WorldWideScience

Sample records for technologies case studies

  1. Educational Potential of Case-Study Technology

    OpenAIRE

    Fedorinova, Zoya; Vorobeva, Victoria; Malyanova, Marina

    2015-01-01

    This article presents the results of phenomenological and typological analysis of case-study technology educational potential. The definition “educational potential of case-study technology” is given, the main characteristics of which are changed in communication and collaborative activity quality, appearance of educational initiatives, change of participants’ position in learning process, formation of “collective subject” in collaborative activity, increase of learning (subject) results. Dep...

  2. A Case Study of Technology Choices by High School Students

    Science.gov (United States)

    Owens-Hartman, Amy R.

    2015-01-01

    The purpose of this case study was to examine student technology choices when given the freedom to choose technology devices to complete a project-based learning activity in a content area of study. The study also analyzed factors affecting technology choice as well as how technology proficiency scores aligned to technology choices. Patterns and…

  3. Reactive membrane technology: Two case studies

    DEFF Research Database (Denmark)

    Zeuner, Birgitte; Luo, Jianquan; Pinelo, Manuel

    2014-01-01

    investigated the effect of applied pressure, enzyme concentration, pH, and membrane properties on fouling-induced enzyme immobilization. In another study, the production of the human milk oligosaccharide 3’-sialyllactose by an engineered sialidase from Trypanosoma rangeli (Tr6) was significantly improved......Enzymatic processes are generally sustainable processes that use mild conditions and natural substrates. Membrane technology can be employed for enzyme immobilization as well as for recycling free enzymes. Using alcohol dehydrogenase (ADH) as part of a process to recycle CO2 to methanol, we...... in an enzymatic membrane reactor. The entire process can be improved by employing a series of ultra- and nanofiltrations....

  4. Cooperation, Technology, and Performance: A Case Study.

    Science.gov (United States)

    Cavanagh, Thomas; Dickenson, Sabrina; Brandt, Suzanne

    1999-01-01

    Describes the CTP (Cooperation, Technology, and Performance) model and explains how it is used by the Department of Veterans Affairs-Veteran's Benefit Administration (VBA) for training. Discusses task analysis; computer-based training; cooperative-based learning environments; technology-based learning; performance-assessment methods; courseware…

  5. Information Technology Diffusion: A Comparative Case Study of Intranet Adoption

    OpenAIRE

    Zolla, George A., Jr.

    1999-01-01

    This exploratory study identifies factors that influence the adoption and diffusion of intranet technology. A comparative case study of bipolar organizations is used to identify crucial implementation factors and create an innovation adoption model. A strategic approach for the adoption and diffusion of intranet technology is then presented.

  6. A case study of technology transfer: Cardiology

    Science.gov (United States)

    Schafer, G.

    1974-01-01

    Research advancements in cardiology instrumentation and techniques are summarized. Emphasis is placed upon the following techniques: (1) development of electrodes which show good skin compatibility and wearer comfort; (2) contourography - a real time display system for showing the results of EKGs; (3) detection of arteriosclerosis by digital computer processing of X-ray photos; (4) automated, noninvasive systems for blood pressure measurement; (5) ultrasonoscope - a noninvasive device for use in diagnosis of aortic, mitral, and tricuspid valve disease; and (6) rechargable cardiac pacemakers. The formation of a biomedical applications team which is an interdisciplinary team to bridge the gap between the developers and users of technology is described.

  7. University-to-industry advanced technology transfer. A case study

    Energy Technology Data Exchange (ETDEWEB)

    Goldhor, R S; Lung, R T

    1983-06-01

    This case study examines the events in the transfer of an advanced technology (a text-to-speech reading machine) from the university group that developed the technology to an industrial firm seeking to exploit the innovation. After a brief history of the six-year project, the paper discusses the roles of the participants, markets, and time and cost considerations. A model of technology transfer is presented and policy implications derived from the case are discussed. Emphasis is placed on the need for matching technical competence between donor and recipient, and on the function of a transfer agent in facilitating the social process of technology transfer. 42 references, 6 figures, 4 tables.

  8. Integrating Educational Technologies into Teacher Education: A Case Study

    Science.gov (United States)

    Rawlins, Peter; Kehrwald, Benjamin

    2014-01-01

    This article is a case study of an integrated, experiential approach to improving pre-service teachers' understanding and use of educational technologies in one New Zealand teacher education programme. The study examines the context, design and implementation of a learning activity which integrated student-centred approaches, experiential…

  9. Project-Based Learning in Electronic Technology: A Case Study

    Science.gov (United States)

    Li, Li

    2015-01-01

    A case study of project-based learning (PBL) implemented in Tianjin University of Technology and Education is presented. This multidiscipline project is innovated to meet the novel requirements of industry while keeping its traditional effectiveness in driving students to apply knowledge to practice and problem-solving. The implementation of PBL…

  10. Educational Technology Adopters: A Case Study in University of Botswana

    Science.gov (United States)

    Dintoe, Seitebaleng Susan

    2018-01-01

    Although University of Botswana implemented national ICT policies and trained the lecturers to use educational technology, there was low-level use of eLearning in teaching and learning. In this regard, qualitative case study approach was used to explore and specifically focus on one aspect of the phenomenon; that is, the University of Botswana as…

  11. Case Study – Idling Reduction Technologies for Emergency Service Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Laughlin, Michael [Argonne National Lab. (ANL), Argonne, IL (United States); Owens, Russell J. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-01-01

    This case study explores the use of idle reduction technologies (IRTs) on emergency service vehicles in police, fire, and ambulance applications. Various commercially available IRT systems and approaches can decrease, or ultimately eliminate, engine idling. Fleets will thus save money on fuel, and will also decrease their criteria pollutant emissions, greenhouse gas emissions, and noise.

  12. Hurdling barriers through market uncertainty: Case studies ininnovative technology adoption

    Energy Technology Data Exchange (ETDEWEB)

    Payne, Christopher T.; Radspieler Jr., Anthony; Payne, Jack

    2002-08-18

    The crisis atmosphere surrounding electricity availability in California during the summer of 2001 produced two distinct phenomena in commercial energy consumption decision-making: desires to guarantee energy availability while blackouts were still widely anticipated, and desires to avoid or mitigate significant price increases when higher commercial electricity tariffs took effect. The climate of increased consideration of these factors seems to have led, in some cases, to greater willingness on the part of business decision-makers to consider highly innovative technologies. This paper examines three case studies of innovative technology adoption: retrofit of time-and-temperature signs on an office building; installation of fuel cells to supply power, heating, and cooling to the same building; and installation of a gas-fired heat pump at a microbrewery. We examine the decision process that led to adoption of these technologies. In each case, specific constraints had made more conventional energy-efficient technologies inapplicable. We examine how these barriers to technology adoption developed over time, how the California energy decision-making climate combined with the characteristics of these innovative technologies to overcome the barriers, and what the implications of hurdling these barriers are for future energy decisions within the firms.

  13. Cost decreases in environmental technology. Evidence from four case studies

    Energy Technology Data Exchange (ETDEWEB)

    Oosterhuis, F. [Instituut for Environmental Studies, Vrije Universiteit VU, Amsterdam (Netherlands)

    2007-07-15

    The cost of a new technology tends to decrease as its uptake grows, and environmental technology is no exception to this general rule. Factors that can bring about such cost reductions include economies of scale, 'learning-by-doing', incremental technological improvements, and growing competition. In preparing environmental policies, the potential for future cost reductions is often disregarded. The present study aims to provide some additional empirical evidence on the cost decreases in environmental technology and the factors that lie behind them. To this end, four exemplary case studies have been selected. The first case (NOx emission abatement by Selective Catalytic Reduction (SCR)), shows a wide variety in cost estimates, without a clear trend. This is even true for the costs of a fairly homogeneous type of investment (SCR in coal fired power plants). Nevertheless, it is clear that an important cost decrease has been achieved by prolonging the lifetime of the catalyst, which is one of the main cost components in SCR. In the second case (NH3 emission abatement by chemical air scrubbers in pig farming) there is not yet sufficient experience with the technology to draw conclusions on the development of costs. However, it is already clear that economizing on the capacity of the system can contribute to important cost savings. Three-way catalytic converters in cars have shown significant price decreases following their large scale introduction on the European market in the early 1990s. Probably economies of scale have played an important role in this case, as the size of the market made mass production possible. To some extent, cost reductions may also be attributed to improvements such as the need for less materials (e.g. platinum). Furthermore, the performance of catalytic converters has improved, implying that the cost per unit of emission reduction has decreased even more than the cost of the device itself. Market prices of Compact Fluorescent Lamps

  14. Technology transfer for Ukrainian milk treatment: A case study

    International Nuclear Information System (INIS)

    Dunn, M.J.; Walker, J.S.

    1994-01-01

    As a result of the Chernobyl Nuclear Power Plant accident, radioactive fission products have contaminated the food chain in the Ukraine. The highest doses to humans are a result of cesium contamination in milk. The milk produced in the Ukraine contains radioactive cesium at levels up to 10 times the acceptance standards. Bradtec has developed and demonstrated technology for the US Department of Energy for the treatment of groundwater and effluent water. This technology has also been tested and demonstrated for the Ukrainian government for the purpose of treating contaminated milk. Bradtec, a small business offering specialized technologies in the field of environmental remediation and waste management, has successfully worked with a consortium of businesses, National Laboratories and DOE Headquarters staff to develop and implement a technology demonstration strategy which has led to the implementation of a series collaboration agreements with Ukrainian officials. This paper describes, in a case study approach, the path followed by Bradtec and its collaboration partners in successfully implementing a technology transfer strategy. Also presented is an update on new programs that can provide benefit to private sector companies as DOE seeks to assist the private sector in joint venture/technology transfer relationships with the NIS (New Independent States). This paper should be of interest to all businesses seeking to participate in business opportunities in the NIS

  15. Effectiveness of Subsidies in Technology Adoption: A Case Study Involving Reverse Osmosis (RO Membrane Technology

    Directory of Open Access Journals (Sweden)

    Nur Laili

    2016-12-01

    Full Text Available Adoption of new technologies is a process that involves technological learning and penetration of new products into the market. Within the process of new technologies adoption, government usually intervened by providing incentives, in order to support the technology adoption to be succeed. This paper examines the effectiveness of incentives for the sustainability of reverse osmosis (RO membrane technology adoption. The study conducted through single case study on SWRO installation in Mandangin Island, East Java, Indonesia. Results of case study indentify the existence of government incentive in the form of direct subsidies to decrease the price of clean water. Although successful in reducing the price of water, but effectiveness of the subsidy on the sustainability of SWRO is still low, which is operates only 30% in a year. Further analysis shows that these subsidies actually be counter-productive to the sustainability of SWRO installation.

  16. Managing knowledge: a technology transfer case study in IEN

    International Nuclear Information System (INIS)

    Pereira, Ana Gabriella Amorim Abreu

    2009-01-01

    Knowledge management is paramount nowadays. In order to enable the members of an organization to deal with their current situations effectively it is mandatory to know and enhance its intellectual capital. Managing the organization knowledge is important to the extent that it allows and reinforce its mission (what we are trying to accomplish?), and performance (how do we deliver the results?). As a result of a knowledge management effort, the organization can create value for itself and for society as a whole. In this paper, we argue that a technology developed at a research institute and transferred to an industry is knowledge to be managed in order to create value, both for the society and for the Institute. In order to manage such knowledge, it is proposed an approach to enhance the value creation potential of a technology transfer. This paper propose an investigation to expand the understanding on how a public research institute and a private firm could introduce their value creation wishes into a technology transfer agreement in a way to reflect and provide the realization of those wishes. It is proposed that, from the identification of the organizations expectations it is possible to infer which agreement attributes will contribute to that value creation and to establish satisfactory agreement configurations. These configurations have the potential to generate those consequences, given that, through the transfer, each organization seeks to increase potential benefits and to reduce potential sacrifices. Supported by exchange flow and value creation models, by the knowledge management and the means-end theory, an approach to increase the value creation potential of a technology transfer is proposed. Evidences from a case study sustain the proposed approach. The case study unity is the Instituto de Engenharia Nuclear, a public research institute. (author)

  17. Demonstrating and implementing innovative technologies: Case studies from the USDOE Office of Technology Development

    International Nuclear Information System (INIS)

    Brouns, T.M.; Koegler, K.J.; Mamiya, L.S.

    1995-02-01

    This paper describes elements of success for demonstration, evaluation, and transfer for deployment of innovative technologies for environmental restoration. They have been compiled from lessons learned through the US Department of Energy (DOE) Office of Technology Development's Volatile Organic Compounds in Arid Soil Integrated Demonstration (VOC-Arid ID). The success of the VOC-Arid ID program was determined by the rapid development demonstration, and transfer for deployment of technologies to operational sites that improve on safety, cost, and/or schedule of performance over baseline technologies. The VOC-Arid ID successfully fielded more than 25 innovative technology field demonstrations; several of the technologies demonstrated have been successfully transferred for deployment Field demonstration is a critical element in the successful transfer of innovative technologies into environmental restoration operations. The measures of success for technology demonstrations include conducting the demonstration in a safe and controlled environment and generating the appropriate information by which to evaluate the technology. However, field demonstrations alone do not guarantee successful transfer for deployment There are many key elements throughout the development and demonstration process that have a significant impact on the success of a technology. This paper presents key elements for a successful technology demonstration and transfer for deployment identified through the experiences of the VOC-Arid ID. Also, several case studies are provided as examples

  18. International energy technology collaboration and climate change mitigation. Case study 1. Concentrating Solar Power Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Philibert, C. [Energy and Environment Division, International Energy Agency IEA, Paris (France)

    2004-07-01

    international collaboration by describing the globalisation of the economy and current efforts of technology collaboration and transfer. Finally, it considers various ways to strengthen international energy technology collaboration. This paper is one of six case-studies designed in an effort to provide practical insights on the role international technology collaboration could play to achieve the objectives of the UNFCCC. They will all consider the past achievements of international technology collaboration, and the role it could play in helping to develop and disseminate new technologies in the future: what worked, what did not work and why, and what lessons might be drawn from past experiences. Most case studies consider energy technologies that could help mitigate greenhouse gas emissions. A few others consider areas not directly related to greenhouse gas emissions but where international technology collaboration has proven particularly successful in the past. This case study reviews past and current experience in international collaboration in the field of concentrating solar technologies in order to identify lessons that may be relevant for more general climate-friendly technology collaboration. It presents concentrating solar technologies in their current status, recent achievements and development prospects. It analyses the present successes and failures of different forms of international collaboration in this field, and draws lessons for further elaboration of international technology collaboration in addressing climate change.

  19. Selling Technology in Technical Advertisements: A Case Study.

    Science.gov (United States)

    Guthrie, James R.

    1995-01-01

    Argues that, as the category of "technical products" has expanded and the public's enthusiasm for such products has lessened, marketing writers have begun to reconsider their approaches to technology in ads. Studies two technical ads in detail, and compares the ways in which they portray technology. (SR)

  20. Education Technology Services at Indiana University: A Case Study.

    Science.gov (United States)

    Bichelmeyer, B. A.; Hara, Noriko; Yi, Jessi; Dennen, Vanessa; Avers, Dale; Tzeng, Jeng-Yi

    1998-01-01

    This paper, based on a qualitative research study, describes the technology resources available in the Indiana University School of Education, explains the range of services provided by Education Technology Services (ETS), documents the organizational structure of ETS, and describes the key processes and culture of ETS. (Author/AEF)

  1. Health information management using optical storage technology: case studies.

    Science.gov (United States)

    Kohn, D

    1992-05-01

    All the health care facilities examined in the case studies addressed several important organizational issues before and during the installation of their systems. All the facilities examined employee commitment. The prudent managers considered how easily their employees adapt to changes in their jobs and work environment. They considered how enthusiastic cooperation can be fostered in the creation of a liberated and reengineered office. This was determined not only by each individual's reaction to change, but also by the health care facility's track record with other system installations. For example, document image, diagnostic image, and coded data processing systems allow the integration of divergent health care information systems within complex institutions. Unfortunately, many institutions are currently struggling with how to create an information management architecture that will integrate their mature systems, such as their patient care and financial systems. Information managers must realize that if optical storage technology-based systems are used in a strategic and planned fashion, these systems can act as focal points for systems integration, not as promises to further confuse the issue. Another issue that needed attention in all the examples was the work environment. The managers considered how the work environment was going to affect the ability to integrate optical image and data systems into the institution. For example, many of these medical centers have created alliances with clinics, HMOs, and large corporate users of medical services. This created a demand for all or part of the health information outside the confines of the original institution. Since the work environment is composed of a handful of factors such as merged medical services, as many work environment factors as possible were addressed before application of the optical storage technology solution in the institutions. And finally, the third critical issue was the organization of work

  2. Strategic Management in Business Information Technology: A Case Study

    Directory of Open Access Journals (Sweden)

    Marcos Weber

    2013-09-01

    Full Text Available The Information Technology (IT sector is regarded as strategic for national economy. In Brazil, this sector is formed mostly of micro and small businesses. This article aims at understanding how does the strategic management process occurs in a small IT company, according to the schools of strategy and the strategy-as-practice approach. The method applied was a single case study of a small IT company, located in Rio Grande do Sul. The analyzed data revealed that the company adopts an informal strategic management centered on its directors, which may be related to the entrepreneurial school of strategy. However, data also indicate the presence of features of other schools of strategy along the company trajectory. We analyzed the strategy as social practice at the strategic level and also at the tactical level of the organization, through the guidance of managers, their interactions with customers and suppliers, their decision-making processes, among other practices related to everyday life. The results of the article shed light on the process of strategic management in micro and small IT companies, generating insights that can be useful for managers of similar companies.

  3. INL - NNL an International Technology Collaboration Case Study - Advanced Fogging Technologies for Decommissioning - 13463

    International Nuclear Information System (INIS)

    Banford, Anthony; Edwards, Jeremy; Demmer, Rick; Rankin, Richard; Hastings, Jeremy

    2013-01-01

    International collaboration and partnerships have become a reality as markets continue to globalize. This is the case in nuclear sector where over recent years partnerships commonly form to bid for capital projects internationally in the increasingly contractorized world and international consortia regularly bid and lead Management and Operations (M and O) / Parent Body Organization (PBO) site management contracts. International collaboration can also benefit research and technology development. The Idaho National Laboratory (INL) and the UK National Nuclear Laboratory (NNL) are internationally recognized organizations delivering leading science and technology development programmes both nationally and internationally. The Laboratories are actively collaborating in several areas with benefits to both the laboratories and their customers. Recent collaborations have focused on fuel cycle separations, systems engineering supporting waste management and decommissioning, the use of misting for decontamination and in-situ waste characterisation. This paper focuses on a case study illustrating how integration of two technologies developed on different sides of the Atlantic are being integrated through international collaboration to address real decommissioning challenges using fogging technology. (authors)

  4. INL - NNL an International Technology Collaboration Case Study - Advanced Fogging Technologies for Decommissioning - 13463

    Energy Technology Data Exchange (ETDEWEB)

    Banford, Anthony; Edwards, Jeremy [National Nuclear Laboratory, 5th Floor Chadwick House, Birchwood Park, Warrington WA3 6AE(United Kingdom); Demmer, Rick; Rankin, Richard [Idaho National Laboratory, Idaho Falls, ID 83401(United States); Hastings, Jeremy [National Nuclear Laboratory, Central Laboratory Sellafield, Seascale, Cumbria CA20 1PG (United Kingdom)

    2013-07-01

    International collaboration and partnerships have become a reality as markets continue to globalize. This is the case in nuclear sector where over recent years partnerships commonly form to bid for capital projects internationally in the increasingly contractorized world and international consortia regularly bid and lead Management and Operations (M and O) / Parent Body Organization (PBO) site management contracts. International collaboration can also benefit research and technology development. The Idaho National Laboratory (INL) and the UK National Nuclear Laboratory (NNL) are internationally recognized organizations delivering leading science and technology development programmes both nationally and internationally. The Laboratories are actively collaborating in several areas with benefits to both the laboratories and their customers. Recent collaborations have focused on fuel cycle separations, systems engineering supporting waste management and decommissioning, the use of misting for decontamination and in-situ waste characterisation. This paper focuses on a case study illustrating how integration of two technologies developed on different sides of the Atlantic are being integrated through international collaboration to address real decommissioning challenges using fogging technology. (authors)

  5. Technology Integration in the Schools of Guyana: A Case Study

    Science.gov (United States)

    MacKinnon, Gregory; MacKinnon, Paula

    2010-01-01

    The following study examines the implementation of learning technologies in Guyana, South America. Specifically, the study addresses the impact of using interactive radio instruction for teaching mathematics and SuccessMaker software for enhancing literacy skills. The research results were based on surveys, interviews, classroom observations, and…

  6. Indicators of creativity in a technology class: a case study

    African Journals Online (AJOL)

    study we investigated how learners demonstrate creativity whilst en- gaging in the technological process employing a qualitative research strategy, with observation and focus group interviews as the methods of data collection. From this data, indicators of creativity emerged. Schools must encourage learners to be creative ...

  7. Indicators of creativity in a technology class: a case study ...

    African Journals Online (AJOL)

    Teachers seem to lack the skills and knowledge needed to recognise when creativity is taking place. In this study we investigated how learners demonstrate creativity whilst engaging in the technological process employing a qualitative research strategy, with observation and focus group interviews as the methods of data ...

  8. Elementary Teachers' Experiences with Technology Professional Development and Using Technology in the Classroom: A Case Study

    Science.gov (United States)

    Grizzle, Pamela Lavon

    2016-01-01

    In order for educators to prepare students for technology-enhanced learning educators must first be prepared. The digital divide and technology professional development are two factors impacting the depth at which technology is integrated into the classroom. The local problem addressed in this study was that the impact of technology professional…

  9. Case study of siting technology for underground nuclear power plant

    International Nuclear Information System (INIS)

    Hibino, Satoshi; Komada, Hiroya; Honsho, Shizumitsu; Fujiwara, Yoshikazu; Motojima, Mutsumi; Nakagawa, Kameichiro; Nosaki, Takashi

    1991-01-01

    Underground siting method is one of new feasible siting methods for nuclear power plants. This report presents the results on case studies on underground siting. Two sites of a steeply inclined and plateau like configurations were selected. 'Tunnel type cavern; all underground siting' method was applied for the steeply inclined configuration, and 'shaft type semi-cavern; partial underground siting' method was applied for the plateau like configuration. The following designs were carried out for these two sites as case studies; (1) conceptual designs, (2) geological surveys and rock mechanics tests, (3) stability analysis during cavern excavations, (4) seismic stability analysis of caverns during earthquake, (5) reinforcement designs for caverns, (6) drainage designs. The case studies showed that these two cases were fully feasible, and comparison between two cases revealed that the 'shaft type semi-cavern; partial underground siting' method was more suitable for Japanese islands. As a first step of underground siting, therefore, the authors recommend to construct a nuclear power plant by this method. (author)

  10. Technology Use in Elementary Education in Turkey: A Case Study

    Science.gov (United States)

    Kurt, Serhat

    2010-01-01

    Background: As countries continue to invest in technology and place educational technology in schools, teachers are expected to make use of technology in their teaching. At this point in time, we can say that technology will stay in schools. Many countries have already included the integration of technology into education in their agenda for…

  11. BICAPA case study of natural hazards that trigger technological disasters

    Science.gov (United States)

    Boca, Gabriela; Ozunu, Alexandru; Nicolae Vlad, Serban

    2010-05-01

    Industrial facilities are vulnerable to natural disasters. Natural disasters and technological accidents are not always singular or isolated events. The example in this paper show that they can occur in complex combinations and/or in rapid succession, known as NaTech disasters, thereby triggering multiple impacts. This analysis indicates that NaTech disasters have the potential to trigger hazmat releases and other types of technological accidents. Climate changes play an important role in prevalence and NATECH triggering mechanisms. Projections under the IPCC IS92 a scenario (similar to SRES A1B; IPCC, 1992) and two GCMs indicate that the risk of floods increases in central and eastern Europe. Increase in intense short-duration precipitation is likely to lead to increased risk of flash floods. (Lehner et al., 2006). It is emergent to develop tools for the assessment of risks due to NATECH events in the industrial processes, in a framework starting with the characterization of frequency and severity of natural disasters and continuing with complex analysis of industrial processes, to risk assessment and residual functionality analysis. The Ponds with dangerous technological residues are the most vulnerable targets of natural hazards. Technological accidents such as those in Baia Mare, (from January to March 2000) had an important international echo. Extreme weather phenomena, like those in the winter of 2000 in Baia Mare, and other natural disasters such as floods or earthquakes, can cause a similar disaster at Târnăveni in Transylvania Depression. During 1972 - 1978 three decanting ponds were built on the Chemical Platform Târnăveni, now SC BICAPA SA, for disposal of the hazardous-wastes resulting from the manufacture of sodium dichromate, inorganic salts, sludge from waste water purification and filtration, wet gas production from carbide. The ponds are located on the right bank of the river Târnava at about 35-50m from the flooding defense dam. The total

  12. Overcoming technology - obsolescence: a case study in Heavy Water Plant

    International Nuclear Information System (INIS)

    Gupta, O.P.; Sonde, R.R.; Wechalekar, A.K.

    2002-01-01

    Ammonia based Heavy Water Plants in India are set up essentially in conjunction with fertiliser plants for the supply of feed synthesis gas. Earlier ammonia was being produced in fertiliser plants using high-pressure technology which was highly energy intensive. However with fast developments in the field of production of ammonia, fertiliser plants are switching over to low pressure technology. Ammonia based heavy water plants have to operate on pressures corresponding to that of fertiliser plants. Due to low pressures in production of ammonia, heavy water plants would also be required to operate at low pressures than the existing operating pressures. This problem was faced at Heavy Water Plant at Baroda where GSFC supplying synthesis gas switched over to low pressure technology making it imperative on the part of Heavy Water Board to carry out modification to the main plant for continued operation of Heavy Water Plant, Baroda. Anticipating similar problems due to production of ammonia at lower pressures in other fertiliser plants linked to existing Heavy Water Plants, it became necessary for HWB to develop water ammonia front end. The feed in such a case would be water instead of synthesis gas. This would enable HWB to dispense with dependence on fertiliser plants especially if grass-root ammonia based heavy water plants are to be set up. Incorporation of water ammonia front end would enable HWB to de link ammonia based heavy water plants with fertiliser plants. This paper discusses the advantage of de linking heavy water plant respective fertiliser plant by incorporating water ammonia front end and technical issues related to front end technology. A novel concept of ammonia absorption refrigeration (AAR) was considered for the process integration with the front end. The incorporation of AAR with water ammonia front-end configuration utilizes liquid ammonia refrigerant to generate refrigeration without additional energy input which otherwise would have been

  13. Interrelations between business and technology : a case study

    OpenAIRE

    2014-01-01

    M.Ing. (Engineering Management) The current research investigated the inter-relationship between Steve Jobs and Apple Company. The study looked at Steve if he launched Apple with business orientation. The researcher used Yin’s (1994) single case, holistic design research method and looked at the data gathered from thirty-seven authors. Steve Jobs’ business orientation was measured using Snaddon (2008) business measures. Symbols were used to indicate whether the evidence found from differen...

  14. Cleaner technology diffusion: case studies, modeling and policy. Editorial

    NARCIS (Netherlands)

    Montalvo Corral, C.; Kemp, R.

    2008-01-01

    The development and application of cleaner technologies (environmental technologies) offer multiple benefits for the adopter: reduced emissions, less waste and cost savings from reduced resource use and savings on waste costs. The question here is: if cleaner technologies offer such great benefits

  15. Technology Use in a Japanese Immersion School: A Case Study.

    Science.gov (United States)

    Ketterer, Kimberley; Giannone, Darby

    1996-01-01

    Examines the uses of technology at Yujin Gakuen, a public elementary-level Japanese language immersion school located in Eugene, Oregon. Discusses goals that can be achieved through cooperative learning and instructional technology use, equipment and software, areas in which technology training and integration takes place, the role of educators,…

  16. Impact of Collaborative Work on Technology Acceptance: A Case Study from Virtual Computing

    Directory of Open Access Journals (Sweden)

    Abdullah Konak

    2016-12-01

    Findings\tThe findings of the study supported that collaborative work could improve non-technology students’ acceptance of RVCLs. However, no significant effect of collaborative work on technology acceptance was observed in the case of technology students. Recommendations for Practitioners\tEducators should consider the benefits of collaborative work while introducing a new technology to students who may not have background in the technology introduced. Recommendation for Researchers In this study, student technological background was found to be a significant factor for technology acceptance; hence, it is recommended that technological background is included in TAM studies as an external factor. Future Research\tRepeating similar studies with multiple exercises with varying degrees of challenge is required for a better understanding of how collaborative work and student technological background affect technology acceptance.

  17. Focus on Games & Simulations: Trends+Technologies+Case Studies

    Science.gov (United States)

    Weinstein, Margery

    2011-01-01

    A changing mindset combined with changing technology is driving the use of games and simulations. People are becoming more open to using games and simulations for learning, and, at the same time, the technologies are making the development of games and simulations easier and faster than a mere five years ago. Together, the changing mindset and the…

  18. Strategy Illusion - The Misinterpretation of Case Studies of Technological Change

    DEFF Research Database (Denmark)

    Howells, John

    A review of several classic innovation cases that have been widely misinterpreted. Amongst the reasons for misinterpreation are: lack of immersion in the detail of the cases; the bringing to a case of faulty assumptions about reality that are a product of single disciplinary specialisation....

  19. Technology management: case study of an integrated health system.

    Science.gov (United States)

    Dahl, D H; McFarlan, T K

    1994-12-01

    Technology management has assumed a role of vital importance in today's health care environment. Capital reserves and operating income have been stretched by pervasive and expensive technologies, while overall reimbursement has been reduced. It is imperative for hospitals to develop and consistently use technology management processes that begin prior to a technology's introduction in the hospital and continue throughout its life cycle. At Samaritan Health System (SHS), an integrated health care delivery system based in Phoenix, technology management provides tools to improve decision making and assist in the system's integration strategy as well as control expenses. SHS uses a systemwide technology-specific plan to guide acquisition and/or funding decisions. This plan describes how particular technologies can help achieve SHS' organizational goals such as promoting system integration and/or improving patient outcomes while providing good economic value. After technologies are targeted in this systemwide plan they are prioritized using a two-stage capital prioritization process. The first stage of the capital prioritization process considers the quantitative and qualitative factors critical for equitable capital distribution across the system. The second stage develops a sense of ownership among the parties that affect and are affected by the allocation at a facility level. This process promotes an efficient, effective, equitable, and defensible approach to resource allocation and technology decision making. Minimizing equipment maintenance expenditures is also an integral part of technology management at SHS. The keys to reducing maintenance expenditures are having a process in place that supports a routine fiscal evaluation of maintenance coverage options and ensuring that manufacturers are obligated to provide critical maintenance resources at the time of equipment purchase. Maintenance service options under consideration in this report include full

  20. Institutional dynamics and technology legitimacy - A framework and a case study on biogas technology

    NARCIS (Netherlands)

    Markard, Jochen; Wirth, Steffen; Truffer, Bernhard

    2016-01-01

    Legitimacy is central for both novel and established technologies to mobilize the resources necessary for growth and survival. A loss of legitimacy, in turn, can have detrimental effects for an industry. In this paper, we study the rise and fall of technology legitimacy of agricultural biogas in

  1. Science and technology awareness for preschool children: A case study

    CSIR Research Space (South Africa)

    Van Deventer, A

    2008-11-01

    Full Text Available not loose the opportunity to have a positive influence on the attitudes of people towards science and technology. The question that comes to mind is where and when to start? There is no clear answer to these questions, but what is obvious is that we cannot...

