia. This is the second training workshop on SHP that HRC conducted for African countries.

  16. Proceedings of the Military Applications for Emerging Water Use Technologies Workshop

    Science.gov (United States)

    2009-04-01

    technology where human contact involved. • Decreasing water availability because source estimates are based on a wet century could result in: o More...occurs in four states (Ari- zona , California, Florida, and Texas). Other states (Washington, Oregon, Nevada, Colorado, New Mexico Georgia, Virginia... wet scrubbers, and boiler makeup) are major potential consumers of re- used water. Installation central vehicle wash facilities that use recycled

  17. The First Workshop on Blackboard Systems

    OpenAIRE

    Dodhiawala, Rajendra; Jagannathan, Vasudevan; Baum, Larry; Skillman, Tom

    1989-01-01

    The emergence of the blackboard architecture as a widely used paradigm for problem solving led us and other members of the blackboard research community to organize a workshop. The workshop was held during the 1987 Association for the Advancement of Artificial Intelligence Conference in Seattle. The main purpose of the workshop was to highlight the advances in blackboard architectures since the introduction of the paradigm in Hearsay-II and identify issues relevant to future blackboard system...

  18. Reports of the 2016 AAAI Workshop Program

    OpenAIRE

    2016-01-01

    The Workshop Program of the Association for the Advancement of Artificial Intelligence’s Thirtieth AAAI Conference on Artificial Intelligence (AAAI-16) was held at the beginning of the conference, February 12-13, 2016. Workshop participants met and discussed issues with a selected focus — providing an informal setting for active exchange among researchers, developers and users on topics of current interest. To foster interaction and exchange of ideas, the workshops were kept small, with 25-65...

  19. Workshop on programming beta cell development, impairment and regeneration

    DEFF Research Database (Denmark)

    Heller, Scott; Nielsen, Jens Høiriis

    2012-01-01

    Helsingør, the city of Hamlet in Denmark, provided the site for the workshop "Programming Beta Cell Development, Impairment and Regeneration" on October 23-26th, 2011. The same location has held two EASD Islet study group meetings, while the previous three workshops were held in Helsinki, Finland...

  20. Li'l Red Schoolhouse workshops

    Science.gov (United States)

    1993-01-01

    Education specialists at Stennis conduct staff development workshops for elementary and secondary teachers of math, science and technology and other subjects as well as specialized workshops conducted in the NASA Li'l Red Schoolhouse.

  1. Workshop on electronuclear physics with internal targets: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Arnold, R.G.; Minehart, R.C. (eds.)

    1987-05-01

    The Workshop on Electronuclear Physics with Internal Targets was held at SLAC on January 5-8, 1987. The idea for this workshop grew out of interest among physicists at SLAC and MIT/Bates who have been exploring the possibilities for internal targets in the PEP ring at SLAC and in a proposed stretcher ring at MIT/Bates. The aim of the workshop was to bring together physicists from these groups and from other laboratories and universities to discuss the new physics that could be made accessible with internal targets, and to share information on recent developments in internal target technology, on the impact of internal targets on ring operation, and on the detector requirements. The workshop was sponsored by NPAS, the program of Nuclear Physics at SLAC, and it was attended by more than 100 physicists from the US, Canada, Europe, and Japan. The workshop sessions began with two days of invited talks followed by two days of shorter presentations organized by the chairmen of four Working Groups. Written versions of all the plenary talks and all but four of the Working Group talks are presented here.

  2. Proceedings of the Technology Transfer Seminar/Workshop on the Application of Pollution Abatement Technology to Local Governments

    Science.gov (United States)

    1975-05-01

    the form of ferric chlorides, and good results can be achieved with this kind of process. The Swedes utilize aluminum sulphate to do the same thing...We in the County, did research using, both phosphorous removal by ferric chlorides and by aluminum sulphate addition to the aeration tanks. So, with...Toxicity of deodorizing chemicals added to vessel retentive systems; and 6 (c) Available technology to properly treat and dispose of pump-out waste

  3. First Workshop on Sharing and Reusing Architectural Knowledge

    NARCIS (Netherlands)

    Lago, Patricia; Avgeriou, Paris

    2006-01-01

    The first SHARK (SHAring and Reusing architectural Knowledge) workshop, attempted to explore the state of the art as well as the state of the practice in this emerging field. This workshop report presents the themes of the workshop, it summarizes the results of the discussions held about various top

  4. 78 FR 12763 - Fecal Microbiota for Transplantation; Public Workshop

    Science.gov (United States)

    2013-02-25

    ... HUMAN SERVICES Food and Drug Administration Fecal Microbiota for Transplantation; Public Workshop AGENCY... ``Fecal Microbiota for Transplantation.'' The purpose of the public workshop is to exchange information... fecal microbiota for transplantation (FMT). ] Date and Time: The public workshop will be held on May...

  5. Proceedings and findings of the geothermal commercialization workshop

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, J.; Dhillon, H.

    1979-04-01

    The proceedings are presented of a Geothermal Commercialization Workshop conducted by the Division of Geothermal Resource Management, Department of Energy. The workshop was held in January-February 1979 at The MITRE Corporation facility in McLean, Virginia. The workshop addressed geothermal hydrothermal commercialization achievements and needs in the areas of Marketing and Outreach, Economics, Scenarios, and Progress Monitoring.

  6. Berlin Workshop Series 2010 : Climate Governance and Development

    OpenAIRE

    Ansohn, Albrecht; Pleskovic, Boris

    2011-01-01

    This volume, Berlin workshop series 2010, contains a selection of papers presented at the 11th International Policy Workshop, held in Berlin, September 28-30, 2008. The workshop was jointly organized by Inwent-Capacity Building International, Germany, and the World Bank in preparation for the World Bank's World Development Report 2010. It provided a forum for an exchange of ideas and viewp...

  7. RESULTS FROM THE (1) DATA COLLECTION WORKSHOP, (2) MODELING WORKSHOP AND (3) DRILLING AND CORING METHODS WORKSHOP AS PART OF THE JOINT INDUSTRY PARTICIPATION (JIP) PROJECT TO CHARACTERIZE NATURAL GAS HYDRATES IN THE DEEPWATER GULF OF MEXICO

    Energy Technology Data Exchange (ETDEWEB)

    Stephen A. Holditch; Emrys Jones

    2002-09-01

    In 2000, Chevron began a project to learn how to characterize the natural gas hydrate deposits in the deepwater portions of the Gulf of Mexico. A Joint Industry Participation (JIP) group was formed in 2001, and a project partially funded by the U.S. Department of Energy (DOE) began in October 2001. The primary objective of this project is to develop technology and data to assist in the characterization of naturally occurring gas hydrates in the deepwater Gulf of Mexico. These naturally occurring gas hydrates can cause problems relating to drilling and production of oil and gas, as well as building and operating pipelines. Other objectives of this project are to better understand how natural gas hydrates can affect seafloor stability, to gather data that can be used to study climate change, and to determine how the results of this project can be used to assess if and how gas hydrates act as a trapping mechanism for shallow oil or gas reservoirs. As part of the project, three workshops were held. The first was a data collection workshop, held in Houston during March 14-15, 2002. The purpose of this workshop was to find out what data exist on gas hydrates and to begin making that data available to the JIP. The second and third workshop, on Geoscience and Reservoir Modeling, and Drilling and Coring Methods, respectively, were held simultaneously in Houston during May 9-10, 2002. The Modeling Workshop was conducted to find out what data the various engineers, scientists and geoscientists want the JIP to collect in both the field and the laboratory. The Drilling and Coring workshop was to begin making plans on how we can collect the data required by the project's principal investigators.

  8. International Workshop on Advanced Dynamics and Model Based Control of Structures and Machines

    CERN Document Server

    Belyaev, Alexander; Krommer, Michael

    2017-01-01

    The papers in this volume present and discuss the frontiers in the mechanics of controlled machines and structures. They are based on papers presented at the International Workshop on Advanced Dynamics and Model Based Control of Structures and Machines held in Vienna in September 2015. The workshop continues a series of international workshops held in Linz (2008) and St. Petersburg (2010).

  9. Photovoltaic technology and applications: Overview for the workshop on photochemistry research opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Benner, J.P. [National Renewable Energy Laboratory, Golden, CO (United States)

    1996-09-01

    The business surrounding photovoltaic energy conversion for terrestrial applications has changed dramatically in the last several years. It is now a business that makes money. Industry is responding. with manufacturing capacity expansions, and planned expansions, that will triple U.S. annual output within the next eighteen months. The majority of this product is exported (70%) where it is proven to be a cost competitive alternative. This industry provides experience in manufacturing and reliability in fielded systems that will serve as the basis for extrapolating growth to larger-scale installations and utility systems. The largest part of the National Photovoltaic Program budget supports assisting industry in advancing manufacturing technology and stimulating applications to reduce cost and expand the evolving industry. A growing segment of society looks to photovoltaics as an alternative that may be needed to replace conventional electric generating capacity. The grand challenge for photovoltaics is to make the technology economically competitive for large scale electric power generation before real or perceived evidence of environmental damage from conventional sources dictates its use at economically disruptive costs.

