WorldWideScience

Sample records for technologies visitt version

  1. Versions Of Care Technology

    Directory of Open Access Journals (Sweden)

    Sampsa Hyysalo

    2007-01-01

    Full Text Available The importance of users for innovation has been increasingly emphasized in the literatures on design and management of technology. However, less attention has been given to how people shape technology-in-use. This paper first provides a review of literature on technology use in the social and cultural studies of technology. It then moves to examine empirically how a novel alarm and monitoring appliance was appropriated in the work of home-care nurses and in the everyday living of elderly people. Analysis shows that even these technically unsavvy users shaped the technology considerably by various, even if mundane, acts of adapting it materially, as well as by attributing different meanings to it. However, the paper goes on to argue that such commonplace phrasing of the findings obscures their significance and interrelations. Consequently, the final section of the paper reframes the key findings of this study using the concepts of practice, enactment, and versions of technology to reach a more adequate description.

  2. Technology Transfer brochure (Swedish version)

    CERN Multimedia

    Lefevre, C

    2008-01-01

    A brief overview of how CERN's pioneering technologies for scientific research have branched out into various fields. Medicine, industrial processes, information and communication technology, as well as environment and energy fields make use of these innovative developments.

  3. Technology Transfer brochure (English version)

    CERN Multimedia

    Lefevre, C

    2007-01-01

    A brief overview of how CERN's pioneering technologies for scientific research have branched out into various fields. Medicine, industrial processes, information and communication technology, as well as environment and energy fields make use of these innovative developments.

  4. Technology Transfer brochure (Polish version)

    CERN Multimedia

    Lefevre, C

    2008-01-01

    A brief overview of how CERN's pioneering technologies for scientific research have branched out into various fields. Medicine, industrial processes, information and communication technology, as well as environment and energy fields make use of these innovative developments.

  5. Technology Transfer at CERN (english version)

    CERN Multimedia

    Marcastel, F

    2006-01-01

    A brief overview of how CERN's pioneering technologies for scientific research have branched out into various fields. Medicine, industrial processes, information and communication technology, as well as environment and energy fields make use of these innovative developments.

  6. Technology Transfer at CERN (french version)

    CERN Multimedia

    Marcastel, F

    2007-01-01

    Abrief overview of how CERN's pioneering technologies for scientific research have branched out into various fields. Medicine, industrial processes, information and communication technology, as well as environment and energy fields make use of these innovative developments.

  7. Nordic energy technology scoreboard. Full version

    Energy Technology Data Exchange (ETDEWEB)

    Kiltkou, Antje; Iversen, Eric; Scortato, Lisa

    2010-07-01

    The Nordic Energy Technology Scoreboard provides a tool for understanding the state of low-carbon energy technology development in the Nordic region. It assesses the five Nordic countries of Denmark, Finland, Iceland, Norway and Sweden, alongside reference countries and regions including: The United Kingdom, Germany, Spain, Portugal, France, Italy, the Netherlands, Austria, USA, Japan and the EU 27. It focuses on five low-carbon energy technologies: Wind, photovoltaic (PV) solar, bio-fuels, geothermal, and carbon capture and storage (CCS). This scoreboard was developed as a pilot project with a limited scope of technologies, countries and indicators. In addition to providing a tool for decision-makers, it aimed to act as a catalyst for the future development of scoreboards and a vehicle to promote better data collection. Low-carbon energy technologies are not easy to measure. This is due to a variety of factors that much be kept in account when developing scoreboards for this purpose. Many low-carbon technologies are still at immature stages of development. Sound comparable data requires common definitions and standards to be adopted before collection can even take place. This process often lags behind the development of low-carbon technologies, and there are therefore considerable data availability and categorisation issues. The diversity of technologies and their different stages of development hamper comparability. The IEA classifies low-carbon technologies into three categories. The most mature includes hydropower, onshore wind, biomass CHP, and geothermal energy, the second most mature includes PV solar and offshore wind power, while the least mature includes concentrating solar power, CCS and ocean energy. This is problematic as less mature technologies are underrepresented in later stages of the innovation system. Many low-carbon technologies are systemic, meaning progress in developing one technology may hinge on developments in a connected technology

  8. Nordic energy technology scoreboard. Full version

    Energy Technology Data Exchange (ETDEWEB)

    Kiltkou, Antje; Iversen, Eric; Scortato, Lisa

    2010-07-01

    The Nordic Energy Technology Scoreboard provides a tool for understanding the state of low-carbon energy technology development in the Nordic region. It assesses the five Nordic countries of Denmark, Finland, Iceland, Norway and Sweden, alongside reference countries and regions including: The United Kingdom, Germany, Spain, Portugal, France, Italy, the Netherlands, Austria, USA, Japan and the EU 27. It focuses on five low-carbon energy technologies: Wind, photovoltaic (PV) solar, bio-fuels, geothermal, and carbon capture and storage (CCS). This scoreboard was developed as a pilot project with a limited scope of technologies, countries and indicators. In addition to providing a tool for decision-makers, it aimed to act as a catalyst for the future development of scoreboards and a vehicle to promote better data collection. Low-carbon energy technologies are not easy to measure. This is due to a variety of factors that much be kept in account when developing scoreboards for this purpose. Many low-carbon technologies are still at immature stages of development. Sound comparable data requires common definitions and standards to be adopted before collection can even take place. This process often lags behind the development of low-carbon technologies, and there are therefore considerable data availability and categorisation issues. The diversity of technologies and their different stages of development hamper comparability. The IEA classifies low-carbon technologies into three categories. The most mature includes hydropower, onshore wind, biomass CHP, and geothermal energy, the second most mature includes PV solar and offshore wind power, while the least mature includes concentrating solar power, CCS and ocean energy. This is problematic as less mature technologies are underrepresented in later stages of the innovation system. Many low-carbon technologies are systemic, meaning progress in developing one technology may hinge on developments in a connected technology

  9. The technology - activities of daily living questionnaire: a version with a technology-related subscale.

    Science.gov (United States)

    Muñoz-Neira, Carlos; López, Oscar L; Riveros, Rodrigo; Núñez-Huasaf, Javier; Flores, Patricia; Slachevsky, Andrea

    2012-01-01

    Information and communication technology (ICT) has become an increasingly important part of daily life. The ability to use technology is becoming essential for autonomous functioning in society. Current functional scales for patients with cognitive impairment do not evaluate the use of technology. The objective of this study was to develop and validate a new version of the Activities of Daily Living Questionnaire (ADLQ) that incorporates an ICT subscale. A new technology-based subscale was incorporated into the Spanish version of the ADLQ (SV-ADLQ), entitled the Technology version of the ADLQ (T-ADLQ). The T-ADLQ was administered to 63 caregivers of dementia patients, 21 proxies of mild cognitive impairment patients and 44 proxies of normal elderly subjects (mean age of the sample ± SD: 73.5 ± 8.30 years). We analysed the convergent validity, internal consistency, reliability cut-off point, sensitivity and specificity of the T-ADLQ. The results of the T-ADLQ were compared to the SV-ADLQ. The T-ADLQ showed significant correlations with the Mini-Mental State Examination (MMSE), the Frontal Assessment Battery (FAB) as well as other measures of functional impairment and dementia severity (MMSE: r = -0.70; FAB: r = -0.65; Functional Assessment Questionnaire: r = 0.77; Instrumental Activities of Daily Living Scale: r = -0.75; Clinical Dementia Rating Scale: r = 0.72; p technology items in the T-ADLQ did not improve the performance of the scale, which may reflect the lack of widespread use of technology by elderly individuals. Thus, although it appeared reasonable to add technology use questions to the ADLQ, our experience suggested that this has to be done cautiously, since the sensitivity of these additional items could vary in different populations. The T-ADLQ needs to be validated in a different population of dementia subjects. Copyright © 2012 S. Karger AG, Basel.

  10. The 'Technology - Activities of Daily Living Questionnaire': a version with a technology-related subscale

    Science.gov (United States)

    Muñoz-Neira, Carlos; López, Oscar L.; Riveros, Rodrigo; Nuñez-Huasaf, Javier; Flores, Patricia; Slachevsky, Andrea

    2016-01-01

    Background Information and communication technology (ICT) has become an increasingly important part of daily life. The ability to use technology is becoming essential for autonomous functioning in society. Current functional scales for patients with cognitive impairment do not evaluate the use of technology. The objective of this study was to develop and validate a new version of the Activities of Daily Living Questionnaire (ADLQ) that incorporates an ICT subscale. Method A new technology-based subscale was incorporated into the Spanish Version of the ADLQ (SV-ADLQ), entitled The Technology Version of the ADLQ (T-ADLQ). The T-ADLQ was administered to 63 caregivers of dementia patients, 21 proxies of mild cognitive impairment patients and 44 proxies of normal elderly subjects (mean age of the sample ± SD: 73.5 ± 8.30). We analysed the convergent validity, internal consistency, reliability cut-off point, sensitivity and specificity of the T-ADLQ. The results of the T-ADLQ were compared to the SV-ADLQ. Results The T-ADLQ showed significant correlations with the Mini-mental Test (MMSE), the Frontal Assesment Battery (FAB) as well as other measures of functional impairment and dementia severity (MMSE: r = −0.70; FAB: r = −0.65; Functional Assessment Questionnaire: r = 0.77; Instrumental Activities of Daily Living Scale: r = −0.75; Clinical Dementia Rating Scale: r = 0.72; p<0.001). The T-ADLQ showed a good reliability with a relatively high Cronbach’s alpha coefficient (Cronbach’s alpha = 0.861). When considering a functional impairment cut-off point greater than 29.25%, the sensitivity and specificity of the T-ADLQ were 82% and 90%, respectively. The area under the ROC curve (AUC) was 0.937 for the T-ADLQ and 0.932 for the original version of the test. Conclusions The T-ADLQ revealed adequate indicators of validity and reliability for the functional assessment of activities of daily living in dementia patients. However, the inclusion of technology items in

  11. Guiding Questions for Technology Planning. Version 1.0.

    Science.gov (United States)

    Knuth, Randy, Ed.; Hopey, Chris, Ed.

    This publication, intended for administrators and technology planning teams in a wide range of educational settings, presents a set of guiding questions for technology planning that is both supported by current research and found in exemplary technology plans. The guide will help technology planning teams to start and guide a technology planning…

  12. Energy Technology Perspectives 2012: Executive Summary [Arabic version

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-11-01

    Energy Technology Perspectives (ETP) is the International Energy Agency’s most ambitious publication on new developments in energy technology. It demonstrates how technologies – from electric vehicles to smart grids – can make a decisive difference in achieving the objective of limiting the global temperature rise to 2°C and enhancing energy security. ETP 2012 presents scenarios and strategies to 2050, with the aim of guiding decision makers on energy trends and what needs to be done to build a clean, secure and competitive energy future.

  13. Energy Technology Perspectives 2012: Executive Summary [Italian version

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-11-01

    Energy Technology Perspectives (ETP) is the International Energy Agency’s most ambitious publication on new developments in energy technology. It demonstrates how technologies – from electric vehicles to smart grids – can make a decisive difference in achieving the objective of limiting the global temperature rise to 2°C and enhancing energy security. ETP 2012 presents scenarios and strategies to 2050, with the aim of guiding decision makers on energy trends and what needs to be done to build a clean, secure and competitive energy future.

  14. Energy Technology Perspectives 2012: Executive Summary [Portuguese version

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-11-01

    Energy Technology Perspectives (ETP) is the International Energy Agency’s most ambitious publication on new developments in energy technology. It demonstrates how technologies – from electric vehicles to smart grids – can make a decisive difference in achieving the objective of limiting the global temperature rise to 2°C and enhancing energy security. ETP 2012 presents scenarios and strategies to 2050, with the aim of guiding decision makers on energy trends and what needs to be done to build a clean, secure and competitive energy future.

  15. Energy Technology Perspectives 2012: Executive Summary [Spanish version

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-11-01

    Energy Technology Perspectives (ETP) is the International Energy Agency’s most ambitious publication on new developments in energy technology. It demonstrates how technologies – from electric vehicles to smart grids – can make a decisive difference in achieving the objective of limiting the global temperature rise to 2°C and enhancing energy security. ETP 2012 presents scenarios and strategies to 2050, with the aim of guiding decision makers on energy trends and what needs to be done to build a clean, secure and competitive energy future.

  16. Energy Technology Perspectives 2012: Executive Summary [French version

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-11-01

    Energy Technology Perspectives (ETP) is the International Energy Agency’s most ambitious publication on new developments in energy technology. It demonstrates how technologies – from electric vehicles to smart grids – can make a decisive difference in achieving the objective of limiting the global temperature rise to 2°C and enhancing energy security. ETP 2012 presents scenarios and strategies to 2050, with the aim of guiding decision makers on energy trends and what needs to be done to build a clean, secure and competitive energy future.

  17. Energy technology perspectives: scenarios and strategies to 2050 [Russian version

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    At their 2005 summit in Gleneagles, G8 leaders confronted questions of energy security and supply and lowering of CO{sub 2} emissions and decided to act with resolve and urgency. They called upon the International Energy Agency to provide advice on scenarios and strategies for a clean and secure energy future. Energy Technology Perspectives is a response to the G8 request. This work demonstrates how energy technologies can make a difference in a series of global scenarios to 2050. It reviews in detail the status and prospects of key energy technologies in electricity generation, buildings, industry and transport. It assesses ways the world can enhance energy security and contain growth in CO{sub 2} emissions by using a portfolio of current and emerging technologies. Major strategic elements of a successful portfolio are energy efficiency, CO{sub 2} capture and storage, renewables and nuclear power. 110 figs., 4 annexes.

  18. Children's Satisfaction with Assistive Technology Solutions for Schoolwork Using the Quest 2.1: Children's Version

    Science.gov (United States)

    Murchland, Sonya; Kernot, Jocelyn; Parkyn, Helen

    2011-01-01

    This study explored the levels of satisfaction children 8-18 years experienced with assistive technology items used to assist them in their schoolwork. Modified from the Quebec User Evaluation of Satisfaction (QUEST 2.0), the QUEST 2.1: Children's Version was developed to enable scoring by children with or without parent assistance. The QUEST 2.1:…

  19. Greening the Grid - Advancing Solar, Wind, and Smart Grid Technologies (Spanish Version)

    Energy Technology Data Exchange (ETDEWEB)

    2016-04-01

    This is the Spanish version of 'Greening the Grid - Advancing Solar, Wind, and Smart Grid Technologies'. Greening the Grid provides technical assistance to energy system planners, regulators, and grid operators to overcome challenges associated with integrating variable renewable energy into the grid.

  20. Translation and pilot validation of the Danish version of the Everyday Technology Use Questionnaire (ETUQ)

    DEFF Research Database (Denmark)

    Helle, Tina; Kaptain, Rina Juel; Kottorp, Anders

    2016-01-01

    evidence in relation to response processes, internal scale validity and precision in measures. Results: After collapsing some scale step categories used in the ETUQ, a reduced number of items (n=40) demonstrated acceptable goodness-of-fit to the Rasch model. This reduced number of items demonstrated......Background: The use of everyday technologies has grown rapidly during the last decades and become an increasing part of people’s everyday life, and also now include the use of e-health technologies that are used on a daily basis for persons living with chronic health conditions, e.g., chronic...... obstructive pulmonary disease (COPD). There are however no validated assessments targeting the competence to use everyday- and e-health technology for these people. The aim of this pilot study was to investigate the validity of the Danish version of the Everyday Technology Use Questionnaire (ETUQ) in a sample...

  1. Environmental Technology Verification: Test Report of Mobile Source Selective Catalytic Reduction--Nett Technologies, Inc., BlueMAX 100 version A urea-based selective catalytic reduction technology

    Science.gov (United States)

    Nett Technologies’ BlueMAX 100 version A Urea-Based SCR System utilizes a zeolite catalyst coating on a cordierite honeycomb substrate for heavy-duty diesel nonroad engines for use with commercial ultra-low–sulfur diesel fuel. This environmental technology verification (ETV) repo...

  2. Using New Technologies: A Technology Transfer Guidebook. Version 02.00. 08

    Science.gov (United States)

    1993-12-01

    In a June 1992 IEEE Spectrum article, Capers Jones (1992) recounted aCASEWorld conference presentation by Chuck House, a former executive of Hewlett...Addison-Wesley. Implementation Management Accelerating Change Workshop. Brighton, Colorado: IMA, Inc. Associates 1992 Jones, Capers CASE’s Missing...Technology, Stan Przybylinski and Priscilla J. Fowler, eds., Santa Barbara , California (November 15-16, 1987):63-66. CASE Consulting Group. CASE Outlook

  3. Air Traffic Management Technology Demonstration-1 Concept of Operations (ATD-1 ConOps), Version 3.0

    Science.gov (United States)

    Baxley, Brian T.; Johnson, William C.; Scardina, John; Shay, Richard F.

    2016-01-01

    This document describes the goals, benefits, technologies, and procedures of the Concept of Operations (ConOps) for the Air Traffic Management (ATM) Technology Demonstration #1 (ATD-1), and provides an update to the previous versions of the document [ref 1 and ref 2].

  4. Psychological adaptation in the info-communication society: The revised version of Technology-Related Psychological Consequences Questionnaire.

    Directory of Open Access Journals (Sweden)

    Emelin V.A.

    2014-07-01

    Full Text Available The aim of the study is to consider technology-related changes in psychological needs and boundaries that affect one’s personal adaptation to the info-communication society, as well as how they relate to problematic or excessive technology use. Based on the psychological model of the consequences of technology use, we’ve picked two forms of technology use (one related to mobile phones and the other related to the Internet from a revised version of our Technology-Related Psychological Consequences Questionnaire. The new version includes nine questions: two assessing the excessive use of technology (the inability to resist using technology and subjective dependence, four assessing changes in psychological boundaries (boundaries extension and violation, easiness-related and opportunity-related preference for technology and the other three measuring technology-related needs (functionality, convenience and image making. In the normative sample (N=132, appropriate reliability, factor validity and convergent validity were demonstrated in comparisons to the picture measure of the technology-related boundaries change. Based on hierarchical regression and moderator analysis, it was shown that changes in psychological boundaries affect the excessive use of technology (explaining an additional 17-27% of the variance after adjusting for frequency of use and age group. The extension of boundaries and ease-of-use-related preference for mobile phones versus the Internet predicted satisfaction with life after adjusting for frequency of use, age group, inability to resist and subjective dependency respectively; however, the figures were not statistically significant. Thus, our data supports the hypothesis that there are different kinds of technology-related changes in psychological boundaries that manifest themselves in the subjective feeling of dependence on technology and the feeling that it is impossible to do without technology, which might in some cases

  5. Description of recommended non-thermal mixed waste treatment technologies: Version 1.0

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-01

    This document contains description of the technologies selected for inclusions in the Integrated Nonthermal Treatment Systems (INTS) Study. The purpose of these descriptions is to provide a more complete description of the INTS technologies. It supplements the summary descriptions of candidate nonthermal technologies that were considered for the INTS.

  6. Mass technologies and ignorance in the society of knowledge (Italian original version

    Directory of Open Access Journals (Sweden)

    Luciano Gallino

    2007-12-01

    Full Text Available An advanced expression of culture and of social evolution, contemporary technology, which increasingly incorporates endless quantities of scientific knowledge, has acquired a decisive power on human existence and on the natural system supporting it. It has the ability, now demonstrated, to attain a vast improvement in the quality of life ­ if one can benefit from proper amounts of it ­ and to prolong life for decades. On the other hand, its results may also go in a totally opposite direction, either against ourselves or our descendants, or other populations. A similar theory is true for life-supporting systems.

  7. BEST3D user's manual: Boundary Element Solution Technology, 3-Dimensional Version 3.0

    Science.gov (United States)

    1991-01-01

    The theoretical basis and programming strategy utilized in the construction of the computer program BEST3D (boundary element solution technology - three dimensional) and detailed input instructions are provided for the use of the program. An extensive set of test cases and sample problems is included in the manual and is also available for distribution with the program. The BEST3D program was developed under the 3-D Inelastic Analysis Methods for Hot Section Components contract (NAS3-23697). The overall objective of this program was the development of new computer programs allowing more accurate and efficient three-dimensional thermal and stress analysis of hot section components, i.e., combustor liners, turbine blades, and turbine vanes. The BEST3D program allows both linear and nonlinear analysis of static and quasi-static elastic problems and transient dynamic analysis for elastic problems. Calculation of elastic natural frequencies and mode shapes is also provided.

  8. A new version of variational integrated technology for environmental modeling with assimilation of available data

    Science.gov (United States)

    Penenko, Vladimir; Tsvetova, Elena; Penenko, Aleksey

    2014-05-01

    A modeling technology based on coupled models of atmospheric dynamics and chemistry are presented [1-3]. It is the result of application of variational methods in combination with the methods of decomposition and splitting. The idea of Euler's integrating factors combined with technique of adjoint problems is also used. In online technologies, a significant part of algorithmic and computational work consist in solving the problems like convection-diffusion-reaction and in organizing data assimilation techniques based on them. For equations of convection-diffusion, the methodology gives us the unconditionally stable and monotone discrete-analytical schemes in the frames of methods of decomposition and splitting. These schemes are exact for locally one-dimensional problems respect to the spatial variables. For stiff systems of equations describing transformation of gas and aerosol substances, the monotone and stable schemes are also obtained. They are implemented by non- iterative algorithms. By construction, all schemes for different components of state functions are structurally uniform. They are coordinated among themselves in the sense of forward and inverse modeling. Variational principles are constructed taking into account the fact that the behavior of the different dynamic and chemical components of the state function is characterized by high variability and uncertainty. Information on the parameters of models, sources and emission impacts is also not determined precisely. Therefore, to obtain the consistent solutions, we construct methods of the sensitivity theory taking into account the influence of uncertainty. For this purpose, new methods of data assimilation of hydrodynamic fields and gas-aerosol substances measured by different observing systems are proposed. Optimization criteria for data assimilation problems are defined so that they include a set of functionals evaluating the total measure of uncertainties. The latter are explicitly introduced into

  9. SEMINAIRE DE L'ENSEIGNEMENT TECHNIQUE Nouvelles Technologies en Tuyauteries Multicouches - French version only

    CERN Multimedia

    Davide Vitè

    2002-01-01

    Mardi 28 mai, mercredi 29 mai 28 mai, 9:30 - 12:00 - Training Centre Auditorium, Room 11, bldg. 593 28 mai, 14:00 - 17:00; 29 mai, 9:00 - 12:00 - Training Centre Rooms 13 and 15, bldg. 593 Nouvelles Technologies en Tuyauteries Multicouches Jacques Dougoud / GEBERIT SA, Lausanne, Suisse Mario Bettini / GEORG FISCHER PFCI S.r.l., Peschiera del Garda, Brescia, Italie Christian Tacco / VALSIR S.P.A., Vestone, Brescia, Italie Depuis quelques années l'apparition de tubes multicouches a changé radicalement la conception des tuyauteries, tant pour les applications industrielles que domestiques. Les utilisations au CERN concernent pratiquement tous les fluides, c'est-à-dire eau sanitaire, eau déminéralisée, air comprimé, fluorocarbones liquides ou gazeux, et tous les gaz, depuis l'hélium jusqu'au xénon. Ce séminaire de l'Enseignement Technique est adressé à toute personne concern&eac...

  10. LKJ's Version Information Monitoring System Based on GSM Technology%基于GSM技术的LKJ版本信息监控系统

    Institute of Scientific and Technical Information of China (English)

    黄学政; 耿百强

    2011-01-01

    Considerng that accidents of safety occurrd frequently recenly resulted from LKJ's data-version upgrade.LKJ's version information monitoring system was developed based on GSM technology. It satisfied full monitoring. management and controlling for dataversion upgrade, and it could also improve the working efficiency and quality. The principle, functions, design schemes and implementation of the system were introduced. The system has been applied to the LKJ's program of data version upgrade working in Guangzhou Railway Group Company successfully.%结合全路当前因LKJ数据换装频频出现的安全事故,基于GSM技术研制的LKJ版本信息监控系统,实现对数据换装过程的全面监管,使得数据换装过程"可监可控",提高了换装效率,保证了换装质量.对系统的开发原理、系统功能及系统设计方案和实施进行了介绍.该系统在广州铁路集团公司固定径路程序的换装中取得了较好的使用效果.

  11. A different interpretation of science-society relations: the socialization of scientific and technological research (Italian original version

    Directory of Open Access Journals (Sweden)

    Luciano d'Andrea

    2009-09-01

    Full Text Available Recent data delivered by Eurobarometer show how Europeans tend not to perceive science and technology as important factors for the Europe’s future. While showing the scarce development of scientific culture in Europe, these data allow to understand how science and technology are exposed to risk of social marginalization, notwithstanding the results they are attaining. In order to interpret this quite contradictory picture, an analytical framework revolving around the notion of “science and technology socialization” is proposed and developed. Implications of such an approach on research policies, on citizens’ participation and on the role of social sciences are also briefly examined.

  12. Alternative Fuel and Advanced Technology Commercial Lawn Equipment (Spanish version); Clean Cities, Energy Efficiency & Renewable Energy (EERE)

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, Erik

    2015-06-01

    Powering commercial lawn equipment with alternative fuels or advanced engine technology is an effective way to reduce U.S. dependence on petroleum, reduce harmful emissions, and lessen the environmental impacts of commercial lawn mowing. Numerous alternative fuel and fuel-efficient advanced technology mowers are available. Owners turn to these mowers because they may save on fuel and maintenance costs, extend mower life, reduce fuel spillage and fuel theft, and demonstrate their commitment to sustainability.

  13. Alternative treatment technology information center computer database system

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, D. [Environmental Protection Agency, Edison, NJ (United States)

    1995-10-01

    The Alternative Treatment Technology Information Center (ATTIC) computer database system was developed pursuant to the 1986 Superfund law amendments. It provides up-to-date information on innovative treatment technologies to clean up hazardous waste sites. ATTIC v2.0 provides access to several independent databases as well as a mechanism for retrieving full-text documents of key literature. It can be accessed with a personal computer and modem 24 hours a day, and there are no user fees. ATTIC provides {open_quotes}one-stop shopping{close_quotes} for information on alternative treatment options by accessing several databases: (1) treatment technology database; this contains abstracts from the literature on all types of treatment technologies, including biological, chemical, physical, and thermal methods. The best literature as viewed by experts is highlighted. (2) treatability study database; this provides performance information on technologies to remove contaminants from wastewaters and soils. It is derived from treatability studies. This database is available through ATTIC or separately as a disk that can be mailed to you. (3) underground storage tank database; this presents information on underground storage tank corrective actions, surface spills, emergency response, and remedial actions. (4) oil/chemical spill database; this provides abstracts on treatment and disposal of spilled oil and chemicals. In addition to these separate databases, ATTIC allows immediate access to other disk-based systems such as the Vendor Information System for Innovative Treatment Technologies (VISITT) and the Bioremediation in the Field Search System (BFSS). The user may download these programs to their own PC via a high-speed modem. Also via modem, users are able to download entire documents through the ATTIC system. Currently, about fifty publications are available, including Superfund Innovative Technology Evaluation (SITE) program documents.

  14. Convergence of Health Level Seven Version 2 Messages to Semantic Web Technologies for Software-Intensive Systems in Telemedicine Trauma Care.

    Science.gov (United States)

    Menezes, Pedro Monteiro; Cook, Timothy Wayne; Cavalini, Luciana Tricai

    2016-01-01

    To present the technical background and the development of a procedure that enriches the semantics of Health Level Seven version 2 (HL7v2) messages for software-intensive systems in telemedicine trauma care. This study followed a multilevel model-driven approach for the development of semantically interoperable health information systems. The Pre-Hospital Trauma Life Support (PHTLS) ABCDE protocol was adopted as the use case. A prototype application embedded the semantics into an HL7v2 message as an eXtensible Markup Language (XML) file, which was validated against an XML schema that defines constraints on a common reference model. This message was exchanged with a second prototype application, developed on the Mirth middleware, which was also used to parse and validate both the original and the hybrid messages. Both versions of the data instance (one pure XML, one embedded in the HL7v2 message) were equally validated and the RDF-based semantics recovered by the receiving side of the prototype from the shared XML schema. This study demonstrated the semantic enrichment of HL7v2 messages for intensive-software telemedicine systems for trauma care, by validating components of extracts generated in various computing environments. The adoption of the method proposed in this study ensures the compliance of the HL7v2 standard in Semantic Web technologies.

  15. Airspace Systems Program: Next Generation Air Transportation System Concepts and Technology Development FY2010 Project Plan Version 3.0

    Science.gov (United States)

    Kopardekar, Parimal H.

    2010-01-01

    This document describes the FY2010 plan for the management and execution of the Next Generation Air Transportation System (NextGen) Concepts and Technology Development (CTD) Project. The document was developed in response to guidance from the Airspace Systems Program (ASP), as approved by the Associate Administrator of the Aeronautics Research Mission Directorate (ARMD), and from guidelines in the Airspace Systems Program Plan. Congress established the multi-agency Joint Planning and Development Office (JPDO) in 2003 to develop a vision for the 2025 Next Generation Air Transportation System (NextGen) and to define the research required to enable it. NASA is one of seven agency partners contributing to the effort. Accordingly, NASA's ARMD realigned the Airspace Systems Program in 2007 to "directly address the fundamental research needs of the Next Generation Air Transportation System...in partnership with the member agencies of the JPDO." The Program subsequently established two new projects to meet this objective: the NextGen-Airspace Project and the NextGen-Airportal Project. Together, the projects will also focus NASA s technical expertise and world-class facilities to address the question of where, when, how and the extent to which automation can be applied to moving aircraft safely and efficiently through the NAS and technologies that address optimal allocation of ground and air technologies necessary for NextGen. Additionally, the roles and responsibilities of humans and automation influence in the NAS will be addressed by both projects. Foundational concept and technology research and development begun under the NextGen-Airspace and NextGen-Airportal projects will continue. There will be no change in NASA Research Announcement (NRA) strategy, nor will there be any change to NASA interfaces with the JPDO, Federal Aviation Administration (FAA), Research Transition Teams (RTTs), or other stakeholders

  16. Tethys: The Marine and Hydrokinetic Technology Environmental Impacts Knowledge Management System -- Requirements Specification -- Version 1.0

    Energy Technology Data Exchange (ETDEWEB)

    Butner, R. Scott; Snowden-Swan, Lesley J.; Ellis, Peter C.

    2010-11-09

    The marine and hydrokinetic (MHK) environmental impacts knowledge management system (KMS), dubbed Tethys after the mythical Greek goddess of the seas, is being developed for the U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy Wind and Hydropower Technologies Program (WHTP) by Pacific Northwest National Laboratory (PNNL). This requirements specification establishes the essential capabilities required of Tethys and clarifies for WHTP and the Tethys development team the results that must be achieved by the system.

  17. Air Traffic Management Technology Demonstration-1 Concept of Operations (ATD-1 ConOps), Version 2.0

    Science.gov (United States)

    Baxley, Brian T.; Johnson, William C.; Swenson, Harry N.; Robinson, John E.; Prevot, Tom; Callantine, Todd J.; Scardina, John; Greene, Michael

    2013-01-01

    This document is an update to the operations and procedures envisioned for NASA s Air Traffic Management (ATM) Technology Demonstration #1 (ATD-1). The ATD-1 Concept of Operations (ConOps) integrates three NASA technologies to achieve high throughput, fuel-efficient arrival operations into busy terminal airspace. They are Traffic Management Advisor with Terminal Metering (TMA-TM) for precise time-based schedules to the runway and points within the terminal area, Controller-Managed Spacing (CMS) decision support tools for terminal controllers to better manage aircraft delay using speed control, and Flight deck Interval Management (FIM) avionics and flight crew procedures to conduct airborne spacing operations. The ATD-1 concept provides de-conflicted and efficient operations of multiple arrival streams of aircraft, passing through multiple merge points, from top-of-descent (TOD) to the Final Approach Fix. These arrival streams are Optimized Profile Descents (OPDs) from en route altitude to the runway, using primarily speed control to maintain separation and schedule. The ATD-1 project is currently addressing the challenges of integrating the three technologies, and their implantation into an operational environment. The ATD-1 goals include increasing the throughput of high-density airports, reducing controller workload, increasing efficiency of arrival operations and the frequency of trajectory-based operations, and promoting aircraft ADS-B equipage.

  18. Rapid inducible protein displacement in Plasmodium in vivo and in vitro using knocksideways technology [version 1; referees: 3 approved

    Directory of Open Access Journals (Sweden)

    Katie R. Hughes

    2017-03-01

    Full Text Available A deeper understanding of the biology of the Plasmodium parasite is essential in order to identify targets for interventions, with the ultimate aim of eliminating malaria. Determining the function(s of essential proteins in Plasmodium has, until recently, been hampered by the lack of efficient conditional systems to abrogate proteins. We report the adaptation of a conditional technology, knocksideways (KS, for use in Plasmodium berghei, which can potentially rapidly inactivate proteins of interest through relocalisation. The system is induced using rapamycin, which allows for KS both in vitro and in vivo and is effective more rapidly than any other reported system. KS utilises pairs of fluorescent tags that facilitate live imaging and allows for rapid confirmation of efficient protein redistribution on live parasites, allowing for streamlined workflows. We demonstrate the characteristics of the system using transgenically expressed cytoplasmic GFP and provide proof of principle by inducibly redistributing a number of proteins with different native, subcellular locations.  We also demonstrate that KS can be applied to both mammalian and insect stages of Plasmodium. KS expands the range of (conditional technologies for genetic manipulation of malaria parasites and offers the potential to be further developed for medium throughput phenotype screens.

  19. Environmental Technology Verification Test Report of Mobile Source Selective Catalytic Reduction, Johnson Matthey SCCRT, Version 1, Selective Catalytic Reduction Technology with a Catalyzed Continuously Regenerating Trap

    Science.gov (United States)

    The Johnson Matthey SCCRT, v.1 technology is a urea-based SCR system combined with a CCRT filter designed for on-highway light, medium, and heavy heavy-duty diesel, urban and non-urban, bus exhaust gas recirculation (EGR)-or non-EGR-equipped engines for use with commercial ultra-...

  20. Health communication, information technology and the public’s attitude toward periodic general health examinations [version 1; referees: 2 approved

    Directory of Open Access Journals (Sweden)

    Quan-Hoang Vuong

    2016-12-01

    Full Text Available Background: Periodic general health examinations (GHEs are gradually becoming more popular as they employ subclinical screenings, as a means of early detection. This study considers the effect of information technology (IT, health communications and the public’s attitude towards GHEs in Vietnam. Methods: A total of 2,068 valid observations were obtained from a survey in Hanoi and its surrounding areas. Results: In total, 42.12% of participants stated that they were willing to use IT applications to recognise illness symptoms, and nearly 2/3 of them rated the healthcare quality at average level or below. Discussion: The data, which was processed by the BCL model, showed that IT applications (apps reduce hesitation toward GHEs; however, older people seem to have less confidence in using these apps. Health communications and government’s subsidy also increased the likelihood of people attending periodic GHEs. The probability of early check-ups where there is a cash subsidy could reach approximately 80%.

  1. Advanced communications technology satellite high burst rate link evaluation terminal power control and rain fade software test plan, version 1.0

    Science.gov (United States)

    Reinhart, Richard C.

    1993-01-01

    The Power Control and Rain Fade Software was developed at the NASA Lewis Research Center to support the Advanced Communications Technology Satellite High Burst Rate Link Evaluation Terminal (ACTS HBR-LET). The HBR-LET is an experimenters terminal to communicate with the ACTS for various experiments by government, university, and industry agencies. The Power Control and Rain Fade Software is one segment of the Control and Performance Monitor (C&PM) Software system of the HBR-LET. The Power Control and Rain Fade Software automatically controls the LET uplink power to compensate for signal fades. Besides power augmentation, the C&PM Software system is also responsible for instrument control during HBR-LET experiments, control of the Intermediate Frequency Switch Matrix on board the ACTS to yield a desired path through the spacecraft payload, and data display. The Power Control and Rain Fade Software User's Guide, Version 1.0 outlines the commands and procedures to install and operate the Power Control and Rain Fade Software. The Power Control and Rain Fade Software Maintenance Manual, Version 1.0 is a programmer's guide to the Power Control and Rain Fade Software. This manual details the current implementation of the software from a technical perspective. Included is an overview of the Power Control and Rain Fade Software, computer algorithms, format representations, and computer hardware configuration. The Power Control and Rain Fade Test Plan provides a step-by-step procedure to verify the operation of the software using a predetermined signal fade event. The Test Plan also provides a means to demonstrate the capability of the software.

  2. The Whole Marketing Strategy of the Introduction Version of Science and Technology Books%引进版科技图书的全营销策略

    Institute of Scientific and Technical Information of China (English)

    周强; 曹巍

    2016-01-01

    The whole marketing strategy of the introduction version of science and technology books breaks through the traditional operation mode of marketing“sel for sel ”through deeply getting involved in the early stage of planning topics, the middle stage of design optimization and pre-sale and the multi-dimensional expansion of the sales channels at the late stage, thus to achieve an effective control of cost and risks and ultimately win the broader market.%引进版科技图书的全营销策略突破了传统营销“为售而售”的运作模式,通过选题策划初期的深度介入,中期的设计优化和预售,后期销售渠道的多维度拓展,实现了成本及风险的有效控制,最终赢得更为广阔的销售市场。

  3. 版本控制系统--Subversion技术及其在软件开发库的应用%A Version Control System:Technology of Subversion and Use in Software Development Repository

    Institute of Scientific and Technical Information of China (English)

    高平; 周磊

    2013-01-01

    Subversion is a free/open-source version control system with which users can achieve version management conveniently. This paper first describes the features and architecture of Subversion, then it compares the two models of version control. In the end, considering the actuality of SCM, it proposes a brand-new solution for software development repository on the basis of Subversion technology.%  Subversion是一个全新的自由/开源的版本控制系统,用户可用它方便地实现版本管理。本文首先描述了Subversion的特性和架构,然后介绍了版本控制的“锁定-修改-解锁”和“复制-修改-合并”两种模型,并比较这两种加锁策略的优劣,最后结合当前软件配置管理的现状,提出了一种使用 Subversion技术建立软件开发库的方案。

  4. The rise of photoresponsive protein technologies applications in vivo: a spotlight on zebrafish developmental and cell biology [version 1; referees: 2 approved

    Directory of Open Access Journals (Sweden)

    Renee Wei-Yan Chow

    2017-04-01

    Full Text Available The zebrafish (Danio rerio is a powerful vertebrate model to study cellular and developmental processes in vivo. The optical clarity and their amenability to genetic manipulation make zebrafish a model of choice when it comes to applying optical techniques involving genetically encoded photoresponsive protein technologies. In recent years, a number of fluorescent protein and optogenetic technologies have emerged that allow new ways to visualize, quantify, and perturb developmental dynamics. Here, we explain the principles of these new tools and describe some of their representative applications in zebrafish.

  5. Validation of the Greek version of the device subscale of the Quebec User Evaluation of Satisfaction with Assistive Technology 2.0 (QUEST 2.0).

    Science.gov (United States)

    Koumpouros, Yiannis; Karavasili, Alexandra; Papageorgiou, Effie; Siavelis, Panagiotis

    2016-01-01

    The purpose of the study was to evaluate the device subscale of the QUEST 2.0 instrument and provide evidence for the validity and reliability of the Greek version. To this end, a cross-cultural adaptation was performed. Field test studies were conducted to validate the appropriateness of the final outcome. Data were drawn from a study of 115 subjects who had been administered the GR-QUEST questionnaire. Ratings related to the different items were statistically analyzed. The exploratory factor analysis with varimax rotation conducted revealed a three factors structure of the device subscale in contrast with previous studies. Our "Safe Use" subscale contains the items adjustments, safety and effectiveness of the original instrument, the "Fit to Use" subscale contains the dimensions, weight and ease of use items, and the "Endurance" subscale contains the items durability and comfort of the original questionnaire. Reliability measures (ICC=0.949, Pearson´s correlation=0.903, Cronbach´s α=0.754) yielded high values. Test-retest outcome showed great stability. Based on the results, the GR-QUEST can be considered as a valid and reliable instrument and thus it can be used to measure the satisfaction of patients with assistive devices, while it is applicable to the Greek population. Further assessment of the services subscale is needed.

  6. Arts and science under the sign of Leonardo. The case of the National Museum of Science and Technology ‘Leonardo da Vinci’ of Milan (Italian original version

    Directory of Open Access Journals (Sweden)

    Claudio Giorgione

    2009-06-01

    Full Text Available Drawing on the example of Leonardo da Vinci, who was able to combine arts and science in his work, the National Museum of Science and Technology of Milan has always pursued the blending and the dialogue of humanistic and scientific knowledge. It has employed this approach in all of its activities, from the set design of exhibition departments to the acquisition of collections and, more recently, in the dialogue with the public. Now more than ever, following a renewal path for the Museum, these guidelines are being subject to research to achieve a new and more up-to-date interpretation.

  7. Versioning Complex Data

    Energy Technology Data Exchange (ETDEWEB)

    Macduff, Matt C.; Lee, Benno; Beus, Sherman J.

    2014-06-29

    Using the history of ARM data files, we designed and demonstrated a data versioning paradigm that is feasible. Assigning versions to sets of files that are modified with some special assumptions and domain specific rules was effective in the case of ARM data, which has more than 5000 datastreams and 500TB of data.

  8. The potential for distributed generation in Japanese prototype buildings: A DER-CAM analysis of policy, tariff design, building energy use, and technology development (English Version)

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Nan; Marnay, Chris; Firestone, Ryan; Gao, Weijun; Nishida, Masaru

    2004-10-15

    The August 2003 blackout of the northeastern U.S. and CANADA caused great economic losses and inconvenience to New York City and other affected areas. The blackout was a warning to the rest of the world that the ability of conventional power systems to meet growing electricity demand is questionable. Failure of large power systems can lead to serious emergencies. Introduction of on-site generation, renewable energy such as solar and wind power and the effective utilization of exhaust heat is needed, to meet the growing energy demands of the residential and commercial sectors. Additional benefit can be achieved by integrating these distributed technologies into distributed energy resource (DER) systems. This work demonstrates a method for choosing and designing economically optimal DER systems. An additional purpose of this research is to establish a database of energy tariffs, DER technology cost and performance characteristics, and building energy consumption for Japan. This research builds on prior DER studies at the Ernest Orlando Lawrence Berkeley National Laboratory (LBNL) and with their associates in the Consortium for Electric Reliability Technology Solutions (CERTS) and operation, including the development of the microgrid concept, and the DER selection optimization program, the Distributed Energy Resources Customer Adoption Model (DER-CAM). DER-CAM is a tool designed to find the optimal combination of installed equipment and an idealized operating schedule to minimize a site's energy bills, given performance and cost data on available DER technologies, utility tariffs, and site electrical and thermal loads over a test period, usually an historic year. Since hourly electric and thermal energy data are rarely available, they are typically developed by building simulation for each of six end use loads used to model the building: electric-only loads, space heating, space cooling, refrigeration, water heating, and natural-gas-only loads. DER-CAM provides a

  9. The potential for distributed generation in Japanese prototype buildings: A DER-CAM analysis of policy, tariff design, building energy use, and technology development (English Version)

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Nan; Marnay, Chris; Firestone, Ryan; Gao, Weijun; Nishida, Masaru

    2004-10-15

    The August 2003 blackout of the northeastern U.S. and CANADA caused great economic losses and inconvenience to New York City and other affected areas. The blackout was a warning to the rest of the world that the ability of conventional power systems to meet growing electricity demand is questionable. Failure of large power systems can lead to serious emergencies. Introduction of on-site generation, renewable energy such as solar and wind power and the effective utilization of exhaust heat is needed, to meet the growing energy demands of the residential and commercial sectors. Additional benefit can be achieved by integrating these distributed technologies into distributed energy resource (DER) systems. This work demonstrates a method for choosing and designing economically optimal DER systems. An additional purpose of this research is to establish a database of energy tariffs, DER technology cost and performance characteristics, and building energy consumption for Japan. This research builds on prior DER studies at the Ernest Orlando Lawrence Berkeley National Laboratory (LBNL) and with their associates in the Consortium for Electric Reliability Technology Solutions (CERTS) and operation, including the development of the microgrid concept, and the DER selection optimization program, the Distributed Energy Resources Customer Adoption Model (DER-CAM). DER-CAM is a tool designed to find the optimal combination of installed equipment and an idealized operating schedule to minimize a site's energy bills, given performance and cost data on available DER technologies, utility tariffs, and site electrical and thermal loads over a test period, usually an historic year. Since hourly electric and thermal energy data are rarely available, they are typically developed by building simulation for each of six end use loads used to model the building: electric-only loads, space heating, space cooling, refrigeration, water heating, and natural-gas-only loads. DER-CAM provides a

  10. Version pressure feedback mechanisms for speculative versioning caches

    Science.gov (United States)

    Eichenberger, Alexandre E.; Gara, Alan; O& #x27; Brien, Kathryn M.; Ohmacht, Martin; Zhuang, Xiaotong

    2013-03-12

    Mechanisms are provided for controlling version pressure on a speculative versioning cache. Raw version pressure data is collected based on one or more threads accessing cache lines of the speculative versioning cache. One or more statistical measures of version pressure are generated based on the collected raw version pressure data. A determination is made as to whether one or more modifications to an operation of a data processing system are to be performed based on the one or more statistical measures of version pressure, the one or more modifications affecting version pressure exerted on the speculative versioning cache. An operation of the data processing system is modified based on the one or more determined modifications, in response to a determination that one or more modifications to the operation of the data processing system are to be performed, to affect the version pressure exerted on the speculative versioning cache.

  11. 基于Web Service技术的教务管理系统Android版设计%The Android Version' Design of Educational Administration Management System Based on Web Service Technology

    Institute of Scientific and Technical Information of China (English)

    张志东; 王玉清

    2015-01-01

    本文通过设计Android版的教务系统客户端,详细描述了通过创建Web Service平台连接oracle数据库的方法,android客户端通过ksoap2-android类访问Web Service平台的方法,最后实现Android客户端访问oracle数据库.并介绍了其中关键技术,最后给出了开发android系统时操作大型数据库的方法.%By designing the senate clients version of android system in managing the educational administration,this paper made detailed description about the methods to connect oracle database by creating a web service platform,and that android clients get access to web service platform through ksoap2-android class,and ultimately get access to the oracle database.This paper also introduced the key technologies above and the strategies on ifnally operating a large database when developing android system.

  12. Transfinite Version of Welter's Game

    OpenAIRE

    Abuku, Tomoaki

    2017-01-01

    We study the transfinite version of Welter's Game, a combinatorial game, which is played on the belt divided into squares with general ordinal numbers extended from natural numbers. In particular, we obtain a straight-forward solution for the transfinite version based on those of the transfinite version of Nim and the original version of Welter's Game.

  13. ARROW (Version 2) Commercial Software Validation and Configuration Control

    Energy Technology Data Exchange (ETDEWEB)

    HEARD, F.J.

    2000-02-10

    ARROW (Version 2), a compressible flow piping network modeling and analysis computer program from Applied Flow Technology, was installed for use at the U.S. Department of Energy Hanford Site near Richland, Washington.

  14. AERONET Version 3 processing

    Science.gov (United States)

    Holben, B. N.; Slutsker, I.; Giles, D. M.; Eck, T. F.; Smirnov, A.; Sinyuk, A.; Schafer, J.; Rodriguez, J.

    2014-12-01

    The Aerosol Robotic Network (AERONET) database has evolved in measurement accuracy, data quality products, availability to the scientific community over the course of 21 years with the support of NASA, PHOTONS and all federated partners. This evolution is periodically manifested as a new data version release by carefully reprocessing the entire database with the most current algorithms that fundamentally change the database and ultimately the data products used by the community. The newest processing, Version 3, will be released in 2015 after the entire database is reprocessed and real-time data processing becomes operational. All V 3 algorithms have been developed, individually vetted and represent four main categories: aerosol optical depth (AOD) processing, inversion processing, database management and new products. The primary trigger for release of V 3 lies with cloud screening of the direct sun observations and computation of AOD that will fundamentally change all data available for analysis and all subsequent retrieval products. This presentation will illustrate the innovative approach used for cloud screening and assesses the elements of V3 AOD relative to the current version. We will also present the advances in the inversion product processing with emphasis on the random and systematic uncertainty estimates. This processing will be applied to the new hybrid measurement scenario intended to provide inversion retrievals for all solar zenith angles. We will introduce automatic quality assurance criteria that will allow near real time quality assured aerosol products necessary for real time satellite and model validation and assimilation. Last we will introduce the new management structure that will improve access to the data database. The current version 2 will be supported for at least two years after the initial release of V3 to maintain continuity for on going investigations.

  15. Technology.

    Science.gov (United States)

    Online-Offline, 1998

    1998-01-01

    Focuses on technology, on advances in such areas as aeronautics, electronics, physics, the space sciences, as well as computers and the attendant progress in medicine, robotics, and artificial intelligence. Describes educational resources for elementary and middle school students, including Web sites, CD-ROMs and software, videotapes, books,…

  16. PVWatts Version 5 Manual

    Energy Technology Data Exchange (ETDEWEB)

    Dobos, A. P.

    2014-09-01

    The NREL PVWatts calculator is a web application developed by the National Renewable Energy Laboratory (NREL) that estimates the electricity production of a grid-connected photovoltaic system based on a few simple inputs. PVWatts combines a number of sub-models to predict overall system performance, and makes includes several built-in parameters that are hidden from the user. This technical reference describes the sub-models, documents assumptions and hidden parameters, and explains the sequence of calculations that yield the final system performance estimate. This reference is applicable to the significantly revised version of PVWatts released by NREL in 2014.

  17. Nuflood, Version 1.x

    Energy Technology Data Exchange (ETDEWEB)

    2016-07-29

    NUFLOOD Version 1.x is a surface-water hydrodynamic package designed for the simulation of overland flow of fluids. It consists of various routines to address a wide range of applications (e.g., rainfall-runoff, tsunami, storm surge) and real time, interactive visualization tools. NUFLOOD has been designed for general-purpose computers and workstations containing multi-core processors and/or graphics processing units. The software is easy to use and extensible, constructed in mind for instructors, students, and practicing engineers. NUFLOOD is intended to assist the water resource community in planning against water-related natural disasters.

  18. TOGAF version 9

    CERN Document Server

    Group, The Open

    2010-01-01

    This is the official Open Group Pocket Guide for TOGAF Version 9 Enterprise Edition. This pocket guide is published by Van Haren Publishing on behalf of The Open Group.TOGAF, The Open Group Architectural Framework is a fast growing, worldwide accepted standard that can help organisations build their own Enterprise Architecture in a standardised way. This book explains why the in?s and out?s of TOGAF in a concise manner.This book explains how TOGAF can help to make an Enterprise Architecture. Enterprise Architecture is an approach that can help management to understand this growing complexity.

  19. URGENCES NOUVELLE VERSION

    CERN Multimedia

    Medical Service

    2002-01-01

    The table of emergency numbers that appeared in Bulletin 10/2002 is out of date. The updated version provided by the Medical Service appears on the following page. Please disregard the previous version. URGENT NEED OF A DOCTOR GENEVAPATIENT NOT FIT TO BE MOVED: Call your family doctor Or SOS MEDECINS (24H/24H) 748 49 50 Or ASSOC. OF GENEVA DOCTORS (7H-23H) 322 20 20 PATIENT CAN BE MOVED: HOPITAL CANTONAL 24 Micheli du Crest 372 33 11 382 33 11 CHILDREN'S HOSPITAL 6 rue Willy Donzé 382 68 18 382 45 55 MATERNITY 24 Micheli du Crest 382 68 16 382 33 11 OPHTALMOLOGY 22 Alcide Jentzer 382 84 00 HOPITAL DE LA TOUR Meyrin 719 61 11 CENTRE MEDICAL DE MEYRIN Champs Fréchets 719 74 00 URGENCES : FIRE BRIGADE 118 FIRE BRIGADE CERN 767 44 44 BESOIN URGENT D'AMBULANCE (GENEVE ET VAUD) : 144 POLICE 117 ANTI-POISON CENTRE 24H/24H 01 251 51 510 EUROPEAN EMERGENCY CALL: 112 FRANCE PATIENT NOT FIT TO BE MOVED: call your family doctor PATIENT CAN BE MOVED: ST. JULIE...

