Situation analysis of the knowledge, competencies and skill requirements of jobs in renewable energy technologies in Canada

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

This paper described the technological and marketing challenges of developing Canada's vast renewable energy sources. Canada's basic educational infrastructure provides a good foundation for developing renewable energy technologies in the coming decade. The following renewable energy technologies were highlighted: photovoltaic power systems; wind power systems; micro and small hydro power systems; solar air heating systems; solar water heating systems; biomass combustion systems; and, geothermal ground source heat pump systems. Each renewable technology has its own set of requirements that may differ from traditional technologies. The labour market needs and human resource considerations for these seven renewable energy technology industries were outlined. One of the main challenges lies in preparing technicians in renewable energy technologies and ensuring the availability of appropriate labour sources in relation to demand. Observations on training in renewable energies were also summarized with reference to typical jobs available within each sector, job description for each technology, qualifications and the required knowledge, skills and aptitudes for each industry. A list of Canadian company contacts by technology area was included. refs.

Environmental control and life support system requirements and technology needs for advanced manned space missions

Science.gov (United States)

Powell, Ferolyn T.; Sedej, Melaine; Lin, Chin

1987-01-01

NASA has completed an environmental control and life support system (ECLSS) technology R&D plan for advanced missions which gave attention to the drivers (crew size, mission duration, etc.) of a range of manned missions under consideration. Key planning guidelines encompassed a time horizon greater than 50 years, funding resource requirements, an evolutionary approach to goal definition, and the funding of more than one approach to satisfy a given perceived requirement. Attention was given to the ECLSS requirements of transportation and service vehicles, platforms, bases and settlements, ECLSS functions and average load requirements, unique drivers for various missions, and potentially exploitable commonalities among vehicles and habitats.

Practical considerations in the development of hemoglobin-based oxygen therapeutics.

Science.gov (United States)

Kim, Hae Won; Estep, Timothy N

2012-09-01

The development of hemoglobin based oxygen therapeutics (HBOCs) requires consideration of a number of factors. While the enabling technology derives from fundamental research on protein biochemistry and biological interactions, translation of these research insights into usable medical therapeutics demands the application of considerable technical expertise and consideration and reconciliation of a myriad of manufacturing, medical, and regulatory requirements. The HBOC development challenge is further exacerbated by the extremely high intravenous doses required for many of the indications contemplated for these products, which in turn implies an extremely high level of purity is required. This communication discusses several of the important product configuration and developmental considerations that impact the translation of fundamental research discoveries on HBOCs into usable medical therapeutics.

Hydrogen tomorrow: Demands and technology requirements

Science.gov (United States)

1975-01-01

National needs for hydrogen are projected and the technologies of production, handling, and utilization are evaluated. Research and technology activities required to meet the projected needs are determined.

Shaft and tunnel sealing considerations

International Nuclear Information System (INIS)

Kelsall, P.C.; Shukla, D.K.

1980-01-01

Much of the emphasis of previous repository sealing research has been placed on plugging small diameter boreholes. It is increasingly evident that equal emphasis should now be given to shafts and tunnels which constitute more significant pathways between a repository and the biosphere. The paper discusses differences in requirements for sealing shafts and tunnels as compared with boreholes and the implications for seal design. Consideration is given to a design approach for shaft and tunnel seals based on a multiple component design concept, taking into account the requirements for retrievability of the waste. A work plan is developed for the future studies required to advance shaft and tunnel sealing technology to a level comparable with the existing technology for borehole sealing

Future mission opportunities and requirements for advanced space photovoltaic energy conversion technology

Science.gov (United States)

Flood, Dennis J.

1990-01-01

The variety of potential future missions under consideration by NASA will impose a broad range of requirements on space solar arrays, and mandates the development of new solar cells which can offer a wide range of capabilities to mission planners. Major advances in performance have recently been achieved at several laboratories in a variety of solar cell types. Many of those recent advances are reviewed, the areas are examined where possible improvements are yet to be made, and the requirements are discussed that must be met by advanced solar cell if they are to be used in space. The solar cells of interest include single and multiple junction cells which are fabricated from single crystal, polycrystalline and amorphous materials. Single crystal cells on foreign substrates, thin film single crystal cells on superstrates, and multiple junction cells which are either mechanically stacked, monolithically grown, or hybrid structures incorporating both techniques are discussed. Advanced concentrator array technology for space applications is described, and the status of thin film, flexible solar array blanket technology is reported.

Deep-sea mining: Economic, technical, technological, and environmental considerations for sustainable development

Digital Repository Service at National Institute of Oceanography (India)

Sharma, R.

investment of $1.95 billion as capital expenditure and $9 billion as operating expenditure for a single deep-sea mining venture. In view of high investment, technological challenges and economic considerations, private-public cooperation could be an effective...

29 CFR 1615.135 - Electronic and information technology requirements.

Science.gov (United States)

2010-07-01

... 29 Labor 4 2010-07-01 2010-07-01 false Electronic and information technology requirements. 1615... INFORMATION TECHNOLOGY § 1615.135 Electronic and information technology requirements. (a) Development, procurement, maintenance, or use of electronic and information technology.—When developing, procuring...

New advance in the research of post-remote sensing application technology. Series of 'proposition and consideration of post-remote sensing application technology'

International Nuclear Information System (INIS)

Liu Dechang; Ye Fawang

2005-01-01

Based on deep consideration in post-remote sensing application technology, this article pays more attention to its technological meaning. The application idea of post-remote sensing application technology to uranium exploration is also discussed. The proposition and research on new concept of post-remote sensing application technology is an important search and of important theoretical and practical significance to uranium exploration. (authors)

Recognition and categorization considerations for information assurance requirements development and speficication

Science.gov (United States)

Stytz, Martin R.; May, Michael; Banks, Sheila B.

2009-04-01

Department of Defense (DoD) Information Technology (IT) systems operate in an environment different from the commercial world, the differences arise from the differences in the types of attacks, the interdependencies between DoD software systems, and the reliance upon commercial software to provide basic capabilities. The challenge that we face is determining how to specify the information assurance requirements for a system without requiring changes to the commercial software and in light of the interdependencies between systems. As a result of the interdependencies and interconnections between systems introduced by the global information grid (GIG), an assessment of the IA requirements for a system must consider three facets of a system's IA capabilities: 1) the IA vulnerabilities of the system, 2) the ability of a system to repel IA attacks, and 3) the ability of a system to insure that any IA attack that penetrates the system is contained within the system and does not spread. Each facet should be assessed independently and the requirements should be derived independently from the assessments. In addition to the desired IA technology capabilities of the system, a complete assessment of the system's overall IA security technology readiness level cannot be accomplished without an assessment of the capabilities required of the system for its capability to recover from and remediate IA vulnerabilities and compromises. To allow us to accomplish these three formidable tasks, we propose a general system architecture designed to separate the system's IA capabilities from its other capability requirements; thereby allowing the IA capabilities to be developed and assessed separately from the other system capabilities. The architecture also enables independent requirements specification, implementation, assessment, measurement, and improvement of a system's IA capabilities without requiring modification of the underlying application software.

Computer Technology for Expediency Consideration of Transformer Switching-Off for Capital Repair

Directory of Open Access Journals (Sweden)

E. M. Farkhadzade

2011-01-01

Full Text Available The paper considers computer technologies for expediency consideration of worn-out transformer recovery in power systems. Methods for list preparation of transformers to be selected for capital repair, estimation of repair quality, control over execution of contractual obligations are presented in the paper.

Employer Requirements to Work during Emergency Responses: Key Ethics Considerations.

Science.gov (United States)

Rutkow, Lainie; Taylor, Holly A; Powell, Tia

2017-03-01

Local health departments and their employees are at the forefront of emergency preparedness and response. Yet, recent studies have found that some local public health workers are unwilling to report to work in a variety of disaster scenarios. This can greatly compromise a response, as many local health departments need "all hands on deck" to effectively meet increased demands. To address these concerns, local health departments have employed varied policy strategies to ensure that employees do report to work. After describing different approaches taken by local health departments throughout the United States, we briefly identify and explore key ethics considerations that arise for local health departments when employees are required to report to work for emergency responses. We then discuss how these ethics considerations may inform local health department practices intended to promote a robust emergency response.

Human factors and ergonomics in home care: Current concerns and future considerations for health information technology

Science.gov (United States)

Or, Calvin K.L.; Valdez, Rupa S.; Casper, Gail R.; Carayon, Pascale; Burke, Laura J.; Brennan, Patricia Flatley; Karsh, Ben-Tzion

2010-01-01

Sicker patients with greater care needs are being discharged to their homes to assume responsibility for their own care with fewer nurses available to aid them. This situation brings with it a host of human factors and ergonomic (HFE) concerns, both for the home care nurse and the home dwelling patient, that can affect quality of care and patient safety. Many of these concerns are related to the critical home care tasks of information access, communication, and patient self-monitoring and self-management. Currently, a variety of health information technologies (HITs) are being promoted as possible solutions to those problems, but those same technologies bring with them a new set of HFE concerns. This paper reviews the HFE considerations for information access, communication, and patients self-monitoring and self-management, discusses how HIT can potentially mitigate current problems, and explains how the design and implementation of HIT itself requires careful HFE attention. PMID:19713630

The epigenetic effects of assisted reproductive technologies: ethical considerations.

Science.gov (United States)

Roy, M-C; Dupras, C; Ravitsky, V

2017-08-01

The use of assisted reproductive technologies (ART) has increased significantly, allowing many coping with infertility to conceive. However, an emerging body of evidence suggests that ART could carry epigenetic risks for those conceived through the use of these technologies. In accordance with the Developmental Origins of Health and Disease hypothesis, ART could increase the risk of developing late-onset diseases through epigenetic mechanisms, as superovulation, fertilization methods and embryo culture could impair the embryo's epigenetic reprogramming. Such epigenetic risks raise ethical issues for all stakeholders: prospective parents and children, health professionals and society. This paper focuses on ethical issues raised by the consideration of these risks when using ART. We apply two key ethical principles of North American bioethics (respect for autonomy and non-maleficence) and suggest that an ethical tension may emerge from conflicting duties to promote the reproductive autonomy of prospective parents on one hand, and to minimize risks to prospective children on the other. We argue that this tension is inherent to the entire enterprise of ART and thus cannot be addressed by individual clinicians in individual cases. We also consider the implications of the 'non-identity problem' in this context. We call for additional research that would allow a more robust evidence base for policy. We also call upon professional societies to provide clinicians with guidelines and educational resources to facilitate the communication of epigenetic risks associated with ART to patients, taking into consideration the challenges of communicating risk information whose validity is still uncertain.

Decommissioning of reactor facilities (2). Required technology

International Nuclear Information System (INIS)

Yanagihara, Satoshi

2014-01-01

Decommissioning of reactor facilities was planned to perform progressive dismantling, decontamination and radioactive waste disposal with combination of required technology in a safe and economic way. This article outlined required technology for decommissioning as follows: (1) evaluation of kinds and amounts of residual radioactivity of reactor facilities with calculation and measurement, (2) decontamination technology of metal components and concrete structures so as to reduce worker's exposure and production of radioactive wastes during dismantling, (3) dismantling technology of metal components and concrete structures such as plasma arc cutting, band saw cutting and controlled demolition with mostly remote control operation, (3) radioactive waste disposal for volume reduction and reuse, and (4) project management of decommissioning for safe and rational work to secure reduction of worker's exposure and prevent the spreading of contamination. (T. Tanaka)

Fairness requires deliberation: the primacy of economic over social considerations

Science.gov (United States)

Hochman, Guy; Ayal, Shahar; Ariely, Dan

2015-01-01

While both economic and social considerations of fairness and equity play an important role in financial decision-making, it is not clear which of these two motives is more primal and immediate and which one is secondary and slow. Here we used variants of the ultimatum game to examine this question. Experiment 1 shows that acceptance rate of unfair offers increases when participants are asked to base their choice on their gut-feelings, as compared to when they thoroughly consider the available information. In line with these results, Experiments 2 and 3 provide process evidence that individuals prefer to first examine economic information about their own utility rather than social information about equity and fairness, even at the price of foregoing such social information. Our results suggest that people are more economically rational at the core, but social considerations (e.g., inequality aversion) require deliberation, which under certain conditions override their self-interested impulses. PMID:26106342

Fairness requires deliberation: the primacy of economic over social considerations.

Science.gov (United States)

Hochman, Guy; Ayal, Shahar; Ariely, Dan

2015-01-01

While both economic and social considerations of fairness and equity play an important role in financial decision-making, it is not clear which of these two motives is more primal and immediate and which one is secondary and slow. Here we used variants of the ultimatum game to examine this question. Experiment 1 shows that acceptance rate of unfair offers increases when participants are asked to base their choice on their gut-feelings, as compared to when they thoroughly consider the available information. In line with these results, Experiments 2 and 3 provide process evidence that individuals prefer to first examine economic information about their own utility rather than social information about equity and fairness, even at the price of foregoing such social information. Our results suggest that people are more economically rational at the core, but social considerations (e.g., inequality aversion) require deliberation, which under certain conditions override their self-interested impulses.

Fairness requires deliberation: The primacy of economic over social considerations

Directory of Open Access Journals (Sweden)

Guy eHochman

2015-06-01

Full Text Available While both economic and social considerations of fairness and equity play an important role in financial decision-making, it is not clear which of these two motives is more primal and immediate and which one is secondary and slow. Here we used variants of the ultimatum game to examine this question. Experiment 1 shows that acceptance rate of unfair offers increases when participants are asked to base their choice on their gut-feelings, as compared to when they thoroughly consider the available information. In line with these results, Experiments 2 and 3 provide process evidence that individuals prefer to first examine economic information about their own utility rather than social information about equity and fairness, even at the price of foregoing such social information. Our results suggest that people are more economically rational at the core, but social considerations (e.g., inequality aversion require deliberation, which under certain conditions override their self-interested impulses.

GENERAL CONSIDERATIONS ON REGULATIONS AND SAFETY REQUIREMENTS FOR QUADRICYCLES

Directory of Open Access Journals (Sweden)

Ana Pavlovic

2015-12-01

Full Text Available In recent years, a new class of compact vehicles has been emerging and wide-spreading all around Europe: the quadricycle. These four-wheeled motor vehicles, originally derived from motorcycles, are a small and fuel-efficient mean of transportation used in rural or urban areas as an alternative to motorbikes or city cars. In some countries, they are also endorsed by local authorities and institutions which support small and environmentally-friendly vehicles. In this paper, several general considerations on quadricycles will be provided including the vehicle classification, evolution of regulations (as homologation, driver licence, emissions, etc, technical characteristics, safety requirements, most relevant investigations, and other additional useful information (e.g. references, links. It represents an important and actual topic of investigation for designers and manufacturers considering that the new EU regulation on the approval and market surveillance of quadricycles will soon enter in force providing conclusive requirements for functional safety environmental protection of these promising vehicles.

Emerging Requirements for Technology Management: A Sector-based Scenario Planning Approach

Directory of Open Access Journals (Sweden)

Simon Patrick Philbin

2013-09-01

Full Text Available Identifying the emerging requirements for technology management will help organisations to prepare for the future and remain competitive. Indeed technology management as a discipline needs to develop and respond to societal and industrial needs as well as the corresponding technology challenges. Therefore, following a review of technology forecasting methodologies, a sector-based scenario planning approach has been used to derive the emerging requirements for technology management. This structured framework provided an analytical lens to focus on the requirements for managing technology in the healthcare, energy and higher education sectors over the next 5-10 years. These requirements include the need for new business models to support the adoption of technologies; integration of new technologies with existing delivery channels; management of technology options including R&D project management; technology standards, validation and interoperability; and decision-making tools to support technology investment.

Nuclear power technology requirements for NASA exploration missions

International Nuclear Information System (INIS)

Bloomfield, H.S.

1990-01-01

This paper discusses how future exploration of the Moon and Mars will mandate developments in many areas of technology. In particular, major advances will be required in planet surface power systems and space transportation systems. Critical nuclear technology challenges that can enable strategic self-sufficiency, acceptable operational costs and cost-effective space transportation goals for NASA exploration missions have been identified. Critical technologies for surface power systems include stationary and mobile nuclear reactor and radio-isotope heat sources coupled to static and dynamic power conversion devices. These technologies can provide dramatic reductions in mass leading to operational and transportation cost savings. Critical technologies for space transportation systems include nuclear thermal rocket and nuclear electric propulsion options which present compelling concepts for significantly reducing mass, cost or travel time required for Earth-Mars transport

48 CFR 311.7000 - Defining electronic information technology requirements.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Defining electronic information technology requirements. 311.7000 Section 311.7000 Federal Acquisition Regulations System HEALTH... Accessibility Standards 311.7000 Defining electronic information technology requirements. HHS staff that define...

Remote handling requirements and considerations for D-T fusion reactors

International Nuclear Information System (INIS)

Spampinato, P.T.

1984-01-01

This paper presents an overview of the maintenance considerations for next-generation fusion reactors. It draws upon the work done at the Fusion Engineering Design Center over the past several years in the conceptual development of tokamaks and tandem mirrors. It specifically addresses the maintenance philosophy adopted for these devices, the configuration development using a modular design approach, scheduled and unscheduled maintenance operations, assembly and disassembly scenarios for component replacements, maintenance equipment requirements, and the operating availability of these devices. In addition, recent work on the development of a totally remote tokamak configuration is presented

Remote handling requirements and considerations for D-T fusion reactors

International Nuclear Information System (INIS)

Spampinato, P.T.

1984-01-01

This paper an overview of the maintenance considerations of next-generation fusion reactors. It draws upon the work done at the Fusion Engineering Design Center over the past several years in the conceptual development of tokamaks and tandem mirrors. It specifically addresses the maintenance philosophy adopted for these devices, the configuration development using a modular design approach, scheduled and unscheduled maintenance operations, assembly and disassembly scenarios for component replacements, maintenance equipment requirements, and the operating availability of these devices. In addition, recent work on the development of a totally remote tokamak configuration is presented

Maintenance and disassembly considerations for the Technology Demonstration Facility

International Nuclear Information System (INIS)

Spampinato, P.T.

1983-01-01

The Technology Demonstration Facility (TDF) is a tandem-mirror design concept carried out under the direction of Lawrence Livermore National Laboratory. It was conceived as a near-term device with a mission of developing engineering technology in a D-T fusion environment. Overall maintenance and component disassembly were among the responsibilities of the Fusion Engineering Design Center (FEDC). A configuration evolved that was based on the operational requirements of the components, as well as the requirements for their replacements. Component lifetime estimates were used to estimate the frequency and the number of replacements. In addition, it was determined that the need for remote handling equipment followed within 1.5 years after initial start-up, emphasizing the direct relationship between developing maintenance scenarios/equipment and the device configuration. Many of the scheduled maintenance operations were investigated to first order, and preliminary handling equipment concepts were developed

Technology requirement for Halal quality control | Husny | Journal of ...

African Journals Online (AJOL)

Technology requirement for Halal quality control. ... Findings show that each industry segments have different technology characteristics preference. ... Keywords: halal industry, quality control; technology assistance; food and beverage; ...

Remote maintenance for fusion: Requirements vs technology gap

International Nuclear Information System (INIS)

Davis, F.C.; Kuban, D.P.

1989-01-01

Today's remote handling technology was developed in response to the remote maintenance (RM) requirements of the fission community's nuclear fuel recycle process. The needs of the fusion community present new challenges to the remote handling experts of the world. New difficulties are superimposed on the difficulties experienced in maintaining fission processes. Today's technology must be enhanced to respond to the RM needs of these future huge investments. This paper first discusses the current RM needs for fusion based on existing facilities and designs of future machines. It then exposes the gap between these requirements and existing RM technology and recommends ways to extend the state of the art to close this gap

14 CFR 1274.937 - Security requirements for unclassified information technology resources.

Science.gov (United States)

2010-01-01

... information technology resources. 1274.937 Section 1274.937 Aeronautics and Space NATIONAL AERONAUTICS AND... Conditions § 1274.937 Security requirements for unclassified information technology resources. Security Requirements for Unclassified Information Technology Resources July 2002 (a) The Recipient shall be responsible...

Wireless Technology Use Case Requirement Analysis for Future Space Applications

Science.gov (United States)

Abedi, Ali; Wilkerson, DeLisa

2016-01-01

This report presents various use case scenarios for wireless technology -including radio frequency (RF), optical, and acoustic- and studies requirements and boundary conditions in each scenario. The results of this study can be used to prioritize technology evaluation and development and in the long run help in development of a roadmap for future use of wireless technology. The presented scenarios cover the following application areas: (i) Space Vehicles (manned/unmanned), (ii) Satellites and Payloads, (iii) Surface Explorations, (iv) Ground Systems, and (v) Habitats. The requirement analysis covers two parallel set of conditions. The first set includes the environmental conditions such as temperature, radiation, noise/interference, wireless channel characteristics and accessibility. The second set of requirements are dictated by the application and may include parameters such as latency, throughput (effective data rate), error tolerance, and reliability. This report provides a comprehensive overview of all requirements from both perspectives and details their effects on wireless system reliability and network design. Application area examples are based on 2015 NASA Technology roadmap with specific focus on technology areas: TA 2.4, 3.3, 5.2, 5.5, 6.4, 7.4, and 10.4 sections that might benefit from wireless technology.

Technology Transfer and Climate Change: Additional Considerations for Implementation under the UNFCCC

Directory of Open Access Journals (Sweden)

Karen Sullivan

2011-06-01

Full Text Available Technology transfer is recognised as playing a central and critical role in the global response to climate change, as embodied in the Unite Nations Framework Convention on Climate Change (UNFCCC. However, technology transfer is a complex process, and despite numerous attempts to prescribe approaches to optimisation, there remain serious obstacles to its effective operation. The breadth of technologies and range of would-be recipient territories under the climate change regime serve to complicate things even further. Against this background, the Expert Group on Technology Transfer have produced a robust Strategy, which it will now fall to the Technology Mechanism announced in Cancun to implement. However, despite the rigour with which the technology transfer strategy was produced, it is never possible to cover all possible eventualities. It is on this basis that this article presents a number of tactical and strategic issues which may merit further consideration as the implementation process moves forward. At the operational level, such issues include a possible role for a centralised or regional technology procurement effort, the need for greater emphasis on sectoral specific approaches to technology transfer, and a pragmatic approach to reducing the impact of some barriers to transactions by the expedient use of insurance to reduce risk, as opposed to the longer term approach of international standardisation. At the strategic level, there are major issues with regard to prioritisation of resources applied to technology transfer, and in particular the resolution of the tensions existing between achieving sustainable development and the time critical need to achieve climate stabilisation.

Cyanobacteria and Microalgae: Thermoeconomic Considerations in Biofuel Production

Directory of Open Access Journals (Sweden)

Umberto Lucia

2018-01-01

Full Text Available In thermodynamics, the useful work in any process can be evaluated by using the exergy quantity. The analyses of irreversibility are fundamental in the engineering design and in the productive processes’ development in order to obtain the economic growth. Recently, the use has been improved also in the thermodynamic analysis of the socio-economic context. Consequently, the exergy lost is linked to the energy cost required to maintain the productive processes themselves. The fundamental role of the fluxes and the interaction between systems and their environment is highlighted. The equivalent wasted primary resource value for the work-hour is proposed as an indicator to support the economic considerations on the biofuel production by using biomass and bacteria. The equivalent wasted primary resource value for the work-hour is proposed as an indicator to support the economic considerations of the biofuel production by using biomass and bacteria. Moreover, the technological considerations can be developed by using the exergy inefficiency. Consequently, bacteria use can be compared with other means of biofuel production, taking into account both the technologies and the economic considerations. Cyanobacteria results as the better organism for biofuel production.

VHA mental health information system: applying health information technology to monitor and facilitate implementation of VHA Uniform Mental Health Services Handbook requirements.

Science.gov (United States)

Trafton, Jodie A; Greenberg, Greg; Harris, Alex H S; Tavakoli, Sara; Kearney, Lisa; McCarthy, John; Blow, Fredric; Hoff, Rani; Schohn, Mary

2013-03-01

To describe the design and deployment of health information technology to support implementation of mental health services policy requirements in the Veterans Health Administration (VHA). Using administrative and self-report survey data, we developed and fielded metrics regarding implementation of the requirements delineated in the VHA Uniform Mental Health Services Handbook. Finalized metrics were incorporated into 2 external facilitation-based quality improvement programs led by the VHA Mental Health Operations. To support these programs, tailored site-specific reports were generated. Metric development required close collaboration between program evaluators, policy makers and clinical leadership, and consideration of policy language and intent. Electronic reports supporting different purposes required distinct formatting and presentation features, despite their having similar general goals and using the same metrics. Health information technology can facilitate mental health policy implementation but must be integrated into a process of consensus building and close collaboration with policy makers, evaluators, and practitioners.

Arms and technology transfers: Security and economic considerations among importing and exporting states

International Nuclear Information System (INIS)

Lodgaard, S.; Pfaltzgraff, R.L. Jr.

1995-01-01

The issues of technology and armament transfers are increasingly at the forefront of problems of international security and disarmament. Three major reasons could explain this. First, the disarmament process has been very successful in the last few years, especially in the field of nuclear, as well chemical and conventional, weapons. Second the disarmament effort underway concerns primarily the old partners of the East-West confrontation. Last, the general context, characterized by the opening and widening of exchanges, the increasingly open and transparent circulation of techniques and material, and the globalization of economic relations, must be taken into account. This report, prepared by UNIDIR comprises the following subjects: General trends in defense related transfers; Political/military factors associated with the diffusion of advanced technology; economic and technological consideration; and facilitation of economic growth/maximization of regional security and stability

A Conceptual Methodology for Assessing Acquisition Requirements Robustness against Technology Uncertainties

Science.gov (United States)

Chou, Shuo-Ju

2011-12-01

In recent years the United States has shifted from a threat-based acquisition policy that developed systems for countering specific threats to a capabilities-based strategy that emphasizes the acquisition of systems that provide critical national defense capabilities. This shift in policy, in theory, allows for the creation of an "optimal force" that is robust against current and future threats regardless of the tactics and scenario involved. In broad terms, robustness can be defined as the insensitivity of an outcome to "noise" or non-controlled variables. Within this context, the outcome is the successful achievement of defense strategies and the noise variables are tactics and scenarios that will be associated with current and future enemies. Unfortunately, a lack of system capability, budget, and schedule robustness against technology performance and development uncertainties has led to major setbacks in recent acquisition programs. This lack of robustness stems from the fact that immature technologies have uncertainties in their expected performance, development cost, and schedule that cause to variations in system effectiveness and program development budget and schedule requirements. Unfortunately, the Technology Readiness Assessment process currently used by acquisition program managers and decision-makers to measure technology uncertainty during critical program decision junctions does not adequately capture the impact of technology performance and development uncertainty on program capability and development metrics. The Technology Readiness Level metric employed by the TRA to describe program technology elements uncertainties can only provide a qualitative and non-descript estimation of the technology uncertainties. In order to assess program robustness, specifically requirements robustness, against technology performance and development uncertainties, a new process is needed. This process should provide acquisition program managers and decision

Key policy considerations for facilitating low carbon technology transfer to developing countries

International Nuclear Information System (INIS)

Ockwell, David G.; Watson, Jim; MacKerron, Gordon; Pal, Prosanto; Yamin, Farhana

2008-01-01

Based on Phase I of a UK-India collaborative study, this paper analyses two case studies of low carbon technologies-hybrid vehicles and coal-fired power generation via integrated gasification combined cycle (IGCC). The analysis highlights the following six key considerations for the development of policy aimed at facilitating low carbon technology transfer to developing countries: (1) technology transfer needs to be seen as part of a broader process of sustained, low carbon technological capacity development in recipient countries; (2) the fact that low carbon technologies are at different stages of development means that low carbon technology transfer involves both vertical transfer (the transfer of technologies from the R and D stage through to commercialisation) and horizontal transfer (the transfer from one geographical location to another). Barriers to transfer and appropriate policy responses often vary according to the stage of technology development as well as the specific source and recipient country contexts; (3) less integrated technology transfer arrangements, involving, for example, acquisition of different items of plant from a range of host country equipment manufacturers, are more likely to involve knowledge exchange and diffusion through recipient country economies; (4) recipient firms that, as part of the transfer process, strategically aim to obtain technological know-how and knowledge necessary for innovation during the transfer process are more likely to be able to develop their capacity as a result; (5) whilst access to Intellectual Property Rights (IPRs) may sometimes be a necessary part of facilitating technology transfer, it is not likely to be sufficient in itself. Other factors such as absorptive capacity and risks associated with new technologies must also be addressed; (6) there is a central role for both national and international policy interventions in achieving low carbon technology transfer. The lack of available empirical analysis

Economic aspects of advanced energy technologies

International Nuclear Information System (INIS)

Ramakumar, R.; Rodriguez, A.P.; Venkata, S.S.

1993-01-01

Advanced energy technologies span a wide variety of resources, techniques, and end-user requirements. Economic considerations are major factors that shape their harnessing and utilization. A discussion of the basic factors in the economic arena is presented, with particular emphasis on renewable energy technologies--photovoltaics, solar-thermal, wind-electric conversion, biomass utilization, hydro, and tidal and wave energy systems. The following are essential to determine appropriate energy system topologies: proper resource-need matching with an eye on the quality of energy requirements, integrated use of several resources and technologies, and a comprehensive consideration which includes prospecting, collection, conversion, transportation, distribution, storage and reconversion, end use, and subsequent waste management aspects. A few case studies are included to apprise the reader of the status of some of the key technologies and systems

Fuels from microalgae: Technology status, potential, and research requirements

Energy Technology Data Exchange (ETDEWEB)

Neenan, B.; Feinberg, D.; Hill, A.; McIntosh, R.; Terry, K.

1986-08-01

Although numerous options for the production of fuels from microalgae have been proposed, our analysis indicates that only two qualify for extensive development - gasoline and ester fuel. In developing the comparisons that support this conclusion, we have identified the major areas of microalgae production and processing that require extensive development. Technology success requires developing and testing processes that fully utilize the polar and nonpolar lipids produced by microalgae. Process designs used in these analyses were derived from fragmented, preliminary laboratory data. These results must be substantiated and integrated processes proposed, tested, and refined to be able to evaluate the commercial feasibility from microalgae. The production of algal feedstocks for processing to gasoline or ester fuel requires algae of high productivity and high lipid content that efficiently utilize saline waters. Species screening and development suggest that algae can achieve required standards taken individually, but algae that can meet the integrated requirements still elude researchers. Effective development of fuels from microalgae technology requires that R and D be directed toward meeting the integrated standards set out in the analysis. As technology analysts, it is inappropriate for us to dictate how the R and D effort should proceed to meet these standards. We end our role by noting that alternative approaches to meeting the feasibility targets have been identified, and it is now the task of program managers and scientists to choose the appropriate approach to assure the greatest likelihood of realizing a commercially viable technology. 70 refs., 39 figs., 35 tabs.

Technical and governance considerations for advanced metering infrastructure/smart meters: Technology, security, uncertainty, costs, benefits, and risks

International Nuclear Information System (INIS)

McHenry, Mark P.

2013-01-01

The fundamental role of policymakers when considering Advanced Metering Infrastructure (AMI), or ‘smart meters for energy and water infrastructure is to investigate a broad range of complex interrelated issues. These include alternative technical and non-technical options and deployment needs, the cost and benefits of the infrastructure (risks and mitigation measures), and the impact of a number of stakeholders: consumers, distributors, retailers, competitive market operators, competing technology companies, etc. The scale and number of potential variables in the AMI space is an almost unprecedented challenge to policymakers, with the anticipation of new ancillary products and services, associated market contestability, related regulatory and policy amendments, and the adequacy of consumer protection, education, and safety considerations requiring utmost due-diligence. Embarking on AMI investment entails significant technical, implementation, and strategic risk for governments and administering bodies, and an active effort is required to ensure AMI governance and planning maximises the potential benefits, and minimise uncertainties, costs, and risks to stakeholders. This work seeks to clarify AMI fundamentals and discusses the technical and related governance considerations from a dispassionate perspective, yet acknowledges many stakeholders tend to dichotomise debate, and obfuscate both advantages and benefits, and the converse. - Highlights: • AMI presents an almost unprecedented technical and governance policy challenge. • AMI enables vertical integration of electricity, gas, water, IT, and telco entities • AMI investments involve major technical, implementation, and strategic decisions. • Adequacy of consumer education, safety, privacy, and protection is paramount. • Policy must maximise AMI benefits and minimise uncertainties, costs, and risks

Ethical Considerations Regarding the Use of Smart Home Technologies for Older Adults: An Integrative Review.

Science.gov (United States)

Chung, Jane; Demiris, George; Thompson, Hilaire J

2016-01-01

With the wide adoption and use of smart home applications, there is a need for examining ethical issues regarding smart home use at the intersection of aging, technology, and home environment. The purpose of this review is to provide an overview of ethical considerations and the evidence on these ethical issues based on an integrative literature review with regard to the utilization of smart home technologies by older adults and their family members. REVIEW DESIGN AND METHODS: We conducted an integrative literature review of the scientific literature from indexed databases (e. g., MEDLINE, CINAHL, and PsycINFO). The framework guiding this review is derived from previous work on ethical considerations related to telehealth use for older adults and smart homes for palliative care. Key ethical issues of the framework include privacy, informed consent, autonomy, obtrusiveness, equal access, reduction in human touch, and usability. Six hundred and thirty-five candidate articles were identified between the years 1990 and 2014. Sixteen articles were included in the review. Privacy and obtrusiveness issues appear to be the most important factors that can affect smart home technology adoption. In addition, this article recommends that stigmatization and reliability and maintenance of the system are additional factors to consider. When smart home technology is used appropriately, it has the potential to improve quality of life and maintain safety among older adults, ultimately supporting the desire of older adults for aging in place. The ability to respond to potential ethical concerns will be critical to the future development and application of smart home technologies that aim to enhance safety and independence.

Radiological safety design considerations for fusion research experiments

International Nuclear Information System (INIS)

Crase, K.W.; Singh, M.S.

1979-01-01

A wide variety of fusion research experiments are in the planning or construction stages. Two such experiments, the Nova Laser Fusion Facility and the Mirror Fusion Test Facility (MFTF), are currently under construction at Lawrence Livermore Laboratory. Although the plasma chamber vault for MFTF and the Nova target room will have thick concrete walls and roofs, the radiation safety problems are made complex by the numerous requirements for shield wall penetrations. This paper addresses radiation safety considerations for the MFTF and Nova experiments, and the need for integrated safety considerations and safety technology development during the planning stages of fusion experiments

Development of requirements tracking and verification technology for the NPP software

Energy Technology Data Exchange (ETDEWEB)

Jung, Chul Hwan; Kim, Jang Yeol; Lee, Jang Soo; Song, Soon Ja; Lee, Dong Young; Kwon, Kee Choon

1998-12-30

Searched and analyzed the technology of requirements engineering in the areas of aerospace and defense industry, medical industry and nuclear industry. Summarized the status of tools for the software design and requirements management. Analyzed the software design methodology for the safety software of NPP. Development of the design requirements for the requirements tracking and verification system. Development of the background technology to design the prototype tool for the requirements tracking and verification.

Development of requirements tracking and verification technology for the NPP software

International Nuclear Information System (INIS)

Jung, Chul Hwan; Kim, Jang Yeol; Lee, Jang Soo; Song, Soon Ja; Lee, Dong Young; Kwon, Kee Choon

1998-01-01

Searched and analyzed the technology of requirements engineering in the areas of aerospace and defense industry, medical industry and nuclear industry. Summarized the status of tools for the software design and requirements management. Analyzed the software design methodology for the safety software of NPP. Development of the design requirements for the requirements tracking and verification system. Development of the background technology to design the prototype tool for the requirements tracking and verification

Shuttle Laser Technology Experiment Facility (LTEF)-to-airplane lasercom experiment: Airplane considerations

Science.gov (United States)

Kalil, Ford

1990-01-01

NASA is considering the use of various airplanes for a Shuttle Laser Technology Experiment Facility (LTEF)-to-Airplane laser communications experiment. As supporting documentation, pertinent technical details are included about the potential use of airplanes located at Ames Research Center and Wallops Flight Facility. The effects and application of orbital mechanics considerations are also presented, including slant range, azimuth, elevation, and time. The pros and cons of an airplane equipped with a side port with a bubble window versus a top port with a dome are discussed.

Technological considerations in emergency instrument preparedness

International Nuclear Information System (INIS)

Selby, J.M.

1976-01-01

Emergency preparedness has been emphasized during the development of the nuclear industry. Existing instrumentation technology has been effectively applied to minimizing the probability of accidents. Radiological instrumentation provided for the measurement of ambient radiation levels or routine releases of radioactive material is usually adequate to provide an early warning that an accident is occurring. In contrast, radiological instrumentation capable of providing a reasonable measure of the source term which could be involved in a severe accident has not received enough attention. In emergency planning the capability should be established for identifying as promptly as possible the need for evasive action out in the plant environs and for minimizing the consequences of an accident in terms of resultant human exposure. Therefore instrumentation is required to measure the source term no matter where the point of release might be, together with instrumentation for obtaining meteorological data sufficient to establish the path of the release in the environment

Realistic control considerations for electromagnetically levitated urban transit vehicles

Energy Technology Data Exchange (ETDEWEB)

Billing, J R

1976-04-01

A discussion is given of realistic control considerations of suspension dynamics and vehicle/guideway interaction for electromagnetically-levitated urban transit vehicles in the context of revenue applications. The emphasis is on safety, reliability, and maintainability rather than performance. An example urban transit system is described, and the following considerations of dynamics and control are examined: stability, magnet force requirements, magnet airgap requirements, vehicle ride, and component failures. It is shown that it is a formidable problem to ensure suspension stability under all conditions; that operation on curves is a critical magnet and control system design case; that operation of the magnets in the non-linear regime is unavoidable and that component failures will be a major problem. However, good vehicle ride is to be expected. It is concluded that magnetic levitation suspension technology requires substantial development effort before it can be considered suitable for revenue operation.

Zero Effort Technologies Considerations, Challenges, and Use in Health, Wellness, and Rehabilitation

CERN Document Server

Mihailidis, Alex; Hoey, Jesse

2011-01-01

This book introduces zero-effort technologies (ZETs), an emerging class of technology that requires little or no effort from the people who use it. ZETs use advanced techniques, such as computer vision, sensor fusion, decision-making and planning, and machine learning to autonomously operate through the collection, analysis, and application of data about the user and his/her context. This book gives an overview of ZETs, presents concepts in the development of pervasive intelligent technologies and environments for health and rehabilitation, along with an in-depth discussion of the design princ

Nuclear power strategy: requirements for technology

International Nuclear Information System (INIS)

Orlov, V.V.; Rachkov, V.I.

2001-01-01

The possible role of nuclear power in sustainable development demands answers to at least three questions: Is large-scale nuclear power essential to future development? - Is it feasible to have modern nuclear power transformed for large-scale deployment? - When will large-scale nuclear power be practically needed? The questions are analysed with the requirements to be fulfilled concerning present-day technologies

Understanding the health care utilization of children who require medical technology: A descriptive study of children who require tracheostomies.

Science.gov (United States)

Spratling, Regena

2017-04-01

Children who require medical technology have complex chronic illnesses. This medical technology, including ventilators, oximeters, tracheostomy tubes, and feeding tubes, allows children and their families to live at home; however, the management of the children's care by informal caregivers is complex with the need for intensive, specialized care. The purpose of this study was to examine the sociodemographic and clinical characteristics that affect health care utilization in a population of children who require medical technology. A retrospective electronic health record (EHR) review was completed on the EHR records on 171 children who require medical technology, specifically tracheostomies, at an outpatient technology dependent pulmonary clinic over a three year period (January 2010-December 2012). Descriptive statistics were used to analyze sociodemographic and clinical characteristics, including medical diagnoses, and emergency department (ED) visits and hospitalizations. Of the 171 children requiring medical technology studied, there were numerous medical diagnoses (n=791), 99% had chronic illnesses affecting two or more body systems, and 88% required two or more technologies, including a tracheostomy and a feeding tube. In addition, 91% of the children had at least one ED visit or hospitalization and were treated in the ED approximately three times over the three year period. The findings from this study noted an increased utilization of health care by these children, and identified common symptoms and medical technologies for which caregivers may need interventions, focusing on education in managing symptoms and medical technology prior to presentation to the ED or hospital. Copyright © 2017 Elsevier Inc. All rights reserved.

Technology Requirements for Information Management

Science.gov (United States)

Graves, Sara; Knoblock, Craig A.; Lannom, Larry

2002-01-01

This report provides the results of a panel study conducted into the technology requirements for information management in support of application domains of particular government interest, including digital libraries, mission operations, and scientific research. The panel concluded that it was desirable to have a coordinated program of R&D that pursues a science of information management focused on an environment typified by applications of government interest - highly distributed with very large amounts of data and a high degree of heterogeneity of sources, data, and users.

Redefining Requirements of Ancillary Services for Technology Agnostic Sources

DEFF Research Database (Denmark)

Bondy, Daniel Esteban Morales; MacDonald, Jason; Kara, Emre Can

2018-01-01

New sources for ancillary services are needed, yet the requirements for service provision in most countries are explicitly formulated for traditional generators. This leads to waste of the potential for new technologies to deliver ancillary services. In order to harness this potential, we propose...... to parameterize the requirements of ancillary services so that reserves can be built by combining the advantageous properties of different technologies. The proposal is exemplified through a laboratory test where it shown that the system needs can be covered through cheaper and smaller reserves....

Linking Technology Capabilities to Marketing Requirements: Case of Indonesian Aircraft Industry

Directory of Open Access Journals (Sweden)

Yulianto Suharto

2014-08-01

Full Text Available Abstract. The relationship between strategic technology planning and the overall business strategy has been one of the growing fields that attract much interest both from academics and industrials point of view. The increasingly important role that technology plays in today’s business success is well established.Strategic technology planning activities--within a corporate level--are often implemented by applying integrated planning instrument, which allow firms to consider both technology-oriented and product-oriented aspects. This paper is an attempt to explore the role of strategic planning in the high tech industry using a specific case of aerospace industry in Indonesia.  In order to compete effectively inthe open global marketplace, the company must learn to integrate technology managementwith strategic planning. In other words, all top managers have to linktheir technology capabilities to marketing requirements.Keywords:  technology planning; business strategy; technology capability; marketing requirement; strategic mix 

Industry-Oriented Competency Requirements for Mechatronics Technology in Taiwan

Science.gov (United States)

Shyr, Wen-Jye

2012-01-01

This study employed a three-phase empirical method to identify competency indicators for mechatronics technology according to industry-oriented criteria. In Phase I, a list of required competencies was compiled using Behavioral Event Interviews (BEI) with three engineers specializing in the field of mechatronics technology. In Phase II, the Delphi…

Considerations on the need for electricity storage requirements: Power versus energy

International Nuclear Information System (INIS)

Belderbos, Andreas; Virag, Ana; D’haeseleer, William; Delarue, Erik

2017-01-01

Highlights: • General storage principles are analyzed. • Storage units have different limitations (power versus energy). • Storage power and energy are required, dependent on residual profile. • Relationship between residual profile and optimal storage portfolio is derived. • Broadly applicable rules regarding optimal storage investments are presented. - Abstract: Different storage technologies enable an increasing share of variable renewable generation in the electricity system by reducing the temporal mismatch between generation and demand. Two storage ratings are essential to time-shift delivery of electricity to loads: electric power, or instantaneous electricity flow [W], and electric energy, or power integrated over time [Wh]. An optimal storage portfolio is likely composed of multiple technologies, each having specific power and energy ratings. This paper derives and explains the link between the shape of the time-varying demand and generation profiles and the amount of desirably installed storage capacity, both energy and power. An analysis is performed for individual storage technologies first, showing a link between the necessary power and energy capacity and the demand and generation profile. Then combinations of storage technologies are analyzed to reveal their mutual interaction in a storage portfolio. Results show an increase in desirability for storage technologies with low cost power ratings when the mismatch between generation and demand occurs in daily to weekly cycles. Storage technologies with low cost energy ratings are preferred when this mismatch occurs in monthly to seasonal cycles. The findings of this work can help energy system planners and policy makers to explain results from generation expansion planning studies and to isolate the storage benefits accountable to temporal arbitrage in broader electricity storage studies.

Technologies required for safe and profitable deep level gold mining, South Africa

CSIR Research Space (South Africa)

Willis, PH

2000-01-01

Full Text Available Since the 14th CMMI conference, held in Edinburgh in 1990, at which a paper was presented by the author (Willis, 1990) reviewing the role of integrating new technology as a survival strategy for South African gold mines, considerable change has...

Man-machine interface requirements - advanced technology

Science.gov (United States)

Remington, R. W.; Wiener, E. L.

1984-01-01

Research issues and areas are identified where increased understanding of the human operator and the interaction between the operator and the avionics could lead to improvements in the performance of current and proposed helicopters. Both current and advanced helicopter systems and avionics are considered. Areas critical to man-machine interface requirements include: (1) artificial intelligence; (2) visual displays; (3) voice technology; (4) cockpit integration; and (5) pilot work loads and performance.

Considerations on the use of Virtual and Augmented Reality Technologies in Music Education

DEFF Research Database (Denmark)

Serafin, Stefania; Adjorlu, Ali; Nilsson, Niels Chr.

2017-01-01

Learning to play an instrument is challenging for both children and adults. Adding to this music education in K-12 oftentimes is subject to budget cuts. In this paper, we propose that virtual reality may offer children with an alternative approach to acquiring musical skills. Initially we present...... an overview of the state of the art software and technology for virtual and augmented reality in music, and then we outline a series of considerations on how virtual and augmented reality can help music education....

Considerations in promoting markets for sustainable energy technologies in developing countries

International Nuclear Information System (INIS)

Radka, Mark; Kamel, Sami

2003-01-01

The growth in demand for energy in both developed and developing countries is expected to continue an upward trend for many years, with a large portion of the increase projected to occur in developing countries. As these countries undertake various economic development initiatives and programmes it is important from a global environmental perspective that they increase the proportion of efficient, low carbon emitting energy in the energy mix. This paper identifies a number of ways of improving markets that foster increased adoption of clean energy technologies in developing countries. The paper concludes that a holistic approach is needed if new technology promotion efforts are to succeed. Ensuring the appropriateness of the technology, and hence its sustainability, requires proper attention to social, economic and political criteria as well as the fundamental technical characteristics. (au)

Considerations in promoting markets for sustainable energy technologies in developing countries

Energy Technology Data Exchange (ETDEWEB)

Radka, Mark [United Nations Environment Programme, Div. of Technology, Industry and Economics (France); Kamel, Sami [Risoe National Lab., UNEP Risoe Centre for Energy, Climate Change and Sustainable Development, Roskilde (Denmark)

2003-09-01

The growth in demand for energy in both developed and developing countries is expected to continue an upward trend for many years, with a large portion of the increase projected to occur in developing countries. As these countries undertake various economic development initiatives and programmes it is important from a global environmental perspective that they increase the proportion of efficient, low carbon emitting energy in the energy mix. This paper identifies a number of ways of improving markets that foster increased adoption of clean energy technologies in developing countries. The paper concludes that a holistic approach is needed if new technology promotion efforts are to succeed. Ensuring the appropriateness of the technology, and hence its sustainability, requires proper attention to social, economic and political criteria as well as the fundamental technical characteristics. (au)

Step 1: Human System Integration Pilot-Technology Interface Requirements for Weather Management

Science.gov (United States)

2005-01-01

This document involves definition of technology interface requirements for Hazardous Weather Avoidance. Technology concepts in use by the Access 5 Weather Management Work Package were considered. Beginning with the Human System Integration (HIS) high-level functional requirement for Hazardous Weather Avoidance, and Hazardous Weather Avoidance technology elements, HSI requirements for the interface to the pilot were identified. Results of the analysis describe (1) the information required by the pilot to have knowledge of hazardous weather, and (2) the control capability needed by the pilot to obtain hazardous weather information. Fundamentally, these requirements provide the candidate Hazardous Weather Avoidance technology concepts with the necessary human-related elements to make them compatible with human capabilities and limitations. The results of the analysis describe how Hazardous Weather Avoidance operations and functions should interface with the pilot to provide the necessary Weather Management functionality to the UA-pilot system. Requirements and guidelines for Hazardous Weather Avoidance are partitioned into four categories: (1) Planning En Route (2) Encountering Hazardous Weather En Route, (3) Planning to Destination, and (4) Diversion Planning Alternate Airport. Each requirement is stated and is supported with a rationale and associated reference(s).