  10. Spacecraft Charging Technology Conference (9th) Held in Tsukuba, Japan on 4-8 April 2005. Book of Abstracts

    Science.gov (United States)

    2005-04-01

    8M2-585-8655 FAX: +8142-583-5119 E-mail : fuiii@tmit.ac.jp Haruki Takegahara Tokyo Metropolitan Institute of Technology Kohichiro OYAMA...DESIGN of SATELLITE SYSTEMS against SPACECRAFT CHARGING Noriyoshi Onodera, Yoichi Murakami , Hideaki Koakutsu Mitsubishi Electric Corporation Phone

  11. Proceedings of the Tenth Annual National Conference on Ada Technology. Held in Arlington, VA, on February 24-28, 1992

    Science.gov (United States)

    1992-02-01

    and a dynamic model- Both of these models are mmo=tato thereviewand mainmenance ofasoftwa=sysem The dynamic model, however, is te only one . Deutsch ...verbs) and "Zarf’ ( adverbs ) along with 10th Annual National Conference on ADA Technology 1992 77 their relationship to the objects in the The

  12. Summary memorandum: EPRI (Electric Power Research Institute) copper indium diselenide scoping workshop

    Energy Technology Data Exchange (ETDEWEB)

    Morel, D.L. (University of South Florida, Tampa, FL (USA). Dept. of Electrical Engineering); Peterson, T.M. (Electric Power Research Inst., Palo Alto, CA (USA))

    1991-02-01

    This report reviews the proceedings and follow-up discussions of an EPRI workshop held in Chicago on March 22--23, 1990. The workshop carefully assessed the key R D issues facing Copper Indium Diselenide (CIS) technology and provided EPRI with a basis for deciding whether or not it should play a role in addressing them. The workshop began by reviewing CIS' recent history and technical progress. The participants, who represented a broad cross-section of the CIS R D community, then identified and tried to prioritize its important long-term R D needs. They agreed that most of the needed research is now addressed, but not optimally supported. They found three broad research categories that they agreed were central to advancing the technology: characterization of photovoltaic mechanisms, characterization and development of deposition processes, and development of novel alloys.

  13. Radiation effects on materials in high-radiation environments: A workshop summary

    Science.gov (United States)

    Weber, W. J.; Mansur, L. K.; Clinard, F. W.; Parkin, D. M.

    1991-08-01

    A workshop on Radiation Effects on Materials in High-Radiation Environments was held in Salt Lake City, Utah (USA) from August 13 to 15, 1990 under the auspices of the Division of Materials Sciences, Office of Basic Energy Sciences, US Department of Energy. The workshop focused on ceramics, alloys, and intermetallics and covered research needs and capabilities, recent experimental data, theory, and computer simulations. It was concluded that there is clearly a continuing scientific and technological need for fundamental knowledge on the underlying causes of radiation-induced property changes in materials. Furthermore, the success of many current and emerging nuclear-related technologies critically depend on renewed support for basic radiation-effects research, irradiation facilities, and training of scientists. The highlights of the workshop are reviewed and specific recommendations are made regarding research needs.

  14. PREFACE: 7th International Workshop on the Dark Side of The Universe (DSU 2011)

    Science.gov (United States)

    Zhou, Yu-Feng

    2012-09-01

    The seventh international workshop 'The Dark Side of the Universe (DSU 2011)' was organized by The Kavli Institute for Theoretical Physics China (KITPC), from 26-30 September 2011 in Beijing. DSU 2011 is a continuation of DSU workshops previously held in Seoul (2005), Madrid (2006), Minnesota (2007), Cairo (2008), Melbourne (2009) and Leon (2010). The workshop was associated with the KTIPC program 'Dark matter and new physics', 21 September-6 November, 2011. The topics of the workshop include: dark matter candidates and theory, direct, indirect and accelerator dark matter searches, baryogenesis, new physics beyond the standard model, the origin of dark energy, experimental aspects of dark energy, nonstandard cosmology and astroparticle physics and Ultra hight energy cosmic rays etc. The workshop attracted more than 130 participants from more than ten countries and regions. The talks presented at the workshop can be downloaded from the website http://kitpc.itp.ac.cn/dsu2011. The workshop is financially supported by the Chinese Academy of Sciences, the National Science Foundation China (NSFC), and the China Center of Advance Science and Technology (CCAST). Conference photograph

  15. Encouraging Minority Students to Pursue Science, Technology, Engineering and Math Careers. A Briefing before the United States Commission on Civil Rights Held in Washington, D.C. Briefing Report

    Science.gov (United States)

    US Commission on Civil Rights, 2010

    2010-01-01

    The Commission held a briefing entitled, "Encouraging Minority Students to Pursue Science, Technology, Engineering and Math Careers." In particular, the Commission examined why minority college students who begin their college studies intending to major in science, technology, engineering or math (STEM) leave these disciplines in disproportionate…

  16. STREAM2016: Streaming Requirements, Experience, Applications and Middleware Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Fox, Geoffrey [Indiana Univ., Bloomington, IN (United States); Jha, Shantenu [Rutgers Univ., New Brunswick, NJ (United States); Ramakrishnan, Lavanya [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2016-10-01

    The Department of Energy (DOE) Office of Science (SC) facilities including accelerators, light sources and neutron sources and sensors that study, the environment, and the atmosphere, are producing streaming data that needs to be analyzed for next-generation scientific discoveries. There has been an explosion of new research and technologies for stream analytics arising from the academic and private sectors. However, there has been no corresponding effort in either documenting the critical research opportunities or building a community that can create and foster productive collaborations. The two-part workshop series, STREAM: Streaming Requirements, Experience, Applications and Middleware Workshop (STREAM2015 and STREAM2016), were conducted to bring the community together and identify gaps and future efforts needed by both NSF and DOE. This report describes the discussions, outcomes and conclusions from STREAM2016: Streaming Requirements, Experience, Applications and Middleware Workshop, the second of these workshops held on March 22-23, 2016 in Tysons, VA. STREAM2016 focused on the Department of Energy (DOE) applications, computational and experimental facilities, as well software systems. Thus, the role of “streaming and steering” as a critical mode of connecting the experimental and computing facilities was pervasive through the workshop. Given the overlap in interests and challenges with industry, the workshop had significant presence from several innovative companies and major contributors. The requirements that drive the proposed research directions, identified in this report, show an important opportunity for building competitive research and development program around streaming data. These findings and recommendations are consistent with vision outlined in NRC Frontiers of Data and National Strategic Computing Initiative (NCSI) [1, 2]. The discussions from the workshop are captured as topic areas covered in this report's sections. The report

  17. Proceedings of Japan-Germany Workshop of Bioremediation; Nichidoku bio remediation workshop hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-04

    This is a proceedings of Japan-Germany Workshop on Bioremediation held on December 4 and 5, 1995. The keynote lectures include `Environmental preservation using biotechnology` by Prof. Karube of University of Tokyo, and `Environmental technology in Germany: status, achievements, and problems` by Prof. R.D.Schmid of University of Stuttgart. In the oral session, 7 papers are presented in the microbiological aspects of bioremediation, 10 papers in the environmental monitoring, and 6 papers in the engineering aspects of bioremediation. This workshop was sponsored by the German Federal Ministry for Education, Science and Technology, New Energy and Industrial Technology Development Organization, and Research Institute of Innovative Technology for the Earth. According to the lecture by Prof. Karube, key technologies for the environmental preservation include biotechnologies, such as the culture of fine algae with high CO2 concentration resistant properties using a solar light condenser, production of effective substances from CO2, and production of organic fertilizer from the sediments of lakes and sea. 19 refs., 12 figs., 3 tabs.

  18. Global biosurveillance: enabling science and technology. Workshop background and motivation: international scientific engagement for global security

    Energy Technology Data Exchange (ETDEWEB)

    Cui, Helen H [Los Alamos National Laboratory

    2011-01-18

    Through discussion the conference aims to: (1) Identify core components of a comprehensive global biosurveillance capability; (2) Determine the scientific and technical bases to support such a program; (3) Explore the improvement in biosurveillance to enhance regional and global disease outbreak prediction; (4) Recommend an engagement approach to establishing an effective international community and regional or global network; (5) Propose implementation strategies and the measures of effectiveness; and (6) Identify the challenges that must be overcome in the next 3-5 years in order to establish an initial global biosurveillance capability that will have significant positive impact on BioNP as well as public health and/or agriculture. There is also a look back at the First Biothreat Nonproliferation Conference from December 2007. Whereas the first conference was an opportunity for problem solving to enhance and identify new paradigms for biothreat nonproliferation, this conference is moving towards integrated comprehensive global biosurveillance. Main reasons for global biosurveillance are: (1) Rapid assessment of unusual disease outbreak; (2) Early warning of emerging, re-emerging and engineered biothreat enabling reduced morbidity and mortality; (3) Enhanced crop and livestock management; (4) Increase understanding of host-pathogen interactions and epidemiology; (5) Enhanced international transparency for infectious disease research supporting BWC goals; and (6) Greater sharing of technology and knowledge to improve global health.

  19. Proceedings of the flexible, midsize gas turbine program planning workshop

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The US Department of Energy (DOE) and the California Energy Commission (CEC) held a program planning workshop on March 4--5, 1997 in Sacramento, California on the subject of a flexible, midsize gas turbine (FMGT). The workshop was also co-sponsored by the Electric Power Research Institute (EPRI), the Gas Research Institute (GRI), the Gas Turbine Association (GTA), and the Collaborative Advanced Gas Turbine Program (CAGT). The purpose of the workshop was to bring together a broad cross section of knowledgeable people to discuss the potential benefits, markets, technical attributes, development costs, and development funding approaches associated with making this new technology available in the commercial marketplace. The participants in the workshop included representatives from the sponsoring organizations, electric utilities, gas utilities, independent power producers, gas turbine manufacturers, gas turbine packagers, and consultants knowledgeable in the power generation field. Thirteen presentations were given on the technical and commercial aspects of the subject, followed by informal breakout sessions that dealt with sets of questions on markets, technology requirements, funding sources and cost sharing, and links to other programs.

