WorldWideScience

Sample records for technologies utility tariffs

  1. Utility Green Tariff Programs: Considerations for Federal Agencies

    Energy Technology Data Exchange (ETDEWEB)

    Heeter, Jenny

    2017-05-08

    This FEMP First Thursday presentation will explain the concept of a utility green tariff, how it differs from a green pricing program, and what questions federal agencies should have about participating.

  2. Tariffs and the adoption of clean technology under asymmetric information

    OpenAIRE

    Rodney Ludema; Taizo Takeno

    2007-01-01

    This paper examines the effect of import tariffs on the decision of a foreign monopolist to adopt "clean" technology - technology that reduces the flow of a negative cross-border externality per unit of exports. The clean technology is assumed to increase the marginal cost of production relative to the dirty technology, but only the firm knows the extent of the increase. Under complete information, we show that, despite its protectionist motivation, the importing country's optimal tariff indu...

  3. Feed-in tariffs for promotion of energy storage technologies

    Energy Technology Data Exchange (ETDEWEB)

    Krajacic, Goran, E-mail: Goran.Krajacic@fsb.h [University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Ivana Lucica 5, 10002 Zagreb (Croatia); Duic, Neven, E-mail: Neven.Duic@fsb.h [University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Ivana Lucica 5, 10002 Zagreb (Croatia); Instituto Superior Tecnico, Lisbon (Portugal); Tsikalakis, Antonis, E-mail: atsikal@corfu.power.ece.ntua.g [National Technical University of Athens, Athens (Greece); Zoulias, Manos, E-mail: mzoulias@cres.g [Centre for Renewable Energy Sources and Savings (CRES), Pikermi (Greece); Caralis, George, E-mail: gcaralis@central.ntua.g [National Technical University of Athens, Athens (Greece); Panteri, Eirini, E-mail: panteri@rae.g [Regulatory Authority for Energy (RAE), Athens (Greece); Carvalho, Maria da Graca, E-mail: mariadagraca.carvalho@europarl.europa.e [Instituto Superior Tecnico, Lisbon (Portugal)

    2011-03-15

    Faster market integration of new energy technologies can be achieved by use of proper support mechanisms that will create favourable market conditions for such technologies. The best examples of support mechanisms presented in the last two decades have been the various schemes for the promotion of renewable energy sources (RES). In the EU, the most successful supporting schemes are feed-in tariffs which have significantly increased utilisation of renewable energy sources in Germany, Spain, Portugal, Denmark and many other EU countries. Despite the successful feed-in tariffs for RES promotion, in many cases RES penetration is limited by power system requirements linked to the intermittency of RES sources and technical capabilities of grids. These problems can be solved by implementation of energy storage technologies like reversible or pumped hydro, hydrogen, batteries or any other technology that can be used for balancing or dump load. In this paper, feed-in tariffs for various energy storage technologies are discussed along with a proposal for their application in more appropriate regions. After successful application on islands and outermost regions, energy storage tariffs should be also applied in mainland power systems. Increased use of energy storage could optimise existing assets on the market. - Research highlights: {yields} Feed-in tariffs will promote development and use of energy storage technologies. {yields} Energy storage effectively increases RES penetration. {yields} Pumped Hydro Storage: an efficient solution for RES integration in islands. {yields} Remuneration of Batteries and Inverters as a service can increase RES Penetration. {yields} Desalination, apart from water can help in more efficient RES integration.

  4. The Impact of Utility Tariff Evolution on Behind-the-Meter PV Adoption

    Energy Technology Data Exchange (ETDEWEB)

    Cole, Wesley J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Gagnon, Pieter J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Frew, Bethany A [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Margolis, Robert M [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-09-18

    This analysis uses a new method to link the NREL Regional Energy Deployment System (ReEDS) capacity expansion model with the NREL distributed generation market demand model (dGen) to explore the impact that the evolution of retail electricity tariffs can have on the adoption of distributed photovoltaics (DPV). The evolution most notably takes the form of decreased mid-day electricity costs, as low-cost PV reduces the marginal cost of electricity during those hours and the changes are subsequently communicated to electricity consumers through tariffs. We find that even under the low PV prices of the new SunShot targets the financial performance of DPV under evolved tariffs still motivates behind-the-meter adoption, despite significant reduction in the costs of electricity during afternoon periods driven by deployment of cheap utility-scale PV. The amount of DPV in 2050 in these low-cost futures ranged from 206 GW to 263 GW, a 13-fold and 16-fold increase over 2016 adoption levels respectively. From a utility planner's perspective, the representation of tariff evolution has noteworthy impacts on forecasted DPV adoption in scenarios with widespread time-of-use tariffs. Scenarios that projected adoption under a portfolio of time-of-use tariffs, but did not represent the evolution of those tariffs, predicted up to 36 percent more DPV in 2050, compared to scenarios that did not represent that evolution. Lastly, we find that a reduction in DPV deployment resulting from evolved tariffs had a negligible impact on the total generation from PV - both utility-scale and distributed - in the scenarios we examined. Any reduction in DPV generation was replaced with utility-scale PV generation, to arrive at the quantity that makes up the least-cost portfolio.

  5. Impact of Large Scale Energy Efficiency Programs On Consumer Tariffs and Utility Finances in India

    Energy Technology Data Exchange (ETDEWEB)

    Abhyankar, Nikit; Phadke, Amol

    2011-01-20

    Large-scale EE programs would modestly increase tariffs but reduce consumers' electricity bills significantly. However, the primary benefit of EE programs is a significant reduction in power shortages, which might make these programs politically acceptable even if tariffs increase. To increase political support, utilities could pursue programs that would result in minimal tariff increases. This can be achieved in four ways: (a) focus only on low-cost programs (such as replacing electric water heaters with gas water heaters); (b) sell power conserved through the EE program to the market at a price higher than the cost of peak power purchase; (c) focus on programs where a partial utility subsidy of incremental capital cost might work and (d) increase the number of participant consumers by offering a basket of EE programs to fit all consumer subcategories and tariff tiers. Large scale EE programs can result in consistently negative cash flows and significantly erode the utility's overall profitability. In case the utility is facing shortages, the cash flow is very sensitive to the marginal tariff of the unmet demand. This will have an important bearing on the choice of EE programs in Indian states where low-paying rural and agricultural consumers form the majority of the unmet demand. These findings clearly call for a flexible, sustainable solution to the cash-flow management issue. One option is to include a mechanism like FAC in the utility incentive mechanism. Another sustainable solution might be to have the net program cost and revenue loss built into utility's revenue requirement and thus into consumer tariffs up front. However, the latter approach requires institutionalization of EE as a resource. The utility incentive mechanisms would be able to address the utility disincentive of forgone long-run return but have a minor impact on consumer benefits. Fundamentally, providing incentives for EE programs to make them comparable to supply

  6. The Tariff Analysis Project: A database and analysis platform forelectricity tariffs

    Energy Technology Data Exchange (ETDEWEB)

    Coughlin, K.; White, R.; Bolduc, C.; Fisher, D.; Rosenquist, G.

    2006-05-12

    Much of the work done in energy research involves ananalysis of the costs and benefits of energy-saving technologies andother measures from the perspective of the consumer. The economic valuein particular depends on the price of energy (electricity, gas or otherfuel), which varies significantly both for different types of consumers,and for different regions of the country. Ideally, to provide accurateinformation about the economic value of energy savings, prices should becomputed directly from real tariffs as defined by utility companies. Alarge number of utility tariffs are now available freely over the web,but the complexity and diversity of tariff structures presents aconsiderable barrier to using them in practice. The goal of the TariffAnalysis Project (TAP) is to collect andarchive a statistically completesample of real utility tariffs, and build a set of database and web toolsthat make this information relatively easy to use in cost-benefitanalysis. This report presentsa detailed picture of the current TAPdatabase structure and web interface. While TAP has been designed tohandle tariffs for any kind of utility service, the focus here is onelectric utilities withinthe United States. Electricity tariffs can bevery complicated, so the database structures that have been built toaccommodate them are quite flexible and can be easily generalized toother commodities.

  7. Effect of electricity tariffs and cooling technologies on dairy farm electricity consumption, related costs and greenhouse gas emissions

    NARCIS (Netherlands)

    Upton, J.R.; Shalloo, L.; Murphy, M.; Groot Koerkamp, P.W.G.; Boer, de I.J.M.

    2014-01-01

    The aim of this study was to provide insight into the variations in dairy farm electricity costs across five electricity tariffs. The effect of four milk cooling scenarios is also simulated to illustrate the effect of technologies on the electricity consumption, related costs and CO2 emissions of a

  8. Effect of electricity tariffs and cooling technologies on dairy farm electricity consumption, related costs and greenhouse gas emissions

    NARCIS (Netherlands)

    Upton, J.R.; Shalloo, L.; Murphy, M.; Groot Koerkamp, P.W.G.; Boer, de I.J.M.

    2014-01-01

    The aim of this study was to provide insight into the variations in dairy farm electricity costs across five electricity tariffs. The effect of four milk cooling scenarios is also simulated to illustrate the effect of technologies on the electricity consumption, related costs and CO2 emissions of a

  9. Steepest Ascent Tariff Reforms

    DEFF Research Database (Denmark)

    Raimondos-Møller, Pascalis; Woodland, Alan D.

    2006-01-01

    a theoretical concept where the focus is upon the size of welfare gains accruing from tariff reforms rather than simply with the direction of welfare effects that has been the concern of theliterature.JEL code: F15.Keywords: Steepest ascent tariff reforms; piecemeal tariff policy; welfare; market access; small......This paper introduces the concept of a steepest ascent tariff reform for a small open economy. By construction, it is locally optimal in that it yields the highest gain in utility of any feasible tariff reform vector of the same length. Accordingly, it provides a convenient benchmark...... existing reforms are locally optimal, provide geometric illustrations and compare welfare effectiveness of reforms using numerical examples. Moreover, being a general concept, we apply it to the issue of market access and examine its implications. Overall, the paper's contribution lies in presenting...

  10. Gas utilization technologies

    Energy Technology Data Exchange (ETDEWEB)

    Biljetina, R.

    1994-09-01

    One of the constant challenges facing the research community is the identification of technology needs 5 to 15 years from now. A look back into history indicates that the forces driving natural gas research have changed from decade to decade. In the 1970s research was driven by concerns for adequate supply; in the 1980s research was aimed at creating new markets for natural gas. What then are the driving forces for the 1990s? Recent reports from the natural gas industry have helped define a new direction driven primarily by market demand for natural gas. A study prepared by the Interstate Natural Gas Association of America Foundation entitled ``Survey of Natural Research, Development, and Demonstration RD&D Priorities`` indicated that in the 1990s the highest research priority should be for natural gas utilization and that technology development efforts should not only address efficiency and cost, but environmental and regulatory issues as well. This study and others, such as the report by the American Gas Association (A.G.A.) entitled ``Strategic Vision for Natural Gas Through the Year 2000,`` clearly identify the market sectors driving today`s technology development needs. The biggest driver is the power generation market followed by the industrial, transportation, appliance, and gas cooling markets. This is best illustrated by the GRI 1994 Baseline Projection on market growth in various sectors between the year 1992 and 2010. This paper highlights some of the recent technology developments in each one of these sectors.

  11. The potential for distributed generation in Japanese prototype buildings: A DER-CAM analysis of policy, tariff design, building energy use, and technology development (Japanese translation)

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Nan; Marnay, Chris; Firestone, Ryan; Gao, Weijun; Nishida, Masaru

    2004-10-15

    The August 2003 blackout of the northeastern U.S. and CANADA caused great economic losses and inconvenience to New York City and other affected areas. The blackout was a warning to the rest of the world that the ability of conventional power systems to meet growing electricity demand is questionable. Failure of large power systems can lead to serious emergencies. Introduction of on-site generation, renewable energy such as solar and wind power and the effective utilization of exhaust heat is needed, to meet the growing energy demands of the residential and commercial sectors. Additional benefit can be achieved by integrating these distributed technologies into distributed energy resource (DER) systems. This work demonstrates a method for choosing and designing economically optimal DER systems. An additional purpose of this research is to establish a database of energy tariffs, DER technology cost and performance characteristics, and building energy consumption for Japan. This research builds on prior DER studies at the Ernest Orlando Lawrence Berkeley National Laboratory (LBNL) and with their associates in the Consortium for Electric Reliability Technology Solutions (CERTS) and operation, including the development of the microgrid concept, and the DER selection optimization program, the Distributed Energy Resources Customer Adoption Model (DER-CAM). DER-CAM is a tool designed to find the optimal combination of installed equipment and an idealized operating schedule to minimize a site's energy bills, given performance and cost data on available DER technologies, utility tariffs, and site electrical and thermal loads over a test period, usually an historic year. Since hourly electric and thermal energy data are rarely available, they are typically developed by building simulation for each of six end use loads used to model the building: electric-only loads, space heating, space cooling, refrigeration, water heating, and natural-gas-only loads. DER-CAM provides a

  12. Hawaii technology utilization experiment

    Energy Technology Data Exchange (ETDEWEB)

    Dorn, D.W.; Miller, C.F.

    1976-12-08

    A one-year technology-transfer project involving ERDA installations and Hawaii consisted of sending teams from the Lawrence Livermore Laboratory on week-long field trips every two months to test the effectiveness of different methods of transferring technology information from federal sources to civilian clients. The team was questioned primarily on non-energy matters, and the energy questions asked related mostly to individuals or small industries. The team responed to all questions and found that a wide range of knowledge was more effective than having a sequence of experts. Hawaiians considered current major ERDA projects to be irrelevant to their needs. The team was most successful on a one-to-one basis because large groups and state agencies tend to be more policy- than action-oriented. Personal followup was considered essential. The team also learned that their visits generated ten times as many inquiries as were received unsolicited by the laboratory. Most inquiries involved biomass and use of agricultural wastes, solar energy, and transportation. An important contribution of the team's workshops was linking groups to work together on common problems. An appendix lists the subjects of queries and the names and addresses of consortium participants and Hawaiian contacts. (DCK)

  13. Hawaii technology utilization experiment

    Energy Technology Data Exchange (ETDEWEB)

    Dorn, D.W.; Miller, C.F.

    1976-12-08

    A one-year technology-transfer project involving ERDA installations and Hawaii consisted of sending teams from the Lawrence Livermore Laboratory on week-long field trips every two months to test the effectiveness of different methods of transferring technology information from federal sources to civilian clients. The team was questioned primarily on non-energy matters, and the energy questions asked related mostly to individuals or small industries. The team responed to all questions and found that a wide range of knowledge was more effective than having a sequence of experts. Hawaiians considered current major ERDA projects to be irrelevant to their needs. The team was most successful on a one-to-one basis because large groups and state agencies tend to be more policy- than action-oriented. Personal followup was considered essential. The team also learned that their visits generated ten times as many inquiries as were received unsolicited by the laboratory. Most inquiries involved biomass and use of agricultural wastes, solar energy, and transportation. An important contribution of the team's workshops was linking groups to work together on common problems. An appendix lists the subjects of queries and the names and addresses of consortium participants and Hawaiian contacts. (DCK)

  14. Tariffs Ranking in Mixed Oligopoly with Revenue Constraint

    Directory of Open Access Journals (Sweden)

    Leonard F. S. Wang

    2011-01-01

    Full Text Available Utilizing linear mixed oligopoly model, this paper explores the magnitude of the maximum-revenue tariff, optimum-welfare tariff, and revenue-constrained optimal tariff that is especially designed for the consideration of the bureaucratic inefficiency. In particular, the tariff ranking issue is examined under both cases of Cournot competition and domestic public leadership. We found that, under Cournot competition, the optimum-welfare tariff is the highest and it is followed by the revenue-constrained optimal tariff while the maximum-revenue tariff is the lowest. But, under Stackelberg public leadership, if the domestic private firms are fewer than the foreign firms, the maximum-revenue tariff becomes the highest and the optimum-welfare exceeds the revenue-constrained optimal tariff.

  15. The potential for distributed generation in Japanese prototype buildings: A DER-CAM analysis of policy, tariff design, building energy use, and technology development (English Version)

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Nan; Marnay, Chris; Firestone, Ryan; Gao, Weijun; Nishida, Masaru

    2004-10-15

    The August 2003 blackout of the northeastern U.S. and CANADA caused great economic losses and inconvenience to New York City and other affected areas. The blackout was a warning to the rest of the world that the ability of conventional power systems to meet growing electricity demand is questionable. Failure of large power systems can lead to serious emergencies. Introduction of on-site generation, renewable energy such as solar and wind power and the effective utilization of exhaust heat is needed, to meet the growing energy demands of the residential and commercial sectors. Additional benefit can be achieved by integrating these distributed technologies into distributed energy resource (DER) systems. This work demonstrates a method for choosing and designing economically optimal DER systems. An additional purpose of this research is to establish a database of energy tariffs, DER technology cost and performance characteristics, and building energy consumption for Japan. This research builds on prior DER studies at the Ernest Orlando Lawrence Berkeley National Laboratory (LBNL) and with their associates in the Consortium for Electric Reliability Technology Solutions (CERTS) and operation, including the development of the microgrid concept, and the DER selection optimization program, the Distributed Energy Resources Customer Adoption Model (DER-CAM). DER-CAM is a tool designed to find the optimal combination of installed equipment and an idealized operating schedule to minimize a site's energy bills, given performance and cost data on available DER technologies, utility tariffs, and site electrical and thermal loads over a test period, usually an historic year. Since hourly electric and thermal energy data are rarely available, they are typically developed by building simulation for each of six end use loads used to model the building: electric-only loads, space heating, space cooling, refrigeration, water heating, and natural-gas-only loads. DER-CAM provides a

  16. The potential for distributed generation in Japanese prototype buildings: A DER-CAM analysis of policy, tariff design, building energy use, and technology development (English Version)

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Nan; Marnay, Chris; Firestone, Ryan; Gao, Weijun; Nishida, Masaru

    2004-10-15

    The August 2003 blackout of the northeastern U.S. and CANADA caused great economic losses and inconvenience to New York City and other affected areas. The blackout was a warning to the rest of the world that the ability of conventional power systems to meet growing electricity demand is questionable. Failure of large power systems can lead to serious emergencies. Introduction of on-site generation, renewable energy such as solar and wind power and the effective utilization of exhaust heat is needed, to meet the growing energy demands of the residential and commercial sectors. Additional benefit can be achieved by integrating these distributed technologies into distributed energy resource (DER) systems. This work demonstrates a method for choosing and designing economically optimal DER systems. An additional purpose of this research is to establish a database of energy tariffs, DER technology cost and performance characteristics, and building energy consumption for Japan. This research builds on prior DER studies at the Ernest Orlando Lawrence Berkeley National Laboratory (LBNL) and with their associates in the Consortium for Electric Reliability Technology Solutions (CERTS) and operation, including the development of the microgrid concept, and the DER selection optimization program, the Distributed Energy Resources Customer Adoption Model (DER-CAM). DER-CAM is a tool designed to find the optimal combination of installed equipment and an idealized operating schedule to minimize a site's energy bills, given performance and cost data on available DER technologies, utility tariffs, and site electrical and thermal loads over a test period, usually an historic year. Since hourly electric and thermal energy data are rarely available, they are typically developed by building simulation for each of six end use loads used to model the building: electric-only loads, space heating, space cooling, refrigeration, water heating, and natural-gas-only loads. DER-CAM provides a

  17. Advanced clean coal utilization technologies

    Energy Technology Data Exchange (ETDEWEB)

    Moritomi, Hiroshi [National Inst. for Resources and Environment, Tsukuba, Ibaraki (Japan)

    1993-12-31

    The most important greenhouse gas is CO{sub 2} from coal utilization. Ways of mitigating CO{sub 2} emissions include the use of alternative fuels, using renewable resources and increasing the efficiency of power generation and end use. Adding to such greenhouse gas mitigation technologies, post combustion control by removing CO{sub 2} from power station flue gases and then storing or disposing it will be available. Although the post combustion control have to be evaluated in a systematic manner relating them to whether they are presently available technology, to be available in the near future or long term prospects requiring considerable development, it is considered to be a less promising option owing to the high cost and energy penalty. By contrast, abatement technologies aimed at improving conversion efficiency or reducing energy consumption will reduce emissions while having their own commercial justification.

  18. Agricultural Tariff Tracker

    Data.gov (United States)

    Foreign Agricultural Service, Department of Agriculture — The Agricultural Tariff Tool is a web application that queries tariff schedules and rate information resulting from Free Trade Agreements (FTAs). All...

  19. Optimal tariff design under consumer self-selection

    Energy Technology Data Exchange (ETDEWEB)

    Raesaenen, M.; Ruusunen, J.; Haemaelaeinen, R.

    1995-12-31

    This report considers the design of electricity tariffs which guides an individual consumer to select the tariff designed for his consumption pattern. In the model the utility maximizes the weighted sum of individual consumers` benefits of electricity consumption subject to the utility`s revenue requirement constraints. The consumers` free choice of tariffs is ensured with the so-called self-selection constraints. The relationship between the consumers` optimal choice of tariffs and the weights in the aggregated consumers` benefit function is analyzed. If such weights exist, they will guarantee both the consumers` optimal choice of tariffs and the efficient consumption patterns. Also the welfare effects are analyzed by using demand parameters estimated from a Finnish dynamic pricing experiment. The results indicate that it is possible to design an efficient tariff menu with the welfare losses caused by the self-selection constraints being small compared with the costs created when some consumers choose tariffs other than assigned for them. (author)

  20. Technology utilization and American competitiveness

    Science.gov (United States)

    Penaranda, Frank; Arnold, Ray; Fetterolf, Fred

    1992-01-01

    This session of discussions reports on two sides of the technology transfer issue. The speakers are representatives of the aluminum industry (Alcoa Aluminum) and the National Aeronautics and Space Administration, Office of Commercial Programs. They discuss what technology transfer means, what NASA does for industry, and how information is disseminated.

  1. Utilizing Information Technology to Facilitate Rapid Acquisition

    Science.gov (United States)

    2006-06-01

    PAGES 109 14. SUBJECT TERMS Rapid Acquisition, eCommerce , eProcurement, Information Technology, Contracting, Global Information Network...Agency. 5 eCommerce and eProcurement, and possess an adequate knowledge of information technology. D. RESEARCH QUESTIONS 1. Primary Research... eCommerce , Information Technology, and eProcurement knowledge, and government and private industry reports utilizing numerous library and Internet

  2. Market access through bound tariffs

    DEFF Research Database (Denmark)

    Sala, Davide; Schröder, Philipp J.H.; Yalcin, Erdal

    2010-01-01

    WTO negotiations deal predominantly with bound - besides applied - tariff rates. But, how can reductions in tariffs ceilings, i.e. tariff rates that no exporter may ever actually be confronted with, generate market access? The answer to this question relates to the effects of tariff bindings on t...

  3. Market Access through Bound Tariffs

    DEFF Research Database (Denmark)

    Sala, Davide; Schröder, Philipp J.H.; Yalcin, Erdal

    WTO negotiations deal predominantly with bound - besides applied - tariff rates. But, how can reductions in tariffs ceilings, i.e. tariff rates that no exporter may ever actually be confronted with, generate market access? The answer to this question relates to the effects of tariff bindings on t...

  4. Tariffs Formation on oil transportation

    Science.gov (United States)

    Glyzina, T. S.; Kolbysheva, Yu. V.; Grivtsova, I. S.; Dmitrieva, N. V.

    2016-09-01

    Oil transportation via trunk pipelines is an important part of the oil industry's activity. The main instrument of tariff regulation is the method of tariffs formation. Three methods of tariffs formation such as the method of economically justified costs (the Cost plus method), the method of economically justified return on investment capital (the RAB method), and the method of tariffs indexation were considered.

  5. Development of coal energy utilization technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    Coal liquefaction produces new and clean energy by performing hydrogenation, decomposition and liquefaction on coal under high temperatures and pressures. NEDO has been developing bituminous coal liquefaction technologies by using a 150-t/d pilot plant. It has also developed quality improving and utilization technologies for liquefied coal, whose practical use is expected. For developing coal gasification technologies, construction is in progress for a 200-t/d pilot plant for spouted bed gasification power generation. NEDO intends to develop coal gasification composite cycle power generation with high efficiency and of environment harmonious type. This paper summarizes the results obtained during fiscal 1994. It also dwells on technologies to manufacture hydrogen from coal. It further describes development of technologies to manufacture methane and substituting natural gas (SNG) by hydrogenating and gasifying coal. The ARCH process can select three operation modes depending on which of SNG yield, thermal efficiency or BTX yield is targeted. With respect to promotion of coal utilization technologies, description is given on surveys on development of next generation technologies for coal utilization, and clean coal technology promotion projects. International coal utilization and application projects are also described. 9 figs., 3 tabs.

  6. Recent trend in coal utilization technology. Coal utilization workshop

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Chon Ho; Son, Ja Ek; Lee, In Chul; Jin, Kyung Tae; Kim, Seong Soo [Korea Inst. of Energy Research, Taejon (Korea, Republic of)

    1995-12-01

    The 11th Korea-U.S.A. joint workshop on coal utilization technology was held in somerset, Pennsylvania, U.S.A. from october 2 to 3, 1995. In the opening ceremony, Dr.C. Low-el Miller, associate deputy assistant secretary of office of clean coal technology, U.S.DOE, gave congratulatory remarks and Dr. Young Mok Son, president of KIER, made a keynote address. In this workshop, 30 papers were presented in the fields of emission control technology, advanced power generation systems, and advanced coal cleaning and liquid fuels. Especially, from the Korean side, not only KIER but also other private research institutes and major engineering companies including KEPCO, Daewoo Institute of Construction Technology, Jindo Engineering and Construction Co. Daewoo Institute for Advanced Engineering and universities participated in this workshop, reflecting their great interests. Attendants actively discussed about various coal utilization technologies and exchanged scientific and technical information on the state-of-art clean coal technologies under development. (author)

  7. Development of technologies for solar energy utilization

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    With relation to the development of photovoltaic power systems for practical use, studies were made on thin-substrate polycrystalline solar cells and thin-film solar cells as manufacturing technology for solar cells for practical use. The technological development for super-high efficiency solar cells was also being advanced. Besides, the research and development have been conducted of evaluation technology for photovoltaic power systems and systems to utilize the photovoltaic power generation and peripheral technologies. The demonstrative research on photovoltaic power systems was continued. The international cooperative research on photovoltaic power systems was also made. The development of a manufacturing system for compound semiconductors for solar cells was carried out. As to the development of solar energy system technologies for industrial use, a study of elemental technologies was first made, and next the development of an advanced heat process type solar energy system was commenced. In addition, the research on passive solar systems was made. An investigational study was carried out of technologies for solar cities and solar energy snow melting systems. As international joint projects, studies were made of solar heat timber/cacao drying plants, etc. The paper also commented on projects for international cooperation for the technological development of solar energy utilization systems. 26 figs., 15 tabs.

  8. Development of technologies for utilizing geothermal energy

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    In verifying the effectiveness of the deep geothermal resource exploration technology, development is being carried out on a fracture-type reservoir exploration method. The seismic exploration method investigates detailed structures of underground fracture systems by using seismic waves generated on the ground surface. Verification experiments for fiscal 1994 were carried out by selecting the Kakkonda area in which small fracture networks form reservoir beds. Geothermal resources in deep sections (deeper than 2000 m with temperatures higher than 350{degree}C) are promising in terms of amount of the resources, but anticipated with difficulty in exploration and impediments in drilling. To avoid these risks, studies are being progressed on the availability of resources in deep sections, their utilization possibility, and technologies of effective exploration and drilling. This paper summarizes the results of deep resource investigations during fiscal 1994. It also describes such technological development as hot water utilizing power generation. Development is performed on a binary cycle power generation plant which pumps and utilizes hot water of 150 to 200{degree}C by using a downhole pump. The paper also reports development on element technologies for hot rock power generation systems. It also dwells on development of safe and effective drilling and production technologies for deep geothermal resources.

  9. An Inconvenient Tariff

    Institute of Scientific and Technical Information of China (English)

    NICOLAS; LORIS

    2009-01-01

    When it comes to carbon tariffs, China shouldn’t buy what the United States is selling The current cap-and-trade debate is generating a lot of noise in the United States. Much of that noise is coming from the halls of Congress, where phone lines are ringing off the hook from citizens expressing their

  10. Development of beam utilization/application technology

    Energy Technology Data Exchange (ETDEWEB)

    Choi, B. H.; Kim, Y.K.; Song, T.Y. [and others

    1999-05-01

    High power proton accelerator is considered as one of national fundamental research facilities and a key to advanced nuclear technology development, having been widely used in an un detachable relationship with nuclear research in advanced countries. The high power proton accelerator will be installed in several phases as an up front facility of the nuclear waste transmutation system. It is expected that a common understanding and a general agreement over proper utilization of the accelerator should be deduced and that a user program for beam utilization and application should be firmly established in time for the completion of each phase of the accelerator. This high power proton accelerator will consist of several component accelerators and, from up front, accelerators such as injector, RFQ, CCDTL, etc. will be installed in sequence and deliver respectively at each stage beams of 3MeV, 20MeV, 100Mev, etc. to be variously utilized forindustries, defence industry, medical treatment, environmental protection and basic science research. In order for the accelerator to be fully utilized as a national fundamental research facility beyond nuclear field, it is necessary to formulate a proceeding plan of the user program for the accelerator and to cultivate industrial utilization/application studies of proton beams accelerated by injector or RFQ of the accelerator. (author). 38 refs., 84 tabs., 39 figs.

  11. Market Access through Bound Tariffs

    DEFF Research Database (Denmark)

    Sala, Davide; Schröder, Philipp J.H.; Yalcin, Erdal

    on the risk that exporters face in destination markets. The present paper formalizes the underlying interaction of risk, fixed export costs and firms' market entry decisions based on techniques known from the real options literature; doing so we highlight the important role of bound tariffs at the extensive......WTO negotiations deal predominantly with bound - besides applied - tariff rates. But, how can reductions in tariffs ceilings, i.e. tariff rates that no exporter may ever actually be confronted with, generate market access? The answer to this question relates to the effects of tariff bindings...... margin of trade. We find that bound tariffs are more effective with higher risk destination markets, that a large binding overhang may still command substantial market access, and that reductions in bound tariffs generate effective market access even when bound rates are above current and long...

  12. Market access through bound tariffs

    DEFF Research Database (Denmark)

    Sala, Davide; Schröder, Philipp J.H.; Yalcin, Erdal

    2010-01-01

    on the risk that exporters face in destination markets. The present paper formalizes the underlying interaction of risk, fixed export costs and firms' market entry decisions based on techniques known from the real options literature; doing so we highlight the important role of bound tariffs at the extensive......WTO negotiations deal predominantly with bound - besides applied - tariff rates. But, how can reductions in tariffs ceilings, i.e. tariff rates that no exporter may ever actually be confronted with, generate market access? The answer to this question relates to the effects of tariff bindings...... margin of trade. We find that bound tariffs are more effective with higher risk destination markets, that a large binding overhang may still command substantial market access, and that reductions in bound tariffs generate effective market access even when bound rates are above current and longterm...

  13. Tariff regulation models of the electric sector; Modelos de regulacao tarifaria do setor eletrico

    Energy Technology Data Exchange (ETDEWEB)

    Pires, Jose Claudio Linhares; Piccinini, Mauricio Serrao

    2003-07-01

    This article discusses the tariff regulation models adopted in the electricity utility sector, with a focus on the innovations introduced as a result of the liberalization of the sector that began in the 1980s. The principal tariff criteria are discussed: tariffs determined by the both the rate of return regulation and by marginal cost, and price-caps. Instruments complementary to tariffs are also examined. The main aim of the article is to contribute to a better understanding of the tariff rules adopted in the electricity sector. (author)

  14. Import & Export Tariff Changes in 2007

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ Since January 1st, 2007, the Program for Implementation of Tariffs in 2007 has become effective. The Customs Tariff Commission of the State Council has made many modifications on the implementation of import and export tariffs as following:

  15. Utilizing Technology to Encourage Healthy Lifestyles

    Directory of Open Access Journals (Sweden)

    Cynthia Shuster

    2013-06-01

    Full Text Available In our fast paced world, using technology allows us to connect with people and assist them in developing healthier lifestyles within their time limits due to families, work, and other responsibilities. The goal of our project was the development of online, technology-based, nutrition, health, and fitness education challenges using social media as a means of helping consumers develop healthy lifestyle changes. Participants completed preassessments and postassessments to determine overall program impact and to self-report perceptions of knowledge gained and practice/behavior change. Results from the challenges indicated participants gained knowledge on nutrition, health and fitness topics while making strides towards lifestyle changes and adoption of healthy habits. Results revealed healthier eating habits were developed and physical activity was increased with many participants losing weight. Ease of participating was the most reported reason for participating in the challenges. To determine “best practice,” varying lengths of time for the challenges from four, seven, and thirteen weeks allowed the educators to derive implications for future programming, including branding, length of the challenge, frequency, and participant behavior change. To remain relevant and reach a greater diversity of populations, educators need to continue to explore and utilize various social media tools.

  16. Tariff-based analysis of commercial building electricityprices

    Energy Technology Data Exchange (ETDEWEB)

    Coughlin, Katie M.; Bolduc, Chris A.; Rosenquist, Greg J.; VanBuskirk, Robert D.; McMahon, James E.

    2008-03-28

    This paper presents the results of a survey and analysis ofelectricity tariffs and marginal electricity prices for commercialbuildings. The tariff data come from a survey of 90 utilities and 250tariffs for non-residential customers collected in 2004 as part of theTariff Analysis Project at LBNL. The goals of this analysis are toprovide useful summary data on the marginal electricity prices commercialcustomers actually see, and insight into the factors that are mostimportant in determining prices under different circumstances. We providea new, empirically-based definition of several marginal prices: theeffective marginal price and energy-only anddemand-only prices, andderive a simple formula that expresses the dependence of the effectivemarginal price on the marginal load factor. The latter is a variable thatcan be used to characterize the load impacts of a particular end-use orefficiency measure. We calculate all these prices for eleven regionswithin the continental U.S.

  17. The Haitian Rice Tariff

    Directory of Open Access Journals (Sweden)

    Mats Lundahl

    2016-04-01

    Full Text Available Se ha argumentado que los problemas agríco-las de Haití derivan de la tarifa del arroz de a mediados de los años noventa. Antes, supues-tamente, Haití fue autosuficiente, abastecida por su producción doméstica. Después de la reducción, el mercado haitiano se inundó en importaciones de arroz barato de los EEUU, lo cual despojó a los campesinos de sus fincas, convirtiendolos en migrantes internos, hacia los empleos de bajo pago de las ciudades. El artículo rechaza ese argumento y demuestra que es falso. La malnutrición fue un fenómeno extendido en Haití mucho antes de la reducción de la tarifa del arroz, la cual tampoco tuvo un gran impacto en la importación y la producción doméstica del arroz. Lo que sí impulsó el aumento de las importaciones fue el crecimiento de la población. También el artículo argumenta que un aumento de la tarifa del arroz no solucionará el problema de la alimentación que sufre Haití. English: It has been argued that Haiti’s agricultural problems derive from the reduction of the rice tariff in the mid-1990s. Before that Haiti was allegedly able to meet its food needs by domestic production. After the reduction the Haitian market was swamped by imports of cheap American rice which drove the farmers off their lands and forced them to migrate to low-wage industrial jobs in the cities. The article demonstrates that the argument is false. Malnutrition was widespread in Haiti long before the rice tariff reduction, and the latter did not have much of an impact on rice imports and domestic production. Instead, the main driving force behind imports appears to be population growth. It is also shown that an increase of the rice tariff will not solve Haiti’s food problem.

  18. Utilization of Information Technology to Assist Translation Teaching

    Institute of Scientific and Technical Information of China (English)

    倪宇红

    2016-01-01

    The advance of information technologies has provided educational reform with favorable material conditions and means of support. This paper is an attempt to explore the ways to utilize information technology to facilitate the development of modern translation teaching.

  19. The utilization of information technology in biomedicine

    Science.gov (United States)

    Isaev, E. A.; Tarasov, P. A.

    2017-01-01

    Biomedicine is a branch of medicine that studies the human body, its structure and function in health and disease, pathological condition, methods of diagnosis, treatment and correction [1]. At the moment, to solve their diverse problems associated with the collection, storage, and data analysis, process modeling, biomedicine extensively uses modern technical equipment. The goal of this article - to make a brief analysis of existing technologies (big data, mobile and cloud technologies), in terms of their applicability to the needs of biomedicine.

  20. utilization of sweetpotato based confection technology

    African Journals Online (AJOL)

    oma

    Three (3) states namely; Ebonyi, Enugu and Cross River states were purposively selected so as to cut across the entire agronomic and socio-cultural situations in ..... Agriculture (IITA), Ibadan, Nigeria by (CIP) International sweet potato Centre, Lima, ... Trends in Sweet potato Production Utilization and Marketing among.

  1. BMDO Technology and the Electric Utility Industry

    Science.gov (United States)

    2007-11-02

    diameters, both units were continuously wound solenoids using low-temperature niobium- titanium (Nb-Ti) superconducting materials cooled by superfluid...for Electromechanics (page 71) Technology: Air-core compulsator Dr. Theodore Aanstoos (principal investigator) JJ. Pickle Research Campus Mail Code

  2. Distributed utility technology cost, performance, and environmental characteristics

    Energy Technology Data Exchange (ETDEWEB)

    Wan, Y; Adelman, S

    1995-06-01

    Distributed Utility (DU) is an emerging concept in which modular generation and storage technologies sited near customer loads in distribution systems and specifically targeted demand-side management programs are used to supplement conventional central station generation plants to meet customer energy service needs. Research has shown that implementation of the DU concept could provide substantial benefits to utilities. This report summarizes the cost, performance, and environmental and siting characteristics of existing and emerging modular generation and storage technologies that are applicable under the DU concept. It is intended to be a practical reference guide for utility planners and engineers seeking information on DU technology options. This work was funded by the Office of Utility Technologies of the US Department of Energy.

  3. NASA technology utilization program: The small business market

    Science.gov (United States)

    Vannoy, J. K.; Garcia-Otero, F.; Johnson, F. D.; Staskin, E.

    1980-01-01

    Technology transfer programs were studied to determine how they might be more useful to the small business community. The status, needs, and technology use patterns of small firms are reported. Small business problems and failures are considered. Innovation, capitalization, R and D, and market share problems are discussed. Pocket, captive, and new markets are summarized. Small manufacturers and technology acquisition are discussed, covering external and internal sources, and NASA technology. Small business and the technology utilization program are discussed, covering publications and industrial applications centers. Observations and recommendations include small business market development and contracting, and NASA management technology.

  4. Performance evaluation soil samples utilizing encapsulation technology

    Energy Technology Data Exchange (ETDEWEB)

    Dahlgran, James R.

    1997-12-01

    Performance evaluation soil samples and method of their preparation are described using encapsulation technology to encapsulate analytes which are introduced into a soil matrix for analysis and evaluation by analytical laboratories. Target analytes are mixed in an appropriate solvent at predetermined concentrations. The mixture is emulsified in a solution of polymeric film forming material. The emulsified solution is polymerized to form microcapsules. The microcapsules are recovered, quantitated and introduced into a soil matrix in a predetermined ratio to form soil samples with the desired analyte concentration.

  5. Effects of Home Energy Management Systems on Distribution Utilities and Feeders Under Various Market Structures: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Ruth, Mark; Pratt, Annabelle; Lunacek, Monte; Mittal, Saurabh; Wu, Hongyu; Jones, Wesley

    2015-07-17

    The combination of distributed energy resources (DER) and retail tariff structures to provide benefits to both utility consumers and the utilities is poorly understood. To improve understanding, an Integrated Energy System Model (IESM) is being developed to simulate the physical and economic aspects of DER technologies, the buildings where they reside, and feeders servicing them. The IESM was used to simulate 20 houses with home energy management systems on a single feeder under a time of use tariff to estimate economic and physical impacts on both the households and the distribution utilities. HEMS reduce consumers’ electric bills by precooling houses in the hours before peak electricity pricing. Household savings are greater than the reduction utility net revenue indicating that HEMS can provide a societal benefit providing tariffs are structured so that utilities remain solvent. Utilization of HEMS reduce peak loads during high price hours but shifts it to hours with off-peak and shoulder prices and resulting in a higher peak load.

  6. Researches on the Model of Telecommunication Service with Variable Input Tariff Rates

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The paper sets up and studies the model of the telecommunication queue servicing system with variable input tariff rates, which can relieve the crowding system traffic flows during the busy hour to enhance the utilizing rate of the telecom's resources.

  7. Bibliography: injection technology applicable to geothermal utilization

    Energy Technology Data Exchange (ETDEWEB)

    Darnell, A.J.; Eichelberger, R.L.

    1982-03-19

    This bibliography cites 500 documents that may be helpful in planning, analysis, research, and development of the various aspects of injection technology in geothermal applications. These documents include results from government research; development, demonstration, and commercialization programs; selected references from the literature; symposia; references from various technical societies and installations; reference books; reviews; and other selected material. The cited references are from (1) subject searching, using indexing, storage, and retrieval information data base of the Department of Energy's Technical Information Center's on-line retrieval system, RECON; (2) searches of references from the RECON data base, of work by authors known to be active in the field of geothermal energy research and development; (3) subject and author searches by the computerized data storage and retrieval system of Chemical Abstracts, American Chemical Society, Washington, DC; and (4) selected references from texts and reviews on this subject. Each citation includes title, author, author affiliation, date of publication, and source. The citations are listed in chronological order (most recent first) in each of the subject categories for which this search was made. The RECON accession number is also given.

  8. ECONOMIC AND ENERGETICAL ANALYSIS OF IMPROVED WASTE UTILIZATION PLASMA TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Serghei VAMBOL

    2015-07-01

    Full Text Available Purpose. Energy and economic evaluation of the improved plasma waste utilization technological process, as well as an expediency substantiation of the use of improved plasma technology by comparing its energy consumption with other thermal methods of utilization. Methodology. Analysis of existing modern and advanced methods of waste management and its impact on environmental safety. Considering of energy and monetary costs to implement two different waste management technologies. Results. Studies have shown regular gasification ensure greater heating value due to differences, a significant amount of nitrogen than for plasma gasification. From the point of view of minimizing energy and monetary costs and environmental safety more promising is to offer advanced technology for plasma waste. To carry out the energy assessment of the appropriateness of the considered technologies-comparative calculation was carried out at the standard conditions. This is because in the processing of waste produced useful products, such as liquefied methane, synthetic gas (94% methane and a fuel gas for heating, suitable for sale that provides cost-effectiveness of this technology. Originality. Shown and evaluated ecological and economic efficiency of proposed improved plasma waste utilization technology compared with other thermal techniques. Practical value. Considered and grounded of energy and monetary costs to implement two different waste management technologies, namely ordinary gasification and using plasma generators. Proposed plasma waste utilization technology allows to obtain useful products, such as liquefied methane, synthetic gas and a fuel gas for heating, which are suitable for sale. Plant for improved plasma waste utilization technological process allows to compensate the daily and seasonal electricity and heat consumption fluctuations by allowing the storage of obtained fuel products.

  9. Welfare Effects of Tariff Reduction Formulas

    DEFF Research Database (Denmark)

    Guldager, Jan G.; Schröder, Philipp J.H.

    . This paper presents a two country intra-industry trade model with heterogeneous firms subject to high and low tariffs. We examine the welfare effects of applying three different tariff reduction formulas proposed in the literature i) a proportional cut, ii) the Swiss formula and iii) a compression formula......WTO negotiations rely on tariff reduction formulas. It has been argued that formula approaches are of increasing importance in trade talks, because of the large number of countries involved, the wider dispersion in initial tariffs (e.g. tariff peaks) and gaps between bound and applied tariff rates....... No single formula dominates for all conditions. The ranking of the three tools depends on the degree of product differentiation in the industry, and the achieved reduction in the average tariff....

  10. NASA technology utilization applications. [transfer of medical sciences

    Science.gov (United States)

    1973-01-01

    The work is reported from September 1972 through August 1973 by the Technology Applications Group of the Science Communication Division (SCD), formerly the Biological Sciences Communication Project (BSCP) in the Department of Medical and Public Affairs of the George Washington University. The work was supportive of many aspects of the NASA Technology Utilization program but in particular those dealing with Biomedical and Technology Application Teams, Applications Engineering projects, new technology reporting and documentation and transfer activities. Of particular interest are detailed reports on the progress of various hardware projects, and suggestions and criteria for the evaluation of candidate hardware projects. Finally some observations about the future expansion of the TU program are offered.

  11. The Post-implementation Assessment of Advanced Technology Utilization

    Directory of Open Access Journals (Sweden)

    Hynek Josef

    2012-09-01

    Full Text Available Efficient utilization of advanced manufacturing technology is usually seen as one of the crucial factors in achieving competitiveness on global markets. On the other hand, there are many problems associated with the advanced technology utilization. These problems could be related to the individual phases of the relevant project life cycle - starting from the early stages of AMT projects preparation and evaluation, through various problems related to the project implementation, its integration within the company environment, up to the issues related to the efficient utilization of the already deployed system. This paper focuses on the final stage of this processwhen the post-implementation assessment should be carried out in order to determine whether all initial expectations and objectives were met and whether all the originally promised benefits were delivered. Typical problems of technology benefits evaluation together with various methods, concepts as well as metrics used in the process of the assessment will be discussed here in particular.

  12. Energy Utilization Technology Curriculum Materials FY 91. Illinois Plan for Industrial Technology Education.

    Science.gov (United States)

    Gallo, Dennis; Welty, Kenneth

    This document contains technology-based learning activities for the Illinois energy utilization technology course at the orientation level (grades 9 and 10). This packet includes a course rationale, course mission statement, course description, course outline, suggested learning objectives for each of the energy utilization areas, and suggested…

  13. Energy Utilization Technology Curriculum Materials FY 91. Illinois Plan for Industrial Technology Education.

    Science.gov (United States)

    Gallo, Dennis; Welty, Kenneth

    This document contains technology-based learning activities for the Illinois energy utilization technology course at the orientation level (grades 9 and 10). This packet includes a course rationale, course mission statement, course description, course outline, suggested learning objectives for each of the energy utilization areas, and suggested…

  14. Factors Affecting Teachers Utilization of Technology in Malaysian ESL Classrooms

    Science.gov (United States)

    Mahmood, Foziah; Halim, Huzaina Abdul; Rajindra, Sarasvati; Ghani, Munirah Mohd

    2014-01-01

    Previous studies conducted by researchers show that technology utilization in the ESL classroom indeed aids students in the learning process (Snelbecker 1999). Furthermore, it also ensures that students achieve better results in English Language. Thus, this study was conducted as a stepping stone to help teachers perform better in utilizing…

  15. Consulting report on the NASA technology utilization network system

    Science.gov (United States)

    Hlava, Marjorie M. K.

    1992-01-01

    The purposes of this consulting effort are: (1) to evaluate the existing management and production procedures and workflow as they each relate to the successful development, utilization, and implementation of the NASA Technology Utilization Network System (TUNS) database; (2) to identify, as requested by the NASA Project Monitor, the strengths, weaknesses, areas of bottlenecking, and previously unaddressed problem areas affecting TUNS; (3) to recommend changes or modifications of existing procedures as necessary in order to effect corrections for the overall benefit of NASA TUNS database production, implementation, and utilization; and (4) to recommend the addition of alternative procedures, routines, and activities that will consolidate and facilitate the production, implementation, and utilization of the NASA TUNS database.

  16. China Cut Tariffs on Refined Oil

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    China has cut import tariffs on gasoline, diesel, aviation kerosene, and fuel oil significantly since July 1 this year. According to the information released by the Ministry of Finance, the rate of import tariffs on motor gasoline and aviation gasoline was reduced from 5% to 1%; the rates of import tariffs on aviation kerosene and light diesel were reduced from 9% and 6% to 0 separately; the rate of import tariffs on 5"-7" fuel oil was reduced from 6% to 1%.

  17. 14 CFR 221.94 - Explanation and data supporting tariff changes and new matter in tariffs.

    Science.gov (United States)

    2010-01-01

    ... applicable to the balance of the system, such matter, insofar as it applies over the balance of the system... changes and new matter in tariffs. 221.94 Section 221.94 Aeronautics and Space OFFICE OF THE SECRETARY... With Department § 221.94 Explanation and data supporting tariff changes and new matter in tariffs....

  18. New era / new solutions: The role of alternative tariff structures in water supply projects.

    Science.gov (United States)

    Pinto, F Silva; Marques, R Cunha

    2017-09-13

    Water utilities face different challenges that may force them to seek prioritized objectives. When doing so, particular projects may have to be developed, being important to understand their impact on water tariffs, and thus, on customers. Such consequences may bear an increased relevance in cases stressed with, e.g., resource scarcity, poverty, and the need for infrastructure investments. The resulting cost and revenue variability demand a comprehensive study. If the first may require a stochastic modeling (in major cost components) in order to consider its inherent uncertainty, the second needs to be modeled following context-specific objectives set by the relevant stakeholders. The solutions achieved will likely promote distinct revenue sources, as well as diversified water tariff structures. A multi-objective optimization model (i.e., a Framework for Suitable Prices) is built to deal with those diversified requirements (e.g., stochastic energy costs, affordability, cost recovery, or administrative simplicity). The model is solved through achievement scalarizing functions with several weighting coefficients for a reference point, so as to provide a significant perception of possible revenue options (and their impact) to the decision makers. The proposed method is applied to a case study, Boa Vista Island in Cabo Verde, in which the background characteristics, namely water sources availability (e.g., the adoption of desalination technologies), economic development and other contextual factors were considered. The key role of tariff structure selection is displayed, instead of assuming it a priori, giving important insights regarding project feasibility. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. Utilization of Persuasive Technology in E-Commerce

    OpenAIRE

    Mankila, Pekka

    2012-01-01

    The aim of this Bachelor´s thesis was to examine how persuasive technology is utilized on different e-commerce sites and based on the results to consider how the utilization can be taken even further. Based on those findings and improvement suggestions, a development of more successful e-commerce site is easier. The theory needed in order to complete the qualitative research of this thesis was received from a research of Harri Oinas-Kukkonen and Maija Harjumaa called Persuasive Systems Des...

  20. Dechlorination Technology Manual. Final report. [Utility cooling water discharge systems

    Energy Technology Data Exchange (ETDEWEB)

    Aschoff, A.F.; Chiesa, R.J.; Jacobs, M.H.; Lee, Y.H.; Mehta, S.C.; Meko, A.C.; Musil, R.R.; Sopocy, D.M.; Wilson, J.A.

    1984-11-01

    On November 19, 1982, the United States Environmental Protection Agency (EPA) promulgated regulations severely restricting chlorination practices as they relate to utility cooling water discharge systems. EPRI authorized the preparation of a manual on dechlorination technology to assist utilities in evaluating the various alternatives available to them to meet these new requirements. The Dechlorination Technology Manual emphasizes the engineering aspects involved in the selection and design of dechlorination systems. However, background information is included concerning chemistry, regulatory requirements, environmental considerations and aquatic impacts. There is also a brief discussion of the various alternatives to dechlorination. Case studies are given to acquaint the user with the use of the manual for the design of chlorination facilities given various site-related characteristics, such as salt versus fresh waters. Numerous graphs and tables are presented to facilitate the selection and design process. 207 references, 66 figures, 60 tables.

  1. UTILIZATION OF INDUCTION HEATING TECHNOLOGY IN GALVANIZING LINES

    OpenAIRE

    2015-01-01

    Continuous Hot-Dip Galvanizing lines are widely used for the production of coated steel sheets. Quality improvement measures are of great importance for this type of line. A significant proportion of production and quality losses when operating these types of lines occurs when production is transitioning from one strip gauge/thermal cycle to another. Utilizing induction heating technology, in combination with a sophisticated control system, can dramically decrease yield losses during transiti...

  2. Green energy : enabling technologies : international trends in utility wireless spectrum

    Energy Technology Data Exchange (ETDEWEB)

    Moroney, W. [Utilities Telecom Council, Washington, DC (United States)

    2009-07-01

    The Utilities Telecom Council (UTC) is an international trade association that represents the interests of electric, gas and water utilities in the area of information and communications technology (ICT). This presentation provided background information on the UTC, with particular reference to its history; reporting relationships of the Board of Directors and the various divisions of the association; and radio spectrum. The UTC has been the leading advocate for critical infrastructure industries access to the spectrum since its creation in 1948. The radio spectrum was outlined in detail, including global efforts; Canadian, American, and European frequency allocations; the need for the spectrum; and the bottom-line. It was concluded that governments around the globe are moving to understand that utilities require access to interference-free radio spectrum if the benefits of intelligence in the grid are to be fully realized in a timely and cost-effective manner. 7 figs.

  3. Sensor Acquisition for Water Utilities: A Survey and Technology List

    Energy Technology Data Exchange (ETDEWEB)

    Alai, M; Glascoe, L; Love, A; Johnson, M; Einfeld, W

    2005-03-07

    The early detection of the deliberate biological and chemical contamination of water distribution systems is a necessary capability for securing the nation's water supply. Current and emerging early-detection technology capabilities and shortcomings need to be identified and assessed to provide government agencies and water utilities with an improved methodology for assessing the value of installing these technologies. The Department of Homeland Security (DHS) has tasked a multi-laboratory team to evaluate current and future needs to protect the nation's water distribution infrastructure by supporting an objective evaluation of current and new technologies. The primary deliverables from this Operational Technology Demonstration (OTD) are the following: (1) establishment of an advisory board for review and approval of testing protocols, technology acquisition processes and recommendations for technology test and evaluation in laboratory and field settings; (2) development of a technology acquisition process; (3) creation of laboratory and field testing and evaluation capability; and (4) testing of candidate technologies for insertion into a water early warning system. The initial phase of this study involves the development of two separate but complementary strategies to be reviewed by the advisory board: (1) a technology acquisition strategy, and (2) a technology evaluation strategy. Lawrence Livermore National Laboratory and Sandia National Laboratories are tasked with the first strategy, while Los Alamos, Pacific Northwest, and Oak Ridge National Laboratories are tasked with the second strategy. The first goal of the acquisition strategy is the development of a technology survey process that includes a review of previous sensor surveys and current test programs and then the development of a method to solicit and select existing and emerging sensor technologies for evaluation and testing. In this paper we discuss a survey of previous efforts by

  4. Industry faced with a new tariff system

    Energy Technology Data Exchange (ETDEWEB)

    Poyatos, M.