Federal technology transfer requirements :a focused study of principal agencies approaches with implications for the Department of Homeland Security.

Energy Technology Data Exchange (ETDEWEB)

Koker, Denise; Micheau, Jill M.

2006-07-01

This report provides relevant information and analysis to the Department of Homeland Security (DHS) that will assist DHS in determining how to meet the requirements of federal technology transfer legislation. These legal requirements are grouped into five categories: (1) establishing an Office of Research and Technology Applications, or providing the functions thereof; (2) information management; (3) enabling agreements with non-federal partners; (4) royalty sharing; and (5) invention ownership/obligations. These five categories provide the organizing framework for this study, which benchmarks other federal agencies/laboratories engaged in technology transfer/transition Four key agencies--the Department of Health & Human Services (HHS), the U.S. Department of Agriculture (USDA), the Department of Energy (DOE), and the Department of Defense (DoD)--and several of their laboratories have been surveyed. An analysis of DHS's mission needs for commercializing R&D compared to those agencies/laboratories is presented with implications and next steps for DHS's consideration. Federal technology transfer legislation, requirements, and practices have evolved over the decades as agencies and laboratories have grown more knowledgeable and sophisticated in their efforts to conduct technology transfer and as needs and opinions in the federal sector have changed with regards to what is appropriate. The need to address requirements in a fairly thorough manner has, therefore, resulted in a lengthy paper. There are two ways to find summary information. Each chapter concludes with a summary, and there is an overall ''Summary and Next Steps'' chapter on pages 57-60. For those readers who are unable to read the entire document, we recommend referring to these pages.

High-κ gate dielectrics: Current status and materials properties considerations

Science.gov (United States)

Wilk, G. D.; Wallace, R. M.; Anthony, J. M.

2001-05-01

Many materials systems are currently under consideration as potential replacements for SiO2 as the gate dielectric material for sub-0.1 μm complementary metal-oxide-semiconductor (CMOS) technology. A systematic consideration of the required properties of gate dielectrics indicates that the key guidelines for selecting an alternative gate dielectric are (a) permittivity, band gap, and band alignment to silicon, (b) thermodynamic stability, (c) film morphology, (d) interface quality, (e) compatibility with the current or expected materials to be used in processing for CMOS devices, (f) process compatibility, and (g) reliability. Many dielectrics appear favorable in some of these areas, but very few materials are promising with respect to all of these guidelines. A review of current work and literature in the area of alternate gate dielectrics is given. Based on reported results and fundamental considerations, the pseudobinary materials systems offer large flexibility and show the most promise toward successful integration into the expected processing conditions for future CMOS technologies, especially due to their tendency to form at interfaces with Si (e.g. silicates). These pseudobinary systems also thereby enable the use of other high-κ materials by serving as an interfacial high-κ layer. While work is ongoing, much research is still required, as it is clear that any material which is to replace SiO2 as the gate dielectric faces a formidable challenge. The requirements for process integration compatibility are remarkably demanding, and any serious candidates will emerge only through continued, intensive investigation.

Technology Requirements For In Situ Decommissioning Workshop Report

International Nuclear Information System (INIS)

Jannik, T.; Lee, P.; Gladden, J.; Langton, C.; Serrato, M.; Urland, C.; Reynolds, E.

2009-01-01

In recognition of the increasing attention being focused on In Situ Decommissioning (ISD or entombment) as an acceptable and beneficial decommissioning end state, the Department of Energy's (DOE) Office of Environmental Management (EM) is developing guidance for the implementation of ISD of excess facilities within the DOE complex. Consistent with the overarching DOE goals for increased personnel and environmental safety, reduced technical uncertainties and risks, and overall gains in efficiencies and effectiveness, EM's Office of Deactivation and Decommissioning and Facility Engineering (EM-23) initiated efforts to identify the technical barriers and technology development needs for the optimal implementation of ISD. Savannah River National Laboratory (SRNL), as the EM Corporate Laboratory, conducted an ISD Technology Needs Workshop to identify the technology needs at DOE sites. The overall goal of the workshop was to gain a full understanding of the specific ISD technical challenges, the technologies available, and those needing development. The ISD Workshop was held December 9-10, 2008 in Aiken, SC. Experienced decommissioning operations personnel from Richland Operations Office (RL), Idaho National Laboratory (INL) and Savannah River Site (SRS) along with scientists and engineers specific expertise were assembled to identify incremental and 'game changing' solutions to ISD technology challenges. The workshop and follow-up activities yielded 14 technology needs statements and the recommendation that EM-23 prioritize and pursue the following specific technology development and deployment actions. For each action, the recommended technology acquisition mechanisms (competitive solicitation (CS) or direct funding (TCR)) are provided. Activities that are time critical for ISD projects, or require unique capabilities that reside in the DOE Laboratory system will be funded directly to those institutions. Activities that have longer lead times and where the private

48 CFR 1804.470 - Security requirements for unclassified information technology (IT) resources.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Security requirements for unclassified information technology (IT) resources. 1804.470 Section 1804.470 Federal Acquisition Regulations... Classified Information Within Industry 1804.470 Security requirements for unclassified information technology...

Technical considerations and policy requirements for plutonium management

International Nuclear Information System (INIS)

Christensen, D.C.; Dinehart, S.M.; Yarbro, S.L.

1995-01-01

The goals for plutonium management have changed dramatically over the past few years. Today, the challenge is focused on isolating plutonium from the environment and preparing it for permanent disposition. In parallel, the requirements for managing plutonium are rapidly changing. For example, there is a significant increase in public awareness on how facilities operate, increased attention to environmental safety and health (ES and H) concerns, greater interest in minimizing waste, more emphasis on protecting material from theft, providing materials for international inspection, and a resurgence of interest in using plutonium as an energy source. Of highest concern, in the immediate future, is protecting plutonium from theft or diversion, while the national policy on disposition is debated. These expanded requirements are causing a broadening of responsibilities within the Department of Energy (DOE) to include at least seven organizations. An unavoidable consequence is the divergence in approach and short-term goals for managing similar materials within each organization. The technology base does exist, properly, safely, and cost effectively to extract plutonium from excess weapons, residues, waste, and contaminated equipment and facilities, and to properly stabilize it. Extracting the plutonium enables it to be easily inventoried, packaged, and managed to minimize the risk of theft and diversion. Discarding excess plutonium does not sufficiently reduce the risk of diversion, and as a result, long-term containment of plutonium from the environment may not be able to be proven to the satisfaction of the public

Technical considerations and policy requirements for plutonium management

International Nuclear Information System (INIS)

Christensen, D.C.; Dinehart, S.M.; Yarbro, S.L.

1996-01-01

The goals for plutonium management have changed dramatically over the past few years. Today, the challenge is focused on isolating plutonium from the environment and preparing it for permanent disposition. In parallel, the requirements for managing plutonium are rapidly changing. For example, there is a significant increase in public awareness on how facilities operate, increased attention to environmental safety and health (ES and H) concerns, greater interest in minimizing waste, more emphasis on protecting material from theft, providing materials for international inspection, and a resurgence of interest in using plutonium as an energy source. Of highest concern, in the immediate future, is protecting plutonium from theft or diversion, while the national policy on disposition is debated. These expanded requirements are causing a broadening of responsibilities within the Department of Energy (DOE) to include at least seven organizations. An unavoidable consequence is the divergence in approach and short-term goals for managing similar materials within each organization. The technology base does exist, properly, safely, and cost effectively to extract plutonium from excess weapons, residues, waste, and contaminated equipment and facilities, and to properly stabilize it. Extracting the plutonium enables it to be easily inventoried, packaged, and managed to minimize the risk of theft and diversion. Discarding excess plutonium does not sufficient reduce the risk of diversion, and as a result, long-term containment of plutonium from the environment may not be able to be proven to the satisfaction of the public

Requirements for cross-border spatial planning technologies in the European context

Directory of Open Access Journals (Sweden)

Frank Susanne

2017-01-01

Full Text Available This communication paper investigates requirements for cross-border spatial planning technologies. We refer to European cross-border regions, which are located in the European Baltic Sea Region. We hypothesize that there is no efficient cross-border spatial planning without engagement from various stakeholders, supported by novel spatial planning technologies. This study presents the results from a survey that identifies the requirements for spatial planning technologies adequate for cross - border regions. On the basis of this survey, carried out within the INTECRE project partners coming from the Baltic Sea Region, the study provides general recommendations about cross - border spatial planning technologies. Addressed in the survey are the following central issues: definition of the scope of such technologies, the data base and international planning data provision, features and properties of planning technologies, and stakeholder involvement. The research findings are transferable to wider European and extra- European contexts.

Synthetic vision systems: operational considerations simulation experiment

Science.gov (United States)

Kramer, Lynda J.; Williams, Steven P.; Bailey, Randall E.; Glaab, Louis J.

2007-04-01

Synthetic vision is a computer-generated image of the external scene topography that is generated from aircraft attitude, high-precision navigation information, and data of the terrain, obstacles, cultural features, and other required flight information. A synthetic vision system (SVS) enhances this basic functionality with real-time integrity to ensure the validity of the databases, perform obstacle detection and independent navigation accuracy verification, and provide traffic surveillance. Over the last five years, NASA and its industry partners have developed and deployed SVS technologies for commercial, business, and general aviation aircraft which have been shown to provide significant improvements in terrain awareness and reductions in the potential for Controlled-Flight-Into-Terrain incidents / accidents compared to current generation cockpit technologies. It has been hypothesized that SVS displays can greatly improve the safety and operational flexibility of flight in Instrument Meteorological Conditions (IMC) to a level comparable to clear-day Visual Meteorological Conditions (VMC), regardless of actual weather conditions or time of day. An experiment was conducted to evaluate SVS and SVS-related technologies as well as the influence of where the information is provided to the pilot (e.g., on a Head-Up or Head-Down Display) for consideration in defining landing minima based upon aircraft and airport equipage. The "operational considerations" evaluated under this effort included reduced visibility, decision altitudes, and airport equipage requirements, such as approach lighting systems, for SVS-equipped aircraft. Subjective results from the present study suggest that synthetic vision imagery on both head-up and head-down displays may offer benefits in situation awareness; workload; and approach and landing performance in the visibility levels, approach lighting systems, and decision altitudes tested.

Synthetic Vision Systems - Operational Considerations Simulation Experiment

Science.gov (United States)

Kramer, Lynda J.; Williams, Steven P.; Bailey, Randall E.; Glaab, Louis J.

2007-01-01

Synthetic vision is a computer-generated image of the external scene topography that is generated from aircraft attitude, high-precision navigation information, and data of the terrain, obstacles, cultural features, and other required flight information. A synthetic vision system (SVS) enhances this basic functionality with real-time integrity to ensure the validity of the databases, perform obstacle detection and independent navigation accuracy verification, and provide traffic surveillance. Over the last five years, NASA and its industry partners have developed and deployed SVS technologies for commercial, business, and general aviation aircraft which have been shown to provide significant improvements in terrain awareness and reductions in the potential for Controlled-Flight-Into-Terrain incidents/accidents compared to current generation cockpit technologies. It has been hypothesized that SVS displays can greatly improve the safety and operational flexibility of flight in Instrument Meteorological Conditions (IMC) to a level comparable to clear-day Visual Meteorological Conditions (VMC), regardless of actual weather conditions or time of day. An experiment was conducted to evaluate SVS and SVS-related technologies as well as the influence of where the information is provided to the pilot (e.g., on a Head-Up or Head-Down Display) for consideration in defining landing minima based upon aircraft and airport equipage. The "operational considerations" evaluated under this effort included reduced visibility, decision altitudes, and airport equipage requirements, such as approach lighting systems, for SVS-equipped aircraft. Subjective results from the present study suggest that synthetic vision imagery on both head-up and head-down displays may offer benefits in situation awareness; workload; and approach and landing performance in the visibility levels, approach lighting systems, and decision altitudes tested.

Using Digital Technologies in Clinical HIV Research: Real-World Applications and Considerations for Future Work.

Science.gov (United States)

Andriesen, Jessica; Bull, Sheana; Dietrich, Janan; Haberer, Jessica E; Van Der Pol, Barbara; Voronin, Yegor; Wall, Kristin M; Whalen, Christopher; Priddy, Frances

2017-07-31

Digital technologies, especially if used in novel ways, provide a number of potential advantages to clinical research in trials related to human immunodeficiency virus (HIV) and acquired immune deficiency syndrome (AIDS) and may greatly facilitate operations as well as data collection and analysis. These technologies may even allow answering questions that are not answerable with older technologies. However, they come with a variety of potential concerns for both the participants and the trial sponsors. The exact challenges and means for alleviation depend on the technology and on the population in which it is deployed, and the rapidly changing landscape of digital technologies presents a challenge for creating future-proof guidelines for technology application. The aim of this study was to identify and summarize some common themes that are frequently encountered by researchers in this context and highlight those that should be carefully considered before making a decision to include these technologies in their research. In April 2016, the Global HIV Vaccine Enterprise surveyed the field for research groups with recent experience in novel applications of digital technologies in HIV clinical research and convened these groups for a 1-day meeting. Real-world uses of various technologies were presented and discussed by 46 attendees, most of whom were researchers involved in the design and conduct of clinical trials of biomedical HIV prevention and treatment approaches. After the meeting, a small group of organizers reviewed the presentations and feedback obtained during the meeting and categorized various lessons-learned to identify common themes. A group of 9 experts developed a draft summary of the findings that was circulated via email to all 46 attendees for review. Taking into account the feedback received, the group finalized the considerations that are presented here. Meeting presenters and attendees discussed the many successful applications of digital

Tritium extraction technologies and DEMO requirements

Energy Technology Data Exchange (ETDEWEB)

Demange, D., E-mail: david.demange@kit.edu [Karlsruhe Institute of Technology, Institute for Technical Physics, Tritium Laboratory Karlsruhe, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Antunes, R.; Borisevich, O.; Frances, L. [Karlsruhe Institute of Technology, Institute for Technical Physics, Tritium Laboratory Karlsruhe, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Rapisarda, D. [Laboratorio Nacional de Fusión, EURATOM-CIEMAT, 28040 Madrid (Spain); Santucci, A. [ENEA for EUROfusion, Via E. Fermi 45, 00044 Frascati, Roma (Italy); Utili, M. [ENEA CR Brasimone, 40032 Camugnano, BO (Italy)

2016-11-01

Highlights: • We detail the R&D plan for tritium technology of the European DEMO breeding blanket. • We study advanced and efficient extraction techniques to improve tritium management. • We consider inorganic membranes and catalytic membrane reactor for solid blankets. • We consider permeator against vacuum and vacuum sieve tray for liquid blankets. - Abstract: The conceptual design of the tritium extraction system (TES) for the European DEMO reactor is worked out in parallel for four different breeding blankets (BB) retained by EUROfusion. The TES design has to be tackled in an integrated manner optimizing the synergy with the directly interfacing inner fuel cycle, while minimizing the tritium permeation into the coolant. Considering DEMO requirements, it is most likely that only advanced technologies will be suitable for the tritium extraction systems of the BB. This paper overviews the European work programme for R&D on tritium technology for the DEMO BB, summaries the general first outcomes, and details the specific and comprehensive R&D program to study experimentally immature but promising technologies such as vacuum sieve tray or permeator against vacuum for tritium extraction from PbLi, and advanced inorganic membranes and catalytic membrane reactor for tritium extraction from He. These techniques are simple, fully continuous, likely compact with contained energy consumption. Several European Laboratories are joining their efforts to deploy several new experimental setups to accommodate the tests campaigns that will cover small scale experiments with tritium and inactive medium scale tests so as to improve the technology readiness level of these advanced processes.

Technology assessment on a hydrogen fueled aircraft system; 1980 nendo suiso nenryo kokuki system ni kansuru technology assissment

Energy Technology Data Exchange (ETDEWEB)

NONE

1981-03-01

This paper describes technology assessment on a hydrogen fueled aircraft system. Indispensable as technological assignments are structuring different safety systems including prevention of leakage and ignition, not to speak of developing an airframe structure that considers cryogenic and brittle nature of liquefied hydrogen. Operation related industries would be subjected to increased burdens, such as purchase and servicing of new implements and materials, but the liquefied hydrogen industry will have a chance of growing largely with wide repercussions. In the environmental aspect, the aircraft will have less CO and SOx emission in exhaust gas and lower noise than the conventional jet aircraft. Technological problems to be solved in the development include the safety of fuel tanks, safety assurance measures, and liquefied hydrogen of the required amount to be supplied easily and at low cost. To meet these requirements, noticeable progress is demanded in hydrogen manufacturing technologies. What is also required is explosion-proof safety that does not have to require crews to take special considerations in take-off and landing, not to speak of during flight. This also applies to fuel feeding and servicing on the ground. Considerations must be given that rise in operation cost should not be excessive. (NEDO)

Preliminary site requirements and considerations for a monitored retrievable storage facility

International Nuclear Information System (INIS)

1991-08-01

This report presents preliminary requirements and considerations for siting monitored retrievable storage (MRS) facility. It purpose is to provide guidance for assessing the technical suitability of potential sites for the facility. It has been reviewed by the NRC staff, which stated that this document is suitable for ''guidance in making preliminary determinations concerning MRS site suitability.'' The MRS facility will be licensed by the US Nuclear Regulatory Commission. It will receive spent fuel from commercial nuclear power plants and provide a limited amount of storage for this spent fuel. When a geologic repository starts operations, the MRS facility will also stage spent-fuel shipments to the repository. By law, storage at the MRS facility is to be temporary, with permanent disposal provided in a geologic repository to be developed by the DOE

Engineering Runtime Requirements-Monitoring Systems Using MDA Technologies

Science.gov (United States)

Skene, James; Emmerich, Wolfgang

The Model-Driven Architecture (MDA) technology toolset includes a language for describing the structure of meta-data, the MOF, and a language for describing consistency properties that data must exhibit, the OCL. Off-the-shelf tools can generate meta-data repositories and perform consistency checking over the data they contain. In this paper we describe how these tools can be used to implement runtime requirements monitoring of systems by modelling the required behaviour of the system, implementing a meta-data repository to collect system data, and consistency checking the repository to discover violations. We evaluate the approach by implementing a contract checker for the SLAng service-level agreement language, a language defined using a MOF meta-model, and integrating the checker into an Enterprise JavaBeans application. We discuss scalability issues resulting from immaturities in the applied technologies, leading to recommendations for their future development.

Policy Considerations for the Blockchain Technology Public and Private Applications

OpenAIRE

GABISON Garry

2016-01-01

In 2008, Satoshi Nakamoto—an individual or group of individuals— released a paper that described Bitcoin, a first of its kind, peer-to-peer electronic cash system. Bitcoin relies mostly on existing technology but requires a new invention, a blockchain, to solve an old problem: how do two parties conduct an online transaction without knowing or trusting each other and without the need for a trusted third-party intermediary? Encryption and large-scale redundancy was combined w...

Organizational Considerations for Advanced Manufacturing Technology

Science.gov (United States)

DeRuntz, Bruce D.; Turner, Roger M.

2003-01-01

In the last several decades, the United States has experienced a decline in productivity, while the world has seen a maturation of the global marketplace. Nations have moved manufacturing strategy and process technology issues to the top of management priority lists. The issues surrounding manufacturing technologies and their implementations have…

42 CFR 495.336 - Health information technology planning advance planning document requirements (HIT PAPD).

Science.gov (United States)

2010-10-01

... 42 Public Health 5 2010-10-01 2010-10-01 false Health information technology planning advance... STANDARDS FOR THE ELECTRONIC HEALTH RECORD TECHNOLOGY INCENTIVE PROGRAM Requirements Specific to the Medicaid Program § 495.336 Health information technology planning advance planning document requirements...

Technology investment fund : issues for consideration : issue paper for an expert workshop

International Nuclear Information System (INIS)

Drexhage, J.

2006-12-01

This document was prepared in advance of an expert workshop held to discuss technology investment funds (TIF) related to Canada's Clean Air Act. TIFs are being considered in the development of the Clean Air Act as a compliance option for air emissions regulations. Energy production is expected to dominate Canadian business in the future, and the domestic sector is undergoing a marked shift from conventional to unconventional sources such as oil sands, coalbed methane (CBM) and liquefied natural gas. Technological solutions are required to allow Canada to obtain the benefits of the country's natural resource wealth while reducing impacts to the environment. However, solutions will vary from region to region. The report examined issues related to financing research and demonstration programs. Research and development policies were discussed, as well as the role of the government in encouraging public and private partnerships. It was suggested that a portfolio of policy approaches will be required, as well as a compliance-based TIF designed to address a range of greenhouse gas (GHG) and air pollutants. Issues concerning rates of contributions and recognition for existing technology investments were also reviewed. Various taxes, levies, and funding approaches were outlined. It was concluded that a successful TIF will form part of an overall emissions trading framework.1 tab

A survey of clinical performance skills requirements in medical radiation technology

International Nuclear Information System (INIS)

Rowntree, P.A.; Veitch, J.D.

1993-01-01

This paper outlines the reasons behind carry out a study of clinical performance skills requirements and the method being used to gather data. It describes the changes which have occurred in radiographer education in Queensland, the broader impact brought about by changes in professional body requirements and the development of a Competency based Standards Document for the profession. The paper provides examples of the survey design and layout being developed for distribution to third year students in the Medical Imaging Technology major of the Bachelor of Applied Science (Medical Radiation Technology) Queensland University of Technology, graduates and clinical departments in Queensland. 1 tab., 1 fig

Fast mask writers: technology options and considerations

Science.gov (United States)

Litt, Lloyd C.; Groves, Timothy; Hughes, Greg

2011-04-01

The semiconductor industry is under constant pressure to reduce production costs even as the complexity of technology increases. Lithography represents the most expensive process due to its high capital equipment costs and the implementation of low-k1 lithographic processes, which have added to the complexity of making masks because of the greater use of optical proximity correction, pixelated masks, and double or triple patterning. Each of these mask technologies allows the production of semiconductors at future nodes while extending the utility of current immersion tools. Low-k1 patterning complexity combined with increased data due to smaller feature sizes is driving extremely long mask write times. While a majority of the industry is willing to accept times of up to 24 hours, evidence suggests that the write times for many masks at the 22 nm node and beyond will be significantly longer. It has been estimated that funding on the order of 50M to 90M for non-recurring engineering (NRE) costs will be required to develop a multiple beam mask writer system, yet the business case to recover this kind of investment is not strong. Moreover, funding such a development poses a high risk for an individual supplier. The structure of the mask fabrication marketplace separates the mask writer equipment customer (the mask supplier) from the final customer (wafer manufacturer) that will be most effected by the increase in mask cost that will result if a high speed mask writer is not available. Since no individual company will likely risk entering this market, some type of industry-wide funding model will be needed.

Requirements for and barriers towards interoperable ehealth technology in primary care

NARCIS (Netherlands)

Oude Nijeweme-d'Hollosy, Wendeline; van Velsen, Lex Stefan; Huygens, Martine; Hermens, Hermanus J.

Despite eHealth technology's rapid growth, eHealth applications are rarely embedded within primary care, mostly because systems lack interoperability. This article identifies requirements for, and barriers towards, interoperable eHealth technology from healthcare professionals' perspective -- the

Technological options for acid rain control

International Nuclear Information System (INIS)

Princiotta, F.T.; Sedman, C.B.

1993-01-01

The paper discusses technological options for acid rain control. Compliance with Title IV of the Clean Air Act Amendments of 1990 will require careful scrutiny of a number of issues before selecting control options to reduce sulfur dioxide (SO2) and nitrogen oxide (NOx) emissions. One key consideration is the effect of fuel switching or control technology upon the existing dust collector, with additional air toxics legislation looming ahead. A number of likely SO2 and NOx retrofit technologies and estimated costs are presented, along with results of retrofit case studies. New hybrid particulate controls are also being developed to meet future requirements

Design considerations for a large-scale image-based text search engine in historical manuscript collections

NARCIS (Netherlands)

Schomaker, Lambertus

2016-01-01

This article gives an overview of design considerations for a handwriting search engine based on pattern recognition and high-performance computing, “Monk”. In order to satisfy multiple and often conflicting technological requirements, an architecture is used which heavily relies on high-performance

48 CFR 1252.239-70 - Security requirements for unclassified information technology resources.

Science.gov (United States)

2010-10-01

... unclassified information technology resources. 1252.239-70 Section 1252.239-70 Federal Acquisition Regulations... of Provisions and Clauses 1252.239-70 Security requirements for unclassified information technology... Unclassified Information Technology Resources (APR 2005) (a) The Contractor shall be responsible for...

Microbiological Monitoring for the Constellation Program: Current Requirements and Future Considerations

Science.gov (United States)

Ott, C. Mark

2007-01-01

Microbiological requirements for spaceflight are based on assessments of infectious disease risk which could impact crew health or mission success. The determination of risk from infectious disease is composed of several factors including (1) crew susceptibility, (2) crew exposure to the infectious disease agent, (3) the concentration of the infectious agent, and (4) the characteristics of the infectious agent. As a result of the Health Stabilization Program, stringent monitoring, and cleaning protocols, in-flight environmental microbial monitoring is not necessary for short-duration spaceflights. However, risk factors change for long-duration missions, as exemplified by the presence of medically significant organisms in the environments of both the Mir and International Space Station (ISS). Based upon this historical evidence, requirements for short duration usage aboard the Orion Crew Exploration Vehicle and Lunar Lander Vehicle will not require in-flight monitoring; however, as mission duration increases with a Lunar Outpost, an ability to detect microbial hazard will be necessary. The nature of the detection requirements will depend on the maturity of technology in a rapidly evolving marketplace. Regardless, the hardware will still need to maximize information to discipline experts and the crew, while minimizing the size, mass, power consumption, and crew time usage. The refinement of these monitors will be a major goal in our efforts to travel successfully to Mars.

Considerations upon the Machine Learning Technologies

OpenAIRE

Alin Munteanu; Cristina Ofelia Sofran

2006-01-01

Artificial intelligence offers superior techniques and methods by which problems from diverse domains may find an optimal solution. The Machine Learning technologies refer to the domain of artificial intelligence aiming to develop the techniques allowing the computers to “learn”. Some systems based on Machine Learning technologies tend to eliminate the necessity of the human intelligence while the others adopt a man-machine collaborative approach.

48 CFR 3052.204-70 - Security requirements for unclassified information technology resources.

Science.gov (United States)

2010-10-01

... unclassified information technology resources. 3052.204-70 Section 3052.204-70 Federal Acquisition Regulations... for unclassified information technology resources. As prescribed in (HSAR) 48 CFR 3004.470-3, insert a clause substantially the same as follows: Security Requirements for Unclassified Information Technology...

Plant gene technology: social considerations

African Journals Online (AJOL)

Administrator

The genetic modification of plants by gene technology is of immense potential benefits, but there may be possible risks. ... As a new endeavour, however, people have a mixed ... reality by gene biotechnology (Watson, 1997). Industrial ...

Maintaining Continuity of Knowledge (CoK) of Spent Fuel Pools: Tool Survey - Scenarios, Technology Considerations, and Evaluation Criteria

Energy Technology Data Exchange (ETDEWEB)

Benz, Jacob M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Tanner, Jennifer E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Smart, Heidi A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); MacDougall, Matthew R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2016-01-18

The objective of this report is to identify the foundational elements which will drive the survey and evaluation of potential technologies to be considered to maintain CoK of spent fuel within a pool in the potential absence of light or in low light scenarios. These foundational elements include identifying use cases that highlight the type of environments in which the technologies may be asked to operate; the CoK elements required of the technologies, such as unique identification or presence/absence identification; the functional and operational requirements for the technologies; and the criteria against which the technologies will be evaluated.

Parameterized Flight Mission for Secondary Power Requirement Estimations of Commercial Transport Aircraft

OpenAIRE

Lampl, Thomas; Muschkorgel, Sandra; Hornung, Mirko;

2018-01-01

The trend towards More-Electric Aircraft (MEA) and the introduction of new system technologies lead to considerable changes at the system level of commercial transport aircraft. Because the number of systems and power requirements are increasing, the consideration and integration of aircraft systems in early aircraft design phases is important. The objective of this contribution is to develop a characteristic flight mission with modelled aircraft systems to estimate the secondary power requir...

Considerations upon the Machine Learning Technologies

Directory of Open Access Journals (Sweden)

Alin Munteanu

2006-01-01

Full Text Available Artificial intelligence offers superior techniques and methods by which problems from diverse domains may find an optimal solution. The Machine Learning technologies refer to the domain of artificial intelligence aiming to develop the techniques allowing the computers to “learn”. Some systems based on Machine Learning technologies tend to eliminate the necessity of the human intelligence while the others adopt a man-machine collaborative approach.

Waste disposal technology transfer matching requirement clusters for waste disposal facilities in China

International Nuclear Information System (INIS)

Dorn, Thomas; Nelles, Michael; Flamme, Sabine; Jinming, Cai

2012-01-01

Highlights: ► We outline the differences of Chinese MSW characteristics from Western MSW. ► We model the requirements of four clusters of plant owner/operators in China. ► We examine the best technology fit for these requirements via a matrix. ► Variance in waste input affects result more than training and costs. ► For China technology adaptation and localisation could become push, not pull factors. - Abstract: Even though technology transfer has been part of development aid programmes for many decades, it has more often than not failed to come to fruition. One reason is the absence of simple guidelines or decision making tools that help operators or plant owners to decide on the most suitable technology to adopt. Practical suggestions for choosing the most suitable technology to combat a specific problem are hard to get and technology drawbacks are not sufficiently highlighted. Western counterparts in technology transfer or development projects often underestimate or don’t sufficiently account for the high investment costs for the imported incineration plant; the differing nature of Chinese MSW; the need for trained manpower; and the need to treat flue gas, bunker leakage water, and ash, all of which contain highly toxic elements. This article sets out requirements for municipal solid waste disposal plant owner/operators in China as well as giving an attribute assessment for the prevalent waste disposal plant types in order to assist individual decision makers in their evaluation process for what plant type might be most suitable in a given situation. There is no ‘best’ plant for all needs and purposes, and requirement constellations rely on generalisations meaning they cannot be blindly applied, but an alignment of a type of plant to a type of owner or operator can realistically be achieved. To this end, a four-step approach is suggested and a technology matrix is set out to ease the choice of technology to transfer and avoid past errors. The four

Advanced maternal age: ethical and medical considerations for assisted reproductive technology.

Science.gov (United States)

Harrison, Brittany J; Hilton, Tara N; Rivière, Raphaël N; Ferraro, Zachary M; Deonandan, Raywat; Walker, Mark C

2017-01-01

This review explores the ethical and medical challenges faced by women of advanced maternal age who decide to have children. Assisted reproductive technologies (ARTs) make post-menopausal pregnancy physiologically plausible, however, one must consider the associated physical, psychological, and sociological factors involved. A quasi-systematic review was conducted in PubMed and Ovid using the key terms post-menopause, pregnancy + MeSH terms [donations, hormone replacement therapy, assisted reproductive technologies, embryo donation, donor artificial insemination, cryopreservation]. Overall, 28 papers encompassing two major themes (ethical and medical) were included in the review. There are significant ethical considerations and medical (maternal and fetal) complications related to pregnancy in peri- and post-menopausal women. When examining the ethical and sociological perspective, the literature portrays an overall positive attitude toward pregnancy in advanced maternal age. With respect to the medical complications, the general consensus in the evaluated studies suggests that there is greater risk of complication for spontaneous pregnancy when the mother is older (eg, >35 years old). This risk can be mitigated by careful medical screening of the mother and the use of ARTs in healthy women. In these instances, a woman of advanced maternal age who is otherwise healthy can carry a pregnancy with a similar risk profile to that of her younger counterparts when using donated oocytes.

Reliable Thermoelectric Module Design under Opposing Requirements from Structural and Thermoelectric Considerations

Science.gov (United States)

Karri, Naveen K.; Mo, Changki

2018-06-01

Structural reliability of thermoelectric generation (TEG) systems still remains an issue, especially for applications such as large-scale industrial or automobile exhaust heat recovery, in which TEG systems are subject to dynamic loads and thermal cycling. Traditional thermoelectric (TE) system design and optimization techniques, focused on performance alone, could result in designs that may fail during operation as the geometric requirements for optimal performance (especially the power) are often in conflict with the requirements for mechanical reliability. This study focused on reducing the thermomechanical stresses in a TEG system without compromising the optimized system performance. Finite element simulations were carried out to study the effect of TE element (leg) geometry such as leg length and cross-sectional shape under constrained material volume requirements. Results indicated that the element length has a major influence on the element stresses whereas regular cross-sectional shapes have minor influence. The impact of TE element stresses on the mechanical reliability is evaluated using brittle material failure theory based on Weibull analysis. An alternate couple configuration that relies on the industry practice of redundant element design is investigated. Results showed that the alternate configuration considerably reduced the TE element and metallization stresses, thereby enhancing the structural reliability, with little trade-off in the optimized performance. The proposed alternate configuration could serve as a potential design modification for improving the reliability of systems optimized for thermoelectric performance.

Overall process considerations for using dilute acid cellulose hydrolysis technology to produce ethanol from biomass

International Nuclear Information System (INIS)

Elander, R.; Ibsen, K.; Hayward, T.; Nagle, N.; Torget, R.

1997-01-01

Recent advances in reactors, designed for the dilute acid thermochemical treatment of biomass, have resulted in the development of process alternatives in which both cellulose and hemicellulose are hydrolyzed to soluble sugars in high yields. The optimal extent of cellulose hydrolysis will depend on both the performance and economics of the thermochemical treatment operation, and on subsequent unit operations in the bioethanol production process. Examples of subsequent unit operation interactions include the extent to which cellulase enzymes are used to hydrolyze any remaining cellulose, kinetics and conditions of a largely soluble mixed sugar cofermentation, and the extent to which removal of compounds that inhabit fermenting microorganisms is required. In addition, a number of process operation and economic considerations affect the ultimate economic viability of this type of biomass hydrolysis process. These considerations include reactor design issues to accommodate the kinetic parameters of the various hydrolysis and sugar degradation reactions, liquid volume requirements to achieve acceptable sugar yields, sugar concentrations that result from such a process and their impact on subsequent fermentation volumes and ethanol recovery operations, potential co-product opportunities that result from solubilized lignin, and process steam requirements. Several potential whole-process configurations are presented and key process and economic issues for each are discussed. (author)

Technology-Use Mediation

DEFF Research Database (Denmark)

Bansler, Jørgen P.; Havn, Erling C.

2003-01-01

This study analyzes how a group of ‘mediators’ in a large, multinational company adapted a computer-mediated communication technology (a ‘virtual workspace’) to the organizational context (and vice versa) by modifying features of the technology, providing ongoing support for users, and promoting...... appropriate conventions of use. Our findings corroborate earlier research on technology-use mediation, which suggests that such mediators can exert considerable influence on how a particular technology will be established and used in an organization. However, this study also indicates that the process...... of technology-use mediation is more complex and indeterminate than earlier literature suggests. In particular, we want to draw attention to the fact that advanced computer-mediated communication technologies are equivocal and that technology-use mediation consequently requires ongoing sensemaking (Weick 1995)....

Actor-Network Theory as a sociotechnical lens to explore the relationship of nurses and technology in practice: methodological considerations for nursing research.

Science.gov (United States)

Booth, Richard G; Andrusyszyn, Mary-Anne; Iwasiw, Carroll; Donelle, Lorie; Compeau, Deborah

2016-06-01

Actor-Network Theory is a research lens that has gained popularity in the nursing and health sciences domains. The perspective allows a researcher to describe the interaction of actors (both human and non-human) within networked sociomaterial contexts, including complex practice environments where nurses and health technology operate. This study will describe Actor-Network Theory and provide methodological considerations for researchers who are interested in using this sociotechnical lens within nursing and informatics-related research. Considerations related to technology conceptualization, levels of analysis, and sampling procedures in Actor-Network Theory based research are addressed. Finally, implications for future nursing research within complex environments are highlighted. © 2015 John Wiley & Sons Ltd.

Advanced Reactor Technologies - Regulatory Technology Development Plan (RTDP)

Energy Technology Data Exchange (ETDEWEB)

Moe, Wayne L. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2017-08-23

This DOE-NE Advanced Small Modular Reactor (AdvSMR) regulatory technology development plan (RTDP) will link critical DOE nuclear reactor technology development programs to important regulatory and policy-related issues likely to impact a “critical path” for establishing a viable commercial AdvSMR presence in the domestic energy market. Accordingly, the regulatory considerations that are set forth in the AdvSMR RTDP will not be limited to any one particular type or subset of advanced reactor technology(s) but rather broadly consider potential regulatory approaches and the licensing implications that accompany all DOE-sponsored research and technology development activity that deal with commercial non-light water reactors. However, it is also important to remember that certain “minimum” levels of design and safety approach knowledge concerning these technology(s) must be defined and available to an extent that supports appropriate pre-licensing regulatory analysis within the RTDP. Final resolution to advanced reactor licensing issues is most often predicated on the detailed design information and specific safety approach as documented in a facility license application and submitted for licensing review. Because the AdvSMR RTDP is focused on identifying and assessing the potential regulatory implications of DOE-sponsored reactor technology research very early in the pre-license application development phase, the information necessary to support a comprehensive regulatory analysis of a new reactor technology, and the resolution of resulting issues, will generally not be available. As such, the regulatory considerations documented in the RTDP should be considered an initial “first step” in the licensing process which will continue until a license is issued to build and operate the said nuclear facility. Because a facility license application relies heavily on the data and information generated by technology development studies, the anticipated regulatory

Advanced Reactor Technology -- Regulatory Technology Development Plan (RTDP)

Energy Technology Data Exchange (ETDEWEB)

Moe, Wayne Leland [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-05-01

This DOE-NE Advanced Small Modular Reactor (AdvSMR) regulatory technology development plan (RTDP) will link critical DOE nuclear reactor technology development programs to important regulatory and policy-related issues likely to impact a “critical path” for establishing a viable commercial AdvSMR presence in the domestic energy market. Accordingly, the regulatory considerations that are set forth in the AdvSMR RTDP will not be limited to any one particular type or subset of advanced reactor technology(s) but rather broadly consider potential regulatory approaches and the licensing implications that accompany all DOE-sponsored research and technology development activity that deal with commercial non-light water reactors. However, it is also important to remember that certain “minimum” levels of design and safety approach knowledge concerning these technology(s) must be defined and available to an extent that supports appropriate pre-licensing regulatory analysis within the RTDP. Final resolution to advanced reactor licensing issues is most often predicated on the detailed design information and specific safety approach as documented in a facility license application and submitted for licensing review. Because the AdvSMR RTDP is focused on identifying and assessing the potential regulatory implications of DOE-sponsored reactor technology research very early in the pre-license application development phase, the information necessary to support a comprehensive regulatory analysis of a new reactor technology, and the resolution of resulting issues, will generally not be available. As such, the regulatory considerations documented in the RTDP should be considered an initial “first step” in the licensing process which will continue until a license is issued to build and operate the said nuclear facility. Because a facility license application relies heavily on the data and information generated by technology development studies, the anticipated regulatory

75 FR 52472 - Spectrum Requirements for Advanced Medical Technologies

Science.gov (United States)

2010-08-26

... medical devices. Under this framework, the rules for MedRadio service incorporates the MICS ``core'' band... Requirements for Advanced Medical Technologies AGENCY: Federal Communications Commission. ACTION: Final rule.... (Medtronic) regarding rules for the Medical Device Radiocommunication (MedRadio) service. The Commission...

Considerations in recycling contaminated scrap metal and rubble

International Nuclear Information System (INIS)

Kluk, A.F.; Hocking, E.K.

1992-01-01

Management options for the Department of Energy's increasing amounts of contaminated scrap metal and rubble include reuse as is, disposal, and recycling. Recycling, with its promise of resource recovery, virgin materials conservation, and land disposal minimization, emerges as a preferred management technique. Implementing a cost effective recycling program requires resolution of several issues including: establishing release limits for contaminants, controlling use of recycled materials creating effective public communication programs; developing economical, reliable assay technologies; managing secondary waste streams, expanding availability of unrestricted markets; and solving conflicting legal considerations

Considerations in the development of circulating tumor cell technology for clinical use

Directory of Open Access Journals (Sweden)

Parkinson David R

2012-07-01

Full Text Available Abstract This manuscript summarizes current thinking on the value and promise of evolving circulating tumor cell (CTC technologies for cancer patient diagnosis, prognosis, and response to therapy, as well as accelerating oncologic drug development. Moving forward requires the application of the classic steps in biomarker development–analytical and clinical validation and clinical qualification for specific contexts of use. To that end, this review describes methods for interactive comparisons of proprietary new technologies, clinical trial designs, a clinical validation qualification strategy, and an approach for effectively carrying out this work through a public-private partnership that includes test developers, drug developers, clinical trialists, the US Food & Drug Administration (FDA and the US National Cancer Institute (NCI.

Space Tourism: Orbital Debris Considerations

Science.gov (United States)

Mahmoudian, N.; Shajiee, S.; Moghani, T.; Bahrami, M.

2002-01-01

Space activities after a phase of research and development, political competition and national prestige have entered an era of real commercialization. Remote sensing, earth observation, and communication are among the areas in which this growing industry is facing competition and declining government money. A project like International Space Station, which draws from public money, has not only opened a window of real multinational cooperation, but also changed space travel from a mere fantasy into a real world activity. Besides research activities for sending man to moon and Mars and other outer planets, space travel has attracted a considerable attention in recent years in the form of space tourism. Four countries from space fairing nations are actively involved in the development of space tourism. Even, nations which are either in early stages of space technology development or just beginning their space activities, have high ambitions in this area. This is worth noting considering their limited resources. At present, trips to space are available, but limited and expensive. To move beyond this point to generally available trips to orbit and week long stays in LEO, in orbital hotels, some of the required basic transportations, living requirements, and technological developments required for long stay in orbit are already underway. For tourism to develop to a real everyday business, not only the price has to come down to meaningful levels, but also safety considerations should be fully developed to attract travelers' trust. A serious hazard to space activities in general and space tourism in particular is space debris in earth orbit. Orbiting debris are man-made objects left over by space operations, hazardous to space missions. Since the higher density of debris population occurs in low earth orbit, which is also the same orbit of interest to space tourism, a careful attention should be paid to the effect of debris on tourism activities. In this study, after a

Advanced LBB methodology and considerations

International Nuclear Information System (INIS)

Olson, R.; Rahman, S.; Scott, P.

1997-01-01

LBB applications have existed in many industries and more recently have been applied in the nuclear industry under limited circumstances. Research over the past 10 years has evolved the technology so that more advanced consideration of LBB can now be given. Some of the advanced considerations for nuclear plants subjected to seismic loading evaluations are summarized in this paper

Advanced LBB methodology and considerations

Energy Technology Data Exchange (ETDEWEB)

Olson, R.; Rahman, S.; Scott, P. [Battelle, Columbus, OH (United States)] [and others

1997-04-01

LBB applications have existed in many industries and more recently have been applied in the nuclear industry under limited circumstances. Research over the past 10 years has evolved the technology so that more advanced consideration of LBB can now be given. Some of the advanced considerations for nuclear plants subjected to seismic loading evaluations are summarized in this paper.

23 CFR 950.5 - Requirement to use electronic toll collection technology.

Science.gov (United States)

2010-04-01

... shall use an electronic toll collection system as the method for collecting tolls from vehicle operators... 23 Highways 1 2010-04-01 2010-04-01 false Requirement to use electronic toll collection technology... TRANSPORTATION SYSTEMS ELECTRONIC TOLL COLLECTION § 950.5 Requirement to use electronic toll collection...

Footprints of alien technology

Science.gov (United States)

Davies, P. C. W.

2012-04-01

If alien civilizations do, or did, exist, their technology will impact their environment. Some consideration has been given to the detection of large-scale astro-engineering, such as Dyson spheres. However, a very advanced technology might leave more subtle footprints requiring sophisticated scientific methods to uncover. We must not overlook the possibility that alien technology has impacted our immediate astronomical environment, even Earth itself, but probably a very long time ago. This raises the question of what traces, if anything, might remain today. I shall consider the possibilities of biological, geological and physical traces, and suggest ways that we might search for them.

The removal of the consideration requirement, and the consequent clarification on duress, for verbal modifications to Irish construction contracts

OpenAIRE

Mooney, Conor Francis Joseph

2015-01-01

peer-reviewed This thesis studies the consideration requirement for verbally-made contract variations in Irish construction contracts, and proposes how this specific circumstance can be best served by the law of contract. Construction is a complex and uncertain industry; and an effective construction industry is important and necessary for Ireland: it is a key driver of a functioning, developed economy, and it requires a sustainable level of activity to maintain infrastructu...

Nuclear imaging technology and global requirements

International Nuclear Information System (INIS)

Lele, R.D.

1991-01-01

After a brief review of the present state of availability of nuclear medicine services in the countries of world, a mention has been made of WHO programme on nuclear medicine. Nuclear medicine services in the developing countries are dependent on the availability of appropriate instrumentation and radiopharmaceuticals at affordable costs and existence of basic infrastructure required for giving such services. Basic infrastructure requirements are stable power supplies, air-conditioning systems, preventive maintenance and repair facilities. These are discussed. It is pointed out that the use of rectilinear scanners with 113m In instead of costly gamma cameras is still relevant in the third world countries. Need to develop a too low-cost gamma camera is emphasized. Electronics Corporation of India Ltd has plans to manufacture such cameras. Design of this camera is described. Foreign collaboration or technology transfer through concerned governement department needs to be explored so that the benefits of nuclear medicine can be brought to the third world countries by 2000 AD. (M.G.B.). 2 tabs

75 FR 28554 - Elimination of Classification Requirement in the Green Technology Pilot Program

Science.gov (United States)

2010-05-21

...] Elimination of Classification Requirement in the Green Technology Pilot Program AGENCY: United States Patent... (USPTO) implemented the Green Technology Pilot Program on December 8, 2009, which permits patent... technologies. However, the pilot program was limited to only applications classified in a number of U.S...

Step 1: Human System Integration (HSI) FY05 Pilot-Technology Interface Requirements for Contingency Management

Science.gov (United States)

2005-01-01

This document involves definition of technology interface requirements for Contingency Management. This was performed through a review of Contingency Management-related, HSI requirements documents, standards, and recommended practices. Technology concepts in use by the Contingency Management Work Package were considered. Beginning with HSI high-level functional requirements for Contingency Management, and Contingency Management technology elements, HSI requirements for the interface to the pilot were identified. Results of the analysis describe (1) the information required by the pilot to have knowledge of system failures and associated contingency procedures, and (2) the control capability needed by the pilot to obtain system status and procedure information. Fundamentally, these requirements provide the candidate Contingency Management technology concepts with the necessary human-related elements to make them compatible with human capabilities and limitations. The results of the analysis describe how Contingency Management operations and functions should interface with the pilot to provide the necessary Contingency Management functionality to the UA-pilot system. Requirements and guidelines for Contingency Management are partitioned into four categories: (1) Health and Status and (2) Contingency Management. Each requirement is stated and is supported with a rationale and associated reference(s).

Waste disposal technology transfer matching requirement clusters for waste disposal facilities in China.

