WorldWideScience

Sample records for technologies ect phase

  1. Emerging Communication Technologies (ECT) Phase 4 Report

    Science.gov (United States)

    Bastin, Gary L.; Harris, William G.; Marin, Jose A.; Nelson, Richard A.

    2005-01-01

    The Emerging Communication Technology (ECT) project investigated three First Mile communication technologies in support of NASA s Crew Exploration Vehicle (CEV), Advanced Range Technology Working Group (ARTWG), and the Advanced Spaceport Technology Working Group (ASTWG). These First Mile technologies have the purpose of interconnecting mobile users with existing Range Communication infrastructures on a 24/7 basis. ECT is a continuation of the Range Information System Management (RISM) task started in 2002. This is the fourth year of the project.

  2. Emerging Communication Technologies (ECT) Phase 3 Final Report

    Science.gov (United States)

    Bastin, Gary L.; Harris, William G.; Bates, Lakesha D.; Nelson, Richard A.

    2004-01-01

    The Emerging Communication Technology (ECT) project investigated three First Mile communication technologies in support of NASA s Second Generation Reusable Launch Vehicle (2nd Gen RLV), Orbital Space Plane, Advanced Range Technology Working Group (ARTWG) and the Advanced Spaceport Technology Working Group (ASTWG). These First Mile technologies have the purpose of interconnecting mobile users with existing Range Communication infrastructures. ECT was a continuation of the Range Information System Management (RISM) task started in 2002. RISM identified the three advance communication technologies investigated under ECT. These were Wireless Ethernet (Wi-Fi), Free Space Optics (FSO), and Ultra Wideband (UWB). Due to the report s size, it has been broken into three volumes: 1) Main Report 2) Appendices 3) UWB.

  3. Emerging Communication Technologies (ECT) Phase 2 Report. Volume 3; Ultra Wideband (UWB) Technology

    Science.gov (United States)

    Bastin, Gary L.; Harris, William G.; Chiodini, Robert; Nelson, Richard A.; Huang, PoTien; Kruhm, David A.

    2003-01-01

    The Emerging Communication Technology (ECT) project investigated three First Mile communication technologies in support of NASA s Second Generation Reusable Launch Vehicle (2nd Gen RLV), Orbital Space Plane, Advanced Range Technology Working Group (ARTWG) and the Advanced Spaceport Technology Working Group (ASTWG). These First Mile technologies have the purpose of interconnecting mobile users with existing Range Communication infrastructures. ECT was a continuation of the Range Information System Management (RISM) task started in 2002. RISM identified the three advance communication technologies investigated under ECT. These were Wireless Ethernet (Wi-Fi), Free Space Optics (FSO), and Ultra Wideband (UWB). Due to the report s size, it has been broken into three volumes: 1) Main Report 2) Appendices 3) UWB

  4. ECT

    DEFF Research Database (Denmark)

    Bouckaert, Filip; Sienaert, Pascal; Obbels, Jasmien

    2014-01-01

    BACKGROUND: Since the past 2 decades, new evidence for brain plasticity has caused a shift in both preclinical and clinical ECT research from falsifying the "brain damage hypothesis" toward exploring ECT's enabling brain (neuro)plasticity effects. METHODS: By reviewing the available animal...... and human literature, we examined the theory that seizure-induced structural changes are crucial for the therapeutic efficacy of ECT. RESULTS: Both animal and human studies suggest electroconvulsive stimulation/electroconvulsive therapy (ECT)-related neuroplasticity (neurogenesis, synaptogenesis......, angiogenesis, or gliogenesis). CONCLUSION: It remains unclear whether structural changes might explain the therapeutic efficacy and/or be related to the (transient) learning and memory impairment after ECT. Methods to assess in vivo brain plasticity of patients treated with ECT will be of particular importance...

  5. ECT and memory loss.

    Science.gov (United States)

    Squire, L R

    1977-09-01

    The author reviews several studies that clarify the nature of the memory loss associated with ECT. Bilateral ECT produced greater anterograde memory loss than right unilateral ECT and more extensive retrograde amnesia than unilateral ECT. Reactivating memories just before ECT did not produce amnesia. Capacity for new learning recovered substantially by several months after ECT, but memory complaints were common in individuals who had received bilateral ECT. Other things being equal, right unilateral ECT seems preferable to bilateral ECT because the risks to memory associated with unilateral ECT are smaller.

  6. Phase Behaviors of Reservoir Fluids with Capillary Eff ect Using Particle Swarm Optimization

    KAUST Repository

    Ma, Zhiwei

    2013-05-06

    The study of phase behavior is important for the oil and gas industry. Many approaches have been proposed and developed for phase behavior calculation. In this thesis, an alternative method is introduced to study the phase behavior by means of minimization of Helmholtz free energy. For a system at fixed volume, constant temperature and constant number of moles, the Helmholtz free energy reaches minimum at the equilibrium state. Based on this theory, a stochastic method called Particle Swarm Optimization (PSO) algorithm, is implemented to compute the phase diagrams for several pure component and mixture systems. After comparing with experimental and the classical PT-ash calculation, we found the phase diagrams obtained by minimization of the Helmholtz Free Energy approach match the experimental and theoretical diagrams very well. Capillary effect is also considered in this thesis because it has a significant influence on the phase behavior of reservoir fluids. In this part, we focus on computing the phase envelopes, which consists of bubble and dew point lines. Both fixed and calculated capillary pressure from the Young-Laplace equation cases are introduced to study their effects on phase envelopes. We found that the existence of capillary pressure will change the phase envelopes. Positive capillary pressure reduces the dew point and bubble point temperatures under the same pressure condition, while the negative capillary pressure increases the dew point and bubble point temperatures. In addition, the change of contact angle and pore radius will affect the phase envelope. The effect of the pore radius on the phase envelope is insignificant when the radius is very large. These results may become reference for future research and study. Keywords: Phase Behavior; Particle Swarm Optimization; Capillary Pressure; Reservoir Fluids; Phase Equilibrium; Phase Envelope.

  7. Single photon ECT

    International Nuclear Information System (INIS)

    Maeda, Toshio; Matsuda, Hiroshi; Tada, Akira; Bunko, Hisashi; Koizumi, Kiyoshi

    1982-01-01

    The detectability of lesions located deep in a body or overlapped with a physiologically increased activity improve with the help of single photon ECT. In some cases, the ECT is superior to the conventional gamma camera images and X-ray CT scans in the evaluation of the location and size of lesion. The single photon ECT of the brain compares favorably with the contrast enhansed X-ray CT scans. The most important adaptation of the single photon ECT are the detection of recurrent brain tumors after craniotomy and the evaluation of ischemic heart diseases. (author)

  8. Hollywood and ECT.

    Science.gov (United States)

    McDonald, Andrew; Walter, Garry

    2009-06-01

    Electroconvulsive therapy (ECT) has featured in Hollywood films for sixty years. Film depictions continue to exert a powerful and predominantly negative effect on public attitudes towards the treatment. From review of the 22 currently available films that directly refer to ECT the main themes identified are described. While initially portrayed as a dramatic but effective psychiatric intervention, ECT on film has come to stand for something quite different, representing the brutal and generally futile attempts of society to control and suppress the individual, gathering along the way a hackneyed cinematic grammar that emphasizes its inhumane and punitive nature. The film representation now has little in common with ECT as currently practised, such that filmmakers portraying ECT appear influenced more by films such as One Flew Over the Cuckoo's Nest than by evidence of the safety and effectiveness of ECT as a psychiatric treatment. Filmgoers with no personal or professional exposure to the treatment may fail to make the distinction between the demands of film narrative and clinical reality.

  9. Computerized ECT data analysis system

    International Nuclear Information System (INIS)

    Miyake, Y.; Fukui, S.; Iwahashi, Y.; Matsumoto, M.; Koyama, K.

    1988-01-01

    For the analytical method of the eddy current testing (ECT) of steam generator tubes in nuclear power plants, the authors have developed the computerized ECT data analysis system using a large-scale computer with a high-resolution color graphic display. This system can store acquired ECT data up to 15 steam generators, and ECT data can be analyzed immediately on the monitor in dialogue communication with a computer. Analyzed results of ECT data are stored and registered in the data base. This system enables an analyst to perform sorting and collecting of data under various conditions and obtain the results automatically, and also to make a plan of tube repair works. This system has completed the test run, and has been used for data analysis at the annual inspection of domestic plants. This paper describes an outline, features and examples of the computerized eddy current data analysis system for steam generator tubes in PWR nuclear power plants

  10. Does ECT alter brain structure?

    Science.gov (United States)

    Devanand, D P; Dwork, A J; Hutchinson, E R; Bolwig, T G; Sackeim, H A

    1994-07-01

    The purpose of this study was to evaluate whether ECT causes structural brain damage. The literature review covered the following areas: cognitive side effects, structural brain imaging, autopsies of patients who had received ECT, post-mortem studies of epileptic subjects, animal studies of electroconvulsive shock (ECS) and epilepsy, and the neuropathological effects of the passage of electricity, heat generation, and blood-brain barrier disruption. ECT-induced cognitive deficits are transient, although spotty memory loss may persist for events immediately surrounding the ECT course. Prospective computerized tomography and magnetic resonance imaging studies show no evidence of ECT-induced structural changes. Some early human autopsy case reports from the unmodified ECT era reported cerebrovascular lesions that were due to agonal changes or undiagnosed disease. In animal ECS studies that used a stimulus intensity and frequency comparable to human ECT, no neuronal loss was seen when appropriate control animals, blind ratings, and perfusion fixation techniques were employed. Controlled studies using quantitative cell counts have failed to show neuronal loss even after prolonged courses of ECS. Several well-controlled studies have demonstrated that neuronal loss occurs only after 1.5 to 2 hours of continuous seizure activity in primates, and adequate muscle paralysis and oxygenation further delay these changes. These conditions are not approached during ECT. Other findings indicate that the passage of electricity, thermal effects, and the transient disruption of the blood-brain barrier during ECS do not result in structural brain damage. There is no credible evidence that ECT causes structural brain damage.

  11. [Docetaxel plus carboplatin versus EC-T as adjuvant chemotherapy for triple-negative breast cancer: safety data from a phase III randomized open-label trial].

    Science.gov (United States)

    Yuan, Peng; Xu, Bing-he; Wang, Jia-yu; Ma, Fei; Li, Qing; Zhang, Pin; Fan, Ying; Li, Qiao; Wang, Wen-miao

    2012-06-01

    Triple-negative [estrogen receptor (ER)-/progesterone receptor (PR)-/HER2-] breast cancer (TNBC) accounts for ∼ 15% of overall breast cancer and associated with a poor prognosis. There is a short of standard adjuvant chemotherapy regimens for TNBC. A number of studies have shown that TNBC might be sensitive to cisplatin and carboplatin on the basis that dysfunction of BRCA1 and its pathway is associated with a specific DNA-repair defect, but data of adjuvant setting about this is limited. From January 2010 to September 2011, 95 early triple-negative breast cancer patients confirmed by pathology were randomly assigned to receive TP (docetaxel 75 mg/m², carboplatin AUC = 5, day 1, 21 days a cycle for 6 cycles) or EC-T (epirubicin 90 mg/m², cyclophosphamide 600 mg/m², d1, 21 days a cycle for 4 cycles, followed by docetaxel 80 mg/m², d1, 21 days a cycle for 4 cycles) chemotherapy. Adjuvant radiation therapy was given selectively after chemotherapy. Here we report a preliminary safety analysis with the chi-square test. Seventy-six out of the 95 patients had completed the chemotherapy and could be assessed for the safety profiles of the regimens. Thirty-seven of them were in the EC-T group with a median age of 47 years, and 21 out of these 37 patients were premenopausal (56.8%). Another 39 patients came from the TP group with a median age of 46 years, and 22 out of these 39 patients were premenopausal (56.4%). All of the 37 patients in EC-T group completed the planned treatment whereas 2 patients of the 39 cases in TP group did not because of bone marrow suppression. During the treatments, 9 patients had dose adjustment in each group. Adverse events of grade 1/2 were common. Specific incidence of adverse events with grade 3/4 in each group was as follows: alopecia, 29.7% vs. 10.3% (P = 0.033), vomiting 21.6% vs. 7.7% (P = 0.085), leukopenia 54.1% vs.25.6% (P = 0.011) and neutropenia 51.4% vs. 35.9% (P = 0.174). Other grade 3/4 toxicities were rare. All the adverse

  12. The value of emission computer tomography (ECT) for chronic abnormalities of the knee joint

    International Nuclear Information System (INIS)

    Koenig, H.; Geiger, A.; Feine, U.; Tuebingen Univ.

    1987-01-01

    Twenty-eight patients with chronic abnormalities of the knee were examined by 3-phase scintigraphy and ECT. The unobscured images produced by ECT provide additional information for evaluating the localisation, extent and activity of the lesions. The diagnosis of meniscus abnormalities in particular revealed pathognomonic patterns. The indications and value of ECT was compared with other diagnostic measures and particularly with invasive techniques (arthroscopy and arthrotomy). (orig.) [de

  13. A study of exercise ECT

    International Nuclear Information System (INIS)

    Nohara, Ryuji; Suzuki, Yukisono; Tamaki, Shunichi; Kadota, Kazunori; Kambara, Hirofumi; Kawai, Chuichi; Tamaki, Nagara; Toritsuka, Kanji

    1984-01-01

    Twenty-five patients with angina pectoris, 18 patients with post-myocardial infarction angina and 2 normal patients (mean age of 57 years, male/ female=40/5) were examined by exercise thallium-201 emission computed tomography (ECT). The results were compared to those of planar scintigraphy. A large-field-of-view gamma camera with a high resolution pallarel-hole collimator supported by gantry was rotated 180 0 around the long axis of the patient. Thirty-two different views every 5.8 0 with sampling time of 20 seconds each were obtained. Total acquisition time was 11 minutes. Data collection started from the left posterior oblique view and ended at the right anterior oblique view. Exercise was performed by graded bicycle ergometer. Post exercise ECT was compared to that of reperfusion imaging 2-3 hours after exercise. Sensitivity and specificity to detect involved coronary arteries by identifying myocardial perfusion defect were 96 and 86% ; 84 and 92% ; 81 and 100% for the right coronary artery (RCA), the left anterior descending artery (LAD) and the left circumflex artery (LCX), respectively. These data surpassed to those of planar scintigraphy (83 and 86% ; 66 and 85% ; 38 and 100% for RCA, LAD-and LCX, respectively). Especially in 3 vessel discase, ECT revealed better sensitivity (100%, 86%, 79% for RCA, LAD and LCX, respectively) than that to planar imaging (86%, 57%, 29% respectively). For 1, 2 and 0 vessel discase sensitivity and specificity of both techniques were comparable, though specificity of ECT tended to be a little better than planar's one. In conclusion, exercise ECT was very useful for detection of coronary lesions, especially in 3 vessel disease. (author)

  14. THE PRACTICE OF ECT IN INDIA : ISSUES RELATING YO THE ADMINISTRATION OF ECT

    OpenAIRE

    Agarwal, A.K.; Andrade, Chittaranjan; Reddy, M. Venkataswamy

    1992-01-01

    A questionnaire on ECT, tapping altitudes, opinions and usage, was mailed to all medical members of the Indian Psychiatric Society whose addresses were known; 263 (28.8%) responded. This paper, the first in a series that presents the results of the survey, provides demographic data on the respondents and covers issues relating to the administration of ECT. Specific issues discussed include the ECT personnel, location of the ECT facility, certain ECT prescription patterns, psychiatrist-patient...

  15. Usefulness of ECT in liver diseases

    International Nuclear Information System (INIS)

    Nishikawa, Jun-ichi

    1981-01-01

    The clinical usefulness of single photon emission tomography using rotating chair (ECT), comparing with liver scintigrams was examined with ROC (receiver operating characteristic) curve analysis. The ROC curve of ECT drew higher curved line than that of liver scintigram, i.e. true positive ratio of ECT was slightly inferior to that of liver scintigram, but false positive ratio of ECT was superior to that of liver scintigram. ECT adds useful clinical information to liver scintigram which shows questionable or suspected uptake defects. (author)

  16. Age-related cognitive effects of ECT and ECT-induced mood improvement in depressive patients

    NARCIS (Netherlands)

    bosboom, P.R.; Deijen, J.B.

    2006-01-01

    This explorative study investigated the interaction between electroconvulsive therapy (ECT) treatment-effect, reduced depression, and neuropsychological outcome in relation to age. Follow-up neuropsychological assessment was conducted with depressive patients treated with ECT. From a potential

  17. Emission computerized tomography (ECT) - an introduction

    International Nuclear Information System (INIS)

    Oberhausen, E.

    1985-01-01

    It is first shown that the qualitative requirement of ECT, with regard to both the gamme camera and the possibilities of the computer system, are much higher than those of normal planar scintigraphy. A comparison of planar scintigrams and ECT pictures demonstrates that the SPECT technique is clearly superior, especially in cases of expected superpositions by tissue activity. The factors determing the visuability of lesions in the ECT pictures are discussed. Finally a classification of scintigraphic examinations is proposed to show the applications of planar imaging and those of ECT technique. This proposal is thought to stimulate further discussions. (orig.) [de

  18. Wireless Sensor Portal Technology, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Mobitrum Corporation has demonstrated the feasibility in the Phase I of " A Wireless Sensor Portal Technology" and proposes a Phase II effort to develop a wireless...

  19. Depressive patienters oplevelse af at modtage ECT

    DEFF Research Database (Denmark)

    Jensen, Christine Damsbo

    Dette studie handler om, hvordan det opleves for den voksne depressive patient at gennemgå et ECT-behandlingsforløb (electroconvulsive therapy). Formålet med projektet er dels at undersøge, hvordan processen omkring ECT-behandlingen udspiller sig og dels at undersøge patienternes oplevelse......, reaktioner og tanker omkring ECT-behandlingen. Studiet bygger på den eksisterende viden om patienters oplevelse af ECT. Metoden er feltforskning med deltagende observation og etnografisk interview. Dette suppleres af to spørgeskemaer. Der blev inkluderet 8 patienter i undersøgelsen. Analysen udspringer af...... konstruktivistisk epistemiologisk vinkel. Ved en teoristyret analyse fremkom 2 overordnede temaer: Anspændthed og tryghed. Disse temaer blev behandlet i en procesorienteret forståelse af ECT-forløbet. Denne proces bestod af: Betingelser, interaktion og konsekvenser. Diskussionen er en kritisk diskussion af fund og...

  20. Reflected eclipses on circumbinary planets

    Directory of Open Access Journals (Sweden)

    Deeg H.J.

    2011-02-01

    Full Text Available A photometric method to detect planets orbiting around shortperiodic binary stars is presented. It is based on the detection of eclipse-signatures in the reflected light of circumbinary planets. Amplitudes of such ’reflected eclipses’ will depend on the orbital configurations of binary and planet relative to the observer. Reflected eclipses will occur with a period that is distinct from the binary eclipses, and their timing will also be modified by variations in the light-travel time of the eclipse signal. For the sample of eclipsing binaries found by the Kepler mission, reflected eclipses from close circumbinary planets may be detectable around at least several dozen binaries. A thorough detection effort of such reflected eclipses may then detect the inner planets present, or give solid limits to their abundance.

  1. Electroconvulsive Therapy (ECT) and Race: A Report of ECT Use and Sociodemographic Trends in Texas.

    Science.gov (United States)

    Williams, Julie; Chiu, Lawrence; Livingston, Robin

    2017-06-01

    Minimal research on race and other sociodemographic disparities in patients receiving electroconvulsive therapy (ECT) exists. One previously noted national trend reveals whites receiving ECT disproportionately more than other races. The aim of this study is to determine whether a county ECT program demonstrates similar disparities observed at the state and national levels. This study examined 21 years of ECT data, between 1993 and 2014, provided by the Texas Department of State Health Services, focusing on race, sex, age, and payer source and 2.5 years of the same variables from a Harris County hospital ECT program. In addition, population demographic data for Harris County and the state of Texas during the same period were obtained from the Department of State Health Services Web site. Despite an overall decrease in the population of whites countywide and statewide, whites continue to use more ECT than African Americans, Latinos, and Asians in both Harris County and Texas. However, the rates of ECT use in minorities increased overall. Both countywide and statewide, ECT was used more than twice as often in women than men. Statewide, elderly patients (>65 years old) saw decreases in ECT use, and there was an increase in private third-party payer source. Electroconvulsive therapy remains underused among African Americans, Latinos, and Asians. Hypotheses and areas for future study include cultural beliefs, stigma, patient and provider knowledge of ECT, and access to care. Despite this, the general use of ECT in Texas has increased overall, and minority use is slowly on the rise.

  2. Battery for ECT Related Cognitive Deficits (B4ECT-ReCoDe): development and validation.

    Science.gov (United States)

    Viswanath, Biju; Harihara, Shashidhara N; Nahar, Abhinav; Phutane, Vivek Haridas; Taksal, Aarati; Thirthalli, Jagadisha; Gangadhar, Bangalore N

    2013-06-01

    The use of electroconvulsive therapy (ECT) in treatment of psychiatric disorders is associated with adverse cognitive effects. There is a need to develop a short assessment tool of cognitive functions during the course of ECT. This study aimed at developing and validating a short, sensitive battery to assess cognitive deficits associated with ECT in India. Battery for ECT Related Cognitive Deficits (B4ECT-ReCoDe), a brief cognitive battery (20-30 min) to assess verbal, visual, working and autobiographic memory, sustained attention, psychomotor speed and subjective memory impairment, was administered to 30 in-patients receiving bilateral ECT, one day after the 1st, 3rd and 6th ECT. Data was analysed using repeated measures analysis of variance and Pearson's correlation. Significant deficits were found in verbal, visual and autobiographic memory, psychomotor speed. Subjective experience of memory loss correlated positively with verbal memory impairment. B4ECT-ReCoDe, a brief, sensitive measure of cognitive impairments associated with ECT can be used in routine clinical practice. Copyright © 2013 Elsevier B.V. All rights reserved.

  3. Sociodemographic characterization of ECT utilization in Hawaii.

    Science.gov (United States)

    Ona, Celia M; Onoye, Jane M; Goebert, Deborah; Hishinuma, Earl; Bumanglag, R Janine; Takeshita, Junji; Carlton, Barry; Fukuda, Michael

    2014-03-01

    Minimal research has been done on sociodemographic differences in utilization of electroconvulsive therapy (ECT) for refractory depression, especially among Asian Americans and Pacific Islanders. This study examined sociodemographic and diagnostic variables using retrospective data from Hawaii, an island state with predominantly Asian Americans and Pacific Islanders. Retrospective data were obtained from an inpatient and outpatient database of ECT patients from 2008 to 2010 at a tertiary care community hospital on O'ahu, Hawaii. There was a significant increase in overall ECT utilization from 2008 to 2009, with utilization remaining stable from 2009 to 2010. European Americans (41%) and Japanese Americans (29%) have relatively higher rates of receiving ECT, and Filipino Americans and Native Hawaiians have relatively lower rates in comparison with their population demographics. Japanese Americans received significantly more ECT procedures than European Americans. Electroconvulsive therapy is underutilized by certain sociodemographic groups that may benefit most from the treatment. There are significant differences in ECT usage based on ethnicity. Such differences may be related to help-seeking behavior, economic differences, and/or attitudes regarding mental illness. Further research is needed to elucidate the reasons for differences in utilization.

  4. Facilitating practical knowledge by using ECT

    Directory of Open Access Journals (Sweden)

    Rita Jentoft

    2009-11-01

    Full Text Available Practical skills constitute essential knowledge in occupational therapy. The knowledge is situation- and experience-based, generated from within the situation. In a particular program for educating Palestinian Occupational Therapists in Gaza, facilitating such knowledge proved to be difficult. Due to travel restrictions and an unstable political situation, teachers and students were separated. Educational communication technology (ECT like videoconferences, internet and videos became new and necessary tools. This article is based on results from an action research project which followed the process of using flexible forms of learning and developing an internet based learning programme named Ergonet. The learning process of the students using it was examined with the aim of answering the following research question: How can flexible forms of learning be developed and used to facilitate practical knowledge in Occupational Therapy education? The development and implementation of Ergonet as a supporting device in students’ learning of practical skills is described through the experience of the teachers involved. The results indicate how rote-learning and lack of reflective and critical thinking, firmly established among Palestinian students, have been challenged and changed by the didactic use of Ergonet.

  5. Bilateral and unilateral ECT: effects on verbal and nonverbal memory.

    Science.gov (United States)

    Squire, S R; Slater, P C

    1978-11-01

    The memory loss associated with bilateral and nondominant unilateral ECT was assessed with verbal memory tests known to be sensitive to left temporal lobe dysfunction and with nonverbal memory tests known to be sensitive to right temporal lobe dysfunction. Bilateral ECT markedly impaired delayed retention of verbal and nonverbal material. Right unilateral ECT impaired delayed retention of nonverbal material without measurably affecting retention of verbal material. Nonverbal memory was affected less by right unilateral ECT than by bilateral ECT. These findings, taken together with a consideration of the clinical efficacy of the two types of treatment, make what appears to be a conclusive case for unilateral over bilateral ECT.

  6. Embarazo ectópico abdominal

    OpenAIRE

    Karen Luz Torres Rojas; Miguel Blanco Paz; Gerardo Celorrio Montiel

    2015-01-01

    La incidencia de embarazo ectópico ha aumentado en los últimos años hasta 1:43 recién nacidos. La variedad abdominal es una de las menos frecuentes, su incidencia es de 1:10mil  nacidos vivos. El 1% de los embarazos ectópicos son abdominales y la implantación en el epiplón es una rara entidad. Pueden clasificarse como primarios o secundarios en función de que se originen o no en la cavidad peritoneal. Se presenta un caso de embarazo abdominal primario, localizado en cara posterior del útero y...

  7. Electroconvulsive therapy (ECT) in schizophrenia: a review of recent literature.

    Science.gov (United States)

    Sanghani, Sohag N; Petrides, Georgios; Kellner, Charles H

    2018-03-09

    ECT remains an important, yet underutilized, treatment for schizophrenia. Recent research shows that medication-resistant patients with schizophrenia, including those resistant to clozapine, respond well to ECT augmentation. The purpose of this article is to review recent studies of the use of ECT in the treatment of schizophrenia. We performed an electronic database search for articles on ECT and schizophrenia, published in 2017. The main themes of these articles are: epidemiological data on ECT use from various countries; retrospective studies, prospective studies and meta-analyses focusing on efficacy and cognitive side-effects of ECT in schizophrenia; ECT technical parameters and potential biomarkers. There is growing evidence to support the use of ECT for augmentation of antipsychotic response in the treatment of schizophrenia. Cognitive side-effects are generally mild and transient. In fact, many studies show improvement in cognition, possibly related to the improvement in symptoms. There is wide variation among countries in the use of ECT for the treatment of schizophrenia. There are also variations in the choice of ECT electrode placement, parameters and schedules. These technical differences are likely minor and should not interfere with the treatment being offered to patients. Further, long-term studies are needed to optimize ECT treatment parameters, to examine the effect of maintenance ECT and to investigate neuroimaging/biomarkers to understand the mechanism of action and identify potential response predictors to ECT.

  8. Image reconstruction in electrostatic tomography using a priori knowledge from ECT

    International Nuclear Information System (INIS)

    Zhou Bin; Zhang Jianyong; Xu Chuanlong; Wang Shimin

    2011-01-01

    Research highlights: → A dual-mode sensor technique based on ECT and EST is proposed. → The interference of the charged particles to ECT can be eliminated. → A priori knowledge from ECT improves the inversion accuracy. - Abstract: In gas-solid two-phase flow, the charge distribution is a very important process parameter which is useful to the study of electrostatic adhesion. Electrostatic tomography (EST) is a relatively new non-intrusive technique which can be used to acquire charge distribution. However, due to limited measurements, the quality of image reconstruction is poor. In this paper, a dual-mode sensor technique based on electrical capacitance tomography (ECT) and EST is proposed. The theoretical analysis and the numerical simulation results reveal that the permittivity distribution obtained from ECT can provide a priori knowledge for the inversion calculation of EST, so that the accuracy of spatial sensitivity calculation in EST can be improved. This proposed technique is expected to be prospective in industrial applications and will also be beneficial to the research on the fluid dynamics of gas-solid two-phase flow.

  9. High-sensitivity Cardiac Troponin Elevation after Electroconvulsive Therapy (ECT)

    Science.gov (United States)

    Duma, Andreas; Pal, Swatilika; Johnston, Joshua; Helwani, Mohammad A.; Bhat, Adithya; Gill, Bali; Rosenkvist, Jessica; Cartmill, Christopher; Brown, Frank; Miller, J. Philip; Scott, Mitchell G; Sanchez-Conde, Francisco; Jarvis, Michael; Farber, Nuri B.; Zorumski, Charles F.; Conway, Charles; Nagele, Peter

    2017-01-01

    Background While electroconvulsive therapy (ECT) is widely regarded as a life-saving and safe procedure, evidence regarding its effects on myocardial cell injury are sparse. The objective of this investigation was to determine incidence and magnitude of new cardiac troponin elevation after ECT using a novel high-sensitivity cardiac troponin I (hscTnI) assay. Methods This was a prospective cohort study in adult patients undergoing ECT in a single academic center (up to three ECT treatments per patient). The primary outcome was new hscTnI elevation after ECT, defined as an increase of hscTnI >100% after ECT compared to baseline with at least one value above the limit of quantification (10 ng/L). 12-lead ECG and hscTnI values were obtained prior to and 15–30 minutes after ECT; in a subset of patients an additional 2-hour hscTnI value was obtained. Results The final study population was 100 patients and a total of 245 ECT treatment sessions. Eight patients (8/100, 8%) experienced new hscTnI elevation after ECT with a cumulative incidence of 3.7% (9/245 treatments; one patient had two hscTnI elevations), two of whom had a non-ST-elevation myocardial infarction (incidence 2/245, 0.8%). Median hscTnI concentrations did not increase significantly after ECT. Tachycardia and/or elevated systolic blood pressure developed after approximately two thirds of ECT treatments. Conclusions ECT appears safe from a cardiac standpoint in a large majority of patients. A small subset of patients with pre-existing cardiovascular risk factors, however, may develop new cardiac troponin elevation after ECT, the clinical relevance of which is unclear in the absence of signs of myocardial ischemia. PMID:28166110

  10. The phase array technology: concepts, sensors and applications; La technology Phase array: concepts, capteurs et applications

    Energy Technology Data Exchange (ETDEWEB)

    Poguet, J.; Marguet, J.; Pichonnat, F.; Chupin, L. [Imasonic SA, 25 - Besancon (France)

    2001-07-01

    The piezo-composite materials allowed, since many years, the development of a new technology for the ultrasonic sensors adapted to the nondestructive testing: the phase array sensors. These sensors are designed with a great number of elementary sensors. The different concepts with their associated advantages and performance are presented in this paper. Many applications using this technology are also proposed and discussed in the domains of the nuclear industry, the aeronautic industry and the on-line control. (A.L.B.)

  11. Study on automatic ECT data evaluation by using neural network

    International Nuclear Information System (INIS)

    Komatsu, H.; Matsumoto, Y.; Badics, Z.; Aoki, K.; Nakayasu, F.; Hashimoto, M.; Miya, K.

    1994-01-01

    At the in--service inspection of the steam generator (SG) tubings in Pressurized Water Reactor (PWR) plant, eddy current testing (ECT) has been widely used at each outage. At present, ECT data evaluation is mainly performed by ECT data analyst, therefore it has the following problems. Only ECT signal configuration on the impedance trajectory is used in the evaluation. It is an enormous time consuming process. The evaluation result is influenced by the ability and experience of the analyst. Especially, it is difficult to identify the true defect signal hidden in background signals such as lift--off noise and deposit signals. In this work, the authors performed the study on the possibility of the application of neural network to ECT data evaluation. It was demonstrated that the neural network proved to be effective to identify the nature of defect, by selecting several optimum input parameters to categorize the raw ECT signals

  12. Embarazo ectópico abdominal

    Directory of Open Access Journals (Sweden)

    Karen Luz Torres Rojas

    2015-12-01

    Full Text Available La incidencia de embarazo ectópico ha aumentado en los últimos años hasta 1:43 recién nacidos. La variedad abdominal es una de las menos frecuentes, su incidencia es de 1:10mil  nacidos vivos. El 1% de los embarazos ectópicos son abdominales y la implantación en el epiplón es una rara entidad. Pueden clasificarse como primarios o secundarios en función de que se originen o no en la cavidad peritoneal. Se presenta un caso de embarazo abdominal primario, localizado en cara posterior del útero y recto, con edad gestacional 16 semanas y feto muerto, en una paciente de 25 años, atendida en el Hospital General “Dr. Ernesto Guevara de la Serna”, con antecedentes de salud, G0 P0 A0, con método anticonceptivo DIU retirado seis meses antes. Se trata de un embarazo abdominal primario, puesto que la anatomía patológica informó ausencia de invasión trofloblástica en la trompa izquierda. El manejo placentario en este caso no permitió realizar la remoción completa de la misma. El seguimiento ecográfico y  control de gonadotropinas evidenció una evolución favorable de la paciente, sin requerir manejo de metotrexate.

  13. The hydrogen technology assessment, phase 1

    Science.gov (United States)

    Bain, Addison

    1991-01-01

    The purpose of this phase 1 report is to begin to form the information base of the economics and energy uses of hydrogen-related technologies on which the members of the National Hydrogen Association (NHA) can build a hydrogen vision of the future. The secondary goal of this report is the development of NHA positions on national research, development, and demonstration opportunities. The third goal, with the aid of the established hydrogen vision and NHA positions, is to evaluate ongoing federal research goals and activities. The evaluations will be performed in a manner that compares the costs associated with using systems that achieve those goals against the cost of performing those tasks today with fossil fuels. From this ongoing activity should emerge an NHA information base, one or more hydrogen visions of the future, and cost and performance targets for hydrogen applications to complete in the market place.

  14. on The Knowledge and Attitudes of Medical Students Towards ECT

    African Journals Online (AJOL)

    There is limited literature on attitude and knowledge of medical students towards ECT from Asian and African countries.[11-14] A prior study from India reported less favorable attitudes among medical students towards ECT. The undergraduate medical curriculum in India has been criticized for inadequately preparing ...

  15. The Global ECT-MRI Research Collaboration (GEMRIC)

    DEFF Research Database (Denmark)

    Oltedal, Leif; Bartsch, Hauke; Sørhaug, Ole Johan Evjenth

    2017-01-01

    (ECT), generally prescribed for the most severely depressed and when standard treatments fail, produces a more rapid response and remains the most effective intervention for severe depression. Exploring the neurobiological effects of ECT is thus an ideal approach to better understand the mechanisms...... of successful therapeutic response. Though several recent neuroimaging studies show structural and functional changes associated with ECT, not all brain changes associate with clinical outcome. Larger studies that can address individual differences in clinical and treatment parameters may better target...... biological factors relating to or predictive of ECT-related therapeutic response. We have thus formed the Global ECT-MRI Research Collaboration (GEMRIC) that aims to combine longitudinal neuroimaging as well as clinical, behavioral and other physiological data across multiple independent sites. Here, we...

  16. Hybrid Propulsion Technology for Robotic Science Missions, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — C3 Propulsion's Hybrid Propulsion Technology will be applied to a NASA selected Sample Return Mission. Phase I will demonstrate Proof-of-Principle and Phase II will...

  17. Advanced Situation Awareness Technologies, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Situation Awareness Technologies (ASAT) will facilitate exploration of the moon surface, and other planetary bodies. This powerful technology will also find...

  18. Phase Change Permeation Technology for Environmental Control & Life Support Systems

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA is evaluating Dutyion™, a phase change permeation membrane technology developed by Design Technology and Irrigation (DTI), for use in future advanced life...

  19. Catatonia with schizophrenia: From ECT to rTMS.

    Science.gov (United States)

    Stip, E; Blain-Juste, M-E; Farmer, O; Fournier-Gosselin, M-P; Lespérance, P

    2017-12-11

    Electroconvulsive therapy is indicated in cases of catatonic schizophrenia following a failure of the challenge test with lorazepam or Zolpidem ® . Some patients need maintenance treatment with ECT. Repetitive Transcranial Magnetic Stimulation (rTMS) and anodal Transcranial direct-current stimulation (tDCS) might be effective against catatonia. Consider an alternative to ECT for a refractory patient. Twenty-one articles were identified mainly based on case reports series were found using search on Medline, Google Scholar, PsychInfo, CAIRNS. Key words were:"catatonia", and "rTMS", and more generally with"ECT","tDCS","Zolpidem ® ". At the end there were only six case reports with rTMS and three with tDCS. We discussed the alternative to ECT and follow up rTMS strategies illustrated by these case reports. Patients mean age was 35; numbers of previous ECT vary from zero to 556; the most common motor threshold (MT) is 80%, with two patients with 110%, the most common treatment placement is L DLPFC. In one of them, ECT was the only acute-state or maintenance treatment effective in this patient, who underwent 556 ECT sessions over 20 years. High-frequency rTMS was considered as a possible alternative, given the potential adverse effects of chronic maintenance ECT in a patient with comorbid epilepsy. rTMS treatment was 3-4×/week and over time extended to once every two weeks. A persistent objective improvement in catatonia was observed on the Bush-Francis Catatonia Rating Scale. rTMS is helpful for acute and maintenance treatment for catatonic schizophrenia who both failed multiple pharmacologic interventions and had safety concerns with continuing maintenance ECT. Clinicians should consider rTMS as a potential treatment option for refractory catatonia. Copyright © 2017 L'Encéphale, Paris. Published by Elsevier Masson SAS. All rights reserved.

  20. Factores de riesgo asociados al embarazo ectópico

    OpenAIRE

    Jónathan Hernández Núñez; Magel Valdés Yong; Andrés Oscar Torres Chávez

    2013-01-01

    Fundamento: el embarazo ectópico se ha duplicado en la mayor parte de los países industrializados y representa una de las principales causas de muerte materna. Objetivo: identificar factores de riesgo que predisponen al embarazo ectópico.Métodos: estudio de casos y controles realizado en un universo de 132 pacientes del Municipio Habana del Este, operadas de embarazo ectópico en el Hospital Dr. Luís Díaz Soto desde el 2009 al 2011. Se escogió una muestra al azar de 66 pacientes que constituyó...

  1. Improved hyperspectral imaging technologies, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Improved hyperspectral imaging technologies could enable lower-cost analysis for planetary science including atmospheric studies, mineralogical investigations, and...

  2. Advanced Situation Awareness Technologies, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Situation Awareness Technologies (ASAT) will facilitate exploration of the moon surface, and other planetary bodies. ASAT will create an Advanced Situation...

  3. Application of single photon ECT for dynamic study

    International Nuclear Information System (INIS)

    Mukai, T.; Ishii, Y.; Tamaki, N.

    1982-01-01

    Feasibility of dynamic study in a form of ECT using a rotating gamma camera was evaluated. Since it takes longer one around time sampling, application for the dynamic study is limited under following conditions; 1) physiological gated process, 2) slow clearance process, 3) physiological steady state process. The gated study was applicated for heart pumping action synchronized with ECG. The ECG gated heart ECT either of blood pool or myocardium was useful to reveal a subtle wall motion abnormalities in a tomographic plane, even when a planar imaging failed to reveal it. As for slow dynamic process of tracer, an excretion process of hepatobiliary agent, was subjected to be analyzed in order to calculate clearance rate at each pixel. As for steady state process, an ECT of regional celebral blood flow (rCBF) was investigated during continuous infusion into intracarotid artery. All of these technique were proved to have a clinical feasibility and to potentiate usefulness of the single photon ECT (SPECT)

  4. An AST-ELM Method for Eliminating the Influence of Charging Phenomenon on ECT.

    Science.gov (United States)

    Wang, Xiaoxin; Hu, Hongli; Jia, Huiqin; Tang, Kaihao

    2017-12-09

    Electrical capacitance tomography (ECT) is a promising imaging technology of permittivity distributions in multiphase flow. To reduce the effect of charging phenomenon on ECT measurement, an improved extreme learning machine method combined with adaptive soft-thresholding (AST-ELM) is presented and studied for image reconstruction. This method can provide a nonlinear mapping model between the capacitance values and medium distributions by using machine learning but not an electromagnetic-sensitive mechanism. Both simulation and experimental tests are carried out to validate the performance of the presented method, and reconstructed images are evaluated by relative error and correlation coefficient. The results have illustrated that the image reconstruction accuracy by the proposed AST-ELM method has greatly improved than that by the conventional methods under the condition with charging object.

  5. An AST-ELM Method for Eliminating the Influence of Charging Phenomenon on ECT

    Directory of Open Access Journals (Sweden)

    Xiaoxin Wang

    2017-12-01

    Full Text Available Electrical capacitance tomography (ECT is a promising imaging technology of permittivity distributions in multiphase flow. To reduce the effect of charging phenomenon on ECT measurement, an improved extreme learning machine method combined with adaptive soft-thresholding (AST-ELM is presented and studied for image reconstruction. This method can provide a nonlinear mapping model between the capacitance values and medium distributions by using machine learning but not an electromagnetic-sensitive mechanism. Both simulation and experimental tests are carried out to validate the performance of the presented method, and reconstructed images are evaluated by relative error and correlation coefficient. The results have illustrated that the image reconstruction accuracy by the proposed AST-ELM method has greatly improved than that by the conventional methods under the condition with charging object.

  6. ECTS på de videregående uddannelser

    DEFF Research Database (Denmark)

    Sørensen, Martin; Silleborg, Ellen

    Denne rapport præsenterer en undersøgelse af universiteters, professionshøjskolers, erhvervsakademiers og kunstneriske uddannelsesinstitutioners anvendelse af European Credit and Transfer and Accumulation System (ECTS-systemet)......Denne rapport præsenterer en undersøgelse af universiteters, professionshøjskolers, erhvervsakademiers og kunstneriske uddannelsesinstitutioners anvendelse af European Credit and Transfer and Accumulation System (ECTS-systemet)...

  7. Phase Occulted Nulling Coronagraph: Instrument Technology Advancement

    Data.gov (United States)

    National Aeronautics and Space Administration — The Phase Occulted Nulling Coronagraph (PONC), invented by R. Lyon, is a viable and game-changing approach for future arbitrary shaped aperture exoplanet science...

  8. The effects of ECT on cognitive functioning in the elderly: a review

    NARCIS (Netherlands)

    Tielkes, C.E.M.; Comijs, H.C.; Verwijk, E.; Stek, M.L.

    2008-01-01

    Background: Electroconvulsive therapy (ECT) as a single course or in maintenance form (M-ECT) is an effective treatment in depressed elderly. However, ECT may have adverse effects on cognition. Objective: To review all studies from 1980-2006 on ECT and cognition in the elderly with a minimum age of

  9. Advanced Display Interface Technology, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — CMC proposes, along with our collaborator, Dr. Mica Endlsey of SA Technologies, to produce a framework from which an Adaptive User Interface (AUI) can be modeled and...

  10. Extreme Environment Hybrid Gearbox Technology, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Nearly all mechanism applications require some form of gearbox. Wet lubricated gearbox technologies are limited to the relatively narrow temperature ranges of their...

  11. Project inspection using mobile technology - phase II : assessing the impacts of mobile technology on project inspection.

    Science.gov (United States)

    2015-01-01

    As mobile technology becomes widely available and affordable, transportation agencies can use this : technology to streamline operations involved within project inspection. This research, conducted in two : phases, identified opportunities for proces...

  12. Novel treatments of mood disorders based on brain circuitry (ECT, MST, TMS, VNS, DBS).

    Science.gov (United States)

    George, Mark S; Nahas, Ziad; Li, Xiangbao; Kozel, F Andrew; Anderson, Berry; Yamanaka, Kaori; Chae, Jeong-Ho; Foust, Milton J

    2002-10-01

    Advances in understanding the functional and structural anatomy of depression outlined in this issue set the stage for attempting to manipulate implicated brain regions as potential antidepressant therapies. On the one hand, these circuit- and device-based approaches to treating depression are not new. Electroconvulsive therapy (ECT) dates back to the beginning of modern biologic psychiatry with the discovery and rapid increase of first chemical (around 1910), and then later ECT. On the other hand, this area represents an important paradigm shift with treatments that are radical and different. A dizzying array of diverse technologies now allows researchers to stimulate the brain in undreamed of ways. However, the approaches described in this article are still considered experimental and are not approved for use in the United States by the Food and Drug Administration (FDA), except ECT, which predates the FDA. These device-based approaches to brain stimulation offer promise as potential acute and even longterm treatments. Additionally, the research determining whether and how these devices work to influence mood promises to help unravel the neurophysiology of mood regulation. These novel treatments are thus the translational tools to bridge from advances in brain imaging, into new treatments for depressed patients. Copyright 2002, Elsevier Science (USA). All rights reserved.

  13. Six phase soil heating. Innovative technology summary report

    International Nuclear Information System (INIS)

    1995-04-01

    Six Phase Soil Heating (SPSH) was developed to remediate soils contaminated with volatile and semi-volatile organic compounds. SPSH is designed to enhance the removal of contaminates from the subsurface during soil vapor extraction. The innovation combines an emerging technology, six-phase electric heating, with a baseline technology, soil vapor extraction, to produce a more efficient in situ remediation systems for difficult soil and/or contaminate applications. This document describes the technology and reports on field demonstrations conducted at Savannah River and the Hanford Reservation

  14. Informing Early-Phase Technology Decisions in Paradigmatic Innovation

    DEFF Research Database (Denmark)

    Jensen, Ole Kjeldal; Ahmed-Kristensen, Saeema

    2010-01-01

    The innovation activities of a company facing paradigmatic change with regard to both technology and business model includes taking many decisions, where the information available, as well as the decision makers’ ability to understand this information, is limited. Technology decisions in the very...... the provision of knowledge and information required in the early phases of technology decisions. This article reports on the first part of this project, and provides a descriptive model for understanding the complexity in the early phase intuitive decision-making process, answering the specific research...... question: How are decisions regarding technologies informed in the early phases of innovation, when dealing with paradigmatic “new to the company” knowledge fields? To explore the question, a case study; investigating the decisions made for radical new innovations, and the knowledge needed for supporting...

  15. Development of novel EMAT-ECT multi-sensor and verification of its feasibility

    International Nuclear Information System (INIS)

    Suzuki, Kenichiro; Uchimoto, Tetsuya; Takagi, Toshiyuki; Sato, Takeshi; Guy, Philippe; Casse, Amelie

    2006-01-01

    In this study, we propose a novel EMAT-ECT multi sensor aiming at advanced structural health monitoring. For the purpose, proto-type EMAT-ECT multi-sensor was developed and their functions both as ECT and EMAT prove were evaluated. Experimental results of pulse ECT using the EMAT-ECT multi-sensor showed that the proposed sensor has a capability of detection and sizing of flaws. Experimental results of EMAT evaluation using the EMAT-ECT multi-sensor showed that ultrasonic wave was transmitted by EMAT-ECT multi sensor and flaw echo was observed. These results imply that EMAT-ECT multi sensor is available for pulse ECT and EMAT. (author)

  16. Clean Cast Steel Technology, Phase IV

    Energy Technology Data Exchange (ETDEWEB)

    Charles E. Bates

    2003-02-24

    The objective of the Clean Cast Steel Technology Program was to improve casting product quality by removing or minimizing oxide defects and to allow the production of higher integrity castings for high speed machining lines. Previous research has concentrated on macro-inclusions that break, chip, or crack machine tool cutters and drills and cause immediate shutdown of the machining lines. The overall goal of the project is to reduce the amount of surface macro-inclusions and improve the machinability of steel castings. Macro-inclusions and improve the machinability of steel castings. Macro-inclusions have been identified by industrial sponsors as a major barrier to improving the quality and marketability of steel castings.

  17. Advanced Lost Foam Casting Technology - Phase V

    Energy Technology Data Exchange (ETDEWEB)

    Wanliang Sun; Harry E. Littleton; Charles E. Bates

    2004-04-29

    Previous research, conducted under DOE Contracts DE-FC07-89ID12869, DE-FC07-93ID12230 and DE-FC07-95ID113358 made significant advances in understanding the Lost Foam Casting (LFC) Process and clearly identified areas where additional developments were needed to improve the process and make it more functional in industrial environments. The current project focused on eight tasks listed as follows: Task 1--Computational Model for the Process and Data Base to Support the Model; Task 2--Casting Dimensional Accuracy; Task 3--Pattern Production; Task 4--Improved Pattern Materials; Task 5--Coating Control; Task 6--In-Plant Case Studies; Task 7--Energy and the Environmental Data; and Task 8--Technology Transfer. This report summarizes the work done on all tasks in the period of October 1, 1999 through September 30, 2004. The results obtained in each task and subtask are summarized in this Executive Summary and details are provided in subsequent sections of the report.

  18. Successful ECT in a case of Leonhard's cycloid psychosis.

    Science.gov (United States)

    Little, J D; Ungvari, G S; McFarlane, J

    2000-03-01

    In Leonhard's nosological system, acute, episodic psychoses with good short-term and long-term prognoses, characterized by mixed affective and schizophrenic features, confusion, and alternating psychomotor retardation and excitement are called cycloid psychoses. According to clinical lore, patients with cycloid psychoses show an excellent and prompt response to electroconvulsive therapy (ECT). We describe a patient with typical motility psychosis, a subtype of cycloid psychoses, who failed to respond to a combination of antipsychotic and benzodiazepine medication but quickly recovered after the administration of ECT.

  19. Delirium and concomitant use of lithium+electroconvulsive therapy (ECT

    Directory of Open Access Journals (Sweden)

    Sadeghi M

    2001-09-01

    Full Text Available Concomitant use of lithium and E.C.T has always been accused to cause delirium in patients receiving such a combination. In this study incidence of delirium in patients who receive lithium+E.C.T. concurrently has been compared with those who have been treated with E.C.T. only. Of 49 patients who had Bipolar Mood Disorder (B.M.D. 1 disorder (manic episode 24 were given E.C.T.+lithium and 25 were treated with E.C.T. Only, 3 patients of the first group and 2 patients of the second group developed delirium. The difference between two groups was not statistically significant. Another finding was that all cases of delirium developed in patients who were above 35 years old (P value=0.001. These findings show that combination of E.C.T. and Lithium may not be so harmful as it was once considered. On the other hand it could be concluded that increased age may be a risk factor for delirium in such a combination.

  20. Sevoflurane induction for electroconvulsive therapy (ECT)- a clinical ...

    African Journals Online (AJOL)

    Objective: The search for an ideal induction agent for use in electroconvulsive therapy (ECT) has been a long one. To date numerous agents have been used and there is little uniformity in clinical practice regarding agent of choice. Recent reports in the literature suggesting the efficacy of the volatile anaesthetic agent ...

  1. Multi-frequency exciting and spectrogram-based ECT method

    CERN Document Server

    Chady, T

    2000-01-01

    The purpose of this paper is to experimentally demonstrate advantages of a multi-frequency ECT system. In this system, a precise crack imaging was achieved by using spectrograms obtained from an eddy-current probe multi-frequency response. A complex signal containing selected sinusoidal components was used as an excitation. The results of measurements for various test specimens are presented.

  2. Electro-Convulsive Therapy (ECT): an Egyptian perspective

    African Journals Online (AJOL)

    Adele

    negative perceptions of ECT arising from semantics.9,10. In Egypt we have noticed, anecdotally, a change in refusal and stigma with a decrease in either after the introduction of these new names in the university hospitals. In addition families were more accepting of this treatment for a current episode of illness having on ...

  3. Sevoflurane induction for electroconvulsive therapy (ECT)- a clinical ...

    African Journals Online (AJOL)

    derivatives and as such these agents have the adverse quality of increasing the patients' seizure threshold .... assessment of non-response to various treatment options offered, including pharmacological, psychological ..... sevoflurane, if any, in the future of ECT can be firmly established. References. 1. Ding Z, White PF.

  4. Fronto-Temporal Connectivity Predicts ECT Outcome in Major Depression

    Directory of Open Access Journals (Sweden)

    Amber M. Leaver

    2018-03-01

    Full Text Available BackgroundElectroconvulsive therapy (ECT is arguably the most effective available treatment for severe depression. Recent studies have used MRI data to predict clinical outcome to ECT and other antidepressant therapies. One challenge facing such studies is selecting from among the many available metrics, which characterize complementary and sometimes non-overlapping aspects of brain function and connectomics. Here, we assessed the ability of aggregated, functional MRI metrics of basal brain activity and connectivity to predict antidepressant response to ECT using machine learning.MethodsA radial support vector machine was trained using arterial spin labeling (ASL and blood-oxygen-level-dependent (BOLD functional magnetic resonance imaging (fMRI metrics from n = 46 (26 female, mean age 42 depressed patients prior to ECT (majority right-unilateral stimulation. Image preprocessing was applied using standard procedures, and metrics included cerebral blood flow in ASL, and regional homogeneity, fractional amplitude of low-frequency modulations, and graph theory metrics (strength, local efficiency, and clustering in BOLD data. A 5-repeated 5-fold cross-validation procedure with nested feature-selection validated model performance. Linear regressions were applied post hoc to aid interpretation of discriminative features.ResultsThe range of balanced accuracy in models performing statistically above chance was 58–68%. Here, prediction of non-responders was slightly higher than for responders (maximum performance 74 and 64%, respectively. Several features were consistently selected across cross-validation folds, mostly within frontal and temporal regions. Among these were connectivity strength among: a fronto-parietal network [including left dorsolateral prefrontal cortex (DLPFC], motor and temporal networks (near ECT electrodes, and/or subgenual anterior cingulate cortex (sgACC.ConclusionOur data indicate that pattern classification of multimodal f

  5. Electroconvulsive Therapy in Sweden 2013: Data From the National Quality Register for ECT.

    Science.gov (United States)

    Nordanskog, Pia; Hultén, Martin; Landén, Mikael; Lundberg, Johan; von Knorring, Lars; Nordenskjöld, Axel

    2015-12-01

    The use of electroconvulsive therapy (ECT) varies across countries. The aim of this study was to describe and explore the use of ECT in Sweden in 2013. The Swedish mandatory patient register of the National Board of Health and Welfare includes information on diagnoses and treatments, including ECT. All 56 hospitals that provide ECT in Sweden also report to the nonmandatory national quality register for ECT, which contains information on patient and treatment characteristics. In this study, we combined data from both registers. In addition, all hospitals responded to a survey concerning equipment and organization of ECT. We identified 3972 unique patients who received ECT in Sweden in 2013. This translates into 41 ECT-treated individuals per 100,000 inhabitants. Of these patients, 85% opted to participate in the quality register. The median age was 55 years (range, 15-94 years), and 63% were women. The indication was depression in 78% of the treatment series. Of 4 711 hospitalized patients with severe depression, 38% received ECT. The median number of treatments per index series was 7. Unilateral treatment was used in 86% of the series. In Sweden, ECT is used at a relatively high rate as compared with other western countries, and the rate was unchanged from the last survey in 1975. However, there is room for improvement in the specificity of use and availability of ECT for disorders where ECT is considered a first-line treatment.

  6. Informing Early-Phase Technology Decisions in Paradigmatic Innovation

    DEFF Research Database (Denmark)

    Jensen, Ole Kjeldal; Ahmed-Kristensen, Saeema

    2010-01-01

    The innovation activities of a company facing paradigmatic change with regard to both technology and business model includes taking many decisions, where the information available, as well as the decision makers’ ability to understand this information, is limited. Technology decisions in the very...... question: How are decisions regarding technologies informed in the early phases of innovation, when dealing with paradigmatic “new to the company” knowledge fields? To explore the question, a case study; investigating the decisions made for radical new innovations, and the knowledge needed for supporting...... early phases of innovation have been explored in a Scandinavian energy-utilities company facing exactly these paradigmatic changes. In the company there are 5500 employees, with the major footprint in Denmark. The company has activities in the full energy value-chain including: production & trade of oil...

  7. The influence of name on the acceptability of ECT: the importance of political correctness.

    Science.gov (United States)

    Andrade, Chittaranjan; Thyagarajan, Shivashanmugam

    2007-06-01

    Attitudes toward a treatment influence the acceptability of the treatment. There has been no study of how attitudes toward electroconvulsive therapy (ECT) are influenced by what ECT is called. A sample of 125 laypersons was drawn from 3 social settings in Bangalore, India. A short, oral questionnaire was administered to determine the acceptability of ECT under 3 different names: 2 actual and 1 coined. The acceptability of ECT was highest for the coined name electrostimulatory therapy (53%), intermediate for the occasionally used name electroshock therapy (38%), and least for the commonly used name electroconvulsive therapy (9%) (P political correctness, political correctness should be applied to the description of ECT.

  8. Early phase Technology Assessment of nanotechnology in oncology.

    Science.gov (United States)

    Retèl, Valesca P; Hummel, Marjan J M; van Harten, Willem H

    2008-01-01

    To perform early Technology Assessment (TA) of nanotechnology in oncology. The possibilities of nanotechnology for detection (imaging), diagnosis and treatment of cancer are subject of different research programs where major investments are concerned. As a range of bio- nanotechnologies is expected to enter the oncology field it is relevant to consider the various aspects involved in especially early TA. This article provides two cases of early assessment of (predecessors of) nanotechnologies: Microarray Analysis and Photodynamic Therapy implementation, which methodology can be extrapolated to other nanotechnologies in oncology. Constructive Technology Assessment (CTA) is used for the introduction of technologies that are still in a dynamic phase of development or in an early stage of diffusion. The selection of studied aspects in CTA is based on: clinical aspects (safety, efficacy, and effectiveness), economic (cost-effectiveness), patient related (QoL, ethical/juridical and psychosocial), organizational aspects (diffusion and adoption) and scenario drafting. The features of the technology and the phase of implementation are decisive for choices and timing of the specific aspects to be studied. A framework was drafted to decide on the relevant aspects. In the first case, early implementation of Microarray Analysis; clinical effectiveness, logistics, patient centeredness and scenario drafting were given priority. Related to the diffusion-phase of Photodynamic Therapy however other aspects were evaluated, such as early cost-effectiveness analysis for possible reimbursement. Often CTA will result in a mixed method design. Especially scenario drafting is a powerful instrument to predict possible developments that can be anticipated upon in the assessment. CTA is appropriate for the study of early implementation of new technologies in oncology. In early TA small series often necessitate a mix of quantitative and qualitative methods. The features of nanotechnology

  9. An Overview of SBIR Phase 2 Communications Technology and Development

    Science.gov (United States)

    Nguyen, Hung D.; Steele, Gynelle C.

    2015-01-01

    Technological innovation is the overall focus of NASA's Small Business Innovation Research (SBIR) program. The program invests in the development of innovative concepts and technologies to help NASA's mission directorates address critical research and development needs for agency projects. This report highlights innovative SBIR Phase II projects from 2007-2012 specifically addressing areas in Communications Technology and Development which is one of six core competencies at NASA Glenn Research Center. There are eighteen technologies featured with emphasis on a wide spectrum of applications such as with a security-enhanced autonomous network management, secure communications using on-demand single photons, cognitive software-defined radio, spacesuit audio systems, multiband photonic phased-array antenna, and much more. Each article in this booklet describes an innovation, technical objective, and highlights NASA commercial and industrial applications. This report serves as an opportunity for NASA personnel including engineers, researchers, and program managers to learn of NASA SBIR's capabilities that might be crosscutting into this technology area. As the result, it would cause collaborations and partnerships between the small companies and NASA Programs and Projects resulting in benefit to both SBIR companies and NASA.

  10. An Overview of 2014 SBIR Phase 1 and Phase 2 Communications Technology and Development

    Science.gov (United States)

    Nguyen, Hung D.; Steele, Gynelle C.; Morris, Jessica R.

    2015-01-01

    NASA's Small Business Innovation Research (SBIR) program focuses on technological innovation by investing in development of innovative concepts and technologies to help NASA mission directorates address critical research needs for Agency programs. This report highlights eight of the innovative SBIR 2014 Phase I and Phase II projects that emphasize one of NASA Glenn Research Center's six core competencies-Communication Technology and Development. The technologies cover a wide spectrum of applications such as X-ray navigation, microsensor instrument for unmanned aerial vehicle airborne atmospheric measurements, 16-element graphene-based phased array antenna system, interferometric star tracker, ultralow power fast-response sensor, and integrated spacecraft navigation and communication. Each featured technology describes an innovation, technical objective, and highlights NASA commercial and industrial applications. This report provides an opportunity for NASA engineers, researchers, and program managers to learn how NASA SBIR technologies could help their programs and projects, and lead to collaborations and partnerships between the small SBIR companies and NASA that would benefit both.

  11. ATLAS Supplier Award for the ECT Vacuum Vessels

    CERN Multimedia

    Jenni, P

    On 12 February the Netherlands firm Schelde Exotech was awarded the ATLAS Supplier Award for the construction of the two vacuum vessels for the ATLAS End- Cap Toroid (ECT) magnets. ATLAS Supplier Award ceremonies have now become something of a tradition. For the third consecutive year, ATLAS has given best supplier awards for the most exceptional contributors to the construction of the detector. The Netherlands firm Schelde Exotech has just received the award for the construction of the two vacuum vessels for the ECTs. With a diameter of 11 metres and a volume of 550 cubic metres, the ECT vacuum vessels are obviously impressive in scale. They consist of large aluminium plates and a stainless steel central bore tube. In order to obtain the required undulations, the firm had to develop a special assembly and welding technique. Despite the chambers' imposing size, a very high degree of precision has been achieved in their geometry. Moreover, the chambers, which were delivered in July 2002 to CERN, were built i...

  12. Technology verification phase. Dynamic isotope power system. Final report

    International Nuclear Information System (INIS)

    Halsey, D.G.