  20. The 2001 activities and the 3rd workshop of the human resources development project in FNCA

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    In 1999, the Project for Human Resources Development (HRD) was initiated as defined in the framework of the Forum for Nuclear Cooperation in Asia (FNCA), organized by the Atomic Energy Commission of Japan. The objective of the HRD Project is to solidify the foundation of technologies for nuclear development and utilization in Asia by promoting human resources development in Asian countries. In the Project are two kinds of activity; In-workshop activity and Outside-of-workshop activity. The 3rd Workshop on Human Resources Development in the Nuclear Field was held on October 29 to November 1, at the Nuclear Training Center of KAERI. Participating countries were China, Indonesia, Republic of Korea, Japan, Malaysia, the Philippines, Thailand, and Vietnam. The secretariat for the Human Resources Development Project is provided by the Nuclear Training Center of the Korea Atomic Energy Research Institute and the Nuclear Technology and Education Center of the Japan Atomic Energy Research Institute. This report consists of presentation papers and materials at the Workshop as In-Workshop Activity, a document of project review on Human Resources Development for the fourth Coordinators Meeting of FNCA at Tokyo on March, 2002, a letter of proposal from the Project Leader of Japan to the project leaders of the participating countries, and training materials of participating countries as Outside-Workshop Activity. (author)

  1. Report on Final Workshop results

    DEFF Research Database (Denmark)

    Cavalli, Valentino; Dyer, John; Robertson, Dale;

    The SERENATE project held its Final Workshop in Bad Nauheim, Germany on 16-17 June 2003. More than ninety representatives of research and education networking organisations, national governments and funding bodies, network operators, equipment manufacturers and the scientific and education...

  2. Proceedings of the sixth international workshop on ceramic breeder blanket interactions

    Energy Technology Data Exchange (ETDEWEB)

    Noda, Kenji [ed.

    1998-03-01

    This report is the Proceedings of `the Sixth International Workshop on Ceramic Breeder Blanket Interactions` which was held as a workshop on ceramic breeders under Annex II of IEA Implementing Agreement on a Programme of Research and Development on Fusion Materials, and Japan-US Workshop 97FT4-01. This workshop was held in Mito city, Japan on October 22-24, 1997. About forty experts from EU, Japan, USA, and Chile attended the workshop. The scope of the workshop included the following: (1) fabrication and characterization of ceramic breeders, (2) properties data for ceramic breeders, (3) tritium release characteristics, (4) modeling of tritium behavior, (5) irradiation effects on performance behavior, (6) blanket design and R and D requirements, (7) hydrogen behavior in materials, and (8) blanket system technology and structural materials. In the workshop, information exchange was performed for fabrication technology of ceramic breeder pebbles in EU and Japan, data of various properties of Li{sub 2}TiO{sub 3}, tritium release behavior of Li{sub 2}TiO{sub 3} and Li{sub 2}ZrO{sub 3} including tritium diffusion, modeling of tritium release from Li{sub 2}ZrO{sub 3} in ITER condition, helium release behavior from Li{sub 2}O, results of tritium release irradiation tests of Li{sub 4}SiO{sub 4} pebbles in EXOTIC-7, R and D issues for ceramic breeders for ITER and DEMO blankets, etc. The 23 of the papers are indexed individually. (J.P.N.)

  3. Address to the international workshop on greenhouse gas mitigation, technologies and measures

    Energy Technology Data Exchange (ETDEWEB)

    Kant, A.

    1996-12-31

    The Netherlands has a long history in combatting natural forces for it`s mere survival and even creation. Around half of the country was not Yet existent around 2000 years ago: it was still below sea level that time. Building dikes and the discovery of eolic energy applied in windmills, allowing to pump water from one side of the dike to the other, are technologies that gradually shaped the country into its current form, a process that continues to materialize till the present day. Water has not always been an enemy of the country. In the Hundred Year War with Spain, during which the country was occupied territory for most of the time, the water was used to drive the Spanish armies from the country. As large parts are well below sea level breaking the dikes resulted in flooding the country which made the armoury of the Spanish army useless. In this way they had to give up the siege of several major Dutch cities that time. These events marked the gradual liberation of the Dutch territory. Consequently, in the discussion on adaption and prevention of the greenhouse effect the Netherlands has a clear stand. The greenhouse effect will occur anyway, even if countries deploy all possible counter measures at once. So their aim is to prevent the occurrence of the greenhouse effect to the highest extent possible, and to protect the most vulnerable areas meanwhile, especially the coastal zones. In order to reach these goals the Dutch government has established a Joint Implementation Experimental Programme in accordance with the provisions made by the Conference of Parties in Berlin (1995).

  4. PREFACE: 14th Micromechanics Europe Workshop (MME'03)

    Science.gov (United States)

    Wolffenbuttel, R. F.

    2004-09-01

    This special issue of the Journal of Micromechanics and Microengineering is devoted to the 14th Micromechanics Europe Workshop (MME'03), which was held at Delft University of Technology, The Netherlands on 2-4 November 2003. Papers have been selected from this workshop for presentation in this special issue. After a careful review by the MME'03 programme committee, 53 submissions were selected for poster presentation at the workshop in addition to 6 invited presentations. These covered the many aspects of our exciting field: technology, simulation, system design, fabrication and characterization in a wide range of applications. These contributions confirm a trend from technology-driven towards application-driven technological research. This trend has become possible because of the availability of mature fabrication technologies for micromechanical structures and is reflected by the presentations of some of the invited speakers. There were invited lectures about applications in the medical field, automotive and copiers, which provide evidence of the relevance of our work in society. Nevertheless, development of technologies rightfully remains a core activity of this workshop. This applies to both the introduction of new technologies, as was reflected by invited presentations on new trends in RIE and nanotechnology, and the addressing of manufacturing issues using available techniques, which will be demonstrated to be crucial in automotive applications. Out of these 59 papers 21 have been selected for presentation in this special issue. Since the scope of the workshop is somewhat wider than that of the journal, selection was based not only on the quality of the work, but also on suitability for presentation in the journal. Moreover, at the workshop, student presentation of research at an early stage was strongly encouraged, whereas publication of work in this journal requires a more advanced level. I would like to express my appreciation for the outstanding efforts

  5. The CLEAN Workshop Series: Promoting Effective Pedagogy for Teaching Undergraduate Climate Science

    Science.gov (United States)

    Kirk, K. B.; Bruckner, M. Z.; Manduca, C. A.; Buhr, S. M.

    2012-12-01

    To prepare students to understand a changing climate, it is imperative that we equip educators with the best possible tools and methods for reaching their audience. As part of the Climate Literacy and Energy Awareness Network (CLEAN) professional development efforts, two workshops for undergraduate faculty were held in 2012. These workshops used a variety of activities to help faculty learn about recent climate research, take part in demonstrations of successful activities for teaching climate topics, and collaborate to create new teaching materials. The workshops also facilitated professional networking among participants. Both workshops were held online, eliminating the need for travel, encouraging participants without travel funds to attend, and allowing international collaborations and presentations. To create an authentic experience, the workshop used several technologies such as the Blackboard Collaborate web conferencing platform, SERC's web-based collaboration tools and online discussion threads, and conference calls. The workshop Communicating Climate Science in the Classroom, held in April 2012, explored practices for communicating climate science and policy in the classroom and provided strategies to improve student understanding of this complex and sensitive topic. Workshop presentations featured public opinion research on Americans' perceptions of climate change, tactics for identifying and resolving student misconceptions, and methods to address various "backfire effects" that can result from attempts to correct misinformation. Demonstrations of teaching approaches included a role-playing simulation of emissions negotiations, Princeton's climate stabilization wedges game, and an activity that allows students to use scientific principles to tackle misinformation. The workshop Teaching Climate Complexity was held in May 2012. Teaching the complexities of climate science requires an understanding of many facets of the Earth system and a robust pedagogic

  6. Summary Report for National Aeronautics Space Administration (NASA) and Centro Para Prevencao da Poluicao (C3P) 2011 International Workshop on Environment and Alternative Energy

    Science.gov (United States)

    Greene, Brian

    2011-01-01

    The C3P &. NASA International Workshop on Environment and Alternative Energy was held on November 15-18, 2011 at the European Space Agency (ESA)'s Research and Technology Centre (ESTEC) in Noordwijk, The Netherlands. The theme of the workshop was "Global Collaboration in Environmental and Alternative Energy Strategies". The workshop was held at ESTEC's conference center. More than 110 individuals from eleven countries attended the workshop. For the first time since the inception of NASA-C3P workshops, a full day was dedicated to a student session. Fifteen students from around the globe gave oral presentations along with poster displays relating to the latest technologies in environmental and alternative energy strategies. Judges from NASA, C3P and ESA awarded plaques to the top three students. In addition to the students, thirty eight U.S. and international subject matter experts presented on the following general environmental-related topics: (1) Hazardous materials management and substitution in support of space operations (2) Emerging renewable and alternative energy technologies (3) Sustainable development and redevelopment (4) Remediation technologies and strategies The workshop also included a panel discussion on the topic of the challenges of operating installations across borders. Throughout the workshop, attendees heard about the scope of environmental and energy challenges that industry and governments face. They heard about technologies for increasing energy efficiency and increasing use of renewable energy. They learned about ways companies and government agencies are using materials, processes, goods and services in a manner more respectful with the environment and in compliance with health and safety rules. The concept of partnerships and their inherent benefits was evidenced throughout the workshop. Partnering is a key aspect of sustainability because sustainable development is complicated. Through formal presentations and side discussions, attendees

  7. The critical steps for successful research: The research proposal and scientific writing: (A report on the pre-conference workshop held in conjunction with the 64(th) annual conference of the Indian Pharmaceutical Congress-2012).