  2. Low cost construction technologies and materials - case study Mozambuique

    CSIR Research Space (South Africa)

    Kuchena, JC

    2009-09-01

    Full Text Available Low cost or affordable construction technologies and materials are often touted as a panacea in meeting the ever growing demand for rapid housing delivery in developing economies. Mozambique as with most of the developing world, from both historical...

  3. A Case Study of Three Satellite Technology Demonstration School Sites.

    Science.gov (United States)

    Law, Gordon

    The Satellite Technology Demonstration (STD) represented a cooperative and complex effort involving federal, regional, state and local interests and demonstrated the feasibility of media distribution by communication satellite of social services for rural audiences. As part of a comprehensive evaluation plan, the summative data base was augmented…

  4. Wearable technology to help with visual challenges - two case studies.

    Science.gov (United States)

    Kálmán, Viktor; Baczó, Csaba; Livadas, Makis; Csielka, Tamás

    2015-01-01

    Today as embedded computing technology and sensors become cheaper and smaller wearable technologies experience an unprecedented boom. This article presents two wearable systems that aim to help people with low vision and the blind in performing everyday tasks and doing sports. DIGIGLASSES is a project aimed at creating a pair of augmented reality digital glasses that present controlled light and contrast levels and marks selectable features on the field of vision to aid in everyday tasks. BLINDTRACK is guidance system that uses wireless localization and an innovative haptic feedback belt to guide blind runners along the running track. Both systems are briefly presented along with the most relevant technical details and user feedback where applicable. Both projects were funded by the EU FP7. Corresponding author V. Kalman: viktor.kalman@ateknea.com.

  5. WERC -- a case study of a successful technology transfer partnership

    International Nuclear Information System (INIS)

    Bhada, R.K.; Ghassemi, A.; Jacquez, R.; Kauffman, D.

    1994-01-01

    In 1990, the Department of Energy approved a cooperative agreement for a Waste-management Education and Research Consortium (WERC) program. This consortium includes as its members the New Mexico State University (NMSU), the University of New Mexico (UNM), the New Mexico Institute of Mining and Technology (NMIMT), the Navajo Community College, the Los Alamos National Laboratory, and the Sandia National Laboratories working with industrial affiliates. Several of the unique technologies developed via WERC are successfully demonstrated /via application at national laboratories and industrial sites. Some examples are: Remediation of soil contaminated with plutonium using a polymer capture process has been applied at a DOE waste site; Subsurface mapping of buried waste has been applied at a DOE integrated demonstration (ID) site; and A pipeline detection system has been applied to leak detection from storage tanks and pipelines in the oil industry. This paper will present how the WERC partnership has been successful because of its unique structure and method of operation

  6. Educational Technology Goes Mobile : Why? A Case Study of Finland

    OpenAIRE

    Pirhonen, Antti; Rousi, Rebekah

    2018-01-01

    Recent decades have revealed that the digital educational technology that is expected to revolutionise schooling for generations to come, is fraught with challenges. One major challenge is that educational systems vastly vary between cultures and countries. The differences start from the conceptualisation of education and school. It is, therefore, quite inaccurate to handle education as a universal concept. In this article the authors evade generalisation by discussing the use of ...

  7. Performance Measurement of Information Technology Governance: a Case Study

    OpenAIRE

    Andry, Johanes Fernandes

    2016-01-01

    Established in 2001, XYZ Cargo is a Freight Forwarder Service Company specialized in the logistic transportation located in Jakarta. XYZ Cargo has broad experiences in both ocean freight and air freight service and has more than sixty agents of partnership around the world. XYZ Cargo has implemented Information Technology (IT) that covers all key aspects of business processes of the enterprise. It has an impact on the strategic and competitive advantages of its success. Many organizations hav...

  8. The diffusion of medical technology, local conditions, and technology re-invention: a comparative case study on coronary stenting.

    Science.gov (United States)

    Hashimoto, Hideki; Noguchi, Haruko; Heidenreich, Paul; Saynina, Olga; Moreland, Abigail; Miyazaki, Shunichi; Ikeda, Shunya; Kaneko, Yoshihiro; Ikegami, Naoki

    2006-12-01

    Innovation of medical technology is a major driving force behind the increase in medical expenditures in developed countries. Previous studies identified that the diffusion of medical technology varied across countries according to the characteristics of regulatory policy and payment systems. Based on Roger's diffusion of innovation theory, this study purported to see how local practice norms, the evolving nature of diffusing technology, and local clinical needs in addition to differences in politico-economic systems would affect the process of innovation diffusion. Taking a case of coronary stenting, an innovative therapeutic technology in early 1990s, we provided a case study of hospital-based data between two teaching high-tech hospitals in Japan and the US for discussion. Stenting began to be widely used in both countries when complementary new technology modified its clinical efficacy, but the diffusion process still differed between the two hospitals due to (1) distinctive payment systems for hospitals and physicians, (2) practice norms in favor of percutaneous intervention rather than bypass surgery that was shaped by payment incentives and cultural attitudes, and (3) local patient's clinical characteristics that the technology had to be tailored for. The case study described the diffusion of stent technology as a dynamic process between patients, physicians, hospitals, health care systems, and technology under global and local conditions.

  9. Organizational Influences in Technology Adoption Decisions: A Case Study of Digital Libraries

    Science.gov (United States)

    Oguz, Fatih

    2016-01-01

    The purpose of this study was to understand the organizational level decision factors in technology adoption in the context of digital libraries. A qualitative case study approach was used to investigate the adoption of a specific technology, XML-based Web services, in digital libraries. Rogers' diffusion of innovations and Wenger's communities of…

  10. Distance Education in Information Technology, a case study

    DEFF Research Database (Denmark)

    Helbo, Jan; Knudsen, Morten

    2002-01-01

    Project organized problem based learning is a successful concept for on-campus education at Aalborg University. The "Aalborg concept" has been used in networked distance education as well. This paper describes a project from the first year of our Master of Information Technology education organized......, and the designed solution should be implemented on a test rig. In spite of this, the group fulfilled the goals satisfactorily, and made an impressive project. The main conclusions are, that the project work is a strong learning motivator, enhancing peer collaboration, for off-campus students as well. However...

  11. Evaluating interactive technology for an evolving case study on learning and satisfaction of graduate nursing students.

    Science.gov (United States)

    Vogt, Marjorie A; Schaffner, Barbara H

    2016-07-01

    Nursing education is challenged to prepare students for complex healthcare needs through the integration of teamwork and informatics. Technology has become an important teaching tool in the blended classroom to enhance group based learning experiences. Faculty evaluation of classroom technologies is imperative prior to adoption. Few studies have directly compared various technologies and their impact on student satisfaction and learning. The purpose of this study was to evaluate technology enhanced teaching methods on the learning and satisfaction of graduate students in an advanced pharmacology class using an unfolding case study. After IRB approval, students were randomly assigned to one of three groups: blogging group, wiki group or webinar group. Students completed the evolving case study using the assigned interactive technology. Student names were removed from the case studies. Faculty evaluated the case study using a rubric, while blinded to the assigned technology method used. No significant difference was found on case study grades, the range of grades on the assignment demonstrated little differences between the methods used. Students indicated an overall positive impact related to networking and collaboration on a satisfaction survey. Impact of technology methods needs to be explored in other areas of graduate nursing education. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. Technology Overview Using Case Studies of Alternative Landfill Technologies and Associated Regulatory Topics

    National Research Council Canada - National Science Library

    2003-01-01

    ... alternative landfill cover projects. The purpose of the case studies is to present examples of the flexibility used in the regulatory framework for approving alternative landfill cover designs, current research information about the use...

  13. Multiculturalism in Technology-Based Education: Case Studies on ICT-Supported Approaches

    Science.gov (United States)

    Garcia-Penalvo, Francicso Jose

    2013-01-01

    Our differences in language, cultures, and history around the world play a vital role in the way we learn. As technology-based education continues to be used worldwide, there is an ever growing interest in how multiculturalism comes into effect. Multiculturalism in Technology-Based Education: Case Studies on ICT-Supported Approaches explores the…

  14. Teachers as Participatory Designers: Two Case Studies with Technology-Enhanced Learning Environments

    Science.gov (United States)

    Cober, Rebecca; Tan, Esther; Slotta, Jim; So, Hyo-Jeong; Könings, Karen D.

    2015-01-01

    Teachers are not typically involved as participatory designers in the design of technology-enhanced learning environments. As they have unique and valuable perspectives on the role of technology in education, it is of utmost importance to engage them in a participatory design process. Adopting a case study methodology, we aim to reveal in what…

  15. School District Information Technology Disaster Recovery Planning: An Explanatory Case Study

    Science.gov (United States)

    Gray, Shaun L.

    2017-01-01

    Despite research and practitioner articles outlining the importance information technology disaster plans (ITDRPs) to organizational success, barriers have impeded the process of disaster preparation for Burlington County New Jersey school districts. The purpose of this explanatory qualitative case study was to understand how technology leader…

  16. Managers and Information Technology: A Case Study of Organizational Change in County Government.

    Science.gov (United States)

    Rosenbaum, Howard

    1992-01-01

    Discussion of the interrelationship of information technology, managers, and users, and the structure of public sector organizations focuses on a case study that examined the organizational changes in the information services department of a large, urban county government as a result of the use of sophisticated information technologies. (11…

  17. Using Semantic Web Technologies to Reproduce a Pharmacovigilance Case Study

    NARCIS (Netherlands)

    M. Hildebrand (Michiel); R Hoekstra; J.R. van Ossenbruggen (Jacco)

    2013-01-01

    htmlabstractWe provide a detailed report of a reproduction study of a paper published in the International Journal of Medical Sciences (IJMS). We first use the PROV-O ontology to model our reconstruction of the computational workflow of the original experiment and to systematically explicate all

  18. Distance Education in Information Technology, a case study

    DEFF Research Database (Denmark)

    Helbo, Jan; Knudsen, Morten

    2002-01-01

    , it is much more risky if the on-campus model is transferred directly to off-campus learning. The main reasons are that the students must communicate electronically, and that they are under a fierce time strain, studying part time and typically with a full time job and a family. Experiences with this type...

  19. Developing Public Policies for New Welfare Technologies – A Case Study of Telemedicine and Telehomecare

    DEFF Research Database (Denmark)

    Tambo, Torben

    2012-01-01

    and communication-based technologies (ICT) for homecare and monitoring (telemedicine, telehomecare). Despite major investments and national commitment, public policies have not yet found a general approach to move from technological and clinical opportunity and into large-scale regular use of the technology...... (normalisation). This article provides two case studies from Denmark; one case with hypertension monitoring at a local level and another case on national policy implementation through funding of selected demonstration projects. Among the findings are that policy-making processes certainly face major challenges...... in capturing research and development for the transition of technologies into working practice. Furthermore, policy approaches of supporting experimentation and demonstration are found inadequate in promoting technology into a level of normalisation in highly cross-organisational operational environments...

  20. Enhancing international technology cooperation for climate change mitigation. Lessons from an electromobility case study

    Energy Technology Data Exchange (ETDEWEB)

    Bhasin, Shikha

    2014-07-01

    As a global agreement on climate mitigation and absolute emissions reductions remains grid-locked, this paper assesses whether the prospects for international technology cooperation in low-carbon sectors can be improved. It analyses the case of international cooperation on electric vehicle technologies to elaborate on the trade-offs that cooperation such as this inherently attempts to balance- national growth objectives of industrial and technology development versus the global goods benefit of reducing greenhouse gas (GHG) emissions. It focuses on bilateral German-Chinese programmes for electric vehicle development, as well as multilateral platforms on low-carbon technology cooperation related to electric vehicles. Based on insights from these cases studies, this paper ultimately provides policy recommendations to address gaps in international technology cooperation at a bilateral level for ongoing German-Chinese engagement on electric vehicles; and at a multilateral level with a focus on the emerging technology cooperation framework of the United Nations Framework Convention on Climate Change (UNFCCC).

  1. Enhancing international technology cooperation for climate change mitigation. Lessons from an electromobility case study

    International Nuclear Information System (INIS)

    Bhasin, Shikha

    2014-01-01

    As a global agreement on climate mitigation and absolute emissions reductions remains grid-locked, this paper assesses whether the prospects for international technology cooperation in low-carbon sectors can be improved. It analyses the case of international cooperation on electric vehicle technologies to elaborate on the trade-offs that cooperation such as this inherently attempts to balance- national growth objectives of industrial and technology development versus the global goods benefit of reducing greenhouse gas (GHG) emissions. It focuses on bilateral German-Chinese programmes for electric vehicle development, as well as multilateral platforms on low-carbon technology cooperation related to electric vehicles. Based on insights from these cases studies, this paper ultimately provides policy recommendations to address gaps in international technology cooperation at a bilateral level for ongoing German-Chinese engagement on electric vehicles; and at a multilateral level with a focus on the emerging technology cooperation framework of the United Nations Framework Convention on Climate Change (UNFCCC).

  2. An Evaluative Case Study on Professional Competency of Preservice Information Technology Teachers

    Science.gov (United States)

    Kabakci Yurdakul, Isil

    2011-01-01

    The purpose of this study is to evaluate preservice Information Technology (IT) teachers' professional competency in the teaching process. The study was designed on the basis of evaluative case study. The participants of the study consisted of seven preservice IT teachers attending the department of Computer Education and Instructional…

  3. Technological Diversity: A Case Study into Language Learners' Mobile Technology Use Inside and Outside the Classroom

    Science.gov (United States)

    Brick, Billy; Cervi-Wilson, Tiziana

    2015-01-01

    The speed of technological advance in the mobile phone, netbook and tablet markets has meant that learners increasingly have access to digital devices capable of enhancing their learning experience. This case study reports on how language learners, taking Italian as an option on the Institution Wide Languages Programme (IWLP) at Coventry…

  4. Expanding the classroom with educational technology: A case study of a Cuban polytechnic high school

    Directory of Open Access Journals (Sweden)

    Anne Leftwich

    2014-12-01

    Full Text Available Polytechnic instruction has a common place in the Cuban education system (Gasperini, 2000. In polytechnic institutions, teachers leverage technological tools to prepare students for labor market competences. This case study examined a polytechnic institution in Cuba to consider how teachers defined educational technology. Based on teacher questionnaire responses, site-based teacher interviews, and field observations, technology was primarily viewed as a method for student preparation. In other words, teachers used technology to prepare students for their future careers and the technology they will need to be successful in that career. The study found that teachers highly valued their technical pedagogical training, believed that the growing spaces were an integral part of their technology based instruction, and claimed that the limited resources was their greatest barrier to integrating ICT in the classroom.

  5. Modern standardization case studies at the crossroads of technology, economics, and politics

    CERN Document Server

    Schneiderman, R

    2015-01-01

    Modern Standardization -- Case Studies at the Crossroads of Technology, Economics, and Politics covers the development of new technical standards, how these standards are typically triggered, and how they are submitted to standards development organizations (SDOs) for review and evaluation. It fills the gap in the shortage of reference material in the development of real-world standards. The increasing pace of innovation in technology has accelerated the competitive nature of standardization, particularly in emerging markets. Modern Standardization addresses these and other issues through a series of case studies in a format designed for academics and their engineering, business, and law school students.

  6. Providing Appropriate Technology for Emerging Markets: Case Study on China’s Solar Thermal Industry

    Directory of Open Access Journals (Sweden)

    Jianghua Zhou

    2017-01-01

    Full Text Available Building on a case study of five Chinese solar thermal companies and one association, our study aims to understand how the innovator’s choices regarding the use of technology and organizational practices for new product development enable companies to design and diffuse appropriate technology in emerging markets. The study uncovers two critical factors that enhance the appropriateness of technology: redefining the identity of technology and building a local supply system. Our analysis shows that synergic innovation in both architecture and component leads to the appropriate functionalities desired by emerging markets. Moreover, modular design and the building of a local supply system enhance the process appropriateness of technology. Our study provides an empirical basis for advocating going beyond minor adaptations of existing products to creating appropriate technology for emerging markets, and extends our understandings of the upstream process of designing appropriate technology. Moreover, the emphasis on the local supply system reflects a holistic framework for shaping and delivering appropriate technology, expanding the existing research focus on the perspective of the technology itself. Our research also has managerial implications that may help firms tap into emerging markets.

  7. Renewable energy technology portfolio planning with scenario analysis: A case study for Taiwan

    International Nuclear Information System (INIS)

    Chen, T.-Y.; Yu, Oliver S.; Hsu, George Jyh-yih; Hsu, Fang-Ming; Sung, W.-N.

    2009-01-01

    This paper presents the results of a case study of applying a systematic and proven process of technology portfolio planning with the use of scenario analysis to renewable energy developments in Taiwan. The planning process starts with decision values of technology development based on a survey of society leaders. It then generates, based on expert opinions and literature search, a set of major technology alternatives, which in this study include: wind energy, photovoltaic, bio-energy, solar thermal power, ocean energy, and geothermal energy. Through a committee of technical experts with diversified professional backgrounds, the process in this study next constructs three scenarios ('Season in the Sun', 'More Desire than Energy', and 'Castle in the Air') to encompass future uncertainties in the relationships between the technology alternatives and the decision values. Finally, through a second committee of professionals, the process assesses the importance and risks of these alternative technologies and develops a general strategic plan for the renewable energy technology portfolio that is responsive and robust for the future scenarios. The most important contributions of this paper are the clear description of the systematic process of technology portfolio planning and scenario analysis, the detailed demonstration of their application through a case study on the renewable energy development in Taiwan, and the valuable results and insights gained from the application.

  8. Commercialization of new energy technologies. Appendix A. Case study 1: central station electric power generation technologies

    International Nuclear Information System (INIS)

    1976-06-01

    The results of a survey on Technologies for Central Power Generation are presented. The central power generation technologies selected for consideration were: fusion; breeder reactors; solar electric (thermal); geothermal; and magnetohydrodynamics. The responses of industry executives who make key investment decisions concerning new energy technologies and who to identify the problems faced in the development and commercialization of new energy systems are presented. Evaluation of these responses led to the following recommendations: increase industry input into the R, D and D planning process; establish and advocate priorities for new technologies based on detailed analysis of a technology's value in terms of overall national goals; create a mechanism for a joint ERDA/industry appraisal of priorities and programs; increase level of federal funding or subsidy of new technology demonstrations; and focus the activities of the national laboratories on basic research and very early product development; and emphasize industry involvement in systems development

  9. Blind Technology Transfer or Technological Knowledge Leakage: a Case Study from the South

    Directory of Open Access Journals (Sweden)

    Dario Codner

    2012-07-01

    Full Text Available Blurring boundaries between science and technology is a new phenomenon especially in fields such as biotechnology. The present work shows the fate of biotech research papers on foreign patents produced during the last decade in Quilmes National University. It aims at recognizing the flow of scientific knowledge developed at a public university towards foreign companies and organizations as well as reflecting on its technological value, the role of technology transfer management, the institutional significance of technology transfer processes and the need to develop innovative public policies for solving structural failures caused by industrial underdevelopment

  10. CASING DRILLING TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Nediljka Gaurina-Međimurec

    2005-12-01

    Full Text Available Casing drilling is an alternative option to conventional drilling and uses standard oilfield casing instead of drillstring. This technology is one of the greatest developments in drilling operations. Casing drilling involves drilling and casing a well simultaneously. In casing driling process, downhole tools can be retrieved, through the casing on wire-line, meaning tool recovery or replacement of tools can take minutes versus hours under conventional methods. This process employs wireline-retrievable tools and a drill-lock assembly, permitting bit and BHA changes, coring, electrical logging and even directional or horizontal drilling. Once the casing point is reached, the casing is cemented in place without tripping pipe.

  11. Student Teachers of Technology and Design into Industry: A Northern Ireland Case Study

    Science.gov (United States)

    Gibson, Ken

    2013-01-01

    This paper, based in Northern Ireland, is a case study of an innovative programme which places year 3 B.Ed. post-primary student teachers of Technology and Design into industry for a five-day period. The industrial placement programme is set in an international context of evolving pre-service field placements and in a local context defined by the…

  12. Case Study: Employee Use of Information and Communication Technologies in a Healthcare Organization

    Science.gov (United States)

    Aponte, Jorge I.

    2011-01-01

    This qualitative case study explored the employee use of information and communication technologies (ICT) in a southern Puerto Rico healthcare organization. Thirty-two employees of a southern Puerto Rico healthcare organization provided their perspectives regarding their use of ICT in the workplace. The findings distinguished how employees use ICT…

  13. Autistic Spectrum Disorder and Assistive Technology: Action Research Case Study of Reading Supports

    Science.gov (United States)

    Lindsey, Pam

    2012-01-01

    This descriptive action research experience with case study procedures examined the use of best practices paired with assistive technologies as interventions to individualize fiction reading instruction for a high-functioning elementary student, JB (pseudonym), diagnosed with autistic spectrum disorder. JB's instructional, reading goals were to…

  14. The Contributions of Digital Communications Technology to Human Rights Education: A Case Study of Amnesty International

    Science.gov (United States)

    Norlander, Rebecca Joy

    2013-01-01

    This dissertation addresses the need for critical assessment and evaluation of human rights education (HRE) programs and activities, especially newer initiatives that incorporate the use of digital information and communications technology (ICT). It provides an in-depth case study of the use of digital ICT in Amnesty International's HRE efforts,…

  15. Resource Communication Technology and Marketing of Textile Products: A U.S. Textile Industry Case Study

    Science.gov (United States)

    Baah, Anthony

    2010-01-01

    The purpose of the qualitative positivistic case study was to explore whether resource communication technology has helped or would help the marketing of textile products in the U.S. textile industry. The contributions of human capital in the marketing department, the marketing-demand information system function, and the product supply chain…

  16. Infusing Technology Driven Design Thinking in Industrial Design Education: A Case Study

    Science.gov (United States)

    Mubin, Omar; Novoa, Mauricio; Al Mahmud, Abdullah

    2017-01-01

    Purpose: This paper narrates a case study on design thinking-based education work in an industrial design honours program. Student projects were developed in a multi-disciplinary setting across a Computing and Engineering faculty that allowed promoting technologically and user-driven innovation strategies. Design/methodology/approach: A renewed…

  17. Case Study on the Impact of Technology on Incivility in Higher Education

    Science.gov (United States)

    Bartlett, Michelle E.; Bartlett, James E.

    2016-01-01

    A qualitative case study research design provided an in-depth perspective of the participants in relation to understanding the holistic impact technology has on the incivility of student-to-student and student-to-faculty interactions in higher education. The conceptual framework by Twale and Deluca (2008), based upon Salin's (2003) proposed model…

  18. Foresight Study on the Risk Governance of New Technologies: The Case of Nanotechnology.

    Science.gov (United States)

    Read, Sheona A K; Kass, Gary S; Sutcliffe, Hilary R; Hankin, Steven M

    2016-05-01

    Technology-led innovation represents an important driver of European economic and industrial competitiveness and offers solutions to societal challenges. In order to facilitate responsible innovation and public acceptance, a need exists to identify and implement oversight approaches focused on the effective risk governance of emerging technologies. This article describes a foresight study on the governance of new technologies, using nanotechnology as a case example. Following a mapping of the governance landscape, four plausible foresight scenarios were developed, capturing critical uncertainties for nanotechnology governance. Key governance elements were then stress tested within these scenarios to see how well they might perform in a range of possible futures and to inform identification of the strengths, weaknesses, opportunities, and threats for nanotechnology governance in Europe. Based on the study outcomes, recommendations are proposed regarding the development of governance associated with the responsible development of new technologies. © 2015 Society for Risk Analysis.

  19. Strategies for Integrating Emerging Technologies: Case Study of an Online Educational Technology Master's Program

    Science.gov (United States)

    Czerkawski, Betul C.

    2013-01-01

    Emerging technologies do not necessarily facilitate or advance learning processes; teaching strategies that are used in the learning process, integration and incorporation methods do. In online instruction, research shows that "effective distance education depends on the provision of pedagogical excellence" (Bernard et al., 2004, p.413).…

  20. Using the Case Study Technology in Developing the Students’ Environmental Competence

    Directory of Open Access Journals (Sweden)

    S. B. Ignatov

    2012-01-01

    Full Text Available The case study technology is considered to be an effective tool for developing the students’ environmental competence. Numerous modern interactive techniques, facilitating the competence approach, can be fitted into its framework. The essence of the case-study is defined as the teaching method of problem-solving. The technology in question makes it possible to use the so called triad of «training – education – development», and provides such teaching opportunities as streaming the students according to their interests, skills, abilities and psychological peculiarities; and, therefore, assigning the relevant and motivating individual tasks.The paper traces the history of the case-study, as well as some theoretical and methodological aspects of its implementation in teaching process; the pedagogic goals fulfilled by means of the given technology are listed along with its advantages compared to other methods. The «case-study» term, its structure and working algorithms are defined. The application examples relating to environmental education at different levels are given. 

  1. How to Create Business Value through Information Technology (A Case Study on Automotive Production

    Directory of Open Access Journals (Sweden)

    Kamran Feizi

    2018-03-01

    Full Text Available This study aimed at designing information technology business value model in order to explain the value of information technology in business and evaluate information technology contribution in organization function. For the purpose of a comprehensive analysis of the subject using qualitative data, the research method was set to be mixed method focusing on qualitative sequential design. The first stage of the research strategy was an exploratory single case study and for the second phase, the researchers used focus groups design. Saipa Corporation, one of the most famous firms in Iranian automotive industry, was selected as the case. The varied qualitative date were gathered through interview, document review and observation methods and were analyzed afterwards. Ultimately, the findings of the study highlighted the items and dimensions of information technology business value. This model is composed of the relationship between different dimensions of the theoretical models regarding and the share of information technology in building a business. In order to ensure research generalizability, the results of the research were compared with those in the literature review and the theoretic adequacy of the proposed framework was confirmed.

  2. Development of a Technology Transfer Score for Evaluating Research Proposals: Case Study of Demand Response Technologies in the Pacific Northwest

    Science.gov (United States)

    Estep, Judith

    researcher and recipient relationship, specific to technology transfer. In this research, the evaluation criteria of several research organizations were assessed to understand the extent to which the success attributes that were identified in literature were considered when reviewing research proposals. While some of the organizations included a few of the success attributes, none of the organizations considered all of the attributes. In addition, none of the organizations quantified the value of the success attributes. The effectiveness of the model relies extensively on expert judgments to complete the model validation and quantification. Subject matter experts ranging from senior executives with extensive experience in technology transfer to principal research investigators from national labs, universities, utilities, and non-profit research organizations were used to ensure a comprehensive and cross-functional validation and quantification of the decision model. The quantified model was validated using a case study involving demand response (DR) technology proposals in the Pacific Northwest. The DR technologies were selected based on their potential to solve some of the region's most prevalent issues. In addition, several sensitivity scenarios were developed to test the model's response to extreme case scenarios, impact of perturbations in expert responses, and if it can be applied to other than demand response technologies. In other words, is the model technology agnostic? In addition, the flexibility of the model to be used as a tool for communicating which success attributes in a research proposal are deficient and need strengthening and how improvements would increase the overall technology transfer score were assessed. The low scoring success attributes in the case study proposals (e.g. project meetings, etc.) were clearly identified as the areas to be improved for increasing the technology transfer score. As a communication tool, the model could help a research

  3. An Orchestrating Evaluation of Complex Educational Technologies: a Case Study of a CSCL System

    Directory of Open Access Journals (Sweden)

    Luis P. Prieto

    2014-06-01

    Full Text Available As digital technologies permeate every aspect of our lives, the complexity of the educational settings, and of the technological support we use within them, unceasingly rises. This increased complexity, along with the need for educational practitioners to apply such technologies within multi-constraint authentic settings, has given rise to the notion of technology-enhanced learning practice as “orchestration of learning”. However, at the same time, the complexity involved in evaluating the benefits of such educational technologies has also increased, prompting questions about the way evaluators can cope with the different places, technologies, informants and issues involved in their evaluation activity. By proposing the notion of “orchestrating evaluation”, this paper tries to reconcile the often disparate “front office accounts” of research publications and the “shop floor practice” of evaluation of educational technology, through the case study of evaluating a system to help teachers in coordinating computer-supported collaborative learning (CSCL scenarios. We reuse an internationally-evaluated conceptual framework of “orchestration aspects” (design, management, adaptation, pragmatism, etc. to structure the case‟s narrative, showing how the original evaluation questions and methods were modulated in the face of the multiple (authentic evaluation setting constraints.

  4. Peace Corps Water/Sanitation Case Studies and Analyses. Appropriate Technologies for Development. Case Study CS-4.

    Science.gov (United States)

    Talbert, Diana E., Comp.

    This document provides an overview of Peace Corps water and sanitation activities, five case studies (Thailand, Yemen, Paraguay, Sierra Leone, and Togo), programming guidelines, and training information. Each case study includes: (1) background information on the country's geography, population, and economics; (2) information on the country's…

  5. IMPORTANCE OF CONTEXTUAL DATA IN PRODUCING HEALTH TECHNOLOGY ASSESSMENT RECOMMENDATIONS: A CASE STUDY.

    Science.gov (United States)

    Poder, Thomas G; Bellemare, Christian A

    2018-01-01

    Contextual data and local expertise are important sources of data that cannot be ignored in hospital-based health technology assessment (HTA) processes. Despite a lack of or unconvincing evidence in the scientific literature, technology can be recommended in a given context. We illustrate this using a case study regarding biplane angiography for vascular neurointervention. A systematic literature review was conducted, along with an analysis of the context in our setting. The outcomes of interest were radiation doses, clinical complications, procedure times, purchase cost, impact on teaching program, the confidence of clinicians in the technology, quality of care, accessibility, and the volume of activity. A committee comprising managers, clinical experts, physicians, physicists and HTA experts was created to produce a recommendation regarding biplane technology acquisition to replace a monoplane device. The systematic literature review yielded nine eligible articles for analysis. Despite a very low level of evidence in the literature, the biplane system appears to reduce ionizing radiation and medical complications, as well as shorten procedure time. Contextual data indicated that the biplane system could improve operator confidence, which could translate into reduced risk, particularly for complex procedures. In addition, the biplane system can support our institution in its advanced procedures teaching program. Given the advantages provided by the biplane technology in our setting, the committee has recommended its acquisition. Contextual data were of utmost importance in this recommendation. Moreover, this technology should be implemented alongside a responsibility to collect outcome data to optimize clinical protocol in the doses of ionizing delivered.

