WorldWideScience

Sample records for technologies program integration

  1. Characterization, Monitoring and Sensor Technology Integrated Program

    Energy Technology Data Exchange (ETDEWEB)

    1993-04-01

    This booklet contains summary sheets that describe FY 1993 characterization, monitoring, and sensor technology (CMST) development projects. Currently, 32 projects are funded, 22 through the OTD Characterization, Monitoring, and Sensor Technology Integrated Program (CMST-IP), 8 through the OTD Program Research and Development Announcement (PRDA) activity managed by the Morgantown Energy Technology Center (METC), and 2 through Interagency Agreements (IAGs). This booklet is not inclusive of those CMST projects which are funded through Integrated Demonstrations (IDs) and other Integrated Programs (IPs). The projects are in six areas: Expedited Site Characterization; Contaminants in Soils and Groundwater; Geophysical and Hydrogeological Measurements; Mixed Wastes in Drums, Burial Grounds, and USTs; Remediation, D&D, and Waste Process Monitoring; and Performance Specifications and Program Support. A task description, technology needs, accomplishments and technology transfer information is given for each project.

  2. Integrating Technology into Teacher Preparation Programs.

    Science.gov (United States)

    Metze, Leroy; Hayes, Mike; Eakles, David; Murley, Tim

    During the spring of 1992, a partnership between Western Kentucky University, Jostens' Learning Corporation, and three school districts was formed for the purpose of developing an implementation model for the integration of technology into teacher education. Following integrated instruction on the university campus and the partnership schools,…

  3. In Situ Remediation Integrated Program: Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-01

    The In Situ Remediation Integrated Program (ISR IP) was instituted out of recognition that in situ remediation could fulfill three important criteria: significant cost reduction of cleanup by eliminating or minimizing excavation, transportation, and disposal of wastes; reduced health impacts on workers and the public by minimizing exposure to wastes during excavation and processing; and remediation of inaccessible sites, including: deep subsurfaces, in, under, and around buildings. Buried waste, contaminated soils and groundwater, and containerized wastes are all candidates for in situ remediation. Contaminants include radioactive wastes, volatile and non-volatile organics, heavy metals, nitrates, and explosive materials. The ISR IP intends to facilitate development of in situ remediation technologies for hazardous, radioactive, and mixed wastes in soils, groundwater, and storage tanks. Near-term focus is on containment of the wastes, with treatment receiving greater effort in future years. ISR IP is an applied research and development program broadly addressing known DOE environmental restoration needs. Analysis of a sample of 334 representative sites by the Office of Environmental Restoration has shown how many sites are amenable to in situ remediation: containment--243 sites; manipulation--244 sites; bioremediation--154 sites; and physical/chemical methods--236 sites. This needs assessment is focused on near-term restoration problems (FY93--FY99). Many other remediations will be required in the next century. The major focus of the ISR EP is on the long term development of permanent solutions to these problems. Current needs for interim actions to protect human health and the environment are also being addressed.

  4. Two Inseparable Facets of Technology Integration Programs: Technology and Theoretical Framework

    Science.gov (United States)

    Demir, Servet

    2011-01-01

    This paper considers the process of program development aiming at technology integration for teachers. For this consideration, the paper focused on an integration program which was recently developed as part of a larger project. The participants of this program were 45 in-service teachers. The program continued four weeks and the conduct of the…

  5. Two Inseparable Facets of Technology Integration Programs: Technology and Theoretical Framework

    Science.gov (United States)

    Demir, Servet

    2011-01-01

    This paper considers the process of program development aiming at technology integration for teachers. For this consideration, the paper focused on an integration program which was recently developed as part of a larger project. The participants of this program were 45 in-service teachers. The program continued four weeks and the conduct of the…

  6. Integrating New Technologies and Existing Tools to Promote Programming Learning

    Directory of Open Access Journals (Sweden)

    Álvaro Santos

    2010-04-01

    Full Text Available In recent years, many tools have been proposed to reduce programming learning difficulties felt by many students. Our group has contributed to this effort through the development of several tools, such as VIP, SICAS, OOP-Anim, SICAS-COL and H-SICAS. Even though we had some positive results, the utilization of these tools doesn’t seem to significantly reduce weaker student’s difficulties. These students need stronger support to motivate them to get engaged in learning activities, inside and outside classroom. Nowadays, many technologies are available to create contexts that may help to accomplish this goal. We consider that a promising path goes through the integration of solutions. In this paper we analyze the features, strengths and weaknesses of the tools developed by our group. Based on these considerations we present a new environment, integrating different types of pedagogical approaches, resources, tools and technologies for programming learning support. With this environment, currently under development, it will be possible to review contents and lessons, based on video and screen captures. The support for collaborative tasks is another key point to improve and stimulate different models of teamwork. The platform will also allow the creation of various alternative models (learning objects for the same subject, enabling personalized learning paths adapted to each student knowledge level, needs and preferential learning styles. The learning sequences will work as a study organizer, following a suitable taxonomy, according to student’s cognitive skills. Although the main goal of this environment is to support students with more difficulties, it will provide a set of resources supporting the learning of more advanced topics. Software engineering techniques and representations, object orientation and event programming are features that will be available in order to promote the learning progress of students.

  7. Part 2 -- current program integrating strategies and lubrication technology

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, B.

    1996-12-01

    This paper is the second of two that describe the Predictive Maintenance Program for rotating machinery at the Palo Verde Nuclear Generating Station. The Predictive Maintenance program has been enhanced through organizational changes and improved interdisciplinary usage of technology. This paper will discuss current program strategies that have improved the interaction between the Vibration and Lube Oil programs. The {open_quotes}Lube Oil{close_quotes} view of the combined program along with case studies will then be presented.

  8. Critical Issues Forum: A multidisciplinary educational program integrating computer technology

    Energy Technology Data Exchange (ETDEWEB)

    Alexander, R.J.; Robertson, B.; Jacobs, D. [Los Alamos National Lab., NM (United States)

    1998-09-01

    The Critical Issues Forum (CIF) funded by the US Department of Energy is a collaborative effort between the Science Education Team of Los Alamos National Laboratory (LANL) and New Mexico high schools to improve science education throughout the state of New Mexico as well as nationally. By creating an education relationship between the LANL with its unique scientific resources and New Mexico high schools, students and teachers participate in programs that increase not only their science content knowledge but also their critical thinking and problem-solving skills. The CIF program focuses on current, globally oriented topics crucial to the security of not only the US but to that of all nations. The CIF is an academic-year program that involves both teachers and students in the process of seeking solutions for real world concerns. Built around issues tied to LANL`s mission, participating students and teachers are asked to critically investigate and examine the interactions among the political, social, economic, and scientific domains while considering diversity issues that include geopolitical entities and cultural and ethnic groupings. Participants are expected to collaborate through telecommunications during the research phase and participate in a culminating multimedia activity, where they produce and deliver recommendations for the current issues being studied. The CIF was evaluated and found to be an effective approach for teacher professional training, especially in the development of skills for critical thinking and questioning. The CIF contributed to students` ability to integrate diverse disciplinary content about science-related topics and supported teachers in facilitating the understanding of their students using the CIF approach. Networking technology in CIF has been used as an information repository, resource delivery mechanism, and communication medium.

  9. Characterization, Monitoring, and Sensor Technology Integrated Program (CMST-IP). Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    The Characterization, Monitoring, and Sensor Technology Integrated Program seeks to deliver needed technologies, timely and cost-effectively, to the Office of Waste Management (EM-30), the Office of Environmental Restoration (EM-40), and the Office of Facility Transition and Management (EM-60). The scope of characterizations monitoring, and sensor technology needs that are required by those organizations encompass: (1) initial location and characterization of wastes and waste environments - prior to treatment; (2) monitoring of waste retrieval, remediation and treatment processes; (3) characterization of the co-position of final waste treatment forms to evaluate the performance of waste treatments processes; and (4) site closure and compliance monitoring. Wherever possible, the CMST-IP fosters technology transfer and commercialization of technologies that it sponsors.

  10. Technology Integration: A Research-Based Professional Development Program

    Science.gov (United States)

    Faulder, Tori Rose

    2011-01-01

    This research-based thesis project explains the governmental acts and policies, investors, and other stakeholders who have worked to promote, question, and explore the use of information and communication technologies (ICT) in the classroom. Research suggests that best-practice ICT integration requires using ICT alongside constructivist pedagogy.…

  11. Integration Of Innovative Technologies And Affective Teaching amp Learning In Programming Courses

    Directory of Open Access Journals (Sweden)

    Alvin Prasad

    2015-08-01

    Full Text Available Abstract Technology has been integral component in the teaching and learning process in this millennium. In this review paper we evaluate the different technologies which are used to currently facilitate the teaching and learning of computer programming courses. The aim is to identify problems or gaps in technology usage in the learning environment and suggest affective solutions for technology integration into programming courses at the University levels in the future. We believe that with the inclusion of suggested innovative technologies and affective solutions in programming courses teaching and learning will be attractive and best for the programming industry.

  12. Impact of a Sustained Job-Embedded Professional Development Program on Classroom Technology Integration

    Science.gov (United States)

    Grashel, Mark A.

    2014-01-01

    The purpose of this single case study was to examine a grant-funded program of professional development (PD) at a small rural high school in Ohio. Evidence has shown that the current model of technology professional development in-service sessions has had little impact on classroom technology integration. This PD program focused on 21st Century…

  13. Shifting Views: Exploring the Potential for Technology Integration in Early Childhood Education Programs

    Science.gov (United States)

    Dietze, Beverlie; Kashin, Diane

    2013-01-01

    Using technology with children in play-based early learning programs creates questions for some within the Early Childhood Education (ECE) community. This paper presents how two faculty who teach in ECE-related degree programs integrated educational technology into their teaching pedagogy as a way to model to their students how it can be used to…

  14. In Situ Remediation Integrated Program, Evaluation and assessment of containment technology

    Energy Technology Data Exchange (ETDEWEB)

    Gerber, M.A.; Fayer, M.J.

    1994-04-01

    The In Situ Remediation Integrated Program (ISRIP) was established by the US Department of Energy (DOE) to advance the state-of-the art of innovative in situ remediation technologies to the point of demonstration and to broaden the applicability of these technologies to the widely varying site remediation requirements throughout the DOE complex. This program complements similar ongoing integrated demonstration programs being conducted at several DOE sites. The ISRIP has been conducting baseline assessments on in situ technologies to support program planning. Pacific Northwest Laboratory conducted an assessment and evaluation of subsurface containment barrier technology in support of ISRIP`s Containment Technology Subprogram. This report summarizes the results of that activity and provides a recommendation for priortizing areas in which additional research and development is needed to advance the technology to the point of demonstration in support of DOE`s site restoration activities.

  15. Let's get technical: Enhancing program evaluation through the use and integration of internet and mobile technologies.

    Science.gov (United States)

    Materia, Frank T; Miller, Elizabeth A; Runion, Megan C; Chesnut, Ryan P; Irvin, Jamie B; Richardson, Cameron B; Perkins, Daniel F

    2016-06-01

    Program evaluation has become increasingly important, and information on program performance often drives funding decisions. Technology use and integration can help ease the burdens associated with program evaluation by reducing the resources needed (e.g., time, money, staff) and increasing evaluation efficiency. This paper reviews how program evaluators, across disciplines, can apply internet and mobile technologies to key aspects of program evaluation, which consist of participant registration, participant tracking and retention, process evaluation (e.g., fidelity, assignment completion), and outcome evaluation (e.g., behavior change, knowledge gain). In addition, the paper focuses on the ease of use, relative cost, and fit with populations. An examination on how these tools can be integrated to enhance data collection and program evaluation is discussed. Important limitations of and considerations for technology integration, including the level of technical skill, cost needed to integrate various technologies, data management strategies, and ethical considerations, are highlighted. Lastly, a case study of technology use in an evaluation conducted by the Clearinghouse for Military Family Readiness at Penn State is presented and illustrates how technology integration can enhance program evaluation.

  16. Integrating Assistive Technology into Teacher Education Programs: Trials, Tribulations, and Lessons Learned

    Science.gov (United States)

    Van Laarhoven, Toni; Munk, Dennis D.; Chandler, Lynette K.; Zurita, Leslie; Lynch, Kathleen

    2012-01-01

    This article describes several stages in the integration of assistive technology (AT) into and across the curriculum of a teacher education program. The multi-year initiative included several projects and strategies that differentially affected faculty ability to integrate training and evaluation in using AT in their coursework. All strategies…

  17. Change and Challenge: The Influence of Technology Integration in Teacher Preparation Programs

    Science.gov (United States)

    Hersh, Emily Cinque

    2013-01-01

    The purpose of this study was to examine the extent to which teacher-preparation programs prepare teachers to integrate technology. It described the relationship between teachers' level of confidence and current practice of applying technology to instruction. In particular, three questions were addressed: (a) To what extent do teacher-preparation…

  18. IMPaCT - Integration of Missions, Programs, and Core Technologies

    Science.gov (United States)

    Balacuit, Carlos P.; Cutts, James A.; Peterson, Craig E.; Beauchamp, Patricia M.; Jones, Susan K.; Hang, Winnie N.; Dastur, Shahin D.

    2013-01-01

    IMPaCT enables comprehensive information on current NASA missions, prospective future missions, and the technologies that NASA is investing in, or considering investing in, to be accessed from a common Web-based interface. It allows dependencies to be established between missions and technology, and from this, the benefits of investing in individual technologies can be determined. The software also allows various scenarios for future missions to be explored against resource constraints, and the nominal cost and schedule of each mission to be modified in an effort to fit within a prescribed budget.

  19. Preparing Teachers for Technology Integration: Programs, Competencies, and Factors from the Literature

    Science.gov (United States)

    Oliver, Kevin; Townsend, Latricia

    2013-01-01

    This article presents a review of recent literature about preparing teachers for technology integration. The review found six types of training programs are commonly implemented: pre-service training, long-term courses, short-term workshops and institutes, coaching/mentoring, learning communities, and product/assessment approaches. The review…

  20. Vertical and Horizontal Integration of Laboratory Curricula and Course Projects across the Electronic Engineering Technology Program

    Science.gov (United States)

    Zhan, Wei; Goulart, Ana; Morgan, Joseph A.; Porter, Jay R.

    2011-01-01

    This paper discusses the details of the curricular development effort with a focus on the vertical and horizontal integration of laboratory curricula and course projects within the Electronic Engineering Technology (EET) program at Texas A&M University. Both software and hardware aspects are addressed. A common set of software tools are…

  1. Peer Coaching and Technology Integration: An Evaluation of the Microsoft Peer Coaching Program

    Science.gov (United States)

    Barron, Ann E.; Dawson, Kara; Yendol-Hoppey, Diane

    2009-01-01

    This article focuses on an evaluation of the Microsoft Peer Coaching (MPC) program in Florida, USA. First, the design of the MPC materials was analyzed using characteristics of exemplary peer coaching and technology integration models. Second, facilitators (n = 14) and coaches (n = 46) who attended the MPC workshops in Florida were surveyed…

  2. Japan Fulbright Memorial Fund Program Opens New Avenues for Effective Technology Integration into Education

    Science.gov (United States)

    Paoletti, Franco; Carlucci, Lisa Marie

    2006-04-01

    Technology is increasingly playing a major role in today's education often integrated into instruction to become one of the teacher's most effective and often indispensable tools used in the classroom. It can be said that the use of technology at the beginning of this new millennium is affecting the instructional process and it is changing some of its basic connotations. The presented work analyzes the impact of various technologies on education emphasizing the advantages provided by a successful integration, the obstacles encountered along the way, and the methodologies currently used in the process. ``Educational exchange can turn nations into people, contributing as no other form of communication can to the humanizing of international relations'' (Senator J.M. Fulbright). Technology of this modern era is providing the indispensable tool to achieve this superior level of communication overcoming historical, cultural, and language barriers. In the context of the Japan Fulbright Memorial Fund (JFMF) Teacher Program, we analyze the impact of technology on educational cross-cultural exchanges to raise awareness and interest of the scientific/educational community on the need of establishing stronger international relations promoting world peace and global prosperity.

  3. In Situ Remediation Integrated Program: Evaluation and assessment of containment technology

    Energy Technology Data Exchange (ETDEWEB)

    Gerber, M.A.; Fayer, M.J.

    1994-06-01

    Containment technology refers to a broad range of methods that are used to contain waste or contaminated groundwater and to keep uncontaminated water from entering a waste site. The U.S. Department of Energy`s (DOE) Office of Technology Development has instituted the In Situ Remediation Integrated Program (ISRIP) to advance the state-of-the-art of innovative technologies that contain or treat, in situ, contaminated media such as soil and groundwater, to the point of demonstration and to broaden the applicability of these technologies to the widely varying site remediation requirements throughout the DOE complex. The information provided here is an overview of the state-of-the-art of containment technology and includes a discussion of ongoing development projects; identifies the technical gaps; discusses the priorities for resolution of the technical gaps; and identifies the site parameters affecting the application of a specific containment method. The containment technology described in this document cover surface caps; vertical barriers such as slurry walls, grout curtains, sheet pilings, frozen soil barriers, and vitrified barriers; horizontal barriers; sorbent barriers; and gravel layers/curtains. Within DOE, containment technology could be used to prevent water infiltration into buried waste; to provide for long-term containment of pits, trenches, and buried waste sites; for the interim containment of leaking underground storage tanks and piping; for the removal of contaminants from groundwater to prevent contamination from migrating off-site; and as an interim measure to prevent the further migration of contamination during the application of an in situ treatment technology such as soil flushing. The ultimate goal is the implementation of containment technology at DOE sites as a cost-effective, efficient, and safe choice for environmental remediation and restoration activities.

  4. Effects of Instructional Technology Integration Strategies in Orientation Programs on Nurse Retention in Magnet and Non-Magnet Hospitals

    Science.gov (United States)

    Hancharik, Sharon D.

    2008-01-01

    This applied dissertation study was designed to learn if the increased use of instructional technology integration strategies in nursing orientation programs resulted in an increased retention of new nurses. The study attempted to uncover the current retention rate and use of technology at the participating hospitals. The data obtained from Magnet…

  5. Learning in Context: Technology Integration in a Teacher Preparation Program Informed by Situated Learning Theory

    Science.gov (United States)

    Bell, Randy L.; Maeng, Jennifer L.; Binns, Ian C.

    2013-01-01

    This investigation explores the effectiveness of a teacher preparation program aligned with situated learning theory on preservice science teachers' use of technology during their student teaching experiences. Participants included 26 preservice science teachers enrolled in a 2-year Master of Teaching program. A specific program goal was to…

  6. Technology integration in physical education teacher education programs: a comparative analysis

    Directory of Open Access Journals (Sweden)

    Juniu , Susana

    2013-09-01

    Full Text Available El propósito de esta investigación fue examinar y comparar las actitudes y percepciones sobre la preparación para utilizar e integrar tecnología educativa en la práctica de la enseñanza entre estudiantes de educación física en el programa de formación de docentes en Educación Física de Montclair State University MSU (N = 187, Nueva Jersey, EE.UU. y de Kibbutzim College (KCE (N = 120, Tel Aviv, Israel. Los datos fueron recopilados por medio de un cuestionario. De los 307 participantes, el 50.8% son mujeres y el 48.5%, hombres. Según años de carrera, 15 % eran de primer año (N = 47, 16% de segundo año (N = 49, 24 % de tercer año (N = 74 y 45% de cuarto año (N = 137. El análisis de t-tests y Mann-Whitney U indicó que existe una diferencia significativa entre ambas instituciones en: (a el acceso a las computadoras en la universidad, (b la opinión de los estudiantes acerca de si están preparados para integrar las TIC en la enseñanza, (c el conocimiento tecnológico adquirido durante las clases, y (d la opinión del estudiante si los profesores son un ejemplo en el uso de tecnologías educativas. Según las encuestas, este hecho refleja que los estudiantes de MSU tienen conocimientos más claros sobre uso de tecnologías específicas como monitores de ritmo cardíaco, podómetros, sistemas de evaluación de la aptitud y destrezas física, etc. y que las diferencias entre las universidades no dependen del genero o de los años de carrera de los estudiantes.The purpose of this research was to examine and compare the attitudes and perceptions of program preparation to use and integrate technology during teaching practices between pre-service physical education students from Montclair State University (MSU (N = 187, NJ, USA and from Kibbutzim College of Education (KCE (N = 120. Data was collected by means of a questionnaire. Of the 307 participants, 50.8% are women and 48.5% men. According to their college status, 15% were first

  7. Air Vehicle Technology Integration Program (AVTIP) Delivery Order 0008: Open Control Platform (OCP) Software Enabled Control (SEC) Hardware in the Loop Simulation Program

    Science.gov (United States)

    2004-07-01

    AFRL-VA-WP-TR-2006-3074 AIR VEHICLE TECHNOLOGY INTEGRATION PROGRAM (AVTIP) Delivery Order 0008: Open Control Platform (OCP) Software Enabled...especially the case since the NGC technology software for SEC was completely developed in the Simulink environment. The OCP middleware was put through...STANLEY H. PRUETT GARY K. HELLMANN, Chief Aerospace Vehicles Technology Aerospace Vehicles Technology Assessment & Simulation Branch Assessment

  8. Effects of the Professional Development Program on Turkish Teachers: Technology Integration along with Attitude towards ICT in Education

    Science.gov (United States)

    Uslu, Oner; Bumen, Nilay T.

    2012-01-01

    The purpose of this study is to analyze the impact of the professional development (PD) program on technology integration (TI) besides attitudes towards ICT in education of Turkish teachers. This study demonstrates the outcomes of one group pre-test and post-test design based on data, collected before, just after and six weeks after the PD…

  9. Factors Influencing the Selection of the Systems Integration Organizational Model Type for Planning and Implementing Government High-Technology Programs

    Science.gov (United States)

    Thomas, Leann; Utley, Dawn

    2006-01-01

    While there has been extensive research in defining project organizational structures for traditional projects, little research exists to support high technology government project s organizational structure definition. High-Technology Government projects differ from traditional projects in that they are non-profit, span across Government-Industry organizations, typically require significant integration effort, and are strongly susceptible to a volatile external environment. Systems Integration implementation has been identified as a major contributor to both project success and failure. The literature research bridges program management organizational planning, systems integration, organizational theory, and independent project reports, in order to assess Systems Integration (SI) organizational structure selection for improving the high-technology government project s probability of success. This paper will describe the methodology used to 1) Identify and assess SI organizational structures and their success rate, and 2) Identify key factors to be used in the selection of these SI organizational structures during the acquisition strategy process.

  10. Academic Use of Social Media Technologies as an Integral Element of Informatics Program Delivery in Malaysia

    Science.gov (United States)

    Lim, Jane See Yin; Harper, Barry; Chicharo, Joe F.

    2014-01-01

    Higher education institutions are currently examining how the current emerging technologies and social media applications can be integrated with the appropriate teaching pedagogies adopted by higher education institutions to provide students with learning experiences that take advantage of these new affordances. Due to the continuous and pervasive…

  11. Generation IV Reactors Integrated Materials Technology Program Plan: Focus on Very High Temperature Reactor Materials

    Energy Technology Data Exchange (ETDEWEB)

    Corwin, William R [ORNL; Burchell, Timothy D [ORNL; Katoh, Yutai [ORNL; McGreevy, Timothy E [ORNL; Nanstad, Randy K [ORNL; Ren, Weiju [ORNL; Snead, Lance Lewis [ORNL; Wilson, Dane F [ORNL

    2008-08-01

    Since 2002, the Department of Energy's (DOE's) Generation IV Nuclear Energy Systems (Gen IV) Program has addressed the research and development (R&D) necessary to support next-generation nuclear energy systems. The six most promising systems identified for next-generation nuclear energy are described within this roadmap. Two employ a thermal neutron spectrum with coolants and temperatures that enable hydrogen or electricity production with high efficiency (the Supercritical Water Reactor-SCWR and the Very High Temperature Reactor-VHTR). Three employ a fast neutron spectrum to enable more effective management of actinides through recycling of most components in the discharged fuel (the Gas-cooled Fast Reactor-GFR, the Lead-cooled Fast Reactor-LFR, and the Sodium-cooled Fast Reactor-SFR). The Molten Salt Reactor (MSR) employs a circulating liquid fuel mixture that offers considerable flexibility for recycling actinides and may provide an alternative to accelerator-driven systems. At the inception of DOE's Gen IV program, it was decided to significantly pursue five of the six concepts identified in the Gen IV roadmap to determine which of them was most appropriate to meet the needs of future U.S. nuclear power generation. In particular, evaluation of the highly efficient thermal SCWR and VHTR reactors was initiated primarily for energy production, and evaluation of the three fast reactor concepts, SFR, LFR, and GFR, was begun to assess viability for both energy production and their potential contribution to closing the fuel cycle. Within the Gen IV Program itself, only the VHTR class of reactors was selected for continued development. Hence, this document will address the multiple activities under the Gen IV program that contribute to the development of the VHTR. A few major technologies have been recognized by DOE as necessary to enable the deployment of the next generation of advanced nuclear reactors, including the development and qualification of

  12. Updated Generation IV Reactors Integrated Materials Technology Program Plan, Revision 2

    Energy Technology Data Exchange (ETDEWEB)

    Corwin, William R [ORNL; Burchell, Timothy D [ORNL; Halsey, William [Lawrence Livermore National Laboratory (LLNL); Hayner, George [Idaho National Laboratory (INL); Katoh, Yutai [ORNL; Klett, James William [ORNL; McGreevy, Timothy E [ORNL; Nanstad, Randy K [ORNL; Ren, Weiju [ORNL; Snead, Lance Lewis [ORNL; Stoller, Roger E [ORNL; Wilson, Dane F [ORNL

    2005-12-01

    The Department of Energy's (DOE's) Generation IV Nuclear Energy Systems Program will address the research and development (R&D) necessary to support next-generation nuclear energy systems. Such R&D will be guided by the technology roadmap developed for the Generation IV International Forum (GIF) over two years with the participation of over 100 experts from the GIF countries. The roadmap evaluated over 100 future systems proposed by researchers around the world. The scope of the R&D described in the roadmap covers the six most promising Generation IV systems. The effort ended in December 2002 with the issue of the final Generation IV Technology Roadmap [1.1]. The six most promising systems identified for next generation nuclear energy are described within the roadmap. Two employ a thermal neutron spectrum with coolants and temperatures that enable hydrogen or electricity production with high efficiency (the Supercritical Water Reactor - SCWR and the Very High Temperature Reactor - VHTR). Three employ a fast neutron spectrum to enable more effective management of actinides through recycling of most components in the discharged fuel (the Gas-cooled Fast Reactor - GFR, the Lead-cooled Fast Reactor - LFR, and the Sodium-cooled Fast Reactor - SFR). The Molten Salt Reactor (MSR) employs a circulating liquid fuel mixture that offers considerable flexibility for recycling actinides, and may provide an alternative to accelerator-driven systems. A few major technologies have been recognized by DOE as necessary to enable the deployment of the next generation of advanced nuclear reactors, including the development and qualification of the structural materials needed to ensure their safe and reliable operation. Accordingly, DOE has identified materials as one of the focus areas for Gen IV technology development.

  13. Converging micro-nano-bio technologies towards integrated in-vitro testing systems: Current activities and future challenges under the EU-Information & communication technologies program.

    Science.gov (United States)

    Lymberis, A

    2010-01-01

    Interdisciplinary research towards integrated systems and their applications based on emerging convergence of information & communication technologies, micro-nano and bio technologies is expected to have a direct impact in healthcare, ageing population and well being. Micro-Nano-Bio Systems (MNBS) research and development activities under the European Union's R&D Programs, Information & Communication Technologies priority address miniaturised, smart and integrated systems for in-vitro testing (e.g. lab-on-chips) and systems interacting with the human (e.g. autonomous implants, endoscopic capsules and robotics for minimally invasive surgery). Projects addressing in-vitro testing focus on research, development and testing of technology building blocs (e.g. sample preparation technique, ultra sensitive detection technique, chemistry process for molecular recognition and microfluidics) and their integration into smart and miniaturised systems e.g. DNA & protein arrays, biochips, Lab on Chip and Lab on Card. Current challenges and developed solutions as well as open issues to fully meet technological and socioeconomic needs are presented in this paper as background introductory information to the mini-symposium on "MNBS in-vitro testing". Relevant examples of R&D within the group will be presented in the mini-symposium.

  14. New technology integration planning workshop

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    Purpose of the Workshop was to provide guidance, reflecting electric utility industry viewpoints, for developing and directing its research and development program structures to facilitate the integration of new energy technologies into electric utility systems. The Workshop was structured to directly elicit the positions and viewpoints representative of electric utility companies.

  15. DOE Hydrogen, Fuel Cells and Infrastructure Technologies Program Integrated Hydrogen Production, Purification and Compression System

    Energy Technology Data Exchange (ETDEWEB)

    Tamhankar, Satish; Gulamhusein, Ali; Boyd, Tony; DaCosta, David; Golben, Mark

    2011-06-30

    technologies. The overall objective was to develop an integrated system to directly produce high pressure, high-purity hydrogen from a single unit, which can meet the DOE cost H2 cost target of $2 - $3/gge when mass produced. The project was divided into two phases with the following tasks and corresponding milestones, targets and decision points. Phase 1 - Task 1 - Verify feasibility of the concept, perform a detailed techno-economic analysis, and develop a test plan; and Task 2: Build and experimentally test a Proof of Concept (POC) integrated membrane reformer/metal hydride compressor system. Phase 2 - Task 3: Build an Advanced Prototype (AP) system with modifications based on POC learning and demonstrate at a commercial site; and Task 4: Complete final product design for mass manufacturing units capable of achieving DOE 2010 H2 cost and performance targets.

  16. Generation IV Reactors Integrated Materials Technology Program Plan: Focus on Very High Temperature Reactor Materials

    Energy Technology Data Exchange (ETDEWEB)

    Corwin, William R [ORNL; Burchell, Timothy D [ORNL; Katoh, Yutai [ORNL; McGreevy, Timothy E [ORNL; Nanstad, Randy K [ORNL; Ren, Weiju [ORNL; Snead, Lance Lewis [ORNL; Wilson, Dane F [ORNL

    2008-08-01

    Since 2002, the Department of Energy's (DOE's) Generation IV Nuclear Energy Systems (Gen IV) Program has addressed the research and development (R&D) necessary to support next-generation nuclear energy systems. The six most promising systems identified for next-generation nuclear energy are described within this roadmap. Two employ a thermal neutron spectrum with coolants and temperatures that enable hydrogen or electricity production with high efficiency (the Supercritical Water Reactor-SCWR and the Very High Temperature Reactor-VHTR). Three employ a fast neutron spectrum to enable more effective management of actinides through recycling of most components in the discharged fuel (the Gas-cooled Fast Reactor-GFR, the Lead-cooled Fast Reactor-LFR, and the Sodium-cooled Fast Reactor-SFR). The Molten Salt Reactor (MSR) employs a circulating liquid fuel mixture that offers considerable flexibility for recycling actinides and may provide an alternative to accelerator-driven systems. At the inception of DOE's Gen IV program, it was decided to significantly pursue five of the six concepts identified in the Gen IV roadmap to determine which of them was most appropriate to meet the needs of future U.S. nuclear power generation. In particular, evaluation of the highly efficient thermal SCWR and VHTR reactors was initiated primarily for energy production, and evaluation of the three fast reactor concepts, SFR, LFR, and GFR, was begun to assess viability for both energy production and their potential contribution to closing the fuel cycle. Within the Gen IV Program itself, only the VHTR class of reactors was selected for continued development. Hence, this document will address the multiple activities under the Gen IV program that contribute to the development of the VHTR. A few major technologies have been recognized by DOE as necessary to enable the deployment of the next generation of advanced nuclear reactors, including the development and qualification of

  17. Integrated control and health management. Orbit transfer rocket engine technology program

    Science.gov (United States)

    Holzmann, Wilfried A.; Hayden, Warren R.

    1988-01-01

    To insure controllability of the baseline design for a 7500 pound thrust, 10:1 throttleable, dual expanded cycle, Hydrogen-Oxygen, orbit transfer rocket engine, an Integrated Controls and Health Monitoring concept was developed. This included: (1) Dynamic engine simulations using a TUTSIM derived computer code; (2) analysis of various control methods; (3) Failure Modes Analysis to identify critical sensors; (4) Survey of applicable sensors technology; and, (5) Study of Health Monitoring philosophies. The engine design was found to be controllable over the full throttling range by using 13 valves, including an oxygen turbine bypass valve to control mixture ratio, and a hydrogen turbine bypass valve, used in conjunction with the oxygen bypass to control thrust. Classic feedback control methods are proposed along with specific requirements for valves, sensors, and the controller. Expanding on the control system, a Health Monitoring system is proposed including suggested computing methods and the following recommended sensors: (1) Fiber optic and silicon bearing deflectometers; (2) Capacitive shaft displacement sensors; and (3) Hot spot thermocouple arrays. Further work is needed to refine and verify the dynamic simulations and control algorithms, to advance sensor capabilities, and to develop the Health Monitoring computational methods.

  18. Technology Commercialization Program 1991

    Energy Technology Data Exchange (ETDEWEB)

    1991-11-01

    This reference compilation describes the Technology Commercialization Program of the Department of Energy, Defense Programs. The compilation consists of two sections. Section 1, Plans and Procedures, describes the plans and procedures of the Defense Programs Technology Commercialization Program. The second section, Legislation and Policy, identifies legislation and policy related to the Program. The procedures for implementing statutory and regulatory requirements are evolving with time. This document will be periodically updated to reflect changes and new material.

  19. Are We There Yet?: The Power of Creating an Innovation Configuration Map on the Integration of Technology into Your Teacher Education Program

    Science.gov (United States)

    Swain, Colleen

    2008-01-01

    This article presents one strand of findings from a two-fold descriptive exploratory case study designed to: (1) investigate teacher educators' decisions regarding the use of technology in his or her teacher education courses; and (2) determine what the phrase "integrating technology into our teacher education program" means to teacher educators.…

  20. Radiologic Technology Program Standards.

    Science.gov (United States)

    Georgia Univ., Athens. Dept. of Vocational Education.

    This publication contains statewide standards for the radiologic technology program in Georgia. The standards are divided into 12 categories; Foundations (philosophy, purpose, goals, program objectives, availability, evaluation); Admissions (admission requirements, provisional admission requirements, recruitment, evaluation and planning); Program…

  1. Emerging Technologies Program Integration Report. Volume 2. Background, Delphi and Workshop Data. Appendices

    Science.gov (United States)

    1987-05-04

    models for specific a;plication domains. --Need experience with specific applications that will push the hardware/ .’ software/conceptual resources...militaryf impact of this technology: A. How might the tecnology in question change US military capabilities? Diminish days lost due to common viral...capability. To achieve necessary goals will require pushing of 7m1 wave tube, solid state device and antenna technologies. Oirk R. Klose . REPORTER: AV 995

  2. The Integration of Technology into Treatment Programs to Aid in the Reduction of Chronic Pain

    Science.gov (United States)

    Eckard, Chad; Asbury, Caitlyn; Bolduc, Brandon; Camerlengo, Chelsea; Gotthardt, Julia; Healy, Lauren; Waialae, Laura; Zeigler, Ceirra; Childers, Jennifer; Horzempa, Joseph

    2017-01-01

    In the United States, roughly $600 billion is spent on pain management – usually in the form of addictive opioid drugs. Due to the dangers associated with long-term opiate-based pain medication, the development of additional strategies for chronic pain management is warranted. The advent of smartphones and associated technology has provided healthcare providers with a unique opportunity to provide pain management support. This review summarizes of the use of technology to supplement chronic pain management regimens. Smartphone and internet-based applications that employ online journals facilitate improved communication between patient and clinician and allow for more personalized care and improved pain management. For instance, the e-Ouch application provides a platform for pain logs as well as feedback and coaching to patients via Twitter postings and blogs. Other applications provide online resources and blogs to improve patient education, which has shown to relieve patient symptoms through lifestyle modification. Internet-delivered cognitive behavioral therapy (CBT) focuses on the psychological coping mechanisms. The application of technology and smartphone apps toward pain management shows promise toward reducing the use of opioids in pain management, but has yet to be incorporated as a standard practice. More robust studies critically evaluating the efficacy of these technology-based therapies need to be conducted before standardization and insurance coverage can become reality. PMID:28149962

  3. SHARED TECHNOLOGY TRANSFER PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    GRIFFIN, JOHN M. HAUT, RICHARD C.

    2008-03-07

    The program established a collaborative process with domestic industries for the purpose of sharing Navy-developed technology. Private sector businesses were educated so as to increase their awareness of the vast amount of technologies that are available, with an initial focus on technology applications that are related to the Hydrogen, Fuel Cells and Infrastructure Technologies (Hydrogen) Program of the U.S. Department of Energy. Specifically, the project worked to increase industry awareness of the vast technology resources available to them that have been developed with taxpayer funding. NAVSEA-Carderock and the Houston Advanced Research Center teamed with Nicholls State University to catalog NAVSEA-Carderock unclassified technologies, rated the level of readiness of the technologies and established a web based catalog of the technologies. In particular, the catalog contains technology descriptions, including testing summaries and overviews of related presentations.

  4. State Program Integrity Reviews

    Data.gov (United States)

    U.S. Department of Health & Human Services — State program integrity reviews play a critical role in how CMS provides effective support and assistance to states in their efforts to combat provider fraud and...

  5. Leveraging Technology for Refugee Integration

    DEFF Research Database (Denmark)

    Abu Jarour, Safa'a; Krasnova, Hanna; Wenninger, Helena

    2016-01-01

    Spurred by the military conflicts, refugees’ crisis has swept Europe by surprise. With a challenge of integrating refugees into hosting societies comes the question about the role that ICTs could play in the ongoing integration efforts. Indeed, unprecedented reliance of refugees on technology......, especially smartphones, is an important distinction of the current refugees’ crisis. ICT may support integrative efforts undertaken by local authorities and other stakeholders. Nonetheless, the question how ICTs can be applied to support refugees and how detrimental effects for them and the hosting societies...... can be mitigated is difficult to answer. The panel discussion will be structured around four areas: (1) communication with the government; (2) social connectedness; (3) participation in educational programs; and (4) integration and social inclusion. The goal is to present the chances and challenges...

  6. Small engine technology programs

    Science.gov (United States)

    Niedzwiecki, Richard W.

    1990-01-01

    Described here is the small engine technology program being sponsored at the Lewis Research Center. Small gas turbine research is aimed at general aviation, commuter aircraft, rotorcraft, and cruise missile applications. The Rotary Engine program is aimed at supplying fuel flexible, fuel efficient technology to the general aviation industry, but also has applications to other missions. The Automotive Gas Turbine (AGT) and Heavy-Duty Diesel Transport Technology (HDTT) programs are sponsored by DOE. The Compound Cycle Engine program is sponsored by the Army. All of the programs are aimed towards highly efficient engine cycles, very efficient components, and the use of high temperature structural ceramics. This research tends to be generic in nature and has broad applications. The HDTT, rotary technology, and the compound cycle programs are all examining approaches to minimum heat rejection, or 'adiabatic' systems employing advanced materials. The AGT program is also directed towards ceramics application to gas turbine hot section components. Turbomachinery advances in the gas turbine programs will benefit advanced turbochargers and turbocompounders for the intermittent combustion systems, and the fundamental understandings and analytical codes developed in the research and technology programs will be directly applicable to the system projects.

  7. Radiologic Technology Program Guide.

    Science.gov (United States)

    Georgia Univ., Athens. Dept. of Vocational Education.

    This guide presents the standard curriculum for technical institutes in Georgia. The curriculum addresses the minimum competencies for a radiologic technology program. The guide contains four major sections. The General Information section contains an introduction giving an overview and defining purpose and objectives; a program description,…

  8. Delivery of integrated diabetes care using logistics and information technology--the Joint Asia Diabetes Evaluation (JADE) program.

    Science.gov (United States)

    Chan, Juliana C N; Ozaki, Risa; Luk, Andrea; Kong, Alice P S; Ma, Ronald C W; Chow, Francis C C; Wong, Patrick; Wong, Rebecca; Chung, Harriet; Chiu, Cherry; Wolthers, Troels; Tong, Peter C Y; Ko, Gary T C; So, Wing-Yee; Lyubomirsky, Greg

    2014-12-01

    Diabetes is a global epidemic, and many affected individuals are undiagnosed, untreated, or uncontrolled. The silent and multi-system nature of diabetes and its complications, with complex care protocols, are often associated with omission of periodic assessments, clinical inertia, poor treatment compliance, and care fragmentation. These barriers at the system, patient, and care-provider levels have resulted in poor control of risk factors and under-usage of potentially life-saving medications such as statins and renin-angiotensin system inhibitors. However, in the clinical trial setting, use of nurses and protocol with frequent contact and regular monitoring have resulted in marked differences in event rates compared to epidemiological data collected in the real-world setting. The phenotypic heterogeneity and cognitive-psychological-behavioral needs of people with diabetes call for regular risk stratification to personalize care. Quality improvement initiatives targeted at patient education, task delegation, case management, and self-care promotion had the largest effect size in improving cardio-metabolic risk factors. The Joint Asia Diabetes Evaluation (JADE) program is an innovative care prototype that advocates a change in clinic setting and workflow, coordinated by a doctor-nurse team and augmented by a web-based portal, which incorporates care protocols and a validated risk engine to provide decision support and regular feedback. By using logistics and information technology, supported by a network of health-care professionals to provide integrated, holistic, and evidence-based care, the JADE Program aims to establish a high-quality regional diabetes database to reflect the status of diabetes care in real-world practice, confirm efficacy data, and identify unmet needs. Through collaborative efforts, we shall evaluate the feasibility, acceptability, and cost-effectiveness of this "high tech, soft touch" model to make diabetes and chronic disease care more

  9. Pollution Prevention Program: Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-01

    The Department of Energy (DOE) has established a national Research, Development, Demonstration, Testing, and Evaluation (RDDT&E) Program for pollution prevention and waste minimization at its production plants During FY89/90 the Office of Environmental Restoration and Waste Management (EM), through the Office of Technology Development (OTD), established comprehensive, pollution prevention technical support programs to demonstrate new, environmentally-conscious technology for production processes. The RDDT&E program now entails collaborative efforts across DOE. The Pollution Prevention Program is currently supporting three major activities: The DOE/US Air Force Memorandum of Understanding Program is a collaborative effort to utilize the combined resources of DOE and the Department of Defense, eliminate duplication of effort in developing technologies, and to facilitate technology solutions aimed at reducing waste through process modification, material substitution or recycling. The Waste Component Recycle, Treatment and Disposal Integrated Demonstration (WeDID) will develop recycle, treatment, and disposal processes and associated technologies for use in the dismantlement of non-nuclear weapons components, to support US arms treaties and policies. This program will focus on meeting all security and regulatory requirements (with additional benefit to the commercial electronics industry). The Environmentally Conscious Manufacturing Integrated Demonstration (ECMID) will effectively implement ECM technologies that address both the needs of the DOE Complex and US electronics industry, and encourage strong interaction between DOE and US industry. The ECMID will also develop life cycle analysis tools that will aid decisionmakers in selecting the optimum process based on the tradeoffs between cost an environmental impact.

  10. Energy Technology Programs: program summaries for 1979

    Energy Technology Data Exchange (ETDEWEB)

    1979-12-01

    The Energy Technology Programs in the BNL Department of Energy and Environment cover a broad range of activities, namely: electrochemical research, chemical energy storage, chemical heat pumps, solar technology, fossil technology, catalytic systems development, space-conditioning technology, and technical support/program management. Summaries of the individual tasks associated with these activities along with publications, significant accomplishments, and program funding levels are presented.

  11. Technology Integration Experiences of Teachers

    Science.gov (United States)

    Çoklar, Ahmet Naci; Yurdakul, Isil Kabakçi

    2017-01-01

    Teachers are important providers of educational sustainability. Teachers' ability to adapt themselves to rapidly developing technologies applicable to learning environments is connected with technology integration. The purpose of this study is to investigate teachers' technology integration experiences in the course of learning and teaching…

  12. Environmental technologies program, Fiscal year 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    This document presents details of the technology that is currently being demonstrated at the Hanford Site. The program is testing technology for cost and time savings in the following clean-up areas: detection and characterization; soil and ground water remediation; remote handling; waste minimization; and high-level, low-level, and mixed waste treatment. This document also contains a technology integration section.

  13. EPRI fuel cladding integrity program

    Energy Technology Data Exchange (ETDEWEB)

    Yang, R. [Electric Power Research Institute, Palo Alto, CA (United States)

    1997-01-01

    The objectives of the EPRI fuel program is to supplement the fuel vendor research to assure that utility economic and operational interests are met. To accomplish such objectives, EPRI has conducted research and development efforts to (1) reduce fuel failure rates and mitigate the impact of fuel failures on plant operation, (2) provide technology to extend burnup and reduce fuel cycle cost. The scope of R&D includes fuel and cladding. In this paper, only R&D related to cladding integrity will be covered. Specific areas aimed at improving fuel cladding integrity include: (1) Fuel Reliability Data Base; (2) Operational Guidance for Defective Fuel; (3) Impact of Water Chemistry on Cladding Integrity; (4) Cladding Corrosion Data and Model; (5) Cladding Mechanical Properties; and (6) Transient Fuel Cladding Response.

  14. SP-100 thermionic technology program annual integrated technical progress report for the period ending September 30, 1984

    Energy Technology Data Exchange (ETDEWEB)

    Holland, J.W. (ed.)

    1984-11-01

    The thermionic technology program addresses the feasibility issues of a seven-year-life thermionic fuel element (TFE) for the SP-100 Thermionic Reactor Space Power System. These issues relate to the extension of TFE lifetime from three to seven years, one of the SP-100 requirements. The technology to support three-year lifetimes was demonstrated in the earlier TFE development program conducted in the late-1960s and 1970s. Primary life-limiting factors were recognized to be thermionic emitter dimensional increases due to swelling of the nuclear fuel and electrical structural damage from fast neutrons. The 1984-85 technology program is investigating the fueled emitter and insulator lifetime issues, both experimentally and analytically. The goal is to analytically project the lifetime of the fueled emitter and insulator and to experimentally verify these projection methods. In 1984, the efforts were largely devoted to the design and building of fueled emitters for irradiation in 1985, validation of fuel-emitter models, development of irradiation-resistant metal-ceramic seal and sheath insulator, modeling of insulator lifetime, and development of wide-spread, high-performance thermionic converters.