    Science.gov (United States)

    Balakumar, Pitchai; Inamdar, Mohammed Naseeruddin; Jagadeesh, Gowraganahalli

    2013-04-01

    An interactive workshop on 'The Critical Steps for Successful Research: The Research Proposal and Scientific Writing' was conducted in conjunction with the 64(th) Annual Conference of the Indian Pharmaceutical Congress-2012 at Chennai, India. In essence, research is performed to enlighten our understanding of a contemporary issue relevant to the needs of society. To accomplish this, a researcher begins search for a novel topic based on purpose, creativity, critical thinking, and logic. This leads to the fundamental pieces of the research endeavor: Question, objective, hypothesis, experimental tools to test the hypothesis, methodology, and data analysis. When correctly performed, research should produce new knowledge. The four cornerstones of good research are the well-formulated protocol or proposal that is well executed, analyzed, discussed and concluded. This recent workshop educated researchers in the critical steps involved in the development of a scientific idea to its successful execution and eventual publication.

  8. The critical steps for successful research: The research proposal and scientific writing: (A report on the pre-conference workshop held in conjunction with the 64th annual conference of the Indian Pharmaceutical Congress-2012)

    Science.gov (United States)

    Balakumar, Pitchai; Inamdar, Mohammed Naseeruddin; Jagadeesh, Gowraganahalli

    2013-01-01

    An interactive workshop on ‘The Critical Steps for Successful Research: The Research Proposal and Scientific Writing’ was conducted in conjunction with the 64th Annual Conference of the Indian Pharmaceutical Congress-2012 at Chennai, India. In essence, research is performed to enlighten our understanding of a contemporary issue relevant to the needs of society. To accomplish this, a researcher begins search for a novel topic based on purpose, creativity, critical thinking, and logic. This leads to the fundamental pieces of the research endeavor: Question, objective, hypothesis, experimental tools to test the hypothesis, methodology, and data analysis. When correctly performed, research should produce new knowledge. The four cornerstones of good research are the well-formulated protocol or proposal that is well executed, analyzed, discussed and concluded. This recent workshop educated researchers in the critical steps involved in the development of a scientific idea to its successful execution and eventual publication. PMID:23761709

  9. Final Technical Report: Electronic Structure Workshop (ES13)

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Shiwei [College of William and Mary, Williamsburg, VA (United States)

    2015-02-26

    The 25th Annual Workshop on Recent Developments in Electronic Structure Methods (ES2013) was successfully held at the College of William & Mary in Williamsburg VA on June 11-14, 2013. The workshop website is at http://es13.wm.edu/ , which contains updated information on the workshop and a permanent archive of the scientific contents. DOE's continued support has been instrumental to the success of the workshop.

  10. Repair, Evaluation, Maintenance, and Rehabilitation Research Program: Proceedings of REMR Workshop on New Remedial Seepage Control Methods for Embankment-Dams and Soil Foundations Held in Vicksburg, Mississippi on 21-22 October 1986.

    Science.gov (United States)

    1988-01-01

    Proceedings nf REMR Workshop on New Remedial Seepage Control methods for Embankment-Dams and Soil Forindarions 12 PERSONA , AUTH~OR(S) Perry, Edward B., Compiler...I eci wi th ouite d’.versit ied soil-types lvii, ak r:oMixed s trata of crregula’. di-ensions to a depth of app-roxi- rat’ aVn1e thle tipper sun’. ace

  11. Proceedings of the Annual Military Librarians’ Workshop (28th): Cost of Library Operations 1984 and Beyond Held at Panama City Beach, Florida on 17-19 October 1984

    Science.gov (United States)

    1985-10-01

    1985 EXECUTIVE BOARD Paul Klinefelter , Deferie Technical Information Center, Chairman Tony Dakan, Air Force Manpower and Personnel Center Betty L. Fox...Information Service Branch, who say that this will be one of the best workshops in the 28-year history of MLW. Some of thore prognosticators are here this...Construction Act for its whole 21 or 22 years of history is less than the cost of one old aircraft carrier. I am not talking about the new B-i that

  12. International Workshop on Diagnostics for ITER

    CERN Document Server

    Gorini, Giuseppe; Sindoni, Elio

    1996-01-01

    This book of proceedings collects the papers presented at the Workshop on Diagnostics for ITER, held at Villa Monastero, Varenna (Italy), from August 28 to September 1, 1995. The Workshop was organised by the International School of Plasma Physics "Piero Caldirola. " Established in 1971, the ISPP has organised over fifty advanced courses and workshops on topics mainly related to plasma physics. In particular, courses and workshops on plasma diagnostics (previously held in 1975, 1978, 1982, 1986, and 1991) can be considered milestones in the history of this institution. Looking back at the proceedings of the previous meetings in Varenna, one can appreciate the rapid progress in the field of plasma diagnostics over the past 20 years. The 1995 workshop was co-organised by the Istituto di Fisica del Plasma of the National Research Council (CNR). In contrast to previous Varenna meetings on diagnostics, which have covered diagnostics in present-day tokamaks and which have had a substantial tutorial component, the 1...

  13. Report of the Stigma Research Workshop for the development of scientific consensus papers and field guidelines on health-related stigma, held in Amsterdam, the Netherlands from 11-14 october 2010.

    Science.gov (United States)

    Voorend, Carlijn G N; Van Brakel, Wim H; Cross, Hugh; Augustine, Valsa; Ebenso, Bassey

    2011-06-01

    Summary In concurrence with the broad body of literature published on health-related stigma, there is a need for practical field guidance to contribute to the fight against leprosy-related stigma and discrimination. To this end, much can be gained by considering the accumulated knowledge and learned from experience with different stigmatising conditions; primarily HIV/AIDS, disability, tuberculosis, and mental health. Therefore a Stigma Research Workshop was organised from 11-14 October in Amsterdam, The Netherlands. The primary aim of the workshop was to produce scientific papers and field guidelines that could be used to target actions against health-related stigma and discrimination. Keynote presentations were offered by scientists and professionals from different health domains who shared their knowledge, experiences and research findings regarding health-related stigma. Group work was subsequently conducted to work towards agreed outputs on four different themes: i.e. research priorities, measurement, interventions, and counselling. The spectrum of expertise present enabled an interdisciplinary and inter-profession sharing of knowledge and practices. This resulted in the commencement of consensus papers and field guidelines related to the four themes. An evaluation by participants concluded that the workshop had been an informative and worthwhile activity that will strengthen the fight against stigma.

  14. 1st International Workshop on Multi-sensorial Approaches to Human-Food Interaction (Workshop Summary)

    NARCIS (Netherlands)

    Nijholt, Anton; Velasco, Carlos; Karunanayaka, Kasun; Huisman, Gijs

    2016-01-01

    This is an introductory paper for the workshop entitled ‘MultiSensorial Approaches to Human-Food Interaction’ held at ICMI 2016, which took place the 16th of November, 2016 in Tokyo, Japan. Here we discuss our objectives and the relevance of the workshop, and summarize the key contributions of the p

  15. Workshop on measurement quality assurance for ionizing radiation: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Heath, J.A.; Swinth, K.L. [comps.

    1993-12-31

    This workshop was held to review the status of secondary level calibration accreditation programs, review related measurement accreditation programs, document lessons learned, and to present changes in programs due to new national priorities involving radioactivity measurements. Contents include: fundamentals of measurement quality assurance (MQA), standards for MQA programs; perspectives and policies; complete MQA programs; future MQA programs; QA/QC programs--radioactivity; QA/QC programs--dosimetry; laboratory procedures for QA/QC; in-house control of reference dosimetry laboratories; in-house controls of radioactivity laboratories; and poster session. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

  16. Proceedings of the ocean energy information dissemination workshop, December 1979

    Energy Technology Data Exchange (ETDEWEB)

    Petty, D.

    1980-04-01

    The workshop was held to discuss the status of marketing ocean energy information and to develop an understanding of information needs and how to satisfy them. Presentations were made by the Solar Energy Research Institute (SERI) staff and media consultants about the effective use of audio-visual and print products, the mass media, and audience needs. Industry and government representatives reported on current efforts in each of their communication programs and outlined future plans. Four target audiences (DOE contractors, researchers, influencers, and general public) were discussed with respect to developing priorities for projects to enhance the commercialization of ocean energy technology.

  17. Making Use of Language Technologies to Provide Formative Feedback

    NARCIS (Netherlands)

    Van Rosmalen, Peter; Berlanga, Adriana

    2009-01-01

    Van Rosmalen, P., & Berlanga, A. J. (2009). Making Use of Language Technologies to Provide Formative Feedback. Paper presented at the Natural Language Processing in Support of Learning Workshop held in conjunction with the International Conference on Artificial Intelligence in Education (AIED2009).

  18. Experts call for increasing support to superconducting technology studies

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ The Chinese government should launch a major research project on superconducting technology, as it is of significant importance for ensuring national energy security, raising energy efficiency and reducing emissions, urged experts at a workshop held at the CAS Institute of Electronic Engineering on 6 and 7 March in Beijing.