  6. The Role of Information Systems and Technology in Case Management: a case study in health and welfare insurance

    Directory of Open Access Journals (Sweden)

    Helen Richardson

    2003-05-01

    Full Text Available This study reports the role of information system and technology (IST in supporting case management at the Accident Compensation Corporation (ACC of New Zealand. Case management is a managerial approach that seeks to gain improved business performance by enhancing both employee and customer satisfaction. Despite millions of dollars spent annually by health, social, and insurance agencies in automating case management, little research has been conducted into the role of IST in this practice. The findings of this study show that for ACC, IST’s most valuable role is enhancing the relationship between client and case manager rather than replacing it for, even after the addition of IST, the most valuable knowledge continues to accrue from the face to face interaction of client and case manager. The findings also show two distinct phases to the development of case managers as knowledge workers. The first phase focuses on control of the processes and the second on the delivery and sharing of information resources.

  7. Modern Wildlife Monitoring Technologies: Conservationists versus Communities? A Case Study: The Terai-Arc Landscape, Nepal

    Directory of Open Access Journals (Sweden)

    Yashaswi Shrestha

    2018-01-01

    Full Text Available The use of new and advanced wildlife monitoring technologies is shifting the paradigm of wildlife conservation and management. These digital technologies are helping wildlife conservationists and researchers around the world to monitor and manage wildlife with more precision and efficiency. However, this research study highlights some of the key drawbacks of using such modern technologies for wildlife conservation and management especially in developing countries, where the digital divide often clearly separates well-endowed conservation organisations and rural communities. It provides an insight into how the extensive use of such digital wildlife monitoring technologies can often marginalise the role of local and indigenous communities in wildlife management. Our case study, which was conducted in the Terai Arc Landscape (TAL in southern Nepal, includes interviews with several wildlife experts, biologists, and members of local and indigenous communities. Findings indicate that the increasing militarisation and centralisation of protected area management, and the lack of universal access to the information gathered using modern monitoring technologies, have notably led to the marginalisation of local and indigenous communities in the region. These developments not only undermine the benefits of using such technologies but have also caused a rift between conservation organisations and local communities. As a result, this research study recommends that conservation organisations who advocate for the use of such technologies need to hold consultations and dialogues between conservationists and local and indigenous community members in order to be more inclusive and allow for a cross cultural and an interdisciplinary understanding of the best practices for the conservation and management of wildlife.

  8. Combined heat and power in Dutch greenhouses: A case study of technology diffusion

    International Nuclear Information System (INIS)

    Veen, Reinier A.C. van der; Kasmire, Julia

    2015-01-01

    This paper presents a case study of the rapid diffusion of combined heat and power (CHP) units through the Dutch greenhouse horticulture sector between 2003 and 2009 in order to gain new insights regarding technology transitions. We present a sectoral diffusion analysis framework, which we apply to identify and examine developments in technical, economic, institutional, cultural and ecological domains that all contributed to an emergent and thorough CHP diffusion in the Dutch greenhouse sector. Five identified key drivers behind the CHP diffusion are the opening of the energy market in 2002, the high spark spread during the transition period, the compatibility of output of a CHP unit with greenhouse demand, the flexibility provided by heat buffers, and the cooperative and competitive greenhouse sector culture. We conclude that policies to stimulate or steer technology diffusion will benefit from an in-depth analysis of domain interactions and company decision-making processes. Such an in-depth analysis makes for well informed and targeted policies that are better able to steer an industrial sector effectively and in a socially desired direction. - Highlights: • We present a sectoral diffusion analysis framework. • We describe the case of the diffusion of cogeneration (CHP) in Dutch greenhouses. • We extract five key drivers of CHP diffusion in the Dutch greenhouse sector. • The case shows how technology diffusion emerges from co-evolutionary mechanisms. • We conclude that a co-evolutionary sectoral analysis will inform innovation policy.

  9. Transition Management: Case Study of an Energy Efficiency Technology Roadmap in Turkey

    Directory of Open Access Journals (Sweden)

    Şiir Kilkiş

    2014-12-01

    Full Text Available This paper integrates several streams of literature in transition management and proposes a holistic framework for its application in policy-making. Separate fields of study, such as motors of change and strategic intelligence tools, are unified in a single analytical process. The process involves five steps that may be repeated until a desired policy objective is achieved. The pilot, integrated technology roadmap process that has been launched in Turkey is analyzed as a case study. The Energy Efficiency Technology Roadmap has been completed with the participation of over 160 experts in 5 different stages. It involved the collection of over 349 Delfi statements, their consolidation for a Delfi survey with 16 statements, the analysis of the results, a focal group meeting to develop roadmaps for the 7 selected goals, and the consultation of the roadmaps to the sector. The paper concludes that an integrated technology roadmap process, as described in the pilot case study, provides an advanced version of transition management, which is needed to mobilize research, development, and innovation for sustainable development.

  10. Promoting community socio-ecological sustainability through technology: A case study from Chile

    Science.gov (United States)

    Aguayo, Claudio; Eames, Chris

    2017-12-01

    The importance of community learning in effecting social change towards ecological sustainability has been recognised for some time. More recently, the use of Information and Communication Technology (ICT) tools to promote socio-ecological sustainability has been shown to have potential in community education for sustainable development (ESD). The effective design and use of technology for community learning implies an understanding of a range of cross-dimensional factors including: socio-cultural characteristics and needs of the target audience; considerations of available and culturally responsive types of technology; and non-formal pedagogical ESD strategies for community empowerment. In addition, both technology itself and social communities are dynamically evolving and complex entities. This article presents a case study which evaluated the potential of ICT for promoting ecological literacy and action competence amongst community members in southern Chile. The case study addressed the ecological deterioration of a lake, which is having deep social, economic, recreational and cultural implications locally. The authors' research involved developing a theoretical framework for the design, implementation and use of ICT for community learning for sustainability. The framework was based on key ideas from ESD, ICT and community education, and was underpinned by a systems thinking approach to account for the dynamism and complexity of such settings. Activity theory provided a frame to address overarching socio-cultural elements when using technology as a mediating tool for community learning. The authors' findings suggest that the use of an ICT tool, such as a website, can enhance ecological literacy in relation to a local socio-ecological issue.

  11. Enhancing economic competiveness of dish Stirling technology through production volume and localization: Case study for Morocco

    Science.gov (United States)

    Larchet, Kevin; Guédez, Rafael; Topel, Monika; Gustavsson, Lars; Machirant, Andrew; Hedlund, Maria-Lina; Laumert, Björn

    2017-06-01

    The present study quantifies the reduction in the levelized cost of electricity (LCoE) and capital expenditure (CAPEX) of a dish Stirling power plant (DSPP) through an increase in localization and unit production volume. Furthermore, the localization value of the plant is examined to determine how much investment is brought into the local economy. Ouarzazate, Morocco, was chosen as the location of the study due to the country's favorable regulatory framework with regards to solar power technologies and its established industry in the concentrating solar power (CSP) field. A detailed techno-economic model of a DSPP was developed using KTH's in-house modelling tool DYESOPT, which allows power plant evaluation by means of technical and economic performance indicators. Results on the basis of LCoE and CAPEX were compared between two different cases of production volume, examining both a minimum and maximum level of localization. Thereafter, the DSPP LCoE and localization value were compared against competing solar technologies to evaluate its competitiveness. In addition, a sensitivity analysis was conducted around key design parameters. The study confirms that the LCoE of a DSPP can be reduced to values similar to solar photovoltaic (PV) and lower than other CSP technologies. Furthermore, the investment in the local economy is far greater when compared to PV and of the same magnitude to other CSP technologies. The competiveness of a DSPP has the potential to increase further when coupled with thermal energy storage (TES), which is currently under development.

  12. Big Data technology in traffic: A case study of automatic counters

    Directory of Open Access Journals (Sweden)

    Janković Slađana R.

    2016-01-01

    Full Text Available Modern information and communication technologies together with intelligent devices provide a continuous inflow of large amounts of data that are used by traffic and transport systems. Collecting traffic data does not represent a challenge nowadays, but the issues remains in relation to storing and processing increasing amounts of data. In this paper we have investigated the possibilities of using Big Data technology to store and process data in the transport domain. The term Big Data refers to a large volume of information resource, its velocity and variety, far beyond the capabilities of commonly used software for storing, processing and data management. In our case study, Apache™ Hadoop® Big Data was used for processing data collected from 10 automatic traffic counters set up in Novi Sad and its surroundings. Indicators of traffic load which were calculated using the Big Data platforms were presented using tables and graphs in Microsoft Office Excel tool. The visualization and geolocation of the obtained indicators were performed using the Microsoft Business Intelligence (BI tools such as: Excel Power View and Excel Power Map. This case study showed that Big Data technologies combined with the BI tools can be used as a reliable support in monitoring of the traffic management systems.

  13. 16 case studies on the deployment of photovoltaic technologies in developing countries

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-09-15

    This report for the International Energy Agency (IEA) made by Task 9 of the Photovoltaic Power Systems (PVPS) programme presents 16 Case Studies on the deployment of photovoltaic technologies in developing countries. This guide provides information for all decision-makers in developing countries involved in the process of developing a PV project. These decision-makers can be found in institutions and host governments and also include PV project developers and sponsors, PV producers and suppliers, entrepreneurs, and NGOs. The case studies presented can help such decision-makers learn from past experience gained in the deployment of PV systems. They include experience gained in PV-related projects in various countries, including electrification, water desalination and solar home systems. Financing issues are, of course, also addressed.

  14. Modeling and processing for next-generation big-data technologies with applications and case studies

    CERN Document Server

    Barolli, Leonard; Barolli, Admir; Papajorgji, Petraq

    2015-01-01

    This book covers the latest advances in Big Data technologies and provides the readers with a comprehensive review of the state-of-the-art in Big Data processing, analysis, analytics, and other related topics. It presents new models, algorithms, software solutions and methodologies, covering the full data cycle, from data gathering to their visualization and interaction, and includes a set of case studies and best practices. New research issues, challenges and opportunities shaping the future agenda in the field of Big Data are also identified and presented throughout the book, which is intended for researchers, scholars, advanced students, software developers and practitioners working at the forefront in their field.

  15. Managing Returnable Containers Logistics - A Case Study Part II - Improving Visibility through Using Automatic Identification Technologies

    Directory of Open Access Journals (Sweden)

    Gretchen Meiser

    2011-05-01

    Full Text Available This case study is the result of a project conducted on behalf of a company that uses its own returnable containers to transport purchased parts from suppliers. The objective of this project was to develop a proposal to enable the company to more effectively track and manage its returnable containers. The research activities in support of this project included (1 the analysis and documentation of the physical flow and the information flow associated with the containers and (2 the investigation of new technologies to improve the automatic identification and tracking of containers. This paper explains the automatic identification technologies and important criteria for selection. A companion paper details the flow of information and containers within the logistics chain, and it identifies areas for improving the management of the containers.

  16. CONTRIBUTIONS OF CAD / CAE TECHNOLOGY IN DEVELOPMENT PROJECTS OF AGRICULTURAL MACHINERY AND IMPLEMENTS: A CASE STUDY

    Directory of Open Access Journals (Sweden)

    Flavio Ricci Martinez

    2017-12-01

    Full Text Available This work aims to understand the contributions of CAD / CAE technology development projects Agricultural Machinery and Implements. The segment of Agricultural Machinery and Implements part of capital goods, which provides items that will be used to produce goods and services in other sectors and that is strategic in many economically and for innovation and technological diffusion in the country sector. To achieve the proposed objective a case study was conducted at a manufacturer of this type of product (combines, planters, tractors, etc. located in the region of Ribeirão Preto. Among the main contributions can excel found to reduce the time and costs of the project, the largest customer interaction, integration with the staff and the increased ability to test alternative solutions for solving problems.

  17. TELECOMMUTING AND HRM: A CASE STUDY OF AN INFORMATION TECHNOLOGY SERVICE PROVIDER

    Directory of Open Access Journals (Sweden)

    André Fernandes Bernardino

    2012-08-01

    Full Text Available With the development in information technology resources, a way of working has been standing out: telecommuting. This manner of working from a distance may offer a competitive advantage in attracting and retaining highly skilled professionals. The purpose of the research presented in this article is to identify guidelines for the implementation and management of telecommuting, as an alternative to overcome the shortage of qualified professionals in Information Technology (IT. The results, based on a case study of a Brazilian subsidiary of a multinational organization that provides IT services, shown that telecommuting (1 contributes to attracting and retaining qualified professionals in IT, (2 should be based on trustworthy relationships, (3 has to be supported by a strategy of decentralization of both structure and organizational assets.

  18. Research and technology management in the electricity industry methods, tools and case studies

    CERN Document Server

    Daim, Tugrul; Kim, Jisun

    2013-01-01

    Technologies such as renewable energy alternatives including wind, solar and biomass, storage technologies and electric engines are creating a different landscape for the  electricity industry. Using sources and ideas from technologies such as renewable energy alternatives, Research and Technology Management in the Electricity Industry explores a different landscape for this industry and applies it to the electric industry supported by real industry cases. Divided into three sections, Research and Technology Management in the Electricity Industry introduces a range of  methods and tools includ

  19. A Case Study of Policies and Procedures to Address Cyberbullying at a Technology-Based Middle School

    Science.gov (United States)

    Tate, Bettina Polite

    2017-01-01

    This qualitative case study explored the policies and procedures used to effectively address cyberbullying at a technology-based middle school. The purpose of the study was to gain an in-depth understanding of policies and procedures used to address cyberbullying at a technology-based middle school in the southern United States. The study sought…

  20. Exploring resistance to implementation of welfare technology in municipal healthcare services – a longitudinal case study

    Directory of Open Access Journals (Sweden)

    Etty R. Nilsen

    2016-11-01

    Full Text Available Abstract Background Industrialized and welfare societies are faced with vast challenges in the field of healthcare in the years to come. New technological opportunities and implementation of welfare technology through co-creation are considered part of the solution to this challenge. Resistance to new technology and resistance to change is, however, assumed to rise from employees, care receivers and next of kin. The purpose of this article is to identify and describe forms of resistance that emerged in five municipalities during a technology implementation project as part of the care for older people. Methods This is a longitudinal, single-embedded case study with elements of action research, following an implementation of welfare technology in the municipal healthcare services. Participants included staff from the municipalities, a network of technology developers and a group of researchers. Data from interviews, focus groups and participatory observation were analysed. Results Resistance to co-creation and implementation was found in all groups of stakeholders, mirroring the complexity of the municipal context. Four main forms of resistance were identified: 1 organizational resistance, 2 cultural resistance, 3 technological resistance and 4 ethical resistance, each including several subforms. The resistance emerges from a variety of perceived threats, partly parallel to, partly across the four main forms of resistance, such as a threats to stability and predictability (fear of change, b threats to role and group identity (fear of losing power or control and c threats to basic healthcare values (fear of losing moral or professional integrity. Conclusion The study refines the categorization of resistance to the implementation of welfare technology in healthcare settings. It identifies resistance categories, how resistance changes over time and suggests that resistance may play a productive role when the implementation is organized as a co

  1. Exploring resistance to implementation of welfare technology in municipal healthcare services - a longitudinal case study.

    Science.gov (United States)

    Nilsen, Etty R; Dugstad, Janne; Eide, Hilde; Gullslett, Monika Knudsen; Eide, Tom

    2016-11-15

    Industrialized and welfare societies are faced with vast challenges in the field of healthcare in the years to come. New technological opportunities and implementation of welfare technology through co-creation are considered part of the solution to this challenge. Resistance to new technology and resistance to change is, however, assumed to rise from employees, care receivers and next of kin. The purpose of this article is to identify and describe forms of resistance that emerged in five municipalities during a technology implementation project as part of the care for older people. This is a longitudinal, single-embedded case study with elements of action research, following an implementation of welfare technology in the municipal healthcare services. Participants included staff from the municipalities, a network of technology developers and a group of researchers. Data from interviews, focus groups and participatory observation were analysed. Resistance to co-creation and implementation was found in all groups of stakeholders, mirroring the complexity of the municipal context. Four main forms of resistance were identified: 1) organizational resistance, 2) cultural resistance, 3) technological resistance and 4) ethical resistance, each including several subforms. The resistance emerges from a variety of perceived threats, partly parallel to, partly across the four main forms of resistance, such as a) threats to stability and predictability (fear of change), b) threats to role and group identity (fear of losing power or control) and c) threats to basic healthcare values (fear of losing moral or professional integrity). The study refines the categorization of resistance to the implementation of welfare technology in healthcare settings. It identifies resistance categories, how resistance changes over time and suggests that resistance may play a productive role when the implementation is organized as a co-creation process. This indicates that the importance of

  2. The habitus and technological practices of rural students: a case study

    African Journals Online (AJOL)

    This student is one of five self-declared rural students, from a group of 23 ... not a unique local problem: research from other countries has shown that students from ..... case. Rural students feel estranged and depressed by these technologies.

  3. Training to use a commercial brain-computer interface as access technology: a case study.

    Science.gov (United States)

    Taherian, Sarvnaz; Selitskiy, Dmitry; Pau, James; Davies, T Claire; Owens, R Glynn

    2016-01-01

    This case study describes how an individual with spastic quadriplegic cerebral palsy was trained over a period of four weeks to use a commercial electroencephalography (EEG)-based brain-computer interface (BCI). The participant spent three sessions exploring the system, and seven sessions playing a game focused on EEG feedback training of left and right arm motor imagery and a customised, training game paradigm was employed. The participant showed improvement in the production of two distinct EEG patterns. The participant's performance was influenced by motivation, fatigue and concentration. Six weeks post-training the participant could still control the BCI and used this to type a sentence using an augmentative and alternative communication application on a wirelessly linked device. The results from this case study highlight the importance of creating a dynamic, relevant and engaging training environment for BCIs. Implications for Rehabilitation Customising a training paradigm to suit the users' interests can influence adherence to assistive technology training. Mood, fatigue, physical illness and motivation influence the usability of a brain-computer interface. Commercial brain-computer interfaces, which require little set up time, may be used as access technology for individuals with severe disabilities.

  4. The Modified Technology Acceptance Model for Private Clinical Physicians: A Case Study in Malaysia, Penang

    OpenAIRE

    Annie Ng Cheng San; Choy Johnn Yee

    2013-01-01

    Malaysia’s private clinic is wealth creator. To enhance its sustainable future, healthcare Information Technology (IT) change is inevitable. However, its’ IT acceptance is limited. The past literatures showed physicians have different technology acceptance decision as compare to common users. Hence, understanding the physicians’ technology acceptance is critical for technology management success. This study aims to gauge the factors influence technology acceptance decision among the physician...

  5. Integration of health technology assessment recommendations into organizational and clinical practice: A case study in Catalonia.

    Science.gov (United States)

    Gagnon, Marie-Pierre; Sánchez, Emília; Pons, Joan M V

    2006-01-01

    Evaluating the impact of recommendations based upon health technology assessment (HTA) represents a challenge for both HTA agencies and healthcare policy makers. This research sought to understand factors affecting the uptake of HTA recommendations to support decision making with respect to the introduction of three health technologies. Using a multidimensional framework, based upon a combination of theoretical models, a case study was conducted. A total of twenty-eight semistructured interviews were done with physicians from fifteen hospitals and other stakeholders in Catalonia. Interview content was analyzed iteratively and classified according to theoretical dimensions and contextual factors. At the sociopolitical level, factors related to the organization and financing of the health system were found to affect the utilization of HTA recommendations. At the healthcare organization level, existing collaborations between the hospital and the HTA agency favored the integration of recommendations into practices. Formalism in the organization also influenced the utilization of HTA recommendations. At the professional level, the high degree of autonomy of specialists, the importance of peers and collegial control, and the definition of professional roles and responsibilities influenced physicians' willingness to integrate HTA recommendations into their practice. This study offers a comprehensive framework to understand the complex dynamics that affect adoption of health technologies in organizational and professional practices. The findings suggest some avenues to promote the integration of HTA recommendations into practices and, thus, increase the utilization of scientific evidence to support decision making in health care.

  6. Enabling frameworks for low-carbon technology transfer to small emerging economies: Analysis of ten case studies in Chile

    International Nuclear Information System (INIS)

    Pueyo, Ana

    2013-01-01

    Technology transfer is crucial to reduce the carbon intensity of developing countries. Enabling frameworks need to be in place to allow foreign technologies to flow, to be absorbed and to bring about technological change in the recipient country. This paper contributes to identifying these enabling factors by analysing 10 case studies of low-carbon technology transfer processes based in Chile. Our findings show the importance of strong economic and institutional fundamentals, a sound knowledge base, a sizable and stable demand and a functioning local industry. Policy recommendations are derived to improve the penetration of foreign low-carbon technologies in developing countries, focusing on the particularities of small and medium emerging economies. - Highlights: ► We analyse 10 case studies of low carbon technology transfer to Chile. ► We identify enablers of technology transfer to developing countries. ► We provide policy recommendations focusing on small and medium economies.

  7. Describing an Environment for a Self-Sustaining Technology Transfer Service in a Small Research Budget University: A Case Study

    Science.gov (United States)

    Nieb, Sharon Lynn

    2014-01-01

    This single-site qualitative study sought to identify the characteristics that contribute to the self sustainability of technology transfer services at universities with small research budgets through a case study analysis of a small research budget university that has been operating a financially self-sustainable technology transfer service for…

  8. Power Factor Study Reduces Energy Costs at Aluminum Extrusion Plant: Office of Industrial Technologies (OIT) BestPractices Aluminum Technical Case Study

    International Nuclear Information System (INIS)

    2001-01-01

    This case study is the latest in a series on industrial firms who are implementing energy efficient technologies and system improvements into their manufacturing processes. The case studies document the activities, savings, and lessons learned on these projects

  9. Technology Leadership of Education Administrators and Innovative Technologies in Education: A Case Study of Çorum City

    Science.gov (United States)

    Kör, Hakan; Erbay, Hasan; Engin, Melih

    2016-01-01

    In this global world in which educational technologies have developed at such a great pace, it is possible to say that administrators in the education sector are obliged with serious roles with regard to keeping up with the evolving technology and the management of education in this virtual environment. In the present study utilizing screening…

  10. Elementary Principals' Strategies for Managing the Educational Technology Refresh Process: A Case Study

    Science.gov (United States)

    Denton, Edward A.

    2011-01-01

    Increased uses of educational technology by students and teachers in recent years have compelled elementary principals to expand educational technology resources and replace educational technology resources at the end of it's service life. The purpose of this study was to investigate strategies and practices employed by elementary principals…

  11. Designing for Diverse Learning: Case Study of Place-Based Learning in Design and Technologies Pre-Service Teacher Education

    Science.gov (United States)

    Best, Marnie; MacGregor, Denise; Price, Deborah

    2017-01-01

    Place-based learning experiences in Design and Technologies education connect people and place with design processes and products. Drawing on place-based learning, this case study shares the experiences of eight final year pre-service Design and Technologies education students from the University of South Australia as they collaborated with…

  12. Integrating Information and Communication Technology (ICT into University Teaching and Learning: A Case Study

    Directory of Open Access Journals (Sweden)

    Chan Yuen Fook

    2009-06-01

    Full Text Available Over the past decade the push for academics to develop competencies in the use of information and communication technologies (ICT in teaching and learning has increased. Within the Malaysian context unfortunately, until now there has not been a holistic and conclusive study on the integration of ICT in higher education. This exploratory study examined the integration of ICT among academics for the enhancement of university teaching and learning. A descriptivecorrelational research methodology that employed a survey questionnaire was used in this case study. The data was analyzed using means, standard deviation, t-test, ANOVA, and correlation. The findings indicated that the ICT facilities in the higher instituion left much to be desired and the usage of ICT in teaching among the academics was not at a satisfactory level. Even though a majority of the acdemics are aware of the many benefits of ICT there still exists academics who hold firm to the importance of face-to-face interaction and the didactic role of the instructors. The findings also revealed that the integration of ICT into the classroom focuses mainly on teaching and learning rather than the technical knowhow about computers themselves and how this technology helps support users to participate in the integration of ICT into teaching and learning. However, most of the respondents have shown a keen willingness to adopt ICT in their future teaching and learning processes once proper training and relevant technical support are provided. The findings, in general, can help lecturers, IT staff and university management to manage the integration of ICT in university teaching and learning in a more organized manner. The findings also would enable the faculty to be more responsive to the needs of staff and students to effectively address the critical problems related to the integration of technology into university teaching and learning in ways that are both contextualized and authentic.

  13. Rethinking agency and medical adherence technology: applying Actor Network Theory to the case study of Digital Pills.

    Science.gov (United States)

    Hurtado-de-Mendoza, Alejandra; Cabling, Mark L; Sheppard, Vanessa B

    2015-12-01

    Much literature surrounding medical technology and adherence posits that technology is a mechanism for social control. This assumes that the medical establishment can take away patients' agency. Although power relationships and social control can play a key role, medical technology can also serve as an agentive tool to be utilized. We (1) offer the alternative framework of Actor Network Theory to view medical technology, (2) discuss the literature on medication adherence and technology, (3) delve into the ramifications of looking at adherence as a network and (4) use Digital Pills as a case study of dispersed agency. © 2015 John Wiley & Sons Ltd.

  14. Managing Innovation in Small High-Technology Firms: A Case Study in Brazil

    Directory of Open Access Journals (Sweden)

    Mauricio Uriona Maldonado

    2009-07-01

    Full Text Available Evaluating innovation competence and practices is a significant and complex issue for many contemporary organizations and it presents itself as a challenge for forthcoming initiatives. In this article, we present the case study of a small high-technology firm. Cianet Networking is a digital communication solutions manufacturer in Brazil that went through the implementation of an innovation management assessment system. This article reports the challenges the firm faced through the diagnosing/benchmarking and action plan proposal phases as well as the challenges facing the implementation phase. This system helped the firm to understand their strengths and weaknesses as well as to establish action plans in order to achieve higher performance. Since the beginning of the implementation, the results have corroborated the firm´s positive operational outcomes.

  15. Innovations in technology and the online learning environment: A case study of inter-university collaboration

    Directory of Open Access Journals (Sweden)

    Jansen ZANETTA

    2010-01-01

    Full Text Available This paper presents a case study of online learning. It is based on the researcher’s participation in an inter-university collaborative module at two higher education institutions in South Africa and the United States from August to December 2001. The paper addresses the advantages and disadvantages of the online learning environment and learning in a Virtual Classroom. It provides a critical interpretation of the virtual classroom experienced in this collaboration between institutions. It finds that there are benefits from applying this technology in educational practices and programs particularly in the African context where a large majority of school-leaving learners have little or no access to higher education. However, it also expounds the NEPAD (New Partnership for Africa’s Development initiative to produce ICT in schools throughout Africa to fulfil the Millennium Development Goals on education in developing countries.

  16. Using information technology for an improved pharmaceutical care delivery in developing countries. Study case: Benin.

    Science.gov (United States)

    Edoh, Thierry Oscar; Teege, Gunnar

    2011-10-01

    One of the problems in health care in developing countries is the bad accessibility of medicine in pharmacies for patients. Since this is mainly due to a lack of organization and information, it should be possible to improve the situation by introducing information and communication technology. However, for several reasons, standard solutions are not applicable here. In this paper, we describe a case study in Benin, a West African developing country. We identify the problem and the existing obstacles for applying standard ECommerce solutions. We develop an adapted system approach and describe a practical test which has shown that the approach has the potential of actually improving the pharmaceutical care delivery. Finally, we consider the security aspects of the system and propose an organizational solution for some specific security problems.

  17. A case study of technology-enhanced active learning in introductory cellular biology

    Science.gov (United States)

    Chacon Diaz, Lucia Bernardette

    Science teaching and learning in higher education has been evolving over the years to encourage student retention in STEM fields and reduce student attrition. As novel pedagogical practices emerge in the college science classroom, research on the effectiveness of such approaches must be undertaken. The following research applied a case study research design in order to evaluate the experiences of college students in a TEAL classroom. This case study was conducted during the 2017 Summer Cellular and Organismal Biology course at a four-year Hispanic Serving Institution located in the Southwest region of the United States. The main components evaluated were students' exam performance, self-efficacy beliefs, and behaviors and interactions in the Technology-Enhanced Active Learning (TEAL) classroom. The findings suggest that students enrolled in a TEAL classroom are equally capable of answering high and low order thinking questions. Additionally, students are equally confident in answering high and low order thinking items related to cellular biology. In the TEAL classroom, student-student interactions are encouraged and collaborative behaviors are exhibited. Gender and ethnicity do not influence self-efficacy beliefs in students in the TEAL room, and the overall class average of self-efficacy beliefs tended to be higher compared to exam performance. Based on the findings of this case study, TEAL classrooms are greatly encouraged in science higher education in order to facilitate learning and class engagement for all students. Providing students with the opportunity to expand their academic talents in the science classroom accomplishes a crucial goal in STEM higher education.

  18. A Case Study of the Use of Internet Photobook Technology to Enhance Early Childhood "Scientist" Identity

    Science.gov (United States)

    Katz, Phyllis

    2011-10-01

    There are many influences on a child's identity. Photobook technology purposefully prepared around science explorations presents a modern opportunity to repeatedly trigger memories that reinforce the "me, as scientist" viewpoint. Semi-structured interviews at 6 and 8 years of age were conducted with a child who was the subject of a photobook of everyday science activities to gain insights into his thinking about the nature of science and how he interprets his younger self participating. Interview data were recorded, transcribed and analyzed using dimensions from the previously established parameters for the nature of science. The child's statements about his participation in the photos were matched to these dimensions to consider how he sees himself "doing science" through his early years. Preliminary findings suggest that the child recognizes elements of science and regards himself as an active participant. In both interviews, the child reinforces these views by the opportunity to revisit the experiences in the photobook. Affective components may motivate further science involvement as well: the child enjoyed the time and attention that the photos and discussion provided; the child took pride in being the subject of a book. This case study suggests that there is a fertile field of research to investigate how, for whom, and in what ways internet photobook technology may enhance a child's developing identity as capable science explorer.

  19. Teaching via Mobile Phone: a Case Study on Malaysian Teachers’ Technology Acceptance and Readiness

    OpenAIRE

    Issham Ismail; Siti F Bokhare; Siti N Azizan; Nizuwan Azman

    2013-01-01

    The purpose of this study is to identify the level of technology acceptance among school teachers from the components of awareness and motivation, training and courses, training design, and supports and facilities. This study also aims to investigate whether teachers’ acceptance of technology could influence their readiness for the pedagogical use of mobile phone technology if it is to be implemented in school. A quantitative questionnaire was administered to thirty eight teachers who teach I...

