WorldWideScience

Sample records for technologies institute status

  1. National Advanced Drilling and Excavation Technologies Institute. Status report, March 1997

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, C.

    1997-12-31

    The National Advanced Drilling and Excavation Technologies (NADET) program is intended to pool support, talent, and technologies of the industries dependent upon drilling and excavation technologies to initiate, coordinate, and sustain programs capable of developing substantial technological advances. The NADET Institute has been funded by the DOE Office of Geothermal Technologies and is now supporting seven projects aimed at advanced geothermal drilling technologies. The Institute seeks to broaden its base of funding and technological support from both government and industry sources. Encouraging progress has been made with the support of dues-paying industrial members and industrial sponsorship of a substantial drilling research study.

  2. Legal status of minister's notices and technology standards of 'Korea institute of nuclear safety'(KINS) to regulate nuclear safety

    International Nuclear Information System (INIS)

    Jung, S. K.; Jung, M. M.; Kim, S. W.; Jang, K. H.; Oh, B. J.

    2003-01-01

    Concerning nuclear safety or technology standards, each of 'notices' issued by minister of science and technology(MOST) empowered by law of its regulation is obviously forceful as a law, if not all. But the standards made by the chief of Korea institute of nuclear safety(KINS) to meet the tasks entrusted to KINS by MOST is only conditionally forceful as a law, that is, on the condition that law or regulation empowered the chief of KINS to make nuclear safety and/or technology standards

  3. Institute for safety technology

    International Nuclear Information System (INIS)

    1991-01-01

    In the area of nuclear reactor safety studies, the Institute for Safety Technology (STI) concentrated its efforts in analysing experimentally and numerically phenomena which characterize highly-improbable but very severe accidents either for light water or for sodium cooled reactors. In the STI nuclear isle, three new laboratories for waste (PETRA), fusion (ETHEL) and safeguards, (PERLA) activities are approaching completion and have made substantial progress in their licensing procedure. The Institute started activities in the non-nuclear safety research area only a few years ago and has been able this year to present its first significant experimental and theoretical results in the areas of runaway reactions, accidental release of products and their deflagration/detonation. Concerning Reference Methods for the Evaluation of Structure Reliability a better understanding was gained of the nonlinear cyclic and dynamic behaviour of materials and structures by performing experiments and developing constitutive and structural member models leading to the computer simulation of complete structures

  4. Indian Institute of Technology, Guwahat

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 10; Issue 1. Refresher Course in Experimental Physics – Indian Institute of Technology, ... Information and Announcements Volume 10 Issue 1 January 2005 pp 96-96 ...

  5. Status of fusion technology

    International Nuclear Information System (INIS)

    Mohan, Ashok

    1978-01-01

    The current status of fusion technology is surveyed. Limited reserves of fossil fuel and dangers of proliferation from nuclear reactors have brought into focus the need to develop an optional energy source. Fusion is being looked upon as an optional energy source which is free from environmental hazards unlike fossil fuels and nuclear reactors. Investments in R and D of fusion energy have increased rapidly in USA, Japan, USSR and European countries. Out of the various fusion fuels known, a mixture of D and T is widely chosen. The main problem in fusion technology is the confinement of plasma for a time sufficient to start the fusion reaction. This can be done magnetically or inertially. The three approaches to magnetic confinement are : (1) tokamak, (2) mirror and (3) pinch. Inertial confinement makes use of lasers or electron beams or ion beams. Both the methods of confinement i.e. magnetic and inertial have problems which are identified and their nature is discussed. (M.G.B.)

  6. Status of thorium technology

    International Nuclear Information System (INIS)

    Garg, R.K.; Raghavan, R.V.; Karve, V.M.; Narayandas, G.R.

    1977-01-01

    Although a number of studies have been conducted in various countries to evolve reactor systems based on thorium fuel cycle, its use, so far, is limited to only a few reactors. However, for countries having large reserves of thorium, its utilization is of great significance for their nuclear power programmes. Reasonably assured world resources of thorium in the lower price range have been estimated at more than 500,000 tons of ThO 2 . While most of these resources are in placer deposits in various parts of the world, some vein deposits and uranium ores are other important sources of thorium. Monazite, the most important mineral of thorium, is found in the beach sand deposits along with other heavy minerals like ilmenite, rutile, zircon, and sillimanite etc. Mining of these deposits is usually carried out by suction dredging and separation of monazite from other minerals is effected by a combination of magnetic, electrostatic and gravity separation techniques. Chemical processing of monazite is carried out either by sulphuric acid or caustic treatment, followed by separation of the rare earths and thorium by partial precipitation or leaching. The thorium concentrate is further processed to obtain mantle grade thorium nitrate by chemical purification steps whereas solvent extraction using TBP is adopted for making nuclear-grade material. The purified thorium nitrate is converted to the oxide usually by precipitation as oxalate followed by calcination. The oxide is reduced directly with calcium or converted to the chloride or fluoride and then reduced by calcium or magnesium to obtain thorium metal. Various fuel designs based on the metal or its alloys, mixed oxides or carbides, and dispersed type fuel elements have been developed and accordingly, different fabrication techniques have been employed. Work on irradiation of thorium containing fuel elements and separation of U 233 is being carried out. This paper reviews the status of thorium technology in the world with

  7. Fusion technology status and requirements

    International Nuclear Information System (INIS)

    Thomassen, K.I.

    1982-01-01

    This paper summarizes the status of fusion technology and discusses the requirements to be met in order to build a demonstration fusion plant. Strategies and programmatic considerations in pursuing engineering feasibility are also outlined

  8. Institute for Energy Technology, Annual Report 1981

    International Nuclear Information System (INIS)

    1982-03-01

    The annual report gives a brief account of the activities of Institute for Energy Technology and presents a fairly comprehensive anasis of the budgetary dispositions in 1981 and, for comparison, 1980. (RF)

  9. Massachusetts Institute of Technology / Andres Sevtshuk

    Index Scriptorium Estoniae

    Sevtshuk, Andres, 1981-

    2006-01-01

    A. Sevtshuk oma magistritööst "The Self-aware City / Enesest teadlik linn". Juhendaja William J. Mitchell. Koolist Massachusetts Institute of Technology, selle arhitektuuriosakonnast, arhitektuuri teadusmagistrantuurist

  10. Strategic Planning in Ireland's Institutes of Technology

    Science.gov (United States)

    Elwood, Larry; Rainnie, Al

    2012-01-01

    This article focuses upon Ireland's institute of technology sector, which has been transformed from a 1970s technical orientation to its broader current role of research and higher education provision. The transformational shifts experienced by institutes over the previous three decades have been profound: increased autonomy, new managerial and…

  11. 42 CFR 435.1010 - Definitions relating to institutional status.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Definitions relating to institutional status. 435... § 435.1010 Definitions relating to institutional status. For purposes of FFP, the following definitions... the diagnosis, treatment, or rehabilitation of the mentally retarded or persons with related...

  12. Analysis of technological, institutional and socioeconomic factors ...

    African Journals Online (AJOL)

    Analysis of technological, institutional and socioeconomic factors that influences poor reading culture among secondary school students in Nigeria. ... Proliferation and availability of smart phones, chatting culture and social media were identified as technological factors influencing poor reading culture among secondary ...

  13. Bringing Technology and Meaning into Institutional Work

    DEFF Research Database (Denmark)

    Raviola, Elena; Nörbäck, Maria

    2013-01-01

    In this article we investigate the role of technology and meaning in the institutional work of newsmakers. By analysing ethnographic data from an Italian business newspaper undertaking a project integrating the print and online newsrooms, we show how technology makes certain actions possible...

  14. Libraries in Wisconsin Institutions: Status Report.

    Science.gov (United States)

    Merriam, Elizabeth B.

    The Wisconsin Library Association Round Table of Hospitals and Institutional Librarians became concerned about adequate funding of institutional libraries; the right of institutionalized persons to read and to have educational, legal, and recreational materials; and the development of staff libraries for treatment, rehabilitation, and research…

  15. Institutions, Technological Change and Economic Growth

    Directory of Open Access Journals (Sweden)

    David Corderí Novoa

    2005-01-01

    Full Text Available Theories of economic growth try to explain variations in per capita income across countries by differences in capital accumulation and productivity. However, many scholars consider that integrating institutions into economic theory and economic history is an essential step in improving explanations of why some societies are richer than others. This paper develops the empirical and theoretical case that differences in institutions are the fundamental cause of differences in technological change (productivity, hence in economic growth. First, I give a definition of institutions and how they influence economic performance, from a New Institutional Economics point of view. Then, I introduce the theoretical framework based on the economics of ideas and endogenous growth models. Finally, I argue that R&D expenditures -a proxy for technological change- will vary across countries depending on some measures of institutional quality. In the end, this paper finds that stronger institutions (measured by an aggregate of institutional quality encourage greater R&D expenditures. At a disaggregate level, the rule of law is positively correlated and the regulatory burden is negatively correlated with R&D expenditures. Human capital level (measured by the tertiary and primary school enrolment rates has also a significant positive impact in R&D expenditures.

  16. Technology status: Batteries and fuel cells

    Science.gov (United States)

    Fordyce, J. S.

    1978-01-01

    The current status of research and development programs on batteries and fuel cells and the technology goals being pursued are discussed. Emphasis is placed upon those technologies relevant to earth orbital electric energy storage applications.

  17. Digital technologies in Day-care institutions

    DEFF Research Database (Denmark)

    Schrøder, Vibeke; Søndergaard, Steen

    Digital technologies are gaining an ever increasing access into the activities in Danish and Nordic day-care institutions. The traditional critical viewpoint of technologies as being opposed to the well-being of children is challenged in part by substantial access to digital tools in infant life......, in part by new technologies designed with an intuitive and inviting user interface. In a one-year research project ’Digital tools in day-care-institutions’ (2015) financed by The Danish Agency for Digitisation and The Ministry of Education we have investigated the role of digital technologies in relation...... in performances of dominant cultural ways of acting and thinking. Also, most often the pedagogues’ use of technologies follow the immediate possibilities offered by the technologies. From the videos of these activities it appears that the children follow two tracks of participation. Either the children work...

  18. National financial institutions and technological development

    Energy Technology Data Exchange (ETDEWEB)

    Ramesh, J

    1979-12-01

    The impact of technological policies on non-technological institutions is examined to see what some of the side effects are and how they can serve the needs of the local financial and productive sector. The interrelationships of the national financial systems with government departments, local infrastructure, local private sector, and international financing agencies are examined in the historical context of several development projects. The wrong emphasis is shown to be used by many technological planners, whose first consideration should be to build a loca planning and investment capability and to train local human resources to assume a decision-making role. The neglect seen in India, Brazil, and other countries is traced to the motivation of the industrial enterprises. A more-suitable technological policy could introduce the concepts of loan evaluation on the basis of technological criteria and fiscal incentives. 24 references, 1 figure, 4 tables. (DCK)

  19. Present status of foreign reprocessing technology

    International Nuclear Information System (INIS)

    Otagaki, Takao; Ishikawa, Yasusi; Mori, Jyunichi

    2000-03-01

    In considering extensively and evaluating advanced nuclear fuel recycle technologies then selecting credible one among those technology options and establishing practicable plan of future fast reactor fuel recycle technology, it is important to investigate foreign reprocessing information extensively and minutely as much as possible then to know trends of reprocessing technology development in the world and present technology level of each country. This report is intending to present information of the status and the technology of operating, constructing and closed foreign reprocessing facilities in the world, including, mixed oxide (MOX) fuel reprocessing technology. The conceptual study of 'Foreign Reprocessing Technology Database' was also performed in order to add or revise the information easily. The eight countries, France, The U.K., Russia, The U.S., Germany, Belgium, India and China, were studied regarding outline of the facilities, operation status, future plan, technical information of process flow sheet, primary components, maintenance system etc, construction and operating costs, accidents or troubles, decommissioning status. (author)

  20. Status of radiation-based measurement technology

    International Nuclear Information System (INIS)

    Moon, B. S.; Lee, J. W.; Chung, C. E.; Hong, S. B.; Kim, J. T.; Park, W. M.; Kim, J. Y.

    1999-03-01

    This report describes the status of measurement equipment using radiation source and new technologies in this field. This report includes the development status in Korea together with a brief description of the technology development and application status in ten countries including France, America, and Japan. Also this report describes technical factors related to radiation-based measurement and trends of new technologies. Measurement principles are also described for the equipment that is widely used among radiation-based measurement, such as level measurement, density measurement, basis weight measurement, moisture measurement, and thickness measurement. (author). 7 refs., 2 tabs., 21 figs

  1. Instructional Technology in Brazil: A Status Report

    Science.gov (United States)

    Saettler, Paul

    1973-01-01

    A status report on the evolving conceptions of instructional technology and current applications in Brazil. A complementary purpose is to summarize those conditions which vitally influence the general characteristics of the Brazilian educational system and the nature of instructional technology in this major developing country of the world.…

  2. Fossil energy waste management. Technology status report

    Energy Technology Data Exchange (ETDEWEB)

    Bossart, S.J.; Newman, D.A.

    1995-02-01

    This report describes the current status and recent accomplishments of the Fossil Energy Waste Management (FE WM) projects sponsored by the Morgantown Energy Technology Center (METC) of the US Department of Energy (DOE). The primary goal of the Waste Management Program is to identify and develop optimal strategies to manage solid by-products from advanced coal technologies for the purpose of ensuring the competitiveness of advanced coal technologies as a future energy source. The projects in the Fossil Energy Waste Management Program are divided into three types of activities: Waste Characterization, Disposal Technologies, and Utilization Technologies. This technology status report includes a discussion on barriers to increased use of coal by-products. Also, the major technical and nontechnical challenges currently being addressed by the FE WM program are discussed. A bibliography of 96 citations and a list of project contacts is included if the reader is interested in obtaining additional information about the FE WM program.

  3. Status quo of supply technology

    Energy Technology Data Exchange (ETDEWEB)

    Noda, Shigeo

    1987-09-01

    Problems for gas supply function, activity of the Gas Association, and technological development mainly of the presented subjects are reported. According to the materials released by the Gas Associattion, demands for city gas by the 21st Century is expected to be rather high with 3.6% annual growth rate. It is premissed on an assumption that the superior quality of the city gas satisfying customer requirements would be further upgraded. The problems confronted by the supply function for this purpose are the pursuit for less cost, improvement in security, and stable gas supply. The Gas Association carried out research, investigation, preparation of standards, etc., and published instructive materials such as guide for main and branch piping, guide for supply piping, technical standards for gas related works, etc. It also has been endeavoring to popularize the use of polyethylene pipies, and studying the evaluation method for the renewal and repair of gas conduits and house regulator supply system, etc. The supply function has been working on the cutting dowm of costs, inprovement in security, and developing technologies such as underground probing radar, inteligent pipe locator, identifier for gas and water supply tubes, estimation of ground subsidence, inspection of inside of pipes by a television camera, etc. (1 tab)

  4. Status of Wind Power Technologies

    DEFF Research Database (Denmark)

    Zhao, Haoran; Wu, Qiuwei

    2018-01-01

    With the development of wind turbine technology, wind power will become more controllable and grid‐friendly. It is desirable to make wind farms operate as conventional power plants. Wind turbine generators (WTGs) were mainly used in rural and remote areas for wind power generation. WTG‐based wind...... energy conversion systems (WECS) can be divided into the four main types (type 1‐4). Due to the inherent variability and uncertainty of the wind, the integration of wind power into the grid has brought challenges in several different areas, including power quality, system reliability, stability......, and planning. The impact of each is largely dependent on the level of wind power penetration in the grid. In many countries, relatively high levels of wind power penetration have been achieved. This chapter shows the estimated wind power penetration in leading wind markets....

  5. Status of Irradiation technology development in JMTR

    International Nuclear Information System (INIS)

    Inaba, Y.; Inoue, S.; Izumo, H.; Kitagishi, S.; Tsuchiya, K.; Saito, T.; Ishitsuka, E.

    2008-01-01

    Irradiation Engineering Section of the Neutron Irradiation and Testing Reactor Center was organized to development the new irradiation technology for the application at JMTR re operation. The new irradiation engineering building was remodeled from the old RI development building, and was started to use from the end of September, 2008. Advanced in situ instrumentation technology (high temperature multi paired thermocouple, ceramic sensor, application of optical measurement), 99M o production technology by new Mo solution irradiation method, recycling technology on used beryllium reflector, and so on are planned as the development of new irradiation technologies. The development will be also important for the education and training programs through the development of young generation in not only Japan but also Asian counties. In this report, as the status of the development the new irradiation technology, new irradiation engineering building, high temperature multi paired thermocouple, experiences of optical measurement, recycling technology on used beryllium reflector are introduced

  6. Status of irradiation technology development in JMTR

    International Nuclear Information System (INIS)

    Inaba, Y.; Inoue, S.; Izumo, H.; Kitagishi, S.; Tsuchiya, K.; Saito, T.; Ishitsuka, E.

    2008-01-01

    Irradiation Engineering Section of the Neutron Irradiation and Testing Reactor Centre was organised to development the new irradiation technology for the application at JMTR re-operation. The new irradiation engineering building was remoulded from the old RI development building, and was started to use from the end of September, 2008. Advanced in-situ instrumentation technology(high temperature multi-paired thermocouple, ceramic sensor,application of optical measurement), 99 Mo production technology by new Mo solution irradiation method,recycling technology on used beryllium reflector, and so on are planned as the development of new irradiation technologies. The development will be also important for the education and training programs through the development of young generation in not only Japan but also Asian countries. In this report, as the status of the development the new irradiation technology, new irradiation engineering building, high temperature multi-paired thermocouple, experiences of optical measurement, recycling technology on used beryllium reflector are introduced

  7. Developing an Astronomy Program at the Crownpoint Institute of Technology

    Science.gov (United States)

    Gino, M. C.

    2004-12-01

    The Crownpoint Institute of Technology (CIT) is a tribal college located on the eastern edge of the Navajo Nation in northwestern New Mexico. Historically CIT is a technical college which grants AAS degrees and certificates in a number of vocational and technical fields. CIT is in the process of seeking higher learning articulation and accreditation, and has received "Candidacy Status" from the North Central Association of Colleges and Schools Commission on Institutions of Higher Education. To meet the demands placed upon the college as it steps into its role as an institution of higher learning, CIT is dedicated to broadening its curriculum with programs that encourage math, science and technology, and to increasing the number of courses that advance knowledge in both Navajo and Western society by enhancing both laboratory and educational technologies. The introduction of astronomy into the science curriculum advances CIT's goals in all of these areas, and presents a unique opportunity to incorporate traditional Navajo scientific knowledge into a technically advanced science program. In this poster we outline the development of the astronomy program, which has started with the inclusion of the first astronomy course into the science curriculum and the acquisition of two small telescope systems for K-14 student use and public outreach, and will continue through the construction of a campus observatory capable of supporting an undergraduate research program. It is our expectation that through the introduction of astronomy into the curriculum, CIT will advance its goals of increasing science and technology educational opportunities for its students and training the next generation of Navajo science and technology professionals, while maintaining an awareness of the needs of the Navajo Nation and a sensitivity to Navajo cultural values and protocols.

  8. Spacecraft computer technology at Southwest Research Institute

    Science.gov (United States)

    Shirley, D. J.

    1993-01-01

    Southwest Research Institute (SwRI) has developed and delivered spacecraft computers for a number of different near-Earth-orbit spacecraft including shuttle experiments and SDIO free-flyer experiments. We describe the evolution of the basic SwRI spacecraft computer design from those weighing in at 20 to 25 lb and using 20 to 30 W to newer models weighing less than 5 lb and using only about 5 W, yet delivering twice the processing throughput. Because of their reduced size, weight, and power, these newer designs are especially applicable to planetary instrument requirements. The basis of our design evolution has been the availability of more powerful processor chip sets and the development of higher density packaging technology, coupled with more aggressive design strategies in incorporating high-density FPGA technology and use of high-density memory chips. In addition to reductions in size, weight, and power, the newer designs also address the necessity of survival in the harsh radiation environment of space. Spurred by participation in such programs as MSTI, LACE, RME, Delta 181, Delta Star, and RADARSAT, our designs have evolved in response to program demands to be small, low-powered units, radiation tolerant enough to be suitable for both Earth-orbit microsats and for planetary instruments. Present designs already include MIL-STD-1750 and Multi-Chip Module (MCM) technology with near-term plans to include RISC processors and higher-density MCM's. Long term plans include development of whole-core processors on one or two MCM's.

  9. Technological status of organic photovoltaics (OPV)

    DEFF Research Database (Denmark)

    Carlé, Jon Eggert; Krebs, Frederik C

    2013-01-01

    This paper gives a technological status of organic and polymer photovoltaics (OPV) for both single and tandem junctions. We list the current state-of-the-art at the laboratory level for very small rigid and mostly vacuum processed devices to larger area flexible and printed devices. In comparison...

  10. Fuel Cell Technology Status Analysis | Hydrogen and Fuel Cells | NREL

    Science.gov (United States)

    Technology Status Analysis Fuel Cell Technology Status Analysis Get Involved Fuel cell developers interested in collaborating with NREL on fuel cell technology status analysis should send an email to NREL's Technology Validation Team at techval@nrel.gov. NREL's analysis of fuel cell technology provides objective

  11. Current Status of Concentrator Photovoltaic (CPV) Technology

    Energy Technology Data Exchange (ETDEWEB)

    Philipps, Simon P. [Fraunhofer Inst. for Solar Energy Systems ISE, Freiburg (Germany); Bett, Andreas W. [Fraunhofer Inst. for Solar Energy Systems ISE, Freiburg (Germany); Horowitz, Kelsey [National Renewable Energy Lab. (NREL), Golden, CO (United States); Kurtz, Sarah [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-12-01

    This report summarizes the status of the concentrator photovoltaic (CPV) market and industry as well as current trends in research and technology. This report is intended to guide research agendas for Fraunhofer ISE, the National Renewable Energy Laboratory (NREL), and other R&D organizations. Version 1.1 of this report includes recent progress in CPV. The recent record module efficiency of 38.9% at Concentrator Standard Test Conditions (CSTC) is an impressive result, demonstrating the continuing opportunity for CPV technology to improve. 38.9% at Concentrator Standard Test Conditions (CSTC) is an impressive result, demonstrating the continuing opportunity for CPV technology to improve. 38.9% at Concentrator Standard Test Conditions (CSTC) is an impressive result, demonstrating the continuing opportunity for CPV technology to improve. 38.9% at Concentrator Standard Test Conditions (CSTC) is an impressive result, demonstrating the continuing opportunity for CPV technology to improve.

  12. SOCIAL POLICY AS FACTOR OF STATE INSTITUTIONAL STATUS

    Directory of Open Access Journals (Sweden)

    Larysa Zhukova

    2016-11-01

    Full Text Available The purpose of the article is the research of theoretical and methodological aspects of social policy as the factor of institutional state statuses. Methodology. The researching in institutional providing of state social policy which may be considered as the base for performance of correspond reforms which are directed to the life level increasing, is enough popular task in scientific, theoretical and practical aspects. The scientific search of social policy as the factor of institutional status of state is carried out at the base of classical, neoclassical and institutional methodology. At the base of classical methodology it were defined the general approaches with help of dialectical analysis tools and synthesis of social relations array as historical action. With the help of system, structurally-functional analysis of social policy tasks, it’s opened its internal nature and ways of institutional providing. Institutional and neoclassical approaches allowed the specials analysing tools in modelling of dynamics and institute of social policy institute results in the conditions of market transformations. Also in the research process it were used the economic articles about the question of analysis in state social policy and given the statistic data about the analytical report to the annual President’s of Ukraine message to Verkhovna Rada of Ukraine „About internal and external condition of Ukraine in year 2015”. Research results showed what in the conditions of socially-economic and political instability, the social sphere Ukraine became the hostage of common crisis in economic, catastrophic decreasing of life level, increasing of social confrontation and rough system mistakes in the process of social institution formation. All of this neutralizes the methods efficiency about improvement of socially-economic condition of population and prevents to the implementation of necessary reforms. Practical value lays in the clear definition of

  13. Assessment of technology generating institutions in biotechnology ...

    African Journals Online (AJOL)

    The study was carried out in Southeastern agro-ecological zones of Nigeria. Questionnaire was used to collect data from a sample of forty-three heads of departments from research institutes and universities involved in biotechnology research. Results of the study revealed that some of the institutions have been involved in ...

  14. Institutional Support : Centre for Research and Technology ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    year-old science and technology research centre at Maseno University in western Kenya. The Centre focuses on science and technology research to influence both national policies and development practices at the community level. Currently ...

  15. Institutional Educational Technology Policy and Strategy Documents: An Inequality Gaze

    Science.gov (United States)

    Czerniewicz, Laura; Rother, Kyle

    2018-01-01

    Issues of inequality in higher education have received considerable attention in recent decades, but the intersection of inequality and educational technology at an institutional level has received little attention. This study aims to provide a perspective on institutional educational technology policy informed by current understandings of…

  16. Nuclear Human Resource Development in Tokyo Institute of Technology

    International Nuclear Information System (INIS)

    Satio, Masaki; Igashira, Masayuki; Obara, Toru; Kikura, Hironari; Kawahara, Akira; Ujita, Hiroshi

    2012-01-01

    Nuclear engineering education has been initiated in 1957 at the graduate school of Tokyo Institute of Technology. Higher Educational activities have been conducted for more than half century. More than 1000 Master students and 200 Doctoral students graduated from the Department of Nuclear Engineering in Tokyo Institute if Technology. Many of them are working in nuclear industries and institutes. International course of nuclear engineering was initiated in 1994, and 130 students from 20 overseas countries have graduated from Master and Doctoral Programs. In the present paper, the current nuclear educational activities in Tokyo Institute of Technology are summarized

  17. Status of nuclear technology education in Mongolia

    International Nuclear Information System (INIS)

    Davaa, S.; Khuukhenkhuu, G.

    2007-01-01

    The National University of Mongolia (NUM) is the country's oldest, the only comprehensive university, and a leading center of science, education and culture. The NUM has twelve schools and faculties in the capital city Ulaanbaatar and three branches in provinces. The University offers the widest range of undergraduate and graduate programs in natural and social sciences and humanities. After sixty years of dynamic growth, the University has become a place of sustained innovation, a blend of scholarship and practical realism. The last ten years have been a period of reforms in the structure, financing and governance of Mongolian educational institutions. The NUM has been continuously adjusting its operations and curriculum to deal with new economic conditions, changing labour market demands and altered social aspirations. Committed to human peace, development and welfare in the increasingly globalized world, the NUM promotes equal and mutually beneficial international cooperation. It is a member of the International Association of Universities (IAU), University Mobility in Asia and the Pacific (UMAP), and Euro-Asian University Network (EAUN) and has direct co-operation agreements with more than sixty international academic and research centers in Europe, the USA and the Asia-Pacific Rim. On the threshold of the 21st century, the NUM remains a major center for fundamental and applied research as well as a university that is distinguished by the quality of its teaching. Following its values and traditions, the University strives to be an innovative and dynamic learning community. Requirements for Program Majored in Nuclear Technology: Profession major purpose: The objective is to provide knowledge and skills to use nuclear physics' methodology and nuclear radiation for education, science, health protection, agriculture, geology, mining, nature protection, energy and etc industries. The graduates of this major will become engineer technology staff and researchers in

  18. The Leadership Criterion in Technological Institute

    International Nuclear Information System (INIS)

    Carvalho, Marcelo Souza de; Cussa, Adriana Lourenco d'Avila; Suita, Julio Cezar

    2005-01-01

    This paper introduces the Direction's 'Decision Making Practice'. It has recently been reviewed with the merging of the beddings of the Leadership Criterion (CE-PNQ). These changes improved the control of institutional plans of action which are the result of the global performance critical analysis and other information associated with the Decision Making Practice. (author)

  19. The status of membrane bioreactor technology.

    Science.gov (United States)

    Judd, Simon

    2008-02-01

    In this article, the current status of membrane bioreactor (MBR) technology for wastewater treatment is reviewed. Fundamental facets of the MBR process and membrane and process configurations are outlined and the advantages and disadvantages over conventional suspended growth-based biotreatment are briefly identified. Key process design and operating parameters are defined and their significance explained. The inter-relationships between these parameters are identified and their implications discussed, with particular reference to impacts on membrane surface fouling and channel clogging. In addition, current understanding of membrane surface fouling and identification of candidate foulants is appraised. Although much interest in this technology exists and its penetration of the market will probably increase significantly, there remains a lack of understanding of key process constraints such as membrane channel clogging, and of the science of membrane cleaning.

  20. Assessment of technology generating institutions in biotechnology ...

    African Journals Online (AJOL)

    STORAGESEVER

    2009-05-18

    May 18, 2009 ... biotechnology innovation system of South-Eastern. Nigeria. E. N. Ajani ... technology is the application of indigenous and / or scientific knowledge to ... developing societies, with the exception of China and. Argentina, (James ...

  1. Institutional Support : African Technology Policy Studies - Tanzania ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    African Technology Policy Studies - Tanzania (ATPS-Tanzania) was registered as a national nongovernmental organization in 2001. ... While resource flows to ATPS-Tanzania from ATPS headquarters in Nairobi were reliable, the organization produced a larger volume of research outputs than most other ATPS national ...

  2. Technological capabilities, institutions and firm productivity: a multilevel study

    Czech Academy of Sciences Publication Activity Database

    Goedhuys, M.; Srholec, Martin

    2015-01-01

    Roč. 27, č. 1 (2015), s. 122-139 ISSN 0957-8811 Institutional support: PRVOUK-P23 Keywords : productivity * innovation * technological capability Subject RIV: AH - Economics Impact factor: 0.720, year: 2015

  3. Review of ORNL's MSR technology and status

    International Nuclear Information System (INIS)

    Toth, L.M.; Gat, U.; Del Cul, G.D.; Dai, S.; Williams, D.F.

    1996-01-01

    The current status of molten salt reactor development is discussed with reference to the experience from the Oak Ridge Molten Salt Reactor Experiment. Assessment of the future for this reactor system is reviewed with consideration of both advantages and disadvantages. Application of this concept to ADTT (accelerator driven transmutation technology) needs appears to be feasible by drawing on the MSRE experience. Key chemical considerations remain as: solubility, redox behavior, and chemical activity and their importance to ADTT planning is briefly explained. Priorities in the future development of molten salts for these applications are listed, with the foremost being the acceptance of the 2LiF-BeF 2 solvent system. 8 refs, 2 figs

  4. Status of 2 micron laser technology program

    Science.gov (United States)

    Storm, Mark

    1991-01-01

    The status of 2 micron lasers for windshear detection is described in viewgraph form Theoretical atmospheric and instrument system studies have demonstrated that the 2.1 micron Ho:YAG lasers can effectively measure wind speeds in both wet and dry conditions with accuracies of 1 m/sec. Two micron laser technology looks very promising in the near future, but several technical questions remain. The Ho:YAG laser would be small, compact, and efficient, requiring little or no maintenance. Since the Ho:YAG laser is laser diode pumped and has no moving part, the lifetime of this laser would be directly related to the diode laser lifetimes which can perform in excess of 10,000 hours. Efficiencies of 3 to 12 percent are expected, but laser demonstrations confirming the ability to Q-switch this laser are required. Coherent laser operation has been demonstrated for both the CW and Q-switched lasers.

  5. Biomass electric technologies: Status and future development

    International Nuclear Information System (INIS)

    Bain, R.L.; Overend, R.P.

    1992-01-01

    At the present time, there axe approximately 6 gigawatts (GWe) of biomass-based, grid-connected electrical generation capacity in the United States. This capacity is primarily combustion-driven, steam-turbine technology, with the great majority of the plants of a 5-50 megawatt (MW) size and characterized by heat rates of 14,770-17,935 gigajoules per kilowatt-hour (GJ/kWh) (14,000-17,000 Btu/kWh or 18%-24% efficiency), and with installed capital costs of $1,300-$1,500/kW. Cost of electricity for existing plants is in the $0.065-$O.08/kWh range. Feedstocks are mainly waste materials; wood-fired systems account for 88% of the total biomass capacity, followed by agricultural waste (3%), landfill gas (8%), and anaerobic digesters (1%). A significant amount of remote, non-grid-connected, wood-fired capacity also exists in the paper and wood products industry. This chapter discusses biomass power technology status and presents the strategy for the U.S. Department of Energy (DOE) Biomass Power Program for advancing biomass electric technologies to 18 GWe by the year 2010, and to greater than 100 GWe by the year 2030. Future generation systems will be characterized by process efficiencies in the 35%-40% range, by installed capital costs of $770-$900/kW, by a cost of electricity in the $0.04-$O.05/kWh range, and by the use of dedicated fuel-supply systems. Technology options such as integrated gasification/gas-turbine systems, integrated pyrolysis/gas-turbine systems, and innovative direct-combustion systems are discussed, including present status and potential growth. This chapter also presents discussions of the U.S. utility sector and the role of biomass-based systems within the industry, the potential advantages of biomass in comparison to coal, and the potential environmental impact of biomass-based electricity generation

  6. Power Generation and Transportation Systems Research Department: 1992 annual status report (Gas Research Institute)

    International Nuclear Information System (INIS)

    Benedict, A.

    1992-09-01

    Activities of Gas Research Institute's Power Generation and Transportation Systems subprogram for the period between October 1, 1991 and September 30, 1992 are summarized. The particular project areas covered in the report are Cogeneration and Power Systems, Engine Technology and Component Development, Natural Gas Vehicles Research, and Electric Power Generation. For each project area a separate chapter is provided. Each chapter includes a rationale for funding the research effort, the goals and objectives to be achieved, a general statement on research accomplishments, and the strategy employed in the project area. Each chapter also contains a series of summary reports on the status of each contract

  7. Institute for Energy Technology - Annual report 1997

    International Nuclear Information System (INIS)

    1998-01-01

    Most of the nuclear-related work at Kjeller is based on the JEEP II research reactor, the operation of which is a prerequisite for Kjeller's activities. The work includes basic research in physics, the production of radiopharmaceuticals, the irradiation of materials for various technical applications, neutron radiography, activation analyses and silicon doping. 1997 was the first year of the 1997-1999 research period for the international OECD Halden Reactor Project. With the National Nuclear Regulatory Board (CNEN) of Brazil becoming a member late last year, the Project now include organizations from 20 countries. A membership agreement was also signed with the Institut de Protection et de Surete Nucleaire (IPSN) of France in 1997. The Project is operation by a staff of 280. In the fuel safety area, work focused chiefly on concerns arising at high burn-up in normal operation and in transient conditions. The unique Halden instrumentation has been extremely valuable for obtaining high relevance data. In respect of core materials, work has concentrated on corrosion issues, including in-core measurements of crack propagation rates in stainless steels. These data are used to estimate the expected lifetime of materials and to learn how effective measures are in improving the materials's performance. In the man-machine are the Halden Man-Machine Laboratory (HAMMLAB) is being upgraded and expanded. Modern, powerful simulators for PWR, BWR and WER reactors began to be installed during the year, and a Virtua Reality centre was set up to complement the HAMMLAB. As the infrastructure was build up, activities dwelt on human factors studies, encompassing situation awareness, the development and assessment of operator support systems, and the validation of software

  8. Institute for Energy Technology - Annual report 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    Most of the nuclear-related work at Kjeller is based on the JEEP II research reactor, the operation of which is a prerequisite for Kjeller`s activities. The work includes basic research in physics, the production of radiopharmaceuticals, the irradiation of materials for various technical applications, neutron radiography, activation analyses and silicon doping. 1997 was the first year of the 1997-1999 research period for the international OECD Halden Reactor Project. With the National Nuclear Regulatory Board (CNEN) of Brazil becoming a member late last year, the Project now include organizations from 20 countries. A membership agreement was also signed with the Institut de Protection et de Surete Nucleaire (IPSN) of France in 1997. The Project is operation by a staff of 280. In the fuel safety area, work focused chiefly on concerns arising at high burn-up in normal operation and in transient conditions. The unique Halden instrumentation has been extremely valuable for obtaining high relevance data. In respect of core materials, work has concentrated on corrosion issues, including in-core measurements of crack propagation rates in stainless steels. These data are used to estimate the expected lifetime of materials and to learn how effective measures are in improving the materials`s performance. In the man-machine are the Halden Man-Machine Laboratory (HAMMLAB) is being upgraded and expanded. Modern, powerful simulators for PWR, BWR and WER reactors began to be installed during the year, and a Virtua Reality centre was set up to complement the HAMMLAB. As the infrastructure was build up, activities dwelt on human factors studies, encompassing situation awareness, the development and assessment of operator support systems, and the validation of software.

  9. Mobile technologies and the spatiotemporal configurations of institutional practice

    DEFF Research Database (Denmark)

    Shklovski, Irina; Troshynski, Emily; Dourish, Paul

    2015-01-01

    are specifically concerned with what happens to institutional roles, power relationships, and decision-making processes when a particular type of information—that of spatiotemporal location of people—is made into a technologically tradable object through the use of location-based systems. We examine...... in which broad adoption of location-based and mobile technologies has the capacity to radically reconfigure the spatiotemporal arrangement of institutional processes. The presence of digital location traces creates new forms of institutional accountability, facilitates a shift in the understood relation...... between location and action, and necessitates new models of interpretation and sense making in practice....

  10. Institute for Energy Technology -Annual report 1996

    International Nuclear Information System (INIS)

    1997-01-01

    Research at Institutt for energiteknikk (IFE) comprises both nuclear and non-nuclear activities. The main nuclear program is centered on the OECD Halden Reactor Project. 19 participating countries and about 100 organisations is involved in the project. The Project is operated by a staff of 280 persons. In the autumn of 1996 the participating organizations reached agreement to continue their research collaboration for a further 3-year period (1997 to 1999). An extensive experimental program was carried out in 1996 using the Halden reactor (HBWR), partly for the joint international program, and partly for contract work for member countries. The main aim of this work is to improve the safety and reliability of existing nuclear power plants. The experimental equipment in the Halden reactor makes it ideal for simulating various operating conditions in different types of rectors. Processes such as corrosion in fuel cladding materials and fracture propagation in irradiated materials under the influence of additives in the coolant water can be studied. In an on-going study, fuel of Russian origin is being compared with modern western fuel. The results, being the first of their kind that are openly available, form an important bases for safety assessments of Russian VVER reactors. The man-machine laboratory is used to study how new technologies influence the operator and to develop computer based systems for improving the safety and accessibility of complex processes

  11. Institute for Energy Technology -Annual report 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    Research at Institutt for energiteknikk (IFE) comprises both nuclear and non-nuclear activities. The main nuclear program is centered on the OECD Halden Reactor Project. 19 participating countries and about 100 organisations is involved in the project. The Project is operated by a staff of 280 persons. In the autumn of 1996 the participating organizations reached agreement to continue their research collaboration for a further 3-year period (1997 to 1999). An extensive experimental program was carried out in 1996 using the Halden reactor (HBWR), partly for the joint international program, and partly for contract work for member countries. The main aim of this work is to improve the safety and reliability of existing nuclear power plants. The experimental equipment in the Halden reactor makes it ideal for simulating various operating conditions in different types of rectors. Processes such as corrosion in fuel cladding materials and fracture propagation in irradiated materials under the influence of additives in the coolant water can be studied. In an on-going study, fuel of Russian origin is being compared with modern western fuel. The results, being the first of their kind that are openly available, form an important bases for safety assessments of Russian VVER reactors. The man-machine laboratory is used to study how new technologies influence the operator and to develop computer based systems for improving the safety and accessibility of complex processes.

  12. Institutional Distance and Partner Selection in International Technological Alliances

    NARCIS (Netherlands)

    Krammer, Marius

    2013-01-01

    This study posits that institutional distance has a negative influence on partner selection in international technological alliances. Empirical results based on a dataset of firms in the global tire industry confirm that firms prefer technological partners from closer cognitive, normative and

  13. The Advanced Technology Environmental Education Center Summer Fellows Institute.

    Science.gov (United States)

    Depken, Diane E.; Zeman, Catherine L.; Lensch, Ellen Kabat; Brown, Edward J.

    2002-01-01

    Describes the background, activities, and outcomes of the Advanced Technology Environmental Education Center (ATEEC) and its Summer Fellows Institutes as a model for disciplinary and cross-disciplinary infusion of environmental science and technology content, curriculum, and methods into the classroom. Presents experiences, themes, and activities…

  14. Annual Report of Institute of Nuclear Chemistry and Technology 2002

    International Nuclear Information System (INIS)

    2003-06-01

    The INCT 2002 Annual Report is the review of scientific activities in all branches being developed in the Institute of Nuclear Chemistry and Technology, Warsaw. The studies are connected in general with the following fields: radiation chemistry and physics, radiation technologies, radiochemistry, stable isotopes, nuclear analytical methods, chemistry in general, radiobiology, process engineering, material engineering, structural studies and diagnostics, nucleonic control systems and accelerators

  15. Annual Report of Institute of Nuclear Chemistry and Technology 2002

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-06-01

    The INCT 2002 Annual Report is the review of scientific activities in all branches being developed in the Institute of Nuclear Chemistry and Technology, Warsaw. The studies are connected in general with the following fields: radiation chemistry and physics, radiation technologies, radiochemistry, stable isotopes, nuclear analytical methods, chemistry in general, radiobiology, process engineering, material engineering, structural studies and diagnostics, nucleonic control systems and accelerators.

  16. Integration of learning technologies into teaching within Fijian Polytechnic Institutions

    Directory of Open Access Journals (Sweden)

    Shalendra Kumar

    2016-11-01

    Full Text Available Abstract In the 21st century, learning technologies have increasingly become pervasive within various forms of learning environments. Institutions of higher education are increasingly turning to these technologies to resource and support their teaching and learning environments under distributed circumstances, face-to-face or blended. Recently, the Fijian Ministry of Education systematically introduced learning technologies into Fiji’s technical colleges to support teaching and learning. However, prior to the widespread deployment of these technologies, little information was available on educators’ perception of the value of these technologies, and the extent to which this could influence adoption. The purpose of this study was to gain a better understanding of lecturers’ perceptions of the value of learning technologies and factors likely to influence their decisions to adopt and integrate these technologies into teaching as well as challenges they are likely to face. A survey was administered to fifty five self-selected lecturers involved in teaching within three Polytechnics in Fiji. Although overall findings suggested that lecturers strongly valued the contribution of learning technologies in enhancing student learning, a number of factors likely to influence the rapid adoption of these technologies were identified. These included attitude towards technology and perceived usefulness of technology in teaching, the institutional cultural environment, as well as resources available to support uptake. This research contributes to the growing significance of individual, contextual and cultural influences in the adoption of learning technologies into teaching.

  17. Radiant Research. Institute for Energy Technology 1948-98

    International Nuclear Information System (INIS)

    Njoelstad, Olav

    1999-01-01

    Institutt for Atomenergi (IFA), or Institute for Atomic Energy, at Kjeller, Norway, was founded in 1948. The history of the institute as given in this book was published in 1999 on the occasion of the institute's 50th anniversary. The scope of the institute was to do research and development as a foundation for peaceful application of nuclear energy and radioactive substances in Norway. The book tells the story of how Norway in 1951 became the first country after the four superpowers and Canada to have its own research reactor. After the completion of the reactor, the institute experienced a long and successful period and became the biggest scientific and technological research institute in Norway. Three more reactors were built, one in Halden and two at Kjeller. Plans were developed to build nuclear powered ships and nuclear power stations. It became clear, however, in the 1970s, that there was no longer political support for nuclear power in Norway, and it was necessary for the institute to change its research profile. In 1980, the institute changed its name to Institutt for energiteknikk (IFE), or Institute for energy technology, to signal the broadened scope. The book describes this painful but successful readjustment and shows how IFE in the 1980s and 1990s succeeded in using its special competence from the nuclear field to establish special competence in new research fields with great commercial potential

  18. Institute of Nuclear Chemistry and Technology annual report 1995

    International Nuclear Information System (INIS)

    1996-01-01

    The report is a collection of short communications being a review of scientific activity of the Institute of Nuclear Chemistry and Technology (INCT), Warsaw, in 1995. The papers are gathered in several branches as follows: radiation chemistry and physics (15); radiochemistry, stable isotopes, nuclear analytical methods, chemistry in general (23); radiobiology (7); nuclear technologies and methods (21); nucleonic control systems (5). The Annual Report of INCT - 1995 contains also a general information about the staff and organization of the Institute, the full list of scientific publications and patents, conferences organized by INCT, thesis and list of projects granted by Polish and international organizations

  19. Institute of Nuclear Chemistry and Technology annual report 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    The report is a collection of short communications being a review of scientific activity of the Institute of Nuclear Chemistry and Technology (INCT), Warsaw, in 1995. The papers are gathered in several branches as follows: radiation chemistry and physics (15); radiochemistry, stable isotopes, nuclear analytical methods, chemistry in general (23); radiobiology (7); nuclear technologies and methods (21); nucleonic control systems (5). The Annual Report of INCT - 1995 contains also a general information about the staff and organization of the Institute, the full list of scientific publications and patents, conferences organized by INCT, thesis and list of projects granted by Polish and international organizations.

  20. Institute of Nuclear Chemistry and Technology annual report 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    The report is a collection of short communications being a review of scientific activity of the Institute of Nuclear Chemistry and Technology (INCT), Warsaw, in 1995. The papers are gathered in several branches as follows: radiation chemistry and physics (15); radiochemistry, stable isotopes, nuclear analytical methods, chemistry in general (23); radiobiology (7); nuclear technologies and methods (21); nucleonic control systems (5). The Annual Report of INCT - 1995 contains also a general information about the staff and organization of the Institute, the full list of scientific publications and patents, conferences organized by INCT, thesis and list of projects granted by Polish and international organizations.

  1. Characteristics of the Institute of Technology 'Prof. Jorge A. Sabato'

    International Nuclear Information System (INIS)

    Galvele, Jose R.

    2001-01-01

    A historical survey is made of the educational and training activities in metallurgy and material sciences carried out by the CNEA since 1962, that were the origin of the 'Prof. Jorge A. Sabato' Institute. Today the Institute, created by the CNEA in association with the National University of General San Martin, is preparing Engineers in Material Sciences and Masters and Ph. D. in Material Sciences and Technology (Mention in Physics and Material). The curricula of the studies are described in detail. The Information Center annexed to the Institute is also described

  2. Ghana Space Science and Technology Institute (GSSTI) - Annual Report 2015

    International Nuclear Information System (INIS)

    2015-01-01

    The Ghana Space Science and Technology Institute (GSSTI) of the Ghana Atomic Energy Commission was established to exploit space science and technology for socio-economic development of Ghana. The report gives the structure of GSSTI and the detailed activities of the year. Various activities include: training and seminars, projects and workshops. Publications and their abstracts are also listed. The report also highlights some of the challenges, provides some recommendations and points to some expectation for the following year.

  3. Annual Report of Institute of Nuclear Chemistry and Technology 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-10-01

    The report is the collection of short communications being the review of the scientific activity of Institute of Nuclear Chemistry and Technology - Warsaw in 1997. The papers are gathered in several branches as follows: radiation chemistry and physics; radiochemistry, stable isotopes, nuclear analytical methods, chemistry in general; radiobiology; nuclear technologies and methods. The annual report of INCT-1997 contains also the general information about INCT as well as the full list of scientific papers being published by the staff in 1997

  4. Annual Report of Institute of Nuclear Chemistry and Technology 2001

    International Nuclear Information System (INIS)

    2002-06-01

    The INCT 2001 Annual Report is the review of scientific activities in all branches being developed in the Institute of Nuclear Chemistry and Technology in Warsaw. The studies are connected in general with the following fields: radiation chemistry and physics, radiation technologies, radiochemistry, stable isotopes, nuclear analytical methods, chemistry in general, radiobiology, process engineering, material engineering, structural studies and diagnostics, nucleonic control systems and accelerators and nuclear analytical methods

  5. Annual Report of Institute of Nuclear Chemistry and Technology 1997

    International Nuclear Information System (INIS)

    1998-06-01

    The report is the collection of short communications being the review of the scientific activity of Institute of Nuclear Chemistry and Technology - Warsaw in 1997. The papers are gathered in several branches as follows: radiation chemistry and physics; radiochemistry, stable isotopes, nuclear analytical methods, chemistry in general; radiobiology; nuclear technologies and methods. The annual report of INCT-1997 contains also the general information about INCT as well as the full list of scientific papers being published by the staff in 1997

  6. Annual Report 2004 of Institute of Nuclear Chemistry and Technology

    Energy Technology Data Exchange (ETDEWEB)

    Michalik, J; Smulek, W; Godlewska-Para, E [eds.

    2005-06-01

    The INCT 2004 Annual Report is the review of scientific activities in all branches being developed in the Institute of Nuclear Chemistry and Technology Warsaw. The studies are connected in general with the following fields: radiation chemistry and physics, radiation technologies, radiochemistry, stable isotopes, nuclear analytical methods, chemistry in general, radiobiology, process engineering, material engineering, structural studies and diagnostics, nucleonic control systems and accelerators, radiobiology and nuclear analytical methods.

  7. Annual Report of Institute of Nuclear Chemistry and Technology 2001

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-06-01

    The INCT 2001 Annual Report is the review of scientific activities in all branches being developed in the Institute of Nuclear Chemistry and Technology in Warsaw. The studies are connected in general with the following fields: radiation chemistry and physics, radiation technologies, radiochemistry, stable isotopes, nuclear analytical methods, chemistry in general, radiobiology, process engineering, material engineering, structural studies and diagnostics, nucleonic control systems and accelerators and nuclear analytical methods.

  8. Annual Report of Institute of Nuclear Chemistry and Technology 1999

    International Nuclear Information System (INIS)

    2000-06-01

    The INCT 1999 Annual Report is the review of scientific activities in all branches being developed in the Institute of Nuclear Chemistry and Technology, Warsaw. The studies are connected in general with the following fields: radiation chemistry and physics, radiation technologies, radiochemistry, stable isotopes, nuclear analytical methods, chemistry in general, radiobiology, process engineering, material engineering, structural studies and diagnostics and nucleonic control systems and accelerators

  9. Annual Report 2004 of Institute of Nuclear Chemistry and Technology

    International Nuclear Information System (INIS)

    Michalik, J.; Smulek, W.; Godlewska-Para, E.

    2005-06-01

    The INCT 2004 Annual Report is the review of scientific activities in all branches being developed in the Institute of Nuclear Chemistry and Technology Warsaw. The studies are connected in general with the following fields: radiation chemistry and physics, radiation technologies, radiochemistry, stable isotopes, nuclear analytical methods, chemistry in general, radiobiology, process engineering, material engineering, structural studies and diagnostics, nucleonic control systems and accelerators, radiobiology and nuclear analytical methods

  10. Annual Report of Institute of Nuclear Chemistry and Technology 1999

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-06-01

    The INCT 1999 Annual Report is the review of scientific activities in all branches being developed in the Institute of Nuclear Chemistry and Technology, Warsaw. The studies are connected in general with the following fields: radiation chemistry and physics, radiation technologies, radiochemistry, stable isotopes, nuclear analytical methods, chemistry in general, radiobiology, process engineering, material engineering, structural studies and diagnostics and nucleonic control systems and accelerators.

  11. Status of Technical and Vocational Education in Rural Institutions in ...

    African Journals Online (AJOL)

    This study was aimed at assessing the state of technical and vocational education in rural institutions in Delta State. Three research questions guided the study. A sample size of fifty (50) principals from 50 rural institutions in Delta State was used for the study. Data were collected using a questionnaire. The study reveals that ...

  12. Waterford Institute of Technology, Tourism and Leisure Building

    Directory of Open Access Journals (Sweden)

    Chris Croly

    2012-04-01

    Full Text Available The Tourism and Leisure Building at Waterford Institute of Technology contains all of the passive design elements that would be expected in a landmark environmentally-conscious educational development. The design however also addresses energy conservation in complex, high-energy kitchen systems in an innovative way, bringing a new level of environmental performance to catering in Ireland.

  13. Institut čistých technologií

    Czech Academy of Sciences Publication Activity Database

    Šňupárek, Richard

    2014-01-01

    Roč. 2014, č. 6 (2014), s. 28-29 ISSN 1210-9525 R&D Projects: GA MŠk ED2.1.00/03.0082 Institutional support: RVO:68145535 Keywords : clean technologies * research project * energetical materials Subject RIV: JQ - Machines ; Tools http://abicko.avcr.cz/2014/06/09/index.html

  14. Electronic Commerce: Canadian Community Colleges and Institutes of Technology.

    Science.gov (United States)

    Association of Canadian Community Colleges.

    This paper reports on the Canadian college system's collaboration with industry and community services in the development and delivery of non-credit e-commerce courses offered through continuing education departments at community colleges and institutes of technology. The paper argues that, in today's changing economy, the accelerated need for…

  15. Alternatives to Industrial Work Placement at Dublin Institute of Technology

    Science.gov (United States)

    Bates, Catherine; Gamble, Elena

    2011-01-01

    In the current economic crisis, higher education graduates need transferable professional skills more than ever. They need resourcefulness, an ability to work reflectively, a sense of civic awareness and an impressive curriculum vitae. This case study analyses how Dublin Institute of Technology's Programme for Students Learning With Communities…

  16. Technological capabilities, institutions and firm productivity: a multilevel study

    Czech Academy of Sciences Publication Activity Database

    Goedhuys, M.; Srholec, Martin

    2015-01-01

    Roč. 27, č. 1 (2015), s. 122-139 ISSN 0957-8811 R&D Projects: GA ČR(CZ) GAP402/10/2310 Institutional support: RVO:67985998 Keywords : productivity * innovation * technological capability Subject RIV: AH - Economics Impact factor: 0.720, year: 2015

  17. The Role of Technology and Institutions for Growth

    DEFF Research Database (Denmark)

    Henriksen, Ingrid; Lampe, Markus; Sharp, Paul

    We consider the relative contributions of changing technology and institutions for economic growth through the investigation of a natural experiment in history: the almost simultaneous introduction of the automatic cream separator and the cooperative ownership form in the Danish dairy industry fr...

  18. Institute of Nuclear Chemistry and Technology annual report 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    This annual report is a collection of short communications being a review of scientific activity of the Institute of Nuclear Chemistry and Technology, Warsaw, Poland in 1994. The papers are gathered into several branches as follows: radiation chemistry and physics (16 papers); radiochemistry, stable isotopes, nuclear analytical methods, chemistry in general (17 papers); radiobiology (6 papers); nuclear technologies and methods (30 papers). The annual report of INCT-1994 contains also a general information about the Institute, the full list of papers published in 1994, information about Nukleonika - the International Journal of Nuclear Research being edited in INCT, the list of patent granted and patent applications in 1994, information about conferences organized by the Institute, the list of Ph.D. and D.Sc. finished in 1994 as well as the list of research projects and contracts being realized in INCT during 1994.

  19. Institute of Nuclear Chemistry and Technology annual report 1994

    International Nuclear Information System (INIS)

    1995-01-01

    This annual report is a collection of short communications being a review of scientific activity of the Institute of Nuclear Chemistry and Technology, Warsaw, Poland in 1994. The papers are gathered into several branches as follows: radiation chemistry and physics (16 papers); radiochemistry, stable isotopes, nuclear analytical methods, chemistry in general (17 papers); radiobiology (6 papers); nuclear technologies and methods (30 papers). The annual report of INCT-1994 contains also a general information about the Institute, the full list of papers published in 1994, information about Nukleonika - the International Journal of Nuclear Research being edited in INCT, the list of patent granted and patent applications in 1994, information about conferences organized by the Institute, the list of Ph.D. and D.Sc. finished in 1994 as well as the list of research projects and contracts being realized in INCT during 1994

  20. Institute of Nuclear Chemistry and Technology annual report 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    This annual report is a collection of short communications being a review of scientific activity of the Institute of Nuclear Chemistry and Technology, Warsaw, Poland in 1994. The papers are gathered into several branches as follows: radiation chemistry and physics (16 papers); radiochemistry, stable isotopes, nuclear analytical methods, chemistry in general (17 papers); radiobiology (6 papers); nuclear technologies and methods (30 papers). The annual report of INCT-1994 contains also a general information about the Institute, the full list of papers published in 1994, information about Nukleonika - the International Journal of Nuclear Research being edited in INCT, the list of patent granted and patent applications in 1994, information about conferences organized by the Institute, the list of Ph.D. and D.Sc. finished in 1994 as well as the list of research projects and contracts being realized in INCT during 1994.