  19. Enabling instrumentation and technology for 21st century light sources

    Energy Technology Data Exchange (ETDEWEB)

    Byrd, J.M.; Shea, T.J.; Denes, P.; Siddons, P.; Attwood, D.; Kaertner, F.; Moog, L.; Li, Y.; Sakdinawat, A.; Schlueter, R.

    2010-06-01

    We present the summary from the Accelerator Instrumentation and Technology working group, one of the five working groups that participated in the BES-sponsored Workshop on Accelerator Physics of Future Light Sources held in Gaithersburg, MD September 15-17, 2009. We describe progress and potential in three areas: attosecond instrumentation, photon detectors for user experiments, and insertion devices.

  20. Women in Astronomy Workshop Report

    CERN Document Server

    Brough, Sarah; Brooks, Kate; Hopkins, Andrew; Maddison, Sarah

    2011-01-01

    Here we report on the Women in Astronomy Workshop (http://asawomeninastronomy.org/meetings/wia2011/), which was held on 13 May 2011 in Sydney, Australia. The workshop was organised by the Astronomical Society of Australia's Chapter on Women in Astronomy, to discuss some of the issues that face women in astronomy and make recommendations to help support the success of women in Australian astronomy but came to broader conclusions that have value for the whole astronomical community. The workshop consisted of four sessions, with presentations by invited speakers on demographics, leadership, varied career paths, and how institutions & individuals can help. The workshop ended with a discussion panel that summarised the day's debate and presented a list of recommendations for the Australian astronomical community (both individuals and institutions) that are provided in this report.

  1. Near Surface Ocean Experimental Technology Workshop Proceedings Held at Naval Ocean Research and Development Activity, NSTL Station, Mississippi on 6-8 November 1979,

    Science.gov (United States)

    1980-02-01

    Lithium - Thionyl Chloride Batteries - Past...Thesis, University of California, San Diego. 203 __ _ __ _A LITHIUM - THIONYL CHLORIDE BATTERIES - PAST, PRESENT AND FUTURE OJoseph F. McCartney, Naval... Lithium based batteries have the highest theoretical energy density of known battery types. Of the lithium batteries , the lithium - thionyl chloride

  2. Proceedings of the Portable Common Interface Set (PCIS) Workshop: Interface Technology Analyses (ITA2) (2nd) Held in Redondo Beach, California on 3-7 June 1991

    Science.gov (United States)

    1991-10-01

    Mappings 0 ESF 0 EAST 0 ATIS 0 Entreprise 2 o Softbench .. o c--rc MG/STDS/ 115 ECMA TC33 TGRM: - TIMETABLE 0 Next TGRM Meeting: 26th June 1991...Tax->comnputetax (salary); f += Finance ->compute benefit (salary); N=C Ix~rm~ antcAI Sr.st~af Ociabee 1990 -446" sm~tM amenywWTeohrapCOWpatim PCIS 2

  3. Software Technology for Adaptable Reliable Systems (STARS) Workshop Held at the Naval Research Laboratory, Washington, DC on April 9-12 1985

    Science.gov (United States)

    1985-01-01

    abstraction reuser certainly needs to know when these rela- category (or categories) does it look for? In addi- tionships are violated. For example, using the...reusability this is cer- tainly a promising feature, that cannot currentlybe accomplished with Ada. In addition this The issue of how much a reuser

  4. Proceedings of the Complex Systems Engineering Synthesis and Assessment Technology Workshop Held in Silver Spring, Maryland on 20-24 July 1992

    Science.gov (United States)

    1992-07-24

    Warfare Center; Dr. provides the meanings of the factor. The source Carl Schmiedekamp of Naval Air Warfare Center; provides the reference of the...bricks. If they were regular, we analyzed the organizational flow of the detection of inappropriate patterns would forms, or of capital authorizations, or...Memoary Sopas: 3.6 1 Main Mem"Ory Ititealldid: TBS 3 6 1 Main Memory Maxr Addreasble TOS 3.6.2 CPU Caslie Memnory Size Tas 3.6.2 Disk Memory Max Addreiss

  5. Proceedings of the Annual Military Librarians’ Workshop (27th) on Space Planning and Today’s Technologies Held at Reston, Virginia on 12-14 October 1983

    Science.gov (United States)

    1983-10-14

    Betty L. Fox Chief, Technical Library Division EXECLTIVE BOARD Mr. Paul Klinefelter , Defense Technical Information Center, Chairman Mr. Tony Dakan, Air...scope of the program includes: o developing a personnel history of the 235 atmospheric testsj o compiling a roster of DOD personnel involved in the...34 *4• 4". . . .._𔃾 4",’ Mr. Paul Klinefelter Director, User Services Defense Technical information Center Cameron Station Alexandria, VA 22314 Mr

  6. Proceedings of the International Workshop/Symposium on Ice Drilling Technology (2nd) Held at Calgary, Alberta, Canada on 30-31 August 1982.

    Science.gov (United States)

    1984-12-01

    5.50 m. sIth aln arta oft 0.35 mm for each The base of the tower rests on a ball ,’idiwt ,r. It w,’tis 27 kg/100 m. The joint fixed to a 0.90 m square...on most of the lifting power. HOSES BRAKE DRUM -7 SPRING SCALE HOTI COLD : WATER WATER igure 5. An illustration of the brake drum that is used to

  7. HG2006 Workshop on High-Gradient Radio Frequency

    CERN Multimedia

    2006-01-01

    Meeting to be held at CERN on 25-27 September 2006 in Room 40/S2-B01 (Building 40). The objective of the workshop is to bring the high-gradient RF community together to present and discuss recent theoretical and experimental developments. Significant progress has recently been made in understanding the basic physics of rf breakdown and developing techniques for achieving higher gradients. This workshop should contribute to maintaining these efforts and to promoting contacts and collaboration. The scientific programme will be organized in half day sessions dedicated to: High-gradient rf experimental results Theory and computation High-gradient technology, materials and processing Specialized experiments on related high-gradient or high-power phenomenon like dc discharge and pulsed surface heating Reports from collaborations and projects. Each session will consist of selected presentations followed by a dedicated discussion. Information about the meeting and participant registration is available at http...

  8. Automated Vehicle Policy and Regulation: A State Perspective Workshop: Summary

    Energy Technology Data Exchange (ETDEWEB)

    Young, Stanley E. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Levine, Aaron [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-06-01

    A workshop held on May 18, 2016, at the University of Maryland focused on key principles that should govern state policy decisions intended to ensure the safe operation of autonomous vehicles (AVs). The patchwork approach taken by early state adopters had primarily addressed only testing of these vehicles. As uncertainties in technology and business models play out, and in the absence of more suitable policies and regulations, states are relying on laws created for conventional vehicles to govern AV operations. The workshop addressed these challenges with three panel discussions that examined the underpinnings of policy development, factors affecting policy decisions, and the ultimate impact of AVs in a number of areas, including economic competitiveness; quality of mobility, particularly for disabled community; and energy use and emissions.

  9. The second workshop of neutron science research program

    Energy Technology Data Exchange (ETDEWEB)

    Yasuda, Hideshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Tone, Tatsuzo [eds.

    1997-11-01

    The Japan Atomic Energy Research Institute(JAERI) has been proposing the Neutron Science Research Program to explore a broad range of basic research and the nuclear technology including actinide transmutation with use of powerful spallation neutron sources. For this purpose, the JAERI is conducting the research and development of an intense proton linac, the development of targets, as well as the conceptual design study of experimental facilities required for applications of spallation neutrons and secondary particle beams. The Special Task Force for Neutron Science Initiative was established in May 1996 to promote aggressively and systematically the Neutron Science Research Program. The second workshop on neutron science research program was held at the JAERI Tokai Research Establishment on 13 and 14 March 1997 for the purpose of discussing the results obtained since the first workshop in March 1996. The 27 of the presented papers are indexed individually. (J.P.N.)

  10. The second workshop of neutron science research program

    Energy Technology Data Exchange (ETDEWEB)

    Yasuda, Hideshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Tone, Tatsuzo [eds.

    1997-11-01

    The Japan Atomic Energy Research Institute(JAERI) has been proposing the Neutron Science Research Program to explore a broad range of basic research and the nuclear technology including actinide transmutation with use of powerful spallation neutron sources. For this purpose, the JAERI is conducting the research and development of an intense proton linac, the development of targets, as well as the conceptual design study of experimental facilities required for applications of spallation neutrons and secondary particle beams. The Special Task Force for Neutron Science Initiative was established in May 1996 to promote aggressively and systematically the Neutron Science Research Program. The second workshop on neutron science research program was held at the JAERI Tokai Research Establishment on 13 and 14 March 1997 for the purpose of discussing the results obtained since the first workshop in March 1996. The 27 of the presented papers are indexed individually. (J.P.N.)

  11. Proceedings of the CANMET-CARI-European Commission : Environmentally clean technologies for sustainable production and consumption workshop 2003

    Energy Technology Data Exchange (ETDEWEB)

    Dutrizac, J.E.; Negre, P.; Paquette, L.A.; Solozabal, R. (eds.)

    2003-07-01

    This workshop was organized to provide a forum for major stakeholders of the European Commission and Canada to discuss several European Commission funded projects dealing with the following 4 issues: (1) clean and sustainable processing, (2) clean industrial liquid effluents, (3) clean material recovery from waste, and (4) clean mining. There was also a plenary session entitled: clean production strategies. A chapter was devoted to the plenary session, as well as to each of the four project themes. Seven papers presented at this workshop were indexed separately for inclusion in this database. refs., tabs., figs.