  15. Geothermal Technologies Program Overview - Peer Review Program

    Energy Technology Data Exchange (ETDEWEB)

    Milliken, JoAnn [Office of Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States)

    2011-06-06

    This Geothermal Technologies Program presentation was delivered on June 6, 2011 at a Program Peer Review meeting. It contains annual budget, Recovery Act, funding opportunities, upcoming program activities, and more.

  16. Space Technology Research Grants Program

    Data.gov (United States)

    National Aeronautics and Space Administration — The Space Technology Research Grants Program will accelerate the development of "push" technologies to support the future space science and exploration...

  17. Hybrid propulsion technology program

    Science.gov (United States)

    1990-01-01

    Technology was identified which will enable application of hybrid propulsion to manned and unmanned space launch vehicles. Two design concepts are proposed. The first is a hybrid propulsion system using the classical method of regression (classical hybrid) resulting from the flow of oxidizer across a fuel grain surface. The second system uses a self-sustaining gas generator (gas generator hybrid) to produce a fuel rich exhaust that was mixed with oxidizer in a separate combustor. Both systems offer cost and reliability improvement over the existing solid rocket booster and proposed liquid boosters. The designs were evaluated using life cycle cost and reliability. The program consisted of: (1) identification and evaluation of candidate oxidizers and fuels; (2) preliminary evaluation of booster design concepts; (3) preparation of a detailed point design including life cycle costs and reliability analyses; (4) identification of those hybrid specific technologies needing improvement; and (5) preperation of a technology acquisition plan and large scale demonstration plan.

  18. Nuclear Technology Programs

    Energy Technology Data Exchange (ETDEWEB)

    Harmon, J.E. (ed.)

    1990-10-01

    This document reports on the work done by the Nuclear Technology Programs of the Chemical Technology Division, Argonne National Laboratory, in the period April--September 1988. These programs involve R D in three areas: applied physical chemistry, separation science and technology, and nuclear waste management. The work in applied physical chemistry includes investigations into the processes that control the release and transport of fission products under accident-like conditions, the thermophysical properties of selected materials in environments simulating those of fusion energy systems. In the area of separation science and technology, the bulk of the effort is concerned with developing and implementing processes for the removal and concentration of actinides from waste streams contaminated by transuranic elements. Another effort is concerned with examining the feasibility of substituting low-enriched for high-enriched uranium in the production of fission-product {sup 99}Mo. In the area of waste management, investigations are underway on the performance of materials in projected nuclear repository conditions to provide input to the licensing of the nation's high-level waste repositories.

  19. ABC Technology Development Program

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-10-14

    The Accelerator-Based Conversion (ABC) facility will be designed to accomplish the following mission: `Provide a weapon`s grade plutonium disposition capability in a safe, economical, and environmentally sound manner on a prudent schedule for [50] tons of weapon`s grade plutonium to be disposed on in [20] years.` This mission is supported by four major objectives: provide a reliable plutonium disposition capability within the next [15] years; provide a level of safety and of safety assurance that meets or exceeds that afforded to the public by modern commercial nuclear power plants; meet or exceed all applicable federal, state, and local regulations or standards for environmental compliance; manage the program in a cost effective manner. The ABC Technology Development Program defines the technology development activities that are required to accomplish this mission. The technology development tasks are related to the following topics: blanket system; vessel systems; reactivity control systems; heat transport system components; energy conversion systems; shutdown heat transport systems components; auxiliary systems; technology demonstrations - large scale experiments.

  20. Building Technologies Program Multi-Year Program Plan Research and Development 2008

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2008-01-01

    Building Technologies Program Multi-Year Program Plan 2008 for research and development, including residential and commercial integration, lighting, HVAC and water heating, envelope, windows, and analysis tools.

  1. Avionic Data Bus Integration Technology

    Science.gov (United States)

    1991-12-01

    address the hardware-software interaction between a digital data bus and an avionic system. Very Large Scale Integration (VLSI) ICs and multiversion ...the SCP. In 1984, the Sperry Corporation developed a fault tolerant system which employed multiversion programming, voting, and monitoring for error... MULTIVERSION PROGRAMMING. N-version programming. 226 N-VERSION PROGRAMMING. The independent coding of a number, N, of redundant computer programs that

  2. Technology integration project: Environmental Restoration Technologies Department Sandia National Laboratories

    Energy Technology Data Exchange (ETDEWEB)

    Williams, C.V.; Burford, T.D. [Sandia National Labs., Albuquerque, NM (United States). Environmental Restoration Technologies; Allen, C.A. [Tech Reps, Inc., Albuquerque, NM (United States)

    1996-08-01

    Sandia National Laboratories Environmental Restoration Technologies Department is developing environmental restoration technologies through funding form the US Department of Energy`s (DOE`s) Office of Science and Technology. Initially, this technology development has been through the Mixed Waste Landfill Integrated Demonstration (MWLID). It is currently being developed through the Contaminant Plume containment and Remediation Focus Area, the Landfill Stabilization Focus Area, and the Characterization, Monitoring, and Sensor Cross-Cutting Program. This Technology Integration Project (TIP) was responsible for transferring MWLID-developed technologies for routine use by environmental restoration groups throughout the DOE complex and commercializing these technologies to the private sector. The MWLID`s technology transfer/commercialization successes were achieved by involving private industry in development, demonstration, and technology transfer/commercialization activities; gathering and disseminating information about MWLID activities and technologies; and promoting stakeholder and regulatory involvement. From FY91 through FY95, 30 Technical Task Plans (TTPs) were funded. From these TTPs, the MWLID can claim 15 technology transfer/commercialization successes. Another seven technology transfer/commercialization successes are expected. With the changeover to the focus areas, the TIP continued the technology transfer/commercialization efforts begun under the MWLID.

  3. HETEROGENEOUS INTEGRATION TECHNOLOGY

    Science.gov (United States)

    2017-08-24

    in- package integration. It involves the integration of circuits from fully processed wafers using micro- bumps and TSVs. There are 3 basic kinds of... bumping ” and “Cu-to-Cu” categories. The first approach involves the fabrication of micro- bumps on both sides of the thinned wafers with TSVs, and...interfacing wafers with bumps aligned. The application of pressure and heat makes permanent contact between bumps . A thin adhesive layer can be used between

  4. Mixed wasted integrated program: Logic diagram

    Energy Technology Data Exchange (ETDEWEB)

    Mayberry, J.; Stelle, S. [Science Applications International Corp., Idaho Falls, ID (United States); O`Brien, M. [Univ. of Arizona, Tucson, AZ (United States); Rudin, M. [Univ. of Nevada, Las Vegas, NV (United States); Ferguson, J. [Lockheed Idaho Technologies Co., Idaho Falls, ID (United States); McFee, J. [I.T. Corp., Albuquerque, NM (United States)

    1994-11-30

    The Mixed Waste Integrated Program Logic Diagram was developed to provide technical alternative for mixed wastes projects for the Office of Technology Development`s Mixed Waste Integrated Program (MWIP). Technical solutions in the areas of characterization, treatment, and disposal were matched to a select number of US Department of Energy (DOE) treatability groups represented by waste streams found in the Mixed Waste Inventory Report (MWIR).

  5. Integrated Financial Management Program

    Science.gov (United States)

    Pho, Susan

    2004-01-01

    Having worked in the Employees and Commercial Payments Branch of the Financial Management Division for the past 3 summers, I have seen the many changes that have occurred within the NASA organization. As I return each summer, I find that new programs and systems have been adapted to better serve the needs of the Center and of the Agency. The NASA Agency has transformed itself the past couple years with the implementation of the Integrated Financial Management Program (IFMP). IFMP is designed to allow the Agency to improve its management of its Financial, Physical, and Human Resources through the use of multiple enterprise module applications. With my mentor, Joseph Kan, being the branch chief of the Employees and Commercial Payments Branch, I have been exposed to several modules, such as Travel Manager, WebTads, and Core Financial/SAP, which were implemented in the last couple of years under the IFMP. The implementation of these agency-wide systems has sometimes proven to be troublesome. Prior to IFMP, each NASA Center utilizes their own systems for Payroll, Travel, Accounts Payable, etc. But with the implementation of the Integrated Financial Management Program, all the "legacy" systems had to be eliminated. As a result, a great deal of enhancement and preparation work is necessary to ease the transformation from the old systems to the new. All this work occurs simultaneously; for example, e-Payroll will "go live" in several months, but a system like Travel Manager will need to have information upgraded within the system to meet the requirements set by Headquarters. My assignments this summer have given me the opportunity to become involved with such work. So far, I have been given the opportunity to participate in projects resulting from a congressional request, several bankcard reconciliations, updating routing lists for Travel Manager, updating the majordomo list for Travel Manager approvers and point of contacts, and a NASA Headquarters project involving

  6. MHD Technology Transfer, Integration and Review Committee

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    This fifth semi-annual status report of the MHD Technology Transfer, Integration, and Review Committee (TTIRC) summarizes activities of the TTIRC during the period April 1990 through September 1990. It includes summaries and minutes of committee meetings, progress summaries of ongoing Proof-of-Concept (POC) contracts, discussions pertaining to technical integration issues in the POC program, and planned activities for the next six months.

  7. Integrating undergraduate research into the electro-optics and laser engineering technology program at Indiana University of Pennsylvania

    Science.gov (United States)

    Zhou, Andrew F.

    2014-07-01

    Bringing research into an undergraduate curriculum is a proven and powerful practice with many educational benefits to students and the professional rewards to faculty mentors. In recent years, undergraduate research has gained national prominence as an effective problem-based learning strategy. Developing and sustaining a vibrant undergraduate research program of high quality and productivity is an outstanding example of the problem-based learning. To foster student understanding of the content learned in the classroom and nurture enduring problem-solving and critical-thinking abilities, we have created a collaborative learning environment by building research into the Electro-Optics curriculum for the first- and second-year students. The teaching methodology is described and examples of the research projects are given. Such a research-integrated curriculum effectively enhances student learning and critical thinking skills, and strengthens the research culture for the first- and second-year students.

  8. Integrate Technology with Student Success

    Science.gov (United States)

    Wolf, Drew; Lindeman, Patrick; Wolf, Trent; Dunnerstick, Robert

    2011-01-01

    As information technology continues to progress, teaching mathematic with multimedia is becoming a new way of instruction. Integrating technology enables students to become more active in the learning process. When students feel more vested in actual learning, retention of the material tends to rise significantly. This article describes how tools…

  9. Converging micro-nano-bio technologies towards integrated biomedical systems: state of the art and future perspectives under the EU-information & communication technologies program.

    Science.gov (United States)

    Lymberis, A

    2008-01-01

    Research and development at the convergence of microelectronics, nano-materials, biochemistry, measurement technology and information technology is leading to a new class of biomedical systems and applications e.g. molecular imaging, point of care testing, gene therapy and bionics (including on and inside the body sensors and other miniaturised smart systems) which are expected to revolutionise the healthcare provision and quality of life. In particular they are expected to identify diseases at the earliest possible stage, intervene before symptomatic disease becomes apparent and monitor both the progress of the diseases and the effect of intervention and therapeutic procedures. The group of EC-funded projects on Micro-Nano-Bio Convergence Systems, "so-called" MNBS, is made by projects developing systems that use a vast array of technologies to integrate across traditional boundaries between the micro-nano-bio, and info worlds, enabling a wide range of applications from health care to food quality monitoring. It includes mainly two sub-groups, one dealing with systems for in vitro molecular diagnosis and biological/biochemical analysis and the other is dealing with systems for in vivo interaction with the human body. Current status of development and future challenges, technological and socioeconomic, are briefly presented in this paper as background introductory information to the mini-symposium on MNBS. Relevant examples of R&D within the group will be presented in the mini-symposium.

  10. Clean Technology Evaluation & Workforce Development Program

    Energy Technology Data Exchange (ETDEWEB)

    Patricia Glaza

    2012-12-01

    The overall objective of the Clean Technology Evaluation portion of the award was to design a process to speed up the identification of new clean energy technologies and match organizations to testing and early adoption partners. The project was successful in identifying new technologies targeted to utilities and utility technology integrators, in developing a process to review and rank the new technologies, and in facilitating new partnerships for technology testing and adoption. The purpose of the Workforce Development portion of the award was to create an education outreach program for middle & high-school students focused on clean technology science and engineering. While originally targeting San Diego, California and Cambridge, Massachusetts, the scope of the program was expanded to include a major clean technology speaking series and expo as part of the USA Science & Engineering Festival on the National Mall in Washington, D.C.

  11. Grid integration and smart grid implementation of emerging technologies in electric power systems through approximate dynamic programming

    Science.gov (United States)

    Xiao, Jingjie

    A key hurdle for implementing real-time pricing of electricity is a lack of consumers' responses. Solutions to overcome the hurdle include the energy management system that automatically optimizes household appliance usage such as plug-in hybrid electric vehicle charging (and discharging with vehicle-to-grid) via a two-way communication with the grid. Real-time pricing, combined with household automation devices, has a potential to accommodate an increasing penetration of plug-in hybrid electric vehicles. In addition, the intelligent energy controller on the consumer-side can help increase the utilization rate of the intermittent renewable resource, as the demand can be managed to match the output profile of renewables, thus making the intermittent resource such as wind and solar more economically competitive in the long run. One of the main goals of this dissertation is to present how real-time retail pricing, aided by control automation devices, can be integrated into the wholesale electricity market under various uncertainties through approximate dynamic programming. What distinguishes this study from the existing work in the literature is that whole- sale electricity prices are endogenously determined as we solve a system operator's economic dispatch problem on an hourly basis over the entire optimization horizon. This modeling and algorithm framework will allow a feedback loop between electricity prices and electricity consumption to be fully captured. While we are interested in a near-optimal solution using approximate dynamic programming; deterministic linear programming benchmarks are use to demonstrate the quality of our solutions. The other goal of the dissertation is to use this framework to provide numerical evidence to the debate on whether real-time pricing is superior than the current flat rate structure in terms of both economic and environmental impacts. For this purpose, the modeling and algorithm framework is tested on a large-scale test case

  12. Development of core design and analysis technology for integral reactor; development of coolant activity and dose evaluation program

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Chang Sun; Kim, Byeong Soo; Go, Hyun Seok; Lee, Young Wook; Jang, Mee [Seoul National University, Seoul (Korea)

    2002-03-01

    SMART, small- medium-sized integral reactor, is different from the customary electricity-generation PWR in design concepts and structures. The conventional coolant activity evaluation codes used in customary PWRs cannot be applied to SMART. In this study, SAEP(Specific Activity Evaluation Program) is developed that can be applied to both customary PWR and advanced reactor such as SMART. SAEP uses three methods(SAEP Ver.02, Ver.05, Ver.06) to evaluate coolant activity. They solve inhomogeneous linearly-coupled differential equations generated by considering nuclear system as N sub-components. Coolant activities of customary PWR are evaluated by use of SAEP. The results show good agreement with FSAR data. SAEP is used to evaluate coolant activities for SMART and the results are proposed in this study. These results show that SAEP is able to perform coolant activity evaluation for both customary PWR and advanced reactor such as SMART. In addition, with respect to radiation shielding optimization, conventional optimization methods and their characteristics related to radiation shielding are reviewed and analyzed. Strategies for proper usage of conventional methods are proposed to agree with the shielding design cases. 30 refs., 25 figs., 6 tabs. (Author)

  13. Development of core design and analysis technology for integral reactor; development of coolant activity and dose evaluation program

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Chang Sun; Kim, Byeong Soo; Go, Hyun Seok; Lee, Young Wook; Jang, Mee [Seoul National University, Seoul (Korea)

    2002-03-01

    SMART, small- medium-sized integral reactor, is different from the customary electricity-generation PWR in design concepts and structures. The conventional coolant activity evaluation codes used in customary PWRs cannot be applied to SMART. In this study, SAEP(Specific Activity Evaluation Program) is developed that can be applied to both customary PWR and advanced reactor such as SMART. SAEP uses three methods(SAEP Ver.02, Ver.05, Ver.06) to evaluate coolant activity. They solve inhomogeneous linearly-coupled differential equations generated by considering nuclear system as N sub-components. Coolant activities of customary PWR are evaluated by use of SAEP. The results show good agreement with FSAR data. SAEP is used to evaluate coolant activities for SMART and the results are proposed in this study. These results show that SAEP is able to perform coolant activity evaluation for both customary PWR and advanced reactor such as SMART. In addition, with respect to radiation shielding optimization, conventional optimization methods and their characteristics related to radiation shielding are reviewed and analyzed. Strategies for proper usage of conventional methods are proposed to agree with the shielding design cases. 30 refs., 25 figs., 6 tabs. (Author)

  14. Clean Coal Technology Programs: Program Update 2009

    Energy Technology Data Exchange (ETDEWEB)

    None

    2009-10-01

    The purpose of the Clean Coal Technology Programs: Program Update 2009 is to provide an updated status of the U.S. Department of Energy (DOE) commercial-scale demonstrations of clean coal technologies (CCT). These demonstrations have been performed under the Clean Coal Technology Demonstration Program (CCTDP), the Power Plant Improvement Initiative (PPII), and the Clean Coal Power Initiative (CCPI). Program Update 2009 provides: (1) a discussion of the role of clean coal technology demonstrations in improving the nation’s energy security and reliability, while protecting the environment using the nation’s most abundant energy resource—coal; (2) a summary of the funding and costs of the demonstrations; and (3) an overview of the technologies being demonstrated, along with fact sheets for projects that are active, recently completed, or recently discontinued.

  15. Respiratory Therapy Technology Program Standards.

    Science.gov (United States)

    Georgia Univ., Athens. Dept. of Vocational Education.

    This publication contains statewide standards for the respiratory therapy technology program in Georgia. The standards are divided into 12 categories: Foundations (philosophy, purpose, goals, program objectives, availability, evaluation; Admissions (admission requirements, provisional admission requirements, recruitment, evaluation and planning);…

  16. Avionics Maintenance Technology Program Standards.

    Science.gov (United States)

    Georgia Univ., Athens. Dept. of Vocational Education.

    This publication contains statewide standards for the avionics maintenance technology program in Georgia. The standards are divided into the following categories: foundations, diploma/degree (philosophy, purpose, goals, program objectives, availability, evaluation); admissions, diploma/degree (admission requirements, provisional admission…

  17. Integrating Informatics Technologies into Oracle

    Directory of Open Access Journals (Sweden)

    Manole VELICANU

    2006-01-01

    Full Text Available A characteristic of the actual informatics’ context is the interference of the technologies, which assumes that for creating an informatics product, is necessary to use integrate many technologies. This thing is also used for database systems which had integrated, in the past few years, almost everything is new in informatics technology. The idea is that when using database management systems - DBMS the user can benefit all the necessary interfaces and instruments for developing an application with databases from the very beginning to the end, no matter the type of application and the work environment. For example, if the database application needs any Internet facilities these could be appealed from the products that the DBMS is working with offers. The concept of the interference of informatics technologies has many advantages, which all contribute to increasing the efficiency of the activities that develop and maintain complex databases applications.

  18. Avionics Maintenance Technology Program Guide.

    Science.gov (United States)

    Georgia Univ., Athens. Dept. of Vocational Education.

    This program guide presents the avionics maintenance technology curriculum for technical institutes in Georgia. The general information section contains the following for both the diploma program and the associate degree program: purpose and objectives; program description, including admissions, typical job titles, and accreditation and…

  19. Leveraging Technology for Refugee Integration

    DEFF Research Database (Denmark)

    Abu Jarour, Safa'a; Krasnova, Hanna; Wenninger, Helena

    2016-01-01

    Spurred by the military conflicts, refugees’ crisis has swept Europe by surprise. With a challenge of integrating refugees into hosting societies comes the question about the role that ICTs could play in the ongoing integration efforts. Indeed, unprecedented reliance of refugees on technology......, especially smartphones, is an important distinction of the current refugees’ crisis. ICT may support integrative efforts undertaken by local authorities and other stakeholders. Nonetheless, the question how ICTs can be applied to support refugees and how detrimental effects for them and the hosting societies...... of ICT use by refugees on an operational level, and how ICT systems should be designed and culturally adapted....

  20. Integrating Technology in STEM Education

    Directory of Open Access Journals (Sweden)

    Priya Chacko

    2015-03-01

    Full Text Available Students have access to the Internet at their fingertips via e-tablets and smart phones. However, the STEM fields are struggling to remain relevant in students’ lives outside the classroom. In an effort to improve high school science curricula and to keep students engaged in the classroom, we developed a technology-rich bioengineering summer program for high school students in grades 9-12. The program utilized touch screen technology in conjunction with hands-on experiments and traditional lecturing to create an entertaining, relevant, and effective classroom experience.

  1. Integrating Product and Technology Development

    DEFF Research Database (Denmark)

    Meijer, Ellen Brilhuis; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

    2016-01-01

    Although dual innovation projects, defined in this article as the concurrent development of products and technologies, often occur in industry, these are only scarcely supported methodologically. Limited research has been done about dual innovation projects and their inherent challenges (e.......g. managing dependencies) and opportunities (e.g. streamlining development). This paper presents five existing reference models for technology development (TD), which were identified via a systematic literature review, where their possible integration with product development (PD) reference models...... was investigated. Based on the specific characteristics desired for dual innovation projects, such as integrated product development and coverage of multiple development stages, a set of selection criteria was employed to select suitable PD and TD reference models. The integration and adaptation of the selected...

  2. Integrated Optics Theory and Technology

    CERN Document Server

    Hunsperger, Robert G

    2009-01-01

    Integrated Optics: Theory and Technology explains the subject of optoelectronic devices and their use in integrated optics and fiber optic systems. The text emphasizes the physics of how devices work and how they can be used in various applications. Mathematical derivations and the development of design equations are provided where necessary to explain phenomena and engineering principles, but a strong effort has been made to avoid obscuring important concepts with mathematical details. Illustrations and references from technical journals have been used to demonstrate the relevance of the theory to currently important topics in industry. This sixth edition of Integrated Optics: Theory and Technology includes updates and revisions in all chapters, as well as a completely new chapter on nanophotonics. Problems are included at the end of each chapter to develop students' knowledge. Scientists, engineers, students and engineering managers can utilize this book to obtain an overall view of the theory and the most ...

  3. Programming and Technology for Accessibility in Geoscience

    Science.gov (United States)

    Sevre, E.; Lee, S.

    2013-12-01

    Many people, students and professors alike, shy away from learning to program because it is often believed to be something scary or unattainable. However, integration of programming into geoscience education can be a valuable tool for increasing the accessibility of content for all who are interested. It is my goal to dispel these myths and convince people that: 1) Students with disabilities can use programming to increase their role in the classroom, 2) Everyone can learn to write programs to simplify daily tasks, 3) With a deep understanding of the task, anyone can write a program to do a complex task, 4) Technology can be combined with programming to create an inclusive environment for all students of geoscience, and 5) More advanced knowledge of programming and technology can lead geoscientists to create software to serve as assistive technology in the classroom. It is my goal to share my experiences using technology to enhance the classroom experience as a way of addressing the aforementioned issues. Through my experience, I have found that programming skills can be included and learned by all to enhance the content of courses without detracting from curriculum. I hope that, through this knowledge, geoscience courses can become more accessible for people with disabilities by including programming and technology to the benefit of all involved.

  4. An effective skin integrity program.

    Science.gov (United States)

    Banks, K; Jones, E S; Law, M S; MacAvoy, S

    1993-01-01

    Nursing staff development personnel are responsible for increasing the awareness of nursing staff of the problems caused by pressure ulcers and for supplying them with information needed for prevention and treatment. In answer to one hospital's needs, a hospital-wide, nurse-initiated, nurse-managed skin integrity program was developed and instituted. Protocols for treatment were standardized according to the latest concepts in wound healing. Basic components of the program were included in a comprehensive but succinct reference manual available on each nursing unit. Strategies for implementation were carefully planned to include feedback, approval, and support of selected physicians and nurses. Key for an effective, ongoing skin integrity program are the skin integrity clinicians and educated, confident, and enthusiastic staff nurses. Throughout the process of introducing this program, education of various groups of health-care professionals--physicians, staff nurses, skin integrity clinicians--by the Nursing Staff Development Department was pivotal in achieving a relatively smooth implementation of the program. Outcomes have demonstrated the success of this skin integrity program to both patients and staff. Creative planning, diligent research, skillful organization, and credibility of the specialists in the Nursing Staff Development Department were important elements in the development, implementation, and success of this skin integrity program.

  5. Integrating Human Performance and Technology

    Energy Technology Data Exchange (ETDEWEB)

    Ronald K. Farris; Heather Medema

    2012-05-01

    Human error is a significant factor in the cause and/or complication of events that occur in the commercial nuclear industry. In recent years, great gains have been made using Human Performance (HU) tools focused on targeting individual behaviors. However, the cost of improving HU is growing and resistance to add yet another HU tool certainly exists, particularly for those tools that increase the paperwork for operations. Improvements in HU that are the result of leveraging existing technology, such as hand-held mobile technologies, have the potential to reduce human error in controlling system configurations, safety tag-outs, and other verifications. Operator rounds, valve line-up verifications, containment closure verifications, safety & equipment protection, and system tagging can be supported by field-deployable wireless technologies. These devices can also support the availability of critical component data in the main control room and other locations. This research pilot project reviewing wireless hand-held technology is part of the Light Water Reactor Sustainability Program (LWRSP), a research and development (R&D) program sponsored by the U. S. Department of Energy (DOE). The project is being performed in close collaboration with industry R&D programs to provide the technical foundations for licensing, and managing the long-term, safe, and economical operation of current nuclear power plants. The LWRSP vision is to develop technologies and other solutions that can improve the reliability, sustain the safety, and extend the life of the current nuclear reactor fleet.

  6. Structural Integrity Program for the 300,000-Gallon Radioactive Liquid Waste Tanks at the Idaho Nuclear Technology and Engineering Center

    Energy Technology Data Exchange (ETDEWEB)

    Bryant, Jeffrey Whealdon; Nenni, Joseph A; Timothy S. Yoder

    2003-04-01

    This report provides a record of the Structural Integrity Program for the 300,000-gal liquid waste storage tanks and associated equipment at the Idaho Nuclear Technology and Engineering Center, as required by U.S. Department of Energy M 435.1-1, “Radioactive Waste Management Manual.” This equipment is known collectively as the Tank Farm Facility. The conclusion of this report is that the Tank Farm Facility tanks, vaults, and transfer systems that remain in service for storage are structurally adequate, and are expected to remain structurally adequate over the remainder of their planned service life through 2012. Recommendations are provided for continued monitoring of the Tank Farm Facility.

  7. Structural Integrity Program for the 300,000-Gallon Radioactive Liquid Waste Storage Tanks at the Idaho Nuclear Technology and Engineering Center

    Energy Technology Data Exchange (ETDEWEB)

    Bryant, J.W.; Nenni, J.A.; Yoder, T.S.

    2003-04-22

    This report provides a record of the Structural Integrity Program for the 300,000-gal liquid waste storage tanks and associated equipment at the Idaho Nuclear Technology and Engineering Center, as required by U.S. Department of Energy M 435.1-1, ''Radioactive Waste Management Manual.'' This equipment is known collectively as the Tank Farm Facility. The conclusion of this report is that the Tank Farm Facility tanks, vaults, and transfer systems that remain in service for storage are structurally adequate, and are expected to remain structurally adequate over the remainder of their planned service life through 2012. Recommendations are provided for continued monitoring of the Tank Farm Facility.

  8. Structural Integrity Program for the 300,000-Gallon Radioactive Liquid Waste Storage Tanks at the Idaho Nuclear Technology and Engineering Center

    Energy Technology Data Exchange (ETDEWEB)

    Bryant, Jeffrey W.

    2010-08-12

    This report provides a record of the Structural Integrity Program for the 300,000-gal liquid waste storage tanks and associated equipment at the Idaho Nuclear Technology and Engineering Center, as required by U.S. Department of Energy M 435.1-1, “Radioactive Waste Management Manual.” This equipment is known collectively as the Tank Farm Facility. This report is an update, and replaces the previous report by the same title issued April 2003. The conclusion of this report is that the Tank Farm Facility tanks, vaults, and transfer systems that remain in service for storage are structurally adequate, and are expected to remain structurally adequate over the remainder of their planned service life through 2012. Recommendations are provided for continued monitoring of the Tank Farm Facility.

  9. Clean Coal Technology Demonstration Program. Program update 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-04-01

    The Clean Coal Technology Demonstration Program (CCT Program) is a $7.14 billion cost-shared industry/government technology development effort. The program is to demonstrate a new generation of advanced coal-based technologies, with the most promising technologies being moved into the domestic and international marketplace. Clean coal technologies being demonstrated under the CCT program are creating the technology base that allows the nation to meet its energy and environmental goals efficiently and reliably. The fact that most of the demonstrations are being conducted at commercial scale, in actual user environments, and under conditions typical of commercial operations allows the potential of the technologies to be evaluated in their intended commercial applications. The technologies are categorized into four market sectors: advanced electric power generation systems; environmental control devices; coal processing equipment for clean fuels; and industrial technologies. Sections of this report describe the following: Role of the Program; Program implementation; Funding and costs; The road to commercial realization; Results from completed projects; Results and accomplishments from ongoing projects; and Project fact sheets. Projects include fluidized-bed combustion, integrated gasification combined-cycle power plants, advanced combustion and heat engines, nitrogen oxide control technologies, sulfur dioxide control technologies, combined SO{sub 2} and NO{sub x} technologies, coal preparation techniques, mild gasification, and indirect liquefaction. Industrial applications include injection systems for blast furnaces, coke oven gas cleaning systems, power generation from coal/ore reduction, a cyclone combustor with S, N, and ash control, cement kiln flue gas scrubber, and pulse combustion for steam coal gasification.

  10. HUMID AIR TURBINE CYCLE TECHNOLOGY DEVELOPMENT PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    Richard Tuthill

    2002-07-18

    The Humid Air Turbine (HAT) Cycle Technology Development Program focused on obtaining HAT cycle combustor technology that will be the foundation of future products. The work carried out under the auspices of the HAT Program built on the extensive low emissions stationary gas turbine work performed in the past by Pratt & Whitney (P&W). This Program is an integral part of technology base development within the Advanced Turbine Systems Program at the Department of Energy (DOE) and its experiments stretched over 5 years. The goal of the project was to fill in technological data gaps in the development of the HAT cycle and identify a combustor configuration that would efficiently burn high moisture, high-pressure gaseous fuels with low emissions. The major emphasis will be on the development of kinetic data, computer modeling, and evaluations of combustor configurations. The Program commenced during the 4th Quarter of 1996 and closed in the 4th Quarter of 2001. It teamed the National Energy Technology Laboratory (NETL) with P&W, the United Technologies Research Center (UTRC), and a subcontractor on-site at UTRC, kraftWork Systems Inc. The execution of the program started with bench-top experiments that were conducted at UTRC for extending kinetic mechanisms to HAT cycle temperature, pressure, and moisture conditions. The fundamental data generated in the bench-top experiments was incorporated into the analytical tools available at P&W to design the fuel injectors and combustors. The NETL then used the hardware to conduct combustion rig experiments to evaluate the performance of the combustion systems at elevated pressure and temperature conditions representative of the HAT cycle. The results were integrated into systems analysis done by kraftWork to verify that sufficient understanding of the technology had been achieved and that large-scale technological application and demonstration could be undertaken as follow-on activity. An optional program extended the

  11. ELECTRIC INFRASTRUCTURE TECHNOLOGY, TRAINING, AND ASSESSMENT PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    TREMEL, CHARLES L

    2007-06-28

    The objective of this Electric Infrastructure Technology, Training and Assessment Program was to enhance the reliability of electricity delivery through engineering integration of real-time technologies for wide-area applications enabling timely monitoring and management of grid operations. The technologies developed, integrated, tested and demonstrated will be incorporated into grid operations to assist in the implementation of performance-based protection/preventive measures into the existing electric utility infrastructure. This proactive approach will provide benefits of reduced cost and improved reliability over the typical schedule-based and as needed maintenance programs currently performed by utilities. Historically, utilities have relied on maintenance and inspection programs to diagnose equipment failures and have used the limited circuit isolation devices, such as distribution main circuit breakers to identify abnormal system performance. With respect to reliable problem identification, customer calls to utility service centers are often the sole means for utilities to identify problem occurrences and determine restoration methodologies. Furthermore, monitoring and control functions of equipment and circuits are lacking; thus preventing timely detection and response to customer outages. Finally, the two-way flow of real-time system information is deficient, depriving decision makers of key information required to effectively manage and control current electric grid demands to provide reliable customer service in abnormal situations. This Program focused on advancing technologies and the engineering integration required to incorporate them into the electric grid operations to enhance electrical system reliability and reduce utility operating costs.

  12. Robotics Technology Crosscutting Program. Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    The Robotics Technology Development Program (RTDP) is a needs-driven effort. A length series of presentations and discussions at DOE sites considered critical to DOE`s Environmental Restoration and Waste Management (EM) Programs resulted in a clear understanding of needed robotics applications toward resolving definitive problems at the sites. A detailed analysis of the resulting robotics needs assessment revealed several common threads running through the sites: Tank Waste Retrieval (TWR), Contaminant Analysis Automation (CAA), Mixed Waste Operations (MWO), and Decontamination and Dismantlement (D and D). The RTDP Group also realized that some of the technology development in these four areas had common (Cross Cutting-CC) needs, for example, computer control and sensor interface protocols. Further, the OTD approach to the Research, Development, Demonstration, Testing, and Evaluation (RDDT and E) process urged an additional organizational breakdown between short-term (1--3 years) and long-term (3--5 years) efforts (Advanced Technology-AT). These factors lead to the formation of the fifth application area for Crosscutting and Advanced Technology (CC and AT) development. The RTDP is thus organized around these application areas -- TWR, CAA, MWO, D and D, and CC and AT -- with the first four developing short-term applied robotics. An RTDP Five-Year Plan was developed for organizing the Program to meet the needs in these application areas.

  13. Steam generator tube integrity program

    Energy Technology Data Exchange (ETDEWEB)

    Dierks, D.R.; Shack, W.J. [Argonne National Laboratory, IL (United States); Muscara, J.

    1996-03-01

    A new research program on steam generator tubing degradation is being sponsored by the U.S. Nuclear Regulatory Commission (NRC) at Argonne National Laboratory. This program is intended to support a performance-based steam generator tube integrity rule. Critical areas addressed by the program include evaluation of the processes used for the in-service inspection of steam generator tubes and recommendations for improving the reliability and accuracy of inspections; validation and improvement of correlations for evaluating integrity and leakage of degraded steam generator tubes, and validation and improvement of correlations and models for predicting degradation in steam generator tubes as aging occurs. The studies will focus on mill-annealed Alloy 600 tubing, however, tests will also be performed on replacement materials such as thermally-treated Alloy 600 or 690. An overview of the technical work planned for the program is given.

  14. Robotics Technology Development Program. Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-01

    The Robotics Technology Development Program (RTDP) is a ``needs-driven`` effort. A lengthy series of presentations and discussions at DOE sites considered critical to DOE`s Environmental Restoration and Waste Management (EM) Programs resulted in a clear understanding of needed robotics applications toward resolving definitive problems at the sites. A detailed analysis of the Tank Waste Retrieval (TWR), Contaminant Analysis Automation (CAA), Mixed Waste Operations (MWO), and Decontamination & Dismantlement (D&D). The RTDP Group realized that much of the technology development was common (Cross Cutting-CC) to each of these robotics application areas, for example, computer control and sensor interface protocols. Further, the OTD approach to the Research, Development, Demonstration, Testing, and Evaluation (RDDT&E) process urged an additional organizational break-out between short-term (1--3 years) and long-term (3--5 years) efforts (Advanced Technology-AT). The RDTP is thus organized around these application areas -- TWR, CAA, MWO, D&D and CC&AT -- with the first four developing short-term applied robotics. An RTDP Five-Year Plan was developed for organizing the Program to meet the needs in these application areas.

  15. 2013 Building Technologies Office Program Peer Review Report

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-11-01

    The 2013 Building Technologies Office Program Peer Review Report summarizes the results of the 2013 Building Technologies Office (BTO) peer review, which was held in Washington, D.C., on April 2–4, 2013. The review was attended by over 300 participants and included presentations on 59 BTO-funded projects: 29 from BTO’s Emerging Technologies Program, 20 from the Commercial Buildings Integration Program, 6 from the Residential Buildings Integration Program, and 4 from the Building Energy Codes Program. This report summarizes the scores and comments provided by the independent reviewers for each project.

  16. Robotics crosscutting program: Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-08-01

    The Office of Environmental Management (EM) is responsible for cleaning up the legacy of radioactive and chemically hazardous waste at contaminated sites and facilities throughout the U.S. Department of Energy (DOE) nuclear weapons complex, preventing further environmental contamination, and instituting responsible environmental management. Initial efforts to achieve this mission resulted in the establishment of environmental restoration and waste management programs. However, as EM began to execute its responsibilities, decision makers became aware that the complexity and magnitude of this mission could not be achieved efficiently, affordably, safely, or reasonably with existing technology. Once the need for advanced cleanup technologies became evident, EM established an aggressive, innovative program of applied research and technology development. The Office of Technology Development (OTD) was established in November 1989 to advance new and improved environmental restoration and waste management technologies that would reduce risks to workers, the public, and the environment; reduce cleanup costs; and devise methods to correct cleanup problems that currently have no solutions. In 1996, OTD added two new responsibilities - management of a Congressionally mandated environmental science program and development of risk policy, requirements, and guidance. OTD was renamed the Office of Science and Technology (OST). This documents presents information concerning robotics tank waste retrieval overview, robotic chemical analysis automation, robotics decontamination and dismantlement, and robotics crosscutting and advanced technology.

  17. Data integration technologies to support integrated modelling

    NARCIS (Netherlands)

    Knapen, M.J.R.; Roosenschoon, O.R.; Lokers, R.M.; Janssen, S.J.C.; Randen, van Y.; Verweij, P.J.F.M.

    2013-01-01

    Over the recent years the scientific activities of our organisation in large research projects show a shifting priority from model integration to the integration of data itself. Our work in several large projects on integrated modelling for impact assessment studies has clearly shown the importance

  18. Data integration technologies to support integrated modelling

    NARCIS (Netherlands)

    Knapen, M.J.R.; Roosenschoon, O.R.; Lokers, R.M.; Janssen, S.J.C.; Randen, van Y.; Verweij, P.J.F.M.

    2013-01-01

    Over the recent years the scientific activities of our organisation in large research projects show a shifting priority from model integration to the integration of data itself. Our work in several large projects on integrated modelling for impact assessment studies has clearly shown the importance

  19. In Situ Remediation Integrated Program: FY 1994 program summary

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-04-01

    The US Department of Energy (DOE) established the Office of Technology Development (EM-50) as an element of the Office of Environmental Management (EM) in November 1989. In an effort to focus resources and address priority needs, EM-50 introduced the concept of integrated programs (IPs) and integrated demonstrations (IDs). The In Situ Remediation Integrated Program (ISR IP) focuses research and development on the in-place treatment of contaminated environmental media, such as soil and groundwater, and the containment of contaminants to prevent the contaminants from spreading through the environment. Using in situ remediation technologies to clean up DOE sites minimizes adverse health effects on workers and the public by reducing contact exposure. The technologies also reduce cleanup costs by orders of magnitude. This report summarizes project work conducted in FY 1994 under the ISR IP in three major areas: treatment (bioremediation), treatment (physical/chemical), and containment technologies. Buried waste, contaminated soils and groundwater, and containerized waste are all candidates for in situ remediation. Contaminants include radioactive waste, volatile and nonvolatile organics, heavy metals, nitrates, and explosive materials.

  20. Building technologies program. 1995 annual report

    Energy Technology Data Exchange (ETDEWEB)

    Selkowitz, S.E.

    1996-05-01

    The 1995 annual report discusses laboratory activities in the Building Technology Program. The report is divided into four categories: windows and daylighting, lighting systems, building energy simulation, and advanced building systems. The objective of the Building Technologies program is to assist the U.S. building industry in achieving substantial reductions in building-sector energy use and associated greenhouse gas emissions while improving comfort, amenity, health, and productivity in the building sector. Past efforts have focused on windows and lighting, and on the simulation tools needed to integrate the full range of energy efficiency solutions into achievable, cost-effective design solutions for new and existing buildings. Current research is based on an integrated systems and life-cycle perspective to create cost-effective solutions for more energy-efficient, comfortable, and productive work and living environments. Sixteen subprograms are described in the report.

  1. MoldaNet: a network distributed molecular graphics and modelling program that integrates secure signed applet and Java 3D technologies.

    Science.gov (United States)

    Yoshida, H; Rzepa, H S; Tonge, A P

    1998-06-01

    MoldaNet is a molecular graphics and modelling program that integrates several new Java technologies, including authentication as a Secure Signed Applet, and implementation of Java 3D classes to enable access to hardware graphics acceleration. It is the first example of a novel class of Internet-based distributed computational chemistry tool designed to eliminate the need for user pre-installation of software on their client computer other than a standard Internet browser. The creation of a properly authenticated tool using a signed digital X.509 certificate permits the user to employ MoldaNet to read and write the files to a local file store; actions that are normally disallowed in Java applets. The modularity of the Java language also allows straightforward inclusion of Java3D and Chemical Markup Language classes in MoldaNet to permit the user to filter their model into 3D model descriptors such as VRML97 or CML for saving on local disk. The implications for both distance-based training environments and chemical commerce are noted.

  2. High Efficiency Engine Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    Rich Kruiswyk

    2010-07-13

    Caterpillar's Product Development and Global Technology Division carried out a research program on waste heat recovery with support from DOE (Department of Energy) and the DOE National Energy Technology Laboratory. The objective of the program was to develop a new air management and exhaust energy recovery system that would demonstrate a minimum 10% improvement in thermal efficiency over a base heavy-duty on-highway diesel truck engine. The base engine for this program was a 2007 C15 15.2L series-turbocharged on-highway truck engine with a LPL (low-pressure loop) exhaust recirculation system. The focus of the program was on the development of high efficiency turbomachinery and a high efficiency turbocompound waste heat recovery system. The focus of each area of development was as follows: (1) For turbine stages, the focus was on investigation and development of technologies that would improve on-engine exhaust energy utilization compared to the conventional radial turbines in widespread use today. (2) For compressor stages, the focus was on investigating compressor wheel design parameters beyond the range typically utilized in production, to determine the potential efficiency benefits thereof. (3) For turbocompound, the focus was on the development of a robust bearing system that would provide higher bearing efficiencies compared to systems used in turbocompound power turbines in production. None of the turbocharger technologies investigated involved addition of moving parts, actuators, or exotic materials, thereby increasing the likelihood of a favorable cost-value tradeoff for each technology. And the turbocompound system requires less hardware addition than competing bottoming cycle technologies, making it a more attractive solution from a cost and packaging standpoint. Main outcomes of the program are as follows: (1) Two turbine technologies that demonstrated up to 6% improvement in turbine efficiency on gas stand and 1-3% improvement in thermal efficiency

  3. High Efficiency Engine Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    Rich Kruiswyk

    2010-07-13

    Caterpillar's Product Development and Global Technology Division carried out a research program on waste heat recovery with support from DOE (Department of Energy) and the DOE National Energy Technology Laboratory. The objective of the program was to develop a new air management and exhaust energy recovery system that would demonstrate a minimum 10% improvement in thermal efficiency over a base heavy-duty on-highway diesel truck engine. The base engine for this program was a 2007 C15 15.2L series-turbocharged on-highway truck engine with a LPL (low-pressure loop) exhaust recirculation system. The focus of the program was on the development of high efficiency turbomachinery and a high efficiency turbocompound waste heat recovery system. The focus of each area of development was as follows: (1) For turbine stages, the focus was on investigation and development of technologies that would improve on-engine exhaust energy utilization compared to the conventional radial turbines in widespread use today. (2) For compressor stages, the focus was on investigating compressor wheel design parameters beyond the range typically utilized in production, to determine the potential efficiency benefits thereof. (3) For turbocompound, the focus was on the development of a robust bearing system that would provide higher bearing efficiencies compared to systems used in turbocompound power turbines in production. None of the turbocharger technologies investigated involved addition of moving parts, actuators, or exotic materials, thereby increasing the likelihood of a favorable cost-value tradeoff for each technology. And the turbocompound system requires less hardware addition than competing bottoming cycle technologies, making it a more attractive solution from a cost and packaging standpoint. Main outcomes of the program are as follows: (1) Two turbine technologies that demonstrated up to 6% improvement in turbine efficiency on gas stand and 1-3% improvement in thermal efficiency

  4. A Little TLC (Technology Learning Cycle) as a Means to Technology Integration.

    Science.gov (United States)

    Marra, Rose M.; Howland, Jane; Wedman, Judy; Diggs, Laura

    2003-01-01

    Discusses the need for elementary and secondary school teachers to integrate technology into the classroom and explains the University of Missouri's (Columbia, MO) technology-focused development program, the Technology Learning Cycle (TLC), for faculty who teach undergraduate teacher methods courses. Examines the application of the TLC to two…

  5. A Little TLC (Technology Learning Cycle) as a Means to Technology Integration.

    Science.gov (United States)

    Marra, Rose M.; Howland, Jane; Wedman, Judy; Diggs, Laura

    2003-01-01

    Discusses the need for elementary and secondary school teachers to integrate technology into the classroom and explains the University of Missouri's (Columbia, MO) technology-focused development program, the Technology Learning Cycle (TLC), for faculty who teach undergraduate teacher methods courses. Examines the application of the TLC to two…

  6. Integrating Parallelizing Compilation Technologies for SMP Clusters

    Institute of Scientific and Technical Information of China (English)

    Xiao-Bing Feng; Li Chen; Yi-Ran Wang; Xiao-Mi An; Lin Ma; Chun-Lei Sang; Zhao-Qing Zhang

    2005-01-01

    In this paper, a source to source parallelizing complier system, AutoPar, is presentd. The system transforms FORTRAN programs to multi-level hybrid MPI/OpenMP parallel programs. Integrated parallel optimizing technologies are utilized extensively to derive an effective program decomposition in the whole program scope. Other features such as synchronization optimization and communication optimization improve the performance scalability of the generated parallel programs, from both intra-node and inter-node. The system makes great effort to boost automation of parallelization.Profiling feedback is used in performance estimation which is the basis of automatic program decomposition. Performance results for eight benchmarks in NPB1.0 from NAS on an SMP cluster are given, and the speedup is desirable. It is noticeable that in the experiment, at most one data distribution directive and a reduction directive are inserted by the user in BT/SP/LU. The compiler is based on ORC, Open Research Compiler. ORC is a powerful compiler infrastructure, with such features as robustness, flexibility and efficiency. Strong analysis capability and well-defined infrastructure of ORC make the system implementation quite fast.