    1982-01-01

    The Phase I requirements of the Kilowatt Isotope Power System (KIPS) program were to make a detailed Flight System Conceptual Design (FSCD) for an isotope fueled organic Rankine cycle power system and to build and test a Ground Demonstration System (GDS) which simulated as closely as possible the operational characteristics of the FSCD. The activities and results of Phase II, the Technology Verification Phase, of the program are reported. The objectives of this phase were to increase system efficiency to 18.1% by component development, to demonstrate system reliability by a 5000 h endurance test and to update the flight system design. During Phase II, system performance was improved from 15.1% to 16.6%, an endurance test of 2000 h was performed while the flight design analysis was limited to a study of the General Purpose Heat Source, a study of the regenerator manufacturing technique and analysis of the hardness of the system to a laser threat. It was concluded from these tests that the GDS is basically prototypic of a flight design; all components necessary for satisfactory operation were demonstrated successfully at the system level; over 11,000 total h of operation without any component failure attested to the inherent reliability of this type of system; and some further development is required, specifically in the area of performance

  13. Technology verification phase. Dynamic isotope power system. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Halsey, D.G.

    1982-03-10

    The Phase I requirements of the Kilowatt Isotope Power System (KIPS) program were to make a detailed Flight System Conceptual Design (FSCD) for an isotope fueled organic Rankine cycle power system and to build and test a Ground Demonstration System (GDS) which simulated as closely as possible the operational characteristics of the FSCD. The activities and results of Phase II, the Technology Verification Phase, of the program are reported. The objectives of this phase were to increase system efficiency to 18.1% by component development, to demonstrate system reliability by a 5000 h endurance test and to update the flight system design. During Phase II, system performance was improved from 15.1% to 16.6%, an endurance test of 2000 h was performed while the flight design analysis was limited to a study of the General Purpose Heat Source, a study of the regenerator manufacturing technique and analysis of the hardness of the system to a laser threat. It was concluded from these tests that the GDS is basically prototypic of a flight design; all components necessary for satisfactory operation were demonstrated successfully at the system level; over 11,000 total h of operation without any component failure attested to the inherent reliability of this type of system; and some further development is required, specifically in the area of performance. (LCL)

  14. The Effect of Atropine on Post-ECT Bradycardia in Patients with Major Depressive Disorder

    Directory of Open Access Journals (Sweden)

    Hassan Farashbandi

    2014-08-01

    Full Text Available Background: Electroconvulsive therapy (ECT is utilized for treatment of a range of psychiatric disorders including major depressive disorder (MDD. One of the major complications in using ECT is cardiovascular problems i.e., bradycardia. The present study was designed to investigate the effect of atropine on the pulse rate (PR of the patients under treatment with ECT. Materials and Methods: In this randomized clinical trial, 30 patients with diagnosis of MDD who received atropine before ECT treatment (control group were compared with 30 patients with the same diagnosis without receiving atropine (experimental group under ECT treatment. Both groups received ECT under the same term and condition. The PR of the patients were recorded 7 times (twice before anesthesia and ECT and 5 fixed one min intervals immediately after receiving ECT; for 10 sessions of treatment with ECT (3 times a week. The results were analyzed using repeated measure analysis of variance. The PR under 50 was the cut off point for differentiating the patients suffering from bradycardia and those without it. Results: Slight increment in PRs for experimental group (patient who did not receive atropine in contrast to control group were observed, but it did not reach a statistically significant level. The gender (male/female did not have different PR. The age of the patients and initial PR (regarded as co-variances did not show significant effect on PR for total sample. Conclusion: There seems to be not necessary to use atropine treatment for depressed patients receiving ECT.

  15. The Role of Electroconvulsive Therapy (ECT) in Bipolar Disorder: Effectiveness in 522 Patients with Bipolar Depression, Mixed-state, Mania and Catatonic Features.

    Science.gov (United States)

    Perugi, Giulio; Medda, Pierpaolo; Toni, Cristina; Mariani, Michela Giorgi; Socci, Chiara; Mauri, Mauro

    2017-04-01

    We evaluated the effectiveness of Electroconvulsive Therapy (ECT) in the treatment of Bipolar Disorder (BD) in a large sample of bipolar patients with drug resistant depression, mania, mixed state and catatonic features. 522 consecutive patients with DSM-IV-TR BD were evaluated prior to and after the ECT course. Responders and nonresponders were compared in subsamples of depressed and mixed patients. Descriptive analyses were reported for patients with mania and with catatonic features. Of the original sample only 22 patients were excluded for the occurrence of side effects or consent withdrawal. After the ECT course, 344 (68.8%) patients were considered responders (final CGIi score ≤2) and 156 (31.2%) nonresponders. Response rates were respectively 68.1% for BD depression, 72.9% for mixed state, 75% for mania and 80.8% for catatonic features. Length of current episode and global severity of the illness were the only statistically significant predictors of nonresponse. ECT resulted to be an effective and safe treatment for all the phases of severe and drug-resistant BD. Positive response was observed in approximately two-thirds of the cases and in 80% of the catatonic patients. The duration of the current episode was the major predictor of nonresponse. The risk of ECT-induced mania is virtually absent and mood destabilization very unlikely. Our results clearly indicate that current algorithms for the treatment of depressive, mixed, manic and catatonic states should be modified and, at least for the most severe patients, ECT should not be considered as a "last resort".

  16. Reverse phase protein microarray technology in traumatic brain injury.

    Science.gov (United States)

    Gyorgy, Andrea B; Walker, John; Wingo, Dan; Eidelman, Ofer; Pollard, Harvey B; Molnar, Andras; Agoston, Denes V

    2010-09-30

    Antibody based, high throughput proteomics technology represents an exciting new approach in understanding the pathobiologies of complex disorders such as cancer, stroke and traumatic brain injury. Reverse phase protein microarray (RPPA) can complement the classical methods based on mass spectrometry as a high throughput validation and quantification method. RPPA technology can address problematic issues, such as sample complexity, sensitivity, quantification, reproducibility and throughput, which are currently associated with mass spectrometry-based approaches. However, there are technical challenges, predominantly associated with the selection and use of antibodies, preparation and representation of samples and with analyzing and quantifying primary RPPA data. Here we present ways to identify and overcome some of the current issues associated with RPPA. We believe that using stringent quality controls, improved bioinformatics analysis and interpretation of primary RPPA data, this method will significantly contribute in generating new level of understanding about complex disorders at the level of systems biology. Published by Elsevier B.V.

  17. Portable Computer Technology (PCT) Research and Development Program Phase 2

    Science.gov (United States)

    Castillo, Michael; McGuire, Kenyon; Sorgi, Alan

    1995-01-01

    The subject of this project report, focused on: (1) Design and development of two Advanced Portable Workstation 2 (APW 2) units. These units incorporate advanced technology features such as a low power Pentium processor, a high resolution color display, National Television Standards Committee (NTSC) video handling capabilities, a Personal Computer Memory Card International Association (PCMCIA) interface, and Small Computer System Interface (SCSI) and ethernet interfaces. (2) Use these units to integrate and demonstrate advanced wireless network and portable video capabilities. (3) Qualification of the APW 2 systems for use in specific experiments aboard the Mir Space Station. A major objective of the PCT Phase 2 program was to help guide future choices in computing platforms and techniques for meeting National Aeronautics and Space Administration (NASA) mission objectives. The focus being on the development of optimal configurations of computing hardware, software applications, and network technologies for use on NASA missions.

  18. The role of technology in reducing health care costs. Phase II and phase III.

    Energy Technology Data Exchange (ETDEWEB)

    Cilke, John F.; Parks, Raymond C.; Funkhouser, Donald Ray; Tebo, Michael A.; Murphy, Martin D.; Hightower, Marion Michael; Gallagher, Linda K.; Craft, Richard Layne, II; Garcia, Rudy John

    2004-04-01

    In Phase I of this project, reported in SAND97-1922, Sandia National Laboratories applied a systems approach to identifying innovative biomedical technologies with the potential to reduce U.S. health care delivery costs while maintaining care quality. The effort provided roadmaps for the development and integration of technology to meet perceived care delivery requirements and an economic analysis model for development of care pathway costs for two conditions: coronary artery disease (CAD) and benign prostatic hypertrophy (BPH). Phases II and III of this project, which are presented in this report, were directed at detailing the parameters of telemedicine that influence care delivery costs and quality. These results were used to identify and field test the communication, interoperability, and security capabilities needed for cost-effective, secure, and reliable health care via telemedicine.

  19. An Overview of SBIR Phase 2 Airbreathing Propulsion Technologies

    Science.gov (United States)

    Nguyen, Hung D.; Steele, Gynelle C.; Bitler, Dean W.

    2014-01-01

    Technological innovation is the overall focus of NASA's Small Business Innovation Research (SBIR) program. The program invests in the development of innovative concepts and technologies to help NASA's mission directorates address critical research and development needs for agency projects. This report highlights innovative SBIR Phase II projects from 2007-2012 specifically addressing areas in Airbreathing Propulsion which is one of six core competencies at NASA Glenn Research Center. There are twenty technologies featured with emphasis on a wide spectrum of applications such as with a Turbo-Brayton cryocooler for aircraft superconducting systems, braided composite rotorcraft structures, engine air brake, combustion control valve, flexible composite driveshaft, and much more. Each article in this booklet describes an innovation, technical objective, and highlights NASA commercial and industrial applications. This report serves as an opportunity for NASA personnel including engineers, researchers, and program managers to learn of NASA SBIR's capabilities that might be crosscutting into this technology area. As the result, it would cause collaborations and partnerships between the small companies and NASA Programs and Projects resulting in benefit to both SBIR companies and NASA.

  20. Follow-up study of memory deficits after ECT.

    Science.gov (United States)

    Shellenberger, W; Miller, M J; Small, I F; Milstein, V; Stout, J R

    1982-06-01

    Twenty-four patients received ECT induced by either alternating sine wave or brief pulsed-square wave stimulus and were evaluated at follow-up for clinical functioning and subjective memory loss. The hypothesis of less memory loss in the group receiving a weaker stimulus (pulsed-square wave) was not supported. The two treatment groups and a group of controls showed no significant differences on the memory test. On measures of clinical functioning the sine wave group scored better on every measure than the square wave group, although not significantly better.

  1. Decreased memory loss associated with right unilateral ultra-brief pulse wave ECT.

    Science.gov (United States)

    Kim, Suck Won; Grant, Jon E; Rittberg, Barry R; Simon, John E; Vine, Craig J; Schulz, S Charles

    2007-01-01

    The purpose of this brief article is to share with our colleagues in the psychiatric community and other physicians information about the efficacy of an emerging new method of electroconvulsive therapy (ECT) that shows advantages over existing treatments for depression. Patients treated with the method, ultra-brief pulse wave ECT, have less memory loss and confusion than those treated with longer-duration ECT.

  2. Project inspection using mobile technology - phase I : an investigation into existing business processes and areas for improvement using mobile technology.

    Science.gov (United States)

    2013-08-01

    As mobile technology becomes widely available and affordable, transportation agencies can use this technology to : streamline operations involved within project inspection. This research, conducted in two phases, identified : opportunities for proces...

  3. Detection and sizing of defects in structural components of a nuclear power plant by ECT

    International Nuclear Information System (INIS)

    Chen, Z.; Miya, K.

    2004-01-01

    In this paper, progress of ECT (eddy current testing) technique for inspection of stress corrosion cracks in a structural component of a nuclear power plant is reported. Access and scanning vehicle (robot), advanced probes for steam generator tube inspection, development and evaluation of new probes for welding joint, and ECT based crack sizing technique are described respectively. Based on these new techniques, it is clarified that ECT can play as a supplement of ultrasonic techniques for the welding zone inspection. It is also proved in this work that new ECT sensors are efficient even for a stainless plate as thick as 15 mm. (authors)

  4. Detection and Sizing of Defects in Structural Components of a Nuclear Power Plant by ECT

    International Nuclear Information System (INIS)

    Chen Zhenmao; Miya, Kenzo

    2005-01-01

    In this paper, progress of ECT technique for inspection of stress corrosion cracks in a structural component of a nuclear power plant is reported. Access and scanning vehicle (robot), advanced probes for SG tube inspection, development and evaluation of new probes for welding joint, and ECT based crack sizing technique are described respectively. Based on these new techniques, it is clarified that ECT can play as a supplement of UT for the welding zone inspection. It is also proved in this work that new ECT sensors are efficient even for a stainless plate as thick as 15mm

  5. Evaluation of ECT reliability for axial ODSCC in steam generator tubes

    International Nuclear Information System (INIS)

    Lee, Jae Bong; Park, Jai Hak; Kim, Hong Deok; Chung, Han Sub

    2010-01-01

    The integrity of steam generator tubes is usually evaluated based on eddy current test (ECT) results. Because detection capacity of the ECT is not perfect, all of the physical flaws, which actually exist in steam generator tubes, cannot be detected by ECT inspection. Therefore it is very important to analyze ECT reliability in the integrity assessment of steam generators. The reliability of an ECT inspection system is divided into reliability of inspection technique and reliability of quality of analyst. And the reliability of ECT results is also divided into reliability of size and reliability of detection. The reliability of ECT sizing is often characterized as a linear regression model relating true flaw size data to measured flaw size data. The reliability of detection is characterized in terms of probability of detection (POD), which is expressed as a function of flaw size. In this paper the reliability of an ECT inspection system is analyzed quantitatively. POD of the ECT inspection system for axial outside diameter stress corrosion cracks (ODSCC) in steam generator tubes is evaluated. Using a log-logistic regression model, POD is evaluated from hit (detection) and miss (no detection) binary data obtained from destructive and non-destructive inspections of cracked tubes. Crack length and crack depth are considered as variables in multivariate log-logistic regression and their effects on detection capacity are assessed using two-dimensional POD (2-D POD) surface. The reliability of detection is also analyzed using POD for inspection technique (POD T ) and POD for analyst (POD A ).

  6. Poly(ADP-ribosyl)ation is recognized by ECT2 during mitosis.

    Science.gov (United States)

    Li, Mo; Bian, Chunjing; Yu, Xiaochun

    2014-01-01

    Poly(ADP-ribosyl)ation is an unique posttranslational modification and required for spindle assembly and function during mitosis. However, the molecular mechanism of poly(ADP-ribose) (PAR) in mitosis remains elusive. Here, we show the evidence that PAR is recognized by ECT2, a key guanine nucleotide exchange factor in mitosis. The BRCT domain of ECT2 directly binds to PAR both in vitro and in vivo. We further found that α-tubulin is PARylated during mitosis. PARylation of α-tubulin is recognized by ECT2 and recruits ECT2 to mitotic spindle for completing mitosis. Taken together, our study reveals a novel mechanism by which PAR regulates mitosis.

  7. Design Technology Aspects of the Millimeter Waveband Phase Shifter Development

    Directory of Open Access Journals (Sweden)

    E. V. Komissarova

    2015-01-01

    Full Text Available The aim of this paper is to develop a technique, which takes into consideration the design technology aspects to create a waveguide ferrite Faradays’ phase shifter (WFFPS of the shortwave part of the millimeter wave range. Only using the calculation and analysis techniques based on the electro-dynamic high-level models for designed devices enables us to solve this task successfully.In assembling the WFFPS, its individual parts are connected by dint of glue (rod, yokes, dielectric transition transformers. Thus the layers of glue, possible air gaps, and misalignment of individual parts, obviously have effect on the WFFPS characteristics and should be taken into account at the stage of device calculation and design. Therefore, the aim is to analyze the impact of these technology features on the characteristics of WFFPS.The calculation algorithm of the waveguide transition, which matches WFFPS with the waveguide transmission line or integrated phased array antenna (PAA element radiator in view of possible air or adhesive gaps apparition is based on the solving problem of diffraction of electromagnetic waves. Eigenvalue problem solution by Galerkin method must be preceded to the electromagnetic waves diffraction on the stepped waveguide transition by method of partial areas (Trefftz method solution. As a result, a system of linear inhomogeneous equations is determined. Its solution is the basis for the algorithm to define the numerical values of complex amplitudes of waves excited in all longitudinally uniform areas with a laterally nonuniform ferritedielectric filling, into which splits the waveguide ferrite phase shifter.To take into account the effect of air or glue gap arising when assembling the phase shifter, a designed calculation model is added by the transition step from a material having the same dielectric constant as that of the material filling the gap. The paper presents numerical investigation findings concerning the influence of

  8. Inspection of austenitic welds with ultrasonic phased array technology

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, A.; Fernandez, F. [Tecnatom (Spain); Dutruc, R.; Ferriere, R. [Metalscan (France)

    2011-07-01

    This series of slides presents the use of ultrasonic phased array technology in the inspection of austenitic welds. The inspection from outside surface (the inspection is performed in contact using wedges to couple the probe to the outer surface of the component) shows that longitudinal wave is the most adequate for perpendicular scans and transversal ultrasonic wave is the most adequate for parallel scans. Detection and length sizing are performed optimally in perpendicular scans. The inspection from inside surface shows: -) Good results in the detection of defects (Sizing has met the requirements imposed by the Authority of the Russian Federation); -) The new design of the mechanical equipment and of the numerous ultrasonic beams refracted by the array probes has increased the volume inspected. The design of the mechanical equipment has also allowed new areas to be inspected (example a piping weld that was not accessible from the outer surface; -) The ultrasonic procedure and Inspection System developed have been validated by the Authority of the Russian Federation. Phase array technique supplies solutions to solve accessibility concerns and improve the ultrasonic inspections of nuclear components

  9. Effectiveness of the use of emission data by fan beam collimator for TCT on TCT/ECT simultaneous acquisition

    International Nuclear Information System (INIS)

    Takahashi, Yasuyuki; Nishimura, Yoshihiro; Murase, Kenya

    2003-01-01

    On transmission CT (TCT)/emission CT (ECT) simultaneous acquisition in the three detector SPECT system (one fan beam collimator for TCT and two parallel-hole collimators for ECT), count loss of the ECT data of the fan beam collimator for TCT occurs, which may deteriorate image quality. We thought that it might be possible to retrieve the ECT counts and improve image quality, when ECT data of the fan beam collimator for TCT were added to ECT data of two other parallel-hole collimators. To prove our hypothesis, we performed a phantom and clinical studies. We compared the ECT images of the following protocols: ECT data of a fan beam collimator+ECT data of two parallel beam collimators with attenuation correction (protocol A), ECT data of two parallel beam collimators with attenuation correction (protocol B), ECT data of two parallel beam collimators without attenuation correction (protocol C). In the phantom study, pixel counts of protocol A were as 1.3 to 1.6 times as protocol B. Profile curve improved up to 7 to 10%. Clinical images also improved. In conclusion, ECT data of the fan beam collimator for TCT can be retrieved to increase ECT counts, which improved image quality. (author)

  10. ECT: its brain enabling effects. A review of electroconvulsive therapy-induced structural brain plasticity

    NARCIS (Netherlands)

    Bouckaert, F.; Sienaert, P.; Obbels, J.; Dols, A.; Vandenbulcke, M.; Stek, M.L.; Bolwig, T.

    2014-01-01

    BACKGROUND: Since the past 2 decades, new evidence for brain plasticity has caused a shift in both preclinical and clinical ECT research from falsifying the "brain damage hypothesis" toward exploring ECT's enabling brain (neuro)plasticity effects. METHODS: By reviewing the available animal and human

  11. DIS[subscript 2]ECT: A Framework for Effective Inclusive Science Instruction

    Science.gov (United States)

    Spaulding, Lucinda S.; Flannagan, Jenny Sue

    2012-01-01

    The purpose of this article is to provide special education and general education teachers a framework (DIS[subscript 2]ECT) for teaching science in inclusive settings. DIS2ECT stands for Design (Backwards); Individualization; Scaffolding and Strategies; Experiential learning; Cooperative Learning; and Teamwork. This framework was derived from our…

  12. Treatment of Methamphetamine Dependence with Electroconvulsive Therapy (ECT in Iran: A Critical Note.

    Directory of Open Access Journals (Sweden)

    Babak Roshanaei-Moghaddam

    2014-09-01

    Full Text Available This comment article reviews the literature to explore whether the use of ECT for the treatment of methamphetamine dependence can be justified by scientific rationale and/or evidence.This article reviews the literature on the use of ECT in addictive disorders. It describes a patient with methamphetamine dependence treated with ECT. It then offers a historical review of the moral and ethical difficulties encountered in the treatment of addictive disorders. It proposes a dynamic understanding as to why clinicians might deploy such brutal actions in the face of hopeless and emotionally intense encounters.We found no scientific evidence or justification for ECT as a treatment of methamphetamine dependence or as the first line treatment for methamphetamine-induced psychiatric comorbidities.the current available evidence does not support using ECT for the treatment of addictive disorders, and hence is unethical, unacceptable and inhumane and warrants immediate social and political attention.

  13. Image Reconstruction Algorithm For Electrical Capacitance Tomography (ECT)

    International Nuclear Information System (INIS)

    Arko

    2001-01-01

    ). Most image reconstruction algorithms for electrical capacitance tomography (ECT) use sensitivity maps as weighting factors. The computation is fast, involving a simple multiply-and- accumulate (MAC) operation, but the resulting image suffers from blurring due to the soft-field effect of the sensor. This paper presents a low cost iterative method employing proportional thresholding, which improves image quality dramatically. The strategy for implementation, computational cost, and achievable speed is examined when using a personal computer (PC) and Digital Signal Processor (DSP). For PC implementation, Watcom C++ 10.6 and Visual C++ 5.0 compilers were used. The experimental results are compared to the images reconstructed by commercially available software. The new algorithm improves the image quality significantly at a cost of a few iterations. This technique can be readily exploited for online applications

  14. The Rossiter-McLaughlin effect for exoplanets

    Directory of Open Access Journals (Sweden)

    Winn J.N.

    2011-02-01

    Full Text Available There are now more than 30 stars with transiting planets for which the stellar obliquity—or more precisely its sky projection—has been measured, via the eponymous effect of Rossiter and McLaughlin. The history of these measurements is intriguing. For 8 years a case was gradually building that the orbits of hot Jupiters are always well-aligned with the rotation of their parent stars. Then in a sudden reversal, many misaligned systems were found, and it now seems that even retrograde systems are not uncommon. I review the measurement technique underlying these discoveries, the patterns that have emerged from the data, and the implications for theories of planet formation and migration.

  15. Preconditioned alternating projection algorithms for maximum a posteriori ECT reconstruction

    International Nuclear Information System (INIS)

    Krol, Andrzej; Li, Si; Shen, Lixin; Xu, Yuesheng

    2012-01-01

    We propose a preconditioned alternating projection algorithm (PAPA) for solving the maximum a posteriori (MAP) emission computed tomography (ECT) reconstruction problem. Specifically, we formulate the reconstruction problem as a constrained convex optimization problem with the total variation (TV) regularization. We then characterize the solution of the constrained convex optimization problem and show that it satisfies a system of fixed-point equations defined in terms of two proximity operators raised from the convex functions that define the TV-norm and the constraint involved in the problem. The characterization (of the solution) via the proximity operators that define two projection operators naturally leads to an alternating projection algorithm for finding the solution. For efficient numerical computation, we introduce to the alternating projection algorithm a preconditioning matrix (the EM-preconditioner) for the dense system matrix involved in the optimization problem. We prove theoretically convergence of the PAPA. In numerical experiments, performance of our algorithms, with an appropriately selected preconditioning matrix, is compared with performance of the conventional MAP expectation-maximization (MAP-EM) algorithm with TV regularizer (EM-TV) and that of the recently developed nested EM-TV algorithm for ECT reconstruction. Based on the numerical experiments performed in this work, we observe that the alternating projection algorithm with the EM-preconditioner outperforms significantly the EM-TV in all aspects including the convergence speed, the noise in the reconstructed images and the image quality. It also outperforms the nested EM-TV in the convergence speed while providing comparable image quality. (paper)

  16. Efek Electro Convulsive Therapy (ECT) terhadap Daya Ingat Pasien Skizofrenia di RSJ Prof. HB. Sa’anin Padang

    OpenAIRE

    Ikky Nabila Nandinanti; Yaslinda Yaunin; Siti Nurhajjah

    2015-01-01

    Abstrak  ECT merupakan terapi kejang listrik dengan menghantarkan arus listrik pada elektroda dan dipasang pada kepala sehingga menyebabkan konvulsi. ECT terbukti dapat memperbaiki gejala skizofrenia, namun ECT juga memiliki efek samping terutama pada daya ingat. Tujuan  penelitian ini adalah mengetahui efek ECT terhadap daya ingat pasien skizofrenia. Metode : Penelitian ini menggunakan desain analitik dengan jumlah sampel 15 orang penderita skizofrenia di Rumah Sakit Jiwa (RSJ) Prof. HB. Sa’...

  17. Signal Evaluation System of Flexible Array Ect Probes for Inspecting Complexly Shaped Surfaces

    Science.gov (United States)

    Endo, H.; Nishimizu, A.; Tooma, M.; Ouchi, H.; Yoshida, I.; Nonaka, Y.; Otani, K.

    2011-06-01

    We developed a signal evaluation system of flexible array eddy current testing (ECT) probes for inspecting complexly shaped metal surfaces. Our probes employ excitation and pickup coil pairs arrayed on a bendable substrate to measure curved targets. Since the developed probes produce signals due to the change in the relative position between the coil pair, an evaluation module for flaw signal identification is integrated into the system. The identification utilizes signal phase combination of the coil pairs. It is represented as a two-dimensional diagram constituting the phase values of two of the coil pairs with different positions. The phase of signals around flaws is significantly affected by their orientations. The diagram is therefore capable of separating flaw information from other information and of imaging flaw positions. We applied the system to complex geometric mock-ups. Flaw signals were successfully identified and the images obtained for identified positions could be used to efficiently measure the length of surface flaws by the 12 decibel down method.

  18. Electrochemically Modulated Gas/Liquid Separation Technology for In Situ Resource Utilization Process Streams, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — In this phase I program MicroCell Technologies, LLC (MCT) proposes to demonstrate the feasibility of an electrochemically modulated phase separator for in situ...

  19. Clinical and biological predictors of response to electroconvulsive therapy (ECT): a review.

    Science.gov (United States)

    Pinna, Martina; Manchia, Mirko; Oppo, Rossana; Scano, Filomena; Pillai, Gianluca; Loche, Anna Paola; Salis, Piergiorgio; Minnai, Gian Paolo

    2018-03-16

    Electroconvulsive therapy (ECT), developed in the 30's by Bini and Cerletti, remains a key element of the therapeutic armamentarium in psychiatry, particularly for severe and life-threatening psychiatric symptoms. However, despite its well-established clinical efficacy, the prescription of ECT has declined constantly over the years due to concerns over its safety (cognitive side effects) and an increasingly negative public perception. As for other treatments in the field of psychiatry, ECT is well suited to a personalized approach that would increment its efficacy, as well as reducing the impact of side effects. This should be based on the priori identification of sub-populations of patients sharing common clinical and biological features that predict a good response to ECT. In this review we have selectively reviewed the evidence on clinical and biological predictors of ECT response. Clinical features such as an older age, presence of psychotic and melancholic depression, a high severity of suicide behavior, and speed of response, appear to be shared by ECT good responders with depressive symptoms. In mania, a greater severity of the index episode, and a reduction of whole brain cortical blood flow are associated with ECT good response. Biological determinants of ECT response in depressive patients are the presence of pre-treatment hyperconnectivity between key areas of brain circuitry of depression, as well as of reduced glutamine/glutamate levels, particularly in the anterior cingulated cortex (ACC). Furthermore, pre ECT high plasma homovanillic acid (HVA) levels, as well as of tumor necrosis factor (TNF)-α, and low pre-ECT levels of S-100B protein, appear to predict ECT response. Finally, polymorphisms within the genes encoding for the brain-derived neurotrophic factor (BDNF), the dopamine 2 receptor gene (DRD2), the dopamine receptor 3 gene (DRD3), the cathechol-o-methyltransferase (COMT), the serotonin-transporter (5-HTT), the 5-hydroxytryptamine 2A receptor

  20. I was told it restarts your brain: knowledge, power, and women's experiences of ECT.

    Science.gov (United States)

    Ejaredar, Maede; Hagen, Brad

    2014-02-01

    A discrepancy exists between clinician-led studies of people's experience of electroconvulsive therapy (ECT) and consumer-led studies, with the former typically being much more positive about the efficacy and side effects of ECT compared with the latter. Qualitative in-depth explorations of people's experiences of ECT are relatively rare, particularly those looking specifically at women's experience of ECT. The aim of this qualitative study was to explore women's experiences of ECT, particularly their experience of knowledge and power related to ECT. Qualitative analysis of the interviews with nine women resulted in four main themes emerging from the interviews with the women: (i) "he really didn't say much," (ii) "I'm going to be very upset with you," (iii) "I was just desperate," and (iv) "it was like we were cattle." Overall, participants found their experiences with ECT to be quite negative, and characterized by a lack of knowledge during the procedure, and a lack of power throughout the entire process.

  1. All I have is a void: women's perceptions of the benefits and side effects of ECT.

    Science.gov (United States)

    Ejaredar, Maede; Hagen, Brad

    2013-01-01

    Recent reviews of the benefits and risks associated with electroconvulsive therapy (ECT) have often reported mixed and conflicting results. Although there are very few qualitative studies on ECT, qualitative research offers the advantage of in-depth explorations into how people perceive and experience ECT. The objective of this qualitative study was to explore women's experiences and perceptions of the benefits and side effects associated with having ECT. The authors used narrative inquiry and in-depth interviews to obtain nine women's accounts and stories of ECT, focusing particularly on their accounts of perceived benefits and side effects associated with ECT. Qualitative thematic analysis of the interviews with nine women resulted in four main themes emerging from the interviews: "it's sort of like housecleaning," "I don't remember the wedding," made me stupider," and "putting them in a cage with a bear." Three of the women were able to articulate some perceived benefit arising from ECT, although these women also acknowledged the benefits did not last more than two weeks. The majority of women complained of significant and persistent autobiographical memory loss, cognitive deficits, and fear of the procedure.

  2. An Analysis of Design Characteristics of ECT Bobbin Probe for S/G Tube

    International Nuclear Information System (INIS)

    Nam, Min-Woo; Cho, Chan-Hee; Jee, Dong-Hyun; Jung, Jee-Hong; Lee, Hee-Jong

    2006-01-01

    The bobbin probe technique is basically one of the important ECT methods for the steam generator tube integrity assessment that is practiced during each plant outage. The bobbin probe is one of the essential components which consist of the whole ECT examination system, and provides us a decisive data for the evaluation of tube integrity in compliance with acceptance criteria described in specific procedures. The selection of examination probe is especially important because the quality of acquired ECT data is determined by the probe design characteristics, geometry and operation frequencies, and has an important effect on examination results. In this study, the relationship between electric characteristic changes and differential coil gap variation has been investigated to optimize the ECT signal characteristics of the bobbin probe. With the results from this study, we have elucidated that the optimum coil gap is 1.2 - 1.6mm that give the best result for O.D. volumetric defects in ASME calibration standards

  3. The European credit transfer system (ECTS): Introduction and practical experience at the Technical University of Denmark

    DEFF Research Database (Denmark)

    Larsen, Bo Skjold

    2000-01-01

    The objectives and the core elements of the European Course Credit Transfer System (ECTS) are briefly described. ECTS is a tool to manage student mobility as it facilitates transparency, academic recognition, and commitment of the student and involved institutions. The impact on student mobility...... and teaching after implementation of ECTS at the Technical University of Denmark (DTU) is reported. The ratio of guest students attending advanced environmental engineering courses at DTU increased from 7 percent of class to almost 50 percent over a three-year period. The number of DTU students studying abroad...... was also affected by the implementation of ECTS in combination with DTU’s additional internationalisation activities. In 1998 DTU achieved balance between the inflow and outflow of students....

  4. Severe agitation in severe early-onset Alzheimer’s disease resolves with ECT

    Directory of Open Access Journals (Sweden)

    Aksay SS

    2014-11-01

    Full Text Available Suna Su Aksay, Lucrezia Hausner, Lutz Frölich, Alexander Sartorius Department of Psychiatry and Psychotherapy, Central Institute of Mental Health, Medical Faculty Mannheim, Heidelberg University, Mannheim, Germany Abstract: Dementia-related behavioral disturbances are mostly treated with antipsychotics; however, the observed beneficial effects are modest and the risk of serious adverse effects high. We report the case of a 57-year-old woman with severe early-onset Alzheimer’s disease and severe agitation, whom we treated with electroconvulsive therapy (ECT. A significant clinical improvement was achieved over eight ECT sessions, which were tolerated well without cognitive worsening, and lasted approximately 3 months. Our case demonstrates the safe and effective use of ECT in pharmacotherapy-resistant severe agitation in Alzheimer’s disease. The risk–benefit profile of ECT for dementia-related agitation should be further investigated in clinical trials. Keywords: dementia, electroconvulsive therapy, cognition, emotional distress, disinhibition.

  5. Reduction of post-ECT memory complaints through brief, partial restricted environmental stimulation (REST).

    Science.gov (United States)

    Suedfeld, P; Ramirez, C E; Remick, R A; Fleming, J A

    1989-01-01

    1. A previous paper (Suedfeld, et al. 1987) reported on preliminary results of placing patients into a room with substantially reduced environmental stimulation (REST) immediately after recovery from ECT. 2. Comparing two depressed patients who had undergone this experience with three who had instead returned to their own hospital room (Ward), Suedfeld et al. (1987) found that the former registered much fewer complaints concerning memory loss related to ECT administration than the latter. 3. The current report extends this finding to a total of 19 patients, of whom 13 completed four testing sessions. Once again, objective tests of memory showed no significant change as a function of ECT. Both groups of patients complained of substantial memory disruption after the first ECT. By the one-week follow-up, such complaints were minimal among REST patients but showed only a slight decline among the Ward group. This was the only significant intergroup difference.

  6. Efek Electro Convulsive Therapy (ECT terhadap Daya Ingat Pasien Skizofrenia di RSJ Prof. HB. Sa’anin Padang

    Directory of Open Access Journals (Sweden)

    Ikky Nabila Nandinanti

    2015-09-01

    Full Text Available Abstrak  ECT merupakan terapi kejang listrik dengan menghantarkan arus listrik pada elektroda dan dipasang pada kepala sehingga menyebabkan konvulsi. ECT terbukti dapat memperbaiki gejala skizofrenia, namun ECT juga memiliki efek samping terutama pada daya ingat. Tujuan  penelitian ini adalah mengetahui efek ECT terhadap daya ingat pasien skizofrenia. Metode : Penelitian ini menggunakan desain analitik dengan jumlah sampel 15 orang penderita skizofrenia di Rumah Sakit Jiwa (RSJ Prof. HB. Sa’anin Padang dengan teknik pengambilan consecutive sampling.Pemeriksaan daya ingat menggunakan Tes Memori Indonesia, dilakukan sehari sebelum ECT dan 2 jam sesudah ECT. Analisis data dengan uji T berpasangan. Gangguan daya ingat sebelum ECT terjadi pada 90% sampel dengan terganggu sedang pada kemampuan immediate memory, terganggu ringan pada kemampuan recent memory, dan terganggu berat pada remote memory. Gangguan daya ingat sesudah ECT terjadi pada seluruh sampel (100% dengan terganggu sedang pada immediate memory, terganggu berat pada recent memory, dan terganggu berat padaremote memory. Uji hipotesis pada nilai kemampuan immediate dan recent memory menghasilkan nilai p 0,018 dan 0,031 (p < 0,05, berarti Ho ditolak, sedangkan nilai p remote memory 0,678 (p > 0,05, berarti Ho diterima. Kesimpulan adalah perbedaan daya ingat immediate dan recent memory pada pasien skizofrenia sebelum dan sesudah ECT, sedangkan kemampuan remote memory tidak mengalami perubahan.Kata kunci: skizofrenia, ECT, daya ingat Abstract ECT is an electric convulsive therapy by delivering electrical current to electrodes and mounted on the head causing convulsions. ECT shown to improve schizophrenia symptoms, but ECT also has side effects especially on memory. The objective of this study was to determine the effects of ECT on memory schizophrenic patients. Current study was conducted with analytic design with sample size was 15 schizophrenia people at RSJ Prof. HB. Sa'anin Padang

  7. Based on a True Story? The Portrayal of ECT in International Movies and Television Programs.

    Science.gov (United States)

    Sienaert, Pascal

    Movies and television (TV) programs are an important source of public information about ECT. To narratively review the portrayal of ECT in international movies and TV programs from 1948 until present. Several Internet movie databases and a database of phrases appearing in movies and TV programs were searched, supplemented with a Medline-search. No language restrictions were applied. ECT was portrayed in 52 movies (57 scenes), 21 TV programs (23 scenes), and 2 animated sitcoms (2 scenes). In movies, the main indication for ECT is behavioral control or torture (17/57, 29.8%), whereas in TV programs, the most frequent indication is erasing memories (7/25, 28%). In most scenes (47/82; 57.3%) ECT is given without consent, and without anesthesia (59/82; 72%). Unmodified ECT is depicted more frequently in American scenes (48/64, 75%), as opposed to scenes from other countries (11/18; 64.7%). Bilateral electrode placement is used in almost all (89%, 73/82) scenes. The vast majority of movies (46/57, 80.7%) and TV programs (18/25, 72%) show a negative and inaccurate image of the treatment. In the majority of scenes, ECT is used as a metaphor for repression, mind and behavior control, and is shown as a memory-erasing, painful and damaging treatment, adding to the stigma already associated with ECT. Only a few exceptions paint a truthful picture of this indispensable treatment in modern psychiatry. Copyright © 2016 Elsevier Inc. All rights reserved.

  8. I’m shocked: informed consent in ECT and the phenomenological-self

    OpenAIRE

    Seniuk, Patrick

    2018-01-01

    This paper argues that phenomenological insights regarding selfhood are relevant to the informed consent process in the treatment of depression using electro-convulsive therapy (ECT). One of the most significant side-effects associated with ECT is retrograde amnesia. Unfortunately, the current informed consent model does not adequately appreciate the full extent in which memory loss disturbs lived-experience. Through the philosophy of Merleau-Ponty, it is possible to appreciate the way in whi...

  9. Autobiographical Memory and ECT: Don’t Throw Out the Baby

    OpenAIRE

    Sackeim, Harold A.

    2014-01-01

    Retrograde amnesia for autobiographical information is the most critical side effect of ECT. Much, if not most, modern research demonstrating long-term autobiographical amnesia following ECT has used either the Columbia University Autobiographical Memory Interview (CUAMI) or the short form of this scale (CUAMI-SF). Semkovska and McLoughlin claimed that studies using these instruments should be dismissed and the findings ignored due to a lack of normative data, as well as concerns about the re...

  10. Technology needs for the later phases of an oil spill

    Energy Technology Data Exchange (ETDEWEB)

    Goodman, R. [Innovative Ventures Ltd., Cochrane, AB (Canada)

    2007-07-01

    The phases of an oil spill response can be classified as initial response, project phase, end phase and the monitoring phase. The initial on-water phase of the response or shoreline cleanup includes the development of contingency planning, stockpiling of equipment and research into response equipment for removing oil on water. Lack of planning for a response can lead to an initial response that has less than satisfactory results. An initial assessment of the oil spill response begins at the moment the spill occurs and continues for days, depending on the quality of the initial response. This phase includes the use of booms, skimmers, dispersants and in-situ burning. It was emphasized that oil spill research should focus on gathering scientific information needed to make decisions during the project phase and beyond. Typically, this will involve the study of long-term impacts and should be undertaken in a research environment in order to apply new data to any spill scenario. This paper highlighted knowledge needs to support decisions in the cleanup phase. The Exxon Valdez incident provided information on the long-term impacts of a variety of cleanup techniques. This paper also addressed damage assessment and restoration issues along with the decision to terminate a response. Once a response has been terminated, long-term monitoring of the ecosystem begins in order to identify the spill impact. 9 refs., 6 figs.

  11. Advanced Technology MEMS-based Acoustic Array, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The Interdisciplinary Consulting Corporation proposes a technological advancement of current state-of-the-art acoustic energy harvester for harsh environment...

  12. Maintained improvement in neurocognitive function in major depressive disorders 6 months after ECT

    Directory of Open Access Journals (Sweden)

    Christine Mohn

    2016-12-01

    Full Text Available Both impaired and improved cognitive function after electroconvulsive treatment (ECT in major depressive disorder (MDD patients may occur. We have previously found improved cognitive function 6 weeks after ECT in this group. The aim of this study was to report 6-month follow-up results from the same prospective project monitoring cognitive effects of ECT. Thirty-one patients with major depressive disorder were assessed with the MATRICS Consensus Cognitive Battery (MCCB, the Everyday Memory Questionnaire (EMQ, and the Montgomery-Åsberg Depression Rating Scale (MADRS prior to, 6 weeks, and 6 months after ECT.Compared to baseline, the Speed of Processing, Attention/Vigilance, and Reasoning/Problem Solving test results were significantly improved. The depression score was significantly reduced. There were no changes in subjective memory complaint. There were no significant relationship between the EMQ and the MCCB subtests, but a significant correlation between current depression level and the EMQ.Six months after ECT the cognitive improvement reported at 6 weeks follow-up was maintained and extended. The corresponding decrease in depressive symptoms and stability in subjectively reported memory complaints suggests that the antidepressant effects of ECT do not occur at the expense of cognitive function.

  13. The effects of unilateral and bilateral ECT on verbal and visual spatial memory.

    Science.gov (United States)

    Jackson, B

    1978-01-01

    Investigated the effects of unilateral left (UL), unilateral right (UR), and bilateral (B) ECT on the performance of right-handed male patients on the Wechsler Memory Scale and two tests of the Williams battery, which provided eight independent measures of verbal memory and two of visual-spatial memory. Patients were tested three times: (1) within 1 week prior to ECT; (2) within 30 minutes after the sixth ECT; (3) 10 days after the sixty ECT. Double blind procedures were maintained carefully. Results showed a significant loss on second testing followed by a significant improvement 10 days later for all ECT groups compared with matched controls. There was some tendency for the UR group to show the least impairment on verbal measures and the UL group to show the least impairment on visual-spatial memory test of the WMS, but most of the differences between UL and UR groups and between each of these and the B group were not significant. The most sensitive test in differentiating among the ECT groups was the brief Verbal Learning subtest of the Williams battery.

  14. Environmental control technology

    International Nuclear Information System (INIS)

    Anon.

    1985-01-01

    During this report period, Chem Tech identified environmental control technology (ECT) as an area of emphasis for future planning and resource allocation. The Division plans to continue to perform R and D activities in ECT for external sponsors such as the DOE Office of Fossil Energy (DOE/FE), the Electric Power Research Institute (EPRI), and the Environmental Protection Agency (EPA) while striving for recognition as an R and D center for ECT within the Martin Marietta Energy Systems' Complex. Chem Tech has already played supporting roles in this area for the Y-12 Plant and the Oak Ridge Gaseous Diffusion Plant (ORGDP) and is currently expanding its support to organizations within ORNL responsible for environmental matters. Over the long term, the Division hopes to achieve recognition as a center for R and D in ECT within the wider DOE system. Recent initiatives supporting these plans are discussed below

  15. System technology analysis of aeroassisted orbital transfer vehicles: Moderate lift/drag (0.75-1.5). Volume 2: Supporting research and technology report, phase 1 and 2

    Science.gov (United States)

    1985-01-01

    Technology payoffs of representative ground based (Phase 1) and space based (Phase 2) mid lift/drag ratio (L/D) aeroassisted orbit transfer vehicles (AOTV) were assessed and prioritized. The methodology employed to generate technology payoffs, the major payoffs identified, the urgency of the technology effort required, and the technology plans suggested are summarized for both study phases. Technology issues concerning aerodynamics, aerothermodynamics, thermal protection, propulsion, and guidance, navigation and control are addressed.

  16. Advanced Technology Cloud Particle Probe for UAS, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — In Phase II SPEC will design, fabricate and flight test a state-of-the-art combined cloud particle probe called the Hawkeye. Hawkeye is the culmination of two...

  17. Erosion Resistant Compressor Blade Repair Technologies, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — This Phase I SBIR program will demonstrate the use of wear resistant high strength nanocomposites in the turbine engine repair and refurbishment process. The...

  18. Novel Process Technologies for Disinfection of Potable Water, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — KWJ is proposing a microfabricated multichannel ozone source, and will evaluate several designs for efficiency of ozone production in Phase I. The voltage...

  19. Slot Coupled Patch Array Antenna Technology, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed project is an antenna array whose beam is controlled digitally. The Phase 1 effort will assess the method needed to achieve the gain, bandwidth, and...

  20. Multi-layer Far-Infrared Component Technology, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — This Phase I SBIR will demonstrate the feasibility of a process to create multi-layer thin-film optics for the far-infrared/sub-millimeter wave spectral region. The...

  1. Global Air Mobility Advanced Technologies (GAMAT) Advanced Technology Development (ATD) Phase II Research and Development

    National Research Council Canada - National Science Library

    Kuper, Samuel R; Scott, Ronald; Kazmierczak, Thomas; Roth, Emilie; Whitaker, Randall

    2004-01-01

    ...) Advanced Technology Development (ATD) research and development program. The goal of the GAMAT ATD was to further the development of a new type of user interface technology called Work-Centered Support System (WCSS) technology. The U.S...

  2. Nano-Phase Powder Based Exothermic Braze Repair Technology For RCC Materials, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — The Phase II project will advance innovative, cost effective and reliable nano-phase exothermic RCC joining processes (ExoBrazeTM) in order to be able to reinforce...

  3. Electroconvulsive therapy (ECT) for treating agitation in dementia (major neurocognitive disorder) - a promising option.

    Science.gov (United States)

    Glass, Oliver M; Forester, Brent P; Hermida, Adriana P

    2017-05-01

    Agitation in patients with dementia increases caretaker burden, increases healthcare costs, and worsens the patient's quality of life. Antipsychotic medications, commonly used for the treatment of agitation in patients with dementia have a box warning from the FDA for elevated mortality risk. Electroconvulsive therapy (ECT) has made significant advances over the past several years, and is efficacious in treating a wide range of psychiatric conditions. We provide a systematic review of published literature regarding the efficacy of ECT for the treatment of agitation in patients with dementia (major neurocognitive disorder). We searched PubMed, Medline, Google Scholar, UptoDate, Embase, and Cochrane for literature concerning ECT for treating agitation in dementia using the title search terms "ECT agitation dementia;" "ECT aggression dementia;" "ECT Behavior and Psychological Symptoms of Dementia;" and "ECT BPSD." The term "dementia" was also interchanged with "Major Neurocognitive Disorder." No time frame restriction was placed. We attempted to include all publications that were found to ensure a comprehensive review. We found 11 papers, with a total (N) of 216 patients. Limited to case reports, case series, retrospective chart review, retrospective case-control, and an open label prospective study, ECT has demonstrated promising results in decreasing agitation in patients with dementia. Patients who relapsed were found to benefit from maintenance ECT. Available studies are often limited by concomitant psychotropic medications, inconsistent use of objective rating scales, short follow-up, lack of a control group, small sample sizes, and publication bias. A future randomized controlled trial will pose ethical and methodological challenges. A randomized controlled trial must carefully consider the definition of usual care as a comparison group. Well-documented prospective studies and/or additional case series with explicit selection criteria, a wide range of outcome

  4. A Novel Cleaning Technology for Spacecraft Habitat, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — There is currently no space based laundry technology. Traditional laundry uses a large amount of surfactants, which results in a substantial organic contaminant...

  5. Prototype-Technology Evaluator and Research Aircraft, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — The Area-I team has developed and flight tested the unmanned Prototype-Technology Evaluation and Research Aircraft or PTERA ("ptera" being Greek for wing, or...

  6. Automated Service Discovery using Autonomous Control Technologies, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — With the advent of mobile commerce technologies, the realization of pervasive computing and the formation of ad-hoc networks can be leveraged to the benefit of the...

  7. Lightweight Pump Technology for Advanced Green Monopropellants, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Systima will develop an innovative light weight self-pressurizing pump (SPP) technology to provide a constant-pressure supply of monopropellant to a spacecraft or...

  8. Low-Cost, Scalable, Hybrid Launch Propulsion Technology, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Physical Sciences Inc. (PSI), in collaboration Purdue University, proposes to develop a novel launch propulsion technology for rapid insertion of nano/micro...

  9. Robust microfabricated interconnect technologies: DC to THz, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — In recent years, Nuvotronics has developed state-of-the art antenna array and SSPA technologies at microwave and mmW frequencies with NASA funding through the SBIR...

  10. Health-Enabled Smart Sensor Fusion Technology, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — It has been proven that the combination of smart sensors with embedded metadata and wireless technologies present real opportunities for significant improvements in...

  11. Hawaii Energy and Environmental Technologies (HEET) Initiative Phase 4

    Science.gov (United States)

    2006-08-01

    Yardney Technical Products, Inc. "Sec 10 Li-ion Battery Technology - Secondary Cells," 2003 Battery Technology Workshop [061005 UUVFCEPSReportRev4.doc...an FCEPS has the potential to significantly increase the energy storage in a UUV, compared with battery -based propulsion systems. In support of...Unmanned Underwater Vehicles (UUVs) are primarily run with battery power systems, a Fuel Cell Energy/Power System (FCEPS) could be used and has

  12. Technology Transfer at Edgar Mine: Phase 1; October 2016

    Energy Technology Data Exchange (ETDEWEB)

    Augustine, Chad R. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Bauer, Stephen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Nakagawa, Masami [Colorado School of Mines, Golden, CO (United States); Zhou, Wendy [Colorado School of Mines, Golden, CO (United States)

    2017-09-14

    The objective of this project is to study the flow of fluid through the fractures and to characterize the efficiency of heat extraction (heat transfer) from the test rock mass in the Edgar Mine, managed by Colorado School of Mines in Idaho Springs, CO. The experiment consists of drilling into the wall of the mine and fracturing the rock, characterizing the size and nature of the fracture network, circulating fluid through the network, and measuring the efficiency of heat extraction from the 'reservoir' by monitoring the temperature of the 'produced' fluid with time. This is a multi-year project performed as a collaboration between the National Renewable Energy Laboratory, Colorado School of Mines and Sandia National Laboratories and carried out in phases. This report summarizes Phase 1: Selection and characterization of the location for the experiment, and outlines the steps for Phase 2: Circulation Experiments.

  13. The Savannah River Environmental Technology Field Test Platform: Phase 2

    International Nuclear Information System (INIS)

    Rossabi, J.; Riha, B.D.; Eddy-Dilek, C.A.; Pemberton, B.E.; May, C.P.; Jarosch, T.R.; Looney, B.B.; Raymond, R.

    1995-01-01

    The principal goal in the development of new technologies for environmental monitoring and characterization is transferring them to organizations and individuals for use in site assessment and compliance monitoring. The DOE complex has devised several strategies to facilitate this transfer including joint research projects between private industries and government laboratories or universities (CRADAs) and streamlined licensing procedures. One strategy that has been under-utilized is a planned sequence gradually moving from laboratory development and field demonstration to long term evaluation and onsite use. Industrial partnership and commercial production can be initiated at any step based on the performance, market, user needs, and costs associated with the technology. This approach allows use of the technology by onsite groups for compliance monitoring tasks (e.g. Environmental Restoration and Waste Management), while following parallel research and development organizations the opportunity to evaluate the long term performance and to make modifications or improvements to the technology. This probationary period also provides regulatory organizations, potential industrial partners, and potential users with the opportunity to evaluate the technology's performance and its utility for implementation in environmental characterization and monitoring programs

  14. Phase Change Permeation Technology for Environmental Control & Life Support Systems Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This project will explore a recent advancement in Phase Change Permeation™ technology to enable improved (1) water recovery from urine/brine for Environmental...

  15. A New Approach to Commercialization of NASA's Human Research Program Technologies, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — This Phase I SBIR proposal describes, "A New Approach to Commercialization of NASA's Human Research Program Technologies." NASA has a powerful research program that...

  16. Efficency of mobile authentication service technology on phase 1 ...

    African Journals Online (AJOL)

    Objectives: This study investigated the presence of MAS codes on medicines mandated by NAFDAC to have the code and a preliminary assessment of MAS ... drug market still do not have MAS technology inscribed on them and efficiency of Mobile Authentication Service is directly a function of the competence of the service ...

  17. TTI Phase 2 Institutional Support: Science, Technology and ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    STIPRO's mission is to improve human capacity in science, technology and innovation (STI) policy research. It also aims to raise awareness among government officials and parliamentarians of the critical role of this research for evidence-based STI policies. Its research program focuses on linking food security, agricultural ...

  18. Early phase Technology Assessment of Nanotechnology in Oncology

    NARCIS (Netherlands)

    Retel, Valesca; Retèl, Valesca P.; Hummel, J. Marjan; van Harten, Willem H.

    2008-01-01

    To perform early Technology Assessment (TA) of nanotechnology in oncology. The possibilities of nanotechnology for detection (imaging), diagnosis and treatment of cancer are subject of different research programs where major investments are concerned. As a range of bio- nanotechnologies is expected

  19. The clonic phase of seizures in patients treated with electroconvulsive therapy is related to age and stimulus intensity

    Directory of Open Access Journals (Sweden)

    Chih-Chieh eTseng

    2013-12-01

    Full Text Available Background: Electroconvulsive therapy (ECT is effective in the treatment of major depressive disorder and schizophrenia in patients who are drug-naïve or less-receptive to antipsychotic drugs. Several studies have discussed the correlation between patient characteristics, input current volume and seizure duration. According to the present principle of ECT guidelines, the therapeutic effect of ECT mostly correlates with seizure duration. As the tonic phase is different from the clonic phase with respect to brain function and activity, it is informative to analyse both the tonic and clonic phases. Thus, this study sought to clarify the relationship between the features of the two phases, and to re-examine and refine guidelines regarding ECT treatment.Method: ECT-course data from 44 schizophrenia patients were recollected, including the number of treatments that they had received, their gender, age, and the association of these characteristics with motor seizure duration was analysed. A two-factor correlation was employed to test the relationship between each of the two factors.Result: The meta-analysis results indicate that seizure duration and age are significantly correlated. Older patients had relatively short seizure durations after ECT-treatment. Notably, a negative correlation was only found between age and the clonic phase of the seizure, not between age and the tonic phase. Furthermore, this study also found an inverse relationship between ECT-intensity and the clonic phase, but not between ECT-intensity and the tonic phase.Conclusion: This study demonstrated that age and ECT-intensity are negatively correlated with seizure duration, particularly in the clonic phase. The present observations are not fully consistent with the basic guidelines of the APA-ECT practical manual. Accordingly, the predictions regarding the therapeutic effect of ECT can be based on both the seizure duration and the clonic phase.

  20. Fish tracking technology development. Phase 1 project definition desk study

    OpenAIRE

    Moore, A; Potter, E.C.E.

    1994-01-01

    The document reports on Phase 1 of a definition study to appraise the options to develop fish tracking equipment, in particular tags and data logging systems in order to improve the efficiency of the Environment Agency's tracking studies and to obtain a greater understanding of fish biology. Covered in this report are radio telemetry, audio telemetry, High Resolution Position Fixing, data storage and archival tags and other fish tracking systems such as biosonics.

  1. Inflatable TORUS Solar Array Technology Program. Phase 2.

    Science.gov (United States)

    1994-01-01

    allowing large leak paths. Numerous laminate combinations were fabricated and tested in Phase I, including three different alloys of aluminum ( 5052 -0, 1145-0... aluminum . Reference 8 also states that lower strength materials perform better in fatigue loading situations than the high strength alloys . By...of the ultimate tensile stress. For aluminum alloy 2024-T4: 68 0. 060 Figure 46. Diaphragm cross-section. Value Yield stress (psi) 47000 Yield

  2. Predicting effects and risk of relapse into depression: The Danish ECT/MRI project

    DEFF Research Database (Denmark)

    Gbyl, Krzysztof; Rosenberg, Raben; Larsson, Henrik Bo Wiberg

    Formål: Vi ønsker at undersøge hjernen hos patienter med svær depression før og efter elektrokonvulsiv terapi (ECT), samt ved en kontrol efter 6 måneder med det formål at: 1. undersøge hjernevævet så en evt. skadelig effekt af ECT-behandling kan udelukkes 2. belyse mekanismerne bag ECT for at finde...... prædiktorer for gunstige resultater, tidligt tilbagefald og for bivirkninger 3. undersøge omfanget af og baggrunden for påvirkningen af hukommelsesfunktionen Metode: I studiet planlægger vi at undersøge 60 patienter henvist til ECT på Psykiatrisk Center Glostrup, Amager og København pga. svær depression....... Desuden vha. den mest moderne MR-teknik at belyse om ECT kan skade hjernevævet. De nævnte prædiktorer vil muliggøre at behandlingen af de sværeste depressioner vil kunne forbedres og individualiseres i langt højere end i dag, hvorved sygdomsprognosen kan forbedres betydeligt. Vi forventer yderligere...

  3. ECT DAMAGE INDICATES STM DIVIDED INTO STM CONTROL & LTM TRACES: NEUROLOGICAL DEFINITION OF “CONFUSION”

    Directory of Open Access Journals (Sweden)

    Eugen Tarnow

    2017-12-01

    Full Text Available Recently it was shown that short term memory (STM free recall consists of two stages: the first few recalls empty working memory and a second stage, a reactivation stage, concludes the recall (Tarnow, 2015; for a review of the theoretical predictions see Murdock, 1974. Bayley et al (2000 investigated free recall in people who had undergone Electroconvulsive therapy (ECT and found that both recency and primacy effects were normal. Here I investigate this further, and argue that this finding suggests a division of STM between STM Control and long term memory (LTM traces and that STM Control is not effected by ECT.Serial position probabilities from an investigation of Bayley et al (2000 were used to compare 11 subjects with ECT treatments to a control group and to a group of Alzheimer’s subjects.The free recall probabilities are found to be separable into the serial position curves and the overall probability of recall. This suggests that STM is separable into an STM Control structure (the serial position curve responsible for working memory and reactivation functions and LTM traces (the overall probability of recall.Using the ECT review of Abbott et al (2014a showing excess activity in MTL and lacking activity in the frontal lobes I suggest that STM Control is overworked trying to establish stable patterns in LTM. It could be that the confusion resulting from ECT is due to the failure of this process, suggesting a neurological definition of confusion.

  4. Analysis of physiological (pao/sub 2/, pulse and blood pressure) changes during modified ect under general anaesthesia

    International Nuclear Information System (INIS)

    Shah, M.; Shah, H.A.; Shah, F.S.

    2015-01-01

    To study the changes in physiological parameters i e PAO2, pulse and blood pressure changes during ECT under GA. Study Design: Quasi-experimental study. Place and Duration of Study: Department of Psychiatry and Department of Anaesthesiology, Combined Military Hospital Abbottabad from Sep 2009 to Feb 2010. Patients and Methods: A total of 50 patients with depression were given four separate ECT sessions each. All patients were anaesthetized using propofol 180-200 mg I/V and suxamethonium 50 mg i e 0.75-1 mg per kg I/V without atropine. They were stratified according to physiological changes including PAO2, pulse and blood pressure at 1, 2 and 5 min after ECT. Oxygen saturation was measured using a pulse oximeter, which measures saturations in the range of 65-100%. Results: Age range was 19-65 years; mean 46 years (SD+-13). Mean diastolic BP before ECT was 84.72 that decreased post ECT ie 78.02 and 77.46 and 74.44 at interval of 1, 2 and 5 minute respectively. Post-ECT pulse and PAO2 behaved similarly. Post ECT systolic BP decreased at 1 and 5 minutes. Pulse rate decreased after ECT. Conclusion: ECT under propofol is one of the most effective and safe modality of treatment for psychiatric patients under the supervision of qualified psychiatrists and anaesthesiologists and it gives more stable hemodynamic changes. (author)

  5. Welding technology of the intermetallic Fe3 Al phase

    OpenAIRE

    K. Garbala; A. Patejuk

    2010-01-01

    This paper presents the analyses of the welding terms and estimation of the welded joints quality for intermetallic Fe3Al. Materials, on the base which, joints were made and some welding technologies has been examined. Results of that investigations let one to type welding methods and materials that gives the best physicochemical effects of the joints. Regarding to the specific properties of the welded material especially its quite high hardness and fragility, it has been proposed that when j...

  6. Eddy Current Signal Analysis for Transmit-Receive Pancake Coil on ECT Array Probe

    International Nuclear Information System (INIS)

    Lee, Hyang Beom

    2006-01-01

    In this paper, the eddy current signals come from a pair of transmit-receive (T/R) pancake coil on ECT array Probe are analyzed with the variations of the lift-of and of the distance between transmit and receive coils. To obtain the electromagnetic characteristics of the probes, the governing equation describing the eddy current problems is derived from Maxwell's equation and is solved using three-dimensional finite element method. Eddy current signals from T/R coils on ECT array probe have quite different characteristics compared with ones from impedance coil on rotating pancake coil probe. The results in this paper ran be helpful when the field eddy current signals from ECT array probe are evaluated

  7. A study and implementation of algorithm for automatic ECT result comparison

    International Nuclear Information System (INIS)

    Jang, You Hyun; Nam, Min Woo; Kim, In Chul; Joo, Kyung Mun; Kim, Jong Seog

    2012-01-01

    Automatic ECT Result Comparison Algorithm was developed and implemented with computer language to remove the human error in manual comparison with many data. The structures of two ECT Program (Eddy net and ECT IDS) that have unique file structure were analyzed to open file and upload data in PC memory. Comparison algorithm was defined graphically for easy PC programming language conversion. Automatic Result Program was programmed with C language that is suitable for future code management and has object oriented programming structure and fast development potential. Automatic Result Program has MS Excel file exporting function that is useful to use external S/W for additional analysis and intuitive result visualization function with color mapping in user friendly fashion that helps analyze efficiently

  8. Toxoplasmosis Infection and Cognitive Deficit after Electroconvulsive Treatment (ECT), Is There a Connection?

    Science.gov (United States)

    E Berg, John

    2012-01-01

    Electroconvulsive treatment (ECT) has developed over 70 years to a modern, effective way of lifting depressive moods. Memory loss and visual acuity after electroconvulsive treatment is the only remaining relevant criticism of the treatment modality when considering the overall rate of remission from this treatment compared to all other treatment modalities. A depressive state impedes memory, and memory improves on several qualities of cognition after treatment. However, the comparison of a person's memory ability from the months before depression started to the level after a course of ECT is never performed, for obvious reasons. Some infectious diseases are known to influence memory negatively through effects on the dopamine receptors. More specifically, former toxoplasmosis infection may be a factor. Preliminary data on titres of toxoplasma IgG may indicate a connection to the development of long-standing memory problems after ECT.

