Configuring the users of new HIV-prevention technologies: the case of HIV pre-exposure prophylaxis.

Science.gov (United States)

Holt, Martin

2015-01-01

HIV pre-exposure prophylaxis (PrEP) is a prevention technology that involves prescribing antiretroviral drugs to HIV-negative people to protect them from infection. This paper considers how the development of the technology has necessitated the parallel configuration of its users, and how this process has affected the perception and uptake of the technology. In designing a technology, potential users are typically defined, enabled and constrained, partly to create a target population (or market) for the technology, but also to reassure people that it can be used safely and effectively. This process may or may not be helpful for the uptake and use of the technology. Published research on PrEP indicates that while the technology was under trial, the primary focus was on the 'at-risk' subject in need of PrEP, with little or no consideration of the other qualities necessary for successful use. Post-trial accounts of PrEP have begun to outline desirable qualities of successful PrEP use, such as caution, compliance and being organised. It appears that the PrEP user was only partially configured during the technology's development, and the initial focus on risk has done little to counter fears of the technology, which may partially account for its slow uptake.

Barriers affecting successful technology enablement of supply chain: An Indian perspective

Science.gov (United States)

Arora, R.; Haleem, A.; Farooquie, J. A.

2018-03-01

In order to compete, organizations need to focus on improving supply chain and technology acts as a major enabler. Technology enablement of supply chain has not always been successful and has been examined by many researchers. The purpose of this paper is to do a systematic literature review of technology enabled supply chain from a strategic viewpoint. The literature is examined from two perspectives. Firstly, it studies the growing interest in technology-enabled supply chain in India. Secondly, it studies barriers affecting technology enablement of supply chain. The literature review identifies that technology enabled supply chain helps in improving performance via effective decision making, monitoring entire supply chain, faster reaction to customer service problems, etc. The research has emphasized the importance of 12 barriers affecting technology enablement. This research will help as a guide for practitioners in order to successfully implement technology and fills the gap in existing literature by highlighting and consolidating the significant research work done in past.

The ENABLER---based on proven NERVA technology

International Nuclear Information System (INIS)

Livingston, J.M.; Pierce, B.L.

1991-01-01

The ENABLER reactor for use in a nuclear thermal propulsion engine uses the technology developed in the NERVA/Rover program, updated to incorporate advances in the technology. Using composite fuel, higher power densities per fuel element, improved radiation resistant control components and the advancements in use of carbon-carbon materials; the ENABLER can provide a specific impulse of 925 seconds, an engine thrust to weight (excluding reactor shield) approaching five, an improved initial Mass In Low Earth Orbit (IMLEO) and a consequent reduction in launch costs and logistics problems. This paper describes the 75,000 lbs thrust ENABLER design which is a low cost, low risk approach to meeting tomorrow's space propulsion needs

The ENABLER - Based on proven NERVA technology

International Nuclear Information System (INIS)

Livingston, J.M.; Pierce, B.L.

1991-01-01

The ENABLER reactor for use in a nuclear thermal propulsion engine uses the technology developed in the NERVA/Rover program, updated to incorporate advances in the technology. Using composite fuel, higher power densities per fuel element, improved radiation resistant control components and the advancements in use of carbon-carbon materials; the ENABLER can provide a specific impulse of 925 seconds, an engine thrust to weight (excluding reactor shield) approaching five, an improved initial mass in low Earth orbit and a consequent reduction in launch costs and logistics problems. This paper describes the 75,000 lbs thrust ENABLER design which is a low cost, low risk approach to meeting tommorrow's space propulsion needs

The ENABLER - Based on proven NERVA technology

Science.gov (United States)

Livingston, Julie M.; Pierce, Bill L.

The ENABLER reactor for use in a nuclear thermal propulsion engine uses the technology developed in the NERVA/Rover program, updated to incorporate advances in the technology. Using composite fuel, higher power densities per fuel element, improved radiation resistant control components and the advancements in use of carbon-carbon materials; the ENABLER can provide a specific impulse of 925 seconds, an engine thrust to weight (excluding reactor shield) approaching five, an improved initial mass in low Earth orbit and a consequent reduction in launch costs and logistics problems. This paper describes the 75,000 lbs thrust ENABLER design which is a low cost, low risk approach to meeting tommorrow's space propulsion needs.

SensorWeb 3G: Extending On-Orbit Sensor Capabilities to Enable Near Realtime User Configurability

Science.gov (United States)

Mandl, Daniel; Cappelaere, Pat; Frye, Stuart; Sohlberg, Rob; Ly, Vuong; Chien, Steve; Tran, Daniel; Davies, Ashley; Sullivan, Don; Ames, Troy;

Persuasive Technology and Users Acceptance of E-commerce: Users Perceptions of Website Persuasiveness

OpenAIRE

Muna M. Alhammad; Stephen R. Gulliver

2014-01-01

Persuasive technologies have been extensively applied in the context of e-commerce for the purpose of marketing, enhancing system credibility, and motivating users to adopt the systems. Recognising that persuasion impacts on consumer behaviour to purchase online have not been investigated previously. This study reviews theories of technology acceptance, and identifies their limitation in not considering the effect of persuasive technologies when determining user online technology acceptance. ...

NASA EOSDIS: Enabling Science by Improving User Knowledge

Science.gov (United States)

Lindsay, Francis; Brennan, Jennifer; Blumenfeld, Joshua

2016-01-01

Lessons learned and impacts of applying these newer methods are explained and include several examples from our current efforts such as the interactive, on-line webinars focusing on data discovery and access including tool usage, informal and informative data chats with data experts across our EOSDIS community, data user profile interviews with scientists actively using EOSDIS data in their research, and improved conference and meeting interactions via EOSDIS data interactively used during hyper-wall talks and Worldview application. The suite of internet-based, interactive capabilities and technologies has allowed our project to expand our user community by making the data and applications from numerous Earth science missions more engaging, approachable and meaningful.

Context-Enabled Business Intelligence

Energy Technology Data Exchange (ETDEWEB)

Troy Hiltbrand

2012-04-01

To truly understand context and apply it in business intelligence, it is vital to understand what context is and how it can be applied in addressing organizational needs. Context describes the facets of the environment that impact the way that end users interact with the system. Context includes aspects of location, chronology, access method, demographics, social influence/ relationships, end-user attitude/ emotional state, behavior/ past behavior, and presence. To be successful in making Business Intelligence content enabled, it is important to be able to capture the context of use user. With advances in technology, there are a number of ways in which this user based information can be gathered and exposed to enhance the overall end user experience.

An overview of enabling technology research in the United States

International Nuclear Information System (INIS)

Baker, Charles C.

2002-01-01

The mission of the US Fusion Energy Sciences Program is to advance plasma science, fusion science, and fusion technology--the knowledge base needed for an economically and environmentally attractive fusion energy source. In support of this overall mission, the Enabling Technology Program in the US incorporates both near and long term R and D, contributes to material and engineering sciences as well as technology development, contributes to spin-off applications, and performs global systems assessments and focused design studies. This work supports both magnetic and inertial fusion energy (IFE) concepts. The Enabling Technology research mission is to contribute to the national science and technology base by developing the enabling technology for existing and next-step experimental devices, by exploring and understanding key materials and technology feasibility issues for attractive fusion power sources, by conducting advanced design studies that integrate the wealth of our understanding to guide R and D priorities and by developing design solutions for next-step and future devices. The Enabling Technology Program Plan is organized around five elements: plasma technologies, fusion (chamber) technologies, materials sciences, advanced design, and IFE chamber and target technologies. The principal technical features and research objectives are described for each element

Technologies for physical activity self-monitoring: a study of differences between users and non-users

Directory of Open Access Journals (Sweden)

Åkerberg A

2017-02-01

Full Text Available Anna Åkerberg,1,2 Anne Söderlund,2 Maria Lindén1 1School of Innovation, Design and Engineering, 2School of Health, Care and Social Welfare, Mälardalen University, Västerås, Sweden Background: Different kinds of physical activity (PA self-monitoring technologies are used today to monitor and motivate PA behavior change. The user focus is essential in the development process of this technology, including potential future users such as representatives from the group of non-users. There is also a need to study whether there are differences between the groups of users and non-users. The aims of this study were to investigate possible differences between users and non-users regarding their opinions about PA self-monitoring technologies and to investigate differences in demographic variables between the groups. Materials and methods: Participants were randomly selected from seven municipalities in central Sweden. In total, 107 adults responded to the Physical Activity Products Questionnaire, which consisted of 22 questions. Results: Significant differences between the users and non-users were shown for six of the 20 measurement-related items: measures accurately (p=0.007, measures with high precision (p=0.024, measures distance (p=0.020, measures speed (p=0.003, shows minutes of activity (p=0.004, and shows geographical position (p=0.000. Significant differences between the users and non-users were also found for two of the 29 encouragement items: measures accurately (p=0.001 and has long-term memory (p=0.019. Significant differences between the groups were also shown for level of education (p=0.030 and level of physical exercise (p=0.037. Conclusion: With a few exceptions, the users and the non-users in this study had similar opinions about PA self-monitoring technologies. Because this study showed significant differences regarding level of education and level of physical exercise, these demographic variables seemed more relevant to investigate

Assessing user acceptance towards automated and conventional sink use for hand decontamination using the technology acceptance model.

Science.gov (United States)

Dawson, Carolyn H; Mackrill, Jamie B; Cain, Rebecca

2017-12-01

Hand hygiene (HH) prevents harmful contaminants spreading in settings including domestic, health care and food handling. Strategies to improve HH range from behavioural techniques through to automated sinks that ensure hand surface cleaning. This study aimed to assess user experience and acceptance towards a new automated sink, compared to a normal sink. An adapted version of the technology acceptance model (TAM) assessed each mode of handwashing. A within-subjects design enabled N = 46 participants to evaluate both sinks. Perceived Ease of Use and Satisfaction of Use were significantly lower for the automated sink, compared to the conventional sink (p technology. We provide recommendations for future HH technology development to contribute a positive user experience, relevant to technology developers, ergonomists and those involved in HH across all sectors. Practitioner Summary: The need to facilitate timely, effective hand hygiene to prevent illness has led to a rise in automated handwashing systems across different contexts. User acceptance is a key factor in system uptake. This paper applies the technology acceptance model as a means to explore and optimise the design of such systems.

Evaluation of User Acceptance of Mixed Reality Technology

Science.gov (United States)

Yusoff, Rasimah Che Mohd; Zaman, Halimah Badioze; Ahmad, Azlina

2011-01-01

This study investigates users' perception and acceptance of mixed reality (MR) technology. Acceptance of new information technologies has been important research area since 1990s. It is important to understand the reasons why people accept information technologies, as this can help to improve design, evaluation and prediction how users will…

Emerging issues and current trends in assistive technology use 2007-2010: practising, assisting and enabling learning for all.

Science.gov (United States)

Abbott, Chris; Brown, David; Evett, Lindsay; Standen, Penny

2014-11-01

Following an earlier review in 2007, a further review of the academic literature relating to the uses of assistive technology (AT) by children and young people was completed, covering the period 2007-2011. As in the earlier review, a tripartite taxonomy: technology uses to train or practise, technology uses to assist learning and technology uses to enable learning, was used in order to structure the findings. The key markers for research in this field and during these three years were user involvement, AT on mobile mainstream devices, the visibility of AT, technology for interaction and collaboration, new and developing interfaces and inclusive design principles. The paper concludes by locating these developments within the broader framework of the Digital Divide.

Semantic Technologies for User-Centric Home Network Management

OpenAIRE

Ibrahim Rana, Annie

2015-01-01

Home area network (HAN) management is problematic for ordinary home users. Lack of user expertise, potential complexity of administration tasks, extreme diversity of network devices, price pressures producing devices with minimal feature sets, and highly dynamic requirements of user applications are some of the main challenges in HANs. As networking becomes enabled in many more HAN devices, these problems are set to increase. A viable solution to address these challenges lie...

User driven innovation in mobile technologies?

DEFF Research Database (Denmark)

Larsen, Casper Schultz; Koch, Christian

2007-01-01

by systems already in function. Stories of prior business successes can be an important tool to ensure further innovative investments since lack of enterprise strategies is often an obstacle for innovation, especially user driven. Both small and large software houses develops dedicated software for coupling...... technology systems relying on the concept of affordance. This paper examines how innovation processes mediate between user orientations and technology offers. There is a great potential for mobile handheld ICT-systems to support numerous work processes in the AEC-industry and this can be substantiated...... site practises, and headquarters - inspired by specific user needs for optimizing work processes. The most important mechanisms evoked for creating the mediating found in the paper are ‘hybrids’ where professionals from AEC establishes a software house, developing ICT-products for specific on...

Review of Enabling Technologies to Facilitate Secure Compute Customization

Energy Technology Data Exchange (ETDEWEB)

Aderholdt, Ferrol [Tennessee Technological University; Caldwell, Blake A [ORNL; Hicks, Susan Elaine [ORNL; Koch, Scott M [ORNL; Naughton, III, Thomas J [ORNL; Pelfrey, Daniel S [ORNL; Pogge, James R [Tennessee Technological University; Scott, Stephen L [Tennessee Technological University; Shipman, Galen M [ORNL; Sorrillo, Lawrence [ORNL

2014-12-01

High performance computing environments are often used for a wide variety of workloads ranging from simulation, data transformation and analysis, and complex workflows to name just a few. These systems may process data for a variety of users, often requiring strong separation between job allocations. There are many challenges to establishing these secure enclaves within the shared infrastructure of high-performance computing (HPC) environments. The isolation mechanisms in the system software are the basic building blocks for enabling secure compute enclaves. There are a variety of approaches and the focus of this report is to review the different virtualization technologies that facilitate the creation of secure compute enclaves. The report reviews current operating system (OS) protection mechanisms and modern virtualization technologies to better understand the performance/isolation properties. We also examine the feasibility of running ``virtualized'' computing resources as non-privileged users, and providing controlled administrative permissions for standard users running within a virtualized context. Our examination includes technologies such as Linux containers (LXC [32], Docker [15]) and full virtualization (KVM [26], Xen [5]). We categorize these different approaches to virtualization into two broad groups: OS-level virtualization and system-level virtualization. The OS-level virtualization uses containers to allow a single OS kernel to be partitioned to create Virtual Environments (VE), e.g., LXC. The resources within the host's kernel are only virtualized in the sense of separate namespaces. In contrast, system-level virtualization uses hypervisors to manage multiple OS kernels and virtualize the physical resources (hardware) to create Virtual Machines (VM), e.g., Xen, KVM. This terminology of VE and VM, detailed in Section 2, is used throughout the report to distinguish between the two different approaches to providing virtualized execution

Bluetooth enables in-door mobile location services

OpenAIRE

Thongthammachart, Saowanee; Olesen, Henning

2003-01-01

Several technologies can be applied to enable mobile location services, but most of them suffer from limited accuracy and availability. GPS can solve the problem of determining the location of users in most outdoor situations, but an end-user position inside a building cannot be pinpointed. Other mobile location techniques can also provide the user's position, but the accuracy is rather low. In order to improve the accuracy and make location-based services really attractive, existing approach...

Naval Science & Technology: Enabling the Future Force

Science.gov (United States)

2013-04-01

corn for disruptive technologies Laser Cooling Spintronics Bz 1st U.S. Intel satellite GRAB Semiconductors GaAs, GaN, SiC GPS...Payoff • Innovative and game-changing • Approved by Corporate Board • Delivers prototype Innovative Naval Prototypes (5-10 Year) Disruptive ... Technologies Free Electron Laser Integrated Topside EM Railgun Sea Base Enablers Tactical Satellite Large Displacement UUV AACUS Directed

SciDAC Visualization and Analytics Center for Enabling Technologies

Energy Technology Data Exchange (ETDEWEB)

Joy, Kenneth I. [Univ. of California, Davis, CA (United States)

2014-09-14

This project focuses on leveraging scientific visualization and analytics software technology as an enabling technology for increasing scientific productivity and insight. Advances in computational technology have resulted in an "information big bang," which in turn has created a significant data understanding challenge. This challenge is widely acknowledged to be one of the primary bottlenecks in contemporary science. The vision for our Center is to respond directly to that challenge by adapting, extending, creating when necessary and deploying visualization and data understanding technologies for our science stakeholders. Using an organizational model as a Visualization and Analytics Center for Enabling Technologies (VACET), we are well positioned to be responsive to the needs of a diverse set of scientific stakeholders in a coordinated fashion using a range of visualization, mathematics, statistics, computer and computational science and data management technologies.

Elckerlyc goes mobile - Enabling natural interaction in mobile user interfaces

NARCIS (Netherlands)

Klaassen, Randy; Hendrix, Jordi; Reidsma, Dennis; op den Akker, Hendrikus J.A.; van Dijk, Elisabeth M.A.G.; op den Akker, Harm

The fast growth of computational resources and speech technology available on mobile devices makes it possible to entertain users of these devices in having a natural dialogue with service systems. These systems are sometimes perceived as social agents and this can be supported by presenting them on

Cognitive Spectrum Sharing: An Enabling Wireless Communication Technology for a Wide Use of Smart Systems

Directory of Open Access Journals (Sweden)

Romano Fantacci

2016-05-01

Full Text Available A smart city is an environment where a pervasive, multi-service network is employed to provide citizens improved living conditions as well as better public safety and security. Advanced communication technologies are essential to achieve this goal. In particular, an efficient and reliable communication network plays a crucial role in providing continue, ubiquitous, and reliable interconnections among users, smart devices, and applications. As a consequence, wireless networking appears as the principal enabling communication technology despite the necessity to face severe challenges to satisfy the needs arising from a smart environment, such as explosive data volume, heterogeneous data traffic, and support of quality of service constraints. An interesting approach for meeting the growing data demand due to smart city applications is to adopt suitable methodologies to improve the usage of all potential spectrum resources. Towards this goal, a very promising solution is represented by the Cognitive Radio technology that enables context-aware capability in order to pursue an efficient use of the available communication resources according to the surrounding environment conditions. In this paper we provide a review of the characteristics, challenges, and solutions of a smart city communication architecture, based on the Cognitive Radio technology, by focusing on two new network paradigms—namely, Heterogeneous Network and Machines-to-Machines communications—that are of special interest to efficiently support smart city applications and services.

User-led innovations, participation processes and the use of energy technologies

Energy Technology Data Exchange (ETDEWEB)

Ornetzeder, Michael [Centre for Social Innovation, Vienna (Austria); Rohracher, Harald [Inter-Univ. Research Centre for Technology, Work and Culture, Graz (Austria)

2003-07-01

In this paper we will pose the question whether a higher level of user participation may improve the development and dissemination of energy-efficient technologies. We will especially focus on user-led innovation processes with a high involvement of individual end-users. In our argument we will draw on several case studies in the field of renewable energy technologies - in particular solar collectors and biomass heating systems - and sustainable building technologies. Users in these case studies were involved in the design or planning processes, sometimes in a very selective way and with limited influence, sometimes very active and for quite a long period of time. Especially in the case of renewable energy technologies self-building groups were highly successful and resulted in improved and widely disseminated technologies. Based on the empirical results of our case studies we will critically discuss the potential of user involvement for energy efficiency, and various forms of user participation and involvement as a strategy to change consumption patterns of end-users in general. Special emphasis will be put on technological and social pre-conditions which might allow the transfer of our examples from renewable energies to potentially energy efficient technologies.

How IMS Enables Converged Services for Cable and 3G Technologies: A Survey

Directory of Open Access Journals (Sweden)

Noël Crespi

2008-04-01

Full Text Available The IP multimedia subsystem (IMS is a service control overlay standardized by the 3GPP. The IMS is based on session initiation protocol (SIP to establish, modify, and terminate the sessions. It provides a clean separation between services, signaling, and media with the potential to enable control and management of services over multiple transport technologies. In the scope of fixed-mobile convergence, this paper is dedicated to presenting a review of how cable networks can be integrated into IMS technology to achieve 3G-cable horizontal convergence. Cable networks, as one of the major fixed broadband access technologies with PacketCable architecture, are able to provide broadband internet access and VoIP in addition to cable TV. In this article, we review the evolution in PacketCable architecture to take up IMS. In this way, we consider the standardization and research activities to address this integration. We review some important challenges such as SIP protocol compatibility, defining unique user profile, required enhancement in authentication process, QoS and charging system.

How IMS Enables Converged Services for Cable and 3G Technologies: A Survey

Directory of Open Access Journals (Sweden)

Mani Mehdi

2008-01-01

Full Text Available The IP multimedia subsystem (IMS is a service control overlay standardized by the 3GPP. The IMS is based on session initiation protocol (SIP to establish, modify, and terminate the sessions. It provides a clean separation between services, signaling, and media with the potential to enable control and management of services over multiple transport technologies. In the scope of fixed-mobile convergence, this paper is dedicated to presenting a review of how cable networks can be integrated into IMS technology to achieve 3G-cable horizontal convergence. Cable networks, as one of the major fixed broadband access technologies with PacketCable architecture, are able to provide broadband internet access and VoIP in addition to cable TV. In this article, we review the evolution in PacketCable architecture to take up IMS. In this way, we consider the standardization and research activities to address this integration. We review some important challenges such as SIP protocol compatibility, defining unique user profile, required enhancement in authentication process, QoS and charging system.

On enabling secure applications through off-line biometric identification

Energy Technology Data Exchange (ETDEWEB)

Davida, G.I. [Univ. of Wisconsin, Milwaukee, WI (United States); Frankel, Y. [CertCo LLC, New York, NY (United States); Matt, B.J. [Sandia National Labs., Albuquerque, NM (United States)

1998-04-01

In developing secure applications and systems, the designers often must incorporate secure user identification in the design specification. In this paper, the authors study secure off line authenticated user identification schemes based on a biometric system that can measure a user`s biometric accurately (up to some Hamming distance). The schemes presented here enhance identification and authorization in secure applications by binding a biometric template with authorization information on a token such as a magnetic strip. Also developed here are schemes specifically designed to minimize the compromise of a user`s private biometrics data, encapsulated in the authorization information, without requiring secure hardware tokens. In this paper the authors furthermore study the feasibility of biometrics performing as an enabling technology for secure system and application design. The authors investigate a new technology which allows a user`s biometrics to facilitate cryptographic mechanisms.

Emergent information technologies and enabling policies for counter-terrorism

CERN Document Server

Popp, R

2006-01-01

Explores both counter-terrorism and enabling policy dimensions of emerging information technologies in national security After the September 11th attacks, "connecting the dots" has become the watchword for using information and intelligence to protect the United States from future terrorist attacks. Advanced and emerging information technologies offer key assets in confronting a secretive, asymmetric, and networked enemy. Yet, in a free and open society, policies must ensure that these powerful technologies are used responsibly, and that privacy and civil liberties remain protected. Emergent Information Technologies and Enabling Policies for Counter-Terrorism provides a unique, integrated treatment of cutting-edge counter-terrorism technologies and their corresponding policy options. Featuring contributions from nationally recognized authorities and experts, this book brings together a diverse knowledge base for those charged with protecting our nation from terrorist attacks while preserving our civil liberti...

Enabling technologies for oil sands development

International Nuclear Information System (INIS)

Bailey, R.T.

1998-01-01

A review of oil sands production and expansion possibilities in Alberta were presented. The enabling technologies for oil sands projects include mining (bucketwheels, draglines, trucks, shovels conveyors, slurry hydrotransport); extraction (conditioning tumblers, pipelines, tanks, hot water, caustic, cold water, frothers); froth cleaning (centrifuges, solvent treatment); tailings (tailings ponds, consolidated tailings); and upgrading (coking, hydrotreating for SCO, hydrocracking and multiple products). The enabling technologies for in situ production include cyclic steam stimulation for vertical wells, steam assisted gravity drainage (SAGD) for dual horizontal wells, and cold production with wormholes. This paper described the recovery potentials of each of these processes. It also discussed the role of government and industry in research and cooperative research involving both the private and public sectors. Examples of each of these were described such as SAGD, the OSLO cold water extraction process, The consolidated tailings (CT) project, the low energy extraction process (slurry production, hydrotransport, pipeline conditioning and warm water extraction), and research in fine tailings, to demonstrate that although objectives may differ, government and industry research objectives are complementary

Survey of Enabling Technologies for CAPS

Science.gov (United States)

Antol, Jeffrey; Mazanek, Daniel D.; Koons, Robert H.

2005-01-01

The enabling technologies required for the development of a viable Comet/Asteroid Protection System (CAPS) can be divided into two principal areas: detection and deflection/orbit modification. With the proper funding levels, many of the technologies needed to support a CAPS architecture could be achievable within the next 15 to 20 years. In fact, many advanced detection technologies are currently in development for future in-space telescope systems such as the James Webb Space Telescope (JWST), formerly known as the Next Generation Space Telescope. It is anticipated that many of the JWST technologies would be available for application for CAPS detection concepts. Deflection/orbit modification technologies are also currently being studied as part of advanced power and propulsion research. However, many of these technologies, such as extremely high-output power systems, advanced propulsion, heat rejection, and directed energy systems, would likely be farther term in availability than many of the detection technologies. Discussed subsequently is a preliminary examination of the main technologies that have been identified as being essential to providing the element functionality defined during the CAPS conceptual study. The detailed requirements for many of the technology areas are still unknown, and many additional technologies will be identified as future in-depth studies are conducted in this area.

User-Centered Design and Interactive Health Technologies for Patients

Science.gov (United States)

De Vito Dabbs, Annette; Myers, Brad A.; Mc Curry, Kenneth R.; Dunbar-Jacob, Jacqueline; Hawkins, Robert P.; Begey, Alex; Dew, Mary Amanda

2010-01-01

Despite recommendations that patients be involved in the design and testing of health technologies, few reports describe how to involve patients in systematic and meaningful ways to ensure that applications are customized to meet their needs. User-centered design (UCD) is an approach that involves end-users throughout the development process so that technology support tasks, are easy to operate, and are of value to users. In this paper we provide an overview of UCD and use the development of Pocket Personal Assistant for Tracking Health (Pocket PATH), to illustrate how these principles and techniques were applied to involve patients in the development of this interactive health technology. Involving patient-users in the design and testing ensured functionality and usability, therefore increasing the likelihood of promoting the intended health outcomes. PMID:19411947

Evaluating Complex Interventions and Health Technologies Using Normalization Process Theory: Development of a Simplified Approach and Web-Enabled Toolkit

LENUS (Irish Health Repository)

May, Carl R

2011-09-30

Abstract Background Normalization Process Theory (NPT) can be used to explain implementation processes in health care relating to new technologies and complex interventions. This paper describes the processes by which we developed a simplified version of NPT for use by clinicians, managers, and policy makers, and which could be embedded in a web-enabled toolkit and on-line users manual. Methods Between 2006 and 2010 we undertook four tasks. (i) We presented NPT to potential and actual users in multiple workshops, seminars, and presentations. (ii) Using what we discovered from these meetings, we decided to create a simplified set of statements and explanations expressing core constructs of the theory (iii) We circulated these statements to a criterion sample of 60 researchers, clinicians and others, using SurveyMonkey to collect qualitative textual data about their criticisms of the statements. (iv) We then reconstructed the statements and explanations to meet users\\' criticisms, embedded them in a web-enabled toolkit, and beta tested this \\'in the wild\\'. Results On-line data collection was effective: over a four week period 50\\/60 participants responded using SurveyMonkey (40\\/60) or direct phone and email contact (10\\/60). An additional nine responses were received from people who had been sent the SurveyMonkey form by other respondents. Beta testing of the web enabled toolkit produced 13 responses, from 327 visits to http:\\/\\/www.normalizationprocess.org. Qualitative analysis of both sets of responses showed a high level of support for the statements but also showed that some statements poorly expressed their underlying constructs or overlapped with others. These were rewritten to take account of users\\' criticisms and then embedded in a web-enabled toolkit. As a result we were able translate the core constructs into a simplified set of statements that could be utilized by non-experts. Conclusion Normalization Process Theory has been developed through

Evaluating complex interventions and health technologies using normalization process theory: development of a simplified approach and web-enabled toolkit

Directory of Open Access Journals (Sweden)

Murray Elizabeth

2011-09-01

Full Text Available Abstract Background Normalization Process Theory (NPT can be used to explain implementation processes in health care relating to new technologies and complex interventions. This paper describes the processes by which we developed a simplified version of NPT for use by clinicians, managers, and policy makers, and which could be embedded in a web-enabled toolkit and on-line users manual. Methods Between 2006 and 2010 we undertook four tasks. (i We presented NPT to potential and actual users in multiple workshops, seminars, and presentations. (ii Using what we discovered from these meetings, we decided to create a simplified set of statements and explanations expressing core constructs of the theory (iii We circulated these statements to a criterion sample of 60 researchers, clinicians and others, using SurveyMonkey to collect qualitative textual data about their criticisms of the statements. (iv We then reconstructed the statements and explanations to meet users' criticisms, embedded them in a web-enabled toolkit, and beta tested this 'in the wild'. Results On-line data collection was effective: over a four week period 50/60 participants responded using SurveyMonkey (40/60 or direct phone and email contact (10/60. An additional nine responses were received from people who had been sent the SurveyMonkey form by other respondents. Beta testing of the web enabled toolkit produced 13 responses, from 327 visits to http://www.normalizationprocess.org. Qualitative analysis of both sets of responses showed a high level of support for the statements but also showed that some statements poorly expressed their underlying constructs or overlapped with others. These were rewritten to take account of users' criticisms and then embedded in a web-enabled toolkit. As a result we were able translate the core constructs into a simplified set of statements that could be utilized by non-experts. Conclusion Normalization Process Theory has been developed through

Transformative Learning: Patterns of Psychophysiologic Response and Technology-Enabled Learning and Intervention Systems

Science.gov (United States)

2008-09-01

Psychophysiologic Response and Technology -Enabled Learning and Intervention Systems PRINCIPAL INVESTIGATOR: Leigh W. Jerome, Ph.D...NUMBER Transformative Learning : Patterns of Psychophysiologic Response and Technology - Enabled Learning and Intervention Systems 5b. GRANT NUMBER...project entitled “Transformative Learning : Patterns of Psychophysiologic Response in Technology Enabled Learning and Intervention Systems.” The

User-led innovations and participation processes: lessons from sustainable energy technologies

Energy Technology Data Exchange (ETDEWEB)

Ornetzeder, Michael [ZSI - Centre for Social Innovation, Linke Wienzeile 246, A-1150 Vienna (Austria); Rohracher, Harald [IFF/IFZ - Inter-University Research Centre for Technology, Work and Culture, Schloegelgasse 2, A-8010 Graz (Austria)

2006-01-01

In this paper we will pose the question whether a higher level of user participation could be used as a strategy to improve the development and dissemination of sustainable energy technologies. We will especially focus on user-led innovation processes with a high involvement of individual end-users. In our argument we will draw on several case studies in the field of renewable energy technologies-in particular solar collectors and biomass heating systems-and sustainable building technologies. Users in these case studies were involved in the design or planning processes, sometimes in a very selective way and with limited influence, sometimes very active and for quite a long period of time. Especially in the case of renewable energy technologies self-building groups were highly successful and resulted in improved and widely disseminated technologies. Based on the empirical results of our case studies we will critically discuss the potential of user involvement (especially in self-building groups) for the development and promotion of sustainable energy technologies and outline technological and social pre-conditions for the success of such approaches. (author)

User-led innovations and participation processes: lessons from sustainable energy technologies

International Nuclear Information System (INIS)

Ornetzeder, Michael; Rohracher, Harald

2006-01-01

In this paper we will pose the question whether a higher level of user participation could be used as a strategy to improve the development and dissemination of sustainable energy technologies. We will especially focus on user-led innovation processes with a high involvement of individual end-users. In our argument we will draw on several case studies in the field of renewable energy technologies-in particular solar collectors and biomass heating systems-and sustainable building technologies. Users in these case studies were involved in the design or planning processes, sometimes in a very selective way and with limited influence, sometimes very active and for quite a long period of time. Especially in the case of renewable energy technologies self-building groups were highly successful and resulted in improved and widely disseminated technologies. Based on the empirical results of our case studies we will critically discuss the potential of user involvement (especially in self-building groups) for the development and promotion of sustainable energy technologies and outline technological and social pre-conditions for the success of such approaches

SciDAC visualization and analytics center for enabling technology

International Nuclear Information System (INIS)

Bethel, E Wes; Johnson, Chris; Joy, Ken; Ahern, Sean; Pascucci, Valerio; Childs, Hank; Cohen, Jonathan; Duchaineau, Mark; Hamann, Bernd; Hansen, Charles; Laney, Dan; Lindstrom, Peter; Meredith, Jeremy; Ostrouchov, George; Parker, Steven; Silva, Claudio; Sanderson, Allen; Tricoche, Xavier

2007-01-01

The Visualization and Analytics Center for Enabling Technologies (VACET) focuses on leveraging scientific visualization and analytics software technology as an enabling technology for increasing scientific productivity and insight. Advances in computational technology have resulted in an 'information big bang,' which in turn has created a significant data understanding challenge. This challenge is widely acknowledged to be one of the primary bottlenecks in contemporary science. The vision of VACET is to adapt, extend, create when necessary, and deploy visual data analysis solutions that are responsive to the needs of DOE's computational and experimental scientists. Our center is engineered to be directly responsive to those needs and to deliver solutions for use in DOE's large open computing facilities. The research and development directly target data understanding problems provided by our scientific application stakeholders. VACET draws from a diverse set of visualization technology ranging from production quality applications and application frameworks to state-of-the-art algorithms for visualization, analysis, analytics, data manipulation, and data management

Numerical Representations and User Behaviour in Social Networking Sites

DEFF Research Database (Denmark)

Sjöklint, Mimmi; Constantiou, Ioanna; Trier, Matthias

2013-01-01

The new technological enhancements and the accessibility to varieties of online applications, enable users to collect personal data and perform self-evaluation through test, comparison and experimentation. The sparked interest in numbers and numbers as self-representative visualisations is promin......The new technological enhancements and the accessibility to varieties of online applications, enable users to collect personal data and perform self-evaluation through test, comparison and experimentation. The sparked interest in numbers and numbers as self-representative visualisations...... theoretical pillars: self-determination theory, heuristic decision making and behavioural economics. A discussion departs from these convictions to investigate user reactions and behaviour when faced with numerical representations in the SNS....

Enabling MEMS technologies for communications systems

Science.gov (United States)

Lubecke, Victor M.; Barber, Bradley P.; Arney, Susanne

2001-11-01

Modern communications demands have been steadily growing not only in size, but sophistication. Phone calls over copper wires have evolved into high definition video conferencing over optical fibers, and wireless internet browsing. The technology used to meet these demands is under constant pressure to provide increased capacity, speed, and efficiency, all with reduced size and cost. Various MEMS technologies have shown great promise for meeting these challenges by extending the performance of conventional circuitry and introducing radical new systems approaches. A variety of strategic MEMS structures including various cost-effective free-space optics and high-Q RF components are described, along with related practical implementation issues. These components are rapidly becoming essential for enabling the development of progressive new communications systems technologies including all-optical networks, and low cost multi-system wireless terminals and basestations.

The embodied user : corporeal awareness & media technology

NARCIS (Netherlands)

Haans, A.

2010-01-01

Human beings are proficient users of tools and technology. At times, our interactions with a technological artifact appear so effortless, that the distinction between the artifact and the body starts to fade. When operating anthropomorphically designed teleoperation systems, for example, some people

Satellite-enabled educational services specification and requirements analysis based on user feedback

OpenAIRE

Tsekeridou, Sofia; Tiropanis, Thanassis; Rorris, Dimitris; Constantinos, Makropoulos; Serif, Tacha; Stergioulas, Lampros

2008-01-01

Advanced tele-education services provision in remote geographically dispersed user communities (such as agriculture and maritime), based on the specific needs and requirements of such communities, implies significant infrastructural and broadband connectivity requirements for rich media, timely and quality-assured content delivery and interactivity. The solution to broadband access anywhere is provided by satellite-enabled communication infrastructures. This paper aims to present such satelli...

Radiation technology enabled market access to Indian mango

International Nuclear Information System (INIS)

Sharma, Arun

2009-01-01

International trade in agricultural produce is subject to quarantine barriers imposed by importing countries to limit the entry of exotic pests and pathogens. Radiation technology provides an effective alternative to fumigants which are being gradually phased out. The technology has enabled market access to Indian mangoes in the US market after a gap of 18 years. The technology provides opportunity for export of other fruits and vegetables as well to countries like US, Australia and New Zealand. (author)

End-User Control over Physical User-Interfaces: From Digital Fabrication to Real-Time Adaptability

OpenAIRE

Ramakers, Raf

2016-01-01

Graphical user interfaces are at the core of the majority of computing devices, including WIMP (windows, icons, menus, pointer) interaction styles and touch interactions. The popularity of graphical user interfaces stems from their ability to adapt to a multitude of tasks, such as document editing, messaging, browsing, etc. New tools and technologies also enabled users without a technical background to author these kind of digital interfaces, for example, filters for quick photo editing, inte...

The dark side of technologies: technostress among users of information and communication technologies.

Science.gov (United States)

Salanova, Marisa; Llorens, Susana; Cifre, Eva

2013-01-01

This paper tests the structure and the predictors of two psychological experiences of technostress associated with the use of information and communication technologies (ICT), i.e., technostrain (users report feelings of anxiety, fatigue, scepticism and inefficacy beliefs related to the use of technologies) and technoaddiction (users feel bad due to an excessive and compulsive use of these technologies). The study included a sample of 1072 ICT users (N = 675 nonintensive ICT users and N = 397 intensive ICT users). Results from multigroup confirmatory factor analyses among non-intensive and intensive ICT users showed, as expected, the four-factor structure of technostrain in both samples. Secondly, and also as expected, confirmatory factorial analyses revealed that technostress experiences are characterized not only by technostrain but also by an excessive and compulsive use of ICT. Moreover, multiple analyses of variance showed significant differences between non-intensive and intensive ICT users (1) in the dimensions of technostress and (2) in specific job demands and job/personal resources. Finally, linear multiple regression analyses revealed that technostrain is positively predicted by work overload, role ambiguity, emotional overload, mobbing and obstacles hindering ICT use, as well as by lack of autonomy, transformational leadership, social support, ICT use facilitators and mental competences. Work overload, role ambiguity and mobbing, as well as the lack of emotional competences, positively predict technoaddiction. Theoretical and practical implications, in addition to future research, are discussed.

User-centric technology design for nonprofit and civic engagements

CERN Document Server

Saeed, Saqib

2014-01-01

Due to the increased global political importance of the nonprofit sector, its technological support and organizational characteristics have become important fields of research. In order to conduct effective work, nonprofits need to communicate and coordinate effectively. However, such settings are generally characterized by a lack of resources, an absence of formal hierarchical structures and differences in languages and culture among the activists. Modern technologies could help nonprofit networks in improving their working. In order to design appropriate technological support for such settings, it is important to understand their work practices, which widely differ from traditional business organizations. This book aims to strengthen the body of knowledge by providing user studies and concepts related to user centered technology design process for nonprofit settings. The examination of ethnographic studies and user centered evaluation of IT artifacts in practice will further the understanding of design requ...

User-centered applications: Use of mobile information technologies to promote sustainable school healthcare services

Directory of Open Access Journals (Sweden)

Alida Veldsman

2015-07-01

Full Text Available The youth, especially school going children, are the future of any society. It is therefore important that children should receive adequate healthcare support at an early age in order to strive to preserve and ensure better education and welfare of the children and continuity in societal success. Despite the strategic initiatives that aim at improving the general health of school going children, such as South Africa’s Integrated School Health Policy, there still exist challenges in support programmes meant to alleviate the barriers to effective healthcare towards improved education for the school children. Advances in ICT enable a fundamental redesign of healthcare processes based on the use and integration of electronic communication at all levels. New communication technologies can support a transition from institution centric to user-centric applications. This paper defines key principles and challenges for designers, policy makers, and evaluators of user-centred technologies for healthcare in schools. The paper employs the User Experience Management Model (UXM2 to review the current and emerging trends, and highlights challenges related to the design of a typical m-ICT application that supports delivery of healthcare in schools. The paper reaches conclusions for next steps that will advance the domain.

End-User Evaluations of Semantic Web Technologies

Energy Technology Data Exchange (ETDEWEB)

McCool, Rob; Cowell, Andrew J.; Thurman, David A.

2005-11-07

Stanford University's Knowledge Systems Laboratory (KSL) is working in partnership with Battelle Memorial Institute and IBM Watson Research Center to develop a suite of technologies for information extraction, knowledge representation & reasoning, and human-information interaction, in unison entitled 'Knowledge Associates for Novel Intelligence' (KANI). We have developed an integrated analytic environment composed of a collection of analyst associates, software components that aid the user at different stages of the information analysis process. An important part of our participatory design process has been to ensure our technologies and designs are tightly integrate with the needs and requirements of our end users, To this end, we perform a sequence of evaluations towards the end of the development process that ensure the technologies are both functional and usable. This paper reports on that process.

Involving users in the development of embedded technology in construction

DEFF Research Database (Denmark)

Storgaard, Kresten; Buch-Hansen, Thomas Cornelius; Ærenlund, Lærke

2011-01-01

Based on a project about user driven innovation and embedded technology in construction (BIIB), the paper discusses methodological issues on user involvement. In the paper especially focus is on the experiences on involving users in collaborative development of scenarios, in the validation...... of scenarios and in developing innovative solutions on a conceptual level. The project discusses 1) concepts of users and 2) methods for collaborative involvement. The first discussion involves presentation of an extended user concept and a discussion of differences between lead users and need-advanced users....... The second discussion on collaborative involvement, discuss experiences with methods for communication across cultural and professional competences with reference to boundary objects, tangible systems and visualization. In the project four segments of situations for use of embedded technology in construction...

Nano-enabled environmental products and technologies - opportunities and drawbacks

DEFF Research Database (Denmark)

Møller Christensen, Frans; Brinch, Anna; Kjølholt, Jesper

The project aims to investigate the benefits for health and environment that the use of nanomaterials in products and technologies may have. More specifically, the project provides an overview of the most relevant nano-enabled environmental technologies, different types of products and technologies...... on the (Danish) market, as well as products and technologies, which are still in R&D and it will provide a qualitative overview of health and environmental pros and cons of these technologies. The project has focused on technologies applied in: 1) purification of water and wastewater, 2) remediation of soil...