  1. Annual Report of Institute of Nuclear Chemistry and Technology 1998

    International Nuclear Information System (INIS)

    1999-04-01

    Actual edition of Annual Report is a full review of scientific activities of the Institute of Nuclear Chemistry and Technology (INCT), Warsaw, in 1998. The abstracts are presented in the following group of subjects: radiation chemistry and physics, radiation technologies (26); radiochemistry, stable isotopes, nuclear analytical methods, chemistry in general (25); radiobiology (11); nuclear technologies and methods - process engineering (5); material engineering, structural studies and diagnostics (9); nucleonic control systems (7). The edition also included the list of INCT scientific publications and patents as well as information on conferences organized or co-organized by the INCT in 1998

  2. HTGR technology development: status and direction

    International Nuclear Information System (INIS)

    Kasten, P.R.

    1982-01-01

    During the last two years there has been an extensive and comprehensive effort expended primarily by General Atomic (GA) in generating a revised technology development plan. Oak Ridge National Laboratory (ORNL) has assisted in this effort, primarily through its interactions over the past years in working together with GA in technology development, but also through detailed review of the initial versions of the technology development plan as prepared by GA. The plan covers Fuel Technology, Materials Technology (including metals, graphite, and ceramics), Plant Technology (including methods, safety, structures, systems, heat exchangers, control and electrical, and mechanical), and Component Design Verification and Support areas

  3. Home and Away: The Use of Institutional and Non-Institutional Technologies to Support Learning and Teaching

    Science.gov (United States)

    Flavin, Michael

    2016-01-01

    This paper examines the usage of institutional and non-institutional technologies to support learning and teaching in UK higher education. Previous work on disruptive technology and disruptive innovation has argued that users prefer simple and convenient technologies, and often repurpose technologies from designers' intentions; this paper…

  4. Annual report of Institute of Nuclear Chemistry and Technology 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    The report is a collection of short communications being a review of the scientific activities of the Institute of Nuclear Chemistry and Technology, Warsaw in 1996. The papers are gathered in several branches as follows: radiation chemistry and physics (17); Radiochemistry, stable isotopes, nuclear analytical methods,chemistry in general (20); radiobiology (9); nuclear technologies and methods (28).The last and biggest chapter has been divided in four smaller groups; process engineering; material engineering,structural studies,diagnostics; radiation technologies; nucleonic control systems. The annual report of INCT-1996 contains also a general information of Institute, the full list of scientific publications and patents, conferences organized by INCT, Ph.D. and D.Sc. thesis, a list of projects granted by Polish Committee of Scientific Research and other organizations.

  5. Annual report of Institute of Nuclear Chemistry and Technology 1996

    International Nuclear Information System (INIS)

    1997-06-01

    The report is a collection of short communications being a review of the scientific activities of the Institute of Nuclear Chemistry and Technology, Warsaw in 1996. The papers are gathered in several branches as follows: radiation chemistry and physics (17); Radiochemistry, stable isotopes, nuclear analytical methods,chemistry in general (20); radiobiology (9); nuclear technologies and methods (28).The last and biggest chapter has been divided in four smaller groups; process engineering; material engineering,structural studies,diagnostics; radiation technologies; nucleonic control systems. The annual report of INCT-1996 contains also a general information of Institute, the full list of scientific publications and patents, conferences organized by INCT, Ph.D. and D.Sc. thesis, a list of projects granted by Polish Committee of Scientific Research and other organizations

  6. Buried Waste Integrated Demonstration Technology Preparedness and Status Report Guidance

    International Nuclear Information System (INIS)

    Blacker, P.B.; Bonnenberg, R.W.; Cannon, P.G.; Hyde, R.A.; Watson, L.R.

    1994-04-01

    A Technology Preparedness and Status Report is required for each Technical Task Plan funded by the Buried Waste Integrated Demonstration. This document provides guidance for the preparation of that report. Major sections of the report will include a subset of the need for the technology, objectives of the demonstration, technology description and readiness evaluation, demonstration requirements, and preparedness checklist and action plan

  7. [Assisted reproductive technologies and the embryo status].

    Science.gov (United States)

    Englert, Y

    The status of the human embryo has always be a subject of philosophical and theological thoughts with major social consequences, but, until the 19th century, it has been mainly an abstraction. The arrival of the human embryo in vitro, materialized by Louise Brown's birth in 1978 and above all by the supernumerary embryos produced by the Australian team of Trounson and Wood following the introduction of ovarian stimulation, will turn theoretical thoughts into a reality. Nobody may ignore the hidden intentions behind the debate, as to recognise a status to a few days old embryo will immediately have a major impact on the status of a few weeks old foetus and therefore on the abortion rights. We will see that the embryo status, essentially based as well on a vision on the good and evil as on social order, cannot be based on a scientific analysis of the reproduction process but comes from a society's choice, by essence " arbitrary " and always disputable. This does not preclude the collectivity right and legitimacy to give a precise status and it is remarkable to observe the law is careful not to specify which status to give to the human embryo. It is more thru handling procedures and functioning rules that the law designed the embryo position, neither with a status of a person, nor of a thing. It nevertheless remains true that there is a constant risk that the legislation gives the embryo a status that would call into question it's unique characteristic of early reproductive stage, jeopardizing at once the hard-won reproductive freedom (reproductive choice) as well as freedom of research on embryonic stem cells, one of the most promising field of medical research.

  8. Water treatment for fossil fuel power generation - technology status report

    International Nuclear Information System (INIS)

    2006-01-01

    This technology status report focuses on the use of water treatment technology in fossil fuel power plants. The use of polymeric ion exchange resins for deionization of water, the currently preferred use of ion exchange for economically treating water containing low dissolved salts, the use of low pressure high-flux membranes, membrane microfiltration, and reverse osmosis are discussed. Details are given of the benefits of the technologies, water use at power plants, the current status of water treatment technologies, and the potential for future developments, along with power plant market trends and potentials, worldwide developments, and UK capabilities in water treatment plant design and manufacturing

  9. Public Action and Innovationsupport Institutions in New Technological Agglomerations

    DEFF Research Database (Denmark)

    Borras, Susana; Bacaria, Jordi; Fernandez-Ribas, Andrea

    2002-01-01

    In all industrial and technological agglomerations several types of public and semi-public actors coexist. The same happens with the levels of government. Consequently, the daily reality of agglomerations is characterized by a wide diversity of innovation-support institutions more or less actively...... on the major efforts of different public actors in the territory since the 1980s, mainly through the establishment and enhancement of innovation-support institutions, and analyses succinctly their effects through selected successful and failed cases. Two normative statements are suggested from the analysis....... The first is that policy strategies should not try to be hegemonic. Instead, they should be elaborated seeking complementarity and coexistence. A second normative conclusion is the necessity of fostering the learning processes within and across institutions, by mobilizing collectively the assets of the area...

  10. Gasification - Status and Technology; Foergasning - Status och teknik

    Energy Technology Data Exchange (ETDEWEB)

    Held, Joergen

    2011-07-15

    In this report gasification and gas cleaning techniques for biomass are treated. The main reason for gasifying biomass is to refine the fuel to make it suitable for efficient CHP production, as vehicle fuel or in industrial processes. The focus is on production of synthesis gas that can be used for production of vehicle fuel and for CHP production. Depending on application different types of gasifiers, gasification techniques and process parameters are of interest. Two gasification techniques have been identified as suitable for syngas generation, mainly due to the fact that they allow the production of a nitrogen free gas out of the gasifier; Indirect atmospheric gasification and Pressurized oxygen blown gasification For CHP production there are no restrictions on the gas composition in terms of nitrogen and here air-blown gasification is of interest as well. The main challenge when it comes to gas cleaning is related to sulphur and tars. There are different concepts and alternatives to handle sulphur and tars. Some of them is based on conventional techniques with well-proven components that are commercially available while others more advantageous solutions, still need further development. The report deals to a minor extent with the conversion of syngas to synthetic fuels. The ongoing research and development of gasification techniques is extensive, both on national and international level. Although many process concepts and components have been demonstrated, there is still no full-scale plant for the production of synthetic fuels based on biomass. Factors affecting the choice of technology are plant size, operating conditions, the possibility for process integration, access to feedstock, market aspects, incentives and economic instruments et cetera. Increased competition for biofuels will inevitably lead to higher raw material costs. This in turn means that the fuel chains with high efficiency, such as biomethane through gasification and methanation, are favored

  11. Status of technology for nuclear waste management

    International Nuclear Information System (INIS)

    Lieberman, J.A.

    1984-01-01

    In the area of low- and intermediate-level radioactive wastes the successful development and application of specific management technologies have been demonstrated over the years. The major area in which technology remains to be effectively implemented is in the management of high-level wastes from the nuclear fuel cycle. Research and development specifically directed at the management of high-level radioactive wastes in the USA and other countries is briefly reviewed in the article introduced

  12. Status and promise of fuel cell technology

    Energy Technology Data Exchange (ETDEWEB)

    Williams, M.C. [National Energy Technology Lab., Pittsburgh, PA (United States). Dept. of Energy

    2001-09-01

    The niche or early entry market penetration by ONSI and its phosphoric acid fuel cell technology has proven that fuel cells are reliable and suitable for premium power and other opportunity fuel niche market applications. Now, new fuel cell technologies - solid oxide fuel cells, molten carbonate fuel cells, and polymer electrolyte fuel cells - are being developed for near-term distributed generation shortly after 2003. Some of the evolving fuel cell systems are incorporating gas turbines in hybrid configurations. The combination of the gas turbine with the fuel cell promises to lower system costs and increase efficiency to enhance market penetration. Market estimates indicate that significant early entry markets exist to sustain the initially high cost of some distributed generation technologies. However, distributed generation technologies must have low introductory first cost, low installation cost, and high system reliability to be viable options in competitive commercial and industrial markets. In the long-term, solid state fuel cell technology with stack costs under $100/kilowatt (kW) promises deeper and wider market penetration in a range of applications including a residential, auxillary power, and the mature distributed generation markets. The solid state energy conversion alliance (SECA) with its vision for fuel cells in 2010 was recently formed to commercialize solid state fuel cells and realize the full potential of the fuel cell technology. Ultimately, the SECA concept could lead to megawatt-size fuel-cell systems for commercial and industrial applications and Vision 21 fuel cell turbine hybrid energy plants in 2015. (orig.)

  13. Status of AMS at the China Institute of Atomic Energy

    International Nuclear Information System (INIS)

    Jiang Shan; He Ming; Hu Yueming; Yuan Jian

    2007-01-01

    The first accelerator mass spectrometry (AMS) system in China was set up at the China Institute of Atomic Energy in 1989. In the following years, long-lived nuclides 10 Be, 26 Al, 36 Cl, 41 Ca, 79 Se and 129 I were measured in geology, environment and biology samples. The newly development of the AMS measurement and applications in recent years were introduced. The current projects include upgrading of AMS injection system for increasing mass resolution, new particle identification techniques for separation of isobars, development of the AMS measurement methods for 99 Tc, 93 Zr, 151 Sm and 182 Hf analyses, and applications in biology, environment and nuclear astrophysics. (authors)

  14. Nanofluid Technology: Current Status and Future Research

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Stephen U.-S. [Argonne National Lab. (ANL), Argonne, IL (United States). Energy Technology Division

    1998-10-20

    Downscaling or miniaturization has been a recent major trend in modern science and technology. Engineers now fabricate microscale devices such as microchannel heat exchangers, and micropumps that are the size of dust specks. Further major advances would be obtained if the coolant flowing in the microchannels were to contain nanoscale particles to enhance heat transfer. Nanofluid technology will thus be an emerging and exciting technology of the 21st century. This paper gives a brief history of the Advanced Fluids Program at Argonne National Laboratory (ANL), discusses the concept of nanofluids, and provides an overview of the R&D program at ANL on the production, property characterization, and performance of nanofluids. It also describes examples of potential applications and benefits of nanofluids. Finally, future research on the fundamentals and applications of nanofluids is addressed.

  15. The status of basic technology in Cross River State Junior ...

    African Journals Online (AJOL)

    The purpose of the study was to ascertain the status of basic technology in Cross River State junior secondary schools. Descriptive survey design was adopted for the study. The study was guided by three (3) research questions. The population for the study comprised of one hundred and twelve (112) basic technology ...

  16. Status of fast reactor technology in China

    International Nuclear Information System (INIS)

    Xu Mi

    1992-01-01

    The paper has introduced briefly the recent news about the Chinese nuclear programme on PWR and FBR. Concerning the FFR design, some issues under consideration have been presented, including the matches between thermo-parameters of primary sodium and of steam, the arrangement of control and safety rods which correspond to first and second shut-down systems, the structure of inner vessel and the axial length of subassembly. With regard to the R and D of FBR technology, some results on sodium technology and on the cladding materials have been given in the paper. Finally, some progress and troubles on site selection for this reactor have also been outlined. (author)

  17. Status of ion sources at National Institute of Radiological Sciences.

    Science.gov (United States)

    Kitagawa, A; Fujita, T; Goto, A; Hattori, T; Hamano, T; Hojo, S; Honma, T; Imaseki, H; Katagiri, K; Muramatsu, M; Sakamoto, Y; Sekiguchi, M; Suda, M; Sugiura, A; Suya, N

    2012-02-01

    The National Institute of Radiological Sciences (NIRS) maintains various ion accelerators in order to study the effects of radiation of the human body and medical uses of radiation. Two electrostatic tandem accelerators and three cyclotrons delivered by commercial companies have offered various life science tools; these include proton-induced x-ray emission analysis (PIXE), micro beam irradiation, neutron exposure, and radioisotope tracers and probes. A duoplasmatron, a multicusp ion source, a penning ion source (PIG), and an electron cyclotron resonance ion source (ECRIS) are in operation for these purposes. The Heavy-Ion Medical Accelerator in Chiba (HIMAC) is an accelerator complex for heavy-ion radiotherapy, fully developed by NIRS. HIMAC is utilized not only for daily treatment with the carbon beam but also for fundamental experiments. Several ECRISs and a PIG at HIMAC satisfy various research and clinical requirements.

  18. Fiber Optic Communications Technology. A Status Report.

    Science.gov (United States)

    Hull, Joseph A.

    Fiber optic communications (communications over very pure glass transmission channels of diameter comparable to a human hair) is an emerging technology which promises most improvements in communications capacity at reasonable cost. The fiber transmission system offers many desirable characteristics representing improvements over conventional…

  19. Technology - a review of current status

    International Nuclear Information System (INIS)

    Wolf, R.

    1986-01-01

    The book reviews the history of the efforts taken by the political and administrative authorities to acquire the technical knowledge required to fulfill their functions as competent authorities to evaluate and decide on technical feasibility and economic justification of complex technical processes, a task which constantly puts strain on the authorities, who have to keep up with the technological know-how of the industrial and technological establishments who, as it where, stand opposite to the authorities in the process of legal regulation of technological risks. The author explains the problems involved in the attempt to use existing, or establish adequate new, legal provisions to reconcile the interests of the law with those of the economy. The leading example for this purpose is the air pollution control laws. Further aspects discussed are steps taken from a technicalization of the law towards a proceduralization, and attempts towards a control of technology in a democratic constitutional state. The chapter on the 'risk to be tolerated' in the law on licensing of nuclear installations has been separately analysed and abstracted for the database. (HSCH) [de

  20. Extravehicular Activity Technology Development Status and Forecast

    Science.gov (United States)

    Chullen, Cinda; Westheimer, David T.

    2011-01-01

    The goal of NASA s current EVA technology effort is to further develop technologies that will be used to demonstrate a robust EVA system that has application for a variety of future missions including microgravity and surface EVA. Overall the objectives will be to reduce system mass, reduce consumables and maintenance, increase EVA hardware robustness and life, increase crew member efficiency and autonomy, and enable rapid vehicle egress and ingress. Over the past several years, NASA realized a tremendous increase in EVA system development as part of the Exploration Technology Development Program and the Constellation Program. The evident demand for efficient and reliable EVA technologies, particularly regenerable technologies was apparent under these former programs and will continue to be needed as future mission opportunities arise. The technological need for EVA in space has been realized over the last several decades by the Gemini, Apollo, Skylab, Space Shuttle, and the International Space Station (ISS) programs. EVAs were critical to the success of these programs. Now with the ISS extension to 2028 in conjunction with a current forecasted need of at least eight EVAs per year, the EVA hardware life and limited availability of the Extravehicular Mobility Units (EMUs) will eventually become a critical issue. The current EMU has successfully served EVA demands by performing critical operations to assemble the ISS and provide repairs of satellites such as the Hubble Space Telescope. However, as the life of ISS and the vision for future mission opportunities are realized, a new EVA systems capability will be needed and the current architectures and technologies under development offer significant improvements over the current flight systems. In addition to ISS, potential mission applications include EVAs for missions to Near Earth Objects (NEO), Phobos, or future surface missions. Surface missions could include either exploration of the Moon or Mars. Providing an

  1. Current Status on Biochip and Detection Technology

    International Nuclear Information System (INIS)

    Park, Sang Hyun; Gwon, Hui Jeong

    2007-06-01

    The recent biotechnology technique has been miniaturized and it features a fusion of electricity, electronics and mechanics in the existing biology. As an example, biochip is a collection of miniaturized test sites (microarrays) arranged on a solid substrate that permits many tests to be performed at the same time in order to achieve higher throughput and speed. Like a computer chip that can perform millions of mathematical operations in a second, the biochip can perform thousands of biological reactions, such as decoding genes, in a few seconds. The biochip is being used in toxicological, protein, and biochemical research and it can also be used to rapidly detect chemical agents used in biological warfare so that defensive measures can be taken. These biochip technologies incorporate elements of microfluidics, micromachining, synthetic chemistry, separation technologies, and detection technologies of biological molecules. Basically, biochips can be divided into two types: microarray and lab-on-a-chip system. Microarrays use planted probes to catch and identify target biological molecules while lab-on-a-chips actively process loaded samples. The biochips are becoming more diverse and customers are appearing all over the world. The products from the biochip market are being used to help accelerating the research processes and capabilities of bio-pharmaceutical drug discovery and basic academic bioresearch. To fully take advantages of the attributes of biochip technologies such as miniaturization, parallelism, automation and integration, there are some problems to overcome. The major problem is to reduce the cost. Currently the prices of biochip products are too expensive to replace traditional products and processes. As a method to solve the problem, a radioisotope can be used as a detecting sensor by appling on the biochip, as it were, radio-biochip that will further bring the cost down. The originality using the radioisotope on the biochip technology will be able

  2. Current Status on Biochip and Detection Technology

    Energy Technology Data Exchange (ETDEWEB)

    Park, Sang Hyun; Gwon, Hui Jeong

    2007-06-15

    The recent biotechnology technique has been miniaturized and it features a fusion of electricity, electronics and mechanics in the existing biology. As an example, biochip is a collection of miniaturized test sites (microarrays) arranged on a solid substrate that permits many tests to be performed at the same time in order to achieve higher throughput and speed. Like a computer chip that can perform millions of mathematical operations in a second, the biochip can perform thousands of biological reactions, such as decoding genes, in a few seconds. The biochip is being used in toxicological, protein, and biochemical research and it can also be used to rapidly detect chemical agents used in biological warfare so that defensive measures can be taken. These biochip technologies incorporate elements of microfluidics, micromachining, synthetic chemistry, separation technologies, and detection technologies of biological molecules. Basically, biochips can be divided into two types: microarray and lab-on-a-chip system. Microarrays use planted probes to catch and identify target biological molecules while lab-on-a-chips actively process loaded samples. The biochips are becoming more diverse and customers are appearing all over the world. The products from the biochip market are being used to help accelerating the research processes and capabilities of bio-pharmaceutical drug discovery and basic academic bioresearch. To fully take advantages of the attributes of biochip technologies such as miniaturization, parallelism, automation and integration, there are some problems to overcome. The major problem is to reduce the cost. Currently the prices of biochip products are too expensive to replace traditional products and processes. As a method to solve the problem, a radioisotope can be used as a detecting sensor by appling on the biochip, as it were, radio-biochip that will further bring the cost down. The originality using the radioisotope on the biochip technology will be able

  3. Information actions in science and technology: institutionalities, agencies and subjects

    Directory of Open Access Journals (Sweden)

    Rodrigo Rabello

    Full Text Available Considering the influence of new agency forms - intervention and interaction among subjects - in the context of information intermediation, we aim to approach information actions in Science and Technology (S&T taking into consideration the institutionalities involved. For such, we assume there is an influence of a theoretical model emerging in Information Science (IS regarding current inventive and interactive form propitiated by the Web. The text is structured in two central topics bringing: i theoretical and epistemic constructions of the "information action" concept; and ii a certain interpretation oriented by the "informational action in S&T" construct, taking as its object the actions performed by IBICT (Brazilian Institute for Information in Science and Technology, directed towards excellence in information. Finally, we discuss how limitations of the "systemic model" propitiate the construction of new study objects in the model emerging in IS from theoretical innovations and counterpoints thoughts facing the diverse forms of information action, considering, for instance, the action of subjects on what concerns the validation of information in the current scenery of institutional intermediation.

  4. History and current status of nuclear fuel reprocessing technology

    International Nuclear Information System (INIS)

    Funasaka, Hideyuki; Nagai, Toshihisa; Washiya, Tadahiro

    2008-01-01

    History and present state of fast breeder reactor was reviewed in series. As a history and current status of nuclear fuel reprocessing technology, this ninth lecture presented the progress of the FBR fuel reprocessing technology and advanced reprocessing processes. FBR fuel reprocessing technology had been developed to construct the reprocessing equipment test facilities (RETF) based on PUREX process technologies. With economics, reduction of environmental burdens and proliferation resistance taken into consideration, advanced aqueous method for nuclear fuel cycle activities has been promoted as the government's basic policy. Innovative technologies on mechanical disassembly, continuous rotary dissolver, crystallizer, solvent extraction and actinides recovery have been mainly studied. (T. Tanaka)

  5. Current status of Chinese nuclear power industry and technology

    International Nuclear Information System (INIS)

    Kim, Hyun Min; Kim, Min; Jeong, Hee Jong; Hwang, Jeong Ki; Cho, Chung Hee

    1996-10-01

    China has been carrying out active international cooperation aiming to be a country where is to be an economical super power and an advanced country in nuclear power technology by the year early 2000, and China also has begun to be recognized as the largest potential market for the construction of nuclear power plants(NPPs) expecting to construct more than thirty nuclear power units by the year 2020. China has advanced technology in the basic nuclear science including liquid metal breeder reactor technology, nuclear material, medium and small size power plants, and isotope production technology, and also China has complete nuclear fuel cycle technology. However, China still has low NPP technology. Therefore, it is expected that China may have complementary cooperative relationship with China, it is expected that Korea may have an access to the advanced Chinese nuclear science technology, and may have a good opportunity to explore the Chinese market actively exporting excellent Korean NPP technology, and further may have a good position to the neighboring Asian countries' NPP markets. From this perspective, general Chinese social status, major nuclear R and D activity status, and correct NPP and technology status have been analyzed in this report, and this report is expected to be a useful resource for cooperating with China in future. 10 tabs., 6 figs., 16 refs. (Author)

  6. Status of Solar Sail Technology Within NASA

    Science.gov (United States)

    Johnson, Les; Young, Roy; Montgomery, Edward; Alhorn, Dean

    2010-01-01

    In the early 2000s, NASA made substantial progress in the development of solar sail propulsion systems for use in robotic science and exploration of the solar system. Two different 20-m solar sail systems were produced and they successfully completed functional vacuum testing in NASA Glenn Research Center's (GRC's) Space Power Facility at Plum Brook Station, Ohio. The sails were designed and developed by ATK Space Systems and L Garde, respectively. The sail systems consist of a central structure with four deployable booms that support the sails. These sail designs are robust enough for deployment in a one-atmosphere, one-gravity environment and were scalable to much larger solar sails perhaps as large as 150 m on a side. Computation modeling and analytical simulations were also performed to assess the scalability of the technology to the large sizes required to implement the first generation of missions using solar sails. Life and space environmental effects testing of sail and component materials were also conducted. NASA terminated funding for solar sails and other advanced space propulsion technologies shortly after these ground demonstrations were completed. In order to capitalize on the $30M investment made in solar sail technology to that point, NASA Marshall Space Flight Center (MSFC) funded the NanoSail-D, a subscale solar sail system designed for possible small spacecraft applications. The NanoSail-D mission flew on board the ill-fated Falcon-1 Rocket launched August 2, 2008, and due to the failure of that rocket, never achieved orbit. The NanoSail-D flight spare will be flown in the Fall of 2010. This paper will summarize NASA's investment in solar sail technology to-date and discuss future opportunities

  7. The status of nuclear power technology

    International Nuclear Information System (INIS)

    Calori, F.

    1976-01-01

    A survey is presented of the present state of development concerning nuclear power technology, and the prospects of a modified future development of nuclear energy in the world are dealt with, modification being necessary on account of altered conditions in the development of the energy economy. Projections are made for the development of the fuel market taking into account the quantities and costs for the various steps of the fuel cycle. (UA) [de

  8. Status of solar sail technology within NASA

    Science.gov (United States)

    Johnson, Les; Young, Roy; Montgomery, Edward; Alhorn, Dean

    2011-12-01

    In the early 2000s, NASA made substantial progress in the development of solar sail propulsion systems for use in robotic science and exploration of the solar system. Two different 20-m solar sail systems were produced. NASA has successfully completed functional vacuum testing in their Glenn Research Center's Space Power Facility at Plum Brook Station, Ohio. The sails were designed and developed by Alliant Techsystems Space Systems and L'Garde, respectively. The sail systems consist of a central structure with four deployable booms that support each sail. These sail designs are robust enough for deployment in a one-atmosphere, one-gravity environment and are scalable to much larger solar sails - perhaps as large as 150 m on a side. Computation modeling and analytical simulations were performed in order to assess the scalability of the technology to the larger sizes that are required to implement the first generation of missions using solar sails. Furthermore, life and space environmental effects testing of sail and component materials was also conducted.NASA terminated funding for solar sails and other advanced space propulsion technologies shortly after these ground demonstrations were completed. In order to capitalize on the $30 M investment made in solar sail technology to that point, NASA Marshall Space Flight Center funded the NanoSail-D, a subscale solar sail system designed for possible small spacecraft applications. The NanoSail-D mission flew on board a Falcon-1 rocket, launched August 2, 2008. As a result of the failure of that rocket, the NanoSail-D was never successfully given the opportunity to achieve orbit. The NanoSail-D flight spare was flown in the Fall of 2010. This review paper summarizes NASA's investment in solar sail technology to date and discusses future opportunities.

  9. Designing institutions for climate change: Why rational design involves technology

    Energy Technology Data Exchange (ETDEWEB)

    Coninck, H. de [Energy Research Centre of the Netherlands, Petten (Netherlands)

    2008-09-30

    This paper aims to explore how to augment the institutional solutions offered by current political theory for addressing the unprecedented problem of climate change. Although steering directly at emission reductions in an international treaty has benefits in terms of cost-effectiveness, the paper arrives at the conclusion that considerations around technological development should be drawn into the treaty equation in order to generate sufficient reciprocity to have a politically feasible international regime. It then argues that the benefits of technology agreements for climate change mitigation may be larger than commonly assumed, as they - if properly designed - could lead to real emission reductions and provide more flexibility to reach agreement in post-2012 negotiations than proposals modelled exclusively on the Kyoto Protocol or other types of absolute emission targets. Based on rational design of international institutions for environmental governance, and attempting to take into account considerations of technological dynamics and the 'sociotechnical system', contours of a possible environmentally effective and politically feasible international climate change agreements are sketched.

  10. Diamond detector technology: status and perspectives

    CERN Document Server

    Kagan, Harris; Artuso, M; Bachmair, F; Bäni, L; Bartosik, M; Beacham, J; Beck, H P; Bellini,, V; Belyaev, V; Bentele, B; Berdermann, E; Bergonzo, P; Bes, A; Brom, J-M; Bruzzi, M; Cerv, M; Chiodini, G; Chren, D; Cindro, V; Claus, G; Collot, J; Cumalat, J; Dabrowski, A; D'Alessandro, R; De Boer, W; Dehning, B; Dorfer, C; Dunser, M; Eremin, V; Eusebi, R; Forcolin, G; Forneris, J; Frais-Kölbl, H; Gan, K K; Gastal, M; Giroletti, C; Goffe, M; Goldstein, J; Golubev, A; Gorišek, A; Grigoriev, E; Grosse-Knetter, J; Grummer, A; Gui, B; Guthoff, M; Haughton, I; Hiti, B; Hits, D; Hoeferkamp, M; Hofmann, T; Hosslet, J; Hostachy, J-Y; Hügging, F; Hutton, C; Jansen, H; Janssen, J; Kanxheri, K; Kasieczka, G; Kass, R; Kassel, F; Kis, M; Kramberger, G; Kuleshov, S; Lacoste, A; Lagomarsino, S; Lo Giudice, A; Lukosi, E; Maazouzi, C; Mandic, I; Mathieu, C; Mcfadden, N; Menichelli, M; Mikuž, M; Morozzi, A; Moss, J; Mountain, R; Murphy, S; Muškinja, M; Oh, A; Oliviero, P; Passeri, D; Pernegger, H; Perrino, R; Picollo, F; Pomorski, M; Potenza, R; Quadt, A; Re, A; Reichmann, M; Riley, G; Roe, S; Sanz, D; Scaringella, M; Schaefer, D; Schmidt, C J; Schnetzer, S; Schreiner, T; Sciortino, S; Scorzoni, A; Seidel, S; Servoli, L; Sopko, B; Sopko, V; Spagnolo, S; Spanier, S; Stenson, K; Stone, R; Sutera, C; Taylor, Aaron; Traeger, M; Tromson, D; Trischuk, W; Tuve, C; Uplegger, L; Velthuis, J; Venturi, N; Vittone, E; Wagner, Stephen; Wallny, R; Wang, J C; Weingarten, J; Weiss, C; Wengler, T; Wermes, N; Yamouni, M; Zavrtanik, M

    2017-01-01

    The status of material development of poly-crystalline chemical vapor deposition (CVD) diamond is presented. We also present beam test results on the independence of signal size on incident par-ticle rate in charged particle detectors based on un-irradiated and irradiated poly-crystalline CVD diamond over a range of particle fluxes from 2 kHz/cm2 to 10 MHz/cm2. The pulse height of the sensors was measured with readout electronics with a peaking time of 6 ns. In addition the first beam test results from 3D detectors made with poly-crystalline CVD diamond are presented. Finally the first analysis of LHC data from the ATLAS Diamond Beam Monitor (DBM) which is based on pixelated poly-crystalline CVD diamond sensors bump-bonded to pixel readout elec-tronics is shown.

  11. USDOE radioactive waste incineration technology: status review

    International Nuclear Information System (INIS)

    Borduin, L.C.; Taboas, A.L.

    1980-01-01

    Early attempts were made to incinerate radioactive wastes met with operation and equipment problems such as feed preparation, corrosion, inadequate off-gas cleanup, incomplete combustion, and isotope containment. The US Department of Energy (DOE) continues to sponsor research, development, and the eventual demonstration of radioactive waste incineration. In addition, several industries are developing proprietary incineration system designs to meet other specific radwaste processing requirements. Although development efforts continue, significant results are available for the nuclear community and the general public to draw on in planning. This paper presents an introduction to incineration concerns, and an overview of the prominent radwaste incineration processes being developed within DOE. Brief process descriptions, status and goals of individual incineration systems, and planned or potential applications are also included

  12. 技專校院圖書館實施編目委外作業之決定性因素及其現況研究 The Key Decision Making Criteria and Current Status of Catalog Outsourcing Operations in Libraries of Institute of Technology and Technical College

    Directory of Open Access Journals (Sweden)

    Ti Yu

    2005-09-01

    Full Text Available 本研究旨在了解技專校院圖書館實施編目委外作業之現況,並探究影響技專校院圖書館編目委外作業的決定性因素。本研究採用問卷調查法來進行研究,於民國94 年6月初針對全國科技大學、技術學院及專科學校圖書館發出89份問卷,截至94年7月底為止,總共回收了54份問卷,回收率約為61%。本研究利用百分比 及次數分配統計分析方法,了解受訪圖書館目前實施編目委外作業之概況;並利用卡方檢定、T檢定及Logistic迴歸模式等統計分析檢驗受訪圖書館編目委 外的決定性因素及影響程度。依據資料分析結果發現:85%的受訪技專校院圖書館有過編目委外的經驗,且實施這種委外作業方式也已行之多年;「轉檔後逐筆檢 驗」是受訪圖書館對委外編目品質最常採用的控管方式;國內編目廠商素質不一的情形是確實存在的現象;受訪圖書館對編目廠商的整體服務滿意程度在中等以上: 「人力」應是影響技專校院圖書館將編目委外作業之決定性因素。This study intends to explore the current status in libraries of Taiwanese institute of technology and technical college regarding catalog outsourcing operations to third parties and the key criteria in making such decisions. Eighty nine copies of questionnaires were distributed to institute of technology, technical college and science and technology university nationwide in June 2005. Five four copies had been collected, which represented a 61% response rate, until end of July 2005. The status of libraries outsourcing of cataloging was then captured in percentage and histogram format. These status information is then cross examined with surveyed decision making criteria with Chi-square Test, T-Test and Logistic Regression statistical models. The results of statistical analysis indicate 85% of libraries surveyed have actual experiences in

  13. Practical Education of Aerospace Field in Muroran Institute of Technology

    Science.gov (United States)

    Tanatsugu, Nobuhiro

    Engineering study in the field of aerospace is an effective way to enhance the student motivation. The young students can be attracted by the research and development aiming at returning its results to the public society. The Muroran Institute of Technology is carrying out the practical education in the field of real research and development by the Aerospace Research Center. The projects of the center is being performed well in cooperation with the national research organization and the private companies and thereby the students have the good opportunity to find the actual situation of the real world.

  14. Sensing technology current status and future trends

    CERN Document Server

    Mukhopadhyay, Subhas; Jayasundera, Krishanthi; Bhattacharyya, Nabarun

    2014-01-01

    This book is written for academic and industry professionals working in the field of sensing, instrumentation and related fields, and is positioned to give a snapshot of the current state of the art in sensing technology, particularly from the applied perspective.  The book is intended to give a broad overview of the latest developments, in addition to discussing the process through which researchers go through in order to develop sensors, or related systems, which will become more widespread in the future.  

  15. The status of food irradiation technology

    International Nuclear Information System (INIS)

    Sivinski, J.S.

    1989-01-01

    Irradiation is a mature technology for many uses, such as medical product sterilization, crosslinking of plastics, application of coatings, stabilization of natural and synthetic rubbers prior to vulcanization, and in plant genetics. It also has many potential applications in the food and agriculture industries, especially in the postharvest activities associated with processing, storing, and distribution and in utilization and consumption. The safety of food irradiation has been thoroughly studied and established by distinguished scientists of international stature and unimpeachable credentials. Approximately 30 countries permit food irradiation and it is commercially used in 21. Parasites are of serious concern since their impact on human health and economic productivity is significant, especially in developing countries with sanitation and food control problems. Parasites in meat and fish can be rendered sterile or inactivated with irradiation, and the potential for improved human health is significant. The second area for immediate use of irradiation is in meeting plant quarantine requirements. The benefits described above and the approval of the scientific community are moving the technology toward greater utilization

  16. 1982 annual status report: thermonuclear fusion technology

    International Nuclear Information System (INIS)

    1982-01-01

    The objective of this programme is to study the technological problems related to ''Post Jet'' experimental machines and, in a longer range, to assess the engineering aspects of Fusion Power Reactor Plants. According to the decision taken by the Council of Ministers on the JRC multiannual programme (1980-1983), the work performed on 1982 concerns four projects, namely: The Project 1: ''Fusion Reactor Studies''concerns mainly the NET (Next European Torus) studies which have been continued in the framework of the European participation to INTOR (INternational TOkamak Reactor). This represents a collaborative effort to design a major fusion experiment beyond the-upcoming generation of large tokamaks. The Project 2: ''Blanket Technology'' has the aim to investigate the behaviour of blanket materials in fusion conditions. The Project 3: ''Materials Sorting and Development'' has the aim to assess the mechanical properties and radiation damage of standard and advanced materials suited for structures, in particular for application as first wall of the fusion reactors. The Project 4: ''Cyclotron Operation and Experiments''has the task to exploit a cyclotron to simulate radiation damages to materials in a fusion ambient

  17. Satellite tracking of radioactive shipments - High technology solution to tough institutional problems

    International Nuclear Information System (INIS)

    Harmon, L.H.; Grimm, P.D.

    1987-01-01

    Three troublesome institutional issues face every large-quantity radioactive materials shipment. They are routing, pre-notification, and emergency response. The Transportation Communications System (TRANSCOM), under development by DOE, is based on a rapidly developing technology to determine geographical location using geo-positioning satellite systems. This technology will be used to track unclassified radioactive materials shipments in real-time. It puts those charged with monitoring transportation status on top of very shipment. Besides its practical benefits in the areas of logistics planning and execution, it demonstrates emergency preparedness has indeed been considered and close monitoring is possible. This paper describes TRANSCOM in its technical detail and DOE plans and policy for its implementation. The state of satellite positioning technology and its business future is also discussed

  18. The status of beryllium technology for fusion

    Energy Technology Data Exchange (ETDEWEB)

    Scaffidi-Argentina, F.; Longhurst, G.R. E-mail: gx1@inel.gov; Shestakov, V.; Kawamura, H

    2000-12-01

    Beryllium was used for a number of years in the Joint European Torus (JET), and it is planned to be used extensively on the lower heat-flux surfaces of the reduced technical objective/reduced cost international thermonuclear experimental reactor (RTO/RC ITER). It has been included in various forms in a number of tritium breeding blanket designs. There are technical advantages but also a number of safety issues associated with the use of beryllium. Research in a variety of technical areas in recent years has revealed interesting issues concerning the use of beryllium in fusion. Progress in this research has been presented at a series of International Workshops on Beryllium Technology for Fusion. The most recent workshop was held in Karlsruhe, Germany on 15-17 September 1999. In this paper, a summary of findings presented there and their implications for the use of beryllium in the development of fusion reactors are presented.

  19. The status of beryllium technology for fusion

    International Nuclear Information System (INIS)

    Scaffidi-Argentina, F.; Longhurst, G.R.; Shestakov, V.; Kawamura, H.

    2000-01-01

    Beryllium was used for a number of years in the Joint European Torus (JET), and it is planned to be used extensively on the lower heat-flux surfaces of the reduced technical objective/reduced cost international thermonuclear experimental reactor (RTO/RC ITER). It has been included in various forms in a number of tritium breeding blanket designs. There are technical advantages but also a number of safety issues associated with the use of beryllium. Research in a variety of technical areas in recent years has revealed interesting issues concerning the use of beryllium in fusion. Progress in this research has been presented at a series of International Workshops on Beryllium Technology for Fusion. The most recent workshop was held in Karlsruhe, Germany on 15-17 September 1999. In this paper, a summary of findings presented there and their implications for the use of beryllium in the development of fusion reactors are presented

  20. Status of SOFCo SOFC technology development

    Energy Technology Data Exchange (ETDEWEB)

    Privette, R.; Perna, M.A.; Kneidel, K. [SOFCo, Alliance, OH (United States)] [and others

    1996-12-31

    SOFCo, a Babcock & Wilcox/Ceramatec Research & Development Limited Partnership, is a collaborative research and development venture to develop technologies related to planar, solid-oxide fuel cells (SOFCs). SOFCo has successfully demonstrated a kW-class, solid-oxide fuel cell module operating on pipeline natural gas. The SOFC system design integrates the air preheater and the fuel processor with the fuel cell stacks into a compact test unit; this is the platform for multi-kW modules. The cells, made of tape-cast zirconia electrolyte and conventional electrode materials, exhibit excel lent stability in single-cell tests approaching 40,000 hours of operation. Stack tests using 10-cm and 15-cm cells with ceramic interconnects also show good performance and stability in tests for many thousands of hours.

  1. Diamond Detector Technology: Status and Perspectives

    CERN Document Server

    Reichmann, M; Artuso, M; Bachmair, F; Bäni, L; Bartosik, M; Beacham, J; Beck, H; Bellini, V; Belyaev, V; Bentele, B; Berdermann, E; Bergonzo, P; Bes, A; Brom, J-M; Bruzzi, M; Cerv, M; Chiodini, G; Chren, D; Cindro, V; Claus, G; Collot, J; Cumalat, J; Dabrowski, A; D'Alessandro, R; Dauvergne, D; de Boer, W; Dorfer, C; Dünser, M; Eremin, V; Eusebi, R; Forcolin, G; Forneris, J; Frais-Kölbl, H; Gallin-Martel, L; Gallin-Martel, M L; Gan, K K; Gastal, M; Giroletti, C; Goffe, M; Goldstein, J; Golubev, A; Gorišek, A; Grigoriev, E; Grosse-Knetter, J; Grummer, A; Gui, B; Guthoff, M; Haughton, I; Hiti, B; Hits, D; Hoeferkamp, M; Hofmann, T; Hosslet, J; Hostachy, J-Y; Hügging, F; Hutton, C; Jansen, H; Janssen, J; Kagan, H; Kanxheri, K; Kasieczka, G; Kass, R; Kassel, F; Kis, M; Konovalov, V; Kramberger, G; Kuleshov, S; Lacoste, A; Lagomarsino, S; Lo Giudice, A; Lukosi, E; Maazouzi, C; Mandic, I; Mathieu, C; Menichelli, M; Mikuž, M; Morozzi, A; Moss, J; Mountain, R; Murphy, S; Muškinja, M; Oh, A; Oliviero, P; Passeri, D; Pernegger, H; Perrino, R; Picollo, F; Pomorski, M; Potenza, R; Quadt, A; Re, A; Riley, G; Roe, S; Sanz-Becerra, D A; Scaringella, M; Schaefer, D; Schmidt, C J; Schnetzer, S; Sciortino, S; Scorzoni, A; Seidel, S; Servoli, L; Smith, S; Sopko, B; Sopko, V; Spagnolo, S; Spanier, S; Stenson, K; Stone, R; Sutera, C; Tannenwald, B; Taylor, A; Traeger, M; Tromson, D; Trischuk, W; Tuve, C; Uplegger, L; Velthuis, J; Venturi, N; Vittone, E; Wagner, S; Wallny, R; Wang, J C; Weingarten, J; Weiss, C; Wengler, T; Wermes, N; Yamouni, M; Zavrtanik, M

    2018-01-01

    The planned upgrade of the LHC to the High-Luminosity-LHC will push the luminosity limits above the original design values. Since the current detectors will not be able to cope with this environment ATLAS and CMS are doing research to find more radiation tolerant technologies for their innermost tracking layers. Chemical Vapour Deposition (CVD) diamond is an excellent candidate for this purpose. Detectors out of this material are already established in the highest irradiation regimes for the beam condition monitors at LHC. The RD42 collaboration is leading an effort to use CVD diamonds also as sensor material for the future tracking detectors. The signal behaviour of highly irradiated diamonds is presented as well as the recent study of the signal dependence on incident particle flux. There is also a recent development towards 3D detectors and especially 3D detectors with a pixel readout based on diamond sensors.

  2. 1981 Annual Status Report: thermonuclear fusion technology

    International Nuclear Information System (INIS)

    1982-01-01

    The work perfomed on 1981 concerns four projects, namely: - The project 1: ''Reactor Studies''. During 1981 this activity was made in support to the European participation to the INTOR (INternational TOkamak Reactor) studies. This represents a collaborative effort among Europe, Japan; USA and USSR, under the auspices of IAEA, to design a major fusion experiment beyond the upcoming generation of large tokamaks. - The Project 2: ''Blanket Technology'' has the aim to investigate the behaviour of blanket materials in fusion conditions. - The Project 3: ''Materials Sorting and Development'' has the aim to assess the mechanical properties and radiation damage of standard and advanced materials suited for structures, in particular for application as first wall of the fusion reactors. - The Project 4: ''Cyclotron Operation and Experiments'' has the task to exploit a cyclotron to simulate radiation damages to materials in a fusion ambient

  3. Status of Fast Reactor Research and Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-04-01

    In 1985, the International Atomic Energy Agency (IAEA) published a report titled 'Status of Liquid Metal Cooled Fast Breeder Reactors' (Technical Reports Series No. 246). The report was a general review of the status of fast reactor development at that time, covering some aspects of design and operation and reviewing experience from the earliest days. It summarized the programmes and plans in all countries which were pursuing the development of fast reactors. In 1999, the IAEA published a follow-up report titled 'Status of Liquid Metal Cooled Fast Reactor Technology' (IAEA-TECDOC-1083), necessitated by the substantial advances in fast reactor technology development and changes in the economic and regulatory environment which took place during the period of 1985-1998. Chief among these were the demonstration of reliable operation by several prototypes and experimental reactors, the reliable operation of fuel at a high burnup and the launch of new fast reactor programmes by some additional Member States. In 2006, the Technical Working Group on Fast Reactors (TWG-FR) identified the need to update its past publications and recommended the preparation of a new status report on fast reactor technology. The present status report intends to provide comprehensive and detailed information on the technology of fast neutron reactors. The focus is on practical issues that are useful to engineers, scientists, managers, university students and professors, on the following topics: experience in construction, operation and decommissioning; various areas of research and development; engineering; safety; and national strategies and public acceptance of fast reactors.

  4. Status of Fast Reactor Research and Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-07-01

    In 1985, the International Atomic Energy Agency (IAEA) published a report titled 'Status of Liquid Metal Cooled Fast Breeder Reactors' (Technical Reports Series No. 246). The report was a general review of the status of fast reactor development at that time, covering some aspects of design and operation and reviewing experience from the earliest days. It summarized the programmes and plans in all countries which were pursuing the development of fast reactors. In 1999, the IAEA published a follow-up report titled 'Status of Liquid Metal Cooled Fast Reactor Technology' (IAEA-TECDOC-1083), necessitated by the substantial advances in fast reactor technology development and changes in the economic and regulatory environment which took place during the period of 1985-1998. Chief among these were the demonstration of reliable operation by several prototypes and experimental reactors, the reliable operation of fuel at a high burnup and the launch of new fast reactor programmes by some additional Member States. In 2006, the Technical Working Group on Fast Reactors (TWG-FR) identified the need to update its past publications and recommended the preparation of a new status report on fast reactor technology. The present status report intends to provide comprehensive and detailed information on the technology of fast neutron reactors. The focus is on practical issues that are useful to engineers, scientists, managers, university students and professors, on the following topics: experience in construction, operation and decommissioning; various areas of research and development; engineering; safety; and national strategies and public acceptance of fast reactors.

  5. Status of Fast Reactor Research and Technology Development

    International Nuclear Information System (INIS)

    2012-01-01

    In 1985, the International Atomic Energy Agency (IAEA) published a report titled 'Status of Liquid Metal Cooled Fast Breeder Reactors' (Technical Reports Series No. 246). The report was a general review of the status of fast reactor development at that time, covering some aspects of design and operation and reviewing experience from the earliest days. It summarized the programmes and plans in all countries which were pursuing the development of fast reactors. In 1999, the IAEA published a follow-up report titled 'Status of Liquid Metal Cooled Fast Reactor Technology' (IAEA-TECDOC-1083), necessitated by the substantial advances in fast reactor technology development and changes in the economic and regulatory environment which took place during the period of 1985-1998. Chief among these were the demonstration of reliable operation by several prototypes and experimental reactors, the reliable operation of fuel at a high burnup and the launch of new fast reactor programmes by some additional Member States. In 2006, the Technical Working Group on Fast Reactors (TWG-FR) identified the need to update its past publications and recommended the preparation of a new status report on fast reactor technology. The present status report intends to provide comprehensive and detailed information on the technology of fast neutron reactors. The focus is on practical issues that are useful to engineers, scientists, managers, university students and professors, on the following topics: experience in construction, operation and decommissioning; various areas of research and development; engineering; safety; and national strategies and public acceptance of fast reactors.

  6. Status of Fast Reactor Research and Technology Development

    International Nuclear Information System (INIS)

    2013-01-01

    In 1985, the International Atomic Energy Agency (IAEA) published a report titled 'Status of Liquid Metal Cooled Fast Breeder Reactors' (Technical Reports Series No. 246). The report was a general review of the status of fast reactor development at that time, covering some aspects of design and operation and reviewing experience from the earliest days. It summarized the programmes and plans in all countries which were pursuing the development of fast reactors. In 1999, the IAEA published a follow-up report titled 'Status of Liquid Metal Cooled Fast Reactor Technology' (IAEA-TECDOC-1083), necessitated by the substantial advances in fast reactor technology development and changes in the economic and regulatory environment which took place during the period of 1985-1998. Chief among these were the demonstration of reliable operation by several prototypes and experimental reactors, the reliable operation of fuel at a high burnup and the launch of new fast reactor programmes by some additional Member States. In 2006, the Technical Working Group on Fast Reactors (TWG-FR) identified the need to update its past publications and recommended the preparation of a new status report on fast reactor technology. The present status report intends to provide comprehensive and detailed information on the technology of fast neutron reactors. The focus is on practical issues that are useful to engineers, scientists, managers, university students and professors, on the following topics: experience in construction, operation and decommissioning; various areas of research and development; engineering; safety; and national strategies and public acceptance of fast reactors.

  7. Technologies of polytechnic education in global benchmark higher education institutions

    Science.gov (United States)

    Kurushina, V. A.; Kurushina, E. V.; Zemenkova, M. Y.

    2018-05-01

    The Russian polytechnic education is going through the sequence of transformations started with introduction of bachelor and master degrees in the higher education instead of the previous “specialists”. The next stage of reformation in the Russian polytechnic education should imply the growth in quality of teaching and learning experience that is possible to achieve by accumulating the best education practices of the world-class universities using the benchmarking method. This paper gives an overview of some major distinctive features of the foreign benchmark higher education institution and the Russian university of polytechnic profile. The parameters that allowed the authors to select the foreign institution for comparison include the scope of educational profile, industrial specialization, connections with the leading regional corporations, size of the city and number of students. When considering the possibilities of using relevant higher education practices of the world level, the authors emphasize the importance of formation of a new mentality of an engineer, the role of computer technologies in engineering education, the provision of licensed software for the educational process which exceeds the level of a regional Russian university, and successful staff technologies (e.g., inviting “guest” lecturers or having 2-3 lecturers per course).

  8. Cellulosic ethanol. Potential, technology and development status

    Energy Technology Data Exchange (ETDEWEB)

    Rarbach, M. [Sued-Chemie AG, Muenchen (Germany)

    2012-07-01

    In times of rising oil prices and a growing energy demand, sustainable alternative energy sources are needed. Cellulosic ethanol is a sustainable biofuel, made from lignocellulosic feedstock such as agricultural residues (corn stover, cereal straw, bagasse) or dedicated energy crops. Its production is almost carbon neutral, doesn't compete with food or feed production and induces no land use changes. It constitutes a new energy source using an already existing renewable feedstock without needing any further production capacity and can thus play a major role on the way to more sustainability in transport and the chemical industry and reducing the dependence on the import of fossil resources. The potential for cellulosic ethanol is huge: In the US, the annual production of agricultural residues (cereal straw and corn stover) reached almost 384 million tons in 2009 and Brazil alone produced more than 670 million tons of sugar cane in 2009 yielding more than 100 million tons of bagasse (dry basis). And alone in the European Union, almost 300 million tons of crop straw are produced annually. The last years have seen success in the development and deployment in the field of cellulosic ethanol production. The main challenge thereby remains to demonstrate that the technology is economically feasible for the up-scaling to industrial scale. Clariant has developed the sunliquid {sup registered} process, a proprietary cellulosic ethanol technology that reaches highest greenhouse gas (GHG) emission savings while cutting production costs to a minimum. The sunliquid {sup registered} process for cellulosic ethanol matches the ambitious targets for economically and ecologically sustainable production and greenhouse gas reduction. It was developed using an integrated design concept. Highly optimized, feedstock and process specific biocatalysts and microorganisms ensure a highly efficient process with improved yields and feedstock-driven production costs. Integrated, on

  9. 1980 Annual status report: thermonuclear fusion technology

    International Nuclear Information System (INIS)

    1981-01-01

    According to the decisions taken by the Council of Ministers on the JRC multiannual programme (1980-83), the 1980 activity has been oriented toward four projects which cover a broad range of fields, namely: - the Project 1: 'Reactor Studies'. The main effort was oriented toward the NET/INTOR studies. JRC Ispra is acting as reference nucleus for NET preliminary design. For the moment being this work was made in support to the European participation to INTOR. In 1980 the conceptual design of a demonstration power reactor (FINTOR-D) was also achieved. - The Project 2: 'Blanket Technology' has the aim to investigate structural materials behaviour in fusion conditions. Items like tritium outgassing and permeation from structurals an materials compatibility were investigated. - The Projet 3: 'Material sorting and development'. Its aim is to assess mechanical properties and radiation damage of standard and advanced materials suited for reactor structures. - The Projet 4: 'Cyclotron construction and operation' has the task to install and exploit a cyclotron to simulate demages to materials in a fusion ambient

  10. Update on status of fluidized-bed combustion technology

    International Nuclear Information System (INIS)

    Stallings, J.; Boyd, T.; Brown, R.

    1992-01-01

    During the 1980s, fluidized-bed combustion technology has become the dominant technology for solid-fuel-fired power generation systems in the United States. Atmospheric fluidized beds as large as 160 MWe in capacity are now in operation, while pressurized systems reaching 80 MWe have started up in the last year. The commercial status, boiler performance, emissions, and future developments for both atmospheric and pressurized fluidized-bed combustion systems are discussed

  11. DIDACTIC POTENTIAL OF CLOUD TECHNOLOGIES FOR MENAGMENT OF EDUCATIONAL INSTITUTION

    Directory of Open Access Journals (Sweden)

    А А Заславский

    2016-12-01

    Full Text Available The article introduces the basic definitions and differences between Services in the cloud, cloud services, cloud applications and cloud storage data. The basic cloud types that can be used on the Internet and the LAN of educational organization (Intranet. Possibilities of use of cloud services to improve of effective management at educational organization of internal and external communications of educational organizations, as well as to ensure joint work of employees of the educational organization.A list of core competencies an employee of an educational organization, which will be developed for use in the activity of cloud services and cloud applications. We describe the positive aspects of the use of cloud services and cloud-based technologies for the management of the educational institution, identifies possible risks of using cloud technologies, presents options for the use of cloud technology over the Internet and the Intranet network. We present a list of software included with every category of cloud services described types: storage and file synchronization, storage of bookmarks and notes, time management, software applications. At the article is introduced the basic definition and classification of cloud services, offered examples of methodical use of cloud services in the management of the educational organization.

  12. Imagine Astronomy at the Rochester Institute of Technology

    Science.gov (United States)

    Rapson, Valerie; Almeyda, T.; Freeman, M.; Lena, D.; Principe, D.; Punzi, K.; Sargent, B. A.; Vaddi, S.; Vazquez, B.; Vorobiev, D.

    2014-01-01

    The Imagine RIT Innovation and Creativity Festival is an annual free event held each year on the campus of the Rochester Institute of Technology (RIT). The purpose of the festival is to showcase the work and research conducted by students and faculty at RIT, and get the public excited about science and technology. For the past three years, graduate students, post-docs and faculty in the Astrophysical Sciences and Technology graduate program at RIT have participated in the festival by showcasing their astronomy research in a fun, interactive and hands on way. We have presented work conducted with various telescopes in the fields of star formation and galaxy evolution. Here, we present our three unique exhibits and the public’s reception to each exhibit. We found that interactive games such as astro-trivia, and hands on activities such as building a scale model of the Hubble Space Telescope were the most exciting for visitors. Interactive pieces of the exhibit in general acquired the most attention, whereas posters and videos, despite their pictorial nature, were not as well received. The most successful piece of our exhibit each year has been solar observing through eclipse glasses and telescopes. Most people who observed the sun at our exhibit were left awe-struck because this was their first experience viewing an astronomical object through a telescope. We plan to improve upon our exhibit by introducing more hands-on activities that will engage the public in current astronomy research at RIT.

  13. How and Why Higher Education Institutions Use Technology in Developmental Education Programming. A CAPR Working Paper

    Science.gov (United States)

    Natow, Rebecca S.; Reddy, Vikash; Grant, Markeisha

    2017-01-01

    As postsecondary institutions increasingly integrate technology into developmental education, it becomes important to understand how technology is used in these programs, what challenges institutions have encountered relating to the technology, and what considerations institutional leaders take into account when deciding whether and how to…

  14. Status of biomass fuels technologies research in the US

    Energy Technology Data Exchange (ETDEWEB)

    Koontz, R.P.; Parker, S.; Glenn, B.