    1986-10-01

    EDF has been offering a new tariff to its industrial customers since December 1982. Most of them have chosen it, taking best advantage of opportunities given them to minimize their expenses by adjusting their means of operation to the new tariff structure. This paper explains the overall outcome and illustrates, by means of examples, customer behavior.

  5. Welfare Effects of Tariff Reduction Formulas

    DEFF Research Database (Denmark)

    Guldager, Jan G.; Schröder, Philipp J.H.

    . This paper presents a two country intra-industry trade model with heterogeneous firms subject to high and low tariffs. We examine the welfare effects of applying three different tariff reduction formulas proposed in the literature i) a proportional cut, ii) the Swiss formula and iii) a compression formula...

  6. Technology Readiness of Early Career Nurse Trainees: Utilization of the Technology Readiness Index (TRI).

    Science.gov (United States)

    Odlum, Michelle

    2016-01-01

    Health Information Technology (HIT) adoption by clinicians, including nurses, will lead to reduction in healthcare costs and clinical errors and improve health outcomes. Understanding the importance of technology adoption, the current study utilized the Technology Readiness Index to explore technology perceptions of nursing students. Our analysis identifies factors that may influence perceptions of technology, including decreased optimism for students with clinical experience and increased discomfort of US born students. Our study provides insight to inform training programs to further meet the increasing demands of skilled nursing staff.

  7. Tariff-Tax Reforms and Market Access

    DEFF Research Database (Denmark)

    Kreickemeier, Udo; Raimondos-Møller, Pascalis

    2006-01-01

    paper examines whether the country that implements such a reform ends up opening up its markets to international trade, i.e. whether its market access improves. It is shown that this is not necessarily so. We also show that, comparing to the reform of only tariffs, the tariff-tax reform is a less......Reducing tariffs and increasing consumption taxes is a standard IMF advice to countries that want to open up their economy without hurting government finances. Indeed, theoretical analysis of such a tariff-tax reform shows an unambiguous increase in welfare and government revenues. The present...... efficient proposal to follow both as far as it concerns market access and welfare.JEL code: F13, H20.Keywords: Market access; tariff reform, consumption tax reform....

  8. Tariff-Tax Reforms and Market Access

    DEFF Research Database (Denmark)

    Kreickemeier, Udo; Raimondos-Møller, Pascalis

    2006-01-01

    paper examines whether the country that implements such a reform ends up opening up its markets to international trade, i.e. whether its market access improves. It is shown that this is not necessarily so. We also show that, comparing to the reform of only tariffs, the tariff-tax reform is a less......Reducing tariffs and increasing consumption taxes is a standard IMF advice to countries that want to open up their economy without hurting government finances. Indeed, theoretical analysis of such a tariff-tax reform shows an unambiguous increase in welfare and government revenues. The present...... efficient proposal to follow both as far as it concerns market access and welfare.JEL code: F13, H20.Keywords: Market access; tariff reform, consumption tax reform....

  9. Double Dividend from Tariff Differentiation of Reforestation Fund

    Directory of Open Access Journals (Sweden)

    Sudarsono Soedomo

    2013-08-01

    Full Text Available Distortionary levy applied uniformly to all diameter classes of logs from logging natural forest can lead to inefficiencies; certain diameter should be left in the field because it is not economical to be used. Win-win or Pareto improving solution can be achieved if the government is more flexible. Social welfare is higher because of the waste that can be utilized to create employment, production and additional benefits for employers, as well as revenue for the state. Even if the levy rates are forced to zero for small-diameter timber, governments is actually not harmed at all because from the beginning the government does not get any revenue from small timber that is left in the field as waste. In scarcity situations of timber from natural forests, it is desirable if the government is considering differentiating charges in order to reduce or possibly eliminate the volume of waste generated by the levy. In general, tariff differentiation done in the form of higher tariffs for higher diameter logs. If possible, the lowest diameter limit of logs is forced down to its technical limits. That is, the processing tool that will determine how the minimum diameter logs can be processed profitably.Keywords: tariff differentiation, efficiency, timber utilization, government revenue, win-win solutionDOI: 10.7226/jtfm.19.2.163

  10. Utility advanced turbine systems (ATS) technology readiness testing

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-09-15

    The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the US Department of Energy (DOE) is the development of a highly efficient, environmentally superior, and cost-competitive utility ATS for base-load utility-scale power generation, the GE 7H (60 Hz) combined cycle power system, and related 9H (50 Hz) common technology. The major effort will be expended on detail design. Validation of critical components and technologies will be performed, including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially by GE. This change has resulted from DOE's request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include full speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown.

  11. THE UTILIZATION TECHNOLOGIES OF METHANE PRODUCED FROM UNDERGRAUND COAL SEAMS

    Directory of Open Access Journals (Sweden)

    Gökhan AYDIN

    2009-01-01

    Full Text Available A few coal mines use coalbed methane recovered from coal seams. As well as being unable to use gas means waste of an economically valuable source, it contributes to global warming. Gases recovered from coal mines can be used for various applications as an alternative source to natural gas or such as generation of power related to methane concentration. In cases the sale and/or use of gas would not be profitable, the best way for decreasing gas emissions is to destroy methane via flaring. In this study, the utilization technologies of methane are defined in detail and the examples being in practice are given.

  12. Tariffication Strategy in Telecommunication Business

    Directory of Open Access Journals (Sweden)

    Gustav Cepciansky

    2004-01-01

    Full Text Available The tariff policy of a telecommunication operator has a strategic importance on achieving of optimal revenues and a fundamental impact on its position in the competition with another operators on the liberalised telecommunication market. The payment for a connection through a telecommunication network is determined by a rate for one call unit, by the duration of the call unit and their count during a call. An operator derives the rate and the duration of the call unit from a detailed analysis of large databases that contain statistical data on counts and duration of particular calls depending on the call type. Only the operator knows these data files and it keeps them confidential. It will be shown in the paper how it is possible to come to an estimation of revenues from telecommunication traffic only knowing a pair of basic parameters. The first considerations handling with this topic can be found in [1], [2],[3].

  13. Valuation-Based Framework for Considering Distributed Generation Photovoltaic Tariff Design: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Zinaman, O. R.; Darghouth, N. R.

    2015-02-01

    While an export tariff is only one element of a larger regulatory framework for distributed generation, we choose to focus on tariff design because of the significant impact this program design component has on the various flows of value among power sector stakeholders. In that context, this paper is organized into a series of steps that can be taken during the design of a DGPV export tariff design. To that end this paper outlines a holistic, high-level approach to the complex undertaking of DGPV tariff design, the crux of which is an iterative cost-benefit analysis process. We propose a multi-step progression that aims to promote transparent, focused, and informed dialogue on CBA study methodologies and assumptions. When studies are completed, the long-run marginal avoided cost of the DGPV program should be compared against the costs imposed on utilities and non-participating customers, recognizing that these can be defined differently depending on program objectives. The results of this comparison can then be weighed against other program objectives to formulate tariff options. Potential changes to tariff structures can be iteratively fed back into established analytical tools to inform further discussions.

  14. Long Term Incentives for Residential Customers Using Dynamic Tariff

    DEFF Research Database (Denmark)

    Huang, Shaojun; Wu, Qiuwei; Nielsen, Arne Hejde

    2015-01-01

    This paper reviews several grid tariff schemes, including flat tariff, time-of-use, time-varying tariff, demand charge and dynamic tariff (DT), from the perspective of the long term incentives. The long term incentives can motivate the owners of flexible demands to change their energy consumption...

  15. 46 CFR 520.5 - Standard tariff terminology.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 9 2010-10-01 2010-10-01 false Standard tariff terminology. 520.5 Section 520.5... AUTOMATED TARIFFS § 520.5 Standard tariff terminology. (a) Approved codes. The Standard Terminology Appendix.... They are intended to provide a standard terminology baseline for tariffs to facilitate...

  16. Season custom tariff analysis for electric power use in an agro-industry; Analise da tarifa horo-sazonal no uso da energia eletrica em uma agroindustria

    Energy Technology Data Exchange (ETDEWEB)

    Porto, L.G.C.

    1991-05-01

    An investigation about the season custom tariffs in Brazil, and the research to achieve the electric parameters involved in its utilization is shown, analyzing the change of the conventional custom tariff for the blue and green season custom tariffs. This analysis made in a agro-industry where manioc flour is produced, located in Garca, Sao Paulo State, Brazil. A comparison between the blue and green custom tariff was accomplished in order to the better advantage in the system introduction, considering the use schedule and electric parameters involved. (author). 26 refs, 31 figs, 41 tabs, 3 apps

  17. Intelligent products for enhancing the utilization of tracking technology in transportation

    NARCIS (Netherlands)

    Meyer, Gerben G.; Buijs, Paul; Szirbik, Nick B.; Wortmann, J.C.

    2014-01-01

    Purpose – Many transportation companies struggle to effectively utilize the information provided by tracking technology for performing operational control. The research as presented in this paper aims to identify the problems underlying the inability to utilize tracking technology within this

  18. UTILITY ADVANCED TURBINE SYSTEMS (ATS) TECHNOLOGY READINESS TESTING

    Energy Technology Data Exchange (ETDEWEB)

    Unknown

    1999-10-01

    The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the U.S. Department of Energy (DOE) is the development of a highly efficient, environmentally superior, and cost-competitive utility ATS for base-load utility-scale power generation, the GE 7H (60 Hz) combined cycle power system, and related 9H (50 Hz) common technology. The major effort will be expended on detail design. Validation of critical components and technologies will be performed, including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially by GE. This change has resulted from DOE's request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include full speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown in Figure 1-1. Information specifically related to 9H production is presented for continuity in H program reporting, but lies outside the ATS program. This report summarizes work accomplished from 4Q98 through 3Q99. The most significant accomplishments are listed.

  19. DEVELOPMENT OF COAL BED METHANE UTILIZING GIS TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    J. Daniel Arthur

    2003-04-01

    During the second half of the 1990's, Coal Bed Methane (CBM) production increased dramatically nationwide to represent a significant new source of income and natural gas for many independent and established producers. Matching these soaring production rates during this period were the advancements in Geographical Information Systems (GIS) technologies generating terra-bytes of new data for the oil and gas industry. Coupled to these accelerating initiatives are many environmental concerns relating to production wastes and water table depletion of fresh water resources. It is these concerns that prompted a vital need within the industry for the development of Best Management Practices (BMPs) and mitigation strategies utilizing GIS technologies for efficient environmental protection in conjunction with effective production of CBM. This was accomplished by developing a framework to take advantage of a combination of investigative field research joined with leading edge GIS technologies for the creation of environmentally characterized regions of study. Once evaluated these regions had BMP's developed to address their unique situations for Coal Bed Methane production and environmental protection. Results of the project will be used to support the MBOGC's Programmatic Environmental Impact Statement as required by the Montana Environmental Policy Act (MEPA) and by the BLM for NEPA related issues for acreage having federally owned minerals.

  20. Possibilities of utilizing 3DP technology for foundry mould making

    Directory of Open Access Journals (Sweden)

    G. Budzik

    2007-04-01

    Full Text Available Possibilities of application of three-dimensional printing (3DP technology for making casting prototypes are discussed. Three-dimensional printing enables making of foundry moulds for elements of complex shapes. The mould presented in the paper was printed with the use of Z510 Spectrum unit in the Car Technology Sp. z o.o. (Ltd. Co. in Kraków. The basic material for printing foundry moulds is the ZCast 501 powder. This powder is a mixture of traditional molding sand, gypsum and supplementary ingredients. The mould is made in ZCast technology, and it enables casting of zinc, magnesium and aluminum alloys at max. pouring temperature of 1100°C. The paper describes research on the possibility to utilize a standard ZP14 powder for building a rotor blade casting moulds. The research has showed that the ZP14 powder may serve for printing foundry moulds, which should then be subjected to thermo-chemical treatment. Application of the basic ZPrint system powder permits a reduction in mould manufacturing costs.

  1. Cogeneration fueled by solid waste utilizing a new technology

    Energy Technology Data Exchange (ETDEWEB)

    Stanton, M.

    1982-10-01

    Energy recovery from solid waste has been common in Europe for many years. In the last 10 years the number of these facilities built in the United States has been increasing. However most of the solid waste energy recovery facilities have been built in large cities such as Nashville, Tennessee, Saugus, Massachusetts, Akron, Ohio, and Chicago, Illinois, using the well-developed water-wall furnaces similar to those found in large utility plants. The technologies available in sizes applicable to smaller communities have been found wanting in reliability and in the capability for producing high pressure steam to drive turbines. The water-wall rotary combustors being installed in a facility in Sumner County, Tennessee, offer the promise of reliability and capability heretofore not available to smaller communities.

  2. UTILIZATION OF INDUCTION HEATING TECHNOLOGY IN GALVANIZING LINES

    Directory of Open Access Journals (Sweden)

    Victor Demidovich

    2015-09-01

    Full Text Available Continuous Hot-Dip Galvanizing lines are widely used for the production of coated steel sheets. Quality improvement measures are of great importance for this type of line. A significant proportion of production and quality losses when operating these types of lines occurs when production is transitioning from one strip gauge/thermal cycle to another. Utilizing induction heating technology, in combination with a sophisticated control system, can dramically decrease yield losses during transitions. Dynamic Transition and Production Planning Models have recently been developed for the simulation and control of the continuous hot-dip galvanizing line. The results of this work have been implemented in some galvanizing lines with production rate up to 350,000-ton annual capacity.

  3. Low Temperature Heat Source Utilization Current and Advanced Technology

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, James H. Jr.; Dambly, Benjamin W.

    1992-06-01

    Once a geothermal heat source has been identified as having the potential for development, and its thermal, physical, and chemical characteristics have been determined, a method of utilization must be decided upon. This compendium will touch upon some of these concerns, and hopefully will provide the reader with a better understanding of technologies being developed that will be applicable to geothermal development in East Africa, as well as other parts of the world. The appendices contain detailed reports on Down-the-Well Turbo Pump, The Vapor-Turbine Cycle for Geothermal Power Generation, Heat Exchanger Design for Geothermal Power Plants, and a Feasibility Study of Combined Power and Water Desalting Plant Using Hot Geothermal Water. [DJE-2005

  4. Human utilization of triticale: technological and nutritional aspects.

    Science.gov (United States)

    Bona, L; Acs, E; Lantos, Cs; Tomoskozi, S; Lango, B

    2014-01-01

    In spite of the fact that triticale is not subject of the EU intervention, its acreage shows a continuously growing trend. Albeit, both parental species (sp. Triticum, sp. Secale) are used for human food, the utilization of triticale as human food is still uncertain. The main focus of this paper was to study and compare technological and nutritional values of triticale and its parental species. Triticale (cultivars and experimental lines) along with one wheat and one rye varieties were used in the tests. Most of the grain and flour technological properties (Kernel diameter, Test Weight, flour yield, gluten content, Zeleny volume) of the triticale entries positioned in between the parental wheat and rye attributes. However, thousand kernel weight (TKW) of triticale cultivar GK Szemes and grain hardness of cv. GK Idus surpassed all other entries. The study revealed that--having considerable variation--triticale grains are very rich in beneficial elements such us Ca, Mg, P, Cu and Zn. Dietary fiber (DF) content of triticales were between the rye and wheat controls (10-15%). Total arabinoxylan content (TOTAX) of triticales were much closer to rye (6%), and in some genotypes considerably expanded it (6,5-7%). Health conscious consumers trend to use increasingly novel, valuable grain sources and products in their daily based diets. The inappropriate nature of triticale per se flours for baking industry seems to hinder the human utilization. Blends exploiting favorable attributes of triticale may be a suitable way to use this valuable crop in milling products and in larger food industrial scale.

  5. Technology of gas drainage and utilization in Huaibei mining area

    Institute of Scientific and Technical Information of China (English)

    LI Wei; XU Rui

    2009-01-01

    With the characteristics of coal seam geology and gas occurrence, a "ground-underground" integrated gas drainage method was formed, which can relieve gas pressure and increase permeability by mining the protection seams in conditional regions. After coal seam gas drainage, high gas outburst seam was converted to low gas safety seam. In the coal face mining process, safety and high efficient coal mining were realized by the measure of gas-suction over mining. In addition to the drainage gas for civil gas and gas power generation, the Huaibei Mining Group has actively carried out research on the utilization technology of methane drainage by ventilation. On the one hand, it can save precious energy; on the other hand, it can protect the environment for people's survival. In 2007, the amount of coal mine gas drainage was 120 hm3; the rate of coal mine gas drainage was 44%. Compared with the year 2002, the amount of coal mine gas drainage increased by two times. Meanwhile, the utilization rate of gas increased rapidly.

  6. Space Resource Utilization: Technologies and Potential Synergism with Terrestrial Mining

    Science.gov (United States)

    Sanders, Gerald B.

    2015-01-01

    Space Resources and Their Uses: The idea of using resources in space to support human exploration and settlement or for economic development and profit beyond the surface of Earth has been proposed and discussed for decades. Work on developing a method to extract oxygen from lunar regolith started even before humans set foot on the Moon for the first time. The use of space resources, commonly referred to as In Situ Resource Utilization (ISRU), involves the processes and operations to harness and utilize resources in space (both natural and discarded) to create products for subsequent use. Potential space resources include water, solar wind implanted volatiles (hydrogen, helium, carbon, nitrogen, etc.), vast quantities of metals and minerals in extraterrestrial soils, atmospheric constituents, unlimited solar energy, regions of permanent light and darkness, the vacuum and zero-gravity of space itself, trash and waste from human crew activities, and discarded hardware that has completed its primary purpose. ISRU covers a wide variety of concepts, technical disciplines, technologies, and processes. When considering all aspects of ISRU, there are 5 main areas that are relevant to human space exploration and the commercialization of space: 1. Resource Characterization and Mapping, 2. In Situ Consumables Production, 3. Civil Engineering and Construction, 4. In Situ Energy Production and Storage, and 5. In Situ Manufacturing.

  7. Phosphoric and electric utility fuel cell technology development

    Science.gov (United States)

    Breault, R. D.; Briggs, T. A.; Congdon, J. V.; Demarche, T. E.; Gelting, R. L.; Goller, G. J.; Luoma, W. I.; McCloskey, M. W.; Mientek, A. P.; Obrien, J. J.

    1984-01-01

    The advancement of electric utility cell stack technology and reduction of cell stack cost was initiated. The cell stack has a nominal 10 ft (2) active area and operates at 120 psia/405(0)F. The program comprises six parallel phases, which culminate in a full height, 10-ft(2) stack verification test: (1) provides the information and services needed to manage the effort, including definition of the prototype commercial power plant; (2) develops the technical base for long term improvements to the cell stack; (3) develops materials and processing techniques for cell stack components incorporating the best available technology; (4) provides the design of hardware and conceptual processing layouts, and updates the power plant definition of Phase 1 to reflect the results of Phases 2 and 3; Phase 5 manufactures the hardware to verify the achievements of Phases 2 and 3, and analyzes the cost of this hardware; and Phase 6 tests the cell stacks assembled from the hardware of Phase 5 to assess the state of development.

  8. Tariffs and Firm-Level Heterogeneous Fixed Export Costs

    DEFF Research Database (Denmark)

    Schröder, Philipp J.H.; Jørgensen, Jan Guldager

    2006-01-01

    This paper presents a two country intra-industry trade model with bilateral ad valorem tariffs and fixed export costs that are heterogeneous across firms. In this model not all firms will choose to export. We examine the effects of reciprocal changes in the tariff and the fixed export barrier...... on the number of firms, firm profits, tariff revenue and consumer welfare. We show that both types of trade barriers reduce (increase) the number of exporting (pure domestic) firms. However, the sum of available home and foreign varieties may actually increase for small tariffs. Firm profits fall for both...... the tariff and the fixed export barrier. Tariff revenue falls for an increase in fixed exporting costs whereas we have a Laffer curve effect for the tariff. Finally, we establish that welfare falls with fixed export costs and large tariffs but increases for small tariffs, i.e. there exist a welfare...

  9. ECUT (Energy Conversion and Utilization Technologies) program: Biocatalysis project

    Science.gov (United States)

    Baresi, Larry

    1989-03-01

    The Annual Report presents the fiscal year (FY) 1988 research activities and accomplishments, for the Biocatalysis Project of the U.S. Department of Energy, Energy Conversion and Utilization Technologies (ECUT) Division. The ECUT Biocatalysis Project is managed by the Jet Propulsion Laboratory, California Institute of Technology. The Biocatalysis Project is a mission-oriented, applied research and exploratory development activity directed toward resolution of the major generic technical barriers that impede the development of biologically catalyzed commercial chemical production. The approach toward achieving project objectives involves an integrated participation of universities, industrial companies and government research laboratories. The Project's technical activities were organized into three work elements: (1) The Molecular Modeling and Applied Genetics work element includes research on modeling of biological systems, developing rigorous methods for the prediction of three-dimensional (tertiary) protein structure from the amino acid sequence (primary structure) for designing new biocatalysis, defining kinetic models of biocatalyst reactivity, and developing genetically engineered solutions to the generic technical barriers that preclude widespread application of biocatalysis. (2) The Bioprocess Engineering work element supports efforts in novel bioreactor concepts that are likely to lead to substantially higher levels of reactor productivity, product yields and lower separation energetics. Results of work within this work element will be used to establish the technical feasibility of critical bioprocess monitoring and control subsystems. (3) The Bioprocess Design and Assessment work element attempts to develop procedures (via user-friendly computer software) for assessing the energy-economics of biocatalyzed chemical production processes, and initiation of technology transfer for advanced bioprocesses.

  10. Renewable Energy Prices in State-Level Feed-in Tariffs: Federal Law Constraints and Possible Solutions

    Energy Technology Data Exchange (ETDEWEB)

    Hempling, S.; Elefant, C.; Cory, K.; Porter, K.

    2010-01-01

    State legislatures and state utility commissions trying to attract renewable energy projects are considering feed-in tariffs, which obligate retail utilities to purchase electricity from renewable producers under standard arrangements specifying prices, terms, and conditions. The use of feed-in tariffs simplifies the purchase process, provides revenue certainty to generators, and reduces the cost of financing generating projects. However, some argue that federal law--including the Public Utility Regulatory Policies Act of 1978 (PURPA) and the Federal Power Act of 1935 (FPA)--constrain state-level feed-in tariffs. This report seeks to reduce the legal uncertainties for states contemplating feed-in tariffs by explaining the constraints imposed by federal statutes. It describes the federal constraints, identifies transaction categories that are free of those constraints, and offers ways for state and federal policymakers to interpret or modify existing law to remove or reduce these constraints. This report proposes ways to revise these federal statutes. It creates a broad working definition of a state-level feed-in tariff. Given this definition, this report concludes there are paths to non-preempted, state-level feed-in tariffs under current federal law.

  11. Effective Utilization of Commercial Wireless Networking Technology in Planetary Environments

    Science.gov (United States)

    Caulev, Michael (Technical Monitor); Phillip, DeLeon; Horan, Stephen; Borah, Deva; Lyman, Ray

    2005-01-01

    The purpose of this research is to investigate the use of commercial, off-the-shelf wireless networking technology in planetary exploration applications involving rovers and sensor webs. The three objectives of this research project are to: 1) simulate the radio frequency environment of proposed landing sites on Mars using actual topographic data, 2) analyze the performance of current wireless networking standards in the simulated radio frequency environment, and 3) propose modifications to the standards for more efficient utilization. In this annual report, we present our results for the second year of research. During this year, the effort has focussed on the second objective of analyzing the performance of the IEEE 802.11a and IEEE 802.1lb wireless networking standards in the simulated radio frequency environment of Mars. The approach builds upon our previous results which deterministically modelled the RF environment at selected sites on Mars using high-resolution topographical data. These results provide critical information regarding antenna coverage patterns, maximum link distances, effects of surface clutter, and multipath effects. Using these previous results, the physical layer of these wireless networking standards has now been simulated and analyzed in the Martian environment. We are looking to extending these results to the and medium access layer next. Our results give us critical information regarding the performance (data rates, packet error rates, link distances, etc.) of IEEE 802.1 la/b wireless networks. This information enables a critical examination of how these wireless networks may be utilized in future Mars missions and how they may be possibly modified for more optimal usage.

  12. ECUT (Energy Conversion and Utilization Technologies Program). Biocatalysis Project

    Science.gov (United States)

    1986-01-01

    Presented are the FY 1985 accomplishments, activities, and planned research efforts of the Biocatalysis Project of the U.S. Department of Energy, Energy Conversion and Utilization Technologies (ECUT) Program. The Project's technical activities were organized as follows: In the Molecular Modeling and Applied Genetics work element, research focused on (1) modeling and simulation studies to establish the physiological basis of high temperature tolerance in a selected enzyme and the catalytic mechanisms of three species of another enzyme, and (2) determining the degree of plasmid amplification and stability of several DNA bacterial strains. In the Bioprocess Engineering work element, research focused on (1) studies of plasmid propagation and the generation of models, (2) developing methods for preparing immobilized biocatalyst beads, and (3) developing an enzyme encapsulation method. In the Process Design and Analysis work element, research focused on (1) further refinement of a test case simulation of the economics and energy efficiency of alternative biocatalyzed production processes, (2) developing a candidate bioprocess to determine the potential for reduced energy consumption and facility/operating costs, and (3) a techno-economic assessment of potential advancements in microbial ammonia production.

  13. Harmonized Tariff Schedule of the United States (2015) - Revision 1

    Data.gov (United States)

    US International Trade Commission — This dataset is the 2015 Harmonized Tariff Schedule Revision 1 effective July 1, 2015. It provides the applicable tariff rates and statistical categories for all...

  14. From Wellhead to Market. Oil Pipeline Tariffs and Tariff Methodologies in Selected Energy Charter Member Countries

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-01-15

    Freedom of energy transit is an important element of the Energy Charter process. The Energy Charter Treaty obliges its member countries to facilitate energy transit on a nondiscriminatory basis, and to refrain from imposing unreasonable delays, restrictions or charges on energy in transit. A main focus for the Energy Charter process has been the conditions for transit of natural gas. Tariffs, along with access to energy transit infrastructure, are the basis of free transit. To examine gas transit flows and tariff methodologies, the Energy Charter Secretariat published a study on gas transit tariffs in selected Energy Charter member countries in January 2006. This report follows on from the gas tariff study and examines oil transit flows and oil transit tariffs. The Energy Charter constituency in the land-locked part of the Eurasian continent has the world's largest oil pipeline system, which was originally built during the Soviet era. After collapse of the Soviet Union the pipeline system was divided into separate parts by emergence of new borders, and oil transported by the pipeline now has to cross multiple borders before it reaches its destination. The main objectives of this study are; to review transit tariff methodologies for existing and new oil transit pipeline systems across selected member countries of the Energy Charter; to compare transit tariff regimes with those for domestic transport; and to assess the overall consistency of these transit tariffs vis-a-vis the provisions of the Energy Charter Treaty and draft Transit Protocol. Geographically, this study covers the following key oil transit countries; in Eastern Europe, the Caucasus and Central Asia: the Russian Federation, Belarus, Ukraine, Azerbaijan, Kazakhstan, Georgia; and in Western Europe: France, Switzerland, Germany, Austria, Italy, Norway and the UK. Chapter 3 gives a brief review on main domestic and cross-border oil flows in the countries examined. Chapter 4 describes essential

  15. Study on Theory and Methods of Telecommunication Tariff

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The pricing of telecommunication services is quite important aswell as complicated. This paper strengthens the research of theories and implementation of telecommunication tariff in China. It is helpful for the government authorities and enterprises to unify and standardize the regulatory methods, to guide the deciding of the structure and level of telecommunication tariff by implementing scientific theories, to further develop and optimize the tariff system. This paper conducts a systematic, in-depth and creative research on some of the most popular and most difficult problems in the area of telecommunication tariff research, such as the regulation of telecommunication tariff, the theories of telecommunication tariff, the systematic pricing theory, the interconnection charge, the model cost evaluation theory, the long-run incremental cost theory, and the international telecommunication tariff. After studying the foreign methods on telecommunication tariff regulation, basing on the current situation of China's tariff regulation, the scope and methods for China's telecommunication tariff regulation are suggested. Aimed at the weakness of pricing theory for enterprises to set up telecommunication tariffs, an overall frame work of telecommunication tariff theories is proposed. The systematic pricing theory and model cost evaluation theory of telecommunication services are put forward from a brand new perspective. A front topic, the LRIC theory, is probed. In addition, the pricing practices of network interconnection charge and international telecommunication tariff, which are currently very attractive to the theorists, are discussed. Basing on these studies, this paper improves the structure of telecommunication tariff theory. It provides the Chinese government authorities with practical methods and helpful supports to regulate the telecommunication tariffs; in the mean time, it also provides the enterprises with scientific pricing theories and methods to set up

  16. False mystique of broadband technology: utility entry into cable television

    Energy Technology Data Exchange (ETDEWEB)

    Christensen, G.L.; Levy, S.A.

    1983-06-23

    The authors believe that investments by electric utilities in cable-television ownership are ill-advised. They argue here that it is more appropriate for utilities to contract for cable-television channels or to form joint ventures to obtain essential utility uses. Utility executives should recognize, they say, that the more certain purposes of their companies can be accomplished in much-less-risky ways than ownership and that cable television offers an inappropriate field for profit-making ventures by utility companies. 42 references.

  17. Design of grid tariffs in electricity systems with variable renewable energy and power to heat

    DEFF Research Database (Denmark)

    Skytte, Klaus; Bergaentzlé, Claire; Soysal, Emilie Rosenlund

    2017-01-01

    Large shares of variable renewable energy (VRE), requires flexibility solutions are developed. Considerable flexibility potentials exist from large consumers, e.g. power-to-heat (P2H) in district heating (DH). However, the existing grid tariffs obliterate the price signals from the wholesale...... designs that facilitate more flexible energy demand of DH operators. This is illustrated by a case study of Denmark that clearly demonstrates that the introduction of innovative tariffs will improve the business case for flexible P2H technologies and increase the value of VRE. In this way larger...... flexibility potentials can be induced and larger shares of VRE become integrated in the energy systems....

  18. 76 FR 43206 - Electronic Tariff Filing System (ETFS)

    Science.gov (United States)

    2011-07-20

    ... public reviewing the tariff by including some descriptive information on the Title page of the tariff... nondominant carriers to research their previously filed tariff revisions to include different transmittal... by revising paragraphs (b) and (e) to read as follows: Sec. 61.14 Method of filing...

  19. China Cancelled Export Tariff for Nine Kinds of Raw Materials

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    <正>In the recently promulgated "Tariff Execution Plan for 2013", among new tariffs implemented since January 1, 2013, tariffs of nine kinds of raw material products including bauxite, coke,yellow phosphorus, fluorite, magnesium, manganese, silicon metal, silicon carbide and zinc exported by China will be lifted.

  20. Utilization of Information and Communication Technologies in Mathematics Learning

    Science.gov (United States)

    Saadati, Farzaneh; Tarmizi, Rohani Ahmad; Ayub, Ahmad Fauzi Mohd

    2014-01-01

    Attention to integrate technology in teaching and learning has provided a major transformation in the landscape of education. Therefore, many innovations in teaching and learning have been technology-driven. The study attempted to examine what is engineering students' perception regarding the use of Information and Communication Technologies (ICT)…

  1. Energy storage technology - Environmental implications of large scale utilization

    Science.gov (United States)

    Krupka, M. C.; Moore, J. E.; Keller, W. E.; Baca, G. A.; Brasier, R. I.; Bennett, W. S.

    Environmental effects are identified for several energy storage technologies including advanced lead-acid battery, compressed air, underground pumped hydroelectric, flywheel, superconducting magnet, and various thermal systems. A preliminary study on fuel cell technology is also reported. New applications for energy storage technologies and the additional costs of controls to be used for mitigation of specific impacts are briefly discussed.

  2. A Framework for Examining the Utility of Technology-Enhanced Items

    Science.gov (United States)

    Russell, Michael

    2016-01-01

    Interest in and use of technology-enhanced items has increased over the past decade. Given the additional time required to administer many technology-enhanced items and the increased expense required to develop them, it is important for testing programs to consider the utility of technology-enhanced items. The Technology-Enhanced Item Utility…

  3. Reducing Tariffs According to WTO Accession Rules

    DEFF Research Database (Denmark)

    Fosse, Henrik Barslund; Raimondos-Møller, Pascalis

    2012-01-01

    When Vietnam joined the World Trade Organization (WTO) in 2007 it was granted an accession period up to 2014. During this period tariffs would have to fall according to the accession agreement. This paper evaluates this 2007–2014 trade liberalization by building an applied general equilibrium model...

  4. Individual Mobile Communication Services and Tariffs

    NARCIS (Netherlands)

    H. Chen (Hong)

    2008-01-01

    textabstractIndividual services and tariffs existed briefly in the beginning of telecommunications history 150 years ago but faded away over time. Service provisioning evolved into the current supplier-centric situation which has many limitations and disadvantages. This thesis re-embraces the user-c

  5. Wind power feed-in-tariff price of consumptive%风电上网电价机制研究

    Institute of Scientific and Technical Information of China (English)

    周莹; 张娜; 董振; 张婷

    2012-01-01

    随着能源与环境问题的日益突出,风力发电作为技术最成熟、最具开发条件和商业化前景的新发电方式越来越受到重视.目前国内风电发展仍停留在小规模发展或完全由政府投资的阶段,其中既有技术问题也有政策问题,而最核心的问题之一是风电上网电价的问题.风电上网电价的居高不下导致售电电价高于其他能源类型电价,进而导致风电利用率较低.从国内外风电上网电价机制入手,通过分析影响风电上网电价的自然、经济、技术、政策四个方面的风险因素,提出了基于风险的风电上网电价调整机制和激励电网风电消纳的风电上网补贴机制,并结合案例分析了新机制带来的电网公司、政府、风电厂商、用户各主体利益的变化,为合理制定风电上网电价机制提供了理论支持.%With the energy and environmental issues becoming more prominent, wind power generation receives more and more attention as the most mature technology, development conditions and promising new commercial power generation. At present, wind power development is still at the small-scale development or the stage fully funded by government, there is not only technical issues but also policy issues, however, one of the most central issue is the issue of wind power feed-in-tariff price. Because of high wind power feed-in tariff, the sales price is higher than other types of energy, which led to the low utilization of wind power. In this paper, from domestic and international wind power feed-in tariff mechanism to start, by analyzing the impact four risk factors of wind power feed-in-tariff price, including natural, economic, technical and policy aspects, the risk-based wind power feed-in-tariff price adjustment mechanism and incentive wind power consumptive subsidy mechanism are both proposed, combined with case studies of the new mechanism , that brings change of power grid companies, governments, wind

  6. IMPROVING MARKET ACCESS: THE ROLE OF AUCTIONS IN CONVERTING TARIFF-RATE QUOTAS INTO SINGLE TARIFFS

    Directory of Open Access Journals (Sweden)

    Robert Joerin

    2014-03-01

    Full Text Available This paper analyses the conversion of TRQs into single tariffs under perfect and imperfect competition. Based on experiences from Switzerland, auctions allow the determination of the equivalent tariffs. Results from auctions of TRQs of dried meat products under perfect competition show that the observed auction prices would lead to tariffs which are below the equivalent tariffs. Hence, if the ‘new tariffs’ would be determined through auctions, market access would be improved, but also farm prices would lower. However, under imperfect competition, based on Bhagwati’s theorem of the non-equivalence of tariffs and quotas, market access could be improved by converting TRQs into single tariffs even if farm prices are held constant. In order to ensure that auctions are competitive and collusion among bidders is prevented, the ‘variable supply’ auction format which re¬sists collusion needs to be adopted in the event of high buyer’s concentration. Despite the various benefits of auctions, quota holders’ persisting rent-seeking behaviour hinders that auctions are mainstreamed in allocating TRQs.

  7. Tariffs In Apparel And Footwear: A Gender Approach

    Directory of Open Access Journals (Sweden)

    Uros Andrejevic

    2011-07-01

    Full Text Available The theory of tariffs is very different from the reality of tariffs. Most of the literature on protectionism is too theoretical and, more importantly, too aggregate. In practice, tariffs greatly differ among products and affect consumers differently based on their income and gender. In this paper we use a gender approach to study US tariffs on selected apparel and footwear products. The scope of this study is to examine whether gender plays a role in evaluating the cost of tariffs on consumers and to suggest policies to end a possible discriminatory conduct.

  8. Intelligent products for enhancing the utilization of tracking technology in transportation

    NARCIS (Netherlands)

    Meyer, Gerben G.; Buijs, Paul; Szirbik, Nick B.; Wortmann, J.C.

    2014-01-01

    Purpose – Many transportation companies struggle to effectively utilize the information provided by tracking technology for performing operational control. The research as presented in this paper aims to identify the problems underlying the inability to utilize tracking technology within this contex

  9. Utilization of Information and Communication Technologies as a Predictor of Educational Stress on Secondary School Students

    Science.gov (United States)

    Eskicumali, Ahmet; Arslan, Serhat; Demirtas, Zeynep

    2015-01-01

    The purpose of this study is to examine the relationship between utilization of information and communication technologies and educational stress. Participants were 411 secondary school students. Educational Stress Scale and Utilization of Information and Communication Technologies Scale were used as measures. The relationships between students'…

  10. Reactor technology assessment and selection utilizing systems engineering approach

    Science.gov (United States)

    Zolkaffly, Muhammed Zulfakar; Han, Ki-In

    2014-02-01

    The first Nuclear power plant (NPP) deployment in a country is a complex process that needs to consider technical, economic and financial aspects along with other aspects like public acceptance. Increased interest in the deployment of new NPPs, both among newcomer countries and those with expanding programs, necessitates the selection of reactor technology among commercially available technologies. This paper reviews the Systems Decision Process (SDP) of Systems Engineering and applies it in selecting the most appropriate reactor technology for the deployment in Malaysia. The integrated qualitative and quantitative analyses employed in the SDP are explored to perform reactor technology assessment and to select the most feasible technology whose design has also to comply with the IAEA standard requirements and other relevant requirements that have been established in this study. A quick Malaysian case study result suggests that the country reside with PWR (pressurized water reactor) technologies with more detailed study to be performed in the future for the selection of the most appropriate reactor technology for Malaysia. The demonstrated technology assessment also proposes an alternative method to systematically and quantitatively select the most appropriate reactor technology.

  11. Bridging the Technology Readiness "Valley of Death" Utilizing Nanosats

    Science.gov (United States)

    Bauer, Robert A.; Millar, Pamela S.; Norton, Charles D.

    2015-01-01

    Incorporating new technology is a hallmark of space missions. Missions demand ever-improving tools and techniques to allow them to meet the mission science requirements. In Earth Science, these technologies are normally expressed in new instrument capabilities that can enable new measurement concepts, extended capabilities of existing measurement techniques, or totally new detection capabilities, and also, information systems technologies that can enhance data analysis or enable new data analyses to advance modeling and prediction capabilities. Incorporating new technologies has never been easy. There is a large development step beyond demonstration in a laboratory or on an airborne platform to the eventual space environment that is sometimes referred to as the "technology valley of death." Studies have shown that non-validated technology is a primary cause of NASA and DoD mission delays and cost overruns. With the demise of the New Millennium Program within NASA, opportunities for demonstrating technologies in space have been rare. Many technologies are suitable for a flight project after only ground testing. However, some require validation in a relevant or a space flight environment, which cannot be fully tested on the ground or in airborne systems. NASA's Earth Science Technology Program has initiated a nimble program to provide a fairly rapid turn-around of space validated technologies, and thereby reducing future mission risk in incorporating new technologies. The program, called In-Space Validation of Earth Science Technology (InVEST), now has five tasks in development. Each are 3U CubeSats and they are targeted for launch opportunities in the 2016 time period. Prior to formalizing an InVEST program, the technology program office was asked to demonstrate how the program would work and what sort of technologies could benefit from space validation. Three projects were developed and launched, and have demonstrated the technologies that they set out to validate

  12. Utilizing a Simulation within an Online School Technology Leadership Course

    Science.gov (United States)

    Strycker, Jesse

    2016-01-01

    Online courses and programs have grown to become and continue to be a popular option for students. As part of an online Master's of Education in Instructional Technology program, students must complete a school technology leadership course. Leadership decision making, policy making, and how to have innovations take hold in a school settings are…

  13. Utilization of Information and Communication Technologies in Mathematics Learning

    Directory of Open Access Journals (Sweden)

    Farzaneh Saadati

    2014-07-01

    Full Text Available Attention to integrate technology in teaching and learning has provided a major transformation in the landscape of education. Therefore, many innovations in teaching and learning have been technology-driven. The study attempted to examine what is engineering students’ perception regarding the use of Information and Communication Technologies (ICT in mathematics learning as well as investigate their opinion about how ICT can be integrated to improve teaching and learning processes. The subjects were Iranian engineering students from two universities. The finding showed they are fully aware of importance of ICT in teaching and learning mathematics. Whilst, they were feeling comfortable and confident with technology, they do not have more experience of using technology in mathematics classes before. The findings supported the other studies, which indicated the potentials of ICT to facilitate students’ learning, improve teaching, and enhance institutional administration as established in the literature.

  14. Constraints to utilization of draft animal power technology at farm ...

    African Journals Online (AJOL)

    Mo

    Agricultural Engineering and Appropriate Technology Research Institute, AEATRI ... were: inadequate knowledge and skills on the use and management of DAP implements and work animals, lack of ... included participatory methods through working groups, .... Organizations (CBOs), manufactures (formal and informal),.

  15. UTILIZATION OF INFORMATION AND COMMUNICATION TECHNOLOGIES IN MATHEMATICS LEARNING

    Directory of Open Access Journals (Sweden)

    Farzaneh Saadati

    2014-07-01

    Full Text Available Attention to integrate technology in teaching and learning has provided a major transformation in the landscape of education. Therefore, many innovations in teaching and learning have been technology-driven. The study attempted to examine what is engineering students’ perception regarding the use of Information and Communication Technologies (ICT in mathematics learning as well as investigate their opinion about how ICT can be integrated to improve teaching and learning processes. The subjects were Iranian engineering students from two universities. The finding showed they are fully aware of importance of ICT in teaching and learning mathematics. Whilst, they were feeling comfortable and confident with technology, they do not have more experience of using technology in mathematics classes before. The findings supported the other studies, which indicated the potentials of ICT to facilitate students’ learning, improve teaching, and enhance institutional administration as established in the literature.Keywords: Technology, Mathematics Learning, Facebook, Attitude Toward ICT DOI: http://dx.doi.org/10.22342/jme.5.2.1498.138-147

  16. New Policy for Power Tariff Reform

    Institute of Scientific and Technical Information of China (English)

    Guan Yongsheng; Jin Wen

    2007-01-01

    @@ The "Opinions on Deepening Power Institutional Reform in the 11th Five-Year Period" (referred to as "Opinions" below for short) finally unveiled and appeared clearly in the vision of the public on April 6th, 2007. Being the core of the power institutional reform, the "route map" of power tariff reform in the 11th Five-Year Plan period has also been clearly oriented. However, on the whole, the power tariff reform is no drastic as one imagines. With this doubt, the Journalist discussed this issue with Mr. Huang Shaozhong, deputy director of the Department of Price & Financial Supervision under the State Electricity Regulatory Commission, also a member of the Working Group of Power Institutional Reform.

  17. Profiling microbial lignocellulose degradation and utilization by emergent omics technologies

    Energy Technology Data Exchange (ETDEWEB)

    Rosnow, Joshua J. [Biological Sciences Division, Pacific Northwest National Laboratory, Richland, WA, USA; Anderson, Lindsey N. [Biological Sciences Division, Pacific Northwest National Laboratory, Richland, WA, USA; Nair, Reji N. [Biological Sciences Division, Pacific Northwest National Laboratory, Richland, WA, USA; Baker, Erin S. [Biological Sciences Division, Pacific Northwest National Laboratory, Richland, WA, USA; Wright, Aaron T. [Biological Sciences Division, Pacific Northwest National Laboratory, Richland, WA, USA

    2016-07-20

    The use of plant materials to generate renewable biofuels and other high-value chemicals is the sustainable and preferable option, but will require considerable improvements to increase the rate and efficiency of lignocellulose depolymerization. This review highlights novel and emergent technologies that are being developed and deployed to characterize the process of lignocellulose degradation. The review will also illustrate how microbial communities deconstruct and metabolize lignocellulose by identifying the necessary genes and enzyme activities along with the reaction products. These technologies include multi-omic measurements, cell sorting and isolation, nuclear magnetic resonance spectroscopy (NMR), activity-based protein profiling, and direct measurement of enzyme activity. The recalcitrant nature of lignocellulose necessitates the need to characterize the methods microbes employ to deconstruct lignocellulose to inform new strategies on how to greatly improve biofuel conversion processes. New technologies are yielding important insights into microbial functions and strategies employed to degrade lignocellulose, providing a mechanistic blueprint to advance biofuel production.

  18. Diesel Engine Waste Heat Recovery Utilizing Electric Turbocompound Technology

    Energy Technology Data Exchange (ETDEWEB)

    Gerke, Frank G.

    2001-08-05

    This cooperative program between the DOE Office of Heavy Vehicle Technology and Caterpillar, Inc. is aimed at demonstrating electric turbocompound technology on a Class 8 truck engine. This is a lab demonstration program, with no provision for on-truck testing of the system. The goal is to demonstrate the level of fuel efficiency improvement attainable with the electric turbocompound system. Also, electric turbocompounding adds an additional level of control to the air supply which could be a component in an emissions control strategy.

  19. Strategic planning in electric utilities: Using wind technologies as risk management tools

    Energy Technology Data Exchange (ETDEWEB)

    Hoff, T E [Pacific Energy Group, Stanford, CA (United States); Parsons, B [National Renewable Energy Lab., Golden, CO (United States)

    1996-06-01

    This paper highlights research investigating the ownership of renewable energy technologies to mitigate risks faced by the electric utility industry. Renewable energy technology attributes of fuel costs, environmental costs, lead time, modularity, and investment reversibility are discussed. Incorporating some of these attributes into an economic evaluation is illustrated using a municipal utility`s decision to invest in either wind generation or natural gas based generation. The research concludes that wind and other modular renewable energy technologies, such as photovoltaics, have the potential to provide decision makers with physical risk-management investments.

  20. DIGITAL ERA: UTILIZE OF CLOUD COMPUTING TECHNOLOGY IN DIGITAL LIBRARY

    OpenAIRE

    T. RAGHUNADHA REDDY

    2012-01-01

    With the purpose of applying cloud computing to digital library, the paper initially describes cloud computing and analyzes current status of cloud computing in digital library. Then it proposes the architecture of cloud computing in digital library and summarises the application of cloud computing in digital library. Finally the author brings out the future improvement in digital library using cloud computing technology.

  1. Modern technologies of waste utilization from industrial tire production

    Science.gov (United States)

    Azimov, Yusuf; Gilmanshin, Iskander; Gilmanshina, Suriya

    2016-06-01

    The innovative technology of waste tire production recovery from JSC "Nizhnekamskshina", which determines the possibility of obtaining a new type of composite material in the form fiber filled rubber compound (FFRC) as the raw material, production of rubber products with high technical and operational characteristics.

  2. Utilization of Near Field Communication Technology for Loyalty Management

    Directory of Open Access Journals (Sweden)

    Ferina Ferdianti

    2013-09-01

    Full Text Available Near Field Communication (NFC is one of wireless technology developed at this time. We can use a mobile phone to do many transactions with NFC. Mobile developments have created to provide convenience for users in all aspects. However, at this time the function of NFC just limited for payment and micropayment. Beside it, there are assets that support to increase sales with attention of loyality management system. In this system, discounts or prizes are given based on data mining for every transaction costumers. Loyalty management has three concept, those are Frequency, Recency and Quantity. The goals are minimizing the cost, making purchase process faster, and managing data obtained through the NFC technology more simple. The result of this paper is the procedure to use data mining of NFC for loyalty management and system design using Unified Modeling Language approach.

  3. Utilizing HPC Network Technologies in High Energy Physics Experiments

    CERN Document Server

    AUTHOR|(CDS)2088631; The ATLAS collaboration

    2017-01-01

    Because of their performance characteristics high-performance fabrics like Infiniband or OmniPath are interesting technologies for many local area network applications, including data acquisition systems for high-energy physics experiments like the ATLAS experiment at CERN. This paper analyzes existing APIs for high-performance fabrics and evaluates their suitability for data acquisition systems in terms of performance and domain applicability. The study finds that existing software APIs for high-performance interconnects are focused on applications in high-performance computing with specific workloads and are not compatible with the requirements of data acquisition systems. To evaluate the use of high-performance interconnects in data acquisition systems a custom library, NetIO, is presented and compared against existing technologies. NetIO has a message queue-like interface which matches the ATLAS use case better than traditional HPC APIs like MPI. The architecture of NetIO is based on a interchangeable bac...

  4. DIGITAL ERA: UTILIZE OF CLOUD COMPUTING TECHNOLOGY IN DIGITAL LIBRARY

    Directory of Open Access Journals (Sweden)

    T. RAGHUNADHA REDDY

    2012-09-01

    Full Text Available With the purpose of applying cloud computing to digital library, the paper initially describes cloud computing and analyzes current status of cloud computing in digital library. Then it proposes the architecture of cloud computing in digital library and summarises the application of cloud computing in digital library. Finally the author brings out the future improvement in digital library using cloud computing technology.

  5. Preliminary technology utilization assessment of the robotic fruit harvester

    Science.gov (United States)

    Wilhelm, J.

    1982-01-01

    The results of an analysis whose purpose was to examine the history and progress of mechanical fruit harvesting, to determine the significance of a robotic fruit tree harvester and to assess the available market for such a product are summarized. Background information that can be used in determining the benefit of a proof of principle demonstration is provided. Such a demonstration could be a major step toward the transfer of this NASA technology.

  6. UTILITY ADVANCED TURBINE SYSTEMS(ATS) TECHNOLOGY READINESS TESTING

    Energy Technology Data Exchange (ETDEWEB)

    Kenneth A. Yackly

    2001-06-01

    The following paper provides an overview of GE's H System{trademark} technology, and specifically, the design, development, and test activities associated with the DOE Advanced Turbine Systems (ATS) program. There was intensive effort expended in bringing this revolutionary advanced technology program to commercial reality. In addition to describing the magnitude of performance improvement possible through use of H System{trademark} technology, this paper discusses the technological milestones during the development of the first 9H (50Hz) and 7H (60 Hz) gas turbines. To illustrate the methodical product development strategy used by GE, this paper discusses several technologies that were essential to the introduction of the H System{trademark}. Also included are analyses of the series of comprehensive tests of materials, components and subsystems that necessarily preceded full scale field testing of the H System{trademark}. This paper validates one of the basic premises with which GE started the H System{trademark} development program: exhaustive and elaborate testing programs minimized risk at every step of this process, and increase the probability of success when the H System{trademark} is introduced into commercial service. In 1995, GE, the world leader in gas turbine technology for over half a century, in conjunction with the DOE National Energy Technology Laboratory's ATS program, introduced its new generation of gas turbines. This H System{trademark} technology is the first gas turbine ever to achieve the milestone of 60% fuel efficiency. Because fuel represents the largest individual expense of running a power plant, an efficiency increase of even a single percentage point can substantially reduce operating costs over the life of a typical gas-fired, combined-cycle plant in the 400 to 500 megawatt range. The H System{trademark} is not simply a state-of-the-art gas turbine. It is an advanced, integrated, combined-cycle system in which every

  7. Tariffs and Firm-Level Heterogeneous Fixed Export Costs

    DEFF Research Database (Denmark)

    Schröder, Philipp J.H.; Jørgensen, Jan Guldager

    2006-01-01

    on the number of firms, firm profits, tariff revenue and consumer welfare. We show that both types of trade barriers reduce (increase) the number of exporting (pure domestic) firms. However, the sum of available home and foreign varieties may actually increase for small tariffs. Firm profits fall for both......This paper presents a two country intra-industry trade model with bilateral ad valorem tariffs and fixed export costs that are heterogeneous across firms. In this model not all firms will choose to export. We examine the effects of reciprocal changes in the tariff and the fixed export barrier...