  20. Technology

    Directory of Open Access Journals (Sweden)

    Xu Jing

    2016-01-01

    Full Text Available The traditional answer card reading method using OMR (Optical Mark Reader, most commonly, OMR special card special use, less versatile, high cost, aiming at the existing problems proposed a method based on pattern recognition of the answer card identification method. Using the method based on Line Segment Detector to detect the tilt of the image, the existence of tilt image rotation correction, and eventually achieve positioning and detection of answers to the answer sheet .Pattern recognition technology for automatic reading, high accuracy, detect faster

  1. Trace contaminant control simulation computer program, version 8.1

    Science.gov (United States)

    Perry, J. L.

    1994-01-01

    The Trace Contaminant Control Simulation computer program is a tool for assessing the performance of various process technologies for removing trace chemical contamination from a spacecraft cabin atmosphere. Included in the simulation are chemical and physical adsorption by activated charcoal, chemical adsorption by lithium hydroxide, absorption by humidity condensate, and low- and high-temperature catalytic oxidation. Means are provided for simulating regenerable as well as nonregenerable systems. The program provides an overall mass balance of chemical contaminants in a spacecraft cabin given specified generation rates. Removal rates are based on device flow rates specified by the user and calculated removal efficiencies based on cabin concentration and removal technology experimental data. Versions 1.0 through 8.0 are documented in NASA TM-108409. TM-108409 also contains a source file listing for version 8.0. Changes to version 8.0 are documented in this technical memorandum and a source file listing for the modified version, version 8.1, is provided. Detailed descriptions for the computer program subprograms are extracted from TM-108409 and modified as necessary to reflect version 8.1. Version 8.1 supersedes version 8.0. Information on a separate user's guide is available from the author.

  2. LHC brochure (English version)

    CERN Multimedia

    Lefevre, C

    2010-01-01

    A presentation of the largest and the most powerful particle accelerator in the world, the Large Hadron Collider (LHC), which started up in 2008. Its role, characteristics, technologies, etc. are explained for the general public.

  3. LHC brochure (Italian version)

    CERN Multimedia

    Lefevre, Christiane

    2011-01-01

    A presentation of the largest and the most powerful particle accelerator in the world, the Large Hadron Collider (LHC), which started up in 2008. Its role, characteristics, technologies, etc. are explained for the general public.

  4. LHC brochure (German version)

    CERN Multimedia

    Lefevre, Christiane

    2011-01-01

    A presentation of the largest and the most powerful particle accelerator in the world, the Large Hadron Collider (LHC), which will start-up in 2008. Its role, characteristics, technologies, etc. are explained for the general public.

  5. LHC brochure (Danish version)

    CERN Multimedia

    Lefevre, C

    2010-01-01

    A presentation of the largest and the most powerful particle accelerator in the world, the Large Hadron Collider (LHC), which started up in 2008. Its role, characteristics, technologies, etc. are explained for the general public.

  6. LHC brochure (French version)

    CERN Multimedia

    Lefevre, C

    2010-01-01

    A presentation of the largest and the most powerful particle accelerator in the world, the Large Hadron Collider (LHC), which started up in 2008. Its role, characteristics, technologies, etc. are explained for the general public.

  7. LHC brochure (English version)

    CERN Multimedia

    Lefevre, C

    2009-01-01

    A presentation of the largest and the most powerful particle accelerator in the world, the Large Hadron Collider (LHC), which started up in 2008. Its role, characteristics, technologies, etc. are explained for the general public.

  8. LHC brochure (German version)

    CERN Multimedia

    Marcastel, Fabienne

    2014-01-01

    A presentation of the largest and the most powerful particle accelerator in the world, the Large Hadron Collider (LHC), which started up in 2008. Its role, characteristics, technologies, etc. are explained for the general public.

  9. LHC brochure (French version)

    CERN Multimedia

    Marcastel, Fabienne

    2014-01-01

    A presentation of the largest and the most powerful particle accelerator in the world, the Large Hadron Collider (LHC), which started up in 2008. Its role, characteristics, technologies, etc. are explained for the general public.

  10. LHC brochure (English version)

    CERN Multimedia

    AUTHOR|(CDS)2070305

    2014-01-01

    A presentation of the largest and the most powerful particle accelerator in the world, the Large Hadron Collider (LHC), which started up in 2008. Its role, characteristics, technologies, etc. are explained for the general public.

  11. LHC brochure (Spanish version)

    CERN Multimedia

    Lefevre, C

    2008-01-01

    A presentation of the largest and the most powerful particle accelerator in the world, the Large Hadron Collider (LHC), which will start-up in 2008. Its role, characteristics, technologies, etc. are explained for the general public.

  12. LHC brochure (Polish version)

    CERN Multimedia

    Lefevre, C

    2008-01-01

    A presentation of the largest and the most powerful particle accelerator in the world, the Large Hadron Collider (LHC), which will start-up in 2008. Its role, characteristics, technologies, etc. are explained for the general public.

  13. LHC brochure (Greek version)

    CERN Multimedia

    Lefèvre, C

    2006-01-01

    A presentation of the largest and the most powerful particle accelerator in the world, the Large Hadron Collider (LHC), which will start-up in 2008. Its role, characteristics, technologies, etc. are explained for the general public.

  14. LHC Brochure (norwegian version)

    CERN Multimedia

    Marcastel, F

    2006-01-01

    A presentation of the largest and the most powerful particle accelerator in the world, the Large Hadron Collider (LHC), which will start-up in 2008. Its role, characteristics, technologies, etc. are explained for the general public.

  15. LHC brochure (Norwegian version)

    CERN Multimedia

    Lefevre, C

    2009-01-01

    A presentation of the largest and the most powerful particle accelerator in the world, the Large Hadron Collider (LHC), which will start up in 2008. Its role, characteristics, technologies, etc. are explained for the general public.

  16. LHC Brochure (catalan version)

    CERN Multimedia

    Marcastel, F

    2006-01-01

    A presentation of the largest and the most powerful particle accelerator in the world, the Large Hadron Collider (LHC), which will start-up in 2008. Its role, characteristics, technologies, etc. are explained for the general public.

  17. LHC brochure (Catalan version)

    CERN Multimedia

    Lefevre, C

    2008-01-01

    A presentation of the largest and the most powerful particle accelerator in the world, the Large Hadron Collider (LHC), which will start-up in 2008. Its role, characteristics, technologies, etc. are explained for the general public.

  18. Solar Advisor Model User Guide for Version 2.0

    Energy Technology Data Exchange (ETDEWEB)

    Gilman, P.; Blair, N.; Mehos, M.; Christensen, C.; Janzou, S.; Cameron, C.

    2008-08-01

    The Solar Advisor Model (SAM) provides a consistent framework for analyzing and comparing power system costs and performance across the range of solar technologies and markets, from photovoltaic systems for residential and commercial markets to concentrating solar power and large photovoltaic systems for utility markets. This manual describes Version 2.0 of the software, which can model photovoltaic and concentrating solar power technologies for electric applications for several markets. The current version of the Solar Advisor Model does not model solar heating and lighting technologies.

  19. Cryptanalysis of Achterbahn-Version 1 and -Version 2

    Institute of Scientific and Technical Information of China (English)

    Xiao-Li Huang; Chuan-Kun Wu

    2007-01-01

    Achterbahn is one of the candidate stream ciphers submitted to the eSTREAM, which is the ECRYPT StreamCipher Project. The cipher Achterbahn uses a new structure which is based on several nonlinear feedback shift registers(NLFSR) and a nonlinear combining output Boolean function. This paper proposes distinguishing attacks on Achterbahn-Version 1 and -Version 2 on the reduced mode and the full mode. These distinguishing attacks are based on linear approxi-mations of the output functions. On the basis of these linear approximations and the periods of the registers, parity checkswith noticeable biases are found. Then distinguishing attacks can be achieved through these biased parity checks. As toAchterbahn-Version 1, three cases that the output function has three possibilities are analyzed. Achterbahn-Version 2, themodification version of Achterbahn-Version 1, is designed to avert attacks based on approximations of the output Booleanfunction. Our attack with even much lower complexities on Achterbahn-Version 2 shows that Achterbahn-Version 2 cannotprevent attacks based on linear approximations.

  20. GNU Octave Manual Version 3

    DEFF Research Database (Denmark)

    W. Eaton, John; Bateman, David; Hauberg, Søren

    This manual is the definitive guide to GNU Octave, an interactive environment for numerical computation. The manual covers the new version 3 of GNU Octave.......This manual is the definitive guide to GNU Octave, an interactive environment for numerical computation. The manual covers the new version 3 of GNU Octave....

  1. brulilo, Version 0.x

    Energy Technology Data Exchange (ETDEWEB)

    2015-04-16

    effectively remove some of the stiffness and allow for efficient explicit integration techniques to be used. The original intent of brulilo was to implement these stiffness-alleviating techniques with explicit integrators and compare the performance to traditional implicit integrations of the full stiff system. This is still underway, as the code is very much in an alpha-release state. Furthermore, explicit integrators are often much easier to parallelize than their implicit counterparts. brulilo will implement parallelization of these techniques, leveraging both the Python implementation of MPI, mpi4py, as well as highly parallelized versions targeted at GPUs with PyOpenCL and/or PyCUDA.

  2. ALT-3 Target & CMU Version 4

    Energy Technology Data Exchange (ETDEWEB)

    Griego, Jeffrey R [Los Alamos National Laboratory; Atchison, Walter L. [Los Alamos National Laboratory; Holtkamp, David [Los Alamos National Laboratory; Oro, David M. [Los Alamos National Laboratory; Reinovsky, Robert E. [Los Alamos National Laboratory; Rousculp, Christopher L. [Los Alamos National Laboratory; Tabaka, Leonard J. [Los Alamos National Laboratory

    2012-06-11

    The third Advance Liner Technology (ALT-3) experiment is the next in a long tradition of collaborations between LANL and RFNC/VNIIEF in high-explosive pulsed-power. Here a VNIIEF provided Disk Explosive Magnetic Generator (DEMG) will drive a LANL provided experimental load and diagnostic package. The objective of the experiment is to explore the use of a cylindrical liner-ontarget in tera-Pascal equation of state measurement. This presentation will discuss version 4 of the experimental target and central measuring unit (CMU) along with R & D already performed in fabrication of the target.

  3. Enigma Version 12

    Science.gov (United States)

    Shores, David; Goza, Sharon P.; McKeegan, Cheyenne; Easley, Rick; Way, Janet; Everett, Shonn; Guerra, Mark; Kraesig, Ray; Leu, William

    2013-01-01

    Enigma Version 12 software combines model building, animation, and engineering visualization into one concise software package. Enigma employs a versatile user interface to allow average users access to even the most complex pieces of the application. Using Enigma eliminates the need to buy and learn several software packages to create an engineering visualization. Models can be created and/or modified within Enigma down to the polygon level. Textures and materials can be applied for additional realism. Within Enigma, these models can be combined to create systems of models that have a hierarchical relationship to one another, such as a robotic arm. Then these systems can be animated within the program or controlled by an external application programming interface (API). In addition, Enigma provides the ability to use plug-ins. Plugins allow the user to create custom code for a specific application and access the Enigma model and system data, but still use the Enigma drawing functionality. CAD files can be imported into Enigma and combined to create systems of computer graphics models that can be manipulated with constraints. An API is available so that an engineer can write a simulation and drive the computer graphics models with no knowledge of computer graphics. An animation editor allows an engineer to set up sequences of animations generated by simulations or by conceptual trajectories in order to record these to highquality media for presentation. Enigma Version 12 Lyndon B. Johnson Space Center, Houston, Texas 28 NASA Tech Briefs, September 2013 Planetary Protection Bioburden Analysis Program NASA's Jet Propulsion Laboratory, Pasadena, California This program is a Microsoft Access program that performed statistical analysis of the colony counts from assays performed on the Mars Science Laboratory (MSL) spacecraft to determine the bioburden density, 3-sigma biodensity, and the total bioburdens required for the MSL prelaunch reports. It also contains numerous

  4. Mission Data System Java Edition Version 7

    Science.gov (United States)

    Reinholtz, William K.; Wagner, David A.

    2013-01-01

    The Mission Data System framework defines closed-loop control system abstractions from State Analysis including interfaces for state variables, goals, estimators, and controllers that can be adapted to implement a goal-oriented control system. The framework further provides an execution environment that includes a goal scheduler, execution engine, and fault monitor that support the expression of goal network activity plans. Using these frameworks, adapters can build a goal-oriented control system where activity coordination is verified before execution begins (plan time), and continually during execution. Plan failures including violations of safety constraints expressed in the plan can be handled through automatic re-planning. This version optimizes a number of key interfaces and features to minimize dependencies, performance overhead, and improve reliability. Fault diagnosis and real-time projection capabilities are incorporated. This version enhances earlier versions primarily through optimizations and quality improvements that raise the technology readiness level. Goals explicitly constrain system states over explicit time intervals to eliminate ambiguity about intent, as compared to command-oriented control that only implies persistent intent until another command is sent. A goal network scheduling and verification process ensures that all goals in the plan are achievable before starting execution. Goal failures at runtime can be detected (including predicted failures) and handled by adapted response logic. Responses can include plan repairs (try an alternate tactic to achieve the same goal), goal shedding, ignoring the fault, cancelling the plan, or safing the system.

  5. EOSlib, Version 3

    Energy Technology Data Exchange (ETDEWEB)

    2017-02-03

    Equilibrium thermodynamics underpins many of the technologies used throughout theoretical physics, yet verification of the various theoretical models in the open literature remains challenging. EOSlib provides a single, consistent, verifiable implementation of these models, in a single, easy-to-use software package. It consists of three parts: a software library implementing various published equation-of-state (EOS) models; a database of fitting parameters for various materials for these models; and a number of useful utility functions for simplifying thermodynamic calculations such as computing Hugoniot curves or Riemann problem solutions. Ready availability of this library will enable reliable code-to- code testing of equation-of-state implementations, as well as a starting point for more rigorous verification work. EOSlib also provides a single, consistent API for its analytic and tabular EOS models, which simplifies the process of comparing models for a particular application.

  6. Ergonomics technology

    Science.gov (United States)

    Jones, W. L.

    1977-01-01

    Major areas of research and development in ergonomics technology for space environments are discussed. Attention is given to possible applications of the technology developed by NASA in industrial settings. A group of mass spectrometers for gas analysis capable of fully automatic operation has been developed for atmosphere control on spacecraft; a version for industrial use has been constructed. Advances have been made in personal cooling technology, remote monitoring of medical information, and aerosol particle control. Experience gained by NASA during the design and development of portable life support units has recently been applied to improve breathing equipment used by fire fighters.

  7. Version Description and Installation Guide Kernel Version 3.0

    Science.gov (United States)

    1989-12-01

    approved for publication. FOR THE COMMANDER Karl H. Shingler SEI Joint Program Office This work is sponsored by the U.S. Department of Defense. Copyright...8217version’ * $ append/new-version tcl .lis,tc2. lise ,t3 .lis,tc4.lis - [dark -cm. dcc. vdiq]contents -of -’version’ $ delete tcl.lis;,tc2.lis;,tc3.lis...INOIVIOUAL 22b. TELEPHONE NUMBER 22c. OFFICE SYMBOL KARL H. SHINGLER (include A’a Code) 1, 412 268-7630 SEI JPO 00 FORM 1473.83 APR EITION OF JAN 73 IS OBSOLETE. I i SECURITY CLASSIFICATION OF THIS PAGE

  8. GENII Version 2 Users’ Guide

    Energy Technology Data Exchange (ETDEWEB)

    Napier, Bruce A.

    2004-03-08

    The GENII Version 2 computer code was developed for the Environmental Protection Agency (EPA) at Pacific Northwest National Laboratory (PNNL) to incorporate the internal dosimetry models recommended by the International Commission on Radiological Protection (ICRP) and the radiological risk estimating procedures of Federal Guidance Report 13 into updated versions of existing environmental pathway analysis models. The resulting environmental dosimetry computer codes are compiled in the GENII Environmental Dosimetry System. The GENII system was developed to provide a state-of-the-art, technically peer-reviewed, documented set of programs for calculating radiation dose and risk from radionuclides released to the environment. The codes were designed with the flexibility to accommodate input parameters for a wide variety of generic sites. Operation of a new version of the codes, GENII Version 2, is described in this report. Two versions of the GENII Version 2 code system are available, a full-featured version and a version specifically designed for demonstrating compliance with the dose limits specified in 40 CFR 61.93(a), the National Emission Standards for Hazardous Air Pollutants (NESHAPS) for radionuclides. The only differences lie in the limitation of the capabilities of the user to change specific parameters in the NESHAPS version. This report describes the data entry, accomplished via interactive, menu-driven user interfaces. Default exposure and consumption parameters are provided for both the average (population) and maximum individual; however, these may be modified by the user. Source term information may be entered as radionuclide release quantities for transport scenarios, or as basic radionuclide concentrations in environmental media (air, water, soil). For input of basic or derived concentrations, decay of parent radionuclides and ingrowth of radioactive decay products prior to the start of the exposure scenario may be considered. A single code run can

  9. Ultrasonic Guided Wave Technology for Non-invasive Assessment of Corrosion-induced Damage in Piping for Pollution Prevention in DOD Fuel Storage Facilities. Cost and Performance Report. Version 2

    Science.gov (United States)

    2011-09-01

    INTRODUCTION .........................................................................................................3 1.1 BACKGROUND... INTRODUCTION The Oil Pollution Act (OPA) of 1990 sets up operational and maintenance requirements for DOD and civilian fuel/oil storage and transport...5.2.3 Design and layout of technology The ultrasonic guided wave measurement system started with bonding magnetostrictive metal strips to the pipe

  10. [Software version and medical device software supervision].

    Science.gov (United States)

    Peng, Liang; Liu, Xiaoyan

    2015-01-01

    The importance of software version in the medical device software supervision does not cause enough attention at present. First of all, the effect of software version in the medical device software supervision is discussed, and then the necessity of software version in the medical device software supervision is analyzed based on the discussion of the misunderstanding of software version. Finally the concrete suggestions on software version naming rules, software version supervision for the software in medical devices, and software version supervision scheme are proposed.

  11. Converge, Version 3.0

    Directory of Open Access Journals (Sweden)

    Lotfi Tadj

    1993-01-01

    Full Text Available Although intended for college teachers/students, Converge presents a feature that may interest all scientists: it allows an easy export of graphic files to most known word processors, specifically to the ℙ, Version 2.1, a powerful WYSIWYG mathematical word processor.

  12. Constructive version of Boolean algebra

    CERN Document Server

    Ciraulo, Francesco; Toto, Paola

    2012-01-01

    The notion of overlap algebra introduced by G. Sambin provides a constructive version of complete Boolean algebra. Here we first show some properties concerning overlap algebras: we prove that the notion of overlap morphism corresponds classically to that of map preserving arbitrary joins; we provide a description of atomic set-based overlap algebras in the language of formal topology, thus giving a predicative characterization of discrete locales; we show that the power-collection of a set is the free overlap algebra join-generated from the set. Then, we generalize the concept of overlap algebra and overlap morphism in various ways to provide constructive versions of the category of Boolean algebras with maps preserving arbitrary existing joins.

  13. Online Cake Cutting (published version)

    CERN Document Server

    Walsh, Toby

    2011-01-01

    We propose an online form of the cake cutting problem. This models situations where agents arrive and depart during the process of dividing a resource. We show that well known fair division procedures like cut-and-choose and the Dubins-Spanier moving knife procedure can be adapted to apply to such online problems. We propose some fairness properties that online cake cutting procedures can possess like online forms of proportionality and envy-freeness. We also consider the impact of collusion between agents. Finally, we study theoretically and empirically the competitive ratio of these online cake cutting procedures. Based on its resistance to collusion, and its good performance in practice, our results favour the online version of the cut-and-choose procedure over the online version of the moving knife procedure.

  14. Neutrino Mass Seesaw Version 3: Recent Developments

    CERN Document Server

    Ma, Ernest

    2009-01-01

    The origin of neutrino mass is usually attributed to a seesaw mechanism, either through a heavy Majorana fermion singlet (version 1) or a heavy scalar triplet (version 2). Recently, the idea of using a heavy Majorana fermion triplet (version 3) has gained some attention. This is a review of the basic idea involved, its U(1) gauge extension, and some recent developments.

  15. Embrittlement data base, version 1

    Energy Technology Data Exchange (ETDEWEB)

    Wang, J.A.

    1997-08-01

    The aging and degradation of light-water-reactor (LWR) pressure vessels is of particular concern because of their relevance to plant integrity and the magnitude of the expected irradiation embrittlement. The radiation embrittlement of reactor pressure vessel (RPV) materials depends on many different factors such as flux, fluence, fluence spectrum, irradiation temperature, and preirradiation material history and chemical compositions. These factors must be considered to reliably predict pressure vessel embrittlement and to ensure the safe operation of the reactor. Based on embrittlement predictions, decisions must be made concerning operating parameters and issues such as low-leakage-fuel management, possible life extension, and the need for annealing the pressure vessel. Large amounts of data from surveillance capsules and test reactor experiments, comprising many different materials and different irradiation conditions, are needed to develop generally applicable damage prediction models that can be used for industry standards and regulatory guides. Version 1 of the Embrittlement Data Base (EDB) is such a comprehensive collection of data resulting from merging version 2 of the Power Reactor Embrittlement Data Base (PR-EDB). Fracture toughness data were also integrated into Version 1 of the EDB. For power reactor data, the current EDB lists the 1,029 Charpy transition-temperature shift data points, which include 321 from plates, 125 from forgoings, 115 from correlation monitor materials, 246 from welds, and 222 from heat-affected-zone (HAZ) materials that were irradiated in 271 capsules from 101 commercial power reactors. For test reactor data, information is available for 1,308 different irradiated sets (352 from plates, 186 from forgoings, 303 from correlation monitor materials, 396 from welds and 71 from HAZs) and 268 different irradiated plus annealed data sets.

  16. CMMI (Trademark) for Acquisition, Version 1.2

    Science.gov (United States)

    2007-11-01

    or established technologies to be applied, such as robotics, composite materials, or artificial intelligence ; and breadth of the functionality...you to align the way you do busines They allow you to address scalability and provide a way to incorpora knowledge of how to do things better. Processes...part by the selections made by the organization to meet its busine objectives. Tying It All Together 38 CMMI for Acquisition Version 1.2 4

  17. Efficient Management of Biomedical Ontology Versions

    Science.gov (United States)

    Kirsten, Toralf; Hartung, Michael; Groß, Anika; Rahm, Erhard

    Ontologies have become very popular in life sciences and other domains. They mostly undergo continuous changes and new ontology versions are frequently released. However, current analysis studies do not consider the ontology changes reflected in different versions but typically limit themselves to a specific ontology version which may quickly become obsolete. To allow applications easy access to different ontology versions we propose a central and uniform management of the versions of different biomedical ontologies. The proposed database approach takes concept and structural changes of succeeding ontology versions into account thereby supporting different kinds of change analysis. Furthermore, it is very space-efficient by avoiding redundant storage of ontology components which remain unchanged in different versions. We evaluate the storage requirements and query performance of the proposed approach for the Gene Ontology.

  18. SDI Software Technology Program Plan Version 1.5

    Science.gov (United States)

    1987-06-01

    part of a larger project to produce an Ada language system for a distributed network of computers[Fisher 86]. 3 The StarLite software prototyping...Proposal No. CS-DOD/ARMY- 3184-86, (July 1985). 5 [Cook 85b] Cook, Robert P. and Auletta, Richard J., StarLite , A Visual Simulation Package for Software

  19. DOD Information Technology Standard Guidance (ITSG) Version 3.1

    Science.gov (United States)

    1997-04-07

    data and metadata and can be applied to them. d. NIST FIPS 183: IDEFO e. NIST FIPS 184: IDEFIX f. Data element standards in the datz dictionary BSA...183: IDEFO e. NIST FIPS 184: IDEFIX f. Data element standards in the data dictionary BSA, above. 3.9.3.3.6 Recommendations. IRDS, FIPS 156, is

  20. Training Technology Handbook for System Acquisition Planners: Preliminary Version.

    Science.gov (United States)

    1981-09-01

    existing system data. to the new system. The check- list in Table 3 is an aid to this process. What are the training Training resource data of a simi...given design concept. place a Table 3 and the procedures for using the table are Intended check in the "common (C)" column to indicate that the as an aid ...ION ALL COINTROLS XIAPNL IN VIH €1U11T- OPTIMALLY L OCALIs T-I E ElsA IEI MALFUNCTIOW TO THE CO--- INRT o I*LEVEL TWDE O IS EDS TEAR DOE %AIll ow

  1. Hiroshima University Research and Technology Guide 2012 Version : Life Science

    OpenAIRE

    Center for Collaborative Research & Community Cooperation,

    2012-01-01

    I Life ScienceDevelopment of Treatment Strategy for Hepatocellular Carcinoma to Improve the Long Term Prognosis / Hiroshi AIKATA...2Development of Revolutional Apatite-implant Complex with Simultaneous Bone Augmentation and Osseointegration / Yasumasa AKAGAWA...3How Do Patients with Alzheimer’s Disease Experience Memory Impairments? / Sawako ARAI...4Development of New Therapies for Chronic Viral Hepatitis Using Human Hepatocyte Chimeric Mice / Kazuaki CHAYAMA...5Identification of High Risk Pa...

  2. Hiroshima University Research and Technology Guide 2012 Version : Life Science

    OpenAIRE

    Center for Collaborative Research & Community Cooperation,

    2012-01-01

    I Life ScienceDevelopment of Treatment Strategy for Hepatocellular Carcinoma to Improve the Long Term Prognosis / Hiroshi AIKATA...2Development of Revolutional Apatite-implant Complex with Simultaneous Bone Augmentation and Osseointegration / Yasumasa AKAGAWA...3How Do Patients with Alzheimer’s Disease Experience Memory Impairments? / Sawako ARAI...4Development of New Therapies for Chronic Viral Hepatitis Using Human Hepatocyte Chimeric Mice / Kazuaki CHAYAMA...5Identification of High Risk Pa...

  3. Space Images for NASA JPL Android Version

    Science.gov (United States)

    Nelson, Jon D.; Gutheinz, Sandy C.; Strom, Joshua R.; Arca, Jeremy M.; Perez, Martin; Boggs, Karen; Stanboli, Alice

    2013-01-01

    This software addresses the demand for easily accessible NASA JPL images and videos by providing a user friendly and simple graphical user interface that can be run via the Android platform from any location where Internet connection is available. This app is complementary to the iPhone version of the application. A backend infrastructure stores, tracks, and retrieves space images from the JPL Photojournal and Institutional Communications Web server, and catalogs the information into a streamlined rating infrastructure. This system consists of four distinguishing components: image repository, database, server-side logic, and Android mobile application. The image repository contains images from various JPL flight projects. The database stores the image information as well as the user rating. The server-side logic retrieves the image information from the database and categorizes each image for display. The Android mobile application is an interfacing delivery system that retrieves the image information from the server for each Android mobile device user. Also created is a reporting and tracking system for charting and monitoring usage. Unlike other Android mobile image applications, this system uses the latest emerging technologies to produce image listings based directly on user input. This allows for countless combinations of images returned. The backend infrastructure uses industry-standard coding and database methods, enabling future software improvement and technology updates. The flexibility of the system design framework permits multiple levels of display possibilities and provides integration capabilities. Unique features of the software include image/video retrieval from a selected set of categories, image Web links that can be shared among e-mail users, sharing to Facebook/Twitter, marking as user's favorites, and image metadata searchable for instant results.

  4. H2A Production Model, Version 2 User Guide

    Energy Technology Data Exchange (ETDEWEB)

    Steward, D.; Ramsden, T.; Zuboy, J.

    2008-09-01

    The H2A Production Model analyzes the technical and economic aspects of central and forecourt hydrogen production technologies. Using a standard discounted cash flow rate of return methodology, it determines the minimum hydrogen selling price, including a specified after-tax internal rate of return from the production technology. Users have the option of accepting default technology input values--such as capital costs, operating costs, and capacity factor--from established H2A production technology cases or entering custom values. Users can also modify the model's financial inputs. This new version of the H2A Production Model features enhanced usability and functionality. Input fields are consolidated and simplified. New capabilities include performing sensitivity analyses and scaling analyses to various plant sizes. This User Guide helps users already familiar with the basic tenets of H2A hydrogen production cost analysis get started using the new version of the model. It introduces the basic elements of the model then describes the function and use of each of its worksheets.

  5. The limits of mathematics alternative version

    CERN Document Server

    Chaitin, G J

    1994-01-01

    This is an alternative version of the course notes in chao-dyn/9407003. The previous version is based on measuring the size of lisp s-expressions. This version is based on measuring the size of what I call lisp m-expressions, which are lisp s-expressions with most parentheses omitted. This formulation of algorithmic information theory is harder to understand than the one that was presented in chao-dyn/9407003, but the constants obtained in all theorems are now less than half the size that they were before. It is not clear to me which version of algorithmic information theory is to be preferred.

  6. An Examination of the Design, Development, and Implementation of an Internet Protocol Version 6 Network: The ADTRAN Inc. Case Study

    Science.gov (United States)

    Perigo, Levi

    2013-01-01

    In this dissertation, the author examined the capabilities of Internet Protocol version 6 (IPv6) in regard to replacing Internet Protocol version 4 (IPv4) as the internetworking technology for Medium-sized Businesses (MBs) in the Information Systems (IS) field. Transition to IPv6 is inevitable, and, thus, organizations are adopting this protocol…

  7. MCNP(TM) Version 5.

    Energy Technology Data Exchange (ETDEWEB)

    Cox, L. J. (Lawrence J.); Barrett, R. F. (Richard F.); Booth, Thomas Edward; Briesmeister, Judith F.; Brown, F. B. (Forrest B.); Bull, J. S. (Jeffrey S.); Giesler, G. C. (Gregg Carl); Goorley, J. T. (John T.); Mosteller, R. D. (Russell D.); Forster, R. A. (R. Arthur); Post, S. E. (Susan E.); Prael, R. E. (Richard E.); Selcow, Elizabeth Carol,; Sood, A. (Avneet)

    2002-01-01

    The Monte Carlo transport workhorse, MCNP, is undergoing a massive renovation at Los Alamos National Laboratory (LANL) in support of the Eolus Project of the Advanced Simulation and Computing (ASCI) Program. MCNP Version 5 (V5) (expected to be released to RSICC in Spring, 2002) will consist of a major restructuring from FORTRAN-77 (with extensions) to ANSI-standard FORTRAN-90 with support for all of the features available in the present release (MCNP-4C2/4C3). To most users, the look-and-feel of MCNP will not change much except for the improvements (improved graphics, easier installation, better online documentation). For example, even with the major format change, full support for incremental patching will still be provided. In addition to the language and style updates, MCNP V5 will have various new user features. These include improved photon physics, neutral particle radiography, enhancements and additions to variance reduction methods, new source options, and improved parallelism support (PVM, MPI, OpenMP).

  8. SPAM- SPECTRAL ANALYSIS MANAGER (UNIX VERSION)

    Science.gov (United States)

    Solomon, J. E.

    1994-01-01

    machine environments. There is a DEC VAX/VMS version with a central memory requirement of approximately 242K of 8 bit bytes and a machine independent UNIX 4.2 version. The display device currently supported is the Raster Technologies display processor. Other 512 x 512 resolution color display devices, such as De Anza, may be added with minor code modifications. This program was developed in 1986.

  9. Global Historical Climatology Network - Daily (GHCN-Daily), Version 2 (Version Superseded)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Please note, this dataset has been superseded by a newer version (see below). Users should not use this version except in rare cases (e.g., when reproducing previous...

  10. Texts in multiple versions: histories of editions

    NARCIS (Netherlands)

    Giuliani, L.; Brinkman, H.; Lernout, G.; Mathijsen, M.

    2006-01-01

    Texts in multiple versions constitute the core problem of textual scholarship. For texts from antiquity and the medieval period, the many versions may be the result of manuscript transmission, requiring editors and readers to discriminate between levels of authority in variant readings produced

  11. Schema Versioning for Multitemporal Relational Databases.

    Science.gov (United States)

    De Castro, Cristina; Grandi, Fabio; Scalas, Maria Rita

    1997-01-01

    Investigates new design options for extended schema versioning support for multitemporal relational databases. Discusses the improved functionalities they may provide. Outlines options and basic motivations for the new design solutions, as well as techniques for the management of proposed schema versioning solutions, includes algorithms and…

  12. Distributed Version Control and Library Metadata

    Directory of Open Access Journals (Sweden)

    Galen M. Charlton

    2008-06-01

    Full Text Available Distributed version control systems (DVCSs are effective tools for managing source code and other artifacts produced by software projects with multiple contributors. This article describes DVCSs and compares them with traditional centralized version control systems, then describes extending the DVCS model to improve the exchange of library metadata.

  13. UPGRADES TO Monteburns, VERSION 3.0

    Energy Technology Data Exchange (ETDEWEB)

    Galloway, Jack D [Los Alamos National Laboratory; Trellue, Holly R [Los Alamos National Laboratory

    2012-06-22

    Monteburns VERSION 3.0 is an upgrade of the existing Monteburns code available through RSICC. The new version includes modern programming style, increased parallel computing, more accurate capture gamma calculations and an automated input generator. This capability was demonstrated through a small PWR core simulation.

  14. Texts in multiple versions: histories of editions

    NARCIS (Netherlands)

    L. Giuliani; H. Brinkman; G. Lernout; M. Mathijsen

    2006-01-01

    Texts in multiple versions constitute the core problem of textual scholarship. For texts from antiquity and the medieval period, the many versions may be the result of manuscript transmission, requiring editors and readers to discriminate between levels of authority in variant readings produced alon

  15. Japanese guideline for the oncology FDG-PET/CT data acquisition protocol: synopsis of Version 1.0

    National Research Council Canada - National Science Library

    Fukukita, Hiroyoshi; Senda, Michio; Terauchi, Takashi; Suzuki, Kazufumi; Daisaki, Hiromitsu; Matsumoto, Keiichi; Ikari, Yasuhiko; Hayashi, Masuo

    2010-01-01

    This synopsis outlines the Japanese guideline Version 1.0 for the data acquisition protocol of oncology FDG-PET/CT scans that was created by a joint task force of the Japanese Society of Nuclear Medicine Technology (JSNMT...

  16. The propagation effect of paper version and the iPad version for periodicals

    Directory of Open Access Journals (Sweden)

    Cong Zhang

    2015-04-01

    Full Text Available Purpose: Digital journal created a new development pattern. We use journal APP as an example to analyze how to migrate the journal content to Internet and other kind of media. Based on the case study of GQ and other fashion magazines, through text analysis, control experiments, in-depth interviews and other research methods, the authors analyzed the differences and connections between the iPad App and print edition of magazines, discussed the approaches towards operation of new media, offered the tendency of mobile device platform development for China’s periodical publications. Design/methodology/approach: control experiment. Findings: The authors give a stance that the print edition of periodical publication will being alive still, and conclude that journal APP and printed version can be mutually beneficial and achieve a win-win state. And we believe that the journal APP is good at advertising propagation, which will accelerate the development of journal APP in such the information age, and such kind of media can integrate many information with variety of media forms. Research limitations/implications: Because of the limitation of technology, the authors only have the experiment on fashion magazine, which might to some degree simplify the issue under discussion. Practical implications: According to the conclusion of a series of experiments, we can imply the future of the media, and give the suggestion of both paper version and ipad version of the journal. Social implications: Since people can not live without media and media has to develope with the help of public, we have to give the new way of both sunrise media and sunset media. Originality/value: Based on the case study of GQ and other fashion magazines, through text analysis, control experiments, in-depth interviews and other research methods, the authors analyzed the differences and connections between the iPad App and print edition of magazines, discussed the approaches towards

  17. The limits of mathematics third version

    CERN Document Server

    Chaitin, G J

    1994-01-01

    This is yet another version of the course notes in chao-dyn/9407003. Here we change the universal Turing machine that is used to measure program-size complexity so that the constants in our information-theoretic incompleteness theorems are further reduced. This is done by inventing a more complicated version of lisp in which the parentheses associating defined functions with their arguments can be omitted. This is the third and last version of my course notes. It is not clear to me which is to be preferred, so all three have been made available for comment.

  18. UNICOS Evolution: CPC Version 6

    CERN Document Server

    Blanco Vinuela, E; Bradu, B; Durand, Ph; Fernandez Adiego, B; Izquierdo Rosas, S; Merezhin, A; Ortola Vidal, J; Rochez, J; Willeman, D

    2011-01-01

    The UNICOS (UNified Industrial COntrol System) framework was created back in 1998. Since then a noticeable number of applications in different domains have used this framework. Furthermore UNICOS has been formalized and its supervision layer has been reused in other kinds of applications (e.g. monitoring or supervisory tasks) where a control layer is not necessarily UNICOS oriented. The process control package has been reformulated as the UNICOS CPC package (Continuous Process Control) and a reengineering process has been followed. The drive behind these noticeable changes was (1) being able to upgrade to the new more performing IT technologies in the automatic code generation, (2) being flexible enough to create new additional device types to cope with other needs (e.g. Vacuum or Cooling and Ventilation applications) without major impact on the framework or the PLC code baselines and (3) enhance the framework with new functionalities (e.g. recipes). This publication addresses the motivation, changes, new fun...

  19. The Moab Design for Digital Object Versioning

    Directory of Open Access Journals (Sweden)

    Richard Anderson

    2013-07-01

    Full Text Available The Stanford Digital Repository has adopted the "Moab" design for versioned archiving of digital objects--a locally developed approach that optimizes data transfer, storage, and replication while providing efficient single file retrieval or full object reconstruction for any version of an object. This paper includes a review of various versioning strategies including forward-delta, reverse-delta and content-addressable mechanisms, the pro's and cons of each, and highlights the relative advantages of the Moab design. In our approach, the fixity information of a file manifestation is used as its primary identifier and the filename is treated as metadata. Storage and retrieval of an object's files is faciliated by mapping between a virtual version inventory and the physical location via a file signature catalog.

  20. A kernel version of multivariate alteration detection

    DEFF Research Database (Denmark)

    Nielsen, Allan Aasbjerg; Vestergaard, Jacob Schack

    2013-01-01

    Based on the established methods kernel canonical correlation analysis and multivariate alteration detection we introduce a kernel version of multivariate alteration detection. A case study with SPOT HRV data shows that the kMAD variates focus on extreme change observations.......Based on the established methods kernel canonical correlation analysis and multivariate alteration detection we introduce a kernel version of multivariate alteration detection. A case study with SPOT HRV data shows that the kMAD variates focus on extreme change observations....

  1. Ecodesign Directive version 2.0

    DEFF Research Database (Denmark)

    This present report reports on the main findings of the project Ecodesign Directive version 2.0 - from Energy Efficiency to Resource Efficiency. The project is financed by the Danish Environmental Protection Agency and ran from December 2012 to June 2014.......This present report reports on the main findings of the project Ecodesign Directive version 2.0 - from Energy Efficiency to Resource Efficiency. The project is financed by the Danish Environmental Protection Agency and ran from December 2012 to June 2014....

  2. Cubical version of combinatorial differential forms

    DEFF Research Database (Denmark)

    Kock, Anders

    2010-01-01

    The theory of combinatorial differential forms is usually presented in simplicial terms. We present here a cubical version; it depends on the possibility of forming affine combinations of mutual neighbour points in a manifold, in the context of synthetic differential geometry.......The theory of combinatorial differential forms is usually presented in simplicial terms. We present here a cubical version; it depends on the possibility of forming affine combinations of mutual neighbour points in a manifold, in the context of synthetic differential geometry....

  3. HPSim, Version 1.0

    Energy Technology Data Exchange (ETDEWEB)

    2016-08-23

    HPSim is a GPU-accelerated online multi-particle beam dynamics simulation tool for ion linacs. It was originally developed for use on the Los Alamos 800-MeV proton linac. It is a “z-code” that contains typical linac beam transport elements. The linac RF-gap transformation utilizes transit-time-factors to calculate the beam acceleration therein. The space-charge effects are computed using the 2D SCHEFF (Space CHarge EFFect) algorithm, which calculates the radial and longitudinal space charge forces for cylindrically symmetric beam distributions. Other space- charge routines to be incorporated include the 3D PICNIC and a 3D Poisson solver. HPSim can simulate beam dynamics in drift tube linacs (DTLs) and coupled cavity linacs (CCLs). Elliptical superconducting cavity (SC) structures will also be incorporated into the code. The computational core of the code is written in C++ and accelerated using the NVIDIA CUDA technology. Users access the core code, which is wrapped in Python/C APIs, via Pythons scripts that enable ease-of-use and automation of the simulations. The overall linac description including the EPICS PV machine control parameters is kept in an SQLite database that also contains calibration and conversion factors required to transform the machine set points into model values used in the simulation.

  4. PCATool-ADULT-BRAZIL: a reduced version

    Directory of Open Access Journals (Sweden)

    Mônica Maria Celestina de Oliveira

    2013-09-01

    Full Text Available The reorganization of the Brazilian health system brings the need for on-going evaluation of the services offered to the population. The Primary Care Assessment Tool (PCATool-Brazil version for adult users, validated for the Brazilian context, adequately measures the presence and extent of attributes of primary health care (PHC services. A reduced version of this instrument is required to optimize the process of implementation and use of the results in strategic actions. This article aims to present a reduced version of the PCATool-Brazil for adult users and analyze its suitability. The instrument was applied to 2404 adult residents of areas covered by primary health care (PHC units in Porto Alegre, Rio Grande do Sul state. By the two-parameter logistic model of Item Response Theory (ML-2, 23 items that presented discrimination classified as moderate to strong, contemplating the seven attributes of PHC, were selected. As a measure of consistency, the results obtained with this version were compared with the complete version, revealing consistent PHC scores. These findings indicate that the PCATool-Brazil reduced version for adult users presents adequate validity and reliability, and it can be adopted as a rapid assessment tool to evaluate PHC in Brazilian services, permitting decision making guided by evidence in the development of actions to improve the quality of care offered to the population.

  5. TAE+ 5.1 - TRANSPORTABLE APPLICATIONS ENVIRONMENT PLUS, VERSION 5.1 (SUN3 VERSION)

    Science.gov (United States)

    TAE SUPPORT OFFICE

    1994-01-01

    50 cartridge in VAX BACKUP format), 2) DEC VAXstations running ULTRIX 4.1 or later (TK50 cartridge in UNIX tar format), 3) DEC RISC workstations running ULTRIX 4.1 or later (TK50 cartridge in UNIX tar format), 4) HP9000 Series 300/400 computers running HP-UX 8.0 (.25 inch HP-preformatted tape cartridge in UNIX tar format), 5) HP9000 Series 700 computers running HP-UX 8.05 (HP 4mm DDS DAT tape cartridge in UNIX tar format), 6) Sun3 series computers running SunOS 4.1.1 (.25 inch tape cartridge in UNIX tar format), 7) Sun4 (SPARC) series computers running SunOS 4.1.1 (.25 inch tape cartridge in UNIX tar format), and 8) SGI Indigo computers running IRIX 4.0.1 and IRIX/Motif 1.0.1 (.25 inch IRIS tape cartridge in UNIX tar format). An optional Motif Object Code License is available for either Sun version. TAE is a trademark of the National Aeronautics and Space Administration. X Window System is a trademark of the Massachusetts Institute of Technology. Motif is a trademark of the Open Software Foundation. DEC, VAX, VMS, TK50 and ULTRIX are trademarks of Digital Equipment Corporation. HP9000 and HP-UX are trademarks of Hewlett-Packard Co. Sun3, Sun4, SunOS, and SPARC are trademarks of Sun Microsystems, Inc. SGI and IRIS are registered trademarks of Silicon Graphics, Inc.

  6. TAE+ 5.1 - TRANSPORTABLE APPLICATIONS ENVIRONMENT PLUS, VERSION 5.1 (DEC VAX ULTRIX VERSION)

    Science.gov (United States)

    TAE SUPPORT OFFICE

    1994-01-01

    50 cartridge in VAX BACKUP format), 2) DEC VAXstations running ULTRIX 4.1 or later (TK50 cartridge in UNIX tar format), 3) DEC RISC workstations running ULTRIX 4.1 or later (TK50 cartridge in UNIX tar format), 4) HP9000 Series 300/400 computers running HP-UX 8.0 (.25 inch HP-preformatted tape cartridge in UNIX tar format), 5) HP9000 Series 700 computers running HP-UX 8.05 (HP 4mm DDS DAT tape cartridge in UNIX tar format), 6) Sun3 series computers running SunOS 4.1.1 (.25 inch tape cartridge in UNIX tar format), 7) Sun4 (SPARC) series computers running SunOS 4.1.1 (.25 inch tape cartridge in UNIX tar format), and 8) SGI Indigo computers running IRIX 4.0.1 and IRIX/Motif 1.0.1 (.25 inch IRIS tape cartridge in UNIX tar format). An optional Motif Object Code License is available for either Sun version. TAE is a trademark of the National Aeronautics and Space Administration. X Window System is a trademark of the Massachusetts Institute of Technology. Motif is a trademark of the Open Software Foundation. DEC, VAX, VMS, TK50 and ULTRIX are trademarks of Digital Equipment Corporation. HP9000 and HP-UX are trademarks of Hewlett-Packard Co. Sun3, Sun4, SunOS, and SPARC are trademarks of Sun Microsystems, Inc. SGI and IRIS are registered trademarks of Silicon Graphics, Inc.

  7. Comparing Two Versions of Professional Development for Teachers Using Formative Assessment in Networked Mathematics Classrooms

    Science.gov (United States)

    Yin, Yue; Olson, Judith; Olson, Melfried; Solvin, Hannah; Brandon, Paul R.

    2015-01-01

    This study compared two versions of professional development (PD) designed for teachers using formative assessment (FA) in mathematics classrooms that were networked with Texas Instruments Navigator (NAV) technology. Thirty-two middle school mathematics teachers were randomly assigned to one of the two groups: FA-then-NAV group and FA-and-NAV…

  8. A new version of code Java for 3D simulation of the CCA model

    Science.gov (United States)

    Zhang, Kebo; Xiong, Hailing; Li, Chao

    2016-07-01

    In this paper we present a new version of the program of CCA model. In order to benefit from the advantages involved in the latest technologies, we migrated the running environment from JDK1.6 to JDK1.7. And the old program was optimized into a new framework, so promoted extendibility.

  9. Online Information Searching Strategy Inventory (OISSI): A Quick Version and a Complete Version

    Science.gov (United States)

    Tsai, Meng-Jung

    2009-01-01

    This study developed an instrument to evaluate student online information searching strategies based on a framework comprising three domains and seven aspects. Two versions of the Online Information Searching Strategies Inventory (OISSI), including both quick and complete versions, were finally established and exhibited good validities and…

  10. Spanish version of Colquitt's Organizational Justice Scale.

    Science.gov (United States)

    Díaz-Gracia, Liliana; Barbaranelli, Claudio; Moreno-Jiménez, Bernardo

    2014-01-01

    Organizational justice (OJ) is an important predictor of different work attitudes and behaviors. Colquitt's Organizational Justice Scale (COJS) was designed to assess employees' perceptions of fairness. This scale has four dimensions: distributive, procedural, informational, and interpersonal justice. The objective of this study is to validate it in a Spanish sample. The scale was administered to 460 Spanish employees from the service sector. 40.4% were men and 59.6% women. The Confirmatory Factor Analysis (CFA) supported the four dimensions structure for Spanish version of COJS. This model showed a better fit to data that the others models tested. Cronbach's alpha obtained for subscales ranged between .88 and .95. Correlations of the Spanish version of COJS with measures of incivility and job satisfaction were statistically significant and had a moderate to high magnitude, indicating a reasonable degree of construct validity. The Spanish version of COJS has adequate psychometric properties and may be of value in assessing OJ in Spanish setting.

  11. A kernel version of spatial factor analysis

    DEFF Research Database (Denmark)

    Nielsen, Allan Aasbjerg

    2009-01-01

    . Schölkopf et al. introduce kernel PCA. Shawe-Taylor and Cristianini is an excellent reference for kernel methods in general. Bishop and Press et al. describe kernel methods among many other subjects. Nielsen and Canty use kernel PCA to detect change in univariate airborne digital camera images. The kernel...... version of PCA handles nonlinearities by implicitly transforming data into high (even infinite) dimensional feature space via the kernel function and then performing a linear analysis in that space. In this paper we shall apply kernel versions of PCA, maximum autocorrelation factor (MAF) analysis...

  12. Self-consciousness Scale: a Brazilian version.

    Science.gov (United States)

    Teixeira, M A; Gomes, W B

    1995-10-01

    The aim of this study was to examine the applicability of a Brazilian version of the Self-consciousness Scale to university students. Factorial structure, subscale intercorrelations, and normative data obtained with 182 subjects are reported. These results suggest that the proposed model of self-consciousness is applicable in the Brazilian culture, although some significant sex differences were found for two of the scales. Reliability tests and the factorial validity of the scale showed that this version still needs refinement to be used as a reliable research tool.

  13. Concepts of incremental updating and versioning

    CSIR Research Space (South Africa)

    Cooper, Antony K

    2004-07-01

    Full Text Available . BACKGROUND TO THE PROBLEM OF INCREMENTAL UPDATING AND VERSIONING As well as a number of Commissions, the International Cartographic Association (ICA) had one Working Group, on Incremental Updating and Versioning, and this presentation describes some... of the work undertaken recently by the Working Group (WG). The WG was voted for a Commission by the General Assembly held at the 21st ICC in Durban, South Africa. The basic problem being addressed by the Commission is that a user compiles their data base...

  14. A merge model with endogenous technological change

    Energy Technology Data Exchange (ETDEWEB)

    Kypreos, S.; Bahn, O.

    2002-03-01

    A new version of the MERGE model, called MERGE-ETL, has been developed to consider endogenous technological change in the energy system. The basic formulation of MERGE-ETL as well as some first results are reported here. (author)

  15. EDITORIAL MODERN TECHNOLOGY IN PERIPHERAL HEALTH ...

    African Journals Online (AJOL)

    hi-tech

    2004-06-01

    Jun 1, 2004 ... improved versions of technology developed long ago, such as the ... health care system should it be applied; and at what cost? These questions .... Equipment maintenance starts with training users in correct operation, basic ...

  16. Using Versions of Literary Texts to Improve Comprehension.

    Science.gov (United States)

    Samuel, Moses

    1995-01-01

    Discusses the use of the original text of Shakespeare's "Macbeth," a simplified version, and a comic-book version of the play in a college-level English-as-a-Second-Language (ESL) course. The results indicate that multiple versions of a text can help offset the shortcomings of using only the original text or a simplified version. (three…

  17. ICRAF Species Switchboard. Version 1.2

    DEFF Research Database (Denmark)

    Kindt, R.; Ordonez, J.; Smith, E.;

    2015-01-01

    The current version of the Agroforestry Species Switchboard documents the presence of a total of 26,135 plant species (33,813 species including synonyms) across 19 web-based databases. When available, hyperlinks to information on the selected species in particular databases are provided. In total...