  20. Capitalizing on technology for developing communication skills in autism spectrum disorder: a single case study.

    Science.gov (United States)

    Mohan, Veena; Kunnath, Suja Kurian; Philip, Vineetha Sara; Mohan, Lakshmi Santha; Thampi, Neethu

    2017-12-15

    In this case study, we discuss the application of a patient-centred clinical approach that led to the use of an assisted communication platform to combat severe communicative deficit in a child with autism spectrum disorder (ASD). Initial assessment at four years of age revealed that the patient had rudimentary communication skills, with significant sensory integration dysfunction manifested as oral, olfactory, and tactile seeking behaviours; self-stimulatory behaviour; and complete dependence on caregiver for activities of daily living. Intensive, multi-disciplinary intervention resulted in minimal improvement in communicative skills and sensory seeking over six months. Subsequently, a tailor-made picture-assisted communication training with the mother as the communication facilitator was adopted. This approach was abandoned due to the patient's poor response and mother's low acceptance of picture-based interaction. A preference for printed material was observed in the patient. Accordingly, further management was focused on employing a computer-based interactive platform that the patient was taught to use over the course of a few months as a part of augmentative and alternative communication (AAC) intervention program. This resulted in a remarkable improvement in the child's skills that now allowed for a better intentional communication of his thoughts and needs. This study highlights the importance of revisiting conventional rehabilitation strategies for communicative deficits and tailoring them according to the patient's needs and preferences. It also emphasises that besides excellent observation skills, clinicians must be willing to consider technology based approaches in patients responding poorly to traditional approaches in order to develop effective interventional programmes. Implication for Rehabilitation The current study highlights the importance of exploring the application of technology based intervention for building communication skills in the early

  1. The koala (Phascolarctos cinereus): a case study in the development of reproductive technology in a marsupial.

    Science.gov (United States)

    Johnston, Stephen D; Holt, William V

    2014-01-01

    The successful development and application of an assisted breeding program in any animal relies primarily on a thorough understanding of the fundamental reproductive biology (anatomy, physiology and behaviour) of the species in question. Surely, the ultimate goal and greatest hallmark of such a program is the efficacious establishment of a series of reliable techniques that facilitate the reproductive and genetic management of fragmented populations, both in captivity and in the wild. Such an achievement is all the more challenging when the reproductive biology of that species is essentially rudimentary and without adequate reproductive models to compare to. Using the koala (Phascolarctos cinereus) as a case study, this chapter provides some personal insights into the evolution of a concept that began as a small undergraduate student project but that subsequently evolved into the first-ever successful artificial insemination of a marsupial. Apart from this historical perspective, we also provide a brief review of the current reproductive biology of the koala, discuss technical elements of current assisted breeding technology of this species, its potential application to the wombat, and the future role it might play in helping to conserve wild koala populations. There is little doubt that the unique reproductive biology and tractability of the koala has in this case been a benefit rather than a hindrance to the success of artificial breeding in this species.

  2. International technology transfer: building theory from a multiple case-study in the aircraft industry

    NARCIS (Netherlands)

    Steenhuis, H.J.; de Bruijn, E.J.

    2005-01-01

    International technology transfer occurs frequently in international operations, for example in cases of foreign direct investment where companies set-up existing manufacturing lines in new locations. It also occurs in situations of international outsourcing where a new supplier receives product

  3. Teaching via Mobile Phone: A Case Study on Malaysian Teachers' Technology Acceptance and Readiness

    Science.gov (United States)

    Ismail, Issham; Bokhare, Siti F.; Azizan, Siti N.; Azman, Nizuwan

    2013-01-01

    The purpose of this study is to identify the level of technology acceptance among school teachers from the components of awareness and motivation, training and courses, training design, and supports and facilities. This study also aims to investigate whether teachers' acceptance of technology could influence their readiness for the pedagogical use…

  4. Cleaner Technology in the Hard Disk Drive Manufacturing Industry: A Case Study

    Science.gov (United States)

    Moolla, Premchai; Chompu-inwai, Rungchat

    2010-10-01

    The objectives of this research are to improve raw material and energy consumption efficiency, as well as reduce defects and the use of chemicals in the arm coil assembly process of hard disk drive manufacturing in the case study company by applying the Cleaner Technology concepts. The four main sequential steps used in this research were: (1) pre-assessment, (2) assessment, (3) feasibility study, and (4) implementation. In the first step, raw data, such as process flows, raw material usage and defects data were collected. In the second step, the loss during production and causes of loss were analyzed. Opportunities to reduce raw material, chemical and energy wastage could then be recommended. The next step was to evaluate the feasibility and potential benefits of a particular Cleaner Technology opportunity. Finally, in the last step, after a thorough evaluation and implementation of the opportunities to apply Cleaner Technology, the results showed that arm coil defects could be reduced by improving the production process using the ECRS technique. ECRS stands for Eliminate, Combine, Rearrange and Simplify. This improvement reduced arm coil defect rates from 0.48% to 0.15%, thus saving approximately 139,638 Thai Baht per month. In addition, production stoppage decision made by workers was used to increase employee involvement in defect detection. Allowing workers to participate in such a decision was an effective way to reduce defect rate and could motivate workers to produce a better quality job. This resulted in arm coil defects reducing from 0.41% to 0.025%, with about 74,562 Thai Baht per month saving. Additionally, an increase in the efficiency of electricity consumption occurred, by increasing the speed of the infrared oven conveyor belt, improving average productivity from 533 pieces/hour to 560 pieces/hour, without adversely affecting product costs and quality, thus producing products of up to the value of 206,242 Thai Baht per month. Furthermore, the new

  5. School Finance and Technology: A Case Study Using Grid and Group Theory to Explore the Connections

    Science.gov (United States)

    Case, Stephoni; Harris, Edward L.

    2014-01-01

    Using grid and group theory (Douglas 1982, 2011), the study described in this article examined the intersections of technology and school finance in four schools located in districts differing in size, wealth, and commitment to technology integration. In grid and group theory, grid refers to the degree to which policies and role prescriptions…

  6. Barriers to Technological Acceptance in a Legal Environment: A Case Study of a Florida Law Firm

    Science.gov (United States)

    Owusu, Theophilus D.

    2010-01-01

    Technology is made available in the law firm to promote time efficient tasks and to provide resources that allows the accurate billing and storing of documents. This study examined the impact of three major technologies that are used by attorneys in a law firm. Quantitative procedures facilitated the identification of barriers to Personal Digital…

  7. Insights into the Intrinsic and Extrinsic Challenges for Implementing Technology Education: Case Studies of Queensland Teachers

    Science.gov (United States)

    Finger, Glenn; Houguet, Belinda

    2009-01-01

    This study, embedded within the "Researching School Change in Technology Education" (RSCTE) project in Queensland, Australia, aimed to gain insights into the intrinsic and extrinsic challenges experienced by teachers during the implementation of technology education within primary school settings. The official publication and launch of…

  8. EDUCATIONAL TECHNOLOGY IN PRACTICE Research and Practical Case Studies from the Field

    Directory of Open Access Journals (Sweden)

    Reviewed by Ozden SAHIN-IZMIRLI

    2010-10-01

    Full Text Available The book starts with an explanation of the reason why the terms found in the book are sometimes used in place of each other. The editors stated that when technological tools are used to establish an effective and productive study process in education, the concept of learning technology is used instead of educational technology. The editors of the book considers the field as complex and vague in terms of the fact that the meanings of the concepts are close to each other in the field of educational technology and that the field provides an opportunity for inter-disciplinary studies. However, according to the editors, this vagueness and complexity shows the superiority of the field. This superiority is explained with the fact that the field of educational technology requires upper-level skills of problem solving and critical thinking and that it presents a multi-dimensional and inter-disciplinary study field. The book was edited by Wanjira Kinuthia and Steward Marshall. Wanjira Kinuthia, an assistant professor at Georgia State University, works in the Department of Middle-Secondary Education and Instructional Technology. Steward Marshall, a professor at the University of the West Indies, is the director of the Distance Education Centre. The book includes five sections and 21 chapters. These sections are “Materials, Methods, and Modalities”, “Technology Implementation and Integration Issues”, “Student Engagement and Learning”, “Building Capacity”, “Using Technology for Performance Improvement and Productivity Enhancement”.

  9. Teaching via Mobile Phone: a Case Study on Malaysian Teachers’ Technology Acceptance and Readiness

    Directory of Open Access Journals (Sweden)

    Issham Ismail

    2013-01-01

    Full Text Available The purpose of this study is to identify the level of technology acceptance among school teachers from the components of awareness and motivation, training and courses, training design, and supports and facilities. This study also aims to investigate whether teachers’ acceptance of technology could influence their readiness for the pedagogical use of mobile phone technology if it is to be implemented in school. A quantitative questionnaire was administered to thirty eight teachers who teach Information and Technology (IT subject from different primary schools in Penang, Malaysia during a program on Teachers’ Development. Data revealed that the level of technology acceptance among respondents in terms of awareness and motivation, training and courses, training design and supports and facilities was generally high. Despite this positive acceptance of technology, teachers’ readiness for the use of mobile phone in teaching and learning was found to be at a considerably low level. However, the study identified a significant correlation between respondents’ awareness and motivation towards technology with their readiness for the pedagogical usage of mobile phone. It was also found that gender is a possible factor influencing the respondents’ readiness. As implication, this paper probes the influence of technology acceptance on teachers’ readiness for the pedagogical usage of mobile phone and the possible implications this influence affords.

  10. Information Technology Framework for Pharmaceutical Supply Chain Demand Management: a Brazilian Case Study

    Directory of Open Access Journals (Sweden)

    Pedro Domingos Antoniolli

    2016-01-01

    Full Text Available The paper aims at proposing an information technology framework for demand management within a dyad on the supply chain pharmaceutical industry. The paper adopts the exploratory study as research method, involving a producer of generic drugs and its main distributor. Data was collected by semi - structured interviews. In pharmaceu tical supply chain, sharing information boosted by information technology translates into greater flexibility and reliability, lower costs, obtained through more reliable forecasting, and lower inventory requirements. There are few initiatives involving In formation Technology (IT applied to demand management in pharmaceutical supply chains available in the literature. It was found that the IT framework proposed in this research is adherent to the demand management of the focused pharmaceutical dyad. Other assumption was that, if partners processes integration exist, better supply chain performance is achieved. It was found that, by means of proposed tools and solutions, such as RFID and involved partners applications integration, this goal could be achieved . Because of the chosen research approach, results may be restricted to these specific dyadic processes. Further application of the proposed IT framework have to be tested. The paper identifies demand management strategic and operational processes that can reach a better performance by using the proposed IT framework. Based on the literature, were identified which IT requirements should be met to demand management processes optimization. Additionally, were applied questionnaires and interviews to the focuse d dyad personnel, to corroborate the data identified in the literature. Answers found in the case study link literature elements with those stated by respondents. Finally, based on this, was conceived an IT framework composed of three elements: 1. One spec ific for infrastructure, to enable data and systems interoperability among SC participants, considering a

  11. Collaborative technologies, higher order thinking and self-sufficient learning: A case study of adult learners

    Directory of Open Access Journals (Sweden)

    Clare S. Johnson

    2017-07-01

    Full Text Available The inclusion of online elements in learning environments is becoming commonplace in Post Compulsory Education. A variety of research into the value of such elements is available, and this study aims to add further evidence by looking specifically at the use of collaborative technologies such as online discussion forums and wikis to encourage higher order thinking and self-sufficient learning. In particular, the research examines existing pedagogical models including Salmon’s five-stage model, along with other relevant literature. A case study of adult learners in community-based learning centres forms the basis of the research, and as a result of the findings, an arrow model is suggested as a framework for online collaboration that emphasises the learner, mentions pre-course preparation and then includes three main phases of activity: post, interact and critique. This builds on Salmon’s five-stage model and has the benefit of being flexible and responsive, as well as allowing for further development beyond the model, particularly in a blended learning environment.

  12. A Case Study of the Application of SAMR and TPACK for Reflection on Technology Integration into Two Social Studies Classrooms

    Science.gov (United States)

    Hilton, Jason Theodore

    2016-01-01

    As emerging technology continues to enter the social studies classroom, teachers need to approach integration of such technology in a systematic manner to ensure that such technology enhances the learning of their students. Currently, scholars of technology integration advocate for the use of one of two different models, either SAMR or TPACK. This…

  13. A case study evaluation of the use of video technology in concrete pavement evaluation.

    Science.gov (United States)

    2000-01-01

    This report presents the results of an evaluation of video technology as a possible solution to the problem of safely collecting objective condition data for prioritizing concrete pavement rehabilitation needs in Virginia. The study involved the eval...

  14. Environmental screening of novel technologies to increase material circularity: A case study on aluminium cans

    DEFF Research Database (Denmark)

    Stotz, Philippe Maurice; Niero, Monia; Bey, Niki

    2017-01-01

    It is undisputed that the recycling of aluminium is desirable as long as the environmental and economic implications of its reintegration do not exceed the burdens of its primary production. The efficiency of any aluminium recycling system can be expressed by the total material losses throughout...... the entire process chain, ideally reaching 0%, thus equivalent to 100% metal recovery. However, in most cases metals are recycled in open/cascade recycling loop where dilution and quality losses occur. Innovations in aluminium beverage can (ABC) design as well as in sorting and recycling technologies have......-related impact categories show the highest susceptibility to increasing recycled content and recycling rate, while the technological novelties show little effect. In terms of abiotic resource depletion the introduction of novel technologies could have the potential to retain quality of the aluminium alloys...

  15. Framework for energy policy and technology assessment in developing countries: a case study of Peru

    Energy Technology Data Exchange (ETDEWEB)

    Mubayi, V.; Palmedo, P.F.; Doernberg, A.B.

    1979-12-01

    The potential of various energy sources and technology options in meeting national economic and social development goals in developing countries is assessed. The resource options that are of interest are the development of indigenous resources. In general, two categories of options can be considered: those which correspond to the accelerated implementation of existing elements of the energy system and those which correspond to the introduction of a new technology, such as solar electricity. The various resource and technology options that must be analyzed with respect to a number of criteria or payoff functions are: total demand and fuel mix; reduction of oil consumption; national social goals; total energy costs; and environmental quality. First, a view is constructed of the energy implications of current national economic development plans. A consistent description of the future energy system of the country, under the assumption of current trends and policies is constructed for certain reference years in the future. The values of the payoff functions selected are then calculated for that reference case. The major resource and technology options are identified and the rates at which they can be implemented are determined. Finally, the impact on the various payoff functions of the implementation of each option is calculated. The basic element of the framework is the Reference Energy System, discussed in Secton 3. The energy policy analysis for Peru is used as a reference case. 11 references, 10 figures, 2 tables.

  16. Measures to restore metallurgical mine wasteland using ecological restoration technologies: A case study at Longnan Rare Earth Mine

    Science.gov (United States)

    Rao, Yunzhang; Gu, Ruizhi; Guo, Ruikai; Zhang, Xueyan

    2017-01-01

    Whereas mining activities produce the raw materials that are crucial to economic growth, such activities leave extensive scarring on the land, contributing to the waste of valuable land resources and upsetting the ecological environment. The aim of this study is therefore to investigate various ecological technologies to restore metallurgical mine wastelands. These technologies include measures such as soil amelioration, vegetation restoration, different vegetation planting patterns, and engineering technologies. The Longnan Rare Earth Mine in the Jiangxi Province of China is used as the case study. The ecological restoration process provides a favourable reference for the restoration of a metallurgical mine wasteland.

  17. Using Information Communication Technologies to Develop Dynamic Curriculum Frameworks for Diverse Cohorts: A Case Study from Event Management

    Science.gov (United States)

    Hadley, Bree Jamila

    2012-01-01

    This article investigates the role of information communication technologies (ICTs) in establishing a well-aligned, authentic learning environment for a diverse cohort of non-cognate and cognate students studying event management in a higher education context. Based on a case study which examined the way ICTs assisted in accommodating diverse…

  18. Methods for studying medical device technology and practitioner cognition : The case of user-interface issues with infusion pumps

    NARCIS (Netherlands)

    Schraagen, J.M.C.; Verhoeven, F.

    2013-01-01

    Purpose : The aims of this study were to investigate how a variety of research methods is commonly employed to study technology and practitioner cognition. User-interface issues with infusion pumps were selected as a case because of its relevance to patient safety. Methods : Starting from a

  19. Casing study

    Energy Technology Data Exchange (ETDEWEB)

    Roche, P.

    2000-12-01

    An unorthodox method of casing drilling used by Tesco Corporation at a gas well in Wyoming to drill deeper using casings as drillpipe is discussed. The process involves either rotating the casing as drill string or using a downhole mud motor to rotate the bit. In this instance, the surface hole and the production hole were casing-drilled to a record 8,312 feet by rotating the casing. The 8 1/2-inch surface hole was drilled with 7-inch casing to 1,200 feet using a Tesco underreamer and a polycrystalline pilot bit; drilling and cementing was completed in 12 1/2 hours. The 6 1/4-inch production hole was drilled with 4 1/2-inch casing and the bottomhole assembly was retrieved after 191 hours rotating. This case was the first in which the entire well was casing-drilled from surface to TD. Penetration rate compared favorably with conventional methods: 12 1/2 hours for casing-drilling to 18.9 hours for conventional drilling, despite the fact that the casing-drilling technology is still in its infancy. It is suggested that casing-drilling has the potential to eliminate the need for the drillpipe entirely. If these expectations were to be realised, casing-drilling could be one of the most radical drilling changes in the history of the oil and gas industry. 1 photo.

  20. Legal Frontiers in the Global Dissemination of Technology and Knowledge: Three Case Studies

    DEFF Research Database (Denmark)

    Tang, Yi Shin

    2008-01-01

    This article explores a few alternatives to the traditional legal and economic theories regarding the problem of global dissemination of knowledge and technology to developing countries. In particular, it examines three cases in which the classical notion of intellectual property rights seems...... to have been exploited in favor of developing countries, both through its conventional application and through more flexible views of such legal institution. The first case deals with the phenomenon of peer production through electronic networks; the second discusses the regulation of trademarks...... in the context of collective rights; and finally, the third case tackles the recent problem of the so-called "abandonwares" and its implications of economic and legal nature....

  1. Factors affecting the educational achievement of mature Māori information technology students: A case study

    Directory of Open Access Journals (Sweden)

    Blain Harre Rakena

    Full Text Available This paper reports on the results of an investigation into the experiences of academically successful adult Māori students undertaking the Bachelor of Information Technology (BIT programme at the Waikato Institute of Technology (Wintec. This research looked at the participants\\' motivation for attending Wintec, the barriers (such as financial, social and family hardships they encountered as they made the transition back to full time study, and their experiences at Wintec. The paper considers the reasons why the participants have achieved well, identifies the support systems they called on, and explores the challenges that they experienced while studying in a tertiary learning environment. Its significance lies in the focus on factors that affect Māori academic success, specifically in information technology, so that teaching approaches and support systems, particularly in the institute of technology and polytechnic (ITP sector, can enhance the success of Māori in the field of IT.

  2. The acceptance of green technology: A case study in Sabah Development Corridor

    Science.gov (United States)

    Jainudin, Noor Azland; Jugah, Ivy; Ali, Awang Nasrizal Awang; Tawie, Rudy

    2017-08-01

    Green technology is the development and application of products, equipment and systems used to conserve the environment which minimizes the negative impact from human activities. The technology can be in the form of green buildings or renewable energy such as hydro, solar and biogas. Development in SDC is still at the early stage, hence there is a prospect to plan for proper green concept implementation. With the increasing number of construction projects particularly in the rapid developing city of Kota Kinabalu, green technology as a whole is becoming more significant as it helps to develop effective solutions to encounter global environmental issues. Although there has been lengthy discussion on the green technology, the visibility of the implementation is still yet to be seen widely in Kota Kinabalu. The implementation of green technology in construction will support dynamic growth of economic development activities, while improving the environment. Hence, it is important to develop a strategic plan to promote the use of green technology while the areas are still developing. The focus of this correlative-based approach study is to investigate the perception and implementation of green technology in Kota Kinabalu from the industrial perspectives.

  3. Explaining experience curves for new energy technologies. A case study of liquefied natural gas

    International Nuclear Information System (INIS)

    Greaker, Mads; Lund Sagen, Eirik

    2008-01-01

    Many new energy technologies seem to experience a fall in unit price as they mature. In this paper we study the unit price of liquefying natural gas in order to make it transportable by ship to gas power installations all over the world. Our point of departure is the experience curve approach, however unlike many other studies of new energy technologies, we also seek to account for autonomous technological change, scale effects and the effects of upstream competition among technology suppliers. To our surprise we find that upstream competition is by far the most important factor contributing to the fall in unit price. With respect to the natural gas business, this may have implications for the future development in prices as the effect of increased upstream competition is temporary and likely to weaken a lot sooner than effects from learning and technological change. Another more general policy implication, is that while promoting new energy technologies, governments must not forget to pay attention to competition policy. (author)

  4. Knowledge Sharing and Dialogue among Information Technology Workers: A Case Study Using a Public Works Department

    Science.gov (United States)

    Harrison, Priscilla

    2013-01-01

    The problem addressed in this study is the willingness or reluctance of information technology (IT) knowledge workers and managers to share knowledge. The purpose of the study was to examine the willingness or unwillingness of technical personnel in IT to share technical knowledge and the issues surrounding their reluctance, if any. The study…

  5. The Employment Effects of High-Technology: A Case Study of Machine Vision. Research Report No. 86-19.

    Science.gov (United States)

    Chen, Kan; Stafford, Frank P.

    A case study of machine vision was conducted to identify and analyze the employment effects of high technology in general. (Machine vision is the automatic acquisition and analysis of an image to obtain desired information for use in controlling an industrial activity, such as the visual sensor system that gives eyes to a robot.) Machine vision as…

  6. Organizational Learning as an Organization Development Intervention in Six High-Technology Firms in Taiwan: An Exploratory Case Study

    Science.gov (United States)

    Lien, Bella Ya-Hui; Hung, Richard Y.; McLean, Gary N.

    2007-01-01

    Organizational learning (OL) is about how individuals collect, absorb, and transform information into organizational memory and knowledge. This case study explored how six high-technology firms in Taiwan chose OL as an organization development intervention strategy. Issues included how best to implement OL; how individuals, teams, and…

  7. One Science Teacher's Professional Development Experience: A Case Study Exploring Changes in Students' Perceptions of Their Fluency with Innovative Technologies

    Science.gov (United States)

    Ebenezer, Jazlin; Columbus, Russell; Kaya, Osman Nafiz; Zhang, Lin; Ebenezer, Devairakkam Luke

    2012-01-01

    The purpose of this case-study is to narrate a secondary science teacher's experience of his professional development (PD) education and training in innovative technologies (IT) in the context of engaging students in environmental research projects. The sources from which the narrative is derived include (1) the science teacher's reflective…

  8. FACTORS INFLUENCING THE SUCCESS OF TECHNOLOGY ADOPTION: A CASE STUDY OF INDONESIAN MANUFACTURING FIRMS

    Directory of Open Access Journals (Sweden)

    Lena Ellitan

    2002-01-01

    Full Text Available To date, the role of technology management as a factor of success in technological innovation has been a subject of significant interest among practitioners and academicians. Despite the plethora of attention given to the numerous issues of management of new technology adoption and implementation, many organizations still fail to manage their technology efficiently, effectively, and strategically. This paper is based on a field investigation via face to face interviews with top management in East Java involving medium and large manufacturing companies from the tobacco, plastic, pulp, furniture, textile, cable and plywood sectors. This research seeks to investigate the extent of technology adoption and its management in medium and large Indonesian manufacturing companies. Further, this study investigates the technology benefits perceived by respondents. The study found that: (1 Indonesian manufacturing companies still lack a strategic perspective when adopting technologies and they are more concerned with short-term issues; (2 they face problems related to people, organizational issues, limited budgets and lack of government support; (3 these problems limit the choice of technologies and together with the national economic situation, reinforces the short-term mindset of top management. In addition, the investigation of critical success factors and inhibitors of technology adoption is necessary for identification of a proper vision and strategic viewpoint of managing new technology. Abstract in Bahasa Indonesia : Sampai sekarang, peranan manajemen teknologi sebagai factor keberhasilan dalam inovasi teknologi menjadi topik yang menarik perhatian para praktisis maupun akademisi. Walaupun masalah-masalah manajemen teknologi dan implementasinya telah banyak diperhatikan, masih ada banyak perusahaan yang belum mampu mengatur teknologi secara efisien, secara efektif atau dengan strategi yang tepat. Makalah ini dibuat berdasarkan survei lapangan yang

  9. Technological Capability Upgrading and Entrepreneurship: Case Study of Selected Indonesian Fish Processing Companies

    Directory of Open Access Journals (Sweden)

    Erman Aminullah

    2016-07-01

    Full Text Available This study analyzes the technological capability upgrading and entrepreneurship in the Indonesian fish processing industry. The analysis viewed from the Sectoral Innovation System (SIS focuses on two aspects: the enabling factors for innovation, and the role of entrepreneur in technological capability upgrading. The study finds that Indonesian fish processing companies: (i are less interactive with local universities or other STI (science, technology and innovation centers, and innovation was mostly done through learning by DUI (doing, using and interacting; (ii are characterized as low-tech industries with a high standard for food safety and product differentiation; (iii apply adaptive innovation, modified from existing technology or knowledge, except for the leading companies who apply innovation for new products in the market; (iv actors, technology, market trends, and networks are the main enabling factors for innovation; and (v the role of entrepreneurs – especially in building entrepreneurial networks – were dominant in the leading companies. The entrepreneurial networks exist and work in global distribution chains that are widely adopted by companies to export their products through buyer–producer relationships. The pathways toward export markets are: global born directly, fastly learned global, and delay learned global companies. These categories have enriched the Mets category (2012. The policy implications of the findings for government should: (i facilitate companies’ interaction with local universities or other STI centers; and (ii encourage domestic companies to improve their competitiveness by shifting to higher added value products through various innovations and trading policy schemes.

  10. Innovation in emerging energy technologies: A case study analysis to inform the path forward for algal biofuels

    International Nuclear Information System (INIS)

    Haase, Rachel; Bielicki, Jeffrey; Kuzma, Jennifer

    2013-01-01

    Algal biofuel is an emerging energy source that has the potential to improve upon the environmental benefits realized by conventional biofuels and contribute to the biofuels mandate set by the Renewable Fuel Standard (RFS). While there has been much research into producing fuel from algae, a commercial-scale facility has not yet been built. We examine two case studies of energy technology innovation in the United States, first generation biodiesel and solar photovoltaics (PV), using the technological innovation system (TIS) framework to provide lessons and inform the path forward for commercializing algal biofuel. We identify five event types that have been the most influential to these innovation processes: changing expectations, technology development, demonstration projects, policy targets, and government subsidies. Some algal biofuel demonstration projects have occurred, but despite falling under the mandates set forth in the RFS (a policy target), algal biofuels do not currently receive production subsidies. The main finding from the case study analysis is that government interventions have significantly influenced the innovation processes of first generation biodiesel and solar PV and will likely be key factors in the commercialization of algal biofuel. - Highlights: • Two energy technology case studies were analyzed with a TIS framework. • Major drivers in the innovation process were identified in each case. • Government interventions were key factors for both. • The one identified key driver algal biofuel is lacking is federal subsidies. • All components of the TIS framework deserve attention in promoting innovation

  11. A case study of data integration for aquatic resources using semantic web technologies

    Science.gov (United States)

    Gordon, Janice M.; Chkhenkeli, Nina; Govoni, David L.; Lightsom, Frances L.; Ostroff, Andrea C.; Schweitzer, Peter N.; Thongsavanh, Phethala; Varanka, Dalia E.; Zednik, Stephan

    2015-01-01

    Use cases, information modeling, and linked data techniques are Semantic Web technologies used to develop a prototype system that integrates scientific observations from four independent USGS and cooperator data systems. The techniques were tested with a use case goal of creating a data set for use in exploring potential relationships among freshwater fish populations and environmental factors. The resulting prototype extracts data from the BioData Retrieval System, the Multistate Aquatic Resource Information System, the National Geochemical Survey, and the National Hydrography Dataset. A prototype user interface allows a scientist to select observations from these data systems and combine them into a single data set in RDF format that includes explicitly defined relationships and data definitions. The project was funded by the USGS Community for Data Integration and undertaken by the Community for Data Integration Semantic Web Working Group in order to demonstrate use of Semantic Web technologies by scientists. This allows scientists to simultaneously explore data that are available in multiple, disparate systems beyond those they traditionally have used.

  12. Designing Robust Process Analytical Technology (PAT) Systems for Crystallization Processes: A Potassium Dichromate Crystallization Case Study

    DEFF Research Database (Denmark)

    Abdul Samad, Noor Asma Fazli Bin; Sin, Gürkan

    2013-01-01

    The objective of this study is to test and validate a Process Analytical Technology (PAT) system design on a potassium dichromate crystallization process in the presence of input uncertainties using uncertainty and sensitivity analysis. To this end a systematic framework for managing uncertaintie...

  13. Tablet Technology in Teacher Preparation: A Case Study--The Nook Initiative

    Science.gov (United States)

    Jordan, Hope; Hunter, Elizabeth; Douglas, Maegan; Wighting, Mervyn

    2015-01-01

    Regent University's Special Education and Reading Specialist Programs introduced the Nook Initiative fall 2013. This paper discusses the implementation, the need for integrated tablet technology in teacher preparation, initial outcomes of the study, and offers suggestions for practice. A second tablet pilot program introducing the iPad mini in the…

  14. Glogsters and Other Motivating Technology: A Multiple Case Study of English Learners

    Science.gov (United States)

    Martinez-Alba, Gilda; Cruzado-Guerrero, Judith; Pitcher, Sharon

    2014-01-01

    The purpose of this study was to investigate how undergraduate Latino English learner (EL) students were motivated to read using technology by their teachers throughout their education. To examine this, they were interviewed, asked to perform a task that involved reading online, required to make a Glogster (an online interactive poster) about…

  15. Examining Current Beliefs, Practices and Barriers about Technology Integration: A Case Study

    Science.gov (United States)

    Hsu, Pi-Sui

    2016-01-01

    The purpose of this mixed-methods study was to examine the current beliefs, practices and barriers concerning technology integration of Kindergarten through Grade Six teachers in the midwestern United States. The three data collection methods were online surveys with 152 teachers as well as interviews and observations with 8 teachers. The findings…

  16. Investigating Parents' Attitudes towards Digital Technology Use in Early Childhood: A Case Study from Croatia

    Science.gov (United States)

    Mikelic Preradovic, Nives; Lešin, Gordana; Šagud, Mirjana

    2016-01-01

    The aim of this study is to investigate perceptions of parents in Croatia towards advantages and disadvantages of computer use in general as well as their children's computer use and to reveal parents' concerns and opinions about digital technology (DT) education in kindergarten. The paper reports on research findings from one of the large public…

  17. Analysis of Use of Virtual Reality Technologies in History Education: A Case Study

    Science.gov (United States)

    Yildirim, Gürkan; Elban, Mehmet; Yildirim, Serkan

    2018-01-01

    Today, many innovations have been experienced in technology. These innovations progressively take their places in education environments. Virtual reality environments are among activity areas that have been frequently discussed and used in education environments in the recent years. In this context, this study aimed to determine general opinions…

  18. Meeting Extension Programming Needs with Technology: A Case Study of Agritourism Webinars

    Science.gov (United States)

    Rich, Samantha Rozier; Komar, Stephen; Schilling, Brian; Tomas, Stacy R.; Carleo, Jenny; Colucci, Susan J.

    2011-01-01

    As clientele needs diversify, Extension educators are examining new technologies, including online tools, to deliver educational programming and resources. Using agritourism as the educational topic, the study reported here sought to evaluate participants' acceptance of online educational programming (webinars) and the effectiveness of the…

  19. Instructional Technologies in the Workforce: Case Studies from the Nuclear Industry.

    Science.gov (United States)

    Widen, William C.; Roth, Gene L.

    1992-01-01

    Describes six types of instructional technology used in the nuclear industry: Study Pacs, computerized test banks, computer-based training, interactive videodisc, artificial intelligence, and full-scope simulation. Each description presents the need, training device, outcomes, and limitations or constraints on use. (SK)

  20. A Case Study in Effectively Bridging the Business Skills Gap for the Information Technology Professional

    Science.gov (United States)

    Gorman, Michael F.