    1984-07-01

    Biomass is a tremendous potential source of fuel and chemical feedstocks. The US Department of Energy has sponsored a broad spectrum of research on biomass at various US government laboratories, private installations, and universities. The status of biomass fuels technologies research in the US is discussed.

  15. Optics and communication technology major of physics undergraduate degree at King Mongkut's Institute of Technology Ladkrabang

    Science.gov (United States)

    Buranasiri, Prathan

    2014-09-01

    A physics undergraduate degree major in optics and communication technology has been offered at King Mongkut's Institute of Technology Ladkrabang (KMITL), Bangkok, Thailand. There are nine required three credit hour courses including two laboratory courses plus a number of selections in optics and communication based technology courses. For independent thinking and industrial working skills, nine credit hours of research project, practical training or overseas studies are included for selection in the final semester. Students are encouraged to participate in international conferences and professional organizations. Recently the program, with support from SPIE and OSA, has organized its first international conference on photonic solutions 2013 (ICPS 2013).

  16. Progress Twining Program at Shibaura Institute of Technology

    Science.gov (United States)

    Komeda, Takashi

    The Shibaura Institute of Technology (SIT) conducts two Twinning Programs. One is Malaysian Twinning Program, which is conducted in cooperation with 15 Japanese universities, and has SIT as its organizing member. The other is Hybrid Twinning Program, which is conducted with partner foreign universities, and is a graduate study program combining Masters and Doctoral programs. Two important reasons for conducting these twinning programs are to increase the number of foreign students studying in Japan and to promote friendly relations with various Asian countries. Twinning program is effective in enrolling students early and in lowering the cost of foreign study. Japanese students benefit too from good influence of interaction with students having a different culture and customs.

  17. Basic principles of information technology organization in health care institutions.

    Science.gov (United States)

    Mitchell, J A

    1997-01-01

    This paper focuses on the basic principles of information technology (IT) organization within health sciences centers. The paper considers the placement of the leader of the IT effort within the health sciences administrative structure and the organization of the IT unit. A case study of the University of Missouri-Columbia Health Sciences Center demonstrates how a role-based organizational model for IT support can be effective for determining the boundary between centralized and decentralized organizations. The conclusions are that the IT leader needs to be positioned with other institutional leaders who are making strategic decisions, and that the internal IT structure needs to be a role-based hybrid of centralized and decentralized units. The IT leader needs to understand the mission of the organization and actively use change-management techniques.

  18. History, Status and Prospects on Development of Pyroprocess Technology

    International Nuclear Information System (INIS)

    Kim, Eung Ho; Lee, Han Soo; Park, Geunil; Seo, Chungseok; Ko, Wonil; Kim, Hodong; Choi, Jongwon

    2013-01-01

    The objective of this study is to evaluate prospects for a practical use of pyroprocess through analysis of current issues and status of pyroprocess technology development being performed at domestic and abroad. Following Fukushima accident, awareness about nuclear safety is further increasing and problems on safe management of used nuclear fuel has emerged as well. So, nuclear industrialized countries are developing recycling technology of used nuclear fuel, significantly reducing used fuel inventory that have cumulated. In this respects, there is a need to comprehensively summarize the technology developed at KAERI until now. In addition to, the current issues of pyroprocess for future R and D are suggested

  19. The radiation accident at Institute for Energy Technology Sept. 1982

    International Nuclear Information System (INIS)

    Berteig, L.; Flatby, J.

    1983-01-01

    On September 2, 1982 a radiation accident with overexposure of one person happened at the gamma irradiation plant at Institute for Energy Technology, Kjeller, Norway. This person died from the radiation injury 13 days later. In the report reference is made to the work of different groups and bodies in connection with the accident. An analysis of the causes of the accident is given. For admittance control to the irradiation area there were generally two independent door interlock systems, one irradiation source position related and the other radiation related. The latter was dismantled for repair at the time of the accident. A micro-switch failure left the source in an ushielded position, initiated a green light on the control panel and released the interlock system of the door. According to working instructions a mobile radiation monitor should have been checked for proper function and carried by anyone entering the irradiation room. This seems not to have been carried out correctly. The conditions set forth by the Norwegian Institute of Radiation Hygiene for the restarting of the irradiation plant are presented. (RF)

  20. Current Status of Advanced Nuclear Fuel Cycle technologies

    International Nuclear Information System (INIS)

    Hwang, Yong Soo; Lee, Jong Hyun

    2009-07-01

    To expand the use of nuclear energy, SNF from nuclear power plants must be managed in a safe and environmental friendly and the problem of decreasing uranium should be solved. To resolve this, a dry processing technology Pyroprocessing is focused on. The government started to develop of Pyroprocessing technology in 1997. According to the decision of government based of Atomic Energy Commission in December 2008, the Korea Atomic Energy Research Institute will construct PRIDE (Pyroprocess Integrated Inactive DEmonstration Facility) by 2011 to prove a consistent process. If Pyroprocessing technology will be developed in the near future, the size of radioactive waste disposal site can be reduced to 100 times compared to the direct disposal. When this technology will be connected to Fast Reactor. high level nuclear waste management of Hundreds of thousands of years may be reduced to hundreds years. However for the commercialization of Pyroprocessing technology, there are some problems to solve. First, because of none commercial facilities in the world of executive experience, so that the facility design, measurement. management and material flow, the critical need for data accumulation. Second, High-level nuclear waste have been known to generate more than the wet methods, it should continue to reduce technology development. In addition, a careful consideration of the residual uranium generating on process also can maximize the efficiency of reducing. The new concept is being developed in Korea Atomic Energy Research Institute Pyroprocessing technology and nuclear waste processing technology to overcome these drawbacks sUQQested a way

  1. [Study on the status of institutional delivery and its determinants in rural Guangxi autonomous region].

    Science.gov (United States)

    Li, Jian; Chen, Li-Li; Chen, Shu-Zhen; Cen, Ming-Yang; Zhao, Nai-Qing; Qian, Xu

    2008-03-01

    To understand the situation of institutional delivery of rural pregnant women in Guangxi Autonomous Region in the period of 1998 - 2003 and to identify the determinants on institutional delivery utilization. Using Andersen's behavioral model as analytical framework and Guangxi databank of the 3rd National Health Service Survey as data source, we described the status of institutional delivery with the rural women having had live birth history in the period of 1998 - 2003 as subjects, while and the univariate analysis and multivariate logistic analysis were done to identify determinants of institutional delivery utilization. Among a total number of 407 women with live birth history, 39.80 percent of them delivered at the health-care facilities. The rate of institutional delivery increased annually in 1998 - 2003 (Pdelivery in township health centers increased and the proportion of home delivery decreased by year (Pdelivery etc. were determinants of delivery utilization. The OR value were 1.749 for multipara, 1.995 for those going to the nearest healthcare facilities by the most convenient traffic in less than 10 minutes, 3.011 for those drinking tap water, 5.435 for those with the education of high school, 29.149 for those with over 5 times in terms of frequency of prenatal checkup and 37.822 for those being advocated on institutional delivery. Socio-economic situation, status of maternal health care and parity made main contribution to institutional delivery and skilled birth attendance for women in rural Guangxi.

  2. Institutional Advancement: A Marketing Perspective. Part II: A Status Report, 1978-79.

    Science.gov (United States)

    Moriarty, Daniel F.

    This follow-up report examines the status of the recruitment and retention strategies implemented by Triton College in 1978 as part of an effort to utilize the marketing concept in identifying and meeting changing educational needs. The report first provides operational definitions for "institutional advancement,""marketing concept,""promotion,"…

  3. Scientific Research in Jordanian Higher Education Institutions: An Evaluation of the Status and Obstacles

    Science.gov (United States)

    bin Tareef, Atif

    2009-01-01

    This study aimed at identifying the status and obstacles of scientific research in Jordanian higher education institutions. And defined by being an attempt to increase faculty member's, researcher's and educational leader's attention to the necessity of improving research planning or strategies, professional development, working conditions,…

  4. Education and occupational status in 14 countries: the role of educational institutions and labour market coordination

    NARCIS (Netherlands)

    Andersen, R.; van de Werfhorst, H.G.

    2010-01-01

    This article explores the role of national institutional factors - more specifically, the level of skill transparency of the education system and labour market coordination - in accounting for cross-national differences in the relationship between education and occupational status. Consistent with

  5. Activities of Japan Nuclear Technology Institute Japanese TSO of Industry

    International Nuclear Information System (INIS)

    Nagata, T.

    2010-01-01

    Nuclear energy is a superior form of energy in that it delivers stable power supplies and counters global warming, and it is important to promote nuclear power generation as the core power sources for a nation. However, the Japanese environment surrounding nuclear energy is changing drastically, following the liberalization of market and recent series of troubles or falsifications shaking public confidence in nuclear energy. In the above mentioned situation, nuclear industries and organizations must fulfill their individual roles, and amass its strength to work toward enhancing industry initiatives for safety activities, securing safe / stable plant operations, restoring public confidence and initiate revitalization of nuclear energy operations. The Japan Nuclear Technology Institute (JANTI) has been established as a new entity for supporting and leading the industry's further progress in March 2005. Members of JANTI are not only utilities but also component manufacturers and constructors. JANTI enhance the technological foundation of nuclear energy based on scientific and rational data, coordinates its use among a wide range of relevant organizations, and helps members enhance their voluntary safety activities. At the same time, it is independent of utilities, and exercises a function of checking industry at the objective, third-party standpoint. As for the activities of JANTI itself, information disclosure and the establishment of a council comprising external members will enhance administration transparency. (author)

  6. Perfect Power Prototype for Illinois Institute of Technology

    Energy Technology Data Exchange (ETDEWEB)

    Shahidehpour, Mohammad [Illinois Inst. Of Technology, Chicago, IL (United States)

    2014-09-30

    Starting in October 2008, Illinois Institute of Technology (IIT), in collaboration with over 20 participating members, led an extensive effort to develop, demonstrate, promote, and commercialize a microgrid system and offer supporting technologies that will achieve Perfect Power at the main campus of IIT. A Perfect Power system, as defined by the Galvin Electricity Initiative (GEI), is a system that cannot fail to meet the electric needs of the individual end-user. The Principle Investigator of this Perfect Power project was Dr. Mohammad Shahidehpour, Director of the Robert W. Galvin Center for Electricity Innovation at IIT. There were six overall objectives of the Perfect Power project: (1) Demonstrate the higher reliability introduced by the microgrid system at IIT; (2) Demonstrate the economics of microgrid operations; (3) Allow for a decrease of fifty percent (50%) of grid electricity load; (4) Create a permanent twenty percent (20%) decrease in peak load from 2007 level; (5) Defer planned substation through load reduction; (6) Offer a distribution system design that can be replicated in urban communities.

  7. Status of liquid metal cooled fast reactor technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-04-01

    During the period 1985-1998, there have been substantial advances in fast reactor technology development. Chief among these has been the demonstration of reliable operation by several prototypes and experimental reactors, the reliable operation of fuel at high burnup. At the IAEA meetings on liquid metal cooled fast reactor technology (LMFR), it became evident that there have been significant technological advances as well as changes in the economic and regulatory environment since 1985. Therefore the International working group on Fast Reactors has recommended the preparation of a new status report on fast reactors. The present report intends to provide comprehensive and detailed information on LMFR technology. The focus is on practical issues that are useful to engineers, scientists, managers, university students and professors, on the following topics: experience in construction and operation, reactor physics and safety, sore structural material and fuel technology, fast reactor engineering and activities in progress on LMFR plants Refs, figs, tabs

  8. Status of liquid metal cooled fast reactor technology

    International Nuclear Information System (INIS)

    1999-04-01

    During the period 1985-1998, there have been substantial advances in fast reactor technology development. Chief among these has been the demonstration of reliable operation by several prototypes and experimental reactors, the reliable operation of fuel at high burnup. At the IAEA meetings on liquid metal cooled fast reactor technology (LMFR), it became evident that there have been significant technological advances as well as changes in the economic and regulatory environment since 1985. Therefore the International working group on Fast Reactors has recommended the preparation of a new status report on fast reactors. The present report intends to provide comprehensive and detailed information on LMFR technology. The focus is on practical issues that are useful to engineers, scientists, managers, university students and professors, on the following topics: experience in construction and operation, reactor physics and safety, sore structural material and fuel technology, fast reactor engineering and activities in progress on LMFR plants

  9. Status report on the relativistic electron beam technology

    International Nuclear Information System (INIS)

    Iyyengar, S.K.; Ron, P.H.; Rohatgi, V.K.

    1974-01-01

    The status of technology of the pulsed relativistic electron beam (REB) has been examined and summarised in this report. With the present technology the beam generator can be used either as a source of intense electron burst or to produce bursts of positive ions x and γ-rays, and neutrons by suitable secondary reactions. A large number of applications have been identified where this technology can play an important role. Typical applications of the technology include : (a) generation and heating of fusion plasma (b) development of high power laser and (c) sterilisation and radiation sources. The present day cost of radiation produced by REB is competitive with the cost of radiation produced from Co 60 source. At the same time there are indications that the cost of radiation from REB source can be significantly reduced with advanced technology. The type of equipment developed by various laboratories to study realitivistic electron beams is also included in this report. (author)

  10. Integrated Magnetic MEMS Relays: Status of the Technology

    Directory of Open Access Journals (Sweden)

    Giuseppe Schiavone

    2014-08-01

    Full Text Available The development and application of magnetic technologies employing microfabricated magnetic structures for the production of switching components has generated enormous interest in the scientific and industrial communities over the last decade. Magnetic actuation offers many benefits when compared to other schemes for microelectromechanical systems (MEMS, including the generation of forces that have higher magnitude and longer range. Magnetic actuation can be achieved using different excitation sources, which create challenges related to the integration with other technologies, such as CMOS (Complementary Metal Oxide Semiconductor, and the requirement to reduce power consumption. Novel designs and technologies are therefore sought to enable the use of magnetic switching architectures in integrated MEMS devices, without incurring excessive energy consumption. This article reviews the status of magnetic MEMS technology and presents devices recently developed by various research groups, with key focuses on integrability and effective power management, in addition to the ability to integrate the technology with other microelectronic fabrication processes.

  11. Technology of silicon charged-particle detectors developed at the Institute of Electron Technology (ITE)

    Science.gov (United States)

    Wegrzecka, Iwona; Panas, Andrzej; Bar, Jan; Budzyński, Tadeusz; Grabiec, Piotr; Kozłowski, Roman; Sarnecki, Jerzy; Słysz, Wojciech; Szmigiel, Dariusz; Wegrzecki, Maciej; Zaborowski, Michał

    2013-07-01

    The paper discusses the technology of silicon charged-particle detectors developed at the Institute of Electron Technology (ITE). The developed technology enables the fabrication of both planar and epiplanar p+-ν-n+ detector structures with an active area of up to 50 cm2. The starting material for epiplanar structures are silicon wafers with a high-resistivity n-type epitaxial layer ( ν layer - ρ < 3 kΩcm) deposited on a highly doped n+-type substrate (ρ< 0,02Ωcm) developed and fabricated at the Institute of Electronic Materials Technology. Active layer thickness of the epiplanar detectors (νlayer) may range from 10 μm to 150 μm. Imported silicon with min. 5 kΩcm resistivity is used to fabricate planar detectors. Active layer thickness of the planar detectors (ν) layer) may range from 200 μm to 1 mm. This technology enables the fabrication of both discrete and multi-junction detectors (monolithic detector arrays), such as single-sided strip detectors (epiplanar and planar) and double-sided strip detectors (planar). Examples of process diagrams for fabrication of the epiplanar and planar detectors are presented in the paper, and selected technological processes are discussed.

  12. [Construction and operation status of management system of laboratories of schistosomiasis control institutions in Hubei Province].

    Science.gov (United States)

    Zhao-Hui, Zheng; Jun, Qin; Li, Chen; Hong, Zhu; Li, Tang; Zu-Wu, Tu; Ming-Xing, Zeng; Qian, Sun; Shun-Xiang, Cai

    2016-10-09

    To analyze the construction and operation status of management system of laboratories of schistosomiasis control institutions in Hubei Province, so as to provide the reference for the standardized detection and management of schistosomiasis laboratories. According to the laboratory standard of schistosomiasis at provincial, municipal and county levels, the management system construction and operation status of 60 schistosomiasis control institutions was assessed by the acceptance examination method from 2013 to 2015. The management system was already occupied over all the laboratories of schistosomiasis control institutions and was officially running. There were 588 non-conformities and the inconsistency rate was 19.60%. The non-conformity rate of the management system of laboratory quality control was 38.10% (224 cases) and the non-conformity rate of requirements of instrument and equipment was 23.81% (140 cases). The management system has played an important role in the standardized management of schistosomiasis laboratories.

  13. Status and prospect of radiation processing technology in Malaysia

    Energy Technology Data Exchange (ETDEWEB)

    Khairul Zaman Hj. Mohd Dahlan; Nahrul Khair Alang Md Rashid [Malaysian Institute for Nuclear Technology Research (MINT), Bangi, Selangor Darul Ehsan (Malaysia)

    2001-03-01

    Radiation processing technology in Malaysia is gaining acceptance by the local industry. The technology has proven to enhance the industrial efficiency, productivity and improve product quality and competitiveness. For many years, variety of radiation crosslinkable materials based on synthetic polymers have been produced either in the form of thermoplastic resins, polymer blends or composites. Today, effort is being focused towards producing environmentally friendly and biodegradable materials using natural polymers. The government of Malaysia through the Malaysian Institute for Nuclear Technology Research (MINT) has developed research program to utilize indigenous materials such as natural rubber, palm oil and polysaccharide. Radiation processing technology is used to process (crosslink/grafting/curing) the materials at a competitive cost. This technology can be applied in several industrial sectors such as automobile, aerospace, construction and healthcare. (author)

  14. Status and prospect of radiation processing technology in Malaysia

    International Nuclear Information System (INIS)

    Khairul Zaman Hj Mohd Dahlan; Nahrul Khair Alang Md Rashid

    2001-01-01

    Radiation processing technology in Malaysia is gaining acceptance by the local industry. The technology has proven to enhance the industrial efficiency, productivity and improve product quality and competitiveness. For many years, variety of radiation crosslinkable materials based on synthetic polymers have been produced either in the form of thermoplastic resins, polymer blends or composites. Today, effort is being focused towards producing environmentally friendly and biodegradable materials using natural polymers. The government of Malaysia through the Malaysian Institute for Nuclear Technology Research (MINT) has developed research program to utilize indigenous materials such as natural rubber, palm oil and polysaccharide. Radiation processing technology is used to process (crosslink/grafting/curing) the materials at a competitive cost. This technology can be applied in several industrial sectors such as automobile, aerospace, construction and healthcare. (author)

  15. Status of molten carbonate fuel cell technology development

    Science.gov (United States)

    Parsons, E. L., Jr.; Williams, M. C.; George, T. J.

    The MCFC technology has been identified by the DOE as a promising product for commercialization. Development of the MCFC technology supports the National Energy Strategy. Review of the status of the MCFC technology indicates that the MCFC technology developers are making rapid and significant progress. Manufacturing facility development and extensive testing is occurring. Improvements in performance (power density), lower costs, improved packaging, and scale up to full height are planned. MCFC developers need to continue to be responsive to end-users in potential markets. It will be market demands for the correct product definition which will ultimately determine the character of MCFC power plants. There is a need for continued MCFC product improvement and multiple product development tests.

  16. Research Status on the Heterogeneous Sheet Connection Forming Technology

    Directory of Open Access Journals (Sweden)

    SHI Wen-yong

    2017-04-01

    Full Text Available The heterogeneous sheet connection forming is one of the effective ways to realize lightweight in many fields,such as equipment manufacturing and transportation. However, there are obvious differences in the material properties,when using the traditional connection methods,there is a certain technical bottlenecks. In this paper, the technological characteristics and research status of the welding method and mechanical connection method are discussed in detail,such as the TIC welding and the laser welding. The advantages and development potential of the technology are introduced in the field of the heterogeneous sheet connection,in combination with the industry development and the use demand,the development of the heterogeneous sheet connection technology is expected,to provide the technical support for the research and development of new heterogeneous sheet connection technology.

  17. Electron beam facilities and technologies developed in the Institute of Nuclear Chemistry and Technology

    International Nuclear Information System (INIS)

    Chmielewski, A.G.; Walis, L.; Zimek, Z.

    1992-01-01

    The operation of the first electron accelerator has been started at Institute /former Institute for Nuclear Research/ in 1971. This LAE-13/9 accelerator is a two-section lineac with adjustable energy of electrons: 5 to 13 MeV and the beam power up to 9 kW. The main technologies developed on the basis of LAE-13/9 are: sterilization, manufacturing of thermoshrinkable materials and modification of semiconductors. The accelerator is operated 4000 hours per year and used for small scale production and services in these fields. The other problems investigated in laboratory scale are: food preservation and hygenization, hygenization of municipal sewage sludge, and bio-conversion of pig-farm wastes into animal fodder. The laboratory experiments are basis for pilot construction and other industrial applications. The mentioned technology of thermoshrinkable tube production was implemented in industrial scale at ZWUT Czluchow which factory is equipped in the accelerator ILU-6 /20 kW, 2 MeV/. On the basis of similar unit a technological installation was built at Institute. The plant is furnished with a conveyer and the rewinding machines for tubes and tapes manufacturing. This allows continuous production of these materials. The plant will start operation next year and linear accelerator /10 MeV, 15 kW/ for this purpose is already delivered. The pilot plant for food preservation and hygenization has been built. It is equipped in small pilot accelerator 10 MeV, 1 kW and will be furnished with 10 MeV, 10 kW lineac this year. Beside of this technological lines Institute is furnished in Van de Graff accelerator /2, MeV, 100 μA/ and another laboratory unit LAE-10 /10 MeV, 10-100 ns 2 us/ is under construction. (J.P.N.)

  18. ZnO growth technologies: current status and perspectives

    International Nuclear Information System (INIS)

    Lupan, Oleg

    2011-01-01

    Development of new technologies for ZnO nano materials and thin films is of critical importance for further fundamental investigations and practical applications. We discuss on the main technical control of the synthesis of zinc oxide and its properties, which are of significance in understanding the growth mechanism and further developing ZnO-based devices. Next, we present a brief summary of recent research activities, current status and progress in developing improved control of technological processes for zinc oxide as advanced material.

  19. Extending the theory of realistic conflict to competition in institutional settings: intergroup status and outcome.

    Science.gov (United States)

    Echebarria-Echabe, Agustin; Guede, Emilia Fernández

    2003-12-01

    The authors analyzed the extent to which the Theory of Realistic Conflict can be extended to institutional settings in which groups are not actively involved in decisions but are passive targets of decisions taken by an institutional authority (the rector). A negative interdependence between the in-group (psychology) and a high- or low-status outgroup (engineering versus nursing) was established by an institutional authority (the rector). The competition (induced by the rector) was beneficial (an increase in the budget previously invested in the faculty) or detrimental (a decrease in the budget) for the in-group. The results confirmed that competition affects mutual attitudes, images, and behaviors of groups even if the groups are passive targets of decisions that the institutional authority makes. Moreover, competition--regardless of whether beneficial or detrimental--deteriorated images of and attitudes toward high-status out-groups. In contrast, competition improved images and opinions about low-status out-groups, but only in the loss condition.

  20. III Systems Symposium at Case Institute of Technology

    CERN Document Server

    1968-01-01

    By J OHN A. HRONES Provost, Case Institute 0/ Technology SYSTEMS have been the subject of man's study for many hundreds of years. Thus, the solar system has been the concern of the astronomer. The study of the allocation of material and human resources within the boundaries of an industrial firm or a government has been the concern of the economist. The subject of such studies have been widely known as economic systems. Medieal men have worked with the human body. Thus, man has attempted to deal with a complicated array of interconnected elements since the very earliest of recorded time. In his attcmpt to improve his understanding of physieal systems the need to concentrate on a specific kind of system, e.g., the solar system. the human body, became more imperative. However in recent years there has begun to grow and develop an increasing number of people who are working on thc development of general systems theory and analysis. Such a development is based upon the belief that certain view points, certain kin...

  1. Application of Strategic Institutional-Information Technology Alignment Model in Four-Year Institutions of Higher Education

    Science.gov (United States)

    Lach-Smith, Barbara

    2010-01-01

    This study examined an existing corporate model of business-information technology alignment for application in higher education and tested the findings by surveying executive and technology leaders in higher education. The purpose of this study was to gain a better understanding of the factors that impact alignment between institutional strategic…

  2. Annual report 2015 of the Institute for Nuclear and Energy Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Schulenberg, Thomas

    2016-07-01

    The annual report of the Institute for Nuclear and Energy Technologies of KIT summarizes its research activities and provides some highlights of each working group, like thermal-hydraulic analyses for nuclear fusion reactors, accident analyses for light water reactors, and research on innovative energy technologies: liquid metal technologies for energy conversion, hydrogen technologies and geothermal power plants. The institute has been engaged in education and training in energy technologies.

  3. Decontamination and decommissioning technology tree and the current status of the technologies

    Energy Technology Data Exchange (ETDEWEB)

    Oh, Won Zin; Won, H.J.; Kim, G.N.; Lee, K.W.; Chol, W.K.; Jung, C.H.; Kim, C.J.; Kim, S.H.; Kwon, S.O.; Chung, C.M

    2001-03-01

    A technology tree diagram was developed on the basis of the necessary technologies applicable to the decontamination and decommissioning of nuclear facilities. The technology tree diagram is consist of 6 main areas such as characterization, decontamination, decommissioning and remote technology, radwaste management, site restoration, and decommissioning plan and engineering. Characterization is divided into 4 regions such as sampling and data collection, general characterization, chemical analysis and radiological analysis. Decontamination is also divided into 4 regions such as chemical decontamination, mechanical decontamination, the other decontamination technologies and new decontamination technologies. Decommissioning and remote technology area is divided into 4 regions such as cutting techniques, decommissioning technologies, new developing technologies and remote technologies. Radwaste management area is divided into 5 regions such as solid waste treatment, sludge treatment, liquid waste treatment, gas waste treatment and thermal treatment. Site restoration area is divided into 3 regions such as the evaluation of site contamination, soil decontamination and ground water decontamination. Finally, permission, decommissioning process, cost evaluation, quality assurance and the estimation of radionuclide inventory were mentioned in the decommissioning plan and engineering area. The estimated items for each technology are applicable domestic D and D facilities, D and D problem area and contamination/requirement, classification of D and D technology, similar technology, principle and overview of technology, status, science technology needs, implementation needs, reference and contact point.

  4. Decontamination and decommissioning technology tree and the current status of the technologies

    International Nuclear Information System (INIS)

    Oh, Won Zin; Won, H. J.; Kim, G. N.; Lee, K. W.; Chol, W. K.; Jung, C. H.; Kim, C. J.; Kim, S. H.; Kwon, S. O.; Chung, C. M.

    2001-03-01

    A technology tree diagram was developed on the basis of the necessary technologies applicable to the decontamination and decommissioning of nuclear facilities. The technology tree diagram is consist of 6 main areas such as characterization, decontamination, decommissioning and remote technology, radwaste management, site restoration, and decommissioning plan and engineering. Characterization is divided into 4 regions such as sampling and data collection, general characterization, chemical analysis and radiological analysis. Decontamination is also divided into 4 regions such as chemical decontamination, mechanical decontamination, the other decontamination technologies and new decontamination technologies. Decommissioning and remote technology area is divided into 4 regions such as cutting techniques, decommissioning technologies, new developing technologies and remote technologies. Radwaste management area is divided into 5 regions such as solid waste treatment, sludge treatment, liquid waste treatment, gas waste treatment and thermal treatment. Site restoration area is divided into 3 regions such as the evaluation of site contamination, soil decontamination and ground water decontamination. Finally, permission, decommissioning process, cost evaluation, quality assurance and the estimation of radionuclide inventory were mentioned in the decommissioning plan and engineering area. The estimated items for each technology are applicable domestic D and D facilities, D and D problem area and contamination/requirement, classification of D and D technology, similar technology, principle and overview of technology, status, science technology needs, implementation needs, reference and contact point

  5. Current Status and Application of Hazard Definition Technology

    Science.gov (United States)

    Greene, George C.

    1997-01-01

    A research is performed: to define wake non-encounter & hazard, to provide requirements for sensors, and to obtain input from the user community. This research includes: validating wake encounter simulation models, establishing a metric to quantify the upset potential of a wake encounter, applying hazard metric and simulation models to the commercial fleet for development of candidate acceptable encounter limits, and applying technology to near term problems to evaluate current status of technology. The following lessons are learned from this project: technology is not adequate to determine absolute spacing requirements; time, not distance, determines the duration of the wake hazard; Optimum standards depend on the traffic; Wing span is an important parameter for characterizing both generator and follower; and Short span "biz jets" are easily rolled.

  6. The status and prospects of radiation application technology in Korea

    International Nuclear Information System (INIS)

    Sung-Kee, Jo

    2010-01-01

    Full text : This article describes the Nuclear age in Korea which began in 1959 when Korea Atomic Energy Research Institute (KAERI) was first established. Since then, Korea became one of the leading countries in the world nuclear technology and industry. In Korea, 20 nuclear power plants are currently in operation, which produced 34.1% of total electricity in 2009. Furthermore, 8 nuclear power plants are under construction. Eventually, Korea succeeded in exporting nuclear power plant to United Arab Emirates and research reactor to Jordan in 2009. The nuclear application can be divided into two fields. The first one is nuclear power production, and the other is radiation application. Due to the governmental promotion policy, the research activity on radiation and RI application is greatly rising in Korea. Korea Atomic Energy Research Institute (KAERI) and Korea Institute of Radiological and Medical Sciences (KIRAMS) are two leading research institutes in this field. KAERI is conducting RI production and neutron research by using research reactor, and radiation application research such as radiation processing, biotechnological and agricultural application, and cyclotron application. KIRAMS is dedicated to the research on the medical application of radiation. Advanced Radiation Technology Institute (ARTI), constructed in 2006 as a sub organization of KAERI, is a major research institute for radiation application to material engineering, agriculture, biotechnology, environmental technology, and cyclotron beam application. ARTI is equipped with various radiation facilities such as Co-60 irradiation facility (490 kCi and 3 kCi), gamma phytotron, gamma cell, electron beam irradiator, ion implanter, and 30 MeV cyclotron. In material engineering field, new industrial and biomedical materials (carbon fiber filament, composite electrolyte, fuel cell membrane, hydrogels) are developed by radiation processing of polymer materials. In agricultural area, new plant varieties

  7. Status of electron beam processing technology in Malaysia

    International Nuclear Information System (INIS)

    Ghazali, Zulkafli; Dahlan, Khairul Zaman; Aiasah, S.H.; Khomsaton, A.B.; Ting, T.M.

    2003-01-01

    The electron beam processing in Malaysia starting in 1991 at MINT (Malaysian Institute for Nuclear Technology Research) has been focussed on medical product sterilization, curing of surface coating and polymer modifications. Subsequent installation of accelerators by private companies promoted the development of radiation processing technologies for the use of production of heat-shrinkable products, pilot-scale flue gas purification, as well as wires, cables, tubes and hydrogels. Decomposition of a wide range of volatile organic compounds from industrial exhausts (car painting lines, volatile dioxin and furan from municipal waste incinerators) and purification of liquid wastewater and drinking water are also being under R and D work. Malaysia will continue to play an active part in the program on radiation technology to strengthen environmentally sustainable development in line with FNCA objectives. (S. Ohno)

  8. Status of the DOE Battery and Electrochemical Technology Program V

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, R.

    1985-06-01

    The program consists of two activities, Technology Base Research (TBR) managed by the Lawrence Berkeley Laboratory (LBL) and Exploratory Technology Development and Testing (EDT) managed by the Sandia National Laboratories (SNL). The status of the Battery Energy Storage Test (BEST) Facility is presented, including the status of the batteries to be tested. ECS program contributions to the advancement of the lead-acid battery and specific examples of technology transfer from this program are given. The advances during the period December 1982 to June 1984 in the characterization and performance of the lead-acid, iron/nickel-oxide, iron/air, aluminum/air, zinc/bromide, zinc/ferricyanide, and sodium/sulfur batteries and in fuel cells for transport are summarized. Novel techniques and the application of established techniques to the study of electrode processes, especially the electrode/electrolyte interface, are described. Research with the potential of leading to improved ceramic electrolytes and positive electrode container and current-collectors for the sodium/sulfur battery is presented. Advances in the electrocatalysis of the oxygen (air) electrode and the relationship of these advances to the iron/air and aluminum/air batteries and to the fuel cell are noted. The quest for new battery couples and battery materials is reviewed. New developments in the modeling of electrochemical cell and electrode performance with the approaches to test these models are reported.

  9. Environmental application research and future plans in plasma arc technology at the georgia institute of technology

    International Nuclear Information System (INIS)

    Nemeth, J.

    1996-01-01

    This paper summarizes the facilities and past, current, and future research efforts at the georgia institute of technology plasma Arc research facility established in 1992. This research facility was established specifically to develop and test applications related to waste management and various remediation concepts. The results of research programs in the vitrification of asbestos materials, municipal incinerator ash, and in situ testing programs, including soil remediation, waste to energy research, landfill remediation and capacity management. The presentation will also include conference and symposium announcements and invitations. 9 tabs

  10. Advanced fuel technology and performance: Current status and trends

    International Nuclear Information System (INIS)

    1990-11-01

    During the last years the Nuclear Fuel Cycle and Waste Management Division of the IAEA has been giving great attention to the collection, analysis and exchange of information in the field of reactor fuel technology. Most of these activities are being conducted in the framework of the International Working Group on Water Reactor Fuel Performance and Technology (IWGFPT). The purpose of this Advisory Group Meeting on Advanced Fuel Technology and Performance was to update and to continue the previous work, and to review the experience of advanced fuel technology, its performance with regard to all types of reactors and to outline the future trends on the basis of national experience and discussions during the meeting. As a result of the meeting a Summary Report was prepared which reflected the status of the advanced nuclear fuel technology up to 1990. The 10 papers presented by participants of this meeting are also published here. A separate abstract was prepared for each of these papers. Refs, figs and tabs

  11. [Nutritional status in patients first hospital admissions service hematology National Cancer Institute].

    Science.gov (United States)

    Baltazar Luna, E; Omaña Guzmán, L I; Ortiz Hernández, L; Ñamendis-Silva, S A; De Nicola Delfin, L

    2013-01-01

    To determine the nutritional status of patients admitted to hospital for the first time the hematology service and who have not received treatment for cancer, to know if the nutritional status assessed by the EGS-GP and serum albumin related mortality of patients A longitudinal, prospective, analytical. EGS-Through GP assessed the nutritional status of patients, we used SPSS 19.0 for data analysis. Evaluaron 119 patients, 52.1% female and 47.9% male. The most common diagnosis was non-Hodgkin lymphoma in 43.7%. According to the EGS-GP 50.4% of patients had some degree of malnutrition or was at risk of suffering of which: 31.1% had moderate and 19.3% had severe malnutrition. The 49.6% of patients had an adequate nutritional status. 30.3% of the patients who died, 37% had severe malnutrition and 50% severe decrease in albumin concentration. The prevalence of malnutrition in hematological patients treated at the National Cancer Institute of Mexico that have not received medical treatment was high. There is an association between nutritional status and mortality in this patient group. Copyright © AULA MEDICA EDICIONES 2013. Published by AULA MEDICA. All rights reserved.

  12. Institutional delivery in rural India: the relative importance of accessibility and economic status.

    Science.gov (United States)

    Kesterton, Amy J; Cleland, John; Sloggett, Andy; Ronsmans, Carine

    2010-06-06

    Skilled attendance at delivery is an important indicator in monitoring progress towards Millennium Development Goal 5 to reduce the maternal mortality ratio by three quarters between 1990 and 2015. In addition to professional attention, it is important that mothers deliver their babies in an appropriate setting, where life saving equipment and hygienic conditions can also help reduce the risk of complications that may cause death or illness to mother and child. Over the past decade interest has grown in examining influences on care-seeking behavior and this study investigates the determinants of place of delivery in rural India, with a particular focus on assessing the relative importance of community access and economic status. A descriptive analysis of trends in place of delivery using data from two national representative sample surveys in 1992 and 1998 is followed by a two-level (child/mother and community) random-effects logistical regression model using the second survey to investigate the determinants. In this investigation of institutional care seeking for child birth in rural India, economic status emerges as a more crucial determinant than access. Economic status is also the strongest influence on the choice between a private-for-profit or public facility amongst institutional births. Greater availability of obstetric services will not alone solve the problem of low institutional delivery rates. This is particularly true for the use of private-for-profit institutions, in which the distance to services does not have a significant adjusted effect. In the light of these findings a focus on increasing demand for existing services seems the most rational action. In particular, financial constraints need to be addressed, and results support current trials of demand side financing in India.

  13. The status of fast reactor technology development in China

    International Nuclear Information System (INIS)

    Xu Mi

    1998-01-01

    The paper describes recent status and trends on Chinese national economy, electrical power capacity and nuclear power development. The preliminary design of the CEFR has been approved by the State Science and Technology Commission. Now it is in the detail design stage. It is planned that the first pot of concrete will be in April of 1999, in the end of 2000 the reactor building construction will be finished and the first criticality of the reactor will be envisaged in July 2003. The brief of preliminary design, analysis results of some beyond design basic accidents and design basic accidents, CEFR research works, and international cooperation are presented in the paper. (author)

  14. Status of advanced ultra-supercritical pulverised coal technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-12-01

    In pulverised coal combustion (PCC) power plant, increasing the maximum temperature of the steam cycle increases the electrical efficiency, which in turn lowers both coal consumption and flue gas emissions. However, the maximum steam temperature is limited by materials that can operate at these conditions for practical service lifetimes without failure. The EU, USA, Japan, India and China all have material research programmes aiming for the next generation of increased steam temperatures and efficiency, known as advanced ultra-supercritical (AUSC) or 700°C technology. This report reviews developments and status of these major material research programmes.

  15. Status of tritium technology development for magnetic-fusion energy

    International Nuclear Information System (INIS)

    Anderson, J.L.

    1983-01-01

    The development of tritium technology for the magnetic fusion energy program has progressed at a rapid rate over the past two years. The focal points for this development in the United States have been the Tritium Systems Test Assembly at Los Alamos and the FED/INTOR studies supported by the Fusion Engineering Design Center at Oak Ridge. In Canada the Canadian Fusion Fuel Technology Project has been initiated and promises to make significant contributions to the tritium technology program in the next few years. The Japanese government has now approved funding for the Tritium Processing Laboratory at the Japan Atomic Energy Research Institute's Tokai Research Establishment. Construction on this new facility is scheduled to begin in April 1983. This facility will be the center for fusion tritium technology development in Japan. The European Community is currently working on the design of the tritium facility for the Joint European Torus. There is considerable interaction between all of these programs, thus accelerating the overall development of this crucial technology

  16. Status of radiation detector and neutron monitor technology

    CERN Document Server

    Kim, Y K; Ha, J H; Han, S H; Hong, S B; Hwang, I K; Lee, W G; Moon, B S; Park, S H; Song, M H

    2002-01-01

    In this report, we describe the current states of the radiation detection technology, detectors for industrial application, and neutron monitors. We also survey the new technologies being applied to this field. The method to detect radiation is the measurement of the observable secondary effect from the interaction between incident radiation and detector material, such as ionization, excitation, fluorescence, and chemical reaction. The radiation detectors can be categorized into gas detectors, scintillation detectors, and semiconductor detectors according to major effects and main applications. This report contains the current status and operational principles of these detectors. The application fields of radiation detectors are industrial measurement system, in-core neutron monitor, medical radiation diagnostic device, nondestructive inspection device, environmental radiation monitoring, cosmic-ray measurement, security system, fundamental science experiment, and radiation measurement standardization. The st...

  17. Status of technologies related to radioactive waste management and disposal

    International Nuclear Information System (INIS)

    1979-09-01

    The document discusses the status of technologies relevant to radioactive waste management and disposal, as defined by the INFCE Working Group 7 study. All fuel cycle wastes, with the exception of mill tailings, are placed in mined geologic repositories. In addition to the availability of technologies, the document discusses the: a) importance of the systems viewpoint, b) importance of modeling, c) need for site-specific investigations, d) consideration of future sub-surface human activities and e) prospects for successful isolation. In the sections on waste isolation and repository safety assessments, principal considerations are discussed. The document concludes that successful isolation of radioactive wastes from the biosphere appears technically feasible for periods of thousands of years provided that the systems view is used in repository siting and design

  18. Moroccan experience in nuclear sciences and technology: Present status

    International Nuclear Information System (INIS)

    El Mediouri, K.

    2001-01-01

    The applications of nuclear technology started in Morocco in the early sixties and were developed particularly in the sectors of Agriculture, Education and Medicine. In the early seventies, these applications were extended to other important sectors such as Industry using gauges and NDT techniques, Mines and Hydrology. But a lack of sufficient and adequate infrastructure has limited the development of these applications. Further more, as Morocco relies totally on foreign imports to meet its energy needs, the option of nuclear power generation started to be considered seriously. This was the initiator of a real national reflection on an integrated program for all peaceful applications of nuclear energy which led to the progressive constitution of an institutional and regulatory frame. In this context, the National Center for Nuclear energy, Sciences and Techniques (CNESTEN), which is a public institution, was created in 1986. Its current programme and future are described in the paper. (author)

  19. On Cultivation of Characteristic Talents in Law in Institutes of Technology

    Science.gov (United States)

    Li, Hong

    2011-01-01

    For the time being, professional education of law offered by institutes of technology has become an important component of cultivation of professional talents in law in China. Only if institutes of technology face up with their disadvantages, make full use of their resource advantages and cultivate characteristic talents in law, are they able to…

  20. 78 FR 12065 - National Institute for Occupational Safety and Health Personal Protective Technology for...

    Science.gov (United States)

    2013-02-21

    ... Institute for Occupational Safety and Health Personal Protective Technology for Pesticide Handlers: Stakeholder Meeting AGENCY: The National Institute for Occupational Safety and Health (NIOSH) of the Centers...: Notice of public meeting. SUMMARY: The National Institute for Occupational Safety and Health (NIOSH) of...

  1. Status Report of National Radiation Fusion Technology R and D

    International Nuclear Information System (INIS)

    Lee, Young Cheol; Woo, Byun Myung; Koo, Hwang Duk

    2007-07-01

    Although RT Industry now occupy the high portion of world market size, about $500 billions, it would be expanded steeply to U$1,100 billions in 2010, and U$4 trillions in 2030 when using PV (present value) methodology. But domestic RT industry is the level of 'the dawn stage'. Recently, individual government department begins to perceive the importance of RT industry. In order to promote Domestic RT technology and industry as a growth dynamic of next generation of 21 century, - Intensive R and D investment policy driven by the Ministry of Science and Technology - In the side of efficient allocation of resources, centralizing in national professional research institute and bringing to effect is desirable

  2. Status of fast reactor design technology development in Korea

    International Nuclear Information System (INIS)

    Dohee Hahn

    2000-01-01

    The LMR Design Technology Development Project was approved as a national long-term R and D program in 1992 by the Korea Atomic Energy Commission (KAEC) which decided to develop and construct a LMR with the goal of developing a LMR which can serve as a long term power supplier with competitive economics and enhanced safety. Based upon the KAEC decision, the Korea Atomic Energy Research Institute (KAERI) has been developing KALIMER (Korea Advanced Liquid Metal Reactor). According to the revised National Nuclear Energy Promotion Plan of June 1997, the basic design of KALIMER will be completed by 2006 and the possibility of construction will be considered sometime during the mid 2010s. Three year Phase 1 of the LMR Design Technology Development Project was completed in March 2000 and a preliminary conceptual design report has been issued. Conceptual design of KALIMER will be developed during the Phase 2 of the Project, which will last for two years. (author)

  3. Privacy and Technology: Counseling Institutions of Higher Education.

    Science.gov (United States)

    Cranman, Kevin A.

    1998-01-01

    Examines the challenges to colleges and universities associated with maintaining privacy as use of technology increases and technology advances. Lapses in security, types of information needing protection, liability under federal laws, other relevant laws and pending legislation, ethics, and policy implementation in the electronic age are…

  4. Status and development of food irradiation technology in Korea

    International Nuclear Information System (INIS)

    Byun, Myungwoo; Park, Younnam

    1996-01-01

    In Korea, the health authorities and food industry emphasize the need of sanitary food production, which is mainly resulted from the recent growing of consumer's interest in the safety of food. For that reason, development of a new alternative technology of chemicals currently used for decontamination and disinfestation has become an urgent task in the domestic and worldwide food industry. Furthermore, the improvement of quality and manufacturing process of processed foods is a requisite for winning the competition in export fields. Irradiation technology being practically applicable in the food industry has been well established on the basis of more than 40 years of R and D work in the fields of the increasing availability of food-stuffs, sanitary food production and quarantine treatment in a food trade. The wholesomeness of irradiated foods has been officially approved in 37 countries, of which 25 countries are commercially utilizing food irradiation technology. The first commercial irradiator in Korea (18.5 PBq : 500 kCi 60 Co, max. cap ; 4 MCi) was established at Kyungki-do, Yeoju-gun by Greenpia Tech. Inc. with the technical assistance of Korea Atomic Energy Research Institute in June 1987. As of 1996, thirteen irradiated food groups (above 25 items) have been domestically approved for human consumption and an industrial irradiation facility is also available. However, the promotion of consumer acceptance toward irradiated foods is considered as a confronted subject to be studied for a commercial utilization of this technology

  5. Аsymmetry of Structural Institutional and Technological Changes in Economy

    Directory of Open Access Journals (Sweden)

    Katkovа Marina Andreevna

    2014-12-01

    Full Text Available The article is devoted to the research on interrelation between institutional and technological changes. The authors provide the convincing argument in favor of the thesis on asymmetry of structural, institutional and technological changes. The complex of analytic methods is used in the work – comparative statics, static analysis, dynamic analysis. The analysis results in the conclusion on strengthening the heterogeneity, instability and uncertainty of the social and economic phenomena and processes. The authors comprehend structural changes as the changes in ratios and proportions of economic structure. They point to the emergence of new integrated characteristics and describe the synergetic effect of the general development. The use of the theory of technological modes allowed allocating radical and local shifts. The particular emphasis is placed on the analysis of reversible and irreversible structural and technological shifts as a special form of structural and technological changes. The application of the method of institutional statics and dynamics is effective in the analysis of technological and institutional symmetry / asymmetry. The emergence of negative institutional changes is explained by insufficient, inadequate or fragmentary assimilation of market institutes. The institutes interfering the innovative development stand against the institutes of innovative development. The institutional traps of structural and technological transformations are subdivided by authors into the traps of micro- and macrolevel. The authors point to the difficulty of assessing the institutes of microlevel by means of statistical data. They suggest using the phenomena which are under the control of authorities and subject to regulation as indicators. To define the opportunities of institutional management and the borders of government intervention the authors investigate in detail the institutional traps. They include moral and psychological unreadiness

  6. Status of reprocessing technology in the HTGR fuel cycle

    International Nuclear Information System (INIS)

    Kaiser, G.; Merz, E.; Zimmer, E.

    1977-01-01

    For more than ten years extensive R and D work has been carried out in the Federal Republic of Germany in order to develop the technology necessary for closing the fuel cycle of high-temperature gas-cooled reactors. The efforts are concentrated primarily on fuel elements having either highly enriched 235 U or recycled 233 U as the fissile and thorium as the fertile material embedded in a graphite matrix. They include the development of processes and equipment for reprocessing and remote preparation of coated microspheres from the recovered uranium. The paper reviews the issues and problems associated with the requirements to deal with high burn-up fuel from HTGR's of different design and composition. It is anticipated that a grind-burn-leach head-end treatment and a modified THOREX-type chemical processing are the optimum choice for the flowsheet. An overview of the present status achieved in construction of a small reprocessing facility, called JUPITER, is presented. It includes a discussion of problems which have already been solved and which have still to be solved like the treatment of feed/breed particle systems and for minimizing environmental impacts envisaged with a HTGR fuel cycle technology. Also discussed is the present status of remote fuel kernel fabrication and coating technology. Additional activities include the design of a mock-up prototype burning head-end facility, called VENUS, with a throughput equivalent to about 6000 MW installed electrical power, as well as a preliminary study for the utilisation of the Karlsruhe LWR prototype reprocessing plant (WAK) to handle HTGR fuel after remodelling of the installations. The paper concludes with an outlook of projects for the future

  7. Status on RF superconductivity at the institute for high energy physics

    International Nuclear Information System (INIS)

    Sevryukova, L.M.

    2003-01-01

    The development of SC cavities started at the Institute for High Energy Physics in September 1980 when the group of technology and study of SC cavities of the Research Institute of Nuclear Physics at Tomsk Polytechnic Institute moved there. At first the group worked at the Linear Accelerator Division, then later, in March 1993 the Federate Problem Laboratory for Technology and Study of the superconducting cavities of the Russian Atomic Ministry was founded at IHEP. The main goal of the SC cavity investigation is to study and develop the suppression methods for emission effects and conditions for thermomagnetic breakdown creation to increase the accelerating fields at SC cavities; also developing the experimental equipment to answer this goal. In this report the following items are enlightened in short: 1. Study and development of methods to suppress emission effects in SC cavities; 2. Study and development of methods to increase the threshold of the thermomagnetic breakdown. 3. Study of new materials and technologies. 4. SVAAP (SC accelerator for the applied purposes) project development. (author)

  8. Makanzwa Mercy Masunda, Harare Institute of Technology Charles ...

    African Journals Online (AJOL)

    pc

    Entrepreneurship has been confined to management and ... surprising that entrepreneurship courses are among the fastest growing ... introduction of STEM programmes at tertiary institutions. ... control; tolerance of ambiguity, stress and uncertainty; calculated risk taking and ... resources are very important in latter stages.

  9. Freshwater Institute: Focused on improving recirculating aquaculture system technology

    Science.gov (United States)

    Recirculating aquaculture system (RAS) technologies help to overcome barriers to domestic aquaculture expansion and enhance the sustainability of the modern fish farming industry through reduction in environmental impacts. With RAS, fish farm expansion is no longer highly constrained by competition ...

  10. TTI Phase 2 Institutional Support: Science, Technology and ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    This funding will help strengthen the Science, Technology and Innovation ... It also aims to raise awareness among government officials and parliamentarians of the critical role of this research for evidence-based STI policies ... Related content ...

  11. The Asia Pacific LNG trade: Status and technology development

    International Nuclear Information System (INIS)

    Hovdestad, W.R.

    1995-01-01

    The Asia Pacific Region is experiencing a period of sustained economic expansion. Economic growth has led to an increasing demand for energy that has spurred a rapid expansion of baseload liquefied natural gas (LNG) facilities in this region. This is illustrated by the fact that seven of the ten baseload facilities in existence provide LNG for markets in the Asia Pacific region. With the three exceptions having been initially commissioned in 1972 and earlier, it is fair to observed that most advances in LNG technology have been developed and applied for this market. The paper presents the current status and identified future trends for the Asia Pacific LNG trade. Technology development in terms of application to onstream production, processing and transportation facilities, including LNG tankers, is presented. The potential of future advances to applied technology and operational practices to improve the cost-effectiveness of new and existing facilities is discussed. Current design data and methods as actually used are examined in terms of identifying where fundamental research and basic physical data are insufficient for optimization purposes. These findings are then summarized and presented in terms of the likely evolution of future and existing LNG projects in the Asia Pacific region

  12. Status of the DOE battery and electrochemical technology program. III

    International Nuclear Information System (INIS)

    Roberts, R.

    1982-02-01

    This report reviews the status of the Department of Energy Subelement on Electrochemical Storage Systems. It emphasizes material presented at the Fourth US Department of Energy Battery and Electrochemical Contractors' Conference, held June 2-4, 1981. The conference stressed secondary batteries, however, the aluminum/air mechanically rechargeable battery and selected topics on industrial electrochemical processes were included. The potential contributions of the battery and electrochemical technology efforts to supported technologies: electric vehicles, solar electric systems, and energy conservation in industrial electrochemical processes, are reviewed. The analyses of the potential impact of these systems on energy technologies as the basis for selecting specific battery systems for investigation are noted. The battery systems in the research, development, and demonstration phase discussed include: aqueous mobile batteries (near term) - lead-acid, iron/nickel-oxide, zinc/nickel-oxide; advanced batteries - aluminum/air, iron/air, zinc/bromine, zinc/ferricyanide, chromous/ferric, lithium/metal sulfide, sodium/sulfur; and exploratory batteries - lithium organic electrolyte, lithium/polymer electrolyte, sodium/sulfur (IV) chloroaluminate, calcium/iron disulfide, lithium/solid electrolyte. Supporting research on electrode reactions, cell performance modeling, new battery materials, ionic conducting solid electrolytes, and electrocatalysis is reviewed. Potential energy saving processes for the electrowinning of aluminum and zinc, and for the electrosynthesis of inorganic and organic compounds are included

  13. Robotic technology in surgery: current status in 2008.

    Science.gov (United States)

    Murphy, Declan G; Hall, Rohan; Tong, Raymond; Goel, Rajiv; Costello, Anthony J

    2008-12-01

    There is increasing patient and surgeon interest in robotic-assisted surgery, particularly with the proliferation of da Vinci surgical systems (Intuitive Surgical, Sunnyvale, CA, USA) throughout the world. There is much debate over the usefulness and cost-effectiveness of these systems. The currently available robotic surgical technology is described. Published data relating to the da Vinci system are reviewed and the current status of surgical robotics within Australia and New Zealand is assessed. The first da Vinci system in Australia and New Zealand was installed in 2003. Four systems had been installed by 2006 and seven systems are currently in use. Most of these are based in private hospitals. Technical advantages of this system include 3-D vision, enhanced dexterity and improved ergonomics when compared with standard laparoscopic surgery. Most procedures currently carried out are urological, with cardiac, gynaecological and general surgeons also using this system. The number of patients undergoing robotic-assisted surgery in Australia and New Zealand has increased fivefold in the past 4 years. The most common procedure carried out is robotic-assisted laparoscopic radical prostatectomy. Published data suggest that robotic-assisted surgery is feasible and safe although the installation and recurring costs remain high. There is increasing acceptance of robotic-assisted surgery, especially for urological procedures. The da Vinci surgical system is becoming more widely available in Australia and New Zealand. Other surgical specialties will probably use this technology. Significant costs are associated with robotic technology and it is not yet widely available to public patients.

  14. The Historically Black Colleges and Universities/Minority Institutions Environmental Technology Consortium annual report 1994--1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-07-01

    The HBCU/MI ET Consortium was established in January 1990, through a Memorandum of Understanding (MOU) among its member institutions. This group of research oriented Historically Black Colleges and Universities and Minority Institutions (HBCU/MIs) agreed to work together to initiate or revise education programs, develop research partnerships with public and private sector organizations, and promote technology development to address the nation`s critical environmental contamination problems. The Consortium`s Research, Education and Technology Transfer (RETT) Plan became the working agenda. The Consortium is a resource for collaboration among the member institutions and with federal an state agencies, national and federal laboratories, industries, (including small businesses), majority universities, and two and four-year technical colleges. As a group of 17 institutions geographically located in the southern US, the Consortium is well positioned to reach a diverse group of women and minority populations of African Americans, Hispanics and American Indians. This Report provides a status update on activities and achievements in environmental curriculum development, outreach at the K--12 level, undergraduate and graduate education, research and development, and technology transfer.

  15. Present status of laser technology for maintenance and repair

    International Nuclear Information System (INIS)

    Sano, Yuji

    2001-01-01

    A laser has superior spatial and timely controllability and has no repulsive force at its use, it is a tool suitable for remote operation. And, as a partial processing with low exotherm and deformation by its use becomes possible, it can have an advantage omissible for post processes such as heat treatment and so on. Therefore, on in-situ repair of present constructions, laser is thought to be an optimum tool. And, in nuclear energy plants, maintenance and management of their instruments are important, and then a number of technical developments activating its advantages have been carried out. Above all, repair engineering around a reactor has a number of places difficult to access them for its operators, so remote engineering using laser is desired for in special. Here was described on the present status of development and realization containing protect conservation and inspection repair technology using laser. (G.K.)

  16. Dish concentrators for solar thermal energy - Status and technology development

    Science.gov (United States)

    Jaffe, L. D.