  18. Version Control in Project-Based Learning

    Science.gov (United States)

    Milentijevic, Ivan; Ciric, Vladimir; Vojinovic, Oliver

    2008-01-01

    This paper deals with the development of a generalized model for version control systems application as a support in a range of project-based learning methods. The model is given as UML sequence diagram and described in detail. The proposed model encompasses a wide range of different project-based learning approaches by assigning a supervisory…

  19. UGV Control Interoperability Profile (IOP), Version 0

    Science.gov (United States)

    2011-12-21

    sections provide best practice information (articles, papers , website, etc.) 5.1.1 OCU Physical Attributes 5.1.1.1 Standards Number Document...information (articles, papers , website, etc.). In future versions of this document, additional tables will be developed, containing standards and guidelines...Mounted Display ICD Interface Control Document IEC International Electrotechnical Commission IMS Intelligent Munitions Systems IOP Interoperability

  20. ICRAF Species Switchboard. Version 1.2

    DEFF Research Database (Denmark)

    Kindt, R.; Ordonez, J.; Smith, E.

    2015-01-01

    The current version of the Agroforestry Species Switchboard documents the presence of a total of 26,135 plant species (33,813 species including synonyms) across 19 web-based databases. When available, hyperlinks to information on the selected species in particular databases are provided. In total...

  1. Department of Defense Technical Architecture Framework for Information Management. Volume 1-8: Overview. Version 3.0.

    Science.gov (United States)

    1996-04-30

    Portability Guide (XPG), an open environment based on standards. X/Open also brands products. Volume 4 DoD Standards-Based Architecture Version 3.0...Open Portability Guide (XPG), an open environment based on standards. X/Open also brands products. Volume 4 DoD Standards-Based Architecture Version...Interface Style Guide 30 April 1996 Nes, F. 1986. "Space, Color, and Typography on Visual Display Terminals." Behavior and Information Technology 5(2

  2. PR-EDB: Power Reactor Embrittlement Database - Version 3

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Jy-An John [ORNL; Subramani, Ranjit [ORNL

    2008-03-01

    The aging and degradation of light-water reactor pressure vessels is of particular concern because of their relevance to plant integrity and the magnitude of the expected irradiation embrittlement. The radiation embrittlement of reactor pressure vessel materials depends on many factors, such as neutron fluence, flux, and energy spectrum, irradiation temperature, and preirradiation material history and chemical compositions. These factors must be considered to reliably predict pressure vessel embrittlement and to ensure the safe operation of the reactor. Large amounts of data from surveillance capsules are needed to develop a generally applicable damage prediction model that can be used for industry standards and regulatory guides. Furthermore, the investigations of regulatory issues such as vessel integrity over plant life, vessel failure, and sufficiency of current codes, Standard Review Plans (SRPs), and Guides for license renewal can be greatly expedited by the use of a well-designed computerized database. The Power Reactor Embrittlement Database (PR-EDB) is such a comprehensive collection of data for U.S. designed commercial nuclear reactors. The current version of the PR-EDB lists the test results of 104 heat-affected-zone (HAZ) materials, 115 weld materials, and 141 base materials, including 103 plates, 35 forgings, and 3 correlation monitor materials that were irradiated in 321 capsules from 106 commercial power reactors. The data files are given in dBASE format and can be accessed with any personal computer using the Windows operating system. "User-friendly" utility programs have been written to investigate radiation embrittlement using this database. Utility programs allow the user to retrieve, select and manipulate specific data, display data to the screen or printer, and fit and plot Charpy impact data. The PR-EDB Version 3.0 upgrades Version 2.0. The package was developed based on the Microsoft .NET framework technology and uses Microsoft Access for

  3. GHCN Version 3 Land Temperature and Version 2 Land Precipitation Dataset

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains gridded mean temperature anomalies from the Global Historical Climatology Network-Monthly (GHCN-M) version 3.3.0 temperature data set. The...

  4. AF-GEOSPACE Version 2.1

    Science.gov (United States)

    Hilmer, R. V.; Ginet, G. P.; Hall, T.; Holeman, E.; Madden, D.; Tautz, M.; Roth, C.

    2004-05-01

    AF-GEOSpace is a graphics-intensive software program with space environment models and applications developed and distributed by the Space Weather Center of Excellence at AFRL. A review of current (Version 2.0) and planned (Version 2.1) AF-GEOSpace capabilities will be given. A wide range of physical domains is represented enabling the software to address such things as solar disturbance propagation, radiation belt configuration, and ionospheric auroral particle precipitation and scintillation. The software is currently being used to aid with the design, operation, and simulation of a wide variety of communications, navigation, and surveillance systems. Building on the success of previous releases, AF-GEOSpace has become a platform for the rapid prototyping of automated operational and simulation space weather visualization products and helps with a variety of tasks, including: orbit specification for radiation hazard avoidance; satellite design assessment and post-event anomaly analysis; solar disturbance effects forecasting; frequency and antenna management for radar and HF communications; determination of link outage regions for active ionospheric conditions; scientific model validation and comparison, physics research, and education. Version 2.0 provided a simplified graphical user interface, improved science and application modules, and significantly enhanced graphical performance. Common input data archive sets, application modules, and 1-D, 2-D, and 3-D visualization tools are provided to all models. Dynamic capabilities permit multiple environments to be generated at user-specified time intervals while animation tools enable displays such as satellite orbits and environment data together as a function of time. Building on the existing Version 2.0 software architecture, AF-GEOSpace Version 2.1 is currently under development and will include a host of new modules to provide, for example, geosynchronous charged particle fluxes, neutral atmosphere densities

  5. Major Upgrades to the AIRS Version-6 Ozone Profile Methodology

    Science.gov (United States)

    Susskind, Joel; Blaisdell, John; Iredell, Lena

    2015-01-01

    This research is a continuation of part of what was shown at the last AIRS Science Team Meeting in the talk Improved Water Vapor and Ozone Profiles in SRT AIRS Version-6.X and the AIRS February 11, 2015 NetMeeting Further improvements in water vapor and ozone profiles compared to Version-6.AIRS Version-6 was finalized in late 2012 and is now operational. Version-6 contained many significant improvements in retrieval methodology compared to Version-5. However, Version-6 retrieval methodology used for the water vapor profile q(p) and ozone profile O3(p) retrievals is basically unchanged from Version-5, or even from Version-4. Subsequent research has made significant improvements in both water vapor and O3 profiles compared to Version-6. This talk will concentrate on O3 profile retrievals. Improvements in water vapor profile retrievals are given in a separate presentation.

  6. A version management model of PDM system and its realization

    Institute of Scientific and Technical Information of China (English)

    ZHONG Shi-sheng; LI Tao

    2008-01-01

    Based on the key function of version management in PDM system, this paper discusses the function and the realization of version management and the transitions of version states with a workflow. A directed acy-clic graph is used to describe a version model. Three storage modes of the directed acyclic graph version model in the database, the bumping block and the PDM working memory are presented and the conversion principle of these three modes is given. The study indicates that building a dynamic product structure configuration model based on versions is the key to resolve the problem. Thus a version model of single product object is built. Then the version management model in product structure configuration is built and the apphcation of version manage-ment of PDM syste' is presented as a case.

  7. Information Technology and Security

    OpenAIRE

    Denning, Dorothy E.

    2003-01-01

    in Grave New World: Global Dangers in the 21st Century (Michael Brown ed.), Georgetown Press, 2003. (.pdf of prepublication version) This paper examines key trends and developments in information technology, and the implications of those developments on stability and security. Focus is on cyber threats to computer networks, including information theft and sabotage, and acts that disrupt or deny services. Seven trend areas are examined: ubiquity, mobility, hacking tools, perform...

  8. RADS Version 4: An Efficient Way to Analyse the Multi-Mission Altimeter Database

    Science.gov (United States)

    Scharroo, Remko; Leuliette, Eric; Naeije, Marc; Martin-Puig, Cristina; Pires, Nelson

    2016-08-01

    The Radar Altimeter Database System (RADS) has grown to become a mature altimeter database. Over the last 18 years it is continuously being developed, first at Delft University of Technology, now also at the National Oceanic and Atmospheric Administration (NOAA) and the European Organisation for the Exploitation of Meteorological Satellites (EUMETSAT).RADS now serves as a fundamental Climate Data Record for sea level. Because of the multiple users involved in vetting the data and the regular updates to the database, RADS is one of the most accurate and complete databases of satellite altimeter data around.RADS version 4 is a major change from the previous version. While the database is compatible with both software versions, the new software provides new tools, allows easier expansion, and has a better and more standardised interface.

  9. Indonesian consumers’ perception of modernized and original version of traditional food

    DEFF Research Database (Denmark)

    Fibri, Dwi Larasatie Nur; Frøst, Michael Bom

    Technological development provides modernized versions of traditional foods. However, not all developments in food production are in line with consumer acceptability, and this may be particularly important for traditional food. The objective of this study was to determine Indonesian consumers......’ perception of a selection of traditional food products in original and modernized versions. An internet based survey (n=310) was distributed to validate the perception of Indonesian food products based on description only. Seventeen products (tempe usar, tempe ragi, hygienic tempe, homemade sambal, sambal...... besek, boxed gudeg and canned gudeg) were chosen to further study perception with actual products. Overall, this study provided an overview of Indonesian consumer perception of some traditional Indonesian food products in different versions....

  10. Validation of the Italian version of the Non-Communicating Children's Pain Checklist-Postoperative Version.

    Science.gov (United States)

    Zanchi, C; Massaro, M; Ferrara, G; Montico, M; D'Osualdo, F; Rutigliano, R; Taddio, A; Vecchi Brumatti, L; Cozzi, G; Barbi, E

    2017-08-22

    This study evaluated the validity and reliability of the Italian version of the Non-Communicating Children's Pain Checklist-Postoperative version (I-NCCPC-PV). The original NCCPC-PV version was translated into Italian following the guidelines for "the translation, adaptation, and validation of instruments or scales for cross-cultural healthcare research". We tested the Italian NCCPC-PV version (I-NCCPC-PV) in 40 children (3-18 years of age) with severe to profound Intellectual Disability and no verbal communication. Each child's behavior was observed by a parent or caregiver and by an external observer in a quiet situation and a painful one. They independently assessed the child's level of pain using the translated Italian version of the NCCPCPV (I-NCCPC-PV). The results from 80 assessments showed that children's behavioral signs differed significantly between painful and calm situations (p Italian version of the NCCPC-PV (I-NCCPC-PV) can be used for pain assessment in children with Intellectual Disability who lack verbal communication.

  11. Kernel versions of some orthogonal transformations

    DEFF Research Database (Denmark)

    Nielsen, Allan Aasbjerg

    Kernel versions of orthogonal transformations such as principal components are based on a dual formulation also termed Q-mode analysis in which the data enter into the analysis via inner products in the Gram matrix only. In the kernel version the inner products of the original data are replaced...... by inner products between nonlinear mappings into higher dimensional feature space. Via kernel substitution also known as the kernel trick these inner products between the mappings are in turn replaced by a kernel function and all quantities needed in the analysis are expressed in terms of this kernel...... function. This means that we need not know the nonlinear mappings explicitly. Kernel principal component analysis (PCA) and kernel minimum noise fraction (MNF) analyses handle nonlinearities by implicitly transforming data into high (even infinite) dimensional feature space via the kernel function...

  12. A kernel version of spatial factor analysis

    DEFF Research Database (Denmark)

    Nielsen, Allan Aasbjerg

    2009-01-01

    of PCA and related techniques. An interesting dilemma in reduction of dimensionality of data is the desire to obtain simplicity for better understanding, visualization and interpretation of the data on the one hand, and the desire to retain sufficient detail for adequate representation on the other hand......Based on work by Pearson in 1901, Hotelling in 1933 introduced principal component analysis (PCA). PCA is often used for general feature generation and linear orthogonalization or compression by dimensionality reduction of correlated multivariate data, see Jolliffe for a comprehensive description...... version of PCA handles nonlinearities by implicitly transforming data into high (even infinite) dimensional feature space via the kernel function and then performing a linear analysis in that space. In this paper we shall apply kernel versions of PCA, maximum autocorrelation factor (MAF) analysis...

  13. New Version of the COCO Program

    Directory of Open Access Journals (Sweden)

    F. Fencl

    1994-09-01

    Full Text Available The new version of the COCO program enables the analysis of linear circuits in symbolical, symbolic numerical or in semi-symbolical form. Simple synthesis problems can also be solved with the aid of this program. Several examples illustrate the use of the program for circuit analysis and synthesis. Modern network elements (trans-impedance operational amplifier, current conveyors are built in the program.

  14. The limits of mathematics tutorial version

    CERN Document Server

    Chaitin, G J

    1995-01-01

    The latest in a series of reports presenting the information-theoretic incompleteness theorems of algorithmic information theory via algorithms written in specially designed versions of LISP. Previously in this LISP code only one-character identifiers were allowed, and arithmetic had to be programmed out. Now identifiers can be many characters long, and arithmetic with arbitrarily large unsigned decimal integers is built in. This and many other changes in the software have made this material much easier to understand and to use.

  15. EPICS Version 4 - Implementing Complex Data Types

    Energy Technology Data Exchange (ETDEWEB)

    Marty Kraimer,; John dalesio

    2012-11-27

    Through phase 1 and phase 2 SBIR grants, s fully functional I/O Controller and communication protocol for version 4 of EPICS is completed. This new software architecture provides a flexible and extendible architecture. Version 4 is implemented fully in Java. The performance metrics look promising. The final portion of phase 2 is to optimize the communication mechanisms. Subsequent work on different aspects of this are required to provide a viable solutions in various areas. Version 3 of EPICS is able to provide a platform for implementing channel based control, because the channel and attributes for time stamping, alarm, display and control were narrow, well defined, and complete. To extend EPICS functionality beyond this, it is necessary to define attributes needed for archive data, array, image data, and directory services. The proper handling of several array types enables the development of middle layer servers such as orbit and bump control in accelerators. Phase 1 should produce a well defined, reviewed, and agreed upon definition of the metadata required for these services. A Phase 2 grant would provide tools that implemented archiving, general array, imaging, and directory applications.

  16. Merged Sounding VAP Version 2.0

    Energy Technology Data Exchange (ETDEWEB)

    Troyan, D.; Jensen, M.; Turner, D.; Miloshevich, L.

    2010-03-15

    The Merged Sounding Value-Added Product (VAP) has been in the ARM and ASR pipeline since 2001. Output data streams have been added to the Evaluation Products section of the ARM website for the past five years. Currently, there are data for all of the ACRF fixed sites and all deployments of the Mobile Facility. Fifty-three years of Merged Sounding data is available as an evaluation product. The process of moving all to the ARM Data Archive has been started and will be completed shortly. A second version of the Merged Sounding VAP was developed to address several concerns: (1) Vaisala radiosondes have inherent problems obtaining an accurate measurement of relative humidity, (2) the profile can be extended from 20 km to 60 km above ground level based upon the height achieved by ECMWF profiles, and (3) ECMWF temperatures require adjustments at high altitude (between 1mb and 100 mb). Solutions to these issues have been incorporated in the new version of this VAP. Along with producing that second version of Merged Sounding, a secondary data stream - Sonde Adjust - was created. This VAP incorporates any humidity corrections to the Vaisala RS-80, RS-90, and RS-92 radiosondes. The algorithms used to perform these corrections are documented by Wang et. al. (2002), Turner et. al. (2003), and Miloshevich et. al. (2004, 2009).

  17. Validation of the Persian Version of the Problematic Internet Use Questionnaire (PIUQ.

    Directory of Open Access Journals (Sweden)

    Hadi Ranjbar

    2014-12-01

    Full Text Available The most commonly used instrument for the research and treatment of excessive internet use is Young's Internet Addiction Test (IAT. While the IAT has been translated to several languages (including Persian and has demonstrated good psychometric properties across several independent studies, there is still a room for alternative assessment instruments. This study reports a validation of the Persian version of the Problematic Internet Use Questionnaire (PIUQ.A sample (n = 296 from Kerman, Iran was administered the translated Persian version of the PIUQ as well as the Persian version of the University of California, Los Angeles (UCLA Loneliness scale, Satisfaction With Life scale, and questions related to use of technology and the internet.Analyses using confirmatory and exploratory factor analyses demonstrated that the Persian version of the PIUQ had good internal reliability and concurrent validity (with loneliness and satisfaction with life, but they also had an alternative factor structure that did not support the original factor structure.The Persian version of the PIUQ produced adequate psychometric properties (internal reliability and concurrent validity, but care should be taken in the interpretation of the factor structure.

  18. Reliability and validity of the Japanese version of the Resilience Scale and its short version

    Directory of Open Access Journals (Sweden)

    Kondo Maki

    2010-11-01

    Full Text Available Abstract Background The clinical relevance of resilience has received considerable attention in recent years. The aim of this study is to demonstrate the reliability and validity of the Japanese version of the Resilience Scale (RS and short version of the RS (RS-14. Findings The original English version of RS was translated to Japanese and the Japanese version was confirmed by back-translation. Participants were 430 nursing and university psychology students. The RS, Center for Epidemiologic Studies Depression Scale (CES-D, Rosenberg Self-Esteem Scale (RSES, Social Support Questionnaire (SSQ, Perceived Stress Scale (PSS, and Sheehan Disability Scale (SDS were administered. Internal consistency, convergent validity and factor loadings were assessed at initial assessment. Test-retest reliability was assessed using data collected from 107 students at 3 months after baseline. Mean score on the RS was 111.19. Cronbach's alpha coefficients for the RS and RS-14 were 0.90 and 0.88, respectively. The test-retest correlation coefficients for the RS and RS-14 were 0.83 and 0.84, respectively. Both the RS and RS-14 were negatively correlated with the CES-D and SDS, and positively correlated with the RSES, SSQ and PSS (all p Conclusions This study demonstrates that the Japanese version of RS has psychometric properties with high degrees of internal consistency, high test-retest reliability, and relatively low concurrent validity. RS-14 was equivalent to the RS in internal consistency, test-retest reliability, and concurrent validity. Low scores on the RS, a positive correlation between the RS and perceived stress, and a relatively low correlation between the RS and depressive symptoms in this study suggest that validity of the Japanese version of the RS might be relatively low compared with the original English version.

  19. Interactive tag cloud visualization of software version control repositories

    CSIR Research Space (South Africa)

    Greene, GJ

    2015-09-01

    Full Text Available Visualization of Software: Version Control Repositories Gillian J. Greene and Bernd Fischer Abstract: Version control repositories contain a wealth of implicit information that can be used to answer many questions about a project’s development process...

  20. Global Historical Climatology Network - Monthly (GHCN-M), Version 2

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Please note, the temperature portion of this dataset has been superseded by a newer version. Users should not use this version except in rare cases (e.g., when...

  1. National Land Cover Database 2001 Version 2: 1985-2006

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The National Land Cover Database 2001 Version 2 (NLCD 2001 Version 2) is being compiled across all 50 states and Puerto Rico as a cooperative mapping effort of the...

  2. National Land Cover Database 2001 Version 2: 1985-2006

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The National Land Cover Database 2001 Version 2 (NLCD 2001 Version 2) is being compiled across all 50 states and Puerto Rico as a cooperative mapping effort of the...

  3. Progress Towards AIRS Science Team Version-7 at SRT

    Science.gov (United States)

    Susskind, Joel; Blaisdell, John; Iredell, Lena; Kouvaris, Louis

    2016-01-01

    The AIRS Science Team Version-6 retrieval algorithm is currently producing level-3 Climate Data Records (CDRs) from AIRS that have been proven useful to scientists in understanding climate processes. CDRs are gridded level-3 products which include all cases passing AIRS Climate QC. SRT has made significant further improvements to AIRS Version-6. At the last Science Team Meeting, we described results using SRT AIRS Version-6.22. SRT Version-6.22 is now an official build at JPL called 6.2.4. Version-6.22 results are significantly improved compared to Version-6, especially with regard to water vapor and ozone profiles. We have adapted AIRS Version-6.22 to run with CrIS/ATMS, at the Sounder SIPS which processed CrIS/ATMS data for August 2014. JPL AIRS Version-6.22 uses the Version-6 AIRS tuning coefficients. AIRS Version-6.22 has at least two limitations which must be improved before finalization of Version-7: Version-6.22 total O3 has spurious high values in the presence of Saharan dust over the ocean; and Version-6.22 retrieved upper stratospheric temperatures are very poor in polar winter. SRT Version-6.28 addresses the first concern. John Blaisdell ran the analog of AIRS Version-6.28 in his own sandbox at JPL for the 14th and 15th of every month in 2014 and all of July and October for 2014. AIRS Version-6.28a is hot off the presses and addresses the second concern.

  4. Virtual reality software and technology.

    Science.gov (United States)

    Lin, Ming C; Otaduy, Miguel A; Boulic, Ronan

    2008-01-01

    This special issue contains an introductory survey on 3D user interfaces by leading VR authorities and significantly expanded versions of the four best short papers from the proceedings of the 14th ACM Symposium on Virtual Reality Software and Technology (VRST 07).

  5. Food Science and Technology Abstracts.

    Science.gov (United States)

    Cohen, Elinor; Federman, Joan

    1979-01-01

    Introduces the reader to the Food Science and Technology Abstracts, a data file that covers worldwide literature on human food commodities and aspects of food processing. Topics include scope, subject index, thesaurus, searching online, and abstracts; tables provide a comparison of ORBIT and DIALOG versions of the file. (JD)

  6. 16 CFR 460.7 - Which test version to use.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Which test version to use. 460.7 Section 460.7 Commercial Practices FEDERAL TRADE COMMISSION TRADE REGULATION RULES LABELING AND ADVERTISING OF HOME INSULATION § 460.7 Which test version to use. Use the version of the ASTM test method that was...

  7. Fuzzy Versions of Epistemic and Deontic Logic

    Science.gov (United States)

    Gounder, Ramasamy S.; Esterline, Albert C.

    1998-01-01

    Epistemic and deontic logics are modal logics, respectively, of knowledge and of the normative concepts of obligation, permission, and prohibition. Epistemic logic is useful in formalizing systems of communicating processes and knowledge and belief in AI (Artificial Intelligence). Deontic logic is useful in computer science wherever we must distinguish between actual and ideal behavior, as in fault tolerance and database integrity constraints. We here discuss fuzzy versions of these logics. In the crisp versions, various axioms correspond to various properties of the structures used in defining the semantics of the logics. Thus, any axiomatic theory will be characterized not only by its axioms but also by the set of properties holding of the corresponding semantic structures. Fuzzy logic does not proceed with axiomatic systems, but fuzzy versions of the semantic properties exist and can be shown to correspond to some of the axioms for the crisp systems in special ways that support dependency networks among assertions in a modal domain. This in turn allows one to implement truth maintenance systems. For the technical development of epistemic logic, and for that of deontic logic. To our knowledge, we are the first to address fuzzy epistemic and fuzzy deontic logic explicitly and to consider the different systems and semantic properties available. We give the syntax and semantics of epistemic logic and discuss the correspondence between axioms of epistemic logic and properties of semantic structures. The same topics are covered for deontic logic. Fuzzy epistemic and fuzzy deontic logic discusses the relationship between axioms and semantic properties for these logics. Our results can be exploited in truth maintenance systems.

  8. Data Identifiers, Versioning, and Micro-citation

    Science.gov (United States)

    Parsons, M. A.; Duerr, R. E.

    2012-12-01

    Data citation, especially using Digital Object Identifiers (DOIs), is an increasingly accepted scientific practice. For example, the AGU Council asserts that data "publications" should "be credited and cited like the products of any other scientific activity," and Thomson Reuters has recently announced a data citation index built from DOIs assigned to data sets. Correspondingly, formal guidelines for how to cite a data set (using DOIs or similar identifiers/locators) have recently emerged, notably those from the international DataCite consortium, the UK Digital Curation Centre, and the US Federation of Earth Science Information Partners. These different data citation guidelines are largely congruent. They agree on the basic practice and elements of data citation, especially for relatively static, whole data collections. There is less agreement on some of the more subtle nuances of data citation. They define different methods for handling different data set versions, especially for the very dynamic, growing data sets that are common in Earth Sciences. They also differ in how people should cite specific, arbitrarily large elements, "passages," or subsets of a larger data collection, i.e., the precise data records actually used in a study. This detailed "micro-citation", and careful reference to exact versions of data are essential to ensure scientific reproducibility. Identifiers such as DOIs are necessary but not sufficient for the precise, detailed, references necessary. Careful practice must be coupled with the use of curated identifiers. In this paper we review the pros and cons of different approaches to versioning and micro-citation. We suggest a workable solution for most existing Earth science data and suggest a more rigorous path forward for the future.

  9. Brazilian version of the Berg balance scale

    Directory of Open Access Journals (Sweden)

    Miyamoto S.T.

    2004-01-01

    Full Text Available The purpose of the present study was to translate and adapt the Berg balance scale, an instrument for functional balance assessment, to Brazilian-Portuguese and to determine the reliability of scores obtained with the Brazilian adaptation. Two persons proficient in English independently translated the original scale into Brazilian-Portuguese and a consensus version was generated. Two translators performed a back translation. Discrepancies were discussed and solved by a panel. Forty patients older than 65 years and 40 therapists were included in the cultural adaptation phase. If more than 15% of therapists or patients reported difficulty in understanding an item, that item was reformulated and reapplied. The final Brazilian version was then tested on 36 elderly patients (over age 65. The average age was 72 years. Reliability of the measure was assessed twice by one physical therapist (1-week interval between assessments and once by one independent physical therapist. Descriptive analysis was used to characterize the patients. The intraclass correlation coefficient (ICC and Pearson's correlation coefficient were computed to assess intra- and interobserver reliability. Six questions were modified during the translation stage and cultural adaptation phase. The ICC for intra- and interobserver reliability was 0.99 (P < 0.001 and 0.98 (P < 0.001, respectively. The Pearson correlation coefficient for intra- and interobserver reliability was 0.98 (P < 0.001 and 0.97 (P < 0.001, respectively. We conclude that the Brazilian version of the Berg balance scale is a reliable instrument to be used in balance assessment of elderly Brazilian patients.

  10. UQTk version 2.0 user manual.

    Energy Technology Data Exchange (ETDEWEB)

    Debusschere, Bert J.; Sargsyan, Khachik; Safta, Cosmin

    2013-10-01

    The UQ Toolkit (UQTk) is a collection of libraries and tools for the quanti cation of uncer- tainty in numerical model predictions. Version 2.0 o ers intrusive and non-intrusive methods for propagating input uncertainties through computational models, tools for sensitivity anal- ysis, methods for sparse surrogate construction, and Bayesian inference tools for inferring parameters from experimental data. This manual discusses the download and installation process for UQTk, provides pointers to the UQ methods used in the toolkit, and describes some of the examples provided with the toolkit.

  11. A GENERALIZED VERSION OF PLAY FAIR CIPHER

    Directory of Open Access Journals (Sweden)

    Jitendra Choudhary

    2013-06-01

    Full Text Available In this paper, we have generalized and modified the play fair cipher. We have introduced confusion and diffusion. The cryptanalysis carried out in this analysis has shown that the proposed play fair cipher is a strong one. The role of cryptography in today’s world is increasing day by day. Information is flowing from are place to another on the network. One most common cryptography technique is substitution cipher. Play fair is most common substitution cipher. In this paper, we present a generalized version of play fair ciphers. Encryption/decryption is a very popular task. We also explain the fundamentals of sequential cryptography.

  12. Python pocket reference, version 2.4

    CERN Document Server

    Lutz, Mark

    2005-01-01

    Python is optimized for quality, productivity, portability, and integration. Hundreds of thousands of Python developers around the world rely on Python for general-purpose tasks, Internet scripting, systems programming, user interfaces, and product customization. Available on all major computing platforms, including commercial versions of Unix, Linux, Windows, and Mac OS X, Python is portable, powerful and remarkable easy to use. With its convenient, quick-reference format, Python Pocket Reference, 3rd Edition is the perfect on-the-job reference. More importantly, it's now been refreshed

  13. A Functional Version of the ARCH Model

    CERN Document Server

    Hormann, Siegfried; Reeder, Ron

    2011-01-01

    Improvements in data acquisition and processing techniques have lead to an almost continuous flow of information for financial data. High resolution tick data are available and can be quite conveniently described by a continuous time process. It is therefore natural to ask for possible extensions of financial time series models to a functional setup. In this paper we propose a functional version of the popular ARCH model. We will establish conditions for the existence of a strictly stationary solution, derive weak dependence and moment conditions, show consistency of the estimators and perform a small empirical study demonstrating how our model matches with real data.

  14. An Introduction to Version Control Using GitHub Desktop

    Directory of Open Access Journals (Sweden)

    Daniel van Strien

    2016-06-01

    Full Text Available In this lesson you will be introduced to the basics of version control, understand why it is useful and implement basic version control for a plain text document using GitHub Desktop. By the end of this lesson you should understand: * what version control is and why it can be useful * the differences between Git and GitHub * how to implement version control using ‘GitHub Desktop,’ a Graphical User Interface for GitHub * be aware of other resources that will help you implement version control in your academic writing

  15. Two Mathematically Equivalent Versions of Maxwell's Equations

    Science.gov (United States)

    Gill, Tepper L.; Zachary, Woodford W.

    2011-01-01

    This paper is a review of the canonical proper-time approach to relativistic mechanics and classical electrodynamics. The purpose is to provide a physically complete classical background for a new approach to relativistic quantum theory. Here, we first show that there are two versions of Maxwell's equations. The new version fixes the clock of the field source for all inertial observers. However now, the (natural definition of the effective) speed of light is no longer an invariant for all observers, but depends on the motion of the source. This approach allows us to account for radiation reaction without the Lorentz-Dirac equation, self-energy (divergence), advanced potentials or any assumptions about the structure of the source. The theory provides a new invariance group which, in general, is a nonlinear and nonlocal representation of the Lorentz group. This approach also provides a natural (and unique) definition of simultaneity for all observers. The corresponding particle theory is independent of particle number, noninvariant under time reversal (arrow of time), compatible with quantum mechanics and has a corresponding positive definite canonical Hamiltonian associated with the clock of the source. We also provide a brief review of our work on the foundational aspects of the corresponding relativistic quantum theory. Here, we show that the standard square-root and Dirac equations are actually two distinct spin- 1/2 particle equations.

  16. Brazilian version of the Berg balance scale.

    Science.gov (United States)

    Miyamoto, S T; Lombardi Junior, I; Berg, K O; Ramos, L R; Natour, J

    2004-09-01

    The purpose of the present study was to translate and adapt the Berg balance scale, an instrument for functional balance assessment, to Brazilian-Portuguese and to determine the reliability of scores obtained with the Brazilian adaptation. Two persons proficient in English independently translated the original scale into Brazilian-Portuguese and a consensus version was generated. Two translators performed a back translation. Discrepancies were discussed and solved by a panel. Forty patients older than 65 years and 40 therapists were included in the cultural adaptation phase. If more than 15% of therapists or patients reported difficulty in understanding an item, that item was reformulated and reapplied. The final Brazilian version was then tested on 36 elderly patients (over age 65). The average age was 72 years. Reliability of the measure was assessed twice by one physical therapist (1-week interval between assessments) and once by one independent physical therapist. Descriptive analysis was used to characterize the patients. The intraclass correlation coefficient (ICC) and Pearson's correlation coefficient were computed to assess intra- and interobserver reliability. Six questions were modified during the translation stage and cultural adaptation phase. The ICC for intra- and interobserver reliability was 0.99 (P Berg balance scale is a reliable instrument to be used in balance assessment of elderly Brazilian patients.

  17. TOUGH2-GRS version 1. User manual

    Energy Technology Data Exchange (ETDEWEB)

    Navarro, Martin; Eckel, Jens

    2016-07-15

    TOUGH2 is a code for the simulation of multi-phase flow processes in porous media that has been developed by the Lawrence Berkeley National Laboratory, California, USA. Since 1991, GRS has been using the code for process analyses and safety assessments for deep geological repositories and has extended the code by several processes that are relevant for repository systems. The TOUGH2 source code that has been developed further by GRS is referred to as TOUGH2-GRS. The present report presents code version 1.1.g, which was developed in project UM13 A 03400 sponsored by the German Federal Ministry for the Environment, Nature Conservation, Building and Nuclear Safety (BMUB).

  18. FLEXAN (version 2.0) user's guide

    Science.gov (United States)

    Stallcup, Scott S.

    1989-01-01

    The FLEXAN (Flexible Animation) computer program, Version 2.0 is described. FLEXAN animates 3-D wireframe structural dynamics on the Evans and Sutherland PS300 graphics workstation with a VAX/VMS host computer. Animation options include: unconstrained vibrational modes, mode time histories (multiple modes), delta time histories (modal and/or nonmodal deformations), color time histories (elements of the structure change colors through time), and rotational time histories (parts of the structure rotate through time). Concurrent color, mode, delta, and rotation, time history animations are supported. FLEXAN does not model structures or calculate the dynamics of structures; it only animates data from other computer programs. FLEXAN was developed to aid in the study of the structural dynamics of spacecraft.

  19. Forsmark - site descriptive model version 0

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-10-01

    During 2002, the Swedish Nuclear Fuel and Waste Management Company (SKB) is starting investigations at two potential sites for a deep repository in the Precambrian basement of the Fennoscandian Shield. The present report concerns one of those sites, Forsmark, which lies in the municipality of Oesthammar, on the east coast of Sweden, about 150 kilometres north of Stockholm. The site description should present all collected data and interpreted parameters of importance for the overall scientific understanding of the site, for the technical design and environmental impact assessment of the deep repository, and for the assessment of long-term safety. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. The site descriptive models are devised and stepwise updated as the site investigations proceed. The point of departure for this process is the regional site descriptive model, version 0, which is the subject of the present report. Version 0 is developed out of the information available at the start of the site investigation. This information, with the exception of data from tunnels and drill holes at the sites of the Forsmark nuclear reactors and the underground low-middle active radioactive waste storage facility, SFR, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. For this reason, the Forsmark site descriptive model, version 0, as detailed in the present report, has been developed at a regional scale. It covers a rectangular area, 15 km in a southwest-northeast and 11 km in a northwest-southeast direction, around the

  20. An approximate version of Sidorenko's conjecture

    CERN Document Server

    Conlon, David; Sudakov, Benny

    2010-01-01

    A beautiful conjecture of Erd\\H{o}s-Simonovits and Sidorenko states that if H is a bipartite graph, then the random graph with edge density p has in expectation asymptotically the minimum number of copies of H over all graphs of the same order and edge density. This conjecture also has an equivalent analytic form and has connections to a broad range of topics, such as matrix theory, Markov chains, graph limits, and quasirandomness. Here we prove the conjecture if H has a vertex complete to the other part, and deduce an approximate version of the conjecture for all H. Furthermore, for a large class of bipartite graphs, we prove a stronger stability result which answers a question of Chung, Graham, and Wilson on quasirandomness for these graphs.

  1. The Classical Version of Stokes' Theorem Revisited

    DEFF Research Database (Denmark)

    Markvorsen, Steen

    2005-01-01

    Using only fairly simple and elementary considerations - essentially from first year undergraduate mathematics - we prove that the classical Stokes' theorem for any given surface and vector field in $\\mathbb{R}^{3}$ follows from an application of Gauss' divergence theorem to a suitable modification...... of the vector field in a tubular shell around the given surface. The intuitive appeal of the divergence theorem is thus applied to bootstrap a corresponding intuition for Stokes' theorem. The two stated classical theorems are (like the fundamental theorem of calculus) nothing but shadows of the general version...... to above. Our proof that Stokes' theorem follows from Gauss' divergence theorem goes via a well known and often used exercise, which simply relates the concepts of divergence and curl on the local differential level. The rest of the paper uses only integration in $1$, $2$, and $3$ variables together...

  2. The classical version of Stokes' Theorem revisited

    DEFF Research Database (Denmark)

    Markvorsen, Steen

    2008-01-01

    Using only fairly simple and elementary considerations - essentially from first year undergraduate mathematics - we show how the classical Stokes' theorem for any given surface and vector field in $\\mathbb{R}^{3}$ follows from an application of Gauss' divergence theorem to a suitable modification...... of the vector field in a tubular shell around the given surface. The two stated classical theorems are (like the fundamental theorem of calculus) nothing but shadows of the general version of Stokes' theorem for differential forms on manifolds. The main points in the present paper, however, is firstly...... exercise, which simply relates the concepts of divergence and curl on the local differential level. The rest of the paper uses only integration in $1$, $2$, and $3$ variables together with a 'fattening' technique for surfaces and the inverse function theorem....

  3. The Turkish version of Maternal Attachment Inventory

    Directory of Open Access Journals (Sweden)

    Oya Kavlak

    2009-01-01

    Full Text Available Objective: The research has been designed as methodological with purpose of the validity and the reliability of the Turkish language version of Maternal Attachment Inventory on mothers within one and four months postpartum. Method: This study was carried out with mothers registered at 19 Health Clinics and three Maternal-Child Health and Family Planning Clinics in which connected to Bornova Health Presidency in Izmir. The sample of research has been composed three clinics in which determined with the purposive sampling technique. First stage, the research was studied on 165 mothers when their babies were approximately 30-40 days old in these registered clinics.At the second stage of research has been interviewed again with 78 mothers when their babies were approximately 90-105 days old.Results: It is determined that experts consensuses about content of items as a result of analysis (Kendall’s W=0.274, p=0.001

  4. Children's Sleep Habits Questionnaire - Infant Version.

    Science.gov (United States)

    Dias, Cláudia Castro; Figueiredo, Bárbara; Pinto, Tiago Miguel

    2017-08-23

    This study proposed a version of the Children's Sleep Habits Questionnaire for infants under 12 months (CSHQ-I). The sample was comprised of 299 infants, aged between 2 weeks and 12 months. Exploratory factor analysis revealed four subscales: Bedtime Resistance, Sleep Anxiety, Positive Sleep Habits, and Daytime Sleepiness. The CSHQ-I total scale presented good test-retest reliability and internal consistency. The CSHQ-I also showed good concurrent validity, with significant associations found between the CSHQ-I total scale and subscales and a measure of infant sleep-wake behaviors. The present study suggested the CSHQ-I as a reliable instrument to assess sleep problems in infants during the first year of life. Copyright © 2017 Sociedade Brasileira de Pediatria. Published by Elsevier Editora Ltda. All rights reserved.

  5. DISFRAC Version 2.0 Users Guide

    Energy Technology Data Exchange (ETDEWEB)

    Cochran, Kristine B [ORNL; Erickson, Marjorie A [ORNL; Williams, Paul T [ORNL; Klasky, Hilda B [ORNL; Bass, Bennett Richard [ORNL

    2013-01-01

    DISFRAC is the implementation of a theoretical, multi-scale model for the prediction of fracture toughness in the ductile-to-brittle transition temperature (DBTT) region of ferritic steels. Empirically-derived models of the DBTT region cannot legitimately be extrapolated beyond the range of existing fracture toughness data. DISFRAC requires only tensile properties and microstructural information as input, and thus allows for a wider range of application than empirical, toughness data dependent models. DISFRAC is also a framework for investigating the roles of various microstructural and macroscopic effects on fracture behavior, including carbide particle sizes, grain sizes, strain rates, and material condition. DISFRAC s novel approach is to assess the interaction effects of macroscopic conditions (geometry, loading conditions) with variable microstructural features on cleavage crack initiation and propagation. The model addresses all stages of the fracture process, from microcrack initiation within a carbide particle, to propagation of that crack through grains and across grain boundaries, finally to catastrophic failure of the material. The DISFRAC procedure repeatedly performs a deterministic analysis of microcrack initiation and propagation within a macroscopic crack plastic zone to calculate a critical fracture toughness value for each microstructural geometry set. The current version of DISFRAC, version 2.0, is a research code for developing and testing models related to cleavage fracture and transition toughness. The various models and computations have evolved significantly over the course of development and are expected to continue to evolve as testing and data collection continue. This document serves as a guide to the usage and theoretical foundations of DISFRAC v2.0. Feedback is welcomed and encouraged.

  6. Zgoubi user`s guide. Version 4

    Energy Technology Data Exchange (ETDEWEB)

    Meot, F. [Fermi National Accelerator Lab., Batavia, IL (United States). Dept. of Physics; Valero, S. [CEA, Gif-sur-Yvette (France)

    1997-10-15

    The computer code Zgoubi calculates trajectories of charged particles in magnetic and electric fields. At the origin specially adapted to the definition and adjustment of beam lines and magnetic spectrometers, it has so-evolved that it allows the study of systems including complex sequences of optical elements such as dipoles, quadrupoles, arbitrary multipoles and other magnetic or electric devices, and is able as well to handle periodic structures. Compared to other codes, it presents several peculiarities: (1) a numerical method for integrating the Lorentz equation, based on Taylor series, which optimizes computing time and provides high accuracy and strong symplecticity, (2) spin tracking, using the same numerical method as for the Lorentz equation, (3) calculation of the synchrotron radiation electric field and spectra in arbitrary magnetic fields, from the ray-tracing outcomes, (4) the possibility of using a mesh, which allows ray-tracing from simulated or measured (1-D, 2-D or 3-D) field maps, (5) Monte Carlo procedures: unlimited number of trajectories, in-flight decay, etc. (6) built-in fitting procedure, (7) multiturn tracking in circular accelerators including many features proper to machine parameter calculation and survey, and also the simulation of time-varying power supplies. The initial version of the Code, dedicated to the ray-tracing in magnetic fields, was developed by D. Garreta and J.C. Faivre at CEN-Saclay in the early 1970`s. It was perfected for the purpose of studying the four spectrometers (SPES I, II, III, IV) at the Laboratoire National Saturne (CEA-Saclay, France), and SPEG at Ganil (Caen, France). It is now in use in several national and foreign laboratories. This manual is intended only to describe the details of the most recent version of Zogoubi, which is far from being a {open_quotes}finished product{close_quotes}.

  7. ADAMS/WT advanced development - version 1.4 and beyond

    Energy Technology Data Exchange (ETDEWEB)

    Elliott, A.S.; Depauw, T.R. [Mechanical Dynamics, Inc., Mesa, AZ (United States)

    1996-12-31

    ADAMS/WT is an wind-turbine-specific shell for the general-purpose mechanical system simulation package ADAMS5. It was developed under the guidance of the National Renewable Energy Laboratory to give engineers and analysts in the wind turbine community access to the analytical power of ADAMS, without having to become expert in its particular technology. The 1.4 version of ADAMS/WT is the most recent upgrade to the package, incorporating the most up-to-date version of the AeroDyn aerodynamic forcing subroutines from the University of Utah. It is also the first version to be made available on the Windows/NT platform. In version 1.4, ADAMS/WT has been significantly improved throughout and runs much faster. Automatic generation of standardized output has been added. The documentation has been extensively augmented with more detailed descriptions, more figures and more examples. ADAMS/WT remains the most powerful analytical tool available for horizontal-axis wind turbine development. 10 figs.

  8. Blocking Underhand Attacks by Hidden Coalitions (Extended Version)

    CERN Document Server

    Cristani, Matteo; Viganò, Luca

    2010-01-01

    Similar to what happens between humans in the real world, in open multi-agent systems distributed over the Internet, such as online social networks or wiki technologies, agents often form coalitions by agreeing to act as a whole in order to achieve certain common goals. However, agent coalitions are not always a desirable feature of a system, as malicious or corrupt agents may collaborate in order to subvert or attack the system. In this paper, we consider the problem of hidden coalitions, whose existence and the purposes they aim to achieve are not known to the system, and which carry out so-called underhand attacks. We give a first approach to hidden coalitions by introducing a deterministic method that blocks the actions of potentially dangerous agents, i.e. possibly belonging to such coalitions. We also give a non-deterministic version of this method that blocks the smallest set of potentially dangerous agents. We calculate the computational cost of our two blocking methods, and prove their soundness and ...

  9. CERN HUMAN RESSOURCES 1999 FRENCH VERSION NOW AVAIABLE

    CERN Multimedia

    Division du Personnel

    1999-01-01

    A report on CERN Human Resources is published once every two years. The version of the 1999 report is now available in French and in English: in your divisional secretariat for paper copieson the Web: http://www.cern.ch/HRreportIn its foreword, the Director-General addresses some key issues:'Many (…) key personnel are now steadily approaching retirement. (…) More efficient working methods and new technology can absorb not all the natural depletion. New blood is vital, and about a hundred new people are taken on each year'About the RSL programme, he says:'… More than 30 additional posts have been opened by this voluntary scheme. This programme displays the excellent mutual understanding that has been carefully built up between CERN management and staff. This harmonious atmosphere bodes well for continued success.'The Human Resources 1999 report gives information on a lot of subjects:general information on CERN's aim and the organisation of its operations,major changes in recent years...

  10. Technology Optimism in a Socio-Economic Perspective

    DEFF Research Database (Denmark)

    Røpke, Inge

    1996-01-01

    the need for changes in fundamental mechanisms, power structures and basic ideas as preconditions for influencing the direction of technological change. The paper deals with the state interventionist version of technology optimism, where it is emphasized that active industrial and technology policies...

  11. Simpevarp - site descriptive model version 0

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-11-01

    During 2002, SKB is starting detailed investigations at two potential sites for a deep repository in the Precambrian rocks of the Fennoscandian Shield. The present report concerns one of those sites, Simpevarp, which lies in the municipality of Oskarshamn, on the southeast coast of Sweden, about 250 kilometres south of Stockholm. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. SKB maintains two main databases at the present time, a site characterisation database called SICADA and a geographic information system called SKB GIS. The site descriptive model will be developed and presented with the aid of the SKB GIS capabilities, and with SKBs Rock Visualisation System (RVS), which is also linked to SICADA. The version 0 model forms an important framework for subsequent model versions, which are developed successively, as new information from the site investigations becomes available. Version 0 is developed out of the information available at the start of the site investigation. In the case of Simpevarp, this is essentially the information which was compiled for the Oskarshamn feasibility study, which led to the choice of that area as a favourable object for further study, together with information collected since its completion. This information, with the exception of the extensive data base from the nearby Aespoe Hard Rock Laboratory, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. Against this background, the present report consists of the following components: an overview of the present content of the databases

  12. Technological Research and Development Plan 1999-2003

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    The present document summarises the ENRESA Technological Research and Development Plan (1999-2003) for the radioactive waste management. The full version of this Plan is included in the ENRESA Technical Publications series corresponding to the year 1999. (Author)

  13. Verification of RESRAD-RDD. (Version 2.01)

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, Jing-Jy [Argonne National Lab. (ANL), Argonne, IL (United States); Flood, Paul E. [Argonne National Lab. (ANL), Argonne, IL (United States); LePoire, David [Argonne National Lab. (ANL), Argonne, IL (United States); Kamboj, Sunita [Argonne National Lab. (ANL), Argonne, IL (United States); Yu, Charley [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-09-01

    In this report, the results generated by RESRAD-RDD version 2.01 are compared with those produced by RESRAD-RDD version 1.7 for different scenarios with different sets of input parameters. RESRAD-RDD version 1.7 is spreadsheet-driven, performing calculations with Microsoft Excel spreadsheets. RESRAD-RDD version 2.01 revamped version 1.7 by using command-driven programs designed with Visual Basic.NET to direct calculations with data saved in Microsoft Access database, and re-facing the graphical user interface (GUI) to provide more flexibility and choices in guideline derivation. Because version 1.7 and version 2.01 perform the same calculations, the comparison of their results serves as verification of both versions. The verification covered calculation results for 11 radionuclides included in both versions: Am-241, Cf-252, Cm-244, Co-60, Cs-137, Ir-192, Po-210, Pu-238, Pu-239, Ra-226, and Sr-90. At first, all nuclidespecific data used in both versions were compared to ensure that they are identical. Then generic operational guidelines and measurement-based radiation doses or stay times associated with a specific operational guideline group were calculated with both versions using different sets of input parameters, and the results obtained with the same set of input parameters were compared. A total of 12 sets of input parameters were used for the verification, and the comparison was performed for each operational guideline group, from A to G, sequentially. The verification shows that RESRAD-RDD version 1.7 and RESRAD-RDD version 2.01 generate almost identical results; the slight differences could be attributed to differences in numerical precision with Microsoft Excel and Visual Basic.NET. RESRAD-RDD version 2.01 allows the selection of different units for use in reporting calculation results. The results of SI units were obtained and compared with the base results (in traditional units) used for comparison with version 1.7. The comparison shows that RESRAD

  14. An Introduction to Version Control Using GitHub Desktop

    OpenAIRE

    Daniel van Strien

    2016-01-01

    In this lesson you will be introduced to the basics of version control, understand why it is useful and implement basic version control for a plain text document using GitHub Desktop. By the end of this lesson you should understand: * what version control is and why it can be useful * the differences between Git and GitHub * how to implement version control using ‘GitHub Desktop,’ a Graphical User Interface for GitHub * be aware of other resources that will help you imple...

  15. Forsmark - site descriptive model version 0

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-10-01

    During 2002, the Swedish Nuclear Fuel and Waste Management Company (SKB) is starting investigations at two potential sites for a deep repository in the Precambrian basement of the Fennoscandian Shield. The present report concerns one of those sites, Forsmark, which lies in the municipality of Oesthammar, on the east coast of Sweden, about 150 kilometres north of Stockholm. The site description should present all collected data and interpreted parameters of importance for the overall scientific understanding of the site, for the technical design and environmental impact assessment of the deep repository, and for the assessment of long-term safety. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. The site descriptive models are devised and stepwise updated as the site investigations proceed. The point of departure for this process is the regional site descriptive model, version 0, which is the subject of the present report. Version 0 is developed out of the information available at the start of the site investigation. This information, with the exception of data from tunnels and drill holes at the sites of the Forsmark nuclear reactors and the underground low-middle active radioactive waste storage facility, SFR, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. For this reason, the Forsmark site descriptive model, version 0, as detailed in the present report, has been developed at a regional scale. It covers a rectangular area, 15 km in a southwest-northeast and 11 km in a northwest-southeast direction, around the

  16. dfnWorks, Version 2.0

    Energy Technology Data Exchange (ETDEWEB)

    2017-01-19

    DFNWorks is a suite of software for generating and solving flow and transport physics on a Discrete Fracture Network (DFN). The suite is composed of three components: DFNGen: Stochastic fracture generation, mesh generation, model setup DFNFlow: Flow solution using PFLOTRAN or FEHM control volume formulation solver DFNTrans: Particle tracking transport DFNGen Algorithm Description: This is a workflow that uses C++ software version for fracture generation, Python scripts written by the authors and the LaGriT software to generate computational mesh. DFNFlow The solution of flow in porous media is accomplished by coupling DFNGen output with the existing software packages FEHM and PFLOTRAN. The DFNWorks workflow involves modules and scripts that translate DFNGen output to formats compatible with FEHM and PFLOTRAN input. FEHM LA-CC-2012-083 PFLOTRAN LA-CC-09-047 LaGriT LA-CC-07-38 DFNTrans Stand-alone particle tracking algorithm that takes FEHM/PFLOTRAN flow solution as output and computes velocity field and advects particles.

  17. Version 1 of the Hubble Source Catalog

    CERN Document Server

    Whitmore, Bradley C; Budavari, Tamas; Casertano, Stefano; Downes, Ronald A; Donaldson, Thomas; Fall, S Michael; Lubow, Stephen H; Quick, Lee; Strolger, Louis-Gregory; Wallace, Geoff; White, Richard L

    2016-01-01

    The Hubble Source Catalog is designed to help optimize science from the Hubble Space Telescope by combining the tens of thousands of visit-based source lists in the Hubble Legacy Archive into a single master catalog. Version 1 of the Hubble Source Catalog includes WFPC2, ACS/WFC, WFC3/UVIS, and WFC3/IR photometric data generated using SExtractor software to produce the individual source lists. The catalog includes roughly 80 million detections of 30 million objects involving 112 different detector/filter combinations, and about 160 thousand HST exposures. Source lists from Data Release 8 of the Hubble Legacy Archive are matched using an algorithm developed by Budavari & Lubow (2012). The mean photometric accuracy for the catalog as a whole is better than 0.10 mag, with relative accuracy as good as 0.02 mag in certain circumstances (e.g., bright isolated stars). The relative astrometric residuals are typically within 10 mas, with a value for the mode (i.e., most common value) of 2.3 mas. The absolute astro...