  7. Respiratory Therapy Technology Program Guide.

    Science.gov (United States)

    Georgia Univ., Athens. Dept. of Vocational Education.

    This guide presents the standard curriculum for technical institutes in Georgia. The curriculum addresses the minimum competencies for a respiratory therapy technology program. The guide contains four sections. The General Information section contains an introduction giving an overview and defining the purpose and objectives, a program…

  8. A Chemical Technology Program Partnership

    Science.gov (United States)

    Hicks, Gary

    1998-01-01

    Brazosport College would be the first to admit that they owe the success of their Chemical Technology Program to the partnership that was developed between the college and the surrounding chemical industry. The college is a two-year institution located near the Texas Gulf Coast with more than twelve chemical companies in the immediate area. Dow Chemical is the largest, employing more than 5,000. Currently, the Science Department at Brazosport College offers associate of science degrees in biology, chemistry, and physics, and associate of applied science degrees in chemical technology and instrumentation technology to meet the needs of these industries. In addition, many students enroll in classes to prepare for specific occupations or to build their skills for employment. This may only require the student to take a few courses. The current Chemical Technology Program addresses skills needed for both laboratory and process technician jobs in the chemical industry. An Associate of Applied Science Degree in Chemical Technology is offered with either a laboratory or a process option. These programs were developed with input from the chemical industry, and the college trains all new process employees for BASF and Dow. Additionally, the college does customized flexible-entry training in process operations and laboratory analysis for these and several other companies.

  9. Emerging Technologies Integrating Technology into Study Abroad

    Science.gov (United States)

    Godwin-Jones, Robert

    2016-01-01

    "Ready access to travel and to technology-enhanced social networking (e.g., Facebook or Skype) has changed the nature of study abroad to the point where today's experiences are fundamentally different from those of earlier eras" (Kinginger, 2013a, p. 345). In addition to more travel options and greater technology availability, study…

  10. TECHNOLOGY SOLUTIONS FOR WIND INTEGRATION IN ERCOT

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2015-01-03

    Texas has for more than a decade led all other states in the U.S. with the most wind generation capacity on the U.S. electric grid. The State recognized the value that wind energy could provide, and committed early on to build out the transmission system necessary to move power from the windy regions in West Texas to the major population centers across the state. It also signaled support for renewables on the grid by adopting an aggressive renewable portfolio standard (RPS). The joining of these conditions with favorable Federal tax credits has driven the rapid growth in Texas wind capacity since its small beginning in 2000. In addition to the major transmission grid upgrades, there have been a number of technology and policy improvements that have kept the grid reliable while adding more and more intermittent wind generation. Technology advancements such as better wind forecasting and deployment of a nodal market system have improved the grid efficiency of wind. Successful large scale wind integration into the electric grid, however, continues to pose challenges. The continuing rapid growth in wind energy calls for a number of technology additions that will be needed to reliably accommodate an expected 65% increase in future wind resources. The Center for the Commercialization of Electric Technologies (CCET) recognized this technology challenge in 2009 when it submitted an application for funding of a regional demonstration project under the Recovery Act program administered by the U.S. Department of Energy1. Under that program the administration announced the largest energy grid modernization investment in U.S. history, making available some $3.4 billion in grants to fund development of a broad range of technologies for a more efficient and reliable electric system, including the growth of renewable energy sources like wind and solar. At that time, Texas was (and still is) the nation’s leader in the integration of wind into the grid, and was investing heavily

  11. Technology solutions for wind integration in Ercot

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2015-02-23

    Texas has for more than a decade led all other states in the U.S. with the most wind generation capacity on the U.S. electric grid. The State recognized the value that wind energy could provide, and committed early on to build out the transmission system necessary to move power from the windy regions in West Texas to the major population centers across the state. It also signaled support for renewables on the grid by adopting an aggressive renewable portfolio standard (RPS). The joining of these conditions with favorable Federal tax credits has driven the rapid growth in Texas wind capacity since its small beginning in 2000. In addition to the major transmission grid upgrades, there have been a number of technology and policy improvements that have kept the grid reliable while adding more and more intermittent wind generation. Technology advancements such as better wind forecasting and deployment of a nodal market system have improved the grid efficiency of wind. Successful large scale wind integration into the electric grid, however, continues to pose challenges. The continuing rapid growth in wind energy calls for a number of technology additions that will be needed to reliably accommodate an expected 65% increase in future wind resources. The Center for the Commercialization of Electric Technologies (CCET) recognized this technology challenge in 2009 when it submitted an application for funding of a regional demonstration project under the Recovery Act program administered by the U.S. Department of Energy1. Under that program the administration announced the largest energy grid modernization investment in U.S. history, making available some $3.4 billion in grants to fund development of a broad range of technologies for a more efficient and reliable electric system, including the growth of renewable energy sources like wind and solar. At that time, Texas was (and still is) the nation’s leader in the integration of wind into the grid, and was investing heavily

  12. Technology solutions for wind integration in ERCOT

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2015-01-03

    Texas has for more than a decade led all other states in the U.S. with the most wind generation capacity on the U.S. electric grid. The State recognized the value that wind energy could provide, and committed early on to build out the transmission system necessary to move power from the windy regions in West Texas to the major population centers across the state. It also signaled support for renewables on the grid by adopting an aggressive renewable portfolio standard (RPS). The joining of these conditions with favorable Federal tax credits has driven the rapid growth in Texas wind capacity since its small beginning in 2000. In addition to the major transmission grid upgrades, there have been a number of technology and policy improvements that have kept the grid reliable while adding more and more intermittent wind generation. Technology advancements such as better wind forecasting and deployment of a nodal market system have improved the grid efficiency of wind. Successful large scale wind integration into the electric grid, however, continues to pose challenges. The continuing rapid growth in wind energy calls for a number of technology additions that will be needed to reliably accommodate an expected 65% increase in future wind resources. The Center for the Commercialization of Electric Technologies (CCET) recognized this technology challenge in 2009 when it submitted an application for funding of a regional demonstration project under the Recovery Act program administered by the U.S. Department of Energy1. Under that program the administration announced the largest energy grid modernization investment in U.S. history, making available some $3.4 billion in grants to fund development of a broad range of technologies for a more efficient and reliable electric system, including the growth of renewable energy sources like wind and solar. At that time, Texas was (and still is) the nation’s leader in the integration of wind into the grid, and was investing heavily

  13. An Integrated Business and Technology Curriculum: Oil and Water?

    Science.gov (United States)

    Hodges, Hillary Jean

    2011-01-01

    Technology in every form has become an important part of everyday life. In business, it is a necessity for success and survival. Many authors (Kotrlik & Redmann, 2009; Ma & Runyon (2004), among others) in the arena of higher education have pointed out the need for truly integrated business and technology programs at the graduate level, but…

  14. Market Integration, Choice of Technology and Welfare

    DEFF Research Database (Denmark)

    Hansen, Jørgen Drud; Nielsen, Jørgen Ulff-Møller

    2010-01-01

    This paper develops an international trade model where firms in a duopoly may diversify their technologies for strategic reasons. The firms face the same set of technologies given by a tradeoff between marginal costs and fixed costs, but depending on trade costs firms may choose different...... technologies. Market integration may induce a technological restructuring where firms either diversify their technologies or switch to a homogeneous technology. In general, market integration improves welfare. However, a small decrease of trade costs which induces a switch from heterogeneous technologies...

  15. Understanding Technology Literacy: A Framework for Evaluating Educational Technology Integration

    Science.gov (United States)

    Davies, Randall S.

    2011-01-01

    Federal legislation in the United States currently mandates that technology be integrated into school curricula because of the popular belief that learning is enhanced through the use of technology. The challenge for educators is to understand how best to teach with technology while developing the technological expertise of their students. This…

  16. Making Room: Integrating Geo-Technologies into Teacher Education

    Science.gov (United States)

    Gatrell, Jay D.

    2004-01-01

    Geo-educators focus on content standards, particularly the 1994 "Geography for Life" standards, as the primary rationale for integrating geo-spatial technologies into preservice teacher education programs. In this paper, an alternative framework is proposed to infuse GIS and GIScience into existing teacher education programs. Specifically, the…

  17. Building Technologies Research and Integration Center (BTRIC)

    Data.gov (United States)

    Federal Laboratory Consortium — The Building Technologies Research and Integration Center (BTRIC), in the Energy and Transportation Science Division (ETSD) of Oak Ridge National Laboratory (ORNL),...

  18. Technology Integration: A Best Practice Perspective

    Science.gov (United States)

    Lesisko, Lee J.; Wright, Robert J.; O'Hern, Brenda

    2010-01-01

    The technology coordinator has the responsibility of collaborating with school leaders and educators to integrate technology into the curriculum and operations of the school. Not only does this individual have to understand how technology works, but also must determine the best way to infuse it in a school setting. Technology leaders must possess…

  19. Web Modules: Integrating Curricula and Technology Standards

    Science.gov (United States)

    Dawson, Carol

    2008-01-01

    The purposes of this article are to provide the sequence of learning events about the integration of curricula and technology using modules prepared by the Southeast Teachers Are Revitalizing Teaching Through Technology (START) Technology Team and to describe the impact these technology modules had on university faculty and candidates at Alabama…

  20. Space Propulsion Technology Program Overview

    Science.gov (United States)

    Escher, William J. D.

    1991-01-01

    The topics presented are covered in viewgraph form. Focused program elements are: (1) transportation systems, which include earth-to-orbit propulsion, commercial vehicle propulsion, auxiliary propulsion, advanced cryogenic engines, cryogenic fluid systems, nuclear thermal propulsion, and nuclear electric propulsion; (2) space platforms, which include spacecraft on-board propulsion, and station keeping propulsion; and (3) technology flight experiments, which include cryogenic orbital N2 experiment (CONE), SEPS flight experiment, and cryogenic orbital H2 experiment (COHE).

  1. Integrating technology education concepts into China's educational system

    Science.gov (United States)

    Yang, Faxian

    The problem of this study was to develop a strategy for integrating technology education concepts within the Chinese mathematics and science curricula. The researcher used a case study as the basic methodology. It included three methods for collecting data: literature review, field study in junior and senior secondary schools in America and China, and interviews with experienced educators who were familiar with the status of technology education programs in the selected countries. The data came from the following areas: Japan, Taiwan, the United Kingdom, China, and five states in the United States: Illinois, Iowa, Maryland, Massachusetts, and New York. The researcher summarized each state and country's educational data, identified the advantages and disadvantages of their current technology education program, and identified the major concepts within each program. The process determined that identified concepts would be readily acceptable into the current Chinese educational system. Modernization of, industry, agriculture, science and technology, and defense have been recent objectives of the Chinese government. Therefore, Chinese understanding of technology, or technology education, became important for the country. However, traditional thought and culture curb the implementation of technology education within China's current education system. The proposed solution was to integrate technology education concepts into China's mathematics and science curricula. The purpose of the integration was to put new thoughts and methods into the current educational structure. It was concluded that the proposed model and interventions would allow Chinese educators to carry out the integration into China's education system.

  2. 20 CFR 220.64 - Program integrity.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Program integrity. 220.64 Section 220.64... DISABILITY Consultative Examinations § 220.64 Program integrity. The Board will not use in its program any... for reasons bearing on professional competence, professional conduct, or financial integrity; who has...

  3. Space Technology Mission Directorate Game Changing Development Program FY2015 Annual Program Review: Advanced Manufacturing Technology

    Science.gov (United States)

    Vickers, John; Fikes, John

    2015-01-01

    The Advance Manufacturing Technology (AMT) Project supports multiple activities within the Administration's National Manufacturing Initiative. A key component of the Initiative is the Advanced Manufacturing National Program Office (AMNPO), which includes participation from all federal agencies involved in U.S. manufacturing. In support of the AMNPO the AMT Project supports building and Growing the National Network for Manufacturing Innovation through a public-private partnership designed to help the industrial community accelerate manufacturing innovation. Integration with other projects/programs and partnerships: STMD (Space Technology Mission Directorate), HEOMD, other Centers; Industry, Academia; OGA's (e.g., DOD, DOE, DOC, USDA, NASA, NSF); Office of Science and Technology Policy, NIST Advanced Manufacturing Program Office; Generate insight within NASA and cross-agency for technology development priorities and investments. Technology Infusion Plan: PC; Potential customer infusion (TDM, HEOMD, SMD, OGA, Industry); Leverage; Collaborate with other Agencies, Industry and Academia; NASA roadmap. Initiatives include: Advanced Near Net Shape Technology Integrally Stiffened Cylinder Process Development (launch vehicles, sounding rockets); Materials Genome; Low Cost Upper Stage-Class Propulsion; Additive Construction with Mobile Emplacement (ACME); National Center for Advanced Manufacturing.

  4. Integrated environmentally compatible soldering technologies. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Hosking, F.M.; Frear, D.R.; Iman, R.L.; Keicher, D.M.; Lopez, E.P.; Peebles, H.C.; Sorensen, N.R.; Vianco, P.T.

    1994-05-01

    Chemical fluxes are typically used during conventional electronic soldering to enhance solder wettability. Most fluxes contain very reactive, hazardous constituents that require special storage and handling. Corrosive flux residues that remain on soldered parts can severely degrade product reliability. The residues are removed with chlorofluorocarbon (CFC), hydrochlorofluorocarbon (HCFC), or other hazardous solvents that contribute to ozone depletion, release volatile organic compounds into the atmosphere, or add to the solvent waste stream. Alternative materials and processes that offer the potential for the reduction or elimination of cleaning are being developed to address these environmental issues. Timing of the effort is critical, since the targeted chemicals will soon be heavily taxed or banned. DOE`s Office of Environmental Restoration and Waste Management (DOE/EM) has supported Sandia National Laboratories` Environmentally Conscious Manufacturing Integrated Demonstration (ECMID). Part of the ECM program involves the integration of several environmentally compatible soldering technologies for assembling electronics devices. Fluxless or {open_quotes}low-residue/no clean{close_quotes} soldering technologies (conventional and ablative laser processing, controlled atmospheres, ultrasonic tinning, protective coatings, and environmentally compatible fluxes) have been demonstrated at Sandia (SNL/NM), the University of California at Berkeley, and Allied Signal Aerospace-Kansas City Division (AS-KCD). The university demonstrations were directed under the guidance of Sandia staff. Results of the FY93 Soldering ID are presented in this report.

  5. The Impact of a Technology Integration Academy on Instructional Technology Integration in a Texas School District

    Science.gov (United States)

    Burkholder, Karla

    2013-01-01

    This applied dissertation was designed to determine the impact of a technology integration professional development on high school teachers' technology integration and students' use of computers in core content areas. The District invested in technology for all classrooms, as well as 1:1 technology for all secondary students with an expectation…

  6. IPIRG programs - advances in pipe fracture technology

    Energy Technology Data Exchange (ETDEWEB)

    Wilkowski, G.; Olson, R.; Scott, P. [Batelle, Columbus, OH (United States)

    1997-04-01

    This paper presents an overview of the advances made in fracture control technology as a result of the research performed in the International Piping Integrity Research Group (IPIRG) program. The findings from numerous experiments and supporting analyses conducted to investigate the behavior of circumferentially flawed piping and pipe systems subjected to high-rate loading typical of seismic events are summarized. Topics to be discussed include; (1) Seismic loading effects on material properties, (2) Piping system behavior under seismic loads, (3) Advances in elbow fracture evaluations, and (4) {open_quotes}Real{close_quotes} piping system response. The presentation for each topic will be illustrated with data and analytical results. In each case, the state-of-the-art in fracture mechanics prior to the first IPIRG program will be contrasted with the state-of-the-art at the completion of the IPIRG-2 program.

  7. Technology and Environmental Education: An Integrated Curriculum

    Science.gov (United States)

    Willis, Jana M.; Weiser, Brenda

    2005-01-01

    Preparing teacher candidates to integrate technology into their future classrooms effectively requires experience in instructional planning that utilizes technology to enhance student learning. Teacher candidates need to work with curriculum that supports a variety of technologies. Using Project Learning Tree and environmental education (EE),…

  8. Strengthening 4-H Program Communication through Technology

    Science.gov (United States)

    Robideau, Kari; Santl, Karyn

    2011-01-01

    Advances in technology are transforming how youth and parents interact with programs. The Strengthening 4-H Communication through Technology project was implemented in eight county 4-H programs in Northwest Minnesota. This article outlines the intentional process used to effectively implement technology in program planning. The project includes:…

  9. 75 FR 1591 - Green Technology Pilot Program

    Science.gov (United States)

    2010-01-12

    ... Patent and Trademark Office Green Technology Pilot Program ACTION: Proposed collection; comment request...@uspto.gov . Include A0651-0062 Green Technology Pilot Program comment@ in the subject line of the... examination pilot program for patent applications pertaining to green technologies, including greenhouse...

  10. Integral Fast Reactor Program annual progress report, FY 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-06-01

    This report summarizes highlights of the technical progress made in the Integral Fast Reactor (IFR) Program in FY 1991. Technical accomplishments are presented in the following areas of the IFR technology development activities: (1) metal fuel performance, (2) pyroprocess development, (3) safety experiments and analyses, (4) core design development, (5) fuel cycle demonstration, and (6) LMR technology R&D.

  11. Integral Fast Reactor Program annual progress report, FY 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-06-01

    This report summarizes highlights of the technical progress made in the Integral Fast Reactor (IFR) Program in FY 1991. Technical accomplishments are presented in the following areas of the IFR technology development activities: (1) metal fuel performance, (2) pyroprocess development, (3) safety experiments and analyses, (4) core design development, (5) fuel cycle demonstration, and (6) LMR technology R D.

  12. Integral Fast Reactor Program annual progress report, FY 1994

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Y.I.; Walters, L.C.; Laidler, J.J.; Pedersen, D.R.; Wade, D.C.; Lineberry, J.J.

    1994-12-01

    This report summarizes highlights of the technical progress made in the Integral Fast Reactor (IFR) Program in FY 1994. Technical accomplishments are presented in the following areas of the IFR technology development activities: metal fuel performance; pyroprocess development; safety experiments and analyses; core design development; fuel cycle demonstration; and LMR technology R&D.

  13. Integral Fast Reactor Program. Annual progress report, FY 1992

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Y.I.; Walters, L.C.; Laidler, J.J.; Pedersen, D.R.; Wade, D.C.; Lineberry, M.J.

    1993-06-01

    This report summarizes highlights of the technical progress made in the Integral Fast Reactor (IFR) Program in FY 1992. Technical accomplishments are presented in the following areas of the IFR technology development activities: (1) metal fuel performance, (2) pyroprocess development, (3) safety experiments and analyses, (4) core design development, (5) fuel cycle demonstration, and (6) LMR technology R&D.

  14. Integral Fast Reactor Program. Annual progress report, FY 1993

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Y.I.; Walters, L.C.; Laidler, J.J.; Pedersen, D.R.; Wade, D.C.; Lineberry, M.J.

    1994-10-01

    This report summarizes highlights of the technical progress made in the Integral Fast Reactor (IFR) Program in FY 1993. Technical accomplishments are presented in the following areas of the IFR technology development activities: (1) metal fuel performance, (2) pyroprocess development, (3) safety experiments and analyses, (4) core design development, (5) fuel cycle demonstration, and (6) LMR technology R and D.

  15. Technology Integration: What Happens Now?

    Science.gov (United States)

    Merillat, Linda; Holvoet, Jennifer; Adams, Doug

    2007-01-01

    As changes in federal funding spell the end of the network of Regional Technology in Education Consortia (R*TEC), the authors, who are staff members of the Advanced Learning Technologies project at the University of Kansas Center for Research on Learning, discuss resources left in R*TEC's wake. Many of these resources are still available and can…

  16. Integrated Biomaterials for Biomedical Technology

    CERN Document Server

    Ramalingam, Murugan; Ramakrishna, Seeram; Kobayashi, Hisatoshi

    2012-01-01

    This cutting edge book provides all the important aspects dealing with the basic science involved in materials in biomedical technology, especially structure and properties, techniques and technological innovations in material processing and characterizations, as well as the applications. The volume consists of 12 chapters written by acknowledged experts of the biomaterials field and covers a wide range of topics and applications.

  17. Sustaining integrated technology in undergraduate mathematics

    Science.gov (United States)

    Oates, Greg

    2011-09-01

    The effective integration of technology into the teaching and learning of mathematics remains one of the critical challenges facing contemporary tertiary mathematics. This article reports on some significant findings of a wider study investigating the use of technology in undergraduate mathematics. It first discusses a taxonomy developed to describe and compare technology use within individual courses and departments that identifies a complex range of factors, summarized under six defining characteristics of an integrated technology mathematics curriculum (ITMC). An instrument for a simple comparison of technology use employing the elements of this taxonomy is provided. It then presents evidence gathered from an observational study of technology implementation at The University of Auckland, and examines this evidence against the taxonomy. The findings suggest that while the underlying complexity of the taxonomy limits a categorical definition of integrated technology, it does provide an effective means for examining the issues confronting those wishing to implement and sustain integrated technology in undergraduate mathematics. An integrated, holistic approach, which aims for curricular consistency across all the characteristics described in the taxonomy, provides the basis for a more effective and sustainable ITMC. Key findings, some of which will be considered in more detail in this discussion, include: the importance of mandating technology use in official departmental policy; paying attention to consistency and fairness in assessment; re-evaluating the value of topics in the curriculum; re-establishing the goals of undergraduate courses; and developing the pedagogical technical knowledge of teaching staff.

  18. Clean Coal Technology Demonstration Program: Program Update 1998

    Energy Technology Data Exchange (ETDEWEB)

    Assistant Secretary for Fossil Energy

    1999-03-01

    Annual report on the Clean Coal Technology Demonstration Program (CCT Program). The report address the role of the CCT Program, implementation, funding and costs, accomplishments, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

  19. Clean Coal Technology Demonstration Program: Program Update 2000

    Energy Technology Data Exchange (ETDEWEB)

    Assistant Secretary for Fossil Energy

    2001-04-01

    Annual report on the Clean Coal Technology Demonstration Program (CCT Program). The report address the role of the CCT Program, implementation, funding and costs, accomplishments, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

  20. Clean Coal Technology Demonstration Program: Program Update 2001

    Energy Technology Data Exchange (ETDEWEB)

    Assistant Secretary for Fossil Energy

    2002-07-30

    Annual report on the Clean Coal Technology Demonstration Program (CCT Program). The report address the role of the CCT Program, implementation, funding and costs, accomplishments, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results. Also includes Power Plant Improvement Initiative Projects.

  1. 75 FR 66831 - Program Integrity Issues

    Science.gov (United States)

    2010-10-29

    ... institution must prominently provide the information it is required to disclose about a program in a simple... Education 34 CFR Parts 600, 602, 603, et al. Program Integrity Issues; Final Rule #0;#0;Federal Register... CFR Parts 600, 602, 603, 668, 682, 685, 686, 690, and 691 RIN 1840-AD02 Program Integrity Issues...

  2. NFORMATION TECHNOLOGIES IN INTEGRATED LOGISTICS

    National Research Council Canada - National Science Library

    Karolina S Prokopovic; Tijana B Prokopovic; Miloje A Jelic

    2016-01-01

      The rapid development of the Internet and the use of new possibilities which the digital technologies have brought about, have made significant changes in all the areas of business, including logistics...

  3. Building Technologies Program Multi-Year Program Plan Technology Validation and Market Introduction 2008

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2008-01-01

    Building Technologies Program Multi-Year Program Plan 2008 for technology validation and market introduction, including ENERGY STAR, building energy codes, technology transfer application centers, commercial lighting initiative, EnergySmart Schools, EnergySmar

  4. TECHNOLOGY INTEGRATION EFFECTS ON TEACHERS’ ACHIEVEMENT

    Directory of Open Access Journals (Sweden)

    Naji SALEH

    2015-04-01

    Full Text Available This article investigates the effects of technology integration on teachers’ achievement. The previous literature in this regard was reviewed and a sample of teachers was chosen from 7-9 grade teachers. The sample consisted of 50 teachers males and females with different years of experience and different number of training courses. The questionnaire included paragraphs about the effect of technology integration on their achievement in school and in teaching. The results showed a great effect of technology integration on teachers’ achievement. The results also showed no differences attributed to teacher’s gender and that there were differences attributed to teacher’s years of experience and number of training courses. The article shows the aspects in which the achievement of teachers was influenced by technology integration.

  5. Toward Technology Integration in Mathematics Education: A Technology-Integration Course Planning Assignment

    Science.gov (United States)

    Kersaint, Gladis

    2007-01-01

    This article describes a technology integration course planning assignment that was developed to enhance preservice teachers' technological pedagogical content knowledge (TPCK). This assignment required preservice teachers work with peers to integrate various technological tools (e.g., graphing calculators, web-based mathematics applets, etc) in a…

  6. Technologies for 3D Heterogeneous Integration

    CERN Document Server

    Wolf, Jürgen; Klumpp, Armin; Reichl, H

    2008-01-01

    3D-Integration is a promising technology towards higher interconnect densities and shorter wiring lengths between multiple chip stacks, thus achieving a very high performance level combined with low power consumption. This technology also offers the possibility to build up systems with high complexity just by combining devices of different technologies. For ultra thin silicon is the base of this integration technology, the fundamental processing steps will be described, as well as appropriate handling concepts. Three main concepts for 3D integration have been developed at IZM. The approach with the greatest flexibility called Inter Chip Via - Solid Liquid Interdiffusion (ICV-SLID) is introduced. This is a chip-to-wafer stacking technology which combines the advantages of the Inter Chip Via (ICV) process and the solid-liquid-interdiffusion technique (SLID) of copper and tin. The fully modular ICV-SLID concept allows the formation of multiple device stacks. A test chip was designed and the total process sequenc...

  7. Navy Collaborative Integrated Information Technology Initiative

    Science.gov (United States)

    2007-11-02

    Information Technology Initiative (NAVCIITI, pronounced "NAV city") by creating an Advanced Communication and Information Technology Center (ACITC), on campus at Virginia Tech, integrating and leveraging the efforts of more than 60 investigators currently under contract to the Navy by providing equipment and facilities for their effort, and using the collective capabilities of NAVCIITI to support Navy initiatives in distributed computing, integrated services training, education, information dissemination, and simulation, especially for purposes

  8. Vertical Integration and Technology: Theory and Evidence

    OpenAIRE

    Daron Acemoglu; Philippe Aghion; Rachel Griffith; Fabrizio Zilibotti

    2004-01-01

    This paper investigates the determinants of vertical integration using data from the UK manufacturing sector. We find that the relationship between a downstream (producer) industry and an upstream (supplier) industry is more likely to be vertically integrated when the producing industry is more technology intensive and the supplying industry is less technology intensive. Moreover, both of these effects are stronger when the supplying industry accounts for a large fraction of the producer's co...

  9. ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) PROGRAM: GREEN BUILDING TECHNOLOGIES

    Science.gov (United States)

    The U.S. Environmental Protection Agency (EPA) Environmental Technology Verification (ETV) Program evaluates the performance of innovative air, water, pollution prevention and monitoring technologies that have the potential to improve human health and the environment. This techno...

  10. A Model of Teacher Professional Development to Support Technology Integration

    Science.gov (United States)

    Ehman, Lee; Bonk, Curt; Yamagata-Lynch, Lisa

    2005-01-01

    The purpose of this paper is to report on the professional development model of Teacher Institute for Curriculum Knowledge about Integration of Technology (TICKIT). This paper will situate the TICKIT model with past findings from professional development research, and provide researchers and practitioners facilitating future programs advice based…

  11. Integrated reliability program for Scout research vehicle.

    Science.gov (United States)

    Morris, B. V.; Welch, R. C.

    1967-01-01

    Integrated reliability program for Scout launch vehicle in terms of design specification, review functions, malfunction reporting, failed parts analysis, quality control, standardization and certification

  12. Integration of technology in the school curriculum

    Science.gov (United States)

    Treagust, David F.

    1990-01-01

    This paper describes, chronologically, the deliberations of a school staff in their decision-making to place technology education in their school. The outcome of these deliberations is a curriculum model whereby objectives of technology awareness, technological literacy, technological capability and transferable skills are integrated with all subjects in the school. The desired outcome is that students at this school will gain a technological education by, for example, attending classes in English, Home Economics, Mathematics, Social Studies, Science and Art. The implementation process is ongoing, is being evaluated and has already experienced senior staff changes and industrial disruption without loss of vigour or intent.

  13. Integrated Micro Product and Technology Development

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard

    2003-01-01

    The paper addresses the issues of integrated micro product and technology development. The implications of the decisions in the design phase on the subsequent manufacturing processes are considered vital. A coherent process chain is a necessary prerequisite for the realisation of the industrial...... potential of micro technology....

  14. Integrated Micro Product and Technology Development

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard

    2003-01-01

    The paper addresses the issues of integrated micro product and technology development. The implications of the decisions in the design phase on the subsequent manufacturing processes are considered vital. A coherent process chain is a necessary prerequisite for the realisation of the industrial...... potential of micro technology....

  15. Cases on Technology Integration in Mathematics Education

    Science.gov (United States)

    Polly, Drew, Ed.

    2015-01-01

    Common Core education standards establish a clear set of specific ideas and skills that all students should be able to comprehend at each grade level. In an effort to meet these standards, educators are turning to technology for improved learning outcomes. "Cases on Technology Integration in Mathematics Education" provides a compilation…

  16. A Senior Teacher's Implementation of Technology Integration

    Science.gov (United States)

    Tsai, Hsien-Chang

    2015-01-01

    This study investigated whether a senior teacher with many years of teaching experience, despite lacking adequate technology skills or contending with other barriers, can sufficiently implement technology integration in the classroom. The research was conducted between October 2013 and January 2014 and was focused on a junior high school biology…

  17. Student Technology Competencies for School Counseling Programs.

    Science.gov (United States)

    Hines, Peggy LaTurno

    2002-01-01

    This article briefly reviews the growth of technology and the development of standards related to technology in counseling, Pre-K-12 education, educator preparation programs, and the field of school counseling. The development of pre-admission and program outcome technology skills at Indiana State University is discussed along with the specific…

  18. Wood energy Technology Program; Puuenergian teknologiaohjelma

    Energy Technology Data Exchange (ETDEWEB)

    Hakkila, P. [VTT Energy, Espoo (Finland)

    1999-07-01

    The National Wood Energy Technology Program focuses on developing the production technology and improving the quality of forest chips from logging residues and small- sized trees. In 1998, energy use of forest chips in Finland amounted to 0.5 million solid-m{sup 3}. The main research areas of the program are: integration of energy production into industrial wood production in the conventional forestry; development of planning and logistics in the production and storage of forest chips; development of technology for chipping, handling and storage including operations at chip terminals and at the end-users facilities; development of long-distance transport of fuel chips and unchipped forest residues; preparing forest machine and truck contractors for the production of forest chips on a large scale; development of quality control to improve the heat value of the chips; and the operational reliability of wood chip-fired plants improving the handling and combustion properties of bark, sawdust and other solid wood residues from forest industry. The total budget for 1999 - 2003 is million FIM 250, Tekes' share of which amounts to million FIM 50.

  19. 75 FR 64692 - Green Technology Pilot Program

    Science.gov (United States)

    2010-10-20

    ... Patent and Trademark Office Green Technology Pilot Program ACTION: Proposed collection; comment request...: ] E-mail: InformationCollection@uspto.gov . Include ``0651- 0062 Green Technology Pilot Program... Office (USPTO) implemented a pilot program on December 8, 2009, that permits patent...

  20. Integrated optics theory and technology

    CERN Document Server

    Hunsperger, Robert G

    1984-01-01

    Our intent in producing this book was to provide a text that would be comprehensive enough for an introductory course in integrated optics, yet concise enough in its mathematical derivations to be easily readable by a practicing engineer who desires an overview of the field. The response to the first edition has indeed been gratifying; unusually strong demand has caused it to be sold out during the initial year of publication, thus providing us with an early opportunity to produce this updated and improved second edition. This development is fortunate, because integrated optics is a very rapidly progressing field, with significant new research being regularly reported. Hence, a new chapter (Chap. 17) has been added to review recent progress and to provide numerous additional references to the relevant technical literature. Also, thirty-five new problems for practice have been included to supplement those at the ends of chapters in the first edition. Chapters I through 16 are essentially unchanged, except for ...

  1. Clean Coal Technology Programs: Program Update 2003 (Volume 1)

    Energy Technology Data Exchange (ETDEWEB)

    Assistant Secretary for Fossil Energy

    2003-12-01

    Annual report on the Clean Coal Technology Demonstration Program (CCTDP), Power Plant Improvement Initiative (PPII), and Clean Coal Power Initiative (CCPI). The report addresses the roles of the programs, implementation, funding and costs, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

  2. Integrative production technology theory and applications

    CERN Document Server

    Özdemir, Denis

    2017-01-01

    This contributed volume contains the research results of the Cluster of Excellence “Integrative Production Technology for High-Wage Countries”, funded by the German Research Society (DFG). The approach to the topic is genuinely interdisciplinary, covering insights from fields such as engineering, material sciences, economics and social sciences. The book contains coherent deterministic models for integrative product creation chains as well as harmonized cybernetic models of production systems. The content is structured into five sections: Integrative Production Technology, Individualized Production, Virtual Production Systems, Integrated Technologies, Self-Optimizing Production Systems and Collaboration Productivity.The target audience primarily comprises research experts and practitioners in the field of production engineering, but the book may also be beneficial for graduate students. .

  3. 75 FR 22553 - Technology Innovation Program Advisory Board

    Science.gov (United States)

    2010-04-29

    ... National Institute of Standards and Technology Technology Innovation Program Advisory Board AGENCY.... SUMMARY: The Technology Innovation Program Advisory Board, National Institute of Standards and Technology... Technology Innovation Program (TIP) Advisory Board is composed of ten members appointed by the Director...

  4. TESOL Technology Standards: Description, Implementation, Integration

    Science.gov (United States)

    Teachers of English to Speakers of Other Languages, Inc. (TESOL), 2011

    2011-01-01

    The "TESOL Technology Standards" are applicable in a wide range of contexts: foreign language, second language, child, teen, adult, higher education, vocational education, language for specific purposes, and fully online programs; and in settings with low, medium, or high resources and access to communication technologies. Students, teachers,…

  5. Beam Technologies for Integrated Processing

    Science.gov (United States)

    1992-03-01

    Ta20 5 Refractory Nitrides (e.g., NbN) X,++ N,+ (7.5) Nb X.+ N2 Other materials Lead Pb,Zr,Ti Ar + 02 zirconium oxide ceramic titanate (PZT) Ar4 (2.0... nanosize powders similar to other powder forming processes, which subsequently can be incorporated into a fully integrated process. A potentially important...and reactive evaporation (RE) processes to aid in the deposition of more refractory materials such as nitrides, carbides, and high-temperature oxides

  6. Division of Environmental Control Technology program, 1977

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-06-01

    Environmental engineering programs are reviewed for the following technologies; coal; petroleum and gas; oil shale; solar; geothermal and energy conservation; nuclear energy; and decontamination and decommissioning. Separate abstracts were prepared for each technology. (MHR)

  7. ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) PROGRAM: FUEL CELLS

    Science.gov (United States)

    The U.S. Environmental Protection Agency (EPA) Environmental Technology Verification (ETV) Program evaluates the performance of innovative air, water, pollution prevention and monitoring technologies that have the potential to improve human health and the environment. This techno...

  8. ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) PROGRAM CASE STUDIES: DEMONSTRATING PROGRAM OUTCOMES

    Science.gov (United States)

    The U.S. Environmental Protection Agency (EPA) Environmental Technology Verification (ETV) Program evaluates the performance of innovative air, water, pollution prevention and monitoring technologies that have the potential to improve human health and the environment. This bookle...

  9. Integrating technologies for scalable ecology and conservation

    Directory of Open Access Journals (Sweden)

    David C. Marvin

    2016-07-01

    Full Text Available Integration of multiple technologies greatly increases the spatial and temporal scales over which ecological patterns and processes can be studied, and threats to protected ecosystems can be identified and mitigated. A range of technology options relevant to ecologists and conservation practitioners are described, including ways they can be linked to increase the dimensionality of data collection efforts. Remote sensing, ground-based, and data fusion technologies are broadly discussed in the context of ecological research and conservation efforts. Examples of technology integration across all of these domains are provided for large-scale protected area management and investigation of ecological dynamics. Most technologies are low-cost or open-source, and when deployed can reach economies of scale that reduce per-area costs dramatically. The large-scale, long-term data collection efforts presented here can generate new spatio-temporal understanding of threats faced by natural ecosystems and endangered species, leading to more effective conservation strategies.

  10. Guiding healthcare technology implementation: a new integrated technology implementation model.

    Science.gov (United States)

    Schoville, Rhonda R; Titler, Marita G

    2015-03-01

    Healthcare technology is used to improve delivery of safe patient care by providing tools for early diagnosis, ongoing monitoring, and treatment of patients. This technology includes bedside physiologic monitors, pulse oximetry devices, electrocardiogram machines, bedside telemetry, infusion pumps, ventilators, and electronic health records. Healthcare costs are a challenge for society, and hospitals are pushed to lower costs by discharging patients sooner. Healthcare technology is being used to facilitate these early discharges. There is little understanding of how healthcare facilities purchase, implement, and adopt technology. There are two areas of theories and models currently used when investigating technology: technology adoption and implementation science. Technology adoption focuses mainly on how the end users adopt technology, whereas implementation science describes methods, interventions, and variables that promote the use of evidence-based practice. These two approaches are not well informed by each other. In addition, amplifying the knowledge gap is the limited conceptualization of healthcare technology implementation frameworks. To bridge this gap, an all-encompassing model is needed. To understand the key technology implementation factors utilized by leading healthcare facilities, the prevailing technology adoption and implementation science theories and models were reviewed. From this review, an integrated technology implementation model will be set forth.

  11. 78 FR 17598 - Program Integrity Issues

    Science.gov (United States)

    2013-03-22

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF EDUCATION 34 CFR Parts 600, 602, 603, 668, 682, 685, 686, 690, and 691 RIN 1840-AD02 Program Integrity Issues... Register final regulations for improving integrity in the programs authorized under title IV of the Higher...

  12. 76 FR 20534 - Program Integrity Issues

    Science.gov (United States)

    2011-04-13

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF EDUCATION 34 CFR Parts 600, 602, 603, 668, 682, 685, 686, 690, and 691 RIN 1840-AD02 Program Integrity Issues...) final regulations for improving integrity in the programs authorized under title IV of the Higher...

  13. 42 CFR 460.68 - Program integrity.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Program integrity. 460.68 Section 460.68 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED...) PACE Administrative Requirements § 460.68 Program integrity. (a) Persons with criminal convictions. A...

  14. 75 FR 43615 - Program Integrity: Gainful Employment

    Science.gov (United States)

    2010-07-26

    ... Education 34 CFR Part 668 Program Integrity: Gainful Employment; Proposed Rule #0;#0;Federal Register / Vol... RIN 1840-AD04 Program Integrity: Gainful Employment AGENCY: Office of Postsecondary Education... against the education and training (and increased employment income) that higher education can provide....

  15. The NASA space power technology program

    Science.gov (United States)

    Stephenson, R. Rhoads

    NASA has a broad technology program in the field of space power. This paper describes that program, including the roles and responsibilities of the various NASA field centers and major contractors. In the power source area, the paper discusses the SP-100 Space Nuclear Power Project, which has been under way for about seven years and is making substantial progress toward development of components for a 100-kilowatt power system that can be scaled to other sizes. This system is a candidate power source for nuclear electric propulsion, as well as for a power plant for a lunar base. In the energy storage area, the paper describes NASA's battery- and fuel-cell development programs. NASA is actively working on NiCd, NiH2, and lithium batteries. A status update is also given on a U.S. Air Force-sponsored program to develop a large (150 ampere-hour) lithium-thionyl chloride battery for the Centaur upper-stage launch vehicle. Finally, the area of power management and distribution (PMAD) is addressed, including power system components such as solid-state switches and power integrated circuits. Automated load management and other computer-controlled functions offer considerable payoffs. The state of the art in space power is described, along with NASA's medium- and long-term goals in the area.

  16. A framework for evaluation of technology transfer programs. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    1993-07-01

    The objective of this volume is to describe a framework with which DOE can develop a program specific methodology to evaluate it`s technology transfer efforts. This approach could also be applied to an integrated private sector technology transfer organization. Several benefits will be realized from the application of this work. While the immediate effect will be to assist program managers in evaluating and improving program performance, the ultimate benefits will accrue to the producing industry, the states, and the nation in the form of sustained or increased domestic oil production. This benefit depends also, of course, on the effectiveness of the technology being transferred. The managers of the Technology Transfer program, and the larger federal oil and gas R&D programs, will be provided with a means to design and assess the effectiveness of program efforts as they are developed, tested and performed. The framework allows deficiencies in critical aspects of the program to be quickly identified, allowing for timely corrections and improvements. The actual process of developing the evaluation also gives the staff of the Oil R&D Program or Technology Transfer subprogram the opportunity to become oriented to the overall program goals. The structure and focus imposed by the evaluation paradigm will guide program staff in selecting activities which are consistent with achieving the goals of the overall R&D program.

  17. Hawaii integrated biofuels research program, phase 1

    Science.gov (United States)

    Takahashi, Patrick K.

    1989-10-01

    Hawaii provides a unique environment for production of biomass resources that can be converted into renewable energy products. The purpose of this work is to evaluate the potential of several biomass resources, including sugarcane, eucalyptus, and leucaena, particularly for utilization in thermochemical conversion processes to produce liquid or gaseous transportation fuels. This research program supports ongoing efforts of the Biofuels and Municipal Solid Waste Technology (BMWT) Program of the Department of Energy (DOE) and has goals that are consistent with BMWT. The Hawaii Natural Energy Institute (HNEI) work completed here consists of research activities that support two of the five renewable fuel cycles being pursued by DOE researchers. The results are directly applicable in the American territories throughout the Pacific Basin and the Caribbean, and also to many parts of the United States and worldwide. The Hawaii Integrated Biofuels Research Program is organized into the following six research tasks, which are presented as appendices in report form: Biomass Resource Assessment and System Modeling (Task 1); Bioenergy Tree Research (Task 2); Breeding, Culture, and Selection of Tropical Grasses for Increased Energy Potential (Task 3); Study of Eucalyptus Plantations for Energy Production in Hawaii (Task 4); Fundamental Solvolysis Research (Task 5); and Effects of Feedstock Composition on Pyrolysis Products (Task 6).

  18. Wolfram technologies as an integrated scalable platform for interactive learning

    Science.gov (United States)

    Kaurov, Vitaliy

    2012-02-01

    We rely on technology profoundly with the prospect of even greater integration in the future. Well known challenges in education are a technology-inadequate curriculum and many software platforms that are difficult to scale or interconnect. We'll review an integrated technology, much of it free, that addresses these issues for individuals and small schools as well as for universities. Topics include: Mathematica, a programming environment that offers a diverse range of functionality; natural language programming for getting started quickly and accessing data from Wolfram|Alpha; quick and easy construction of interactive courseware and scientific applications; partnering with publishers to create interactive e-textbooks; course assistant apps for mobile platforms; the computable document format (CDF); teacher-student and student-student collaboration on interactive projects and web publishing at the Wolfram Demonstrations site.

  19. How Programming Fits with Technology Education Curriculum

    Science.gov (United States)

    Wright, Geoffrey A.; Rich, Peter; Leatham, Keith R.

    2012-01-01

    Programming is a fundamental component of modern society. Programming and its applications influence much of how people work and interact. Because of people's reliance on programming in one or many of its applications, there is a need to teach students to be programming literate. Because the purpose of the International Technology and Engineering…

  20. How Programming Fits with Technology Education Curriculum

    Science.gov (United States)

    Wright, Geoffrey A.; Rich, Peter; Leatham, Keith R.

    2012-01-01

    Programming is a fundamental component of modern society. Programming and its applications influence much of how people work and interact. Because of people's reliance on programming in one or many of its applications, there is a need to teach students to be programming literate. Because the purpose of the International Technology and Engineering…

  1. GRAMMATICAL INSTRUCTION IN THE TECHNOLOGICAL ERA: INVESTIGATING DIFFERENT APPROACHES TO THE TEACHING AND LEARNING OF ENGLISH IN AN INTEGRATED HIGH SCHOOL PROGRAM

    Directory of Open Access Journals (Sweden)

    Gicele Vergine PREBIANCA

    2014-06-01

    Full Text Available The main aim of the study is to investigate the contribution of the use of technological resources to teach English as a foreign language (FL. More specifically, the study focuses on the learning of a syntactic structure by means of grammatical instruction provided in two environments: a traditional classroom and a virtual learning environment - the MOODLE platform. A secondary aim is to assess participants’ level of satisfaction concerning the activities implemented in MOODLE. Thirty students enrolled in the second year of the Technical High School Program at a Federal Institute, divided into control and experimental groups, participated in the study. Statistical analyses revealed that participants performed well in the tests for the retention of the syntactic structure. The control group outperformed the experimental one in both retention tests. Results are discussed in light of information processing and SLA theories. Regarding the qualitative analysis, data revealed that, although participants have access to several technological resources, they seem unable to perceive these resources as relevant to FL learning. The study also showed that, in general, participants enjoyed the activities carried out in the MOODLE platform.