    1981-01-01

    Comparisons are presented of point-focusing, or 'dish' solar concentrator system features, development status, and performance levels demonstrated to date. In addition to the requirements of good optical efficiency and high geometric concentration ratios, the most important future consideration in solar thermal energy dish concentrator design will be the reduction of installed and lifetime costs, as well as the materials and labor costs of production. It is determined that technology development initiatives are needed in such areas as optical materials, design wind speeds and wind loads, structural configuration and materials resistance to prolonged exposure, and the maintenance of optical surfaces. The testing of complete concentrator systems, with energy-converting receivers and controls, is also necessary. Both reflector and Fresnel lens concentrator systems are considered.

  17. Education and occupational status in 14 countries: the role of educational institutions and labour market coordination.

    Science.gov (United States)

    Andersen, Robert; van de Werfhorst, Herman G

    2010-06-01

    This article explores the role of national institutional factors--more specifically, the level of skill transparency of the education system and labour market coordination--in accounting for cross-national differences in the relationship between education and occupational status. Consistent with previous research, our findings suggest that skill transparency is the primary moderator. Countries with a highly transparent educational system (i.e., extensive tracking, strong vocational orientation, limited tertiary enrolment) tend to be characterized by a strong relationship between education and occupational status. These findings hold even after controlling for the level of labour market coordination. Nevertheless, we also find that labour market coordination plays an independent role by dampening the effect of education on occupational status. Taken together, these results suggest two quite different policy implications: (1) strengthening the skill transparency of the education system by increasing secondary and tertiary-level differentiation may strengthen the relationship between education and occupation, regardless of the level of coordination, and (2) increasing labour market coordination could lead to improved social inclusion and a reduction in inequalities related to educational attainment.

  18. Massachusetts Institute of Technology, Plasma Fusion Center, Technical Research Programs

    International Nuclear Information System (INIS)

    1980-08-01

    A review is given of the technical programs carried out by the Plasma Fusion Center. The major divisions of work areas are applied plasma research, confinement experiments, fusion technology and engineering, and fusion systems. Some objectives and results of each program are described

  19. Massachusetts Institute of Technology, Plasma Fusion Center, Technical Research Programs

    Energy Technology Data Exchange (ETDEWEB)

    Davidson, Ronald C.

    1980-08-01

    A review is given of the technical programs carried out by the Plasma Fusion Center. The major divisions of work areas are applied plasma research, confinement experiments, fusion technology and engineering, and fusion systems. Some objectives and results of each program are described. (MOW)

  20. Outsourcing Technology in Government: Owned, Controlled, or Regulated Institutions.

    Science.gov (United States)

    Gordon, Mark L.; Walsh, Timothy P.

    1997-01-01

    Examines the growing trend toward and objectives of government outsourcing of information technology (IT) both in the United States and around the world. Describes representative outsourcing arrangements; highlights steps governments should take to ensure that objectives are met; and discusses factors influencing management of public sector…

  1. Farmers, institutions and technology in agricultural change processes

    NARCIS (Netherlands)

    Flor, Rica Joy; Singleton, Grant; Casimero, Madonna; Abidin, Zainal; Razak, Nasruddin; Maat, Harro; Leeuwis, Cees

    2016-01-01

    International agricultural research centres use approaches which aim to create effective linkages between the practices of farmers, introduced technologies and the wider environment that affects farming. This paper argues that such new approaches require a different type of monitoring as a

  2. Institutional and societal innovations in information technology for developing countries

    NARCIS (Netherlands)

    James, M.J.

    2012-01-01

    Innovation in the developed countries is heavily based on R&D and is closely related to income, skills and infrastructure in those countries. Little is geared towards IT problems of poor countries. This technology does not suit the incomes, skills and so on of poor countries. Fortunately another

  3. The recent status of nuclear technology development in Thailand

    International Nuclear Information System (INIS)

    Laoharojanaphand, Sirinart; Cherdchu, Chainarong; Sumitra, Tatchai; Sudprasert, Wanwisa; Chankow, Nares; Tiyapan, Kanokrat; Onjun, Thawatchai; Bhanthumnavin, Duangduen

    2016-01-01

    Thailand has started the peaceful utilization of nuclear program in 1961. The program has developed considerably in various aspects. Laws and regulations were established while applications in medical, agriculture, industry as well as research and education have been accomplished successfully in the country. As for the energy production, Thailand has realized the importance of nuclear power generation several years back. However, the implementation has been delayed. There are four main nuclear organizations namely The Thai Atomic Energy Commission - the country's policy holder, the Office of Atoms for Peace (OAP) - the nuclear regulatory bodies, Thailand Institute of Nuclear Technology (TINT: Public Organization) - the research and services provider in nuclear field and the Nuclear Society of Thailand the non-governmental organization. Major research in nuclear technology is actively carried out at TINT. Filed of research include medical and public health, agricultural, material and industrial, environmental and advanced technology like neutron scattering and nuclear fusion. Nuclear density gauge has been utilized in many industries including petrochemical production and refineries. TINT is also providing services on nuclear radiography to industrial and clients. Additionally, x-ray techniques have been utilized in many manufacturers for quality and process control. Nuclear applications for medical purpose have been utilized in Thailand several years back both for diagnostic and therapeutic purposes. To ensure safe and peaceful use of nuclear technology and for the safety of the general public in Thailand, OAP has launched laws, regulations and ministerial announcements. Thailand has only one multi-purposes nuclear research reactor and no NPP. Yet we have realized the importance of nuclear power generation several years back. (N.T.)

  4. Utility of functional status for classifying community versus institutional discharges after inpatient rehabilitation for stroke.

    Science.gov (United States)

    Reistetter, Timothy A; Graham, James E; Deutsch, Anne; Granger, Carl V; Markello, Samuel; Ottenbacher, Kenneth J

    2010-03-01

    To evaluate the ability of patient functional status to differentiate between community and institutional discharges after rehabilitation for stroke. Retrospective cross-sectional design. Inpatient rehabilitation facilities contributing to the Uniform Data System for Medical Rehabilitation. Patients (N=157,066) receiving inpatient rehabilitation for stroke from 2006 and 2007. Not applicable. Discharge FIM rating and discharge setting (community vs institutional). Approximately 71% of the sample was discharged to the community. Receiver operating characteristic curve analyses revealed that FIM total performed as well as or better than FIM motor and FIM cognition subscales in differentiating discharge settings. Area under the curve for FIM total was .85, indicating very good ability to identify persons discharged to the community. A FIM total rating of 78 was identified as the optimal cut point for distinguishing between positive (community) and negative (institution) tests. This cut point yielded balanced sensitivity and specificity (both=.77). Discharge planning is complex, involving many factors. Identifying a functional threshold for classifying discharge settings can provide important information to assist in this process. Additional research is needed to determine if the risks and benefits of classification errors justify shifting the cut point to weight either sensitivity or specificity of FIM ratings. Copyright 2010 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

  5. Institutional Status of BRICS and Pragmatic Cooperation:The Case of South America

    Directory of Open Access Journals (Sweden)

    Ernani Contipelli

    2015-05-01

    Full Text Available As a group formed by emerging powers, the BRICS is characterized by its particular profile: a pragmatic politic strategythat presents contradictory actions between its members. Internal cooperation among the BRICS members is becomingmore “institutional” with the creation of its financial institutions, the New Development Bank (NDB and the ContingencyReserve Agreement (CRA. These have led the group to a next stage in its history without changing its essence. The NDBhas been created to mobilize resources for infrastructure and sustainable development projects in emerging and developingcountries, and the CRA has been established to provide liquidity to countries experiencing difficulties in their balance ofpayment and to head off future economic crises. Many developing countries are closely observing these financial institutions.South America appears particularly interested to take advantage of them by attracting investments and obtainingloans from BRICS members in order to develop infrastructure in their countries and to build more informal relationshipswith foreign partners with reduced political commitments. For South America, the BRICS is an example of a pragmaticformula for cooperation in contrast to the modus operandi of traditional powers. In other words, poor countries would havean alternative to the International Monetary Fund and World Bank. Relations between the BRICS and South America arecharacterized by a pragmatic approach that reflects the “way of being” of the group and the necessities of modernization ofthe region. This article analyzes the particular relationship that BRICS is establishing with the countries of South Americausing its institutional status and pragmatic approach.

  6. Teacher evaluation system, institutions of technology higher education: quality guidelines

    Directory of Open Access Journals (Sweden)

    Laura Belkis Parada Romero

    2016-01-01

    Full Text Available Due to the globalization of education, it has become prevalent to strengthen the quality systems to ensure that educational actors in higher education institutions are the best. In this context teachers are given a main role since they are cornerstones in educational processes. Currently, teacher quality is assessed through an assessment or evaluation system. Almost every university evaluates its teachers, but there is no legal regulation on how to do it, in most institutions there is a professional in charge of designing and applying assessment instruments according to the authors he/she prefers. In most universities, on the one hand, it is used a traditional questionnaire aiming to collect data about dimensions associated with teaching, on the other hand, there is another option in which assessment models include self-evaluation, as in some cases in Chile. That’s why one of the concerns of this research is to propose guidelines for a more qualitative and formative assessment not exclusively following political parameters –based on administrative decisions–, but following emerging proposals with a deeper analysis. Nowadays the main actors in teacher evaluation are teachers, students and administrative staff, every six months these actors are evaluated by using an assessment tool that they usually do not know. The research investigates the perception actors in teacher evaluation have regarding its objectives, methods and stages, so they put forward ideas on how to restructure the current institutional assessment and propose improvements aiming at both the quantitative aspect and the qualitative analysis of performances and skills.

  7. Advanced secondary batteries: Their applications, technological status, market and opportunity

    Science.gov (United States)

    Yao, M.

    1989-03-01

    Program planning for advanced battery energy storage technology is supported within the NEMO Program. Specifically this study had focused on the review of advanced battery applications; the development and demonstration status of leading battery technologies; and potential marketing opportunity. Advanced secondary (or rechargeable) batteries have been under development for the past two decades in the U.S., Japan, and parts of Europe for potential applications in electric utilities and for electric vehicles. In the electric utility applications, the primary aim of a battery energy storage plant is to facilitate peak power load leveling and/or dynamic operations to minimize the overall power generation cost. In the application for peak power load leveling, the battery stores the off-peak base load energy and is discharged during the period of peak power demand. This allows a more efficient use of the base load generation capacity and reduces the need for conventional oil-fired or gas-fire peak power generation equipment. Batteries can facilitate dynamic operations because of their basic characteristics as an electrochemical device capable of instantaneous response to the changing load. Dynamic operating benefits results in cost savings of the overall power plant operation. Battery-powered electric vehicles facilitate conservation of petroleum fuel in the transportation sector, but more importantly, they reduce air pollution in the congested inner cities.

  8. Status of Activities on Rehabilitation Of Radioactively Contaminated Facilities and the Site of Russian Research Center ''Kurchatov Institute''

    International Nuclear Information System (INIS)

    Volkov, V. G.; Ponomarev-Stepnoi, N. N.; Melkov, E. S; Ryazantsev, E. P.; Dikarev, V. S.; Gorodetsky, G. G.; Zverkov, Yu. A.; Kuznetsov, V. V.; Kuznetsova, T. I.

    2003-01-01

    This paper describes the program, the status, and the course of activities on rehabilitation of radioactively contaminated facilities and the territory of temporary radioactive waste (radwaste) disposal at the Russian Research Center ''Kurchatov Institute'' (RRC KI) in Moscow as performed in 2001-2002. The accumulation of significant amounts of radwaste at RRC KI territory is shown to be the inevitable result of Institute's activity performed in the days of former USSR nuclear weapons project and multiple initial nuclear power projects (performed from 1950's to early 1970's). A characterization of RRC KI temporary radwaste disposal site is given. Described is the system of radiation control and monitoring as implemented on this site. A potential hazard of adverse impacts on the environment and population of the nearby housing area is noted, which is due to possible spread of the radioactive plume by subsoil waters. A description of the concept and project of the RRC KI temporary radwaste disposal site is presented. Specific nature of the activities planned and performed stems from the nearness of housing area. This paper describes main stages of the planned activities for rehabilitation, their expected terms and sources of funding, as well as current status of the project advancement. Outlined are the problems faced in the performance and planning of works. The latter include: diagnostics of the concrete-grouted repositories, dust-suppression technologies, packaging of the fragmented ILW and HLW, soil clean-up, radioactive plume spread prevention, broad radiation monitoring of the work zone and environment in the performance of rehabilitation works. Noted is the intention of RRC KI to establish cooperation with foreign, first of all, the U.S. partners for the solution of problems mentioned above

  9. An agent-based model of centralized institutions, social network technology, and revolution.

    Science.gov (United States)

    Makowsky, Michael D; Rubin, Jared

    2013-01-01

    This paper sheds light on the general mechanisms underlying large-scale social and institutional change. We employ an agent-based model to test the impact of authority centralization and social network technology on preference falsification and institutional change. We find that preference falsification is increasing with centralization and decreasing with social network range. This leads to greater cascades of preference revelation and thus more institutional change in highly centralized societies and this effect is exacerbated at greater social network ranges. An empirical analysis confirms the connections that we find between institutional centralization, social radius, preference falsification, and institutional change.

  10. Touch Screen Technology Adoption and Utilisation by Educators in Early Childhood Educational Institutions

    DEFF Research Database (Denmark)

    Plumb, Melinda; Kautz, Karlheinz; Tootell, Holly

    2013-01-01

    The adoption of information and communication technology (ICT) in early childhood educational settings, in particular touch screen technology such as interactive whiteboards and tablet computing devices has potential for use within early childhood educational institutions. We conducted a literature...... that can support the successful implementation of touch screen technology within early childhood educational institutions....... in regards to touch screen technology in early childhood, particularly from a process perspective, and suggest that further research is required to understand the interplay between individual actions and organisational structural influences. This will contribute to the development of an understanding...

  11. Nuclear-waste problems are deemed less technological than institutional

    International Nuclear Information System (INIS)

    Anon.

    1976-01-01

    Nuclear waste management needs administrative re-organization to separate management, regulation, and research and development responsibilities. New stable, but adaptable, institutions need to be established to clarify criteria for containing and isolating nuclear waste and to ensure that criteria are met. Present structure, which puts much of the temporary responsibility on the private sector and permanent responsibility on ERDA, does not encourage efficiency. Government regulations and public pressure have provided some incentives, but military nuclear wastes have no independent regulation to protect the public, and the states have proved ineffective in regulating commercial operations. Recommendations for reorganization are: (1) to establish a national public corporation to manage high-level and transuranic wastes; (2) to consolidate regulatory authority under a comprehensive Nuclear Regulatory Commission; and (3) to establish a commission within the International Atomic Energy Agency for licensing and review of disposal operations

  12. Institutional adaptation in the UK nuclear technology industry

    International Nuclear Information System (INIS)

    Kemp, R.

    1986-01-01

    Public inquiries into controversial development proposals have themselves become increasing controversial in recent years. Despite their increasing length and cost, such proceedings remain part of the administrative process - the Inspector's report serving to 'inform the minister's mind'. This paper examines certain features of the Sizewell B Inquiry and draws attention to the ability of the applicants to respond to criticisms raised at the hearings through various forms of institutional adaptation. Changes to the Central Electricity Generating Board's case on the organization of project management, to the management of the nuclear site licensing process, and to provisions for future nuclear reactor choice are highlighted. Significantly, each of these areas had been the subject of particular investigations undertaken at the behest of the inquiry Inspector. The paper concludes by raising a number of questions concerning the implications of this singularly interactive process. (author)

  13. Activities of the data centers on atomic spectroscopy at the National Institute of Standards and Technology

    International Nuclear Information System (INIS)

    Wiese, W.L.

    1990-01-01

    The activities concerning Atomic Energy Levels and Wavelengths, Atomic Transition Probabilities and Spectral Line Shapes and Shifts at the National Institute of Standards and Technology (Gaithersburg, USA) are listed together with the corresponding lists of publications

  14. Information technologies in carrying out monitoring comparisons of pedagogical higher education institutions

    Directory of Open Access Journals (Sweden)

    Вадим Валерьевич Гриншкун

    2014-12-01

    Full Text Available In article various approaches to use of information technologies when carrying out monitoring researches of higher educational institutions are described. Results of researches are considered on the example of indicators of pedagogical university.

  15. National Institute of Standards and Technology (NIST) cybersecurity risk management framework applied to modern vehicles

    Science.gov (United States)

    2014-10-01

    The primary objective of the work described in this report is to review the National Institute of Science and Technology (NIST) guidelines and foundational publications from an automotive : cybersecurity risk management stand-point. The NIST approach...

  16. Fifty years experiences in nuclear engineering education at Tokyo Institute of Technology

    International Nuclear Information System (INIS)

    Fujii, Yasuhiko; Saito, Masaki; Aritomi, Masanori

    2008-01-01

    Nuclear engineering education has been initiated in 1957 at the graduate school of Tokyo Institute of Technology. Educational activities have been conducted for fifty years under the support of the Research Laboratory for Nuclear Reactors. In the past fifty years, about 1000 Master students and 200 Doctoral students and 200 Doctoral students graduated from our Nuclear Engineering Department at Tokyo Institute of Technology. Many of them found their jobs in nuclear industries and institutes. International course of nuclear engineering was initiated in 1994, and so far about 90 students from 15 overseas countries have graduated from our Master and Doctoral Programs. In 2003, our proposal of 'Innovative Nuclear Energy System for the Sustainable World' was adopted as the Center of Excellent Program sponsored by Ministry of Education, Science and Technology. Recently a collaborative education network has been developed among Kanazawa University, Fukui University, Ibaraki University, Okayama University, Tokyo Institute of Technology and Japan Atomic Energy Agency. (author)

  17. On the Cutting Edge: Movements and Institutional Examples of Technological Disruption

    Science.gov (United States)

    Leon, Marjorie Roth; Price, Todd Alan

    2016-01-01

    This chapter describes technological disruptions in higher education that pose challenges and offer opportunities to college and university students, faculty, and administrators. It provides examples of innovative responses being explored by 2-year and 4-year higher education institutions.

  18. Review of ANSI [American National Standards Institute] N13.11: A status report

    International Nuclear Information System (INIS)

    Sims, C.S.

    1988-01-01

    In 1983, the American National Standards Institute (ANSI) issued the dosimetry standard titled ''Personnel Dosimetry Performance -- Criteria for Testing'' as ANSI N13.11. This standard forms the basis for the National Voluntary Laboratory Accreditation Program (NVLAP) which has become familiar to dosimeter processors in recent years. This standard is particularly important because the Nuclear Regulatory Commission (NRC) requires that all licensees have personnel dosimetry devices processed by processors that are NVLAP accredited. This standard is currently undergoing review and modifications are going to be made. This paper contains a brief history of the events leading to the development of ANSI N13.11 - 1983, information concerning the present standard and associated performance test results, and the selection of the review group. Following that, the status of the review is presented and statements regarding the future outlook for the standard are made. 10 refs., 5 tabs

  19. Status of Simulations for the Cyclotron Laboratory at the Institute for Nuclear Research and Nuclear Energy

    Science.gov (United States)

    Asova, G.; Goutev, N.; Tonev, D.; Artinyan, A.

    2018-05-01

    The Institute for Nuclear Research and Nuclear Energy is preparing to operate a high-power cyclotron for production of radioisotopes for nuclear medicine, research in radiochemistry, radiobiology, nuclear physics, solid state physics. The cyclotron is a TR24 produced by ASCI, Canada, capable to deliver proton beams in the energy range of 15 to 24 MeV with current as high as 400 µA. Multiple extraction lines can be fed. The primary goal of the project is the production of PET and SPECT isotopes as 18F, 67,68Ga, 99mTc, etc. This contribution reports the status of the project. Design considerations for the cyclotron vault will be discussed for some of the target radioisotopes.

  20. Teaching Beliefs and Practice, Institutional Context, and the Uptake of Web-Based Technology

    Science.gov (United States)

    Lawrence, Belinda; Lentle-Keenan, Samantha

    2013-01-01

    This research examines the relationship between teaching beliefs and practice, institutional constraints, and the uptake of Web-based technology for teaching in higher education. Semistructured interviews were conducted with six teachers at a New Zealand tertiary institution. Using inductive analysis and cultural historical activity theory, themes…

  1. LNG - Status in Denmark. Technology and potential. Project report

    Energy Technology Data Exchange (ETDEWEB)

    Naeslund, M.

    2012-05-15

    The interest for LNG both on a small and a large scale is increasing worldwide. The experiences and knowledge on LNG is limited in Denmark. The Danish gas companies' Technical Management Group (TCG) has asked for a status report including a technology description and an evaluation of the potential in Denmark. A survey of primarily small-scale LNG technology is done in the report. The focus is motivated by the new areas of gas utilisation that become possible with small-scale LNG. Small-scale LNG in this study is defined as LNG stored and used at the application or in an isolated gas grid. The small-scale use of LNG has today an almost negligible share of the total LNG trade but offers interesting new applications for gas utilisation. LNG on a small scale can be used primarily as: 1) Ship fuel. 2) Truck fuel (heavy duty long distance). 3) Individual users not connected to the natural gas grid. 4) Backup for upgraded biogas to individual users and vehicle fleets. 5) Security of supply or supply enhancement of heavily loaded parts of the gas grid. 6) Small-scale storage and/or peak shaving. All but the first topics are natural uses for the current Danish gas distributors. LNG as ship fuel may engage other specialized LNG companies. The report contains a technical description of the parts in primarily small-scale LNG handling and operation. Liquefaction, transport, storage, engine technologies, gas quality and safety aspects related to LNG are covered. There seem to be two more or less separate paths for LNG in Denmark, onshore and off-shore use. These are not, apparently, sharing their experiences and knowledge. Rules and regulations are also different which may create some problems in the interface, for example ship bunkering. Further studies are suggested in the area of gas quality and engine technologies and adaptation of foreign guidelines for small-scale installations to Danish conditions. These guidelines ought to be based on international standards and

  2. [Current status and potential perspectives in classical radiotherapy technology].

    Science.gov (United States)

    Dabić-Stanković, Kata M; Stanković, Jovan B; Radosević-Jelić, Ljiljana M

    2004-01-01

    After purchase of radiotherapy equipment in 2003, classic radiation therapy in Serbia will reach the highest world level. In order to define the highest standards in radiation technology, we analyzed the current status and potential perspectives of radiation therapy. An analysis of present situation in the USA, assumed as the most developed in the world, was done. Available data, collected in the last 3 years (equipment assortment, therapy modalities, workload and manpower) for 284 radiotherapy centers, out of potential 2050, were analyzed. Results were presented as crude percentage and matched to point current status. The analysis showed that CLINAC accelerators are the most popular (82.7%), as well as, ADAC (43.7%) and Focus (CMS) (27.4%) systems for therapy planning. Movement towards virtual simulation is evident (59.3%), although classic "simulation" is not fully eliminated from the radiotherapy chain. The most popular brachytherapy afterloader is Microselectron HDR (71%). About 64.4% centers use IMPAC communication/verification/record system that seems more open than Varis. All centers practice modern radiotherapy modalities and techniques (CPRT, IMRT, SRS/SRT, TBI, IORT, IVBHRT, HDR BHRT, etc.). CT and MRI availability is out of question, but PET is available in 3% of centers, however this percentage is rapidly growing. Up to 350 new patients per year are treated by one accelerator (about 35 pts. a day). Centers are relatively small and utilize 2-3 accelerators on average. Average FTE staffing norm is 4 radiation oncologists, 2-3 medical radiotherapy physicists, about 3 certified medical dosimetrists and about 6 radiotherapy technologists. In the past 5 years relative stagnation in classic radiotherapy has been observed. In spite of substantial investments in technology and consequent improvements, as well as wide introduction of computers in radiotherapy, radiotherapy results have not changed significantly. Vendor developement strategies do not point that

  3. Massachusetts Institute of Technology, Plasma Fusion Center, technical research programs

    International Nuclear Information System (INIS)

    1982-02-01

    Research programs have produced significant results on four fronts: (1) the basic physics of high-temperature fusion plasmas (plasma theory, RF heating, development of advanced diagnostics and small-scale experiments on the Versator tokamak and Constance mirror devices); (2) major confinement results on the Alcator A and C tokamaks, including pioneering investigations of the equilibrium, stability, transport and radiation properties of fusion plasmas at high densities, temperatures and magnetic fields; (3) development of a new and innovative design for axisymmetric tandem mirrors with inboard thermal barriers, with initial operation of the TARA tandem mirror experimental facility scheduled for 1983; and (4) a broadly based program of fusion technology and engineering development that addresses problems in several critical subsystem areas

  4. 75 FR 39664 - Grant of Authority For Subzone Status Materials Science Technology, Inc. (Specialty Elastomers...

    Science.gov (United States)

    2010-07-12

    ... Status Materials Science Technology, Inc. (Specialty Elastomers and Fire Retardant Chemicals) Conroe... specialty elastomer manufacturing and distribution facility of Materials Science Technology, Inc., located... and distribution of specialty elastomers and fire retardant chemicals at the facility of Materials...

  5. Nutritional status of cancer patients admitted for chemotherapy at the National Kidney and Transplant Institute.

    Science.gov (United States)

    Montoya, J E; Domingo, F; Luna, C A; Berroya, R M; Catli, C A; Ginete, J K; Sanchez, O S; Juat, N J; Tiangco, B J; Jamias, J D

    2010-11-01

    Malnutrition is common among cancer patients. This study aimed to determine the overall prevalence of malnutrition among patients undergoing chemotherapy and to determine the predictors of malnutrition among cancer patients. A cross-sectional study was conducted on 88 cancer patients admitted for chemotherapy at the National Kidney and Transplant Institute, Philippines, from October to November 2009. Subjective Global Assessment (SGA), anthropometric data and demographic variables were obtained. Descriptive statistics, ANOVA and logistic regression analysis were performed between the outcome and variables. A total of 88 cancer patients were included in the study. The mean age of the patients was 55.7 +/- 14.8 years. The mean duration of illness was 9.7 +/- 8.7 months and the mean body mass index (BMI) was 22.9 kg/m2. The mean Karnofsky performance status was 79.3. 29.55 percent of the patients had breast cancer as the aetiology of their illness. 38 patients (43.2 percent) had SGA B and four (4.5 percent) had SGA C, giving a total malnutrition prevalence of 47.7 percent. The patients were statistically different with regard to their cancer stage (p is less than 0.001), weight (p is 0.01), BMI (p is 0.004), haemoglobin level (p is 0.001) and performance status by Karnofsky score (p is less than 0.001), as evaluated by ANOVA. Logistic regression analysis showed that cancer stage and Karnofsky performance score were predictors of malnutrition. About 47.7 percent of cancer patients suffer from malnutrition, as classified by SGA. Only cancer stage and Karnofsky performance status scoring were predictive of malnutrition in this select group of patients.

  6. Transition of the Course Programs in the 40 Years History of Hitachi Institute of Technology

    Science.gov (United States)

    Miura, Osamu; Katsura, Koyo; Takahashi, Masahiko

    In 2010, the Hitachi Institute of Technology reached the 40th anniversary. In the beginning, the institute stood at the product-out-oriented view point and carried out extensive technical education from basis to advanced technology. After the 1990s, transition of the business environment with the globalization caused that the needs of the engineer education required by the business sections have been transformed. As the result, the changes of needs have been reflected for course program of the institute. Nowadays, in addition to the conventional course programs, the engineer education programs for the business competency and human skill have also been focused.

  7. 77 FR 27436 - Stevens Institute of Technology, et al.; Notice of Consolidated Decision on Applications for Duty...

    Science.gov (United States)

    2012-05-10

    ... Number: 12-014. Applicant: California Institute of Technology, Pasadena, CA 91125. Instrument: Nova Nano... DEPARTMENT OF COMMERCE International Trade Administration Stevens Institute of Technology, et al... Constitution Avenue NW, Washington, DC Docket Number: 12-008. Applicant: Stevens Institute of Technology...

  8. Emerging technologies in educational institutions: assets and potential risks

    Directory of Open Access Journals (Sweden)

    François Victor Tochon

    2012-12-01

    Full Text Available This article is a review of some aspects of research on electronic portfolios with a critical analysis of the pros and cons of the invasive use of new technologies for education. Besides the creation and conceptual composition of educative portfolios that help teachers grow professionnally, this instrument implies a formatting around artifacts posited as proofs of competence, which support an uncritical realist ontology that has its limitations. Thus networked learning and personal learning environments stimulate reflective teacher learning, but possibly lead portfolio users to confuse the indicator of performance with the actual competence. Portfolio creation takes much time on other activities that could be most beneficial (and could be complementary, such as shared reflection on personal belief systems. Universalist stands and standardisation seem to take the fore while educative humane value go back stage. The new wave of distance learning creates new risks in terms of depth and quality as well as health, related to the daily use of pulsed microwaves and radio frequencies. It is suggested that a mode of control independent from the financial milieux that capitalize on these innovations should be created.

  9. Harbin Institute of Technology collaborative base project at APS of Argonne

    Science.gov (United States)

    Liu, H.; Liu, L. L.

    2013-05-01

    In this paper, the progress of Harbin Institute of Technology (HIT) collaborative base project, which was launched at Argonne National Laboratory in 2010, will be presented. The staff and students from HIT involved in advanced technological developments, which included tomography, high energy PDF, diffraction and scattering, and inelastic scattering techniques in APS to study structures changes of minerals and materials under high pressure conditions.

  10. Annual Report 2003 of the Institute of Nuclear Chemistry and Technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    The INCT 2003 Annual Report is the review of scientific activities in all branches being developed in the Institute of Nuclear Chemistry and Technology Warsaw. The studies are connected in general with the following fields: radiation chemistry and physics, radiation technologies, radiochemistry, stable isotopes, nuclear analytical methods, chemistry in general, radiobiology, process engineering, material engineering, structural studies, nucleonic control systems and accelerators.

  11. Summer Teacher Enhancement Institute for Science, Mathematics, and Technology Using the Problem-Based Learning Model

    Science.gov (United States)

    Petersen, Richard H.

    1997-01-01

    The objectives of the Institute were: (a) increase participants' content knowledge about aeronautics, science, mathematics, and technology, (b) model and promote the use of scientific inquiry through problem-based learning, (c) investigate the use of instructional technologies and their applications to curricula, and (d) encourage the dissemination of TEI experiences to colleagues, students, and parents.

  12. National Institute for Technology in Liberal Education: An Assessment. White Paper

    Science.gov (United States)

    Brodeur, Jason; Daniels, Morgan; Johnson, Annie; Nicholls, Natsuko; Pickle, Sarah; Waraksa, Elizabeth A.

    2016-01-01

    In 2001, the National Institute for Technology in Liberal Education (NITLE) was created to "stimulate collaboration between selected liberal arts colleges and to act as a catalyst for the effective integration of emerging and newer digital technologies into teaching, learning, scholarship, and information management." In July 2015, NITLE…

  13. Developing the mechatronics and robotics at Nizhny Tagil Technological Institute of Ural Federal University

    Science.gov (United States)

    Goman, V. V.; Fedoreev, S. A.

    2018-02-01

    This report concerns the development trends of education in the field of the Mechatronics and Robotics at Nizhny Tagil Technological Institute (branch of Ural Federal University). The paper considers new teaching technologies, experience in upgrade of the laboratory facilities and some results of development Mechatronics and Robotics educational courses.

  14. Annual Report 2003 of the Institute of Nuclear Chemistry and Technology

    International Nuclear Information System (INIS)

    2004-01-01

    The INCT 2003 Annual Report is the review of scientific activities in all branches being developed in the Institute of Nuclear Chemistry and Technology Warsaw. The studies are connected in general with the following fields: radiation chemistry and physics, radiation technologies, radiochemistry, stable isotopes, nuclear analytical methods, chemistry in general, radiobiology, process engineering, material engineering, structural studies, nucleonic control systems and accelerators

  15. Supplier strategies and responses to institutional drivers for an emerging energy technology

    International Nuclear Information System (INIS)

    Strachan, N.; Dowlatabadi, H.

    2004-01-01

    This paper investigates the role of suppliers of a new energy technology, when the market for that technology continues to be in a state of flux, and is characterised by continued regulatory and institutional developments. This paper first summarises the institutional drivers resulting in the widely divergent diffusion of distributed generation (DG) based on natural gas engines in the Netherlands and the UK. Then, supplier responses to this institutionally driven market are discussed. Under regulatory support, supply firms were able to implement innovative operational and ownership arrangements, hugely growing the market while positioning themselves for new R and D and market developments. Under regulatory restrictions, supply firms fought to survive, with resultant implications for the reputation and longer term prospects for this new energy technology. The paper concludes by discussing how continuing institutional instability can limit the supplier strategies based on spillovers from successful regulatory experiments, Thus, the establishment of a viable energy supply industry is delayed under continuing regulatory uncertainty. (author)

  16. Technology readiness levels and technology status for selected long term/high payoff technologies on the RLV program

    Science.gov (United States)

    Rosmait, Russell L.

    1996-01-01

    The development of a new space transportation system in a climate of constant budget cuts and staff reductions can be and is a difficult task. It is no secret that NASA's current launching system consumes a very large portion of NASA funding and requires a large army of people to operate & maintain the system. The new Reusable Launch Vehicle (RLV) project and it's programs are faced with a monumental task of making the cost of access to space dramatically lower and more efficient than NASA's current system. With pressures from congressional budget cutters and also increased competition and loss of market share from international agencies RLV's first priority is to develop a 'low-cost, reliable transportation to earth orbit.' One of the RLV's major focus in achieving low-cost, reliable transportation to earth orbit is to rely on the maturing of advanced technologies. The technologies for the RLV are numerous and varied. Trying to assess their current status, within the RLV development program is paramount. There are several ways to assess these technologies. One way is through the use of Technology Readiness Levels (TRL's). This project focused on establishing current (summer 95) 'worst case' TRL's for six selected technologies that are under consideration for use within the RLV program. The six technologies evaluated were Concurrent Engineering, Embedded Sensor Technology, Rapid Prototyping, Friction Stir Welding, Thermal Spray Coatings, and VPPA Welding.

  17. How knowledge and technology are created in a research institute

    Energy Technology Data Exchange (ETDEWEB)

    Monteiro, Carlos Anisio; Barroso, Antonio Carlos de Oliveira, E-mail: monteiro@ipen.b, E-mail: barroso@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2011-07-01

    Collaboration within and across R and D teams is a naturally occurring socio-technical process and it seems to be a very good thrust for technology development and knowledge creation, transfer and preservation in R and D organizations. The study has focused on evidence gathered from: (a) the publication data base of IPEN from 2001 to 2008 was used to generate four time evolving networks of co-authorship, considering time slices of two years; (b) authors 'demographic' data were included as node attributes in the networks; and (c) questionnaire surveys and interviews to understand the reasons which influence a person to search and choose partner to co-work in a research. Social network analysis was used extensively to understand the network configurations, their time evolution, the key actors, groups and their role in this network. A few indexes and algorithms were used to get insight into the networks structures. A variety of centrality indicators were used to better characterize key actors and better understand their position and role in the network. Also many grouping techniques were used to find the most prominent/active groups. For the most central authors or groups, demographic data was cross analyzed with their network indexes to get check for a few hypothesis of preferential attachment. Finally, based on the proper theoretical background and the information gathered with questionnaires and interviews a model was devised to explain the propensity to collaborate. This paper reports the general ideas of the whole research and presents the most important results of the network analysis. (author)

  18. How knowledge and technology are created in a research institute

    International Nuclear Information System (INIS)

    Monteiro, Carlos Anisio; Barroso, Antonio Carlos de Oliveira

    2011-01-01

    Collaboration within and across R and D teams is a naturally occurring socio-technical process and it seems to be a very good thrust for technology development and knowledge creation, transfer and preservation in R and D organizations. The study has focused on evidence gathered from: (a) the publication data base of IPEN from 2001 to 2008 was used to generate four time evolving networks of co-authorship, considering time slices of two years; (b) authors 'demographic' data were included as node attributes in the networks; and (c) questionnaire surveys and interviews to understand the reasons which influence a person to search and choose partner to co-work in a research. Social network analysis was used extensively to understand the network configurations, their time evolution, the key actors, groups and their role in this network. A few indexes and algorithms were used to get insight into the networks structures. A variety of centrality indicators were used to better characterize key actors and better understand their position and role in the network. Also many grouping techniques were used to find the most prominent/active groups. For the most central authors or groups, demographic data was cross analyzed with their network indexes to get check for a few hypothesis of preferential attachment. Finally, based on the proper theoretical background and the information gathered with questionnaires and interviews a model was devised to explain the propensity to collaborate. This paper reports the general ideas of the whole research and presents the most important results of the network analysis. (author)

  19. Fifteen year's research activities of the INSS Institute of Nuclear Technology and future policy

    International Nuclear Information System (INIS)

    Kimura, Itsuro

    2008-01-01

    Fifteen years have passed since the Institute of Nuclear Safety System, Incorporated (INSS) was founded. This paper reviews the research activities of the Institute of Nuclear Technology in INSS over that time and proposes a policy for future research. First, a chronological table shows the major milestones over the past fifteen years. Notable events include the following. The head office was moved to Mihama-cho where laboratories and experimental facilities were installed; the Institute signed an agreement with the Kansai Electric Power Co., Inc. (KEPCO) on assistance for the preparedness of nuclear emergency; it assisted KEPCO to investigate the causes of the accident at its Mihama Nuclear Power Station Unit 3 and subsequently established the Nuclear Power Plant Aging Research Center, it began providing information on adverse events occurred at nuclear power plants in the world to Japanese electric utilities that own PWRs; it supported the Energy Research and Development Centralization Plan of Fukui Prefecture, and it embarked on a project to develop the Fukui regional cluster in the Fukui and Kinki area under the government's program for aging management of nuclear power plants. The fifteen years of research activities are shown for each research group and for each research project, and then important achievements of the major research projects are described. Finally, the status of research papers published in external Journals and in INSS over the past fifteen years is illustrated and the number of patents acquired during this period is presented. We evaluated our research activities over the fifteen years and reviewed them according to seven items under a future research policy. The plans include the enhancement of system engineering-based research efforts as the name of this Institute implies, and committing ourselves to forward-looking and creative research program focusing on not only from analysis', but also on 'synthesis'. A suitable approach to safety

  20. Bonding experiences with Ecuadorian society from the attention to diversity in the Bolivarian Technological Institute of Technology

    Directory of Open Access Journals (Sweden)

    Wendy Roxana Cortés-Guerrero

    2016-09-01

    Full Text Available This work aims to systematize the results obtained with the Institutional implemented in the Bolivarian Technological Institute of Technology in the city of Guayaquil in the Republic of Ecuador Program Linking with Society “COMMUNITY HEALTH”. From his humanistic approach and attention to diversity, is extended permanently services to society, to articulate academia-research community, comes in this way to the most vulnerable populations of the city and surrounding counties. The indicators evaluated, allow to high light a successful evolution of the program, to encourage the improvement and expansion of services provided by students and professional teachers in different branches.

  1. Status and prospects of fuel cell technology in Europe

    International Nuclear Information System (INIS)

    Van Dijkum

    1998-01-01

    Fuel Cells attract a lot of press attention today and an some example of a recent press heading is: ''Orders for Onsi's fuel cells hit $111 million''. The principle of fuel cell technology is explained and examples of realized applications given. In short: fuel cells can be used everywhere where power (and heat) is needed. Regarding the status of fuel cells, Europe is way behind Japan and the US. The 15 PAFC-200 kWe units in operation in Europe (worldwide > 90 units) produced 46,796 MWhe during 296,704 cumulative operating hours with an availability % over 70.00. The world record on continuous operation is held by Japan with 9,478 hours reached at 14th September 1996 and two PAFC-units passed their 40,000 hours of cumulative operation (US and Japan). In Japan, market enabling support is continued with subsidies of one third of the costs for 7 PAFC-units. In the Netherlands, Energy Distribution Companies test their tubular 100 kWe SOFC-unit. During 1,335 hours of continuous operation, the unit produced 165 MWhe in total at 3rd March. EnergieNed, CLC/Ansaldo and Gastec evaluated changes for co-generation and small power production with packaged fuel cell power plants in EU and EFTA countries. In general the authors concluded that implementation of fuel cell power plants in all EU and EFTA countries will be probably possible with today' s technical regulations. On might wonder: What has fuel cell technology to offer in one of the most efficient and low-priced gas economies in Europe, the Netherlands. An example of efficient energy use are greenhouses with artificial lighting and CO 2 -fertilization and energy (heat) storage device. Applying relatively favorable depreciation periods and (utility) interest rate, a PAFC 200 kWe generates just a positive return (IRR = 1.7 % after taxes and subsidies) when part of a gas-engine capacity is replaced

  2. Biomass torrefaction technology: Techno-economic status and future prospects

    International Nuclear Information System (INIS)

    Batidzirai, B.; Mignot, A.P.R.; Schakel, W.B.; Junginger, H.M.; Faaij, A.P.C.

    2013-01-01

    Torrefaction is a promising bioenergy pre-treatment technology, with potential to make a major contribution to the commodification of biomass. However, there is limited scientific knowledge on the techno-economic performance of torrefaction. This study therefore improves available knowledge on torrefaction by providing detailed insights into state of the art prospects of the commercial utilisation of torrefaction technology over time. Focussing on and based on the current status of the compact moving bed reactor, we identify process performance characteristics such as thermal efficiency and mass yield and discuss their determining factors through analysis of mass and energy balances. This study has shown that woody biomass can be torrefied with a thermal and mass efficiency of 94% and 48% respectively (on a dry ash free basis). For straw, the corresponding theoretical energetic efficiency is 96% and mass efficiency is 65%. In the long term, the technical performance of torrefaction processes is expected to improve and energy efficiencies are expected to be at least 97% as optimal torgas use and efficient heat transfer are realised. Short term production costs for woody biomass TOPs (torrefied pellets) are estimated to be between 3.3 and 4.8 US$/GJ LHV , falling to 2.1–5.1 US$/GJ LHV in the long term. At such cost levels, torrefied pellets would become competitive with traditional pellets. For full commercialisation, torrefaction reactors still require to be optimised. Of importance to torrefaction system performance is the achievement of consistent and homogeneous, fully hydrophobic and stable product, capable of utilising different feedstocks, at desired end-use energy densities. - Highlights: • Woody biomass torrefaction thermal efficiency is 94% and mass efficiency is 48% on a daf basis. • Straw theoretical torrefaction energetic efficiency is 96% and mass efficiency is 65%. • Current woody TOPs production costs are between 3.3 and 4.8 US$/GJ LHV , 50

  3. 700 C power plant technology. Status and challenge

    Energy Technology Data Exchange (ETDEWEB)

    Tschaffon, Helmut [E.ON Energie AG, Muenchen (Germany)

    2010-07-01

    Coal will remain an indispensable major source of energy for power generation in the world in the coming decades, because there are resources for hundreds of years. Coal fired power plants can be operated very flexible which gets increasing importance due to the stochastic input from regenerative energies like wind and solar energy. Sustainable technologies for cool-fired power plants have to be developed to optimise environmental protection and to save valuable resources and reduce CO{sub 2}-emissions. Future coal fired steam power plants aim an elevated steam temperature of about 700 C to reach a net efficiency of about 50%. This paper will give an overview over the status of the development of the 700 C technology and will highlight the challenges to be overcome before their commercial use. The European way to a 700 C Power plant started with the project AD700 in the year 1998. In this project the basic design of a 400 MW demo plant was done and some material tests and component qualifications for nickel-based alloys and new austenitic steels were started and terminated. AD700 delivered the basis of the design of the Component Test Facility COMTES700 (RFCS funded project with European manufacturers and utilities). COMTES 700 was operated between 2005 and 2009. It was integrated into the E.ON power plant Scholven in Germany to test mainly nickel based materials and power plant components. In the project NRWPP700 (2006-2010, funded by NRW and financed by European utilities) the detail design of the steam generator, piping system and turbine of a 500 MW power plant was done. In 7 material projects the qualification of components and materials was supported. At the same time of lot of national and international R and D projects (e.g. MARCKO and COORETEC) were performed. Due to the high amount of these projects they cannot be mentioned here in a detailed way. In 2007 the E.ON project 50plus was started. The aim was to plan and build a 700 C demo plant in

  4. Prosthetic Status and Prosthetic Need Among the Patients Attending Various Dental Institutes of Ahmedabad and Gandhinagar District, Gujarat

    OpenAIRE

    Shah, Vrinda R.; Shah, Darshana N.; Parmar, Chaitanya H.

    2012-01-01

    The oral health being an integral part for the healthy living, necessity of disability limitation and rehabilitation in oral health has taken a paramount role. To assess the prosthetic status and to evaluate the prosthetic needs of the patients attending various institutes of Ahmedabad and Gandhinagar district. A total of 510 (264 males and 246 females) subjects at various dental institutes were examined in the study. A survey proforma was prepared with the help of WHO oral health assessment ...

  5. Current status of assisted reproductive technology in Korea, 2011.

    Science.gov (United States)

    Lee, Gyoung Hoon; Song, Hyun Jin; Lee, Kyu Sup; Choi, Young Min

    2016-03-01

    The number of assisted reproductive technology (ART) clinics, ART cycles, clinical pregnancy rate (CPR), and number of newborns conceived using ART have steadily increased in South Korea. This aim of this study was to describe the status of ART in South Korea between January 1 and December 31, 2011. A localized online survey was created and sent to all available ART centers via email in 2015. Fresh embryo transfer (FET) cases were categorized depending on whether standard in vitro fertilization, intracytoplasmic sperm injection (ICSI), or half-ICSI procedures were used. Thawed embryo transfer (TET) and other related procedures were surveyed. Data from 36,990 ART procedures were provided by 74 clinics. Of the 30,410 cycles in which oocytes were retrieved, a complete transfer was performed in 91.0% (n=27,683). In addition, 9,197 cycles were confirmed to be clinical pregnancies in the FET cycles, representing a pregnancy rate of 30.2% per oocyte pick-up and 33.2% per ET. The most common number of embryos transferred in the FET procedures was three (38.1%), followed by two (34.7%) and one (14.3%). Of the 8,826 TET cycles, 3,137 clinical pregnancies (31.1%) were confirmed by ultrasonography. While the overall clinical pregnancy rate for the TET cycles performed was lower than the rate reported in 2010 (31.1% vs. 35.4%), the overall CPR for the FET cycles was higher than in 2010 (33.2% in 2011 and 32.9% in 2010). The most common number of embryos transferred in FET cycles was three, as was the case in 2010.

  6. The performing interaction between institutions and technology in the French electronuclear industry

    International Nuclear Information System (INIS)

    Finon, D.; Staropoli, C.

    2000-10-01

    Among the various traditional ''grands programmes'' typical of the French public intervention in high-tech industries, the nuclear programme is often considered as one of the major successes. However in recent years, the French national nuclear system, as composed of the whole set of institutions and relations between organisations in this sector, is affected by different exogenous shocks. In disorder those shocks are the European power markets liberalization legislation, the persistence of the world-wide nuclear market depression, the competition of a new power generation technology (gas turbine), and the globalization and concentration of the world-wide electromechanical industry. So, in the power industry of many OECD countries, the social acceptance crisis of nuclear technology as well as the emergence of the much less capital-intensive gas turbine relax the co-determination and open up the institutional choice. Conversely, in France, the performances of the nuclear program help to maintain the nuclear option, thus justifying the preservation of the existing industrial organisation and institutional scheme. In order to characterise the joint institutional and technological dynamics of the French electricity supply industry two stages are distinguished and discussed: first the efficient adaptation of institutions and industrial relationships to the nuclear as a new technology, and second the influence of technological features on the industry structures changes. (A.L.B.)

  7. The performing interaction between institutions and technology in the French electronuclear industry

    Energy Technology Data Exchange (ETDEWEB)

    Finon, D.; Staropoli, C

    2000-10-01

    Among the various traditional ''grands programmes'' typical of the French public intervention in high-tech industries, the nuclear programme is often considered as one of the major successes. However in recent years, the French national nuclear system, as composed of the whole set of institutions and relations between organisations in this sector, is affected by different exogenous shocks. In disorder those shocks are the European power markets liberalization legislation, the persistence of the world-wide nuclear market depression, the competition of a new power generation technology (gas turbine), and the globalization and concentration of the world-wide electromechanical industry. So, in the power industry of many OECD countries, the social acceptance crisis of nuclear technology as well as the emergence of the much less capital-intensive gas turbine relax the co-determination and open up the institutional choice. Conversely, in France, the performances of the nuclear program help to maintain the nuclear option, thus justifying the preservation of the existing industrial organisation and institutional scheme. In order to characterise the joint institutional and technological dynamics of the French electricity supply industry two stages are distinguished and discussed: first the efficient adaptation of institutions and industrial relationships to the nuclear as a new technology, and second the influence of technological features on the industry structures changes. (A.L.B.)

  8. Level of physical activity, cardiorespiratory fitness and nutritional status of higher education institution servers

    Directory of Open Access Journals (Sweden)

    Leonardo Vidal Andreato

    2017-04-01

    Full Text Available Objective: to evaluate the level of physical activity, cardiorespiratory fitness and nutritional status of Brazilian higher education institution servers. Method: 134 public servants (80 men and 54 women were evaluated to estimate body mass index (BMI, waist circumference (WC, waist/hip ratio (WHR, aerobic fitness and blood pressure at rest. Results: most of the servers were classified as insufficiently active (62%. BMI results show a high prevalence of obesity (39% mild and 33% moderate. WC showed a prevalence of high (30% and very high risk (27%, and WHR showed a prevalence of high (28% or very high risk (12%. The ergometric test showed that 41% of the servers presented very poor (17% or poor (24% aerobic fitness and 23%, regular aerobic fitness. Considering blood pressure, 15% of the servers presented blood pressure considered as borderline and 30% considered as hypertension. No associations were found between physical condition (active or inactive with WC (χ2 = 3.4, p = 0.179, WHR (χ2 = 7.0, p = 0.073, aerobic fitness (χ2 = 4.3, p = 0.368 and blood pressure (χ2 = 2.9, p = 0.734. Although no association was observed between physical activity and BMI (χ2 = 7.6, p = 0.062, significance values (p < 0.07 suggested an association trend, with worse ratings for the sedentary group. Closing remarks: among higher education institution servers, there is high prevalence of physical inactivity, obesity and risk factors, and the majority of the sample had aerobic fitness below recommended levels.

  9. Current status of development in dry pyro-electrochemical technology of SNF reprocessing

    International Nuclear Information System (INIS)

    Bychkov, A.V.; Skiba, O.V.; Kormilitsyn, M.V.

    2004-01-01

    The technology of SNF management in molten salts currently developed by a group of institutes headed by RIAR has had several stages of development: - basic research of uranium, plutonium and main FP properties (investigation and reprocessing of different kinds of SNF in 1960 - 1970); - development of the equipment and implementation of the pyro-electrochemical technology of granulated UPu fuel production. Development of the vibro-packing method and in-pile testing of vibro-packed fuel pins with granulated fuel as the most 'logical' continuation of reprocessing: implementation of the technology for BOR-60 and BN-600 (1980 - 1990); - development of closed fuel cycle elements. Checking of the technology using batches of SNF. In-pile tests. Feasibility study of the closed fuel cycle (CFC). Study of application of the technology to other objects (transmutation; nitride, cermet and other fuels) (1980 - 1990). The current status of the research is the following: - Basic research. Properties of uranium, plutonium, thorium, and neptunium in chloride melts have been studied in much detail. The data on physical chemistry and electrochemistry of the main FP is enough for understanding the processes. Detailed studies of americium, curium, and technetium chemistry are the essential investigation directions; - Engineering development. The technology and equipment bases have been developed for the processes of oxide fuel reprocessing and fabrication. The technology was checked using 5500 kg of pure fuel from different reactors and 20 kg of irradiated BN-350 and BOR-60 fuel. The bases of the technology have been provided and the feasibility study has been carried out for a full-scale plant of BN-800 CFC; - Industrial application: Since the technology is highly prepared, the activities on industrial application of U-Pu fuel are now underway. The BOR-60 reactor uses fuel obtained by the dry method, the design of the facility for implementation of CFC reactors is being developed. 9

  10. Status of higher education in nuclear technology in Pakistan

    International Nuclear Information System (INIS)

    Sadiq, A.

    2007-01-01

    Pakistan's nuclear power program was formally launched in 1959 with the establishment of the Pakistan Atomic Energy Commission (PAEC). The first research reactor, the Pakistan Research Reactor (PARR1), went critical in 1965, while the first nuclear power plant, the Karachi Nuclear Power Plant (KANUPP), was connected to the grid in 1972. PARR1, a 5 MW highly enriched uranium swimming pool reactor, has been upgraded to 10 MW low enriched reactor and KANUPP is a 137 MWe CANDU reactor. Later during the mid eighties PAEC added another small research reactor, PARR2, a miniature neutron source, and in 2000 a 325 MW PWR at Chashma, the Chashma Nuclear Power Plant (CHASHNUPP). Thus PAEC currently owns and operates two nuclear power plants and two research reactors. KANUPP has completed its design life of 30 years and is now undergoing the re-licensing process. CHASNUPP has just completed its first refuelling outage. Negotiations for the third nuclear power plant, also a 300 MW PWR from China, are continuing. The training and education programs in nuclear technology were initiated in the early 1960's soon after the establishment of PAEC. Initially the cream of fresh graduates in engineering, medicine and natural sciences, who were inducted in PAEC were given short training before they were sent for higher studies abroad. The availability of a nucleus of highly qualified professionals in nuclear power and allied disciplines, the lack of adequate facilities in the local educational institutions in these fields and the realization that many more professionals will be needed than could be trained abroad led to the establishment of coherent indigenous training and education program in the late sixties. Given below is a brief description of the centers set up by the PAEC for providing manpower for its nuclear power program

  11. Status of the Moderator Circulation Tests at Korea Atomic Energy Research Institute

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyoungtae; Rhee, Bowook; Cha, Jaeeun; Choi, Hwalim [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2013-05-15

    The scaling analysis produced the design parameters of the MCT facility, and the manufacturing process is ongoing. The application of the optical fluid measurements to the MCT was preliminary tested by small scale test models. The various flow patterns arising from a complex interaction between the buoyancy and inertia forces can be simulated in the MCT facility. In addition, the experimental results will be compared with the CFD results. The Korea Atomic Energy Research Institute (KAERI) started experimental research on moderator circulation as one of its national R and D research programs in 2012. In the present paper, we introduce a scaling analysis performed to extend the scaling criteria suitable for reproducing thermal-hydraulic phenomena in a scaled-down CANDU-6 moderator tank, 1/40 and 1/8 small-scale model tests to identify the potential problems of the flow visualization and measurement in the main 1/4 scale MCT (Moderator Circulation Test) facility, a manufacturing status of the 1/4 scale moderator tank, and preliminary CFD analysis results to determine the flow, thermal, and heating boundary conditions with which the various flow patterns expected in the prototype CANDU-6 moderator tank can be reproduced in the experiment. KAERI has launched an experimental program for moderator circulation in a CANDU6 reactor.

  12. The Status of Quality Assurance and Accreditation Systems within Higher Education Institutions in the Republic of Yemen

    Science.gov (United States)

    Anaam, Mahyoub Ali; Alhammadi, Abdullah Othman; Kwairan, Abdulwahab Awadh

    2009-01-01

    The purpose of this paper is to provide an overview of the status of quality assurance and accreditation systems within higher education institutions in Yemen. The paper initially describes the stages of development and changes that have occurred in the field of quality and accreditation in Yemeni higher education. The paper shows that no formal…

  13. Status of higher education in nuclear technology in Pakistan

    International Nuclear Information System (INIS)

    Ahmad, N.

    2007-01-01

    To harness the benefits of nuclear energy and the applications of radiation and radionuclides in various disciplines, a broad and deeply rooted nuclear education is essential. To cater to its needs, the Pakistan Atomic Energy Commission has established training institutes/centres of higher education. This paper briefly describes the programmes offered by these institutes/centres. (author)

  14. The investigative training of teachers: an imperative for higher technological institute Ecuador

    Directory of Open Access Journals (Sweden)

    Belinda Marta Lema-Cachinell

    2016-05-01

    Full Text Available In work addresses some theoretical considerations - related methodological pedagogical and psychological research training budgets of teachers of technical and technological institutes, its foundations, characterizing the research training and how they are defined from educational policy , its components and features for the development of research skills in the process of training of technicians and technologists in the Commercial Institute of Technology and Vocational Training Administration and the importance to comprehensive training, as part of the changes that are experienced in higher education currently in the Ecuador , which must be analyzed in a broader dimension , not disjointed from the changes occurring in the world and the region.