  18. The Conformal Version of Black Hole Thermodynamics

    CERN Document Server

    Wu, S Q

    2004-01-01

    The conformal thermodynamics of rotating charged black holes in general relativity and string theory is proposed by considering the first laws of thermodynamics for a pair of systems made up of the two horizons of a Kerr-Newman or Kerr-Sen black hole. These two systems are constructed by only demanding their ``horizon areas'' to be the sum and difference of that of the outer and inner horizons of their prototype. The thermodynamics present here is a ``conformal version'' of black hole thermodynamics, since it is closely related to the near-horizon conformal symmetry of black holes. The concept of non-quasinormal modes recently proposed by D. Birmingham and S. Carlip [7] is compatible with this ``conformal thermodynamics'', rather than the usual ``horizon thermodynamics''. In addition, we show that this conformal thermodynamics resembles to the thermodynamics of effective string or D-brane models, since the two newly-constructed systems bear a striking resemblance to the right- and left-movers in string theory...

  19. Curiosity rover LEGO® version could land soon

    Science.gov (United States)

    Showstack, Randy

    2012-09-01

    Now that NASA's Curiosity rover has landed on Mars, a smaller LEGO® plastic brick construction version could be landing in toy stores. Less than 2 weeks after Curiosity set down on 5 August, a LEGO® set concept model designed by a mechanical and aerospace engineer who worked on the real rover garnered its 10,000th supporter on the Web site of CUUSOO, a Japanese partner of the LEGO® group. That milestone triggered a company review that began in September 2012 to test the model's “playability, safety, and ft with the LEGO® brand,” according to a congratulatory statement from the company to designer Stephen Pakbaz. Pakbaz told Eos that he has been an avid LEGO® and space exploration fan for most of his life. “For me, creating a LEGO® model of Curiosity using my firsthand knowledge of the rover was inevitable. What I enjoyed most was being able to faithfully replicate and subsequently demonstrate the rocker-bogie suspension system to friends, family, and coworkers,” he noted, referring to the suspension system that allows the rover to climb over obstacles while keeping its wheels on the ground. Pakbaz, who is currently with Orbital Sciences Corporation, was involved with aspects of the rover while working at the Jet Propulsion Laboratory from 2007 to 2011 as a mechanical engineer.

  20. SPAM- SPECTRAL ANALYSIS MANAGER (DEC VAX/VMS VERSION)

    Science.gov (United States)

    Solomon, J. E.

    1994-01-01

    machine environments. There is a DEC VAX/VMS version with a central memory requirement of approximately 242K of 8 bit bytes and a machine independent UNIX 4.2 version. The display device currently supported is the Raster Technologies display processor. Other 512 x 512 resolution color display devices, such as De Anza, may be added with minor code modifications. This program was developed in 1986.

  1. TAE+ 5.1 - TRANSPORTABLE APPLICATIONS ENVIRONMENT PLUS, VERSION 5.1 (SUN3 VERSION WITH MOTIF)

    Science.gov (United States)

    TAE SUPPORT OFFICE

    1994-01-01

    50 cartridge in VAX BACKUP format), 2) DEC VAXstations running ULTRIX 4.1 or later (TK50 cartridge in UNIX tar format), 3) DEC RISC workstations running ULTRIX 4.1 or later (TK50 cartridge in UNIX tar format), 4) HP9000 Series 300/400 computers running HP-UX 8.0 (.25 inch HP-preformatted tape cartridge in UNIX tar format), 5) HP9000 Series 700 computers running HP-UX 8.05 (HP 4mm DDS DAT tape cartridge in UNIX tar format), 6) Sun3 series computers running SunOS 4.1.1 (.25 inch tape cartridge in UNIX tar format), 7) Sun4 (SPARC) series computers running SunOS 4.1.1 (.25 inch tape cartridge in UNIX tar format), and 8) SGI Indigo computers running IRIX 4.0.1 and IRIX/Motif 1.0.1 (.25 inch IRIS tape cartridge in UNIX tar format). An optional Motif Object Code License is available for either Sun version. TAE is a trademark of the National Aeronautics and Space Administration. X Window System is a trademark of the Massachusetts Institute of Technology. Motif is a trademark of the Open Software Foundation. DEC, VAX, VMS, TK50 and ULTRIX are trademarks of Digital Equipment Corporation. HP9000 and HP-UX are trademarks of Hewlett-Packard Co. Sun3, Sun4, SunOS, and SPARC are trademarks of Sun Microsystems, Inc. SGI and IRIS are registered trademarks of Silicon Graphics, Inc.

  2. Performance of Roche CAP/CTM HIV-1 qualitative test version 2.0 using dried blood spots for early infant diagnosis.

    Science.gov (United States)

    Gueye, Sokhna Bousso; Diop-Ndiaye, Halimatou; Diallo, Mamadou Malick; Ly, Omar; Sow-Ndoye, Aissatou; Diagne-Gueye, Ndèye Diabou; Kébé-Fall, Khady; Diop, Fatou; Gaye-Diallo, Aïssatou; Belec, Laurent; Mboup, Souleymane; Touré-Kane, Coumba

    2016-03-01

    In the context of early infant diagnosis (EID) decentralization in sub-Saharan Africa, dried blood spot (DBS) is now widely used for HIV proviral DNA detection in resource-limited settings. A new version of CAP/CTM (version 2) has been introduced, recently by Roche Diagnosis as a new real-time PCR assay to replace previous technologies on qualitative detection of HIV-1 DNA using whole blood and DBS samples. The objective of this study was to evaluate CAP/CTM version 2 compared to CAP/CTM version 1 and Amplicor on DBS. A total of 261 DBS were collected from children aged 4 weeks to 17 months born from HIV-seropositive mothers and tested by the three techniques. CAP/CTM version 2 showed 100% of agreement with Amplicor including 74 positive results and 187 negative results. CAP/CTM version 2 versus CAP/CTM version 1 as well as CAP/CTM version 1 versus Amplicor showed two discordant results giving a sensitivity of 98.6%, specificity of 99.5%, positive predictive value of 98.6% and negative predictive value of 99.5%. The concordance was 99.12% (95% of confidence interval) giving a Kappa coefficient of 0.97 (pHIV-1 EID.

  3. Meson Properties in a renormalizable version of the NJL model

    CERN Document Server

    Mota, A L; Hiller, B; Walliser, H; Mota, Andre L.; Hiller, Brigitte; Walliser, Hans

    1999-01-01

    In the present paper we implement a non-trivial and renormalizable extension of the NJL model. We discuss the advantages and shortcomings of this extended model compared to a usual effective Pauli-Villars regularized version. We show that both versions become equivalent in the case of a large cutoff. Various relevant mesonic observables are calculated and compared.

  4. Changes of ocular version with aging in normal Korean population.

    Science.gov (United States)

    Kang, Nam-Yeo

    2009-08-01

    The purpose of this study is to estimate normative values of maximum versions in healthy Koreans and investigate age-associated changes in eye movement, using lateral and vertical version light-reflex (LVR) test. Two hundred forty normal healthy subjects whose corrected visual acuity was better than 20/50 in both eyes, from 4 to 79 yr old (30 subjects in each decade) were studied. Maximum sustained values of dextroversion, levoversion, supraversion, and infraversion in each eye were measured using LVR test. Changes of versions according to age were analyzed. Mean normal value of dextroversion, levoversion, supraversion, and infraversion in normal Koreans was 7.7 mm, 41.6 degrees, 33.9 degrees, and 7.7 mm respectively. Contrary to values of Caucasians, levoversion (adductive movement) was more excessive and infraversion (depression) was smaller in Koreans. All versions were decreased with aging (Paging compared with other versions (Page than levoversion (Paging but the ranges of ocular movements in Koreans were different with Caucasians as version least affected and most affected by age was infraversion and levoversion in Koreans. The study standardized normal maximal versions and aging changes of versions in Koreans.

  5. Development of the Gerotranscendence Scale Type 2: Japanese Version

    Science.gov (United States)

    Hoshino, Kazumi; Zarit, Steven H.; Nakayama, Makoto

    2012-01-01

    This study developed the Japanese version of the Gerotranscendence Scale Type 2 (the GST2) and examined reliability and validity of the scale. In Japan, 525 community-dwelling older adults (Male = 260, Female = 265) answered a questionnaire. An exploratory factor analysis of the Japanese version of the GST2 revealed the same three-factor structure…

  6. Validation of a Portuguese Version of the Children's Hope Scale

    Science.gov (United States)

    Marques, Susana C.; Pais-Ribeiro, J. L.; Lopez, Shane J.

    2009-01-01

    The article describes the development of the Portuguese version of the Children's Hope Scale and the examination of its psychometric properties. A sample of 367 Portuguese students completed the Portuguese-language versions of the Children's Hope Scale (CHS; Snyder et al., 1997), Students' Life Satisfaction Scale (SLSS; Huebner, 1991), Global…

  7. The Gaia Framework: Version Support In Web Based Open Hypermedia

    DEFF Research Database (Denmark)

    Kejser, Thomas; Grønbæk, Kaj

    2003-01-01

    The GAIA framework prototype, described herein, explores the possibilities and problems that arise when combining versioning and open hypermedia paradigms. It will be argued that it - by adding versioning as a separate service in the hypermedia architecture - is possible to build consistent versi...

  8. Evaluation of Psychometric Properties of the Malay Version ...

    African Journals Online (AJOL)

    The 10-item version of Perceived Stress Scale (PSS-10) is ... [1-6]. There is a need to investigate the psychometric properties of the Malay version of ... 2015, IP: 41.135.175.131] || Click here to download free Android application for this journal ...

  9. GEM Building Taxonomy (Version 2.0)

    Science.gov (United States)

    Brzev, S.; Scawthorn, C.; Charleson, A.W.; Allen, L.; Greene, M.; Jaiswal, Kishor; Silva, V.

    2013-01-01

    This report documents the development and applications of the Building Taxonomy for the Global Earthquake Model (GEM). The purpose of the GEM Building Taxonomy is to describe and classify buildings in a uniform manner as a key step towards assessing their seismic risk, Criteria for development of the GEM Building Taxonomy were that the Taxonomy be relevant to seismic performance of different construction types; be comprehensive yet simple; be collapsible; adhere to principles that are familiar to the range of users; and ultimately be extensible to non-buildings and other hazards. The taxonomy was developed in conjunction with other GEM researchers and builds on the knowledge base from other taxonomies, including the EERI and IAEE World Housing Encyclopedia, PAGER-STR, and HAZUS. The taxonomy is organized as a series of expandable tables, which contain information pertaining to various building attributes. Each attribute describes a specific characteristic of an individual building or a class of buildings that could potentially affect their seismic performance. The following 13 attributes have been included in the GEM Building Taxonomy Version 2.0 (v2.0): 1.) direction, 2.)material of the lateral load-resisting system, 3.) lateral load-resisting system, 4.) height, 5.) date of construction of retrofit, 6.) occupancy, 7.) building position within a block, 8.) shape of the building plan, 9.) structural irregularity, 10.) exterior walls, 11.) roof, 12.) floor, 13.) foundation system. The report illustrates the pratical use of the GEM Building Taxonomy by discussing example case studies, in which the building-specific characteristics are mapped directly using GEM taxonomic attributes and the corresponding taxonomic string is constructed for that building, with "/" slash marks separating attributes. For example, for the building shown to the right, the GEM Taxonomy string is: DX1/MUR+CLBRS+MOCL2/LWAL3/

  10. GENII Version 2 Software Design Document

    Energy Technology Data Exchange (ETDEWEB)

    Napier, Bruce A.; Strenge, Dennis L.; Ramsdell, James V.; Eslinger, Paul W.; Fosmire, Christian J.

    2004-03-08

    appropriate risk factors to the effective dose equivalent or organ dose. In addition, Version 2 uses cancer risk factors from Federal Guidance Report 13 to estimate risk to specific organs or tissues.

  11. The Warburg effect version 2.0

    Science.gov (United States)

    Menendez, Javier A.; Joven, Jorge; Cufí, Sílvia; Corominas-Faja, Bruna; Oliveras-Ferraros, Cristina; Cuyàs, Elisabet; Martin-Castillo, Begoña; López-Bonet, Eugeni; Alarcón, Tomás; Vazquez-Martin, Alejandro

    2013-01-01

    When fighting cancer, knowledge on metabolism has always been important. Today, it matters more than ever. The restricted cataloging of cancer genomes is quite unlikely to achieve the task of curing cancer, unless it is integrated into metabolic networks that respond to and influence the constantly evolving cancer stem cell (CSC) cellular states. Once the genomic era of carcinogenesis had pushed the 1920s Otto Warburg’s metabolic cancer hypothesis into obscurity for decades, the most recent studies begin to support a new developing paradigm, in which the molecular logic behind the conversion of non-CSCs into CSCs can be better understood in terms of the “metabolic facilitators” and “metabolic impediments” that operate as proximate openings and roadblocks, respectively, for the transcriptional events and signal transduction programs that ultimately orchestrate the intrinsic and/or microenvironmental paths to CSC cellular states. Here we propose that a profound understanding of how human carcinomas install a proper “Warburg effect version 2.0” allowing them to “run” the CSCs’ “software” programs should guide a new era of metabolo-genomic-personalized cancer medicine. By viewing metabolic reprogramming of CSCs as an essential characteristic that allows dynamic, multidimensional and evolving cancer populations to compete successfully for their expansion on the organism, we now argue that CSCs bioenergetics might be another cancer hallmark. A definitive understanding of metabolic reprogramming in CSCs may complement or to some extent replace, the 30-y-old paradigm of targeting oncogenes to treat human carcinomas, because it can be possible to metabolically create non-permissive or “hostile” metabotypes to prevent the occurrence of CSC cellular states with tumor- and metastasis-initiating capacity. PMID:23549172

  12. SPLICER - A GENETIC ALGORITHM TOOL FOR SEARCH AND OPTIMIZATION, VERSION 1.0 (MACINTOSH VERSION)

    Science.gov (United States)

    Wang, L.

    1994-01-01

    representation scheme. The SPLICER tool provides representation libraries for binary strings and for permutations. These libraries contain functions for the definition, creation, and decoding of genetic strings, as well as multiple crossover and mutation operators. Furthermore, the SPLICER tool defines the appropriate interfaces to allow users to create new representation libraries. Fitness modules are the only component of the SPLICER system a user will normally need to create or alter to solve a particular problem. Fitness functions are defined and stored in interchangeable fitness modules which must be created using C language. Within a fitness module, a user can create a fitness (or scoring) function, set the initial values for various SPLICER control parameters (e.g., population size), create a function which graphically displays the best solutions as they are found, and provide descriptive information about the problem. The tool comes with several example fitness modules, while the process of developing a fitness module is fully discussed in the accompanying documentation. The user interface is event-driven and provides graphic output in windows. SPLICER is written in Think C for Apple Macintosh computers running System 6.0.3 or later and Sun series workstations running SunOS. The UNIX version is easily ported to other UNIX platforms and requires MIT's X Window System, Version 11 Revision 4 or 5, MIT's Athena Widget Set, and the Xw Widget Set. Example executables and source code are included for each machine version. The standard distribution media for the Macintosh version is a set of three 3.5 inch Macintosh format diskettes. The standard distribution medium for the UNIX version is a .25 inch streaming magnetic tape cartridge in UNIX tar format. For the UNIX version, alternate distribution media and formats are available upon request. SPLICER was developed in 1991.

  13. SPLICER - A GENETIC ALGORITHM TOOL FOR SEARCH AND OPTIMIZATION, VERSION 1.0 (MACINTOSH VERSION)

    Science.gov (United States)

    Wang, L.

    1994-01-01

    representation scheme. The SPLICER tool provides representation libraries for binary strings and for permutations. These libraries contain functions for the definition, creation, and decoding of genetic strings, as well as multiple crossover and mutation operators. Furthermore, the SPLICER tool defines the appropriate interfaces to allow users to create new representation libraries. Fitness modules are the only component of the SPLICER system a user will normally need to create or alter to solve a particular problem. Fitness functions are defined and stored in interchangeable fitness modules which must be created using C language. Within a fitness module, a user can create a fitness (or scoring) function, set the initial values for various SPLICER control parameters (e.g., population size), create a function which graphically displays the best solutions as they are found, and provide descriptive information about the problem. The tool comes with several example fitness modules, while the process of developing a fitness module is fully discussed in the accompanying documentation. The user interface is event-driven and provides graphic output in windows. SPLICER is written in Think C for Apple Macintosh computers running System 6.0.3 or later and Sun series workstations running SunOS. The UNIX version is easily ported to other UNIX platforms and requires MIT's X Window System, Version 11 Revision 4 or 5, MIT's Athena Widget Set, and the Xw Widget Set. Example executables and source code are included for each machine version. The standard distribution media for the Macintosh version is a set of three 3.5 inch Macintosh format diskettes. The standard distribution medium for the UNIX version is a .25 inch streaming magnetic tape cartridge in UNIX tar format. For the UNIX version, alternate distribution media and formats are available upon request. SPLICER was developed in 1991.

  14. GCFM Users Guide Revision for Model Version 5.0

    Energy Technology Data Exchange (ETDEWEB)

    Keimig, Mark A.; Blake, Coleman

    1981-08-10

    This paper documents alterations made to the MITRE/DOE Geothermal Cash Flow Model (GCFM) in the period of September 1980 through September 1981. Version 4.0 of GCFM was installed on the computer at the DOE San Francisco Operations Office in August 1980. This Version has also been distributed to about a dozen geothermal industry firms, for examination and potential use. During late 1980 and 1981, a few errors detected in the Version 4.0 code were corrected, resulting in Version 4.1. If you are currently using GCFM Version 4.0, it is suggested that you make the changes to your code that are described in Section 2.0. User's manual changes listed in Section 3.0 and Section 4.0 should then also be made.

  15. Simpevarp - site descriptive model version 0

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-11-01

    During 2002, SKB is starting detailed investigations at two potential sites for a deep repository in the Precambrian rocks of the Fennoscandian Shield. The present report concerns one of those sites, Simpevarp, which lies in the municipality of Oskarshamn, on the southeast coast of Sweden, about 250 kilometres south of Stockholm. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. SKB maintains two main databases at the present time, a site characterisation database called SICADA and a geographic information system called SKB GIS. The site descriptive model will be developed and presented with the aid of the SKB GIS capabilities, and with SKBs Rock Visualisation System (RVS), which is also linked to SICADA. The version 0 model forms an important framework for subsequent model versions, which are developed successively, as new information from the site investigations becomes available. Version 0 is developed out of the information available at the start of the site investigation. In the case of Simpevarp, this is essentially the information which was compiled for the Oskarshamn feasibility study, which led to the choice of that area as a favourable object for further study, together with information collected since its completion. This information, with the exception of the extensive data base from the nearby Aespoe Hard Rock Laboratory, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. Against this background, the present report consists of the following components: an overview of the present content of the databases

  16. Pythia version 7-0.0 - a proof-of-concept version

    CERN Document Server

    Bertini, M; Sjöstrand, Torbjörn; Bertini, Marc; Lonnblad, Leif; Sjostrand, Torbjorn

    2001-01-01

    This document describes the first proof-of-concept version of the Pythia7 program. Pythia7 is a complete re-write of the Pythia program in C++. It is mainly intended to be a replacement for the `Lund' family of event generators, but is also a toolkit with a structure suitable for implementing any event generator model. In this document, the structure of the program is presented both from the user and the developer point of view. It is not intended to be a complete manual, but together with the documentation provided in the distribution, it should be sufficient to start working with the program.

  17. Cleaner Coal in China [Chinese Version

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    China’s rapid economic growth has aroused intense interest around the world. Policy makers, industrialists, investors, environmentalists, researchers and others want to better understand the issues that this populous nation faces as it further develops an already thriving economy largely fuelled by coal. This study sheds light on the Chinese coal supply and transformation sectors. China’s rapid economic growth has aroused intense interest around the world. Policy makers, industrialists, investors, environmentalists, researchers and others want to better understand the issues that this populous nation faces as it further develops an already thriving economy largely fuelled by coal. This study sheds light on the Chinese coal supply and transformation sectors. China’s coal, mined locally and available at a relatively low cost, has brought enormous benefits to energy consumers in China and to those outside the country who enjoy the products of its coal-based economy. Yet from another perspective, China’s coal use has a high cost. Despite progress, health and safety in the thousands of small coal mines lag far behind the standards achieved in China’s modern, large mines. Environmental degradation is a real and pressing problem at all stages of coal production, supply and use. Adding to these burdens, emissions of carbon dioxide are of concern to the Chinese government as it embarks on its own climate protection strategy. Technology solutions are already transforming the way coal is used in China and elsewhere. This study explores the context in which the development and deployment of these technologies can be accelerated. Providing a large amount of new data, it describes in detail the situation in China as well as the experiences of other countries in making coal cleaner. Above all, the report calls for much greater levels of collaboration – existing bi-lateral and multi-lateral co-operation with China on coal is found lacking. China’s growing openness

  18. Assessment of radionuclide databases in CAP88 mainframe version 1.0 and Windows-based version 3.0.

    Science.gov (United States)

    LaBone, Elizabeth D; Farfán, Eduardo B; Lee, Patricia L; Jannik, G Timothy; Donnelly, Elizabeth H; Foley, Trevor Q

    2009-09-01

    In this study the radionuclide databases for two versions of the Clean Air Act Assessment Package-1988 (CAP88) computer model were assessed in detail. CAP88 estimates radiation dose and the risk of health effects to human populations from radionuclide emissions to air. This program is used by several U.S. Department of Energy (DOE) facilities to comply with National Emission Standards for Hazardous Air Pollutants regulations. CAP88 Mainframe, referred to as version 1.0 on the U.S. Environmental Protection Agency Web site (http://www.epa.gov/radiation/assessment/CAP88/), was the very first CAP88 version released in 1988. Some DOE facilities including the Savannah River Site still employ this version (1.0) while others use the more user-friendly personal computer Windows-based version 3.0 released in December 2007. Version 1.0 uses the program RADRISK based on International Commission on Radiological Protection Publication 30 as its radionuclide database. Version 3.0 uses half-life, dose, and risk factor values based on Federal Guidance Report 13. Differences in these values could cause different results for the same input exposure data (same scenario), depending on which version of CAP88 is used. Consequently, the differences between the two versions are being assessed in detail at Savannah River National Laboratory. The version 1.0 and 3.0 database files contain 496 and 838 radionuclides, respectively, and though one would expect the newer version to include all the 496 radionuclides, 35 radionuclides are listed in version 1.0 that are not included in version 3.0. The majority of these has either extremely short or long half-lives or is no longer in production; however, some of the short-lived radionuclides might produce progeny of great interest at DOE sites. In addition, 122 radionuclides were found to have different half-lives in the two versions, with 21 over 3 percent different and 12 over 10 percent different.

  19. ASSESSMENT OF RADIONUCLIDES DATABASES IN CAP88 MAINFRAME VERSION 1.0 AND WINDOWS-BASED VERSION 3.0

    Energy Technology Data Exchange (ETDEWEB)

    Farfan, E.; Lee, P.; Jannik, T.; Donnelly, E.

    2008-09-16

    In this study the radionuclide databases for two versions of the Clean Air Act Assessment Package-1988 (CAP88) computer model were assessed in detail. CAP88 estimates radiation dose and the risk of health effects to human populations from radionuclide emissions to air. This program is used by several Department of Energy (DOE) facilities to comply with National Emission Standards for Hazardous Air Pollutants (NESHAP) regulations. CAP88 Mainframe, referred to as Version 1.0 on the Environmental Protection Agency (EPA) website (http://www.epa.gov/radiation/assessment/CAP88/), was the very first CAP88 version released in 1988. Some DOE facilities including the Savannah River Site still employ this version (1.0) while others use the more user-friendly personal computer Windows-based Version 3.0 released in December 2007. Version 1.0 uses the program RADRISK based on International Commission on Radiological Protection (ICRP) Publication 30 as its radionuclide database. Version 3.0 uses half-life, dose and risk factor values based on Federal Guidance Report 13. Differences in these values could cause different results for the same input exposure data (same scenario), depending on which version of CAP88 is used. Consequently, the differences between the two versions are being assessed in detail at Savannah River National Laboratory. The version 1.0 and 3.0 database files contain 496 and 838 radionuclides, respectively, and though one would expect the newer version to include all the 496 radionuclides, thirty-five radionuclides are listed in version 1.0 that are not included in version 3.0. The majority of these has either extremely short or long half-lives or is no longer in production; however, some of the short-lived radionuclides might produce progeny of great interest at DOE sites. In addition, one hundred and twenty-two radionuclides were found to have different half-lives in the two versions, with 21 over 3 percent different and 12 over 10 percent different.

  20. Users guide for ENVSTD program Version 2. 0 and LTGSTD program Version 2. 0

    Energy Technology Data Exchange (ETDEWEB)

    Crawley, D.B.; Riesen, P.K.; Briggs, R.S.

    1989-02-01

    On January 30, 1989, the US Department of Energy (DOE) promulgated 10 CFR Part 435, Subpart A, an Interim Rule entitled ''Energy Conservation Voluntary Performance Standards for New Commercial and Multi-Family High Rise Residential Buildings; Mandatory for New Federal Buildings.'' As a consequence, federal agencies must design all future federal commercial and multifamily high rise residential buildings in accordance with the Standards, or show that their current standards already meet or exceed the energy-efficiency requirements of the Standards. Although these newly enacted Standards do not regulate the design of nonfederal buildings, DOE recommends that all design professionals use the Standards as guidelines for designing energy-conserving buildings. To encourage private sector use, the Standards were presented in the January 30, 1989, Federal Register in the format typical of commercial standards rather than a federal regulation. As a further help, DOE supported the development of various microcomputer programs to ease the use of the Standards. Two of these programs/emdash/ENVSTD (Version 2.0) and LTGSTD (Version 2.0)/emdash/are detailed in this users guide and provided on the accompanying diskette. This package, developed by Pacific Northwest Laboratory (PNL), is intended to facilitate the designer's use of the Standards dealing specifically with a building's envelope and lighting system designs. Using these programs will greatly simplify the designer's task of performing the sometimes complex calculations needed to determine a design's compliance with the Standards. 3 refs., 6 figs.

  1. APEX version 2.0: latest version of the cross-platform analysis program for EXAFS.

    Science.gov (United States)

    Dimakis, N; Bunker, G

    2001-03-01

    This report describes recent progress on APEX, a free, open source, cross platform set of EXAFS data analysis software. In a previous report we described APEX 1.0 (Dimakis, N. and Bunker, G., 1999), a free and open source code suite of basic X-Ray Absorption Fine Structure (XAFS) data analysis programs for classical data reduction and single scattering analysis. The first version of APEX was the only cross platform (linux/irix/windows/MacOS) EXAFS analysis program to our knowledge, but it lacked important features like multiple scattering fitting, generic format conversion from ASCII to University of Washington (UW) binary-type files, and user friendly interactive graphics. In the enhanced version described here we have added cross-platform interactive graphics based on the BLT package, which is an extension to TCL/TK. Some of the utilities have been rewritten in native TCL/TK, allowing for faster and more integrated functionality with the main package. The package also has been ported to SunOS. APEX 2.0 in its current form is suitable for routine data analysis and training. Addition of more advanced methods of data analysis are planned.

  2. Basis for a neuronal version of Grover's quantum algorithm.

    Science.gov (United States)

    Clark, Kevin B

    2014-01-01

    Grover's quantum (search) algorithm exploits principles of quantum information theory and computation to surpass the strong Church-Turing limit governing classical computers. The algorithm initializes a search field into superposed N (eigen)states to later execute nonclassical "subroutines" involving unitary phase shifts of measured states and to produce root-rate or quadratic gain in the algorithmic time (O(N (1/2))) needed to find some "target" solution m. Akin to this fast technological search algorithm, single eukaryotic cells, such as differentiated neurons, perform natural quadratic speed-up in the search for appropriate store-operated Ca(2+) response regulation of, among other processes, protein and lipid biosynthesis, cell energetics, stress responses, cell fate and death, synaptic plasticity, and immunoprotection. Such speed-up in cellular decision making results from spatiotemporal dynamics of networked intracellular Ca(2+)-induced Ca(2+) release and the search (or signaling) velocity of Ca(2+) wave propagation. As chemical processes, such as the duration of Ca(2+) mobilization, become rate-limiting over interstore distances, Ca(2+) waves quadratically decrease interstore-travel time from slow saltatory to fast continuous gradients proportional to the square-root of the classical Ca(2+) diffusion coefficient, D (1/2), matching the computing efficiency of Grover's quantum algorithm. In this Hypothesis and Theory article, I elaborate on these traits using a fire-diffuse-fire model of store-operated cytosolic Ca(2+) signaling valid for glutamatergic neurons. Salient model features corresponding to Grover's quantum algorithm are parameterized to meet requirements for the Oracle Hadamard transform and Grover's iteration. A neuronal version of Grover's quantum algorithm figures to benefit signal coincidence detection and integration, bidirectional synaptic plasticity, and other vital cell functions by rapidly selecting, ordering, and/or counting optional

  3. New evolutions in TRNSYS : a selection of version 16 features

    Energy Technology Data Exchange (ETDEWEB)

    Bradley, D. [Thermal Energy System Specialists, Madison, WI (United States); Kummert, M. [Wisconsin Univ., Madison, WI (United States). Solar Energy Laboratory

    2005-07-01

    TRNSYS is a transient energy simulation package that has undergone continuous improvement since its development in 1975. TRNSYS was initially developed for the simulation of solar thermal processes, but has since expanded into a total energy modeling package. It models each component of an energy system as an individual black box component. Simulating a system involves connecting the inputs and outputs of the components to one another. If certain models are missing, they are quickly developed and added to the package by the international group of developers and users which include the Solar Energy Laboratory at the University of Wisconsin in Madison United States, the Centre Scientifique et Technique du Batiment in Nice France, and Transsolar Energietechnik GmBH in Stuttgart, Germany. This paper presented some of the issues faced by the users in updating the TRNSYS simulation tool to meet the challenges posed by new technologies and to make use of better algorithms and updated computing resources. In particular, it focused on adding new component models to the program and on increasing the ease of use of the program and continuing the trend to move TRNSYS from an academic research tool to a manageable commercial tool. The subset of the features that were added to the sixteenth version of the simulation package in November 2004 were presented. These include modeling the energy transfer between a conditioned building and the surrounding ground, implementing ASHRAE's effective Heat Flow method into TRNSYS, and implementing combined thermal/air flow simulations using a software link between TRNSYS and COMIS or CONTAM for the air flow simulation. A brief description of the hydrogen system components which model hydrogen power systems was also included along with graphical interface enhancements, and a description of simulation engine modifications such as starting time and the drop-in dynamic link libraries (DLL). 12 refs., 5 figs.

  4. CHP Technologies

    Science.gov (United States)

    Learn about CHP technologies, including reciprocating engines, combustion turbines, steam turbines, microturbines, fuel cells, and waste heat to power. Access the Catalog of CHP Technologies and the Biomass CHP Catalog of Technologies.

  5. Assistive Technology

    Science.gov (United States)

    ... Page Resize Text Printer Friendly Online Chat Assistive Technology Assistive technology (AT) is any service or tool that helps ... be difficult or impossible. For older adults, such technology may be a walker to improve mobility or ...

  6. CLIPS - C LANGUAGE INTEGRATED PRODUCTION SYSTEM (IBM PC VERSION)

    Science.gov (United States)

    Riley, G.

    1994-01-01

    The C Language Integrated Production System, CLIPS, is a shell for developing expert systems. It is designed to allow artificial intelligence research, development, and delivery on conventional computers. The primary design goals for CLIPS are portability, efficiency, and functionality. For these reasons, the program is written in C. CLIPS meets or outperforms most micro- and minicomputer based artificial intelligence tools. CLIPS is a forward chaining rule-based language. The program contains an inference engine and a language syntax that provide a framework for the construction of an expert system. It also includes tools for debugging an application. CLIPS is based on the Rete algorithm, which enables very efficient pattern matching. The collection of conditions and actions to be taken if the conditions are met is constructed into a rule network. As facts are asserted either prior to or during a session, CLIPS pattern-matches the number of fields. Wildcards and variables are supported for both single and multiple fields. CLIPS syntax allows the inclusion of externally defined functions (outside functions which are written in a language other than CLIPS). CLIPS itself can be embedded in a program such that the expert system is available as a simple subroutine call. Advanced features found in CLIPS version 4.3 include an integrated microEMACS editor, the ability to generate C source code from a CLIPS rule base to produce a dedicated executable, binary load and save capabilities for CLIPS rule bases, and the utility program CRSV (Cross-Reference, Style, and Verification) designed to facilitate the development and maintenance of large rule bases. Five machine versions are available. Each machine version includes the source and the executable for that machine. The UNIX version includes the source and binaries for IBM RS/6000, Sun3 series, and Sun4 series computers. The UNIX, DEC VAX, and DEC RISC Workstation versions are line oriented. The PC version and the Macintosh

  7. CLIPS - C LANGUAGE INTEGRATED PRODUCTION SYSTEM (MACINTOSH VERSION)

    Science.gov (United States)

    Culbert, C.

    1994-01-01

    The C Language Integrated Production System, CLIPS, is a shell for developing expert systems. It is designed to allow artificial intelligence research, development, and delivery on conventional computers. The primary design goals for CLIPS are portability, efficiency, and functionality. For these reasons, the program is written in C. CLIPS meets or outperforms most micro- and minicomputer based artificial intelligence tools. CLIPS is a forward chaining rule-based language. The program contains an inference engine and a language syntax that provide a framework for the construction of an expert system. It also includes tools for debugging an application. CLIPS is based on the Rete algorithm, which enables very efficient pattern matching. The collection of conditions and actions to be taken if the conditions are met is constructed into a rule network. As facts are asserted either prior to or during a session, CLIPS pattern-matches the number of fields. Wildcards and variables are supported for both single and multiple fields. CLIPS syntax allows the inclusion of externally defined functions (outside functions which are written in a language other than CLIPS). CLIPS itself can be embedded in a program such that the expert system is available as a simple subroutine call. Advanced features found in CLIPS version 4.3 include an integrated microEMACS editor, the ability to generate C source code from a CLIPS rule base to produce a dedicated executable, binary load and save capabilities for CLIPS rule bases, and the utility program CRSV (Cross-Reference, Style, and Verification) designed to facilitate the development and maintenance of large rule bases. Five machine versions are available. Each machine version includes the source and the executable for that machine. The UNIX version includes the source and binaries for IBM RS/6000, Sun3 series, and Sun4 series computers. The UNIX, DEC VAX, and DEC RISC Workstation versions are line oriented. The PC version and the Macintosh

  8. An HTTP-Based Versioning Mechanism for Linked Data

    CERN Document Server

    Van de Sompel, Herbert; Nelson, Michael L; Balakireva, Lyudmila L; Shankar, Harihar; Ainsworth, Scott

    2010-01-01

    Dereferencing a URI returns a representation of the current state of the resource identified by that URI. But, on the Web representations of prior states of a resource are also available, for example, as resource versions in Content Management Systems or archival resources in Web Archives such as the Internet Archive. This paper introduces a resource versioning mechanism that is fully based on HTTP and uses datetime as a global version indicator. The approach allows "follow your nose" style navigation both from the current time-generic resource to associated time-specific version resources as well as among version resources. The proposed versioning mechanism is congruent with the Architecture of the World Wide Web, and is based on the Memento framework that extends HTTP with transparent content negotiation in the datetime dimension. The paper shows how the versioning approach applies to Linked Data, and by means of a demonstrator built for DBpedia, it also illustrates how it can be used to conduct a time-seri...

  9. 学习模式及其应用——《教育传播与技术研究手册(第三版)》第四部分述评%Learning Models and Its Application:Review on Part IV of Handbook of Research on Educational Communications and Technology (3rd Version)

    Institute of Scientific and Technical Information of China (English)

    焦建利; 何秋琳; 詹春青

    2010-01-01

    概要介绍并评述了J.Michael Spector,M.David Merrill,Jeroen van Merrienboer和Marcy P.Driscoll主编的[Handbook of Research on Educational Communication and Technology (Third edidon),Lawrence Erlbaum Associates2008年出版]第四部分"学习模式",共分为四个部分:在人类认知结构与基于技术的教学部分,回顾了人类认知结构的进化基础和认知负荷理论提出的五条教学原理;在九种面向学校内外的学习通用模式部分,分析了教育传播与技术视角下的九种学习通用模式;在模式特定领域与专业中的应用部分,讨论了各种模式在阅读、数学、科学、法律以及医学五个领域的应用;最后对教育传播与技术学习模式研究基础的特点及各学习模式之间的关系进行了讨论、总结和展望.

  10. Two versions of Nakayama lemma for multiplication modules

    Directory of Open Access Journals (Sweden)

    Reza Ameri

    2004-01-01

    Full Text Available The aim of this note is to generalize the Nakayama lemma to a class of multiplication modules over commutative rings with identity. In this note, by considering the notion of multiplication modules and the product of submodules of them, we state and prove two versions of Nakayama lemma for such modules. In the first version we give some equivalent conditions for faithful finitely generated multiplication modules, and in the second version we give them for faithful multiplication modules with a minimal generating set.

  11. Model Adequacy Analysis of Matching Record Versions in Nosql Databases

    Directory of Open Access Journals (Sweden)

    E. V. Tsviashchenko

    2015-01-01

    Full Text Available The article investigates a model of matching record versions. The goal of this work is to analyse the model adequacy. This model allows estimating a user’s processing time distribution of the record versions and a distribution of the record versions count. The second option of the model was used, according to which, for a client the time to process record versions depends explicitly on the number of updates, performed by the other users between the sequential updates performed by a current client. In order to prove the model adequacy the real experiment was conducted in the cloud cluster. The cluster contains 10 virtual nodes, provided by DigitalOcean Company. The Ubuntu Server 14.04 was used as an operating system (OS. The NoSQL system Riak was chosen for experiments. In the Riak 2.0 version and later provide “dotted vector versions” (DVV option, which is an extension of the classic vector clock. Their use guarantees, that the versions count, simultaneously stored in DB, will not exceed the count of clients, operating in parallel with a record. This is very important while conducting experiments. For developing the application the java library, provided by Riak, was used. The processes run directly on the nodes. In experiment two records were used. They are: Z – the record, versions of which are handled by clients; RZ – service record, which contains record update counters. The application algorithm can be briefly described as follows: every client reads versions of the record Z, processes its updates using the RZ record counters, and saves treated record in database while old versions are deleted form DB. Then, a client rereads the RZ record and increments counters of updates for the other clients. After that, a client rereads the Z record, saves necessary statistics, and deliberates the results of processing. In the case of emerging conflict because of simultaneous updates of the RZ record, the client obtains all versions of that

  12. Mobile Technology and Health Care, From NIH Director Dr. Francis S. Collins | NIH MedlinePlus the Magazine

    Science.gov (United States)

    ... version of this page please turn Javascript on. Mobile Technology and Health Care, From NIH Director Dr. Francis S. ... Contents Mobile health, or mHealth for short, uses mobile technologies for health research and healthcare delivery. At last ...

  13. Factor Structure Evaluation of the French Version of the Digital Natives Assessment Scale.

    Science.gov (United States)

    Wagner, Vincent; Acier, Didier

    2017-03-01

    "Digital natives" concept defines young adults particularly familiar with emerging technologies such as computers, smartphones, or Internet. This notion is still controversial and so far, the primary identifying criterion was to consider their date of birth. However, literature highlighted the need to describe specific characteristics. The purpose of this research was to evaluate the factor structure of a French version of the Digital Natives Assessment Scale (DNAS). The sample of this study includes 590 participants from a 6-week massive open online course and from Web sites, electronic forums, and social networks. The DNAS was translated in French and then back-translated to English. A principal component analysis with orthogonal rotation followed by a confirmatory factorial analysis showed that a 15-item four-correlated component model provided the best fit for the data of our sample. Factor structure of this French-translated version of the DNAS was rather similar than those found in earlier studies. This study provides evidence of the DNAS robustness through cross-cultural and cross-generational validation. The French version of the DNAS appears to be appropriate as a quick and effective questionnaire to assess digital natives. More studies are needed to better define further features of this particular group.

  14. Algal Supply System Design - Harmonized Version

    Energy Technology Data Exchange (ETDEWEB)

    Jared Abodeely; Daniel Stevens; Allison Ray; Debor

    2013-03-01

    The objective of this design report is to provide an assessment of current technologies used for production, dewatering, and converting microalgae cultivated in open-pond systems to biofuel. The original draft design was created in 2011 and has subsequently been brought into agreement with the DOE harmonized model. The design report extends beyond this harmonized model to discuss some of the challenges with assessing algal production systems, including the ability to (1) quickly assess alternative algal production system designs, (2) assess spatial and temporal variability, and (3) perform large-scale assessments considering multiple scenarios for thousands of potential sites. The Algae Logistics Model (ALM) was developed to address each of these limitations of current modeling efforts to enable assessment of the economic feasibility of algal production systems across the United States. The (ALM) enables (1) dynamic assessments using spatiotemporal conditions, (2) exploration of algal production system design configurations, (3) investigation of algal production system operating assumptions, and (4) trade-off assessments with technology decisions and operating assumptions. The report discusses results from the ALM, which is used to assess the baseline design determined by harmonization efforts between U.S. DOE national laboratories. Productivity and resource assessment data is provided by coupling the ALM with the Biomass Assessment Tool developed at PNNL. This high-fidelity data is dynamically passed to the ALM and used to help better understand the impacts of spatial and temporal constraints on algal production systems by providing a cost for producing extracted algal lipids annually for each potential site.

  15. Genre Analysis:Comparison between the Original Version of The Won-derful Wizard of Oz and One Version of Its Abridgements

    Institute of Scientific and Technical Information of China (English)

    律琳琳

    2014-01-01

    The Wonderful Wizard of Oz is a world-renowned novel . This essay compares the original version and one abridged version. The abridged version keeps the main plot of the original version and easy to read, but loses the embedded message and decreases pleasure of reading. It may help varied readers choose literary works and induct ELS teachers to arrange reading lists for students.

  16. Procedure guideline for radioiodine test (version 3); Verfahrensanweisung zum Radioiodtest (Version 3)

    Energy Technology Data Exchange (ETDEWEB)

    Dietlein, M.; Schicha, H. [Deutsche Gesellschaft fuer Nuklearmedizin (DGN) (Germany); Koeln Univ. (Germany). Klinik und Poliklinik fuer Nuklearmedizin; Dressler, J. [Deutsche Gesellschaft fuer Nuklearmedizin (DGN) (Germany); Nuklearmedizinische Klinik der Henriettenstiftung, Hannover (Germany); Eschner, W. [Deutsche Gesellschaft fuer Nuklearmedizin (DGN) (Germany); Deutsche Gesellschaft fuer Medizinische Physik (DGMP) (Germany); Koeln Univ. (Germany). Klinik und Poliklinik fuer Nuklearmedizin; Lassmann, M. [Deutsche Gesellschaft fuer Nuklearmedizin (DGN) (Germany); Deutsche Gesellschaft fuer Medizinische Physik (DGMP) (Germany); Wuerzburg Univ. (Germany). Klinik und Poliklinik fuer Nuklearmedizin; Leisner, B. [Deutsche Gesellschaft fuer Nuklearmedizin (DGN) (Germany); Allgemeines Krankenhaus St. Georg, Hamburg (Germany). Abt. fuer Nuklearmedizin; Reiners, C. [Deutsche Gesellschaft fuer Nuklearmedizin (DGN) (Germany); Wuerzburg Univ. (Germany). Klinik und Poliklinik fuer Nuklearmedizin

    2007-07-01

    The version 3 of the procedure guideline for radioiodine test is an update of the guideline previously published in 2003. The procedure guideline discusses the pros and cons of a single measurement or of repeated measurements of the iodine-131 uptake and their optimal timing. Different formulas are described when one, two or three values of the radioiodine kinetic are available. The probe with a sodium-iodine crystal, alternatively or additionally the gamma camera using the ROI-technique are instrumentations for the measurement of iodine-131 uptake. A possible source of error is an inappropriate measurement (sonography) of the target volume. The patients' preparation includes the withdrawal of antithyroid drugs 2-3 days before radioiodine administration. The patient has to avoid iodine-containing medication and the possibility of additives of iodine in vitamin- and electrolyte-supplementation has to be considered. (orig.)

  17. Feasibility Study of Integrating IDELIX’s Pliable Display Technology into the COPlanS Technology Demonstration Software

    Science.gov (United States)

    2005-03-31

    Feasibility Study of Integrating IDELIX’s Pliable Display Technology into the COPlanS Technology Demonstration Software Issue Number: Version 1... Technology Demonstration Software 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f...Collaborative Operations Planning System (COPlanS) technology demonstration software in the areas of collaboration and data visualization using IDELIX’s Pliable

  18. New Version of the AGRIS Web Portal – Overcoming the Digital Divide by Providing Rural Areas with Relevant Information

    Directory of Open Access Journals (Sweden)

    P. Šimek

    2011-12-01

    Full Text Available The present paper brings the outcomes of the second stage of a complex AGRIS web portal upgrade (technological, functional, content and design upgrade called Agris 5.0. The Agris 5.0 version is recently being tested and will be launched in January 2012 on http://www.agris.cz. Agris 5.0 is built and runs on Microsoft technologies (MS Windows Server 2008, MS IIS 7 web server, MS SQL Server 2008 Enterprise Edition, SP2 using the Model-View-Controller (MVC SW architectural pattern version 3, .NET framework 4, programming language C#, Razor template system, XML and XHTML 1.1 markup languages, CSS 2.1 styles and JavaScript encoding with the jQuery framework. From the user point of view, the Agris portal usability and availability meeting international standards were the utmost priority of the present upgrade.

  19. Original Research Psychometric evaluation of the Shona version of ...

    African Journals Online (AJOL)

    were performed to assess the structural validity of the MSPSS-Shona version. Reliability was assessed .... term conditions like diabetes, HIV/AIDS among others were similarly excluded ..... Given the high literacy level of the study participants,.

  20. U.S. Climate Divisional Dataset (Version Superseded)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data has been superseded by a newer version of the dataset. Please refer to NOAA's Climate Divisional Database for more information. The U.S. Climate Divisional...

  1. Climate Forecast System Version 2 (CFSv2) Operational Forecasts

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Climate Forecast System Version 2 (CFSv2) produced by the NOAA National Centers for Environmental Prediction (NCEP) is a fully coupled model representing the...

  2. Global Historical Climatology Network - Daily (GHCN-Daily), Version 3

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Global Historical Climatology Network - Daily (GHCN-Daily) dataset integrates daily climate observations from approximately 30 different data sources. Version 3...

  3. Geostationary Surface and Insolation Products (GSIP), Version 3

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Geostationary Surface and Insolation Products (GSIP) Version 3 contains upwelling and downwelling shortwave (0.2-4.0 um) and visible (0.4-0.7 um) radiative...

  4. Global Precipitation Climatology Project (GPCP) - Pentad, Version 2.2

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Global Precipitation Climatology Project (GPCP) comprises a total of 27 products. The Version 2.2 Pentad product covers the period January 1979 to the present,...

  5. Industrial Waste Management Evaluation Model Version 3.1

    Science.gov (United States)

    IWEM is a screening level ground water model designed to simulate contaminant fate and transport. IWEM v3.1 is the latest version of the IWEM software, which includes additional tools to evaluate the beneficial use of industrial materials

  6. Measurable versions of the LS category on laminations

    CERN Document Server

    Meniño, Carlos

    2011-01-01

    We give two new versions of the LS category for the set-up of measurable laminations defined by Berm\\'udez. Both of these versions must be considered as "tangential categories". The first one, simply called (LS) category, is the direct analogue for measurable laminations of the tangential category of (topological) laminations introduced by Colman Vale and Mac\\'ias Virg\\'os. For the measurable lamination that underlies any lamination, our measurable tangential category is a lower bound of the tangential category. The second version, called the measured category, depends on the choice of a transverse invariant measure. We show that both of these "tangential categories" satisfy appropriate versions of some well known properties of the classical category: the homotopy invariance, a dimensional upper bound, a cohomological lower bound (cup length), and an upper bound given by the critical points of a smooth function.

  7. Climate Forecast System Version 2 (CFSv2) Operational Analysis

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Climate Forecast System Version 2 (CFSv2) produced by the NOAA National Centers for Environmental Prediction (NCEP) is a fully coupled model representing the...

  8. Multiclass Classification Based on the Analytical Center of Version Space

    Institute of Scientific and Technical Information of China (English)

    ZENGFanzi; QIUZhengding; YUEJianhai; LIXiangqian

    2005-01-01

    Analytical center machine, based on the analytical center of version space, outperforms support vector machine, especially when the version space is elongated or asymmetric. While analytical center machine for binary classification is well understood, little is known about corresponding multiclass classification.Moreover, considering that the current multiclass classification method: “one versus all” needs repeatedly constructing classifiers to separate a single class from all the others, which leads to daunting computation and low efficiency of classification, and that though multiclass support vector machine corresponds to a simple quadratic optimization, it is not very effective when the version spaceis asymmetric or elongated, Thus, the multiclass classification approach based on the analytical center of version space is proposed to address the above problems. Experiments on wine recognition and glass identification dataset demonstrate validity of the approach proposed.

  9. Acetabular fracture types vary with different acetabular version

    National Research Council Canada - National Science Library

    Werner, Clément M. L; Copeland, Carol E; Ruckstuhl, Thomas; Stromberg, Jeff; Turen, Clifford H; Bouaicha, Samy

    2012-01-01

    .... While several investigations figured out what role femoral position during impact plays in distinct fracture patterns, no data exists on the influence of acetabular version on the fracture type...

  10. Global Precipitation Climatology Project (GPCP) - Daily, Version 1.2

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Global Precipitation Climatology Project (GPCP) comprises a total of 27 products. The Version 1.2 Daily product covers the period October 1998 to the present,...

  11. Nuclear Criticality Safety Handbook, Version 2. English translation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-08-01

    The Nuclear Criticality Safety Handbook, Version 2 essentially includes the description of the Supplement Report to the Nuclear Criticality Safety Handbook, released in 1995, into the first version of the Nuclear Criticality Safety Handbook, published in 1988. The following two points are new: (1) exemplifying safety margins related to modeled dissolution and extraction processes, (2) describing evaluation methods and alarm system for criticality accidents. Revision has been made based on previous studies for the chapter that treats modeling the fuel system: e.g., the fuel grain size that the system can be regarded as homogeneous, non-uniformity effect of fuel solution, an burnup credit. This revision has solved the inconsistencies found in the first version between the evaluation of errors found in JACS code system and the criticality condition data that were calculated based on the evaluation. This report is an English translation of the Nuclear Criticality Safety Handbook, Version 2, originally published in Japanese as JAERI 1340 in 1999. (author)

  12. CODEX: exploration of semantic changes between ontology versions.

    Science.gov (United States)

    Hartung, Michael; Gross, Anika; Rahm, Erhard

    2012-03-15

    Life science ontologies substantially change over time to meet the requirements of their users and to include the newest domain knowledge. Thus, an important task is to know what has been modified between two versions of an ontology (diff). This diff should contain all performed changes as compact and understandable as possible. We present CODEX (Complex Ontology Diff Explorer), a tool that allows determining semantic changes between two versions of an ontology, which users can interactively analyze in multiple ways.

  13. An all-FORTRAN version of NASTRAN for the VAX

    Science.gov (United States)

    Purves, L.

    1981-01-01

    All FORTRAN version of NASA structural analysis program NASATRAN is implemented on DEC VAX-series computer. Applications of NASATRAN extend to almost every type of linear structure and construction. Two special features are available in VAX version; program is executed from terminal in manner permitting use of VAX interactive debugger, and links are interactively restarted when desired by first making copy of all NASATRAN work files.