  8. Technology for the Utilization of Deep Geothermal Reservoirs in Germany

    Directory of Open Access Journals (Sweden)

    David Bruhn

    2007-01-01

    Full Text Available The Geothermal Technology Program at GFZ identify suitable geological structures and horizons for extracting energy and develop new methods to increase the productivity of deep geothermal reservoirs. In this context, the former gas exploration well Groß Schönebeck EGrSk3/90 (50 km northeast of Berlin was reopened and deepened to the 4309 m depth to serve as a geothermal in situ laboratory for testing stimulation concepts. The objective of these stimulation operations was to create secondary flow paths and to improve the inflow performance of the well.In addition, Groß Schönebeck is the only test site of the EU-project I-GET (Integrated Geophysical Exploration Technologies for deep fractured geothermal systems, where new, cost-effective and reliable geothermal exploration techniques are developed to increase the success rate of drilling.Based on the data of deep neighbouring wells and the industry seismic measurements, a model was generated to visualise the geological setting and to plan the course of the second well. The well encounters a typical sequence of various geological formations, known in the North German Basin. A series of 2370 m of Quaternary to Triassic sediments is underlain by 1492 m of Zechstein salts, and the following section of this well, which was foreseen for testing, comprises 400 m of Rotliegend formation (siltstones, sandstones, conglomerates and 60 m of underlying volcanic rocks down to the final depth of 4309 m.The well Groß Schönebeck makes the deep sedimentary Rotliegend reservoir accessible, which is characterized by water bearing porous and fractured rocks. The Rotliegend reservoir consists of a sequence of sandstones, conglomerates, and volcanic rocks with formation fluids of 150 °C at porosities of up to 10 %. Experiments in this in-situ geothermal laboratory should lead to a reliable technology for a sufficient production of deep fluids in such reservoirs.

  9. Clinical utility of RapidArcTM radiotherapy technology

    Directory of Open Access Journals (Sweden)

    Infusino E

    2015-11-01

    Full Text Available Erminia Infusino Department of Radiotherapy, Campus Bio-Medico University Hospital, Rome, Italy Abstract: RapidArcTM is a radiation technique that delivers highly conformal dose distributions through the complete rotation (360° and speed variation of the linear accelerator gantry. This technique, called volumetric modulated arc therapy (VMAT, compared with conventional radiotherapy techniques, can achieve high-target volume coverage and sparing damage to normal tissues. RapidArc delivers precise dose distribution and conformity similar to or greater than intensity-modulated radiation therapy in a short time, generally a few minutes, to which image-guided radiation therapy is added. RapidArc has become a currently used technology in many centers, which use RapidArc technology to treat a large number of patients. Large and small hospitals use it to treat the most challenging cases, but more and more frequently for the most common cancers. The clinical use of RapidArc and VMAT technology is constantly growing. At present, a limited number of clinical data are published, mostly concerning planning and feasibility studies. Clinical outcome data are increasing for a few tumor sites, even if only a little. The purpose of this work is to discuss the current status of VMAT techniques in clinical use through a review of the published data of planning systems and clinical outcomes in several tumor sites. The study consisted of a systematic review based on analysis of manuscripts retrieved from the PubMed, BioMed Central, and Scopus databases by searching for the keywords "RapidArc", "Volumetric modulated arc radiotherapy", and "Intensity-modulated radiotherapy". Keywords: IMRT, VMAT, SBRT, SRS, treatment planning software 

  10. Radiation utilization in technology; Strahlungsanwendung in der Technik

    Energy Technology Data Exchange (ETDEWEB)

    Spiess, Lothar [Technische Univ. Ilmenau (Germany). Inst. fuer Werkstofftechnik

    2013-04-01

    In the course of the harmonization of the European legislation for the radiation protection the German radiation protection law must be adapted. RoeV and StrlSchV must be summarized to only one law. The education in the technical instruction can play here a pioneering role. In the course of this absolutely necessary new adjustment the law and directives texts must follow the technical progress and the developing state of the technology more unambiguously. Currently too many technical instruction groups are established in the radiation protection and partly wrong technical definitions are used. This leads partly to incorrect approval conditions using technical radiation sources. (orig.)

  11. The difference between energy consumption and energy cost: Modelling energy tariff structures for water resource recovery facilities.

    Science.gov (United States)

    Aymerich, I; Rieger, L; Sobhani, R; Rosso, D; Corominas, Ll

    2015-09-15

    The objective of this paper is to demonstrate the importance of incorporating more realistic energy cost models (based on current energy tariff structures) into existing water resource recovery facilities (WRRFs) process models when evaluating technologies and cost-saving control strategies. In this paper, we first introduce a systematic framework to model energy usage at WRRFs and a generalized structure to describe energy tariffs including the most common billing terms. Secondly, this paper introduces a detailed energy cost model based on a Spanish energy tariff structure coupled with a WRRF process model to evaluate several control strategies and provide insights into the selection of the contracted power structure. The results for a 1-year evaluation on a 115,000 population-equivalent WRRF showed monthly cost differences ranging from 7 to 30% when comparing the detailed energy cost model to an average energy price. The evaluation of different aeration control strategies also showed that using average energy prices and neglecting energy tariff structures may lead to biased conclusions when selecting operating strategies or comparing technologies or equipment. The proposed framework demonstrated that for cost minimization, control strategies should be paired with a specific optimal contracted power. Hence, the design of operational and control strategies must take into account the local energy tariff.

  12. UTILITY ADVANCED TURBINE SYSTEMS (ATS) TECHNOLOGY READINESS TESTING

    Energy Technology Data Exchange (ETDEWEB)

    Unknown

    1998-10-01

    The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between Ge and the US Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed, including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially be GE. This change has resulted from DOE's request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include full speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown. This report summarizes work accomplished from 4Q97 through 3Q98.

  13. Utility Advanced Turbine Systems (ATS) Technology Readiness Testing

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-10-29

    The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the U.S. Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed, including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially by GE. This change has resulted from DOE's request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include full speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown in Figure 1-1. This report summarizes work accomplished in 2Q98. The most significant accomplishments are listed in the report.

  14. Utility Advanced Turbine Systems (ATS) technology readiness testing

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the US Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed, including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially by GE. This change has resulted horn DOE's request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include fill speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown.

  15. 19 CFR 10.778 - Filing of claim for tariff preference level.

    Science.gov (United States)

    2010-04-01

    ... Free Trade Agreement Tariff Preference Level § 10.778 Filing of claim for tariff preference level. A... under § 10.770 of this subpart may nevertheless be entitled to preferential tariff treatment under...

  16. 19 CFR 10.818 - Filing of claim for tariff preference level.

    Science.gov (United States)

    2010-04-01

    ... Free Trade Agreement Tariff Preference Level § 10.818 Filing of claim for tariff preference level. A... originating good under § 10.810 of this subpart may nevertheless be entitled to preferential tariff...

  17. Diesel Engine Waste Heat Recovery Utilizing Electric Turbocompound Technology

    Energy Technology Data Exchange (ETDEWEB)

    Hopman, Ulrich,; Kruiswyk, Richard W.

    2005-07-05

    Caterpillar's Technology & Solutions Division conceived, designed, built and tested an electric turbocompound system for an on-highway heavy-duty truck engine. The heart of the system is a unique turbochargerr with an electric motor/generator mounted on the shaft between turbine and compressor wheels. When the power produced by the turbocharger turbine exceeds the power of the compressor, the excess power is converted to electrical power by the generator on the turbo shaft; that power is then used to help turn the crankshaft via an electric motor mounted in the engine flywheel housing. The net result is an improvement in engine fuel economy. The electric turbocompound system provides added control flexibility because it is capable of varying the amount of power extracted from the exhaust gases, thus allowing for control of engine boost. The system configuration and design, turbocharger features, control system development, and test results are presented.

  18. Development of HANARO Activation Analysis System and Utilization Technology

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Y. S.; Moon, J. H.; Cho, H. J. (and others)

    2007-06-15

    1. Establishment of evaluation system using a data for a neutron activation analysis : Improvement of NAA measurement system and its identification, Development of combined data evaluation code of NAA/PGAA, International technical cooperation project 2. Development of technique for a industrial application of high precision gamma nuclide spectroscopic analysis : Analytical quality control, Development of industrial application techniques and its identification 3. Industrial application research for a prompt gamma-ray activation analysis : Improvement of Compton suppression counting system (PGAA), Development of applied technology using a PGAA system 4. Establishment of NAA user supporting system and KOLAS management : Development and validation of KOLAS/ISO accreditation testing and identification method, Cooperation researches for a industrial application, Establishment of integrated user analytical supporting system, Accomplishment of sample irradiation facility.

  19. UTILITY ADVANCED TURBINE SYSTEMS (ATS) TECHNOLOGY READINESS TESTING

    Energy Technology Data Exchange (ETDEWEB)

    Unknown

    1999-04-01

    The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the U.S. Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed, including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer conflation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially by GE. This change has resulted from DOE's request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include full speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. The objective of this task is to design 7H and 9H compressor rotor and stator structures with the goal of achieving high efficiency at lower cost and greater durability by applying proven GE Power Systems (GEPS) heavy-duty use design practices. The designs will be based on the GE Aircraft Engines (GEAE) CF6-80C2 compressor. Transient and steady-state thermo-mechanical stress analyses will be run to ensure compliance with GEPS life standards. Drawings will be prepared for forgings, castings, machining, and instrumentation for full speed, no load (FSNL) tests of the first unit on both 9H and 7H applications.

  20. Welfare-maximizing and revenue-maximizing tariffs with a few domestic firms

    OpenAIRE

    Bruno Larue; Jean-Philippe Gervais

    2002-01-01

    In this paper we compare the orthodox optimal tariff formula with the appropriate welfare-maximizing tariff when there are a few producing or importing firms. The welfare-maximizing tariff can be very low, voire negative in some cases, while in others it can even exceed the maximum-revenue tariff. The relationship between the welfare-maximizing tariff and the number of firms need not be monotonically increasing, because the tariff is not strictly used to internalize terms of trade externality...

  1. Utility of databases and information technology in pediatric neurology.

    Directory of Open Access Journals (Sweden)

    Panigrahi I

    2002-04-01

    Full Text Available Significant number of neurological patients in the pediatric age group have genetic and/or metabolic basis. It is difficult to remember details of each of them as their number is very large and the disorders are encountered infrequently. This impracticality necessitates the use of various websites and data base search. The internet has become a tool by which one can obtain and disseminate information. It has enhanced the medical person′s ability to know at the earliest the developments in different medical specialities. Furthermore, these rare disorders are being recognized on the basis of specialized tests available only at selected centres which deal with few of these disorders. Our objective is to provide pediatric neurologists easy access to the expanding body of medical information and also to make them aware of the advancements in information technology, which is likely to facilitate telemedicine as a future consultancy service. Information about these diseases can also be facilitated by e-consultations.

  2. Tariff based value of wind energy

    Energy Technology Data Exchange (ETDEWEB)

    Raekkoelaeinen, J.; Vilkko, M.; Antila, H.; Lautala, P. [Tampere Univ. of Technology (Finland)

    1995-12-31

    In this article an approach for determining a value of wind energy is presented. Calculation is based on wholesale tariffs, i.e. the value of wind energy is defined in comparison with other purchase. This approach can be utilised as an aid in the investment planning in defining the benefits of new wind generation capacity. Linear programming optimization method is used. A case study is presented for different wind scenarios. The value of wind energy can vary remarkably depending on timing of power output. (author)

  3. Factors shaping effective utilization of health information technology in urban safety-net clinics.

    Science.gov (United States)

    George, Sheba; Garth, Belinda; Fish, Allison; Baker, Richard

    2013-09-01

    Urban safety-net clinics are considered prime targets for the adoption of health information technology innovations; however, little is known about their utilization in such safety-net settings. Current scholarship provides limited guidance on the implementation of health information technology into safety-net settings as it typically assumes that adopting institutions have sufficient basic resources. This study addresses this gap by exploring the unique challenges urban resource-poor safety-net clinics must consider when adopting and utilizing health information technology. In-depth interviews (N = 15) were used with key stakeholders (clinic chief executive officers, medical directors, nursing directors, chief financial officers, and information technology directors) from staff at four clinics to explore (a) nonhealth information technology-related clinic needs, (b) how health information technology may provide solutions, and (c) perceptions of and experiences with health information technology. Participants identified several challenges, some of which appear amenable to health information technology solutions. Also identified were requirements for effective utilization of health information technology including physical infrastructural improvements, funding for equipment/training, creation of user groups to share health information technology knowledge/experiences, and specially tailored electronic billing guidelines. We found that despite the potential benefit that can be derived from health information technologies, the unplanned and uninformed introduction of these tools into these settings might actually create more problems than are solved. From these data, we were able to identify a set of factors that should be considered when integrating health information technology into the existing workflows of low-resourced urban safety-net clinics in order to maximize their utilization and enhance the quality of health care in such settings.

  4. Radiofrequency exposure from wireless LANs utilizing Wi-Fi technology.

    Science.gov (United States)

    Foster, Kenneth R

    2007-03-01

    This survey measured radiofrequency (RF) fields from wireless local area networks (WLANs) using Wi-Fi technology against a background of RF fields in the environment over the frequency range 75 MHz-3 GHz. A total of 356 measurements were conducted at 55 sites (including private residences, commercial spaces, health care and educational institutions, and other public spaces) in four countries (U.S., France, Germany, Sweden). Measurements were conducted under conditions that would result in the higher end of exposures from such systems. Where possible, measurements were conducted in public spaces as close as practical to the Wi-Fi access points. Additional measurements were conducted at a distance of approximately 1 m from a laptop while it was uploading and downloading large files to the WLAN. This distance was chosen to allow a useful comparison of fields in the far-field of the antenna in the laptop, and give a representative measure of the exposure that a bystander might receive from the laptop. The exposure to the user, particularly if the antenna of the client card were placed against his or her body, would require different measurement techniques beyond the scope of this study. In all cases, the measured Wi-Fi signal levels were very far below international exposure limits (IEEE C95.1-2005 and ICNIRP) and in nearly all cases far below other RF signals in the same environments. An discusses technical aspects of the IEEE 802.11 standard on which WLANs operate that are relevant to determining the levels of RF energy exposure from WLANs. Important limiting factors are the low operating power of client cards and access points, and the low duty cycle of transmission that normally characterizes their operation.

  5. Intergenerational welfare effects of a tariff under monopolistic competition

    NARCIS (Netherlands)

    Bettendorf, LJH; Heijdra, BJ

    2001-01-01

    A dynamic overlapping-generations model of a semi-small open economy with monopolistic competition in the goods market is constructed. A tariff increase reduces real output and employment and improves the terms of trade, both in the impact period and in the new steady state. The tariff shock has sig

  6. Intergenerational welfare effects of a tariff under monopolistic competition

    NARCIS (Netherlands)

    L.J.H. Bettendorf (Leon); B.J. Heijdra (Ben)

    2003-01-01

    textabstractA dynamic overlapping-generations model of a semi-small open economy with monopolistic competition in the goods market is constructed. A tariff increase reduces real output and employment and improves the terms of trade, both in the impact period and in the new steady state. The tariff s

  7. 14 CFR 221.212 - Special tariff permission.

    Science.gov (United States)

    2010-01-01

    ... in the Government Filing File and the Filing Advice Status File, and shall be referenced in such a... in the Government Filing File and the Filing Advice Status File. (d) When the paper portion of a...) When a filer submits an electronic tariff or an amendment to an electronic tariff for which authority...

  8. 7 CFR 735.107 - Warehouse charges and tariffs.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 7 2010-01-01 2010-01-01 false Warehouse charges and tariffs. 735.107 Section 735.107... AGRICULTURE REGULATIONS FOR WAREHOUSES REGULATIONS FOR THE UNITED STATES WAREHOUSE ACT Warehouse Licensing § 735.107 Warehouse charges and tariffs. (a) A warehouse operator must not make any unreasonable...

  9. A Comparison Between Chinese and Foreign Power Tariffs

    Institute of Scientific and Technical Information of China (English)

    Li Ying

    2007-01-01

    @@ With deepened reform of power system and marketization, power tariff has more and more become a topic of discussion, and furthermore, that the power tariff in China is high or low, reasonable or unreasonable is a top hot spot of the society.

  10. Examination of incentive mechanisms for innovative technologies applicable to utility and nonutility power generators

    Energy Technology Data Exchange (ETDEWEB)

    McDermott, K.A. [Illinois Commerce Commission, Springfield, IL (United States); Bailey, K.A.; South, D.W. [Argonne National Lab., IL (United States). Environmental Assessment and Information Sciences Div.

    1993-08-01

    Innovative technologies, built by either utility or nonutility power generators, have the potential to lower costs with less environmental emissions than conventional technologies. However, the public-good nature of information, along with uncertain costs, performance, and reliability, discourages rapid adoption of these technologies. The effect of regulation of electricity production may also have an adverse impact on motivation to innovate. Slower penetration of cleaner, more efficient technologies could result in greater levels of pollution, higher electricity prices, and a reduction in international competitiveness. Regulatory incentives could encourage adoption and deployment of innovative technologies of all kinds, inducting clean coal technologies. Such incentives must be designed to offset risks inherent in innovative technology and encourage cost-effective behavior. To evaluate innovative and conventional technologies equally, the incremental cost of risk (ICR) of adopting the innovative technology must be determined. Through the ICR, the magnitude of incentive required to make a utility (or nonutility) power generator equally motivated to use either conventional or innovative technologies can be derived. Two technology risks are examined: A construction risk, represented by a 15% cost overrun, and an operating risk, represented by a increased forced outage rate (decreased capacity factor). Different incentive mechanisms and measurement criteria are used to assess the effects of these risks on ratepayers and shareholders. In most cases, a regulatory incentive could offset the perceived risks while encouraging cost-effective behavior by both utility and nonutility power generators. Not only would the required incentive be recouped, but the revenue requirements would be less for the innovative technology; also, less environmental pollution would be generated. In the long term, ratepayers and society would benefit from innovative technologies.

  11. INCIDENTAL PROTECTION: AN EXAMINATION OF THE MORRILL TARIFF

    Directory of Open Access Journals (Sweden)

    Jane Flaherty

    2001-01-01

    Full Text Available Historians refer to the Morrill Tariff as the first statement of the nascent Republican party’s protectionist agenda, yet an analysis of the measure reveals that this enduring icon of historiography needs modification. Implemented as a direct response to the fiscal crisis created by the Buchanan administration, the Morrill Tariff represents a bipartisan effort to augment federal revenue for a depleted Treasury. Both President James Buchanan and many of his Democratic colleagues in Congress urged revising the Tariff of 1857 to arrest the growth of the federal deficit. However, the bitter rhetoric that accompanied the secession crisis has obscured the true nature of this short-lived, but important, revenue measure. An examination of the Morrill Tariff and the circumstances surrounding its passage demonstrate that it re-established the rates from the free trade Tariff of 1846 while providing incidental protection for select industries, a practice accepted, even advocated, by the Democratic party for over a decade.

  12. The Theory of Political Tariff Protection for Agricultural Sector in Developing Countries

    Directory of Open Access Journals (Sweden)

    Yaser Feizabadi

    2014-03-01

    Full Text Available This paper aims to analyze tariff protection policies in the agricultural sector of developing countries. The agricultural tariff structure in developing countries is characterized by: i high average tariffs, ii the existence of tariff escalation, iii dispersion of nominal tariffs across tariff lines, and iv a wide gap between average nominal tariffs and import-weighted average tariffs. Consequently, some features can be extracted that are consistent with the observed patterns of tariff protection in developing countries: i escalation of nominal tariff rates with the degree of processing, ii higher average tariffs in the agricultural sector compared to agriculture in developed countries, and iii higher non-agricultural than agricultural tariff protection. Here the Theory of Political Tariff Protection for Agricultural Sector in developing countries is described. This theory allows us to identify two sets of products. Agricultural products for which tariffs are higher than their political fitted values, therefore, tariff cuts should occur in a long period of time and for which tariffs are higher than their political fitted values therefore tariff reductions would not be politically costly.

  13. Final Technical Report Laramie County Community College: Utility-Scale Wind Energy Technology

    Energy Technology Data Exchange (ETDEWEB)

    Douglas P. Cook

    2012-05-22

    The Utility-Scale Wind Energy Technology U.S. Department of Energy (DOE) grant EE0000538, provided a way ahead for Laramie County Community College (LCCC) to increase educational and training opportunities for students seeking an Associate of Applied Science (AAS) or Associate of Science (AS) degree in Wind Energy Technology. The DOE grant enabled LCCC to program, schedule, and successfully operate multiple wind energy technology cohorts of up to 20-14 students per cohort simultaneously. As of this report, LCCC currently runs four cohorts. In addition, the DOE grant allowed LCCC to procure specialized LABVOLT electronic equipment that directly supports is wind energy technology curriculum.

  14. Utility rates and service policies as potential barriers to the market penetration of decentralized solar technologies

    Energy Technology Data Exchange (ETDEWEB)

    Feuerstein, R. J.

    1979-08-01

    At present, economic and institutional concerns dictate that decentralized solar technologies generally require an auxiliary energy source to assure continuous service through periods of adverse weather. Utility rates and service policies regarding auxiliary energy service have a significant impact upon solar system economics, and thus the commercialization of solar energy. The scope of this paper evaluates three basic issues: (1) whether a utility can refuse to provide auxiliary service to solar users, (2) whether a utility can charge higher or lower than traditional rates for auxiliary service, and (3) whether a utility can refuse to purchase excess power generated by small power producers utilizing electricity-producing solar technologies. It appears that a utility cannot refuse to provide auxiliary service to a solar user unless the company can demonstrate that to provide such service, substantial harm would result to its existing customers. Statutes or case decisions also provide that utilities cannot unreasonably discriminate in rates charged to customers for the same service under like conditions. The ability of a utility to provide solar users lower than traditional rates may depend upon the jurisdiction's view of promotional rates. 681 references.

  15. Analysis of utilization technologies for Eichhornia crassipes biomass harvested after restoration of wastewater.

    Science.gov (United States)

    Feng, Wei; Xiao, Kai; Zhou, Wenbing; Zhu, Duanwei; Zhou, Yiyong; Yuan, Yu; Xiao, Naidong; Wan, Xiaoqiong; Hua, Yumei; Zhao, Jianwei

    2017-01-01

    Eichhornia crassipes (EC, water hyacinth) has gained attention due to its alarming reproductive capacity, which subsequently leads to serious ecological damage of water in many eutrophic lakes in the world. The traditional mechanical removal methods have disadvantages. They squander this valuable lignocellulosic resource. Meanwhile, there is a bottleneck for the subsequently reasonable and efficient utilization of EC biomass on a large scale after phytoremediation of polluted water using EC. As a result, the exploration of effective EC utilization technologies has become a popular research field. After years of exploration and amelioration, there have been significant breakthroughs in this research area, including the synthesis of excellent EC cellulose-derived materials, innovative bioenergy production, etc. This review organizes the research of the utilization of the EC biomass among several important fields and then analyses the advantages and disadvantages for each pathway. Finally, comprehensive EC utilization technologies are proposed as a reference. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. Sensor Acquisition for Water Utilities: Survey, Down Selection Process, and Technology List

    Energy Technology Data Exchange (ETDEWEB)

    Alai, M; Glascoe, L; Love, A; Johnson, M; Einfeld, W

    2005-06-29

    The early detection of the biological and chemical contamination of water distribution systems is a necessary capability for securing the nation's water supply. Current and emerging early-detection technology capabilities and shortcomings need to be identified and assessed to provide government agencies and water utilities with an improved methodology for assessing the value of installing these technologies. The Department of Homeland Security (DHS) has tasked a multi-laboratory team to evaluate current and future needs to protect the nation's water distribution infrastructure by supporting an objective evaluation of current and new technologies. The LLNL deliverable from this Operational Technology Demonstration (OTD) was to assist the development of a technology acquisition process for a water distribution early warning system. The technology survey includes a review of previous sensor surveys and current test programs and a compiled database of relevant technologies. In the survey paper we discuss previous efforts by governmental agencies, research organizations, and private companies. We provide a survey of previous sensor studies with regard to the use of Early Warning Systems (EWS) that includes earlier surveys, testing programs, and response studies. The list of sensor technologies was ultimately developed to assist in the recommendation of candidate technologies for laboratory and field testing. A set of recommendations for future sensor selection efforts has been appended to this document, as has a down selection example for a hypothetical water utility.

  17. The disappearing utility workforce : are aging personnel a human resources problem or a technology opportunity?

    Energy Technology Data Exchange (ETDEWEB)

    Kitterman, B.; Dugan, J. [LogicaCMG, Houston, TX (United States)

    2006-03-15

    The retirement of a large cohort of skilled workers in the electricity industry may provide an opportunity for utilities to improve their financial performance. Personnel related expenses have continued to squeeze profit margins at many utilities. In order to achieve annual earnings improvement targets of 10-15 per cent, many utilities have had no alternative but to reduce ongoing operational expenses. However, with nearly a third of the industry eligible to retire within the next 5 years, personnel cuts are no longer warranted. This article examined ways in which innovative technology can drive improvements in utilities to reduce future costs, make better use of reduced staffs and capture the knowledge base of skilled workers before their departure. The high performance utility of the future must commit to a program of continuous process improvement. The use of design templates for light or medium construction activities can accommodate as much as 80 per cent of the design engineering workload and reduce the number of engineers required. A single dispatching technology was recommended to reduce redundant job roles and incorporate the scheduling of field personnel. A plug and play wireless communications architecture was recommended to manage the flow of data between the office and the field, as well as to maximize the throughput of utility radio wire line and wireless networks, and to assign priorities to time sensitive data. It was suggested that a wireless enterprise strategy should accommodate the management of multiple field devices as well as supporting server and communications hardware. It was concluded that strategic technologies will help utilities to institutionalize the knowledge of seasoned employees and help to develop a set of sustainable best practices. In addition, a new technology platform will unite all segments of utility operations within a single set of business goals. 2 figs.

  18. Analysis of the national scientific production on the utilization of digital technologies for nurses’ education

    Directory of Open Access Journals (Sweden)

    Viviane Rolim de Holanda

    2013-12-01

    Full Text Available The objective of this study was to seek evidence available in the national scientific literature regarding the utilization of digital teaching technologies in nurses’ education. The adopted research method was integrative literature review. The articles were selected on PubMed, LILACS, Medline, IBECS, and SciELO databases guided by the following question: what digital teaching technologies are used in nursing courses in Brazil? Eleven articles were selected. Results showed that the following were utilized: virtual learning environments, education software, interactive multimedia (CD-ROM, virtual simulations, hypertexts, digital games, websites, and virtual discussion groups (e-group/listservers. The evidence, in this study, shows that digital technologies are materials capable of optimizing knowledge acquisition complementary to traditional education, encouraging students to learning to learn. Descriptors: Education, Nursing; Teaching; Educational Technology; Nursing.

  19. Factors Influencing Adoption of Information Technology Infrastructure Library: Utilizing the Technology Acceptance Model (TAM)

    Science.gov (United States)

    Cox, Din S. Z.

    2013-01-01

    There is a shortage of evidence based research that provides organizations with the necessary information in support of their technology adoption decisions in relation to ITSM technologies. As such, this research study attempted to bridge the gap by offering insight on possible factors that could influence such decisions. An examination of…

  20. Factors Influencing Adoption of Information Technology Infrastructure Library: Utilizing the Technology Acceptance Model (TAM)

    Science.gov (United States)

    Cox, Din S. Z.

    2013-01-01

    There is a shortage of evidence based research that provides organizations with the necessary information in support of their technology adoption decisions in relation to ITSM technologies. As such, this research study attempted to bridge the gap by offering insight on possible factors that could influence such decisions. An examination of…

  1. ECONOMIC-POLITICAL DETERMINANTS OF IMPORT TARIFF UNIFICATION

    Directory of Open Access Journals (Sweden)

    S.A. Afontsev

    2005-09-01

    Full Text Available The economic-political determinants of the Russian import tariff reform in 2000 − 2001 years, leading up to partial unification of the import customs duties, are considered a With this purpose the model of tariff policy definition which considers the aspiration of the government to minimize the losses of tariff incomes caused by incorrect declaring of the goods by importers is constructed in the work. It is revealed, that reception of tariff incomes was the main motive at the development of tariff policy; the following on a degree of importance were the motives connected with increase of citizens well-being and attraction of support from business lobbies. As a whole, the government has established lower rates of the tariff for the goods with higher probability of incorrect declaring, and higher rates - for the goods which otherwise could be used as a "screen" for incorrectly declared goods. At the same time significant opportunities for the further unification of import duties which can serve as perspective strategy of tariff policy during a transition period after Russian connection to WTO are kept.

  2. Non-tariff Protectionism in EU Countries and Ukraine

    Directory of Open Access Journals (Sweden)

    Melnyk Tetyana M.

    2014-01-01

    Full Text Available The article assesses positions of the European Union as an integration association in international trade, studies the system of non-tariff regulation in EU countries and identifies key problems of harmonisation of the Ukrainian legislation to the European one in the sphere of non-tariff regulation of international trade. In order to assess scales of application of non-tariff measures in foreign trade, the article analyses the index of coverage and frequency of use of non-tariff restrictions, dynamics of initiated non-tariff measures and trade structure of their distribution, and also detects reasons of application of non-tariff restrictions. The article characterises the system of technical regulation of EU and assesses main steps of Ukraine on the way of bringing the domestic standards in correspondence with the European ones as a necessary condition for increase of export of domestic products and increase of its competitiveness. The prospect of further scientific studies in this direction lies in forecasting influence of non-tariff restrictions upon volumes of import and export flows in foreign trade.

  3. Electric energy tariffs - critical analysis and methodological proposition; Estrutura de tarifas de energia eletrica. Analise critica e proposicoes metodologicas

    Energy Technology Data Exchange (ETDEWEB)

    Fugimoto, Sergio Kinya

    2010-07-01

    Currently, the electric energy sector is preparing for the third round of the distributors tariff revisions. Since the regulatory environment is more consolidated in terms of required revenue, the agents are turning their attention to the necessary adjustment and correction of the tariff structure. In fact, ANEEL (regulatory agency) set topics for R and D projects considered strategic for the development of national energy sector, among them, the Tariff Structure Project. Recently, the regulatory agency also announced public hearings dealing with the costs allocation, price signals and tariffs for low-voltage consumers. In line with this debate, the thesis finds to analyze the methodology for calculating tariffs, systematizing knowledge dispersed in various references. For this, it discusses the major aspects of peak pricing theory, including American, British and French approaches, and researches the connection between the logic built into the costs allocation by hour and the criteria for electricity distribution system planning. Aiming to reflect the costs of each customer type, indicating a better utilization of the distribution system, are proposed improvements and innovation whose highlights are: shifting the idea that expansion costs should be only allocated in peak time of the system, setting the periods after calculating the costs, changing how to derive the reference charges by average aggregation of the costs and applying the methodology on altered load curves. Finally, this thesis seeks to prove that the current methodology, although designed by the time in which the electricity sector was aggregated, can be adapted according to the proposed improvements and innovations, and thus applied to the current environment in which electric energy businesses and tariffs are separated in generation, transmission, and distribution and retail areas. (author)

  4. Feed-in tariff outlook in Malaysia

    Energy Technology Data Exchange (ETDEWEB)

    Chua, Shing Chyi; Oh, Tick Hui [Faculty of Engineering and Technology, Multimedia University, Bukit Beruang, 75450 Melaka (Malaysia); Goh, Wei Wei [Foundation Studies and Extension Education, Multimedia University, Bukit Beruang, 75450 Melaka (Malaysia)

    2011-01-15

    This paper aims to present the feed-in tariff (FiT) outlook in Malaysia, which is in the process of being enacted through a Renewable Energy (RE) Policy by the Government of Malaysia (GoM). A brief in policies leading towards the RE policy and the potential of each RE sources under FiT mechanism have been discussed. The successful utilisation of RE source in electricity generation and the FiT implementation globally are positive indicators to implement FiT in Malaysia. Potentials of FiT on biomass, biogas and solid waste energy are currently very promising in Malaysia, but it is solar energy which is predicted to be the main RE of the future, surpassing all other REs. (author)

  5. 19 CFR 10.421 - Goods eligible for tariff preference claims.

    Science.gov (United States)

    2010-04-01

    ... Free Trade Agreement Tariff Preference Level § 10.421 Goods eligible for tariff preference claims. The... to 5516) that meet the applicable conditions for preferential tariff treatment under the US-CFTA... conditions for preferential tariff treatment under the US-CFTA other than the condition that they...

  6. 19 CFR 10.779 - Goods eligible for tariff preference claims.

    Science.gov (United States)

    2010-04-01

    ... Free Trade Agreement Tariff Preference Level § 10.779 Goods eligible for tariff preference claims. The... applicable conditions for preferential tariff treatment under the MFTA, other than the condition that they... for preferential tariff treatment under the MFTA, other than the condition that they are...

  7. 19 CFR 10.521 - Goods eligible for tariff preference level claims.

    Science.gov (United States)

    2010-04-01

    ... States-Singapore Free Trade Agreement Tariff Preference Level § 10.521 Goods eligible for tariff... United States, and that meet the applicable conditions for preferential tariff treatment under the SFTA, other than the condition that they are originating goods. The preferential tariff treatment is...

  8. Global effects of accelerated tariff liberalization in the forest products sector to 2010.

    Science.gov (United States)

    Shushuai Zhu; Joseph Buongiorno; David J. Brooks

    2002-01-01

    This study projects the effects of tariff elimination on the world sector. Projections were done for two scenarios: (1) progressive tariff elimination according to the schedule agreed to under the current General Agreement on Tariff or Trade (GATT) and (2) complete elimination of tariff on wood products as proposed within the Asia-Pacific Economic Cooperation (APEC)...

  9. Tariff discrimination on Brazil's soluble coffee: an economic analysis

    Directory of Open Access Journals (Sweden)

    Marislei Nishijima

    2010-06-01

    Full Text Available This article evaluates the impacts of the imposition of tariffs on the Brazilian soluble coffee mainly by European countries as of the 1990s. More particularly, it verifies whether the imposition of discriminatory trade tariffs by the European Union and of non-discriminatory ones by some Eastern European countries reflects on the international demand for this commodity. For this purpose, dynamic models of global demand for Brazilian soluble coffee were estimated for the 1995-2003 period using data from the International Coffee Organization. Findings suggest that existing tariffs significantly account for the reduction of Brazilian share of soluble in the world market.

  10. Evaluation of technology modifications required to apply clean coal technologies in Russian utilities. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    The report describes the following: overview of the Russian power industry; electric power equipment of Russia; power industry development forecast for Russia; clean coal technology demonstration program of the US Department of Energy; reduction of coal TPS (thermal power station) environmental impacts in Russia; and base options of advanced coal thermal power plants. Terms of the application of clean coal technology at Russian TPS are discussed in the Conclusions.

  11. Indirect Load Control for Energy Storage Systems Using Incentive Pricing under Time-of-Use Tariff

    Directory of Open Access Journals (Sweden)

    Mu-Gu Jeong

    2016-07-01

    Full Text Available Indirect load control (ILC is a method by which the customer determines load reduction of electricity by using a price signal. One of the ILCs is a time-of-use (TOU tariff, which is the most commonly used time-varying retail pricing. Under the TOU tariff, the customer can reduce the energy cost through an energy storage system (ESS. However, because this tariff is fixed for several months, the ESS operation does not truly reflect the wholesale market price, which could widely fluctuate. To overcome this limitation, this paper proposes an incentive pricing method in which the load-serving entity (LSE gives the incentive pricing signal to the customers with ESSs. Because the ESS charging schedule is determined by the customer through ILC, a bilevel optimization problem that includes the customer optimization problem is utilized to determine the incentive pricing signal. Further, the bilevel optimization problem is reformulated into a one-level problem to be solved by an interior point method. In the proposed incentive scheme: (1 the social welfare increases and (2 the increased social welfare can be equitably divided between the LSE and the customer; and (3 the proposed incentive scheme leads the customer to voluntarily follow the pricing signal.

  12. Academic Staff Utilization of Information and Communication Technology and Knowledge Creation in Cross River State Universities

    Science.gov (United States)

    Ekpoh, Uduak Imo; Etor, Comfort Robert

    2012-01-01

    This study examined academic staff utilization of Information and Communication Technology (ICT) in knowledge creation in universities in Cross River State. The study was guided by two research questions and one hypothesis. A questionnaire was developed, validated and used for data collection from a sample of 300 academic staff. Descriptive…

  13. Utilizing Technology Effectively to Improve Millennials' Educational Performance: An Exploratory Look at Business Students' Perceptions

    Science.gov (United States)

    Aviles, Maria; Eastman, Jacqueline K.

    2012-01-01

    Purpose: The purpose of this paper is to discuss how technological tools, such as Web 2.0 and online learning management systems, can be utilized to improve Millennials' educational performance. Design/methodology/approach: An exploratory survey of Millennial business students was conducted to measure their self-reported use and perceived…

  14. Utilizing Technology Effectively to Improve Millennials' Educational Performance: An Exploratory Look at Business Students' Perceptions

    Science.gov (United States)

    Aviles, Maria; Eastman, Jacqueline K.

    2012-01-01

    Purpose: The purpose of this paper is to discuss how technological tools, such as Web 2.0 and online learning management systems, can be utilized to improve Millennials' educational performance. Design/methodology/approach: An exploratory survey of Millennial business students was conducted to measure their self-reported use and perceived…

  15. Enhancing the Utilization of Information Communication Technology (ICT) among Home Economics Lecturers in South Eastern Nigeria

    Science.gov (United States)

    Ejinkeonye, Uju Bridget; Usoroh, Comfort I.

    2016-01-01

    The study was on enhancing the utilization of information communication Technology (ICT) among Home Economics lecturers in south Eastern Nigeria. The study adopted a survey method. The area of the study is south eastern Nigeria. Three research questions guided the study. The population was made up of 63 Home Economics lecturers from the six…

  16. Technology utilization in a non-urban region: Further impact and technique of the Technology Use Studies Center, 2

    Science.gov (United States)

    Gold, H. C. (Editor); Moore, A. M.; Dodd, B.; Dittmar, V.

    1971-01-01

    The clientele served by the Technology Use Studies Center (TUSC) is updated. Manufacturing leads the list of client firms. The standard industrial classification (SIC) range of these firms is broad. Substantial numbers of college and university faculties are using TUSC services. Field operations inherent in the functions of dissemination and assistance are reviewed. Increasing emphasis among clientele is on environmental concerns and management. A record is provided of the institutions contacted and the extent of TUSC involvement with them, as well as TUSC's cooperation with agencies and organizations. The impact of TUSC and the NASA-sponsored Technology Utilization Program on other public agencies is discussed.

  17. Carbon dioxide utilization: Bridging the GHG mitigation with environmentally friendly technologies

    Energy Technology Data Exchange (ETDEWEB)

    Aresta, M. [Univ. of Bari (Italy)

    1997-12-31

    The recovery of carbon dioxide from power plants, flue gases, or industrial processes has been proposed as a technology for its mitigation. The end fate of recovered CO{sub 2} is either disposal in natural fields or gainful utilization (biological, technological, or chemical). The latter option deserves careful consideration as it would be doubly beneficial, helping to control the carbon dioxide emission and to save natural resources through the recycling of carbon. The economical aspects of the utilization option need thorough analysis to determine its feasibility. Another major point to consider is the amount of avoided carbon dioxide. This will define the extent of mitigation possible via the utilization option. To assess the potential of carbon dioxide utilization in the short-, medium-, and long-term is an exercise of great value from both the environmental and economical points of view. In this paper, criteria for the assessment be discussed as well as the current status of industrial carbon dioxide utilization. Furthermore, the perspectives for carbon dioxide utilization will be framed within the research needed for its implementation.

  18. Energy Prices, Tariffs, Taxes and Subsidies in Ukraine

    Energy Technology Data Exchange (ETDEWEB)

    Evans, Meredydd

    2007-04-01

    For many years, electricity, gas and district heating tariffs for residential consumers were very low in Ukraine; until recently, they were even lower than in neighbouring countries such as Russia. The increases in gas and electricity tariffs, implemented in 2006, are an important step toward sustainable pricing levels; however, electricity and natural gas (especially for households) are still priced below the long-run marginal cost. The problem seems even more serious in district heating and nuclear power. According to the Ministry of Construction, district heating tariffs, on average, cover about 80% of costs. Current electricity prices do not fully include the capital costs of power stations, which are particularly high for nuclear power. Although the tariff for nuclear electricity generation includes a small decommissioning charge, it has not been sufficient to accumulate necessary funds for nuclear plants decommissioning.

  19. INNOVATIVE APPROACH IN THE COMPULSORY HEALTH INSURANCE TARIFF SETTING

    Directory of Open Access Journals (Sweden)

    M. Yu. Zasypkin

    2015-02-01

    Full Text Available Development of a single channel financing in the health system of the Russian Federation based on the standards of the compulsory health insurance (CHI requires a single channel financing of the health system through the CHI as one of the main direction using payment of the medical services in the form of so-called «full» tariff [1-12].It is not a secret that for many years the medical services tariff in the CHI system contained from only five items of expenditures (salary, charges on payroll, soft goods and clothing, medicines, bandages, other medical expenses, and food. On one hand, such defective tariff was based on the parallel government financing of the medical institutions (MIs, on the other hand, because of this tariff, the manager was hoppled in the control of the financial flows.

  20. Urban Water Tariffs in Spain: What Needs to Be Done?

    Directory of Open Access Journals (Sweden)

    Miguel A. García-Rubio

    2015-03-01

    Full Text Available Recently, in the context of the Integrated Water Resources Management, demand policies are playing a more important role as opposed to traditional supply policies based on the construction of large hydraulic infrastructures. In this new context, water tariffs have become an important tool in achieving economic efficiency, environmental sustainability, and social equity. This paper reviews the situation of urban water tariffs in Spain, a country subject to high water stress. It analyzes the capacity of urban water tariffs to recover service costs and to promote efficiency, sustainability, affordability, and equity. Although it has made significant progress in recent years, the Spanish urban water tariff system still faces many challenges. Many of these challenges would be better addressed by a national independent regulatory body.

  1. Tariff-Mediated Network Effects Versus Strategic Disounting

    DEFF Research Database (Denmark)

    Zucchini, Leon; Claussen, Jörg; Trüg, Moritz

    2013-01-01

    . Alternatively, research on strategic discounting suggests that small operators use on-net discounts to advertise with low on-net prices. We test the relative strength of these effects using data on tariff setting in German mobile telecommunications between 2001 and 2009. We find that large operators are more......Mobile telecommunication operators routinely charge subscribers lower prices for calls on their own network than for calls to other networks (on-net discounts). Studies on tariff-mediated network effects suggest this is due to large operators using on-net discounts to damage smaller rivals...... likely to offer tariffs with on-net discounts but there is no consistently significant difference in the magnitude of discounts. Our results suggest that tariff-mediated network effects are the main cause of on-net discounts....

  2. Desirable role in an international duopoly model with tariffs

    Science.gov (United States)

    Ferreira, Fernanda A.; Ferreira, Flávio

    2012-09-01

    In this paper, we study an international market model in which the home government imposes a tariff on the imported goods. The model has two stages. In the first stage, the home government chooses an import tariff to maximize a function that cares about the home firm's profit and the total revenue. Then, the firms engage in a Cournot or in a Stackelberg competition. We compare the results obtained in the three different ways of moving on the decision make of the firms.

  3. Urban Water Tariffs in Spain: What Needs to Be Done?

    OpenAIRE

    Miguel A. García-Rubio; Alberto Ruiz-Villaverde; Francisco González-Gómez

    2015-01-01

    Recently, in the context of the Integrated Water Resources Management, demand policies are playing a more important role as opposed to traditional supply policies based on the construction of large hydraulic infrastructures. In this new context, water tariffs have become an important tool in achieving economic efficiency, environmental sustainability, and social equity. This paper reviews the situation of urban water tariffs in Spain, a country subject to high water stress. It analyzes the ca...

  4. Farther Export Tariff Laid on Some RE Metallic Products

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ To further regulate the export of high-energy-consumption and high-pollution products and resources products, promote the import of energy products, resource products and key components and facilitate the trade balance, and approved by the 9th Meeting of Tariff Regulations Commission of the State Council, China would adjust the import and export tariff rate of some commodities since June 1st, 2007.

  5. Utility-Scale Concentrating Solar Power and Photovoltaic Projects: A Technology and Market Overview

    Energy Technology Data Exchange (ETDEWEB)

    Mendelsohn, M.; Lowder, T.; Canavan, B.

    2012-04-01

    Over the last several years, solar energy technologies have been, or are in the process of being, deployed at unprecedented levels. A critical recent development, resulting from the massive scale of projects in progress or recently completed, is having the power sold directly to electric utilities. Such 'utility-scale' systems offer the opportunity to deploy solar technologies far faster than the traditional 'behind-the-meter' projects designed to offset retail load. Moreover, these systems have employed significant economies of scale during construction and operation, attracting financial capital, which in turn can reduce the delivered cost of power. This report is a summary of the current U.S. utility-scale solar state-of-the-market and development pipeline. Utility-scale solar energy systems are generally categorized as one of two basic designs: concentrating solar power (CSP) and photovoltaic (PV). CSP systems can be further delineated into four commercially available technologies: parabolic trough, central receiver (CR), parabolic dish, and linear Fresnel reflector. CSP systems can also be categorized as hybrid, which combine a solar-based system (generally parabolic trough, CR, or linear Fresnel) and a fossil fuel energy system to produce electric power or steam.

  6. Developing Technologies for Space Resource Utilization: Concept for a Planetary Engineering Research Institute

    Science.gov (United States)

    Blacic, J. D.; Dreesen, D.; Mockler, T.

    2000-01-01

    There are two principal factors that control the economics and ultimate utilization of space resources: 1) space transportation, and 2) space resource utilization technologies. Development of space transportation technology is driven by major government (military and civilian) programs and, to a lesser degree, private industry-funded research. Communication within the propulsion and spacecraft engineering community is aided by an effective independent professional organization, the American Institute of Aeronautics and Astronautics (AIAA). The many aerospace engineering programs in major university engineering schools sustain professional-level education in these fields. NASA does an excellent job of public education in space science and engineering at all levels. Planetary science, a precursor and supporting discipline for space resource utilization, has benefited from the establishment of the Lunar and Planetary Institute (LPI) which has served, since the early post-Apollo days, as a focus for both professional and educational development in the geosciences of the Moon and other planets. The closest thing the nonaerospace engineering disciplines have had to this kind of professional nexus is the sponsorship by the American Society of Civil Engineers of a series of space engineering conferences that have had a predominantly space resource orientation. However, many of us with long-standing interests in space resource development have felt that an LPI-like, independent institute was needed to focus and facilitate both research and education on the specific engineering disciplines needed to develop space resource utilization technologies on an on-going basis.

  7. Market and behavioral barriers to energy efficiency: A preliminary evaluation of the case for tariff financing in California

    Energy Technology Data Exchange (ETDEWEB)

    Fujita, K. Sydny

    2011-06-23

    the number of outdated appliances, in California rental housing. Appliances in rental housing are on average older than those in owner occupied housing. More importantly, a substantial proportion of very old appliances are in rental housing. Having established that a very old stock of appliances exists in California rental housing, I discuss tariff financing as a policy option to reduce the impact of the remaining market and behavioral barriers. In a tariff financing program, the utility pays the initial cost of an appliance, and is repaid through subsequent utility bills. By eliminating upfront costs, tying repayment to the gas or electric meter, requiring a detailed energy audit, and relying upon utility bill payment history rather than credit score in determining participant eligibility, tariff financing largely overcomes many barriers to energy efficiency. Using California as a case study, I evaluate the feasibility of implementing tariff financing. For water heaters in particular, this appears to be a cost-effective strategy. Tariff financing from utilities is particularly valuable because it improves the ability of low-income renters to lower their utility bills, without burdening landlords with unrecoverable capital costs. To implement tariff financing country-wide, regulations in many states defining private loan-making institutions or the allowable use of public benefit funds may need to be modified. Tariff financing is relatively new and in most locations is only available as a pilot program or has only recently exited pilot phase. This preliminary evaluation suggests that tariff financing is a valuable future addition to the toolkit of policymakers who aim to increase the diffusion of efficient appliances. While regulatory approval is necessary in states that wish to pursue tariff financing, at this point, the major barrier to further implementation appears to be the newness of the financing mechanism.

  8. Coupling renewables via hydrogen into utilities: Temporal and spatial issues, and technology opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Iannucci, J.J.; Horgan, S.A.; Eyer, J.M. [Distributed Utility Associates, San Ramon, CA (United States)] [and others

    1996-10-01

    This paper discusses the technical potential for hydrogen used as an energy storage medium to couple time-dependent renewable energy into time-dependent electric utility loads. This analysis will provide estimates of regional and national opportunities for hydrogen production, storage and conversion, based on current and near-term leading renewable energy and hydrogen production and storage technologies. Appropriate renewable technologies, wind, photovoltaics and solar thermal, are matched to their most viable regional resources. The renewables are assumed to produce electricity which will be instantaneously used by the local utility to meet its loads; any excess electricity will be used to produce hydrogen electrolytically and stored for later use. Results are derived based on a range of assumptions of renewable power plant capacity and fraction of regional electric load to be met (e.g., the amount of hydrogen storage required to meet the Northwest region`s top 10% of electric load). For each renewable technology national and regional totals will be developed for maximum hydrogen production per year and ranges of hydrogen storage capacity needed in each year (hydroelectric case excluded). The sensitivity of the answers to the fraction of peak load to be served and the land area dedicated for renewable resources are investigated. These analyses can serve as a starting point for projecting the market opportunity for hydrogen storage and distribution technologies. Sensitivities will be performed for hydrogen production, conversion. and storage efficiencies representing current and near-term hydrogen technologies.

  9. Technological progress on detoxification and comprehensive utilization of chromium-containing slag

    Institute of Scientific and Technical Information of China (English)

    柴立元; 何德文; 于霞; 刘恢; 闵小波; 陈为亮

    2002-01-01

    Chromium salt is an important industrial material, but vast waste slag containing chrome(Ⅵ) is brought out in the process of its production. The slag is seriously harmful to environments and human health. The technologies on detoxification and comprehensive utilization of chromium-containing slag were summarized abroad and at home. And various methods were also described for the detoxification mechanism, technology process, and practical application effects in detail. A new concept for detoxification of chromium-containing slag, furthermore, was put forward by using microorganism.

  10. Time dependent tariff modell in the electricity sector; Tageszeitabhaengige Tarifmodelle im Sektor Strom

    Energy Technology Data Exchange (ETDEWEB)

    Franke, Susan [Westsaechsische Hochschule Zwickau (Germany)

    2010-07-01

    The contribution under consideration reports on the mechanism of price formation on the German power supply market. From the standpoint of progressive liberalization of this market in particular possibilities for the design of dynamic tariff models are discussed. Theoretical foundations form the design of incentive systems linked to the economic model of price formation. Existing concepts are discussed, and a concept for implementing in the project Low Energy Living is outlined. Thus, an incentive shall be supplied for consumers in order to break their previous habits and to help that the utilities can smooth out their load profile. Power customers benefit from this form of significant energy savings.

  11. Building Thermal Envelope Systems and Materials (BTESM) and research utilization/technology transfer

    Energy Technology Data Exchange (ETDEWEB)

    Burn, G. (comp.)

    1990-07-01

    The Monthly Report of the Building Thermal Envelope Systems and Materials (BTESM) Programs is a monthly update of both in-house ORNL projects and subcontract activities in the research areas of building materials, wall systems, foundations, roofs, building diagnostics, and research utilization and technology transfer. Presentations are not stand-alone paragraphs every month. Their principal values are the short-time lapse between accomplishment and reporting and their evolution over a period of several months..

  12. Electrical hand tools and techniques: A compilation. [utilization of space technology for tools and adapters

    Science.gov (United States)

    1974-01-01

    Space technology utilization for developing tools, adapters, and fixtures and procedures for assembling, installing, and servicing electrical components and equipment are discussed. Some of the items considered are: (1) pivotal screwdriver, (2) termination locator tool for shielded cables, (3) solder application tools, (4) insulation and shield removing tool, and (5) torque wrench adapter for cable connector engaging ring. Diagrams of the various tools and devices are provided.

  13. The Ef fects of Technology Usabilitiy and Individual Technology Readiness on Utilization of Electronic Document Management System (EDMS: A Research on Employee of University Hospital

    Directory of Open Access Journals (Sweden)

    Asuman Atilla

    2015-06-01

    Full Text Available Electronic Document Management System (EDMS is software which is utilized for writing, sending and storing, briefly managing the processes and operations of the corporations and institutions. In this empirical research, the statistical differences are investigated between users’ concerns about usability of mentioned technology, users’ technological readiness levels and users’ utilization status of EDMS sample is formed by 189 administrative staff of a university hospital in Ankara. According to findings, significant statistical differences are found between some dimensions of technology usability (usability effectiveness, learnability,helpfulness satisfaction, some dimensions of technology readiness (discomfort and insecurity and the utilization status (user, nonuser of EDMS.

  14. Management support services to the Office of Utility Technologies. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-16

    The Office of Utility Technologies works cooperatively with industry and the utility sector to realize the market potential for energy efficiency and renewable energy technologies. Under this contract, BNF has provided management support services for OUT R&D activities for the following Program offices: (1) Office of Energy Management; (2) Office of Solar Energy Conversion; (3) Office of Renewable Energy Conversion; and (4) Deputy Assistant Secretary. During the period between 4/17/91 and 9/17/93, BNF furnished the necessary personnel, equipment, materials, facilities and travel required to provide management support services for each of the above Program Offices. From 9/18/93 to 12/17/93, BNF has been involved in closeout activities, including final product deliverables. Research efforts that have been supported in these Program Offices are: (1) for Energy Management -- Advanced Utility Concepts Division; Utility Systems Division; Integrated Planning; (2) for Solar Energy Conversion -- Photovoltaics Division; Solar Thermal and Biomass Power Division; (3) for Renewable Energy Conversion -- Geothermal Division; Wind, Hydroelectric and Ocean Systems Division; (4) for the Deputy Assistant Secretary -- support as required by the Supporting Staff. This final report contains summaries of the work accomplished for each of the Program Offices listed above.

  15. Standard Lunar Regolith Simulants for Space Resource Utilization Technologies Development: Effects of Materials Choices

    Science.gov (United States)

    Sibille, Laurent; Carpenter, Paul K.