On enabling secure applications through off-line biometric identification

International Nuclear Information System (INIS)

Davida, G.I.; Frankel, Y.; Matt, B.J.

1998-04-01

In developing secure applications and systems, the designers often must incorporate secure user identification in the design specification. In this paper, the authors study secure off line authenticated user identification schemes based on a biometric system that can measure a user's biometric accurately (up to some Hamming distance). The schemes presented here enhance identification and authorization in secure applications by binding a biometric template with authorization information on a token such as a magnetic strip. Also developed here are schemes specifically designed to minimize the compromise of a user's private biometrics data, encapsulated in the authorization information, without requiring secure hardware tokens. In this paper the authors furthermore study the feasibility of biometrics performing as an enabling technology for secure system and application design. The authors investigate a new technology which allows a user's biometrics to facilitate cryptographic mechanisms

User Characteristics、User Involvement and Technology Acceptance in Library Automation System Usage

Directory of Open Access Journals (Sweden)

Piching Chu

2002-12-01

Full Text Available This paper looks into the relationship of user characteristics, user involvement and technology acceptance, also try to find the relationship of the above three variables and library automation system usage. By interview and questionnaire study, the results are described, according to the analysis of the relative literature and the main conclusions, the researcher offers some suggestions for improving the system usage.[Article content in Chinese

Technology enabled evolutions in liquids marketing

International Nuclear Information System (INIS)

Manning, S.

1998-01-01

Deregulation, mergers, changing economic conditions, and downsizing have captured the headlines in the energy industry in recent times. To say that companies have struggled to react to these changes would be an understatement. Huge trading organizations have grown from nothing in a few years, while entire industry segments have been forced to restructure themselves. Information technology has enabled much of this change. By bringing information management out of the back office and onto the trading floors, companies have radically redesigned their work processes. The future promises even faster change, with business focus turning to innovative packaging of services with products, expanding asset bases, and reducing costs. Information technology will fuel this transformation by providing enterprise-wide trading solutions and, ultimately, linking the entire industry into a virtual supply chain. To remain competitive, companies need a strategy to manage information technology as a core asset

Nordic Housing Enabler

DEFF Research Database (Denmark)

Helle, Tina; Brandt, Åse

Development and reliability testing of the Nordic Housing Enabler – an instrument for accessibility assessment of the physical housing. Tina Helle & Åse Brandt University of Lund, Health Sciences, Faculty of Medicine (SE) and University College Northern Jutland, Occupational Therapy department (DK......). Danish Centre for Assistive Technology. Abstract. For decades, accessibility to the physical housing environment for people with functional limitations has been of interest politically, professionally and for the users. Guidelines and norms on accessible housing design have gradually been developed......, however, the built environment shows serious deficits when it comes to accessibility. This study addresses development of a content valid cross-Nordic version of the Housing Enabler and investigation of inter-rater reliability, when used in occupational therapy practice. The instrument was translated from...

Exploring How Usage-Focused Business Models Enable Circular Economy through Digital Technologies

Directory of Open Access Journals (Sweden)

Gianmarco Bressanelli

2018-02-01

Full Text Available Recent studies advocate that digital technologies are key enabling factors for the introduction of servitized business models. At the same time, these technologies support the implementation of the circular economy (CE paradigm into businesses. Despite this general agreement, the literature still overlooks how digital technologies enable such a CE transition. To fill the gap, this paper develops a conceptual framework, based on the literature and a case study of a company implementing a usage-focused servitized business model in the household appliance industry. This study focuses on the Internet of Things (IoT, Big Data, and analytics, and identifies eight specific functionalities enabled by such technologies (improving product design, attracting target customers, monitoring and tracking product activity, providing technical support, providing preventive and predictive maintenance, optimizing the product usage, upgrading the product, enhancing renovation and end-of-life activities. By investigating how these functionalities affect three CE value drivers (increasing resource efficiency, extending lifespan, and closing the loop, the conceptual framework developed in this paper advances knowledge about the role of digital technologies as an enabler of the CE within usage-focused business models. Finally, this study shows how digital technologies help overcome the drawback of usage-focused business models for the adoption of CE pointed out by previous literature.

Enhancing the Gaming Experience Using 3D Spatial User Interface Technologies.

Science.gov (United States)

Kulshreshth, Arun; Pfeil, Kevin; LaViola, Joseph J

2017-01-01

Three-dimensional (3D) spatial user interface technologies have the potential to make games more immersive and engaging and thus provide a better user experience. Although technologies such as stereoscopic 3D display, head tracking, and gesture-based control are available for games, it is still unclear how their use affects gameplay and if there are any user performance benefits. The authors have conducted several experiments on these technologies in game environments to understand how they affect gameplay and how we can use them to optimize the gameplay experience.

Key enabling technologies (Kets) observatory. Second report December 2015

OpenAIRE

Velde, Els van de; Pieterjan, Debergh; Wydra, Sven; Som, Oliver; Heide, Marcel de

2015-01-01

Key Enabling Technologies (KETs) provide the basis for innovation in a wide range of products and processes across all industrial sectors (emerging and traditional) and are essential to solve Europe’s major societal challenges. Six KETs have been identified as important for Europe’s future competitiveness: Advanced Manufacturing Technology, Advanced Materials, Nanotechnology, Micro- and Nanoelectronics, Industrial Biotechnology, and Photonics.

The Nuclear Energy Advanced Modeling and Simulation Enabling Computational Technologies FY09 Report

Energy Technology Data Exchange (ETDEWEB)

Diachin, L F; Garaizar, F X; Henson, V E; Pope, G

2009-10-12

In this document we report on the status of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) Enabling Computational Technologies (ECT) effort. In particular, we provide the context for ECT In the broader NEAMS program and describe the three pillars of the ECT effort, namely, (1) tools and libraries, (2) software quality assurance, and (3) computational facility (computers, storage, etc) needs. We report on our FY09 deliverables to determine the needs of the integrated performance and safety codes (IPSCs) in these three areas and lay out the general plan for software quality assurance to meet the requirements of DOE and the DOE Advanced Fuel Cycle Initiative (AFCI). We conclude with a brief description of our interactions with the Idaho National Laboratory computer center to determine what is needed to expand their role as a NEAMS user facility.

PMEL contributions to the collaboration: SCALING THE EARTH SYSTEM GRID TO PETASCALE DATA for the DOE SciDACs Earth System Grid Center for Enabling Technologies

Energy Technology Data Exchange (ETDEWEB)

Hankin, Steve

2012-06-01

Drawing to a close after five years of funding from DOE's ASCR and BER program offices, the SciDAC-2 project called the Earth System Grid (ESG) Center for Enabling Technologies has successfully established a new capability for serving data from distributed centers. The system enables users to access, analyze, and visualize data using a globally federated collection of networks, computers and software. The ESG software now known as the Earth System Grid Federation (ESGF) has attracted a broad developer base and has been widely adopted so that it is now being utilized in serving the most comprehensive multi-model climate data sets in the world. The system is used to support international climate model intercomparison activities as well as high profile U.S. DOE, NOAA, NASA, and NSF projects. It currently provides more than 25,000 users access to more than half a petabyte of climate data (from models and from observations) and has enabled over a 1,000 scientific publications.

From expert-derived user needs to user-perceived ease of use and usefulness: a two-phase mixed-methods evaluation framework.

Science.gov (United States)

Boland, Mary Regina; Rusanov, Alexander; So, Yat; Lopez-Jimenez, Carlos; Busacca, Linda; Steinman, Richard C; Bakken, Suzanne; Bigger, J Thomas; Weng, Chunhua

2014-12-01

Underspecified user needs and frequent lack of a gold standard reference are typical barriers to technology evaluation. To address this problem, this paper presents a two-phase evaluation framework involving usability experts (phase 1) and end-users (phase 2). In phase 1, a cross-system functionality alignment between expert-derived user needs and system functions was performed to inform the choice of "the best available" comparison system to enable a cognitive walkthrough in phase 1 and a comparative effectiveness evaluation in phase 2. During phase 2, five quantitative and qualitative evaluation methods are mixed to assess usability: time-motion analysis, software log, questionnaires - System Usability Scale and the Unified Theory of Acceptance of Use of Technology, think-aloud protocols, and unstructured interviews. Each method contributes data for a unique measure (e.g., time motion analysis contributes task-completion-time; software log contributes action transition frequency). The measures are triangulated to yield complementary insights regarding user-perceived ease-of-use, functionality integration, anxiety during use, and workflow impact. To illustrate its use, we applied this framework in a formative evaluation of a software called Integrated Model for Patient Care and Clinical Trials (IMPACT). We conclude that this mixed-methods evaluation framework enables an integrated assessment of user needs satisfaction and user-perceived usefulness and usability of a novel design. This evaluation framework effectively bridges the gap between co-evolving user needs and technology designs during iterative prototyping and is particularly useful when it is difficult for users to articulate their needs for technology support due to the lack of a baseline. Copyright © 2013 Elsevier Inc. All rights reserved.

Concept relation discovery and innovation enabling technology (CORDIET)

NARCIS (Netherlands)

Poelmans, J.; Elzinga, P.; Neznanov, A.; Viaene, S.; Kuznetsov, S.O.; Ignatov, D.; Dedene, G.

2011-01-01

Concept Relation Discovery and Innovation Enabling Technology (CORDIET), is a toolbox for gaining new knowledge from unstructured text data. At the core of CORDIET is the C-K theory which captures the essential elements of innovation. The tool uses Formal Concept Analysis (FCA), Emergent Self

Health and aged care enabled by information technology.

Science.gov (United States)

Soar, Jeffrey; Seo, Youngjoon

2007-10-01

One of the challenges facing health and welfare policymakers as well as researchers in most developed countries is the increasing demand for aging services and aged care. Low birth rates and rapid increases in the percentages of elderly people make aging and aged care one of the top-priority issues among the national agenda of many countries. The responses of governments have included initiatives to extend productive working lives and promote self-funded retirement; to promote healthy, active aging; and to encourage more care to be delivered in home and community settings. Technology will be a major enabler of these strategies. People requiring health services are increasingly being offered more care in their own homes and community settings as an alternative to hospital admission and to delay or avoid moving into institutional care. Research is providing intelligent technology to enable care in the home as well as to monitor safety, security, and quality. Innovation will provide greater independence and better access to care in their own homes for the elderly, sufferers of chronic illness, and persons with disability and reduce the incidence of hospital admissions and the length of stay when admissions do occur. Technologies will support families and professional caregivers and are expected to reduce costs. This paper reports on developments in technology to support care for the aged in home and community settings.

Enabling Technologies for Ultra-Safe and Secure Modular Nuclear Energy

International Nuclear Information System (INIS)

Mendez Cruz, Carmen Margarita; Rochau, Gary E.; Middleton, Bobby; Rodriguez, Salvador B.; Rodriguez, Carmelo; Schleicher, Robert

2016-01-01

Sandia National Laboratories and General Atomics are pleased to respond to the Advanced Research Projects Agency-Energy (ARPA-e)'s request for information on innovative developments that may overcome various current reactor-technology limitations. The RFI is particularly interested in innovations that enable ultra-safe and secure modular nuclear energy systems. Our response addresses the specific features for reactor designs called out in the RFI, including a brief assessment of the current state of the technologies that would enable each feature and the methods by which they could be best incorporated into a reactor design.

Enabling Technologies for Ultra-Safe and Secure Modular Nuclear Energy

Energy Technology Data Exchange (ETDEWEB)

Mendez Cruz, Carmen Margarita [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Rochau, Gary E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Middleton, Bobby [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Rodriguez, Salvador B. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Rodriguez, Carmelo [General Atomics, San Diego, CA (United States); Schleicher, Robert [General Atomics, San Diego, CA (United States)

2016-06-01

Sandia National Laboratories and General Atomics are pleased to respond to the Advanced Research Projects Agency-Energy (ARPA-e)’s request for information on innovative developments that may overcome various current reactor-technology limitations. The RFI is particularly interested in innovations that enable ultra-safe and secure modular nuclear energy systems. Our response addresses the specific features for reactor designs called out in the RFI, including a brief assessment of the current state of the technologies that would enable each feature and the methods by which they could be best incorporated into a reactor design.

User perceptions regarding sanitation technologies in South Africa

CSIR Research Space (South Africa)

Duncker, Louiza C

2014-09-01

Full Text Available , misuse/non-use and lack of proper maintenance, therefore placing the sustainability of these sanitation systems in question. Even if the technology was designed and built well, the use of the technology and its acceptance by the user proved to be the most...

A Classification Framework for Exploring Technology-Enabled Practice--Frame TEP

Science.gov (United States)

Prestridge, Sarah; de Aldama, Carlos

2016-01-01

This article theorizes the construction of a classification framework to explore teachers' beliefs and pedagogical practices for the use of digital technologies in the classroom. There are currently many individual schemas and models that represent both developmental and divergent concepts associated with technology-enabled practice. This article…

A portable grid-enabled computing system for a nuclear material study

International Nuclear Information System (INIS)

Tsujita, Yuichi; Arima, Tatsumi; Takekawa, Takayuki; Suzuki, Yoshio

2010-01-01

We have built a portable grid-enabled computing system specialized for our molecular dynamics (MD) simulation program to study Pu material easily. Experimental approach to reveal properties of Pu materials is often accompanied by some difficulties such as radiotoxicity of actinides. Since a computational approach reveals new aspects to researchers without such radioactive facilities, we address an MD computation. In order to have more realistic results about e.g., melting point or thermal conductivity, we need a large scale of parallel computations. Most of application users who don't have supercomputers in their institutes should use a remote supercomputer. For such users, we have developed the portable and secured grid-enabled computing system to utilize a grid computing infrastructure provided by Information Technology Based Laboratory (ITBL). This system enables us to access remote supercomputers in the ITBL system seamlessly from a client PC through its graphical user interface (GUI). Typically it enables seamless file accesses on the GUI. Furthermore monitoring of standard output or standard error is available to see progress of an executed program. Since the system provides fruitful functionalities which are useful for parallel computing on a remote supercomputer, application users can concentrate on their researches. (author)

Users' attitude towards science and technology database system : INIS user needs survey

International Nuclear Information System (INIS)

Fukazawa, Takeyasu; Takahashi, Satoko; Yonezawa, Minoru; Kajiro, Tadashi; Mineo, Yukinobu; Habara, Takako; Komatsubara, Yasutoshi; Hiramatsu, Nobuaki; Habara, Tadashi.

1995-01-01

The International Nuclear Information System (INIS) is the world's leading information system on the peaceful use of nuclear energy which is being operated by the International Atomic Energy Agency (IAEA) in collaboration with its member-states and other international organizations. After more than 20 years of the operation of INIS, a user needs survey was conducted with the aim of assisting the INIS Secretariat to decide which way INIS should go. This report describes users' attitude towards that system on the basis of the conclusions drawn from the questionnaires sent out to the users by the Japan Atomic Energy Research Institute, the INIS national center in Japan, in close collaboration with the Japan Information Center of Science and Technology. (author)

The effect of technology-enabled active learning on undergraduate students understanding of electromagnetism

International Nuclear Information System (INIS)

Dori, Y.J.

2005-01-01

Full Text:The Technology-Enabled Active Learning Project at the Massachusetts Institute of Technology (MIT) involves media-rich software for simulation and visualization in freshman physics carried out in a specially redesigned classroom to facilitate group interaction. These technology-based learning materials are especially useful in electromagnetism to help students conceptualize phenomena and processes. This study analyzes the effects of the unique learning environment of the Technology-Enabled Active Learning Project project on students cognitive and affective outcomes. The assessment of the project included examining students conceptual understanding before and after studying electromagnetism in a media-rich environment. We also investigated the effect of this environment on students preferences regarding the various teaching methods. As part of the project, we developed pre- and post-tests consisting of conceptual questions from standardized tests, as well as questions designed to assess the effect of visualizations and experiments. The research population consisted of 811 undergraduate students. It consisted of a small- and a large-scale experimental groups and a control group. Technology-Enabled Active Learning Project students improved their conceptual understanding concepts of the subject matter to a significantly higher extent than their control group peers. A majority of the students in the small-scale experiment noted that they would recommend the Technology-Enabled Active Learning Project course to fellow students, indicating the benefits of inter activity, visualization, and hands-on experiments, which the technology helped enable. In the large-scale implementation students expressed both positive and negative attitudes in the course survey

ENABLING SMART MANUFACTURING TECHNOLOGIES FOR DECISION-MAKING SUPPORT

Science.gov (United States)

Helu, Moneer; Libes, Don; Lubell, Joshua; Lyons, Kevin; Morris, KC

2017-01-01

Smart manufacturing combines advanced manufacturing capabilities and digital technologies throughout the product lifecycle. These technologies can provide decision-making support to manufacturers through improved monitoring, analysis, modeling, and simulation that generate more and better intelligence about manufacturing systems. However, challenges and barriers have impeded the adoption of smart manufacturing technologies. To begin to address this need, this paper defines requirements for data-driven decision making in manufacturing based on a generalized description of decision making. Using these requirements, we then focus on identifying key barriers that prevent the development and use of data-driven decision making in industry as well as examples of technologies and standards that have the potential to overcome these barriers. The goal of this research is to promote a common understanding among the manufacturing community that can enable standardization efforts and innovation needed to continue adoption and use of smart manufacturing technologies. PMID:28649678

Distributed Collaborative Learning Communities Enabled by Information Communication Technology

NARCIS (Netherlands)

H.L. Alvarez (Heidi Lee)

2006-01-01

textabstractHow and why can Information Communication Technology (ICT) contribute to enhancing learning in distributed Collaborative Learning Communities (CLCs)? Drawing from relevant theories concerned with phenomenon of ICT enabled distributed collaborative learning, this book identifies gaps in

Virtual Laboratory Enabling Collaborative Research in Applied Vehicle Technologies

Science.gov (United States)

Lamar, John E.; Cronin, Catherine K.; Scott, Laura E.

2005-01-01

The virtual laboratory is a new technology, based on the internet, that has had wide usage in a variety of technical fields because of its inherent ability to allow many users to participate simultaneously in instruction (education) or in the collaborative study of a common problem (real-world application). The leadership in the Applied Vehicle Technology panel has encouraged the utilization of this technology in its task groups for some time and its parent organization, the Research and Technology Agency, has done the same for its own administrative use. This paper outlines the application of the virtual laboratory to those fields important to applied vehicle technologies, gives the status of the effort, and identifies the benefit it can have on collaborative research. The latter is done, in part, through a specific example, i.e. the experience of one task group.

Development of Beam Utilization Technologies and Support for Users

International Nuclear Information System (INIS)

Kim, Kyeryung; Jung, Myunghwan; Noh, Yongoh; Lee, Sooyeon; Kim, Hyukwook; Kil, Jaekeun; Lee, Nayoung; Ra, Sekin; Lee, Miejeen; Kim, Sora

2013-02-01

The Final goals are to achieve the 2nd goals of the Proton Engineering Frontier Project, development of proton beam utilization technologies, to incubate the potential users, and to develop fundamental technologies. Based on these achievements, we are going to enhance the accelerator utilization and maximize contribution to the local society after accelerator construction completion. For the these goals, we were operating user program reflecting the results of 3rd step planning. We support 38 small projects during 2 years. As results of activation of beam utilization, we acquired 768 users at the end of 2012. We survey proton beam technology proposals, individuals and institutions participation letter of intent through the research of 'Planning of a support program for both basic research by using accelerator and manpower cultivation'. And inaugurated KOPUA (Korea Proton Accelerator User Association) on March 28, 2012 with 152 members. We secured experimental conditions at TR23 and TR103 and reflected in the target room design and operation scenarios via investigate the requirements. Through these requirements, we make a remote sample transfer system, beam regulating system, hot cell and sample transport container. Moreover, we develop proton beam technologies such as in-vivo proton beam irradiation system, comparison of the biological effects for pulse beam and continuous beam, basic experiments for the metal nanopaticle synthesis, research for radioactivatied samples and devices, conceptual design and calculation for neutron source target and calculation of the isotope production yield. Proton accelerator can be utilized in a variety of field, including NT, BT, IT, ST, ET, Nuclear, medical, and some of the user facilities required were constructed through this project, Experience for the construction and operation of these facilities can be reflected to the construction of the rest 8 target room of proton accelerator center

Enabling technologies for industrial energy demand management

International Nuclear Information System (INIS)

Dyer, Caroline H.; Hammond, Geoffrey P.; Jones, Craig I.; McKenna, Russell C.

2008-01-01

This state-of-science review sets out to provide an indicative assessment of enabling technologies for reducing UK industrial energy demand and carbon emissions to 2050. In the short term, i.e. the period that will rely on current or existing technologies, the road map and priorities are clear. A variety of available technologies will lead to energy demand reduction in industrial processes, boiler operation, compressed air usage, electric motor efficiency, heating and lighting, and ancillary uses such as transport. The prospects for the commercial exploitation of innovative technologies by the middle of the 21st century are more speculative. Emphasis is therefore placed on the range of technology assessment methods that are likely to provide policy makers with a guide to progress in the development of high-temperature processes, improved materials, process integration and intensification, and improved industrial process control and monitoring. Key among the appraisal methods applicable to the energy sector is thermodynamic analysis, making use of energy, exergy and 'exergoeconomic' techniques. Technical and economic barriers will limit the improvement potential to perhaps a 30% cut in industrial energy use, which would make a significant contribution to reducing energy demand and carbon emissions in UK industry. Non-technological drivers for, and barriers to, the take-up of innovative, low-carbon energy technologies for industry are also outlined

Do 'enabling technologies' affect customer performance in price-responsive load programs?

International Nuclear Information System (INIS)

Goldman, Charles A.; Kintner-Meyer, Michael; Heffner, Grayson

2002-01-01

Price-responsive load (PRL) programs vary significantly in overall design, the complexity of relationships between program administrators, load aggregators, and customers, and the availability of ''enabling technologies''. Enabling technologies include such features as web-based power system and price monitoring, control and dispatch of curtailable loads, communications and information systems links to program participants, availability of interval metering data to customers in near real time, and building/facility/end-use automation and management capabilities. Two state agencies - NYSERDA in New York and the CEC in California - have been conspicuous leaders in the demonstration of demand response (DR) programs utilizing enabling technologies. In partnership with key stakeholders in these two states (e.g., grid operator, state energy agencies, and program administrators), Lawrence Berkeley National Laboratory (LBNL) and Pacific Northwest National Laboratory (PNNL) surveyed 56 customers who worked with five contractors participating in CEC or NYSERDA-sponsored DR programs. We combined market research and actual load curtailment data when available (i.e., New York) or customer load reduction targets in order to explore the relative importance of contractor's program design features, sophistication of control strategies, and reliance on enabling technologies in predicting customer's ability to deliver load reductions in DR programs targeted to large commercial/industrial customers. We found preliminary evidence that DR enabling technology has a positive effect on load curtailment potential. Many customers indicated that web-based energy information tools were useful for facilitating demand response (e.g., assessing actual performance compared to load reduction contract commitments), that multiple notification channels facilitated timely response, and that support for and use of backup generation allowed customers to achieve significant and predictable load

VACET: Proposed SciDAC2 Visualization and Analytics Center for Enabling Technologies

International Nuclear Information System (INIS)

Bethel, W; Johnson, C; Hansen, C; Parker, S; Sanderson, A; Silva, C; Tricoche, X; Pascucci, V; Childs, H; Cohen, J; Duchaineau, M; Laney, D; Lindstrom, P; Ahern, S; Meredith, J; Ostrouchov, G; Joy, K; Hamann, B

2006-01-01

This project focuses on leveraging scientific visualization and analytics software technology as an enabling technology for increasing scientific productivity and insight. Advances in computational technology have resulted in an 'information big bang',' which in turn has created a significant data understanding challenge. This challenge is widely acknowledged to be one of the primary bottlenecks in contemporary science. The vision for our Center is to respond directly to that challenge by adapting, extending, creating when necessary and deploying visualization and data understanding technologies for our science stakeholders. Using an organizational model as a Visualization and Analytics Center for Enabling Technologies (VACET), we are well positioned to be responsive to the needs of a diverse set of scientific stakeholders in a coordinated fashion using a range of visualization, mathematics, statistics, computer and computational science and data management technologies

Designing Technology-Enabled Instruction to Utilize Learning Analytics

Science.gov (United States)

Davies, Randall; Nyland, Robert; Bodily, Robert; Chapman, John; Jones, Brian; Young, Jay

2017-01-01

A key notion conveyed by those who advocate for the use of data to enhance instruction is an awareness that learning analytics has the potential to improve instruction and learning but is not currently reaching that potential. Gibbons (2014) suggested that a lack of learning facilitated by current technology-enabled instructional systems may be…

CMOS technology: a critical enabler for free-form electronics-based killer applications

Science.gov (United States)

Hussain, Muhammad M.; Hussain, Aftab M.; Hanna, Amir

2016-05-01

Complementary metal oxide semiconductor (CMOS) technology offers batch manufacturability by ultra-large-scaleintegration (ULSI) of high performance electronics with a performance/cost advantage and profound reliability. However, as of today their focus has been on rigid and bulky thin film based materials. Their applications have been limited to computation, communication, display and vehicular electronics. With the upcoming surge of Internet of Everything, we have critical opportunity to expand the world of electronics by bridging between CMOS technology and free form electronics which can be used as wearable, implantable and embedded form. The asymmetry of shape and softness of surface (skins) in natural living objects including human, other species, plants make them incompatible with the presently available uniformly shaped and rigidly structured today's CMOS electronics. But if we can break this barrier then we can use the physically free form electronics for applications like plant monitoring for expansion of agricultural productivity and quality, we can find monitoring and treatment focused consumer healthcare electronics - and many more creative applications. In our view, the fundamental challenge is to engage the mass users to materialize their creative ideas. Present form of electronics are too complex to understand, to work with and to use. By deploying game changing additive manufacturing, low-cost raw materials, transfer printing along with CMOS technology, we can potentially stick high quality CMOS electronics on any existing objects and embed such electronics into any future objects that will be made. The end goal is to make them smart to augment the quality of our life. We use a particular example on implantable electronics (brain machine interface) and its integration strategy enabled by CMOS device design and technology run path.

The Role of Technology as an Enabler in Job Redesign

Directory of Open Access Journals (Sweden)

David M. Savino

2009-10-01

Full Text Available This paper is an acknowledgement of the role of technology as an enabler that encourages the constant need to evaluate, update and employ changing job descriptions and business processes that truly acknowledge job requirements as they are versus notions of what they have been or should be. Advancements in technology have brought about a significant amount of change in terms of how we go about doing our daily work. The evolution from being a manufacturing economy to being information and service based brought to the workplace new realities and responsibilities. As a result, workers can no longer expect to be given a specific listing of assigned duties and tasks that remain fixed over a long period of time. The new paradigm in the workplace relies on continuous demands for improvement and acquired knowledge in a dynamic environment. The catalyst that enables continuous improvement is technology.

NFC-Based User Interface for Smart Environments

OpenAIRE

Susanna Spinsante; Ennio Gambi

2015-01-01

The physical support of a home automation system, joined with a simplified user-system interaction modality, may allow people affected by motor impairments or limitations, such as elderly and disabled people, to live safely and comfortably at home, by improving their autonomy and facilitating the execution of daily life tasks. The proposed solution takes advantage of the Near Field Communications technology, which is simple and intuitive to use, to enable advanced user interaction. The user c...

User research & technology, pt.2

CERN Document Server

Greifeneder, Elke

2011-01-01

This e-book is Part 2 on the theme "User Research and Technology". The research covers the testing of online digital library resources using various methods. Library and information science as a field is changing and the requirements for top quality research are growing more stringent. This is typical of the experience of other professional fields as they have moved from practitioners advising practitioners to researchers building on past results. This e-book contains 12 papers on this theme.

Imagining value, imagining users: academic technology transfer for health innovation.

Science.gov (United States)

Miller, Fiona Alice; Sanders, Carrie B; Lehoux, Pascale

2009-04-01

Governments have invested heavily in the clinical and economic promise of health innovation and express increasing concern with the efficacy and efficiency of the health innovation system. In considering strategies for 'better' health innovation, policy makers and researchers have taken a particular interest in the work of universities and related public research organizations: How do these organizations identify and transfer promising innovations to market, and do these efforts make best use of public sector investments? We conducted an ethnographic study of technology transfer offices (TTOs) in Ontario and British Columbia, Canada, to consider the place of health and health system imperatives in judgments of value in early-stage health innovation. Our analysis suggests that the valuation process is poorly specified as a set of task-specific judgments. Instead, we argue that technology transfer professionals are active participants in the construction of the innovation and assign value by 'imagining' the end product in its 'context of use'. Oriented as they are to the commercialization of health technology, TTOs understand users primarily as market players. The immediate users of TTOs' efforts are commercial partners (i.e., licensees, investors) who are capable of translating current discoveries into future commodities. The ultimate end users - patients, clinicians, health systems - are the future consumers of the products to be sold. Attention to these proximate and more distal users in the valuation process is a complex and constitutive feature of the work of health technology transfer. At the same time, judgements about individual technologies are made in relation to a broader imperative through which TTOs seek to imagine and construct sustainable innovation systems. Judgments of value are rendered sensible in relation to the logic of valuation for systems of innovation that, in turn, configure users of health innovation in systemic ways.

Earthdata Search: How Usability Drives Innovation To Enable A Broad User Base

Science.gov (United States)

Reese, M.; Siarto, J.; Lynnes, C.; Shum, D.

2017-12-01

Earthdata Search (https://search.earthdata.nasa.gov) is a modern web application allowing users to search, discover, visualize, refine, and access NASA Earth Observation data using a wide array of service offerings. Its goal is to ease the technical burden on data users by providing a high-quality application that makes it simple to interact with NASA Earth observation data, freeing them to spend more effort on innovative endeavors. This talk would detail how we put end users first in our design and development process, focusing on usability and letting usability needs drive requirements for the underlying technology. Just a few examples of how this plays out practically, Earthdata Search teams with a lightning fast metadata repository, allowing it to be an extremely responsive UI that updates as the user changes criteria not only at the dataset level, but also at the file level. This results in a better exploration experience as the time penalty is greatly reduced. Also, since Earthdata Search uses metadata from over 35,000 datasets that are managed by different data providers, metadata standards, quality and consistency will vary. We found that this was negatively impacting users' search and exploration experience. We have resolved this problem with the introduction of "humanizers", which is a community-driven process to both "smooth out" metadata values and provide non-jargonistic representations of some content within the Earthdata Search UI. This is helpful for both the experience data scientist and our users that are brand new to the discipline.

Miniaturized Power Processing Unit Study: A Cubesat Electric Propulsion Technology Enabler Project

Science.gov (United States)

Ghassemieh, Shakib M.

2014-01-01

This study evaluates High Voltage Power Processing Unit (PPU) technology and driving requirements necessary to enable the Microfluidic Electric Propulsion technology research and development by NASA and university partners. This study provides an overview of the state of the art PPU technology with recommendations for technology demonstration projects and missions for NASA to pursue.

Particle-Reinforced Aluminum Matrix Composites (AMCs—Selected Results of an Integrated Technology, User, and Market Analysis and Forecast

Directory of Open Access Journals (Sweden)

Anja Schmidt

2018-02-01

Full Text Available The research and development of new materials such as particle-reinforced aluminum matrix composites (AMCs will only result in a successful innovation if these materials show significant advantages not only from a technological, but also from an economic point of view. Against this background, in the Collaborative Research Center SFB 692, the concept of an integrated technology, user, and market analysis and forecast has been developed as a means for assessing the technological and commercial potential of new materials in early life cycle stages. After briefly describing this concept, it is applied to AMCs and the potential field of manufacturing aircraft components. Results show not only technological advances, but also considerable economic potential—the latter one primarily resulting from the possible weight reduction being enabled by the increased yield strength of the new material.

Colorado Late Cenozoic Fault and Fold Database and Internet Map Server: User-friendly technology for complex information

Science.gov (United States)

Morgan, K.S.; Pattyn, G.J.; Morgan, M.L.

2005-01-01

Internet mapping applications for geologic data allow simultaneous data delivery and collection, enabling quick data modification while efficiently supplying the end user with information. Utilizing Web-based technologies, the Colorado Geological Survey's Colorado Late Cenozoic Fault and Fold Database was transformed from a monothematic, nonspatial Microsoft Access database into a complex information set incorporating multiple data sources. The resulting user-friendly format supports easy analysis and browsing. The core of the application is the Microsoft Access database, which contains information compiled from available literature about faults and folds that are known or suspected to have moved during the late Cenozoic. The database contains nonspatial fields such as structure type, age, and rate of movement. Geographic locations of the fault and fold traces were compiled from previous studies at 1:250,000 scale to form a spatial database containing information such as length and strike. Integration of the two databases allowed both spatial and nonspatial information to be presented on the Internet as a single dataset (http://geosurvey.state.co.us/pubs/ceno/). The user-friendly interface enables users to view and query the data in an integrated manner, thus providing multiple ways to locate desired information. Retaining the digital data format also allows continuous data updating and quick delivery of newly acquired information. This dataset is a valuable resource to anyone interested in earthquake hazards and the activity of faults and folds in Colorado. Additional geologic hazard layers and imagery may aid in decision support and hazard evaluation. The up-to-date and customizable maps are invaluable tools for researchers or the public.

Customizing graphical user interface technology for spacecraft control centers

Science.gov (United States)

Beach, Edward; Giancola, Peter; Gibson, Steven; Mahmot, Ronald

1993-01-01

The Transportable Payload Operations Control Center (TPOCC) project is applying the latest in graphical user interface technology to the spacecraft control center environment. This project of the Mission Operations Division's (MOD) Control Center Systems Branch (CCSB) at NASA Goddard Space Flight Center (GSFC) has developed an architecture for control centers which makes use of a distributed processing approach and the latest in Unix workstation technology. The TPOCC project is committed to following industry standards and using commercial off-the-shelf (COTS) hardware and software components wherever possible to reduce development costs and to improve operational support. TPOCC's most successful use of commercial software products and standards has been in the development of its graphical user interface. This paper describes TPOCC's successful use and customization of four separate layers of commercial software products to create a flexible and powerful user interface that is uniquely suited to spacecraft monitoring and control.

Methods and tools in user-centred design for information technology

CERN Document Server

Galer, Margaret; Ziegler, J; Galer, Mark

1992-01-01

This book is concerned with the development of human factorsinputs to software design. The aim is to create products whichmatch the requirements and characteristics of users and whichoffer usable user interfaces. The HUFIT project - Human Factorsin Information Technology - was carried out within the EuropeanStrategic Programme for Research and Development in InformationTechnology (ESPRIT) with the objective of enhancing the qualityof software design within the European Community. The variety ofactivities undertaken to achieve this goal are reflected in thisbook. It describes human factors know

PACFEST 2004 : enabling technologies for maritime security in the Pacific region.

Energy Technology Data Exchange (ETDEWEB)

Moore, Judy Hennessey; Whitley, John B.; Chellis, Craig (Pacific Disaster Center, Kihei, HI)

2005-06-01

In October of 2003 experts involved in various aspects of homeland security from the Pacific region met to engage in a free-wheeling discussion and brainstorming (a 'fest') on the role that technology could play in winning the war on terrorism in the Pacific region. The result was a concise and relatively thorough definition of the terrorism problem in the Pacific region, emphasizing the issues unique to Island nations in the Pacific setting, along with an action plan for developing working demonstrations of advanced technological solutions to these issues. Since PacFest 2003, the maritime dimensions of the international security environment have garnered increased attention and interest. To this end, PacFest 2004 sought to identify gaps and enabling technologies for maritime domain awareness and responsive decision-making in the Asia-Pacific region. The PacFest 2004 participants concluded that the technologies and basic information building blocks exist to create a system that would enable the Pacific region government and private organizations to effectively collaborate and share their capabilities and information concerning maritime security. The proposed solution summarized in this report integrates national environments in real time, thereby enabling effective prevention and first response to natural and terrorist induced disasters through better use of national and regional investments in people, infrastructure, systems, processes and standards.

CMOS technology: a critical enabler for free-form electronics-based killer applications

KAUST Repository

Hussain, Muhammad Mustafa

2016-05-17

Complementary metal oxide semiconductor (CMOS) technology offers batch manufacturability by ultra-large-scaleintegration (ULSI) of high performance electronics with a performance/cost advantage and profound reliability. However, as of today their focus has been on rigid and bulky thin film based materials. Their applications have been limited to computation, communication, display and vehicular electronics. With the upcoming surge of Internet of Everything, we have critical opportunity to expand the world of electronics by bridging between CMOS technology and free form electronics which can be used as wearable, implantable and embedded form. The asymmetry of shape and softness of surface (skins) in natural living objects including human, other species, plants make them incompatible with the presently available uniformly shaped and rigidly structured today’s CMOS electronics. But if we can break this barrier then we can use the physically free form electronics for applications like plant monitoring for expansion of agricultural productivity and quality, we can find monitoring and treatment focused consumer healthcare electronics – and many more creative applications. In our view, the fundamental challenge is to engage the mass users to materialize their creative ideas. Present form of electronics are too complex to understand, to work with and to use. By deploying game changing additive manufacturing, low-cost raw materials, transfer printing along with CMOS technology, we can potentially stick high quality CMOS electronics on any existing objects and embed such electronics into any future objects that will be made. The end goal is to make them smart to augment the quality of our life. We use a particular example on implantable electronics (brain machine interface) and its integration strategy enabled by CMOS device design and technology run path. © (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is

Enabling a systems biology knowledgebase with gaggle and firegoose

Energy Technology Data Exchange (ETDEWEB)

Baliga, Nitin S. [Institute for Systems Biology, Seattle, WA (United States)

2014-12-12

The overall goal of this project was to extend the existing Gaggle and Firegoose systems to develop an open-source technology that runs over the web and links desktop applications with many databases and software applications. This technology would enable researchers to incorporate workflows for data analysis that can be executed from this interface to other online applications. The four specific aims were to (1) provide one-click mapping of genes, proteins, and complexes across databases and species; (2) enable multiple simultaneous workflows; (3) expand sophisticated data analysis for online resources; and enhance open-source development of the Gaggle-Firegoose infrastructure. Gaggle is an open-source Java software system that integrates existing bioinformatics programs and data sources into a user-friendly, extensible environment to allow interactive exploration, visualization, and analysis of systems biology data. Firegoose is an extension to the Mozilla Firefox web browser that enables data transfer between websites and desktop tools including Gaggle. In the last phase of this funding period, we have made substantial progress on development and application of the Gaggle integration framework. We implemented the workspace to the Network Portal. Users can capture data from Firegoose and save them to the workspace. Users can create workflows to start multiple software components programmatically and pass data between them. Results of analysis can be saved to the cloud so that they can be easily restored on any machine. We also developed the Gaggle Chrome Goose, a plugin for the Google Chrome browser in tandem with an opencpu server in the Amazon EC2 cloud. This allows users to interactively perform data analysis on a single web page using the R packages deployed on the opencpu server. The cloud-based framework facilitates collaboration between researchers from multiple organizations. We have made a number of enhancements to the cmonkey2 application to enable and

Elckerlyc goes mobile: enabling technology for ECAs in mobile applications

NARCIS (Netherlands)

Klaassen, Randy; Hendrix, J.; Reidsma, Dennis; op den Akker, Hendrikus J.A.

2012-01-01

The fast growth of computational resources and speech technology available on mobile devices makes it pos- sible for users of these devices to interact with service sys- tems through natural dialogue. These systems are sometimes perceived as social agents and presented by means of an animated

Adapting the Wii Fit Balance Board to Enable Active Video Game Play by Wheelchair Users: User-Centered Design and Usability Evaluation.

Science.gov (United States)

Thirumalai, Mohanraj; Kirkland, William B; Misko, Samuel R; Padalabalanarayanan, Sangeetha; Malone, Laurie A

2018-03-06

of the controller, enabling stable and safe game play; and (3) included a sensitivity control feature, allowing users to fine-tune the controller to match the users' range of COB motion. More than half the sample could not use the OTS version of the Wii Fit Balance Board, while all participants were able to use the adapted version. All participants rated the adapted Wii Fit Balance Board at a minimum as "good," while those who could not use the OTS Wii Fit Balance Board rated the adapted Wii Fit Balance Board as "excellent." We found a significant negative correlation between lower-extremity function and differences between OTS and adapted SUS scores, indicating that as lower-extremity function decreased, participants perceived the adapted Wii Fit Balance Board as more usable. This study demonstrated a successful adaptation of a widely used AVG controller. The adapted controller's potential to increase physical activity levels among people with mobility impairments will be evaluated in a subsequent trial. ClinicalTrials.gov NCT02994199; https://clinicaltrials.gov/ct2/show/NCT02994199 (Archived by WebCite at http://www.webcitation.org/6xWTyiJWf). ©Mohanraj Thirumalai, William B Kirkland, Samuel R Misko, Sangeetha Padalabalanarayanan, Laurie A Malone. Originally published in JMIR Rehabilitation and Assistive Technology (http://rehab.jmir.org), 06.03.2018.

The VERCE Science Gateway: Enabling User Friendly HPC Seismic Wave Simulations.

Science.gov (United States)

Casarotti, E.; Spinuso, A.; Matser, J.; Leong, S. H.; Magnoni, F.; Krause, A.; Garcia, C. R.; Muraleedharan, V.; Krischer, L.; Anthes, C.