  9. I'm shocked: informed consent in ECT and the phenomenological-self.

    Science.gov (United States)

    Seniuk, Patrick

    2018-02-13

    This paper argues that phenomenological insights regarding selfhood are relevant to the informed consent process in the treatment of depression using electro-convulsive therapy (ECT). One of the most significant side-effects associated with ECT is retrograde amnesia. Unfortunately, the current informed consent model does not adequately appreciate the full extent in which memory loss disturbs lived-experience. Through the philosophy of Merleau-Ponty, it is possible to appreciate the way in which memory loss affects a person's self-experience, with emphasis given to one's pre-reflective and embodied, relationship with things in the world. This paper aims to demonstrate that proper informed consent should acknowledge the extent to which repeated ECT treatments affect a patient's sense self.

  10. Mass killing under the guise of ECT: the darkest chapter in the history of biological psychiatry.

    Science.gov (United States)

    Gazdag, G; Ungvari, G S; Czech, H

    2017-12-01

    Following its inception, electroconvulsive therapy (ECT), rapidly spread all over the world, including Nazi Germany. Paradoxically, at the same time, the euthanasia programme was started in Germany: the extermination of people with intellectual disabilities and severe psychiatric disorders. In Lower Austria, Dr Emil Gelny, who had been granted a specialist qualification in psychiatry after three months of clinical training, took control of two psychiatric hospitals, in Gugging and Mauer-Öhling. In 1944, he began systematically killing patients with an ECT machine, something that was not practised anywhere else before or after, and remains unprecedented in the history of convulsive therapy. He modified an ECT machine, adding extra electrodes, which he fastened onto a victim's wrists and ankles to administer lethal electric shocks.

  11. Development of intelligent Eddy Current Testing (ECT) system for PWR steam generator tube inspection

    International Nuclear Information System (INIS)

    Kawata, K.; Kawase, N.; Kurokawa, M.; Asada, Y.

    2005-01-01

    The intelligent ECT system was developed for the inspection of heat transfer tubes of the steam generator of the PWR plant. It consists of intelligent probe, data acquisition unit and data analysis system. The probe combines 24 channels inclined lay out drive coils and thin film pick-up coils with built-in electric circuits to provide high inspection capability equivalent to rotating coil ECT and high-speed inspection equivalent to conventional bobbin coil ECT. The advanced data analysis system that has filtering and automatic analysis functions is also developed to enable fast and precise analysis of large volume inspection data. The system was qualified by confirmation tests in FY 2003 to show thinned thickness sizing accuracy within ± 5%. (T. Tanaka)

  12. Pollution reduction technology program small jet aircraft engines, phase 3

    Science.gov (United States)

    Bruce, T. W.; Davis, F. G.; Kuhn, T. E.; Mongia, H. C.

    1981-01-01

    A series of Model TFE731-2 engine tests were conducted with the Concept 2 variable geometry airblast fuel injector combustion system installed. The engine was tested to: (1) establish the emission levels over the selected points which comprise the Environmental Protection Agency Landing-Takeoff Cycle; (2) determine engine performance with the combustion system; and (3) evaulate the engine acceleration/deceleration characteristics. The hydrocarbon (HC), carbon monoxide (CO), and smoke goals were met. Oxides of nitrogen (NOx) were above the goal for the same configuration that met the other pollutant goals. The engine and combustor performance, as well as acceleration/deceleration characteristics, were acceptable. The Concept 3 staged combustor system was refined from earlier phase development and subjected to further rig refinement testing. The concept met all of the emissions goals.

  13. Identification and Characterization of EctR1, a New Transcriptional Regulator of the Ectoine Biosynthesis Genes in the Halotolerant Methanotroph Methylomicrobium alcaliphilum 20Z▿ †

    OpenAIRE

    Mustakhimov, Ildar I.; Reshetnikov, Alexander S.; Glukhov, Anatoly S.; Khmelenina, Valentina N.; Kalyuzhnaya, Marina G.; Trotsenko, Yuri A.

    2009-01-01

    Genes encoding key enzymes of the ectoine biosynthesis pathway in the halotolerant obligate methanotroph Methylomicrobium alcaliphilum 20Z have been shown to be organized into an ectABC-ask operon. Transcription of the ect operon is initiated from two promoters, ectAp1 and ectAp2 (ectAp1p2), similar to the σ70-dependent promoters of Escherichia coli. Upstream of the gene cluster, an open reading frame (ectR1) encoding a MarR-like transcriptional regulator was identified. Investigation of the ...

  14. Welding technology of the intermetallic Fe3 Al phase

    Directory of Open Access Journals (Sweden)

    K. Garbala

    2010-01-01

    Full Text Available This paper presents the analyses of the welding terms and estimation of the welded joints quality for intermetallic Fe3Al. Materials, on the base which, joints were made and some welding technologies has been examined. Results of that investigations let one to type welding methods and materials that gives the best physicochemical effects of the joints. Regarding to the specific properties of the welded material especially its quite high hardness and fragility, it has been proposed that when joining intermetallic Fe3Al advisable would be welding in an argon cover with using Es9CrNiB electrode optionally electrowelding with Es 9CrNiB electrode. Welds made that way are thought to have the best properties within methods and welding materials being tested.

  15. Pollution Reduction Technology Program, Turboprop Engines, Phase 1

    Science.gov (United States)

    Anderson, R. D.; Herman, A. S.; Tomlinson, J. G.; Vaught, J. M.; Verdouw, A. J.

    1976-01-01

    Exhaust pollutant emissions were measured from a 501-D22A turboprop engine combustor and three low emission combustor types -- reverse flow, prechamber, and staged fuel, operating over a fuel-air ratio range of .0096 to .020. The EPAP LTO cycle data were obtained for a total of nineteen configurations. Hydrocarbon emissions were reduced from 15.0 to .3 lb/1000 Hp-Hr/cycle, CO from 31.5 to 4.6 lb/1000 Hp-Hr/cycle with an increase in NOx of 17 percent, which is still 25% below the program goal. The smoke number was reduced from 59 to 17. Emissions given here are for the reverse flow Mod. IV combustor which is the best candidate for further development into eventual use with the 501-D22A turboprop engine. Even lower emissions were obtained with the advanced technology combustors.

  16. An Assessment of the Technical Readiness of the Vapor Phase Catalytic Ammonia Removal Process (VPCAR) Technology

    Science.gov (United States)

    Flynn, Michael

    2000-01-01

    This poster provides an assessment of the technical readiness of the Vapor Phase Catalytic Ammonia Removal Process (VPCAR). The VPCAR technology is a fully regenerative water recycling technology designed specifically for applications such as a near term Mars exploration mission. The VPCAR technology is a highly integrated distillation/catalytic oxidation based water processor. It is designed to accept a combined wastewater stream (urine, condensate, and hygiene) and produces potable water in a single process step which requires -no regularly scheduled re-supply or maintenance for a 3 year mission. The technology is designed to be modular and to fit into a volume comparable to a single International Space Station Rack (when sized for a crew of 6). This poster provides a description of the VPCAR technology and a summary of the current performance of the technology. Also provided are the results of two separate NASA sponsored system trade studies which investigated the potential payback of further development of the VPCAR technology.

  17. Direction of Technology Development for Nuclear Power Plants at the O and M Phase

    International Nuclear Information System (INIS)

    Jung, Insu; Park, Hwanpyo; Kim, Younghyun

    2014-01-01

    Recently, Korea has attempted to advance overseas markets by securing competitive power in nuclear power technology. In order to develop and operate overall construction management systems with Korea's own brand equipped with sufficient applicability and competitive power in the market abroad and to ensure equal competitive power with other foreign advanced companies of nuclear power plants, Korea has launched a project called 'Data Centric Integration/Automation Technology for NP Project Management System' since July 2011. This project is divided into two phases: the first phase from 2012 to 2016 realizes EPCS stage, and the second phase from 2017 to 2020 extends to O and M stage. Appropriate technology development planning must be established if 'Data Centric Integration/Automation Technology for NP Project Management System' conducted at the first phase would extend to O and M stage at the second phase. Therefore, this study aimed at drawing out the direction of technology development based on present analysis of process at the operational phase of nuclear power plants in Korea conducted as previous study. This study analyzed current operation and maintenance systems first, analyzing the results of differences between the operation process of nuclear plants in Korea which was suggested at the previous study and the process of the Korea Hydro and Nuclear Power Co., Ltd. (hereafter referred to as 'KHNP') and drawing out the direction of technology development for nuclear power plants at the operational phase from the viewpoint of life cycle

  18. Project plan hydrogen energy systems technology. Phase 1: Hydrogen energy systems technology study

    Science.gov (United States)

    1974-01-01

    An overview of the potential need for hydrogen as a source of energy in the future was presented in order to identify and define the technology requirements for the most promising approaches to meet that need. The following study objectives were discussed: (1) determination of the future demand for hydrogen, based on current trends and anticipated new uses, (2) identification of the critical research and technology advances required to meet this need considering, to the extent possible, raw material limitations, economics, and environmental effects, and (3) definition and recommendation of the scope and space of a National Hydrogen Energy Systems Technology Program and outline of a Program Development Plan.

  19. Flexible Electrostatic Technologies for Capture and Handling, Phase 1

    Science.gov (United States)

    Bryan, Thomas

    2015-01-01

    Fundamental to many of NASA's in-space transportation missions is the capture and handling of various objects and vehicles in various orbits for servicing, debris disposal, sample retrieval, and assembly without the benefit of sufficient grapple fixtures and docking ports. To perform similar material handling tasks on Earth, pincher grippers, suction grippers, or magnetic chucks are used, but are unable to reliably grip aluminum and composite spacecraft, insulation, radiators, solar arrays, or extra-terrestrial objects in the vacuum of outer space without dedicated handles in the right places. The electronic Flexible Electrostatic Technologies for space Capture and Handling (FETCH) will enable reliable and compliant gripping (soft dock) of practically any object in various orbits or surfaces without dedicated mechanical features, very low impact capture, and built-in proximity sensing without any conventional actuators. Originally developed to handle semiconductor and glass wafers during vacuum chamber processing without contamination, the normal rigid wafer handling chucks are replaced with thin metal foil segments laminated in flexible insulation driven by commercial off-the-shelf solid state, high-voltage power supplies. Preliminary testing in NASA Marshall Space Flight Center's (MSFC's) Flat Floor Robotics Lab demonstrated compliant alignment and gripping with a full-sized, 150-lb microsat mockup and translation before a clean release with a flip of a switch. The flexible electrostatic gripper pads can be adapted to various space applications with different sizes, shapes, and foil electrode layouts even with openings through the gripper pads for addition of guidance sensors or injection of permanent adhesives. With gripping forces estimated between 0.5 and 2.5 lb/in2 or 70-300 lb/ft2 of surface contact, the FETCH can turn on and off rapidly and repeatedly to enable sample handling, soft docking, in-space assembly, precision relocation, and surface translation

  20. Short-term effect of ECT in middle-aged and elderly patients with intractable catatonic schizophrenia.

    Science.gov (United States)

    Suzuki, Kazumasa; Awata, Shuichi; Matsuoka, Hiroo

    2003-06-01

    The management of middle-aged and elderly patients with catatonic schizophrenia has long been a major problem in clinical geriatric psychiatry. Most cases are intractable because of medication resistance, medication intolerance, or severe medical conditions. Electroconvulsive therapy (ECT) is recognized as one of the most efficacious therapies for catatonic schizophrenia. Thus, we conducted a prospective study of the short-term effect of acute ECT on middle-aged and elderly patients with intractable catatonic schizophrenia. Subjects were nine consecutive patients older than 45 years who had fulfilled the DSM-IV criteria for catatonic-type schizophrenia and had been referred for first-time acute ECT after other treatments had failed. The patients were treated at Tohoku University Hospital between January 1998 and March 2002. We evaluated the clinical response of these patients to acute ECT by means of the brief psychiatric rating scale (BPRS). We also evaluated adverse effects of acute ECT. The response rate was 100%. The total BPRS score was improved in all nine subjects at the end of the ECT course and 1 week after the final session in comparison with the total pre-ECT BPRS score (11.9 +/- 7.5 and 9.3 +/- 9.2 versus 57.1 +/- 13.1, respectively, p = 0.008, p = 0.008). The total Global Assessment of Functioning score was also improved significantly (from 10.8 +/- 9.4 just before ECT to 61.6 +/- 18.9 1 week after ECT, p = 0.008). Guy's five factors (thought disturbance, activation, anxiety-depression, hostility-suspiciousness, and anergia) improved significantly (p = 0.008, p = 0.008, p = 0.018, p = 0.012, p = 0.008, respectively). One patient showed supraventricular premature contractions (SVPCs) during an ECT seizure. After some ECT sessions, three patients exhibited mild to moderate delirium that disappeared within 3 days. However, no patient experienced a severe cognitive or physical adverse effect during the course of ECT. Acute ECT has a good short-term effect

  1. Envisioning a New Foundation for Gifted Education: Evolving Complexity Theory (ECT) of Talent Development

    Science.gov (United States)

    Dai, David Yun

    2017-01-01

    This article presents a new theory of talent development, evolving complexity theory (ECT), in the context of the changing theoretical directions as well as the landscape of gifted education. I argue that gifted education needs a new foundation that provides a broad psychosocial basis than what the notion of giftedness can afford. A focus on…

  2. 7 CFR 985.31 - Research and development proj-ects.

    Science.gov (United States)

    2010-01-01

    ..., may establish or provide for the establishment of production research, marketing research and... 7 Agriculture 8 2010-01-01 2010-01-01 false Research and development proj-ects. 985.31 Section 985.31 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING...

  3. [Preliminary report on the efficacy and safety of brief-pulse ECT in depression].

    Science.gov (United States)

    Motohashi, N; Takano, H; Terada, T; Ogawa, K; Muramatsu, R

    2000-05-01

    Because there is no report on the use of brief-pulse devices in Japan, we have examined the efficacy and safety of brief-pulse electroconvulsive therapy (ECT) on four treatment-resistant depressive patients (three males and one female, 55.0 +/- 17.8 years of age). The ethical committee of the National Center of Neurology and Psychiatry approved this study and written informed consent was obtained from all of the patients. ECT was administered bilaterally twice a week using atropine, propofol, and succinylcholine (or vecronium) as anesthetic medications. The Hamilton rating scale for depression scores decreased from 30.5 +/- 11.0 to 14.8 +/- 11.5 following a course of 5-12 treatments. Memory and cognitive functioning, evaluated using the Mini-Mental State Examination, Short-Memory Questionnaire and so on, had not changed a week after the last ECT. These results further support the view that brief-pulse ECT is efficacious and safe for the treatment of depression.

  4. Development of a technique for three-dimensional image reconstruction from emission computed tomograms (ECT)

    International Nuclear Information System (INIS)

    Gerischer, R.

    1987-01-01

    The described technique for three-dimensional image reconstruction from ECT sections is based on a simple procedure, which can be carried out with the aid of any standard-type computer used in nuclear medicine and requires no sophisticated arithmetic approach. (TRV) [de

  5. Dynamic Isotope Power System: technology verification phase, program plan, 1 October 1978

    International Nuclear Information System (INIS)

    1979-01-01

    The technology verification phase program plan of the Dynamic Isotope Power System (DIPS) project is presented. DIPS is a project to develop a 0.5 to 2.0 kW power system for spacecraft using an isotope heat source and a closed-cycle Rankine power-system with an organic working fluid. The technology verification phase's purposes are to increase the system efficiency to over 18%, to demonstrate system reliability, and to provide an estimate for flight test scheduling. Progress toward these goals is reported

  6. EFFECTS OF EDTA ON LEA indica) SEEDLINGS REPLANTE ECTS ...

    African Journals Online (AJOL)

    userpc

    ABSTRACT. This research investigates the effects of E indica) seedlings grown in hydroponic sol collected from the garden of the Departme. Science and Technology Wudil, replanted in and EDTA. All plants grown in treated hydro time varied highly significantly (Pr < 0.00 values of treated hydroponics were signific.

  7. Development of a Hydrologic Characterization Technology for Fault Zones Phase II 2nd Report

    Energy Technology Data Exchange (ETDEWEB)

    Karasaki, Kenzi [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Doughty, Christine [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Gasperikova, Erika [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Peterson, John [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Conrad, Mark [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Cook, Paul [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Tiemi, Onishi [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2011-03-31

    This is the 2nd report on the three-year program of the 2nd phase of the NUMO-LBNL collaborative project: Development of Hydrologic Characterization Technology for Fault Zones under NUMO-DOE/LBNL collaboration agreement. As such, this report is a compendium of the results by Kiho et al. (2011) and those by LBNL.

  8. Up-scaling, formative phases, and learning in the historical diffusion of energy technologies

    International Nuclear Information System (INIS)

    Wilson, Charlie

    2012-01-01

    The 20th century has witnessed wholesale transformation in the energy system marked by the pervasive diffusion of both energy supply and end-use technologies. Just as whole industries have grown, so too have unit sizes or capacities. Analysed in combination, these unit level and industry level growth patterns reveal some consistencies across very different energy technologies. First, the up-scaling or increase in unit size of an energy technology comes after an often prolonged period of experimentation with many smaller-scale units. Second, the peak growth phase of an industry can lag these increases in unit size by up to 20 years. Third, the rate and timing of up-scaling at the unit level is subject to countervailing influences of scale economies and heterogeneous market demand. These observed patterns have important implications for experience curve analyses based on time series data covering the up-scaling phases of energy technologies, as these are likely to conflate industry level learning effects with unit level scale effects. The historical diffusion of energy technologies also suggests that low carbon technology policies pushing for significant jumps in unit size before a ‘formative phase’ of experimentation with smaller-scale units are risky. - Highlights: ► Comparative analysis of energy technology diffusion. ► Consistent pattern of sequential formative, up-scaling, and growth phases. ► Evidence for conflation of industry level learning effects with unit level up-scaling. ► Implications for experience curve analyses and technology policy.

  9. Structures and Design Phase I Summary for the NASA Composite Cryotank Technology Demonstration Project

    Science.gov (United States)

    Johnson, Ted; Sleight, David W.; Martin, Robert A.

    2013-01-01

    A description of the Phase I structures and design work of the Composite Cryotank Technology Demonstration (CCTD) Project is in this paper. The goal of the CCTD Project in the Game Changing Development (GCD) Program is to design and build a composite liquid-hydrogen cryogenic tank that can save 30% in weight and 25% in cost compared to state-of-the-art aluminum metallic cryogenic tank technology when the wetted composite skin wall is at an allowable strain of 5000 in/in. Three Industry teams developed composite cryogenic tank concepts that are compared for weight to an aluminum-lithium (Al-Li) cryogenic tank designed by NASA in Phase I of the CCTD Project. The requirements used to design all of the cryogenic tanks in Phase I will be discussed and the resulting designs, analyses, and weight of the concepts developed by NASA and Industry will be reviewed and compared.

  10. Technology Reinvestment Program/Advanced ``Zero Emission'' Control Valve (Phase II)

    Energy Technology Data Exchange (ETDEWEB)

    J. Napoleon

    1998-12-01

    The objectives of this effort are to determine, develop and demonstrate the feasibility of significantly reducing the cost and expanding the applications for a family of Advanced Zero Emissions Control Valves that meets the fugitive emissions requirements of the 1990 Amendments to the Clean Air Act. This program is a direct technology spin-off from the valve technology that is critical to the US Navy's Nuclear Powered Fleet. These zero emissions valves will allow the Hydrocarbon and Chemical Processing Industries, etc., to maintain their competitiveness and still meet environmental and safety requirements. Phase 2 is directed at refining the basic technologies developed during Phase 1 so that they can be more readily selected and utilized by the target market. In addition to various necessary certifications, the project will develop a full featured digital controller with ``smart valve'' growth capability, expanding valve sizes/applications and identifying valve materials to permit applications in severe operational environments.

  11. Two-year intraocular delivery of ciliary neurotrophic factor by encapsulated cell technology implants in patients with chronic retinal degenerative diseases.

    Science.gov (United States)

    Kauper, Konrad; McGovern, Cahil; Sherman, Sandy; Heatherton, Pam; Rapoza, Rob; Stabila, Paul; Dean, Brenda; Lee, Alice; Borges, Suzanna; Bouchard, Bruce; Tao, Weng

    2012-11-01

    To evaluate the pharmacokinetics of ciliary neurotrophic factor (CNTF) delivered over a period of up to 2 years by an intraocular encapsulated cell technology (ECT) implant in patients with retinitis pigmentosa (RP) and geographic atrophy (GA). Patients from phase 1 RP (CNTF1); phase 2 GA (CNTF2); and phase 2 late and early stage RP (CNTF3, and CNTF4) studies received an ECT-CNTF implant, designated as "NT-501," in one eye. Per protocol, all implants (n = 10) were removed at 6 months from the CNTF1 study patients. Explant for the phase 2 studies was optional, but several patients were explanted at 12, 18, and 24 months post implant. A small amount of vitreous sample was collected at the time of explant. The rate of CNTF secretion from the explants and the corresponding vitreous CNTF levels were evaluated for each time point. Serum samples from these patients were evaluated for CNTF, anti-CNTF antibodies, and antibodies to the encapsulated cells. NT-501 implants produced CNTF consistently over a 2-year period. The calculated half-life of CNTF in the vitreous continuously delivered by ECT implants was 51 months, with CNTF levels statistically equivalent between the 6- and 24-month implant period. CNTF, anti-CNTF antibodies, and antibodies to the encapsulated cells were not detected in the serum of patients. This retrospective study demonstrated that the intraocular ECT implant has a favorable pharmacokinetic profile for the treatment of chronic retinal degenerative diseases without systemic exposure. (ClinicalTrials.gov numbers, NCT00063765, NCT00447954, NCT00447980, NCT00447993.).

  12. Science Highlights from the RBSP-ECT Particle Instrument Suite on NASA's Van Allen Probes Mission

    Science.gov (United States)

    Spence, Harlan

    2014-05-01

    The NASA Van Allen Probes mission includes an instrument suite known as the Radiation Belt Storm Probes (RBSP) - Energetic Particle, Composition, and Thermal Plasma (ECT) suite. RBSP-ECT contains a well-proven complement of particle instruments to ensure the highest quality measurements ever made in the radiation belts and the inner magnetosphere. The coordinated RBSP-ECT particle measurements, analyzed in combination with fields and waves observations and state of-the-art theory and modeling, provide new understanding on the acceleration, global distribution, and variability of radiation belt electrons and ions, key science objectives of NASA's Living With a Star program and the Van Allen Probes mission. The RBSP-ECT suite consists of three highly-coordinated instruments: the Helium Oxygen Proton Electron (HOPE) spectrometer, the Magnetic Electron Ion Spectrometer (MagEIS), and the Relativistic Electron Proton Telescope (REPT). Collectively these three instrument types cover comprehensively the full electron and ion spectra from one eV to 10's of MeV with sufficient energy resolution, pitch angle coverage and resolution, and with composition measurements in the critical energy range up to 50 keV and also from a few to 50 MeV/nucleon. All three instruments are based on measurement techniques proven in the radiation belts, then optimized to provide unambiguous separation of ions and electrons and clean energy responses even in the presence of extreme penetrating background environments. In this presentation, we summarize overall ECT science goals and then show scientific results derived from the ECT suite on the dual Van Allen Probes spacecraft to date. Mission operations began only in late October 2012, and we have now achieved significant results. Results presented here will include substantial progress toward resolving primary Van Allen Probes science targets, such as: the relative role of localized acceleration versus transport-generated particle acceleration

  13. Early Science Results From the NASA Van Allen Probes Mission RBSP-ECT Instrument Suite

    Science.gov (United States)

    Spence, Harlan; Reeves, Geoff; Rbspect Team

    2013-04-01

    The NASA Van Allen Probes mission includes an instrument suite known as the Radiation Belt Storm Probes (RBSP) - Energetic Particle, Composition, and Thermal Plasma (ECT) suite. RBSP-ECT contains a well-proven complement of particle instruments to ensure the highest quality measurements ever made in the radiation belts and the inner magnetosphere. The coordinated RBSP-ECT particle measurements, analyzed in combination with fields and waves observations and state of-the-art theory and modeling, provide new understanding on the acceleration, global distribution, and variability of radiation belt electrons and ions, key science objectives of NASA's Living With a Star program and the Van Allen Probes mission. The RBSP-ECT suite consists of three highly-coordinated instruments: the Helium Oxygen Proton Electron (HOPE) spectrometer, the Magnetic Electron Ion Spectrometer (MagEIS), and the Relativistic Electron Proton Telescope (REPT). Collectively these three instrument types cover comprehensively the full electron and ion spectra from one eV to 10's of MeV with sufficient energy resolution, pitch angle coverage and resolution, and with composition measurements in the critical energy range up to 50 keV and also from a few to 50 MeV/nucleon. All three instruments are based on measurement techniques proven in the radiation belts, then optimized to provide unambiguous separation of ions and electrons and clean energy responses even in the presence of extreme penetrating background environments. In this presentation, we summarize overall ECT science goals and then show early scientific results derived from the ECT suite on the dual Van Allen Probes spacecraft. Mission operations began only in late October 2012, but we have already achieved significant early results. Results presented here will include substantial progress toward resolving primary Van Allen Probes science targets, such as: the relative role of localized acceleration versus transport-generated particle

  14. An Experimental Study of Two-Phase Pulse Flushing Technology in Water Distribution Systems

    Directory of Open Access Journals (Sweden)

    Zhaozhao Tang

    2017-12-01

    Full Text Available The deterioration of drinking water during distribution process is caused by many factors. The microorganisms and substances peeling off from the “growth-ring” make the secondary pollution in drinking water distribution systems. To reduce the secondary pollution, two-phase pulse flushing technology is introduced to quickly remove the “growth-ring”. In this study, experiment is undertaken for investigating the efficiency of the two-phase pulse flushing and finding the best setting combination. A case study is undertaken to compare the efficiencies between the two-phase pulse and the single-phase flushing. The best setting combination of the two-phase pulse flushing is at the frequency 4 s–6 s (air inflow time is 4 s and air cut off time is 6 s and the round air inflow nozzle is set at the bottom of the pipe. Two-phase pulse flushing technology can save 95% of water and 6 h 40 min flushing time.

  15. Technological research of differential phase shift keying receiver in the satellite-to-ground laser communication

    Science.gov (United States)

    Ma, Xiaoping; Sun, Jianfeng; Zhi, Yanan; Liu, Liren

    2012-10-01

    Laser communication links between satellite and ground remains a bottleneck problem that has not been solved in free space communication network now. Atmospheric disturbances have badly influenced the wave-front of signal light and destroyed the integrality of optical phase, so the bit error rate (BER) is increased at the receiving terminal in the space-to-ground laser communication. With conventional coherent reception, the contrast of coherent light increased dramatically, and transmission efficiency of Space to ground laser communication decreased. Receiving technology based on differential phase shift keying (DPSK) is proposed here to overcome the effects of atmosphere here. Differential phase shift keying without the integrality and compensation of the optical phases, is suited for high rate space to ground communication links due to its immunity of the wavefront of a beam passing atmosphere. A Mach-Zehnder delay interferometer is used for differential delay which is equal to the one bit period. The differential data information can be obtained from the optical phase changes. Differential phase modulation technique can be a promising optical receiving technology.

  16. Information Technology for Workplace Communication. Workscape 21: The Ecology of New Ways of Working.

    Science.gov (United States)

    Becker, Franklin; Tennessen, Carolyn M.; Young, David

    A study was undertaken to understand the role of electronic communication technologies (ECTs) in maintaining work-related communication. The study site was Sun Microsystems, a company at the high end of the curve in terms of its commitment to and employees' experience with ECTs. An electronic focus group (n=40, 4% response) and an e-mail survey…

  17. Electronic Communications Technologies and the Transition to College: Links to Parent-Child Attachment and Adjustment

    Science.gov (United States)

    Sarigiani, Pamela A.; Trumbell, Jill M.; Camarena, Phame M.

    2013-01-01

    Electronic communications technologies (ECTs) help college students and parents remain in contact. Because recent reports have emphasized a link between ECTs, helicopter parenting, and autonomy issues, this study focused on the significance of contact patterns for attachment and student adjustment. First-semester college students (199 female, 81…

  18. Development of phase change materials based microencapsulated technology for buildings: A review

    Energy Technology Data Exchange (ETDEWEB)

    Tyagi, V.V.; Kaushik, S.C. [Centre for Energy Studies, Indian Institute of Technology Delhi, Hauz Khas, New Delhi 110016 (India); Tyagi, S.K. [School of Infrastructure Technology and Resource Management, Shri Mata Vaishno Devi University, Katra 182320, J and K (India); Akiyama, T. [Center for Advanced Research of Energy Conversion Materials, Hokkaido University, Kita 13, Nishi 8, Kita-ku, Sapporo 060-86283 (Japan)

    2011-02-15

    Thermal energy storage (TES) systems using phase change material (PCM) have been recognized as one of the most advanced energy technologies in enhancing the energy efficiency and sustainability of buildings. Now the research is focus on suitable method to incorporate PCMs with building. There are several methods to use phase change materials (PCMs) in thermal energy storage (TES) for different applications. Microencapsulation is one of the well known and advanced technologies for better utilization of PCMs with building parts, such as, wall, roof and floor besides, within the building materials. Phase change materials based microencapsulation for latent heat thermal storage (LHTS) systems for building application offers a challenging option to be employed as effective thermal energy storage and a retrieval device. Since the particular interest in using microencapsulation PCMs for concrete and wall/wallboards, the specific research efforts on both subjects are reviewed separately. This paper presents an overview of the previous research work on microencapsulation technology for thermal energy storage incorporating the phase change materials (PCMs) in the building applications, along with few useful conclusive remarks concluded from the available literature. (author)

  19. Ketofol-Dexmedetomidine combination in ECT: A punch for depression and agitation

    Directory of Open Access Journals (Sweden)

    Tarek Shams

    2014-01-01

    Full Text Available Background and Aims : The choice of anaesthetic agent for electroconvulsive therapy (ECT depends on seizure duration, haemodynamic, and recovery parameters. The aim of the study was to assess the effects of ketamine-propofol induction with dexmedetomidine preadministration (ketofol-dex group and without its preadministration (ketofol group on haemodynamics, depression, seizure duration, recovery characteristics, and agitation following ECT in patients with depression. Methods : 40 patients aged 18-60 years were scheduled for ECT for treatment of depression. Dexmedetomidine (0.5 μg/kg diluted to a volume of 10 ml with 0.9% saline or 10 ml 0.9% saline were infused intravenously over 10 minutes before induction of anaesthesia with ketamine and propofol (ketofol. Statistical analysis was carried out using the Statistical Software for the Social Sciences (SPSS package. Results : Motor seizure duration in ketofol group was significantly less compared to ketofol-dex group (35.8 ± 6.6s versus 38.9 ± 4.9s. Total ketofol used was significantly less in ketofol-dex group compared to ketofol group (78.5 ± 10.8mg versus 90 ± 13.2mg. The number of patients with agitation score >2 was significantly lower in ketofol-dex group (1.4% compared to ketofol group (8.6%. There was significant decrease (P = 0.000 in mean arterial pressure (MAP and heart rate (HR in ketofol-dex group compared to ketofol group at 20, 30, and 40 minutes for MAP and at 10, 20, 30, and 40 minutes for HR. Conclusions : Ketofol-dex mixture in ECT is associated with longer mean seizure duration, effective anti-depression, less incidence of agitation, more patient satisfaction, and acceptable decreases in blood pressure and HR when compared to ketofol alone.

  20. Toxoplasmosis infection and cognitive deficit after electroconvulsive treatment (ECT), is there a connection?

    OpenAIRE

    Berg, John Erik

    2012-01-01

    Electroconvulsive treatment (ECT) has developed over 70 years to a modern, effective way of lifting depressive moods. Memory loss and visual acuity after electroconvulsive treatment is the only remaining relevant criticism of the treatment modality when considering the overall rate of remission from this treatment compared to all other treatment modalities. A depressive state impedes memory, and memory improves on several qualities of cognition after treatment. However, the comparison of a pe...

  1. p Effe prolife ect of s eration cultur season and s res of H nal coll ...

    African Journals Online (AJOL)

    SAM

    2014-08-07

    Aug 7, 2014 ... of rubber tree occurred both in summer and rainy season. In case of mangosteen, .... of flowering ( and 43.75%. ected from d collected in 3 allus (Figure from the first d white in colo nal collectio om culturing oliferate on M. 0.2 mg.L-1 N callus from a ..... rare and endangered oak species of Greece. Plant Cell ...

  2. Passive millimeter-wave imaging technology for phased-array systems

    Science.gov (United States)

    Martin, Christopher A.; Clark, Stuart E.; Lovberg, John A.; Kolinko, Vladimir G.

    2003-08-01

    Trex Enterprises has developed a passive millimeter-wave imaging system incorporating a number of new technologies. The system has a pupil-plane architecture that uses a phased array, flat panel antenna and a phase processor based upon millimeter-wave optics. The production and operation of a 232-element W-band phased array and processor poses a number of technical problems including minimizing losses in the front end and adjusting the phase lengths of the processor. The system also has 192 frequency processor cards that perform real-time Fourier analysis of W-band signals over an 18 GHz bandwidth using millimeter-wave optics. Production of a suitable phase and frequency processor in large quantities that form good beams and maintain signal strength requires the adoption of new materials and design strategies. The refinement of these technologies at W-band frequencies allowed Trex Enterprises to produce an imager which is both compact and suitable for large-scale production. In this paper, we will discuss the design and production of the millimeter-wave components unique to this system architecture. We will also present the performance of these components and how they affect the performance of the millimeter-wave imager as a whole. An integrated front end is tested to determine the accuracy of the beam-forming network in producing antenna patterns.

  3. UTILITY ADVANCED TURBINE SYSTEMS (ATS) TECHNOLOGY READINESS TESTING: PHASE 3R

    Energy Technology Data Exchange (ETDEWEB)

    None

    1999-09-01

    The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the US Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed, including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially by GE. This change has resulted from DOE's request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include full speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown. This report summarizes work accomplished in 2Q99.

  4. Rigid Polyurethane Foam (RPF) Technology for Countermines (Sea) Program Phase II

    Energy Technology Data Exchange (ETDEWEB)

    WOODFIN,RONALD L.; FAUCETT,DAVID L.; HANCE,BRADLEY G.; LATHAM,AMY E.; SCHMIDT,C.O.

    1999-10-01

    This Phase II report documents the results of one subtask initiated under the joint Department of Energy (DOE)/Department of Defense (DoD) Memorandum of Understanding (MOU) for Countermine Warfare. The development of Rigid Polyurethane Foams for neutralization of mines and barriers in amphibious assault was the objective of the tasking. This phase of the program concentrated on formation of RPF in water, explosive mine simulations, and development of foam and fabric pontoons. Field experimentation was done primarily at the Energetic Materials Research and Testing Center (EMRTC) of the New Mexico Institute of Mining and Technology, Socorro, NM between February 1996 and September 1998.

  5. O metotrexate no tratamento da prenhez ectópica íntegra - relato de caso

    Directory of Open Access Journals (Sweden)

    Eduardo B. Coscia

    2007-05-01

    Full Text Available Este trabalho é baseado no relato de caso de uma paciente com diagnóstico de prenhez ectópica íntegra, submetida à terapêutica com dose única de metotrexate por via intramuscular. O diagnóstico de prenhez ectópica íntegra, um dos mais difíceis na obstetrícia clássica, vem sendo facilitado com o avanço dos métodos propedêuticos atuais, constituídos principalmente pela tecnologia ecográfica e dosagens bioquímicas pelo radioimunoensaio. Neste presente caso, utilizamos a ultrassonografia transvaginal e a dosagem sérica de gonadotrofina coriônica (b-hCG. Com auxílio destes exames fizemos o diagnóstico precoce de acerto, fundamental para o resultado terapêutico alcançado. O uso de metotrexate por via intramuscular é uma ótima opção no tratamento de prenhez ectópica íntegra, com preservação da anatomia tubária e, consequentemente, da fertilidade.

  6. Electroconvulsive therapy (ECT) during pregnancy: quantifying and assessing the electric field strength inside the foetal brain.

    Science.gov (United States)

    Kibret, Behailu; Premaratne, Malin; Sullivan, Caley; Thomson, Richard H; Fitzgerald, Paul B

    2018-03-07

    Electroconvulsive therapy (ECT) is an effective treatment option for severe mental illness during pregnancy. However, there is little knowledge about the amount of electric field produced inside the foetus, which is important to understand the effects of ECT on the foetal excitable tissues. Thus, in this paper, the electric field strength inside the foetus was computed and compared to the basic restriction of the International Commission for Non-Ionizing Radiation Protection (ICNIRP). A computational human phantom representing a 30-weeks pregnant female, four types of electrode placements and a range of stimulus pulse width (0.25 ms-2 ms) and frequency (10 Hz-140 Hz) were used to compute the electric field inside the foetus. A linear relationship between the maximum electric field inside the foetal brain and the electrode current was derived. The results suggest that, considering the maximum current output, pulse width, and frequency range of constant-current ECT devices, the electric field produced inside the foetal brain is most likely below the ICNIRP basic restriction. This is based on the practical scenario of a 30-weeks foetus with a bottom-up and head-down foetal position and the mother taller than 1.62 m.

  7. Emerging technologies and approaches to minimize discharges into Lake Michigan Phase 2, Module 3 report.

    Energy Technology Data Exchange (ETDEWEB)

    Negri, M. C.; Gillenwater, P.; Urgun Demirtas, M. (Energy Systems)

    2011-05-11

    Purdue University Calumet (Purdue) and Argonne National Laboratory (Argonne) have conducted an independent study to identify deployable technologies that could help the BP Whiting Refinery, and other petroleum refineries, meet future wastewater discharge limits. This study has been funded by BP. Each organization tested a subset of the target technologies and retains sole responsibility for its respective test design and implementation, quality assurance and control, test results obtained from each of the technologies, and corresponding conclusions and recommendations. This project was divided in two phases and modules. This report summarizes the work conducted by Argonne in Phase II Module 3 (Bench Scale Testing). Other Modules are discussed elsewhere (Emerging Technologies and Approaches to Minimize Discharges into Lake Michigan, Phase 2, Modules 1-3 Report, April 2011, prepared for BP Americas by the Argonne - Purdue Task Force). The goal of this project was to identify and assess available and emerging wastewater treatment technologies for removing mercury and vanadium from the Whiting Refinery wastewater and to conduct bench-scale tests to provide comparable, transparent, and uniform results across the broad range of technologies tested. After the bench-scale testing phase, a previously developed decision matrix was refined and applied by Argonne to process and review test data to estimate and compare the preliminary performance, engineering configuration, preliminary cost, energy usage, and waste generation of technologies that were shown to be able to remove Hg and/or V to below the target limit at the bench scale. The data were used as the basis to identify the best candidates for further testing at the bench or pilot scale on a slip stream of effluent to lake (ETL) or clarifier effluent (CE) at the Whiting Refinery to determine whether future limits could be met and to generate other pertinent data for scale-up and sustainability evaluation. As a result of

  8. Comparison of two anesthetic induction methods:ketamin and thiopental Na for ECT in major depression disorder patients

    Directory of Open Access Journals (Sweden)

    Ali Barkhori

    2014-05-01

    Conclusion: . Severity of depression and seizure duration changes showed that ketamin is better than thiopental Na. Thus, it seems that ketamin administration can be used as an alternative method of anesthesia in depression patients that candidate for ECT..

  9. An analysis of signal characteristics due to coil-gap variation of ECT bobbin probe for steam generation tube

    International Nuclear Information System (INIS)

    Nam, Min Woo; Cho, Chan Hee; Jee, Dong Hyun; Jung, Jee Hong; Lee, Hee Jong

    2006-01-01

    The bobbin probe technique is basically one of the important ECT methods for the steam generator tube integrity assesment that is practiced during each plant outage. The bobbin probe is one of the essential components which consist of the whole ECT examination system, and provides us a decisive data for the evaluation of tube integrity in compliance with acceptance criteria described in specific procedures. The selection of examination probe is especially important because the quality of acquired ECT data is determined by the probe design characteristics, geometry and operation frequencies, and has an important effect on examination results. In this study, the relationship between electric characteristic changes and differential coil gap variation has been investigated to optimize the ECT signal characteristics of the bobbin probe. With the results from this study, we have elucidated that the optimum coil gap is 1.2 - 1.6 mm that give the best result for O.D. volumetric defects in ASME calibration standards.

  10. Phase I Field Test Results of an Innovative DNAPL Remediation Technology: The Hydrophobic Lance

    International Nuclear Information System (INIS)

    Tuck, D.M.

    1999-01-01

    An innovative technology for recovery of pure phase DNAPL was deployed in the subsurface near the M-Area Settling Basin, continuing the support of the A/M Area Ground Water Corrective Action Program (per Part B requirements). This technology, the Hydrophobic Lance, operates by placing a neutral/hydrophobic surface (Teflon) in contact with the DNAPL. This changes the in situ conditions experienced by the DNAPL, allowing it to selectively drain into a sump from which it can be pumped. Collection of even small amounts of DNAPL can save years of pump-and-treat operation because of the generally low solubility of DNAPL components

  11. IFMIF (International Fusion Materials Irradiation Facility) key element technology phase interim report

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, Hiroo; Ida, Mizuho; Sugimoto, Masayoshi; Takeuchi, Hiroshi; Yutani, Toshiaki (eds.) [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2002-03-01

    Activities of International Fusion Materials Irradiation Facility (IFMIF) have been performed under an IEA collaboration since 1995. IFMIF is an accelerator-based deuteron (D{sup +})-lithium (Li) neutron source designed to produce an intense neutron field (2 MW/m{sup 2}, 20 dpa/year for Fe) in a volume of 500 cm{sup 3} for testing candidate fusion materials. In 2000, a 3 year Key Element technology Phase (KEP) of IFMIF was started to reduce the key technology risk factors. This interim report summarizes the KEP activities until mid 2001 in the major project work-breakdown areas of accelerator, target, test facilities and design integration. (author)

  12. RF Phase Reference Distribution System for the TESLA Technology Based Projects

    CERN Document Server

    Czuba, K; Romaniuk, R S

    2013-01-01

    Since many decades physicists have been building particle accelerators and usually new projects became more advanced, more complicated and larger than predecessors. The importance and complexity of the phase reference distribution systems used in these accelerators have grown significantly during recent years. Amongst the most advanced of currently developed accelerators are projects based on the TESLA technology. These projects require synchronization of many RF devices with accuracy reaching femtosecond levels over kilometre distances. Design of a phase reference distribution system fulfilling such requirements is a challenging scientific task. There are many interdisciplinary problems which must be solved during the system design. Many, usually negligible issues, may became very important in such system. Furthermore, the design of a distribution system on a scale required for the TESLA technology based projects is a new challenge and there is almost no literature sufficiently covering this subject. This th...

  13. High Integrated Microwave Architecture Using LTCC-SIP Technology in Active Phased Array Antenna Applications

    Science.gov (United States)

    Zhou, Jun; Shi, Wei; Dou, Wen-Bin; Shen, Ya

    2012-06-01

    A kind of three dimensional Low Temperature Co-fired Ceramic (LTCC)-System in Package (SIP) transition was proposed in this paper. The basic design of SIP with LTCC technology was done by vertical transitions which transmit the microwave signal from the bottom to the surface of the substrate. The measured insertion loss did not exceed 1.5 dB, which contains the insertion loss of the test board about 0.6 dB at 18 GHz and the return loss was better than-15 dB up to 18 GHz. Then this technology was applied to a kind of phase shifting and amplifier module with two output ports. Basing on this module, a miniature Ku-band active phase array antenna was realized. The design results in a small size(84.8 mm×84.8 mm×55 mm). The measured performance of systems radiation pattern was also given.

  14. Application of Ultrasonic Phased Array Technology to the Detection of Defect in Composite Stiffened-structures

    Science.gov (United States)

    Zhou, Yuan-Qi; Zhan, Li-Hua

    2016-05-01

    Composite stiffened-structure consists of the skin and stringer has been widely used in aircraft fuselage and wings. The main purpose of the article is to detect the composite material reinforced structure accurately and explore the relationship between defect formation and structural elements or curing process. Based on ultrasonic phased array inspection technology, the regularity of defects in the manufacture of composite materials are obtained, the correlation model between actual defects and nondestructive testing are established. The article find that the forming quality of deltoid area in T-stiffened structure is obviously improved by pre-curing, the defects of hat-stiffened structure are affected by the mandrel. The results show that the ultrasonic phased array inspection technology can be an effectively way for the detection of composite stiffened-structures, which become an important means to control the defects of composite and improve the quality of the product.

  15. Rapid Response of Long-Standing, Treatment-Resistant Non-Catatonic Mutism in Paranoid Schizophrenia with Single ECT session.

    Science.gov (United States)

    Dar, Mansoor Ahmad; Rather, Yasir Hassan; Shah, Majid Shafi; Wani, Rayees Ahmad; Hussain, Arshad

    2014-11-01

    Mutism is a common manifestation of catatonia, but mutism due to other forms of psychopathology and neurological disorders have also been described. Although not common, long-standing mutism has also been a feature of non-catatonic schizophrenia and traditionally responds less to conventional therapies. We describe a rare case of paranoid schizophrenia presenting with continuous mutism for about 4 years. This 26-year-old male had symptoms of schizophrenia without catatonia. After failed trial of adequate pharmacotherapy and psychological intervention and considering his level of dysfunction, he was started on electroconvulsive therapy (ECT). To our surprise, he improved with a single session of ECT while he was on concurrent pharmacotherapy. We also discuss the possible explanation for this rapid effect of ECT in such clinical presentation. To our knowledge, this is the first case of non-catatonic mutism of schizophrenia of this long duration responding so promptly to ECT, although there are other reports as well in literature, but multiple ECT sessions were applied in those cases. Non-catatonic mutism is perhaps presenting as a cultural variant in this part of the world and whenever encountered, ECT should be an option. Further research should be carried out to validate this idea.

  16. Network Computer Technology. Phase I: Viability and Promise within NASA's Desktop Computing Environment

    Science.gov (United States)

    Paluzzi, Peter; Miller, Rosalind; Kurihara, West; Eskey, Megan

    1998-01-01

    Over the past several months, major industry vendors have made a business case for the network computer as a win-win solution toward lowering total cost of ownership. This report provides results from Phase I of the Ames Research Center network computer evaluation project. It identifies factors to be considered for determining cost of ownership; further, it examines where, when, and how network computer technology might fit in NASA's desktop computing architecture.

  17. Overview and Accomplishments of Advanced Mirror Technology Development Phase 2 (AMTD-2) Project

    Science.gov (United States)

    Stahl, H. Philip

    2015-01-01

    The Advance Mirror Technology Development (AMTD) project is in Phase 2 of a multiyear effort, initiated in FY12, to mature by at least a half TRL step critical technologies required to enable 4 meter or larger UVOIR space telescope primary mirror assemblies for both general astrophysics and ultra-high contrast observations of exoplanets. AMTD Phase 1 completed all of its goals and accomplished all of its milestones. AMTD Phase 2 started in 2014. Key accomplishments include deriving primary mirror engineering specifications from science requirements; developing integrated modeling tools and using those tools to perform parametric design trades; and demonstrating new mirror technologies via sub-scale fabrication and test. AMTD-1 demonstrated the stacked core technique by making a 43-cm diameter 400 mm thick 'biscuit-cut' of a 4-m class mirror. AMTD-2 is demonstrating lateral scalability of the stacked core method by making a 1.5 meter 1/3rd scale model of a 4-m class mirror.

  18. Coronagraph Focal-Plane Phase Masks Based on Photonic Crystal Technology: Recent Progress and Observational Strategy

    Science.gov (United States)

    Murakami, Naoshi; Nishikawa, Jun; Sakamoto, Moritsugu; Ise, Akitoshi; Oka, Kazuhiko; Baba, Naoshi; Murakami, Hiroshi; Tamura, Motohide; Traub, Wesley A.; Mawet, Dimitri; hide

    2012-01-01

    Photonic crystal, an artificial periodic nanostructure of refractive indices, is one of the attractive technologies for coronagraph focal-plane masks aiming at direct imaging and characterization of terrestrial extrasolar planets. We manufactured the eight-octant phase mask (8OPM) and the vector vortex mask (VVM) very precisely using the photonic crystal technology. Fully achromatic phase-mask coronagraphs can be realized by applying appropriate polarization filters to the masks. We carried out laboratory experiments of the polarization-filtered 8OPM coronagraph using the High-Contrast Imaging Testbed (HCIT), a state-of-the-art coronagraph simulator at the Jet Propulsion Laboratory (JPL). We report the experimental results of 10-8-level contrast across several wavelengths over 10% bandwidth around 800nm. In addition, we present future prospects and observational strategy for the photonic-crystal mask coronagraphs combined with differential imaging techniques to reach higher contrast. We proposed to apply a polarization-differential imaging (PDI) technique to the VVM coronagraph, in which we built a two-channel coronagraph using polarizing beam splitters to avoid a loss of intensity due to the polarization filters. We also proposed to apply an angular-differential imaging (ADI) technique to the 8OPM coronagraph. The 8OPM/ADI mode avoids an intensity loss due to a phase transition of the mask and provides a full field of view around central stars. We present results of preliminary laboratory demonstrations of the PDI and ADI observational modes with the phase-mask coronagraphs.

  19. Two-Phase Flow Technology Developed and Demonstrated for the Vision for Exploration

    Science.gov (United States)

    Sankovic, John M.; McQuillen, John B.; Lekan, Jack F.

    2005-01-01

    NASA s vision for exploration will once again expand the bounds of human presence in the universe with planned missions to the Moon and Mars. To attain the numerous goals of this vision, NASA will need to develop technologies in several areas, including advanced power-generation and thermal-control systems for spacecraft and life support. The development of these systems will have to be demonstrated prior to implementation to ensure safe and reliable operation in reduced-gravity environments. The Two-Phase Flow Facility (T(PHI) FFy) Project will provide the path to these enabling technologies for critical multiphase fluid products. The safety and reliability of future systems will be enhanced by addressing focused microgravity fluid physics issues associated with flow boiling, condensation, phase separation, and system stability, all of which are essential to exploration technology. The project--a multiyear effort initiated in 2004--will include concept development, normal-gravity testing (laboratories), reduced gravity aircraft flight campaigns (NASA s KC-135 and C-9 aircraft), space-flight experimentation (International Space Station), and model development. This project will be implemented by a team from the NASA Glenn Research Center, QSS Group, Inc., ZIN Technologies, Inc., and the Extramural Strategic Research Team composed of experts from academia.

  20. An Overview of SBIR Phase 2 Physical Sciences and Biomedical Technologies in Space

    Science.gov (United States)

    Nguyen, Hung D.; Steele, Gynelle C.

    2015-01-01

    Technological innovation is the overall focus of NASA's Small Business Innovation Research (SBIR) program. The program invests in the development of innovative concepts and technologies to help NASA's mission directorates address critical research and development needs for agency projects. This report highlights innovative SBIR Phase II projects from 2007-2012 specifically addressing areas in physical sciences and biomedical technologies in space, which is one of six core competencies at NASA Glenn Research Center. There are twenty two technologies featured with emphasis on a wide spectrum of applications such as reusable handheld electrolyte, sensor for bone markers, wideband single crystal transducer, mini treadmill for musculoskeletal, and much more. Each article in this report describes an innovation, technical objective, and highlights NASA commercial and industrial applications. This report serves as an opportunity for NASA personnel including engineers, researchers, and program managers to learn of NASA SBIR's capabilities that might be crosscutting into this technology area. As the result, it would cause collaborations and partnerships between the small companies and NASA Programs and Projects resulting in benefit to both SBIR companies and NASA.

  1. A simulation of orientation dependent, global changes in camera sensitivity in ECT

    International Nuclear Information System (INIS)

    Bieszk, J.A.; Hawman, E.G.; Malmin, R.E.

    1984-01-01

    ECT promises the abilities to: 1) observe radioisotope distributions in a patient without the summation of overlying activity to reduce contrast, and 2) measure quantitatively these distributions to further and more accurately assess organ function. Ideally, camera-based ECT systems should have a performance that is independent of camera orientation or gantry angle. This study is concerned with ECT quantitation errors that can arise from angle-dependent variations of camera sensitivity. Using simulated phantoms representative of heart and liver sections, the effects of sensitivity changes on reconstructed images were assessed both visually and quantitatively based on ROI sums. The sinogram for each test image was simulated with 128 linear digitization and 180 angular views. The global orientation-dependent sensitivity was modelled by applying an angular sensitivity dependence to the sinograms of the test images. Four sensitivity variations were studied. Amplitudes of 0% (as a reference), 5%, 10%, and 25% with a cosθ dependence were studied as well as a cos2θ dependence with a 5% amplitude. Simulations were done with and without Poisson noise to: 1) determine trends in the quantitative effects as a function of the magnitude of the variation, and 2) to see how these effects are manifested in studies having statistics comparable to clinical cases. For the most realistic sensitivity variation (cosθ, 5% ampl.), the ROIs chosen in the present work indicated changes of <0.5% in the noiseless case and <5% for the case with Poisson noise. The effects of statistics appear to dominate any effects due to global, sinusoidal, orientation-dependent sensitivity changes in the cases studied

  2. A naturalistic study of high-dose unilateral ECT among severely depressed inpatients: how does it work in the clinical practice?

    OpenAIRE

    Alves, Lucas P. C.; Freire, Thiago F. V.; Fleck, Marcelo P. A.; Rocha, Neusa S.

    2016-01-01

    Background Naturalistic studies can be useful tools to understand how an intervention works in the real clinical practice. This study aims to investigate the outcomes in a naturalistically treated depressed inpatients cohort, who were referred, or not, to unilateral ECT. Methods Depressed adults according to MINI admitted in a psychiatric unit were divided in unilateral ECT treated and non-ECT treated. Main outcomes were: depression improvement in Hamilton Rating Scale for Depression (HDRS-17...

  3. Impact of improved technology on industrial greenhouse-gas emissions in developing countries. Phase 1

    International Nuclear Information System (INIS)

    1997-06-01

    In response to a formal request by the Group of 77 and China, the United Nations Industrial Development Organization (UNIDO) initiated a study to identify opportunities to reduce the emissions of greenhouse gases from energy-intensive industries in developing countries. These sectors currently include iron and steel, petroleum refining, cement, paper and pulp and nitrogen fertilizers. The aim of this first phase was to describe: how energy is used in the energy-intensive industries in developing countries today; what current trends indicate for the future; the potential contribution of improved technologies and practices to moving toward more sustainable industrial production in developing countries, and to provide developing countries with an analytical tool for evaluating opportunities to limit industrial greenhouse-gas (GHG) emissions in their industrial sectors through the transfer of improved technologies and processes. The immediate objectives of Phase 1 were twofold: to provide information to developing countries in the form of an inventory of energy-efficient, best-available technologies and processes that can be used to abate greenhouse-gas emissions in the most energy-intensive industrial sub-sectors as well as cross-cutting measures applicable in a range of sub-sectors, and; to provide an analytical methodology in the form of a software tool that enables the user to evaluate and compare the costs, energy requirements, and greenhouse-gas emissions associated with scenarios of specific technology and process options. To meet these objectives, the first phase of the study comprised: a Report entitled Industrial Greenhouse-gas Emissions from Developing Countries; a Software Package containing, an Industrial Technology Inventory, and an Analysis Tool, and; Industry/country-specific Case Studies. The Report describes current energy use and greenhouse-gas emissions in energy-intensive industries in developing countries, and similar industries exemplifying good

  4. Investigation of Virtual Digital Human and Robotic Device Technology Merger Complimented by Haptics and Autostereoscopic Displays, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — As expected, the STTR Phase I investigation confirmed that the Digital Virtual Human (DVH) and Robonaut technologies can be merged, and that haptic and...

  5. IFMIF-KEP. International fusion materials irradiation facility key element technology phase report

    International Nuclear Information System (INIS)

    2003-03-01

    The International Fusion Materials Irradiation Facility (IFMIF) is an accelerator-based D-Li neutron source designed to produce an intense neutron field that will simulate the neutron environment of a D-T fusion reactor. IFMIF will provide a neutron flux equivalent to 2 MW/m 2 , 20 dpa/y in Fe, in a volume of 500 cm 3 and will be used in the development and qualification of materials for fusion systems. The design activities of IFMIF are performed under an IEA collaboration which began in 1995. In 2000, a three-year Key Element Technology Phase (KEP) of IFMIF was undertaken to reduce the key technology risk factors. This KEP report describes the results of the three-year KEP activities in the major project areas of accelerator, target, test facilities and design integration. (author)

  6. IFMIF-KEP. International fusion materials irradiation facility key element technology phase report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-03-01

    The International Fusion Materials Irradiation Facility (IFMIF) is an accelerator-based D-Li neutron source designed to produce an intense neutron field that will simulate the neutron environment of a D-T fusion reactor. IFMIF will provide a neutron flux equivalent to 2 MW/m{sup 2}, 20 dpa/y in Fe, in a volume of 500 cm{sup 3} and will be used in the development and qualification of materials for fusion systems. The design activities of IFMIF are performed under an IEA collaboration which began in 1995. In 2000, a three-year Key Element Technology Phase (KEP) of IFMIF was undertaken to reduce the key technology risk factors. This KEP report describes the results of the three-year KEP activities in the major project areas of accelerator, target, test facilities and design integration. (author)

  7. Evaluating acute effects of Electro Convulsive Therapy (ECT) on brain perfusion with Tc-99m HMPAO brain SPECT

    International Nuclear Information System (INIS)

    Ozguven, M.; Ozturk, E.; Gunalp, B.; Ozgen, F.; Bayhan, H.

    1992-01-01

    Regional cerebral blood flow (rCBF) was measured by Tc-99m HMPAO brain perfusion SPECT in 10 schizophrenes (8 male, 2 female) undergoing electro convulsive therapy (ECT) and the results were compared to those of baseline studies performed 3 days prior to the ECT application to evaluate its acute effect on brain perfusion. ECT caused a redistribution in the tracers uptake. There was a global increase in the rCBF and the uptake became more pronounced in the basal ganglia (left: 44.4+-1.9%, right: 43.1+-19%) and to a degree in the parietal (left: 26.5+-4.1%, right: 25+-3.4%) and temporal (left: 22.9+-4.3%, right: 22.3+-3.6%) cortices. When evaluating the effects of ECT on rCBF, factors like the used perfusion agent, the injection and rCBF measurement times, clinical status of the patient, duration of the illness, used therapeutic agents and variations in the ECT application should be taken into consideration because the obtained data may reflect either the ictal or post-ictal changes on rCBF and is specific to the group of patients undergoing the study

  8. Speed of recovery from disorientation may predict the treatment outcome of electroconvulsive therapy (ECT) in elderly patients with major depression.

    Science.gov (United States)

    Magne Bjølseth, Tor; Engedal, Knut; Šaltytė Benth, Jūratė; Bergsholm, Per; Strømnes Dybedal, Gro; Lødøen Gaarden, Torfinn; Tanum, Lars

    2016-01-15

    No study has previously investigated whether the speed of recovery from disorientation in the post-ictal period may predict the short-term treatment outcome of electroconvulsive therapy (ECT). This longitudinal cohort study included 57 elderly patients with unipolar or bipolar major depression, aged 60-85 years, treated with formula-based ECT. Treatment outcome was assessed weekly during the ECT course using the 17-item Hamilton Rating Scale for Depression (HRSD17). The post-ictal reorientation time (PRT) was assessed at the first and third treatments. Longer PRTs at the first and third treatments predicted a more rapid decline and a lower end-point in continuous HRSD17 scores (p=0.002 and 0.019, respectively). None of the patients who recovered from disorientation in less than 5 min met the remission criterion, defined as an HRSD17 score of 7 or less. A greater increment in stimulus dosage from the first to the third ECT session rendered a smaller relative decline in PRT (p<0.001). The limited number of subjects may reduce the generalizability of the findings. The speed of recovery from disorientation at the first and third sessions seems to be a predictor of the treatment outcome of formula-based ECT, at least in elderly patients with major depression. It remains to be clarified how the PRT may be utilized to guide stimulus dosing. Copyright © 2015 The Authors. Published by Elsevier B.V. All rights reserved.

  9. Differential response to right unilateral ECT in depressed patients: impact of comorbidity and severity of illness [ISRCTN39974945

    Directory of Open Access Journals (Sweden)

    Wahlbeck Kristian

    2002-01-01

    Full Text Available Abstract Background Recent electroconvulsive therapy (ECT efficacy studies of right unilateral (RUL ECT may not apply to real life clinics with a wide range of patients with major depressive episodes. Methods The study included two groups of patients. In addition to a homogeneous group of patients with major depression according to DSM-IV criteria with severity of the major depressive episode > 16 scores on 17-item Hamilton Rating Scale for Depression (HDRS (Group 1, n = 16, we included a heterogeneous group of patients with less severe major depressive episodes or with a variety of comorbid conditions (Group 2, n = 24. We randomly assigned the patients to an RUL ECT treatment dosed at 5 or 2.5 times seizure threshold with an intent-to-treat design. The outcomes measured blindly were HDRS, number of treatments, and Mini-Mental State Examination (MMSE. The patients were considered to have responded to treatment if the improvement in HDRS score was at least 60% and they had a total score of less than ten. Results The Group 2 patients responded poorer (8% vs. 63%, and had more often simultaneous worsening in their MMSE scores than Group 1 patients. The differences in the outcomes between the two different doses of RUL ECT treatment were not statistically significant. Conclusions ECT effectiveness seems to be lower in real-life heterogeneous patient groups than in homogeneous patient samples used in experimental efficacy trials.