Science.gov (United States)

Dorn, Thomas; Nelles, Michael; Flamme, Sabine; Jinming, Cai

2012-11-01

Even though technology transfer has been part of development aid programmes for many decades, it has more often than not failed to come to fruition. One reason is the absence of simple guidelines or decision making tools that help operators or plant owners to decide on the most suitable technology to adopt. Practical suggestions for choosing the most suitable technology to combat a specific problem are hard to get and technology drawbacks are not sufficiently highlighted. Western counterparts in technology transfer or development projects often underestimate or don't sufficiently account for the high investment costs for the imported incineration plant; the differing nature of Chinese MSW; the need for trained manpower; and the need to treat flue gas, bunker leakage water, and ash, all of which contain highly toxic elements. This article sets out requirements for municipal solid waste disposal plant owner/operators in China as well as giving an attribute assessment for the prevalent waste disposal plant types in order to assist individual decision makers in their evaluation process for what plant type might be most suitable in a given situation. There is no 'best' plant for all needs and purposes, and requirement constellations rely on generalisations meaning they cannot be blindly applied, but an alignment of a type of plant to a type of owner or operator can realistically be achieved. To this end, a four-step approach is suggested and a technology matrix is set out to ease the choice of technology to transfer and avoid past errors. The four steps are (1) Identification of plant owner/operator requirement clusters; (2) Determination of different municipal solid waste (MSW) treatment plant attributes; (3) Development of a matrix matching requirement clusters to plant attributes; (4) Application of Quality Function Deployment Method to aid in technology localisation. The technology transfer matrices thus derived show significant performance differences between the

Base technology development enhances state-of-the-art in meeting performance requirements

International Nuclear Information System (INIS)

Freedman, J.M.; Allen, G.C. Jr.; Luna, R.E.

1987-01-01

Sandia National Laboratories (SNL) has responsibility to the United States Department of Energy (DOE) for baseline technology to support the design of radioactive material transportation packages. To fulfill this responsibility, SNL works with industry, government agencies, and national laboratories to identify and develop state-of-the-art technology required to design and test safe, cost-effective radioactive materials packages. Principal elements of the base technology program include: 1) analysis techniques, 2) testing, 3) subsystem and component development, 4) packaging systems development support, and 5) technical support for policy development. These program elements support a systems approach for meeting performance requirements and assure that there is a sound underlying technical basis for both transportation packaging design and associated policy decisions. Highlights from the base technology program included in this paper are testing, design and analysis methods, advanced materials, risk assessment and logistics models, and transportation package support

28 CFR 51.34 - Expedited consideration.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Expedited consideration. 51.34 Section 51... consideration. (a) When a submitting authority is required under State law or local ordinance or otherwise finds... the submission be given expedited consideration. The submission should explain why such consideration...

Emerging Technologies and Ethics: A Race-to-the-Bottom or the Top?

NARCIS (Netherlands)

Gouvea, R.; Linton, J.D.; Linton, Jonathan; Montoya, M.; Walsh, Steven Thomas

2012-01-01

Does national success with an emerging technology require ethical sacrifices? This question is considered through the simultaneous consideration of ethics, investment, and outcomes in the nine jurisdictions that are making the largest investments in nanotechnologies—an important emerging technology.

Appraisal of Information Technology Requirements in Quantity Surveying Firms in Northern Nigeria

Directory of Open Access Journals (Sweden)

Y. U. Datti

2017-06-01

Full Text Available A worrisome trend in the adoption of emerging technologies for competitive advantages and improved productivities by QSs have been observed in that there is overwhelming evidence that there is an increasing usage of IT in quantity surveying firms but little or no noticeable benefits on the practice. It however becomes pertinent to ask then, that despite the increases adoption of computing and telecommunication technologies, why isn’t there any noticeable change due to the impacts of IT in the Nigerian Construction Industry with particular reference to Quantity Surveying practices. The study appraised the requirement of IT in quantity surveying practice in Nigeria. It examined the position of IT in quantity surveying firms in terms of its requirement and analyzed IT requirements-based problem constraining quantity surveying firms. The study is a survey research designed to obtain information on information technology in QS firms. A self-administered questionnaire was employed to quantity surveyors in consulting firms for responses. Responses were returned and analyzed using severity index and later ranked in order of importance. The results indicate a high level of computerization of professional services among the firms with greater number of their computers being networked. However, despite high level of networking of available computers, sharing of printers and other scarce tools/technologies are not established. Compared to developed countries such as Canada, Australia, United Kingdom and USA, the position of IT requirements in QS firms in Nigeria can be said to be at basic level with organization possessing and applying basic IT tools and technologies (e.g. scanners, digital cameras, dvd/cd-rom, general purpose software, QS application software, chat programs etc. in their daily operation and processes. While most firms are progressing toward intermediate level by possessing intermediate IT tools and technologies (e.g. teleconferencing

Effect of technology on quality assurance

International Nuclear Information System (INIS)

Purvis, E.E. III

1984-01-01

Optimizing Quality Assurance activities by taking advantage of technological improvements is an issue directly related to overall product cost, quality, and delivery schedules. Use of automated tooling and numerical control have reduced manufacturing cycle time and thereby enabled better response to changing consumer tastes and market demand. Non-nuclear industries are using computer-aided technology for in-process inspection and final product acceptance. Non-destructive examination can also be performed real-time, on the production line. The challenge faced by the nuclear industry is to make the best use of new and emerging technology while satisfying compliance requirements. Currently, use of new methods is hampered by uncertainty about the affect on regulatory issues. Ways of using the technology have been developed for commercial applications without consideration of nuclear requirements

The role of a research and development institute in the development and diffusion of technology

NARCIS (Netherlands)

Bongenaar, B.; Szirmai, A.

1999-01-01

In the context of late industrialisation the effective transfer and adaptation of technology is of great importance for economic development. International technology transfer is not a costless process, but requires considerable technological effort and investments in the development of

15 CFR 1160.4 - Antitrust considerations.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Antitrust considerations. 1160.4 Section 1160.4 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) TECHNOLOGY ADMINISTRATION, DEPARTMENT OF COMMERCE PRODUCTIVITY, TECHNOLOGY AND INNOVATION Promotion of...

Advanced Reactor Technology -- Regulatory Technology Development Plan (RTDP)

International Nuclear Information System (INIS)

Moe, Wayne Leland

2015-01-01

This DOE-NE Advanced Small Modular Reactor (AdvSMR) regulatory technology development plan (RTDP) will link critical DOE nuclear reactor technology development programs to important regulatory and policy-related issues likely to impact a ''critical path'' for establishing a viable commercial AdvSMR presence in the domestic energy market. Accordingly, the regulatory considerations that are set forth in the AdvSMR RTDP will not be limited to any one particular type or subset of advanced reactor technology(s) but rather broadly consider potential regulatory approaches and the licensing implications that accompany all DOE-sponsored research and technology development activity that deal with commercial non-light water reactors. However, it is also important to remember that certain ''minimum'' levels of design and safety approach knowledge concerning these technology(s) must be defined and available to an extent that supports appropriate pre-licensing regulatory analysis within the RTDP. Final resolution to advanced reactor licensing issues is most often predicated on the detailed design information and specific safety approach as documented in a facility license application and submitted for licensing review. Because the AdvSMR RTDP is focused on identifying and assessing the potential regulatory implications of DOE-sponsored reactor technology research very early in the pre-license application development phase, the information necessary to support a comprehensive regulatory analysis of a new reactor technology, and the resolution of resulting issues, will generally not be available. As such, the regulatory considerations documented in the RTDP should be considered an initial ''first step'' in the licensing process which will continue until a license is issued to build and operate the said nuclear facility. Because a facility license application relies heavily on the data and information generated by

Laser power beaming applications and technology

Science.gov (United States)

Burke, Robert J.; Cover, Ralph A.; Curtin, Mark S.; Dinius, R.; Lampel, Michael C.

1994-05-01

Beaming laser energy to spacecraft has important economic potential. It promises significant reduction in the cost of access to space, for commercial and government missions. While the potential payoff is attractive, existing technologies perform the same missions and the keys to market penetration for power beaming are a competitive cost and a schedule consistent with customers' plans. Rocketdyne is considering these questions in the context of a commercial enterprise -- thus, evaluation of the requirements must be done based on market assessments and recognition that significant private funding will be involved. It is in the context of top level business considerations that the technology requirements are being assessed and the program being designed. These considerations result in the essential elements of the development program. Since the free electron laser is regarded as the `long pole in the tent,' this paper summarizes Rocketdyne's approach for a timely, cost-effective program to demonstrate an FEL capable of supporting an initial operating capability.

Tritium interactions of potential importance to fusion reactor systems: technology requirements

International Nuclear Information System (INIS)

Wilkes, W.R.

1976-01-01

The tritium technology requirements created by the controlled thermonuclear research program to develop a demonstration fusion power reactor by the year 2000 are reviewed. It is found that the majority of the technological advances which are needed to ensure adequate tritium containment in a tritium breeding power reactor need to be demonstrated on a pilot scale by approximately 1983, so that they may be incorporated into EPR-II, the second of two planned experimental power reactors. The most important advances include development of containment materials with permeabilities to tritium well below measured values for stainless steel; large scale, low inventory deuterium-tritium separation systems; and improved monitoring and assay systems. There are less critical requirements for information about the effects of tritium and helium on the mechanical properties of materials, the effects of tritium on biological systems, and data on physical and chemical properties of tritium. Substantial progress needs to be made on these problems early enough to permit possible solutions to be tested on EPR-I. In addition, major improvements in tritium handling equipment are required for EPR-I. Those technological problems for which solutions have not yet been demonstrated by EPR-II must be solved by 1989 if they are to be assured successful application in the demonstration reactor

Technology requirements for commercial applications of inertial confinement fusion

International Nuclear Information System (INIS)

Frank, T.G.; Rossi, C.E.

1981-01-01

Current inertial confinement fusion (ICF) research is directed primarily at physics experiments intended to provide confidence in the scientific feasibility of the basic concept. In conjunction with these experiments, a variety of laser and particle beam drivers having potential for eventual use in fusion power plants is being developed. Expectations are that the scientific feasibility of ICF will be demonstrated in the latter part of the 1980s. At that time, the emphasis of the program will shift to engineering, economic, environmental, and licensing issues with the necessary technology development effort continuing into the early part of the next century. This paper discusses the technology requirements for the successive phases of engineering development leading to commercial application of ICF. The engineering areas requiring significant effort for ICF application include high average power driver development; pulsed high-energy power supply development; reactor cavity and heat transport system design; tritium extraction and control; commercial pellet development; pellet injection, tracking, and targeting systems design; materials radiation, fatigue, and corrosion behavior; and reactor plant systems integration and demonstration

A Cognitive Systems Engineering Approach to Developing HMI Requirements for New Technologies

Science.gov (United States)

Fern, Lisa Carolynn

2016-01-01

This document examines the challenges inherent in designing and regulating to support human-automation interaction for new technologies that will deployed into complex systems. A key question for new technologies, is how work will be accomplished by the human and machine agents. This question has traditionally been framed as how functions should be allocated between humans and machines. Such framing misses the coordination and synchronization that is needed for the different human and machine roles in the system to accomplish their goals. Coordination and synchronization demands are driven by the underlying human-automation architecture of the new technology, which are typically not specified explicitly by the designers. The human machine interface (HMI) which is intended to facilitate human-machine interaction and cooperation, however, typically is defined explicitly and therefore serves as a proxy for human-automation cooperation requirements with respect to technical standards for technologies. Unfortunately, mismatches between the HMI and the coordination and synchronization demands of the underlying human-automation architecture, can lead to system breakdowns. A methodology is needed that both designers and regulators can utilize to evaluate the expected performance of a new technology given potential human-automation architectures. Three experiments were conducted to inform the minimum HMI requirements a detect and avoid system for unmanned aircraft systems (UAS). The results of the experiments provided empirical input to specific minimum operational performance standards that UAS manufacturers will have to meet in order to operate UAS in the National Airspace System (NAS). These studies represent a success story for how to objectively and systematically evaluate prototype technologies as part of the process for developing regulatory requirements. They also provide an opportunity to reflect on the lessons learned from a recent research effort in order to

Advances in riser and pipeline technologies

Energy Technology Data Exchange (ETDEWEB)

Kan, Wan C.; Mortazavi, Mehrdad; Weir, Michael S. [ExxonMobil Development Company, Dallas, TX (United States)

2009-12-19

As oil and gas production continues to move into new frontier areas, novel applications of the existing riser and pipeline technologies need to be developed to meet the often more stringent requirements encountered in these environments. The challenges include ultra deep water, harsh environments, aggressive fluid conditions, and local content objectives, etc. They will require industry to constantly extend, expand, and enhance the broad range of solution options. Also, the existing design criteria in industry may need to be revised or new criteria may need to be developed to satisfy these needs. Exxon Mobil (Em) employs, and works with others in industry to promote robust design and operating practices. This approach requires in-depth understanding, sound engineering principles, advanced analysis, uncertainty management, and supportive qualification test data. It enables confident selection, extrapolation, and innovation of technologies to address new riser system and pipeline challenges. Focus on fundamental is imperative to ensure integrity of the selected systems during fabrication, installation, and operation phases. Recent and past project experience in deep water Gulf of Mexico and West Africa provides many successful examples of this approach. This paper reviews several examples of the key riser system and pipeline technology enhancements recently achieved by EM to provide confidence in addressing technical and project application challenges. Riser system technology enhancements addressed in this paper include steel catenary riser (SCR) application on turret-moored FPSO with severe motions, pipe-in-pipe (PIP) hybrid production riser to effectively manage gas lift and flow assurance requirements, irregular wave analysis methodology for flexible risers and umbilicals to reduce conservatism, and qualification of riser and pipeline VIV prediction and mitigation methods. Pipeline technology enhancements detailed in this paper include lateral buckling prediction

Developmental Challenges of SMES Technology for Applications

Science.gov (United States)

Rong, Charles C.; Barnes, Paul N.

2017-12-01

This paper reviews the current status of high temperature superconductor (HTS) based superconducting magnetic energy storage (SMES) technology as a developmental effort. Discussion centres on the major challenges in magnet optimization, loss reduction, cooling improvement, and new development of quench detection. The cryogenic operation for superconductivity in this technological application requires continued research and development, especially with a greater engineering effort that involves the end user. For the SMES-based technology to more fully mature, some suggestions are given for consideration and discussion.

Requirements and solutions for future pellet technology; Krav och loesningar foer framtidens pelletsteknik

Energy Technology Data Exchange (ETDEWEB)

Paulrud, Susanne; Roennbaeck, Marie; Ryde, Daniel; Laitila, Thomas

2010-07-01

Requirements and solutions for future pellet burning technologies Since 2006, sales of pellet burning technologies to the Swedish residential market have fallen. The main reasons for this decrease are: many of the economically favorable easy conversions from oil to pellets have been made; competition from heat pumps; warm winters; a stable electricity price; and the current structure of heating in residential buildings, where electric heating dominates. To change this falling trend pellets need to become more attractive to consumers. This project aimed to analyze the requirements for the next generation of pellets systems and to develop potential solutions, in collaboration with the pellets industry. More specifically, the study looked at consumers' attitudes toward heating choices and different heating through a survey to 2000 house owners across Sweden. The project included a market analysis of Swedish and international technologies and examines the conditions for Swedish pellet burning technology in different markets. In addition, new solutions and developments for Swedish pellets burning technology are described

42 CFR 495.338 - Health information technology implementation advance planning document requirements (HIT IAPD).

Science.gov (United States)

2010-10-01

... 42 Public Health 5 2010-10-01 2010-10-01 false Health information technology implementation... CERTIFICATION STANDARDS FOR THE ELECTRONIC HEALTH RECORD TECHNOLOGY INCENTIVE PROGRAM Requirements Specific to the Medicaid Program § 495.338 Health information technology implementation advance planning document...

Considerations on the DEMO pellet fuelling system

Energy Technology Data Exchange (ETDEWEB)

Lang, P.T., E-mail: peter.lang@ipp.mpg.de [Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, 85748 Garching (Germany); Day, Ch. [Karlsruhe Institute of Technology, 76021 Karlsruhe (Germany); Fable, E. [Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, 85748 Garching (Germany); Igitkhanov, Y. [Karlsruhe Institute of Technology, 76021 Karlsruhe (Germany); Köchl, F. [Association EURATOM-Ö AW/ATI, Atominstitut, TU Wien, 1020 Vienna (Austria); Mooney, R. [Culham Centre for Fusion Energy, Culham Science Centre, Oxfordshire OX14 3DB (United Kingdom); Pegourie, B. [CEA, IRFM, 13108 Saint-Paul-lez-Durance (France); Ploeckl, B. [Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, 85748 Garching (Germany); Wenninger, R. [Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, 85748 Garching (Germany); EFDA, Garching (Germany); Zohm, H. [Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, 85748 Garching (Germany)

2015-10-15

Graphical abstract: - Highlights: • Considerations are made for a core particle fuelling system covering all DEMO requirements. • Particle deposition beyond the pedestal top is needed to achieve efficient fuelling. • Conventional pellet technology enabling launching from the torus inboard side can be used. • Efforts have been taken for integrating a suitable pellet guiding system into the EU DEMO model. • In addition, further techniques bearing potential for advanced fuelling performance are considered. - Abstract: The Demonstration Fusion Power Reactor DEMO is the step foreseen to bridge the gap between ITER and the first commercial fusion power plant. One key element in the European work plan for DEMO is the elaboration of a conceptual design for a suitable core particle fuelling system. First considerations for such a system are presented in this contribution. Following the well-considered ITER solution, most analysis performed in this study assumes conventional pellet technology will be used for the fuelling system. However, taking advantage of the less compressed time frame for the DEMO project, several other techniques thought to bear potential for advanced fuelling performance are considered as well. In a first, basic analysis all actuation parameters at hand and their implications on the fuelling performance were considered. Tentative transport modeling of a reference scenario strongly indicates only particles deposited inside the plasma pedestal allow for efficient fuelling. Shallow edge fuelling results in an unbearable burden on the fuel cycle. Sufficiently deep particle deposition seems technically achievable, provided pellets are launched from the torus inboard at sufficient speed. All components required for a DEMO pellet system capable for high speed inboard pellet launch are already available or can be developed in due time with reasonable efforts. Furthermore, steps to integrate this solution into the EU DEMO model are taken.

Considerations on the DEMO pellet fuelling system

International Nuclear Information System (INIS)

Lang, P.T.; Day, Ch.; Fable, E.; Igitkhanov, Y.; Köchl, F.; Mooney, R.; Pegourie, B.; Ploeckl, B.; Wenninger, R.; Zohm, H.

2015-01-01

Graphical abstract: - Highlights: • Considerations are made for a core particle fuelling system covering all DEMO requirements. • Particle deposition beyond the pedestal top is needed to achieve efficient fuelling. • Conventional pellet technology enabling launching from the torus inboard side can be used. • Efforts have been taken for integrating a suitable pellet guiding system into the EU DEMO model. • In addition, further techniques bearing potential for advanced fuelling performance are considered. - Abstract: The Demonstration Fusion Power Reactor DEMO is the step foreseen to bridge the gap between ITER and the first commercial fusion power plant. One key element in the European work plan for DEMO is the elaboration of a conceptual design for a suitable core particle fuelling system. First considerations for such a system are presented in this contribution. Following the well-considered ITER solution, most analysis performed in this study assumes conventional pellet technology will be used for the fuelling system. However, taking advantage of the less compressed time frame for the DEMO project, several other techniques thought to bear potential for advanced fuelling performance are considered as well. In a first, basic analysis all actuation parameters at hand and their implications on the fuelling performance were considered. Tentative transport modeling of a reference scenario strongly indicates only particles deposited inside the plasma pedestal allow for efficient fuelling. Shallow edge fuelling results in an unbearable burden on the fuel cycle. Sufficiently deep particle deposition seems technically achievable, provided pellets are launched from the torus inboard at sufficient speed. All components required for a DEMO pellet system capable for high speed inboard pellet launch are already available or can be developed in due time with reasonable efforts. Furthermore, steps to integrate this solution into the EU DEMO model are taken.

Technology transfer for women entrepreneurs: issues for consideration.

Science.gov (United States)

Everts, S I

1998-01-01

This article discusses the effectiveness of technology transfers to women entrepreneurs in developing countries. Most women's enterprises share common characteristics: very small businesses, employment of women owners and maybe some family members, limited working capital, low profit margins, and flexible or part-time work. Many enterprises do not plan for growth. Women tend to diversify and use risk-avoidance strategies. Support for women's enterprises ignores the characteristics of women's enterprises. Support mechanisms could be offered that would perfect risk-spreading strategies and dynamic enterprise management through other means than growth. Many initiatives, since the 1970s, have transferred technologies to women. Technologies were applied to only a few domains and were viewed as appropriate based on their small size, low level of complexity, low cost, and environmental friendliness. Technology transfers may not be viewed by beneficiaries as the appropriate answer to needs. The bottleneck in transfers to women is not in the development of prototypes, but in the dissemination of technology that is sustainable, appropriate, and accessible. Key features for determining appropriateness include baseline studies, consumer linkages, and a repetitive process. Institutional factors may limit appropriateness. There is a need for long-term outputs, better links with users, training in use of the technology, grouping of women into larger units, and technology availability in quantities large enough to meet demand. Guidelines need to be developed that include appropriate content and training that ensures transfer of knowledge to practice.

Design and application consideration of high temperature superconducting current leads

International Nuclear Information System (INIS)

Wu, J.L.

1994-01-01

As a potential major source of heat leak and the resultant cryogen boiloff, cryogenic current leads can significantly affect the refrigeration power requirement of cryogenic power equipment. Reduction of the heat leak associated with current leads can therefore contribute to the development and application of this equipment. Recent studies and tests have demonstrated that, due to their superconducting and low thermal conductivity properties, ceramic high temperature superconductor (HTSC) can be employed in current leads to significantly reduce the heat leak. However, realization of this benefit requires special design considerations pertaining to the properties and the fabrication technology of the relatively new ceramic superconductor materials. Since processing and fabrication technology are continuously being developed in the laboratories, data on material properties unrelated to critical states are quite limited. Therefore, design analysis and experiments have to be conducted in tandem to achieve a successful development. Due to the rather unique combination of superconducting and thermal conductivities which are orders of magnitude lower than copper, ceramic superconductors allow expansion of the operating scenarios of current leads. In addition to the conventional vapor-cooled lead type application, low heat leak conduction-cooled type current leads may be practical and are being developed. Furthermore, a current lead with an intermediate heat leak intercept has been successfully demonstrated in a multiple current lead assembly employing HTSC. These design and application considerations of high temperature superconducting current leads are addressed here

40 CFR 270.3 - Considerations under Federal law.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 26 2010-07-01 2010-07-01 false Considerations under Federal law. 270... Considerations under Federal law. The following is a list of Federal laws that may apply to the issuance of... applicable law requires consideration or adoption of particular permit conditions or requires the denial of a...

Thermal processing system concepts and considerations for RWMC buried waste

International Nuclear Information System (INIS)

Eddy, T.L.; Kong, P.C.; Raivo, B.D.; Anderson, G.L.

1992-02-01

This report presents a preliminary determination of ex situ thermal processing system concepts and related processing considerations for application to remediation of transuranic (TRU)-contaminated buried wastes (TRUW) at the Radioactive Waste Management Complex (RWMC) of the Idaho National Engineering Laboratory (INEL). Beginning with top-level thermal treatment concepts and requirements identified in a previous Preliminary Systems Design Study (SDS), a more detailed consideration of the waste materials thermal processing problem is provided. Anticipated waste stream elements and problem characteristics are identified and considered. Final waste form performance criteria, requirements, and options are examined within the context of providing a high-integrity, low-leachability glass/ceramic, final waste form material. Thermal processing conditions required and capability of key systems components (equipment) to provide these material process conditions are considered. Information from closely related companion study reports on melter technology development needs assessment and INEL Iron-Enriched Basalt (IEB) research are considered. Five potentially practicable thermal process system design configuration concepts are defined and compared. A scenario for thermal processing of a mixed waste and soils stream with essentially no complex presorting and using a series process of incineration and high temperature melting is recommended. Recommendations for applied research and development necessary to further detail and demonstrate the final waste form, required thermal processes, and melter process equipment are provided

Thermal processing system concepts and considerations for RWMC buried waste

Energy Technology Data Exchange (ETDEWEB)

Eddy, T.L.; Kong, P.C.; Raivo, B.D.; Anderson, G.L.

1992-02-01

This report presents a preliminary determination of ex situ thermal processing system concepts and related processing considerations for application to remediation of transuranic (TRU)-contaminated buried wastes (TRUW) at the Radioactive Waste Management Complex (RWMC) of the Idaho National Engineering Laboratory (INEL). Beginning with top-level thermal treatment concepts and requirements identified in a previous Preliminary Systems Design Study (SDS), a more detailed consideration of the waste materials thermal processing problem is provided. Anticipated waste stream elements and problem characteristics are identified and considered. Final waste form performance criteria, requirements, and options are examined within the context of providing a high-integrity, low-leachability glass/ceramic, final waste form material. Thermal processing conditions required and capability of key systems components (equipment) to provide these material process conditions are considered. Information from closely related companion study reports on melter technology development needs assessment and INEL Iron-Enriched Basalt (IEB) research are considered. Five potentially practicable thermal process system design configuration concepts are defined and compared. A scenario for thermal processing of a mixed waste and soils stream with essentially no complex presorting and using a series process of incineration and high temperature melting is recommended. Recommendations for applied research and development necessary to further detail and demonstrate the final waste form, required thermal processes, and melter process equipment are provided.

46 CFR 175.550 - Special consideration.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Special consideration. 175.550 Section 175.550 Shipping...) GENERAL PROVISIONS § 175.550 Special consideration. In applying the provisions of this subchapter, the OCMI may give special consideration to authorizing departures from the specific requirements when...

[Technological innovations in radiation oncology require specific quality controls].

Science.gov (United States)

Lenaerts, E; Mathot, M

2014-01-01

During the last decade, the field of radiotherapy has benefited from major technological innovations and continuously improving treatment efficacy, comfort and safety of patients. This mainly concerns the imaging techniques that allow 4D CT scan recording the respiratory phases, on-board imaging on linear accelerators that ensure perfect positioning of the patient for treatment and irradiation techniques that reduce very significantly the duration of treatment sessions without compromising quality of the treatment plan, including IMRT (Intensity Modulated Radiation Therapy) and VMAT (Volumetric Modulated Arc therapy). In this context of rapid technological change, it is the responsibility of medical physicists to regularly and precisely monitor the perfect functioning of new techniques to ensure patient safety. This requires the use of specific quality control equipment best suited to these new techniques. We will briefly describe the measurement system Delta4 used to control individualized treatment plan for each patient treated with VMAT technology.

MEGASTAR: The Meaning of Energy Growth: An Assessment of Systems, Technologies, and Requirements

Science.gov (United States)

1974-01-01

A methodology for the display and analysis of postulated energy futures for the United States is presented. A systems approach that includes the methodology of technology assessment is used to examine three energy scenarios--the Westinghouse Nuclear Electric Economy, the Ford Technical Fix Base Case and a MEGASTAR generated Alternate to the Ford Technical Fix Base Case. The three scenarios represent different paths of energy consumption for the present to the year 2000. Associated with these paths are various mixes of fuels, conversion, distribution, conservation and end-use technologies. MEGASTAR presents the estimated times and unit requirements to supply the fuels, conversion and distribution systems for the postulated end uses for the three scenarios and then estimates the aggregate manpower, materials, and capital requirements needed to develop the energy system described by the particular scenario. The total requirements and the energy subsystems for each scenario are assessed for their primary impacts in the areas of society, the environment, technology and the economy.

Emerging technologies for the changing global market

Science.gov (United States)

Cruit, Wendy; Schutzenhofer, Scott; Goldberg, Ben; Everhart, Kurt

1993-01-01

This project served to define an appropriate methodology for effective prioritization of technology efforts required to develop replacement technologies mandated by imposed and forecast legislation. The methodology used is a semi-quantative approach derived from quality function deployment techniques (QFD Matrix). This methodology aims to weight the full environmental, cost, safety, reliability, and programmatic implications of replacement technology development to allow appropriate identification of viable candidates and programmatic alternatives. The results will be implemented as a guideline for consideration for current NASA propulsion systems.

Safeguards and security considerations for automated and robotic systems

Energy Technology Data Exchange (ETDEWEB)

Jordan, S.E.; Jaeger, C.D.

1994-09-01

Within the reconfigured Nuclear Weapons Complex there will be a large number of automated and robotic (A&R) systems because of the many benefits derived from their use. To meet the overall security requirements of a facility, consideration must be given to those systems that handle and process nuclear material. Since automation and robotics is a relatively new technology, not widely applied to the Nuclear Weapons Complex, safeguards and security (S&S) issues related to these systems have not been extensively explored, and no guidance presently exists. The goal of this effort is to help integrate S&S into the design of future A&R systems. Towards this, the authors first examined existing A and R systems from a security perspective to identify areas of concern and possible solutions of these problems. They then were able to develop generalized S&S guidance and design considerations for automation and robotics.

Learning with Technology: Using Discussion Forums to Augment a Traditional-Style Class

Science.gov (United States)

Shana, Zuhrieh

2009-01-01

There is considerable evidence that using technology as an instructional tool improves student learning and educational outcomes (Hanna & de Nooy, 2003). In developing countries, pre-university education focuses on memorization, although meting the mission of AUST requires students to manage technology and to think more independently. This…

Consideration on the interaction between society and nuclear technology

International Nuclear Information System (INIS)

Shinoda, Yoshihiko

2007-01-01

A social conflict over nuclear technology arises from the different interactions between society and nuclear technology. The purpose of this review is to grasp the essential points of this social conflict from a social viewpoint. These essential points can be discerned by interpreting results of polls about nuclear technology and the future of society in general. As a result, attitudes towards nuclear technology can be explained in terms of differences of general views on society such as social order or social progress. The attitudes of people toward nuclear technology were divided into strong agreement, weak agreement, weak objection and strong objection in order to obtain useful information for clarification of social conflict on this issue. Results of polls of people who have weak agreement for nuclear technology reveal their ambivalence about nuclear technology. This raises concern that further implementation of nuclear technology might cause these people to shift their views to objection. (author)

15 CFR 2301.5 - Special consideration.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Special consideration. 2301.5 Section... PROGRAM Application Requirements § 2301.5 Special consideration. In accordance with section 392(f) of the Act, the Agency will give special consideration to applications that foster ownership of, operation of...

46 CFR 169.112 - Special consideration.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Special consideration. 169.112 Section 169.112 Shipping... Provisions § 169.112 Special consideration. In applying the provisions of this part, the Officer in Charge, Marine Inspection, may give special consideration to departures from the specific requirements when...

How to build an antimatter rocket for interstellar missions - systems level considerations in designing advanced propulsion technology vehicles

Science.gov (United States)

Frisbee, Robert H.

2003-01-01

This paper discusses the general mission requirements and system technologies that would be required to implement an antimatter propulsion system where a magnetic nozzle is used to direct charged particles to produce thrust.

Technology transfer considerations for the collider dipole magnet

International Nuclear Information System (INIS)

Goodzeit, C.; Fischer, R.

1991-03-01

The R ampersand D program at the national laboratories has resulted in significant advances in design and fabrication methods for the Collider Dipole Magnets. The status of the transfer of the technology developed by the laboratories is reviewed. The continuation of the technology transfer program is discussed with a description of: (1) the relation of technology transfer activities to collider dipole product development; (2) content of the program relating to key magnet performance issues; and (3) methods to implement the program. 5 refs

Virtual environment and computer-aided technologies used for system prototyping and requirements development

Science.gov (United States)

Logan, Cory; Maida, James; Goldsby, Michael; Clark, Jim; Wu, Liew; Prenger, Henk

1993-01-01

The Space Station Freedom (SSF) Data Management System (DMS) consists of distributed hardware and software which monitor and control the many onboard systems. Virtual environment and off-the-shelf computer technologies can be used at critical points in project development to aid in objectives and requirements development. Geometric models (images) coupled with off-the-shelf hardware and software technologies were used in The Space Station Mockup and Trainer Facility (SSMTF) Crew Operational Assessment Project. Rapid prototyping is shown to be a valuable tool for operational procedure and system hardware and software requirements development. The project objectives, hardware and software technologies used, data gained, current activities, future development and training objectives shall be discussed. The importance of defining prototyping objectives and staying focused while maintaining schedules are discussed along with project pitfalls.

Safeguards and security considerations for automated and robotic systems

International Nuclear Information System (INIS)

Jordan, S.E.; Jaeger, C.D.

1994-01-01

Within the reconfigured Nuclear Weapons Complex there will be a large number of automated and robotic (A ampersand R) systems because of the many benefits derived from their use. To meet the overall security requirements of a facility, consideration must be given to those systems that handle and process nuclear material. Since automation and robotics is a relatively new technology, not widely applied to the Nuclear Weapons Complex, safeguards and security (S ampersand S) issues related to these systems have not been extensively explored, and no guidance presently exists. The goal of this effort is to help integrate S ampersand S into the design of future A ampersand R systems. Towards this, the authors first examined existing A and R systems from a security perspective to identify areas of concern and possible solutions of these problems. They then were able to develop generalized S ampersand S guidance and design considerations for automation and robotics

Safeguards and security considerations for automated and robotic systems

International Nuclear Information System (INIS)

Jordan, S.E.; Jaeger, C.D.

1994-01-01

Within the reconfigured Nuclear Weapons Complex there will be a large number of automated and robotic (A ampersand R) systems because of the many benefits derived from their use. To meet the overall security requirements of a facility, consideration must be given to those systems that handle and process nuclear material. Since automation and robotics is a relatively new technology, not widely applied to the Nuclear Weapons Complex, safeguards and security (S ampersand S) issues related to these systems have not been extensively explored, and no guidance presently exists. The goal of this effort is to help integrate S ampersand S into the design of future A ampersand R systems. Towards this, we first examined existing A ampersand R systems from a security perspective to identify areas of concern and possible solutions to these problems. We then were able to develop generalized S ampersand S guidance and design considerations for automation and robotics

Megavoltage radiation therapy: Meeting the technological needs

International Nuclear Information System (INIS)

Van Dyk, J.

2002-01-01

addressing technological needs for megavoltage radiation treatment, that the radiation treatment machine technology not be considered in isolation from the technologies associated with the other steps of the treatment process. It makes no sense to have highly sophisticated linear accelerators capable of 3-D conformal and intensity modulated radiation therapy (IMRT) if there is not a good imaging capability for accurately defining the extent and location of both tumours and normal tissues. Requirements for a radiation therapy facility have been defined in an IAEA report. This report considered cobalt-60 megavoltage therapy machines but indicated that the IAEA would not consider provisions for linear accelerators. In 1993, the Pan American Health Organization along with the WHO and the IAEA produced a report describing the design requirements for megavoltage x-ray machines for cancer treatment in developing countries. Clearly, even within the last decade, there are still different opinions on the benefits (and risks) of cobalt-60 versus linear accelerators for provision of radiation treatment especially in the context of developing countries. There are a number of considerations when a particular institution in any country makes decisions about the purchase of radiation therapy equipment. Broadly speaking, these include: Societal infrastructure considerations (e.g. is there stable electrical power available to support the treatment and related technologies?); Financial considerations (e.g. are there sufficient financial resources to purchase, operate, maintain and eventually dispose of the treatment technology?); Types and stage of diseases most likely to be treated (e.g. late stage diseases have different planning and treatment requirements compared to early stage and well localized tumours); The number and types of professional staff available to support the treatment technologies (e.g. radiation oncologists, medical physicists, radiation therapists (technologists), and

Post LANDSAT D Advanced Concept Evaluation (PLACE). [with emphasis on mission planning, technological forecasting, and user requirements

Science.gov (United States)

1977-01-01

An outline is given of the mission objectives and requirements, system elements, system concepts, technology requirements and forecasting, and priority analysis for LANDSAT D. User requirements and mission analysis and technological forecasting are emphasized. Mission areas considered include agriculture, range management, forestry, geology, land use, water resources, environmental quality, and disaster assessment.

Human factors considerations for the use of color in display systems

Science.gov (United States)

Demars, S. A.

1975-01-01

Identified and assessed are those human factor considerations impacting an operator's ability to perform when information is displayed in color as contrasted to monochrome (black and white only). The findings provide valuable guidelines for the assessment of the advantages (and disadvantages) of using a color display system. The use of color provides an additional sensory channel (color perception) which is not available with black and white. The degree to which one can exploit the use of this channel is highly dependent on available display technology, mission information display requirements, and acceptable operational modes.

34 CFR 400.9 - What additional requirements govern the Vocational and Applied Technology Education Programs?

Science.gov (United States)

2010-07-01

... Applied Technology Education Programs? 400.9 Section 400.9 Education Regulations of the Offices of the... VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION PROGRAMS-GENERAL PROVISIONS § 400.9 What additional requirements govern the Vocational and Applied Technology Education Programs? In addition to the Act, applicable...

Hybrid Electric Vehicles: Some Theoretical Considerations on Consumption Behaviour

Directory of Open Access Journals (Sweden)

Fabio Carlucci

2018-04-01

Full Text Available Solving the problem of the lack of environmental sustainability in transport activities requires the involvement of new technologies, particularly in populated cities where mobility activities play a major role in generating externalities. The move from cars powered by conventional internal combustion engines to cars powered by alternative energies can make an important contribution to reducing emissions and achieving a more sustainable transport system. Unfortunately, green car market development still remains uncertain because of the higher production costs of batteries and engines. In this context, surprisingly little attention has been devoted to analysing the economic factors affecting consumers’ behaviour in the choice of hybrid electric vehicles. To fill this gap, the diffusion process of hybrid technology as well as intrinsic and extrinsic motivations and the crowding-out effect on consumers’ purchasing decisions are taken under consideration. Finally, some policy recommendations are provided.

Technical requirement of experiments and facilities for fusion nuclear technology

International Nuclear Information System (INIS)

Abdou, M.; Tillak, M.; Gierszwski, P.; Grover, J.; Puigh, R.; Sze, D.K.; Berwald, D.

1986-06-01

The technical issues and requirements of experiments and facilities for fusion nuclear technology (FNT) have been investigated. The nuclear subsystems addressed are: a) blanket, b) radiation shield, c) tritium processing system, and d) plasma interactive components. Emphasis has been placed on the important and complex development problems of the blanket. A technical planning process for FNT has been developed and applied, including four major elements: 1) characterization of issues, 2) quantification of testing requirements, 3) evaluation of facilities, and 4) development of a test plan to identify the role, timing, characteristics and costs of major experiments and facilities

Some general requirements for irradiation experiments

Energy Technology Data Exchange (ETDEWEB)

Myers, H P; Skjoeldebrand, R

1960-05-15

This paper is limited to the interests of the EAES-symposium, namely the use of reactors for materials research and testing, for convenience we exclude consideration of chemical effects and problems of coolant technology. Its purpose is to try to define the general requirements for irradiation experiments and the reactors housing them; to see what facilities for irradiation experiments are available within the European Atomic Energy Society countries and finally, to point out possible limitations of these facilities.

Definition of common support equipment and space station interface requirements for IOC model technology experiments

Science.gov (United States)

Russell, Richard A.; Waiss, Richard D.

1988-01-01

A study was conducted to identify the common support equipment and Space Station interface requirements for the IOC (initial operating capabilities) model technology experiments. In particular, each principal investigator for the proposed model technology experiment was contacted and visited for technical understanding and support for the generation of the detailed technical backup data required for completion of this study. Based on the data generated, a strong case can be made for a dedicated technology experiment command and control work station consisting of a command keyboard, cathode ray tube, data processing and storage, and an alert/annunciator panel located in the pressurized laboratory.

How Technology Teachers Understand Technological Knowledge

Science.gov (United States)

Norström, Per

2014-01-01

Swedish technology teachers' views of technological knowledge are examined through a written survey and a series of interviews. The study indicates that technology teachers' understandings of what constitutes technological knowledge and how it is justified vary considerably. The philosophical discussions on the topic are unknown to them. This lack…

Reusable Orbit Transfer Vehicle Propulsion Technology Considerations

National Research Council Canada - National Science Library

Perkins, Dave

1998-01-01

.... ROTV propulsion technologies to consider chemical rockets have limited mission capture, solar thermal rockets capture most missions but LH2 issues, and electric has highest PL without volume constraint...

Access to augmentative and alternative communication: new technologies and clinical decision-making.

Science.gov (United States)

Fager, Susan; Bardach, Lisa; Russell, Susanne; Higginbotham, Jeff

2012-01-01

Children with severe physical impairments require a variety of access options to augmentative and alternative communication (AAC) and computer technology. Access technologies have continued to develop, allowing children with severe motor control impairments greater independence and access to communication. This article will highlight new advances in access technology, including eye and head tracking, scanning, and access to mainstream technology, as well as discuss future advances. Considerations for clinical decision-making and implementation of these technologies will be presented along with case illustrations.

Commercially-driven human interplanetary propulsion systems: Rationale, concept, technology, and performance requirements

International Nuclear Information System (INIS)

Williams, C.H.; Borowski, S.K.

1996-01-01

Previous studies of human interplanetary missions are largely characterized by long trip times, limited performance capabilities, and enormous costs. Until these missions become dramatically more open-quote open-quote commercial-friendly close-quote close-quote, their funding source and rationale will be restricted to national governments and their political/scientific interests respectively. A rationale is discussed for human interplanetary space exploration predicated on the private sector. Space propulsion system requirements are identified for interplanetary transfer times of no more than a few weeks/months to and between the major outer planets. Nuclear fusion is identified as the minimum requisite space propulsion technology. A conceptual design is described and evolutionary catalyzed-DD to DHe 3 fuel cycles are proposed. Magnetic nozzles for direct thrust generation and quantifying the operational aspects of the energy exchange mechanisms between high energy reaction products and neutral propellants are identified as two of the many key supporting technologies essential to satisfying system performance requirements. Government support of focused, breakthrough technologies is recommended at funding levels appropriate to other ongoing federal research. copyright 1996 American Institute of Physics

Nuclear energy technology transfer: the security barriers

International Nuclear Information System (INIS)

Rinne, R.L.

1975-08-01

The problems presented by security considerations to the transfer of nuclear energy technology are examined. In the case of fusion, the national security barrier associated with the laser and E-beam approaches is discussed; for fission, the international security requirements, due to the possibility of the theft or diversion of special nuclear materials or sabotage of nuclear facilities, are highlighted. The paper outlines the nuclear fuel cycle and terrorist threat, examples of security barriers, and the current approaches to transferring technology. (auth)

Framework for the quality assurance of 'omics technologies considering GLP requirements.

Science.gov (United States)

Kauffmann, Hans-Martin; Kamp, Hennicke; Fuchs, Regine; Chorley, Brian N; Deferme, Lize; Ebbels, Timothy; Hackermüller, Jörg; Perdichizzi, Stefania; Poole, Alan; Sauer, Ursula G; Tollefsen, Knut E; Tralau, Tewes; Yauk, Carole; van Ravenzwaay, Ben

2017-12-01

'Omics technologies are gaining importance to support regulatory toxicity studies. Prerequisites for performing 'omics studies considering GLP principles were discussed at the European Centre for Ecotoxicology and Toxicology of Chemicals (ECETOC) Workshop Applying 'omics technologies in Chemical Risk Assessment. A GLP environment comprises a standard operating procedure system, proper pre-planning and documentation, and inspections of independent quality assurance staff. To prevent uncontrolled data changes, the raw data obtained in the respective 'omics data recording systems have to be specifically defined. Further requirements include transparent and reproducible data processing steps, and safe data storage and archiving procedures. The software for data recording and processing should be validated, and data changes should be traceable or disabled. GLP-compliant quality assurance of 'omics technologies appears feasible for many GLP requirements. However, challenges include (i) defining, storing, and archiving the raw data; (ii) transparent descriptions of data processing steps; (iii) software validation; and (iv) ensuring complete reproducibility of final results with respect to raw data. Nevertheless, 'omics studies can be supported by quality measures (e.g., GLP principles) to ensure quality control, reproducibility and traceability of experiments. This enables regulators to use 'omics data in a fit-for-purpose context, which enhances their applicability for risk assessment. Copyright © 2017 Elsevier Inc. All rights reserved.

Recent technology on steam turbine performance improvement

International Nuclear Information System (INIS)

Hirada, M.; Watanabe, E.; Tashiro, H.

1991-01-01

Continuous efforts have been made to improve turbine efficiency by applying the latest aerodynamic technologies to meet the energy saving requirement. In recent years, there has been considerable improvement in the field of computational fluid dynamics and these new technologies have been applied to the new blade design for HP, IP and LP turbines. Experimental verification for the new blade in turbine tests has established the overall turbine performance improvement and the excellent correspondence of flow pattern to the predicted value. This paper introduces the latest design technologies for the newly developed high efficiency blade and the verification test results

47 CFR 15.120 - Program blocking technology requirements for television receivers.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Program blocking technology requirements for television receivers. 15.120 Section 15.120 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL RADIO... transmitted pursuant to industry standard EIA/CEA-766-A “U.S. and Canadian Region Rating Tables (RRT) and...

Requiring students to have computers: questions for consideration.

Science.gov (United States)

McAuley, R J

1998-06-01

For the past several years a dialogue has been taking place in the offices, lounges, and meeting rooms of medical schools about whether medical students should be required to bring or purchase computers when they enter school. Microcomputers offer educators a unique opportunity to provide students with access to computer-assisted instruction, asynchronous communication, and extensive knowledge bases. However, there is still no evidence attesting to the effectiveness of computers as teaching or learning tools in medical education. The author raises questions that schools need to consider before requiring students to own computers: What kind of computer best suits their needs? What might impede using computers to teach? And who is currently requiring computers? In addressing the last question, the author presents information about 15 North American schools that currently require their students to have computers, reporting each school's software and hardware requirements; how each expects students to use the computers; and who covers the cost of the computers (the students or the school). Finally, he argues that major institutional commitment is needed for computers to be successfully integrated into any medical school curriculum.

Considerations on the Application of the IAEA Safety Requirements for the Design of Nuclear Power Plants

International Nuclear Information System (INIS)

2016-05-01

Revised to take into consideration findings from the Fukushima Daiichi nuclear power plant accident, IAEA Safety Standards Series No. SSR-2/1 (Rev. 1), Safety of Nuclear Power Plants: Design, has introduced some new concepts with respect to the earlier safety standard published in the year 2000. The preparation of SSR-2/1 (Rev. 1) was carried out with constant and intense involvement of IAEA Member States, but some new requirements, because of the novelty of the concepts introduced and the complexity of the issues, are not always interpreted in a unique way. The IAEA is confident that a complete clarification and a full understanding of the new requirements will be available when the supporting safety guides for design and safety assessment of nuclear power plants are prepared. The IAEA expects that the effort devoted to the preparation of this publication, which received input and comments from several Member States and experts, will also facilitate and harmonize the preparation or revision of these supporting standards

Supporting robotics technology requirements through research in intelligent machines

Energy Technology Data Exchange (ETDEWEB)

Mann, R.C.

1995-02-01

{open_quotes}Safer, better, cheaper{close_quotes} are recurring themes in many robot development efforts. Significant improvements are being accomplished with existing technology, but basic research sets the foundations for future improvements and breakthrough discoveries. Advanced robots represent systems that integrate the three basic functions of sensing, reasoning, and acting (locomotion and manipulation) into one functional unit. Depending on the application requirements, some of these functions are implemented at a more or less advanced level than others. For example, some navigation tasks can be accomplished with purely reactive control and do not require sophisticated reasoning and planning methodologies. Robotics work at the Oak Ridge National Laboratory (ORNL) spans the spectrum from basic research to application-specific development and rapid prototyping of systems. This presentation summarizes recent highlights of the robotics research activities at ORNL.