    2006-01-01

    As NASA turns its exploration ambitions towards the Moon once again, the research and development of new technologies for lunar operations face the challenge of meeting the milestones of a fastpace schedule, reminiscent of the 1960's Apollo program. While the lunar samples returned by the Apollo and Luna missions have revealed much about the Moon, these priceless materials exist in too scarce quantities to be used for technology development and testing. The need for mineral materials chosen to simulate the characteristics of lunar regoliths is a pressing issue that is being addressed today through the collaboration of scientists, engineers and NASA program managers. The issue of reproducing the properties of lunar regolith for research and technology development purposes was addressed by the recently held 2005 Workshop on Lunar Regolith Simulant Materials at Marshall Space Flight Center. The recommendation of the workshop of establishing standard simulant materials to be used in lunar technology development and testing will be discussed here with an emphasis on space resource utilization. The variety of techniques and the complexity of functional interfaces make these simulant choices critical in space resource utilization.

  16. Advanced Acid Gas Separation Technology for the Utilization of Low Rank Coals

    Energy Technology Data Exchange (ETDEWEB)

    Kloosterman, Jeff

    2012-12-31

    Air Products has developed a potentially ground-breaking technology – Sour Pressure Swing Adsorption (PSA) – to replace the solvent-based acid gas removal (AGR) systems currently employed to separate sulfur containing species, along with CO{sub 2} and other impurities, from gasifier syngas streams. The Sour PSA technology is based on adsorption processes that utilize pressure swing or temperature swing regeneration methods. Sour PSA technology has already been shown with higher rank coals to provide a significant reduction in the cost of CO{sub 2} capture for power generation, which should translate to a reduction in cost of electricity (COE), compared to baseline CO{sub 2} capture plant design. The objective of this project is to test the performance and capability of the adsorbents in handling tar and other impurities using a gaseous mixture generated from the gasification of lower rank, lignite coal. The results of this testing are used to generate a high-level pilot process design, and to prepare a techno-economic assessment evaluating the applicability of the technology to plants utilizing these coals.

  17. The Utilization of Urine Processing for the Advancement of Life Support Technologies

    Science.gov (United States)

    Grossi-Soyster, Elysse; Hogan, John; Flynn, Michael

    2014-01-01

    The success of long-duration missions will depend on resource recovery and the self-sustainability of life support technologies. Current technologies used on the International Space Station (ISS) utilize chemical and mechanical processes, such as filtration, to recover potable water from urine produced by crewmembers. Such technologies have significantly reduced the need for water resupply through closed-loop resource recovery and recycling. Harvesting the important components of urine requires selectivity, whether through the use of membranes or other physical barriers, or by chemical or biological processes. Given the chemical composition of urine, the downstream benefits of urine processing for resource recovery will be critical for many aspects of life support, such as food production and the synthesis of biofuels. This paper discusses the beneficial components of urine and their potential applications, and the challenges associated with using urine for nutrient recycling for space application.

  18. Systems analysis research for energy conversion and utilization technologies (ECUT). FY 1985 annual report

    Energy Technology Data Exchange (ETDEWEB)

    Eberhardt, J.J.; Gunn, M.E.; Levinson, T.M.

    1985-11-01

    This Annual Report highlights ECUT accomplishments in the Systems Analysis Project for FY 1985. The Systems Analysis Project was established in 1980 along with the ECUT Division. The Systems Analysis mission is to identify, analyze, and assess R and D needs and research program strategies for advanced conservation technologies. The PNL Systems Analysis staff conducts topical research, provides technical studies, and plans program activities in three areas related to energy conversion and utilization technologies: (1) technology assessment, (2) engineering analysis, and (3) project evaluation and review. This report summarizes the technical results and accomplishments of the FY 1985 projects. They relate mostly to tribology, improved ctalysts, regenerative heat exchangers, robotics and electronics industries, and bioprocessing.

  19. An Investigation of Factors Affecting Utilization of Information Technology (IT by Agricultural Students

    Directory of Open Access Journals (Sweden)

    Masoud Rezaei

    2012-03-01

    Full Text Available The present study was carried out with the aim of investigating factors affecting utilization of information technology by students of agriculture. A survey approach was used in this study and a questionnaire was developed to gather the data. The study population was postgraduate students (MS and PhD of economic and agricultural development faculty in Tehran University who were selected by applying random sampling technique. Sample size for students was 61 persons. Data was analyzed by using SPSS/WIN software. The results of the research indicated that there was a positive significant relationship between using of information technology by students and their age, average, prior experience, information technology skills, innovativeness, perceived ease of use, attitude and self-efficacy. The relationship between computer anxiety and using of IT was negative. Stepwise Regression Analysis showed that innovativeness and attitude predict 53.2 percent of variations of IT use by students.

  20. The development of uranium foil farication technology utilizing twin roll method for Mo-99 irradiation target

    CERN Document Server

    Kim, C K; Park, H D

    2002-01-01

    MDS Nordion in Canada, occupying about 75% of global supply of Mo-99 isotope, has provided the irradiation target of Mo-99 using the rod-type UAl sub x alloys with HEU(High Enrichment Uranium). ANL (Argonne National Laboratory) through co-operation with BATAN in Indonesia, leading RERTR (Reduced Enrichment for Research and Test Reactors) program substantially for nuclear non-proliferation, has designed and fabricated the annular cylinder of uranium targets, and successfully performed irradiation test, in order to develop the fabrication technology of fission Mo-99 using LEU(Low Enrichment Uranium). As the uranium foils could be fabricated in laboratory scale, not in commercialized scale by hot rolling method due to significant problems in foil quality, productivity and economic efficiency, attention has shifted to the development of new technology. Under these circumstances, the invention of uranium foil fabrication technology utilizing twin-roll casting method in KAERI is found to be able to fabricate LEU or...

  1. 6th Conference on Coal Utilization Technology; Dai 6 kai sekitan riyo gijutsu kaigi koenshu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-09-01

    The paper compiled the papers presented in the 6th Conference on Coal Utilization Technology held in September 1996. With relation to the fluidized bed boiler, reported were Field operation test of Wakamatsu PFBC combined cycle power plant and Development of pressurized internally circulating fluidized bed combustion technology. Regarding the coal reformation, Development of advanced coal cleaning process, Coal preparation and coal cleaning in the dry process, etc. Concerning the combustion technology, Study of the O2/CO2 combustion technology, Development of pressurized coal partial combustor, etc. About the CWM, Development of low rank coals upgrading and their CWM producing technology, Technique of CWM distribution system, etc. Relating to the coal ash, Engineering characteristics of the improved soil by deep mixing method using coal ash, Employment of fluidized bed ash as a basecourse material, On-site verification trials using fly ash for reclamation behind bulkheads, Water permeabilities of pulverized fuel ash, Separation of unburned carbon from coal fly ash through froth flotation, Practical use technology of coal ash (POZ-O-TEC), etc

  2. Policy of Tariff Protection in the Light of WTO Accession

    Directory of Open Access Journals (Sweden)

    MSc. Burim Gashi

    2014-06-01

    Full Text Available Tariff rates are crucial instrument of trade policy. This paper covers several important issues related to the reforms of this area. First part of the paper explains the key features of tariffs as protection instrument: different policy takers and opposite economic interests; benefits and adverse effects; alternative measures of protection; dependence of tariff policy on the development priorities and the welfare effects, etc. This document explains main World Trade Organization requirements concerning protection policy such as primary role of tariffs, restricted set of non-tariff instruments, limited scope of safeguard measures, comparison on the legal development in the field until now, and an indication of further legislation changes necessary in the period of adjustment. It also gives main elements of the customs-reform strategy: choice and concentration of goals and priorities; criteria for preparation of the alternative scenarios; solving convergence problems; defining conditionality for alternative solutions and interdependence of relevant externalities. The goal of the paper is to give recommendation for trade policy reform in our country necessarily to become member of World Trade Organization.

  3. Climate change : the case for a carbon tariff/tax

    Energy Technology Data Exchange (ETDEWEB)

    Courchene, T.J.; Allan, J.R. [Queen' s Univ., Kingston, ON (Canada). Inst. of Intergovernmental Relations

    2008-03-15

    Canada's ratification of the Kyoto Protocol will not adequately address the country's contribution to global climatic change. This paper proposed a 2-tier system consisting of internationally imposed carbon import tariffs combined with an equivalent domestic carbon tax. The approach was designed to engage global exporters and importers, while also involving governments and policy commitments related to emissions and cap-and-trade systems. Although a carbon tax on emissions is preferable to an opting-in approach, Canadian government has rejected carbon taxes due to the suspicion that Canadian companies will easily circumvent regulations. It is anticipated that many companies in carbon tax compliant countries will outsource production to non-compliant countries. The proposed approach required that carbon taxes will be applied to all domestically produced and consumed products, while tariffs will be levied against products from exporting firms. Outsourcing to take advantage of lax environmental policies in pollution havens will be subject to a carbon footprint tariff. The tariff will also serve to reduce the carbon content of exports. Proceeds of the tax can be used in a variety of ways to reduce greenhouse gas (GHG) emissions. It was concluded that Canada will need to supplement domestic carbon taxes with a proposed carbon import tariff. 1 fig.

  4. Photovoltaic technology for sustainability: An investigation of the distributed utility concept as a policy framework

    Science.gov (United States)

    Letendre, Steven Emery

    The U.S. electric utility sector in its current configuration is unsustainable. The majority of electricity in the United States is produced using finite fossil fuels. In addition, significant potential exists to improve the nation's efficient use of energy. A sustainable electric utility sector will be characterized by increased use of renewable energy sources and high levels of end-use efficiency. This dissertation analyzes two alternative policy approaches designed to move the U.S. electric utility sector toward sustainability. One approach is labeled incremental which involves maintaining the centralized structure of the electric utility sector but facilitating the introduction of renewable energy and efficiency into the electrical system through the pricing mechanism. A second policy approach was described in which structural changes are encouraged based on the emerging distributed utility (DU) concept. A structural policy orientation attempts to capture the unique localized benefits that distributed renewable resources and energy efficiency offer to electric utility companies and their customers. A market penetration analysis of PV in centralized energy supply and distributed peak-shaving applications is conducted for a case-study electric utility company. Sensitivity analysis was performed based on incremental and structural policy orientations. The analysis provides compelling evidence which suggests that policies designed to bring about structural change in the electric utility sector are needed to move the industry toward sustainability. Specifically, the analysis demonstrates that PV technology, a key renewable energy option likely to play an important role in a renewable energy future, will begin to penetrate the electrical system in distributed peak-shaving applications long before the technology is introduced as a centralized energy supply option. Most policies to date, which I term incremental, attempt to encourage energy efficiency and renewables

  5. In Situ Resource Utilization Technology Research and Facilities Supporting the NASA's Human Systems Research and Technology Life Support Program

    Science.gov (United States)

    Schlagheck, Ronald A.; Sibille, Laurent; Sacksteder, Kurt; Owens, Chuck

    2005-01-01

    The NASA Microgravity Science program has transitioned research required in support of NASA s Vision for Space Exploration. Research disciplines including the Materials Science, Fluid Physics and Combustion Science are now being applied toward projects with application in the planetary utilization and transformation of space resources. The scientific and engineering competencies and infrastructure in these traditional fields developed at multiple NASA Centers and by external research partners provide essential capabilities to support the agency s new exploration thrusts including In-Situ Resource Utilization (ISRU). Among the technologies essential to human space exploration, the production of life support consumables, especially oxygen and; radiation shielding; and the harvesting of potentially available water are realistically achieved for long-duration crewed missions only through the use of ISRU. Ongoing research in the physical sciences have produced a body of knowledge relevant to the extraction of oxygen from lunar and planetary regolith and associated reduction of metals and silicon for use meeting manufacturing and repair requirements. Activities being conducted and facilities used in support of various ISRU projects at the Glenn Research Center and Marshall Space Flight Center will be described. The presentation will inform the community of these new research capabilities, opportunities, and challenges to utilize their materials, fluids and combustion science expertise and capabilities to support the vision for space exploration.

  6. In Situ Resource Utilization Technology Research and Facilities Supporting the NASA's Human Systems Research and Technology Life Support Program

    Science.gov (United States)

    Schlagheck, Ronald A.; Sibille, Laurent; Sacksteder, Kurt; Owens, Chuck

    2005-01-01

    The NASA Microgravity Science program has transitioned research required in support of NASA s Vision for Space Exploration. Research disciplines including the Materials Science, Fluid Physics and Combustion Science are now being applied toward projects with application in the planetary utilization and transformation of space resources. The scientific and engineering competencies and infrastructure in these traditional fields developed at multiple NASA Centers and by external research partners provide essential capabilities to support the agency s new exploration thrusts including In-Situ Resource Utilization (ISRU). Among the technologies essential to human space exploration, the production of life support consumables, especially oxygen and; radiation shielding; and the harvesting of potentially available water are realistically achieved for long-duration crewed missions only through the use of ISRU. Ongoing research in the physical sciences have produced a body of knowledge relevant to the extraction of oxygen from lunar and planetary regolith and associated reduction of metals and silicon for use meeting manufacturing and repair requirements. Activities being conducted and facilities used in support of various ISRU projects at the Glenn Research Center and Marshall Space Flight Center will be described. The presentation will inform the community of these new research capabilities, opportunities, and challenges to utilize their materials, fluids and combustion science expertise and capabilities to support the vision for space exploration.

  7. JV Task 126 - Mercury Control Technologies for Electric Utilities Burning Bituminous Coal

    Energy Technology Data Exchange (ETDEWEB)

    Jason Laumb; John Kay; Michael Jones; Brandon Pavlish; Nicholas Lentz; Donald McCollor; Kevin Galbreath

    2009-03-29

    The EERC developed an applied research consortium project to test cost-effective mercury (Hg) control technologies for utilities burning bituminous coals. The project goal was to test innovative Hg control technologies that have the potential to reduce Hg emissions from bituminous coal-fired power plants by {ge}90% at costs of one-half to three-quarters of current estimates for activated carbon injection (ACI). Hg control technology evaluations were performed using the EERC's combustion test facility (CTF). The CTF was fired on pulverized bituminous coals at 550,000 Btu/hr (580 MJ/hr). The CTF was configured with the following air pollution control devices (APCDs): selective catalytic reduction (SCR) unit, electrostatic precipitator (ESP), and wet flue gas desulfurization system (WFDS). The Hg control technologies investigated as part of this project included ACI (three Norit Americas, Inc., and eleven Envergex sorbents), elemental mercury (Hg{sup 0}) oxidation catalysts (i.e., the noble metals in Hitachi Zosen, Cormetech, and Hitachi SCR catalysts), sorbent enhancement additives (SEAs) (a proprietary EERC additive, trona, and limestone), and blending with a Powder River Basin (PRB) subbituminous coal. These Hg control technologies were evaluated separately, and many were also tested in combination.

  8. Analysis of Characteristics Extension Workers to Utilization of Information and Communication Technology

    Directory of Open Access Journals (Sweden)

    Veronice Veronice

    2015-08-01

    Full Text Available The science and technology is developing rapidly with the demands of changing times. The development of information and communication technology, especially since the advent of internet technology has led to major changes in society. Information technology products are relatively cheap and affordable facilitate access to information beyond the national borders and cultural boundaries. This condition has penetrated to all levels of human life, including farmers in the villages. Therefore, the extension becomes important role as a facilitator in developing the potential of farmers. Consequently extension is required to adjust to the changes and demands of the growing community. The objectives of the research is the analysis of characteristics extension workers to utilization of information and communication technology in Limapuluh Kota regency West Sumatera. This study is a descriptive-correlational survey-based study with the sample consisting of government employee as well as freelance extension workers in 8 Extension Agency of Agriculture  Fisheries and Forestry Extension (BP3K in Limapuluh Kota regency, West Sumatera province. Based on the results obtained, the results of different test (t-test is known that there are significant differences between the characteristics of the civil servants and THL-TBPP especially in the aspect of age and length of employment.

  9. Advancing Partner Notification Through Electronic Communication Technology: A Review of Acceptability and Utilization Research.

    Science.gov (United States)

    Pellowski, Jennifer; Mathews, Catherine; Kalichman, Moira O; Dewing, Sarah; Lurie, Mark N; Kalichman, Seth C

    2016-06-01

    A cornerstone of sexually transmitted infection (STI) prevention is the identification, tracing, and notification of sex partners of index patients. Although partner notification reduces disease burden and prevents new infections as well as reinfections, studies show that only a limited number of partners are ever notified. Electronic communication technologies, namely, the Internet, text messaging, and phone calls (i.e., e-notification), have the potential to expand partner services. We conducted a systematic review of studies that have investigated the acceptability and utility of e-notification. We identified 23 studies that met the following criteria: (a) 9 studies presented data on the acceptability of technology-based communications for contacting sex partner(s), and (b) 14 studies reported on the utilization of communication technologies for partner notification. Studies found high levels of interest in and acceptability of e-notification; however, there was little evidence for actual use of e-notification. Taken together, results suggest that electronic communications could have their greatest impact in notifying less committed partners who would otherwise be uninformed of their STI exposure. In addition, all studies to date have been conducted in resource-rich countries, although the low cost of e-notification may have its greatest impact in resource-constrained settings. Research is needed to determine the best practices for exploiting the opportunities afforded by electronic communications for expanding STI partner services.

  10. Minimal support technology and in situ resource utilization for risk management of planetary spaceflight missions

    Science.gov (United States)

    Murphy, K. L.; Rygalov, V. Ye.; Johnson, S. B.

    2009-04-01

    All artificial systems and components in space degrade at higher rates than on Earth, depending in part on environmental conditions, design approach, assembly technologies, and the materials used. This degradation involves not only the hardware and software systems but the humans that interact with those systems. All technological functions and systems can be expressed through functional dependence: [Function]˜[ERU]∗[RUIS]∗[ISR]/[DR];where [ERU]efficiency (rate) of environmental resource utilization[RUIS]resource utilization infrastructure[ISR]in situ resources[DR]degradation rateThe limited resources of spaceflight and open space for autonomous missions require a high reliability (maximum possible, approaching 100%) for system functioning and operation, and must minimize the rate of any system degradation. To date, only a continuous human presence with a system in the spaceflight environment can absolutely mitigate those degradations. This mitigation is based on environmental amelioration for both the technology systems, as repair of data and spare parts, and the humans, as exercise and psychological support. Such maintenance now requires huge infrastructures, including research and development complexes and management agencies, which currently cannot move beyond the Earth. When considering what is required to move manned spaceflight from near Earth stations to remote locations such as Mars, what are the minimal technologies and infrastructures necessary for autonomous restoration of a degrading system in space? In all of the known system factors of a mission to Mars that reduce the mass load, increase the reliability, and reduce the mission’s overall risk, the current common denominator is the use of undeveloped or untested technologies. None of the technologies required to significantly reduce the risk for critical systems are currently available at acceptable readiness levels. Long term interplanetary missions require that space programs produce a craft

  11. 19 CFR 10.606 - Filing of claim for tariff preference level.

    Science.gov (United States)

    2010-04-01

    ...-Central America-United States Free Trade Agreement Tariff Preference Level § 10.606 Filing of claim for... nevertheless be entitled to preferential tariff treatment under the CAFTA-DR under an applicable...

  12. Exploring the experience of clients with tetraplegia utilizing assistive technology for computer access.

    Science.gov (United States)

    Folan, Alyce; Barclay, Linda; Cooper, Cathy; Robinson, Merren

    2015-01-01

    Assistive technology for computer access can be used to facilitate people with a spinal cord injury to utilize mainstream computer applications, thereby enabling participation in a variety of meaningful occupations. The aim of this study was to gain an understanding of the experiences of clients with tetraplegia trialing assistive technologies for computer access during different stages in a public rehabilitation service. In order to explore the experiences of clients with tetraplegia trialing assistive technologies for computer use, qualitative methodology was selected. Data were collected from seven participants using semi-structured interviews, which were audio-taped, transcribed and analyzed thematically. Three main themes were identified. These were: getting back into life, assisting in adjusting to injury and learning new skills. The findings from this study demonstrated that people with tetraplegia can be assisted to return to previous life roles or engage in new roles, through developing skills in the use of assistive technology for computer access. Being able to use computers for meaningful activities contributed to the participants gaining an enhanced sense of self-efficacy, and thereby quality of life. Implications for Rehabilitation Findings from this pilot study indicate that people with tetraplegia can be assisted to return to previous life roles, and develop new roles that have meaning to them through the use of assistive technologies for computer use. Being able to use the internet to socialize, and complete daily tasks, contributed to the participants gaining a sense of control over their lives. Early introduction to assistive technology is important to ensure sufficient time for newly injured people to feel comfortable enough with the assistive technology to use the computers productively by the time of discharge. Further research into this important and expanding area is indicated.

  13. Tariffs and Firm-Level Heterogeneous Fixed Export Costs

    DEFF Research Database (Denmark)

    Jørgensen, Jan G.; Schröder, Philipp J.H.

    2005-01-01

    Recent literature on the workhorse model of intra-industry trade has explored heterogeneous cost structures at the firm level. These approaches have proven to add realism and predictive power. This note shows, however, that this added realism also implies that there may exist a positive bilateral...... tariff that maximizes national and world welfare. Applying one of the simplest specifications possible, namely a symmetric two-country intra-industry trade model with fixed export costs that are heterogeneous across firms, we find that the reciprocal reduction of small tariffs reduces welfare....

  14. Electric Vehicle (EV) Charging Management with Dynamic Distribution System Tariff

    DEFF Research Database (Denmark)

    O'Connell, Niamh; Wu, Qiuwei; Østergaard, Jacob

    2011-01-01

    congestions in local distribution systems from the day-ahead planning perspective. Locational marginal pricing method was used to determine the dynamic distribution system tariff based on predicted day-ahead spot prices and predicted charging behaviors. Distribution grids of the Bornholm power system were......An electric vehicle (EV) charging schedule algorithm was proposed in this paper in order to charge EVs to meet EV users’ driving needs with the minimum EV charging cost and respect the local distribution system constraints. A day-ahead dynamic distribution system tariff scheme was proposed to avoid...

  15. [Utilizing modern technology to promote spread and development of acu-moxibustion learning].

    Science.gov (United States)

    Zhang, Li-Jian; Li, Su-Yun; Ran, Sheng-Qi; Xu, Wen-Bin; Xu, Qing-Yan

    2008-06-01

    Nowadays, modern information technology (IT) has been gained great development. How to use the advanced IT to protect, spread and develop Chinese traditional culture of acupuncture is an important topic at the moment. Based on expounding characteristics of modern IT, the present article analyzed its advantages in digitalizing, exhibiting and sharing the rich resources of acu-moxibustion. Particularly, through introduction of concrete examples of "Digital Museum (Gallery) of Acu-moxibustion", this paper may provide a useful enlightenment for digitalizing construction of acu-moxibustion resources and promoting the further spread and development of acu-moxibustion learning by utilizing modern IT.

  16. Utilization of UV Curing Technology to Significantly Reduce the Manufacturing Cost of LIB Electrodes

    Energy Technology Data Exchange (ETDEWEB)

    Voelker, Gary [Miltec UV International, LLC, Stevensville, MD (United States); Arnold, John [Miltec UV International, LLC, Stevensville, MD (United States)

    2015-11-30

    Previously identified novel binders and associated UV curing technology have been shown to reduce the time required to apply and finish electrode coatings from tens of minutes to less than one second. This revolutionary approach can result in dramatic increases in process speeds, significantly reduced capital (a factor of 10 to 20) and operating costs, reduced energy requirements, and reduced environmental concerns and costs due to the virtual elimination of harmful volatile organic solvents and associated solvent dryers and recovery systems. The accumulated advantages of higher speed, lower capital and operating costs, reduced footprint, lack of VOC recovery, and reduced energy cost is a reduction of 90% in the manufacturing cost of cathodes. When commercialized, the resulting cost reduction in Lithium batteries will allow storage device manufacturers to expand their sales in the market and thereby accrue the energy savings of broader utilization of HEVs, PHEVs and EVs in the U.S., and a broad technology export market is also envisioned.

  17. Use of new technology to improve utilization and adherence to immunotherapy.

    Science.gov (United States)

    Joshi, Smita; Dimov, Ves

    2014-01-01

    Technology and social media have dramatically altered the landscape in which we practice medicine. Clinicians have increasingly turned to technology and the internet to enhance patient care. Allergists have used these modalities to improve utilization and adherence to immunotherapy. Electronic medical records (EMRs) are being widely adopted by allergy practices and some offer allergy/immunology specific modules that aid in daily workflow. The development of specialized devices that reduce pain associated with immunotherapy administration may improve compliance with immunotherapy. Social media and other forms of electronic communication such as e-mail, Facebook, Twitter, short message service (SMS), and YouTube give clinicians multiple avenues to disseminate information and reach their patients, possibly improving patient adherence to therapy. Finally, tablet computers, online networks, and electronic surveys provide additional ways to connect patients and physicians.

  18. Retaining and assisting nontraditional nursing students in a baccalaureate nursing program utilizing Blackboard & Tegrity technologies.

    Science.gov (United States)

    Merrill, Earlene B; Reinckens, Tina; Yarborough, Mildred; Robinson, Vaple I

    2006-01-01

    Historically Black College and University (HBCU) implemented new teaching methodologies that incorporate both technology and face-to-face teaching as a means of assisting and retaining the non-traditional student. Teaching strategies were enhanced through a new instructional delivery method, Tegrity. The course, Introduction to Nursing Process I, was transformed to a hybrid on-line course using Blackboard and Tegrity. Its transformation reflected inherent strengths when faculty used a systematic approach and implemented a strong team effort. A team approach including collaboration on lecture content and shared PowerPoint presentations in all sections of the course facilitated consistency in the course content. A conceptual model, which included a systems approach that encourages student involvement, was actualized throughout the project. This article utilizes a descriptive approach and explains what faculty did to retain and assist the 157 newly admitted non-traditional baccalaureate nursing students using two technological methods.

  19. Testing and Results of Human Metabolic Simulation Utilizing Ultrasonic Nebulizer Technology for Water Vapor Generation

    Science.gov (United States)

    Stubbe, Matthew; Curley, Su

    2010-01-01

    Life support technology must be evaluated thoroughly before ever being implemented into a functioning design. A major concern during that evaluation is safety. The ability to mimic human metabolic loads allows test engineers to evaluate the effectiveness of new technologies without risking injury to any actual humans. The main function of most life support technologies is the removal of carbon dioxide (CO2) and water (H2O) vapor. As such any good human metabolic simulator (HMS) will mimic the human body s ability to produce these items. Introducing CO2 into a test chamber is a very straightforward process with few unknowns so the focus of this particular new HMS design was on the much more complicated process of introducing known quantities of H2O vapor on command. Past iterations of the HMS have utilized steam which is very hard to keep in vapor phase while transporting and injecting into a test chamber. Also steam adds large quantities of heat to any test chamber, well beyond what an actual human does. For the new HMS an alternative approach to water vapor generation was designed utilizing ultrasonic nebulizers as a method for creating water vapor. Ultrasonic technology allows water to be vibrated into extremely tiny pieces (2-5 microns) and evaporate without requiring additional heating. Doing this process inside the test chamber itself allows H2O vapor generation without the unwanted heat and the challenging process of transporting water vapor. This paper presents the design details as well as results of all initial and final acceptance system testing. Testing of the system was performed at a range of known human metabolic rates in both sea-level and reduced pressure environments. This multitude of test points fully defines the systems capabilities as they relate to actual environmental systems testing.

  20. From Lunar Regolith to Fabricated Parts: Technology Developments and the Utilization of Moon Dirt

    Science.gov (United States)

    McLemore, C. A.; Fikes, J. C.; McCarley, K. S.; Good, J. E.; Gilley, S. D.; Kennedy, J. P.

    2008-01-01

    The U.S. Space Exploration Policy has as a cornerstone the establishment of an outpost on the moon. This lunar outpost wil1 eventually provide the necessary planning, technology development, testbed, and training for manned missions in the future beyond the Moon. As part of the overall activity, the National Aeronautics and Space Administration (NASA) is investigating how the in situ resources can be utilized to improve mission success by reducing up-mass, improving safety, reducing risk, and bringing down costs for the overall mission. Marshall Space Flight Center (MSFC), along with other NASA centers, is supporting this endeavor by exploring how lunar regolith can be mined for uses such as construction, life support, propulsion, power, and fabrication. An infrastructure capable of fabrication and nondestructive evaluation will be needed to support habitat structure development and maintenance, tools and mechanical parts fabrication, as well as repair and replacement of space-mission hardware such as life-support items, vehicle components, and crew systems, This infrastructure will utilize the technologies being developed under the In Situ Fabrication and Repair (ISFR) element, which is working in conjunction with the technologies being developed under the In Situ Resources Utilization (ISRU) element, to live off the land. The ISFR Element supports the Space Exploration Initiative by reducing downtime due to failed components; decreasing risk to crew by recovering quickly from degraded operation of equipment; improving system functionality with advanced geometry capabilities; and enhancing mission safety by reducing assembly part counts of original designs where possible. This paper addresses the need and plan for understanding the properties of the lunar regolith to determine the applicability of using this material in a fabrication process. This effort includes the development of high fidelity simulants that will be used in fabrication processes on the ground to

  1. 18 CFR 341.1 - Electronic filing of tariffs and related materials.

    Science.gov (United States)

    2010-04-01

    ... Electronic filing of tariffs and related materials. (a) General rule. Filings of tariff publications and... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Electronic filing of tariffs and related materials. 341.1 Section 341.1 Conservation of Power and Water Resources...

  2. 18 CFR 154.4 - Electronic filing of tariffs and related materials.

    Science.gov (United States)

    2010-04-01

    ... TARIFFS General Provisions and Conditions § 154.4 Electronic filing of tariffs and related materials. (a... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Electronic filing of tariffs and related materials. 154.4 Section 154.4 Conservation of Power and Water Resources...

  3. 18 CFR 154.208 - Service of tariff filings on customers and other parties.

    Science.gov (United States)

    2010-04-01

    ... SCHEDULES AND TARIFFS Procedures for Changing Tariffs § 154.208 Service of tariff filings on customers and... customers and state regulatory commissions that have made a standing request for such service. (c) Within... section, service upon the designated recipient will be deemed service upon the customer or other party. (e...

  4. 19 CFR 132.15 - Export certificate for beef subject to tariff-rate quota.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Export certificate for beef subject to tariff-rate... SECURITY; DEPARTMENT OF THE TREASURY QUOTAS Administration of Quotas § 132.15 Export certificate for beef subject to tariff-rate quota. (a) Requirement. In order to claim the in-quota tariff rate of duty on...

  5. What Is the Impact After the Change of Copper Custom Tariff

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>The Commission of Customs Tariff of the State Council issued"The notice from the Commis- sion of Customs Tariff of the State Council of the proposals on the implementation of customs tariff in 2008"numbered 25(2007)of the Commission,which was approved by the State Council and will take effort from Jan 1,2008.

  6. 22 CFR 91.3 - Assistance to Customs and Tariff Commission representatives.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Assistance to Customs and Tariff Commission... CONTROLS § 91.3 Assistance to Customs and Tariff Commission representatives. Consular officers shall render all proper assistance to Customs and Tariff Commission representatives abroad to aid them in...

  7. 19 CFR 10.763 - Filing of claim for preferential tariff treatment upon importation.

    Science.gov (United States)

    2010-04-01

    ... RATE, ETC. United States-Morocco Free Trade Agreement Import Requirements § 10.763 Filing of claim for preferential tariff treatment upon importation. An importer may make a claim for MFTA preferential tariff... 19 Customs Duties 1 2010-04-01 2010-04-01 false Filing of claim for preferential tariff...

  8. 19 CFR 10.607 - Goods eligible for tariff preference level claims.

    Science.gov (United States)

    2010-04-01

    ... Republic-Central America-United States Free Trade Agreement Tariff Preference Level § 10.607 Goods eligible... applicable conditions for preferential tariff treatment under the CAFTA-DR, other than the condition that they are originating goods. The preferential tariff treatment is limited to the quantities specified...

  9. 19 CFR 10.803 - Filing of claim for preferential tariff treatment upon importation.

    Science.gov (United States)

    2010-04-01

    ... RATE, ETC. United States-Bahrain Free Trade Agreement Import Requirements § 10.803 Filing of claim for preferential tariff treatment upon importation. An importer may make a claim for BFTA preferential tariff... 19 Customs Duties 1 2010-04-01 2010-04-01 false Filing of claim for preferential tariff...

  10. 19 CFR 181.71 - Denial of preferential tariff treatment dependent on origin verification and determination.

    Science.gov (United States)

    2010-04-01

    ... FREE TRADE AGREEMENT Origin Verifications and Determinations § 181.71 Denial of preferential tariff... 19 Customs Duties 2 2010-04-01 2010-04-01 false Denial of preferential tariff treatment dependent...) of this part, Customs shall deny preferential tariff treatment on an imported good, or shall deny...

  11. 19 CFR 10.703 - Filing of claim for preferential tariff treatment.

    Science.gov (United States)

    2010-04-01

    ... States-Jordan Free Trade Agreement Import Requirements § 10.703 Filing of claim for preferential tariff treatment. An importer may make a claim for US-JFTA preferential tariff treatment by including on the entry... 19 Customs Duties 1 2010-04-01 2010-04-01 false Filing of claim for preferential tariff...

  12. 18 CFR 35.10 - Form and style of rate schedules, tariffs and service agreements.

    Science.gov (United States)

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Form and style of rate schedules, tariffs and service agreements. 35.10 Section 35.10 Conservation of Power and Water Resources... OF RATE SCHEDULES AND TARIFFS Application § 35.10 Form and style of rate schedules, tariffs...

  13. Fully Integrated, Miniature, High-Frequency Flow Probe Utilizing MEMS Leadless SOI Technology

    Science.gov (United States)

    Ned, Alex; Kurtz, Anthony; Shang, Tonghuo; Goodman, Scott; Giemette. Gera (d)

    2013-01-01

    This work focused on developing, fabricating, and fully calibrating a flowangle probe for aeronautics research by utilizing the latest microelectromechanical systems (MEMS), leadless silicon on insulator (SOI) sensor technology. While the concept of angle probes is not new, traditional devices had been relatively large due to fabrication constraints; often too large to resolve flow structures necessary for modern aeropropulsion measurements such as inlet flow distortions and vortices, secondary flows, etc. Mea surements of this kind demanded a new approach to probe design to achieve sizes on the order of 0.1 in. (.3 mm) diameter or smaller, and capable of meeting demanding requirements for accuracy and ruggedness. This approach invoked the use of stateof- the-art processing techniques to install SOI sensor chips directly onto the probe body, thus eliminating redundancy in sensor packaging and probe installation that have historically forced larger probe size. This also facilitated a better thermal match between the chip and its mount, improving stability and accuracy. Further, the leadless sensor technology with which the SOI sensing element is fabricated allows direct mounting and electrical interconnecting of the sensor to the probe body. This leadless technology allowed a rugged wire-out approach that is performed at the sensor length scale, thus achieving substantial sensor size reductions. The technology is inherently capable of high-frequency and high-accuracy performance in high temperatures and harsh environments.

  14. Propellantless Attitude Control of Solar Sail Technology Utilizing Reflective Control Devices

    Science.gov (United States)

    Munday, Jeremy

    2016-01-01

    Solar sails offer an opportunity for a CubeSatscale, propellant-free spacecraft technology that enables long-term and long-distance missions not possible with traditional methods. Solar sails operate using the transfer of linear momentum from photons of sunlight reflected from the surface of the sail. To propel the spacecraft, no mechanically moving parts, thrusters, or propellant are needed. However, attitude control, or orientation, is still performed using traditional methods involving reaction wheels and propellant ejection, which severely limit mission lifetime. For example, the current state of the art solutions employed by upcoming missions couple solar sails with a state of the art propellant ejection gas system. Here, the use of the gas thruster has limited the lifetime of the mission. To solve the limited mission lifetime problem, the Propellantless Attitude Control of Solar Sail Technology Utilizing Reflective Control Devices project team is working on propellantless attitude control using thin layers of material, an optical film, electrically switchable from transparent to reflective. The technology is based on a polymer-dispersed liquid crystal (PDLC), which allows this switch upon application of a voltage. This technology removes the need for propellant, which reduces weight and cost while improving performance and lifetime.

  15. Carbon footprint of forest and tree utilization technologies in life cycle approach

    Science.gov (United States)

    Polgár, András; Pécsinger, Judit

    2017-04-01

    In our research project a suitable method has been developed related the technological aspect of the environmental assessment of land use changes caused by climate change. We have prepared an eco-balance (environmental inventory) to the environmental effects classification in life-cycle approach in connection with the typical agricultural / forest and tree utilization technologies. The use of balances and environmental classification makes possible to compare land-use technologies and their environmental effects per common functional unit. In order to test our environmental analysis model, we carried out surveys in sample of forest stands. We set up an eco-balance of the working systems of intermediate cutting and final harvest in the stands of beech, oak, spruce, acacia, poplar and short rotation energy plantations (willow, poplar). We set up the life-cycle plan of the surveyed working systems by using the GaBi 6.0 Professional software and carried out midpoint and endpoint impact assessment. Out of the results, we applied the values of CML 2001 - Global Warming Potential (GWP 100 years) [kg CO2-Equiv.] and Eco-Indicator 99 - Human health, Climate Change [DALY]. On the basis of the values we set up a ranking of technology. By this, we received the environmental impact classification of the technologies based on carbon footprint. The working systems had the greatest impact on global warming (GWP 100 years) throughout their whole life cycle. This is explained by the amount of carbon dioxide releasing to the atmosphere resulting from the fuel of the technologies. Abiotic depletion (ADP foss) and marine aquatic ecotoxicity (MAETP) emerged also as significant impact categories. These impact categories can be explained by the share of input of fuel and lube. On the basis of the most significant environmental impact category (carbon footprint), we perform the relative life cycle contribution and ranking of each technologies. The technological life cycle stages examined

  16. Status of combustion-modification technology for utility-boiler NO/sub x/ control

    Energy Technology Data Exchange (ETDEWEB)

    1978-12-01

    This report documents significant developments in the subject area of combustion modifications as applied to coal-fired utility boilers. The primary emphasis is on the status of NO/sub x/ control technology, but related topics, such as boiler corrosion and hazardous emissions during modified-combustion operation, are also discussed. This report is intended as a complement to the 1977 Assessment of NO/sub x/ Control Technology for Coal-Fired Utility Boilers (ANL/ECT-3, Appendix D). A synopsis of recent NO/sub x/ field-test programs undertaken by the U.S. Environmental Protection Agency (EPA) and the Electric Power Research Institute (EPRI) is presented along with a status report on the major boiler manufacturers' low-NO/sub x/ burner/boiler development efforts. Because of concerns that low-NO/sub x/ operating modes may increase boiler-tubewall corrosion and increase polycyclic-organic-matter (POM) and SO/sub 3/ emissions, discussions of recent test programs and analytical studies on these topics are also included.

  17. Digital Divide in the Utilization of Information and Communication Technology (ICT) in Counsellor Education in Nigerian Universities

    Science.gov (United States)

    Eyo, Mfon

    2014-01-01

    This study investigated digital divide in the utilization of Information and Communication Technology (ICT) in counsellor education in Nigerian universities. It had two research questions and two hypotheses tested at 0.05 level of significance. It adopted a survey design and used ICT Utilization Questionnaire (IUQ) in gathering data from the…

  18. Coordinated Tax-Tariff Reforms, Informality, and Welfare Distribution

    NARCIS (Netherlands)

    Ligthart, J.E.; van der Meijden, G.C.

    2010-01-01

    The paper studies the revenue, efficiency, and distributional implications of a simple strategy of offsetting tariff reductions with increases in destination-based consumption taxes so as to leave consumer prices unchanged. We employ a dynamic micro-founded macroeconomic model of a small open develo

  19. Feed-in Tariffs: Good Practices and Design Considerations

    Energy Technology Data Exchange (ETDEWEB)

    Cox, Sadie [National Renewable Energy Lab. (NREL), Golden, CO (United States); Esterly, Sean [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-01-02

    In recent years, feed-in tariff (FIT) activity has focused primarily on revisions to current policies, underscoring the need for stable and predictable, yet flexible, policy environments. This policy brief provides a primer on key FIT design elements, lessons from country experience, and support resources to enable more detailed and country-specific FIT policy design.

  20. Impact of Russian Log Export Tariffs on China

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Based on the introduction of the Sino-Russian timber trade and the history about timber export in Russia,the paper gives the reasons for the adjustment in Russian timber export and its influence on timber import in China.Finally countermeasures against Russian adjustment in timber export tariffs are proposed.

  1. 19 CFR 10.100 - Entry, examination, and tariff status.

    Science.gov (United States)

    2010-04-01

    ...; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. General Provisions United States Government Importations § 10.100 Entry, examination, and tariff status. Except as otherwise..., importations made by or for the account of any agency or office of the United States Government are subject...

  2. Real versus tariff liberalization: a welfare comparison under monopolistic competition

    DEFF Research Database (Denmark)

    Schröder, Philipp

    2004-01-01

    A distinction between real trade costs (e.g. administration, border formalities, transport costs) and tariff costs is introduced into a standard monopolistic competition trade model. Driven by the number of firms, welfare under real trade barriers turns out to be lower than under an equivalent ta...

  3. 47 CFR 69.3 - Filing of access service tariffs.

    Science.gov (United States)

    2010-10-01

    ... telephone companies involved in a merger or acquisition. (1) Notwithstanding the requirements of § 69.3(e)(9... resulting from the merger or acquisition of telephone properties are to be made effective on the next annual access tariff filing effective date following consummation of the merger or acquisition transaction,...

  4. A Study of Methods of Telecommunication Tariff Decision

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    An in-depth exploration has been made of telecommunication tariffand its decision support system. It is the first attempt to conduct such a study by the integrated use of econometrics, system emulation and system dynamics. A practically-demanded cost model of the telecommunication tariff decision is proposed. The system has been verified with real data.

  5. Technical Barriers, Licenses and Tariffs as Means of Limiting Market Access

    DEFF Research Database (Denmark)

    Schröder, Philipp J.H.; Jørgensen, Jan Guldager

    2006-01-01

    Technical barriers (standards), import licenses and tariffs may be deployed as means of limiting the market access of foreign firms. The present paper examines these measures in a setting of monopolistic competition. We find that, if protection focuses predominantly on the number of foreign firms...... accessing the domestic market, a technical barrier (an import license) may dominate a tariff (tariff and a tech- nical barrier) in terms of consumer welfare, even when tariff revenues are fully redistributed. However, if protection pays su±cient focus on limiting the total import volume, then tariffs...

  6. Research on Replacing Effects & Examination System of TBT against Tariff Impediment to Textile and Apparel Trade

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    With the cutoff and limitation of tariff and traditional non-tariff Barriers to Trade by GATT/WTO, Technical Barriers to Trade (TBT) has gradually replaced tariff and general non-tariff Barriers to Trade and become an important measurement in new trade protectionism. This article analyzes the replacement of TBT on tariff barrier for exporting countries, as well as the trading pattern of TBT in its maturing period through the discussion of macro strategies of surpassing TBT; meanwhile it also probes into the examination and supervision policies of governmental functional departments.

  7. A Survey of Utility Experience with Real Time Pricing

    Energy Technology Data Exchange (ETDEWEB)

    Barbose, Galen; Goldman, Charles; Neenan, Bernie

    2004-12-01

    While more than 70 utilities in the U.S. have offered voluntary RTP tariffs on either a pilot or permanent basis, most have operated in relative obscurity. To bring this broad base of experience to bear on policymakers current efforts to stimulate price responsive demand, we conducted a survey of 43 voluntary RTP tariffs offered in 2003. The survey involved telephone interviews with RTP program managers and other utility staff, as well as a review of regulatory documents, tariff sheets, program evaluations, and other publicly available sources. Based on this review of RTP program experience, we identify key trends related to: utilities motivations for implementing RTP, evolution of RTP tariff design, program participation, participant price response, and program outlook. We draw from these findings to discuss implications for policymakers that are currently considering voluntary RTP as a strategy for developing price responsive demand.

  8. Utilization of Information and Communication Technology (ICT) Resources and Job Effectiveness among Library Staff in the University of Calabar and Cross River University of Technology, Nigeria

    Science.gov (United States)

    Ntui, Aniebiet Inyang; Inyang, Comfort Linus

    2015-01-01

    This study investigated utilization of Information and Communication Technology (ICT) resources and job effectiveness among library staff in the University of Calabar and Cross River University of Technology, Nigeria. To achieve the purpose of this study, four hypotheses were formulated to guide the study. Ex-post facto research design was adopted…

  9. Rule-based Energy Management System in an Experimental Microgrid with the Presence of Time of Use Tariffs

    Directory of Open Access Journals (Sweden)

    Moghimi Mojtaba

    2016-01-01

    Full Text Available This paper aims to investigate a method of peak load shaving through the utilization of solar PV and battery energy storage whilst creating a cost effective Energy Management System (EMS. This is achieved by utilizing a rule-sets to manage and optimize a scheduling system with a forecasting algorithm. As Time of Use (ToU tariffs change throughout the day, a cost benefit can be achieved when a smart energy storage system is appropriately employed. The EMS operation is tested on an experimental microgrid with commercial load considering payback period calculation.

  10. Perception of medical students for utility of mobile technology use in medical education

    Directory of Open Access Journals (Sweden)

    Sushama Subhash Thakre

    2015-01-01

    Full Text Available Introduction: Mobile technology is changing the way we live, and it is beginning to change the way we learn. Current literature reviews have shown that research on mobile technology in medical education primarily focused on efficacy, of mobile devices as an educational tool and resource, infrastructure to support m-learning, benefits, challenges, and appropriate use. Objectives: To assess the perception of medical student for the utility of mobile technology in their learning experience and to find out different barriers in the application of mobile phone in medical education. Materials and Methods: The study was designed as a descriptive study to assess emerging patterns of mobile technology use by medical students across the academic year 2013-2014. Interview and focus group discussion was a method of data collection. Results: Mean age ± standard deviation of the current mobile was 3.45 ± 1.45 years. Mobile users were 302 (96.79% and Smartphone users were 261 (83.61%. In the present study, 176 (56.41% used for the academic purpose and 65 (20.83% of the students preferred the same for an entertainment purpose. Gender-wise significant difference was observed in regards to Smartphone availability and daily Internet use for education purpose by female was more than male. Conclusion: The lessons learned from this study are-majority of the students use Smartphone mainly for communication, learning, and entertainment purpose. With increasing use of portable devices by students, it is logical to expect the next step to incorporate these devices in the learning environment and should, therefore, be appropriately considered for curriculum.

  11. Colombian capital goods industry and technological development.

    OpenAIRE

    Zuleta LA; Londono JL; Uribe JD

    1982-01-01

    ILO pub-WEP pub. Working paper, capital goods, technology, industrial development, trends, 1955-1978, Colombia - supply and demand, choice of product, Innovation, technology transfer, obstacles, tariff policy, research policy. Bibliography, diagram, statistical tables.

  12. Utilization of information technology in eastern North Carolina physician practices: determining the existence of a digital divide.

    Science.gov (United States)

    Rosenthal, David A; Layman, Elizabeth J

    2008-02-13

    The United States Department of Health and Human Services (DHHS) has emphasized the importance of utilizing health information technologies, thus making the availability of electronic resources critical for physicians across the country. However, few empirical assessments exist regarding the current status of computerization and utilization of electronic resources in physician offices and physicians' perceptions of the advantages and disadvantages of computerization. Through a survey of physicians' utilization and perceptions of health information technology, this study found that a "digital divide" existed for eastern North Carolina physicians in smaller physician practices. The physicians in smaller practices were less likely to utilize or be interested in utilizing electronic health records, word processing applications, and the Internet.

  13. Modeling and Analysis Compute Environments, Utilizing Virtualization Technology in the Climate and Earth Systems Science domain

    Science.gov (United States)

    Michaelis, A.; Nemani, R. R.; Wang, W.; Votava, P.; Hashimoto, H.

    2010-12-01

    Given the increasing complexity of climate modeling and analysis tools, it is often difficult and expensive to build or recreate an exact replica of the software compute environment used in past experiments. With the recent development of new technologies for hardware virtualization, an opportunity exists to create full modeling, analysis and compute environments that are “archiveable”, transferable and may be easily shared amongst a scientific community or presented to a bureaucratic body if the need arises. By encapsulating and entire modeling and analysis environment in a virtual machine image, others may quickly gain access to the fully built system used in past experiments, potentially easing the task and reducing the costs of reproducing and verify past results produced by other researchers. Moreover, these virtual machine images may be used as a pedagogical tool for others that are interested in performing an academic exercise but don't yet possess the broad expertise required. We built two virtual machine images, one with the Community Earth System Model (CESM) and one with Weather Research Forecast Model (WRF), then ran several small experiments to assess the feasibility, performance overheads costs, reusability, and transferability. We present a list of the pros and cons as well as lessoned learned from utilizing virtualization technology in the climate and earth systems modeling domain.

  14. Utilization of Virtual Reality Content in Grade 6 Social Studies Using Affordable Virtual Reality Technology

    Directory of Open Access Journals (Sweden)

    Lee Steven O. Zantua

    2017-05-01

    Full Text Available Virtual Reality is fast becoming a breakthrough in education technology and is headed towards a path where learning has become immersive. Virtual reality (VR offers both learners and educators a great opportunity to bridge gaps in the pedagogical sense. With the emergence of the Google Cardboard (GCB platform, a low-cost, virtual reality gadget comes a wide range of opportunities for educators and institutions to bring about an immersive type of learning environment for the 21st-century learner. Using Grade 6 Middle school students, this research explores the learning outcomes and student reactions using the GCB and Google Expeditions application. The study showed no significant difference in pre-test scores of the control and experimental group. There is however, a significant difference in the scores of the experimental group compared to the control group after post-test. Utilizing t-test in comparing the two groups, it was found that the mean of the post-test scores for Group A (experimental was significantly higher than Group B(control. The result of the independent samples t-test was significant, t(18 = 2.33, p = .032, suggesting that the mean of posttest score was significantly different between Groups A and B. This difference in score performance gives light to how VR can be used as a tool that enhances the learning experience. By using VR technology that is low cost and effective, more institutions will be able to help students learn better.

  15. Novel technology for sewage sludge utilization: preparation of amino acids chelated trace elements (AACTE) fertilizer.

    Science.gov (United States)

    Liu, Yangsheng; Kong, Sifang; Li, Yaqiong; Zeng, Hui

    2009-11-15

    This study developed a novel technology for sewage sludge utilization. The bacteria proteins in the sewage sludge were extracted to produce the amino acid chelated trace elements (AACTE) fertilizer by virtue of several chemical processes. Firstly, the sewage sludge was hydrolyzed under hot hydrochloric acid solution to obtain protein solution. The effects of hydrolysis temperature, reaction time and pH on the extraction ratio of protein from the sewage sludge were investigated. Secondly, the protein solution was further hydrolyzed into amino acids under hot acid condition. The effects of the HCl dosage, hydrolysis temperature and reaction time on the yields of amino acids were investigated in detail. Thirdly, the raw amino acids solution was purified by activated carbon decolorization and glacial acetic acid dissolution. Finally, the purified amino acids were used to produce the AACTE fertilizer by chelating with trace elements. Results showed that, under optimum hydrolysis conditions, 78.5% of protein was extracted from the sewage sludge and the amino acids yield was 10-13 g per 100g of dry sludge. The AACTE fertilizer produced was in accordance with China Standard for Amino Acids Foliar Fertilizer. This novel technology is more environmentally friendly compared with the conventional sludge treatments.

  16. Thermal Energy for Lunar In Situ Resource Utilization: Technical Challenges and Technology Opportunities

    Science.gov (United States)

    Gordon, Pierce E. C.; Colozza, Anthony J.; Hepp, Aloysius F.; Heller, Richard S.; Gustafson, Robert; Stern, Ted; Nakamura, Takashi

    2011-01-01

    Oxygen production from lunar raw materials is critical for sustaining a manned lunar base but is very power intensive. Solar concentrators are a well-developed technology for harnessing the Sun s energy to heat regolith to high temperatures (over 1375 K). The high temperature and potential material incompatibilities present numerous technical challenges. This study compares and contrasts different solar concentrator designs that have been developed, such as Cassegrains, offset parabolas, compound parabolic concentrators, and secondary concentrators. Differences between concentrators made from lenses and mirrors, and between rigid and flexible concentrators are also discussed. Possible substrate elements for a rigid mirror concentrator are selected and then compared, using the following (target) criteria: (low) coefficient of thermal expansion, (high) modulus of elasticity, and (low) density. Several potential lunar locations for solar concentrators are compared; environmental and processing-related challenges related to dust and optical surfaces are addressed. This brief technology survey examines various sources of thermal energy that can be utilized for materials processing on the lunar surface. These include heat from nuclear or electric sources and solar concentrators. Options for collecting and transporting thermal energy to processing reactors for each source are examined. Overall system requirements for each thermal source are compared and system limitations, such as maximum achievable temperature are discussed.

  17. A wireless recording system that utilizes Bluetooth technology to transmit neural activity in freely moving animals.

    Science.gov (United States)

    Hampson, Robert E; Collins, Vernell; Deadwyler, Sam A

    2009-09-15

    A new wireless transceiver is described for recording individual neuron firing from behaving rats utilizing Bluetooth transmission technology and a processor onboard for discrimination of neuronal waveforms and associated time stamps. This universal brain activity transmitter (UBAT) is attached to rodents via a backpack and amplifier headstage and can transmit 16 channels of captured neuronal firing data via a Bluetooth transceiver chip over very large and unconstrained distances. The onboard microprocessor of the UBAT allows flexible online control over waveform isolation criteria via transceiver instruction and the two-way communication capacity allows for closed-loop applications between neural events and behavioral or physiological processes which can be modified by transceiver instructions. A detailed description of the multiplexer processing of channel data as well as examples of neuronal recordings in different behavioral testing contexts is provided to demonstrate the capacity for robust transmission within almost any laboratory environment. A major advantage of the UBAT is the long transmission range and lack of object-based line of sight interference afforded by Bluetooth technology, allowing flexible recording capabilities within multiple experimental paradigms without interruption. Continuous recordings over very large distance separations from the monitor station are demonstrated providing experimenters with recording advantages not previously available with other telemetry devices.