  2. Technological Integration of Acquisitions in Digital Industries

    DEFF Research Database (Denmark)

    Henningsson, Stefan; Toppenberg, Gustav

    2015-01-01

    challenges in process and product integration. Through a case study of Network Solutions Corp. (NSC), a Fortune 500 company that has acquired more than 175 business units, we develop four propositions explaining how the benefits of platform core and complement acquisitions are differently contingent......Acquisitions have become essential tools to retain the technological edge in digital industries. This paper analyses the technological integration challenges in such acquisitions. Acquirers in digital industries are typically platform leaders in platform markets. They acquire (a) other platform...... providers to extend the platform core and to derive network effects by consolidating platform user groups, and (b) complement providers to create monopoly positions for the complements and for innovation complementarity. To enable these acquisition benefits, acquirers face technological integration...

  3. On Integrating Computer Technology into Our Curriculum

    Institute of Scientific and Technical Information of China (English)

    Jianhua Bai

    2000-01-01

    @@ 1. Introduction When something new and exciting occurs in technology, some of us foreign language teachers tend to become too excited to notice the limitations of the new technology. It is no exception with the current use of multimedia and intemet technology in our curriculum. It is my belief that,without an adequate understanding of its limitations as well as its advantages, we may find ourselves disappointed as we move ahead in integrating the multimedia technology into our instruction in a meaningful way. Therefore, in this paper, I would like to start with the discussion of the limitation of multimedia technology and then discuss how we can make use of this new technology to improve our teaching and learning of Chinese as a foreign language.

  4. Developing Metrics in Systems Integration (ISS Program COTS Integration Model)

    Science.gov (United States)

    Lueders, Kathryn

    2007-01-01

    This viewgraph presentation reviews some of the complications in developing metrics for systems integration. Specifically it reviews a case study of how two programs within NASA try to develop and measure performance while meeting the encompassing organizational goals.

  5. Building Technologies Program Multi-Year Program Plan Program Portfolio Management 2008

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2008-01-01

    Building Technologies Program Multi-Year Program Plan 2008 for program portfolio management, including the program portfolio management process, program analysis, performance assessment, stakeholder interactions, and cross-cutting issues.

  6. Strategic Technology Investment Analysis: An Integrated System Approach

    Science.gov (United States)

    Adumitroaie, V.; Weisbin, C. R.

    2010-01-01

    Complex technology investment decisions within NASA are increasingly difficult to make such that the end results are satisfying the technical objectives and all the organizational constraints. Due to a restricted science budget environment and numerous required technology developments, the investment decisions need to take into account not only the functional impact on the program goals, but also development uncertainties and cost variations along with maintaining a healthy workforce. This paper describes an approach for optimizing and qualifying technology investment portfolios from the perspective of an integrated system model. The methodology encompasses multi-attribute decision theory elements and sensitivity analysis. The evaluation of the degree of robustness of the recommended portfolio provides the decision-maker with an array of viable selection alternatives, which take into account input uncertainties and possibly satisfy nontechnical constraints. The methodology is presented in the context of assessing capability development portfolios for NASA technology programs.

  7. Strategic Technology Investment Analysis: An Integrated System Approach

    Science.gov (United States)

    Adumitroaie, V.; Weisbin, C. R.

    2010-01-01

    Complex technology investment decisions within NASA are increasingly difficult to make such that the end results are satisfying the technical objectives and all the organizational constraints. Due to a restricted science budget environment and numerous required technology developments, the investment decisions need to take into account not only the functional impact on the program goals, but also development uncertainties and cost variations along with maintaining a healthy workforce. This paper describes an approach for optimizing and qualifying technology investment portfolios from the perspective of an integrated system model. The methodology encompasses multi-attribute decision theory elements and sensitivity analysis. The evaluation of the degree of robustness of the recommended portfolio provides the decision-maker with an array of viable selection alternatives, which take into account input uncertainties and possibly satisfy nontechnical constraints. The methodology is presented in the context of assessing capability development portfolios for NASA technology programs.

  8. Innovative Technology Development Program. Final summary report

    Energy Technology Data Exchange (ETDEWEB)

    Beller, J.

    1995-08-01

    Through the Office of Technology Development (OTD), the U.S. Department of Energy (DOE) has initiated a national applied research, development, demonstration, testing, and evaluation program, whose goal has been to resolve the major technical issues and rapidly advance technologies for environmental restoration and waste management. The Innovative Technology Development (ITD) Program was established as a part of the DOE, Research, Development, Demonstration, Testing, and Evaluation (RDDT&E) Program. The plan is part of the DOE`s program to restore sites impacted by weapons production and to upgrade future waste management operations. On July 10, 1990, DOE issued a Program Research and Development Announcement (PRDA) through the Idaho Operations Office to solicit private sector help in developing innovative technologies to support DOE`s clean-up goals. This report presents summaries of each of the seven projects, which developed and tested the technologies proposed by the seven private contractors selected through the PRDA process.

  9. CICT Computing, Information, and Communications Technology Program

    Science.gov (United States)

    Laufenberg, Lawrence; Tu, Eugene (Technical Monitor)

    2002-01-01

    The CICT Program is part of the NASA Aerospace Technology Enterprise's fundamental technology thrust to develop tools. processes, and technologies that enable new aerospace system capabilities and missions. The CICT Program's four key objectives are: Provide seamless access to NASA resources- including ground-, air-, and space-based distributed information technology resources-so that NASA scientists and engineers can more easily control missions, make new scientific discoveries, and design the next-generation space vehicles, provide high-data delivery from these assets directly to users for missions, develop goal-oriented human-centered systems, and research, develop and evaluate revolutionary technology.

  10. 76 FR 70970 - Technology Innovation Program Advisory Board

    Science.gov (United States)

    2011-11-16

    ... National Institute of Standards and Technology Technology Innovation Program Advisory Board AGENCY.... SUMMARY: The Technology Innovation Program (TIP) Advisory Board will hold a meeting via teleconference on... Innovation Program Acting Deputy Director, National Institute of Standards and Technology, 100 Bureau...

  11. 76 FR 22673 - Technology Innovation Program Advisory Board

    Science.gov (United States)

    2011-04-22

    ... National Institute of Standards and Technology Technology Innovation Program Advisory Board AGENCY... notice in the Federal Register announcing an open meeting for the Technology Innovation Program Advisory... rene.cesaro@nist.gov . SUPPLEMENTARY INFORMATION: The Technology Innovation Program (TIP)...

  12. Integration of Smart Grid Technologies in Households

    DEFF Research Database (Denmark)

    Friis, Freja; Gram-Hanssen, Kirsten

    2013-01-01

    This article considers the interplay between new smart grid technologies and households everyday practices. The research focuses on how Electric Vehicles (EVs) and Dynamic Pricing influence on Danish households’ everyday life and how these technologies constitutes and change routines and practices......, is analysed from the analytical concept offered by the Social Practice Theory. Overall, the case-study demonstrates that the smart grid technologies influence the ‘way of driving’ and changed the temporal patterns of consumption in the families during the test-period. The inquiry attempts to contribute...... to a more complex and multiple consideration of the interplay between households’ social practices and new smart grid technologies - and thereby helps to fill out the lack of research on the integration of peak-shaving technologies in the end-user design....

  13. Easier Said than Done: Leading Technology Integration

    Science.gov (United States)

    Bleakley, David A.; Mangin, Melinda M.

    2013-01-01

    In this case, Mr. Phuture, a district administrator, attempts to lead a diverse team of educators and community members in an effort to develop a district-wide action plan for the integration of instructional technology in K-12 classrooms. Along the way, Mr. Phuture confronts ambiguities in the superintendent's directives, passionate contradicting…

  14. Technology innovation, human resources and dysfunctional integration

    DEFF Research Database (Denmark)

    Madsen, Arne Stjernholm; Ulhøi, John Parm

    2005-01-01

    (Internet technology), which transcends the traditional business of the company in question. It illustrates what goes wrong when innovative human resources do not succeed in becoming integrated into the rest of the host organization and therefore may become trapped by their own passion in a position as self......-righteous missionaries. In closing, implications for research and management are addressed....

  15. Technology innovation, human resources and dysfunctional integration

    DEFF Research Database (Denmark)

    Madsen, Arne Stjernholm; Ulhøi, John Parm

    2005-01-01

    (Internet technology), which transcends the traditional business of the company in question. It illustrates what goes wrong when innovative human resources do not succeed in becoming integrated into the rest of the host organization and therefore may become trapped by their own passion in a position as self...

  16. Developing Pre-service Teachers' Technology Integration ...

    African Journals Online (AJOL)

    Developing Pre-service Teachers' Technology Integration Competencies in Science and Mathematics Teaching: Experiences from Tanzania and Uganda. ... Makerere Journal of Higher Education ... Thus, it emerged that there is a need to explore models situated in a more encompassing theoretical framework like ...

  17. Problems of information technologies integration into humanities

    Directory of Open Access Journals (Sweden)

    Tatiana F. Milova

    2011-05-01

    Full Text Available The author considers main transformations impacted by information technologies in humanitarian researches, discourse and education. Net resources, штащкьфешщт exchange, hypertext and interactive learn means are focused as key integration points.

  18. Clean Coal Technology Demonstration Program: Program update 1993

    Energy Technology Data Exchange (ETDEWEB)

    1994-03-01

    The Clean Coal Technology Demonstration Program (also referred to as the CCT Program) is a $6.9 billion cost-shared industry/government technology development effort. The program is to demonstrate a new generation of advanced coal-based technologies, with the most promising technologies being moved into the domestic and international marketplace. Technology has a vital role in ensuring that coal can continue to serve U.S. energy interests and enhance opportunities for economic growth and employment while meeting the national committment to a clean and healthy global environment. These technologies are being advanced through the CCT Program. The CCT Program supports three substantive national objectives: ensuring a sustainable environment through technology; enhancing energy efficiency and reliability; providing opportunities for economic growth and employment. The technologies being demonstrated under the CCT Program reduce the emissions of sulfur oxides, nitrogen oxides, greenhouse gases, hazardous air pollutants, solid and liquid wastes, and other emissions resulting from coal use or conversion to other fuel forms. These emissions reductions are achieved with efficiencies greater than or equal to currently available technologies.

  19. INS/CNS/GNSS integrated navigation technology

    CERN Document Server

    Quan, Wei; Gong, Xiaolin; Fang, Jiancheng

    2015-01-01

    This book not only introduces the principles of INS, CNS and GNSS, the related filters and semi-physical simulation, but also systematically discusses the key technologies needed for integrated navigations of INS/GNSS, INS/CNS, and INS/CNS/GNSS, respectively. INS/CNS/GNSS integrated navigation technology has established itself as an effective tool for precise positioning navigation, which can make full use of the complementary characteristics of different navigation sub-systems and greatly improve the accuracy and reliability of the integrated navigation system. The book offers a valuable reference guide for graduate students, engineers and researchers in the fields of navigation and its control. Dr. Wei Quan, Dr. Jianli Li, Dr. Xiaolin Gong and Dr. Jiancheng Fang are all researchers at the Beijing University of Aeronautics and Astronautics.

  20. Sources of capabilities, integration and technology commercialization

    DEFF Research Database (Denmark)

    Zahra, Shaker A.; Nielsen, Anders

    2002-01-01

    of internal and external sources on multiple dimensions of successful technology commercialization (TC). The study also explores the moderating role of formal vs. informal integration mechanisms on these relationships. Applying a longitudinal design and data from 119 companies, the results show that internal...... human and technology-based manufacturing sources are positively associated with successful TC. Formal and informal integration mechanisms also significantly moderate the relationships observed between capability sources and TC. Copyright (C) 2002 John Wiley Sons, Ltd.......In recent years, companies have increased their use of internal and external sources in pursuit of a competitive advantage through the effective and timely commercialization of new technology. Grounded in the resource-based view of the firm, this study examines the effect of a company's use...

  1. 76 FR 18166 - Technology Innovation Program Advisory Board

    Science.gov (United States)

    2011-04-01

    ... National Institute of Standards and Technology Technology Innovation Program Advisory Board AGENCY.... SUMMARY: The Technology Innovation Program Advisory Board, National Institute of Standards and Technology.... Cesaro's e-mail address is rene.cesaro@nist.gov . SUPPLEMENTARY INFORMATION: The Technology...

  2. State Program Integrity Review Reports List

    Data.gov (United States)

    U.S. Department of Health & Human Services — Comprehensive state program integrity (PI) review reports (and respective follow-up review reports) provide CMS assessment of the effectiveness of the states PI...

  3. Material Protection, Accounting, and Control Technologies (MPACT) Advanced Integration Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Miller, Mike [Idaho National Lab. (INL), Idaho Falls, ID (United States); Cipiti, Ben [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Demuth, Scott Francis [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Durkee, Jr., Joe W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Fallgren, Andrew James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Jarman, Ken [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Li, Shelly [Idaho National Lab. (INL), Idaho Falls, ID (United States); Meier, Dave [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Osburn, Laura Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Pereira, Candido [Argonne National Lab. (ANL), Argonne, IL (United States); Dasari, Venkateswara Rao [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Ticknor, Lawrence O. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Yoo, Tae-Sic [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2017-01-30

    The development of sustainable advanced nuclear fuel cycles is a long-term goal of the Office of Nuclear Energy’s (DOE-NE) Fuel Cycle Technologies program. The Material Protection, Accounting, and Control Technologies (MPACT) campaign is supporting research and development (R&D) of advanced instrumentation, analysis tools, and integration methodologies to meet this goal (Miller, 2015). This advanced R&D is intended to facilitate safeguards and security by design of fuel cycle facilities. The lab-scale demonstration of a virtual facility, distributed test bed, that connects the individual tools being developed at National Laboratories and university research establishments, is a key program milestone for 2020. These tools will consist of instrumentation and devices as well as computer software for modeling, simulation and integration.

  4. Material Protection, Accounting, and Control Technologies (MPACT) Advanced Integration Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Durkee, Joe W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Cipiti, Ben [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Demuth, Scott Francis [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Fallgren, Andrew James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Jarman, Ken [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Li, Shelly [Argonne National Lab. (ANL), Argonne, IL (United States); Meier, Dave [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Miller, Mike [Argonne National Lab. (ANL), Argonne, IL (United States); Osburn, Laura Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Pereira, Candido [Argonne National Lab. (ANL), Argonne, IL (United States); Dasari, Venkateswara Rao [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Ticknor, Lawrence O. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Yoo, Tae-Sic [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-09-30

    The development of sustainable advanced nuclear fuel cycles is a long-term goal of the Office of Nuclear Energy’s (DOE-NE) Fuel Cycle Technologies program. The Material Protection, Accounting, and Control Technologies (MPACT) campaign is supporting research and development (R&D) of advanced instrumentation, analysis tools, and integration methodologies to meet this goal (Miller, 2015). This advanced R&D is intended to facilitate safeguards and security by design of fuel cycle facilities. The lab-scale demonstration of a virtual facility, distributed test bed, that connects the individual tools being developed at National Laboratories and university research establishments, is a key program milestone for 2020. These tools will consist of instrumentation and devices as well as computer software for modeling, simulation and integration.

  5. Development of system integration technology for integral reactor

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Moon Hee; Kang, D. J.; Kim, K. K. and others

    1999-03-01

    The objective of this report is to integrate the conceptual design of an integral reactor, SMART producing thermal energy of 330 MW, which will be utilized to supply energy for seawater desalination and small-scale power generation. This project also aims to develop system integration technology for effective design of the reactor. For the conceptual design of SMART, preliminary design requirements including the top-tier requirements and design bases were evaluated and established. Furthermore, in the view of the application of codes and standards to the SMART design, existing laws, codes and standards were analyzed and evaluated with respect to its applicability. As a part of this evaluation, directions and guidelines were proposed for the development of new codes and standards which shall be applied to the SMART design. Regarding the integration of SMART conceptual designs, major design activities and interfaces between design departments were established and coordinated through the design process. For the effective management of all design schedules, a work performance evaluation system was developed and applied to the design process. As the results of this activity, an integrated output of SMART designs was produced. Two additional scopes performed in this project include the preliminary economic analysis on the SMART utilization for seawater desalination, and the planning of verification tests for technology implemented into SMART and establishing development plan of the computer codes to be used for SMART design in the next phase. The technical cooperation with foreign country and international organization for securing technologies for integral reactor design and its application was coordinated and managed through this project. (author)

  6. 78 FR 57798 - Program Integrity Issues

    Science.gov (United States)

    2013-09-20

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF EDUCATION 34 CFR Part 668 RIN 1840-AD02 Program Integrity Issues AGENCY: Office of Postsecondary Education... Department of Education published in the Federal Register final regulations for improving integrity in the...

  7. Key technologies for the novel distributed numerical control integrated system

    Institute of Scientific and Technical Information of China (English)

    TAO Guibao; LlU Fei; WANG Shilong

    2004-01-01

    A novel distributed numerical control (DNC) integrated system based on plug-in software technology is proposed. It connects new or old numerical control (NC) machine tools which haveinhomogeneous numerical control systems with CAD/CAM system by CANbus network. A DNC computer is able to control 15 sets of NC machine tools reliably at the same time. The novel DNC system increases the efficiency of machine tools and improve the production management level by realizing non-paper production, agile manufacturing, networked manufacturing and so on in the near future. Key technologies to construct the novel DNC integrated system include the integration of inhomogeneous numerical control systems, NC program restart, and algorithm for communication competition. Such system has demonstrated successful applications in some corporations that have acquired good economic benefits and social effects.

  8. Active Participation of Integrated Development Environments in the Teaching of Object-Oriented Programming

    Science.gov (United States)

    Depradine, Colin; Gay, Glenda

    2004-01-01

    With the strong link between programming and the underlying technology, the incorporation of computer technology into the teaching of a programming language course should be a natural progression. However, the abstract nature of programming can make such integration a difficult prospect to achieve. As a result, the main development tool, the…

  9. Building Technologies Program Multi-Year Program Plan Program Overview 2008

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2008-01-01

    Building Technologies Program Multi-Year Program Plan Program Overview 2008, including market overview and federal role, program vision, mission, design and structure, and goals and multi-year targets.

  10. Integration of GMR Sensors with Different Technologies.

    Science.gov (United States)

    Cubells-Beltrán, María-Dolores; Reig, Càndid; Madrenas, Jordi; De Marcellis, Andrea; Santos, Joana; Cardoso, Susana; Freitas, Paulo P

    2016-06-22

    Less than thirty years after the giant magnetoresistance (GMR) effect was described, GMR sensors are the preferred choice in many applications demanding the measurement of low magnetic fields in small volumes. This rapid deployment from theoretical basis to market and state-of-the-art applications can be explained by the combination of excellent inherent properties with the feasibility of fabrication, allowing the real integration with many other standard technologies. In this paper, we present a review focusing on how this capability of integration has allowed the improvement of the inherent capabilities and, therefore, the range of application of GMR sensors. After briefly describing the phenomenological basis, we deal on the benefits of low temperature deposition techniques regarding the integration of GMR sensors with flexible (plastic) substrates and pre-processed CMOS chips. In this way, the limit of detection can be improved by means of bettering the sensitivity or reducing the noise. We also report on novel fields of application of GMR sensors by the recapitulation of a number of cases of success of their integration with different heterogeneous complementary elements. We finally describe three fully functional systems, two of them in the bio-technology world, as the proof of how the integrability has been instrumental in the meteoric development of GMR sensors and their applications.

  11. Integration of GMR Sensors with Different Technologies

    Directory of Open Access Journals (Sweden)

    María-Dolores Cubells-Beltrán

    2016-06-01

    Full Text Available Less than thirty years after the giant magnetoresistance (GMR effect was described, GMR sensors are the preferred choice in many applications demanding the measurement of low magnetic fields in small volumes. This rapid deployment from theoretical basis to market and state-of-the-art applications can be explained by the combination of excellent inherent properties with the feasibility of fabrication, allowing the real integration with many other standard technologies. In this paper, we present a review focusing on how this capability of integration has allowed the improvement of the inherent capabilities and, therefore, the range of application of GMR sensors. After briefly describing the phenomenological basis, we deal on the benefits of low temperature deposition techniques regarding the integration of GMR sensors with flexible (plastic substrates and pre-processed CMOS chips. In this way, the limit of detection can be improved by means of bettering the sensitivity or reducing the noise. We also report on novel fields of application of GMR sensors by the recapitulation of a number of cases of success of their integration with different heterogeneous complementary elements. We finally describe three fully functional systems, two of them in the bio-technology world, as the proof of how the integrability has been instrumental in the meteoric development of GMR sensors and their applications.

  12. Geothermal Technologies Program 2011 Peer Review Report

    Energy Technology Data Exchange (ETDEWEB)

    Hollett, Douglas [Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States); Stillman, Greg [Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States)

    2011-06-01

    On June 6-10, 2011, the U.S. Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Geothermal Technologies Program (GTP or the Program) conducted its annual program peer review in Bethesda, Maryland. In accordance with the EERE Peer Review Guide, the review provides an independent, expert evaluation of the strategic goals and direction of the program and is a forum for feedback and recommendations on future program planning. The purpose of the review was to evaluate DOE-funded projects for their contribution to the mission and goals of the Program and to assess progress made against stated objectives.

  13. Impact of active controls technology on structural integrity

    Science.gov (United States)

    Noll, Thomas; Austin, Edward; Donley, Shawn; Graham, George; Harris, Terry

    1991-01-01

    This paper summarizes the findings of The Technical Cooperation Program to assess the impact of active controls technology on the structural integrity of aeronautical vehicles and to evaluate the present state-of-the-art for predicting the loads caused by a flight-control system modification and the resulting change in the fatigue life of the flight vehicle. The potential for active controls to adversely affect structural integrity is described, and load predictions obtained using two state-of-the-art analytical methods are given.

  14. Integrating Advanced Molecular Technologies into Public Health.

    Science.gov (United States)

    Gwinn, Marta; MacCannell, Duncan R; Khabbaz, Rima F

    2017-03-01

    Advances in laboratory and information technologies are transforming public health microbiology. High-throughput genome sequencing and bioinformatics are enhancing our ability to investigate and control outbreaks, detect emerging infectious diseases, develop vaccines, and combat antimicrobial resistance, all with increased accuracy, timeliness, and efficiency. The Advanced Molecular Detection (AMD) initiative has allowed the Centers for Disease Control and Prevention (CDC) to provide leadership and coordination in integrating new technologies into routine practice throughout the U.S. public health laboratory system. Collaboration and partnerships are the key to navigating this transition and to leveraging the next generation of methods and tools most effectively for public health.

  15. Offshore platform integration and floatover technology

    CERN Document Server

    Liu, Gengshen

    2017-01-01

    This book discusses offshore platform integration technology, focusing on the floatover methodology and its applications. It also addresses topics related to safety and cost-effectiveness, as well as ensuring the success of a project through careful planning and established detailed operation procedure/working manuals, which are rarely found in the published literature. Unlike other publications in this area, the book not only includes details of technology development, but also presents real project cases in the discussion to make it more comprehensible. Each topic is illustrated with carefully created sketches to show the complex operation procedures. .

  16. Technology Partnership Program fiscal year 1998 program plan

    Energy Technology Data Exchange (ETDEWEB)

    Ford, R.

    1997-09-15

    The Oak Ridge Y-12 Plant will use the Technology Partnership Program to support the DOE nuclear weapons complex (NWC), particularly at the Oak Ridge Y-12 Plant. This support will be achieved through partnerships with industry that enhance the science and technology base and the core capabilities necessary to meet current and future weapons program mission needs. This program will enhance the Weapons Complex technology base and core capabilities by participating, in diversified portfolios of collaborative projects with industrial. The Y-12 Technology Partnership Program (TPP) closely aligns its program with the goals, objectives, and strategies of the DP Stockpile Stewardship and Management plans and DOE technology transfer policy. The Y-12 Defense Programs Office is the primary customer of the Y-12 TPP, and provides input to program planning and execution. Industry involvement is also an essential component. Programs and projects within the Y-12 TPP are responsive to identified weapons complex mission needs. In FY98 the Y-12 TPP will execute the plan devised during FY97 which emphasized the program`s increasing focus on providing benefits to DP. This plan called for the soft-landing of four terminated projects early in FY97 and the normal conclusion of four others at various times throughout the year. Successful conclusion of these projects enabled a call for new TPP projects in FY98 with clearer Defense Program benefits. The Defense Programs benefits were assured by the participation of Y-12`s Weapon Advisory Council, which met to determine proposal guidelines and criteria. The Weapons Advisory Council later met to rank each proposal against the established guidelines assuring those proposals with the best DP benefits would be chosen. The goal for the Y-12 TPP program will be to successfully implement the winning proposals in the first quarter of FY98 and maintain administrative and fiscal control over these and continuing projects.

  17. Technology Partnership Program fiscal year 1998 program plan

    Energy Technology Data Exchange (ETDEWEB)

    Ford, R.

    1997-09-15

    The Oak Ridge Y-12 Plant will use the Technology Partnership Program to support the DOE nuclear weapons complex (NWC), particularly at the Oak Ridge Y-12 Plant. This support will be achieved through partnerships with industry that enhance the science and technology base and the core capabilities necessary to meet current and future weapons program mission needs. This program will enhance the Weapons Complex technology base and core capabilities by participating, in diversified portfolios of collaborative projects with industrial. The Y-12 Technology Partnership Program (TPP) closely aligns its program with the goals, objectives, and strategies of the DP Stockpile Stewardship and Management plans and DOE technology transfer policy. The Y-12 Defense Programs Office is the primary customer of the Y-12 TPP, and provides input to program planning and execution. Industry involvement is also an essential component. Programs and projects within the Y-12 TPP are responsive to identified weapons complex mission needs. In FY98 the Y-12 TPP will execute the plan devised during FY97 which emphasized the program`s increasing focus on providing benefits to DP. This plan called for the soft-landing of four terminated projects early in FY97 and the normal conclusion of four others at various times throughout the year. Successful conclusion of these projects enabled a call for new TPP projects in FY98 with clearer Defense Program benefits. The Defense Programs benefits were assured by the participation of Y-12`s Weapon Advisory Council, which met to determine proposal guidelines and criteria. The Weapons Advisory Council later met to rank each proposal against the established guidelines assuring those proposals with the best DP benefits would be chosen. The goal for the Y-12 TPP program will be to successfully implement the winning proposals in the first quarter of FY98 and maintain administrative and fiscal control over these and continuing projects.

  18. Computer Programming Projects in Technology Courses.

    Science.gov (United States)

    Thomas, Charles R.

    1985-01-01

    Discusses programming projects in applied technology courses, examining documentation, formal reports, and implementation. Includes recommendations based on experience with a sophomore machine elements course which provided computers for problem solving exercises. (DH)

  19. Environmental Technology Verification Program (ETV) Policy Compendium

    Science.gov (United States)

    The Policy Compendium summarizes operational decisions made to date by participants in the U.S. Environmental Protection Agency's (EPA's) Environmental Technology Verification Program (ETV) to encourage consistency among the ETV centers. The policies contained herein evolved fro...

  20. A Program Office Guide to Technology Transfer

    Science.gov (United States)

    1988-11-01

    maintenance is emphasized, interchan- tions. Second source component verification geability requirements are pushed lower to the activities often are...technology tiansfer risk, the program office considers the following: 10.7 THE TECNOLOGY TRANSFERPLAN * Schedule intensity and concurrency The

  1. Appendix J - GPRA06 vehicle technologies program

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2009-01-18

    The target market for the Office of FreedomCAR and Vehicle Technologies (FCVT) program include light vehicles (cars and light trucks) and heavy vehicles (trucks more than 10,000 pounds Gross Vehicle Weight).

  2. Aeronautics Research Mission Directorate Integrated Systems Research Program (ISRP) and UAS Integration in the NAS Project

    Science.gov (United States)

    Wolfe, Jean

    2010-01-01

    Program Goal: Conduct research at an integrated system-level on promising concepts and technologies and explore, assess, or demonstrate the benefits in a relevant environment.Criteria for selection of projects for Integrated Systems Research: a) Technology has attained enough maturity in the foundational research program that they merit more in-depth evaluation at an integrated system level in a relevant environment. b) Technologies which systems analysis indicates have the most potential for contributing to the simultaneous attainment of goals. c) Technologies identified through stakeholder input as having potential for simultaneous attainment of goals. d) Research not being done by other government agencies and appropriate for NASA to conduct. e) Budget augmentation. Environmentally Responsible Aviation (ERA) Project Explore and assess new vehicle concepts and enabling technologies through system-level experimentation to simultaneously reduce fuel burn, noise, and emissions Unmanned Aircraft Systems (UAS) Integration in the National Airspace System (NAS) Project Contribute capabilities that reduce technical barriers related to the safety and operational challenges associated with enabling routine UAS access to the NAS Innovative Concepts for Green Aviation (ICGA) Project Spur innovation by offering research opportunities to the broader aeronautics community through peer-reviewed proposals, with a focus on making aviation more eco-friendly. Establish incentive prizes similar to the Centennial Challenges and sponsor innovation demonstrations of selected technologies that show promise of reducing aviation s impact on the environment

  3. The Military Critical Technologies Program's Space Systems Technologies

    Science.gov (United States)

    Wick, R.

    The major objectives of the Militarily Critical Technologies Program (MCTP) are to identify and characterize technologies by specific parameters including quantitative values and to assess worldwide technology capabilities. The MCTP program, which is sponsored by the office of the Deputy Under Secretary/ITS vice Under Secretary, develops the Militarily Critical Technologies List (MCTL) though the support of the Institute for Defense Analyses. This paper describes the MCTL and its Space Systems Technologies. It outlines the unique TWG process developed by the Institute for Defense Analyses (IDA) to support the MCTP. It also outlines the approach used to determine which technologies are included as well as how worldwide technology capability assessment for each technology is determined. Each TWG has a broad membership that includes representatives from government, industry and academia who are subject matter experts in their respective fields. Therefore, the TWG process provides a systematic, ongoing assessment and analysis of goods and technologies to determine technologies that are being developed worldwide that significantly enhance or degrade military capabilities.

  4. CALL Teacher Education as an Impetus for L2 Teachers in Integrating Technology

    Science.gov (United States)

    Hong, Kwang Hee

    2010-01-01

    The ultimate goal of CALL teacher education is to enable L2 teachers to integrate CALL technology into their classroom with confidence and knowledge. As a way to achieve this goal, an increasing number of studies have paid attention to the integration of CALL technology into the teacher education program and into the classroom. Nonetheless, there…

  5. Integrated Engineering Information Technology, FY93 accommplishments

    Energy Technology Data Exchange (ETDEWEB)

    Harris, R.N.; Miller, D.K.; Neugebauer, G.L.; Orona, J.R.; Partridge, R.A.; Herman, J.D.

    1994-03-01

    The Integrated Engineering Information Technology (IEIT) project is providing a comprehensive, easy-to-use computer network solution or communicating with coworkers both inside and outside Sandia National Laboratories. IEIT capabilities include computer networking, electronic mail, mechanical design, and data management. These network-based tools have one fundamental purpose: to help create a concurrent engineering environment that will enable Sandia organizations to excel in today`s increasingly competitive business environment.

  6. Integrated collaborative building design using Internet technology

    OpenAIRE

    Roshani, D.M.R.

    2005-01-01

    Communication between the parties in a project of an integrated collaborative engineering system has been the subject of active research for many years. The construction industry has a long tradition of collaborative working between the members of the construction team. At the design stage, this has traditionally been based on physical meetings between representatives of the principal design team members. To aid these meetings, the information and communication technologies that are currently...

  7. ECITE: A Testbed for Assessment of Technology Interoperability and Integration wiht Architecture Components

    Science.gov (United States)

    Graves, S. J.; Keiser, K.; Law, E.; Yang, C. P.; Djorgovski, S. G.

    2016-12-01

    ECITE (EarthCube Integration and Testing Environment) is providing both cloud-based computational testing resources and an Assessment Framework for Technology Interoperability and Integration. NSF's EarthCube program is funding the development of cyberinfrastructure building block components as technologies to address Earth science research problems. These EarthCube building blocks need to support integration and interoperability objectives to work towards a coherent cyberinfrastructure architecture for the program. ECITE is being developed to provide capabilities to test and assess the interoperability and integration across funded EarthCube technology projects. EarthCube defined criteria for interoperability and integration are applied to use cases coordinating science problems with technology solutions. The Assessment Framework facilitates planning, execution and documentation of the technology assessments for review by the EarthCube community. This presentation will describe the components of ECITE and examine the methodology of cross walking between science and technology use cases.

  8. Effective Technology Integration Shows New Frontiers in Education

    Science.gov (United States)

    Paoletti, Franco; Carlucci, Lisa Marie

    2007-11-01

    In this ever-changing world, technology is affecting how people view learning and the overall educational process. For an educator, the successful implementation of technology can be one of the most effective tools in the classroom. The introduction of virtual simulations of real life situations into what was once considered a teacher-centered classroom, allows the educator to meet the complex differentiated needs of a multi-faced student population. In this modified classroom, the focus naturally shifts on the students and their interaction with the rest of the class and beyond. Effective integration of technology literally opens a window onto the outside world providing students with increased motivation and with the necessary expertise to enter the workforce or successfully pursue higher education. This work analyzes the impact of technology, the methodologies currently in use, advantages and disadvantages, providing examples on how to successfully implement effective programs under budgetary constraints.

  9. The Clean Coal Technology Program: Lessons learned

    Energy Technology Data Exchange (ETDEWEB)

    1994-07-01

    The Clean Coal Technology (CCT) Program is a unique partnership between the federal government and industry that has as its primary goal the successful introduction of new clean coal utilization technologies into the energy marketplace. Clean coal technologies being demonstrated under the CCT Program are establishing a technology base that will enable the nation to meet more stringent energy and environmental goals. Most of the, demonstrations are being conducted at commercial scale, in actual user environments, and under circumstances typical of commercial operations. These features allow the potential of the technologies to be evaluated in their intended commercial applications. Each application addresses one of the following four market sectors: advanced electric power generation; environmental control devices; coal processing for clean fuels; and industrial applications. The purpose of this report is fourfold: Explain the CCT program as a model for successful joint government industry partnership for selecting and demonstrating technologies that have promise for adaptation to the energy marketplace; set forth the process by which the process has been implemented and the changes that have been made to improve that process; outline efforts employed to inform potential users and other interested parties about the technologies being developed; and examine some of the questions which must be considered in determining if the CCT Program model can be applied to other programs.

  10. Semiconductor technology program: Progress briefs

    Science.gov (United States)

    Galloway, K. F.; Scace, R. I.; Walters, E. J.

    1981-01-01

    Measurement technology for semiconductor materials, process control, and devices, is discussed. Silicon and silicon based devices are emphasized. Highlighted activities include semiinsulating GaAs characterization, an automatic scanning spectroscopic ellipsometer, linewidth measurement and coherence, bandgap narrowing effects in silicon, the evaluation of electrical linewidth uniformity, and arsenicomplanted profiles in silicon.

  11. 75 FR 10464 - Broadband Technology Opportunities Program

    Science.gov (United States)

    2010-03-08

    ... National Telecommunications and Information Administration RIN 0660-ZA28 Broadband Technology Opportunities... Technology Opportunities Program (BTOP) is extended until 5:00 p.m. Eastern Daylight Time (EDT) on March 26... Sustainable Broadband Adoption (SBA) projects. DATES: All applications for funding CCI projects must...

  12. Mine Waste Technology Program Electrochemical Tailings Cover

    Science.gov (United States)

    This report summarizes the results of Mine Waste Technology Program (MWTP) Activity III, Project 40, Electrochemical Tailings Cover, funded by the U.S. Environmental Protection Agency (EPA) and jointly administered by EPA and the U.S. Department of Energy (DOE). MSE Technology A...

  13. The Changing Nature of Educational Technology Programs

    Science.gov (United States)

    Spector, J. Michael

    2015-01-01

    The many changes in educational technologies have been well documented in both the professional and popular literature. What is less well documented is the changing nature of programs that prepare individuals for careers in the broad multi-disciplinary field of educational technology. This article is a first attempt to look at how educational…

  14. Solar Energy Technologies Program Newsletter - July 2009

    Energy Technology Data Exchange (ETDEWEB)

    None

    2009-07-01

    This quarterly newsletter is intended for participants and stakeholders in the DOE Solar Program. The content includes features on technology development, market transformation, and policy analysis for solar. Highlights include solar industry updates, DOE funding opportunity announcements and awards, and national laboratory technology developments.

  15. Characterization monitoring & sensor technology crosscutting program

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-08-01

    The purpose of the Characterization, Monitoring, and Sensor Technology Crosscutting Program (CMST-CP) is to deliver appropriate characterization, monitoring, and sensor technology (CMST) to the OFfice of Waste Management (EM-30), the Office of Environmental Restoration (EM-40), and the Office of Facility Transition and Management (EM-60).

  16. Solar Energy Technologies Program Newsletter - September 2009

    Energy Technology Data Exchange (ETDEWEB)

    None

    2009-10-01

    This quarterly newsletter is intended for participants and stakeholders in the DOE Solar Program. The content includes features on technology development, market transformation, and policy analysis for solar. Highlights include solar industry updates, DOE funding opportunity announcements and awards, and national laboratory technology developments.

  17. Mine Waste Technology Program Electrochemical Tailings Cover

    Science.gov (United States)

    This report summarizes the results of Mine Waste Technology Program (MWTP) Activity III, Project 40, Electrochemical Tailings Cover, funded by the U.S. Environmental Protection Agency (EPA) and jointly administered by EPA and the U.S. Department of Energy (DOE). MSE Technology A...

  18. Technology Refresh Program Launches Phase II | Poster

    Science.gov (United States)

    The Technology Refresh Program (TRP) is an NCI-funded initiative designed to promote efficient spending on computer equipment by providing staff members with access to the latest technology to meet their computing needs, said Kyle Miller, IT coordinator, Computer and Statistical Services (C&SS), NCI at Frederick.

  19. Handmade Films: Questioning and Integrating Cinematic Technology

    DEFF Research Database (Denmark)

    Graca, Marina Estela

    2005-01-01

    technological scheme to contingency, thus opening the production process to new unpredictable expressive and communicative possibilities. I will attempt to explain how this corresponds to a renewed way of comprehending technology by, simultaneously, revealing the human reality it contains and physiologically...... (1976/1978), proclaiming the physiological development of a consciousness of movement. Thus neglecting what has always been considered up to now the main ontological foundations of film: the automatic recording of physical reality. At the same time he was questioning the epistemological model...... they integrate, i.e. the perception of order and the ways in which that order is imposed upon reality by films and the technology which holds them. In this paper I will try to demonstrate that, by overwhelming the cinematic technical workings with his gesture –literally with his body– Norman McLaren exposed its...

  20. 75 FR 62369 - Technology Innovation Program Advisory Board

    Science.gov (United States)

    2010-10-08

    ... Innovation Program Advisory Board AGENCY: National Institute of Standards and Technology, Department of Commerce. ACTION: Notice of public meeting. SUMMARY: The Technology Innovation Program Advisory Board... address is rene.cesaro@nist.gov . SUPPLEMENTARY INFORMATION: The Technology Innovation Program...

  1. Feasibility Study of Integrating IDELIX’s Pliable Display Technology into the COPlanS Technology Demonstration Software

    Science.gov (United States)

    2005-03-31

    Feasibility Study of Integrating IDELIX’s Pliable Display Technology into the COPlanS Technology Demonstration Software Issue Number: Version 1... Technology Demonstration Software 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f...Collaborative Operations Planning System (COPlanS) technology demonstration software in the areas of collaboration and data visualization using IDELIX’s Pliable

  2. Technology for Online Portfolio Assessment Programs

    Science.gov (United States)

    Ferrara, Victoria M.

    2010-01-01

    Portfolio assessment is a valid and reliable method to assess experiential learning. Developing a fully online portfolio assessment program is neither easy nor inexpensive. The institution seeking to take its portfolio assessment program online must make a commitment to its students by offering the technologies most suited to meet students' needs.…

  3. Commercial Refrigeration Technology. Florida Vocational Program Guide.

    Science.gov (United States)

    University of South Florida, Tampa. Dept. of Adult and Vocational Education.

    The program guide for commercial refrigeration technology courses in Florida identifies primary considerations for the organization, operation, and evaluation of a vocational education program. Following an occupational description for the job title for refrigeration mechanic, and its Dictionary of Occupational Titles code, are six sections…

  4. Telecommunications and Technology Infrastructure Program, 2013

    Science.gov (United States)

    California Community Colleges, Chancellor's Office, 2014

    2014-01-01

    This 16th annual report highlights up-to-date information on the programs supported through the Chancellor's Office Telecommunications and Technology Infrastructure Program (TTIP). To summarize 2012-13, one would describe it as a year of planning and preparation. The system-wide budget cuts of the past few years, reports of impacted classes, staff…

  5. Lighting Computer Programs in Lighting Technology

    OpenAIRE

    Ekren, Nazmi; Dursun, Bahtiyar; Ercan AYKUT

    2008-01-01

    It is well known that the computer in lighting technology is a vital component for lighting designers. Lighting computer programs are preferred in preparing architectural projects in lighting techniques, especially in lighting calculations. Lighting computer programs, which arise with the aim of helping lighting designers, gain more interest day by day. The most important property of lighting computer programs is the ability to enable the simulation of lighting projects without requiring any ...

  6. Integrated program designed for local governments.

    Science.gov (United States)

    1993-01-01

    Local Philippine governments are required under the 1991 Local Government Code to plan and manage their own health and nutrition programs. In response to their requests, the Municipal Integrated Nutrition Program (MINP) is being developed. This program will integrate the local efforts of the following national nutrition programs: the Teacher-Child-Parent Approach of the Department of Education, Culture, and Sports; the Community-Based Planning and Management of Nutrition Programs of the Department of Health; the Early Childhood Enrichment Program of the Department of Social welfare and Development; and the Bio-Intensive Gardening for Home/Community Food Security of the Department of Agriculture. The Nutrition Center of the Philippines (NCP) has assisted in the development, testing, and evaluation of the MINP. In 1993, MINP models will begin in 1 or 2 barangays in Carmen, Cebu; Hilongos, Leyte; and Dapitan City in Zamboanga del Norte. NCP will provide program materials and technical assistance. Modeling activities will include advocating to local government units; designing and installing nutrition planning capability via planning workshops; packaging of program requirements and costs; designing a strategy to mobilize resources; facilitating purchase, delivery, and payment of program requirements; facilitating and coordinating training; designing and installing a monitoring and evaluation system; and documenting and disseminating. Local government officials, technical government agencies, nongovernment organizations, and private entities will work together.

  7. Integrative Medicine Program- MD Anderson Cancer Center

    Directory of Open Access Journals (Sweden)

    Richard T Lee

    2012-06-01

    Full Text Available The Integrative Medicine Program at MD Anderson Cancer Center was first established in 1998.  Our mission is to empower patients with cancer and their families to become active partners in their own physical, psycho-spiritual, and social health through personalized education and evidenced-based clinical care to optimize health, quality of life, and clinical outcomes across the cancer continuum.  The program consists of three main components: clinical care, research, and education.  The Integrative Medicine Center provides clinical services to patients through individual and group programs.  The clinical philosophy of the center is to work collaboratively with the oncology teams to build comprehensive and integrative care plans that are personalized, evidence-based, and safe with the goal of improving clinical outcomes.  The individual services comprise of integrative oncology consultation, acupuncture, meditation, music therapy, nutrition, and oncology massage.  The center also provides a variety of group programs including meditation, yoga, tai chi, cooking classes and others.  Over the past 13 years, over 70,000 patients and families have participated in services and programs offered by the center.  The research portfolio focuses on three main areas: mind-body interventions, acupuncture, and meditation.  This lecture will focus on providing an overview of the Integrative Medicine Program at MD Anderson with a focus on the clinical services provided.  Participants will learn about the integrative clinical model and how this is applied to the care of cancer patients at MD Anderson Cancer Center.  Current and future research topics will be discussed as well as patient cases.

  8. Integrated cooling devices in silicon technology

    Science.gov (United States)

    Perret, C.; Avenas, Y.; Gillot, Ch.; Boussey, J.; Schaeffer, Ch.

    2002-05-01

    Silicon technology has become a good alternative to copper for the elaboration of efficient cooling devices required in power electronics domain. Owing to its high degree of miniaturization, it is expected to provide suitable microchannels and other inlets holes that were not achievable by copper micromachining. Besides, the use of silicon technology provides a variety of bare materials (silicon dioxide, silicon nitride, silicide, etc.) which may be either insulator or conductive, with a good or bad thermal conductivity. This large choice makes it possible to built up rather complex multilayer devices with mechanical properties good enough in comparison with hybrid copper technology heat sinks. Nevertheless, the use of silicon technology, where the microchannel width may reach few tens of microns, raises fundamental features concerning the fluid displacement within such small sections. More precisely, fundamental fluid mechanics studies have to be conducted out in order to get an accurate description of the fluid boundary layers and to provide basic data on the exchange mechanisms occurring at these surfaces. In this paper, we review the operation principles of both single- and double-phase heat exchange devices elaborated in silicon technology. Forced-convection heat sinks as well as integrated micro heat pipes are analyzed. An analytical approach is adopted to evaluate their total thermal resistances as a function of several geometrical parameters. Numerical simulations are then used in order to assess the accuracy of the analytical approach and to evaluate the impact of the fluidic aspects on the whole performance. The optimum devices are then conceived thanks to an appropriate optimization procedure taken into account the several experimental constraints. Reference values of similar copper devices are reminded and the advantages of the silicon integrated approach are highlighted.

  9. Wearable smart systems: from technologies to integrated systems.

    Science.gov (United States)

    Lymberis, A

    2011-01-01

    Wearable technology and integrated systems, so called Smart Wearable Systems (SWS) have demonstrated during the last 10-15 years significant advances in terms of, miniaturisation, seamless integration, data processing & communication, functionalisation and comfort. This is mainly due to the huge progress in sciences and technologies e.g. biomedical and micro & nano technologies, but also to a strong demand for new applications such as continuous personal health monitoring, healthy lifestyle support, human performance monitoring and support of professionals at risk. Development of wearable systems based of smart textile have, in addition, benefited from the eagerness of textile industry to develop new value-added apparel products like functionalized garments and smart clothing. Research and development in these areas has been strongly promoted worldwide. In Europe the major R&D activities were supported through the Information & Communication Technologies (ICT) priority of the R&D EU programs. The paper presents and discusses the main achievements towards integrated systems as well as future challenges to be met in order to reach a market with reliable and high value-added products.