  10. Clinical proteomics in kidney disease as an exponential technology: heading towards the disruptive phase.

    Science.gov (United States)

    Sanchez-Niño, Maria Dolores; Sanz, Ana B; Ramos, Adrian M; Fernandez-Fernandez, Beatriz; Ortiz, Alberto

    2017-04-01

    Exponential technologies double in power or processing speed every year, whereas their cost halves. Deception and disruption are two key stages in the development of exponential technologies. Deception occurs when, after initial introduction, technologies are dismissed as irrelevant, while they continue to progress, perhaps not as fast or with so many immediate practical applications as initially thought. Twenty years after the first publications, clinical proteomics is still not available in most hospitals and some clinicians have felt deception at unfulfilled promises. However, there are indications that clinical proteomics may be entering the disruptive phase, where, once refined, technologies disrupt established industries or procedures. In this regard, recent manuscripts in CKJ illustrate how proteomics is entering the clinical realm, with applications ranging from the identification of amyloid proteins in the pathology lab, to a new generation of urinary biomarkers for chronic kidney disease (CKD) assessment and outcome prediction. Indeed, one such panel of urinary peptidomics biomarkers, CKD273, recently received a Food and Drug Administration letter of support, the first ever in the CKD field. In addition, a must-read resource providing information on kidney disease-related proteomics and systems biology databases and how to access and use them in clinical decision-making was also recently published in CKJ .

  11. Recent progresses and achievements in photovoltaic-phase change material technology: A review with special treatment on photovoltaic thermal-phase change material systems

    International Nuclear Information System (INIS)

    Islam, M.M.; Pandey, A.K.; Hasanuzzaman, M.; Rahim, N.A.

    2016-01-01

    Highlights: • Broad summary of phase change materials based cooling for photovoltaic modules. • Compendium on phase change materials that are mostly used in photovoltaic systems. • Extension of heat availability period by 75–100% with phase change material. • Heat storage potential improves by 33–50% more with phase change material. • Future trend and move in photovoltaic thermal research. - Abstract: This communication lays out an appraisal on the recent works of phase change materials based thermal management techniques for photovoltaic systems with special focus on the so called photovoltaic thermal-phase change material system. Attempt has also been made to draw wide-ranging classification of both photovoltaic and photovoltaic thermal systems and their conventional cooling or heat harvesting methods developed so far so that feasible phase change materials application area in these systems can be pointed out. In addition, a brief literature on phase change materials with particular focus on their solar application has also been presented. Overview of the researches and studies establish that using phase change materials for photovoltaic thermal control is technically viable if some issues like thermal conductivity or phase stability are properly addressed. The photovoltaic thermal-phase change material systems are found to offer 33% (maximum 50%) more heat storage potential than the conventional photovoltaic-thermal water system and that with 75–100% extended heat availability period and around 9% escalation in output. Reduction in temperature attained with photovoltaic thermal-phase change material system is better than that with regular photovoltaic-thermal water system, too. Studies also show the potential of another emerging technology of photovoltaic thermal-microencapsulated phase change material system that makes use of microencapsulated phase change materials in thermal regulation. Future focus areas on photovoltaic thermal-phase change

  12. Airspace Technology Demonstration 2 (ATD-2) Phase 1 Concept of Use (ConUse)

    Science.gov (United States)

    Jung, Yoon; Engelland, Shawn; Capps, Richard; Coppenbarger, Rich; Hooey, Becky; Sharma, Shivanjli; Stevens, Lindsay; Verma, Savita; Lohr, Gary; Chevalley, Eric; hide

    2018-01-01

    This document presents an operational Concept of Use (ConUse) for the Phase 1 Baseline Integrated Arrival, Departure, and Surface (IADS) prototype system of NASA's Airspace Technology Demonstration 2 (ATD-2) sub-project, which began demonstration in 2017 at Charlotte Douglas International Airport (CLT). NASA is developing the IADS system under the ATD-2 sub-project in coordination with the Federal Aviation Administration (FAA) and aviation industry partners. The primary goal of ATD-2 sub-project is to improve the predictability and the operational efficiency of the air traffic system in metroplex environments, through the enhancement, development, and integration of the nation's most advanced and sophisticated arrival, departure, and surface prediction, scheduling, and management systems. The ATD-2 effort is a five-year research activity through 2020. The initial phase of the ATD-2 sub-project, which is the focus of this document, will demonstrate the Phase 1 Baseline IADS capability at CLT in 2017. The Phase 1 Baseline IADS capabilities of the ATD-2 sub-project consists of: (a) Strategic and tactical surface scheduling to improve efficiency and predictability of airport surface operations, (b) Tactical departure scheduling to enhance merging of departures into overhead traffic streams via accurate predictions of takeoff times and automated coordination between the Airport Traffic Control Tower (ATCT, or Tower) and the Air Route Traffic Control Center (ARTCC, or Center), (c) Improvements in departure surface demand predictions in Time Based Flow Management (TBFM), (d) A prototype Electronic Flight Data (EFD) system provided by the FAA via the Terminal Flight Data Manager (TFDM) early implementation effort, and (e) Improved situational awareness and demand predictions through integration with the Traffic Flow Management System (TFMS), TBFM, and TFDM (3Ts) for electronic data integration and exchange, and an on-screen dashboard displaying pertinent analytics in real

  13. Posicionamento ectópico de eletrodo de marcapasso Posicionamiento ectópico de electrodo de marcapaso Ectopic positioning of pacemaker electrode

    Directory of Open Access Journals (Sweden)

    Gildo Mota

    2010-05-01

    Full Text Available Apresentamos o caso de um paciente portador da forma cardíaca da doença de Chagas com disfunção ventricular esquerda e bloqueio atrioventricular de 2º grau Mobitz II, associados a vários episódios de síncope. Foi submetido a implante de marcapasso artificial definitivo dupla câmara. Após um ano do implante foi diagnosticado deslocamento de eletrodo atrial, sendo submetido a reimplante de eletrodo atrial. Após dois anos do primeiro procedimento cirúrgico, apresentava dispneia aos grandes esforços. Durante a avaliação, foi solicitado ecocardiograma, que detectou a presença de corpo estranho de características metálicas em câmaras cardíacas esquerdas, consistente com eletrodo de marcapasso ectópico.Referimos el caso de un paciente portador de la forma cardíaca de la enfermedad de Chagas con disfunción ventricular izquierda y bloqueo atrioventricular de 2° grado Mobitz II, asociados a varios episodios de síncope. Fue sometido a implante de marcapaso artificial definitivo doble cámara. Tras un año del implante se diagnosticó desplazamiento de electrodo atrial, con la sumisión del paciente a reimplante de electrodo atrial. Tras dos años del primer procedimiento quirúrgico, presentaba disnea a los grandes esfuerzos. Durante la evaluación, se solicitó ecocardiograma, que detectó presencia de cuerpo extraño de características metálicas en cámaras cardíacas izquierdas, de acuerdo con electrodo de marcapaso ectópico.The present case reports on a patient presenting the cardiac form of Chagas disease, with left ventricular dysfunction and second-degree atrioventricular block Mobitz type II, associated with several syncope episodes. The patient underwent a double-chamber definitive artificial pacemaker implant. One year after the implant, the displacement of the atrial electrode was diagnosed and the patient was submitted to re-implantation of the atrial electrode. Two years after the first surgical procedure, the

  14. Emerging technologies and approaches to minimize discharges into Lake Michigan, phase 2 module 4 report.

    Energy Technology Data Exchange (ETDEWEB)

    Negri, M.C.; Gillenwater, P.; Urgun-Demirtas, M.; Nnanna, G.; Yu, J.; Jannotta, I, (Energy Systems); (Purdue University Calumet)

    2012-04-19

    The Great Lakes Initiative (GLI) established the new water quality-based discharge criteria for mercury (Hg), thereby increasing the need for many municipal and industrial wastewater treatment plants in the region to lower the mercury in their effluents. Information on deployable technologies to satisfy these requirements for industrial and municipal dischargers in the Great lakes region is scarce. Therefore, BP funded Purdue University Calumet and Argonne to identify deployable Hg removal technologies to meet the GLI discharge criterion at its Whiting Refinery in Indiana. The joint PUC/Argonne project was divided into 2 phases. Results from Phase I and Phase II Modules 1-3 have been previously reported. This report summarizes the work done in Phase 3 Module 4, which consisted of the pilot scale testing of Hg removal technologies previously selected in Module 3. The pilot testing was an Argonne/PUC jointly directed project that was hosted at and funded by the BP refinery in Whiting, IN. As two organizations were involved in data analysis and interpretation, this report combines two independent sets of evaluations of the testing that was done, prepared respectively by Argonne and Purdue. Each organization retains sole responsibility for its respective analysis conclusions and recommendations. Based on Module 3 bench testing with pre-Effluent To Lake (pre-ETL) and clarifier effluent (CE) samples from the Whiting refinery, three different technologies were chosen for pilot testing: (1) Ultrafiltration (using GE ZeeWeed(reg sign) Technology, 0.04 {mu}m pore size and made up of PVDF) for particulate mercury removal; (2) Adsorption using Mersorb(reg sign) LW, a sulfur-impregnated activated carbon, for dissolved mercury removal if present and (3) The Blue PRO(reg sign) reactive filtration process for both particulate and dissolved (if present) mercury removal. The ultrafiltration and the Blue PRO(reg sign) reactive filtration pilot studies were done simultaneously at the

  15. Rigid polyurethane foam (RPF) technology for Countermine (Sea) Program -- Phase 1

    Energy Technology Data Exchange (ETDEWEB)

    Woodfin, R.L. [Sandia National Labs., Albuquerque, NM (United States). Exploratory Sensors and Munitions Dept.

    1997-01-01

    This Phase 1 report documents the results of one of the subtasks that was initiated under the joint Department of Energy (DOE)/Department of Defense (DoD) Memorandum of Understanding (MOU) for Countermine Warfare. The development of a foam that can neutralize mines and barriers and allow the safe passage of amphibious landing craft and vehicles was the objective of this subtask of the Sea Mine Countermeasures Technology program. This phase of the program concentrated on laboratory characterization of foam properties and field experiments with prefabricated foam blocks to determine the capability of RPF to adequately carry military traffic. It also established the flammability characteristics of the material under simulated operational conditions, extended the understanding of explosive cavity formation in RPF to include surface explosions, established the tolerance to typical military fluids, and the response to bullet impact. Many of the basic analyses required to establish the operational concept are reported. The initial field experiments were conducted at the Energetic Materials Research and Testing Center (EMRTC) of the New Mexico Institute of Mining and Technology, Socorro, NM in November 1995 through February 1996.

  16. IFMIF (International Fusion Materials Irradiation Facility) key element technology phase task description

    International Nuclear Information System (INIS)

    Ida, M.; Nakamura, H.; Sugimoto, M.; Yutani, T.; Takeuchi, H.

    2000-08-01

    In 2000, a 3 year Key Element technology Phase (KEP) of the International Fusion Materials Irradiation Facility (IFMIF) has been initiated to reduce the key technology risk factors needed to achieve continuous wave (CW) beam with the desired current and energy and to reach the corresponding power handling capabilities in the liquid lithium target system. In the KEP, the IFMIF team (EU, Japan, Russian Federation, US) will perform required tasks. The contents of the tasks are described in the task description sheet. As the KEP tasks, the IFMIF team have proposed 27 tasks for Test Facilities, 12 tasks for Target, 26 tasks for Accelerator and 18 tasks for Design Integration. The task description by RF is not yet available. The task items and task descriptions may be added or revised with the progress of KEP activities. These task description sheets have been compiled in this report. After 3 years KEP, the results of the KEP tasks will be reviewed. Following the KEP, 3 years Engineering Validation Phase (EVP) will continue for IFMIF construction. (author)

  17. Amplification of the Ect2 proto-oncogene and over-expression of Ect2 mRNA and protein in nickel compound and methylcholanthrene-transformed 10T1/2 mouse fibroblast cell lines

    International Nuclear Information System (INIS)

    Clemens, Farrah; Verma, Rini; Ramnath, Jamuna; Landolph, Joseph R.

    2005-01-01

    Occupational exposure of humans to mixtures of insoluble and soluble nickel (Ni) compounds correlates with increased incidences of lung, sinus, and pharyngeal tumors. Specific insoluble Ni compounds are carcinogenic to animals by inhalation and induce morphological and neoplastic transformation of cultured rodent cells. Our objectives were to (1) understand mechanisms of nickel ion-induced cell transformation, hence carcinogenesis and (2) develop biomarkers of nickel ion exposure and nickel ion-induced cell transformation. We isolated mRNAs from green nickel oxide (NiO), crystalline nickel monosulfide (NiS), and 3-methylcholanthrene (MCA) transformed C3H/10T1/2 Cl 8 cell lines, and determined by mRNA differential display that nine mRNA fragments were differentially expressed between Ni transformed and non-transformed 10T1/2 cell lines. Fragment R2-5 was expressed at higher steady-state levels in the transformed cell lines. R2-5 had 100% sequence identity to part of the coding region of Ect2, a mouse proto-oncogene encoding a GDP-GTP exchange factor. The 3.9-kb Ect2 transcript was expressed at 1.6- to 3.6-fold higher steady-state levels in four Ni transformed, and in two MCA-transformed, cell lines. Ect2 protein was expressed at 3.0- to 4.5-fold higher steady-state levels in Ni-transformed and in MCA-transformed cell lines. The Ect2 gene was amplified by 3.5- to 10-fold in Ni transformed, and by 2.5- to 3-fold in MCA transformed cell lines. Binding of nickel ions to enzymes of DNA synthesis likely caused amplification of the Ect2 gene. Ect2 gene amplification and over-expression of Ect2 mRNA and protein can cause microtubule disassembly and cytokinesis, contributing to induction and maintenance of morphological, anchorage-independent, and neoplastic transformation of these cell lines. Over-expression of Ect2 protein is a useful biomarker to detect exposure to nickel compounds and nickel ion-induced morphological and neoplastic cell transformation

  18. Multi-frequencies ECT algorithms to remove sodium noise in ISI of ferromagnetic SG tubes of FBR

    International Nuclear Information System (INIS)

    Mihalache, Ovidiu

    2012-01-01

    The paper presents developments and application of multi-frequency eddy current to be used during In-Service Inspection (ISI) of ferromagnetic steam generator (SG) tubes of Fast Breeder Reactors (FBR). Signal enhancement by means of multi-frequency ECT techniques are validated through 3D simulations of both signals and noise due to sodium forms around SG tube or SP. The purpose of such algorithms is to remove from ECT signal the electromagnetic noise resulting from sodium accumulated outside of SG tubes after SG vessel draining. Finite element method (FEM) simulations are used to analyse different sodium build-up scenarios observed experimentally, and to determine optimal multi-frequency ECT algorithms to suppress the most efficiently sodium noise. Also a new 'window multi-frequency' algorithm is applied and validated using 3-dimensional FEM simulations of SP and sodium forms. (author)

  19. The Effect of Previous Co-Worker Experience on the Survival of Knowledge Intensive Start-Ups

    DEFF Research Database (Denmark)

    Timmermans, Bram

    The aim of the paper is to investigate the effect of previous co-worker experience on the survival of knowledge intensive start-ups. For the empirical analysis I use the Danish Integrated Database of Labor Market Research (IDA). This longitudinal employer-employee database allows me to identify co-worker...... experience among all members of the firm. In addition, I will make a distinction between ordinary start-ups and entrepreneurial spin-offs. The results show that previous co-worker experience has a positive effect on new firm survival. This effect appears to be valid predominantly for ordinary start-ups than...

  20. Image-guided ultrasound phased arrays are a disruptive technology for non-invasive therapy

    Science.gov (United States)

    Hynynen, Kullervo; Jones, Ryan M.

    2016-01-01

    Focused ultrasound offers a non-invasive way of depositing acoustic energy deep into the body, which can be harnessed for a broad spectrum of therapeutic purposes, including tissue ablation, the targeting of therapeutic agents, and stem cell delivery. Phased array transducers enable electronic control over the beam geometry and direction, and can be tailored to provide optimal energy deposition patterns for a given therapeutic application. Their use in combination with modern medical imaging for therapy guidance allows precise targeting, online monitoring, and post-treatment evaluation of the ultrasound-mediated bioeffects. In the past there have been some technical obstacles hindering the construction of large aperture, high-power, densely-populated phased arrays and, as a result, they have not been fully exploited for therapy delivery to date. However, recent research has made the construction of such arrays feasible, and it is expected that their continued development will both greatly improve the safety and efficacy of existing ultrasound therapies as well as enable treatments that are not currently possible with existing technology. This review will summarize the basic principles, current statures, and future potential of image-guided ultrasound phased arrays for therapy. PMID:27494561

  1. Beam-pointing error compensation method of phased array radar seeker with phantom-bit technology

    Directory of Open Access Journals (Sweden)

    Qiuqiu WEN

    2017-06-01

    Full Text Available A phased array radar seeker (PARS must be able to effectively decouple body motion and accurately extract the line-of-sight (LOS rate for target missile tracking. In this study, the real-time two-channel beam pointing error (BPE compensation method of PARS for LOS rate extraction is designed. The PARS discrete beam motion principium is analyzed, and the mathematical model of beam scanning control is finished. According to the principle of the antenna element shift phase, both the antenna element shift phase law and the causes of beam-pointing error under phantom-bit conditions are analyzed, and the effect of BPE caused by phantom-bit technology (PBT on the extraction accuracy of the LOS rate is examined. A compensation method is given, which includes coordinate transforms, beam angle margin compensation, and detector dislocation angle calculation. When the method is used, the beam angle margin in the pitch and yaw directions is calculated to reduce the effect of the missile body disturbance and to improve LOS rate extraction precision by compensating for the detector dislocation angle. The simulation results validate the proposed method.

  2. Prediction of antidepressant response in both 2.25xthreshold RUL and fixed high dose RUL ECT.

    Science.gov (United States)

    Kimball, James N; Rosenquist, Peter B; Dunn, Aaron; McCall, Vaughn

    2009-01-01

    Some forms of electroconvulsive therapy (ECT) can result in generalized seizures that lack efficacy, therefore physiological markers of treatment adequacy would be helpful. EEG measures of seizure quality, such as EEG regularity and post-ictal suppression, have largely supplanted seizure duration as a marker for seizure adequacy, yet no predictive algorithm has gained wide clinical acceptance. Electrographic seizure durations of less than 25 s still prompt re-stimulation in many settings. We re-examined the utility of EEG seizure duration and other measures of EEG seizure as predictors of antidepressant response to right unilateral (RUL) ECT. Seventy-two adult patients with major depression were randomized to either titrated RUL ECT at 2.25 times initial seizure threshold or RUL ECT at a fixed dose of 403 mC. Intent-to-treat responder status (defined by 60% reduction in HRSD scores and final score of 12 or less after the last RUL ECT session) was identified as the dependent variable in a nominal logistic regression model including EEG seizure quality candidate variables, controlled for age and gender. A model including EEG seizure duration, EEG regularity, post-ictal suppression, age and gender and randomization status was significantly predictive of intent-to-treat responder status at treatment 2 (R2=.21 pmodel remained significant at these time points even when randomization status (titrated moderately suprathreshold vs. high fixed dosage) was removed (Treatment 2: R2=.18 p<.007; Treatment 4: R2=.23 p<.0007). EEG markers of seizure adequacy, including EEG seizure duration, are modestly predictive of antidepressant response for both titrated moderately suprathreshold and high fixed dosage RUL ECT.

  3. Development of technology on natural flaw fabrication and precise diagnosis for the major components in NPPs

    International Nuclear Information System (INIS)

    Han, Jung Ho; Choi, Myung Sik; Lee, Doek Hyun; Hur, Do Haeng

    2002-01-01

    The objective of this research is to develop a fabrication technology of natural flaw specimen of major components in NPPs and a technology of precise diagnosis for failure and degradation of components using natural flaw specimen. 1) Successful development of the natural flaw fabrication technology of SG tube 2) Evaluation of ECT signal and development of precise diagnosis using natural flaws. - Determination of length, depth, width, and multiplicity of fabricated natural flaws. - Informations about detectability and accuracy of ECT evaluation on various kinds of defects are collected when the combination of probe and frequency is changed. - An advanced technology for precise ECT evaluation is established. 3) Application of precise ECT diagnosis to failure analysis of SG tube in operation. - Fretting wear of KSNP SG. - ODSCC at tube expanded region of KSNP SG. - Determination of through/non-through wall of axial crack

  4. Feasibility and safety of electrochemotherapy (ECT) in the pancreas: a pre-clinical investigation

    International Nuclear Information System (INIS)

    Girelli, Roberto; Prejanò, Simona; Cataldo, Ivana; Corbo, Vincenzo; Martini, Lucia; Scarpa, Aldo; Claudio, Bassi

    2015-01-01

    Pancreatic ductal adenocarcinoma (PDAC) is a lethal disease generally refractory to standard chemotherapeutic agents; therefore improvements in anticancer therapies are mandatory. A major determinant of therapeutic resistance in PDAC is the poor drug delivery to neoplastic cells, mainly due to an extensive fibrotic reaction. Electroporation can be used in vivo to increase cancer cells’ local uptake of chemotherapeutics (electrochemotherapy, ECT), thus leading to an enhanced tumour response rate. In the present study, we evaluated the in vivo effects of reversible electroporation in normal pancreas in a rabbit experimental model. We also tested the effect of electroporation on pancreatic cancer cell lines in order to evaluate their increased sensitivity to chemotherapeutic agents. The application in vivo of the European Standard Operating Procedure of Electrochemotherapy (ESOPE) pulse protocol (1000 V/cm, 8 pulses, 100 μs, 5 KHz) was tested on the pancreas of normal New Zealand White Rabbits and short and long-term toxicity were assessed. PANC1 and MiaPaCa2 cell lines were tested for in vitro electrochemotherapy experiments with and without electroporation. Levels of cell permeabilization were determined by flow cytometry, whereas cell viability and drug (cisplatin and bleomycin) sensitivity of pulsed cells were measured by 3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl) -2H-tetrazolium (MTS) assay. In healthy rabbits, neither systemic nor local toxic effects due to the electroporation procedure were observed, demonstrating the safety of the optimized electric parameters in the treatment of the pancreas in vivo. In parallel, we established an optimized protocol for ECT in vitro that determined an enhanced anti-cancer effect of bleomycin and cisplatin with respect to treatment without electroporation. Our data suggest that electroporation is a safe procedure in the treatment of PDAC because it does not affect normal pancreatic parenchyma

  5. Development of scalable frequency and power Phase-Locked Loop in 130nm CMOS technology

    CERN Document Server

    Firlej, M; Idzik, M; Moron, J; Swientek, K

    2014-01-01

    The design and measurements results of a prototype very low power Phase-Locked Loop (PLL) ASIC for applications in readout systems of particle physics detectors are presented. The PLL was fabricated in 130 nm CMOS technology. It was designed and simulated for frequency range 10 MHz–3.5 GHz. Four division factors i.e. 6, 8, 10 and 16 were implemented in the PLL feedback loop. The main PLL block-voltage controlled oscillator (VCO) should work in 16 frequency ranges/modes, switched either manually or automatically. Preliminary measurements done in frequency range 20 MHz–1.6 GHz showed that the ASIC is functional and generates proper clock signal. The automatic VCO mode switching, one of the main design goals, was positively verified. Power consumption of around 0.6mW was measured at 1 GHz for a division factor equal to 10.

  6. Development of scalable frequency and power Phase-Locked Loop in 130 nm CMOS technology

    International Nuclear Information System (INIS)

    Firlej, M; Fiutowski, T; Idzik, M; Moroń, J; Świentek, K

    2014-01-01

    The design and measurements results of a prototype very low power Phase-Locked Loop (PLL) ASIC for applications in readout systems of particle physics detectors are presented. The PLL was fabricated in 130 nm CMOS technology. It was designed and simulated for frequency range 10 MHz–3.5 GHz. Four division factors i.e. 6, 8, 10 and 16 were implemented in the PLL feedback loop. The main PLL block-voltage controlled oscillator (VCO) should work in 16 frequency ranges/modes, switched either manually or automatically. Preliminary measurements done in frequency range 20 MHz–1.6 GHz showed that the ASIC is functional and generates proper clock signal. The automatic VCO mode switching, one of the main design goals, was positively verified. Power consumption of around 0.6 mW was measured at 1 GHz for a division factor equal to 10

  7. Quality investigation of surface mount technology using phase-shifting digital holography

    Science.gov (United States)

    Boonsri, Chantira; Buranasiri, Prathan

    2016-09-01

    Applying of a phase-shifting digital holography combined with compressive sensing to inspect the soldering quality of surface mount technology (SMT) which is a method for producing electronic circuits. In SMT, the components are mounted and connected with each other directly onto the surface of printed circuit boards (PCBs). By reconstructing the multidimensional images from a few samples of SMT, the results are solved by an optimization problem. In this paper, two problems have been concerned. The first one is to examine the devices and the soldering quality of connections between them, which are in micro-scaled. The second is to observe the effect of heat treatment of soldering material and devices on the surface mount board.

  8. Microencapsulation of a hydrophilic model molecule through vibration nozzle and emulsion phase inversion technologies.

    Science.gov (United States)

    Dorati, Rossella; Genta, Ida; Modena, Tiziana; Conti, Bice

    2013-01-01

    The goal of the present work was to evaluate and discuss vibration nozzle microencapsulation (VNM) technology combined to lyophilization, for the microencapsulation of a hydrophilic model molecule into a hydrophilic polymer. Fluorescein-loaded alginate microparticles prepared by VNM and emulsion phase inversion microencapsulation (EPIM) were lyophilized. Morphology, particle size distribution, lyophilized microspheres stability upon rehydration, drug loading and in vitro release were evaluated. Well-formed microspheres were obtained by the VNM technique, with higher yields of production (93.3-100%) and smaller particle size (d50138.10-158.00) than the EPIM microspheres. Rehydration upon lyophilization occurred in 30 min maintaining microsphere physical integrity. Fluorescein release was always faster from the microspheres obtained by VNM (364 h) than from those obtained by EPIM (504 h). The results suggest that VNM is a simple, easy to be scaled-up process suitable for the microencapsulation hydrophilic drugs.

  9. NASA/General Electric broad-specification fuels combustion technology program - Phase I results and status

    Science.gov (United States)

    Dodds, W. J.; Ekstedt, E. E.; Bahr, D. W.; Fear, J. S.

    1982-01-01

    A program is being conducted to develop the technology required to utilize fuels with broadened properties in aircraft gas turbine engines. The first phase of this program consisted of the experimental evaluation of three different combustor concepts to determine their potential for meeting several specific emissions and performance goals, when operated on broadened property fuels. The three concepts were a single annular combustor; a double annular combustor; and a short single annular combustor with variable geometry. All of these concepts were sized for the General Electric CF6-80 engine. A total of 24 different configurations of these concepts were evaluated in a high pressure test facility, using four test fuels having hydrogen contents between 11.8 and 14%. Fuel effects on combustor performance, durability and emissions, and combustor design features to offset these effects were demonstrated.

  10. CIS-based thin film PV technology. Phase 2 technical report, October 1996--October 1997

    Energy Technology Data Exchange (ETDEWEB)

    Tarrant, D.E.; Gay, R.R. [Siemens Solar Industries, Camarillo, CA (United States)

    1998-05-01

    This report describes work performed during Phase 2 of Siemens Solar Industries` (SSI) subcontract. Studies of the differences between reactors continued, resulting in adjustment of most of the process conditions to more closely mimic process conditions in the baseline reactor, thereby mitigating most of the process differences. SSI designed and built a new large-area reactor that is a more-direct scale-up of the baseline reactor. This reactor became operational during Phase 2 and was successfully demonstrated by initial circuit performance for 28-cm x 30-cm circuits averaging 10.6%, which compares favorably to the 10-cm x 10-cm baseline. SSI also defined a package for introductory products in support of the DOE long-term goal of systems that last at least 30 years. SSI also introduced two new CIS-based products: the product designations are ST5 and ST10, which are 21-cm x 33-cm/5-watt and 39-cm x 33-cm/10-watt modules designed for 12-V systems. NREL reports 9.6% aperture-area efficiency on the samples (11.2% circuit-plate aperture area), which is the highest efficiency of any commercial noncrystalline module. SSI also delivered a set of modules to NREL for a 1-kW array replacing an existing 1-kW array based on an older absorber formation technology. NREL reports stable performance and an unprecedented average efficiency of over 9%. A champion module was confirmed by NREL to produce 40.6 watts for a new world-record efficiency of 11.1% on 3,665 cm{sup 2}. This demonstrated efficiency exceeds the 1995 DOE efficiency goal for CIS prototype modules and exceeds the year 2000 efficiency goals for amorphous silicon and cadmium telluride technologies.

  11. NETWORK-CENTRIC TECHNOLOGIES FOR CONTROL OF THREE-PHASE NETWORK OPERATION MODES

    Directory of Open Access Journals (Sweden)

    Ye. I. Sokol

    2017-06-01

    Full Text Available Purpose. The development of the control system for three-phase network is based on intelligent technologies of network-centric control of heterogeneous objects. The introduction of unmanned aerial vehicles for monitoring of three-phase network increases the efficiency of management. Methodology. The case of decomposition of the instantaneous capacities of the fixed and variable components for 3-wire system. The features of power balance for the different modes of its functioning. It should be noted that symmetric sinusoidal mode is balanced and good, but really unbalanced, if the standard reactive power is not zero. To solve the problem of compensation is sufficient knowledge of the total value of the inactive components of full power (value of the inactive power without detail. The creation of a methodology of measurement and assessment will require knowledge of the magnitudes of each inactive component separately, which leads to the development of a unified approach to the measurement and compensation of inactive components of full power and the development of a generalized theory of power. Results. Procedure for the compensation of the current of zero sequence excludes from circuit the source, as the active component of instantaneous power of zero sequence, and a vector due to a current of zero sequence. This procedure is performed without time delay as it does not require integration. Only a 3–wire system with symmetrical voltage eliminates pulsations and symmetrization of the equivalent conductances of the phases of the task. Under asymmetric voltage, the power is different, its analysis requires the creation of a vector mathematical model of the energy processes of asymmetrical modes of 3–phase systems. Originality. The proposed method extends the basis of the vector method for any zero sequence voltages and shows that the various theories of instantaneous power three wired scheme due to the choice of a basis in a two

  12. Distributed system for parallel data processing of ECT signals for electromagnetic flaw detection in materials

    International Nuclear Information System (INIS)

    Guliashki, Vassil; Marinova, Galia

    2002-01-01

    The paper proposes a distributed system for parallel data processing of ECT signals for flaw detection in materials. The measured data are stored in files on a host computer, where a JAVA server is located. The host computer is connected through Internet to a set of client computers, distributed geographically. The data are distributed from the host computer by means of the JAVA server to the client computers according their requests. The software necessary for the data processing is installed on each client computer in advance. The organization of the data processing on many computers, working simultaneously in parallel, leads to great time reducing, especially in cases when huge amount of data should be processed in very short time. (Author)

  13. Escala do comportamento do treinador: versão treinador (ECT-T e versão atleta (ECT-A: o que o treinador diz é confirmado pelos seus atletas? Scale of coach behavior: version coach (ECT-T and version athlete (ECT-A: what the coach says is confirmed by its athletes?

    Directory of Open Access Journals (Sweden)

    Luiz Carlos Couto de Albuquerque Moraes

    2010-03-01

    Full Text Available Objetivou-se verificar o nível de associação entre as percepções de atletas e treinadores de esportes coletivos e individuais nas seis dimensões do comportamento do treinador - Treinamento Físico (TF, Treinamento Técnico (TT, Preparação Mental (PM, Estabelecimento de Objetivos (EO, Reforço Pessoal Positivo (RPP, Reforço Pessoal Negativo (RPN - acessado pela Escala do Comportamento do Treinador - Versão Treinador (ECT-T e Versão Atleta (ECT-A. Participaram 181 atletas (114 homens e 67 mulheres de nove modalidades esportivas com idade média de 17,15 anos (± 1,48 e seus respectivos treinadores (N = 32, todos do sexo masculino, com idade média de 32,88 (± 8,91. Treinadores e atletas responderam aos 38 itens de mesmo conteúdo dos questionários mencionados. A correlação não-paramétrica de Spearman mostrou a inexistência de associação significativa, ao nível a = 0,05, entre as percepções treinadores e atletas de modalidades coletivas nas dimensões TT, PM, EO e RPP. Entre treinadores e atletas de modalidades individuais também não foram verificadas associações significativas em cinco dimensões: TF, TT, PM, EO e RPP. Dentre outras razões, a baixa compatibilidade entre as percepções de atletas treinadores, pode estar relacionada a falhas no processo de organização do treinamento. Além disso, o relacionamento de cada treinador com os atletas sob o seu comando parece informar mais do que a simples categorização: modalidades coletivas versus individuaisThe purpose of this study was to verify the level of association between athletes and their coaches' perceptions, according to the kind of sport (individual or group, in the six dimensions of coaching behavior - Physical Training (PT; Technical Training (TT; Mental Preparation (MP; Goal Setting (GS; Personal Positive Rapport (PPR Personal Negative Rapport (PNR - accessed by the two Brazilian versions of Coaching Behavior Scale for Sport: Coaches (ECT-T and Athletes

  14. Simulation and design of ECT differential bobbin probes for the inspection of cracks in bolts

    International Nuclear Information System (INIS)

    Ra, S W; Im, K H; Woo, Y D; Lee, S G; Kim, H J; Song, S J; Kim, S K; Cho, Y T; Jung, J A

    2015-01-01

    All Various defects could be generated in bolts for a use of oil filters for the manufacturing process and then may affect to the safety and quality in bolts. Also, fine defects may be imbedded in oil filter system during multiple forging manufacturing processes. So it is very important that such defects be investigated and screened during the multiple manufacturing processes. Therefore, in order effectively to evaluate the fine defects, the design parameters for bobbin-types were selected under a finite element method (FEM) simulations and Eddy current testing (ECT). Especially the FEM simulations were performed to make characterization in the crack detection of the bolts and the parameters such as number of turns of the coil, the coil size and applied frequency were calculated based on the simulation results. (paper)

  15. Innovative fossil fuel fired vitrification technology for soil remediation. Phase 1

    Energy Technology Data Exchange (ETDEWEB)

    1994-01-01

    Vortec has successfully completed Phase 1 of the ``Innovative Fossil Fuel Fired Vitrification Technology for Soil Remediation`` program. The Combustion and Melting System (CMS) has processed 7000 pounds of material representative of contaminated soil that is found at DOE sites. The soil was spiked with Resource Conservation and Recovery Act (RCRA) metals surrogates, an organic contaminant, and a surrogate radionuclide. The samples taken during the tests confirmed that virtually all of the radionuclide was retained in the glass and that it did not leach to the environment-as confirmed by both ANS 16.1 and Toxicity Characteristic Leaching Procedure (TCLP) testing. The organic contaminant, anthracene, was destroyed during the test with a Destruction and Removal Efficiency (DRE) of at least 99.99%. RCRA metal surrogates, that were in the vitrified product, were retained and did not leach to the environment as confirmed by the TCLP testing. Semi-volatile RCRA metal surrogates were captured by the Air Pollution Control (APC) system, and data on the amount of metal oxide particulate and the chemical composition of the particulate were established for use in the Phase 2 APC subsystem design.

  16. Microfluidic EBG Sensor Based on Phase-Shift Method Realized Using 3D Printing Technology

    Directory of Open Access Journals (Sweden)

    Vasa Radonić

    2017-04-01

    Full Text Available In this article, we propose a novel microfluidic microstrip electromagnetic band gap (EBG sensor realized using cost-effective 3D printing technology. Microstrip sensor allows monitoring of the fluid properties flowing in the microchannel embedded between the microstrip line and ground plane. The sensor’s operating principle is based on the phase-shift method, which allows the characterization at a single operating frequency of 6 GHz. The defected electromagnetic band gap (EBG structure is realized as a pattern in the microstrip ground plane to improve sensor sensitivity. The designed microfluidic channel is fabricated using a fused deposition modelling (FDM 3D printing process without additional supporting layers, while the conductive layers are realized using sticky aluminium tape. The measurement results show that the change of permittivity of the fluid in the microfluidic channel from 1 to 80 results in the phase-shift difference of almost 90°. The potential application is demonstrated through the implementation of a proposed sensor for the detection of toluene concentration in toluene–methanol mixture where various concentrations of toluene were analysed.

  17. Microfluidic EBG Sensor Based on Phase-Shift Method Realized Using 3D Printing Technology.

    Science.gov (United States)

    Radonić, Vasa; Birgermajer, Slobodan; Kitić, Goran

    2017-04-18

    In this article, we propose a novel microfluidic microstrip electromagnetic band gap (EBG) sensor realized using cost-effective 3D printing technology. Microstrip sensor allows monitoring of the fluid properties flowing in the microchannel embedded between the microstrip line and ground plane. The sensor's operating principle is based on the phase-shift method, which allows the characterization at a single operating frequency of 6 GHz. The defected electromagnetic band gap (EBG) structure is realized as a pattern in the microstrip ground plane to improve sensor sensitivity. The designed microfluidic channel is fabricated using a fused deposition modelling (FDM) 3D printing process without additional supporting layers, while the conductive layers are realized using sticky aluminium tape. The measurement results show that the change of permittivity of the fluid in the microfluidic channel from 1 to 80 results in the phase-shift difference of almost 90°. The potential application is demonstrated through the implementation of a proposed sensor for the detection of toluene concentration in toluene-methanol mixture where various concentrations of toluene were analysed.

  18. Free-piston Stirling engine conceptual design and technologies for space power, Phase 1. Final Report

    International Nuclear Information System (INIS)

    Penswick, L.B.; Beale, W.T.; Wood, J.G.

    1990-01-01

    As part of the SP-100 program, a phase 1 effort to design a free-piston Stirling engine (FPSE) for a space dynamic power conversion system was completed. SP-100 is a combined DOD/DOE/NASA program to develop nuclear power for space. This work was completed in the initial phases of the SP-100 program prior to the power conversion concept selection for the Ground Engineering System (GES). Stirling engine technology development as a growth option for SP-100 is continuing after this phase 1 effort. Following a review of various engine concepts, a single-cylinder engine with a linear alternator was selected for the remainder of the study. The relationships of specific mass and efficiency versus temperature ratio were determined for a power output of 25 kWe. This parametric study was done for a temperature ratio range of 1.5 to 2.0 and for hot-end temperatures of 875 K and 1075 K. A conceptual design of a 1080 K FPSE with a linear alternator producing 25 kWe output was completed. This was a single-cylinder engine designed for a 62,000 hour life and a temperature ratio of 2.0. The heat transport systems were pumped liquid-metal loops on both the hot and cold ends. These specifications were selected to match the SP-100 power system designs that were being evaluated at that time. The hot end of the engine used both refractory and superalloy materials; the hot-end pressure vessel featured an insulated design that allowed use of the superalloy material. The design was supported by the hardware demonstration of two of the component concepts - the hydrodynamic gas bearing for the displacer and the dynamic balance system. The hydrodynamic gas bearing was demonstrated on a test rig. The dynamic balance system was tested on the 1 kW RE-1000 engine at NASA Lewis

  19. New Cloud and Precipitation Research Avenues Enabled by low-cost Phased-array Radar Technology

    Science.gov (United States)

    Kollias, P.; Oue, M.; Fridlind, A. M.; Matsui, T.; McLaughlin, D. J.

    2017-12-01

    For over half a century, radars operating in a wide range of frequencies have been the primary source of observational insights of clouds and precipitation microphysics and dynamics and contributed to numerous significant advancements in the field of cloud and precipitation physics. The development of multi-wavelength and polarization diversity techniques has further strengthened the quality of microphysical and dynamical retrievals from radars and has assisted in overcoming some of the limitations imposed by the physics of scattering. Atmospheric radars have historically employed a mechanically-scanning dish antenna and their ability to point to, survey, and revisit specific points or regions in the atmosphere is limited by mechanical inertia. Electronically scanned, or phased-array, radars capable of high-speed, inertialess beam steering, have been available for several decades, but the cost of this technology has limited its use to military applications. During the last 10 years, lower power and lower-cost versions of electronically scanning radars have been developed, and this presents an attractive and affordable new tool for the atmospheric sciences. The operational and research communities are currently exploring phased array advantages in signal processing (i.e. beam multiplexing, improved clutter rejection, cross beam wind estimation, adaptive sensing) and science applications (i.e. tornadic storm morphology studies). Here, we will present some areas of atmospheric research where inertia-less radars with ability to provide rapid volume imaging offers the potential to advance cloud and precipitation research. We will discuss the added value of single phased-array radars as well as networks of these radars for several problems including: multi-Doppler wind retrieval techniques, cloud lifetime studies and aerosol-convection interactions. The performance of current (dish) and future (e-scan) radar systems for these atmospheric studies will be evaluated using

  20. An Overview of Communications Technology and Development Efforts for 2015 SBIR Phase I

    Science.gov (United States)

    Nguyen, Hung D.; Steele, Gynelle C.

    2017-01-01

    This report highlights innovative SBIR 2015 Phase I projects specifically addressing areas in Communications Technology and Development which is one of six core competencies at NASA Glenn Research Center. There are fifteen technologies featured with emphasis on a wide spectrum of applications such as novel solid state lasers for space-based water vapor dial; wide temperature, high voltage and energy density capacitors for aerospace exploration; instrument for airborne measurement of carbonyl sulfide; high-power tunable seed laser for methane Lidar transmitter; ROC-rib deployable ka-band antenna for nanosatellites; a SIC-based microcontroller for high-temperature in-situ instruments and systems; improved yield, performance and reliability of high-actuator-count deformable mirrors; embedded multifunctional optical sensor system; switching electronics for space-based telescopes with advanced AO systems; integrated miniature DBR laser module for Lidar instruments; and much more. Each article in this booklet describes an innovation, technical objective, and highlights NASA commercial and industrial applications. space-based water vapor dial; wide temperature, high voltage and energy density capacitors foraerospace exploration; instrument for airborne measurement of carbonyl sulfide; high-power tunable seed laser formethane Lidar transmitter; ROC-rib deployable ka-band antenna for nanosatellites.

  1. Investigation of HV/HR-CMOS technology for the ATLAS Phase-II Strip Tracker Upgrade

    Science.gov (United States)

    Fadeyev, V.; Galloway, Z.; Grabas, H.; Grillo, A. A.; Liang, Z.; Martinez-Mckinney, F.; Seiden, A.; Volk, J.; Affolder, A.; Buckland, M.; Meng, L.; Arndt, K.; Bortoletto, D.; Huffman, T.; John, J.; McMahon, S.; Nickerson, R.; Phillips, P.; Plackett, R.; Shipsey, I.; Vigani, L.; Bates, R.; Blue, A.; Buttar, C.; Kanisauskas, K.; Maneuski, D.; Benoit, M.; Di Bello, F.; Caragiulo, P.; Dragone, A.; Grenier, P.; Kenney, C.; Rubbo, F.; Segal, J.; Su, D.; Tamma, C.; Das, D.; Dopke, J.; Turchetta, R.; Wilson, F.; Worm, S.; Ehrler, F.; Peric, I.; Gregor, I. M.; Stanitzki, M.; Hoeferkamp, M.; Seidel, S.; Hommels, L. B. A.; Kramberger, G.; Mandić, I.; Mikuž, M.; Muenstermann, D.; Wang, R.; Zhang, J.; Warren, M.; Song, W.; Xiu, Q.; Zhu, H.

    2016-09-01

    ATLAS has formed strip CMOS project to study the use of CMOS MAPS devices as silicon strip sensors for the Phase-II Strip Tracker Upgrade. This choice of sensors promises several advantages over the conventional baseline design, such as better resolution, less material in the tracking volume, and faster construction speed. At the same time, many design features of the sensors are driven by the requirement of minimizing the impact on the rest of the detector. Hence the target devices feature long pixels which are grouped to form a virtual strip with binary-encoded z position. The key performance aspects are radiation hardness compatibility with HL-LHC environment, as well as extraction of the full hit position with full-reticle readout architecture. To date, several test chips have been submitted using two different CMOS technologies. The AMS 350 nm is a high voltage CMOS process (HV-CMOS), that features the sensor bias of up to 120 V. The TowerJazz 180 nm high resistivity CMOS process (HR-CMOS) uses a high resistivity epitaxial layer to provide the depletion region on top of the substrate. We have evaluated passive pixel performance, and charge collection projections. The results strongly support the radiation tolerance of these devices to radiation dose of the HL-LHC in the strip tracker region. We also describe design features for the next chip submission that are motivated by our technology evaluation.

  2. Erupción ectópica del canino superior y sus efectos sobre la pulpa dentaria.

    OpenAIRE

    Siragusa, Martha; Fruttero, A

    2005-01-01

    Presentacion de Casos Clínicos Recibido: Junio 2005 Aceptado: Agosto 2005 Tratamiento en un caso de reabsorción cemento dentinaria externa, causado por la presión ejercida por un canino en erupción ectópica.

  3. Visies op ECT: een vergelijking tussen oordelen van patiënten, familieleden en behandelaren over elektroconvulsie-therapie

    NARCIS (Netherlands)

    A.M. Koster (Annemiek)

    1992-01-01

    textabstractIn het voorjaar van 1986 is de Geneeskundige Inspectie voor de Geestelijke Volksgezondheid (GIGV) een onderzoek gestart naar ervaringen van patienten met elektroconvulsie-therapie (ECT). Dit onderzoek werd in 1991 afgesloten met een rapport (GIGV, 1991). De aanleiding tot dat onderzoek

  4. The implications of megatrends in information and communication technology and transportation for changes in global physical activity

    DEFF Research Database (Denmark)

    Pratt, Michael; Sarmiento, Olga L; Montes, Felipe

    2012-01-01

    Physical inactivity accounts for more than 3 million deaths per year, most from non-communicable diseases in low-income and middle-income countries. We used reviews of physical activity interventions and a simulation model to examine how megatrends in information and communication technology...... and transportation directly and indirectly aff ect levels of physical activity across countries of low, middle, and high income. The model suggested that the direct and potentiating eff ects of information and communication technology, especially mobile phones, are nearly equal in magnitude to the mean eff ects...

  5. Phase-chronometric measuring systems for the provision of technological processes and diagnostics of the production of electromechanical engineering systems

    Directory of Open Access Journals (Sweden)

    Tumakova Ekaterina

    2017-01-01

    Full Text Available In paper the main problems and objectives assessment of the current technical condition of the machine-building equipment are considered. Modern measuring systems used in engineering analysis. The paper considers a phase-chronometric information technology-metrological support for the evaluation of the technical condition of the synchronous electromechanical systems on the example of turbine CHP. Analysis of the main problems in the diagnosis of electromechanical systems is given. Phase-chronometric method as a basis for building a new system of diagnosis of electromechanical systems reviewed. The paper describes the main elements of technology, assessment of the economic effects of its introduction in the industry.

  6. Applying Ultrasonic Phased Array Technology to Examine Austenitic Coarse-Grained Structures for Light Water Reactor Piping

    International Nuclear Information System (INIS)

    Anderson, Michael T.; Cumblidge, Stephen E.; Doctor, Steven R.

    2003-01-01

    Pacific Northwest Laboratory is evaluating the capabilities and limitations of phased array (PA) technology to detect service-type flaws in coarse-grained austenitic piping structures. The work is being sponsored by the U.S. Nuclear Regulatory Commission, Office of Research. This paper presents initial work involving the use of PA technology to determine the effectiveness of detecting and accurately characterizing flaws on the far-side of austenitic piping welds

  7. Phase-change materials for non-volatile memory devices: from technological challenges to materials science issues

    Science.gov (United States)

    Noé, Pierre; Vallée, Christophe; Hippert, Françoise; Fillot, Frédéric; Raty, Jean-Yves

    2018-01-01

    Chalcogenide phase-change materials (PCMs), such as Ge-Sb-Te alloys, have shown outstanding properties, which has led to their successful use for a long time in optical memories (DVDs) and, recently, in non-volatile resistive memories. The latter, known as PCM memories or phase-change random access memories (PCRAMs), are the most promising candidates among emerging non-volatile memory (NVM) technologies to replace the current FLASH memories at CMOS technology nodes under 28 nm. Chalcogenide PCMs exhibit fast and reversible phase transformations between crystalline and amorphous states with very different transport and optical properties leading to a unique set of features for PCRAMs, such as fast programming, good cyclability, high scalability, multi-level storage capability, and good data retention. Nevertheless, PCM memory technology has to overcome several challenges to definitively invade the NVM market. In this review paper, we examine the main technological challenges that PCM memory technology must face and we illustrate how new memory architecture, innovative deposition methods, and PCM composition optimization can contribute to further improvements of this technology. In particular, we examine how to lower the programming currents and increase data retention. Scaling down PCM memories for large-scale integration means the incorporation of the PCM into more and more confined structures and raises materials science issues in order to understand interface and size effects on crystallization. Other materials science issues are related to the stability and ageing of the amorphous state of PCMs. The stability of the amorphous phase, which determines data retention in memory devices, can be increased by doping the PCM. Ageing of the amorphous phase leads to a large increase of the resistivity with time (resistance drift), which has up to now hindered the development of ultra-high multi-level storage devices. A review of the current understanding of all these

  8. The development of coal-based technologies for Department of Defense facilities: Phase 1 final report. Volume 1: Technical report

    Energy Technology Data Exchange (ETDEWEB)

    Miller, B.G.; Morrison, J.L.; Pisupati, S.V. [Pennsylvania State Univ., University Park, PA (United States). Energy and Fuels Research Center] [and others

    1997-01-31

    The first phase of a three-phase project investigating the development of coal-based technologies for Department of Defense facilities has been completed. The objectives of the project are to: decrease DOD`s dependence on foreign oil and increase its use of coal; promote public and private sector deployment of technologies for utilizing coal-based fuels in oil-designed combustion equipment; and provide a continuing environment for research and development of coal-based fuel technologies for small-scale applications at a time when market conditions in the US are not favorable for the introduction of coal-fired equipment in the commercial and industrial capacity ranges. The Phase 1 activities were focused on developing clean, coal-based combustion technologies for the utilization of both micronized coal-water mixtures (MCWMs) and dry, micronized coal (DMC) in fuel oil-designed industrial boilers. The specific objective in Phase 1 was to deliver fully engineered retrofit options for a fuel oil-designed watertube boiler located on a DOD installation to fire either MCWM or DMC. This was achieved through a project consisting of fundamental, pilot-sale, and demonstration-scale activities investigating coal beneficiation and preparation, and MCWM and DMC combustion performance. In addition, detailed engineering designs and an economic analysis were conducted for a boiler located at the Naval Surface Warfare Center, near Crane, Indiana. Results are reported on MCWM and DMC combustion performance evaluation; engineering design; and cost/economic analysis.

  9. 60 GHz 5-bit digital controlled phase shifter in a digital 40 nm CMOS technology without ultra-thick metals

    NARCIS (Netherlands)

    Gao, H.; Ying, K.; Matters-Kammerer, M.K.; Harpe, P.; Wang, B.; Liu, B.; Serdijn, W.A.; Baltus, P.G.M.

    2016-01-01

    A 5-bit digital controlled switch-type passive phase shifter realised in a 40 nm digital CMOS technology without ultra-thick metals for the 60 GHz Industrial, Scientific and Medical (ISM) band is presented. A patterned shielding with electromagnetic bandgap structure and a stacked metals method to

  10. Taiwan industrial cooperation program technology transfer for low-level radioactive waste final disposal - phase I.

    Energy Technology Data Exchange (ETDEWEB)

    Knowlton, Robert G.; Cochran, John Russell; Arnold, Bill Walter; Jow, Hong-Nian; Mattie, Patrick D.; Schelling, Frank Joseph Jr. (; .)

    2007-01-01

    Sandia National Laboratories and the Institute of Nuclear Energy Research, Taiwan have collaborated in a technology transfer program related to low-level radioactive waste (LLW) disposal in Taiwan. Phase I of this program included regulatory analysis of LLW final disposal, development of LLW disposal performance assessment capabilities, and preliminary performance assessments of two potential disposal sites. Performance objectives were based on regulations in Taiwan and comparisons to those in the United States. Probabilistic performance assessment models were constructed based on limited site data using software including GoldSim, BLT-MS, FEHM, and HELP. These software codes provided the probabilistic framework, container degradation, waste-form leaching, groundwater flow, radionuclide transport, and cover infiltration simulation capabilities in the performance assessment. Preliminary performance assessment analyses were conducted for a near-surface disposal system and a mined cavern disposal system at two representative sites in Taiwan. Results of example calculations indicate peak simulated concentrations to a receptor within a few hundred years of LLW disposal, primarily from highly soluble, non-sorbing radionuclides.

  11. Avaliando a eficiência das lojas da ECT do Rio Grande do Sul

    Directory of Open Access Journals (Sweden)

    Borenstein Denis

    2003-01-01

    Full Text Available As empresas postais do mundo inteiro têm procurado métodos capazes de dar sustentação a suas práticas para garantia e ampliação de seus mercados. A Empresa Brasileira de Correios e Telégrafos (ECT, criada em 1969, configurada com muitas lojas similares em todo o Brasil, as quais prestam e comercializam um conjunto de produtos e serviços semelhantes, mas que utilizam recursos diversos em intensidade diferente, possui sua atual avaliação de desempenho das lojas centrada em um único fator econômico financeiro, denominado de Índice de Receitas e Despesas (R/D. Esse índice não considera fatores que estão sendo utilizados pelas lojas, fora da visão financeira. Dessa forma, neste artigo, propõe-se avaliar um conjunto de lojas da ECT do Rio Grande do Sul por meio de modelagem matemática, utilizando a técnica Data Envelopment Analysis (DEA - Análise Envoltória de Dados, que possibilita a inclusão de outras variáveis fora da visão econômica. Este trabalho tem por objetivo: 1. definir que variáveis podem ser utilizadas para a avaliação das lojas; 2. definir um conjunto de lojas similares, que executam as mesmas funções e que se diferenciam somente na intensidade da utilização dos recursos; 3. gerar, por meio da técnica, os resultados da avaliação, obtidos a partir dos fatores quantitativos definidos, realizando análises de sensibilidades; e 4. propiciar aos administradores um referencial para apoio à decisão. A utilização da técnica tornou possível: identificar fatores usados de forma distinta nas lojas; identificar práticas utilizadas pelas lojas 100% eficientes, que podem contribuir para as lojas não eficientes; e permitir e encorajar a participação dos gestores locais na alteração e extensão do modelo, levando em conta as características das lojas.

  12. Next Generation Metallic Iron Nodule Technology in Electric Arc Steelmaking - Phase II

    Energy Technology Data Exchange (ETDEWEB)

    Donald R. Fosnacht; Iwao Iwasaki; Richard F. Kiesel; David J. Englund; David W. Hendrickson; Rodney L. Bleifuss

    2010-12-22

    -bituminous coal as a reductant. From over 4000 laboratory tube and box furnace tests, it was established that the correct combination of additives, fluxes, and reductant while controlling the concentration of CO and CO2 in the furnace atmosphere (a) lowers the operating temperature, (b) decreases the use of reductant coal (c) generates less micro nodules of iron, and (d) promotes desulphurization. The laboratory scale work was subsequently verified on 12.2 m (40 ft) long pilot scale furnace. High quality NRI could be produced on a routine basis using the pilot furnace facility with energy provided from oxy-gas or oxy-coal burner technologies. Specific strategies were developed to allow the use of sub-bituminous coals both as a hearth material and as part of the reaction mixture. Computational Fluid Dynamics (CFD) modeling was used to study the overall carbothermic reduction and smelting process. The movement of the furnace gas on a pilot hearth furnace and larger simulated furnaces and various means of controlling the gas atmosphere were evaluated. Various atmosphere control methods were identified and tested during the course of the investigation. Based on the results, the appropriate modifications to the furnace were made and tested at the pilot scale. A series of reduction and smelting tests were conducted to verify the utility of the processing conditions. During this phase, the overall energy use characteristics, raw materials, alternative fuels, and the overall economics predicted for full scale implementation were analyzed. The results indicate that it should be possible to lower reaction temperatures while simultaneously producing low sulfur, high carbon NRI if the right mix chemistry and atmosphere are employed. Recommendations for moving the technology to the next stage of commercialization are presented.

  13. An update on DOE's Phase II and Phase III mercury control technology R and D program

    Energy Technology Data Exchange (ETDEWEB)

    Feeley, Thomas J. III.; Brickett, Lynn A.; Miller, Charles E. [National Energy Technology Laboratory, U.S. Department of Energy, 626 Cochrans Mill Road, Pittsburgh, PA 15236 (United States); Jones, Andrew P.; Murphy, James T. [Science Applications International Corporation, National Energy Technology Laboratory, Pittsburgh, PA 15236 (United States); O' Palko, B. Andrew [National Energy Technology Laboratory, U.S. Department of Energy, 3610 Collins Ferry Road, Morgantown, WV 26507 (United States)

    2009-11-15

    The U.S. Department of Energy's National Energy Technology Laboratory, under the Office of Fossil Energy's Innovations for Existing Plants Program, carried out a comprehensive Hg research and development program for coal-fired power generation facilities since the mid-1990s. Working collaboratively with the U.S. Environmental Protection Agency, the Electric Power Research Institute, power plant operators, state and local agencies, and a host of research organizations and academic institutions, the Program identified the major factors that affect mercury speciation and capture in coal combustion flue gas and funneled this knowledge into the development of a suite of mercury control technologies for the diverse fleet of U.S. coal-fired power plants. The high performance observed during full-scale field testing has given coal-fired power plant operators the confidence to begin deploying technology. As of March 2009, more than 130 full-scale activated carbon injection systems have been ordered by the U.S. coal-fired power generators. These contracts include both new and retrofit installations and represent over 55 GW of coal-based electric generating capacity. (author)

  14. [Non invasive intracranial hyperthermia with Electric Capacitive Transference -ECT- Intratumoral and cerebral thermometry results].

    Science.gov (United States)

    Ley-Valle, A

    2003-02-01

    The aim of this work is to present the results of thermic increase obtained at the brain and intratumoral levels through a non invasive technique -Electric Capacitive Transference- (ECT), developed in 1985 by Indiba. A review of the literature does not provide any reference of cerebral and intratumoral thermometry in real time with a non invasive technique of intracranial hyperthermia. In the 8 studied patients, the increases of temperature in the brain, ranged between 0.7 and 1.5 degrees C in relation to the depth of the thermometric probe and the incidence angle of the external electrode. Between tumoral and perilesional brain tissues, thermic increase was 0.3 to 0.7 degrees C greater at tumoral level. The observation that in no case the surrounding brain tissue registered a temperature over 39.2 degrees C supports the harmlessness of the technique regarding the potential damage to healthy brain tissue and seems to confirm previous data obtained in anatomopathological studies in animal experimentation performed in 1990, which showed an absence of lesions in tissues and organs. The greater and somewhat more prolonged thermic increase observed at tumoral level has been called the "greenhouse effect".

  15. Una propuesta de actividad dirigida ECTS en la asignatura de matemáticas financieras

    Directory of Open Access Journals (Sweden)

    Guerrero Casas, Flor Mª

    2006-01-01

    Full Text Available La inminente introducción del Crédito Europeo (ECTS exige el replanteamiento de las fórmulas tradicionales de enseñanza universitaria. Para realizar el cambio de la manera menos traumática posible algunas universidades, entre las que se encuentra nuestra Universidad, han optado por realizar experiencias piloto de la implantación del nuevo sistema. Esto supone una reducción del número de horas lectivas lo que hace necesario un cambio de mentalidad a la hora de programar las asignaturas, distribuyendo los contenidos de la misma entre clases teóricas, prácticas y una serie de actividades dirigidas. En esta línea proponemos una actividad dirigida de carácter innovador que nos permite incorporar de forma simultánea antiguos contenidos teóricos y nuevos contenidos eminentemente prácticos, todo ello sustentado en el uso de una hoja de cálculo. Esta combinación nos permite profundizar en determinadas operaciones financieras además de incorporar competencias deseables a adquirir por los alumnos. En la actividad proponemos al alumno el estudio comparativo del TAE y los tantos efectivos aplicados a diferentes operaciones financieras, para lo que deberán utilizar una hoja de cálculo.

  16. Space Qualified Non-Destructive Evaluation and Structural Health Monitoring Technology, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Encouraged by Phase I accomplishments, the proposed Phase II program will significantly mature and align the development of a Space Qualified Non-Destructive...

  17. INERA Conference: Vapor Phase Technologies for Metal Oxide and Carbon Nanostructures

    International Nuclear Information System (INIS)

    2016-01-01

    We are pleased to introduce the Proceedings of the Conference “Vapor Phase Technologies for Metal Oxide and Carbon Nanostructures” (6 th to 8 th of July 2016, Velingrad, Bulgaria) organized by the Institute of Solid State Physics, Bulgarian Academy of Sciences in the frames of the Project INERA: “Research and Innovation Capacity Strengthening of ISSP-BAS in Multifunctional Nanostructures” REGPOT-2012-2013-1 NMP (http://www.inera.org). Participants from 7 different countries delivered 10 invited lectures, 16 oral and 26 poster presentations, contributing in 7 different topics. Papers submitted for publication in the Proceedings were refereed according to the standards of the Journal of Physics: Conference Series and the accepted ones illustrate the diversity and the high quality of the contributions. The Conference offered good opportunities for many interesting discussions and ample exchange of ideas between the participants. It became also a meeting point where INERA partners could plan their future collaboration and joint projects. A significant factor for the success of the Conference was the conference venue - the beautiful spa resort Velingrad located 130 km from Sofia in the western part of the Rhodope Mountains. It is one of the leading “balneological” resorts in the Balkans with its ninety mineral water springs suitable for treatment of a wide range of diseases. The participants enjoyed also the rich social program, in particular the guided trip to the excavation site Dorkovo, one of the milestones marking the beginning of the Pliocene epoch in Eastern Europe. The proceedings of conferences and workshops organized in the frames of INERA Project are regularly published by the Journal of Physics: Conference Series. We are grateful to the Journal's staff for the continuous support. Managing Editor: Diana Nesheva Co-editors: Hassan Chamati, Julia Genova, Kostadinka Gesheva, Tatyana Ivanova, Albena Paskaleva and Anna Szekeres (paper)

  18. Space nuclear power plant technology development philosophy for a ground engineering phase

    International Nuclear Information System (INIS)

    Buden, D.; Trapp, T.J.; Los Alamos National Lab., NM)

    1985-01-01

    The development of a space qualified nuclear power plant is proceeding from the technical assessment and advancement phase to the ground engineering phase. In this new phase, the selected concept will be matured by the completion of activities needed before protoflight units can be assembled and qualified for first flight applications. This paper addresses a possible philosophy to arrive at the activities to be performed during the ground engineering phase. The philosophy is derived from what we believe a potential user of nuclear power would like to see completed before commitment to a flight development phase. 5 references

  19. Space nuclear power plant technology development philosophy for a ground engineering phase

    International Nuclear Information System (INIS)

    Buden, D.; Trapp, T.J.