2014-12-01

The EU-funded project VERCE (Virtual Earthquake and seismology Research Community in Europe) aims to deploy technologies which satisfy the HPC and data-intensive requirements of modern seismology.As a result of VERCE official collaboration with the EU project SCI-BUS, access to computational resources, like local clusters and international infrastructures (EGI and PRACE), is made homogeneous and integrated within a dedicated science gateway based on the gUSE framework. In this presentation we give a detailed overview on the progress achieved with the developments of the VERCE Science Gateway, according to a use-case driven implementation strategy. More specifically, we show how the computational technologies and data services have been integrated within a tool for Seismic Forward Modelling, whose objective is to offer the possibility to performsimulations of seismic waves as a service to the seismological community.We will introduce the interactive components of the OGC map based web interface and how it supports the user with setting up the simulation. We will go through the selection of input data, which are either fetched from federated seismological web services, adopting community standards, or provided by the users themselves by accessing their own document data store. The HPC scientific codes can be selected from a number of waveform simulators, currently available to the seismological community as batch tools or with limited configuration capabilities in their interactive online versions.The results will be staged out via a secure GridFTP transfer to a VERCE data layer managed by iRODS. The provenance information of the simulation will be automatically cataloged by the data layer via NoSQL techonologies.Finally, we will show the example of how the visualisation output of the gateway could be enhanced by the connection with immersive projection technology at the Virtual Reality and Visualisation Centre of Leibniz Supercomputing Centre (LRZ).

User Requirements for Technology to Assist Aging in Place: Qualitative Study of Older People and Their Informal Support Networks.

Science.gov (United States)

Elers, Phoebe; Hunter, Inga; Whiddett, Dick; Lockhart, Caroline; Guesgen, Hans; Singh, Amardeep

2018-06-06

Informal support is essential for enabling many older people to age in place. However, there is limited research examining the information needs of older adults' informal support networks and how these could be met through home monitoring and information and communication technologies. The purpose of this study was to investigate how technologies that connect older adults to their informal and formal support networks could assist aging in place and enhance older adults' health and well-being. Semistructured interviews were conducted with 10 older adults and a total of 31 members of their self-identified informal support networks. They were asked questions about their information needs and how technology could support the older adults to age in place. The interviews were transcribed and thematically analyzed. The analysis identified three overarching themes: (1) the social enablers theme, which outlined how timing, informal support networks, and safety concerns assist the older adults' uptake of technology, (2) the technology concerns theme, which outlined concerns about cost, usability, information security and privacy, and technology superseding face-to-face contact, and (3) the information desired theme, which outlined what information should be collected and transferred and who should make decisions about this. Older adults and their informal support networks may be receptive to technology that monitors older adults within the home if it enables aging in place for longer. However, cost, privacy, security, and usability barriers would need to be considered and the system should be individualizable to older adults' changing needs. The user requirements identified from this study and described in this paper have informed the development of a technology that is currently being prototyped. ©Phoebe Elers, Inga Hunter, Dick Whiddett, Caroline Lockhart, Hans Guesgen, Amardeep Singh. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 06.06.2018.

User centric monitoring (UCM) information service for the next generation of Grid-enabled scientists

International Nuclear Information System (INIS)

Alexander, D A; Li, C; Lauret, J; Fine, V

2008-01-01

Nuclear and high-energy physicists routinely execute data processing and data analysis jobs on a Grid and need to be able to easily and remotely monitor the execution of these jobs. Existing Grid monitoring tools provide abundant information about the whole system, but are geared towards production jobs and well suited for Grid administrators, while the information tailored towards an individual user is not readily available in a user-friendly and user-centric way. Such User Centric information includes monitoring information such as the status of the submitted job, queue position, time of the start/finish, percentage of being done, error messages, standard output, and reasons for failure. We proposed to develop a framework based on Grid service technology that allows scientists to track and monitor their jobs easily from a user-centric view. The proposed framework aims to be flexible so that it can be applied by any Grid Virtual Organization (VO) with various ways of collecting the user-centric job monitoring information built into the framework. Furthermore, the framework provides a rich and reusable set of methods of presenting the information to the user from within a Web browser and other clients. In this presentation, we will give an architectural overview of the UCM service, show an example implementation in the RHIC/STAR experiment context and discuss limitations and future collaborative work

User centric monitoring (UCM) information service for the next generation of Grid-enabled scientists

Energy Technology Data Exchange (ETDEWEB)

Alexander, D A; Li, C [Tech-X Corporation, 5621 Arapahoe Avenue Suite A, Boulder, CO 80303 (United States); Lauret, J; Fine, V [Physics Department, Brookhaven National Laboratory, Upton, NY 11973 (United States)], E-mail: alexanda@txcorp.com

2008-07-15

Nuclear and high-energy physicists routinely execute data processing and data analysis jobs on a Grid and need to be able to easily and remotely monitor the execution of these jobs. Existing Grid monitoring tools provide abundant information about the whole system, but are geared towards production jobs and well suited for Grid administrators, while the information tailored towards an individual user is not readily available in a user-friendly and user-centric way. Such User Centric information includes monitoring information such as the status of the submitted job, queue position, time of the start/finish, percentage of being done, error messages, standard output, and reasons for failure. We proposed to develop a framework based on Grid service technology that allows scientists to track and monitor their jobs easily from a user-centric view. The proposed framework aims to be flexible so that it can be applied by any Grid Virtual Organization (VO) with various ways of collecting the user-centric job monitoring information built into the framework. Furthermore, the framework provides a rich and reusable set of methods of presenting the information to the user from within a Web browser and other clients. In this presentation, we will give an architectural overview of the UCM service, show an example implementation in the RHIC/STAR experiment context and discuss limitations and future collaborative work.

How additive manufacturing enables more sustainable end-user maintenance, repair and overhaul (MRO) strategies

NARCIS (Netherlands)

Wits, Wessel Willems; Reyes Garcia, José Roberto; Jauregui Becker, Juan Manuel

2016-01-01

This paper projects how Maintenance, Repair and Overhaul (MRO) strategies can be optimized to the specific needs of end-users using Additive Manufacturing (AM) technologies. AM can significantly reduce the design and production times for customized parts. This leads to key advantages for MRO

Broadband integrated mid infrared light sources as enabling technology for point of care mid-infrared spectroscopy

Science.gov (United States)

2017-08-20

AFRL-AFOSR-JP-TR-2017-0061 Broadband integrated mid-infrared light sources as enabling technology for point-of-care mid- infrared spectroscopy Alex...mid-infrared light sources as enabling technology for point-of-care mid-infrared spectroscopy 5a.  CONTRACT NUMBER 5b.  GRANT NUMBER FA2386-16-1-4037...Broadband integrated mid-infrared light sources as enabling technology for point-of-care mid- infrared spectroscopy ” Date: 16th August 2017 Name

Enabling fast charging – A battery technology gap assessment

Energy Technology Data Exchange (ETDEWEB)

Ahmed, Shabbir; Bloom, Ira; Jansen, Andrew N.; Tanim, Tanvir; Dufek, Eric J.; Pesaran, Ahmad; Burnham, Andrew; Carlson, Richard B.; Dias, Fernando; Hardy, Keith; Keyser, Matthew; Kreuzer, Cory; Markel, Anthony; Meintz, Andrew; Michelbacher, Christopher; Mohanpurkar, Manish; Nelson, Paul A.; Robertson, David C.; Scoffield, Don; Shirk, Matthew; Stephens, Thomas; Vijayagopal, Ram; Zhang, Jiucai

2017-11-01

The battery technology literature is reviewed, with an emphasis on key elements that limit extreme fast charging. Key gaps in existing elements of the technology are presented as well as developmental needs. Among these needs are advanced models and methods to detect and prevent lithium plating; new positive-electrode materials which are less prone to stress-induced failure; better electrode designs to accommodate very rapid diffusion in and out of the electrode; measure temperature distributions during fast charge to enable / validate models; and develop thermal management and pack designs to accommodate the higher operating voltage.

Multi-dimensional technology-enabled social learning approach

DEFF Research Database (Denmark)

Petreski, Hristijan; Tsekeridou, Sofia; Prasad, Neeli R.

2013-01-01

’t respond to this systemic and structural changes and/or challenges and retains its status quo than it is jeopardizing its own existence or the existence of the education, as we know it. This paper aims to precede one step further by proposing a multi-dimensional approach for technology-enabled social...... in learning while socializing within their learning communities. However, their “educational” usage is still limited to facilitation of online learning communities and to collaborative authoring of learning material complementary to existing formal (e-) learning services. If the educational system doesn...

The user's view of commercially available medical technology

Science.gov (United States)

Harrison, D. C.

1975-01-01

The potential user of new medical equipment for imaging the cardiovascular system is often faced with the problem of deciding whether or not to accept a new piece of equipment or a new technological concept into the practice of cardiology. Considerations for acquiring new medical technology are discussed in some detail. Acquisition of new technology should depend on whether the equipment provides more and relevant clinical data, is for research or for limited use, is properly engineered for patient use, presents information in easily storable and retrievable form, is tested and validated clinically, is fabricated by a reliable manufacturer, is cost effective, and may be readily replaced by a new technology.

User Decisions Among Digital Piracy and Legal Alternatives for Film and Music

DEFF Research Database (Denmark)

Veitch, Robert; Constantiou, Ioanna

2012-01-01

Technologies enabling digital piracy have expanded the variety of modes available to users when deciding how to access film and music. We examine user decisions in context, investigating which factors influence the decision to use traditional or new legal options over piracy. Our study contributes...

The Visual Web User Interface Design in Augmented Reality Technology

OpenAIRE

Chouyin Hsu; Haui-Chih Shiau

2013-01-01

Upon the popularity of 3C devices, the visual creatures are all around us, such the online game, touch pad, video and animation. Therefore, the text-based web page will no longer satisfy users. With the popularity of webcam, digital camera, stereoscopic glasses, or head-mounted display, the user interface becomes more visual and multi-dimensional. For the consideration of 3D and visual display in the research of web user interface design, Augmented Reality technology providing the convenient ...

VMTL: a language for end-user model transformation

DEFF Research Database (Denmark)

Acretoaie, Vlad; Störrle, Harald; Strüber, Daniel

2016-01-01

, these languages are largely ill-equipped for adoption by end-user modelers in areas such as requirements engineering, business process management, or enterprise architecture. We aim to introduce a model transformation language addressing the skills and requirements of end-user modelers. With this contribution, we......Model transformation is a key enabling technology of Model-Driven Engineering (MDE). Existing model transformation languages are shaped by and for MDE practitioners—a user group with needs and capabilities which are not necessarily characteristic of modelers in general. Consequently...... hope to broaden the application scope of model transformation and MDE technology in general. We discuss the profile of end-user modelers and propose a set of design guidelines for model transformation languages addressing them. We then introduce Visual Model Transformation Language (VMTL) following...

Health-enabling technologies for pervasive health care: on services and ICT architecture paradigms.

Science.gov (United States)

Haux, Reinhold; Howe, Jurgen; Marschollek, Michael; Plischke, Maik; Wolf, Klaus-Hendrik

2008-06-01

Progress in information and communication technologies (ICT) is providing new opportunities for pervasive health care services in aging societies. To identify starting points of health-enabling technologies for pervasive health care. To describe typical services of and contemporary ICT architecture paradigms for pervasive health care. Summarizing outcomes of literature analyses and results from own research projects in this field. Basic functions for pervasive health care with respect to home care comprise emergency detection and alarm, disease management, as well as health status feedback and advice. These functions are complemented by optional (non-health care) functions. Four major paradigms for contemporary ICT architectures are person-centered ICT architectures, home-centered ICT architectures, telehealth service-centered ICT architectures and health care institution-centered ICT architectures. Health-enabling technologies may lead to both new ways of living and new ways of health care. Both ways are interwoven. This has to be considered for appropriate ICT architectures of sensor-enhanced health information systems. IMIA, the International Medical Informatics Association, may be an appropriate forum for interdisciplinary research exchange on health-enabling technologies for pervasive health care.

NFC-Based User Interface for Smart Environments

Directory of Open Access Journals (Sweden)

Susanna Spinsante

2015-01-01

Full Text Available The physical support of a home automation system, joined with a simplified user-system interaction modality, may allow people affected by motor impairments or limitations, such as elderly and disabled people, to live safely and comfortably at home, by improving their autonomy and facilitating the execution of daily life tasks. The proposed solution takes advantage of the Near Field Communications technology, which is simple and intuitive to use, to enable advanced user interaction. The user can perform normal daily activities, such as lifting a gate or closing a window, through a device enabled to read NFC tags containing the commands for the home automation system. A passive Smart Panel is implemented, composed of multiple Near Field Communications tags properly programmed, to enable the execution of both individual commands and so-called scenarios. The work compares several versions of the proposed Smart Panel, differing for interrogation and composition of the single command, number of tags, and dynamic user interaction model, at a parity of the number of commands to issue. Main conclusions are drawn from the experimental results, about the effective adoption of Near Field Communications in smart assistive environments.

A Cloud-User Protocol Based on Ciphertext Watermarking Technology

Directory of Open Access Journals (Sweden)

Keyang Liu

2017-01-01

Full Text Available With the growth of cloud computing technology, more and more Cloud Service Providers (CSPs begin to provide cloud computing service to users and ask for users’ permission of using their data to improve the quality of service (QoS. Since these data are stored in the form of plain text, they bring about users’ worry for the risk of privacy leakage. However, the existing watermark embedding and encryption technology is not suitable for protecting the Right to Be Forgotten. Hence, we propose a new Cloud-User protocol as a solution for plain text outsourcing problem. We only allow users and CSPs to embed the ciphertext watermark, which is generated and embedded by Trusted Third Party (TTP, into the ciphertext data for transferring. Then, the receiver decrypts it and obtains the watermarked data in plain text. In the arbitration stage, feature extraction and the identity of user will be used to identify the data. The fixed Hamming distance code can help raise the system’s capability for watermarks as much as possible. Extracted watermark can locate the unauthorized distributor and protect the right of honest CSP. The results of experiments demonstrate the security and validity of our protocol.

Heat Treatment Used to Strengthen Enabling Coating Technology for Oil-Free Turbomachinery

Science.gov (United States)

Edmonds, Brian J.; DellaCorte, Christopher

2002-01-01

The PS304 high-temperature solid lubricant coating is a key enabling technology for Oil- Free turbomachinery propulsion and power systems. Breakthroughs in the performance of advanced foil air bearings and improvements in computer-based finite element modeling techniques are the key technologies enabling the development of Oil-Free aircraft engines being pursued by the Oil-Free Turbomachinery team at the NASA Glenn Research Center. PS304 is a plasma spray coating applied to the surface of shafts operating against foil air bearings or in any other component requiring solid lubrication at high temperatures, where conventional materials such as graphite cannot function.

Enabling Wireless Cooperation in User Provided Networks

OpenAIRE

Rolla, Vitor Guerra

2015-01-01

Tese de doutoramento em Ciências e Tecnologias da Informação, apresentada ao Departamento de Engenharia Informática da Faculdade de Ciências e Tecnologia da Universidade de Coimbra This doctoral thesis investigates user provided networks. Such networks have become important research subjects in the field of informatics engineering due to the recent popularity of smart phones. User provided networks are independent from traditional Internet service providers. Communication and informati...

Enabling instrumentation and technology for 21st century light sources

Energy Technology Data Exchange (ETDEWEB)

Byrd, J.M.; Shea, T.J.; Denes, P.; Siddons, P.; Attwood, D.; Kaertner, F.; Moog, L.; Li, Y.; Sakdinawat, A.; Schlueter, R.

2010-06-01

We present the summary from the Accelerator Instrumentation and Technology working group, one of the five working groups that participated in the BES-sponsored Workshop on Accelerator Physics of Future Light Sources held in Gaithersburg, MD September 15-17, 2009. We describe progress and potential in three areas: attosecond instrumentation, photon detectors for user experiments, and insertion devices.

HTS machines as enabling technology for all-electric airborne vehicles

International Nuclear Information System (INIS)

Masson, P J; Brown, G V; Soban, D S; Luongo, C A

2007-01-01

Environmental protection has now become paramount as evidence mounts to support the thesis of human activity-driven global warming. A global reduction of the emissions of pollutants into the atmosphere is therefore needed and new technologies have to be considered. A large part of the emissions come from transportation vehicles, including cars, trucks and airplanes, due to the nature of their combustion-based propulsion systems. Our team has been working for several years on the development of high power density superconducting motors for aircraft propulsion and fuel cell based power systems for aircraft. This paper investigates the feasibility of all-electric aircraft based on currently available technology. Electric propulsion would require the development of high power density electric propulsion motors, generators, power management and distribution systems. The requirements in terms of weight and volume of these components cannot be achieved with conventional technologies; however, the use of superconductors associated with hydrogen-based power plants makes possible the design of a reasonably light power system and would therefore enable the development of all-electric aero-vehicles. A system sizing has been performed both for actuators and for primary propulsion. Many advantages would come from electrical propulsion such as better controllability of the propulsion, higher efficiency, higher availability and less maintenance needs. Superconducting machines may very well be the enabling technology for all-electric aircraft development

HTS machines as enabling technology for all-electric airborne vehicles

Energy Technology Data Exchange (ETDEWEB)

Masson, P J [FAMU-FSU College of Engineering and the Center for Advanced Power Systems, Tallahassee, FL 32310 (United States); Brown, G V [NASA Glenn Research Center, Cleveland, OH (United States); Soban, D S [Aerospace System Design Laboratory/Georgia Tech, Atlanta, GA 32332 (United States); Luongo, C A [FAMU-FSU College of Engineering and the Center for Advanced Power Systems, Tallahassee, FL 32310 (United States)

2007-08-15

Environmental protection has now become paramount as evidence mounts to support the thesis of human activity-driven global warming. A global reduction of the emissions of pollutants into the atmosphere is therefore needed and new technologies have to be considered. A large part of the emissions come from transportation vehicles, including cars, trucks and airplanes, due to the nature of their combustion-based propulsion systems. Our team has been working for several years on the development of high power density superconducting motors for aircraft propulsion and fuel cell based power systems for aircraft. This paper investigates the feasibility of all-electric aircraft based on currently available technology. Electric propulsion would require the development of high power density electric propulsion motors, generators, power management and distribution systems. The requirements in terms of weight and volume of these components cannot be achieved with conventional technologies; however, the use of superconductors associated with hydrogen-based power plants makes possible the design of a reasonably light power system and would therefore enable the development of all-electric aero-vehicles. A system sizing has been performed both for actuators and for primary propulsion. Many advantages would come from electrical propulsion such as better controllability of the propulsion, higher efficiency, higher availability and less maintenance needs. Superconducting machines may very well be the enabling technology for all-electric aircraft development.

Technology for the Next-Generation-Mobile User Experience

Science.gov (United States)

Delagi, Greg

The current mobile-handset market is a vital and growing one, being driven by technology advances, including increased bandwidth and processing performance, as well as reduced power consumption and improved screen technologies. The 3G/4G handsets of today are multimedia internet devices with increased screen size, HD video and gaming, interactive touch screens, HD camera and camcorders, as well as incredible social, entertainment, and productivity applications. While mobile-technology advancements to date have made us more social in many ways, new advancements over the next decade will bring us to the next level, allowing mobile users to experience new types of "virtual" social interactions with all the senses. The mobile handsets of the future will be smart autonomous-lifestyle devices with a multitude of incorporated sensors, applications and display options, all designed to make your life easier and more productive! With future display media, including 3D imaging, virtual interaction and conferencing will be possible, making every call feel like you are in the same room, providing an experience far beyond today's video conferencing technology. 3D touch-screen with integrated image-projection technologies will work in conjunction with gesturing to bring a new era of intuitive mobile device applications, interaction, and information sharing. Looking to the future, there are many challenges to be faced in delivering a smart mobile companion device that will meet the user demands. One demand will be for the availability of new and compelling services, and features on the "mobile companion". These mobile companions will be more than just Internet devices, and will function as on-the-go workstations, allowing users to function as if they were sitting in front of their computer in the office or at home. The massive amounts of data that will be transmitted through, to and from these mobile companions will require immense improvements in system performance, including

Digital Watermarks Enabling E-Commerce Strategies: Conditional and User Specific Access to Services and Resources

Science.gov (United States)

Dittmann, Jana; Steinebach, Martin; Wohlmacher, Petra; Ackermann, Ralf

2002-12-01

Digital watermarking is well known as enabling technology to prove ownership on copyrighted material, detect originators of illegally made copies, monitor the usage of the copyrighted multimedia data and analyze the spread spectrum of the data over networks and servers. Research has shown that data hiding techniques can be applied successfully to other application areas like manipulations recognition. In this paper, we show our innovative approach for integrating watermark and cryptography based methods within a framework of new application scenarios spanning a wide range from dedicated and user specific services, "Try&Buy" mechanisms to general means for long-term customer relationships. The tremendous recent efforts to develop and deploy ubiquitous mobile communication possibilities are changing the demands but also possibilities for establishing new business and commerce relationships. Especially we motivate annotation watermarks and aspects of M-Commerce to show important scenarios for access control. Based on a description of the challenges of the application domain and our latest work we discuss, which methods can be used for establishing services in a fast convenient and secure way for conditional access services based on digital watermarking combined with cryptographic techniques. We introduce an example scenario for digital audio and an overview of steps in order to establish these concepts practically.

Enabling Technologies for Characterizing Exoplanet Systems with Exo-C

Science.gov (United States)

Cahoy, Kerri Lynn; Belikov, Ruslan; Stapelfeldt, Karl R.; Chakrabarti, Supriya; Trauger, John T.; Serabyn, Eugene; McElwain, Michael W.; Pong, Christopher M.; Brugarolas, Paul

2015-01-01

The Exoplanet Science and Technology Definition Team's Internal Coronagraph mission design, called 'Exo-C', utilizes several technologies that have advanced over the past decade with support from the Exoplanet Exploration Program. Following the flow of photons through the telescope, the science measurement is enabled by (i) a precision pointing system to keep the target exoplanet system precisely positioned on the detector during the integration time, (ii) high-performance coronagraphs to block the parent star's light so that the planet's reflected light can be detected, (iii) a wavefront control system to compensate for any wavefront errors such as those due to thermal or mechanical deformations in the optical path, especially errors with high spatial frequencies that could cause contrast-reducing speckles, and (iv) an integral field spectrograph (IFS) that provides moderate resolution spectra of the target exoplanets, permitting their characterization and comparison with models and other data sets. Technologies such as the wavefront control system and coronagraphs will also benefit from other funded efforts in progress, such as the Wide Field Infrared Survey Telescope Astrophysics Focused Telescope Assets (WFIRST-AFTA) program. Similarly, the Exo-C IFS will benefit from the Prototype Imaging Spectrograph for Coronagraphic Exoplanet Studies (PISCES) demonstration. We present specific examples for each of these technologies showing that the state of the art has advanced to levels that will meet the overall scientific, cost, and schedule requirements of the Exo-C mission. These capabilities have matured with testbed and/or ground-telescope demonstrations and have reached a technological readiness level (TRL) that supports their inclusion in the baseline design for potential flight at the end of this decade. While additional work remains to build and test flight-like components (that concurrently meet science as well as size, weight, power, and environmental

Teknologvurdering, Broer og Brugere (Technology Assessment: Bridges and Users)

DEFF Research Database (Denmark)

Munch, Birgitte

A critique of the scientific approaches grounding Danish technology assessments for beingnon-reflexive upon the consequences of its biased treatment of who and how some countsas ‘users'. Implications and new approaches are outlined in a story of engineering designers conceptualization of ships pa...... passing the Great Belt - the ‘sailing users' - during the constructionof the suspension bridge across the east channel. A story about 'How the Great BeltEast bridge main span got the length of 1624m....

Embedded Web Technology: Internet Technology Applied to Real-Time System Control

Science.gov (United States)

Daniele, Carl J.

1998-01-01

The NASA Lewis Research Center is developing software tools to bridge the gap between the traditionally non-real-time Internet technology and the real-time, embedded-controls environment for space applications. Internet technology has been expanding at a phenomenal rate. The simple World Wide Web browsers (such as earlier versions of Netscape, Mosaic, and Internet Explorer) that resided on personal computers just a few years ago only enabled users to log into and view a remote computer site. With current browsers, users not only view but also interact with remote sites. In addition, the technology now supports numerous computer platforms (PC's, MAC's, and Unix platforms), thereby providing platform independence.In contrast, the development of software to interact with a microprocessor (embedded controller) that is used to monitor and control a space experiment has generally been a unique development effort. For each experiment, a specific graphical user interface (GUI) has been developed. This procedure works well for a single-user environment. However, the interface for the International Space Station (ISS) Fluids and Combustion Facility will have to enable scientists throughout the world and astronauts onboard the ISS, using different computer platforms, to interact with their experiments in the Fluids and Combustion Facility. Developing a specific GUI for all these users would be cost prohibitive. An innovative solution to this requirement, developed at Lewis, is to use Internet technology, where the general problem of platform independence has already been partially solved, and to leverage this expanding technology as new products are developed. This approach led to the development of the Embedded Web Technology (EWT) program at Lewis, which has the potential to significantly reduce software development costs for both flight and ground software.

User-centered Technologies For Blind Children

Directory of Open Access Journals (Sweden)

Jaime Sánchez

2008-01-01

Full Text Available The purpose of this paper is to review, summarize, and illustrate research work involving four audio-based games created within a user-centered design methodology through successive usability tasks and evaluations. These games were designed by considering the mental model of blind children and their styles of interaction to perceive and process data and information. The goal of these games was to enhance the cognitive development of spatial structures, memory, haptic perception, mathematical skills, navigation and orientation, and problem solving of blind children. Findings indicate significant improvements in learning and cognition from using audio-based tools specially tailored for the blind. That is, technologies for blind children, carefully tailored through user-centered design approaches, can make a significant contribution to cognitive development of these children. This paper contributes new insight into the design and implementation of audio-based virtual environments to facilitate learning and cognition in blind children.

The Value of RFID Technology Enabled Information to Manage Perishables

NARCIS (Netherlands)

M.E. Ketzenberg (Michael); J.M. Bloemhof-Ruwaard (Jacqueline)

2009-01-01

textabstractWe address the value of RFID technology enabled information to manage perishables in the context of a supplier that sells a random lifetime product subject to stochastic demand and lost sales. The product's lifetime is largely determined by the time and temperature history in the supply

Power mobility with collision avoidance for older adults: user, caregiver, and prescriber perspectives.

Science.gov (United States)

Wang, Rosalie H; Korotchenko, Alexandra; Hurd Clarke, Laura; Mortenson, W Ben; Mihailidis, Alex

2013-01-01

Collision avoidance technology has the capacity to facilitate safer mobility among older power mobility users with physical, sensory, and cognitive impairments, thus enabling independence for more users. Little is known about consumers' perceptions of collision avoidance. This article draws on interviews (29 users, 5 caregivers, and 10 prescribers) to examine views on design and utilization of this technology. Data analysis identified three themes: "useful situations or contexts," "technology design issues and real-life application," and "appropriateness of collision avoidance technology for a variety of users." Findings support ongoing development of collision avoidance for older adult users. The majority of participants supported the technology and felt that it might benefit current users and users with visual impairments, but might be unsuitable for people with significant cognitive impairments. Some participants voiced concerns regarding the risk for injury with power mobility use and some identified situations where collision avoidance might be beneficial (driving backward, avoiding dynamic obstacles, negotiating outdoor barriers, and learning power mobility use). Design issues include the need for context awareness, reliability, and user interface specifications. User desire to maintain driving autonomy supports development of collaboratively controlled systems. This research lays the groundwork for future development by illustrating consumer requirements for this technology.

76 FR 58020 - Prescription Drug User Fee Act IV Information Technology Plan

Science.gov (United States)

2011-09-19

...] Prescription Drug User Fee Act IV Information Technology Plan AGENCY: Food and Drug Administration, HHS. ACTION... information technology (IT) plan entitled ``PDUFA IV Information Technology Plan'' (updated plan) to achieve... Information Technology Plan.'' This plan will meet one of the performance goals agreed to under the 2007...

Enabling Laser and Lidar Technologies for NASA's Science and Exploration Mission's Applications

Science.gov (United States)

Singh, Upendra N.; Kavaya, Michael J.

2005-01-01

NASA s Laser Risk Reduction Program, begun in 2002, has achieved many technology advances in only 3.5 years. The recent selection of several lidar proposals for Science and Exploration applications indicates that the LRRP goal of enabling future space-based missions by lowering the technology risk has already begun to be met.

A Web-based Multi-user Interactive Visualization System For Large-Scale Computing Using Google Web Toolkit Technology

Science.gov (United States)

Weiss, R. M.; McLane, J. C.; Yuen, D. A.; Wang, S.

2009-12-01

We have created a web-based, interactive system for multi-user collaborative visualization of large data sets (on the order of terabytes) that allows users in geographically disparate locations to simultaneous and collectively visualize large data sets over the Internet. By leveraging asynchronous java and XML (AJAX) web development paradigms via the Google Web Toolkit (http://code.google.com/webtoolkit/), we are able to provide remote, web-based users a web portal to LCSE's (http://www.lcse.umn.edu) large-scale interactive visualization system already in place at the University of Minnesota that provides high resolution visualizations to the order of 15 million pixels by Megan Damon. In the current version of our software, we have implemented a new, highly extensible back-end framework built around HTTP "server push" technology to provide a rich collaborative environment and a smooth end-user experience. Furthermore, the web application is accessible via a variety of devices including netbooks, iPhones, and other web- and javascript-enabled cell phones. New features in the current version include: the ability for (1) users to launch multiple visualizations, (2) a user to invite one or more other users to view their visualization in real-time (multiple observers), (3) users to delegate control aspects of the visualization to others (multiple controllers) , and (4) engage in collaborative chat and instant messaging with other users within the user interface of the web application. We will explain choices made regarding implementation, overall system architecture and method of operation, and the benefits of an extensible, modular design. We will also discuss future goals, features, and our plans for increasing scalability of the system which includes a discussion of the benefits potentially afforded us by a migration of server-side components to the Google Application Engine (http://code.google.com/appengine/).

Information and communication technology and user knowledge-driven innovation in services

Directory of Open Access Journals (Sweden)

Hong Y. Park

2015-12-01

Full Text Available User knowledge has been an important source of novel product development and innovation, but gathering accurate user knowledge has been time consuming and difficult because user knowledge is tacit and globally dispersed. However, information and communication technology can expand the boundaries by making user knowledge easier and less expensive to access. Structures and organizations are emerging to perform the task of user information gathering. This paper examines the nature of user knowledge and the emergence of a new system/structure for user knowledge gathering and user involvement in innovation. Three case studies of business innovation in three different organizations illustrate the ways that the organization matches the type of innovation with the characteristics of user knowledge. User involvement can occur either through direct input or via feedback provided after customers received services. User input can also be either proactive or reactive. User knowledge is often employed to monitor service workers also, which has significantly contributed to recent improvement in service quality. The cases presented support our proposition.

Enabling Accessibility Through Model-Based User Interface Development.

Science.gov (United States)

Ziegler, Daniel; Peissner, Matthias

2017-01-01

Adaptive user interfaces (AUIs) can increase the accessibility of interactive systems. They provide personalized display and interaction modes to fit individual user needs. Most AUI approaches rely on model-based development, which is considered relatively demanding. This paper explores strategies to make model-based development more attractive for mainstream developers.

User Facilities: The Education of New Neutron Users

International Nuclear Information System (INIS)

Hernandez, Yamali; Brown, Craig M.

2009-01-01

Neutron scattering is a particularly useful tool enabling the study of compositional, structural and dynamical properties of materials down to the atomic scale. Due to the complexity of operating an intense source of neutrons, this technique is primarily practiced at large national facilities that cater to the research needs of chemists, biologists, physicists, engineers, and material scientists in general. In particular, these user facilities provide specialized instrumentation along with the scientific and technical support required to efficiently utilize it. Since neutron scattering experiments are performed at central facilities rather than in the home-laboratories of individual investigators, the facilities themselves must play a key role in the education and development of new users. The role of neutron scattering facilities in educating young scientists will be examined using examples from current programs at the National Institute of Standards and Technology Center for Neutron Research.

Sparks in the Fog: Social and Economic Mechanisms as Enablers for Community Network Clouds

Directory of Open Access Journals (Sweden)

Muhammad Amin KHAN

2014-10-01

Full Text Available Internet and communication technologies have lowered the costs of enabling individuals and communities to collaborate together. This collaboration has provided new services like user-generated content and social computing, as evident from success stories like Wikipedia. Through collaboration, collectively built infrastructures like community wireless mesh networks where users provide the communication network, have also emerged. Community networks have demonstrated successful bandwidth sharing, but have not been able to extend their collective effort to other computing resources like storage and processing. The success of cloud computing has been enabled by economies of scale and the need for elastic, flexible and on-demand provisioning of computing services. The consolidation of today’s cloud technologies offers now the possibility of collectively built community clouds, building upon user-generated content and user-provided networks towards an ecosystem of cloud services. We explore in this paper how social and economic mechanisms can play a role in overcoming the barriers of voluntary resource provisioning in such community clouds, by analysing the costs involved in building these services and how they give value to the participants. We indicate socio-economic policies and how they can be implemented in community networks, to ease the uptake and ensure the sustainability of community clouds.

User involvement in service delivery predicts outcomes of assistive technology use: A cross-sectional study in Bangladesh

Directory of Open Access Journals (Sweden)

Borg Johan

2012-09-01

Full Text Available Abstract Background Knowledge about the relation between user involvement in the provision of assistive technology and outcomes of assistive technology use is a prerequisite for the development of efficient service delivery strategies. However, current knowledge is limited, particularly from low-income countries where affordability is an issue. The objective was therefore to explore the relation between outcomes of assistive technology use and user involvement in the service delivery process in Bangladesh. Methods Using structured interviews, data from 136 users of hearing aids and 149 users of manual wheelchairs were collected. Outcomes were measured using the International Outcome Inventory for Hearing Aids (IOI-HA, which was adapted for wheelchair users. Predictors of user involvement included preference, measurement and training. Results Users reported outcomes comparable to those found in other high- and low-income countries. User involvement increased the likelihood for reporting better outcomes except for measurement among hearing aid users. Conclusions The findings support the provision of assistive technology as a strategy to improve the participation of people with disabilities in society. They also support current policies and guidelines for user-involvement in the service delivery process. Simplified strategies for provision of hearing aids may be explored.

Advancing MEMS Technology Usage through the MUMPS (Multi-User MEMS Processes) Program

Science.gov (United States)

Koester, D. A.; Markus, K. W.; Dhuler, V.; Mahadevan, R.; Cowen, A.

1995-01-01

In order to help provide access to advanced micro-electro-mechanical systems (MEMS) technologies and lower the barriers for both industry and academia, the Microelectronic Center of North Carolina (MCNC) and ARPA have developed a program which provides users with access to both MEMS processes and advanced electronic integration techniques. The four distinct aspects of this program, the multi-user MEMS processes (MUMP's), the consolidated micro-mechanical element library, smart MEMS, and the MEMS technology network are described in this paper. MUMP's is an ARPA-supported program created to provide inexpensive access to MEMS technology in a multi-user environment. It is both a proof-of-concept and educational tool that aids in the development of MEMS in the domestic community. MUMP's technologies currently include a 3-layer poly-silicon surface micromachining process and LIGA (lithography, electroforming, and injection molding) processes that provide reasonable design flexibility within set guidelines. The consolidated micromechanical element library (CaMEL) is a library of active and passive MEMS structures that can be downloaded by the MEMS community via the internet. Smart MEMS is the development of advanced electronics integration techniques for MEMS through the application of flip chip technology. The MEMS technology network (TechNet) is a menu of standard substrates and MEMS fabrication processes that can be purchased and combined to create unique process flows. TechNet provides the MEMS community greater flexibility and enhanced technology accessibility.

End User and Implementer Experiences of mHealth Technologies for Noncommunicable Chronic Disease Management in Young Adults: Systematic Review.

Science.gov (United States)

Slater, Helen; Campbell, Jared M; Stinson, Jennifer N; Burley, Megan M; Briggs, Andrew M

2017-12-12

, chronic self-harm, and attention deficit hyperactivity disorder. Quality ratings were higher for implementer compared with end user studies. Both complementary and unique user themes emerged. Themes derived for end users of mHealth included (1) Experiences of functionality that supported self-management, (2) Acceptance (technical usability and feasibility), (3) Importance of codesign, and (4) Perceptions of benefit (self-efficacy and empowerment). For implementers, derived themes included (1) Characteristics that supported self-management (functional, technical, and behavior change); (2) Implementation challenges (systems level, service delivery level, and clinical level); (3) Adoption considerations for specific populations (training end users; specific design requirements); and (4) Codesign and tailoring to facilitate uptake and person-centered care. Synthesizing available data revealed both complementary and unique user perspectives on enablers and barriers to designing, developing, and implementing mHealth technologies to support young people's management of their chronic NCDs. PROSPERO CRD42017056317; http://www.crd.york.ac.uk/PROSPERO/display_record.asp?ID=CRD 42017056317 (Archived by WebCite at http://www.webcitation.org/6vZ5UkKLp). ©Helen Slater, Jared M Campbell, Jennifer N Stinson, Megan M Burley, Andrew M Briggs. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 12.12.2017.

Advanced Exploration Technologies: Micro and Nano Technologies Enabling Space Missions in the 21st Century

Science.gov (United States)

Krabach, Timothy

1998-01-01

Some of the many new and advanced exploration technologies which will enable space missions in the 21st century and specifically the Manned Mars Mission are explored in this presentation. Some of these are the system on a chip, the Computed-Tomography imaging Spectrometer, the digital camera on a chip, and other Micro Electro Mechanical Systems (MEMS) technology for space. Some of these MEMS are the silicon micromachined microgyroscope, a subliming solid micro-thruster, a micro-ion thruster, a silicon seismometer, a dewpoint microhygrometer, a micro laser doppler anemometer, and tunable diode laser (TDL) sensors. The advanced technology insertion is critical for NASA to decrease mass, volume, power and mission costs, and increase functionality, science potential and robustness.

Usability and use reference in the social network facebook: a netnographic analysis of technological users

Directory of Open Access Journals (Sweden)

Naiara Silva Ferreira

2015-10-01

Full Text Available This article presents a study about the preference of use in virtual social networks, using Facebook as object of study, to identify the motivational factors for the usability of this technology platform. The social network Facebook has been chosen to present a technological scenario of high sociability and virtual interaction. The methodology used was the netnography, being made through the collection of discussions in North American sites of news and forums online, where there is a large critical user participation on the internet, about the gains and frustrations in this context. The content analysis was performed comparing the categories of users found in the literature about values that motivate consumer technology, describing the hedonic, social, utilitarian values and perceptions of risk in consumption when related to lack of privacy. The results show two main groups of users of this technology and 7 subgroups. Therefore, the contribution of the study is that the formation of these groups may reflect technological usability of user groups around the world. The study also brings to the discussion issues related to the behaviors of the users of virtual networks which can be useful for businesses and their relationships with consumers and also the development of new knowledge from such criticism and demands that digital consumers expose about the technologies.

Enabling Semantic Queries Against the Spatial Database

Directory of Open Access Journals (Sweden)

PENG, X.

2012-02-01

Full Text Available The spatial database based upon the object-relational database management system (ORDBMS has the merits of a clear data model, good operability and high query efficiency. That is why it has been widely used in spatial data organization and management. However, it cannot express the semantic relationships among geospatial objects, making the query results difficult to meet the user's requirement well. Therefore, this paper represents an attempt to combine the Semantic Web technology with the spatial database so as to make up for the traditional database's disadvantages. In this way, on the one hand, users can take advantages of ORDBMS to store and manage spatial data; on the other hand, if the spatial database is released in the form of Semantic Web, the users could describe a query more concisely with the cognitive pattern which is similar to that of daily life. As a consequence, this methodology enables the benefits of both Semantic Web and the object-relational database (ORDB available. The paper discusses systematically the semantic enriched spatial database's architecture, key technologies and implementation. Subsequently, we demonstrate the function of spatial semantic queries via a practical prototype system. The query results indicate that the method used in this study is feasible.

Organic electronics: materials, technology and circuit design developments enabling new applications

NARCIS (Netherlands)

Leeuw, de D.M.; Cantatore, E.

2009-01-01

Organic electronics is growing to become an important new field in the global electronics market. RFID labels, flexible displays, solar cells, OLED-based lighting and displays are only some of the innovative products enabled by technologies based on organic semiconductors. Starting from a short

Technology Transfer Challenges: A Case Study of User-Centered Design in NASA's Systems Engineering Culture

Science.gov (United States)

Quick, Jason

2009-01-01

The Upper Stage (US) section of the National Aeronautics and Space Administration's (NASA) Ares I rocket will require internal access platforms for maintenance tasks performed by humans inside the vehicle. Tasks will occur during expensive critical path operations at Kennedy Space Center (KSC) including vehicle stacking and launch preparation activities. Platforms must be translated through a small human access hatch, installed in an enclosed worksite environment, support the weight of ground operators and be removed before flight - and their design must minimize additional vehicle mass at attachment points. This paper describes the application of a user-centered conceptual design process and the unique challenges encountered within NASA's systems engineering culture focused on requirements and "heritage hardware". The NASA design team at Marshall Space Flight Center (MSFC) initiated the user-centered design process by studying heritage internal access kits and proposing new design concepts during brainstorming sessions. Simultaneously, they partnered with the Technology Transfer/Innovative Partnerships Program to research inflatable structures and dynamic scaffolding solutions that could enable ground operator access. While this creative, technology-oriented exploration was encouraged by upper management, some design stakeholders consistently opposed ideas utilizing novel, untested equipment. Subsequent collaboration with an engineering consulting firm improved the technical credibility of several options, however, there was continued resistance from team members focused on meeting system requirements with pre-certified hardware. After a six-month idea-generating phase, an intensive six-week effort produced viable design concepts that justified additional vehicle mass while optimizing the human factors of platform installation and use. Although these selected final concepts closely resemble heritage internal access platforms, challenges from the application of the

Can Mobile Technology Enable Knowledge Communication in a Learning Environment?

DEFF Research Database (Denmark)

Kampf, Constance; Islas Sedano, Carolina

2008-01-01

this mobile phone game to help next years' students navigated the CampusNet system in order to study for the exam.  The CampusNet system can be seen as a knowledge management technology situated within the social context of the Project Management course, and so the examples offered, in effect, demonstrate...... To be effective, knowledge management systems need to encompass both social processes and technical components (McDermott 2000),   On the other hand, knowledge communication as a concept has emerged not from the inspiration of technology, but partly from the social-technical challenge of dealing...... with technology in knowledge management systems.  So, is knowledge communication a process that can be technologically enabled?  In this presentation, we explore the possibilities of socio-technical interaction for knowledge communication through the use of a mobile phone game as a knowledge communication tool...