  10. Technology Integration Initiative In Support of Outage Management

    Energy Technology Data Exchange (ETDEWEB)

    Gregory Weatherby; David Gertman

    2012-07-01

    Plant outage management is a high priority concern for the nuclear industry from cost and safety perspectives. Often, command and control during outages is maintained in the outage control center where many of the underlying technologies supporting outage control are the same as those used in the 1980’s. This research reports on the use of advanced integrating software technologies and hand held mobile devices as a means by which to reduce cycle time, improve accuracy, and enhance transparency among outage team members. This paper reports on the first phase of research supported by the DOE Light Water Reactor Sustainability (LWRS) Program that is performed in close collaboration with industry to examine the introduction of newly available technology allowing for safe and efficient outage performance. It is thought that this research will result in: improved resource management among various plant stakeholder groups, reduced paper work, and enhanced overall situation awareness for the outage control center management team. A description of field data collection methods, including personnel interview data, success factors, end-user evaluation and integration of hand held devices in achieving an integrated design are also evaluated. Finally, the necessity of obtaining operations cooperation support in field studies and technology evaluation is acknowledged.

  11. Standard cost elements for technology programs

    Science.gov (United States)

    Christensen, Carisa B.; Wagenfuehrer, Carl

    1992-01-01

    The suitable structure for an effective and accurate cost estimate for general purposes is discussed in the context of a NASA technology program. Cost elements are defined for research, management, and facility-construction portions of technology programs. Attention is given to the mechanisms for insuring the viability of spending programs, and the need for program managers is established for effecting timely fund disbursement. Formal, structures, and intuitive techniques are discussed for cost-estimate development, and cost-estimate defensibility can be improved with increased documentation. NASA policies for cash management are examined to demonstrate the importance of the ability to obligate funds and the ability to cost contracted funds. The NASA approach to consistent cost justification is set forth with a list of standard cost-element definitions. The cost elements reflect the three primary concerns of cost estimates: the identification of major assumptions, the specification of secondary analytic assumptions, and the status of program factors.

  12. Development of integrity evaluation technology for pressurized components in nuclear power plant and IT based integrity evaluation system

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Jin; Choi, Jae Boong; Shim, Do Jun [Sungkyunkwan Univ., Seoul (Korea, Republic of)] (and others)

    2004-02-15

    The objective of this research is to develop on efficient integrity evaluation technology and to investigate the applicability of the newly-developed technology such as internet-based cyber platform etc. to Nuclear Power Plant(NPP) components. The development of an efficient structural integrity evaluation system is necessary for safe operation of NPP as the increase of operating periods. Moreover, material test data as well as emerging structural integrity assessment technology are also needed for the evaluation of aged components. The following five topics are covered in this project: development of the wall-thinning evaluation program for nuclear piping; development of structural integrity evaluation criteria for steam generator tubes with cracks of various shape; development of fatigue life evaluation system for major components of NPP; ingegration of internet-based cyber platform and integrity evaluation program for primary components of NPP; effects of aging on strength of dissimilar welds.

  13. Teaching Media Integration in Concrete Technology Course

    Directory of Open Access Journals (Sweden)

    René Antonio Puig Martínez

    2015-01-01

    Full Text Available The Concrete Technology subject, part of the curriculum of Civil Engineering, required for your study multiple and varied teaching media, only way to achieve objectivity in the instruction. The work presented here, aims to unite methodologically the teaching media as a system, aimed at improving knowledge acquisition by students as a more for raising the quality of instruction and learning outcomes. By selecting appropriate teaching media to Concrete Technology subject, the author was supported by the main categories of didactic. The key product of the work is presented as a multimedia organized methodologically for conducting classes and independent study in the subject and in the integrated project for third year. The study results have been validated to date in two courses, contributing to increased student motivation for the subject and better outcomes.

  14. Characterization, monitoring, and sensor technology crosscutting program: Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    The purpose of the Characterization, Monitoring, and Sensor Technology Crosscutting Program (CMST-CP) is to deliver appropriate characterization, monitoring, and sensor technology (CMST) to the Office of Waste Management (EM-30), the Office of Environmental Restoration (EM-40), and the Office of Facility Transition and Management (EM-60). The technology development must also be cost effective and appropriate to EM-30/40/60 needs. Furthermore, the required technologies must be delivered and implemented when needed. Accordingly, and to ensure that available DOE and other national resources are focused an the most pressing needs, management of the technology development is concentrated on the following Focus Areas: Contaminant Plume Containment and Remediation (PFA); Landfill Stabilization (LSFA); High-Level Waste Tank Remediation (TFA); Mixed Waste Characterization, Treatment, and Disposal (MWFA); and Facility Deactivation, Decommissioning, and Material Disposition (FDDMDFA). Brief descriptions of CMST-CP projects funded in FY95 are presented.

  15. Integration of basic electromagnetism and engineering technology

    DEFF Research Database (Denmark)

    Bentz, Sigurd

    1995-01-01

    theoretical course contents have been reduced to a core of fundamental principles. These are combined with the study of magnetic properties of materials closely related to manufacturer's data sheets. To enhance the understanding of these fundamentals, practical topics from engineering technology are included....... Components or systems that combine magnetic, electrical and mechanical aspects are preferred. Also, a series of hands-on lab projects give the students an opportunity to learn by doing. The topics that are covered by the course are outlined. By integrating the teaching of basic physical laws...

  16. Intelligent systems technology infrastructure for integrated systems

    Science.gov (United States)

    Lum, Henry

    1991-01-01

    A system infrastructure must be properly designed and integrated from the conceptual development phase to accommodate evolutionary intelligent technologies. Several technology development activities were identified that may have application to rendezvous and capture systems. Optical correlators in conjunction with fuzzy logic control might be used for the identification, tracking, and capture of either cooperative or non-cooperative targets without the intensive computational requirements associated with vision processing. A hybrid digital/analog system was developed and tested with a robotic arm. An aircraft refueling application demonstration is planned within two years. Initially this demonstration will be ground based with a follow-on air based demonstration. System dependability measurement and modeling techniques are being developed for fault management applications. This involves usage of incremental solution/evaluation techniques and modularized systems to facilitate reuse and to take advantage of natural partitions in system models. Though not yet commercially available and currently subject to accuracy limitations, technology is being developed to perform optical matrix operations to enhance computational speed. Optical terrain recognition using camera image sequencing processed with optical correlators is being developed to determine position and velocity in support of lander guidance. The system is planned for testing in conjunction with Dryden Flight Research Facility. Advanced architecture technology is defining open architecture design constraints, test bed concepts (processors, multiple hardware/software and multi-dimensional user support, knowledge/tool sharing infrastructure), and software engineering interface issues.

  17. Tank waste remediation system integrated technology plan. Revision 2

    Energy Technology Data Exchange (ETDEWEB)

    Eaton, B.; Ignatov, A.; Johnson, S.; Mann, M.; Morasch, L.; Ortiz, S.; Novak, P. [eds.] [Pacific Northwest Lab., Richland, WA (United States)

    1995-02-28

    The Hanford Site, located in southeastern Washington State, is operated by the US Department of Energy (DOE) and its contractors. Starting in 1943, Hanford supported fabrication of reactor fuel elements, operation of production reactors, processing of irradiated fuel to separate and extract plutonium and uranium, and preparation of plutonium metal. Processes used to recover plutonium and uranium from irradiated fuel and to recover radionuclides from tank waste, plus miscellaneous sources resulted in the legacy of approximately 227,000 m{sup 3} (60 million gallons) of high-level radioactive waste, currently in storage. This waste is currently stored in 177 large underground storage tanks, 28 of which have two steel walls and are called double-shell tanks (DSTs) an 149 of which are called single-shell tanks (SSTs). Much of the high-heat-emitting nuclides (strontium-90 and cesium-137) has been extracted from the tank waste, converted to solid, and placed in capsules, most of which are stored onsite in water-filled basins. DOE established the Tank Waste Remediation System (TWRS) program in 1991. The TWRS program mission is to store, treat, immobilize and dispose, or prepare for disposal, the Hanford tank waste in an environmentally sound, safe, and cost-effective manner. Technology will need to be developed or improved to meet the TWRS program mission. The Integrated Technology Plan (ITP) is the high-level consensus plan that documents all TWRS technology activities for the life of the program.

  18. Integrated Curriculum Programs in British Columbia

    Science.gov (United States)

    Johnston, Julie

    2011-01-01

    In this article, the author discusses British Columbia's integrated curriculum programs (ICPs). In this province of sea and mountains, outdoor adventures figure prominently in its ICPs--with a healthy dose of environmental and sustainability education mixed in. The author presents five examples from British Columbia's ICPs: (1) Earthquest Outdoor…

  19. 75 FR 63763 - Program Integrity: Gainful Employment

    Science.gov (United States)

    2010-10-18

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF EDUCATION 34 CFR Part 668 RIN 1840-AD04 Program Integrity: Gainful Employment AGENCY: Office of Postsecondary Education, Department of Education. ACTION: Notice of public meeting sessions. SUMMARY: The Secretary...

  20. A comparison of teaching strategies for integrating information technology into clinical nursing education.

    Science.gov (United States)

    Elfrink, V L; Davis, L S; Fitzwater, E; Castleman, J; Burley, J; Gorney-Moreno, M J; Sullivan, J; Nichols, B; Hall, D; Queen, K; Johnson, S; Martin, A

    2000-01-01

    As health care becomes more information-intensive and diverse, there is a need to integrate information technology (IT) into clinical education. Little is known, however, about how to design instructional strategies for integrating information technology into clinical nursing education. This article outlines the instructional strategies used by faculty in five nursing programs who taught students to use a point-of-care information technology system. The article also reports students' computer acceptance and summarizes IT clinical teaching recommendations.

  1. Authentic Learning Exercises as a Means to Influence Preservice Teachers' Technology Integration Self-Efficacy and Intentions to Integrate Technology

    Science.gov (United States)

    Banas, Jennifer R.; York, Cindy S.

    2014-01-01

    This study explored the impact of authentic learning exercises, as an instructional strategy, on preservice teachers' technology integration self-efficacy and intentions to integrate technology. Also explored was the predictive relationship between change in preservice teachers' technology integration self-efficacy and change in intentions to…

  2. Clean coal technology demonstration program: Program update 1996-97

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-10-01

    The Clean Coal Technology Demonstration Program (known as the CCT Program) reached a significant milestone in 1996 with the completion of 20 of the 39 active projects. The CCT Program is responding to a need to demonstrate and deploy a portfolio of technologies that will assure the U.S. recoverable coal reserves of 297 billion tons could continue to supply the nation`s energy needs economically and in a manner that meets the nation`s environmental objectives. This portfolio of technologies includes environmental control devices that contributed to meeting the accords on transboundary air pollution recommended by the Special Envoys on Acid Rain in 1986. Operational, technical, environmental, and economic performance information and data are now flowing from highly efficient, low-emission, advanced power generation technologies that will enable coal to retain its prominent role into the next millennium. Further, advanced technologies are emerging that will enhance the competitive use of coal in the industrial sector, such as in steelmaking. Coal processing technologies will enable the entire coal resource base to be used while complying with environmental requirements. These technologies are producing products used by utilities and industrial processes. The capability to coproduce products, such as liquid and solid fuels, electricity, and chemicals, is being demonstrated at a commercial scale by projects in the CCT Program. In summary, this portfolio of technologies is satisfying the national need to maintain a multifuel energy mix in which coal is a key component because of its low-cost, availability, and abundant supply within the nation`s borders.

  3. Laser Science & Technology Program Annual Report - 2000

    Energy Technology Data Exchange (ETDEWEB)

    Chen, H-L

    2001-03-20

    The Laser Science and Technology (LS&T) Program Annual Report 2001 provides documentation of the achievements of the LLNL LS&T Program during the April 2001 to March 2002 period using three formats: (1) an Overview that is a narrative summary of important results for the year; (2) brief summaries of research and development activity highlights within the four Program elements: Advanced Lasers and Components (AL&C), Laser Optics and Materials (LO&M), Short Pulse Laser Applications and Technologies (SPLAT), and High-Energy Laser System and Tests (HELST); and (3) a compilation of selected articles and technical reports published in reputable scientific or technology journals in this period. All three elements (Annual Overview, Activity Highlights, and Technical Reports) are also on the Web: http://laser.llnl.gov/lasers/pubs/icfq.html. The underlying mission for the LS&T Program is to develop advanced lasers, optics, and materials technologies and applications to solve problems and create new capabilities of importance to the Laboratory and the nation. This mission statement has been our guide for defining work appropriate for our Program. A major new focus of LS&T beginning this past year has been the development of high peak power short-pulse capability for the National Ignition Facility (NIF). LS&T is committed to this activity.

  4. Near-Net Forging Technology Demonstration Program

    Science.gov (United States)

    Hall, I. Keith

    1996-01-01

    Significant advantages in specific mechanical properties, when compared to conventional aluminum (Al) alloys, make aluminum-lithium (Al-Li) alloys attractive candidate materials for use in cryogenic propellant tanks and dry bay structures. However, the cost of Al-Li alloys is typically five times that of 2219 aluminum. If conventional fabrication processes are employed to fabricate launch vehicle structure, the material costs will restrict their utilization. In order to fully exploit the potential cost and performance benefits of Al-Li alloys, it is necessary that near-net manufacturing methods be developed to off-set or reduce raw material costs. Near-net forging is an advanced manufacturing method that uses elevated temperature metal movement (forging) to fabricate a single piece, near-net shape, structure. This process is termed 'near-net' because only a minimal amount of post-forge machining is required. The near-net forging process was developed to reduce the material scrap rate (buy-to-fly ratio) and fabrication costs associated with conventional manufacturing methods. The goal for the near-net forging process, when mature, is to achieve an overall cost reduction of approximately 50 percent compared with conventional manufacturing options for producing structures fabricated from Al-Li alloys. This NASA Marshall Space Flight Center (MSFC) sponsored program has been a part of a unique government / industry partnership, coordinated to develop and demonstrate near-net forging technology. The objective of this program was to demonstrate scale-up of the near-net forging process. This objective was successfully achieved by fabricating four integrally stiffened, 170- inch diameter by 20-inch tall, Al-Li alloy 2195, Y-ring adapters. Initially, two 2195 Al-Li ingots were converted and back extruded to produce four cylindrical blockers. Conventional ring rolling of the blockers was performed to produce ring preforms, which were then contour ring rolled to produce

  5. Geothermal Technologies Program Blue Ribbon Panel Recommendations

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2011-06-17

    The Geothermal Technologies Program assembled a geothermal Blue Ribbon Panel on March 22-23, 2011 in Albuquerque, New Mexico for a guided discussion on the future of geothermal energy in the United States and the role of the DOE Program. The Geothermal Blue Ribbon Panel Report captures the discussions and recommendations of the experts. An addendum is available here: http://www.eere.energy.gov/geothermal/pdfs/gtp_blue_ribbon_panel_report_addendum10-2011.pdf

  6. Usage of Wifi Technology for PLC Programming

    OpenAIRE

    Jaromír ŠKUTA

    2009-01-01

    This contribution describes usage of WIFI technology for programming and parameterization of application in PLC. INSYS WLAN unit from the Microelectronics INSYS Corporation is the base of application. Software access point with using USB WIFI component WL167 is running in industrial PC. Particular PC clients are connecting into network infrastructure PLC by the help of this access point and INSYS WLAN unit. This connection allows configuring and uploading program into this PLC.

  7. Validation of the Intrapersonal Technology Integration Scale: Assessing the Influence of Intrapersonal Factors that Influence Technology Integration

    Science.gov (United States)

    Niederhauser, Dale S.; Perkmen, Serkan

    2008-01-01

    Teachers' beliefs about their self-efficacy for integrating technology, their outcome expectations for integrating technology, and their interest in using technology to support student learning influence their intentions for incorporating technology into their instructional practices. To date, instruments developed to examine the relationships…

  8. Integrating Pareto Optimization into Dynamic Programming

    Directory of Open Access Journals (Sweden)

    Thomas Gatter

    2016-01-01

    Full Text Available Pareto optimization combines independent objectives by computing the Pareto front of the search space, yielding a set of optima where none scores better on all objectives than any other. Recently, it was shown that Pareto optimization seamlessly integrates with algebraic dynamic programming: when scoring schemes A and B can correctly evaluate the search space via dynamic programming, then so can Pareto optimization with respect to A and B. However, the integration of Pareto optimization into dynamic programming opens a wide range of algorithmic alternatives, which we study in substantial detail in this article, using real-world applications in biosequence analysis, a field where dynamic programming is ubiquitous. Our results are two-fold: (1 We introduce the operation of a “Pareto algebra product” in the dynamic programming framework of Bellman’s GAP. Users of this framework can now ask for Pareto optimization with a single keystroke. Careful evaluation of the implementation alternatives by means of an extended Bellman’s GAP compiler demonstrates the dependence of the best implementation choice on the application at hand. (2 We extract from our experiments several pieces of advice to programmers who do not use a system such as Bellman’s GAP, but who choose to hand-craft their dynamic programming recurrences, incorporating Pareto optimization from scratch.

  9. A Framework for Integration of IVHM Technologies for Intelligent Integration for Vehicle Management

    Science.gov (United States)

    Paris, Deidre E.; Trevino, Luis; Watson, Mike

    2005-01-01

    As a part of the overall goal of developing Integrated Vehicle Health Management (IVHM) systems for aerospace vehicles, the NASA Faculty Fellowship Program (NFFP) at Marshall Space Flight Center has performed a pilot study on IVHM principals which integrates researched IVHM technologies in support of Integrated Intelligent Vehicle Management (IIVM). IVHM is the process of assessing, preserving, and restoring system functionality across flight and ground systems (NASA NGLT 2004). The framework presented in this paper integrates advanced computational techniques with sensor and communication technologies for spacecraft that can generate responses through detection, diagnosis, reasoning, and adapt to system faults in support of IIVM. These real-time responses allow the IIVM to modify the effected vehicle subsystem(s) prior to a catastrophic event. Furthermore, the objective of this pilot program is to develop and integrate technologies which can provide a continuous, intelligent, and adaptive health state of a vehicle and use this information to improve safety and reduce costs of operations. Recent investments in avionics, health management, and controls have been directed towards IIVM. As this concept has matured, it has become clear the IIVM requires the same sensors and processing capabilities as the real-time avionics functions to support diagnosis of subsystem problems. New sensors have been proposed, in addition, to augment the avionics sensors to support better system monitoring and diagnostics. As the designs have been considered, a synergy has been realized where the real-time avionics can utilize sensors proposed for diagnostics and prognostics to make better real-time decisions in response to detected failures. IIVM provides for a single system allowing modularity of functions and hardware across the vehicle. The framework that supports IIVM consists of 11 major on-board functions necessary to fully manage a space vehicle maintaining crew safety and mission

  10. Human Research Program Integrated Research Plan. Revision A January 2009

    Science.gov (United States)

    2009-01-01

    The Integrated Research Plan (IRP) describes the portfolio of Human Research Program (HRP) research and technology tasks. The IRP is the HRP strategic and tactical plan for research necessary to meet HRP requirements. The need to produce an IRP is established in HRP-47052, Human Research Program - Program Plan, and is under configuration management control of the Human Research Program Control Board (HRPCB). Crew health and performance is critical to successful human exploration beyond low Earth orbit. The Human Research Program (HRP) is essential to enabling extended periods of space exploration because it provides knowledge and tools to mitigate risks to human health and performance. Risks include physiological and behavioral effects from radiation and hypogravity environments, as well as unique challenges in medical support, human factors, and behavioral or psychological factors. The Human Research Program (HRP) delivers human health and performance countermeasures, knowledge, technologies and tools to enable safe, reliable, and productive human space exploration. Without HRP results, NASA will face unknown and unacceptable risks for mission success and post-mission crew health. This Integrated Research Plan (IRP) describes HRP s approach and research activities that are intended to address the needs of human space exploration and serve HRP customers and how they are integrated to provide a risk mitigation tool. The scope of the IRP is limited to the activities that can be conducted with the resources available to the HRP; it does not contain activities that would be performed if additional resources were available. The timescale of human space exploration is envisioned to take many decades. The IRP illustrates the program s research plan through the timescale of early lunar missions of extended duration.

  11. Technologies for building integrated energy supply; Teknologier for bygningsintegreret energiforsyning

    Energy Technology Data Exchange (ETDEWEB)

    Katic, I.

    2011-07-15

    The current report is part of the deliverables from the project ''Building Integrated Energy Supply'' supported by the Danish Energy Authority R and D program. It describes a range of technologies for individual supply of heat and/or electricity to dwellings with respect to their stage of development and possible application in the near future. Energy supply of buildings is becoming more and more complex, partly as a result of increasing demands for comfort, efficiency and reduced emissions, partly as a result of rising oil prices and improved competitiveness of alternative energy sources. The days where ordinary boilers were the dominant source of individual supply of dwellings are becoming past these years. The challenge of the new range of technologies lies to a high extent in the fluctuating nature of their energy conversion and their interaction with the supply grids for heat and electricity. There is thus an increasing demand to understand the nature of the different supply technologies, besides a regular update of their economical key figures. The technologies briefly described in this study are: Solar heating, passive solar energy, biofuel boilers, heat pumps, micro CHP, solar photovoltaic and energy storage systems. The selected technologies are all assessed to play an important role in future's mix of supply technologies in Denmark, especially heat pumps and solar. (Author)

  12. 76 FR 4350 - Health Information Technology Extension Program

    Science.gov (United States)

    2011-01-25

    ... HUMAN SERVICES Health Information Technology Extension Program ACTION: Public Notice. SUMMARY: This notice announces changes to the Health Information Technology Extension Program, which assists providers seeking to adopt and become meaningful users of health information technology, as authorized under...

  13. Evaluating Pain Education Programs: An Integrated Approach

    Directory of Open Access Journals (Sweden)

    Adam Dubrowski

    2011-01-01

    Full Text Available Evaluation of educational programs and assessment of learning are essential to maintain high-standard health science education, which includes pain education. Current models of program evaluations applied to the education of the health professions, such as the Kirkpatrick model, are mainly outcome based. More recently, efforts have been made to examine other process-based models such as the Context Input Process Product model. The present article proposes an approach that integrates both outcome- and process-based models with models of clinical performance assessment to provide a deeper understanding of a program function. Because assessment instruments are a critical part of program evaluation, it is suggested that standardization and rigour should be used in their selection, development and adaptation. The present article suggests an alternative to currently used models in pain education evaluation.

  14. Integrated Data Base Program: a status report

    Energy Technology Data Exchange (ETDEWEB)

    Notz, K.J.; Klein, J.A.

    1984-06-01

    The Integrated Data Base (IDB) Program provides official Department of Energy (DOE) data on spent fuel and radioactive waste inventories, projections, and characteristics. The accomplishments of FY 1983 are summarized for three broad areas: (1) upgrading and issuing of the annual report on spent fuel and radioactive waste inventories, projections, and characteristics, including ORIGEN2 applications and a quality assurance plan; (2) creation of a summary data file in user-friendly format for use on a personal computer and enhancing user access to program data; and (3) optimizing and documentation of the data handling methodology used by the IDB Program and providing direct support to other DOE programs and sites in data handling. Plans for future work in these three areas are outlined. 23 references, 11 figures.

  15. A Technology Program that Rescues Spacecraft

    Science.gov (United States)

    Deutsch, Leslie J.; Lesh, J. R.

    2004-03-01

    There has never been a long-duration deep space mission that did not have unexpected problems during operations. JPL's Interplanetary Network Directorate (IND) Technology Program was created to develop new and improved methods of communication, navigation, and operations. A side benefit of the program is that it maintains a cadre of human talent and experimental systems that can be brought to bear on unexpected problems that may occur during mission operations. Solutions fall into four categories: applying new technology during operations to enhance science performance, developing new operational strategies, providing domain experts to help find solutions, and providing special facilities to trouble-shoot problems. These are illustrated here using five specific examples of spacecraft anomalies that have been solved using, at least in part, expertise or facilities from the IND Technology Program: Mariner 10, Voyager, Galileo, SOHO, and Cassini/Huygens. In this era of careful cost management, and emphasis on returns-on-investment, it is important to recognize this crucial additional benefit from such technology program investments.

  16. Application of Statistics in Engineering Technology Programs

    Science.gov (United States)

    Zhan, Wei; Fink, Rainer; Fang, Alex

    2010-01-01

    Statistics is a critical tool for robustness analysis, measurement system error analysis, test data analysis, probabilistic risk assessment, and many other fields in the engineering world. Traditionally, however, statistics is not extensively used in undergraduate engineering technology (ET) programs, resulting in a major disconnect from industry…

  17. Suicide Prevention in the Dot Com Era: Technological Aspects of a University Suicide Prevention Program

    Science.gov (United States)

    Manning, Jessica; VanDeusen, Karen

    2011-01-01

    Western Michigan University's Suicide Prevention Program utilizes multiple technological components, including an online training course, a Web site, and 2 social networking Web site profiles, as integral aspects of a comprehensive program. This article discusses the development, maintenance, use, and impact of the technological aspects of this…

  18. Assistive Technology in Teacher-Training Programs: A National and International Perspective

    Science.gov (United States)

    Safhi, Mohammad Y.; Zhou, Li; Smith, Derrick W.; Kelley, Pat

    2009-01-01

    The study presented here investigated how assistive technology training is being integrated into teacher preparation programs for teachers of students with visual impairments worldwide. The survey investigated how knowledge of assistive technology is addressed (whether in specific courses or by embedding the content throughout the program), what…

  19. Integrated, Automated Distributed Generation Technologies Demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, Kevin

    2014-09-30

    The purpose of the NETL Project was to develop a diverse combination of distributed renewable generation technologies and controls and demonstrate how the renewable generation could help manage substation peak demand at the ATK Promontory plant site. The Promontory plant site is located in the northwestern Utah desert approximately 25 miles west of Brigham City, Utah. The plant encompasses 20,000 acres and has over 500 buildings. The ATK Promontory plant primarily manufactures solid propellant rocket motors for both commercial and government launch systems. The original project objectives focused on distributed generation; a 100 kW (kilowatt) wind turbine, a 100 kW new technology waste heat generation unit, a 500 kW energy storage system, and an intelligent system-wide automation system to monitor and control the renewable energy devices then release the stored energy during the peak demand time. The original goal was to reduce peak demand from the electrical utility company, Rocky Mountain Power (RMP), by 3.4%. For a period of time we also sought to integrate our energy storage requirements with a flywheel storage system (500 kW) proposed for the Promontory/RMP Substation. Ultimately the flywheel storage system could not meet our project timetable, so the storage requirement was switched to a battery storage system (300 kW.) A secondary objective was to design/install a bi-directional customer/utility gateway application for real-time visibility and communications between RMP, and ATK. This objective was not achieved because of technical issues with RMP, ATK Information Technology Department’s stringent requirements based on being a rocket motor manufacturing facility, and budget constraints. Of the original objectives, the following were achieved: • Installation of a 100 kW wind turbine. • Installation of a 300 kW battery storage system. • Integrated control system installed to offset electrical demand by releasing stored energy from renewable sources

  20. Integrated, Automated Distributed Generation Technologies Demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, Kevin [Atk Launch Systems Inc., Brigham City, UT (United States)

    2014-09-01

    The purpose of the NETL Project was to develop a diverse combination of distributed renewable generation technologies and controls and demonstrate how the renewable generation could help manage substation peak demand at the ATK Promontory plant site. The Promontory plant site is located in the northwestern Utah desert approximately 25 miles west of Brigham City, Utah. The plant encompasses 20,000 acres and has over 500 buildings. The ATK Promontory plant primarily manufactures solid propellant rocket motors for both commercial and government launch systems. The original project objectives focused on distributed generation; a 100 kW (kilowatt) wind turbine, a 100 kW new technology waste heat generation unit, a 500 kW energy storage system, and an intelligent system-wide automation system to monitor and control the renewable energy devices then release the stored energy during the peak demand time. The original goal was to reduce peak demand from the electrical utility company, Rocky Mountain Power (RMP), by 3.4%. For a period of time we also sought to integrate our energy storage requirements with a flywheel storage system (500 kW) proposed for the Promontory/RMP Substation. Ultimately the flywheel storage system could not meet our project timetable, so the storage requirement was switched to a battery storage system (300 kW.) A secondary objective was to design/install a bi-directional customer/utility gateway application for real-time visibility and communications between RMP, and ATK. This objective was not achieved because of technical issues with RMP, ATK Information Technology Department’s stringent requirements based on being a rocket motor manufacturing facility, and budget constraints. Of the original objectives, the following were achieved: • Installation of a 100 kW wind turbine. • Installation of a 300 kW battery storage system. • Integrated control system installed to offset electrical demand by releasing stored energy from renewable sources

  1. The Impact of Technology Integration through a Transformative Approach

    Science.gov (United States)

    Cubillos, Jo Ann

    2013-01-01

    The integration of technology into classroom instruction in K-12 schools remains problematic. The problems associated with this integration are troubling, as technology integration may change a teacher's pedagogy toward more innovative approaches that increase student achievement. The purpose of this study was to document teachers' experiences as…

  2. Strategies for Defining and Understanding Critical Technology Integration Terms

    Science.gov (United States)

    Fagehi, Ahmed Yahya

    2013-01-01

    Educational technology scholars believe that teachers should understand how to effectively integrate technology in their teaching. This study identified key terms related to integrating technology in education and investigated the effectiveness of three online instructional strategies (Text-only, Text plus Video, and Text plus Video plus Question)…

  3. Teachers' Preparation Needs for Integrating Technology in the Classroom

    Science.gov (United States)

    Jackson, Barcus C.

    2013-01-01

    School districts across the country are charged with preparing the next generation for competing in a global economy and have spent billions of dollars on technology acquisition and Internet use. However, teachers do not feel prepared to integrate technology in the classroom. To prepare teachers for technology integration, the most common approach…

  4. Teachers' Preparation Needs for Integrating Technology in the Classroom

    Science.gov (United States)

    Jackson, Barcus C.

    2013-01-01

    School districts across the country are charged with preparing the next generation for competing in a global economy and have spent billions of dollars on technology acquisition and Internet use. However, teachers do not feel prepared to integrate technology in the classroom. To prepare teachers for technology integration, the most common approach…

  5. Compressed air energy storage technology program

    Science.gov (United States)

    Loscutoff, W. V.

    1980-06-01

    Progress in the development of compressed air energy storage (CAES) technologies for central station electric utility applications is reported. It is reported that the concept improves the effectiveness of a gas turbine using petroleum fuels, could reduce petroleum fuel consumption of electric utility peaking plants, and is technically feasible and economically viable. Specific topics discussed include stability criteria for large underground reservoirs in salt domes, hard rock, and porous rock used for air storage in utility applications and second-generation technologies that have minimal or no dependence on petroleum fuels. The latter includes integration of thermal energy storage, fluidized bed combustion, or coal gasification with CAES.

  6. Enhancing technology acceptance: The role of the subsurface contaminants focus area external integration team

    Energy Technology Data Exchange (ETDEWEB)

    Kirwan-Taylor, H.; McCabe, G.H. [Battelle Seattle Research Center, WA (United States); Lesperance, A. [Pacific Northwest National Lab., Richland, WA (United States); Kauffman, J.; Serie, P.; Dressen, L. [EnvironIssues (United States)

    1996-09-01

    The US DOE is developing and deploying innovative technologies for cleaning up its contaminated facilities using a market-oriented approach. This report describes the activities of the Subsurface Contaminant Focus Area`s (SCFA) External Integration Team (EIT) in supporting DOE`s technology development program. The SCFA program for technology development is market-oriented, driven by the needs of end users. The purpose of EIT is to understand the technology needs of the DOE sites and identify technology acceptance criteria from users and other stakeholders to enhance deployment of innovative technologies. Stakeholders include regulators, technology users, Native Americans, and environmental and other interest groups. The success of this national program requires close coordination and communication among technology developers and stakeholders to work through all of the various phases of planning and implementation. Staff involved must be willing to commit significant amounts of time to extended discussions with the various stakeholders.

  7. Thermoelectric integrated membrane evaporation water recovery technology

    Science.gov (United States)

    Roebelen, G. J., Jr.; Winkler, H. E.; Dehner, G. F.

    1982-01-01

    The recently developed Thermoelectric Integrated Membrane Evaporation Subsystem (TIMES) offers a highly competitive approach to water recovery from waste fluids for future on-orbit stations such as the Space Operations Center. Low power, compactness and gravity insensitive operation are featured in this vacuum distillation subsystem that combines a hollow fiber membrane evaporator with a thermoelectric heat pump. The hollow fiber elements provide positive liquid/gas phase control with no moving parts other than pumps and an accumulator, thus solving problems inherent in other reclamation subsystem designs. In an extensive test program, over 850 hours of operation were accumulated during which time high quality product water was recovered from both urine and wash water at an average steady state production rate of 2.2 pounds per hour.

  8. Development of safety analysis technology for integral reactor

    Energy Technology Data Exchange (ETDEWEB)

    Sim, Suk K.; Song, J. H.; Chung, Y. J. and others

    1999-03-01

    Inherent safety features and safety system characteristics of the SMART integral reactor are investigated in this study. Performance and safety of the SMART conceptual design have been evaluated and confirmed through the performance and safety analyses using safety analysis system codes as well as a preliminary performance and safety analysis methodology. SMART design base events and their acceptance criteria are identified to develop a preliminary PIRT for the SMART integral reactor. Using the preliminary PIRT, a set of experimental program for the thermal hydraulic separate effect tests and the integral effect tests was developed for the thermal hydraulic model development and the system code validation. Safety characteristics as well as the safety issues of the integral reactor has been identified during the study, which will be used to resolve the safety issues and guide the regulatory criteria for the integral reactor. The results of the performance and safety analyses performed during the study were used to feedback for the SMART conceptual design. The performance and safety analysis code systems as well as the preliminary safety analysis methodology developed in this study will be validated as the SMART design evolves. The performance and safety analysis technology developed during the study will be utilized for the SMART basic design development. (author)

  9. Annual highlights of the energy technology programs

    Energy Technology Data Exchange (ETDEWEB)

    1978-12-01

    The Energy Storage and Conversion Division reports summary activities in the following: electrolysis-based hydrogen energy storage systems; an electrochemically regenerative hydrogen--halogen energy storage system; fuel cells (materials and electrolysis); high temperature water electrolysis; hydrogen energy storage systems for automobile propulsion; program planning for research related to energy conservation; New York Energy Office oil retrofit pilot program; burner-boiler/furnace testing; and proposed programs. The Engineering Division reports on solar-assisted heat pump systems; solar cooling subsystems and systems; solar demonstration project in Northeast U.S.; hardware simulators for tests of solar cooling/heating systems; fossil-energy programs; catalytic process for conversion of synthesis gas to methanol; coal-fired heater; coal/oil mixture combustion; rotating fluidized bed containing limestone for removal of sulfur from hot gases; improved oil and gas burners; residue and waste fuels; and proposed programs. The Conservation Program Management Group reports on conservation program management; space conditioning, diagnostics, and controls technology for conservation in buildings; and energy conservation in residential buildings. Funding for 1978 and 1979 for each program is indicated. (MCW)

  10. Wilberforce Power Technology in Education Program

    Science.gov (United States)

    Gordon, Edward M.; Buffinger, D. R.; Hehemann, D. G.; Breen, M. L.; Raffaelle, R. P.

    1999-01-01

    The Wilberforce Power Technology in Education Program is a multipart program. Three key parts of this program will be described. They are: (1) WISE-The Wilberforce Summer Intensive Experience. This annual offering is an educational program which is designed to provide both background reinforcement and a focus on study skills to give the participants a boost in their academic performance throughout their academic careers. It is offered to entering Wilberforce students. Those students who take advantage of WISE learn to improve important skills which enable them to work at higher levels in mathematics, science and engineering courses throughout their college careers, but most notably in the first year of college study. (2) Apply technology to reaming. This is being done in several ways including creating an electronic chemistry text with hypertext links to a glossary to help the students deal with the large new vocabulary required to describe and understand chemistry. It is also being done by converting lecture materials for the Biochemistry class to PowerPoint format. Technology is also being applied to learning by exploring simulation software of scientific instrumentation. (3) Wilberforce participation in collaborative research with NASA's John H. Glenn Research Center at Lewis Field. This research has focused on two areas in the past year. The first of these is the deposition of solar cell materials. A second area involves the development of polymeric materials for incorporation into thin film batteries.

  11. Dietary assessment in Africa: Integration with innovative technology ...

    African Journals Online (AJOL)

    Dietary assessment in Africa: Integration with innovative technology. ... African Journal of Food, Agriculture, Nutrition and Development ... an opportunity for exploring the benefits and general acceptance of using technology to improve health.

  12. The space shuttle program technologies and accomplishments

    CERN Document Server

    Sivolella, Davide

    2017-01-01

    This book tells the story of the Space Shuttle in its many different roles as orbital launch platform, orbital workshop, and science and technology laboratory. It focuses on the technology designed and developed to support the missions of the Space Shuttle program. Each mission is examined, from both the technical and managerial viewpoints. Although outwardly identical, the capabilities of the orbiters in the late years of the program were quite different from those in 1981. Sivolella traces the various improvements and modifications made to the shuttle over the years as part of each mission story. Technically accurate but with a pleasing narrative style and simple explanations of complex engineering concepts, the book provides details of many lesser known concepts, some developed but never flown, and commemorates the ingenuity of NASA and its partners in making each Space Shuttle mission push the boundaries of what we can accomplish in space. Using press kits, original papers, newspaper and magazine articles...

  13. Integrating Instructional Technologies in a Local Watershed Investigation with Urban Elementary Learners

    Science.gov (United States)

    Bodzin, Alec M.

    2008-01-01

    The author describes an after-school science club program for urban 4th-grade students that integrated instructional technologies to investigate a pond ecosystem in the local schoolyard. The author conducted a design-based evaluation study to examine the effectiveness of the program in promoting environmental attitudes and understandings of the…

  14. Integration of Study Abroad with Social Media Technologies and Decision-Making Applications

    Science.gov (United States)

    Deans, P. Candace

    2012-01-01

    This article describes the design and delivery of a program, "Global Business in a Digital World." The program integrates the use of social media technologies and business applications in a series of courses that include short-term study abroad components that focus on emerging markets. The objectives are to: (1) provide additional…

  15. Integration of Study Abroad with Social Media Technologies and Decision-Making Applications

    Science.gov (United States)

    Deans, P. Candace

    2012-01-01

    This article describes the design and delivery of a program, "Global Business in a Digital World." The program integrates the use of social media technologies and business applications in a series of courses that include short-term study abroad components that focus on emerging markets. The objectives are to: (1) provide additional…

  16. Teacher Perceptions of Electronic Portfolios as a Technology Integration Tool

    Science.gov (United States)

    Blackwell, John P., III.

    2013-01-01

    This qualitative case study explored the problem that teachers' attitudes and perceptions about technology often serve as barriers to successful technology integration in elementary school classrooms. Trends have showed that technology teachers directly responsible for teaching students technology skills are being laid off due to budget cuts…

  17. System Critical Design Audit (CDA). Books 1, 2 and 3; [Small Satellite Technology Initiative (SSTI Lewis Spacecraft Program)

    Science.gov (United States)

    1995-01-01

    Small Satellite Technology Initiative (SSTI) Lewis Spacecraft Program is evaluated. Spacecraft integration, test, launch, and spacecraft bus are discussed. Payloads and technology demonstrations are presented. Mission data management system and ground segment are also addressed.

  18. Porous silicon technology for integrated microsystems

    Science.gov (United States)

    Wallner, Jin Zheng

    With the development of micro systems, there is an increasing demand for integrable porous materials. In addition to those conventional applications, such as filtration, wicking, and insulating, many new micro devices, including micro reactors, sensors, actuators, and optical components, can benefit from porous materials. Conventional porous materials, such as ceramics and polymers, however, cannot meet the challenges posed by micro systems, due to their incompatibility with standard micro-fabrication processes. In an effort to produce porous materials that can be used in micro systems, porous silicon (PS) generated by anodization of single crystalline silicon has been investigated. In this work, the PS formation process has been extensively studied and characterized as a function of substrate type, crystal orientation, doping concentration, current density and surfactant concentration and type. Anodization conditions have been optimized for producing very thick porous silicon layers with uniform pore size, and for obtaining ideal pore morphologies. Three different types of porous silicon materials: meso porous silicon, macro porous silicon with straight pores, and macro porous silicon with tortuous pores, have been successfully produced. Regular pore arrays with controllable pore size in the range of 2mum to 6mum have been demonstrated as well. Localized PS formation has been achieved by using oxide/nitride/polysilicon stack as masking materials, which can withstand anodization in hydrofluoric acid up to twenty hours. A special etching cell with electrolytic liquid backside contact along with two process flows has been developed to enable the fabrication of thick macro porous silicon membranes with though wafer pores. For device assembly, Si-Au and In-Au bonding technologies have been developed. Very low bonding temperature (˜200°C) and thick/soft bonding layers (˜6mum) have been achieved by In-Au bonding technology, which is able to compensate the potentially

  19. Mini Technology Manual for Schools: An Introduction to Technology Integration

    Science.gov (United States)

    Grismore, Brian A.

    2012-01-01

    The purpose of this manual is to assist school leaders in beginning or developing the use of educational technology within their school or district. The manual covers topics: 1) advantages of educational technology; 2) types of technology used for learning and teaching; 3) how to make good decisions about the use of technology in schools; 4) the…

  20. High-level waste management technology program plan

    Energy Technology Data Exchange (ETDEWEB)

    Harmon, H.D.

    1995-01-01

    The purpose of this plan is to document the integrated technology program plan for the Savannah River Site (SRS) High-Level Waste (HLW) Management System. The mission of the SRS HLW System is to receive and store SRS high-level wastes in a see and environmentally sound, and to convert these wastes into forms suitable for final disposal. These final disposal forms are borosilicate glass to be sent to the Federal Repository, Saltstone grout to be disposed of on site, and treated waste water to be released to the environment via a permitted outfall. Thus, the technology development activities described herein are those activities required to enable successful accomplishment of this mission. The technology program is based on specific needs of the SRS HLW System and organized following the systems engineering level 3 functions. Technology needs for each level 3 function are listed as reference, enhancements, and alternatives. Finally, FY-95 funding, deliverables, and schedules are s in Chapter IV with details on the specific tasks that are funded in FY-95 provided in Appendix A. The information in this report represents the vision of activities as defined at the beginning of the fiscal year. Depending on emergent issues, funding changes, and other factors, programs and milestones may be adjusted during the fiscal year. The FY-95 SRS HLW technology program strongly emphasizes startup support for the Defense Waste Processing Facility and In-Tank Precipitation. Closure of technical issues associated with these operations has been given highest priority. Consequently, efforts on longer term enhancements and alternatives are receiving minimal funding. However, High-Level Waste Management is committed to participation in the national Radioactive Waste Tank Remediation Technology Focus Area. 4 refs., 5 figs., 9 tabs.

  1. ATP Interior Noise Technology and Flight Demonstration Program

    Science.gov (United States)

    Stephens, David G.; Powell, Clemans A.

    1988-01-01

    The paper provides an overview of the ATP (Advanced Turboprop Program) acoustics program with emphasis on the NASA technology program and the recent NASA/Industry demonstration programs aimed at understanding and controlling passenger cabin noise. Technology developments in propeller (source) noise, cabin noise transmission, and subjective acoustics are described. Finally, an overview of the industry demonstrator programs is presented.

  2. Divison of Environmental Control Technology program, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Mott, William E.

    1979-06-01

    This report covers Division of Environmental Control Technology projects in progress during FY 1978, within the Office of the Assistant Secretary for Environment, Department of Energy. It is the second in a planned series of annual reports. The Division of Environmental Control Technology (ECT) continues to support the Assistant Secretary for Environment (EV) in discharging two primary responsibilities: (1) under the Environmental Engineering (EE) Program, the independent overview and assessment of environmental control aspects of both the U.S. Department of Energy's (DOE) research, development, and demonstration (RD and D) programs and the Nation's energy policies, and (2) under the Decontamination and Decommissioning Program, the reduction of potential environmental hazards at the radioactively contaminated sites that are presently owned or were formerly used by the Government. This report presents a short summary of objectives, approach, progress and results, future plans, and a reference bibliography for each research, development, or assessment project within the program areas described above.

  3. Integrated diesel engine NOx reduction technology development

    Energy Technology Data Exchange (ETDEWEB)

    Hoelzer, J.; Zhu, J.; Savonen, C.L. [Detroit Diesel Corp., MI (United States); Kharas, K.C.C.; Bailey, O.H.; Miller, M.; Vuichard, J. [Allied Signal Environmental Catalysts, Tulsa, OK (United States)

    1997-12-31

    The effectiveness of catalyst performance is a function of the inlet exhaust gas temperature, gas flow rate, concentration of NO{sub x} and oxygen, and reductant quantity and species. Given this interrelationship, it becomes immediately clear that an integrated development approach is necessary. Such an approach is taken in this project. As such, the system development path is directed by an engine-catalyst engineering team. Of the tools at the engine engineer`s disposal the real-time aspects of computer assisted subsystem modeling is valuable. It will continue to be the case as ever more subtle improvements are needed to meet competitive performance, durability, and emission challenges. A review of recent prototype engines has shown that considerable improvements to base diesel engine technology are being made. For example, HSDI NO{sub x} has been reduced by a factor of two within the past ten years. However, additional substantial NO{sub x}/PM reduction is still required for the future. A viable lean NO{sub x} catalyst would be an attractive solution to this end. The results of recent high and low temperature catalyst developments were presented. High temperature base metal catalysts have been formulated to produce very good conversion efficiency and good thermal stability, albeit at temperatures near the upper range of diesel engine operation. Low temperature noble metal catalysts have been developed to provide performance of promising 4-way control but need increased NO{sub x} reduction efficiency.

  4. Overcoming Barriers to Classroom Technology Integration

    Science.gov (United States)

    Kelly, Daniel P.

    2015-01-01

    Technology-savvy teachers are often the "go to" staff members in schools for their colleagues' technology issues. These teachers are seen as leaders within their schools with respect to technology and often do not understand their peers' difficulties when bringing technology into the classroom. Understanding both the reasons teachers may…

  5. Overcoming Barriers to Classroom Technology Integration

    Science.gov (United States)

    Kelly, Daniel P.