  18. Impacts of Tariff and Non-tariff Trade Barriers on Global Forest Products Trade: An Application of the Global Forest Products Model

    NARCIS (Netherlands)

    Sun, L.; Bogdanski, B.; Stennes, B.; Kooten, van G.C.

    2010-01-01

    Although there has been considerable analysis on the effects of trade measures on forest product markets, these have tended to focus on tariffs. There is growing concern about the impact of non-tariff trade measures on the global forest product sector. The objective of this study is to fill a gap an

  19. Tariff system with the wrong incentives; Tariefsysteem met verkeerde prikkels

    Energy Technology Data Exchange (ETDEWEB)

    Aalbers, R.F.T.; Bressers, D.L.F.; Dijkgraaf, E.; Hoogendoorn, P.J.; De Klerk, S.C. [Research Centre for Economic Policy OCFEB, Rotterdam (Netherlands)

    1999-03-26

    In the first months of 1999 a bill to amend the Electricity Law 1998 is under discussion in the Dutch parliament. The amendment concerns the proposal for a new tariff structure for the transportation of electricity, the so-called cascade system. In a former issue of this magazine the advantages and disadvantages of the cascade system, compared to the so-called level playing field system, were discussed. However, a well-founded choice between the two systems can not be made without insight into the quantitative effects. In this report it is discussed to what extent the systems lead to different electricity transportation tariffs. In the cascade system costs are calculated for three types of consumers: high voltage, medium voltage and low voltage consumers. In a level playing field system the rule is that who causes the costs, pays the costs. 30 refs.

  20. No way around green tariffs; Oekotarife sind nicht mehr wegzudenken

    Energy Technology Data Exchange (ETDEWEB)

    Briese, Dirk [trend:research GmbH, Stuttgart (Germany)

    2011-05-15

    Just like green electricity, meanwhile a classic, so too now does newcomer ''green gas'' offer energy suppliers with an appropriate marketing mix far-reaching opportunities for improving their corporate image, securing customer loyalty and increasing turnover. However the only beneficiaries of this trend to date have been green-only suppliers which specialise in this market. Although most traditional suppliers have now added green tariffs to their product portfolio, this has given them little commercial success, since eco-minded consumers often consider green-only suppliers to be more credible. A recent study shows that the market volume of green electricity and green gas tariffs will grow markedly over the next five years. Energy suppliers should therefore turn their attention to the question of how they can best exploit this potential.

  1. Power Tariff Reform and Energy Constraint in China

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Power tariff reform and power restructuring should be coordinately advanced. In the period of the power tariff reform, attention should be fully given to possible demand growth, investment characteristics and environment pressure when taking transitional measures. In the stage, focal point of the reform is to establish a rational system of sales price to power network. Moreover, it is necessary to raise the electricity price for household consumption. The highly-centralized system of state-owned power enterprises is the root-cause of some basic problems in the power industry. The system would cause a great power overproduction, squeeze out private and foreign investment and constrain efficiency improvement. Effective energy strategy and planning are a crux of dealing with crises of energy security. China needs a state-class energy administration body and should make massive research on energy economics.

  2. Heat Pump Water Heater Technology: Experiences of Residential Consumers and Utilities

    Energy Technology Data Exchange (ETDEWEB)

    Ashdown, BG

    2004-08-04

    benefits. Because it produces hot water by extracting heat from the air it tends to dehumidify and cool the room in which it is placed. Moreover, it tends to spread the water heating load across utility non-peak periods. Thus, electric utilities with peak load issues could justify internal programs to promote this technology to residential and commercial customers. For practical purposes, consumers are indifferent to the manner in which water is heated but are very interested in product attributes such as initial first cost, operating cost, performance, serviceability, product size, and installation costs. Thus, the principal drivers for penetrating markets are demonstrating reliability, leveraging the dehumidification attributes of the HPWH, and creating programs that embrace life-cycle cost principles. To supplement this, a product warranty with scrupulous quality control should be implemented; first-price reduction through engineering, perhaps by reducing level of energy efficiency, should be pursued; and niche markets should be courted. The first step toward market penetration is to address the HPWH's performance reliability. Next, the manufacturers could engage select utilities to aggressively market the HPWH. A good approach would be to target distinct segments of the market with the potential for the highest benefits from the technology. Communications media that address performance issues should be developed. When marketing to new home builders, the HPWH could be introduced as part of an energy-efficient package offered as a standard feature by builders of new homes within a community. Conducting focus groups across the United States to gather input on HPWH consumer values will feed useful data back to the manufacturers. ''Renaming'' and ''repackaging'' the HPWH to improve consumer perception, appliance aesthetics, and name recognition should be considered. Once an increased sales volume is achieved, the manufacturers

  3. District Heating Systems Performance Analyses. Heat Energy Tariff

    Science.gov (United States)

    Ziemele, Jelena; Vigants, Girts; Vitolins, Valdis; Blumberga, Dagnija; Veidenbergs, Ivars

    2014-12-01

    The paper addresses an important element of the European energy sector: the evaluation of district heating (DH) system operations from the standpoint of increasing energy efficiency and increasing the use of renewable energy resources. This has been done by developing a new methodology for the evaluation of the heat tariff. The paper presents an algorithm of this methodology, which includes not only a data base and calculation equation systems, but also an integrated multi-criteria analysis module using MADM/MCDM (Multi-Attribute Decision Making / Multi-Criteria Decision Making) based on TOPSIS (Technique for Order Performance by Similarity to Ideal Solution). The results of the multi-criteria analysis are used to set the tariff benchmarks. The evaluation methodology has been tested for Latvian heat tariffs, and the obtained results show that only half of heating companies reach a benchmark value equal to 0.5 for the efficiency closeness to the ideal solution indicator. This means that the proposed evaluation methodology would not only allow companies to determine how they perform with regard to the proposed benchmark, but also to identify their need to restructure so that they may reach the level of a low-carbon business.

  4. Optimal decisions of countries with carbon tax and carbon tariff

    Directory of Open Access Journals (Sweden)

    Yumei Hou

    2015-05-01

    Full Text Available Purpose: Reducing carbon emission has been the core problem of controlling global warming and climate deterioration recently. This paper focuses on the optimal carbon taxation policy levied by countries and the impact on firms’ optimal production decisions. Design/methodology/approach: This paper uses a two-stage game theory model to analyze the impact of carbon tariff and tax. Numerical simulation is used to supplement the theoretical analysis. Findings: Results derived from the paper indicate that the demand in an unstable market is significantly affected by environmental damage level. Carbon tariff is a policy-oriented tax while the carbon tax is a market-oriented one. Comprehensive carbon taxation policy benefit developed countries and basic policy is more suitable for developing countries. Research limitations/implications: In this research, we do not consider random demand and asymmetric information, which may not well suited the reality. Originality/value: This work provides a different perspective in analyzing the impact of carbon tax and tariff. It is the first study to consider two consuming market and the strategic game between two countries. Different international status of countries considered in the paper is also a unique point.

  5. Utilization of K-technology for waste processing. Nutzung der KS-Technologie fuer die Verarbeitung von Abfallstoffen

    Energy Technology Data Exchange (ETDEWEB)

    Nelskamp, H.

    1992-03-01

    In addition to continuous inprovements the product range and capacity adaptations to the state of the market, observations are made in sand-lime brick industry to apply existing technology for a further utilization. An interesting aspect is the utilization or further preparation of certain waste materials which cannot be reused at present due to their chemical-physical composition. These investigations show the possibilities as well as the disadvantages, which result from the processing of waste materials by means of KS-technology. These investigations are restricted to a few characteristic residues from power stations waste incineration and steel production. (orig./BBR). 27 figs., 26 tabs.

  6. Integration of modern remote sensing technologies for faster utility mapping and data extraction

    Science.gov (United States)

    Ristic, Aleksandar; Govedarica, Miro; Vrtunski, Milan; Petrovacki, Dusan

    2015-04-01

    Analysis of the application of modern remote sensing technologies in current research shows a significant increase in interest in fast and efficient detection of underground installations. The most important reasons of the said application are preventing damage during excavation works, as well as the formation of the cadastre of underground utilities suitable for operating and maintaining of such resources. Given the wide area of application in the detection of underground installations, ground penetrating radar scanning technology (GPR), in this instance, is used as prevalent method for the purpose of the acquisition radargram of pipelines and the comparison with the results of the acquisition of Unmanned Aerial Vehicle - UAV drone Aibot X6 equipped with Optris PI Lightweight Kit (which consists of a miniaturized lightweight PC and a weight-optimized PI450 Optris LW infrared camera). The aim of the research presented in the this paper is to analyze the benefits of integrating a mobile system capable of very fast, reliable and relatively inexpensive detection of heating pipelines using thermal imaging aerial inspection and GPR technology for control sampling of radargrams on specific locations of routes in order to achieve following: a simple identification of the characteristics of heating pipelines, prevention and registration of damage, as well as automated data extraction. The results of integrated application of the above-mentioned remote sensing technologies have shown that, within 10min of planned flight, it is possible to detect and georeference routes of heating pipelines in the area of 50.000m2 by application of thermal imaging inspection that assigns an adequate temperature value to each pixel in an image. The experiment showed that the registration is also possible in the case of pre-insulated and conventionally insulated heating pipes, and the difference in temperature measurements above the routes and the environment was up to 4 degrees. It should be

  7. Preparation of building technology for ''Internet of the energy''. Claim on price variable tariffs from 30th December, 2010; Gebaeudetechnik fuer ''Internet der Energie'' vorbereiten. Anspruch auf preisvariable Tarife ab 30. Dezember 2010

    Energy Technology Data Exchange (ETDEWEB)

    Brickmann, Ullrich [Siemens-Division Building Technologies, Frankfurt a. M. (Germany)

    2010-11-15

    Starting from 30 December 2010, power suppliers are obligated to offer time-variable or load-variable electricity rates to their end customers. Thus renewably produced electricity is to be used better. Furthermore, an additional incentive for an energy-saving operation of buildings is given. In the future, every building has to keep its maximum electricity supply as low as possible by means of an automation system, to react on time-variable and load-variable tariff offers, to store free low-priced energy offers and to store surplus decentralized produced electricity 'on demand' into the supply network.

  8. Tariff Impact on the Domestic Price of Vegetable Oil in Iran and the Associated Issues

    Directory of Open Access Journals (Sweden)

    omid gilanpour

    2015-05-01

    Full Text Available This study uses vector error correction model to examine the effects of oilseeds, crude oil and vegetable oil tariffs on vegetable oil consumer price. Monthly data sets for the years 2004-2013 and VAR and VECM models were applied for this study. Research findings indicates only a long term equilibrium relation between the study variables .The effect of vegetable oil tariffs on consumer and producer price index are 0.4 and 0.07, respectively. Furthermore, one percent increase in the oil seeds and crude oil tariff, will increase consumer prices by 2.35, 0.19percent. The huge gap between the impacts of the two tariffs –e.g. oilseeds and crude oil tariffs- on consumer price shows that oil industries work with low efficiency. This practically doubles the impact of tariff on consumers. Accordingly, structural reform in the oil industry can develop oil production and prevent additional burden upon the consumer price.

  9. Effects of cost reflective electricity tariffs in Namibia

    Energy Technology Data Exchange (ETDEWEB)

    2007-04-15

    The power balance in Southern Africa is changing. Namibia faces the choice between increased reliance on imports of electricity or expanding domestic generation. One option is to build a gas fired power plant at Kudu. This plant will have an average generation cost well above the projected import cost. The changing power balance in the region may warrant that Namibia incurs substantial costs to ensure energy security. If Kudu is not built, we project that real end user tariffs will peak in 2010/11 at a level 22 percent higher than in 2006, but then gradually revert towards the 2006 level. The effects of this tariff scenario on the economy should not be dramatic, and we would not recommend to subsidise electricity in this case. This forecast is based on an assumed 67 percent increase the real price of imports. In this and all other scenarios we assume that the unit costs of distribution in Namibia and local surcharges will decline. Namibia has experienced temporary halts in imports of electricity. As the balance in the Southern African power market is changing, the risks of capacity shortages appear to have increased. Frequent power outages could be very costly to the economy, and one may thus argue that Namibia should accept the higher costs of electricity to ensure stable supply. Building Kudu could be one, and possibly the only, viable option to reduce the risks of capacity shortages. The cost of generation at Kudu, if it is built, is uncertain. We have assumed a cost at 44 c/kWh. This can be viewed as an upper bound of the cost range. If Kudu is built at this cost, the end user tariff would have to increase by 85 per cent in real terms over the 2006-2011 period to finance Kudu in full, having factored in projected exports earnings. The real tariff will decline slowly after 2011. This appears a risky scenario, not least for the effects on investments in exports sectors and businesses facing international competition in the Namibian market. If Kudu is built at

  10. Analysis Level Of Utilization Information And Communication Technology With The Competency Level Of Extension Workers

    Directory of Open Access Journals (Sweden)

    Veronice Veronice

    2015-01-01

    Full Text Available Extension placed man as the subject of development and human capital to develop into independent and empowered (dignity in adapting to the environment, thus being able to improve the quality of life for themselves, their families and communities. It is therefore necessary professional competence standard extension clear and effective controls in carrying counseling profession domination supported by Information and Communication Technology (ICT. This research aimed to analyze the relationship between the level of competency with the level of ICT use by the extension workers. The study was designed as a descriptive survey research correlational ,which was observed by quantitative analysis approach that is supported by descriptive and inferential statistic analysis. The study was conducted in Bogor Regency,West Java Province. Based on this research can be concluded  level of ICT utilization in the range of aspects related resources are very real to the competence of extension on the capability of understanding the potential of the region, entrepreneurial ability and the ability of the system guides the network, while the variation of the material aspects of counseling and a variety of related information is very real with all levels of competence extension.

  11. Defining core issues in utilizing information technology to improve access: evaluation and research agenda.

    Science.gov (United States)

    Jackson, George L; Krein, Sarah L; Alverson, Dale C; Darkins, Adam W; Gunnar, William; Harada, Nancy D; Helfrich, Christian D; Houston, Thomas K; Klobucar, Thomas F; Nazi, Kim M; Poropatich, Ronald K; Ralston, James D; Bosworth, Hayden B

    2011-11-01

    The Department of Veterans Affairs (VA) has been at the vanguard of information technology (IT) and use of comprehensive electronic health records. Despite the widespread use of health IT in the VA, there are still a variety of key questions that need to be answered in order to maximize the utility of IT to improve patient access to quality services. This paper summarizes the potential of IT to enhance healthcare access, key gaps in current evidence linking IT and access, and methodologic challenges for related research. We also highlight four key issues to be addressed when implementing and evaluating the impact of IT interventions on improving access to quality care: 1) Understanding broader needs/perceptions of the Veteran population and their caregivers regarding use of IT to access healthcare services and related information. 2) Understanding individual provider/clinician needs/perceptions regarding use of IT for patient access to healthcare. 3) System/Organizational issues within the VA and other organizations related to the use of IT to improve access. 4) IT integration and information flow with non-VA entities. While the VA is used as an example, the issues are salient for healthcare systems that are beginning to take advantage of IT solutions.

  12. Toward Successful Implementation of Speech Recognition Technology: A Survey of SRT Utilization Issues in Healthcare Settings.

    Science.gov (United States)

    Clarke, Martina A; King, Joshua L; Kim, Min Soon

    2015-07-01

    To evaluate physician utilization of speech recognition technology (SRT) for medical documentation in two hospitals. A quantitative survey was used to collect data in the areas of practice, electronic equipment used for documentation, documentation created after providing care, and overall thoughts about and satisfaction with the SRT. The survey sample was from one rural and one urban facility in central Missouri. In addition, qualitative interviews were conducted with a chief medical officer and a physician champion regarding implementation issues, training, choice of SRT, and outcomes from their perspective. Seventy-one (60%) of the anticipated 125 surveys were returned. A total of 16 (23%) participants were practicing in internal medicine and 9 (13%) were practicing in family medicine. Fifty-six (79%) participants used a desktop and 14 (20%) used a laptop (2%) computer. SRT products from Nuance were the dominant SRT used by 59 participants (83%). Windows operating systems (Microsoft, Redmond, WA) was used by more than 58 (82%) of the survey respondents. With regard to user experience, 42 (59%) participants experienced spelling and grammatical errors, 15 (21%) encountered clinical inaccuracy, 9 (13%) experienced word substitution, and 4 (6%) experienced misleading medical information. This study shows critical issues of inconsistency, unreliability, and dissatisfaction in the functionality and usability of SRT. This merits further attention to improve the functionality and usability of SRT for better adoption within varying healthcare settings.

  13. Survey on utility technology of a tidal and ocean current energy

    Science.gov (United States)

    Hirose, Manabu; Kadoyu, Masataka; Tanaka, Hiroyoshi

    1987-06-01

    A study is made to show the current technological levels in Japan and other nations regarding the conversion of tidal current or ocean current energy to electric power and to determine the latent energy quantities and energy-related characteristics of tidal and ocean currents. In Japan, relatively large-scale experiments made so far mostly used one of the following three types of devices: Savonius-wheel type, Darrieus-wheel type, and cross-flow-wheel type. Field experiments of tidal energy conversion have been performed at the Naruto and Kurushima Straits. The energy in the Kuroshio current is estimated at about 170 billion kWh per year. Ocean current energy does not undergo large seasonal variations. The total energy in major straits and channels in the Inland Sea and other sea areas to the west is estimated at about 124 billion kWh per year. Tidal current energy shows large seasonal variations, but it is possible to predict the changes. A survey is made to determine energy-related characteristics of a tidal current at Chichino-seto, Kagoshima Prefecture. At Chichino-seto, the flow velocity ranges from 0 to 2.2m/s, with a latent tidal current energy of about 70 kW, of which about 20 kW can actually be utilized.

  14. Utilizing Radiofrequency Identification Technology to Improve Safety and Management of Blood Bank Supply Chains.

    Science.gov (United States)

    Coustasse, Alberto; Meadows, Pamela; Hall, Robert S; Hibner, Travis; Deslich, Stacie

    2015-11-01

    The importance of efficiency in the supply chain of perishable products, such as the blood products used in transfusion services, cannot be overstated. Many problems can occur, such as the outdating of products, inventory management issues, patient misidentification, and mistransfusion. The purpose of this article was to identify the benefits and barriers associated with radiofrequency identification (RFID) usage in improving the blood bank supply chain. The methodology for this study was a qualitative literature review following a systematic approach. The review was limited to sources published from 2000 to 2014 in the English language. Sixty-five sources were found, and 56 were used in this research study. According to the finding of the present study, there are numerous benefits and barriers to RFID utilization in blood bank supply chains. RFID technology offers several benefits with regard to blood bank product management, including decreased transfusion errors, reduction of product loss, and more efficient inventory management. Barriers to RFID implementation include the cost associated with system implementation and patient privacy issues. Implementation of an RFID system can be a significant investment. However, when observing the positive impact that such systems may have on transfusion safety and inventory management, the cost associated with RFID systems can easily be justified. RFID in blood bank inventory management is vital to ensuring efficient product inventory management and positive patient outcomes.

  15. A welfare ranking of multilateral reductions in real and tariff trade barriers when firms are heterogenous

    DEFF Research Database (Denmark)

    Schröder, Philipp; Sørensen, Allan

    Trade liberalization comes about through reductions in various types of trade costs. This paper introduces, apart from real variable (i.e. iceberg) and fixed export costs, two partially redistributed tariffs into a Melitz (2003) model. We present comparable results for welfare effects and changes...... to the most preferred mode of liberalization as the fraction of tariffs wasted moves from zero to unity. Apart from a situation with no tariff redistribution, reductions in iceberg trade costs are preferred to reductions in real fixed trade costs which again are preferred to cuts in unit tariffs....

  16. Reductions in real versus tariff barriers: the impact on industry concentration

    DEFF Research Database (Denmark)

    Jørgensen, Jan Guldager; Schröder, Philipp

    2003-01-01

    as a reduction of trade barriers) may exert opposing forces on industry concentration, depending on whether the barrier consists of real (frictional) or tariff costs. In particular, the Herfindahl index of industry concentration falls for a reduction in real costs, but rises for a reduction in tariff costs....... The reason is that real barriers burn up resources, such that industry profitability is reduced, reducing entry, and resulting in fewer firms and a correspondingly higher concentration. Under a tariff barrier, the redistributed tariff revenue stabilises industry profitability, resulting in more firms...

  17. Technical barriers, import licenses and tariffs as means of limiting market access

    DEFF Research Database (Denmark)

    Jørgensen, Jan G.; Schröder, Philipp

    2003-01-01

    to trade can dominate a tariff in terms of consumer welfare, even when tariff revenues are fully redistributed. This case occurs for high levels of protection. Furthermore, an import license with full redistribution of revenues dominates both the technical barrier and the tariff for all levels......Technical barriers (standards), import licenses and tariffs may be deployed as means of limiting the market entry of foreign firms. The present paper examines these measures in a setting of monopolistic competition. It is established that -- contrary to what one would expect -- a technical barrier...

  18. Technical barriers, import licenses and tariffs as means of limiting market access

    DEFF Research Database (Denmark)

    Jørgensen, Jan G.; Schröder, Philipp

    2003-01-01

    Technical barriers (standards), import licenses and tariffs may be deployed as means of limiting the market entry of foreign firms. The present paper examines these measures in a setting of monopolistic competition. It is established that -- contrary to what one would expect -- a technical barrier...... to trade can dominate a tariff in terms of consumer welfare, even when tariff revenues are fully redistributed. This case occurs for high levels of protection. Furthermore, an import license with full redistribution of revenues dominates both the technical barrier and the tariff for all levels...

  19. Day as a Pathologist: Utilization of Technology to Guide Students in Exploring Careers in Breast Cancer Pathology

    Science.gov (United States)

    Adler, Jacob J.; Judd, Mariah V.; Bringman, Lauren R.; Wells, Clark D.; Marrs, Kathleen A.

    2013-01-01

    We developed an interactive laboratory that allows students to identify and grade tissue samples from human breast biopsies, using techniques similar to those used by actual pathologists. This unique lab develops a practical and intellectual understanding of basic tissue structures that make up living systems, utilizing technology to bring…

  20. Day as a Pathologist: Utilization of Technology to Guide Students in Exploring Careers in Breast Cancer Pathology

    Science.gov (United States)

    Adler, Jacob J.; Judd, Mariah V.; Bringman, Lauren R.; Wells, Clark D.; Marrs, Kathleen A.

    2013-01-01

    We developed an interactive laboratory that allows students to identify and grade tissue samples from human breast biopsies, using techniques similar to those used by actual pathologists. This unique lab develops a practical and intellectual understanding of basic tissue structures that make up living systems, utilizing technology to bring…

  1. Helping Mathematics Teachers Develop Noticing Skills: Utilizing Smartphone Technology for One-on-One Teacher/Student Interviews

    Science.gov (United States)

    Chao, Theodore; Murray, Eileen; Star, Jon R.

    2016-01-01

    Teaching mathematics for understanding requires listening to each student's mathematical thinking, best elicited in a one-on-one interview. Interviews are difficult to enact in a teacher's busy schedule, however. In this study, the authors utilize smartphone technology to help mathematics teachers interview a student in a virtual one-on-one…

  2. Utilizing the potential of the affected population and prevalent mobile technology during disaster response : Propositions from a literature survey

    NARCIS (Netherlands)

    Gunawan, L.T.; Fitrianie, S.; Brinkman, W.P.; Neerincx, M.A.

    2012-01-01

    Despite the growing awareness of the untapped potential of the affected population in a disaster situation, their inclusion in a disaster management is extremely limited. This study aims to survey the literature to see whether utilizing the affected people and prevalent mobile technology can be used

  3. Principals' Personal Variables and Information and Communication Technology Utilization in Federal Capital Territory Senior Secondary Schools, Abuja, Nigeria

    Science.gov (United States)

    Ogunshola, Roseline Folashade; Adeniyi, Abiodun

    2017-01-01

    The study investigated principals' personal variables and information and communication technology utilization in Federal Capital Territory (FCT) senior secondary schools, Abuja, Nigeria. The study adopted the correlational research design. The study used a sample of 94 senior secondary schools (including public and private) in FCT. Stratified…

  4. Utilizing the potential of the affected population and prevalent mobile technology during disaster response : Propositions from a literature survey

    NARCIS (Netherlands)

    Gunawan, L.T.; Fitrianie, S.; Brinkman, W.P.; Neerincx, M.A.

    2012-01-01

    Despite the growing awareness of the untapped potential of the affected population in a disaster situation, their inclusion in a disaster management is extremely limited. This study aims to survey the literature to see whether utilizing the affected people and prevalent mobile technology can be used

  5. Utilizing the Potential of the Affected Population and Prevalent Mobile Technology during Disaster Response: Propositions for a Literature Survey

    NARCIS (Netherlands)

    Gunawan, L.T.; Fitrianie, S.; Brinkman, W.P.; Neerincx, M.A.

    2012-01-01

    Despite the growing awareness of the untapped potential of the affected population in a disaster situation, their inclusion in a disaster management is extremely limited. This study aims to survey the literature to see whether utilizing the affected people and prevalent mobile technology can be used

  6. Barcode Technology Acceptance and Utilization in Health Information Management Department at Academic Hospitals According to Technology Acceptance Model

    Science.gov (United States)

    Ehteshami, Asghar

    2017-01-01

    Nowdays, due to the increasing importance of quality care, organizations focuse on the improving provision, management and distribution of health. On one hand, incremental costs of the new technologies and on the other hand, increased knowledge of health care recipients and their expectations for high quality services have doubled the need to make changes in order to respond to resource constraints (financial, human, material). For this purpose, several technologies, such as barcode, have been used in hospitals to improve services and staff productivity; but various factors effect on the adoption of new technologies and despite good implementation of a technology and its benefits, sometimes personnel don’t accept and don’t use it. Methods: This is an applied descriptive cross-sectional study in which all the barcode users in health information management department of the three academic hospitals (Feiz, Al-Zahra, Ayatollah Kashani) affiliated to Isfahan University of Medical Sciences were surveyed by the barcode technology acceptance questionnaire, in six areas as following: barcode ease of learning, capabilities, perception of its usefulness and its ease of use, users attitudes towards its using, and users intention. Results: The finding showed that barcode technology total acceptance was relatively desirable (%76.9); the most compliance with TAM model was related to the user perceptions about the ease of use of barcode technology and the least compliance was related to the ease of learning barcode technology (respectively %83.7 and %71.5). Conclusion: Ease of learning and barcode capability effect of usefulness and perceived ease of barcode technology. Users perceptions effect their attitudes toward greater use of technology and their attitudes have an effect on their intention to use the technology and finally, their intention makes actual use of the technology (acceptance). Therefore, considering the six elements related to technology implementation can be

  7. Research on Estimates of Xi’an City Life Garbage Pay-As-You-Throw Based on Two-part Tariff method

    Science.gov (United States)

    Yaobo, Shi; Xinxin, Zhao; Fuli, Zheng

    2017-05-01

    Domestic waste whose pricing can’t be separated from the pricing of public economics category is quasi public goods. Based on Two-part Tariff method on urban public utilities, this paper designs the pricing model in order to match the charging method and estimates the standard of pay-as-you-throw using data of the past five years in Xi’an. Finally, this paper summarizes the main results and proposes corresponding policy recommendations.

  8. Communications technologies for demand side management, DSM, and European utility communications architecture, EurUCA

    Energy Technology Data Exchange (ETDEWEB)

    Uuspaeae, P. [VTT Energy, Espoo (Finland)

    1996-12-31

    The scope of this research is data communications for electric utilities. Demand Side Management (DSM) calls for communication between the Electric Utility and the Customer. The communication capacity needed will depend on the functions that are chosen for DSM, and on the number of customers. Some functions may be handled with one-way communications, some functions require two-way communication. Utility Communication Architecture looks for an overall view of the communications needs and communication systems in an electric utility. The objective is to define and specify suitable and compatible communications procedures within the Utility and also to outside parties. (27 refs.)

  9. Combining communication technology utilization and organizational innovation: evidence from Canadian healthcare decision makers.

    Science.gov (United States)

    Jbilou, Jalila; Landry, Réjean; Amara, Nabil; El Adlouni, Salaheddine

    2009-08-01

    Information and Communication Technology (ICT) and Organizational Innovation (OI) are seen as the miracle of post-modernity in organizations. In this way, they are supposed to resolve most organizational problems, efficiently and rapidly. OI is highly dependent on the capacity and the investment in knowledge management (internal and external) to support decision making process and to implement significant changes. We know what explains ICT utilization (ICTU) and what determines OI development (OID) in healthcare services. Moreover, the literature tends to link ICTU to OID and vice versa. However, this dependency has never been explored empirically through the lens of roles combination. To identify the existing combined roles profiles of ICTU and OID among healthcare decision makers and determine factors of the shift from a profile to another. We did the following: (1) a structured review of the literature on healthcare management by focusing on ICTU and OID which allowed us to build two indexes and a comprehensive framework; (2) a copula methodology to identify with high precision the thresholds for ICTU and OID; and (3) a cross-sectional study based on a survey done with a sample of 942 decision makers from Canadian healthcare organizations through a multinomial logit model to identify determinants of the shift. ICTU and OID are correlated at 22% (Kendal's Tau). The joint distribution (combination) of ICTU and OID shows that four major profiles exist among decision makers in Canadian healthcare organizations: the traditional decision maker, the innovative decision maker, the technologic decision maker and the contemporary decision maker. We found out that classic factors act as barriers to the shift from one profile to the desired profile (from 1 to 4, from 2 to 4 and from 3 to 4). We have identified that the attitude toward research and relational capital are transversal barriers of shift. We have also found that some factors have a specific impact such as

  10. Goal and Progress of Power Tariff Reform——An interview with Liu Zhenqiu, Vice Director of Department of Price, NDRC

    Institute of Scientific and Technical Information of China (English)

    Sha Yiqiang

    2008-01-01

    @@ Power tariff reform has made many important and many importan and substantial progresses in respect of marketization The benchmark tariff is a revolutionary progress made in China's power tariff reform

  11. Effectiveness and feasibility of utilizing E4D technology as a teaching tool in a preclinical dental education environment.

    Science.gov (United States)

    Callan, Richard S; Palladino, Christie L; Furness, Alan R; Bundy, Emily L; Ange, Brittany L

    2014-10-01

    Recent efforts have been directed towards utilizing CAD/CAM technology in the education of future dentists. The purpose of this pilot study was to investigate the feasibility of implementing CAD/CAM technology in instruction on preparing a tooth for restoration. Students at one dental school were assigned access to CAD/CAM technology vs. traditional preparation methods in a randomized, crossover design. In a convenience sample of a second-year class, seventy-six of the seventy-nine students volunteered to participate, for a response rate of 96 percent. Two analyses were performed on this pilot data: a primary effectiveness analysis comparing students' competency exam scores by intervention group (intention-to-treat analysis) and a secondary efficacy analysis comparing competency exam scores among students who reported using CAD/CAM versus those who did not. The effectiveness analysis showed no difference in outcomes by intervention group assignment. While student survey results indicated interest in utilizing the technology, the actual utilization rate was much less than one might anticipate, yielding a sample size that limited statistical power. The secondary analysis demonstrated higher mean competency exam scores for students reporting use of CAD/CAM compared to those who did not use the technology, but these results did not reach statistical significance (p=0.075). Prior research has investigated the efficacy of CAD/CAM in a controlled educational trial, but this study adds to the literature by investigating student use of CAD/CAM in a real-world, self-study fashion. Further studies should investigate ways in which to increase student utilization of CAD/CAM and whether or not increased utilization, with a larger sample size, would yield significant outcomes.

  12. Proceedings of the advanced research and technology development direct utilization, instrumentation and diagnostics contractors' review meeting

    Energy Technology Data Exchange (ETDEWEB)

    Geiling, D.W. (USDOE Morgantown Energy Technology Center, WV (USA)); Goldberg, P.M. (eds.) (USDOE Pittsburgh Energy Technology Center, PA (USA))

    1990-01-01

    The 1990 Advanced Research and Technology Development (AR TD) Direct Utilization, and Instrumentation and Diagnostics Contractors Review Meeting was held September 16--18, 1990, at the Hyatt at Chatham Center in Pittsburgh, PA. The meeting was sponsored by the US Department of Energy (DOE), Office of Fossil Energy, and the Pittsburgh and Morgantown Energy Technology Centers. Each year the meeting provides a forum for the exchange of information among the DOE AR TD contractors and interested parties. This year's meeting was hosted by the Pittsburgh Energy Technology Center and was attended by 120 individuals from industry, academia, national laboratories, and other governmental agencies. Papers were presented on research addressing coal surface, science, devolatilization and combustion, ash behavior, emission controls for gases particulates, fluid bed combustion and utilization in diesels and turbines. Individual reports are processed separately for the data bases.

  13. Tariff Basic Calculation. A program for the calculation of the National Basic Tariff. Tarief Basis Calculatie. Een programma voor de berekening van het LBT

    Energy Technology Data Exchange (ETDEWEB)

    Verhagen, L.

    1988-12-01

    Within the framework of the project 'Tariff systems and price forming of electric power', a spread-sheet program has been developed to calculate the costs of the electric power supply. The name of this program, written in Symphony 2.0 (English), is Tariff Basic Calculation (TBC). Based on the production data of the public power supply this program calculates the costs of the supply and derivative National Basic Tariffs elements. The program fits in with the Chronological Simulation Model (CSM) of the Energy Study Centre of the Netherlands Energy Research Foundation ECN. All necessary data can be calculated with CSM. 8 figs.

  14. PREDICTABLE TRENDS OF EU TARIFF POLICY IN GLOBALIZATION'S CONTEXT

    Directory of Open Access Journals (Sweden)

    Caba Stefan

    2011-12-01

    Full Text Available This paper consists of information regarding current situation of international trade relations, in particular those pertaining to EU, concerning to preferential trade agreements, the trend towards globalization and custom policies. The importance of this document is given by the identification of strategy trends in respect to EU tariff policy in the context of changes at commercial exchange level, as a consequence of international trade globalization's trend. The tariff policy, as a component of the trade one, represents a factor which influences companies behavior and, consequently the structure of import-export interstates relations. Specialty literature has lately identified a less natural phenomenon: starting with adoption by WTO states members of some measures and principles that emphasize the trade globalization tendency, a significant number of preferential agreements were settled in the meanwhile, many of them being bilateral, fact at least at first view is opposite to globalization phenomenon. The causes of this phenomenon have not been yet completely identified by economic analysts, so that these preferential trade agreements can be translated as a an impediment in the way of globalization and, on the contrary an intermediate phase and an accelerator of global extension trade exchange phenomenon. The present work ideas are based on analysis by bibliographic guide that link to historical GATT/WTO and principles which sustain its operation and to dynamic of international trade. Also, there have been studied data related to strategies of trade policy adopted by EU. The results consist of information about tariff policy elements adopted or forecasted by EU in general strategic context of participation to international trade. Particularly, it is emphasized the new competencies that must be achieved by custom personnel because of changes in trade exchanges. The main idea is represented by the necessity of custom authorities responsibility

  15. Environmental and international tariffs in a mixed duopoly

    Science.gov (United States)

    Ferreira, Fernanda A.; Ferreira, Flávio

    2013-10-01

    In this paper, we study the effects of environmental and trade policies in an international mixed duopoly serving two markets, in which the public firm maximizes the sum of consumer surplus and its profit. We also analyse the effects of privatization. The model has two stages. In the first stage, governments choose environmental taxes and import tariffs, simultaneously. Then, the firms engage in a Cournot competition, choosing output levels for the domestic market and to export. We compare the results obtained in the three different ways of moving on the decision make of the firms.

  16. Innovative Feed-In Tariff Designs that Limit Policy Costs

    Energy Technology Data Exchange (ETDEWEB)

    Kreycik, Claire [National Renewable Energy Lab. (NREL), Golden, CO (United States); Couture, Toby D. [E3 Analytics, Berlin (Germany); Cory, Karlynn S. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2011-06-01

    Feed-in tariffs (FITs) are the most prevalent policy used globally to reduce development risks, cut financing costs, and grow the renewable energy industry. However, concerns over escalating costs in jurisdictions with FIT policies have led to increased attention on cost control. Using case studies and market-focused analysis, this report from the National Renewable Energy Laboratory (NREL) examines strengths and weaknesses of three cost-containment tools: (1) caps, (2) payment level adjustment mechanisms, and (3) auction-based designs. The report provides useful insights on containing costs for policymakers and regulators in the United States and other areas where FIT policies are in development.

  17. The economy-wide impact of multilateral NAMA tariff reductions

    DEFF Research Database (Denmark)

    Jensen, Hans Grinsted; Baltzer, Kenneth; Babula, Ronald

    The Non-Agricultural Market Access (NAMA) negotiations were a key area in the Doha development round, which was suspended indefinitely in July 2006. In this paper, we model and estimate the economic effects on the world and Danish economies of some of the more important proposals that will likely...... tariff reductions with flexibility would generate modest increases in Danish trade and produce a slight improvement in the trade balance. They would also shift Danish trade patterns from EU and EFTA markets towards other world markets. The removal of the developing country flexibility rule would increase...

  18. Influence of firm related factors and industrial policy regime on technology based capacity utilization in sugar industry in Nigeria

    Directory of Open Access Journals (Sweden)

    S. B. Akpan

    2011-09-01

    Full Text Available The study analyzed the technology based capacity utilization rate in sugar industry in Nigeria in the period 1970 to 2010. Data used in the study were obtained from the sugar firms, publications of the Central Bank of Nigeria and National Bureau of Statistics. Augmented Dicker Fuller unit root test was conducted on the specified data to ascertain their stationarity and order of integration. The result reveals that some variables were stationary at level while some were stationary at first difference. The diagnostic statistics from the multiple log linear regression on the specified variables confirmed the reliability of the model. The empirical result reveals that sugar cane price and sugar industry’s real energy consumption have significant negative relationship with the technology based capacity utilization in the sugar industry in Nigeria. On the other hand, the wage rate of skill workers, industry’s, real research expenditure, human capital and period of import substitution have significant positive influenced on the technology based capacity utilization rate in the industry. Our findings suggest that policy measures aim at expanding the hectares of industrial sugarcane and increase production of refined petroleum fuel in the country will promote capacity utilization in the industry. Also policies targeted on the intensification of research and improved worker’s remuneration in the sub-sector is strongly advocated.

  19. The Chinese Politics of Communication Technology: Utility, State Building and Control

    Science.gov (United States)

    Su, Dan

    2012-01-01

    This study provides an examination into the formulation and construction of information and communication technology policy in China. It traces the rise of information technology and the "informatization" drive in China's political rhetoric, and identifies the changes and trajectory of information and communication technology in China's…

  20. Charting the Emergence of Corporate Procurement of Utility-Scale PV

    Energy Technology Data Exchange (ETDEWEB)

    Heeter, Jenny S [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Cook, Jeffrey J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Bird, Lori A [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-09-07

    Corporations and other institutions have contracted for more than 2300 MW of off-site solar, using power purchase agreements, green tariffs, or bilateral deals with utilities. This paper examines the benefits, challenges, and outlooks for large-scale off-site solar purchasing in the United States. Pathways differ based on where they are available, the hedge value they can provide, and their ease of implementation. The paper features case studies of an aggregate PPA (Massachusetts Institute of Technology, Boston Medical Center, and Post Office Square), a corporation exiting their incumbent utility (MGM Resorts), a utility offering large scale renewables to corporate customers (Alabama Powers Renewable Procurement Program), and a company with approval to sell energy into wholesale markets (Google Energy Inc.).

  1. 49 CFR 1312.10 - Notification of tariff changes and nature of changes.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 9 2010-10-01 2010-10-01 false Notification of tariff changes and nature of... WATER CARRIER IN NONCONTIGUOUS DOMESTIC TRADE § 1312.10 Notification of tariff changes and nature of... changes and their nature (whether an increase or decrease in service, rates or transportation charges)....

  2. 18 CFR 35.28 - Non-discriminatory open access transmission tariff.

    Science.gov (United States)

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Non-discriminatory open... AND TARIFFS Other Filing Requirements § 35.28 Non-discriminatory open access transmission tariff. (a... available supply falls short ofdemand plus the operating reserve requirement. (7) Market Monitoring...

  3. EFFECT OF TARIFF ESCALATION ON GHANAIAN COCOA EXPORTS: AN EMPIRICAL PERSPECTIVE

    Directory of Open Access Journals (Sweden)

    Ahmed Abdul Aziz

    2017-01-01

    Full Text Available This study analyses the effects of tariff escalation on Ghanaian cocoa exports in four importing markets: USA, EU, Japan and Malaysia. The study estimates nominal and effective protection coefficients in these markets based on ad-valorem equivalent of applied and bound specific tariffs. Results revealed that, effective protection exists in the Japanese and Malaysian cocoa industries at different stages of processing on both bound and applied tariffs. In contrast, the USA and the EU do not effectively protect their cocoa industries, thus, no tariff escalation on applied tariffs against cocoa imports from Ghana. This study concludes that from a static effect, higher tariffs do have a negative consequence on Ghanaian cocoa exports in these importing countries. From a dynamic perspective however, the relationship between tariff structures in these importing countries and Ghanaian cocoa exports is somewhat ambiguous and each situation has to be viewed on their own merit. A complete elimination of tariffs as a form of trade barrier on Ghanaian cocoa exports does not necessarily imply that Ghana could easily increase its exports of value added cocoa.

  4. 76 FR 61074 - USDA Increases the Fiscal Year 2011 Tariff-Rate Quota for Refined Sugar

    Science.gov (United States)

    2011-10-03

    ... Office of the Secretary USDA Increases the Fiscal Year 2011 Tariff-Rate Quota for Refined Sugar AGENCY... increase in the fiscal year (FY) 2011 refined sugar tariff-rate quota (TRQ) of 136,078 metric tons raw... MTRV for sugars, syrups, and molasses (collectively referred to as refined sugar) described in...

  5. 76 FR 61472 - Revised Fiscal Year 2011 Tariff-Rate Quota Allocations for Refined Sugar

    Science.gov (United States)

    2011-10-04

    ... TRADE REPRESENTATIVE Revised Fiscal Year 2011 Tariff-Rate Quota Allocations for Refined Sugar AGENCY... the fiscal year (FY) 2011 in-quota quantity of the tariff-rate quota (TRQ) for imported refined sugar... imports of refined sugar. Section 404(d)(3) of the Uruguay Round Agreements Act (19 U.S.C. 3601(d)(3...

  6. 14 CFR 221.180 - Requirements for electronic filing of tariffs.

    Science.gov (United States)

    2010-01-01

    ... defined in this subpart. (12) The filer must provide a field in the Government Filing File for the... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Requirements for electronic filing of... Requirements for electronic filing of tariffs. (a) No carrier or filing agent shall file an electronic tariff...

  7. 78 FR 8434 - Dairy Tariff-Rate Import Quota Licensing Program

    Science.gov (United States)

    2013-02-06

    ...; ] DEPARTMENT OF AGRICULTURE Foreign Agricultural Service 7 CFR Part 6 RIN 0551-AA82 Dairy Tariff-Rate Import... rulemaking. SUMMARY: Request for public comment on the Dairy Tariff-Rate Import Quota Licensing Program..., Agricultural Marketing Specialist, Sugar and Dairy Branch, Import Programs and Export Reporting...

  8. Aluminum Production Cost Drops to 375 Yuan/Tonne After On-Grid Power Tariff Cut

    Institute of Scientific and Technical Information of China (English)

    2016-01-01

    Following the cut of coal-fired on-grid power tariff in April 2015,in 2016 the coal-fired ongrid power tariff experienced another cut.The average nationwide cut was about0.03yuan/k Wh,the reduced amount will be used to lower general industrial and commercial electricity sales price by the same

  9. A global survey of urban water tariffs: are they sustainable, efficient and fair?

    NARCIS (Netherlands)

    Zetland, D.J.; Gasson, C.

    2013-01-01

    This paper examines the relations between tariffs and sustainability, efficiency and equity, using a unique data-set for 308 cities in 102 countries. Higher water tariffs are correlated with lower per capita consumption, smaller local populations, lower water availability, higher demand and a lower

  10. 19 CFR 10.410 - Filing of claim for preferential tariff treatment upon importation.

    Science.gov (United States)

    2010-04-01

    ... RATE, ETC. United States-Chile Free Trade Agreement Import Requirements § 10.410 Filing of claim for preferential tariff treatment upon importation. (a) Declaration. In connection with a claim for preferential... 19 Customs Duties 1 2010-04-01 2010-04-01 false Filing of claim for preferential tariff...

  11. 19 CFR 10.510 - Filing of claim for preferential tariff treatment upon importation.

    Science.gov (United States)

    2010-04-01

    ... RATE, ETC. United States-Singapore Free Trade Agreement Import Requirements § 10.510 Filing of claim for preferential tariff treatment upon importation. (a) Claim. An importer may make a claim for SFTA... 19 Customs Duties 1 2010-04-01 2010-04-01 false Filing of claim for preferential tariff...

  12. 19 CFR 10.583 - Filing of claim for preferential tariff treatment upon importation.

    Science.gov (United States)

    2010-04-01

    ... RATE, ETC. Dominican Republic-Central America-United States Free Trade Agreement Import Requirements § 10.583 Filing of claim for preferential tariff treatment upon importation. (a) Basis of claim. An... 19 Customs Duties 1 2010-04-01 2010-04-01 false Filing of claim for preferential tariff...

  13. 19 CFR 10.712 - Verification of claim for preferential tariff treatment.

    Science.gov (United States)

    2010-04-01

    ... States-Jordan Free Trade Agreement Origin Verifications § 10.712 Verification of claim for preferential tariff treatment. A claim for preferential tariff treatment made under § 10.703 of this subpart... 19 Customs Duties 1 2010-04-01 2010-04-01 false Verification of claim for preferential...

  14. 19 CFR 10.616 - Verification and justification of claim for preferential tariff treatment.

    Science.gov (United States)

    2010-04-01

    ... RATE, ETC. Dominican Republic-Central America-United States Free Trade Agreement Origin Verifications and Determinations § 10.616 Verification and justification of claim for preferential tariff treatment... preferential tariff treatment. 10.616 Section 10.616 Customs Duties U.S. CUSTOMS AND BORDER...

  15. Real-Time Tariffs for Electric Vehicles in Wind Power based Power Systems

    DEFF Research Database (Denmark)

    Morais, Hugo; Sousa, Tiago; Silva, Marco

    2013-01-01

    The use of Electric Vehicles (EVs) will change significantly the planning and management of power systems in a near future. This paper proposes a real-time tariff strategy for the charge process of the EVs. The main objective is to evaluate the influence of real-time tariffs in the EVs owners...

  16. Health care utilization patterns in developing countries: role of the technology environment in "deriving" the demand for health care.

    Science.gov (United States)

    Wouters, A V

    1992-01-01

    Health care services, in combination with several intermediate (proximate) determinants of health such as environmental sanitation and nutrition, directly influence health status. In the economics literature, this is referred to as the health production technology. Although many studies recognize that demand for health care depends on the health production technology, otherwise known as a "derived" demand, this review indicates that few of them have so far been able to fully incorporate this technology in estimating significant determinants of health care use. Understanding the technology environment could help explain why substantial portions of the population do not gain access to care even when financial factors do not appear to be a barrier. Also, low utilization of health services may simply reflect the low productivity of these services when other complementary factors such as nutrition or clean water and sanitation are lacking. Finally, since health-producing technology is often a multistep (multivisit) process, health care demand studies generally offer an incomplete picture of health care utilization patterns because they focus on a single event such as the first visit of an illness episode. Researchers should obtain more complete information on the interaction between all health production inputs, their availability and access to them. Multidisciplinary methodologies are likely to be useful.

  17. Schemes for aggregating preferential tariffs in agriculture,export volume effects and African LDCs

    DEFF Research Database (Denmark)

    Yu, Wusheng

    Trade-weighted aggregated tariffs (TWPT) are often used in analyzing the issues of erosion of non-reciprocal preferences. This paper argues that commonly used TWPTs under-estimate the true protection on imports originated from preference-receiving countries, including LDCs. When used in numerical...... simulations of preference erosion and expansion scenarios, the TWPTs tend to incorrectly downplay preference erosion effect of MFN tariff cuts, and understate the export promotion effect of expanding preferences. In light of these claims, an alternative aggregation scheme is developed to calculate aggregated...... preferential tariffs imposed by a number of developed countries on African LDCs. These are shown to be higher than the TWPTs aggregated from the same disaggregated tariff data set. Numerical simulations conducted with the two sets of aggregated tariffs confirm the two claims and suggest that TWPTs may lead...

  18. A Comparison of Undergraduate Faculty and Millennial Students regarding the Utilization of Weblog and Podcast Technology in a Teacher Education Department

    Science.gov (United States)

    Ennis, Leslie Sturdivant; Gambrell, Elizabeth Anne

    2010-01-01

    The main objective of the study was to compare the utilization of weblog and podcast technology by undergraduate university faculty and Millennial college students. The study was conducted to test the hypothesis, formed from existing literature, that there might be a difference in the utilization of weblog and podcast technology between faculty…

  19. Solar Energy Technologies and the Utilization on Native American Tribal Lands

    Energy Technology Data Exchange (ETDEWEB)

    Hall, Kathryn [Univ. of North Dakota, Grand Forks, ND (United States)

    2017-08-31

    As an undergraduate researcher, I worked on a new technology called nanofluid-based direct absorption solar collectors (DASC) which is a type of solar water heater that has the potential to be more efficient than traditional solar water heaters. Because of my experience with this type of technology, I decided to look into other types of solar energy technologies which could be used on Native American tribal lands. Some types of solar energy technologies that I wanted to focus on are photovoltaic solar energy systems, passive solar design, and solar water heaters.

  20. Knowledge and utilization of information communication technology (ICT) among health science students at the University of Gondar, North Western Ethiopia.

    Science.gov (United States)

    Woreta, Solomon Assefa; Kebede, Yigzaw; Zegeye, Desalegn Tegabu

    2013-03-03

    Despite the relatively huge ICT investment and policy deployment in higher institutions in Ethiopia, there is still scant information about the success of implementation of the Information Communication Technology (ICT) in the higher education. This study, therefore, was carried out with an aim to assess knowledge and utilization of Information Communication Technology (ICT) among medicine and health science students and its associated factors in Gondar College of Medicine and Health sciences, University of Gondar. A cross-sectional study was conducted at the College of Medicine and Health Sciences, University of Gondar, Ethiopia. Data regarding socio-demographic characteristics of the students, level of knowledge and utilization of ICT were collected by means of a self-administered questionnaire. Data was analyzed using SPSS version 13. A total of 1096 students responded giving a response rate of 97.8%. The mean age of the study participants was 20.3 (±1. 3) years. Females constitute only 26% of the respondents. The majority (79%) were fulltime students. Only half of the respondents (51%) had ICT knowledge and only 46% students utilized ICT while 47% of the respondents never used electronic communication (e.g. email or chat room) and 39% of the respondents never used Microsoft office (e.g. word (®) or WordPerfect (®)). ICT knowledge [AOR = 2.5, 95% CI: 1.7-3.5], family educational background [AOR = 4.36, 95% CI: 2.16-8.80], and perceived quality of training [AOR = 1.9, 95% CI: 1.3-2.8] showed strong and positive associations with ICT utilization. Students from urban areas were more likely to utilize ICT compared with those from rural areas [AOR = 2.7, 95% CI: 2.097, 3.497], and information technology training was found to be positively associated with ICT utilization [AOR = 2. 07, 95% CI: 1.18, 3.62]. The result showed that students' knowledge was inadequate and utilization of ICT was poor. Therefore, the university should sustain professional development to

  1. Communications technologies for demand side management, DSM, and European utility communications architecture, EurUCA

    Energy Technology Data Exchange (ETDEWEB)

    Kaerkkaeinen, S.; Kekkonen, V. [VTT Energy, Espoo (Finland); Rissanen, P. [Tietosavo Oy (Finland)

    1996-12-31

    In this project the main target is to develop and assess methods for DSM (Demand Side Management) and distribution automation planning from the utility`s point of view. The final goal is to integrate these methods for the strategic planning of electric utilities. In practice the project is divided into four main parts: The development and assessment of DSM/IRP planning methods and cost/benefit analysis as a part of international co-operation (IEA DSM Agreement: Annex IV, European Cost/Benefit analysis of DSM, EUBC, and Finnish SAVE-project started in 1995 in co-operation with SRC International and six electric utilities in Finland); Development of PC-based DSM planning and assessment tools at VTT; Development of a decision support system of distribution network planning including DSM options at Tietosavo Oy and Integration of DSM planning and network planning tools in co-operation with VTT Energy and Tietosavo Oy

  2. Technology evaluation of control/monitoring systems for MIUS application. [utility services management

    Science.gov (United States)

    Pringle, L. M., Jr.

    1974-01-01

    Potential ways of providing control and monitoring for the Modular Integrated Utility System (MIUS) program are elaborated. Control and monitoring hardware and operational systems are described. The requirements for the MIUS program and the development requirements are discussed.

  3. Technology utilization in a non-urban region: Further impact and technique of the Technology Use Studies Center

    Science.gov (United States)

    1976-01-01

    Updated information is given pertaining to Technology Use Studies Center (TUSC) clients who are those that receive/use information as disseminated by the center. The client information is presented as a continuation of client data as set forth in the center's previous annual report.