  15. Current status and technology development tendency of research reactors in china

    International Nuclear Information System (INIS)

    Ke Guotu; Shen Feng; Zhao Shouzhi; Zhang Weiguo; Yuan Luzheng

    2009-01-01

    The current status and development history of domestic and abroad research reactors (RRs) are mentioned. The representative RRs and their respective technology characteristics are introduced. The utilizations of China's RRs, mainly included as nuclear engineering technology, basic research applications of nuclear technology, teaching and personnel training, are explained. (authors)

  16. A Quantitative Examination of the Educational Technology Characteristics of Ohio Schools and Their Blue Ribbon Status

    Science.gov (United States)

    Goon, Dean A.

    2012-01-01

    The purpose of this study was to analyze data from Ohio schools and the frequency of use of educational technology, a teacher's comfort level using technology, and a teacher's beliefs about the effect of educational technology on teaching and learning based upon the school's Blue Ribbon award status. The study used an ex-post facto, quantitative…

  17. R&D status of linear collider technology at KEK

    Science.gov (United States)

    Urakawa, Junji

    1992-02-01

    This paper gives an outline of the Japan Linear Collider (JLC) project, especially JLC-I. The status of the various R&D works is particularly presented for the following topics: (1) electron and positron sources, (2) S-band injector linacs, (3) damping rings, (4) high power klystrons and accelerating structures, (5) the final focus system. Finally, the status of the construction and design studies for the Accelerator Test Facility (ATF) is summarized.

  18. An Institutional Framework to Explain the University: Industry Technology Transfer in a Public University of Mexico

    OpenAIRE

    Puerta Sierra, Lizbeth Magdalena; Marín Vargas, Ma. Enselmina; López Torres, Virginia Guadalupe

    2017-01-01

    In the last years, studies and modifications to the science and technology regulatory framework in Mexico show the increase in the attention to transfer the research results of professors and researchers from higher education institutions, towards the productive sector with the purpose of generating regional, national and international growth and development. This study has conducted to the search of the factors that determine the increase of linkage activities and technology transfer. Based ...

  19. Education program at the Massachusetts Institute of Technology research reactor for pre-college science teachers

    International Nuclear Information System (INIS)

    Hopkins, G.R.; Fecych, W.; Harling, O.K.

    1989-01-01

    A Pre-College Science Teacher (PCST) Seminar program has been in place at the Massachusetts Institute of Technology (MIT) Nuclear Reactor Laboratory for 4 yr. The purpose of the PCST program is to educate teachers in nuclear technology and to show teachers, and through them the community, the types of activities performed at research reactors. This paper describes the background, content, and results of the MIT PCST program

  20. Annual Report of the Institute of Nuclear Chemistry and Technology 2000

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-06-01

    The INCT 2000 Annual Report is the review of scientific activities in all branches being developed in the Institute of Nuclear Chemistry and Technology Warsaw. The studies are connected in general with the following fields: radiation chemistry and physics, radiation technologies, radiochemistry, stable isotopes, nuclear analytical methods, chemistry in general, radiobiology, process engineering, material engineering, structural studies and diagnostics and nucleonic control systems and accelerators.

  1. Annual Report of the Institute of Nuclear Chemistry and Technology 2000

    International Nuclear Information System (INIS)

    2001-06-01

    The INCT 2000 Annual Report is the review of scientific activities in all branches being developed in the Institute of Nuclear Chemistry and Technology Warsaw. The studies are connected in general with the following fields: radiation chemistry and physics, radiation technologies, radiochemistry, stable isotopes, nuclear analytical methods, chemistry in general, radiobiology, process engineering, material engineering, structural studies and diagnostics and nucleonic control systems and accelerators

  2. Institutional dynamics and technology legitimacy - A framework and a case study on biogas technology

    NARCIS (Netherlands)

    Markard, Jochen; Wirth, Steffen; Truffer, Bernhard

    2016-01-01

    Legitimacy is central for both novel and established technologies to mobilize the resources necessary for growth and survival. A loss of legitimacy, in turn, can have detrimental effects for an industry. In this paper, we study the rise and fall of technology legitimacy of agricultural biogas in

  3. Appraising the Cost Efficiency of Higher Technological and Vocational Education Institutions in Taiwan Using the Metafrontier Cost-Function Model

    Science.gov (United States)

    Lu, Yung-Hsiang; Chen, Ku-Hsieh

    2013-01-01

    This paper aims at appraising the cost efficiency and technology of institutions of higher technological and vocational education. Differing from conventional literature, it considers the potential influence of inherent discrepancies in output quality and characteristics of school systems for institutes of technology (ITs) and universities of…

  4. VRdose: an exposure dose evaluation system based on virtual reality technology - current status and future possibilities

    International Nuclear Information System (INIS)

    Iguchi, Yukihiro; Louka, Michael; Johnsen, Terje

    2004-01-01

    The Fugen Nuclear Power Station (NPS) was shut down permanently in March 2003, and preparatory activities are underway to decommission the Fugen NPS. It is necessary to accomplish the decommissioning economically and rationally by optimizing the workload, exposure dose and waste mass. This is important at the planning stage of the decommissioning. Virtual reality (VR) technology may prove beneficial to this process with regard to minimizing the workers' radiation exposure as well as contributing towards achieving efficient use of manpower. It could also be a valuable tool in the actual dismantling phase. In addition to this, VR provides an effective medium in presentations for public acceptance as well as for communication with relevant engineers. The VRdose project conducted by Japan Nuclear Cycle Development Institute (JNC) and Halden Virtual Reality Centre is doing research and development of VR technology for use in the decommissioning process at the Fugen NPS. This is technically an extensive project, touching on many of the present challenges in the VR area such as visual simulation and animation, interaction with objects in a virtual environment and scenario generation and optimisation. This paper describes the present status and future of the system. (Author)

  5. Planetary Science Technology Infusion Study: Findings and Recommendations Status

    Science.gov (United States)

    Anderson, David J.; Sandifer, Carl E., II; Sarver-Verhey, Timothy R.; Vento, Daniel M.; Zakrajsek, June F.

    2014-01-01

    The Planetary Science Division (PSD) within the National Aeronautics and Space Administrations (NASA) Science Mission Directorate (SMD) at NASA Headquarters sought to understand how to better realize a scientific return on spacecraft system technology investments currently being funded. In order to achieve this objective, a team at NASA Glenn Research Center was tasked with surveying the science and mission communities to collect their insight on technology infusion and additionally sought inputs from industry, universities, and other organizations involved with proposing for future PSD missions. This survey was undertaken by issuing a Request for Information (RFI) activity that requested input from the proposing community on present technology infusion efforts. The Technology Infusion Study was initiated in March 2013 with the release of the RFI request. The evaluation team compiled and assessed this input in order to provide PSD with recommendations on how to effectively infuse new spacecraft systems technologies that it develops into future competed missions enabling increased scientific discoveries, lower mission cost, or both. This team is comprised of personnel from the Radioisotope Power Systems (RPS) Program and the In-Space Propulsion Technology (ISPT) Program staff.The RFI survey covered two aspects of technology infusion: 1) General Insight, including: their assessment of barriers to technology infusion as related to infusion approach; technology readiness; information and documentation products; communication; integration considerations; interaction with technology development areas; cost-capped mission areas; risk considerations; system level impacts and implementation; and mission pull. 2) Specific technologies from the most recent PSD Announcements of Opportunities (AOs): The Advanced Stirling Radioisotope Generator (ASRG), aerocapture and aeroshell hardware technologies, the NASA Evolutionary Xenon Thruster (NEXT) ion propulsion system, and the

  6. The Regional Research And Development Centre of the Asean Institute of Technology, Bangkok

    OpenAIRE

    anonymous anonymous

    2017-01-01

    The Asian Institure of Technology (AJT) is an autonomouse, International postgraduate Institute. It provides advanced education in engenering, science and allied fields through academic programme loading to Master's and Doctoral degree and Diplomat, and through research programmes are related  closely to the needs of Asia.

  7. Revisiting the Reusability and Openness of Resources in the Massachusetts Institute of Technology Open Courseware

    Science.gov (United States)

    Nkuyubwatsi, Bernard

    2018-01-01

    The marketing of the Massachusetts Institute of Technology (MIT) Open Courseware gives the impression that it has the potential to contribute to quality open learning and opening up higher education globally. It is from this perspective that the potential contribution of Open Educational Resources (OER) units in the MIT Open Courseware to opening…

  8. System of application of information technologies as a means of increasing education quality at the institute

    Directory of Open Access Journals (Sweden)

    Светлана Юрьевна Рубцова

    2009-09-01

    Full Text Available The article dwells on the essence of application of new information technologies in academic process at educational institution as one of the means of increasing quality of education. It will be achieved & supported by implementing automation education systems (AES based on module & system logics for preparing specialists, as well as working out & implementing didactic complex of automation education systems.

  9. Radioactive waste management in Centre for nuclear technologies and investigations, Institute VINCA

    International Nuclear Information System (INIS)

    Avramovic, I.

    2007-01-01

    Responsible radioactive waste management requires the implementation of measures that will afford protection of human health and the environment. Radioactive waste management system was improved in Center for Nuclear Technology and Research, Institute VINCA, during 2006 and 2007 regarding the activities of spent fuel removal and R-A research reactor decommissioning [sr

  10. The Next Frontier in Making Disciples: 21st-Century Technology Use in CCCU Member Institutions

    Science.gov (United States)

    Boden, Karen E.

    2012-01-01

    An unprecedented opportunity exists for Christian colleges and universities to utilize 21st-century technology and the impact of globalization to broaden the use of distance learning for missional purposes through their educational offerings. Some institutions offer open education that allows those with Internet access to take courses at no cost…

  11. Making Learning and Web 2.0 Technologies Work for Higher Learning Institutions in Africa

    Science.gov (United States)

    Lwoga, Edda

    2012-01-01

    Purpose: This paper seeks to assess the extent to which learning and Web 2.0 technologies are utilised to support learning and teaching in Africa's higher learning institutions, with a specific focus on Tanzania's public universities. Design/methodology/approach: A combination of content analysis and semi-structured interviews was used to collect…

  12. Nanotechnology Laboratory Continues Partnership with FDA and National Institute of Standards and Technology | Poster

    Science.gov (United States)

    The NCI-funded Nanotechnology Characterization Laboratory (NCL)—a leader in evaluating promising nanomedicines to fight cancer—recently renewed its collaboration with the U.S. Food and Drug Administration (FDA) and the National Institute of Standards and Technology (NIST) to continue its groundbreaking work on characterizing nanomedicines and moving them toward the clinic. In

  13. 75 FR 62892 - Massachusetts Institute of Technology Research Reactor Environmental Assessment and Finding of No...

    Science.gov (United States)

    2010-10-13

    ... NUCLEAR REGULATORY COMMISSION [Docket No. 50-020; NRC-2010-0313] Massachusetts Institute of Technology Research Reactor Environmental Assessment and Finding of No Significant Impact Correction In notice document 2010-24809 beginning on page 61220 in the issue of Monday, October 4, 2010, make the...

  14. 25 October 2017 - Meeting on a South-East European International Institute for Sustainable Technologies

    CERN Multimedia

    Ordan, Julien Marius

    2017-01-01

    Meeting on a South-East European International Institute for Sustainable Technologies at CERN, organised by the Ministry of Science of Montenegro, followed by a lunch hosted by CERN Director-General F. Gianotti and a site visit to CMS counting room and S'Cool LAB.

  15. 2015 Global Information Technology Report: Consequences on Knowledge Management in Higher Education Institutions in Nigeria

    Science.gov (United States)

    Ololube, Nwachukwu Prince; Agbor, Comfort Nkogho; Major, Nanighe Baldwin; Agabi, Chinyere O.; Wali, Worlu I.

    2016-01-01

    This research is a continuation of a theoretical review that evaluated ICT Policy Outcomes for National Development in relation to Networked Readiness Index (NRI) and the impact it has on knowledge integration and management in higher education institutions in Nigeria. A new dawn in information technology (IT) has initiated new trends in…

  16. Integrating Social Sustainability in Engineering Education at the KTH Royal Institute of Technology

    Science.gov (United States)

    Björnberg, Karin Edvardsson; Skogh, Inga-Britt; Strömberg, Emma

    2015-01-01

    Purpose: The purpose of this paper is to investigate what are perceived to be the main challenges associated with the integration of social sustainability into engineering education at the KTH Royal Institute of Technology, Stockholm. Design/methodology/approach: Semi-structured interviews were conducted with programme leaders and teachers from…

  17. What governs the transition to a hydrogen economy? Articulating the relationship between technologies and political institutions

    NARCIS (Netherlands)

    Hisschemoller, M.; Bode, M.G.A.; van de Kerkhof, M.F.

    2006-01-01

    There is a lack of integrated knowledge on the transition to a sustainable energy system. The paper focuses on the relationship between technologies and institutions in the field of hydrogen from the perspective of political theory. The paper unfolds four paradigms of governance: 'Governance by

  18. Present situation of unused uranium fuel in Tokyo Institute of Technology

    International Nuclear Information System (INIS)

    Obara, T.; Ogawa, M.

    2008-01-01

    Present situation of unused enriched uranium fuel in Tokyo Institute of Technology is described. The fuels were for sub-critical experiments. There is no special facility for transportation in the site. But there is no technical problem for it. One of the important issues to be done is a duty by national regulation against nuclear disaster. (author)

  19. The Feasibility of a Continuous Learning Year Program at Fashion Institute of Technology.

    Science.gov (United States)

    Thomas, George Isaiah

    This feasibility study provides the Fashion Institute of Technology with a number of continuous-learning-year calendar choices, along with several suggestions regarding implementation procedures. The nature of the implementation process and the issues confronting the college administrator who is willing to reschedule the college year to facilitate…

  20. The Use of Interactive Learning Technology in Institutions of Higher Learning

    Science.gov (United States)

    Abykanova, Bakytgul; Nugumanova, Samal; Yelezhanova, Shynar; Kabylkhamit, Zhanargul; Sabirova, Zhanylsyn

    2016-01-01

    This paper is linked to a study aiming to provide a theoretical rationale for the methodological foundations of the use of interactive learning technology in institutions of higher learning and undertakes to describe the process of practical implementation of this approach and analyze the outcomes. The authors examine the views expressed by…

  1. From Server to Desktop: Capital and Institutional Planning for Client/Server Technology.

    Science.gov (United States)

    Mullig, Richard M.; Frey, Keith W.

    1994-01-01

    Beginning with a request for an enhanced system for decision/strategic planning support, the University of Chicago's biological sciences division has developed a range of administrative client/server tools, instituted a capital replacement plan for desktop technology, and created a planning and staffing approach enabling rapid introduction of new…

  2. Aeronautical education and research at the Swiss Institute of Technology in Zurich

    Science.gov (United States)

    Karner, L; Ackeret, J

    1931-01-01

    Progress in the scientific and practical fields of aviation has caused the Swiss Institute of Technology to organize lectures and practical training courses in all three branches of aeronautics and to found centers of scientific research, laboratories, etc., in order to supply the government and industries with scientifically and technically trained engineers.

  3. Activities of the All-Union Institute for Heat Technology in suppression of nitrogen oxide emission by technological methods

    Energy Technology Data Exchange (ETDEWEB)

    Enyakin, Yu.P.; Kotler, V.R.; Babii, V.I.; Shtal' man, S.G.; Shcherbachenko, S.I. (Vsesoyuznyi Teplotekhnicheskii Institut (USSR))

    1991-06-01

    Evaluates research programs of the All-Union Institute for Heat Technology in the USSR from 1970 to 1991. Research and development programs, developed technologies or equipment types, their tests and use on a commercial scale are discussed. Power plants in the USSR which use the technologies are listed. The following technologies are comparatively evaluated: recirculation of flue gases to a combustion system (reduces emission of nitrogen oxides by about 2 times), two-stage coal combustion (reduces emission by 40-50%), three-stage combustion (reduces emission by 40-50%), use of special types of burners (reduces emission by 25-30%), adapting temperature of air supplied to the combustion zone (reduces emission by 20-30%). 10 refs.

  4. Application status and prospect of X-ray lithography technology

    International Nuclear Information System (INIS)

    Xie Changqing; Chen Dapeng; Liu Ming; Ye Tianchun; Yi Futing

    2004-01-01

    Because of its many merits, such as high resolution, large depth of focus, large field size, high throughput, large process latitude, easy extendibility to 50 nm and below ground rule, and so on, the Proximity X-ray Lithography (PXL) is very attractive for the 100 nm and smaller ground rule integrated circuit manufacturing. In this paper, the international research and development status of PXL is briefly introduced firstly, and both its application status and prospect in nanoelectronics research, Monolithic Microwave Integrated Circuits (MMIC) production and silicon-based Ultra Large Scale Integrated Circuits (ULSIC) production are described, and the recent research progress in home PXL is also presented briefly. (authors)

  5. Ceramic technologies for automotive industry: Current status and perspectives

    International Nuclear Information System (INIS)

    Okada, Akira

    2009-01-01

    The automotive industry has developed substantially through advances in mechanical technologies, and technologies such as electronics and advanced materials have also contributed to further advances in automobiles. The contribution of ceramic materials to automobile technologies ranges over driving performance, exhaust gas purification, and fuel efficiency improvements. Several ceramic components, such as knock sensors, oxygen sensors, exhaust gas catalysts, and silicon nitride parts for automotive engines, have been successfully applied to automobiles. This paper focuses on the contribution of ceramics to automotive technologies. It also mentions potential contributions in the future, including adiabatic turbo-compound diesels, ceramic gas turbines, fuel cells, and electric vehicles because ceramic technologies have been intensively involved in the challenge to achieve advanced power sources.

  6. Nuclear engineering experiments at experimental facilities of JNC in graduate course of Tokyo Institute of Technology

    International Nuclear Information System (INIS)

    Hayashizaki, Noriyosu; Takahashi, Minoru; Aoyama, Takafumi; Onose, Shoji

    2005-01-01

    Nuclear engineering experiments using outside facilities of the campus have been offered for graduate students in the nuclear engineering course in Tokyo Institute of Technology (Tokyo Tech.). The experiments are managed with the collaboration of Japan Nuclear Cycle Development Institute (JNC), Japan Atomic Energy Research Institute (JAERI) and Research Reactor Institute, Kyoto University (KUR). This report presents the new curriculum of the nuclear engineering experiments at JNC since 2002. The change is due to the shutdown of Deuterium Criticality Assembly Facility (DCA) that was used as an experimental facility until 2001. Reactor physics experiment using the training simulator of the experimental fast reactor JOYO is continued from the previous curriculum with the addition of the criticality approach experiment and control rods calibration. A new experimental subject is an irradiated material experiment at the Material Monitoring Facility (MMF). As a result, both are acceptable as the student experiments on the fast reactor. (author)

  7. Features of state industrial policy under imperfect technological and institutional environment

    Directory of Open Access Journals (Sweden)

    Denisov Igor Vladimirovich

    2011-07-01

    Full Text Available For all countries with imperfect technology and the institutional environment (low culture and organization of production, high levels of corruption, the small middle class, not necessarily the execution of laws, etc., even such strong measures to support the economy like a direct financing of firms and territories, protectionism, stimulation of demand, etc. does not give significant effect. For Russia, which objectively have to be attributed to such countries, extremely relevant management system development, capable of overcoming difficulties, starting with the knees and the resistance of the imperfect (bad technological and institutional environment. Several theoretical solutions recently obtained through the development of the theory of economic-technological development of civilization, can create the mechanism and conditions of such a system.

  8. Progress and status of fusion technology and materials research in China

    International Nuclear Information System (INIS)

    Xu Zengyu; Liu Xiang; Chen Jiming; Zhang Fu

    2003-01-01

    Fusion technology and materials research in China was included in the National High Technology Project during 1986-2000. Since 2000, the National Natural Science Foundation Committee, the State Development Planning Commission, and the Ministry of Science and Technology have supported this field of research. The research program has covered the topics of tritium engineering, plasma facing materials and structural materials. The Southwestern Institute of Physics has been a leading institute in this research program in the last 15 years in China, and over ten universities and institutes have joined the program. (author)

  9. Status of the JET project and its supporting technological programme

    International Nuclear Information System (INIS)

    Bertolini, E.

    1976-01-01

    A brief review of the overall design of the JET facility is given. Particular JET components described include the vacuum system, toroidal field coils, poloidal system, power supplies, control and data acquisition, and status of the project towards the construction phase

  10. [Current status of bacteriological studies at prefectural and municipal public health institutes in Japan].

    Science.gov (United States)

    Shinomiya, Hiroto; Seto, Kazuko; Kawase, Jun; Arikawa, Kentaro; Funatogawa, Keiji; Suzuki, Masahiro; Kubota, Hiroaki; Shirabe, Komei

    2015-01-01

    Prefectural and municipal public health institutes are located in prefectures and ordinance-designated cities in Japan, and play a vital role in the regional surveillance of infectious diseases and foodborne illnesses. These institutes, in close cooperation with national institutes such as the National Institute of Infectious Diseases and the National Institute of Health Sciences, construct the national surveillance network for infectious diseases and their causative agents. Bacteriological examinations and studies on a variety of infectious diseases and foodborne illnesses are core activities of prefectural and municipal public health institutes, through which novel and important bacteriological findings have been acquired. In this article, we report the latest findings regarding bacteriological examinations/studies and interesting cases at these institutes, especially concerning foodborne illnesses, tuberculosis, and antimicrobial resistances.

  11. Motivational Factors of Companies that Establish Cooperation with Institutes of Science and Technology

    Directory of Open Access Journals (Sweden)

    Bruno Giovanni Mazzola

    2016-04-01

    Full Text Available Technological innovation is deemed strategic for organizations and nations to achieve and sustain competitive advantage. One of the most effective means for companies to achieve these innovations is through the relationship with universities. Thus, this study aimed to identify the main factors that motivate companies to establish this partnership. Hence, a descriptive study was elaborated, in which respondents are companies that have some level of cooperation with universities and institutes of science and technology. The results obtained show that the main reasons are, according to their importance: (1 to strengthen the technology, (2 to search for new sources of creativity, (3 to obtain expertise in market-oriented technologies, (4 to acquire new technologies; (5 to reach skilled labor, (6 to train their human resources, and (7 to develop new products. Furthermore, this study found that the less important factors are related to social reasons; this finding deserves further investigation in future studies.

  12. Petroleum Science and Technology Institute with the TeXas Earth and Space Science (TXESS) Revolution

    Science.gov (United States)

    Olson, H. C.; Olson, J. E.; Bryant, S. L.; Lake, L. W.; Bommer, P.; Torres-Verdin, C.; Jablonowski, C.; Willis, M.

    2009-12-01

    The TeXas Earth and Space Science (TXESS) Revolution, a professional development program for 8th- thru 12th-grade Earth Science teachers, presented a one-week Petroleum Science and Technology Institute at The University of Texas at Austin campus. The summer program was a joint effort between the Jackson School of Geosciences and the Department of Petroleum and Geosystems Engineering. The goal of the institute was to focus on the STEM components involved in the petroleum industry and to introduce teachers to the larger energy resources theme. The institute kicked off with a welcoming event and tour of a green, energy-efficient home (LEED Platinum certified) owned by one of the petroleum engineering faculty. Tours of the home included an introduction to rainwater harvesting, solar energy, sustainable building materials and other topics on energy efficiency. Classroom topics included drilling technology (including a simulator lab and an overview of the history of the technology), energy use and petroleum geology, well-logging technology and interpretation, reservoir engineering and volumetrics (including numerous labs combining chemistry and physics), risk assessment and economics, carbon capture and storage (CO2 sequestration technology) and hydraulic fracturing. A mid-week field trip included visiting the Ocean Star offshore platform in Galveston, the Weiss Energy Hall at the Houston Museum of Science and Schlumberger (to view 3-D visualization technology) in Houston. Teachers remarked that they really appreciated the focused nature of the institute and especially found the increased use of mathematics both a tool for professional growth, as well as a challenge for them to use more math in their science classes. STEM integration was an important feature of the summer institute, and teachers found the integration of science (earth sciences, geophysics), technology, engineering (petroleum, chemical and reservoir) and mathematics particularly valuable. Pre

  13. Technological implications of fusion power: requirements and status

    International Nuclear Information System (INIS)

    Steiner, D.

    1978-01-01

    The major technological requirements for fusion power, as implied by current conceptual designs of fusion power plants, are identified and assessed relative to the goals of existing technology programs. The focus of the discussion is on the tokamak magnetic confinement concept; however, key technological requirements of mirror magnetic confinement systems and of inertial confinement concepts will also be addressed. The required technology is examined on the basis of three general areas of concern: (a) the power balance, that is, the unique power handling requirements associated with the production of electrical power by fusion; (b) reactor design, focusing primarily on the requirements imposed by a tritium-based fuel cycle, thermal hydraulic considerations, and magnet systems; and (c) materials considerations, including radiation damage effects, neutron-induced activation, and resource limitations

  14. Indian fast reactor technology: Current status and future programme

    Indian Academy of Sciences (India)

    IGCAR is responsible for the design, R & D, manufacturing technology and regulatory clear- ances. ... material production that can be used to fuel another reactor. ..... The nuclear steam supply system components are being manufactured suc-.

  15. The Status of Basic Technology in Cross River State Junior ...

    African Journals Online (AJOL)

    info

    practical class. It was further ... saying technology refer to all tools and procedures used or required for manufacturing .... Self-reliance is very necessary for today's world especially in Cross River, when children .... safety in the workshops. 2.40.

  16. Extravehicular Activity (EVA) Technology Development Status and Forecast

    Science.gov (United States)

    Chullen, Cinda; Westheimer, David T.

    2010-01-01

    Beginning in Fiscal Year (FY) 2011, Extravehicular activity (EVA) technology development became a technology foundational domain under a new program Enabling Technology Development and Demonstration. The goal of the EVA technology effort is to further develop technologies that will be used to demonstrate a robust EVA system that has application for a variety of future missions including microgravity and surface EVA. Overall the objectives will be reduce system mass, reduce consumables and maintenance, increase EVA hardware robustness and life, increase crew member efficiency and autonomy, and enable rapid vehicle egress and ingress. Over the past several years, NASA realized a tremendous increase in EVA system development as part of the Exploration Technology Development Program and the Constellation Program. The evident demand for efficient and reliable EVA technologies, particularly regenerable technologies was apparent under these former programs and will continue to be needed as future mission opportunities arise. The technological need for EVA in space has been realized over the last several decades by the Gemini, Apollo, Skylab, Space Shuttle, and the International Space Station (ISS) programs. EVAs were critical to the success of these programs. Now with the ISS extension to 2028 in conjunction with a current forecasted need of at least eight EVAs per year, the EVA technology life and limited availability of the EMUs will become a critical issue eventually. The current Extravehicular Mobility Unit (EMU) has vastly served EVA demands by performing critical operations to assemble the ISS and provide repairs of satellites such as the Hubble Space Telescope. However, as the life of ISS and the vision for future mission opportunities are realized, a new EVA systems capability could be an option for the future mission applications building off of the technology development over the last several years. Besides ISS, potential mission applications include EVAs for

  17. Current status and future potential for advanced volume reduction technologies

    International Nuclear Information System (INIS)

    Rutland, L.; Naughton, M.D.; Papaiya, N.C.

    1984-01-01

    With escalating costs for disposal of low-level radioactive waste (LLW) from nuclear power plants, and the possibility of unavailability of disposal space, some nuclear power utilities responded by commiting to implementing advanced volume reduction (VR) systems. This paper presents recent experience to implement advanced volume reduction technologies; their performance and typical operating and capital costs. This experience in the light of current economic conditions may enable us to predict the direction that future advanced VR technology commitments is taking

  18. Critical Success in E-learning: An Examination of Technological and Institutional Support Factors

    Directory of Open Access Journals (Sweden)

    Maslin Masrom

    2008-12-01

    Full Text Available In recent years, information technology (IT becomes prominent to support teaching and learning activities. IT tools allow us to create, collect, store and use the information and knowledge. E-learning was one of IT tools introduced at College of Science and Technology (CST, University Technology Malaysia (UTM Kuala Lumpur since 2001. It has enabled a paradigm shift from institutio n-centered instruction to anywhere, anytime and anybody learning models. In CST the e-learning technology was used for accessing the syllabus and course content, submitting assignments, and taking class quizzes. This paper focuses on issues relating to the e-learning critical success factors (CSFs from university students’ perspective. In this study, two main factors related to the e-learning CSFs within a university environment included technological and institutional support factors were examined. Confirmatory factor modeling approach was used to assess the criticality of the measures included in each factor. The results indicated that the most critical measures for technological factor in terms of ease of access and infrastructure are the browser efficiency, course website ease of use and computer network reliability. Meanwhile, for institutional support factor, the most critical measure is the availability of technical support or help desk.

  19. Recent tasks and status of National Research Institute for Radiobiology and Radiohygiene as TSO

    International Nuclear Information System (INIS)

    Pellet, S.

    2007-01-01

    The technical support function of the National Research Institute for Radiobiology and Radiohygiene has been introduced at the time of its establishment. In order to support the actual requirements the Institute carries on extended research in the fields of radiation protection and radiation biology participating in national and international projects. Supporting the proper performance of national radiation protection and safety tasks the Institute gives professional directives and expert opinions for decision processes of authorities. The Institutes main areas of radiation protection activity are: - Radiation-related licensing, inspection, record keeping; - assuring safety of radiation sources; - National Personal Dosimetry Service; - radiological monitoring of the environment; - preparedness for radiological incidents and accidents; - radiation protection training activities. The Institute has an accredited Testing Laboratory with nearly sixty examination protocols. Together with its Central Environmental Testing Laboratory, the Institute thus provides a significant support for both theoretical and practical accomplishment of the national radiation protection and safety tasks. (author)

  20. System for the dissemination of innovative technological solutions at an R&D institute

    Directory of Open Access Journals (Sweden)

    Marzena Walasik

    2013-06-01

    Full Text Available The changes in the global market and the emphasis on the commercialization of R&D results, boost competitiveness and decide on the necessity to implement a marketing approach towards the organization and management of the business activity, including that of research institutions, which being treated as a unique kind of enterprises, make the results of their research commercially available. An important factor supporting effective commercialisation of research results is a proper preparation and execution of promotion activities, which based on the rules of marketing, increase the likelihood of success of implementation of innovative solutions on the market. The dissemination activities comprise all activities aimed at raising the interest of the public (i. e. users, enterprises, institutions in the results of R&D works, and focused on presenting the possibilities and benefits of their practical application. In order for the innovations to be diffused, target markets need to be specified, media most relevant for a given sector of the market need to be selected together with the most effective ways of reaching out to the target groups identified in the market segmentation process, and an effective marketing campaign needs to be launched. The system for the dissemination of innovative solutions developed and implemented at the Institute for Sustainable Technologies – National Research Institute in Radom (Poland (ITeE – PIB, supports the management of R&D results and stimulates networking between the Institute and entities involved in the practical implementation of innovations. It also enables the execution of system tasks concerning promotion of innovative product and process technologies developed at the ITeE – PIB. As a result of its application, business projects, which improve the technology commercialization process resulting in new products or technologies being brought to the market, are proposed.

  1. Implementation of the e-learning method for technological research institutes utilization

    International Nuclear Information System (INIS)

    Pinheiro, Valderes Fernandes; Silva, Aucyone Augusto da; Rogero, Jose Roberto

    2002-01-01

    The e-learning is a subject that is attracting all teaching institution at the present because the number of interested student is growing in the same proportion of communication technology facilities is getting more easy and low cost to be used. Most of universities and colleges are adapting their classes to on-line and a new market is growing very fast all around the world. Of course that these institutions are also worried about the quality of the online teaching materials and also methodologies used to delivery them. This paper will explore some models that are being used in online classes and also will present the contribution of this research in developing a new teaching model that will applied in the technological research institutions like IPEN/CNEN-SP. This model should be technical and economical self-sufficient and it is emphasized in the customers technological needs. The model's variables are interactivity levels with the technology, use of internet tools (chat, forum, discussion list), teacher and student relationship, knowledge evaluation, etc. (author)

  2. Management information system of research institute supported by ministry of science and technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1992-12-15

    This book mentions development strategy of MIS. This book contains development strategy of MIS research institute supported by government, computerization of administrative work of research institute, library computer system, methodology on system development, LAN build of ministry science and technology, ocean data base energy data base, computerization of research data management case of construction and analysis for chemical DB, information system of life science, electronic data interchange, queueing theory, biotechnology and computer, comprehensive weather information system, special equipment of data and data processing of oil-hunt operation.

  3. Management information system of research institute supported by ministry of science and technology

    International Nuclear Information System (INIS)

    1992-12-01

    This book mentions development strategy of MIS. This book contains development strategy of MIS research institute supported by government, computerization of administrative work of research institute, library computer system, methodology on system development, LAN build of ministry science and technology, ocean data base energy data base, computerization of research data management case of construction and analysis for chemical DB, information system of life science, electronic data interchange, queueing theory, biotechnology and computer, comprehensive weather information system, special equipment of data and data processing of oil-hunt operation.

  4. Institutions and Technological Learning: Public-Private Linkages in Agricultural Research in Brazil and Argentina

    Directory of Open Access Journals (Sweden)

    Marcos Paulo Fuck

    2009-07-01

    Full Text Available The article discusses the institutional arrangements and forms of organization of agricultural research in Brazil and Argentina. The analysis focuses on Embrapa in the Brazilian case and INTA in the Argentinian case. Emphasis is laid on the two institutions’ policies regarding intellectual property and technology transfer. The aim is to contribute to the debate about how to conceptualize the co-evolution of organizations considering the technical, scientific, legal, regulatory, economic and other contexts in which they operate, reinforcing the idea of learning and that economic institutions do not just evolve but co-evolve.

  5. Current Status of Helium-3 Alternative Technologies for Nuclear Safeguards

    International Nuclear Information System (INIS)

    Henzlova, Daniela; Kouzes, R.; McElroy, R.; Peerani, P.; Baird, K.; Bakel, A.; Borella, M.; Bourne, M.; Bourva, L.; Cave, F.; Chandra, R.; Chernikova, D.; Croft, S.; Dermody, G.; Dougan, A.; Ely, J.; Fanchini, E.; Finocchiaro, P.; Gavron, Victor; Kureta, M.; Ianakiev, Kiril Dimitrov; Ishiyama, K.; Lee, T.; Martin, Ch.; McKinny, K.; Menlove, Howard Olsen; Orton, Ch.; Pappalardo, A.; Pedersen, B.; Plenteda, R.; Pozzi, S.; Schear, M.; Seya, M.; Siciliano, E.; Stave, S.; Sun, L.; Swinhoe, Martyn Thomas; Tagziria, H.; Takamine, J.; Weber, A.-L.; Yamaguchi, T.; Zhu, H.

    2015-01-01

    International safeguards inspectorates (e.g., International Atomic Energy Agency, or Euratom) rely heavily on neutron assay techniques, and in particular, on coincidence counters for the verification of declared nuclear materials under safeguards and for monitoring purposes. While 3 He was readily available, the reliability, safety, ease of use, gamma-ray insensitivity, and high intrinsic thermal neutron detection efficiency of 3 He-based detectors obviated the need for alternative detector technologies. However, the recent decline of the 3 He gas supply has triggered international efforts to develop and field neutron detectors that make use of alternative materials. In response to this global effort, the U.S. Department of Energy's (DOE) National Nuclear Security Administration (NNSA) and Euratom launched a joint effort aimed at bringing together international experts, technology users and developers in the field of nuclear safeguards to discuss and evaluate the proposed 3 He alternative materials and technologies. The effort involved a series of two workshops focused on detailed overviews and viability assessments of various 3 He alternative technologies for use in nuclear safeguards applications. The key objective was to provide a platform for collaborative discussions and technical presentations organized in a compact, workshop-like format to stimulate interactions among the participants. The meetings culminated in a benchmark exercise providing a unique opportunity for the first inter-comparison of several available alternative technologies. This report provides an overview of the alternative technology efforts presented during the two workshops along with a summary of the benchmarking activities and results. The workshop recommendations and key consensus observations are discussed in the report, and used to outline a proposed path forward and future needs foreseeable in the area of 3 He-alternative technologies.

  6. Current Status of Helium-3 Alternative Technologies for Nuclear Safeguards

    Energy Technology Data Exchange (ETDEWEB)

    Henzlova, Daniela [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Kouzes, R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); McElroy, R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Peerani, P. [European Commission, Ispra (Italy). Joint Research Centre; Aspinall, M. [Hybrid Instruments Ltd., Birmingham (United Kingdom); Baird, K. [Intl Atomic Energy Agency (IAEA), Vienna (Austria); Bakel, A. [National Nuclear Security Administration (NNSA), Washington, DC (United States); Borella, M. [SCK.CEN, Mol (Belgium); Bourne, M. [Univ. of Michigan, Ann Arbor, MI (United States); Bourva, L. [Canberra Ltd., Oxford (United Kingdom); Cave, F. [Hybrid Instruments Ltd., Birmingham (United Kingdom); Chandra, R. [Arktis Radiation Detectors Ltd., Zurich (Sweden); Chernikova, D. [Chalmers Univ. of Technology (Sweden); Croft, S. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Dermody, G. [Symetrica Inc., Maynard, MA (United States); Dougan, A. [National Nuclear Security Administration (NNSA), Washington, DC (United States); Ely, J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Fanchini, E. [Istituto Nazionale di Fisica Nucleare (INFN), Milano (Italy); Finocchiaro, P. [Istituto Nazionale di Fisica Nucleare (INFN), Milano (Italy); Gavron, Victor [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Kureta, M. [Japan Atomic Energy Agency (JAEA), Tokai (Japan); Ianakiev, Kiril Dimitrov [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Ishiyama, K. [Japan Atomic Energy Agency (JAEA), Tokai (Japan); Lee, T. [Intl Atomic Energy Agency (IAEA), Vienna (Austria); Martin, Ch. [Symetrica Inc., Maynard, MA (United States); McKinny, K. [GE Reuter-Stokes, Twinsburg, OH (United States); Menlove, Howard Olsen [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Orton, Ch. [National Nuclear Security Administration (NNSA), Washington, DC (United States); Pappalardo, A. [Istituto Nazionale di Fisica Nucleare (INFN), Milano (Italy); Pedersen, B. [European Commission, Ispra (Italy). Joint Research Centre; Peranteau, D. [National Nuclear Security Administration (NNSA), Washington, DC (United States); Plenteda, R. [Intl Atomic Energy Agency (IAEA), Vienna (Austria); Pozzi, S. [Univ. of Michigan, Ann Arbor, MI (United States); Schear, M. [Symetrica Inc., Maynard, MA (United States); Seya, M. [Japan Atomic Energy Agency (JAEA), Tokai (Japan); Siciliano, E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Stave, S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sun, L. [Proportional Technologies Inc., Houston, TX (United States); Swinhoe, Martyn Thomas [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Tagziria, H. [European Commission, Ispra (Italy). Joint Research Centre; Vaccaro, S. [DG Energy (Luxembourg); Takamine, J. [Japan Atomic Energy Agency (JAEA), Tokai (Japan); Weber, A. -L. [Inst. for Radiological Protection and Nuclear Safety (IRSN), Fontenay-aux-Roses (France); Yamaguchi, T. [Japan Atomic Energy Agency (JAEA), Tokai (Japan); Zhu, H. [National Nuclear Security Administration (NNSA), Washington, DC (United States)

    2015-12-01

    International safeguards inspectorates (e.g., International Atomic Energy Agency {IAEA}, or Euratom) rely heavily on neutron assay techniques, and in particular, on coincidence counters for the verification of declared nuclear materials under safeguards and for monitoring purposes. While 3He was readily available, the reliability, safety, ease of use, gamma-ray insensitivity, and high intrinsic thermal neutron detection efficiency of 3He-based detectors obviated the need for alternative detector technologies. However, the recent decline of the 3He gas supply has triggered international efforts to develop and field neutron detectors that make use of alternative materials. In response to this global effort, the U.S. Department of Energy’s (DOE) National Nuclear Security Administration (NNSA) and Euratom launched a joint effort aimed at bringing together international experts, technology users and developers in the field of nuclear safeguards to discuss and evaluate the proposed 3He alternative materials and technologies. The effort involved a series of two workshops focused on detailed overviews and viability assessments of various 3He alternative technologies for use in nuclear safeguards applications. The key objective was to provide a platform for collaborative discussions and technical presentations organized in a compact, workshop-like format to stimulate interactions among the participants. The meetings culminated in a benchmark exercise providing a unique opportunity for the first inter-comparison of several available alternative technologies. This report provides an overview of the alternative technology efforts presented during the two workshops along with a summary of the benchmarking activities and results. The workshop recommendations and key consensus observations are discussed in the report, and used to outline a proposed path forward and future needs foreseeable in the area of 3

  7. Current status on research and development of accelerator-driven system and nuclear transmutation technology in Asian countries

    International Nuclear Information System (INIS)

    Pyeon, Cheol Ho

    2013-01-01

    This status report describes the current status on research and development (R and D) of accelerator-driven system (ADS) and nuclear transmutation techniques (NTT), including nuclear data, accelerator techniques, Pb-Bi target, fuel technologies and reactor physics, in East Asian countries: Japan, Korea and China. The report also includes all presentation materials presented in 'the 10th International Workshop on Asian Network for ADS and NTT (ADS+NTT 2012)' held at the Kyoto University Research Reactor Institute, Osaka, Japan on 6th and 7th December, 2012. The objective of this workshop is to make actual progress of ADS R and D especially in East Asian countries, as well as in European countries, through sharing mutual interests and conducting the information exchange each other. The 5 of 27 papers presented at the entitled report and meeting are indexed individually. (J.P.N.)

  8. ITER and the fusion reactor: status and challenge to technology

    International Nuclear Information System (INIS)

    Lackner, K.

    2001-01-01

    Fusion has a high potential, but requires an integrated physics and technology effort without precedence in non-military R and D, the basic physics feasibility demonstration will be concluded with ITER, although R and D for efficiency improvement will continue. The essential technological issues remaining at the start of ITER operation concern materials questions: first wall components and radiation tolerant (low activation materials). This paper comprised just the copy of the slides presentation with the following subjects: magnetic confinement fusion, the Tokamak, progress in Tokamak performance, ITER: its geneology, physics basis-critical issues, cutaway of ITER-FEAT, R and D - divertor cassette (L-5), differences power plant-ITER, challenges for ITER and fusion plants, main technological problems (plasma facing materials), structural and functional materials for fusion power plants, ferritic steels, EUROFER development, improvements beyond ferritic steels, costing among others. (nevyjel)

  9. Current status of technology development on remote monitoring system

    International Nuclear Information System (INIS)

    Yoon, Wan Ki; Lee, Y. K.; Lee, Y. D.; Na, W. W.

    1997-03-01

    IAEA is planning to perform the remote monitoring system in nuclear facility in order to reinforce the economical and efficient inspection. National lab. in U.S. is developing the corresponding core technology and field trial will be done to test the remote monitoring system by considering the case that it replace the current safeguards system. U.S. setup the International Remote Monitoring Project to develop the technology. IAEA makes up remote monitoring team and setup the detail facility to apply remote monitoring system. Therefore, early participation in remote monitoring technology development will make contribution in international remote monitoring system and increase the transparency and confidence in domestic nuclear activities. (author). 12 refs., 20 figs

  10. U.S. Status of Fast Reactor Research and Technology

    International Nuclear Information System (INIS)

    Hill, Robert

    2012-01-01

    Summary: • Fast reactor R&D is focused on key technologies innovations for performance improvement (cost reduction) and safety: 1. System Integration and Concept Development; 2. Safety Technology; 3. Advanced Materials; 4. Ultrasonic Viewing; 5. Advanced Energy Conversion (Supercritical CO 2 Brayton cycle); 6. Reactor Simulation; 7. Nuclear Data; 8. Advanced Fuels. • Fast reactors have flexible capability for actinide management: – A wide variety of fuel cycle options are being considered; • International R&D collaboration pursued in Generation-IV and multilateral arrangements

  11. Accelerator technology program. Status report, October 1984-March 1985

    International Nuclear Information System (INIS)

    Jameson, R.A.; Schriber, S.O.

    1986-04-01

    Activities of the racetrack-microtron development programs are highlighted, one of which is being done in collaboration with the National Bureau of Standards and the other with the University of Illinois; the BEAR (Beam Experiment Aboard Rocket) project; work in beam dynamics; the proposed LAMPF II accelerator; and the Proton Storage Ring. Discussed next is radio-frequency and microwave technology, followed by activities in accelerator theory and simulation, and free-electron laser technology. The report concludes with a listing of papers published during this reporting period

  12. Reflection of Information Technologies over the Information Professionals in Terms of Status: A Survey on the Librarians in Ankara

    Directory of Open Access Journals (Sweden)

    Semanur Öztemiz

    2013-11-01

    Full Text Available In order not to succumb to technologies that carry out tasks similar to those performed by humans, modern professional understanding makes it essential to adopt reconciliatory approaches. Because it requires less effort, the partnership between manpower and technology allows professional activities to be carried out in a shorter time and results in greater product or service output. In addition, this partnership deeply affects the workforce responsible for professional implementation. Developing technologies have brought about various changes in education and job titles and particularly in the professional specifications for information professionals. This study aims to set forth the reflections of change on the status extent, based on the information professionals ’ experiences. This study is based on descriptive methodology and covers 106 information professionals working in public libraries, university libraries and in the libraries of those institutions attached to the Prime Ministry in the Turkish capital city Ankara. This research finds that changes in information technologies have had meaningful impacts in terms of indicators of social status such as value, respectability, financial income and professional interest.

  13. The Status of Vocational Teacher Education in University Council for Vocational Education Member Institutions. Research Report.

    Science.gov (United States)

    Anderson, B. Harold

    The purpose of the study reported in this document was to describe the quantitative and qualitative characteristics of the vocational teacher education programs among institutions that are members of the University Council for Vocational Education. A questionnaire was mailed to representatives of each member institution in October 1985, with a 100…

  14. Commercial Supersonics Technology Project - Status of Airport Noise

    Science.gov (United States)

    Bridges, James

    2016-01-01

    The Commercial Supersonic Technology Project has been developing databases, computational tools, and system models to prepare for a level 1 milestone, the Low Noise Propulsion Tech Challenge, to be delivered Sept 2016. Steps taken to prepare for the final validation test are given, including system analysis, code validation, and risk reduction testing.

  15. The Melt-Dilute Treatment Technology Offgas Development Status Report

    International Nuclear Information System (INIS)

    Adams, T. M.

    1999-01-01

    The melt-dilute treatment technology is being developed to facilitate the ultimate disposition of highly enriched Al-Base DOE spent nuclear fuels in a geologic repository such as that proposed for Yucca Mountain. The melt-dilute process is a method of preparing DOE spent nuclear fuel for long term storage

  16. Fuels from microalgae: Technology status, potential, and research requirements

    Energy Technology Data Exchange (ETDEWEB)

    Neenan, B.; Feinberg, D.; Hill, A.; McIntosh, R.; Terry, K.

    1986-08-01

    Although numerous options for the production of fuels from microalgae have been proposed, our analysis indicates that only two qualify for extensive development - gasoline and ester fuel. In developing the comparisons that support this conclusion, we have identified the major areas of microalgae production and processing that require extensive development. Technology success requires developing and testing processes that fully utilize the polar and nonpolar lipids produced by microalgae. Process designs used in these analyses were derived from fragmented, preliminary laboratory data. These results must be substantiated and integrated processes proposed, tested, and refined to be able to evaluate the commercial feasibility from microalgae. The production of algal feedstocks for processing to gasoline or ester fuel requires algae of high productivity and high lipid content that efficiently utilize saline waters. Species screening and development suggest that algae can achieve required standards taken individually, but algae that can meet the integrated requirements still elude researchers. Effective development of fuels from microalgae technology requires that R and D be directed toward meeting the integrated standards set out in the analysis. As technology analysts, it is inappropriate for us to dictate how the R and D effort should proceed to meet these standards. We end our role by noting that alternative approaches to meeting the feasibility targets have been identified, and it is now the task of program managers and scientists to choose the appropriate approach to assure the greatest likelihood of realizing a commercially viable technology. 70 refs., 39 figs., 35 tabs.

  17. Status of technology of uranium recovery from seawater

    International Nuclear Information System (INIS)

    Sugo, Takanobu; Saito, Kyoichi.

    1990-01-01

    By bringing the solid material called adsorbent in contact with seawater, uranium can be collected, therefore, the adsorbent to which uranium was adsorbed in seawater can be regarded as the resource of uranium storing. To the adsorbent, also rare metals are concentrated in addition to uranium. From such viewpoint, the development of the technology for collecting seawater uranium is important for the Japanese energy policy. The uranium concentration in seawater is about 3 mg/m 3 and its form of dissolution is uranyl tricarbonate ions. The technology of collecting seawater uranium is the separation technology for extracting the component of very low concentration from the aqueous solution containing many components. The total amount of uranium in the whole oceans reaches about 4 billion t, which is about 1000 times as much as the uranium commercially mined on land. It is the target of the technology to make artificial uranium ore of as high quality as possible quickly. The process of collecting seawater uranium comprises adsorption, desorption, separation and enrichment. As the adsorbents, hydrated titanium oxide and chelate resin represented by amidoxime are promising. The adsorption system is described. (K.I.)

  18. Status and implementation of reproductive technologies in goats in ...

    African Journals Online (AJOL)

    Mené

    2015-02-19

    Feb 19, 2015 ... In modern cattle breeding, assisted reproductive technologies in small ruminants have been used even ..... comparison to sponges that cause stress in the animals ... well as the use of females in heat (Rodríguez-Martínez et.

  19. Texas Manufacturing Technology Center feasibility study for the Inland Regional Industrial Technology Institute

    International Nuclear Information System (INIS)

    1994-01-01

    This document presents the Texas Manufacturing Technology Center (TMTC) Business Plan to convert the Central Facility of the Superconducting Super Collider project to alternate uses. The plan is divided into six sections: (1) Executive Summary, (2) Market and Benefit Analysis, (3) Marketing Strategy, (4) Services, (5) Organization and Operations Overview, and (6) Financial Plan. Each area is supported by separate documents that address individual opportunities and challenges associated with transitioning the facility, and its asset base to new uses for benefit of the locality, state, region and nation

  20. Monitoring Technology for Vehicle Loading Status Based on the Analysis of Suspension Vibration Characters

    Directory of Open Access Journals (Sweden)

    Shiwu Li

    2014-01-01

    Full Text Available Monitoring and early warning of vehicle risk status was one of the key technologies of transportation security, and real-time monitoring load status could reduce the transportation accidents effectively. In order to obtain vehicle load status information, vehicle characters of suspension were analyzed and simulated under different working conditions. On the basis of this, the device that can detect suspension load with overload protection structure was designed and a method of monitored vehicle load status was proposed. The monitoring platform of vehicle load status was constructed and developed for a FAW truck and system was tested on level-A road and body twist lane. The results show that the measurement error is less than 5% and horizontal centre-of-mass of vehicle was positioned accurately. The platform enables providing technical support for the real-time monitoring and warning of vehicles risk status in transit.

  1. The material of the social: the mutual shaping of institutions by irrigation technology and society in Seguia Khrichfa, Morocco

    NARCIS (Netherlands)

    Kooij, van der S.; Zwarteveen, M.Z.; Kuper, M.

    2015-01-01

    In this paper we draw attention to the important role technology plays in co-mediating institutions, opening up some courses of action and closing off others. Irrigation studies generally recognize the importance of institutions in making technologies work, but tend to take the precise functioning

  2. The material of the social: the mutual shaping of institutions by irrigation technology and society in Sequia Krichfa, Morocco

    NARCIS (Netherlands)

    van der Kooij, S.; Zwarteveen, M.; Kuper, M.

    2015-01-01

    In this paper we draw attention to the important role technology plays in co-mediating institutions, opening up some courses of action and closing off others. Irrigation studies generally recognize the importance of institutions in making technologies work, but tend to take the precise functioning

  3. Factors Related to the Adoption of IT Emerging Technologies by Research and Non-Research Based Higher Education Institutions

    Science.gov (United States)

    Then, Keri Ann; Amaria, Pesi

    2013-01-01

    This study examined the adoption of information technology (IT) emerging technology by higher education institutions with a focus on non-research and research based institutions categorized by Carnegie Mellon classifications that are members of EDUCAUSE, a higher education non-profit organization, whose mission is the use of IT in higher…

  4. Establishment of a Quantitative Medical Technology Evaluation System and Indicators within Medical Institutions

    Directory of Open Access Journals (Sweden)

    Suo-Wei Wu

    2018-01-01

    Conclusions: As the two-round questionnaire survey of experts and statistical analysis were performed and credibility of the results was verified through consistency evaluation test, the study established a quantitative medical technology evaluation system model and assessment indicators within medical institutions based on the Delphi method and analytical hierarchy process. Moreover, further verifications, adjustments, and optimizations of the system and indicators will be performed in follow-up studies.

  5. Report on our activities to spread knowledge about radiation in Musashi Institute of Technology

    International Nuclear Information System (INIS)

    Okada, Yukiko

    2007-01-01

    In Musashi Institute of Technology, radiation knowledge spread activities are performed twice per year. One is 'the science experience classroom which children enjoy.' Another is 'the open school which studies atomic power'. The writer participated in the 'life and radiation' project as a WEN member, and has performed the radiation knowledge spread activities to a citizen. In this paper, these activities are introduced and the necessity and problem of radiation knowledge spread activities are considered. (author)

  6. Status and outlook of CFD technology at Mitsubishi Heavy Industries, Nagoya

    Science.gov (United States)

    Tanioka, Tadayuki

    1990-09-01

    Computational Fluid Dynamics (CFD) technology has made tremendous progress in the last several years. It has matured to become a practical simulation tool in aircraft industries. In MHI, CFD has become an indispensible tool for aerodynamic design aerospace vehicles. The present status is described of this advanced technology at MHI. Also mentioned are some future advances of the fast growing technology as well as associated hardware requirements.

  7. 2008 Program for Invitation of Foreign Research Institutes to Jeonbuk Province and Enhancement of Technology Transfer

    International Nuclear Information System (INIS)

    Kim, Jin Kyu; Shin, J. W.; Yang, S. T.; Kim, S. W.; Song, B. S.; Cho, S. W.; Han, C. S.; Lee, G. J.

    2009-08-01

    This project was carried out to establish long-term tactical partnership with foreign research institutions for technology exchanges and facilities, and to develop cooperation projects for the core technology. Technical bases for inviting foreign R and D centers to Jeonbuk province has been established through consulting discussion and signing arrangement on cooperation between ARTI and the partner institute. Discussion in-depth on an R and D center of Russian IBMP in Jeonbuk has been made and an agendum for the R and D center was submitted to the 13th Korea-Russian Federation Joint Committee on Nuclear Cooperation. Based on consensus that technology exchange and enhanced collaboration would be reciprocally beneficial, the second ARTI-TARRI joint seminar is scheduled at Jeongeup in September 2009, when further discussion will be made on the subsidiary arrangement to KAERI-JAEA MOU. An consultant meeting was done in order to strengthen international cooperation and to get advice on attracting foreign R and D centers at the Provincial Office in May 2009. A fact finding visit to iThemba LABS in south Africa was made to conclude a Letter of Understanding (LOU) for cooperation in R and D of radioisotopes and radiopharmaceuticals. The established collaborative relationship with world-leading research institutes such as IBMP, TARRI and iThemba LABS can make a role for inviting in the near future foreign R and D centers to Jeonbuk Province, and surely give a tactical influence on radiation industries in the Jeonbuk Province

  8. IMPORTANCE OF COMPUTER TECHNOLOGY IN REALIZATION OF CULTURAL AND EDUCATIONAL TASKS OF PRESCHOOL INSTITUTIONS

    Directory of Open Access Journals (Sweden)

    Zvezdan Arsić

    2016-06-01

    Full Text Available The rapid scientific and technological development imposes numerous changes in all spheres of life and work. In such circumstances, a computer has become a part of all aspects of life: economy, education, free time, family. Since children in contemporary society increasingly acquire knowledge before the school age, the question is how to prepare them for the world in which we live, bearing in mind how significantly different it is from the world in which the previous generations grew up. The research was aimed at examining the attitudes of preschool teachers about the importance of computers in the realization of educational activities in preschool institutions. The study included 54 teachers from Kosovo and Metohija: Kosovska Mitrovica, Donja Gušterica and Ropotovo. The research results indicate that digital technology is a very important and a useful didactic tool in the realization of educational activities in preschool institutions and that preschool teachers have the required competence to implement the technology. However, they are not satisfied with the quality of their ICT education and training during their studies; they also feel that their institutions do not provide adequate working conditions for the use of computers in the realization of educational tasks.