Beam shaping as an enabler for new applications

Science.gov (United States)

Guertler, Yvonne; Kahmann, Max; Havrilla, David

2017-02-01

For many years, laser beam shaping has enabled users to achieve optimized process results as well as manage challenging applications. The latest advancements in industrial lasers and processing optics have taken this a step further as users are able to adapt the beam shape to meet specific application requirements in a very flexible way. TRUMPF has developed a wide range of experience in creating beam profiles at the work piece for optimized material processing. This technology is based on the physical model of wave optics and can be used with ultra short pulse lasers as well as multi-kW cw lasers. Basically, the beam shape can be adapted in all three dimensions in space, which allows maximum flexibility. Besides adaption of intensity profile, even multi-spot geometries can be produced. This approach is very cost efficient, because a standard laser source and (in the case of cw lasers) a standard fiber can be used without any special modifications. Based on this innovative beam shaping technology, TRUMPF has developed new and optimized processes. Two of the most recent application developments using these techniques are cutting glass and synthetic sapphire with ultra-short pulse lasers and enhanced brazing of hot dip zinc coated steel for automotive applications. Both developments lead to more efficient and flexible production processes, enabled by laser technology and open the door to new opportunities. They also indicate the potential of beam shaping techniques since they can be applied to both single-mode laser sources (TOP Cleave) and multi-mode laser sources (brazing).

Proposal for Implementing Multi-User Database (MUD) Technology in an Academic Library.

Science.gov (United States)

Filby, A. M. Iliana

1996-01-01

Explores the use of MOO (multi-user object oriented) virtual environments in academic libraries to enhance reference services. Highlights include the development of multi-user database (MUD) technology from gaming to non-recreational settings; programming issues; collaborative MOOs; MOOs as distinguished from other types of virtual reality; audio…

Future research in technological enablers for knowledge management: A worldwide expert study

DEFF Research Database (Denmark)

Sarka, Peter; Caldwell, Nicholas H. M.; Ipsen, Christine

2014-01-01

Information Technology (IT) is widely considered as an important part of knowledge management (KM). However, failures of KM in organisational practice have been attributed to an overemphasis of IT in KM. An improved understanding of the role of IT within KM in organisations could help to improve...... key research themes articulated by the KM experts to enhance and develop KM in relation to technological enablers....

A review of the Technologies Enabling Agile Manufacturing program

Energy Technology Data Exchange (ETDEWEB)

Gray, W.H.; Neal, R.E.; Cobb, C.K.

1996-10-01

Addressing a technical plan developed in consideration with major US manufacturers, software and hardware providers, and government representatives, the Technologies Enabling Agile Manufacturing (TEAM) program is leveraging the expertise and resources of industry, universities, and federal agencies to develop, integrate, and deploy leap-ahead manufacturing technologies. One of the TEAM program`s goals is to transition products from design to production faster, more efficiently, and at less cost. TEAM`s technology development strategy also provides all participants with early experience in establishing and working within an electronic enterprise that includes access to high-speed networks and high-performance computing and storage systems. The TEAM program uses the cross-cutting tools it collects, develops, and integrates to demonstrate and deploy agile manufacturing capabilities for three high-priority processes identified by industry: material removal, sheet metal forming, electro-mechanical assembly. This paper reviews the current status of the TEAM program with emphasis upon TEAM`s information infrastructure.

Rural public transportation technologies : user needs and applications : final report

Science.gov (United States)

1998-07-01

The Rural Public Transportation Technologies: User Needs and Applications study was conducted as part of the U.S. Department of Transportations (DOT) overall Rural Intelligent Transportation System (ITS) Program. The study examined the opportuniti...

Rural Public Transportation Technologies: User Needs and Applications. Executive Summary

Science.gov (United States)

1998-07-01

The Rural Public Transportation Technologies: User Needs and Applications study was conducted as part of the U.S. Department of Transportation's (DOT) overall Rural Intelligent Transportation System (ITS) Program. The study examined the opportunities...

Electric Energy Management in the Smart Home: Perspectives on Enabling Technologies and Consumer Behavior

Energy Technology Data Exchange (ETDEWEB)

Zipperer, A. [Colorado State Univ., Fort Collins, CO (United States); Aloise-Young, P. A. [Colorado State Univ., Fort Collins, CO (United States); Suryanarayanan, S. [Colorado State Univ., Fort Collins, CO (United States); Zimmerle, D. [Colorado State Univ., Fort Collins, CO (United States); Roche, R. [Univ. of Technology, Belfort-Montebeliard (France); Earle, L. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Christensen, D. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bauleo, P. [Fort Collins Utilities, CO (United States)

2013-08-01

Smart homes hold the potential for increasing energy efficiency, decreasing costs of energy use, decreasing the carbon footprint by including renewable resources, and trans-forming the role of the occupant. At the crux of the smart home is an efficient electric energy management system that is enabled by emerging technologies in the electricity grid and consumer electronics. This article presents a discussion of the state-of-the-art in electricity management in smart homes, the various enabling technologies that will accelerate this concept, and topics around consumer behavior with respect to energy usage.

Electric Energy Management in the Smart Home: Perspectives on Enabling Technologies and Consumer Behavior

Energy Technology Data Exchange (ETDEWEB)

Zipperer, Adam; Aloise-Young, Patricia A.; Suryanarayanan, Siddharth; Roche, Robin; Earle, Lieko; Christensen, Dane; Bauleo, Pablo; Zimmerle, Daniel

2013-11-01

Smart homes hold the potential for increasing energy efficiency, decreasing costs of energy use, decreasing the carbon footprint by including renewable resources, and transforming the role of the occupant. At the crux of the smart home is an efficient electric energy management system that is enabled by emerging technologies in the electric grid and consumer electronics. This article presents a discussion of the state-of-the-art in electricity management in smart homes, the various enabling technologies that will accelerate this concept, and topics around consumer behavior with respect to energy usage.

The rise and fall of self-service in Amsterdam trams: User technology relations in a case of service innovation

NARCIS (Netherlands)

Nahuis, Roel

2009-01-01

The stabilisation of innovative technology depends on reconciling technological opportunities and user behaviour. This can be achieved by adjusting the technology to the users, by configuring the user, or by a combination thereof. This paper evaluates different strategies in a case of service

The Technology-Enabled Patient Advocate: A Valuable Emerging Healthcare Partner.

Science.gov (United States)

Kent, Susan M; Yellowlees, Peter

2015-12-01

The U.S. healthcare system is changing and is becoming more patient-centered and technology-supported, with greater emphasis on population health outcomes and team-based care. The roles of healthcare providers are changing, and new healthcare roles are developing such as that of the patient advocate. This article reviews the history of this type of role, the changes that have taken place over time, the technological innovations in service delivery that further enable the role, and how the role could increasingly be developed in the future. Logical future extensions of the current typical patient advocate are the appearance of a virtual or avatar-driven care navigator, using telemedicine and related information technologies, as healthcare provision moves increasingly in a hybrid direction, with care being given both in-person and online.

Users' Perception of Medical Simulation Training: A Framework for Adopting Simulator Technology

Science.gov (United States)

Green, Leili Hayati

2014-01-01

Users play a key role in many training strategies, yet some organizations often fail to understand the users' perception after a simulation training implementation, their attitude about acceptance or rejection of and integration of emerging simulation technology in medical training (Gaba, 2007, and Topol, 2012). Several factors are considered to…

Technology-enabled assessment of health professions education: consensus statement and recommendations from the Ottawa 2010 Conference

DEFF Research Database (Denmark)

Amin, Zubair; Boulet, John R; Cook, David A

2011-01-01

The uptake of information and communication technologies (ICTs) in health professions education can have far-reaching consequences on assessment. The medical education community still needs to develop a deeper understanding of how technology can underpin and extend assessment practices....... This article was developed by the 2010 Ottawa Conference Consensus Group on technology-enabled assessment to guide practitioners and researchers working in this area. This article highlights the changing nature of ICTs in assessment, the importance of aligning technology-enabled assessment with local context...... and needs, the need for better evidence to support use of technologies in health profession education assessment, and a number of challenges, particularly validity threats, that need to be addressed while incorporating technology in assessment. Our recommendations are intended for all practitioners across...

Rural Public Transportation Technologies: User Needs and Applications. Final Report

Science.gov (United States)

1998-08-01

The Rural Public Transportation Technologies: User Needs and Applications Study was conducted as part of the U.S. DOT's overall Rural Intelligent Transportation System (ITS) Program. The study examined the opportunities and challenges of planning and...

Scaled CMOS Technology Reliability Users Guide

Science.gov (United States)

White, Mark

2010-01-01

The desire to assess the reliability of emerging scaled microelectronics technologies through faster reliability trials and more accurate acceleration models is the precursor for further research and experimentation in this relevant field. The effect of semiconductor scaling on microelectronics product reliability is an important aspect to the high reliability application user. From the perspective of a customer or user, who in many cases must deal with very limited, if any, manufacturer's reliability data to assess the product for a highly-reliable application, product-level testing is critical in the characterization and reliability assessment of advanced nanometer semiconductor scaling effects on microelectronics reliability. A methodology on how to accomplish this and techniques for deriving the expected product-level reliability on commercial memory products are provided.Competing mechanism theory and the multiple failure mechanism model are applied to the experimental results of scaled SDRAM products. Accelerated stress testing at multiple conditions is applied at the product level of several scaled memory products to assess the performance degradation and product reliability. Acceleration models are derived for each case. For several scaled SDRAM products, retention time degradation is studied and two distinct soft error populations are observed with each technology generation: early breakdown, characterized by randomly distributed weak bits with Weibull slope (beta)=1, and a main population breakdown with an increasing failure rate. Retention time soft error rates are calculated and a multiple failure mechanism acceleration model with parameters is derived for each technology. Defect densities are calculated and reflect a decreasing trend in the percentage of random defective bits for each successive product generation. A normalized soft error failure rate of the memory data retention time in FIT/Gb and FIT/cm2 for several scaled SDRAM generations is

Implementing Virtual Private Networking for Enabling Lower Cost, More Secure Wide Area Communications at Sandia National Laboratories; TOPICAL

International Nuclear Information System (INIS)

MILLER, MARC M.; YONEK JR., GEORGE A.

2001-01-01

Virtual Private Networking is a new communications technology that promises lower cost, more secure wide area communications by leveraging public networks such as the Internet. Sandia National Laboratories has embraced the technology for interconnecting remote sites to Sandia's corporate network, and for enabling remote access users for both dial-up and broadband access

Extending green technology innovations to enable greener fabs

Science.gov (United States)

Takahisa, Kenji; Yoo, Young Sun; Fukuda, Hitomi; Minegishi, Yuji; Enami, Tatsuo

2015-03-01

Semiconductor manufacturing industry has growing concerns over future environmental impacts as fabs expand and new generations of equipment become more powerful. Especially rare gases supply and price are one of prime concerns for operation of high volume manufacturing (HVM) fabs. Over the past year it has come to our attention that Helium and Neon gas supplies could be unstable and become a threat to HVM fabs. To address these concerns, Gigaphoton has implemented various green technologies under its EcoPhoton program. One of the initiatives is GigaTwin deep ultraviolet (DUV) lithography laser design which enables highly efficient and stable operation. Under this design laser systems run with 50% less electric energy and gas consumption compared to conventional laser designs. In 2014 we have developed two technologies to further reduce electric energy and gas efficiency. The electric energy reduction technology is called eGRYCOS (enhanced Gigaphoton Recycled Chamber Operation System), and it reduces electric energy by 15% without compromising any of laser performances. eGRYCOS system has a sophisticated gas flow design so that we can reduce cross-flow-fan rotation speed. The gas reduction technology is called eTGM (enhanced Total gas Manager) and it improves gas management system optimizing the gas injection and exhaust amount based on laser performances, resulting in 50% gas savings. The next steps in our roadmap technologies are indicated and we call for potential partners to work with us based on OPEN INNOVATION concept to successfully develop faster and better solutions in all possible areas where green innovation may exist.

Flexible and Transparent User Authentication for Mobile Devices

Science.gov (United States)

Clarke, Nathan; Karatzouni, Sevasti; Furnell, Steven

The mobile device has become a ubiquitous technology that is capable of supporting an increasingly large array of services, applications and information. Given their increasing importance, it is imperative to ensure that such devices are not misused or abused. Unfortunately, a key enabling control to prevent this, user authentication, has not kept up with the advances in device technology. This paper presents the outcomes of a 2 year study that proposes the use of transparent and continuous biometric authentication of the user: providing more comprehensive identity verification; minimizing user inconvenience; and providing security throughout the period of use. A Non-Intrusive and Continuous Authentication (NICA) system is described that maintains a continuous measure of confidence in the identity of the user, removing access to sensitive services and information with low confidence levels and providing automatic access with higher confidence levels. An evaluation of the framework is undertaken from an end-user perspective via a trial involving 27 participants. Whilst the findings raise concerns over education, privacy and intrusiveness, overall 92% of users felt the system offered a more secure environment when compared to existing forms of authentication.

NOVEL PROPOSAL FOR AUTOMATION OF LAND REGISTRATIONS USING BLOCK CHAIN TECHNOLOGY

OpenAIRE

M.Archana1 and S. Suguna Mallika2

2018-01-01

Bitcoins are currently gaining popularity among the internet users with their novel approach of dominating the third-party validation like the involvement of banks or trusted third parties in financial transactions. The main technology enabling the rampant rise in the implementation of cryptocurrencies like Bitcoins is Block Chain Technology. Though the block chain technology is much older in its conceptualization and realization, bitcoins popularized it. Block chain technology is an enabling...

Enabling frameworks for low-carbon technology transfer to small emerging economies: Analysis of ten case studies in Chile

International Nuclear Information System (INIS)

Pueyo, Ana

2013-01-01

Technology transfer is crucial to reduce the carbon intensity of developing countries. Enabling frameworks need to be in place to allow foreign technologies to flow, to be absorbed and to bring about technological change in the recipient country. This paper contributes to identifying these enabling factors by analysing 10 case studies of low-carbon technology transfer processes based in Chile. Our findings show the importance of strong economic and institutional fundamentals, a sound knowledge base, a sizable and stable demand and a functioning local industry. Policy recommendations are derived to improve the penetration of foreign low-carbon technologies in developing countries, focusing on the particularities of small and medium emerging economies. - Highlights: ► We analyse 10 case studies of low carbon technology transfer to Chile. ► We identify enablers of technology transfer to developing countries. ► We provide policy recommendations focusing on small and medium economies.

Challenges of user-centred assistive technology provision in Australia: shopping without a prescription.

Science.gov (United States)

Steel, Emily J; Layton, Natasha Ann; Foster, Michele M; Bennett, Sally

2016-01-01

People with disability have a right to assistive technology devices and services, to support their inclusion and participation in society. User-centred approaches aim to address consumer dissatisfaction and sub-optimal outcomes from assistive technology (AT) provision, but make assumptions of consumer literacy and empowerment. Policy discourses about consumer choice prompt careful reflection, and this paper aims to provide a critical perspective on user involvement in assistive technology provision. User-centred approaches are considered, using literature to critically reflect on what user involvement means in AT provision. Challenges at the level of interactions between practitioners and consumers, and also the level of markets and policies are discussed, using examples from Australia. There is no unanimous conceptual framework for user-centred practice. Power imbalances and differing perspectives between practitioners and consumers make it difficult for consumers to feel empowered. Online access to information and international suppliers has not surmounted information asymmetries for consumers or lifted the regulation of publicly funded AT devices. Ensuring access and equity in the public provision of AT is challenging in an expanding market with diverse stakeholders. Consumers require personalised information and support to facilitate their involvement and choice in AT provision. Implications for Rehabilitation Variations in approaches informing AT provision practices have a profound impact on equity of access and outcomes for consumers. An internationalised and online market for AT devices is increasing the need for effective information provision strategies and services. Power imbalances between practitioners and consumers present barriers to the realisation of user-centred practice.

Advanced excimer laser technologies enable green semiconductor manufacturing

Science.gov (United States)

Fukuda, Hitomi; Yoo, Youngsun; Minegishi, Yuji; Hisanaga, Naoto; Enami, Tatsuo

2014-03-01

"Green" has fast become an important and pervasive topic throughout many industries worldwide. Many companies, especially in the manufacturing industries, have taken steps to integrate green initiatives into their high-level corporate strategies. Governments have also been active in implementing various initiatives designed to increase corporate responsibility and accountability towards environmental issues. In the semiconductor manufacturing industry, there are growing concerns over future environmental impact as enormous fabs expand and new generation of equipments become larger and more powerful. To address these concerns, Gigaphoton has implemented various green initiatives for many years under the EcoPhoton™ program. The objective of this program is to drive innovations in technology and services that enable manufacturers to significantly reduce both the financial and environmental "green cost" of laser operations in high-volume manufacturing environment (HVM) - primarily focusing on electricity, gas and heat management costs. One example of such innovation is Gigaphoton's Injection-Lock system, which reduces electricity and gas utilization costs of the laser by up to 50%. Furthermore, to support the industry's transition from 300mm to the next generation 450mm wafers, technologies are being developed to create lasers that offer double the output power from 60W to 120W, but reducing electricity and gas consumption by another 50%. This means that the efficiency of lasers can be improve by up to 4 times in 450mm wafer production environments. Other future innovations include the introduction of totally Heliumfree Excimer lasers that utilize Nitrogen gas as its replacement for optical module purging. This paper discusses these and other innovations by Gigaphoton to enable green manufacturing.

Enhancing the Effectiveness of Consumer-Focused Health Information Technology Systems Through eHealth Literacy: A Framework for Understanding Users' Needs.

Science.gov (United States)

Kayser, Lars; Kushniruk, Andre; Osborne, Richard H; Norgaard, Ole; Turner, Paul

2015-05-20

concept (based on 7 domains) was incorporated as a key factor in expanding the user-task-context matrix to describe and qualify user requirements and understanding related to eHealth literacy. This resulted in an expanded framework and a five-step process, which can support health IT designers in understanding and more accurately addressing end-users' needs, capabilities, and contexts to improve effectiveness and broader applicability of consumer-focused health IT systems. It is anticipated that the framework will also be useful for policy makers involved in the planning, procuring, and funding of eHealth infrastructure, applications, and services. Developing effective eHealth products requires complete understanding of the end-users' needs from multiple perspectives. In this paper, we have proposed and detailed a framework for modeling users' needs for designing eHealth systems that merges prior work in development of a user-task-context matrix with the emerging area of eHealth literacy. This framework is intended to be used to guide design of eHealth technologies and to make requirements explicitly related to eHealth literacy, enabling a generation of well-targeted, fit-for-purpose, equitable, and effective products and systems.

INSIGHT: RFID and Bluetooth enabled automated space for the blind and visually impaired.

Science.gov (United States)

Ganz, Aura; Gandhi, Siddhesh Rajan; Wilson, Carole; Mullett, Gary

2010-01-01

In this paper we introduce INSIGHT, an indoor location tracking and navigation system to help the blind and visually impaired to easily navigate to their chosen destination in a public building. INSIGHT makes use of RFID and Bluetooth technology deployed within the building to locate and track the users. The PDA based user device interacts with INSIGHT server and provides the user navigation instructions in an audio form. The proposed system provides multi-resolution localization of the users, facilitating the provision of accurate navigation instructions when the user is in the vicinity of the RFID tags as well as accommodating a PANIC button which provides navigation instructions when the user is anywhere in the building. Moreover, the system will continuously monitor the zone in which the user walks. This will enable the system to identify if the user is located in the wrong zone of the building which may not lead to the desired destination.

Stratified Charge Rotary Engine Critical Technology Enablement, Volume 1

Science.gov (United States)

Irion, C. E.; Mount, R. E.

1992-01-01

This report summarizes results of a critical technology enablement effort with the stratified charge rotary engine (SCRE) focusing on a power section of 0.67 liters (40 cu. in.) per rotor in single and two rotor versions. The work is a continuation of prior NASA Contracts NAS3-23056 and NAS3-24628. Technical objectives are multi-fuel capability, including civil and military jet fuel and DF-2, fuel efficiency of 0.355 Lbs/BHP-Hr. at best cruise condition above 50 percent power, altitude capability of up to 10Km (33,000 ft.) cruise, 2000 hour TBO and reduced coolant heat rejection. Critical technologies for SCRE's that have the potential for competitive performance and cost in a representative light-aircraft environment were examined. Objectives were: the development and utilization of advanced analytical tools, i.e. higher speed and enhanced three dimensional combustion modeling; identification of critical technologies; development of improved instrumentation, and to isolate and quantitatively identify the contribution to performance and efficiency of critical components or subsystems.

Barriers and Facilitators to Community Mobility for Assistive Technology Users

Directory of Open Access Journals (Sweden)

Natasha Layton

2012-01-01

Full Text Available Mobility is frequently described in terms of individual body function and structures however contemporary views of disability also recognise the role of environment in creating disability. Aim. To identify consumer perspectives regarding barriers and facilitators to optimal mobility for a heterogeneous population of impaired Victorians who use assistive technology in their daily lives. Method. An accessible survey investigated the impact of supports or facilitators upon actual and desired life outcomes and health-related quality of life, from 100 AT users in Victoria, Australia. This paper reports upon data pertaining to community mobility. Results. A range of barriers and enablers to community mobility were identified including access to AT devices, environmental interventions, public transport, and inclusive community environs. Substantial levels of unmet need result in limited personal mobility and community participation. Outcomes fall short of many principles enshrined in current policy and human rights frameworks. Conclusion. AT devices as well as accessible and inclusive home and community environs are essential to maximizing mobility for many. Given the impact of the environment upon the capacity of individuals to realise community mobility, this raises the question as to whether rehabilitation practitioners, as well as prescribing AT devices, should work to build accessible communities via systemic advocacy.

Cognitive Heterogeneous Reconfigurable Optical Networks (CHRON): Enabling Technologies and Techniques

DEFF Research Database (Denmark)

Tafur Monroy, Idelfonso; Zibar, Darko; Guerrero Gonzalez, Neil

2011-01-01

We present the approach of cognition applied to heterogeneous optical networks developed in the framework of the EU project CHRON: Cognitive Heterogeneous Reconfigurable Optical Network. We introduce and discuss in particular the technologies and techniques that will enable a cognitive optical...... network to observe, act, learn and optimizes its performance, taking into account its high degree of heterogeneity with respect to quality of service, transmission and switching techniques....

User Interface Technology Transfer to NASA's Virtual Wind Tunnel System

Science.gov (United States)

vanDam, Andries

1998-01-01

Funded by NASA grants for four years, the Brown Computer Graphics Group has developed novel 3D user interfaces for desktop and immersive scientific visualization applications. This past grant period supported the design and development of a software library, the 3D Widget Library, which supports the construction and run-time management of 3D widgets. The 3D Widget Library is a mechanism for transferring user interface technology from the Brown Graphics Group to the Virtual Wind Tunnel system at NASA Ames as well as the public domain.

Enabling technologies built on a sonochemical platform: challenges and opportunities.

Science.gov (United States)

Cintas, Pedro; Tagliapietra, Silvia; Caporaso, Marina; Tabasso, Silvia; Cravotto, Giancarlo

2015-07-01

Scientific and technological progress now occurs at the interface between two or more scientific and technical disciplines while chemistry is intertwined with almost all scientific domains. Complementary and synergistic effects have been found in the overlay between sonochemistry and other enabling technologies such as mechanochemistry, microwave chemistry and flow-chemistry. Although their nature and effects are intrinsically different, these techniques share the ability to significantly activate most chemical processes and peculiar phenomena. These studies offer a comprehensive overview of sonochemistry, provide a better understanding of correlated phenomena (mechanochemical effects, hot spots, etc.), and pave the way for emerging applications which unite hybrid reactors. Copyright © 2014 Elsevier B.V. All rights reserved.

Efficient technologies or user behaviour, which is the more important when reducing households' energy consumption?

DEFF Research Database (Denmark)

Gram-Hanssen, Kirsten

2013-01-01

Much policy effort focuses on energy efficiency of technology, though not only efficiency but also user behaviour is an important factor influencing the amount of consumed energy. This paper explores to what extent energy efficiency of appliances and houses or user behaviour is the more important...... and Danish national statistics. These Danish data are discussed together with international studies. Through the presentation of these different projects and examples, it is shown how user behaviour is at least as important as the efficiency of technology when explaining households' energy consumption...

Spatial issues in user interface design from a graphic design perspective

Science.gov (United States)

Marcus, Aaron

1989-01-01

The user interface of a computer system is a visual display that provides information about the status of operations on data within the computer and control options to the user that enable adjustments to these operations. From the very beginning of computer technology the user interface was a spatial display, although its spatial features were not necessarily complex or explicitly recognized by the users. All text and nonverbal signs appeared in a virtual space generally thought of as a single flat plane of symbols. Current technology of high performance workstations permits any element of the display to appear as dynamic, multicolor, 3-D signs in a virtual 3-D space. The complexity of appearance and the user's interaction with the display provide significant challenges to the graphic designer of current and future user interfaces. In particular, spatial depiction provides many opportunities for effective communication of objects, structures, processes, navigation, selection, and manipulation. Issues are presented that are relevant to the graphic designer seeking to optimize the user interface's spatial attributes for effective visual communication.

Script of Healthcare Technology: Do Designs of Robotic Beds Exclude or Include Users?

DEFF Research Database (Denmark)

Brodersen, Søsser Grith Kragh; Hansen, Meiken; Lindegaard, Hanne

2015-01-01

Many new product designs are currently being implemented in the healthcare sector, and this presents designers with challenges involved in socially innovative design. In this paper, we argue that designing assistive technologies requires focus on multiple users and use practices. We see the design...... of assistive technologies as design of socio-material assemblies , which include an analysis of the products already used in relation to multiple users, their practices and wishes. In the article we focus on the challenges in the implementation of two types of robotic beds used for disability care...

Enabling Technology for Monitoring & Predicting Gas Turbine Health & Performance in COAL IGCC Powerplants

Energy Technology Data Exchange (ETDEWEB)

Kenneth A. Yackly

2004-09-30

The ''Enabling & Information Technology To Increase RAM for Advanced Powerplants'' program, by DOE request, has been re-directed, de-scoped to two tasks, shortened to a 2-year period of performance, and refocused to develop, validate and accelerate the commercial use of enabling materials technologies and sensors for Coal IGCC powerplants. The new program has been re-titled as ''Enabling Technology for Monitoring & Predicting Gas Turbine Health & Performance in IGCC Powerplants'' to better match the new scope. This technical progress report summarizes the work accomplished in the reporting period April 1, 2004 to August 31, 2004 on the revised Re-Directed and De-Scoped program activity. The program Tasks are: Task 1--IGCC Environmental Impact on high Temperature Materials: This first materials task has been refocused to address Coal IGCC environmental impacts on high temperature materials use in gas turbines and remains in the program. This task will screen material performance and quantify the effects of high temperature erosion and corrosion of hot gas path materials in Coal IGCC applications. The materials of interest will include those in current service as well as advanced, high-performance alloys and coatings. Task 2--Material In-Service Health Monitoring: This second task develops and demonstrates new sensor technologies to determine the in-service health of advanced technology Coal IGCC powerplants, and remains in the program with a reduced scope. Its focus is now on only two critical sensor need areas for advanced Coal IGCC gas turbines: (1) Fuel Quality Sensor for detection of fuel impurities that could lead to rapid component degradation, and a Fuel Heating Value Sensor to rapidly determine the fuel heating value for more precise control of the gas turbine, and (2) Infra-Red Pyrometer to continuously measure the temperature of gas turbine buckets, nozzles, and combustor hardware.

User Behavior Assessment of Household Electric Usage

Directory of Open Access Journals (Sweden)

Nur Budi Mulyono

2014-02-01

Full Text Available Abstract. Energy resilience is one of the famous issues among researchers and practitioners in energy sector. With enabling new technologies in power engineering for smart grid such as distributed generation, distributed storage, and intelligent information and management, each household community can establish a resilience energy production, distribution, and consumption. A household in smart grid system behaves as a customer and producer at the same time. This condition enabled them to reduce the power shortage in the peak hours, reduce CO2 pollution using renewable electricity, and minimizing electricity usage by changing life style. In developing countries, the amount of electricity supply is less than its demand. Most of the demand comes from the household that has peak load on nighttime. Keywords: User behavior, Game theory, Smart grid, Heating and cooling appliances, Energy resilientdoi:10.12695/ajtm.2013.6.2.1 How to cite this article:Mulyono, N. B. (2013. User Behavior Assessment of Household Electric Usage. The Asian Journal of Technology Management 6 (2: 65-71. Print ISSN: 1978-6956; Online ISSN: 2089-791X. doi:10.12695/ajtm.2013.6.2.1  

The GEOSS User Requirement Registry (URR): A Cross-Cutting Service-Oriented Infrastructure Linking Science, Society and GEOSS

Science.gov (United States)

Plag, H.-P.; Foley, G.; Jules-Plag, S.; Ondich, G.; Kaufman, J.

2012-04-01

The Group on Earth Observations (GEO) is implementing the Global Earth Observation System of Systems (GEOSS) as a user-driven service infrastructure responding to the needs of users in nine interdependent Societal Benefit Areas (SBAs) of Earth observations (EOs). GEOSS applies an interdisciplinary scientific approach integrating observations, research, and knowledge in these SBAs in order to enable scientific interpretation of the collected observations and the extraction of actionable information. Using EOs to actually produce these societal benefits means getting the data and information to users, i.e., decision-makers. Thus, GEO needs to know what the users need and how they would use the information. The GEOSS User Requirements Registry (URR) is developed as a service-oriented infrastructure enabling a wide range of users, including science and technology (S&T) users, to express their needs in terms of EOs and to understand the benefits of GEOSS for their fields. S&T communities need to be involved in both the development and the use of GEOSS, and the development of the URR accounts for the special needs of these communities. The GEOSS Common Infrastructure (GCI) at the core of GEOSS includes system-oriented registries enabling users to discover, access, and use EOs and derived products and services available through GEOSS. In addition, the user-oriented URR is a place for the collection, sharing, and analysis of user needs and EO requirements, and it provides means for an efficient dialog between users and providers. The URR is a community-based infrastructure for the publishing, viewing, and analyzing of user-need related information. The data model of the URR has a core of seven relations for User Types, Applications, Requirements, Research Needs, Infrastructure Needs, Technology Needs, and Capacity Building Needs. The URR also includes a Lexicon, a number of controlled vocabularies, and

A Systematic Review of Reviews Evaluating Technology-Enabled Diabetes Self-Management Education and Support.

Science.gov (United States)

Greenwood, Deborah A; Gee, Perry M; Fatkin, Kathy J; Peeples, Malinda

2017-09-01

Since the introduction of mobile phones, technology has been increasingly used to enable diabetes self-management education and support. This timely systematic review summarizes how currently available technology impacts outcomes for people living with diabetes. A systematic review of high quality review articles and meta analyses focused on utilizing technology in diabetes self-management education and support services was conducted. Articles were included if published between January 2013 and January 2017. Twenty-five studies were included for analysis. The majority evaluated the use of mobile phones and secure messaging. Most studies described healthy eating, being active and metabolic monitoring as the predominant self-care behaviors evaluated. Eighteen of 25 reviews reported significant reduction in A1c as an outcome measure. Four key elements emerged as essential for improved A1c: (1) communication, (2) patient-generated health data, (3) education, and (4) feedback. Technology-enabled diabetes self-management solutions significantly improve A1c. The most effective interventions incorporated all the components of a technology-enabled self-management feedback loop that connected people with diabetes and their health care team using 2-way communication, analyzed patient-generated health data, tailored education, and individualized feedback. The evidence from this systematic review indicates that organizations, policy makers and payers should consider integrating these solutions in the design of diabetes self-management education and support services for population health and value-based care models. With the widespread adoption of mobile phones, digital health solutions that incorporate evidence-based, behaviorally designed interventions can improve the reach and access to diabetes self-management education and ongoing support.

Enabling Technology for Monitoring & Predicting Gas Turbine Health & Performance in IGCC Powerplants

Energy Technology Data Exchange (ETDEWEB)

Kenneth A. Yackly

2005-12-01

The ''Enabling & Information Technology To Increase RAM for Advanced Powerplants'' program, by DOE request, was re-directed, de-scoped to two tasks, shortened to a 2-year period of performance, and refocused to develop, validate and accelerate the commercial use of enabling materials technologies and sensors for coal/IGCC powerplants. The new program was re-titled ''Enabling Technology for Monitoring & Predicting Gas Turbine Health & Performance in IGCC Powerplants''. This final report summarizes the work accomplished from March 1, 2003 to March 31, 2004 on the four original tasks, and the work accomplished from April 1, 2004 to July 30, 2005 on the two re-directed tasks. The program Tasks are summarized below: Task 1--IGCC Environmental Impact on high Temperature Materials: The first task was refocused to address IGCC environmental impacts on high temperature materials used in gas turbines. This task screened material performance and quantified the effects of high temperature erosion and corrosion of hot gas path materials in coal/IGCC applications. The materials of interest included those in current service as well as advanced, high-performance alloys and coatings. Task 2--Material In-Service Health Monitoring: The second task was reduced in scope to demonstrate new technologies to determine the inservice health of advanced technology coal/IGCC powerplants. The task focused on two critical sensing needs for advanced coal/IGCC gas turbines: (1) Fuel Quality Sensor to rapidly determine the fuel heating value for more precise control of the gas turbine, and detection of fuel impurities that could lead to rapid component degradation. (2) Infra-Red Pyrometer to continuously measure the temperature of gas turbine buckets, nozzles, and combustor hardware. Task 3--Advanced Methods for Combustion Monitoring and Control: The third task was originally to develop and validate advanced monitoring and control methods for coal/IGCC gas

Integrated IoT technology in industrial lasers for the improved user experience

Science.gov (United States)

Ding, Jianwu; Liu, Jinhui

2018-02-01

The end users' biggest concern for any industrial equipment is the reliability and the service down-time. This is especially true for industrial lasers as they are typically used in fully or semi- automated processes. Here we demonstrate how to use the integrated Internet of Things (IoT) technology in industrial lasers to address the reliability and the service down-time so to improve end users' experience.

New dynamic silicon photonic components enabled by MEMS technology

Science.gov (United States)

Errando-Herranz, Carlos; Edinger, Pierre; Colangelo, Marco; Björk, Joel; Ahmed, Samy; Stemme, Göran; Niklaus, Frank; Gylfason, Kristinn B.

2018-02-01

Silicon photonics is the study and application of integrated optical systems which use silicon as an optical medium, usually by confining light in optical waveguides etched into the surface of silicon-on-insulator (SOI) wafers. The term microelectromechanical systems (MEMS) refers to the technology of mechanics on the microscale actuated by electrostatic actuators. Due to the low power requirements of electrostatic actuation, MEMS components are very power efficient, making them well suited for dense integration and mobile operation. MEMS components are conventionally also implemented in silicon, and MEMS sensors such as accelerometers, gyros, and microphones are now standard in every smartphone. By combining these two successful technologies, new active photonic components with extremely low power consumption can be made. We discuss our recent experimental work on tunable filters, tunable fiber-to-chip couplers, and dynamic waveguide dispersion tuning, enabled by the marriage of silicon MEMS and silicon photonics.

FY2014 Fuel & Lubricant Technologies Annual Progress Report

Energy Technology Data Exchange (ETDEWEB)

Stork, Kevin [Office of Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States)

2016-02-01

Annual progress report for Fuel & Lubricant Technologies. The Fuel & Lubricant Technologies Program supports fuels and lubricants research and development (R&D) to provide vehicle manufacturers and users with cost-competitive options that enable high fuel economy with low emissions, and contribute to petroleum displacement.

Enabling Technologies for Smart Grid Integration and Interoperability of Electric Vehicles

DEFF Research Database (Denmark)

Martinenas, Sergejus

Conventional, centralized power plants are being replaced by intermittent, distributed renewable energy sources, thus raising the concern about the stability of the power grid in its current state. All the while, electrification of all forms of transportation is increasing the load...... for successful EV integration into the smart grid, as a smart, mobile distributed energy resource. The work is split into three key topics: enabling technologies, grid service applications and interoperability issues. The current state of e-mobility technologies is surveyed. Technologies and protocols...... EVs to not only mitigate their own effects on the grid, but also provide value to grid operators, locally as well as system wide. Finally, it is shown that active integration of EVs into the smart grid, is not only achievable, but is well on its way to becoming a reality....

Technological, biological, and acoustical constraints to music perception in cochlear implant users.

Science.gov (United States)

Limb, Charles J; Roy, Alexis T

2014-02-01

Despite advances in technology, the ability to perceive music remains limited for many cochlear implant users. This paper reviews the technological, biological, and acoustical constraints that make music an especially challenging stimulus for cochlear implant users, while highlighting recent research efforts to overcome these shortcomings. The limitations of cochlear implant devices, which have been optimized for speech comprehension, become evident when applied to music, particularly with regards to inadequate spectral, fine-temporal, and dynamic range representation. Beyond the impoverished information transmitted by the device itself, both peripheral and central auditory nervous system deficits are seen in the presence of sensorineural hearing loss, such as auditory nerve degeneration and abnormal auditory cortex activation. These technological and biological constraints to effective music perception are further compounded by the complexity of the acoustical features of music itself that require the perceptual integration of varying rhythmic, melodic, harmonic, and timbral elements of sound. Cochlear implant users not only have difficulty perceiving spectral components individually (leading to fundamental disruptions in perception of pitch, melody, and harmony) but also display deficits with higher perceptual integration tasks required for music perception, such as auditory stream segregation. Despite these current limitations, focused musical training programs, new assessment methods, and improvements in the representation and transmission of the complex acoustical features of music through technological innovation offer the potential for significant advancements in cochlear implant-mediated music perception. Copyright © 2013 Elsevier B.V. All rights reserved.

BIM: enabling sustainability and asset management through knowledge management.

Science.gov (United States)

Kivits, Robbert Anton; Furneaux, Craig

2013-11-10

Building Information Modeling (BIM) is the use of virtual building information models to develop building design solutions and design documentation and to analyse construction processes. Recent advances in IT have enabled advanced knowledge management, which in turn facilitates sustainability and improves asset management in the civil construction industry. There are several important qualifiers and some disadvantages of the current suite of technologies. This paper outlines the benefits, enablers, and barriers associated with BIM and makes suggestions about how these issues may be addressed. The paper highlights the advantages of BIM, particularly the increased utility and speed, enhanced fault finding in all construction phases, and enhanced collaborations and visualisation of data. The paper additionally identifies a range of issues concerning the implementation of BIM as follows: IP, liability, risks, and contracts and the authenticity of users. Implementing BIM requires investment in new technology, skills training, and development of new ways of collaboration and Trade Practices concerns. However, when these challenges are overcome, BIM as a new information technology promises a new level of collaborative engineering knowledge management, designed to facilitate sustainability and asset management issues in design, construction, asset management practices, and eventually decommissioning for the civil engineering industry.

Virtual Mission Operations Center -Explicit Access to Small Satellites by a Net Enabled User Base

Science.gov (United States)

Miller, E.; Medina, O.; Paulsen, P.; Hopkins, J.; Long, C.; Holloman, K.

2008-08-01

The Office of Naval Research (ON R), The Office of the Secr etary of Defense (OSD) , Th e Operationally Responsive Space Off ice (ORS) , and th e National Aeronautics and Space Administration (NASA) are funding the development and integration of key technologies and new processes that w ill allow users across th e bread th of operations the ab ility to access, task , retr ieve, and collaborate w ith data from various sensors including small satellites v ia the Intern et and the SIPRnet. The V irtual Mission Oper ations Center (VMO C) facilitates the dynamic apportionmen t of space assets, allows scalable mission man agement of mu ltiple types of sensors, and provid es access for non-space savvy users through an intu itive collaborative w eb site. These key technologies are b eing used as experimentation pathfinders fo r th e Do D's Operationally Responsiv e Sp ace (O RS) initiative and NASA's Sensor W eb. The O RS initiative seeks to provide space assets that can b e rapid ly tailored to meet a commander's in telligen ce or commun ication needs. For the DoD and NASA the V MO C provid es ready and scalab le access to space b ased assets. To the commercial space sector the V MO C may provide an analog to the innovativ e fractional ownersh ip approach represen ted by FlexJet. This pap er delves in to the technology, in tegration, and applicability of th e V MO C to th e DoD , NASA , and co mmer cial sectors.

A Tokenization-Based Communication Architecture for HCE-Enabled NFC Services

Directory of Open Access Journals (Sweden)

Busra Ozdenizci

2016-01-01

Full Text Available Following the announcement of Host Card Emulation (HCE technology, card emulation mode based Near Field Communication (NFC services have gained further appreciation as an enabler of the Cloud-based Secure Element (SE concept. A comprehensive and complete architecture with a centralized and feasible business model for diverse HCE-based NFC services will be highly appreciated, particularly by Service Providers and users. To satisfy the need in this new emerging research area, a Tokenization-based communication architecture for HCE-based NFC services is presented in this paper. Our architecture proposes Two-Phased Tokenization to enable the identity management of both user and Service Provider. NFC Smartphone users can store, manage, and make use of their sensitive data on the Cloud for NFC services; Service Providers can also provide diverse card emulation NFC services easily through the proposed architecture. In this paper, we initially present the Two-Phased Tokenization model and then validate the proposed architecture by providing a case study on access control. We further evaluate the usability aspect in terms of an authentication scheme. We then discuss the ecosystem and business model comprised of the proposed architecture and emphasize the contributions to ecosystem actors. Finally, suggestions are provided for data protection in transit and at rest.

Enabling Routes as Context in Mobile Services

DEFF Research Database (Denmark)

Brilingaite, Agne; Jensen, Christian Søndergaard; Zokaite, Nora

2004-01-01

With the continuing advances in wireless communications, geo-positioning, and portable electronics, an infrastructure is emerging that enables the delivery of on-line, location-enabled services to very large numbers of mobile users. A typical usage situation for mobile services is one characterized...... by a small screen and no keyboard, and by the service being only a secondary focus of the user. It is therefore particularly important to deliver the "right" information and service at the right time, with as little user interaction as possible. This may be achieved by making services context aware.Mobile...