    2011-01-01

    A longitudinal study of information technology (IT) managers at a Fortune 200 company in the Southwest United States was conducted to assess the effectiveness of a training program at bridging the perceived business skills gap for IT employees. A needs assessment was carried out, resulting in a 4-module training program. The program was evaluated…

  1. Information technology companies with focus on sustainable economy: a case study

    Directory of Open Access Journals (Sweden)

    Robson da Silva Teixeira

    2016-01-01

    Full Text Available This article discusses how knowledge is used in sustainable economic development. The survey was drawn from the mapping of four companies that work with information technology, in order to qualitatively analyze the relevance of these enterprises in the economic scenario of the country and how they deal with the "product knowledge." The results showed the investment by all firms studied in the qualification of its workforce and managing the quality of their products and services. Finally, it is concluded that there is much room for information technology grow in Brazil, just invest in innovation.

  2. Using Technologies in Nursing Research Education: A Mixed Methods Case Study.

    Science.gov (United States)

    Luo, Shuhong; Yang, Harrison Hao

    2018-02-28

    To better prepare nurses for the new and expanding roles required in healthcare, faculty are expected to integrate emerging technology into educational processes. Using a mixed methods research design, this study aimed to examine nursing student reactions and learning based on their participation in an online research course through two technology-enhanced assignments: (1) annotation of the structure of a research article and (2) reflection on the content of a research article. Quantitative analysis examined students' questionnaire responses, and qualitative analysis explored students' reflective learning journals and the instructor's notes. These two separate strands of data were then integrated using a joint display. The discussion was guided by two components of the New World Kirkpatrick model, reaction and learning. Our findings suggest that the use of technology in the design of assignments is a way to engage students in learning and can be used to enhance nursing students' research learning online.

  3. Understanding Information Technology Investment Decision-Making in the Context of Hotel Global Distribution Systems: a Multiple-Case Study

    OpenAIRE

    Connolly, Daniel J.

    1999-01-01

    UNDERSTANDING INFORMATION TECHNOLOGY INVESTMENT DECISION-MAKING IN THE CONTEXT OF HOTEL GLOBAL DISTRIBUTION SYSTEMS: A MULTIPLE-CASE STUDY by Daniel J. Connolly Dr. Michael D. Olsen, Chair Department of Hospitality and Tourism Management ABSTRACT This study investigates what three large, multinational hospitality companies do in practice when evaluating and making IT investment decisions. This study was launched in an attempt to 1) learn more about ...

  4. Compressed Air System Renovation Project Improves Production at a Food Processing Facility: Office of Industrial Technologies (OIT) BestPractices Technical Case Study

    International Nuclear Information System (INIS)

    Wogsland, J.

    2001-01-01

    This case study is one in a series on industrial firms who are implementing energy efficient technologies and system improvements into their manufacturing processes. This case study documents the activities, savings, and lessons learned on the food processing facility project

  5. Corporate Energy Conservation Program for Alcoa North American Extrusions: Office of Industrial Technologies (OIT) Aluminum BestPractices Management Case Study

    Energy Technology Data Exchange (ETDEWEB)

    U.S. Department of Energy

    2001-08-06

    This case study is the latest in a series on industrial firms who are implementing energy efficient technologies and system improvements into their manufacturing processes. The case studies document the activities, savings, and lessons learned on these projects.

  6. Corporate Energy Conservation Program for Alcoa North American Extrusions: Office of Industrial Technologies (OIT) Aluminum BestPractices Management Case Study

    International Nuclear Information System (INIS)

    2001-01-01

    This case study is the latest in a series on industrial firms who are implementing energy efficient technologies and system improvements into their manufacturing processes. The case studies document the activities, savings, and lessons learned on these projects

  7. Integrated technology selection for energy conservation and PAHs control in iron and steel industry: Methodology and case study

    International Nuclear Information System (INIS)

    Li, Li; Lu, Yonglong; Shi, Yajuan; Wang, Tieyu; Luo, Wei; Gosens, Jorrit; Chen, Peng; Li, Haiqian

    2013-01-01

    Energy conservation and PAHs (polycyclic aromatic hydrocarbon) control are two challenges for the iron and steel industry, especially where the industry has developed at high speed. How to select appropriate technologies to improve energy efficiency and control pollution from PAHs simultaneously is encountered by both the researchers and the decision makers. This study sets up a framework on technology selection and combination which integrates technology assessment, multiple objective programming and scenario analysis. It can predict proper technology combination for different emission controls, energy conservation targets and desired levels of production. An iron and steel factory in Southwestern China is cited as a case. It is shown that stricter PAHs control will drive the transformation from process control technology to alternative smelting technology. In low PAHs limit, 25% energy reduction is a threshold. Before inclusion of a restraint on energy consumption at 25% reduction, PAHs emission is the key limiting factor for the technology selection; while after inclusion of this restraint, energy consumption becomes the key limiting factor. The desired level of production will also influence the technology selection. This study can help decision makers to select appropriate technologies to meet the PAHs control objectives and energy conservation strategies in energy-intensive industries. - Highlights: ► We predict technical strategy for energy and PAHs reduction in iron and steel mill. ► With low PAHs control objectives, process control technologies are preferable. ► With medium and high PAHs control goals, alternative smelting technology is dominate. ► In low PAHs control objective, 25% energy reduction is a threshold

  8. DEVELOPMENT OF INFORMATION TECHNOLOGY STRATEGIC PLANNING FOR MANUFACTURING INDUSTRY (CASE STUDY: PT MCM

    Directory of Open Access Journals (Sweden)

    Leonardus Hardjo

    2013-10-01

    Full Text Available IT Department in PT MCM has to carry out the duties and functions of developing solution to support the business unit in their operation and gain some benefits which should be obtained by using IT in manufacturing such as increasing efficiency, improving the effectivity in making decision and helping to promote the products. This study aims to design information technology strategic planning in accordance with the strategic plan. The research method is using the IT Strategic Planning framework of Alex Cullen and Marc Cecere. This study uses SWOT and IT Balanced Scorecard to analyze the needs of IT at PT MCM. The results of this study are recommended strategic steps to optimize the implementation of IT in the company to improve the performance from IT division to obtain the benefits by implementing IT in manufacturing and to form IT Blueprint, which is part of the information technology strategic plan in PT MCM.

  9. Knowledge mobilization in the context of health technology assessment: an exploratory case study

    Directory of Open Access Journals (Sweden)

    Fournier Monique F

    2012-04-01

    Full Text Available Abstract Background Finding measures to enhance the dissemination and implementation of their recommendations has become part of most health technology assessment (HTA bodies' preoccupations. The Quebec government HTA organization in Canada observed that some of its projects relied on innovative practices in knowledge production and dissemination. A research was commissioned in order to identify what characterized these practices and to establish whether they could be systematized. Methods An exploratory case study was conducted during summer and fall 2010 in the HTA agency in order to determine what made the specificity of its context, and to conceptualize an approach to knowledge production and dissemination that was adapted to the mandate and nature of this form of HTA organization. Six projects were selected. For each, the HTA report and complementary documents were analyzed, and semi-structured interviews were carried out. A narrative literature review of the most recent literature reviews of the principal knowledge into practice frameworks (2005-2010 and of articles describing such frameworks (2000-2010 was undertaken. Results and discussion Our observations highlighted an inherent difficulty as regards applying the dominant knowledge translation models to HTA and clinical guidance practices. For the latter, the whole process starts with an evaluation question asked in a problematic situation for which an actionable answer is expected. The objective is to produce the evidence necessary to respond to the decision-maker's request. The practices we have analyzed revealed an approach to knowledge production and dissemination, which was multidimensional, organic, multidirectional, dynamic, and dependent on interactions with stakeholders. Thus, HTA could be considered as a knowledge mobilization process per se. Conclusions HTA's purpose is to solve a problem by mobilizing the types of evidence required and the concerned actors, in order to

  10. Influence of different technologies on dynamic pricing in district heating systems: Comparative case studies

    DEFF Research Database (Denmark)

    Dominkovic, Dominik Franjo; Wahlroos, Mikko; Syri, Sanna

    2018-01-01

    District heating markets are often dominated by monopolies in both Denmark and Finland. The same companies, often owned by local municipalities, are usually operating both supplying plants and district heating networks, while the pricing mechanisms are rigid, often agreed upon for one year...... in advance. The mentioned ownership scheme may cause problems, when one tries to gain a third party access in order to deliver excess heat or heat from cheaper heating plants. In this paper, two case studies were carried out to simulate the district heating systems based on dynamic pricing. Case studies were...... carried out for Sønderborg, Denmark and Espoo, Finland. The results showed that dynamic pricing fosters feeding the waste heat into the grid, as dynamic pricing reduced the total primary energy consumption and CO2 emissions in both case studies. In the best scenarios, the weighted average heat price...

  11. Building Competitive Advantage Through Open Innovation : A case study in the financial technology sector

    OpenAIRE

    Jonsson Holm, Erik; Andersson, Felix

    2018-01-01

    The modern financial industry includes fast-changing technology, new regulations, and markets where companies at times find themselves at disadvantage. This study focuses on how organizations can build competitive advantage, particularly by drawing on the open innovation concept. We conceptualize its relationship to competitive advantage as a strategy of using and developing dynamic capabilities in business ecosystems. This view is empirically analysed through qualitative data from four organ...

  12. When a mature technology company pivots: A case study of Logitech

    OpenAIRE

    Anderson Darrell; Daniel Johnson

    2016-01-01

    Life cycle theory has been shown to be an important explanation of the relationship between sales and stock prices. This study explores how the technology company Logitech attempted a transition from a mature life-cycle company in computer peripherals to a growth company in the music, tablet, and gaming industries. We show that stock price correlates with accounting performance differently across the company’s life cycle.

  13. Investigating Parents' Attitudes towards Digital Technology Use in Early Childhood: A Case Study from Croatia

    OpenAIRE

    Nives MIKELIĆ PRERADOVIĆ; Gordana LEŠIN; Mirjana ŠAGUD

    2016-01-01

    The aim of this study is to investigate perceptions of parents in Croatia towards advantages and disadvantages of computer use in general as well as their children's computer use and to reveal parents' concerns and opinions about digital technology (DT) education in kindergarten. The paper reports on research findings from one of the large public kindergartens in the capital city of Croatia. A total of 152 parents of the children aged 3 to 7 enrolled at this early childhood education institut...

  14. Globalisation of birth markets: a case study of assisted reproductive technologies in India.

    Science.gov (United States)

    Sarojini, Nadimpally; Marwah, Vrinda; Shenoi, Anjali

    2011-08-12

    The escalation of Assisted Reproductive Technologies (ARTs) in India into a veritable fertility industry is the result of a multitude of reasons. This paper places the bio-genetic industry within the larger political economy framework of globalisation and privatisation, thus employing a framework that is often omitted from discussions on ARTs, but has direct and significant bearings on the ART industry in India. As markets for human organs, tissues and reproductive body parts experience unprecedented growth, the limits of what can or should be bought and sold continue to be pushed. As such, bodies have emerged as sale-worthy economic capital. Commercial flows of reproductive material create and deploy the division of the body into parts over which ownership is claimed, in the process following 'modern routes of capital' and raising issues of structural inequality.This paper presents a brief picture of India's fertility industry with specific focus on its ground-level operation, nature and growth. It aims to explore the industry dimensions of ARTs, by highlighting the macro picture of health care markets and medical tourism in India, the proliferation of the ART industry, market features such as the social imperative to mother, costs, promotion and marketing, unverified claims, inflated success rates, deals and offers, actors and collaborations in the field, and finally, the absence of standards. This paper presents findings from the research 'Constructing Conceptions: The Mapping of Assisted Reproductive Technologies in India', by Sama, a Delhi-based resource group working on gender, health and rights. This research was conducted from 2008 to 2010 in the three states of Uttar Pradesh, Orissa and Tamil Nadu in India, and is one of the first of its kind, highlighting unethical medical practices and making a case for the regulation of the ART industry. As such, it forms a significant part of Sama's ongoing work on women and technologies, particularly policy

  15. Globalisation of birth markets: a case study of assisted reproductive technologies in India

    Directory of Open Access Journals (Sweden)

    Sarojini Nadimpally

    2011-08-01

    Full Text Available Abstract The escalation of Assisted Reproductive Technologies (ARTs in India into a veritable fertility industry is the result of a multitude of reasons. This paper places the bio-genetic industry within the larger political economy framework of globalisation and privatisation, thus employing a framework that is often omitted from discussions on ARTs, but has direct and significant bearings on the ART industry in India. As markets for human organs, tissues and reproductive body parts experience unprecedented growth, the limits of what can or should be bought and sold continue to be pushed. As such, bodies have emerged as sale-worthy economic capital. Commercial flows of reproductive material create and deploy the division of the body into parts over which ownership is claimed, in the process following 'modern routes of capital' and raising issues of structural inequality. This paper presents a brief picture of India's fertility industry with specific focus on its ground-level operation, nature and growth. It aims to explore the industry dimensions of ARTs, by highlighting the macro picture of health care markets and medical tourism in India, the proliferation of the ART industry, market features such as the social imperative to mother, costs, promotion and marketing, unverified claims, inflated success rates, deals and offers, actors and collaborations in the field, and finally, the absence of standards. This paper presents findings from the research 'Constructing Conceptions: The Mapping of Assisted Reproductive Technologies in India', by Sama, a Delhi-based resource group working on gender, health and rights. This research was conducted from 2008 to 2010 in the three states of Uttar Pradesh, Orissa and Tamil Nadu in India, and is one of the first of its kind, highlighting unethical medical practices and making a case for the regulation of the ART industry. As such, it forms a significant part of Sama's ongoing work on women and technologies

  16. Globalisation of birth markets: a case study of assisted reproductive technologies in India

    Science.gov (United States)

    2011-01-01

    The escalation of Assisted Reproductive Technologies (ARTs) in India into a veritable fertility industry is the result of a multitude of reasons. This paper places the bio-genetic industry within the larger political economy framework of globalisation and privatisation, thus employing a framework that is often omitted from discussions on ARTs, but has direct and significant bearings on the ART industry in India. As markets for human organs, tissues and reproductive body parts experience unprecedented growth, the limits of what can or should be bought and sold continue to be pushed. As such, bodies have emerged as sale-worthy economic capital. Commercial flows of reproductive material create and deploy the division of the body into parts over which ownership is claimed, in the process following 'modern routes of capital' and raising issues of structural inequality. This paper presents a brief picture of India's fertility industry with specific focus on its ground-level operation, nature and growth. It aims to explore the industry dimensions of ARTs, by highlighting the macro picture of health care markets and medical tourism in India, the proliferation of the ART industry, market features such as the social imperative to mother, costs, promotion and marketing, unverified claims, inflated success rates, deals and offers, actors and collaborations in the field, and finally, the absence of standards. This paper presents findings from the research 'Constructing Conceptions: The Mapping of Assisted Reproductive Technologies in India', by Sama, a Delhi-based resource group working on gender, health and rights. This research was conducted from 2008 to 2010 in the three states of Uttar Pradesh, Orissa and Tamil Nadu in India, and is one of the first of its kind, highlighting unethical medical practices and making a case for the regulation of the ART industry. As such, it forms a significant part of Sama's ongoing work on women and technologies, particularly policy

  17. Introducing time delay in the evolution of new technology: the case study of nanotechnology

    Science.gov (United States)

    Georgalis, Evangelos E.; Aifantis, Elias C.

    2013-12-01

    Starting with Feynman's "There's Plenty of Room at the Bottom" prophetic lecture at Caltech in the 1960s, the term "nanotechnology" was first coined in the scientific literature in the 1980s. This was followed by the unprecedented growth in the corresponding scientific field in 2000 due to the financial incentive provided by President Clinton in the US, followed up by similar efforts in Europe, Japan, China and Russia. Today, nanotechnology has become a driving force for economic development, with applications in all fields of engineering, information technology, transport and energy, as well as biology and medicine. Thus, it is important to forecast its future growth and evolution on the basis of two different criteria: (1) the government and private capital invested in related activities, and (2) the number of scientific publications and popular articles dedicated to this field. This article aims to extract forecasts on the evolution of nanotechnology, using the standard logistic equation that result in familiar sigmoid curves, as well as to explore the effect of time delay on its evolution. Time delay is commonly known from previous biological and ecological models, in which time lag is either already known or can be experimentally measured. In contrast, in the case of a new technology, we must first define the method for determining time delay and then interpret its existence and role. Then we describe the implications that time delay may have on the stability of the sigmoidal behavior of nanotechnology evolution and on the related oscillations that may appear.

  18. Commitment to Cybersecurity and Information Technology Governance: A Case Study and Leadership Model

    Science.gov (United States)

    Curtis, Scipiaruth Kendall

    2012-01-01

    The continual emergence of technologies has infiltrated government and industry business infrastructures, requiring reforming organizations and fragile network infrastructures. Emerging technologies necessitates countermeasures, commitment to cybersecurity and information technology governance for organization's survivability and sustainability.…

  19. Internationalization and technological catching up of emerging multinationals : a case study of China's Haier group

    NARCIS (Netherlands)

    Duysters, G.M.; Jacob, J.; Lemmens, C.E.A.V.; Yu, Jintian

    2009-01-01

    A number of firms from China and India have in recent years been demonstrating their ability to face up to the challenges of globalization by internationalizing their operations. In this article we carry out a case study of China's Haier Group followed by a comparison of its growth and

  20. A real-world Case Study in Information Technology for Undergraduate Students

    NARCIS (Netherlands)

    Sikkel, Nicolaas; Spil, Antonius A.M.; van de Weg, R.L.W.

    1999-01-01

    Real-world case studies are important to complement the academic skills and knowledge acquired by computer science students. In this paper we relate our experiences with a course specifically designed to address this issue. The problem to be addressed is the replacement of a Hospital Information

  1. Technology Solutions Case Study: Field Testing an Unvented Roof with Fibrous Insulation and Tiles

    Energy Technology Data Exchange (ETDEWEB)

    None

    2015-11-01

    This case study by the U.S. Department of Energy’s Building America research team Building Science Corporation is a test implementation of an unvented tile roof assembly in a hot-humid climate (Orlando, Florida; zone 2A), insulated with air-permeable insulation (netted and blown fiberglass).

  2. Teaching Information Security with Workflow Technology--A Case Study Approach

    Science.gov (United States)

    He, Wu; Kshirsagar, Ashish; Nwala, Alexander; Li, Yaohang

    2014-01-01

    In recent years, there has been a significant increase in the demand from professionals in different areas for improving the curricula regarding information security. The use of authentic case studies in teaching information security offers the potential to effectively engage students in active learning. In this paper, the authors introduce the…

  3. Internationalization and technological catching up of emerging multinationals: a comparative case study of China's Haier group

    OpenAIRE

    Geert Duysters; Jojo Jacob; Charmianne Lemmens; Yu Jintian

    2009-01-01

    A number of firms from China and India have in recent years been demonstrating their ability to face up to the challenges of globalization by internationalizing their operations. In this article we carry out a case study of China's Haier Group followed by a comparison of its growth and internationalization with those of India's Tata Group. We examine several aspects of their internationalization, such as the mode of internationalization and the choice of overseas destinations. The study furth...

  4. Learning and Leading with Technology: A Case Study of Centennial Campus Magnet Middle School

    Science.gov (United States)

    Morris-Bryant, Edye Darlene

    2012-01-01

    The purpose of this single case study is to describe and document the implementation of a 1:1 laptop program for a middle school with a unique school-university partnership. The goal of this study is two-fold; one being to describe the implementation of a 1:1 laptop program and to document the lessons learned in leading a 1:1 laptop program. This…

  5. Assisting Defense Conversion Technology Transfer Efforts. A Case Study of Ohio’s Miami Valley.

    Science.gov (United States)

    1995-09-01

    Contracting Division, Wright-Patterson AFB OH. Official Letter Correspondence. 24 January 1994. Bryman , Alan. Research Methods and Organization Studies...Washington DC: 22 February 1993. Cooper, Donald R. and C. William Emory. Business Research Methods (Tifth Edition). Chicago: Richard D. Irwin, Inc...data was collected to address the research objective through a case study methodology. First, it describes and justifies the specific method used

  6. The Process of Technology Transfer: A Case Study of the National Aero-Space Plane Program.

    Science.gov (United States)

    1995-09-01

    often characterize qualitative research ( Bryman , 1989:173,178). A final advantage of the case study method is that it is used to develop hypotheses for...November 1992). Bryman , Alan. Research Methods and Organizational Studies. Winchester MA: Unwin Hyman Inc., 1989. Chapman, Richard L. "The Federal...and C. William Emory. Business Research Methods . Chicago: Richard D. Irwin Inc., 1995. Creighton, J.W., J.A. Jolly, and T.A. Buckles. "The Manager’s

  7. Evaluating the Economic Performance of High-Technology Industry and Energy Efficiency: A Case Study of Science Parks in Taiwan

    Directory of Open Access Journals (Sweden)

    Min-Ren Yan

    2013-02-01

    Full Text Available High-technology industries provide opportunities for economic growth, but also raise concerns because of their energy-demanding nature. This paper provides an integrated evaluation of both economic benefits and energy efficiency of high-technology industries based on the real data from one of the globally recognized high-technology industrial clusters, the national science parks in Taiwan. A nation-wide industrial Input-Output Analysis is conducted to demonstrate the positive effects of science parks on national economic developments and industrial upgrades. The concept of energy intensity and an energy-efficient economy index are applied to an integrated assessment of the relationship between economic growth and energy consumption. The proposed case study suggests that economic and energy efficiency objectives can be simultaneously achieved by the development of high-technology industries, while three energy policy implications are considered. First, a nation-wide macro viewpoint is needed and high-technology industries should be considered as parts of the national/regional economies by governmental agencies. Second, a proper industrial clustering mechanism and the shared environmental facilities supported by the government, such as planned land and road usage, electricity and water supply, telecommunications system, sewerage system and wastewater treatments, can improve energy efficiency of high-technology industries. Third, the governmental policies on the taxing and management system in science parks would also direct energy-efficient economy of high-technology industries.

  8. Technology Awareness and Farmers Perception in Adoption of Wheat Production Technologies: Case Study in Njoro and Rongai Divisions

    International Nuclear Information System (INIS)

    Ndiema, A.C.

    2002-01-01

    Wheat is the second most important cereal crop in Kenya but its production has not been able to meet high demand, since production is only fifty percent. The shortfall is supplemented by importation. The purpose of this study was to assess and describe farmers' perception on adoption of wheat production technologies in Njoro and Rongai divisions. One hundred and fifty (150) wheat farmers were randomly selected using stratified proportional random sampling technique. The data was analysed using descriptive and inferential statistics. farmers perception in wheat production is favourable with 80.2% agreeing that it access to credits by farmers. This was only possible to 7.3% of the farmers. above 90% of the farmers in the two divisions exist. Farmers' perception for small-scale 3.25% as higher than 2.75% for large-scale wheat farmers with t-test-2.21 at α=0.05 for pest and disease control.s Education level and farm size significantly affected adoption, while gender and age were not significant

  9. Technology Transfer: A Case Study of Programs and Practices at NASA, DOD, DOC, and Academia

    Science.gov (United States)

    Blood, John R.

    2009-01-01

    Technology transfer is vital to humanity. It spurs innovation, promotes commerce, and provides technology-based goods and services. Technology transfer is also highly complex and interdependent in nature. This interdependence is exemplified principally by the various technology transfer interactions between government, industry, and academia. …

  10. Ethical and deontological aspects of media coverage in technological disasters: case study of the Santiago de Compostela railway accident (2013

    Directory of Open Access Journals (Sweden)

    Alba ALMENARA LORENZO

    2016-12-01

    Full Text Available This study examines the ethical-deontological aspects in media coverage of technological disasters, taking as case subject the most important railway accident in Spain of the last 40 years, which took place on the 24 of July 2013 in Santiago de Compostela. To do so, in first place, it presents a systematic review of Spanish selfregulation of journalistic documents related to the coverage of accidents, disasters, in particular technological disasters. Secondly, an analysis of text and photograph is carried out taking as examples four of the most influential online newspapers amongst the Spanish and Galician public media. The results allow us to confirm that deontological transgressions occurred to some extent in all the digital media studied, both in photographs and text. Lastly, a proposal is included with guidelines for a better coverage of technological disasters, using as a reference the findings of previous analysis.

  11. Innovation technological energetics in rural communities. Case of study community of “Manantiales”, Villa Clara, Cuba

    Directory of Open Access Journals (Sweden)

    Raul Olalde Font

    2016-10-01

    Full Text Available This investigation is framed in the analysis of impacts in the local development starting from the taking of decisions on projects of rural energy in Cuban communities that have as economic main activity the agricultural sector, illustrated the results of a case study where the technological most viable options are selected under the optics of the improvement of indicators of community resources. The methods and used materials are characteristic of a field work with application model are characterized for the taking of decisions in the energy area and their sources SURE, as geographical region the community isolated rural “Manantiales” linked to the agrarian sector in the republic of Cuba and the present period review in the thematic one approached. The main indicators are sketched in each resource of the rural community under the optics of the SURE in their version 3.0, as well the characterization of the prediction of the impacts at each technological option on the resources, is exhibited a mean of impacts and the classification of the technologies according to the level of achievements contribute to the indicators of community resources, obtaining as a result that the hydro energy technology is the most viable option with a value of 100 points in the scale from 0 to 100, followed by the GRID with 91.11 and of the photovoltaic systems based on silicon panels with 90.57, in this case all technologies contribute a significant level of achievements to the local community development.

  12. Technology choice and CDM projects in China: case study of a small steel company in Shandong Province

    International Nuclear Information System (INIS)

    Kaneko, Shinji; Yonamine, Asaka; Jung, Tae Yong

    2006-01-01

    Corporate motives and strategies of both investing and hosting country affect the outcomes of a clean development mechanism (CDM) project-who introduces what technology to whom-and result in large differences in economic viability and the CO 2 emission reductions. This is particularly true for steel industry in which steel making consists of many detailed and complex processes, a given strategy could produce cumulative effects of the individual technologies used, leading to large energy savings overall. The objective of this study is to demonstrate some analytical methods that can be used to quantitatively evaluate the impacts of technology selection on the profit performance of CDM projects. Specifically, in this study we analyze a CDM project to introduce energy saving technology from Japan to a small steel manufacturer in China's Shandong Province, and conduct a simulation of the quantitative relationships between various technology options and profitability. Based on these results, we examine the environmental and economic significance of technology selection for CDM projects. To take this further, we then reconsider the profitability of a project as typical FDI activity (i.e., without the CDM), and by comparing this outcome with the CDM case, we clarify the significance and potential of the CDM

  13. Understanding Technology and People Issues in Hospital Information System (HIS Adoption: Case study of a tertiary hospital in Malaysia

    Directory of Open Access Journals (Sweden)

    Nasriah Zakaria

    2016-11-01

    Full Text Available Summary: Background: Hospital Information Systems (HIS can improve healthcare outcome quality, increase efficiency, and reduce errors. The government of Malaysia implemented HIS across the country to maximize the use of technology to improve healthcare delivery, however, little is known about the benefits and challenges of HIS adoption in each institution. This paper looks at the technology and people issues in adopting such systems. Methods: The study used a case study approach, using an in-depth interview with multidisciplinary medical team members who were using the system on a daily basis. A thematic analysis using Atlas.ti was employed to understand the complex relations among themes and sub-themes to discover the patterns in the data. . Results: Users found the new system increased the efficiency of workflows and saved time. They reported less redundancy of work and improved communication among medical team members. Data retrieval and storage were also mentioned as positive results of the new HIS system. Healthcare workers showed positive attitudes during training and throughout the learning process. Conclusions: From a technological perspective, it was found that medical workers using HIS has better access and data management compared to the previously used manual system. The human issues analysis reveals positive attitudes toward using HIS among the users especially from the physicians’ side. Keywords: HIS adoption, Technology and people issues, Case study

  14. Wastewater collection and treatment technologies for semi-urban areas of India: a case study.

    Science.gov (United States)

    Sundaravadivel, M; Vigneswaran, S

    2001-01-01

    Sanitation and wastewater management problems in small and medium towns in India (referred to as "semi-urban areas"--SUAs) are distinctly different from those of large cities or rural villages. There is an apparent lack of choices of appropriate sanitation options for these semi-urban areas, leading them to adopt on-site sanitation technologies. A field study of four such small towns in India was conducted to evaluate the suitability of available low-cost wastewater collection and treatment technologies, in light of their current practice. Based on the field study, this paper suggests a system comprising "combined surface sewers" and "reed-bed channel" for collection and treatment of wastewater for semi-urban areas, that can utilize all the existing infrastructure to effect better sanitation at lower costs. The suggested system involves converting the existing open wastewater collection drains on the road sides, as "decentralized" networks of covered drains with simple structural modifications to collect both wastewater and stormwater; and, converting the large open drains on the outskirts of SUAs that carry wastewater to agricultural fields, as gravel media filled beds planted with local reeds. Cost estimates for the towns studied indicate this system to be over 70% cheaper compared to conventional collection and treatment systems.

  15. How to assess the availability of resources for new technologies? Case study: lithium a strategic metal for emerging technologies

    International Nuclear Information System (INIS)

    Weil, M.; Ziemann, S.; Schebek, L.

    2009-01-01

    The development of new technologies is often connected with the use of non-renewable resources. In recent years a qualitative shift in the demand of bulk metals (e.g. Fe, Al, Cu) to more scarce metals (e.g. Te, Ga, Re) is recognizable. Novel technologies and products rely more and more on very specific metals which are indispensable for their function. Although such metals are generally used in low concentrations in products, the demand has raised significantly due to mass production. Some of them are of high importance due to their strategic relevance to emerging innovative technologies. Lithium so far has gained relatively little attention, although it fulfills the main criteria of a strategically relevant metal. In recent years, however, recognition of lithium increased as a result of the growing market for lithium-based chargeable batteries in mobile information/communication consumer products and in electric vehicles. Both areas of demand led to a skyrocketed use of lithium in recent years. Other technologies in the future like fusion power generation will raise lithium consumption at an accelerated rate. It is therefore necessary to determine the availability of lithium in the medium and long term in order to prevent technology failures and to ensure a more sustainable development. The authors will provide a well founded knowledge base, outline the availability of worldwide reserves and resources, and describe the structure of present and future demands for lithium. (authors)

  16. Climate friendly technology transfer in the energy sector: A case study of Iran

    International Nuclear Information System (INIS)

    Talaei, Alireza; Ahadi, Mohammad Sadegh; Maghsoudy, Soroush

    2014-01-01

    The energy sector is the biggest contributor of anthropogenic emissions of greenhouse gases into the atmosphere in Iran. However, abundant potential for implementing low-carbon technologies offers considerable emissions mitigation potential in this sector, and technology transfer is expected to play an important role in the widespread roll-out of these technologies. In the current work, globally existing low-carbon energy technologies that are compatible with the energy sector of Iran are identified and then prioritised against different criteria (i.e. Multi Criteria Decision Analysis). Results of technology prioritisation and a comprehensive literature review were then applied to conduct a SWOT analysis and develop a policy package aiming at facilitating the transfer of low carbon technologies to the country. Results of technology prioritisation suggest that the transport, oil and gas and electricity sectors are the highest priority sectors from technological needs perspective. In the policy package, while fuel price reform and environmental regulations are categorised as high priority policies, information campaigns and development of human resources are considered to have moderate effects on the process of technology transfer. - Highlights: • We examined the process of technology transfer in the energy sector of Iran. • Multi Criteria Decision Analysis techniques are used to prioritise the technological needs of the country. • Transportation, electricity and oil and gas sectors are found as recipients of new technologies. • A policy package was designed for facilitating technology transfer in the energy sector

  17. Coconut processing technologies for rural transformation – Case study on coconut water vinegar

    OpenAIRE

    6. Seeja Thomachan, Deepu Mathew and Habeeburrahman P. V.

    2010-01-01

    The role of coconut based technologies in social development of rural India is described based on the influence of coconut vinegar technology in the rural women of Malappuram district, Kerala state, India

  18. Barriers to investments in energy saving technologies. Case study for the industry

    NARCIS (Netherlands)

    Masselink, Dirk Jan

    2007-01-01

    To realise future energy saving targets, the government needs to increase energy reduction rates. One option to increase energy savings is found in removing barriers to investments in cost-effective energy saving technologies. Many technologies save energ

  19. [The implementation of innovative medical technologies: biological pharmaceuticals for the treatment of psoriasis--a case study].