Employers' Perceptions of Information Technology Competency Requirements for Management Accounting Graduates

Science.gov (United States)

Spraakman, Gary; O'Grady, Winifred; Askarany, Davood; Akroyd, Chris

2015-01-01

Management accountants work in a computerized workplace with information technology (IT) for producing financial ledgers and for reporting. Thus, the role of the management accountant has shifted from capturing and recording transactions to analyzing business issues. The research question is: what IT knowledge and skills do employers require of…

Advanced maternal age: ethical and medical considerations for assisted reproductive technology

Directory of Open Access Journals (Sweden)

Harrison BJ

2017-08-01

Full Text Available Brittany J Harrison,1 Tara N Hilton,1 Raphaël N Rivière,1 Zachary M Ferraro,1–3 Raywat Deonandan,4 Mark C Walker1–3,51Faculty of Medicine, University of Ottawa, Ottawa, ON, Canada; 2Division of Maternal-Fetal Medicine, University of Ottawa, The Ottawa Hospital, Ottawa, ON, Canada; 3Ottawa Hospital Research Institute, The Ottawa Hospital, Ottawa, ON, Canada; 4University of Ottawa Interdisciplinary School of Health Sciences, Ottawa, ON, Canada; 5Department of Obstetrics, Gynecology and Newborn Care, The Ottawa Hospital, Ottawa, ON, CanadaObjectives: This review explores the ethical and medical challenges faced by women of advanced maternal age who decide to have children. Assisted reproductive technologies (ARTs make post-menopausal pregnancy physiologically plausible, however, one must consider the associated physical, psychological, and sociological factors involved.Methods: A quasi-systematic review was conducted in PubMed and Ovid using the key terms post-menopause, pregnancy + MeSH terms [donations, hormone replacement therapy, assisted reproductive technologies, embryo donation, donor artificial insemination, cryopreservation]. Overall, 28 papers encompassing two major themes (ethical and medical were included in the review.Conclusion: There are significant ethical considerations and medical (maternal and fetal complications related to pregnancy in peri- and post-menopausal women. When examining the ethical and sociological perspective, the literature portrays an overall positive attitude toward pregnancy in advanced maternal age. With respect to the medical complications, the general consensus in the evaluated studies suggests that there is greater risk of complication for spontaneous pregnancy when the mother is older (eg, >35 years old. This risk can be mitigated by careful medical screening of the mother and the use of ARTs in healthy women. In these instances, a woman of advanced maternal age who is otherwise healthy can carry a

Argonne-West facility requirements for a radioactive waste treatment demonstration

International Nuclear Information System (INIS)

Dwight, C.C.; Felicione, F.S.; Black, D.B.; Kelso, R.B.; McClellan, G.C.

1995-01-01

At Argonne National Laboratory-West (ANL-W), near Idaho Falls, Idaho, facilities that were originally constructed to support the development of liquid-metal reactor technology are being used and/or modified to meet the environmental and waste management research needs of DOE. One example is the use of an Argonne-West facility to conduct a radioactive waste treatment demonstration through a cooperative project with Science Applications International Corporation (SAIC) and Lockheed Idaho Technologies Company. The Plasma Hearth Process (PBP) project will utilize commercially-adapted plasma arc technology to demonstrate treatment of actual mixed waste. The demonstration on radioactive waste will be conducted at Argonne's Transient Reactor Test Facility (TREAT). Utilization of an existing facility for a new and different application presents a unique set of issues in meeting applicable federal state, and local requirements as well as the additional constraints imposed by DOE Orders and ANL-W site requirements. This paper briefly describes the PHP radioactive demonstrations relevant to the interfaces with the TREAT facility. Safety, environmental design, and operational considerations pertinent to the PHP radioactive demonstration are specifically addressed herein. The personnel equipment, and facility interfaces associated with a radioactive waste treatment demonstration are an important aspect of the demonstration effort. Areas requiring significant effort in preparation for the PBP Project being conducted at the TREAT facility include confinement design, waste handling features, and sampling and analysis considerations. Information about the facility in which a radioactive demonstration will be conducted, specifically Argonne's TREAT facility in the case of PHP, may be of interest to other organizations involved in developing and demonstrating technologies for mixed waste treatment

7 CFR 1735.92 - Accounting considerations.

Science.gov (United States)

2010-01-01

... 7 Agriculture 11 2010-01-01 2010-01-01 false Accounting considerations. 1735.92 Section 1735.92... All Acquisitions and Mergers § 1735.92 Accounting considerations. (a) Proper accounting shall be... in the absence of such a commission, as required by RUS based on Generally Accepted Accounting...

University Technology Transfer

Directory of Open Access Journals (Sweden)

Mike Cox

2004-09-01

Full Text Available This article describes the experiences and general observations of the author at Heriot-Watt University and concerns the transfer of university technology for the purposes of commercialisation. Full commercial exploitation of a university invention generally requires transferring that technology into the industrial arena, usually either by formation of a new company or licensing into an existing company. Commercialisation activities need to be carried out in unison with the prime activities of the university of research and teaching. Responsibility for commercialising university inventions generally rests with a specific group within the university, typically referred to as the technology transfer group. Each technology transfer should be considered individually and appropriate arrangements made for that particular invention. In general, this transfer process involves four stages: identification, evaluation, protection and exploitation. Considerations under these general headings are outlined from a university viewpoint. A phased approach is generally preferred where possible for the evaluation, protection and exploitation of an invention to balance risk with potential reward. Evaluation of the potential opportunity for a university invention involves essentially the same considerations as for an industrial invention. However, there are a range of commercial exploitation routes and potential deals so that only general guidelines can be given. Naturally, the final deal achieved is that which can be negotiated. The potential rewards for the university and inventor are both financial (via licensing income and equity realisation and non-financial.

E-Learning Systems Requirements Elicitation: Perspectives and Considerations

Science.gov (United States)

AlKhuder, Shaikha B.; AlAli, Fatma H.

2017-01-01

Training and education have evolved far beyond black boards and chalk boxes. The environment of knowledge exchange requires more than simple materials and assessments. This article is an attempt of parsing through the different aspects of e-learning, understanding the real needs, and conducting the right requirements to build the appropriate…

Cyber Security Considerations for Autonomous Tactical Wheeled Vehicles

Science.gov (United States)

2016-04-01

Update Will Enable Autonomous Driving. Retrieved August 6, 2015, from http://spectrum.ieee.org/: http://spectrum.ieee.org/ cars -that-think...Cyber Security Considerations for Autonomous Tactical Wheeled Vehicles 1 UNCLASSIFIED Cyber Security Considerations for... Autonomous Tactical Wheeled Vehicles Sebastian C Iovannitti 4/1/2016 Submitted to Lawrence Technological University College of Management in

The effects on grid matching and ramping requirements, of single and distributed PV systems employing various fixed and sun-tracking technologies

International Nuclear Information System (INIS)

Solomon, A.A.; Faiman, D.; Meron, G.

2010-01-01

In this second paper, which studies the hourly generation data from the Israel Electric Corporation for the year 2006, with a view to adding very large-scale photovoltaic power (VLS-PV) plants, three major extensions are made to the results reported in our first paper. In the first extension, PV system simulations are extended to include the cases of 1- and 2-axis sun-tracking, and 2-axis concentrator photovoltaic (CPV) technologies. Secondly, the effect of distributing VLS-PV plants among 8 Negev locations, for which hourly metrological data exist, is studied. Thirdly, in addition to studying the effect of VLS-PV on grid penetration, the present paper studies its effect on grid ramping requirements. The principal results are as follows: (i) sun-tracking improves grid matching at high but not low levels of grid flexibility; (ii) geographical distribution has little effect on grid penetration; (iii) VLS-PV significantly increases grid ramping requirements, particularly for CPV systems, but not beyond existing ramping capabilities; (iv) geographical distribution considerably ameliorates this effect.

The Impact of Training on the Time Required to Implement Technology in the Classroom

Science.gov (United States)

Stevens, Troy

2014-01-01

Many teachers are using technology to improve student achievement, but only a few are attaining an improvement in student achievement. The purpose of this quantitative study was to identify: (1) how much time teachers spend integrating technology into their classroom, (2) how much time teachers believe is required to maximize the effectiveness of…

Criteria Considerations for Establishment of Hems Operations

Directory of Open Access Journals (Sweden)

Borivoj Galović

2007-05-01

Full Text Available The importance of the "golden hour"; for optimal efficiencyof helicopter operations in emergency medical service (HEMSto meet the "golden hour" requirement the unconditional requirementis to establish a net of operational units to cover theentire area of the Republic of Croatia, capable to operate withinwide integrated area (international services. It is additionalback-up, not a competition to road and sea EMS vehicles. Therequired standards; HEMS operation, following complementarytraffic policy, i. e. complementary policy in line of trafficsystem integration within wider region, with reference to standards,must entirely comply with globally accepted standards.Republic of Croatia 's obvious objectives are traffic integrationinto EU (European Union traffic system. Cost analyses; It isstressed that coherent traffic policy can by certain instrumentsreduce traffic assigned external cost in national budget. Significanttraffic external cost includes cost of traffic accidents, environmentimpacts and traffic jams, and could be reduced byestablishmentof multi-purpose helicopter operations. SWOTanalyses should be made as for any other strategy or project.Technical-technological criteria and other considerations;Considering technical-technological criteria for relief of criticalsituations in traffic, it is obvious that one helicopter type cannotcomply to all multi-purpose requirements that traffic sets beforeus - EMS on open roads, sea, mountains and urban trafficcongested area, and search and rescue operations. However,common factor for all types is compliance to global standardsand regulations. In the paper, some examples of HEMS operationsin the EU States are mentioned.

Considerations in the development of subsurface containment barrier performance standards

International Nuclear Information System (INIS)

Dunstan, S.; Zdinak, A.P.; Lodman, D.

1997-01-01

The U.S. Department of Energy (DOE) is supporting subsurface barriers as an alternative remedial option for management of contamination problems at their facilities. Past cleanup initiatives have sometimes proven ineffective or extremely expensive. Economic considerations coupled with changing public and regulatory philosophies regarding remediation techniques makes subsurface barriers a promising technology for future cleanup efforts. As part of the initiative to develop subsurface containment barriers as an alternative remedial option, DOE funded MSE Technology Applications, Inc. (MSE) to conduct a comprehensive review to identify performance considerations for the acceptability of subsurface barrier technologies as a containment method. Findings from this evaluation were intended to provide a basis for selection and application of containment technologies to address waste problems at DOE sites. Based on this study, the development of performance standards should consider: (1) sustainable low hydraulic conductivity; (2) capability to meet applicable regulations; (3) compatibility with subsurface environmental conditions; (4) durability and long-term stability; (5) repairability; and (6) verification and monitoring. This paper describes the approach for determining considerations for performance standards

Clinical photography in dermatology: ethical and medico-legal considerations in the age of digital and smartphone technology.

Science.gov (United States)

Kunde, Lauren; McMeniman, Erin; Parker, Malcolm

2013-08-01

Clinical photography has long been an important aspect in the management of dermatological pathology and has many applications in contemporary dermatology practice. With the continuous evolution of digital and smartphone technology, clinicians must maintain ethical and medico-legal standards. This article reviews how dermatology trainees are utilising this technology in their clinical practice and what procedures they follow when taking photos of patients. We review the ethical and legal considerations of clinical photography in dermatology and present a hypothetical medico-legal scenario. Dermatology registrars were surveyed on their use of personal smartphones and digital equipment for photographing patients in their clinical practice. Numerous medico-legal providers were approached to provide medico-legal advice about a hypothetical scenario. We found that the use of these technologies is prevalent among dermatology registrars and all respondents reported regular use. Clinicians should routinely obtain and document adequate patient consent in relation to clinical photography, utilise strict privacy settings on smartphones and other digital devices and ensure that the images are stored on these devices for minimal periods. Express consent documentation in the clinical file puts the clinician in a more defensible position if a complaint is made to the medical board or privacy commissioner. © 2013 The Authors. Australasian Journal of Dermatology © 2013 The Australasian College of Dermatologists.

Requirements Flowdown for Prognostics and Health Management

Science.gov (United States)

Goebel, Kai; Saxena, Abhinav; Roychoudhury, Indranil; Celaya, Jose R.; Saha, Bhaskar; Saha, Sankalita

2012-01-01

Prognostics and Health Management (PHM) principles have considerable promise to change the game of lifecycle cost of engineering systems at high safety levels by providing a reliable estimate of future system states. This estimate is a key for planning and decision making in an operational setting. While technology solutions have made considerable advances, the tie-in into the systems engineering process is lagging behind, which delays fielding of PHM-enabled systems. The derivation of specifications from high level requirements for algorithm performance to ensure quality predictions is not well developed. From an engineering perspective some key parameters driving the requirements for prognostics performance include: (1) maximum allowable Probability of Failure (PoF) of the prognostic system to bound the risk of losing an asset, (2) tolerable limits on proactive maintenance to minimize missed opportunity of asset usage, (3) lead time to specify the amount of advanced warning needed for actionable decisions, and (4) required confidence to specify when prognosis is sufficiently good to be used. This paper takes a systems engineering view towards the requirements specification process and presents a method for the flowdown process. A case study based on an electric Unmanned Aerial Vehicle (e-UAV) scenario demonstrates how top level requirements for performance, cost, and safety flow down to the health management level and specify quantitative requirements for prognostic algorithm performance.

US Export Controls and Technology Transfer Requirements: A UK Perspective

Science.gov (United States)

2010-05-01

34 (La Franchi , 2006). Such requirements make it difficult for partners to participate and generate a large administrative burden on team members, who...if this critical impediment to enhanced cooperation is to be removed. The U.S. export control system is broken; its technology transfer rules ...Retrieved April 3, 2009, from http://www.jsf.mil/news/news2009.htm La Franchi , P. (2006, July 4). Australia demands JSF resolution. Flight International

An Effective Method For Nuclear Technology Transfer

International Nuclear Information System (INIS)

Jeon, Jan Pung

1987-01-01

Three basic entities involved in the implementation of nuclear projects are the Owner, Regulatory Authority and Nuclear Industry. Their ultimate objective is to secure the safe, reliable and economical nuclear energy. For s successful nuclear power program, the owner should maintain a good relationship with the other entities and pursue an optimization of the objectives. On the other hand, he should manage projects along the well - planned paths in order to effectively learn the nuclear technology. One of the problems in the nuclear projects of developing countries was the absence of long - term technology development program, a limited local participation and the technical incapability. For the effective technology transfer, a motivation of the technology supplier and a readiness of the recipient to accommodate such technologies are required. Advanced technology is usually developed at considerable expense with the expectation that the developer will use it in furthering his own business. Therefore, he tends to be reluctant to transfer it to the others, particularly, to the potential competitors. There is a disinclination against further technology transfer beyond the minimum contractual obligation or the requirements by Government Regulatory. So, an additional commercial incentive must be provided to the developer

International Nuclear Management Academy Requirements for University Master’s Programmes in Nuclear Technology Management

International Nuclear Information System (INIS)

Grosbois, J. de; Hirose, H.; Adachi, F.; Liu, L.; Hanamitsu, K.; Kosilov, A.; Roberts, J.

2016-01-01

Full text: The development of any national nuclear energy programme is dependent on the successful development of qualified human resources, through a sustainable nuclear education and training programmes supported by government and industry. Among the broad range of specialists needed for the continued safe and economic utilization of nuclear technology for peaceful purposes, are a most vital component—managers. The International Nuclear Management Academy (INMA) is an IAEA facilitated collaboration framework in which universities provide master’s degree programmes focusing on the management aspect for the nuclear sector. INMA master’s programmes in Nuclear Technology Management (NTM) specify a common set of competency requirements that graduates should acquire to prepare them to become competent managers. This paper presents an overview of the INMA collaboration framework and the requirements for partner universities to implement master’s programmes in Nuclear Technology Management. (author

Budgeting and Funding School Technology: Essential Considerations

Science.gov (United States)

Ireh, Maduakolam

2010-01-01

School districts need adequate financial resources to purchase hardware and software, wire their buildings to network computers and other information and communication devices, and connect to the Internet to provide students, teachers, and other school personnel with adequate access to technology. Computers and other peripherals, particularly,…

Conceptual definition of a technology development mission for advanced solar dynamic power systems

Science.gov (United States)

Migra, R. P.

1986-01-01

An initial conceptual definition of a technology development mission for advanced solar dynamic power systems is provided, utilizing a space station to provide a dedicated test facility. The advanced power systems considered included Brayton, Stirling, and liquid metal Rankine systems operating in the temperature range of 1040 to 1400 K. The critical technologies for advanced systems were identified by reviewing the current state of the art of solar dynamic power systems. The experimental requirements were determined by planning a system test of a 20 kWe solar dynamic power system on the space station test facility. These requirements were documented via the Mission Requirements Working Group (MRWG) and Technology Development Advocacy Group (TDAG) forms. Various concepts or considerations of advanced concepts are discussed. A preliminary evolutionary plan for this technology development mission was prepared.

Human perception considerations for 3D content creation

Science.gov (United States)

Green, G. Almont

2011-03-01

Observation and interviews with people viewing autostereoscopic 3D imagery provides evidence that there are many human perception considerations required for 3D content creation. A study was undertaken whereby it was witnessed that certain test autostereoscopic imagery elicited a highly emotional response and engagement, while other test autostereoscopic imagery was given only a passing glance. That an image can be viewed with a certain level of stereopsis does not make it compelling. By taking into consideration the manner in which humans perceive depth and the space between objects, 3D content can achieve a level of familiarity and realness that is not possible with single perspective imagery. When human perception issues are ignored, 3D imagery can be undesirable to viewers and a negative bias against 3D imagery can occur. The preparation of 3D content is more important than the display technology. Where human perception, as it is used to interpret reality, is not mimicked in the creation of 3D content, the general public typically express a negative bias against that imagery (where choices are provided). For some, the viewing of 3D content that could not exist naturally, induces physical discomfort.

Innovative Technologies for Human Exploration: Opportunities for Partnerships and Leveraging Novel Technologies External to NASA

Science.gov (United States)

Hay, Jason; Mullins, Carie; Graham, Rachael; Williams-Byrd, Julie; Reeves, John D.

2011-01-01

Human spaceflight organizations have ambitious goals for expanding human presence throughout the solar system. To meet these goals, spaceflight organizations have to overcome complex technical challenges for human missions to Mars, Near Earth Asteroids, and other distant celestial bodies. Resolving these challenges requires considerable resources and technological innovations, such as advancements in human health and countermeasures for space environments; self-sustaining habitats; advanced power and propulsion systems; and information technologies. Today, government space agencies seek cooperative endeavors to reduce cost burdens, improve human exploration capabilities, and foster knowledge sharing among human spaceflight organizations. This paper looks at potential opportunities for partnerships and spin-ins from economic sectors outside the space industry. It highlights innovative technologies and breakthrough concepts that could have significant impacts on space exploration and identifies organizations throughout the broader economy that specialize in these technologies.

Practical considerations for effective microendoscopy

Science.gov (United States)

Papaioannou, Thanassis; Papazoglou, Theodore G.; Daykhovsky, Leon; Gershman, Alex; Segalowitz, Jacob; Reznik, G.; Beeder, Clain; Chandra, Mudjianto; Grundfest, Warren S.

1991-07-01

This paper reports on the application of angioscopic technology to the endoscopy of previously inaccessible body cavities. Necessary instruments including endoscopes, light sources, cameras, video recorders, monitors, and other accessories are described. Practical considerations for effective instrumentation are discussed. An overview of our clinical microendoscopic applications in more than 630 patients is presented.

40 CFR 122.49 - Considerations under Federal law.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 21 2010-07-01 2010-07-01 false Considerations under Federal law. 122... Conditions § 122.49 Considerations under Federal law. The following is a list of Federal laws that may apply... must be followed. When the applicable law requires consideration or adoption of particular permit...

HD Photo: a new image coding technology for digital photography

Science.gov (United States)

Srinivasan, Sridhar; Tu, Chengjie; Regunathan, Shankar L.; Sullivan, Gary J.

2007-09-01

This paper introduces the HD Photo coding technology developed by Microsoft Corporation. The storage format for this technology is now under consideration in the ITU-T/ISO/IEC JPEG committee as a candidate for standardization under the name JPEG XR. The technology was developed to address end-to-end digital imaging application requirements, particularly including the needs of digital photography. HD Photo includes features such as good compression capability, high dynamic range support, high image quality capability, lossless coding support, full-format 4:4:4 color sampling, simple thumbnail extraction, embedded bitstream scalability of resolution and fidelity, and degradation-free compressed domain support of key manipulations such as cropping, flipping and rotation. HD Photo has been designed to optimize image quality and compression efficiency while also enabling low-complexity encoding and decoding implementations. To ensure low complexity for implementations, the design features have been incorporated in a way that not only minimizes the computational requirements of the individual components (including consideration of such aspects as memory footprint, cache effects, and parallelization opportunities) but results in a self-consistent design that maximizes the commonality of functional processing components.

Considerations for Realizing the Promise of Educational Gaming Technology

Science.gov (United States)

Nelson, Nancy J.; Fien, Hank; Doabler, Christian T.; Clarke, Ben

2016-01-01

Hope Elementary School recently purchased tablets for all of its students to facilitate the use of technology in the classroom. The principal at Hope Elementary understands that technology can be an efficient and effective way for teachers to access materials and differentiate instruction to support the achievement of all learners. However, some…

Mining and sustainable development: Considerations for minerals supply

International Nuclear Information System (INIS)

Lambert, Ian B.

2001-01-01

Sustainable development involves meeting the needs of human societies while maintaining viable biological and physical Earth systems. The needs include minerals: metals, fuels, industrial and construction materials. There will continue to be considerable demand for virgin mineral resources, even if levels of recycling and efficiency of use are optimal, and rates of population growth and globalisation decrease significantly. This article aims to stimulate debate on strategic issues for minerals supply. While the world has considerable stocks of mineral resources overall, international considerations of the environmental and social aspects of sustainable development are beginning to result in limitations on where mining will be conducted and what types of deposits will be mined. Current and emerging trends favour large mines in parts of the world where mining can be conducted within acceptable limits of environmental and social impact. Finding new deposits that meet such criteria will be all the more challenging given a disturbing global decline in the rate of discovery of major economic resources over the last decade, and the decreasing land area available for exploration and mining. To attract responsible exploration and mining, governments and mining nations will need to provide: regional-scale geo-scientific datasets as required to attract and guide future generations of exploration; resource access through multiple and sequential land use regimes, and frameworks for dealing with indigenous peoples' issues; and arrangements for consideration of mining proposals and regulation of mines that ensure responsible management of environmental and social issues. The minerals industry will need to continue to pursue advances in technologies for exploration, mining, processing, waste management and rehabilitation, and in public reporting of environmental and social performance. (author)

Some consideration development of account signature of teaching-learning process in technology accounting career in superior level

Directory of Open Access Journals (Sweden)

Alcides Diógenes Gómez-Yépez

2016-10-01

Full Text Available The vocational training of the technologist in accounting and auditing at the Bolivarian Graduate Institute (ITB intends to train competent professionals to solve the problems of the profession, considering its content a set only of high quality, transparent and comparable financial statements and other financial reports to help participants from different regions of the world capital markets. Such details require an improvement in the process of teaching-learning. The authors offer a critical perspective its considerations contextualized in the ITB.

Technology Requirements and Development for Affordable High-Temperature Distributed Engine Controls

Science.gov (United States)

2012-06-04

long lasting, high temperature modules is to use high temperature electronics on ceramic modules. The electronic components are “ brazed ” onto the...Copyright © 2012 by ISA Technology Requirements and Development for Affordable High - Temperature Distributed Engine Controls Alireza Behbahani 1...with regards to high temperature capability. The Government and Industry Distributed Engine Controls Working Group (DECWG) [5] has been established

Comparative assessment of nanomaterial definitions and safety evaluation considerations.

Science.gov (United States)

Boverhof, Darrell R; Bramante, Christina M; Butala, John H; Clancy, Shaun F; Lafranconi, Mark; West, Jay; Gordon, Steve C

2015-10-01

Nanomaterials continue to bring promising advances to science and technology. In concert have come calls for increased regulatory oversight to ensure their appropriate identification and evaluation, which has led to extensive discussions about nanomaterial definitions. Numerous nanomaterial definitions have been proposed by government, industry, and standards organizations. We conducted a comprehensive comparative assessment of existing nanomaterial definitions put forward by governments to highlight their similarities and differences. We found that the size limits used in different definitions were inconsistent, as were considerations of other elements, including agglomerates and aggregates, distributional thresholds, novel properties, and solubility. Other important differences included consideration of number size distributions versus weight distributions and natural versus intentionally-manufactured materials. Overall, the definitions we compared were not in alignment, which may lead to inconsistent identification and evaluation of nanomaterials and could have adverse impacts on commerce and public perceptions of nanotechnology. We recommend a set of considerations that future discussions of nanomaterial definitions should consider for describing materials and assessing their potential for health and environmental impacts using risk-based approaches within existing assessment frameworks. Our intent is to initiate a dialogue aimed at achieving greater clarity in identifying those nanomaterials that may require additional evaluation, not to propose a formal definition. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

Requirements for SSC central computing staffing (conceptual)

International Nuclear Information System (INIS)

Pfister, J.

1985-01-01

Given a computation center with --10,000 MIPS supporting --1,000 users, what are the staffing requirements? The attempt in this paper is to list the functions and staff size required in a central computing or centrally supported computing complex. The organization assumes that although considerable computing power would exist (mostly for online) in the four interaction regions (IR) that there are functions/capabilities better performed outside the IR and in this model at a ''central computing facility.'' What follows is one staffing approach, not necessarily optimal, with certain assumptions about numbers of computer systems, media, networks and system controls, that is, one would get the best technology available. Thus, it is speculation about what the technology may bring and what it takes to operate it. From an end user support standpoint it is less clear, given the geography of an SSC, where and what the consulting support should look like and its location

Automation and robotics considerations for a lunar base

Science.gov (United States)

Sliwa, Nancy E.; Harrison, F. Wallace, Jr.; Soloway, Donald I.; Mckinney, William S., Jr.; Cornils, Karin; Doggett, William R.; Cooper, Eric G.; Alberts, Thomas E.

1992-01-01

An envisioned lunar outpost shares with other NASA missions many of the same criteria that have prompted the development of intelligent automation techniques with NASA. Because of increased radiation hazards, crew surface activities will probably be even more restricted than current extravehicular activity in low Earth orbit. Crew availability for routine and repetitive tasks will be at least as limited as that envisioned for the space station, particularly in the early phases of lunar development. Certain tasks are better suited to the untiring watchfulness of computers, such as the monitoring and diagnosis of multiple complex systems, and the perception and analysis of slowly developing faults in such systems. In addition, mounting costs and constrained budgets require that human resource requirements for ground control be minimized. This paper provides a glimpse of certain lunar base tasks as seen through the lens of automation and robotic (A&R) considerations. This can allow a more efficient focusing of research and development not only in A&R, but also in those technologies that will depend on A&R in the lunar environment.

Requirements and Technology Advances for Global Wind Measurement with a Coherent Lidar: A Shrinking Gap

Science.gov (United States)

Kavaya, Michael J.; Kavaya, Michael J.; Yu, Jirong; Koch, Grady J.; Amzajerdian, Farzin; Singh, Upendra N.; Emmitt, G. David

2007-01-01

Early concepts to globally measure vertical profiles of vector horizontal wind from space planned on an orbit height of 525 km, a single pulsed coherent Doppler lidar system to cover the full troposphere, and a continuously rotating telescope/scanner that mandated a vertical line of sight wind profile from each laser shot. Under these conditions system studies found that laser pulse energies of approximately 20 J at 10 Hz pulse repetition rate with a rotating telescope diameter of approximately 1.5 m was required. Further requirements to use solid state laser technology and an eyesafe wavelength led to the relatively new 2-micron solid state laser. With demonstrated pulse energies near 20 mJ at 5 Hz, and no demonstration of a rotating telescope maintaining diffraction limited performance in space, the technology gap between requirements and demonstration was formidable. Fortunately the involved scientists and engineers set out to reduce the gap, and through a combination of clever ideas and technology advances over the last 15 years, they have succeeded. This paper will detail the gap reducing factors and will present the current status.

Nuclear power of the coming century and requirements to the nuclear technology

International Nuclear Information System (INIS)

Orlov, V.; Leonov, V.; Sila-Novitski, A.; Smirnov, V.; Tsikunov, V.; Filin, A.

2001-01-01

Current state of nuclear power in the world has been considered and the reasons for its falling short of the great expectations relating to its vigorous development in the outgoing century are considered. Anticipated energy demand of mankind in the next century is evaluated, suggesting that with exhausted resources of cheap fossil fuel and ecological restrictions it can be satisfied by means of a new nuclear technology meeting the requirements of large-scale power generation in terms of safety and economic indices, moreover, the technology can be elaborated in the context of achievements made in civil and military nuclear engineering. Since the developing countries are the most interested parties, it is just their initiative in the development of nuclear technology at the next stage that could provide an impetus for its actual advance. It is shown that large-scale development of nuclear power, being adequate to increase in energy demand, is possible even if solely large NPP equipped with breeders providing BR≥1 are constructed. Requirements for the reactor and fuel cycle technologies are made, their major aspects being: efficient utilization of Pu accumulated and reduction of U specific consumption by at least an order of magnitude; natural inherent safety and deterministic elimination of accidents involving high radioactive releases; assurance of a balance between radiation hazard posed by radioactive wastes disposed and uranium extracted from the ground; nuclear weapons nonproliferation due to fuel reprocessing ruling out potentiality of Pu diversion; reduction of the new generation reactor costs below the costs of today's LWR. (author)

Safety and security considerations for the transport of spent teletherapy units

International Nuclear Information System (INIS)

Mallaupoma, Mario; Paez, Jose; Huatay, Luis; Cruz, Walter

2008-01-01

Among the applications of nuclear technology, a practice widely used and generates many benefits to society are teletherapy applications. Many of the teletherapy units used contain a source of cobalt-60 and after their useful life they have to be dismantled and transported to a safe place. In this case were transported two units with an activity of more than 75 TBq . This paper presents safety and security considerations for the transport of the teletherapy units according to the recommendations of actual state of art. It is described all facets of safe transport by means of a set of technical and administrative safety requirements and controls, including the actions required by the consignor and carrier. The main emphasis was put on the stages of transport operations that give rise to exposure to radiation like packing, preparation, loading, handling, storage in transit and movement of packages of radioactive material. On the other side some security actions were considered in order to prevent theft, sabotage or other malicious acts during the transport of the packages. As a conclusion it must be mentioned that both safety and security considerations are very important aspects that must be taking in account for the transport of high activity radioactive material. (author)

'Emerging technologies for the changing global market' - Prioritization methodology for chemical replacement

Science.gov (United States)

Cruit, Wendy; Schutzenhofer, Scott; Goldberg, Ben; Everhart, Kurt

1993-01-01

This project served to define an appropriate methodology for effective prioritization of technology efforts required to develop replacement technologies mandated by imposed and forecast legislation. The methodology used is a semiquantitative approach derived from quality function deployment techniques (QFD Matrix). This methodology aims to weight the full environmental, cost, safety, reliability, and programmatic implications of replacement technology development to allow appropriate identification of viable candidates and programmatic alternatives. The results will be implemented as a guideline for consideration for current NASA propulsion systems.

40 CFR 51.912 - What requirements apply for reasonably available control technology (RACT) and reasonably...

Science.gov (United States)

2010-07-01

...) What is the Reasonably Available Control Measures (RACM) requirement for areas designated nonattainment... 40 Protection of Environment 2 2010-07-01 2010-07-01 false What requirements apply for reasonably available control technology (RACT) and reasonably available control measures (RACM) under the 8-hour NAAQS...

Flexible energy-storage devices: design consideration and recent progress.

Science.gov (United States)

Wang, Xianfu; Lu, Xihong; Liu, Bin; Chen, Di; Tong, Yexiang; Shen, Guozhen

2014-07-23

Flexible energy-storage devices are attracting increasing attention as they show unique promising advantages, such as flexibility, shape diversity, light weight, and so on; these properties enable applications in portable, flexible, and even wearable electronic devices, including soft electronic products, roll-up displays, and wearable devices. Consequently, considerable effort has been made in recent years to fulfill the requirements of future flexible energy-storage devices, and much progress has been witnessed. This review describes the most recent advances in flexible energy-storage devices, including flexible lithium-ion batteries and flexible supercapacitors. The latest successful examples in flexible lithium-ion batteries and their technological innovations and challenges are reviewed first. This is followed by a detailed overview of the recent progress in flexible supercapacitors based on carbon materials and a number of composites and flexible micro-supercapacitors. Some of the latest achievements regarding interesting integrated energy-storage systems are also reviewed. Further research direction is also proposed to surpass existing technological bottle-necks and realize idealized flexible energy-storage devices. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Consequences for people from changed economic requirements and implementations of new technology

International Nuclear Information System (INIS)

Myhre, L.A.

1994-01-01

The offshore oil and gas business has reached mature levels where improvements and efficiency, optimisation and down-sizing are necessary to achieve required economic performance. The paper discusses the oil worker in future with the focus on manning and safety as a consequence of new technologies and cost reduction. 1 fig

GENERIC VERIFICATION PROTOCOL FOR DETERMINATION OF EMISSIONS REDUCTIONS FROM SELECTIVE CATALYTIC REDUCTIONS CONTROL TECHNOLOGIES FOR HIGHWAY, NONROAD, AND STATIONARY USE DIESEL ENGINES

Science.gov (United States)

The protocol describes the Environmental Technology Verification (ETV) Program's considerations and requirements for verification of emissions reduction provided by selective catalytic reduction (SCR) technologies. The basis of the ETV will be comparison of the emissions and perf...

Post-marketing access to orphan drugs: a critical analysis of health technology assessment and reimbursement decision-making considerations

Directory of Open Access Journals (Sweden)

Iskrov G

2014-01-01

Full Text Available Georgi Iskrov, Rumen Stefanov Department of Social Medicine and Public Health, Medical University of Plovdiv, Plovdiv, Bulgaria Abstract: This study aims to explore the current rationale of post-marketing access to orphan drugs. As access to orphan medicinal products depends on assessment and appraisal by health authorities, this article is focused on health technology assessment (HTA and reimbursement decision-making considerations for orphan drugs. A critical analysis may identify important factors that could predetermine the combined outcomes of these two processes. Following this objective, an analytical framework was developed, comprising three overlaying issues: to outline what is currently done and what needs to be done in the field of HTA of orphan drugs, to synthesize important variables relevant to the reimbursement decision-making about orphan drugs, and to unveil relationships between theory and practice. Methods for economic evaluation, cost-effectiveness threshold, budget impact, uncertainty of evidence, criteria in reimbursement decision-making, and HTA research agenda are all explored and discussed from an orphan drug perspective. Reimbursement decision-making for orphan drugs is a debate of policy priorities, health system specifics, and societal attitudes. Health authorities need to pursue a multidisciplinary analysis on a range of criteria, ensuring an explicit understanding of the trade-offs for decisions related to eligibility for reimbursement. The only reasonable way to accept a higher valuation of orphan drug benefits is if these are demonstrated empirically. Rarity means that the quality of orphan drug evidence is not the same as for conventional therapies. Closing this gap is another crucial point for the timely access to these products. The generation of evidence goes far beyond pre-market authorization trials and requires transnational cooperation and coordination. Early constructive dialogue among orphan drug

Guidance manual for conducting technology demonstration activities

International Nuclear Information System (INIS)

Jolley, R.L.; Morris, M.I.; Singh, S.P.N.

1991-12-01

This demonstration guidance manual has been prepared to assist Martin Marietta Energy Systems, Inc. (Energy Systems), staff in conducting demonstrations. It is prepared in checklist style to facilitate its use and assumes that Energy Systems personnel have project management responsibility. In addition to a detailed step-by-step listing of procedural considerations, a general checklist, logic flow diagram, and several examples of necessary plans are included to assist the user in developing an understanding of the many complex activities required to manage technology demonstrations. Demonstrations are pilot-scale applications of often innovative technologies to determine the commercial viability of the technologies to perform their designed function. Demonstrations are generally conducted on well-defined problems for which existing technologies or processes are less than satisfactory in terms of effectiveness, cost, and/or regulatory compliance. Critically important issues in demonstration management include, but are not limited to, such factors as communications with line and matrix management and with the US Department of Energy (DOE) and Energy Systems staff responsible for management oversight, budgetary and schedule requirements, regulatory compliance, and safety

Guidance manual for conducting technology demonstration activities

Energy Technology Data Exchange (ETDEWEB)

Jolley, Robert L.; Morris, Michael I.; Singh, Suman P.N.

1991-12-01

This demonstration guidance manual has been prepared to assist Martin Marietta Energy Systems, Inc. (Energy Systems), staff in conducting demonstrations. It is prepared in checklist style to facilitate its use and assumes that Energy Systems personnel have project management responsibility. In addition to a detailed step-by-step listing of procedural considerations, a general checklist, logic flow diagram, and several examples of necessary plans are included to assist the user in developing an understanding of the many complex activities required to manage technology demonstrations. Demonstrations are pilot-scale applications of often innovative technologies to determine the commercial viability of the technologies to perform their designed function. Demonstrations are generally conducted on well-defined problems for which existing technologies or processes are less than satisfactory in terms of effectiveness, cost, and/or regulatory compliance. Critically important issues in demonstration management include, but are not limited to, such factors as communications with line and matrix management and with the US Department of Energy (DOE) and Energy Systems staff responsible for management oversight, budgetary and schedule requirements, regulatory compliance, and safety.

Technology requirements to be addressed by the NASA Lewis Research Center Cryogenic Fluid Management Facility program

Science.gov (United States)

Aydelott, J. C.; Rudland, R. S.

1985-01-01

The NASA Lewis Research Center is responsible for the planning and execution of a scientific program which will provide advance in space cryogenic fluid management technology. A number of future space missions were identified that require or could benefit from this technology. These fluid management technology needs were prioritized and a shuttle attached reuseable test bed, the cryogenic fluid management facility (CFMF), is being designed to provide the experimental data necessary for the technology development effort.

Safety considerations for compressed hydrogen storage systems

International Nuclear Information System (INIS)

Gleason, D.

2006-01-01

An overview of the safety considerations for various hydrogen storage options, including stationary, vehicle storage, and mobile refueling technologies. Indications of some of the challenges facing the industry as the demand for hydrogen fuel storage systems increases. (author)

Technology readiness levels and technology status for selected long term/high payoff technologies on the RLV program

Science.gov (United States)

Rosmait, Russell L.

1996-01-01

The development of a new space transportation system in a climate of constant budget cuts and staff reductions can be and is a difficult task. It is no secret that NASA's current launching system consumes a very large portion of NASA funding and requires a large army of people to operate & maintain the system. The new Reusable Launch Vehicle (RLV) project and it's programs are faced with a monumental task of making the cost of access to space dramatically lower and more efficient than NASA's current system. With pressures from congressional budget cutters and also increased competition and loss of market share from international agencies RLV's first priority is to develop a 'low-cost, reliable transportation to earth orbit.' One of the RLV's major focus in achieving low-cost, reliable transportation to earth orbit is to rely on the maturing of advanced technologies. The technologies for the RLV are numerous and varied. Trying to assess their current status, within the RLV development program is paramount. There are several ways to assess these technologies. One way is through the use of Technology Readiness Levels (TRL's). This project focused on establishing current (summer 95) 'worst case' TRL's for six selected technologies that are under consideration for use within the RLV program. The six technologies evaluated were Concurrent Engineering, Embedded Sensor Technology, Rapid Prototyping, Friction Stir Welding, Thermal Spray Coatings, and VPPA Welding.

40 CFR 230.91 - Purpose and general considerations.

Science.gov (United States)

2010-07-01

... done after taking into consideration cost, existing technology, and logistics in light of overall... national or regional level. No modifications to the basic application, meaning, or intent of this subpart...

Meeting United States re-licensing requirements related to environmental protection using innovative technologies

International Nuclear Information System (INIS)

Taft, E.P.; Winchell, F.C.; Cook, T.C.

1998-01-01

Procedure for meeting re-licensing requirements related to environmental protection and an overview of several new and emerging technologies regarding the development of ways to prevent fish passage through hydraulic turbines at hydroelectric power dams is described. Fish mortality and injury has long been a concern in the hydroelectric industry and research and development efforts have been ongoing since the 1970s to prevent fish passage through turbines. Several new and emerging technologies are examined that have the potential for wide-spread cost-effective applications

Industrial scale application of irradiation technologies in Turkey

International Nuclear Information System (INIS)

Siyakus, G.

2001-01-01

Sufficient and safer foods, better health care, cleaner environment and higher life standards are the shared objectives and desires of the humankind. The rapid increase in the world population necessitates the development and application of new technologies in order to meet these desires. The need for such technologies is more important for developing countries, when it is thought that the major share of the population increase is originating from that regions. Irradiation technology, as a rather new one, may have a considerable contribution in this respect, providing that proper application . Although, a wide range of application areas, changing from flue gas treatment to polymer production, exists in this respect, transferring or developing new technologies requires time, trained personnel and equipment

Technology requirements for fusion--fission reactors based on magnetic-mirror confinement

International Nuclear Information System (INIS)

Moir, R.W.

1978-01-01

Technology requirements for mirror hybrid reactors are discussed. The required 120-keV neutral beams can use positive ions. The magnetic fields are 8 T or under and can use NbTi superconductors. The value of Q (where Q is the ratio of fusion power to injection power) should be in the range of 1 to 2 for economic reasons relating to the cost of recirculating power. The wall loading of 14-MeV neutrons should be in the range of 1 to 2 MW/m 2 for economic reasons. Five-times higher wall loading will likely be needed if fusion reactors are to be economical. The magnetic mirror experiments 2XIIB, TMX, and MFTF are described

Dust Interactions on Small Solar System Bodies and Technology Considerations for Exploration

Science.gov (United States)

Kobrick, Ryan,; Hoffman, Jeffrey; Pavone, Marco; Street, Kenneth; Rickman, Douglas

2014-01-01

Small-bodies such as asteroids and Mars' moons Phobos and Deimos have relatively unknown regolith environments. It is hypothesized that dust preserved in the regolith on the surfaces will have similar mechanical properties to lunar dust because of similar formation processes from micrometeorite bombardment, low relative gravity for slow settling times, and virtually no weathering because there is no atmosphere. This combination of processes infers that small-body dust particles will be highly angular and retain abrasive properties. The focus of this paper uses the mission architecture and engineering design for an asteroid hopper known as Hedgehog, a spherical spacecraft with several symmetric spikes used to aid with tumbling mobility in a low gravity environment. Dust abrasion considerations are highlighted throughout the paper relating to the lead authors' previous work, but act as an example of one of many important dust or regolith physical properties that need to be considered for future exploration. Measurable regolith properties are summarized in order to identify technologies that may be useful for exploration in terms of scientific return and spacecraft design. Previous instruments are summarized in this paper that could be used on the Hedgehog. Opportunities for hardware payloads are highlighted that include low mass solutions or dualpurpose instruments that can measure regolith or dust properties. Finally, dust mitigation suggestions are made for vehicles of this mobility profile.

33 CFR 332.1 - Purpose and general considerations.

Science.gov (United States)

2010-07-01

... available and capable of being done after taking into consideration cost, existing technology, and logistics... and the Corps at the national or regional level. No modifications to the basic application, meaning...

Large Deployable Reflector (LDR) system concept and technology definition study. Analysis of space station requirements for LDR

Science.gov (United States)

Agnew, Donald L.; Vinkey, Victor F.; Runge, Fritz C.

1989-01-01

A study was conducted to determine how the Large Deployable Reflector (LDR) might benefit from the use of the space station for assembly, checkout, deployment, servicing, refurbishment, and technology development. Requirements that must be met by the space station to supply benefits for a selected scenario are summarized. Quantitative and qualitative data are supplied. Space station requirements for LDR which may be utilized by other missions are identified. A technology development mission for LDR is outlined and requirements summarized. A preliminary experiment plan is included. Space Station Data Base SAA 0020 and TDM 2411 are updated.

Large Deployable Reflector (LDR) system concept and technology definition study. Analysis of space station requirements for LDR

Science.gov (United States)

Agnew, Donald L.; Vinkey, Victor F.; Runge, Fritz C.

1989-04-01

A study was conducted to determine how the Large Deployable Reflector (LDR) might benefit from the use of the space station for assembly, checkout, deployment, servicing, refurbishment, and technology development. Requirements that must be met by the space station to supply benefits for a selected scenario are summarized. Quantitative and qualitative data are supplied. Space station requirements for LDR which may be utilized by other missions are identified. A technology development mission for LDR is outlined and requirements summarized. A preliminary experiment plan is included. Space Station Data Base SAA 0020 and TDM 2411 are updated.

Important requirements for RF generators for Accelerator-Driven Transmutation Technologies (ADTT)

International Nuclear Information System (INIS)

Lynch, M.T.; Tallerico, P.J.; Lawrence, G.P.

1994-01-01

All Accelerator-Driven Transmutation applications require very large amounts of RF Power. For example, one version of a Plutonium burning system requires an 800-MeV, 80-mA, proton accelerator running at 100% duty factor. This accelerator requires approximately 110-MW of continuous RF power if one assumes only 10% reserve power for control of the accelerator fields. In fact, to minimize beam spill, the RF controls may need as much as 15 to 20% of reserve power. In addition, unlike an electron accelerator in which the beam is relativistic, a failed RF station can disturb the synchronism of the beam, possibly shutting down the entire accelerator. These issues and more lead to a set of requirements for the RF generators which are stringent, and in some cases, conflicting. In this paper, we will describe the issues and requirements, and outline a plan for RF generator development to meet the needs of the Accelerator-Driven Transmutation Technologies. The key issues which will be discussed include: operating efficiency, operating linearity, effect on the input power grid, bandwidth, gain, reliability, operating voltage, and operating current

32 CFR 643.83 - Consideration.

Science.gov (United States)

2010-07-01

... consideration in an amount equal to the fair market value as established by recognized appraisal practices. As... thereof, will not require fair market value when the purpose of the easement is to serve the public...

Spallation-based science and technology and associated nuclear data requirements

International Nuclear Information System (INIS)

Bowman, C.D.; Lisowski, P.W.; Arthur, E.D.

1990-01-01

Rapid advances in accelerator technology in recent years promise average proton beam currents as high as 250 mA with energies greater than one GeV. Such an accelerator could produce very high intensities of neutrons and other nuclear particles thus opening up new areas of science and technology. An example is the efficient burning of transuranic and fission product waste. With such a spallation-burner it appears that high-level waste might be converted to low-level waste on a time scale comparable to the human lifespan at a reasonable additional cost for electric power generation. The emphasis of this paper is on the design of a high power proton target for neutron production, on the nuclear data needed to operate this target safely and effectively, and on data requirements for transmutation. It is suggested that a pilot facility consisting of a 1.6 GeV accelerator and target operating at 25 ma is the next major step in developing this technology. Bursts of protons near the terawatt level might also be generated using such an accelerator with a proton accumulator ring. Research prospects based on such proton bursts are briefly described. The status of established nuclear data needs and of accelerator-based sources for nuclear data measurements is reviewed. (author)

Technology Requirements For a Square-Meter, Arcsecond-Resolution Telescope for X-Rays: The SMART-X Mission

Science.gov (United States)

Schwartz, Daniel A.; Allured, Ryan; Bookbinder, Jay; Cotroneo, Vincenzo; Forman, William; Freeman, Mark; McMuldroch, Stuart; Reid, Paul; Tananbaum, Harvey; Vikhlinin, Alexey;

Advanced clean coal utilization technologies

Energy Technology Data Exchange (ETDEWEB)

Moritomi, Hiroshi [National Inst. for Resources and Environment, Tsukuba, Ibaraki (Japan)

1993-12-31

The most important greenhouse gas is CO{sub 2} from coal utilization. Ways of mitigating CO{sub 2} emissions include the use of alternative fuels, using renewable resources and increasing the efficiency of power generation and end use. Adding to such greenhouse gas mitigation technologies, post combustion control by removing CO{sub 2} from power station flue gases and then storing or disposing it will be available. Although the post combustion control have to be evaluated in a systematic manner relating them to whether they are presently available technology, to be available in the near future or long term prospects requiring considerable development, it is considered to be a less promising option owing to the high cost and energy penalty. By contrast, abatement technologies aimed at improving conversion efficiency or reducing energy consumption will reduce emissions while having their own commercial justification.