  14. Primary Hyperparathyroidism [version 1; referees: 2 approved

    Directory of Open Access Journals (Sweden)

    Leonardo Bandeira

    2016-01-01

    Full Text Available Over the past several generations, primary hyperparathyroidism (PHTP has undergone a change in its clinical presentation in many countries from a symptomatic disease to an asymptomatic one. The reasons for this change in clinical presentation are related to the widespread use of biochemical screening tests, to the measurement of PTH more routinely in the evaluation of metabolic bone disease and to the status of vitamin D sufficiency in the population. Along with recognition of a broader clinical spectrum of disease, including a more recently recognized normocalcemic variant, has come an appreciation that the evaluation of classic target organs that can be affected in PHPT, such as the skeleton and the kidneys, require more advanced imaging technology for complete evaluation. It is clear that even in asymptomatic patients, evidence for microstructural disease in the skeleton and calcifications in the kidneys can be demonstrated often. Potential non-classical manifestations of PHPT related to neurocognition and the cardiovascular system continue to be of interest. As a result of these advances, revised guidelines for the management of asymptomatic PHPT have been recently published to help the clinician determine whether surgery is appropriate or whether a more conservative approach is acceptable.

  15. Minerva User Manual Version 1.0

    Energy Technology Data Exchange (ETDEWEB)

    J.J. Cogliati; M. L. Milvich; D. E. Wessol; C. A. Wemple

    2007-03-01

    MINERVA (Modality-Inclusive Environment for Radiotherapeutic Variable Analysis) is a Java-based patient-centric radiation treatment planning system (RTPS) for computational dosimetry and treatment planning in emerging areas of radiotherapy for cancer and other diseases. MINERVA was primarily developed at the Idaho National Laboratory (INL) and Montana State University (MSU). MINERVA allows the radiotherapist to make side-by-side comparison of plans for multiple treatment modalities with a common anatomical basis for the computational geometry, calculate doses for combinations of different radiotherapy modalities, and perform dose analysis and reporting functions. This provides the therapist with a consistent basis for selecting the modality or combination of modalities to use for treatment of the patient. MINERVA employs an integrated, lightweight plug-in architecture to accommodate multi-modal treatment planning using standard interface components. The MINERVA design facilitates integration of improved or emerging treatment planning technologies. MINERVA consists of the basic radiation treatment planning software modules managed by a consistent patient interface for developing multi-modal radiotherapy patient treatment plans. One of MINERVA's main functions is to provide a graphical environment for constructing and displaying uniform volume-element-based solid models derived from medical images. These solid models form the geometric basis of the target areas for the radiation transport model.

  16. EnviroInfo 2004 - French version only

    CERN Multimedia

    2004-01-01

    http://www.cern.ch/cern50/ CERN, 21, 22 et 23 octobre Sh@ring Pour sa 18e édition, la Conférence internationale sur les nouvelles technologies de l'information appliquée à la protection de l'environnement et au développement durable a choisi de privilégier le thème du partage : le partage technologique, en insistant sur la nécessité de promouvoir les actions de transfert technologique dans l'esprit du respect des principes de développement durable (transfert Nord/Sud, transfert de connaissances, valorisation de la recherche sur le Web, partenariat privé-public,...) ; le partage des données, dans l'esprit d'une plus grande transparence de l'information publique et de l'amélioration des flux d'information entre les différentes administrations (Partage des connaissances environnementales, santé et risques environnementaux, ...). Les présentations s'arti...

  17. A Performance Comparison for Two Versions of the Vulcan Photometer

    Science.gov (United States)

    Borucki, W. J.; Caldwell, D. A.; Koch, D. G.; Jenkins, J. M.; Showen, R. L.

    2001-01-01

    Analysis of the images produced by the first version (V1) of the Vulcan photometer indicated that two major sources of noise were sky brightness and image motion. To reduce the effect of the sky brightness, a second version (V2) with a longer focal length and a larger format detector was developed and tested. The first version consisted of 15-centimeter (cm) focal length, F/1.5 Aerojet Delft reconnaissance lens, and a 2048 x 2048 format front-illuminated charged coupled device (CCD) with 9 microns micropixels (Mpixels). The second version used a 30-cm focal length, F/2.5 Kodak AeroEktar lens, and a 4096 x 4096 format CCD with 9 micro pixels. Both have a 49-square-degree field of view (FOV) but the area of the sky subtended by each pixel in the V2 version is one-fourth that of the V1 version. This modification substantially reduces the shot noise due to the sky background and allows fainter stars to be monitored for planetary transits. To remove the data gap and consequent signal-level change caused by flipping the photometer around the declination axis and to reduce image movement on the detector, several other modifications were incorporated. These include modifying the mount and stiffening the photometer and autoguider structures to reduce flexure. This paper compares the performance characteristics of each photometer and discusses tests to identify sources of systematic noise.

  18. Validation of a Persian version of the OIDP index

    Directory of Open Access Journals (Sweden)

    Sheiham Aubrey

    2007-01-01

    Full Text Available Abstract Background Measuring the impacts of oral conditions on quality of life is an important part of oral health needs assessment. For this purpose a variety of oral health-related quality of life instruments have been developed. To use a scale in a new context or with a different groups of people, it is necessary to re-establish its psychometric properties. The objectives of this study are to develop and test the reliability and validity of the Persian version of Oral Impacts on Daily Performances (OIDP index. Methods The Persian version of OIDP index was developed through a linguistic translation exercise. The psychometric properties of the Persian version of OIDP were evaluated in terms of face, content, construct and criterion validity in addition to internal and test-retest reliability. A convenience sample of 285 working adults aged 20–50 living in Mashad was recruited (91% response rate to evaluate the Persian version. Results The Persian version of OIDP had excellent validity and reliability charactersitics. Weighted Kappa was 0.91. Cronbachs alpha coefficient was 0.79. The index showed significant associations with self-rated oral and general health status, as well as perceived dental treatment needs, satisfaction with mouth and prevalence of pain in mouth (P Conclusion The Persian version of OIDP index is a valid and reliable measure for use in 20 to 50 year old working Iranians.

  19. Special population planner, version 4.0.

    Energy Technology Data Exchange (ETDEWEB)

    Kuiper, J.; Tanzman, E.; Metz, W.

    2007-03-26

    Emergencies happen every day. Many are caused by storms or auto accidents and can be planned for, if not predicted. Emergencies resulting from natural hazards often affect a large number of people, and planning for them can be difficult, since knowledge of the needs of the people involved is generally unavailable. Emergencies resulting from accidents at industrial and military facilities can also be large scale in nature if people must be evacuated or sheltered in place. Federal planning for large scale emergencies is the responsibility of the Federal Emergency Management Agency (FEMA), which provides assistance to various emergency management agencies at the national, state and local level. More information about FEMA is available at http://www.fema.gov/. The purpose of the Special Population Planner (SPP) is to help emergency planners address the needs of persons with special needs. The exact definition of 'special population' is a policy decision. Policymakers have included a variety of groups in this term, such as persons with disabilities, those who do not have vehicles with which to evacuate, children who are unattended at times (latchkey children), and many others. The SPP was developed initially for the Alabama Emergency Management Agency as part of its Chemical Stockpile Emergency Preparedness Program (CSEPP), which aids emergency planning and preparedness in communities surrounding military installations across the United States where chemical weapons are stored pending their destruction under federal law. Like that specialized application, this open-source version contains a set of specialized Geographic Information System (GIS) tools to facilitate emergency planning on behalf of persons with special needs, regardless of how the term is defined. While the original SPP system was developed for emergency planning relating to chemical hazards, it can be applied to other threats as well. It is apparent from Hurricane Katrina and other natural and

  20. A Comparative Review Of Internet Protocol Version 4 (IPv4) and Internet Protocol Version 6 (IPv6)

    OpenAIRE

    Babatunde, Olabenjo; Al-Debagy, Omar

    2014-01-01

    Many computers and devices are becoming more connected to the internet in recent years; the use of the Internet Protocol (IP) has made the connectivity and identification of these devices possible in large scale. In this paper, we will discuss the evolution of Internet Protocol version 4 (IPv4), its features, issues and limitations and how Internet Protocol version 6 (IPv6) tends to solve some of these issues including the differences and transition between these two protocols.

  1. The comparison of CAP88-PC version 2.0 versus CAP88-PC version 1.0

    Energy Technology Data Exchange (ETDEWEB)

    Yakubovich, B.A.; Klee, K.O.; Palmer, C.R.; Spotts, P.B.

    1997-12-01

    40 CFR Part 61 (Subpart H of the NESHAP) requires DOE facilities to use approved sampling procedures, computer models, or other approved procedures when calculating Effective Dose Equivalent (EDE) values to members of the public. Currently version 1.0 of the approved computer model CAP88-PC is used to calculate EDE values. The DOE has upgraded the CAP88-PC software to version 2.0. This version provides simplified data entry, better printing characteristics, the use of a mouse, and other features. The DOE has developed and released version 2.0 for testing and comment. This new software is a WINDOWS based application that offers a new graphical user interface with new utilities for preparing and managing population and weather data, and several new decay chains. The program also allows the user to view results before printing. This document describes a test that confirmed CAP88-PC version 2.0 generates results comparable to the original version of the CAP88-PC program.

  2. Science Fiction in Social Education: Exploring Consequences of Technology

    Science.gov (United States)

    Mason, Lance E.

    2013-01-01

    An NCSS Technology Position Statement and Guidelines, published in 2006 (an updated version is published in this issue of "Social Education"), affirms that social studies students should critically examine relations between technology and society. This article describes how teachers can use science fiction to introduce critical questions…

  3. Technology Maturity is Technology Superiority

    Science.gov (United States)

    2008-09-09

    Dominant Air Power: Design For Tomorrow…Deliver Today 2 TECHNOLOGY MATURITY CONFERENCE • ONE DEFINITION OF MATURITY – GOOD JUDGEMENT COMES FROM...EXPERIENCE—EXPERIENCE COMES FROM BAD JUDGEMENT Dominant Air Power: Design For Tomorrow…Deliver Today 3 TECHNOLOGY MATURITY CONFERENCE • THIS WILL BE A...2008 TECHNOLOGY MATURITY CONFERENCE “ TECHNOLOGY MATURITY IS TECHNOLOGY SUPERIORITY” Aeronautical Systems Center Dr. Tom Christian ASC/EN, WPAFB OH

  4. SpaceCube Version 1.5

    Science.gov (United States)

    Geist, Alessandro; Lin, Michael; Flatley, Tom; Petrick, David

    2013-01-01

    SpaceCube 1.5 is a high-performance and low-power system in a compact form factor. It is a hybrid processing system consisting of CPU (central processing unit), FPGA (field-programmable gate array), and DSP (digital signal processor) processing elements. The primary processing engine is the Virtex- 5 FX100T FPGA, which has two embedded processors. The SpaceCube 1.5 System was a bridge to the SpaceCube 2.0 and SpaceCube 2.0 Mini processing systems. The SpaceCube 1.5 system was the primary avionics in the successful SMART (Small Rocket/Spacecraft Technology) Sounding Rocket mission that was launched in the summer of 2011. For SMART and similar missions, an avionics processor is required that is reconfigurable, has high processing capability, has multi-gigabit interfaces, is low power, and comes in a rugged/compact form factor. The original SpaceCube 1.0 met a number of the criteria, but did not possess the multi-gigabit interfaces that were required and is a higher-cost system. The SpaceCube 1.5 was designed with those mission requirements in mind. The SpaceCube 1.5 features one Xilinx Virtex-5 FX100T FPGA and has excellent size, weight, and power characteristics [4×4×3 in. (approx. = 10×10×8 cm), 3 lb (approx. = 1.4 kg), and 5 to 15 W depending on the application]. The estimated computing power of the two PowerPC 440s in the Virtex-5 FPGA is 1100 DMIPS each. The SpaceCube 1.5 includes two Gigabit Ethernet (1 Gbps) interfaces as well as two SATA-I/II interfaces (1.5 to 3.0 Gbps) for recording to data drives. The SpaceCube 1.5 also features DDR2 SDRAM (double data rate synchronous dynamic random access memory); 4- Gbit Flash for storing application code for the CPU, FPGA, and DSP processing elements; and a Xilinx Platform Flash XL to store FPGA configuration files or application code. The system also incorporates a 12 bit analog to digital converter with the ability to read 32 discrete analog sensor inputs. The SpaceCube 1.5 design also has a built

  5. Update of the European Landslide Susceptibility Map (ELSUS Version 2)

    Science.gov (United States)

    Wilde, Martina; Günther, Andreas; Malet, Jean-Philippe; Reichenbach, Paola; Hervás, Javier

    2015-04-01

    We present an update of the initial version of the European Landslide Susceptibility Map (ELSUS Version 1) that was released in 2012 through the EU Joint Research Centre (JRC) European Soil Data Centre (ESDAC). The susceptibility evaluation methodology employed for the updated map ELSUS Version 2 presented in this paper is identical to the previous approach, and comprises the differentiation of the analyzed European area into seven climate-physiographical model zones, the use of a reduced set of spatial susceptibility predictors (shallow subsurface lithology, slope angle, and land cover), and model zone-specific heuristic spatial multicriteria evaluations (SMCE) for susceptibility mapping. The most important improvement for ELSUS version 2 is the replacement of the original "lithology" data set consisting of soil parent material information derived from the European Soil Database (ESDB) by new information derived from the digital version of the International Hydrogeological Map of Europe at scale 1 : 1.5 Million (IHME 1500). IHME lithology describes both consolidated and unconsolidated shallow geological materials over Europe and can be shown to have a higher significance for landslide susceptibility evaluation than the soil parent material derived from ESDB. Other improvements consist in the change of the mapping unit from 1 km to 200 m grid size and the incorporation of terrains not covered by ELSUS version 1 (e.g., Iceland, the Faroers, the Shetlands, and Cyprus). Additionally, the new ELSUS version 2 was calibrated and validated with an updated pan-European landslide inventory now containing more than 155,000 landslides (30% more than used for ELSUS version 1). The enhanced and updated landslide inventory and the higher quality of the "lithology" data enabled us to establish more consistent SMCE-schemes for the individual model zones. The enhancements of ELSUS Version 2 result in an overall increase of the predictive power of the map for about 10%, as indicated

  6. Globalization & technology

    DEFF Research Database (Denmark)

    Narula, Rajneesh

    Technology and globalization are interdependent processes. Globalization has a fundamental influence on the creation and diffusion of technology, which, in turn, affects the interdependence of firms and locations. This volume examines the international aspect of this interdependence at two levels...

  7. Living Technology

    DEFF Research Database (Denmark)

    2010-01-01

    This book is aimed at anyone who is interested in learning more about living technology, whether coming from business, the government, policy centers, academia, or anywhere else. Its purpose is to help people to learn what living technology is, what it might develop into, and how it might impact...... our lives. The phrase 'living technology' was coined to refer to technology that is alive as well as technology that is useful because it shares the fundamental properties of living systems. In particular, the invention of this phrase was called for to describe the trend of our technology becoming...... increasingly life-like or literally alive. Still, the phrase has different interpretations depending on how one views what life is. This book presents nineteen perspectives on living technology. Taken together, the interviews convey the collective wisdom on living technology's power and promise, as well as its...

  8. Living Technology

    DEFF Research Database (Denmark)

    2010-01-01

    This book is aimed at anyone who is interested in learning more about living technology, whether coming from business, the government, policy centers, academia, or anywhere else. Its purpose is to help people to learn what living technology is, what it might develop into, and how it might impact...... our lives. The phrase 'living technology' was coined to refer to technology that is alive as well as technology that is useful because it shares the fundamental properties of living systems. In particular, the invention of this phrase was called for to describe the trend of our technology becoming...... increasingly life-like or literally alive. Still, the phrase has different interpretations depending on how one views what life is. This book presents nineteen perspectives on living technology. Taken together, the interviews convey the collective wisdom on living technology's power and promise, as well as its...

  9. Elaboration of reduced versions of Measurement tools: A practical Perspective

    Directory of Open Access Journals (Sweden)

    Nekane Balluerka

    2012-01-01

    Full Text Available The aim of the present study is to show, from a practical perspective, the guidelines that may be followed to create a reduced version of a measurement tool. Therefore, it describes in detail the process of creating the reduced Basque version of the CDS scale (Children's Depression Scale; Lang and Tisher, 1978, which measures depression in children and adolescents. In a first study, the items that make up the reduced version of the CDS (CDS-R are selected from a set of analysis conducted on a sample of 886 children and adolescents who were administered the extensive version of the CDS adapted to the Basque language (Balluerka, Gorostiaga, and Haranburu, 2012. Subsequently, the CDS-R is validated on a sample of 2,165 participants. This second study examines the factorial structure, the internal consistency and the temporal stability of the instrument, as well as the relationship between its dimensions and gender, academic performance, emotional intelligence and attachment. Thus, evidence is obtained on the reliability and validity of the reduced version of the instrument, which guarantees suitable evaluation of the construct the instrument is intended to measure.

  10. Itil version 3 at a glance information quick reference

    CERN Document Server

    Long, John

    2008-01-01

    ITILA(R) Version 3 At a Glance takes a graphical approach to consolidating the information of ITILA(R) version 3. ITILA(R) is an internationally-recognized set of best practices for providing IT service management. IT organizations worldwide are implementing ITILA(R) as a vehicle for improving IT service quality and improve return on investment for IT services. The desk referencea (TM)s unique graphical approach will take otherwise complex textual descriptions and make the information accessible in a series of consistent, simple diagrams. ITILA(R) Version 3 At a Glance will be of interest to organizations looking to train their staffs in a consistent and cost-effective way. Further, this book is ideal for anyone involved in planning consulting, implementing, or testing an ITILA(R) Version 3 implementation. Each chapter in ITILA(R) Version 3 at a Glance summarizes one of the ITILA(R) v3 books in the following consistent structure: - Brief Description of the Stage - Overview Diagram of the Stage - Key Concepts ...

  11. Validation of the Italian version of the HSE Indicator Tool.

    Science.gov (United States)

    Magnavita, N

    2012-06-01

    An Italian version of the Health & Safety Executive's (HSE) Management Standards Revised Indicator Tool (MS-RIT) has been used to monitor the working conditions that may lead to stress. To initially examine the factor structure of the Italian version of the MS-RIT, in comparison with the original UK tool, and to investigate its validity and reliability; second, to study the association between occupational stress and psychological distress. Workers from 17 companies self-completed the MS-RIT and the General Health Questionnaire used to measure the psychological distress while they waited for their periodic examination at the workplace. Factor analysis was employed to ascertain whether the Italian version maintained the original subdivision into seven scales. Odds ratios were calculated to estimate the risk of impairment associated with exposure to stress at the workplace. In total, 748 workers participated; the response rate was 91%. The factor structure of the Italian MS-RIT corresponded partially to the original UK version. The 'demand', 'control', 'role', ' relationship' and 'colleague-support' scales were equivalent to the UK ones. A principal factor, termed ' elasticity', incorporated the UK 'management-support' and 'change' scales. Reliability analysis of the sub-scales revealed Cronbach's alpha values ranging from 0.75 to 0.86. Our findings confirmed the usefulness of the Italian version of the HSE MS-RIT in stress control.

  12. Emerging Technologies

    OpenAIRE

    Salgar, S. M.

    2004-01-01

    Phenomenal advancements have taken place in the field of Information and communication technologies in the last decade. Spectacular and innovative changes are expected to take place in these fields in coming decade. Networking technologies are going through a sea change. This paper enumerates the likely networking technologies which are emerging, particularly WLANs. Most of the personal communication in the country will be through cellular/ mobile technologies, which are also covered in the p...

  13. Soulful Technologies

    DEFF Research Database (Denmark)

    Fausing, Bent

    2010-01-01

    or anthropomorphism is important for the branding of new technology. Technology is seen as creating a techno-transcendence towards a more qualified humanity which is in contact with fundamental human values like intuition, vision, and sensing; all the qualities that technology, industrialization, and rationalization...

  14. Technology Tiers

    DEFF Research Database (Denmark)

    Karlsson, Christer

    2015-01-01

    A technology tier is a level in a product system: final product, system, subsystem, component, or part. As a concept, it contrasts traditional “vertical” special technologies (for example, mechanics and electronics) and focuses “horizontal” feature technologies such as product characteristics...

  15. Technology Tiers

    DEFF Research Database (Denmark)

    Karlsson, Christer

    2015-01-01

    A technology tier is a level in a product system: final product, system, subsystem, component, or part. As a concept, it contrasts traditional “vertical” special technologies (for example, mechanics and electronics) and focuses “horizontal” feature technologies such as product characteristics...

  16. Assistive Technologies

    Science.gov (United States)

    Auat Cheein, Fernando A., Ed.

    2012-01-01

    This book offers the reader new achievements within the Assistive Technology field made by worldwide experts, covering aspects such as assistive technology focused on teaching and education, mobility, communication and social interactivity, among others. Each chapter included in this book covers one particular aspect of Assistive Technology that…

  17. DF-224 Version 7.3 FS Installation

    Science.gov (United States)

    Boyce, Leslye

    1990-12-01

    Version 7.3 will implement a three logical memory unit contingency plan. It removes under utilized DF-224 code to recover memory margins and restructures code. The installation of DF-224, version 7.3 will be broken into a Installation, Regression test, and Contingency Back-out time. In addition, it eliminates the 10 and 300 second processing rate. It is highly desirable to implement the version of the flight software ASAP. Due to the complexity of the installation, dedicated spacecraft time is required to minimize spacecraft risk In summary, this proposal requests 14 orbits of dedicated spacecraft time for installation, regression test, and contingency back_out time for DF-224 FS V7.3 to be scheduled in the first few days of SMS 054.

  18. MR evaluation of femoral neck version and tibial torsion

    Energy Technology Data Exchange (ETDEWEB)

    Koenig, James Karl; Dwek, Jerry R. [University of California, San Diego, Children' s Hospital and Health Center, Department of Radiology, San Diego, CA (United States); Pring, Maya E. [Rady Children' s Hospital, Department of Pediatric Orthopedic Surgery, San Diego, CA (United States)

    2012-01-15

    Abnormalities of femoral neck version have been associated with a number of hip abnormalities in children, including slipped capital femoral epiphysis, proximal femoral focal deficiency, coxa vara, a deep acetabulum and, rarely, developmental dysplasia of the hip. Orthopedic surgeons also are interested in quantifying the femoral neck anteversion or retroversion in children especially to plan derotational osteotomies. Historically, the angle of femoral version and tibial torsion has been measured with the use of radiography and later by CT. Both methods carry with them the risks associated with ionizing radiation. Techniques that utilize MR are used less often because of the associated lengthy imaging times. This article describes a technique using MRI to determine femoral neck version and tibial torsion with total scan times of approximately 10 min. (orig.)

  19. Correction, improvement and model verification of CARE 3, version 3

    Science.gov (United States)

    Rose, D. M.; Manke, J. W.; Altschul, R. E.; Nelson, D. L.

    1987-01-01

    An independent verification of the CARE 3 mathematical model and computer code was conducted and reported in NASA Contractor Report 166096, Review and Verification of CARE 3 Mathematical Model and Code: Interim Report. The study uncovered some implementation errors that were corrected and are reported in this document. The corrected CARE 3 program is called version 4. Thus the document, correction. improvement, and model verification of CARE 3, version 3 was written in April 1984. It is being published now as it has been determined to contain a more accurate representation of CARE 3 than the preceding document of April 1983. This edition supercedes NASA-CR-166122 entitled, 'Correction and Improvement of CARE 3,' version 3, April 1983.

  20. [Validation of the Spanish version of the Severe Impairment Battery].

    Science.gov (United States)

    Llinàs Reglá, J; Lozano Gallego, M; López, O L; Gudayol Portabella, M; López-Pousa, S; Vilalta Franch, J; Saxton, J

    1995-01-01

    We examine the cognitive ability of 58 demented patients who were evaluated with the Spanish version of the Severe Impairment Battery (SIB). The SIB is composed of multiple simple subtests for memory, language, orientation, attention, visual perception and ability to construct. The battery also assesses social skills, praxis and the ability to respond appropriately to name. The mean SIB scores (72.55 +/- 17.99; range 8-99) correlated with mean scores (10.76 +/- 6.41; range 0-31) on the Spanish version of Folstein's Mini-Mental State Examination (MMSE). The SIB detected deterioration in the nine cognitive areas examined, even in the most severely impaired patients (MMSE = 0-6). These results indicate that the Spanish version of the SIB is a useful instrument for examining severely demented patients.

  1. Update on external cephalic version performed at term.

    Science.gov (United States)

    Stine, L E; Phelan, J P; Wallace, R; Eglinton, G S; van Dorsten, J P; Schifrin, B S

    1985-05-01

    External cephalic version under tocolysis at term was investigated during a prospective study at the Los Angeles County/University of Southern California Medical Center from October 1, 1979 to March 16, 1983. Two hundred twelve patients were considered for attempted version. Forty-one patients were excluded, and 23 patients as previously reported were randomized to the control group. The procedure was successful in 73% (108 of 148). Of the 102 successful versions observed until delivery (six lost to follow-up), 93% (95 of 102) presented in labor with a vertex presentation; seven fetuses reverted to abnormal lies. The cesarean section rate in the success group with a vertex presentation was 24% (23 of 95).

  2. Trigonometric version of quantum-classical duality in integrable systems

    CERN Document Server

    Beketov, M; Zabrodin, A; Zotov, A

    2015-01-01

    We extend the quantum-classical duality to the trigonometric (hyperbolic) case. The duality establishes an explicit relationship between the classical N-body trigonometric Ruijsenaars-Schneider model and the inhomogeneous twisted XXZ spin chain on N sites. Similarly to the rational version, the spin chain data fixes a certain Lagrangian submanifold in the phase space of the classical integrable system. The inhomogeneity parameters are equal to the coordinates of particles while the velocities of classical particles are proportional to the eigenvalues of the spin chain Hamiltonians (residues of the properly normalized transfer matrix). In the rational version of the duality, the action variables of the Ruijsenaars-Schneider model are equal to the twist parameters with some multiplicities defined by quantum (occupation) numbers. In contrast to the rational version, in the trigonometric case there is a splitting of the spectrum of action variables (eigenvalues of the classical Lax matrix). The limit correspondin...

  3. The Revised Version of Class I Methanol Maser Catalog

    CERN Document Server

    Val'tts, I E; Bayandina, O S

    2010-01-01

    The revised version of the class I methanol maser catalog is presented. It contains 182 sources - new class I methanol masers detected in the direction of EGOs were added to the previous number (~160 sources have been published in the first version of this catalog - see reference in the text). Electronic version has been generated in the form of html file - http://www.asc.rssi.ru/MMI. A statistical analysis was carried out within 2' around a maser position to find an identification of class I methanol masers with any objects typical for star-forming regions - UCHII regions, IRAS sources, bipolar outflows, CS lines as of dense gas tracer, masers (class II methanol masers, OH and H2O) and EGO. None of the bipolar outflow, already registered in the direction of class I methanol maser, did not coincide with EGO. The result is submitted in a form of a diagram.

  4. An Open Platform for Processing IFC Model Versions

    Institute of Scientific and Technical Information of China (English)

    Mohamed Nour; Karl Beucke

    2008-01-01

    The IFC initiative from the International Alliance of Interoperability has been developing since the mid-nineties through several versions.This paper addresses the problem of binding the growing number of IFC versions and their EXPRESS definitions to programming environments (Java and.NET).The solution developed in this paper automates the process of generating early binding classes,whenever a new version of the IFC model is released.Furthermore, a runtime instantiation of the generated eady binding classes takes place by importing IFC-STEP ISO 10303-P21 models.The user can navigate the IFC STEP model with relevance to the defining EXPRESS-schema,modify,deletem,and create new instances.These func-tionalities are considered to be a basis for any IFC based implementation.It enables researchers to experi-ment the IFC model independently from any software application.

  5. The uncertainty principle - A simplified review of the four versions

    Science.gov (United States)

    Jijnasu, Vasudeva

    2016-08-01

    The complexity of the historical confusions around different versions of the uncertainty principle, in addition to the increasing technicality of physics in general, has made its affairs predominantly accessible only to specialists. Consequently, the clarity that has dawned upon physicists over the decades regarding quantum uncertainty remains mostly imperceptible for general readers, students, philosophers and even non-expert scientists. In an attempt to weaken this barrier, the article presents a summary of this technical subject, focussing at the prime case of the position-momentum pair, as modestly and informatively as possible. This includes a crisp analysis of the historical as well as of the latest developments. In the process the article provides arguments to show that the usually sidelined version of uncertainty-the intrinsic 'unsharpness' or 'indeterminacy'-forms the basis for all the other three versions, and subsequently presents its hard philosophical implications.

  6. [Development of a Japanese version of the TALE scale].

    Science.gov (United States)

    Ochiai, Tsutomu; Oguchi, Takashi

    2013-12-01

    The Thinking About Life Experiences (TALE) Scale (Bluck & Alea, 2011) has three subscales that assess the self, social, and directive functions of autobiographical memory. This study constructs a Japanese version of the TALE Scale and examines its reliability and validity. Fifteen items that assess the three functions of autobiographical memory were translated into Japanese. We conducted an online investigation with 600 men and women between 20-59 years of age. In Study 1, exploratory and confirmatory factor analysis identified that the three-factor structure of the Japanese version of the TALE Scale was the same as the original TALE Scale. Sufficient internal consistency of the scale was found, and the construct validity of the scale was supported by correlation analysis. Study 2 confirmed that the test-retest reliabilities of the three subscales were sufficient. Thus, this Japanese version of the TALE Scale is useful to assess autobiographical memory functions in Japan.

  7. Versiones y traducciones de los cuentos de los hermanos Grimm

    OpenAIRE

    Moya Herrera, Sergio

    2015-01-01

    Versiones y traducciones de los cuentos de los hermanos Grimm es un trabajo que pretende investigar el trasfondo de los cuentos de los hermanos Grimm, «Blancanieves», «Cenicienta», «Rapunzel» y «Hansel y Gretel», para entender qué esconden las narraciones. El trabajo incluye un análisis comparativo de dos versiones en alemán de los cuentos, la primera y la última, y también un estudio de dos traducciones al español para conocer cómo se tradujeron varios elementos culturales, nombres de person...

  8. Comparing Danish and Swedish versions of PISA scientific literacy

    DEFF Research Database (Denmark)

    Serder, Malmø University, Margareta; Sørensen, Helene

    This paper presents a comparison between the Swedish, Danish, English, and French versions of three scientific literacy test-units from the released PISA items 2006. More specifically it compares how different words and concepts have been translated in the Swedish and Danish tests, compared...... with these three PISA units. In the paper we claim that in spite of detailed and strongly controlled methods for achieving translations of high standard used by the PISA, important and perhaps even decisive, differences between the four versions exist....

  9. Danish version of 'The COPD self-efficacy scale'

    DEFF Research Database (Denmark)

    Emme, Christina; Mortensen, Erik L; Rydahl-Hansen, Susan

    2012-01-01

    Scand J Caring Sci; 2012; 26; 615-623 Danish version of 'The COPD self-efficacy scale': translation and psychometric properties The aim of the study was to translate 'The COPD self-efficacy scale' (CSES) into Danish and to evaluate the psychometric properties of the Danish version (CSES-DK). CSES...... enables assessment of self-efficacy in individuals with chronic obstructive pulmonary disease (COPD). The scale consists of 34 items, describing situations which may cause dyspnoea in patients with COPD. The CSES was translated into Danish using a standard forward-backward translation procedure...

  10. Development of the unified version of COBRA/RELAP5

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, J. J.; Ha, K. S.; Chung, B. D.; Lee, W. J.; Sim, S. K. [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1997-12-31

    The COBRA/RELAP5 code, an integrated version of the COBRA-TF and RELAP5/MOD3 codes, has been developed for the realistic simulations of complicated, multi-dimensional, two-phase, thermal-hydraulic system transients in light water reactors. Recently, KAERI developed an unified version of the COBRA/RELAP5 code, which can run in serial mode on both workstations and personal computers. This paper provides the brief overview of the code integration scheme, the recent code modifications, the developmental assessments, and the future development plan. 13 refs., 5 figs., 2 tabs. (Author)

  11. SAGE Version 7.0 Algorithm: Application to SAGE II

    Science.gov (United States)

    Damadeo, R. P; Zawodny, J. M.; Thomason, L. W.; Iyer, N.

    2013-01-01

    This paper details the Stratospheric Aerosol and Gas Experiments (SAGE) version 7.0 algorithm and how it is applied to SAGE II. Changes made between the previous (v6.2) and current (v7.0) versions are described and their impacts on the data products explained for both coincident event comparisons and time-series analysis. Users of the data will notice a general improvement in all of the SAGE II data products, which are now in better agreement with more modern data sets (e.g. SAGE III) and more robust for use with trend studies.

  12. Tinnitus functional index: validation of the German version for Switzerland.

    Science.gov (United States)

    Peter, Nicole; Kleinjung, Tobias; Jeker, Raphael; Meyer, Martin; Klaghofer, Richard; Weidt, Steffi

    2017-05-05

    Different standardized questionnaires are used to assess tinnitus severity, making comparisons across studies difficult. These questionnaires are also used to measure treatment-related changes in tinnitus although they were not designed for this purpose. To solve these problems, a new questionnaire - the Tinnitus Functional Index (TFI) - has been established. The TFI is highly responsive to treatment-related change and promises to be the new gold standard in tinnitus evaluation. The aim of the current study was to validate a German version of the TFI for a German-speaking population in Switzerland. At the ENT department of the University Hospital Zurich, 264 subjects completed an online survey including the German version for Switzerland of TFI, Tinnitus Handicap Inventory (THI), Beck Depression Inventory (BDI), Beck Anxiety Inventory (BAI) and sociodemographic variables. Internal consistency of the TFI was calculated with Cronbach's alpha coefficient. Pearson correlation coefficients were used for the test-retest reliability of the TFI and to investigate convergent and discriminant validity between the THI and the BDI and BAI, respectively. Factor analysis was assessed using a principal component analysis with oblique rotation. The different factors extracted were then compared with the original questionnaire. The German version of the TFI for Switzerland showed an excellent internal consistency (Cronbach's alpha of 0.97) and an excellent test-retest reliability of 0.91. The convergent validity with THI was high (r = 0.86). The discriminant validity with BAI and BDI showed moderate results (BAI: r = 0.60 and BDI: r = 0.65). In the factor analysis only five factors with one main factor could be extracted instead of eight factors as described in the original version. Nevertheless, relations to the original eight subscales could be demonstrated. The German version of the TFI for Switzerland is a suitable instrument for measuring the impact of tinnitus

  13. Comparing Danish and Swedish versions of PISA scientific literacy

    DEFF Research Database (Denmark)

    Serder, Malmø University, Margareta; Sørensen, Helene

    This paper presents a comparison between the Swedish, Danish, English, and French versions of three scientific literacy test-units from the released PISA items 2006. More specifically it compares how different words and concepts have been translated in the Swedish and Danish tests, compared...... to the English and French original versions. Differences that occur as a result of the translation process concerning words’ meaning are demonstrated. The possible consequences of such differences are exemplified by an excerpt from a situation in which Swedish 15-year-old students collaboratively worked...

  14. Versiones y traducciones de los cuentos de los hermanos Grimm

    OpenAIRE

    Moya Herrera, Sergio

    2015-01-01

    Versiones y traducciones de los cuentos de los hermanos Grimm es un trabajo que pretende investigar el trasfondo de los cuentos de los hermanos Grimm, «Blancanieves», «Cenicienta», «Rapunzel» y «Hansel y Gretel», para entender qué esconden las narraciones. El trabajo incluye un análisis comparativo de dos versiones en alemán de los cuentos, la primera y la última, y también un estudio de dos traducciones al español para conocer cómo se tradujeron varios elementos culturales, nombres de person...

  15. Sensemaking technologies

    DEFF Research Database (Denmark)

    Madsen, Charlotte Øland

    Research scope: The scope of the project is to study technological implementation processes by using Weick's sensemaking concept (Weick, 1995). The purpose of using a social constructivist approach to investigate technological implementation processes is to find out how new technologies transform......, Orlikowski 2000). Viewing the use of technology as a process of enactment opens up for investigating the social processes of interpreting new technology into the organisation (Orlikowski 2000). The scope of the PhD project will therefore be to gain a deeper understanding of how the enactment of new...... & Brass, 1990; Kling 1991; Orlikowski 2000). It also demonstrates that technology is a flexible variable adapted to the organisation's needs, culture, climate and management philosophy, thus leading to different uses and outcomes of the same technology in different organisations (Barley 1986; 1990...

  16. Appropriate Technology as Indian Technology.

    Science.gov (United States)

    Barry, Tom

    1979-01-01

    Describes the mounting enthusiasm of Indian communities for appropriate technology as an inexpensive means of providing much needed energy and job opportunities. Describes the development of several appropriate technology projects, and the goals and activities of groups involved in utilizing low scale solar technology for economic development on…

  17. Generic Protocol for the Verification of Ballast Water Treatment Technology. Version 5.1

    Science.gov (United States)

    2010-09-01

    Core Parameters: The measurements that are required as part of the ETV verification. Cyst: The dormant cell or resting stage of microalgae ...105 organisms/m3 Protists Tetraselmis sp. Green microalgae 103 organisms/mL Bacteria Geobacillus sp. Geobacillus sp. 103 organisms/mL 1 The volumes...observation periods. Within this size class fall dormant cells or resting stages exhibited across a broad phylogenetic range of microalgae

  18. DARWARS Developers’ Guide: A BBN Technologies Document, Version 3.0

    Science.gov (United States)

    2007-11-02

    password, nickname, email, user clases , pending roles and objective assignments. These are explained in more detail below. The user class is one...Unlike Proficiency, exposure is largely experiential; users learn implicitly through exposure to varied events. Knowledge Information or facts...Objective What a person would want to learn within DARWARS, and what a training system is able to teach . An objective can have sub-objectives. It is

  19. Detailed Analysis of Alternatives Report. Version 2.0. Technology Descriptions. Volume 7.

    Science.gov (United States)

    1993-07-01

    diisopropylmethyl phosphorate DNAPL dense nonaqueous phase liquid DOD Department of Defense xl RMA/0670 7/15/93 12:50 dj DAA Acronym List DOT...HDPE high-density polyethylene HE high explosive HEP habitat evaluation protocol HEPA high efficiency particulate HF hydrofluoric acid Hg mercury ...of the selected operating temperature. For example, at the higher range of thermal desorption temperatures, mercury is almost entirely volatilized and

  20. Aircraft noise prediction program propeller analysis system IBM-PC version user's manual version 2.0

    Science.gov (United States)

    Nolan, Sandra K.

    1988-01-01

    The IBM-PC version of the Aircraft Noise Prediction Program (ANOPP) Propeller Analysis System (PAS) is a set of computational programs for predicting the aerodynamics, performance, and noise of propellers. The ANOPP-PAS is a subset of a larger version of ANOPP which can be executed on CDC or VAX computers. This manual provides a description of the IBM-PC version of the ANOPP-PAS and its prediction capabilities, and instructions on how to use the system on an IBM-XT or IBM-AT personal computer. Sections within the manual document installation, system design, ANOPP-PAS usage, data entry preprocessors, and ANOPP-PAS functional modules and procedures. Appendices to the manual include a glossary of ANOPP terms and information on error diagnostics and recovery techniques.

  1. Stress Reactivity to an Electronic Version of the Trier Social Stress Test: A Pilot Study

    Directory of Open Access Journals (Sweden)

    Sage E Hawn

    2015-05-01

    Full Text Available Social stressors that rely on the inclusion of confederates (i.e., Trier Social Stress Test; TSST are often used in clinical laboratory research paradigms to elicit a measurable stress response in participants. Although effective, the TSST is labor intensive and may introduce error variance as a function of confederate race, gender, and/or response characteristics. The present study aimed to develop and validate an electronic version of the TSST (e-TSST. The primary aim was to compare the e-TSST to an e-neutral control condition; the exploratory aim was to compare the magnitude of stress response elicited by the e-TSST to that elicited by the traditional TSST. Forty-three healthy adults were randomized to the e-TSST or e-neutral condition. Subjective (participant-rated distress and objective (cortisol, heart rate and blood pressure indices of stress were collected prior to, and multiple times following, the stressor. Using archival data collected from 19 healthy participants exposed to the traditional TSST in a prior study, stress reactivity was compared between the electronic and traditional versions of the TSST. The e-TSST elicited significant increases in all measures of stress reactivity compared to the e-neutral condition, with the exception of heart rate (HR. Results showed that the magnitude of subjective distress, BP, and HR responses elicited by the e-TSST did not differ significantly from that elicited by the traditional TSST. The traditional TSST elicited significantly higher cortisol than the e-TSST. Although these findings provide initial support for the development of electronic versions of the TSST, further refinement of the e-TSST is warranted prior to broad adoption of this technology. A refined, reliable e-TSST could allow for increased utilization of the TSST by enhancing convenience, reducing labor costs, and limiting potential error variance introduced by human confederates.

  2. Understanding technology adoption through individual and context characteristics: the case of HDTV

    NARCIS (Netherlands)

    Baaren, Eva; Wijngaert, van de Lidwien; Huizer, Erik

    2011-01-01

    Technology adoption research has a tradition of using and improving Davis' (1989) “Technology Acceptance Model” (TAM) and extended versions of it. This article suggests a break with this tradition by showing that the TAM is limited in its understanding of technology adoption. Two alternative approac

  3. HTGR Fuel Technology Program. Semiannual report for the period ending March 31, 1983

    Energy Technology Data Exchange (ETDEWEB)

    1983-07-01

    This document reports the technical accomplishments of the HTGR Fuel Technology Program at GA Technologies Inc. during the first half of FY 83. The activities include the fuel process, fuel materials, fuel cycle, fission product transport, core component verification, and core technology transfer tasks necessary to support the design and development of a steam cycle/cogeneration (SC/C) version of the HTGR.

  4. An Internet Version of the Diagnostic Interview Schedule for Children (DISC-IV) : Correspondence of the ADHD Section With the Paper-and-Pencil Version

    NARCIS (Netherlands)

    Steenhuis, Mark-Peter; Serra, Marike; Minderaa, Rudolf Boudewijn; Hartman, Catharina Annette

    2009-01-01

    The authors recently developed an Internet version of the Diagnostic Interview Schedule for Children-Version 4 (DISC-IV), parent version (D. Shaffer, P. Fisher, C. P. Lucas, M. K. Dulcan, & M. E. Schwab-Stone, 2000), with the main purpose of using it at home without an interviewer. This offers many

  5. International versions of the Menopause Rating Scale (MRS

    Directory of Open Access Journals (Sweden)

    Schneider Hermann PG

    2003-07-01

    Full Text Available Abstract Background Symptom scales for aging women have clinically been used for years and the interest in measuring health-related quality of life (HRQoL has increased in recent years. The Menopause Rating Scale (MRS is a formally validated scale according to the requirements for quality of life instruments. The aim of this paper is to review the current state of the instrument particularly concerning versions of the scale in different languages. MRS versions available The translations were performed following international methodological recommendations for the linguistic & cultural adaptation of HRQoL instruments. The first translation was done from the German original scale into English (UK & USA. The English version was used as the source language for the translations into French, Spanish, Swedish, Mexican/Argentine, Brazilian, Turkish, and Indonesian languages (attached as additional PDF files. Conclusion The MRS scale is obviously a valuable tool for assessing health related quality of life of women in the menopausal transition and is used worldwide. The currently available 9 language versions have been translated following international standards for the linguistic and cultural translation of quality of life scales. Assistance is offered to help interested parties in the translation process.

  6. A Quantum Version of Wigner's Transition State Theory

    NARCIS (Netherlands)

    Schubert, R.; Waalkens, H.; Wiggins, S.

    2009-01-01

    A quantum version of a recent realization of Wigner's transition state theory in phase space is presented. The theory developed builds on a quantum normal form which locally decouples the quantum dynamics near the transition state to any desired order in (h) over bar. This leads to an explicit algor

  7. A Quantum Version of Wigner’s Transition State Theory

    NARCIS (Netherlands)

    Schubert, R.; Waalkens, H.; Wiggins, S.

    2009-01-01

    A quantum version of a recent realization of Wigner’s transition state theory in phase space is presented. The theory developed builds on a quantum normal form which locally decouples the quantum dynamics near the transition state to any desired order in ħ. This leads to an explicit algorithm to com

  8. GOES Surface and Insolation Products (GSIP), Version 2

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Version 2 of the GOES Surface and Insolation Products (GSIP) is a high spatial resolution (1/8 x 1/8 degrees) solar radiation product estimated from the GOES-East...

  9. GENII Version 2 Software Design Document, PNNL-14584, Revision 3

    Energy Technology Data Exchange (ETDEWEB)

    Napier, B. A. [US Environmental Protection Agency (EPA), Washington, DC (United States); Strenge, D. L. [US Environmental Protection Agency (EPA), Washington, DC (United States); Ramsdell, Jr., J. V. [US Environmental Protection Agency (EPA), Washington, DC (United States); Eslinger, P. W. [US Environmental Protection Agency (EPA), Washington, DC (United States); Fosmire, C. [US Environmental Protection Agency (EPA), Washington, DC (United States)

    2009-12-01

    This report describes the mathematical formulations and implementation structure for version 2 of the GENII software product (GENII-V2). The following sections define the purpose and scope of this report, the framework operating structure for GENII-V2, and definitions and acronyms used in this report.

  10. Fraudulent Versions of Botox Found in the United States

    Science.gov (United States)

    ... to U.S. medical practices. The outer carton is counterfeit, while the vial inside is labeled as a foreign version of Botox, which is not FDA-approved for sale in the United States. These products are being sold by unlicensed suppliers who are ...

  11. Accuracy of the Danish version of the 'distress thermometer'

    DEFF Research Database (Denmark)

    Bidstrup, Pernille Envold; Mertz, Birgitte; Dalton, Susanne Oksbjerg

    2012-01-01

    Objective: Short screening instruments have been suggested to improve the detection of psychological symptoms. We examined the accuracy of the Danish version of the 'Distress Thermometer'. Methods: Between October 2008 and October 2009, 426 women with newly diagnosed primary breast cancer who wer...... © 2011 John Wiley & Sons, Ltd....

  12. Rock Visualization System. Technical description (RVS version 3.8)

    Energy Technology Data Exchange (ETDEWEB)

    Curtis, P.; Elfstroem, M.; Markstroem, I. [Golder Associates AB (Sweden)

    2007-06-15

    The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. The report describes RVS version 4.0. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples. Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carry out a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system.

  13. Rock Visualization System. Technical description (RVS version 3.8)

    Energy Technology Data Exchange (ETDEWEB)

    Curtis, P.; Elfstroem, M.; Markstroem, I. [FB Engineering, Goeteborg (Sweden)

    2005-04-01

    The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. The report describes RVS version 3.8. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples. Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carryout a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system.

  14. DEMAID - A DESIGN MANAGER'S AID FOR INTELLIGENT DECOMPOSITION (MACINTOSH VERSION)

    Science.gov (United States)

    Rogers, J. L.

    1994-01-01

    effects of an output with respect to a change in a particular input. The second method traces backward to determine what modules must be re-executed if the output of a module must be recomputed. DeMAID is available in three machine versions: a Macintosh version which is written in Symantec's Think C 3.01, a Sun version, and an SGI IRIS version, both of which are written in C language. The Macintosh version requires system software 6.0.2 or later and CLIPS 4.3. The source code for the Macintosh version will not compile under version 4.0 of Think C; however, a sample executable is provided on the distribution media. QuickDraw is required for plotting. The Sun version requires GKS 4.1 graphics libraries, OpenWindows 3, and CLIPS 4.3. The SGI IRIS version requires CLIPS 4.3. Since DeMAID is not compatible with CLIPS 5.0 or later, the source code for CLIPS 4.3 is included on the distribution media; however, the documentation for CLIPS 4.3 is not included in the documentation package for DeMAID. It is available from COSMIC separately as the documentation for MSC-21208. The standard distribution medium for the Macintosh version of DeMAID is a set of four 3.5 inch 800K Macintosh format diskettes. The standard distribution medium for the Sun version of DeMAID is a .25 inch streaming magnetic tape cartridge (QIC-24) in UNIX tar format. The standard distribution medium for the IRIS version is a .25 inch IRIX compatible streaming magnetic tape cartridge in UNIX tar format. All versions include sample input. DeMAID was originally developed for use on VAX VMS computers in 1989. The Macintosh version of DeMAID was released in 1991 and updated in 1992. The Sun version of DeMAID was released in 1992 and updated in 1993. The SGI IRIS version was released in 1993.

  15. DEMAID - A DESIGN MANAGER'S AID FOR INTELLIGENT DECOMPOSITION (SUN VERSION)

    Science.gov (United States)

    Rogers, J. L.

    1994-01-01

    effects of an output with respect to a change in a particular input. The second method traces backward to determine what modules must be re-executed if the output of a module must be recomputed. DeMAID is available in three machine versions: a Macintosh version which is written in Symantec's Think C 3.01, a Sun version, and an SGI IRIS version, both of which are written in C language. The Macintosh version requires system software 6.0.2 or later and CLIPS 4.3. The source code for the Macintosh version will not compile under version 4.0 of Think C; however, a sample executable is provided on the distribution media. QuickDraw is required for plotting. The Sun version requires GKS 4.1 graphics libraries, OpenWindows 3, and CLIPS 4.3. The SGI IRIS version requires CLIPS 4.3. Since DeMAID is not compatible with CLIPS 5.0 or later, the source code for CLIPS 4.3 is included on the distribution media; however, the documentation for CLIPS 4.3 is not included in the documentation package for DeMAID. It is available from COSMIC separately as the documentation for MSC-21208. The standard distribution medium for the Macintosh version of DeMAID is a set of four 3.5 inch 800K Macintosh format diskettes. The standard distribution medium for the Sun version of DeMAID is a .25 inch streaming magnetic tape cartridge (QIC-24) in UNIX tar format. The standard distribution medium for the IRIS version is a .25 inch IRIX compatible streaming magnetic tape cartridge in UNIX tar format. All versions include sample input. DeMAID was originally developed for use on VAX VMS computers in 1989. The Macintosh version of DeMAID was released in 1991 and updated in 1992. The Sun version of DeMAID was released in 1992 and updated in 1993. The SGI IRIS version was released in 1993.

  16. Africa Soil Profiles Database, Version 1.0

    NARCIS (Netherlands)

    Leenaars, J.G.B.

    2014-01-01

    The Africa Soil Profiles Database, Version 1.0, was compiled by ISRIC - World Soil Information as a project activity for the Globally integrated- Africa Soil Information Service (AfSIS) project (www.africasoils.net/data/legacyprofile). The Africa Soil Profiles Database is a compilation of georeferen

  17. A parametrised version of Moser's modifying terms theorem

    NARCIS (Netherlands)

    Wagener, F.

    2009-01-01

    A sharpened version of Moser's `modifying terms' KAM theorem is derived, and it is shown how this theorem can be used to investigate the persistence of invariant tori in general situations, including those where some of the Floquet exponents of the invariant torus may vanish. The result is `structur

  18. A parametrised version of Moser's modifying terms theorem

    NARCIS (Netherlands)

    Wagener, F.

    2010-01-01

    A sharpened version of Moser's 'modifying terms' KAM theorem is derived, and it is shown how this theorem can be used to investigate the persistence of invariant tori in general situations, including those where some of the Floquet exponents of the invariant torus may vanish. The result is 'structur

  19. 150--9 Dec 2009.indd [Final version].indd

    African Journals Online (AJOL)

    2009-12-09

    Dec 9, 2009 ... version of the tales in a children's Bible is analysed to show in what way violence serves as ... connected in many cases to the holiness of God (Snyman 2007:69). ..... Daniel continued to pray by kneeling at a window facing.

  20. MULTIPLE PROJECTIONS SYSTEM (MPS) - USER'S MANUAL VERSION 1.0

    Science.gov (United States)

    The report is a user's manual for version 1.0 of the Multiple Projections Systems (MPS), a computer system that can perform "what if" scenario analysis and report the final results (i.e., Rate of Further Progress - ROP - inventories) to EPA (i.e., the Aerometric Information Retri...