    Science.gov (United States)

    Tal, Orna; Lomnicky, Yosef

    2012-06-01

    Advanced health systems worldwide strive to adopt new technologies that will ensure improved health and better clinical outcomes. The implementation of new medical technologies is affected by medical factors as well as economic and social forces, influencing both the individual and the health care providers. Chronic disease management is a major challenge to governments, as a result of the cumulative effects of chronic morbidity, life expectancy, quality of life and the national burden of disease due to accelerating medical expenditure. Psoriasis, a common chronic disease, for which advanced technologies were recently implemented, was chosen as a case study. The distribution of utility of various technologies for the treatment of psoriasis over the past nine years was analyzed to categorize "patterns of behavior" in accordance with the lifecycle of medical technology described in the Literature. It is expected that these changing trends will produce overall economic consequences, on direct expenditure combined with a reduction in some health services. Analyzing these clinical and economic trends, may add important considerations for the adoption of emerging medical technologies, presenting an important tool for policymakers at at all levels.

  20. Comparative study of linkage between environmental policy instruments and technological innovation: Case study on end-of-life vehicles technologies in Japan and EU.

    Science.gov (United States)

    Singh, Rajeev Kumar; Yabar, Helmut; Nozaki, Noriko; Niraula, Baburam; Mizunoya, Takeshi

    2017-08-01

    A growing population and urbanization is a challenge for finite natural resources. Without strict regulation to recycle, recover and reuse resources, waste is discarded with no value. Every year throughout the world, more than twenty-five million vehicles turn into end-of-life vehicles (ELV) and most of their valuable resources end up in landfill sites. This research analyses the effect of regulation on ELV innovation for additional recovery of resources in Japan and EU nations using patent data as a proxy. The analysis determines the statistical difference in patent activity before and after regulations were enacted in the case studies. The relevant data on ELV technologies was gathered for the period 1985-2013. The study suggests that in general environmental regulation in Japan drove innovation and reveals that environmental policy in Japan was more effective in enabling innovation compared to EU nations. Specifically, the results from these developed countries can be used by the rapidly growing developing countries in automobile manufacturing like China for amendment of their ELV regulation accordingly. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Decision to adopt medical technology: case study of breast cancer radiotherapy techniques.

    Science.gov (United States)

    Gold, Heather Taffet; Pitrelli, Kimberly; Hayes, Mary Katherine; Murphy, Madhuvanti Mahadeo

    2014-11-01

    To understand decision making concerning adoption and nonadoption of accelerated partial breast radiotherapy (RT) prior to long-term randomized trial evidence. A total of 36 radiation oncologists and surgeons were recruited through purposive and snowball sampling strategies from September 2010 through January 2013. Semistructured phone interviews were conducted and audio-recorded and lasted 20-45 minutes. Qualitative analysis was conducted using a framework approach, iteratively exploring key concepts and emerging issues raised by subjects. Interviews were transcribed and imported into Atlas.ti v6. Transcripts were independently coded by 3 researchers shortly after each interview, followed by consensus development on each coded transcript. Barriers and facilitators of adoption, practice patterns, and informational/educational sources concerning accelerated partial breast RT were all assessed to determine major themes. Nearly half of physicians were surgeons (47%), and half were radiation oncologists (53%), with 61% overall in urban settings. Twenty-nine of the 36 physicians interviewed used brachytherapy-based partial breast RT. Five major factors were involved in physicians' decisions to adopt accelerated partial breast RT: facilitators encouraging adoption (e.g., enthusiastic colleagues and patient convenience), financial and prestige incentives, pressures to adopt (e.g., potential declines in referrals), judgment concerning acceptable level of scientific evidence, and barriers (e.g., not having appropriate machinery or referral mechanism in place). If technology was adopted, clinical guideline adherence varied. Technology adoption is based on financial and social pressures, along with often-limited scientific evidence and what seems "best" for patients. For technology adoption and diffusion to be rational and evidence-based, we must encourage appropriate financial payment models to curb use outside of research studies and promote development of additional

  2. Wind energy technology development and diffusion: a case study of Inner Mongolia, China

    International Nuclear Information System (INIS)

    Xiliang Zhang; Shuhua Gu; Wenqiang Liu; Lin Gan

    2001-01-01

    This article reviews the spread of small household wind generators and the development of wind farms in Inner Mongolia, China with emphasis on policy and institutional perspectives. It analyses the patterns of wind technology dissemination within social, economic, and environmental contexts. It also discusses international investment and technology transfer relating to wind energy technology. The economics of windfarm development are examined and the role of alternative policy instruments analysed. Major constraints to wind technology development are identified and relevant policy recommendations suggested. (Author)

  3. Design A Situated Learning Environment Using Mixed Reality Technology - A Case Study

    OpenAIRE

    Rasimah Che Mohd Yusoff; Halimah Badioze Zaman; Azlina Ahmad

    2010-01-01

    Mixed Reality (MR) is one of the newest technologies explored in education. It promises the potential to promote teaching and learning and making learners- experience more "engaging". However, there still lack of research on designing a virtual learning environment using MR technology. In this paper, we describe the Mixed Reality technology, the characteristics of situated learning as instructional design for virtual environment using mixed reality technology. We also exp...

  4. Wind energy technology development and diffusion: a case study of Inner Mongolia, China

    International Nuclear Information System (INIS)

    Zhang Xiliang; Liu Wenqiang; Gu Shuhua; Gan Lin

    2001-01-01

    This article reviews the spread of small household wind generators and the development of wind farms in Inner Mongolia, China with emphasis on policy and institutional perspectives. It analyzes the patterns of wind technology dissemination within social, economic, and environmental contexts. It also discusses international investment and technology transfer relating to wind energy technology. The economics of windfarm development are examined and the role of alternative policy instruments analyzed. Major constraints to wind technology development are identified and relevant policy recommendations suggested. (author)

  5. The Effects of Technology Entrepreneurship on Customers and Society: A Case Study of a Spanish Pharmaceutical Distribution Company

    Science.gov (United States)

    Muñoz, Rosa M.; Sánchez de Pablo, Jesús D.; Peña, Isidro; Salinero, Yolanda

    2016-01-01

    The main purpose of this paper is to provide an understanding, within the field of corporate entrepreneurship, of the various factors that enable technology entrepreneurship in established firms and its principal effects on customers and society. The paper reports on a case study regarding technology entrepreneurship in a Spanish company whose activity is pharmaceutical distribution. This company has been able to overcome the consequences of the worldwide crisis and start an innovative process which includes the installation of new information technology (IT) and an investment of 6 million Euros. It is, in this respect, a model to imitate and the objective of this paper is therefore to discover the managers’ entrepreneurial orientation (EO) characteristics which have made this possible, along with the organizational and social effects resulting from the process. We verify that EO is present in this company and that the development of new IT has important effects on customers and the population. PMID:27445938

  6. The Effects of Technology Entrepreneurship on Customers and Society: A Case Study of a Spanish Pharmaceutical Distribution Company.

    Science.gov (United States)

    Muñoz, Rosa M; Sánchez de Pablo, Jesús D; Peña, Isidro; Salinero, Yolanda

    2016-01-01

    The main purpose of this paper is to provide an understanding, within the field of corporate entrepreneurship, of the various factors that enable technology entrepreneurship in established firms and its principal effects on customers and society. The paper reports on a case study regarding technology entrepreneurship in a Spanish company whose activity is pharmaceutical distribution. This company has been able to overcome the consequences of the worldwide crisis and start an innovative process which includes the installation of new information technology (IT) and an investment of 6 million Euros. It is, in this respect, a model to imitate and the objective of this paper is therefore to discover the managers' entrepreneurial orientation (EO) characteristics which have made this possible, along with the organizational and social effects resulting from the process. We verify that EO is present in this company and that the development of new IT has important effects on customers and the population.

  7. Designing Program Roadmaps to Catalyze Community Formation: A Case Study of the Long-Term Stewardship Science and Technology Roadmapword

    International Nuclear Information System (INIS)

    Dixon, Brent; Hanson, Duane; Matthern, Gretchen

    2003-01-01

    A number of broad perspective technology roadmaps have been developed in the last few years as tools for coordinating nation-wide research in targeted areas. These roadmaps share a common characteristic of coalescing the associated stakeholder groups into a special-interest community that is willing to work cooperatively in achieving the roadmap goals. These communities are key to roadmap implementation as they provide the collaborative energy necessary to obtain the political support and funding required for identified science and technology development efforts. This paper discusses the relationship between roadmaps and special-interest communities, using the recently drafted Department of Energy's Long-Term Stewardship Science and Technology Roadmap as a case study. Specific aspects this roadmap's design facilitated the development of a long-term stewardship community while specific realities during roadmap development impacted the realization of the design

  8. How Children Think and Feel about Design and Technology: Two Case Studies.

    Science.gov (United States)

    Foster, Patrick N.; Wright, Michael D.

    2001-01-01

    Observations of and interviews with 28 second- and fourth-grade students and 2 teachers revealed that elementary technology education activities increased technological capability and knowledge, improved attitudes toward technology, and provided practice in perceptual and psychomotor skills. (Contains 32 references.) (SK)

  9. Impact of Collaborative Work on Technology Acceptance: A Case Study from Virtual Computing

    Science.gov (United States)

    Konak, Abdullah; Kulturel-Konak, Sadan; Nasereddin, Mahdi; Bartolacci, Michael R.

    2017-01-01

    Aim/Purpose: This paper utilizes the Technology Acceptance Model (TAM) to examine the extent to which acceptance of Remote Virtual Computer Laboratories (RVCLs) is affected by students' technological backgrounds and the role of collaborative work. Background: RVCLs are widely used in information technology and cyber security education to provide…

  10. Systematic mapping study of information communication technology research for agriculture (in case of developing Countries)

    DEFF Research Database (Denmark)

    Zewge, Amanuel; Dittrich, Yvonne

    2015-01-01

    Context: A rural community in a developing country is a socially complex and infrastructural weak environment that demands clear understanding of the social, economical, cultural, and political precondition before implementing information commutation technology (ICT) innovations. Objective: This ...... for an ongoing discourse to fill identified gaps from software engineering, computer science or information system research perspective. Keywords: design method, information system, development, agriculture.......: This work aims to conduct a Systematic Mapping Study (SMS) to get an in-depth understanding about ICT based researches for agriculture in developing countries. Method: A systematic mapping study was carried out to investigate and distill the state-of-the-art from ranked journals and conference publications....... In doing so, data extraction task was carried out using fifteen variables. Eg. What kinds of research challenges and contributions were reported to design ICTs based solutions? Which disciplines (knowledge areas) were most explored? Result: ICT in agriculture has gained attention over the past few years...

  11. Assessment of new instrumentation and control technologies. Remote multiplexing. A case study

    International Nuclear Information System (INIS)

    Long, A.B.

    1978-01-01

    New instrumentation and control technologies must be justified for application in power plants on the basis of improved plant performance and reduced investment costs. This justification requires that capability differences among systems be identified and that implementation schemes be selected which permit meaningful comparisons. A simple evaluation of initial investment costs is frequently inadequate because it does not account for operational expenses or resulting changes in plant performance. As an example of a more comprehensive evaluation methodology, this paper reviews the procedures and results from a recently completed study of remote multiplexing funded by the Electric Power Research Institute (EPRI). In this study it was found that plant-wide multiplexing of non-safety instrumentation and control signals is technically feasible, can be designed to satisfy availability requirements, may save millions of dollars as a hardwire replacer, and can provide other significant intangible benefits. (author)

  12. Applying artificial intelligence technology to support decision-making in nursing: A case study in Taiwan.

    Science.gov (United States)

    Liao, Pei-Hung; Hsu, Pei-Ti; Chu, William; Chu, Woei-Chyn

    2015-06-01

    This study applied artificial intelligence to help nurses address problems and receive instructions through information technology. Nurses make diagnoses according to professional knowledge, clinical experience, and even instinct. Without comprehensive knowledge and thinking, diagnostic accuracy can be compromised and decisions may be delayed. We used a back-propagation neural network and other tools for data mining and statistical analysis. We further compared the prediction accuracy of the previous methods with an adaptive-network-based fuzzy inference system and the back-propagation neural network, identifying differences in the questions and in nurse satisfaction levels before and after using the nursing information system. This study investigated the use of artificial intelligence to generate nursing diagnoses. The percentage of agreement between diagnoses suggested by the information system and those made by nurses was as much as 87 percent. When patients are hospitalized, we can calculate the probability of various nursing diagnoses based on certain characteristics. © The Author(s) 2013.

  13. Methods for studying medical device technology and practitioner cognition: the case of user-interface issues with infusion pumps.

    Science.gov (United States)

    Schraagen, Jan Maarten; Verhoeven, Fenne

    2013-02-01

    The aims of this study were to investigate how a variety of research methods is commonly employed to study technology and practitioner cognition. User-interface issues with infusion pumps were selected as a case because of its relevance to patient safety. Starting from a Cognitive Systems Engineering perspective, we developed an Impact Flow Diagram showing the relationship of computer technology, cognition, practitioner behavior, and system failure in the area of medical infusion devices. We subsequently conducted a systematic literature review on user-interface issues with infusion pumps, categorized the studies in terms of methods employed, and noted the usability problems found with particular methods. Next, we assigned usability problems and related methods to the levels in the Impact Flow Diagram. Most study methods used to find user interface issues with infusion pumps focused on observable behavior rather than on how artifacts shape cognition and collaboration. A concerted and theory-driven application of these methods when testing infusion pumps is lacking in the literature. Detailed analysis of one case study provided an illustration of how to apply the Impact Flow Diagram, as well as how the scope of analysis may be broadened to include organizational and regulatory factors. Research methods to uncover use problems with technology may be used in many ways, with many different foci. We advocate the adoption of an Impact Flow Diagram perspective rather than merely focusing on usability issues in isolation. Truly advancing patient safety requires the systematic adoption of a systems perspective viewing people and technology as an ensemble, also in the design of medical device technology. Copyright © 2012 Elsevier Inc. All rights reserved.

  14. Social perceptions about a technological innovation for fuelwood cooking: Case study in rural Mexico

    International Nuclear Information System (INIS)

    Troncoso, Karin; Castillo, Alicia; Masera, Omar; Merino, Leticia

    2007-01-01

    The widespread use of traditional biomass fuels in open fires in developing countries brings about serious health effects, besides high fuelwood consumption. A technological innovation-i.e., improved cookstoves-reduce fuel consumption and address the health effects of indoor air pollution. Implementation projects have been conducted worldwide, but have frequently faced very low success rates. Different demographic and socio-economic factors have been analysed to explain low rates but there are almost no studies that try to understand, from the users' perspective, the factors involved when choosing among different cooking technologies. Through a qualitative methodological approach we documented the adoption of improved cookstoves through the implementation programme of a Mexican NGO. Results showed that although the programme raised public awareness, the improved cookstoves did not reach the poorest sector. The socioeconomic level was found positively correlated with the adoption of the improved cookstoves, but neither the age nor the educational levels were. Payment of the stove did not seem to be an adoption factor. Differences among individual users were more significant than differences between communities. Finally as men are the principal fuelwood harvesters, they should be considered as an important group in diffusion programs

  15. Disseminating energy-efficient technologies: a case study of compact fluorescent lamps (CFLs) in India

    International Nuclear Information System (INIS)

    Kumar, Arun; Jain, Sudhir K.; Bansal, N.K.

    2003-01-01

    Disseminating energy-efficient technologies, even when they may appear to be technically perfect, is always a tough task, more so in economies with low purchasing power and educational levels. The compact fluorescent lamp (CFL) is one such well-known product that consumes only 20% electricity for the same light output as given out by the ubiquitous incandescent lamp and which, if adopted in a big way, has the potential of reducing peak electric power loads very significantly. However, in India, the CFL sales are still not growing in the expected manner. The current study was accordingly undertaken to investigate the underlying reasons and to determine the most effective ways in which an efficient technology like this could be popularized. The task involved the designing and administering of questionnaires to some 900 respondents from 100 locations representing various socio-economic, educational and professional backgrounds in and around Delhi, and analysing the results in terms of an importance index. Based on this feedback, the authors recommend an aggressive implementation of the formula standing for EDucation, POlicy support, STAandards, Demonstrations and INdustry involvement (EDPOSTADIN) at least for popularizing CFLs

  16. Discourse over a contested technology on Twitter: A case study of hydraulic fracturing.

    Science.gov (United States)

    Hopke, Jill E; Simis, Molly

    2015-10-04

    High-volume hydraulic fracturing, a drilling simulation technique commonly referred to as "fracking," is a contested technology. In this article, we explore discourse over hydraulic fracturing and the shale industry on the social media platform Twitter during a period of heightened public contention regarding the application of the technology. We study the relative prominence of negative messaging about shale development in relation to pro-shale messaging on Twitter across five hashtags (#fracking, #globalfrackdown, #natgas, #shale, and #shalegas). We analyze the top actors tweeting using the #fracking hashtag and receiving @mentions with the hashtag. Results show statistically significant differences in the sentiment about hydraulic fracturing and shale development across the five hashtags. In addition, results show that the discourse on the main contested hashtag #fracking is dominated by activists, both individual activists and organizations. The highest proportion of tweeters, those posting messages using the hashtag #fracking, were individual activists, while the highest proportion of @mention references went to activist organizations. © The Author(s) 2015.

  17. Informing international UNFCCC technology mechanisms from the ground up: Using biogas technology in South Africa as a case study to evaluate the usefulness of potential elements of an international technology agreement in the UNFCCC negotiations process

    International Nuclear Information System (INIS)

    Boyd, Anya

    2012-01-01

    Transfer of low carbon technologies to developing countries is 1 approach for tackling rising global emissions. An international technology transfer mechanism has been proposed under the UNFCCC; however, it remains unclear how this international mechanism would translate into local level technology implementation. This study uses biogas technology in South Africa to obtain empirical data inductively related to technology transfer. Observations and activities specific to the biogas sector in South Africa are put forward based on site visits and stakeholder discussions in South Africa, the UK, Germany and Sweden. This paper presents empirical findings on technology transfer in the biogas sector in South Africa and analyses the role of an international technology mechanism in supporting the uptake of biogas. Many of the barriers to biogas technology in South Africa are national level constraints such as lack of supportive policy environment, financial incentives and information sharing. This case study supports the argument that it will be unrealistic for international technology mechanisms to capture the necessary specificities of individual technologies at a country level. Therefore, as demonstrated through the example of biogas technology in South Africa, there is a need for both effective national and international engagement to support technology implementation. - Highlights: ► The UNFCCC technology mechanism aims to increase low carbon technology deployment. ► The interface of global technology frameworks and national implementation is unclear. ► Biogas is a widely used technology yet its uptake in South Africa (SA) is minimal. ► Empirical data is gathered from biogas sites in SA, UK, Germany and Sweden. ► Findings show biogas uptake in SA requires national and international support

  18. Technological innovation and convergent journalism. Case study on the transformation process of Bavaria’s public broadcasting service

    Directory of Open Access Journals (Sweden)

    Klaus MEIER

    2017-01-01

    Full Text Available As a consequence of technological innovations and their social utilisation, media organisations and newsrooms are undergoing a fundamental transformation process. This article analyses the interrelations between technological innovations and the challenges of convergent journalism. Studies conducted on newsroom convergence to date set out from one-sided influences: They investigated the extent to which technical innovations determine the newsrooms, or whether journalistic structures and long-range trends are so strong as to largely obstruct the adoption of new technologies in journalism. Therefore technology — especially in studies carried out on newsroom convergence — is considered as an influencing factor on somehow resisting or non-resisting newsrooms. We broaden the scope of this investigation by considering that any such influence might not come exclusively from technology, but that impulses can come also from innovative newsrooms: technological gaps, wishes and obstacles are identified from the journalist's viewpoint and brought to the attention of the developers of newsroom technologies — on the basis of empirical research findings from a case study of Bavaria’s public broadcasting service, Bayerischer Rundfunk (BR. With its 5.000 employees, BR is one of Germany's largest media organisations. It is undergoing a fundamental and long-term convergence process. A variety of gaps, problems and wishes came to light from 25 in-depth interviews with journalists working on innovative projects. For example, criticism is expressed of complicated, partly unknown or non-existent networking of cross-media production systems. There is a desire for the increased use of consumer devices like smartphones in professional news production. There exists a creative potential for innovative solutions, but these are not comprehensively evaluated. To date, there has been no systematic implementation of the findings of innovative media projects in everyday

  19. Using interactive graphical and technological strategies for EFL reading comprehension: A case study involving engineering students

    Directory of Open Access Journals (Sweden)

    Julia Valeska Barraza

    2014-09-01

    Full Text Available This qualitative study engaged a group of engineering students in the use of interactive graphical and technological strategies called IGOs (interactive, graphic organisers software in order to improve their level of EFL reading comprehension. The learners were asked to use three different types of IGOs, causes and effects, a sequence of events and pros and cons. Data was gathered through an opinion’s survey with the intention of collecting and evaluating the students’ perceptions on the use of the IGOs software. Findings revealed that most of the learners answered positively. Students also expressed they wanted more opportunities to use this software; because they not only could improve their scores but also, they enjoyed the experience they had using the new strategies software.

  20. Organizational effects of information and communication technology (ICT) in elderly homecare: a case study.

    Science.gov (United States)

    Vimarlund, Vivian; Olve, Nils-Göran; Scandurra, Isabella; Koch, Sabine

    2008-09-01

    The use of information and communication technology (ICT) to support integrated healthcare services in elderly homecare is becoming more established. In particular, ICT can enable information exchange, knowledge sharing and documentation at the point-of-care (POC). The aim of this study was to explore these effects using the Old@Home prototype. Old@Home was perceived to contribute in developing horizontal links for communication between individuals who work together, independent of geographical distance or organizational affiliation, and to contribute to increased work efficiency. The prototype was further seen to reduce professional isolation by providing a holistic overview of the care process. User centred design and implementation of Old@Home was considered key to facilitating acceptance of organizational changes. Participation of care professionals not only led to a better understanding of the needs of involved organizations, but also increased end-users' involvement and commitment, stimulating them to test and improve the prototype until the final version.

  1. An overview of application of bayesian classifier approach in radioactive tracer technology.case study

    International Nuclear Information System (INIS)

    El-Aseer, A.; Dawood, E.; Ben Ayad, S.; Alwerfalli, M.

    2015-01-01

    The usefulness of implementing a radioactive tracer techniques subjected to varied risk factors. Thus, the setup procedure for the application experimental techniques of radioactive tracer must be evaluated prior the decision action steps. One way of doing this, is to use Bay's theorem techniques. As there is a possibility of classifying the implemented parameters into certain catogries depending on their certainty to effect radioactive tracer technology. In this paper, the radioactive tracer experimental parameters classified accoring to Bayesian theory. Using this theory, one can study the proposed technical systems to determine the probabilities of the effectiveness of any selected parameter among the others. The classification of the applied experimental parameters into suitable or unsuitable in proposed theoretically. Ten parameters used in this experimental data were classified accordingly. The posterior is calculate from the prior and the likelihood previously determined by bayes rule.(author)

  2. A dual use case study of space technologies for terrestrial medical applications (Conference Presentation)

    Science.gov (United States)

    Cozmuta, Ioana

    2017-05-01

    Many challenges exist in understanding the human body as a whole, its adaptability, its resilience, its immunological response, its healing and regeneration power. New knowledge is usually obtained by exploring unique conditions and environments and space is one such variable. Primarily, these attributes have been studied in space for the purpose of understanding the effect of the space environment on long duration space travel. However a myriad of lessons learned have emerged that are important for terrestrial medicine problems such as cardiovascular changes, intracranial pressure changes, vision changes, reduced immunity, etc. For medical study purposes, the changes induced by the space environment on the human body are in general fast and predictable; they persist while in the space environment but also revert to the initial pre-flight healthy state upon return to Earth. This provides a unique cycle to study wellness and disease prediction as well as to develop more effective countermeasures for the benefit of people on earth. At a scientific level, the environment of space can be used to develop new lines of investigations and new knowledge to push the terrestrial state of the art (i.e. study of phase diagrams, identification of new system's states, etc). Moreover, the specialized requirements for space medicine have driven advances in terrestrial medical technologies in areas such as monitoring, diagnostic, prevention and treatment. This talk will provide an overview of compelling examples in key areas of interest for terrestrial medical applications.

  3. Mining the human phenome using semantic web technologies: a case study for Type 2 Diabetes.

    Science.gov (United States)

    Pathak, Jyotishman; Kiefer, Richard C; Bielinski, Suzette J; Chute, Christopher G

    2012-01-01

    The ability to conduct genome-wide association studies (GWAS) has enabled new exploration of how genetic variations contribute to health and disease etiology. However, historically GWAS have been limited by inadequate sample size due to associated costs for genotyping and phenotyping of study subjects. This has prompted several academic medical centers to form "biobanks" where biospecimens linked to personal health information, typically in electronic health records (EHRs), are collected and stored on large number of subjects. This provides tremendous opportunities to discover novel genotype-phenotype associations and foster hypothesis generation. In this work, we study how emerging Semantic Web technologies can be applied in conjunction with clinical and genotype data stored at the Mayo Clinic Biobank to mine the phenotype data for genetic associations. In particular, we demonstrate the role of using Resource Description Framework (RDF) for representing EHR diagnoses and procedure data, and enable federated querying via standardized Web protocols to identify subjects genotyped with Type 2 Diabetes for discovering gene-disease associations. Our study highlights the potential of Web-scale data federation techniques to execute complex queries.

  4. Cost of organic waste technologies: A case study for New Jersey

    Directory of Open Access Journals (Sweden)

    Gal Hochman

    2015-09-01

    Full Text Available This paper evaluates the benefits of converting food waste and manure to biogas and/or fertilizer, while focusing on four available waste treatment technologies: direct combustion, landfilling, composting, and anaerobic digestion. These four alternative technologies were simulated using municipal-level data on food waste and manure in New Jersey. The criteria used to assess the four technologies include technological productivity, economic benefits, and impact on land scarcity. Anaerobic digestion with gas collection has the highest technological productivity; using anaerobic digesters would supply electricity to nearly ten thousand families in New Jersey. In terms of economic benefits, the landfill to gas method is the least costly method of treating waste. In comparison, direct combustion is by far the most costly method of all four waste-to-energy technologies.

  5. Wind energy technology development and diffusion. A case study of Inner Mongolia, China

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Xiliang; Gu Shuhua; Liu Wenqiang; Lin Gan

    1999-09-01

    This report provides an overview of the diffusion of small household wind generators and development of wind farms in Inner Mongolia, China, with the emphasis on policy and institutional perspectives. It analyses the patterns of wind technology diffusion within social, economic, and environmental contexts and relates the diffusion of wind technology to institutional framework building and international investment and technology transfer. By examining the economics of windfarm development and analysing the role of alternative policy instruments, the major constraints of wind technology development are analysed and relevant policy recommendations are given. 12 refs., 3 figs., 9 tabs.

  6. Technology Transfer Challenges: A Case Study of User-Centered Design in NASA's Systems Engineering Culture

    Science.gov (United States)

    Quick, Jason

    2009-01-01

    The Upper Stage (US) section of the National Aeronautics and Space Administration's (NASA) Ares I rocket will require internal access platforms for maintenance tasks performed by humans inside the vehicle. Tasks will occur during expensive critical path operations at Kennedy Space Center (KSC) including vehicle stacking and launch preparation activities. Platforms must be translated through a small human access hatch, installed in an enclosed worksite environment, support the weight of ground operators and be removed before flight - and their design must minimize additional vehicle mass at attachment points. This paper describes the application of a user-centered conceptual design process and the unique challenges encountered within NASA's systems engineering culture focused on requirements and "heritage hardware". The NASA design team at Marshall Space Flight Center (MSFC) initiated the user-centered design process by studying heritage internal access kits and proposing new design concepts during brainstorming sessions. Simultaneously, they partnered with the Technology Transfer/Innovative Partnerships Program to research inflatable structures and dynamic scaffolding solutions that could enable ground operator access. While this creative, technology-oriented exploration was encouraged by upper management, some design stakeholders consistently opposed ideas utilizing novel, untested equipment. Subsequent collaboration with an engineering consulting firm improved the technical credibility of several options, however, there was continued resistance from team members focused on meeting system requirements with pre-certified hardware. After a six-month idea-generating phase, an intensive six-week effort produced viable design concepts that justified additional vehicle mass while optimizing the human factors of platform installation and use. Although these selected final concepts closely resemble heritage internal access platforms, challenges from the application of the

  7. Technological transitions as evolutionary configuration processes: A multi-level perspective and a case-study

    NARCIS (Netherlands)

    Geels, F.W.

    2002-01-01

    This paper addresses the question of how technological transitions (TT) come about? Are there particular patterns and mechanisms in transition processes? TT are defined as major, long-term technological changes in the way societal functions are fulfilled. TT do not only involve changes in

  8. Technological transitions as evolutionary reconfiguration processes: a multi-level perspective and a case study

    NARCIS (Netherlands)

    Geels, F.W.

    2002-01-01

    This paper addresses the question of how technological transitions (TT) come about? Are there particular patterns and mechanisms in transition processes? TT are defined as major, long-term technological changes in the way societal functions are fulfilled. TT do not only involve changes in

  9. Understanding the End User Perspective: A Multiple-Case Study of Successful Health Information Technology Implementation

    Science.gov (United States)

    Behravesh, Bardia

    2010-01-01

    The United States continues to lag behind other countries in its adoption of health information technology. A failure to increase adoption will jeopardize the nation's ability to reduce medical errors, address the rapid growth of healthcare costs, and enact effective healthcare reform. Health information technology (HIT) implementation success…

  10. Applications and Case Studies of the Next-Generation Sequencing Technologies in Food, Nutrition and Agriculture.

    Science.gov (United States)

    Next-generation sequencing technologies are able to produce high-throughput short sequence reads in a cost-effective fashion. The emergence of these technologies has not only facilitated genome sequencing but also changed the landscape of life sciences. Here I survey their major applications ranging...