    1985-01-01

    The development of a space qualified nuclear power plant is proceeding from the Technical Assessment and Advancement Phase to the Ground Engineering Phase. In this new phase, the selected concept will be matured by the completion of activities needed before protoflight units can be assembled and qualified for first flight applications. This paper addresses a possible philosophy to arrive at the activities to be performed during the Ground Engineering Phase. The philosophy is derived from what we believe a potential user of nuclear power would like to see completed before commitment to a flight development phase

  20. Status of the studies on collective effects involving beam-beam interactions at the HL-LHC

    CERN Document Server

    Buffat, Xavier; Metral, Elias; Ribes Metidieri, Ariadna; Barranco Garcia, Javier; Goncalves Jorge, Patrik; Pieloni, Tatiana; Tambasco, Claudia; CERN. Geneva. ATS Department

    2018-01-01

    This note summarised the status of the studies on the coherent beam-beam effects in the HL-LHC project. It is shown that the obit, tune, chromaticity and dynamic β effects due to head-on and long-range beam-beam interactions are tolerable without dedicated mitigations in the baseline scenario. The stability of coherent beam-beam modes under the influence of the beam coupling impedance is evaluated, as well as the impact of the beam-beam induced tune spread on the Landau damping of single beam head-tail modes of oscillation. Since the beam stability is marginal at the end of the squeeze for the ultimate scenario, it is suggested to use the ATS optics to increase the effect of the octupoles at constant current, thus providing sufficient margins. Measurements suggesting that the transverse damper noise has to be significantly reduced to allow for operation with large beam-beam parameter are shown.

  1. Tercer molar ectópico a nivel de región infraorbitaria-seno maxilar Ectopic third molar of the maxillary sinus-infraorbital region

    OpenAIRE

    C. Moreno García; J. Collado López; F. Monje Gil; H. Serrano Gil; A.J. Morillo Sánchez; J. Mateo Arias; J.C. Moreno Vázquez; L. Ruiz Laza; B. Nadal Cristóbal; P. Quirós Álvarez

    2007-01-01

    Introducción. Los cordales ectópicos son aquellos incluidos en posiciones inusuales o desplazados a distancia de su normal localización anatómica. La erupción ectópica de un diente dentro de la cavidad oral es común pero en otros lugares es raro. La erupción ectópica puede ir asociada con alteraciones en el desarrollo, procesos patológicos o yatrogenia. Caso Clínico. Mujer de 56 años de edad con tercer molar superior derecho ectópico a nivel de región infraorbitaria-seno maxilar. Presentaba d...

  2. Embarazo ectópico bilateral. Presentación de un caso y revisión de la literatura

    OpenAIRE

    Yarisdey Corrales Hernández

    2012-01-01

    El embarazo ectópico es una afección ginecológica que causa frecuentemente muertes maternas directas. Se presenta el caso de un embarazo ectópico bilateral, en una paciente de 39 años de edad, que acudió al Hospital General Universitario Dr. Gustavo Aldereguía Lima, de Cienfuegos, refiriendo dolor y amenorrea de 7 semanas. Se realizó examen físico y ultrasonográfico mediante los que se le diagnosticó un embarazo ectópico. Se practicó laparotomía y se encontró un embarazo ectópico bilateral. S...

  3. Hybrid Cooling Loop Technology for Robust High Heat Flux Cooling, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Cooling Technologies, Inc. (ACT) proposes to develop a hybrid cooling loop and cold plate technology for space systems thermal management. The proposed...

  4. Novel High Pressure Pump-on-a-Chip Technology, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — HJ Science & Technology, Inc. proposes to develop a novel high pressure "pump-on-a-chip" (HPPOC) technology capable of generating high pressure and flow rate on...

  5. Enabling Technologies for Fabrication of Large Area Flexible Antennas, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — MesoScribe Technologies, a high tech start-up from SUNY-Stony Brook, proposes to apply a breakthrough new direct writing technology to meet the objectives set-forth...

  6. Space Qualified Non-Destructive Evaluation and Structural Health Monitoring Technology, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — NextGen Aeronautics is proposing an innovative space qualified non-destructive evaluation and health monitoring technology. The technology is built on concepts...

  7. Treatment technologies of liquid and solid wastes from two-phase olive oil mills

    Directory of Open Access Journals (Sweden)

    Rincón, Bárbara

    2006-03-01

    Full Text Available Over the last 10 years the manufacture of olive oil has undergone important evolutionary changes in the equipment used for the separation of olive oil from the remaining components. The latest development has been the introduction of a two-phase centrifugation process in which a horizontally-mounted centrifuge is used for a primary separation of the olive oil fraction from the vegetable solid material and vegetation water. Therefore, the new two-phase olive oil mills produce three identifiable and separate waste streams. These are: 1 the wash waters from the initial cleansing of the fruit; 2 the wash waters from the secondary centrifuge and 3 the aqueous solid residues from the primary centrifugation. As well as offering process advantages they also reduce the water consumption of the mill. The introduction of this technology was carried out in 90% of Spanish olive oil factories. Therefore, the new twophase olive mill effluents (TPOME are made up of the mixture of effluents (1 and (2, the total volume of TPOME generated being around 0.25 l/kg of olives processed. In addition, the solid residue (two-phase olive pomace, TPOP has a high organic matter concentration giving an elevated polluting load and it cannot be easily handled by traditional technology which deals with the conventional three-phase olive cake.So, this paper aims to report the main features and characteristics of TPOME, and of TPOP, as compared to the classical olive mill wastewater (OMW and olive cake derived from the three-phase manufacturing process. The advantages and disadvantages of the two-phase decanting process will be summarized. Among the treatments reported for TPOME, aerobic processes in completely mixed and activated sludge reactor showed high COD removal efficiencies. Kinetic constants of the aerobic processes were also compared at different operational conditions. The report also includes the following findings: assays of anaerobic digestion of wastewaters from the

  8. Utility advanced turbine systems (ATS) technology readiness testing -- Phase 3. Technical progress report, October 1--December 31, 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and US Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially by GE. This change has resulted from DOE`s request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include full speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown. This report summarizes work accomplished in 4Q97.

  9. Orchestrated Regulation of Nogo Receptors, Lotus, AMPA Receptors and BDNF in an ECT Model Suggests Opening and Closure of a Window of Synaptic Plasticity

    OpenAIRE

    Nordgren, Max; Karlsson, Tobias; Svensson, Maria; Koczy, Josefin; Josephson, Anna; Olson, Lars; Tingstroem, Anders; Brene, Stefan

    2013-01-01

    Electroconvulsive therapy (ECT) is an efficient and relatively fast acting treatment for depression. However, one severe side effect of the treatment is retrograde amnesia, which in certain cases can be long-term. The mechanisms behind the antidepressant effect and the amnesia are not well understood. We hypothesized that ECT causes transient downregulation of key molecules needed to stabilize synaptic structure and to prevent Ca2+ influx, and a simultaneous increase in neurotrophic factors, ...

  10. Summary Report on Phase I and Phase II Results From the 3D Printing in Zero-G Technology Demonstration Mission. Volume II

    Science.gov (United States)

    Prater, T. J.; Werkheiser, N. J.; Ledbetter, F. E., III

    2018-01-01

    In-space manufacturing seeks to develop the processes, skill sets, and certification architecture needed to provide a rapid response manufacturing capability on long-duration exploration missions. The first 3D printer on the Space Station was developed by Made in Space, Inc. and completed two rounds of operation on orbit as part of the 3D Printing in Zero-G Technology Demonstration Mission. This Technical Publication provides a comprehensive overview of the technical objections of the mission, the two phases of hardware operation conducted on orbit, and the subsequent detailed analysis of specimens produced. No engineering significant evidence of microgravity effects on material outcomes was noted. This technology demonstration mission represents the first step in developing a suite of manufacturing capabilities to meet future mission needs.

  11. UTILITY ADVANCED TURBINE SYSTEMS (ATS) TECHNOLOGY READINESS TESTING PHASE 3 RESTRUCTURED (3R)

    Energy Technology Data Exchange (ETDEWEB)

    Unknown

    2000-03-17

    This scope document defines the work scope for accomplishing the design of the GE MS7001H and MS9001H (7H and 9H) combined-cycle power systems under the original ATS Phase 3 DOE Cooperative Agreement No. DE-FC21-95MC31176, and incorporates changes in scope required to convert Phase 3 to the ''restructured'' Phase 3R as defined in Amendment A012 to the Cooperative Agreement.

  12. Design Research on Three-Phase PWM Rectifier Based on Double Closed Loop Control Technology

    Directory of Open Access Journals (Sweden)

    Guang Ya LIU

    2014-02-01

    Full Text Available Based on the high frequency of three-phase voltage source PWM rectifier, this paper established a mathematical model of three phase current inner ring and outer ring voltage, and put forward the setting method of three phase double closed loop control. Finally, it was verified through simulation. The experimental results show that Three-phase output of DC voltage is stable with the operation of regulating systems, the current flowing into the grid tends to be sinusoidal and power factor is close to 1, which greatly reduce the interference of harmonics on the grid, thus improve grid operation.

  13. Clinical proteomics in kidney disease as an exponential technology: heading towards the disruptive phase

    OpenAIRE

    Sanchez-Ni?o, Maria Dolores; Sanz, Ana B.; Ramos, Adrian M.; Fernandez-Fernandez, Beatriz; Ortiz, Alberto

    2017-01-01

    Abstract Exponential technologies double in power or processing speed every year, whereas their cost halves. Deception and disruption are two key stages in the development of exponential technologies. Deception occurs when, after initial introduction, technologies are dismissed as irrelevant, while they continue to progress, perhaps not as fast or with so many immediate practical applications as initially thought. Twenty years after the first publications, clinical proteomics is still not ava...

  14. Baseline Study Methodology for Future Phases of Research on Nuclear Power Plant Control Room Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Le Blanc, Katya Lee [Idaho National Lab. (INL), Idaho Falls, ID (United States); Bower, Gordon Ross [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hill, Rachael Ann [Idaho National Lab. (INL), Idaho Falls, ID (United States); Spielman, Zachary Alexander [Idaho National Lab. (INL), Idaho Falls, ID (United States); Rice, Brandon Charles [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-07-01

    In order to provide a basis for industry adoption of advanced technologies, the Control Room Upgrades Benefits Research Project will investigate the benefits of including advanced technologies as part of control room modernization This report describes the background, methodology, and research plan for the first in a series of full-scale studies to test the effects of advanced technology in NPP control rooms. This study will test the effect of Advanced Overview Displays in the partner Utility’s control room simulator

  15. Technology needs for the later phases of an oil spill. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    Goodman, R. [Innovative Ventures Ltd., Cochrane, AB (Canada)

    2007-07-01

    The phases of an oil spill response can be classified as initial response, project phase, end phase and the monitoring phase. The initial on-water phase of the response or shoreline cleanup includes the development of contingency planning, stockpiling of equipment and research into response equipment for removing oil on water. Lack of planning for a response can lead to an initial response that has less than satisfactory results. An initial assessment of the oil spill response begins at the moment the spill occurs and continues for days, depending on the quality of the initial response. This phase includes the use of booms, skimmers, dispersants and in-situ burning. It was emphasized that oil spill research should focus on gathering scientific information needed to make decisions during the project phase and beyond. Typically, this will involve the study of long-term impacts and should be undertaken in a research environment in order to apply new data to any spill scenario. This paper highlighted knowledge needs to support decisions in the cleanup phase. The Exxon Valdez incident provided information on the long-term impacts of a variety of cleanup techniques. This paper also addressed damage assessment and restoration issues along with the decision to terminate a response. Once a response has been terminated, long-term monitoring of the ecosystem begins in order to identify the spill impact. 9 refs., 6 figs.

  16. Animal-vehicle crash mitigation using advanced technology : phase II, system effectiveness and system acceptance.

    Science.gov (United States)

    2009-03-01

    This project was initiated in the fall of 1999. The results through the fall of 2005 (Phase I) have been documented in detail in an earlier report. The accomplishments of Phase I included the following: the identification of existing animal detection...

  17. High Temperature Shape Memory Alloy Technology for Inlet Flow Control, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Recent advances in propulsion, aerodynamic, and noise technologies have led to a revived interest in supersonic cruise aircraft; however, achieving economic...

  18. Passive Technology to Improve Criticality Control of NTP Reactors, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — This SBIR will develop passive reactor criticality control technology for Nuclear Thermal Propulsion (NTP) identified by Ultra Safe Nuclear Corporation (USNC) in...

  19. MATE: Modern Software Technology for Flight Test Automation and Orchestration, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The development of advanced technologies for flight testing, measurement, and data acquisition are critical to effectively meeting the future goals and challenges...

  20. Privacy as Personality Right: Why the ECtHR’s Focus on Ulterior Interests Might Prove Indispensable in the Age of “Big Data”

    Directory of Open Access Journals (Sweden)

    Bart van der Sloot

    2015-02-01

    Full Text Available Article 8 ECHR was adopted as a classic negative right, which provides the citizen protection from unlawful and arbitrary interference by the state with his private and family life, home and communication. The ECtHR, however, has gradually broadened its scope so that the right to privacy encroaches upon other provisions embodied in the Convention, includes rights and freedoms explicitly left out of the ECHR by the drafters of the Convention and functions as the main pillar on which the Court has built its practice of opening up the Convention for new rights and freedoms. Consequently, Article 8 ECHR has been transformed from a classic privacy right to a personality right, providing protection to the personal development of individuals. Apart from its theoretical significance, this shift might prove indispensable in the age of Big Data, as personality rights protect a different type of interest, which is far more easy to substantiate in the new technological paradigm than those associated with the right to privacy.

  1. Pacific Research Platform - Creation of a West Coast Big Data Freeway System Applied to the CONNected objECT (CONNECT) Data Mining Framework for Earth Science Knowledge Discovery

    Science.gov (United States)

    Sellars, S. L.; Nguyen, P.; Tatar, J.; Graham, J.; Kawsenuk, B.; DeFanti, T.; Smarr, L.; Sorooshian, S.; Ralph, M.

    2017-12-01

    A new era in computational earth sciences is within our grasps with the availability of ever-increasing earth observational data, enhanced computational capabilities, and innovative computation approaches that allow for the assimilation, analysis and ability to model the complex earth science phenomena. The Pacific Research Platform (PRP), CENIC and associated technologies such as the Flash I/O Network Appliance (FIONA) provide scientists a unique capability for advancing towards this new era. This presentation reports on the development of multi-institutional rapid data access capabilities and data pipeline for applying a novel image characterization and segmentation approach, CONNected objECT (CONNECT) algorithm to study Atmospheric River (AR) events impacting the Western United States. ARs are often associated with torrential rains, swollen rivers, flash flooding, and mudslides. CONNECT is computationally intensive, reliant on very large data transfers, storage and data mining techniques. The ability to apply the method to multiple variables and datasets located at different University of California campuses has previously been challenged by inadequate network bandwidth and computational constraints. The presentation will highlight how the inter-campus CONNECT data mining framework improved from our prior download speeds of 10MB/s to 500MB/s using the PRP and the FIONAs. We present a worked example using the NASA MERRA data to describe how the PRP and FIONA have provided researchers with the capability for advancing knowledge about ARs. Finally, we will discuss future efforts to expand the scope to additional variables in earth sciences.

  2. DE-FOA-EE0005502 Advanced Percussive Drilling Technology for Geothermal Exploration and Development Phase II Report.

    Energy Technology Data Exchange (ETDEWEB)

    Su, Jiann-Cherng [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Raymond, David W. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Prasad, Somuri V. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Wolfer, Dale R. [Atlas-Copco Secoroc, LLC, Fagersta (Sweden)

    2017-05-01

    Percussive hammers are a promising advance in drilling technology for geothermal since they rely upon rock reduction mechanisms that are well-suited for use in the hard, brittle rock characteristic of geothermal formations. The project research approach and work plan includes a critical path to development of a high-temperature (HT) percussive hammer using a two- phase approach. The work completed in Phase I of the project demonstrated the viability of percussive hammers and that solutions to technical challenges in design, material technology, and performance are likely to be resolved. Work completed in Phase II focused on testing the findings from Phase I and evaluating performance of the materials and designs at high- operating temperatures. A high-operating temperature (HOT) drilling facility was designed, built, and used to test the performance of the DTH under extreme conditions. Results from the testing indicate that a high-temperature capable hammer can be developed and is a viable alternative for user in the driller's toolbox.

  3. Optical technology for microwave applications VI and optoelectronic signal processing for phased-array antennas III; Proceedings of the Meeting, Orlando, FL, Apr. 20-23, 1992

    Science.gov (United States)

    Yao, Shi-Kay; Hendrickson, Brian M.

    The following topics related to optical technology for microwave applications are discussed: advanced acoustooptic devices, signal processing device technologies, optical signal processor technologies, microwave and optomicrowave devices, advanced lasers and sources, wideband electrooptic modulators, and wideband optical communications. The topics considered in the discussion of optoelectronic signal processing for phased-array antennas include devices, signal processing, and antenna systems.

  4. NASA's Van Allen Probes RBSP-ECT and NSF's FIREBIRD Data Products and Access to Them: An Insider's Outlook on the Inner and Outer Belts.

    Science.gov (United States)

    Smith, S. S.; Spence, H. E.; Geoffrey, R.; Klumpar, D. M.

    2017-12-01

    In this poster, we present a summary of access to data products Radiation Belt Storm Probes - Energetic Particle Composition, and Thermal plasma (RBSP-ECT) suite of NASA's Van Allen Probes mission. The RBSP-ECT science investigation (http://rbsp-ect.sr.unh.edu) measures comprehensively the near-Earth charged particle environment in order to understand the processes that control the acceleration, global distribution, and variability of radiation belt electrons and ions. RBSP-ECT data products derive from the three instrument elements that comprise the suite, which collectively covers the broad energies that define the source and seed populations, the core radiation belts, and also their highest energy ultra-relativistic extensions. These RBSP-ECT instruments include, from lowest to highest energies: the Helium, Oxygen, Proton, and Electron (HOPE) sensor, the Magnetic Electron and Ion Spectrometer (MagEIS), and the Relativistic Electron and Proton Telescope (REPT). We provide a brief overview of their principles of operation, as well as a description of the Level 1-3 data products that the HOPE, MagEIS, and REPT instruments produce, both separately and together. We provide a summary of how to access these RBSP-ECT data products at our Science Operation Center and Science Data Center (http://www.rbsp-ect.lanl.gov/rbsp_ect.php ) as well as caveats for their use. In addition, we also provide a summary of access to the data products from NSF's CubeSat mission called Focused Investigation of Relativistic Electron Burst: Intensity, Range, and Dynamics (FIREBIRD). The dual CubeSat FIREBIRD missions provide data on energetic radiation belt electrons precipitating into the atmosphere at low altitudes, which complements and is contemporary with RBSP-ECT measurements. We provide a similar summary of how to access these data (https://ssel.montana.edu/firebird2.html). Finally, in the spirit of efficiently and effectively promoting and encouraging new collaborations, we present a

  5. Definition of technology development missions for early space stations. Large space structures, phase 2, midterm review

    Science.gov (United States)

    1984-01-01

    The large space structures technology development missions to be performed on an early manned space station was studied and defined and the resources needed and the design implications to an early space station to carry out these large space structures technology development missions were determined. Emphasis is being placed on more detail in mission designs and space station resource requirements.

  6. THE DEVELOPMENT OF COMMUNICATIVE COMPETENCES VIA CROSS-CURRICULAR ECTS SEMINARS EL DESARROLLO DE COMPETENCIAS COMUNICATIVAS A TRAVÉS DE SEMINARIOS TRANSVERSALES ECTS: UNA EXPERIENCIA EN LA UNIVERSIDAD DE JAÉN

    Directory of Open Access Journals (Sweden)

    María Luisa Pérez Cañado

    2011-03-01

    Full Text Available This article describes an innovative experience in the development of cross-curricular generic and subject-specific competencies carried out via a system of ECTS seminars which has been developed within the degree in English Philology at the University of Jaén during the academic year 2008-2009. The aim of these seminars has been to reinforce coordination amongst professors, to overcome the oftentimes worrying individualism which characterizes teaching practices at tertiary level, and to make the transition from the transmission of information model based on ex-cathedra lecturing to a more critical and significant learning based on competencies and not merely on contents. After justifying the need for an experience of this type and describing its development, contents, and evaluation, the article goes on to present the results of the descriptive study which has accompanied it. The outcomes of the investigation have revealed that the ECTS seminar system has been highly beneficial for the participating students. The latter have been aware of the existence, development, and usefulness of a set of generic and specific competencies which are essential for the English philologist. We consider that, in our immediate context, these ECTS seminars have constituted an important first step in the integration, teaching, and assessment of competencies in the curriculum.El presente artículo describe una experiencia novedosa en el desarrollo de competencias genéricas y específicas y en el fomento de la interdisciplinariedad y la transversalidad. Se trata de un sistema de seminarios ECTS – que también entroncan con el Plan de Acción Tutorial – que se han desarrollado en la Licenciatura en Filología Inglesa de la Universidad de Jaén durante este curso académico (2008-2009. Con ellos, hemos pretendido fomentar la coordinación entre el profesorado de dicha titulación, superar el individualismo que suele caracterizar a las actuaciones docentes en

  7. Aircraft Control Augmentation and Health Monitoring Using FADS Technology, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — This Phase I research proposal is aimed at demonstrating the feasibility of an innovative architecture comprising control augmentation and on-line health monitoring...

  8. Low-Cost Composite Technology for Large Rocket Payload Fairings, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The Commission on the Future of the U.S. Aerospace Industry states that reducing the cost to orbit is an essential ingredient for progress. This Phase I project will...

  9. Metal-Mesh Optical Filter Technology for Mid IR, Far IR, and Submillimeter, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — This SBIR Phase I proposal describes a method of fabrication of far IR and THZ range multilayer metal-mesh filters. This type of filter consists of alternative...

  10. Fast GC for Space Applications Based on PIES Technology, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — This SBIR Phase II project is aimed at the development of an analytical instrument which combines the advantages of fast gas chromatography (GC) and a detector that...

  11. Scaled Model Technology for Flight Research of General Aviation Aircraft, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Our proposed future Phase II activities are aimed at developing a scientifically based "tool box" for flight research using scaled models. These tools will be of...

  12. Near Net Shape Fabrication Technology for Shape Memory Alloy Components, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — This STTR Phase I effort proposes to develop an innovative, affordable processing route for larger-sized shape memory alloy (SMA) components. Despite significant...

  13. Innovative CO2 Analyzer Technology for the Eddy Covariance Flux Monitor, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose to build and evaluate NDIR Analyzers that can observe eddy covariance flux of CO2 from unmanned airborne platforms. For both phases, a total of four...

  14. Performance Evaluation of Advanced Retrofit Roof Technologies Using Field-Test Data Phase Three Final Report, Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    Biswas, Kaushik [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Childs, Phillip W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Atchley, Jerald Allen [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-01-01

    This article presents some miscellaneous data from two low-slope and two steep-slope experimental roofs. The low-slope roofs were designed to compare the performance of various roof coatings exposed to natural weatherization. The steep-slope roofs contained different combinations of phase change material, rigid insulation, low emittance surface and above-sheathing ventilation, with standing-seam metal panels on top. The steep-slope roofs were constructed on a series of adjacent attics separated at the gables using thick foam insulation. This article describes phase three (3) of a study that began in 2009 to evaluate the energy benefits of a sustainable re-roofing technology utilizing standing-seam metal roofing panels combined with energy efficient features like above-sheathing-ventilation (ASV), phase change material (PCM) and rigid insulation board. The data from phases 1 and 2 have been previously published and reported [Kosny et al., 2011; Biswas et al., 2011; Biswas and Childs, 2012; Kosny et al., 2012]. Based on previous data analyses and discussions within the research group, additional test roofs were installed in May 2012, to test new configurations and further investigate different components of the dynamic insulation systems. Some experimental data from phase 3 testing from May 2012 to December 2013 and some EnergyPlus modeling results have been reported in volumes 1 and 3, respectively, of the final report [Biswas et al., 2014; Biswas and Bhandari, 2014].

  15. Review of solid–liquid phase change materials and their encapsulation technologies

    OpenAIRE

    Su, Weiguang; Darkwa, Jo; Kokogiannakis, Georgios

    2017-01-01

    Various types of solid–liquid phase change materials (PCMs) have been reviewed for thermal energy storage applications. The review has shown that organic solid–liquid PCMs have much more advantages and capabilities than inorganic PCMs but do possess low thermal conductivity and density as well as being flammable. Inorganic PCMs possess higher heat storage capacities and conductivities, cheaper and readily available as well as being non-flammable, but do experience supercooling and phase segre...

  16. The Global ECT-MRI Research Collaboration (GEMRIC: Establishing a multi-site investigation of the neural mechanisms underlying response to electroconvulsive therapy

    Directory of Open Access Journals (Sweden)

    Leif Oltedal

    2017-01-01

    Full Text Available Major depression, currently the world's primary cause of disability, leads to profound personal suffering and increased risk of suicide. Unfortunately, the success of antidepressant treatment varies amongst individuals and can take weeks to months in those who respond. Electroconvulsive therapy (ECT, generally prescribed for the most severely depressed and when standard treatments fail, produces a more rapid response and remains the most effective intervention for severe depression. Exploring the neurobiological effects of ECT is thus an ideal approach to better understand the mechanisms of successful therapeutic response. Though several recent neuroimaging studies show structural and functional changes associated with ECT, not all brain changes associate with clinical outcome. Larger studies that can address individual differences in clinical and treatment parameters may better target biological factors relating to or predictive of ECT-related therapeutic response. We have thus formed the Global ECT-MRI Research Collaboration (GEMRIC that aims to combine longitudinal neuroimaging as well as clinical, behavioral and other physiological data across multiple independent sites. Here, we summarize the ECT sample characteristics from currently participating sites, and the common data-repository and standardized image analysis pipeline developed for this initiative. This includes data harmonization across sites and MRI platforms, and a method for obtaining unbiased estimates of structural change based on longitudinal measurements with serial MRI scans. The optimized analysis pipeline, together with the large and heterogeneous combined GEMRIC dataset, will provide new opportunities to elucidate the mechanisms of ECT response and the factors mediating and predictive of clinical outcomes, which may ultimately lead to more effective personalized treatment approaches.

  17. Precision Membrane Optical Shell (PMOS) Technology for RF/Microwave to Lightweight LIDAR Apertures, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Membrane Optical Shell Technology (MOST) is an innovative combination of 1) very low areal density (40 to 200g/m2) optically smooth (<20 nm rms), metallic coated...

  18. Precision Membrane Optical Shell (PMOS) Technology for Lightweight LIDAR Apertures, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Precision membrane optical shell (PMOS) technology is an innovative combination of 1) ultra lightweight optically smooth membrane thin films, 2) advanced mold based...

  19. TORC-SP: High Torque, Low Jitter Scissored-Pair CMG Technology, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA sees an increasing role in the near future for small satellites in the 5-100 kg size range. A potentially disruptive technology, small satellites are being eyed...

  20. Prototype-Technology Evaluator and Research Aircraft (PTERA) Flight Test Assessment, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The Area-I team has developed and fabricated the unmanned Prototype-Technology Evaluation and Research Aircraft or PTERA ("ptera" being Greek for wing, or...

  1. Human factors phase IV : risk analysis tool for new train control technology

    Science.gov (United States)

    2005-01-01

    This report covers the theoretical development of the safety state model for railroad operations. Using data from a train control technology experiment, experimental application of the model is demonstrated. A stochastic model of system behavior is d...

  2. Game-Changing Photovoltaic Flexible Blanket Solar Array Technology with Spectrolab Flexsheets, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Deployable Space Systems, Inc. (DSS) in collaboration with Spectrolab, Inc. has developed a modular multi-junction photovoltaic flexible blanket technology that uses...

  3. Extremely Lightweight Segmented Membrane Optical Shell Fabrication Technology for Future IR to Optical Telescope, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose that the Membrane Optical Shell Technology (MOST) substrate fabrication approach be extended with a specific focus on advanced off-axis very light weight,...

  4. Affordable, Precision Reflector Mold Technology (PDRT08-029), Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Advances in replication mold technology that reduce material costs, grinding time, and polishing time would enable fabrication of large, precision molds and possibly...

  5. Integrated MLI: Advanced Thermal Insulation Using Micro-Molding Technology, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Current Multilayer Insulation (MLI) technology is over 50 years old, and is typically comprised of 10 to 120 layers of metalized polymer films separated by polyester...

  6. Fabrication Technology for X-Ray Optics and Mandrels, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA has a cross-project need for large format aspheric x-ray optics, which, demonstrate exceptionally low periodic surface errors. Available technologies to both...

  7. Rad-hard Reconfigurable Bi-Directional Level Shifters Technology for Micro- and Nanosatellites, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Various technologies available to space system designers that operate at different voltage levels. It is, however, important to interface, maintain, and update these...

  8. A Novel Technology for Simultaneous TOC Reduction and Biofouling Prevention, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Recycling of water using biological processes is a primary goal of NASA's advanced life support programs. This proposal concerns a technology to simultaneously...

  9. Human factors phase III : effects of train control technology on operator performance.

    Science.gov (United States)

    2005-01-31

    This report describes a study evaluating the effects of train control technology on locomotive engineer performance. Several types of train control systems were evaluated: partial automation (cruise control and programmed stop) and full automation we...

  10. Use-Driven Testbed for Evaluating Systems and Technologies (U-TEST), Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — NextGen will require the development of novel solutions to shape the airspace of tomorrow. Along with the ability to generate new systems and technologies comes the...

  11. TORC-SP: High Torque, Low Jitter Scissored-Pair CMG Technology, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA sees an increasing role in the near future for small satellites in the 5-100 kg size range. A potentially disruptive technology, small satellites are being eyed...

  12. Novel Polymer Microfluidics Technology for In Situ Planetary Exploration, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Los Gatos Research proposes to develop a new polymer based microfluidics technology for NASA planetary science applications. In particular, we will design, build and...

  13. Metal-Mesh Optical Filter Technology for Mid IR, Far IR, and Submillimeter, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — The innovative, high transmission band-pass filter technology proposed here is an improvement in multilayer metal-mesh filter design and manufacture for the far IR...

  14. Thermoacoustic Duplex Technology for Cooling and Powering a Venus Lander, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Sierra Lobo proposes to develop a technology that can provide both cooling and electric power generation using heat. When coupled with a radioisotope heat source,...

  15. A patent landscape analysis for organic photovoltaic solar cells: Identifying the technology's development phase

    OpenAIRE

    Lizin, Sebastien; Van Passel, Steven; De Schepper, Ellen; Delvenne, Cathérine; Dijk, Marc; Leroy, Julie

    2013-01-01

    Organic photovoltaics (OPV) have developed into a vast research area. Progress in various directions has made it difficult to monitor the technology's precise development state. We offer a patent landscape analysis over all OPV devices, their substrates and encapsulation materials to provide an overview of patenting activity from a historical, organizational, geographical and technological point of view. Such an exercise is instrumental for private companies and research institutes aiming ...

  16. Some Aspects of and Perspectives on the Public Prosecutor’s Objectivity according to ECtHR Case-Law

    Directory of Open Access Journals (Sweden)

    Gert Johan Kjelby

    2015-07-01

    Full Text Available The principle of objectivity includes several aspects of the prosecutor’s functions. This article highlights some aspects of and perspectives on the prosecutor’s role and raises some central questions regarding the prosecutor’s obligation to objectivity according to the case-law of the ECtHR.    The fundamental duty to act objectively is first of all crucial for the prosecutor’s role as the protector of human rights, because prosecutors’ objectivity and independence is an integrated element of the state’s human rights obligations (the positive obligation to conduct an “effective official investigation” and right to an “effective” domestic remedy. ECtHR’s case-law has a strong focus on the objectivity of police and prosecutors, and the court has performed a thorough examination of several aspects of this obligation.    The prosecutor’s duty to act objectively is further elaborated in connection with aspects of the law on evidence, especially regarding the collection of evidence, the evaluation of evidence, evidentiary standards, and the prosecution's burden of proof. The author suggests some legal strategies to secure and uphold a strict principle of objectivity.    Finally the article also raises the question whether prosecutors’ involvement in plea agreements a threat to the principle of objectivity. Such procedures are not in itself incompatible with the fair-trial standard in article 6, but the concept of plea-bargaining and plea-agreements is a complex and disputed one. ECtHR has in some cases found such agreements incompatible with the obligation to conduct an effective investigation. The author argues that the overarching principle should be that any simplified criminal procedure must give sufficient guarantees to secure the overall fairness of the process and its outcome. To lean on the prosecutor’s duty to objectivity and independency in this respect is hardly enough.

  17. Embarazo ectópico ístmico-cervical complicado con placenta increta: reporte de un caso

    Directory of Open Access Journals (Sweden)

    Jamilton Figueroa Solano

    2012-07-01

    Full Text Available Paciente femenina de 37 años de edad, quien ingresa con diagnóstico de embarazo ectópico ístmico-cervical; indicando tratamiento conservador farmacológico con Metotrexato. Posteriormente presentó sangrado genital en abundante cantidad y descompensación hemodinámica. Se le realizó ultrasonido transvaginal control con persistencia de una imagen con similares dimensiones a la del ingreso por lo que se decide realizar laparotomía exploradora e histerectomía total, con reporte histopatológico de embarazo ístmico y placenta increta. La evolución posterior a la cirugía fue satisfactoria. El objetivo del siguiente caso es presentar y discutir el hallazgo de una patología infrecuente como lo es el embarazo ectópico ístmico-cervical. Palabras clave: Embarazo ectópico, embarazo ístmico, acretismo placentario, metotrexato. Isthmian-cervical ectopic pregnancy and placenta increta: a case report Abstract A 37 years old female patient, who was admitted with diagnosis of Isthmian-cervical ectopic pregnancy; indicating conservative pharmacotherapy with methotrexate. Afterwards the patient presented profuse genital bleeding and hemodynamic decompensation. A control transvaginal ultrasound was performed showing persistence of an image with similar dimensions to admission images, deciding to perform a scaning laparotomy and following total hysterectomy, with histopathological reports of Isthmian pregnancy and placenta increta. The Patient’s clinical evolution after surgery was successful. The purpose of the following case is to present and discuss the discovery of a disease as rare as the Isthmian-cervical ectopic pregnancy.

  18. Characterization of aqueous two phase systems by combining lab-on-a-chip technology with robotic liquid handling stations.

    Science.gov (United States)

    Amrhein, Sven; Schwab, Marie-Luise; Hoffmann, Marc; Hubbuch, Jürgen

    2014-11-07

    Over the last decade, the use of design of experiment approaches in combination with fully automated high throughput (HTP) compatible screenings supported by robotic liquid handling stations (LHS), adequate fast analytics and data processing has been developed in the biopharmaceutical industry into a strategy of high throughput process development (HTPD) resulting in lower experimental effort, sample reduction and an overall higher degree of process optimization. Apart from HTP technologies, lab-on-a-chip technology has experienced an enormous growth in the last years and allows further reduction of sample consumption. A combination of LHS and lab-on-a-chip technology is highly desirable and realized in the present work to characterize aqueous two phase systems with respect to tie lines. In particular, a new high throughput compatible approach for the characterization of aqueous two phase systems regarding tie lines by exploiting differences in phase densities is presented. Densities were measured by a standalone micro fluidic liquid density sensor, which was integrated into a liquid handling station by means of a developed generic Tip2World interface. This combination of liquid handling stations and lab-on-a-chip technology enables fast, fully automated, and highly accurate density measurements. The presented approach was used to determine the phase diagram of ATPSs composed of potassium phosphate (pH 7) and polyethylene glycol (PEG) with a molecular weight of 300, 400, 600 and 1000 Da respectively in the presence and in the absence of 3% (w/w) sodium chloride. Considering the whole ATPS characterization process, two complete ATPSs could be characterized within 24h, including four runs per ATPS for binodal curve determination (less than 45 min/run), and tie line determination (less than 45 min/run for ATPS preparation and 8h for density determination), which can be performed fully automated over night without requiring man power. The presented methodology provides

  19. Pronóstico reproductivo posterior a un embarazo ectópico según modalidad de tratamiento

    OpenAIRE

    Silva G,María Carolina; Errázuriz V,Joaquín; Urzúa V,María José; Sumar U,Francisco; Troncoso R,Fernando; Rondini F-D,Carlos; Insunza F,Alvaro

    2014-01-01

    Introducción: Entre un 20 - 60% de las pacientes que presentan un embarazo ectópico (EE) desarrollarán infertilidad en el futuro. Objetivo: Comparar las tasas de fertilidad posterior a un EE según tipo de tratamiento: médico con Metotrexato o quirúrgico, en un grupo de pacientes sin acceso a técnicas de fertilización asistida. Métodos: Presentamos un estudio de cohorte retrospectivo de pacientes con diagnóstico de EE tratadas en el Servicio de Ginecología del Hospital Padre Hurtado, entre ene...

  20. Embarazo ectópico ístmico-cervical complicado con placenta increta: reporte de un caso

    OpenAIRE

    Jamilton Figueroa Solano; Franko Herrera Castillo; Dajhana Serrano González; Rafael Marcano Vivas; María Sánchez Hurtado; Julio César Lacruz Uzcátegui

    2012-01-01

    Paciente femenina de 37 años de edad, quien ingresa con diagnóstico de embarazo ectópico ístmico-cervical; indicando tratamiento conservador farmacológico con Metotrexato. Posteriormente presentó sangrado genital en abundante cantidad y descompensación hemodinámica. Se le realizó ultrasonido transvaginal control con persistencia de una imagen con similares dimensiones a la del ingreso por lo que se decide realizar laparotomía exploradora e histerectomía total, con reporte histopatológico de e...

  1. Electrical capacitance tomography (ECT) and gamma radiation meter for comparison with and validation and tuning of computational fluid dynamics (CFD) modeling of multiphase flow

    International Nuclear Information System (INIS)

    Pradeep, Chaminda; Yan, Ru; Mylvaganam, Saba; Vestøl, Sondre; Melaaen, Morten C

    2014-01-01

    The electrical capacitance tomographic (ECT) approach is increasingly seen as attractive for measurement and control applications in the process industries. Recently, there is increased interest in using the tomographic details from ECT for comparing with and validating and tuning CFD models of multiphase flow. Collaboration with researchers working in the field of computational fluid dynamics (CFD) modeling of multiphase flows gives valuable information for both groups of researchers in the field of ECT and CFD. By studying the ECT tomograms of multiphase flows under carefully monitored inflow conditions of the different media and by obtaining the capacitance values, C(i, j, t) with i = 1…N, j = 1, 2,…N and i ≠ j obtained from ECT modules with N electrodes, it is shown how the interface heights in a pipe with stratified flow of oil and air can be fruitfully compared to the values of those obtained from ECT and gamma radiation meter (GRM) for improving CFD modeling. Monitored inflow conditions in this study are flow rates of air, water and oil into a pipe which can be positioned at varying inclinations to the horizontal, thus emulating the pipelines laid in subsea installations. It is found that ECT-based tomograms show most of the features seen in the GRM-based visualizations with nearly one-to-one correspondence to interface heights obtained from these two methods, albeit some anomalies at the pipe wall. However, there are some interesting features the ECT manages to capture: features which the GRM or the CFD modeling apparently do not show, possibly due to parameters not defined in the inputs to the CFD model or much slower response of the GRM. Results presented in this paper indicate that a combination of ECT and GRM and preferably with other modalities with enhanced data fusion and analysis combined with CFD modeling can help to improve the modeling, measurement and control of multiphase flow in the oil and gas industries and in the process industries

  2. Electrical capacitance tomography (ECT) and gamma radiation meter for comparison with and validation and tuning of computational fluid dynamics (CFD) modeling of multiphase flow

    Science.gov (United States)

    Pradeep, Chaminda; Yan, Ru; Vestøl, Sondre; Melaaen, Morten C.; Mylvaganam, Saba

    2014-07-01

    The electrical capacitance tomographic (ECT) approach is increasingly seen as attractive for measurement and control applications in the process industries. Recently, there is increased interest in using the tomographic details from ECT for comparing with and validating and tuning CFD models of multiphase flow. Collaboration with researchers working in the field of computational fluid dynamics (CFD) modeling of multiphase flows gives valuable information for both groups of researchers in the field of ECT and CFD. By studying the ECT tomograms of multiphase flows under carefully monitored inflow conditions of the different media and by obtaining the capacitance values, C(i, j, t) with i = 1…N, j = 1, 2,…N and i ≠ j obtained from ECT modules with N electrodes, it is shown how the interface heights in a pipe with stratified flow of oil and air can be fruitfully compared to the values of those obtained from ECT and gamma radiation meter (GRM) for improving CFD modeling. Monitored inflow conditions in this study are flow rates of air, water and oil into a pipe which can be positioned at varying inclinations to the horizontal, thus emulating the pipelines laid in subsea installations. It is found that ECT-based tomograms show most of the features seen in the GRM-based visualizations with nearly one-to-one correspondence to interface heights obtained from these two methods, albeit some anomalies at the pipe wall. However, there are some interesting features the ECT manages to capture: features which the GRM or the CFD modeling apparently do not show, possibly due to parameters not defined in the inputs to the CFD model or much slower response of the GRM. Results presented in this paper indicate that a combination of ECT and GRM and preferably with other modalities with enhanced data fusion and analysis combined with CFD modeling can help to improve the modeling, measurement and control of multiphase flow in the oil and gas industries and in the process industries

  3. The anticoagulant effect of therapeutic levels of dabigatran in atrial fibrillation evaluated by thrombelastography (TEG®), Hemoclot Thrombin Inhibitor (HTI) assay and Ecarin Clotting Time (ECT)

    DEFF Research Database (Denmark)

    Solbeck, Sacha; Jensen, Annette Schophuus; Maschmann, Christian

    2018-01-01

     min), mean dabigatran concentration of 179.2 ng/mL by HTI (range 26-687 ng/mL) and by ECT 225.1 ng/mL (range 42-1020 ng/mL). The two dosage groups had comparable anticoagulation demonstrated by equally prolonged TEG® R (p = .909), HTI (p = .707) and ECT (p = .567). No difference in creatinine levels...... Time (ECT) in patients with non-valvular atrial fibrillation (NVAF). Blood samples from 35 AF patients receiving either 110 mg (n 19) or 150 mg (n 16) dabigatran twice daily were analyzed with TEG®, HTI and ECT 2-3 h after dabigatran intake. All patients had prolonged TEG® R. The patients receiving...... dabigatran 110 mg ×2 had a TEG® R mean 14.2 min (range 9.1-25), a mean dabigatran concentration measured by HTI of 268.5 ng/mL (range 54-837 ng/mL) and by ECT of 355.7 ng/mL (range 40-1020 ng/mL). The corresponding numbers for patients receiving dabigatran 150 mg ×2 were TEG® R mean of 12.5 min (range 9.2-23.2...

  4. CO2 capture technologies: current status and new directions using supported ionic liquid phase (SILP) absorbers

    DEFF Research Database (Denmark)

    Kolding, Helene; Fehrmann, Rasmus; Riisager, Anders

    2012-01-01

    Current state-of-the-art techniques for CO2 capture are presented and discussed. Post-combustion capture of CO2 by absorption is the technology most easily retrofitted to existing installations, but at present this is not economically viable to install and run. Using ionic liquids instead...... of aqueous amine solutions overcomes the major thermodynamic issues. By applying SILP technology further advances, in terms of ease of handling and sorption dynamics, are obtained. Initial experimental studies showed that ionic liquids such as tetrahexylammonium prolinate, [N6666][Pro], provide a good...... candidate for CO2 absorption using SILP technology. Thus a solid SILP absorber comprised of 40 wt% [N6666][Pro] loaded on precalcined silica quantitatively takes up about 1.2 mole CO2 per mole of ionic liquid in consecutive absorption-desorption cycles in a flow-experiment performed with 0.09 bar of CO2 (9...

  5. Front-end technology for phased-arrays with digital beamforming

    NARCIS (Netherlands)

    Vliet, F.E. van; Hek, A.P. de

    2008-01-01

    Phased-arrays are widely used in the military and space domain. They are pervading the civil domain in base stations and the like and distribution of systems over a single or multiple platforms is on the way. With increased connectivity and communication between partial systems, it is less

  6. Advanced Coating Technology for Enhanced Performance of Microchannel Plates for UV Detectors, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — In this NASA SBIR Phase I proposal we propose to apply a highly conformal coating of ZnO and AlN or a double layer of GaN to the surface and internal pore walls of...

  7. Evolution of Ada technology in the flight dynamics area: Implementation/testing phase analysis

    Science.gov (United States)

    Quimby, Kelvin L.; Esker, Linda; Miller, John; Smith, Laurie; Stark, Mike; Mcgarry, Frank

    1989-01-01

    An analysis is presented of the software engineering issues related to the use of Ada for the implementation and system testing phases of four Ada projects developed in the flight dynamics area. These projects reflect an evolving understanding of more effective use of Ada features. In addition, the testing methodology used on these projects has changed substantially from that used on previous FORTRAN projects.

  8. Phase 1 report on sensor technology, data fusion and data interpretation for site characterization

    International Nuclear Information System (INIS)

    Beckerman, M.

    1991-10-01

    In this report we discuss sensor technology, data fusion and data interpretation approaches of possible maximal usefulness for subsurface imaging and characterization of land-fill waste sites. Two sensor technologies, terrain conductivity using electromagnetic induction and ground penetrating radar, are described and the literature on the subject is reviewed. We identify the maximum entropy stochastic method as one providing a rigorously justifiable framework for fusing the sensor data, briefly summarize work done by us in this area, and examine some of the outstanding issues with regard to data fusion and interpretation. 25 refs., 17 figs

  9. Summary Report on Phase I Results from the 3D Printing in Zero G Technology Demonstration Mission, Volume I

    Science.gov (United States)

    Prater, T. J.; Bean, Q. A.; Beshears, R. D.; Rolin, T. D.; Werkheiser, N. J.; Ordonez, E. A.; Ryan, R. M.; Ledbetter, F. E., III

    2016-01-01

    Human space exploration to date has been confined to low-Earth orbit and the Moon. The International Space Station (ISS) provides a unique opportunity for researchers to prove out the technologies that will enable humans to safely live and work in space for longer periods of time and venture beyond the Earth/Moon system. The ability to manufacture parts in-space rather than launch them from Earth represents a fundamental shift in the current risk and logistics paradigm for human spaceflight. In September 2014, NASA, in partnership with Made In Space, Inc., launched the 3D Printing in Zero-G technology demonstration mission to explore the potential of additive manufacturing for in-space applications and demonstrate the capability to manufacture parts and tools on orbit using fused deposition modeling. This Technical Publication summarizes the results of testing to date of the ground control and flight prints from the first phase of this ISS payload.

  10. Gender differences on the job satisfaction in the phase of implementing advanced manufacturing technology in the Chinese manufacturing firms.

    Science.gov (United States)

    Yu, Na; Shen, Li Ming; Lewark, Siegfried

    2012-01-01

    This research gave an effort to study on gender differences in the job satisfaction for technological innovation at Chinese manufacturing firm. The exploratory study was conducted in four Chinese furniture manufacturing firms, which are all in the phases of introducing advanced manufacturing system. The results of statistical analysis show that general satisfaction of female employees to their jobs is significantly higher than male employees. In addition, supervisory satisfaction of female employees is significantly higher than male employees. The findings of the study reveal that activities are suggested to be carried out to increase the job satisfaction of male employees, especially improve communication and relationship between the managerial and the non-managerial levels in the innovation process. In addition, the higher job satisfaction of female employees could be considered a positive factor for the successful implementation of AMT in the technological innovation, although male employees are still dominated work force in the case study firms.

  11. Utility advanced turbine systems (ATS) technology readiness testing -- Phase 3. Annual report, October 1, 1996--September 30, 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the US Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown.

  12. A Review on Applicability of Big Data Technology in Nuclear Power Plant : Focused on O and M Phases

    International Nuclear Information System (INIS)

    Cha, Jae-Min; Shin, Junguk Shin; Yeom, Choong-Sub

    2015-01-01

    With the rapid growth of information and communication technology (ICT), data has been explosively increasing. It is the most important component of big data concept which derives values from the data. Recently, big data technology has been applied to plant industry such as oil and gas plant, steel and iron plant, and power plant as well as traditional industries including communication, manufacturing, distribution, banking, and so on. It means that the big data technology has a high opportunity to enhance operational performance from tremendous data collected from numerous sensors, which are generally attached to the Structures, Systems, and Components (SSCs). Gartner reported that 'the big data has high potential opportunities in Manufacturing and Natural Resource industry sector'. In the paper, we analyze the applicability of the big data technology in the NPP focusing on O and M phase. For this, the following sequence of process: Operational concept definition, Problem analysis, Needs derivation is conducted. This research has some limitations as follows. 1) Only monitoring and diagnosis part in the operational phase is considered in the whole plant lifecycle activities. That is, the necessity of big data should be derived in the comprehensive and diverse viewpoints. 2) Target interviewee is too small. That is, the more interviewee should be considered to increase the credibility of the research results. In the further study, to overcome the limitations of this research, we plan to validate the necessity via quantitative survey methods with more experts in the various plant cycles. We also attempt to show the practical impacts of big data through the practical application into the NPP

  13. A patent landscape analysis for organic photovoltaic solar cells: Identifying the technology's development phase

    NARCIS (Netherlands)

    Lizin, Sebastien; Leroy, Julie; Delvenne, Catherine; Dijk, Marc; De Schepper, Ellen; Van Passel, Steven

    2013-01-01

    Organic photovoltaics (OPV) have developed into a vast research area. Progress in various directions has made it difficult to monitor the technology's precise development state. We offer a patent landscape analysis over all OPV devices, their substrates and encapsulation materials to provide an

  14. Design of Training Systems, Phase II-A Report. An Educational Technology Assessment Model. Final Report.

    Science.gov (United States)

    Miller, Robert B.; Duffy, Larry R.

    Study results and design for an Educational Technology Assessment Model (ETAM) are outlined, and conclusions and recommendations of the study are summarized. An eight-task procedure is provided to guide the assessor of a training innovation through the required data collection and analysis steps leading to a decision to accept, reject, or continue…

  15. Diseño y validación de cuestionarios para la valoración del sistema ECTS

    Directory of Open Access Journals (Sweden)

    María Luisa PÉREZ CAÑADO

    2012-01-01

    Full Text Available Este artículo presenta en primicia el diseño y validación de cuatro baterías de cuestionarios (competencias, tiempo real de dedicación, metodología y satisfacción, que pone a disposición de la universidad española para su utilización en un diagnóstico del funcionamiento del sistema ECTS tanto en el área lingüística como en todos los ámbitos de la educación terciaria. El fin de todo ello es mejorar el funcionamiento del sistema ECTS y garantizar que las decisiones tomadas en relación con las nuevas enseñanzas universitarias oficiales se basen en datos empíricos y en referentes tanto nacionales como internacionales. Tras describir las características de cada cuestionario y presentar el número, la ordenación y la codificación de los ítems, el artículo detalla el proceso de validación en dos fases que se ha seguido para garantizar la fiabilidad de las cuatro baterías. Finalmente, presenta, en cinco apéndices, las versiones finales tanto para el profesorado como para el alumnado, las cuales están listas para ser aplicadas.

  16. Halftone information hiding technology based on phase feature of space filling curves

    Science.gov (United States)

    Hu, Jianhua; Cao, Peng; Dong, Zhihong; Cao, Xiaohe

    2017-08-01

    To solve the problems of the production of interference fringes (namely moiré in printing) and improve the image quality in printing process of halftone screening for information hiding, a halftone screening security technique based on the phase feature of space filling curves is studied in this paper. This method effectively solves the problem of moire and optimizes the quality of the screening, so that the images presented after screening have achieved good visual effect. The pseudo-random scrambling encryption of the plaintext information and the halftone screening technique based on the phase feature of the space filling curves are carried out when screening,which not only eliminates the common moire in the screening but also improves the image quality and the security of information.

  17. Optimized fringe patterns based on dual-frequency phase-shift technology in fringe projection profilometry

    Science.gov (United States)

    Yu, Hao; Lin, Liangzhao; Li, Xiaoying; Lu, Xiaoxu; Zhong, Liyun; Liu, Shengde

    2017-09-01

    A look-up table (LUT) method for solving the problem of phase unwrapping is presented. Considering the effect of noise on the unwrapping process, a concept called "tolerance" is advanced, and an associated algorithm called the "equipartition of tolerance" algorithm is proposed. The proposed algorithm eliminates the need for a high signal-to-noise ratio while retaining the LUT method's advantages of extended measurement range and high precision. Further, it improves the tolerance of the LUT method and enables reconstruction of discontinuous objects. In simulations and experiments conducted, the proposed algorithm successfully unwrapped the absolute phase of a slope model and a three-step model. The proposed algorithm is significantly more accurate and has better stability and sensitivity than the heterodyne algorithm.

  18. Fish tracking technology development. Phases 1 and 2, project definition desk study and equipment

    OpenAIRE

    Moore, A.; Potter, E.C.E.; Elson, J.

    1997-01-01

    The document reports on the major findings from a definition study to appraise the options to develop fish tracking equipment, in particular tags and data logging systems, in order to improve the effeciency of the Agency tracking studies and to obtain a greater understanding of fish biology. The definition study was in two parts. The first, Phase 1, collated and evaluated all the known tracking systems that may be suitable for studies of fish which are either produced commercially or have bee...

  19. ECT, rTMS, and deepTMS in pharmacoresistant drug-free patients with unipolar depression: a comparative review

    Directory of Open Access Journals (Sweden)

    Salviati M

    2012-01-01

    Full Text Available Amedeo Minichino¹, Francesco Saverio Bersani¹, Enrico Capra¹, Rossella Pannese¹, Celeste Bonanno², Massimo Salviati¹, Roberto Delle Chiaie¹, Massimo Biondi¹¹Department of Neurology and Psychiatry, Sapienza University of Rome, Rome, ²Aldo Moro University of Bari, Bari, ItalyBackground: Biological treatments are considered as additional options for the treatment of resistant unipolar depression. Controversial data exist about the efficacy and tolerability of three of the most used somatic treatments: electroconvulsive therapy (ECT, transcranial magnetic stimulation (rTMS, and deep transcranial magnetic stimulation (deepTMS. The aim of this review is to investigate and compare the efficacy and tolerability of these three techniques in drug-free patients with pharmacoresistant unipolar depression.Methods: Three independent reviewers extracted data and assessed the quality of methodological reporting of selected studies. The first outcome was the clinical response to the three different techniques defined as a percentage improvement of Hamilton Depression Rating Scale (HDRS. The second outcome was the evaluation of their neuropsychological effects. The third outcome was the evaluation of the number of remitted patients; remission was defined as an absolute HDRS-24 score of ≤11 or as an absolute HDRS-17 score of ≤8. Tolerability was the fourth outcome; it was evaluated by examining the number of dropped-out patients.Results: The comparative evaluation of HDRS percentage variations shows ECT as the most effective method after 4 weeks of therapy; on the other hand, a better efficacy is obtainable by deepTMS after 2 weeks of therapy. DeepTMS is the technique that gives the best improvement of cognitive performances. The percentage of remitted patients obtained with ECT treatment is the same obtained in the deepTMS group. Both techniques have a remitted patients percentage two times larger than the rTMS. DeepTMS shows a tolerability

  20. ARCAL. Regional co-operative arrangements for the promotion of nuclear science and technology in Latin America, Phase I (1985-1990)

    International Nuclear Information System (INIS)

    Gillen, V.A.

    1990-09-01

    The Regional Co-operative Arrangement for the Promotion of Nuclear Science and Technology in Latin America, ARCAL, has completed its first five-year phase (1985-1989). This booklet summarizes the first phase of the ARCAL programme and contains descriptions of projects in the fields of agriculture, medicine, industry and energy

  1. International academic program in technologies of light-water nuclear reactors. Phases of development and implementation

    International Nuclear Information System (INIS)

    Geraskin, N I; Glebov, V B

    2017-01-01

    The results of implementation of European educational projects CORONA and CORONA II dedicated to preserving and further developing nuclear knowledge and competencies in the area of technologies of light-water nuclear reactors are analyzed. Present article addresses issues of design and implementation of the program for specialized training in the branch of technologies of light-water nuclear reactors. The systematic approach has been used to construct the program for students of nuclear specialties, which corresponding to IAEA standards and commonly accepted nuclear principles recognized in the European Union. Possibilities of further development of the international cooperation between countries and educational institutions are analyzed. Special attention is paid to e-learning/distance training, nuclear knowledge preservation and interaction with European Nuclear Education Network. (paper)

  2. Hospital budget increase for information technology during phase 1 meaningful use.

    Science.gov (United States)

    Neumeier, Harold; Berner, Eta S; Burke, Darrell E; Azuero, Andres

    2015-01-01

    Federal policies have a significant effect on how businesses spend money. The 2009 HITECH (Health Information Technology for Economic and Clinical Health Act) authorized incentive payments through Medicare and Medicaid to clinicians and hospitals when they use certified electronic health records privately and securely to achieve specified improvements in care delivery. Federal incentive payments were offered in 2011 for hospitals that had satisfied "meaningful use" criteria. A longitudinal study of nonfederal hospital information technology (IT) budgets (N = 493) during the years 2009 to 2011 found increases in the percentage of hospital annual operating budgets allocated to IT in the years leading up to these federal incentives. This increase was most pronounced among hospitals receiving high proportions of their reimbursements from Medicaid, followed by hospitals receiving high proportions of their reimbursements from Medicare, possibly indicating a budget shift during this period to more IT spending to achieve meaningful-use policy guidelines.

  3. International academic program in technologies of light-water nuclear reactors. Phases of development and implementation

    Science.gov (United States)

    Geraskin, N. I.; Glebov, V. B.

    2017-01-01

    The results of implementation of European educational projects CORONA and CORONA II dedicated to preserving and further developing nuclear knowledge and competencies in the area of technologies of light-water nuclear reactors are analyzed. Present article addresses issues of design and implementation of the program for specialized training in the branch of technologies of light-water nuclear reactors. The systematic approach has been used to construct the program for students of nuclear specialties, which corresponding to IAEA standards and commonly accepted nuclear principles recognized in the European Union. Possibilities of further development of the international cooperation between countries and educational institutions are analyzed. Special attention is paid to e-learning/distance training, nuclear knowledge preservation and interaction with European Nuclear Education Network.

  4. Nano-Launcher Technologies, Approaches, and Life Cycle Assessment. Phase II

    Science.gov (United States)

    Zapata, Edgar

    2014-01-01

    Assist in understanding NASA technology and investment approaches, and other driving factors, necessary for enabling dedicated nano-launchers by industry at a cost and flight rate that (1) could support and be supported by an emerging nano-satellite market and (2) would benefit NASAs needs. Develop life-cycle cost, performance and other NASA analysis tools or models required to understand issues, drivers and challenges.

  5. Design of Training Systems, Phase II-A Report. An Educational Technology Assessment Model (ETAM)

    Science.gov (United States)

    1975-07-01

    display tube that may be less expensive than sequences developed manually. The Walt Disney studios have an extensive technology for creating animation...REPORT NO. 12-3 TASK SUBTASK PAGE 05 05 03 Fixed sequential frames or items — for example, the standard Kodak carousel, or slide film , or a...speaking, singing or in learning to pronounce in a foreign language . Interpersonal Interaction: Apprehending and presenting information to other

  6. Materials, process, product analysis of coal process technology. Phase I final report

    Energy Technology Data Exchange (ETDEWEB)

    Saxton, J. C.; Roig, R. W.; Loridan, A.; Leggett, N. E.; Capell, R. G.; Humpstone, C. C.; Mudry, R. N.; Ayres, E.

    1976-02-01

    The purpose of materials-process-product analysis is a systematic evaluation of alternative manufacturing processes--in this case processes for converting coal into energy and material products that can supplement or replace petroleum-based products. The methodological steps in the analysis include: Definition of functional operations that enter into coal conversion processes, and modeling of alternative, competing methods to accomplish these functions; compilation of all feasible conversion processes that can be assembled from combinations of competing methods for the functional operations; systematic, iterative evaluation of all feasible conversion processes under a variety of economic situations, environmental constraints, and projected technological advances; and aggregative assessments (economic and environmental) of various industrial development scenarios. An integral part of the present project is additional development of the existing computer model to include: A data base for coal-related materials and coal conversion processes; and an algorithmic structure that facilitates the iterative, systematic evaluations in response to exogenously specified variables, such as tax policy, environmental limitations, and changes in process technology and costs. As an analytical tool, the analysis is intended to satisfy the needs of an analyst working at the process selection level, for example, with respect to the allocation of RDandD funds to competing technologies.

  7. Vitrification technologies for Weldon Spring raffinate sludges and contaminated soils: Phase I report: Development of alternatives

    International Nuclear Information System (INIS)

    Koegler, S.S.; Oma, K.H.; Perez, J.M. Jr.