Military power requirements and backup power considerations

International Nuclear Information System (INIS)

Botts, T.E.

1986-01-01

All US Air Force (USAF) facilities have certain critical power requirements that must be met in order to carry out their mission successfully. Internal USAF studies have shown that the mission can degrade precipitously as the available power decreases below the mission critical level. Now, more than ever before, the military and private industry are finding that certain functions, such as automated data processing and automated process control, respond catastrophically to power reductions. Furthermore, increased reliance on electrical power means, in the case of the Air Force, that critical power requirements are anticipated to increase by half over the next 15 yr. For these reasons and others, the USAF is investigating several means of improving the availability of electric power under adverse conditions above that which can be provided by an off-base supplier. Among the approaches to this problem being pursued at this time are a program to improve all sorts of generator sets on a service-wide basis and the Multimegawatt Terrestrial Power (MTP) Program, which is pursuing the design and testing of a small dedicated nuclear power source to provide critical mission power. The purpose of this paper is to provide some insight into some of the issues associated with USAF power programs

An assistive technology for hearing-impaired persons: analysis, requirements and architecture.

Science.gov (United States)

Mielke, Matthias; Grunewald, Armin; Bruck, Rainer

2013-01-01

In this contribution, a concept of an assistive technology for hearing-impaired and deaf persons is presented. The concept applies pattern recognition algorithms and makes use of modern communication technology to analyze the acoustic environment around a user, identify critical acoustic signatures and give an alert to the user when an event of interest happened. A detailed analysis of the needs of deaf and hearing-impaired people has been performed. Requirements for an adequate assisting device have been derived from the results of the analysis, and have been turned into an architecture for its implementation that will be presented in this article. The presented concept is the basis for an assistive system which is now under development at the Institute of Microsystem Engineering at the University of Siegen.

An overview of exhaust emissions regulatory requirements and control technology for stationary natural gas engines

International Nuclear Information System (INIS)

Ballard, H.N.; Hay, S.C.; Shade, W.N. Jr.

1992-01-01

In this paper a practical overview of stationary natural gas engine exhaust emissions control technology and trends in emissions regulatory requirements is presented. Selective and non-selective catalytic reduction and lean burn technologies are compared. Particular emphasis is focussed on implications of the Clean Air Act of 1990. Recent emissions reduction conversion kit developments and a practical approach to continuous monitoring are discussed

Soil treatment technologies: Comparison of field experiences

International Nuclear Information System (INIS)

Hodges, H.I.; Jackson, D.W.; Kline, K.

1992-01-01

A number of on-site soil treatment technologies are available for closure of oil-field waste pits, leaking underground storage tank (LUST) sites, and general hydrocarbon contamination. This paper will contrast Separation Systems Consultants, Inc.'s (SSCI's) field experiences with the following soil restoration techniques: (1) Land Treatment using indigenous microbes; (2) Land Farming using commercial microbes; (3) Low Temperature Thermal Treatment; (4) Solidification. The technologies will be contrasted in terms of regulatory constraints and requirements, key set-up and maintenance consideration, selection factors. Included in the regulatory contrast is the authors' perception of regulatory attitudes toward the techniques. Because this paper is based on actual field experience and projects, the practical aspects of making the technologies work is emphasized

General B factory design considerations

International Nuclear Information System (INIS)

Zisman, M.S.

1992-12-01

We describe the general considerations that go into the design of an asymmetric B factory collider. Justification is given for the typical parameters of such a facility, and the physics and technology challenges that arise from these parameter choices are discussed. Cost and schedule issues for a B factory are discussed briefly. A summary of existing proposals is presented, noting their similarities and differences

THE BIOTERRORISM THREAT: TECHNOLOGICAL AND POLITICAL CONSIDERATIONS

Energy Technology Data Exchange (ETDEWEB)

J. F. PILAT

2000-03-01

Bioterrorism--along with biowarfare, from which it may not always be distinguishable in practice--will be a feature of the strategic landscape in the 21st century and is high on the US national security agenda. Bioterrorism poses a potential threat to the US population, agriculture, interests, friends and allies, and military forces (asymmetric threats). Yet these possibilities have not been widely pursued or realized by terrorists. The perceived threat is far worse than anything experienced to date, and is largely technologically driven.

Distal technologies and type 1 diabetes management.

Science.gov (United States)

Duke, Danny C; Barry, Samantha; Wagner, David V; Speight, Jane; Choudhary, Pratik; Harris, Michael A

2018-02-01

Type 1 diabetes requires intensive self-management to avoid acute and long-term health complications. In the past two decades, substantial advances in technology have enabled more effective and convenient self-management of type 1 diabetes. Although proximal technologies (eg, insulin pumps, continuous glucose monitors, closed-loop and artificial pancreas systems) have been the subject of frequent systematic and narrative reviews, distal technologies have received scant attention. Distal technologies refer to electronic systems designed to provide a service remotely and include heterogeneous systems such as telehealth, mobile health applications, game-based support, social platforms, and patient portals. In this Review, we summarise the empirical literature to provide current information about the effectiveness of available distal technologies to improve type 1 diabetes management. We also discuss privacy, ethics, and regulatory considerations, issues of global adoption, knowledge gaps in distal technology, and recommendations for future directions. Copyright © 2018 Elsevier Ltd. All rights reserved.

Considerations for the Next Revision of NASA's Space Telecommunications Radio System Architecture

Science.gov (United States)

Johnson, Sandra K.; Handler, Louis M.; Briones, Janette C.

2016-01-01

Development of NASA's Software Defined Radio architecture, the Space Telecommunication Radio System (STRS), was initiated in 2004 with a goal of reducing the cost, risk and schedule when implementing Software Defined Radios (SDR) for National Aeronautics and Space Administration (NASA) space missions. Since STRS was first flown in 2012 on three Software Defined Radios on the Space Communication and Navigation (SCaN) Testbed, only minor changes have been made to the architecture. Multiple entities have since implemented the architecture and provided significant feedback for consideration for the next revision of the standard. The focus for the first set of updates to the architecture is items that enhance application portability. Items that require modifications to existing applications before migrating to the updated architecture will only be considered if there is compelling reasons to make the change. The significant suggestions that were further evaluated for consideration include expanding and clarifying the timing Application Programming Interfaces (APIs), improving handle name and identification (ID) definitions and use, and multiple items related to implementation of STRS Devices. In addition to ideas suggested while implementing STRS, SDR technology has evolved significantly and this impact to the architecture needs to be considered. These include incorporating cognitive concepts - learning from past decisions and making new decisions that the radio can act upon. SDRs are also being developed that do not contain a General Purpose Module - which is currently required for the platform to be STRS compliant. The purpose of this paper is to discuss the comments received, provide a summary of the evaluation considerations, and examine planned dispositions.

Technology and Research Requirements for Combating Human Trafficking: Enhancing Communication, Analysis, Reporting, and Information Sharing

Energy Technology Data Exchange (ETDEWEB)

Kreyling, Sean J.; West, Curtis L.; Olson, Jarrod

2011-03-17

DHS’ Science & Technology Directorate directed PNNL to conduct an exploratory study on the domain of human trafficking in the Pacific Northwest in order to examine and identify technology and research requirements for enhancing communication, analysis, reporting, and information sharing – activities that directly support efforts to track, identify, deter, and prosecute human trafficking – including identification of potential national threats from smuggling and trafficking networks. This effort was conducted under the Knowledge Management Technologies Portfolio as part of the Integrated Federal, State, and Local/Regional Information Sharing (RISC) and Collaboration Program.

C-Band Airport Surface Communications System Standards Development. Phase II Final Report. Volume 1: Concepts of Use, Initial System Requirements, Architecture, and AeroMACS Design Considerations

Science.gov (United States)

Hall, Edward; Isaacs, James; Henriksen, Steve; Zelkin, Natalie

2011-01-01

This report is provided as part of ITT s NASA Glenn Research Center Aerospace Communication Systems Technical Support (ACSTS) contract NNC05CA85C, Task 7: New ATM Requirements-Future Communications, C-Band and L-Band Communications Standard Development and was based on direction provided by FAA project-level agreements for New ATM Requirements-Future Communications. Task 7 included two subtasks. Subtask 7-1 addressed C-band (5091- to 5150-MHz) airport surface data communications standards development, systems engineering, test bed and prototype development, and tests and demonstrations to establish operational capability for the Aeronautical Mobile Airport Communications System (AeroMACS). Subtask 7-2 focused on systems engineering and development support of the L-band digital aeronautical communications system (L-DACS). Subtask 7-1 consisted of two phases. Phase I included development of AeroMACS concepts of use, requirements, architecture, and initial high-level safety risk assessment. Phase II builds on Phase I results and is presented in two volumes. Volume I (this document) is devoted to concepts of use, system requirements, and architecture, including AeroMACS design considerations. Volume II describes an AeroMACS prototype evaluation and presents final AeroMACS recommendations. This report also describes airport categorization and channelization methodologies. The purposes of the airport categorization task were (1) to facilitate initial AeroMACS architecture designs and enable budgetary projections by creating a set of airport categories based on common airport characteristics and design objectives, and (2) to offer high-level guidance to potential AeroMACS technology and policy development sponsors and service providers. A channelization plan methodology was developed because a common global methodology is needed to assure seamless interoperability among diverse AeroMACS services potentially supplied by multiple service providers.

Canadian Experience in Nuclear Power Technology Transfer

International Nuclear Information System (INIS)

Boulton, J.

1987-01-01

Technology transfer has and will continue to play a major role in the development of nuclear power programs. From the early beginnings of the development of the peaceful uses of nuclear power by just a few nations in the mid-1940s there has been a considerable transfer of technology and today 34 countries have nuclear programs in various stages of development. Indeed, some of the major nuclear vendors achieves their present position through a process of technology transfer and subsequent development. Canada, one of the early leaders in the development of nuclear power, has experience with a wide range of programs bout within its own borders and with other countries. This paper briefly describes this experience and the lessons learned from Canada's involvement in the transfer of nuclear power technology. Nuclear technology is complex and diverse and yet it can be assimilated by a nation given a fire commitment of both suppliers and recipients of technology to achieve success. Canada has reaped large benefits from its nuclear program and we believe this has been instrumentally linked to the sharing of goals and opportunity for participation over extended periods of time by many interests within the Canadian infrastructure. While Canada has accumulated considerable expertise in nuclear technology transfer, we believe there is still much for US to learn. Achieving proficiency in any of the many kinds of nuclear related technologies will place a heavy burden on the financial and human resources of a nation. Care must be taken to plan carefully the total criteria which will assure national benefits in industrial and economic development. Above all, effective transfer of nuclear technology requires a long term commitment by both parties

A REVIEW OF MILD COMBUSTION AND OPEN FURNACE DESIGN CONSIDERATION

Directory of Open Access Journals (Sweden)

M.M. Noor

2012-12-01

Full Text Available Combustion is still very important to generate energy. Moderate or Intense Low-oxygen Dilution (MILD combustion is one of the best new technologies for clean and efficient combustion. MILD combustion has been proven to be a promising combustion technology in industrial applications with decreased energy consumption due to the uniformity of its temperature distribution. It is clean compared to traditional combustion due to producing low NOx and CO emissions. This article provides a review and discussion of recent research and developments in MILD. The issue and applications are summarized, with some suggestions presented on the upgrading and application of MILD in the future. Currently MILD combustion has been successfully applied in closed furnaces. The preheating of supply air is no longer required since the recirculation inside the enclosed furnace already self-preheats the supply air and self-dilutes the oxygen in the combustion chamber. The possibility of using open furnace MILD combustion will be reviewed. The design consideration for open furnace with exhaust gas re-circulation (EGR was discussed.

23 CFR 420.207 - What are the requirements for research, development, and technology transfer work programs?

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false What are the requirements for research, development, and..., DEPARTMENT OF TRANSPORTATION PLANNING AND RESEARCH PLANNING AND RESEARCH PROGRAM ADMINISTRATION Research, Development and Technology Transfer Program Management § 420.207 What are the requirements for research...

Design considerations for mechanical snubbers

International Nuclear Information System (INIS)

Severud, L.K.; Summers, G.D.

1980-03-01

The use of mechanical snubbers to restrain piping during an earthquake event is becoming more common in design of nuclear power plants. The design considerations and qualification procedures for mechanical snubbers used on the Fast Flux Test Facility will be presented. Design precautions and requirements for both normal operation and seismic operation are necessary. Effects of environmental vibration (nonseismic) induced through the piping by pump shaft imbalance and fluid flow oscillations will be addressed. Also, the snubber dynamic characteristics of interest to design and snubber design application considerations will be discussed

40 CFR 194.51 - Consideration of protected individual.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Consideration of protected individual... Individual and Ground-Water Protection Requirements § 194.51 Consideration of protected individual. Compliance assessments that analyze compliance with § 191.15 of this chapter shall assume that an individual...

40 CFR 194.52 - Consideration of exposure pathways.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Consideration of exposure pathways... Individual and Ground-Water Protection Requirements § 194.52 Consideration of exposure pathways. In compliance assessments that analyze compliance with § 191.15 of this chapter, all potential exposure pathways...

Spallation-based science and technology and associated nuclear data requirements

International Nuclear Information System (INIS)

Bowman, C.D.; Lisowski, P.W.; Arthur, E.D.

1990-01-01

Rapid advances in accelerator technology in recent years promise average proton beam currents as high as 250 mA with energies greater than one GeV. Such an accelerator could produce very high intensities of neutrons and other nuclear particles thus opening up new areas of science and technology. An example is the efficient burning of transuranic and fission product waste. With such a spallation-burner it appears that high-level waste might be converted to low-level waste on a time scale comparable to the human lifespan at a reasonable additional cost for electric power generation. The emphasis of this paper is on the design of a high power proton target for neutron production, on the nuclear data needed to operate this target safely and effectively, and on data requirements for transmutation. It is suggested that a pilot facility consisting of a 1.6 GeV accelerator and target operating at 25 ma is the next major step in developing this technology. Bursts of protons near the terawatt level might also be generated using such an accelerator with a proton accumulator ring. Research prospects based on such proton bursts are briefly described. The status of established nuclear data needs and of accelerator-based sources for nuclear data measurements is reviewed. 6 refs., 8 figs., 2 tabs

Why nuclear technology

International Nuclear Information System (INIS)

Vieira, Wilson J.; Ishiguro, Yuji; Urbina, Ligia M. Soto

1996-01-01

The importance of nuclear energy in the global society implies the nacional need to give priority and maintain an effective technology policy for nuclear science. In this work, it is considered three points that, although do not represent all the problems in the nuclear sector, were chosen because of their importance and need of change that require: evaluation of the Brazilian scientific policy, which is directed towards the publication in international periodicals, yielding more benefits to the developed countries; evaluation of the few and small investment in laboratories and research institutes, which are the natural producers of technology for the industry and service sectors; evaluation of the lack of concrete of concrete objectives in the universities and research institutes, whose policies are elaborated with-out the due consideration of the collective benefits. It is necessary a national plan for the nuclear are that makes investments in technology development, investments in the laboratories and research institutes, and that makes these universities and research institutes accountable for the success or failure to accomplish the proposed objectives. (author)

Key Technologies in the Context of Future Networks: Operational and Management Requirements

Directory of Open Access Journals (Sweden)

Lorena Isabel Barona López

2016-12-01

Full Text Available The concept of Future Networks is based on the premise that current infrastructures require enhanced control, service customization, self-organization and self-management capabilities to meet the new needs in a connected society, especially of mobile users. In order to provide a high-performance mobile system, three main fields must be improved: radio, network, and operation and management. In particular, operation and management capabilities are intended to enable business agility and operational sustainability, where the addition of new services does not imply an excessive increase in capital or operational expenditures. In this context, a set of key-enabled technologies have emerged in order to aid in this field. Concepts such as Software Defined Network (SDN, Network Function Virtualization (NFV and Self-Organized Networks (SON are pushing traditional systems towards the next 5G network generation.This paper presents an overview of the current status of these promising technologies and ongoing works to fulfill the operational and management requirements of mobile infrastructures. This work also details the use cases and the challenges, taking into account not only SDN, NFV, cloud computing and SON but also other paradigms.

International technology transfer

International Nuclear Information System (INIS)

Kwon, Won Gi

1991-11-01

This book introduces technology progress and economic growth, theoretical consideration of technology transfer, policy and mechanism on technology transfer of a developed country and a developing country, reality of international technology transfer technology transfer and industrial structure in Asia and the pacific region, technology transfer in Russia, China and Eastern Europe, cooperation of science and technology for development of Northeast Asia and strategy of technology transfer of Korea.

Technology Requirements for a Square Meter, Arcsecond Resolution Telescope for X-Rays: The SMART-X Mission

Science.gov (United States)

Schwartz, Daniel A.; Allured, Ryan; Bookbinder, Jay A.; Cotroneo, Vincenzo; Forman, William R.; Freeman, Mark D.; McMuldroch, Stuart; Reid, Paul B.; Tananbaum, Harvey; Vikhlinin, Alexey A.;

Evolving Technologies Require Educational Policy Change: Music Education for the 21st Century

Science.gov (United States)

Crawford, Renee

2013-01-01

There is growing discussion among education and government authorities on rethinking education in the 21st century. This increasing area of interest has come in response to the evolution of technology and its effect on the future needs and requirements of society. Online applications and social networking capabilities have accelerated in…

The Emerging Technology of Avatars: Some Educational Considerations

Science.gov (United States)

Blake, Anne M.; Moseley, James L.

2010-01-01

Avatars are gaining popularity as an emerging technology to facilitate learning and instruction. Avatars can be used as agents of e-learning applications or as part of immersive learning environments such as Second Life. Research indicates that avatar use has numerous potential benefits, including increased student engagement and opportunities for…

Requirements for effective technology transfer for engineering and project management. The views of the recipient country and the technology supplier

International Nuclear Information System (INIS)

Backhaus, K.W.

1986-04-01

Technology transfer in the area of engineering and project management for nuclear power plant projects is considered a rather complex and sophisticated matter. Therefore only within a long-term nuclear co-operation a meaningful transfer of such a multifaceted technology can reasonably be achieved. A long-term nuclear co-operation anticipates a nuclear power plant program consisting of a few nuclear power plants of a certain type and size in order to achieve the indispensable effect ''learning by doing''. The objectives of nuclear technology transfer may be in general or in particular; absorption of a foreign nuclear technology and its adaptation to the conditions and needs of the receiver's country; built-up of industrial infrastructure for planning, construction and operation of nuclear power plants; raising of the general industrial level and achieve a spin-off effect; creation of a basis for independent development of nuclear technology. The technology transfer on one side and the construction program of nuclear power plants on the other side cannot be practiced by two parallel but separated event, however, they form one unit. Contrary to the import of industrial equipment in terms of ''black box'', by means of a nuclear technology transfer the introduction of new dependencies will be prevented. The technology transfer can remarkably be facilitated by forming a joint venture engineering company in the recipient country. The required know-how potential within a certain time period determines the intensity of the technology transfer and consequently the man power to be involved. The realization of such technology transfer is demonstrated by means of practical examples. (author). 12 figs

Process cost and facility considerations in the selection of primary cell culture clarification technology.

Science.gov (United States)

Felo, Michael; Christensen, Brandon; Higgins, John

2013-01-01

The bioreactor volume delineating the selection of primary clarification technology is not always easily defined. Development of a commercial scale process for the manufacture of therapeutic proteins requires scale-up from a few liters to thousands of liters. While the separation techniques used for protein purification are largely conserved across scales, the separation techniques for primary cell culture clarification vary with scale. Process models were developed to compare monoclonal antibody production costs using two cell culture clarification technologies. One process model was created for cell culture clarification by disc stack centrifugation with depth filtration. A second process model was created for clarification by multi-stage depth filtration. Analyses were performed to examine the influence of bioreactor volume, product titer, depth filter capacity, and facility utilization on overall operating costs. At bioreactor volumes 5,000 L, clarification using centrifugation followed by depth filtration offers significant cost savings. For bioreactor volumes of ∼ 2,000 L, clarification costs are similar between depth filtration and centrifugation. At this scale, factors including facility utilization, available capital, ease of process development, implementation timelines, and process performance characterization play an important role in clarification technology selection. In the case study presented, a multi-product facility selected multi-stage depth filtration for cell culture clarification at the 500 and 2,000 L scales of operation. Facility implementation timelines, process development activities, equipment commissioning and validation, scale-up effects, and process robustness are examined. © 2013 American Institute of Chemical Engineers.

Leveraging CubeSat Technology to Address Nighttime Imagery Requirements over the Arctic

Science.gov (United States)

Pereira, J. J.; Mamula, D.; Caulfield, M.; Gallagher, F. W., III; Spencer, D.; Petrescu, E. M.; Ostroy, J.; Pack, D. W.; LaRosa, A.

2017-12-01

The National Oceanic and Atmospheric Administration (NOAA) has begun planning for the future operational environmental satellite system by conducting the NOAA Satellite Observing System Architecture (NSOSA) study. In support of the NSOSA study, NOAA is exploring how CubeSat technology funded by NASA can be used to demonstrate the ability to measure three-dimensional profiles of global temperature and water vapor. These measurements are critical for the National Weather Service's (NWS) weather prediction mission. NOAA is conducting design studies on Earth Observing Nanosatellites (EON) for microwave (EON-MW) and infrared (EON-IR) soundings, with MIT Lincoln Laboratory and NASA JPL, respectively. The next step is to explore the technology required for a CubeSat mission to address NWS nighttime imagery requirements over the Arctic. The concept is called EON-Day/Night Band (DNB). The DNB is a 0.5-0.9 micron channel currently on the operational Visible Infrared Imaging Radiometer Suite (VIIRS) instrument, which is part of the Suomi-National Polar-orbiting Partnership and Joint Polar Satellite System satellites. NWS has found DNB very useful during the long periods of darkness that occur during the Alaskan cold season. The DNB enables nighttime imagery products of fog, clouds, and sea ice. EON-DNB will leverage experiments carried out by The Aerospace Corporation's CUbesat MULtispectral Observation System (CUMULOS) sensor and other related work. CUMULOS is a DoD-funded demonstration of COTS camera technology integrated as a secondary mission on the JPL Integrated Solar Array and Reflectarray Antenna mission. CUMULOS is demonstrating a staring visible Si CMOS camera. The EON-DNB project will leverage proven, advanced compact visible lens and focal plane camera technologies to meet NWS user needs for nighttime visible imagery. Expanding this technology to an operational demonstration carries several areas of risk that need to be addressed prior to an operational mission

Civil mini-RPA's for the 1980's: Avionics design considerations. [remotely piloted vehicles

Science.gov (United States)

Karmarkar, J. S.

1975-01-01

A number of remote sensing or surveillance tasks (e.g., fire fighting, crop monitoring) in the civilian sector of our society may be performed in a cost effective manner by use of small remotely piloted aircraft (RPA). This study was conducted to determine equipment (and the associated technology) that is available, and that could be applied to the mini-RPA and to examine the potential applications of the mini-RPA with special emphasis on the wild fire surveillance mission. The operational considerations of using the mini-RPA as affected by government regulatory agencies were investigated. These led to equipment requirements (e.g., infra-red sensors) over and above those for the performance of the mission. A computer technology survey and forecast was performed. Key subsystems were identified, and a distributed microcomputer configuration, that was functionally modular, was recommended. Areas for further NASA research and development activity were also identified.

The Education and Training of Learning Technologists: A Competences Approach (Report to IEEE Technical Committee on Learning Technologies)

Science.gov (United States)

Hartley, Roger; Kinshuk; Koper, Rob; Okamoto, Toshio; Spector, J. Michael

2010-01-01

The educational and training requirements of Advanced Learning Technology (ALT) need to engage with curricula that reflect the varied requirements of the workplace and of society. Students have a range of interests and ambitions in ALT which the instructional process has to accommodate and support. With these considerations in mind the IEEE…

Technological aspects in synthesis and characterization of proton conducting polyetheretherketone (PEEK) membranes for fuel cell applications.

CSIR Research Space (South Africa)

Vaivars, G

2009-08-01

Full Text Available The research on ion-exchange membranes has grown considerably in recent years with the growing interest in fuel cell technology for the automotive and portable applications. The requirements for a fuel cell membrane are the following: high chemical...

40 CFR 258.3 - Consideration of other Federal laws.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Consideration of other Federal laws... CRITERIA FOR MUNICIPAL SOLID WASTE LANDFILLS General § 258.3 Consideration of other Federal laws. The owner... rules, laws, regulations, or other requirements. ...

Utilizing TOPSIS intensified with adjustment similarity factor to determine price of technology

Directory of Open Access Journals (Sweden)

Seyed Mohammad Seyedhosseini

2012-08-01

Full Text Available Technology transfer has been a very frequent activity in the industrial world nowadays. Technology valuation, and in particular technology pricing, has played a considerable role in these transactions, in spite of a huge amount of limitations in the pricing methodologies applied. Making a sound, traceable and reliable means for applying the price evaluation procedure, seems as a technological requirement to be traced for. The objective of delivering this paper is to introduce a new numerical technology pricing method to provide the two transacting parties a unique compromised price. A three-dimensional model for technology pricing is proposed and The TOPSPS algorithm has been utilized to select the most similar technologies to the intended one and the constructed scoring system is applied to calculate the final technology price accordingly.

Critical Technology Determination for Future Human Space Flight

Science.gov (United States)

Mercer, Carolyn R.; Vangen, Scott D.; Williams-Byrd, Julie A.; Stecklein, Jonette M.; Rahman, Shamim A.; Rosenthal, Matthew E.; Hornyak, David M.; Alexander, Leslie; Korsmeyer, David J.; Tu, Eugene L.;

Economic issues of storage technologies in different applications

International Nuclear Information System (INIS)

Beurskens, L.W.M.; De Noord, M.

2004-09-01

For evaluating energy storage technologies, economical parameters are of considerable importance. A qualitative assessment is given of storage technologies in general, contributing to success or failure of their use. Based on data of nine storage technologies that are defined in the INVESTIRE Network (Investigation on storage technologies for intermittent renewable energies: evaluation and recommended R and D strategy), results of a quantitative cost analysis are presented, based on device-specific key parameters. The costs have been defined as additional costs, effected by the required investments and operation and maintenance expenditures, the efficiency of a device and its lifetime. In order to compare the technologies properly, categories of typical use have been defined, ranging from stand-alone small applications (typical storage capacity of 0.1 kWh) to levelling of power production (approximately 1 MWh). The outcome is presented in such a way that for each category of typical use, the best technological options are identified, based on a cost analysis

Advanced architectures and the required technologies for next-generation communications satellite systems

Science.gov (United States)

Arnold, Ray; Naderi, F. Michael

1988-01-01

The hardware requirements for multibeam operation and onboard data processing and switching on future communication satellites are reviewed. Topics addressed include multiple-beam antennas, frequency-addressable beams, baseband vs IF switching, FDM/TDMA systems, and bulk demodulators. The proposed use of these technologies in the NASA ACTS, Italsat, and the Japanese ETS-VI is discussed in detail and illustrated with extensive diagrams, maps, drawings, and tables of projected performance data.

Future directions of defense programs high-level waste technology programs

International Nuclear Information System (INIS)

Chee, T.C.; Shupe, M.W.; Turner, D.A.; Campbell, M.H.

1987-01-01

The Department of Energy has been managing high-level waste from the production of nuclear materials for defense activities over the last forty years. An objective for the Defense Waste and Transportation Management program is to develop technology which ensures the safe, permanent disposal of all defense radioactive wastes. Technology programs are underway to address the long-term strategy for permanent disposal of high-level waste generated at each Department of Energy site. Technology is being developed for assessing the hazards, environmental impacts, and costs of each long-term disposal alternative for selection and implementation. This paper addresses key technology development areas, and consideration of recent regulatory requirements associated with the long-term management of defense radioactive high-level waste

Socio-Technical Considerations for the Use of Blockchain Technology in Healthcare.

Science.gov (United States)

Wong, Ming Chao; Yee, Kwang Chien; Nøhr, Christian

2018-01-01

Blockchain technology is often considered as the fourth industrial revolution that will change the world. The enthusiasm of the transformative nature of blockchain technology has infiltrated healthcare. Blockchain is often seen as the much needed and perfect technology for healthcare, addressing the difficult and complex issues of security and inter-operability. More importantly, the "value" and trust-based system can deliver automated action and response via its smart contract mechanism. Healthcare, however, is a complex system. Health information technology (HIT) so far, has not delivered its promise of transforming healthcare due to its complex socio-technical and context sensitive interaction. The introduction of blockchain technology will need to consider a whole range of socio-technical issues in order to improve the quality and safety of patient care. This paper presents a discussion on these socio-technical issues. More importantly, this paper argues that in order to achieve the best outcome from blockchain technology, there is a need to consider a clinical transformation from "information" to "value " and trust. This paper argues that urgent research is needed to address these socio-technical issues in order to facilitate best outcomes for blockchain in healthcare. These socio-technical issues must then be further evaluated by means of working prototypes in the medical domain in coming years.

Application of new technologies in surveying. Einsatz von neuen Technologien im Vermessungswesen

Energy Technology Data Exchange (ETDEWEB)

Sperling, D [Rheinisch-Westfaelisches Elektrizitaetswerk AG, Essen (Germany, F.R.). Hauptverwaltung

1990-07-01

The 'tools' of the surveyor have changed considerably in the last few years. New technologies dominate the work scene, but also require many times higher capital expenditure, associated with increased economic risk. Site definition is undertaken from three fields of engineering surveying: Electronic 3D measuring technique, photogrammetric measuring procedure and surveying by satellite. (orig.).

Quality assurance and reference material requirements and considerations for environmental sample analysis in nuclear forensics

International Nuclear Information System (INIS)

Swindle, D.W. Jr.; Perrin, R.E.; Goldberg, S.A.; Cappis, J.

2002-01-01

analyses are to be used in legal proceedings and prosecutions, and also in investigative research. From the legal perspective, one must assume that any results obtained would be used as evidence in a court of law for prosecution of criminal acts. Consequently, Quality Assurance requirements are very demanding and unforgiving. For example, forensics analysis results that cannot be independently verified against certified reference materials of known composition and isotopics, may not be accepted in a court of law as reliable evidence. Thus, the ability to provide certified and traceable reference materials used in the analyses are extremely important in nuclear forensics. In addition to nuclear signatures, other signatures such as any organics or plant and animal residue that are also on the intercepted materials, become important in identifying the origin of the intercepted nuclear material, and will require traceable, known standards. This paper will describe the quality assurance requirements and considerations that must be adopted and developed for application and use in nuclear forensics. Recommendations and minimum requirements for standardization of a nuclear forensics quality assurance program that could be internationally accepted will also be presented. (author)

[Technology transfer to the facility for production of medicines].

Science.gov (United States)

Beregovykh, V V; Spitskiĭ, O P

2013-01-01

Innovation development of pharmaceutical industry is close connected to knowledge transfer going to each subsequent life cycle phase of medicinal product. Formal regulation of technology and knowledge transfer is essential for achievement high quality during production of medicines designed during development phase. Conceptual tools, approaches and requirements are considered that are necessary for knowledge and technology transfer across all the life cycle phases of medicines. They are based on scientific knowledge of medicinal products and take into account both international and Russian regulations in the area of development, production and distribution of medicines. Importance of taking into consideration all aspects related to quality of medicines in all steps of technology transfer is shown. An approach is described for technology transfer organization for Russian pharmaceutical manufacturers based on international guides in this area.

Genome technologies and personalized dental medicine.

Science.gov (United States)

Eng, G; Chen, A; Vess, T; Ginsburg, G S

2012-04-01

The addition of genomic information to our understanding of oral disease is driving important changes in oral health care. It is anticipated that genome-derived information will promote a deeper understanding of disease etiology and permit earlier diagnosis, allowing for preventative measures prior to disease onset rather than treatment that attempts to repair the diseased state. Advances in genome technologies have fueled expectations for this proactive healthcare approach. Application of genomic testing is expanding and has already begun to find its way into the practice of clinical dentistry. To take full advantage of the information and technologies currently available, it is vital that dental care providers, consumers, and policymakers be aware of genomic approaches to understanding of oral diseases and the application of genomic testing to disease diagnosis and treatment. Ethical, legal, clinical, and educational initiatives are also required to responsibly incorporate genomic information into the practice of dentistry. This article provides an overview of the application of genomic technologies to oral health care and introduces issues that require consideration if we are to realize the full potential of genomics to enable the practice of personalized dental medicine. © 2011 John Wiley & Sons A/S.

Human factors assessments of D and D technologies

International Nuclear Information System (INIS)

Carpenter, C.P.; Evans, T.T.; McCabe, B.

2000-01-01

On April 2, 1997, the US Secretary of Energy directed the US Assistant Secretary of Environmental Management and of Safety and Health to require field input of appropriate data to ensure that safety and health considerations were properly addressed in the Accelerating Cleanup: Focus on 2006 Plan. The US Department of Energy (DOE) field managers have committed to the Secretary that they will fully implement integrated safety management systems (ISMSs) at their respective sites by the end of fiscal year 1999. The Secretary has further directed that headquarters safety and health guidance be developed to support consistent and comprehensive project baseline summaries from the field. The Secretary has committed to institutionalizing ISMS as an integral component of the way the DOE conducts its business. The Defense Nuclear Facilities Safety Board continues to oversee and closely monitor the DOE's commitment to the safety and health of its workers. The DOE is committed to a management system approach to ensure that work is performed in a manner that protects the worker, public, and environment. The Deactivation and Decommissioning Focus Area (DDFA) is actively addressing the need to incorporate environmental safety and health (ES and H) considerations in developing technologies. The DDFA is partnered with the Operating Engineers National Hazmat Program (OENHP) to evaluate the ES and H considerations of the innovative and improved decontamination and decommissioning technologies. Part of the implementation of the ES and H work practices in the field is through a cooperative agreement between the National Energy Technology Laboratory (NETL) and the OENHP. The objective of this program is to establish an International Environmental Technology and Training Center to conduct human factors assessments and protocols on environmental technologies. The intent of the human factors assessments is to enhance the effectiveness and efficiency of the technologies and to enhance

MO-E-BRC-00: Online Adaptive Radiotherapy - Considerations for Practical Clinical Implementation

International Nuclear Information System (INIS)

2016-01-01

Online adaptive radiation therapy has the potential to ensure delivery of optimal treatment to the patient by accounting for anatomical and potentially functional changes that occur from one fraction to the next and over the course of treatment. While on-line adaptive RT (ART) has been a topic of many publications, discussions, and research, it has until very recently remained largely a concept and not a practical implementation. However, recent advances in on-table imaging, use of deformable image registration for contour generation and dose tracking, faster and more efficient plan optimization, as well as fast quality assurance method has enabled the implementation of ART in the clinic in the past couple of years. The introduction of these tools into routine clinical use requires many considerations and progressive knowledge to understand how processes that have historically taken hours/days to complete can now be done in less than 30 minutes. This session will discuss considerations to perform real time contouring, planning and patient specific QA, as well as a practical workflow and the required resources. Learning Objectives: To understand the difficulties, challenges and available technologies for online adaptive RT. To understand how to implement online adaptive therapy in a clinical environment and to understand the workflow and resources required. To understand the limitations and sources of uncertainty in the online adaptive process I have research funding from ViewRay Inc. and Philips Medical Systems.; R. Kashani, I have research funding from ViewRay Inc. and Philips Medical Systems.; X. Li, Research supported by Elekta Inc.

MO-E-BRC-00: Online Adaptive Radiotherapy - Considerations for Practical Clinical Implementation

Energy Technology Data Exchange (ETDEWEB)

NONE

2016-06-15

Online adaptive radiation therapy has the potential to ensure delivery of optimal treatment to the patient by accounting for anatomical and potentially functional changes that occur from one fraction to the next and over the course of treatment. While on-line adaptive RT (ART) has been a topic of many publications, discussions, and research, it has until very recently remained largely a concept and not a practical implementation. However, recent advances in on-table imaging, use of deformable image registration for contour generation and dose tracking, faster and more efficient plan optimization, as well as fast quality assurance method has enabled the implementation of ART in the clinic in the past couple of years. The introduction of these tools into routine clinical use requires many considerations and progressive knowledge to understand how processes that have historically taken hours/days to complete can now be done in less than 30 minutes. This session will discuss considerations to perform real time contouring, planning and patient specific QA, as well as a practical workflow and the required resources. Learning Objectives: To understand the difficulties, challenges and available technologies for online adaptive RT. To understand how to implement online adaptive therapy in a clinical environment and to understand the workflow and resources required. To understand the limitations and sources of uncertainty in the online adaptive process I have research funding from ViewRay Inc. and Philips Medical Systems.; R. Kashani, I have research funding from ViewRay Inc. and Philips Medical Systems.; X. Li, Research supported by Elekta Inc.

Manufacturing considerations for AMLCD cockpit displays

Science.gov (United States)

Luo, Fang-Chen

1995-06-01

AMLCD cockpit displays need to meet more stringent requirements compared with AMLCD commercial displays in areas such as environmental conditions, optical performance and device reliability. Special considerations are required for the manufacturing of AMLCD cockpit displays in each process step to address these issues. Some examples are: UV stable polarizers, wide-temperature LC material, strong LC glue seal, ESS test system, gray scale voltage EEPROM, etc.

Thermal Treatment of Hydrocarbon-Impacted Soils: A Review of Technology Innovation for Sustainable Remediation

Directory of Open Access Journals (Sweden)

Julia E. Vidonish

2016-12-01

Full Text Available Thermal treatment technologies hold an important niche in the remediation of hydrocarbon-contaminated soils and sediments due to their ability to quickly and reliably meet cleanup standards. However, sustained high temperature can be energy intensive and can damage soil properties. Despite the broad applicability and prevalence of thermal remediation, little work has been done to improve the environmental compatibility and sustainability of these technologies. We review several common thermal treatment technologies for hydrocarbon-contaminated soils, assess their potential environmental impacts, and propose frameworks for sustainable and low-impact deployment based on a holistic consideration of energy and water requirements, ecosystem ecology, and soil science. There is no universally appropriate thermal treatment technology. Rather, the appropriate choice depends on the contamination scenario (including the type of hydrocarbons present and on site-specific considerations such as soil properties, water availability, and the heat sensitivity of contaminated soils. Overall, the convergence of treatment process engineering with soil science, ecosystem ecology, and plant biology research is essential to fill critical knowledge gaps and improve both the removal efficiency and sustainability of thermal technologies.

48 CFR 32.005 - Consideration for contract financing.

Science.gov (United States)

2010-10-01

... financing. 32.005 Section 32.005 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS CONTRACT FINANCING 32.005 Consideration for contract financing. (a) Requirement. When a contract financing clause is included at the inception of a contract, there shall be no...

Circulating Tumor Cell Analysis: Technical and Statistical Considerations for Application to the Clinic

Directory of Open Access Journals (Sweden)

Alison L. Allan

2010-01-01

Full Text Available Solid cancers are a leading cause of death worldwide, primarily due to the failure of effective clinical detection and treatment of metastatic disease in distant sites. There is growing evidence that the presence of circulating tumor cells (CTCs in the blood of cancer patients may be an important indicator of the potential for metastatic disease and poor prognosis. Technological advances have now facilitated the enumeration and characterization of CTCs using methods such as PCR, flow cytometry, image-based immunologic approaches, immunomagnetic techniques, and microchip technology. However, the rare nature of these cells requires that very sensitive and robust detection/enumeration methods be developed and validated in order to implement CTC analysis for widespread use in the clinic. This review will focus on the important technical and statistical considerations that must be taken into account when designing and implementing CTC assays, as well as the subsequent interpretation of these results for the purposes of clinical decision making.

Inventory extension considerations for long-term storage at the nuclear materials storage facility

International Nuclear Information System (INIS)

Olinger, C.T.; Stanbro, W.D.; Longmire, V.; Argo, P.E.; Nielson, S.M.

1996-01-01

Los Alamos National Laboratory is in the process of modifying its nuclear materials storage facility to a long-term storage configuration. In support of this effort, we examined technical and administrative means to extend periods between physical inventories. Both the frequency and sample size during a physical inventory could significantly impact required sizing of the non-destructive assay (NDA) laboratory as well as material handling capabilities. Several options are being considered, including (1) treating each storage location as a separate vault, (2) minimizing the number of items returned for quantitative analysis by optimizing the use of in situ confirmatory measurements, and (3) utilizing advanced monitoring technologies. Careful consideration of these parameters should allow us to achieve and demonstrate safe and secure storage while minimizing the impact on facility operations and without having to increase the size of the NDA laboratory beyond that required for anticipated shipping and receiving activities

Nuclear technologies

International Nuclear Information System (INIS)

Toyama, Makoto; Hamasaki, Manabu; Kobayashi, Masahiko; Hoshide, Akihiko; Katayama, Kimio; Nozawa, H.; Karigome, Satoshi

2010-01-01

In recent days, energy security is becoming a major global concern and it has been recognized that a major reduction in greenhouse-gas emissions is required to combat climate change. Considerable expansion and new introduction of nuclear power generation are currently being planned and considered for the further in various parts of the world. Nuclear technologies of the latest 10 years in Japan were reviewed with their characteristics, advancement and future perspective. Steady efforts have been made to construct new nuclear power stations with computer-aided engineering system and modular and prefabricated structures, extend the interval of periodic inspections under the new inspection system that should improve both safety and reliability, implement advanced measures against aging and develop the next-generation light water reactors including a medium small reactor. Export of nuclear power plants has been promoted with international business alliance or cooperation. Activities to close nuclear fuel cycle to ensure sustainable nuclear energy utilization have been promoted. Decommissioning technologies for Tokai power station have been developed and accumulated know-how will be utilized in light water reactors. (T. Tanaka)

Technological and engineering challenges of fusion

International Nuclear Information System (INIS)

Maisonnier, David; Hayward, Jim

2008-01-01

The current fusion development scenario in Europe assumes the sequential achievement of key milestones. Firstly, the qualification of the DEMO/reactor physics basis in ITER, secondly, the qualification of materials for in-vessel components in IFMIF and, thirdly, the qualification of components and processes in DEMO. Although this scenario is constrained by budgetary considerations, it assumes the resolution of many challenges in physics, technology and engineering. In the first part of the paper, the technological and engineering challenges to be met in order to satisfy the current development scenario will be highlighted. These challenges will be met by an appropriate share of the work between ITER, IFMIF, DEMO and the necessary accompanying programme, which will have to include a number of dedicated facilities (e.g. for the development of H and CD systems). In the second part of the paper, the consequences of a considerable acceleration of the fusion development programme will be discussed. Although most of the technological and engineering challenges identified above will have to be met within a shorter timescale, it is possible to limit the requirements and expectation for a first fusion power plant with respect to those adopted for the current fusion development scenario. However, it must be recognised that such a strategy will inevitably result in increased risk and a reduction in the economy of the plant. (author)

One recommendation of nuclear power export. GDP model application to the countries which expressed nuclear power introduction and consideration

International Nuclear Information System (INIS)

Iida, Tekehiko

2010-01-01

South Korea has been excited in nuclear business after the success in the contract to build nuclear power plants in UAE. Since more than 60 countries expressed nuclear power introduction and new countries were on the rise with exporting reactor technology accumulated, new era over nuclear renaissance seems to begin. This article at first classified countries, which expressed nuclear power introduction, with an economic level of GDP per capita. Then each classified country's requirements of nuclear power introduction were taken into consideration such as economic development, consumption pattern and technology attitude. As a result recommendation of nuclear power export was proposed. Different approach to each country targeted was suggested as shown in 'nuclear power GDP model'. (T. Tanaka)

Second annual clean coal technology conference: Proceedings

International Nuclear Information System (INIS)

1993-01-01

The Second Annual Clean Coal Technology Conference was held at Atlanta, Georgia, September 7--9, 1993. The Conference, cosponsored by the US Department of Energy (USDOE) and the Southern States Energy Board (SSEB), seeks to examine the status and role of the Clean Coal Technology Demonstration Program (CCTDP) and its projects. The Program is reviewed within the larger context of environmental needs, sustained economic growth, world markets, user performance requirements and supplier commercialization activities. This will be accomplished through in-depth review and discussion of factors affecting domestic and international markets for clean coal technology, the environmental considerations in commercial deployment, the current status of projects, and the timing and effectiveness of transfer of data from these projects to potential users, suppliers, financing entities, regulators, the interested environmental community and the public. Individual papers have been entered separately

Digital libraries philosophies, technical design considerations, and example scenarios

CERN Document Server

Stern, David

1999-01-01

An unparalleled overview of current design considerations for your digital library! Digital Libraries: Philosophies, Technical Design Considerations, and Example Scenarios is a balanced overview of public services, collection development, administration, and systems support, for digital libraries, with advice on adopting the latest technologies that appear on the scene. As a professional in the library and information science field, you will benefit from this special issue that serves as an overview of selected directions, trends, possibilities, limitations, enhancements, design principals, an

The technology and the limits of increase

International Nuclear Information System (INIS)

Schulten, R.

1994-01-01

The future world needs a suitable living standard, above all, for the people in the poor countries. This means an increasing use of raw materials, energy and a stricter environmental technology. The technology can make its own contribution. Beside methods of recycling and substitution of material the increasing raw material use requires more energy and stricter avoiding of environmental damage. The today's fossil energy resources are running down and, due to environmental damage, they only can be used restrictedly. For the future there remains solar energy and nuclear energy. Both types of energy are needed. The tasks are to diminish the expense for the solar energy considerably and to introduce a catastrophe-free nuclear technology. For environmental protection a technology in closed cycles has to be applied. It is not necessary that the future of mankind will lead to a dead end. The future task is to solve these problems with caution, discipline and intelligence. (orig.) [de

Hearing the way: requirements and preferences for technology-supported navigation aids.

Science.gov (United States)

Lewis, Laura; Sharples, Sarah; Chandler, Ed; Worsfold, John

2015-05-01

Many systems have been developed to assist wayfinding for people with sight problems. There is a need for user requirements for such systems to be defined. This paper presents a study which aimed to determine such user requirements. An experiment was also conducted to establish the best way of guiding users between locations. The focus group results indicated that users require systems to provide them with information about their surroundings, to guide them along their route and to provide progress information. They also showed that users with sight conditions interact with systems differently to sighted users, thereby highlighting the importance of designing systems for the needs of these users. Results of the experiment found that the preferred method of guiding users was a notification when they were both on and off track. However, performance was best when only provided with the off track notification, implying that this cue is particularly important. Technology has the potential to support navigation for people with sight problems. Users should have control over cues provided and for these cues should supplement environmental cues rather than replacing them. Copyright © 2015. Published by Elsevier Ltd.

Environmental compliance considerations for the management of cultural resources

International Nuclear Information System (INIS)

Curtis, S.A.; Whitfield, S.; McGinnis, K.

1987-01-01

This paper examines three key considerations underlying the programmatic management of cultural resources that may be affected by a large federal project. These considerations are statutory background and the compliance process, cultural resource compliance tasks, and quality assurance. The first consideration addresses the legal requirements and steps that must be met and taken for federal agencies to fulfill their cultural resource compliance responsibilities. The second consideration focuses on the tasks that must be performed by technical specialists to facilitate related federal and state compliance actions. The third consideration ensures that compliance requirements are being properly fulfilled. In the technical literature and compliance planning, archaeological and historic sites and Native American cultural resources are grouped under the general heading of cultural resources. Also included under this heading are the traditions and resources of Folk societies. Cultural resources encompass both material and nonmaterial aspects of our cultural heritage and include buildings, structures, objects, sites, districts, archaeological resources, places of religious importance, and unique, distinctive, or unusual lifeways. For compliance purposes, it is useful to treat these resources within four roughly chronological culture-historical periods: prehistoric, ethnohistoric, historic, and contemporary. 6 refs., 6 tabs

Telecommuting: Occupational health considerations for employee health and safety.