Novel enabling technologies of gene isolation and plant transformation for improved crop protection

Energy Technology Data Exchange (ETDEWEB)

Torok, Tamas

2013-02-04

Meeting the needs of agricultural producers requires the continued development of improved transgenic crop protection products. The completed project focused on developing novel enabling technologies of gene discovery and plant transformation to facilitate the generation of such products.

Technology-enabled management of communication and swallowing disorders in Parkinson's disease: a systematic scoping review.

Science.gov (United States)

Theodoros, Deborah; Aldridge, Danielle; Hill, Anne J; Russell, Trevor

2018-06-19

Communication and swallowing disorders are highly prevalent in people with Parkinson's disease (PD). Maintenance of functional communication and swallowing over time is challenging for the person with PD and their families and may lead to social isolation and reduced quality of life if not addressed. Speech and language therapists (SLTs) face the conundrum of providing sustainable and flexible services to meet the changing needs of people with PD. Motor, cognitive and psychological issues associated with PD, medication regimens and dependency on others often impede attendance at a centre-based service. The access difficulties experienced by people with PD require a disruptive service approach to meet their needs. Technology-enabled management using information and telecommunications technologies to provide services at a distance has the potential to improve access, and enhance the quality of SLT services to people with PD. To report the status and scope of the evidence for the use of technology in the management of the communication and swallowing disorders associated with PD. Studies were retrieved from four major databases (PubMed, CINAHL, EMBASE and Medline via Web of Science). Data relating to the types of studies, level of evidence, context, nature of the management undertaken, participant perspectives and the types of technologies involved were extracted for the review. A total of 17 studies were included in the review, 15 of which related to the management of communication and swallowing disorders in PD with two studies devoted to participant perspectives. The majority of the studies reported on the treatment of the speech disorder in PD using Lee Silverman Voice Treatment (LSVT LOUD ® ). Synchronous and asynchronous technologies were used in the studies with a predominance of the former. There was a paucity of research in the management of cognitive-communication and swallowing disorders. Research evidence supporting technology-enabled management of the

Enabling Patient Control of Personal Electronic Health Records Through Distributed Ledger Technology.

Science.gov (United States)

Cunningham, James; Ainsworth, John

2017-01-01

The rise of distributed ledger technology, initiated and exemplified by the Bitcoin blockchain, is having an increasing impact on information technology environments in which there is an emphasis on trust and security. Management of electronic health records, where both conformation to legislative regulations and maintenance of public trust are paramount, is an area where the impact of these new technologies may be particularly beneficial. We present a system that enables fine-grained personalized control of third-party access to patients' electronic health records, allowing individuals to specify when and how their records are accessed for research purposes. The use of the smart contract based Ethereum blockchain technology to implement this system allows it to operate in a verifiably secure, trustless, and openly auditable environment, features crucial to health information systems moving forward.

BARRIERS AND MOTIVATORS IN ENGAGING WITH TECHNOLOGY-ENABLED CARDIAC REHABILITATION: A PATIENT AND HEALTH PROFESSIONAL PERSPECTIVE.

Directory of Open Access Journals (Sweden)

Deirdre Walsh

2015-10-01

This formative work has outlined key patient and stakeholder concerns regarding engagement with a technology enabled behavior change intervention in CR. Factors that inhibit and promote engagement have been explored using the COM-B framework. Motivational factors related to social interaction were deemed one of the integral aspects for engagement and adherence to PATHway. In terms of capability factors, technology ease- of-use was highlighted among patient and stakeholders as important for uptake and continued use. This project has received funding from the European Union’s Horizon 2020 Framework Programme for Research and Innovation Action under Grant Agreement no. 643491. PATHway: Technology enabled behavioural change as a pathway towards better self-management of CVD (www.pathway2health.eu

Free and open source enabling technologies for patient-centric, guideline-based clinical decision support: a survey.

Science.gov (United States)

Leong, T Y; Kaiser, K; Miksch, S

2007-01-01

Guideline-based clinical decision support is an emerging paradigm to help reduce error, lower cost, and improve quality in evidence-based medicine. The free and open source (FOS) approach is a promising alternative for delivering cost-effective information technology (IT) solutions in health care. In this paper, we survey the current FOS enabling technologies for patient-centric, guideline-based care, and discuss the current trends and future directions of their role in clinical decision support. We searched PubMed, major biomedical informatics websites, and the web in general for papers and links related to FOS health care IT systems. We also relied on our background and knowledge for specific subtopics. We focused on the functionalities of guideline modeling tools, and briefly examined the supporting technologies for terminology, data exchange and electronic health record (EHR) standards. To effectively support patient-centric, guideline-based care, the computerized guidelines and protocols need to be integrated with existing clinical information systems or EHRs. Technologies that enable such integration should be accessible, interoperable, and scalable. A plethora of FOS tools and techniques for supporting different knowledge management and quality assurance tasks involved are available. Many challenges, however, remain in their implementation. There are active and growing trends of deploying FOS enabling technologies for integrating clinical guidelines, protocols, and pathways into the main care processes. The continuing development and maturation of such technologies are likely to make increasingly significant contributions to patient-centric, guideline-based clinical decision support.

EconBiz — Meeting User Needs with New Technology

Directory of Open Access Journals (Sweden)

Tamara Pianos

2010-08-01

Full Text Available Virtual libraries try to combine traditional library services with new document types and services. The first generation of virtual libraries mostly tried to offer services based on a library-centric view of information retrieval systems. New virtual libraries try to concentrate on user's needs, but this is often easier said than done. Restrictions like copyright laws, technical limitations and the like often make it difficult to meet user requirements. A number of studies documented these needs: easy-to-use, comprehensive yet focussed search, and easy access to print and online documents, subject specific, yet not too restricted to specific areas. The new EconBiz-portal, relaunched in August 2010, has a disciplinary focus on business and economics and related subjects. It includes about 6 million records from different databases. Based on search-engine technology Lucene/Solr, combined with a metadata framework developed by the ZBW, it allows fast, convenient and complex searches. The integration of the Standard-Thesaurus-for Economics supports researchers by suggesting key words and related terms. Information on the availability of the documents is also included. Documents can either be accessed online or ways are shown to material that is available in print only. Journals Online & Print, a service developed by the German Electronic Journals Library (EZB and the German Union Catalogue of Serials (ZDB is included to provide easy access to all forms of journals. In addition, services like an event calendar, a tutorial on how to find information and an online-reference desk help to cater to the user's complex needs. The new EconBiz-portal was developed by the ZBW in close cooperation with the USB Cologne. Major parts of the search engine framework were developed by a company specialized in information technology. This paper elaborates on the extraction of users' requirements from different studies, the deduction of functional requirements, and

Distracted: Academic Performance Differences between Teen Users and Non-Users of MySpace and other Communication Technology

Directory of Open Access Journals (Sweden)

Tamyra A. Pierce

2008-06-01

Full Text Available This study examined the differences in academic performance between teen users and non-users of various communication technologies. Participants included 517 high school students who completed a self-report survey. The results revealed that approximately 3/4 of the teens had a MySpace account and a cell phone and more than 1/2 had an IM account. Results also showed that those who had a MySpace account, cell phone and IM had signifi cantly lower grades than those who did not. Results also revealed that teens who used their MySpace, cell phone and IM while doing their homework reported having lower grades than those who did not use the technology while doing their homework. In addition, those who put off doing their homework to spend time on MySpace also reported lower grades than those who did not put off doing their homework to spend time with MySpace. Finally, results showed that 28% text messaged during class from always to frequently, and 5% reported text messaging during an exam from always to frequently.

The Users' Views on Different Types of Instructional Materials Provided in Virtual Reality Technologies

Science.gov (United States)

Yildirim, Gürkan

2017-01-01

Today, it is seen that developing technologies are tried to be used continuously in the learning environments. These technologies have rapidly been diversifying and changing. Recently, virtual reality technology has become one of the technologies that experts have often been dwelling on. The present research tries to determine users' opinions and…

The role of electricity storage and hydrogen technologies in enabling global low-carbon energy transitions

OpenAIRE

McPherson, M.; Johnson, N.; Strubegger, M.

2018-01-01

Previous studies have noted the importance of electricity storage and hydrogen technologies for enabling large-scale variable renewable energy (VRE) deployment in long-term climate change mitigation scenarios. However, global studies, which typically use integrated assessment models, assume a fixed cost trajectory for storage and hydrogen technologies; thereby ignoring the sensitivity of VRE deployment and/or mitigation costs to uncertainties in future storage and hydrogen technology costs. Y...

[Medical doctors driving technological innovation: questions about and innovation management approaches to incentive structures for lead users].

Science.gov (United States)

Bohnet-Joschko, Sabine; Kientzler, Fionn

2010-01-01

Management science defines user-generated innovations as open innovation and lead user innovation. The medical technology industry finds user-generated innovations profitable and even indispensable. Innovative medical doctors as lead users need medical technology innovations in order to improve patient care. Their motivation to innovate is mostly intrinsic. But innovations may also involve extrinsic motivators such as gain in reputation or monetary incentives. Medical doctors' innovative activities often take place in hospitals and are thus embedded into the hospital's organisational setting. Hospitals find it difficult to gain short-term profits from in-house generated innovations and sometimes hesitate to support them. Strategic investment in medical doctors' innovative activities may be profitable for hospitals in the long run if innovations provide first-mover competitive advantages. Industry co-operations with innovative medical doctors offer chances but also bear potential risks. Innovative ideas generated by expert users may result in even higher complexity of medical devices; this could cause mistakes when applied by less specialised users and thus affect patient safety. Innovations that yield benefits for patients, medical doctors, hospitals and the medical technology industry can be advanced by offering adequate support for knowledge transfer and co-operation models.

Applications of Organic and Printed Electronics A Technology-Enabled Revolution

CERN Document Server

2013-01-01

Organic and printed electronics can enable a revolution in the applications of electronics and this book offers readers an overview of the state-of-the-art in this rapidly evolving domain.  The potentially low cost, compatibility with flexible substrates and the wealth of devices that characterize organic and printed electronics will make possible applications that go far beyond the well-known displays made with large-area silicon electronics. Since organic electronics are still in their early stage, undergoing transition from lab-scale and prototype activities to production, this book serves as a valuable snapshot of the current landscape of the different devices enabled by this technology, reviewing all applications that are developing and those can be foreseen.   Provides a complete roadmap for organic and printed electronics research and development for the next several years; Includes an overview of the printing processes for organic electronics, along with state of the art applications, such as solar ...

The X-Factor of Cultivating Successful Entrepreneurial Technology-Enabled Start-Ups

Directory of Open Access Journals (Sweden)

Elsje Scott

2016-10-01

Full Text Available In the fast changing global economic landscape, the cultivation of sustainable entrepreneurial ventures is seen as a vital mechanism that will enable businesses to introduce new innovative products to the market faster and more effectively than their competitors. This research paper investigated phenomena that may play a significant role when entrepreneurs implement creative ideas resulting in successful technology enabled start-ups within the South African market place. Constant and significant changes in technology provide several challenges for entrepreneurship. Various themes such as innovation, work experience, idea generation, education and partnership formation have been explored to assess their impact on entrepreneurship. Reflection and a design thinking approach underpinned a rigorous analysis process to distill themes from the data gathered through semi structured interviews. From the findings it was evident that the primary success influencers include the formation of partnership, iterative cycles, and certain types of education. The secondary influencers included the origination of an idea, the use of innovation. and organizational culture as well as work experience. This research illustrates how Informing Science as a transdisicpline can provide a philosophical underpinning to communicate and synthesise ideas from constituent disciplines in an attempt to create a more cohesive whole. This diverse environment, comprising people, technology, and business, requires blending different elements from across diverse fields to yield better science. With this backdrop, this preliminary study provides an important foundation for further research in the context of a developing country where entrepreneurial ventures may have a socio-economical impact. The themes that emerged through this study could provide avenues for further research.

User Adaptive and Context-Aware Smart Home Using Pervasive and Semantic Technologies

Directory of Open Access Journals (Sweden)

Aggeliki Vlachostergiou

2016-01-01

Full Text Available Ubiquitous Computing is moving the interaction away from the human-computer paradigm and towards the creation of smart environments that users and things, from the IoT perspective, interact with. User modeling and adaptation is consistently present having the human user as a constant but pervasive interaction introduces the need for context incorporation towards context-aware smart environments. The current article discusses both aspects of the user modeling and adaptation as well as context awareness and incorporation into the smart home domain. Users are modeled as fuzzy personas and these models are semantically related. Context information is collected via sensors and corresponds to various aspects of the pervasive interaction such as temperature and humidity, but also smart city sensors and services. This context information enhances the smart home environment via the incorporation of user defined home rules. Semantic Web technologies support the knowledge representation of this ecosystem while the overall architecture has been experimentally verified using input from the SmartSantander smart city and applying it to the SandS smart home within FIRE and FIWARE frameworks.

Enabling Pro-Active User-Centered Recommender Systems: An Initial Evaluation

NARCIS (Netherlands)

D.C.A. Bulterman (Dick); P.S. Cesar Garcia (Pablo Santiago); A.J. Jansen (Jack); H. Knoche; W. Seager

2007-01-01

htmlabstractTraditionally, an end-user has played only a passive role when viewing commercial media: he/she is expected to consume content, not interact with it. In this paper we explore advanced user interaction techniques in the home environment. One example of such advanced interaction is the

Enabling technologies and green processes in cyclodextrin chemistry

Directory of Open Access Journals (Sweden)

Giancarlo Cravotto

2016-02-01

Full Text Available The design of efficient synthetic green strategies for the selective modification of cyclodextrins (CDs is still a challenging task. Outstanding results have been achieved in recent years by means of so-called enabling technologies, such as microwaves, ultrasound and ball mills, that have become irreplaceable tools in the synthesis of CD derivatives. Several examples of sonochemical selective modification of native α-, β- and γ-CDs have been reported including heterogeneous phase Pd- and Cu-catalysed hydrogenations and couplings. Microwave irradiation has emerged as the technique of choice for the production of highly substituted CD derivatives, CD grafted materials and polymers. Mechanochemical methods have successfully furnished greener, solvent-free syntheses and efficient complexation, while flow microreactors may well improve the repeatability and optimization of critical synthetic protocols.

Enabling Campus Grids with Open Science Grid Technology

International Nuclear Information System (INIS)

Weitzel, Derek; Fraser, Dan; Pordes, Ruth; Bockelman, Brian; Swanson, David

2011-01-01

The Open Science Grid is a recognized key component of the US national cyber-infrastructure enabling scientific discovery through advanced high throughput computing. The principles and techniques that underlie the Open Science Grid can also be applied to Campus Grids since many of the requirements are the same, even if the implementation technologies differ. We find five requirements for a campus grid: trust relationships, job submission, resource independence, accounting, and data management. The Holland Computing Center's campus grid at the University of Nebraska-Lincoln was designed to fulfill the requirements of a campus grid. A bridging daemon was designed to bring non-Condor clusters into a grid managed by Condor. Condor features which make it possible to bridge Condor sites into a multi-campus grid have been exploited at the Holland Computing Center as well.

GeoPro: Technology to Enable Scientific Modeling

International Nuclear Information System (INIS)

C. Juan

2004-01-01

Development of the ground-water flow model for the Death Valley Regional Groundwater Flow System (DVRFS) required integration of numerous supporting hydrogeologic investigations. The results from recharge, discharge, hydraulic properties, water level, pumping, model boundaries, and geologic studies were integrated to develop the required conceptual and 3-D framework models, and the flow model itself. To support the complex modeling process and the needs of the multidisciplinary DVRFS team, a hardware and software system called GeoPro (Geoscience Knowledge Integration Protocol) was developed. A primary function of GeoPro is to manage the large volume of disparate data compiled for the 100,000-square-kilometer area of southern Nevada and California. The data are primarily from previous investigations and regional flow models developed for the Nevada Test Site and Yucca Mountain projects. GeoPro utilizes relational database technology (Microsoft SQL Server(trademark)) to store and manage these tabular point data, groundwater flow model ASCII data, 3-D hydrogeologic framework data, 2-D and 2.5-D GIS data, and text documents. Data management consists of versioning, tracking, and reporting data changes as multiple users access the centralized database. GeoPro also supports the modeling process by automating the routine data transformations required to integrate project software. This automation is also crucial to streamlining pre- and post-processing of model data during model calibration. Another function of GeoPro is to facilitate the dissemination and use of the model data and results through web-based documents by linking and allowing access to the underlying database and analysis tools. The intent is to convey to end-users the complex flow model product in a manner that is simple, flexible, and relevant to their needs. GeoPro is evolving from a prototype system to a production-level product. Currently the DVRFS pre- and post-processing modeling tools are being re

User-friendly technology to help family carers cope.

Science.gov (United States)

Chambers, Mary; Connor, Samantha L

2002-12-01

Increases in the older adult population are occurring simultaneously with a growth in new technology. Modern technology presents an opportunity to enhance the quality of life and independence of older people and their family carers through communication and access to health care information. To evaluate the usability of a multimedia software application designed to provide family carers of the elderly or disabled with information, advice and psychological support to increase their coping capacity. The interactive application consisted of an information-based package that provided carers with advice on the promotion of psychological health, including relaxation and other coping strategies. The software application also included a carer self-assessment instrument, designed to provide both family and professional carers with information to assess how family carers were coping with their care-giving role. Usability evaluation was carried out in two stages. In the first stage (verification), user trials and an evaluation questionnaire were used to refine and develop the content and usability of the multimedia software application. In the second (demonstration), stage evaluation questionnaires were used to appraise the usability of the modified software application. The findings evidenced that the majority of users found the software to be usable and informative. Some areas were highlighted for improvement in the navigation of the software. The authors conclude that with further refinement, the software application has the potential to offer information and support to those who are caring for the elderly and disabled at home.

Digital watermarking opportunities enabled by mobile media proliferation

Science.gov (United States)

Modro, Sierra; Sharma, Ravi K.

2009-02-01

Consumer usages of mobile devices and electronic media are changing. Mobile devices now include increased computational capabilities, mobile broadband access, better integrated sensors, and higher resolution screens. These enhanced features are driving increased consumption of media such as images, maps, e-books, audio, video, and games. As users become more accustomed to using mobile devices for media, opportunities arise for new digital watermarking usage models. For example, transient media, like images being displayed on screens, could be watermarked to provide a link between mobile devices. Applications based on these emerging usage models utilizing watermarking can provide richer user experiences and drive increased media consumption. We describe the enabling factors and highlight a few of the usage models and new opportunities. We also outline how the new opportunities are driving further innovation in watermarking technologies. We discuss challenges in market adoption of applications based on these usage models.

Hacktivism 1-2-3: how privacy enhancing technologies change the face of anonymous hacktivism

NARCIS (Netherlands)

Bodó, B.

2014-01-01

This short essay explores how the notion of hacktivism changes due to easily accessible, military grade Privacy Enhancing Technologies (PETs). Privacy Enhancing Technologies, technological tools which provide anonymous communications and protect users from online surveillance enable new forms of

On the security of SSL/TLS-enabled applications

Directory of Open Access Journals (Sweden)

Manik Lal Das

2014-01-01

Full Text Available SSL/TLS (Secure Socket Layer/Transport Layer Security-enabled web applications aim to provide public key certificate based authentication, secure session key establishment, and symmetric key based traffic confidentiality. A large number of electronic commerce applications, such as stock trading, banking, shopping, and gaming rely on the security strength of the SSL/TLS protocol. In recent times, a potential threat, known as main-in-the-middle (MITM attack, has been exploited by attackers of SSL/TLS-enabled web applications, particularly when naive users want to connect to an SSL/TLS-enabled web server. In this paper, we discuss about the MITM threat to SSL/TLS-enabled web applications. We review the existing space of solutions to counter the MITM attack on SSL/TLS-enabled applications, and then, we provide an effective solution which can resist the MITM attack on SSL/TLS-enabled applications. The proposed solution uses a soft-token based approach for user authentication on top of the SSL/TLS’s security features. We show that the proposed solution is secure, efficient and user friendly in comparison to other similar approaches.

Advanced light source technologies that enable high-volume manufacturing of DUV lithography extensions

Science.gov (United States)

Cacouris, Theodore; Rao, Rajasekhar; Rokitski, Rostislav; Jiang, Rui; Melchior, John; Burfeindt, Bernd; O'Brien, Kevin

2012-03-01

Deep UV (DUV) lithography is being applied to pattern increasingly finer geometries, leading to solutions like double- and multiple-patterning. Such process complexities lead to higher costs due to the increasing number of steps required to produce the desired results. One of the consequences is that the lithography equipment needs to provide higher operating efficiencies to minimize the cost increases, especially for producers of memory devices that experience a rapid decline in sales prices of these products over time. In addition to having introduced higher power 193nm light sources to enable higher throughput, we previously described technologies that also enable: higher tool availability via advanced discharge chamber gas management algorithms; improved process monitoring via enhanced on-board beam metrology; and increased depth of focus (DOF) via light source bandwidth modulation. In this paper we will report on the field performance of these technologies with data that supports the desired improvements in on-wafer performance and operational efficiencies.

New Content Addressable Memory (CAM) Technologies for Big Data and Intelligent Electronics Enabled by Magneto-Electric Ternary CAM

Science.gov (United States)

2017-12-11

AFRL-RY-WP-TR-2017-0198 NEW CONTENT ADDRESSABLE MEMORY (CAM) TECHNOLOGIES FOR BIG DATA AND INTELLIGENT ELECTRONICS ENABLED BY MAGNETO-ELECTRIC...MEMORY (CAM) TECHNOLOGIES FOR BIG DATA AND INTELLIGENT ELECTRONICS ENABLED BY MAGNETO-ELECTRIC TERNARY CAM 5a. CONTRACT NUMBER FA8650-16-1-7655 5b... electronic applications, such as internet of things, big data, wireless sensors, and mobile devices, have begun to focus on the importance of energy

End User Development Toolkit for Developing Physical User Interface Applications

OpenAIRE

Abrahamsen, Daniel T; Palfi, Anders; Svendsen, Haakon Sønsteby

2014-01-01

BACKGROUND: Tangible user interfaces and end user development are two increasingresearch areas in software technology. Physical representation promoteopportunities to ease the use of technology and reinforce personality traits ascreativeness, collaboration and intuitive actions. However, designing tangibleuser interfaces are both cumbersome and require several layers of architecture.End user development allows users with no programming experience to createor customize their own applications. ...

Exploring students’ uses of and dispositions towards learning technologies in an Australian enabling course

Directory of Open Access Journals (Sweden)

Rhian Morgan

2018-02-01

Full Text Available University progression is increasingly dependent upon students developing a range of digital literacies in conjunction with the skills associated with their disciplines. University enabling and pathway programs, in particular, have a key part to play in supporting students to interact with technologies for learning. Widening participation and increased student diversity result in highly variable levels of digital literacy in the classroom. As such, universities need to develop strategies to effectively respond to the differing abilities of students entering the sector. This paper contributes to the development of such responses through a case study exploring students’ use of and dispositions towards technologies in an open access enabling course. In this context ‘open access’ refers to the course admission requirements and the fact that the course enrollments are open to anyone over the age of eighteen, regardless of their prior schooling experience. The paper identifies trends in students’ uses of technology, such as preferences for mobile content and blended learning environments, before concluding with a discussion of how these findings can be mobilised in curriculum development.

BIM: Enabling Sustainability and Asset Management through Knowledge Management

Directory of Open Access Journals (Sweden)

Robbert Anton Kivits

2013-01-01

Full Text Available Building Information Modeling (BIM is the use of virtual building information models to develop building design solutions and design documentation and to analyse construction processes. Recent advances in IT have enabled advanced knowledge management, which in turn facilitates sustainability and improves asset management in the civil construction industry. There are several important qualifiers and some disadvantages of the current suite of technologies. This paper outlines the benefits, enablers, and barriers associated with BIM and makes suggestions about how these issues may be addressed. The paper highlights the advantages of BIM, particularly the increased utility and speed, enhanced fault finding in all construction phases, and enhanced collaborations and visualisation of data. The paper additionally identifies a range of issues concerning the implementation of BIM as follows: IP, liability, risks, and contracts and the authenticity of users. Implementing BIM requires investment in new technology, skills training, and development of new ways of collaboration and Trade Practices concerns. However, when these challenges are overcome, BIM as a new information technology promises a new level of collaborative engineering knowledge management, designed to facilitate sustainability and asset management issues in design, construction, asset management practices, and eventually decommissioning for the civil engineering industry.

BIM: Enabling Sustainability and Asset Management through Knowledge Management

Science.gov (United States)

2013-01-01

Building Information Modeling (BIM) is the use of virtual building information models to develop building design solutions and design documentation and to analyse construction processes. Recent advances in IT have enabled advanced knowledge management, which in turn facilitates sustainability and improves asset management in the civil construction industry. There are several important qualifiers and some disadvantages of the current suite of technologies. This paper outlines the benefits, enablers, and barriers associated with BIM and makes suggestions about how these issues may be addressed. The paper highlights the advantages of BIM, particularly the increased utility and speed, enhanced fault finding in all construction phases, and enhanced collaborations and visualisation of data. The paper additionally identifies a range of issues concerning the implementation of BIM as follows: IP, liability, risks, and contracts and the authenticity of users. Implementing BIM requires investment in new technology, skills training, and development of new ways of collaboration and Trade Practices concerns. However, when these challenges are overcome, BIM as a new information technology promises a new level of collaborative engineering knowledge management, designed to facilitate sustainability and asset management issues in design, construction, asset management practices, and eventually decommissioning for the civil engineering industry. PMID:24324392

User profiles and personas in the design and development of consumer health technologies.

Science.gov (United States)

LeRouge, Cynthia; Ma, Jiao; Sneha, Sweta; Tolle, Kristin

2013-11-01

"The graying of the globe" has resulted in exponential rise in health care expenses, over-worked health care professionals and a growing patient base suffering from multiple chronic diseases, one of which is diabetes. Consumer health technologies (CHT) are considered important catalysts for empowering health care consumers to take a proactive role in managing their health and related costs. Adoption rate and usability of such devices among the aging is far from being satisfactory. Past studies noted the motivation for adoption by the aging is dependent on the suitability/relevance, perceived usability and anticipated benefits associated with usage of technological innovation. Traditional information technology (IT) development adopts a systematic approach without necessarily using a specific user model that personalizes the system to the aging user groups. The aging patient population has unique needs arising from progressive deterioration in both physiological and psychological abilities. These needs are often ignored in the design, development, trial and adoption of consumer health products resulting in low adoption and usage. The main objective of this research is to investigate the user-centered design (UCD), specifically user profiles and personas, as methodological tools to inform the design and development of CHT devices for an aging population. The adoption of user profile and persona has not received much attention in health care informatics research and, in particular, research involving CHT. Our work begins to fill this void in three ways. We (1) illuminate the process of developing CHT user profiles and personas for a Chinese elder population with a demanding health care needs, i.e., self-management of chronic diabetes, with the hope that the resulting profiles and personas may be used as foundational material for informing the design, development and evaluation of CHT in other similar contexts; (2) call attention to how to further enhance and

Information literacy of the academic library users

Directory of Open Access Journals (Sweden)

Sanda Hasenay

2016-03-01

Full Text Available Information literacy should be a foundation of any educational system, which would enable students and library users a more efficient way to perform academically and in everyday life. The research goal was to determine the level of information literacy among the students, users of the Library of Faculty of Food and Technology Osijek (PTFOS. A special survey – quiz was used to determine students’ knowledge of library collection and services. The sample of 115 students was surveyed between 16th and 27th of February 2015. The library users are aware of the conditions of using the library collections as well as library services, but they don't read messages on the library's bulletin board, desks and web site. The research results will be used as guidelines for improving information literacy and future research.

Alliance group formation: enabling and constraining effects of embeddedness and social capital in strategic technology alliance networks

NARCIS (Netherlands)

Duysters, G.M.; Lemmens, C.E.A.V.

2003-01-01

The role of embeddedness and social capital in the process of alliance group formation in strategic technology alliance networks is examined. In particular, the social mechanisms that enable and enforce alliance group formation is studies. It is argued that the enabling effect of embeddedness during

Enabling campus grids with open science grid technology

Energy Technology Data Exchange (ETDEWEB)

Weitzel, Derek [Nebraska U.; Bockelman, Brian [Nebraska U.; Swanson, David [Nebraska U.; Fraser, Dan [Argonne; Pordes, Ruth [Fermilab

2011-01-01

The Open Science Grid is a recognized key component of the US national cyber-infrastructure enabling scientific discovery through advanced high throughput computing. The principles and techniques that underlie the Open Science Grid can also be applied to Campus Grids since many of the requirements are the same, even if the implementation technologies differ. We find five requirements for a campus grid: trust relationships, job submission, resource independence, accounting, and data management. The Holland Computing Center's campus grid at the University of Nebraska-Lincoln was designed to fulfill the requirements of a campus grid. A bridging daemon was designed to bring non-Condor clusters into a grid managed by Condor. Condor features which make it possible to bridge Condor sites into a multi-campus grid have been exploited at the Holland Computing Center as well.

Ensuring Energy Efficient 5G User Equipment by Technology Evolution and Reuse

DEFF Research Database (Denmark)

Lauridsen, Mads; Berardinelli, Gilberto; Sørensen, Troels Bundgaard

2014-01-01

the features’ pros and cons in achieving high performance in terms of data rate and/or latency while limiting their effect on the UE power consumption. Based on the discussion we give general recommendations for an energy efficient 5G design in the context of a previously proposed RAT concept.......Research on fifth generation (5G) radio access technology (RAT) is ramping up, with the goal of significantly improving user data rates and latency compared to previous radio generations. While energy efficiency (EE) of the user equipment (UE) was not a key optimization parameter for the current...... standards, it is anticipated to become a distinguishing factor for 5G. In this paper, we analyze established and emerging technological solutions for features such as waveform, frame structure, duplexing and multiple antenna transmission from an EE perspective. Our contribution is to identify and discuss...

The VERCE Science Gateway: enabling user friendly seismic waves simulations across European HPC infrastructures

Science.gov (United States)

Spinuso, Alessandro; Krause, Amy; Ramos Garcia, Clàudia; Casarotti, Emanuele; Magnoni, Federica; Klampanos, Iraklis A.; Frobert, Laurent; Krischer, Lion; Trani, Luca; David, Mario; Leong, Siew Hoon; Muraleedharan, Visakh

2014-05-01

The EU-funded project VERCE (Virtual Earthquake and seismology Research Community in Europe) aims to deploy technologies which satisfy the HPC and data-intensive requirements of modern seismology. As a result of VERCE's official collaboration with the EU project SCI-BUS, access to computational resources, like local clusters and international infrastructures (EGI and PRACE), is made homogeneous and integrated within a dedicated science gateway based on the gUSE framework. In this presentation we give a detailed overview on the progress achieved with the developments of the VERCE Science Gateway, according to a use-case driven implementation strategy. More specifically, we show how the computational technologies and data services have been integrated within a tool for Seismic Forward Modelling, whose objective is to offer the possibility to perform simulations of seismic waves as a service to the seismological community. We will introduce the interactive components of the OGC map based web interface and how it supports the user with setting up the simulation. We will go through the selection of input data, which are either fetched from federated seismological web services, adopting community standards, or provided by the users themselves by accessing their own document data store. The HPC scientific codes can be selected from a number of waveform simulators, currently available to the seismological community as batch tools or with limited configuration capabilities in their interactive online versions. The results will be staged out from the HPC via a secure GridFTP transfer to a VERCE data layer managed by iRODS. The provenance information of the simulation will be automatically cataloged by the data layer via NoSQL techonologies. We will try to demonstrate how data access, validation and visualisation can be supported by a general purpose provenance framework which, besides common provenance concepts imported from the OPM and the W3C-PROV initiatives, also offers

Social acceptance of solar energy technologies in China-End users' perspective

International Nuclear Information System (INIS)

Yuan Xueliang; Zuo Jian; Ma Chunyuan

2011-01-01

Energy is essential to human beings. The increasing demand of energy has triggered the public scrutiny on the sustainability issues associated with the energy production and transmission. There have been a large number of studies focusing on reducing the environmental impacts associated with the energy sector. Renewable energy sources such as solar energy have been prompted to mitigate these environmental impacts. This research adopted a quantitative approach to investigate the social acceptance of solar energy technologies from end users' perspective in Shandong province, China. A large scale questionnaire survey was conducted. The results show that there is a considerable high level of social acceptance and public awareness of solar water heater. However, another major application of solar energy, solar PV has not gained a high level of social acceptance or public awareness in Shandong. This study provides useful references for policy makers to further promote the utilization of solar energy innovations. - Research Highlights: → Social acceptance of solar energy technologies from end users' perspective is investigated by a large scale questionnaire survey. → Higher level of social acceptance and public awareness of solar water heater than solar PV. → Impact factors for social acceptance of solar energy technologies are analyzed.

A Technology Enabled Journey

Science.gov (United States)

Devine, Pamela Albert

2012-01-01

This article features Point Road School, a pre-K-4 school in New Jersey that enhances student learning by integrating new and emerging technologies into the curriculum. Point Road School's technology story began in 1996 with a grant for a classroom modem so students could email their university literacy buddies. The New Jersey school has moved…

Integrating Technology into Instruction at a Public University in Kyrgyzstan: Barriers and Enablers

Science.gov (United States)

Muhametjanova, Gulshat; Cagiltay, Kursat

2016-01-01

The purpose of this study was to determine enablers and barriers to the technology integration into education based on the example of the situation at the Kyrgyz-Turkish Manas University as reported by students and instructors. The study employed the mixed-methods research design, combining data obtained from 477 student and 57 instructor…

Load Disaggregation Technologies: Real World and Laboratory Performance

Energy Technology Data Exchange (ETDEWEB)

Mayhorn, Ebony T.; Sullivan, Greg P.; Petersen, Joseph M.; Butner, Ryan S.; Johnson, Erica M.

2016-09-28

Low cost interval metering and communication technology improvements over the past ten years have enabled the maturity of load disaggregation (or non-intrusive load monitoring) technologies to better estimate and report energy consumption of individual end-use loads. With the appropriate performance characteristics, these technologies have the potential to enable many utility and customer facing applications such as billing transparency, itemized demand and energy consumption, appliance diagnostics, commissioning, energy efficiency savings verification, load shape research, and demand response measurement. However, there has been much skepticism concerning the ability of load disaggregation products to accurately identify and estimate energy consumption of end-uses; which has hindered wide-spread market adoption. A contributing factor is that common test methods and metrics are not available to evaluate performance without having to perform large scale field demonstrations and pilots, which can be costly when developing such products. Without common and cost-effective methods of evaluation, more developed disaggregation technologies will continue to be slow to market and potential users will remain uncertain about their capabilities. This paper reviews recent field studies and laboratory tests of disaggregation technologies. Several factors are identified that are important to consider in test protocols, so that the results reflect real world performance. Potential metrics are examined to highlight their effectiveness in quantifying disaggregation performance. This analysis is then used to suggest performance metrics that are meaningful and of value to potential users and that will enable researchers/developers to identify beneficial ways to improve their technologies.

USER-UPLOADED IMAGES PRIVACY POLICY PREDICTION USING CLASSIFICATION AND POLICY MINING

OpenAIRE

Aishwarya Singh*; Sushmita Singh; Bhavesh Mandalkar

2016-01-01

Social media become one of the most essential part of our daily life as it enables us to be in touch with a lot of people. Creation of social networking sites such as LinkedIn, Facebook and MySpace give opportunities to communicate new peoples and friends in their own and also in the other various communities across the world. Users of social media share plenty of personal information with a large number of “friends.” These enhance technology leads to violations of privacy as the users are sh...

Enabling Routes as Context in Mobile Services

DEFF Research Database (Denmark)

Brilingaite, Agne; Jensen, Christian Søndergaard; Zokaite, Nora

With the continuing advances in wireless communications, geo-positioning, and portable electronics, an infrastructure is emerging that enables the delivery of on-line, location-enabled services to very large numbers of mobile users. A typical usage situation for mobile services is one characteriz...... and accumulates the routes of a user along with their usage patterns and that makes the routes available to services. Experiences from using the component on logs of GPS positions acquired from vehicles traveling within a real road network are reported....... by a small screen and no keyboard, and by the service being only a secondary focus of the user. Under such circumstances, it is particularly important to deliver the "right" information and service at the right time, with as little user interaction as possible. This may be achieved by making services context...

Characteristics and determinants of music appreciation in adult CI users.

Science.gov (United States)

Philips, Birgit; Vinck, Bart; De Vel, Eddy; Maes, Leen; D'Haenens, Wendy; Keppler, Hannah; Dhooge, Ingeborg

2012-03-01

The main objective of this study was to assess the associations between self-reported listening habits and perception of music and speech perception outcomes in quiet and noise for both unilateral cochlear implant (CI) users and bimodal (CI in one ear, hearing aid in contra-lateral ear) users. Information concerning music appreciation was gathered by means of a newly developed questionnaire. Moreover, audiological data (pure-tone audiometry, speech tests in noise and quiet) were gathered and the relationship between speech perception and music appreciation is studied. Bimodal users enjoy listening to music more in comparison with unilateral CI users. Also, music training within rehabilitation is still uncommon, while CI recipients believe that music training might be helpful to maximize their potential with current CI technology. Music training should not be exclusively reserved for the good speech performers. Therefore, a music training program (MTP) that consists of different difficulty levels should be developed. Hopefully, early implementation of MTP in rehabilitation programs can enable adult CI users to enjoy and appreciate music and to maximize their potential with commercially available technology. Furthermore, because bimodal users consider the bimodal stimulation to be the most enjoyable way to listen to music, CI users with residual hearing in the contra-lateral ear should be encouraged to continue wearing their hearing aid in that ear.

Case-study of a user-driven prosthetic arm design: bionic hand versus customized body-powered technology in a highly demanding work environment.

Science.gov (United States)

Schweitzer, Wolf; Thali, Michael J; Egger, David

2018-01-03

Prosthetic arm research predominantly focuses on "bionic" but not body-powered arms. However, any research orientation along user needs requires sufficiently precise workplace specifications and sufficiently hard testing. Forensic medicine is a demanding environment, also physically, also for non-disabled people, on several dimensions (e.g., distances, weights, size, temperature, time). As unilateral below elbow amputee user, the first author is in a unique position to provide direct comparison of a "bionic" myoelectric iLimb Revolution (Touch Bionics) and a customized body-powered arm which contains a number of new developments initiated or developed by the user: (1) quick lock steel wrist unit; (2) cable mount modification; (3) cast shape modeled shoulder anchor; (4) suspension with a soft double layer liner (Ohio Willowwood) and tube gauze (Molnlycke) combination. The iLimb is mounted on an epoxy socket; a lanyard fixed liner (Ohio Willowwood) contains magnetic electrodes (Liberating Technologies). An on the job usage of five years was supplemented with dedicated and focused intensive two-week use tests at work for both systems. The side-by-side comparison showed that the customized body-powered arm provides reliable, comfortable, effective, powerful as well as subtle service with minimal maintenance; most notably, grip reliability, grip force regulation, grip performance, center of balance, component wear down, sweat/temperature independence and skin state are good whereas the iLimb system exhibited a number of relevant serious constraints. Research and development of functional prostheses may want to focus on body-powered technology as it already performs on manually demanding and heavy jobs whereas eliminating myoelectric technology's constraints seems out of reach. Relevant testing could be developed to help expediting this. This is relevant as Swiss disability insurance specifically supports prostheses that enable actual work integration. Myoelectric and

Advances in the development of a cognitive user interface

Directory of Open Access Journals (Sweden)

Jokisch Oliver

2018-01-01

Full Text Available In this contribution, we want to summarize recent development steps of the embedded cognitive user interface UCUI, which enables a user-adaptive scenario in human-machine or even human-robot interactions by considering sophisticated cognitive and semantic modelling. The interface prototype is developed by different German institutes and companies with their steering teams at Fraunhofer IKTS and Brandenburg University of Technology. The interface prototype is able to communicate with users via speech and gesture recognition, speech synthesis and a touch display. The device includes an autarkic semantic processing and beyond a cognitive behavior control, which supports an intuitive interaction to control different kinds of electronic devices, e. g. in a smart home environment or in interactive respectively collaborative robotics. Contrary to available speech assistance systems such as Amazon Echo or Google Home, the introduced cognitive user interface UCUI ensures the user privacy by processing all necessary information without any network access of the interface device.

Health Information Technology Systems profoundly impact users: a case study in a dental school.

Science.gov (United States)

Hill, Heather K; Stewart, Denice C L; Ash, Joan S

2010-04-01

The purpose of this study was to increase our understanding of the impact of Health Information Technology Systems (HITS) on dental school users when the systems are integrated into chair-side patient care. We used qualitative research methods, including interviews, focus groups, and observations, to capture the experiences of HITS users at a single institution. Users included administrators, clinical faculty members, predoctoral students, support staff, and residents. The data were analyzed using a grounded theory approach, and nine themes emerged: 1) HITS benefits were disproportionate among users; 2) communicating about the HITS was challenging; 3) users experienced a range of strong emotions; 4) the instructor persona diminished; 5) there were shifts in the school's power structure; 6) allocation of end-users' time shifted; 7) the training and support needs of end-users were significant; 8) perceived lack of HITS usability made documentation cumbersome for clinicians; and 9) clinicians' workflow was disrupted. HITS integration into patient care impacts the work of all system users, especially end-users. The themes highlight areas of potential concern for implementers and users in integrating a HITS into patient care.

User constraints for reliable user-defined smart home scenarios

DEFF Research Database (Denmark)

Le Guilly, Thibaut; Nielsen, Michael Kvist; Pedersen, Thomas

2016-01-01

Defining control scenarios in a smart home is a difficult task for end users. In particular, one concern is that user-defined scenarios could lead to unsafe or undesired state of the system. To help them explore scenario specifications, we propose in this paper a system that enables specification...