  9. Environmental and institutional considerations in the development and implementation of biomass energy technologies

    Energy Technology Data Exchange (ETDEWEB)

    Schwab, C.

    1979-09-01

    The photosynthetic energy stored in plant and organic waste materials in the United States amounts to approximately 40% of the nation's total energy consumption. Conversion of this energy to usable power sources is a complex process, involving many possible materials, conversion technologies, and energy products. Near-term biomass technologies are predominantly based on traditional fuel use and have the advantage over other solar technologies of fitting into existing tax and business practices. However, no other solar technology has the potential for such large environmental impacts. Unlike the conversion of sun, wind, and ocean thermal energy, the conversion of the biomass energy source, in the form of biomass residues and wastes, can create problems. Environmental impacts may be significant, and legal responses to these impacts are a key determinant to the widespread adoption of biomass technologies. This paper focuses on the major legal areas which will impact on biomass energy conversion. These include (1) the effect of existing state and federal legislation, (2) the role of regulatory agencies in the development of biomass energy, (3) governmental incentives to biomass development, and (4) legal issues surrounding the functioning of the technologies themselves. Emphasis is placed on the near-term technologies whose environmental impacts and institutional limitations are more readily identified. If biomass energy is to begin to achieve its apparently great potential, these questions must receive immediate attention.

  10. Renewable energy technologies in Australia: research, status and prospects

    International Nuclear Information System (INIS)

    Bruce, G.R.

    2006-01-01

    In support of environmental goals - principally reductions in greenhouse gas emissions from the energy sector - Australian Federal and State governments have put in place a range of measures to support the deployment of increasing levels of renewable energy products and services. These market-making mechanisms complement Australia's leadership in a wide range of technologies for stationary energy applications of renewable energy, including photovoltaics, electricity storage, concentrating solar power, small wind turbines, energy efficiency products, hot dry rock geothermal and wave power. Industry is responding to these market and technology opportunities, and associated policy measures to support their growth, with the aim of growing a sizeable renewable energy sector that delivers economically competitive solutions for Australian and export markets. (author)

  11. Clean Coal Technologies in China: Current Status and Future Perspectives

    Directory of Open Access Journals (Sweden)

    Shiyan Chang

    2016-12-01

    Full Text Available Coal is the dominant primary energy source in China and the major source of greenhouse gases and air pollutants. To facilitate the use of coal in an environmentally satisfactory and economically viable way, clean coal technologies (CCTs are necessary. This paper presents a review of recent research and development of four kinds of CCTs: coal power generation; coal conversion; pollution control; and carbon capture, utilization, and storage. It also outlines future perspectives on directions for technology research and development (R&D. This review shows that China has made remarkable progress in the R&D of CCTs, and that a number of CCTs have now entered into the commercialization stage.

  12. In-situ vitrification: a status of the technology

    International Nuclear Information System (INIS)

    FitzPatrick, V.F.

    1986-09-01

    The In Situ Vitrification (ISV) process is a new technology developed from its conceptual phase to selected field-scale applications in the last 5 years. The US Department of Energy (DOE) has sponsored the ISV program to develop alternative technology for potential application to contaminated soil sites. The ISV process converts contaminated soils and wastes into a durable glass and crystalline waste form in place by melting using joule heating. The ISV process has been developed through a series of 25 engineering-scale (laboratory) tests, 10 pilot-scale (small field) tests, and four large-scale (full-scale field) tests. Its major advantages for stabilizing radioactive and hazardous wastes are found to be: safety in terms of minimizing worker and public exposure; long-term durability of waste form (more than 1 million years); cost effectiveness ($150 to $300/m 3 ); applicability to a wide variety of soils and inclusions; and potential for eliminating exhumation, transport, and handling

  13. Status of the Visible Nulling Coronagraph Technology Demonstration Program

    Science.gov (United States)

    Clampin, M.; Lyon, R.

    2012-01-01

    We report on the development, sensing and control of the Vacuum Nuller Testbed to realize a Visible Nulling Coronagraphy (VNC) for exoplanet detection and characterization. The VNC is one of the few approaches that works with filled, segmented and sparse or diluted-aperture telescope systems. It thus spans a range of potential future NASA telescopes and could be flown as a separate instrument on such a future mission. NASA/Goddard Space Flight Center has an established effort to develop VNC technologies, and an incremental sequence of testbeds to advance this approach and its critical technologies. We will highlight results demonstrating the achievement of our TDEM contrast milestones, and highlight the performance of our wavefront sensing and control concept.

  14. Current status and application of fine screening technology in China

    Science.gov (United States)

    Chernova, E. V.; Chernov, D. V.

    2017-10-01

    The paper presents data on the design and technical parameters of high frequency vibrating screens, which are produced by Chinese manufacturer - company Landsky Tech Ltd. The technology of high frequency vibration is widely used at mining and metallurgical industries to separate fine and ultra-fine particles from the flow of dry material or pulp. The paper contains different types of screening systems, description, advantages and disadvantages of equipment and test results from mineral processing plants.

  15. The current status of coal liquefaction technologies - Panorama 2008

    International Nuclear Information System (INIS)

    2008-01-01

    In 2008, a first coal liquefaction unit to produce motor fuel (20,000 BPSD) will come on-stream in Shenhua, China (in the Ercos region of Inner Mongolia). Other, more ambitious projects have been announced in China for between now and 2020. Since oil production is expected to peak in the medium term, this technology may develop regionally in the next 20 years to cover ever-increasing demand for motor fuel

  16. Current status of stereoscopic 3D LCD TV technologies

    Science.gov (United States)

    Choi, Hee-Jin

    2011-06-01

    The year 2010 may be recorded as a first year of successful commercial 3D products. Among them, the 3D LCD TVs are expected to be the major one regarding the sales volume. In this paper, the principle of current stereoscopic 3D LCD TV techniques and the required flat panel display (FPD) technologies for the realization of them are reviewed. [Figure not available: see fulltext.

  17. Dish concentrators for solar thermal energy: Status and technology development

    Science.gov (United States)

    Jaffe, L. D.

    1982-01-01

    Point-focusing concentrators under consideration for solar thermal energy use are reviewed. These concentrators differ in such characteristics as optical configuration, optical materials, structure for support of the optical elements and of the receiver, mount, foundation, drive, controls and enclosure. Concentrator performance and cost are considered. Technology development is outlined, including wind loads and aerodynamics; precipitation, sand, and seismic considerations; and maintenance and cleaning.

  18. Status of high-temperature heat-pipe technology

    International Nuclear Information System (INIS)

    Ranken, W.A.

    1982-01-01

    This paper discusses the application of heat pipes to nuclear reactor space power systems. Characteristics of the device that favor such an application are described and recent results of current technology development programs are presented. Research areas that will need to be addressed in demonstrating that adequate lifetimes can be achieved with evaporation/condensation cycles operating at high temperatures in a reactor environment are also discussed

  19. Present status of some technological activities supporting the MOLCARE project

    Energy Technology Data Exchange (ETDEWEB)

    Torazza, A. [Ansaldo Ricerche S.r.l., Genova (Italy); Rocchini, G. [ENEL, Milano (Italy); Scagliotti, M. [CISE, Milano (Italy)

    1996-12-31

    The development of MCFC stack technology is carried out at Ansaldo Ricerche in the framework of the MOLCARE project, a cooperation with Spanish companies under a partial UE funding, while a specific research program concerning the physico-chemical characterization of materials is performed jointly by CISE and ENEL. The project includes the development, the construction and the testing of a full scale 100 kW prototype, the assessment of stack technology on subscale stacks, the mathematical modelling of the MCFC based plants and the basic researches. The aim of the basic researches, carried out on single cells, is to improve the effectiveness and durability of both the active and the hardware materials. The Ansaldo stack technology is based on external manifolding. The full scale 100 kW prototype will be integrated with the sensible heat reformer and other ancillary equipments according to the {open_quote}Compact Unit (CU){close_quotes} concept. These technical choices stress requirements for manifold gasket configuration. electrolyte migration control, {Delta}p management and porous component compaction.

  20. Status of development on simulation technology for pyrochemical reprocessing

    International Nuclear Information System (INIS)

    Arie, Kazuo; Mizuguchi, Koji; Fujita, Reiko

    2004-01-01

    Simulation techniques for the elemental behaviors in the pyrochemical reprocessing process of spent nuclear fuels are important for fuel reprocessing and future power station development. The authors developed a simulation code SPR1.0 which can analyze co-occurring electrochemical and chemical reactions simultaneously and which is applicable to know the behavior of any element in the system. The present report describes the status of the code development, the database for fundamental electrochemical reactions, and verification of the code. The code employs TRIAS code for electrochemical reactions and SOLGASMIX-PV for chemical reactions. Electrolytic process for MOX (mixed oxide) fuels with different Pu redox ratios were simulated using the present code and the effect of introducing iron ions was studied. The prospect of future development is also described. (S. Ohno)

  1. The status of fast reactor technology development in China

    International Nuclear Information System (INIS)

    Xu Mi

    1999-01-01

    The paper outlines the recent development status of nuclear power plants in China and introduces the main design characteristics and nuclear safety features of the Chinese Experimental Fast Reactor (CEFR). During the review of the Preliminary Safety Analysis Report some important subjects have been proposed by the China National Nuclear Safety Administration (NNSA). More detailed research for the answer has been done. The main analysis results for (1) Reactor Shut-down System, (2) Decay Heat Removal System and (3) Fuel Subassembly Blockage as three examples are given in this paper. The CEFR is still in the detail design stage. Its site is almost ready for the construction of the main building. It is planned to have the first pouring of concrete in June, 1999, but it depends on the license issued by the NNSA. (author)

  2. Materials technology for fusion - Current status and future requirements

    International Nuclear Information System (INIS)

    Gold, R.E.; Bloom, E.E.; Clinard, F.W. Jr.; Smith, D.L.; Stevenson, R.D.; Wolfer, W.G.

    1981-01-01

    The general status of the materials research and development activities currently under way in support of controlled thermonuclear fusion reactors in the United States is reviewed. In the area of magnetic confinement configurations, attention is given to development programs for first wall materials, which are at various stages for possible austenitic stainless steels, high-strength Fe-Ni-Cr alloys, reactive and refractory metal alloys, specially designed long-range ordered and rapidly solidified alloys, and ferritic/martensitic steels, and for tritium breeding materials, electrical insulators, ceramics, and coolants. The development of materials for inertial confinement reactors is also surveyed in relation to the protection scheme employed for the first wall and the effects of pulsed neutron irradiation. Finally, the materials requirements and selection procedures for the ETF/INTOR and Starfire tokamak reactor designs are examined. Needs for the expansion of research on nonfirst-wall materials and inertial confinement fusion reactor material requirements are pointed out

  3. The material of the social: the mutual shaping of institutions by irrigation technology and society in Seguia Khrichfa, Morocco

    Directory of Open Access Journals (Sweden)

    Saskia van der Kooij

    2015-03-01

    Full Text Available In this paper we draw attention to the important role technology plays in co-mediating institutions, opening up some courses of action and closing off others. Irrigation studies generally recognize the importance of institutions in making technologies work, but tend to take the precise functioning of institutions for granted. Studies that analyse institutions often do not pay enough attention to the mediating role of technology in allocating benefits, risks and burdens. We show in this paper that (irrigation institutions are moulded by and come about through the interactions between the technical and the social in dynamic and often contested processes of adaptation to changing environments. We argue that a critical understanding of what institutions do requires more explicit and detailed attention to technologies. We base this argument on a detailed historical analysis of the functioning of Seguia Khrichfa, a farmer managed irrigation scheme in Morocco. Through time, irrigation institutions in the Seguia Khrichfa have undergone transformations to match the changing demands of a heterogeneous and growing group of irrigators, an increased command area and changing cropping patterns, and the introduction of new technologies such as drip irrigation. These institutional transformations consisted of recursive cycles of modifications in technological infrastructure and the rules of allocation and distribution. Technical adaptations prompt alterations in the water rotation schedule and vice versa. We anchor our case in descriptions of a specific technology that played a crucial role in co-steering institutional change: the introduction of open/closed gates. Our analysis of the co-evolution of society and technology in shaping institutions in the Seguia Khrichfa shows how technologies become enrolled in (sometimes implicit processes of re-negotiating relations of authority and responsibility while obscuring institutional politics.

  4. Safety analysis of the present status of the research reactor 'RA' at 'Vinca' Institute

    International Nuclear Information System (INIS)

    Jovic, V.; Jovic, L.; Zivotic, Z.; Milovanovic, Dj.

    1995-01-01

    Safety analysis of the nuclear facility which has been out of work for a long time and whose future is not defined at the present moment, can not be connected to the usual, normatively regulated system analysis procedure in both operational and accidental regimes. Therefore, the safety analysis of the present status of the present status of the reactor RA is related to system and components analysis which, in present conditions maintain their nuclear functions operational. In the first place, it refers to components and equipment in which radioactive radiation generation still exists and to installations and equipment maintaining radiation level below permitted limit. in the context of the analysis the following areas are being covered: present status characteristics, accidental events while operating period from 1959. to 1984., nuclear fuels and radioactive waste inventory, basic characteristics and status of safety-related systems and equipment, radiation protection, potential accident analysis at present status of the reactor RA, potential accidental situations due to natural events (earthquakes, water flood) or man-induced events and security. 8 refs

  5. Current status of nuclear power generation in Japan and directions in water cooled reactor technology development

    International Nuclear Information System (INIS)

    Miwa, T.

    1991-01-01

    Electric power demand aspects and current status of nuclear power generation in Japan are outlined. Although the future plan for nuclear power generation has not been determined yet the Japanese nuclear research centers and institutes are investigating and developing some projects on the next generation of light water reactors and other types of reactors. The paper describes these main activities

  6. The present status and perspectives on the development of radiation chemistry and technology in Poland

    International Nuclear Information System (INIS)

    Kroh, J.; Rosiak, J.; Wolszczak, M.; Bobrowski, K.; Chmielewski, A. G.; Zimek, Z.; Forys, M.; Kalecinski, J.

    2001-01-01

    Having in mind the world research trends in the field of radiation chemistry and technology, the development of this domain in Poland has been discussed in this report. The condition of apparatus and man power at the Polish scientific institutions and academic centers acting in the above mentioned scientific and technological area has been analyzed. It has been shown that the basic research achievements of national institutions are placing them among the most advanced foreign centers. As to the implemented technological elaborations it may be said that is one of the few high-tech fields in which Poland can compete with the most advanced centers in the world. (author)

  7. The National Institute of Justice's Technology Efforts to Meet the Evolving Needs of the Responder Community

    Science.gov (United States)

    Boyd, D.

    2002-05-01

    The National Institute of Justice (NIJ) is the research arm of the Department of Justice. Through its Office of Science & Technology (OS&T), NIJ has actively pursued development of better tools for public safety agencies to combat terrorism since 1997, when, pursuant to the Anti-Terrorism and Effective Penalty Act of 1996 (P.L. 104 -132), it began development of technology to better enable law enforcement agencies to combat terrorism. NIJ quickly realized that effectively combating terrorism required a multi disciplinary, multi agency response. Additionally, it came to understand that, as noted by the Gilmore Commission, the best way to prepare the responder community to deal with the consequences of terrorist incidents, was to ``emphasize programs and initiatives that build appropriately on existing State and local capabilities for other emergencies and disasters.'' For example, an effective critical incident management system is just as important to the ability to deal with a terrorist attack, such as occurred at the World Trade Center, as with a major natural disaster or the crash of a commercial airliner or passenger train. Consequently, NIJ's efforts have evolved to focus on the responder community's common, unaddressed needs for better tools to deal with critical incidents. The Institutes efforts focus on five technology areas: infrastructure security, personnel location, explosives detection and remediation, communications and information technology and training, and development of standards.

  8. The status and prospects of nuclear reactor technology development

    International Nuclear Information System (INIS)

    Juhn, P.E.

    2001-01-01

    Nuclear power is a proven technology which currently contributes about 16% to the world electricity supply and, to a much lesser extent, to heat supply in some countries. Nuclear Power is economically competitive with fossil fuels for base load electricity generation in many countries, and is one of the commercially proven energy supply options that could be extended in the future to reduce environmental burdens, especially greenhouse gas emissions, from the electricity sector. Over the past five decades, nearly ten thousand reactor-years of operating experience have been accumulated with current nuclear power plants. However, nuclear power is currently at a cross-road. There are no new nuclear power construction projects in most parts of the world, except some countries in East Asia and Eastern Europe. The main issues are economic competitiveness with cheap gas plants and public concerns on nuclear waste disposal and safety. Strong economic growth and the shrinking of existing electricity over-capacities could favour nuclear power. Since nuclear power emits no greenhouse gases to the environment, its development could be further accelerated by a breakthrough in innovative nuclear reactor technology development. Great attention also needs to be paid to the design of new nuclear reactors, which are modularized and faster to construct, thus reducing capital investment and construction period, and thereby improving their overall economics and their compatibility with the infrastructure of, in particular, developing countries, where new energy demands are expected. This paper discusses the future world energy outlook, challenges for and progresses on nuclear power; overview of new nuclear reactor technology development; and the role of the International Atomic Energy Agency (IAEA) in the development of new innovative nuclear reactors. (author)

  9. HTR process heat applications, status of technology and economical potential

    International Nuclear Information System (INIS)

    Barnet, H.

    1997-01-01

    The technical and industrial feasibility of the production of high temperature heat from nuclear fuel is presented. The technical feasibility of high temperature heat consuming processes is reviewed and assessed. The conclusion is drawn that the next technological step for pilot plant scale demonstration is the nuclear heated steam reforming process. The economical potential of HTR process heat applications is reviewed: It is directly coupled to the economical competitiveness of HTR electricity production. Recently made statements and pre-conditions on the economic competitiveness in comparison to world market coal are reported. (author). 8 figs

  10. Accelerator Technology Program. Status report, October 1983-March 1984

    International Nuclear Information System (INIS)

    Jameson, R.A.

    1985-01-01

    This report covers major projects in the Accelerator Technology (AT) Division of the Los Alamos National Laboratory. The first sections highlight activities related to beam dynamics, inertial fusion, structure development, the racetrack microtron, and the CERN high-energy physics experiment NA-12. Discussed next is the Fusion Materials Irradiation Test Facility, followed by a summary of progress on the Proton Storage Ring and activities of the Theory and Simulation Group. The report concludes with a discussion of the H- accelerator program and a listing of papers published by AT-Division personnel during this reporting period

  11. Toward fostering the scientific and technological literacy establishment of the 'Central Scientific and Technological Museum-Institute' and nuclear development

    International Nuclear Information System (INIS)

    Murata, Takashi

    1999-01-01

    The public in general does not necessarily have enough knowledge for the reasonable decision making in the application of scientific and technological development even in the ear of the Information Society. However strongly the necessity of the consensus in the scientific policy like nuclear R and D is required, it is impossible to attain the goal, unless the scientific literacy of the general public is. In order to improve it the role of the scientific museum as a social educational facility is very important. In this respect, there still remains vast room to improve in the Japanese museum system and its activities. The concept of the 'Central Scientific and Technological Museum-Institute', which also operates very small-sized reactor for the educational use, is developed in this paper. (author)

  12. Magnetic fusion energy technology fellowship: Report on survey of institutional coordinators

    International Nuclear Information System (INIS)

    1993-02-01

    In 1980, the Magnetic Fusion Energy Technology (MFET) Fellowship program was established by the US Department of Energy, Office of Fusion Energy, to encourage outstanding students interested in fusion energy technology to continue their education at a qualified graduate school. The basic objective of the MFET Fellowship program is to ensure an adequate supply of scientists in this field by supporting graduate study, training, and research in magnetic fusion energy technology. The program also supports the broader objective of advancing fusion toward the realization of commercially viable energy systems through the research by MFET fellows. The MFET Fellowship program is administered by the Science/Engineering Education Division of Oak Ridge Institute for Science and Education. Guidance for program administration is provided by an academic advisory committee

  13. Prosthetic status and prosthetic need among the patients attending various dental institutes of ahmedabad and gandhinagar district, gujarat.

    Science.gov (United States)

    Shah, Vrinda R; Shah, Darshana N; Parmar, Chaitanya H

    2012-09-01

    The oral health being an integral part for the healthy living, necessity of disability limitation and rehabilitation in oral health has taken a paramount role. To assess the prosthetic status and to evaluate the prosthetic needs of the patients attending various institutes of Ahmedabad and Gandhinagar district. A total of 510 (264 males and 246 females) subjects at various dental institutes were examined in the study. A survey proforma was prepared with the help of WHO oral health assessment form (1997). Prosthetic status and prosthetic treatment need was recorded. Out of 510, any type of Edentulousness was 322 (63 %). Among them, 254 (49.8 %) were partially edentulous while 68 (13.3 %) were completely edentulous. Only 69 (13 %) were having any prosthesis in upper arch while only 80 (16 %) were having any prosthesis in lower arch. Need for any type of prosthesis in upper and lower arch was 55 and 60 % in males and females, respectively. In lower social class group need of prosthesis in upper and lower arch was 62 and 63 %, respectively. It was found that prosthetic status and prosthetic treatment need increased with increase in age. Steps should be taken to overcome this disparity and more emphasis should be given to meet the felt need of the people through government and non government organizations to improve the oral health. The unmet prosthetic treatment need should be met to rehabilitate needy people so that their disability may be limited.

  14. Current status of iron and steelmaking technology at Tata Steel

    Energy Technology Data Exchange (ETDEWEB)

    Pandey, B.D.; Poddar, M.N.; Chandra, S. [Tata Steel, Jamshedpur (India)

    2002-07-01

    Tata Steel was set up in the early years of the 20th century and over the years the plant has grown into one of the most modern steel plants in the world. The philosophy of phase-wise modernisation on a continuing basis was adopted by Tata Steel with great advantage for the modernisation of the two million tonne Jamshedpur Steel Works. Four phases of the modernisation programme have already been successfully completed and their gains consolidated. Adoption and absorption of the latest technologies, fundamental changes in the operating philosophy and setting of stretch performance targets have brought about this remarkable transformation. The recently commissioned state of the art 1.2 Mtpa Cold Rolling Mill Complex is an example of Tata Steel remaining in harmony with times. Another is the use of pulverised coal injection in blast furnaces. The paper highlights some of the important technological developments in integrated steel plants, particularly those being practiced at Tata Steel, in the areas of ironmaking, steelmaking, casting and rolling for retaining its competitive position in the global market with regard to cost, customer and change. 9 refs., 21 figs., 2 tabs.

  15. Current status and challenges for automotive battery production technologies

    Science.gov (United States)

    Kwade, Arno; Haselrieder, Wolfgang; Leithoff, Ruben; Modlinger, Armin; Dietrich, Franz; Droeder, Klaus

    2018-04-01

    Production technology for automotive lithium-ion battery (LIB) cells and packs has improved considerably in the past five years. However, the transfer of developments in materials, cell design and processes from lab scale to production scale remains a challenge due to the large number of consecutive process steps and the significant impact of material properties, electrode compositions and cell designs on processes. This requires an in-depth understanding of the individual production processes and their interactions, and pilot-scale investigations into process parameter selection and prototype cell production. Furthermore, emerging process concepts must be developed at lab and pilot scale that reduce production costs and improve cell performance. Here, we present an introductory summary of the state-of-the-art production technologies for automotive LIBs. We then discuss the key relationships between process, quality and performance, as well as explore the impact of materials and processes on scale and cost. Finally, future developments and innovations that aim to overcome the main challenges are presented.

  16. Remote participation technologies in the EFDA Laboratories - status and prospects

    International Nuclear Information System (INIS)

    Schmidt, V.; How, J.A.

    2003-01-01

    More than 25 laboratories of the European Fusion Development Agreement (EFDA) have been increasingly using remote participation (RP) technologies for collaborative work on several experiments. We present an overview of the technologies that are employed to provide remote data access, remote computer access, and tele-conference. We also deal with computer network requirements, and support and documentation needs. The biggest application of these tools has been the joint scientific exploitation of the JET Facilities. Increasingly other experiments are operated as shared facilities, and the RP tools are being used in this context. For remote data access there is a clear trend towards MDSplus as common data access layer for multi-experiment data access. Secure Remote Computer access is converging on two different solutions. Video-conference is also converging on two partially inter-operable solutions, whereas the sharing of presentation material is converging on one solution. Remote Control Room participation is being used in two laboratories. Network monitoring has been developed and is now in routine use. The RP work is being done at many laboratories and is co-ordinated by EFDA. A number of items in several fields need still to be tackled and an overview of these is presented. (authors)

  17. Remote participation technologies in the EFDA Laboratories - status and prospects

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, V. [Associazione EURATOM-ENEA sulla Fusione, Consorzio RFX, Padova (Italy); How, J.A. [Association Euratom-CEA Cadarache, 13 - Saint-Paul-lez-Durance (France). Dept. de Recherches sur la Fusion Controlee

    2003-07-01

    More than 25 laboratories of the European Fusion Development Agreement (EFDA) have been increasingly using remote participation (RP) technologies for collaborative work on several experiments. We present an overview of the technologies that are employed to provide remote data access, remote computer access, and tele-conference. We also deal with computer network requirements, and support and documentation needs. The biggest application of these tools has been the joint scientific exploitation of the JET Facilities. Increasingly other experiments are operated as shared facilities, and the RP tools are being used in this context. For remote data access there is a clear trend towards MDSplus as common data access layer for multi-experiment data access. Secure Remote Computer access is converging on two different solutions. Video-conference is also converging on two partially inter-operable solutions, whereas the sharing of presentation material is converging on one solution. Remote Control Room participation is being used in two laboratories. Network monitoring has been developed and is now in routine use. The RP work is being done at many laboratories and is co-ordinated by EFDA. A number of items in several fields need still to be tackled and an overview of these is presented. (authors)

  18. Periodontal Status and Some Variables among Pregnant Women in a Nigeria Tertiary Institution.

    Science.gov (United States)

    Onigbinde, Oo; Sorunke, Me; Braimoh, Mo; Adeniyi, Ao

    2014-11-01

    Gingival changes during pregnancy have been well-documented. The prevalence of gingivitis in pregnant women has reportedly ranged from 30% to 100%. Increase in both the rate of estrogen metabolism and synthesis of prostaglandins by the gingiva contributed to the gingival changes observed during pregnancy. In effect increased prevalence of dental caries, gingivitis, periodontitis and tooth mobility may be encountered in pregnancy. The purpose of the study was to determine the association of some variables and the periodontal status in a sample of pregnant women attending the Ante Natal Clinic (ANC) of Lagos State University Teaching Hospital (LASUTH), Ikeja, Lagos. Women at various stages of pregnancy, attending the ANC of LASUTH, constituted the target population. The questionnaire was administered on each patient followed by dental examinations. Periodontal status was assessed using the community periodontal index (CPI) of treatment needs. Oral hygiene status was evaluated according to Green and Vermilion simplified oral hygiene index (OHI-S). The association between the CPI scores; OHI-S scores and variables such as trimester and dental visits were statistically significant. This study indicated that the gestational age of pregnancy and dental visits have a definite impact on the periodontal status. Oral health education should be included as an integral part of antenatal care to increase the women awareness. This would improve the mothers' dental care-seeking behavior.

  19. Assessing the Status of Entrepreneurship Education Courses in Higher Learning Institutions

    Science.gov (United States)

    Fulgence, Katherine

    2015-01-01

    Purpose: The purpose of this paper is to assess the status of entrepreneurship courses offered in education schools. It provides recommendations for how to address the existing challenges by developing entrepreneurship initiatives in education schools. Design/Methodology/Approach: A survey was circulated to the management of all education schools…

  20. Colliding beam experiments in the Siberian Institute for Nuclear Physics (Present status and prospects)

    International Nuclear Information System (INIS)

    Budker, G.I.

    1982-01-01

    Present status of construction of colliding (electron, positron, proton, antiproton and muon) beam facilities is described. Experiments conducted at the VEP-1 and VEPP-2 facilities in 1968-1970 are enumerated. The program of forthcoming investigations at the VAPP-NAP facility is described in brief

  1. The Effects of Education on Occupational Status and Earnings. Institute for Research on Poverty Discussion Papers.

    Science.gov (United States)

    Olneck, Michael R.

    This paper investigated the effects of educational attainment on occupational status and earnings among men. Drawing on nine data sets, it attempted to assess the effects of schooling that persist after measured and unmeasured aspects of family background, and measured cognitive skill were controlled. It also examined differences in the effects of…

  2. Status of core nuclear design technology for future fuel

    International Nuclear Information System (INIS)

    Joo, Hyung Kook; Jung, Hyung Guk; Noh, Jae Man; Kim, Yeong Il; Kim, Taek Kyum; Gil, Choong Sup; Kim, Jung Do; Kim, Young Jin; Sohn, Dong Seong

    1997-01-01

    The effective utilization of nuclear resource is more important factor to be considered in the design of next generation PWR in addition to the epochal consideration on economics and safety. Assuming that MOX fuel can be considered as one of the future fuel corresponding to the above request, the establishment of basic technology for the MOX core design has been performed : : the specification of the technical problem through the preliminary core design and nuclear characteristic analysis of MOX, the development and verification of the neutron library for lattice code, and the acquisition of data to be used for verification of lattice and core analysis codes. The following further studies will be done in future: detailed verification of library E63LIB/A, development of the spectral history effect treatment module, extension of decay chain, development of new homogenization for the MOX fuel assembly. (author). 6 refs., 7 tabs., 2 figs

  3. Accelerator technology program. Status report, July-December 1982

    International Nuclear Information System (INIS)

    Jameson, R.A.

    1984-05-01

    Major projects of the Los Alamos National Laboratory's Accelerator Technology Division are discussed, covering activities that occurred during the last six months of calendar 1982. The first sections report highlights in beam dynamics, accelerator inertial fusion, radio-frequency structure development, the racetrack microtron, CERN high-energy physics experiment NA-12, and high-flux radiographic linac study. Next we report on selected proton Storage Ring activities that have made significant progress during this reporting period, followed by an update on the free electron laser. The Fusion Materials Irradiation Test Facility work is discussed next, then progress on the klystron development project and on the gyrocon project. The activities of the newly formed Theory and Simulation Group are outlined. The last section covers activities concerning the accelerator test stand for the neutral particle beam program

  4. Current Status on Stress Diagnostic Kit and Detection Technology

    International Nuclear Information System (INIS)

    Park, Sang Hyun; Choi, Mi Hee; Ko, Kyong Cheol

    2008-06-01

    The accurate measurement of a stress level is one of the most important issues in a stress diagnosis and its measurement could be of great value in clinical medicine. Stress has a potent effect on the spirit and physical condition of an individual. There are various methods available for its measurement. Some of the commonly used techniques for the diagnosis of a stress level include analysis of the body fluids, questionnaire assessments, psychophysiological evaluations and by determining heart rate variability (HRV) of subjects. However, the existing diagnostic methods have several defects like, a low sensitivity, inaccuracy and long of operation time. In this report, we present a diagnostic technology to detect a stress level which is the origin of various diseases. This method can be of great help in providing an early diagnosis through a biosensor and might play a vital role in preventing diseases like hypochondria and hypertension. Majority of the human population is exposed to stress in one way or another and hence developing a convenient stress diagnosis kit will be of great use to all. This stress diagnostic kit and detection technology dose not involve simple a mechanical measurement or questionnaires, but is based on developing a detection kit with a high sensitivity, which will mean an easy use for common man. Individuals can undergo regular check ups and can personally diagnose their present situation of health by determining their stress levels, thus enabling them to diagnose the early onset of several stress disorders. This might help them take precautionary measures and thereby lead to a healthy life

  5. The status of fast reactor technology development in China

    International Nuclear Information System (INIS)

    Xu Mi

    1998-01-01

    The paper will outline the main activities on fast reactor technology in China. In the year 1996, with the increasing of about 15 GWe installed electricity capacity, the total national electricity generation capacity has reached 225 GWe in the Country. Two nuclear power plants, Qinshan Phase 1 and Daya Bay have their rather good operation. The load factor of Qinshan Phase 1 was 84.7%. 76.1% and 64.1% for Daya Bay Unit 1 and Unit 2 respectively. During the Ninth 5-year (from 1996 to 2000) four NPPs Consisting of eight units of installed 6620MWe will be constructed. Under the framework of the High Technology Programme the Chinese Experimental Fast Reactor (CEFR) with the power 65MWth matched with 25MWe turbine-generator is still under preliminary design stage, which is sodium cooled pool type, (Pu,U)O 2 as fuel, in-core primary Went fuel storage, two mechanical pumps and four intermediate heat exchangers for primary circuit two loops for secondary circuits two independent immersed heat exchangers and air coolers with high stacks for passive residual heat removal system. Some design changes are presented in the paper. Concerning the R and D for the CEFR, besides the facilities already prepared, for demonstration of thermohydraulic characteristics of natural convection, a water simulation reactor pool facility in about one third scale is planned, in order to prepare the reactor physics experiments for its start-up, the zero power fast neutron facility with 50kg U-235 has been restored, for endurance testing of core subassemblies and getting some sodium loop operation experiences, Italian ESPRESSO and CEDI are under reconstruction in our lab. As for the engineering preparation of the project CEFR, the Feasibility Study Report was approved by Authorities on November last year. The site preparation and the design of incorporated to grid are just started. Finally, the activities of the international cooperation are presented in the paper. (author)

  6. Current Status on Stress Diagnostic Kit and Detection Technology

    Energy Technology Data Exchange (ETDEWEB)

    Park, Sang Hyun; Choi, Mi Hee; Ko, Kyong Cheol

    2008-06-15

    The accurate measurement of a stress level is one of the most important issues in a stress diagnosis and its measurement could be of great value in clinical medicine. Stress has a potent effect on the spirit and physical condition of an individual. There are various methods available for its measurement. Some of the commonly used techniques for the diagnosis of a stress level include analysis of the body fluids, questionnaire assessments, psychophysiological evaluations and by determining heart rate variability (HRV) of subjects. However, the existing diagnostic methods have several defects like, a low sensitivity, inaccuracy and long of operation time. In this report, we present a diagnostic technology to detect a stress level which is the origin of various diseases. This method can be of great help in providing an early diagnosis through a biosensor and might play a vital role in preventing diseases like hypochondria and hypertension. Majority of the human population is exposed to stress in one way or another and hence developing a convenient stress diagnosis kit will be of great use to all. This stress diagnostic kit and detection technology dose not involve simple a mechanical measurement or questionnaires, but is based on developing a detection kit with a high sensitivity, which will mean an easy use for common man. Individuals can undergo regular check ups and can personally diagnose their present situation of health by determining their stress levels, thus enabling them to diagnose the early onset of several stress disorders. This might help them take precautionary measures and thereby lead to a healthy life.

  7. Status of fusion technology development in JAERI stressing steady-state operation for future reactors

    International Nuclear Information System (INIS)

    Matsuda, Shinzaburo

    2000-01-01

    This paper reports on the progress of the fusion reactor technologies developed at the Japan Atomic Energy Research Institute (JAERI) and expected to lead to a future steady state operation reactor. In particular, superconducting coil technology for plasma confinement, NBI and RF systems technology for plasma control and current drive, fueling and pumping systems technology for particle control, heat removal technology, and development of long life materials are highlighted as the important key elements for the future steady state operation. It will be discussed how these key technologies have already been developed by the ITER (International Thermonuclear Experimental Reactor) technology R and D as well as by the Japanese domestic program, and which technologies are planned for the near future

  8. Status and future perspectives of PWR and comparing views on WWER fuel technology

    International Nuclear Information System (INIS)

    Weidinger, H.

    2003-01-01

    The main purpose of this paper is to give an overview on status and future perspectives of the Western PWR fuel technology. For easer understanding and correlating, some comparing views to the WWER fuel technology are provided. This overview of the PWR fuel technology of course can not go into the details of the today used designs of fuel, fuel rods and fuel assemblies. However, it tries to describe the today achieved capability of PWR fuel technology with regard to reliability, efficiency and safety

  9. Status of technology for isolating high-level radioactive wastes in geologic repositories

    International Nuclear Information System (INIS)

    Klingsberg, C.; Duguid, J.

    1980-10-01

    This report attempts to summarize the status of scientific and technological knowledge relevant to long-term isolation of high-level and transuranic wastes in a mined geologic repository. It also identifies and evaluates needed information and identifies topics in which work is under way or needed to reduce uncertainties. The major findings and conclusions on the following topics are presented: importance of the systems approach; prospects for successful isolation of wastes; need for site-specific investigations; human activities in the future; importance of modelling; disposal of transuranic wastes; status of technology of isolation barriers, performance assessment, site selection and characterization, and potential host rocks

  10. HEALTH STATUS AND PSYCHO-PHYSIOLOGICAL PROBLEMS OF PUPILS' GOING TO NEW TYPES OF EDUCATIONAL INSTITUTION

    Directory of Open Access Journals (Sweden)

    A.G. Mutalov

    2007-01-01

    Full Text Available The paper deals with complex assessment of somatic and psychological health of schoolchildren trained in private sector of educational institutions. The results of the programme developed and introduced into the educational process are presented in the paper. This programme entitled medico- psychological and pedagogical adaptation improves psychosocial capacities of schoolchildren.Key words: schoolchild, health, psychosocial adaptation.

  11. Technology status in support of refined technical baseline for the Spent Nuclear Fuel project. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Puigh, R.J.; Toffer, H.; Heard, F.J.; Irvin, J.J.; Cooper, T.D.

    1995-10-20

    The Spent Nuclear Fuel Project (SNFP) has undertaken technology acquisition activities focused on supporting the technical basis for the removal of the N Reactor fuel from the K Basins to an interim storage facility. The purpose of these technology acquisition activities has been to identify technology issues impacting design or safety approval, to establish the strategy for obtaining the necessary information through either existing project activities, or the assignment of new work. A set of specific path options has been identified for each major action proposed for placing the N Reactor fuel into a ``stabilized`` form for interim storage as part of this refined technical basis. This report summarizes the status of technology information acquisition as it relates to key decisions impacting the selection of specific path options. The following specific categories were chosen to characterize and partition the technology information status: hydride issues and ignition, corrosion, hydrogen generation, drying and conditioning, thermal performance, criticality and materials accountability, canister/fuel particulate behavior, and MCO integrity. This report represents a preliminary assessment of the technology information supporting the SNFP. As our understanding of the N Reactor fuel performance develops the technology information supporting the SNFP will be updated and documented in later revisions to this report. Revision 1 represents the incorporation of peer review comments into the original document. The substantive evolution in our understanding of the technical status for the SNFP (except section 3) since July 1995 have not been incorporated into this revision.

  12. Technology status in support of refined technical baseline for the Spent Nuclear Fuel project. Revision 1

    International Nuclear Information System (INIS)

    Puigh, R.J.; Toffer, H.; Heard, F.J.; Irvin, J.J.; Cooper, T.D.

    1995-01-01

    The Spent Nuclear Fuel Project (SNFP) has undertaken technology acquisition activities focused on supporting the technical basis for the removal of the N Reactor fuel from the K Basins to an interim storage facility. The purpose of these technology acquisition activities has been to identify technology issues impacting design or safety approval, to establish the strategy for obtaining the necessary information through either existing project activities, or the assignment of new work. A set of specific path options has been identified for each major action proposed for placing the N Reactor fuel into a ''stabilized'' form for interim storage as part of this refined technical basis. This report summarizes the status of technology information acquisition as it relates to key decisions impacting the selection of specific path options. The following specific categories were chosen to characterize and partition the technology information status: hydride issues and ignition, corrosion, hydrogen generation, drying and conditioning, thermal performance, criticality and materials accountability, canister/fuel particulate behavior, and MCO integrity. This report represents a preliminary assessment of the technology information supporting the SNFP. As our understanding of the N Reactor fuel performance develops the technology information supporting the SNFP will be updated and documented in later revisions to this report. Revision 1 represents the incorporation of peer review comments into the original document. The substantive evolution in our understanding of the technical status for the SNFP (except section 3) since July 1995 have not been incorporated into this revision

  13. Differences in technology innovation R&D performance creation behavior between for-profit institutions and not-for-profit institutions.

    Science.gov (United States)

    Park, Sungmin

    2016-01-01

    The present study compares the performance creation behavior between for-profit institutions and not-for-profit institutions within a national technology innovation research and development (R&D) program. Based on the stepwise performance creation chain structure of typical R&D logic models, a series of successive binary logistic regression models is newly proposed. Using the models, a sample of n = 2076 completed government-sponsored R&D projects was analyzed. For each institution type, its distinctive behavior is diagnosed, and relevant implications are suggested for improving the R&D performance.

  14. Institutional Means for Ensuring the Technological Leadership of Germany in the EU Economic System

    Directory of Open Access Journals (Sweden)

    Dovgal Olеna A.

    2017-09-01

    Full Text Available The article focuses on the analysis of institutional means for ensuring the technological leadership of Germany in the economic system of the EU. The main idea of all the programs and strategies of the European Union is to ensure competitive and dynamic development. Germany occupies a leading position in many respects both in the European and global technology market, which is due to the country’s strong scientific potential and the high level of spending on R&D. The article compares the tasks of the national high-tech strategy of the FRG and the strategy of the EU Innovation Union. There generalized the functions of the main components of the system of scientific associations of the Federal Republic of Germany, which are an effective tool for implementing the state policy in the field of innovation investment. An approach to qualitative assessment of the level of information interaction of the subjects in the system of R&D institutes and the diffusion of technologies using the criterion of information communication is proposed. A prospect for further research on this issue is a comprehensive analysis of the main components of Germany’s innovation strategy in the EU economic system.

  15. Current status of low-level-waste-segregation technology

    International Nuclear Information System (INIS)

    Clark, D.E.; Colombo, P.; Sailor, V.L.

    1982-01-01

    The adoption of improved waste segregation practices by waste generators and burial sites will result in the improved disposal of low-level wastes (LLW) in the future. Many of the problems connected with this disposal mode are directly attributable to or aggravated by the indiscriminate mixing of various waste types in burial trenches. Thus, subsidence effects, contact with ground fluids, movement of radioactivity in the vapor phase, migration of radionuclides due to the presence of chelating agents or products of biological degradation, deleterious chemical reactions, and other problems have occurred. Regulations are currently being promulgated which will require waste segregation to a high degree at LLW burial sites. The state-of-the-art of LLW segregation technology and current practices in the USA have been surveyed at representative facilities. Favorable experience has been reported at various sites following the application of segregation controls. This paper reports on the state-of-the-art survey and addresses current and projected LLW segregation practices and their relationship to other waste management activities

  16. Dose management in radiology. Review of the technological status

    International Nuclear Information System (INIS)

    Verius, M.

    2015-01-01

    The Euratom directive 2013/59 (''EU directive for radiation protection'') has to be implemented into national law by spring 2018 and requires a complete recording of patient dosages and relevant parameters. Additionally, a medical physics expert has to be consulted for each radiological examination above a defined threshold. A complete recording of the dosage administered from all modalities and optimization of the radiological procedures should result in a reduction of the total dosage. This can be achieved by automated systems that incorporate not only the detection of the dose parameters but also the evaluation and analysis of these data. When provided with warning levels such a system should be able to inform or warn the operator when dose thresholds have been exceeded or even better inform the operator about possible excess dosages before an examination. Depending on the information provided by the modality, dose management systems can operate at different levels in the picture archiving and communication system (PACS), radiological and hospital information systems (RIS/HIS) or with the header information of a digital imaging and communications in medicine (DICOM) image and evaluate and analyze this data. A practicable use of such systems is only possible by close cooperation of medical personnel, medical physicists and information technology (IT) administrators. Various systems are available commercially or free but an individual adaptation of these systems is useful and necessary, depending on the requirements of the radiology practice or hospital. (orig.) [de

  17. The status of fast reactor technology development in China

    International Nuclear Information System (INIS)

    Xu Mi

    2000-01-01

    Considering the future clean energy supply in China, a rather consistent opinion is to develop nuclear power step by step with the contribution from a supplementary one up to an important one. The large scale utilization of nuclear energy obviously determines the interest in fast breeders; China right now already has about 300 GWe total electricity capacity using conventional energy resources. As the first step for fast reactor technology development in the country, the China Experimental Fast Reactor (CEFR) project is still under detail design stage, which is a sodium cooled pool type fast reactor with 65 MW thermal power matched with a turbine-generator of 25 MW. The ordering of the components is continuing. The site is ready and the steel works for the 3 m x 69 m x 82.5 m foundation base of reactor building are being arranged layer by layer. The review to the PSAR by the China National Nuclear Safety Administration (CNNSA) is going to the final stage, if everything goes smoothly. The first pouring of the concrete for the reactor building will be in the middle of the year 2000. The brief introduction of the CEFR design, safety characteristics, the main results of the safety analysis and design test demonstration are given in the paper. (author)

  18. Accelerator Technology Program. Status report, January-September 1983

    International Nuclear Information System (INIS)

    Jameson, R.A.

    1984-07-01

    This report presents highlights of major projects in the Accelerator Technology Division of the Los Alamos National Laboratory. The first section deals with the Fusion Materials Irradiation Test Facility's 2-MeV accelerator on which tests began in May, as scheduled. Then, activities are reported on beam dynamics, inertial fusion, structure development, the racetrack microtron, the CERN high-energy physics experiment NA-12, and LAMPF II. The Proton Storage Ring is discussed next, with emphasis on the computer control system, diagnostics interfacing, and theoretical support. Other sections summarize progress on a portable radiographic linac, developments on the klystron code, and on permanent magnets. Activities of the Theory and Simulation Group are outlined next, followed by discussion of the oscillator experiment and the energy-recovery experiment in the free electron laser project. The last section reports on the accelerator test stand. An unusual and very satisfying activity for the Division was the hosting of the 1983 Particle Accelerator Conference in Santa Fe, March 21-23, 1983. The conference had the largest attendance ever, with 895 registrants, 61 invited papers, and 521 contributed papers

  19. Technology in the Marketing Activities of Schools as an Example to Institutional Isomorphism

    Directory of Open Access Journals (Sweden)

    B. Çağla Garipağaoğlu

    2013-08-01

    Full Text Available The purpose of this study is to understand and explore the isomorphic changes in the private school chain sector in Turkey over the last five years regarding the effects of recent technology adoptions for school marketing activities. Qualitative research model was used and the two largest school chains were selected with concept sampling strategy. To collect data, we interviewed the chief marketing officers of the two selected school chains by using a semi-structured interview guideline. The data was analyzed by using content analysis. The results of the study provide a relatively new perspective based on the concept of institutional isomorphism to the use of technologies for marketing purposes (both as a marketing tool and a marketing product in the private school chain sector. The results show that technology is a powerful marketing product, which is used by schools as a marketing strategy, as well. This eventually leads to convergence of learning environments in different schools. Technology is considered to be a powerful tool for marketing school’s activities, as well, and this power is acknowledged by both school chains. Similarly, use of technology as a marketing tool becomes an isomorphic force for the two competing schools.

  20. Radiation processing of polymers and semiconductors at the Institute of Nuclear Chemistry and Technology

    International Nuclear Information System (INIS)

    Zimek, Z.; Przybytniak, G.; Kaluska, I.

    2006-01-01

    R(and)D studies in the field of radiation technology in Poland are mostly concentrated at the Institute of Nuclear Chemistry and Technology (INCT). The results of the INCT works on polymer and semiconductor modification have been implemented in various branches of national economy, particularly in industry and medicine. Radiation technology for polymer modification was implemented in the middle of the 1970-ties. Among others, the processes of irradiation and heat shrinkable products expansion have been developed. The transfer of this technology to Polish industry was performed in the middle of the 1980-ties. The present study aims at the formulation of new PE composites better suited to new generation of heat shrinkable products, for example, a new generation of hot-melt adhesives has been developed to meet specific requirements of customers. Modified polypropylene was used for the production of medical devices sterilized by radiation, especially disposable syringes, to overcome the low radiation resistance of the basic material. Modified polypropylene (PP-M) has been formulated at the INCT to provide material suitable for medical application and radiation sterilization process. Modification of semiconductor devices by EB was applied on an industrial scale since 1978 when the INCT and the LAMINA semiconductor factory successfully adopted that technology to improve specific semiconductor devices. This activity is continued on commercial basis where the INCT facilities served to contract irradiation of certain semiconductor devices according to the manufacturing program of the Polish factory and customers from abroad. (author)

  1. Technologies development for environmental restoration and waste management: International university and research institution and industry partnerships

    International Nuclear Information System (INIS)

    Herndon, R.C.; Moerlins, J.E.; Kuperberg, J.M.

    1996-01-01

    The Institute for Central and Eastern European Cooperative Environmental Research (ICEECER) at Florida State University was formed in 1990 soon after the end of the Cold War. ICEECER consists of a number of joint centers which link FSU, and US as well as international funding agencies, to academic and research institutions in Hungary, Poland, the Czech Republic, Russia, and the other countries of Central and Eastern Europe and the Newly Independent States. Areas of interest include risk assessment, toxicology, contaminated site remediation/characterization, waste management, emergency response, environmental technology development/demonstration/transfer, and some specialized areas of research (e.g., advanced chemical separations). Through ICEECER, numerous international conferences, symposia, training courses, and workshops have also been conducted on a variety of environmental topics. This paper summarizes the mission, structure, and administration of ICEECER and provides information on the projects conducted through this program at FSU

  2. Quality management system and accreditation of the in vivo monitoring laboratory at Karslruhe Institute of Technology.

    Science.gov (United States)

    Breustedt, B; Mohr, U; Biegard, N; Cordes, G

    2011-03-01

    The in vivo monitoring laboratory (IVM) at Karlsruhe Institute of Technology (KIT), with one whole body counter and three partial-body counters, is an approved lab for individual monitoring according to German regulation. These approved labs are required to prove their competencies by accreditation to ISO/IEC 17025:2005. In 2007 a quality management system (QMS), which was successfully audited and granted accreditation, was set up at the IVM. The system is based on the ISO 9001 certified QMS of the central safety department of the Research Centre Karlsruhe the IVM belonged to at that time. The system itself was set up to be flexible and could be adapted to the recent organisational changes (e.g. founding of KIT and an institute for radiation research) with only minor effort.

  3. Research and development on activation analysis at the Thailand Institute of Nuclear Technology

    International Nuclear Information System (INIS)

    Laoharojanaphand, S.; Dharmavanij, W.; Busamongkol, A.; Pareepart, R.; Wimolwattanapun, W.; Chantarachot, W.

    2008-01-01

    Research and development in activation analysis at the Thailand Institute of Nuclear Technology has been carried out over 40 years. The main activation source is from the TRIGA type research reactor TRR1/M1. Average in-core flux is around 10 13 n x cm -2 x s -1 . Experience on the analysis of various kind of samples range from environmental field especially air particulate, ores, rocks and soil for natural resources exploration as well as industrial applications. Elemental composition in silk thread, silk cocoon and silk products from the royal silk project are one of the research work done incorporation with the Queen Sirikit Institute of Sericulture. Food items are also another topic of interest to our research team. (author)

  4. TOOLS OF KNOWLEDGE DISSEMINATION WITHIN A NATIONAL DEFENSE INSTITUTION FOR INNOVATION, TECHNOLOGY AND SCIENCE

    Directory of Open Access Journals (Sweden)

    Edson Aparecida de Araújo Querido Oliveira

    2006-11-01

    Full Text Available This paper describes and analyzes in a National Defense Institution for Innovation, Technology and Science its tools of knowledge dissemination. The methodology contemplates the period of 2004 and 2005. Qualitative and quantitative information orientate the research in order to understand focal aspects on knowledge dissemination, in comparison with theoretical references of renowned authors and other elaborated research searching for elements to perform an organizational diagnosis, focused on the knowledge dissemination as well as on the forces which promote or obstruct the organizational development. Conclusions are that the tools of knowledge dissemination must suitable to spread the tacit knowledge in such a way as the explicit ones and that, in a National Defense Institution, other important aspects must be considered, a time that, being the spread knowledge of wrong form can, besides bringing damages for the organization, to compromise the national sovereignty.

  5. Establishment of a Quantitative Medical Technology Evaluation System and Indicators within Medical Institutions.

    Science.gov (United States)

    Wu, Suo-Wei; Chen, Tong; Pan, Qi; Wei, Liang-Yu; Wang, Qin; Li, Chao; Song, Jing-Chen; Luo, Ji

    2018-06-05

    The development and application of medical technologies reflect the medical quality and clinical capacity of a hospital. It is also an effective approach in upgrading medical service and core competitiveness among medical institutions. This study aimed to build a quantitative medical technology evaluation system through questionnaire survey within medical institutions to perform an assessment to medical technologies more objectively and accurately, and promote the management of medical quality technologies and ensure the medical safety of various operations among the hospitals. A two-leveled quantitative medical technology evaluation system was built through a two-round questionnaire survey of chosen experts. The Delphi method was applied in identifying the structure of evaluation system and indicators. The judgment of the experts on the indicators was adopted in building the matrix so that the weight coefficient and maximum eigenvalue (λ max), consistency index (CI), and random consistency ratio (CR) could be obtained and collected. The results were verified through consistency tests, and the index weight coefficient of each indicator was conducted and calculated through analytical hierarchy process. Twenty-six experts of different medical fields were involved in the questionnaire survey, 25 of whom successfully responded to the two-round research. Altogether, 4 primary indicators (safety, effectiveness, innovativeness, and benefits), as well as 13 secondary indicators, were included in the evaluation system. The matrix is built to conduct the λ max, CI, and CR of each expert in the survey, and the index weight coefficients of primary indicators were 0.33, 0.28, 0.27, and 0.12, respectively, and the index weight coefficients of secondary indicators were conducted and calculated accordingly. As the two-round questionnaire survey of experts and statistical analysis were performed and credibility of the results was verified through consistency evaluation test, the

  6. Silver-zinc: status of technology and applications

    Energy Technology Data Exchange (ETDEWEB)

    Karpinski, A.P.; Makovetski, B.; Russell, S.J.; Serenyi, J.R.; Williams, D.C. [Yardney Technical Products, Pawcatuck, CT (United States)

    1999-07-01

    Michel Yardney and Professor Henri Andre developed the first practical silver-zinc battery more than 55 years ago. Since then, primary and rechargeable silver-zinc batteries have attracted a variety of applications due to their high specific energy/energy density, proven reliability and safety, and the highest power output per unit weight and volume of all commercially available batteries. Although significant improvements have been achieved on traditional systems such as lead-acid and nickel/cadmium, and in spite of the advent of new electrochemistries such as lithium-ion and nickel/metal hydride, many users still rely on silver-zinc to satisfy their most demanding and critical requirements. Over the past few years, several of the internal components have been subject to many studies which resulted in significant improvements in the battery wet life and cycle life. Specifically, these include new separator materials which offer an alternative to the cellulosic membranes, improvements to the zinc electrode that include additives that help reduce shape-change and dendritic growth, and to a lesser extent, process changes to the silver electrode and additives to the electrolyte. In comparison, the commonly used secondary systems are lead-acid, nickel/cadmium, nickel/metal hydride, and lithium-ion. Each has attributes which make them desirable for certain applications. Where low cost, high voltage, and high rate capability is required, the lead-acid battery is an obvious choice whenever size and weight are not critical. For applications requiring longer wet life, moderate rate capability, and high cycle life, nickel/cadmium or nickel/metal hydride can be used in spite of their poor charge retention and higher costs. Relatively newer systems are also available such as lithium-ion or lithium polymer technology which are preferred for their high voltage and excellent cycle life. Among the disadvantages of these systems are higher costs, limited configurations (usually

  7. The status of fast reactor technology development in China

    International Nuclear Information System (INIS)

    Xu, M.