  1. MULTIPLE PROJECTIONS SYSTEM (MPS): USER'S MANUAL VERSION 2.0

    Science.gov (United States)

    The document is a user's manual for Multiple Projections System (MPS) Version 2.0, based on the 3% reasonable further progress (RFP) tracking system that was developed in FY92/FY93. The 3% RFP tracking system is a Windows application, and enhancements to convert the 3% RFP track...

  2. Psychometric Evaluation of the Simplified Chinese Version of Flourishing Scale

    Science.gov (United States)

    Tang, Xiaoqing; Duan, Wenjie; Wang, Zhizhang; Liu, Tianyuan

    2016-01-01

    Objectives: The Flourishing Scale (FS) was developed to measure psychological well-being from the eudaimonic perspective, highlighting the flourishing of human functioning. This article evaluated the psychometric characteristics of the simplified Chinese version of FS among a Chinese community population. Method: A total of 433 participants from…

  3. Transformation or Transformism: Engestrom's Version of Activity Theory?

    Science.gov (United States)

    Avis, James

    2009-01-01

    The paper examines Engestrom's version of activity theory. It seeks to locate this within the socio-economic and theoretical context in which notions of co-configuration and knotworking are set. Although this theoretical approach offers radical possibilities it is limited by its neglect of the wider social context in which activity systems are…

  4. Requirement analysis and sensor specifications – First version

    NARCIS (Netherlands)

    Sharma, Puneet; Wild, Fridolin; Klemke, Roland; Helin, Kaj; Azam, Tre

    2017-01-01

    In this first version of the deliverable, we make the following contributions: to design the WEKIT capturing platform and the associated experience capturing API, we use a methodology for system engineering that is relevant for different domains such as: aviation, space, and medical and different

  5. A Generalized and Refined Perturbed Version of Ostrowski Type Inequalities

    Directory of Open Access Journals (Sweden)

    M. Z. Sarikaya

    2017-01-01

    Full Text Available In this paper, we first obtain a new identity for twice differentiable mappings. Then, we establish generalized and improved perturbed version of Ostrowski type inequalities for functions whose derivatives are of bounded variation or second derivatives are either bounded or Lipschitzian.

  6. On a discrete version of Tanaka's theorem for maximal functions

    CERN Document Server

    Bober, Jonathan; Hughes, Kevin; Pierce, Lillian B

    2010-01-01

    In this paper we prove a discrete version of Tanaka's Theorem \\cite{Ta} for the Hardy-Littlewood maximal operator in dimension $n=1$, both in the non-centered and centered cases. For the discrete non-centered maximal operator $\\wM $ we prove that, given a function $f: \\Z \\to \\R$ of bounded variation,

  7. On Weakly Singular Versions of Discrete Nonlinear Inequalities and Applications

    Directory of Open Access Journals (Sweden)

    Kelong Cheng

    2014-01-01

    Full Text Available Some new weakly singular versions of discrete nonlinear inequalities are established, which generalize some existing weakly singular inequalities and can be used in the analysis of nonlinear Volterra type difference equations with weakly singular kernels. A few applications to the upper bound and the uniqueness of solutions of nonlinear difference equations are also involved.

  8. HAMLET. LITERATURE CURRICULUM VI, TEACHER AND STUDENT VERSIONS.

    Science.gov (United States)

    KITZHABER, ALBERT R.

    THIS CULMINATING UNIT OF THE 12TH-GRADE OREGON LITERATURE CURRICULUM IS BASED UPON ONE WORK, "HAMLET." THE TEACHER VERSION INCLUDES DISCUSSIONS OF (1) THE RELEVANCE OF HAMLET'S CHARACTER TO MODERN TIMES, (2) THE PROBLEMS IN THE CHARACTERIZATIONS OF THE GHOST, CLAUDIUS, AND HAMLET, (3) THE PLAY'S THREE-PHASE STRUCTURE, (4) THE PLAY'S…

  9. Reliability and Validity of a Turkish Version of the DELES

    Science.gov (United States)

    Ozkok, Alev; Walker, Scott L.; Buyukozturk, Sener

    2009-01-01

    The primary aim of this study was to examine the reliability and validity of a Turkish version of the Distance Education Learning Environment Survey (DELES) in post-secondary distance education. The second aim was to investigate empirically the conceptualisation of the distance education learning environment as a singular latent construct, within…

  10. UPC Language and Library Specifications, Version 1.3

    Energy Technology Data Exchange (ETDEWEB)

    UPC Consortium; Bonachea, Dan; Funck, Gary

    2013-11-16

    UPC is an explicitly parallel extension to the ISO C 99 Standard. UPC follows the partitioned global address space programming model. This document is the formal specification for the UPC language and library syntax and semantics, and supersedes prior specification version 1.2 (LBNL-59208).

  11. IDC Use Case Model Survey Version 1.1.

    Energy Technology Data Exchange (ETDEWEB)

    Harris, James Mark [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Carr, Dorthe B. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)

    2015-02-01

    This document contains the brief descriptions for the actors and use cases contained in the IDC Use Case Model. REVISIONS Version Date Author/Team Revision Description Authorized by V1.0 12/2014 SNL IDC Reengineering Project Team Initial delivery M. Harris V1.1 2/2015 SNL IDC Reengineering Project Team Iteration I2 Review Comments M. Harris

  12. Factor Structure of Japanese Versions of Two Emotional Intelligence Scales

    Science.gov (United States)

    Fukuda, Eriko; Saklofske, Donald H.; Tamaoka, Katsuo; Fung, Tak Shing; Miyaoka, Yayoi; Kiyama, Sachiko

    2011-01-01

    This article reports the psychometric properties of two emotional intelligence measures translated into Japanese. Confirmatory factor analysis (CFA) was conducted to examine the factor structure of a Japanese version of the Wong and Law Emotional Intelligence Scale (WLEIS) completed by 310 Japanese university students. A second study employed CFA…

  13. User's Manual for LEWICE Version 3.2

    Science.gov (United States)

    Wright, William

    2008-01-01

    A research project is underway at NASA Glenn to produce a computer code which can accurately predict ice growth under a wide range of meteorological conditions for any aircraft surface. This report will present a description of the code inputs and outputs from version 3.2 of this software, which is called LEWICE. This version differs from release 2.0 due to the addition of advanced thermal analysis capabilities for de-icing and anti-icing applications using electrothermal heaters or bleed air applications, the addition of automated Navier-Stokes analysis, an empirical model for supercooled large droplets (SLD) and a pneumatic boot option. An extensive effort was also undertaken to compare the results against the database of electrothermal results which have been generated in the NASA Glenn Icing Research Tunnel (IRT) as was performed for the validation effort for version 2.0. This report will primarily describe the features of the software related to the use of the program. Appendix A has been included to list some of the inner workings of the software or the physical models used. This information is also available in the form of several unpublished documents internal to NASA. This report is intended as a replacement for all previous user manuals of LEWICE. In addition to describing the changes and improvements made for this version, information from previous manuals may be duplicated so that the user will not need to consult previous manuals to use this software.

  14. X-ray Photoelectron Spectroscopy Database (Version 4.1)

    Science.gov (United States)

    SRD 20 X-ray Photoelectron Spectroscopy Database (Version 4.1) (Web, free access)   The NIST XPS Database gives access to energies of many photoelectron and Auger-electron spectral lines. The database contains over 22,000 line positions, chemical shifts, doublet splittings, and energy separations of photoelectron and Auger-electron lines.

  15. IDC Use Case Model Survey Version 1.0.

    Energy Technology Data Exchange (ETDEWEB)

    Carr, Dorthe B.; Harris, James M.

    2014-12-01

    This document contains the brief descriptions for the actors and use cases contained in the IDC Use Case Model Survey. REVISIONS Version Date Author/Team Revision Description Authorized by V1.0 12/2014 IDC Re- engineering Project Team Initial delivery M. Harris

  16. New features in McStas, version 1.5

    DEFF Research Database (Denmark)

    Åstrand, P.O.; Lefmann, K.; Farhi, E.

    2002-01-01

    The neutron ray-tracing simulation package McStas has attracted numerous users, and the development of the package continues with version 1.5 released at the ICNS 2001 conference. New features include: support for neutron polarisation, labelling of neutrons, realistic source and sample components...

  17. The Eysenck Personality Questionnaire Brief Version: factor structure and reliability.

    Science.gov (United States)

    Sato, Toru

    2005-11-01

    The short scale of the Eysenck Personality Questionnaire-Revised (EPQR-S; H. J. Eysenck & S. B. G. Eysenck, 1992) is a 48-item personality questionnaire primarily designed to measure an individual's level of extraversion (vs. introversion) and neuroticism. Although L. J. Francis, L. B. Brown, and R. Philipchalk (1992) created the Eysenck Personality Questionnaire Revised-Abbreviated (EPQR-A), an even briefer version of the EPQR-S, the reliability coefficients of some of the measures have been less than satisfactory (S. Forrest, C. A. Lewis, & M. Shevlin, 2000). Because brevity and reliability are both extremely important, the author of the present study created a briefer version of the EPQR-S, more reliable than the EPQR-A, by making slight alterations in the item content as well as the response format of the EPQR-S. Two hundred and sixty eight participants completed the original EPQR-S and the 24-item newly revised briefer version of the EPQR-S (EPQ-BV) twice. The findings revealed that the EPQ-BV has good internal consistency, test-retest reliability, and concurrent validity. A principal component analysis revealed a solution with factor loadings that accurately reflected the primary measures of the EPQR-S. These findings are discussed in relation to the psychometric properties of the EPQR-A and the original version of the EPQR-S.

  18. A Multi-threaded Version of Field II

    DEFF Research Database (Denmark)

    Jensen, Jørgen Arendt

    2014-01-01

    in a plane of 20 x 50 mm (width x depth) with random Gaussian amplitudes were simulated using the command calc scat . Dual Intel Xeon CPU E5-2630 2.60 GHz CPUs were used under Ubuntu Linux 10.02 and Matlab version 2013b. Each CPU holds 6 cores with hyper-threading, corresponding to a total of 24 hyper...

  19. Engestrom's Version of Activity Theory: A Conservative Praxis?

    Science.gov (United States)

    Avis, James

    2007-01-01

    This article examines Engestrom's version of activity theory, one rooted in Marxism. It is argued that whilst this approach holds progressive possibilities, its radicalism is undermined by a restricted conceptualisation of transformation and the marginalisation of a politicised notion of social antagonism. As a consequence, this approach to…

  20. EPEC-O Self-Study - Original Version

    Science.gov (United States)

    The EPEC-O (Education in Palliative and End-of-Life Care for Oncology) Self-Study Original Version is a free comprehensive multimedia curricula for health professionals caring for persons with cancer and their families. The curricula is available as an online Self-Study Section and as a CD-ROM you can order.

  1. NetCDF structure versioning on the ARM program

    Science.gov (United States)

    Macduff, M.; Beus, S.; Ermold, B.; Sivaraman, C.

    2011-12-01

    The DOE ARM program has produced netcdf data for more than 600 instruments (and more than 100 unique types) since 1994. In addition to instrument changes over time, the software processes have gone through several iterations. So, while the data is in a common netcdf format, some significant variability has occurred over time. Processes that use long-time ranges of these data are forced to deal with these unannounced changes and determine their relevance. In 2006 the ARM program adopted a definition for the structure of a netcdf data file. Using this definition, libraries, a database and management tools were developed to create, store, review, use and enforce changes to the structure of the netcdf files. These are stored as discrete versions allowing for clarity and consistency over time. ARM recently completed the migration of most of the active instruments into this new system and has more than 200 versions created. Having these versions is an important tool for communicating and planning data reprocessing and especially for higher order products to use as a reference of known, documented change. This paper discusses the implementation of structure versioning on ARM, the benefits we foresee and its limitations.

  2. Africa Soil Profiles Database, Version 1.0

    NARCIS (Netherlands)

    Leenaars, J.G.B.

    2012-01-01

    The Africa Soil Profiles Database, Version 1.0, was compiled by ISRIC - World Soil Information as a project activity for the Globally integrated- Africa Soil Information Service (AfSIS) project (www.africasoils.net/data/legacyprofile). The Africa Soil Profiles Database is a compilation of georeferen

  3. Sensemaking technologies

    DEFF Research Database (Denmark)

    Madsen, Charlotte Øland

    & Brass, 1990; Kling 1991; Orlikowski 2000). It also demonstrates that technology is a flexible variable adapted to the organisation's needs, culture, climate and management philosophy, thus leading to different uses and outcomes of the same technology in different organisations (Barley 1986; 1990......, Orlikowski 2000). Viewing the use of technology as a process of enactment opens up for investigating the social processes of interpreting new technology into the organisation (Orlikowski 2000). The scope of the PhD project will therefore be to gain a deeper understanding of how the enactment of new...

  4. Chemistry Technology

    Data.gov (United States)

    Federal Laboratory Consortium — Chemistry technology experts at NCATS engage in a variety of innovative translational research activities, including:Design of bioactive small molecules.Development...

  5. AF-GEOSpace Version 2.1 Release

    Science.gov (United States)

    Hilmer, R. V.; Ginet, G. P.; Hall, T.; Holeman, E.; Madden, D.; Perry, K. L.; Tautz, M.; Roth, C.

    2006-05-01

    AF-GEOSpace Version 2.1 is a graphics-intensive software program with space environment models and applications developed recently by the Space Weather Center of Excellence at AFRL. A review of new and planned AF-GEOSpace capabilities will be given. The software addresses a wide range of physical domains and addresses such topics as solar disturbance propagation, geomagnetic field and radiation belt configurations, auroral particle precipitation, and ionospheric scintillation. Building on the success of previous releases, AF-GEOSpace has become a platform for the rapid prototyping of automated operational and simulation space weather visualization products and helps with a variety of tasks, including: orbit specification for radiation hazard avoidance; satellite design assessment and post-event anomaly analysis; solar disturbance effects forecasting; determination of link outage regions for active ionospheric conditions; satellite magnetic conjugate studies, scientific model validation and comparison, physics research, and education. Previously, Version 2.0 provided a simplified graphical user interface, improved science and application modules, significantly enhanced graphical performance, common input data archive sets, and 1-D, 2-D, and 3- D visualization tools for all models. Dynamic capabilities permit multiple environments to be generated at user- specified time intervals while animation tools enable the display of satellite orbits and environment data together as a function of time. Building on the Version 2.0 software architecture, AF-GEOSpace Version 2.1 includes a host of new modules providing, for example, plasma sheet charged particle fluxes, neutral atmosphere densities, 3-D cosmic ray cutoff maps, low-altitude trapped proton belt flux specification, DMSP particle data displays, satellite magnetic field footprint mapping determination, and meteor sky maps and shower/storm fluxes with spacecraft impact probabilities. AF-GEOSpace Version 2.1 was

  6. A resource-based version of the argument that cloning is an affront to human dignity.

    Science.gov (United States)

    McDougall, R

    2008-04-01

    The claim that human reproductive cloning constitutes an affront to human dignity became a familiar one in 1997 as policymakers and bioethicists responded to the announcement of the birth of Dolly the sheep. Various versions of the argument that reproductive cloning is an affront to human dignity have been made, most focusing on the dignity of the child produced by cloning. However, these arguments tend to be unpersuasive and strongly criticised in the bioethical literature. In this paper I put forward a different argument that reproductive cloning is an affront to human dignity, one that looks beyond the dignity of the child produced. I suggest that allocating funds to such a pursuit can affront human dignity by diverting resources away from those existing people who lack sufficient health to enable them to exercise basic rights and liberties. This version of the argument posits cloning as an affront to human dignity in particular circumstances, rather than claiming the technology as intrinsically inconsistent with human dignity.

  7. Cultural adaptation and validation of the Portuguese version of the Nursing Clinical Facilitators Questionnaire

    Science.gov (United States)

    Frederico-Ferreira, Maria Manuela; Camarneiro, Ana Paula Forte; Loureiro, Cândida Rosalinda Exposto da Costa; Ventura, Maria Clara Amado Apóstolo

    2016-01-01

    ABSTRACT Objective: to perform the cultural adaptation to Portuguese of the Nursing Clinical Facilitators Questionnaire (NCFQ), which was designed by the Centre for Learning and Teaching at the University of Technology of Sydney, and to validate this instrument. Methods: this methodological study involved the cultural adaptation of the questionnaire by using translation, back-translation, semantic comparison, idiomatic and conceptual equivalence, and validation through validity and reliability analyses and used a sample of 767 students in their second year of the Nursing Program. Results: construct validity had a two-factor solution according to the varimax rotation method. In addition, there was a high overall internal consistency for the questionnaire (Cronbach's alpha of 0.977) and for the factors found (0.966 and 0.952, respectively). Conclusion: the Portuguese version has good psychometric characteristics; therefore, it is adequate to obtain reliable information on the perception of nursing students concerning the type of supervision that is provided in clinical practice, and this version is adequate to improve teaching practices. PMID:27533275

  8. Motivation and Design of the Sirocco Storage System Version 1.0.

    Energy Technology Data Exchange (ETDEWEB)

    Curry, Matthew Leon [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Ward, H. Lee [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Danielson, Geoffrey Charles [Hewlett-Packard Company, Palo Alto, CA (United States)

    2015-07-01

    Sirocco is a massively parallel, high performance storage system for the exascale era. It emphasizes client-to-client coordination, low server-side coupling, and free data movement to improve resilience and performance. Its architecture is inspired by peer-to-peer and victim- cache architectures. By leveraging these ideas, Sirocco natively supports several media types, including RAM, flash, disk, and archival storage, with automatic migration between levels. Sirocco also includes storage interfaces and support that are more advanced than typical block storage. Sirocco enables clients to efficiently use key-value storage or block-based storage with the same interface. It also provides several levels of transactional data updates within a single storage command, including full ACID-compliant updates. This transaction support extends to updating several objects within a single transaction. Further support is provided for con- currency control, enabling greater performance for workloads while providing safe concurrent modification. By pioneering these and other technologies and techniques in the storage system, Sirocco is poised to fulfill a need for a massively scalable, write-optimized storage system for exascale systems. This is version 1.0 of a document reflecting the current and planned state of Sirocco. Further versions of this document will be accessible at http://www.cs.sandia.gov/Scalable_IO/ sirocco .

  9. Risk Analysis and Decision-Making Software Package (1997 Version) User Manual

    Energy Technology Data Exchange (ETDEWEB)

    Chung, F.T.H.

    1999-02-11

    This manual provides instructions for using the U.S. Department of Energy's (DOE) risk analysis and decision making software (1997 version) developed at BDM Petroleum Technologies by BDM-Oklahoma, Inc. for DOE, under contract No. DE-AC22-94PC91OO8. This software provides petroleum producers with a simple, handy tool for exploration and production risk analysis and decision-making. It collects useful risk analysis tools in one package so that users do not have to use several programs separately. The software is simple to use, but still provides many functions. The 1997 version of the software package includes the following tools: (1) Investment risk (Gambler's ruin) analysis; (2) Monte Carlo simulation; (3) Best fit for distribution functions; (4) Sample and rank correlation; (5) Enhanced oil recovery method screening; and (6) artificial neural network. This software package is subject to change. Suggestions and comments from users are welcome and will be considered for future modifications and enhancements of the software. Please check the opening screen of the software for the current contact information. In the future, more tools will be added to this software package. This manual includes instructions on how to use the software but does not attempt to fully explain the theory and algorithms used to create it.

  10. Implementation of the external cephalic version in breech delivery. Dutch national implementation study of external cephalic version

    NARCIS (Netherlands)

    Vlemmix, F.; Rosman, A.N.; Fleuren, M.A.H.; Rijnders, M.E.B.; Beuckens, A.; Haak, M.C.; Akerboom, B.M.C.; Bais, J.M.J.; Kuppens, S.M.I.; Papatsonis, D.N.; Opmeer, B.C.; Post, J.A.M. van der; Mol, B.W.J.; Kok, M.

    2010-01-01

    Background: Breech presentation occurs in 3 to 4% of all term pregnancies. External cephalic version (ECV) is proven effective to prevent vaginal breech deliveries and therefore it is recommended by clinical guidelines of the Royal Dutch Organisation for Midwives (KNOV) and the Dutch Society for Obs

  11. Validity and reliability of the Brazilian version of Yale-Brown obsessive compulsive scale-shopping version (YBOCS-SV).

    Science.gov (United States)

    Leite, Priscilla Lourenço; Filomensky, Tatiana Zambrano; Black, Donald W; Silva, Adriana Cardoso

    2014-08-01

    The Yale-Brown Obsessive Compulsive Scale-Shopping Version (YBOCS-SV) is considered the gold standard in the assessment of shopping severity. It is designed to assess cognitions and behaviors relating to compulsive buying behavior. The present study aims to assess the validity of the Brazilian version of this scale. For the study, composed the sample 610 participants: 588 subjects of a general population and 22 compulsive buyers. Factorial analysis was performed to assess the relations and the correlation between the YBOCS-SV, the Compulsive Buying Scale (CBS), and Richmond Compulsive Buying Scale (RCBS), was assessed using Pearson coefficient, for study of convergent and divergent validity. Cronbach's alpha coefficients were used to assess internal consistency. The results show good to excellent psychometric parameters for the YBOCS-SV in its Brazilian version. With regard to correlations, the YBOCS-SV is inversely and proportionally correlated with CBS and the RCBS, indicating that the YBOCS-SV is an excellent instrument for screening compulsive buying. The YBOCS-SV presented high alpha coefficient of Cronbach's alpha (0.92), demonstrating good reliability. The Brazilian version of the YBOCS-SV is indicated to diagnose compulsive buying disorder, and likely use for the purposes intended in the Brazilian population. Copyright © 2014 Elsevier Inc. All rights reserved.

  12. Energy Integration for 2050 - A Strategic Impact Model (2050 SIM), Version 2.0

    Energy Technology Data Exchange (ETDEWEB)

    John Collins

    2011-09-01

    The United States (U.S.) energy infrastructure is among the most reliable, accessible, and economic in the world. On the other hand, it is also excessively reliant on foreign energy sources, experiences high volatility in energy prices, does not always practice good stewardship of finite indigenous energy resources, and emits significant quantities of greenhouse gas. The U.S. Department of Energy is conducting research and development on advanced nuclear reactor concepts and technologies, including High Temperature Gas Reactor (HTGR) technologies, directed at helping the United States meet its current and future energy challenges. This report discusses the Draft Strategic Impact Model (SIM), an initial version of which was created during the later part of FY-2010. SIM was developed to analyze and depict the benefits of various energy sources in meeting the energy demand and to provide an overall system understanding of the tradeoffs between building and using HTGRs versus other existing technologies for providing energy (heat and electricity) to various energy-use sectors in the United States. This report also provides the assumptions used in the model, the rationale for the methodology, and the references for the source documentation and source data used in developing the SIM.

  13. Energy Integration for 2050 - A Strategic Impact Model (2050 SIM), Version 1.0

    Energy Technology Data Exchange (ETDEWEB)

    2010-10-01

    The United States (U.S.) energy infrastructure is among the most reliable, accessible, and economic in the world. On the other hand, it is also excessively reliant on foreign energy sources, experiences high volatility in energy prices, does not always practice good stewardship of finite indigenous energy resources, and emits significant quantities of greenhouse gas. The U.S. Department of Energy is conducting research and development on advanced nuclear reactor concepts and technologies, including High Temperature Gas Reactor (HTGR) technologies, directed at helping the United States meet its current and future energy challenges. This report discusses the Draft Strategic Impact Model (SIM), an initial version of which was created during the later part of FY-2010. SIM was developed to analyze and depict the benefits of various energy sources in meeting the energy demand and to provide an overall system understanding of the tradeoffs between building and using HTGRs versus other existing technologies for providing energy (heat and electricity) to various energy-use sectors in the United States. This report also provides the assumptions used in the model, the rationale for the methodology, and the references for the source documentation and source data used in developing the SIM.

  14. Design document for the Surface Currents Data Base (SCDB) Management System (SCDBMS), version 1.0

    Science.gov (United States)

    Krisnnamagaru, Ramesh; Cesario, Cheryl; Foster, M. S.; Das, Vishnumohan

    1994-01-01

    The Surface Currents Database Management System (SCDBMS) provides access to the Surface Currents Data Base (SCDB) which is maintained by the Naval Oceanographic Office (NAVOCEANO). The SCDBMS incorporates database technology in providing seamless access to surface current data. The SCDBMS is an interactive software application with a graphical user interface (GUI) that supports user control of SCDBMS functional capabilities. The purpose of this document is to define and describe the structural framework and logistical design of the software components/units which are integrated into the major computer software configuration item (CSCI) identified as the SCDBMS, Version 1.0. The preliminary design is based on functional specifications and requirements identified in the governing Statement of Work prepared by the Naval Oceanographic Office (NAVOCEANO) and distributed as a request for proposal by the National Aeronautics and Space Administration (NASA).

  15. Design document for the MOODS Data Management System (MDMS), version 1.0

    Science.gov (United States)

    1994-01-01

    The MOODS Data Management System (MDMS) provides access to the Master Oceanographic Observation Data Set (MOODS) which is maintained by the Naval Oceanographic Office (NAVOCEANO). The MDMS incorporates database technology in providing seamless access to parameter (temperature, salinity, soundspeed) vs. depth observational profile data. The MDMS is an interactive software application with a graphical user interface (GUI) that supports user control of MDMS functional capabilities. The purpose of this document is to define and describe the structural framework and logical design of the software components/units which are integrated into the major computer software configuration item (CSCI) identified as MDMS, Version 1.0. The preliminary design is based on functional specifications and requirements identified in the governing Statement of Work prepared by the Naval Oceanographic Office (NAVOCEANO) and distributed as a request for proposal by the National Aeronautics and Space Administration (NASA).

  16. Beautiful guides. The value of explainers in science communication (Italian original version

    Directory of Open Access Journals (Sweden)

    Paola Rodari

    2005-12-01

    Full Text Available During the last annual conference of ECSITE (European Collaborative for Science and Technology Exhibitions; Helsinki, June 2005, for the first time two discussion sessions were devoted to explainers, the innumerable people – young students mainly – who welcome visitors at exhibitions, museums and festivals, who animate laboratories and science shows, who guide, explain and lately also stimulate and manage discussions and participatory procedures. Thanks to the involvement of the speakers, who agreed to submit a broadened version of their papers, JCOM is glad to host the proceedings of these meetings. A great deal has to be done yet in order to analyse the complex European context and to fully understand the explainer’s professional profile.

  17. Thermally activated technologies: Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2003-05-01

    The purpose of this Technology Roadmap is to outline a set of actions for government and industry to develop thermally activated technologies for converting America’s wasted heat resources into a reservoir of pollution-free energy for electric power, heating, cooling, refrigeration, and humidity control. Fuel flexibility is important. The actions also cover thermally activated technologies that use fossil fuels, biomass, and ultimately hydrogen, along with waste heat.

  18. Thermally activated technologies: Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2003-05-01

    The purpose of this Technology Roadmap is to outline a set of actions for government and industry to develop thermally activated technologies for converting America’s wasted heat resources into a reservoir of pollution-free energy for electric power, heating, cooling, refrigeration, and humidity control. Fuel flexibility is important. The actions also cover thermally activated technologies that use fossil fuels, biomass, and ultimately hydrogen, along with waste heat.

  19. New version: GRASP2K relativistic atomic structure package

    Science.gov (United States)

    Jönsson, P.; Gaigalas, G.; Bieroń, J.; Fischer, C. Froese; Grant, I. P.

    2013-09-01

    A revised version of GRASP2K [P. Jönsson, X. He, C. Froese Fischer, I.P. Grant, Comput. Phys. Commun. 177 (2007) 597] is presented. It supports earlier non-block and block versions of codes as well as a new block version in which the njgraf library module [A. Bar-Shalom, M. Klapisch, Comput. Phys. Commun. 50 (1988) 375] has been replaced by the librang angular package developed by Gaigalas based on the theory of [G. Gaigalas, Z.B. Rudzikas, C. Froese Fischer, J. Phys. B: At. Mol. Phys. 30 (1997) 3747, G. Gaigalas, S. Fritzsche, I.P. Grant, Comput. Phys. Commun. 139 (2001) 263]. Tests have shown that errors encountered by njgraf do not occur with the new angular package. The three versions are denoted v1, v2, and v3, respectively. In addition, in v3, the coefficients of fractional parentage have been extended to j=9/2, making calculations feasible for the lanthanides and actinides. Changes in v2 include minor improvements. For example, the new version of rci2 may be used to compute quantum electrodynamic (QED) corrections only from selected orbitals. In v3, a new program, jj2lsj, reports the percentage composition of the wave function in LSJ and the program rlevels has been modified to report the configuration state function (CSF) with the largest coefficient of an LSJ expansion. The bioscl2 and bioscl3 application programs have been modified to produce a file of transition data with one record for each transition in the same format as in ATSP2K [C. Froese Fischer, G. Tachiev, G. Gaigalas, M.R. Godefroid, Comput. Phys. Commun. 176 (2007) 559], which identifies each atomic state by the total energy and a label for the CSF with the largest expansion coefficient in LSJ intermediate coupling. All versions of the codes have been adapted for 64-bit computer architecture. Program SummaryProgram title: GRASP2K, version 1_1 Catalogue identifier: ADZL_v1_1 Program summary URL: http://cpc.cs.qub.ac.uk/summaries/ADZL_v1_1.html Program obtainable from: CPC Program Library

  20. Preliminary site description Forsmark area - version 1.1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-03-01

    This report presents the interim version (model version 1.1) of the preliminary Site Descriptive Model for Forsmark. The basis for this interim version is quality-assured, geoscientific and ecological field data from Forsmark that were available in the SKB databases SICADA and GIS at April 30, 2003 as well as version 0 of the Site Descriptive Model. The new data acquired during the initial site investigation phase to the date of data freeze 1.1 constitute the basis for the updating of version 0 to version 1.1. These data originate from surface investigations on the candidate area with its regional environment and from drilling and investigations in boreholes. The surface-based data sets were rather extensive whereas the data sets from boreholes were limited to information from one 1,000 m deep cored borehole (KFM01A) and eight 150 to 200 m deep percussion-drilled boreholes in the Forsmark candidate area. Discipline specific models are developed for a selected regional and local model volume and these are then integrated into a site description. The current methodologies for developing the discipline specific models and the integration of these are documented in methodology reports or strategy reports. In the present work, the guidelines given in those reports were followed to the extent possible with the data and information available at the time for data freeze for model version 1.1. Compared with version 0 there are considerable additional features in the version 1.1, especially in the geological description and in the description of the near surface. The geological models of lithology and deformation zones are based on borehole information and much higher resolution surface data. The existence of highly fractured sub-horizontal zones has been verified and these are now part of the model of the deformation zones. A discrete fracture network (DFN) model has also been developed. The rock mechanics model is based on strength information from SFR and an empirical

  1. Plastics Technology.

    Science.gov (United States)

    Barker, Tommy G.

    This curriculum guide is designed to assist junior high schools industrial arts teachers in planning new courses and revising existing courses in plastics technology. Addressed in the individual units of the guide are the following topics: introduction to production technology; history and development of plastics; safety; youth leadership,…

  2. Lasers technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    The Lasers Technology Program of IPEN is committed to the development of new lasers based on the research of optical materials and new technologies, as well to laser applications in several areas: Nuclear, Medicine, Dentistry, Industry, Environment and Advanced Research. The Program is basically divided into two main areas: Material and Laser Development and Laser Applications.

  3. Maritime Technology

    DEFF Research Database (Denmark)

    Sørensen, Herman

    1997-01-01

    Elementary introduction to the subject "Maritime Technology".The contents include drawings, sketches and references in English without any supplementary text.......Elementary introduction to the subject "Maritime Technology".The contents include drawings, sketches and references in English without any supplementary text....

  4. Maritime Technology

    DEFF Research Database (Denmark)

    Sørensen, Herman

    1997-01-01

    Elementary introduction to the subject "Maritime Technology".The contents include drawings, sketches and references in English without any supplementary text.......Elementary introduction to the subject "Maritime Technology".The contents include drawings, sketches and references in English without any supplementary text....

  5. Technology Push

    Science.gov (United States)

    Kennedy, Mike

    2008-01-01

    When students, teachers, administrators and others employed in education arrive at work every day on thousands of campuses across the nation, it should come as no surprise that at every step along the way, technology is there to greet them. Technological advancements in education, as well as in facilities operation and management, are not a…

  6. CBP Toolbox Version 3.0 “Beta Testing” Performance Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Smith, III, F. G. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-07-29

    One function of the Cementitious Barriers Partnership (CBP) is to assess available models of cement degradation and to assemble suitable models into a “Toolbox” that would be made available to members of the partnership, as well as the DOE Complex. To this end, SRNL and Vanderbilt University collaborated to develop an interface using the GoldSim software to the STADIUM@ code developed by SIMCO Technologies, Inc. and LeachXS/ORCHESTRA developed by Energy research Centre of the Netherlands (ECN). Release of Version 3.0 of the CBP Toolbox is planned in the near future. As a part of this release, an increased level of quality assurance for the partner codes and the GoldSim interface has been developed. This report documents results from evaluation testing of the ability of CBP Toolbox 3.0 to perform simulations of concrete degradation applicable to performance assessment of waste disposal facilities. Simulations of the behavior of Savannah River Saltstone Vault 2 and Vault 1/4 concrete subject to sulfate attack and carbonation over a 500- to 1000-year time period were run using a new and upgraded version of the STADIUM@ code and the version of LeachXS/ORCHESTRA released in Version 2.0 of the CBP Toolbox. Running both codes allowed comparison of results from two models which take very different approaches to simulating cement degradation. In addition, simulations of chloride attack on the two concretes were made using the STADIUM@ code. The evaluation sought to demonstrate that: 1) the codes are capable of running extended realistic simulations in a reasonable amount of time; 2) the codes produce “reasonable” results; the code developers have provided validation test results as part of their code QA documentation; and 3) the two codes produce results that are consistent with one another. Results of the evaluation testing showed that the three criteria listed above were met by the CBP partner codes. Therefore, it is concluded that

  7. Is the full version of the AUDIT really necessary? Study of the validity and internal construct of its abbreviated versions.

    Science.gov (United States)

    Meneses-Gaya, Carolina; Zuardi, Antonio W; Loureiro, Sonia R; Hallak, Jaime E C; Trzesniak, Clarissa; de Azevedo Marques, João M; Machado-de-Sousa, João P; Chagas, Marcos H N; Souza, Roberto M; Crippa, José A S

    2010-08-01

    This study was aimed at assessing the psychometric qualities of the abbreviated versions of the Alcohol Use Disorders Identification Test (AUDIT-3, AUDIT-4, AUDIT-C, AUDIT-PC, AUDIT-QF, FAST, and Five-Shot) and at comparing them to the 10-item AUDIT and the CAGE in 2 samples of Brazilian adults. The validity and internal consistency of the scales were assessed in a sample of 530 subjects attended at an emergency department and at a Psychosocial Care Center for Alcohol and Drugs. The Structured Clinical Interview for DSM-IV was used as the diagnostic comparative measure for the predictive validity assessment. The concurrent validity between the scales was analyzed by means of Pearson's correlation coefficient. The assessment of the predictive validity of the abbreviated versions showed high sensitivity (of 0.78 to 0.96) and specificity (of 0.74 to 0.94) indices, with areas under the curve as elevated as those of the AUDIT (0.89 and 0.92 to screen for abuse and 0.93 and 0.95 in the screening of dependence). The CAGE presented lower indices: 0.81 for abuse and 0.87 for dependence. The analysis of the internal consistency of the AUDIT and its versions exhibited Cronbach's alpha coefficients between 0.83 and 0.94, while the coefficient for the CAGE was 0.78. Significant correlations were found between the 10-item AUDIT and its versions, ranging from 0.91 to 0.99. Again, the results for the CAGE were satisfactory (0.77), although inferior to the other instruments. The results obtained in this study confirm the validity of the abbreviated versions of the AUDIT for the screening of alcohol use disorders and show that their psychometric properties are as satisfactory as those of the 10-item AUDIT and the CAGE.

  8. Sensemaking technology

    DEFF Research Database (Denmark)

    Madsen, Charlotte Øland

    Research objective: The object of the LOK research project is to gain a better understanding of the technological strategic processes in organisations by using the concept/metaphor of sensemaking. The project will investigate the technological strategies in organisations in order to gain a deeper...... understanding of the cognitive competencies and barriers towards implementing new technology in organisations. The research will therefore concentrate on researching the development process in the organisation's perception of the external environmental elements of customers, suppliers, competitors, internal...... and external technology and legislation and the internal environmental elements of structure, power relations and political arenas. All of these variables have influence on which/how technologies are implemented thus creating different outcomes all depending on the social dynamics that are triggered by changes...

  9. Sensemaking technology

    DEFF Research Database (Denmark)

    Madsen, Charlotte Øland

    Research objective: The object of the LOK research project is to gain a better understanding of the technological strategic processes in organisations by using the concept/metaphor of sensemaking. The project will investigate the technological strategies in organisations in order to gain a deeper...... understanding of the cognitive competencies and barriers towards implementing new technology in organisations. The research will therefore concentrate on researching the development process in the organisation's perception of the external environmental elements of customers, suppliers, competitors, internal...... and external technology and legislation and the internal environmental elements of structure, power relations and political arenas. All of these variables have influence on which/how technologies are implemented thus creating different outcomes all depending on the social dynamics that are triggered by changes...

  10. Technology collaboration

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Jacob [Halliburton (Brazil)

    2011-07-01

    The aim of this paper is to present Halliburton's Brazilian technology center. Halliburton has technology centers in the United States, Saudi Arabia, India, Singapore and Brazil, all of which aim at delivering accelerated innovation in the oil sector. The technology centers engage in research and development activities with the help of various universities and in collaboration with the customer or supplier. The Halliburton Brazil technology center provides its customers with timely research and development solutions for enhancing recovery and mitigating reservoir uncertainty; they are specialized in finding solutions for pre- and post-salt carbonate drilling and in the enhancement of production from mature fields. This presentation showcased the work carried out by the Halliburton Brazil technology center to help customers develop their deepwater field activities.

  11. mFOAM-1.02: A compact version of the cellular event generator FOAM

    Science.gov (United States)

    Jadach, S.; Sawicki, P.

    2007-09-01

    The general-purpose self-adapting Monte Carlo (MC) event generator/simulator mFOAM (standing for mini-FOAM) is a new compact version of the FOAM program, with a slightly limited functionality with respect to its parent version. On the other hand, mFOAM is easier to use for the average user. This new version is fully integrated with the ROOT package, the C++ utility library used widely in the particle physics community. The internal structure of the code is simplified and the very valuable feature of the persistency of the objects of the mFOAM class is improved. With the persistency at hand, it is possible to record very easily the complete state of a MC simulator object based on mFOAM and ROOT into a disk-file at any stage of its use: just after object allocation, after full initialization (exploration of the distribution), or at any time during the generation of the long series of MC events. Later on the MC simulator object can be easily restored from the disk-file in the "ready to go" state. Objects of the TFoam class can be used as a stand-alone solution to many everyday problems in the area of the Monte Carlo simulation, or as building blocks in large-scale MC projects, taking full advantage of the object-oriented technology and persistency. Program summaryManuscript title: mFOAM-1.02: A compact version of the cellular event generator FOAM Authors: S. Jadach, P. Sawicki Program title: mFOAM (mini FOAM), version 1.02 Catalogue identifier: ADYX_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADYX_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 2 036 711 No. of bytes in distributed program, including test data, etc.: 21 403 104 Distribution format: tar.gz Programming language: ANSI C++ Computer: Most Unix workstations, supercomputers and PC Operating

  12. Current Status of Concentrator Photovoltaic (CPV) Technology

    Energy Technology Data Exchange (ETDEWEB)

    Philipps, Simon P. [Fraunhofer Inst. for Solar Energy Systems ISE, Freiburg (Germany); Bett, Andreas W. [Fraunhofer Inst. for Solar Energy Systems ISE, Freiburg (Germany); Horowitz, Kelsey [National Renewable Energy Lab. (NREL), Golden, CO (United States); Kurtz, Sarah [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-12-01

    This report summarizes the status of the concentrator photovoltaic (CPV) market and industry as well as current trends in research and technology. This report is intended to guide research agendas for Fraunhofer ISE, the National Renewable Energy Laboratory (NREL), and other R&D organizations. Version 1.1 of this report includes recent progress in CPV. The recent record module efficiency of 38.9% at Concentrator Standard Test Conditions (CSTC) is an impressive result, demonstrating the continuing opportunity for CPV technology to improve. 38.9% at Concentrator Standard Test Conditions (CSTC) is an impressive result, demonstrating the continuing opportunity for CPV technology to improve. 38.9% at Concentrator Standard Test Conditions (CSTC) is an impressive result, demonstrating the continuing opportunity for CPV technology to improve. 38.9% at Concentrator Standard Test Conditions (CSTC) is an impressive result, demonstrating the continuing opportunity for CPV technology to improve.

  13. Designing Work, Technology, Organizations and Vice Versa

    DEFF Research Database (Denmark)

    link work and organisation to the use of artefacts and technological systems (and vice versa), exploring by means of different cases of organizational and design research articulations and disarticulations of daily work and design; the doing of objects and technologies in everyday organizational life...... of design has been ‘black-boxed’ and easily implied as an updated (and more fashionable) version of the traditional idea of structuring organizational processes. At the same time, working and organizing seem to be embedded nowadays in increasingly complex and situated technologies and practices....... If the spreading of information and communication technologies (ICTs) has changed workplaces (and even the very meaning of 'workplace' as an area marked by the physical presence of different human actors), working and organizing mobilizes the joint action of humans, technologies and knowledges. The aim of the book...

  14. DF-224 Version 8.0 FS Installation

    Science.gov (United States)

    Boyce, Leslye

    1990-12-01

    DF-224 Version 8.0 will implement the final phase of the 3 Logical Memory Unit Contingency Plan described in LMSC,EM SPS640. It focuses on new capabilities, implementing a spin stabilized safemode, correcting the integral calculation in Momentum Management Law and other miscellaneous command changes geared at enhancing acquistions and science. Due to the complexity of the installation, dedicated space-craft time is required to minimize risk. In summary, this proposal requests 7 orbits of dedicated spacecraft time for installation, regression testing and contingency back-out time for DF-224 Flight Software (FS) Version 8.0 for the week of April 27,(SMS118). No dedicated time is requested for the pre-load of the FS.

  15. The NERC Vocabulary Server: Version 2.0

    Science.gov (United States)

    Leadbetter, A. M.; Lowry, R. K.

    2012-12-01

    The Natural Environment Research Council (NERC) Vocabulary Server (NVS) has been used to publish controlled vocabularies of terms relevant to marine environmental sciences since 2006 (version 0) with version 1 being introduced in 2007. It has been used for - metadata mark-up with verifiable content - populating dynamic drop down lists - semantic cross-walk between metadata schemata - so-called smart search - and the semantic enablement of Open Geospatial Consortium (OGC) Web Processing Services in the NERC Data Grid and the European Commission SeaDataNet, Geo-Seas, and European Marine Observation and Data Network (EMODnet) projects. The NVS is based on the Simple Knowledge Organization System (SKOS) model. SKOS is based on the "concept", which it defines as a "unit of thought", that is an idea or notion such as "oil spill". Following a version change for SKOS in 2009 there was a desire to upgrade the NVS to incorporate the changes. This version of SKOS introduces the ability to aggregate concepts in both collections and schemes. The design of version 2 of the NVS uses both types of aggregation: schemes for the discovery of content through hierarchical thesauri and collections for the publication and addressing of content. Other desired changes from version 1 of the NVS included: - the removal of the potential for multiple identifiers for the same concept to ensure consistent addressing of concepts - the addition of content and technical governance information in the payload documents to provide an audit trail to users of NVS content - the removal of XML snippets from concept definitions in order to correctly validate XML serializations of the SKOS - the addition of the ability to map into external knowledge organization systems in order to extend the knowledge base - a more truly RESTful approach URL access to the NVS to make the development of applications on top of the NVS easier - and support for multiple human languages to increase the user base of the NVS

  16. Gestion de versions de formats avec Camlp4

    OpenAIRE

    2007-01-01

    National audience; La gestion des changements de formats est un problème crucial de l'informatique : encore aujourd'hui, peu d'applications sont capables de lire des données sauvées dans un format d'une version antérieure ; en distribué, les versions de programmes devant communiquer entre eux sont de plus en plus hétérogènes, en particuliers dans les systèmes pair-à-pair. Dans ce papier, nous présentons une extension de syntaxe d'Objective-Caml en Camlp4 permettant de gérer plus efficacement ...

  17. Model Versions and Fast Algorithms for Network Epidemiology

    Institute of Scientific and Technical Information of China (English)

    Petter Holme

    2014-01-01

    Network epidemiology has become a core framework for investigating the role of human contact patterns in the spreading of infectious diseases. In network epidemiology, one represents the contact structure as a network of nodes (individuals) connected by links (sometimes as a temporal network where the links are not continuously active) and the disease as a compartmental model (where individuals are assigned states with respect to the disease and follow certain transition rules between the states). In this paper, we discuss fast algorithms for such simulations and also compare two commonly used versions,one where there is a constant recovery rate (the number of individuals that stop being infectious per time is proportional to the number of such people);the other where the duration of the disease is constant. The results show that, for most practical purposes, these versions are qualitatively the same.

  18. New version of the web based CERN Phonebook

    CERN Multimedia

    GS Department

    2011-01-01

    A new version of CERN’s web-based phonebook will be deployed during the weekend of 17/18 December 2011. The most important new feature will be the possibility to see the CERN identity card photo of every person listed in the phonebook who has a registered photo.   The photo will be available on each person's details page and will be visible to all employed and associated members of the personnel who have the appropriate authentication (i.e. those who log in using their AIS login). More information about other new features of the release will be available from 19 December 2011 from the webpage detailing the version history of the CERN phonebook.

  19. A Comparative Study of Two Chinese Versions of Animal Farm

    Institute of Scientific and Technical Information of China (English)

    YANG Mei; CHENG Jing

    2016-01-01

    Animal Farm succeeds in establishing George Orwell’s position as a master in literature with its profound moral and hidden but killing sarcasms. And it has been translated into many languages around the world, arousing heated response. So far, there are seventeen versions in China. However, the academic studies focus on the significance of its literary value and political aspects, paying little attention to the systemic study of its translations. The thesis chooses the versions of Rong Rude and Fu Wei-ci and compares them from lexical, syntactical and discourse aspects. Through the comparative study, the author finds out that the two translators apply different translation strategies. Rong tends to adopt foreignization strategy, while Fu is inclined to ap-ply domestication strategy.

  20. Solving scheduling tournament problems using a new version of CLONALG

    Science.gov (United States)

    Pérez-Cáceres, Leslie; Riff, María Cristina

    2015-01-01

    The travelling tournament problem (TTP) is an important and well-known problem within the collective sports research community. The problem is NP-hard which makes difficult finding quality solution in short amount of time. Recently a new kind of TTP has been proposed 'The Relaxed Travelling Tournament Problem'. This version of the problem allows teams to have some days off during the tournament. In this paper, we propose an immune algorithm that is able to solve both problem versions. The algorithm uses moves which are based on the team home/away patterns. One of these moves has been specially designed for the relaxed travel tournament instances. We have tested the algorithm using well-known problem benchmarks and the results obtained are very encouraging.

  1. The Neuropsychiatric Inventory--NPI. Validation of the Danish version

    DEFF Research Database (Denmark)

    Korner, A.; Lauritzen, Lotte; Lolk, A.;

    2008-01-01

    psychiatric nurse interviewing the same caregiver. At visits 1 and 3, a psychogeriatrician assessed the participant using the ICD-10, the Geriatric Deterioration Scale (GDS) and the Clinical Global Impression (CGI) as well as the NPI in a visual analogue scale (VAS) version. These scores were blindly......Assessment of neuropsychiatric symptoms in dementia has great clinical importance. The aim of the study was validation of the Danish version of the NPI, using assessments of 72 demented and 29 non-demented of age 65+ years and their caregivers at three visits. The NPI was administered by the same...... converted into scores equalling the frequency and severity of the NPI by one of the investigators. Data analysis comprised inter-rater reliabilities (intra-class coefficients, ICC); NPI scores and corresponding VAS scores were compared using Spearman's correlation coefficients. NPI scores at visits 1 and 2...

  2. Verification and validation of RADMODL Version 1.0

    Energy Technology Data Exchange (ETDEWEB)

    Kimball, K.D.

    1993-03-01

    RADMODL is a system of linked computer codes designed to calculate the radiation environment following an accident in which nuclear materials are released. The RADMODL code and the corresponding Verification and Validation (V&V) calculations (Appendix A), were developed for Westinghouse Savannah River Company (WSRC) by EGS Corporation (EGS). Each module of RADMODL is an independent code and was verified separately. The full system was validated by comparing the output of the various modules with the corresponding output of a previously verified version of the modules. The results of the verification and validation tests show that RADMODL correctly calculates the transport of radionuclides and radiation doses. As a result of this verification and validation effort, RADMODL Version 1.0 is certified for use in calculating the radiation environment following an accident.

  3. CHIANTI - An atomic database for Emission Lines. Version 8

    CERN Document Server

    Del Zanna, G; Young, P R; Landi, E; Mason, H E

    2015-01-01

    We present version 8 of the CHIANTI database. This version includes a large amount of new data and ions, which represent a significant improvement in the soft X-ray, EUV and UV spectral regions, which several space missions currently cover. New data for neutrals and low charge states are also added. The data are assessed, but to improve the modelling of low-temperature plasma the effective collision strengths for most of the new datasets are not spline-fitted as previously, but are retained as calculated. This required a change of the format of the CHIANTI electron excitation files. The format of the energy files has also been changed. Excitation rates between all the levels are retained for most of the new datasets, so the data can in principle be used to model high-density plasma. In addition, the method for computing the differential emission measure used in the CHIANTI software has been changed.

  4. Accelerated Leach Testing of GLASS: ALTGLASS Version 3.0

    Energy Technology Data Exchange (ETDEWEB)

    Trivelpiece, Cory L. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Jantzen, Carol M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Crawford, Charles L. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-12-31

    The Accelerated Leach Testing of GLASS (ALTGLASS) database is a collection of data from short- and long-term product consistency tests (PCT, ASTM C1285 A and B) on high level waste (HLW) as well as low activity waste (LAW) glasses. The database provides both U.S. and international researchers with an archive of experimental data for the purpose of studying, modeling, or validating existing models of nuclear waste glass corrosion. The ALTGLASS database is maintained and updated by researchers at the Savannah River National Laboratory (SRNL). This newest version, ALTGLASS Version 3.0, has been updated with an additional 503 rows of data representing PCT results from corrosion experiments conducted in the United States by the Savannah River National Laboratory, Pacific Northwest National Laboratory, Argonne National Laboratory, and the Vitreous State Laboratory (SRNL, PNNL, ANL, VSL, respectively) as well as the National Nuclear Laboratory (NNL) in the United Kingdom.

  5. UTM TCL 2.0 Software Version Description (SVD) Document

    Science.gov (United States)

    Mcguirk, Patrick

    2017-01-01

    This is the Unmanned Aircraft Systems (UAS) Traffic Management (UTM) Technical Capability Level(TCL) 2.0 Software Version Description (SVD) document. This UTM TCL 2.0 SVD describes the following four topics: 1. Software Release Contents: A listing of the files comprising this release 2. Installation Instructions: How to install the release and get it running 3. Changes Since Previous Release: General updates since the previous UTM release 4. Known Issues: Known issues and limitations in this release

  6. The National Energy Audit (NEAT) Engineering Manual (Version 6)

    Energy Technology Data Exchange (ETDEWEB)

    Gettings, M.B.