    1988-12-01

    This engineering evaluation was conducted to evaluate vitrification technologies for remediation of raffinate sludges, quarry refuse, and contaminated soils at the Weldon Spring site in St. Charles County, Missouri. Two technologies were evaluated: in situ vitrification (ISV) and the joule-heated ceramic melter (JHCM). Both technologies would be effective at the Weldon Spring site. For ISV, there are two processing options for each type of waste: vitrify the waste in place, or move the waste to a staging area and then vitrify. The total time required to vitrify raffinate sludges, quarry refuse, and contaminated soil is estimated at 5 to 6 years, with operating costs of $65.7M for staged operations or $110M for in-place treatment. This estimate does not include costs for excavation and transportation of wastes to the staging location. Additional tests are recommended to provide a more in-depth evaluation of the processing options and costs. For the JHCM process, about 6.5 years would be required to vitrify the three waste types. Total operating costs are estimated to be $73M if the glass is produced in granular form, and $97M if the glass is cast into canisters. Costs for the excavation and transportation of wastes are beyond the scope of this study and are not included in the estimates. Additional tests are also recommended to better define technical issues and costs. 10 refs., 2 figs., 5 tabs

  8. Electroconvulsive therapy (ECT) and aerobic exercise training (AET) increased plasma BDNF and ameliorated depressive symptoms in patients suffering from major depressive disorder.

    Science.gov (United States)

    Salehi, Iraj; Hosseini, Seyed Mohammad; Haghighi, Mohammad; Jahangard, Leila; Bajoghli, Hafez; Gerber, Markus; Pühse, Uwe; Holsboer-Trachsler, Edith; Brand, Serge

    2016-05-01

    To treat patients suffering from major depressive disorder (MDD), research has focused on electroconvulsive therapy (ECT) and aerobic exercise training (AET). Brain derived neurotrophic factor (BDNF) seems to be key in MDD. The aims of the present study were therefore two-fold, to investigate in a three-arm interventional study the differential effects of ECT, ECT plus AET, and AET alone in patients suffering from TR-MDD on 1. depressive symptoms and 2. plasma BDNF (pBDNF). 60 patients with MDD (mean age: 31 years; 31.6% female patients) were randomly assigned either to the ECT, ECT + AET, or AET condition. The AET condition consisted of treadmill exercise for 45 min, three times a week. Both depression severity and pBDNF levels were assessed at baseline and 4 weeks later. All patients were further treated with an SSRI standard medication. pBDNF levels increased over time in all three study conditions, though, highest increase was observed in the ECT + EAT condition, and lowest increase was observed in the AET condition. Depressive symptoms decreased in all three conditions over time, though, strongest decrease was observed in the ECT + AET condition. The combination of ECT + AET led to significantly greater remission rates than in either the ECT or AET alone conditions. BDNF levels were not associated with symptoms of depression. The pattern of results suggests that ECT, AET and particularly their combination are promising directions for the treatment of patients suffering from MDD, and that it remains unclear to what extent pBDNF is key and a reliable biomarker for MDD. Copyright © 2016 Elsevier Ltd. All rights reserved.

  9. Changes in the levels of kynurenic acid and selected proinflammatory cytokines after pharmacological treatment and electroconvulsive therapy (ECT in patients with depressive disorder

    Directory of Open Access Journals (Sweden)

    Olajossy Marcin

    2016-06-01

    Full Text Available The aim of the present study was to compare the concentrations of KYNA, 3-OH-KYN and the cytokines TNF-α and IL-6 in patients with depression vs. healthy controls as well as in patients with depression treated pharmacologically vs. those treated using ECT. We also evaluated the relationship between the concentrations of KYNA, 3-OH-KYN and the cytokines TNF-α and IL-6 and clinical improvement measured on the MADRS scale in patients treated pharmacologically and those treated with ECT.

  10. Embarazo ectópico ovárico: experiencia en 10 años del Hospital Universitario La Paz, Madrid, España

    OpenAIRE

    González B,Cristina; Salas B,Patricia Isabel; Hernández G,Alicia; de Santiago G,Javier

    2012-01-01

    La gestación ectópica ovárica es muy infrecuente, presentando una incidencia de 1/2100-7000 gestaciones (0,5-3% de todos los ectópicos). Su diagnóstico es difícil y dada la poca experiencia, no está claro el tratamiento más adecuado. Se presentan seis casos clínicos, recogidos en nuestro hospital desde 2001 hasta 2011, destacando el difícil diagnóstico prequirúrgico así como el tratamiento realizado.

  11. Production of ethanol from refinery waste gases. Phase 2, technology development, annual report

    Energy Technology Data Exchange (ETDEWEB)

    Arora, D.; Basu, R.; Phillips, J.R.; Wikstrom, C.V.; Clausen, E.C.; Gaddy, J.L.

    1995-07-01

    Oil refineries discharge large volumes of H{sub 2}, CO, and CO{sub 2} from cracking, coking, and hydrotreating operations. This program seeks to develop a biological process for converting these waste gases into ethanol, which can be blended with gasoline to reduce emissions. Production of ethanol from all 194 US refineries would save 450 billion BTU annually, would reduce crude oil imports by 110 million barrels/year and emissions by 19 million tons/year. Phase II efforts has yielded at least 3 cultures (Clostridium ljungdahlii, Isolate O-52, Isolate C-01) which are able to produce commercially viable concentrations of ethanol from CO, CO{sub 2}, and H{sub 2} in petroleum waste gas. Single continuous stirred tank reactor studies have shown that 15-20 g/L of ethanol can be produced, with less than 5 g/L acetic acid byproduct. Culture and reactor optimization in Phase III should yield even higher ethanol concentrations and minimal acetic acid. Product recovery studies showed that ethanol is best recovered in a multi-step process involving solvent extraction/distillation to azeotrope/azeotropic distillation or pervaporation, or direct distillation to the azeotrope/azeotropic distillation or pervaporation. Projections show that the ethanol facility for a typical refinery would require an investment of about $30 million, which would be returned in less than 2 years.

  12. Human resource development in the beginning phase of nuclear technology development in Japan

    International Nuclear Information System (INIS)

    Yamashita, Kiyonobu

    2015-01-01

    Japan Research Reactor No.1 (JRR-1) was constructed as the first nuclear reactor in Japan and reached the first criticality in 1957. The construction of both the first BWR and the first PWR were started in the same year 1967 and they started power operation in the same year 1970. Engineers of electrical utilities and vendors gave efforts to have knowledge for reactor engineering mainly on the job training with high self-motivation to contribute for nuclear technology development. A part of them participated in the reactor engineering training course of the JAERI. (author)

  13. UTILITY ADVANCED TURBINE SYSTEMS (ATS) TECHNOLOGY READINESS TESTING PHASE 3 RESTRUCTURED (3R); TOPICAL

    International Nuclear Information System (INIS)

    Unknown

    1999-01-01

    In the early 90's GE recognized the need to introduce new technology to follow on to the ''F'' technology the Company introduced in 1988. By working with industry and DOE, GE helped shape the ATS program goal of demonstrating a gas turbine, combined-cycle system using natural gas as the primary fuel that achieves the following targets: system efficiency exceeding 60% lower heating value basis; environmental superiority under full-load operating conditions without the use of post-combustion emissions controls, environmental superiority includes limiting NO(sub 2) to less than 10 parts per mission by volume (dry basis) at 15% oxygen; busbar energy costs that are 10% less than current state-of-the-art turbine systems meeting the same environmental requirements; fuel-flexible designs operating on natural gas but also capable of being adapted to operate on coal-based, distillate, or biomass fuels; reliability-availability-maintainability (RAM) that is equivalent to modern advanced power generation systems; and commercial systems that could enter the market in the year 2000

  14. Bond quality control of aluminium stabilised superconductors with ultrasonic phased-array technology

    International Nuclear Information System (INIS)

    Neuenschwander, J.; Luethi, T.; Horvath, I.L.

    2001-01-01

    Novel aluminium stabilised superconductors are currently being produced for the Large Hadron Collider detectors ATLAS and CMS. For a satisfying service of the conductor an intact bonding between the different constituents must be guaranteed. We have shown previously that ultrasonics is a powerful tool for checking the bond quality. However, up to now the full width of the bond could be inspected only on short samples with a mechanical scanner. The essence of this presentation is the introduction of the phased-array technique which allows a continuous analysis of the complete bond over km-long conductor units during their manufacture. For now, more than 50 km of conductor have been tested during co-extrusion. Disbondings are detected as regions with enhanced echo-amplitudes. We are about to set-up a second system for the control of an electron beam welding process which is used for the reinforcement of the CMS conductor. (orig.)

  15. Advanced hydrogen/methanol utilization technology demonstration. Phase II: Hydrogen cold start of a methanol vehicle

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-05-01

    This is the Phase 11 Final Report on NREL Subcontract No. XR-2-11175-1 {open_quotes}Advanced Hydrogen/Methane Utilization Demonstration{close_quotes} between the National Renewable Energy Laboratory (NREL), Alternative Fuels Utilization Program, Golden, Colorado and Hydrogen Consultants, Inc. (HCI), Littleton, Colorado. Mr. Chris Colucci was NREL`s Technical Monitor. Colorado State University`s (CSU) Engines and Energy Conversion Laboratory was HCI`s subcontractor. Some of the vehicle test work was carried out at the National Center for Vehicle Emissions Control and Safety (NCVECS) at CSU. The collaboration of the Colorado School of Mines is also gratefully acknowledged. Hydrogen is unique among alternative fuels in its ability to burn over a wide range of mixtures in air with no carbon-related combustion products. Hydrogen also has the ability to burn on a catalyst, starting from room temperature. Hydrogen can be made from a variety of renewable energy resources and is expected to become a widely used energy carrier in the sustainable energy system of the future. One way to make a start toward widespread use of hydrogen in the energy system is to use it sparingly with other alternative fuels. The Phase I work showed that strong affects could be achieved with dilute concentrations of hydrogen in methane (11). Reductions in emissions greater than the proportion of hydrogen in the fuel provide a form of leverage to stimulate the early introduction of hydrogen. Per energy unit or per dollar of hydrogen, a greater benefit is derived than simply displacing fossil-fueled vehicles with pure hydrogen vehicles.

  16. Mouse repeated electroconvulsive seizure (ECS) does not reverse social stress effects but does induce behavioral and hippocampal changes relevant to electroconvulsive therapy (ECT) side-effects in the treatment of depression

    NARCIS (Netherlands)

    van Buel, Erin M; Sigrist, Hannes; Seifritz, Erich; Fikse, Lianne; Bosker, Fokko J; Schoevers, Robert A; Klein, Hans C; Pryce, Christopher R; Eisel, Ulrich Lm

    2017-01-01

    Electroconvulsive therapy (ECT) is an effective treatment for depression, but can have negative side effects including amnesia. The mechanisms of action underlying both the antidepressant and side effects of ECT are not well understood. An equivalent manipulation that is conducted in experimental

  17. Phase transformations in synthesis technologies and sorption properties of zeolites from coal fly ash

    Directory of Open Access Journals (Sweden)

    О. Б. Котова

    2016-08-01

    Full Text Available Coal fly ash is generated in the course of combustion of coal at thermal power plants. Environmental problems increase sharply without disposing that industrial waste. Technologies were tested of hydrothermal synthesis of zeolites from fly ash forming during combustion of coal at thermal power plants of the Pechora coal basin and dependences were identified of the experiment conditions on physical and chemical properties of the end product. It is demonstrated that synthesizing zeolites from fly ash is the first stage of forming ceramic materials (ceramic membranes, which defines the fundamental character (importance of that area of studies. It was for the first time that sorption and structural characteristics and cation-exchange properties of fly ash from the Pechora basin coals were studied with respect to, Ba2+ and Sr2+.

  18. Test and Approval Center for Fuel Cell and Hydrogen Technologies: Phase I. Initiation

    DEFF Research Database (Denmark)

    and the mitigation of the human-caused global warming. Fuel cells (in particular solid oxide fuel cells) produce electricity and heat at higher efficiencies than conventional power plants. They emit less pollutants - for example no toxic NOx at all - than conventional plants do. Fuel cells can operate on fossil...... fuels (natural gas) and on alternative fuels as well. They can therefore bridge the gap between availability and efficient use of fossil fuels on the short term and establishment of an energy market based on renewables on the long term. Hydrogen is a zero carbon energy carrier that– just like......Fuel cells and hydrogen technologies hold the potential for decreasing emissions of greenhouse gases and air pollutants, for facilitating the increased use of renewable energy sources with high efficiencies and thereby contributing to the establishment of a sustainable energy system...

  19. Colpotomia no tratamento da gestação ectópica Treating ectopic pregnancy with colpotomy

    Directory of Open Access Journals (Sweden)

    Heleodoro Corrêa Pinto

    2012-03-01

    Full Text Available OBJETIVO: Relatar o uso da colpotomia para o tratamento de gestações ectópicas. MÉTODOS: Estudo transversal retrospectivo. Foram incluídos todos os casos internados com suspeita clínico-laboratorial de gestação ectópica que não preenchiam critérios para tratamento medicamentoso com Methotrexato no período de fevereiro de 2007 a agosto de 2008. Foram analisadas variáveis demográficas, história ginecológica e características associadas ao tratamento foram obtidas através de revisão de prontuário. RESULTADOS: Dezoito mulheres foram incluídas no estudo. A média de idade foi de 27±5,2 anos. Todos os casos apresentavam gestação ectópica rota e todas as pacientes foram submetidas à salpingectomia parcial. O tempo cirúrgico variou de 30 a 120 minutos (média de 64,5 minutos, sendo contabilizado desde o momento de entrada da paciente na sala cirúrgica até o horário da saída. Nenhuma paciente apresentou infecção pós-operatória. O tempo médio de internação foi de 40± 14,3 horas. As medicações utilizadas no período pós-operatório foram semelhantes em todos os casos, sendo baseadas em anti-inflamatório não esteroide, dipirona, paracetamol e meperidina, conforme a necessidade. A dieta foi reintroduzida 8 horas após o término da cirurgia. CONCLUSÕES: A utilização da colpotomia no tratamento da gestação ectópica apresentou bons resultados, com ausência de complicações importantes e tempo de internação curto. O instrumental cirúrgico básico para a realização desse procedimento é relativamente comum a todos os hospitais, e a técnica cirúrgica é reprodutível.PURPOSE: To report the use of colpotomy for the treatment of ectopic pregnancies. METHODS: This was a retrospective cross-sectional study conducted on all women hospitalized with a clinical-laboratory suspicion of ectopic pregnancy who did not fulfill the criteria for drug treatment with methothrexate, during the period from February 2007 to

  20. Hiperplasia paratiroidea ectópica de doble localización, intratiroidea e intratorácica

    Directory of Open Access Journals (Sweden)

    Francisco Avello Canisto

    2013-10-01

    Full Text Available Se presenta el caso de una paciente sometida satisfactoriamente a hemitiroidectomía izquierda por diagnóstico de bocio nodular. El estudio anátomo-patológico de la pieza operatoria informó que el aumento de tamaño del lóbulo tiroideo izquierdo se debía a glándula paratiroides hiperplásica intratiroidea. Con este resultado se solicitó gammagrafía paratiroidea, en la que se encontró un área de captación en la región torácica derecha. Se concluyó que se trató de hiperplasia paratiroidea ectópica de doble localización, intratiroidea e intratorácica.

  1. Luteal Phase Support in assisted reproductive technology treatment: focus on Endometrin(R) (progesterone) vaginal insert.

    Science.gov (United States)

    Check, Jerome H

    2009-08-01

    Supplementation of progesterone in the luteal phase and continuance of progesterone therapy during the first trimester has been found in several studies to have benefits in promoting fertility, preventing miscarriages and even preventing pre-term labor. Though it can be administered orally, intramuscularly or even sublingually, a very effective route with fewer side effects can be achieved by an intravaginal route. The first vaginal preparations were not made commercially but were compounded by pharmacies. This had the disadvantage of lack of control by the Food and Drug Administration (FDA) ensuring efficacy of the preparations. Furthermore there was a lack of precise dosing leading to batch to batch variation. The first commercially approved vaginal progesterone preparation in the United States was a vaginal gel which has proven very effective. The main side effect was accumulation of a buildup of the vaginal gel sometimes leading to irritation. Natural micronized progesterone for vaginal administration with the brand name of Utrogestan A((R)) had been approved even before the gel in certain European countries. Endometrin((R)) vaginal tablets are the newest natural progesterone approved by the FDA. Comparisons to the vaginal gel and to intramuscular progesterone have shown similar efficacy especially in studies following controlled ovarian hyperstimulation and oocyte egg retrieval and embryo transfer. Larger studies are needed to compare side effects.

  2. Water treatment system for utilities: Phase 1 -- Technology assessment. Interim report

    International Nuclear Information System (INIS)

    Janss, T.M.; Tucker, R.E.

    1997-12-01

    A conceptual design for a water treatment system to reduce pollutants in manhole and vault water is presented as an alternative to current water disposal practices. Runoff and groundwater seepage that collects in vaults and manholes contains, or is likely to contain, concentrations of pollutants in excess of regulatory guidelines. Pollutants commonly present in storm water runoff consist of lead, cadmium, oil, grease and asbestos. The conceptual design presents the basis for a water treatment system that will reduce pollutant concentrations to levels below regulatory thresholds. The water treatment system is relatively inexpensive, small and simple to operate. A strainer is used to remove gross particulates, which are then stored for disposal. Utilizing centrifugal force, vault and manhole water is separated into constituent fractions including fine particulates, inorganics and oils. Fine particulates are stored with gross particulates for disposal. Chemical fixation is used to stabilize inorganics. Organic substances are stored for disposal. The water treatment system uses a granular activated carbon filter as an effluent polish to adsorb the remaining pollutants from the effluent water stream. The water can be discharged to the street or storm drain and the pollutants are stored for disposal as non-hazardous waste. This system represents a method to reduce pollutant volumes, reduced disposal costs and reduce corporate environmental liability. It should be noted that the initial phase of the development process is still in progress. This report is presented to reflect work in progress and as such should be considered preliminary

  3. Revealing complete complex KIR haplotypes phased by long-read sequencing technology.

    Science.gov (United States)

    Roe, D; Vierra-Green, C; Pyo, C-W; Eng, K; Hall, R; Kuang, R; Spellman, S; Ranade, S; Geraghty, D E; Maiers, M

    2017-09-01

    The killer cell immunoglobulin-like receptor (KIR) region of human chromosome 19 contains up to 16 genes for natural killer (NK) cell receptors that recognize human leukocyte antigen (HLA)/peptide complexes and other ligands. The KIR proteins fulfill functional roles in infections, pregnancy, autoimmune diseases and transplantation. However, their characterization remains a constant challenge. Not only are the genes highly homologous due to their recent evolution by tandem duplications, but the region is structurally dynamic due to frequent transposon-mediated recombination. A sequencing approach that precisely captures the complexity of KIR haplotypes for functional annotation is desirable. We present a unique approach to haplotype the KIR loci using single-molecule, real-time (SMRT) sequencing. Using this method, we have-for the first time-comprehensively sequenced and phased sixteen KIR haplotypes from eight individuals without imputation. The information revealed four novel haplotype structures, a novel gene-fusion allele, novel and confirmed insertion/deletion events, a homozygous individual, and overall diversity for the structural haplotypes and their alleles. These KIR haplotypes augment our existing knowledge by providing high-quality references, evolutionary informers, and source material for imputation. The haplotype sequences and gene annotations provide alternative loci for the KIR region in the human genome reference GrCh38.p8.

  4. Clean synthesis of molecular recognition polymeric materials with chiral sensing capability using supercritical fluid technology. Application as HPLC stationary phases.

    Science.gov (United States)

    da Silva, Mara Soares; Vão, Eva R; Temtem, Márcio; Mafra, Luís; Caldeira, Jorge; Aguiar-Ricardo, Ana; Casimiro, Teresa

    2010-03-15

    Molecularly imprinted polymers (MIPs) of poly(ethylene glycol dimethacrylate) and poly(N-isopropylacrylamide-co-ethylene glycol dimethacrylate) were synthesized for the first time in supercritical carbon dioxide (scCO(2)), using Boc-L-tryptophan as template. Supercritical fluid technology provides a clean and one-step synthetic route for the preparation of affinity polymeric materials with sensing capability for specific molecules. The polymeric materials were tested as stationary HPLC phases for the enantiomeric separation of L- and D-tryptophan. HPLC results prove that the synthesized MIPs are able to recognize the template molecule towards its enantiomer which opens up potential applications in chromatographic chiral separation. (c) 2009 Elsevier B.V. All rights reserved.

  5. Development of Evaluation Technology for Prevention of Two-Phase FAC on Carbon Steel

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Kyung Mo; Shim, Heesang; Lee, Eun Hee; Hur, Do Haeng [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-05-15

    There are many pipelines to be managed from wall thinning by flow accelerated corrosion (FAC) in the secondary system of a nuclear power. FAC is a process in which a normally protective oxide layer on the internal carbon or low-alloy steel piping surface dissolves into a stream of flowing water or a wet steam mixture. In this process, the oxide layer becomes thinner and the corrosion rate increases until the corrosion rate and dissolution rates are equal. Recent researches and reports indicate that the FAC problem is prevalent in spite of the development of an inspection method and management skills applying computer programs. Therefore, it is important to mitigate or prevent FAC on the carbon steel, and surface coating technology has been investigated for pipeline systems in a steam flow. Since the occurrence of a Surry-2 pipe rupture accident, a lot of effort has been made to manage the FAC of carbon steel piping. Some of the chemicals were known as a corrosion inhibitor. Bateman et al. reported that the addition of Ti may decrease the FAC rate of carbon steel by ∼ 65 %, TiO{sub 2} was also effective in mitigating the stress corrosion cracking of steam generator tubes under concentrated crevice conditions. A platinum doping method was applied as another mitigation strategy of carbon steel wall thinning. Noble metal, including Pt, had produced the layers of a very high catalyst concentration and this catalytic effect induced a lower corrosion potential for nickel alloys.

  6. Solid Waste Processing: An Essential Technology for the Early Phases of Mars Exploration and Colonization

    Science.gov (United States)

    Wignarajah, Kanapathipillai; Pisharody, Suresh; Fisher, John; Flynn, Michael; Kliss, Mark (Technical Monitor)

    1997-01-01

    Terraforming of Mars is the long-term goal of colonization of Mars. However, this process is likely to be a very slow process and conservative estimates involving a synergic, technocentric approach estimate that it may take around 10,000 years before the planet can be parallel to that of Earth and where humans can live in open systems. Hence, any early missions will require the presence of a closed life support system where all wastes, both solids and liquids, will need to be recycled or where all consumables will need to be supplied. The economics of both are often a matter of speculation and conjecture, but some attempt is made here to evaluate the choice. If a choice is made to completely resupply and eject the waste mass, a number of unknown issues are at hand. On the other hand, processing of the wastes, will enable predictability and reliability of the ecosystem. Solid wastes though smaller in volume and mass than the liquid wastes contains more than 90% of the essential elements required by humans and plants. Further, if left unprocessed they present a serious risk to human health. This paper presents the use of well established technology in processing solid wastes, ensuring that the biogeochemical cycles of ecosystems are maintained, reliability of the closed life support system maintained and the establishment of the early processes necessary for the permanent presence of humans on Mars.

  7. Development of Evaluation Technology for Prevention of Two-Phase FAC on Carbon Steel

    International Nuclear Information System (INIS)

    Kim, Kyung Mo; Shim, Heesang; Lee, Eun Hee; Hur, Do Haeng

    2014-01-01

    There are many pipelines to be managed from wall thinning by flow accelerated corrosion (FAC) in the secondary system of a nuclear power. FAC is a process in which a normally protective oxide layer on the internal carbon or low-alloy steel piping surface dissolves into a stream of flowing water or a wet steam mixture. In this process, the oxide layer becomes thinner and the corrosion rate increases until the corrosion rate and dissolution rates are equal. Recent researches and reports indicate that the FAC problem is prevalent in spite of the development of an inspection method and management skills applying computer programs. Therefore, it is important to mitigate or prevent FAC on the carbon steel, and surface coating technology has been investigated for pipeline systems in a steam flow. Since the occurrence of a Surry-2 pipe rupture accident, a lot of effort has been made to manage the FAC of carbon steel piping. Some of the chemicals were known as a corrosion inhibitor. Bateman et al. reported that the addition of Ti may decrease the FAC rate of carbon steel by ∼ 65 %, TiO 2 was also effective in mitigating the stress corrosion cracking of steam generator tubes under concentrated crevice conditions. A platinum doping method was applied as another mitigation strategy of carbon steel wall thinning. Noble metal, including Pt, had produced the layers of a very high catalyst concentration and this catalytic effect induced a lower corrosion potential for nickel alloys

  8. Advanced powder metallurgy aluminum alloys via rapid solidification technology, phase 2

    Science.gov (United States)

    Ray, Ranjan; Jha, Sunil C.

    1987-01-01

    Marko's rapid solidification technology was applied to processing high strength aluminum alloys. Four classes of alloys, namely, Al-Li based (class 1), 2124 type (class 2), high temperature Al-Fe-Mo (class 3), and PM X7091 type (class 4) alloy, were produced as melt-spun ribbons. The ribbons were pulverized, cold compacted, hot-degassed, and consolidated through single or double stage extrusion. The mechanical properties of all four classes of alloys were measured at room and elevated temperatures and their microstructures were investigated optically and through electron microscopy. The microstructure of class 1 Al-Li-Mg alloy was predominantly unrecrystallized due to Zr addition. Yield strengths to the order of 50 Ksi were obtained, but tensile elongation in most cases remained below 2 percent. The class 2 alloys were modified composition of 2124 aluminum alloy, through addition of 0.6 weight percent Zr and 1 weight percent Ni. Nickel addition gave rise to a fine dispersion of intermetallic particles resisting coarsening during elevated temperature exposure. The class 2 alloy showed good combination of tensile strength and ductility and retained high strength after 1000 hour exposure at 177 C. The class 3 Al-Fe-Mo alloy showed high strength and good ductility both at room and high temperatures. The yield and tensile strength of class 4 alloy exceeded those of the commercial 7075 aluminum alloy.

  9. Feasibility study of modern airships, phase 1, volume 1. [structural design criteria/technology assessment

    Science.gov (United States)

    Joner, B.

    1975-01-01

    The history of the airship is examined from a technical and operational/mission point of view. The impact on a modern airship design by present technology is defined in some selected, representative areas through a comparison between 1930 and 1975 state-of-the-art. A survey of missions with a potential for the airship was made and some viable applications are established. Several concepts of modern airships were taken through a parametric design analysis in the missions previously established, evolving in a new configuration of a hybrid airship - the Helipsoid -, combining static lift and dynamic lift from tilting propeller/rotors and the planform. Cruise speeds in the 150-200 kt (77-103 m/s) will be possible with this configuration with reasonable engine power. The Helipsoid offers at the same time a realistic and practicable solution to the ballast problem, which is inherent in a vehicle generating its lift (fully or partially) from a medium lighter than air.

  10. Investigation of the Chiral Magnetic Effect using Event Shape Engineering in Pb–Pb collisions at √sNN = 5.02 TeV

    CERN Document Server

    Huang, Yiwen

    2018-01-01

    The fluctuations in the initial energy density of heavy-ion collisions, reflected in the event-by-event variation of elliptic flow v2, allow an efficient selection of events corresponding to specific initial geometries. This technique, Event Shape Engineering, has been used to search for the Chiral Magnetic Effect (CME), a parity violating effect of the strong interaction. The three-particle correlator γαβ = hcos(ϕα + ϕβ − 2Ψ2)i, calculated for different combinations of charges α and β, has been employed to disentangle the CME signal from background effects in Pb–Pb collisions at √sNN = 5.02 TeV recorded by the ALICE detector. In order to constrain the CME contribution to the measured correlations, the charge-dependence of γαβ is compared with the expectations for the CME signal based on Monte Carlo calculations with magnetic field of spectators.

  11. Privacy as personality right: why the ECtHR’s focus on ulterior interests might prove indispensable in the age of Big Data

    NARCIS (Netherlands)

    van der Sloot, B.

    2015-01-01

    Article 8 ECHR was adopted as a classic negative right, which provides the citizen protection from unlawful and arbitrary interference by the state with his private and family life, home and communication. The ECtHR, however, has gradually broadened its scope so that the right to privacy encroaches

  12. Study of key technology of ghost imaging via compressive sensing for a phase object based on phase-shifting digital holography

    International Nuclear Information System (INIS)

    Leihong, Zhang; Dong, Liang; Bei, Li; Zilan, Pan; Dawei, Zhang; Xiuhua, Ma

    2015-01-01

    In this article, the algorithm of compressing sensing is used to improve the imaging resolution and realize ghost imaging via compressive sensing for a phase object based on the theoretical analysis of the lensless Fourier imaging of the algorithm of ghost imaging based on phase-shifting digital holography. The algorithm of ghost imaging via compressive sensing based on phase-shifting digital holography uses the bucket detector to measure the total light intensity of the interference and the four-step phase-shifting method is used to obtain the total light intensity of differential interference light. The experimental platform is built based on the software simulation, and the experimental results show that the algorithm of ghost imaging via compressive sensing based on phase-shifting digital holography can obtain the high-resolution phase distribution figure of the phase object. With the same sampling times, the phase clarity of the phase distribution figure obtained by the algorithm of ghost imaging via compressive sensing based on phase-shifting digital holography is higher than that obtained by the algorithm of ghost imaging based on phase-shift digital holography. In this article, this study further extends the application range of ghost imaging and obtains the phase distribution of the phase object. (letter)

  13. Synthesis of 5-hydroxyectoine from ectoine: crystal structure of the non-heme iron(II and 2-oxoglutarate-dependent dioxygenase EctD.

    Directory of Open Access Journals (Sweden)

    Klaus Reuter

    2010-05-01

    Full Text Available As a response to high osmolality, many microorganisms synthesize various types of compatible solutes. These organic osmolytes aid in offsetting the detrimental effects of low water activity on cell physiology. One of these compatible solutes is ectoine. A sub-group of the ectoine producer's enzymatically convert this tetrahydropyrimidine into a hydroxylated derivative, 5-hydroxyectoine. This compound also functions as an effective osmostress protectant and compatible solute but it possesses properties that differ in several aspects from those of ectoine. The enzyme responsible for ectoine hydroxylation (EctD is a member of the non-heme iron(II-containing and 2-oxoglutarate-dependent dioxygenases (EC 1.14.11. These enzymes couple the decarboxylation of 2-oxoglutarate with the formation of a high-energy ferryl-oxo intermediate to catalyze the oxidation of the bound organic substrate. We report here the crystal structure of the ectoine hydroxylase EctD from the moderate halophile Virgibacillus salexigens in complex with Fe(3+ at a resolution of 1.85 A. Like other non-heme iron(II and 2-oxoglutarate dependent dioxygenases, the core of the EctD structure consists of a double-stranded beta-helix forming the main portion of the active-site of the enzyme. The positioning of the iron ligand in the active-site of EctD is mediated by an evolutionarily conserved 2-His-1-carboxylate iron-binding motif. The side chains of the three residues forming this iron-binding site protrude into a deep cavity in the EctD structure that also harbours the 2-oxoglutarate co-substrate-binding site. Database searches revealed a widespread occurrence of EctD-type proteins in members of the Bacteria but only in a single representative of the Archaea, the marine crenarchaeon Nitrosopumilus maritimus. The EctD crystal structure reported here can serve as a template to guide further biochemical and structural studies of this biotechnologically interesting enzyme family.

  14. Is the nuclear refractive index lower than cytoplasm? Validation of phase measurements and implications for light scattering technologies.

    Science.gov (United States)

    Steelman, Zachary A; Eldridge, Will J; Weintraub, Jacob B; Wax, Adam

    2017-12-01

    The refractive index (RI) of biological materials is a fundamental parameter for the optical characterization of living systems. Numerous light scattering technologies are grounded in a quantitative knowledge of the refractive index at cellular and subcellular scales. Recent work in quantitative phase microscopy (QPM) has called into question the widely held assumption that the index of the cell nucleus is greater than that of the cytoplasm, a result which disagrees with much of the current literature. In this work, we critically examine the measurement of the nuclear and whole-cell refractive index using QPM, validating that nuclear refractive index is lower than that of cytoplasm in four diverse cell lines and their corresponding isolated nuclei. We further examine Mie scattering and phase-wrapping as potential sources of error in these measurements, finding they have minimal impact. Finally, we use simulation to examine the effects of incorrect RI assumptions on nuclear morphology measurements using angle-resolved scattering information. Despite an erroneous assumption of the nuclear refractive index, accurate measurement of nuclear morphology was maintained, suggesting that light scattering modalities remain effective. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Brain-wave measures of workload in advanced cockpits: The transition of technology from laboratory to cockpit simulator, phase 2

    Science.gov (United States)

    Horst, Richard L.; Mahaffey, David L.; Munson, Robert C.

    1989-01-01

    The present Phase 2 small business innovation research study was designed to address issues related to scalp-recorded event-related potential (ERP) indices of mental workload and to transition this technology from the laboratory to cockpit simulator environments for use as a systems engineering tool. The project involved five main tasks: (1) Two laboratory studies confirmed the generality of the ERP indices of workload obtained in the Phase 1 study and revealed two additional ERP components related to workload. (2) A task analysis' of flight scenarios and pilot tasks in the Advanced Concepts Flight Simulator (ACFS) defined cockpit events (i.e., displays, messages, alarms) that would be expected to elicit ERPs related to workload. (3) Software was developed to support ERP data analysis. An existing ARD-proprietary package of ERP data analysis routines was upgraded, new graphics routines were developed to enhance interactive data analysis, and routines were developed to compare alternative single-trial analysis techniques using simulated ERP data. (4) Working in conjunction with NASA Langley research scientists and simulator engineers, preparations were made for an ACFS validation study of ERP measures of workload. (5) A design specification was developed for a general purpose, computerized, workload assessment system that can function in simulators such as the ACFS.

  16. A Magnetocaloric Pump for Lab-On-A-Chip Technology: Phase I Report

    Energy Technology Data Exchange (ETDEWEB)

    Love, LJL

    2004-05-08

    A magnetocaloric pump provides a simple means of pumping fluid using only external thermal and magnetic fields. The principle, which can be traced back to the early work of Rosensweig, is straightforward. Magnetic materials tend to lose their magnetization as the temperature approaches the material's Curie point. Exposing a column of magnetic fluid to a uniform magnetic field coincident with a temperature gradient produces a pressure gradient in the magnetic fluid. As the fluid heats up, it loses its attraction to the magnetic field and is displaced by cooler fluid. The impact of such a phenomenon is obvious: fluid propulsion with no moving mechanical parts. Until recently, limitations in the magnetic and thermal properties of conventional materials severely limited practical operating pressure gradients. However, recent advancements in the design of metal substituted magnetite enable fine control over both the magnetic and thermal properties of magnetic nanoparticles, a key element in colloidal based magnetic fluids (ferrofluids). This manuscript begins with a basic description of the process and previous limitations due to material properties. This is followed by a review of existing methods of synthesizing magnetic nanoparticles as well as an introduction to a new approach based on thermophilic metal-reducing bacteria. We compare two compounds and show, experimentally, significant variation in specific magnetic and thermal properties. We develop the constitutive thermal, magnetic, and fluid dynamic equations associated with magnetocaloric pump and validate our finite element model with a series of experiments. Preliminary results show a good match between the model and experiment as well as approximately an order of magnitude increase in the fluid flow rate over conventional magnetite based ferrofluids operating below 80 C. Finally, as a practical demonstration, we describe a novel application of this technology: pumping fluids at the &apos

  17. A Magnetocaloric Pump for Lab-On-Chip Technology: Phase I Report

    Energy Technology Data Exchange (ETDEWEB)

    Love, L.J.

    2004-04-05

    A magnetocaloric pump provides a simple means of pumping fluid using only external thermal and magnetic fields. The principle, which can be traced back to the early work of Rosensweig, is straightforward. Magnetic materials tend to lose their magnetization as the temperature approaches the material's Curie point. Exposing a column of magnetic fluid to a uniform magnetic field coincident with a temperature gradient produces a pressure gradient in the magnetic fluid. As the fluid heats up, it loses its attraction to the magnetic field and is displaced by cooler fluid. The impact of such a phenomenon is obvious: fluid propulsion with no moving mechanical parts. Until recently, limitations in the magnetic and thermal properties of conventional materials severely limited practical operating pressure gradients. However, recent advancements in the design of metal substituted magnetite enable fine control over both the magnetic and thermal properties of magnetic nanoparticles, a key element in colloidal based magnetic fluids (ferrofluids). This manuscript begins with a basic description of the process and previous limitations due to material properties. This is followed by a review of existing methods of synthesizing magnetic nanoparticles as well as an introduction to a new approach based on thermophilic metal-reducing bacteria. We compare two compounds and show, experimentally, significant variation in specific magnetic and thermal properties. We develop the constitutive thermal, magnetic, and fluid dynamic equations associated with magnetocaloric pump and validate our finite element model with a series of experiments. Preliminary results show a good match between the model and experiment as well as approximately an order of magnitude increase in the fluid flow rate over conventional magnetite based ferrofluids operating below 80 C. Finally, as a practical demonstration, we describe a novel application of this technology: pumping fluids at the &apos

  18. Technology.

    Science.gov (United States)

    Online-Offline, 1998

    1998-01-01

    Focuses on technology, on advances in such areas as aeronautics, electronics, physics, the space sciences, as well as computers and the attendant progress in medicine, robotics, and artificial intelligence. Describes educational resources for elementary and middle school students, including Web sites, CD-ROMs and software, videotapes, books,…

  19. EVALUATION OF THOR MINERALIZED WASTE FORMS FOR THE DOE ADVANCED REMEDIATION TECHNOLOGIES PHASE 2 PROJECT

    Energy Technology Data Exchange (ETDEWEB)

    Crawford, C.; Jantzen, C.

    2012-02-02

    , sulfates/sulfides, chlorides, fluorides, volatile radionuclides or other aqueous components. The FBSR technology can process these wastes into a crystalline ceramic (mineral) waste form. The mineral waste form that is produced by co-processing waste with kaolin clay in an FBSR process has been shown to be as durable as LAW glass. Monolithing of the granular FBSR product, which is one of the objectives of this current study, is being investigated to prevent dispersion during transport or burial/storage but is not necessary for performance. FBSR testing of a Hanford LAW simulant and a WTP-SW simulant at the pilot scale was performed by THOR Treatment Technologies, LLC at Hazen Research Inc. in April/May 2008. The Hanford LAW simulant was the Rassat 68 tank blend and the target concentrations for the LAW was increased by a factor of 10 for Sb, As, Ag, Cd, and Tl; 100 for Ba and Re (Tc surrogate); 1,000 for I; and 254,902 for Cs based on discussions with the DOE field office and the environmental regulators and an evaluation of the Hanford Tank Waste Envelopes A, B, and C. It was determined through the evaluation of the actual tank waste metals concentrations that some metal levels were not sufficient to achieve reliable detection in the off-gas sampling. Therefore, the identified metals concentrations were increased in the Rassat simulant processed by TTT at HRI to ensure detection and enable calculation of system removal efficiencies, product retention efficiencies, and mass balance closure without regard to potential results of those determinations or impacts on product durability response such as Toxicity Characteristic Leach Procedure (TCLP). A WTP-SW simulant based on melter off-gas analyses from Vitreous State Laboratory (VSL) was also tested at HRI in the 15-inch diameter Engineering Scale Test Demonstration (ESTD) dual reformer at HRI in 2008. The target concentrations for the Resource Conservation and Recovery Act (RCRA) metals were increased by 16X for Se, 29X for

  20. Development of Hydrologic Characterization Technology of Fault Zones -- Phase I, 2nd Report

    Energy Technology Data Exchange (ETDEWEB)

    Karasaki, Kenzi; Onishi, Tiemi; Black, Bill; Biraud, Sebastien

    2009-03-31

    This is the year-end report of the 2nd year of the NUMO-LBNL collaborative project: Development of Hydrologic Characterization Technology of Fault Zones under NUMO-DOE/LBNL collaboration agreement, the task description of which can be found in the Appendix 3. Literature survey of published information on the relationship between geologic and hydrologic characteristics of faults was conducted. The survey concluded that it may be possible to classify faults by indicators based on various geometric and geologic attributes that may indirectly relate to the hydrologic property of faults. Analysis of existing information on the Wildcat Fault and its surrounding geology was performed. The Wildcat Fault is thought to be a strike-slip fault with a thrust component that runs along the eastern boundary of the Lawrence Berkeley National Laboratory. It is believed to be part of the Hayward Fault system but is considered inactive. Three trenches were excavated at carefully selected locations mainly based on the information from the past investigative work inside the LBNL property. At least one fault was encountered in all three trenches. Detailed trench mapping was conducted by CRIEPI (Central Research Institute for Electric Power Industries) and LBNL scientists. Some intriguing and puzzling discoveries were made that may contradict with the published work in the past. Predictions are made regarding the hydrologic property of the Wildcat Fault based on the analysis of fault structure. Preliminary conceptual models of the Wildcat Fault were proposed. The Wildcat Fault appears to have multiple splays and some low angled faults may be part of the flower structure. In parallel, surface geophysical investigations were conducted using electrical resistivity survey and seismic reflection profiling along three lines on the north and south of the LBNL site. Because of the steep terrain, it was difficult to find optimum locations for survey lines as it is desirable for them to be as

  1. Development of Hydrologic Characterization Technology of Fault Zones: Phase I, 2nd Report

    International Nuclear Information System (INIS)

    Karasaki, Kenzi; Onishi, Tiemi; Black, Bill; Biraud, Sebastien

    2009-01-01

    This is the year-end report of the 2nd year of the NUMO-LBNL collaborative project: Development of Hydrologic Characterization Technology of Fault Zones under NUMO-DOE/LBNL collaboration agreement, the task description of which can be found in the Appendix 3. Literature survey of published information on the relationship between geologic and hydrologic characteristics of faults was conducted. The survey concluded that it may be possible to classify faults by indicators based on various geometric and geologic attributes that may indirectly relate to the hydrologic property of faults. Analysis of existing information on the Wildcat Fault and its surrounding geology was performed. The Wildcat Fault is thought to be a strike-slip fault with a thrust component that runs along the eastern boundary of the Lawrence Berkeley National Laboratory. It is believed to be part of the Hayward Fault system but is considered inactive. Three trenches were excavated at carefully selected locations mainly based on the information from the past investigative work inside the LBNL property. At least one fault was encountered in all three trenches. Detailed trench mapping was conducted by CRIEPI (Central Research Institute for Electric Power Industries) and LBNL scientists. Some intriguing and puzzling discoveries were made that may contradict with the published work in the past. Predictions are made regarding the hydrologic property of the Wildcat Fault based on the analysis of fault structure. Preliminary conceptual models of the Wildcat Fault were proposed. The Wildcat Fault appears to have multiple splays and some low angled faults may be part of the flower structure. In parallel, surface geophysical investigations were conducted using electrical resistivity survey and seismic reflection profiling along three lines on the north and south of the LBNL site. Because of the steep terrain, it was difficult to find optimum locations for survey lines as it is desirable for them to be as

  2. A fluid biopsy as investigating technology for the fluid phase of solid tumors

    Science.gov (United States)

    Kuhn, Peter; Bethel, Kelly

    2012-02-01

    Reliable measurement of internal bodily substances and structures is one of the cornerstones of modern medicine. Progress in cancer medicine, like that in many medical fields, must encompass and take advantage of progress in the physical sciences. Historically, the development and refinement of physical sciences-based detection of biological entities precedes periods of great advancements in therapies. To treat broken limbs and arthritis, we are indebted to Conrad Roentgen's discovery of x-rays by which we can evaluate the bones; to apply gamma knife therapy for cancer, we are indebted to Marie Curie's discoveries about radioactivity by which we can eradicate tumors; to manage the complications of diabetes, we are indebted to Tom Clemens, Ames Pharmaceuticals and Dick Bernstein's refinement of direct blood glucose measurement technology by which we can count, hour-to-hour, the waxing and waning of blood sugar levels; to understand anything at all on the cellular level, we are indebted to Antonie van Leeuwenhoek's microscope, by which we can see our cells. The application of physical sciences perspectives to biological and medical problems has a long and productive history. As of late, however, the increasing compartmentalization of science and exponential increases of knowledge in both arenas has resulted in a rift between the two. The NCI has initiated a research network establishing multiple centers of investigation, the Physical Sciences in Oncology Centers (http://physics.cancer.gov), which seek to mend the rift. Each headed by a pair of investigators, one in the physical sciences and one in the biological sciences, the centers seek to bring the advances and breakthroughs of the physical sciences world to bear on the question of cancer. This issue of physical biology contains a series of articles exploring the utility and applicability of a new method for measuring cancer as it spreads, developed at the Scripps Physical Oncology Center. Although some progress

  3. Results from the electro-optic sensors domain of the materials and components for missiles innovation and technology partnership (phase 1)

    Science.gov (United States)

    Bray, Mark E.; Shears, Robert A.

    2013-10-01

    The Materials and Components for Missiles Innovation and Technology Partnership (ITP) is a research programme supporting research for guided weapons at Technology Readiness Levels 1 to 4. The Anglo-French initiative is supported by the DGA and the MoD, with matched funding from industry. A major objective is to foster projects which partner UK and French universities, SMEs and larger companies. The first projects started in January 2008 and the first phase completed in spring 2013. Providing funding is secured, the next phase of the programme is due to start later in 2013. Selex ES leads Domain 3 of the MCM-ITP which develops Electro-Optic sensor technology. In collaboration with DGA, MoD and MBDA, the prime contractor, we identified 4 key objectives for the first ITP phase and focussed resources on achieving these. The objectives were to enable better imagery, address operationally stressing scenarios, provide low overall through life cost and improve active and semi-active sensors Nine normal projects and one ITP innovation fund project have been supported within the domain. The technology providers have included 3 SMEs and 8 research centres from both the United Kingdom and France. Highlights of the projects are included. An outline of the priorities for the domain for the new phase ise provided and we encourage organisations with suitable technology to contact us to get involved.

  4. The comparing results of carcinoma between three-phase and delayed whole body bone scan

    International Nuclear Information System (INIS)

    Si Hongwei; Li Xianfeng

    2004-01-01

    Purpose: Three phase bone scan is an imaging technology in nuclear medicine, which composed of blood flow phase, blood pool phase and delayed phase and the last one is often performed in routine works in department of nuclear medicine. The purpose of this study is to evaluate the merit of three-phase bone scan.Methods: In this study, we chose 54 patients who were having an regional pain which caused by benign or malignant carcinoma that diagnosed by CT, X-ray, ECT, MRI or other examinations. The imaging were acquired simultaneously from both anterior and posterior views, after a bolus injection of 1110 MBq technetium-99m-labelled methylene diphosphonate (MDP), blood phase contains 20 frame sand 3 seconds per frame, blood pool phase contains 5 frames and 1 minute per frame, delayed phase was performed 2.5 hour later. According to the results of three-phase bone scan, the patients were divided into 2 groups: normal and abnormal groups. The abnormal group includes early phase positive,delay positive and all three phase positive sets. The comparing among the 3 sets were analyzed by chi-square test and other statistic means.Results: There were 54 patients who had suffered lung cancer, breast cancer and other cancer,involved in this study, 34 males and 20 females, ranged age 17 to 88 years, were normal in 15 cases,positive in 22 cases, the results in delayed phase were positive in 9 cases, blood flow and blood pool phase showed blood flow changes in 4 cases and soft tissue tumors were seen in 4 cases. Three phase bone scan was more sensitive than delayed whole body bone scan in detecting the abnormal sites (p 0.05) The sensitivity of detecting tumors in blood flow and blood pool phase,delayed phase were respectively lower than in three phase bone scan (p<0.001).Conclusion: It is more sensitivity of detecting tumor lesions in three phase bone scan than in delayed phase whole body bone scan and the changes of blood flow and soft tissue can be seen in three phase bone scan

  5. Electric capacitance tomography and two-phase flow for the nuclear reactor safety analysis

    International Nuclear Information System (INIS)

    Lee, Jae Young

    2008-01-01

    Recently electric capacitance tomography has been developed to be used in the analysis of two-phase flow. Although its electric field is not focused as the hard ray tomography such as the X-ray or gamma ray, its convenience of easy access to the system and easy maintenance due to no requirement of radiation shielding benefits us in its application in the two-phase flow study, one of important area in the nuclear safety analysis. In the present paper, the practical technologies in the electric capacitance tomography are represented in both parts of hardware and software. In the software part, both forward problem and inverse problem are discussed and the method of regularization. In the hardware part, the brief discussion of the electronics circuits is made which provides femto farad resolution with a reasonable speed (150 frame/sec for 16 electrodes). Some representative ideal cases are studied to demonstrate its potential capability for the two-phase flow analysis. Also, some variations of the tomography such as axial tomography, and three dimensional tomography are discussed. It was found that the present ECT is expected to become a useful tool to understand the complicated three dimensional two-phase flow which may be an important feature to be equipped by the safety analysis codes. (author)

  6. Technology

    Directory of Open Access Journals (Sweden)

    Xu Jing

    2016-01-01

    Full Text Available The traditional answer card reading method using OMR (Optical Mark Reader, most commonly, OMR special card special use, less versatile, high cost, aiming at the existing problems proposed a method based on pattern recognition of the answer card identification method. Using the method based on Line Segment Detector to detect the tilt of the image, the existence of tilt image rotation correction, and eventually achieve positioning and detection of answers to the answer sheet .Pattern recognition technology for automatic reading, high accuracy, detect faster

  7. A K-Band Low-Power Phase Shifter Based on Injection Locked Oscillator in 0.13 μm CMOS Technology

    Science.gov (United States)

    Qiu, Qi-Lin; Yu, Xiao-Peng; Sui, Wen-Quan

    2017-11-01

    In this paper, the design challenges of the injection-locked oscillator (ILO)-based phase shifter are reviewed and analyzed. The key design considerations such as the operating frequency, locking range, and linearity of the phase shifters are analysed in detail. It is possible to optimize the phase shifter in certain parameters such as ultra-low power while meeting the requirements of a certain system. As a design example, a K-band phase shifter is implemented using a commercial 0.13 μm CMOS technology, where a conventional LC tank based topology is implemented but optimised with a good balance among power consumption, working range, sensitivity, and silicon area, etc. Measurement results show that the proposed phase shift is able to work at 22-23.4 GHz with a range of 180∘ while consuming 3.14 mW from a 1.2 V supply voltage.

  8. Tercer molar ectópico a nivel de región infraorbitaria-seno maxilar Ectopic third molar of the maxillary sinus-infraorbital region

    Directory of Open Access Journals (Sweden)

    C. Moreno García

    2007-06-01

    Full Text Available Introducción. Los cordales ectópicos son aquellos incluidos en posiciones inusuales o desplazados a distancia de su normal localización anatómica. La erupción ectópica de un diente dentro de la cavidad oral es común pero en otros lugares es raro. La erupción ectópica puede ir asociada con alteraciones en el desarrollo, procesos patológicos o yatrogenia. Caso Clínico. Mujer de 56 años de edad con tercer molar superior derecho ectópico a nivel de región infraorbitaria-seno maxilar. Presentaba dolor e inflamación hemifacial derecha de larga evolución y resistente a tratamiento médico. Se realizó exéresis quirúrgica de dicho cordal mediante abordaje de Caldwell-Luc. Discusión. En muchos casos la etiología de un cordal ectópico no puede ser identificada. La mayor parte de las veces son asintomáticos y diagnosticados mediante estudios radiológicos. Conclusión. La indicación de la exodoncia en el caso de un diente ectópico en general viene determinada por la presencia de sintomatología o en prevención de futuras complicaciones.Introduction. Ectopic third molar teeth are those that are impacted in unusual positions, or that have been displaced and are at a distance from their normal anatomic location. Ectopic eruption of a tooth within the oral cavity is common, but rare in other sites. Ectopic eruption can be associated with developmental disturbances, pathologic processes or iatrogenic activity. Case Report. Female, fifty-six years old, with an upper right ectopic third molar located in the maxillary sinus-infraorbital region. She presented with pain and inflammation of the right side of her face that she had been experiencing for along time and which had been resistant to treatment. Surgical excision was carried out of the third molar tooth using the Caldwell-Luc approach. Discussion. In many cases the etiology of ectopic third molars cannot be identified. Generally they are asymptomatic and diagnosed by radiology

  9. Science Goals and Overview of the Radiation Belt Storm Probes (RBSP) Energetic Particle, Composition, and Thermal Plasma (ECT) Suite on NASA's Van Allen Probes Mission

    Science.gov (United States)

    Spence, H. E.; Reeves, G. D.; Baker, D. N.; Blake, J. B.; Bolton, M.; Bourdarie, S.; Chan, A. A.; Claudepierre, S. G.; Clemmons, J. H.; Cravens, J. P.; Elkington, S. R.; Fennell, J. F.; Friedel, R. H. W.; Funsten, H. O.; Goldstein, J.; Green, J. C.; Guthrie, A.; Henderson, M. G.; Horne, R. B.; Hudson, M. K.; Jahn, J.-M.; Jordanova, V. K.; Kanekal, S. G.; Klatt, B. W.; Larsen, B. A.; Li, X.; MacDonald, E. A.; Mann, I. R.; Niehof, J.; O'Brien, T. P.; Onsager, T. G.; Salvaggio, D.; Skoug, R. M.; Smith, S. S.; Suther, L. L.; Thomsen, M. F.; Thorne, R. M.

    2013-11-01

    The Radiation Belt Storm Probes (RBSP)-Energetic Particle, Composition, and Thermal Plasma (ECT) suite contains an innovative complement of particle instruments to ensure the highest quality measurements ever made in the inner magnetosphere and radiation belts. The coordinated RBSP-ECT particle measurements, analyzed in combination with fields and waves observations and state-of-the-art theory and modeling, are necessary for understanding the acceleration, global distribution, and variability of radiation belt electrons and ions, key science objectives of NASA's Living With a Star program and the Van Allen Probes mission. The RBSP-ECT suite consists of three highly-coordinated instruments: the Magnetic Electron Ion Spectrometer (MagEIS), the Helium Oxygen Proton Electron (HOPE) sensor, and the Relativistic Electron Proton Telescope (REPT). Collectively they cover, continuously, the full electron and ion spectra from one eV to 10's of MeV with sufficient energy resolution, pitch angle coverage and resolution, and with composition measurements in the critical energy range up to 50 keV and also from a few to 50 MeV/nucleon. All three instruments are based on measurement techniques proven in the radiation belts. The instruments use those proven techniques along with innovative new designs, optimized for operation in the most extreme conditions in order to provide unambiguous separation of ions and electrons and clean energy responses even in the presence of extreme penetrating background environments. The design, fabrication and operation of ECT spaceflight instrumentation in the harsh radiation belt environment ensure that particle measurements have the fidelity needed for closure in answering key mission science questions. ECT instrument details are provided in companion papers in this same issue. In this paper, we describe the science objectives of the RBSP-ECT instrument suite on the Van Allen Probe spacecraft within the context of the overall mission objectives

  10. Engineering grouts - materials and applications with specific examples from Ra asthan Atomic Power Pro ect

    International Nuclear Information System (INIS)

    Singha Roy, P.K.; Sachchidanand; Sukhthankar, K.D.

    1978-01-01

    Grouting, though not very significant costwise, is an important aspect6 of construction in most of the major projects. According to modern construction technology, grouts have very stringent and diverse uses. The materials and practices generally found in India for grouting, mainly for structural grouts upto the middle of this decade are outlined along with details of specific grouts used in the construction of the twin reactor (440 MWe) of Rajasthan Atomic Power Station, one reactor of which is already operational. Some guidance and tables for selection of grout for a specific use have also been given. (auth.)

  11. Distance learning ects and flipped classroom in the anatomy learning: comparative study of the use of augmented reality, video and notes.

    Science.gov (United States)

    Ferrer-Torregrosa, Javier; Jiménez-Rodríguez, Miguel Ángel; Torralba-Estelles, Javier; Garzón-Farinós, Fernanda; Pérez-Bermejo, Marcelo; Fernández-Ehrling, Nadia

    2016-09-01

    The establishment of the ECTS (European Credit Transfer System) is one of the pillars of the European Space of Higher Education. This way of accounting for the time spent in training has two essential parts, classroom teaching (work with the professor) and distance learning (work without the professor, whether in an individual or collective way). Much has been published on the distance learning part, but less on the classroom teaching section. In this work, the authors investigate didactic strategies and associated aids for distance learning work in a concept based on flipped classroom where transmitting information is carried out with aids that the professor prepares, so that the student works in an independent way before the classes, thus being able to dedicate the classroom teaching time to more complex learning and being able to count on the professor's help. Three teaching aids applied to the study of anatomy have been compared: Notes with images, videos, and augmented reality. Four dimensions have been compared: the time spent, the acquired learnings, the metacognitive perception, and the prospects of the use of augmented reality for study. The results show the effectiveness, in all aspects, of augmented reality when compared with the rest of aids. The questionnaire assessed the acquired knowledge through a course exam, where 5.60 points were obtained for the notes group, 6.54 for the video group, and 7.19 for the augmented reality group. That is 0.94 more points for the video group compared with the notes and 1.59 more points for the augmented reality group compared with the notes group. This research demonstrates that, although technology has not been sufficiently developed for education, it is expected that it can be improved in both the autonomous work of the student and the academic training of health science students and that we can teach how to learn. Moreover, one can see how the grades of the students who studied with augmented reality are more

  12. Possible Association between Serum Matrix Metalloproteinase-9 (MMP-9) Levels and Relapse in Depressed Patients following Electroconvulsive Therapy (ECT).

    Science.gov (United States)

    Shibasaki, Chiyo; Itagaki, Kei; Abe, Hiromi; Kajitani, Naoto; Okada-Tsuchioka, Mami; Takebayashi, Minoru

    2018-03-01

    Matrix metalloproteinases are involved in neuroinflammatory processes, which could underlie depression. Serum levels of MMP-9 and MMP-2 in depressed patients are significantly altered following electroconvulsive therapy, but an association between altered matrix metalloproteinases after successful ECT and possible relapse has yet to be investigated. Serum was obtained twice, before and immediately after a course of electroconvulsive therapy, from 38 depressed patients. Serum was also collected, once, from two groups of age- and gender-matched healthy controls, 40 volunteers in each group. Possible associations between levels of matrix metalloproteinases and relapse during a 1-year follow-up period were analyzed. Excluding patients who did not respond to electroconvulsive therapy and patients lost to follow-up, data from 28 patients were evaluated. Eighteen of the patients (64.3%) relapsed within 1 year. In the group that did not relapse, serum levels of MMP-9 were significantly decreased after a course of electroconvulsive therapy, but not in the group that relapsed. No association between MMP-2 and relapse was observed. The degree of change in serum MMP-9 change could be associated with relapse following electroconvulsive therapy in depressed patients. © The Author 2017. Published by Oxford University Press on behalf of CINP.

  13. Intelligent technologies in process of highly-precise products manufacturing

    Science.gov (United States)

    Vakhidova, K. L.; Khakimov, Z. L.; Isaeva, M. R.; Shukhin, V. V.; Labazanov, M. A.; Ignatiev, S. A.

    2017-10-01

    One of the main control methods of the surface layer of bearing parts is the eddy current testing method. Surface layer defects of bearing parts, like burns, cracks and some others, are reflected in the results of the rolling surfaces scan. The previously developed method for detecting defects from the image of the raceway was quite effective, but the processing algorithm is complicated and lasts for about 12 ... 16 s. The real non-stationary signals from an eddy current transducer (ECT) consist of short-time high-frequency and long-time low-frequency components, therefore a transformation is used for their analysis, which provides different windows for different frequencies. The wavelet transform meets these conditions. Based on aforesaid, a methodology for automatically detecting and recognizing local defects in bearing parts surface layer has been developed on the basis of wavelet analysis using integral estimates. Some of the defects are recognized by the amplitude component, otherwise an automatic transition to recognition by the phase component of information signals (IS) is carried out. The use of intelligent technologies in the manufacture of bearing parts will, firstly, significantly improve the quality of bearings, and secondly, significantly improve production efficiency by reducing (eliminating) rejections in the manufacture of products, increasing the period of normal operation of the technological equipment (inter-adjustment period), the implementation of the system of Flexible facilities maintenance, as well as reducing production costs.

  14. The Nuclear Energy Advanced Modeling and Simulation Enabling Computational Technologies FY09 Report

    Energy Technology Data Exchange (ETDEWEB)

    Diachin, L F; Garaizar, F X; Henson, V E; Pope, G

    2009-10-12

    In this document we report on the status of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) Enabling Computational Technologies (ECT) effort. In particular, we provide the context for ECT In the broader NEAMS program and describe the three pillars of the ECT effort, namely, (1) tools and libraries, (2) software quality assurance, and (3) computational facility (computers, storage, etc) needs. We report on our FY09 deliverables to determine the needs of the integrated performance and safety codes (IPSCs) in these three areas and lay out the general plan for software quality assurance to meet the requirements of DOE and the DOE Advanced Fuel Cycle Initiative (AFCI). We conclude with a brief description of our interactions with the Idaho National Laboratory computer center to determine what is needed to expand their role as a NEAMS user facility.

  15. Exploring proximity effects and large depth of field in helium ion beam lithography: large-area dense patterns and tilted surface exposure.

    Science.gov (United States)

    Flatabø, Ranveig; Agarwal, Akshay; Hobbs, Richard; Greve, Martin Møeller; Holst, Bodil; Berggren, Karl K

    2018-04-13

    Helium ion beam lithography (HIL) is an emerging nanofabrication technique. It benefits from a reduced interaction volume compared to that of an electron beam of similar energy, and hence reduced long-range scattering (proximity effect), higher resist sensitivity and potentially higher resolution. Furthermore, the small angular spread of the helium ion beam gives rise to a large depth of field. This should enable patterning on tilted and curved surfaces without the need of any additional adjustments, such as laser-auto focus. So far, most work on helium ion beam lithography has been focused on exploiting the reduced proximity effect to reach single-digit nanometer resolution, and has thus been concentrated on single-pixel exposures over small areas. Here we explore two new areas of application. Firstly, we investigate the proximity effect in large area exposures and demonstrate HIL's capabilities in fabricating precise high-density gratings on large planar surfaces (100 µm × 100 µm, with pitch down to 35 nm). Secondly, we exploit the large depth of field by making the first HIL patterns on tilted surfaces (sample stage tilted 45◦). We demonstrate a depth of field greater than 100 µm for a resolution of about 20 nm. © 2018 IOP Publishing Ltd.