Science.gov (United States)

Healy, M L

2000-06-01

1. Information technology has moved "work" out of a centralized location. Employees who telecommute pose significant challenges and considerations for the practice of occupational health nursing. 2. Employer and employee benefits associated with telecommuting are reportedly associated with high levels of job satisfaction. However, the occupational health and safety risks of this new work environment need to be fully assessed and understood. 3. The ergonomic controls to minimize the risk of repetitive motion injuries are the same for both office and home locations. Additional attention need to be paid to implementing risk controls for other physical hazards and psychosocial considerations, as well as personal safety and security issues. 4. The scope of occupational health nursing practice needs to remain dynamic, recognizing the impact new technologies have on the workplace, to continue to meet the needs of the changing workplace.

Scale-up considerations relevant to experimental studies of nuclear waste-package behavior

International Nuclear Information System (INIS)

Coles, D.G.; Peters, R.D.

1986-04-01

Results from a study that investigated whether testing large-scale nuclear waste-package assemblages was technically warranted are reported. It was recognized that the majority of the investigations for predicting waste-package performance to date have relied primarily on laboratory-scale experimentation. However, methods for the successful extrapolation of the results from such experiments, both geometrically and over time, to actual repository conditions have not been well defined. Because a well-developed scaling technology exists in the chemical-engineering discipline, it was presupposed that much of this technology could be applicable to the prediction of waste-package performance. A review of existing literature documented numerous examples where a consideration of scaling technology was important. It was concluded that much of the existing scale-up technology is applicable to the prediction of waste-package performance for both size and time extrapolations and that conducting scale-up studies may be technically merited. However, the applicability for investigating the complex chemical interactions needs further development. It was recognized that the complexity of the system, and the long time periods involved, renders a completely theoretical approach to performance prediction almost hopeless. However, a theoretical and experimental study was defined for investigating heat and fluid flow. It was concluded that conducting scale-up modeling and experimentation for waste-package performance predictions is possible using existing technology. A sequential series of scaling studies, both theoretical and experimental, will be required to formulate size and time extrapolations of waste-package performance

Design considerations for on-site spent-fuel transfer systems

International Nuclear Information System (INIS)

Jones, R.H.; Jones, C.R.

1989-06-01

Studies on spent fuel shipping logistics and operation make it clear that the use of large casks, i.e., 100--125 tons, is superior to smaller casks of similar construction. This superiority manifests itself in both transportation and/or shipping economics and safety as well as reduced personnel exposure in the processing of the casks. An on-site system for the transfer of spent fuel from the storage pool to a large shipping or storage cask, as well as the transfer of spent fuel directly from a storage cask to a shipping cask, could bring the large cask benefits to those restricted reactors. Sensing the need to look more closely at this opportunity, EPRI contracted with S. Levy, Incorporated of Campbell, CA to develop a set of design considerations for such transfer systems. Rather then embark on another design study, EPRI decided to first identify the system considerations that must be factored into any design. The format for this effort presents both the Consideration and the Rationale for the consideration. The resulting work identified thirty-six General Considerations and two Special Considerations. The Considerations are in the form of mandatory requirements and desirable but nonmandatory requirements. Additionally, a brief economic study was performed to get a feel for the cost considerations of on-site transfers. The study results suggest a relatively narrow set of scenarios where on-site transfers are economically superior to alternatives. These scenarios generally involve the use of concrete casks as on-site storage devices

Magna-field irradiation: physical considerations

Energy Technology Data Exchange (ETDEWEB)

Van Dyk, J.

1983-12-01

Magna-field radiotherapy in the form of total body, half body and total nodal irradiation is becoming increasingly prominent and involves dosimetric problems that are much more pronounced than they are for conventional field sizes. In this review of the physical considerations of magna-field irradiation, a number of possible alternate methods of producing large radiation fields are outlined, the basic beam dosimetry is reviewed and the factors producing dose variation in the patient are considered. Since the lung contains large regions of low density tissues and has a lower tolerance to radiaiton than most other tissues, special consideration is given to methods of dose determination and dose reduction to this organ. The question of accuracy in dose delivery is briefly discussed and the concept of delivering a radiation dose 'as precisely as readily achievable (APARA), technological and biological factors being taken into account' is introduced.

Combining people, processes, and technology.

Science.gov (United States)

Fishman, Julia

2017-06-01

Julia Fishman, managing director and vice-President, Clinical Strategy, at TeleTracking Technologies, discusses the in-use benefits of patient, staff, and asset tracking and flow technologies, arguing that their effective deployment across an NHS under considerable pressure on many fronts can free up more time to care, bring considerable cost and wider efficiencies, and help to address the perennial issue of 'bed blocking'.

Current USAEC seismic requirements for nuclear power plants

International Nuclear Information System (INIS)

Mehta, D.S.

1975-01-01

The principal seismic and geologic considerations which guide the USAEC in its evaluation of the suitability of proposed sites for nuclear power plants and plant design bases are set forth as design criteria in the AEC regulatory guides. The basic requirements of seismic design and analysis for seismic Category I structures, components, and systems important to public safety have been established in the USAEC regulatory guides and Code of Federal Regulations. It is pointed out that the current state-of-art techniques, best available technology, and additional studies in the field of earthquake engineering can be utilized to resolve seismic concerns. The seismic design requirements for nuclear plants to withstand postulated earthquakes can be standardized and this will be a significant milestone in the continuation of the Nuclear Standardization Program. (author)

Financing biotechnology projects: lender due diligence requirements and the role of independent technical consultants.

Science.gov (United States)

Keller, J B; Plath, P B

1999-01-01

An increasing number of biotechnology projects are being brought to commercialization using conventional structured finance sources, which have traditionally only been available to proven technologies and primary industries. Attracting and securing competitive cost financing from mainstream lenders, however, will require the sponsor of a new technology or process to undergo a greater level of due diligence. The specific areas and intensity of investigation, which are typically required by lenders in order to secure long-term financing for biotechnology-based manufacturing systems, is reviewed. The processes for evaluating the adequacy of prior laboratory testing and pilot plant demonstrations is discussed. Particular emphasis is given to scale-up considerations and the ability of the proposed facility design to accommodate significant modifications, in the event that scale-up problems are encountered.

Current Requirements of the Society to the Professional Training of Specialists in Information Technology Industry in Japan

Science.gov (United States)

Pododimenko, Inna

2014-01-01

The problem of professional training of skilled human personnel in the industry of information communication technology, the urgency of which is recognized at the state level of Ukraine and the world, has been considered. It has been traced that constantly growing requirements of the labour market, swift scientific progress require the use of…

Bridging the Gap: Technology Trends and Use of Technology in Schools

Science.gov (United States)

Lim, Cher Ping; Zhao, Yong; Tondeur, Jo; Chai, Ching Sing; Tsai, Chin-Chung

2013-01-01

Considerable investment has been made to bring technology to schools and these investments have indeed resulted in many "success stories." However there are two significant gaps in educational uses of technology that must be addressed. The first is a usage gap. Compared to how and how much today's students use technology outside…

Optical Manufacturing and Testing Requirements Identified by the NASA Science Instruments, Observatories and Sensor Systems Technology Assessment

Science.gov (United States)

Stahl, H. Philip; Barney, Rich; Bauman, Jill; Feinberg, Lee; Mcleese, Dan; Singh, Upendra

2011-01-01

In August 2010, the NASA Office of Chief Technologist (OCT) commissioned an assessment of 15 different technology areas of importance to the future of NASA. Technology assessment #8 (TA8) was Science Instruments, Observatories and Sensor Systems (SIOSS). SIOSS assess the needs for optical technology ranging from detectors to lasers, x-ray mirrors to microwave antenna, in-situ spectrographs for on-surface planetary sample characterization to large space telescopes. The needs assessment looked across the entirety of NASA and not just the Science Mission Directorate. This paper reviews the optical manufacturing and testing technologies identified by SIOSS which require development in order to enable future NASA high priority missions.

CCT deployment considerations

International Nuclear Information System (INIS)

Yamagata, B.

1993-01-01

The deployment of Clean Coal Technologies (CCT) is discussed by asserting that in the case of commercializing CCT, the government's involvement should not stop at the demonstration gate. Two areas in this regard are described. First, the need for the domestic DOE CCT Program to focus on the domestic deployment of demonstrated technologies, and second, the need to recognize that to participate in the phenomenal growth of international power markets through use of clean coal or advanced coal technologies an aggressive partnering between the government and industry to demonstrate technologies abroad will be required. The Clean Coal Technology Coalition's (CCT) primary mission has been to promote the development and use of CCTs. The CCT is a strong advocate for the DOE CCT Program and applauds the Department's and industry's success at developing many coal-based technologies. By current design, the DOE program is said to go no further than the initial demonstration of a technology. Since the inception of CCT in 1986, the Coalition has advocated the need to pursue a partnership with government in which more than one demonstration of the same or similar technology is supported by the clean coal program. Only in this way can one be assured of widespread acceptance of any given technology. There exists a gap (call it a open-quotes risk gapclose quotes) between CCTs that have been successfully demonstrated (and presumably available for commercial use) and their widespread commercial use. A technology matrix has been developed in which the developmental status of a variety of clean coal technologies is demonstrated. While still too early to pass judgment, it appears that while success is being achieved in demonstrating advanced coal technologies, the market place - for several reasons - is not, indeed may have no plans, to adopt these technologies

Finnish energy technology programmes 1998

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-01

The Finnish Technology Development Centre (Tekes) is responsible for the financing of research and development in the field of energy production technology. A considerable part of the financing goes to technology programmes. Each technology programme involves major Finnish institutions - companies, research institutes, universities and other relevant interests. Many of the energy technology programmes running in 1998 were launched collectively in 1993 and will be completed at the end of 1998. They are complemented by a number of other energy-related technology programmes, each with a timetable of its own. Because energy production technology is horizontal by nature, it is closely connected with research and development in other fields, too, and is an important aspect in several other Tekes technology programmes. For this reason this brochure also presents technology programmes where energy is only one of the aspects considered but which nevertheless contribute considerably to research and development in the energy production sector

Aquatek introduces new oily water technology

International Nuclear Information System (INIS)

Anon.

2006-01-01

Many conventional oily water separators cause clogged filters on marine vessels, which has led some operators to illegally discharge oily wastes into lakes and oceans. This article presented details of a simple and reliable technology to separate chemically emulsified and mechanically suspended oil particles from water. Designed by Newfoundland entrepreneurs and commercialized by Aquatek Environmental Inc., the Aquatek separator does not require membranes or chemicals and can be configured to function without moving parts or external energy. The small size of the separator has made it the subject of considerable interest at marine technology shows. The technology is able to treat highly variable concentrations of oily water without clogging, and works on low oil concentrations as well as fluids consisting of all-free oil. The Aquatek has the ability to separate oil from water as well as water from oil. Tests have indicated that the technology can also be used to treat produced water at oilfields. It was concluded that the separator is a major improvement over other available products. 2 figs

New Technologies for Surgery of the Congenital Cardiac Defect

Directory of Open Access Journals (Sweden)

David Kalfa

2013-07-01

Full Text Available The surgical repair of complex congenital heart defects frequently requires additional tissue in various forms, such as patches, conduits, and valves. These devices often require replacement over a patient’s lifetime because of degeneration, calcification, or lack of growth. The main new technologies in congenital cardiac surgery aim at, on the one hand, avoiding such reoperations and, on the other hand, improving long-term outcomes of devices used to repair or replace diseased structural malformations. These technologies are: 1 new patches: CorMatrix® patches made of decellularized porcine small intestinal submucosa extracellular matrix; 2 new devices: the Melody® valve (for percutaneous pulmonary valve implantation and tissue-engineered valved conduits (either decellularized scaffolds or polymeric scaffolds; and 3 new emerging fields, such as antenatal corrective cardiac surgery or robotically assisted congenital cardiac surgical procedures. These new technologies for structural malformation surgery are still in their infancy but certainly present great promise for the future. But the translation of these emerging technologies to routine health care and public health policy will also largely depend on economic considerations, value judgments, and political factors.

The iPad and mobile technology revolution: benefits and challenges for individuals who require augmentative and alternative communication.

Science.gov (United States)

McNaughton, David; Light, Janice

2013-06-01

The iPad and other mobile technologies provide powerful new tools to potentially enhance communication for individuals with developmental disabilities, acquired neurogenic disorders, and degenerative neurological conditions. These mobile technologies offer a number of potential benefits, including: (a) increased awareness and social acceptance of augmentative and alternative communication (AAC), (b) greater consumer empowerment in accessing AAC solutions, (c) increased adoption of AAC technologies, (d) greater functionality and interconnectivity, and (e) greater diffusion of AAC research and development. However, there remain a number of significant challenges that must be addressed if these benefits are to be fully realized: (a) to ensure the focus is on communication, not just technology, (b) to develop innovative models of AAC service delivery to ensure successful outcomes, (c) to ensure ease of access for all individuals who require AAC, and, (d) to maximize AAC solutions to support a wide variety of communication functions. There is an urgent need for effective collaboration among key stakeholders to support research and development activities, and to ensure the successful implementation of mobile technologies to enhance communication outcomes for individuals who require AAC and their families.

The application of metal cutting technologies in tasks performed in radioactive environments

International Nuclear Information System (INIS)

Fogle, R.F.; Younkins, R.M.

1997-01-01

The design and use of equipment to perform work in radioactive environments is uniquely challenging. Some tasks require that the equipment be operated by a person wearing a plastic suit or full face respirator and donning several pairs of rubber gloves. Other applications may require that the equipment be remotely controlled. Other important, design considerations include material compatibility, mixed waste issues, tolerance to ionizing radiation, size constraints and weight capacities. As always, there is the ''We need it ASAP'' design criteria. This paper describes four applications where different types of metal cutting technologies were used to successfully perform tasks in radioactive environments. The technologies include a plasma cutting torch, a grinder with an abrasive disk, a hydraulic shear, and a high pressure abrasive water jet cutter

Anthropometric Considerations in the Modernized Main Control Room: Application to a Virtual Nuclear Power Plant Control Panel

International Nuclear Information System (INIS)

Yang, Chih Wei; Cheng, Tsung Chieh; Lin, Chiuhsiang Joe

2011-01-01

This study investigates the anthropometric considerations in the main control room (MCR) application to a virtual nuclear power plant (NPP) control panel. Influences of working postures and physical demands on the operational performance are also discussed. Finally, the present research provides a case example to illustrate the influences of anthropometric considerations on the control panel design for MCR operators by applying virtual reality (VR) technology. The MCR design primarily evolved in different countries. The datasets available is usually insufficient or inconsistent for the end users. To solve the upper mentioned problem, this study put emphasis on applying VR technology to anthropometric considerations support control panel design in the modernized MCR. Although the concept of applying VR technology on anthropometric considerations in this paper is related to the MCR in NPPs, it could be easily applied for the purposes of any type of control room in a similar manner

Anthropometric Considerations in the Modernized Main Control Room: Application to a Virtual Nuclear Power Plant Control Panel

Energy Technology Data Exchange (ETDEWEB)

Yang, Chih Wei; Cheng, Tsung Chieh [Institute of Nuclear Energy Research, Taoyuan (China); Lin, Chiuhsiang Joe [Chung-Yuan Christian University, Chung Li (China)

2011-08-15

This study investigates the anthropometric considerations in the main control room (MCR) application to a virtual nuclear power plant (NPP) control panel. Influences of working postures and physical demands on the operational performance are also discussed. Finally, the present research provides a case example to illustrate the influences of anthropometric considerations on the control panel design for MCR operators by applying virtual reality (VR) technology. The MCR design primarily evolved in different countries. The datasets available is usually insufficient or inconsistent for the end users. To solve the upper mentioned problem, this study put emphasis on applying VR technology to anthropometric considerations support control panel design in the modernized MCR. Although the concept of applying VR technology on anthropometric considerations in this paper is related to the MCR in NPPs, it could be easily applied for the purposes of any type of control room in a similar manner.

Considerations on technology transfer process in nuclear power industry for developing countries

International Nuclear Information System (INIS)

Castro, I.P.

2000-01-01

Nuclear know-how cannot possibly be developed globally in developing countries, so technology transfer is the only conceivable way to make nuclear power accessible to these countries. Technology transfer process accounts for three mayor steps, namely acquisition, assimilation and diffusion, so a serious nuclear power program should comprise all of them. Substantial national efforts should be made by developing countries in financial, industrial, scientific, organizational and many other aspects in order to succeed a profitable technology transfer, but developing countries cannot make it by themselves. Finance is the biggest problem for developing world nuclear power projects. Human resource qualification is another important aspect of the nuclear power technology transfer, where technology receptor countries should prepare thousands of professionals in domestic and foreign schools. Challenge for nuclear power deployment is economical, but also social and political. Developed countries should be open to cooperate with developing countries in meeting their needs for nuclear power deployment that should be stimulated and coordinated by an international body which should serve as mediator for nuclear power technology transfer. This process must be carried out on the basis of mutual benefits, in which the developed world can exploit the fast growing market of energy in the developing world, but with the necessary condition of the previous preparation of our countries for this technology transfer. (author)

Requirements, needs, and concepts for a new broad-application test reactor

International Nuclear Information System (INIS)

Ryskamp, J.M.; Fletcher, C.D.; Denison, A.B.; Liebenthal, J.L.

1992-01-01

For a variety of reasons, including (a) the increasing demands of the 1990s regulatory environment, (b) limited existing test capactiy and capability to satisfy projected future testing missions, and (c) an expected increasing need for nuclear information to support development of advanced reactors, there is a need for requirements and preliminary concepts for a new broad-application test reactor (BATR). These requirements must include consideration not only for a broad range of projected testing missions but also for current and projected regulatory compliance and safety requirements. The requirements will form the basis for development and assessment of preconceptual reactor designs and lead to the identification of key technologies to support the government's long-term strategic and programmatic planning. This paper outlines the need for a new BATR and suggests a few preliminary reactor concepts that can meet that need

[Science fiction and the Brave New World: predictions fulfilled in our century and bioethical considerations].

Science.gov (United States)

Santos, Ana Carolina Clemente Dos; Amorim Neto, Thomaz Pereira de; Goes, Andrea Carla de Souza

2013-06-01

The speed with which science generates results in modern society requires reflection on the limits of scientific progress. This is the foundation of Brave New World, a book published by Aldous Huxley in 1932 that portrays a future technological society along the lines of Fordism. This article establishes a relationship between our current technocratic society and that described by Huxley, discussing the viability of the technical and biological aspects of the manipulations narrated in the book in light of current knowledge. Some bioethical considerations with respect to the procedures 'invented' by the author - and which are already or could be developed in modern society - will also be addressed.

Considerations on the US A science and technology politics

International Nuclear Information System (INIS)

Bastos, Wilma S.

1999-01-01

In this work, the evolution of Science and Technology policy in USA is analyzed in its three phases, after the Second World War. The financial policy for Research and Development during the governments Reagan, Bush and Clinton is also delineated and, finally, Latin America situation is exposed in this scenery (author)

Sharing of fusion related technology among third world countries

International Nuclear Information System (INIS)

Lee, S.

1987-01-01

A program to initiate experimental plasma physics in developing countries has been started as a definite step for technology sharing. Cost effectiveness of several devices has been carefully considered from the viewpoint of physical mechanisms and existing technology. From this consideration emerges the plasma focus which whilst requiring no extraordinary technology yet could be packaged into a comprehensive facility for training in plasma production, plasma dynamics, plasma diagnostic and measurement of plasma x-rays, REB and fusion neutrons, with a very wide scope for the establishment of indigeneous training and research. It is shown that the simplicity of the approach is no barrier to the richness of plasma phenomena. Indeed the simplicity allows a clear comparison of pinch devices and, for example, enables two crucial limitations of existing plasma focus devices to be singled out, the overcoming of which could result in a many-fold jump in neutron yield. Hence the need for basic studies of these limitations. These and other studies could just as well be made on small devices. The UNU Training Programme resulted from the above consideration and evolved around the UNU/ICTP PFF, a small plasma focus with interesting physics and cost-effective technology. The extension of future training programmes to cover other important devices, for example, of the FRC type such as the Rotamak could widen the scope of this sharing of plasma and fusion technology. (author) [pt

Comparative Study on Research Reactor Design Requirements between IAEA and Korea

International Nuclear Information System (INIS)

Chang, Won Joon; Yune, Young Gill; Song, Myung Ho; Cho, Seung Ho

2013-01-01

This study has identified the gaps in the safety requirements for design of research reactors of Korea comparing with those of the IAEA. The review results showed that the gaps have arisen mainly from the following aspects: - The differences in the characteristics of design and operation between power reactor and research reactor - Enhancement of the level of safety of nuclear reactor facility - Consideration of advanced safety technologies. The review results will be utilized to reflect the IAEA safety requirements for design of research reactors into those of Korea, which will contribute to enhancing the level of safety and improving the technical standards of research reactors of Korea. The IAEA safety standards encompass international consensus to strengthen the nuclear safety and to reflect the latest advancement of nuclear safety technologies. Also, they provide reliable means to ensure the effective fulfillment of obligations under the various international safety conventions. Many countries have adopted the IAEA safety standards as their national standards in nuclear regulations. Since Korea has exported research reactor technologies abroad these days and will continue to export them in the future, it is desirable to harmonize domestic safety requirements for research reactor with those of the IAEA. The KINS (Korea Institute of Nuclear Safety) has performed a review of the IAEA safety requirements for design of research reactors comparing with those of Korea. The purpose of this comparative study is to harmonize the safety requirements for the design of research reactors of Korea with those of the IAEA as a member state of the IAEA, and to encompass global efforts to enhance the nuclear safety and to reflect the latest advancement of nuclear safety technologies into the safety requirements for the design of research reactors of Korea. Design requirements for structures, systems, and components of research reactors important to safety, which are required to

Advances in commercial ICF technology since 1986

International Nuclear Information System (INIS)

Kulcinski, G.L.

1989-01-01

Progress in the march toward commercial ICF fusion reactors has been uneven in the past few years. Considerable advances have been made in the area of light ion beam fusion through the development of rep ratable drivers (i.e., HERMES-III technology) and diodes (i.e., applied B configuration with renewable Li surfaces). Significant progress in the development of lasers to compress targets has also been made through the KrF Aurura program. The possibility of lowering the cost of glass in the advanced solid state lasers has been given serious consideration. The development of the Induced Spatial Incoherence (ISI) technique to improve the uniformity of the laser beam has allowed physicists and engineers to once again contemplate the use of symmetric illumination. This would reduce the driver energy required to achieve high gains but it also introduces difficulty in the reactor design. Relatively little progress in commercial heavy ion beam drivers has been made over the past few years aside from an indepth study (HIFSA) of the desirable operating regimes to be pursued. Other areas where little progress has been made are conceptual reactor studies, target declassification and specific experimental programs to address commercial ICF reactor technology needs

Personal radiation detector at a high technology readiness level that satisfies DARPA’s SN-13-47 and SIGMA program requirements

International Nuclear Information System (INIS)

Ginzburg, D.; Knafo, Y.; Manor, A.; Seif, R.; Ghelman, M.; Ellenbogen, M.; Pushkarsky, V.; Ifergan, Y.; Semyonov, N.; Wengrowicz, U.; Mazor, T.; Kadmon, Y.; Cohen, Y.; Osovizky, A.

2015-01-01

There is a need to develop new personal radiation detector (PRD) technologies that can be mass produced. On August 2013, DARPA released a request for information (RFI) seeking innovative radiation detection technologies. In addition, on December 2013, a Broad Agency Announcement (BAA) for the SIGMA program was released. The RFI requirements focused on a sensor that should possess three main properties: low cost, high compactness and radioisotope identification capabilities. The identification performances should facilitate the detection of a hidden threat, ranging from special nuclear materials (SNM) to commonly used radiological sources. Subsequently, the BAA presented the specific requirements at an instrument level and provided a comparison between the current market status (state-of-the-art) and the SIGMA program objectives. This work presents an optional alternative for both the detection technology (sensor with communication output and without user interface) for DARPA’s initial RFI and for the PRD required by the SIGMA program. A broad discussion is dedicated to the method proposed to fulfill the program objectives and to the selected alternative that is based on the PDS-GO design and technology. The PDS-GO is the first commercially available PRD that is based on a scintillation crystal optically coupled with a silicon photomultiplier (SiPM), a solid-state light sensor. This work presents the current performance of the instrument and possible future upgrades based on recent technological improvements in the SiPM design. The approach of utilizing the SiPM with a commonly available CsI(Tl) crystal is the key for achieving the program objectives. This approach provides the appropriate performance, low cost, mass production and small dimensions; however, it requires a creative approach to overcome the obstacles of the solid-state detector dark current (noise) and gain stabilization over a wide temperature range. Based on the presented results, we presume that

Personal radiation detector at a high technology readiness level that satisfies DARPA’s SN-13-47 and SIGMA program requirements

Energy Technology Data Exchange (ETDEWEB)

Ginzburg, D., E-mail: dimgiz@rotemi.co.il [Radiation Detection Department, Rotem Industries Ltd. (Israel); Knafo, Y.; Manor, A. [Radiation Detection Department, Rotem Industries Ltd. (Israel); Seif, R.; Ghelman, M. [Electronics & Control Laboratories, Nuclear Research Center, Negev, Beersheba (Israel); Ellenbogen, M.; Pushkarsky, V. [Radiation Detection Department, Rotem Industries Ltd. (Israel); Ifergan, Y. [Electronics & Control Laboratories, Nuclear Research Center, Negev, Beersheba (Israel); Semyonov, N. [Radiation Detection Department, Rotem Industries Ltd. (Israel); Wengrowicz, U.; Mazor, T.; Kadmon, Y.; Cohen, Y. [Electronics & Control Laboratories, Nuclear Research Center, Negev, Beersheba (Israel); Osovizky, A. [Radiation Detection Department, Rotem Industries Ltd. (Israel)

2015-06-01

There is a need to develop new personal radiation detector (PRD) technologies that can be mass produced. On August 2013, DARPA released a request for information (RFI) seeking innovative radiation detection technologies. In addition, on December 2013, a Broad Agency Announcement (BAA) for the SIGMA program was released. The RFI requirements focused on a sensor that should possess three main properties: low cost, high compactness and radioisotope identification capabilities. The identification performances should facilitate the detection of a hidden threat, ranging from special nuclear materials (SNM) to commonly used radiological sources. Subsequently, the BAA presented the specific requirements at an instrument level and provided a comparison between the current market status (state-of-the-art) and the SIGMA program objectives. This work presents an optional alternative for both the detection technology (sensor with communication output and without user interface) for DARPA’s initial RFI and for the PRD required by the SIGMA program. A broad discussion is dedicated to the method proposed to fulfill the program objectives and to the selected alternative that is based on the PDS-GO design and technology. The PDS-GO is the first commercially available PRD that is based on a scintillation crystal optically coupled with a silicon photomultiplier (SiPM), a solid-state light sensor. This work presents the current performance of the instrument and possible future upgrades based on recent technological improvements in the SiPM design. The approach of utilizing the SiPM with a commonly available CsI(Tl) crystal is the key for achieving the program objectives. This approach provides the appropriate performance, low cost, mass production and small dimensions; however, it requires a creative approach to overcome the obstacles of the solid-state detector dark current (noise) and gain stabilization over a wide temperature range. Based on the presented results, we presume that

Considerations in forecasting the demand for carbon sequestration and biotic storage technologies

Energy Technology Data Exchange (ETDEWEB)

Trexler, M.C. [Trexler and Associates, Inc., Portland, OR (United States)

1997-12-31

The Intergovernmental Panel on Climate Change (IPCC) has identified forestry and other land-use based mitigation measures as possible sources and sinks of greenhouse gases. An overview of sequestration and biotic storage is presented, and the potential impacts of the use of carbon sequestration as a mitigation technology are briefly noted. Carbon sequestration is also compare to other mitigation technologies. Biotic mitigation technologies are concluded to be a legitimate and potentially important part of greenhouse gas mitigation due to their relatively low costs, ancillary benefits, and climate impact. However, not all biotic mitigation techniques perfectly match the idealized definition of a mitigation measure, and policies are becoming increasingly biased against biotic technologies.

A cost-benefit analysis of alternatively fueled buses with special considerations for V2G technology

International Nuclear Information System (INIS)

Shirazi, Yosef; Carr, Edward; Knapp, Lauren

2015-01-01

Motivated by climate, health and economic considerations, alternatively-fueled bus fleets have emerged worldwide. Two popular alternatives are compressed natural gas (CNG) and electric vehicles. The latter provides the opportunity to generate revenue through vehicle-to-grid (V2G) services if properly equipped. This analysis conducts a robust accounting of the costs of diesel, CNG and battery-electric powertrains for school buses. Both marginal and fleet-wide scenarios are explored. Results indicate that the marginal addition of neither a small CNG nor a small V2G-enabled electric bus is cost effective at current prices. Contrary to previous findings, a small V2G-enabled electric bus increases net present costs by $7,200/seat relative to diesel for a Philadelphia, PA school district. A small CNG bus increases costs by $1,200/seat relative to diesel. This analysis is the first to quantify and include the economic implications of cold temperature extremes on electric vehicle battery operations, and the lower V2G revenues that result. Additional costs and limitations imposed by electric vehicles performing V2G are frequently overlooked in the literature and are explored here. If a variety of technical, legal, and economic challenges are overcome, a future eBus may be economical. - Highlights: • We present a robust cost-benefit analysis of various bus technologies. • Diesel is a low-cost technology at current prices. • CNG represents slightly higher costs on a marginal bus basis. • V2G-enabled electric buses are not cost-effective at current prices. • We identify frequently overlooked costs and challenges to V2G implementation.

Required grades of hull steel plates in consideration of fracture toughness; Hakai jinsei wo koryoshita sentaiyo koban shiyo kubun ni kansuru ichikosatsu

Energy Technology Data Exchange (ETDEWEB)

Yajima, H; Yamamoto, M; Ogaki, Y [Hiroshima University, Hiroshima (Japan). Faculty of Engineering

1997-10-01

This paper discusses the required grades of hull steel plates based on the steel ship rule of Nippon Kaiji Kyokai (NK). The minimum value of the allowable crack length in NK rule (critical safety crack length at 0degC just before brittle unstable crack causing fatal fracture) was estimated. In the case where the estimated crack tip exists in a matrix, the crack length was a minimum of 200-210mm, while nearly 60mm in a fusion line at high-heat-input welded joint. The allowable crack lengths estimated from a specified value in the NK rule were fairly different. The allowable crack length at 0degC was also estimated from the minimum value in V-notch Charpy impact test. The private proposal on the required grades of hull steel plates in consideration of fracture toughness was discussed. Thirty-five percent of crack lengths found in real ships is 100mm or less, however, cracks of 250-400mm long are frequently found suggesting the allowable crack length of 400mm. The required grade integrally considering required values and design conditions is demanded to secure the reliability of hull strength. 5 refs., 5 figs., 2 tabs.

Emplacement and retrieval equipment design considerations for a repository in salt

International Nuclear Information System (INIS)

Nair, B.R.; Bahorich, R.J.

1987-01-01

The current design concept for the disposal of nuclear high level waste packages in a repository in salt is based on the emplacement of individual packages in vertical boreholes in the underground mine floor. A key requirement is that the waste packages be capable of being retrieved during the last 26 years of the 76-year repository operating period. The unique design considerations relating to the retrieval of waste packages emplaced in bedded salt are presented in this paper. The information is based on the experience developed during the design of vertical emplacement and retrieval equipment in support of the Sandia Defense High Level Waste experiments at the Waste Isolation Pilot Plant. Also included are the impact of retrievability on the design of the equipment, the special salt cutting technology that was developed for this application, and a description of the equipment

Residential/commercial market for energy technologies

Energy Technology Data Exchange (ETDEWEB)

Glesk, M M

1979-08-01

The residential/commercial market sector, particularly as it relates to energy technologies, is described. Buildings account for about 25% of the total energy consumed in the US. Market response to energy technologies is influenced by several considerations. Some considerations discussed are: industry characteristics; market sectors; energy-consumption characeristics; industry forecasts; and market influences. Market acceptance may be slow or nonexistent, the technology may have little impact on energy consumption, and redesign or modification may be necessary to overcome belatedly perceived market barriers. 7 figures, 20 tables.

Considerations for Realizing the Promise of Educational Gaming Technology

Science.gov (United States)

Nelson, Nancy J.; Fien, Hank; Doabler, Christian T.; Clarke, Ben

2016-01-01

One can barely keep up with the pace at which new educational games and apps are being introduced and digested in the market. With so many choices available, how do schools and teachers decide what to use? How do they have confidence their choices will result in desired outcomes? Education technology offers a number of potential benefits that can…

Environmental approvals in New Brunswick : economic considerations

Energy Technology Data Exchange (ETDEWEB)

Marrack, C.; Maitland, R. [Suez Renewable Energy North America, Houston, TX (United States)

2008-07-01

This presentation provided a timeline of economic considerations related to New Brunswick's regulatory approval process for wind power developments. The economics of wind power projects require careful consideration during the initial planning phases, as it is not yet known if projects are viable. Spending in the early stages of a project should therefore be limited to items that focus on components of the environmental impact assessment (EIA) process that include establishing a relationship with First Nations groups in the area, and conducting seasonal bird studies. Economic considerations change when project viability is confirmed, and developers can then progress to conducting traditional knowledge studies and further seasonal bird studies. Baseline information studies should be reviewed, and biophysical surveys should involve the identification of any wetlands, sensitive areas, and rare plants. Archaeology studies are also required by the provincial government, as well as bat studies to determine if the site has a resident population of bats. Public and stakeholder consultations and open houses should then be held with an adequate time-frame for the submission of questions and concerns and the development of mitigation strategies. Project viability should be confirmed before power purchase agreements (PPAs) are signed. After PPAs are signed, the largest economic consideration is the schedule-related risk associated with legal and financial problems. It was concluded that noise impact, visual impact, and socioeconomic assessments and studies can be conducted after the PPA is secured. tabs., figs.

Mars Sample Return: Mars Ascent Vehicle Mission and Technology Requirements

Science.gov (United States)

Bowles, Jeffrey V.; Huynh, Loc C.; Hawke, Veronica M.; Jiang, Xun J.

2013-01-01

A Mars Sample Return mission is the highest priority science mission for the next decade recommended by the recent Decadal Survey of Planetary Science, the key community input process that guides NASAs science missions. A feasibility study was conducted of a potentially simple and low cost approach to Mars Sample Return mission enabled by the use of developing commercial capabilities. Previous studies of MSR have shown that landing an all up sample return mission with a high mass capacity lander is a cost effective approach. The approach proposed is the use of an emerging commercially available capsule to land the launch vehicle system that would return samples to Earth. This paper describes the mission and technology requirements impact on the launch vehicle system design, referred to as the Mars Ascent Vehicle (MAV).

School Security Technologies

Science.gov (United States)

Schneider, Tod

2010-01-01

Over the past decade electronic security technology has evolved from an exotic possibility into an essential safety consideration. Before resorting to high-tech security solutions, school officials should think carefully about the potential for unintended consequences. Technological fixes may be mismatched to the problems being addressed. They can…

A review of digital radiography technology for valve inspection

International Nuclear Information System (INIS)

Stoev, K.; Guerout, F.M.; Horn, D.

2008-01-01

There are thousands of valves in a nuclear power plant (NPP) used for control, safety and checks in various plant systems, so there is a well-identified need for fast and reliable inspection and diagnostics of valves. Digital radiography can provide considerable improvements to the inspection and testing procedures for valves in comparison to classical film radiography. These improvements can lead to significant financial advantages by providing real-time inspection results, significantly reduced inspection and decision-making time, and reduced operational cost. Digital image processing, including digital image enhancement, digital archiving, and digital communication of the images and the results, is also a considerable advantage over classical film radiography technology. Another advantage of digital radiography technology is the improved safety and the reduced environmental impact due to reduced exposure/test times, use of smaller exclusion zones, elimination of chemical processing, and absence of disposable materials. This paper reviews the existing technology and evaluates the potential of digital radiography for inspection and diagnostics of valves. Station needs and requirements are assessed, and the safety, environmental and economical constraints of digital radiography techniques estimated. The advantages and disadvantages of different digital radiography equipment are compared, and their limitations and characteristics studied. (author)

78 FR 25351 - Reports, Forms, and Recordkeeping Requirements

Science.gov (United States)

2013-04-30

... considerations for design modifications of current New Car Assessment Program Government 5-Star Safety Ratings... technologies such as advanced automatic crash notification and other technologies to determine how best to...

Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints

DEFF Research Database (Denmark)

Thompson, Mary Kathryn; Moroni, Giovanni; Vaneker, Tom

2016-01-01

The past few decades have seen substantial growth in Additive Manufacturing (AM) technologies. However, this growth has mainly been process-driven. The evolution of engineering design to take advantage of the possibilities afforded by AM and to manage the constraints associated with the technology...... has lagged behind. This paper presents the major opportunities, constraints, and economic considerations for Design for Additive Manufacturing. It explores issues related to design and redesign for direct and indirect AM production. It also highlights key industrial applications, outlines future...

Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints

DEFF Research Database (Denmark)

Thompson, Mary Kathryn; Moroni, Giovanni; Vaneker, Tom

2016-01-01

has lagged behind. This paper presents the major opportunities, constraints, and economic considerations for Design for Additive Manufacturing. It explores issues related to design and redesign for direct and indirect AM production. It also highlights key industrial applications, outlines future......The past few decades have seen substantial growth in Additive Manufacturing (AM) technologies. However, this growth has mainly been process-driven. The evolution of engineering design to take advantage of the possibilities afforded by AM and to manage the constraints associated with the technology...

Section 4: Requirements Intertwining

Science.gov (United States)

Loucopoulos, Pericles

Business analysts are being asked to develop increasingly complex and varied business systems that need to cater to the changing and dynamic market conditions of the new economy. This is particularly acute in today’s turbulent business environment where powerful forces such as deregulation, globalisation, mergers, advances in information and telecommunications technologies, and increasing education of people provide opportunities for organising work in ways that have never before been possible. Enterprises attempt to create wealth either by getting better at improving their products and services or by harnessing creativity and human-centred management to create innovative solutions. In these business settings, requirements become critical in bridging system solutions to organisational and societal problems. They intertwine organisational, social, cognitive, and implementation considerations and they can provide unique insights to change in systems and their business context. Such design situations often involve multiple stakeholders from different participating organisations, subcontractors, divisions, etc., who may have a diversity of expertise, come from different organisational cultures and often have competing goals. The success or failure of many projects depends, to a large extent, on understanding the contextual setting of requirements and their interaction amongst a diverse population of stakeholders.

Tethys: The Marine and Hydrokinetic Technology Environmental Impacts Knowledge Management System -- Requirements Specification -- Version 1.0

Energy Technology Data Exchange (ETDEWEB)

Butner, R. Scott; Snowden-Swan, Lesley J.; Ellis, Peter C.

2010-11-09

The marine and hydrokinetic (MHK) environmental impacts knowledge management system (KMS), dubbed Tethys after the mythical Greek goddess of the seas, is being developed for the U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy Wind and Hydropower Technologies Program (WHTP) by Pacific Northwest National Laboratory (PNNL). This requirements specification establishes the essential capabilities required of Tethys and clarifies for WHTP and the Tethys development team the results that must be achieved by the system.

The role of science and technology parks in communication processes between research institutions and industry

Directory of Open Access Journals (Sweden)

Paweł Sobkowicz

2013-12-01

Full Text Available Among the ways to bridge the gap between the research communities and the industry, one of the best known are the Science and Technology Parks. The scope of the offered services, the scale of operations and their revenues vary considerably. The largest parks gather companies, whose revenues may reach billions of dollars. Achieving such success requires, from the park operators, much more than offering attractive prices for office space. Moreover, it requires well-coordinated activities, based on a long term vision, from the central governments. The paper presents an analysis of the factors determining the success or fiasco of science and technology parks, both in worldwide and Polish context.

Design considerations for micro nuclear reactors to supply power to off-grid mines

Energy Technology Data Exchange (ETDEWEB)

Gihm, B.; Cooper, G.; Morettin, D.; De Koning, P., E-mail: bgihm@hatch.ca [Hatch Ltd., Mississauga, Ontario (Canada); Carreau, M. [Hatch Ltd., Montreal, Quebec (Canada); Sarvinis, J. [Hatch Ltd., Mississauga, Ontario (Canada)

2014-07-01

Nuclear technology vendors have been proposing to develop small scale nuclear reactors to supply power and heat to remote industrial operations such as a mining site. Based on extensive experience in integrating different power generation technologies with captive mining power systems, Hatch examined the technical requirements of small scale nuclear reactor application in remote mine power generation. Mining power systems have unique characteristics and challenges that set them apart from utility grid connected power systems. Key examples of such unique characteristics are: A small number of large motor loads such as hoists, pumps, shovels, pumps and crushers represent a large fraction of the peak load. These equipment may cause significant load fluctuations and put the power systems under high stress; There is no organic demand growth (i.e., the load growth occurs as a step increase); and, The extreme environmental conditions and remoteness of the sites introduce a set of operational challenges and require specialized planning. This paper presents real remote mine operation data to demonstrate the load profile of remote mining sites. The operation characteristics and performance requirements of diesel reciprocating engines are discussed, which have to be matched or exceeded by a small scale nuclear power plant if it is to be a viable technical alternative to diesel power. The power quality control options from wind power integration in isolated grids are discussed as a parallel can be drawn between wind and nuclear power application in remote mine power systems. Finally the authors provided a list of technical constraints and design considerations for very small modular reactor development. (author)

Design considerations for micro nuclear reactors to supply power to off-grid mines

International Nuclear Information System (INIS)

Gihm, B.; Cooper, G.; Morettin, D.; De Koning, P.; Carreau, M.; Sarvinis, J.

2014-01-01

Nuclear technology vendors have been proposing to develop small scale nuclear reactors to supply power and heat to remote industrial operations such as a mining site. Based on extensive experience in integrating different power generation technologies with captive mining power systems, Hatch examined the technical requirements of small scale nuclear reactor application in remote mine power generation. Mining power systems have unique characteristics and challenges that set them apart from utility grid connected power systems. Key examples of such unique characteristics are: A small number of large motor loads such as hoists, pumps, shovels, pumps and crushers represent a large fraction of the peak load. These equipment may cause significant load fluctuations and put the power systems under high stress; There is no organic demand growth (i.e., the load growth occurs as a step increase); and, The extreme environmental conditions and remoteness of the sites introduce a set of operational challenges and require specialized planning. This paper presents real remote mine operation data to demonstrate the load profile of remote mining sites. The operation characteristics and performance requirements of diesel reciprocating engines are discussed, which have to be matched or exceeded by a small scale nuclear power plant if it is to be a viable technical alternative to diesel power. The power quality control options from wind power integration in isolated grids are discussed as a parallel can be drawn between wind and nuclear power application in remote mine power systems. Finally the authors provided a list of technical constraints and design considerations for very small modular reactor development. (author)

Consideration of nuclear technology development on agricultural industrialization in Xinjiang

International Nuclear Information System (INIS)

Xu Fang; Xie Yinghua; Lei Bin

2010-01-01

This review describes the application of nuclear technology in Xinjiang agriculture along with industrialization and economic benefit since 1970s. Current problems in this field were analyzed and corresponding advices were presented. (authors)

Second annual clean coal technology conference: Proceedings. Volume 1

Energy Technology Data Exchange (ETDEWEB)

1993-09-09

The Second Annual Clean Coal Technology Conference was held at Atlanta, Georgia, September 7--9, 1993. The Conference, cosponsored by the US Department of Energy (USDOE) and the Southern States Energy Board (SSEB), seeks to examine the status and role of the Clean Coal Technology Demonstration Program (CCTDP) and its projects. The Program is reviewed within the larger context of environmental needs, sustained economic growth, world markets, user performance requirements and supplier commercialization activities. This will be accomplished through in-depth review and discussion of factors affecting domestic and international markets for clean coal technology, the environmental considerations in commercial deployment, the current status of projects, and the timing and effectiveness of transfer of data from these projects to potential users, suppliers, financing entities, regulators, the interested environmental community and the public. Individual papers have been entered separately.

Biogas technology in Pakistan

International Nuclear Information System (INIS)

Ahmed, M.

1997-02-01

Although biomethanation is a mature technology its implementation is paradoxically only partly a success in Pakistan. Biogas plants on family farms can be economical but seldom are so in Pakistan. Either the investment cost has been high or satisfactory performance of the process could not be maintained or in some case for a short period of time only. It is, however, concluded that biogas plants, if correctly operated and maintained, may prove to be appropriate to the technical abilities and economic capacity of Pakistani farmers. It can get a change to be disseminated in rural areas. Biogas technology is appropriate to the ecological and economic demands of the future. With the potential from existing cattle population only, 3 to 4 million family size biogas plants may be installed in Pakistan which can substitute of considerable part of rural fuel wood demand for their daily household energy requirements. A large amount of dung is burnt every year by households which if put in the biogas plant, may provide a considerable amount of energy along with organic fertilizer could be saved from being burned at the same time. On the basis of available data from the livestock excluding agriculture residue (50% collectivity-1991), in terms of fuel substitution, this would be equivalent to 1200 million litres of kerosene at worth economic value of 9021 million rupees saving in the form of gas and 821 million rupees as additional fertilizer value annually. (LN)

System considerations for airborne, high power superconducting generators

International Nuclear Information System (INIS)

Southall, H.L.; Oberly, C.E.

1979-01-01

The design of rotating superconducting field windings in high power generators is greatly influenced by system considerations. Experience with two superconducting generators designed to produce 5 and 20 Mw resulted in a number of design restrictions. The design restrictions imposed by system considerations have not prevented low weight and high voltage power generation capability. The application of multifilament Nb;sub 3;Sn has permitted a large thermal margin to be designed into the rotating field winding. This margin permits the field winding to remain superconducting under severe system operational requirements. System considerations include: fast rotational startup, fast ramped magnetic fields, load induced transient fields and airborne cryogen logistics. Preliminary selection of a multifilament Nb;sub 3;Sn cable has resulted from these considerations. The cable will carry 864 amp at 8.5K and 6.8 Tesla. 10 refs

Intranet Technology: Considerations for Implementation within the Department of Defense

National Research Council Canada - National Science Library

Rich, Oliver

1997-01-01

Intranets, internal networks based on the same technology and protocol as the World Wide Web, have emerged in the past two years as a very popular medium for communication and information exchange within organizations...

A 10-Year Assessment of Information and Communication Technology Tasks Required in Undergraduate Agriculture Courses

Science.gov (United States)

Edgar, Leslie D.; Johnson, Donald M.; Cox, Casandra

2012-01-01

This study sought to assess required information and communication technology (ICT) tasks in selected undergraduate agriculture courses in a land-grant university during a 10-year period. Selected agriculture faculty members in the fall 1999 (n = 63), 2004 (n = 55), and 2009 (n = 64) semesters were surveyed to determine the ICT tasks they required…

Robotics in rehabilitation: technology as destiny.

Science.gov (United States)

Stein, Joel

2012-11-01

Robotic aids for rehabilitation hold considerable promise but have not yet achieved widespread clinical adoption. Barriers to adoption include the limited data on efficacy, the single-purpose design of existing robots, financial considerations, and clinician lack of familiarity with this technology. Although the path forward to clinical adoption may be slow and have several false starts, the labor-saving aspect of robotic technology will ultimately ensure its adoption.

Communicating English for Science and Technology

DEFF Research Database (Denmark)

Mousten, Birthe

The book introduces and discusses some of the ideas, stylistics, methods, aids and conventions used in English for Science and Technology. The book centres on a mix of theoretical considerations, examples, drills and texts.......The book introduces and discusses some of the ideas, stylistics, methods, aids and conventions used in English for Science and Technology. The book centres on a mix of theoretical considerations, examples, drills and texts....