    2002-01-01

    China, as a developing country with a great number of population and relatively less energy resources, reasonably emphasizes the nuclear energy utilization development. For the long term sustainable energy supply, as for nuclear application the basic strategy of PWR-FBR-Fusion has been settled and envisaged. Due to the economy and experience reasons the nuclear power and technology development with a moderate style are kept in China up to now. In China mainland apart from two NPPs with the total capacity of 2.1 GWe in operation, four NPPs are under construction and two NPPs are planned for the Tenth Five Year Plan (2001-2005). Also another one or two NPPs are still in discussion. It could be foreseen that the total nuclear power capacity will reach 8.5GWe before the year 2005 and 14-15 GWe before 2010 respectively. As the first step for the Chinese fast reactor engineering development the 65MWt China Experimental Fast Reactor (CEFR) is under construction. The main components of primary, secondary and tertiary circuits and of fuel handling system have been ordered. The reactor building under construction has reached 16.8m above the ground. Forty seven components and shielding doors have been installed. It is planned that the construction of reactor building with about 40,000m2 floor surface will be completed in the end of the year 2002 and envisaged that the first criticality of the CEFR will be in the end of 2005. The second step of the Chinese fast reactor engineering development is a 300MWe Prototype Fast Breeder Reactor which is only under consideration up to now. Some important technical selections have been settled, but its design has not yet started. (author)

  8. NASA's Solar System Exploration Research Virtual Institute: Science and Technology for Lunar Exploration

    Science.gov (United States)

    Schmidt, Greg; Bailey, Brad; Gibbs, Kristina

    2015-01-01

    The NASA Solar System Exploration Research Virtual Institute (SSERVI) is a virtual institute focused on research at the intersection of science and exploration, training the next generation of lunar scientists, and development and support of the international community. As part of its mission, SSERVI acts as a hub for opportunities that engage the larger scientific and exploration communities in order to form new interdisciplinary, research-focused collaborations. The nine domestic SSERVI teams that comprise the U.S. complement of the Institute engage with the international science and exploration communities through workshops, conferences, online seminars and classes, student exchange programs and internships. SSERVI represents a close collaboration between science, technology and exploration enabling a deeper, integrated understanding of the Moon and other airless bodies as human exploration moves beyond low Earth orbit. SSERVI centers on the scientific aspects of exploration as they pertain to the Moon, Near Earth Asteroids (NEAs) and the moons of Mars, with additional aspects of related technology development, including a major focus on human exploration-enabling efforts such as resolving Strategic Knowledge Gaps (SKGs). The Institute focuses on interdisciplinary, exploration-related science focused on airless bodies targeted as potential human destinations. Areas of study represent the broad spectrum of lunar, NEA, and Martian moon sciences encompassing investigations of the surface, interior, exosphere, and near-space environments as well as science uniquely enabled from these bodies. This research profile integrates investigations of plasma physics, geology/geochemistry, technology integration, solar system origins/evolution, regolith geotechnical properties, analogues, volatiles, ISRU and exploration potential of the target bodies. New opportunities for both domestic and international partnerships are continually generated through these research and

  9. Direct disposal of spent nuclear fuel. The current status of technology January 1987

    International Nuclear Information System (INIS)

    Wheelton, I.S.; Kelly, B.R.; Wood, E.

    1987-02-01

    The Study assesses the degree and status of research and development worldwide on Direct Disposal of Spent Nuclear Fuel. It is limited to technological, radiological and waste management aspects appertaining to Light Water and AGR Reactor Systems and reviews the 'State of the Art' in terms of applicability to the United Kingdom. The report concludes that much technology exists both at National and International level which the UK can apply to the subject of Direct Disposal. (author)

  10. Status of thermal imaging technology as applied to conservation-update 1

    Energy Technology Data Exchange (ETDEWEB)

    Snow, F.J.; Wood, J.T.; Barthle, R.C.

    1980-07-01

    This document updates the 1978 report on the status of thermal imaging technology as applied to energy conservation in buildings. Thermal imaging technology is discussed in terms of airborne surveys, ground survey programs, and application needs such as standards development and lower cost equipment. Information on the various thermal imaging devices was obtained from manufacturer's standard product literature. Listings are provided of infrared projects of the DOE building diagnostics program, of aerial thermographic firms, and of aerial survey programs. (LCL)

  11. CATHEDRAL BASIC EDUCATIONAL INSTITUTIONS AS A BASIS FOR FORMING TECHNOLOGY TEACHER COMPETENCE

    Directory of Open Access Journals (Sweden)

    В. М. Жураковская

    2014-04-01

    Full Text Available The article offers a review of the activities of the cathedral basic educational institutions (KBOU - Lyceum Istra, Moscow region, which implements one of the scientific and methodological areas of activity - the introduction of new educational technologies and principles of the organization of the educational process to ensure effective implementation of key provisions of the federal state educational standards basic general education. The paper proposed a structure of didactic games and one of its examples, focused on becoming a high school student individuality.Purchase on Elibrary.ru > Buy now

  12. Electric Power Research Institute Environmental Control Technology Center Report to the Steering Committee

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    1998-01-12

    Operations and maintenance continued this month at the Electric Power Research Institute's (EPRI's) Environmental Control Technology Center (ECTC). Testing for the month involved the Dry Sorbent Injection (DSI) test block with the Carbon Injection System. The 1.0 MW Cold-Side Selective Catalytic Reduction (SCR) unit, the 0.4 MW Mini-Pilot Wet Scrubber, and the 4.0 MW Pilot Wet Scrubber remained idle this month in a cold-standby mode and were inspected regularly. These units remain available for testing as future project work is identified.

  13. Biogas technology dissemination in Ghana: history, current status, future prospects, and policy significance

    Energy Technology Data Exchange (ETDEWEB)

    Bensah, Edem Cudjoe [Chemical Engineering Department, Kumasi Polytechnic, Box 854, Kumasi (Ghana); Brew-Hammond, Abeeku [Faculty of Mechanical and Agricultural Engineering, Kwame Nkrumah University of Science and Technology (KNUST), Private Mail Bag, Kumasi (Ghana)

    2010-07-01

    Despite numerous benefits derived from biogas technology, Ghana is yet to develop a major programme that will promote the dissemination of biogas plants on a larger scale. This paper reviews biogas installations in Ghana and investigates challenges facing the design, construction, and operation of biogas plants. It further captures the current status and functions of biogas plants as well as the impact of these plants on the people who use them. The study was done by surveying fifty (50) biogas installations, and conducting interviews with both plant users and service providers. From the survey, twenty-nine (58 %) installations were institutional, fourteen (28 %) were household units, and the remaining seven (14 %) were community plants. Fixed-dome and water-jacket floating-drum digesters represented 82 % and 8 % of installations surveyed, respectively. It was revealed that sanitation was the main motivational reason for people using biogas plants. Of the 50 plants, 22 (44 %) were functioning satisfactorily, 10 (20 %) were functioning partially, 14 (28 %) were not functioning, 2 (4 %) were abandoned, and the remaining 2 (4 %) were under construction. Reasons for non-functioning include non-availability of dung, breakdown of balloon gasholders, absence of maintenance services, lack of operational knowledge, and gas leakages and bad odour in toilet chambers of biolatrines. This paper recommends the development of a national biogas programme focussing on three major areas -- sanitation, energy, and agricultural fertilizer production; it further supports the development of standardized digester models. The founding of a national body or the establishment of a dedicated unit within an existing organization with the sole aim of coordinating and managing biogas dissemination in Ghana is proposed.

  14. The current status of fuel cell technology for mobile and stationary applications

    NARCIS (Netherlands)

    Bruijn, de F.A.

    2005-01-01

    This review of fuel cell technology gives an overview on the status of low and high temperature fuel cells, both on materials as well as on a system level. Their application in transport and the combined generation of heat and power is discussed in relation to their environmental benefits

  15. The Status of Information Technology in Iranian Hospital Libraries: A Comparative Study of Managers' Attitude

    Science.gov (United States)

    Isfandyari-Moghaddam, Alireza; Sedehi, Maryam; Dehghani, Mozhdeh; Nemati-Anaraki, Leila; Hasanzadeh-Dizaji, Elaheh

    2013-01-01

    Purpose: The purpose of this paper is to compare the attitude of the managers of libraries located at Iran, Tehran and Shahid Beheshti Medical Sciences Universities' training hospitals, on the status of information technology (IT) in the mentioned libraries. Design/methodology/approach: This study employed a researcher-made questionnaire. The…

  16. Quality Assurance Issues in Conducting Multi-Institutional Advanced Technology Clinical Trials

    International Nuclear Information System (INIS)

    Purdy, James A.

    2008-01-01

    The National Cancer Institute-sponsored Advanced Technology Quality Assurance (QA) Consortium, which consisted of the Image-Guided Therapy QA Center, Radiation Therapy Oncology Group, Radiological Physics Center, Quality Assurance Review Center, and Resource Center for Emerging Technologies, has pioneered the development of an infrastructure and QA method for advanced technology clinical trials that requires volumetric digital data submission of a protocol patient's treatment plan and verification data. In particular, the Image-Guided Therapy QA Center has nearly 15 years experience in facilitating QA review for Radiation Therapy Oncology Group advanced technology clinical trials. This QA process includes (1) a data integrity review for completeness of protocol required elements, the format of data, and possible data corruption, and recalculation of dose-volume histograms; (2) a review of compliance with target volume and organ-at-risk contours by study chairs; and (3) a review of dose prescription and dose heterogeneity compliance by the Radiation Therapy Oncology Group Headquarters Dosimetry Group or the Radiological Physics Center dosimetrists (for brachytherapy protocols). This report reviews the lessons learned and the QA challenges presented by the use of advanced treatment modalities in clinical trials requiring volumetric digital data submission

  17. THE IMPACT OF NEW INFORMATION AND COMMUNICATION TECHNOLOGIES IN PUBLIC INSTITUTIONS ACCOUNTING

    Directory of Open Access Journals (Sweden)

    Valentin Ioan UŞURELU

    2010-12-01

    Full Text Available The studied field has suffered continuous transformation, both in interaction with other scientific fields and in constituent sub-classes, for discovering and understanding more deeply the contemporary economic realities under the impact of major trends of world development. This paper aims to analyze the location and the effects of information and communication technologies within the public accounting in order to evaluate the effects of this element on accounting research, teaching and professional practice. In a comprehensive approach of public institutions accounting, new information and communication technologies represent a tool that facilitates the accounting function and realizes the connection between the transmitter and the receiver, both within and outside the organization, not just at the micro and macro economic level but also at the micro and macro social one. The advantages of recent progress of information and communication technologies are obvious for the organizations management. It highlights the developments and challenges represented by these new technologies for researchers and professionals in the idea of performing a broad and flexible view of public accounting enabling them to provide useful services for all categories of users of accounting information.

  18. Competitiveness of Educational Quality of the State College of Islamic Studies (STAIN) Pontianak after Status Change to the State Institute of Islamic Studies (IAIN) Pontianak

    Science.gov (United States)

    Misdah

    2016-01-01

    The purpose of this study was to determine: 1) Reality competition education quality of The State college of Islamic studies (STAIN) Pontianak after status change to the state institute of Islamic studies (IAIN) Pontianak, 2) Education quality management strategy of The State college of Islamic studies (STAIN) Pontianak after status change to the…

  19. Institut fuer Nukleare Entsorgungstechnik: Status report on research and development 1984

    International Nuclear Information System (INIS)

    1985-02-01

    Some of the main points tackled by the Institute during 1984 included: Testing the glassification technique for radioactive waste and design and construction of a glassification plant; examination of the properties of glass products, testing of incineration of waste containing plutonium; solidification of concentrate containing alpha particles; separation of actinides and fission products from MAW; examination of the release procedures of radio-nuclides from waste solidified with cement; development of long-term containers for the final storage of HAW glass products in salt; model calculations for thermo-mechanical processes and for release mechanisms in final storage. (RB) [de

  20. Activities of Nuclear Research Institute Rez in the area of hydrogen technologies

    International Nuclear Information System (INIS)

    Doucek, A.; Janik, L.; Misak, J.

    2010-01-01

    NRI is a research institution established in 1955. Nowadays, the Institute provides wide range of expertise and services for operators of the nuclear power plants in the Czech Republic and abroad, supports Czech central state institutions in the domains of strategic energy planning and development, management of radioactive waste (for the Ministry of Trade and Industry), provides independent expertise for the State Office of Nuclear Safety, performs activities in the area of exploitation of ionising radiation and irradiation services for basic and applied research, health service and industry, performs research and provides services for radioactive waste disposal, production of radiopharmaceuticals, education and training of experts and scientific specialists and performs many other activities. With the gradual changes in energy policy, hydrogen economy becomes one of the important topics related to nuclear energy. NRI is participating in the research and development in this area and as a member of the Czech Hydrogen Technology Platform is currently the leader in this area in the country. To promote hydrogen economy, NRI prepared and participated in several demonstration projects. Studies on production of hydrogen in current and future nuclear power plants are performed as well. (authors)

  1. Data Curation Program Development in U.S. Universities: The Georgia Institute of Technology Example

    Directory of Open Access Journals (Sweden)

    Tyler O. Walters

    2009-12-01

    Full Text Available The curation of scientific research data at U.S. universities is a story of enterprising individuals and of incremental progress. A small number of libraries and data centers who see the possibilities of becoming “digital information management centers” are taking entrepreneurial steps to extend beyond their traditional information assets and include managing scientific and scholarly research data. The Georgia Institute of Technology (GT has had a similar development path toward a data curation program based in its library. This paper will articulate GT’s program development, which the author offers as an experience common in U.S. universities. The main characteristic is a program devoid of top-level mandates and incentives, but rich with independent, “bottom-up” action. The paper will address program antecedents and context, inter-institutional partnerships that advance the library’s curation program, library organizational developments, partnerships with campus research communities, and a proposed model for curation program development. It concludes that despite the clear need for data curation put forth by researchers such as the groups of neuroscientists and bioscientists referenced in this paper, the university experience examined suggests that gathering resources for developing data curation programs at the institutional level is proving to be a quite onerous. However, and in spite of the challenges, some U.S. research universities are beginning to establish perceptible data curation programs.

  2. Analysis on the status of the application of satellite remote sensing technology to nuclear safeguards

    International Nuclear Information System (INIS)

    Tao Zhangsheng; Zhao Yingjun

    2008-01-01

    Based on the application status of satellite remote sensing technology to nuclear safeguards, advantage of satellite remote sensing technology is analyzed, main types of satellite image used in nuclear safeguards are elaborated and the main application of satellite images is regarded to detect, verify and monitor nuclear activities; verify additional protocol declaration and design information, support performing complementary access inspections; investigate alleged undeclared activities based on open source or the third party information. Application examples of satellite image in nuclear safeguards to analyze nuclear facilities by other countries, the ability of remote sensing technology in nuclear safeguards is discussed. (authors)

  3. Industrial and institutional restructuring of the Russian electricity sector: Status and issues

    International Nuclear Information System (INIS)

    Engoian, Alda

    2006-01-01

    The reform of the Russian electricity industry represents one of the largest and most technically complex post-Soviet era industrial restructurings. This paper presents the framework, status, and perspectives for the Russian electricity sector liberalisation. Uncertainties regarding the effective implementation of the reform are specifically examined. Ultimately the critical analysis of the reform questions the feasibility and adequacy of the recommended measures in the specific Russian context. Current theories fail to answer a fundamental issue, namely how to promote investment in an obsolete electrical infrastructure and, more generally, whether a pure free market model is compatible with physical constraints posed by the electricity sector. A careless deregulation of the Russian electricity system could hinder the country's stable and sustainable development, as its economy and the population's service have traditionally been closely linked to the electricity industry

  4. Industrial and institutional restructuring of the Russian electricity sector: status and issues

    International Nuclear Information System (INIS)

    Engoian, A.

    2006-01-01

    The reform of the Russian electricity industry represents one of the largest and most technically complex post-Soviet era industrial restructurings. This paper presents the framework, status, and perspectives for the Russian electricity sector liberalisation. Uncertainties regarding the effective implementation of the reform are specifically examined. Ultimately the critical analysis of the reform questions the feasibility and adequacy of the recommended measures in the specific Russian context. Current theories fail to answer a fundamental issue, namely how to promote investment in an obsolete electrical infrastructure and, more generally, whether a pure free market model is compatible with physical constraints posed by the electricity sector. A careless deregulation of the Russian electricity system could hinder the country's stable and sustainable development, as its economy and the population's service have traditionally been closely linked to the electricity industry. (author)

  5. Extent of Information and Communication Technology (ICT) Utilization for Students' Learning in Tertiary Institutions in Ondo State, Nigeria

    Science.gov (United States)

    Victor, Akinfolarin Akinwale; Bolanle, Rufai Rukayat

    2017-01-01

    This study investigated the extent of information and communication technology (ICT) utilization for students' learning in Ondo State tertiary institutions. The research design was descriptive survey. The target population comprises of all students in tertiary institutions of learning in Ondo State. A sample of two hundred (200) undergraduate…

  6. Crown Prince Regent's Resolution extending the authority of the Institute for Energy Technology regarding Kjeller and Halden

    International Nuclear Information System (INIS)

    1990-01-01

    This Resolution extends the authority of the Institute for Energy Technology (IFE) to own and operate nuclear reactors to 31 December 1999. The Institute owns and operates the JEEP II research reactor and the Halden Boiling Water Reactor, a research reactor established as an OECD-sponsored international project. (NEA) [fr

  7. Status of advanced technology and design for water cooled reactors: Light water reactors

    International Nuclear Information System (INIS)

    1988-10-01

    Water reactors represent a high level of performance and safety. They are mature technology and they will undoubtedly continue to be the main stream of nuclear power. There are substantial technological development programmes in Member States for further improving the technology and for the development of new concepts in water reactors. Therefore the establishment of an international forum for the exchange of information and stimulation of international co-operation in this field has emerged. In 1987 the IAEA established the International Working Group on Advanced Technologies for Water-Cooled Reactors (IWGATWR). Within the framework of IWGATWR the IAEA Technical Report on Status of Advanced Technology and Design for Water Cooled Reactors, Part I: Light Water Reactors and Part II: Heavy Water Reactors has been undertaken to document the major current activities and different trends of technological improvements and developments for future water reactors. Part I of the report dealing with LWRs has now been prepared and is based mainly on submissions from Member States. It is hoped that this part of the report, containing the status of advanced light water reactor design and technology of the year 1987 and early 1988 will be useful for disseminating information to Agency Member States and for stimulating international cooperation in this subject area. 93 refs, figs and tabs

  8. Electric Power Research Institute Environmental Control Technology Center: Report to the Steering Committee, June 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-06-01

    Operations and maintenance continued this month at the Electric Power Research Institute`s (EPRI`s) Environmental Control Technology Center (ECTC). Testing for the Hazardous Air Pollutant (HAP) test block was conducted using the 4.0 MW Spray Dryer Absorber System (SDA) and Pulse Jet Fabric Filter (PJFF) - Carbon Injection System. Investigations also continued across the B&W/CHX Heat Exchanger unit, while the 1.0 MW Selective Catalytic Reduction (SCR) unit remained idle this month in a cold-standby mode as monthly inspections were conducted. Pilot Testing Highlights Testing efforts in June were focused on the HAP test block and the Trace Elements Removal (TER) test block. Both programs were conducted on the 4.0 MW wet FGD pilot unit and PJFF unit. The HAP test block was temporarily concluded in June to further review the test data. This program began in March as part of the DOE Advanced Power Systems Program; the mission of this program is to accelerate the commercialization of affordable, high-efficiency, low-emission, coal-fueled electric generating technologies. The 1996 HAP test block focuses on three research areas, including: Catalytic oxidation of vapor-phase elemental mercury; Enhanced particulate-phase HAPs removal by electrostatic charging of liquid droplets; and Enhanced mercury removal by addition of additives to FGD process liquor. The TER test block is part of EPRI`s overall program to develop control technology options for reduction of trace element emissions. This experimental program investigates mercury removal and mercury speciation under different operating conditions.

  9. Estrogen receptor and progesterone receptor status of breast cancer patients of eastern India: A multi-institutional study.

    Science.gov (United States)

    Chatterjee, Koushik; Bhaumik, Gautam; Chattopadhyay, Bhargab

    2018-01-01

    There is a paucity of any significant data on the estrogen receptor (ER) and progesterone receptor (PR) status of breast cancer patients from the eastern part of India. This study aims to document the ER and PR status of breast cancer patients in the eastern Indian population, as catered by two premier tertiary care hospitals in Kolkata. All breast cancer patients registered between January 1, 2013 and December 31, 2015, in the Departments of Oncology, of IPGMER and SSKM Hospitals and R. G. Kar Medical College and Hospital, Kolkata, who had at least undergone a core biopsy or surgery, were analyzed retrospectively for documentation of their ER and PR status, using the 2010 American Society of Clinical Oncology/College of American Pathologists (ASCO/CAP) interpretation guidelines. Over a period of 3 years, a total of 927 patients were included for the study. A total of 825 (89%) patients had their ER and PR data available for evaluation. ER and PR positive was seen in 312 (37.82%) patients, ER and PR negative in 399 (48.36%) patients, ER positive and PR negative in 71 (8.6%) patients, and ER negative and PR positive results was found in 43 (5.21%) patients. This is the first multi-institutional documentation of ER and PR status from eastern India, having a modest number of patients and one of the earliest documentations using the latest ASCO/CAP interpretation guidelines. These findings resemble the data from the south and also reiterate the fact that majority of the Indian breast cancer patients are still ER and PR negative in spite of the changes in the interpretation guidelines.

  10. Status of decommissioning and waste management in the Nuclear Science Research Institute of JAEA

    International Nuclear Information System (INIS)

    Okoshi, Minoru; Yamashita, Toshiyuki

    2007-01-01

    The Nuclear Science Research Institute (NSRI) of JAEA has some experiences of the decommissioning of research reactors and research laboratories including a reprocessing test facility. In order to dismantle those facilities safely, we paid much attention for the radiological protection of radiation workers taking into consideration of characteristics of each facility, especially to protect internal exposures. As the results of decommissioning activities, several thousands tons of solid radioactive wastes were generated. In the near future, we will start the treatment of these stored wastes by a super compactor, metal melting furnace and non-metal waste melting furnace to gain high volume reduction and to prepare stable waste forms for final disposal. In Japan, the clearance system was established in 2005 by amending the Nuclear Regulatory Law. The NSRI plans to release very slightly contaminated concrete debris for recycling, which was generated from the replacement of reactor core of research reactor (JRR-3), according to the clearance system. (author)

  11. Business intelligence and data warehouse programs in higher education institutions: current status and recommendations for improvement

    Directory of Open Access Journals (Sweden)

    Olga Marinova

    2016-11-01

    Full Text Available The purpose of this article is to explore the current situation and the main challenges in existing Business Intelligence (BI and Data Warehouse (DW curricula. On the base of this research, certain recommendations for their improvement are made. At the same time, the paper gives concrete guidelines for the development of a clear and comprehensive graduate profile with knowledge, skills and social competence in the field of BI and DW. This is particularly beneficial for universities and other higher education institutions, that seek to offer courses with high quality content and tendencies, adequate to the latest education, in the concerned area. The paper is written within the Erasmus plus KA2 project “Developing the innovative methodology of teaching Business Informatics” (DIMBI, 2015-1-PL01-KA203-0016636.

  12. Evolution of technology convergence networks in Korea: Characteristics of temporal changes in R&D according to institution type

    Science.gov (United States)

    Choi, Jae Young; Jeong, Seongkyoon

    2018-01-01

    This study investigates the temporal changes in development of technology convergence networks by institution type, i.e., public research institute (PRI), university and industry. Using the co-classification of technological domains of patents, we identified technology convergence of Korean patents, which were filed at Korea Intellectual Properties Office (KIPO) from 1997 to 2011. We conducted a network analysis at the technology level to search for the key technology fields and frequent instances of technology convergence. The results show that technology convergence networks have grown significantly in the recent period regardless of the institution type. While industries started to conspicuously engage in technology convergence in the late 1990s, universities or PRIs did not do so until the mid-2000s. This discrepancy in the phase of technology convergence is attributed to the temporal difference in R&D stage (e.g., basic research and commercial product development). Our findings imply that corporal and governmental R&D management decision on promising technology fields will be more effective if the decision makers carefully consider the type of R&D entity in analyzing technological landscapes. PMID:29420574

  13. Evolution of technology convergence networks in Korea: Characteristics of temporal changes in R&D according to institution type.

    Science.gov (United States)

    Choi, Jae Young; Jeong, Seongkyoon; Jung, Jung-Kyu

    2018-01-01

    This study investigates the temporal changes in development of technology convergence networks by institution type, i.e., public research institute (PRI), university and industry. Using the co-classification of technological domains of patents, we identified technology convergence of Korean patents, which were filed at Korea Intellectual Properties Office (KIPO) from 1997 to 2011. We conducted a network analysis at the technology level to search for the key technology fields and frequent instances of technology convergence. The results show that technology convergence networks have grown significantly in the recent period regardless of the institution type. While industries started to conspicuously engage in technology convergence in the late 1990s, universities or PRIs did not do so until the mid-2000s. This discrepancy in the phase of technology convergence is attributed to the temporal difference in R&D stage (e.g., basic research and commercial product development). Our findings imply that corporal and governmental R&D management decision on promising technology fields will be more effective if the decision makers carefully consider the type of R&D entity in analyzing technological landscapes.

  14. Food Security, Institutional Framework and Technology: Examining the Nexus in Nigeria Using ARDL Approach.

    Science.gov (United States)

    Osabohien, Romanus; Osabuohien, Evans; Urhie, Ese

    2018-04-01

    Growth in agricultural science and technology is deemed essential for in-creasing agricultural output; reduce the vulnerability of rural poverty and in turn, food security. Food security and growth in agricultural output depends on technological usages, which enhances the pro-ductive capacity of the agricultural sector. The indicators of food security utilised in this study in-clude: dietary energy supply, average value of food production, prevalence of food inadequacy, among others. In this paper, we examined the level of technology and how investment in the agriculture and technology can improve technical know-how in Nigeria with a view to achieving food security. We carried out the analysis on how investment in technology and institutional framework can improve the level of food availability (a key component of food security) in Nigeria using econ-ometric technique based on Autoregressive Distribution Lag (ARDL) framework. The results showed, inter alia, that in Nigeria, there is a high level of food insecurity as a result of low attention on food production occasioned by the pervasive influence of oil that become the major export product. It was noted that the availability of arable land was one of the major factors to increase food production to solve the challenge of food insecurity. Thus, the efforts of reducing the rate of food insecurity are essential in this regards. This can also be achieved, among others, by active interactions between government and farmers, to make contribution to important planning issues that relate to food production in the country and above all, social protection policies should be geared or channelled to agricultural sector to protect farmers who are vulnerable to shocks and avert risks associated with agriculture.

  15. The development and current status of the technology of isotope and radiation in China

    Energy Technology Data Exchange (ETDEWEB)

    Zhifu, Luo [Dept. of Isotope, China Inst. of Atomic Energy, Beijing, BJ (China)

    1998-10-01

    The research and application of the technology of isotopes and radiation have been reviewed. Since the setup of the China`s first nuclear reactor at China Institute of Nuclear Energy in 1958, the technology of isotopes and radiation has been developed significantly. A research and application system has formed a considerable state. The technology of isotopes and radiation has been taken into the fields of industry, agriculture, medicine, and scientific research. The main achievements are on radiopharmaceuticals, radiation source, radiation process, and radioactive tracers. (author)

  16. Correlation between nutritional status and comprehensive physical performance measures among older adults with undernourishment in residential institutions

    Directory of Open Access Journals (Sweden)

    Singh DKA

    2014-08-01

    Full Text Available Devinder KA Singh,1 Zahara A Manaf,2 Noor Aini M Yusoff,3 Nur A Muhammad,2 Mei Fang Phan,1 Suzana Shahar2 1Physiotherapy Program, School of Rehabilitation Sciences, 2Nutrition and Dietetics Program, School of Health Care Sciences, Universiti Kebangsaan Malaysia, Kuala Lumpur, 3ASIA Metropolitan University, Cheras, Malaysia Purpose: The consequences of combined undernourishment and decreased physical ­performance in older adults are debilitating and increases cost of care. To date, the information regarding the association between nutritional status and physical performance does not provide a complete picture. Most studies used limited or self-reported measures to evaluate physical performance. The objective of this study was to examine the correlation between nutritional status and comprehensive physical performance measures among undernourished older adults who reside in residential institutions.Methods: Forty-seven older adults (26 males, 21 females aged ≥60 (69.23±8.63 years who were identified as undernourished from two residential institutions participated in this study. A battery of physical performance tests (10 m gait speed test, dominant hand grip strength test, timed five-repetition sit-to-stand test, ten step test, arm curl test, scratch test, and respiratory muscle strength test, biochemical profiles (serum albumin, hemoglobin, serum ferritin, and prealbumin levels, and falls risk using the short-form Physiological Profile Approach were performed. The Functional Ability Questionnaire and Geriatric Depression Scale were also administered.Results: The results demonstrated that generally older adults with undernourishment scored poorly on the physical performance tests, had depression, and a high risk of falls. Biochemical results demonstrated that 10.9% of the participants were anemic, 63% had hypoalbuminemia (<3.5 g/dL, and 21.7% were at risk of protein energy malnutrition with prealbumin level (100–170 mg/L. A significant

  17. The status of academic integrity amongst nursing students at a nursing education institution in the Western Cape.

    Science.gov (United States)

    Theart, Cecilia J; Smit, Ilze

    2012-06-20

    Honesty is regarded as a basic ethical value in all educational programmes, and academic integrity is of undisputed importance in educational environments. The literature reviewed revealed that academic dishonesty is wide-ranging and also encountered in the nursing education environment. This phenomenon is of concern to the nursing fraternity because of the proven positive correlation between unethical academic practices and future unethical professional behaviour. Limited research data regarding academic dishonesty at nursing education institutions in South Africa and this correlation motivated the present study. The purpose was to examine the status of academic integrity amongst nursing students at a nursing education institution in the Western Cape. Formulated objectives guided investigation of several variables which impact upon academic integrity, for example the incidence of and student perceptions around academic dishonesty. A quantitative, descriptive survey design was used, with a self-reported questionnaire (based on literature review and study objectives) designed to obtain information about academic dishonesty. Provision was also made for qualitative input from the respondents by including three open-ended questions. It was found that academic dishonesty was a reality at the nursing education institution where this study was done. Cheating associated with plagiarism and assignments was identified as the main problem area. An unacceptably high level of dishonesty in completion of practical records was also an area of concern. The main recommendations are development and implementation of a code of honour and implementation of comprehensive academic integrity policies at the nursing education institution, with practical measures aimed at combating cheating in tests and examinations.

  18. Research and Development of Technologies for Partitioning and Transmutation of Long-lived Nuclides in Japan - Status and Evaluation

    International Nuclear Information System (INIS)

    Sanae Aoki

    2003-01-01

    Japanese basic policy regarding disposal of high-level radioactive waste (HLW) is to solidify it into stabilized form, to store it for 30-50 years to be cooled, and to dispose of it deep to the underground (geological disposal). In Japan, reference to P and T technology for long-lived and other nuclides first appeared in the Long-term Programme for Nuclear Research, Development and Utilisation (or 'long-term nuclear programme') back in 1972. That programme noted the need for research and development in order to ensure effective processing of radioactive waste. The long-term nuclear programme issued in 1987 stated that P and T technology was very important from the viewpoint of recycling HLW and enhancing disposal efficiency. It also stated that systematic R and D would be carried out jointly by JAERI, the Power Reactor and Nuclear Fuel Development Corp. (PNC, now JNC) and others. The long-term nuclear programme issued in 1994 stated that each research institute would carry out basic studies on P and T technologies and evaluate each technology at some time in the mid- 1990's to determine how to proceed thereafter. Based on the evaluation schedule stated in this program, the AEC's Advisory Committee on Nuclear Fuel Cycle Back-end Policy investigated and considered matters concerning P and T technology for long-lived and other nuclides. In March 2000, the Committee issued a report entitled 'Research and Development of Technologies for Partitioning and Transmutation of Long-lived Nuclide Status and Evaluation Report'. A brief summary of this report is presented

  19. Scientists from all over the world attended the 'Frederic Joliot/Otto Hahn Summer School 2011' at the Karlsruhe Institute of Technology (KIT)

    International Nuclear Information System (INIS)

    Sanchez, Victor H.; Fischer, Ulrich

    2011-01-01

    The Karlsruhe Institute of Technology (KIT) and the Commissariat r leEnergie Atomique et Aux Energies Alternatives (CEA), Cadarache, alternate in organizing the annual 'Frederic Joliot/Otto Hahn Summer School.' This year's event, the 17th since its inception, was held in Karlsruhe, Germany on August 25 to September 3. Its topic was 'High-fidelity Modeling for Nuclear Reactors: Challenges and Prospects.' Here is a list of the subjects covered: - Status and perspectives of modeling and its role in design, operation, and safety. - Thermal hydraulics of nuclear reactors and simulation of 2 phase flows. - Structural mechanics, structure? fluid interaction, and seismic safety. - Advanced simulation in neutronics and reactor physics. - Progress in simulating fuel and materials behavior. - Multiphysics and uncertainty analysis methods. Experts from eight leading international research institutions and universities presented, and discussed with the 59 participants from 19 countries, the current state of the art and most recent development trends in the subjects listed above. (orig.)

  20. Present status of tandem accelerator analysis facility in National Institute for Environmental Studies

    Energy Technology Data Exchange (ETDEWEB)

    Kume, Hiroshi; Shibata, Yasuyuki; Tanaka, Atsushi; Yoneda, Minoru; Kumamoto, Yuichiro; Uehiro, Takashi; Morita, Masatoshi [National Inst. for Environmental Studies, Tsukuba, Ibaraki (Japan)

    1996-12-01

    In National Institute for Environmental Studies, two types of tandem accelerator analysis facilities were able to be installed in September, 1995. One is the accelerator mass analysis exclusive equipment with a 5 MV tandem accelerator, and the other is the high energy ion beam analyzer, in which the surface analysis system is connected to a 1 MV tandem accelerator, mainly used for PIXE measurement. The accelerator mass analyzer can be roughly divided into four parts, that is, ion source and negative ion injection system, accelerator, high energy analysis system, minute amount isotope beam line and control system. These parts are briefly explained. The test measurement of carbon isotope ratio was carried out, but the results dispersed and unsatisfactory. As for the ion beam analyzer, the surface analysis system (RBS400) of Charles Evans and Associates is combined with a 1 MV PELETRON tandem accelerator (3SDH) of NEC, and these are described. This analyzer also is not in the state that the steady operation can be carried out. Slight leak occurred in the ion source. The countermeasures to both cases are in progress. (K.I.)

  1. Present status of tandem accelerator in Japan Atomic Energy Research Institute

    Energy Technology Data Exchange (ETDEWEB)

    Yoshida, Tadashi; Kanda, Susumu; Takeuchi, Suehiro [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1996-12-01

    The tandem accelerator in Japan Atomic Energy Research Institute was made by NEC in USA. Since it is the accelerator of turning-up structure, it has large magnet at the high voltage terminal, and supplies electric power by driving a generator with large diameter shaft. The control is carried out by CAMUCK, and the electronic circuit is protected from the surging arising due to discharge. Since the experiment on full scale was begun, 14 years have elapsed, and at present, it became a very stable accelerator. As to the operation mode, the acceleration voltage is limited to below 17 MV. The operation voltage and the state of operation are shown. Recently, the troubles of chains originating in oil have occurred. The adjustment of the tandem accelerator requires more than one month. The adjustment is mainly related to the chains and shafts, and this is explained. The ion source used for the tandem accelerator at present is the negative ion source made by NEC. The installation of an ECR ion source is planned. The utilization of the tandem accelerator system is reported. (K.I.)

  2. UK Higher Education Institutions' Technology-Enhanced Learning Strategies from the Perspective of Disruptive Innovation

    Science.gov (United States)

    Flavin, Michael; Quintero, Valentina

    2018-01-01

    The publication of institutional strategies for learning, teaching and assessment in UK higher education is practically ubiquitous. Strategies for technology-enhanced learning are also widespread. This article examines 44 publicly available UK university strategies for technology-enhanced learning, aiming to assess the extent to which…

  3. The Design and Development of Educational Materials Using Microcomputer Technology in Distance Teaching Institutions: Some Issues for Consideration.

    Science.gov (United States)

    Yates, Christopher

    Perhaps the most significant development in microcomputer technology over the last two years has been the development of desktop publishing techniques. This technology promises to offer some significant advantages to institutions developing instructional materials in less developed countries, particularly in terms of control, cost effectiveness,…

  4. NATO Advanced Study Institute on Materials Issues for Generation IV Systems : Status, Open Questions and Challenges

    CERN Document Server

    Gorse, Dominique; Mazière, Dominique; Pontikis, Vassilis

    2008-01-01

    Global warming, shortage of low-cost oil resources and the increasing demand for energy are currently controlling the world's economic expansion while often opposing desires for sustainable and peaceful development. In this context, atomic energy satisfactorily fulfills the criteria of low carbon gas production and high overall yield. However, in the absence of industrial fast-breeders the use of nuclear fuel is not optimal, and the production of high activity waste materials is at a maximum. These are the principal reasons for the development of a new, fourth generation of nuclear reactors, minimizing the undesirable side-effects of current nuclear energy production technology while increasing yields by increasing operation temperatures and opening the way for the industrial production of hydrogen through the decomposition of water. The construction and use of such reactors is hindered by several factors, including performance limitations of known structural materials, particularly if the life of the project...

  5. Health status of radiation workers in an institute of nuclear research

    International Nuclear Information System (INIS)

    Popescu, F.; Paunescu, G.; Stroe, F.; Andrei, N.

    2000-01-01

    The aim of this study was the identification of the changes in health condition of workers from an institute of nuclear research. Thirty-five workers (25 male and 10 female) radiation exposed to low doses of ionizing radiation were admitted in the Radiopathology Centre Bucharest, after a selection performed during the annual check-up. The workers have had different professions: nuclear fuel processor, engineer laboratory technician, electrician, instrument technician. The time of exposure to ionizing radiation was between 6 to 25 years. Medical specialists in occupational health, dermatology, ophthalmology, O.R.L., endocrinology, haematology, neurology and psychology investigated them. The following lab tests were performed: haematological examination, biochemical examination, immunology tests, alergology skin tests, functional lung tests and cardiogram. No special problems concerning the exposure to ionizing radiation were found, but the following diseases were detected in some extent: neurasthenia, high blood pressure, ischemic heart disease, digestive system disorders, endocrinology disorders and anaemia. High blood pressure, ischemic heart disease and digestive system disorders were related with stress or job strain. Anaemia occurred in connection with gynaecological disorders. Some thyroid dysfunction appeared because of low dietary iodine content in the Sub-Carpathian region. The focus of the psychological exam was the identification of the effect of different factors (exogenous, endogenous or multidimensional) over a person, that could influence the psychological potential. The psychological exam reveals the following disturbances: asthenia, tiredness, chronic fatigue, psycho-emotional impairment, lapses of attention, anxiety. These disturbances may be in relation both with job strain (especially a substantial stress factor for nuclear fuel processor and engineer laboratory technician) and the syndrome of workplace. (author)

  6. Health status of radiation workers in an institute of nuclear research

    Energy Technology Data Exchange (ETDEWEB)

    Popescu, F.; Paunescu, G.; Stroe, F. [Inst. of Public Health, Bucharest (Romania); Andrei, N.

    2000-05-01

    The aim of this study was the identification of the changes in health condition of workers from an institute of nuclear research. Thirty-five workers (25 male and 10 female) radiation exposed to low doses of ionizing radiation were admitted in the Radiopathology Centre Bucharest, after a selection performed during the annual check-up. The workers have had different professions: nuclear fuel processor, engineer laboratory technician, electrician, instrument technician. The time of exposure to ionizing radiation was between 6 to 25 years. Medical specialists in occupational health, dermatology, ophthalmology, O.R.L., endocrinology, haematology, neurology and psychology investigated them. The following lab tests were performed: haematological examination, biochemical examination, immunology tests, alergology skin tests, functional lung tests and cardiogram. No special problems concerning the exposure to ionizing radiation were found, but the following diseases were detected in some extent: neurasthenia, high blood pressure, ischemic heart disease, digestive system disorders, endocrinology disorders and anaemia. High blood pressure, ischemic heart disease and digestive system disorders were related with stress or job strain. Anaemia occurred in connection with gynaecological disorders. Some thyroid dysfunction appeared because of low dietary iodine content in the Sub-Carpathian region. The focus of the psychological exam was the identification of the effect of different factors (exogenous, endogenous or multidimensional) over a person, that could influence the psychological potential. The psychological exam reveals the following disturbances: asthenia, tiredness, chronic fatigue, psycho-emotional impairment, lapses of attention, anxiety. These disturbances may be in relation both with job strain (especially a substantial stress factor for nuclear fuel processor and engineer laboratory technician) and the syndrome of workplace. (author)

  7. The Influence Of Policy Implementation From The Change Of Institutional Status Toward Quality Of Patient Service In Hospital

    Directory of Open Access Journals (Sweden)

    Dadang Kusnadi

    2015-08-01

    Full Text Available Abstract Fenomenon and comunity problem in goverment hospital management not aware to wont and need public. Silent safety and consumen satisfaction is fenomenon lack quallity care. Goal this research goal for analysis about influence of policy implementation of hospital change institution status to the quality of patien service in Hospital. Kind of reserch is the quantity desain on approach the eksplanatory survey research analysis regresi linier multipel with analysis method validitas product moment pearson exam and reliability exam is alpha cronbach technique to hypotesis exam is path analysis and statistic exam t. Datum transformation is Skala Likert with measurement the method succesive interval. The population one thausand seventh two person with sample technique stratified random sampling the instrument research is quesioner and interview patien on caunter imforman. The result of assuming research that it is anticipated that implementation of change policy of institution status of hospital X there is significant influence to quality of service of patient Y is 66.31 and the other factor e is 33.69. In the implementation factor is significant to positif influence to quality service is communication X1 is 049 human resources X2 is 025 disposition X3 is 032 and structure birocratic X4 is 033. The conculsion from four factor independen variable X is the implementation of policy to quality service patient Y to influence and can receive in knowledge. To concept the development in implementation of policy need culture job factor because every product policy to contac direct with the community as to basic public policy.

  8. SERC School on Computational Statistical Physics held at the Indian Institute of Technology

    CERN Document Server

    Ray, Purusattam

    2011-01-01

    The present book is an outcome of the SERC school on Computational Statistical Physics held at the Indian Institute of Technology, Guwahati, in December 2008. Numerical experimentation has played an extremely important role in statistical physics in recent years. Lectures given at the School covered a large number of topics of current and continuing interest. Based on lectures by active researchers in the field- Bikas Chakrabarti, S Chaplot, Deepak Dhar, Sanjay Kumar, Prabal Maiti, Sanjay Puri, Purusattam Ray, Sitangshu Santra and Subir Sarkar- the nine chapters comprising the book deal with topics that range from the fundamentals of the field, to problems and questions that are at the very forefront of current research. This book aims to expose the graduate student to the basic as well as advanced techniques in computational statistical physics. Following a general introduction to statistical mechanics and critical phenomena, the various chapters cover Monte Carlo and molecular dynamics simulation methodolog...

  9. The radiation accident at the Institute for Energy Technology, Kjeller, Norway, September 2, 1982

    International Nuclear Information System (INIS)

    Flatby, J.; Henriksten, T.; Hoest, H.

    1983-01-01

    On 2 September 1982 a radiation accident with overexposure of one person happened at the gamma irradiation plant at Institute for Energy Technology, Kjeller, Norway. This person died from the radiation injury 13 days later. When the personal film dosimeter was developed, blackening beyond measuring range was found. The main part of the report describes dosimetric methods based on electron spin resonance and thermoluminescence that were applied on things worn by the deceased during the accident. The dosimetric results are presented in the report along with a short description of the irradiation plant, the accident and the following medical treatment. The estimated whole-body dose was supposed to be 22.5 +- 2 Gy. (RF)

  10. Overview of LWR severe accident research activities at the Karlsruhe Institute of Technology

    International Nuclear Information System (INIS)

    Miassoedov, Alexei; Albrecht, Giancarlo; Foit, Jerzy-Jan; Jordan, Thomas; Steinbrück, Martin; Stuckert, Juri; Tromm, Walter

    2012-01-01

    The research activities in the light water reactor (LWR) severe accidents domain at Karlsruhe Institute of Technology (KIT) are concentrated on the in- and ex-vessel core melt behavior. The overall objective is to investigate the core melt scenarios from the beginning of core degradation to melt formation and relocation in the vessel, possible melt dispersion to the reactor cavity and to the containment, corium concrete interaction and corium coolability in the reactor cavity, and hydrogen behaviour in reactor systems. The results of the experiments contribute to a better understanding of the core melt sequences and thus improve safety of existing and, in the long-term, of future reactors by severe accident mitigation measures and by safety installations where required. This overview paper describes the experimental facilities used at KIT for severe accident research and gives an overview of the main directions and objectives of the R&D work. (author)

  11. Retrospect over past 25 years at Research Laboratory for Nuclear Reactors, Tokyo Institute of Technology

    International Nuclear Information System (INIS)

    Aoki, Shigebumi

    1983-01-01

    Research Laboratory for Nuclear Reactors, Tokyo Institute of Technology, was established on April 1, 1956, with the aims of the investigation on the peaceful use of nuclear energy and of the education of scientists and engineers in this field. This report reviews the history of the Laboratory during 25 years and traces the process of growth concerning research divisions, buildings, large-scale experimental facilities and the education in the graduate course for nuclear engineering. In addition, considering what the Laboratory has to be and what the future plan will be, it is mentioned that the research interest should be extended to the field of nuclear fusion reactor, especially the blanket engineering, as a long-term future project of the Research Laboratory. (author)

  12. Fiscal 1982 plans of works in National Institute of Radiological Sciences, Science and Technology Agency

    International Nuclear Information System (INIS)

    1982-01-01

    National Institute of Radiological Sciences, since its establishment in 1957, has engaged in the research and other works on the radiation injuries in human bodies, the medical utilization of radiation and the training and education of personnel in the field. The plans of works in fiscal 1982 in the NIRS are described. As special research works, there are the estimation of the degree of danger due to low level radiation for human bodies, environmental radiation exposure due to nuclear facilities, etc., the medical utilization of particle accelerators, and the biological effects of tritium in nuclear fusion reactor development. Ordinary research works include physics, chemistry, genetics, pharmacy, clinical research, etc. In other areas of activities are radiation risk evaluation, radioactivity investigation, technological aid, personnel education and training, and medical work. (Mori, K.)

  13. Breakthrough on technical and vocational education of Taiwan: Take Oriental Institute of Technology as an example

    Science.gov (United States)

    Chang, Horng-jinh; Wang, Whe-min

    2017-06-01

    Taiwan's economic strength has changed drastically in the past decade because of political and economic reasons; however, in order to cope with international environment, higher education must increase its breakthrough to meet the needs of enterprises. School curriculum also has to be timely changes and adjustments. This study will analyze school learning in several directions, use questionnaire to investigate students' learning stress, to find out where students' pressure lie. Also, outsourcing employers' satisfaction survey to find out what do enterprises wants to solve with the drop problem between school and enterprise. Taking Oriental Institute of Technology (OIT) as an example; over the past ten years, OIT has used overseas internships to help students overcome learning difficulties. Overseas practice courses include Penang Malaysia and Suzhou China had gained tremendous breakthrough.

  14. Programming Basics for Beginners. Experience of the Institute of Informatics at Tallinn University of Technology

    Directory of Open Access Journals (Sweden)

    Olga Mironova

    2017-11-01

    Full Text Available The present paper demonstrates the teaching approach in programming basics course for novices: schoolchildren of different ages and schoolteachers. This programming course was developed at the Institute of Informatics at Tallinn University of Technology in Tallinn, Estonia and it based on many years experience in teaching programming for non-IT first year students. The main aim of the chosen teaching approach in the course is to raise the motivation and keep the learners’ interest in programming field on the high level. The idea of developed teaching technique is the implementation of the visual programming before a serious textual coding. Furthermore, authors suggest readers some ways and methods to overcome learners’ difficulties in the first stage in a textual coding.

  15. Status of HgCdTe Barrier Infrared Detectors Grown by MOCVD in Military University of Technology

    Science.gov (United States)

    Kopytko, M.; Jóźwikowski, K.; Martyniuk, P.; Gawron, W.; Madejczyk, P.; Kowalewski, A.; Markowska, O.; Rogalski, A.; Rutkowski, J.

    2016-09-01

    In this paper we present the status of HgCdTe barrier detectors with an emphasis on technological progress in metalorganic chemical vapor deposition (MOCVD) growth achieved recently at the Institute of Applied Physics, Military University of Technology. It is shown that MOCVD technology is an excellent tool for HgCdTe barrier architecture growth with a wide range of composition, donor /acceptor doping, and without post-grown annealing. The device concept of a specific barrier bandgap architecture integrated with Auger-suppression is as a good solution for high-operating temperature infrared detectors. Analyzed devices show a high performance comparable with the state-of-the-art of HgCdTe photodiodes. Dark current densities are close to the values given by "Rule 07" and detectivities of non-immersed detectors are close to the value marked for HgCdTe photodiodes. Experimental data of long-wavelength infrared detector structures were confirmed by numerical simulations obtained by a commercially available software APSYS platform. A detailed analysis applied to explain dark current plots was made, taking into account Shockley-Read-Hall, Auger, and tunneling currents.

  16. The influence of institutional measures and technological proficiency on university teaching through digital platforms

    Directory of Open Access Journals (Sweden)

    Tirado, Ramón

    2012-06-01

    Full Text Available The objective of this study is to empirically test the theoretical model that explains the influence of primary and secondary factors on the integration of digital platforms in university teaching. A sample of 495 teachers from universities in Andalusia completed an online questionnaire that analysed the functions of usage, the digital materials used, the didactic and technological competence of the teaching staff, the support measures adopted by the institutions and the effect on teaching of platform use. Prior factor analysis and the application of the Amos program enabled us to develop a structural equation model to corroborate the indirect influence of the support measures and institutional recognition on teachers in their use of the platforms, and the direct influence of the teachers’ technological proficiency. Este estudio tiene como objetivo poner a prueba empíricamente el modelo teórico que explica la influencia de los factores de primer y segundo orden sobre la integración de las plataformas digitales en la docencia universitaria. Para ello, sobre una muestra de 495 profesores universitarios andaluces, se aplica un cuestionario online que analiza las funciones de uso, materiales digitales utilizados, competencia didáctica y tecnológica del profesorado, medidas de impulso institucionales, y efectos didácticos del uso. El análisis factorial previo y la aplicación del programa Amos permite la elaboración un modelo de ecuación estructural que corrobora la influencia indirecta de las medidas de apoyo y el reconocimiento institucional sobre los efectos didácticos del uso de plataformas, así como la influencia directa de la competencia tecnológica del profesorado.

  17. Information Technology Practices Amongst Dental Undergraduate Students at a Private Dental Institution in India

    Directory of Open Access Journals (Sweden)

    S. Kumar

    2009-09-01

    Full Text Available Objective: In dental and medical education, information and communication technology (ICT has been playing an important role and its use is rapidly increasing. In developing countries, however, information technology is still only available to a minority of health professionals. The present study aimed to assess the level of computer use among dental undergraduate students pursuing their career at a private dental institution in India.Materials and Methods: The study population comprised dental undergraduate students from first to fourth year pursuing their career in a private dental institution of India. Informationtechnology practices were assessed using a questionnaire that consisted of 14 questions.Results: In total, 247 students with an overall response rate of 66% participated in the study. Only 58.3% of the study population mentioned that they had access to computers.Students from preclinical years reported to be competent in IT skills more frequently than the clinical year students (chi square test, P=0.007. Compared to women, men used computers more regularly both for academic activities (P=0.082 and personal use (P=0.006.Similarly, students of clinical years used computers more than preclinical students for both purposes (academic activities, P=0.045; personal use, P=0.124.Conclusion: The present study revealed that computer literacy of Indian dental undergraduate students was comparable with students of other countries whereas accessibility of IT sources was poor. Expansion of computer-assisted learning which requires careful strategic planning, resource sharing, staff incentives, active promotion of multidisciplinary working, and effective quality control should be implemented.

  18. Applied radiation chemistry - the present status in the Institute for Nuclear Research Academia Sinica (INRAS)

    International Nuclear Information System (INIS)

    Nian-yun, L.

    1981-01-01

    The department of radiation chemistry in INRAS is one of the research centers of radiation chemistry in China. Since its establishment in 1958, basic theoretical and applied radiation chemistry have been extensively studied and promoted. In the field of applied radiation chemistry of polymers, radiation modification of polymeric systems is an important and active branch. Materials such as permselective membranes based on different polymer films have been prepared by means of radiation crosslinking and grafting. Superfine powdered wax, which may be used for the preparation of special lubricating grease of high quality, has been obtained via radiation degradation of PTFE (polytetrafluoroethylene). As for applied organic radiation chemistry, the main technological conditions of preparation of alkane sulfonic acid by radiation sulphoxidation of n-paraffin were optimized and the radiation sensitization effects of halogenated alkane and acetic anhydride on the indicated system were studied. The radiation stability of linear conjugated molecules and the related effects of intra- and intermolecular radiation protection were particularly investigated. These studies are described. (author)

  19. Electric Power Research Institute, Environmental Control Technology Center report to the steering committee. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    Operations and maintenance continued this month at the Electric Power Research Institute`s Environmental Control Technology Center. Testing on the 4.0 MW Pilot Wet FGD unit continued with the Pilot High Velocity FGD (PHV) and the Trace Element Removal (TER) test blocks. In the High Velocity test block, SO{sub 2} removal and mist eliminator carryover rates were investigated while operating the absorber unit with various spray nozzle types and vertical mist eliminator sections. During the Trace Element Removal test block, the mercury measurements and control studies involving the EPA Method 29 continued with testing of several impinger capture solutions, and the use of activated carbon injection across the Pulse-Jet Fabric Filter (PJFF) unit. The 4.0 MW Spray Dryer Absorber System was utilized this month in the TER test configuration to inject and transfer activated carbon to the PJFF bags for downstream mercury capture. Work also began in December to prepare the 0.4 MW Mini-Pilot Absorber system for receipt of the B and W Condensing Heat Exchanger (CHX) unit to be used in the 1996 DOE/PRDA testing. The 1.0 MW Cold-Side Selective Catalytic Reduction (SCR) unit remained in cold-standby this month.

  20. Social Innovation in Smart Tourism Ecosystems: How Technology and Institutions Shape Sustainable Value Co-Creation

    Directory of Open Access Journals (Sweden)

    Francesco Polese

    2018-01-01

    Full Text Available In the service era, markets are reconceptualized as systems of actors interconnected through networked relationships based on resources exchange and producing value co-creation. Two of the main contemporary service research theories, Service-dominant logic and Service science, propose different organizational layouts for producing and harmonizing value co-creation: Service ecosystems and smart service systems. However, these two models show some limitations. So, this work aims at drawing an integrated model, the so called Smart service ecosystem that can be applied to hypercompetitive and experience-based sectors. The model was tested in the tourism sector by using a case study methodology. Ten interviews were administered to key informants to analyze their perception about the main dimensions of the smart service ecosystems. By adopting a holistic view, the results obtained can allow the elaboration of a framework which pinpoints: (1 the main stakeholder groups (actors; (2 the kind of resources exchanged (resource integration; (3 the tools employed (technology; (4 the institution exchange among users (institutions. Applying the model obtained to the tourism sector this work explores the main element-steps for managing and optimizing value co-creation and sustainability in the long run and thus for transitioning from innovation to social innovation.

  1. Cultural background, gender, and institutional status have an effect on the evaluation of multi-disciplinary participatory action research.

    Science.gov (United States)

    Graef, Frieder; Sieber, Stefan

    2018-01-01

    Research and development increasingly apply participatory approaches that involve both stakeholders and scientists. This article presents an evaluation of German and Tanzanian researchers' perceptions during their activities as part of a large interdisciplinary research project in Tanzania. The project focused on prioritizing and implementing food-securing upgrading strategies across the components of rural food value chains. The participants involved during the course of the project were asked to provide feedback on 10 different research steps and to evaluate eight core features related to the functioning and potential shortcomings of the project. The study discriminated among evaluation differences linked to culture, gender, and institutional status. Perceptions differed between Tanzanian and German participants depending on the type and complexity of the participatory research steps undertaken and the intensity of stakeholder participation. There were differences in perception linked to gender and hierarchical status; however, those differences were not as concise and significant as those linked to nationality. These findings indicate that participatory action research of this nature requires more targeted strategies and planning tailored to the type of activity. Such planning would result in more efficient and satisfactory communication, close collaboration, and mutual feedback to avoid conflicts and other problems. We further conclude that it would be advisable to carefully incorporate training on these aspects into future project designs.