  4. Utilizing Technology to Improve the Administration of Instructional Physical Activity Programs in Higher Education

    Science.gov (United States)

    Melton, Bridget; Burdette, Trey

    2011-01-01

    The purpose of this article is to provide examples of how technology is being used in one university to increase the organization and effectiveness of instructional physical activity programs (IPAPs). The article outlines ways in which technology can organize materials for students, instructors, and programs. Additionally, the article describes…

  5. Utilizing GIS to Examine the Relationship Between State Renewable Portfolio Standards and the Adoption of Renewable Energy Technologies

    Directory of Open Access Journals (Sweden)

    Chelsea Schelly

    2013-12-01

    Full Text Available In the United States, there is no comprehensive energy policy at the federal level. To address issues as diverse as climate change, energy security, and economic development, individual states have increasingly implemented Renewable Portfolio Standards (RPSs, which mandate that utility providers include a specified amount of electricity from renewable energy sources in their total energy portfolios. Some states have included incentives for individual energy technologies in their RPS, such as solar electric (also called photovoltaic or PV technology. Here, we use GIS to visualize adoption of RPSs and electricity generation from renewable energy sources in the US and examine changes in renewable electricity and solar electric generation over time with the goal of informing future policies aimed at promoting the adoption of renewable energy technologies.

  6. Energy utilization and environmental control technologies in the coal-electric cycle

    Energy Technology Data Exchange (ETDEWEB)

    Ferrell, G.C.

    1977-10-01

    This report presents an overview and assessment of the currently commercial and possible future technologies in the United States that are a part of the coal-electric cycle. From coal production to residual emissions control at the power plant stack, this report includes a brief history, current status and future assessment of each technology. It also includes a discussion, helpful for policy making decisions, of the process operation, environmental emission characteristics, market constraints and detailed cost estimates for each of these technologies, with primary emphasis on coal preparation, coal-electric generation and emissions control systems.

  7. 78 FR 78352 - Orlando Utilities Commission; Notice of Filing

    Science.gov (United States)

    2013-12-26

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Orlando Utilities Commission; Notice of Filing Take notice that on December 18, 2013, Orlando Utilities Commission submitted its tariff filing per 35.28(e): Order No....

  8. 76 FR 25685 - Orlando Utilities Commission; Notice of Filing

    Science.gov (United States)

    2011-05-05

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Orlando Utilities Commission; Notice of Filing Take notice that on April 15, 2011, Orlando Utilities Commission submitted its tariff filing per 35.25(e): Order 890 compliance to...

  9. 75 FR 37789 - Orlando Utilities Commission; Notice of Filing

    Science.gov (United States)

    2010-06-30

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Orlando Utilities Commission; Notice of Filing June 23, 2010. Take notice that on June 11, 2010, the Orlando Utilities Commission filed, pro forma revised tariff sheets...

  10. 76 FR 35209 - Orlando Utilities Commission; Notice of Filing

    Science.gov (United States)

    2011-06-16

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Orlando Utilities Commission; Notice of Filing Take notice that on May 26, 2011, Orlando Utilities Commission submitted its tariff filing per 35.17(b): Amendment to...

  11. Electrochemically Modulated Gas/Liquid Separation Technology for In Situ Resource Utilization Process Streams Project

    Data.gov (United States)

    National Aeronautics and Space Administration — In this phase I program MicroCell Technologies, LLC (MCT) proposes to demonstrate the feasibility of an electrochemically modulated phase separator for in situ...

  12. Fusion Teaching: Utilizing Course Management Technology to Deliver an Effective Multimodal Pedagogy

    Science.gov (United States)

    Childs, Bradley D.; Cochran, Howard H.; Velikova, Marieta

    2013-01-01

    Fusion teaching merges several pedagogies into a coherent whole. Course management technology allows for the digitization and delivery of pedagogies in an effective and exciting manner. Online course management options more easily enable outcome assessment and monitoring for continuous improvement.

  13. The Utilization Methods of Multi-Media Technology in Higher VocationalEnglish Teaching

    Institute of Scientific and Technical Information of China (English)

    尚晓艳

    2011-01-01

    Not only does the multi-media technology in teaching help students arouse curiosity and draw their attention,but also it makes students enhance their language skills and master knowledge.It makes English teaching smooth.

  14. Adaptive interaction a utility maximization approach to understanding human interaction with technology

    CERN Document Server

    Payne, Stephen J

    2013-01-01

    This lecture describes a theoretical framework for the behavioural sciences that holds high promise for theory-driven research and design in Human-Computer Interaction. The framework is designed to tackle the adaptive, ecological, and bounded nature of human behaviour. It is designed to help scientists and practitioners reason about why people choose to behave as they do and to explain which strategies people choose in response to utility, ecology, and cognitive information processing mechanisms. A key idea is that people choose strategies so as to maximise utility given constraints. The frame

  15. Diffusion and utilization of scientific and technological knowledge within state and local governments

    Science.gov (United States)

    Feller, I.; Flanary, P. E.

    1979-01-01

    The state-of-the-art is reviewed concerning current knowledge of processes by which technological innovation and scientific information are disseminated among state and local governments. The effectiveness of various mechanisms, strategies, and approaches by which federal agencies have sought to transfer technology to state, regional, and city governments are assessed. It is concluded that the existing relationships between the state and local governments, and the scientific communities are not adequate.

  16. Mobile nursing information system utilization: the task-technology fit perspective.

    Science.gov (United States)

    Lin, Tung-Cheng

    2014-03-01

    Task-technology fit theory considers how technology may best be deployed to support individuals and facilitate the completion of tasks. This study separates the fit construct into the two realms of task-technology fit and technology-individual fit and integrates organization readiness with the objective of investigating the effectiveness of mobile nursing information systems in terms of helping nursing staff to accomplish daily clinical tasks. Study participants were clinical professionals with system usage experience who work at one medical center. Results indicated that technology-individual fit is the factor that most strongly influences usage, followed respectively by task-technology fit and organization readiness. Therefore, strategies designed to implement mobile nursing information systems should focus greater effort on fitting the system to system users by making these systems easy to learn and use, and training easy to complete. System functions should not only facilitate accomplishment of daily clinical tasks such as quickly obtaining information and accurate data but also be portable and provide a user-friendly, easy-to-operate interface. Organizational readiness, the commitment and support of top management, and nursing staff willingness to learn and use the new system are also important factors that influence system usage.

  17. HIV Excision Utilizing CRISPR/Cas9 Technology: Attacking the Proviral Quasispecies in Reservoirs to Achieve a Cure.

    Science.gov (United States)

    Dampier, Will; Nonnemacher, Michael R; Sullivan, Neil T; Jacobson, Jeffrey M; Wigdahl, Brian

    2014-10-17

    Recently several gene-editing technologies developed are being explored for their potential utility in providing new and unique treatments for HIV. One of these technologies is the clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated (Cas)9 system. This system is being explored for its utility against host genes important to HIV infection, namely the HIV coreceptor CCR5, and for excision of the integrated genome from infected cells by targeting selected genes or genomic regions, especially the HIV-1 promoter or long terminal repeat (LTR). One of the major hurdles with the development of this technology for use in patients is defining the LTR sequence spectrum within the viral quasispecies present in the integrated virus and how that effects the number of guide RNAs (gRNAs) required to completely excise all proviral genomes. In this study, the Drexel Medicine CNS AIDS Research and Eradication Study (CARES) Cohort was utilized to demonstrate that [1] the predominant sequence of the integrated proviral LTR within the PBMC compartment shows a decrease in the amount of variation per year regardless of the type of therapy; [2] predominant HIV-1 LTR sequence undergoes continued genetic change with respect to the predominant genotype in these cells for at least 6 years while on effective suppressive ART; [3] using next generation sequencing (NGS), to demonstrate that 4 of the 8 patient samples examined could have a complete gRNA regimen designed to target all known quasispecies; and [4] length of HAART therapy may reduce the number of gRNA required to eradicate provirus as shown by NGS and gRNA design for longitudinal samples of patient A0017 in the CARES cohort. Overall, these studies demonstrate the feasibility of addressing at least one of the major technological challenges of CRISPR/Cas9-mediated HIV-1 proviral genome eradication involving the effective targeting of all viral quasispecies in a given patient sample.

  18. WTO UpholdsU.S.Tariffs on Tires from China

    Institute of Scientific and Technical Information of China (English)

    Lesley Cui

    2011-01-01

    The World Trade Organization on September 5released the ruling of its Appellate Body,upholding President Obama's decision to impose three-year punitive tariffs on Chinese passenger and light truck tires.The Obama administration in September 2009placed a 35 percent safeguard duty on tires for cars and light trucks that Chinese manufacturers exported to the US,after the United Steelworkers (USW) complained that surging imports hurt home producers.Chinese tire imports were shown to have surged to record levels in the five years prior to the filing of the petition,causing significant market disruption.According to the USW,Chinese tire imports by volume grew 215%from 2004 until 2008,reaching a volume of 46 million tires.

  19. Supporting Effective Feed-in Tariff Development in Malaysia

    Energy Technology Data Exchange (ETDEWEB)

    2016-04-01

    Since 2011, Malaysia's overarching policy framework for clean energy development, the New Energy Policy, has led to significant deployment of renewable energy and energy efficiency. Building on the New Energy Policy, Malaysia mandated adoption of a renewable energy feed-in tariff (FiT) mechanism under the 2011 Renewable Energy Act. In 2013, Malaysia's Sustainable Energy Development Authority partnered with the Clean Energy Solutions Center and the Clean Energy Regulators Initiative (CERI), via the Ask an Expert service, to implement FiT policies and expand renewable energy development. Through collaboration between the government of Malaysia and the Clean Energy Solutions Center, concrete policy action was supported and implemented, building a strong framework to expand and catalyze clean energy development.

  20. Evaluating Welfare Effects of Rice Import Quota in Japan: Based on Measuring Non-Tariff Barriers of SBS Rice Imports

    Directory of Open Access Journals (Sweden)

    Qianhui Gao

    2016-08-01

    Full Text Available The principal objective of this study is to analyze welfare effects of Japan’s rice import quota focusing on the simultaneous buy and sell (SBS of the rice importation minimum access (MA policy. Based on the utility function specified in this study, the constructed model is adopted to measure consumption patterns through estimating elasticity of substitution between imported rice and Japan’s domestic rice, and consumers’ preference parameters for different kinds of rice. The results showed that Japanese households prefer domestic rice to the imported rice. Besides, three scenarios of adjusting rice quota volumes were carried out to examine the changes in consumer prices of imported rice and Japanese consumers’ welfares. The results revealed that tariff equivalents of the SBS import quota almost doubled the scale of the mark-up, and the intervention by the Ministry of Agriculture of Japan did cause non-tariff barriers to trade (NTBs. Finally, if the SBS rice quota quantity was fixed at or larger than 180 thousand tons every fiscal year, the consumer prices of imported rice in Japan’s market would decrease to be less than the prices of Japan’s domestic rice, and therefore the imported rice would have more price advantages in this scenario.

  1. Population health-based approaches to utilizing digital technology: a strategy for equity.

    Science.gov (United States)

    Graham, Garth N; Ostrowski, MaryLynn; Sabina, Alyse B

    2016-11-01

    Health care disparities and high chronic disease rates burden many communities and disproportionally impact racial/ethnic populations in the United States. These disparities vary geographically, increase health care expenses, and result in shortened lifespans. Digital technologies may be one tool for addressing health disparities and improving population health by increasing individuals' access to health information-especially as most low-income U.S. residents gain access to smartphones. The Aetna Foundation partners with organizations to use digital technologies, including mobile applications, data collection, and related platforms, for learning and sharing. Projects range from the broad-childhood education, lifestyle modification, health IT training, and nutrition education, to the specific-local healthy foods, stroke rehabilitation, and collection of city-level data. We describe our approaches to grantmaking and discuss lessons learned and their implications. When combined with sound policy strategies, emerging, scalable, digital technologies will likely become powerful allies for improving health and reducing health disparities.

  2. Technologies for utilizing natural resources create new job opportunities in the geosciences in developing countries

    Science.gov (United States)

    Aswathanarayana, U.

    Water, soils, minerals, and biota constitute a community's most significant natural resources. Innovations in technology are generating new jobs in converting into a resource what was yesterday a non-resource; in developing process and control technologies to minimize wastes; and in waste recycling.“Resources are not, they become,” in the words of Zimmerman. In the case of the developing countries, the technologies of choice have not only to be ecologically sustainable and economically viable, but more importantly, employment generating. The new kinds of jobs—for example, in poverty alleviation projects via micro-enterprises based on value-added processing of natural resources—have a strong environmental relevance and tend to lie at the interface of several traditional scientific disciplines. Geoscience graduates in the developing countries are best placed to take advantage of these new job opportunities involving Earth materials, but only if they are exposed to broad-based geoscience instruction.

  3. Interactions of microorganisms with rare earth ions and their utilization for separation and environmental technology.

    Science.gov (United States)

    Moriwaki, Hiroshi; Yamamoto, Hiroki

    2013-01-01

    In recent years, rare earth elements (REEs) have been widely used in various modern technological devices and the global demand for REE has been increasing. The increased demand for REEs has led to environmental exposure or water pollution from rare earth metal mines and various commercial products. Therefore, the development of a safe technology for the separation and adsorption of REEs is very important from the perspective of green chemistry and environmental pollution. In this review, the application and mechanisms of microorganisms for the removal and extraction of REEs from aqueous solutions are described. In addition, the advantages in using microorganisms for REE adsorption and future studies on this topic are discussed.

  4. The role of clean coal technologies in a deregulated rural utility market

    Energy Technology Data Exchange (ETDEWEB)

    Neal, J.W. [National Rural Electric Cooperative Association, Arlington, VA (United States)

    1997-12-31

    The nation`s rural electric cooperatives own a high proportion of coal-fired generation, in excess of 80 percent of their generating capacity. As the electric utility industry moves toward a competitive electricity market, the generation mix for electric cooperatives is expected to change. Distributed generation will likely serve more customer loads than is now the case, and that will lead to an increase in gas-fired generation capacity. But, clean low-cost central station coal-fired capacity is expected to continue to be the primary source of power for growing rural electric cooperatives. Gasification combined cycle could be the lowest cost coal based generation option in this new competitive market if both capital cost and electricity production costs can be further reduced. This paper presents anticipated utility business scenarios for the deregulated future and identifies combined cycle power plant configurations that might prove most competitive.

  5. New technology for comprehensive utilization of aluminum-chromium residue from chromium salts production

    Institute of Scientific and Technical Information of China (English)

    LI Xiao-bin; QI Tian-gui; JIANG Xin-min; ZHOU Qiu-sheng; LIU Gui-hua; PENG Zhi-hong; HAN Deng-lun; ZHANG Zhong-yuan; YANG Kun-shan

    2008-01-01

    Colloidal aluminum-chromium residue(ACR) was mass-produced in chromate production process, and the large energy consumption and high recovery cost existed in traditional methods of utilizing such ACR. To overcome those problems, a new comprehensive method was proposed to deal with the ACR, and was proven valid in industry. In the new process, the chromate was separated firstly from the colloidal ACR by ripening and washing with additives, by which more than 95% hexavalent chromium was recovered. The chromium-free aluminum residue(CFAR), after properly dispersed, was digested at 120-130 ℃ and more than 90% alumina can be recovered. And then the pregnant aluminate solution obtained from digestion was seeded to precipitate aluminum hydroxide. This new method can successfully recover both alumina and sodium chromate, and thus realize the comprehensive utilization of ACR from chromate industry.

  6. Evaluation of Particle Counter Technology for Detection of Fuel Contamination Detection Utilizing Fuel System Supply Point

    Science.gov (United States)

    2014-06-19

    utilizing Fuel System Supply Point Joel Schmitigal U S Army Tank Automotive Research DISTRIBUTION STATEMENT A. Approved for public release; distribution...UNCLASSIFIED 6 UNCLASSIFIED Receipt Vehicle Fuel Tank Fuel Injector Aviation Fuel DEF (AUST) 5695B 18/16/13 Parker 18...Test Center while AMRDEC was conducting Alcohol to Jet (ATJ) fuel flight tests (17). The test results indicated that on-line particle counters

  7. Estimating CO{sub 2} Emission Reduction of Non-capture CO{sub 2} Utilization (NCCU) Technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Ji Hyun; Lee, Dong Woog; Gyu, Jang Se; Kwak, No-Sang; Lee, In Young; Jang, Kyung Ryoung; Shim, Jae-Goo [KEPCO Research Institute, Daejon (Korea, Republic of); Choi, Jong Shin [Korea East-West Power Co., LTD(ETP), Ulsan (Korea, Republic of)

    2015-10-15

    Estimating potential of CO{sub 2} emission reduction of non-capture CO{sub 2} utilization (NCCU) technology was evaluated. NCCU is sodium bicarbonate production technology through the carbonation reaction of CO{sub 2} contained in the flue gas. For the estimating the CO{sub 2} emission reduction, process simulation using process simulator (PRO/II) based on a chemical plant which could handle CO{sub 2} of 100 tons per day was performed, Also for the estimation of the indirect CO{sub 2} reduction, the solvay process which is a conventional technology for the production of sodium carbonate/sodium bicarbonate, was studied. The results of the analysis showed that in case of the solvay process, overall CO{sub 2} emission was estimated as 48,862 ton per year based on the energy consumption for the production of NaHCO{sub 3} (7.4 GJ/tNaHCO{sub 3}). While for the NCCU technology, the direct CO{sub 2} reduction through the CO{sub 2} carbonation was estimated as 36,500 ton per year and the indirect CO{sub 2} reduction through the lower energy consumption was 46,885 ton per year which lead to 83,385 ton per year in total. From these results, it could be concluded that sodium bicarbonate production technology through the carbonation reaction of CO{sub 2} contained in the flue was energy efficient and could be one of the promising technology for the low CO{sub 2} emission technology.

  8. Using multi-attribute utility theory to select an information technology (IT infrastructure for learning object repositories (LOR

    Directory of Open Access Journals (Sweden)

    Guilherme Bizarro Salve

    2014-07-01

    Full Text Available The purpose of this article is to apply the methodology to structure the decision problem and select an appropriate LOR architecture. This reflected in the need to invest and improve the technology for educational organizations. Selecting an appropriate infrastructure for LOR is usually a complex decision, because it has conflicting attributes. In situations of uncertainty, multi-attribute utility theory (MAUT assists in selecting the best alternative according to criteria established by the decision maker. Results demonstrated that the choice of indexing and distributing LOR (A4 is less sensitive to changes and has greater utility. According to the analysis, A4 is the option most suitable for deploying IT infrastructure in the case of application. Researchers and professional managers can assess the types of ROA architecture and replicate this decision model to find similar results.

  9. Evaluation of Information and Communication Technology Utilization by Small Holder Banana Farmers in Gatanga District, Kenya

    Science.gov (United States)

    Mwombe, Simon O. L.; Mugivane, Fred I.; Adolwa, Ivan S.; Nderitu, John H.

    2014-01-01

    Purpose: The study was carried out to identify information communication technologies (ICTs) used in production and marketing of bananas, to determine factors influencing intensity of use of ICT tools and to assess whether use of ICT has a significant influence on adoption of tissue culture bananas by small-scale banana farmers in Gatanga…

  10. Appraisal of the Availability and Utilization of Information and Communication Technology in the Higher Education System

    Science.gov (United States)

    Ogbuozobe, J. E.; Okeke, Emeka Paul

    2014-01-01

    The availability and functionality of Information and Communication Technology (ICT) provides a productive academic platform for both students and staff of institutions of higher learning. ICT use for educational purposes has enhanced teaching and learning through its dynamic, interactive and engaging academic course content. In application, it…

  11. Internationalization at Home for Counseling Students: Utilizing Technology to Expand Global and Multicultural Horizons

    Science.gov (United States)

    Bhat, Christine Suniti; McMahon, Mary

    2016-01-01

    Advances in information and communications technology have created increased avenues to internationalize educational experiences for students on their home campuses. This article reports on a teaching strategy that used Blackboard to provide an "Internationalization at Home" online exchange experience for Australian and American graduate…

  12. Utilizing Geo-Referenced Mobile Game Technology for Universally Accessible Virtual Geology Field Trips

    Science.gov (United States)

    Bursztyn, Natalie; Pederson, Joel; Shelton, Brett; Walker, Andrew; Campbell, Todd

    2015-01-01

    Declining interest and low persistence is well documented among undergraduate students in Science, Technology, Engineering, and Math in the United States. For geoscience, field trips are important attractors to students, however with high enrollment courses and increasing costs they are becoming rare. We propose in this concept paper that the…

  13. Reading Teachers' Beliefs and Utilization of Computer and Technology: A Case Study

    Science.gov (United States)

    Remetio, Jessica Espinas

    2014-01-01

    Many researchers believe that computers have the ability to help improve the reading skills of students. In an effort to improve the poor reading scores of students on state tests, as well as improve students' overall academic performance, computers and other technologies have been installed in Frozen Bay School classrooms. As the success of these…

  14. Multi-Terabit Long-Haul Transmission System Utilizing Distributed Raman Amplification Technologies

    Institute of Scientific and Technical Information of China (English)

    Takao Naito; Toshiki Tanaka

    2003-01-01

    Here we summarize multi-terabit long-haul transmission experiment and distributed Raman amplification (DRA) technologies. As well, we investigate the configuration of dispersion-managed fibers for the DRA-based system from the viewpoint of the fiber non-linear effect and required pumping power.

  15. Modern Technologies of Manufacturing Nonwovens and Cotton's Realistic Scope of Utilization in Nonwovens

    Science.gov (United States)

    Modern nonwoven manufacturing technologies are broadly classified into the so-called “Dry” and “Wet” production lines. As the names imply, the dry line generally does not involve any liquid and the wet line always involves some kind of liquid, generally water. Further, the manufacturing of nonwovens...

  16. Girls Involved in Real Life Sharing: Utilizing Technology to Support the Emotional Development of Teenaged Girls

    Science.gov (United States)

    Daily, Shaundra B.; Picard, Rosalind W.

    2007-01-01

    This paper describes a new digital technology to support emotional self-awareness and empathy, called G.I.R.L.S (Girls Involved in Real Life Sharing). The system invited users to reflect actively upon and interact with a dialogue about how the story made them feel through the construction of pictorial narratives. In a pilot study with teenage…

  17. Appraisal of the Availability and Utilization of Information and Communication Technology in the Higher Education System

    Science.gov (United States)

    Ogbuozobe, J. E.; Okeke, Emeka Paul

    2014-01-01

    The availability and functionality of Information and Communication Technology (ICT) provides a productive academic platform for both students and staff of institutions of higher learning. ICT use for educational purposes has enhanced teaching and learning through its dynamic, interactive and engaging academic course content. In application, it…

  18. Evaluation of Information and Communication Technology Utilization by Small Holder Banana Farmers in Gatanga District, Kenya

    Science.gov (United States)

    Mwombe, Simon O. L.; Mugivane, Fred I.; Adolwa, Ivan S.; Nderitu, John H.

    2014-01-01

    Purpose: The study was carried out to identify information communication technologies (ICTs) used in production and marketing of bananas, to determine factors influencing intensity of use of ICT tools and to assess whether use of ICT has a significant influence on adoption of tissue culture bananas by small-scale banana farmers in Gatanga…

  19. The other aspect of solar energy utilization. Solar technologies export enhancement: A central European point of view

    Science.gov (United States)

    Winter, C. J.; Nitsch, J.; Klaiss, H.; Voigt, C.

    1985-11-01

    It is shown that solar energy utilization can, on a moderate scale, supplement the indigenous energy supply of the Federal Republic of Germany. It can contribute to the prevention of fatal ecological damage, open an attractive export market and, in the long run, prepare ground for North-South compensation, where energy-poor but technology rich countries cooperate with countries of the Third World, which are often rich in raw materials and are situated in the solar belt of the world, for the benefit of the implementation of a solar industry or the production of a marketable synthetic solar energy carrier.

  20. The impact of array genomic hybridization on mental retardation research: a review of current technologies and their clinical utility.

    Science.gov (United States)

    Zahir, F; Friedman, J M

    2007-10-01

    Our understanding of the causes of mental retardation is benefiting greatly from whole-genome scans to detect submicroscopic pathogenic copy number variants (CNVs) that are undetectable by conventional cytogenetic analysis. The current method of choice for performing whole-genome scans for CNVs is array genomic hybridization (AGH). Several platforms are available for AGH, each with its own strengths and limitations. This review discusses considerations that are relevant to the clinical use of whole-genome AGH platforms for the diagnosis of pathogenic CNVs in children with mental retardation. Whole-genome AGH studies are a maturing technology, but their high diagnostic utility assures their increasing use in clinical genetics.

  1. A COMPARISON OF UNDERGRADUATE FACULTY AND MILLENNIAL STUDENTS REGARDING THE UTILIZATION OF WEBLOG AND PODCAST TECHNOLOGY IN A TEACHER EDUCATION DEPARTMENT

    Directory of Open Access Journals (Sweden)

    Leslie STURDIVANT ENNIS

    2010-01-01

    Full Text Available The main objective of the study was to compare the utilization of weblog and podcast technology by undergraduate university faculty and Millennial college students. The study was conducted to test the hypothesis, formed from existing literature, that there might be a difference in the utilization of weblog and podcast technology between faculty and Millennial students in a Teacher Education Department. Analysis of the data using descriptive statistics revealed that the mean of both populations was similar in their technological utilization.A technology survey was distributed to Millennial college students and undergraduate university faculty in a Teacher Education Department. One hundred surveys were utilized based upon the number of students currently enrolled in Teacher Education classes at the time of the study. Fifty-nine students and five undergraduate faculties participated in the survey. The average age of the student population was twenty-one, with a faculty average of forty-nine. Data were collected and analyzed using descriptive statistics regarding the utilization of weblog and podcast technology by faculty and students. The study refuted the hypothesis that there is a difference in weblog and podcast utilization between faculty and Millennial students. There was no significant difference in the utilization of weblogs and podcasts in the two populations. The results indicate that the perceived technological gap between Millennial students and university faculty is not as prevalent as theorized by the existing literature.

  2. [Utilization of technological resources within the framework of operation of a Mobile Mental Health Unit].

    Science.gov (United States)

    Garoni, D; Sarantidis, D; Katsadoros, K

    2016-01-01

    Telepsychiatry was introduced in the early 1950's for the provision of mental health services from a distance. In 1990 the progress made in telecommunications technologies caused a significant expansion in telepsychiatry services. It can refer to store and forward technologies, interactive technologies, remote monitoring technologies and it is applied to contribute to the lift of restrictions placed on providing mental health services. Restrictions may exist due to geographic isolation, lack of specialized services, high cost of moving patients etc. The positive cost-benefit analysis and the reliability of diagnosis and efficacy of interventions through telepsychiatry have been documented in various research papers referring to a wide range of contexts such as prisons, remote areas, general and psychiatric hospitals. Since 2003 the Mobile Mental Health Unit of South- Eastern (SE) Cyclades has been using videoconferencing in order to provide mental health services in thirteen islands. This area shares many of the characteristics of remote areas such as residential dispersion, lack of mental health services and frequent lack of access to services in urban centers. Telepsychiatry in conjunction with physical presence of professionals was launched by the Mobile Mental Health Unit in order to provide assistance to the evaluation of patients, to therapeutic interventions, to medicine prescription, to crisis intervention, to psychoeducation of patients and their families and to the implementation of educational and administrative activities . The use of existing technology in combination with the development of human resources has enabled continuity of care, crisis intervention and avoidance of involuntary hospitalization for a significant number of persons. Moreover, it has improved cooperation and coordination between the interdisciplinary team and local authorities and agencies. When professionals located in different parts are collaborating via telepsychiatry it is

  3. Near Real-Time Nondestructive Active Inspection Technologies Utilizing Delayed γ-Rays and Neutrons for Advanced Safeguards

    Energy Technology Data Exchange (ETDEWEB)

    Hunt, Alan [Idaho State Univ., Pocatello, ID (United States). Idaho Accelerator Center, Dept. of Physics; Reedy, E. T.E. [Idaho State Univ., Pocatello, ID (United States). Dept. of Phyics, Idaho Accelerator Center; Mozin, V. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Tobin, S. J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Nuclear Nonproliferation

    2015-02-12

    In this two year project, the research team investigated how delayed γ-rays from short-lived fission fragments detected in the short interval between irradiating pulses can be exploited for advanced safeguards technologies. This program contained experimental and modeling efforts. The experimental effort measured the emitted spectra, time histories and correlations of the delayed γ-rays from aqueous solutions and solid targets containing fissionable isotopes. The modeling effort first developed and benchmarked a hybrid Monte Carlo simulation technique based on these experiments. The benchmarked simulations were then extended to other safeguards scenarios, allowing comparisons to other advanced safeguards technologies and to investigate combined techniques. Ultimately, the experiments demonstrated the possible utility of actively induced delayed γ-ray spectroscopy for fissionable material assay.

  4. Exploration Requirements Development Utilizing the Strategy-to-Task-to-Technology Development Approach

    Science.gov (United States)

    Drake, Bret G.; Josten, B. Kent; Monell, Donald W.

    2004-01-01

    The Vision for Space Exploration provides direction for the National Aeronautics and Space Administration to embark on a robust space exploration program that will advance the Nation s scientific, security, and economic interests. This plan calls for a progressive expansion of human capabilities beyond low earth orbit seeking to answer profound scientific and philosophical questions while responding to discoveries along the way. In addition, the Vision articulates the strategy for developing the revolutionary new technologies and capabilities required for the future exploration of the solar system. The National Aeronautics and Space Administration faces new challenges in successfully implementing the Vision. In order to implement a sustained and affordable exploration endeavor it is vital for NASA to do business differently. This paper provides an overview of the strategy-to-task-to-technology process being used by NASA s Exploration Systems Mission Directorate to develop the requirements and system acquisition details necessary for implementing a sustainable exploration vision.

  5. Technologies for Safe Water Supply in Arsenic Affected Villages of Bangladesh Utilizing a Pedal Pump

    Science.gov (United States)

    Biswas, Wahidul K.; Leslie, Greg

    2007-10-01

    This paper presents information on the socio-techno-economic aspects of a water purification system for the arsenic contaminated villages of Bangladesh. The proposed system which is based on hollow fiber membranes and granular activated carbon columns can be used to harvest potable water from ponds without many of the problems inherent in the conventional pond sand filters. This paper also examines the possible application of human operated pedal pump, instead of diesel or electricity driven pump, for pumping water from ponds to overcome limitations in existing water technologies in the arsenic-contaminated villages in Bangladesh. A market model of this technology has been suggested that allows the rural poor to access to safe water at affordable monthly rate.

  6. Application of pilot technologies for energy utilization of agricultural residues in Northern Greece

    Directory of Open Access Journals (Sweden)

    Zabaniotou Anastasia A.

    2007-01-01

    Full Text Available The enormous potential of agro biomass can be exploited to produce sustainable bioenergy. Proper management and further exploitation of this potential could lead to economically profitable approximations and solutions for the agricultural industry and even energy production industry. Gasification in-situ with energy production or pyrolysis of the above mentioned residues, under a non-oxidizing atmosphere for alternative fuels production could be a solution to the environmental problems that land filling or conventional combustion could create. The present work focuses on combustion and pyrolysis of cotton gin residues in Greece, as an alternative way of energy production. The purpose of presentation of a case study of the two alternatives methods (combustion and gasification or pyrolysis, by using cotton ginning waste as biofuel, is to show the appropriateness of new bioenergy sources by coupling them with energy production technologies. These technologies can be applied in northern Greece as well as in other Balkan or Mediterranean countries. .

  7. The earth-coupled heat pump: Utilizing innovative technology in single family rehabilitation strategies

    Energy Technology Data Exchange (ETDEWEB)

    1989-11-01

    The study examines the feasibility of incorporating the use of earth-coupled heat pump technology in single-family housing rehabilitation projects, based on energy conservation attributes and financial considerations. Following evaluation of a theoretical model which indicated that installations of the heat pumps were feasible, the heat pumps were tested under actual conditions in five single family housing units which were part of the Urban Homesteading Program, and were matched with comparable units which did not receive special treatment. Energy consumption information was collected for all units for twelve months. Variables were identified, and the data was analyzed for individual housing units and compared with the results predicted by the theoretical model to determine the practicality of incorporating such technology in large scale rehabilitation projects. 14 refs., 14 figs., 3 tabs.

  8. UTILIZATION OF THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY FIRE DYNAMICS SIMULATION COMPUTER MODEL

    Energy Technology Data Exchange (ETDEWEB)

    L. BARTLEIN

    2001-05-01

    The objective of this report is to provide a methodology for utilization of the NIST FDS code to evaluate the effects of radiant and convective heating from single and multiple fire sources, on heat sensitive targets as Special Nuclear Materials (SNM), and High Explosives (HE). The presentation will demonstrate practical applications of the FDS computer program in fire hazards analysis, and illustrate the advantages over hand calculations for radiant heat and convective transfer and fire progression. The ''visualization'' of radiant and convective heat effects will be demonstrated as a tool for supporting conclusions of fire hazards analysis and TSR development.

  9. Evaluating the barriers for enhacing the utilization level of advanced manufacturing technologies (AMTs) in manufacturing industry

    OpenAIRE

    2014-01-01

    This research has been out within the field of the barriers of advanced manufacturing technology. It has been goal to investigate the barriers affecting the implementation of AMT in the organisation. the work with this paper has been carried out in cooperation with machine well with the goal to create recommendation for the company in how they could implement AMT successfully in the company in order to answer the question what should a small industry focus on to implement the ...

  10. Extended outlook: description, utilization, and daily applications of cloud technology in radiology.

    Science.gov (United States)

    Gerard, Perry; Kapadia, Neil; Chang, Patricia T; Acharya, Jay; Seiler, Michael; Lefkovitz, Zvi

    2013-12-01

    The purpose of this article is to discuss the concept of cloud technology, its role in medical applications and radiology, the role of the radiologist in using and accessing these vast resources of information, and privacy concerns and HIPAA compliance strategies. Cloud computing is the delivery of shared resources, software, and information to computers and other devices as a metered service. This technology has a promising role in the sharing of patient medical information and appears to be particularly suited for application in radiology, given the field's inherent need for storage and access to large amounts of data. The radiology cloud has significant strengths, such as providing centralized storage and access, reducing unnecessary repeat radiologic studies, and potentially allowing radiologic second opinions more easily. There are significant cost advantages to cloud computing because of a decreased need for infrastructure and equipment by the institution. Private clouds may be used to ensure secure storage of data and compliance with HIPAA. In choosing a cloud service, there are important aspects, such as disaster recovery plans, uptime, and security audits, that must be considered. Given that the field of radiology has become almost exclusively digital in recent years, the future of secure storage and easy access to imaging studies lies within cloud computing technology.

  11. 75 FR 57293 - Certain Festive Articles: Recommendations for Modifying the Harmonized Tariff Schedule of the...

    Science.gov (United States)

    2010-09-20

    ... investigation and opportunity to present written views on proposed recommendations. SUMMARY: Following receipt... of the Harmonized Tariff Schedule of the United States (HTS) relating to certain utilitarian articles... filing written views relating to the Commission's proposed recommendations. November 29,...

  12. Assessing DRG cost accounting with respect to resource allocation and tariff calculation: the case of Germany

    National Research Council Canada - National Science Library

    Vogl, Matthias

    2012-01-01

    The purpose of this paper is to analyze the German diagnosis related groups (G-DRG) cost accounting scheme by assessing its resource allocation at hospital level and its tariff calculation at national level...

  13. Open Access Transmission Tariff: Effective December 18, 1998 (Revised June 16, 1999).

    Energy Technology Data Exchange (ETDEWEB)

    United States. Bonneville Power Administration.

    1999-06-16

    Bonneville will provide Network Integration Transmission Service pursuant to the terms and conditions contained in this Tariff and Service Agreement. The service that Bonneville will provide under this Tariff allows a Transmission Customer to integrate, economically dispatch and regulate its current and planned Network Resources to serve its Network Load. Network Integration Transmission Service also may be used by the Transmission Customer to deliver nonfirm energy purchases to its Network Load without additional charge. To the extent that the transmission path for moving power from a Network Resource to a Network Load includes the Eastern and Southern Interties, the terms and conditions for service over such intertie facilities are provided under Part 2 of this Tariff. Also, transmission service for third-party sales which are not designated as Network Load will be provided under Bonneville's Point-to-Point Transmission Service (Part 2 of this Tariff).

  14. Does achieving the best practice tariff improve outcomes in hip fracture patients? An observational cohort study

    National Research Council Canada - National Science Library

    Oakley, B; Nightingale, J; Moran, CG; Moppett, IK

    2017-01-01

      Objectives To determine if the introduction of the best practice tariff (BPT) has improved survival of the elderly hip fracture population, or if achieving BPT results in improved survival for an individual...

  15. Welfare Effects of Tariff Peak Conversion: The Case of Monopolistic Competition

    DEFF Research Database (Denmark)

    Schröder, Philipp; Jørgensen, Jan Guldager

    WTO negotiations have introduced formula approaches to reduce protection and improve market access. It has been argued that formula approaches are needed even more in current and future negotiations to secure success due to the large number of countries involved in the negotiations, the wider dis...... tariffs are analyzed. It is established that reduction in the trade restriction using three formulas proposed in the literature i) a proportional cut, ii) the Swiss formula and iii) a compression formula leads to non-trivial impacts on the welfare....... dispersion in initial tariffs (tariff peaks) and gaps between bound and applied tariff rates. This paper presents a general equilibrium model with monopolistic competition to examine the welfare effects of different formulas in a process of improving market access. Products with initially high and low...

  16. Evaluating the barriers for enhacing the utilization level of advanced manufacturing technologies (AMTs in manufacturing industry

    Directory of Open Access Journals (Sweden)

    Preetam singh sankhla

    2014-10-01

    Full Text Available This research has been out within the field of the barriers of advanced manufacturing technology. It has been goal to investigate the barriers affecting the implementation of AMT in the organisation. the work with this paper has been carried out in cooperation with machine well with the goal to create recommendation for the company in how they could implement AMT successfully in the company in order to answer the question what should a small industry focus on to implement the AMT concept successfully, an investigation in the two middle size industries in the Rajasthan (India were visited. One interview was carried out with managers at both the two companies and a questionnaire was handed out to workers. The aim was to see if there were any large differences in the barriers of AMT which is applying in the company. The interview and questionnaire did show that a company should know about barriers of AMT & their inter relationship if they wanted to accomplish more in the organisation with tea work and get more busy from the employees. It is important that all workers know the vision and goal why a company is implementing AMT. Advanced manufacturing technology (AMT has been viewed strategic weapon to gain competitive advantages by manufacturing organisation . The small and medium scale industries (SMISs are under increasing pressure to adopt advanced manufacturing technology to be competitive or simply to survive. The successful implementation of AMT will requires the companies to have a workforce with higher level of skills, a flexible organizational structure and include a new culture in managing and training a workforce in the manufacturing industries. The ability of the workers to run multiple machines, stopping production when problem occur, communication of organizational goals and participation in idea generation and decision making are important in achieving a higher benefits of AMT. The SMIs have to increase the educational and supervision

  17. The analysis of Taiwan's residential electricity demand under the electricity tariff policy

    Science.gov (United States)

    Chen, Po-Jui

    In October 2013, the Taiwan Power Company (Taipower), the monopolized state utility service in Taiwan, implemented an electricity tariff adjustment policy to reduce residential electricity demand. Using bi-monthly billing data from 6,932 electricity consumers, this study examine how consumers respond to an increase in electricity prices. This study employs an empirical approach that takes advantage of quasi-random variation over a period of time when household bills were affected by a change in electricity price. The study found that this price increase caused a 1.78% decline in residential electricity consumption, implying a price elasticity of -0.19 for summer-season months and -0.15 for non-summer-season months. The demand for electricity is therefore relatively inelastic, likely because it is hard for people to change their electricity consumption behavior in the short-term. The results of this study highlight that demand-side management cannot be the only lever used to address Taiwan's forecasted decrease in electricity supply.

  18. Welfare effects of unilateral changes in tariffs: the case of Motor vehicles and parts in Australia

    OpenAIRE

    Peter B. Dixon; Maureen T. Rimmer

    2008-01-01

    We derive formulas for the optimal tariff rate in four theoretical models. We start with a model in which industries are competitive and then successively allow for: monopoly pricing by export industries; revenue-replacement costs; and cold-shower effects. The theoretical formulas accurately explain results from MONASH, a detailed CGE model. A critical parameter in determining the optimal tariff is the export-demand elasticity. Modellers are often reluctant to adopt empirically justifiable va...

  19. Tariffs, Employment and the Current Account: Real Wage Resistance and the Macroeconomics of Protectionism

    OpenAIRE

    Sweder van Wijnbergen

    1987-01-01

    Using a standard complete specialization model of a small open economy within a rigorous intertemporal optimization framework with contract- based wage rigidity, we show that permanent tariffs may lead to a current account deterioration and a fall in employment, contradicting most of the literature of macro-economic effects of import tariffs. I show that this will always be the case if the economy is small enough. The crucial factor in this complete reversal of standard results is the impact ...

  20. Implications of WTO Tariff Reductions for EU and US Dairy Policy

    OpenAIRE

    Pajic, Mirjana; Blandford, David; Bailey, Kenneth W.

    2009-01-01

    The objective of this study is to measure the impact of proposed Doha Round tariff reductions on the global dairy industry and dairy policy. We examine how proposed tariff reductions affect global trade and prices, and the implications for the European Union and the United States. Since international market conditions can vary, we examine the implications of liberalization under two sets of market conditions. The first corresponds to the year 2004 in which there was a global surplus of dairy ...

  1. Prospective Teachers’ Tendencies to Utilize From the Facilities of Contemporary Educational Technology

    Directory of Open Access Journals (Sweden)

    Gizem SAYGILI

    2016-07-01

    Full Text Available In terms of effectiveness and efficiency, it is important to determine the views of prospective teachers related to taking advantage of the facilities of contemporary educational technology. This study which aims to identify prospective teachers’ attitudes towards computer-assisted learning was conducted with 140 prospective teachers (86 female, 54 male who have been attending pedagogical formation education at Süleyman Demirel University in the 2013 academic year. In this study, in eight different fields of prospective teachers' attitudes towards computer assisted education were examined with different variables such as gender, major and graduation year. As a data collection tool, the "Computer Assisted Education Attitude Scale" was used in order to determine the tendencies of prospective teachers towards the use of computer-assisted learning in different fields such as physical sciences, social sciences, health sciences, fine arts, theology, mathematics and Turkish language. In the statistical analysis, frequency analysis, descriptive statistics, nonparametric statistical technics were used. As a result of the analysis it was identified that teachers participating our study exhibited substandard attitudes towards computer-assisted education. In computer-assisted education, female prospective teachers had higher attitude level than men prospective teachers. In addition, attitude scores of participants of mathematics, health sciences, fine arts and science was higher than the participants of the Turkish language, foreign languages, social sciences and theology departments. There were statistically significant difference between attitude scores of participants of different disciplines. Results of the research findings are expected to contribute to the widespread use of instructional technology, and are expected to lead to applications in other fields.Keywords: Teaching Profession, Education, Technology, Computer-Assisted Education, Attitude

  2. Optimal utilization of modern reproductive technologies to maximize the gross margin of milk production.

    Science.gov (United States)

    Heikkilä, A-M; Peippo, J

    2012-06-01

    In this study, a linear programming model was developed to maximize the gross margin of milk production by determining the optimal use of different reproductive technologies in a dairy herd. The model has the potential to vary the use of conventional artificial insemination, insemination with X-sorted sperm, and the use of unselected or sex-selected embryo recovery and transfer. Data from Finnish dairy herd recording systems were used to parameterize the model. This paper presents the results of 6 scenarios for a herd size of 60 dairy cows. In the basic scenario, the optimum economic combination for Finnish conditions was to inseminate 10 heifers and 22 cows with unsorted semen, 8 heifers with X-sorted sperm, and to use 20 cows as embryo donors which was the upper constraint for this technique. The embryo donors were inseminated with conventional semen for both embryo production and their subsequent pregnancy. Without restriction on embryo recovery, the optimum combination was to use all heifers as donors of sex-selected embryos and all cows as donors of unselected embryos. It was more profitable to produce female embryos with X-sorted sperm than by sorting embryos. Embryo recipients were not economically justified in any scenario. In practice, the optimal strategy is herd-specific depending on the input costs, output values and the technical success of each reproductive technology in that herd. This single-year linear programming model adequately differentiates between breeding technologies within a herd, but further research is needed to develop dynamic models to consider genetic improvement and herd expansion. Copyright © 2012 Elsevier B.V. All rights reserved.

  3. Utilization of TALEN and CRISPR/Cas9 technologies for gene targeting and modification.

    Science.gov (United States)

    Pu, Jiali; Frescas, David; Zhang, Baorong; Feng, Jian

    2015-08-01

    The capability to modify the genome precisely and efficiently offers an extremely useful tool for biomedical research. Recent developments in genome editing technologies such as transcription activator-like effector nuclease and the clustered regularly interspaced short palindromic repeats system have made genome modification available for a number of organisms with relative ease. Here, we introduce these genome editing techniques, compare and contrast each technical approach and discuss their potential to study the underlying mechanisms of human disease using patient-derived induced pluripotent stem cells.

  4. Conceptual and Empirical Themes regarding the Design of Technology Transfer Programs: A Review of Wood Utilization Research in the United States

    OpenAIRE

    Ellefson, Paul V.; Kilgore, Michael A.; Skog, Kenneth E.; Risbrudt, Christopher D.

    2011-01-01

    Transfer of technologies produced by research is critical to innovation within all organizations. The intent of this paper is to take stock of the conceptual underpinnings of technology transfer processes as they relate to wood utilization research and to identify conditions that promote the successful transfer of research results. Conceptually, research utilization can be viewed from multiple perspectives, including the haphazard diffusion of knowledge in response to vague and imprecise dema...

  5. The electric tariff in the residential sector; Tarificacion electrica en el sector residencial

    Energy Technology Data Exchange (ETDEWEB)

    Sheinbaum Pardo, Claudia [Instituto de Ingenieria, Universidad Nacional Autonoma de Mexico (UNAM), Mexico, D. F. (Mexico)

    1997-12-31

    The main objective of this paper is to make an historical revision and analyze the current condition of the electric tariffs in the Mexican residential sector and ask ourselves if the equalization of tariffs generates the possibility that the entire population has access to the electricity service. The document is divided into three parts. The first one presents the history and the tendencies of the tariffs in the domestic sector in Mexico since 1973 until 1996 and the current tariff structure. The second one describes the characteristics of the residential users and mention is made of how the increment of the electric tariffs would affect the various population sectors. The last part of this paper presents some tariff criteria, that take into account energy conservation measures [Espanol] El objetivo principal de este trabajo es hacer una revision historica y analizar la situacion actual de las tarifas electricas en el sector residencial mexicano y preguntarnos si la igualdad de tarifas genera la posibilidad de que toda la poblacion tenga acceso al servicio electrico. El documento se divide en tres partes. La primera presenta la historia y tendencias de las tarifas del sector domestico en Mexico desde 1973 hasta 1996 y la estructura tarifaria actual. La segunda describe las caracteristicas de los usuarios residenciales y se menciona como afectaria el incremento de las tarifas electricas a los distintos sectores de la poblacion. La ultima parte de este trabajo presenta algunos criterios de tarificacion, que toman en cuenta medidas de ahorro de energia

  6. UTILITY ADVANCED TURBINE SYSTEMS (ATS) TECHNOLOGY READINESS TESTING: PHASE 3R

    Energy Technology Data Exchange (ETDEWEB)

    None

    1999-09-01

    The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the US Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed, including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially by GE. This change has resulted from DOE's request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include full speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown. This report summarizes work accomplished in 2Q99.

  7. Utility advanced turbine systems (ATS) technology readiness testing. Technical progress report, January 1--March 31, 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-08-01

    The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the US Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially by GE. This change has resulted from DOE`s request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include full speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. This report summarizes work accomplished in 1Q98.

  8. Intelligent systems technologies to assist in utilization of Earth observation data

    Science.gov (United States)

    Ramapriyan, Hampapuram K.; McConaughy, Gail R.; Morse, Stephen; Isaac, David

    2004-10-01

    With the launch of several Earth observing satellites over the last decade, we are now in a "data rich" environment. From NASA's Earth Observing System (EOS) satellites alone, we are accumulating more than 3.5 TB per day of raw data and derived geophysical parameters. The data products are being distributed to a large user community that in-cludes scientific researchers, educators and operational government agencies. Notable progress has been made in the last decade in facilitating access to data. However, to realize the full potential of the growing archives of valuable scien-tific data, further progress is necessary in the transformation of data into information, and information into knowledge that can be used in particular applications. This paper discusses the concept of an Intelligent Archive in the context of a Knowledge Building system (IA-KBS), with six key capabilities: Virtual Product Generation, Significant Event Detec-tion, Automated Data Quality Assessment, Large-Scale Data Mining, Dynamic Feedback Loop, and Data Discovery and Efficient Requesting. Technologies enabling these capabilities are identified. Many of these technologies are in development today by NSF, NASA and industry sponsorship. These can be taken advantage of for evolving the current generation of data and information systems into the visionary IA-KBS.

  9. Analysis of carbon mitigation policies. Feed-in tariffs, energy and carbon price interactions and competitive distortions on carbon markets

    Energy Technology Data Exchange (ETDEWEB)

    Reichenbach, Johanna

    2011-07-19

    I study several policy instruments for carbon mitigation with a focus on subsidies for renewable energies, emission taxes and emission allowances. In Chapter 1, I analyze the optimal design and the welfare implications of two policies consisting of an emission tax for conventional fossil-fuel utilities combined with a subsidy for the producers of renewable energy equipment and an emission tax combined with a feed-in tariff for renewable electricity. In Chapter 2 I study the empirical interrelationships between European emission allowance prices and prices for electricity, hard coal and natural gas with an application to portfolio allocation. In Chapters 3 and 4, I discuss several policy-related issues of emissions trading, in particular the potential for market manipulations by firms holding a dominant position in the emission market, the output market or both, and competitive distortions and leakage due to unequal emission regulations across industries, sectors, regions, or countries. (orig.)

  10. A technology development for the purification and utilization of rare metals

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-01

    Current domestic market appears not to be sufficient enough for the large scale investment for the expensive vacuum-melting equipment. Besides, related ingot-processing technologies like rolling, extrusion, and forging of titanium should be prepared in advance. In the mean time, the attempt to recycle expensive titanium scraps produced in our nation would be worthwhile in view of the reduction of import from foreign countries and of saving valuable secondary resources. The objectives for this research are two fold: One is to develop technology for the production of high purity titanium metals from sponges and scraps and to extend the developed technology to industrial applications. The other is to develop a multipurpose inductively-coupled plasma enhanced-surface modification (ICPESM) process to upgrade powder products. Followings are the main results of the study. First, PREP(Plasma-Rotating-Electrode Process) and HDP(Hydride-Dehydride Process) were adopted to evaluate the possibility of using domestic titanium scraps in the production of pure titanium powders. Those scraps were titanium pipes of Grade 2 and various sputtering targets having a purity of 99.995%. The titanium powders produced by both methods were examined and compared with conventionally prepared ones. Their shape, size distribution, structure and above of all major impurities were determine to evaluate these process. Stable plasma was obtained by the impedance harmonization between plasma generator and matching networks maintaining the reflected power at near zero. The chamber vacuum went down to 10{sup -3} torr offering no difficulties to maintain 1.0 torr at which the present experiments were conducted. However, the fluidization in the chamber was unstable when operated in vacuum. The gas distributor and chamber design may need modifications. Argon plasma treatment on the titanium powders changed the surface morphology slightly even though the effect was not significant due possibly to the short

  11. Payload influences on technology development and utilization of the Space Shuttle extravehicular mobility unit

    Science.gov (United States)

    Patrick, J. W.; Kraly, E. F.

    1976-01-01

    Historical EVA approaches are examined. The considered data emphasize the overall importance of EVA for Shuttle payload operations. Twenty requirement categories related to crew protection, crew performance, and payload protection are listed in a table. Attention is given to a preliminary assessment of payload related requirements, an evaluation of the natural thermal environment in the case of the Shuttle orbiter bay, and the ability of the extravehicular mobility unit (EMU) to protect the crewman from induced or natural radiation as found in the Van Allen radiation belt South Atlantic anomaly. On the basis of the evaluation it appears very likely that design improvements alone can make the EMU meet payload requirements without requiring significant technology advances.

  12. Improved Approach for Utilization of FPGA Technology into DAQ, DSP, and Computing Applications

    Energy Technology Data Exchange (ETDEWEB)

    Isenhower, Larry Donald

    2009-01-28

    Innovation Partners proposed and successfully demonstrated in this SBIR Phase I grant a software/hardware co-design approach to reduce both the difficulty and time to implement Field Programmable Gate Array (FPGA) solutions to data acquisition and specialized computational applications. FPGAs can require excessive time for programming and require specialized knowledge that will be greatly reduced by the company's solution. Not only are FPGAs ideal for DAQ and embedded solutions, they can also be the best solution to specialized signal processing to replace Digital Signal Processors (DSPs). By allowing FPGA programming to be done in C with the equivalent of a simple compilation, algorithm changes and improvements can be implemented decreasing the life-cycle costs and allow subsitution of new FPGA designs staying above the technological details.

  13. Energy-technological method for utilization of coal of the Kansko-Achinskii basin

    Science.gov (United States)

    Islamov, S. R.