  11. Barriers to Successful Implementation of Technology Integration in Educational Settings: A Case Study

    Science.gov (United States)

    Laferrière, T.; Hamel, C.; Searson, M.

    2013-01-01

    Representing issues discussed at the EduSummIT 2011 relative to essential conditions and barriers to successful technology integration, this article presents a systemic analysis of barriers that needed to be overcome for an information technology initiative (Remote Networked School project) to be successfully implemented. The analysis was…

  12. Technology transfer of nuclear power development in developing countries: Case study of China

    International Nuclear Information System (INIS)

    He Jiachen; Shen Wenquan; Zhang Luqing

    2000-01-01

    This paper describes the specific experiences in the technology transfer of nuclear power in China, a country that both imported and developed indigenous nuclear technology. Based on this experience some recommendations are presented that should be considered particularly by the developing countries. (author)

  13. Visualization technology in neuropsychological research: A case study on corporal imaginary

    Directory of Open Access Journals (Sweden)

    Heidi Figueroa Sarriera

    2013-11-01

    Full Text Available Psychology, as a discipline, adopts a dualistic imaginary of the body: as a porous yet closed boundary. Therefore, accessing the "truth" of the subject requires all sorts of techniques and tools. The psychological discourse often considers these devices in exteriority of the subject. As a counterpoint, I propose that the artifacts are a constituent part of the corporal imaginary. The argument compares the Skinner Air Crib and Gesell’s Laboratory, two inventions of the mid-twentieth century, and a XXI century neuropsychological research about the location of the self. In the first two cases, the body is constructed as a porous barrier that participates within hygienic parameters, both operating and optimizing individual performance and military metaphors that has shaped social policy practices. The discussion of the neuropsychological research, as a case study, does not intend to question the results of the research from the neuropsychological field. It points towards those understandings and assumptions that reveal the connection of the neuropsychological discourse with its cultural context. Special attention is paid to gender construction, ways of mediating scientific knowledge, the hybridity between the neuropsychological reductionism of the scientific framing and the entertainment industry; as well as to the new forms of identity formation and the complementarity of the visuals and performance in the contemporary scene. 

  14. Enhancement of Cognitive Processing by Multiple Sclerosis Patients Using Liquid Cooling Technology: A Case Study

    Science.gov (United States)

    Montgomery, Leslie D.; Montgomery, Richard W.; Ku, Yu-Tsuan; Luna, Bernadette (Technical Monitor)

    1997-01-01

    Cognitive dysfunction is a common symptom in patients with multiple sclerosis (MS). This can have a significant impact on the quality of life of both the patient and of their primary care giver. This case study explores the possibility that liquid cooling therapy may be used to enhance the cognitive processing of MS patients in the same way that it provides temporary relief of some physical impairment. Two MS patients were presented a series of pattern discrimination tasks before and after being cooled with a liquid cooling garment for a one hour period. The subject whose ear temperature was reduced during cooling showed greater electroencephalographic (EEG) activity and scored much better on the task after cooling. The patient whose ear temperature was unaffected by cooling showed less EEG activity and degraded performance after the one hour cooling period.

  15. The Application Study in Solar Energy Technology for Highway Service Area: A Case Study of West Lushan Highway Low-Carbon Service Area in China

    OpenAIRE

    Qin, Xiaochun; Shen, Yi; Shao, Shegang

    2015-01-01

    A lot of research works have been made concerning highway service area or solar technology and acquired great achievements. However, unfortunately, few works have been made combining the two topics together of highway service areas and solar energy saving to make a systemic research on solar technology application for highway service area. In this paper, taking West Lushan highway low-carbon service area in Jiangxi Province of China as the case study, the advantages, technical principles, and...

  16. Identifying the key processes for technology transfer through spin-offs in academic institutions : a case study in Flanders and The Netherlands

    OpenAIRE

    Meysman, Jasmine; Cleyn, De, Sven H.; Braet, Johan

    2017-01-01

    Abstract: The position and role of technology transfer offices within universities and academic institutions have changed under influence of todays society, with diminishing government subsidies and technology transfer related policies having their impact on the technology transfer processes. In order to find out what the effect of this impact is, we performed a multiple-case study on six technology transfer offices in Flanders and The Netherlands. As a result of the study, we identified two ...

  17. BIM integration in education: A case study of the construction technology project Bolt Tower Dolni Vitkovice

    Science.gov (United States)

    Venkrbec, Vaclav; Bittnerova, Lucie

    2017-12-01

    Building information modeling (BIM) can support effectiveness during many activities in the AEC industry. even when processing a construction-technological project. This paper presents an approach how to use building information model in higher education, especially during the work on diploma thesis and it supervision. Diploma thesis is project based work, which aims to compile a construction-technological project for a selected construction. The paper describes the use of input data, working with them and compares this process with standard input data such as printed design documentation. The effectiveness of using the building information model as a input data for construction-technological project is described in the conclusion.

  18. Using technology to enhance the quality of home health care: three case studies of health information technology initiatives at the visiting nurse service of New York.

    Science.gov (United States)

    Russell, David; Rosenfeld, Peri; Ames, Sylvia; Rosati, Robert J

    2010-01-01

    There is a growing recognition among health services researchers and policy makers that Health Information Technology (HIT) has the potential to address challenging issues that face patients and providers of healthcare. The Visiting Nurse Service of New York (VNSNY), a large not-for-profit home healthcare agency, has integrated technology applications into the service delivery model of several programs. Case studies, including the development and implementation, of three informatics initiatives at VNSNY are presented on: (1) Quality Scorecards that utilize process, outcomes, cost, and satisfaction measures to assess performance among clinical staff and programs; (2) a tool to identify patients at risk of being hospitalized, and (3) a predictive model that identifies patients who are eligible for physical rehabilitation services. Following a description of these initiatives, we discuss their impact on quality and process indicators, as well as the opportunities and challenges to implementation. © 2010 National Association for Healthcare Quality.

  19. Deriving Requirements for Pervasive Well-Being Technology From Work Stress and Intervention Theory: Framework and Case Study.

    Science.gov (United States)

    Koldijk, Saskia; Kraaij, Wessel; Neerincx, Mark A

    2016-07-05

    Stress in office environments is a big concern, often leading to burn-out. New technologies are emerging, such as easily available sensors, contextual reasoning, and electronic coaching (e-coaching) apps. In the Smart Reasoning for Well-being at Home and at Work (SWELL) project, we explore the potential of using such new pervasive technologies to provide support for the self-management of well-being, with a focus on individuals' stress-coping. Ideally, these new pervasive systems should be grounded in existing work stress and intervention theory. However, there is a large diversity of theories and they hardly provide explicit directions for technology design. The aim of this paper is to present a comprehensive and concise framework that can be used to design pervasive technologies that support knowledge workers to decrease stress. Based on a literature study we identify concepts relevant to well-being at work and select different work stress models to find causes of work stress that can be addressed. From a technical perspective, we then describe how sensors can be used to infer stress and the context in which it appears, and use intervention theory to further specify interventions that can be provided by means of pervasive technology. The resulting general framework relates several relevant theories: we relate "engagement and burn-out" to "stress", and describe how relevant aspects can be quantified by means of sensors. We also outline underlying causes of work stress and how these can be addressed with interventions, in particular utilizing new technologies integrating behavioral change theory. Based upon this framework we were able to derive requirements for our case study, the pervasive SWELL system, and we implemented two prototypes. Small-scale user studies proved the value of the derived technology-supported interventions. The presented framework can be used to systematically develop theory-based technology-supported interventions to address work stress. In

  20. CASE STUDY

    African Journals Online (AJOL)

    2011-06-02

    Jun 2, 2011 ... immunosuppression associated with HIV/AIDS puts them at a higher risk of developing oesophageal cancer. 47. CASE STUDY. A 49-year-old man was diagnosed as HIV infected, with a CD4 count of 60 cells/µl. He was started on an antiretroviral treatment regimen comprising zidovudine, lamivudine and ...

  1. Using Mobile Technology to Enhance Undergraduate Student Digital Information Literacy Skills: A Canadian Case Study

    Directory of Open Access Journals (Sweden)

    Alice Schmidt Hanbidge

    2015-08-01

    Full Text Available Learning essential information literacy skills through the use of mobile phones is an innovative mlearning pilot project that was collaboratively undertaken in a Canadian university college over the course of two academic terms by faculty and the library staff. The research pilot project involved ninety one undergraduate students in five different classes majoring in psychology, social work, education or social development studies in an attempt to determine the effectiveness of using mobile technology to enhance students’ information literacy skills and learning experiences. Pre and post-test measures, and survey questionnaires generated quantitative and qualitative data that was analyzed to determine the degree of changes in frequency of mobile device information literacy access and fluency in digital literacy skills. The article highlights the Mobile Information Literacy innovation and includes the development and design of the mobile lessons, interactive exercises, and its applications. The study’s main results and conclusions are also discussed. Additionally, the successes and challenges of the pilot to support anytime, anywhere student mobile information literacy eLearning training that engages mobile learners and enhances their learning experience are identified and critically reflected upon to improve the innovation for stage two of the project.

  2. Health Information Technology Systems profoundly impact users: a case study in a dental school.

    Science.gov (United States)

    Hill, Heather K; Stewart, Denice C L; Ash, Joan S

    2010-04-01

    The purpose of this study was to increase our understanding of the impact of Health Information Technology Systems (HITS) on dental school users when the systems are integrated into chair-side patient care. We used qualitative research methods, including interviews, focus groups, and observations, to capture the experiences of HITS users at a single institution. Users included administrators, clinical faculty members, predoctoral students, support staff, and residents. The data were analyzed using a grounded theory approach, and nine themes emerged: 1) HITS benefits were disproportionate among users; 2) communicating about the HITS was challenging; 3) users experienced a range of strong emotions; 4) the instructor persona diminished; 5) there were shifts in the school's power structure; 6) allocation of end-users' time shifted; 7) the training and support needs of end-users were significant; 8) perceived lack of HITS usability made documentation cumbersome for clinicians; and 9) clinicians' workflow was disrupted. HITS integration into patient care impacts the work of all system users, especially end-users. The themes highlight areas of potential concern for implementers and users in integrating a HITS into patient care.

  3. Alternative energy technologies as a cultural endeavor. A case study of hydrogen and fuel cell development in Germany

    Energy Technology Data Exchange (ETDEWEB)

    Galich, Ante [Luxembourg Univ., Walferdange (Luxembourg). Faculty of Language and Literature, Humanities, Arts and Education; Wissenschaftszentrum Berlin fuer Sozialforschung gGmbH, Berlin (Germany). Abt. ' ' Kulturelle Quellen von Neuheit' ' ; Marz, Lutz [Wissenschaftszentrum Berlin fuer Sozialforschung gGmbH, Berlin (Germany). Abt. ' ' Kulturelle Quellen von Neuheit' '

    2012-12-15

    The wider background to this article is the shift in the energy paradigm from fossil energy sources to renewable sources which should occur in the twenty-first century. This transformation requires the development of alternative energy technologies that enable the deployment of renewable energy sources in transportation, heating, and electricity. Among others, hydrogen and fuel cell technologies have the potential to fulfill this requirement and to contribute to a sustainable and emission-free transport and energy system. However, whether they will ever reach broad societal acceptance will not only depend on technical issues alone. The aim of our study is to reveal the importance of nontechnical issues. Therefore, the article at hand presents a case study of hydrogen and fuel cells in Germany and aims at highlighting the cultural context that affects their development. Our results were obtained from a rich pool of data generated in various research projects through more than 30 in-depth interviews, direct observations, and document analyses. We found that individual and collective actors developed five specific supportive practices which they deploy in five diverse arenas of meaning in order to attach certain values to hydrogen and fuel cell technologies. Based on the results, we drew more general conclusions and deducted an overall model for the analysis of culture in technological innovations that is outlined at the end of the article. It constitutes our contribution to the interdisciplinary collaboration required for tackling the shift in this energy paradigm.

  4. Systematic Mapping Study of Information Technology for Development in Agriculture (The Case of Developing Countries)

    DEFF Research Database (Denmark)

    Zewge, Amanuel; Dittrich, Yvonne

    2017-01-01

    With its rapid proliferation in the developing world, information and communication technology (ICT) has been accepted as an opportunity to assist disadvantaged people. Many projects have piloted ICT supporting rural communities in developing countries. Such rural communities are socially complex...

  5. Case studies of the use of biometrics technologies to reduce fraud in governmental and industrial environments

    Science.gov (United States)

    Bordes, Roy N.

    1998-12-01

    The purpose of this presentation is to enlighten the reader on the advancements that have been made in the field of biometrics technology as it relates to government and industrial-type applications. The term 'biometrics' is defined as, 'Any technology that uses electronically scanned graphical information for identification purposes.' Biometric technology was for a long time in the experimental stages, with many BETA test projects that were really not applicable to industrial markets. During the course of this presentation, we will show that biometrics applications do work, can develop positive returns on investment, but from a security standpoint have some major application problems that still need to be overcome. We will also address which biometric technologies have a better future in the security world than others.

  6. New technology adoption for Russian energy generation: What does it cost? A case study for Moscow

    International Nuclear Information System (INIS)

    Bratanova, Alexandra; Robinson, Jacqueline; Wagner, Liam

    2016-01-01

    Highlights: • Power generation cost is modelled for a Russian region under two gas price scenarios. • Conventional, new and renewable technologies are compared based on levelised cost. • Regional energy system is shown to be crucially dependent on natural gas prices. • We conclude that new gas-fired technology adoption is feasible and cost-competitive. • Biomass demonstrates cost competitiveness, whereas solar appears infeasible. - Abstract: Russia is frequently referred to as a country with substantial energy efficiency and renewable energy potential. In 2000–2008 energy-gross domestic product (GDP) ratios were improved by 35%, however, the contribution of technological progress accounts for only 1% of the energy-GDP ratio reduction. At the same time, although new policy mechanisms to stimulate renewable energy development have been recently introduced, renewable technology deployment has not yet taken off. Economic theory suggests that there is no better incentive for industry development than cost signals. This paper adapts the levelised cost of energy methodology to examine the cost structures associated with electricity generation by conventional and new technology types for a Russian region (Moscow). The model, run for two fuel price scenarios, allowed us to conclude that the regional energy supply system is heavily dependent on the natural gas price and that the diversification provided by technology development will be beneficial for the energy security of the region. We conclude that new and renewable technologies become cost-effective for electricity generation as domestic natural gas prices reach parity with export prices. However, strong political and financial support is needed to boost technological development and renewables application in Russia.

  7. The teacher acting as mediator in new technologies use: a case study in physics teaching

    OpenAIRE

    Almeida Valiati, Eliane Regina de; Heineck, Renato

    2005-01-01

    Nowadays, the new technologies challenge the educational practices. When teachers face this new teaching and learning pattern they need to adopt a different attitude: of a mediator, in which one its main role is to experience and mediate processes of learning construction proportioned and encouraged by the increasing inclusion of New Communication and Information Technologies (NCTIs) at schools. This paper presents the results obtained in a research which objective was to evaluate the use of ...

  8. Stroke patients' utilisation of extrinsic feedback from computer-based technology in the home: a multiple case study realistic evaluation.

    Science.gov (United States)

    Parker, Jack; Mawson, Susan; Mountain, Gail; Nasr, Nasrin; Zheng, Huiru

    2014-06-05

    Evidence indicates that post-stroke rehabilitation improves function, independence and quality of life. A key aspect of rehabilitation is the provision of appropriate information and feedback to the learner.Advances in information and communications technology (ICT) have allowed for the development of various systems to complement stroke rehabilitation that could be used in the home setting. These systems may increase the provision of rehabilitation a stroke survivor receives and carries out, as well as providing a learning platform that facilitates long-term self-managed rehabilitation and behaviour change. This paper describes the application of an innovative evaluative methodology to explore the utilisation of feedback for post-stroke upper-limb rehabilitation in the home. Using the principles of realistic evaluation, this study aimed to test and refine intervention theories by exploring the complex interactions of contexts, mechanisms and outcomes that arise from technology deployment in the home. Methods included focus groups followed by multi-method case studies (n = 5) before, during and after the use of computer-based equipment. Data were analysed in relation to the context-mechanism-outcome hypotheses case by case. This was followed by a synthesis of the findings to answer the question, 'what works for whom and in what circumstances and respects?' Data analysis reveals that to achieve desired outcomes through the use of ICT, key elements of computer feedback, such as accuracy, measurability, rewarding feedback, adaptability, and knowledge of results feedback, are required to trigger the theory-driven mechanisms underpinning the intervention. In addition, the pre-existing context and the personal and environmental contexts, such as previous experience of service delivery, personal goals, trust in the technology, and social circumstances may also enable or constrain the underpinning theory-driven mechanisms. Findings suggest that the theory-driven mechanisms

  9. A Comparative Assessment of Wind Turbine Innovation and Diffusion Policies. Historical Case Studies of Energy Technology Innovation

    DEFF Research Database (Denmark)

    Neij, Lena; Andersen, Per Dannemand

    2012-01-01

    Wind turbines have become a mainstream technology, a first choice for many when investing in new electricity generation facilities. This comparative case study addresses how governmental policy has been formulated to support the wind turbine innovation and diffusion process. Three innovation stages...... and corresponding innovation strategies are identified. The first stage is the early movers of the 1970s and early 1980s, including pioneer countries such as Denmark, the United States, Germany, and the Netherlands. The second stage is the booming markets of the 1990s, guided by the successful Danish innovation...

  10. A Case Study of the Link between Artificial Intelligence and Knowledge Creation in Emerging Technology in China

    DEFF Research Database (Denmark)

    Søberg, Peder Veng

    2017-01-01

    in much knowledge creation research, the empirical insights come from a case study in a Chinese startup SME (small and medium-sized enterprise) within the emerging industry of visual intelligence/surveillance systems. The findings, extracted from semi-structured interviews as well as observations, suggest...... of consent requirements when collecting information and a willing population makes China an ideal test bed for visual intelligence technologies. The chapter exposes the shortcomings of the existing knowledge creation theory and bridges these with insights on how to overcome them in different contexts...

  11. Technology mix alternatives with high shares of wind power and photovoltaics—case study for Spain

    International Nuclear Information System (INIS)

    Zubi, Ghassan

    2011-01-01

    The shift to a low carbon society is an issue of highest priority in the EU. For electricity generation, such a target counts with three main alternatives: renewable energies, nuclear power and carbon capture and storage. This paper focuses on the renewables’ alternative. Due to resource availability, a technology mix with a high share of PV and wind power is gaining increasing interest as a major solution for several EU member states and in part for the EU collectively to achieve decarbonization and energy security with acceptable costs. Due to their intermittency, the integration of high shares of PV and wind power in the electricity supply is challenging. This paper presents a techno-economic assessment of technology mix alternatives with a high share of PV and wind power in Spain, as an example. Thereby, the focus is on the option of increasing wind curtailment versus substituting rigid baseload generation in favor of the more flexible gas turbines and combined cycle gas turbines. - Highlights: ► The potential of power generation from renewable energy resources in the EU is illustrated. ► The LEC of the different technologies considered is calculated for today and future scenarios. ► An excel-based model for the technology mix assessment is applied using Spanish data. ► Technology mix alternatives with a high share of PV and wind power are assessed. ► The focus is on increasing wind curtailment vs. relying on more flexible power generation units.

  12. CONTRIBUTION OF STAKEHOLDER ENGAGEMENT TO THE IMPACT OF A HEALTH TECHNOLOGY ASSESSMENT: AN IRISH CASE STUDY.

    Science.gov (United States)

    Ryan, Máirín; Moran, Patrick S; Harrington, Patricia; Murphy, Linda; O'Neill, Michelle; Whelan, Marty; Teljeur, Conor

    2017-01-01

    The aim of this study was to illustrate the contribution of stakeholder engagement to the impact of health technology assessment (HTA) using an Irish HTA of a national public access defibrillation (PAD) program. In response to draft legislation that proposed a PAD program, the Minister for Health requested that Health Information and Quality Authority undertake an HTA to inform the design and implementation of a national PAD program and the necessary underpinning legislation. The draft legislation outlined a program requiring widespread installation and maintenance of automatic external defibrillators in specified premises. Stakeholder engagement to optimize the impact of the HTA included one-to-one interviews with politicians, engagement with an Expert Advisory Group, public and targeted consultation, and positive media management. The HTA quantified the clinical benefits of the proposed PAD program as modest, identified that substantial costs would fall on small/medium businesses at a time of economic recession, and that none of the programs modeled were cost-effective. The Senator who proposed the Bill actively publicized the HTA process and its findings and encouraged participation in the public consultation. Participation of key stakeholders was important for the quality and acceptability of the HTA findings and advice. Media management promoted public engagement and understanding. The Bill did not progress. The HTA informed the decision not to progress with legislation for a national PAD program. Engagement was tailored to ensure that key stakeholders including politicians and the public were informed of the HTA process, the findings, and the advice, thereby maximizing acceptance. Appropriate stakeholder engagement optimizes the impact of HTA.

  13. Contesting Technologies in the Networked Society: A Case Study of Hydraulic Fracturing and Shale Development

    Science.gov (United States)

    Hopke, Jill E.

    In this dissertation, I study the network structure and content of a transnational movement against hydraulic fracturing and shale development, Global Frackdown. I apply a relational perspective to the study of role of digital technologies in transnational political organizing. I examine the structure of the social movement through analysis of hyperlinking patterns and qualitative analysis of the content of the ties in one strand of the movement. I explicate three actor types: coordinator, broker, and hyper-local. This research intervenes in the paradigm that considers international actors as the key nodes to understanding transnational advocacy networks. I argue this focus on the international scale obscures the role of globally minded local groups in mediating global issues back to the hyper-local scale. While international NGOs play a coordinating role, local groups with a global worldview can connect transnational movements to the hyper-local scale by networking with groups that are too small to appear in a transnational network. I also examine the movement's messaging on the social media platform Twitter. Findings show that Global Frackdown tweeters engage in framing practices of: movement convergence and solidarity, declarative and targeted engagement, prefabricated messaging, and multilingual tweeting. The episodic, loosely-coordinated and often personalized, transnational framing practices of Global Frackdown tweeters support core organizers' goal of promoting the globalness of activism to ban fracking. Global Frackdown activists use Twitter as a tool to advance the movement and to bolster its moral authority, as well as to forge linkages between localized groups on a transnational scale. Lastly, I study the relative prominence of negative messaging about shale development in relation to pro-shale messaging on Twitter across five hashtags (#fracking, #globalfrackdown, #natgas, #shale, and #shalegas). I analyze the top actors tweeting using the #fracking

  14. Exploring educational partnerships: a case study of client provider technology education partnerships in New Zealand primary schools

    Science.gov (United States)

    Weal, Brenda; Coll, Richard

    2007-04-01

    This paper explores the notion of educational partnerships and reports on research on client provider partnerships between full primary schools and external technology education providers for Year 7 and 8 New Zealand students (age range approx. 12 to 13 years). Educational reforms in New Zealand and the introduction of a more holistic technology education curriculum in 1995 changed the nature of the relationship between the technology education partners. The research sought to identify, from the perspective of the primary schools (clients), factors that contribute to successful partnerships between them and their technology education provider. A mixed methods approach consisting of a survey of client schools, in-depth interviews and a series of four in-depth case studies (drawing on issues derived from the survey) was employed. Issues relating to teacher subculture, leadership roles and inflexibility of official processes all surfaced. The research points to an absence of commitment, shared understanding, shared power, leadership, communication and accountability in many educational partnerships that were the focus of this work.

  15. BIM integration in education: A case study of the construction technology project Bolt Tower Dolni Vitkovice

    Directory of Open Access Journals (Sweden)

    Venkrbec Vaclav

    2017-12-01

    Full Text Available Building information modeling (BIM can support effectiveness during many activities in the AEC industry. even when processing a construction-technological project. This paper presents an approach how to use building information model in higher education, especially during the work on diploma thesis and it supervision. Diploma thesis is project based work, which aims to compile a construction-technological project for a selected construction. The paper describes the use of input data, working with them and compares this process with standard input data such as printed design documentation. The effectiveness of using the building information model as a input data for construction-technological project is described in the conclusion.

  16. Using Technology in Social Work Practice: The mDad (Mobile Device Assisted Dad Case Study

    Directory of Open Access Journals (Sweden)

    Shawna J. Lee

    2015-07-01

    Full Text Available Mobile technology presents an exciting opportunity for social workers to reach populations that are typically underserved by interventions and services. We present one application of technology that is particularly relevant to social work practice. The mDad (Mobile Device Assisted Dad app was developed to augment existing social work practices by providing a father-friendly tool to help new fathers learn about and engage with their infants and toddlers. We discuss the process of developing the app content and conducting usability testing of the mDad app. We conclude with a discussion of the lessons learned from the mDad project, and the challenges of implementation and dissemination of technology-based interventions in community contexts.

  17. Increasing the Capacity of Existing Bridges by Using Unbonded Prestressing Technology: A Case Study

    Directory of Open Access Journals (Sweden)

    Antonino Recupero

    2014-01-01

    Full Text Available External posttensioning or unbonded prestressing was found to be a powerful tool for retrofitting and for increasing the life extension of existing structures. Since the 1950s, this technique of reinforcement was applied with success to bridge structures in many countries, and was found to provide an efficient and economic solution for a wide range of bridge types and conditions. Unbonded prestressing is defined as a system in which the post-tensioning tendons or bars are located outside the concrete cross-section and the prestressing forces are transmitted to the girder through the end anchorages, deviators, or saddles. In response to the demand for a faster and more efficient transportation system, there was a steady increase in the weight and volume of traffic throughout the world. Besides increases in legal vehicle loads, the overloading of vehicles is a common problem and it must also be considered when designing or assessing bridges. As a result, many bridges are now required to carry loads significantly greater than their original design loads; and their deck results still deteriorated by cracking of concrete, corrosion of rebars, snapping of tendons, and so forth. In the following, a case study about a railway bridge retrofitted by external posttensioning technique will be illustrated.

  18. Relations between decision indicators for implementing technology in healthcare logistics – a bed logistics case study

    DEFF Research Database (Denmark)

    Feibert, Diana Cordes; Jacobsen, Peter

    2015-01-01

    The cost of healthcare is rising and reforms have been introduced across Europe to address the cost issue in healthcare. There is potential to improve logistical processes within healthcare to save costs and at the same time provide services that support high quality patient care. Re......-designing processes and implementing technology can improve the efficiency of processes and reduce costs. A relations diagram has been developed that identifies the effects between the constructs Logistics, Technology, Procedure and Structure. Knowledge about how these constructs affect each other is important when...

  19. Using case studies to teach an engineering technology technical writing class

    Science.gov (United States)

    Green, M. M.

    1981-01-01

    The use of the case method in teaching various technical communication skills is described. Features of the method considered include: solving communication problems, identifying an audience, planning written communications, presenting written communications, and using visual aids.

  20. Designing a Lighting Installation Through Virtual Reality Technology - The Brighter Brunnshög Case Study

    DEFF Research Database (Denmark)

    Kim, Boa; Xylakis, Emmanouil; Predescu, Andrei-Ducu

    2018-01-01

    This paper investigates how VR technology can support the process of designing light installations. Specifically, how visual immersion through digital means can create spatial awareness of an area, without the need of physical presence, thus facilitating the fluency of the design process. The mot...

  1. Selecting a Suitable Cloud Computing Technology Deployment Model for an Academic Institute : A Case Study

    Science.gov (United States)

    Ramachandran, N.; Sivaprakasam, P.; Thangamani, G.; Anand, G.

    2014-01-01

    Purpose: Cloud Computing (CC) technology is getting implemented rapidly in the educational sector to improve learning, research and other administrative process. As evident from the literature review, most of these implementations are happening in the western countries such as USA, UK, while the level of implementation of CC in developing…

  2. Creativity in Technology Education Facilitated through Virtual Reality Learning Environments: A Case Study

    Science.gov (United States)

    Thorsteinsson, Gisli; Page, Tom

    2007-01-01

    Innovation Education (IE) is a new subject area in Icelandic schools. The aim of the subject is to train students to identify the needs and problems in their environment and to develop solutions: a process of ideation. This activity has been classroom based but now a Virtual Reality Learning Environment technology (VRLE) has been designed to…

  3. Harnessing Technology for School Accountability: A Case Study of Implementing a Management Information System

    Science.gov (United States)

    Enomoto, Ernestine K.; Conley, Sharon

    2007-01-01

    Schools employ educational technology to comply with pressures for greater accountability and efficiency in conducting operations. Specifically, schools use "management information systems" designed to automate data collection of student attendance, grades, test scores, and so on. These management information systems (MIS) employed…

  4. Eliciting and Assessing Reflective Practice: A Case Study in Web 2.0 Technologies

    Science.gov (United States)

    Parkes, Kelly A.; Kajder, Sara

    2010-01-01

    This paper focuses on the role of multimodal technologies in facilitating reflective processes and the subsequent assessment of reflectivity for students in pre-professional programs. Reflective practice has been established as a critical tool for developing identity in and on practice. This paper will focus firstly on reviewing salient literature…

  5. Enhancing Economic Stability Utilizing the High Technologies in Community Colleges: A Case Study.

    Science.gov (United States)

    Mehnert, Barbara H.; Kurki, Allan W.

    Strategies to enhance the economic stability of community colleges through high technology approaches are discussed in this paper. First, general economic problems facing higher education are identified, and the ways in which they influence community colleges are described. Next, 10 strategies to aid in the economic recovery of community colleges…

  6. Scaffolding 6th Graders' Problem Solving in Technology-Enhanced Science Classrooms: A Qualitative Case Study

    Science.gov (United States)

    Kim, Minchi C.; Hannafin, Michael J.

    2011-01-01

    In response to the calls to improve and deepen scientific understanding and literacy, considerable effort has been invested in developing sustainable technology-enhanced learning environments to improve science inquiry. Research has provided important guidance for scaffolding learning in mathematics and science. However, these reports have…

  7. Process of technology management in SMEs of the metal processing industry – the case study investigation

    Directory of Open Access Journals (Sweden)

    Krawczyk-Dembicka Elżbieta

    2017-03-01

    Full Text Available The main purpose of this work is to identify the factors that influence the process of technology management in the sector of small- and medium-sized enterprises of the metal processing industry, considering the shape and course required to achieve modern operation conditions by enterprises in the market.