  12. The Third ATLAS ROD Workshop

    CERN Multimedia

    Poggioli, L.

    A new-style Workshop After two successful ATLAS ROD Workshops dedicated to the ROD hardware and held at the Geneva University in 1998 and in 2000, a new style Workshop took place at LAPP in Annecy on November 14-15, 2002. This time the Workshop was fully dedicated to the ROD-TDAQ integration and software in view of the near future integration activities of the final RODs for the detector assembly and commissioning. More precisely, the aim of this workshop was to get from the sub-detectors the parameters needed for T-DAQ, as well as status and plans from ROD builders. On the other hand, what was decided and assumed had to be stated (like EB decisions and URDs), and also support plans. The Workshop gathered about 70 participants from all ATLAS sub-detectors and the T-DAQ community. The quite dense agenda allowed nevertheless for many lively discussions, and for a dinner in the old town of Annecy. The Sessions The Workshop was organized in five main sessions: Assumptions and recommendations Sub-de...

  13. Finding the UV-Visible Path Forward: Proceedings of the Community Workshop to Plan the Future of UV/Visible Space Astrophysics

    CERN Document Server

    Scowen, Paul A; Beasley, Matt; Ardila, David; Andersson, B-G; Apellániz, Jesús Maíz; Barstow, Martin; Bianchi, Luciana; Calzetti, Daniela; Clampin, Mark; Evans, Christopher J; France, Kevin; García, Miriam García; de Castro, Ana Gomez; Harris, Walt; Hartigan, Patrick; Howk, J Christopher; Hutchings, John; Larruquert, Juan; Lillie, Charles F; Matthews, Gary; McCandliss, Stephan; Polidan, Ron; Perez, Mario R; Rafelski, Marc; Roederer, Ian U; Sana, Hugues; Sanders, Wilton T; Schiminovich, David; Thronson, Harley; Tumlinson, Jason; Vallerga, John; Wofford, Aida

    2016-01-01

    We present the science cases and technological discussions that came from the workshop entitled "Finding the UV-Visible Path Forward" held at NASA GSFC June 25-26, 2015. The material presented outlines the compelling science that can be enabled by a next generation space-based observatory dedicated for UV-visible science, the technologies that are available to include in that observatory design, and the range of possible alternative launch approaches that could also enable some of the science. The recommendations to the Cosmic Origins Program Analysis Group from the workshop attendees on possible future development directions are outlined.

  14. [Fifth EVF HOW: Hands-on Workshop on Venous Disease (Limassol, Cyprus) 30 October - 1 November 2014].

    Science.gov (United States)

    Shaidakov, E V; Porembskaya, O Ya

    2015-01-01

    The fifth Hands-on Workshop on Venous Diseases of the European Venous Forum was held from October 30 to November 1, 2014 in Limassol, Cyprus. Leading specialists from European countries for three days delivered reports concerning modern trends in diagnosis and treatment of venous diseases. The participants of the hands-on workshop had a unique possibility to learn first-hand the latest recommendations concerning diagnosis and treatment of varicose disease, acute venous thromboses, post-thrombotic disease, to know about advanced technologies being just introduced into clinical practice.

  15. DTU climate change technologies. Recommendations on accelerated development and deployment of climate change technologies

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, Hans; Halsnaes, K. (Technical Univ. of Denmark, Risoe National Lab. for Sustainable Energy, System Analysis Div., Roskilde (Denmark)); Nielsen, Niels Axel; Moeller, J.S.; Hansen, Jakob Fritz; Froekjaer Strand, I. (Technical Univ. of Denmark, Kgs. Lyngby (Denmark))

    2009-09-15

    During 2009, the Technical University of Denmark (DTU) has held a number of international workshops for climate change. Participants came from industry, research institutions and government. The workshops focused on sustainable energy systems and climate change adaptation. The summary of conclusions and recommendations from the workshops constitutes a comprehensive set of technology tracks and recommended actions towards accelerated development and deployment of technology within these two key areas. The workshop process has led to three main conclusions. A. Radical changes are needed to develop sustainable energy systems. B. Tools and processes that climate-proof societal planning and management are needed in order to adapt to climate change. C. Partnerships concerning innovation and deployment (research, development and deployment) are required to meet time constraints.

  16. INDICO Workshop

    CERN Document Server

    CERN. Geneva; Fabbrichesi, Marco

    2004-01-01

    The INtegrated DIgital COnferencing EU project has finished building a complete software solution to facilitate the MANAGEMENT OF CONFERENCES, workshops, schools or simple meetings from their announcement to their archival. Everybody involved in the organization of events is welcome to join this workshop, in order to understand the scope of the project and to see demonstrations of the various features.

  17. PREFACE: EMAS 2013 Workshop: 13th European Workshop on Modern Developments and Applications in Microbeam Analysis

    Science.gov (United States)

    Llovet, Xavier, Dr; Matthews, Mr Michael B.; Brisset, François, Dr; Guimarães, Fernanda, Dr; Vieira, Professor Joaquim M., Dr

    2014-03-01

    This volume of the IOP Conference Series: Materials Science and Engineering contains papers from the 13th Workshop of the European Microbeam Analysis Society (EMAS) on Modern Developments and Applications in Microbeam Analysis which took place from the 12th to the 16th of May 2013 in the Centro de Congressos do Alfândega, Porto, Portugal. The primary aim of this series of workshops is to assess the state-of-the-art and reliability of microbeam analysis techniques. The workshops also provide a forum where students and young scientists starting out on a career in microbeam analysis can meet and discuss with the established experts. The workshops have a very specific format comprising invited plenary lectures by internationally recognized experts, poster presentations by the participants and round table discussions on the key topics led by specialists in the field. This workshop was organized in collaboration with LNEG - Laboratório Nacional de Energia e Geologia and SPMICROS - Sociedade Portuguesa de Microscopia. The technical programme included the following topics: electron probe microanalysis, future technologies, electron backscatter diffraction (EBSD), particle analysis, and applications. As at previous workshops there was also a special oral session for young scientists. The best presentation by a young scientist was awarded with an invitation to attend the 2014 Microscopy and Microanalysis meeting at Hartford, Connecticut. The prize went to Shirin Kaboli, of the Department of Metals and Materials Engineering of McGill University (Montréal, Canada), for her talk entitled ''Plastic deformation studies with electron channelling contrast imaging and electron backscattered diffraction''. The continuing relevance of the EMAS workshops and the high regard in which they are held internationally can be seen from the fact that 74 posters from 21 countries were on display at the meeting and that the participants came from as far away as Japan, Canada and the USA. A

  18. The Brief Introduction to "The 5th International Workshop on the Fundamental Research for Mitigation Earthquake Hazards" Held in Korea%中日美韩"地震减灾国际研讨会"简介

    Institute of Scientific and Technical Information of China (English)

    郑秀芬; 郑需要

    2006-01-01

    @@ 应韩国气象厅气象研究所的邀请, 中国地震局地球物理研究所的郑需要研究员和郑秀芬博士于2005年12月18日至23日期间, 赴韩国济州岛参加了由韩国气象厅气象研究所主办的第五届中、日、美、韩"地震减灾国际研讨会"(The 5th International Workshop on the Fundamental Research for Mitigation Earthquake Hazards).

  19. Proceedings: Joint DOE/NSF Workshop on flow of particulates and fluids

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-31

    These proceedings are the result of the Fifth DOR-NSF Workshop on fundamental research in the area of particulate two-phase flow and granular flow. The present collection of twenty contributions from universities and national laboratories is based on research projects sponsored by either the Department of Energy or the National Science Foundation. These papers illustrate some of the latest advances in theory, simulations, and experiments. The papers from the Workshop held September 29--October 1, 1993 have been separated into three basic areas: experiments, theory, and numerical simulations. A list of attendees at the workshop is included at the end of the proceedings. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  20. International workshop on chromosome 3. Final report, April 15, 1991--April 14, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Gemmill, R.M.

    1992-07-01

    The Second Workshop on Human Chromosome 3 was held on April 4--5, 1991 at Denver, Colorado. There were 43 participants representing 8 nations. The workshop participants reviewed the current state of the chromosome 3 map, both physical and genetic, and prepared lists of markers and cell lines to be made commonly available. These markers and cell lines should be incorporated into the mapping efforts of diverse groups to permit the integration of data and development of consensus maps at future workshops. Region specific efforts were described for sections of the chromosome harboring genes thought to be involved in certain diseases including Von Hippel-Lindau disease, 3p-syndrome, lung cancer and renal cancer. Selected papers have been processed separately for inclusion in the Energy Science and Technology Database.

  1. Summary of the First AIAA CFD High Lift Prediction Workshop (invited)

    Science.gov (United States)

    Rumsey, C. L.; Long, M.; Stuever, R. A.; Wayman, T. R.

    2011-01-01

    The 1st AIAA CFD High Lift Prediction Workshop was held in Chicago in June 2010. The goals of the workshop included an assessment of the numerical prediction capability of current-generation CFD technology/ codes for swept, medium/high-aspect ratio wings in landing/take-off (high lift) configurations. 21 participants from 8 countries and 18 organizations, submitted a total of 39 datasets of CFD results. A variety of grid systems (both structured and unstructured) were used. Trends due to flap angle were analyzed, and effects of grid family, grid density, solver, and turbulence model were addressed. Some participants also assessed the effects of support brackets used to attach the flap and slat to the main wing. This invited paper describes the combined results from all workshop participants. Comparisons with experimental data are made. A statistical summary of the CFD results is also included.