Technology assessment of various coal-fuel options

International Nuclear Information System (INIS)

Coenen, R.; Findling, B.; Klein-Vielhauer, S.; Nieke, E.; Paschen, H.; Tangen, H.; Wintzer, D.

1991-01-01

The technology assessment (TA) study of coal-based fuels presented in this report was performed for the Federal Ministry for Research and Technology. Its goal was to support decision-making of the Federal Ministry for Research and Technology in the field of coal conversion. Various technical options of coal liquefaction have been analyzed on the basis of hard coal as well as lignite -- direct liquefaction of coal (hydrogenation) and different possibilities of indirect liquefaction, that is the production of fuels (methanol, gasoline) by processing products of coal gasification. The TA study takes into consideration the entire technology chain from coal mining via coal conversion to the utilization of coal-based fuels in road transport. The analysis focuses on costs of the various options, overall economic effects, which include effects on employment and public budgets, and on environmental consequences compared to the use of liquid fuels derived from oil. Furthermore, requirements of infrastructure and other problems of the introduction of coal-based fuels as well as prospects for the export of technologies of direct and indirect coal liquefaction have been analyzed in the study. 14 figs., 10 tabs

Implementing Educational Technology in Higher Education: A Strategic Approach

Directory of Open Access Journals (Sweden)

Cynthia C. Roberts

2008-01-01

Full Text Available Although the move toward implementing technology in higher education is driven by an increasing number of competitors as well as student demand, there is still considerable resistance to embracing it. Adoption of technology requires more that merely installing a product. This paper outlines a framework for a strategic change process that can be utilized by educators for the purpose of the selection as well as successful implementation of educational technologies within their setting, in particular, online course management systems. The four steps of this process include strategic analysis, strategy making, strategic plan design, and strategic plan implementation. The choice to embrace a new system and the extent and speed of its implementation depends upon internal factors such as resources, organizational culture, faculty readiness, anticipated degree of resistance, and the degree of variance from the status quo. A case from the author’s experience provides one example of how the use of distance learning technology was strategically implemented.

Information data systems for a global change technology initiative architecture trade study

Science.gov (United States)

Murray, Nicholas D.

1991-01-01

The Global Change Technology Initiative (GCTI) was established to develop technology which will enable use of satellite systems of Earth observations on a global scale, enable use of the observations to predictively model Earth's changes, and provide scientists, government, business, and industry with quick access to the resulting information. At LaRC, a GCTI Architecture Trade Study was undertaken to develop and evaluate the architectural implications to meet the requirements of the global change studies and the eventual implementation of a global change system. The output of the trade study are recommended technologies for the GCTI. That portion of the study concerned with the information data system is documented. The information data system for an earth global change modeling system can be very extensive and beyond affordability in terms of today's costs. Therefore, an incremental approach to gaining a system is most likely. An options approach to levels of capability versus needed technologies was developed. The primary drivers of the requirements for the information data system evaluation were the needed science products, the science measurements, the spacecraft orbits, the instruments configurations, and the spacecraft configurations and their attendant architectures. The science products requirements were not studied here; however, some consideration of the product needs were included in the evaluation results. The information data system technology items were identified from the viewpoint of the desirable overall information system characteristics.

Coherence between institutions and technologies - The case of mini hydropower in Switzerland

OpenAIRE

Crettenand, Nicolas

2009-01-01

Switzerland, with the forecasted electricity gap between domestic production and demand, aims to significantly increase renewable energy sources including hydropower. Mini hydropower (below 1MW) currently has considerable unused technical potential. As a renewable energy source (RES) it can contribute to climate change mitigation. CO2-taxes or emission trading systems (ETS) for planned thermal power plants could help facilitate mini hydropower (MHP). The technology is mature, but requires ade...

THE CONNECTION BETWEEN MANAGEMENT AND TECHNOLOGY AND THE TECHNOLOGICAL MANAGEMENT

Directory of Open Access Journals (Sweden)

RAREŞ MUNTEANU

2010-01-01

Full Text Available In a new approach, the technology is taken into consideration as a resource of the business, in addition to the four traditional resources: material resources, financial resources, human resources and informational resources. This makes important for the managers to have solid technological knowledge, in addition to the economics. The research regarding the technological management (or the management of technology - MOT is lead by IAMOT (International Association in Management of Technology. There are a lot of connections between the technology on one side and the finances, the human resources, the marketing, the operational management on the other side. In our era the technology is more and more advanced and all the activities are strongly connected to it.

Mars Technology Program: Planetary Protection Technology Development

Science.gov (United States)

Lin, Ying

2006-01-01

This slide presentation reviews the development of Planetary Protection Technology in the Mars Technology Program. The goal of the program is to develop technologies that will enable NASA to build, launch, and operate a mission that has subsystems with different Planetary Protection (PP) classifications, specifically for operating a Category IVb-equivalent subsystem from a Category IVa platform. The IVa category of planetary protection requires bioburden reduction (i.e., no sterilization is required) The IVb category in addition to IVa requirements: (i.e., terminal sterilization of spacecraft is required). The differences between the categories are further reviewed.

Task 4 supporting technology. Densification requirements definition and test objectives. Propellant densification requirements definition

Science.gov (United States)

Lak, Tibor; Weeks, D. P.

1995-01-01

The primary challenge of the X-33 CAN is to build and test a prototype LO2 and LH2 densification ground support equipment (GSE) unit, and perform tank thermodynamic testing within the 15 month phase 1 period. The LO2 and LH2 propellant densification system will be scaled for the IPTD LO2 and LH2 tank configurations. The IPTD tanks were selected for the propellant technology demonstration because of the potential benefits to the phase 1 plan: tanks will be built in time to support thermodynamic testing; minimum cost; minimum schedule risk; future testing at MSFC will build on phase 1 data base; and densification system will be available to support X-33 and RLV engine test at IPTD. The objective of the task 1 effort is to define the preliminary requirements of the propellant densification GSE and tank recirculation system. The key densification system design parameters to be established in Task 1 are: recirculation flow rate; heat exchanger inlet temperature; heat exchanger outlet temperature; maximum heat rejection rate; vent flow rate (GN2 and GH2); densification time; and tank pressure level.

Tunable Microwave Component Technologies for SatCom-Platforms

Science.gov (United States)

Maune, Holger; Jost, Matthias; Wiens, Alex; Weickhmann, Christian; Reese, Roland; Nikfalazar, Mohammad; Schuster, Christian; Franke, Tobias; Hu, Wenjuan; Nickel, Matthias; Kienemund, Daniel; Prasetiadi, Ananto Eka; Jakoby, Rolf

2017-03-01

Modern communication platforms require a huge amount of switched RF component banks especially made of different filters and antennas to cover all operating frequencies and bandwidth for the targeted services and application scenarios. In contrast, reconfigurable devices made of tunable components lead to a considerable reduction in complexity, size, weight, power consumption, and cost. This paper gives an overview of suitable technologies for tunable microwave components especially for SatCom applications. Special attention is given to tunable components based on functional materials such as barium strontium titanate (BST) and liquid crystal (LC).

[Design considerations for clinical data management in an integrated remote medical system].

Science.gov (United States)

Bautu, E; Bautu, A; Ciorap, R; Pomazan, V M; Petcu, L C

2009-01-01

In this paper, we present a proposal for the design of a telemedicine system. The system (called SIMPA) will be used for noninvasive monitoring of some vital parameters of patients with chronic diseases. The telemedicine system contains a fixed unit and some mobile units. The mobile unit contains various sensors used to gather data about vital biosignals, a transceiver and a medical processor. On the fixed unit side, the host transceiver must be compatible with the mobile transceiver. On the server side, an application analyzes and processes the data and further stores it in dedicated databases. The database support for the telemedicine application is ensured by open source technologies and already available communication infrastructures (GSM networks). The requirements for the application were thoroughly analyzed and the Entity-Relationship diagram of the system was designed and translated into relational model. SIMPA will be implemented using only free and open source technologies, which will ensure a low cost and improved extensibility and portability. We presented some design considerations for a low-cost telemedicine system. The system will help optimize medical decisions and will increase the quality of the medical act and lower the cost, to the ultimate benefit of the patient.

The Tower Builders: A Consideration of STEM, STSE and Ethics in Science Education

Science.gov (United States)

Steele, Astrid; Brew, Christine R.; Beatty, Brenda R.

2012-01-01

The call for the integration of ethical considerations in the teaching of science is now firmly on the agenda. Taking as illustrative a science lesson in a pre-service teacher class, the authors consider the roles of STSE (science, technology, society and environment) and the increasingly influential heavily funded STEM (science, technology,…

Personal radiation detector at a high technology readiness level that satisfies DARPA's SN-13-47 and SIGMA program requirements

Science.gov (United States)

Ginzburg, D.; Knafo, Y.; Manor, A.; Seif, R.; Ghelman, M.; Ellenbogen, M.; Pushkarsky, V.; Ifergan, Y.; Semyonov, N.; Wengrowicz, U.; Mazor, T.; Kadmon, Y.; Cohen, Y.; Osovizky, A.

2015-06-01

There is a need to develop new personal radiation detector (PRD) technologies that can be mass produced. On August 2013, DARPA released a request for information (RFI) seeking innovative radiation detection technologies. In addition, on December 2013, a Broad Agency Announcement (BAA) for the SIGMA program was released. The RFI requirements focused on a sensor that should possess three main properties: low cost, high compactness and radioisotope identification capabilities. The identification performances should facilitate the detection of a hidden threat, ranging from special nuclear materials (SNM) to commonly used radiological sources. Subsequently, the BAA presented the specific requirements at an instrument level and provided a comparison between the current market status (state-of-the-art) and the SIGMA program objectives. This work presents an optional alternative for both the detection technology (sensor with communication output and without user interface) for DARPA's initial RFI and for the PRD required by the SIGMA program. A broad discussion is dedicated to the method proposed to fulfill the program objectives and to the selected alternative that is based on the PDS-GO design and technology. The PDS-GO is the first commercially available PRD that is based on a scintillation crystal optically coupled with a silicon photomultiplier (SiPM), a solid-state light sensor. This work presents the current performance of the instrument and possible future upgrades based on recent technological improvements in the SiPM design. The approach of utilizing the SiPM with a commonly available CsI(Tl) crystal is the key for achieving the program objectives. This approach provides the appropriate performance, low cost, mass production and small dimensions; however, it requires a creative approach to overcome the obstacles of the solid-state detector dark current (noise) and gain stabilization over a wide temperature range. Based on the presented results, we presume that

The Transition from Spacecraft Development Ot Flight Operation: Human Factor Considerations

Science.gov (United States)

Basilio, Ralph R.

2000-01-01

In the field of aeronautics and astronautics, a paradigm shift has been witnessed by those in academia, research and development, and private industry. Long development life cycles and the budgets to support such programs and projects has given way to aggressive task schedules and leaner resources to draw from all the while challenging assigned individuals to create and produce improved products of processes. however, this "faster, better, cheaper" concept cannot merely be applied to the design, development, and test of complex systems such as earth-orbiting of interplanetary robotic spacecraft. Full advantage is not possible without due consideration and application to mission operations planning and flight operations, Equally as important as the flight system, the mission operations system consisting of qualified personnel, ground hardware and software tools, and verified and validated operational processes, should also be regarded as a complex system requiring personnel to draw upon formal education, training, related experiences, and heuristic reasoning in engineering an effective and efficient system. Unquestionably, qualified personnel are the most important elements of a mission operations system. This paper examines the experiences of the Deep Space I Project, the first in a series of new technology in-flight validation missions sponsored by the United States National Aeronautics and Space Administration (NASA), specifically, in developing a subsystems analysis and technology validation team comprised of former spacecraft development personnel. Human factor considerations are investigated from initial concept/vision formulation; through operational process development; personnel test and training; to initial uplink product development and test support. Emphasis has been placed on challenges and applied or recommended solutions, so as to provide opportunities for future programs and projects to address and disposition potential issues and concerns as early

Cost-benefit considerations in regulatory decision-making

International Nuclear Information System (INIS)

Harvie, J.D.

1996-01-01

The Atomic Energy Control Board is investigating the feasibility of developing methods for factoring cost-benefit considerations into its regulatory decision-making. This initiative results, in part, from the federal government policy requiring cost-benefit considerations to be taken into account in regulatory processes, and from the recommendations of an Advisory Panel on Regulatory Review in 1993, submitted to the Minister of Natural Resources Canada. One of these recommendations stated: 'that mechanisms be developed to examine cost-benefit issues and work towards some consensus of opinion among stakeholders; a task force on the subject could be an appropriate starting point'. (author)

Pressure transmitters: Addressing post-Fukushima regulations and requirements with Bibloc technology by Rolls-Royce

International Nuclear Information System (INIS)

Fabbro, Herve; Desgeorge, Romain; Chowanek, Michel

2013-06-01

Nuclear power stations are designed to withstand substantial seismic activity and as such represent some of the most robust buildings in the world. However The Fukushima nuclear incident highlighted the potential vulnerability of nuclear power plants when multiple natural events of historic proportions happen simultaneously. Following the incident, the worldwide nuclear industry quite rightly called for an immediate review and a targeted reassessment of the safety margins of nuclear reactors. Several recommendations have been given by international safety authorities, including a significant toughening of the already stringent regulations and requirements, with respect to earthquakes, extreme temperatures, pressure and radiation resistance. In the event of an accident, a quick response is imperative and to act efficiently, a correct knowledge of the situation as well as an accurate estimation of its severity are required. Thus, it is essential to be able to rely on the most reliable sensors possible, in particular for the 50 to 100 classified pressure transmitters. Equipment used in nuclear plants all over the world, such pressure transmitters, are implemented following one of two different types of design: - The Monobloc design where almost all the equipment or system is installed very close to the reactor, within the reactor building. - The Bibloc design where the most sensitive parts (in particular the electronics) are removed from the harsh environment present in the vicinity of the reactor to be placed outside of the reactor building. The paper will present the advantages of the Bibloc technology and will show how this technology meets the 'Post Fukushima' requirements. (authors)

Ethical considerations for field research on fishes

Directory of Open Access Journals (Sweden)

Rhett H. Bennett

2016-12-01

Full Text Available Collection of data from animals for research purposes can negatively impact target or by-catch species if suitable animal ethics practices are not followed. This study aimed to assess the ethical requirements of peer-reviewed scientific journals that publish primary literature on fishes, and review the ethical considerations and animal care guidelines of national and international documents on the ethical treatment of animals for research, to provide an overview of the general ethical considerations for field research on fishes. A review of 250 peer-reviewed, ISI-rated journals publishing primary research on fishes revealed that nearly half (46% had no mention of ethics, treatment of animals or ethical requirements for publication in their author guidelines or publication policies. However, 18% of the journals reviewed identify a specific set of ethical guidelines to be followed before publishing research involving animals. Ethical considerations for investigators undertaking field research on fishes, common to most animal care policies, legislation and guiding documents, include adhering to relevant legislation, minimising sample sizes, reducing or mitigating pain and distress, employing the most appropriate and least invasive techniques and accurately reporting methods and findings. This information will provide potential investigators with a useful starting point for designing and conducting ethical field research. Application of ethical best practices in field sampling studies will improve the welfare of study animals and the conservation of rare and endangered species. Conservation implications: This article provides a list of ethical considerations for designing and conducting field research on fishes. By reviewing sampling techniques and processes that are frequently used in field research on fishes and by highlighting the potential negative impacts of these sampling techniques, this article is intended to assist researchers in planning

Legal Technology for Law Firms: Determining Roadmaps for Innovation

OpenAIRE

Kerikmäe, Tanel; Hoffmann, Thomas; Chochia, Archil

2018-01-01

The business model of many law firms, as legal professions on the whole, will be facing a considerable paradigm change since the work provided by law firms in the form of billable hours, in fact, largely consists of services which do not require superior legal education but involve mere data procession. It is only a question of time that the consequence – to have all outsourceable services be performed by means of legal technology – will become public knowledge in the branch, as the costs sav...

Translating silicon nanowire BioFET sensor-technology to embedded point-of-care medical diagnostics

DEFF Research Database (Denmark)

Pfreundt, Andrea; Zulfiqar, Azeem; Patou, François

2013-01-01

Silicon nanowire and nanoribbon biosensors have shown great promise in the detection of biomarkers at very low concentrations. Their high sensitivity makes them ideal candidates for use in early-stage medical diagnostics and further disease monitoring where low amounts of biomarkers need to be de......Silicon nanowire and nanoribbon biosensors have shown great promise in the detection of biomarkers at very low concentrations. Their high sensitivity makes them ideal candidates for use in early-stage medical diagnostics and further disease monitoring where low amounts of biomarkers need...... to be detected. However, in order to translate this technology from the bench to the bedside, a number of key issues need to be taken into consideration: Integrating nanobiosensors-based technology requires to overcome the difficult tradeoff between imperatives for high device reproducibilty and associated...... rising fabrication costs. Also the translation of nano-scale sensor technology into daily-use point-of-care devices requires acknowledgement of the end-user requirements, making device portability and human-interfacing a focus point in device development. Sample handling or purification for instance...

Required Technologies for A 10-16 m UV-Visible-IR Telescope on the Moon

Science.gov (United States)

Johnson, Stewart W.; Wetzel, John P.

1989-01-01

A successor to the Hubble Space Telescope, incorporating a 10 to 16 meter mirror, and operating in the UV-Visible-IR is being considered for emplacement on the Moon in the 21st Century. To take advantage of the characteristics of the lunar environment, such a telescope requires appropriate advances in technology. These technologies are in the areas of contamination/interference control, test and evaluation, manufacturing, construction, autonomous operations and maintenance, power and heating/cooling, stable precision structures, optics, parabolic antennas, and communications/control. This telescope for the lunar surface needs to be engineered to operate for long periods with minimal intervention by humans or robots. What is essential for lunar observatory operation is enforcement of a systems engineering approach that makes compatible all lunar operations associated with habitation, resource development, and science.

Environmental and institutional considerations in the development and implementation of biomass energy technologies

Energy Technology Data Exchange (ETDEWEB)

Schwab, C.

1979-09-01

The photosynthetic energy stored in plant and organic waste materials in the United States amounts to approximately 40% of the nation's total energy consumption. Conversion of this energy to usable power sources is a complex process, involving many possible materials, conversion technologies, and energy products. Near-term biomass technologies are predominantly based on traditional fuel use and have the advantage over other solar technologies of fitting into existing tax and business practices. However, no other solar technology has the potential for such large environmental impacts. Unlike the conversion of sun, wind, and ocean thermal energy, the conversion of the biomass energy source, in the form of biomass residues and wastes, can create problems. Environmental impacts may be significant, and legal responses to these impacts are a key determinant to the widespread adoption of biomass technologies. This paper focuses on the major legal areas which will impact on biomass energy conversion. These include (1) the effect of existing state and federal legislation, (2) the role of regulatory agencies in the development of biomass energy, (3) governmental incentives to biomass development, and (4) legal issues surrounding the functioning of the technologies themselves. Emphasis is placed on the near-term technologies whose environmental impacts and institutional limitations are more readily identified. If biomass energy is to begin to achieve its apparently great potential, these questions must receive immediate attention.

Virtual reality technology as a tool for human factors requirements evaluation in design of the nuclear reactors control desks

International Nuclear Information System (INIS)

Grecco, Claudio H.S.; Santos, Isaac J.A.L.; Mol, Antonio C.A.; Carvalho, Paulo V.R.; Silva, Antonio C.F.; Ferreira, Francisco J.O.; Dutra, Marco A.M.

2007-01-01

The Virtual Reality (VR) is an advanced computer interface technology that allows the user to internet or to explore a three-dimensional environment through the computer, as was part of the virtual world. This technology presents great applicability in the most diverse areas of the human knowledge. This paper presents a study on the use of the VR as tool for human factors requirements evaluation in design of the nuclear reactors control desks. Moreover, this paper presents a case study: a virtual model of the control desk, developed using virtual reality technology to be used in the human factors requirements evaluation. This case study was developed in the Virtual Reality Laboratory at IEN, and understands the stereo visualization of the Argonauta research nuclear reactor control desk for a static ergonomic evaluation using check-lists, in accordance to the standards and human factors nuclear international guides (IEC 1771, NUREG-0700). (author)

Virtual reality technology as a tool for human factors requirements evaluation in design of the nuclear reactors control desks

Energy Technology Data Exchange (ETDEWEB)

Grecco, Claudio H.S.; Santos, Isaac J.A.L.; Mol, Antonio C.A.; Carvalho, Paulo V.R.; Silva, Antonio C.F.; Ferreira, Francisco J.O.; Dutra, Marco A.M. [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil)]. E-mail: grecco@ien.gov.br; luquetti@ien.gov.br; mol@ien.gov.br; paulov@ien.gov.br; tonico@ien.gov.br; fferreira@ien.gov.br; dutra@ien.gov.br

2007-07-01

The Virtual Reality (VR) is an advanced computer interface technology that allows the user to internet or to explore a three-dimensional environment through the computer, as was part of the virtual world. This technology presents great applicability in the most diverse areas of the human knowledge. This paper presents a study on the use of the VR as tool for human factors requirements evaluation in design of the nuclear reactors control desks. Moreover, this paper presents a case study: a virtual model of the control desk, developed using virtual reality technology to be used in the human factors requirements evaluation. This case study was developed in the Virtual Reality Laboratory at IEN, and understands the stereo visualization of the Argonauta research nuclear reactor control desk for a static ergonomic evaluation using check-lists, in accordance to the standards and human factors nuclear international guides (IEC 1771, NUREG-0700). (author)

Hydrogen technologies and the technology learning curve

International Nuclear Information System (INIS)

Rogner, H.-H.

1998-01-01

On their bumpy road to commercialization, hydrogen production, delivery and conversion technologies not only require dedicated research, development and demonstration efforts, but also protected niche markets and early adopters. While niche markets utilize the unique technological properties of hydrogen, adopters exhibit a willingness to pay a premium for hydrogen fueled energy services. The concept of the technology learning curve is applied to estimate the capital requirements associated with the commercialization process of several hydrogen technologies. (author)

Technology for whom: too dear to work. [Political, economic, and social problems

Energy Technology Data Exchange (ETDEWEB)

Stewart, F

1978-01-01

In spite of growth in per capita gross national product, less-developed countries (LDCs) continue to have large numbers of people who are unemployed and living in extreme poverty. The failure of advanced technology to create adequate jobs has led to a strong movement for more appropriate technology. Advanced technology is inappropriate because the capital costs per employee are too high to equip enough workers, plants are built on too large a scale for the market, and the combination creates an economic enclave which ignores the rest of the population. Appropriate technology gives priority to the basic needs of the poor and includes raising their income level by expanding productive employment. This requires inexpensive, small-scale technology that needs few skills and uses local materials. More technological research and development is needed in the LDCs as well as changes in the way income and investment resources are distributed, but this will entail changing the decision making process to include political and socio-economic considerations.

Emerging sensor and I and C technologies for nuclear power plants

International Nuclear Information System (INIS)

Korsah, K.; Wood, R. T.; Freer, E.; Antonescu, C.

2006-01-01

This paper presents the findings from a survey of emerging technologies in the field of instrumentation and controls (I and C). The survey findings give an overview of the state-of-the-art in selected technology focus areas for industrial, research, or scientific applications that are relevant to nuclear power plant I and C systems, and discuss potential regulatory impact for safety-related applications. Four technology focus areas are selected for review: Sensors and Measurement Systems; Radiation Hardness of Microprocessors and other Integrated Circuits; Diagnostics and Prognostics Systems; and High-Integrity Software. It is concluded that, while there have been considerable advances in digital I and C hardware, advances in software engineering have not kept pace with hardware. The authors anticipate advances in hardware (e.g., more accurate sensors, sophisticated on-line diagnostics, advances in rad-hard electronics) to influence some regulatory revisions (e.g., surveillance requirements, margins, calibration intervals). However, the state-of-the-art in software engineering has not advanced enough to warrant significant changes in the current position in software review requirements. (authors)

Mirror Fusion vacuum technology developments

International Nuclear Information System (INIS)

Batzer, T.H.; Call, W.R.

1983-01-01

Magnetic Mirror Fusion experiments, such as MFTF-B+T (Mirror Fusion Test Facility-B, Tritium Upgrade) and foreseeable follow-on devices, have operational and maintenance requirements that have not yet been fully demonstrated. Among those associated with vacuum technology are the very-high continuous-pumping speeds, 10 7 to 10 8 l/s for D 2 , T 2 and, to a lesser extent, He; the early detection of water leaks from the very-high heat-flux neutral-beam dumps and the detection and location of leaks in the superconducting magnets not protected by guard vacuums. Possible solutions to these problems have been identified and considerable progress has been made toward successfully demonstrating their feasibility

Mirror fusion vacuum technology developments

International Nuclear Information System (INIS)

Batzer, T.H.; Call, W.R.

1983-01-01

Magnetic Mirror Fusion experiments, such as MFTF-B+T (Mirror Fusion Test Facility-B, Tritium Upgrade) and foreseeable follow-on devices, have operational and maintenance requirements that have not yet been fully demonstrated. Among those associated with vacuum technology are the very-high continuous-pumping speeds, 10 7 to 10 8 l/s for D 2 , T 2 and, to a lesser extent, He; the early detection of water leaks from the very-high heat-flux neutral-beam dumps and the detection and location of leaks in the superconducting magnets not protected by guard vacuums. Possible solutions to these problems have been identified and considerable progress has been made toward successfully demonstrating their feasibility

Application specific integrated circuit (ASIC) readout technologies for future ion beam analytical instruments

Energy Technology Data Exchange (ETDEWEB)

Whitlow, Harry J. E-mail: harry_j.whitlow@nuclear.lu.se

2000-03-01

New possibilities for ion beam analysis (IBA) are afforded by recent developments in detector technology which facilitate the parallel collection of data from a large number of channels. Application specific integrated circuit (ASIC) technologies, which have been widely employed for multi-channel readout systems in nuclear and particle physics, are more net-cost effective (160/channel for 1000 channels) and a more rational solution for readout of a large number of channels than afforded by conventional electronics. Based on results from existing and on-going chip designs, the possibilities and issues of ASIC readout technology are considered from the IBA viewpoint. Consideration is given to readout chip architecture and how the stringent resolution, linearity and stability requirements for IBA may be met. In addition the implications of the restrictions imposed by ASIC technology are discussed.

Solar Preheated Ventilation - Innovative Solar Technology

National Research Council Canada - National Science Library

Gaberson, Howard

1999-01-01

.... This innovative technology applies to both new construction or rehabilitation projects. This TDS introduces this low maintenance solar technology for consideration in all future industrial ventilation or HVAC projects...

Satellite Power Systems (SPS) concept definition study. Volume 6: SPS technology requirements and verification

Science.gov (United States)

Hanley, G.

1978-01-01

Volume 6 of the SPS Concept Definition Study is presented and also incorporates results of NASA/MSFC in-house effort. This volume includes a supporting research and technology summary. Other volumes of the final report that provide additional detail are as follows: (1) Executive Summary; (2) SPS System Requirements; (3) SPS Concept Evolution; (4) SPS Point Design Definition; (5) Transportation and Operations Analysis; and Volume 7, SPS Program Plan and Economic Analysis.

Material property requirements for application leak-before-break technology on nuclear power plant high-energy piping

International Nuclear Information System (INIS)

Li Chengliang; Deng Xiaoyun; Yin Zhiying; Liu Meng

2012-01-01

The application of leak-before-break (LBB) technology on nuclear power plant high-energy piping systems can improve their safety and economy, while propose some new requirements on testing material properties. The U.S. Nuclear Regulatory Commission's LBB related standard review plan and implementation specifications were analyzed, and test items, object, temperature, quantity and thermal aging effect of five general requirements were summarized. In addition, four key testing technical requirements, such as specimen size, side grooves, strain range and the orientation of specimens were also discussed to ensure the test data usefulness, representativeness and integrity. This study can provide some guidance for the aforementioned test program on domestic materials. (authors)

Energy storage technology for electric and hybrid vehicles. Matching technology to design requirements

Energy Technology Data Exchange (ETDEWEB)

Wahlstroem, J. [Sycon Energikonsult AB, Malmoe (Sweden)

1999-12-01

A central issue when dealing with electrical vehicles has always been how to store energy in sufficient quantities. On April 27 through 28 1999 a workshop was held on this matter at University of California Davis (UC Davis). Organizer and host was Dr. Andrew Burke and the Institute of Transportation Studies (ITS) at UC Davis. The workshop included battery technology, ultra capacitors and fly wheels, but did not include fuel cell technology. In this paper the conference is reviewed with the emphasis on battery development. A section on ultra capacitors and flywheels is also included. The overall observation made at the conference is that most of the effort on energy storage in electric and hybrid vehicles are put into batteries. There is some development on ultra capacitors but almost none on flywheels. The battery also seems to be the choice of the car industry at this point, especially the pulse battery for engine dominant hybrid vehicles, like the Toyota Prius. The battery manufacturers seem to focus more on technology development than cost reduction at this point. An important technological issue as of now is to improve thermal management in order to increase life of the batteries. But when the technological goals are met focus must shift to cost minimization and marketing if the battery electric vehicle shall make a market break through.

Considerations for Probabilistic Analyses to Assess Potential Changes to Large-Break LOCA Definition for ECCS Requirements

International Nuclear Information System (INIS)

Wilkowski, G.; Rudland, D.; Wolterman, R.; Krishnaswamy, P.; Scott, P.; Rahman, S.; Fairbanks, C.

2002-01-01

The U.S.NRC has undertaken a study to explore changes to the body of Part 50 of the U.S. Federal Code of Regulations, to incorporate risk-informed attributes. One of the regulations selected for this study is 10 CFR 50.46, A cceptance Criteria for Emergency Core Cooling Systems for Light-Water Nuclear Power Reactors . These changes will potentially enhance safety and reduce unnecessary burden on utilities. Specific attention is being paid to redefining the maximum pipe break size for LB-LOCA by determining the spectrum of pipe diameter (or equivalent opening area) versus failure probabilities. In this regard, it is necessary to ensure that all contributors to probabilistic failures are accounted for when redefining ECCS requirements. This paper describes initial efforts being conducted for the U.S.NRC on redefining the LB-LOCA requirements. Consideration of the major contributors to probabilistic failure, and deterministic aspects for modeling them, are being addressed. At this time three major contributors to probabilistic failures are being considered. These include: (1) Analyses of the failure probability from cracking mechanisms that could involve rupture or large opening areas from either through-wall or surface flaws, whether the pipe system was approved for leak-before-break (LBB) or not. (2) Future degradation mechanisms, such as recent occurrence of PWSCC in PWR piping need to be included. This degradation mechanism was not recognized as being an issue when LBB was approved for many plants or when the initial risk-informed inspection plans were developed. (3) Other indirect causes of loss of pressure-boundary integrity than from cracks in the pipe system also should be included. The failure probability from probabilistic fracture mechanics will not account for these other indirect causes that could result in a large opening in the pressure boundary: i.e., failure of bolts on a steam generator manway, flanges, and valves; outside force damage from the

Responding to and Supporting Students with Disabilities: Risk Management Considerations

Science.gov (United States)

Lundquist, Anne; Shackelford, Allan

2011-01-01

Making the "right" risk management decisions involving students with significant psychological disabilities requires a clear and comprehensive understanding of the legal obligations and duties at issue. It also requires taking into consideration the best interests of these individual students. At the same time, decision makers must focus…

Lightweight high-performance 1-4 meter class spaceborne mirrors: emerging technology for demanding spaceborne requirements

Science.gov (United States)

Hull, Tony; Hartmann, Peter; Clarkson, Andrew R.; Barentine, John M.; Jedamzik, Ralf; Westerhoff, Thomas

2010-07-01

Pending critical spaceborne requirements, including coronagraphic detection of exoplanets, require exceptionally smooth mirror surfaces, aggressive lightweighting, and low-risk cost-effective optical manufacturing methods. Simultaneous development at Schott for production of aggressively lightweighted (>90%) Zerodur® mirror blanks, and at L-3 Brashear for producing ultra-smooth surfaces on Zerodur®, will be described. New L-3 techniques for large-mirror optical fabrication include Computer Controlled Optical Surfacing (CCOS) pioneered at L-3 Tinsley, and the world's largest MRF machine in place at L-3 Brashear. We propose that exceptional mirrors for the most critical spaceborne applications can now be produced with the technologies described.

Coupling technology for dual-purpose nuclear-desalting plants

International Nuclear Information System (INIS)

Jones, J.E. Jr.; Anderson, T.D.; Reed, S.A.

1976-11-01

Although the basic technology for the various components of nuclear dual-purpose plants is reasonably well developed, the techniques of coupling the elements together to form a reliable, economical system that will satisfy the diverse operating requirements are not well established. The purpose of the study reported is to examine the technical, economic, and safety considerations in coupling nuclear power plants with distillation units to form a dual-purpose power and water distillation plant. The basic coupling arrangement required to provide a large-scale dual-purpose water plant is to supply steam to the water plant from the exhaust of a back-pressure turbine. The principal component at the interface that may require major research and development is the back-pressure turbine. To satisfy the operational requirements, two major auxiliary systems will be needed. These are: (1) a prime-steam bypass system, and (2) auxiliary condensers. These systems will provide a degree of independence between water and power production and can be justified economically

Increasing clinical presence of mobile communication technology: avoiding the pitfalls.

Science.gov (United States)

Visvanathan, Akila; Gibb, Alan P; Brady, Richard R W

2011-10-01

Mobile communication technologies are employed in many diverse areas of healthcare delivery to provide improved quality and efficiency of communication and facilitate increased rapidity of data or information transfer. Mobile phones enable healthcare professionals to possess a portable platform from which to provide many healthcare-related applications and are a popular means to directly communicate with colleagues and patients. As involvement of mobile communication technology in healthcare delivery continues to rapidly expand, there are also important considerations of relevance to patient safety and security as a result. Here, we review the previous evidence of reported clinical risks associated with mobile communication technology, such as electromagnetic interference, confidentiality and data security, distraction/noise, infection control, and cross contamination. In conclusion, although mobile phones provide much putative potential improvement to healthcare delivery, further evaluation and research are required to both inform and protect health professionals and users of such technology in the healthcare environment and provide the evidence base to support the provision of clear and comprehensive guidelines.

Dental considerations in cardiovascular patients: A practical perspective

OpenAIRE

Chaudhry, Swantika; Jaiswal, Ritika; Sachdeva, Surender

2016-01-01

Cardiovascular disease trends, complications, and associated therapeutics impact the dental health and treatment. Such patients require special consideration with regard to when and which dental treatment is appropriate and what precautions are required. Alertness to potential oral adverse drug reactions enables referral of patient's to his physician or cardiologist. Cardiovascular drugs are also known to have mild to potentially fatal drug interactions. Dental professionals may be the first ...

Security force effectiveness and technology

International Nuclear Information System (INIS)

Seaton, M.B.

1988-01-01

No one would propose ineffective security forces. Applied technology always has, as its purpose, to increase effectiveness. Evidence exists, however, that poorly conceived or executed technological solutions can actually do more harm than good. The author argues for improved human factor considerations in physical security applied technology -- especially in the area of security console operations

Defining the "proven technology" technical criterion in the reactor technology assessment for Malaysia's nuclear power program

Science.gov (United States)

Anuar, Nuraslinda; Kahar, Wan Shakirah Wan Abdul; Manan, Jamal Abdul Nasir Abd

2015-04-01

Developing countries that are considering the deployment of nuclear power plants (NPPs) in the near future need to perform reactor technology assessment (RTA) in order to select the most suitable reactor design. The International Atomic Energy Agency (IAEA) reported in the Common User Considerations (CUC) document that "proven technology" is one of the most important technical criteria for newcomer countries in performing the RTA. The qualitative description of five desired features for "proven technology" is relatively broad and only provides a general guideline to its characterization. This paper proposes a methodology to define the "proven technology" term according to a specific country's requirements using a three-stage evaluation process. The first evaluation stage screens the available technologies in the market against a predefined minimum Technology Readiness Level (TRL) derived as a condition based on national needs and policy objectives. The result is a list of technology options, which are then assessed in the second evaluation stage against quantitative definitions of CUC desired features for proven technology. The potential technology candidates produced from this evaluation is further narrowed down to obtain a list of proven technology candidates by assessing them against selected risk criteria and the established maximum allowable total score using a scoring matrix. The outcome of this methodology is the proven technology candidates selected using an accurate definition of "proven technology" that fulfills the policy objectives, national needs and risk, and country-specific CUC desired features of the country that performs this assessment. A simplified assessment for Malaysia is carried out to demonstrate and suggest the use of the proposed methodology. In this exercise, ABWR, AP1000, APR1400 and EPR designs assumed the top-ranks of proven technology candidates according to Malaysia's definition of "proven technology".

Perioperative Temperature Measurement Considerations Relevant to Reporting Requirements for National Quality Programs Using Data From Anesthesia Information Management Systems.

Science.gov (United States)

Epstein, Richard H; Dexter, Franklin; Hofer, Ira S; Rodriguez, Luis I; Schwenk, Eric S; Maga, Joni M; Hindman, Bradley J

2018-02-01

Perioperative hypothermia may increase the incidences of wound infection, blood loss, transfusion, and cardiac morbidity. US national quality programs for perioperative normothermia specify the presence of at least 1 "body temperature" ≥35.5°C during the interval from 30 minutes before to 15 minutes after the anesthesia end time. Using data from 4 academic hospitals, we evaluated timing and measurement considerations relevant to the current requirements to guide hospitals wishing to report perioperative temperature measures using electronic data sources. Anesthesia information management system databases from 4 hospitals were queried to obtain intraoperative temperatures and intervals to the anesthesia end time from discontinuation of temperature monitoring, end of surgery, and extubation. Inclusion criteria included age >16 years, use of a tracheal tube or supraglottic airway, and case duration ≥60 minutes. The end-of-case temperature was determined as the maximum intraoperative temperature recorded within 30 minutes before the anesthesia end time (ie, the temperature that would be used for reporting purposes). The fractions of cases with intervals >30 minutes between the last intraoperative temperature and the anesthesia end time were determined. Among the hospitals, averages (binned by quarters) of 34.5% to 59.5% of cases had intraoperative temperature monitoring discontinued >30 minutes before the anesthesia end time. Even if temperature measurement had been continued until extubation, averages of 5.9% to 20.8% of cases would have exceeded the allowed 30-minute window. Averages of 8.9% to 21.3% of cases had end-of-case intraoperative temperatures <35.5°C (ie, a quality measure failure). Because of timing considerations, a substantial fraction of cases would have been ineligible to use the end-of-case intraoperative temperature for national quality program reporting. Thus, retrieval of postanesthesia care unit temperatures would have been necessary. A

Transportation Energy Futures Series: Vehicle Technology Deployment Pathways: An Examination of Timing and Investment Constraints

Energy Technology Data Exchange (ETDEWEB)

Plotkin, S.; Stephens, T.; McManus, W.

2013-03-01

Scenarios of new vehicle technology deployment serve various purposes; some will seek to establish plausibility. This report proposes two reality checks for scenarios: (1) implications of manufacturing constraints on timing of vehicle deployment and (2) investment decisions required to bring new vehicle technologies to market. An estimated timeline of 12 to more than 22 years from initial market introduction to saturation is supported by historical examples and based on the product development process. Researchers also consider the series of investment decisions to develop and build the vehicles and their associated fueling infrastructure. A proposed decision tree analysis structure could be used to systematically examine investors' decisions and the potential outcomes, including consideration of cash flow and return on investment. This method requires data or assumptions about capital cost, variable cost, revenue, timing, and probability of success/failure, and would result in a detailed consideration of the value proposition of large investments and long lead times. This is one of a series of reports produced as a result of the Transportation Energy Futures (TEF) project, a Department of Energy-sponsored multi-agency effort to pinpoint underexplored strategies for abating GHGs and reducing petroleum dependence related to transportation.

Transportation Energy Futures Series. Vehicle Technology Deployment Pathways. An Examination of Timing and Investment Constraints

Energy Technology Data Exchange (ETDEWEB)

Plotkin, Steve [Argonne National Lab. (ANL), Argonne, IL (United States); Stephens, Thomas [Argonne National Lab. (ANL), Argonne, IL (United States); McManus, Walter [Oakland Univ., Rochester, MI (United States)

2013-03-01

Scenarios of new vehicle technology deployment serve various purposes; some will seek to establish plausibility. This report proposes two reality checks for scenarios: (1) implications of manufacturing constraints on timing of vehicle deployment and (2) investment decisions required to bring new vehicle technologies to market. An estimated timeline of 12 to more than 22 years from initial market introduction to saturation is supported by historical examples and based on the product development process. Researchers also consider the series of investment decisions to develop and build the vehicles and their associated fueling infrastructure. A proposed decision tree analysis structure could be used to systematically examine investors' decisions and the potential outcomes, including consideration of cash flow and return on investment. This method requires data or assumptions about capital cost, variable cost, revenue, timing, and probability of success/failure, and would result in a detailed consideration of the value proposition of large investments and long lead times. This is one of a series of reports produced as a result of the Transportation Energy Futures (TEF) project, a Department of Energy-sponsored multi-agency effort to pinpoint underexplored strategies for abating GHGs and reducing petroleum dependence related to transportation.

New stage of clean coal technology in Japan; Clean coal technology no aratana tenkai ni tsuite

Energy Technology Data Exchange (ETDEWEB)

Kawaguchi, Y [Agency of Natural Resources and Energy, Tokyo (Japan)

1996-09-01

The paper described the positioning and new development of clean coal technology. Coal is an important resource which supplies approximately 30% of the energy consumed in all the world. In the Asian/Pacific region, especially, a share of coal in energy is high, around 60% of the world, and it is indispensable to continue using coal which is abundantly reserved. Japan continues using coal as an important energy among petroleum substituting energies taking consideration of the global environment, and is making efforts for development and promotion of clean coal technology aiming at further reduction of environmental loads. Moreover, in the Asian region where petroleum depends greatly upon outside the region, it is extremely important for stabilization of Japan`s energy supply that coal producing countries in the region promote development/utilization of their coal resources. For this, it is a requirement for Japan to further a coal policy having an outlook of securing stable coal supply/demand in the Asian region. 6 figs., 2 tabs.

Space Transportation System Availability Requirements and Its Influencing Attributes Relationships

Science.gov (United States)

Rhodes, Russell E.; Adams, Timothy C.; McCleskey, Carey M.

2008-01-01

It is important that engineering and management accept the need for an availability requirement that is derived with its influencing attributes. It is the intent of this paper to provide the visibility of relationships of these major attribute drivers (variables) to each other and the resultant system inherent availability. Also important to provide bounds of the variables providing engineering the insight required to control the system's engineering solution, e.g., these influencing attributes become design requirements also. These variables will drive the need to provide integration of similar discipline functions or technology selection to allow control of the total parts count. The relationship of selecting a reliability requirement will place a constraint on parts count to achieve a given availability requirement or if allowed to increase the parts count will drive the system reliability requirement higher. They also provide the understanding for the relationship of mean repair time (or mean down time) to maintainability, e.g., accessibility for repair, and both the mean time between failure, e.g., reliability of hardware and availability. The concerns and importance of achieving a strong availability requirement is driven by the need for affordability, the choice of using the two launch solution for the single space application, or the need to control the spare parts count needed to support the long stay in either orbit or on the surface of the moon. Understanding the requirements before starting the architectural design concept will avoid considerable time and money required to iterate the design to meet the redesign and assessment process required to achieve the results required of the customer's space transportation system. In fact the impact to the schedule to being able to deliver the system that meets the customer's needs, goals, and objectives may cause the customer to compromise his desired operational goal and objectives resulting in considerable

Space Transportation System Availability Requirement and Its Influencing Attributes Relationships

Science.gov (United States)

Rhodes, Russel E.; Adams, Timothy C.; McCleskey, Carey M.

2008-01-01

It is important that engineering and management accept the need for an availability requirement that is derived with its influencing attributes. It is the intent of this paper to provide the visibility of relationships of these major attribute drivers (variables) to each other and the resultant system inherent availability. Also important to provide bounds of the variables providing engineering the insight required to control the system's engineering solution, e.g., these influencing attributes become design requirements also. These variables will drive the need to provide integration of similar discipline functions or technology selection to allow control of the total parts count. The relationship of selecting a reliability requirement will place a constraint on parts count to achieve a given availability requirement or if allowed to increase the parts count will drive the system reliability requirement higher. They also provide the understanding for the relationship of mean repair time (or mean down time) to maintainability, e.g., accessibility for repair, and both the mean time between failure, e.g., reliability of hardware and availability. The concerns and importance of achieving a strong availability requirement is driven by the need for affordability, the choice of using the two launch solution for the single space application, or the need to control the spare parts count needed to support the long stay in either orbit or on the surface of the moon. Understanding the requirements before starting the architectural design concept will avoid considerable time and money required to iterate the design to meet the redesign and assessment process required to achieve the results required of the customer's space transportation system. In fact the impact to the schedule to being able to deliver the system that meets the customer's needs, goals, and objectives may cause the customer to compromise his desired operational goal and objectives resulting in considerable

Regulatory requirements of the integrated technology demonstration program, Savannah River Site (U)

International Nuclear Information System (INIS)

Bergren, C.L.

1992-01-01

The integrated demonstration program at the Savannah River Site (SRS) involves demonstration, testing and evaluation of new characterization, monitoring, drilling and remediation technologies for soils and groundwater impacted by organic solvent contamination. The regulatory success of the demonstration program has developed as a result of open communications between the regulators and the technical teams involved. This open dialogue is an attempt to allow timely completion of applied environmental restoration demonstrations while meeting all applicable regulatory requirements. Simultaneous processing of multiple regulatory documents (satisfying RCRA, CERCLA, NEPA and various state regulations) has streamlined the overall permitting process. Public involvement is achieved as various regulatory documents are advertised for public comment consistent with the site's community relations plan. The SRS integrated demonstration has been permitted and endorsed by regulatory agencies, including the Environmental Protection Agency (EPA) and the South Carolina Department of Health and Environmental Control. EPA headquarters and regional offices are involved in DOE's integrated Demonstration Program. This relationship allows for rapid regulatory acceptance while reducing federal funding and time requirements. (author)

Design considerations for heated wells in gloveboxes

International Nuclear Information System (INIS)

Frigo, A. A.; Preuss, D. E.

1999-01-01

Heated wells in gloveboxes have been used for many years by the Argonne National Laboratory Chemical Technology Division for nuclear-technology, waste-management, chemical-technology, and analytical-chemistry research. These wells allow experiments to be isolated from the main working volume of the glovebox. In addition, wells, when sealed, allow experiments to be conducted under pressurized or vacuum conditions. Until recently, typical maximum operational temperatures were about 500 C. However, more recent research is requiring operational temperatures approaching 900 C. These new requirements pose interesting design challenges that must be resolved. Some problem areas include temperature effects on material properties, maintaining a seal, cooling selected areas, and minimizing stresses. This paper discusses issues related to these design challenges and the ways in which these issues have been resolved

Starting a New Technology Course?: An Opportunity to Develop Student Technological Literacy

Science.gov (United States)

Moye, Johnny J.

2008-01-01

Starting a new course can be intimidating, especially if the person is the first to teach it in his or her school district. A teacher must take many things into consideration when constructing the content for a new course. The primary focus should be on the development of student technological literacy. The International Technology Education…

Fuel cycle financing, capital requirements and sources of funds

International Nuclear Information System (INIS)

Manderbach, R.W.