  16. Innovative fossil fuel fired vitrification technology for soil remediation. Volume 1, Phase 1: Annual report, September 28, 1992--August 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-08-01

    Vortex has successfully completed Phase 1 of the ``Innovative Fossil Fuel Fired Vitrification Technology for Soil Remediation`` program with the Department of Energy (DOE) Morgantown Energy Technology Center (METC). The Combustion and Melting System (CMS) has processed 7000 pounds of material representative of contaminated soil that is found at DOE sites. The soil was spiked with Resource Conversation and Recovery Act (RCRA) metals surrogates, an organic contaminant, and a surrogate radionuclide. The samples taken during the tests confirmed that virtually all of the radionuclide was retained in the glass and that it did not leach to the environment. The organic contaminant, anthracene, was destroyed during the test with a Destruction and Removal Efficiency (DRE) of at least 99.99%. RCRA metal surrogates, that were in the vitrified product, were retained and will not leach to the environment--as confirmed by the TCLP testing. Semi-volatile RCRA metal surrogates were captured by the Air Pollution Control (APC) system, and data on the amount of metal oxide particulate and the chemical composition of the particulate were established for use in the Phase 2 APC system design. This topical report will present a summary of the activities conducted during Phase 1 of the ``Innovative Fossil Fuel Fired Vitrification Technology for Soil Remediation`` program. The report includes the detail technical data generated during the experimental program and the design and cost data for the preliminary Phase 2 plant.

  17. Erupción ectópica: presentación de un caso con 90 por 100 de rotación en un segundo molar primario superior

    OpenAIRE

    Boj Quesada, Juan Ramón; Vilar Martínez, Ma. Teresa

    1990-01-01

    La erupción ectópica del primer molar permanente es una plaga en odontología infantil. Este artículo revisa las características de la erupción ectópica y en su última parte reporta un caso con una rotación de 90 por lOO del segundo molar primario superior.

  18. Investigation of Virtual Digital Human and Robotic Device Technology Merger Complimented by Haptics and Autostereoscopic Displays, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed innovations conform precisely to the technology needs described in Subtopic T5.02, Robotics and Virtual Digital Human Technologies. ?Two potential areas...

  19. TH-EF-207A-06: High-Resolution Optical-CT/ECT Imaging of Unstained Mice Femur, Brain, Spleen, and Tumor

    International Nuclear Information System (INIS)

    Yoon, S; Dewhirst, M; Oldham, M; Boss, M; Birer, S

    2016-01-01

    Purpose: Optical transmission and emission computed tomography (optical-CT/ECT) provides high-resolution 3D attenuation and emission maps in unsectioned large (∼1cm 3 ) ex vivo tissue samples at a resolution of 12.9µm 3 per voxel. Here we apply optical-CT/ECT to investigate high-resolution structure and auto-fluorescence in a range of optically cleared mice organs, including, for the first time, mouse bone (femur), opening the potential for study of bone metastasis and bone-mediated immune response. Methods: Three BALBc mice containing 4T1 flank tumors were sacrificed to obtain spleen, brain, tumor, and femur. Tissues were washed in 4% PFA, fixed in EtOH solution (for 5, 10, 10, and 2 days respectively), and then optically cleared for 3 days in BABBs. The femur was also placed in 0.25M aqueous EDTA for 15–30 days to remove calcium. Optical-CT/ECT attenuation and emission maps at 633nm (the latter using 530nm excitation light) were obtained for all samples. Bi-telecentric optical-CT was compared side-by-side with conventional optical projection tomography (OPT) imaging to evaluate imaging capability of these two rival techniques. Results: Auto-fluorescence mapping of femurs reveals vasculatures and fluorescence heterogeneity. High signals (A.U.=10) are reported in the medullary cavity but not in the cortical bone (A.U.=1). The brain strongly and uniform auto-fluoresces (A.U.=5). Thick, optically dense organs such as the spleen and the tumor (0.12, 0.46OD/mm) are reconstructed at depth without significant loss of resolution, which we attribute to the bi-telecentric optics of optical-CT. The attenuation map of tumor reveals vasculature, attenuation heterogeneity, and possibly necrotic tissue. Conclusion: We demonstrate the feasibility of optical-CT/ECT imaging of un-sectioned mice bones (femurs) and spleen with high resolution. This result, and the characterization of unstained organs, are important steps enabling future studies involving optical-CT/ECT applied

  20. The Influence of Technological Conditions of the Process of Cogging in Flat Dies on the Quality of Two-Phase Titanium Alloys

    Directory of Open Access Journals (Sweden)

    Dyja Н.

    2016-06-01

    Full Text Available To create a rational technology of cogging process and to determinate the optimal values of the angles of tilt and single reduction the stress-strain state (SSS of the blank during cogging in the flat dies was analyzed. By using the finite element method and program MSC.SuperForge quantitative data are obtained and the basic patterns of distribution of SSS, the temperature during the simulation of tilting in flat dies with different angles of tilting and the amount of reduction were established. Sustainable experimental-industrial technology of forging of two-phase titanium alloys was developed and tested.

  1. Thin-Film CIGS Photovoltaic Technology: Annual Technical Report-Phase II, 16 April 1999-15 April 2000

    Energy Technology Data Exchange (ETDEWEB)

    Delahoy, A.E.; Bruns, J.; Ruppert, A.; Akhtar, M.; Chen, L.; Kiss, Z.J.

    2000-08-24

    A summary of Energy Photovoltaics' Phase II work includes the following: (1) EPV has demonstrated that it can sputter a Mo back-contact capable of supporting very high efficiency cell processing. Using EPV Mo, NREL has deposited a 17.1% CIGS cell (no AR coating). EPV believes it can identify the signature of ``good'' Mo. The Mo was produced on EPV's 0.43 m{sup 2} pilot-line equipment; (2) EPV has performed compound synthesis for several classes of materials, namely non-Cu precursor materials, Cu-containing materials, and ternary buffer materials. Using a ternary compound synthesized at EPV (ZIS) as an evaporation source material for the buffer layer, a Cd-free CIGS device has been produced having an efficiency of 11.5% (560 mV, 32.1 mA/cm{sup 2}, FF 64.3%). The ZIS films are photoconductive, and the devices exhibit no dark-light crossover or light soaking effects; (3) EPV initiated the interest of the University of Oregon in capacitance spectroscopy of CIGS devices. An Urbach tail with characteristic energy E0 < 20meV was identified by transient photocapacitance spectroscopy; (4) Small-area CIGS devices were produced in the pilot-line system with an efficiency of 12.0% (581 mV, 30.1 mA/cm{sup 2}, FF 68.7%), and in an R and D-scale system with 13.3% efficiency (569 mV, 34.1 mA/cm{sup 2}, FF 68.1%); (5) An improved linear evaporation source for Cu delivery has been developed and was used for CIGS formation in the pilot-line system. The deposition width is 45 cm. This technological ``tour de force'' allows EPV to build large-area CIGS systems possessing considerable flexibility. In particular, both EPV's FORNAX process and NREL's 3-stage process have been implemented on the pilot line. A CIGS thickness uniformity of 7% over a 40 cm width has been achieved; (6) A 4-head linear source assembly was designed, constructed, and is in use. Flux monitoring is practiced; (7) Large-area CIGS modules were produced with Voc's up to 36

  2. In-Space technology experiments program. A high efficiency thermal interface (using condensation heat transfer) between a 2-phase fluid loop and heatpipe radiator: Experiment definition phase

    Science.gov (United States)

    Pohner, John A.; Dempsey, Brian P.; Herold, Leroy M.

    1990-01-01

    Space Station elements and advanced military spacecraft will require rejection of tens of kilowatts of waste heat. Large space radiators and two-phase heat transport loops will be required. To minimize radiator size and weight, it is critical to minimize the temperature drop between the heat source and sink. Under an Air Force contract, a unique, high-performance heat exchanger is developed for coupling the radiator to the transport loop. Since fluid flow through the heat exchanger is driven by capillary forces which are easily dominated by gravity forces in ground testing, it is necessary to perform microgravity thermal testing to verify the design. This contract consists of an experiment definition phase leading to a preliminary design and cost estimate for a shuttle-based flight experiment of this heat exchanger design. This program will utilize modified hardware from a ground test program for the heat exchanger.

  3. Test Plan: Phase 1 demonstration of 3-phase electric arc melting furnace technology for vitrifying high-sodium content low-level radioactive liquid wastes

    International Nuclear Information System (INIS)

    Eaton, W.C.

    1995-01-01

    This document provides a test plan for the conduct of electric arc vitrification testing by a vendor in support of the Hanford Tank Waste Remediation System (TWRS) Low-Level Waste (LLW) Vitrification Program. The vendor providing this test plan and conducting the work detailed within it [one of seven selected for glass melter testing under Purchase Order MMI-SVV-384216] is the US Bureau of Mines, Department of the Interior, Albany Research Center, Albany, Oregon. This test plan is for Phase I activities described in the above Purchase Order. Test conduct includes feed preparation activities and melting of glass with Hanford LLW Double-Shell Slurry Feed waste simulant in a 3-phase electric arc (carbon electrode) furnace

  4. Ultra-dense Multistage Thin Film Thermoelectric Cooler enabled by Massive Filo-Layer Technology (MFT), Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Future instruments and platforms for NASA's Earth Science Enterprises will require increasingly sophisticated thermal control technology. Temperature control for...

  5. Alternative Green Technology for Power Generation Using Waste-Heat Energy And Advanced Thermoelectric Materials, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA is interested in advancing green technology research for achieving sustainable and environmentally friendly energy sources for both terrestrial and space...

  6. Alternative Green Technology for Power Generation Using Waste-Heat Energy And Advanced Thermoelectric Materials, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA is interested in advancing green technology research for achieving sustainable and environmentally friendly energy sources. Thermo-electric power generation...

  7. Distribution of Polycyclic Aromatic Hydrocarbons between the Particulate and the Gas Phase of Mainstream Cigarette Smoke in Relation to Cigarette Technological Characteristics

    Directory of Open Access Journals (Sweden)

    Kalaitzoglou M

    2014-12-01

    Full Text Available Particulate- and gas-phase polycyclic aromatic hydrocarbons (PAHs were determined in the mainstream smoke (MSS of 59 manufactured cigarette brands (commercially available brands of unknown tobacco and blend type with variable ‘tar’ yields and physical/technological characteristics. Depending on the existence/absence of filter, the ‘tar’ yield indicated on the packet, and the cigarette length and diameter, the examined cigarette brands were classified into 15 groups: non filter (NF, high (H, medium (M, light (L, super light (SL, ultra light (UL, one-tar yields (O, 100 mm long cigarettes (H-100, L-100, SL-100, UL-100, O-100, and slim cigarettes (SL-SLIM, UL-SLIM, O-SLIM. Cigarettes were smoked in a reference smoking machine equipped with glass fibre filters for collection of PAHs bound to total particulate matter (TPM, and polyurethane foam plugs (PUF for collection of gas-phase PAHs. The relationships of gas- and particulate-phase concentrations of PAHs (ng/cig with the contents of typical MSS components, such as TPM, ‘tar’, nicotine and carbon monoxide were investigated. In addition, the phase partitioning of PAHs in MSS was evaluated in relation to the technological characteristics of cigarettes.

  8. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT-A AND A ENVIRONMENTAL SEALS, INC., SEAL ASSIST SYSTEM (SAS) PHASE II REPORT

    Science.gov (United States)

    The Environmental Technology Verification report discusses the technology and performance of Seal Assist System (SAS) for natural gas reciprocating compressor rod packing manufactured by A&A Environmental Seals, Inc. The SAS uses a secondary containment gland to collect natural g...

  9. Embarazo ectópico tubárico roto posterior a esterilización quirúrgica (Ruptured tubal ectopic pregnancy after surgical sterilization

    Directory of Open Access Journals (Sweden)

    Ismael Suárez Torres

    2014-07-01

    Full Text Available Resumen (español La esterilización tubárica quirúrgica es un método comúnmente utilizado de anticoncepción. Aunque el embarazo después de la esterilización es poco común, este puede ocurrir y cuando esto ocurre existe un riesgo substancial de convertirse en un embarazo ectópico. Se presenta el caso un embarazo ectópico posterior a la esterilización quirúrgica tubárica en una paciente de 38 años, V gesta, III paras, I cesárea, con antecedentes de uso de dispositivos intrauterinos por varios años antes de la salpingectomía realizada 12 meses antes durante la cesárea, quien consultó por presentar marcada palidez cutáneo-mucosa, retraso menstrual y dolor abdominal de fuerte intensidad. Durante la laparotomía ambas trompas estaban separadas en dos porciones. La porción terminal de la trompa derecha se observó la presencia de una tumoración compatible con un embarazo ectópico tubárico roto. Abstract (english Surgical tubal sterilization is a commonly used method of contraception. Although pregnancy after sterilization is uncommon, when it occurs, there is a substantial risk that it will be an ectopic pregnancy. We report a case of ruptured tubal ectopic pregnancy following surgical tubal sterilization in a 38 years-old patient, gravida V, para III, cesarean I, with history of intrauterine device use for many years before salpingectomy performed 12 months before during cesarean section, who consulted for presenting menstrual delay and severe abdominal pain. During laparotomy both tubes were separated in two portions. There was observed in terminal portion of right tube the presence of a tumor compatible with ruptured tubal ectopic pregnancy.

  10. The nuclear guanine nucleotide exchange factors Ect2 and Net1 regulate RhoB-mediated cell death after DNA damage.

    Directory of Open Access Journals (Sweden)

    Melissa C Srougi

    2011-02-01

    Full Text Available Commonly used antitumor treatments, including radiation and chemotherapy, function by damaging the DNA of rapidly proliferating cells. However, resistance to these agents is a predominant clinical problem. A member of the Rho family of small GTPases, RhoB has been shown to be integral in mediating cell death after ionizing radiation (IR or other DNA damaging agents in Ras-transformed cell lines. In addition, RhoB protein expression increases after genotoxic stress, and loss of RhoB expression causes radio- and chemotherapeutic resistance. However, the signaling pathways that govern RhoB-induced cell death after DNA damage remain enigmatic. Here, we show that RhoB activity increases in human breast and cervical cancer cell lines after treatment with DNA damaging agents. Furthermore, RhoB activity is necessary for DNA damage-induced cell death, as the stable loss of RhoB protein expression using shRNA partially protects cells and prevents the phosphorylation of c-Jun N-terminal kinases (JNKs and the induction of the pro-apoptotic protein Bim after IR. The increase in RhoB activity after genotoxic stress is associated with increased activity of the nuclear guanine nucleotide exchange factors (GEFs, Ect2 and Net1, but not the cytoplasmic GEFs p115 RhoGEF or Vav2. Importantly, loss of Ect2 and Net1 via siRNA-mediated protein knock-down inhibited IR-induced increases in RhoB activity, reduced apoptotic signaling events, and protected cells from IR-induced cell death. Collectively, these data suggest a mechanism involving the nuclear GEFs Ect2 and Net1 for activating RhoB after genotoxic stress, thereby facilitating cell death after treatment with DNA damaging agents.

  11. Orchestrated regulation of Nogo receptors, LOTUS, AMPA receptors and BDNF in an ECT model suggests opening and closure of a window of synaptic plasticity.

    Directory of Open Access Journals (Sweden)

    Max Nordgren

    Full Text Available Electroconvulsive therapy (ECT is an efficient and relatively fast acting treatment for depression. However, one severe side effect of the treatment is retrograde amnesia, which in certain cases can be long-term. The mechanisms behind the antidepressant effect and the amnesia are not well understood. We hypothesized that ECT causes transient downregulation of key molecules needed to stabilize synaptic structure and to prevent Ca2+ influx, and a simultaneous increase in neurotrophic factors, thus providing a short time window of increased structural synaptic plasticity. Here we followed regulation of NgR1, NgR3, LOTUS, BDNF, and AMPA subunits GluR1 and GluR2 flip and flop mRNA levels in hippocampus at 2, 4, 12, 24, and 72 hours after a single episode of induced electroconvulsive seizures (ECS in rats. NgR1 and LOTUS mRNA levels were transiently downregulated in the dentate gyrus 2, 4, 12 and 4, 12, 24 h after ECS treatment, respectively. GluR2 flip, flop and GluR1 flop were downregulated at 4 h. GluR2 flip remained downregulated at 12 h. In contrast, BDNF, NgR3 and GluR1 flip mRNA levels were upregulated. Thus, ECS treatment induces a transient regulation of factors important for neuronal plasticity. Our data provide correlations between ECS treatment and molecular events compatible with the hypothesis that both effects and side effects of ECT may be caused by structural synaptic rearrangements.

  12. EL DESARROLLO DE COMPETENCIAS COMUNICATIVAS A TRAVÉS DE SEMINARIOS TRANSVERSALES ECTS: UNA EXPERIENCIA EN LA UNIVERSIDAD DE JAÉN

    Directory of Open Access Journals (Sweden)

    María Luisa Pérez Cañado

    2011-04-01

    Full Text Available El presente artículo describe una experiencia novedosa en el desarrollo de competencias genéricas y específicas y en el fomento de la interdisciplinariedad y la transversalidad. Se trata de un sistema de seminarios ECTS – que también entroncan con el Plan de Acción Tutorial – que se han desarrollado en la Licenciatura en Filología Inglesa de la Universidad de Jaén durante este curso académico (2008-2009. Con ellos, hemos pretendido fomentar la coordinación entre el profesorado de dicha titulación, superar el individualismo que suele caracterizar a las actuaciones docentes en educación terciaria y realizar la transición desde la cultura tradicional de la enseñanza memorística y transmisiva hacia la cultura del aprendizaje crítico y significativo basado en competencias y no meramente contenidos. Tras justificar la necesidad de una experiencia de este tipo y describir su desarrollo, contenidos y evaluación en detalle, se presenta el estudio descriptivo que la ha acompañado. Dicha investigación nos ha permitido concluir que el sistema de seminarios ECTS ha resultado altamente beneficioso para el alumnado participante. Éste ha sido consciente de la existencia, desarrollo y utilidad de una serie de competencias genéricas y específicas esenciales para el filólogo inglés. Consideramos que, en nuestro contexto, estos seminarios ECTS han constituido un importante primer paso en la integración, enseñanza y evaluación de competencias en el currículo.

  13. Effect of primary particle size on spray formation, morphology and internal structure of alumina granules and elucidation of flowability and compaction behaviour

    Directory of Open Access Journals (Sweden)

    Pandu Ramavath

    2014-06-01

    Full Text Available Three different alumina powders with varying particle sizes were subjected to spray drying under identical conditions and effect of particle size on heat transfer efficiency and mechanism of formation of granules was elucidated. Morphology, internal structure and size distribution of granules were studied and evaluated with respect to their flow behaviour. In order to estimate the elastic interaction of granules, the granules were subjected to compaction under progressive loading followed by periodic unloading. Compaction curves were plotted and compressibility factor was estimated and correlated with predicted and measured green density values.

  14. Design of Prototype-Technology Evaluator and Research Aircraft (PTERA) Configuration for Loss of Control Flight Research, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The Area-I team has developed and fabricated the unmanned Prototype-Technology Evaluation and Research Aircraft or PTERA ("ptera" being Greek for wing, or...

  15. High Gain, Very Low Areal Density, Scalable RF Apertures Enabled by Membrane Aperture Shell Technology (MAST), Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose that the Membrane Aperture Shell Technology (MAST) approach be expanded with a specific focus on space exploration orbiting comm network RF aperture...

  16. High-Efficiency, Ka-band Solid-State Power Amplifier Utilizing GaN Technology, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — QuinStar Technology proposes to develop an efficient, solid-state power amplifier (SSPA), operating at Ka-band frequencies, for high data rate, long range space...

  17. High-Efficiency, Ka-Band Solid-State Power Amplifier Utilizing GaN Technology, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — QuinStar Technology proposes to develop a high-efficiency, solid-state power amplifier (SSPA), operating at Ka-band frequencies, for high data rate, long range space...

  18. Cost-Effective ISS Space-Environment Technology Validation of Advanced Roll-Out Solar Array (ROSA), Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Effort proposed is for detailed planning, configuration and hardware definition of a low-cost, but high technology payoff, ISS-based flight experiment that will...

  19. Cost-Effective ISS Space-Environment Technology Validation of Advanced Roll-Out Solar Array (ROSA), Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — DSS proposes to systematically mature, mitigate risk for; and perform hardware-based ground validations / demonstrations of a low-cost, high technology payoff,...

  20. Ect2/Pbl acts via Rho and polarity proteins to direct the assembly of an isotropic actomyosin cortex upon mitotic entry.

    Science.gov (United States)

    Rosa, André; Vlassaks, Evi; Pichaud, Franck; Baum, Buzz

    2015-03-09

    Entry into mitosis is accompanied by profound changes in cortical actomyosin organization. Here, we delineate a pathway downstream of the RhoGEF Pbl/Ect2 that directs this process in a model epithelium. Our data suggest that the release of Pbl/Ect2 from the nucleus at mitotic entry drives Rho-dependent activation of Myosin-II and, in parallel, induces a switch from Arp2/3 to Diaphanous-mediated cortical actin nucleation that depends on Cdc42, aPKC, and Par6. At the same time, the mitotic relocalization of these apical protein complexes to more lateral cell surfaces enables Cdc42/aPKC/Par6 to take on a mitosis-specific function-aiding the assembly of a relatively isotropic metaphase cortex. Together, these data reveal how the repolarization and remodeling of the actomyosin cortex are coordinated upon entry into mitosis to provide cells with the isotropic and rigid form they need to undergo faithful chromosome segregation and division in a crowded tissue environment. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

  1. "They'll Always Find a Way to Get to You": Technology Use in Adolescent Romantic Relationships and Its Role in Dating Violence and Abuse.

    Science.gov (United States)

    Stonard, Karlie E; Bowen, Erica; Walker, Kate; Price, Shelley A

    2015-06-11

    Electronic communication technology (ECT), such as mobile phones and online communication tools, is widely used by adolescents; however, the availability of such tools may have both positive and negative impacts within the context of romantic relationships. While an established literature has documented the nature, prevalence, and impact of traditional forms of adolescent dating violence and abuse (ADVA), limited empirical investigation has focused on the role of ECT in ADVA or what shall be termed technology-assisted adolescent dating violence and abuse (TAADVA) and how adolescents perceive the impact of TAADVA relative to ADVA. In this article, the authors explore the role ECT plays in adolescent romantic relationships and psychologically abusive and controlling ADVA behaviors and its perceived impact. An opportunity sample of 52 adolescents (22 males and 30 females) between the ages of 12 and 18 years participated in the study. One all-female and seven mixed-gendered semi-structured focus groups were conducted. Thematic analysis was used to identify three superordinate themes, including (a) perceived healthy versus unhealthy communication, (b) perceived monitoring and controlling communication, and (c) perceived impact of technology-assisted abuse compared with that in person. While ECTs had a positive impact on the development and maintenance of adolescent romantic relationships, such tools also provided a new avenue for unhealthy, harassment, monitoring, and controlling behaviors within these relationships. ECT was also perceived to provide unique impacts in terms of making TAADVA seem both less harmful and more harmful than ADVA experienced in person. Adolescents' perceptions and experiences of ECT in romantic relationships and TAADVA may also vary be gender. Implications of the findings are discussed, and recommendations are made for future research. © The Author(s) 2015.

  2. Development of the Phase-up Technology of the Radio Telescopes: 6.7 GHz Methanol Maser Observations with Phased Hitachi 32 m and Takahagi 32 m Radio Telescopes

    Science.gov (United States)

    Takefuji, K.; Sugiyama, K.; Yonekura, Y.; Saito, T.; Fujisawa, K.; Kondo, T.

    2017-11-01

    For the sake of high-sensitivity 6.7 GHz methanol maser observations, we developed a new technology for coherently combining the two signals from the Hitachi 32 m radio telescope and the Takahagi 32 m radio telescope of the Japanese Very long baseline interferometer Network (JVN), where the two telescopes were separated by about 260 m. After the two telescopes were phased as a twofold larger single telescope, the mean signal-to-noise ratio (S/N) of the 6.7 GHz methanol masers observed by the phased telescopes was improved to 1.254-fold higher than that of the single dish, through a very long baseline interferometry (VLBI) experiment on the 50 km baseline of the Kashima 34 m telescope and the 1000 km baseline of the Yamaguchi 32 m telescope. Furthermore, we compared the S/Ns of the 6.7 GHz maser spectra for two methods. One is a VLBI method and the other is the newly developed digital position switching that is a similar technology to that used in noise-canceling headphones. Finally, we confirmed that the mean S/N of method of the digital position switching (ON-OFF) was 1.597-fold higher than that of the VLBI method.

  3. Benefits of Advanced Control Room Technologies: Phase One Upgrades to the HSSL, Research Plan, and Performance Measures

    Energy Technology Data Exchange (ETDEWEB)

    Le Blanc, Katya [Idaho National Lab. (INL), Idaho Falls, ID (United States); Joe, Jeffrey [Idaho National Lab. (INL), Idaho Falls, ID (United States); Rice, Brandon [Idaho National Lab. (INL), Idaho Falls, ID (United States); Ulrich, Thomas [Idaho National Lab. (INL), Idaho Falls, ID (United States); Boring, Ronald [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-05-01

    Control Room modernization is an important part of life extension for the existing light water reactor fleet. None of the 99 currently operating commercial nuclear power plants in the U.S. has completed a full-scale control room modernization to date. A full-scale modernization might, for example, entail replacement of all analog panels with digital workstations. Such modernizations have been undertaken successfully in upgrades in Europe and Asia, but the U.S. has yet to undertake a control room upgrade of this magnitude. Instead, nuclear power plant main control rooms for the existing commercial reactor fleet remain significantly analog, with only limited digital modernizations. Previous research under the U.S. Department of Energy’s Light Water Reactor Sustainability Program has helped establish a systematic process for control room upgrades that support the transition to a hybrid control room. While the guidance developed to date helps streamline the process of modernization and reduce costs and uncertainty associated with introducing digital control technologies into an existing control room, these upgrades do not achieve the full potential of newer technologies that might otherwise enhance plant and operator performance. The aim of the control room benefits research is to identify previously overlooked benefits of modernization, identify candidate technologies that may facilitate such benefits, and demonstrate these technologies through human factors research. This report describes the initial upgrades to the HSSL and outlines the methodology for a pilot test of the HSSL configuration.

  4. Clinical efficacy of formula-based bifrontal versus right unilateral electroconvulsive therapy (ECT) in the treatment of major depression among elderly patients: a pragmatic, randomized, assessor-blinded, controlled trial.

    Science.gov (United States)

    Bjølseth, Tor Magne; Engedal, Knut; Benth, Jūratė Šaltytė; Dybedal, Gro Strømnes; Gaarden, Torfinn Lødøen; Tanum, Lars

    2015-04-01

    No prior study has compared the efficacy of bifrontal (BF) vs right unilateral (RUL) electroconvulsive therapy (ECT) by including the subgroup that is most likely to receive it: only elderly patients with major depression (MD). This single-site, randomized, assessor-blinded, controlled trial was conducted from 2009 to 2013. Seventy-three elderly patients with MD, unipolar and bipolar, were treated with a course of formula-based BF ECT or RUL ECT. The 17-item Hamilton Rating Scale for Depression (HRSD17) was used to measure efficacy. Safety was assessed with the Mini Mental State Examination (MMSE). Both electrode placements resulted in highly significant downward trends in symptom severity (all p<0.001), with a non-significant difference between methods (p=0.703). At the end of the ECT course, response rates for the BF and RUL group were 63.9% and 67.6%, respectively. Short-term remission, defined as an HRSD17 score≤7, was achieved in 14 (38.9%) patients in the BF group and 19 (51.4%) patients in the RUL group. Global cognitive function, as measured by the MMSE, did not deteriorate in the two treatment groups. The small number of subjects may have led to reduced power to detect real differences. The MMSE is not sufficient to ascertain the negative effect of ECT on cognition. This study indicates that formula-based BF and RUL ECT are equally efficacious, and that remission rates of formula-based dosing are lower than those previously reported for titrated dosing, in a clinical sample of elderly patients with MD. ClinicalTrials.gov NCT01559324. Copyright © 2015 The Authors. Published by Elsevier B.V. All rights reserved.

  5. Características clínico-patológicas de las pacientes con diagnóstico de embarazo ectópico en el Hospital Nacional Edgardo Rebagliati Martins entre 1998 y 2002

    OpenAIRE

    Jesús Mario Luglio Villanueva; Lizeth Díaz Ledesma; Eduardo Cáceres Chu

    2005-01-01

    Objetivos: Determinar las características clínicas y patológicas de las pacientes con diagnóstico de embarazo ectópico en el Hospital Nacional Edgardo Rebagliati Martins (HNERM) entre 1998 y 2002. Material y Métodos: En un estudio descriptivo y retrospectivo se incluyó 203 casos de embarazo ectópico entre enero de 1998 y diciembre del 2002 en el HNERM. Resultados: Se encontró una frecuencia de 0,55%. El mayor porcentaje de pacientes presentó una edad entre 25-39años (89,17%), menarquia entre ...

  6. Technology development in the U.S. and Japan: the case of the phase-shifting mask

    Science.gov (United States)

    Schellenberg, Frank; Okimoto, Dan; Raphael, Jim; Shirouzu, Norihiko

    1994-01-01

    The status of American competitiveness in high technology, and in particular the semiconductor industry, has been the subject of concern for some time now.1 With the rise of Japanese manufactures to preeminence in the manufacturing of DRAM (Dynamic Random Access Memory) chips during the 1980's, the fundamental assumptions of modern economic theory have been called into question.2 Various factors have been cited by various authors to account for the recent rise in Japanese competitiveness, including industrial policies of the Japanese government, differences in the cost of capital, investments in research and development, and the requirement of American companies to post financial results quarterly.3 There is, however, a real need for concrete case studies, which can examine the actual history of a technology and establish mechanisms of cause and effect.

  7. Advanced CIGS Photovoltaic Technology: Annual Technical Report--Phase II, 15 November 2002--14 November 2003

    Energy Technology Data Exchange (ETDEWEB)

    Delahoy, A. E.; Chen, L.

    2004-05-01

    The objective of this subcontract is to develop and integrate the various pieces of new technology that EPV considers enabling for cost-effective production of CIGS modules. EPV has conducted research to help generate a technology base for production of CIGS PV modules using vacuum deposition of CIGS onto glass. This strategy is consistent with the observation that, despite there being several approaches to forming device-quality CIGS, vacuum deposition has maintained the world record for the highest-efficiency CIGS device. A record thin-film solar cell efficiency of 19.2% (with Ni-Al grid and MgF2 ARC) for a 0.41-cm2 device was achieved by NREL in 2003 using vacuum-deposited CIGS. The deposition employed four point sources and detection of the Cu-poor to Cu-rich transition for process control. To extend this type of processing to the realm of large-area substrates, EPV developed vacuum equipment designed for heating and coating 0.43-m2 moving substrates, with a projected further scale up to 0.79 m2. The substrates are typically low-cost, soda-lime glass, and the materials are supplied to the moving substrates using novel linear-source technology developed by EPV. The use of elemental selenium rather than toxic H2Se gas helps make for a safe manufacturing environment. These choices concerning film deposition, substrates, and source materials help to minimize the processing costs of CIGS.

  8. Technical and economic assessment of processes for the production of butanol and acetone. Phase two: analysis of research advances. Energy Conversion and Utilization Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    None

    1984-08-01

    The initial objective of this work was to develop a methodology for analyzing the impact of technological advances as a tool to help establish priorities for R and D options in the field of biocatalysis. As an example of a biocatalyzed process, butanol/acetone fermentation (ABE process) was selected as the specific topic of study. A base case model characterizing the technology and economics associated with the ABE process was developed in the previous first phase of study. The project objectives were broadened in this second phase of work to provide parametric estimates of the economic and energy impacts of a variety of research advances in the hydrolysis, fermentation and purification sections of the process. The research advances analyzed in this study were based on a comprehensive literature review. The six process options analyzed were: continuous ABE fermentaton; vacuum ABE fermentation; Baelene solvent extraction; HRI's Lignol process; improved prehydrolysis/dual enzyme hydrolysis; and improved microorganism tolerance to butanol toxicity. Of the six options analyzed, only improved microorganism tolerance to butanol toxicity had a significant positive effect on energy efficiency and economics. This particular process option reduced the base case production cost (including 10% DCF return) by 20% and energy consumption by 16%. Figures and tables.

  9. Recent progress, challenges and trends in trace determination of drug analysis using molecularly imprinted solid-phase microextraction technology.

    Science.gov (United States)

    Ansari, Saeedeh; Karimi, Majid

    2017-03-01

    The quantification of drugs in biological samples is a significant task for determination of the physiological efficiency in evaluated drugs in the drug discovery. To analysis of the chemical compounds at the trace and ultratrace levels, adequate analytical procedures should be applied. Therefore, sample preparation method undoubtedly is the most important stage in the trace determination process. In spite of the great growth of analytical instrumentation during the recent years, sample preparation is still nowadays considered the impasse of the all analytical procedure, especially in drugs analysis. Because of the low concentration level of drugs in blood, plasma, and the diversity of the metabolites, the chosen extraction technique should be almost perfect. Solid-phase microextraction (SPME) is a powerful, simple, fast and an equilibrium-based sample preparation method that permits integration of sampling, sample clean-up, and pre-concentration in a single solvent-free step for chemical analysis. Molecularly imprinted polymers (MIPs) that provided by the presence of a template during their synthesis are the stable polymers with molecular recognition abilities and excellent materials which provide selectivity to sample preparation. Because of its characteristics such as easy preparation, high selectivity, and chemical stability, MIP is widely utilized in many analytical fields. Accordingly, the molecular imprinting and SPME methods combination would prepare a strong analytical instrumentation which comprises simplicity, flexibility, and the selectivity characteristics of both methods. This review focuses on the application of solid-phase microextraction method coupled with molecularly imprinted polymers, namely molecularly imprinted solid-phase microextraction (MISPME), for trace determination in drug analysis. Copyright © 2016 Elsevier B.V. All rights reserved.

  10. Local and integral ulrasonic gauges for two-phase flow instrumentation in nuclear reactor and safety technology. Final report

    International Nuclear Information System (INIS)

    Chochlov, V.N.; Duncev, A.V.; Ivanov, V.V.; Kontelev, V.V.; Melnikov, V.I.; Stoppel, L.K.; Prasser, H.M.; Zippe, W.; Zschau, J.; Zboray, R.

    2000-11-01

    The present project was executed in the frame of a co-operation agreement between FZR and the scientific group of Prof. Melnikov of the technical University of Nishny Novgorod (TUNN) in the Russian Federation. It is part of the Federal Government's programme for the provision of advice for Eastern Europe on the building up of democracy and social market economy (TRANSFORM Programme). New methods of two-phase flow instrumentation were developed: Intrusive wave-guide probes can be used for local void fraction measurements. The new ultrasonic mesh sensors allow a fast two-phase flow visualisation with about 250 frames per second. Experiments carried out at the test loop in Rossendorf, but also the tests at the DESIRE facility in Delft have shown that both local wave-guide probes and ultrasonic mesh sensors can be successfully applied under the conditions of high pressure and temperature steam-water mixture, as well as in organic liquids and refrigerants. Furthermore, non-intrusive wave-guide sensors as well as density sensors based on the measurement of the wave propagation velocity in wave-guides immersed into the measuring liquid were developed and tested. In the present stage of the development, the non-intrusive sensors can rather be used for a qualitative gas respectively level detection than for void fraction measurements. The wave-guide density sensor was successfully demonstrated that it is able to measure densities of single-phase liquids. It requires further development of the electronic circuitry. The main innovation was achieved by the development of the ultrasonic mesh sensor, the resoluting capability of which is comparable to methods like electrical wire-mesh sensors and ultra-fast X-ray tomography, while the device itself is robust and low expensive. (orig.) [de

  11. Workshop `Measurement technology for steady state and transient multi phase flows`; Workshop `Messtechnik fuer stationaere und transiente Mehrphasenstroemungen`

    Energy Technology Data Exchange (ETDEWEB)

    Prasser, H.M. [ed.

    1997-12-01

    There is hardly another area of physics which has a comparable multiplicity of phenomena, like flow in multi-phase mixtures. The wishes of experimenters regarding measurement technique are correspondingly great: Apart from the conventional parameters of pressure, temperature and speed of flow, as great a collection with resolution of the instantaneous phase distribution is required. Also, the phases themselves frequently consists of several components, whose concentration should also be measured. The enormous progress which has recently been made with laser optics and tomographic processes, must be compared with a long list of unsolved problems, above all where non-contact measurement is concerned. The attempts at solutions are multifarious, the need for the exchange of experience is great and the comparson of measurement processes with one another must be strengthened. The workshop has set itself these targets. (orig.) [Deutsch] Es gibt kaum ein anderes Gebiet der Physik, das eine vergleichbare Vielfalt der Erscheinungen aufweist wie Stroemungen von Mehrphasengemischen. Entsprechend gross sind die Wuensche der Experimentatoren hinsichtlich der Messtechnik: Neben den klassischen Parametern Druck, Temperatur und Stroemungsgeschwindigkeit wird eine moeglichst hoch aufloesende Erfassung der momentanen Phasenverteilung benoetigt. Ausserdem bestehen die Phasen selbst haeufig aus mehreren Komponenten, deren Konzentration ebenfalls gemessen werden soll. Den enormen Fortschritten, ie mit laseroptischen und tomographischen Verfahren in letzter Zeit gemacht wurden, steht nach wie vor eine lange Liste bisher ungeloester Aufgaben gegenueber, vor allen Dingen, wenn beruehrungslos gemessen werden soll. Die Loesungsansaetze sind vielfaeltig, der Bedarf an Erfahrungsaustausch ist gross, der Vergleich der Messverfahren untereinander muss verstaerkt werden. Diesen Zielen hatte sich der Workshop ``Messtechnik fuer tationaere und transiente Mehrphasenstroemungen`` verschrieben.

  12. Two-dimensional parallel array technology as a new approach to automated combinatorial solid-phase organic synthesis

    Science.gov (United States)

    Brennan; Biddison; Frauendorf; Schwarcz; Keen; Ecker; Davis; Tinder; Swayze

    1998-01-01

    An automated, 96-well parallel array synthesizer for solid-phase organic synthesis has been designed and constructed. The instrument employs a unique reagent array delivery format, in which each reagent utilized has a dedicated plumbing system. An inert atmosphere is maintained during all phases of a synthesis, and temperature can be controlled via a thermal transfer plate which holds the injection molded reaction block. The reaction plate assembly slides in the X-axis direction, while eight nozzle blocks holding the reagent lines slide in the Y-axis direction, allowing for the extremely rapid delivery of any of 64 reagents to 96 wells. In addition, there are six banks of fixed nozzle blocks, which deliver the same reagent or solvent to eight wells at once, for a total of 72 possible reagents. The instrument is controlled by software which allows the straightforward programming of the synthesis of a larger number of compounds. This is accomplished by supplying a general synthetic procedure in the form of a command file, which calls upon certain reagents to be added to specific wells via lookup in a sequence file. The bottle position, flow rate, and concentration of each reagent is stored in a separate reagent table file. To demonstrate the utility of the parallel array synthesizer, a small combinatorial library of hydroxamic acids was prepared in high throughput mode for biological screening. Approximately 1300 compounds were prepared on a 10 μmole scale (3-5 mg) in a few weeks. The resulting crude compounds were generally >80% pure, and were utilized directly for high throughput screening in antibacterial assays. Several active wells were found, and the activity was verified by solution-phase synthesis of analytically pure material, indicating that the system described herein is an efficient means for the parallel synthesis of compounds for lead discovery. Copyright 1998 John Wiley & Sons, Inc.

  13. Development of controlled drilling technology and measurement method in the borehole. Phase 2. Upgrading of drilling and measurement system and its application to the fault

    International Nuclear Information System (INIS)

    Kiho, Kenzo; Shin, Koichi; Ohtsu, Masashi

    2009-01-01

    In Japan, the soft sedimentary rock of the Neogene tertiary is being focused as a host rock for High Level Waste (HLW) disposal. Especially, the soft sedimentary rock at the coastal area is thought to be one of the best candidates, since there is little driving force of the underground water. The measurement and logging of the bore hole in order to investigate the hydro-geological and geo-mechanical conditions of the host rock is a very important way to examine the potential of the disposal candidates. Since 2000, CRIEPI (Central Research Institute of Electric Power Industry) has been conducting the project on controlled drilling and the logging/measurement technologies in its boreholes. Based on the results of phase 1(2000-2004), CRIEPI has been developing the drilling and logging/measurement technologies for fault zone during phase 2 (2005-2007). The drilling technology such as drilling for fault zone, horizontal drilling, long hole drilling, coring and locality detection was developed and these applicability was confirmed while drilling. The permeability/water-sampling/imaging tool was revised to apply wider borehole and longer measuring section. The WL-LWD was improved to be tougher in the hole. The borehole pressure meter and stress measurement tools were unified. Each tools necessary for the monitoring system is manufactured. The applicability of these tools and systems were verified in the borehole. After conducting surveys for the Omagari fault distributing at the Kami-horonobe area, the drilling site and borehole trace was decided in 2005. Considering the planned trace, the bore hole was drilled to the 683.5m long and its core recovery was 99.8%. Using borehole logging/measurement/survey, the geological, hydrological, geo-mechanical, geophysical and geochemical data were collected and the Omagari fault was characterized. (author)

  14. Lifecycle Industry GreenHouse gas, Technology and Energy through the Use Phase (LIGHTEnUP) – Analysis Tool User’s Guide

    Energy Technology Data Exchange (ETDEWEB)

    Morrow, William R. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Shehabi, Arman [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Smith, Sarah [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division

    2016-06-22

    The LIGHTEnUP Analysis Tool (Lifecycle Industry GreenHouse gas, Technology and Energy through the Use Phase) has been developed for The United States Department of Energy’s (U.S. DOE) Advanced Manufacturing Office (AMO) to forecast both the manufacturing sector and product life-cycle energy consumption implications of manufactured products across the U.S. economy. The tool architecture incorporates publicly available historic and projection datasets of U.S. economy-wide energy use including manufacturing, buildings operations, electricity generation and transportation. The tool requires minimal inputs to define alternate scenarios to business-as-usual projection data. The tool is not an optimization or equilibrium model and therefore does not select technologies or deployment scenarios endogenously. Instead, inputs are developed exogenous to the tool by the user to reflect detailed engineering calculations, future targets and goals, or creative insights. The tool projects the scenario’s energy, CO2 emissions, and energy expenditure (i.e., economic spending to purchase energy) implications and provides documentation to communicate results. The tool provides a transparent and uniform system of comparing manufacturing and use-phase impacts of technologies. The tool allows the user to create multiple scenarios that can reflect a range of possible future outcomes. However, reasonable scenarios require careful attention to assumptions and details about the future. This tool is part of an emerging set of AMO’s life cycle analysis (LCA) tool such as the Material Flows the Industry (MFI) tool, and the Additive Manufacturing LCA tool.

  15. ¿Son viables los créditos ects otorgados a las matemáticas en los nuevos planes de estudio de LADE?

    Directory of Open Access Journals (Sweden)

    Álvarez Martínez, Pedro

    2006-01-01

    Full Text Available EL nuevo plan de estudios para la Administración y Dirección de Empresas (ADE va encaminado a resolver los problemas de la vida real en las empresas. Las disciplinas que lo contemplan están reguladas por los créditos ECTS (European Credit Transfer System, establecidos por la Commission of the European Community, con objeto de proporcionar procedimientos comunes que garanticen un reconocimiento académico de los estudios en los distintos paises que la integran. La presencia de las Matemáticas en los Planes es debido a su carácter instrumental, sus contenidos son utilizados por la demás disciplinas y le otorga el papel de ser una asignatura de servicio y “transversal”. El presente trabajo desarrolla una metodología empírica, determinando la temporización docente/discente de los contenidos matemáticos que son utilizados por todas las disciplinas que componen la titulación de ADE. Dichos contenidos han sido contabilizados y cuantificado en términos de créditos ECTS, aplicando los criterios que caracterizan su definición. El resultado obtenido pone de manifiesto que los créditos del nuevo plan no satisfacen las exigencias que caracterizan a los créditos ECTS para el aprendizaje de las matemáticas. Dado que los contenidos matemáticos no han cambiado, por exigencias de las disciplinas de ADE, los resultados obtenidos con datos experimentales, tras la reducción de horas de docencia, muestran lo siguiente: Con el Plan del 1973 (10 horas semanales de clase de Matemáticas se necesitaban 3 convocatorias para aprobar, con el plan actual (4 horas semanales de clase se necesitan 6 convocatorias. La reducción ha supuesto para el alumno un incremento de año y medio de estancia en la universidad, y como consecuencia aumenta el coste. Estudiar matemáticas para ADE era mas barato “antes” que “ahora”. La propuesta de los nuevos planes hace inviable el aprendizaje de las matemáticas en ADE.

  16. Hawaii Energy and Environmental Technologies (HEET) Initiative

    Science.gov (United States)

    2010-08-01

    5Vthe Avogadro number. An evolution equation foremen is: dXIdt = -{kdes + kMMo) Xs + kads (1 - X) s x (14) If it is assumed that the fractional...other provision of law , no person shall be sub|ect to any penalty for failing to comply with a collection of information if it does not display a...Technologies (HEET) Initiative 5a. CONTRACT NUMBER 5b. GRANT NUMBER N00014-07-1-1094 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR( S ) Rocheleau, Richard E

  17. Application of the NOx Reaction Model for Development of Low-NOx Combustion Technology for Pulverized Coals by Using the Gas Phase Stoichiometric Ratio Index

    Directory of Open Access Journals (Sweden)

    Kenji Yamamoto

    2011-03-01

    Full Text Available We previously proposed the gas phase stoichiometric ratio (SRgas as an index to evaluate NOx concentration in fuel-rich flames. The SRgas index was defined as the amount of fuel required for stoichiometric combustion/amount of gasified fuel, where the amount of gasified fuel was the amount of fuel which had been released to the gas phase by pyrolysis, oxidation and gasification reactions. In the present study we found that SRgas was a good index to consider the gas phase reaction mechanism in fuel-rich pulverized coal flames. When SRgas < 1.0, NOx concentration was strongly influenced by the SRgas value. NOx concentration was also calculated by using a reaction model. The model was verified for various coals, particle diameters, reaction times, and initial oxygen concentrations. The most important reactions were gas phase NOx reduction reactions by hydrocarbons. The hydrocarbon concentration was estimated based on SRgas. We also investigated the ratio as an index to develop a new low-NOx combustion technology for pulverized coals. We examined the relation between local SRgas distribution in the fuel-rich region in the low-NOx flame and NOx emissions at the furnace exit, by varying burner structures. The relationship between local SRgas value and local NOx concentration was also examined. When a low-NOx type burner was used, the value of SRgas in the flame was readily decreased. When the local SRgas value was the same, it was difficult to influence the local NOx concentration by changing the burner structure. For staged combustion, the most important item was to design the burner structure and arrangement so that SRgas could be lowered as much as possible just before mixing with staged air.

  18. Effect of realistic and filtered stellar photometric noise on the detection of moons using photometric transit timing

    Directory of Open Access Journals (Sweden)

    Lewis K.

    2011-02-01

    Full Text Available The photometric transit timing technique was proposed by Szabó et al. (2006 as a method for discovering moons of transiting extrasolar planets. In the preliminary analysis of this technique, it was assumed that the noise in the transit lightcurve was well described by uncorrelated white noise. However, this assumption is not necessarily realistic. To determine the effect of using more realistic lightcurves, transit timing uncertainties are calculated for the case of white noise, measured solar photometric noise and measured solar photometric noise that has been filtered. It is found that for light curves contaminated with realistic photometric noise, the transit timing uncertainties are dramatically increased (and thus moon detection reduced. In addition, we find that while filtering reduced this problem, it did not negate it.

  19. Introducción del sistema europeo de transferencia de créditos (ECTS en la Facultad de Medicina de La Laguna

    Directory of Open Access Journals (Sweden)

    Eduardo Doménech Martínez

    Full Text Available Para la convergencia europea se deben modificar los planes de estudios de las facultades de medicina de forma que el Sistema de Transferencia de Créditos Europeo (ECTS esté incorporado a los nuevos planes del estudio antes del 2010. Objetivos: Experimentar la introducción del ECTS en el segundo cuatrimestre de quinto curso, modificando la metodología docente. Diseño del estudio: Se adaptaron los programas teóricos y prácticos y se establecieron unos objetivos docentes y un sistema de evaluación para las asignaturas de Patología Médica de la Sangre y de la Hematopoyesis, de las Enfermedades Infecciosas y del Sistema Endocrino y Nutrición, Pediatría y Patología Quirúrgica de Cara, Cuello, Mama y Glándulas Endocrinas. Se realizaron encuestas a los alumnos en el transcurso de cuatrimestre, utilizando para las respuestas una escala de tipo Likert con cinco grados. Se analizó la priorización de las competencias genéricas y específicas de los alumnos. Para el análisis de los resultados se aplicaron pruebas no paramétricas. Resultados: Los 37 créditos actuales se transformaron en 29.5 ECTS, con 736.5 horas de trabajo para los alumnos. Se redujeron los programas teóricos de 186 lecciones en total a 134 (reducción del 27.96 %. Los alumnos prepararon y presentaron 58 casos clínicos bajo la supervisión de sus tutores. Los profesores consideraron que el aprendizaje teórico había sido similar al de cursos anteriores (66.6 % y el práctico había sido mejor (73.3 %. El 73.3 % de los alumnos contestaron que el proyecto debía mejorarse, mediante la reducción de la carga de trabajo de los alumnos y mejora del sistema de evaluación. Los alumnos apreciaron de forma estadísticamente significativa que mejoró la docencia práctica y su capacidad para preparar y presentar casos clínicos. El rendimiento académico de los alumnos fue significativamente mejor que el de los alumnos del curso anterior. Los estudiantes estuvieron de acuerdo

  20. Amorphous silicon photovoltaic maufacturing technology, Phase 2A. Annual subcontract report, 1 May 1992--30 April 1993

    Energy Technology Data Exchange (ETDEWEB)

    Duran, G.; Mackamul, K.; Metcalf, D. [Utility Power Group, Chatsworth, CA (United States); Koniares, A.; Skinner, D.; Volltrauer, H. [Advanced Photovoltaic Systems, Inc., Princeton, NJ (United States)

    1994-02-01

    This report describes teamed research by Utility Power Group (UPG) and Advanced Photovoltaic Systems, Inc., (APS) to advance photovoltaic (PV) manufacturing technologies, reduce module production costs, increase average module performance, and increase the existing production capacity. UPG and APS conducted parallel efforts to develop their manufacturing lines. Areas of focus included encapsulation and termination, product design, process and quality control, and automation. UPG improved the existing encapsulation system by developing advanced encapsulation materials and processes, resulting in a module that does not require backing glass. UPG also developed advanced termination materials and processes. APS performed development activities centered on the EUREKA manufacturing line. Developments in the APS EUREKA encapsulation system were in addition to the UPG activity on encapsulation, and they offer an alternative approach to the problems of encapsulating large-area, thin-film modules.

  1. Local and integral ulrasonic gauges for two-phase flow instrumentation in nuclear reactor and safety technology. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Chochlov, V.N.; Duncev, A.V.; Ivanov, V.V.; Kontelev, V.V.; Melnikov, V.I.; Stoppel, L.K. [Technical State Univ. of Nishny Novgorod (Russian Federation); Prasser, H.M.; Zippe, W.; Zschau, J. [Forschungszentrum Rossendorf e.V. (FZR) (Germany). Inst. fuer Sicherheitsforschung; Zboray, R. [Technische Univ. Delft (Netherlands). Interfacultair Reactor Inst.

    2000-11-01

    The present project was executed in the frame of a co-operation agreement between FZR and the scientific group of Prof. Melnikov of the technical University of Nishny Novgorod (TUNN) in the Russian Federation. It is part of the Federal Government's programme for the provision of advice for Eastern Europe on the building up of democracy and social market economy (TRANSFORM Programme). New methods of two-phase flow instrumentation were developed: Intrusive wave-guide probes can be used for local void fraction measurements. The new ultrasonic mesh sensors allow a fast two-phase flow visualisation with about 250 frames per second. Experiments carried out at the test loop in Rossendorf, but also the tests at the DESIRE facility in Delft have shown that both local wave-guide probes and ultrasonic mesh sensors can be successfully applied under the conditions of high pressure and temperature steam-water mixture, as well as in organic liquids and refrigerants. Furthermore, non-intrusive wave-guide sensors as well as density sensors based on the measurement of the wave propagation velocity in wave-guides immersed into the measuring liquid were developed and tested. In the present stage of the development, the non-intrusive sensors can rather be used for a qualitative gas respectively level detection than for void fraction measurements. The wave-guide density sensor was successfully demonstrated that it is able to measure densities of single-phase liquids. It requires further development of the electronic circuitry. The main innovation was achieved by the development of the ultrasonic mesh sensor, the resoluting capability of which is comparable to methods like electrical wire-mesh sensors and ultra-fast X-ray tomography, while the device itself is robust and low expensive. (orig.) [German] Das vorliegende Projekt wurde im Rahmen einer Kooperationsvereinbarung zwischen dem Forschungszentrum Rossendorf (FZR) und der wissenschaftlichen Gruppe von Prof. Melnikov von der

  2. JV TASK 45-MERCURY CONTROL TECHNOLOGIES FOR ELECTRIC UTILITIES BURNING LIGNITE COAL, PHASE I BENCH-AND PILOT-SCALE TESTING

    Energy Technology Data Exchange (ETDEWEB)

    John H. Pavlish; Michael J. Holmes; Steven A. Benson; Charlene R. Crocker; Edwin S. Olson; Kevin C. Galbreath; Ye Zhuang; Brandon M. Pavlish

    2003-10-01

    The Energy & Environmental Research Center has completed the first phase of a 3-year, two-phase consortium project to develop and demonstrate mercury control technologies for utilities that burn lignite coal. The overall project goal is to maintain the viability of lignite-based energy production by providing utilities with low-cost options for meeting future mercury regulations. Phase I objectives are to develop a better understanding of mercury interactions with flue gas constituents, test a range of sorbent-based technologies targeted at removing elemental mercury (Hg{sup o}) from flue gases, and demonstrate the effectiveness of the most promising technologies at the pilot scale. The Phase II objectives are to demonstrate and quantify sorbent technology effectiveness, performance, and cost at a sponsor-owned and operated power plant. Phase I results are presented in this report along with a brief overview of the Phase II plans. Bench-scale testing provided information on mercury interactions with flue gas constituents and relative performances of the various sorbents. Activated carbons were prepared from relatively high-sodium lignites by carbonization at 400 C (752 F), followed by steam activation at 750 C (1382 F) and 800 C (1472 F). Luscar char was also steam-activated at these conditions. These lignite-based activated carbons, along with commercially available DARCO FGD and an oxidized calcium silicate, were tested in a thin-film, fixed-bed, bench-scale reactor using a simulated lignitic flue gas consisting of 10 {micro}g/Nm{sup 3} Hg{sup 0}, 6% O{sub 2}, 12% CO{sub 2}, 15% H{sub 2}O, 580 ppm SO{sub 2}, 120 ppm NO, 6 ppm NO{sub 2}, and 1 ppm HCl in N{sub 2}. All of the lignite-based activated (750 C, 1382 F) carbons required a 30-45-minute conditioning period in the simulated lignite flue gas before they exhibited good mercury sorption capacities. The unactivated Luscar char and oxidized calcium silicate were ineffective in capturing mercury. Lignite

  3. A wide range ultra-low power Phase-Locked Loop with automatic frequency setting in 130 nm CMOS technology for data serialisation

    International Nuclear Information System (INIS)

    Firlej, M.; Fiutowski, T.; Idzik, M.; Moroń, J.; Świentek, K.

    2015-01-01

    The design and measurements results of a wide frequency range ultra-low power Phase-Locked Loop (PLL) for applications in readout systems of particle physics detectors are presented. The PLL was fabricated in a 130 nm CMOS technology. To allow the implementation of different data serialisation schemes multiple division factors (6, 8, 10, 16) were implemented in the PLL feedback loop. The main PLL block—VCO works in 16 frequency ranges/modes, switched either manually or automatically. A dedicated automatic frequency mode switching circuit was developed to allow simple frequency tuning. Although the PLL was designed and simulated for a frequency range of 30 MHz–3 GHz, due to the SLVS interface limits, the measurements were done only up to 1.3 GHz. The full PLL functionality was experimentally verified, confirming a very low and frequency scalable power consumption (0.7 mW at 1 GHz)

  4. A wide range ultra-low power Phase-Locked Loop with automatic frequency setting in 130 nm CMOS technology for data serialisation

    Science.gov (United States)

    Firlej, M.; Fiutowski, T.; Idzik, M.; Moroń, J.; Świentek, K.

    2015-12-01

    The design and measurements results of a wide frequency range ultra-low power Phase-Locked Loop (PLL) for applications in readout systems of particle physics detectors are presented. The PLL was fabricated in a 130 nm CMOS technology. To allow the implementation of different data serialisation schemes multiple division factors (6, 8, 10, 16) were implemented in the PLL feedback loop. The main PLL block—VCO works in 16 frequency ranges/modes, switched either manually or automatically. A dedicated automatic frequency mode switching circuit was developed to allow simple frequency tuning. Although the PLL was designed and simulated for a frequency range of 30 MHz-3 GHz, due to the SLVS interface limits, the measurements were done only up to 1.3 GHz. The full PLL functionality was experimentally verified, confirming a very low and frequency scalable power consumption (0.7 mW at 1 GHz).

  5. Design of a surface-based factory for the production of life support and technology support products. Phase 2: Integrated water system for a space colony

    Science.gov (United States)

    1989-01-01

    Phase 2 of a conceptual design of an integrated water treatment system to support a space colony is presented. This includes a breathable air manufacturing system, a means of drilling for underground water, and storage of water for future use. The system is to supply quality water for biological consumption, farming, residential and industrial use and the water source is assumed to be artesian or subsurface and on Mars. Design criteria and major assumptions are itemized. A general block diagram of the expected treatment system is provided. The design capacity of the system is discussed, including a summary of potential users and the level of treatment required; and, finally, various treatment technologies are described.

  6. Stabilize ash using Clemson's sintering process (Part 1 - Phase 1 results): Mixed waste fly ash stabilization. Innovative technology summary report

    International Nuclear Information System (INIS)

    1998-12-01

    Incineration of applicable Department of Energy (DOE) mixed wastes has produced a secondary waste stream of radioactive and Resource Conservation and Recovery Act (RCRA) hazardous fly ash that also requires treatment before land disposal. Unlike bottom ash, fly ash usually contains constituents making efficient stabilization difficult. For example, fly ash from the DOE Waste Experimental Reduction Facility (WERF) incinerator at the Idaho National Engineering and Environmental Laboratory (INEEL) contains volatile metals, metal salts, high concentrations of zinc, and unburned organic residues. All of these constituents can effect the stabilization process. The Department of Energy, and in particular the Mixed Waste Focus Area (MWFA) of EM-50, has stated the need for improved stabilization methods would accept a higher ash waste loading while meeting waste form disposal criteria. These alternative stabilization technologies should include delivery systems to minimize worker exposure and minimize secondary waste generation, while maximizing operational flexibility and radionuclide containment. Currently, the standard practice for stabilizing ash is mixing with Portland cement at room temperature. This standard practice produces a significant increase of waste material volume or has difficulty in adequately stabilizing the components in the fly ash to ensure regulatory requirements are consistently satisfied. To address these fly ash stabilization shortcomings, the MWFA, a DOE/EM-50 program, invested in the development of several fly ash stabilization alternatives, including the Clemson University sintering method

  7. Mouse repeated electroconvulsive seizure (ECS) does not reverse social stress effects but does induce behavioral and hippocampal changes relevant to electroconvulsive therapy (ECT) side-effects in the treatment of depression.

    Science.gov (United States)

    van Buel, Erin M; Sigrist, Hannes; Seifritz, Erich; Fikse, Lianne; Bosker, Fokko J; Schoevers, Robert A; Klein, Hans C; Pryce, Christopher R; Eisel, Ulrich Lm

    2017-01-01

    Electroconvulsive therapy (ECT) is an effective treatment for depression, but can have negative side effects including amnesia. The mechanisms of action underlying both the antidepressant and side effects of ECT are not well understood. An equivalent manipulation that is conducted in experimental animals is electroconvulsive seizure (ECS). Rodent studies have provided valuable insights into potential mechanisms underlying the antidepressant and side effects of ECT. However, relatively few studies have investigated the effects of ECS in animal models with a depression-relevant manipulation such as chronic stress. In the present study, mice were first exposed to chronic social stress (CSS) or a control procedure for 15 days followed by ECS or a sham procedure for 10 days. Behavioral effects were investigated using an auditory fear conditioning (learning) and expression (memory) test and a treadmill-running fatigue test. Thereafter, immunohistochemistry was conducted on brain material using the microglial marker Iba-1 and the cholinergic fibre marker ChAT. CSS did not increase fear learning and memory in the present experimental design; in both the control and CSS mice ECS reduced fear learning and fear memory expression. CSS induced the expected fatigue-like effect in the treadmill-running test; ECS induced increased fatigue in CSS and control mice. In CSS and control mice ECS induced inflammation in hippocampus in terms of increased expression of Iba-1 in radiatum of CA1 and CA3. CSS and ECS both reduced acetylcholine function in hippocampus as indicated by decreased expression of ChAT in several hippocampal sub-regions. Therefore, CSS increased fatigue and reduced hippocampal ChAT activity and, rather than reversing these effects, a repeated ECS regimen resulted in impaired fear learning-memory, increased fatigue, increased hippocampal Iba-1 expression, and decreased hippocampal ChAT expression. As such, the current model does not provide insights into the

  8. Performance Evaluation of Advanced Retrofit Roof Technologies Using Field-Test Data Phase Three Final Report, Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    Biswas, Kaushik [ORNL; Childs, Phillip W [ORNL; Atchley, Jerald Allen [ORNL

    2014-05-01

    This article presents various metal roof configurations that were tested at Oak Ridge National Laboratory in Tennessee, U.S.A. between 2009 and 2013, and describes their potential for reducing the attic-generated space conditioning loads. These roofs contained different combinations of phase change material, rigid insulation, low emittance surface and above-sheathing ventilation, with standing-seam metal panels on top. These roofs were designed to be installed on existing roofs decks, or on top of asphalt shingles for retrofit construction. All the tested roofs showed the potential for substantial energy savings compared to an asphalt shingle roof, which was used as a control for comparison. The roofs were constructed on a series of adjacent attics separated at the gables using thick foam insulation. The attics were built on top of a conditioned room. All attics were vented at the soffit and ridge. The test roofs and attics were instrumented with an array of thermocouples. Heat flux transducers were installed in the roof deck and attic floor (ceiling) to measure the heat flows through the roof and between the attic and conditioned space below. Temperature and heat flux data were collected during the heating, cooling and swing seasons over a 3 year period. Data from previous years of testing have been published. Here, data from the latest roof configurations being tested in year 3 of the project are presented. All test roofs were highly effective in reducing the heat flows through the roof and ceiling, and in reducing the diurnal attic temperature fluctuations.