    2015-01-01

    Technology-savvy teachers are often the "go to" staff members in schools for their colleagues' technology issues. These teachers are seen as leaders within their schools with respect to technology and often do not understand their peers' difficulties when bringing technology into the classroom. Understanding both the reasons teachers may…

  6. STEFINS: a steel freezing integral simulation program

    Energy Technology Data Exchange (ETDEWEB)

    Frank, M.V.

    1980-09-01

    STEFINS (STEel Freezing INtegral Simulation) is a computer program for the calculation of the rate of solidification of molten steel on solid steel. Such computations arize when investigating core melt accidents in fast reactors. In principle this problem involves a coupled two-dimensional thermal and hydraulic approach. However, by physically reasonable assumptions a decoupled approach has been developed. The transient solidification of molten steel on a cold wall is solved in the direction normal to the molten steel flow and independent from the solution for the molten steel temperature and Nusselt number along the direction of flow. The solutions to the applicable energy equations have been programmed in cylindrical and slab geometries. Internal gamma heating of steel is included.

  7. Principles for Integrating Mars Analog Science, Operations, and Technology Research

    Science.gov (United States)

    Clancey, William J.

    2003-01-01

    During the Apollo program, the scientific community and NASA used terrestrial analog sites for understanding planetary features and for training astronauts to be scientists. Human factors studies (Harrison, Clearwater, & McKay 1991; Stuster 1996) have focused on the effects of isolation in extreme environments. More recently, with the advent of wireless computing, we have prototyped advanced EVA technologies for navigation, scheduling, and science data logging (Clancey 2002b; Clancey et al., in press). Combining these interests in a single expedition enables tremendous synergy and authenticity, as pioneered by Pascal Lee's Haughton-Mars Project (Lee 2001; Clancey 2000a) and the Mars Society s research stations on a crater rim on Devon Island in the High Canadian Arctic (Clancey 2000b; 2001b) and the Morrison Formation of southeast Utah (Clancey 2002a). Based on this experience, the following principles are proposed for conducting an integrated science, operations, and technology research program at analog sites: 1) Authentic work; 2) PI-based projects; 3) Unencumbered baseline studies; 4) Closed simulations; and 5) Observation and documentation. Following these principles, we have been integrating field science, operations research, and technology development at analog sites on Devon Island and in Utah over the past five years. Analytic methods include work practice simulation (Clancey 2002c; Sierhuis et a]., 2000a;b), by which the interaction of human behavior, facilities, geography, tools, and procedures are formalized in computer models. These models are then converted into the runtime EVA system we call mobile agents (Clancey 2002b; Clancey et al., in press). Furthermore, we have found that the Apollo Lunar Surface Journal (Jones, 1999) provides a vast repository or understanding astronaut and CapCom interactions, serving as a baseline for Mars operations and quickly highlighting opportunities for computer automation (Clancey, in press).

  8. Structural Integrity Program for INTEC Calcined Solids Storage Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Jeffrey Bryant

    2008-08-30

    This report documents the activities of the structural integrity program at the Idaho Nuclear Technology and Engineering Center relevant to the high-level waste Calcined Solids Storage Facilities and associated equipment, as required by DOE M 435.1-1, 'Radioactive Waste Management Manual'. Based on the evaluation documented in this report, the Calcined Solids Storage Facilities are not leaking and are structurally sound for continued service. Recommendations are provided for continued monitoring of the Calcined Solids Storage Facilities.

  9. Clean coal technology: Export finance programs

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-30

    Participation by US firms in the development of Clean Coal. Technology (CCT) projects in foreign countries will help the United States achieve multiple national objectives simultaneously--addressing critical goals related to energy, environmental technology, industrial competitiveness and international trade. US participation in these projects will result in an improved global environment, an improvement in the balance of payments and an increase in US jobs. Meanwhile, host countries will benefit from the development of economically- and environmentally-sound power facilities. The Clean Air Act Amendments of 1990 (Public Law 101-549, Section 409) as supplemented by a requirement in the Energy Policy Act of 1992 (Public Law 102-486, Section 1331(f)) requires that the Secretary of Energy, acting through the Trade Promotion Coordinating Committee Subgroup on Clean Coal Technologies, submit a report to Congress with information on the status of recommendations made in the US Department of Energy, Clean Coal Technology Export Programs, Report to the United States Congress, February 1992. Specific emphasis is placed on the adequacy of financial assistance for export of CCTS. This report fulfills the requirements of the Act. In addition, although this report focuses on CCT power projects, the issues it raises about the financing of these projects are also relevant to other CCT projects such as industrial applications or coal preparation, as well as to a much broader range of energy and environmental technology projects worldwide.

  10. Integrating Instructional Technology with Information Technology and Its Implications for Designing Electronic Learning Systems.

    Science.gov (United States)

    Abdelraheem, Ahmed Yousif

    2005-01-01

    In this paper the concepts of technology, instructional technology, and information technology are presented. The integration of instructional technology, and information technology is established and its implications for electronic learning systems design are discussed. One can say that: information and instructional designers can design…

  11. Technology Leadership or Technology Somnambulism? Exploring the Discourse of Integration amongst Information and Communication Technology Coordinators

    Science.gov (United States)

    McDonagh, Adrian; McGarr, Oliver

    2015-01-01

    This research aimed to explore information and communication technology (ICT) coordinators' discourse in relation to ICT integration in a sample of Irish post-primary schools. As ICT leaders in their schools, how they conceptualise ICT significantly influences school-based policy and use. The research involved semi-structured interviews with a…

  12. Technology Integration in a Science Classroom: Preservice Teachers' Perceptions

    Science.gov (United States)

    Rehmat, Abeera P.; Bailey, Janelle M.

    2014-12-01

    The challenge of preparing students for the information age has prompted administrators to increase technology in the public schools. Yet despite the increased availability of technology in schools, few teachers are integrating technology for instructional purposes. Preservice teachers must be equipped with adequate content knowledge of technology to create an advantageous learning experience in science classrooms. To understand preservice teachers' conceptions of technology integration, this research study explored 15 elementary science methods students' definitions of technology and their attitudes toward incorporating technology into their teaching. The phenomenological study took place in a science methods course that was based on a constructivist approach to teaching and learning science through science activities and class discussions, with an emphasis on a teacher beliefs framework. Data were collected throughout the semester, including an open-ended pre/post-technology integration survey, lesson plans, and reflections on activities conducted throughout the course. Through a qualitative analysis, we identified improvements in students' technology definitions, increased technology incorporation into science lesson plans, and favorable attitudes toward technology integration in science teaching after instruction. This research project demonstrates that positive changes in beliefs and behaviors relating to technology integration in science instruction among preservice teachers are possible through explicit instruction.

  13. An integrated scheduling and program management system

    Science.gov (United States)

    Porter, D.; Gibson, J. D.; Williams, G. G.

    2012-09-01

    An integrated scheduling and program management system is being developed for the MMT Observatory (MMTO), Arizona, USA. A systems engineering approach is used to combine existing and new relational databases, spreadsheets, file storage systems, and web-based user interfaces into a single unified system. An overview of software design, data management, user interfaces, and techniques for performance assessment is presented. Goals of this system include streamlined data management and an optimized user experience. The MMTO has over a dozen different telescope configurations, including three secondary mirrors and a wide range of observing instruments. Scheduling is complex for the varying telescope configurations, limited available observing time, and appropriate astronomic conditions (e.g., lunar phase) for each science project. Scheduled telescope configurations can be used to perform safety checks of actual configuration during telescope operations. Programmatic information is automatically input into nightly telescope operator (TO) logs by the system. The TO's provide additional information into the system on telescope usage, observing conditions (e.g., weather conditions), and observatory closure (e.g., from instrument malfunction or inclement weather). All of this information is synthesized to assess telescope and observatory performance. Web interfaces to the system can be used by observers to submit information, such as travel plans, instrumentation requirements, and observing catalogs. A service request (SR) (i.e., trouble report) system has also been developed for tracking operational issues. The specific needs of the MMTO have been met through in-house software development of this integrated scheduling and program management system.

  14. Laser Science and Technology Program Update 2001

    Energy Technology Data Exchange (ETDEWEB)

    Chen, H L; Hackel, L A

    2002-01-01

    The Laser Science and Technology (LS&T) Program's mission is to develop advanced solid-state lasers, optics, materials technologies, and applications to solve problems and create new capabilities of importance to the Nation and the Laboratory. A top, near-term priority is to provide technical support to the National Ignition Facility (NIF) to ensure activation success. LS&T provides the NIF Programs with core competencies and supports its economic viability. The primary objectives of LS&T activities in fiscal year (FY) 2001 have been threefold: (1) to support deployment of hardware and to enhance lasers and optics performance for NIF, (2) to develop advanced solid-state laser systems and optical components for the Department of Energy (DOE) and the Department of Defense (DoD), and (3) to invent, develop, and deliver improved concepts and hardware for other government agencies and U.S. industry. Special efforts have also been devoted to building and maintaining our capabilities in three technology areas: high-power solid-state lasers, high-power optical materials, and applications of advanced lasers.

  15. Evaluating Computer Technology Integration in a Centralized School System

    Science.gov (United States)

    Eteokleous, N.

    2008-01-01

    The study evaluated the current situation in Cyprus elementary classrooms regarding computer technology integration in an attempt to identify ways of expanding teachers' and students' experiences with computer technology. It examined how Cypriot elementary teachers use computers, and the factors that influence computer integration in their…

  16. Melissa's Year in Sixth Grade: A Technology Integration Vignette.

    Science.gov (United States)

    Hemmer, Jeanie

    1998-01-01

    In 1995, rather than require seventh-grade computer literacy classes, Texas allowed school districts to integrate technology skills into curricula. This article, the first of three, describes technology integration for sixth grade. Includes unit ideas on nations; the Holocaust; Olympic diving; Christmas; probability; organisms; Antarctica;…

  17. Integrating Educational Technologies into the Culinary Classroom and Instructional Kitchen

    Science.gov (United States)

    Glass, Samuel

    2005-01-01

    The integration of educational technologies has and will continue to change the nature of education. From the advent of the printed word to the current use of computer assisted teaching and learning, the use of technology is an integral part of modern day realities and approaches to education. The purpose of this paper is to review some of the…

  18. Research and technology operating plan summary: Fiscal year 1975 research and technology program. [space programs, energy technology, and aerospace sciences

    Science.gov (United States)

    1975-01-01

    Summaries are presented of Research and Technology Operating Plans currently in progress throughout NASA. Citations and abstracts of the operating plans are presented along with a subject index, technical monitor index, and responsible NASA organization index. Research programs presented include those carried out in the Office of Aeronautics and Space Technology, Office of Energy Programs, Office of Applications, Office of Space Sciences, Office of Tracking and Data Acquisition, and the Office of Manned Space Flight.

  19. Enterprise Application Integration Using Java Technologies

    Directory of Open Access Journals (Sweden)

    Alexandru BARBULESCU

    2006-01-01

    Full Text Available The current article points out some of the tasks and challenges companies must face in order to integrate their computerized systems and applications and then to place them on the Web. Also, the article shows how the Java 2 Enterprise Edition Platform and architecture helps the Web integration of applications. By offering standardized integration contracts, J2EE Platform allows application servers to play a key role in the process of Web integration of the applications.

  20. Faculty perceptions of the integration of SAP in academic programs

    Directory of Open Access Journals (Sweden)

    Sam Khoury

    2012-08-01

    Full Text Available In order to prepare students for the workforce, academic programs incorporate a variety of tools that students are likely to use in their future careers. One of these tools employed by business and technology programs is the integration of live software applications such as SAP through the SAP University Alliance (SAP UA program. Since the SAP UA program has been around for only about 10 years and the available literature on the topic is limited, research is needed to determine the strengths and weaknesses of the SAP UA program. A collaborative study of SAP UA faculty perceptions of their SAP UAs was conducted in the fall of 2011. Of the faculty invited to participate in the study, 31% completed the online survey. The results indicate that most faculty experienced difficulty implementing SAP into their programs and report that a need exists for more standardized curriculum and training, while a large percentage indicated that they are receiving the support they need from their schools and SAP.

  1. Technology integrated teaching in Malaysian schools: GIS, a SWOT analysis

    Directory of Open Access Journals (Sweden)

    Habibah Lateh, vasugiammai muniandy

    2011-08-01

    Full Text Available Geographical Information System (GIS has been introduced and widely used in schools in various countries. The year 1990 onwards, the implementation of GIS in schools showed an increase. This is due to the drastic changes and reforms in the education system. Even though the name GIS suits well to the Geography subject, but it is widely integrated in various subjects such as History, Chemistry, Physics and Science. In Malaysia, GIS is common in fields such as risk management, architecture, town planning and municipal department. Anyhow, it is still unknown in the school education system. Even upper secondary students are not familiar with GIS. The Ministry of Education in Malaysia has been continuously reforming the education towards the aim of creating a society based on economic fundamentals and knowledge. The Master Plan for Educational Development with the aim of developing individual potential with well-integrated and balanced education is already on field. Recently, Malaysia invested 18 % of the annual national budget towards upgrading its education system. The computer in education program started in 1999. Three hundred and twenty two schools were chosen as ‘break a way’ from conventional teaching method towards technology integrated teaching. Projects such as New Primary School Curriculum (KBSR, Integrated Secondary School Curriculum (KBSM, Smart School Project, School Access Centre were introduced constantly. Teacher as the cogwheel of innovations in schools were given courses in aim to develop their ICT knowledge and skill. To this date, the technology integration in subjects is not equal and it disperses through subjects. Geography is one of the ‘dry’ subjects in schools with less technology which is not preferable among students. Geographical Information System (GIS is foremost the best Geographical Information Technology (GIT to be implied in geography subject. In Malaysian Education System, GIS is still exposed just in papers

  2. Hanford technology integration: A success story

    Energy Technology Data Exchange (ETDEWEB)

    Stenehjem, E.J.; Pond, D.J.; Widrig, J.E.; Deonigi, D.E.

    1994-10-01

    This paper describes recent activities of the Richland Northwest Laboratory in the area of technology transfer. A major thrust within major DOE laboratories has been the implementation of technology transfer activities which transfer scientific knowledge, transfer technologies developed to deal with the production or conservation of energy, and transfer spinoff technologies into the private sector. Several activities which are in process or have been implemented are described in this paper.

  3. Using technology in assessing integrated science and mathematics learning

    Science.gov (United States)

    Berlin, Donna F.; White, Arthur L.

    1995-03-01

    Drawing from current models, research, and science and mathematics education reform documents, this article first defines and/or delimits three broad domains of education: integrated school science and mathematics, assessment, and technology. Based upon this three-tiered discussion, a list of characteristics is then distilled to guide in the development of assessment for integrated school science and mathematics using technology. Two integrated school science and mathematics activities are provided to illustrate the alignment of instruction and assessment and the systematic integration of technology into both.

  4. New Theoretical Approach Integrated Education and Technology

    Science.gov (United States)

    Ding, Gang

    2010-01-01

    The paper focuses on exploring new theoretical approach in education with development of online learning technology, from e-learning to u-learning and virtual reality technology, and points out possibilities such as constructing a new teaching ecological system, ubiquitous educational awareness with ubiquitous technology, and changing the…

  5. Analysis of Engineering Content within Technology Education Programs

    Science.gov (United States)

    Fantz, Todd D.; Katsioloudis, Petros J.

    2011-01-01

    In order to effectively teach engineering, technology teachers need to be taught engineering content, concepts, and related pedagogy. Some researchers posit that technology education programs may not have enough content to prepare technology teachers to teach engineering design. Certain technology teacher education programs have responded by…

  6. Technology choices for the Integrated Beam Experiment (IBX)

    Energy Technology Data Exchange (ETDEWEB)

    Leitner, M.A.; Celata, C.M.; Lee, E.P.; Sabbi, G.; Waldron, W.L.; Barnard, J.J.

    2002-10-31

    Over the next three years the research program of the Heavy Ion Fusion Virtual National Laboratory (HIF-VNL), a collaboration among LBNL, LLNL, and PPPL, is focused on separate scientific experiments in the injection, transport and focusing of intense heavy ion beams at currents from 100 mA to 1 A. As a next major step in the HIF-VNL program, we aim for a complete ''source-to-target'' experiment, the Integrated Beam Experiment (IBX). By combining the experience gained in the current separate beam experiments IBX would allow the integrated scientific study of the evolution of a single heavy ion beam at high current ({approx}1 A) through all sections of a possible heavy ion fusion accelerator: the injection, acceleration, compression, and beam focusing. This paper describes the main parameters and technology choices of the planned IBX experiment. IBX will accelerate singly charged potassium or argon ion beams up to 10 MeV final energy and a longitudinal beam compression ratio of 10, resulting in a beam current at target of more than 10 Amperes. Different accelerator cell design options are described in detail: Induction cores incorporating either room temperature pulsed focusing-magnets or superconducting magnets.

  7. National Advanced Drilling and Excavation Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    None

    1993-06-15

    The second meeting of Federal agency representatives interested in the National Advanced Drilling and Excavation Technologies (NADET) Program took place on June 15, 1993. The Geothermal Division of the U.S. Department of Energy (DOE) hosted the meeting at the Washington, D.C., offices of DOE. Representatives from the National Science Foundation, U.S. Geological Survey, U.S. Bureau of Mines, National Institute of Standards and Technology, National Aeronautics and Space Administration, Environmental Protection Agency, and various offices within the Department of Energy attended. For a complete list of attendees see Attachment A. The purpose of the meeting was: (1) to cover the status of efforts to gain formal approval for NADET, (2) to brief participants on events since the last meeting, especially two recent workshops that explored research needs in drilling and excavation, (3) to review some recent technological advances, and (4) to solicit statements of the importance of improving drilling and excavation technologies to the missions of the various agencies. The meeting agenda is included as Attachment B.

  8. Solid Polymer Electrolyte Fuel Cell Technology Program

    Science.gov (United States)

    1980-01-01

    Work is reported on phase 5 of the Solid Polymer Electrolyte (SPE) Fuel Cell Technology Development program. The SPE fuel cell life and performance was established at temperatures, pressures, and current densities significantly higher than those previously demonstrated in sub-scale hardware. Operation of single-cell Buildup No. 1 to establish life capabilities of the full-scale hardware was continued. A multi-cell full-scale unit (Buildup No. 2) was designed, fabricated, and test evaluated laying the groundwork for the construction of a reactor stack. A reactor stack was then designed, fabricated, and successfully test-evaluated to demonstrate the readiness of SPE fuel cell technology for future space applications.

  9. Ka-band MMIC subarray technology program (Ka-Mist)

    Science.gov (United States)

    Pottinger, W.

    1995-09-01

    Ka-band monolithic microwave integrated circuit (MMIC) arrays have been considered as having high potential for increasing the capability of space, aircraft, and land mobile communication systems in terms of scan performance, data rate, link margin, and flexibility while offering a significant reduction in size, weight, and power consumption. Insertion of MMIC technology into antenna systems, particularly at millimeter wave frequencies using low power and low noise amplifiers in closed proximity to the radiating elements, offers a significant improvement in the array transmit efficiency, receive system noise figure, and overall array reliability. Application of active array technology also leads to the use of advanced beamforming techniques that can improve beam agility, diversity, and adaptivity to complex signal environments. The objective of this program was to demonstrate the technical feasibility of the 'tile' array packaging architecture at EHF via the insertion of 1990 MMIC technology into a functional tile array or subarray module. The means test of this objective was to demonstrate and deliver to NASA a minimum of two 4 x 4 (16 radiating element) subarray modules operating in a transmit mode at 29.6 GHz. Available (1990) MMIC technology was chosen to focus the program effort on the novel interconnect schemes and packaging requirements rather than focusing on MMIC development. Major technical achievements of this program include the successful integration of two 4 x 4 subarray modules into a single antenna array. This 32 element array demonstrates a transmit EIRP of over 300 watts yielding an effective directive power gain in excess of 55 dB at 29.63 GHz. The array has been actively used as the transmit link in airborne/terrestrial mobile communication experiments accomplished via the ACTS satellite launched in August 1993.

  10. RF to millimeter wave integration and module technologies

    Science.gov (United States)

    Vähä-Heikkilä, T.

    2015-04-01

    Radio Frequency (RF) consumer applications have boosted silicon integrated circuits (IC) and corresponding technologies. More and more functions are integrated to ICs and their performance is also increasing. However, RF front-end modules with filters and switches as well as antennas still need other way of integration. This paper focuses to RF front-end module and antenna developments as well as to the integration of millimeter wave radios. VTT Technical Research Centre of Finland has developed both Low Temperature Co-fired Ceramics (LTCC) and Integrated Passive Devices (IPD) integration platforms for RF and millimeter wave integrated modules. In addition to in-house technologies, VTT is using module and component technologies from other commercial sources.

  11. Integrating ethics in health technology assessment: many ways to Rome

    NARCIS (Netherlands)

    Hofmann, B.; Oortwijn, W.; Lysdahl, K. Bakke; Refolo, P.; Sacchini, D.; Wilt, G.J. van der; Gerhardus, A.

    2015-01-01

    OBJECTIVES: The aim of this study was to identify and discuss appropriate approaches to integrate ethical inquiry in health technology assessment (HTA). METHODS: The key question is how ethics can be integrated in HTA. This is addressed in two steps: by investigating what it means to integrate ethic

  12. Improving K-12 STEM Education Outcomes through Technological Integration

    Science.gov (United States)

    Urban, Michael J., Ed.; Falvo, David A., Ed.

    2016-01-01

    The application of technology in classroom settings has equipped educators with innovative tools and techniques for effective teaching practice. Integrating digital technologies at the elementary and secondary levels helps to enrich the students' learning experience and maximize competency in the areas of science, technology, engineering, and…

  13. Technology Integration Barriers: Urban School Mathematics Teachers Perspectives

    Science.gov (United States)

    Wachira, Patrick; Keengwe, Jared

    2011-01-01

    Despite the promise of technology in education, many practicing teachers face several challenges when trying to effectively integrate technology into their classroom instruction. Additionally, while national statistics cite a remarkable improvement in access to computer technology tools in schools, teacher surveys show consistent declines in the…

  14. Buried Waste Integrated Demonstration Technology Preparedness and Status Report Guidance

    Energy Technology Data Exchange (ETDEWEB)

    Blacker, P.B.; Bonnenberg, R.W.; Cannon, P.G.; Hyde, R.A.; Watson, L.R.

    1994-04-01

    A Technology Preparedness and Status Report is required for each Technical Task Plan funded by the Buried Waste Integrated Demonstration. This document provides guidance for the preparation of that report. Major sections of the report will include a subset of the need for the technology, objectives of the demonstration, technology description and readiness evaluation, demonstration requirements, and preparedness checklist and action plan.

  15. Toward a Comprehensive Framework for Evaluating the Core Integration Features of Enterprise Integration Middleware Technologies

    Directory of Open Access Journals (Sweden)

    Hossein Moradi

    2013-01-01

    Full Text Available To achieve greater automation of their business processes, organizations face the challenge of integrating disparate systems. In attempting to overcome this problem, organizations are turning to different kinds of enterprise integration. Implementing enterprise integration is a complex task involving both technological and business challenges and requires appropriate middleware technologies. Different enterprise integration solutions provide various functions and features which lead to the complexity of their evaluation process. To overcome this complexity, appropriate tools for evaluating the core integration features of enterprise integration solutions is required. This paper proposes a new comprehensive framework for evaluating the core integration features of both intra-enterprise and inter-enterprise Integration's enabling technologies, which simplify the process of evaluating the requirements met by enterprise integration middleware technologies.The proposed framework for evaluating the core integration features of enterprise integration middleware technologies was enhanced using the structural and conceptual aspects of previous frameworks. It offers a new schema for which various enterprise integration middleware technologies are categorized in different classifications and are evaluated based on their supporting level for the core integration features' criteria. These criteria include the functional and supporting features. The proposed framework, which is a revised version of our previous framework in this area, has developed the scope, structure and content of the mentioned framework.

  16. Nuclear Technology Programs semiannual progress report, October 1988--March 1989

    Energy Technology Data Exchange (ETDEWEB)

    Harmon, J.E. [ed.

    1990-12-01

    This document reports on the work done by the Nuclear Technology Programs of the Chemical Technology Division, Argonne National Laboratory, in the period October 1988--March 1989. These programs involve R&D in three areas: applied physical chemistry, separation science and technology, and nuclear waste management. The work in applied physical chemistry includes investigations into the processes that control the release and transport of fission products under accident-like conditions, the thermophysical properties of metal fuel and blanket materials of the Integral Fast Reactor, and the properties of selected materials in environments simulating those of fusion energy systems. In the area of separation science and technology, the bulk of the effort is concerned with developing and implementing processes for the removal and concentration of actinides from waste streams contaminated by transuranic elements. Another effort is concerned with examining the feasibility of substituting low-enriched for high-enriched uranium in the production of fission product {sup 99}Mo. In the area of waste management, investigations are underway on the performance of materials in projected nuclear repository conditions to provide input to the licensing of the nation`s high-level waste repositories. 127 refs., 76 figs., 103 tabs.

  17. Nuclear Technology Programs semiannual progress report, April-- September 1990

    Energy Technology Data Exchange (ETDEWEB)

    Harmon, J.E. (ed.)

    1992-06-01

    This document reports on the work done by the Nuclear Technology Programs of the Chemical Technology Division, Argonne National Laboratory, in the period April--September 1990. These programs involve R D in three areas: applied physical chemistry, separation science and technology, and nuclear waste management. The work in applied physical chemistry includes investigations into the processes that control the release and transport of fission products under accident-like conditions in a light water reactor, the thermophysical properties of the metal fuel in the Integral Fast Reactor, and the properties of selected materials in environments simulating those of fusion energy systems. In the area of separation science and technology, the bulk of the effort is concerned with developing and implementing processes for the removal and concentration of actinides from waste streams contaminated by transuranic elements. In the area of waste management, investigations are underway on the performance of materials in projected nuclear repository conditions to provide input to the licensing of the nation's high-level waste repositories.

  18. Nuclear Technology Programs semiannual progress report, April-- September 1990

    Energy Technology Data Exchange (ETDEWEB)

    Harmon, J.E. [ed.

    1992-06-01

    This document reports on the work done by the Nuclear Technology Programs of the Chemical Technology Division, Argonne National Laboratory, in the period April--September 1990. These programs involve R&D in three areas: applied physical chemistry, separation science and technology, and nuclear waste management. The work in applied physical chemistry includes investigations into the processes that control the release and transport of fission products under accident-like conditions in a light water reactor, the thermophysical properties of the metal fuel in the Integral Fast Reactor, and the properties of selected materials in environments simulating those of fusion energy systems. In the area of separation science and technology, the bulk of the effort is concerned with developing and implementing processes for the removal and concentration of actinides from waste streams contaminated by transuranic elements. In the area of waste management, investigations are underway on the performance of materials in projected nuclear repository conditions to provide input to the licensing of the nation`s high-level waste repositories.

  19. Nuclear technology programs. Semiannual progress report, April--September 1991

    Energy Technology Data Exchange (ETDEWEB)

    1993-07-01

    This document reports on the work done by the Nuclear Technology Programs of the Chemical Technology Division, Argonne National Laboratory, in the period April through September 1991. These programs involve R & D in three areas: applied physical chemistry, separation science and technology, and nuclear waste management. The work in applied physical chemistry includes investigations into the processes that control the release and transport of fission products under accident-like conditions in a light water reactor, the thermophysical properties of the metal fuel in the Integral Fast Reactor, and the properties of selected materials in environments simulating those of fusion energy systems. In the area of separation science and technology, the bulk of the effort is concerned with developing and implementing processes for the removal and concentration of actinides from waste streams contaminated by transuranic elements. In the area of waste management, investigations are underway on the performance of materials in projected nuclear repository conditions to provide input to the licensing of the nation`s high-level waste repositories.

  20. Nuclear technology programs; Semiannual progress report, October 1989--March 1990

    Energy Technology Data Exchange (ETDEWEB)

    Harmon, J.E. [ed.

    1992-01-01

    This document reports on the work done by the Nuclear Technology Programs of the Chemical Technology Division, Argonne National Laboratory, in the period October 1989--March 1990. These programs involve R&D in three areas: applied physical chemistry, separation science and technology, and nuclear waste management. The work in applied physical chemistry includes investigations into the processes that control the release and transport of fission products under accident-like conditions, the thermophysical properties of metal fuel and blanket materials of the Integral Fast Reactor, and the properties of selected materials in environments simulating those of fusion energy systems. In the area of separation science and technology, the bulk of the effort is concerned with developing and implementing processes for the removal and concentration of actinides from waste streams contaminated by transuranic elements. Another effort is concerned water waste stream generated in production of 2,4,6-trinitrotoluene. In the area of waste management, investigations are underway on the performance of materials in projected nuclear repository conditions to provide input to the licensing of the nation`s high-level waste repositories.

  1. Nuclear Technology Programs semiannual progress report, October 1990--March 1991

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1992-12-01

    This document reports on the work done by the Nuclear Technology Programs of the Chemical Technology Division, Argonne National Laboratory, in the period October 1990--March 1991. These programs involve R&D in three areas: applied physical chemistry, separation science and technology, and nuclear waste management. The work in applied physical chemistry includes investigations into the processes that control the release and transpose of fission products under accident-like conditions in a light water reactor, the thermophysical properties of the metal fuel in the Integral Fast Reactor, and the properties of selected materials in environments simulating those of fusion energy systems. In the area of separation science and technology, the bulk of the effort is concerned with developing and implementing processes for the removal and concentration of actinides from waste streams contaminated by transuranic elements. In the area of waste management, investigations are underway on the performance of materials in projected nuclear repository conditions to provide input to the licensing of the nation`s high-level waste repositories.

  2. NASA Radioisotope Power System Program - Technology and Flight Systems

    Science.gov (United States)

    Sutliff, Thomas J.; Dudzinski, Leonard A.

    2009-01-01

    NASA sometimes conducts robotic science missions to solar system destinations for which the most appropriate power source is derived from thermal-to-electrical energy conversion of nuclear decay of radioactive isotopes. Typically the use of a radioisotope power system (RPS) has been limited to medium and large-scale missions, with 26 U,S, missions having used radioisotope power since 1961. A research portfolio of ten selected technologies selected in 2003 has progressed to a point of maturity, such that one particular technology may he considered for future mission use: the Advanced Stirling Converter. The Advanced Stirling Radioisotope Generator is a new power system in development based on this Stirling cycle dynamic power conversion technology. This system may be made available for smaller, Discovery-class NASA science missions. To assess possible uses of this new capability, NASA solicited and funded nine study teams to investigate unique opportunities for exploration of potential destinations for small Discovery-class missions. The influence of the results of these studies and the ongoing development of the Advanced Stirling Radioisotope Generator system are discussed in the context of an integrated Radioisotope Power System program. Discussion of other and future technology investments and program opportunities are provided.

  3. Laser Science and Technology Program Update 2002

    Energy Technology Data Exchange (ETDEWEB)

    Hackel, L A; Chen, H L

    2003-03-01

    The Laser Science and Technology (LS&T) Program's mission is to develop advanced lasers, optics, materials technologies, and applications to solve problems and create new capabilities of importance to the nation and the Laboratory. A top, near-term priority is to provide technical support in the deployment and upgrade of the National Ignition Facility (NIF). Our other program activities synergistically develop technologies that are of interest to the NIF Directorate but outside the scope of the NIF funding. The primary objectives of LS&T activities in 2002 have been fourfold--(a) to support deployment of hardware and to enhance laser and optics performance for NIF, (b) to develop high-energy petawatt laser science and technology for the Department of Energy (DOE), (c) to develop advanced solid-state laser systems and optical components for the Department of Defense (DoD), and to invent develop, and deliver improved concepts and hardware for other government agencies and industry. Special efforts have been devoted to building and maintaining our capabilities in three technology areas: high-power short-pulse solid-state lasers, high-power optical materials, and applications of advanced lasers. LS&T activities during 2002 focused on seven major areas: (1) NIF Project--LS&T led major advances in the deployment of NIF Final Optics Assembly (FOA) and the development of 3{omega} optics processing and treatment technologies to enhance NIF's operations and performance capabilities. (2) Stockpile Stewardship Program (SSP)--LS&T personnel continued development of ultrashort-pulse lasers and high-power, large-aperture optics for applications in SSP, extreme-field science and national defense. To enhance the high-energy petawatt (HEPW) capability in NIF, LS&T continued development of advanced compressor-grating and front-end laser technologies utilizing optical-parametric chirped-pulse amplification (OPCPA). (3) High-energy-density physics and inertial fusion energy

  4. Laser Science and Technology Program Update 2002

    Energy Technology Data Exchange (ETDEWEB)

    Hackel, L A; Chen, H L

    2003-03-01

    The Laser Science and Technology (LS&T) Program's mission is to develop advanced lasers, optics, materials technologies, and applications to solve problems and create new capabilities of importance to the nation and the Laboratory. A top, near-term priority is to provide technical support in the deployment and upgrade of the National Ignition Facility (NIF). Our other program activities synergistically develop technologies that are of interest to the NIF Directorate but outside the scope of the NIF funding. The primary objectives of LS&T activities in 2002 have been fourfold--(a) to support deployment of hardware and to enhance laser and optics performance for NIF, (b) to develop high-energy petawatt laser science and technology for the Department of Energy (DOE), (c) to develop advanced solid-state laser systems and optical components for the Department of Defense (DoD), and to invent develop, and deliver improved concepts and hardware for other government agencies and industry. Special efforts have been devoted to building and maintaining our capabilities in three technology areas: high-power short-pulse solid-state lasers, high-power optical materials, and applications of advanced lasers. LS&T activities during 2002 focused on seven major areas: (1) NIF Project--LS&T led major advances in the deployment of NIF Final Optics Assembly (FOA) and the development of 3{omega} optics processing and treatment technologies to enhance NIF's operations and performance capabilities. (2) Stockpile Stewardship Program (SSP)--LS&T personnel continued development of ultrashort-pulse lasers and high-power, large-aperture optics for applications in SSP, extreme-field science and national defense. To enhance the high-energy petawatt (HEPW) capability in NIF, LS&T continued development of advanced compressor-grating and front-end laser technologies utilizing optical-parametric chirped-pulse amplification (OPCPA). (3) High-energy-density physics and inertial fusion energy

  5. Integrated modelling in materials and process technology

    DEFF Research Database (Denmark)

    Hattel, Jesper Henri

    2008-01-01

    Integrated modelling of entire process sequences and the subsequent in-service conditions, and multiphysics modelling of the single process steps are areas that increasingly support optimisation of manufactured parts. In the present paper, three different examples of modelling manufacturing...... processes from the viewpoint of combined materials and process modelling are presented: solidification of thin walled ductile cast iron, integrated modelling of spray forming and multiphysics modelling of friction stir welding. The fourth example describes integrated modelling applied to a failure analysis...

  6. Inside Out: Program Integrity and Effectiveness of the Cognitive-Behavioural Program EQUIP for Incarcerated Youth

    NARCIS (Netherlands)

    Helmond, P.E.|info:eu-repo/dai/nl/314405984

    2013-01-01

    In correctional facilities intervention programs are used to reduce behavioral problems and recidivism. Intervention programs can be effective when they contain effective ingredients and are implemented with high levels of program integrity. Program integrity is the degree to which programs are

  7. The NASA Integrated Information Technology Architecture

    Science.gov (United States)

    Baldridge, Tim

    1997-01-01

    This document defines an Information Technology Architecture for the National Aeronautics and Space Administration (NASA), where Information Technology (IT) refers to the hardware, software, standards, protocols and processes that enable the creation, manipulation, storage, organization and sharing of information. An architecture provides an itemization and definition of these IT structures, a view of the relationship of the structures to each other and, most importantly, an accessible view of the whole. It is a fundamental assumption of this document that a useful, interoperable and affordable IT environment is key to the execution of the core NASA scientific and project competencies and business practices. This Architecture represents the highest level system design and guideline for NASA IT related activities and has been created on the authority of the NASA Chief Information Officer (CIO) and will be maintained under the auspices of that office. It addresses all aspects of general purpose, research, administrative and scientific computing and networking throughout the NASA Agency and is applicable to all NASA administrative offices, projects, field centers and remote sites. Through the establishment of five Objectives and six Principles this Architecture provides a blueprint for all NASA IT service providers: civil service, contractor and outsourcer. The most significant of the Objectives and Principles are the commitment to customer-driven IT implementations and the commitment to a simpler, cost-efficient, standards-based, modular IT infrastructure. In order to ensure that the Architecture is presented and defined in the context of the mission, project and business goals of NASA, this Architecture consists of four layers in which each subsequent layer builds on the previous layer. They are: 1) the Business Architecture: the operational functions of the business, or Enterprise, 2) the Systems Architecture: the specific Enterprise activities within the context

  8. Developments of integrity evaluation technology for pressurized components in nuclear power plant and IT based integrity evaluation system

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Jin; Choi, Jae Boong; Shim, Do Jun [Sungkyunkwan Univ., Seoul (Korea, Republic of)] (and others)

    2003-03-15

    The objective of this research is to develop an efficient evaluation technology and to investigate applicability of newly-developed technology, such as internet-based cyber platform, to operating power plants. Development of efficient evaluation systems for Nuclear Power Plant components, based on structural integrity assessment techniques, are increasingly demanded for safe operation with the increasing operating period of Nuclear Power Plants. The following five topics are covered in this project: development of assessment method for wall-thinned nuclear piping based on pipe test; development of structural integrity program for steam generator tubes with cracks of various shape; development of fatigue life evaluation system for mam components of NPP; development of internet-based cyber platform and integrity program for primary components of NPP; effect of aging on strength of dissimilar welds.

  9. Information Technologies and Supply Chain Integration

    DEFF Research Database (Denmark)

    Lemoine, W; Mortensen, Ole

    The goal of the Supply Chain Management process is to create value for customers, stakeholders and all supply chain members, through the integration of different processes like manufacturing flow management, customer service and order fulfillment. However, many firms fail in the path of achieving...... integration. Our results show that the current business integra-tion practices between manufacturers and TLSPs are primarily restricted to some sub-processes in three key SC processes: Customer Service Management, order fulfillment and backwards logistics. The use of IT tools to support the integration has...

  10. Integrating Information Technologies Into Large Organizations

    Science.gov (United States)

    Gottlich, Gretchen; Meyer, John M.; Nelson, Michael L.; Bianco, David J.

    1997-01-01

    NASA Langley Research Center's product is aerospace research information. To this end, Langley uses information technology tools in three distinct ways. First, information technology tools are used in the production of information via computation, analysis, data collection and reduction. Second, information technology tools assist in streamlining business processes, particularly those that are primarily communication based. By applying these information tools to administrative activities, Langley spends fewer resources on managing itself and can allocate more resources for research. Third, Langley uses information technology tools to disseminate its aerospace research information, resulting in faster turn around time from the laboratory to the end-customer.

  11. Science and technology disclosure in the state of Queretaro: Science and Technology for Children program

    Science.gov (United States)

    Contreras Flores, Rubén; Villeda Muñoz, Gabriel

    2007-03-01

    Science and technology disclosure is an integral part of our scientific work as researches; it is an induction process for children, young people and teachers of primary and secondary schools in the state of Queretaro. Education must be offered in a clear and objective way, it allows to the students apply the acquired knowledge to understand the world and improve his quality of life. Nowadays, the Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada of the Instituto Politecnico Nacional Unidad Queretaro (CICATA-IPN Queretaro) together with the Consejo de Ciencia y Tecnologia del Estado de Queretaro (CONCYTEQ) have implemented the "Science and Technology for Children" program (Ciencia y Tecnologia para Ninos - CTN), it allows to the educative sector obtain information through the CONCYTEQ web page. The fist stage of the program was the development of two subjects: the brochure titled "Petroleum, Nonrenewable Natural Resource that Moves the World" and the manual "Experiments of Physics". At the moment we are working with the second stage of the program, it is about the energy generation using renewable sources such as: geothermal, aeolian, solar and biomass. The CTN program allows to students and teachers to create conscience about the importance of the development of the science of technology in our country.

  12. 20 CFR 404.1503a - Program integrity.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Program integrity. 404.1503a Section 404... INSURANCE (1950- ) Determining Disability and Blindness Determinations § 404.1503a Program integrity. We... procedures for reasons bearing on professional competence, professional conduct, or financial integrity; or...

  13. 20 CFR 416.903a - Program integrity.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Program integrity. 416.903a Section 416.903a... DISABLED Determining Disability and Blindness Determinations § 416.903a Program integrity. We will not use... for reasons bearing on professional competence, professional conduct, or financial integrity; or who...

  14. Ten Ways to Incorporate Technology into a TESOL Teacher Preparation Program

    Science.gov (United States)

    Honigsfeld, Andrea; Giouroukakis, Vicky; Cohan, Audrey; Walsh, Maureen

    2009-01-01

    A comprehensive approach for integrating technology into a TESOL teacher preparation program is described. Ten specific ways to assure constructivist technology use in teacher education are highlighted. These techniques have been synthesized into a compact model with three pillars: (a) electronic assessment system (e-portfolios for individual…

  15. Developing Technology Needs Assessments for Educational Programs: An Analysis of Eight Key Indicators

    Science.gov (United States)

    O'Reilly, Erin N.

    2016-01-01

    As access to information and communication technology grows, educators have increasing opportunities to experiment with and to adapt both hardware and software to their current practice. Technology's integration, however, can vary widely between teachers within the same program for numerous reasons. Understanding the challenges practitioners face…

  16. Integrated Magnetic MEMS Relays: Status of the Technology

    Directory of Open Access Journals (Sweden)

    Giuseppe Schiavone

    2014-08-01

    Full Text Available The development and application of magnetic technologies employing microfabricated magnetic structures for the production of switching components has generated enormous interest in the scientific and industrial communities over the last decade. Magnetic actuation offers many benefits when compared to other schemes for microelectromechanical systems (MEMS, including the generation of forces that have higher magnitude and longer range. Magnetic actuation can be achieved using different excitation sources, which create challenges related to the integration with other technologies, such as CMOS (Complementary Metal Oxide Semiconductor, and the requirement to reduce power consumption. Novel designs and technologies are therefore sought to enable the use of magnetic switching architectures in integrated MEMS devices, without incurring excessive energy consumption. This article reviews the status of magnetic MEMS technology and presents devices recently developed by various research groups, with key focuses on integrability and effective power management, in addition to the ability to integrate the technology with other microelectronic fabrication processes.

  17. Technology and Early Childhood Education: A Technology Integration Professional Development Model for Practicing Teachers

    Science.gov (United States)

    Keengwe, Jared; Onchwari, Grace

    2009-01-01

    Despite the promise of technology in education, many practicing teachers are faced with multiple challenges of effectively integrating technology into their classroom instruction. Additionally, teachers who are successful incorporating educational technology into their instruction recognize that although technology tools have the potential to help…

  18. Technology Integration into Teacher Preparation:Part 2—Theory into Practice

    Directory of Open Access Journals (Sweden)

    Mesut DURAN

    2010-12-01

    Full Text Available In Part 1 of a two-part article series, the authors reported on the shortcomings of existing teacher preparation practice concerning technology and teacher education and described the theoretical grounding behind one model for integrating technology intoteacher preparation (Duran & Fossum, 2010. Part 2 here reports on a research project that applied the model at a major university in the U.S. Over a three-year period involving seven cohort groups, 246 educators participated in the study, which combined both quantitative and qualitative data collection and analysis. Findings indicate that over the course of the program, project participants significantly improved their confidence and competence in technology literacy as well as integration of information technology intothe teaching and learning process. The study demonstrates that an approach to professional development that encourages networking, mutual learning, and sharing of strategies and resources among K-16 educators can be effective in improving technology integration in teacher preparation.

  19. An integrated approach towards technology transfer

    NARCIS (Netherlands)

    Wal, L.F. van der; Eldering, C.J.J.; Putten, N.J. van

    2010-01-01

    In 2001 the European Space Agency (ESA), the Dutch Ministry of Economic Affairs and the Netherlands Organisation of applied scientific research TNO initiated the Dutch Technology Transfer Programme (DTTP). Since then, 'technology transfer' has been a relevant part of Dutch space policy. The DTTP aim

  20. Roadblocks to Integrating Technology into Classroom Instruction

    Science.gov (United States)

    Knight, Courteney Lester

    2012-01-01

    Although research has concluded that technology can enhance the teaching and learning processes, teachers have not yet fully adopted technology to support their teaching methodologies. In the last decade or so, as the accessible gap narrowed, the focus switched to other factors. This study attempts to answer the question: Why teachers do not fully…

  1. Roadblocks to Integrating Technology into Classroom Instruction

    Science.gov (United States)

    Knight, Courteney Lester

    2012-01-01

    Although research has concluded that technology can enhance the teaching and learning processes, teachers have not yet fully adopted technology to support their teaching methodologies. In the last decade or so, as the accessible gap narrowed, the focus switched to other factors. This study attempts to answer the question: Why teachers do not fully…

  2. Integrating Digital Technologies in Teaching Learning Process

    Science.gov (United States)

    Nagarajan, R.; Velmanirajan, K.; Kanna, K. Sankesh

    2013-01-01

    India has made impressive strides in the application of information and communication technology in recent years and this has reflected in a vibrant and fast growing economy. It is now an acknowledged world leader in the knowledge industry. In this paper an attempt is made to highlight the role of Information and Communication Technology (ICT) in…

  3. An integrated approach towards technology transfer

    NARCIS (Netherlands)

    Wal, L.F. van der; Eldering, C.J.J.; Putten, N.J. van

    2010-01-01

    In 2001 the European Space Agency (ESA), the Dutch Ministry of Economic Affairs and the Netherlands Organisation of applied scientific research TNO initiated the Dutch Technology Transfer Programme (DTTP). Since then, 'technology transfer' has been a relevant part of Dutch space policy. The DTTP aim

  4. Whales and Hermit Crabs: Integrated Programming and Science.

    Science.gov (United States)

    Kataoka, Joy C.; Lock, Robin

    1995-01-01

    This article describes an integrated program in marine biology. The program was implemented in a nongraded inclusive setting with second- to fourth-grade students whose abilities ranged from gifted to learning disabled. The program integrated science, art, music, language arts, and research and computer skills. (DB)

  5. Human Research Program Integrated Research Plan. Revision C

    Science.gov (United States)

    Steinberg, Susan

    2011-01-01

    Crew health and performance are critical to successful human exploration beyond low Earth orbit. The Human Research Program (HRP) is essential to enabling extended periods of space exploration because it provides knowledge and tools to mitigate risks to human health and performance. Risks include physiological effects from radiation and hypogravity environments, as well as unique challenges in medical support, human factors, and behavioral or psychological factors. The Human Research Program (HRP) delivers human health and performance countermeasures, knowledge, technologies and tools to enable safe, reliable, and productive human space exploration. Without HRP results, NASA will face unknown and unacceptable risks for mission success and post-mission crew health. This Integrated Research Plan (IRP) describes (1) HRP's approach and research activities that are intended to address the needs of human space exploration and serve HRP customers and (2) the method of integration for risk mitigation. The scope of the IRP is limited to the activities that can be conducted with the resources available to the HRP; it does not contain activities that would be performed if additional resources were available. The timescale of human space exploration is envisioned to take many decades. The IRP illustrates the program s research plan through the timescale of early lunar missions of extended duration.