    2001-04-20

    Government-funded weatherization assistance programs resulted from increased oil prices caused by the 1973 oil embargo. These programs were instituted to reduce US consumption of oil and help low-income families afford the increasing cost of heating their homes. In the summer of 1988, Oak Ridge National Laboratory (ORNL) began providing technical support to the Department of Energy (DOE) Weatherization Assistance Program (WAP). A preliminary study found no suitable means of cost-effectively selecting energy efficiency improvements (measures) for single-family homes that incorporated all the factors seen as beneficial in improving cost-effectiveness and usability. In mid-1989, ORNL was authorized to begin development of a computer-based measure selection technique. In November of 1992 a draft version of the program was made available to all WAP state directors for testing. The first production release, Version 4.3, was made available in october of 1993. The Department of Energy's Weatherization Assistance Program has continued funding improvements to the program increasing its user-friendliness and applicability. initial publication of this engineering manual coincides with availability of Version 6.1, November 1997, though algorithms described generally apply to all prior versions. Periodic updates of specific sections in the manual will permit maintaining a relevant document. This Engineering Manual delineates the assumptions used by NEAT in arriving at the measure recommendations based on the user's input of the building characteristics. Details of the actual data entry are available in the NEAT User's Manual (ORNL/Sub/91-SK078/1) and will not be discussed in this manual.

  7. Validity and Reliability of Agoraphobic Cognitions Questionnaire-Turkish Version

    Directory of Open Access Journals (Sweden)

    Ayşegül KART

    2013-11-01

    Full Text Available Validity and Reliability of Agoraphobic Cognitions Questionnaire-Turkish Version Objective: The aim of this study is to investigate the validity and reliability of Agoraphobic Cognitions Questionnaire -Turkish Version (ACQ. Method: ACQ was administered to 92 patients with agoraphobia or panic disorder with agoraphobia. BSQ Turkish version completed by translation, back-translation and pilot assessment. Reliability of ACQ was analyzed by test-retest correlation, split-half technique, Cronbach’s alpha coefficient. Construct validity was evaluated by factor analysis after the Kaiser-Meyer-Olkin (KMO and Bartlett test had been performed. Principal component analysis and varimax rotation used for factor analysis. Results: 64% of patients evaluated in the study were female and 36% were male. Age interval was between 18 and 58, mean age was 31.5±10.4. The Cronbach’s alpha coefficient was 0.91. Analysis of test-retest evaluations revealed that there were statistically significant correlations ranging between 24% and 84% concerning questionnaire components. In analysis performed by split-half method reliability coefficients of half questionnaires were found as 0.77 and 0.91. Again Spearmen-Brown coefficient was found as 0.87 by the same analysis. To assess construct validity of ACQ, factor analysis was performed and two basic factors found. These two factors explained 57.6% of the total variance. (Factor 1: 34.6%, Factor 2: 23% Conclusion: Our findings support that ACQ-Turkish version had a satisfactory level of reliability and validity

  8. A version of Hill's lemma for Cosserat continuum

    Institute of Scientific and Technical Information of China (English)

    Xikui Li; Qipeng Liu

    2009-01-01

    On the basis of Hill's lemma for classical Cauchy continuum, a version of Hill's lemma for micro-macro homogenization modeling of heterogeneous Cosserat continuum is presented in the frame of average-field theory. The admissible boundary conditions required to prescribe on the representative volume element for the modeling are extracted and discussed to ensure the satisfaction of HillMandel energy condition and the first-order average field theory.

  9. SHAKER Version 0.0/5 Pre-release Notes

    CERN Document Server

    CERN. Geneva

    1993-01-01

    SHAKER V0.0/5 is a pre-release of a simple cocktail central rapidity phase space event generator developed for the simulation of LHC Heavy Ion events. A modified version of JETSET 7.3 (the / LUJETS / common has been enlarged to 50000 particles and the LUEDIT routine has been modified to rearrange the particle weights vectors when called with MEDIT=1) is used to manage the events. All event information is included in / LUJETS / according to Lund conventions [1].

  10. AF-GEOSpace Version 2.5: Space Environment Software

    Science.gov (United States)

    Hilmer, R. V.; Hall, T.; Roth, C.; Ling, A.; Ginet, G. P.; Madden, D.

    2010-12-01

    AF-GEOSpace is a graphics-intensive software program with space environment models and applications developed by the Space Weather Center of Excellence at AFRL. The software addresses a wide range of physical domains, e.g., solar disturbance propagation, geomagnetic field and radiation belt configurations, auroral particle precipitation, and ionospheric scintillation. AF-GEOSpace has become a platform for developing and prototyping space weather visualization products. The new AF-GEOSpace Version 2.5 (release scheduled for 2010) expands on the content of Version 2.1 by including modules addressing the following new topics: (1) energetic proton maps for the South Atlantic Anomaly (from Ginet et al. [2007]), (2) GPS scintillation outage simulation tools, (3) magnetopause location determination (Shue et al. [1998]), (4) a plasmasphere model (Global Core Plasma Model, 2009 version based on Gallagher et al. [2000]), (5) a standard ionospheric model (International Reference Ionosphere 2007), (6) the CAMMICE/MICS model of inner magnetosphere plasma population (based on Roeder et al. [2005]), (7) magnetic field models (e.g., Tsyganenko and Sitnov [2005]), and (8) loading and displaying externally-produced 3D gridded data sets within AF-GEOSpace. Improvements to existing Version 2.1 capabilities include: (1) a 2005 update to the geomagnetic cutoff rigidity model of Smart and Shea [2003], (2) a 2005 update to the ionospheric scintillation Wide-Band Model (WBMOD) of Secan and Bussey [1994], and (3) improved magnetic field flux mapping options for the existing set of AF-GEOSpace radiation belt models. A basic review of these new AF-GEOSpace capabilities will be provided. To obtain a copy of the software, please contact the first author.

  11. Adolescents’ Self-concept Short Scale: A version of PHCSCS

    OpenAIRE

    Veiga, Feliciano; Leite, António

    2016-01-01

    Problem Statement: The adolescents’ self-concept has remained as a powerful issue in educational context. The lack of assessment instruments, especially in shorted version and with studied psychometric characteristics, has constituted a problem. Purpose of Study: This study presents the construction of “Adolescents’ Self-concept Short Scale” (ASCSS), using the Portuguese adaptation (Veiga & Domingues, 2012) of the Piers-Harris Children's Self-Concept Scale (Piers & Hertzberg, 2002). Res...

  12. Classic metaphyseal lesion following external cephalic version and cesarean section

    Energy Technology Data Exchange (ETDEWEB)

    Lysack, John T.; Soboleski, Don [Department of Diagnostic Radiology, Queen' s University, Kingston General Hospital, 76 Stuart Street, K7L 2V7, Kingston, Ont. (Canada)

    2003-06-01

    We report a case of an otherwise healthy neonate diagnosed at birth with a classic metaphyseal lesion of the proximal tibia following external cephalic version for frank breech presentation and a subsequent urgent cesarean section. Although the classic metaphyseal lesion is considered highly specific for infant abuse, this case demonstrates the importance of obtaining a history of obstetric trauma for neonates presenting to the imaging department for suspected non-accidental injury. (orig.)

  13. [Psychometric properties of the Hungarian version of the Codependence Questionnaire].

    Science.gov (United States)

    Nagy, Anikó; Knapek, Éva; Balázs, Katalin; Kuritárné Szabó, Ildikó

    2014-01-01

    The purpose of this study is to assess the internal consistency of the subscales of the Hungarian Version of the Codependent Questionnaire (CdQ, Roehling & Gaumond, 1996). Thus, a reliable measurement of codependency for professionals become available in Hungary. The Hungarian Version of the Codependent Questionnaire enables professionals to identify codependent individuals. Our sample (N=137) was recruited from the general population and from self-help groups (82 individuals); and patients with borderline personality disorder (55 individuals) were recruited as clinical control group. The reliability of the questionnaire was assessed by Cronbach's alfa and principal component analysis. In addition, in order to investigate the latent structure, factors analyses and hierarchical cluster analysis were used. Based on our results, the Cronbach's alfa values of the subscales of 'control', 'reliability' and 'intimacy' indicate appropriate reliability, however, the subscale of 'enmeshment' indicates poor reliability. The originally assumed factor structure is not supported by the results of the statistical analyses. The subscales are not separate from each other, which is also indicated by the correlations of the total scores of the subscales. The reliability of the Hungarian Version of the Codependent Questionnaire is nearly identical to the original data, except for one subscale ('enmeshment subscale'). Based on these results the Hungarian Version of the Codependent Questionnaire is considered to be reliable. Besides the Hungarian adaptation, the strength of this study is the investigation of a clinical sample. The use of the questionnaire is recommended without the subscale of 'enmeshment' and further 5 items, and it is suggested to use as one scale.

  14. Multi-dimensional versions of a formula of Popoviciu

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    In this paper, an explicit formulation for multivariate truncated power functions of degree one is given firstly. Based on multivariate truncated power functions of degree one, a formulation is presented which counts the number of non-negative integer solutions of s×(s + 1) linear Diophantine equations and it can be considered as a multi-dimensional versions of the formula counting the number of non-negative integer solutions of ax + by = n which is given by Popoviciu in 1953.

  15. Multi-dimensional versions of a formula of Popoviciu

    Institute of Scientific and Technical Information of China (English)

    Zhi-qiang XU

    2007-01-01

    In this paper, an explicit formulation for multivariate truncated power functions of degree one is given firstly. Based on multivariate truncated power functions of degree one, a formulation is presented which counts the number of non-negative integer solutions of s × (s + 1) linear Diophantine equations and it can be considered as a multi-dimensional versions of the formula counting the number of non-negative integer solutions of ax + by = n which is given by Popoviciu in 1953.

  16. On Functional Equivalence in the English version of Leiyu

    Institute of Scientific and Technical Information of China (English)

    王飞娟; 许焕荣

    2014-01-01

    In drama translation, both performability and the individual characteristics of the work should be given adequate con-sideration. This paper applies the Functional Equivalence Theory to analyzing Thunderstorm, the English version of Leiyu, a fa-mous Chinese play, converting some unique features of the Chinese original into their English equivalents on linguistic, cultural and stylistic levels without affecting the performability of the drama.

  17. “Dreamlike Lijiang”-New Version,New Look

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The new version of“Dreamlike Lijiang”is now on stage with a brand-new appearance in Guilin,Guangxi,China. The show has been performing successfully over four years so far! As a leading role in the local show market,“Dreamlike Lijiang”has become a successful quintessence during the last four years,with its popularity and the applause from the audiences.As a famous brand in show industry,“Dreamlike

  18. A 1D version of EllipSys

    DEFF Research Database (Denmark)

    van der Laan, Paul; Sørensen, Niels N.

    2017-01-01

    A one-dimensional version of EllipSys, labeled as EllipSys1D is presented. Three atmospheric boundary layer test cases are used to show that results of EllipSys1D are exactly the same or very similar as results of EllipSys3D, while EllipSys1D uses 3 to 4 orders of magnitude less CPU hours compared...

  19. Georgian version of the "Oral Health Impact Profile".

    Science.gov (United States)

    Kachkachishvili, I D

    2013-05-01

    The aim of the present study was to survey the validation of the Georgian version of "Oral Health Impact Profile" (OHIP). Initial testing of questionnaire showed that the all questions are understood by the patients. Survey, which was conducted with the help of the Georgian version of quality of life questionnaire, showed that received results are directed related to the progress of chronic parodontitis; during the aggravation period there is the worse quality of life than those in remission. It was confirmed that the Georgian version of the questionnaire reflects the objective side of the disease. The influence of the objective and subjective parameters on the quality of life show the average power ratios of positive correlation received by us between the quality of life and main clinical index, which is typical for parodontitis progress (CPI). During improving the clinical picture of the disease there is revealed the reduction of both, the CPI and the number of scores. Numerous studies have shown that the OHIP questionnaire was tested and accepted in different countries of the world, but until recently there were no Georgian version of the questionnaire. Questionnaire (OHIP) contains only 14 questions, which gives the patient an opportunity to quickly complete it, and the doctor - to quickly assess the results of the application. The data obtained can be used as a treatment planning, as well as during provided examination of the quality of the medical services. Based on the obtained data, we can plan not only therapeutic measures, but also to identify the need of psychological help of patients.

  20. IDC System Specification Document Version 1.1.

    Energy Technology Data Exchange (ETDEWEB)

    Harris, James M.; Lober, Randall R.

    2015-02-01

    This document contains the system specifications derived to satisfy the system requirements found in the IDC System Requirements Document for the IDC Reengineering Phase 2 project. Revisions Version Date Author/Team Revision Description Authorized by V1.0 12/2014 IDC Reengineering Project Team Initial delivery M. Harris V1.1 2/2015 IDC Reengineering Project Team Iteration I2 Review Comments M. Harris

  1. AISIM (Automated Interactive Simulation Modeling System) VAX Version Training Manual.

    Science.gov (United States)

    1985-02-01

    AD-Ri6t 436 AISIM (RUTOMATED INTERACTIVE SIMULATION MODELING 1/2 SYSTEM) VAX VERSION TRAI (U) HUGHES AIRCRAFT CO FULLERTON CA GROUND SYSTEMS GROUP S...Continue on reverse if necessary and Identify by block number) THIS DOCUMENT IS THE TRAINING MANUAL FOR THE AUTOMATED INTERACTIVE SIMULATION MODELING SYSTEM...form. Page 85 . . . . . . . . APPENDIX B SIMULATION REPORT FOR WORKING EXAMPLE Pa jPage.8 7AD-Ai6i 46 ISIM (AUTOMATED INTERACTIVE SIMULATION MODELING 2

  2. Fast Scattering Code (FSC) User's Manual: Version 2

    Science.gov (United States)

    Tinetti, Ana F.; Dun, M. H.; Pope, D. Stuart

    2006-01-01

    The Fast Scattering Code (version 2.0) is a computer program for predicting the three-dimensional scattered acoustic field produced by the interaction of known, time-harmonic, incident sound with aerostructures in the presence of potential background flow. The FSC has been developed for use as an aeroacoustic analysis tool for assessing global effects on noise radiation and scattering caused by changes in configuration (geometry, component placement) and operating conditions (background flow, excitation frequency).

  3. The NJOY Nuclear Data Processing System, Version 2016

    Energy Technology Data Exchange (ETDEWEB)

    Macfarlane, Robert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Muir, Douglas W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Boicourt, R. M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Kahler, III, Albert Comstock [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Conlin, Jeremy Lloyd [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-01-09

    The NJOY Nuclear Data Processing System, version 2016, is a comprehensive computer code package for producing pointwise and multigroup cross sections and related quantities from evaluated nuclear data in the ENDF-4 through ENDF-6 legacy card-image formats. NJOY works with evaluated files for incident neutrons, photons, and charged particles, producing libraries for a wide variety of particle transport and reactor analysis codes.

  4. Mood disorders insight scale: Validation of Persian version

    Directory of Open Access Journals (Sweden)

    Hajar Ahmadi Vazmalaei

    2012-01-01

    Full Text Available Background: Lack of insight in patients with bipolar I disorder has been associated with poor course and clinical outcome and compromised therapeutic compliance. Therefore, it is important to evaluate insight and use more specialized scales such as Mood Disorder Insight Scale (MDIS in these patients. Our objective in this study was to assess validity and reliability of Persian version of MDIS. Materials and Methods: A hundred forty five bipolar patients were selected from Iran Hospital of Psychiatry. They were interviewed by The Persian Structured Clinical Interview for Diagnostic and Statistical Manual of Mental Disorder, 4th edition′s (DSM-IV axis I disorders (SCID-I and the Scale to Assess Unawareness of Mental Disorder (SUMD. The translated version of MDIS in Persian was subsequently completed by patients. Results: The internal consistency was satisfactory (Cronbach alpha coefficients = 0.8. The test-retest reliability (coefficient alpha was 0.95 (p < 0.01. Construct validity and concurrent validity were supported by factor analysis and Spearman rank correlation between MDIS and SUMD (0.85. Conclusions: Persian version of the MDIS could be a useful instrument for assessing insight in patients with bipolar I disorder.

  5. Validation of Gujarati Version of ABILOCO-Kids Questionnaire.

    Science.gov (United States)

    Diwan, Shraddha; Diwan, Jasmin; Patel, Pankaj; Bansal, Ankita B

    2015-10-01

    ABILOCO-Kids is a measure of locomotion ability for children with cerebral palsy (CP) aged 6 to 15 years & is available in English & French. To validate the Gujarati version of ABILOCO-Kids questionnaire to be used in clinical research on Gujarati population. ABILOCO-Kids questionnaire was translated into Gujarati from English using forward-backward-forward method. To ensure face & content validity of Gujarati version using group consensus method, each item was examined by group of experts having mean experience of 24.62 years in field of paediatric and paediatric physiotherapy. Each item was analysed for content, meaning, wording, format, ease of administration & scoring. Each item was scored by expert group as either accepted, rejected or accepted with modification. Procedure was continued until 80% of consensus for all items. Concurrent validity was examined on 55 children with Cerebral Palsy (6-15 years) of all Gross Motor Functional Classification System (GMFCS) level & all clinical types by correlating score of ABILOCO-Kids with Gross Motor Functional Measure & GMFCS. In phase 1 of validation, 16 items were accepted as it is; 22 items accepted with modification & 3 items went for phase 2 validation. For concurrent validity, highly significant positive correlation was found between score of ABILOCO-Kids & total GMFM (r=0.713, pGujarati translated version of ABILOCO-Kids questionnaire has good face & content validity as well as concurrent validity which can be used to measure caregiver reported locomotion ability in children with CP.

  6. Trigonometric version of quantum–classical duality in integrable systems

    Energy Technology Data Exchange (ETDEWEB)

    Beketov, M., E-mail: beketov@phystech.edu [MIPT, Inststitutskii per. 9, 141700, Dolgoprudny, Moscow region (Russian Federation); Liashyk, A., E-mail: a.liashyk@gmail.com [National Research University Higher School of Economics, Myasnitskaya str. 20, 101000, Moscow (Russian Federation); BITP, Metrolohichna str. 14-b, 03680, Kiev (Ukraine); Zabrodin, A., E-mail: zabrodin@itep.ru [National Research University Higher School of Economics, Myasnitskaya str. 20, 101000, Moscow (Russian Federation); Institute of Biochemical Physics, Kosygina str. 4, 119991, Moscow (Russian Federation); ITEP, Bolshaya Cheremushkinskaya str. 25, 117218, Moscow (Russian Federation); Zotov, A., E-mail: zotov@mi.ras.ru [Steklov Mathematical Institute, RAS, Gubkina str. 8, 119991, Moscow (Russian Federation); ITEP, Bolshaya Cheremushkinskaya str. 25, 117218, Moscow (Russian Federation); MIPT, Inststitutskii per. 9, 141700, Dolgoprudny, Moscow region (Russian Federation)

    2016-02-15

    We extend the quantum–classical duality to the trigonometric (hyperbolic) case. The duality establishes an explicit relationship between the classical N-body trigonometric Ruijsenaars–Schneider model and the inhomogeneous twisted XXZ spin chain on N sites. Similarly to the rational version, the spin chain data fixes a certain Lagrangian submanifold in the phase space of the classical integrable system. The inhomogeneity parameters are equal to the coordinates of particles while the velocities of classical particles are proportional to the eigenvalues of the spin chain Hamiltonians (residues of the properly normalized transfer matrix). In the rational version of the duality, the action variables of the Ruijsenaars–Schneider model are equal to the twist parameters with some multiplicities defined by quantum (occupation) numbers. In contrast to the rational version, in the trigonometric case there is a splitting of the spectrum of action variables (eigenvalues of the classical Lax matrix). The limit corresponding to the classical Calogero–Sutherland system and quantum trigonometric Gaudin model is also described as well as the XX limit to free fermions.

  7. SLR-PLUS version 1.0 user's manual

    Science.gov (United States)

    Hill, J. M.

    1982-11-01

    Version 1.0 of Solar Load Ratio heating plus cooling (SLR-PLUS), developed as an advanced passive solar system design and evaluation tool, is discussed. SLR-PLUS maintains the friendly user interface structure developed for the active solar system FCHART program. Users familiar with the FCHART programs and the FCHART/SLR program will find the operation of the SLR-PLUS program very familiar SLR-PLUS differs significantly from its parent program in three major ways. First, SLR-PLUS is strictly for the evaluation of passive solar energy systems. Second, the latest correlations from the Los Alamos National Laboratory serve as the basis to the passive heating analysis used by SLR-PLUS. Finally, SLR-PLUS includes cooling loads imposed by passive systems in the form of an annual cooling load for the building modelled and for the individual passive systems. The present version was developed on an Hewlett-Packard 1000 minicomputer using an RTE-IVB operating system. The present version requires approximately 22K 16-bit words of core with overlays to run. The FORTRAN source code will compile with minor changes on any FORTRAN 77 compiler.

  8. Two versions of Maxwell's equations and the nature of light

    Science.gov (United States)

    Gill, Tepper L.; Zachary, Woodford W.

    2009-08-01

    In this paper, we show that there are actually two versions of Maxwell's equations. The new version is mathematically, but not physically, equivalent to the conventional form. It was missed because of an attempt to give a mathematical fix for a basic physical problem. This second formulation fixes the clock of the field source for all inertial observers. However now, the (natural definition of the effective) speed of light is no longer an invariant for all observers, but depends on the motion of the source. This approach allows us to account for radiation reaction without the Lorentz-Dirac equation, self-energy (divergence), advanced potentials or any assumptions about the structure of the source. This version has a new invariance group which, in general, is a nonlinear and nonlocal representation of the Lorentz group, and provides a natural (and unique) definition of simultaneity for all observers. We briefly review the corresponding particle mechanics. The purpose is to show that there is a (unique) clock for any closed system of physical bodies. This clock provides a unique definition of simultaneity for all events associated with the system. We then discuss our view of the photon within this theory.

  9. Trigonometric version of quantum–classical duality in integrable systems

    Directory of Open Access Journals (Sweden)

    M. Beketov

    2016-02-01

    Full Text Available We extend the quantum–classical duality to the trigonometric (hyperbolic case. The duality establishes an explicit relationship between the classical N-body trigonometric Ruijsenaars–Schneider model and the inhomogeneous twisted XXZ spin chain on N sites. Similarly to the rational version, the spin chain data fixes a certain Lagrangian submanifold in the phase space of the classical integrable system. The inhomogeneity parameters are equal to the coordinates of particles while the velocities of classical particles are proportional to the eigenvalues of the spin chain Hamiltonians (residues of the properly normalized transfer matrix. In the rational version of the duality, the action variables of the Ruijsenaars–Schneider model are equal to the twist parameters with some multiplicities defined by quantum (occupation numbers. In contrast to the rational version, in the trigonometric case there is a splitting of the spectrum of action variables (eigenvalues of the classical Lax matrix. The limit corresponding to the classical Calogero–Sutherland system and quantum trigonometric Gaudin model is also described as well as the XX limit to free fermions.

  10. Trigonometric version of quantum-classical duality in integrable systems

    Science.gov (United States)

    Beketov, M.; Liashyk, A.; Zabrodin, A.; Zotov, A.

    2016-02-01

    We extend the quantum-classical duality to the trigonometric (hyperbolic) case. The duality establishes an explicit relationship between the classical N-body trigonometric Ruijsenaars-Schneider model and the inhomogeneous twisted XXZ spin chain on N sites. Similarly to the rational version, the spin chain data fixes a certain Lagrangian submanifold in the phase space of the classical integrable system. The inhomogeneity parameters are equal to the coordinates of particles while the velocities of classical particles are proportional to the eigenvalues of the spin chain Hamiltonians (residues of the properly normalized transfer matrix). In the rational version of the duality, the action variables of the Ruijsenaars-Schneider model are equal to the twist parameters with some multiplicities defined by quantum (occupation) numbers. In contrast to the rational version, in the trigonometric case there is a splitting of the spectrum of action variables (eigenvalues of the classical Lax matrix). The limit corresponding to the classical Calogero-Sutherland system and quantum trigonometric Gaudin model is also described as well as the XX limit to free fermions.

  11. A tight quantitative version of Arrow's impossibility theorem

    CERN Document Server

    Keller, Nathan

    2010-01-01

    The well-known Impossibility Theorem of Arrow asserts that any Generalized Social Welfare Function (GSWF) with at least three alternatives, which satisfies Independence of Irrelevant Alternatives (IIA) and Unanimity and is not a dictatorship, is necessarily non-transitive. In 2002, Kalai asked whether one can obtain the following quantitative version of the theorem: For any $\\epsilon>0$, there exists $\\delta=\\delta(\\epsilon)$ such that if a GSWF on three alternatives satisfies the IIA condition and its probability of non-transitive outcome is at most $\\delta$, then the GSWF is at most $\\epsilon$-far from being a dictatorship or from breaching the Unanimity condition. In 2009, Mossel proved such quantitative version, with $\\delta(\\epsilon)=\\exp(-C/\\epsilon^{21})$, and generalized it to GSWFs with $k$ alternatives, for all $k \\geq 3$. In this paper we show that the quantitative version holds with $\\delta(\\epsilon)=C \\cdot \\epsilon^3$, and that this result is tight up to logarithmic factors. Furthermore, our res...

  12. Advanced technologies in web application design

    OpenAIRE

    Peruš, Blaž

    2016-01-01

    The main goal of this diploma thesis is a presentation of Autocommerce web project development. All used technologies are described. On the basis of the project we also present agile methodologies for software development which helps us to efficiently build the whole information system from the idea to the first version. Such methodologies are mostly used by startups, because they are perfect for building and testing products in a very short time & for adapting with the provided feedback from...

  13. Technology Innovation

    Science.gov (United States)

    EPA produces innovative technologies and facilitates their creation in line with the Agency mission to create products such as the stormwater calculator, remote sensing, innovation clusters, and low-cost air sensors.

  14. Banana technology

    Science.gov (United States)

    van Amstel, Willem D.; Schellekens, E. P. A.; Walravens, C.; Wijlaars, A. P. F.

    1999-09-01

    With 'Banana Technology' an unconventional hybrid fabrication technology is indicated for the production of very large parabolic and hyperbolic cylindrical mirror systems. The banana technology uses elastic bending of very large and thin glass substrates and fixation onto NC milled metal moulds. This technology has matured during the last twenty years for the manufacturing of large telecentric flat-bed scanners. Two construction types, called 'internal banana' and 'external banana; are presented. Optical figure quality requirements in terms of slope and curvature deviations are discussed. Measurements of these optical specifications by means of a 'finishing rod' type of scanning deflectometer or slope tester are presented. Design constraints for bending glass and the advantages of a new process will be discussed.

  15. Exploration technology

    Energy Technology Data Exchange (ETDEWEB)

    Roennevik, H.C. [Saga Petroleum A/S, Forus (Norway)

    1996-12-31

    The paper evaluates exploration technology. Topics discussed are: Visions; the subsurface challenge; the creative tension; the exploration process; seismic; geology; organic geochemistry; seismic resolution; integration; drilling; value creation. 4 refs., 22 figs.

  16. UPLIFTING TECHNOLOGY

    National Research Council Canada - National Science Library

    Thomas K Grose

    2015-01-01

      Inspired by Star Trek turbolifts, German engineering firm ThyssenKrupp says it's ready to replace cables and pulleys using maglev, or magnetic levitation technology, that enables the world's fastest...

  17. Videodisc technology

    Energy Technology Data Exchange (ETDEWEB)

    Marsh, F.E. Jr.

    1981-03-01

    An overview of the technology of videodiscs is given. The emphasis is on systems that use reflection or transmission of laser light. Possible use of videodiscs for storage of bibliographic information is considered. 6 figures, 3 tables. (RWR)

  18. Fabrication Technology

    Energy Technology Data Exchange (ETDEWEB)

    Blaedel, K.L.

    1993-03-01

    The mission of the Fabrication Technology thrust area is to have an adequate base of manufacturing technology, not necessarily resident at Lawrence Livermore National Laboratory (LLNL), to conduct the future business of LLNL. The specific goals continue to be to (1) develop an understanding of fundamental fabrication processes; (2) construct general purpose process models that will have wide applicability; (3) document findings and models in journals; (4) transfer technology to LLNL programs, industry, and colleagues; and (5) develop continuing relationships with the industrial and academic communities to advance the collective understanding of fabrication processes. The strategy to ensure success is changing. For technologies in which they are expert and which will continue to be of future importance to LLNL, they can often attract outside resources both to maintain their expertise by applying it to a specific problem and to help fund further development. A popular vehicle to fund such work is the Cooperative Research and Development Agreement with industry. For technologies needing development because of their future critical importance and in which they are not expert, they use internal funding sources. These latter are the topics of the thrust area. Three FY-92 funded projects are discussed in this section. Each project clearly moves the Fabrication Technology thrust area towards the goals outlined above. They have also continued their membership in the North Carolina State University Precision Engineering Center, a multidisciplinary research and graduate program established to provide the new technologies needed by high-technology institutions in the US. As members, they have access to and use of the results of their research projects, many of which parallel the precision engineering efforts at LLNL.

  19. Cognitive technologies

    CERN Document Server

    Mello, Alan; Figueiredo, Fabrício; Figueiredo, Rafael

    2017-01-01

    This book focuses on the next generation optical networks as well as mobile communication technologies. The reader will find chapters on Cognitive Optical Network, 5G Cognitive Wireless, LTE, Data Analysis and Natural Language Processing. It also presents a comprehensive view of the enhancements and requirements foreseen for Machine Type Communication. Moreover, some data analysis techniques and Brazilian Portuguese natural language processing technologies are also described here. .

  20. Lasers technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-07-01

    The Laser Technology Program of IPEN is developed by the Center for Lasers and Applications (CLA) and is committed to the development of new lasers based on the research of new optical materials and new resonator technologies. Laser applications and research occur within several areas such as Nuclear, Medicine, Dentistry, Industry, Environment and Advanced Research. Additional goals of the Program are human resource development and innovation, in association with Brazilian Universities and commercial partners.

  1. Fabrication Technology

    Energy Technology Data Exchange (ETDEWEB)

    Blaedel, K.L.

    1993-03-01

    The mission of the Fabrication Technology thrust area is to have an adequate base of manufacturing technology, not necessarily resident at Lawrence Livermore National Laboratory (LLNL), to conduct the future business of LLNL. The specific goals continue to be to (1) develop an understanding of fundamental fabrication processes; (2) construct general purpose process models that will have wide applicability; (3) document findings and models in journals; (4) transfer technology to LLNL programs, industry, and colleagues; and (5) develop continuing relationships with the industrial and academic communities to advance the collective understanding of fabrication processes. The strategy to ensure success is changing. For technologies in which they are expert and which will continue to be of future importance to LLNL, they can often attract outside resources both to maintain their expertise by applying it to a specific problem and to help fund further development. A popular vehicle to fund such work is the Cooperative Research and Development Agreement with industry. For technologies needing development because of their future critical importance and in which they are not expert, they use internal funding sources. These latter are the topics of the thrust area. Three FY-92 funded projects are discussed in this section. Each project clearly moves the Fabrication Technology thrust area towards the goals outlined above. They have also continued their membership in the North Carolina State University Precision Engineering Center, a multidisciplinary research and graduate program established to provide the new technologies needed by high-technology institutions in the US. As members, they have access to and use of the results of their research projects, many of which parallel the precision engineering efforts at LLNL.

  2. Guideline for radioiodine therapy for benign thyroid diseases (version 3)

    Energy Technology Data Exchange (ETDEWEB)

    Dietlein, M.; Schicha, H. [Klinik und Poliklinik fuer Nuklearmedizin der Univ. zu Koeln (Germany); Dressler, J. [Nuklearmedizinische Klinik der Henriettenstiftung, Hannover (Germany); Gruenwald, F. [Klinik und Poliklinik fuer Nuklearmedizin der Univ. Frankfurt (Germany); Leisner, B. [Abt. fuer Nuklearmedizin des Allg. Krankenhauses St. Georg, Hamburg (Germany); Moser, E. [Abt. fuer Nuklearmedizin der Radiologischen Universitaetsklinik Freiburg (Germany); Reiners, C.; Schneider, P. [Klinik und Poliklinik fuer Nuklearmedizin der Univ. Wuerzburg (Germany); Schober, O. [Klinik und Poliklinik fuer Nuklearmedizin der Univ. Muenster (Germany)

    2004-12-01

    The version 3 of the guideline for radioiodine therapy for benign thyroid diseases presents first of all a revision of the version 2. The chapter indication for radioiodine therapy, surgical treatment or antithyroid drugs bases on an interdisciplinary consensus. The manifold criteria for decision making consider the entity of thyroid disease (autonomy, Graves' disease, goitre, goitre recurrence), the thyroid volume, suspicion of malignancy, cystic nodules, risk of surgery and co-morbidity, history of subtotal thyroidectomy, persistent or recurrent thyrotoxicosis caused by Graves' disease including known risk factors for relapse, compression of the trachea caused by goitre, requirement of direct therapeutic effect as well as the patient's preference. Because often some of these criteria are relevant, the guideline offers the necessary flexibility for individual decisions. Further topics are patients' preparation, counseling, dosage concepts, procedural details, results, side effects and follow-up care. The prophylactic use of glucocorticoids during radioiodine therapy in patients without preexisting ophthalmopathy as well as dosage and duration of glucocorticoid medication in patients with preexisting ophthalmopathy need to be clarified in further studies. The pragmatic recommendations for the combined use of radioiodine and glucocorticoids remained unchanged in the 3{sup rd} version. (orig.) [German] Die Version 3 der Leitlinie zur Radioiodtherapie (RIT) bei benignen Schilddruesenerkrankungen stellt im Wesentlichen eine redaktionelle Ueberarbeitung der Version 2 dar. Im Kapitel Indikation und Empfehlungen fuer eine Radioiodtherapie, eine Operation oder eine thyreostatische Therapie bei gutartigen Schilddruesenerkrankungen basiert die Leitlinie auf einem interdisziplinaer abgestimmten Konzept. Die Entscheidungskriterien sind multifaktoriell und beruecksichtigen die Art der Schilddruesenerkrankung (Autonomie, Morbus Basedow, Struma, Rezidivstruma

  3. COPAT - towards a recommended model version of COSMO-CLM

    Science.gov (United States)

    Anders, Ivonne; Brienen, Susanne; Eduardo, Bucchignani; Ferrone, Andrew; Geyer, Beate; Keuler, Klaus; Lüthi, Daniel; Mertens, Mariano; Panitz, Hans-Jürgen; Saeed, Sajjad; Schulz, Jan-Peter; Wouters, Hendrik

    2016-04-01

    The regional climate model COSMO-CLM is a community model (www.clm-community.com). In close collaboration with the COSMO-consortium the model is further developed by the community members for climate applications. One of the tasks of the community is to give a recommendation on the model version and to evaluate the models performance. The COPAT (Coordinated Parameter Testing) is a voluntary community effort to allow different institutions to carry out model simulations systematically by different institutions in order to test new model options and to find a satisfactory model setup for hydrostatic climate simulations over Europe. We will present the COPAT method used to achieve the latest recommended model version of COSMO-CLM (COSMO5.0_clm6). The simulations cover the EURO-CORDEX domain at two spatial resolutions 0.44° and 0.11°. They used ERAinterim forcing data for the time period of 1979-2000. Interpolated forcing data has been prepared once to ensure that all participating groups used identical forcing. The evaluation of each individual run has been performed for the time period 1981-2000 by using ETOOL and ETOOL-VIS. These tools have been developed within the community to evaluate standard COSMO-CLM output in comparison to observations provided by EOBS and CRU. COPAT was structured in three phases. In Phase 1 all participating institutions performed a reference run on their individual computing platforms and tested the influence of single model options on the results afterwards. Derived from the results of Phase 1 the most promising options were used in combinations in the second phase (Phase 2). These first two phases of COPAT consist of more than 100 simulations with a spatial resolution of 0.44°. Based on the best setup identified in Phase 2 a calibration of eight tuning parameters has been carried out following Bellbrat et al. (2012) in Phase 3. A final simulation with the calibrated parameters has been set up at a higher resolution of 0.11°. The

  4. Traduire Flaubert : Madame Bovary en version roumaine

    Directory of Open Access Journals (Sweden)

    Florica Courriol

    2012-02-01

    Full Text Available Cette communication est le résultat d'une analyse traductionnelle visant à réévaluer une version roumaine de Madame Bovary des années soixante-dix (Doamna Bovary traduit par Demostene Botez à travers le travail concret sur le texte avec les étudiants d'un mastère. De multiples anomalies ayant été ainsi décelées, j'ai été amenée à retraduire ce grand classique. Il m'a semblé profitable à la recherche flaubertienne d'exposer les difficultés et leurs résolutions, d'ordre purement linguistique ou civilisationnel, que l'on se place sur le plan de la lecture (compréhension du texte ou sur celui du rendu dans la langue d'arrivée. Le choix des points litigieux ne se limite pas au simple discours mais touche aussi à la problématique des noms propres (peut-on les traduire ? faut-il avoir recours aux fameuses notes de traducteur ? et, en conséquence logique, à celle du titre. Les exemples concrets viennent étayer une pratique traduisante et la mettre en relation avec la critique, l'histoire littéraire et la création flaubertienne dans son ensemble.I intend to address in this paper the concrete problems I encountered when translating into Romanian FLAUBERT’s major work, Madame Bovary. First of all, its nature of retranslation has to be specified, since an existing version, published in the 1970s by a Romanian poet (Demostene Botez, was in fact in circulation when I started working on the original text. This previous translation was probably the result of a collective operation, as the split rhythm suggests at several points. In the meantime, other publishers saw fit to print additional versions in great haste. However, a mere examination of the problematic passages is sufficient enough to realize that the authors of the new versions only limited themselves to take up the first one. They improved the text here and there, “updated” some expressions, while keeping the glaring errors of Botez’s version.

  5. ImSET: Impact of Sector Energy Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Roop, Joseph M.; Scott, Michael J.; Schultz, Robert W.

    2005-07-19

    This version of the Impact of Sector Energy Technologies (ImSET) model represents the ''next generation'' of the previously developed Visual Basic model (ImBUILD 2.0) that was developed in 2003 to estimate the macroeconomic impacts of energy-efficient technology in buildings. More specifically, a special-purpose version of the 1997 benchmark national Input-Output (I-O) model was designed specifically to estimate the national employment and income effects of the deployment of Office of Energy Efficiency and Renewable Energy (EERE) -developed energy-saving technologies. In comparison with the previous versions of the model, this version allows for more complete and automated analysis of the essential features of energy efficiency investments in buildings, industry, transportation, and the electric power sectors. This version also incorporates improvements in the treatment of operations and maintenance costs, and improves the treatment of financing of investment options. ImSET is also easier to use than extant macroeconomic simulation models and incorporates information developed by each of the EERE offices as part of the requirements of the Government Performance and Results Act.

  6. Preliminary site description. Simpevarp area - version 1.1

    Energy Technology Data Exchange (ETDEWEB)

    Winberg, Anders (ed.)

    2004-08-01

    Site characterisation in the Oskarshamn area is currently conducted at two adjoining localities, the Simpevarp and Laxemar subareas. This report presents the interim version (model version Simpevarp 1.1 of S1.1 for short) of the preliminary Site Descriptive Model for the Simpevarp subarea. The basis for this interim version is quality-assured, geoscientific and ecological field data from the Simpevarp subarea (and in part from the Laxemar area) available in the SKB SICADA and GIS data bases as of July 1, 2003 as well as version 0 of the Site Descriptive Model. The new data collected during the initial site investigation phase up till the date of data freeze S1.1 constitute the basis for the update of version 0 to version S1.1. These data include results from surface investigations in the subarea with its regional environment and from drillings and investigations in boreholes. The surface-based data sets were, in a relative sense, extensive compared with data sets from boreholes, were the information largely was limited to information from one c. 1,000 m deep cored borehole (KSH01A), two existing cored boreholes and three c. 200 m deep percussion-drilled boreholes. Discipline-specific models are developed for the selected regional and local model volumes and these models are subsequently integrated into a unified site description. The current methodologies for developing discipline-specific models and their integration are documented in methodology/ strategy reports. In the present work, the procedures and guidelines given in those reports were followed to the extent possible given the data and information available at the time of data freeze for model version S1.1. Compared with version 0 there are considerable additional features in the version S1.1, especially in the geological description and in the description of the near surface. The geological models of lithology and deformation zones are based on borehole information and surface data of much higher

  7. Preliminary site description Forsmark area - version 1.1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-03-01

    This report presents the interim version (model version 1.1) of the preliminary Site Descriptive Model for Forsmark. The basis for this interim version is quality-assured, geoscientific and ecological field data from Forsmark that were available in the SKB databases SICADA and GIS at April 30, 2003 as well as version 0 of the Site Descriptive Model. The new data acquired during the initial site investigation phase to the date of data freeze 1.1 constitute the basis for the updating of version 0 to version 1.1. These data originate from surface investigations on the candidate area with its regional environment and from drilling and investigations in boreholes. The surface-based data sets were rather extensive whereas the data sets from boreholes were limited to information from one 1,000 m deep cored borehole (KFM01A) and eight 150 to 200 m deep percussion-drilled boreholes in the Forsmark candidate area. Discipline specific models are developed for a selected regional and local model volume and these are then integrated into a site description. The current methodologies for developing the discipline specific models and the integration of these are documented in methodology reports or strategy reports. In the present work, the guidelines given in those reports were followed to the extent possible with the data and information available at the time for data freeze for model version 1.1. Compared with version 0 there are considerable additional features in the version 1.1, especially in the geological description and in the description of the near surface. The geological models of lithology and deformation zones are based on borehole information and much higher resolution surface data. The existence of highly fractured sub-horizontal zones has been verified and these are now part of the model of the deformation zones. A discrete fracture network (DFN) model has also been developed. The rock mechanics model is based on strength information from SFR and an empirical

  8. Preliminary site description. Simpevarp area - version 1.1

    Energy Technology Data Exchange (ETDEWEB)

    Winberg, Anders (ed.)

    2004-08-01

    Site characterisation in the Oskarshamn area is currently conducted at two adjoining localities, the Simpevarp and Laxemar subareas. This report presents the interim version (model version Simpevarp 1.1 of S1.1 for short) of the preliminary Site Descriptive Model for the Simpevarp subarea. The basis for this interim version is quality-assured, geoscientific and ecological field data from the Simpevarp subarea (and in part from the Laxemar area) available in the SKB SICADA and GIS data bases as of July 1, 2003 as well as version 0 of the Site Descriptive Model. The new data collected during the initial site investigation phase up till the date of data freeze S1.1 constitute the basis for the update of version 0 to version S1.1. These data include results from surface investigations in the subarea with its regional environment and from drillings and investigations in boreholes. The surface-based data sets were, in a relative sense, extensive compared with data sets from boreholes, were the information largely was limited to information from one c. 1,000 m deep cored borehole (KSH01A), two existing cored boreholes and three c. 200 m deep percussion-drilled boreholes. Discipline-specific models are developed for the selected regional and local model volumes and these models are subsequently integrated into a unified site description. The current methodologies for developing discipline-specific models and their integration are documented in methodology/ strategy reports. In the present work, the procedures and guidelines given in those reports were followed to the extent possible given the data and information available at the time of data freeze for model version S1.1. Compared with version 0 there are considerable additional features in the version S1.1, especially in the geological description and in the description of the near surface. The geological models of lithology and deformation zones are based on borehole information and surface data of much higher

  9. "Cross-Cultural Adaptation and Psychometric Evaluation of the Turkish Version of the Cancer Behavior Inventory-Brief Version".

    Science.gov (United States)

    Iyigun, Emine; Tastan, Sevinc; Gezginci, Elif; Korkmaz, Serap; Demiral, Selcuk; Beyzadeoglu, Murat

    2017-08-11

    Cancer Behavior Inventory-Brief Version is a simple and non-burdensome tool used to evaluate the self-efficacy of the cancer patients. The aim of this study was to examine the psychometric properties of the Turkish version of the Cancer Behavior Inventory-Brief Version. This methodological study was conducted on 143 cancer patients who received radiotherapy at the Department of Radiation Oncology at a Training and Research Hospital in Turkey. Data were collected using Medical and Demographic Information Form, Cancer Behavior Inventory-Brief Version (CBI-B), Satisfaction with Life Scale (SWLS), and EORTC QLQ-C30. Descriptive statistics, Exploratory Factor Analysis, correlation coefficients were used for the analysis of data. Exploratory Factor Analysis confirmed four-factor structure explaining 74.7% of the total variance: (1) Maintaining Independence and Positive Attitude; (2) Participating in Medical Care; (3) Coping and Stress Management; and (4) Managing Affect. The CBI-B had acceptable internal consistency (Cronbach's α= 0.87) and test-retest reliability (intraclass correlation coefficient= 0.961) and concurrent validity with SWLS and EORTC QLQ-C30 scores. The measures of life satisfaction and quality of life were positively correlated with CBI-B whereas the symptom levels and the functions (with the exception of the role function) were negatively correlated. The CBI-B was found to be a valid and reliable inventory for assessing the self-efficacy of Turkish cancer patients. The CBI-B, is a simple and brief measure of self-efficacy for coping with cancer, could be easily used in clinical and research settings. Copyright © 2017. Published by Elsevier Inc.

  10. Technology and technology transfer: some basic issues

    OpenAIRE

    Shamsavari, Ali; Adikibi, Owen; Taha, Yasser

    2002-01-01

    This paper addresses various issues relating to technology and transfer of technology such as technology and society, technology and science, channels and models of technology transfer, the role of multinational companies in transfer of technology, etc. The ultimate objective is to pose the question of relevance of some existing models and ideas like technological independence in an increasingly globalised world economy.

  11. Portuguese version of the PTSD Checklist-Military Version (PCL-M)-I: Confirmatory Factor Analysis and reliability.

    Science.gov (United States)

    Carvalho, Teresa; Cunha, Marina; Pinto-Gouveia, José; Duarte, Joana

    2015-03-30

    The PTSD Checklist-Military Version (PCL-M) is a brief self-report instrument widely used to assess Post-traumatic Stress Disorder (PTSD) symptomatology in war Veterans, according to DSM-IV. This study sought out to explore the factor structure and reliability of the Portuguese version of the PCL-M. A sample of 660 Portuguese Colonial War Veterans completed the PCL-M. Several Confirmatory Factor Analyses were conducted to test different structures for PCL-M PTSD symptoms. Although the respecified first-order four-factor model based on King et al.'s model showed the best fit to the data, the respecified first and second-order models based on the DSM-IV symptom clusters also presented an acceptable fit. In addition, the PCL-M showed adequate reliability. The Portuguese version of the PCL-M is thus a valid and reliable measure to assess the severity of PTSD symptoms as described in DSM-IV. Its use with Portuguese Colonial War Veterans may ease screening of possible PTSD cases, promote more suitable treatment planning, and enable monitoring of therapeutic outcomes. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  12. Technology-Aided Pictorial Cues to Support the Performance of Daily Activities by Persons with Moderate Alzheimer's Disease

    Science.gov (United States)

    Lancioni, Giulio E.; Perilli, Viviana; Singh, Nirbhay N.; O'Reilly, Mark F.; Sigafoos, Jeff; Cassano, Germana; Pinto, Katia; Minervini, Mauro G.; Oliva, Doretta

    2012-01-01

    We developed a technology-aided intervention strategy relying on pictorial cues alone or in combination with verbal instructions and assessed these two versions of the strategy with three persons with moderate Alzheimer's disease. In Section I of the study, the strategy version with pictorial cues plus verbal instructions was compared with an…

  13. TOUGHREACT Version 2.0: A simulator for subsurface reactive transport under non-isothermal multiphase flow conditions

    Energy Technology Data Exchange (ETDEWEB)

    Xu, T.; Spycher, N.; Sonnenthal, E.; Zhang, G.; Zheng, L.; Pruess, K.

    2010-08-01

    TOUGHREACT is a numerical simulation program for chemically reactive non-isothermal flows of multiphase fluids in porous and fractured media, and was developed by introducing reactive chemistry into the multiphase fluid and heat flow simulator TOUGH2 V2. The first version of TOUGHREACT was released to the public through the U.S. Department of Energy's Energy Science and Technology Software Center (ESTSC) in August 2004. It is among the most frequently requested of ESTSC's codes. The code has been widely used for studies in CO{sub 2} geological sequestration, nuclear waste isolation, geothermal energy development, environmental remediation, and increasingly for petroleum applications. Over the past several years, many new capabilities have been developed, which were incorporated into Version 2 of TOUGHREACT. Major additions and improvements in Version 2 are discussed here, and two application examples are presented: (1) long-term fate of injected CO{sub 2} in a storage reservoir and (2) biogeochemical cycling of metals in mining-impacted lake sediments.

  14. East Asian Seas Regional Climatology Version 2.0 from 1804 to 2014 (NODC Accession 0123300)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The East Asian Seas Regional Climatology Version 2.0 is an update to the preliminary version released in May 2012. This update includes new temperature and salinity...

  15. Stravinsky: Symphony in E flat, Op. 1. Firebird-Suite (1919 version / Jonathan Swain

    Index Scriptorium Estoniae

    Swain, Jonathan

    1994-01-01

    Uuest heliplaadist "Stravinsky: Symphony in E flat, Op. 1. Firebird-Suite (1919 version). Royal Philharmonic Orchestra / Dalia Atlas; Symphony - comparative versions: SNO, Gibson. SRO, Järvi (2/94)(CHAN) CHAN 9236

  16. Stravinsky: Symphony in E flat, Op. 1. Firebird-Suite (1919 version / Jonathan Swain

    Index Scriptorium Estoniae

    Swain, Jonathan

    1994-01-01

    Uuest heliplaadist "Stravinsky: Symphony in E flat, Op. 1. Firebird-Suite (1919 version). Royal Philharmonic Orchestra / Dalia Atlas; Symphony - comparative versions: SNO, Gibson. SRO, Järvi (2/94)(CHAN) CHAN 9236

  17. Health effects of synfuels technology: a review

    Energy Technology Data Exchange (ETDEWEB)

    Sanathanan, L.P.; Reilly, C.A.; Marshall, S.A.; Wilzbach, K.E.

    1981-04-01

    This document contains annotated synopses of available information pertinent to health impacts of synthetic fuel technologies under development, and identifies needs for further information. The report focuses on carcinogenesis, which appears to be a special problem with coal conversion technologies. This review is intended to serve as a reference for the NEPA Affairs Division of DOE in its evaluation of the overall synthetic fuel program and specific projects in the program. Updated versions of this document are expected to be prepared annually or semiannually as new information becomes available.

  18. Simulation and Modeling Methodologies, Technologies and Applications

    CERN Document Server

    Filipe, Joaquim; Kacprzyk, Janusz; Pina, Nuno

    2014-01-01

    This book includes extended and revised versions of a set of selected papers from the 2012 International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2012) which was sponsored by the Institute for Systems and Technologies of Information, Control and Communication (INSTICC) and held in Rome, Italy. SIMULTECH 2012 was technically co-sponsored by the Society for Modeling & Simulation International (SCS), GDR I3, Lionphant Simulation, Simulation Team and IFIP and held in cooperation with AIS Special Interest Group of Modeling and Simulation (AIS SIGMAS) and the Movimento Italiano Modellazione e Simulazione (MIMOS).

  19. Technology cycles and technology revolutions

    Energy Technology Data Exchange (ETDEWEB)

    Paganetto, Luigi; Scandizzo, Pasquale Lucio

    2010-09-15

    Technological cycles have been characterized as the basis of long and continuous periods economic growth through sustained changes in total factor productivity. While this hypothesis is in part consistent with several theories of growth, the sheer magnitude and length of the economic revolutions experienced by humankind seems to indicate surmise that more attention should be given to the origin of major technological and economic changes, with reference to one crucial question: role of production and use of energy in economic development.

  20. TRASYS - THERMAL RADIATION ANALYZER SYSTEM (DEC VAX VERSION WITH NASADIG)

    Science.gov (United States)

    Anderson, G. E.