  2. Report on the Imaging Workshop for the Genomes to Life Program, April 16-18, 2002

    Energy Technology Data Exchange (ETDEWEB)

    Colson, STEVEN

    2003-08-04

    This report is a result of the Imaging Workshop for the Genomes to Life (GTL) program held April 16-19, 2002, in Charlotte, North Carolina. The meeting was sponsored by the Office of Biological and Environmental Research and the Office of Advanced Scientific Computing Research of the U.S. Department of Energy's (DOE) Office of Science. The purpose of the workshop was to project a broad vision for future needs and determine the value of imaging to GTL program research. The workshop included four technical sessions with plenary lectures on biology and technology perspectives and technical presentations on needs and approaches as they related to the following areas of the GTL program: (1) Molecular machines (protein complexes); (2) Intracellular and cellular structure, function, and processes; (3) Multicellular: Monoclonal and heterogeneous multicellular systems, cell-cell signaling, and model systems; and (4) Cells in situ and in vivo: Bacteria in the natural environment, microenvironment, and in vivo systems.

  3. Tribological Limitations in Gas Turbine Engines: A Workshop to Identify the Challenges and Set Future Directions

    Science.gov (United States)

    DellaCorte, Chris; Pinkus, Oscar

    2000-01-01

    The following report represents a compendium of selected speaker presentation materials and observations made by Prof O. Pinkus at the NASA/ASME/Industry sponsored workshop entitled "Tribological Limitations in Gas Turbine Engines" held on September 15-17, 1999 in Albany, New York. The impetus for the workshop came from the ASME's Research Committee on Tribology whose goal is to explore new tribological research topics which may become future research opportunities. Since this subject is of current interest to other industrial and government entities the conference received cosponsorship as noted above. The conference was well attended by government, industrial and academic participants. Topics discussed included current tribological issues in gas turbines as well as the potential impact (drawbacks and advantages) of future tribological technologies especially foil air bearings and magnetic beatings. It is hoped that this workshop report may serve as a starting point for continued discussions and activities in oil-free turbomachinery systems.

  4. Minnowbrook II 1997 Workshop on Boundary Layer Transition in Turbomachines

    Science.gov (United States)

    LaGraff John E. (Editor); Ashpis, David E. (Editor)

    1998-01-01

    The volume contains materials presented at the Minnowbrook II - 1997 Workshop on Boundary Layer Transition in Turbomachines, held at Syracuse University Minnowbrook Conference Center, New York, on September 7-10, 1997. The workshop followed the informal format at the 1993 Minnowbrook I workshop, focusing on improving the understanding of late stage (final breakdown) boundary layer transition, with the engineering application of improving design codes for turbomachinery in mind. Among the physical mechanisms discussed were hydrodynamic instabilities, laminar to turbulent transition, bypass transition, turbulent spots, wake interaction with boundary layers, calmed regions, and separation, all in the context of flow in turbomachinery, particularly in compressors and high and low pressure turbines. Results from experiments, DNS, computation, modeling and theoretical analysis were presented. Abstracts and copies of viewgraphs, a specifically commissioned summation paper prepared after the workshop, and a transcript of the extensive working group reports and discussions are included in this volume. They provide recommendations for future research and clearly highlight the need for continued vigorous research in the technologically important area of transition in turbomachines.

  5. Wind Turbine Micropitting Workshop: A Recap

    Energy Technology Data Exchange (ETDEWEB)

    Sheng, S.

    2010-02-01

    Micropitting is a Hertzian fatigue phenomenon that affects many wind turbine gearboxes, and it affects the reliability of the machines. With the major growth and increasing dependency on renewable energy, mechanical reliability is an extremely important issue. The U.S. Department of Energy has made a commitment to improving wind turbine reliability and the National Renewable Energy Laboratory (NREL) has started a gearbox reliability project. Micropitting as an issue that needed attention came to light through this effort. To understand the background of work that had already been accomplished, and to consolidate some level of collective understanding of the issue by acknowledged experts, NREL hosted a wind turbine micropitting workshop, which was held at the National Wind Technology Center in Boulder, Colorado, on April 15 and 16, 2009.

  6. 2009 Linear Collider Workshop of the Americas

    Energy Technology Data Exchange (ETDEWEB)

    Seidel, Sally [Univ. of New Mexico, Albuquerque, NM (United States). Dept. of Physics and Astronomy

    2009-09-29

    The 2009 Linear Collider Workshop of the Americas was held on the campus of the University of New Mexico from 29 September to 3 October, 2009. This was a joint meeting of the American Linear Collider Physics Group and the ILC Global Design Effort. Two hundred fifty people attended. The number of scientific contributions was 333. The complete agenda, with links to all of the presentations, is available at physics.unm.edu/LCWA09/. The meeting brought together international experts as well as junior scientists, to discuss the physics potential of the linear collider and advances in detector technology. The validation of detector designs was announced, and the detector design groups planned the next phase of the effort. Detector R&D teams reported on progress on many topics including calorimetry and tracking. Recent accelerator design considerations were discussed in a special session for experimentalists and theorists.

  7. Research Frontiers in Bioinspired Energy: Molecular-Level Learning from Natural Systems: A Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Zolandz, Dorothy

    2012-03-28

    An interactive, multidisciplinary, public workshop, organized by a group of experts in biochemistry, biophysics, chemical and biomolecular engineering, chemistry, microbial metabolism, and protein structure and function, was held on January 6-7, 2011 in Washington, DC. Fundamental insights into the biological energy capture, storage, and transformation processes provided by speakers was featured in this workshop which included topics such as microbes living in extreme environments such as hydrothermal vents or caustic soda lakes (extremophiles) provided a fascinating basis for discussing the exploration and development of new energy systems. Breakout sessions and extended discussions among the multidisciplinary groups of participants in the workshop fostered information sharing and possible collaborations on future bioinspired research. Printed and web-based materials that summarize the committee's assessment of what transpired at the workshop were prepared to advance further understanding of fundamental chemical properties of biological systems within and between the disciplines. In addition, webbased materials (including two animated videos) were developed to make the workshop content more accessible to a broad audience of students and researchers working across disciplinary boundaries. Key workshop discussion topics included: Exploring and identifying novel organisms; Identifying patterns and conserved biological structures in nature; Exploring and identifying fundamental properties and mechanisms of known biological systems; Supporting current, and creating new, opportunities for interdisciplinary education, training, and outreach; and Applying knowledge from biology to create new devices and sustainable technology.

  8. Craniofacial morphogenesis workshop report.

    Science.gov (United States)

    Solursh, M; Murray, J

    1994-05-01

    The following report highlights the discussions and interaction at the workshop on craniofacial morphogenesis, sponsored by The Human Frontier Science Program, held in April 1993 at the University of Iowa. A brief summary of selected sessions is included to exemplify the benefits of bringing together individuals from various disciplines and backgrounds in order to establish a unified theory of craniofacial morphogenesis. The synthesis of information and experience of a wide range of approaches made the 4-day period an invaluable experience for the participants from nine different countries.

  9. CENDI Indexing Workshop

    Science.gov (United States)

    1994-01-01

    The CENDI Indexing Workshop held at NASA Headquarters, Two Independence Square, 300 E Street, Washington, DC, on September 21-22, 1994 focused on the following topics: machine aided indexing, indexing quality, an indexing pilot project, the MedIndEx Prototype, Department of Energy/Office of Scientific and Technical Information indexing activities, high-tech coding structures, category indexing schemes, and the Government Information Locator Service. This publication consists mostly of viewgraphs related to the above noted topics. In an appendix is a description of the Government Information Locator Service.

  10. 15th Cluster workshop

    CERN Document Server

    Laakso, Harri; Escoubet, C. Philippe; The Cluster Active Archive : Studying the Earth’s Space Plasma Environment

    2010-01-01

    Since the year 2000 the ESA Cluster mission has been investigating the small-scale structures and processes of the Earth's plasma environment, such as those involved in the interaction between the solar wind and the magnetospheric plasma, in global magnetotail dynamics, in cross-tail currents, and in the formation and dynamics of the neutral line and of plasmoids. This book contains presentations made at the 15th Cluster workshop held in March 2008. It also presents several articles about the Cluster Active Archive and its datasets, a few overview papers on the Cluster mission, and articles reporting on scientific findings on the solar wind, the magnetosheath, the magnetopause and the magnetotail.

  11. Preface SMI '13 : Proceedings of the 2013 ACM Workshop on Smart Material Interfaces: Another Step to a Material Future

    NARCIS (Netherlands)

    Minuto, Andrea; Kretzer, Manuel; Nijholt, Anton; Minuto, Andrea; Kretzer, Manuel; Nijholt, Anton

    2013-01-01

    These are the proceedings of the second international workshop on Smart Material Interfaces`(SMI 2013), held in Sydney, Australia on December 13th. This second workshop is held in conjunction with the 15th ACM International Conference on Multimodal Interaction (ICMI 2013). The first workshop on Smar

  12. Applications of neural networks in environmental and energy sciences and engineering. Proceedings of the 1995 workshop on environmental and energy applications of neural networks

    Energy Technology Data Exchange (ETDEWEB)

    Hashem, S.; Keller, P.E.; Kouzes, R.T.; Kangas, L.J.