ArrayWiki: an enabling technology for sharing public microarray data repositories and meta-analyses

Science.gov (United States)

Stokes, Todd H; Torrance, JT; Li, Henry; Wang, May D

2008-01-01

Background A survey of microarray databases reveals that most of the repository contents and data models are heterogeneous (i.e., data obtained from different chip manufacturers), and that the repositories provide only basic biological keywords linking to PubMed. As a result, it is difficult to find datasets using research context or analysis parameters information beyond a few keywords. For example, to reduce the "curse-of-dimension" problem in microarray analysis, the number of samples is often increased by merging array data from different datasets. Knowing chip data parameters such as pre-processing steps (e.g., normalization, artefact removal, etc), and knowing any previous biological validation of the dataset is essential due to the heterogeneity of the data. However, most of the microarray repositories do not have meta-data information in the first place, and do not have a a mechanism to add or insert this information. Thus, there is a critical need to create "intelligent" microarray repositories that (1) enable update of meta-data with the raw array data, and (2) provide standardized archiving protocols to minimize bias from the raw data sources. Results To address the problems discussed, we have developed a community maintained system called ArrayWiki that unites disparate meta-data of microarray meta-experiments from multiple primary sources with four key features. First, ArrayWiki provides a user-friendly knowledge management interface in addition to a programmable interface using standards developed by Wikipedia. Second, ArrayWiki includes automated quality control processes (caCORRECT) and novel visualization methods (BioPNG, Gel Plots), which provide extra information about data quality unavailable in other microarray repositories. Third, it provides a user-curation capability through the familiar Wiki interface. Fourth, ArrayWiki provides users with simple text-based searches across all experiment meta-data, and exposes data to search engine crawlers

Using Enabling Technologies to Advance Data Intensive Analysis Tools in the JPL Tropical Cyclone Information System

Science.gov (United States)

Knosp, B.; Gangl, M. E.; Hristova-Veleva, S. M.; Kim, R. M.; Lambrigtsen, B.; Li, P.; Niamsuwan, N.; Shen, T. P. J.; Turk, F. J.; Vu, Q. A.

2014-12-01

The JPL Tropical Cyclone Information System (TCIS) brings together satellite, aircraft, and model forecast data from several NASA, NOAA, and other data centers to assist researchers in comparing and analyzing data related to tropical cyclones. The TCIS has been supporting specific science field campaigns, such as the Genesis and Rapid Intensification Processes (GRIP) campaign and the Hurricane and Severe Storm Sentinel (HS3) campaign, by creating near real-time (NRT) data visualization portals. These portals are intended to assist in mission planning, enhance the understanding of current physical processes, and improve model data by comparing it to satellite and aircraft observations. The TCIS NRT portals allow the user to view plots on a Google Earth interface. To compliment these visualizations, the team has been working on developing data analysis tools to let the user actively interrogate areas of Level 2 swath and two-dimensional plots they see on their screen. As expected, these observation and model data are quite voluminous and bottlenecks in the system architecture can occur when the databases try to run geospatial searches for data files that need to be read by the tools. To improve the responsiveness of the data analysis tools, the TCIS team has been conducting studies on how to best store Level 2 swath footprints and run sub-second geospatial searches to discover data. The first objective was to improve the sampling accuracy of the footprints being stored in the TCIS database by comparing the Java-based NASA PO.DAAC Level 2 Swath Generator with a TCIS Python swath generator. The second objective was to compare the performance of four database implementations - MySQL, MySQL+Solr, MongoDB, and PostgreSQL - to see which database management system would yield the best geospatial query and storage performance. The final objective was to integrate our chosen technologies with our Joint Probability Density Function (Joint PDF), Wave Number Analysis, and

How user diversity and country of origin impact the readiness to adopt E-health technologies: an intercultural comparison.

Science.gov (United States)

Wilkowsk, Wiktoria; Ziefle, Martina; Alagöz, Firat

2012-01-01

In recent years, due to the demographical change and the resulting overload of healthcare systems, there has been an increasing interest focusing on the global proliferation of assistive medical technologies (=E-health) in home environments. The present study examines how users' diversity influences the readiness to adopt novel medical technologies, comparing users' attitudes in terms of perceived advantages and disadvantages in three technically and culturally different countries: Germany, Poland and Turkey. This investigation also intended to verify if acceptance of information and communication technologies is associated with the sensitive acceptance of E-health. Results revealed overall a considerably higher motivation to use medical technology compared to perceived barriers, with Polish users more willing to use E-health, higher than German or Turkish ones. Older participants showed a highly positive attitude, comparable to young and middle-aged respondents' receptiveness, differing from the latter in terms of greater appreciation of the advantage of higher independency when being supported by medical technology. With respect to gender, woman showed higher motivation to use E-health technology than men, although utilization barriers were not gendered. Following these results, an unconditional transfer of acceptance from information and communication to medical technology is not justified.

Supporting Pre-Service Teachers' Technology-Enabled Learning Design Thinking through Whole of Programme Transformation

Science.gov (United States)

Bower, Matt; Highfield, Kate; Furney, Pam; Mowbray, Lee

2013-01-01

This paper explains a development and evaluation project aimed at transforming two pre-service teacher education programmes at Macquarie University to more effectively cultivate students' technology-enabled learning design thinking. The process of transformation was based upon an explicit and sustained focus on developing university academics'…

Consumer Connectivity in a Complex, Technology-enabled, and Mobile-oriented World with Smart Products

NARCIS (Netherlands)

Verhoef, Peter C.; Stephen, Andrew T.; Kannan, P. K.; Luo, Xueming; Abhishek, Vibhanshu; Andrews, Michelle; Bart, Yakov; Datta, Hannes; Fong, Nathan; Hoffman, Donna L.; Hu, Mandy Mantian; Novak, Tom; Rand, William; Zhang, Yuchi

2017-01-01

Today's consumers are immersed in a vast and complex array of networks. Each network features an interconnected mesh of people and firms, and now, with the rise of the Internet of Things (IoT), also objects. Technology (particularly mobile devices) enables such connections, and facilitates many

Consumer connectivity in a complex, technology-enabled, and mobile-oriented world with smart products

NARCIS (Netherlands)

Verhoef, Peter C.; Stephen, Andrew T.; Kannan, P.K.; Luo, Xueming; Abishek, Vibhanshu; Andrews, Michelle; Bart, Yakov; Datta, Hannes; Fong, Nathan M.; Hoffman, Donna L.; Hu, Mandy; Novak, Thomas P.; Rand, William; Zhang, Yuchi

2017-01-01

Today’s consumers are immersed in a vast and complex array of networks. Each network features an interconnected mesh of people and firms, and now, with the rise of the Internet of Things (IoT), also objects. Technology (particularly mobile devices) enables such connections, and facilitates many

Influencing appraisals of emotional valence with spatial touchscreen interactions: An embodied approach to Positive Technology

OpenAIRE

Cervera Torres, Sergio

2017-01-01

Could bodily interactions with touchscreen interfaces influence users´s affective experiences? The present dissertation investigates, from an embodied perspective, the potential of touchscreen interfaces as "positive technologies". Positive Technology is an emergent research area within the fields of Cyberpsychology and Human-Computer Interaction interested in examining and promote the quality of user´s affective experiences. However, despite touchscreens enable the manipulation of digital co...

DOE's SciDAC Visualization and Analytics Center for EnablingTechnologies -- Strategy for Petascale Visual Data Analysis Success

Energy Technology Data Exchange (ETDEWEB)

Bethel, E Wes; Johnson, Chris; Aragon, Cecilia; Rubel, Oliver; Weber, Gunther; Pascucci, Valerio; Childs, Hank; Bremer, Peer-Timo; Whitlock, Brad; Ahern, Sean; Meredith, Jeremey; Ostrouchov, George; Joy, Ken; Hamann, Bernd; Garth, Christoph; Cole, Martin; Hansen, Charles; Parker, Steven; Sanderson, Allen; Silva, Claudio; Tricoche, Xavier

2007-10-01

The focus of this article is on how one group of researchersthe DOE SciDAC Visualization and Analytics Center for EnablingTechnologies (VACET) is tackling the daunting task of enabling knowledgediscovery through visualization and analytics on some of the world slargest and most complex datasets and on some of the world's largestcomputational platforms. As a Center for Enabling Technology, VACET smission is the creation of usable, production-quality visualization andknowledge discovery software infrastructure that runs on large, parallelcomputer systems at DOE's Open Computing facilities and that providessolutions to challenging visual data exploration and knowledge discoveryneeds of modern science, particularly the DOE sciencecommunity.

A phone-assistive device based on Bluetooth technology for cochlear implant users.

Science.gov (United States)

Qian, Haifeng; Loizou, Philipos C; Dorman, Michael F

2003-09-01

Hearing-impaired people, and particularly hearing-aid and cochlear-implant users, often have difficulty communicating over the telephone. The intelligibility of telephone speech is considerably lower than the intelligibility of face-to-face speech. This is partly because of lack of visual cues, limited telephone bandwidth, and background noise. In addition, cellphones may cause interference with the hearing aid or cochlear implant. To address these problems that hearing-impaired people experience with telephones, this paper proposes a wireless phone adapter that can be used to route the audio signal directly to the hearing aid or cochlear implant processor. This adapter is based on Bluetooth technology. The favorable features of this new wireless technology make the adapter superior to traditional assistive listening devices. A hardware prototype was built and software programs were written to implement the headset profile in the Bluetooth specification. Three cochlear implant users were tested with the proposed phone-adapter and reported good speech quality.

Readiness Factors and Consumer Acceptance of Technology in Mobile Telephony

Directory of Open Access Journals (Sweden)

Lucilla Andrade Sousa Cunha

2014-06-01

Full Text Available This study aims at analyzing the variables of use and contact of users regarding to products and services of mobile phone technology. Technological innovation stands in the enterprise, enabling growth and creation of new products and services. In the theoretical framework, we used the technology readiness model, from users beliefs and feelings represented by four dimensions: optimism, innovativeness, discomfort and insecurity. It also highlights the technology acceptance model and presents two important constructs as perceived usefulness and ease of use. In short, the factors that support the technology readiness model could be preceding the technology acceptance model. To conduct this study, a field survey of students at the Federal University of Uberlândia / Campus FACIP was carried out. Results indicate optimism as the main factor to accept new mobile technology, due to the fact that the mobile devices provide benefits to people's lives and prompt them a positive attitude toward mobile technology. The perception of the user to purchase a mobile device is directly related to its usefulness and ease of handling of the technology.

Enabling distributed petascale science

International Nuclear Information System (INIS)

Baranovski, Andrew; Bharathi, Shishir; Bresnahan, John

2007-01-01

Petascale science is an end-to-end endeavour, involving not only the creation of massive datasets at supercomputers or experimental facilities, but the subsequent analysis of that data by a user community that may be distributed across many laboratories and universities. The new SciDAC Center for Enabling Distributed Petascale Science (CEDPS) is developing tools to support this end-to-end process. These tools include data placement services for the reliable, high-performance, secure, and policy-driven placement of data within a distributed science environment; tools and techniques for the construction, operation, and provisioning of scalable science services; and tools for the detection and diagnosis of failures in end-to-end data placement and distributed application hosting configurations. In each area, we build on a strong base of existing technology and have made useful progress in the first year of the project. For example, we have recently achieved order-of-magnitude improvements in transfer times (for lots of small files) and implemented asynchronous data staging capabilities; demonstrated dynamic deployment of complex application stacks for the STAR experiment; and designed and deployed end-to-end troubleshooting services. We look forward to working with SciDAC application and technology projects to realize the promise of petascale science

Ultrafast disk technology enables next generation micromachining laser sources

Science.gov (United States)

Heckl, Oliver H.; Weiler, Sascha; Luzius, Severin; Zawischa, Ivo; Sutter, Dirk

2013-02-01

Ultrashort pulsed lasers based on thin disk technology have entered the 100 W regime and deliver several tens of MW peak power without chirped pulse amplification. Highest uptime and insensitivity to back reflections make them ideal tools for efficient and cost effective industrial micromachining. Frequency converted versions allow the processing of a large variety of materials. On one hand, thin disk oscillators deliver more than 30 MW peak power directly out of the resonator in laboratory setups. These peak power levels are made possible by recent progress in the scaling of the pulse energy in excess of 40 μJ. At the corresponding high peak intensity, thin disk technology profits from the limited amount of material and hence the manageable nonlinearity within the resonator. Using new broadband host materials like for example the sesquioxides will eventually reduce the pulse duration during high power operation and further increase the peak power. On the other hand industry grade amplifier systems deliver even higher peak power levels. At closed-loop controlled 100W, the TruMicro Series 5000 currently offers the highest average ultrafast power in an industry proven product, and enables efficient micromachining of almost any material, in particular of glasses, ceramics or sapphire. Conventional laser cutting of these materials often requires UV laser sources with pulse durations of several nanoseconds and an average power in the 10 W range. Material processing based on high peak power laser sources makes use of multi-photon absorption processes. This highly nonlinear absorption enables micromachining driven by the fundamental (1030 nm) or frequency doubled (515 nm) wavelength of Yb:YAG. Operation in the IR or green spectral range reduces the complexity and running costs of industrial systems initially based on UV light sources. Where UV wavelength is required, the TruMicro 5360 with a specified UV crystal life-time of more than 10 thousand hours of continues

Experience with technology dynamics of user experience with mobile media devices

CERN Document Server

al-Azzawi, Ali

2013-01-01

With a focus on gaining an empirically derived understanding of the underlying psychological dimensions and processes behind people’s experiences with technology, this book contributes to the debate of user experience (UX) within several disciplines, including HCI, design and marketing. It analyses UX dynamics at various time scales, and explores the very nature of time and meaning in the context of UX.Experience with Technology uses personal construct theory (PCT) as a theoretical and methodological starting point to this project. Major case-studies are described that examine people’s exp

Evaluating the limits of solar photovoltaics (PV) in electric power systems utilizing energy storage and other enabling technologies

International Nuclear Information System (INIS)

Denholm, Paul; Margolis, Robert M.

2007-01-01

In this work, we evaluate technologies that will enable solar photovoltaics (PV) to overcome the limits of traditional electric power systems. We performed simulations of a large utility system using hourly solar insolation and load data and attempted to provide up to 50% of this system's energy from PV. We considered several methods to avoid the limits of unusable PV that result at high penetration due to the use of inflexible baseload generators. The enabling technologies considered in this work are increased system flexibility, load shifting via demand responsive appliances, and energy storage

Self-management support interventions that are clinically linked and technology enabled: can they successfully prevent and treat diabetes?

Science.gov (United States)

Kaufman, Neal D; Woodley, Paula D Patnoe

2011-05-01

Patients with diabetes need a complex set of services and supports. The challenge of integrating these services into the diabetes regimen can be successfully overcome through self-management support interventions that are clinically linked and technology enabled: self-management support because patients need help mastering the knowledge, attitudes, skills, and behaviors so necessary for good outcomes; interventions because comprehensive theory-based, evidence-proven, long-term, longitudinal interventions work better than direct-to-consumer or nonplanned health promotion approaches; clinically linked because patients are more likely to adopt new behaviors when the approach is in the context of a trusted therapeutic relationship and within an effective medical care system; and technology enabled because capitalizing on the amazing power of information technology leads to the delivery of cost-effective, scalable, engaging solutions that prevent and manage diabetes. © 2011 Diabetes Technology Society.

Technology acceptance and purchase intention towards 3G technology among millennial smart phone users: A case of Pakistan

Directory of Open Access Journals (Sweden)

Muhammad Jasim

2016-11-01

Full Text Available This study aims to investigate the technology acceptance and purchase intention for Third Generation (3G technology in Pakistan’s telecom sector. In such respect, Technology Acceptance Model (TAM has been used to find the effects of the independent variables (Perceived Usefulness, Perceived Ease of Use, Perceived Value, Perceived Enjoyment, Personal Innovativeness and Price on dependent variable (purchase intention. The study population consisted of smartphone users among Millennials in district Haripur-a region in transition towards urbanization. 200 respondents provided the useable data. The results of the study show that perceived usefulness, perceived ease of use, perceived value, perceived enjoyment, personal innovativeness, and price have a significant and positive relationship with purchase intention which validates the growing acceptance of advanced technologies in such regions.

User Interface Technology to Reduce Mental Transformations for Tangible Remote Dismantling Simulator

Energy Technology Data Exchange (ETDEWEB)

Hyun, Dongjun; Kim, Ikjune; Lee, Jonghwan; Kim, Geun-Ho; Jeong, Kwan-Seong; Choi, Byung-Seon; Moon, Jeikwon; Choi, Jong-Won [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2015-10-15

High-level radiation of the major components restricts access by human workers, and makes an accident or outage during the dismantling process more difficult to deal with. Since unexpected situations causes waste of budget and an aggravation of safety, the preliminary verification of the dismantling processes and equipment by the tangible remote dismantling simulator is very important. The design optimization of the dismantling processes and equipment is one of the most important objectives of the tangible remote dismantling simulator, as well. This paper proposes a user interface technology to reduce mental transformations for the tangible remote dismantling simulator. At the dismantling process simulation using the tangible remote dismantling simulator, the most difficult work is the remote operation handling the high degrees-of-freedom (DOF) manipulator due to complex mental transformations. The proposed user interface technology reduces mental transformations with constraints using the point projection and direction projection. The test result of the cutting process over the closure head of the RPV demonstrates that the proposed mental transformation reduction technology is operated successfully in the tangible remote dismantling simulator, and lets the operator be easy to control the high DOF manipulator even in the most difficult operation by reducing DOFs to be controlled manually.

User Interface Technology to Reduce Mental Transformations for Tangible Remote Dismantling Simulator

International Nuclear Information System (INIS)

Hyun, Dongjun; Kim, Ikjune; Lee, Jonghwan; Kim, Geun-Ho; Jeong, Kwan-Seong; Choi, Byung-Seon; Moon, Jeikwon; Choi, Jong-Won

2015-01-01

High-level radiation of the major components restricts access by human workers, and makes an accident or outage during the dismantling process more difficult to deal with. Since unexpected situations causes waste of budget and an aggravation of safety, the preliminary verification of the dismantling processes and equipment by the tangible remote dismantling simulator is very important. The design optimization of the dismantling processes and equipment is one of the most important objectives of the tangible remote dismantling simulator, as well. This paper proposes a user interface technology to reduce mental transformations for the tangible remote dismantling simulator. At the dismantling process simulation using the tangible remote dismantling simulator, the most difficult work is the remote operation handling the high degrees-of-freedom (DOF) manipulator due to complex mental transformations. The proposed user interface technology reduces mental transformations with constraints using the point projection and direction projection. The test result of the cutting process over the closure head of the RPV demonstrates that the proposed mental transformation reduction technology is operated successfully in the tangible remote dismantling simulator, and lets the operator be easy to control the high DOF manipulator even in the most difficult operation by reducing DOFs to be controlled manually

The role of utilities in enabling technology innovation: The BC hydro alternative & emerging energy strategy

Energy Technology Data Exchange (ETDEWEB)

Tu, Alex; Leclair, Donna; Morrison, Allison

2010-09-15

In order for renewable energy to play a dominant role in the global electricity supply mix, emerging renewable energy technologies - such as wave, tidal, enhanced geothermal, and 3rd generation photovoltaic technologies - must prove their technical merits and achieve cost parity with conventional sources of supply. BC Hydro, a government-owned electric utility, launched an Alternative and Emerging Energy Strategy that describes its role as an enabler of technology innovation. This paper describes BC Hydro's goal, objectives and actions to accelerate the commercialization that will yield a diversity of supply options and a growing, local clean-tech cluster.

Visible quality aluminum and nickel superpolish polishing technology enabling new missions

Science.gov (United States)

Carrigan, Keith G.

2011-06-01

It is now well understood that with US Department of Defense (DoD) budgets shrinking and the Services and Agencies demanding new systems which can be fielded more quickly, cost and schedule are being emphasized more and more. At the same time, the US has ever growing needs for advanced capabilities to support evolving Intelligence, Surveillance and Reconnaissance objectives. In response to this market demand for ever more cost-effective, faster to market, single-channel, athermal optical systems, we have developed new metal polishing technologies which allow for short-lead, low-cost metal substrates to replace more costly, longer-lead material options. In parallel, the commercial marketplace is being driven continually to release better, faster and cheaper electronics. Growth according to Moore's law, enabled by advancements in photolithography, has produced denser memory, higher resolution displays and faster processors. While the quality of these products continues to increase, their price is falling. This seeming paradox is driven by industry advancements in manufacturing technology. The next steps on this curve can be realized via polishing technology which allows low-cost metal substrates to replace costly Silicon based optics for use in ultra-short wavelength systems.

Cognitive Determinants of the Effectiveness of Technological Interfaces

Directory of Open Access Journals (Sweden)

Paweł Piotr

2016-12-01

Full Text Available Interface plays an important function in the operational process of modern interactive information technologies. Its task is to enable communication, signal exchange, and cooperation with the human mind. Technological interface is understood as the place where technology and software operating a computer must enter into interaction with the mind. The response is provided by the mind, which communicates with the machine performing the tasks imposed by the mind. The technology with its complexities can be a problem for the operator, but on the other hand, the person can also be a problem for the technology by vague and unspecified tasks transferred for execution. I would like to view various aspects of the functioning of the interface by analyzing the four modalities: perceptual modality, associated with memory and experience, with the expectations of users, and conceptual modality related to understanding of the technology by the user.

The Virtual Learning Commons: An Emerging Technology for Learning About Emerging Technologies

Science.gov (United States)

Pennington, D. D.; Del Rio, N.; Fierro, C.; Gandara, A.; Garcia, A.; Garza, J.; Giandoni, M.; Ochoa, O.; Padilla, E.; Salamah, S.

2013-12-01

The Virtual Learning Commons (VLC), funded by the National Science Foundation Office of Cyberinfrastructure CI-Team Program, is a combination of semantic, visualization, and social media tools that support knowledge sharing and innovation across research disciplines. The explosion of new scientific tools and techniques challenges the ability of researchers to be aware of emerging technologies that might benefit them. Even when aware, it can be difficult to understand enough about emerging technologies to become potential adopters or re-users. Often, emerging technologies have little documentation, especially about the context of their use. The VLC tackles this challenge by providing mechanisms for individuals and groups of researchers to collectively organize Web resources through social bookmarking, and engage each other around those collections in order to a) learn about potentially relevant technologies that are emerging; and b) get feedback from other researchers on innovative ideas and designs. Concurrently, developers of emerging technologies can learn about potential users and the issues they encounter, and they can analyze the impact of their tools on other projects. The VLC aims to support the 'fuzzy front end' of innovation, where novel ideas emerge and there is the greatest potential for impact on research design. It is during the fuzzy front end that conceptual collisions across disciplines and exposure to diverse perspectives provide opportunity for creative thinking that can lead to inventive outcomes. This presentation will discuss the innovation theories that have informed design of the VLC, and hypotheses about the flow of information in virtual settings that can enable the process of innovation. The presentation will include a brief demonstration of key capabilities within the VLC that enable learning about emerging technologies, including the technologies that are presented in this session.

An X window based graphics user interface for radiation information processing system developed with object-oriented programming technology

International Nuclear Information System (INIS)

Gao Wenhuan; Fu Changqing; Kang Kejun

1993-01-01

X Window is a network-oriented and network transparent windowing system, and now dominant in the Unix domain. The object-oriented programming technology can be used to change the extensibility of a software system remarkably. An introduction to graphics user interface is given. And how to develop a graphics user interface for radiation information processing system with object-oriented programming technology, which is based on X Window and independent of application is described briefly

Space-based Networking Technology Developments in the Interplanetary Network Directorate Information Technology Program

Science.gov (United States)

Clare, Loren; Clement, B.; Gao, J.; Hutcherson, J.; Jennings, E.

2006-01-01

Described recent development of communications protocols, services, and associated tools targeted to reduce risk, reduce cost and increase efficiency of IND infrastructure and supported mission operations. Space-based networking technologies developed were: a) Provide differentiated quality of service (QoS) that will give precedence to traffic that users have selected as having the greatest importance and/or time-criticality; b) Improve the total value of information to users through the use of QoS prioritization techniques; c) Increase operational flexibility and improve command-response turnaround; d) Enable new class of networked and collaborative science missions; e) Simplify applications interfaces to communications services; and f) Reduce risk and cost from a common object model and automated scheduling and communications protocols. Technologies are described in three general areas: communications scheduling, middleware, and protocols. Additionally developed simulation environment, which provides comprehensive, quantitative understanding of the technologies performance within overall, evolving architecture, as well as ability to refine & optimize specific components.

Enhancing a taxonomy for health information technology: an exploratory study of user input towards folksonomy.

Science.gov (United States)

Dixon, Brian E; McGowan, Julie J

2010-01-01

The U.S. Agency for Healthcare Research and Quality has created a public website to disseminate critical information regarding its health information technology initiative. The website is maintained by AHRQ's Natiomal Resource Center (NRC) for Health Information Technology. In the latest continuous quality improvement project, the NRC used the site's search logs to extract user-generated search phrases. The phrases were then compared to the site's controlled vocabulary with respect to language, grammar, and search precision. Results of the comparison demonstrate that search log data can be a cost-effective way to improve controlled vocabularies as well as information retrieval. User-entered search phrases were found to also share many similarities with folksonomy tags.

Evaluating HDR photos using Web 2.0 technology

Science.gov (United States)

Qiu, Guoping; Mei, Yujie; Duan, Jiang

2011-01-01

High dynamic range (HDR) photography is an emerging technology that has the potential to dramatically enhance the visual quality and realism of digital photos. One of the key technical challenges of HDR photography is displaying HDR photos on conventional devices through tone mapping or dynamic range compression. Although many different tone mapping techniques have been developed in recent years, evaluating tone mapping operators prove to be extremely difficult. Web2.0, social media and crowd-sourcing are emerging Internet technologies which can be harnessed to harvest the brain power of the mass to solve difficult problems in science, engineering and businesses. Paired comparison is used in the scientific study of preferences and attitudes and has been shown to be capable of obtaining an interval-scale ordering of items along a psychometric dimension such as preference or importance. In this paper, we exploit these technologies for evaluating HDR tone mapping algorithms. We have developed a Web2.0 style system that enables Internet users from anywhere to evaluate tone mapped HDR photos at any time. We adopt a simple paired comparison protocol, Internet users are presented a pair of tone mapped images and are simply asked to select the one that they think is better or click a "no difference" button. These user inputs are collected in the web server and analyzed by a rank aggregation algorithm which ranks the tone mapped photos according to the votes they received. We present experimental results which demonstrate that the emerging Internet technologies can be exploited as a new paradigm for evaluating HDR tone mapping algorithms. The advantages of this approach include the potential of collecting large user inputs under a variety of viewing environments rather than limited user participation under controlled laboratory environments thus enabling more robust and reliable quality assessment. We also present data analysis to correlate user generated qualitative

What drives Users' Website Registration?

NARCIS (Netherlands)

T. Li (Ting); P.A. Pavlou (Paul)

2013-01-01

textabstractUser registration is an important prerequisite for the success of many websites by enabling users to gain access to domain information and personalized content. It is not always desirable for users, however, because they need to disclose personal information. This paper examines what

VisPortal: Deploying grid-enabled visualization tools through a web-portal interface

Energy Technology Data Exchange (ETDEWEB)

Bethel, Wes; Siegerist, Cristina; Shalf, John; Shetty, Praveenkumar; Jankun-Kelly, T.J.; Kreylos, Oliver; Ma, Kwan-Liu

2003-06-09

The LBNL/NERSC Visportal effort explores ways to deliver advanced Remote/Distributed Visualization (RDV) capabilities through a Grid-enabled web-portal interface. The effort focuses on latency tolerant distributed visualization algorithms, GUI designs that are more appropriate for the capabilities of web interfaces, and refactoring parallel-distributed applications to work in a N-tiered component deployment strategy. Most importantly, our aim is to leverage commercially-supported technology as much as possible in order to create a deployable, supportable, and hence viable platform for delivering grid-based visualization services to collaboratory users.

CICT Computing, Information, and Communications Technology Program

Science.gov (United States)

Laufenberg, Lawrence; Tu, Eugene (Technical Monitor)

2002-01-01

The CICT Program is part of the NASA Aerospace Technology Enterprise's fundamental technology thrust to develop tools. processes, and technologies that enable new aerospace system capabilities and missions. The CICT Program's four key objectives are: Provide seamless access to NASA resources- including ground-, air-, and space-based distributed information technology resources-so that NASA scientists and engineers can more easily control missions, make new scientific discoveries, and design the next-generation space vehicles, provide high-data delivery from these assets directly to users for missions, develop goal-oriented human-centered systems, and research, develop and evaluate revolutionary technology.

Interpreting User's Choice of Technologies: A Quantitative Research on Choosing the Best Web-Based Communication Tools

Science.gov (United States)

Adebiaye, Richmond

2010-01-01

The proliferation of web-based communication tools like email clients vis-a-vis Yahoo mail, Gmail, and Hotmail have led to new innovations in web-based communication. Email users benefit greatly from this technology, but lack of security of these tools can put users at risk of loss of privacy, including identity theft, corporate espionage, and…

Emission Control Research to Enable Fuel Efficiency: Department of Energy Heavy Vehicle Technologies

International Nuclear Information System (INIS)

Gurpreet Singh; Ronald L. Graves; John M. Storey; William P. Partridge; John F. Thomas; Bernie M. Penetrante; Raymond M. Brusasco; Bernard T. Merritt; George E. Vogtlin; Christopher L. Aardahl; Craig F. Habeger; M.L. Balmer

2000-01-01

The Office of Heavy Vehicle Technologies supports research to enable high-efficiency diesel engines to meet future emissions regulations, thus clearing the way for their use in light trucks as well as continuing as the most efficient powerplant for freight-haulers. Compliance with Tier 2 rules and expected heavy duty engine standards will require effective exhaust emission controls (after-treatment) for diesels in these applications. DOE laboratories are working with industry to improve emission control technologies in projects ranging from application of new diagnostics for elucidating key mechanisms, to development and tests of prototype devices. This paper provides an overview of these R and D efforts, with examples of key findings and developments

Cohesive subgroup formation : enabling and constraining effects of social capital in strategic technology alliance networks

NARCIS (Netherlands)

Duysters, G.M.; Lemmens, C.E.A.V.

2002-01-01

In this paper we will examine the role of embeddedness and social capital in the process of cohesive subgroup formation in strategic technology alliance networks. More in particular, we will investigate the social mechanisms that enable and enforce cohesive subgroup formation. We will argue that the

Data-Base Software For Tracking Technological Developments

Science.gov (United States)

Aliberti, James A.; Wright, Simon; Monteith, Steve K.

1996-01-01

Technology Tracking System (TechTracS) computer program developed for use in storing and retrieving information on technology and related patent information developed under auspices of NASA Headquarters and NASA's field centers. Contents of data base include multiple scanned still images and quick-time movies as well as text. TechTracS includes word-processing, report-editing, chart-and-graph-editing, and search-editing subprograms. Extensive keyword searching capabilities enable rapid location of technologies, innovators, and companies. System performs routine functions automatically and serves multiple users.

Enabling Access to Medical and Health Education in Rwanda Using Mobile Technology: Needs Assessment for the Development of Mobile Medical Educator Apps.

Science.gov (United States)

Rusatira, Jean Christophe; Tomaszewski, Brian; Dusabejambo, Vincent; Ndayiragije, Vincent; Gonsalves, Snedden; Sawant, Aishwarya; Mumararungu, Angeline; Gasana, George; Amendezo, Etienne; Haake, Anne; Mutesa, Leon

2016-06-01

Lack of access to health and medical education resources for doctors in the developing world is a serious global health problem. In Rwanda, with a population of 11 million, there is only one medical school, hence a shortage in well-trained medical staff. The growth of interactive health technologies has played a role in the improvement of health care in developed countries and has offered alternative ways to offer continuous medical education while improving patient's care. However, low and middle-income countries (LMIC) like Rwanda have struggled to implement medical education technologies adapted to local settings in medical practice and continuing education. Developing a user-centered mobile computing approach for medical and health education programs has potential to bring continuous medical education to doctors in rural and urban areas of Rwanda and influence patient care outcomes. The aim of this study is to determine user requirements, currently available resources, and perspectives for potential medical education technologies in Rwanda. Information baseline and needs assessments data collection were conducted in all 44 district hospitals (DHs) throughout Rwanda. The research team collected qualitative data through interviews with 16 general practitioners working across Rwanda and 97 self-administered online questionnaires for rural areas. Data were collected and analyzed to address two key questions: (1) what are the currently available tools for the use of mobile-based technology for medical education in Rwanda, and (2) what are user's requirements for the creation of a mobile medical education technology in Rwanda? General practitioners from different hospitals highlighted that none of the available technologies avail local resources such as the Ministry of Health (MOH) clinical treatment guidelines. Considering the number of patients that doctors see in Rwanda, an average of 32 patients per day, there is need for a locally adapted mobile education app

Grid Enabled Geospatial Catalogue Web Service

Science.gov (United States)

Chen, Ai-Jun; Di, Li-Ping; Wei, Ya-Xing; Liu, Yang; Bui, Yu-Qi; Hu, Chau-Min; Mehrotra, Piyush

2004-01-01

Geospatial Catalogue Web Service is a vital service for sharing and interoperating volumes of distributed heterogeneous geospatial resources, such as data, services, applications, and their replicas over the web. Based on the Grid technology and the Open Geospatial Consortium (0GC) s Catalogue Service - Web Information Model, this paper proposes a new information model for Geospatial Catalogue Web Service, named as GCWS which can securely provides Grid-based publishing, managing and querying geospatial data and services, and the transparent access to the replica data and related services under the Grid environment. This information model integrates the information model of the Grid Replica Location Service (RLS)/Monitoring & Discovery Service (MDS) with the information model of OGC Catalogue Service (CSW), and refers to the geospatial data metadata standards from IS0 19115, FGDC and NASA EOS Core System and service metadata standards from IS0 191 19 to extend itself for expressing geospatial resources. Using GCWS, any valid geospatial user, who belongs to an authorized Virtual Organization (VO), can securely publish and manage geospatial resources, especially query on-demand data in the virtual community and get back it through the data-related services which provide functions such as subsetting, reformatting, reprojection etc. This work facilitates the geospatial resources sharing and interoperating under the Grid environment, and implements geospatial resources Grid enabled and Grid technologies geospatial enabled. It 2!so makes researcher to focus on science, 2nd not cn issues with computing ability, data locztic, processir,g and management. GCWS also is a key component for workflow-based virtual geospatial data producing.

J-GLOBAL MeSH Dictionary: Sphingomonadaceae [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Sphingomonadaceae 名詞 一般 * * * * Sphi...ngomonadaceae ... MeSH D042301 200906094653102667 C LS07 UNKNOWN_1 Sphingomonadaceae

J-GLOBAL MeSH Dictionary: Piscirickettsiaceae [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Piscirickettsiaceae 名詞 一般 * * * * Piscirickettsia...ceae ... MeSH D044147 200906033138096892 C LS07 UNKNOWN_1 Piscirickettsiaceae

J-GLOBAL MeSH Dictionary: Heligmosomatoidea [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Heligmosomatoidea 名詞 一般 * * * * Heligmos...omatoidea ... MeSH D006369 200906085224079623 C LS05 UNKNOWN_1 Heligmosomatoidea

Spreading the rooftop revolution: What policies enable solar-as-a-service?

International Nuclear Information System (INIS)

Overholm, Harald

2015-01-01

Firms using third-party-ownership (TPO) business models transform solar rooftop installations into a simple service. TPO firms sign long-term agreements with building owners or users to install, finance and manage locally sited solar panels. Customers simply buy solar electricity. The business model can increase total PV market demand by removing central barriers to PV adoption including technology risk, financing needs, and learning costs. TPO is now the dominant US model for residential solar and attempts to use the business model are underway in Europe and Asia. This study discusses how policy makers can enable emergence of solar TPO business models in new markets, a theme novel to extant literature. The paper is based on a comprehensive study of the US solar TPO ecosystem including 50 interviews with key market actors. A downside to the TPO model is potential lock-out of innovative solar technology. Crucial policy actions to enable TPO emergence in new markets are to ensure the legality of the TPO model and to facilitate solar self-consumption (the ability of customers to offset grid electricity costs by using locally generated solar electricity). -- Highlights: •Solar third-party ownership (TPO) firms can boost solar rooftop growth. •5 in-depth cases of US TPO firms and their ecosystem of partners are analyzed. •Policy options to enable solar TPO emergence in new markets are suggested. •Avoiding prohibitive rules and facilitating solar self-consumption are key measures. •Lock-out of new and innovative solar technology is a downside to the TPO model

Stratified charge rotary engine critical technology enablement. Volume 2: Appendixes

Science.gov (United States)

Irion, C. E.; Mount, R. E.

1992-01-01

This second volume of appendixes is a companion to Volume 1 of this report which summarizes results of a critical technology enablement effort with the stratified charge rotary engine (SCRE) focusing on a power section of 0.67 liters (40 cu. in.) per rotor in single and two rotor versions. The work is a continuation of prior NASA Contracts NAS3-23056 and NAS3-24628. Technical objectives are multi-fuel capability, including civil and military jet fuel and DF-2, fuel efficiency of 0.355 Lbs/BHP-Hr. at best cruise condition above 50 percent power, altitude capability of up to 10Km (33,000 ft.) cruise, 2000 hour TBO and reduced coolant heat rejection. Critical technologies for SCRE's that have the potential for competitive performance and cost in a representative light-aircraft environment were examined. Objectives were: the development and utilization of advanced analytical tools, i.e. higher speed and enhanced three dimensional combustion modeling; identification of critical technologies; development of improved instrumentation; and to isolate and quantitatively identify the contribution to performance and efficiency of critical components or subsystems. A family of four-stage third-order explicit Runge-Kutta schemes is derived that required only two locations and has desirable stability characteristics. Error control is achieved by embedding a second-order scheme within the four-stage procedure. Certain schemes are identified that are as efficient and accurate as conventional embedded schemes of comparable order and require fewer storage locations.

Mapping industrial systems - a supply network perspective on enabling technologies, processes and actors

OpenAIRE

Srai, Jagjit Singh

2016-01-01

This is the author accepted manuscript. The final version is available from InderScience Publishers via http://dx.doi.org/10.1504/IJMTM.2017.10002927 This paper develops a multi-layered multi-stage mapping approach to explore the characteristics of emerging industry supply networks (EI SNs), and how enabling production technologies and supply chain processes are supported by institutional, industrial and supply network actors. The mapping methodology involves the systematic capture of mate...

PEAC: A Power-Efficient Adaptive Computing Technology for Enabling Swarm of Small Spacecraft and Deployable Mini-Payloads

Data.gov (United States)

National Aeronautics and Space Administration — This task is to develop and demonstrate a path-to-flight and power-adaptive avionics technology PEAC (Power Efficient Adaptive Computing). PEAC will enable emerging...

China, the United States, and competition for resources that enable emerging technologies

Science.gov (United States)

Gulley, Andrew L.; Nassar, Nedal T.; Xun, Sean

2018-01-01

Historically, resource conflicts have often centered on fuel minerals (particularly oil). Future resource conflicts may, however, focus more on competition for nonfuel minerals that enable emerging technologies. Whether it is rhenium in jet engines, indium in flat panel displays, or gallium in smart phones, obscure elements empower smarter, smaller, and faster technologies, and nations seek stable supplies of these and other nonfuel minerals for their industries. No nation has all of the resources it needs domestically. International trade may lead to international competition for these resources if supplies are deemed at risk or insufficient to satisfy growing demand, especially for minerals used in technologies important to economic development and national security. Here, we compare the net import reliance of China and the United States to inform mineral resource competition and foreign supply risk. Our analysis indicates that China relies on imports for over half of its consumption for 19 of 42 nonfuel minerals, compared with 24 for the United States—11 of which are common to both. It is for these 11 nonfuel minerals that competition between the United States and China may become the most contentious, especially for those with highly concentrated production that prove irreplaceable in pivotal emerging technologies.

A Study on Persuasive Technologies: The Relationship between User Emotions, Trust and Persuasion

Directory of Open Access Journals (Sweden)

Wan Nooraishya Wan Ahmad

2018-06-01

Full Text Available A successful persuasive technology is able to persuade people to change from one state to a more well known state. Therefore, to allow for a change, persuasive technology must be able to affect users’ emotion and make the user trust the technology so that they will adopt the persuasive technology into their daily life routine, as well as continue to use the technology for long period. This paper is aimed to study the relation between users’ emotion with trust and persuasion and how they may contribute to the success of changing a person attitude or behavior towards a certain context or issue. Twenty five participants have completed the study in 6 weeks by using two types of persuasive technology that were assessed at three different interaction stages: pre, during and post. Result shows that emotions have a significant effect on trust, whereas the effect of emotions on persuasion using the persuasive technology was mediated by trust.

A Review of Systems and Technologies for Smart Homes and Smart Grids

Directory of Open Access Journals (Sweden)

Gabriele Lobaccaro

2016-05-01

Full Text Available In the actual era of smart homes and smart grids, advanced technological systems that allow the automation of domestic tasks are developing rapidly. There are numerous technologies and applications that can be installed in smart homes today. They enable communication between home appliances and users, and enhance home appliances’ automation, monitoring and remote control capabilities. This review article, by introducing the concept of the smart home and the advent of the smart grid, investigates technologies for smart homes. The technical descriptions of the systems are presented and point out advantages and disadvantages of each technology and product today available on the market. Barriers, challenges, benefits and future trends regarding the technologies and the role of users have also been discussed.