    2013-11-01

    The state of the market segments connected with coal fuel consumption is estimated. As a whole it is characterized by the shortage of high-calorific coals for special purposes and the excess of offerings of low-rank coals. The classic method for firing coal has substantially exhausted its potential and is not in the condition to meet the ever increasing needs of power efficiency and environmental safety. For resolution of the existing situation the author proposes to use the technology of internal partial coal gasification with the parallel production of heat energy and brown-coal coke. Scopes of new products are briefly described with the prevailing orientation on the replacement of classic coke in metallurgy.

  14. The sensitivity of wind technology utilization to cost and market parameters

    Energy Technology Data Exchange (ETDEWEB)

    Dodd, H.M. (Sandia National Labs., Albuquerque, NM (USA)); Hock, S.M.; Thresher, R.W. (Solar Energy Research Inst., Golden, CO (USA))

    1990-11-01

    This study explores the sensitivity of future wind energy market penetration to available wind resources, wind system costs, and competing energy system fuel costs for several possible energy market evolution scenarios. The methodology for the modeling is described in general terms. Cost curves for wind technology evolution are presented and used in conjunction with wind resource estimates and energy market projections to estimate wind penetration into the market. Results are presented that show the sensitivity of the growth of wind energy use to key cost parameters and to some of the underlying modeling assumptions. In interpreting the results, the authors place particular emphasis on the relative influence of the parameters studied. 4 refs., 8 figs., 1 tab.

  15. ECUT: Energy Conversion and Utilization Technologies program. Heterogeneous catalysis modeling program concept

    Science.gov (United States)

    Voecks, G. E.

    1983-01-01

    Insufficient theoretical definition of heterogeneous catalysts is the major difficulty confronting industrial suppliers who seek catalyst systems which are more active, selective, and stable than those currently available. In contrast, progress was made in tailoring homogeneous catalysts to specific reactions because more is known about the reaction intermediates promoted and/or stabilized by these catalysts during the course of reaction. However, modeling heterogeneous catalysts on a microscopic scale requires compiling and verifying complex information on reaction intermediates and pathways. This can be achieved by adapting homogeneous catalyzed reaction intermediate species, applying theoretical quantum chemistry and computer technology, and developing a better understanding of heterogeneous catalyst system environments. Research in microscopic reaction modeling is now at a stage where computer modeling, supported by physical experimental verification, could provide information about the dynamics of the reactions that will lead to designing supported catalysts with improved selectivity and stability.

  16. Utilizing GIS Technology to Improve Fire Prevention Activities in an Urban Fire Department.

    Science.gov (United States)

    Shields, Wendy C; Shields, Timothy M; McDonald, Eileen M; Perry, Elise C; Hanna, Peter; Gielen, Andrea C

    2015-01-01

    The Baltimore City Fire Department (BCFD) has been installing smoke alarms city wide for more than three decades. Though data on each visit are entered into a database, no system existed for using these data for planning or evaluation. The objective of this study is to use Geographic Information System (GIS) technology and existing databases to 1) determine the number of residences in need of a home visit; 2) determine total visits, visits per household, and number of homes entered for eligible households; and 3) demonstrate integration of various data via GIS for use in prevention planning. The tax assessment database was queried to determine the number of eligible (as determined by BCFD policy) residences in need of a visit. Each attempted BCFD home visit was coded to identify, if the BCFD personnel interacted with residents ("pass door") and installed alarms. Home visits were geocoded and compared to the tax assessment database to determine city wide pass door rates. Frequency of visits was run by individual residences to measure efficiency. A total of 206,850 residences met BCFD eligibility for a home visit. In 2007, the BCFD attempted 181,757 home visits and 177,213 were successfully geocoded to 122,118 addresses. A total of 122,118 eligible residences (59%) received a home visit. A total of 35,317 residences (29%) received a repeat visit attempt. The pass door rate was 22% (46,429) of all residences. GIS technology offers a promising means for fire departments to plan and evaluate the fire prevention services they provide.

  17. Utilizing semantic Wiki technology for intelligence analysis at the tactical edge

    Science.gov (United States)

    Little, Eric

    2014-05-01

    Challenges exist for intelligence analysts to efficiently and accurately process large amounts of data collected from a myriad of available data sources. These challenges are even more evident for analysts who must operate within small military units at the tactical edge. In such environments, decisions must be made quickly without guaranteed access to the kinds of large-scale data sources available to analysts working at intelligence agencies. Improved technologies must be provided to analysts at the tactical edge to make informed, reliable decisions, since this is often a critical collection point for important intelligence data. To aid tactical edge users, new types of intelligent, automated technology interfaces are required to allow them to rapidly explore information associated with the intersection of hard and soft data fusion, such as multi-INT signals, semantic models, social network data, and natural language processing of text. Abilities to fuse these types of data is paramount to providing decision superiority. For these types of applications, we have developed BLADE. BLADE allows users to dynamically add, delete and link data via a semantic wiki, allowing for improved interaction between different users. Analysts can see information updates in near-real-time due to a common underlying set of semantic models operating within a triple store that allows for updates on related data points from independent users tracking different items (persons, events, locations, organizations, etc.). The wiki can capture pictures, videos and related information. New information added directly to pages is automatically updated in the triple store and its provenance and pedigree is tracked over time, making that data more trustworthy and easily integrated with other users' pages.

  18. The transient regulated tariff of the electricity market adjustment called 'return tariff'; Le tarif reglemente transitoire d'ajustement du marche de l'electricite dit 'tarif de retour'

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-01-15

    The transient electricity regulated tariff was implemented by the law of the 7 december 2006 relative to the energy sector. It offers an adapted response to the enterprises confronted with the electricity prices increase. The document details this regulated tariff, provides the corresponding order of the 3 january 2007 and an interpretative note on the implementation of the transient regulated tariff. (A.L.B.)

  19. Development of beam utilization and application technology - Development of KOMAC user program

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kang Ok; Heo, Jin Young [Korea Accelerator and Plasma Association, Seoul (Korea); Chung, Kie Hyung; Nam, Yong Un [Seoul National University, Seoul (Korea); Noh, Seung Jung [Dankook University, Seoul (Korea)

    1999-04-01

    To develop cooperations for the construction of the KOMAC (Korea Multi-purpose Accelerator Complex) and to maximize the operation efficiency and rate, foreign user programs for large accelerator facilities, which are well organized and already settled down as a result of many year's or decades' operation experience, were surveyed and the user related status of the KOMAC class accelerators under construction was also surveyed. The survey was conducted through conference attendances, visits, interviews, seminar openings, or internet searches. In addition, the utilization as well as application areas of the KOMAC are categorized and four surveys of user's requests and markets were conducted via e-mails, mails, telephones, or visits. An internet home page and seminars for the KOMAC user program were provided. As results, lots of accelerator relate person and even publics could join or get acquainted with the KOMAC program. The research potential area for the KOMAC of near future was suggested and provided through the analysis of collected data and informations. (author). 38 figs., 19 tabs.

  20. Mid-infrared quantum dot emitters utilizing planar photonic crystal technology.

    Energy Technology Data Exchange (ETDEWEB)

    Subramania,Ganapathi Subramanian; Lyo, Sungkwun Kenneth; Cederberg, Jeffrey George; Passmore, Brandon Scott; El-Kady, Ihab Fathy; Shaner, Eric Arthur

    2008-09-01

    The three-dimensional confinement inherent in InAs self-assembled quantum dots (SAQDs) yields vastly different optical properties compared to one-dimensionally confined quantum well systems. Intersubband transitions in quantum dots can emit light normal to the growth surface, whereas transitions in quantum wells emit only parallel to the surface. This is a key difference that can be exploited to create a variety of quantum dot devices that have no quantum well analog. Two significant problems limit the utilization of the beneficial features of SAQDs as mid-infrared emitters. One is the lack of understanding concerning how to electrically inject carriers into electronic states that allow optical transitions to occur efficiently. Engineering of an injector stage leading into the dot can provide current injection into an upper dot state; however, to increase the likelihood of an optical transition, the lower dot states must be emptied faster than upper states are occupied. The second issue is that SAQDs have significant inhomogeneous broadening due to the random size distribution. While this may not be a problem in the long term, this issue can be circumvented by using planar photonic crystal or plasmonic approaches to provide wavelength selectivity or other useful functionality.

  1. Assessing the utility of geospatial technologies to investigate environmental change within lake systems.

    Science.gov (United States)

    Politi, Eirini; Rowan, John S; Cutler, Mark E J

    2016-02-01

    Over 50% of the world's population live within 3 km of rivers and lakes highlighting the on-going importance of freshwater resources to human health and societal well-being. Whilst covering c. 3.5% of the Earth's non-glaciated land mass, trends in the environmental quality of the world's standing waters (natural lakes and reservoirs) are poorly understood, at least in comparison with rivers, and so evaluation of their current condition and sensitivity to change are global priorities. Here it is argued that a geospatial approach harnessing existing global datasets, along with new generation remote sensing products, offers the basis to characterise trajectories of change in lake properties e.g., water quality, physical structure, hydrological regime and ecological behaviour. This approach furthermore provides the evidence base to understand the relative importance of climatic forcing and/or changing catchment processes, e.g. land cover and soil moisture data, which coupled with climate data provide the basis to model regional water balance and runoff estimates over time. Using examples derived primarily from the Danube Basin but also other parts of the World, we demonstrate the power of the approach and its utility to assess the sensitivity of lake systems to environmental change, and hence better manage these key resources in the future.

  2. Recent advances in utilizing transcription factors to improve plant abiotic stress tolerance by transgenic technology

    Directory of Open Access Journals (Sweden)

    Hongyan eWang

    2016-02-01

    Full Text Available Agricultural production and quality are adversely affected by various abiotic stresses worldwide and this will be exacerbated by the deterioration of global climate. To feed a growing world population, it is very urgent to breed stress-tolerant crops with higher yields and improved qualities against multiple environmental stresses. Since conventional breeding approaches had marginal success due to the complexity of stress tolerance traits, the transgenic approach is now being popularly used to breed stress-tolerant crops. So identifying and characterizing the the critical genes involved in plant stress responses is an essential prerequisite for engineering stress-tolerant crops. Far beyond the manipulation of single functional gene, engineering certain regulatory genes has emerged as an effective strategy now for controlling the expression of many stress-responsive genes. Transcription factors (TFs are good candidates for genetic engineering to breed stress-tolerant crop because of their role as master regulators of many stress-responsive genes. Many TFs belonging to families AP2/EREBP, MYB, WRKY, NAC, bZIP have been found to be involved in various abiotic stresses and some TF genes have also been engineered to improve stress tolerance in model and crop plants. In this review, we take five large families of TFs as examples and review the recent progress of TFs involved in plant abiotic stress responses and their potential utilization to improve multiple stress tolerance of crops in the field conditions.

  3. Development of beam utilization and application technology - Development of KOMAC user program

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kang Ok; Heo, Jin Young [Korea Accelerator and Plasma Association, Seoul (Korea); Chung, Kie Hyung; Nam, Yong Un [Seoul National University, Seoul (Korea); Noh, Seung Jung [Dankook University, Seoul (Korea)

    1999-04-01

    To develop cooperations for the construction of the KOMAC (Korea Multi-purpose Accelerator Complex) and to maximize the operation efficiency and rate, foreign user programs for large accelerator facilities, which are well organized and already settled down as a result of many year's or decades' operation experience, were surveyed and the user related status of the KOMAC class accelerators under construction was also surveyed. The survey was conducted through conference attendances, visits, interviews, seminar openings, or internet searches. In addition, the utilization as well as application areas of the KOMAC are categorized and four surveys of user's requests and markets were conducted via e-mails, mails, telephones, or visits. An internet home page and seminars for the KOMAC user program were provided. As results, lots of accelerator relate person and even publics could join or get acquainted with the KOMAC program. The research potential area for the KOMAC of near future was suggested and provided through the analysis of collected data and informations. (author). 38 figs., 19 tabs.

  4. Long-range high-speed visible light communication system over 100-m outdoor transmission utilizing receiver diversity technology

    Science.gov (United States)

    Wang, Yiguang; Huang, Xingxing; Shi, Jianyang; Wang, Yuan-quan; Chi, Nan

    2016-05-01

    Visible light communication (VLC) has no doubt become a promising candidate for future wireless communications due to the increasing trends in the usage of light-emitting diodes (LEDs). In addition to indoor high-speed wireless access and positioning applications, VLC usage in outdoor scenarios, such as vehicle networks and intelligent transportation systems, are also attracting significant interest. However, the complex outdoor environment and ambient noise are the key challenges for long-range high-speed VLC outdoor applications. To improve system performance and transmission distance, we propose to use receiver diversity technology in an outdoor VLC system. Maximal ratio combining-based receiver diversity technology is utilized in two receivers to achieve the maximal signal-to-noise ratio. A 400-Mb/s VLC transmission using a phosphor-based white LED and a 1-Gb/s wavelength division multiplexing VLC transmission using a red-green-blue LED are both successfully achieved over a 100-m outdoor distance with the bit error rate below the 7% forward error correction limit of 3.8×10-3. To the best of our knowledge, this is the highest data rate at 100-m outdoor VLC transmission ever achieved. The experimental results clearly prove the benefit and feasibility of receiver diversity technology for long-range high-speed outdoor VLC systems.

  5. European industrial policy as a non-tariff barrier

    Directory of Open Access Journals (Sweden)

    Gilberto Sarfati

    1998-05-01

    Full Text Available This article explores the contradictions between the EU and EU national states industrial policies and the Single Market program of elimination of NTBs (non-tariff barriers. The scope of NTBs connected to European industrial policy is divided into two spheres: the first are barriers on the level of Member States and the second are barriers on the EU level. On the national level, after the 1992 programme, the EU Member States continued to adopt many technical national regulations. On the EU level measures such as new standards, environment and anti-dumping rules, as well as Community expenditures in the different funds constitute new NTBs. Moreover, external competitors have to face other NTBs, such as VERs (Voluntary export restrictions, biased rules on public procurement, ecolabeling, and limitations on ownership, among other barriers. In this essay I demonstrate that the EU and the European national states run an active, unofficial industrial policy that distort the internal and external competition. The paper concludes that the EU industrial policy is not harmonized with the Single Market.

  6. Innovative Feed-In Tariff Designs that Limit Policy Costs

    Energy Technology Data Exchange (ETDEWEB)

    Kreycik, C.; Couture, T. D.; Cory, K. S.

    2011-06-01

    Feed-in tariffs (FITs) are the most prevalent renewable energy policy used globally to date, and there are many benefits to the certainty offered in the marketplace to reduce development risks and associated financing costs and to grow the renewable energy industry. However, concerns over escalating costs in jurisdictions with FIT policies have led to increased attention on cost control in renewable energy policy design. In recent years, policy mechanisms for containing FIT costs have become more refined, allowing policymakers to exert greater control on policy outcomes and on the resulting costs to ratepayers. As policymakers and regulators in the United States begin to explore the use of FITs, careful consideration must be given to the ways in which policy design can be used to balance the policies' advantages while bounding its costs. This report explores mechanisms that policymakers have implemented to limit FIT policy costs. If designed clearly and transparently, such mechanisms can align policymaker and market expectations for project deployment. Three different policy tools are evaluated: (1) caps, (2) payment level adjustment mechanisms, and (3) auction-based designs. The report employs case studies to explore the strengths and weaknesses of these three cost containment tools. These tools are then evaluated with a set of criteria including predictability for policymakers and the marketplace and the potential for unintended consequences.

  7. Research and development of utilization technology of solar thermal energy system for industrial and other use. International joint technology development for solar energy utilization systems; Sangyoyo nado solar system jitsuyoka gijutsu kaihatsu. Taiyo energy riyo system kokusai kyodo gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Takita, M. [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    Described herein are the results of the FY1994 research program for international joint technology development for solar energy utilization systems. The joint study with an Indonesian research institute takes a model of lumber drying plant for the design and feasibility study. All the parts it needs are technically available in Indonesia, except carbon fiber sheets and electronic devices for controlling purposes. The drying cost is higher than that of a plant which procures charge-free wood fuel, but lower than that of a plant which procures fuel at 30$/t. A cacao drying plant model is also studied. The feasibility study shows that the initial investment for the blowing-up model is much higher by 60% to 100% than that for the conventional plant. Its fuel cost is lower by 11% than that of residual oil but 27% higher than that of wood. 4 figs.

  8. Smartphone viewing distance and sleep: an experimental study utilizing motion capture technology

    Science.gov (United States)

    Yoshimura, Michitaka; Kitazawa, Momoko; Maeda, Yasuhiro; Mimura, Masaru; Tsubota, Kazuo; Kishimoto, Taishiro

    2017-01-01

    There are studies reporting the negative impact of smartphone utilization on sleep. It is considered that reduction of melatonin secretion under the blue light exposure from smart-phone displays is one of the causes. The viewing distance may cause sleep disturbance, because the viewing distance determines the screen illuminance and/or asthenopia. However, to date, there has been no study closely investigating the impact of viewing distance on sleep; therefore, we sought to determine the relationship between smartphone viewing distance and subjective sleep status. Twenty-three nursing students (mean age ± standard deviation of 19.7±3.1 years) participated in the study. Subjective sleep status was assessed using the Pittsburgh Sleep Quality Index, morningness–eveningness questionnaire, and the Epworth sleepiness scale. We used the distance between the head and the hand while holding a smartphone to measure the viewing distance while using smartphones in sitting and lying positions. The distance was calculated using the three-dimensional coordinates obtained by a noncontact motion-sensing device. The viewing distance of smartphones in the sitting position ranged from 13.3 to 32.9 cm among participants. In the lying position, it ranged from 9.9 to 21.3cm. The viewing distance was longer in the sitting position than in the lying position (mean ± standard deviation: 20.3±4.7 vs 16.4±2.7, respectively, P<0.01). We found that the short viewing distance in the lying position had a positive correlation to a poorer sleep state (R2=0.27, P<0.05), lower sleep efficiency (R2=0.35, P<0.05), and longer sleep latency (R2=0.38, P<0.05). Moreover, smartphone viewing distances in lying position correlated negatively with subjective sleep status. Therefore, when recommending ideal smartphone use in lying position, one should take into account the viewing distances. PMID:28331379

  9. Utilization of simulation for the introduction of new software technology to the clinical setting.

    Science.gov (United States)

    Richie, Eugene; Dove, Conrad; Crowe, Shannon L; DeArment, Vickie; Manwiller, Jimmie; Wallace, Michael; Thiel, David D

    2014-09-01

    ProVation Medical documentation software was introduced in our Department of Gastroenterology (GI). We evaluated the use of a simulation module to improve the introduction of new documentation software into a tertiary care center GI department. Train-the-trainer education was provided by the vendor of the new documentation module. A simulation module was developed to simulate the preparatory, intraprocedural, and postprocedure phase of active utilization of the software. A standardized patient (SP)/medical actor was used for provision of data to be entered in to the ProVation Medical preprocedure module. A procedural suite was configured to allow for staff to assume their roles during endoscopic cases. A checklist of key activities was used by observers during the training. A postscenario evaluation document was collected for perceptions of training. Twenty-one GI nurses and technicians spent 3 hours in groups of 7 over a 3-day period completing activities commensurate with these procedural phases. Nineteen of 21 learners felt the simulation was nonthreatening, and the same number gave the course an overall 5/5 rating. There were no specimen labeling errors, patient identification errors, or sentinel events related to the software rollout. All learners felt that physician involvement in the simulation would have been beneficial. Simulation can be used to improve the rollout of new software in a tertiary care center. Staff satisfaction associated with this type of learning activity was high, and a communicated level of comfort was achieved as a result of the simulation-based experiential learning.

  10. Smartphone viewing distance and sleep: an experimental study utilizing motion capture technology.

    Science.gov (United States)

    Yoshimura, Michitaka; Kitazawa, Momoko; Maeda, Yasuhiro; Mimura, Masaru; Tsubota, Kazuo; Kishimoto, Taishiro

    2017-01-01

    There are studies reporting the negative impact of smartphone utilization on sleep. It is considered that reduction of melatonin secretion under the blue light exposure from smart-phone displays is one of the causes. The viewing distance may cause sleep disturbance, because the viewing distance determines the screen illuminance and/or asthenopia. However, to date, there has been no study closely investigating the impact of viewing distance on sleep; therefore, we sought to determine the relationship between smartphone viewing distance and subjective sleep status. Twenty-three nursing students (mean age ± standard deviation of 19.7±3.1 years) participated in the study. Subjective sleep status was assessed using the Pittsburgh Sleep Quality Index, morningness-eveningness questionnaire, and the Epworth sleepiness scale. We used the distance between the head and the hand while holding a smartphone to measure the viewing distance while using smartphones in sitting and lying positions. The distance was calculated using the three-dimensional coordinates obtained by a noncontact motion-sensing device. The viewing distance of smartphones in the sitting position ranged from 13.3 to 32.9 cm among participants. In the lying position, it ranged from 9.9 to 21.3cm. The viewing distance was longer in the sitting position than in the lying position (mean ± standard deviation: 20.3±4.7 vs 16.4±2.7, respectively, Psmartphone viewing distances in lying position correlated negatively with subjective sleep status. Therefore, when recommending ideal smartphone use in lying position, one should take into account the viewing distances.

  11. Studies on Effective Utilization of SOFC Exhaust Heat Using Thermoelectric Power Generation Technology

    Science.gov (United States)

    Terayama, Takeshi; Nagata, Susumu; Tanaka, Yohei; Momma, Akihiko; Kato, Tohru; Kunii, Masaru; Yamamoto, Atsushi

    2013-07-01

    Solid oxide fuel cells (SOFCs) are being researched around the world. In Japan, a compact SOFC system with rated alternative current (AC) power of 700 W has become available on the market, since the base load electricity demand for a standard home is said to be less than 700 W AC. To improve the generating efficiency of SOFC systems in the 700-W class, we focused on thermoelectric generation (TEG) technology, since there are a lot of temperature gradients in the system. Analysis based on simulations indicated the possibility of introducing thermoelectric generation at the air preheater, steam generator, and exhaust outlet. Among these options, incorporating a TEG heat exchanger comprising multiple CoSb3/SiGe-based TEG modules into the air preheater had potential to produce additional output of 37.5 W and an improvement in generating efficiency from 46% to 48.5%. Furthermore, by introducing thermoelectric generation at the other two locations, an increase in maximum output of more than 50 W and generating efficiency of 50% can be anticipated.

  12. Operating experience with CFB technology for waste utilization at a cement production plant

    Energy Technology Data Exchange (ETDEWEB)

    Wirthwein, R.; Scur, P.; Scharf, K.F. [Rudersdorfer Zement GmbH, (Germany); Hirschfelder, H. [Lurgi Energie und Entsorgung GmbH, (Germany)

    2002-07-01

    The Rudersdorf cement plant in Germany strives for high environmental standards, a high quality product and low production costs. The plant was the first to use circulating fluidized bed (CFB) technology in combination with a cement kiln. The following objectives were defined for the CFB: (1) use of waste as a low-cost raw materials and fuel for cement production, (2) ensure good combustion conditions even when using low quality fuels, and (3) produce raw material components which can be homogeneously integrated into the cement kiln feed stream. A gasification process was developed for processing a diverse waste stream to produce lean gas for use as a secondary fuel along with an inert ash that serves as a raw material component. The CFB unit was put into service in 1996. Since its launch, various plant components and waste pre-processing equipment have been optimized. The CFB unit has an availability of more than 90 per cent, and can process 120,000 tpa of secondary fuels, 150,000 tpa of ash, and 50,000 tpa of other mineral residues. Its use has contributed significantly to fuel costs savings and improved environmental performance at the cement production plant. 9 figs.

  13. Utilizing doctors' attitudes toward staff training to inform a chiropractic technology curriculum.

    Science.gov (United States)

    Eberhart, Catherine A; Martel, Stacie S

    2015-03-01

    The purpose of this study is to determine attitudes of doctors of chiropractic regarding the importance of staff training in specific skill areas to inform the curriculum management process of a chiropractic technology program. A survey was distributed to registrants of a chiropractic homecoming event. On a 5-point Likert scale, respondents were asked to rate the degree of importance that staff members be trained in specific skills. Descriptive statistics were derived, and a 1-way analysis of variance (ANOVA) was used to test differences between groups based on years in practice and level of staff training. Doctors place a high level of importance on oral communication skills and low importance on nutrition and physical examinations. Comparing groups based on years in practice revealed differences in the areas of passive physiotherapies (F = 3.61, p = .015), legal issues/regulations (F = 3.01, p = .032), occupational safety and health regulation (F = 4.27, p = .006), and marketing (F = 2.67, p = .049). Comparing groups based on level of staff training revealed differences in the areas of occupational safety and health regulations (F = 4.56, p = .005) and cardiopulmonary resuscitation (F = 4.91, p = .003). With regard to their assistants, doctors of chiropractic tend to place high importance on office skills requiring effective communication and place less importance on clinical skills such as physical examinations and physiotherapy.

  14. Challenges to Introduce Advanced Cooling Technology by the Utilization of Plural Cooling Velocity

    Institute of Scientific and Technical Information of China (English)

    Kiyoshi Funatani

    2004-01-01

    The control of cooling power is very important to introduce desired properties. Usually, higher the cooling rate higher the quench hardness and distortion and the optimization of cooling power is the base for good heat treatment. The change of cooling speed during quenching is one of the effective methods to balance hardness and distortion. Different form the general knowledge of the demerit of vapor blanket stage, oil with long vapor blanket stage is also one of effective methods to reduce distortion. The reduction of distortion with enough quench hardness seems to be possible by optimization of cooling condition by the help of computer simulation. The exhibition of higher core hardness than surface in through hardening steels experienced in the "Inverse quench hardening" was introduced by Prof. Tamura and Shimizu. This mechanism is well explained by Arimoto et al, by analysis of computer simulation. In this paper, plural steps cooling methods are compared, in relation with cooling curve and heat transfer coefficient that is necessary to simulate quench results and the possibility of advanced cooling technology is discussed.

  15. Utilizing Health Information Technology to Support Universal Healthcare Delivery: Experience of a National Healthcare System.

    Science.gov (United States)

    Syed-Abdul, Shabbir; Hsu, Min-Huei; Iqbal, Usman; Scholl, Jeremiah; Huang, Chih-Wei; Nguyen, Phung Anh; Lee, Peisan; García-Romero, Maria Teresa; Li, Yu-Chuan Jack; Jian, Wen-Shan

    2015-09-01

    Recent discussions have focused on using health information technology (HIT) to support goals related to universal healthcare delivery. These discussions have generally not reflected on the experience of countries with a large amount of experience using HIT to support universal healthcare on a national level. HIT was compared globally by using data from the Ministry of the Interior, Republic of China (Taiwan). Taiwan has been providing universal healthcare since 1995 and began to strategically implement HIT on a national level at that time. Today the national-level HIT system is more extensive in Taiwan than in many other countries and is used to aid administration, clinical care, and public health. The experience of Taiwan thus can provide an illustration of how HIT can be used to support universal healthcare delivery. In this article we present an overview of some key historical developments and successes in the adoption of HIT in Taiwan over a 17-year period, as well as some more recent developments. We use this experience to offer some strategic perspectives on how it can aid in the adoption of large-scale HIT systems and on how HIT can be used to support universal healthcare delivery.

  16. [Trends of utilization of information technologies in clinical laboratory and pathology domain].

    Science.gov (United States)

    Tofukuji, Ikuo

    2007-08-01

    The life expectancy of the Japanese population is one of longest in the world. Society is aging, with fewer children, increasing the total national medical payment in Japan. This situation has forced the Government to reduce the payment and to increase the efficiency of the medical system, so information technologies are expected to contribute to these policies. Electronic patient record systems (EPR) were expected to be used widely, but only 23% of clinical training hospitals have implemented them. This is mainly due to the lack of incentives and large costs to install EPR. Standardization is a good method to reduce system construction cost and increase its quality. New global IHE activities are expected to solve these problems with methodologies of workflow analyses, standard applications, tests and demonstrations. Laboratory information systems (LIS) have a long history and tradition of standard interfaces for connecting computers with analyzers. IHE activities for LIS are providing easy and secure connections with hospital information systems (HIS). Pathology departments also have their own information systems. IHE activities for pathology were launched in 2005, and we are now developing in collaboration with the international IHE pathology working group, HL7 SIG pathology and DICOM WG-26. Pathologists and technical experts in Japanese laboratories are encouraged to join IHE activities to ensure good results.

  17. A Study of the Driving Force Model Revealing Changes in Land Utilization Level Based on 3S Technologies--The Example of Yuanmou, Yunnan, China

    Institute of Scientific and Technical Information of China (English)

    HE Jin-feng; CHEN Guo-jie; YANG Zhong

    2005-01-01

    This paper introduced the theory and approaches of building driving force models revealing the changes in land utilization level by integrating RS, GPS, and GIS technologies based on the example of Yuanmou County of Yunnan Province. We first created the land utilization type database, natural driving forces for land utilization database, and human driving forces for land utilization database. Then we obtained the dependent and the independent variables of changes in land utilization level by exploring various data. Lastly we screened major factors affecting changes in land utilization level by using the po- werful spatial correlation analysis and main component analysis module of GIS and obtained a multivariable linear regression model of the changes in land utilization level by using GIS spatial regression analysis module.

  18. Smartphone viewing distance and sleep: an experimental study utilizing motion capture technology

    Directory of Open Access Journals (Sweden)

    Yoshimura M

    2017-03-01

    Full Text Available Michitaka Yoshimura,1,* Momoko Kitazawa,1–3,* Yasuhiro Maeda,2 Masaru Mimura,4 Kazuo Tsubota,1 Taishiro Kishimoto,4,5 1Department of Ophthalmology, Keio University School of Medicine, Tokyo, 2RIKEN Center for Advanced Photonics, Wako, Saitama, 3Department of Nursing, Aino University Junior College, 4Department of Neuropsychiatry, Keio University School of Medicine, Tokyo, Japan; 5Department of Psychiatry, Hofstra Northwell School of Medicine, NY, USA *These authors contributed equally to this work Abstract: There are studies reporting the negative impact of smartphone utilization on sleep. It is considered that reduction of melatonin secretion under the blue light exposure from smartphone displays is one of the causes. The viewing distance may cause sleep disturbance, because the viewing distance determines the screen illuminance and/or asthenopia. However, to date, there has been no study closely investigating the impact of viewing distance on sleep; therefore, we sought to determine the relationship between smartphone viewing distance and subjective sleep status. Twenty-three nursing students (mean age ± standard deviation of 19.7±3.1 years participated in the study. Subjective sleep status was assessed using the Pittsburgh Sleep Quality Index, morningness–eveningness questionnaire, and the Epworth sleepiness scale. We used the distance between the head and the hand while holding a smartphone to measure the viewing distance while using smartphones in sitting and lying positions. The distance was calculated using the three-dimensional coordinates obtained by a noncontact motion-sensing device. The viewing distance of smartphones in the sitting position ranged from 13.3 to 32.9 cm among participants. In the lying position, it ranged from 9.9 to 21.3cm. The viewing distance was longer in the sitting position than in the lying position (mean ± standard deviation: 20.3±4.7 vs 16.4±2.7, respectively, P<0.01. We found that the short viewing

  19. DTI measures track and predict motor function outcomes in stroke rehabilitation utilizing BCI technology.

    Science.gov (United States)

    Song, Jie; Nair, Veena A; Young, Brittany M; Walton, Leo M; Nigogosyan, Zack; Remsik, Alexander; Tyler, Mitchell E; Farrar-Edwards, Dorothy; Caldera, Kristin E; Sattin, Justin A; Williams, Justin C; Prabhakaran, Vivek

    2015-01-01

    Tracking and predicting motor outcomes is important in determining effective stroke rehabilitation strategies. Diffusion tensor imaging (DTI) allows for evaluation of the underlying structural integrity of brain white matter tracts and may serve as a potential biomarker for tracking and predicting motor recovery. In this study, we examined the longitudinal relationship between DTI measures of the posterior limb of the internal capsule (PLIC) and upper-limb motor outcomes in 13 stroke patients (median 20-month post-stroke) who completed up to 15 sessions of intervention using brain-computer interface (BCI) technology. Patients' upper-limb motor outcomes and PLIC DTI measures including fractional anisotropy (FA), axial diffusivity (AD), radial diffusivity (RD), and mean diffusivity (MD) were assessed longitudinally at four time points: pre-, mid-, immediately post- and 1-month-post intervention. DTI measures and ratios of each DTI measure comparing the ipsilesional and contralesional PLIC were correlated with patients' motor outcomes to examine the relationship between structural integrity of the PLIC and patients' motor recovery. We found that lower diffusivity and higher FA values of the ipsilesional PLIC were significantly correlated with better upper-limb motor function. Baseline DTI ratios were significantly correlated with motor outcomes measured immediately post and 1-month-post BCI interventions. A few patients achieved improvements in motor recovery meeting the minimum clinically important difference (MCID). These findings suggest that upper-limb motor recovery in stroke patients receiving BCI interventions relates to the microstructural status of the PLIC. Lower diffusivity and higher FA measures of the ipsilesional PLIC contribute toward better motor recovery in the stroke-affected upper-limb. DTI-derived measures may be a clinically useful biomarker in tracking and predicting motor recovery in stroke patients receiving BCI interventions.

  20. Novel Pulping Technology: Directed Green Liquor Utilization (D-GLU) Pulping

    Energy Technology Data Exchange (ETDEWEB)

    Lucian A. Lucia

    2005-11-15

    The general objectives of this new project are the same as those described in the original proposal. Conventional kraft pulping technologies will be modified for significant improvements in pulp production, such as strength, bleachability, and yield by using green liquor, a naturally high, kraft mill-derived sulfidity source. Although split white liquor sulfidity and other high sulfidity procedures have the promise of addressing several of the latter important economic needs of pulp mills, they require considerable engineering/capital retrofits, redesigned production methods, and thus add to overall mill expenditures. Green liquor use, however, possesses the required high sulfidity to obtain in general the benefits attributable to higher sulfidity cooking, without the required capital constraints for implementation. Before introduction of green liquor in our industrial operations, a stronger understanding of its fundamental chemical interaction with the lignin and carbohydrates in US hardwood and softwoods must be obtained. In addition, its effect on bleachability, enhancement of pulp properties, and influence on the overall energy and recovery of the mill requires further exploration before the process witnesses widespread mill use in North America. Thus, proof of principle will be accomplished in this work and the consequent effect of green liquor and other high sulfide sources on the pulping and bleaching operations will be explored for US kraft mills. The first year of this project will generate the pertinent information to validate its ability for implementation in US pulping operations, whereas year two will continue this work while proceeding to analyze pulp bleachability and final pulp/paper properties and develop a general economic and feasibility analysis for its eventual implementation in North America.

  1. Health utilities of type 2 diabetes-related complications: a cross-sectional study in Sweden.

    Science.gov (United States)

    Kiadaliri, Aliasghar A; Gerdtham, Ulf-G; Eliasson, Björn; Gudbjörnsdottir, Soffia; Svensson, Ann-Marie; Carlsson, Katarina Steen

    2014-05-07

    This study estimates health utilities (HU) in Sweden for a range of type 2 diabetes-related complications using EQ-5D and two alternative tariffs (UK and Swedish) from 1757 patients with type 2 diabetes from the Swedish National Diabetes Register (NDR). Ordinary least squares were used for statistical analysis. Lower HU was found for female gender, younger age at diagnosis, higher BMI, and history of complications. Microvascular and macrovascular complications had the most negative effect on HU among women and men, respectively. The greatest decline in HU was associated with kidney disorders (-0.114) using the UK tariff and stroke (-0.059) using the Swedish tariff. Multiple stroke and non-acute ischaemic heart disease had higher negative effect than a single event. With the UK tariff, each year elapsed since the last microvascular/macrovascular complication was associated with 0.013 and 0.007 units higher HU, respectively. We found important heterogeneities in effects of complications on HU in terms of gender, multiple event, and time. The Swedish tariff gave smaller estimates and so may result in less cost-effective interventions than the UK tariff. These results suggest that incorporating subgroup-specific HU in cost-utility analyses might provide more insight for informed decision-making.

  2. Health Utilities of Type 2 Diabetes-Related Complications: A Cross-Sectional Study in Sweden

    Directory of Open Access Journals (Sweden)

    Aliasghar A. Kiadaliri

    2014-05-01

    Full Text Available This study estimates health utilities (HU in Sweden for a range of type 2 diabetes-related complications using EQ-5D and two alternative tariffs (UK and Swedish from 1757 patients with type 2 diabetes from the Swedish National Diabetes Register (NDR. Ordinary least squares were used for statistical analysis. Lower HU was found for female gender, younger age at diagnosis, higher BMI, and history of complications. Microvascular and macrovascular complications had the most negative effect on HU among women and men, respectively. The greatest decline in HU was associated with kidney disorders (−0.114 using the UK tariff and stroke (−0.059 using the Swedish tariff. Multiple stroke and non-acute ischaemic heart disease had higher negative effect than a single event. With the UK tariff, each year elapsed since the last microvascular/macrovascular complication was associated with 0.013 and 0.007 units higher HU, respectively. We found important heterogeneities in effects of complications on HU in terms of gender, multiple event, and time. The Swedish tariff gave smaller estimates and so may result in less cost-effective interventions than the UK tariff. These results suggest that incorporating subgroup-specific HU in cost-utility analyses might provide more insight for informed decision-making.

  3. Future pathways for today's technologies. Limits and opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Niessen, Stefan [AREVA GmbH, Erlangen (Germany). Innovation- and Patent Management

    2015-06-01

    The majority of the feed-in tariffs as determined by the German Energy Feed-in Act (EEG) develop as follows: they decrease as the efficiency of technologies grows. However, there are some exceptions: offshore wind and geothermal energy feed-in tariffs have been rising, while storage technologies are not included at all although they are needed to make up for intermittent renewable generation. Furthermore, nuclear energy is burdened with the fuel tax, a kind of negative feed-in tariff. These technologies seem to be confronted with specific restrictions that yet prevent large-scale development. A thorough analysis of these limitations guides to the way to overcome them.

  4. Creating a Test Validated Structural Dynamic Finite Element Model of the Multi-Utility Technology Test Bed Aircraft

    Science.gov (United States)

    Pak, Chan-Gi; Truong, Samson S.

    2014-01-01

    Small modeling errors in the finite element model will eventually induce errors in the structural flexibility and mass, thus propagating into unpredictable errors in the unsteady aerodynamics and the control law design. One of the primary objectives of Multi Utility Technology Test Bed, X-56A, aircraft is the flight demonstration of active flutter suppression, and therefore in this study, the identification of the primary and secondary modes for the structural model tuning based on the flutter analysis of X-56A. The ground vibration test validated structural dynamic finite element model of the X-56A is created in this study. The structural dynamic finite element model of the X-56A is improved using a model tuning tool. In this study, two different weight configurations of the X-56A have been improved in a single optimization run.

  5. High-temperature electron irradiation and radiation-thermal technology for utilization, purification and production of some metals

    CERN Document Server

    Solovetskii, Y; Lunin, V

    1998-01-01

    High-temperature irradiation by the beam of 1.2-1.6 MeV accelerated electrons has been used for production Pt, Pd, Mo, Co, Cu and Ni from desactivated Pt(Pd)-containing reforming catalysts, molybdenum sulfide hydrodesulphurization catalysts and hydrogenation catalyst waste material. The radiation-induced decomposition of supported Ni(Co)-Mo/Al sub 2 O sub 3 sulfide catalyst and organic fragments of hydrogenation catalyst wastes has been studied. Radiolysis product distributions are shown as function of time (time up to 1,0 h) and temperature (570-1400K). There was made a principle scheme of the first technological unit for radiation-thermal utilization, purification and production of some metals from solid wastes material.

  6. Long-Term Monitoring of Utility-Scale Solar Energy Development and Application of Remote Sensing Technologies: Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    Hamada, Yuki [Argonne National Lab. (ANL), Argonne, IL (United States). Environmental Science Division; Grippo, Mark A. [Argonne National Lab. (ANL), Argonne, IL (United States). Environmental Science Division; Smith, Karen P. [Argonne National Lab. (ANL), Argonne, IL (United States). Environmental Science Division

    2014-09-30

    In anticipation of increased utility-scale solar energy development over the next 20 to 50 years, federal agencies and other organizations have identified a need to develop comprehensive long-term monitoring programs specific to solar energy development. Increasingly, stakeholders are requesting that federal agencies, such as the U.S. Department of the Interior Bureau of Land Management (BLM), develop rigorous and comprehensive long-term monitoring programs. Argonne National Laboratory (Argonne) is assisting the BLM in developing an effective long-term monitoring plan as required by the BLM Solar Energy Program to study the environmental effects of solar energy development. The monitoring data can be used to protect land resources from harmful development practices while at the same time reducing restrictions on utility-scale solar energy development that are determined to be unnecessary. The development of a long-term monitoring plan that incorporates regional datasets, prioritizes requirements in the context of landscape-scale conditions and trends, and integrates cost-effective data collection methods (such as remote sensing technologies) will translate into lower monitoring costs and increased certainty for solar developers regarding requirements for developing projects on public lands. This outcome will support U.S. Department of Energy (DOE) Sunshot Program goals. For this reason, the DOE provided funding for the work presented in this report.

  7. CO2的化工利用技术展望%Technology Prospects of Chemical Utilization of CO2

    Institute of Scientific and Technical Information of China (English)

    方向晨; 张志智; 张喜文

    2011-01-01

    Main routes for chemical uflization of CO2 were compared. Among these routes, the route of producing carboxyi-containing oxygenated compounds from CO2 was the most developing and prosperous route from the aspects of energy utilization and economics. At the same time, several utilization technologies of CO2 with well market prospect were introduced as well as their developing trend.%分析比较了CO2的化工利用主要途径,发现在这些化工利用途径中从CO2出发生产含羧基等高含氧化合物的技术路线,在能量利用和经济性的角度,目前是最有发展前景的.同时详细讨论了几种具有市场应用前景的CO2化工利用技术及其发展的趋势.

  8. Implementation of health information technology to maximize efficiency of resource utilization in a geographically dispersed prenatal care delivery system.

    Science.gov (United States)

    Cochran, Marlo Baker; Snyder, Russell R; Thomas, Elizabeth; Freeman, Daniel H; Hankins, Gary D V

    2012-04-01

    This study investigated the utilization of health information technology (HIT) to enhance resource utilization in a geographically dispersed tertiary care system with extensive outpatient and delivery services. It was initiated as a result of a systems change implemented after Hurricane Ike devastated southeast Texas. A retrospective database and electronic medical record review was performed, which included data collection from all patients evaluated 18 months prior (epoch I) and 18 months following (epoch II) the landfall of Hurricane Ike. The months immediately following the storm were omitted from the analysis, allowing time to establish a new baseline. We analyzed a total of 21,201 patients evaluated in triage at the University of Texas Medical Branch. Epoch I consisted of 11,280 patients and epoch II consisted of 9922 patients. Using HIT, we were able to decrease the number of visits to triage while simultaneously managing more complex patients in the outpatient setting with no clinically significant change in maternal or fetal outcome. This study developed an innovated model of care using constrained resources while providing quality and safety to our patients without additional cost to the health care delivery system.

  9. Next-generation long-term transplant clinics: improving resource utilization and the quality of care through health information technology.

    Science.gov (United States)

    Rioth, M J; Warner, J; Savani, B N; Jagasia, M

    2016-01-01

    By the year 2020, potentially one-half a million hematopoietic cell transplant (HCT) recipients will need long-term follow-up care to address not only chronic GvHD but also multiple other late consequences of transplant. Despite this increase in patients, there will not be a concomitant increase in the HCT workforce. Thus, the future of long-term patient management will require a new 'next-generation' clinical model that utilizes technological solutions to make the care of the HCT patient efficient, safe and cost-effective. Guideline-based decision support will be embedded in clinical workflows. Documentation requirements will be reduced as automated data collection from electronic medical records (EMRs) will populate registries and provide feedback for a rapid learning health system. Interoperable EMRs will disseminate treatment protocols to multiple care providers in a distributed long-term clinic model, such that providers outside of the transplant center can provide services closer to the patient. Patients will increase their participatory role through patient portals and mobile devices. At Vanderbilt, we have responded to some of these future challenges by embedding guideline-based decision support, structuring clinical documentation and being early adopters of communication technology. This manuscript describes the current state of some of these innovations, and a vision for the future of the long-term transplant clinic.

  10. Demonstration of SCR technology for the control of NOx emissions from high-sulfur coal-fired utility boilers

    Energy Technology Data Exchange (ETDEWEB)

    Hinton, W.S. [W.S. Hinton and Associates, Cantonment, FL (United States); Maxwell, J.D.; Healy, E.C.; Hardman, R.R. [Southern Company Services, Inc., Birmingham, AL (United States); Baldwin, A.L. [Dept. of Energy, Pittsburgh, PA (United States)

    1997-12-31

    This paper describes the completed Innovative Clean Coal Technology project which demonstrated SCR technology for reduction of flue gas NO{sub x} emissions from a utility boiler burning US high-sulfur coal. The project was sponsored by the US Department of Energy, managed and co-funded by Southern Company Services, Inc. on behalf of the Southern Company, and also co-funded by the Electric Power Research Institute and Ontario Hydro. The project was located at Gulf Power Company`s Plant Crist Unit 5 (a 75 MW tangentially-fired boiler burning US coals that had a sulfur content ranging from 2.5--2.9%), near Pensacola, Florida. The test program was conducted for approximately two years to evaluate catalyst deactivation and other SCR operational effects. The SCR test facility had nine reactors: three 2.5 MW (5,000 scfm), and operated on low-dust flue gas. The reactors operated in parallel with commercially available SCR catalysts obtained from suppliers throughout the world. Long-term performance testing began in July 1993 and was completed in July 1995. A brief test facility description and the results of the project are presented in this paper.

  11. Who reaps the benefits, who bears the risks? Comparative optimism, comparative utility, and regulatory preferences for mobile phone technology.

    Science.gov (United States)

    White, Mathew P; Eiser, J Richard; Harris, Peter R; Pahl, Sabine

    2007-06-01

    Although the issue of risk target (e.g., self, others, children) is widely acknowledged in risk perception research, its importance appears underappreciated. To date, most research has been satisfied with demonstrating comparative optimism, i.e., lower perceived risk for the self than others, and exploring its moderators, such as perceived controllability and personal exposure. Much less research has investigated how the issue of target may affect benefit perceptions or key outcomes such as stated preferences for hazard regulation. The current research investigated these issues using data from a public survey of attitudes toward mobile phone technology (N= 1,320). First, results demonstrated comparative optimism for this hazard, and also found moderating effects of both controllability and personal exposure. Second, there was evidence of comparative utility, i.e., users believed that the benefits from mobile phone technology are greater for the self than others. Third, and most important for policy, preferences for handset regulation were best predicted by perceptions of the risks to others but perceived benefits for the self. Results suggest a closer awareness of target can improve prediction of stated preferences for hazard regulation and that it would be profitable for future research to pay more attention to the issue of target for both risk and benefit perceptions.

  12. Non-Tariff Barriers and Factors that influence The Indonesian Cocoa Export to Europe

    Directory of Open Access Journals (Sweden)

    Raditya Anggoro

    2016-06-01

    Full Text Available The aim of this study are: first, to analyse the competitiveness of Indonesian cocoa in the European Unio market; second, to analyse the competitiveness and the factors that influence the Indonesian cocoa exports to the EU market; third, to calculate the non-tariff barriers imposed by the European Union market for Indonesian cocoa. Methods used are the RCA index and gravity models. The differences between actual and potential trade flows are indicated as non-tariff barriers. Results of the calculation RCA is showed that all destinations of a cocoa export have a high competitiveness (RCA> 1 but tend to decrease. Results of the estimate gravity models show the factors influencing the Indonesian cocoa exports are the real per capita GDP of Indonesia and the destination country, CPI of destination countries, the economic distance, exchange rates, and tariff. The result of non-tariff barriers indicated that the Netherlands is the state which has the largest non-tariff barriers among the most other EU countriesDOI:  10.15408/sjie.v5i1.3131 

  13. Electricity tariff systems for informatics system design regarding consumption optimization in smart grids

    Directory of Open Access Journals (Sweden)

    Simona Vasilica OPREA

    2016-01-01

    Full Text Available High volume of data is gathered via sensors and recorded by smart meters. These data are processed at the electricity consumer and grid operators' side by big data analytics. Electricity consumption optimization offers multiple advantages for both consumers and grid operators. At the electricity customer level, by optimizing electricity consumption savings are significant, but the main benefits will come from indirect aspects such as avoiding onerous grid investments, higher volume of renewable energy sources' integration, less polluted environment etc. In order to optimize electricity consumption, advanced tariff systems are essential due to the financial incentive they provide for electricity consumers' behaviour change. In this paper several advanced tariff systems are described in details. These systems are applied in England, Spain, Italy, France, Norway and Germany. These systems are compared from characteristics, advantages/disadvantages point of view. Then, different tariff systems applied in Romania are presented. Romanian tariff systems have been designed for various electricity consumers' types. Different tariff systems applied by grid operators or electricity suppliers will be included in the database model that is part of an informatics system for electricity consumption optimization.

  14. Determination of hourly contract heat and water flow and demand of the tariffs; Tuntinen tilaustehon ja -vesivirran maeaeritys ja tariffien vaatimukset

    Energy Technology Data Exchange (ETDEWEB)

    Hippinen, I.; Pirhonen, J.; Ahtila, P. [Helsinki University of Technology, Otaniemi (Finland); Maekelae, V.M. [Komartek Oy, Lappeenranta (Finland)

    2000-07-01

    This is the final report of the research project 'Determination of hourly contract heat and water flow and demand of the tariffs', which was carried out by the Helsinki University of Technology and Komartek Oy. The report consists of two parts. Part A presents the study of the Helsinki University of Technology, in which the consumption of domestic hot water in different size houses were clarified. Part B presents the tariff calculations carried out by Komartek Oy. In the part of the Helsinki University of Technology, the consumption of hot household water has been measured in different sized houses in order to determine their real demand of district heat and heat exhanger capacity. Including earlier measurements, measurements were carried out in 35 buildings. The size of the houses varied from a two-family house to a house of 204 flats. The domestic hot water flows and water temperatures to and from the heat exchanger were measured continuously during periods of a day and a week. To find out the congruence between reality and the dimensioning standards, the measurement results have been compared with the current dimensioning standards. It became evident in the study, that the current dimensioning standards are considerably oversized. Measured maximum heat consumptions were in general less than half of the dimensioned maximums. Operation times for the maximum loads were very short timed, ranging from some tens of seconds to a couple of minutes. The maximum peak loads were either in the mornings or in the evenings. However, no special week-days with clear maximum loads were found during week measurements. In second part was studied how the domestic hot water consumption will influence on the incomes of a DH company and payments of different kinds of customers. Domestic hot water was calculated as a one hour maximum. It was found out that there were outstanding differences in payments of different sizes of customers between different tariffs when the total

  15. ASSESSING TAXPAYER BEHAVIOR IN UTILIZING E-FILLING TAX SYSTEM WITH THE PERSPECTIVE OF TECHNOLOGY ACCEPTANCE MODEL AND THE THEORY OF PLANNED BEHAVIOR

    OpenAIRE

    Maharani H.; Subroto B.; Ghofar A.

    2017-01-01

    This study aims to assess the factors which influence taxpayer behavior in utilizing e-filling tax system. This study combines Technology Acceptance Model and the Theory of Planned Behavior. The data was collected through a survey method. It took 100 respondents of the personal taxpayers of the Pratama Gresik Utara tax office's employee in utilizing the e-filing to submit their tax return. In order to assess the data, the researchers used Partial Least Square statistical method. The finding s...

  16. Implementation of a Dual Containment/Surveillance System utilizing scene-change detection and radio frequency technology

    Energy Technology Data Exchange (ETDEWEB)

    FITZGERALD, ERIC; KOENIG, RICHARD

    2005-06-27

    This paper will examine the implementation of scene-change detection and radio frequency technology within a Dual Containment/Surveillance (C/S) System. Additionally, this paper will examine the human performance factors in the operation of these systems. Currently, Westinghouse Savannah River Company utilizes the Continuous Item Monitoring and Surveillance System (CIMS) in the performance of Dual C/S to monitor special nuclear materials within International Atomic Energy Agency (IAEA) Safeguards and Domestic Safeguards. CIMS is comprised of the Material Monitoring System (MMS) (R), a multi-media electronic surveillance system developed by Sandia National Laboratory which incorporates the use of active seals commonly called Radio Frequency Tamper Indicating Devices (RFTIDs), NT Vision (R) as developed by Los Alamos National Laboratory, a Microsoft Windows NT (R) based operating system providing for domestic scene-change detection and the Digital Multi-Camera Optical Surveillance System (DMOS) (R) which provides scene-change detection for IAEA. Although this paper will focus on the implementation of Dual C/S utilizing the Continuous Item Monitoring and Surveillance System, the necessity for a thorough review of Safeguards and Security requirements with organizations and personnel having minimal to no prior MPC&A training will also be covered. Successful Dual C/S implementation plans must consider not only system design and failure modes, but must also be accompanied with the appropriate ''mind shift'' within operations and technical personnel. This is required to ensure completion of both physical and electronic activities, and system design changes are performed conscientiously and with full awareness of MPC&A requirements.

  17. Effect of A-Level Subject Choice and Entry Tariff on Final Degree and Level 1 Performance in Biosciences

    Science.gov (United States)

    King, Nicola C.; Aves, Stephen J.

    2012-01-01

    Following the publication of the higher education white paper increasing entry tariff and widening participation have become even more important issues for universities. This report examines the relationship between entry tariff and undergraduate achievement in Biosciences at the University of Exeter. We show that, whilst there is a significant…

  18. 75 FR 38764 - USDA Reassigns Domestic Cane Sugar Allotments and Increases the Fiscal Year 2010 Raw Sugar Tariff...