    1995-12-31

    These proceedings contain edited versions of the technical presentations of the Workshop on Environmental and Energy Applications of Neural Networks, held on March 30--31, 1995, in Richland, Washington. The purpose of the workshop was to provide a forum for discussing environmental, energy, and biomedical applications of neural networks. Panels were held to discuss various research and development issues relating to real-world applications in each of the three areas. The applications covered in the workshop were: Environmental applications -- modeling and predicting soil, air and water pollution, environmental sensing, spectroscopy, hazardous waste handling and cleanup; Energy applications -- process monitoring and optimization of power systems, modeling and control of power plants, environmental monitoring for power systems, power load forecasting, fault location and diagnosis of power systems; and Biomedical applications -- medical image and signal analysis, medical diagnosis, analysis of environmental health effects, and modeling biological systems. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

  13. Technology Description Sheets form the AMC 1990 Technology Expo Held in Aberdeen Proving Ground, Maryland on 1-4 October 1990

    Science.gov (United States)

    1990-10-04

    with no immediate commercial market to inspire cost reduction. The Attn: SLCMArEMC, Mr. Philp -Wang Materials Technology Laboratory (MTL) has worked...fiber optic cable and imaging sensors, For additional information,- contact: Commander, U.S. Army Missile Command • Attn: AMSMI-RD.GC-T, Paul Jacobs...6 and 10 calibers. For additional information, contact: Director, U.S. Army Ballistic Research Laboratory Attn, SLCBR-LF, Charles J Nietubicz Paul

  14. VI International Workshop on Nature Inspired Cooperative Strategies for Optimization

    CERN Document Server

    Otero, Fernando; Masegosa, Antonio

    2014-01-01

    Biological and other natural processes have always been a source of inspiration for computer science and information technology. Many emerging problem solving techniques integrate advanced evolution and cooperation strategies, encompassing a range of spatio-temporal scales for visionary conceptualization of evolutionary computation. This book is a collection of research works presented in the VI International Workshop on Nature Inspired Cooperative Strategies for Optimization (NICSO) held in Canterbury, UK. Previous editions of NICSO were held in Granada, Spain (2006 & 2010), Acireale, Italy (2007), Tenerife, Spain (2008), and Cluj-Napoca, Romania (2011). NICSO 2013 and this book provides a place where state-of-the-art research, latest ideas and emerging areas of nature inspired cooperative strategies for problem solving are vigorously discussed and exchanged among the scientific community. The breadth and variety of articles in this book report on nature inspired methods and applications such as Swarm In...

  15. Workshop for Conducting Phase 2 of the INTEC Glass Composition Variation Study

    Energy Technology Data Exchange (ETDEWEB)

    B. A. Staples; C. A. Musick

    1999-06-01

    During March 30-31, 1999, the Phase 2 Idaho Nuclear Technology and Engineering Center (INTEC) Glass Composition Variation Study Workshop was held at the Shilo Inn in Idaho Falls, Idaho. The workshop had the purpose of establishing a preparation and characterization protocol for the phase 2b glasses of the INTEC composition variation study. The workshop also had the purpose of reviewing the most recent estimates of INTEC high-level waste compositions for their impacts on the vitrification of these wastes. Waste composition estimates discussed included those of the various calcine types and of the high activity waste fractions from the calcine dissolution/separations process. Persons from the Idaho National Engineering and Environmental Laboratory, Pacific Northwest Laboratories, and Savannah River Technology Center participated in this workshop. As a result of the workshop, details for the preparation and characterization of the phase 2b matrix of glasses were completed. The impac ts on vitrification of updated waste composition estimates were discussed. Actions for the preparation and characterization of the glasses and development of the separations flowsheet were established.

  16. 第1届中德焊接模拟国际研讨会在柏林举行%1st Sino-German Workshop on Simulation of Welding held at BAM in Berlin

    Institute of Scientific and Technical Information of China (English)

    中国焊接学会计算机辅助焊接工程专业委员会

    2010-01-01

    @@ 第1届中德焊接模拟国际研讨会(1st Sino-German Workshop on simulation of Welding)于2010年10月25~29日在德国柏林成功举行.此次研讨会由中国焊接学会计算机辅助焊接工程专业委员会与德国联邦材料试验研究院(BAM)连接构件安全性分部(Division V.5)联合举办:由德国BAM的Rethmeier教授和山东大学的武传松教授担任共同主席.

  17. NKS Workshop on Radioanalytical Chemistry - Final report

    DEFF Research Database (Denmark)

    The NKS-B workshop on radioanalytical chemistry was held 2-6th Sept 2013 at Risø, Denmark. There were a total of 49 persons participating in the workshop, including 32 young participants and 15 lecturers. The work-shop started with 3 days of lab practice followed by 1.5 day’s lectures by the expe......The NKS-B workshop on radioanalytical chemistry was held 2-6th Sept 2013 at Risø, Denmark. There were a total of 49 persons participating in the workshop, including 32 young participants and 15 lecturers. The work-shop started with 3 days of lab practice followed by 1.5 day’s lectures...... by the experienced experts from different research fields, and then a half day’s presentation by the young participants. A questionnaire investigation completed after the workshop highlighted the necessity and importance of organization of such workshop in each 3-4 years for community of both Nordic and other...

  18. Proceedings of the Irvine Workshop on Alternatives for the Environment, Certification, and Control of the DOD Common High Order Language, Held at California University, Irvine on 20-22 June 1978.

    Science.gov (United States)

    1978-01-01

    No reply.] S. Di Nitto : One criticism that is made of these higher order languages is that people cannot get as close to the machine as they could...instance of assembly language code. S. Di Nitto : Over a long period of time -- nobody wants to be the first to do that. Why should your project be held up...while the compiler is being verified? S. Crocker: You’re doing the opposite; you’re repeating first experiences time after time. S. Di Nitto : An

  19. PROCEEDINGS OF THE 2001 NATIONAL OILHEAT RESEARCH ALLIANCE TECHNOLOGY CONFERENCE HELD AT BROOKHAVEN NATIONAL LABORATORY, UPTON, N.Y., APRIL 30 - MAY 1, 2001.

    Energy Technology Data Exchange (ETDEWEB)

    MCDONALD, R.J.

    2001-04-30

    BNL is proud to acknowledge all of our 2001 sponsors, with their help and support this has correctly become an oilheat industry conference. It is quite gratifying to see an industry come together to help support an activity like the technology conference, for the benefit of the industry as a whole and to celebrate the beginning of the National Oilheat Research Alliance. This meeting is the fourteenth oil heat industry technology conference to be held since 1984 and the first under a new name, NORA, the National Oilheat research Alliance, and the very first in the new century. The conference is a very important part of the effort in technology transfer, which is supported by the Oilheat Research Program. The Oilheat Research Program at BNL is under the newly assigned program management at the Office of Power Technology within the US DOE. The foremost reason for the conference is to provide a platform for the exchange of information and perspectives among international researchers, engineers, manufacturers, service technicians, and marketers of oil-fired space-conditioning equipment. The conference provides a conduit by which information and ideas can be exchanged to examine present technologies, as well as helping to develop the future course for oil heating advancement. These conferences also serve as a stage for unifying government representatives, researchers, fuel oil marketers, and other members of the oil-heat industry in addressing technology advancements in this important energy use sector. The specific objectives of the conference are to: (1) Identify and evaluate the current state-of-the-art and recommend new initiatives for higher efficiency, a cleaner environment, and to satisfy consumer needs cost-effectively, reliably, and safely; (2) Foster cooperative interactions among federal and industrial representatives for the common goal of sustained economic growth and energy security via energy conservation. Seventeen technical presentations will be made

  20. t4 Workshop Report*

    Science.gov (United States)

    Kleensang, Andre; Maertens, Alexandra; Rosenberg, Michael; Fitzpatrick, Suzanne; Lamb, Justin; Auerbach, Scott; Brennan, Richard; Crofton, Kevin M.; Gordon, Ben; Fornace, Albert J.; Gaido, Kevin; Gerhold, David; Haw, Robin; Henney, Adriano; Ma’ayan, Avi; McBride, Mary; Monti, Stefano; Ochs, Michael F.; Pandey, Akhilesh; Sharan, Roded; Stierum, Rob; Tugendreich, Stuart; Willett, Catherine; Wittwehr, Clemens; Xia, Jianguo; Patton, Geoffrey W.; Arvidson, Kirk; Bouhifd, Mounir; Hogberg, Helena T.; Luechtefeld, Thomas; Smirnova, Lena; Zhao, Liang; Adeleye, Yeyejide; Kanehisa, Minoru; Carmichael, Paul; Andersen, Melvin E.; Hartung, Thomas

    2014-01-01

    Summary Despite wide-spread consensus on the need to transform toxicology and risk assessment in order to keep pace with technological and computational changes that have revolutionized the life sciences, there remains much work to be done to achieve the vision of toxicology based on a mechanistic foundation. A workshop was organized to explore one key aspect of this transformation – the development of Pathways of Toxicity (PoT) as a key tool for hazard identification based on systems biology. Several issues were discussed in depth in the workshop: The first was the challenge of formally defining the concept of a PoT as distinct from, but complementary to, other toxicological pathway concepts such as mode of action (MoA). The workshop came up with a preliminary definition of PoT as “A molecular definition of cellular processes shown to mediate adverse outcomes of toxicants”. It is further recognized that normal physiological pathways exist that maintain homeostasis and these, sufficiently perturbed, can become PoT. Second, the workshop sought to define the adequate public and commercial resources for PoT information, including data, visualization, analyses, tools, and use-cases, as well as the kinds of efforts that will be necessary to enable the creation of such a resource. Third, the workshop explored ways in which systems biology approaches could inform pathway annotation, and which resources are needed and available that can provide relevant PoT information to the diverse user communities. PMID:24127042