A User-Centric Knowledge Creation Model in a Web of Object-Enabled Internet of Things Environment

Science.gov (United States)

Kibria, Muhammad Golam; Fattah, Sheik Mohammad Mostakim; Jeong, Kwanghyeon; Chong, Ilyoung; Jeong, Youn-Kwae

2015-01-01

User-centric service features in a Web of Object-enabled Internet of Things environment can be provided by using a semantic ontology that classifies and integrates objects on the World Wide Web as well as shares and merges context-aware information and accumulated knowledge. The semantic ontology is applied on a Web of Object platform to virtualize the real world physical devices and information to form virtual objects that represent the features and capabilities of devices in the virtual world. Detailed information and functionalities of multiple virtual objects are combined with service rules to form composite virtual objects that offer context-aware knowledge-based services, where context awareness plays an important role in enabling automatic modification of the system to reconfigure the services based on the context. Converting the raw data into meaningful information and connecting the information to form the knowledge and storing and reusing the objects in the knowledge base can both be expressed by semantic ontology. In this paper, a knowledge creation model that synchronizes a service logistic model and a virtual world knowledge model on a Web of Object platform has been proposed. To realize the context-aware knowledge-based service creation and execution, a conceptual semantic ontology model has been developed and a prototype has been implemented for a use case scenario of emergency service. PMID:26393609

A User-Centric Knowledge Creation Model in a Web of Object-Enabled Internet of Things Environment

Directory of Open Access Journals (Sweden)

Muhammad Golam Kibria

2015-09-01

Full Text Available User-centric service features in a Web of Object-enabled Internet of Things environment can be provided by using a semantic ontology that classifies and integrates objects on the World Wide Web as well as shares and merges context-aware information and accumulated knowledge. The semantic ontology is applied on a Web of Object platform to virtualize the real world physical devices and information to form virtual objects that represent the features and capabilities of devices in the virtual world. Detailed information and functionalities of multiple virtual objects are combined with service rules to form composite virtual objects that offer context-aware knowledge-based services, where context awareness plays an important role in enabling automatic modification of the system to reconfigure the services based on the context. Converting the raw data into meaningful information and connecting the information to form the knowledge and storing and reusing the objects in the knowledge base can both be expressed by semantic ontology. In this paper, a knowledge creation model that synchronizes a service logistic model and a virtual world knowledge model on a Web of Object platform has been proposed. To realize the context-aware knowledge-based service creation and execution, a conceptual semantic ontology model has been developed and a prototype has been implemented for a use case scenario of emergency service.

A User-Centric Knowledge Creation Model in a Web of Object-Enabled Internet of Things Environment.

Science.gov (United States)

Kibria, Muhammad Golam; Fattah, Sheik Mohammad Mostakim; Jeong, Kwanghyeon; Chong, Ilyoung; Jeong, Youn-Kwae

2015-09-18

User-centric service features in a Web of Object-enabled Internet of Things environment can be provided by using a semantic ontology that classifies and integrates objects on the World Wide Web as well as shares and merges context-aware information and accumulated knowledge. The semantic ontology is applied on a Web of Object platform to virtualize the real world physical devices and information to form virtual objects that represent the features and capabilities of devices in the virtual world. Detailed information and functionalities of multiple virtual objects are combined with service rules to form composite virtual objects that offer context-aware knowledge-based services, where context awareness plays an important role in enabling automatic modification of the system to reconfigure the services based on the context. Converting the raw data into meaningful information and connecting the information to form the knowledge and storing and reusing the objects in the knowledge base can both be expressed by semantic ontology. In this paper, a knowledge creation model that synchronizes a service logistic model and a virtual world knowledge model on a Web of Object platform has been proposed. To realize the context-aware knowledge-based service creation and execution, a conceptual semantic ontology model has been developed and a prototype has been implemented for a use case scenario of emergency service.

Utilizing Smart Textiles-Enabled Sensorized Toy and Playful Interactions for Assessment of Psychomotor Development on Children

Directory of Open Access Journals (Sweden)

Mario Vega-Barbas

2015-01-01

Full Text Available Emerging pervasive technologies like smart textiles make it possible to develop new and more accessible healthcare services for patients independently of their location or time. However, none of these new e-health solutions guarantee a complete user acceptance, especially in cases requiring extensive interaction between the user and the solution. So far, researchers have focused their efforts on new interactions techniques to improve the perception of privacy and confidence of the people using e-health services. In this way, the use of smart everyday objects arises as an interesting approach to facilitate the required interaction and increase user acceptance. Such Smart Daily Objects together with smart textiles provide researchers with a novel way to introduce sophisticated sensor technology in the daily life of people. This work presents a sensorized smart toy for assessment of psychomotor development in early childhood. The aim of this work is to design, develop, and evaluate the usability and playfulness of a smart textile-enabled sensorized toy that facilitates the user engagement in a personalized monitoring healthcare activity. To achieve this objective the monitoring is based on a smart textile sensorized toy as catalyzer of acceptance and multimodal sensing sources to monitor psychomotor development activities during playtime.

The Usability Evaluation of Fakih Method Based on Technology for Students with Hearing Difficulties: The User's Retrospective

Science.gov (United States)

Sabdan, Muhammad Sayuti Bin; Alias, Norlidah; Jomhari, Nazean; Jamaludin, Khairul Azhar; DeWitt, Dorothy

2014-01-01

The study is aimed at evaluating the FAKIH method based on technology in teaching al-Quran, based on the user's retrospective. The participants of this study were five students selected based on hearing difficulties. The study employed the user evaluation framework. Teacher's journals were used to determine the frequency and percentage of…

Graphical user interfaces and visually disabled users

NARCIS (Netherlands)

Poll, L.H.D.; Waterham, R.P.

1995-01-01

From February 1992 until the end of 1993, the authors ((IPO) Institute for Perception Research) participated in a European ((TIDE) Technology Initiative for Disabled and Elderly) project which addressed the problem arising for visually disabled computer-users from the growing use of Graphical User

Designing Users : The Social Construction of Users in Product Design

OpenAIRE

Kadanoff, David Bradley

2014-01-01

The technological systems in our society are widespread and structured in complex ways. To comprehend the construction of these systems, it is necessary to understand who has opportunities to influence them and how. Previous scholarship in the sociology of technology has provided some analysis of the roles of designers and users in constructing technology. However, this research tends to oversimplify the nature of design work and portrays designers and users in isolation, having little- to-no...

DHIAP Phase I Technology Demonstration Report: Prototype for Remote Authentication Dail-In User Service (RADIUS)

National Research Council Canada - National Science Library

Crane, Lynn

2000-01-01

... a region, is a system that meets the Remote Authentication Dial-In User Service (RADIUS) standard. This report describes the development and trials of the technology and provides an analysis of alternative.

J-GLOBAL MeSH Dictionary: Phoradendron属 [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Phoradendron属 名詞 サ変接続 * * * * Phoradendron...属 ... MeSH D028184 200906006893995689 C LS06 UNKNOWN_2 Phoradendron 属

Distributed Observer Network (DON), Version 3.0, User's Guide

Science.gov (United States)

Mazzone, Rebecca A.; Conroy, Michael P.

2015-01-01

The Distributed Observer Network (DON) is a data presentation tool developed by the National Aeronautics and Space Administration (NASA) to distribute and publish simulation results. Leveraging the display capabilities inherent in modern gaming technology, DON places users in a fully navigable 3-D environment containing graphical models and allows the users to observe how those models evolve and interact over time in a given scenario. Each scenario is driven with data that has been generated by authoritative NASA simulation tools and exported in accordance with a published data interface specification. This decoupling of the data from the source tool enables DON to faithfully display a simulator's results and ensure that every simulation stakeholder will view the exact same information every time.

Efficient technologies or user behaviour, which is the more important when reducing households' energy consumption?

Energy Technology Data Exchange (ETDEWEB)

Gram-Hanssen, K. [Danish Building Research Institute, Aalborg University, A.C. Meyers Vaenge 15, 2450 Copenhagen (Denmark)

2013-08-15

Much policy effort focuses on energy efficiency of technology, though not only efficiency but also user behaviour is an important factor influencing the amount of consumed energy. This paper explores to what extent energy efficiency of appliances and houses or user behaviour is the more important, both for understanding why some households consume much more energy than others, and when looking for relevant approaches to a future low-carbon society. The paper uses several sources to explore this question, most of them from a Danish context, including results from the researcher's own projects and Danish national statistics. These Danish data are discussed together with international studies. Through the presentation of these different projects and examples, it is shown how user behaviour is at least as important as the efficiency of technology when explaining households' energy consumption in Denmark. In the conclusion, these results are discussed in a broader international perspective and it is concluded that more research in this field is necessary. In relation to energy policy, it is argued that it is not a question of technology efficiency or behaviour, as both have to be included in future policy if energy demand is actually to be reduced. Furthermore, it is also argued that not only individual behaviour is relevant, but also a broader perspective on collectively shared low-carbon practices has to be promoted.

Technology assessment of multileaf collimation: a North American users survey

International Nuclear Information System (INIS)

Klein, Eric E.; Tepper, Joel; Sontag, Mark; Franklin, Michael; Ling, Clifton; Kubo, Dale

1999-01-01

Purpose: The American Association of Physicists in Medicine (AAPM) initiated an Assessment of Technology Subcommittee (ATS) to help the radiotherapy community evaluate emerging technologies. The ATS decided to first address multileaf collimation (MLC) by means of a North American users survey. The survey attempted to address issues such as MLC utility, efficacy, cost-effectiveness, and customer satisfaction. Methods and Materials: The survey was designed with 38 questions, with cross-tabulation set up to decipher a particular clinic's perception of MLC. The surveys were coded according to MLC types, which were narrowed to four: Elekta, Siemens, Varian 52-leaf, and Varian 80-leaf. A 40% return rate was desired. Results: A 44% (108 of 250) return was achieved. On an MLC machine, 76.5% of photon patients are being treated with MLC. The main reasons for not using MLC were stair stepping, field size limitation, and physician objection. The most common sites in which MLC is being used are lung, pelvis, and prostate. The least used sites are head and neck and mantle fields. Of the facilities, 31% claimed an increase in number of patients being treated since MLC was installed, and 44% claimed an increase in the number of fields. Though the staffing for block cutting has decreased, therapist staffing has not. However, 91% of the facilities claimed a decreased workload for the therapists, despite the increase in daily treated patients and fields. Of the facilities that justified MLC purchase for more daily patients, 63% are actually treating more patients. Only 26% of the facilities that justified an MLC purchase for intensity-modulated radiotherapy (IMRT) are currently using it for that purpose. The satisfaction rating (1 = low to 5 = high) for department groups averaged 4.0. Therapists ranked MLC as 4.6. Conclusions: Our survey shows that most users have successfully introduced MLC into the clinic as a block replacement. Most have found MLC to be cost-effective and

Impact of Information and Communication Technology on Information Seeking Behavior of Users in Astronomy and Astrophysics Centers of India: A Survey

Science.gov (United States)

Sahu, H. K.; Singh, S. N.

2010-10-01

This study is based on a survey designed to determine the Information Seeking Behavior (ISB) of Astronomy and Astrophysics users in India. The main objective of the study is to determine the sources consulted and the general pattern of the information-gathering system of users and the impact of Information and Communication Technology (ICT) on the Astronomy and Astrophysics user's Information Seeking Behavior. It examines various Information and Communication Technology-based resources and methods of access and use. A descriptive sample stratified method has been used and data was collected using a questionnaire as the main tool. The response rate was 72%. Descriptive statistics were also employed and data have been presented in tables and graphs. The study is supported by earlier studies. It shows that Astronomy and Astrophysics users have developed a unique Information Seeking Behavior to carry out their education and research. The vast majority of respondents reported that more information is available from a variety of e-resources. Consequently, they are able to devote more time to seek out relevant information in the current Information and Communication Technology scenario. The study also indicates that respondents use a variety of information resources including e-resources for teaching and research. Books and online databases such as the NASA Astrophysics Data System (ADS) were considered more important as formal sources of information. E-mail and face-to-face communications are used extensively by users as informal sources of information. It also reveals that despite the presence of electronic sources, Astronomy and Astrophysics users are still using printed materials. This study should to help to improve various Information and Communication Technology-based services. It also suggests that GOI should adopt Information and Communication Technology-based Information Centers and Libraries services and recommends a network-based model for Astronomy and

User Acceptance of Social Learning Systems in Higher Education: An Application of the Extended Technology Acceptance Model

Science.gov (United States)

Akman, Ibrahim; Turhan, Cigdem

2017-01-01

This study aims to explore the users' behaviour and acceptance of social media for learning in higher educational institutions with the help of the extended Technology Acceptance Model (TAM). TAM has been extended to investigate how ethical and security awareness of users affect the actual usage of social learning applications. For this purpose, a…

User Management with LDAP(Light weight Directory Access Protocolfor access to technology and Information Services in Companies

Directory of Open Access Journals (Sweden)

José Teodoro Mejía Viteri

2016-08-01

Full Text Available This research aims to conduct an analysis of management services information and users with LDAP (Lightweight / Simplified Directory Access Protocol, their interaction with other technology services company, allowing it to be accessed through a single user and password. This study allowed us to collect information through a literature review on the LDAP service and its ability to interact with your user directory Open source technology services; also with Windows Server and Active Directory service is used by companies for their ease of management and access resources on Windows clients; is intended to provide an alternative for the implementation of each of the services required by public and private companies with tools free use and access to services for management and administration can be done by integrating or synchronizing with the directory LDAP.

Application of new technologies in the virtual library: Seminars in Turkey, Portugal, and Spain

Science.gov (United States)

Hunter, Judy F.; Cotter, Gladys A.

1994-01-01

This paper focuses on the technologies that are available today to support the concept of a virtual library. The concept of a 'virtual library' or a 'library without walls' is meant to convey the idea that information in any format should be available to the end-user from the desktop as if it were located on the local workstation. Discussed here are the background, trends, technology enablers, end-user requirements, and the NASA Access Mechanism (NAM) system, one example of how it is possible to apply existing technologies to the client server architecture to logically centralize geographically distributed applications and information.

Understanding social acceptability of arsenic-safe technologies in rural Bangladesh: A user-oriented analysis

NARCIS (Netherlands)

Kundu, D.K.; Gupta, A.; Mol, A.P.J.; Nasreen, M.

2016-01-01

Contamination of shallow tube well drinking water by naturally occurring arsenic is a severe societal and human health challenge in Bangladesh. Multiple technological interventions seeking to ameliorate the problem face hurdles in securing social acceptance, i.e. a willingness of users to receive

Enabling Technologies for Silicon Microstrip Tracking Detectors at the HL-LHC

CERN Document Server

Barth, C; Bloch, I.; Bögelspacher, F.; de Boer, W.; Daniels, M.; Dierlamm, A.; Eber, R.; Eckerlin, G.; Eckstein, D.; Eichhorn, T.; Erfle, J.; Feld, L.; Garutti, E.; Gregor, I. -M.; Guthoff, M.; Hartmann, F.; Hauser, M.; Husemann, U.; Jakobs, K.; Junkes, A.; Karpinski, W.; Klein, K.; Kuehn, S.; Lacker, H.; Mahboubi, K.; Müller, Th.; Mussgiller, A.; Nürnberg, A.; Parzefall, U.; Poehlsen, T.; Poley, L.; Preuten, M.; Rehnisch, L.; Sammet, J.; Schleper, P.; Schuwalow, S.; Sperlich, D.; Stanitzki, M.; Steinbrück, G.; Wlochal, M.

2016-01-01

While the tracking detectors of the ATLAS and CMS experiments have shown excellent performance in Run 1 of LHC data taking, and are expected to continue to do so during LHC operation at design luminosity, both experiments will have to exchange their tracking systems when the LHC is upgraded to the high-luminosity LHC (HL-LHC) around the year 2024. The new tracking systems need to operate in an environment in which both the hit densities and the radiation damage will be about an order of magnitude higher than today. In addition, the new trackers need to contribute to the first level trigger in order to maintain a high data-taking efficiency for the interesting processes. Novel detector technologies have to be developed to meet these very challenging goals. The German groups active in the upgrades of the ATLAS and CMS tracking systems have formed a collaborative "Project on Enabling Technologies for Silicon Microstrip Tracking Detectors at the HL-LHC" (PETTL), which was supported by the Helmholtz Alliance "Phys...

Solar sorptive cooling. Technologies, user requirements, practical experience, future prospects

Energy Technology Data Exchange (ETDEWEB)

Treffinger, P. [DLR Deutsches Zentrum fuer Luft- und Raumfahrt e.V., Hardthausen (Germany); Hertlein, H.P. [eds.] [Forschungsverbund Sonnenenergie, Koeln (Germany)

1998-09-01

Sorptive cooling techniques permit the use of low-temperature solar heat, i.e. a renewable energy of low cost and world-wide availability. The Forschungsverbund Sonnenenergie intends to develop solar sorptive cooling technologies to the prototype stage and, in cooperation with the solar industry and its end users, to promote practical application in air conditioning of buildings and cold storage of food. The workshop presents an outline of the state of development of solar sorptive cooling from the view of users and developers. Exemplary solar cooling systems are described, and the potential of open and closed sorptive processes is assessed. Future central activities will be defined in an intensive discussion between planners, producers, users and developers. [German] Der Einsatz von Sorptionstechniken zur Kaelteerzeugung erlaubt es, als treibende Solarenergie Niedertemperatur-Solarwaerme einzusetzen, also eine regenerative Energie mit sehr geringen Kosten und weltweiter Verfuegbarkeit. Der Forschungsverbund Sonnenenergie hat sich als Aufgabe gestellt, die Techniken der solaren Sorptionskuehlung bis zum Prototyp zu entwickeln und mit Industrie und Nutzern die praktische Anwendung voranzubringen. Die Anwendungsfelder sind die Klimatisierung von Gebaeuden und die Kaltlagerung von Lebensmitteln. Der Workshop gibt einen Ueberblick zum Entwicklungsstand der solaren Sorptionskuehlung aus der Sicht der Anwender und Entwickler. Bereits ausgefuehrte Beispiele zur solaren Kuehlung werden vorgestellt und das Potential geschlossener und offener Sorptionsverfahren angegeben. In intensiver Diskussion zwischen Planern, Herstellern, Nutzern und Entwicklern sollen kuenftige Arbeitsschwerpunkte herausgearbeitet werden. (orig.)

JST Thesaurus Headwords and Synonyms: Threskiornithidae [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Threskiornithidae 名詞 一般 * * * * ト...キ科 トキカ トキカ Thesaurus2015 200906034071654875 C LS05 UNKNOWN_1 Threskiornithidae

Technology Acceptance and User Experience: A Review of the Experiential Component in HCI

DEFF Research Database (Denmark)

Hornbæk, Kasper; Hertzum, Morten

2017-01-01

Understanding the mechanisms that shape the adoption and use of information technology is central to human-computer interaction. Two accounts are particularly vocal about these mechanisms, namely the technology acceptance model (TAM) and work on user experience (UX) models. In this study we review...... 37 papers in the overlap between TAM and UX models to explore the experiential component of human-computer interactions. The models provide rich insights about what constructs influence the experiential component of human-computer interactions and about how these constructs are related. For example...

Social Networks as Enablers of Enterprise Creativity: Evidence from Portuguese Firms and Users

OpenAIRE

Fernandes, Silvia; Belo, Ana

2016-01-01

The present work analyzes the profiles of social networks' users, individuais and enterprises in Algarve (Portugal), having accomplished online questionnaires. Samples of 230 users and 70 firms were collected. According to data obtained there are different behaviors. Users' results highlight the need of harnessing the potential of recruitment and business projects through social networks, as searching for knowledge, communication and professional relations are expressive. Firms' results revea...

Design and Implementation of Technology Enabled Affective Learning Using Fusion of Bio-Physical and Facial Expression

Science.gov (United States)

Ray, Arindam; Chakrabarti, Amlan

2016-01-01

Technology Enabled Learning is a cognitive, constructive, systematic, collaborative learning procedure, which transforms teaching-learning pedagogy where role of emotion is very often neglected. Emotion plays significant role in the cognitive process of human being, so the transformation is incomplete without capturing the learner's emotional…

Evaluating the influence of perceived organizational learning capability on user acceptance of information technology among operating room nurse staff.

Science.gov (United States)

Lee, Chien-Ching; Lin, Shih-Pin; Yang, Shu-Ling; Tsou, Mei-Yung; Chang, Kuang-Yi

2013-03-01

Medical institutions are eager to introduce new information technology to improve patient safety and clinical efficiency. However, the acceptance of new information technology by medical personnel plays a key role in its adoption and application. This study aims to investigate whether perceived organizational learning capability (OLC) is associated with user acceptance of information technology among operating room nurse staff. Nurse anesthetists and operating room nurses were recruited in this questionnaire survey. A pilot study was performed to ensure the reliability and validity of the translated questionnaire, which consisted of 14 items from the four dimensions of OLC, and 16 items from the four constructs of user acceptance of information technology, including performance expectancy, effort expectancy, social influence, and behavioral intention. Confirmatory factor analysis was applied in the main survey to evaluate the construct validity of the questionnaire. Structural equation modeling was used to test the hypothetical relationships between the four dimensions of user acceptance of information technology and the second-ordered OLC. Goodness of fit of the hypothetic model was also assessed. Performance expectancy, effort expectancy, and social influence positively influenced behavioral intention of users of the clinical information system (all p < 0.001) and accounted for 75% of its variation. The second-ordered OLC was positively associated with performance expectancy, effort expectancy, and social influence (all p < 0.001). However, the hypothetic relationship between perceived OLC and behavioral intention was not significant (p = 0.87). The fit statistical analysis indicated reasonable model fit to data (root mean square error of approximation = 0.07 and comparative fit index = 0.91). Perceived OLC indirectly affects user behavioral intention through the mediation of performance expectancy, effort expectancy, and social influence in the operating room

Understanding access and use of technology among youth with first-episode psychosis to inform the development of technology-enabled therapeutic interventions.

Science.gov (United States)

Abdel-Baki, Amal; Lal, Shalini; D-Charron, Olivier; Stip, Emmanuel; Kara, Nadjia

2017-02-01

Computers, video games and technological devices are part of young people's everyday lives. However, their use in first-episode psychosis (FEP) treatment is rare. The purpose of this study was to better understand the access and use of technology among individuals with FEP, including gaming activities, to inform future development of technology-enabled therapeutic applications. Self-administered survey on use of technological tools in 71 FEP individuals. PCs/laptops were used by all participants; cellphones/smartphones by 92%, consoles by 83% (mainly male and younger participants). Women texted and used social networks more frequently; men played games (mainly action) more often. The younger individuals reported playing games frequently (32% daily) with less use of the Web and social networks (favourite: Facebook). These data will be useful for developing Web-based psychoeducation tools and cognitive remediation video games for youth with FEP. © 2015 Wiley Publishing Asia Pty Ltd.

Nuclear Energy Enabling Technologies (NEET) Reactor Materials: News for the Reactor Materials Crosscut, May 2016

Energy Technology Data Exchange (ETDEWEB)

Maloy, Stuart Andrew [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Materials Science in Radiation and Dynamics Extremes

2016-09-26

In this newsletter for Nuclear Energy Enabling Technologies (NEET) Reactor Materials, pages 1-3 cover highlights from the DOE-NE (Nuclear Energy) programs, pages 4-6 cover determining the stress-strain response of ion-irradiated metallic materials via spherical nanoindentation, and pages 7-8 cover theoretical approaches to understanding long-term materials behavior in light water reactors.

JST Thesaurus Headwords and Synonyms: Tenthredinidae [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Tenthredinidae 名詞 一般 * * * * ハバチ科 ハバチカ ハバチカ Thesaurus2015 200906042473054354 C LS05 UNKNOWN_1 Tenthredinidae

JST Thesaurus Headwords and Synonyms: Gelechiidae [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Gelechiidae 名詞 一般 * * * * キバガ科 キバガカ キバガカ Thesaurus2015 200906066756644618 C LS05 UNKNOWN_1 Gelechiidae

Towards reference architectures as an enabler for software ecosystems

DEFF Research Database (Denmark)

Knodel, Jens; Manikas, Konstantinos

2016-01-01

Software ecosystems - a topic with increasingly growing interest in academia and industry in the past decade - arguably revolutionized many aspects of industrial software engineering (business models, architectures, platforms, project executions, collaboration models, distribution of assets......, to name a few). Software ecosystems enable the contribution of external actors with distinct center a common technology and the potential distribution of the actor contributions to an existing user set. Reference architectures have been proven successful and beneficial for software product lines...... and traditional software development within distinct domains. They arguably come with a set of benefits that severely counterweights the additional effort of design and implementation. But what is the role of reference architectures in an ecosystem setting? In this position paper, we argue for the use...

Power User Interface

Science.gov (United States)

Pfister, Robin; McMahon, Joe

2006-01-01

Power User Interface 5.0 (PUI) is a system of middleware, written for expert users in the Earth-science community, PUI enables expedited ordering of data granules on the basis of specific granule-identifying information that the users already know or can assemble. PUI also enables expert users to perform quick searches for orderablegranule information for use in preparing orders. PUI 5.0 is available in two versions (note: PUI 6.0 has command-line mode only): a Web-based application program and a UNIX command-line- mode client program. Both versions include modules that perform data-granule-ordering functions in conjunction with external systems. The Web-based version works with Earth Observing System Clearing House (ECHO) metadata catalog and order-entry services and with an open-source order-service broker server component, called the Mercury Shopping Cart, that is provided separately by Oak Ridge National Laboratory through the Department of Energy. The command-line version works with the ECHO metadata and order-entry process service. Both versions of PUI ultimately use ECHO to process an order to be sent to a data provider. Ordered data are provided through means outside the PUI software system.

Nikkaji Dictionary: (+)-ケタミン [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term (+)-ケタミン 名詞 一般 * * * * (+)-ケタミン ... Nikkaji J343.931C 200906055071390379 C CA06 UNKNOWN_2 ( + )- ケタ ミン

J-GLOBAL MeSH Dictionary: Corynebacterium pseudotuberculosis [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Corynebacterium pseudotuberculosis... 名詞 一般 * * * * Corynebacterium pseudotuberculosis ... MeSH D016925 200906025325177003 C LS07 UNKNOWN_2 Corynebacterium pseudotuberculosis

J-GLOBAL MeSH Dictionary: Yersinia pseudotuberculosis [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Yersinia pseudotuberculosis 名詞 一般... * * * * Yersinia pseudotuberculosis ... MeSH D015011 200906011755952514 C LS07 UNKNOWN_2 Yersinia pseudotuberculosis

J-GLOBAL MeSH Dictionary: Sulfolobus solfataricus [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Sulfolobus solfataricus 名詞 一般 * * * * Sulfolobus solfataricus ... MeSH D048229 200906045592943760 C LS07 UNKNOWN_2 Sulfolobus solfataricus

J-GLOBAL MeSH Dictionary: Neorickettsia risticii [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Neorickettsia risticii 名詞 一般 * * * * Neorickettsia... risticii ... MeSH D041103 200906043905068374 C LS07 UNKNOWN_2 Neorickettsia risticii

J-GLOBAL MeSH Dictionary: Neorickettsia sennetsu [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Neorickettsia sennetsu 名詞 一般 * * * * Neorickettsia... sennetsu ... MeSH D041101 200906077083053908 C LS07 UNKNOWN_2 Neorickettsia sennetsu

J-GLOBAL MeSH Dictionary: Campylobacter upsaliensis [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Campylobacter upsaliensis 名詞 一般 *... * * * Campylobacter upsaliensis ... MeSH D044885 200906036434053162 C LS07 UNKNOWN_2 Campylobacter upsaliensis

J-GLOBAL MeSH Dictionary: Actinobacillus pleuropneumoniae [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Actinobacillus pleuropneumoniae 名...詞 一般 * * * * Actinobacillus pleuropneumoniae ... MeSH D016977 200906089064706214 C LS07 UNKNOWN_2 Actinobacillus pleuropneumoniae

J-GLOBAL MeSH Dictionary: Tetrahymena pyriformis [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Tetrahymena pyriformis 名詞 一般 * * * * Tetrahymena... pyriformis ... MeSH D013769 200906097287118996 C LS07 UNKNOWN_2 Tetrahymena pyriformis

J-GLOBAL MeSH Dictionary: Tetrahymena thermophila [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Tetrahymena thermophila 名詞 一般 * * * * Tetrahymena... thermophila ... MeSH D016808 200906086486381246 C LS07 UNKNOWN_2 Tetrahymena thermophila

JST Thesaurus Headwords and Synonyms: Triticum [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Triticum 名詞 一般 * * * * コムギ属 コムギゾク コムギゾク Thesaurus2015 200906055861156856 C LS06 UNKNOWN_1 Triticum

JST Thesaurus Headwords and Synonyms: Hibiscus [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Hibiscus 名詞 一般 * * * * フヨウ属 フヨウゾク フヨーゾク Thesaurus2015 200906098519206796 C LS06 UNKNOWN_1 Hibiscus

Nikkaji Dictionary: Dewarベンゼン [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Dewarベンゼン 名詞 一般 * * * * Dewarベンゼン ... Nikkaji J55.588F 200906090628967488 C CA06 UNKNOWN_2 Dewar ベンゼン

JST Thesaurus Headwords and Synonyms: Phellodendron [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Phellodendron 名詞 一般 * * * * キハダ属 キハダゾク キハダゾク Thesaurus2015 200906094869403491 C LS06 UNKNOWN_1 Phellodendron

JST Thesaurus Headwords and Synonyms: Rhododendron [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Rhododendron 名詞 一般 * * * * ツツジ属 ツツジゾク ツツジゾク Thesaurus2015 200906011353058086 C LS06 UNKNOWN_1 Rhododendron

Nikkaji Dictionary: Troeger's塩基 [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Troeger's塩基 名詞 一般 * * * * Troeger's塩基 ... Nikkaji J821.202C 200906088694501851 C CA06 UNKNOWN_2 Troeger ' s 塩基

Blending technological, cognitive and social enablers to develop an immersive virtual learning environment for construction engineering education

NARCIS (Netherlands)

Keenaghan, G.N.

2018-01-01

The conceptual framework of the proposed novel system was to provide a stimulating learning experience for dislocated digital learners, who are seen as individuals with different perceptions and expectations. In addition to functionally integrate technological, cognitive and social enablers, the

Establishment and Operation of User Facilities

International Nuclear Information System (INIS)

Cho, Yong Sub; Kwon, Hyeok Jung; Kim, Kye Ryung

2008-05-01

PEFP(Proton Engineering Frontier Project) has launched on a new enterprise to develop the technologies for the future relating to the proton beam and spin-off technologies in 2002. PEFP planned to supply 20MeV and 100MeV proton beam by the development of the 100MeV, 20mA linear accelerator during ten years from 2002 to 2012. The final goal of this project is establishment of 20MeV and 100MeV user facilities. To do this, we must develop the key technologies for establishing user facilities. Before the main facilities are normally operated, we have established the test user facilities to support various kinds of users' basic experiments and pilot studies. The necessity of this research are as follows; - Domestic achievement of key technologies for the development and design of the user facilities for the several tens to hundreds MeV class high current proton beam - Beam application researches can be revitalized and improved the efficiency by the establishment and operation of user facilities and test facilities. - Ion implantation facilities have contributed to increase Industrial applications - It is more effective in saving money that users use the PEFP's user facility than other country's user facilities. - It is possible to contribute to the local society and commercialize the beam application technologies by the establishment of PEFP's research branch in Kyungju

Microarray Я US: a user-friendly graphical interface to Bioconductor tools that enables accurate microarray data analysis and expedites comprehensive functional analysis of microarray results.

Science.gov (United States)

Dai, Yilin; Guo, Ling; Li, Meng; Chen, Yi-Bu

2012-06-08

Microarray data analysis presents a significant challenge to researchers who are unable to use the powerful Bioconductor and its numerous tools due to their lack of knowledge of R language. Among the few existing software programs that offer a graphic user interface to Bioconductor packages, none have implemented a comprehensive strategy to address the accuracy and reliability issue of microarray data analysis due to the well known probe design problems associated with many widely used microarray chips. There is also a lack of tools that would expedite the functional analysis of microarray results. We present Microarray Я US, an R-based graphical user interface that implements over a dozen popular Bioconductor packages to offer researchers a streamlined workflow for routine differential microarray expression data analysis without the need to learn R language. In order to enable a more accurate analysis and interpretation of microarray data, we incorporated the latest custom probe re-definition and re-annotation for Affymetrix and Illumina chips. A versatile microarray results output utility tool was also implemented for easy and fast generation of input files for over 20 of the most widely used functional analysis software programs. Coupled with a well-designed user interface, Microarray Я US leverages cutting edge Bioconductor packages for researchers with no knowledge in R language. It also enables a more reliable and accurate microarray data analysis and expedites downstream functional analysis of microarray results.

J-GLOBAL MeSH Dictionary: Dirofilaria immitis [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Dirofilaria immitis 名詞 一般 * * * * Dirofilaria immit...is ... MeSH D004183 200906050138784430 C LS05 UNKNOWN_2 Dirofilaria immitis

J-GLOBAL MeSH Dictionary: Actinobacillus actinomycetemcomitans [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Actinobacillus actinomycetemcomit...ans 名詞 一般 * * * * Actinobacillus actinomycetemcomitans ... MeSH D016976 200906016161948020 C LS07 UNKNOWN_2 Actinobacillus actinomycetemcomitans

J-GLOBAL MeSH Dictionary: Streptococcus mitis [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Streptococcus mitis 名詞 一般 * * * * Streptococcus mit...is ... MeSH D034361 200906051281920120 C LS07 UNKNOWN_2 Streptococcus mitis

J-GLOBAL MeSH Dictionary: Ralstonia solanacearum [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Ralstonia solanacearum 名詞 一般 * * * * Ralstonia sol...anacearum ... MeSH D043368 200906091329391991 C LS07 UNKNOWN_2 Ralstonia solanacearum

J-GLOBAL MeSH Dictionary: Thiocapsa roseopersicina [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Thiocapsa roseopersicina 名詞 一般 * * * * Thiocapsa rose...opersicina ... MeSH D020616 200906079314739029 C LS07 UNKNOWN_2 Thiocapsa roseopersicina

J-GLOBAL MeSH Dictionary: Edwardsiella tarda [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Edwardsiella tarda 名詞 一般 * * * * Edwar...dsiella tarda ... MeSH D020609 200906083854859187 C LS07 UNKNOWN_2 Edwardsiella tarda

J-GLOBAL MeSH Dictionary: Edwardsiella ictaluri [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Edwardsiella ictaluri 名詞 一般 * * * * Edwar...dsiella ictaluri ... MeSH D020610 200906051921978774 C LS07 UNKNOWN_2 Edwardsiella ictaluri

J-GLOBAL MeSH Dictionary: Morganella morganii [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Morganella morganii 名詞 一般 * * * * Morganella morg...anii ... MeSH D020613 200906053401612729 C LS07 UNKNOWN_2 Morganella morganii

J-GLOBAL MeSH Dictionary: Aeromonas salmonicida [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Aeromonas salmonicida 名詞 一般 * * * * Aeromonas salmon...icida ... MeSH D048409 200906081596351600 C LS07 UNKNOWN_2 Aeromonas salmonicida

J-GLOBAL MeSH Dictionary: Aliivibrio salmonicida [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Aliivibrio salmonicida 名詞 一般 * * * * Aliivibrio salmon...icida ... MeSH D044165 200906023365578059 C LS07 UNKNOWN_2 Aliivibrio salmonicida

J-GLOBAL MeSH Dictionary: Brucella melitensis [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Brucella melitensis 名詞 一般 * * * * Brucella melitens...is ... MeSH D017347 200906028294406644 C LS07 UNKNOWN_2 Brucella melitensis

J-GLOBAL MeSH Dictionary: Mycoplasma ovipneumoniae [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Mycoplasma ovipneumoniae 名詞 一般 * * * * Mycoplasma ovipneum...oniae ... MeSH D045802 200906092922912910 C LS07 UNKNOWN_2 Mycoplasma ovipneumoniae

J-GLOBAL MeSH Dictionary: Chlamydophila pneumoniae [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Chlamydophila pneumoniae 名詞 一般 * * * * Chlamydophila pneum...oniae ... MeSH D016993 200906005356438556 C LS07 UNKNOWN_2 Chlamydophila pneumoniae

J-GLOBAL MeSH Dictionary: Mycoplasma pneumoniae [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Mycoplasma pneumoniae 名詞 一般 * * * * Mycoplasma pneumonia...e ... MeSH D009177 200906010320106380 C LS07 UNKNOWN_2 Mycoplasma pneumoniae

J-GLOBAL MeSH Dictionary: Mycoplasma hyopneumoniae [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Mycoplasma hyopneumoniae 名詞 一般 * * * * Mycoplasma hyopneum...oniae ... MeSH D045705 200906033834508852 C LS07 UNKNOWN_2 Mycoplasma hyopneumoniae

J-GLOBAL MeSH Dictionary: Prevotella melaninogenica [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Prevotella melaninogenica 名詞 一般 * * * * Prevotella mela...ninogenica ... MeSH D001443 200906099099181179 C LS07 UNKNOWN_2 Prevotella melaninogenica

J-GLOBAL MeSH Dictionary: Bacillus stearothermophilus [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Bacillus stearothermophilus 名詞 一般 * * * * Bacillus stea...rothermophilus ... MeSH D001411 200906079736943583 C LS07 UNKNOWN_2 Bacillus stearothermophilus

Current status and future prospects for enabling chemistry technology in the drug discovery process.

Science.gov (United States)

Djuric, Stevan W; Hutchins, Charles W; Talaty, Nari N

2016-01-01

This review covers recent advances in the implementation of enabling chemistry technologies into the drug discovery process. Areas covered include parallel synthesis chemistry, high-throughput experimentation, automated synthesis and purification methods, flow chemistry methodology including photochemistry, electrochemistry, and the handling of "dangerous" reagents. Also featured are advances in the "computer-assisted drug design" area and the expanding application of novel mass spectrometry-based techniques to a wide range of drug discovery activities.

Bidirectional User Throughput Maximization Based on Feedback Reduction in LiFi Networks

OpenAIRE

Soltani, Mohammad Dehghani; Wu, Xiping; Safari, Majid; Haas, Harald

2017-01-01

Channel adaptive signalling, which is based on feedback, can result in almost any performance metric enhancement. Unlike the radio frequency (RF) channel, the optical wireless communications (OWCs) channel is fairly static. This feature enables a potential improvement of the bidirectional user throughput by reducing the amount of feedback. Light-Fidelity (LiFi) is a subset of OWCs, and it is a bidirectional, high-speed and fully networked wireless communication technology where visible light ...

Comparative Study of 4G Technology, Applications and Compatibility in Prevailing Networks

OpenAIRE

Ishan Shah; Shiv Shukla; Rohan Shrotriya; Nupur Mehta; Nirja Mehta; Shivang Bakliwal

2012-01-01

With increasing end user demands for wider service due to the rapid growth and variety of IT (information technology) industry, the service with the data rate of 30 Mbps cannot accommodate the future mobile multimedia environment. The Continuous improvement in semiconductors and computing technologies has encouraged service providers to consider implementing the 4G-enabled services to the customers. This paper describes the applications of 4G technology considering the importance of switching...

Post LANDSAT D Advanced Concept Evaluation (PLACE). [with emphasis on mission planning, technological forecasting, and user requirements

Science.gov (United States)

1977-01-01

An outline is given of the mission objectives and requirements, system elements, system concepts, technology requirements and forecasting, and priority analysis for LANDSAT D. User requirements and mission analysis and technological forecasting are emphasized. Mission areas considered include agriculture, range management, forestry, geology, land use, water resources, environmental quality, and disaster assessment.

JST Thesaurus Headwords and Synonyms: Phragmites australis [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Phragmites australis 名詞 一般 * * * ...* ヨシ ヨシ ヨシ Thesaurus2015 200906077254295905 C LS06 UNKNOWN_2 Phragmites australis

JST Thesaurus Headwords and Synonyms: Phragmites communis [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Phragmites communis 名詞 一般 * * * *... ヨシ ヨシ ヨシ Thesaurus2015 200906077254295905 C LS06 UNKNOWN_2 Phragmites communis

J-GLOBAL MeSH Dictionary: Mermithoidea上科 [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Mermithoidea上科 名詞 一般 * * * * Mermit...hoidea上科 ... MeSH D008632 200906023857238237 C LS05 UNKNOWN_2 Mermithoidea 上 科

J-GLOBAL MeSH Dictionary: von Willebrand病 [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term von Willebrand病 名詞 一般 * * * * von Willebrand...病 ... MeSH D014842 200906053707829497 C LS51 UNKNOWN_2 von Willebrand 病

From the Islands of Knowledge to a Shared Understanding: Interdisciplinarity and Technology Literacy for Innovation in Smart Electronic Product Design

Science.gov (United States)

Blanco, Teresa; Casas, Roberto; Manchado-Pérez, Eduardo; Asensio, Ángel; López-Pérez, Jose M.

2017-01-01

In the context of the evolving Internet, a balance between technological advances and meaning change is crucial to develop innovative and breakthrough "connected electronics" that enable the Internet of Things. Designers and technologists are key enablers of this process respectively, ensuring adequate users' needs and technology…

Enabling Routes of Road Network Constrained Movements as Mobile Service Context

DEFF Research Database (Denmark)

Jensen, Christian Søndergaard

2007-01-01

With the continuing advances in wireless communications, geo-positioning, and portable electronics, an infrastructure is emerging that enables the delivery of on-line, location-enabled services to very large numbers of mobile users. A typical usage situation for mobile services is one characteriz...... vehicles traveling within a real road network are reported...... by a small screen and no keyboard, and by the service being only a secondary focus of the user. Under such circumstances, it is particularly important to deliver the "right" information and service at the right time, with as little user interaction as possible. This may be achieved by making services context...

Enhancing User Customization through Novel Software Architecture for Utility Scale Solar Siting Software

Energy Technology Data Exchange (ETDEWEB)

Brant Peery; Sam Alessi; Randy Lee; Leng Vang; Scott Brown; David Solan; Dan Ames

2014-06-01

There is a need for a spatial decision support application that allows users to create customized metrics for comparing proposed locations of a new solar installation. This document discusses how PVMapper was designed to overcome the customization problem through the development of loosely coupled spatial and decision components in a JavaScript plugin architecture. This allows the user to easily add functionality and data to the system. The paper also explains how PVMapper provides the user with a dynamic and customizable decision tool that enables them to visually modify the formulas that are used in the decision algorithms that convert data to comparable metrics. The technologies that make up the presentation and calculation software stack are outlined. This document also explains the architecture that allows the tool to grow through custom plugins created by the software users. Some discussion is given on the difficulties encountered while designing the system.