1977-01-01

An issue of global importance today is the economic case for nuclear power and the conservation of precious fossil resources. A question important to all of us is can sufficient financial resources be attracted to the nuclear industry in order to develop a complete fuel cycle industry capable of meeting the requirements of a global nuclear power industry. Future growth of the nuclear power industry will depend to a large extent on the timely development of a private competitive industry covering the total fuel cycle. The report of the Edison Electric Institute on Nuclear Fuels Supply estimates that by 1985 initial capital investment in the nuclear fuel cycle will total $15 billion and by the year 2000, $60 billion will be required. Although undoubtedly the amount of funding projected is manageable from a global availability standpoint, there is a hesitancy to commit financial resources to certain segments of the fuel cycle. This is because of the many unresolved problems in connection with the nuclear industry such as uncertainty regarding local and international governmental regulations and legislation, environmental and alternative technological considerations coupled, of course, with the substantial capital long term commitments needed in each of the several segments of the processes. Activities associated with the nuclear fuel cycle have unique investment requirements. Investments are needed in many diverse unrelated fields such as resource development and high technology process some of which are not yet fully commercialized. Sources of capital will be examined on a national scale, such as net earnings, depreciation, capital market and public subsidies. The paper also examines, in the broader context, capital investments in highly industrialized and developing countries as well as discussing the possible areas of Government guarantees and financing. The intensive capital required in certain segments of the cycle, which are to be developed by private

Material properties requirements for LMFBR structural design: General considerations and data needs

Energy Technology Data Exchange (ETDEWEB)

Pugh, C E [Oak Ridge National Laboratory, Oak Ridge, TN (United States); Purdy, C M [U.S. Energy Research and Development Administration (United States)

1977-07-01

A statement is given of material properties information needed in connection with the structural design technology for liquid-metal fast breeder reactor (LMFBR) primary circuit components. Implementation of current analysis methods and criteria is considered with an emphasis on data and data correlations for performing elastic-plastic and creep analyses, for establishing allowable stress limits, and for computing creep-fatigue damage. Further development of the technology is discussed in relation to properties information. Emphasis is placed on improved constitutive equations for representing inelastic material behavior, on procedures for treating time-dependent fatigue, and on criteria for creep rupture. The properties are generally discussed without regard to specific alloys, since most categories of information are needed for each major structural material. Some sample experimental results are given for type 304 stainless steel and 2 1/4 Cr-1 Mo steel. (author)

Material properties requirements for LMFBR structural design: general considerations and data needs

International Nuclear Information System (INIS)

Pugh, C.E.; Purdy, C.M.

1977-01-01

A statement is given of material properties information needed in connection with the structural design technology for liquid-metal fast breeder reactor (LMFBR) primary circuit components. Implementation of current analysis methods and criteria is considered with an emphasis on data and data correlations for performing elastic-plastic and creep analyses, for establishing allowable stress limits, and for computing creep-fatigue damage. Further development of the technology is discussed in relation to properties information. Emphasis is placed on improved constitutive equations for representing inelastic material behavior, on procedures for treating time-dependent fatigue, and on criteria for creep rupture. The properties are generally discussed without regard to specific alloys, since most categories of information are needed for each major structural material. Some sample experimental results are given for type 304 stainless steel and 2 1 / 4 Cr-1 Mo steel

Considerations for Solar Energy Technologies to Make Progress Towards Grid Price Parity

Energy Technology Data Exchange (ETDEWEB)

Woodhouse, Michael; Fu, Ran; Chung, Donald; Horowitz, Kelsey; Remo, Timothy; Feldman, David; Margolis, Robert

2015-11-07

In this seminar the component costs for solar photovoltaics module and system prices will be highlighted. As a basis for comparison to other renewable and traditional energy options, the metric of focus will be total lifecycle cost-of-energy (LCOE). Several innovations to traditional photovoltaics technologies (including crystalline silicon, CdTe, and CIGS) and developing technologies (including organics and perovskites) that may close the gaps in LCOE will be discussed.

Parameters and design considerations for tomographic transmission scanners

International Nuclear Information System (INIS)

Pentlow, K.S.; Beattie, J.W.; Laughlin, J.S.

1976-01-01

The design of transverse axial transmission scanners for reconstruction tomography involves many interrelated parameters and conflicting requirements. We have investigated some of those parameters and their interactions and, where appropriate, attempted to optimize them. It is convenient to group the considerations under four headings: (1) Geometrical factors (basic configurations, rectilinear and fan geometry, moving detectors or static arrays, spatial response variations and field uniformity, and collimation); (2) Radiation energy and sources (Considerations here include transmission versus sensitivity, detector efficiency, collimator penetration, scattered radiation, patient dose, monochromatic versus polychromatic radiation and X-ray tubes versus radionuclide sources); (3) Detection systems (types of detector, detection modes and the rejection of scatter); and (4) Reconstruction mathematics and quantum noise. As a result of such considerations we have proposed a particular design which should have advantages in certain applications

16 CFR 1012.1 - General policy considerations; scope.

Science.gov (United States)

2010-01-01

... Policy, sets forth requirements for advance public notice, public attendance, and recordkeeping for... 16 Commercial Practices 2 2010-01-01 2010-01-01 false General policy considerations; scope. 1012.1 Section 1012.1 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL MEETINGS POLICY-MEETINGS...

Practical Considerations Informing Teachers' Technology Integration Decisions: The Case of Tablet PCs

Science.gov (United States)

Pareja Roblin, Natalie; Tondeur, Jo; Voogt, Joke; Bruggeman, Bram; Mathieu, Griet; van Braak, Johan

2018-01-01

The unique characteristics of tablet PCs promise important benefits for education. Yet, little is known about the rationale underlying teachers' decisions concerning their educational uses within the constraints of daily classroom practice. The current multiple case study investigated the practical considerations informing nine secondary school…

Gas power plant with CO2 handling. A study of alternative technologies

International Nuclear Information System (INIS)

Bolland, Olav; Hagen, Roger I.; Maurstad, Ola; Tangen, Grethe; Juliussen, Olav; Svendsen, Hallvard

2002-01-01

The report documents a study which compares 12 different technologies for gas power plants with CO 2 handling. The additional costs in removing the CO 2 in connection with electricity production is calculated to at least 18-19 oere /kWh compared to conventional gas power production without CO 2 capture. The calculated extra costs are somewhat higher than previously published figures. The difference is mainly due to that the estimated costs for pipelines and injection system for CO 2 are higher than in other studies. The removal of CO 2 in connection with gas power production implies increased use of natural gas. The most developed technologies would lead to a procentual increase in the gas consumption per kWh electricity of 18-25%. Gas power plants based on the present technologies would have efficiencies in the size of 46-49%. The efficiency of power plants without CO 2 handling is supposed to be 58%. There is no foundation for pointing out a ''winner's' among the compared technologies in the study. The present available technologies excepted, there are no technology which stands out as better than the others from an economic viewpoint. Gas turbine with membrane based separation of oxygen from air (AZEP) has a potential for lower costs but implies challenging technological development and thence considerable technological risks. Two technologies, capture of carbon from natural gas previous to combustion and exhaust gas purification based on absorption, may be employed in 3 - 4 years. The other technologies require more development and maturing. Three of the technologies may be particularly interesting because hydrogen may be produced as a byproduct. Demonstration plant and choice of technology: 1) There is a limited need for demonstration plants with respect to technology development. 2) It is important for the technology development to be able to test various technologies in a laboratory or in a flexible pilot plant. 3) Many technologies and components may be

Societal and economic valuation of technology-transfer deals

Science.gov (United States)

Holmes, Joseph S., Jr.

2009-09-01

The industrial adoption of concepts such as open innovation brings new legitimacy to activities technology-transfer professionals have conducted for over 20 years. This movement highlights the need for an increased understanding of the valuation of intellectual property (IP) and technology-transfer deals. Valuation, though a centerpiece of corporate finance, is more challenging when applied to the inherent uncertainty surrounding innovation. Technology-transfer professionals are often overwhelmed by the complexity and data requirements of valuation techniques and skeptical of their applicability to and utility for technology transfer. The market longs for an approach which bridges the gap between valuation fundamentals and technology-transfer realities. This paper presents the foundations of a simple, flexible, precise/accurate, and useful framework for considering the valuation of technology-transfer deals. The approach is predicated on a 12-factor model—a 3×4 value matrix predicated on categories of economic, societal, and strategic value. Each of these three categories consists of three core subcategories followed by a fourth "other" category to facilitate inevitable special considerations. This 12-factor value matrix provides a framework for harvesting data during deals and for the application of best-of-breed valuation techniques which can be employed on a per-factor basis. Future work will include framework implementation within a database platform.

Technological Criteria Technology-Environmental under a Systemic Approach: Chemistry Technology Transfer

Directory of Open Access Journals (Sweden)

Durán-García Martín Enrique

2014-07-01

Full Text Available Currently the transfer of chemical technology is a process that contributes to the technology policy of a country, an industry or an organization in general chemistry. This process requires the application of clear criteria for the proper development of the complex interrelations in the transfer of chemical technology. A group of criteria that are present, are those related to environmental technology which intrinsically define the technology and its impact to the environment. Therefore, the transfer of chemical technology requires technological-environmental criteria defining, in conjunction with other criteria, an adequate process for the selection, acquisition and incorporation of technology in a holistic perspective, so it provides feasible solutions the chemical industry in pursuit of their goals. Then the criterion becomes a benchmark for assessing an appropriate technology transfer process. We performed a theoretical analysis of the technological and environmental criteria, proposing thirty-six (36 technological-environmental criteria interrelated under a systemic approach in the process of transfer of chemical technology, focused on a methodological cycle first run, based primarily on the research-action method. Future research is expected to make a refinement of the criteria from the formulation and validation of metrics so that necessary adjustments are made to optimize the process of transfer of chemical technology.

IAEA Meeting to Highlight Technologies to Safely Manage Radioactive Waste

International Nuclear Information System (INIS)

2014-01-01

The two-day Forum was divided into four sessions that follow the journey of radioactive waste from its generation to final disposal: The first session provided an overview of the peaceful uses of nuclear technologies, the radioactive waste they generate, and of integrated management approaches adapted to various waste classes, as well as associated economic, security and safeguards considerations; The second session developed the steps required to manage radioactive waste before its disposal; The third illustrated disposal solutions for radioactive waste that must remain under regulatory control; and The fourth and final session focused on how evolving nuclear technologies, such as better use of nuclear fuel, innovative fuels and advanced reactors and fuel cycles, could affect future waste management needs

The role of advanced nuclear power technologies in developing countries: Criteria and design requirements

International Nuclear Information System (INIS)

1990-02-01

The document includes the papers presented at the following two technical committee meetings organized by the IAEA: Technical Committee Meeting and Workshop on Criteria for the Introduction of Advanced Nuclear Power Technologies for Specific Applications in Developing Countries, Vienna, 27-30 June 1988 (14 papers) and Technical Committee Meeting and Workshop on Design Requirements for the Application of Advanced Concepts in Developing Countries, Vienna, 6-9 December 1988 (16 papers). A separate abstract was prepared for each of these papers

Ethical Implications to the Assessment of the Smart Grid Technology in Russia

OpenAIRE

Makienko Marina A.; Kurkan Natalia V.; Emelyanenko Ekaterina E.

2017-01-01

This paper brings up the issue of staff training for professional development of the Smart Grid technology and for use of its elements by customers in households. It was revealed that the considerable part of the respondents was not familiar with the definition of Smart Grid. That required the development of communication skills by energy engineering students and their social activity as well. The reasons mentioned make actual the following elements of engineering education: social responsibi...

Stimulating R and D of industrial energy-efficient technology; the effect of government intervention on the development of strip casting technology

International Nuclear Information System (INIS)

Luiten, E.E.M.; Blok, Kornelis

2003-01-01

Strip casting technology in steel-making is known as an innovative energy-efficient technology. Stimulating the development (R and D) of such industrial process technologies is an appealing government intervention strategy for reducing greenhouse gas emissions. In this article, we analyse (a) the R and D trajectory of strip casting technology and (b) the effect of government intervention on the development of this particular energy-efficient technology. For this purpose we made a detailed investigation of the networks within which the technology was developed. The huge capital cost advantages of strip casting technology were already notified back in the 19th century. However, only after 1975 a robust technology network emerged. There is no single, simple determinant explaining the slow emergence of the technology network: the innovative technology had to become a more incremental improvement to the conventional production facilities before R and D was seriously pursued. Once the technology network emerged, it proved to have a strong momentum of itself. Steel firms maintained their confidence in the strategic cost advantages of the technology and persistently invested in up-scaling the technology. The effect of government intervention was minimal, because the technology network had its own strong momentum. All in all, R and D was only loosely influenced by energy-efficiency considerations or by government intervention. The major policy lesson is that information on technology networks and its momentum--in addition to classic information on energy-efficiency improvements and investments costs--is required to improve the effect of government intervention in the field of industrial energy-efficiency R and D and innovation

Regulatory considerations in the licensing of a mobile backscatter X-ray device used in security screening

International Nuclear Information System (INIS)

Scott, Jim; Railey, Leon

2008-01-01

This paper describes the regulatory and radiation protection issues taken into consideration in the licensing of a mobile security screening device which employs backscatter X-ray technology. The views expressed are those of the authors and are not the formal view of ARPANSA. The US standard ANSI N43.17 proposes doses limits for X-ray personnel security screening systems, viz. 0.1 μSv effective dose per scan; 250 μSv effective dose per year. The Z backscatter van TM satisfies the first criterion, as demonstrated by the independent measurements. Finally, if we assume an average effective dose of 0.1 μSv per scan, an individual would require to be scanned approximately 7 times per day, every day for a year in order to exceed the second dose limit of 250 μSv per year. This is considered extremely unlikely, and hence the van also meets the requirements of ANSI N43.17.

The Large UV/Optical/Infrared Surveyor (LUVOIR): Decadal Mission concept technology development overview

Science.gov (United States)

Bolcar, Matthew R.

2017-09-01

The Large Ultraviolet / Optical / Infrared (LUVOIR) Surveyor is one of four large mission concept studies being developed by NASA for consideration in the 2020 Astrophysics Decadal Survey. LUVOIR will support a broad range of science objectives, including the direct imaging and spectral characterization of habitable exoplanets around sun-like stars, the study of galaxy formation and evolution, the epoch of reionization, star and planet formation, and the remote sensing of Solar System bodies. The LUVOIR Science and Technology Definition Team (STDT) has tasked a Technology Working Group (TWG), with more than 60 members from NASA centers, academia, industry, and international partners, with identifying technologies that enable or enhance the LUVOIR science mission. The TWG has identified such technologies in the areas of Coronagraphy, Ultra-Stable Opto-mechanical Systems, Detectors, Coatings, Starshades, and Instrument Components, and has completed a detailed assessment of the state-of-the-art. We present here a summary of this technology assessment effort, as well as the current progress in defining a technology development plan to mature these technologies to the required technology readiness level (TRL).

What is required for the validation of in vitro assays for predicting contaminant relative bioavailability? Considerations and criteria

International Nuclear Information System (INIS)

Juhasz, Albert L.; Basta, Nicholas T.; Smith, Euan

2013-01-01

A number of studies have shown the potential of in vitro assays to predict contaminant in vivo relative bioavailability in order to refine human health exposure assessment. Although the term ‘validated’ has been used to describe the goodness of fit between in vivo and in vitro observations, its misuse has arisen from semantic considerations in addition to the lack of defined criteria for establishing performance validation. While several internal validation methods may be utilised, performance validation should preferably focus on assessing the agreement of model predictions with a set of data which are independent of those used to construct the model. In order to achieve robust validated predictive models, a number of parameters (e.g. size of data set, source of independent soils, contaminant concentration range, animal model, relative bioavailability endpoint) need to be considered in addition to defined criteria for establishing performance validation which are currently lacking. -- Defined criteria for establishing in vivo–in vitro performance validation are required in order to ensure robust, defensible predictive models for human health exposure assessment

Ionizing radiations in aseptic bottling: a comparison between technologies and safety requirements [beverages

International Nuclear Information System (INIS)

Bottani, E.; Rizzo, R.; Vignali, G.

2006-01-01

Ionizing radiations, commonly adopted in the medical field, are recently experiencing a wide diffusion in industrials applications. One of the most widespread uses of ionizing radiations refers to foodstuffs and packaging sterilization. In the aseptic bottling area, the application of this technology on polymeric caps is quickly developing. In such application, sterilization could be obtained with beta-rays, generated by an electron beam, or with gamma-rays, emitted by a radioactive source. After a brief explanation of physical properties of ionizing radiations, the aim of this paper is to discuss the use of radiations in aseptic bottling. Based on results available in literature, radiations effects on treated materials are discussed, as well as safety requirements aiming at reducing risks related to radiation exposure. Finally, sterilization plants with gamma and beta radiation are compared, with the aim of examining functioning principles and management complexity. As a result of the comparison between the two technologies, the electron beam (beta-rays) adoption for caps sterilization process proves to be preferable [it

Low water FGD technologies

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-11-15

Conventional flue gas desulphurisation (FGD) systems require large supplies of water. Technologies which reduce water usage are becoming more important with the large number of FGD systems being installed in response to ever tightening emission regulations. Reducing water loss is particularly important in arid regions of the world. This report reviews commercial and near commercial low water FGD processes for coal-fired power plants, including dry, semi-dry and multi-pollutant technologies. Wet scrubbers, the most widely deployed FGD technology, account for around 10–15% of the water losses in power plants with water cooling systems. This figure is considerably higher when dry/air cooling systems are employed. The evaporative water losses can be reduced by some 40–50% when the flue gas is cooled before it enters the wet scrubber, a common practice in Europe and Japan. Technologies are under development to capture over 20% of the water in the flue gas exiting the wet scrubber, enabling the power plant to become a water supplier instead of a consumer. The semi-dry spray dry scrubbers and circulating dry scrubbers consume some 60% less water than conventional wet scrubbers. The commercial dry sorbent injection processes have the lowest water consumption, consuming no water, or a minimal amount if the sorbent needs hydrating or the flue gas is humidified to improve performance. Commercial multi-pollutant systems are available that consume no water.

User requirements for innovative nuclear reactors and fuel cycle technologies in the area of economics, environment, safety, waste management, proliferation resistance and cross cutting issues, and methodology for innovative technologies assessment

International Nuclear Information System (INIS)

Kupitz, Juergen; Depisch, Frank; Allan, Colin

2003-01-01

The IAEA General Conference in 2000 has invited ''all interested Member States to combine their efforts under the aegis of the Agency in considering the issues of the nuclear fuel cycle, in particular by examining innovative and proliferation-resistant nuclear technology''. In response to this invitation, the IAEA initiated an ''International Project on Innovative Nuclear Reactors and Fuel Cycles'', INPRO. The overall objectives of INPRO is to help to ensure that nuclear energy is available to contribute in fulfilling in a sustainable manner energy needs in the 21st century, and to bring together all interested Member States, both technology holders and technology users, to consider jointly the international and national actions required to achieve desired innovations in nuclear reactors and fuel cycles that use sound and economically competitive technology. Phase-I of INPRO was initiated in May 2001. During Phase-I, work was subdivided in two sub phase: Phase 1A (finished in June 2003) and Phase 1B (started in June 2003). Phase 1A dealt with the definition of Basic Principles, User Requirements and Criteria, and the development of a methodology for the evaluation of innovative nuclear technologies. In Phase 1A, task groups for several areas were established: (a) Prospects and Potentials of Nuclear Power, (b) Economics; (c) Sustainability and Environment, (d) Safety of Nuclear Installations, (e) Waste Management, (f) Proliferation Resistance, (g) Crosscutting issues and (h) for the Methodology for Assessment. In Phase-IB evaluations of innovative nuclear energy technologies will be performed by Member States against the INPRO Basic Principles, User Requirements and Criteria. This paper summarizes the results achieved in the Phase 1A of INPRO and is a cooperative effort of the INPRO team, consisting of all INPRO cost free experts and task managers. (author)

Considerations for Future Climate Data Stewardship

Science.gov (United States)

Halem, M.; Nguyen, P. T.; Chapman, D. R.

2009-12-01

In this talk, we will describe the lessons learned based on processing and generating a decade of gridded AIRS and MODIS IR sounding data. We describe the challenges faced in accessing and sharing very large data sets, maintaining data provenance under evolving technologies, obtaining access to legacy calibration data and the permanent preservation of Earth science data records for on demand services. These lessons suggest a new approach to data stewardship will be required for the next decade of hyper spectral instruments combined with cloud resolving models. It will not be sufficient for stewards of future data centers to just provide the public with access to archived data but our experience indicates that data needs to reside close to computers with ultra large disc farms and tens of thousands of processors to deliver complex services on demand over very high speed networks much like the offerings of search engines today. Over the first decade of the 21st century, petabyte data records were acquired from the AIRS instrument on Aqua and the MODIS instrument on Aqua and Terra. NOAA data centers also maintain petabytes of operational IR sounders collected over the past four decades. The UMBC Multicore Computational Center (MC2) developed a Service Oriented Atmospheric Radiance gridding system (SOAR) to allow users to select IR sounding instruments from multiple archives and choose space-time- spectral periods of Level 1B data to download, grid, visualize and analyze on demand. Providing this service requires high data rate bandwidth access to the on line disks at Goddard. After 10 years, cost effective disk storage technology finally caught up with the MODIS data volume making it possible for Level 1B MODIS data to be available on line. However, 10Ge fiber optic networks to access large volumes of data are still not available from CSFC to serve the broader community. Data transfer rates are well below 10MB/s limiting their usefulness for climate studies. During

Soft-robotic arm inspired by the octopus: II. From artificial requirements to innovative technological solutions

International Nuclear Information System (INIS)

Mazzolai, B; Margheri, L; Cianchetti, M; Dario, P; Laschi, C

2012-01-01

Soft robotics is a current focus in robotics research because of the expected capability of soft robots to better interact with real-world environments. As a point of inspiration in the development of innovative technologies in soft robotics, octopuses are particularly interesting ‘animal models’. Octopus arms have unique biomechanical capabilities that combine significant pliability with the ability to exert a great deal of force, because they lack rigid structures but can change and control their degree of stiffness. The octopus arm motor capability is a result of the peculiar arrangement of its muscles and the properties of its tissues. These special abilities have been investigated by the authors in a specific study dedicated to identifying the key principles underlying these biological functions and deriving engineering requirements for robotics solutions. This paper, which is the second in a two-part series, presents how the identified requirements can be used to create innovative technological solutions, such as soft materials, mechanisms and actuators. Experiments indicate the ability of these proposed solutions to ensure the same performance as in the biological model in terms of compliance, elongation and force. These results represent useful and relevant components of innovative soft-robotic systems and suggest their potential use to create a new generation of highly dexterous, soft-bodied robots. (paper)

Nurses' perceptions of critical issues requiring consideration in the development of guidelines for professional registered nurse staffing for perinatal units.

Science.gov (United States)

Simpson, Kathleen Rice; Lyndon, Audrey; Wilson, Jane; Ruhl, Catherine

2012-01-01

To solicit input from registered nurse members of the Association of Women's Health, Obstetric and Neonatal Nurses (AWHONN) on critical considerations for review and revision of existing nurse staffing guidelines. Thematic analysis of responses to a cross-sectional on-line survey question: "Please give the staffing task force your input on what they should consider in the development of recommendations for staffing of perinatal units." Members of AWHONN (N = 884). Descriptions of staffing concerns that should be considered when evaluating and revising existing perinatal nurse staffing guidelines. Consistent themes identified included the need for revision of nurse staffing guidelines due to requirements for safe care, increases in patient acuity and complexity, invisibility of the fetus and newborn as separate and distinct patients, difficulties in providing comprehensive care during labor and for mother-baby couplets under current conditions, challenges in staffing small volume units, and the negative effect of inadequate staffing on nurse satisfaction and retention. Participants overwhelmingly indicated current nurse staffing guidelines were inadequate to meet the needs of contemporary perinatal clinical practice and required revision based on significant changes that had occurred since 1983 when the original staffing guidelines were published. © 2012 AWHONN, the Association of Women's Health, Obstetric and Neonatal Nurses.

This damned technology

International Nuclear Information System (INIS)

Steinbuch, K.

1982-01-01

Technology is not an end in itself, but a means to an end for human existence. If it does not serve this purpose it must be adapted or changed. Criticism of technology is necessary in view of the various positive and negative consequences of technology, it must however be based on judgement and sense of responsibility. It is however often claimed that technology and industry are the tools of the evil and that the technical intelligentsia do not feel responsible for psychological, social and political consequences of their doing. By contributions of several authors and of different periods this book elucidates the often grotesque contradictions between demagogic accusation of technology and the reality of technology; this book presents principal considerations on an acceptable assessment of technology. (HSCH) [de

An overview of Broadband Laser Ranging Architecture and Measurement Considerations

Science.gov (United States)

Daykin, Edward; La Lone, Brandon; Miller, Edward; Younk, Patrick; Bennett, Corey; Catenacci, Jared; LLNL BLR Development Group Collaboration; LANL BLR Development Group Collaboration

2017-06-01

Broadband Laser Ranging (BLR) is a developmental diagnostic intended to measure the position of rapidly moving surfaces in combination with optical velocimetry. Design and employment of a BLR diagnostic on dynamic experiments requires consideration for both the inherent measurement system tradeoffs as well as architectural choices appropriate to the nature of investigation. The diagnostic uses spectral interferometry to measure distance by mapping femtosecond laser pulses to the time domain via chromatic dispersion within the fiber-optic architecture. The system parameters and governing equations that describe measurement range, resolution, and Doppler sensitivity will be discussed. We will also briefly review the impact of diagnostic architectural choices including: nature of interferometer, Interferometric dispersion matching, optical amplification, integration of optical velocimetry, BLR calibration, and field operability. To summarize we will present the architectural and operational approach currently being pursued by NSTec within an on-going collaboration between NSTec, Lawrence Livermore and Los Alamos National Labs. This work was done by National Security Technologies, LLC, under Contract No. DE-AC52-06NA25946 with the U.S. Department of Energy.

Hackers against technology: Critique and recuperation in technological cycles.

Science.gov (United States)

Maxigas

2017-12-01

I offer an interpretation of hackers' technological choices through a theoretical framework of critique and recuperation in technological cycles, building on prior research that brings the pragmatic sociology of Boltanski and Chiapello to bear on matters in Science and Technology Studies. I argue that contextualizing technology choices in the development of capitalism through innovation illuminates their political significance. I start with the counterintuitive observation that some browser extensions popular with hackers, like RequestPolicy, make it considerably harder for them to look at websites. This observation showcases the Luddite aspects of hackerdom, in that they are willing to 'break' popular websites that would otherwise cheat on the user. In line with an undercurrent of hacker studies, in this case study I find hackers fighting technological progress they see as social decline.

Integrating speech technology to meet crew station design requirements

Science.gov (United States)

Simpson, Carol A.; Ruth, John C.; Moore, Carolyn A.

The last two years have seen improvements in speech generation and speech recognition technology that make speech I/O for crew station controls and displays viable for operational systems. These improvements include increased robustness of algorithm performance in high levels of background noise, increased vocabulary size, improved performance in the connected speech mode, and less speaker dependence. This improved capability makes possible far more sophisticated user interface design than was possible with earlier technology. Engineering, linguistic, and human factors design issues are discussed in the context of current voice I/O technology performance.

Considerations for closure of low-level radioactive waste engineered disposal facilities

International Nuclear Information System (INIS)

1992-01-01

Proper stabilization and closure of low-level radioactive waste disposal facilities require detailed planning during the early stages of facility development. This report provides considerations for host States, compact regions, and unaffiliated States on stabilization and closure of engineered low-level radioactive waste and mixed waste disposal facilities. A time line for planning closure activities, which identifies closure considerations to be addressed during various stages of a facility's development, is presented. Current Federal regulatory requirements and guidance for closure and post-closure are outlined. Significant differences between host State and Federal closure requirements are identified. Design features used as stabilization measures that support closure, such as waste forms and containers, backfill materials, engineered barrier systems, and site drainage systems, are described. These design features are identified and evaluated in terms of how they promote long-term site stability by minimizing water infiltration, controlling subsidence and surface erosion, and deterring intrusion. Design and construction features critical to successful closure are presented for covers and site drainage. General considerations for stabilization and closure operations are introduced. The role of performance and environmental monitoring during closure is described

Some Sociological Contexts for Consideration When Designing a School Puberty/Sexuality Curriculum

Science.gov (United States)

Collier-Harris, Christine A.; Goldman, Juliette D. G.

2017-01-01

Sociological contexts are key factors in education and schooling. Contemporary contexts of world-view, or "Weltanschauungen," such as human rights, public health, demographics, biosocial factors including earlier puberty and a developmentalist approach, and technological connectivity, warrant significant professional consideration by…

Meteorological considerations in emergency response capability at nuclear power plant

International Nuclear Information System (INIS)

Fairobent, J.E.

1985-01-01

Meteorological considerations in emergency response at nuclear power plants are discussed through examination of current regulations and guidance documents, including discussion of the rationale for current regulatory requirements related to meteorological information for emergency response. Areas discussed include: major meteorological features important to emergency response; onsite meteorological measurements programs, including redundant and backup measurements; access to offsite sources of meteorological information; consideration of real-time and forecast conditions and atmospheric dispersion modeling

Technology survey for real-time monitoring of plutonium in a vitrifier off-gas system

International Nuclear Information System (INIS)

Berg, J.M.; Veirs, D.K.

1996-01-01

We surveyed several promising measurement technologies for the real-time monitoring of plutonium in a vitrifier off-gas system. The vitrifier is being developed by Westinghouse Savannah River Corp. and will be used to demonstrate vitrification of plutonium dissolved in nitric acid for fissile material disposition. The risk of developing a criticality hazard in the off-gas processing equipment can be managed by using available measurement technologies. We identified several potential technologies and methods for detecting plutonium that are sensitive enough to detect the accumulation of a mass sufficient to form a criticality hazard. We recommend gross alpha-monitoring technologies as the most promising option for Westinghouse Savannah River Corp. to consider because that option appears to require the least additional development. We also recommend further consideration for several other technologies because they offer specific advantages and because gross alpha-monitoring could prove unsuitable when tested for this specific application

Design consideration for dc SQUIDs fabricated in deep sub-micron technology

International Nuclear Information System (INIS)

Ketchen, M.B.

1991-01-01

Design rules for scaling dc SQUID junctions to optimize SQUID performance have been well known for over a decade, and verified down to the sub-micron regime. Practical SQUIDs having well coupled input coils of usable inductance have generally been fabricated at the 2-5 μm level of lithography. Other technologies, silicon in particular, are now routinely practiced at the 0.5 μm level of lithography with impressive demonstrations at the 0.1-0.25 μm level not uncommon. In this paper the implications of applying such fabrication capability to advance dc SQUID technology are explored. In particular the issues of scaling practical dc SQUIDs down to the 0.1-0.25 μm regime are examined, using as a prototype design the basic washer SQUID with a spiral input coil

System design considerations for fast-neutron interrogation systems

International Nuclear Information System (INIS)

Micklich, B.J.; Curry, B.P.; Fink, C.L.; Smith, D.L.; Yule, T.J.

1993-01-01

Nonintrusive interrogation techniques that employ fast neutrons are of interest because of their sensitivity to light elements such as carbon, nitrogen, and oxygen. The primary requirement of a fast-neutron inspection system is to determine the value of atomic densities, or their ratios, over a volumetric grid superimposed on the object being interrogated. There are a wide variety of fast-neutron techniques that can provide this information. The differences between the various nuclear systems can be considered in light of the trade-offs relative to the performance requirements for each system's components. Given a set of performance criteria, the operational requirements of the proposed nuclear systems may also differ. For instance, resolution standards will drive scanning times and tomographic requirements, both of which vary for the different approaches. We are modelling a number of the fast-neutron interrogation techniques currently under consideration, to include Fast Neutron Transmission Spectroscopy (FNTS), Pulsed Fast Neutron Analysis (PFNA), and its variant, 14-MeV Associated Particle Imaging (API). The goals of this effort are to determine the component requirements for each technique, identify trade-offs that system performance standards impose upon those component requirements, and assess the relative advantages and disadvantages of the different approaches. In determining the component requirements, we will consider how they are driven by system performance standards, such as image resolution, scanning time, and statistical uncertainty. In considering the trade-offs between system components, we concentrate primarily on those which are common to all approaches, for example: source characteristics versus detector array requirements. We will then use the analysis to propose some figures-of-merit that enable performance comparisons between the various fast-neutron systems under consideration. The status of this ongoing effort is presented

Design considerations: gas turbines for electric power generation

International Nuclear Information System (INIS)

Moon, D.M.

1979-01-01

The gas turbine represents one of the most sophisticated designs from the standpoint of time dependent deformation behavior. The large size of the equipment, which limits the amount of full scale testing, together with the demanding performance requirements and high level of reliability desired places a high degree of emphasis on the high temperature deformation design process. As an example of the various design considerations used in this equipment, a brief overview of the turbine will be given, highlighting the materials, stress, temperatures, and load history experienced by the major components. Particular attention will then be focused on the vane segment design considerations. This component is not only structurally complicated, but experiences steep temperature gradients imposed by internal cooling and large temperature transients during cyclic duty operation which have to be addressed in the design procedure. Based on this discussion the limitations of the current design procedures will be highlighted and the areas requiring additional research inputs will be discussed

Practical considerations in developing an instrument-maintenance plan--

International Nuclear Information System (INIS)

Guth, M.A.S.

1989-01-01

The author develops a general set of considerations to explain how a consistent, well-organized, prioritized, and adequate time-allowance program plan for routine maintenance can be constructed. The analysis is supplemented with experience from the high flux isotope reactor (HFIR) at US Oak Ridge National Laboratory (ORNL). After the preventive maintenance (PM) problem was defined, the instruments on the schedule were selected based on the manufacturer's design specifications, quality-assurance requirements, prior classifications, experiences with the incidence of breakdowns or calibration, and dependencies among instruments. The effects of repair error in PM should be also studied. The HFIR requires three full-time technicians to perform both PM and unscheduled maintenance. A review is presented of concepts from queuing theory to determine anticipated breakdown patterns. In practice, the pneumatic instruments have a much longer lifetime than the electric/electronic instruments on various reactors at ORNL. Some special considerations and risk aversion in choosing a maintenance schedule

Implementation of electronic medical records requires more than new software: Lessons on integrating and managing health technologies from Mbarara, Uganda.

Science.gov (United States)

Madore, Amy; Rosenberg, Julie; Muyindike, Winnie R; Bangsberg, David R; Bwana, Mwebesa B; Martin, Jeffrey N; Kanyesigye, Michael; Weintraub, Rebecca

2015-12-01

Implementation lessons: • Technology alone does not necessarily lead to improvement in health service delivery, in contrast to the common assumption that advanced technology goes hand in hand with progress. • Implementation of electronic medical record (EMR) systems is a complex, resource-intensive process that, in addition to software, hardware, and human resource investments, requires careful planning, change management skills, adaptability, and continuous engagement of stakeholders. • Research requirements and goals must be balanced with service delivery needs when determining how much information is essential to collect and who should be interfacing with the EMR system. • EMR systems require ongoing monitoring and regular updates to ensure they are responsive to evolving clinical use cases and research questions. • High-quality data and analyses are essential for EMRs to deliver value to providers, researchers, and patients. Copyright © 2015 Elsevier Inc. All rights reserved.

Climate change, insurance, and the buildings sector: Technological synergisms between adaptation and mitigation

Energy Technology Data Exchange (ETDEWEB)

Mills, Evan

2002-11-01

Examining the intersection of risk analysis and sustainable energy strategies reveals numerous examples of energy efficient and renewable energy technologies that offer insurance loss-prevention benefits. The growing threat of climate change provides an added motivation for the risk community to better understand this area of opportunity. While analyses of climate change mitigation typically focus on the emissions-reduction characteristics of sustainable energy technologies, less often recognized are a host of synergistic ways in which these technologies also offer adaptation benefits, e.g. making buildings more resilient to natural disasters. While there is already some relevant activity, there remain various barriers to significantly expanding these efforts. Achieving successful integration of sustainable energy considerations with risk-management objectives requires a more proactive orientation, and coordination among diverse actors and industry groups.

Climate change, insurance and the building sector: technological synergisms between adaptation and mitigation

International Nuclear Information System (INIS)

Mills, E.

2003-01-01

Examining the intersection of risk analysis and sustainable energy strategies reveals numerous examples of energy-efficient and renewable energy technologies that offer insurance loss-prevention benefits. The growing threat of climate change provides an added motivation for the risk community to understand better this area of opportunity. While analyses of climate change mitigation typically focus on the emissions-reduction characteristics of sustainable energy technologies, less often recognised are a host of synergistic ways in which these technologies also offer adaptation benefits, e.g. making buildings more resilient to natural disasters. While there is already some relevant activity, there remain various barriers to expanding these efforts significantly. Achieving successful integration of sustainable energy considerations with risk-management objectives requires a more proactive orientation, and coordination among diverse actors and industry groups. (author)

Technological stigmatism, risk perception, and truth

International Nuclear Information System (INIS)

Garrick, B.John

1998-01-01

Technological stigmas can be a source of confusion and misunderstandings of the effect on public health and safety of technological activities. The result can be a gross waste of national resources to fix the 'stigma' rather than the real problem. Fueling technological stigmas has become a visible activity, especially among non-technical professionals. Further, it is not clear that these same critics are accountable for their influence on policy and practices that may adversely affect people's lives and financial resources. Their bad news of alleged high risk and incompetent technologists is more appealing to the press than the more technical and apparently boring news of finding engineering solutions to real problems. The issue of technological stigma is especially visible in relation to the environmental and safety effects of the nuclear and chemical industries. These industries are in an extremely defensive position because the stigmatizes put much more emphasis on their risks than on their benefits to society. There is the genuine threat of the denial of important technologies in the nuclear and chemical fields and a resulting loss of lives and resources. The actions required to better tell the whole cost-risk-benefit story of specific technologies have to come from all of the groups involved. The critics and stigmatizers need to be more accountable for their assertions, the technologists need to involve the public more in their consideration of technological solutions to environmental and safety issues, and the press needs to present all of the facts rather than just the sensational or 'outrage' part of the story

75 FR 62515 - Notice of Availability of Report on the Communications Requirements of Smart Grid Technologies

Science.gov (United States)

2010-10-12

...Through this notice, the Department of Energy (DOE) announces the availability of its report entitled, ``Communications Requirements of Smart Grid Technologies.'' In this report, DOE sets forth recommendations and observations on current and potential communications requirements of the Smart Grid, as well as the types of networks and communications services that may be used. DOE also provides a comprehensive summary of the comments received in response to a Request for Information and during a public meeting conducted during the preparation of the report. This report responds to recommendations for DOE set forth in the National Broadband Plan authored by the Federal Communications Commission at the direction of Congress.

FORMING ORGANIZATIONAL SKILLS OF PROSPECTIVE TEACHERS OF THE HUMANITIES USING INFORMATION AND COMMUNICATION TECHNOLOGIES

OpenAIRE

Olena A. Zymovets

2014-01-01

The article deals with the problem of formation of prospective humanitarian teachers’ organizational skills in the Information Society. The author defines organizational skills of prospective teachers of the Humanities, specifies the types of these skills taking into consideration the requirements of the Information Society and focuses on the role of Information and Communication Technologies in the process of their formation. The author suggests the system of ICT-oriented tasks for the forma...

PHYSICAL RESOURCES OF INFORMATION PROCESSES AND TECHNOLOGIES

Directory of Open Access Journals (Sweden)

Mikhail O. Kolbanev

2014-11-01

Full Text Available Subject of study. The paper describes basic information technologies for automating of information processes of data storage, distribution and processing in terms of required physical resources. It is shown that the study of these processes with such traditional objectives of modern computer science, as the ability to transfer knowledge, degree of automation, information security, coding, reliability, and others, is not enough. The reasons are: on the one hand, the increase in the volume and intensity of information exchange in the subject of human activity and, on the other hand, drawing near to the limit of information systems efficiency based on semiconductor technologies. Creation of such technologies, which not only provide support for information interaction, but also consume a rational amount of physical resources, has become an actual problem of modern engineering development. Thus, basic information technologies for storage, distribution and processing of information to support the interaction between people are the object of study, and physical temporal, spatial and energy resources required for implementation of these technologies are the subject of study. Approaches. An attempt is made to enlarge the possibilities of traditional cybernetics methodology, which replaces the consideration of material information component by states search for information objects. It is done by taking explicitly into account the amount of physical resources required for changes in the states of information media. Purpose of study. The paper deals with working out of a common approach to the comparison and subsequent selection of basic information technologies for storage, distribution and processing of data, taking into account not only the requirements for the quality of information exchange in particular subject area and the degree of technology application, but also the amounts of consumed physical resources. Main findings. Classification of resources

Climate Change and Requirement of Transfer of Environmentally Sound Technology

DEFF Research Database (Denmark)

Uddin, Mahatab

that developed the technology, to another that adopts, adapts, and uses it. As different kinds of threats posed by climate change are continuously increasing all over the world the issue of “technology transfer” especially the transfer of environmentally sound technologies has become one of the key topics...

Scaling considerations for modeling the in situ vitrification process

International Nuclear Information System (INIS)

Langerman, M.A.; MacKinnon, R.J.

1990-09-01

Scaling relationships for modeling the in situ vitrification waste remediation process are documented based upon similarity considerations derived from fundamental principles. Requirements for maintaining temperature and electric potential field similarity between the model and the prototype are determined as well as requirements for maintaining similarity in off-gas generation rates. A scaling rationale for designing reduced-scale experiments is presented and the results are assessed numerically. 9 refs., 6 figs

Structural design considerations for an 8-m space telescope

Science.gov (United States)

Arnold, William r., Sr.; Stahl, H. Philip

2009-08-01

NASA's upcoming ARES V launch vehicle, with its' immense payload capacities (both volume and mass) has opened the possibilities for a whole new paradigm of space observatories. It becomes practical to consider a monolith mirror of sufficient size to permit significant scientific advantages, both in collection area and smoothness or figure at a reasonable price. The technologies and engineering to manufacture and test 8 meter class monoliths is mature, with nearly a dozen of such mirrors already in operation around the world. This paper will discuss the design requirements to adapt an 8m meniscus mirror into a Space Telescope System, both launch and operational considerations are included. With objects this massive and structurally sensitive, the mirror design must include all stages of the process. Based upon the experiences of the Hubble Space Telescope, testing and verification at both component and integrated system levels are considered vital to mission success. To this end, two different component level test methods for gravity sag (the so call zero- gravity simulation or test mount) are proposed, with one of these methods suitable for the full up system level testing as well.

Smart gun technologies: One method of eliminating unauthorized firearm use

Energy Technology Data Exchange (ETDEWEB)

Weiss, D.R.

1994-06-01

Law enforcement officers work each day with individuals who can become aggressive and violent. Among the worst scenarios, which occur each year and often raise national media attention, an officer has his handgun taken away and used against him. As many as 12 officers per year are killed with their own gun. This problem can be addressed through the integration of modern sensors with control electronics to provide authorized user firearms for law enforcement and even recreational uses. A considerable benefit to law enforcement agencies, as well as society as a whole, would be gained by the application of recommended Smart Gun Technologies (SGT) as a method of limiting the use of firearms to authorized individuals. Sandia National Laboratory has been actively involved in the research and design of technologically sophisticated surety devices for weapons for the DOE and DOD. This experience is now being applied to criminal justice problems by transferring these technologies to commercial industry. In the SGT project Sandia is developing the user requirements that would limit a firearms use to its owner and/or authorized users. Various technologies that are capable of meeting the requirements are being investigated, these range from biometrics identification to radio-controlled devices. Research is presently underway to investigate which technologies represent the best solutions to the problem. Proof of concept demonstration models are being built for the most promising SGT with the intent of technology transfer. Different solutions are recommended for the possible applications: law enforcement, military, and commercial (personal protection/recreational) use.

Overview of bladder heating technology: matching capabilities with clinical requirements

Science.gov (United States)

Stauffer, Paul R.; van Rhoon, Gerard C.

2016-01-01

Moderate temperature hyperthermia (40–450°C for one hour) is emerging as an effective treatment to enhance best available chemotherapy strategies for bladder cancer. A rapidly increasing number of clinical trials have investigated the feasibility and efficacy of treating bladder cancer with combined intravesical chemotherapy and moderate temperature hyperthermia. To date, most studies have concerned treatment of non-muscle invasive bladder cancer (NMIBC) limited to the interior wall of the bladder. Following the promising results of initial clinical trials, investigators are now considering protocols for treatment of muscle invasive bladder cancer (MIBC). This paper provides a brief overview of the devices and techniques used for heating bladder cancer. Systems are described for thermal conduction heating of bladder wall via circulation of hot fluid, intravesical microwave antenna heating, capacitively coupled RF current heating, and radiofrequency phased array deep regional heating of the pelvis. Relative heating characteristics of the available technologies are compared based on published feasibility studies, and the systems correlated with clinical requirements for effective treatment of MIBC and NMIBC. PMID:26939993

Considerations in implementing integrated biomass energy systems in developing countries

International Nuclear Information System (INIS)

Perlack, R.D.; Ranney, J.W.

1993-01-01

Biomass energy is emerging as a real option for satisfying power needs in developing countries. Experience has shown improvements in GDP are directly linked to increased consumption of energy. Biomass energy can also be environmentally and developmentally beneficial where it will be both grown and used. Biomass production can offset deforestation, reduce soil erosion, increase rural employment, and stimulate development. Moreover, when biomass is grown renewably there is no net buildup of atmospheric carbon. Issues and barriers associated with implementing integrated biomass energy systems in developing countries are discussed. An integrated biomass energy system is dependent on sustainably grown and managed energy crops, supportive of rural development, and environmentally beneficial, adapted to local conditions; takes advantage of by- and co-products and uses conversion technologies that have been optimized for biomass. A preliminary evaluation of a biomass to electricity project relying on plantation grown feedstocks in Southwest China indicates that biomass could be grown and converted to electricity at costs lower than alternatives and yield an internal rate of return of about 15%. The IRR based on a social and environmental benefits are substantial and investment in the facility is well-justified. However, assessing biomass energy systems is exceedingly complex. Considerations are grouped into biomass production, biomass logistics and transport, and biomass conversion. Implementation requires considerations of energy and economics, institutional and social issues, and environmental issues. The conclusion that such a project would be viable in rural China is shadowed by many site-specific circumstances and highlights the need for systematic and integrated appraisal

Investing in New Technology in Pulmonary Medicine: Navigating the Tortuous Path to Success.

Science.gov (United States)

Kruklitis, Robert; French, Kim; Cangelosi, Michael Joseph; Kovitz, Kevin L

2017-09-01

The introduction of new technologies offers the promise to advance medicine. This occurs alongside improved efforts to control costs of health care by hospital administrators, the Centers for Medicare & Medicaid Services' (CMS) pivot to value programs, and commercial payers' efforts to reduce reimbursement. These trends present a challenge for the pulmonologist, among others, who must navigate increasingly complex and highly scrutinized evaluation processes used to secure new technology (NT). Health-care providers are turning toward value assessments while simultaneously tasked with the mission of offering state of the art technologies and services. Pulmonologists desiring NT are thus faced with increased scrutiny in their evaluation of costs and clinical data to support investments. Consideration of this scrutiny and further evidence to temper the evaluation will improve the likelihood of adoption and patient access to clinically impactful technology. The identification of this evidence may provide a comprehensive view of the clinical and economic benefits of such technologies to both administrators and pulmonary clinicians. It is imperative that all parties involved in the decision process work collaboratively to deploy value added and clinically impactful technologies. Although a physician group might invest in such NT, the capital required often leads such decisions to a larger organization such as a hospital, health-care system, or privately owned entity. This article aims to provide a framework for pulmonary clinicians to better understand the processes that purchasers use to evaluate NT, the pressures that influence their consideration, and what resources may be leveraged toward success. Copyright © 2017 American College of Chest Physicians. Published by Elsevier Inc. All rights reserved.

@selfhealthtech: Using self-administered health monitoring technologies to support the self-management of long-term conditions: what about behaviour change?

Directory of Open Access Journals (Sweden)