  9. The integration of Mathematics, Science and Technology in early childhood education and the foundation phase: The role of the formation of the professional identities of beginner teachers

    Directory of Open Access Journals (Sweden)

    Marie Botha

    2015-02-01

    Full Text Available This article focuses on the professional identity formation of six beginner teachers (three in early childhood education and three in the foundation phase, involved in the teaching of Mathematics, Science and Technology (MST. Attention is in particular being paid to the role of professional identity in how they applied innovative teaching methods such as enquiry-based teaching. The study is based on the personal narratives of the six teachers, regarding their own learning experiences in MST, the impact of their professional training at an institution of higher education, as well as their first experiences as MST teachers in the workplace. A qualitative research design was applied and data was obtained through visual (photo collages and written stories, observation and interviews. Whilst all the teachers held negative attitudes towards Mathematics, this situation was turned around during their university training. The three teachers in early childhood education experienced their entrance to the profession as positive, due mainly to the support of colleagues in their application of innovative teaching methods. Two teachers in the foundation phase, however, experienced the opposite. The findings emphasise the complex processes in the moulding of a professional teacher identity and how teaching practices are influenced by these processes.

  10. Introducción del sistema europeo de transferencia de créditos (ECTS en la Facultad de Medicina de La Laguna Introduction of the European Credit Transfer System (ECTS in the medical school of the University of La Laguna

    Directory of Open Access Journals (Sweden)

    Eduardo Doménech Martínez

    2007-03-01

    Full Text Available Para la convergencia europea se deben modificar los planes de estudios de las facultades de medicina de forma que el Sistema de Transferencia de Créditos Europeo (ECTS esté incorporado a los nuevos planes del estudio antes del 2010. Objetivos: Experimentar la introducción del ECTS en el segundo cuatrimestre de quinto curso, modificando la metodología docente. Diseño del estudio: Se adaptaron los programas teóricos y prácticos y se establecieron unos objetivos docentes y un sistema de evaluación para las asignaturas de Patología Médica de la Sangre y de la Hematopoyesis, de las Enfermedades Infecciosas y del Sistema Endocrino y Nutrición, Pediatría y Patología Quirúrgica de Cara, Cuello, Mama y Glándulas Endocrinas. Se realizaron encuestas a los alumnos en el transcurso de cuatrimestre, utilizando para las respuestas una escala de tipo Likert con cinco grados. Se analizó la priorización de las competencias genéricas y específicas de los alumnos. Para el análisis de los resultados se aplicaron pruebas no paramétricas. Resultados: Los 37 créditos actuales se transformaron en 29.5 ECTS, con 736.5 horas de trabajo para los alumnos. Se redujeron los programas teóricos de 186 lecciones en total a 134 (reducción del 27.96 %. Los alumnos prepararon y presentaron 58 casos clínicos bajo la supervisión de sus tutores. Los profesores consideraron que el aprendizaje teórico había sido similar al de cursos anteriores (66.6 % y el práctico había sido mejor (73.3 %. El 73.3 % de los alumnos contestaron que el proyecto debía mejorarse, mediante la reducción de la carga de trabajo de los alumnos y mejora del sistema de evaluación. Los alumnos apreciaron de forma estadísticamente significativa que mejoró la docencia práctica y su capacidad para preparar y presentar casos clínicos. El rendimiento académico de los alumnos fue significativamente mejor que el de los alumnos del curso anterior. Los estudiantes estuvieron de acuerdo

  11. Two-Phase Reactive Transport Model CO2-Brine at Hontomín Technological Development Plant (Burgos)

    International Nuclear Information System (INIS)

    Rodrigo-Naharro, J.; Recreo-Jiménez, F.

    2015-01-01

    The option of storing CO2 in carbonate formations is a minority in the literature on CO2 Deep Geological Storage (CO2-DGS). However, there is sufficient bibliography on systems where CO2 natural accumulations have remained for centuries in carbonate formations (e.g. McElmo Dome, USA), as well as projects related to the enhanced oil recovery (Weyburn Project, Canada). Both cases can represent natural or industrial analogues of a CO2-DGS. The Technological Development Plant (TDP) at Hontomín (Burgos) was initially designed to inject supercritical CO2 or dissolved CO2 in a Lower Jurassic limestone-dolomite formation of the Burgos Platform, at 1500 m depth approximately. The Dogger Aquifer in the Paris Basin, together with the overlying Albian aquifer, is one of these potential analogues of the Underground Structure of Hontomín due to their stratigraphic, lithological and hydrogeological similarities. However, the drilling of the wells HI (injection) and HA (auscultation) in the TDP at Hontomín in 2014, which have allowed to access to the storage and seal formations, as well as the petrophysical measurements performed by CIUDEN and Fundación Instituto Petrofísico on core samples from both wells, and the hydraulic tests for the dynamic reservoir characterisation, have advised to include the more permeable formation levels of the Norian-Rhaetian “carniolas” in the initially selected storage formation. This formation is located at the bottom of the Sopeña dolomitic Fm., at a depth of 1595-1605 m in the well HI. The existence of sulphates (anhydrite and gypsum) in these levels introduces lithological and geochemical features not present in the Dogger aquifer of the Paris Basin which, in turn, advises to consider the lessons learned from the Weyburn Project. In this report a study of the system CO2–brine–storage rock, close to the well HI, is presented, where the deep aquifer of the Underground Structure of Hontomín could be affected in the chemical

  12. Innovation in clean coal technologies. Empirical evidence from firm-level patent data

    Energy Technology Data Exchange (ETDEWEB)

    Kruse, Juergen [Koeln Univ. (Germany). Dept. of Economics; Koeln Univ. (Germany). Energiewirtschaftliches Inst.; Wetzel, Heike [Kassel Univ. (Germany). Inst. of Economics

    2016-02-15

    This article empirically analyzes supply-side and demand-side factors expected to a.ect innovation in clean coal technologies. Patent data from 93 national and international patent offices is used to construct new firm-level panel data on 3,648 clean coal innovators over the time period 1978 to 2009. The results indicate that on the supply-side a firm¡¯s history in clean coal patenting and overall propensity to patent positively a.ects clean coal innovation. On the demand-side we find strong evidence that environmental regulation of emissions, that is CO{sub 2}, NO{sub X} and SO{sub 2}, induces innovation in both efficiency improving combustion and after pollution control technologies.

  13. Vapor Compressor Driven Hybrid Two-Phase Loop, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — This Small Business Innovation Research Phase I project will demonstrate a vapor compressor driven hybrid two-phase loop technology. The hybrid two-phase loop...

  14. System technology analysis of aeroassisted orbital transfer vehicles: Moderate lift/drag (0.75-1.5). Volume 3: Cost estimates and work breakdown structure/dictionary, phase 1 and 2

    Science.gov (United States)

    1985-01-01

    Technology payoffs of representative ground based (Phase 1) and space based (Phase 2) mid lift/drag ratio aeroassisted orbit transfer vehicles (AOTV) were assessed and prioritized. A narrative summary of the cost estimates and work breakdown structure/dictionary for both study phases is presented. Costs were estimated using the Grumman Space Programs Algorithm for Cost Estimating (SPACE) computer program and results are given for four AOTV configurations. The work breakdown structure follows the standard of the joint government/industry Space Systems Cost Analysis Group (SSCAG). A table is provided which shows cost estimates for each work breakdown structure element.

  15. Gravidez ectópica cervical com embrião vivo: relato de quatro casos Cervical pregnancy with live embryo: a report of four cases

    Directory of Open Access Journals (Sweden)

    Julio Elito Junior

    1999-07-01

    Full Text Available Objetivo: avaliar a eficácia e segurança do tratamento da gravidez ectópica cervical com embrião vivo com a injeção intra-amniótica de metotrexato (MTX. Métodos: quatro pacientes fizeram parte do estudo. O diagnóstico foi efetuado pelo exame clínico e confirmado pela ultra-sonografia, na qual foi visualizado saco gestacional com embrião vivo em topografia do colo uterino. As pacientes foram submetidas a punção do saco gestacional guiada pela ultra-sonografia, tendo sido aspirado o seu conteúdo e injetado metotrexato (1 mg/kg. O controle foi realizado com dosagens seriadas de beta-hCG nos dias 1, 4 e 7 após a injeção e semanalmente até negativação dos títulos. Resultados: os quatro casos foram tratados com sucesso. O tempo necessário para regressão dos níveis de beta-hCG a valores pré-gravídicos foi de: 60 dias (caso 1, 74 dias (caso 2, 28 dias (caso 3 e 10 dias (caso 4. Conclusão: a injeção intra-amniótica de MTX é uma alternativa do tratamento da gravidez ectópica cervical com embrião vivo, pois evita a cirurgia e preserva a fertilidade.Purpose: to evaluate safety and efficacy of intra-amniotic injection of methotrexate (MTX for treatment of viable cervical pregnancy. Methods: four women with viable cervical pregnancy confirmed by ultrasound (US were treated with transvaginal injection of MTX (1 mg/kg under sonographic control. The follow-up was made with serial dosages of beta-hCG on days 1, 4 and 7 after injection and weekly until the titers were negative. Results: the patients were treated with success. The time for the titers of beta-hCG to become negative after the treatment was: 62 days (case 1, 84 days (case 2, 28 days (case 3 and 10 days (case 4. Conclusion: intra-amniotic injection of MTX can be used to avoid surgery in cases of viable cervical pregnancy.

  16. SU-G-IeP4-08: Initial Investigations of Up-Converting Nanoparticles (UCNP) for 3D Tissue Imaging in Optical-ECT

    International Nuclear Information System (INIS)

    Yoon, S; Dewhirst, M; Oldham, M; Langloss, B; Boss, M; Birer, S

    2016-01-01

    Purpose: Near-IR absorptive up-converting nanoparticles (UCNPs) is a novel contrast for optical-ECT that allows auto-fluorescence-free 3D imaging of labeled cells in a matrix of large (∼1cm 3 ) unsectioned normal tissue. This has the potential to image small metastases or dormant cells that is difficult with down-converting fluorescing dyes due to auto-fluorescence. The feasibility of imaging UCNP in agarose phantoms and a mouse lung is demonstrated, aided by a 3D-printed optical-ECT stage designed to excite UCNP in a mouse lung. Methods: The UCNP, NaYF 4 :Yb/Er (20/2%), studied in this work up-converts 980nm light to visible light peaking sharply at ∼540nm. To characterize the UCNP emission as a function of UCNP concentration, cylindrical 2.5%wt agarose phantoms infused with UCNP at concentrations of 25µg/mL and 50µg/mL were exposed to 1.5W 980nm laser coupled to an optical fiber. The fiber was held stably at 1cm above the stage via a custom 3D-printed stage. An optically cleared lung harvested from a BALBc mice was then injected with 100µL of 1mg/mL UCNP solution ex vivo. Tomographic imaging of the UCNP emission in lung was performed. Results: The laser beam tract is visualized within the agarose phantom. A line profile of UCNP emission at 25µg/mL versus 50µg/mL shows that increasing the UCNP concentration increases emission count. UCNPs injected into a cleared mouse lung disperse throughout the respiratory tract, allowing for visualization and 3D reconstruction. Excitation before and after UCNP injection shows the tissue exhibits no auto-fluorescence at 980nm, allowing clear view of the UCNP without any obscuring features such as conventional down-converting fluorescent tags. Conclusion: We confirm that up-conversion in tissue circumvents completely tissue auto-fluorescence, which allowed background-free 3D reconstruction of the UCNP distribution. We also confirm that raising the UCNP concentration increases emission and that UCNPs are retained in

  17. Equilibrium phase experimental determination of petroleum + gas systems at supercritical condition using ultrasonic technology; Estudo experimental do equilibrio de fases de sistemas de fracoes de petroleo e gases em condicoes supercriticas utilizando tecnicas de ultra-som: aparato experimental

    Energy Technology Data Exchange (ETDEWEB)

    Mehl, Ana; Pessoa, Fernando L.P.; Silva, Silvia M.C. da [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola de Quimica; Feiteira, Jose F. [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil). Escola de Engenharia

    2008-07-01

    In separation process of multicomponent systems based on phase equilibrium is essential know the phase behavior and the critical points of the system for determination and optimization of the operational conditions. The experimental apparatus presents the challenge of determine the equilibrium phase dates of a system composed by petroleum residua and supercritical solvent. The used method, named acoustic method, allows the composition identification of the phases in equilibrium also in cloudy systems as they are the systems formed by residues of crude oil. For this reason, the acoustic methodology, based on the ultra-sound technology will be used in the study of the phase equilibrium and experimental characterization of the system, in benches scale, operating in severe conditions of temperature and pressure.The acoustic method is one not invasive and not subjective technique, what becomes the work in high pressures safer. (author)

  18. Novel multi-source phase-controlled radiofrequency technology for non-ablative and micro-ablative treatment of wrinkles, lax skin and acne scars

    Science.gov (United States)

    Elman, Monica; Harth, Yoram

    2011-01-01

    The basic properties of lasers and pulsed light sources limit their ability to deliver high energy to the dermis and subcutaneous tissues without excessive damage to the epidermis. Radiofrequency was shown to penetrate deeper than optical light sources independent of skin color. The early RF-based devices used single source bipolar RF, which is safe but limited in use due to the superficial flow of energy between the two bipolar electrodes. Another type of single source RF employs a single electrode (monopolar) in which the RF energy flows from one electrode on the surface of the skin through the entire body to a plate under the body. Although more effective than bipolar, this devices require intense active cooling of the skin and may be associated with considerable pain and other systemic and local safety concerns. Latest generation of RF technology developed by EndyMed Medical Ltd. (Caesarea, Israel) utilizes simultaneously six or more phase controlled RF generators (3DEEP technology). The multiple electrical fields created by the multiple sources “repel” or “attract” each other, leading to the precise 3 dimensional delivery of RF energy to the dermal and sub-dermal targets minimizing the energy flow through the epidermis without the need for active cooling. Confocal microscopy of the skin has shown that 6 treatment sessions of Multisource RF technology improve skin structure features. The skin after treatment had longer and narrower dermal papilla and denser and finer collagen fiber typical to younger skin as compared to pre treatment skin. Ultrasound of the skin showed after 6 treatment sessions reduction of 10 percent in the thickness of the subcutaneous fat layer. Non ablative facial clinical studies showed a significant reduction of wrinkles after treatment further reduced at 3 months follow-up. Body treatment studies showed a circumference reduction of 2.9 cm immediately after 6 treatments, and 2 cm at 12 months after the end of treatment, proving

  19. Phased Construction Completion Report for Bldg. K-1401 of the Remaining Facilities Demolition Project at the East Tennessee Technology Park, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    Bechtel Jacobs

    2008-10-01

    This Phased Construction Completion Report documents the demolition of Bldg. K-1401, Maintenance Building, addressed in the Action Memorandum for the Remaining Facilities Demolition Project at East Tennessee Technology Park, Oak Ridge, Tennessee (DOE 2003a) as a Comprehensive Environmental Response, Compensation, and Liability Act of 1980 non-time-critical removal action. The objectives of the removal action (DOE 2003a) - to eliminate the source of potential contamination, to eliminate the threat of potential future releases, and/or to eliminate the threats to the general public and the environment - were met. The end state of this action is for the slab to remain with all penetrations sealed and grouted or backfilled. The basement and pits remain open. There is residual radiological and polychlorinated biphenyl contamination on the slab and basement. A fixative was applied to the area on the pad contaminated with polychlorinated biphenyls. Interim land-use controls will be maintained until final remediation decisions are made under the Zone 2 Record of Decision (DOE 2005a).

  20. A Microfabricated Segmented-Involute-Foil Regenerator for Enhancing Reliability and Performance of Stirling Engines. Phase III Final Report for the Radioisotope Power Conversion Technology NRA

    Science.gov (United States)

    Ibrahim, Mounir B.; Gedeon, David; Wood, Gary; McLean, Jeffrey

    2009-01-01

    Under Phase III of NASA Research Announcement contract NAS3-03124, a prototype nickel segmented-involute-foil regenerator was microfabricated and tested in a Sunpower Frequency-Test-Bed (FTB) Stirling convertor. The team for this effort consisted of Cleveland State University, Gedeon Associates, Sunpower Inc. and International Mezzo Technologies. Testing in the FTB convertor produced about the same efficiency as testing with the original random-fiber regenerator. But the high thermal conductivity of the prototype nickel regenerator was responsible for a significant performance degradation. An efficiency improvement (by a 1.04 factor, according to computer predictions) could have been achieved if the regenerator was made from a low-conductivity material. Also, the FTB convertor was not reoptimized to take full advantage of the microfabricated regenerator s low flow resistance; thus, the efficiency would likely have been even higher had the FTB been completely reoptimized. This report discusses the regenerator microfabrication process, testing of the regenerator in the Stirling FTB convertor, and the supporting analysis. Results of the pre-test computational fluid dynamics (CFD) modeling of the effects of the regenerator-test-configuration diffusers (located at each end of the regenerator) are included. The report also includes recommendations for further development of involute-foil regenerators from a higher-temperature material than nickel.

  1. Phased Construction Completion Report for Building K-1401 of the Remaining Facilities Demolition Project at the East Tennessee Technology Park Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    Garland S.

    2008-03-01

    This Phased Construction Completion Report documents the demolition of Bldg. K-1401, Maintenance Building, addressed in the Action Memorandum for the Remaining Facilities Demolition Project at East Tennessee Technology Park, Oak Ridge, Tennessee (DOE 2003a) as a Comprehensive Environmental Response, Compensation, and Liability Act of 1980 non-time-critical removal action. The objectives of the removal action (DOE 2003a) - to eliminate the source of potential contamination, to eliminate the threat of potential future releases, and/or to eliminate the threats to the general public and the environment - were met. The end state of this action is for the slab to remain with all penetrations sealed and grouted or backfilled. The basement and pits remain open. There is residual radiological and polychlorinated biphenyl contamination on the slab and basement. A fixative was applied to the area on the pad contaminated with polychlorinated biphenyls. Interim land-use controls will be maintained until final remediation decisions are made under the Zone 2 Record of Decision (DOE 2005a).

  2. Technology Support for High-Throughput Processing of Thin-Film CdTe PV Modules Annual Technical Report, Phase II

    Energy Technology Data Exchange (ETDEWEB)

    Rose, D.H.; Powell, R.C.; Karpov, V.; Grecu, D.; Jayamaha, U.; Dorer, G.L. (First Solar, L.L.C.)

    2001-02-05

    Results and conclusions from Phase II of a three-year subcontract are presented. The subcontract, entitled Technology Support for High-Throughput Processing of Thin-Film CdTe PV Modules, is First Solar's portion of the Thin-Film Photovoltaic Partnership Program. The research effort of this subcontract is divided into four areas of effort: (1) process and equipment development, (2) efficiency improvement, (3) characterization and analysis, and (4) environmental, health, and safety. As part of the process and equipment development effort, a new semiconductor deposition system with a throughput of 3 m2/min was completed, and a production line in a new 75,000 ft2 facility was started and is near completion. As part of the efficiency-improvement task, research was done on cells and modules with thin CdS and buffer layers as way to increase photocurrent with no loss in the other photovoltaic characteristics. A number of activities were part of the characterization and analysis task, including developing a new admittance spectroscopy system, with a range of 0.001 Hz to 100 kHz, to characterize cells. As part of the environmental, health, and safety task, the methanol-based CdCl2 process was replaced with aqueous-CdCl2. This change enabled the retention of a De Minimus level of emissions for the manufacturing plant, so no permitting is required.

  3. The mineral phase evolution behaviour in the production of glass-ceramics from municipal solid waste incineration fly ash by melting technology.

    Science.gov (United States)

    Luan, Jingde; Chai, Meiyun; Li, Rundong; Yao, Pengfei; Khan, Agha Saood

    2016-01-01

    High energy consumption was the major obstacle to the widespread application of melting technology in the treatment of municipal solid waste incineration fly ash. Aiming to lower the ash-melting temperature (AMT) for energy-saving, differential scanning calorimetry, X-ray diffraction and the scanning electron microscope were used to investigate the relations between AMT and the mineral evolution. The results indicated that the change of AMT was determined by the types and the contents of mineral crystals. The transition from refractory minerals to fluxing minerals was the key. The transition of the main crystalline phase from pseudowollastonite (Ca3(Si3O9)) to wollastonite (CaSiO3) played a significant role in AMT reduction. A quantum chemistry calculation was carried out to investigate the effect of crystal reaction activity on AMT. In the chemical reaction, the highest occupied molecular orbital and the lowest unoccupied molecular orbital played a more important role than any other orbits. Cations (Ca(2+), Mg(2+), Na(+), K(+)) were apt to enter into the crystal lattice of wollastonite and gehlenite mainly through Si (3), O (1), Si (6), O (10) and Al (2), O (10), and broke the covalent bonds of Si (3)-O (7), Al (1)-O (9) and Al (1)-O (15), respectively. This deconstruction behaviour provided convenient conditions for restructuring and promoted the formation of fluxing minerals. In melts, the excess SiO2 monomers which existed in the form of cristobalite and quartz caused AMT increase.

  4. Bond and electron beam welding quality control of the aluminum stabilized and reinforced CMS conductor by means of ultrasonic phased-array technology

    CERN Document Server

    Neuenschwander, J; Horváth, I L; Luthi, T; Marti, H

    2002-01-01

    The Compact Muon Solenoid (CMS) is one of the general-purpose detectors to be provided for the LHC project at CERN. The design field of the CMS superconducting magnet is 4 T, the magnetic length is 12.5 m and the free bore is 6 m. The coils for CNIS are wound of aluminum-stabilized Rutherford type superconductors reinforced with high-strength aluminum alloy. For optimum performance of the conductor a void-free metallic bonding between the high-purity aluminum and the Rutherford type cable as well as between the electron beam welded reinforcement and the high-purity aluminum must be guaranteed. It is the main task of this development work to assess continuously the bond quality over the whole width and the total length of the conductors during manufacture. To achieve this goal we use the ultrasonic phased-array technology. The application of multi- element transducers allows an electronic scanning perpendicular to the direction of production. Such a testing is sufficiently fast in order to allow a continuous a...

  5. TASK TECHNICAL AND QUALITY ASSURANCE PLAN FOR OUT-OF-TANK DESTRUCTION OF TETRAPHENYLBORATE VIA WET AIR OXIDATION TECHNOLOGY: PHASE I - BENCH SCALE TESTS

    Energy Technology Data Exchange (ETDEWEB)

    Adu-Wusu, K

    2006-03-31

    Tank 48H return to service is critical to the processing of high level waste (HLW) at Savannah River Site (SRS). Liquid Waste Disposition (LWD) management has the goal of returning Tank 48H to routine service by January 2010 or as soon as practical. Tank 48H currently holds legacy material containing organic tetraphenylborate (TPB) compounds from the operation of the In-Tank Precipitation process. This material is not compatible with the waste treatment facilities at SRS and must be removed or undergo treatment to destroy the organic compounds before the tank can be returned to Tank Farm service. Tank 48H currently contains {approx}240,000 gallons of alkaline slurry with about 2 wt % potassium and cesium tetraphenylborate (KTPB and CsTPB). The main radioactive component in Tank 48H is {sup 137}Cs. The waste also contains {approx}0.15 wt % Monosodium Titanate (MST) which has adsorbed {sup 90}Sr, U, and Pu isotopes. A System Engineering Evaluation of technologies/ideas for the treatment of TPB identified Wet Air Oxidation (WAO) as a leading alternative technology to the baseline aggregation approach. Over 75 technologies/ideas were evaluated overall. Forty-one technologies/ideas passed the initial screening evaluation. The 41 technologies/ideas were then combined to 16 complete solutions for the disposition of TPB and evaluated in detail. Wet Air Oxidation (WAO) is an aqueous phase process in which soluble or suspended waste components are oxidized using molecular oxygen contained in air. The process operates at elevated temperatures and pressures ranging from 150 to 320 C and 7 to 210 atmospheres, respectively. The products of the reaction are CO{sub 2}, H{sub 2}O, and low molecular weight oxygenated organics (e.g. acetate, oxalate). The basic flow scheme for a typical WAO system is as follows. The waste solution or slurry is pumped through a high-pressure feed pump. An air stream containing sufficient oxygen to meet the oxygen requirements of the waste stream is

  6. Lightweight Gearbox Technology, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Starsys Research has developed a revolutionary new concept for a planetary gearbox that significantly improves the load capacity for any given volume. This concept...

  7. Fault Management Technologies, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — There has been a renewed push across NASA centers and programs to make Systems Engineering (Testability Engineering And Maintenance System). It is our intention to...

  8. Fault Management Technologies, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Given that SysML is becoming a standard for model-based systems engineering and Integration (SE&I), system health management (SHM)-related models will either be...

  9. Lightweight Gearbox Technology, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — To date, the majority of the gearboxes used on the rovers have been based on very conventional materials, process and designs. This has primarily been a result of...

  10. An investigation into the use of a mixture model for simulating the electrical properties of soil with varying effective saturation levels for sub-soil imaging using ECT

    International Nuclear Information System (INIS)

    Hayes, R R; Newill, P A; Podd, F J W; York, T A; Grieve, B D; Dorn, O

    2010-01-01

    A new visualisation tool is being developed for seed breeders, providing on-line data for each individual plant in a screening programme. It will be used to indicate how efficiently each plant utilises the water and nutrients available in the surrounding soil. This will facilitate early detection of desirable genetic traits with the aim of increased efficiency in identification and delivery of tomorrow's drought tolerant food crops. Visualisation takes the form of Electrical Capacitance Tomography (ECT), a non-destructive and non-intrusive imaging technique. Measurements are to be obtained for an individual plant thus allowing water and nutrient absorption levels for an individual specimen to be inferred. This paper presents the inverse problem, discusses the inherent challenges and presents the early experimental results. Two mixture models are evaluated for the prediction of electrical capacitance measurement data for varying effective soil saturation levels using a finite element model implemented in COMSOL Multiphysics. These early studies have given the research team an understanding of the technical challenges that must now be addressed to take the current research into the world of agri-science and food supply.

  11. Using "CONNected objECT (CONNECT)" Algorithm to Explore Intense Global Water Vapor Transport to Investigate Impacts of Climate Variability and Change

    Science.gov (United States)

    Kawzenuk, B.; Sellars, S. L.; Nguyen, P.; Ralph, F. M.; Sorooshian, S.

    2017-12-01

    The CONNected objECT (CONNECT) algorithm is applied to Integrated Water Vapor Transport (IVT) data from the NASA's Modern-Era Retrospective Analysis for Research and Applications - Version 2 reanalysis product for the period 1980 to 2016 to study water vapor transport globally. The algorithm generates life-cycle records as statistical objects for the time and space location of the evolving strong vapor transport events. Global statistics are presented and used to investigate how climate variability impacts the events' location and frequency. Results show distinct water vapor object frequency and seasonal peaks during NH and SH Winter. Moreover, a positive linear trend in the annual number of objects is reported, increasing by 3.58 objects year-over-year (with 95% confidence, +/- 1.39). In addition, we show five distinct regions where these events typically exist (southeastern United States, eastern China, South Pacific south of 25°S, eastern South America and off the southern tip of South Africa), and where they rarely exist (eastern South Pacific Ocean and central southern Atlantic Ocean between 5°N-25°S). In addition, the event frequency and geographical location are also shown to be related to the Arctic Oscillation, Pacific North American Pattern, and the Quasi-Biennial Oscillation.

  12. Challenges in comparing the acute cognitive outcomes of high-frequency repetitive transcranial magnetic stimulation (HF-rTMS) vs. electroconvulsive therapy (ECT) in major depression: A systematic review.

    Science.gov (United States)

    Kedzior, Karina Karolina; Schuchinsky, Maria; Gerkensmeier, Imke; Loo, Colleen

    2017-08-01

    The present study aimed to systematically compare the cognitive outcomes of high-frequency repetitive transcranial magnetic stimulation (HF-rTMS) and electroconvulsive therapy (ECT) in head-to-head studies with major depression (MDD) patients. A systematic literature search identified six studies with 219 MDD patients that were too heterogeneous to reliably detect meaningful differences in acute cognitive outcomes after ECT vs. HF-rTMS. Cognitive effects of brain stimulation vary depending on the timeframe and methods of assessment, stimulation parameters, and maintenance treatment. Thus, acute and longer-term differences in cognitive outcomes both need to be investigated at precisely defined timeframes and with similar instruments assessing comparable functions. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Características clínico-patológicas de las pacientes con diagnóstico de embarazo ectópico en el Hospital Nacional Edgardo Rebagliati Martins entre 1998 y 2002.

    OpenAIRE

    LUGLIO VILLANUEVA, Jesús Mario; DÍAZ LEDESMA, Lizeth; CÁCERES CHU, Eduardo

    2012-01-01

    Objetivos: Determinar las características clínicas y patológicas de las pacientes con diagnóstico de embarazo ectópico en el Hospital Nacional Edgardo Rebagliati Martins (HNERM) entre 1998 y 2002. Material y Métodos: En un estudio descriptivo y retrospectivo se incluyó 203 casos de embarazo ectópico entre enero de 1998 y diciembre del 2002 en el HNERM. Resultados: Se encontró una frecuencia de 0,55%. El mayor porcentaje de pacientes presentó una edad entre 25-39años (89,17%), menarquia entre ...

  14. Fiscal Year 2008 Phased Construction Completion Report for EU Z2-33 in Zone 2, East Tennessee Technology Park, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    Bechtel Jacobs

    2008-09-11

    The Record of Decision for Soil, Buried Waste, and Subsurface Structure Actions in Zone 2, East Tennessee Technology Park, Oak Ridge, Tennessee (DOE/OR/01-2161&D2) (Zone 2 ROD) acknowledged that most of the 800 acres in Zone 2 were contaminated, but that sufficient data to confirm the levels of contamination were lacking. The Zone 2 ROD further specified that a sampling strategy for filling the data gaps would be developed. The Remedial Design Report/Remedial Action Work Plan for Zone 2 Soils, Slabs, and Subsurface Structures, East Tennessee Technology Park, Oak Ridge, Tennessee (DOE/OR/01-2224&D3) (Zone 2 RDR/RAWP) defined the sampling strategy as the Dynamic Verification Strategy (DVS), generally following the approach used for characterization of the Zone 1 exposure units (EUs). The Zone 2 ROD divided the Zone 2 area into seven geographic areas and 44 EUs. To facilitate the data quality objectives (DQOs) of the DVS process, the Zone 2 RDR/RAWP regrouped the 44 EUs into 12 DQO scoping EU groups. These groups facilitated the DQO process by placing similar facilities and their support facilities together and allowing identification of data gaps. The EU groups were no longer pertinent after DQO planning was completed and characterization was conducted as areas became accessible. As the opportunity to complete characterization became available, the planned DVS program and remedial actions (RAs) were completed for EU Z2-33. Remedial action was also performed at two additional areas in adjacent EU Z2-42 because of their close proximity and similar nature to a small surface soil RA in EU Z2-33. Remedial actions for building slabs performed in EU Z2-33 during fiscal year (FY) 2007 were reported in the Fiscal Year 2007 Phased Construction Completion Report for the Zone 2 Soils, Slabs, and Subsurface Structures at East Tennessee Technology Park, Oak Ridge, Tennessee (DOE/OR/01-2723&D1). Recommended RAs for EU Z2-42 were described in the Fiscal Year 2006 Phased Construction

  15. Simulation and Evaluation of ECT Signals From MRPC Probe in Combo Calibration Standard Tube Using Electromagnetic Numerical Analysis

    International Nuclear Information System (INIS)

    Yoo, Joo Young; Song, Sung Jin; Jung, Hee Jun; Kong, Young Bae

    2006-01-01

    Signals captured from a Combo calibration standard tube play a crucial role in the evaluation of motorized rotating pancake coil (MRPC) probe signals from steam generator (SG) tubes in nuclear power plants (NPPs). Therefore, the Combo tube signals should be consistent and accurate. However, MRPC probe signals are very easily affected by various factors around the tubes so that they can be distorted in their amplitudes and phase angles which are the values specifically used in the evaluation. To overcome this problem, in this study, we explored possibility of simulation to be used as a practical calibration tool far the evaluation of real field signals. For this purpose, we investigated the characteristics of a MRPC probe and a Combo tube. And then using commercial software (VIC-3D) we simulated a set of calibration signals and compared to the experimental signals. From this comparison, we verified the accuracy of the simulated signals. Finally, we evaluated two defects using the simulated Combo tube signals, and the results were compared with those obtained using the actual field calibration signals

  16. The implications of megatrends in information and communication technology and transportation for changes in global physical activity.

    Science.gov (United States)

    Pratt, Michael; Sarmiento, Olga L; Montes, Felipe; Ogilvie, David; Marcus, Bess H; Perez, Lilian G; Brownson, Ross C

    2012-07-21

    Physical inactivity accounts for more than 3 million deaths per year, most from non-communicable diseases in low-income and middle-income countries. We used reviews of physical activity interventions and a simulation model to examine how megatrends in information and communication technology and transportation directly and indirectly affect levels of physical activity across countries of low, middle, and high income. The model suggested that the direct and potentiating eff ects of information and communication technology, especially mobile phones, are nearly equal in magnitude to the mean eff ects of planned physical activity interventions. The greatest potential to increase population physical activity might thus be in creation of synergistic policies in sectors outside health including communication and transportation. However, there remains a glaring mismatch between where studies on physical activity interventions are undertaken and where the potential lies in low-income and middle-income countries for population-level effects that will truly affect global health.

  17. Nuclear Science and Engineering education at the Delft University of Technology

    International Nuclear Information System (INIS)

    Bode, P.

    2009-01-01

    There is a national awareness in the Netherlands for strengthening education in the nuclear sciences, because of the ageing workforce, and to ensure competence as acceptability increases of nuclear power as an option for diversification of the energy supply. This may be reflected by the rapidly increasing number of students at the Delft University of Technology with interest in nuclear science oriented courses, and related bachelor and MSc graduation projects. These considerations formed the basis of the Nuclear Science and Engineering concentration, effectively starting in 2009. The programme can be taken as focus of the Research and Development Specialisation within the Master Programme in Applied Physics or as a Specialisation within the Master's Programme in Chemical Engineering. Both programmes require successful completion of a total of 120 ECTS study points, consisting of two academic years of 60 ECTS (1680 hours of study). Of that total, 100 ECTS are in the field of Nuclear Science and Engineering, depending on students choices within the programme, including a (industrial) internship, to be taken in companies all over the world. In Chemical Engineering, there is a compulsory design project during which a product or process should be developed. Both programmes also require a final graduation project. In both curricula, Nuclear Science and Engineering comprises compulsory and elective courses, which allow students to focus on either health or energy. Examples of courses include Nuclear Science, Nuclear Chemistry, Nuclear Engineering, Reactor Physics, Chemistry of the Nuclear Fuel Cycle, Medical Physics and Radiation Technology and Radiological Health Physics. (Author)

  18. Integrated remote sensing and visualization (IRSV) system for transportation infrastructure operations and management, phase two, volume 3 : advanced consideration in LiDAR technology for bridge evaluation.

    Science.gov (United States)

    2012-03-01

    This report describes Phase Two enhancement of terrestrial LiDAR scanning for bridge damage : evaluation that was initially developed in Phase One. Considering the spatial and reflectivity : information contained in LiDAR scans, two detection algorit...

  19. Mouse repeated electroconvulsive seizure (ECS does not reverse social stress effects but does induce behavioral and hippocampal changes relevant to electroconvulsive therapy (ECT side-effects in the treatment of depression.

    Directory of Open Access Journals (Sweden)

    Erin M van Buel

    Full Text Available Electroconvulsive therapy (ECT is an effective treatment for depression, but can have negative side effects including amnesia. The mechanisms of action underlying both the antidepressant and side effects of ECT are not well understood. An equivalent manipulation that is conducted in experimental animals is electroconvulsive seizure (ECS. Rodent studies have provided valuable insights into potential mechanisms underlying the antidepressant and side effects of ECT. However, relatively few studies have investigated the effects of ECS in animal models with a depression-relevant manipulation such as chronic stress. In the present study, mice were first exposed to chronic social stress (CSS or a control procedure for 15 days followed by ECS or a sham procedure for 10 days. Behavioral effects were investigated using an auditory fear conditioning (learning and expression (memory test and a treadmill-running fatigue test. Thereafter, immunohistochemistry was conducted on brain material using the microglial marker Iba-1 and the cholinergic fibre marker ChAT. CSS did not increase fear learning and memory in the present experimental design; in both the control and CSS mice ECS reduced fear learning and fear memory expression. CSS induced the expected fatigue-like effect in the treadmill-running test; ECS induced increased fatigue in CSS and control mice. In CSS and control mice ECS induced inflammation in hippocampus in terms of increased expression of Iba-1 in radiatum of CA1 and CA3. CSS and ECS both reduced acetylcholine function in hippocampus as indicated by decreased expression of ChAT in several hippocampal sub-regions. Therefore, CSS increased fatigue and reduced hippocampal ChAT activity and, rather than reversing these effects, a repeated ECS regimen resulted in impaired fear learning-memory, increased fatigue, increased hippocampal Iba-1 expression, and decreased hippocampal ChAT expression. As such, the current model does not provide insights

  20. Headspace solid-phase microextraction (HS-SPME) combined with GC-MS as a process analytical technology (PAT) tool for monitoring the cultivation of C. tetani.

    Science.gov (United States)

    Ghader, Masoud; Shokoufi, Nader; Es-Haghi, Ali; Kargosha, Kazem

    2018-02-06

    Vaccine production is a biological process in which variation in time and output is inevitable. Thus, the application of Process Analytical Technologies (PAT) will be important in this regard. Headspace solid - phase microextraction (HS-SPME) coupled with GC-MS can be used as a PAT for process monitoring. This method is suitable to chemical profiling of volatile organic compounds (VOCs) emitted from microorganisms. Tetanus is a lethal disease caused by Clostridium tetani (C. tetani) bacterium and vaccination is an ultimate way to prevent this disease. In this paper, SPME fiber was used for the investigation of VOCs emerging from C. tetani during cultivation. Different types of VOCs such as sulfur-containing compounds were identified and some of them were selected as biomarkers for bioreactor monitoring during vaccine production. In the second step, the portable dynamic air sampling (PDAS) device was used as an interface for sampling VOCs by SPME fibers. The sampling procedure was optimized by face-centered central composite design (FC-CCD). The optimized sampling time and inlet gas flow rates were 10 min and 2 m L s -1 , respectively. PDAS was mounted in exhausted gas line of bioreactor and 42 samples of VOCs were prepared by SPME fibers in 7 days during incubation. Simultaneously, pH and optical density (OD) were evaluated to cultivation process which showed good correlations with the identified VOCs (>80%). This method could be used for VOCs sampling from off-gas of a bioreactor to monitoring of the cultivation process. Copyright © 2018. Published by Elsevier B.V.

  1. Scenario-Based Performance Observation Tool for Learning in Team Environments Aerospace Crew-Centered Technologies (SPOTLITE-ACT), Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The insertion of new technology in the cockpit, especially "smart" technology designed to become an additional crewmember, will necessarily impact flight-related...

  2. Divison of Environmental Control Technology program, 1978

    International Nuclear Information System (INIS)

    1979-06-01

    This report covers Division of Environmental Control Technology projects in progress during FY 1978, within the Office of the Assistant Secretary for Environment, Department of Energy. It is the second in a planned series of annual reports. The Division of Environmental Control Technology (ECT) continues to support the Assistant Secretary for Environment (EV) in discharging two primary responsibilities: (1) under the Environmental Engineering (EE) Program, the independent overview and assessment of environmental control aspects of both the U.S. Department of Energy's (DOE) research, development, and demonstration (RD and D) programs and the Nation's energy policies, and (2) under the Decontamination and Decommissioning Program, the reduction of potential environmental hazards at the radioactively contaminated sites that are presently owned or were formerly used by the Government. This report presents a short summary of objectives, approach, progress and results, future plans, and a reference bibliography for each research, development, or assessment project within the program areas described above

  3. Fiscal Year 2007 Phased Construction Completion Report for the Zone 2 Soils, Slabs, and Subsurface Structures at East Tennessee Technology Park, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    RSI

    2008-03-01

    The purpose of this Phased Construction Completion Report (PCCR) is to present the fiscal year (FY) 2007 results of characterization activities and recommended remedial actions (RAs) for 11 exposure units (EUs) in Zone 2 (Z2-01, Z2-03, Z2-08, Z2-23, Z2-24, Z2-28, Z2-34, Z2-37, Z2-41, Z2-43, and Z2-44) at the East Tennessee Technology Park (ETTP), which is located in the northwest corner of the U.S. Department of Energy (DOE) Oak Ridge Reservation in Oak Ridge, Tennessee (Fig. 1). ETTP encompasses a total land area of approximately 5000 acres that has been subdivided into three zones--Zone 1 ({approx}1400 acres), Zone 2 ({approx}800 acres), and the Boundary Area ({approx}2800 acres). Zone 2, which encompasses the highly industrialized portion of ETTP shown in Fig. 1, consists of all formerly secured areas of the facility, including the large processing buildings and direct support facilities; experimental laboratories and chemical and materials handling facilities; materials storage and waste disposal facilities; secure document records libraries; and shipping and receiving warehouses. The Zone 2 Record of Decision for Soil, Buried Waste, and Subsurface Structure Actions in Zone 2, East Tennessee Technology Park, Oak Ridge, Tennessee (DOE 2005) (Zone 2 ROD) specifies the future end use for Zone 2 acreage as uncontrolled industrial for the upper 10 ft of soils. Characterization activities in these areas were conducted in compliance with the Zone 2 ROD and the Dynamic Verification Strategy (DVS) and data quality objectives (DQOs) presented in the Remedial Design Report/Remedial Action Work Plan for Zone 2 Soils, Slabs, and Subsurface Structures, East Tennessee Technology Park, Oak Ridge, Tennessee (DOE 2007) (Zone 2 RDR/RAWP). The purpose of this PCCR is to address the following: (1) Document DVS characterization results for the accessible EUs in FY 2007; (2) Describe and document the risk evaluation for each EU, and determine if the EU met the Zone 2 ROD requirements

  4. Una experiencia previa a la implantación del ects en el área de la estadística económico-empresarial

    Directory of Open Access Journals (Sweden)

    Ramírez Hurtado, José Manuel

    2006-01-01

    Full Text Available El Espacio Europeo de Educación Superior (EEES se presenta como el principal reto de los últimos años al que debe enfrentarse la Universidad española. La puesta en marcha de este nuevo marco de acción supone un replanteamiento general de todo lo que se refiere, por un lado, a la estructura de las materias que conformarán las futuras titulaciones y, por otro, a los propios métodos docentes que deberán utilizarse en la impartición y evaluación de dichas materias. Esta comunicación se centra, precisamente, en la experiencia recogida a lo largo de los últimos años sobre estos métodos por parte de los profesores responsables de la docencia de la asignatura de Estadística en la Diplomatura en Ciencias Empresariales de la Universidad Pablo de Olavide, de Sevilla. La implementación de la metodología utilizada es fruto de la puesta en marcha en la Facultad de Ciencias Empresariales, en el curso académico 2002-2003, de un Plan de Mejora de esta titulación. La similitud de lo realizado con el formato del denominado “Eurocrédito” (ECTS puede, sin duda, ser tenida en cuenta para afrontar la próxima docencia de los Grados en el área económico-empresarial bajo dicho formato.

  5. Phased-array radars

    Science.gov (United States)

    Brookner, E.

    1985-02-01

    The operating principles, technology, and applications of phased-array radars are reviewed and illustrated with diagrams and photographs. Consideration is given to the antenna elements, circuitry for time delays, phase shifters, pulse coding and compression, and hybrid radars combining phased arrays with lenses to alter the beam characteristics. The capabilities and typical hardware of phased arrays are shown using the US military systems COBRA DANE and PAVE PAWS as examples.

  6. Energy prices, technological knowledge and green energy innovation. A dynamic panel analysis of patent counts

    International Nuclear Information System (INIS)

    Kruse, Juergen; Wetzel, Heike; Koeln Univ.

    2014-01-01

    We examine the effect of energy prices and technological knowledge on innovation in green energy technologies. In doing so, we consider both demand-pull effects, which induce innovative activity by increasing the expected value of innovations, and technology-push effects, which drive innovative activity by extending the technological capability of an economy. Our analysis is conducted using patent data from the European Patent Office on a panel of 26 OECD countries over the period 1978-2009. Utilizing a dynamic count data model for panel data, we analyze 11 distinct green energy technologies. Our results indicate that the existing knowledge stock is a significant driver of green energy innovation for all technologies. Furthermore, the results suggest that energy prices have a positive impact on innovation for some but not all technologies and that the e.ect of energy prices and technological knowledge on green energy innovation becomes more pronounced after the Kyoto protocol agreement in 1997.

  7. Low-Power, Rad-hard Reconfigurable, Bi-directional Flexfet™ Level Shifter ReBiLS for Multiple Generation Technology Integration for Space Exploration, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — The many different generations of integrated circuit (IC) technologies required for new space exploration systems demand designs operate at multiple and often...

  8. Iterative image reconstruction in ECT

    International Nuclear Information System (INIS)

    Chintu Chen; Ordonez, C.E.; Wernick, M.N.; Aarsvold, J.N.; Gunter, D.L.; Wong, W.H.; Kapp, O.H.; Xiaolong Ouyang; Levenson, M.; Metz, C.E.

    1992-01-01

    A series of preliminary studies has been performed in the authors laboratories to explore the use of a priori information in Bayesian image restoration and reconstruction. One piece of a priori information is the fact that intensities of neighboring pixels tend to be similar if they belong to the same region within which similar tissue characteristics are exhibited. this property of local continuity can be modeled by the use of Gibbs priors, as first suggested by German and Geman. In their investigation, they also included line sites between each pair of neighboring pixels in the Gibbs prior and used discrete binary numbers to indicate the absence or presence of boundaries between regions. These two features of the a priori model permit averaging within boundaries of homogeneous regions to alleviate the degradation caused by Poisson noise. with the use of this Gibbs prior in combination with the technique of stochastic relaxation, German and Geman demonstrated that noise levels can be reduced significantly in 2-D image restoration. They have developed a Bayesian method that utilizes a Gibbs prior to describe the spatial correlation of neighboring regions and takes into account the effect of limited spatial resolution as well. The statistical framework of the proposed approach is based on the data augmentation scheme suggested by Tanner and Wong. Briefly outlined here, this Bayesian method is based on Geman and Geman's approach

  9. Research and development of basic technologies for next-generation industry. Evaluation of 1st-phase research and development of 3-dimensional circuit devices; Jisedai sangyo kiban gijutsu kenkyu kaihatsu. Sanjigen kairo soshi daiikki kenkyu kaihatsu hyoka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1985-03-30

    The aim is to develop basic technologies relating to 3-dimensional circuit devices with an ultrahigh-density accumulation of functions therein for the embodiment of ultra-small high-performance data processing devices or artificial brain-like multiple-function data processing devices. To be developed are laminate-structure devices which have an ultrahigh-density accumulation of logic and memory functions or a complex accumulation of functions including signal and sensor functions. In the 1st phase, importance is attached to the development of a multilayer crystalline structure, which is the most elementary in the development of 3-dimensional circuit devices, and of processing technologies for them. Propositions are made and analyses are conducted relating to the enlargement of exposure region in synchrotron radiation lithography, development of a maskless beam process of a resolution of 0.1{mu}m, development of a focused ion beam device, etc. Recrystallization methods using a laser beam or a linear electron beam are developed for the growth of multilayer crystals, and are proved to be effective. The application feasibility of a flat deposition dry process etc. to laminate processing technologies is demonstrated. Concerning integration technologies, some laminated circuit devices are experimentally fabricated, and their behavior is determined. The goals of the 1st phase are found achieved. (NEDO)

  10. Características clínico-patológicas de las pacientes con diagnóstico de embarazo ectópico en el Hospital Nacional Edgardo Rebagliati Martins entre 1998 y 2002

    Directory of Open Access Journals (Sweden)

    Jesús Mario Luglio Villanueva

    2005-01-01

    Full Text Available Objetivos: Determinar las características clínicas y patológicas de las pacientes con diagnóstico de embarazo ectópico en el Hospital Nacional Edgardo Rebagliati Martins (HNERM entre 1998 y 2002. Material y Métodos: En un estudio descriptivo y retrospectivo se incluyó 203 casos de embarazo ectópico entre enero de 1998 y diciembre del 2002 en el HNERM. Resultados: Se encontró una frecuencia de 0,55%. El mayor porcentaje de pacientes presentó una edad entre 25-39años (89,17%, menarquia entre 9-13años (66,50%, edad gestacional entre 6-8sem (48,77%. La cirugía abdomino-pélvica fue el antecedente más frecuente en 102 (50,24% pacientes y el método anticonceptivo más usado fue el DIU en 45 (22,16% pacientes. El método de ayuda diagnóstica más usado fue la ecografía en 201 (99,01% pacientes seguido por ²HCG en 104 (51,23% pacientes. Se registraron 197 (97,04% embarazos tubáricos: 47,72% ampulares, 29,44% ítsmicos, 7,11% intersticiales, 4,06% fímbricos y en 11,67% casos no se preciso su localización. Se registraron 6 (2,96% embarazos extratubáricos: 3 (1,48% casos a nivel ovárico, 2 (0,99% casos a nivel cervical y 1 (0,49% caso abdominal. Conclusión: La frecuencia del embarazo ectópico fue 0,55%.

  11. Gravidez ectópica após uso de contracepção de emergência: relato de caso Ectopic pregnancy after use of hormonal emergency contraception: a case report

    Directory of Open Access Journals (Sweden)

    Renato Monteiro Zucchi

    2004-10-01

    Full Text Available Gravidez ectópica é a implantação e o desenvolvimento do ovo fora da cavidade uterina; impõe diagnóstico precoce e assistência de urgência. Gravidez ectópica com corpo lúteo contralateral presume ocorrência de transmigração do zigoto para a tuba uterina do lado oposto, o que pode ser responsável pela sua ocorrência. Em 1994, o levonorgestrel teve sua eficácia comprovada como superior à dos outros métodos para contracepção de emergência. É relatado caso de paciente de 27 anos que apresentou gravidez ectópica, de localização tubária, com corpo lúteo contralateral, após uso de contracepção de emergência por falha do método anticoncepcional de escolha (preservativo masculino. Foi realizado tratamento cirúrgico conservador por videolaparoscopia, com boa evolução após a cirurgia.Ectopic pregnancy is the implantation and development of the ovum outside the uterine cavity; it needs a quick diagnosis and an urgent treatment. The presence of the corpus luteum in the ovary that is contralateral to the ectopic pregnancy is presumptive evidence for ovum transmigration, which may be the cause of ectopic pregnancy. In 1994, a multinational clinical trial proved the superiority of levonorgestrel over the existing emergency contraceptive products. In the present study, we describe the case of a 27-year-old woman with ectopic pregnancy and a contralateral corpus luteum after use of hormonal emergency contraception (levonorgestrel, because of failure of the used contraception method (condom. The patient was treated with laparoscopic surgery that was successful.

  12. Efectividad y seguridad de la laparotomía vs laparoscopía en abdomen agudo de origen gineco-obstétrico causado por embarazo ectópico roto y quiste de ovario roto.

    OpenAIRE

    Luna Aveiga, Cristhian

    2014-01-01

    Comparar efectividad, tiempo y sangrado operatorio, estadía y complicaciones entre laparotomía y laparoscopía en abdomen agudo (AA) por embarazo ectópico roto (EER) y quiste de ovario roto (QOR). Métodos: Estudio retrospectivo en el Hospital de Santa Elena y Clínica Granados de Enero 2010-Diciembre 2011. Se obtuvieron las causas, procedimientos, edad, hemoglobina, edad gestacional, antecedentes personales y complicaciones. Tiempo, sangrado operatorio y estadía fueron comparadas por T de stud...

  13. Synthesis of TiO2 Nanoparticles from Ilmenite Through the Mechanism of Vapor-Phase Reaction Process by Thermal Plasma Technology

    Science.gov (United States)

    Samal, Sneha

    2017-11-01

    Synthesis of nanoparticles of TiO2 was carried out by non-transferred arc thermal plasma reactor using ilmenite as the precursor material. The powder ilmenite was vaporized at high temperature in plasma flame and converted to a gaseous state of ions in the metastable phase. On cooling, chamber condensation process takes place on recombination of ions for the formation of nanoparticles. The top-to-bottom approach induces the disintegration of complex ilmenite phases into simpler compounds of iron oxide and titanium dioxide phases. The vapor-phase reaction mechanism was carried out in thermal plasma zone for the synthesis of nanoparticles from ilmenite compound in a plasma reactor. The easy separation of iron particles from TiO2 was taken place in the plasma chamber with deposition of light TiO2 particles at the top of the cooling chamber and iron particles at the bottom. The dissociation and combination process of mechanism and synthesis are studied briefly in this article. The product TiO2 nanoparticle shows the purity with a major phase of rutile content. TiO2 nanoparticles produced in vapor-phase reaction process shows more photo-induced capacity.

  14. Uso de olanzapina e eletroconvulsoterapia em um paciente com esquizofrenia catatônica refratária e antecedentes de síndrome neuroléptica maligna Olanzapina y ECT en un enfermo con esquizofrenia catatónica refractaria y alto riesgo de síndrome neuroléptico maligno Olanzapine and ECT combined therapy in a refractory catatonic subtype schizophrenia patient with previous neuroleptic malignant syndrome episodes

    Directory of Open Access Journals (Sweden)

    Pedro Gomes de Alvarenga

    2005-12-01

    Full Text Available Este artigo descreve a história clínica e o manejo de um paciente masculino adulto com esquizofrenia catatônica refratária a dois neurolépticos típicos (haloperidol e clorpromazina e a outro agente atípico (risperidona, e com antecedente de dois episódios de síndrome neuroléptica maligna em vigência de neurolépticos típicos. Os autores optaram pela associação de eletroconvulsoterapia (ECT e olanzapina (7,5 mg. Foram obtidos consideráveis benefícios para o paciente.Presentamos un relato clínico referente a la historia precedente y al desarrollo de un enfermo varón con esquizofrenia catatónica refractaria a los neurolépticos convencionales (clorpromazina y haloperidol y a otro agente de nueva generación (risperidona. El enfermo presentó, en dos ocasiones, síndrome neuroléptico maligno, provocado por el uso de los neurolépticos convencionales. Los autores emplearon ECT y olanzapina (7,5 mg obteniendo considerable éxito clínico.This article describes the clinical history and management of an adult male patient with refractory catatonic schizophrenia to two typically used neurolpetic medications (haloperidol and chlorpromazine and to another atypical agent (risperidone.The patient had also presented two neuroleptic malignant syndrome episodes due to typical neuroleptic agents. The authors combined ECT and olanzapine (7.5 mg as treatment, and a considerable clinical improvement was obtained.

  15. Preliminary evaluation of cryogenic two-phase flow imaging using electrical capacitance tomography

    Science.gov (United States)

    Xie, Huangjun; Yu, Liu; Zhou, Rui; Qiu, Limin; Zhang, Xiaobin

    2017-09-01

    The potential application of the 2-D eight-electrode electrical capacitance tomography (ECT) to the inversion imaging of the liquid nitrogen-vaporous nitrogen (LN2-VN2) flow in the tube is theoretically evaluated. The phase distribution of the computational domain is obtained using the simultaneous iterative reconstruction technique with variable iterative step size. The detailed mathematical derivations for the calculations are presented. The calculated phase distribution for the two detached LN2 column case shows the comparable results with the water-air case, regardless of the much reduced dielectric permittivity of LN2 compared with water. The inversion images of total eight different LN2-VN2 flow patterns are presented and quantitatively evaluated by calculating the relative void fraction error and the correlation coefficient. The results demonstrate that the developed reconstruction technique for ECT has the capacity to reconstruct the phase distribution of the complex LN2-VN2 flow, while the accuracy of the inversion images is significantly influenced by the size of the discrete phase. The influence of the measurement noise on the image quality is also considered in the calculations.

  16. Sensor integritY Management and Prognostics Technology with On-line fault Mitigation (SYMPTOM) for Improved Flight Safety of Commercial Aircraft, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — SSCI proposes to develop and test the Sensor integritY Management and Prognostics Technology with On-line fault Mitigation (SYMPTOM) system. The SYMPTOM assures...

  17. Fiscal Year 2010 Phased Construction Completion Report for EU Z2-32 in Zone 2, East Tennessee Technology Park, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    Bechtel Jacobs

    2010-02-01

    The Record of Decision for Soil, Buried Waste, and Subsurface Structure Actions in Zone 2, East Tennessee Technology Park, Oak Ridge, Tennessee (DOEIORJO 1-2161 &D2) (Zone 2 ROD) acknowledged that most of the 800 acres in Zone 2 were contaminated, but that sufficient data to confirm the levels of contamination were lacking. The Zone 2 ROD further specified that a sampling strategy for filling the data gaps would be developed. The Remedial Design Report/Remedial Action Work Plan for Zone 2 Soils, Slabs, and Subsurface Structures, East Tennessee Technology Park, Oak Ridge, Tennessee (DOEIORIO 1 -2224&D3) (RDRJRAWP) defined the sampling strategy as the Dynamic Verification Strategy (DVS), generally following the approach used for characterization of the Zone I exposure units (EUs). The Zone 2 ROD divided the Zone 2 area into seven geographic areas and 44 EUs. To facilitate the data quality objectives (DQOs) of the DVS process, the RDR/RAWP regrouped the 44 EUs into 12 DQO scoping EU groups. These groups facilitated the DQO process by placing similar facilities and their support facilities together, which allowed identification of data gaps. The EU groups were no longer pertinent after DQO planning was completed and characterization was conducted as areas became accessible. As the opportunity to complete characterization became available, the planned DVS program was completed for the EU addressed in this document (EU Z2-32). The purpose of this Phased Construction Completion Report (PCCR) is to address the following: (1) Document DVS characterization results for EU Z2-32. (2) Describe and document the risk evaluation and determine if the EU meets the Zone 2 ROD requirements for unrestricted industrial use to 10 ft bgs. (3) Identify additional areas not defined in the Zone 2 ROD that require remediation based on the DVS evaluation results. (4) Describe the remedial action performed in the K-1066-G Yard in EU Z2-32. Approximately 18.4 acres are included in the EU

  18. Gymnastics in Phase Space

    Energy Technology Data Exchange (ETDEWEB)

    Chao, Alexander Wu; /SLAC

    2012-03-01

    As accelerator technology advances, the requirements on accelerator beam quality become increasingly demanding. Facing these new demands, the topic of phase space gymnastics is becoming a new focus of accelerator physics R&D. In a phase space gymnastics, the beam's phase space distribution is manipulated and precision tailored to meet the required beam qualities. On the other hand, all realization of such gymnastics will have to obey accelerator physics principles as well as technological limitations. Recent examples of phase space gymnastics include Emittance exchanges, Phase space exchanges, Emittance partitioning, Seeded FELs and Microbunched beams. The emittance related topics of this list are reviewed in this report. The accelerator physics basis, the optics design principles that provide these phase space manipulations, and the possible applications of these gymnastics, are discussed. This fascinating new field promises to be a powerful tool of the future.

  19. Connecting Technology and Learning.

    Science.gov (United States)

    Woolley, Ginny

    1998-01-01

    Teacher training programs must go beyond "how-to" workshops to facilitate understanding about technology's relationship to learning. An International School of Bangkok training program transforms teachers into learners immersed in technology-rich environments. The process involves seven phases: getting ready, learning about technology,…

  20. DEVELOPMENT OF REACTION-DRIVEN IONIC TRANSPORT MEMBRANES (ITMs) TECHNOLOGY: PHASE IV/BUDGET PERIOD 6 “Development of ITM Oxygen Technology for Integration in IGCC and Other Advanced Power Generation Systems”

    Energy Technology Data Exchange (ETDEWEB)

    David, Studer

    2012-03-01

    Air Products and Chemicals, along with development participants and in association with the U.S. Department of Energy, has made substantial progress in developing a novel air separation technology. Unlike conventional cryogenic processes, this method uses high-temperature ceramic membranes to produce high-purity oxygen. The membranes selectively transport oxygen ions with high flux and infinite theoretical selectivity. Reaction-driven ceramic membranes are fabricated from non-porous, multi-component metallic oxides, operate at temperatures typically over 700°C, and have exceptionally high oxygen flux and selectivity. Oxygen from low-pressure air permeates as oxygen ions through the ceramic membrane and is consumed through chemical reactions, thus creating a chemical driving force that pulls oxygen ions across the membrane at high rates. The oxygen reacts with a hydrocarbon fuel in a partial oxidation process to produce a hydrogen and carbon monoxide mixture – synthesis gas. This project expands the partial-oxidation scope of ITM technology beyond natural gas feed and investigates the potential for ITM reaction-driven technology to be used in conjunction with gasification and pyrolysis technologies to provide more economical routes for producing hydrogen and synthesis gas. This report presents an overview of the ITM reaction-driven development effort, including ceramic materials development, fabrication and testing of small-scale ceramic modules, ceramic modeling, and the investigation of gasifier integration schemes