  6. 2012 DOE Vehicle Technologies Program Annual Merit Review

    Energy Technology Data Exchange (ETDEWEB)

    None

    2012-10-26

    The 2012 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting was held May 14-18, 2012 in Crystal City, Virginia. The review encompassed all of the work done by the Hydrogen Program and the Vehicle Technologies Program: a total of 309 individual activities were reviewed for Vehicle Technologies, by a total of 189 reviewers. A total of 1,473 individual review responses were received for the technical reviews.

  7. Ten Items of Integrated Technology Developed by CNPC

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ The technological work of China National Petroleum Corporation (CNPC) was based on the company's general development strategy to become a multinational giant with international competitiveness during the 10th FiveYear Plan Period (2001-2005). The technological efforts were focused on strengthening strategic management of technology to identify the technological development targets, optimizing allocation of technological resources and increasing technological investment to highlight creation of key technology. Aiming at the important and key technologies needed for main business development,CNPC launched 15 technological projects at the State level with a 100 percent completion rate and 379 other projects at the corporate level with a 92.8 percent completion rate. With a number of high-level results achieved, CNPC has developed 10 items of integrated technology.

  8. DEACTIVATION AND DECOMMISSIONING (D AND D) TECHNOLOGY INTEGRATION

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian, Ph.D.

    1999-01-01

    As part of the ongoing task of making Deactivation and Decommissioning (D&D) operations more efficient, this subtask has addressed the need to integrate existing characterization technologies with decontamination technologies in order to provide real-time data on the progress of contamination removal. Specifically, technologies associated with concrete decontamination and/or removal have been examined with the goal of integrating existing technologies and commercializing the resulting hybrid. The Department of Energy (DOE) has estimated that 23 million cubic meters of concrete will require disposition as 1200 buildings undergo the D&D process. All concrete removal to be performed will also necessitate extensive use of characterization techniques. The in-process characterization presents the most potential for improvement and cost-savings as compared to other types. Current methods for in-process characterization usually require cessation of work to allow for radiation surveys to assess the rate of decontamination. Combining together decontamination and characterization technologies would allow for in-process evaluation of decontamination efforts. Since the present methods do not use in-process evaluations for the progress of decontamination, they may allow for ''overremoval'' of materials (removal of contaminated along with non-contaminated materials). Overremoval increases the volume of waste and therefore the costs associated with disposal. Integrating technologies would facilitate the removal of only contaminated concrete and reduce the total volume of radioactive waste, which would be disposed of. This would eventually ensure better productivity and time savings. This project presents a general procedure to integrate the above-mentioned technologies in the form of the Technology Integration Module (TIM) along with combination lists of commercially available decontamination and characterization technologies. The scope of the project has also

  9. Educational technologies designed to promote cardiovascular health in adults: integrative review

    Directory of Open Access Journals (Sweden)

    Ana Célia Caetano de Souza

    2014-10-01

    Full Text Available Objective Investigating the educational technologies developed for promoting cardiovascular health in adults. Method Integrative review carried out in the databases of PubMed, SciELO and LILACS, with 15 articles selected. Results Over half (60% of the studies were randomized clinical trials. The developed educational technologies were programs involving three strategies, with duration of one year, use of playful technologies with storytelling, computer programs or software for smartphones, and electronic brochure. These technologies resulted in reduction of blood pressure, weight, waist circumference, decreased hospitalizations and increased years of life. Conclusion The studies with better impact on the cardiovascular health of adults were those who brought the technology in the form of program and duration of one year.

  10. Information Technologies and Supply Chain Integration

    DEFF Research Database (Denmark)

    Lemoine, W; Mortensen, Ole

    The goal of the Supply Chain Management process is to create value for customers, stakeholders and all supply chain members, through the integration of different processes like manufacturing flow management, customer service and order fulfillment. However, many firms fail in the path of achieving...... integration. This study illustrates, from an empirical point of view, the problems associ-ated to SC integration among European firms operating in global/international markets. The focus is on the relationship between two echelons in the supply chain: manufacturers and their transport and logistics service...

  11. Physics of the Cosmos Program Annual Technology Report

    Science.gov (United States)

    Pham, Bruce Thai; Cardiff, Ann H.

    2015-01-01

    What's in this Report? What's New? This fifth Program Annual Technology Report (PATR) summarizes the Programs technology development activities for fiscal year (FY) 2015. The PATR serves four purposes.1. Summarize the technology gaps identified by the astrophysics community;2. Present the results of this years technology gap prioritization by the PCOS Technology Management Board (TMB);3. Report on newly funded PCOS Strategic Astrophysics Technology (SAT) projects; and4. Detail progress, current status, and activities planned for the coming year for all technologies supported by PCOS Supporting Research and Technology (SRT) funding in FY 2015. .

  12. Computer technology and computer programming research and strategies

    CERN Document Server

    Antonakos, James L

    2011-01-01

    Covering a broad range of new topics in computer technology and programming, this volume discusses encryption techniques, SQL generation, Web 2.0 technologies, and visual sensor networks. It also examines reconfigurable computing, video streaming, animation techniques, and more. Readers will learn about an educational tool and game to help students learn computer programming. The book also explores a new medical technology paradigm centered on wireless technology and cloud computing designed to overcome the problems of increasing health technology costs.

  13. Integration of e-Management, e-Development and e-Learning Technologies for Blended Course Delivery

    Science.gov (United States)

    Johnson, Lynn E.; Tang, Michael

    2005-01-01

    This paper describes and assesses a pre-engineering curriculum development project called Foundations of Engineering, Science and Technology (FEST). FEST integrates web-based technologies into an inter-connected system to enable delivery of a blended program at multiple institutions. Tools and systems described include 1) technologies to deliver…

  14. Information and Communication Technology (Ict) Integration Into ...

    African Journals Online (AJOL)

    problems faced by STEM include lack of qualified teachers, curriculum, the misconception that STEM education is ... of cultural differences. ... integration, quality students learning and staff ... Language influences greatly what we learn. 4.

  15. Relevance of integrating Information Communication Technology ...

    African Journals Online (AJOL)

    ... Communication Technology (ICT) into programmes of teacher formation in Nigerian ... The paper defined ICT in pedagogical context and so established its ... tool need to be reduced significantly or eliminated for effective teacher formation.

  16. A multiaspect program integrity assessment of the cognitive-behavioral program EQUIP for incarcerated offenders

    NARCIS (Netherlands)

    Helmond, P.; Overbeek, G.; Brugman, D.

    2014-01-01

    Studies on the effectiveness of correctional treatment have widely failed to assess program integrity. This study examined the program integrity of EQUIP in 34 treatment groups of incarcerated offenders, using a new multiaspect program integrity instrument (MIPIE). The first aim of our study was to

  17. A multiaspect program integrity assessment of the cognitive-behavioral program EQUIP for incarcerated offenders

    NARCIS (Netherlands)

    Helmond, P.; Overbeek, G.; Brugman, D.

    2014-01-01

    Studies on the effectiveness of correctional treatment have widely failed to assess program integrity. This study examined the program integrity of EQUIP in 34 treatment groups of incarcerated offenders, using a new multiaspect program integrity instrument (MIPIE). The first aim of our study was to

  18. Miniature Sensor Technology Integration (MSTI) Flight Test Results

    OpenAIRE

    Erickson, David; Feig, Jason; Grigsby, Ed; Carlson, Alan

    1994-01-01

    The MSTI-2 satellite mission is the second in a series established to test, in realistic scenarios, miniature spacecraft and sensor technologies for missile detection and tracking on low cost, low-earth orbit technology demonstration satellites. Cooperative demonstrations are planned to combine MSTI-provided target track file information, with interceptor technology tests, to fully demonstrate technologies associated with theater missile defense (TMO) targeting. The program is sponsored by th...

  19. Status of the Third Miniature Sensor Technology Integration Satellite Mission

    OpenAIRE

    Barnhart, David; Hurtz, Rick; McClelland, Jim; Cellarius, Mark; Meyers, AI

    1994-01-01

    The MSTI-3 satellite is the third in a series established to test, in realistic scenarios, miniature spacecraft and sensor technologies for missile detection and tracking on low-cost, low-earth orbit technology demonstration satellites. Cooperative demonstrations are planned to combine MSTI-provided target track file information, with interceptor technology tests, to fully demonstrate technologies associated with theater missile defense (TMO) targeting. The program is sponsored by the Ballist...

  20. Integration technology research on marine geographical information system

    Institute of Scientific and Technical Information of China (English)

    XUE Cunjin; SU Fenzhen; DU Yunyan; YANG Xiaomei

    2008-01-01

    It is urgent and necessary to integrate a marine geographical information system (MGIS) with marine remote sensing detection modules.On the basis of the current technology and features of applications,an open three-layer integration framework is de-signed.At the data layer,a two-level three-base integration mechanism based on the plug-in technology is applied;At the func-tion layer,an integration mode based on API,DLL,EXE and COM is discussed;and at the application layer,a sharing mecha-nism based on the clients/service is adopted.As an example,the remote sensing integrated application information system of Chinas coastal zone and offshore (MaXplorer1.0) with multiecology remote sensing fusion and assimilation module,surge detec-tion module as well as eight other thematic application modules is integrated,and the key technology of integration is discussed at different layers and in different modules.The result shows that it is possible to realize the conformity of technology and resources and to provide the incorporate technology platform for marine information operational functioning after applying the integration framework.

  1. The Communications Technology Satellite /CTS/ Program

    Science.gov (United States)

    Evans, W. M.; Davies, N. G.; Hawersaat, W. H.

    1976-01-01

    The purposes of the joint Canadian-U.S. Communications Technology Satellite (CTS) Program are (1) to conduct satellite communication systems experiments using the 12- and 14-GHz bands and low-cost transportable ground terminals, (2) to develop and flight test a power amplifier tube having a greater than 50% efficiency with a saturated power output of 200 W at 12 GHz, (3) to develop and flight test a lightweight extendible solar array with an initial power output greater than 1 kW, and (4) to develop and flight test a 3-axis stabilization system to maintain accurate antenna boresight positioning on a spacecraft with flexible appendages. Brief descriptions of these experiments and of the ground facilities are provided.

  2. Software Technology for Adaptable, Reliable Systems (STARS) Technical Program Plan,

    Science.gov (United States)

    1986-08-06

    TPP (8/06186) * SOFTWARE TECHNOLOGY IE c0 FOR r ADAPTABLE, RELIABLE SYSTEMS (STARS) TECHNICAL PROGRAM PLAN 6 AUGUST 1986 DTIC ELECTEri NOV 141986WI...NONE NONE 11. TITLE (Include Security Classification) %. Software Technology for Adaptable, Reliable Systems (STARS) Technical Program Plan 12. PERSONAL...document is the top-level technical program plan for the STARS program. It describes the objectives of the program, the technical approach to achieve

  3. Aerosciences, Aero-Propulsion and Flight Mechanics Technology Development for NASA's Next Generation Launch Technology Program

    Science.gov (United States)

    Cockrell, Charles E., Jr.

    2003-01-01

    The Next Generation Launch Technology (NGLT) program, Vehicle Systems Research and Technology (VSR&T) project is pursuing technology advancements in aerothermodynamics, aeropropulsion and flight mechanics to enable development of future reusable launch vehicle (RLV) systems. The current design trade space includes rocket-propelled, hypersonic airbreathing and hybrid systems in two-stage and single-stage configurations. Aerothermodynamics technologies include experimental and computational databases to evaluate stage separation of two-stage vehicles as well as computational and trajectory simulation tools for this problem. Additionally, advancements in high-fidelity computational tools and measurement techniques are being pursued along with the study of flow physics phenomena, such as boundary-layer transition. Aero-propulsion technology development includes scramjet flowpath development and integration, with a current emphasis on hypervelocity (Mach 10 and above) operation, as well as the study of aero-propulsive interactions and the impact on overall vehicle performance. Flight mechanics technology development is focused on advanced guidance, navigation and control (GN&C) algorithms and adaptive flight control systems for both rocket-propelled and airbreathing vehicles.

  4. Point-of-care technologies: a case for resource integration.

    Science.gov (United States)

    Karuppan, Muthu; Karuppan, Corinne M; Craig, Carolyn

    2009-01-01

    Point-of-care technologies have been heralded as enablers of quality care and efficiency. Fueling this reputation is the assumption that these technologies are seamlessly integrated with electronic medical records. In turn, this assumption leads to caregivers' heightened expectations of the capabilities of point-of-care technologies and, when not met, to their frustration with information systems personnel. The case study presented in this article documents an actual hospital's journey to integration. In doing so, it enumerates the technical challenges faced by the organization in layperson's terms and attempts to educate clinical personnel in the intricacies of integrating new health care technologies with existing systems. The drivers to integration were a primary focus on error reduction and an active collaboration among stakeholders. Individuals became learners outside the boundaries of their professional expertise. This cross-functional approach eventually led to simultaneous quality and efficiency gains.

  5. Concise Review: Organ Engineering: Design, Technology, and Integration

    NARCIS (Netherlands)

    Kaushik, G.; Leijten, J.C.H.; Khademhosseini, A.

    2016-01-01

    Engineering complex tissues and whole organs has the potential to dramatically impact translational medicine in several avenues. Organ engineering is a discipline that integrates biological knowledge of embryological development, anatomy, physiology, and cellular interactions with enabling technolog

  6. Concise Review: Organ Engineering: Design, Technology, and Integration

    NARCIS (Netherlands)

    Kaushik, G.; Leijten, J.C.H.; Khademhosseini, A.

    2017-01-01

    Engineering complex tissues and whole organs has the potential to dramatically impact translational medicine in several avenues. Organ engineering is a discipline that integrates biological knowledge of embryological development, anatomy, physiology, and cellular interactions with enabling technolog

  7. Technology challenges for monolithically integrated waveguide demultiplexers Invited Paper

    Institute of Scientific and Technical Information of China (English)

    Lech Wosinski; Liu Liu; Ning Zhu; Lars Thylen

    2009-01-01

    A short overview of integrated waveguide demultiplexers for different applications in future highly inte- grated optical communication systems is presented. Some fabricated devices based on amorphous silicon nanowire technology are described.

  8. Clean Coal Technology Programs: Completed Projects (Volume 2)

    Energy Technology Data Exchange (ETDEWEB)

    Assistant Secretary for Fossil Energy

    2003-12-01

    Annual report on the Clean Coal Technology Demonstration Program (CCTDP), Power Plant Improvement Initiative (PPII), and Clean Coal Power Initiative (CCPI). The report addresses the roles of the programs, implementation, funding and costs, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

  9. An introduction to InP-based generic integration technology

    Science.gov (United States)

    Smit, Meint; Leijtens, Xaveer; Ambrosius, Huub; Bente, Erwin; van der Tol, Jos; Smalbrugge, Barry; de Vries, Tjibbe; Geluk, Erik-Jan; Bolk, Jeroen; van Veldhoven, Rene; Augustin, Luc; Thijs, Peter; D'Agostino, Domenico; Rabbani, Hadi; Lawniczuk, Katarzyna; Stopinski, Stanislaw; Tahvili, Saeed; Corradi, Antonio; Kleijn, Emil; Dzibrou, Dzmitry; Felicetti, Manuela; Bitincka, Elton; Moskalenko, Valentina; Zhao, Jing; Santos, Rui; Gilardi, Giovanni; Yao, Weiming; Williams, Kevin; Stabile, Patty; Kuindersma, Piet; Pello, Josselin; Bhat, Srivathsa; Jiao, Yuqing; Heiss, Dominik; Roelkens, Gunther; Wale, Mike; Firth, Paul; Soares, Francisco; Grote, Norbert; Schell, Martin; Debregeas, Helene; Achouche, Mohand; Gentner, Jean-Louis; Bakker, Arjen; Korthorst, Twan; Gallagher, Dominic; Dabbs, Andrew; Melloni, Andrea; Morichetti, Francesco; Melati, Daniele; Wonfor, Adrian; Penty, Richard; Broeke, Ronald; Musk, Bob; Robbins, Dave

    2014-06-01

    Photonic integrated circuits (PICs) are considered as the way to make photonic systems or subsystems cheap and ubiquitous. PICs still are several orders of magnitude more expensive than their microelectronic counterparts, which has restricted their application to a few niche markets. Recently, a novel approach in photonic integration is emerging which will reduce the R&D and prototyping costs and the throughput time of PICs by more than an order of magnitude. It will bring the application of PICs that integrate complex and advanced photonic functionality on a single chip within reach for a large number of small and larger companies and initiate a breakthrough in the application of Photonic ICs. The paper explains the concept of generic photonic integration technology using the technology developed by the COBRA research institute of TU Eindhoven as an example, and it describes the current status and prospects of generic InP-based integration technology.

  10. Technology integration issues in a special education school in Turkey

    Directory of Open Access Journals (Sweden)

    Umit Girgin

    2011-03-01

    Full Text Available Technological advances make life easier for many students with disabilities. However, when technology isdiscussed in regard to the persons with disabilities, it usually concerns assistive technology such as hearing aids. Infact, in many contexts, information and communications technology (ICT integration can be more critical thanassistive technologies. This study was conducted in a unique school in Turkey established for children with hearingimpairment. The school uses the oral-communicative approach, emphasizing the use of hearing aids; however, thepotential for educational applications of ICT still needs further study. A research study was undertaken to establishthe opportunities for ICT integration in the classroom. The teachers were asked to complete a questionnaire on theICT integration for the school in order to establish their attitudes towards and uses of ICT in this context

  11. Mobile Technology and CAD Technology Integration in Teaching Architectural Design Process for Producing Creative Product

    Science.gov (United States)

    Bin Hassan, Isham Shah; Ismail, Mohd Arif; Mustafa, Ramlee

    2011-01-01

    The purpose of this research is to examine the effect of integrating the mobile and CAD technology on teaching architectural design process for Malaysian polytechnic architectural students in producing a creative product. The website is set up based on Caroll's minimal theory, while mobile and CAD technology integration is based on Brown and…

  12. Integrated plant information technology design support functionality

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yeon Seung; Kim, Dae Jin [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of); Barber, P. W.; Goland, D. [Atomic Energy Canada Ltd., (Canada)

    1996-06-01

    This technical report was written as a result of Integrated Plant Information System (IPIS) feasibility study on CANDU 9 project which had been carried out from January, 1994 to March, 1994 at AECL (Atomic Energy Canada Limited) in Canada. From 1987, AECL had done endeavour to change engineering work process from paper based work process to computer based work process through CANDU 3 project. Even though AECL had a lot of good results form computerizing the Process Engineering, Instrumentation Control and Electrical Engineering, Mechanical Engineering, Computer Aided Design and Drafting, and Document Management System, but there remains the problem of information isolation and integration. On this feasibility study, IPIS design support functionality guideline was suggested by evaluating current AECL CAE tools, analyzing computer aided engineering task and work flow, investigating request for implementing integrated computer aided engineering and describing Korean request for future CANDU design including CANDU 9. 6 figs. (Author).

  13. Light Water Reactor Sustainability Program: Integrated Program Plan

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2017-05-01

    proliferation and terrorism. The Light Water Reactor Sustainability (LWRS) Program is the primary programmatic activity that addresses Objective 1. This document summarizes the LWRS Program’s plans. For the LWRS Program, sustainability is defined as the ability to maintain safe and economic operation of the existing fleet of nuclear power plants for a longer-than-initially-licensed lifetime. It has two facets with respect to long-term operations: (1) manage the aging of plant systems, structures, and components so that nuclear power plant lifetimes can be extended and the plants can continue to operate safely, efficiently, and economically; and (2) provide science-based solutions to the industry to implement technology to exceed the performance of the current labor-intensive business model.

  14. Integrated rural development programs: a skeptical perspective.

    Science.gov (United States)

    Ruttan, V W

    1975-11-01

    In examining integrated rural development programs the question that arises is why is it possible to identify several relatively successful small-scale or pilot rural development projects yet so difficult to find examples of successful rural development programs. 3 bodies of literature offer some insight into the morphology of rural development projects, programs, and processes: the urban-industrial impact hypothesis; the theory of induced technical change; and the new models of institutional change that deal with institution building and the economics of bureaucratic behavior. The urban-industrial impact hypothesis helps in the clarification of the relationships between the development of rural areas and the development of the total society of which rural areas are a part. It is useful in understanding the spatial dimensions of rural development where rural development efforts are likely to be most successful. Formulation of the hypothesis generated a series of empirical studies designed to test its validity. The effect of these studies has been the development of a rural development model in which the rural community is linked to the urban-industrial economy through a series of market relationships. Both the urban economy's rate of growth and the efficiency of the intersector product and factor markets place significant constraints on the possibilities of rural area development. It is not possible to isolate development processes in the contemporary rural community in a developing society from development processes in the larger society. The induced technical change theory provides a guide as to what must be done to gain access to efficient sources of economic growth, the new resources and incomes that are necessary to sustain rural development. Design of a successful rural development strategy involves a combination of technical and institutional change. The ability of rural areas to respond to the opportunities for economic growth generated by local urban

  15. Light Water Reactor Sustainability Program Integrated Program Plan

    Energy Technology Data Exchange (ETDEWEB)

    George Griffith; Robert Youngblood; Jeremy Busby; Bruce Hallbert; Cathy Barnard; Kathryn McCarthy

    2012-01-01

    Nuclear power has safely, reliably, and economically contributed almost 20% of electrical generation in the United States over the past two decades. It remains the single largest contributor (more than 70%) of non-greenhouse-gas-emitting electric power generation in the United States. Domestic demand for electrical energy is expected to experience a 31% growth from 2009 to 2035. At the same time, most of the currently operating nuclear power plants will begin reaching the end of their initial 20-year extension to their original 40-year operating license for a total of 60 years of operation. Figure E-1 shows projected nuclear energy contribution to the domestic generating capacity. If current operating nuclear power plants do not operate beyond 60 years, the total fraction of generated electrical energy from nuclear power will begin to decline - even with the expected addition of new nuclear generating capacity. The oldest commercial plants in the United States reached their 40th anniversary in 2009. The U.S. Department of Energy Office of Nuclear Energy's Research and Development Roadmap (Nuclear Energy Roadmap) organizes its activities around four objectives that ensure nuclear energy remains a compelling and viable energy option for the United States. The four objectives are as follows: (1) develop technologies and other solutions that can improve the reliability, sustain the safety, and extend the life of the current reactors; (2) develop improvements in the affordability of new reactors to enable nuclear energy to help meet the Administration's energy security and climate change goals; (3) develop sustainable nuclear fuel cycles; and (4) understand and minimize the risks of nuclear proliferation and terrorism. The Light Water Reactor Sustainability (LWRS) Program is the primary programmatic activity that addresses Objective 1. This document summarizes the LWRS Program's plans.

  16. ELE: An Ontology-Based System Integrating Semantic Search and E-Learning Technologies

    Science.gov (United States)

    Barbagallo, A.; Formica, A.

    2017-01-01

    ELSE (E-Learning for the Semantic ECM) is an ontology-based system which integrates semantic search methodologies and e-learning technologies. It has been developed within a project of the CME (Continuing Medical Education) program--ECM (Educazione Continua nella Medicina) for Italian participants. ELSE allows the creation of e-learning courses…

  17. Integrating Augmented Reality Technology to Enhance Children's Learning in Marine Education

    Science.gov (United States)

    Lu, Su-Ju; Liu, Ying-Chieh

    2015-01-01

    Marine education comprises rich and multifaceted issues. Raising general awareness of marine environments and issues demands the development of new learning materials. This study adapts concepts from digital game-based learning to design an innovative marine learning program integrating augmented reality (AR) technology for lower grade primary…

  18. Climbing the Stairs: Pre-Service Social Studies Teachers' Perceptions of Technology Integration

    Science.gov (United States)

    Lipscomb, George B.; Doppen, Frans H.

    2005-01-01

    The setting of this case study was a course within a large university's teacher preparation program entitled "Integrating Technology Into the Social Studies Classroom." Simultaneous with this course, the students in this study also received instruction in effective teaching strategies, social studies methods, and completed two field experiences in…

  19. Integrating Augmented Reality Technology to Enhance Children's Learning in Marine Education

    Science.gov (United States)

    Lu, Su-Ju; Liu, Ying-Chieh

    2015-01-01

    Marine education comprises rich and multifaceted issues. Raising general awareness of marine environments and issues demands the development of new learning materials. This study adapts concepts from digital game-based learning to design an innovative marine learning program integrating augmented reality (AR) technology for lower grade primary…

  20. Integrating the Schoolhouse and the Marketplace: A Preliminary Assessment of the Emerging Role of Electronic Technology.

    Science.gov (United States)

    Molnar, Alex

    This paper focuses on how, by reinforcing and exploiting the emphasis on electronic technologies in school reform, marketers are integrating school children into the advertising and marketing system. The ZapMe! program is a for-profit venture that proposes to derive its profits from activities that link the academic activities of schools and the…

  1. Marketing Technology. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

    Science.gov (United States)

    Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

    This document presents the Ohio Integrated Technical and Academic Competency profile for marketing technology. The profile is to serve as the basis for curriculum development in Ohio's secondary, adult, and postsecondary programs. The profile includes a comprehensive listing of 580 specialty and foundation key indicators for evaluating mastery of…

  2. Integration of Multimedia Courseware into ESP Instruction for Technological Purposes in Higher Technical Education

    Science.gov (United States)

    Tsai, Shu-Chiao

    2012-01-01

    This study reports on integrating ESP (English for specific purposes) multimedia courseware for semiconductor technology into instruction of three different language programs in higher education by using it as a silent partner. It focuses primarily on techniques and tools to motivate retention of under-prepared students in an EFL setting. The…

  3. PLC Multi-Chip Integration Technologies

    Institute of Scientific and Technical Information of China (English)

    Motohaya; Ishii

    2003-01-01

    This paper reviews recent progress on integrated multi-chip modules composed of silica-based planar lightwave circuits (PLCs) with a relatively high core-to-cladding index contrast A. These compact and highly functional modules were fabricated by using the PLC-PLC direct attachment technique.

  4. PLC Multi-Chip Integration Technologies

    Institute of Scientific and Technical Information of China (English)

    Motohaya Ishii

    2003-01-01

    This paper reviews recent progress on integrated multi-chip modules composed of silica-based planarlightwave circuits (PLCs) with a relatively high core-to-cladding index contrast △. These compact and highlyfunctional modules were fabricated by using the PLC-PLC direct attachment technique.

  5. Integrating Technology: Effective Tools for Collaboration.

    Science.gov (United States)

    Glandon, Shan

    This book uses planning forms and examples to help media specialists and teachers focus on ways to effectively and purposefully add technology. The 22 collaborations connect with standards-based education in language arts, math, science, and social studies. Ideas for whole-class projects are also included. Each unit example begins with a completed…

  6. Integrating Educational Technologies into Teacher Education: A Case Study

    Science.gov (United States)

    Rawlins, Peter; Kehrwald, Benjamin

    2014-01-01

    This article is a case study of an integrated, experiential approach to improving pre-service teachers' understanding and use of educational technologies in one New Zealand teacher education programme. The study examines the context, design and implementation of a learning activity which integrated student-centred approaches, experiential…

  7. Application of Wireless Communication Technology in Integrated DNI System

    Institute of Scientific and Technical Information of China (English)

    WANG Gang; WU Bin; ZHANG Min; XIA Xiao-zhen

    2006-01-01

    A communication method of integrated DNC(direct numerical control) system is introduced and a new system based on wireless technology is presented. Advantages of wireless communication are described. The scheme of actual communication system is designed, and the integrated system and its function are introduced.

  8. Ceramic Integration Technologies for Energy and Aerospace Applications

    Science.gov (United States)

    Singh, Mrityunjay; Asthana, Ralph N.

    2007-01-01

    Robust and affordable integration technologies for advanced ceramics are required to improve the performance, reliability, efficiency, and durability of components, devices, and systems based on them in a wide variety of energy, aerospace, and environmental applications. Many thermochemical and thermomechanical factors including joint design, analysis, and optimization must be considered in integration of similar and dissimilar material systems.

  9. Integrating Educational Technologies into Teacher Education: A Case Study

    Science.gov (United States)

    Rawlins, Peter; Kehrwald, Benjamin

    2014-01-01

    This article is a case study of an integrated, experiential approach to improving pre-service teachers' understanding and use of educational technologies in one New Zealand teacher education programme. The study examines the context, design and implementation of a learning activity which integrated student-centred approaches, experiential…

  10. Obstacles for Teachers to Integrate Technology with Instruction

    Science.gov (United States)

    Alenezi, Abdullah

    2017-01-01

    This paper covers type one and two educational obstacles in using technology in the classrooms, and considering those obstacles tries to find the answer to the following overarching research question which can help to gauge some obstacles for the educational technology integration for elementary and high school education: What obstacles do…

  11. Integrated interconnect technologies for 3D nanoelectronic systems

    CERN Document Server

    Bakir, Muhannad S

    2008-01-01

    This cutting-edge book on off-chip technologies puts the hottest breakthroughs in high-density compliant electrical interconnects, nanophotonics, and microfluidics at your fingertips, integrating the full range of mathematics, physics, and technology issues together in a single comprehensive source.

  12. Technology Integration for Instructional Improvement: The Impact of Professional Development

    Science.gov (United States)

    Potter, Stephanie L.; Rockinson-Szapkiw, Amanda J.

    2012-01-01

    Technology purchased for use in the classroom often goes unused. We identify a primary reason for the lack of technology integration as ineffectively developed professional development opportunities for teachers. Then we recommend a sustained, administrative-supported and mentor-supported approach to professional development as an alternative to…

  13. SiON technology for integrated optical sensors

    NARCIS (Netherlands)

    Lambeck, P.V.; Wörhoff, Kerstin; Righini, Giancarlo C.

    2002-01-01

    Silicon oxynitride (SiON)- technology has been widely accepted for realizing integrated optical devices for application in optical telecommunication. Some of the severe requirements put in this field to devices and hence to technology are more relaxed in sensing applications, but other ones pop up i

  14. Research Perspectives and Best Practices in Educational Technology Integration

    Science.gov (United States)

    Keengwe, Jared

    2013-01-01

    With advancements in technology continuing to influence all areas of society, students in current classrooms have a different understanding and perspective of learning than the educational system has been designed to teach. Research Perspectives and Best Practices in Educational Technology Integration highlights the emerging digital age, its…

  15. The Threat of Security: Hindering Technology Integration in the Classroom

    Science.gov (United States)

    Robinson, LeAnne K.; Brown, Abbie; Green, Tim

    2007-01-01

    For the last year the authors have been gathering examples of how perceived "threats of security" are hampering the integration of technology in teaching and learning. They hope that educators will examine both the challenges of increased security demands and ways in which security might enhance, rather than detract from, the use of technology for…

  16. Technology Integration in Curriculum Progress to Meet Knowledge Explosion

    Science.gov (United States)

    Joan, D. R. Robert; Denisia, S. P.; Sheeja, Y.

    2013-01-01

    The integration of technology throughout the curriculum is important to meet the needs of all learners of the 21st century. Technology can assistant teachers with the delivery of lessons and assessing students. It can also provide students with numerous ways to demonstrate their learning, increase engagement in the learning process, and help to…

  17. A Partnership Project: Integrating Computer Technology and Orff-Schulwerk.

    Science.gov (United States)

    Woody, Robert H.; Fredrickson, Julie M.

    2000-01-01

    Describes an alternative approach for general music educators wanting to study new instructional strategies in which a classroom teacher and university educator collaborated to explore the integration of computer technology with Orff-Schulwerk in second- and third-grade music classes. Discusses the project and two of its technology-assisted…

  18. Integrated STEM: A New Primer for Teaching Technology Education

    Science.gov (United States)

    Asunda, Paul A.; Mativo, John

    2017-01-01

    Part One of this article ("Technology and Engineering Teacher," 75(4), December/January, 2016) presented a process that science, math, engineering, and technology teachers could use to collaborate and design integrated STEM courses. A conceptual framework was discussed that could provide a premise that educators interested in delivery of…

  19. 75 FR 34805 - Program Integrity Issues

    Science.gov (United States)

    2010-06-18

    ... Higher Education (TEACH) Grant Program, the Federal Pell Grant Program, and the Academic Competitiveness... student financial aid programs to include TEACH Grants, Federal PLUS Loans, and Direct PLUS Loans...)(i) would not apply if a limited portion of the program includes a practicum, internship, or clinical...

  20. Unsmoothing the Cyborg: Technology and the Body in Integrated Dance

    OpenAIRE

    Margaret M. Quinlan; Bates, Benjamin R.

    2014-01-01

    Contemporary cyborg theory tends to approach the integration of human bodies and technology innovations as if the cyborg were a unified whole. And, because of the potential of the cyborg body to help ameliorate disability, the cyborg has been suggested as a way to restore function to individuals living with disabilities. We investigate the deployment of the cyborg integrated dance company using theoretical concepts provided by Gilles Deleuze. Rather than observing a smoothly integrated whole,...

  1. Integrated CMOS sensor technologies for the CLIC tracker

    CERN Document Server

    AUTHOR|(SzGeCERN)754303

    2017-01-01

    Integrated technologies are attractive candidates for an all silicon tracker at the proposed future multi-TeV linear e+e- collider CLIC. In this context CMOS circuitry on a high resistivity epitaxial layer has been studied using the ALICE Investigator test-chip. Test-beam campaigns have been performed to study the Investigator performance and a Technology Computer Aided Design based simulation chain has been developed to further explore the sensor technology.

  2. Comparison of State-Funded Technology Maturation Programs.

    Energy Technology Data Exchange (ETDEWEB)

    Keller, Elizabeth James Kistin [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Warren, Drake [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hess, Marguerite Evelyn [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-12-01

    This study examines the structure and impact of state-funded technology maturation programs that leverage research institutions for economic development throughout the United States. The lessons learned and practices identified from previous experiences will inform Sandia National Laboratories' Government Relations and Technology Partnerships teams as they participate in near-term discussions about the proposed Technology Readiness Gross Receipts Tax Credit and Program, and continue to shape longer-term program and partnership opportunities. This Page Intentionally Left Blank

  3. An Examination of the Relationship between Principal Technology Leadership and Technology Integration in Urban Schools

    Science.gov (United States)

    Draper, Kathryn L.

    2013-01-01

    The purpose of this exploratory/quantitative descriptive and correlational study was to examine the relationship between principal technology leadership and technology integration in urban schools. The technology activities of principals along with Organizational Health Instrument (OHI) survey outcomes perceived by their faculty were described and…

  4. New technological developments in integral field spectroscopy

    Science.gov (United States)

    Vives, S.; Prieto, E.; Salaun, Y.; Godefroy, P.

    2008-07-01

    Integral Field Spectroscopy (IFS) provides a spectrum simultaneously for each spatial sample of an extended two-dimensional field. Basically, the IFS is located in a telescope focal plane and is composed by an Integral Field Unit (IFU or image slicer) and a spectrograph. The IFU acts as a coupler between the telescope and the spectrograph by reformatting optically a rectangular field into a quasi-continuous pseudo-slit located at the entrance focal plane of the spectrograph. The Integral Field Units (IFUs) are presently limited either by their cost/risk (when manufactured with classical glass polishing techniques) or by their performances (when constituted by metallic components). Recent innovative methods, developed conjointly by LAM (Laboratoire d'Astrophysique de Marseille, France; WinLight Optics (Marseille, France), allow reaching high performances (accurate roughness, sharp edges, surface form, etc.) with standard glass manufactured components while saving costs and time by an order of magnitude compared with classical techniques. Last developments (in term of design and manufacturing) and applications are presented in details in this article.

  5. Managing the Technology Acquisition Integration Paradox at SAP

    DEFF Research Database (Denmark)

    Henningsson, Stefan; Kude, Thomas; Popp, Karl Michael

    2016-01-01

    In this paper, we report on a novel approach developed by SAP AG, the German enterprise software company, for managing the integration of acquisitions of companies to access innovative technologies and related capabilities: the Product Council approach. The value of the Product Council approach...... rests in ensuring critical speed while not compromising accuracy in the integration process. For SAP, the Product Council became a vital component in its technology acquisition capability that allows the company to retain its technological edge in the hypercompetitive software industry....

  6. Managing the Technology Acquisition Integration Paradox at SAP

    DEFF Research Database (Denmark)

    Henningsson, Stefan; Kude, Thomas; Popp, Karl Michael

    2016-01-01

    In this paper, we report on a novel approach developed by SAP AG, the German enterprise software company, for managing the integration of acquisitions of companies to access innovative technologies and related capabilities: the Product Council approach. The value of the Product Council approach...... rests in ensuring critical speed while not compromising accuracy in the integration process. For SAP, the Product Council became a vital component in its technology acquisition capability that allows the company to retain its technological edge in the hypercompetitive software industry....

  7. Research and Development Needs for Building-Integrated Solar Technologies

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2014-01-01

    The Building Technologies Office (BTO) has identified Building Integrated Solar Technologies (BIST) as a potentially valuable piece of the comprehensive pathway to help achieve its goal of reducing energy consumption in residential and commercial buildings by 50% by the year 2030. This report helps to identify the key research and development (R&D) needs that will be required for BIST to make a substantial contribution toward that goal. BIST include technologies for space heating and cooling, water heating, hybrid photovoltaic-thermal systems (PV/T), active solar lighting, and building-integrated photovoltaics (BIPV).

  8. Tank System Integrated Model: A Cryogenic Tank Performance Prediction Program

    Science.gov (United States)

    Bolshinskiy, L. G.; Hedayat, A.; Hastings, L. J.; Sutherlin, S. G.; Schnell, A. R.; Moder, J. P.

    2017-01-01

    Accurate predictions of the thermodynamic state of the cryogenic propellants, pressurization rate, and performance of pressure control techniques in cryogenic tanks are required for development of cryogenic fluid long-duration storage technology and planning for future space exploration missions. This Technical Memorandum (TM) presents the analytical tool, Tank System Integrated Model (TankSIM), which can be used for modeling pressure control and predicting the behavior of cryogenic propellant for long-term storage for future space missions. Utilizing TankSIM, the following processes can be modeled: tank self-pressurization, boiloff, ullage venting, mixing, and condensation on the tank wall. This TM also includes comparisons of TankSIM program predictions with the test data andexamples of multiphase mission calculations.

  9. Integrated Task and Data Parallel Programming

    Science.gov (United States)

    Grimshaw, A. S.

    1998-01-01

    This research investigates the combination of task and data parallel language constructs within a single programming language. There are an number of applications that exhibit properties which would be well served by such an integrated language. Examples include global climate models, aircraft design problems, and multidisciplinary design optimization problems. Our approach incorporates data parallel language constructs into an existing, object oriented, task parallel language. The language will support creation and manipulation of parallel classes and objects of both types (task parallel and data parallel). Ultimately, the language will allow data parallel and task parallel classes to be used either as building blocks or managers of parallel objects of either type, thus allowing the development of single and multi-paradigm parallel applications. 1995 Research Accomplishments In February I presented a paper at Frontiers 1995 describing the design of the data parallel language subset. During the spring I wrote and defended my dissertation proposal. Since that time I have developed a runtime model for the language subset. I have begun implementing the model and hand-coding simple examples which demonstrate the language subset. I have identified an astrophysical fluid flow application which will validate the data parallel language subset. 1996 Research Agenda Milestones for the coming year include implementing a significant portion of the data parallel language subset over the Legion system. Using simple hand-coded methods, I plan to demonstrate (1) concurrent task and data parallel objects and (2) task parallel objects managing both task and data parallel objects. My next steps will focus on constructing a compiler and implementing the fluid flow application with the language. Concurrently, I will conduct a search for a real-world application exhibiting both task and data parallelism within the same program. Additional 1995 Activities During the fall I collaborated

  10. 76 FR 5834 - International Business Machines Corporation, Global Technology Services Business Unit, Integrated...

    Science.gov (United States)

    2011-02-02

    ... Employment and Training Administration International Business Machines Corporation, Global Technology Services Business Unit, Integrated Technology Services, Cost and Expense Team, Payroll, Travel and Mobility... Business Machines Corporation, Global Technology Services Business Unit, Integrated Technology...

  11. Academic Integrity Across Physician Assistant Programs in the United States.

    Science.gov (United States)

    Dereczyk, Amy

    2015-09-01

    The purpose of this study was to describe how academic integrity is addressed in physician assistant (PA) programs across the United States. A descriptive survey was developed dividing questions into 2 groups: demographic information and academic integrity questions. The survey tool was distributed to program directors at all PA programs in the United States that were both fully accredited and provisionally accredited. A total of 171 surveys were distributed with a response of 110 surveys. Most institutions have honor codes in place (86.14%), with most having had an honor code for more than 10 years (62.38%). A notable percentage (25.45%) of program directors believes that academic integrity is a problem at their institution. Overall, 45.45% responded that academic integrity is voiced as an issue by faculty in all disciplines at their institution. Yet, when participants were asked to rate their concern about academic integrity at their program, 49.50% had little or no concern, 30.69% were neutral, and 19.80% reported great or extreme concern about academic integrity within their program. This study provided baseline data on how academic integrity is currently addressed in PA programs. Drawing from this baseline data and the review of the literature, the next step is to develop academic integrity recommendations that PA programs can adopt.

  12. Development of a viable 3D integrated circuit technology

    Institute of Scientific and Technical Information of China (English)

    陈文新; 高秉强

    2001-01-01

    Three_dimensional integrated circuit technology with transistors stacked on top of one another in multi-layer silicon film has always been a vision in the future technology direction. While the idea is simple, the technique to obtain high performance multi-layer transistors is extraordinarily difficult. Not until recently does such technology become feasible. In this paper, the background and various techniques to form three-dimensional circuits will be reviewed. Recent development of a simple and promising technology to achieve three-dimensional integration using Metal-Induced-Lateral-Crystallization will be described. Preliminary results of 3D inverters will also be provided to demonstrate the viability for 3D integration.

  13. Specialization-Specific Course Assessments Integrated for Program Assessment

    Directory of Open Access Journals (Sweden)

    Qurban A. Memon

    2012-01-01

    Full Text Available The program assessment process combines assessments from individual courses to generate final program assessment to match accreditation benchmarks. In developing countries, industrial environment is not diversified to allow graduating engineers to seek jobs in all disciplines or specializations of an engineering program. Hence, it seems necessary to seek evolution of an engineering program assessment for specialized requirements of the industry. This paper describes how specialization-specific courses’ assessments are grouped per requirements and then integrated towards overall program assessment. A software program application is developed to automate this development to reduce assessment work and show equivalently as integration of specialization-specific assessments per outcome per term. The implementation also shows how outcomes are integrated per specialization-specific courses in order to judge the implementation of the program assessment. This effort is expected to help stake holders of the program to judge evolution and quality of specialization tracks vis-à-vis expectations of the local industry.

  14. Advanced ignition and propulsion technology program

    Energy Technology Data Exchange (ETDEWEB)

    Oldenborg, R.; Early, J.; Lester, C.

    1998-11-01

    This is the final report of a three-year, Laboratory Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). Reliable engine re-ignition plays a crucial role in enabling commercial and military aircraft to fly safely at high altitudes. This project addressed research elements critical to the optimization of laser-based igniter. The effort initially involved a collaborative research and development agreement with B.F. Goodrich Aerospace and Laser Fare, Inc. The work involved integrated experiments with theoretical modeling to provide a basic understanding of the chemistry and physics controlling the laser-induced ignition of fuel aerosols produced by turbojet engine injectors. In addition, the authors defined advanced laser igniter configurations that minimize laser packaging size, weight, complexity and power consumption. These innovative ignition concepts were shown to reliably ignite jet fuel aerosols over a broad range of fuel/air mixture and a t fuel temperatures as low as -40 deg F. The demonstrated fuel ignition performance was highly superior to that obtained by the state-of-the-art, laser-spark ignition method utilizing comparable laser energy. The authors also developed a laser-based method that effectively removes optically opaque deposits of fuel hydrocarbon combustion residues from laser window surfaces. Seven patents have been either issued or are pending that resulted from the technology developments within this project.

  15. Application of Computer Integration Technology for Fire Safety Analysis

    Institute of Scientific and Technical Information of China (English)

    SHI Jianyong; LI Yinqing; CHEN Huchuan

    2008-01-01

    With the development of information technology, the fire safety assessment of whole structure or region based on the computer simulation has become a hot topic. However, traditionally, the concemed studies are performed separately for different objectives and difficult to perform an overall evaluation. A new multi-dimensional integration model and methodology for fire safety assessment were presented and two newly developed integrated systems were introduced to demonstrate the function of integration simulation technology in this paper. The first one is the analysis on the fire-resistant behaviors of whole structure under real fire loads. The second one is the study on fire evaluation and emergency rescue of campus based on geography information technology (GIS). Some practical examples are presented to illuminate the advan-tages of computer integration technology on fire safety assessment and emphasize some problems in the simulation. The results show that the multi-dimensional integration model offers a new way and platform for the integrating fire safety assessment of whole structure or region, and the integrated software developed is the useful engineering tools for cost-saving and safe design.