  2. Current status and prospect of radiation technology for the safety and security of food

    International Nuclear Information System (INIS)

    Byun, Myung Woo

    2009-01-01

    Since 1960, radiation technology (RT), which had been known as the method eliminating the biologically hazardous factors of the products in the food, medical, pharmaceutical and cosmetic industries, was comprehensively investigated. The safety of food irradiation has been throughout evaluated with scientific experiments. Recently, RT has been associated with other high technologies such as biotechnology and nanotechnology, and resulted in the innovative products. Through these fusion technology with RT, the new items with high functionality and value will be shown. But, until now, consumers' acceptance on radiation is still the problem to be solved for further development. To make the consumer correctly understand RT, the benefits and defects of RT should be informed and there should be the legislated policy for the industrialization of RT by government. Therefore, this review will introduce the current status of food irradiation in the world, the safety and national agreements and the recent results from radiation fusion technology, and suggest the further work

  3. Status of advanced technology and design for water cooled reactors: Heavy water reactors

    International Nuclear Information System (INIS)

    1989-07-01

    In 1987 the IAEA established the International Working Group on Advanced Technologies for Water-Cooled Reactors (IWGATWR). Within the framework of the IWGATWR the IAEA Technical Report on Status of Advanced Technology and Design for Water Cooled Reactors, Part I: Light Water Reactors and Part II: Heavy Water Reactors, has been undertaken to document the major current activities and trends of technological improvement and development for future water reactors. Part I of the report dealing with Light Water Reactors (LWRs) was published in 1988 (IAEA-TECDOC-479). Part II of the report covers Heavy Water Reactors (HWRs) and has now been prepared. This report is based largely upon submissions from Member States. It has been supplemented by material from the presentations at the IAEA Technical Committee and Workshop on Progress in Heavy Water Reactor Design and Technology held in Montreal, Canada, December 6-9, 1988. It is hoped that this part of the report, containing the status of advanced heavy water reactor technology up to 1988 and ongoing development programmes will aid in disseminating information to Member States and in stimulating international cooperation. Refs, figs and tabs

  4. Institute of Gas Technology. Annual report for the fiscal year ended August 31, 1992

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This annual report included: messages from the chairman and from the president of the IGT; updates on natural gas and the environment, technology transfer, energy, the sustaining member ship program (SMP), and education and information; a list of the board of trustees, executive committee and officers, members and contributers; and a brief of financial highlights if the IGT. The Institute's research and development programs included projects in environmental protection, site remediation, and clean power generation. Energy-related projects fell into three broad categories: gas distribution and operations, energy supply, and energy utilization. IGT is working toward bringing innovative processes and technologies developed in the laboratory into the marketplace. In the seven years since the SMP funds project began, more than sixty IGT Member Companies and International Associates have supported its efforts with their dues. For more than fifty years, IGT has fulfilled its charter missions of providing energy and environment related educational programs and services and disseminating technical and scientific information. These projects and the sources of their funding are described in detail in this report

  5. 32-element beta detector developed at the Institute of Electron Technology (ITE)

    Science.gov (United States)

    Wegrzecki, Maciej; Yakushev, Alexander; Bar, Jan; Budzyński, Tadeusz; Grabiec, Piotr; Kłos, Helena; Panas, Andrzej; Słysz, Wojciech; Stolarski, Maciej; Szmigiel, Dariusz; Wegrzecka, Iwona; Zaborowski, Michał

    2014-08-01

    The paper presents the design, technology and parameters of a new .silicon detector for detection of electrons (below named as beta detector) developed at the Institute of Electron Technology (ITE). The detector will be used for research on transactinide elements at the GSI Helmholtzzentrum für Schwerionenforschung GmbH, Darmstadt (GSI). The detector consists of a monolithic 32-element array with an active area diameter of 90 mm and a thickness of 0.9 mm. The starting material is a high-resistivity ν silicon wafer (5 kΩcm resistivity). 32 planar p+-ν junctions are formed by boron diffusion on the top side of the wafer. On the bottom side, an n+ region, which forms a common cathode, is formed on the entire surface by phosphorus diffusion. The array is mounted on a special epoxy-glass laminate substrate, copper-clad on both sides. Two model detectors have been fabricated and studied. Very good electrical parameters have been achieved. For the first array, with supply voltage VR = 20 V, the minimum dark current was 8 nA, the maximum dark current 97.1 nA, and the average dark current 25.1 nA. For the second array, it was 11.5 nA, 378.8 nA and 40.0 nA respectively.

  6. Longitudinal Patent Analysis for Nanoscale Science and Engineering: Country, Institution and Technology Field

    International Nuclear Information System (INIS)

    Huang Zan; Chen Hsinchun; Yip, Alan; Ng, Gavin; Guo Fei; Chen Zhikai; Roco, Mihail C.

    2003-01-01

    Nanoscale science and engineering (NSE) and related areas have seen rapid growth in recent years. The speed and scope of development in the field have made it essential for researchers to be informed on the progress across different laboratories, companies, industries and countries. In this project, we experimented with several analysis and visualization techniques on NSE-related United States patent documents to support various knowledge tasks. This paper presents results on the basic analysis of nanotechnology patents between 1976 and 2002, content map analysis and citation network analysis. The data have been obtained on individual countries, institutions and technology fields. The top 10 countries with the largest number of nanotechnology patents are the United States, Japan, France, the United Kingdom, Taiwan, Korea, the Netherlands, Switzerland, Italy and Australia. The fastest growth in the last 5 years has been in chemical and pharmaceutical fields, followed by semiconductor devices. The results demonstrate potential of information-based discovery and visualization technologies to capture knowledge regarding nanotechnology performance, transfer of knowledge and trends of development through analyzing the patent documents

  7. Progress of the decommissioning process of Musashi Institute of Technology reactor (4)

    International Nuclear Information System (INIS)

    Uchiyama, Takafumi; Tanzawa, Tomio; Mitsuhashi, Ishi; Morishima, Kayoko; Matsumoto, Tetsuo

    2012-01-01

    The research reactor of Tokyo City University Atomic Energy Research Laboratory (Musashi Institute of Technology reactor) is zirconium-moderated water-cooled solid homogeneous type (TRIGA-II type), and its maximum heat output is 100 kW. It got into the first critical state in January 1963, and since then, it has mainly contributed to education and training for upgrading nuclear engineers, radioactivation analysis and reactor physics, and medical researches, as the joint usage research facilities across Japan. Then, after a long-term suspension, the university submitted the file in 2004 to the Ministry of Education, Culture, Sports, Science and Technology on the dismantling for the purpose of facility abolishment. Through the procedure of submitting a decommissioning plan, it was approved. Furthermore, in order to perform the function stop of the disposal facilities of liquid waste, application for change authorization for the decommissioning plan was submitted and approved. Regarding the progress of the decommissioning plan, the dismantling and removal of waste facilities for liquid waste and solid waste was carried out in FY2011 without any trouble. This paper explains this progress and future work plans. (A.O.)

  8. Repository National Institutes for Quantum and Radiological Science and Technology (QST)

    International Nuclear Information System (INIS)

    Maeda, Takamasa

    2016-01-01

    This paper introduces the facilities of National Institute of Radiological Sciences (NIRS). It was established as an auxiliary organ of the Science and Technology Agency in 1957. In April 2016, it became a comprehensive radiology research and development department of the Quantum Science and Technology Research Organization, and has been performing 'research for medical use of radiation' and 'research for radiation safety and emergency radiation medical care' as the two pillars of research. The laboratory hospital is a sole monotechnic radiation hospital in Japan specializing in radiotherapy. Heavy particle accelerator for medical use has been constructed, and advancement of heavy particle therapy using rotating gantry is expected. At the clinical nuclear medicine department, research facilities involved in molecular imaging are cyclotron building, positron building, imaging diagnostic building, and exploratory research building, and they are equipped with are three large and small cyclotrons, clinical PET device, animal-specialized PET device, 7-tesla MRI. The nuclear medicine laboratory is equipped with four PET/CT devices, one PET device, and one gamma camera, and performing tumor examination and clinical research on psychiatric and neurological diseases. (A.O.)

  9. Longitudinal Patent Analysis for Nanoscale Science and Engineering: Country, Institution and Technology Field

    Science.gov (United States)

    Huang, Zan; Chen, Hsinchun; Yip, Alan; Ng, Gavin; Guo, Fei; Chen, Zhi-Kai; Roco, Mihail C.

    2003-08-01

    Nanoscale science and engineering (NSE) and related areas have seen rapid growth in recent years. The speed and scope of development in the field have made it essential for researchers to be informed on the progress across different laboratories, companies, industries and countries. In this project, we experimented with several analysis and visualization techniques on NSE-related United States patent documents to support various knowledge tasks. This paper presents results on the basic analysis of nanotechnology patents between 1976 and 2002, content map analysis and citation network analysis. The data have been obtained on individual countries, institutions and technology fields. The top 10 countries with the largest number of nanotechnology patents are the United States, Japan, France, the United Kingdom, Taiwan, Korea, the Netherlands, Switzerland, Italy and Australia. The fastest growth in the last 5 years has been in chemical and pharmaceutical fields, followed by semiconductor devices. The results demonstrate potential of information-based discovery and visualization technologies to capture knowledge regarding nanotechnology performance, transfer of knowledge and trends of development through analyzing the patent documents.

  10. Present status and problems of remote systems technology in nuclear industry

    Energy Technology Data Exchange (ETDEWEB)

    1989-02-01

    This reports the activities of Special Committee on Remote Systems Technology, Atomic Energy Society of Japan, during the period from Oct. 1984 to Sep. 1988. The Committee studied and reviewed the present status and problems of remote operation and maintenance in various fields of nuclear industry. Reported items are; reactor operation, reprocessing, nuclear fusion and decommissioning. It also reviews robotics and remote systems tehcnology applied to space and marine development.

  11. Present status and problems of remote systems technology in nuclear industry

    International Nuclear Information System (INIS)

    1989-01-01

    This reports the activities of Special Committee on Remote Systems Technology, Atomic Energy Society of Japan, during the period from Oct. 1984 to Sep. 1988. The Committee studied and reviewed the present status and problems of remote operation and maintenance in various fields of nuclear industry. Reported items are; reactor operation, reprocessing, nuclear fusion and decommissioning. It also reviews robotics and remote systems tehcnology applied to space and marine development. (author)

  12. Electronic Nose Technology to Measure Soil Microbial Activity and Classify Soil Metabolic Status

    OpenAIRE

    Fabrizio De Cesare; Elena Di Mattia; Simone Pantalei; Emiliano Zampetti; Vittorio Vinciguerra; Antonella Macagnano

    2011-01-01

    The electronic nose (E-nose) is a sensing technology that has been widely used to monitor environments in the last decade. In the present study, the capability of an E-nose, in combination with biochemical and microbiological techniques, of both detecting the microbial activity and estimating the metabolic status of soil ecosystems, was tested by measuring on one side respiration, enzyme activities and growth of bacteria in natural but simplified soil ecosystems over 23 days of incubation thr...

  13. Comparative assessment of agricultural technology generating practices in universities and research institutes in north central zone of Nigeria

    Directory of Open Access Journals (Sweden)

    Gbolagade Benjamin Adesiji

    2017-06-01

    Full Text Available To understand the technology generating practices among universities and research institutes in north central zone of Nigeria, this study examined sources of funds for technology generating activities, compared agro-technology generating practices and identified constraining factors hindering technology generating practices. One hundred and fifty-two academic staff were randomly selected from universities and one hundred and thirty-six respondents were drawn from research institutes. Validated questionnaires with reliability coefficient of r = 0.92 were used to elicit data. Data were analyzed using descriptive statistics, Likert-scale, T-test and Factor analysis. Majority (93.4% of universities’ respondents used their personal funds to generate new technology compared to their counterparts in research institutes. The most widely employed mechanism for generating agricultural technologies was joint radio programmes (mean = 3.38 while the least was biotechnology (mean = 2.57. Major areas of differences in technology generation between the two institutions were the physical distance (t = 13.54; P < 0.05, farmers participation in field research trials (t = 8.50; P < 0.05, farmers co-finance of adaptive research trials (t = 3.77; P < 0.05 and adequate research facilities and incentives to workers (t = 2.05; P < 0.05. Factors constraining technology generation for universities were poor access to knowledge and information on new innovation (r = 0.815 while for research institutes it was limited physical resources (ICT, Telephone (r = 0.801. It was recommended therefore that respondents should look into options of writing alternate fund proposals and submitting to a wider range of funding bodies. Governance of innovation could be strengthened through the formation of a formal technological linkage advisory council.

  14. Collaboration Among Institutions to Bring Geospatial Technology to an Underserved Rural Region

    Science.gov (United States)

    Johnson, T.

    2012-12-01

    The University of Maine at Machias and Washington County Community College, the two smallest and most remote public institutions in Maine, provide important education and workforce development services in a rural and economically-challenged region. Through an innovative collaboration supported by the National Science Foundation, the two institutions have developed geospatial technology (GST) programs designed to meet the specific workforce needs of the region, affording students with the opportunity to pursue degrees, certificates and minors. Prior to this effort, neither school had the resources to maintain a GST laboratory or to offer courses consistently. The region had almost no GST capacity with which to manage critical environmental resources and grapple with economic, public safety, and public health challenges. Several statewide studies had shown a growing need for more GST technicians and training for incumbent workers. The new programs are designed to produce a small number of specialist technicians with associate's degrees and a large number of ancillary users with significant GST expertise from courses, certificates or minors. Course content is shaped by workforce research in Maine and elsewhere, and all courses are offered in either blended, online or short-term intensive formats to provide access to incumbent workers and extend the geographic reach of the programs. Through the university's Geographic Information Systems (GIS) Service Center, students from both institutions engage in real-world projects, and are linked with employers via internships. This has the added plus of providing low-cost and no-cost GIS services to area clients, generating demand. Many of these projects and internships lead to work for graduates, even through the economic downturn. By creating courses that serve multiple audiences, each contributing a small number to the total enrollment, the programs constitute a sustainable model that serves the growing needs of the region

  15. National Science and Technology Institute for Translational Medicine (INCT-TM): advancing the field of translational medicine and mental health.

    Science.gov (United States)

    Hallak, Jaime E C; Crippa, José Alexandre S; Quevedo, João; Roesler, Rafael; Schröder, Nadja; Nardi, Antonio Egidio; Kapczinski, Flávio

    2010-03-01

    Translational medicine has been described as the integrated application of innovative pharmacology tools, biomarkers, clinical methods, clinical technologies and study designs to improve the understanding of medical disorders. In medicine, translational research offers an opportunity for applying the findings obtained from basic research to every-day clinical applications. The National Science and Technology Institute for Translational Medicine is comprised of six member institutions (Universidade Federal do Rio Grande do Sul, Universidade de São Paulo-Ribeirão Preto, Universidade Federal do Rio de Janeiro, Pontifícia Universidade Católica do Rio Grande do Sul, Universidade Estadual de Santa Catarina and a core facility that serves all centers). The objectives of the project are divided into four areas: Institutional, Research, Human Resources and Technology for the Community and Productive Sector. In this manuscript, we describe some of the approaches used to attain the main objectives of the National Science and Technology Institute for Translational Medicine, which include the development of 1) animal models for bipolar disorder; 2) strategies to investigate neurobehavioral function and cognitive dysfunction associated with brain disorders; 3) experimental models of brain function and behavior, neuropsychiatric disorders, cell proliferation, and cancer; 4) Simulated Public Speaking and 5) Virtual reality simulation for inducing panic disorder and agoraphobia. The main focus of the National Science and Technology Institute for Translational Medicine is the development of more useful methods that allow for a better application of basic research-based knowledge to the medical field.

  16. Biomedical and health informatics education and research at the Information Technology Institute in Egypt.

    Science.gov (United States)

    Hussein, R; Khalifa, A

    2011-01-01

    During the last decade, Egypt has experienced a revolution in the field of Information and Communication Technology (ICT) that has had a corresponding impact on the field of healthcare. Since 1993, the Information Technology Institute (ITI) has been leading the development of the Information Technology (IT) professional training and education in Egypt to produce top quality IT professionals who are considered now the backbone of the IT revolution in Egypt. For the past five years, ITI has been adopting the objective of building high caliber health professionals who can effectively serve the ever-growing information society. Academic links have been established with internationally renowned universities, e.g., Oregon Health and Science University (OHSU) in US, University of Leipzig in Germany, in addition those with the Egyptian Fellowship Board in order to enrich ITI Medical Informatics Education and Research. The ITI Biomedical and Health Informatics (BMHI) education and training programs target fresh graduates as well as life-long learners. Therefore, the program's learning objectives are framed within the context of the four specialization tracks: Healthcare Management (HCM), Biomedical Informatics Research (BMIR), Bioinformatics Professional (BIP), and Healthcare Professional (HCP). The ITI BMHI research projects tackle a wide-range of current challenges in this field, such as knowledge management in healthcare, providing tele-consultation services for diagnosis and treatment of infectious diseases for underserved regions in Egypt, and exploring the cultural and educational aspects of Nanoinformatics. Since 2006, ITI has been positively contributing to develop the discipline of BMHI in Egypt in order to support improved healthcare services.

  17. Advances for prosthetic technology from historical perspective to current status to future application

    CERN Document Server

    LeMoyne, Robert

    2016-01-01

    This book focuses on the advances in transtibial prosthetic technology and targets research in the evolution of the powered prosthesis such as the BiOM, which was derived from considerable research and development at the Massachusetts Institute of Technology. The concept of the book spans the historical evolution of prosthetic applications from passive to new and futuristic robotic prosthetic technologies.  The author describes the reasons for amputation, surgical procedures, and an historical perspective of the prosthesis for the lower limb. He also addresses the phases and sub-phases of gait and compensatory mechanisms arising for a transtibial prosthesis and links the compensatory mechanisms to long-term morbidities.  The general technologies for gait analysis central to prosthetic design and the inherent biomechanics foundations for analysis are also explored.  The book reports on recent-past to current-term applications with passive elastic prostheses.  The core of the book deals with futuristic robo...

  18. Production technology readiness assessment of surfactant in the research center for Chemistry-Indonesian Institute of Sciences

    Science.gov (United States)

    Setiawan, Arief Ameir Rahman; Sulaswatty, Anny

    2017-11-01

    The common problem faced by the institution working on research, innovation and technology development is lack of quantitative measures to determine the technology readiness of research. No common communication language between R & D Institutions and industry about the level of preparedness of a research resulting a barrier to technology diffusion interaction. This lack of connection between R & D institutes with industry may lead to "sluggishness" occurs in innovating. For such circumstance, assessing technology readiness of research is very important. One of wide spread methods for the assessment is Technology Readiness Level (TRL, also known as Technometer), which is introduced by NASA (National Aeronautics and Space Administration). TRL is a general guide that provides an overview of maturity level of a technology. This study aims to identify and demonstrate the implementation of TRL to assess a number of surfactant researches in the Research Center for Chemistry, Indonesian Institute of Sciences. According to the assessment, it has been obtained the surfactant recommended for further development towards commercialization of R & D results, i.e. Glycerol Mono Stearate (GMS), which has reached the level of TRL 7.

  19. Conventional engine technology. Volume 1: Status of OTTO cycle engine technology

    Science.gov (United States)

    Dowdy, M. W.

    1981-01-01

    Federally-mandated emissions standards have led to major changes in automotive technology during the last decade. Efforts to satisfy the new standards were directed more toward the use of add-on devices, such as catalytic converters, turbochargers, and improved fuel metering, than toward complete engine redesign. The resulting changes are described and the improvement brought about by them in fuel economy and emissions levels are fully documented. Four specific categories of gasoline-powered internal combustion engines are covered, including subsystem and total engine development. Also included are the results of fuel economy and exhaust emissions tests performed on representative vehicles from each category.

  20. Current status and future development of modular high temperature gas cooled reactor technology

    International Nuclear Information System (INIS)

    2001-02-01

    This report includes an examination of the international activities with regard to the development of the modular HTGR coupled to a gas turbine. The most significant of these gas turbine programmes include the pebble bed modular reactor (PBMR) being designed by ESKOM of South Africa and British Nuclear Fuels plc. (BNFL) of the United Kingdom, and the gas turbine-modular helium reactor (GT-MHR) by a consortium of General Atomics of the United States of America, MINATOM of the Russian Federation, Framatome of France and Fuji Electric of Japan. Details of the design, economics and plans for these plants are provided in Chapters 3 and 4, respectively. Test reactors to evaluate the safety and general performance of the HTGR and to support research and development activities including electricity generation via the gas turbine and validation of high temperature process heat applications are being commissioned in Japan and China. Construction of the high temperature engineering test reactor (HTTR) by the Japan Atomic Energy Research Institute (JAERI) at its Oarai Research Establishment has been completed with the plant currently in the low power physics testing phase of commissioning. Construction of the high temperature reactor (HTR-10) by the Institute of Nuclear Energy Technology (INET) in Beijing, China, is nearly complete with initial criticality expected in 2000. Chapter 5 provides a discussion of purpose, status and testing programmes for these two plants. In addition to the activities related to the above mentioned plants, Member States of the IWGGCR continue to support research associated with HTGR safety and performance as well as development of alternative designs for commercial applications. These activities are being addressed by national energy institutes and, in some projects, private industry, within China, France, Germany, Indonesia, Japan, the Netherlands, the Russian Federation, South Africa, United Kingdom and the USA. Chapter 6 includes details

  1. The report of joint research over 20 years of the Bulgarian Academy of Sciences and Hiroshima Institute of Technology

    OpenAIRE

    Tanaka,Takeshi; Vutova,Katia

    2014-01-01

    The Department of Electronics and Computer Engineering, Hiroshima Institute of Technology (EC-HIT) started the international joint research with the Laboratory “Physical Problems of Electron Beam technologies” of the Institute of Electronics, Bulgarian Academy of Sciences (IE-BAS) from 1994. 20 papers, included a book chapter, were published by implementing the international joint research under 5 Agreements for Academic Cooperation and Exchange between HIT and IEBAS. Our international joint ...

  2. The Use of ICTs by Teachers at the Technological Superior Institute of Administrative and Comercial Professional Formation at Ecuador

    Directory of Open Access Journals (Sweden)

    Lic. Emma Zulay Delgado Saeteros

    2016-02-01

    Full Text Available In the scenarios of higher education in Ecuador, concepts related to teaching and pedagogical practices are a challenge for science teaching, and stand as the need to address the change within the institutions by the rethinking of being and educational work. The teaching-learning process in teaching must be activated from the use of ICTs. The authors reflect about the behavior of this criterion in the Technological Institute of Vocational and Business Administration (ITFPAC in Ecuador

  3. Planning ten years ahead a multidisciplinary nuclear research technology institute: the case of IPEN

    International Nuclear Information System (INIS)

    Sousa, Willy Hoppe de

    2011-01-01

    Planning is always a problem in government organizations whose mission involves the development of R and D activities. The current issue of the Institute of Energy and Nuclear Research (IPEN), one of the institutes comprising the National Nuclear Energy Commission (CNEN), is to plan the reconciling the long-term ramifications of a large project whose funding is primarily derived from the budget Union with the R and D agenda of IPEN which is largely driven and funded by science and technology funding agencies. This paper aims at reporting the results of one of the stages of the work developed by IPEN to deal with this problem. In mid-2010, top management of IPEN approved the implementation of a participatory planning effort with the following guidelines: (1) focus on two of the three finalist functions of IPEN - Research and Development (R and D) and Products and Services (P and S), (2) results orientation with a time horizon of 10 years, (3) incorporation of the unfolding of a large project in this planning effort (this project has its own planning) and (4) the source of information of the planning process would be the teams involved in the research lines and projects (LPP's) and the lines of production activities (LAP's) - the lowest grouping level in the current planning framework of IPEN. The planning process developed was based on an adaptation of a technique known as technology roadmapping. The data were collected through a web questionnaire. At the end of the data collection in mid- December 2010 89 LPP's and LAP 28's responses were recorded. For the purposes of this article the following groups of information related to R and D finalist function are presented: Where are we now?: (1) Profile of the current team; (2) Motivation of research and (3) Sources used for identification R and D goals. How can we get there?: (4) Profile of research partners, and (5) Profile of the necessary changes. Where do we want to go?: (6) Classification of results by areas and (7

  4. Planning ten years ahead a multidisciplinary nuclear research technology institute: the case of IPEN

    Energy Technology Data Exchange (ETDEWEB)

    Sousa, Willy Hoppe de, E-mail: whsousa@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil). Gerencia de Planos e Programas

    2011-07-01

    Planning is always a problem in government organizations whose mission involves the development of R and D activities. The current issue of the Institute of Energy and Nuclear Research (IPEN), one of the institutes comprising the National Nuclear Energy Commission (CNEN), is to plan the reconciling the long-term ramifications of a large project whose funding is primarily derived from the budget Union with the R and D agenda of IPEN which is largely driven and funded by science and technology funding agencies. This paper aims at reporting the results of one of the stages of the work developed by IPEN to deal with this problem. In mid-2010, top management of IPEN approved the implementation of a participatory planning effort with the following guidelines: (1) focus on two of the three finalist functions of IPEN - Research and Development (R and D) and Products and Services (P and S), (2) results orientation with a time horizon of 10 years, (3) incorporation of the unfolding of a large project in this planning effort (this project has its own planning) and (4) the source of information of the planning process would be the teams involved in the research lines and projects (LPP's) and the lines of production activities (LAP's) - the lowest grouping level in the current planning framework of IPEN. The planning process developed was based on an adaptation of a technique known as technology roadmapping. The data were collected through a web questionnaire. At the end of the data collection in mid- December 2010 89 LPP's and LAP 28's responses were recorded. For the purposes of this article the following groups of information related to R and D finalist function are presented: Where are we now?: (1) Profile of the current team; (2) Motivation of research and (3) Sources used for identification R and D goals. How can we get there?: (4) Profile of research partners, and (5) Profile of the necessary changes. Where do we want to go?: (6) Classification of

  5. Current status of 700 MWe class PHWR NSSS design and engineering technology

    International Nuclear Information System (INIS)

    Park, Tae Keun; Suh, Sung Ki

    1996-06-01

    The capability of NSSS design and engineering technology of KAERI for 700 MWe class PHWR (CANDU 6) as of 1996 March 30 is comprehensively summarized in this report. The design and engineering capability of KAERI which have been gained during the implementation of Wolsung 2, 3 and 4 project are assessed, and showed with tangible scale. The status of Technology Transfer Materials received from Atomic Energy of Canada Limited under the Technology Transfer Agreement (TTA) which is effective simultaneously to Wolsung 3 and 4 contract, is also given in this report. The division of responsibility (DOR) of KAERI for Wolsung 2 and Wolsung 3 and 4 contract is also given, and expansion of DOR from Wolsung 2 contract to Wolsung 3 and 4 is presented. 3 refs. (Author)

  6. Sentinel node status prediction by four statistical models: results from a large bi-institutional series (n = 1132).

    Science.gov (United States)

    Mocellin, Simone; Thompson, John F; Pasquali, Sandro; Montesco, Maria C; Pilati, Pierluigi; Nitti, Donato; Saw, Robyn P; Scolyer, Richard A; Stretch, Jonathan R; Rossi, Carlo R

    2009-12-01

    To improve selection for sentinel node (SN) biopsy (SNB) in patients with cutaneous melanoma using statistical models predicting SN status. About 80% of patients currently undergoing SNB are node negative. In the absence of conclusive evidence of a SNBassociated survival benefit, these patients may be over-treated. Here, we tested the efficiency of 4 different models in predicting SN status. The clinicopathologic data (age, gender, tumor thickness, Clark level, regression, ulceration, histologic subtype, and mitotic index) of 1132 melanoma patients who had undergone SNB at institutions in Italy and Australia were analyzed. Logistic regression, classification tree, random forest, and support vector machine models were fitted to the data. The predictive models were built with the aim of maximizing the negative predictive value (NPV) and reducing the rate of SNB procedures though minimizing the error rate. After cross-validation logistic regression, classification tree, random forest, and support vector machine predictive models obtained clinically relevant NPV (93.6%, 94.0%, 97.1%, and 93.0%, respectively), SNB reduction (27.5%, 29.8%, 18.2%, and 30.1%, respectively), and error rates (1.8%, 1.8%, 0.5%, and 2.1%, respectively). Using commonly available clinicopathologic variables, predictive models can preoperatively identify a proportion of patients ( approximately 25%) who might be spared SNB, with an acceptable (1%-2%) error. If validated in large prospective series, these models might be implemented in the clinical setting for improved patient selection, which ultimately would lead to better quality of life for patients and optimization of resource allocation for the health care system.

  7. Characteristics of the Institute of Technology 'Prof. Jorge A. Sabato'; Caracteristicas del Instituto de Tecnologia 'Prof. Jorga A. Sabato'

    Energy Technology Data Exchange (ETDEWEB)

    Galvele, Jose R [Comision Nacional de Energia Atomica, General San Martin (Argentina). Centro Atomico Constituyentes

    2001-07-01

    A historical survey is made of the educational and training activities in metallurgy and material sciences carried out by the CNEA since 1962, that were the origin of the 'Prof. Jorge A. Sabato' Institute. Today the Institute, created by the CNEA in association with the National University of General San Martin, is preparing Engineers in Material Sciences and Masters and Ph. D. in Material Sciences and Technology (Mention in Physics and Material). The curricula of the studies are described in detail. The Information Center annexed to the Institute is also described.

  8. Why Nations Fail? Daron Acemoglu: The Role of Inclusive and Extractive Institutions on Shaping Technological Change, Innovation, and Prosperity

    Directory of Open Access Journals (Sweden)

    Shlair Abdulkhaleq Al-Zanganee

    2015-12-01

    Full Text Available Professor Daron Acemoglu argues in his book Why Nations Fail? The Origin of Power, Prosperity, and Poverty (2012, coauthored with James A. Robinson that the role played by inclusive and extractive institution is the main reason behind the huge gap in the standards of living between poor and rich nations. Such institutions emerge within the contextual political, economic, and social environment and they shape technological progress and innovation. By taking the United States as an example, Acemoglu argues that extractive institutions are enabling both economic and political inequality and contribute to the negative consequences of such types of inequality.

  9. Human resource development program for nuclear safety and security in Tokyo Institute of Technology

    International Nuclear Information System (INIS)

    Han, Chi Young; Sagara, Hiroshi; Nagasaka, Hideo

    2014-01-01

    The Academy for Global Nuclear Safety and Security Agent was established at Tokyo Institute of Technology in 2011, to develop global nuclear human resources in the field of 3S (Safety, Security, and Safeguards) as a Program for Leading Graduate Schools supported by MEXT (Ministry of Education, Culture, Sports, Science and Technology). New courses of nuclear safety and security were developed in addition to the existing nuclear engineering program; 1) Environmental Dynamics of Radioactive Nuclides; Numerical simulation of the environmental dispersion of radioactive materials released from hypothetical nuclear accidents and evaluation of the public exposure are performed, by using a computer-based emergency response system, to have students predict the environmental dispersion of radionuclides and radiological consequence by nuclear accidents. 2) Measurement of Environmental Radiation; Students acquire hands-on experiences measuring environmental radiation contamination caused by the nuclear accident in Fukushima with multiple types of radiation detectors. Environmental samples are collected and analyzed for isotope identification and its spatial distribution. 3) Simulation of Severe Nuclear Accidents; The evaluation results of Fukushima accident progression are discussed as well as typical sever accidents that threaten the integrity of reactor vessel. Students simulate BWR (Boiling Water Cooled Reactor) transients, design basis accidents, and severe accidents by using simulators. 4) Nuclear Security Training; Design of physical protection systems, its fundamental physics, and regulatory frameworks are covered and students gain the practical experiences by use of intrusion detection systems at JAEA (Japan Atomic Energy Agency), and by numerical simulation of hydro-dynamics of structure material and nuclear material criticality at the university. (author)

  10. Cornell Fuel Cell Institute: Materials Discovery to Enable Fuel Cell Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Abruna, H.D.; DiSalvo, Francis J.

    2012-06-29

    The discovery and understanding of new, improved materials to advance fuel cell technology are the objectives of the Cornell Fuel Cell Institute (CFCI) research program. CFCI was initially formed in 2003. This report highlights the accomplishments from 2006-2009. Many of the grand challenges in energy science and technology are based on the need for materials with greatly improved or even revolutionary properties and performance. This is certainly true for fuel cells, which have the promise of being highly efficient in the conversion of chemical energy to electrical energy. Fuel cells offer the possibility of efficiencies perhaps up to 90 % based on the free energy of reaction. Here, the challenges are clearly in the materials used to construct the heart of the fuel cell: the membrane electrode assembly (MEA). The MEA consists of two electrodes separated by an ionically conducting membrane. Each electrode is a nanocomposite of electronically conducting catalyst support, ionic conductor and open porosity, that together form three percolation networks that must connect to each catalyst nanoparticle; otherwise the catalyst is inactive. This report highlights the findings of the three years completing the CFCI funding, and incudes developments in materials for electrocatalyts, catalyst supports, materials with structured and functional porosity for electrodes, and novel electrolyte membranes. The report also discusses developments at understanding electrocatalytic mechanisms, especially on novel catalyst surfaces, plus in situ characterization techniques and contributions from theory. Much of the research of the CFCI continues within the Energy Materials Center at Cornell (emc2), a DOE funded, Office of Science Energy Frontier Research Center (EFRC).

  11. Present status of research activities at the national institute for fusion science and its role in international collaboration

    International Nuclear Information System (INIS)

    Fujita, J.

    1997-01-01

    In the National Institute for Fusion Science (NIFS), Japan, a helical magnetic confinement system named Large Helical Device (LHD) is under construction with objective of comprehensive studies of high temperature plasmas in a helical system and investigation of a helical reactor as an alternative approach. Superconducting coils of l = 2, m = 10, major radius R = 3.9 m, produce a steady state helical magnetic field for confinement, together with poloidal coils on LHD. The magnetic field strength on the axis is 3.0 T in the phase I and 4.0 T in the phase II experiment. The plasma major radius in LHD is 3.75 m, and averaged plasma radius is 0.6 m. The plasma will be produced and heated with ECH, and further heated with NBI and ICRF. It is also planned to produced a steady state plasma in LHD. It is expected to have the first plasma in 1998. Small devices such as CHS and others are under operation in the NIFS for supporting the LHD project. The Data and Planning Center of NIFS is collecting, compiling and evaluating atomic and molecular data which are necessary for nuclear fusion research. The talk will include the present status of the construction of LHD, research activities on the development of heating and diagnostic devices for LHD, and experimental results obtained on CHS, JIPP T-IIU and other devices. The role of NIFS on promoting IAEA activities to bridge large scale institutions and small and medium scale laboratories for world-wide collaborations in the field of plasma physics and fusion research will also be introduced, together with an idea of organizing a regional center in Asia. (author)

  12. The impact of changing computing technology on EPRI [Electric Power Research Institute] nuclear analysis codes

    International Nuclear Information System (INIS)

    Breen, R.J.

    1988-01-01

    The Nuclear Reload Management Program of the Nuclear Power Division (NPD) of the Electric Power Research Institute (EPRI) has the responsibility for initiating and managing applied research in selected nuclear engineering analysis functions for nuclear utilities. The computer systems that result from the research projects consist of large FORTRAN programs containing elaborate computational algorithms used to access such areas as core physics, fuel performance, thermal hydraulics, and transient analysis. This paper summarizes a study of computing technology trends sponsored by the NPD. The approach taken was to interview hardware and software vendors, industry observers, and utility personnel focusing on expected changes that will occur in the computing industry over the next 3 to 5 yr. Particular emphasis was placed on how these changes will impact engineering/scientific computer code development, maintenance, and use. In addition to the interviews, a workshop was held with attendees from EPRI, Power Computing Company, industry, and utilities. The workshop provided a forum for discussing issues and providing input into EPRI's long-term computer code planning process

  13. Ingestion of phosphorus-32 at Massachusetts Institute of Technology, Cambridge, Massachusetts, identified on August 19, 1995

    International Nuclear Information System (INIS)

    1995-12-01

    On Monday, October 16, 1995, the Massachussetts Institue of Technology (MIT, the licensee) notified the US Nuclear Regulatory Commission (NRC) of an incident involving ingestion of phosphorus-32 by a researcher at the MIT Center for Cancer Research. The licensee informed the NRC that a researcher had reported the incident on August 19. The licensee initially estimated the intake as 500 microcuries (19 MBq) and the dose as 4000 millirem (40 mSv) to the individual. On October 12, the licensee informed the researcher that its final intake estimate was 579 microcuries (21 MBq), just under the 600 microcuries (22 MBq) which would represent an overexposure. On October 17, the NRC established an Incident Investigation Team to investigate the case. NRC also contracted with Lawrence Livermore National Laboratory and Oak Ridge Institute for Science and Education to do independent dose assessments of the urine sample data and the whole-body data. The Team concluded that the licensee's final intake and dose estimates were in accordance with accepted scientific references and NRC guidance. However, recognizing the uncertainties involved in the use of models to simulate human characteristics, the Team determined the intake would be better characterized as likely falling within a range of 500 to 750 microcuries (19--28 NMq). An NRC medical consultant concluded that no symptoms or acute effects should be observed from an intake of this level

  14. The radiation accident at Institute for Energy Technology Sept. 1982. Some technical considerations

    International Nuclear Information System (INIS)

    Berteig, L.; Flatby, J.

    1985-01-01

    On September 2, 1982 a radiation accident with overexposure of one person happened at the gamma irradiation plant at Institute for Energy Technology, Kjeller, Norway. This person died from the radiation injury 13 days later. In the report reference is made to the work of different groups and bodies in connection with the accident. An analysis of the causes of the accident is given. For admittance control to the irradiation area there were generally two independent door interlock systems, one irradiation source position related and the other radiation related. The latter was dismantled for repair at the time of the accident. A micro-switch failure left the source in an unshielded position, initiated a green light on the control panel and released the interlock system of the door. According to working instructions a mobile radiation monitor should have been checked for proper function and carried by anyone entering the irradiation room. This seems not to have been carried out correctly. The conditions set forth for the restarting of the irradiation plant are presented. (orig./HP)

  15. The Politics of PVC: Technology and Institutions in Upland Water Management in Northern Thailand

    Directory of Open Access Journals (Sweden)

    Nathan Badenoch

    2009-06-01

    Full Text Available Conflict over water has grown in the mountainous areas of Thailand since the replacement of opium with alternative crops. PVC-sprinkler irrigation has enabled dry-season expansion of these cash crops on sloping lands, intensifying demand for water when it is most scarce. The technology and institutions that form the backbone of these irrigation systems have evolved simultaneously in a process of adaptive governance, in which local farmers draw on local social resources to balance competition and cooperation. Common conceptions of upstream – downstream conflict, pitting Thai against ethnic minorities in a struggle for resources, dominate the discourse of watersheds in Thailand. Upland water users themselves are diverse and their resource management systems are dynamic, even if they are not recognised as legitimate users of water. Understanding how upland communities create local systems of resource governance through dry-season irrigation is highly relevant for governance at higher levels, such as in the efforts to establish watershed networks and river basin organisations.

  16. Ingestion of phosphorus-32 at Massachusetts Institute of Technology, Cambridge, Massachusetts, identified on August 19, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    On Monday, October 16, 1995, the Massachussetts Institue of Technology (MIT, the licensee) notified the US Nuclear Regulatory Commission (NRC) of an incident involving ingestion of phosphorus-32 by a researcher at the MIT Center for Cancer Research. The licensee informed the NRC that a researcher had reported the incident on August 19. The licensee initially estimated the intake as 500 microcuries (19 MBq) and the dose as 4000 millirem (40 mSv) to the individual. On October 12, the licensee informed the researcher that its final intake estimate was 579 microcuries (21 MBq), just under the 600 microcuries (22 MBq) which would represent an overexposure. On October 17, the NRC established an Incident Investigation Team to investigate the case. NRC also contracted with Lawrence Livermore National Laboratory and Oak Ridge Institute for Science and Education to do independent dose assessments of the urine sample data and the whole-body data. The Team concluded that the licensee`s final intake and dose estimates were in accordance with accepted scientific references and NRC guidance. However, recognizing the uncertainties involved in the use of models to simulate human characteristics, the Team determined the intake would be better characterized as likely falling within a range of 500 to 750 microcuries (19--28 NMq). An NRC medical consultant concluded that no symptoms or acute effects should be observed from an intake of this level.

  17. The Historically Black Colleges and Universities/Minority Institutions Environmental Technology Consortium annual report, 1991--1992

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1992-12-31

    The member institutions of the Consortium continue to play a significant role in increasing the number of African Americans who enter the environmental professions through the implementation of the Consortium`s RETT Plan for Research, Education, and Technology Transfer. The four major program areas identified in the RETT Plan are as follows: (1) minority outreach and precollege education; (2) undergraduate education and postsecondary training; (3) graduate and postgraduate education and research; and (4) technology transfer.

  18. THE DEVELOPMENT OF AN ENTERPRISE RESOURCE PLANNING SYSTEM (ERP FOR A RESEARCH AND TECHNOLOGY INSTITUTE: THE CASE OF THE NUCLEAR AND ENERGY RESEARCH INSTITUTE -IPEN

    Directory of Open Access Journals (Sweden)

    Willy Hoppe de Souza

    2011-05-01

    Full Text Available This paper reports the history of the development of an enterprise resource planning (ERP dedicated to managing the technical activities of the Nuclear and Energy Research Institute, a governmental research and technology institute in Brazil. After the implementation of the new planning process, the development of a new management information system named SIGEPI was immediately initiated. The implementation of this system followed a strategy of integrating databases already available and developing new ones in order to facilitate the data collecting process and to improve the quality and the reliability of these data. This paper describes the evolution of SIGEPI, its main features and it also reports the difficulties faced for almost ten years of developments. The success factors of the case were classified into three groups: strategic, technical and behavioral ones. The impact of these factors and recommendation for future similar developments are presented.

  19. Current Status of the MOOC Movement in the World and Reaction of the Turkish Higher Education Institutions

    Directory of Open Access Journals (Sweden)

    Cengiz Hakan Aydin

    2017-03-01

    Full Text Available This manuscript intends to elaborate the current status of MOOC movement in the world and to reveal the results of a survey study in which the Turkish higher education institutions’ reactions to this movement was investigated. The survey was actually a part of a larger survey study that, as a deliverable of the EU funded HOME project, was conducted to contribute to the literature by providing an insight about European perspectives on MOOCs, to gain a better understanding of the strategic reasons why a higher education institution is or isn’t involved in MOOCs, and to compare these reasons with the results of similar studies in U.S. After a brief background and history of MOOC movement, following sections of the manuscript present the details (methodology and results of the survey study on the Turkish HE institutions’ strategies regarding adaptation of MOOCs. The final part of the manuscript consists of discussions and conclusions drawn in the light of the results of the study.

  20. Current status and improvement of the nuclear physics experiment course for speciality of nuclear physics and nuclear technology

    International Nuclear Information System (INIS)

    Qu Guopu; Guo Lanying

    1999-01-01

    The author reviews the current status of the nuclear physics experiment course for speciality of nuclear physics and nuclear technology in higher education and expresses author's views on the future improvement of the nuclear physics experiment course

  1. Current status of technology development for fabrication of Indian Test Blanket Module (TBM) of ITER

    Energy Technology Data Exchange (ETDEWEB)

    Jayakumar, T., E-mail: tjk@igcar.gov.in [Metallurgy and Materials Group, Indira Gandhi Centre for Atomic Research (IGCAR), Kalpakkam 603102 (India); Rajendra Kumar, E. [TBM Division, Institute for Plasma Research (IPR), Bhat, Gandhinagar 382428 (India)

    2014-10-15

    Highlights: • Status of technology developments for Indian TBM to be installed in ITER is presented. • Procedure development for EB, laser and laser-hybrid welding of RAFM steel presented. • Filler wires for RAFM steel for TIG, NG-TIG and laser-hybrid welding have been developed. • Feasibility of production of channel plate by HIP technology has been demonstrated. - Abstract: Ever since India decided to install its Lead-Lithium Ceramic Breeder (LLCB) TBM in ITER, various technologies for fabrication of Indian TBM are being pursued by IPR and IGCAR, in collaboration with various research laboratories in India. Welding consumables for joining India specific RAFM steels (IN-RAFMS), procedures for hot isostatic pressing, electron beam welding, laser and laser-hybrid welding have been developed. Considering the complex nature and limited access available for inspection, innovative inspection procedures that involved use of phased array ultrasonic and C-scan imaging are also being pursued. This paper presents the current status of these developments and provides a roadmap for the future activities planned in realizing Indian TBM for testing in ITER.

  2. Update of super-speed ground transportation technology development status and performance capabilities. CIGGT report No. 89-16

    Energy Technology Data Exchange (ETDEWEB)

    Hayes, W F

    1990-01-01

    This report presents an update of the Phase II assessment of development status and performance capabilities for four candidate super-speed ground transportation system alternatives for the Las Vegas-Southern California corridor. The four alternatives considered are the TGV wheel-on-rail technology, the Transrapid TR- 07 long-stator Electromagnetic Maglev (EMS) technology, the Japan Railways MLU Electrodynamic Maglev (EDS) technology, and the HSST Corp. HSST-400 short-stator Electromagnetic Maglev technology.

  3. The role of a research and development institute in the development and diffusion of technology

    NARCIS (Netherlands)

    Bongenaar, B.; Szirmai, A.

    1999-01-01

    In the context of late industrialisation the effective transfer and adaptation of technology is of great importance for economic development. International technology transfer is not a costless process, but requires considerable technological effort and investments in the development of

  4. Results of research and development activities in 1989 of the Institute for Neutron Physics and Reactor Technology

    International Nuclear Information System (INIS)

    1990-03-01

    The Institute for Neutron Physics and Reactor Technology treats research problems of nuclear engineering, mainly those that are related to the development of sodium-cooled fast breeder reactors and fusion reactor technology. The activities are in approximately equal parts of an experimental and theoretical nature. A great part of the research activities is performed in co-operation with other institutes and industrial groups in the framework of projects. For the Fast Breeder Reactor Project the Institute works on reactor physical design and safety problems by the core of large-scale fast breeder reactors. Questions concerning the consequences of accidents in light water reactors upon the environment and the population are treated as part of the Nuclear Safety Project. The Institute contributes to the Reprocessing Project with theoretical investigations on the physics of the fuel cycle and by developing control devices for a reprocessing plant. In the framework of the Fusion Project the Institute is concerned with neutron physical and technological questions of the breeder blanket. (orig.) [de

  5. Current status of education and training in nuclear technology in Bangladesh

    International Nuclear Information System (INIS)

    Ahmed, F.U.

    2007-01-01

    Bangladesh Atomic Energy Commission (BAEC) is the national authority for the introduction, promotion and safety issues of nuclear science and technology in the country. During the last four decades, a significant development has been achieved in the field of food and agriculture, medicine, industries and environment using nuclear technology. Education and training in science and technology played a vital role to achieve the significant development in these fields. Some local public universities and BAEC training facilities at home and abroad have played mainly a key role to develop the human resource in the field of nuclear science and technology. Over the last four decades, BAEC with its various specialized establishments has played a focused role in the advancement, understanding and usage of nuclear science and technologies in the country. Through years of cumulative efforts, BAEC has developed a pool of research infrastructure, capacity and human resources having been trained extensively at home and abroad in their respective fields. The trained manpower in the different fields of science and technology are working in the country to solve some national problems like arsenic contamination in drinking water, iodine deficiency disease goitre, cancer and many others. BAEC is going to establish a Nuclear Training Institute which will also have residential facilities. Government has already assured to fund to establish the Nuclear Training Centre in the campus of AERE, Savar. BAEC placed a formal proposal for Affiliation with Jahangirnagar University for Awarding Post Graduate Degrees in different specialized fields of nuclear science and technology. As this might take some time for implementation; therefore, BAEC has decided to start the academic program immediately under the present set-up of the organization. With this view, BAEC proposes to affiliate its Nuclear Training Institute with the Jahangirnagar University for pursuing academic degree programmes i.e. post

  6. Acceptance Factors Influencing Adoption of National Institute of Standards and Technology Information Security Standards: A Quantitative Study

    Science.gov (United States)

    Kiriakou, Charles M.

    2012-01-01

    Adoption of a comprehensive information security governance model and security controls is the best option organizations may have to protect their information assets and comply with regulatory requirements. Understanding acceptance factors of the National Institute of Standards and Technology (NIST) Risk Management Framework (RMF) comprehensive…

  7. The National Teacher Training Institute for Math, Science and Technology: Exemplary Practice in a Climate of Higher Standards.

    Science.gov (United States)

    Donlevy, James G., Ed.; Donlevy, Tia Rice, Ed.

    1999-01-01

    Reviews the NTTI (National Teacher Training Institute) for Math, Science and Technology model that trains teachers to use video and Internet resources to enhance math and science instruction. Discusses multimedia methodology; standards-based training; program impact in schools; and lesson plans available on the NTTI Web site. (Author/LRW)

  8. Current technological clinical practice in breast radiotherapy; results of a survey in EORTC-Radiation Oncology Group affiliated institutions

    NARCIS (Netherlands)

    van der Laan, Hans Paul; Hurkmans, Coen W; Kuten, Abraham; Westenberg, Helen A

    PURPOSE: To evaluate the current technological clinical practice of radiation therapy of the breast in institutions participating in the EORTC-Radiation Oncology Group (EORTC-ROG). MATERIALS AND METHODS: A survey was conducted between August 2008 and January 2009 on behalf of the Breast Working

  9. The 16 MeV - microtron at the Institute for Physics and Technology of Radiation Devices and its application

    International Nuclear Information System (INIS)

    Catana, D.; Panaitescu, I.; Axinescu, S.; Minea, R.

    1992-01-01

    The 17-orbit microtron at the Institute for Physics and Technology of Radiation Devices, Bucharest is described. The energy of electrons is 11 MeV in the first accelerating mode and 16 MeV in the second accelerating mode with a pulse beam power of about 400 Kw and a duty ratio of 10 -3 . (Author)

  10. Academic Venturing in Higher Education: Institutional Effects on Performance of University Technology Transfer. ASHE Annual Meeting Paper.

    Science.gov (United States)

    Powers, Joshua B.

    This study investigated institutional resource factors that may explain differential performance with university technology transfer--the process by which university research is transformed into marketable products. Using multi-source data on 108 research universities, a set of internal resources (financial, physical, human capital, and…

  11. Wiring Schools for Success: Lawmakers Revive Bill to Assist Minority-Serving Institutions in Upgrading Technology Infrastructure

    Science.gov (United States)

    Dervarics, Charles

    2005-01-01

    It is no secret that many historically Black colleges and universities are trailing behind TWIs (Traditional White Institutions) in the technology race. In fact, a 2000 study conducted by the National Association for Equal Opportunity in Higher Education (NAFEO) for the U.S. Department of Commerce found that most HBCUs did not have high-speed…

  12. Integrating Communication into Engineering Curricula: An Interdisciplinary Approach to Facilitating Transfer at New Mexico Institute of Mining and Technology

    Science.gov (United States)

    Ford, Julie Dyke

    2012-01-01

    This program profile describes a new approach towards integrating communication within Mechanical Engineering curricula. The author, who holds a joint appointment between Technical Communication and Mechanical Engineering at New Mexico Institute of Mining and Technology, has been collaborating with Mechanical Engineering colleagues to establish a…

  13. Ghana Space Science and Technology Institute (GSSTI),Ghana Atomic Energy Commission: Annual Report 2013/2014

    International Nuclear Information System (INIS)

    2014-01-01

    The report presents the structure as well as the research projects of the newly established Ghana Space Science and Technology Institute of the Ghana Atomic Energy Commission from January to December 2014. Research projects listed are in the areas of Astronomy and Astrophysics; Remote Sensing; Electronics and Instrumentation; and Satellite Communication.

  14. Gender Equality in Public Higher Education Institutions of Ethiopia: The Case of Science, Technology, Engineering, and Mathematics

    Science.gov (United States)

    Egne, Robsan Margo

    2014-01-01

    Ensuring gender equality in higher education system is high on the agenda worldwide particularly in science disciplines. This study explores the problems and prospects of gender equality in public higher education institutions of Ethiopia, especially in science, technology, engineering, and mathematics. Descriptive survey and analytical research…

  15. Section 7033 of the America COMPETES Act: Hispanic-Serving Institutions and Science, Technology, Engineering and Mathematics (STEM)

    Science.gov (United States)

    Gartrell, Sandra

    2009-01-01

    On March 1, 2009 from 2 pm to 5 pm at the Madison Hotel in Washington, DC, the National Science Foundation hosted a listening session, requesting input on Section 7033 of the America COMPETES (Creating Opportunities to Meaningfully Promote Excellence in Technology, Education, and Science) Act regarding Hispanic-serving institutions and science,…

  16. Total Isolation Status Monitoring and Management System by CAD Assisted Technology

    International Nuclear Information System (INIS)

    Nakamura, Masaaki

    1995-01-01

    Isolation tasks in a nuclear power station require high confidence and quick response particularly during the annual inspection when the equipment must be checked in a safe and planned manner. To realize these advanced isolation works, JAPC has developed TOtal Isolation Status Monitoring and Management System using CAD Assisted Technology. This system, TOMM-CAT, developed under the concept of 'User friendly advanced man-machine interface', allows planning and management to be performed on a CRT display. TOMM-CAT allows isolation tasks to be performed accurately and efficiently in conjunction with equipment information from the existing Job Order Management System, which runs on the station host computer. (author)

  17. Information technologies in optimization process of monitoring of software and hardware status

    Science.gov (United States)

    Nikitin, P. V.; Savinov, A. N.; Bazhenov, R. I.; Ryabov, I. V.

    2018-05-01

    The article describes a model of a hardware and software monitoring system for a large company that provides customers with software as a service (SaaS solution) using information technology. The main functions of the monitoring system are: provision of up-todate data for analyzing the state of the IT infrastructure, rapid detection of the fault and its effective elimination. The main risks associated with the provision of these services are described; the comparative characteristics of the software are given; author's methods of monitoring the status of software and hardware are proposed.

  18. Status of technologies related to the isolation of radioactive wastes in geologic repositories

    Energy Technology Data Exchange (ETDEWEB)

    Irish, E R [International Atomic Energy Agency, Vienna (Austria). Div. of Nuclear Safety and Environmental Protection; Cooley, C R [Department of Energy, Washington, DC (USA). Office of Nuclear Waste Management

    1980-09-01

    The authors present an overview of the status of technologies relevant to the isolation of radioactive wastes in geologic repositories. In addition to summarizing scientific and technical work on waste forms and packages, the: a) importance of the systems viewpoint, b) importance of modeling, c) need for site-specific investigations, d) consideration of future sub-surface human activities and e) prospects for successful isolation are discussed. It is concluded that successful isolation of radioactive wastes from the biosphere appears technically feasible for periods of thousands of years provided that the systems view is used in repository siting and design.

  19. Nuclear and Energy Research Institute (1956-2000). A case study under the science, technology and brazilian culture history

    International Nuclear Information System (INIS)

    Gordon, Ana Maria Pinho Leite

    2003-01-01

    We analysed a period of the contemporary Brazilian history with the aim to discuss the inter-relationship between science, technology (S and T) and culture in a developing country, showing as a background for a case of study the history of the 'Instituto de Pesquisas Energeticas e Nucleares'. The history of Science and Technology, as a result of the human brain ability of innovate using the resources offered by nature, it is not only the description of successive findings carried out by talented men. It is a reflex of determined age of history as a consequence of accumulated knowledge connected also to human and cultural relationships, which together leads to the scientific and technological progress. In fact, the human brain and society march along together and can not be separated in this journey. In our study we recovered the initial steps of IPEN's outbreak; inserted its achievements in the context of the national policy for nuclear technology and evaluated how this policy was a reply of the governmental organizations to the worldwide situation. Finally, we spread the scientific ideas and technological findings of this institution, who has translate much of the life style and culture of our society. For this purposes, we analysed internal technical report series elaborated by several researchers and few testimonies. The Institution developed the fuel cycle technology, supplied radioisotopes for medical diagnosis and treatment purposes, generating economic resources for our country. The nuclear techniques are a relevant tool for researchers of this Institution applied for several purposes, including the assessment of the radioactivity levels in the environment, radioprotection, etc. Besides those applications, other techniques including the laser technology, the fuel cell, corrosion studies, etc, were implemented as a result of the improved capabilities and skills acquired during the almost 50 years of the Institute's existence. We make evident two strong

  20. The role of personal and competent approach onto health-preserving technologies at the conditions of higher educational institution

    Directory of Open Access Journals (Sweden)

    Kamaiev O.I.

    2012-03-01

    Full Text Available The impact of personal and competent approach onto effectiveness of health-forming and health-preserving technologies in higher educational institution conditions was demonstrated. The substance of personal and competent approaches was disclosed. 54 female students took part in the research, from them - 28 in experimental and 26 in control group. It was ascertained that personal oriented approach provide for change of teacher's role and technology of teaching within educational process. Competent approach enables to reorient the teaching technology from the process to the result of education. Educational process gains the active and creative nature by introduction of mentioned approaches.