    1994-01-01

    . The flexible structure of TRASYS allows considerable freedom in the definition and choice of solution method for a thermal radiation problem. The program's flexible structure has also allowed TRASYS to retain the same basic input structure as the authors update it in order to keep up with changing requirements. Among its other important features are the following: 1) up to 3200 node problem size capability with shadowing by intervening opaque or semi-transparent surfaces; 2) choice of diffuse, specular, or diffuse/specular radiant interchange solutions; 3) a restart capability that minimizes recomputing; 4) macroinstructions that automatically provide the executive logic for orbit generation that optimizes the use of previously completed computations; 5) a time variable geometry package that provides automatic pointing of the various parts of an articulated spacecraft and an automatic look-back feature that eliminates redundant form factor calculations; 6) capability to specify submodel names to identify sets of surfaces or components as an entity; and 7) subroutines to perform functions which save and recall the internodal and/or space form factors in subsequent steps for nodes with fixed geometry during a variable geometry run. There are two machine versions of TRASYS v27: a DEC VAX version and a Cray UNICOS version. Both versions require installation of the NASADIG library (MSC-21801 for DEC VAX or COS-10049 for CRAY), which is available from COSMIC either separately or bundled with TRASYS. The NASADIG (NASA Device Independent Graphics Library) plot package provides a pictorial representation of input geometry, orbital/orientation parameters, and heating rate output as a function of time. NASADIG supports Tektronix terminals. The CRAY version of TRASYS v27 is written in FORTRAN 77 for batch or interactive execution and has been implemented on CRAY X-MP and CRAY Y-MP series computers running UNICOS. The standard distribution medium for MSC-21959 (CRAY version

  1. TRASYS - THERMAL RADIATION ANALYZER SYSTEM (CRAY VERSION WITH NASADIG)

    Science.gov (United States)

    Anderson, G. E.

    1994-01-01

    . The flexible structure of TRASYS allows considerable freedom in the definition and choice of solution method for a thermal radiation problem. The program's flexible structure has also allowed TRASYS to retain the same basic input structure as the authors update it in order to keep up with changing requirements. Among its other important features are the following: 1) up to 3200 node problem size capability with shadowing by intervening opaque or semi-transparent surfaces; 2) choice of diffuse, specular, or diffuse/specular radiant interchange solutions; 3) a restart capability that minimizes recomputing; 4) macroinstructions that automatically provide the executive logic for orbit generation that optimizes the use of previously completed computations; 5) a time variable geometry package that provides automatic pointing of the various parts of an articulated spacecraft and an automatic look-back feature that eliminates redundant form factor calculations; 6) capability to specify submodel names to identify sets of surfaces or components as an entity; and 7) subroutines to perform functions which save and recall the internodal and/or space form factors in subsequent steps for nodes with fixed geometry during a variable geometry run. There are two machine versions of TRASYS v27: a DEC VAX version and a Cray UNICOS version. Both versions require installation of the NASADIG library (MSC-21801 for DEC VAX or COS-10049 for CRAY), which is available from COSMIC either separately or bundled with TRASYS. The NASADIG (NASA Device Independent Graphics Library) plot package provides a pictorial representation of input geometry, orbital/orientation parameters, and heating rate output as a function of time. NASADIG supports Tektronix terminals. The CRAY version of TRASYS v27 is written in FORTRAN 77 for batch or interactive execution and has been implemented on CRAY X-MP and CRAY Y-MP series computers running UNICOS. The standard distribution medium for MSC-21959 (CRAY version

  2. TRASYS - THERMAL RADIATION ANALYZER SYSTEM (DEC VAX VERSION WITHOUT NASADIG)

    Science.gov (United States)

    Vogt, R. A.

    1994-01-01

    . The flexible structure of TRASYS allows considerable freedom in the definition and choice of solution method for a thermal radiation problem. The program's flexible structure has also allowed TRASYS to retain the same basic input structure as the authors update it in order to keep up with changing requirements. Among its other important features are the following: 1) up to 3200 node problem size capability with shadowing by intervening opaque or semi-transparent surfaces; 2) choice of diffuse, specular, or diffuse/specular radiant interchange solutions; 3) a restart capability that minimizes recomputing; 4) macroinstructions that automatically provide the executive logic for orbit generation that optimizes the use of previously completed computations; 5) a time variable geometry package that provides automatic pointing of the various parts of an articulated spacecraft and an automatic look-back feature that eliminates redundant form factor calculations; 6) capability to specify submodel names to identify sets of surfaces or components as an entity; and 7) subroutines to perform functions which save and recall the internodal and/or space form factors in subsequent steps for nodes with fixed geometry during a variable geometry run. There are two machine versions of TRASYS v27: a DEC VAX version and a Cray UNICOS version. Both versions require installation of the NASADIG library (MSC-21801 for DEC VAX or COS-10049 for CRAY), which is available from COSMIC either separately or bundled with TRASYS. The NASADIG (NASA Device Independent Graphics Library) plot package provides a pictorial representation of input geometry, orbital/orientation parameters, and heating rate output as a function of time. NASADIG supports Tektronix terminals. The CRAY version of TRASYS v27 is written in FORTRAN 77 for batch or interactive execution and has been implemented on CRAY X-MP and CRAY Y-MP series computers running UNICOS. The standard distribution medium for MSC-21959 (CRAY version

  3. Version 3.0 of code Java for 3D simulation of the CCA model

    Science.gov (United States)

    Zhang, Kebo; Zuo, Junsen; Dou, Yifeng; Li, Chao; Xiong, Hailing

    2016-10-01

    In this paper we provide a new version of program for replacing the previous version. The frequency of traversing the clusters-list was reduced, and some code blocks were optimized properly; in addition, we appended and revised the comments of the source code for some methods or attributes. The compared experimental results show that new version has better time efficiency than the previous version.

  4. Evaluating the Acceptability of Four Versions of a Child Sexual Abuse Prevention Program

    Science.gov (United States)

    Kopp, Brandon; Miltenberger, Raymond G.

    2009-01-01

    Fifty-nine college students used a modified version of the Treatment Evaluation Inventory-Short Form to evaluate the acceptability of four versions of a sexual abuse prevention program for 10-year-old children. The four versions include an information-based training approach or a behavioral skills training (BST) approach with a focus on strangers…

  5. A Contrastive Study on Domesticating and Foreignizing Translation of Two Versions of Hong Lou Meng

    Institute of Scientific and Technical Information of China (English)

    侯方丽; 姚青; 向凤雅

    2015-01-01

    Hong Lou Meng is one of the most famous literature works in Chinese.This paper picks two versions of Hong Lou Meng:the Yang’s domesticating translation version and the Hawks’ foreignizing translation version,focuses on the different translation methods they took,and makes a contrastive study on the translation works.

  6. A Contrastive Study on Domesticating and Foreignizing Translation of Two Versions of Hong Lou Meng

    Institute of Scientific and Technical Information of China (English)

    侯方丽; 姚青; 向凤雅

    2015-01-01

    Hong Lou Meng is one of the most famous literature works in Chinese.This paper picks two versions of Hong Lou Meng:the Yang's domesticating translation version and the Hawks' foreignizing translation version,focuses on the different translation methods they took,and makes a contrastive study on the translation works.

  7. Reliability of short form-36 in an Internet- and a pen-and-paper version

    DEFF Research Database (Denmark)

    Basnov, Maja; Kongsved, Sissel Marie; Bech, Per;

    2009-01-01

    Use of Internet versions of questionnaires may have several advantages in clinical and epidemiological research, but we know little about if Internet versions differ with respect to validity and reliability. We aimed to compare Internet- and pen-and-paper versions of short form-36 (SF-36) with re...

  8. 21 CFR 290.6 - Spanish-language version of required warning.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Spanish-language version of required warning. 290... (CONTINUED) DRUGS: GENERAL CONTROLLED DRUGS General Provisions § 290.6 Spanish-language version of required... of this drug to any person other than the patient for whom it was prescribed.” The Spanish version...

  9. Knowledge Technologies

    CERN Document Server

    Milton, Nick

    2008-01-01

    Several technologies are emerging that provide new ways to capture, store, present and use knowledge. This book is the first to provide a comprehensive introduction to five of the most important of these technologies: Knowledge Engineering, Knowledge Based Engineering, Knowledge Webs, Ontologies and Semantic Webs. For each of these, answers are given to a number of key questions (What is it? How does it operate? How is a system developed? What can it be used for? What tools are available? What are the main issues?). The book is aimed at students, researchers and practitioners interested in Knowledge Management, Artificial Intelligence, Design Engineering and Web Technologies. During the 1990s, Nick worked at the University of Nottingham on the application of AI techniques to knowledge management and on various knowledge acquisition projects to develop expert systems for military applications. In 1999, he joined Epistemics where he worked on numerous knowledge projects and helped establish knowledge management...

  10. Persuasive Technology

    DEFF Research Database (Denmark)

    This book constitutes the proceedings of the 5th International Conference on Persuasive Technology, PERSUASIVE 2010, held in Copenhagen Denmark in June 2010. The 25 papers presented were carefully reviewed and selected from 80 submissions. In addition three keynote papers are included in this vol......This book constitutes the proceedings of the 5th International Conference on Persuasive Technology, PERSUASIVE 2010, held in Copenhagen Denmark in June 2010. The 25 papers presented were carefully reviewed and selected from 80 submissions. In addition three keynote papers are included...... in this volume. The topics covered are emotions and user experience, ambient persuasive systems, persuasive design, persuasion profiles, designing for health, psychology of persuasion, embodied and conversational agents, economic incentives, and future directions for persuasive technology....

  11. Seafood Technology

    DEFF Research Database (Denmark)

    Børresen, Torger

    This presentation will fill the total picture of this conference between fisheries and aquaculture, blue biotech and bioconservation, by considering the optimal processing technology of marine resources from the raw material until the seafood reaches the plate of the consumer. The situation today...... must be performed such that total traceability and authenticity of the final products can be presented on demand. The most important aspects to be considered within seafood technology today are safety, healthy products and high eating quality. Safety can be divided into microbiological safety...... and not presenting any safety risk per se. Seafood is healthy due to the omega-3 fatty acids and the nutritional value of vitamins, peptides and proteins. The processing technology must however be performed such that these valuable features are not lost during production. The same applies to the eating quality. Any...

  12. Persuasive Technology

    DEFF Research Database (Denmark)

    This book constitutes the proceedings of the 5th International Conference on Persuasive Technology, PERSUASIVE 2010, held in Copenhagen Denmark in June 2010. The 25 papers presented were carefully reviewed and selected from 80 submissions. In addition three keynote papers are included in this vol......This book constitutes the proceedings of the 5th International Conference on Persuasive Technology, PERSUASIVE 2010, held in Copenhagen Denmark in June 2010. The 25 papers presented were carefully reviewed and selected from 80 submissions. In addition three keynote papers are included...... in this volume. The topics covered are emotions and user experience, ambient persuasive systems, persuasive design, persuasion profiles, designing for health, psychology of persuasion, embodied and conversational agents, economic incentives, and future directions for persuasive technology....

  13. DOE-2 supplement: Version 2.1E

    Energy Technology Data Exchange (ETDEWEB)

    Winkelmann, F.C.; Birdsall, B.E.; Buhl, W.F.; Ellington, K.L.; Erdem, A.E. [Lawrence Berkeley Lab., CA (United States); Hirsch, J.J.; Gates, S. [Hirsch (James J.) and Associates, Camarillo, CA (United States)

    1993-11-01

    This publication updates the DOE-2 Supplement form version 2.1D to version to 2.1E. It contains detailed discussions and instructions for using the features and enhancements introduced into the 2.1B, 2.1C, 2.1D, and 2.1E versions of the program. The building description section contains information on input functions in loads and systems, hourly report frequencies, saving files of hourly output for post processing, sharing hourly report data among program modules, the metric option, and input macros and general library features. The loads section contains information on sunspaces, sunspace modeling, window management and solar radiation, daylighting, trombe walls, fixed shades, fins and overhangs, shade schedules, self shades, heat distribution from lights, the Sherman-Grimsrud infiltrations method. terrain and height modification to wind speed, floor multipliers and interior wall types, improved exterior infrared radiation loss calculation, improved outside air film conductance calculation, window library, window frames, and switchable glazing. The systems section contains information on energy end use and meters, powered induction units, a packaged variable volume -- variable temperature system, a residential variable volume -- variable temperature system, air source heat pump enhancements, water loop heat pump enhancements, variable speed electric heat pump, gas heat pumps, hot water heaters, evaporative cooling, total gas solid-desiccant systems, add on desiccant cooling, water cooled condensers, evaporative precoolers outside air economizer control, optimum fan start, heat recovery from refrigerated case work, night ventilation, baseboard heating, moisture balance calculations, a residential natural ventilation algorithm, improved cooling coil model, system sizing and independent cooling and heating sizing ratios. The plant section contains information on energy meters, gas fired absorption chillers, engine driven compressor chillers, and ice energy storage.

  14. TOUGH2 User's Guide Version 2

    Energy Technology Data Exchange (ETDEWEB)

    Pruess, K.; Oldenburg, C.M.; Moridis, G.J.

    1999-11-01

    TOUGH2 is a numerical simulator for nonisothermal flows of multicomponent, multiphase fluids in one, two, and three-dimensional porous and fractured media. The chief applications for which TOUGH2 is designed are in geothermal reservoir engineering, nuclear waste disposal, environmental assessment and remediation, and unsaturated and saturated zone hydrology. TOUGH2 was first released to the public in 1991; the 1991 code was updated in 1994 when a set of preconditioned conjugate gradient solvers was added to allow a more efficient solution of large problems. The current Version 2.0 features several new fluid property modules and offers enhanced process modeling capabilities, such as coupled reservoir-wellbore flow, precipitation and dissolution effects, and multiphase diffusion. Numerous improvements in previously released modules have been made and new user features have been added, such as enhanced linear equation solvers, and writing of graphics files. The T2VOC module for three-phase flows of water, air and a volatile organic chemical (VOC), and the T2DM module for hydrodynamic dispersion in 2-D flow systems have been integrated into the overall structure of the code and are included in the Version 2.0 package. Data inputs are upwardly compatible with the previous version. Coding changes were generally kept to a minimum, and were only made as needed to achieve the additional functionalities desired. TOUGH2 is written in standard FORTRAN77 and can be run on any platform, such as workstations, PCs, Macintosh, mainframe and supercomputers, for which appropriate FORTRAN compilers are available. This report is a self-contained guide to application of TOUGH2 to subsurface flow problems. It gives a technical description of the TOUGH2 code, including a discussion of the physical processes modeled, and the mathematical and numerical methods used. Illustrative sample problems are presented along with detailed instructions for preparing input data.

  15. UAH Version 6 global satellite temperature products: Methodology and results

    Science.gov (United States)

    Spencer, Roy W.; Christy, John R.; Braswell, William D.

    2017-02-01

    Version 6 of the UAH MSU/AMSU global satellite temperature dataset represents an extensive revision of the procedures employed in previous versions of the UAH datasets. The two most significant results from an end-user perspective are (1) a decrease in the global-average lower tropospheric temperature (LT) trend from +0.14°C decade-1 to +0.11°C decade-1 (Jan. 1979 through Dec. 2015); and (2) the geographic distribution of the LT trends, including higher spatial resolution, owing to a new method for computing LT. We describe the major changes in processing strategy, including a new method for monthly gridpoint averaging which uses all of the footprint data yet eliminates the need for limb correction; a new multi-channel (rather than multi-angle) method for computing the lower tropospheric (LT) temperature product which requires an additional tropopause (TP) channel to be used; and a new empirical method for diurnal drift correction. We show results for LT, the midtroposphere (MT, from MSU2/AMSU5), and lower stratosphere (LS, from MSU4/AMSU9). A 0.03°C decade-1 reduction in the global LT trend from the Version 5.6 product is partly due to lesser sensitivity of the new LT to land surface skin temperature (est. 0.01°C decade-1), with the remainder of the reduction (0.02°C decade-1) due to the new diurnal drift adjustment, the more robust method of LT calculation, and other changes in processing procedures.

  16. Using the Portuguese version of the Bicultural Scale in Brazil.

    Science.gov (United States)

    Zubaran, Carlos; Foresti, Katia; Persch, Karina Nunes

    2016-01-01

    Brazil has received influxes of people, mainly from Africa, Europe and Japan, forming one of the most heterogeneous populations in the world. Some groups, particularly in Southern Brazil, have retained their original cultural traditions, whilst acquiring elements of the typical local Brazilian cultural identity. This is the first study designed to formally evaluate biculturality in Brazil. To psychometrically assess and validate the Portuguese version of the Bicultural Scale (BS) in Brazil. The BS was adapted and translated to Portuguese and tested for the first time in Brazil in a sample of descendants (n = 160) from four immigrant groups and respective locations in Southern Brazil. A series of psychometric tests were conducted in order to examine the validity of the Portuguese version of the BS. Analyses of variance across scores for all subgroups were also conducted. Factor analysis revealed two main factors contributing to most of the variance in scores. The 10 items measuring affiliation with minority cultural characteristics and the typical Brazilian culture yielded Cronbach's alpha coefficients of 0.69 and 0.78 respectively, whereas the overall Cronbach's alpha for all 20 items of the BS was 0.67. There was a significant correlation between items related to the typical Brazilian culture and the generation since immigration of research participants (r = 0.23, p = 0.004). The mean time taken to complete the questionnaire was 7.4 minutes. The results indicate that the Portuguese version of the BS is a valid, reliable and easy-to-use instrument to assess biculturality experienced by descendants of immigrants in southern Brazil.

  17. Version 3.0 of EMINERS - Economic Mineral Resource Simulator

    Science.gov (United States)

    Duval, Joseph S.

    2012-01-01

    Quantitative mineral resource assessment, as developed by the U.S. Geological Survey (USGS), consists of three parts: (1) development of grade and tonnage mineral deposit models; (2) delineation of tracts permissive for each deposit type; and (3) probabilistic estimation of the numbers of undiscovered deposits for each deposit type. The estimate of the number of undiscovered deposits at different levels of probability is the input to the EMINERS (Economic Mineral Resource Simulator) program. EMINERS uses a Monte Carlo statistical process to combine probabilistic estimates of undiscovered mineral deposits with models of mineral deposit grade and tonnage to estimate mineral resources. Version 3.0 of the EMINERS program is available as this USGS Open-File Report 2004-1344. Changes from version 2.0 include updating 87 grade and tonnage models, designing new templates to produce graphs showing cumulative distribution and summary tables, and disabling economic filters. The economic filters were disabled because embedded data for costs of labor and materials, mining techniques, and beneficiation methods are out of date. However, the cost algorithms used in the disabled economic filters are still in the program and available for reference for mining methods and milling techniques. The release notes included with this report give more details on changes in EMINERS over the years. EMINERS is written in C++ and depends upon the Microsoft Visual C++ 6.0 programming environment. The code depends heavily on the use of Microsoft Foundation Classes (MFC) for implementation of the Windows interface. The program works only on Microsoft Windows XP or newer personal computers. It does not work on Macintosh computers. For help in using the program in this report, see the "Quick-Start Guide for Version 3.0 of EMINERS-Economic Mineral Resource Simulator" (W.J. Bawiec and G.T. Spanski, 2012, USGS Open-File Report 2009-1057, linked at right). It demonstrates how to execute EMINERS software

  18. Technology Transfer

    Science.gov (United States)

    Smith, Nanette R.

    1995-01-01

    The objective of this summer's work was to attempt to enhance Technology Application Group (TAG) ability to measure the outcomes of its efforts to transfer NASA technology. By reviewing existing literature, by explaining the economic principles involved in evaluating the economic impact of technology transfer, and by investigating the LaRC processes our William & Mary team has been able to lead this important discussion. In reviewing the existing literature, we identified many of the metrics that are currently being used in the area of technology transfer. Learning about the LaRC technology transfer processes and the metrics currently used to track the transfer process enabled us to compare other R&D facilities to LaRC. We discuss and diagram impacts of technology transfer in the short run and the long run. Significantly, it serves as the basis for analysis and provides guidance in thinking about what the measurement objectives ought to be. By focusing on the SBIR Program, valuable information regarding the strengths and weaknesses of this LaRC program are to be gained. A survey was developed to ask probing questions regarding SBIR contractors' experience with the program. Specifically we are interested in finding out whether the SBIR Program is accomplishing its mission, if the SBIR companies are providing the needed innovations specified by NASA and to what extent those innovations have led to commercial success. We also developed a survey to ask COTR's, who are NASA employees acting as technical advisors to the SBIR contractors, the same type of questions, evaluating the successes and problems with the SBIR Program as they see it. This survey was developed to be implemented interactively on computer. It is our hope that the statistical and econometric studies that can be done on the data collected from all of these sources will provide insight regarding the direction to take in developing systematic evaluations of programs like the SBIR Program so that they can

  19. Clustal W and Clustal X version 2.0.

    Science.gov (United States)

    Larkin, M A; Blackshields, G; Brown, N P; Chenna, R; McGettigan, P A; McWilliam, H; Valentin, F; Wallace, I M; Wilm, A; Lopez, R; Thompson, J D; Gibson, T J; Higgins, D G

    2007-11-01

    The Clustal W and Clustal X multiple sequence alignment programs have been completely rewritten in C++. This will facilitate the further development of the alignment algorithms in the future and has allowed proper porting of the programs to the latest versions of Linux, Macintosh and Windows operating systems. The programs can be run on-line from the EBI web server: http://www.ebi.ac.uk/tools/clustalw2. The source code and executables for Windows, Linux and Macintosh computers are available from the EBI ftp site ftp://ftp.ebi.ac.uk/pub/software/clustalw2/

  20. A collection of wood properties. Version 1.1

    Energy Technology Data Exchange (ETDEWEB)

    Toennisson, R.L.

    1992-09-01

    Reference books are the primary source of wood property data for use in research, school, or business. it has been our experience that obtaining the needed data from several references can be a cumbersome and time-consuming ordeal. These spreadsheets are a compilation of data from several well-known references. Version 1.1 includes the most recent update of commercial woods of the United States and the world. It is intended that they be used for quick summaries, comparisons, and calculations to increase the efficiency of the professional user in report preparation.

  1. Quality manual for the Danish greenhouse gas inventory. Version 2

    Energy Technology Data Exchange (ETDEWEB)

    Nielsen, O.-K.; Plejdrup, M.S.; Winther, M. [and others

    2013-02-15

    This report outlines the quality work undertaken by the emission inventory group at the Department of Environmental Science, Aarhus University in connection with the preparation and reporting of the Danish greenhouse gas inventory. This report updates and expands on the first version of the quality manual published in 2005. The report fulfils the mandatory requirements for a quality assurance/quality control (QA/QC) plan as lined out in the UNFCCC reporting guidelines and the specifications related to reporting under the Kyoto Protocol. The report describes all elements of the internal QC procedures as well as the QA and verification activities carried out in connection with the Danish greenhouse gas inventory. (Author)

  2. Sight restoration comes into focus: versions of visual prostheses.

    Science.gov (United States)

    Mertz, Leslie

    2012-01-01

    The first visual prosthetic is on the commercial stage now, and a variety of new retinal and cortical implants are in the wings. When it won the European stamp of approval last year, the Argus II became the first commercially available visual prosthesis. Now Second Sight Medical Products Inc. of Sylmar, California, the company behind the Argus II, hopes to receive approval to sell the device in the United States by late 2012. As the excitement over the Argus II continues at a fever pitch, other research groups are developing their own versions of visual prostheses, working to create the potential for restoring sight.

  3. VERA version 1.3 user manual and documentation

    Energy Technology Data Exchange (ETDEWEB)

    Quist, Daniel Allen [Los Alamos National Laboratory

    2011-01-06

    VERA is a visualization tool for analyzing compiled executables. It is built on an OpenGL framework with the wxWidgets package. The current version is only for use with the Windows XP and higher operating system. This manual will detail the steps that are needed to run and analyze a sample of malware. VERA is meant to be used in conjunction with the Ether hypervisor framework. Ether is a set of patches made to the Xen hypervisor that allows for covert analysis of running processes. It makes an ideal environment to monitor and trace running programs. More information is available from the Ether website.

  4. Aquarius Salinity Retrieval Algorithm: Final Pre-Launch Version

    Science.gov (United States)

    Wentz, Frank J.; Le Vine, David M.

    2011-01-01

    This document provides the theoretical basis for the Aquarius salinity retrieval algorithm. The inputs to the algorithm are the Aquarius antenna temperature (T(sub A)) measurements along with a number of NCEP operational products and pre-computed tables of space radiation coming from the galaxy and sun. The output is sea-surface salinity and many intermediate variables required for the salinity calculation. This revision of the Algorithm Theoretical Basis Document (ATBD) is intended to be the final pre-launch version.

  5. Multimedia Fluid Mechanics - Multilingual Version CD-ROM

    Science.gov (United States)

    Homsy, G. M.; Aref, H.; Breuer, K. S.; Hochgreb, S.; Koseff, J. R.; Munson, B. R.; Powell, K. G.; Robertson, C. R.; Thoroddsen, S. T.

    2004-07-01

    This CD-ROM offers an interactive tool for teaching undergraduate fluid mechanics. It features experiments that demonstrate fluid mechanical phenomena, animations of important principles and concepts, virtual laboratories in which students acquire data from the images, interactive computational exercises in which parameters can be varied, and other descriptive and illuminating material on applications. The material may be accessed randomly through a hyperlinked text, a search engine, a video library, and a glossary of terms. The new edition has been thoroughly updated and includes versions in English, Spanish and French.

  6. BSAC standardized disc susceptibility testing method (version 11).

    Science.gov (United States)

    Howe, R A; Andrews, J M

    2012-12-01

    This article highlights key amendments incorporated into version 11 of the BSAC standardized disc susceptibility testing method, available as Supplementary data at JAC Online (http://jac.oxfordjournals.org/) and on the BSAC web site (http://bsac.org.uk/susceptibility/guidelines-standardized-disc-susceptibility-testing-method/). The basic disc susceptibility testing method remains unchanged, but there have been a number of alterations to the interpretive criteria for certain organism/drug combinations due to continuing harmonization with the EUCAST MIC breakpoints and constant efforts to improve the reliability and clinical applicability of the guidance.

  7. Tracking code patterns over multiple software versions with Herodotos

    DEFF Research Database (Denmark)

    Palix, Nicolas Jean-Michel; Lawall, Julia; Muller, Gilles

    2010-01-01

    . In this case, it is useful to study the occurrences of such patterns, to identify properties such as when and why they are introduced, how long they persist, and the reasons why they are corrected. To enable studying pattern occurrences over time, we propose a tool, Herodotos, that semi-automatically tracks...... pattern occurrences over multiple versions of a software project, independent of other changes in the source files. Guided by a user-provided configuration file, Herodotos builds various graphs showing the evolution of the pattern occurrences and computes some statistics. We have evaluated this approach...

  8. UQTk Version 3.0.3 User Manual

    Energy Technology Data Exchange (ETDEWEB)

    Sargsyan, Khachik [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Safta, Cosmin [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Chowdhary, Kamaljit Singh [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Castorena, Sarah [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); De Bord, Sarah [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Debusschere, Bert [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-05-01

    The UQ Toolkit (UQTk) is a collection of libraries and tools for the quantification of uncertainty in numerical model predictions. Version 3.0.3 offers intrusive and non-intrusive methods for propagating input uncertainties through computational models, tools for sen- sitivity analysis, methods for sparse surrogate construction, and Bayesian inference tools for inferring parameters from experimental data. This manual discusses the download and installation process for UQTk, provides pointers to the UQ methods used in the toolkit, and describes some of the examples provided with the toolkit.

  9. [MISSCARE Survey - Italian Version: findings from an Italian validation study].

    Science.gov (United States)

    Sist, Luisa; Contini, Carla; Bandini, Anna; Bandini, Stefania; Massa, Licia; Zanin, Roberta; Maricchio, Rita; Gianesini, Gloria; Bassi, Erika; Tartaglini, Daniela; Palese, Alvisa; Ferraresi, Annamaria

    2017-01-01

    The Missed Nursing Care (MNC) refers to nursing interventions that are not completed, partially completed, or postponed. Despite the relevance of MNC, no assessment tools are available in the Italian context, and no data regarding the occurrence of this phenomenon has been documented on a large scale to date. The study aims were: (1) to validate the Italian version of the MISSCARE Survey tool; (2) to measure the prevalence of missed interventions and reasons for missed care as perceived by clinical nurses working in Italian health care settings. After having conducted the forward and backward translation, pre-pilot and pilot phases were developed to ensure face and content validity as well as semantic and conceptual equivalence of the Italian version with the original version. The MISSCARE survey questionnaire was then distributed to 1,233 clinical nurses of whom 1,003 completed the questionnaire. Overall, 979 questionnaires were analysed. The questionnaires were completed from January to March 2012, by nurses working in medical and surgical hospital departments in the Emilia Romagna region of Italy. Construct validity and internal consistency of the instrument were assessed. The face and content validity were ascertained by a group of experts. The instrument acceptability was good given that 79.4% of respondents replied to all items. Construct validity was investigated by an Exploratory Factor Analysis. Four factors explaining 64.18% of variance emerged: communication, lack of facilities/supplies, lack of staff, and unexpected events. Internal consistency, evaluated with Cronbach a, was 0.94. The nursing interventions omitted with greater frequency were, in order: ambulation (74.8%), passive mobilization (69.6%) and oral care (51.3%). The three main reasons for missed interventions were: an unexpected increase in the number of patients (90.5%), increased instability of the clinical condition (86.1%) and insufficient human resources (85.5%). The Italian version of

  10. New features in McStas, version 1.5

    Science.gov (United States)

    Åstrand, P.-O.; Lefmann, K.; Farhi, E.; Nielsen, K.; Skårup, P.

    The neutron ray-tracing simulation package McStas has attracted numerous users, and the development of the package continues with version 1.5 released at the ICNS 2001 conference. New features include: support for neutron polarisation, labelling of neutrons, realistic source and sample components, and interface to the Riso instrument-control software TASCOM. We give a general introduction to McStas and present the latest developments. In particular, we give an example of how the neutron-label option has been used to locate the origin of a spurious side-peak, observed in an experiment with RITA-1 at Riso.

  11. New features in McStas, version 1.5

    CERN Document Server

    Aastrand, P O; Nielsen, K; Skaarup, P; Farhi, E

    2002-01-01

    The neutron ray-tracing simulation package McStas has attracted numerous users, and the development of the package continues with version 1.5 released at the ICNS 2001 conference. New features include: support for neutron polarisation, labelling of neutrons, realistic source and sample components, and interface to the Riso instrument-control software TASCOM. We give a general introduction to McStas and present the latest developments. In particular, we give an example of how the neutron-label option has been used to locate the origin of a spurious side-peak, observed in an experiment with RITA-1 at Riso. (orig.)

  12. Study of symmetry breaking of charged scalar field: Hydrodynamic version

    CERN Document Server

    Matos, T

    2015-01-01

    We rewrite the Klein-Gordon (KG) equation for a complex scalar field as a new Gross-Pitaevskii (GP)-like equation. The potential of the scalar field is a mexican-hat potential and the field is in a thermal bath with one loop contribution. We interpret the new GP equation as a finite temperature generalization of the GP equation for a charged field. We find its hydrodynamic version as well and using it, we derive the corresponding thermodynamics. We also obtain a generalized first law for a charged Bose-Einstein Condensate (BEC).

  13. Versioning for CMIP6 in the Earth System Grid Federation

    Science.gov (United States)

    Weigel, Tobias; Kindermann, Stephan; Lautenschlager, Michael

    2015-04-01

    The Earth System Grid Federation (ESGF) has been used as the e-infrastructure to provide access to CMIP5 data and is expected to serve CMIP6 data as well. 2015 marks the year of continued planning and preparation where new concepts can still be implemented for the operational phase of CMIP6. A particular concern within ESGF operations is the versioning and automated replication of data. From CMIP5 experience we know that the pathway between initial submission of modelling data to the ESGF data space and quality-controlled long-term archival of the final products is long and far from linear. Data may be retracted, amended and updated, and metadata may accumulate at different stages. It is unrealistic to assume that a simple and straightforward process can be used as a role model to build ESGF services around the different stages data will pass through during the active phase of CMIP6. Nonetheless, at the technical level ESGF requires some form of automated control and management. At the same time, the accountability of data products must be made transparent to guard against misinterpretation, increase user experience and promote open and reproducible science. To address the challenges, first some essential versioning policies must be agreed upon and enforced through technical means and organizational processes. The volatile readiness state of CMIP data cannot be changed as it is given by the users; however its management can be improved. A promising approach is to embed persistent identifiers in all CMIP6 data objects and register them so they can be globally resolved by any user and used as reference points within ESGF management processes. A specific conceptual interpretation and management of such identifiers can ensure that they remain valid and useful even if the data objects change or become unavailable. For this, identifiers must be assigned to individual versions and aggregations, connected with each other and integrated in the existing ESGF publication

  14. Study of symmetry breaking of charged scalar field: Hydrodynamic version

    Science.gov (United States)

    Matos, T.; Rodríguez-Meza, M. A.

    2014-11-01

    We rewrite the Klein-Gordon (KG) equation for a complex scalar field as a new Gross-Pitaevskii (GP)-like equation. The potential of the scalar field is a mexican-hat potential and the field is in a thermal bath with one loop contribution. We interpret the new GP equation as a finite temperature generalization of the GP equation for a charged field. We find its hydrodynamic version as well and using it, we derive the corresponding thermodynamics. We also obtain a generalized first law for a charged Bose-Einstein Condensate (BEC).

  15. On a quantum version of the Arnold transformation

    CERN Document Server

    Aldaya, Victor; Guerrero, Julio; Lopez-Ruiz, Francisco F

    2010-01-01

    By a quantum version of the Arnold transformation of classical mechanics, all quantum dynamical systems whose classical equations of motion are non-homogeneous linear second-order ordinary differential equations, including systems with friction linear in velocity, can be related to the quantum free-particle dynamical system. This transformation provides a basic (Heisenberg-Weyl) algebra of quantum operators, along with well-defined Hermitian operators which can be chosen as evolution-like observables and complete the entire Schr\\"odinger algebra. It also proves to be very helpful in performing certain computations quickly, to obtain, for example, wave functions and closed analytic expressions for time-evolution operators.

  16. EFSUMB Statement on Medical Student Education in Ultrasound [long version

    DEFF Research Database (Denmark)

    Cantisani, V; Dietrich, C F; Badea, R

    2016-01-01

    The European Federation of Societies for Ultrasound in Medicine and Biology (EFSUMB) recommends that ultrasound should be used systematically as an easy accessible and instructive educational tool in the curriculum of modern medical schools. Medical students should acquire theoretical knowledge...... of the modality and hands-on training should be implemented and adhere to evidence-based principles. In this paper we report EFSUMB policy statements on medical student education in ultrasound that in a short version is already published in Ultraschall in der Medizin 1....

  17. CEH certified ethical hacker : version 8 : study guide

    CERN Document Server

    Oriyano, Sean-Philip

    2014-01-01

    Prepare for the new Certified Ethical Hacker version 8 exam with this Sybex guide Security professionals remain in high demand. The Certified Ethical Hacker is a one-of-a-kind certification designed to give the candidate a look inside the mind of a hacker. This study guide provides a concise, easy-to-follow approach that covers all of the exam objectives and includes numerous examples and hands-on exercises. Coverage includes cryptography, footprinting and reconnaissance, scanning networks, enumeration of services, gaining access to a system, Trojans, viruses, worms, covert channels, and muc

  18. Soulful Technologies

    DEFF Research Database (Denmark)

    Fausing, Bent

    2010-01-01

    Samsung introduced in 2008 a mobile phone called "Soul" made with a human touch and including itself a "magic touch". Through the analysis of a Nokia mobile phone TV-commercials I want to examine the function and form of digital technology in everyday images. The mobile phone and its digital came...... commercials and internet commercials for mobile phones from Nokia, or handheld computers, as Sony-Ericsson prefers to call them. Digital technology points towards a forgotten pre-human and not only post-human condition....

  19. Playful Technology

    DEFF Research Database (Denmark)

    Johansen, Stine Liv; Eriksson, Eva

    2013-01-01

    In this paper, the design of future services for children in Danish public libraries is discussed, in the light of new challenges and opportunities in relation to new media and technologies. The Danish government has over the last few years initiated and described a range of initiatives regarding...... in the library, the changing role of the librarians and the library space. We argue that intertwining traditional library services with new media forms and engaging play is the core challenge for future design in physical public libraries, but also that it is through new media and technology that new...

  20. Playful Technology

    DEFF Research Database (Denmark)

    Johansen, Stine Liv; Eriksson, Eva

    2013-01-01

    in the library, the changing role of the librarians and the library space. We argue that intertwining traditional library services with new media forms and engaging play is the core challenge for future design in physical public libraries, but also that it is through new media and technology that new......In this paper, the design of future services for children in Danish public libraries is discussed, in the light of new challenges and opportunities in relation to new media and technologies. The Danish government has over the last few years initiated and described a range of initiatives regarding...

  1. Architectural technology

    DEFF Research Database (Denmark)

    2005-01-01

    The booklet offers an overall introduction to the Institute of Architectural Technology and its projects and activities, and an invitation to the reader to contact the institute or the individual researcher for further information. The research, which takes place at the Institute of Architectural...... Technology at the Roayl Danish Academy of Fine Arts, School of Architecture, reflects a spread between strategic, goal-oriented pilot projects, commissioned by a ministry, a fund or a private company, and on the other hand projects which originate from strong personal interests and enthusiasm of individual...

  2. An integrated assessment modeling framework for uncertainty studies in global and regional climate change: the MIT IGSM-CAM (version 1.0)

    OpenAIRE

    Monier, E.; Scott, J R; A. P. Sokolov; C. E. Forest; C. A. Schlosser

    2013-01-01

    This paper describes a computationally efficient framework for uncertainty studies in global and regional climate change. In this framework, the Massachusetts Institute of Technology (MIT) Integrated Global System Model (IGSM), an integrated assessment model that couples an Earth system model of intermediate complexity to a human activity model, is linked to the National Center for Atmospheric Research (NCAR) Community Atmosphere Model (CAM). Since the MIT IGSM-CAM framework (version 1.0) inc...

  3. CERT Resilience Management Model, Version 1.0

    Science.gov (United States)

    2010-05-01

    practice such as ISO 27000, COBIT, or ITIL . If you are a member of an established process improvement community, particularly one centered on CMMI...information technology ITIL Information Technology Infrastructure Library KCI key control indicators KIM Knowledge and Information Management

  4. How Does Using Technology Affect Student Attitudes about Teachers?

    Science.gov (United States)

    Forman, David W.

    1997-01-01

    Describes how a version of the Tuckman Teacher Feedback Form (TTFF) was used to measure teachers'"personality" factors as perceived by students. The instrument included 28 sets of bipolar adjectives to use in describing the teacher. Findings revealed that the application of technology to instruction improved students' perceptions of…

  5. Perceptions Analysis on Service Delivery (SD using ITIL version 3 framework in Ministerio Da Justica Ministry Dili Timor Leste

    Directory of Open Access Journals (Sweden)

    Edio Da Costa

    2012-11-01

    Full Text Available Service Delivery (SD is a managerial of the processes that have a primary focus on the user of all Information System (IS and Information Technology (IT services, which ensures that IS and IT services can be used according as the function to support the activities in the public institutions. The purpose of this study was to determine the extent to which the strategic development of IS and IT services that have been implemented in accordance with the strategic plan towards the implementation of IT Governance. The results of this study indicate that significantly the Ministerio da Justia Dili Timor Leste (MJTL has implemented policies and standard operation procedures (SOP relating to the framework of Information Technology Infrastructur Library (ITIL version 3, although it is not maximized and extended throughout the unit, it is because lack of human resources, staffing and financial aspects.

  6. Predicting nurses' use of healthcare technology using the technology acceptance model: an integrative review.

    Science.gov (United States)

    Strudwick, Gillian

    2015-05-01

    The benefits of healthcare technologies can only be attained if nurses accept and intend to fully use them. One of the most common models utilized to understand user acceptance of technology is the Technology Acceptance Model. This model and modified versions of it have only recently been applied in the healthcare literature among nurse participants. An integrative literature review was conducted on this topic. Ovid/MEDLINE, PubMed, Google Scholar, and CINAHL were searched yielding a total of 982 references. Upon eliminating duplicates and applying the inclusion and exclusion criteria, the review included a total of four dissertations, three symposium proceedings, and 13 peer-reviewed journal articles. These documents were appraised and reviewed. The results show that a modified Technology Acceptance Model with added variables could provide a better explanation of nurses' acceptance of healthcare technology. These added variables to modified versions of the Technology Acceptance Model are discussed, and the studies' methodologies are critiqued. Limitations of the studies included in the integrative review are also examined.

  7. Manufacturing technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    The Manufacturing Technologies Center is an integral part of Sandia National Laboratories, a multiprogram engineering and science laboratory, operated for the Department of Energy (DOE) with major facilities at Albuquerque, New Mexico, and Livermore, California. Our Center is at the core of Sandia`s Advanced Manufacturing effort which spans the entire product realization process.

  8. Blast Technologies

    Science.gov (United States)

    2011-06-27

    Team Leader Risa Scherer Blast Mitigation Interior and Laboratory Team Leader Blast Technologies POC’s Government Point Of Contacts (POCs): To...to yield injury assessments at higher fidelities and with higher confidence UNCLASSIFIED UNCLASSIFIED Risa Scherer Blast Mitigation Interior and

  9. Energy Technology.

    Science.gov (United States)

    Eaton, William W.

    Reviewed are technological problems faced in energy production including locating, recovering, developing, storing, and distributing energy in clean, convenient, economical, and environmentally satisfactory manners. The energy resources of coal, oil, natural gas, hydroelectric power, nuclear energy, solar energy, geothermal energy, winds, tides,…

  10. Strategic Technology

    Science.gov (United States)

    2012-03-11

    the spectrum of future conflict and engagement. Technology Surprise Francis Fukuyama , in his introduction to the book Blindside, summarizes recent...atrocities or large-scale natural disasters abroad 12 Francis Fukuyama , ed, Blindside (Baltimore, MD: Brookings Institute Press, 2007), 1. 13 Defense

  11. (Environmental technology)

    Energy Technology Data Exchange (ETDEWEB)

    Boston, H.L.

    1990-10-12

    The traveler participated in a conference on environmental technology in Paris, sponsored by the US Embassy-Paris, US Environmental Protection Agency (EPA), the French Environmental Ministry, and others. The traveler sat on a panel for environmental aspects of energy technology and made a presentation on the potential contributions of Oak Ridge National Laboratory (ORNL) to a planned French-American Environmental Technologies Institute in Chattanooga, Tennessee, and Evry, France. This institute would provide opportunities for international cooperation on environmental issues and technology transfer related to environmental protection, monitoring, and restoration at US Department of Energy (DOE) facilities. The traveler also attended the Fourth International Conference on Environmental Contamination in Barcelona. Conference topics included environmental chemistry, land disposal of wastes, treatment of toxic wastes, micropollutants, trace organics, artificial radionuclides in the environment, and the use biomonitoring and biosystems for environmental assessment. The traveler presented a paper on The Fate of Radionuclides in Sewage Sludge Applied to Land.'' Those findings corresponded well with results from studies addressing the fate of fallout radionuclides from the Chernobyl nuclear accident. There was an exchange of new information on a number of topics of interest to DOE waste management and environmental restoration needs.

  12. GIG Technologies

    Science.gov (United States)

    2008-08-08

    caching • GIG as a sensor • Cyber SA/defense • Cross Domain Information Sharing • Multi-Level Security solutions • Enterprise Service Bus ( ESB ...Link Layer Technologies Integrated Link Layer All Optical Core For Terrestrial and Space Networks Separate Transmission Networks Mid-Term Integrated

  13. Geospatial Technology

    Science.gov (United States)

    Reed, Philip A.; Ritz, John

    2004-01-01

    Geospatial technology refers to a system that is used to acquire, store, analyze, and output data in two or three dimensions. This data is referenced to the earth by some type of coordinate system, such as a map projection. Geospatial systems include thematic mapping, the Global Positioning System (GPS), remote sensing (RS), telemetry, and…

  14. Sport Technology

    CSIR Research Space (South Africa)

    Kirkbride, T

    2007-11-01

    Full Text Available in design and manufacturing to virtual reality. There are carbon fiber materials used and in performance analysis that use video base technology. In the 1999 cricket World Cup, small earphones were used for Hansie to communicate with the coach and were later...

  15. Accelerator System Model (ASM) user manual with physics and engineering model documentation. ASM version 1.0

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-07-01

    The Accelerator System Model (ASM) is a computer program developed to model proton radiofrequency accelerators and to carry out system level trade studies. The ASM FORTRAN subroutines are incorporated into an intuitive graphical user interface which provides for the {open_quotes}construction{close_quotes} of the accelerator in a window on the computer screen. The interface is based on the Shell for Particle Accelerator Related Codes (SPARC) software technology written for the Macintosh operating system in the C programming language. This User Manual describes the operation and use of the ASM application within the SPARC interface. The Appendix provides a detailed description of the physics and engineering models used in ASM. ASM Version 1.0 is joint project of G. H. Gillespie Associates, Inc. and the Accelerator Technology (AT) Division of the Los Alamos National Laboratory. Neither the ASM Version 1.0 software nor this ASM Documentation may be reproduced without the expressed written consent of both the Los Alamos National Laboratory and G. H. Gillespie Associates, Inc.

  16. The version control service for ATLAS data acquisition configuration files

    CERN Document Server

    Soloviev, Igor; The ATLAS collaboration

    2012-01-01

    To configure data taking session the ATLAS systems and detectors store more than 160 MBytes of data acquisition related configuration information in OKS XML files [1]. The total number of the files exceeds 1300 and they are updated by many system experts. In the past from time to time after such updates we had experienced problems caused by XML syntax errors or inconsistent state of files from a point of view of the overall ATLAS configuration. It was not always possible to know who made a modification causing problems or how to go back to a previous version of the modified file. Few years ago a special service addressing these issues has been implemented and deployed on ATLAS Point-1. It excludes direct write access to XML files stored in a central database repository. Instead, for an update the files are copied into a user repository, validated after modifications and committed using a version control system. The system's callback updates the central repository. Also, it keeps track of all modifications pro...

  17. The Atmospheric Infrared Sounder Version 6 cloud products

    Directory of Open Access Journals (Sweden)

    B. H. Kahn

    2013-06-01

    Full Text Available The Version 6 cloud products of the Atmospheric Infrared Sounder (AIRS and Advanced Microwave Sounding Unit (AMSU instrument suite are described. The cloud top temperature, pressure, and height and effective cloud fraction are now reported at the AIRS field of view (FOV resolution. Significant improvements in cloud height assignment over Version 5 are shown with pixel-scale comparisons to cloud vertical structure observed by the CloudSat 94 GHz radar and the Cloud-Aerosol LIdar with Orthogonal Polarization (CALIOP. Cloud thermodynamic phase (ice, liquid, and unknown phase, ice cloud effective diameter (De, and ice cloud optical thickness (τ are derived using an optimal estimation methodology for AIRS FOVs, and global distributions for January 2007 are presented. The largest values of τ are found in the storm tracks and near convection in the Tropics, while De is largest on the equatorial side of the midlatitude storm tracks in both hemispheres, and lowest in tropical thin cirrus and the winter polar atmosphere. Over the Maritime Continent the diurnal cycle of τ is significantly larger than for the total cloud fraction, ice cloud frequency, and De, and is anchored to the island archipelago morphology. Important differences are described between northern and southern hemispheric midlatitude cyclones using storm center composites. The infrared-based cloud retrievals of AIRS provide unique, decadal-scale and global observations of clouds over the diurnal and annual cycles, and captures variability within the mesoscale and synoptic scales at all latitudes.

  18. Construct Validation of the Portuguese Version of the Restraint Scale

    Directory of Open Access Journals (Sweden)

    João Carvalho

    2016-08-01

    Full Text Available AimThe main purpose of this study was to adapt the Restraint Scale (RS to Portuguese and examine its psychometric properties, specifically its construct validity.MethodIn this study, 238 normal-weight adults (82% women; Mean age = 36.6, SD = 15.0 participated in an online survey containing measures of Restraint Scale, Three Factor Eating Questionnaire, Dutch Eating Behaviour Questionnaire, and Body Dissatisfaction and Drive for Thinness scales.ResultsExploratory factor analyses corroborated the two-factors structure found in previous studies, in particular when three items without clear factorial assignment and low correlation were excluded. A final two-factors version of the RS containing seven items presented a very good fit to the measurement model and good internal consistency. Confirmatory factor analysis of the 7-items RS in relation to a three-factor model of overeating, dieting and body dissatisfaction measures revealed that the RS was the only restraint measure loading in all three factors.ConclusionThis suggests that the 7-items Portuguese version of the RS has good psychometric properties and unique features that lend it appropriate to identify and study unsuccessful chronic dieters.

  19. The version 3 OMI NO2 standard product

    Science.gov (United States)

    Krotkov, Nickolay A.; Lamsal, Lok N.; Celarier, Edward A.; Swartz, William H.; Marchenko, Sergey V.; Bucsela, Eric J.; Chan, Ka Lok; Wenig, Mark; Zara, Marina

    2017-09-01

    We describe the new version 3.0 NASA Ozone Monitoring Instrument (OMI) standard nitrogen dioxide (NO2) products (SPv3). The products and documentation are publicly available from the NASA Goddard Earth Sciences Data and Information Services Center (https://disc.gsfc.nasa.gov/datasets/OMNO2_V003/summary/). The major improvements include (1) a new spectral fitting algorithm for NO2 slant column density (SCD) retrieval and (2) higher-resolution (1° latitude and 1.25° longitude) a priori NO2 and temperature profiles from the Global Modeling Initiative (GMI) chemistry-transport model with yearly varying emissions to calculate air mass factors (AMFs) required to convert SCDs into vertical column densities (VCDs). The new SCDs are systematically lower (by ˜ 10-40 %) than previous, version 2, estimates. Most of this reduction in SCDs is propagated into stratospheric VCDs. Tropospheric NO2 VCDs are also reduced over polluted areas, especially over western Europe, the eastern US, and eastern China. Initial evaluation over unpolluted areas shows that the new SPv3 products agree better with independent satellite- and ground-based Fourier transform infrared (FTIR) measurements. However, further evaluation of tropospheric VCDs is needed over polluted areas, where the increased spatial resolution and more refined AMF estimates may lead to better characterization of pollution hot spots.

  20. The version 3 OMI NO2 standard product

    Directory of Open Access Journals (Sweden)

    N. A. Krotkov

    2017-09-01

    Full Text Available We describe the new version 3.0 NASA Ozone Monitoring Instrument (OMI standard nitrogen dioxide (NO2 products (SPv3. The products and documentation are publicly available from the NASA Goddard Earth Sciences Data and Information Services Center (https://disc.gsfc.nasa.gov/datasets/OMNO2_V003/summary/. The major improvements include (1 a new spectral fitting algorithm for NO2 slant column density (SCD retrieval and (2 higher-resolution (1° latitude and 1.25° longitude a priori NO2 and temperature profiles from the Global Modeling Initiative (GMI chemistry–transport model with yearly varying emissions to calculate air mass factors (AMFs required to convert SCDs into vertical column densities (VCDs. The new SCDs are systematically lower (by ∼ 10–40 % than previous, version 2, estimates. Most of this reduction in SCDs is propagated into stratospheric VCDs. Tropospheric NO2 VCDs are also reduced over polluted areas, especially over western Europe, the eastern US, and eastern China. Initial evaluation over unpolluted areas shows that the new SPv3 products agree better with independent satellite- and ground-based Fourier transform infrared (FTIR measurements. However, further evaluation of tropospheric VCDs is needed over polluted areas, where the increased spatial resolution and more refined AMF estimates may lead to better characterization of pollution hot spots.