  16. DOE Solar Energy Technologies Program FY 2005 Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    2006-03-01

    The DOE Solar Energy Technologies Program FY 2005 Annual Report chronicles the R&D results of the U.S. Department of Energy Solar Energy Technologies Program for Fiscal Year 2005. In particular, the report describes R&D performed by the Program?s national laboratories (National Renewable Energy Laboratory, Sandia National Laboratories, Oak Ridge National Laboratory, and Brookhaven National Laboratory) and university and industry partners.

  17. Integrating Engineering Design into Technology Education: Georgia's Perspective

    Science.gov (United States)

    Denson, Cameron D.; Kelley, Todd R.; Wicklein, Robert C.

    2009-01-01

    This descriptive research study reported on Georgia's secondary level (grades 6-12) technology education programs capability to incorporate engineering concepts and/or engineering design into their curriculum. Participants were middle school and high school teachers in the state of Georgia who currently teach technology education. Participants…

  18. Experiences of Turkish Student Teachers in Pedagogy and Educational Technology during an Internship Program in the US

    Science.gov (United States)

    Sahin, Ismail; Toy, Serkan

    2009-01-01

    This quantitative research study was conducted to examine technological and pedagogical experiences of Turkish student teachers in a US Department of State sponsored international internship program. The internship program had a specific emphasis on student-centered teaching and technology integration. Turkish interns completed a 6-week teaching…

  19. Evaluation of the Advanced Subsonic Technology Program Noise Reduction Benefits

    Science.gov (United States)

    Golub, Robert A.; Rawls, John W., Jr.; Russell, James W.

    2005-01-01

    This report presents a detailed evaluation of the aircraft noise reduction technology concepts developed during the course of the NASA/FAA Advanced Subsonic Technology (AST) Noise Reduction Program. In 1992, NASA and the FAA initiated a cosponsored, multi-year program with the U.S. aircraft industry focused on achieving significant advances in aircraft noise reduction. The program achieved success through a systematic development and validation of noise reduction technology. Using the NASA Aircraft Noise Prediction Program, the noise reduction benefit of the technologies that reached a NASA technology readiness level of 5 or 6 were applied to each of four classes of aircraft which included a large four engine aircraft, a large twin engine aircraft, a small twin engine aircraft and a business jet. Total aircraft noise reductions resulting from the implementation of the appropriate technologies for each class of aircraft are presented and compared to the AST program goals.

  20. NASA technology utilization program: The small business market

    Science.gov (United States)

    Vannoy, J. K.; Garcia-Otero, F.; Johnson, F. D.; Staskin, E.

    1980-01-01

    Technology transfer programs were studied to determine how they might be more useful to the small business community. The status, needs, and technology use patterns of small firms are reported. Small business problems and failures are considered. Innovation, capitalization, R and D, and market share problems are discussed. Pocket, captive, and new markets are summarized. Small manufacturers and technology acquisition are discussed, covering external and internal sources, and NASA technology. Small business and the technology utilization program are discussed, covering publications and industrial applications centers. Observations and recommendations include small business market development and contracting, and NASA management technology.

  1. MPACVD processing technologies for planar integrated optics

    Science.gov (United States)

    Li, Cheng-Chung; Boudreau, Robert A.; Bowen, Terry P.

    1998-06-01

    Optical circuits based on low-loss glass waveguide are the practical and promising approaches to integrate different functional components for optical communication system. Microwave plasma assisted chemical vapor deposition produces superior quality, low birefringence, low-loss, planar waveguides for integrated optical devices. A microwave plasma initiates the chemical vapor of SiCl4, GeCl4 and oxygen. A Ge-doped silica layer thus deposited on the substrates with reasonable high growth rate. Film properties are based on various parameters, such as chemical flow rates, chamber pressure and temperature, power level and injector design. The main emphasis has been on optimizing the deposition parameters and reproducibility. An uniform, low-loss film can be made by properly balancing the precursor flows. The refractive index of deposited film can also be controlled by adjusting the flow ratio of SiCl4 and GeCl4 bubblers. Deposited films was characterized by prism coupler, loss measurement, residual stress, and composition analysis. The resulted refractive index step can be varied between 1.46 to 1.60. Waveguide can be fabricated with any desired refractive index profile. Standard photolithography defines the waveguide pattern on mask layer. Core layer was remove by the plasma dry etch which has been investigated by both reactive ion etch (RIE) and inductively coupled plasma etch. Etch rate of 3000-4000 angstrom/min has been achieved by using ICP compared to typical etch rate of 200-300 angstrom/min by using conventional RIE.

  2. Light Water Reactor Sustainability Program Integrated Program Plan

    Energy Technology Data Exchange (ETDEWEB)

    Kathryn McCarthy; Jeremy Busby; Bruce Hallbert; Shannon Bragg-Sitton; Curtis Smith; Cathy Barnard

    2013-04-01

    Nuclear power has safely, reliably, and economically contributed almost 20% of electrical generation in the United States over the past two decades. It remains the single largest contributor (more than 70%) of non-greenhouse-gas-emitting electric power generation in the United States. Domestic demand for electrical energy is expected to experience a 31% growth from 2009 to 2035. At the same time, most of the currently operating nuclear power plants will begin reaching the end of their initial 20-year extension to their original 40-year operating license for a total of 60 years of operation. Figure E-1 shows projected nuclear energy contribution to the domestic generating capacity. If current operating nuclear power plants do not operate beyond 60 years, the total fraction of generated electrical energy from nuclear power will begin to decline—even with the expected addition of new nuclear generating capacity. The oldest commercial plants in the United States reached their 40th anniversary in 2009. The U.S. Department of Energy Office of Nuclear Energy’s Research and Development Roadmap (Nuclear Energy Roadmap) organizes its activities around four objectives that ensure nuclear energy remains a compelling and viable energy option for the United States. The four objectives are as follows: (1) develop technologies and other solutions that can improve the reliability, sustain the safety, and extend the life of the current reactors; (2) develop improvements in the affordability of new reactors to enable nuclear energy to help meet the Administration’s energy security and climate change goals; (3) develop sustainable nuclear fuel cycles; and (4) understand and minimize the risks of nuclear proliferation and terrorism. The Light Water Reactor Sustainability (LWRS) Program is the primary programmatic activity that addresses Objective 1. This document summarizes the LWRS Program’s plans.

  3. Light Water Reactor Sustainability Program Integrated Program Plan

    Energy Technology Data Exchange (ETDEWEB)

    McCarthy, Kathryn A. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Busby, Jeremy [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hallbert, Bruce [Idaho National Lab. (INL), Idaho Falls, ID (United States); Bragg-Sitton, Shannon [Idaho National Lab. (INL), Idaho Falls, ID (United States); Smith, Curtis [Idaho National Lab. (INL), Idaho Falls, ID (United States); Barnard, Cathy [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-04-01

    Nuclear power has safely, reliably, and economically contributed almost 20% of electrical generation in the United States over the past two decades. It remains the single largest contributor (more than 70%) of non-greenhouse-gas-emitting electric power generation in the United States. Domestic demand for electrical energy is expected to experience a 31% growth from 2009 to 2035. At the same time, most of the currently operating nuclear power plants will begin reaching the end of their initial 20-year extension to their original 40-year operating license for a total of 60 years of operation. Figure E-1 shows projected nuclear energy contribution to the domestic generating capacity. If current operating nuclear power plants do not operate beyond 60 years, the total fraction of generated electrical energy from nuclear power will begin to decline—even with the expected addition of new nuclear generating capacity. The oldest commercial plants in the United States reached their 40th anniversary in 2009. The U.S. Department of Energy Office of Nuclear Energy’s Research and Development Roadmap (Nuclear Energy Roadmap) organizes its activities around four objectives that ensure nuclear energy remains a compelling and viable energy option for the United States. The four objectives are as follows: (1) develop technologies and other solutions that can improve the reliability, sustain the safety, and extend the life of the current reactors; (2) develop improvements in the affordability of new reactors to enable nuclear energy to help meet the Administration’s energy security and climate change goals; (3) develop sustainable nuclear fuel cycles; and (4) understand and minimize the risks of nuclear proliferation and terrorism. The Light Water Reactor Sustainability (LWRS) Program is the primary programmatic activity that addresses Objective 1. This document summarizes the LWRS Program’s plans.

  4. Advanced Earth-to-orbit propulsion technology program overview: Impact of civil space technology initiative

    Science.gov (United States)

    Stephenson, Frank W., Jr.

    1988-01-01

    The NASA Earth-to-Orbit (ETO) Propulsion Technology Program is dedicated to advancing rocket engine technologies for the development of fully reusable engine systems that will enable space transportation systems to achieve low cost, routine access to space. The program addresses technology advancements in the areas of engine life extension/prediction, performance enhancements, reduced ground operations costs, and in-flight fault tolerant engine operations. The primary objective is to acquire increased knowledge and understanding of rocket engine chemical and physical processes in order to evolve more realistic analytical simulations of engine internal environments, to derive more accurate predictions of steady and unsteady loads, and using improved structural analyses, to more accurately predict component life and performance, and finally to identify and verify more durable advanced design concepts. In addition, efforts were focused on engine diagnostic needs and advances that would allow integrated health monitoring systems to be developed for enhanced maintainability, automated servicing, inspection, and checkout, and ultimately, in-flight fault tolerant engine operations.

  5. Integrated approach for hybrid rocket technology development

    Science.gov (United States)

    Barato, Francesco; Bellomo, Nicolas; Pavarin, Daniele

    2016-11-01

    Hybrid rocket motors tend generally to be simple from a mechanical point of view but difficult to optimize because of their complex and still not well understood cross-coupled physics. This paper addresses the previous issue presenting the integrated approach established at University of Padua to develop hybrid rocket based systems. The methodology tightly combines together system analysis and design, numerical modeling from elementary to sophisticated CFD, and experimental testing done with incremental philosophy. As an example of the approach, the paper presents the experience done in the successful development of a hybrid rocket booster designed for rocket assisted take off operations. It is thought that following the proposed approach and selecting carefully the most promising applications it is possible to finally exploit the major advantages of hybrid rocket motors as safety, simplicity, low cost and reliability.

  6. Integrated Geospatial Education and Technology Training (iGETT) for Workforce Development

    Science.gov (United States)

    Allen, J. E.; Johnson, A.; Headley, R. K.

    2009-12-01

    The increasing availability of no-cost remote sensing data and improvements in analysis software have presented an unprecedented opportunity for the integration of geospatial technologies into a wide variety of disciplines for learning and teaching at community colleges and Tribal colleges. These technologies magnify the effectiveness of problem solving in agriculture, disaster management, environmental sciences, urbanization monitoring, and multiple other domains for societal benefit. This session will demonstrate the approach and lessons learned by federal and private industry partners leading a professional development program, “Integrated Geospatial Education and Technology Training” (iGETT; http://igett.delmar.edu), 2007-2010. iGETT is funded by the National Science Foundation’s Advanced Technological Education Program, (NSF DUE 0703185). 40 participants were selected from a nationwide pool and received training in how to understand, identify, download, and integrate federal land remote sensing data into existing Geographic Information Systems programs to address specific issues of concern to the local workforce. Each participant has authored a “Learning Unit” that covers at least two weeks of class time. All training resources and Learning Units are publicly available on the iGETT Web site. A follow-on project is under consideration to develop core competencies for the remote sensing technician. Authors: Jeannie Allen, Sigma Space Corp. for NASA Landsat, at Goddard Space Flight Center; Ann Johnson, ESRI Higher Education; Rachel Headley, USGS EROS Land Remote Sensing Program

  7. Steps to Implementing Technology in Inclusive Early Childhood Programs

    Science.gov (United States)

    Lyons, Catherine D.; Tredwell, Claire T.

    2015-01-01

    Twenty-first-century preschool children, with and without disabilities, may be found using technology, including assistive technologies, on a daily basis in their homes, schools, and communities. Early childhood educators are exploring opportunities to integrate technology and interactive media into the present-day curriculum. The authors suggest…

  8. Hanford Integrated Planning Process: 1993 Hanford Site-specific science and technology plan

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-01

    This document is the FY 1993 report on Hanford Site-specific science and technology (S&T) needs for cleanup of the Site as developed via the Hanford Integrated Planning Process (HIPP). It identifies cleanup problems that lack demonstrated technology solutions and technologies that require additional development. Recommendations are provided regarding allocation of funding to address Hanford`s highest-priority technology improvement needs, technology development needs, and scientific research needs, all compiled from a Sitewide perspective. In the past, the S&T agenda for Hanford Site cleanup was sometimes driven by scientists and technologists, with minimal input from the ``problem owners`` (i.e., Westinghouse Hanford Company [WHC] staff who are responsible for cleanup activities). At other times, the problem-owners made decisions to proceed with cleanup without adequate scientific and technological inputs. Under both of these scenarios, there was no significant stakeholder involvement in the decision-making process. One of the key objectives of HIPP is to develop an understanding of the integrated S&T requirements to support the cleanup mission, (a) as defined by the needs of the problem owners, the values of the stakeholders, and the technology development expertise that exists at Hanford and elsewhere. This requires a periodic, systematic assessment of these needs and values to appropriately define a comprehensive technology development program and a complementary scientific research program. Basic to our success is a methodology that is defensible from a technical perspective and acceptable to the stakeholders.

  9. Extension Youth Educators' Technology Use in Youth Development Programming

    Science.gov (United States)

    McClure, Carli; Buquoi, Brittany; Kotrlik, Joe W.; Machtmes, Krisanna; Bunch, J. C.

    2014-01-01

    The purpose of this descriptive-correlational study was to determine the use of technology in youth programming by Extension youth development educators in Louisiana, Mississippi, and Tennessee. Data were collected via e-mail and a SurveyMonkey© questionnaire. Extension educators are using some technology in youth development programming. More…

  10. Integrating new Storage Technologies into EOS

    Science.gov (United States)

    Peters, Andreas J.; van der Ster, Dan C.; Rocha, Joaquim; Lensing, Paul

    2015-12-01

    The EOS[1] storage software was designed to cover CERN disk-only storage use cases in the medium-term trading scalability against latency. To cover and prepare for long-term requirements the CERN IT data and storage services group (DSS) is actively conducting R&D and open source contributions to experiment with a next generation storage software based on CEPH[3] and ethernet enabled disk drives. CEPH provides a scale-out object storage system RADOS and additionally various optional high-level services like S3 gateway, RADOS block devices and a POSIX compliant file system CephFS. The acquisition of CEPH by Redhat underlines the promising role of CEPH as the open source storage platform of the future. CERN IT is running a CEPH service in the context of OpenStack on a moderate scale of 1 PB replicated storage. Building a 100+PB storage system based on CEPH will require software and hardware tuning. It is of capital importance to demonstrate the feasibility and possibly iron out bottlenecks and blocking issues beforehand. The main idea behind this R&D is to leverage and contribute to existing building blocks in the CEPH storage stack and implement a few CERN specific requirements in a thin, customisable storage layer. A second research topic is the integration of ethernet enabled disks. This paper introduces various ongoing open source developments, their status and applicability.

  11. Status of NASA's Earth-to-Orbit Propulsion Technology program

    Science.gov (United States)

    Escher, W. J. D.; Moses, J. L.; Gorland, S. H.; Stephenson, F. W.

    1991-01-01

    Earth-to-Orbit Propulsion Technology program is considered. The program's three major technical areas include combustion devices, turbomachinery, and controls and monitoring. Directed toward reducing acquisition and operations risk and cost the ETO program is conducted in two serially-performed categories: technology acquisition and technology validation. The former is constituted of studies, tool building, and bench-scale experimentation. The latter involves next-step verification of the acquisition results and findings, usually leading to a test-bed validated technology 'product'.

  12. The Beamed Energy Technology Working Group, Programs and Goals

    Science.gov (United States)

    Montgomery, Edward E., IV; Smith, W. Scott (Technical Monitor)

    2002-01-01

    A brief description of the Beamed Energy Technology Program will be given. Its relationship to the overall Advanced Technology Program at Marshall Space Flight Center will be discussed. A summary description of the known potential benefits and technical issues remaining in the development of a viable system will be presented along with program plans for a NASA Research Announcement in FY03 to begin development of relevant technologies and systems concepts. The results of workshop activity by the Beamed Energy Technology Working Group will be provided.

  13. A systemic model for differentiating school technology integration

    Directory of Open Access Journals (Sweden)

    Tel Amiel

    2016-07-01

    Full Text Available School technology integration rarely begins with school or educator choice. It is part of a wider context where external and internal factors have direct influence on the goals and tools that are adopted over time. The objective of this study is to investigate the systemic conditions that contribute or inhibit the development of different activities by teachers making use of new media. We compiled a list of well-known conditions for technology integration success and mapped these in the historical and culturally bound perspective of activity theory (cultural historical activity theory. We conducted a multiple case study analysis of four schools, public and private. The results point to unique and distinctive scenarios even when homogeneity would be expected, reinforcing the argument that material conditions do not determine pedagogical outcomes nor do they determine changes in practice. Beyond this, the study proposes a methodology that can help elicit tensions in technology integration, pointing to avenues for school development.

  14. Field Test of Advanced Duct-Sealing Technologies Within the Weatherization Assistance Program

    Energy Technology Data Exchange (ETDEWEB)

    Ternes, MP

    2001-12-05

    A field test of an aerosol-spray duct-sealing technology and a conventional, best-practice approach was performed in 80 homes to determine the efficacy and programmatic needs of the duct-sealing technologies as applied in the U.S. Department of Energy Weatherization Assistance Program. The field test was performed in five states: Iowa, Virginia, Washington, West Virginia, and Wyoming. The study found that, compared with the best-practice approach, the aerosol-spray technology is 50% more effective at sealing duct leaks and can potentially reduce labor time and costs for duct sealing by 70%, or almost 4 crew-hours. Further study to encourage and promote use of the aerosol-spray technology within the Weatherization Assistance Program is recommended. A pilot test of full production weatherization programs using the aerosol-spray technology is recommended to develop approaches for integrating this technology with other energy conservation measures and minimizing impacts on weatherization agency logistics. In order to allow or improve adoption of the aerosol spray technology within the Weatherization Assistance Program, issues must be addressed concerning equipment costs, use of the technology under franchise arrangements with Aeroseal, Inc. (the holders of an exclusive license to use this technology), software used to control the equipment, safety, and training. Application testing of the aerosol-spray technology in mobile homes is also recommended.

  15. Pathways to Commercial Success. Technologies and Products Supported by the Fuel Cell Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2010-08-01

    This report identifies the commercial and near-commercial (emerging) hydrogen and fuel cell technologies and products that resulted from Department of Energy support through the Fuel Cell Technologies Program in the Office of Energy Efficiency and Renewable Energy.

  16. 48 CFR 235.006-70 - Manufacturing Technology Program.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Manufacturing Technology... CONTRACTING 235.006-70 Manufacturing Technology Program. In accordance with 10 U.S.C. 2521(d), for acquisitions under the Manufacturing Technology Program— (a) Award all contracts using competitive...

  17. Computing, Information, and Communications Technology (CICT) Program Overview

    Science.gov (United States)

    VanDalsem, William R.

    2003-01-01

    The Computing, Information and Communications Technology (CICT) Program's goal is to enable NASA's Scientific Research, Space Exploration, and Aerospace Technology Missions with greater mission assurance, for less cost, with increased science return through the development and use of advanced computing, information and communication technologies

  18. Integrating Internationalization in Counseling Psychology Training Programs

    Science.gov (United States)

    Turner-Essel, Laura; Waehler, Charles

    2009-01-01

    Previous scholars have made specific suggestions regarding what counseling psychology training programs can do to help future psychologists become more cross-culturally aware. This article addresses the questions of whether and how U.S. counseling psychology training programs are currently employing these suggestions. Forty-seven American…

  19. On the integration of technology readiness levels at Sandia National Laboratories.

    Energy Technology Data Exchange (ETDEWEB)

    Bailey, Beatriz R.; Mitchell, John Anthony

    2006-09-01

    Integrating technology readiness levels (TRL) into the management of engineering projects is critical to the mitigation of risk and improved customer/supplier communications. TRLs provide a common framework and language with which consistent comparisons of different technologies and approaches can be made. At Sandia National Laboratories, where technologies are developed, integrated and deployed into high consequence systems, the use of TRLs may be transformational. They are technology independent and span the full range of technology development including scientific and applied research, identification of customer requirements, modeling and simulation, identification of environments, testing and integration. With this report, we provide a reference set of definitions for TRLs and a brief history of TRLs at Sandia National Laboratories. We then propose and describe two approaches that may be used to integrate TRLs into the NW SMU business practices. In the first approach, we analyze how TRLs can be integrated within concurrent qualification as documented in TBP-100 [1]. In the second approach we take a look at the product realization process (PRP) as documented in TBP-PRP [2]. Both concurrent qualification and product realization are fundamental to the way weapons engineering work is conducted at this laboratory and the NWC (nuclear weapons complex) as a whole. Given the current structure and definitions laid out in the TBP-100 and TBP-PRP, we believe that integrating TRLs into concurrent qualification (TBP-100) rather than TBP-PRP is optimal. Finally, we note that our charter was to explore and develop ways of integrating TRLs into the NW SMU and therefore we do not significantly cover the development and history of TRLs. This work was executed under the auspices and direction of Sandia's Weapon Engineering Program. Please contact Gerry Sleefe, Deputy Program Director, for further information.

  20. Development of mechanical design technology for integral reactor

    Energy Technology Data Exchange (ETDEWEB)

    Park, Keun Bae; Choi, Suhn; Kim, Kang Soo; Kim, Tae Wan; Jeong, Kyeong Hoon; Lee, Gyu Mahn

    1999-03-01

    While Korean nuclear reactor strategy seems to remain focused on the large capacity power generation, it is expected that demand of small and medium size reactor will arise for multi-purpose application such as small capacity power generation, co-generation and sea water desalination. With this in mind, an integral reactor SMART is under development. Design concepts, system layout and types of equipment of integral reactor are significantly different from those of loop type reactor. Conceptual design development of mechanical structures of integral reactor SMART is completed through the first stage of the project. Efforts were endeavored for the establishment of design basis and evaluation of applicable codes and standards. Design and functional requirements of major structural components were setup, and three dimensional structural modelling of SMART reactor vessel assembly was prepared. Also, maintenance and repair scheme as well as preliminary fabricability evaluation were carried out. Since small integral reactor technology includes sensitive technologies and know-how's, it is hard to achieve systematic and comprehensive technology transfer from nuclear-advanced countries. Thus, it is necessary to develop the related design technology and to verify the adopted methodologies through test and experiments in order to assure the structural integrity of reactor system. (author)

  1. Integrating Robot Task Planning into Off-Line Programming Systems

    DEFF Research Database (Denmark)

    Sun, Hongyan; Kroszynski, Uri

    1988-01-01

    a system architecture for integrated robot task planning. It identifies and describes the components considered necessary for implementation. The focus is on functionality of these elements as well as on the information flow. A pilot implementation of such an integrated system architecture for a robot......The addition of robot task planning in off-line programming systems aims at improving the capability of current state-of-the-art commercially available off-line programming systems, by integrating modeling, task planning, programming and simulation together under one platform. This article proposes...

  2. Bachelor of Science-Engineering Technology Program and Fuel Cell Education Program Concentration

    Energy Technology Data Exchange (ETDEWEB)

    Block, David L. [Florida Solar Energy Center, Cocoa, FL (United States); Sleiti, Ahmad [Univ. of North Carolina, Charlotte, NC (United States)

    2011-09-19

    The Hydrogen and Fuel Cell Technology education project has addressed DOE goals by supplying readily available, objective, technical, and accurate information that is available to students, industry and the public. In addition, the program has supplied educated trainers and training opportunities for the next generation workforce needed for research, development, and demonstration activities in government, industry, and academia. The project has successfully developed courses and associated laboratories, taught the new courses and labs and integrated the HFCT option into the accredited engineering technology and mechanical engineering programs at the University of North Carolina at Charlotte (UNCC). The project has also established ongoing collaborations with the UNCC energy related centers of the Energy Production & Infrastructure Center (EPIC), the NC Motorsports and Automotive Research Center (NCMARC) and the Infrastructure, Design, Environment and Sustainability Center (IDEAS). The results of the project activities are presented as two major areas – (1) course and laboratory development, offerings and delivery, and (2) program recruitment, promotions and collaborations. Over the project period, the primary activity has been the development and offering of 11 HFCT courses and accompanying laboratories. This process has taken three years with the courses first being developed and then offered each year over the timeframe.

  3. Environment, safety, and health information technology systems integration.

    Energy Technology Data Exchange (ETDEWEB)

    Hendrickson, David A.; Bayer, Gregory W.

    2006-02-01

    The ES&H Information Systems department, motivated by the numerous isolated information technology systems under its control, undertook a significant integration effort. This effort was planned and executed over the course of several years and parts of it still continue today. The effect was to help move the ES&H Information Systems department toward integration with the corporate Information Solutions and Services center.

  4. DOE Solar Energy Technologies Program FY 2006 Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    2007-07-01

    The DOE Solar Energy Technologies Program FY 2006 Annual Report chronicles the R&D results of the U.S. Department of Energy Solar Energy Technologies Program for Fiscal Year 2005. In particular, the report describes R&D performed by the Program's national laboratories (National Renewable Energy Laboratory, Sandia National Laboratories, Oak Ridge National Laboratory, and Brookhaven National Laboratory) and university and industry partners.

  5. DOE Solar Energy Technologies Program 2007 Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    2008-07-01

    The DOE Solar Energy Technologies Program FY 2007 Annual Report chronicles the R&D results of the U.S. Department of Energy Solar Energy Technologies Program from October 2006 to September 2007. In particular, the report describes R&D performed by the Program's national laboratories (National Renewable Energy Laboratory, Sandia National Laboratories, Oak Ridge National Laboratory, and Brookhaven National Laboratory) and university and industry partners.

  6. DOE Solar Energy Technologies Program: FY 2004 Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    2005-10-01

    The DOE Solar Energy Technologies Program FY 2004 Annual Report chronicles the R&D results of the U.S. Department of Energy Solar Energy Technologies Program for Fiscal Year 2004. In particular, the report describes R&D performed by the Program's national laboratories (National Renewable Energy Laboratory, Sandia National Laboratories, Oak Ridge National Laboratory, and Brookhaven National Laboratory) and university and industry partners.

  7. New technologies and surgical innovation: five years of a local health technology assessment program in a surgical department.

    Science.gov (United States)

    Poulin, Paule; Austen, Lea; Kortbeek, John B; Lafrenière, René

    2012-06-01

    There is pressure for surgical departments to introduce new and innovative health technologies in an evidence-based manner while ensuring that they are safe and effective and can be managed with available resources. A local health technology assessment (HTA) program was developed to systematically integrate research evidence with local operational management information and to make recommendations for subsequent decision by the departmental executive committee about whether and under what conditions the technology will be used. The authors present a retrospective analysis of the outcomes of this program as used by the Department of Surgery & Surgical Services in the Calgary Health Region over a 5-year period from December 2005 to December 2010. Of the 68 technologies requested, 15 applications were incomplete and dropped, 12 were approved, 3 were approved for a single case on an urgent/emergent basis, 21 were approved for "clinical audit" for a restricted number of cases with outcomes review, 14 were approved for research use only, and 3 were referred to additional review bodies. Subsequent outcome reports resulted in at least 5 technologies being dropped for failure to perform. Decisions based on local HTA program recommendations were rarely "yes" or "no." Rather, many technologies were given restricted approval with full approval contingent on satisfying certain conditions such as clinical outcomes review, training protocol development, or funding. Thus, innovation could be supported while ensuring safety and effectiveness. This local HTA program can be adapted to a variety of settings and can help bridge the gap between evidence and practice.

  8. Analysis to develop a program for energy-integrated farm systems

    Energy Technology Data Exchange (ETDEWEB)

    Eakin, D.E.; Clark, M.A.; Inaba, L.K.; Johnson, K.I.

    1981-09-01

    A program to use renewable energy resources and possibly develop decentralization of energy systems for agriculture is discussed. The purpose of the research presented is to establish the objective of the program and identify guidelines for program development. The program's objective is determined by: (1) an analysis of the technologies that could be utilized to transform renewable farm resources to energy by the year 2000, (2) the quantity of renewable farm resources that are available, and (3) current energy-use patterns. Individual research, development, and demonstration projects are fit into a national program of energy-integrated farm systems on the basis of: (1) market need, (2) conversion potential, (3) technological opportunities, and (4) acceptability. Quantification of these factors for the purpose of establishing program guidelines is conducted using the following four precepts: (1) market need is identified by current use of energy for agricultural production; (2) conversion potential is determined by the availability of renewable resources; and (3) technological opportunities are determined by the state-of-the-art methods, techniques, and processes that can convert renewable resources into farm energy. Each of these factors is analyzed in Chapters 2 to 4. Chapter 5 draws on the analysis of these factors to establish the objective of the program and identify guidelines for the distribution of program funds. Chapter 6 then discusses the acceptability of integrated farm systems, which can not be quantified like the other factors.

  9. Revisiting Teacher Adoption of Technology: Research Implications and Recommendations for Successful Full Technology Integration

    Science.gov (United States)

    Buckenmeyer, Janet

    2008-01-01

    Most teachers are still failing to fully integrate technologies in their classrooms to improve student achievement. If certain conditions exist, however, they are more likely to accept and use appropriate technologies in significant instructional ways. Relevant professional development and continuous access to needed resources are two significant…

  10. Teachers' Perceptions of the Barriers to Technology Integration and Practices with Technology under Situated Professional Development

    Science.gov (United States)

    Kopcha, Theodore J.

    2012-01-01

    This case study examines 18 elementary school teachers' perceptions of the barriers to technology integration (access, vision, professional development, time, and beliefs) and instructional practices with technology after two years of situated professional development. Months after transitioning from mentoring to teacher-led communities of…

  11. Behind the Scenes: Understanding Teacher Perspectives on Technology Integration in a Suburban District Technology Initiative

    Science.gov (United States)

    Woolard, John

    2012-01-01

    Efforts to prepare students with skills necessary to compete in a 21st Century global, digital economy require technological literacy, but many teachers are inhibited by antiquated models of education and epistemological beliefs that leave them reluctant to integrate educational technologies in their content instruction (Dunn & Rakes, 2010;…

  12. Developing Technological Literacy: A Case Study of Technology Integration in a Latina Liberal Arts College

    Science.gov (United States)

    Razfar, Aria

    2008-01-01

    Over the last 10 years, information technology has been the fastest growing sector in the global economy. Nevertheless, technology and computer-based instruction have not been sufficiently integrated into the curriculum especially at institutions that serve primarily language minority, low income, and first generation, female college populations.…

  13. AGIS: Integration of new technologies used in ATLAS Distributed Computing

    CERN Document Server

    Anisenkov, Alexey; The ATLAS collaboration; Alandes Pradillo, Maria

    2016-01-01

    AGIS is the information system designed to integrate configuration and status information about resources, services and topology of the computing infrastructure used by ATLAS Distributed Computing (ADC) applications and services. In this note, we describe the evolution and the recent developments of AGIS functionalities, related to integration of new technologies recently become widely used in ATLAS Computing like flexible computing utilization of opportunistic Cloud and HPC resources, ObjectStore services integration for Distributed Data Management (Rucio) and ATLAS workload management (PanDA) systems, unified storage protocols declaration required for PandDA Pilot site movers and others.

  14. FY-94 buried waste integrated demonstration program report

    Energy Technology Data Exchange (ETDEWEB)

    1994-11-01

    The Buried Waste Integrated Demonstration (BWID) supports the applied research, development, demonstration, and evaluation of a multitude of advanced technologies. These technologies are being integrated to form a comprehensive remediation system for the effective and efficient remediation of buried waste. These efforts are identified and coordinated in support of the U.S. Department of Energy (DOE), Environmental Restoration and Waste Management (ER/WM) needs and objectives. This document summarizes previous demonstrations and describes the FY-94 BWID technology development and demonstration activities. Sponsored by the DOE Office of Technology Development (OTD), BWID works with universities and private industry to develop these technologies, which are being transferred to the private sector for use nationally and internationally. A public participation policy has been established to provide stakeholders with timely and accurate information and meaningful opportunities for involvement in the technology development and demonstration process.

  15. Fostering Technology-Rich Service-Learning Experiences between School Librarians and Teacher Education Programs

    Science.gov (United States)

    Shepherd, Craig E.; Dousay, Tonia; Kvenild, Cassandra; Meredith, Tamara

    2015-01-01

    School libraries are untapped resources for fieldwork by preservice teachers. Many school librarians have expertise in pedagogy and standards-based curriculum development, both for information literacy and for technology integration. By forging partnerships with teacher-preparation programs, school librarians can provide fieldwork sites rich in…

  16. A Contemporary Preservice Technology Education Program

    Science.gov (United States)

    Flanigan, Rod; Becker, Kurt; Stewardson, Gary

    2012-01-01

    In order to teach engineering education, today's engineering and technology education teachers must be equipped with lesson plans to teach engineering design, among other principles, to the 6th-12th grade levels. At Utah State University (USU), curriculum has been developed for preservice engineering and technology education teachers that…

  17. Teaching Ideas and Activities for Classroom: Integrating Technology into the Pedagogy of Integral Calculus and the Approximation of Definite Integrals

    Science.gov (United States)

    Caglayan, Gunhan

    2016-01-01

    The purpose of this article is to offer teaching ideas in the treatment of the definite integral concept and the Riemann sums in a technology-supported environment. Specifically, the article offers teaching ideas and activities for classroom for the numerical methods of approximating a definite integral via left- and right-hand Riemann sums, along…

  18. Teaching Ideas and Activities for Classroom: Integrating Technology into the Pedagogy of Integral Calculus and the Approximation of Definite Integrals

    Science.gov (United States)

    Caglayan, Gunhan

    2016-01-01

    The purpose of this article is to offer teaching ideas in the treatment of the definite integral concept and the Riemann sums in a technology-supported environment. Specifically, the article offers teaching ideas and activities for classroom for the numerical methods of approximating a definite integral via left- and right-hand Riemann sums, along…

  19. Integration of Information Technologies in Enterprise Application Development

    Directory of Open Access Journals (Sweden)

    Iulia SURUGIU

    2012-05-01

    Full Text Available Healthcare enterprises are disconnected. In the era of integrated information systems and Internet explosion, the necessity of information systems integration reside from business process evolution, on the one hand, and from information technology tendencies, on the other hand. In order to become more efficient and adaptive to change, healthcare organizations are tremendously preoccupied of business process automation, flexibility and complexity. The need of information systems integration arise from these goals, explaining, at the same time, the special interest in EAI. Extensible software integration architectures and business orientation of process modeling and information systems functionalities, the same as open-connectivity, accessibility and virtualization lead to most suitable integration solutions: SOA and BPM architectural styles in a cloud computing environment.

  20. Integration Of Data From Heterogeneous Sources Using Etl Technology.

    Directory of Open Access Journals (Sweden)

    Marek Macura

    2014-01-01

    Full Text Available Data integration is a crucial issue in environments of heterogeneous data sources. At present mentioned heterogeneity is becoming widespread. Whenever, based on various data sources, we want to gain useful information and knowledge we must solve data integration problem in order to apply appropriate analytical methods on comprehensive and uniform data. Such activity is known as knowledge discovery from data process. Therefore approaches to data integration problem are very interesting and bring us closer to the "age of information". The paper presents an architecture, which implements knowledge discovery from data process. The solution combines ETL technology and wrapper layer known from mediated systems. It also provides semantic integration through connections mechanism between data elements. The solution allows for integration of any data sources and implementation of analytical methods in one environment. The proposed environment is verified by applying it to data sources on the foundry industry.

  1. ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) PROGRAM CASE STUDIES: DEMONSTRATING PROGRAM OUTCOMES, VOLUME II

    Science.gov (United States)

    The U.S. Environmental Protection Agency (EPA) Environmental Technology Verification (ETV) Program evaluates the performance of innovative air, water, pollution prevention and monitoring technologies that have the potential to improve human health and the environment. This bookle...

  2. An Integrated Development Environment for Adiabatic Quantum Programming

    Energy Technology Data Exchange (ETDEWEB)

    Humble, Travis S [ORNL; McCaskey, Alex [ORNL; Bennink, Ryan S [ORNL; Billings, Jay Jay [ORNL; D' Azevedo, Eduardo [ORNL; Sullivan, Blair D [ORNL; Klymko, Christine F [ORNL; Seddiqi, Hadayat [ORNL

    2014-01-01

    Adiabatic quantum computing is a promising route to the computational power afforded by quantum information processing. The recent availability of adiabatic hardware raises the question of how well quantum programs perform. Benchmarking behavior is challenging since the multiple steps to synthesize an adiabatic quantum program are highly tunable. We present an adiabatic quantum programming environment called JADE that provides control over all the steps taken during program development. JADE captures the workflow needed to rigorously benchmark performance while also allowing a variety of problem types, programming techniques, and processor configurations. We have also integrated JADE with a quantum simulation engine that enables program profiling using numerical calculation. The computational engine supports plug-ins for simulation methodologies tailored to various metrics and computing resources. We present the design, integration, and deployment of JADE and discuss its use for benchmarking adiabatic quantum programs.

  3. Information flow and work productivity through integrated information technology

    Science.gov (United States)

    Wigand, R. T.

    1985-01-01

    The work environment surrounding integrated office systems is reviewed. The known effects of automated office technologies is synthesized and their known impact on work efficiency is reviewed. These effects are explored with regard to their impact on networks, work flow/processes, as well as organizational structure and power. Particular emphasis is given to structural changes due to the introduction of newer information technologies in organizations. The new information technologies have restructed the average organization's middle banks and, as a consequence, they have shrunk drastically. Organizational pyramids have flattened with fewer levels since executives have realized that they can get ahold of the needed information via the new technologies quicker and directly and do not have to rely on middle-level managers. Power shifts are typically accompanied with the introduction of these technologies resulting in the generation of a new form of organizational power.

  4. Technology Integration in Elementary Classrooms: Teaching Practices of Student Teachers

    Science.gov (United States)

    Liu, Ping

    2016-01-01

    This study examines how and why student teachers integrated technology to enhance instruction in elementary classrooms. The participants were 31 student teachers who completed an assignment of eight weeks. Multiple data sets including observation notes of 347 lessons were obtained from three key groups for data triangulation. Results reveal that…

  5. Computer Technology Integration and Student Learning: Barriers and Promise

    Science.gov (United States)

    Keengwe, Jared; Onchwari, Grace; Wachira, Patrick

    2008-01-01

    Political and institutional support has enabled many institutions of learning to spend millions of dollars to acquire educational computing tools (Ficklen and Muscara, "Am Educ" 25(3):22-29, 2001) that have not been effectively integrated into the curriculum. While access to educational technology tools has remarkably improved in most schools,…

  6. Integrating Physical Activity Data Technologies into Elementary School Classrooms

    Science.gov (United States)

    Lee, Victor R.; Thomas, Jonathan M.

    2011-01-01

    This paper describes an iteration of a design-based research project that involved integrating commercial physical activity data (PAD) sensors, such as heart rate monitors and pedometers, as technologies that could be used in two fifth grade classrooms. By working in partnership with two participating teachers and seeking out immediate resources…

  7. Integrating Webinar and Blogging Technologies into Chemistry Seminar

    Science.gov (United States)

    Hamstra, Dan; Kemsley, Jyllian N.; Murray, Desmond H.; Randall, David W.

    2011-01-01

    We report successfully integrating webinar and blogging into an undergraduate chemistry and biochemistry seminar course. Commercial collaboration software linked speaker-operated slides with two-way voice and video effectively connecting the audience and presenter from different states. Student responses to the technology and seminar content were…

  8. Measuring Information and Communication Technology (ICT) Curriculum Integration

    Science.gov (United States)

    Proctor, Romina M. J.; Watson, Glenice; Finger, Glenn

    2004-01-01

    There is currently a trend toward the development of methodologies to measure Information and Communication Technology (ICT) curriculum integration and its resultant impact on student learning outcomes. Simplistic, negative correlations between numbers of classroom computers and standardized literacy and numeracy test results provide headlines for…

  9. Information Technology Integrated into Classroom Teaching and Its Effects

    Science.gov (United States)

    Yeh, Chao-Chi; Chang, Dian-Fu; Chang, Li-Yun

    2011-01-01

    IT (information technology) has grown in popularity from increased use in different areas in the world. However, school teaching has usually been found to be a little late in following this step. The purpose of this study was to explore the effects of IT when integrated into classroom teaching at primary and secondary schools in Taiwan. The data…

  10. Integrating Technology in a Geometry Classroom: Issues for Teaching.

    Science.gov (United States)

    Pokay, Patricia A.; Tayeh, Carla

    1997-01-01

    Based on a college-level geometry course, presents practical suggestions for integrating exploratory computer applications into the mathematics classroom. Reveals that students need more experimental time with technology to reduce anxiety, and assessments need to be developed and implemented to tap the outcomes of problem solving and higher level…

  11. Proportional control valves integrated in silicon nitride surface channel technology

    NARCIS (Netherlands)

    Groen, Maarten S.; Groenesteijn, Jarno; Meutstege, Esken; Brookhuis, Robert A.; Brouwer, Dannis M.; Lötters, Joost C.; Wiegerink, Remco J.

    2015-01-01

    We have designed and realized two types of proportional microcontrol valves in a silicon nitride surface channel technology process. This enables on-die integration of flow controllers with other surface channel devices, such as pressure sensors or thermal or Coriolis-based (mass) flow sensors, to o

  12. The Factors Influencing Young Children's Social Interaction in Technology Integration

    Science.gov (United States)

    Lim, Eun Mee

    2015-01-01

    When technology integration is accomplished successfully in early childhood education settings, children tend to interact more with one another and exchange information related to computer tasks as well as the overall classroom on-going curriculum themes. Therefore, to explore how young children are interacting in computer areas when using…

  13. Circulator Integrated in Low Temperature Co-fired Ceramics Technology

    NARCIS (Netherlands)

    Dijk, R. van; Bent, G. van der; Ashari, M.; McKay, M.

    2014-01-01

    We present a demonstration of an integrated circulator for TR modules using low temperature co-fired ceramic (LTCC) technology. Two different circulators have been realised to be used in TR modules in two different frequency bands, C-and Ku-band. The circulator is a three-port junction microstrip ty

  14. Integrating Technology for Academic Achievement in Phonics and Fluency

    Science.gov (United States)

    Mason, Hope I.

    2010-01-01

    With the push for teacher accountability and the controversy concerning high-stakes testing, more teachers are looking for systematic ways to increase academic achievement. If the U.S. is to regain its global position as number 1 in the education arena, education policy must dictate that teachers integrate technology as a regular part of core…

  15. Evaluating the Impact of Technology Integration in Teaching and Learning

    Science.gov (United States)

    Adedokun-Shittu, Nafisat Afolake; Shittu, Abdul Jaleel Kehinde

    2014-01-01

    This article reports the impacts of technology integration on teaching and learning from a study that examines the impact of ICT deployment in teaching and learning at a University in Nigeria. The survey data were drawn from 593 respondents (students and lecturers) and the survey instrument employed for both the students and the lecturers is a…

  16. Happily Ever after: Integrating Language and Literature through Technology?

    Science.gov (United States)

    Kraemer, Angelika

    2008-01-01

    This article describes a fourth-year German course on fairy tales that focuses on the integration of academic content with linguistic skills through technology-enhanced course modules. Situated in the discussion of the language-literature gap and the benefits of computer-assisted language learning, the proposed online course modules may prove…

  17. Nuestra Tierra: A University/Public School Technology Integration Project.

    Science.gov (United States)

    Wiburg, Karin M.; Montoya, Nidelia; Sandin, John

    1999-01-01

    Describes a university/public school project to integrate technology with teaching and learning in a Southwest border school district. Discusses how the project was collaboratively designed, implemented, and evaluated by university faculty and school teachers and administrators. Findings demonstrated the potential of university researchers working…

  18. The Technology Reinvestment Project: Integrating Military and Civilian Industries

    Science.gov (United States)

    1993-07-01

    Extension Partnership Program 68 C-4. Department of Energy R&D Budgets by Mission 70 C-5. NASA Research and Development Budget 71 C-6. National Science...significantly the layoffs that will take place over the next few years because of cutbacks in defense spending. The technology programs may, however... layoffs that will take place over the next few years because of cutbacks in defense spending. The defense budget cutbacks proposed by the Clinton

  19. Program Collaboration and Service Integration At-a-Glance

    Centers for Disease Control (CDC) Podcasts

    2010-09-15

    Dr. Kevin A. Fenton, Director of CDC's National Center for HIV/AIDS, Viral Hepatitis, STD, and TB Prevention, discusses program collaboration and service integration, a strategy that promotes better collaboration between public health programs and supports appropriate service integration at the point-of-care.  Created: 9/15/2010 by National Center for HIV/AIDS, Viral Hepatitis, STD, and TB Prevention.   Date Released: 9/15/2010.

  20. Emerging Technologies for Environmental Remediation: Integrating Data and Judgment.

    Science.gov (United States)

    Bates, Matthew E; Grieger, Khara D; Trump, Benjamin D; Keisler, Jeffrey M; Plourde, Kenton J; Linkov, Igor

    2016-01-01

    Emerging technologies present significant challenges to researchers, decision-makers, industry professionals, and other stakeholder groups due to the lack of quantitative risk, benefit, and cost data associated with their use. Multi-criteria decision analysis (MCDA) can support early decisions for emerging technologies when data is too sparse or uncertain for traditional risk assessment. It does this by integrating expert judgment with available quantitative and qualitative inputs across multiple criteria to provide relative technology scores. Here, an MCDA framework provides preliminary insights on the suitability of emerging technologies for environmental remediation by comparing nanotechnology and synthetic biology to conventional remediation methods. Subject matter experts provided judgments regarding the importance of criteria used in the evaluations and scored the technologies with respect to those criteria. The results indicate that synthetic biology may be preferred over nanotechnology and conventional methods for high expected benefits and low deployment costs but that conventional technology may be preferred over emerging technologies for reduced risks and development costs. In the absence of field data regarding the risks, benefits, and costs of emerging technologies, structuring evidence-based expert judgment through a weighted hierarchy of topical questions may be helpful to inform preliminary risk governance and guide emerging technology development and policy.