JST Thesaurus Headwords and Synonyms: Piper [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Piper 名詞 一般 * * * * コショウ属 コショウゾク コショーゾク Thesaurus2015 200906052994671517 C LS06 UNKNOWN_1 Piper

JST Thesaurus Headwords and Synonyms: TOC [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term TOC 名詞 一般 * * * * ＴＯＣ【炭素】 ＴＯＣ ティーオーシー Thesaurus2015 200906028998811684 C AC29 UNKNOWN_1 TOC

JST Thesaurus Headwords and Synonyms: Glossina [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Glossina 名詞 一般 * * * * ツェツェバエ ツェツェバエ ツェツェバエ Thesaurus2015 200906046393952985 C LS05 UNKNOWN_1 Glossina

JST Thesaurus Headwords and Synonyms: Lyme病 [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Lyme病 名詞 一般 * * * * ライム病 ライムビョウ ライムビョー Thesaurus2015 200906092018596316 C LS51 UNKNOWN_2 Lyme 病

JST Thesaurus Headwords and Synonyms: Secale [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Secale 名詞 一般 * * * * ライムギ属 ライムギゾク ライムギゾク Thesaurus2015 200906053529242894 C LS06 UNKNOWN_1 Secale

JST Thesaurus Headwords and Synonyms: Sorghum [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Sorghum 名詞 一般 * * * * モロコシ属 モロコシゾク モロコシゾク Thesaurus2015 200906021863132103 C LS06 UNKNOWN_1 Sorghum

JST Thesaurus Headwords and Synonyms: SPICE [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term SPICE 名詞 一般 * * * * 香辛料 コウシンリョウ コーシンリョー Thesaurus2015 200906038818853584 C LS72 UNKNOWN_1 SPICE

JST Thesaurus Headwords and Synonyms: Pholiota [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Pholiota 名詞 一般 * * * * スギタケ属 スギタケゾク スギタケゾク Thesaurus2015 200906066403251140 C LS07 UNKNOWN_1 Pholiota

JST Thesaurus Headwords and Synonyms: Bufonidae [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Bufonidae 名詞 一般 * * * * ヒキガエル科 ヒキガエルカ ヒキガエルカ Thesaurus2015 200906060477716147 C LS05 UNKNOWN_1 Bufonidae

JST Thesaurus Headwords and Synonyms: Diporeia [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Diporeia 名詞 一般 * * * * 端脚類 タンキャクルイ タンキャクルイ Thesaurus2015 200906068339317712 C LS05 UNKNOWN_1 Diporeia

JST Thesaurus Headwords and Synonyms: Nepovirus [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Nepovirus 名詞 一般 * * * * ネポウイルス ネポウイルス ネポーイルス Thesaurus2015 200906006576794570 C LS07 UNKNOWN_1 Nepovirus

JST Thesaurus Headwords and Synonyms: Potyvirus [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Potyvirus 名詞 一般 * * * * ポチウイルス ポチウイルス ポチウイルス Thesaurus2015 200906013467309480 C LS07 UNKNOWN_1 Potyvirus

JST Thesaurus Headwords and Synonyms: Comovirus [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Comovirus 名詞 一般 * * * * コモウイルス コモウイルス コモーイルス Thesaurus2015 200906083294414125 C LS07 UNKNOWN_1 Comovirus

JST Thesaurus Headwords and Synonyms: Rhodomelaceae [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Rhodomelaceae 名詞 一般 * * * * フジマツモ...科 フジマツモカ フジマツモカ Thesaurus2015 200906010206623464 C LS06 UNKNOWN_1 Rhodomelaceae

Semantic Web Technologies for the Adaptive Web

DEFF Research Database (Denmark)

Dolog, Peter; Nejdl, Wolfgang

2007-01-01

Ontologies and reasoning are the key terms brought into focus by the semantic web community. Formal representation of ontologies in a common data model on the web can be taken as a foundation for adaptive web technologies as well. This chapter describes how ontologies shared on the semantic web...... provide conceptualization for the links which are a main vehicle to access information on the web. The subject domain ontologies serve as constraints for generating only those links which are relevant for the domain a user is currently interested in. Furthermore, user model ontologies provide additional...... means for deciding which links to show, annotate, hide, generate, and reorder. The semantic web technologies provide means to formalize the domain ontologies and metadata created from them. The formalization enables reasoning for personalization decisions. This chapter describes which components...

The future of drug discovery: enabling technologies for enhancing lead characterization and profiling therapeutic potential.

Science.gov (United States)

Janero, David R

2014-08-01

Technology often serves as a handmaiden and catalyst of invention. The discovery of safe, effective medications depends critically upon experimental approaches capable of providing high-impact information on the biological effects of drug candidates early in the discovery pipeline. This information can enable reliable lead identification, pharmacological compound differentiation and successful translation of research output into clinically useful therapeutics. The shallow preclinical profiling of candidate compounds promulgates a minimalistic understanding of their biological effects and undermines the level of value creation necessary for finding quality leads worth moving forward within the development pipeline with efficiency and prognostic reliability sufficient to help remediate the current pharma-industry productivity drought. Three specific technologies discussed herein, in addition to experimental areas intimately associated with contemporary drug discovery, appear to hold particular promise for strengthening the preclinical valuation of drug candidates by deepening lead characterization. These are: i) hydrogen-deuterium exchange mass spectrometry for characterizing structural and ligand-interaction dynamics of disease-relevant proteins; ii) activity-based chemoproteomics for profiling the functional diversity of mammalian proteomes; and iii) nuclease-mediated precision gene editing for developing more translatable cellular and in vivo models of human diseases. When applied in an informed manner congruent with the clinical understanding of disease processes, technologies such as these that span levels of biological organization can serve as valuable enablers of drug discovery and potentially contribute to reducing the current, unacceptably high rates of compound clinical failure.

A Quantitative Examination of User Experience as an Antecedent to Student Perception in Technology Acceptance Modeling

Science.gov (United States)

Butler, Rory

2013-01-01

Internet-enabled mobile devices have increased the accessibility of learning content for students. Given the ubiquitous nature of mobile computing technology, a thorough understanding of the acceptance factors that impact a learner's intention to use mobile technology as an augment to their studies is warranted. Student acceptance of mobile…

Current status and future prospects for enabling chemistry technology in the drug discovery process

Science.gov (United States)

Djuric, Stevan W.; Hutchins, Charles W.; Talaty, Nari N.

2016-01-01

This review covers recent advances in the implementation of enabling chemistry technologies into the drug discovery process. Areas covered include parallel synthesis chemistry, high-throughput experimentation, automated synthesis and purification methods, flow chemistry methodology including photochemistry, electrochemistry, and the handling of “dangerous” reagents. Also featured are advances in the “computer-assisted drug design” area and the expanding application of novel mass spectrometry-based techniques to a wide range of drug discovery activities. PMID:27781094

JST Thesaurus Headwords and Synonyms: Dioscorea [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Dioscorea 名詞 一般 * * * * ヤマノイモ属 ヤマノイモゾク ヤマノイモゾク Thesaurus2015 200906086875099262 C LS06 UNKNOWN_1 Dioscorea

JST Thesaurus Headwords and Synonyms: Lamb波 [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Lamb波 名詞 一般 * * * * Ｌａｍｂ波 Ｌａｍｂハ エルエイエムビーハ Thesaurus2015 200906066191602592 C PA04 UNKNOWN_2 Lamb 波

JST Thesaurus Headwords and Synonyms: Rickettsia [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Rickettsia 名詞 一般 * * * * リケッチア属 リケッチアゾク リケッチアゾク Thesaurus2015 200906036464977172 C LS07 UNKNOWN_1 Rickettsia

JST Thesaurus Headwords and Synonyms: Actinomycetales [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Actinomycetales 名詞 一般 * * * * 放線菌...目 ホウセンキンモク ホーセンキンモク Thesaurus2015 200906062452009368 C LS07 UNKNOWN_1 Actinomycetales

JST Thesaurus Headwords and Synonyms: Juniperus [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Juniperus 名詞 一般 * * * * ビャクシン属 ビャクシンゾク ビャクシンゾク Thesaurus2015 200906015282514781 C LS06 UNKNOWN_1 Juniperus

JST Thesaurus Headwords and Synonyms: EDI [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term EDI 名詞 一般 * * * * ＥＤＩ【情報交換】 ＥＤＩ イーディーアイ Thesaurus2015 200906091295492920 C EG01 UNKNOWN_1 EDI

JST Thesaurus Headwords and Synonyms: HCC [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term HCC 名詞 一般 * * * * 肝細胞癌 カンサイボウガン カンサイボーガン Thesaurus2015 200906030566328014 C LS51 UNKNOWN_1 HCC

Effectiveness of Using a Change Management Approach to Convey the Benefits of an Information Security Implementation to Technology Users

Science.gov (United States)

Bennett, Jeannine B.

2012-01-01

This study addressed the problems associated with users' understanding, accepting, and complying with requirements of security-oriented solutions. The goal of the research was not to dispute existing theory on IT project implementations, but rather to further the knowledge on the topic of technology user acceptance of security-oriented IT…

JST Thesaurus Headwords and Synonyms: Hibiscus cannabinus [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Hibiscus cannabinus 名詞 一般 * * * *... ケナフ ケナフ ケナフ Thesaurus2015 200906017528823668 C LS06 UNKNOWN_2 Hibiscus cannabinus

JST Thesaurus Headwords and Synonyms: Crassostrea gigas [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Crassostrea gigas 名詞 一般 * * * * マ...ガキ マガキ マガキ Thesaurus2015 200906057106354047 C LS05 UNKNOWN_2 Crassostrea gigas

Building a global federation system for climate change research: the earth system grid center for enabling technologies (ESG-CET)

International Nuclear Information System (INIS)

Ananthakrishnan, R; Bernholdt, D E; Bharathi, S; Brown, D; Chen, M; Chervenak, A L; Cinquini, L; Drach, R; Foster, I T; Fox, P; Fraser, D; Halliday, K; Hankin, S; Jones, P; Kesselman, C; Middleton, D E; Schwidder, J; Schweitzer, R; Schuler, R; Shoshani, A; Siebenlist, F; Sim, A; Strand, W G; Wilhelmi, N; Su, M; Williams, D N

2007-01-01

The recent release of the Intergovernmental Panel on Climate Change (IPCC) 4th Assessment Report (AR4) has generated significant media attention. Much has been said about the US role in this report, which included significant support from the Department of Energy through the Scientific Discovery through Advanced Computing (SciDAC) and other Department of Energy (DOE) programs for climate model development and the production execution of simulations. The SciDAC-supported Earth System Grid Center for Enabling Technologies (ESG-CET) also played a major role in the IPCC AR4: all of the simulation data that went into the report was made available to climate scientists worldwide exclusively via the ESG-CET At the same time as the IPCC AR4 database was being developed, the National Center for Atmospheric Research (NCAR), a leading US climate science laboratory and a ESG participant, began publishing model runs from the Community Climate System Model (CCSM), and its predecessor the Parallel Coupled Model (PCM) through ESG In aggregate, ESG-CET provides seamless access to over 180 terabytes of distributed climate simulation data to over 6,000 registered users worldwide, who have taken delivery of more than 250 terabytes from the archive. Not only does this represent a substantial advance in scientific knowledge, it is also a major step forward in how we conduct the research process on a global scale. Moving forward, the next IPCC assessment report, AR5, will demand multi-site metadata federation for data discovery and cross-domain identity management for single sign-on of users in a more diverse federation enterprise environment. Towards this aim, ESG is leading the effort in the climate community towards standardization of material for the global federation of metadata, security, and data services required to standardize, analyze, and access data worldwide

Analysis and visualization of disease courses in a semantically-enabled cancer registry.

Science.gov (United States)

Esteban-Gil, Angel; Fernández-Breis, Jesualdo Tomás; Boeker, Martin

2017-09-29

Regional and epidemiological cancer registries are important for cancer research and the quality management of cancer treatment. Many technological solutions are available to collect and analyse data for cancer registries nowadays. However, the lack of a well-defined common semantic model is a problem when user-defined analyses and data linking to external resources are required. The objectives of this study are: (1) design of a semantic model for local cancer registries; (2) development of a semantically-enabled cancer registry based on this model; and (3) semantic exploitation of the cancer registry for analysing and visualising disease courses. Our proposal is based on our previous results and experience working with semantic technologies. Data stored in a cancer registry database were transformed into RDF employing a process driven by OWL ontologies. The semantic representation of the data was then processed to extract semantic patient profiles, which were exploited by means of SPARQL queries to identify groups of similar patients and to analyse the disease timelines of patients. Based on the requirements analysis, we have produced a draft of an ontology that models the semantics of a local cancer registry in a pragmatic extensible way. We have implemented a Semantic Web platform that allows transforming and storing data from cancer registries in RDF. This platform also permits users to formulate incremental user-defined queries through a graphical user interface. The query results can be displayed in several customisable ways. The complex disease timelines of individual patients can be clearly represented. Different events, e.g. different therapies and disease courses, are presented according to their temporal and causal relations. The presented platform is an example of the parallel development of ontologies and applications that take advantage of semantic web technologies in the medical field. The semantic structure of the representation renders it easy to

Piezoelectric Lead Zirconium Titanate Composite Touch Sensors for Integration with Flexible OLED Technology

NARCIS (Netherlands)

Deutz, D.B.; Tempelman, E.; Zwaag, S. van der; Groen, W.A.

2015-01-01

To enable the design of more intuitive product user interfaces, the prospects of matching piezoelectric touch sensors with flexible organic light emitting diode (OLED) technology are investigated. Low stiffness piezoelectric composite sensors, combining piezoelectric Pb(Zr,Ti)O3 powder with a

Unlocking the potential of smart grid technologies with behavioral science

Directory of Open Access Journals (Sweden)

Nicole eSintov

2015-04-01

Full Text Available Smart grid systems aim to provide a more stable and adaptable electricity infrastructure, and to maximize energy efficiency. Grid-linked technologies vary widely in form and function, but generally share common potentials: to reduce energy consumption via efficiency and/or curtailment, to shift use to off-peak times of day, and to enable distributed storage and generation options. Although end users are key players in these systems, they tend to be overlooked. Behavioral science is therefore key to engaging end-users and maximizing the impact of smart grid technologies. In this paper, we highlight several ways in which behavioral science can be applied to better understand and engage customers in smart grid systems.

PDA Use by Physicians: Where Do They Fit with Emerging Technologies and Use of Electronic Health Records in Office Practices?

Directory of Open Access Journals (Sweden)

Kimberly A. Galt

2012-01-01

Full Text Available This cross-sectional study explores physicians' attitudes and beliefs about the use of personal digital assistant (PDA in the context of other health information technology (HIT use and HIT-based applications safety in ambulatory care practices. The relationship of PDA use and patient safety is also explored. Ambulatory care physicians in Nebraska and South Dakota were surveyed from July to November of 2007 using a modified Dillman technique. Respondents were in one of three groups: PDA Users (those using a PDA for patient care, Other Technology Users (those not using a PDA, but using other technologies for patient care, and Non-Users (those not using any technology for patient care. PDAs are used by 43% of responding physicians, who tend to be younger and salaried. PDA Users exposed to PDAs during training continued use in practice. PDA Users believed the device enabled them to provide more efficient and better care, reduce errors, and improve patient safety.

Enabling technologies for fiber optic sensing

Science.gov (United States)

Ibrahim, Selwan K.; Farnan, Martin; Karabacak, Devrez M.; Singer, Johannes M.

2016-04-01

In order for fiber optic sensors to compete with electrical sensors, several critical parameters need to be addressed such as performance, cost, size, reliability, etc. Relying on technologies developed in different industrial sectors helps to achieve this goal in a more efficient and cost effective way. FAZ Technology has developed a tunable laser based optical interrogator based on technologies developed in the telecommunication sector and optical transducer/sensors based on components sourced from the automotive market. Combining Fiber Bragg Grating (FBG) sensing technology with the above, high speed, high precision, reliable quasi distributed optical sensing systems for temperature, pressure, acoustics, acceleration, etc. has been developed. Careful design needs to be considered to filter out any sources of measurement drifts/errors due to different effects e.g. polarization and birefringence, coating imperfections, sensor packaging etc. Also to achieve high speed and high performance optical sensing systems, combining and synchronizing multiple optical interrogators similar to what has been used with computer/processors to deliver super computing power is an attractive solution. This path can be achieved by using photonic integrated circuit (PIC) technology which opens the doors to scaling up and delivering powerful optical sensing systems in an efficient and cost effective way.

User acquaintance with mobile interfaces.

Science.gov (United States)

Ehrler, Frederic; Walesa, Magali; Sarrey, Evelyne; Wipfli, Rolf; Lovis, Christian

2013-01-01

Handheld technology finds slowly its place in the healthcare world. Some clinicians already use intensively dedicated mobile applications to consult clinical references. However, handheld technology hasn't still broadly embraced to the core of the healthcare business, the hospitals. The weak penetration of handheld technology in the hospitals can be partly explained by the caution of stakeholders that must be convinced about the efficiency of these tools before going forward. In a domain where temporal constraints are increasingly strong, caregivers cannot loose time on playing with gadgets. All users are not comfortable with tactile manipulations and the lack of dedicated peripheral complicates entering data for novices. Stakeholders must be convinced that caregivers will be able to master handheld devices. In this paper, we make the assumption that the proper design of an interface may influence users' performances to record information. We are also interested to find out whether users increase their efficiency when using handheld tools repeatedly. To answer these questions, we have set up a field study to compare users' performances on three different user interfaces while recording vital signs. Some user interfaces were familiar to users, and others were totally innovative. Results showed that users' familiarity with smartphone influences their performances and that users improve their performances by repeating a task.

Secure Web-based Ground System User Interfaces over the Open Internet

Science.gov (United States)

Langston, James H.; Murray, Henry L.; Hunt, Gary R.

1998-01-01

A prototype has been developed which makes use of commercially available products in conjunction with the Java programming language to provide a secure user interface for command and control over the open Internet. This paper reports successful demonstration of: (1) Security over the Internet, including encryption and certification; (2) Integration of Java applets with a COTS command and control product; (3) Remote spacecraft commanding using the Internet. The Java-based Spacecraft Web Interface to Telemetry and Command Handling (Jswitch) ground system prototype provides these capabilities. This activity demonstrates the use and integration of current technologies to enable a spacecraft engineer or flight operator to monitor and control a spacecraft from a user interface communicating over the open Internet using standard World Wide Web (WWW) protocols and commercial off-the-shelf (COTS) products. The core command and control functions are provided by the COTS Epoch 2000 product. The standard WWW tools and browsers are used in conjunction with the Java programming technology. Security is provided with the current encryption and certification technology. This system prototype is a step in the direction of giving scientist and flight operators Web-based access to instrument, payload, and spacecraft data.

Enabling Equal Access to Molecular Diagnostics: What Are the Implications for Policy and Health Technology Assessment?

Science.gov (United States)

Plun-Favreau, Juliette; Immonen-Charalambous, Kaisa; Steuten, Lotte; Strootker, Anja; Rouzier, Roman; Horgan, Denis; Lawler, Mark

2016-01-01

Molecular diagnostics can offer important benefits to patients and are a key enabler of the integration of personalised medicine into health care systems. However, despite their promise, few molecular diagnostics are embedded into clinical practice (especially in Europe) and access to these technologies remains unequal across countries and sometimes even within individual countries. If research translation and the regulatory environments have proven to be more challenging than expected, reimbursement and value assessment remain the main barriers to providing patients with equal access to molecular diagnostics. Unclear or non-existent reimbursement pathways, together with the lack of clear evidence requirements, have led to significant delays in the assessment of molecular diagnostics technologies in certain countries. Additionally, the lack of dedicated diagnostics budgets and the siloed nature of resource allocation within certain health care systems have significantly delayed diagnostics commissioning. This article will consider the perspectives of different stakeholders (patients, health care payers, health care professionals, and manufacturers) on the provision of a research-enabled, patient-focused molecular diagnostics platform that supports optimal patient care. Through the discussion of specific case studies, and building on the experience from countries that have successfully integrated molecular diagnostics into clinical practice, this article will discuss the necessary evolutions in policy and health technology assessment to ensure that patients can have equal access to appropriate molecular diagnostics. © 2016 S. Karger AG, Basel.

A Review of User-Centered Design for Diabetes-Related Consumer Health Informatics Technologies

Science.gov (United States)

LeRouge, Cynthia; Wickramasinghe, Nilmini

2013-01-01

User-centered design (UCD) is well recognized as an effective human factor engineering strategy for designing ease of use in the total customer experience with products and information technology that has been applied specifically to health care information technology systems. We conducted a literature review to analyze the current research regarding the use of UCD methods and principles to support the development or evaluation of diabetes-related consumer health informatics technology (CHIT) initiatives. Findings indicate that (1) UCD activities have been applied across the technology development life cycle stages, (2) there are benefits to incorporating UCD to better inform CHIT development in this area, and (3) the degree of adoption of the UCD process is quite uneven across diabetes CHIT studies. In addition, few to no studies report on methods used across all phases of the life cycle with process detail. To address that void, the Appendix provides an illustrative case study example of UCD techniques across development stages. PMID:23911188

LANCE Usage and User Analysis: Creating a Better System that Meets User Needs

Science.gov (United States)

Davies, D.; Boller, R. A.; Schmaltz, J. E.; Murphy, K. J.; Ilavajhala, S.; Ullah, A.; Joshi, T.

2012-12-01

This paper describes known uses of NASA's Land Atmosphere Near-real time Capability for EOS (LANCE) data and imagery and summarizes findings from informal interviews with LANCE users, undertaken to better understand their needs. LANCE, the NRT component of EOSDIS, provides products from MODIS, AIRS, OMI and MLS within 3 hours of satellite observation. LANCE has in excess of 50,000 unique anonymous users per month using data and imagery for wildfire management, air quality measurements, shipping, agricultural forecasting as well as monitoring volcanic plumes, dust storms, smoke plumes and floods etc. Users can be categorized as end users or as brokers who may repackage the imagery and pass it on to their own end users. Interactions with a sample of end users found the following: users like MODIS Rapid Response imagery but do not want to be confined to pre-defined subsets; they want a broader selection of imagery and those with higher bandwidth want the capability to pull in imagery in to their own web-mapping or GIS applications. Users with lower bandwidth want the capability to define their own areas-of-interest for simple download of an image file. Users also expressed a desire to see historic as well as near-real time data, so they can compare the current situation to the recent past. Users want download capabilities to enable information to be shared quickly and easily. These and other findings are being fed back to EOSDIS developers who are creating tools and services to better meet user needs. The findings from users have been valuable in ensuring that developers are on track. The most recent offerings, available http://earthdata.nasa.gov/lance, are Worldview - a web-based client which provides capability to interactively browse full-resolution, global, near real-time satellite imagery from 50+ data products from LANCE, and the Global Imagery Browse Services (GIBS) which enables both users and brokers to pull the latest imagery in to their own web mapping

Product Line Enabled Intelligent Mobile Middleware

DEFF Research Database (Denmark)

Zhang, Weishan; Kunz, Thomas; Hansen, Klaus Marius

2007-01-01

research project called PLIMM that focuses on user-centered application scenarios. PLIMM is designed based on software product line ideas which make it possible for specialized customization and optimization for different purposes and hardware/software platforms. To enable intelligence, the middleware...... needs access to a range of context models. We model these contexts with OWL, focusing on user-centered concepts. The basic building block of PLIMM is the enhanced BDI agent where OWL context ontology logic reasoning will add indirect beliefs to the belief sets. Our approach also addresses the handling...

Unlocking the potential of smart grid technologies with behavioral science.

Science.gov (United States)

Sintov, Nicole D; Schultz, P Wesley

2015-01-01

Smart grid systems aim to provide a more stable and adaptable electricity infrastructure, and to maximize energy efficiency. Grid-linked technologies vary widely in form and function, but generally share common potentials: to reduce energy consumption via efficiency and/or curtailment, to shift use to off-peak times of day, and to enable distributed storage and generation options. Although end users are central players in these systems, they are sometimes not central considerations in technology or program design, and in some cases, their motivations for participating in such systems are not fully appreciated. Behavioral science can be instrumental in engaging end-users and maximizing the impact of smart grid technologies. In this paper, we present emerging technologies made possible by a smart grid infrastructure, and for each we highlight ways in which behavioral science can be applied to enhance their impact on energy savings.

JST Thesaurus Headwords and Synonyms: TOCSY [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term TOCSY 名詞 一般 * * * * ＴＯＣＳＹ ＴＯＣＳＹ ティーオーシーエスワイ Thesaurus2015 200906069465460250 C PA09 UNKNOWN_1 TOCSY

JST Thesaurus Headwords and Synonyms: Md [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Md 名詞 一般 * * * * メンデレビウム メンデレビウム メンデレビューム Thesaurus2015 200906022783221535 C CA03 UNKNOWN_1 Md

JST Thesaurus Headwords and Synonyms: SQL [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term SQL 名詞 一般 * * * * ＳＱＬ【ソフトウェア】 ＳＱＬ エスキューエル Thesaurus2015 200906011326277027 C EG01 UNKNOWN_1 SQL

JST Thesaurus Headwords and Synonyms: Olethreutidae [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Olethreutidae 名詞 一般 * * * * ヒメハマキ...ガ科 ヒメハマキガカ ヒメハマキガカ Thesaurus2015 200906097615101931 C LS05 UNKNOWN_1 Olethreutidae

JST Thesaurus Headwords and Synonyms: DOS [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term DOS 名詞 一般 * * * * ＤＯＳ【ソフトウェア】 ＤＯＳ ディーオーエス Thesaurus2015 200906056755783260 C EG01 UNKNOWN_1 DOS

JST Thesaurus Headwords and Synonyms: Luteovirus [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Luteovirus 名詞 一般 * * * * ルテオウイルス ...ルテオウイルス ルテオーイルス Thesaurus2015 200906020714605876 C LS07 UNKNOWN_1 Luteovirus

JST Thesaurus Headwords and Synonyms: Tospovirus [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Tospovirus 名詞 一般 * * * * トスポウイルス ...トスポウイルス トスポーイルス Thesaurus2015 200906016489276984 C LS07 UNKNOWN_1 Tospovirus

JST Thesaurus Headwords and Synonyms: Carmovirus [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Carmovirus 名詞 一般 * * * * カーモウイルス ...カーモウイルス カーモーイルス Thesaurus2015 200906036474005080 C LS07 UNKNOWN_1 Carmovirus

JST Thesaurus Headwords and Synonyms: Bromovirus [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Bromovirus 名詞 一般 * * * * ブロモウイルス ...ブロモウイルス ブロモーイルス Thesaurus2015 200906099702977994 C LS07 UNKNOWN_1 Bromovirus

JST Thesaurus Headwords and Synonyms: Caulimovirus [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Caulimovirus 名詞 一般 * * * * カリモウイル...ス カリモウイルス カリモーイルス Thesaurus2015 200906019849883398 C LS07 UNKNOWN_1 Caulimovirus

JST Thesaurus Headwords and Synonyms: Tobamovirus [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Tobamovirus 名詞 一般 * * * * タバモウイルス... タバモウイルス タバモーイルス Thesaurus2015 200906022988447595 C LS07 UNKNOWN_1 Tobamovirus

JST Thesaurus Headwords and Synonyms: Cucumovirus [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Cucumovirus 名詞 一般 * * * * ククモウイルス... ククモウイルス ククモーイルス Thesaurus2015 200906087317830275 C LS07 UNKNOWN_1 Cucumovirus

JST Thesaurus Headwords and Synonyms: Psidium guajava [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Psidium guajava 名詞 一般 * * * * グアバ... グアバ グアバ Thesaurus2015 200906092188751413 C LS06/LS72 UNKNOWN_2 Psidium guajava

JST Thesaurus Headwords and Synonyms: Pholiota nameko [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Pholiota nameko 名詞 一般 * * * * ナメコ... ナメコ ナメコ Thesaurus2015 200906024797628029 C LS07/LS72 UNKNOWN_2 Pholiota nameko

Establishment and Operation of User Facilities

International Nuclear Information System (INIS)

Kim, Kye Ryung; Park, B. S.; Lim, Y. K.; Lee, S. K.; Jung, J. P.

2005-08-01

The final goal of this project is to establish the proton beam user facility which can offer the suitable proton beam for the user's demand. In the first phase we developed the key technologies that were required for the establishment of 20MeV and 100MeV proton user facilities. The user's demand survey was also achieved, and the test user facility was established on the results of the demand survey. Using the test facility, the users performed their pilot studies. Now, we have finished the conceptual design for 20MeV proton user facility. During the first phase we performed the user's demand survey and produced many materials related to the proton beam utilizations in domestic or abroad. The survey results were reflected on the establishment of the test user facility and the conceptual design of 20MeV/100MeV proton beam user facilities. We have developed the key technologies which concern to beam energy control, flux control, uniform irradiation, dose and uniformity measurement, proton energy measurement, SOBP(Spread-out Bragg Peak) system using a rotating range modulator, and carried out the conceptual design of 20MeV proton user facility. The test user facility has been constructed and operated for both verifying the developed key technologies and performing the user's preliminary experiments. 45MeV low flux user facility was constructed in 2003 and has performed a lot of irradiation experiments. The development of 1.8MeV test user facility was completed. Also the low energy user facility that KAERI kept was upgraded and used for many users. Therefore, we provided our users with various beams. On the other hand, the following activities were carried out, such as, inviting the oversea researchers, giving support to users to use the beam in domestic and abroad, discussing the beam utilization technologies by visiting the foreign user facilities, etc

The Flipped Classroom, Disruptive Pedagogies, Enabling Technologies and Wicked Problems: Responding to "The Bomb in the Basement"

Science.gov (United States)

Hutchings, Maggie; Quinney, Anne

2015-01-01

The adoption of enabling technologies by universities provides unprecedented opportunities for flipping the classroom to achieve student-centred learning. While higher education policies focus on placing students at the heart of the education process, the propensity for student identities to shift from partners in learning to consumers of…

[Translation and validation of the Quebec User Evaluation of Satisfaction with Assistive Technology (QUEST 2.0) into Portuguese].

Science.gov (United States)

de Carvalho, Karla Emanuelle Cotias; Gois Júnior, Miburge Bolívar; Sá, Katia Nunes

2014-01-01

To translate and validate the Quebec User Evaluation of Satisfaction with Assistive Technology (QUEST 2.0) into Brazilian Portuguese. Certified translators translated and back-translated Quest. Content validity (CVI) was determined by 5 experts and, after the final version of B-Quest, a pre-test was applied to users of manual wheelchairs, walkers and crutches. The psychometric properties were tested to assure the validity of items and the reliability and stability of the scale. Data were obtained from 121 users of the above-mentioned devices. Our study showed a CVI of 91.66% and a satisfactory factor analysis referent to the two-dimensional structure of the instrument that ensured the representativeness of the items. The Cron-bach's alpha of the items device, service and total score of B-Quest were 0.862, 0.717 and 0.826, respectively. Test-retest stability conducted after a time interval of 2 months was analyzed using Spearman's correlation test, which showed high correlation (ρ >0.6) for most items. The study suggests that the B-Quest is a reliable, representative, and valid instrument to measure the satisfaction of users of assistive technology in Brazil. Copyright © 2014 Elsevier Editora Ltda. All rights reserved.

JST Thesaurus Headwords and Synonyms: Arctoscopus japonicus [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Arctoscopus japonicus 名詞 一般 * * *... * ハタハタ ハタハタ ハタハタ Thesaurus2015 200906005405770421 C LS05 UNKNOWN_2 Arctoscopus japonicus

JST Thesaurus Headwords and Synonyms: Ammodytes personatus [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Ammodytes personatus 名詞 一般 * * * ...* イカナゴ イカナゴ イカナゴ Thesaurus2015 200906078742806753 C LS05 UNKNOWN_2 Ammodytes personatus

JST Thesaurus Headwords and Synonyms: Wasabia japonica [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Wasabia japonica 名詞 一般 * * * * ワサ...ビ ワサビ ワサビ Thesaurus2015 200906097830728309 C LS06/LS72 UNKNOWN_2 Wasabia japonica

JST Thesaurus Headwords and Synonyms: Sardinops melanostictus [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Sardinops melanostictus 名詞 一般 * *... * * マイワシ マイワシ マイワシ Thesaurus2015 200906029174264192 C LS05 UNKNOWN_2 Sardinops melanostictus

Self-management of hypertension using technology enabled interventions in primary care settings.

Science.gov (United States)

Chandak, Aastha; Joshi, Ashish

2015-01-01

Self-management of hypertension by controlling Blood Pressure (BP) through technology-based interventions can effectively reduce the burden of high BP, which affects one out of every three adults in the United States. The primary aim of this study is to explore the role of technology enabled interventions to improve or enhance self-management among individuals with hypertension. We conducted a systematic review of the literature published between July 2008 and June 2013 on the MEDLINE database (via PubMed interface) during July 2013. The search words were "hypertension" and "primary care" in combination with each of the terms of "technology", "internet", "computer" and "cell phone". Our inclusion criteria consisted of: (a) Randomized Controlled Trials (RCTs) (b) conducted on human subjects; (c) technology-based interventions (d) to improve self-management (e) of hypertension and if the (f) final results of the study were published in the study. Our exclusion criteria included (a) management of other conditions and (b) literature reviews. The initial search resulted in 108 results. After applying the inclusion and exclusion criteria, a total of 12 studies were analyzed. Various technologies implemented in the studies included internet-based telemonitoring and education, telephone-based telemonitoring and education, internet-based education, telemedicine via videoconferencing, telehealth kiosks and automated modem device. Some studies also involved a physician intervention, in addition to patient intervention. The outcomes of proportion of subjects with BP control and change in mean SBP and DBP were better for the group of subjects who received combined physician and patient interventions. Interventions to improve BP control for self-management of hypertension should be aimed at both physicians as well as the patients. More interventions should utilize the JNC-7 guidelines and cost-effectiveness of the intervention should also be assessed.

Eye tracking in user experience design

CERN Document Server

Romano Bergstorm, Jennifer

2014-01-01

Eye Tracking for User Experience Design explores the many applications of eye tracking to better understand how users view and interact with technology. Ten leading experts in eye tracking discuss how they have taken advantage of this new technology to understand, design, and evaluate user experience. Real-world stories are included from these experts who have used eye tracking during the design and development of products ranging from information websites to immersive games. They also explore recent advances in the technology which tracks how users interact with mobile devices, large-screen displays and video game consoles. Methods for combining eye tracking with other research techniques for a more holistic understanding of the user experience are discussed. This is an invaluable resource to those who want to learn how eye tracking can be used to better understand and design for their users. * Includes highly relevant examples and information for those who perform user research and design interactive experi...

JST Thesaurus Headwords and Synonyms: PT [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term PT 名詞 一般 * * * * 理学療法士 リガクリョウホウシ リガクリョーホウシ Thesaurus2015 200906076711637381 C LS52 UNKNOWN_1 PT

JST Thesaurus Headwords and Synonyms: XRD [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term XRD 名詞 一般 * * * * Ｘ線回折 Ｘセンカイセツ エックスセンカイセツ Thesaurus2015 200906089250080619 C PA11/PA08 UNKNOWN_1 XRD

JST Thesaurus Headwords and Synonyms: Petroselinum [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Petroselinum 名詞 一般 * * * * オランダゼリ...属 オランダゼリゾク オランダゼリゾク Thesaurus2015 200906003841666785 C LS06 UNKNOWN_1 Petroselinum

JST Thesaurus Headwords and Synonyms: Cotugno病 [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Cotugno病 名詞 一般 * * * * 坐骨神経痛 ザコツシンケイツウ ザコツシンケイツー Thesaurus2015 200906039063653675 C LS51 UNKNOWN_2 Cotugno 病

JST Thesaurus Headwords and Synonyms: Biot数 [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Biot数 名詞 一般 * * * * Ｂｉｏｔ数 Ｂｉｏｔスウ ビーアイオーティースー Thesaurus2015 200906093595053620 C PB01 UNKNOWN_2 Biot 数

JST Thesaurus Headwords and Synonyms: Clavisipitales [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Clavisipitales 名詞 一般 * * * * バッカク...キン目 バッカクキンモク バッカクキンモク Thesaurus2015 200906076428519933 C LS07 UNKNOWN_1 Clavisipitales

JST Thesaurus Headwords and Synonyms: Endomycetales [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Endomycetales 名詞 一般 * * * * エンドミケ...ス目 エンドミケスモク エンドミケスモク Thesaurus2015 200906069133337497 C LS07 UNKNOWN_1 Endomycetales

JST Thesaurus Headwords and Synonyms: Cyperus [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Cyperus 名詞 一般 * * * * カヤツリグサ属 カヤツリグサゾク カヤツリグサゾク Thesaurus2015 200906054906000899 C LS06 UNKNOWN_1 Cyperus

JST Thesaurus Headwords and Synonyms: Tombusvirus [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Tombusvirus 名詞 一般 * * * * トンブスウイル...ス トンブスウイルス トンブスーイルス Thesaurus2015 200906070637893909 C LS07 UNKNOWN_1 Tombusvirus

JST Thesaurus Headwords and Synonyms: Morbillivirus [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Morbillivirus 名詞 一般 * * * * モルビリウ...イルス モルビリウイルス モルビリウイルス Thesaurus2015 200906067225723382 C LS07 UNKNOWN_1 Morbillivirus

JST Thesaurus Headwords and Synonyms: GHG [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term GHG 名詞 一般 * * * * 温室効果ガス オンシツコウカガス オンシツコーカガス Thesaurus2015 200906034745287750 C KA01 UNKNOWN_1 GHG

JST Thesaurus Headwords and Synonyms: Meloidogyne [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Meloidogyne 名詞 一般 * * * * ネコブセンチュ...ウ ネコブセンチュウ ネコブセンチュー Thesaurus2015 200906002822195970 C LS05 UNKNOWN_1 Meloidogyne

JST Thesaurus Headwords and Synonyms: Tetrahymena [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Tetrahymena 名詞 一般 * * * * テトラヒメナ属... テトラヒメナゾク テトラヒメナゾク Thesaurus2015 200906089871776382 C LS07 UNKNOWN_1 Tetrahymena

The Health and Safety Benefits of New Technologies in Mining: A Review and Strategy for Designing and Deploying Effective User-Centred Systems

Directory of Open Access Journals (Sweden)

Tim Horberry

2012-10-01

Full Text Available Mining is currently experiencing a rapid growth in the development and uptake of automation and other new technologies (such as collision detection systems; however, they are often developed from a technology-centred perspective that does not explicitly consider the end-user. This paper first presents a review of the technologies currently available (or near-market and the likely human factors issues associated with them. The second part of the paper presents a potential long term strategy for research and development that aims to maximise the safety and health benefits for operators of such new technologies. The strategy includes a four stage research and development process, this covers: better understanding the needs for technology, user requirements and risk/cost analysis; human element design, procurement and deployment processes; evaluation and verification of the strategy; and dissemination of it to relevant stakeholders (including equipment manufacturers, mine site purchasers and regulators. The paper concludes by stressing the importance of considering the human element with respect to new mining technologies and the likely benefits of adopting the type of strategy proposed here. The overall vision is for mining to become safer and healthier through effective user-centred design and deployment of new technologies that serve both operator needs and the demands of the workplace.

Automation and hypermedia technology applications

Science.gov (United States)

Jupin, Joseph H.; Ng, Edward W.; James, Mark L.

1993-01-01

This paper represents a progress report on HyLite (Hypermedia Library technology): a research and development activity to produce a versatile system as part of NASA's technology thrusts in automation, information sciences, and communications. HyLite can be used as a system or tool to facilitate the creation and maintenance of large distributed electronic libraries. The contents of such a library may be software components, hardware parts or designs, scientific data sets or databases, configuration management information, etc. Proliferation of computer use has made the diversity and quantity of information too large for any single user to sort, process, and utilize effectively. In response to this information deluge, we have created HyLite to enable the user to process relevant information into a more efficient organization for presentation, retrieval, and readability. To accomplish this end, we have incorporated various AI techniques into the HyLite hypermedia engine to facilitate parameters and properties of the system. The proposed techniques include intelligent searching tools for the libraries, intelligent retrievals, and navigational assistance based on user histories. HyLite itself is based on an earlier project, the Encyclopedia of Software Components (ESC) which used hypermedia to facilitate and encourage software reuse.

JST Thesaurus Headwords and Synonyms: Yersinia pseudotuberculosis [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Yersinia pseudotuberculosis 名詞 一般...シーユーエルオーエスアイエス Thesaurus2015 200906011755952514 C LS07 UNKNOWN_2 Yersinia pseudotuberculosis

JST Thesaurus Headwords and Synonyms: Carica papaya [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Carica papaya 名詞 一般 * * * * パパイヤ ...パパイヤ パパイヤ Thesaurus2015 200906054153056489 C LS06/LS72 UNKNOWN_2 Carica papaya

JST Thesaurus Headwords and Synonyms: 人間学 [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term 人間学 名詞 一般 * * * * 人類学 ジンルイガク ジンルイガク Thesaurus2015 200906015889425150 V LS01 MULTI_WORD 人間 学

JST Thesaurus Headwords and Synonyms: 人類学 [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term 人類学 名詞 一般 * * * * 人類学 ジンルイガク ジンルイガク Thesaurus2015 200906015889425150 C LS01 MULTI_WORD 人類 学

Nikkaji Dictionary: (+)-バラノール [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term (+)-バラノール 名詞 一般 * * * * (+)-バラノール ... Nikkaji J757.689G 201206032178329023 C CA06 UNKNOWN_2 ( + )- バラノール

Nikkaji Dictionary: (R)-ケタミン [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term (R)-ケタミン 名詞 一般 * * * * (R)-ケタミン ... Nikkaji J238.629A 200906052675671229 C CA06 UNKNOWN_2 ( R ) - ケタ ミン