    Science.gov (United States)

    2010-07-06

    ... USDA Reassigns Domestic Cane Sugar Allotments and Increases the Fiscal Year 2010 Raw Sugar Tariff-Rate... announced a reassignment of surplus sugar under domestic cane sugar allotments of 300,000 short tons raw value (STRV) to imports, and increased the fiscal year (FY) 2010 raw sugar tariff-rate quota (TRQ) by...

  19. 76 FR 21418 - Fiscal Year 2011 Allocation of Additional Tariff-Rate Quota Volume for Raw Cane Sugar and...

    Science.gov (United States)

    2011-04-15

    ... Sugar and Reallocation of Unused Fiscal Year 2011 Tariff-Rate Quota Volume for Raw Cane Sugar AGENCY... Fiscal Year (FY) 2011 in-quota quantity of the tariff-rate quota (TRQ) for imported raw cane sugar and of... raw cane sugar. DATES: Effective Date: April 15, 2011. ADDRESSES: Inquiries may be mailed or delivered...

  20. 77 FR 25012 - Fiscal Year 2012 Allocation of Additional Tariff-Rate Quota Volume for Raw Cane Sugar and...

    Science.gov (United States)

    2012-04-26

    ... Sugar and Reallocation of Unused Fiscal Year 2012 Tariff-Rate Quota Volume for Raw Cane Sugar AGENCY... Fiscal Year (FY) 2012 in-quota quantity of the tariff-rate quota (TRQ) for imported raw cane sugar and of... raw cane sugar. DATES: Effective Date: April 26, 2012. ADDRESSES: Inquiries may be mailed or delivered...

  1. 75 FR 14479 - Reallocation of Unused Fiscal Year 2010 Tariff-Rate Quota Volume for Raw Cane Sugar

    Science.gov (United States)

    2010-03-25

    ... TRADE REPRESENTATIVE Reallocation of Unused Fiscal Year 2010 Tariff-Rate Quota Volume for Raw Cane Sugar... fiscal year (FY) 2010 in-quota quantity of the tariff-rate quota (TRQ) for imported raw cane sugar. DATES... maintains TRQs for imports of raw cane and refined sugar. Section 404(d)(3) of the Uruguay Round Agreements...

  2. In the name of legal certainty? Comparison of advance ruling for tariff classification in the European Union, China and Taiwan

    NARCIS (Netherlands)

    Chen, S.

    2016-01-01

    In many jurisdictions, international traders can apply to customs authorities for an advance ruling for tariff classification before they import or export their goods. The advance ruling system for tariff classification is expected to grant more legal certainty to international traders because they

  3. Effect of A-Level Subject Choice and Entry Tariff on Final Degree and Level 1 Performance in Biosciences

    Science.gov (United States)

    King, Nicola C.; Aves, Stephen J.

    2012-01-01

    Following the publication of the higher education white paper increasing entry tariff and widening participation have become even more important issues for universities. This report examines the relationship between entry tariff and undergraduate achievement in Biosciences at the University of Exeter. We show that, whilst there is a significant…

  4. 76 FR 46267 - Increase in Fiscal Year 2011 Specialty Sugar Tariff-Rate Quota; Determination of Total Amounts of...

    Science.gov (United States)

    2011-08-02

    ..., 2012. The second, third, fourth, and fifth tranches will be reserved for organic sugar and other... Office of the Secretary Increase in Fiscal Year 2011 Specialty Sugar Tariff-Rate Quota; Determination of Total Amounts of Fiscal Year 2012 Tariff-Rate Quotas for Raw Cane Sugar and Certain Sugars, Syrups...

  5. Development of Technologies for a High Efficiency, Very Low Emission, Diesel Engine for Light Trucks and Sport Utility Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Stang, John H.

    2005-12-19

    Cummins Inc., in partnership with the Department of Energy, has developed technology for a new highly efficient, very low emission, diesel engine for light trucks and sport utility vehicles. This work began in April 1997, and started with very aggressive goals for vehicles in the 5751 to 8500 pound GCW weight class. The primary program goals were as follows: (1) EMISSIONS -- NOx = 0.50 g/mi; PM = 0.05 g/mi; CO = 2.8 g/mi; and NMHC = 0.07 g/mi. California decided to issue new and even tougher LEV II light truck regulations late in 1999. EPA also issued its lower Tier 2 regulations late in 2000. The net result was that the targets for this diesel engine project were lowered, and these goals were eventually modified by the publication of Federal Tier 2 emission standards early in 2000 to the following: NOx = 0.07 g/mi; and PM = 0.01 g/mi. (2) FUEL ECONOMY -- The fuel economy goal was 50 percent MPG improvement (combined city/highway) over the 1997 gasoline powered light truck or sport utility vehicle in the vehicle class for which this diesel engine is being designed to replace. The goal for fuel economy remained at 50 percent MPG improvement, even with the emissions goal revisions. (3) COOPERATIVE DEVELOPMENT -- Regular design reviews of the engine program will be conducted with a vehicle manufacturer to insure that the concepts and design specifics are commercially feasible. (DaimlerChrysler has provided Cummins with this design review input.) Cummins has essentially completed a demonstration of proof-of-principle for a diesel engine platform using advanced combustion and fuel system technologies. Cummins reported very early progress in this project, evidence that new diesel engine technology had been developed that demonstrated the feasibility of the above emissions goals. Emissions levels of NOx = 0.4 g/mi and PM = 0.06 g/mi were demonstrated for a 5250 lb. test weight vehicle with passive aftertreatment only. These results were achieved using the full chassis

  6. Development of Technologies for a High Efficiency, Very Low Emission, Diesel Engine for Light Trucks and Sport Utility Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    John H. Stang

    2005-12-31

    Cummins Inc., in partnership with the Department of Energy, has developed technology for a new highly efficient, very low emission, diesel engine for light trucks and sport utility vehicles. This work began in April 1997, and started with very aggressive goals for vehicles in the 5751 to 8500 pound GCW weight class. The primary program goals were as follows: (1) EMISSIONS--NO{sub x} = 0.50 g/mi; PM = 0.05 g/mi; CO = 2.8 g/mi; and NMHC = 0.07 g/mi. California decided to issue new and even tougher LEV II light truck regulations late in 1999. EPA also issued its lower Tier 2 regulations late in 2000. The net result was that the targets for this diesel engine project were lowered, and these goals were eventually modified by the publication of Federal Tier 2 emission standards early in 2000 to the following: NO{sub x} = 0.07 g/mi; and PM = 0.01 g/mi. (2) FUEL ECONOMY--The fuel economy goal was 50 percent MPG improvement (combined city/highway) over the 1997 gasoline powered light truck or sport utility vehicle in the vehicle class for which this diesel engine is being designed to replace. The goal for fuel economy remained at 50 percent MPG improvement, even with the emissions goal revisions. (3) COOPERATIVE DEVELOPMENT--Regular design reviews of the engine program will be conducted with a vehicle manufacturer to insure that the concepts and design specifics are commercially feasible. (DaimlerChrysler has provided Cummins with this design review input.) Cummins has essentially completed a demonstration of proof-of-principle for a diesel engine platform using advanced combustion and fuel system technologies. Cummins reported very early progress in this project, evidence that new diesel engine technology had been developed that demonstrated the feasibility of the above emissions goals. Emissions levels of NOx = 0.4 g/mi and PM = 0.06 g/mi were demonstrated for a 5250 lb. test weight vehicle with passive aftertreatment only. These results were achieved using the full

  7. The tariff for fire and theft car insurance: analysis with a Cox model

    Directory of Open Access Journals (Sweden)

    Bruno Scarpa

    2013-05-01

    Full Text Available In this paper we analyze the problem of identification of a tariff for a Fire & Theft Car policy for Insurance Companies. Usually companies obtain this tariff by empirical estimate of the pure rate by evaluating the impact of some personalization variables. In this paper we propose the usage of a semi-parametric Cox model, where the response variable is not the waiting time until an event, but the degree of damage because of theft or fire of a car. The proposed model allows to easily tackle typical problems in data available to the companies, like the presence of franchises, which are treated as censored data.

  8. Schemes for aggregating preferential tariffs in agriculture,export volume effects and African LDCs

    DEFF Research Database (Denmark)

    Yu, Wusheng

    Trade-weighted aggregated tariffs (TWPT) are often used in analyzing the issues of erosion of non-reciprocal preferences. This paper argues that commonly used TWPTs under-estimate the true protection on imports originated from preference-receiving countries, including LDCs. When used in numerical...... simulations of preference erosion and expansion scenarios, the TWPTs tend to incorrectly downplay preference erosion effect of MFN tariff cuts, and understate the export promotion effect of expanding preferences. In light of these claims, an alternative aggregation scheme is developed to calculate aggregated...

  9. Optimal reconfiguration-based dynamic tariff for congestion management and line loss reduction in distribution networks

    DEFF Research Database (Denmark)

    Huang, Shaojun; Wu, Qiuwei; Cheng, Lin

    2016-01-01

    This paper presents an optimal reconfiguration-based dynamic tariff (DT) method for congestion management and line loss reduction in distribution networks with high penetration of electric vehicles. In the proposed DT concept, feeder reconfiguration (FR) is employed through mixed integer programm......This paper presents an optimal reconfiguration-based dynamic tariff (DT) method for congestion management and line loss reduction in distribution networks with high penetration of electric vehicles. In the proposed DT concept, feeder reconfiguration (FR) is employed through mixed integer...... manner through the DT framework. Three case studies were conducted to validate the optimal reconfiguration-based DT method for congestion management and line loss reduction in distribution networks....

  10. STUDY ON THE MAIN THEORETICAL ASPECTS RELATING TO THE PREMIUM TARIFFS IN THE PROPERTY INSURANCE

    Directory of Open Access Journals (Sweden)

    Vaduva Maria

    2012-03-01

    Full Text Available In the insurance market of goods, most of the first levied by the insurer is used for payment of damages due insured. The element mainly depending on which he fixes the level of share premium pricing is likely to size claims the insurer will pay insured. Part of the quota tariff intended for the first payment of damages is called net or share of first base. Adding to the addition cover expenditure on lodging and administering the fund insurance and financing of measures to prevent the damage, formation of the reserve fund and achieve the insurer has a specific benefit, get the first tariff or first gross.

  11. The Utilization of Historical Data and Geospatial Technology Advances at the Jornada Experimental Range to Support Western America Ranching Culture

    Directory of Open Access Journals (Sweden)

    Kris Havstad

    2011-09-01

    Full Text Available By the early 1900s, concerns were expressed by ranchers, academicians, and federal scientists that widespread overgrazing and invasion of native grassland by woody shrubs were having severe negative impacts upon normal grazing practices in Western America. Ranchers wanted to reverse these trends and continue their way of life and were willing to work with scientists to achieve these goals. One response to this desire was establishment of the USDA Jornada Experimental Range (783 km2 in south central New Mexico by a Presidential Executive Order in 1912 for conducting rangeland investigations. This cooperative effort involved experiments to understand principles of proper management and the processes causing the woody shrub invasion as well as to identify treatments to eradicate shrubs. By the late 1940s, it was apparent that combining the historical ground-based data accumulated at Jornada Experimental Range with rapidly expanding post World War II technologies would yield a better understanding of the driving processes in these arid and semiarid ecosystems which could then lead to improved rangeland management practices. One specific technology was the use of aerial photography to interpret landscape resource conditions. The assembly and utilization of long-term historical aerial photography data sets has occurred over the last half century. More recently, Global Positioning System (GPS techniques have been used in a myriad of scientific endeavors including efforts to accurately locate historical and contemporary treatment plots and to track research animals including livestock and wildlife. As an incredible amount of both spatial and temporal data became available, Geographic Information Systems have been exploited to display various layers of data over the same locations. Subsequent analyses of these data layers have begun to yield new insights. The most recent technological development has been the deployment of Unmanned Aerial Vehicles (UAVs

  12. The utility and impact of information communication technology (ICT) for pre-registration nurse education: A narrative synthesis systematic review.

    Science.gov (United States)

    Webb, Lucy; Clough, Jonathan; O'Reilly, Declan; Wilmott, Danita; Witham, Gary

    2017-01-01

    To evaluate and summarise the utility and impact of information communication technology (ICT) in enhancing student performance and the learning environment in pre-registration nursing. A systematic review of empirical research across a range of themes in ICT health-related education. Science Direct, Cinahl, AMED, MEDLINE, PubMed, ASSIA, OVID and OVID SP (2008-2014). Further date parameters were imposed by theme. Evidence was reviewed by narrative synthesis, adopting Caldwell's appraisal framework and CASP for qualitative methods. Selection and inclusion was grounded in the PICOS structure, with language requirements (English), and further parameters were guided by theme appropriateness. Fifty studies were selected for review across six domains: reusable learning objects, media, audience response systems, e-portfolios, computer-based assessment and faculty adoption of e-learning. Educational ICT was found to be non-inferior to traditional teaching, while offering benefits to teaching and learning efficiency. Where support is in place, ICT improves the learning environment for staff and students, but human and environmental barriers need to be addressed. This review illuminates more advantages for ICT in nurse training than previously. The key advantage of flexibility is supported, though with little evidence for effect on depth of learning. Crown Copyright © 2016. Published by Elsevier Ltd. All rights reserved.

  13. Assistive Technology Needs, Functional Difficulties, and Services Utilization and Coordination of Children with Developmental Disabilities in the United States.

    Science.gov (United States)

    Lin, Sue C; Gold, Robert S

    2017-01-31

    Assistive technology (AT) enhances the ability of individuals with disabilities to be fully engaged in activities at home, at school, and within their communities-especially for children with developmental disabilities (DD) with physical, sensory, learning, and/or communication impairments. The prevalence of children with DD in the United States has risen from 12.84% in 1997 to 15.04% in 2008. Thus, it is important to monitor the status of their AT needs, functional difficulties, services utilization, and coordination. Using data from the 2009-2010 National Survey on Children with Special Health Care Needs (NS-CSHCN), we conducted bivariate and multivariate statistical analysis, which found that 90% or more of parents of both children with DD and other CSHCN reported that their child's AT needs were met for vision, hearing, mobility, communication, and durable medical equipment; furthermore, children with DD had lower odds of AT needs met for vision and hearing and increased odds for meeting AT needs in mobility and communication. Our findings outline the current AT needs of children with DD nationally. Fulfilling these needs has the potential to engender positive lifelong effects on the child's disabilities, sense of independence, self-confidence, and productivity.

  14. Driving into Euroland with AdBlue. Environmental friendly diesel technology for utility vehicles; Mit AdBlue ins Euroland. Umweltfreundliche Dieseltechnologie fuer Nutzfahrzeuge

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    The SCR-diesel technology introduced by DaimlerChrysler has already established itself successfully in the field of utility vehicles under the name BlueTec. This drive technique already meets today the exhaust gas limiting values of tomorrow and is now also available for buses. (orig.)

  15. The impact of the utilization of digital technology in hydraulic turbines speed regulators; O impacto da utilizacao de tecnologia digital em reguladores de velocidade de turbinas hidraulicas

    Energy Technology Data Exchange (ETDEWEB)

    Tiburcio, Solange Numeriano Nen; Viegas, Francisco Carlos Ferreira [Comapnhia Hidroeletrica do Sao Franciso, Recife, PE (Brazil)

    1995-12-31

    The aim of this work which was performed based on the experience acquired during the implementation of digital speed regulators in Xingo hydroelectric power plant is to present the characteristics of the system implanted and analyses the technological impact caused to the hydroelectric turbines primary control by the utilization of such kind of regulators 6 figs., 3 refs.

  16. Utilization of Innovations and Techniques of Educational Technology in Delivering of Educational Practicum and Its Impact on Increasing Academic Achievement among Pre-Service Teachers

    Science.gov (United States)

    Ibrahim, Hatim G.

    2017-01-01

    The current study aims to identify the utilization of innovations and techniques of educational technology in teaching of educational practicum and its impact on increasing academic achievement among pre-service teachers. The study sample consisted of (60) pre-service teachers (student teachers) randomly selected from public middle and secondary…

  17. Making an IMPAKT; Improving care of Chronic Kidney Disease patients in the community through collaborative working and utilizing Information Technology.

    Science.gov (United States)

    Xu, Gang; Major, Rupert; Shepherd, David; Brunskill, Nigel

    2017-01-01

    Chronic kidney disease (CKD) is a serious long-term condition, which if left untreated causes significant cardiovascular sequele. It is well recognized management of modifiable risk factors, such as blood pressure (BP), can lead to improved long-term outcomes. A novel information technology (IT) solution presents a possible solution to help clinicians in the community identify and manage at risk patients more efficiently. The IMproving Patient care and Awareness of Kidney disease progression Together (IMPAKT) IT tool was used to identify patients with CKD and uncontrolled hypertension in the community. A CKD nurse utilized the tool at primary care practices to identify patients who warranted potential intervention and disseminated this information to clinical staff. Blood pressure management targets and incidence of coded CKD were used to evaluate the project. Altogether 48 practices participated in an 18 month project from April 2014, and data from 20 practices, with a total adult population of 121,362, was available for analysis. Two full consecutive QI (Quality Improvement) audit cycles were completed. There was an increase in the mean recorded prevalence of coded CKD patients over the course of the project. Similarly, there was an increase in the percentage of patients with BP been recorded and importantly there was an accompanying significant increase in CKD patients achieving BP targets. At the end of the project an additional 345 individuals with CKD achieved better blood pressure control. This could potentially prevent 9 cardiovascular events in the CKD group, translating to a cost saving of £320,000 for the 20 practices involved. The most significant change in clinical markers occurred during cycle 1 of the audit, the improvement was maintained throughout cycle 2 of the audit. Our results show the real-life clinical impact of a relatively simple and easy to implement QI project, to help improve outcomes in patients with CKD. This was achieved through more

  18. Making an IMPAKT; Improving care of Chronic Kidney Disease patients in the community through collaborative working and utilizing Information Technology

    Science.gov (United States)

    Xu, Gang; Major, Rupert; Shepherd, David; Brunskill, Nigel

    2017-01-01

    Chronic kidney disease (CKD) is a serious long-term condition, which if left untreated causes significant cardiovascular sequele. It is well recognized management of modifiable risk factors, such as blood pressure (BP), can lead to improved long-term outcomes. A novel information technology (IT) solution presents a possible solution to help clinicians in the community identify and manage at risk patients more efficiently. The IMproving Patient care and Awareness of Kidney disease progression Together (IMPAKT) IT tool was used to identify patients with CKD and uncontrolled hypertension in the community. A CKD nurse utilized the tool at primary care practices to identify patients who warranted potential intervention and disseminated this information to clinical staff. Blood pressure management targets and incidence of coded CKD were used to evaluate the project. Altogether 48 practices participated in an 18 month project from April 2014, and data from 20 practices, with a total adult population of 121,362, was available for analysis. Two full consecutive QI (Quality Improvement) audit cycles were completed. There was an increase in the mean recorded prevalence of coded CKD patients over the course of the project. Similarly, there was an increase in the percentage of patients with BP been recorded and importantly there was an accompanying significant increase in CKD patients achieving BP targets. At the end of the project an additional 345 individuals with CKD achieved better blood pressure control. This could potentially prevent 9 cardiovascular events in the CKD group, translating to a cost saving of £320,000 for the 20 practices involved. The most significant change in clinical markers occurred during cycle 1 of the audit, the improvement was maintained throughout cycle 2 of the audit. Our results show the real-life clinical impact of a relatively simple and easy to implement QI project, to help improve outcomes in patients with CKD. This was achieved through more

  19. Three fuzzy reasoning models as a decision suport aid, to find an electrical energy tariff

    Directory of Open Access Journals (Sweden)

    Daniela GHINITA

    2005-12-01

    Full Text Available This contribution is a laboratory-work developed as an example of approximate (fuzzy reasoning for students, possible to be used as a decision – support to estimate an electrical energy (EE price for consumers. The three fuzzy tariff estimation models that are developed, integrate not only the S.C Electrica S.A.-single-supplier rate position, but and some (social constraints/ compulsions of National Authority of Settlements from Energy (NASE beginning with 1999, in this transition period from Romania. Although is possible, the paper not refer to a partial-price concrete case (internal tariff used in certain year, production price, transport price, distribution price, spot price, or an external price to be sold electrical energy, etc. This “laboratory-work-paper” shows how, by changing the parameters of S.C Electrica S.A. and NASE, it is possible to can perform sensitivity tests on the tariff function model, until can obtain an acceptable and true price. In this aim, the three fuzzy models use different rules for pricing: conservative, aggressive, and different order of words concerning the rules respectively, finally doing a comparation among prices and models. The paper not finished all fuzzy possibilities (rules which can influences the expected value of a some EE tariff but, with certitude, can create a discussion base, about the way of approximate/ fuzzy reasoning, as a modality to find and to refine an EE price.

  20. Uncertainty Management of Dynamic Tariff Method for Congestion Management in Distribution Networks

    DEFF Research Database (Denmark)

    Huang, Shaojun; Wu, Qiuwei; Cheng, Lin

    2016-01-01

    The dynamic tariff (DT) method is designed for the distribution system operator (DSO) to alleviate congestions that might occur in a distribution network with high penetration of distributed energy resources (DERs). Uncertainty management is required for the decentralized DT method because the DT...

  1. Real Time Emulation of Dynamic Tariff for Congestion Management in Distribution Networks

    DEFF Research Database (Denmark)

    Rasmussen, Theis Bo; Wu, Qiuwei; Huang, Shaojun

    2016-01-01

    This paper presents the real time evaluation of the dynamic tariff (DT) method for alleviating congestion in a distribution networks with high penetration of distributed energy resources (DERs). The DT method is implemented in a real time digital testing platform that emulates a real distribution...

  2. Environmental, economic, and social impacts of feed-in tariffs : A Portuguese perspective 2000–2010

    NARCIS (Netherlands)

    Behrens, P.A.; Rodrigues, J.D.F.; Bras, T.; Silva, C.

    2016-01-01

    Over the past two decades, many countries have used aggressive policies such as feed-in tariffs and power purchase agreements to promote renewable energy. These policies have been very successful in several countries, initiating large changes in the structure of energy sectors, and conferring large

  3. On the Effectiveness of Feed-in Tariffs in the Development of Photovoltaic Solar

    NARCIS (Netherlands)

    E. Dijkgraaf (Elbert); T. van Dorp (Tom); E. Maasland (Emiel)

    2014-01-01

    markdownabstract__Abstract__ Growing concern for climate change and rising scarcity of fossil fuels prompted governments to stimulate the development of renewables. This paper empirically tests whether feed-in tariff (FIT) policies have been effective in the development of photovoltaic solar

  4. On the Effectiveness of Feed-in Tariffs in the Development of Photovoltaic Solar

    NARCIS (Netherlands)

    E. Dijkgraaf (Elbert); T. van Dorp (Tom); E. Maasland (Emiel)

    2014-01-01

    markdownabstract__Abstract__ Growing concern for climate change and rising scarcity of fossil fuels prompted governments to stimulate the development of renewables. This paper empirically tests whether feed-in tariff (FIT) policies have been effective in the development of photovoltaic solar (PV),

  5. 75 FR 420 - Receipt of Domestic Interested Party Petition Concerning the Tariff Classification of Wickless...

    Science.gov (United States)

    2010-01-05

    ... FURTHER INFORMATION CONTACT: Jean-Rene Broussard, Tariff Classification and Marking Branch, Regulations... contain a wick. Item 4 is a blue and white colored solid wax molded hexagon that measures approximately 1...\\'' in height and 2\\3/ 4\\'' wide. The block is blue and white colored and does not have a hole...

  6. Net metering and net feed-in tariff for embedded solar PV in South Africa

    CSIR Research Space (South Africa)

    Bischof-Niemz, T

    2015-01-01

    Full Text Available and maintaining the distribution grid, as well as cost of metering and billing. The CSIR Energy Centre therefore developed a Net Feed-in Tariff (NETFIT) concept in which electricity distributors are made financially indifferent to embedded PV, and in which...

  7. Cost Reduction Ability by Electricity Tariff Selection for Construction Facilities Located in Non-price Areas

    Directory of Open Access Journals (Sweden)

    Makasheva Svetlana

    2016-01-01

    Full Text Available State of the art in the tariff type selection in the retail and the wholesale electricity market for construction or reconstruction facilities located at Far East are considered. As a management solution the electricity tariff’s selection for enterprises at stage of construction or reconstruction is accented.

  8. General Agreement on Tariff and Trade Negotiations: A Computer-Based Simulation.

    Science.gov (United States)

    Manrique, Gabriel G.

    This paper recommends the use of a computer simulation about trade and tariff negotiations to reinforce and apply principles learned in undergraduate international trade courses and to provide students with an opportunity to use the advanced features of Symphony, a computer spreadsheet. This simulation is a game in which both the class and…

  9. 19 CFR 181.52 - Subsequent claims for preferential tariff treatment.

    Science.gov (United States)

    2010-04-01

    ... SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) NORTH AMERICAN FREE TRADE AGREEMENT Restrictions on Drawback and Duty-Deferral Programs § 181.52 Subsequent claims for preferential tariff treatment. If a... 19 Customs Duties 2 2010-04-01 2010-04-01 false Subsequent claims for preferential...

  10. 78 FR 17394 - Filing via the Internet; Electronic Tariff Filings; Revisions to Electric Quarterly Report Filing...

    Science.gov (United States)

    2013-03-21

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Filing via the Internet; Electronic Tariff Filings; Revisions to Electric Quarterly Report Filing Process; Notice of Technical Conference Take notice that on April 16, 2013,...

  11. Individual Tariffs for Mobile Services: Analysis of Operator Business and Risk Consequences

    NARCIS (Netherlands)

    H. Chen (Hong); L-F. Pau (Louis-François)

    2007-01-01

    textabstractA design approach is offered for individual tariffs for mass customized mobile service products, whereby operators can determine their contract acceptance rules to guarantee with a set probability their minimum profit and risk levels. It uses realistic improvements to earlier reported ne

  12. Day-ahead tariffs for the alleviation of distribution grid congestion from electric vehicles

    DEFF Research Database (Denmark)

    O'Connell, Niamh; Wu, Qiuwei; Østergaard, Jacob

    2012-01-01

    An economically efficient day-ahead tariff (DT) is proposed with the purpose of preventing the distribution grid congestion resulting from electric vehicle (EV) charging scheduled on a dayahead basis. The DT concept developed herein is derived from the locational marginal price (LMP), in particular...

  13. Retrofit NO{sub x} controls for utility boilers: a synthesis of technologies, issues, and CAAA ozone attainment legislation: Final report 1993

    Energy Technology Data Exchange (ETDEWEB)

    Eskmazi, D.; Cichanowicz, E.; Kokkinos, A.; Stallings, J.; Offen, G. [Electric Power Research Institute, Palo Alto, CA (United States)

    1993-10-01

    This document brings together a set of summary papers on the status of NO{sub x} control technologies for complying with the requirements of the Clean Air Act Amendments (CAAA) of 1990. The individual papers were prepared in mid 1992 as synthesized information for utilities who were beginning to assess their compliance options and enter discussions with their regulatory agencies. Their purpose is to introduce utility engineers and managers, regulators, and the public to the available NO{sub x} reduction options, and to do so in a manner that allows complete and consistent discussions of their performance and potential impacts. They do this by identifying the technologies; presenting their general development status; noting the expected range of NO{sub x} emissions; showing projected costs for each system; describing the various technology, fuel and boiler design factors that contribute to the large span of these ranges; and indicating power plant impacts that may be experienced when applying these controls. These documents are not detailed technical prescriptions for supporting designs or technology selections. All three technology papers focus on retrofit controls, since this is the NO{sub x} compliance issue of greatest urgency to utilities at this time.

  14. Overview of the energy research and development program of the Federal Republic of Germany with special attention to coal utilization technology

    Energy Technology Data Exchange (ETDEWEB)

    Holighaus, R.

    1980-01-01

    The objectives, the content and the finding of the Energy Research and Development Program are outlined with special attention to coal utilization technology. The largest part of the program is borne by the Federal Ministry for Research and Technology. The distribution of pending program shows clearly the priority for 'Coal and other fossil sources' which in fact means coal, the only large domestic energy source. The development activities are divided into following sections (in the order of financial priority): electricity generation from coal, gas generation from coal, liquefaction of coal, coal production and direct combustion. The different development strategies which are applied in the individual fields of coal utilization are discussed in detail. Several newly developed technologies are now, or in the near future, ready for commercial application. From the developments the Federal Government also expects to increase the attractivity of German industries as partners of joint ventures with countries having large coal deposits.

  15. Improving Nigerian health policymakers' capacity to access and utilize policy relevant evidence: outcome of information and communication technology training workshop.

    Science.gov (United States)

    Uneke, Chigozie Jesse; Ezeoha, Abel Ebeh; Uro-Chukwu, Henry; Ezeonu, Chinonyelum Thecla; Ogbu, Ogbonnaya; Onwe, Friday; Edoga, Chima

    2015-01-01

    Information and communication technology (ICT) tools are known to facilitate communication and processing of information and sharing of knowledge by electronic means. In Nigeria, the lack of adequate capacity on the use of ICT by health sector policymakers constitutes a major impediment to the uptake of research evidence into the policymaking process. The objective of this study was to improve the knowledge and capacity of policymakers to access and utilize policy relevant evidence. A modified "before and after" intervention study design was used in which outcomes were measured on the target participants both before the intervention is implemented and after. A 4-point likert scale according to the degree of adequacy; 1 = grossly inadequate, 4 = very adequate was employed. This study was conducted in Ebonyi State, south-eastern Nigeria and the participants were career health policy makers. A two-day intensive ICT training workshop was organized for policymakers who had 52 participants in attendance. Topics covered included: (i). intersectoral partnership/collaboration; (ii). Engaging ICT in evidence-informed policy making; use of ICT for evidence synthesis; (iv) capacity development on the use of computer, internet and other ICT. The pre-workshop mean of knowledge and capacity for use of ICT ranged from 2.19-3.05, while the post-workshop mean ranged from 2.67-3.67 on 4-point scale. The percentage increase in mean of knowledge and capacity at the end of the workshop ranged from 8.3%-39.1%. Findings of this study suggest that policymakers' ICT competence relevant to evidence-informed policymaking can be enhanced through training workshop.

  16. Rational utilization of energy applications in the facility management. Energy efficient system technologies of the ventilation technology, air conditioning technology, refrigeration technology and lighting technology. Plant concepts, applications and practical tips; Rationelle Energieanwendungen in der Gebaeudetechnik. Energieeffiziente Systemtechnologien der Raumluft-, Klima-, Kaelte-, und Beleuchtungstechnik. Anlagenkonzepte, Anwendungen, Praxistipps

    Energy Technology Data Exchange (ETDEWEB)

    Theiss, Eric

    2012-11-01

    Due to increasing energy prices and increasingly scarce resources, existing energy-intensive systems of the ventilation technology, air conditioning technology, refrigeration technology as well as lighting technology have to be reconsidered. Innovative approaches have to be developed. Under this aspect, the author of the book under consideration describes functional principles and variants of utilization as well as innovations and prototypes in this area. The optimisation of the energy efficiency and the increase of the user comfort are illustrated by means of the building automation. With respect to the actual regulations, the characteristic parameters are examined. Economic feasibility studies are performed. By way of illustration, possible system integrations are described on the basis of example plants and object descriptions. The author of this book also presents a glossary and the most important contact addresses. The book under consideration is an ideal advisor for architects, building owners, investors, specialist engineers, energy consultants and students.

  17. Changes in the energy utility market and the role of information technology. Het veranderingsproces in de Nutsmarkt en de rol van informatietechnologie

    Energy Technology Data Exchange (ETDEWEB)

    Bonke, V. (Digital Equipment BV, Rotterdam (Netherlands))

    1993-11-01

    An overview is given of some of the major business issues in the Dutch energy utilities sector and their implications for the information technology (IT) sector. Attention is paid to concentration and integration, liberalization, energy savings and the environment, and a customer-oriented approach. The implications of these developments for the IT are described for three subjects: applications, infrastructure and systems. Furthermore a brief description is given of the Digital Equipment Corporation (DEC) in the worldwide utility industry, as well as a brief introduction on a multi-vendor application/integration framework, called DECunity. 2 figs.

  18. 渔船动力余热制冷技术%Refrigeration Technology Utilizing Engine Waste Heat in Fishing Vessels

    Institute of Scientific and Technical Information of China (English)

    陈少杰; 陈光明

    2014-01-01

    Ice and compression refrigeration are normally used to preserve caught fish on fishing vessels.At the same time, waste heat dissipated in hot exhaust gas on fishing vessels is rejected to the atmosphere.Utilizing the vast amount of the waste energy for refrigeration is both economical and energy saving.Three kinds of heat driven refrigeration cycles as adsorption, absorption and ejection are introduced in this paper.Advantages and disadvantages of the three cycles are analyzed based on the working condition of ice making on fishing ves_sels.Emphases have been made on the feasibility of transforming the existing compression refrigeration cycle on fishing vessels by ejection technology.The result shows that 54.5﹪ of fuel for refrigeration system can be saved after combining ejection and compression cycle and the transforming cost can be recovered in 1 year.%渔船通常需要带冰或使用压缩式制冷来满足渔获冷藏保鲜的需要,而渔船发动机尾气中有大量的热能被排放到环境中去,利用渔船发动机尾气余热制冷是一种既经济又节能的好方法。本文介绍了吸附式﹑吸收式和喷射式三种热能驱动的制冷循环,并针对渔船制冰工况对这三种循环在渔船中应用的优缺点进行了分析;重点讨论了使用喷射式制冷技术对渔船现有压缩式制冷系统进行改造的可行性。研究结果表明,将喷射制冷与压缩制冷结合,可减少渔船制冷系统燃料消耗54.5﹪,在1年内即可收回改造成本。

  19. ASSESSING TAXPAYER BEHAVIOR IN UTILIZING E-FILLING TAX SYSTEM WITH THE PERSPECTIVE OF TECHNOLOGY ACCEPTANCE MODEL AND THE THEORY OF PLANNED BEHAVIOR

    Directory of Open Access Journals (Sweden)

    Maharani H.

    2017-07-01

    Full Text Available This study aims to assess the factors which influence taxpayer behavior in utilizing e-filling tax system. This study combines Technology Acceptance Model and the Theory of Planned Behavior. The data was collected through a survey method. It took 100 respondents of the personal taxpayers of the Pratama Gresik Utara tax office's employee in utilizing the e-filing to submit their tax return. In order to assess the data, the researchers used Partial Least Square statistical method. The finding shows that the intention construct has a positive influence over the e-filling utilization behavior. Behavioral control has a positive influence over the behavior through the e-filing utilization intention. Easy of use, purpose, attitude, subjective norm, and behavioral control have a positive influence over the e-filing utilization intention. Credibility has a negative influence over the e-filing utilization intention. This study involved the Application Service Provider, Directorate General of Taxes, and KPP Pratama which have to more pay attention the behavior, intention, easy of use, purpose, attitude, subjective norm, and behavioral control of the taxpayer.

  20. 77 FR 45599 - CED Rock Springs, Inc.; Supplemental Notice That Revised Market-Based Rate Tariff Filing Includes...

    Science.gov (United States)

    2012-08-01

    ...-2546-000; ER02-2546-001] CED Rock Springs, Inc.; Supplemental Notice That Revised Market- Based Rate... above-referenced proceeding of CED Rock Springs, Inc.'s tariff revision filing, noting that such...

  1. 47 CFR 61.49 - Supporting information to be submitted with letters of transmittal for tariffs of carriers...

    Science.gov (United States)

    2010-10-01

    ... estimates. (i) A study containing a projection of costs for a representative 12 month period; and (ii... previously offered, the Chief, Tariff and Pricing Analysis Branch must be provided two sets of working...

  2. A case study review of technical and technology issues for transition of a utility load management program to provide system reliability resources in restructured electricity markets

    Energy Technology Data Exchange (ETDEWEB)

    Weller, G.H.

    2001-07-15

    Utility load management programs--including direct load control and interruptible load programs--were employed by utilities in the past as system reliability resources. With electricity industry restructuring, the context for these programs has changed; the market that was once controlled by vertically integrated utilities has become competitive, raising the question: can existing load management programs be modified so that they can effectively participate in competitive energy markets? In the short run, modified and/or improved operation of load management programs may be the most effective form of demand-side response available to the electricity system today. However, in light of recent technological advances in metering, communication, and load control, utility load management programs must be carefully reviewed in order to determine appropriate investments to support this transition. This report investigates the feasibility of and options for modifying an existing utility load management system so that it might provide reliability services (i.e. ancillary services) in the competitive markets that have resulted from electricity industry restructuring. The report is a case study of Southern California Edison's (SCE) load management programs. SCE was chosen because it operates one of the largest load management programs in the country and it operates them within a competitive wholesale electricity market. The report describes a wide range of existing and soon-to-be-available communication, control, and metering technologies that could be used to facilitate the evolution of SCE's load management programs and systems to provision of reliability services. The fundamental finding of this report is that, with modifications, SCE's load management infrastructure could be transitioned to provide critical ancillary services in competitive electricity markets, employing currently or soon-to-be available load control technologies.

  3. Examination of the factors and issues for an environmental technology utilization partnership between the private sector and the Department of Energy. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Brouse, P.

    1997-05-01

    The Department of Energy (DOE) held a meeting on November 12, 1992 to evaluate the DOE relations with industry and university partners concerning environmental technology utilization. The goal of this meeting was to receive feedback from DOE industry and university partners for the identification of opportunities to improve the DOE cooperative work processes with the private sector. The meeting was designed to collect information and to turn that information into action to improve private sector partnerships with DOE.

  4. CUSTOMS AND TARIFF REGULATION AS AN INSTRUMENT OF SUPPORT FOR THE AGRICULTURAL COMPLEX OF THE KRASNODAR REGION

    Directory of Open Access Journals (Sweden)

    Zielinskaya M. V.

    2014-12-01

    Full Text Available One of the measures of indirect state support for domestic agricultural producer is a tariff policy, which is a key factor determining the national trade regimes and the conditions of admission of foreign products to domestic sales. The study agricultural imports in the Krasnodar region in the article are encouraged to use the weighted and substantiated by the specificity of the current state of the domestic economy tariff quotas and duties on imports of agricultural products

  5. Cloud Pedagogy: Utilizing Web-Based Technologies for the Promotion of Social Constructivist Learning in Science Teacher Preparation Courses

    Science.gov (United States)

    Barak, Miri

    2017-01-01

    The new guidelines for science education emphasize the need to introduce computers and digital technologies as a means of enabling visualization and data collection and analysis. This requires science teachers to bring advanced technologies into the classroom and use them wisely. Hence, the goal of this study was twofold: to examine the…

  6. Congestion management of distribution networks with day-ahead dynamic grid tariffs

    DEFF Research Database (Denmark)

    Huang, Shaojun; Wu, Qiuwei

    vehicles (EV) and heat pumps (HP), will be largely deployed in electrical distribution networks. Congestion management will be important in the future active distribution networks. In the IDE4L project, work package 5 is dedicated to develop different kinds of congestion management methods. Demand response......In order to reduce CO2 emissions and alleviate the global warming issue, many countries are setting goals to increase the percentage of renewable energy in the total energy consumption. In this process, a large number of distributed energy resources (DER), distributed generation (DG), electric...... (DR) is one of the important methods. In this report, as one task of work package 5, the day-ahead dynamic tariff (DADT) method for congestion management in distribution networks is presented. The dynamic tariff (DT) can motivate the flexible demands (EV and HP) to shift their energy consumption...

  7. Feed-in Tariff Policy: Design, Implementation, and RPS Policy Interactions

    Energy Technology Data Exchange (ETDEWEB)

    Cory, K.; Couture, T.; Kreycik, C.

    2009-03-01

    Feed-in tariff (FIT) policies are implemented in more than 40 countries around the world and are cited as the primary reason for the success of the German and Spanish renewable energy markets. As a result of that success, FIT policy proposals are starting to gain traction in several U.S. states and municipalities. Experience from Europe is also beginning to demonstrate that properly designed FITs may be more cost-effective than renewable portfolio standards (RPS), which make use of competitive solicitations. This article explores the design and operation of feed-in tariff policies, including a FIT policy definition, payment-structure options, and payment differentiation. The article also touches on the potential interactions between FIT policies and RPS policies at the state level.

  8. Studying the Effects of Non-Tariff Barriers on the Export of the Main Agricultural Products of Iran

    Directory of Open Access Journals (Sweden)

    Z. Ardakani

    2009-01-01

    Full Text Available Problem statement: As trade agreements decrease tariffs throughout the world, other barriers to trade emerge. These Non-Tariff Barriers (NTBs can be just as troublesome as tariffs for exporting countries. NTBs include any of a number of hindrances that restrict the ability of companies to export. NTBs may now have a greater impact on trade than tariffs. Approach: In contrast with previous research, we used a gravity model to estimate the trade effect of non-tariff barriers imposed by importer countries on pistachios, raisins and shrimp exported by Iran. Results: NTBs had a negative impact on pistachio and shrimp exports and their effect was greater than that of tariffs; raisin exports were unaffected by NTBs. Conclusion/Recommendations: The export and the world demand for agricultural products increasing focusing on quality, packaging, labeling and standards of products. Policy makers in countries that export agricultural products, such as Iran, must consider these characteristics when designing their programs. Therefore, if Iran builds up-to-date production systems, it will increase its exports of agricultural products.

  9. Integrated Electricity Planning Comprise Renewable Energy and Feed-In Tariff

    OpenAIRE

    Ho Wai Shin; Haslenda Hashim

    2012-01-01

    Problem statement: Mitigation of global warming and energy crisis has called upon the need of an efficient tool for electricity planning. This study thus presents an electricity planning tool that incorporates RE with Feed in-Tariff (FiT) for various sources of Renewable Energy (RE) to minimize grid-connected electricity generation cost as well as to satisfy nominal electricity demand and CO2 emission reduction target. Approach: In order to perform these tasks, a general Mixed Integer Linear ...

  10. On a Strategy to Develop Robust and Simple Tariffs from Motor Vehicle Insurance Data

    Institute of Scientific and Technical Information of China (English)

    Andreas Christmann

    2005-01-01

    The goals of this paper are twofold: we describe common features in data sets from motor vehicle insurance companies and we investigate a general strategy which exploits the knowledge of such features. The results of the strategy are a basis to develop insurance tariffs. We use a nonparametric approach based on a combination of kernel logistic regression and ε-support vector regression which both have good robustness properties. The strategy is applied to a data set from motor vehicle insurance companies.

  11. The impact of further tariff reduction on the EU sugar sector in the forthcoming multilateral round

    Directory of Open Access Journals (Sweden)

    E. HUAN-NIEMI

    2008-12-01

    Full Text Available This paper indicates the need for reform in the EU sugar sector due to the erosion of "border protection" in the view of further reduction in import tariffs for sugar. Three tariff reduction methods are assessed to project the "border protection" for EU sugar: Swiss formula proposed by the Cairns Group, "Harbinson" Proposal by the World Trade Organization and Uruguay Round formula proposed by the EU. In the assumed forthcoming multilateral round for agriculture, the EU would need to lower the support price for sugar by 67%, if the Cairns Group tariff reduction method is used. However, if the "Harbinson" method is used, the EU would need to lower the support price for sugar by at least 35%. On the contrary, the EU may avoid lowering the support price for sugar with three conditions occurring simultaneously: 1 the Uruguay Round formula is used as the reduction method in the assumed new WTO round and the EU can use the minimum reduction rate of 15% for sugar

  12. Assessing DRG cost accounting with respect to resource allocation and tariff calculation: the case of Germany.

    Science.gov (United States)

    Vogl, Matthias

    2012-08-30

    The purpose of this paper is to analyze the German diagnosis related groups (G-DRG) cost accounting scheme by assessing its resource allocation at hospital level and its tariff calculation at national level. First, the paper reviews and assesses the three steps in the G-DRG resource allocation scheme at hospital level: (1) the groundwork; (2) cost-center accounting; and (3) patient-level costing. Second, the paper reviews and assesses the three steps in G-DRG national tariff calculation: (1) plausibility checks; (2) inlier calculation; and (3) the "one hospital" approach. The assessment is based on the two main goals of G-DRG introduction: improving transparency and efficiency. A further empirical assessment attests high costing quality. The G-DRG cost accounting scheme shows high system quality in resource allocation at hospital level, with limitations concerning a managerially relevant full cost approach and limitations in terms of advanced activity-based costing at patient-level. However, the scheme has serious flaws in national tariff calculation: inlier calculation is normative, and the "one hospital" model causes cost bias, adjustment and representativeness issues. The G-DRG system was designed for reimbursement calculation, but developed to a standard with strategic management implications, generalized by the idea of adapting a hospital's cost structures to DRG revenues. This combination causes problems in actual hospital financing, although resource allocation is advanced at hospital level.

  13. Assessing DRG cost accounting with respect to resource allocation and tariff calculation: the case of Germany

    Science.gov (United States)

    2012-01-01

    The purpose of this paper is to analyze the German diagnosis related groups (G-DRG) cost accounting scheme by assessing its resource allocation at hospital level and its tariff calculation at national level. First, the paper reviews and assesses the three steps in the G-DRG resource allocation scheme at hospital level: (1) the groundwork; (2) cost-center accounting; and (3) patient-level costing. Second, the paper reviews and assesses the three steps in G-DRG national tariff calculation: (1) plausibility checks; (2) inlier calculation; and (3) the “one hospital” approach. The assessment is based on the two main goals of G-DRG introduction: improving transparency and efficiency. A further empirical assessment attests high costing quality. The G-DRG cost accounting scheme shows high system quality in resource allocation at hospital level, with limitations concerning a managerially relevant full cost approach and limitations in terms of advanced activity-based costing at patient-level. However, the scheme has serious flaws in national tariff calculation: inlier calculation is normative, and the “one hospital” model causes cost bias, adjustment and representativeness issues. The G-DRG system was designed for reimbursement calculation, but developed to a standard with strategic management implications, generalized by the idea of adapting a hospital’s cost structures to DRG revenues. This combination causes problems in actual hospital financing, although resource allocation is advanced at hospital level. PMID:22935314

  14. Deriving time discounting correction factors for TTO tariffs.

    Science.gov (United States)

    Attema, Arthur E; Brouwer, Werner B F

    2014-04-01

    The Time Trade-off (TTO) method is a popular method for valuing health state utilities and is frequently used in economic evaluations. However, this method produces utilities that are distorted by several biases. One important bias entails the failure to incorporate time discounting. This paper aims to measure time discounting for health outcomes in a sample representative for the general population. In particular, we estimate TTO scores alongside time discounting in order to derive a set of correction factors that can be employed to correct raw TTO scores for the downward bias caused by time discounting. We find substantial positive correction factors, which are increasing with the severity of the health state. Furthermore, higher discounting is found when using more severe health states in the discounting elicitation task. More research is needed to further develop discount rate elicitation procedures and test their validity, especially in general public samples. Moreover, future research should investigate the correction of TTO values for other biases as well, such as loss aversion, and to develop a criterion to test the external validity of TTO scores.

  15. Public acceptance of the utilization of nuclear technology. Necessity of using the system which is similar to that of the ISO14001

    Energy Technology Data Exchange (ETDEWEB)

    Kurata, Kenji; Kanda, Keiji [Graduate School of Energy Science, Kyoto University, Kyoto (Japan)

    2001-05-01

    Safety itself is a key factor in enhancing public acceptance of the utilization of nuclear technology. At the same time, it is indispensable for businesses using nuclear technology to foster public trust by being regarded as 'companies which are making serious efforts to attain higher level of safety'. However, recent nuclear accidents related to the MONJU plant and JCO have seriously hampered this trust. Based on the above understanding, this paper uses the ISO14001 framework to consider a possible solution to recover public trust. An examination of the ISO14001 shows that it is seen as a framework to prove to the outside world that the party in question is reliable in terms of behaving in an environmentally sound manner. Accordingly, their must be a possibility for businesses using a nuclear technology to be able to use the ideas of the framework in terms of safety instead of the environment. (author)

  16. Development of an Advanced Deshaling Technology to Improve the Energy Efficiency of Coal Handling, Processing, and Utilization Operations

    Energy Technology Data Exchange (ETDEWEB)

    Rick Honaker; Gerald Luttrell

    2007-09-30

    The concept of using a dry, density-based separator to achieve efficient, near-face rock removal, commonly referred to as deshaling, was evaluated in several applications across the U.S.. Varying amounts of high-density rock exist in most run-of-mine feed. In the central Appalachian coalfields, a rock content exceeding 50% in the feed to a preparation plant is commonplace due to high amounts of out-of-seam dilution made necessary by extracting coal from thin seams. In the western U.S, an increase in out-of-seam dilution and environmental regulations associated with combustion emissions have resulted in a need to clean low rank coals and dry cleaning may be the only option. A 5 ton/hr mobile deshaling unit incorporating a density-based, air-table technology commercially known as the FGX Separator has been evaluated at mine sites located within the states of Utah, Wyoming, Texas, West Virginia, Virginia, Pennsylvania and Kentucky. The FGX technology utilizes table riffling principles with air as the medium. Air enters through the table and creates a fluidized bed of particles comprised of mostly fine, high density particles. The high density particle bed lifts the low-density coal particles to the top of the bed. The low-density coal moves toward the front of the table due to mass action and the downward slope of the table. The high-density particles settle through the fluidized particle bed and, upon making contact with the table, moves toward the back of the table with the assistance of table vibration. As a result, the low-density coal particles exit the front of the table closest to the feed whereas the high-density, high-ash content particles leave on the side and front of the table located at the farthest from the feed entry. At each test site, the run-of-mine feed was either directly fed to the FGX unit or pre-screened to remove the majority of the -6mm material. The surface moisture of the feed must be maintained below 9%. Pre-screening is required when the

  17. THE UTILIZATION OF WEB-BASED TECHNOLOGY AS PREDICTOR OF FACULTY INSIGHTS OF SUPPORT FOR THE IMPLEMENTATION OF ELEARNING

    Directory of Open Access Journals (Sweden)

    Hamed GHAEMI

    2011-01-01

    Full Text Available For the last three decades higher education institutions have been forced to undergo thorough transformation and revitalization. Parallel to society, a factor that has played a crucial role in transforming higher education is the advance of information technology (IT. The potential for use of IT in education has been increasingly recognized and higher education faculties have begun to use this technology in different ways in their teaching. Instructors today regularly include electronic technologies that extend instructional resources to their students: threaded discussion boards, websites, chat rooms, email, newsgroups, etc. Moreover, because the use of mobile technologies that join with web-based resources is becoming a more common practice, the lines differentiating web-based and face-to-face classroom teaching are becoming less distinguishable.

  18. High-Efficiency, Ka-band Solid-State Power Amplifier Utilizing GaN Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — QuinStar Technology proposes to develop an efficient, solid-state power amplifier (SSPA), operating at Ka-band frequencies, for high data rate, long range space...

  19. Report on the results of research and development under a consignment from NEDO of glycoconjugate production utilizing technologies. Development of technologies to fix and effectively utilize carbon dioxide by applying glycoconjugates; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Fukugo toshitsu seisan riyo gijutsu no kenkyu kaihatsu (fukugo toshitsu oyo nisanka tanso koteika yuko riyo gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper reports research results in fiscal 1997 for the `research and development of glycoconjugate production utilizing technologies`. In synthesizing, utilizing and remodeling technologies for glycoconjugates by means of chemical synthesis, studies were performed on developing methods to synthesize Gal {beta}1-3Gal NA(c {alpha})1-0-Serine in preparative scale, synthesizing high mannose type sugars of natural type without protection groups, and linking GlcNA or GalNAc onto partial peptide of fibroblast growth factor (FGF). In synthesizing, utilizing and remodeling technologies for glycoconjugates by using biological methods, studies were carried out, with regard to glycoconjugate synthesizing, utilizing and remodeling technologies utilizing animal cells, on identifying sugar structures of IFN-{gamma} produced from CHO cell line, and isolating CHO cell lines introduced with genes of sugar transferred enzyme GnTIV and/or GnTV. Furthermore, studies were conducted on glycoconjugate synthesizing, utilizing and remodeling technologies utilizing microorganisms, and glycoconjugate structure analyzing technologies. In addition, overall investigation was made on glycoconjugate production utilizing technologies. 113 refs., 76 figs., 18 tabs.

  20. Utilization and costs of glucose lowering therapies following health technology assessment for the new reimbursement scheme in Sweden.

    Science.gov (United States)

    Pettersson, Billie; Hoffmann, Mikael; Andersson, David; Wändell, Per; Levin, Lars-Åke

    2012-12-01

    A new reimbursement scheme (RS) for glucose lowering therapies (GLT) was implemented in Sweden on March 1, 2010. Products on the market were retained, restricted, excluded or excluded for new courses in the new RS. The aim of this study was to compare utilization and costs of GLT for type 2 diabetes Mellitus (T2DM) before and after the implementation of the changed RS. This was a quasi-experimental study using data on dispensed GLT and costs from a database on dispensed individual based prescriptions in Sweden. Segmented regression analyses were used to assess utilization and costs. Following the changed reimbursement status, there was an accelerated increasing trend in number of patients treated with restricted (P=0.0007) or retained (P=0.0021) insulins, as well as in costs for insulin based GLT (P=0.0014). No impact was detected in the total number of patients treated with oral GLT, but a slightly negative trend in total costs for oral GLT was detected following the intervention (P=0.0177). The new reimbursement scheme had a minor impact on utilization and costs of oral GLT. Despite restricted reimbursement for patients with T2DM, the utilization of insulin based GLT and related costs increased faster following the intervention. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.