  8. Digital technology and mid-adopting teachers’ professional development : a case study

    NARCIS (Netherlands)

    Drijvers, Paul|info:eu-repo/dai/nl/074302922; Tacoma, Sietske|info:eu-repo/dai/nl/411923080; Mol, Amy; Heuvel, C. van den; Doorman, Michiel|info:eu-repo/dai/nl/126974764; Boon, Peter|info:eu-repo/dai/nl/203374207

    2014-01-01

    The integration of digital technology into secondary mathematics education is not yet a widespread success. As teachers are crucial players in this integration, an important challenge is not only to attract early adopters, but also to support mid-adopting teachers in their professional development

  9. The Bangalore Challenge: Case Studies of the Social Construction of Technology in Elementary Schools

    Science.gov (United States)

    Byker, Erik Jon

    2012-01-01

    As India aspires to become the information and communication technology (ICT) leader in the world, the education of its children is a primary concern. While India's policymakers expect ICT to usher in promising education changes, there is a limited understanding of how computers are used and negotiated in India's schools. This dissertation is an…

  10. A Productivity Analysis of Adopting Information Technology for the Treatment of Autism, with Case Studies

    Science.gov (United States)

    Dao, Philip

    2016-01-01

    The adoption of information technology might improve the productivity of autism treatment centers. Productivity improvement might resolve the problem of the insufficient supply of autism treatment service. The problem caused tremendous financial burdens to private individuals and public healthcare systems. The researcher explored the relationships…

  11. Promoting Community Socio-Ecological Sustainability through Technology: A Case Study from Chile

    Science.gov (United States)

    Aguayo, Claudio; Eames, Chris

    2017-01-01

    The importance of community learning in effecting social change towards ecological sustainability has been recognised for some time. More recently, the use of Information and Communication Technology (ICT) tools to promote socio-ecological sustainability has been shown to have potential in community education for sustainable development (ESD). The…

  12. Using Technology To Bring Abstract Concepts into Focus: A Programming Case Study.

    Science.gov (United States)

    Crews, Thad; Butterfield, Jeff

    2002-01-01

    Discusses the three-step implementation of an instructional technology tool and associated pedagogy to support teaching and learning computer programming concepts. The Flowchart Interpreter (FLINT) was proven through experiments to support novice programmers better than the traditional textbook approach. (EV)

  13. Walker devices and microswitch technology to enhance assisted indoor ambulation by persons with multiple disabilities: three single-case studies.

    Science.gov (United States)

    Lancioni, Giulio E; Singh, Nirbhay N; O'Reilly, Mark F; Sigafoos, Jeff; Oliva, Doretta; Campodonico, Francesca; Buono, Serafino

    2013-07-01

    These three single-case studies assessed the use of walker devices and microswitch technology for promoting ambulation behavior among persons with multiple disabilities. The walker devices were equipped with support and weight lifting features. The microswitch technology ensured that brief stimulation followed the participants' ambulation responses. The participants were two children (i.e., Study I and Study II) and one man (i.e., Study III) with poor ambulation performance. The ambulation efforts of the child in Study I involved regular steps, while those of the child in Study II involved pushing responses (i.e., he pushed himself forward with both feet while sitting on the walker's saddle). The man involved in Study III combined his poor ambulation performance with problem behavior, such as shouting or slapping his face. The results were positive for all three participants. The first two participants had a large increase in the number of steps/pushes performed during the ambulation events provided and in the percentages of those events that they completed independently. The third participant improved his ambulation performance as well as his general behavior (i.e., had a decline in problem behavior and an increase in indices of happiness). The wide-ranging implications of the results are discussed. Copyright © 2013 Elsevier Ltd. All rights reserved.

  14. Standardising the Information Technology Environment at Telstra Corporation: a case study

    Directory of Open Access Journals (Sweden)

    Carey Butler

    1997-05-01

    Full Text Available Telstra is Australia's leading telecommunications carrier and largest single user of information technology (IT. In November 1990, the Australian federal government announced wide-ranging reforms and the introduction of competition within the telecommunications sector. Realising that it was essential for the corporation to leverage its use of technology on a firm-wide basis in order to remain a strong and flexible competitor, in 1991, Telstra embarked upon a major overhaul of its existing IT infrastructure. Central to this was the establishment of standardised operating environments (SOE for all computing resources used at Telstra. This paper traces the development of Telstra's data network and desktop SOEs. The paper examines the strategic drivers for the SOEs, the business benefits, and issues related to Telstra's computing environment prior to, and after the introduction of network and desktop SOEs.

  15. Technology change priorities influencing competition quality promotion: Case study of Iran Keaton Polyester Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Pouria Nour

    2012-10-01

    Full Text Available In the changing world with various customers’ demands the businesses tend to improve their advantages to beat their rivals by means of better quality, lower prices and so. For Iranian polyester market quality is of crucial importance and is achieved through changing and updating technologies. According to highly regarded model of CAPTECH, which is recommended by UNIDO, technology parameters are defined in each phase and not generally as a whole. In the end the biggest gaps are defined. The main goal is to prioritize the main parameters affecting Iranian polyester company's quality. In order to fulfill our goal, 20 high and medium managers were questioned for this paper. The questions were gathered according to UNIDO samples. After a qualitative and quantitative test we concluded that the biggest gap is for supply chain(56.91 and the lowest gap is for combination phase(43.97.

  16. Globalisation of birth markets: a case study of assisted reproductive technologies in India

    OpenAIRE

    Sarojini Nadimpally; Marwah Vrinda; Shenoi Anjali

    2011-01-01

    Abstract The escalation of Assisted Reproductive Technologies (ARTs) in India into a veritable fertility industry is the result of a multitude of reasons. This paper places the bio-genetic industry within the larger political economy framework of globalisation and privatisation, thus employing a framework that is often omitted from discussions on ARTs, but has direct and significant bearings on the ART industry in India. As markets for human organs, tissues and reproductive body parts experie...

  17. Environmental Restoration - Expedient Methods and Technologies: A User Guide with Case Studies

    Science.gov (United States)

    1998-03-01

    Tarradella, Joseph, Gabriel Bitton, and Dominique Rossel. Soil Ecotoxicology . Lewis Publishers, Boca Raton, Florida, 1997. Testa, Stephen M. The Reuse...to the first lift to adjust the nutrients in the soil. No nutrient adjustments were made to the second lift. Each lift was cultivated once or twice a...Technology Transfer Committee, Second Edition, October 1994. Tarradella, Joseph, Gabriel Bitton, and Dominique Rossel. Soil Ecotoxicology . Lewis

  18. Lean diesel technology and human health: a case study in six Brazilian metropolitan regions

    Directory of Open Access Journals (Sweden)

    Paulo Afonso de André

    2012-01-01

    Full Text Available OBJECTIVE: Due to their toxicity, diesel emissions have been submitted to progressively more restrictive regulations in developed countries. However, in Brazil, the implementation of the Cleaner Diesel Technologies policy (Euro IV standards for vehicles produced in 2009 and low-sulfur diesel with 50 ppm of sulfur was postponed until 2012 without a comprehensive analysis of the effect of this delay on public health parameters. We aimed to evaluate the impact of the delay in implementing the Cleaner Diesel Technologies policy on health indicators and monetary health costs in Brazil. METHODS: The primary estimator of exposure to air pollution was the concentration of ambient fine particulate matter (particles with aerodynamic diameters <2.5 μm, [PM2.5]. This parameter was measured daily in six Brazilian metropolitan areas during 2007-2008. We calculated 1 the projected reduction in the PM2.5 that would have been achieved if the Euro IV standards had been implemented in 2009 and 2 the expected reduction after implementation in 2012. The difference between these two time curves was transformed into health outcomes using previous dose-response curves. The economic valuation was performed based on the DALY (disability-adjusted life years method. RESULTS: The delay in implementing the Cleaner Diesel Technologies policy will result in an estimated excess of 13,984 deaths up to 2040. Health expenditures are projected to be increased by nearly US$ 11.5 billion for the same period. CONCLUSIONS: The present results indicate that a significant health burden will occur because of the postponement in implementing the Cleaner Diesel Technologies policy. These results also reinforce the concept that health effects must be considered when revising fuel and emission policies.

  19. Digital technologies in support of flood resilience: A case study for Nepal

    OpenAIRE

    Liu, W.; McCallum, I.; See, L.; Dugar, S.; Laso-Bayas, J.C.

    2016-01-01

    This paper presents ongoing efforts to support flood resilience in the Karnali basin in Nepal through the provision of different forms of digital technology. Flood Risk Geo-Wiki is an online visualization and crowdsourcing tool, which has been adapted to display flood risk maps at the global scale as well as information of relevance to planners and the community at the local level. Community-based flood risk maps, which have traditionally been drawn on paper, are being digitized and integrate...

  20. Internationalisation of Chinese firms: A case study of Huawei Technologies Ltd.

    OpenAIRE

    Huang, Wei

    2006-01-01

    Since the 21st century Chinese firms have started at a grate pace of expanding their business abroad. This has aroused worldwide speculation and tension. By reporting on qualitative research conducted at Huawei Technologies Ltd., this paper analyses Huawei's corporate profile and its internationalisation strategies employed as a latecomer firm. The key issues examined in this paper are: to what extent does Huawei not follow the traditional internationalisation theory, its core competences and...

  1. Evaluating oversight systems for emerging technologies: a case study of genetically engineered organisms.

    Science.gov (United States)

    Kuzma, Jennifer; Najmaie, Pouya; Larson, Joel

    2009-01-01

    The U.S. oversight system for genetically engineered organisms (GEOs) was evaluated to develop hypotheses and derive lessons for oversight of other emerging technologies, such as nanotechnology. Evaluation was based upon quantitative expert elicitation, semi-standardized interviews, and historical literature analysis. Through an interdisciplinary policy analysis approach, blending legal, ethical, risk analysis, and policy sciences viewpoints, criteria were used to identify strengths and weaknesses of GEOs oversight and explore correlations among its attributes and outcomes. From the three sources of data, hypotheses and broader conclusions for oversight were developed. Our analysis suggests several lessons for oversight of emerging technologies: the importance of reducing complexity and uncertainty in oversight for minimizing financial burdens on small product developers; consolidating multi-agency jurisdictions to avoid gaps and redundancies in safety reviews; consumer benefits for advancing acceptance of GEO products; rigorous and independent pre- and post-market assessment for environmental safety; early public input and transparency for ensuring public confidence; and the positive role of public input in system development, informed consent, capacity, compliance, incentives, and data requirements and stringency in promoting health and environmental safety outcomes, as well as the equitable distribution of health impacts. Our integrated approach is instructive for more comprehensive analyses of oversight systems, developing hypotheses for how features of oversight systems affect outcomes, and formulating policy options for oversight of future technological products, especially nanotechnology products.

  2. Lean diesel technology and human health: a case study in six Brazilian metropolitan regions.

    Science.gov (United States)

    André, Paulo Afonso de; Veras, Mariana Matera; Miraglia, Simone Georges El Khouri; Saldiva, Paulo Hilário Nascimento

    2012-01-01

    Due to their toxicity, diesel emissions have been submitted to progressively more restrictive regulations in developed countries. However, in Brazil, the implementation of the Cleaner Diesel Technologies policy (Euro IV standards for vehicles produced in 2009 and low-sulfur diesel with 50 ppm of sulfur) was postponed until 2012 without a comprehensive analysis of the effect of this delay on public health parameters. We aimed to evaluate the impact of the delay in implementing the Cleaner Diesel Technologies policy on health indicators and monetary health costs in Brazil. The primary estimator of exposure to air pollution was the concentration of ambient fine particulate matter (particles with aerodynamic diameters policy will result in an estimated excess of 13,984 deaths up to 2040. Health expenditures are projected to be increased by nearly US$ 11.5 billion for the same period. The present results indicate that a significant health burden will occur because of the postponement in implementing the Cleaner Diesel Technologies policy. These results also reinforce the concept that health effects must be considered when revising fuel and emission policies.

  3. Comparison of end-of-life tire treatment technologies: a Chinese case study.

    Science.gov (United States)

    Li, Xingfu; Xu, He; Gao, Yingnan; Tao, Yijun

    2010-11-01

    The aim of this paper is to compare different end-of-life tire (ELT) treatment technologies in China from an environmental and economic perspective. Four treatment technologies were evaluated: ambient grinding, devulcanization, pyrolysis and illegal tire oil extraction. Life cycle assessment (LCA) was applied to evaluate the potential environmental impact of each treatment based on the Eco-indicator 99 (Hierarchist approach) method provided by GaBi 4 software. The final result shows that pyrolysis represents the environmentally benign option while illegal tire oil extraction caused the worst damages. For the three legal treatments, although high credit was obtained when considering avoided impacts from recycled materials and energy, they have great impact as to respiratory effects (inorganic) dominantly contributed by energy production stage, which implies that the emphasis on environmental policies related to ELT treatment should shift from the control of emissions from treatment process to the reduction of energy consumption. A simplified comparison of net benefits and total impacts shows that the most eco-effective ELT treatment technology is pyrolysis, followed by dynamic devulcanization and ambient grinding. The illegal tire oil extraction, however, must be prohibited immediately because of its highest environmental pollution and lowest net benefit. Copyright © 2010 Elsevier Ltd. All rights reserved.

  4. IT-adoption and the interaction of task, technology and individuals: a fit framework and a case study

    Directory of Open Access Journals (Sweden)

    Iller Carola

    2006-01-01

    Full Text Available Abstract Background Factors of IT adoption have largely been discussed in the literature. However, existing frameworks (such as TAM or TTF are failing to include one important aspect, the interaction between user and task. Method Based on a literature study and a case study, we developed the FITT framework to help analyse the socio-organisational-technical factors that influence IT adoption in a health care setting. Results Our FITT framework ("Fit between Individuals, Task and Technology" is based on the idea that IT adoption in a clinical environment depends on the fit between the attributes of the individual users (e.g. computer anxiety, motivation, attributes of the technology (e.g. usability, functionality, performance, and attributes of the clinical tasks and processes (e.g. organisation, task complexity. We used this framework in the retrospective analysis of a three-year case study, describing the adoption of a nursing documentation system in various departments in a German University Hospital. We will show how the FITT framework helped analyzing the process of IT adoption during an IT implementation: we were able to describe every found IT adoption problem with regard to the three fit dimensions, and any intervention on the fit can be described with regard to the three objects of the FITT framework (individual, task, technology. We also derive facilitators and barriers to IT adoption of clinical information systems. Conclusion This work should support a better understanding of the reasons for IT adoption failures and therefore enable better prepared and more successful IT introduction projects. We will discuss, however, that from a more epistemological point of view, it may be difficult or even impossible to analyse the complex and interacting factors that predict success or failure of IT projects in a socio-technical environment.

  5. Understanding Technology and People Issues in Hospital Information System (HIS) Adoption: Case study of a tertiary hospital in Malaysia.

    Science.gov (United States)

    Zakaria, Nasriah; Mohd Yusof, Shafiz Affendi

    Hospital Information Systems (HIS) can improve healthcare outcome quality, increase efficiency, and reduce errors. The government of Malaysia implemented HIS across the country to maximize the use of technology to improve healthcare delivery, however, little is known about the benefits and challenges of HIS adoption in each institution. This paper looks at the technology and people issues in adopting such systems. The study used a case study approach, using an in-depth interview with multidisciplinary medical team members who were using the system on a daily basis. A thematic analysis using Atlas.ti was employed to understand the complex relations among themes and sub-themes to discover the patterns in the data. . Users found the new system increased the efficiency of workflows and saved time. They reported less redundancy of work and improved communication among medical team members. Data retrieval and storage were also mentioned as positive results of the new HIS system. Healthcare workers showed positive attitudes during training and throughout the learning process. From a technological perspective, it was found that medical workers using HIS has better access and data management compared to the previously used manual system. The human issues analysis reveals positive attitudes toward using HIS among the users especially from the physicians' side. Copyright © 2016. Published by Elsevier Ltd.

  6. Environmental restoration: Integrating hydraulic control of groundwater, innovative contaminant removal technologies and wetlands restoration--A case study at SRS

    International Nuclear Information System (INIS)

    Lewis, C.M.; Serkiz, S.M.; Adams, J.; Welty, M.

    1992-01-01

    The groundwater remediation program at the F and H Seepage Basins, Savannah River Sits (SRS) is a case study of the integration of various environmental restoration technologies at a single waste site. Hydraulic control measures are being designed to mitigate the discharge of groundwater plumes to surface water. One of the primary constituents of the plumes is tritium. An extraction and reinjection scenario is being designed to keep the tritium in circulation in the shallow groundwater, until it can naturally decay. This will be accomplished by extracting groundwater downgradient of the waste sites, treatment, and reinjection of the tritiated water into the water table upgradient of the basins. Innovative in-situ technologies, including electrolytic migration, are being field tested at the site to augment the pump-treat-reinject system. The in-situ technologies target removal of contaminants which are relatively immobile, yet represent long term risks to human health and the environment. Wetland restoration is an integral part of the F and H remediation program. Both in-situ treatment of the groundwater discharging the wetlands to adjust the pH, and replacement of water loss due to the groundwater extraction program ar being considered. Toxicity studies indicate that drought and the effects of low pH groundwater discharge have been factors in observed tree mortality in wetlands near the waste sites

  7. Enhancement of Cognitive Processing by Multiple Sclerosis Patients Using Liquid Cooling Technology: A Case Study

    Science.gov (United States)

    Montgomery, Leslie D.; Ku, Yu-Tsuan E.; Montgomery, Richard W.; Kliss, Mark (Technical Monitor)

    1997-01-01

    Recent neuropsychological studies demonstrate that cognitive dysfunction is a common symptom in patients with multiple sclerosis. In many cases the presence of cognitive impairment affects the patient's daily activities to a greater extent than would be found due to their physical disability alone. Cognitive dysfunction can have a significant impact on the quality of life of both the patient and that of their primary caregiver. Two cognitively impaired male MS patients were given a visual discrimination task before and after a one hour cooling period. The subjects were presented a series of either red or blue circles or triangles. One of these combinations, or one fourth of the stimuli, was designated as the "target" presentation. EEG was recorded from 20 scalp electrodes using a Tracor Northern 7500 EEG/ERP system. Oral and ear temperatures were obtained and recorded manually every five minutes during the one hour cooling period. The EEG ERP signatures from each series of stimuli were analyzed in the energy density domain to determine the locus of neural activity at each EEG sampling time. The first subject's ear temperature did not decrease during the cooling period. It was actually elevated approximately 0.05 C by the end of the cooling period compared to his mean of control period value. In turn, Subject One's discrimination performance and cortical energy remained essentially the same after body cooling. In contrast, Subject Two's ear temperature decreased approx. 0.8 C during his cooling period. Subject Two's ERROR score decreased from 12 during the precooling control period to 2 after cooling. His ENERGY value increased approximately 300%, from a precooling value of approximately 200 to a postcooling value of nearly 600. These findings might be interpreted by the following three-part hypothesis: (1) the general cognitive impairment of MS patients may be a result of low or unfocused metabolic energy conversion in the cortex; (2) such differences show up most

  8. Outsourcing a High Speed Internet Access Project: An Information Technology Class Case Study in Three Parts

    Science.gov (United States)

    Platt, Richard G.; Carper, William B.; McCool, Michael

    2010-01-01

    In early 2004, the Hilton Hotels Corporation (HHC) required that all of its hotels (both owned and franchised) install high-speed Internet access (HSIA) in all of their rooms by June 2004. This case focuses on how one of its franchise properties located on the northern gulf coast of Florida (the Hilton Sandestin Beach Golf Resort &…

  9. Information and communication technology in disease surveillance, India: a case study

    Directory of Open Access Journals (Sweden)

    Krishnan Sampath K

    2010-12-01

    Full Text Available Abstract India has made appreciable progress and continues to demonstrate a strong commitment for establishing and operating a disease surveillance programme responsive to the requirements of the International Health Regulations (IHR[2005]. Within five years of its launch, India has effectively used modern information and communication technology for collection, storage, transmission and management of data related to disease surveillance and effective response. Terrestrial and/or satellite based linkages are being established within all states, districts, state-run medical colleges, infectious disease hospitals, and public health laboratories. This network enables speedy data transfer, video conferencing, training and e-learning for outbreaks and programme monitoring. A 24x7 call centre is in operation to receive disease alerts. To complement these efforts, a media scanning and verification cell functions to receive reports of early warning signals. During the 2009 H1N1 outbreak, the usefulness of the information and communication technology (ICT network was well appreciated. India is using ICT as part of its Integrated Disease Surveillance Project (IDSP to help overcome the challenges in further expansion in hard-to-reach populations, to increase the involvement of the private sector, and to increase the use of other modes of communication like e-mail and voicemail.

  10. Information and communication technology in disease surveillance, India: a case study.

    Science.gov (United States)

    Kant, Lalit; Krishnan, Sampath K

    2010-12-03

    India has made appreciable progress and continues to demonstrate a strong commitment for establishing and operating a disease surveillance programme responsive to the requirements of the International Health Regulations (IHR[2005]). Within five years of its launch, India has effectively used modern information and communication technology for collection, storage, transmission and management of data related to disease surveillance and effective response. Terrestrial and/or satellite based linkages are being established within all states, districts, state-run medical colleges, infectious disease hospitals, and public health laboratories. This network enables speedy data transfer, video conferencing, training and e-learning for outbreaks and programme monitoring. A 24x7 call centre is in operation to receive disease alerts. To complement these efforts, a media scanning and verification cell functions to receive reports of early warning signals. During the 2009 H1N1 outbreak, the usefulness of the information and communication technology (ICT) network was well appreciated. India is using ICT as part of its Integrated Disease Surveillance Project (IDSP) to help overcome the challenges in further expansion in hard-to-reach populations, to increase the involvement of the private sector, and to increase the use of other modes of communication like e-mail and voicemail.

  11. A Contribution to Guide the Use of Support Tools for Technology Roadmapping: a Case Study in the Clothing Industry

    Directory of Open Access Journals (Sweden)

    Cindy Johanna Ibarra González

    2013-12-01

    Full Text Available This article presents guidelines regarding the use of tools to support technology roadmapping based on a case study of an exploratory and descriptive nature in a small company in the clothing sector. After introducing a systematic approach to technology roadmapping with their support tools, an empirical analysis is then presented of the application of the tools of the market layer – a questionnaire for consultation with the consumers and bibliographical research – and the business layer – SWOT matrix, through illustrative examples. Each tool was analyzed in relation to the complexity, time, cost of implementation, relevance and quality of the resulting information, the most common problems associated with their use. Here we show that the tools of the market layer proved to be easiest to use when compared with the tools of business layer, varying the time required, but involving, in general, a low cost in its application to obtain relevant and quality results for the development of the roadmap. Based on the results, general guidelines for the use of these tools to assist in the process of technology roadmapping were established as well as a comparison between the tools.

  12. STS-Astro: Astronomy in the focus of Science, Technology and Society and Case Study in Education Distance

    Science.gov (United States)

    Ferreira, O. R.

    2014-02-01

    The dissertation addresses the focus of Astronomy in Science, Technology and Society [STS}, which the author calls the STS-Astro. Observes the International Year of the Astronomy 2009 [IYA 2009] as one of the greatest experiences STS worldwide, causing unprecedented integration between science, technology and humanities, with positive impacts in many sectors of society and are still worthy of study, specially in Brazil due to the implementation of the International Year of Astronomy, Brazil 2009 [IYABrazil-2009}. Astronomy is also investigated in the area of Education, based mainly on theoretical aspects of educational socio-interacionist of Lev Semenovich Vygotsky (Vygotsky, 1991, 2008 and 2012, p. 103-117) and socio-historical cultural of Paulo Reglus Neves Freire (1979, 1982 and 1996), but when necessary and still keeping the field of constructivism, properly taking advantage of the interactionism and transdisciplinarity of Jean William Fritz Piaget (1983). Concerning Distance Education [DE], it is noted significant growth at the graduate and postgraduate courses. New challenges arise, with the establishment of an increasingly accustomed to Information and Communication Technologies [ICT] and the teaching methodologies to be used and developed, with Astronomy becoming an important instrument in the teaching-learning process associated technologies. Using the methodology of action research, we proceeded with a case study involving 26 students of the discipline of Astronomy Topics applied to Education, between November 1 and December 17, 2012, of the postgraduation courses in Distance Education at the Universidade Cruzeiro do Sul [Southern Cross University]. The results obtained permit statistical surveys therefore quantitative, but also qualitative information about the teaching-learning Astronomy by DE. Analyses of performance and progress of each student and set permit a finding interaction among those involved in the mediation of the teacher-tutor who, in turn

  13. An assessment method and a case study of rural electrification technologies

    International Nuclear Information System (INIS)

    Muguerza, D.; Santander, P.R.; Bordon, H.C.; Gomez, A.R.

    1991-01-01

    From 1985 to 1987, a research team from the Institute of Energy Economics and the National University of Misiones, Argentina, in co-operation with Obera University Foundation, Argentina and the International Development Research Centre, Canada, developed a comprehensive method for analyzing electric power supply alternatives in depressed rural areas as an integral part of the development planning. The method compares the economics of centralized and decentralized power supply systems, including all conventional and non-conventional technology alternatives, and is based on the natural resources and development of the region. It also provides a method for the analytical processing of data on the energy requirements of rural populations and makes it possible to determine energy consumption by use and income level of a rural family resulting in a realistic estimation of the electric power supply needs. 3 tabs

  14. Technological or tradicional tools for documents' corrections? A Case study in higher education

    Directory of Open Access Journals (Sweden)

    Zein Kallas

    2012-09-01

    Full Text Available Information and Communication Technology is playing an important role in assisting teachers in their activities. They became a more efficient, b more precise and c more comprehensive. The “Audio” ad is a clear illustration for this trend. Students’ acceptance of the “Audio” tool has been analysed and compared with the “traditional” correction and the “track change”. 57 students have answered a structured questionnaire using a web 2.0 application for creating an online form. Results show a high relative importance for the “Audio” correction (42.02% of, followed by the “track change” and the “traditional printed document” with 33.02% and 24.95% respectively.

  15. Selected case studies of technology transfer from mission-oriented applied research

    Energy Technology Data Exchange (ETDEWEB)

    Daellenbach, K.K.; Watts, R.L.; Young, J.K. [Pacific Northwest Lab., Richland, WA (United States); Abarcar, R.B. [Energetics, Inc., Columbia, MD (United States)

    1992-07-01

    The US Department of Energy (DOE) Advanced Industrial Concepts Division (AICD) under the Office of Industrial Technologies (OIT) supports interdisciplinary applied research and exploratory development that will expand the knowledge base to enable industry to improve its energy efficiency and its capability to use alternative energy resources. AICD capitalizes on scientific and technical advances from the United States and abroad, applying them to address critical technical needs of American industry. As a result, AICD research and development products are many and varied, and the effective transfer of these products to diverse targeted users requires different strategies as well. This paper describes the products of AICD research, how they are transferred to potential users, and how actual transfer is determined.

  16. Teacher Use of Instructional Technology in a Special Education School for Students with Intellectual Disabilities: A Case Study

    Directory of Open Access Journals (Sweden)

    Canan Sola Özgüç

    2014-01-01

    Full Text Available The purpose of this study was to investigate use of Instructional Technology (IT by special education teachers in a school for students with moderate to severe intellectual disability (ID. Research questions were a Which IT do teachers use during class time? b What are the ways of providing IT? (c What are the problems that teachers encountered while using IT? (d What are the results and effects of the encountered problems? (e Is there any use of assistive technology (AT devices? This is a case study based on collecting and analyzing qualitative data. Semi-structured interviews were conducted with nine teachers; students with moderate to severe ID in the first, second, fifth, and seventh grade were observed in social studies lessons, as were eight teachers of those students. The study showed that use of IT is limited in a special school for children with ID and this situation is affecting teachers and students in a negative way. Also, use of AT is lacking

  17. A Case Study of Mobile Technology-enabled English Language Learning: the Amazon Kindle e-Reader Initiative in Palestine

    Directory of Open Access Journals (Sweden)

    Khitam Yousuf Shraim

    2014-06-01

    Full Text Available The proliferation of increasingly interactive e-reader devices such as the Amazon Kindle represents an opportunity to explore their evolving pedagogical value. This study aims to investigate how use of the Kindle can enhance individuals’ English language learning—more specifically their attitudes, reading comprehension, vocabulary development and pronunciation performance—in the context of informal and lifelong learning in Palestine, and to explore the further potential of scaling up the use of e-readers at a national level. At the piloting stage of this initiative, the study operated at two levels (micro and meso of the M3 evaluation framework. Mixed methods were used: qualitative data were obtained through a case study of the practices and perceptions of two teachers in two classrooms in the Qalqilia center and quantitative data were collected through a survey of 114 learners. The study shows that the Kindle’s technological affordances are effective in creating a flexible, authentic and interactive environment for English language learning, provided that teachers change their teaching methods to take full advantage of the features of mobile technologies to create innovative learning approaches aligned with the needs of the e-generation. It was also found that despite some concerns with the usability issue, attitudes towards learning English changed positively and learners’ vocabulary and pronunciation improved.

  18. Grid Load Shifting and Performance Assessments of Residential Efficient Energy Technologies, a Case Study in Japan

    Directory of Open Access Journals (Sweden)

    Yanxue Li

    2018-06-01

    Full Text Available The increasing penetration of renewable energy decreases grid flexibility; thus, decentralized energy management or demand response are emerging as the main approaches to resolve this limitation and to provide flexibility of resources. This research investigates the performance of high energy efficiency appliances and grid-integrated distributed generators based on real monitored data from a social demonstration project. The analysis not only explores the potential cost savings and environmental benefits of high energy efficiency systems in the private sector, but also evaluates public grid load leveling potential from a bottom-up approach. This research provides a better understanding of the behavior of high decentralized efficient energy and includes detailed scenarios of monitored power generation and consumption in a social demonstration project. The scheduled heat pump effectively lifts valley load via transforming electricity to thermal energy, its daily electricity consumption varies from 4 kWh to 10 kWh and is concentrated in the early morning over the period of a year. Aggregated vehicle to home (V2H brings flexible resources to the grid, by discharging energy to cover the residential night peak load, with fuel cost savings attributed to 90% of profit. The potential for grid load leveling via integrating the power utility and consumer is examined using a bottom-up approach. Five hundred thousand contributions from scheduled electrical vehicles (EVs and fuel cells provide 5.0% of reliable peak power capacity at 20:00 in winter. The outcome illustrates the energy cost saving and carbon emission reduction scenarios of each of the proposed technologies. Relevant subsidies for heat pump water heater systems and cogeneration are essential customers due to the high initial capital investment. Optimal mixes in structure and coordinated control of high efficiency technologies enable customers to participate in grid load leveling in terms of

  19. Japan's post-Fukushima reconstruction: A case study for implementation of sustainable energy technologies

    International Nuclear Information System (INIS)

    Nesheiwat, Julia; Cross, Jeffrey S.

    2013-01-01

    Following World War II, Japan miraculously developed into an economic powerhouse and a model of energy efficiency among developed countries. This lasted more than 65 years until the Northeastern Japan earthquake and tsunami induced nuclear crisis of March 2011 brought Japan to an existential crossroads. Instead of implementing its plans to increase nuclear power generation capacity from thirty percent to fifty percent, Japan shut-down all fifty-four nuclear reactors for safety checks and stress-checks (two have since been restarted), resulting in reduced power generation during the summer of 2012. The reconstruction of Northeastern Japan approaches at a time when the world is grappling with a transition to sustainable energy technologies—one that will require substantial investment but one that would result in fundamental changes in infrastructure and energy efficiency. Certain reconstruction methods can be inappropriate in the social, cultural and climatic context of disaster affected areas. Thus, how can practitioners employ sustainable reconstructions which better respond to local housing needs and availability of natural energy resources without a framework in place? This paper aims at sensitizing policy-makers and stakeholders involved in post disaster reconstruction by recognizing advantages of deploying sustainable energy technologies, to reduce dependence of vulnerable communities on external markets. - Highlights: • We examine the energy challenges faced by Japan in the aftermath of Fukushima. • We identify policy measures for the use of energy technologies applicable to disaster prone nations. • We evaluate the potential for renewable energy to support reduced reliance on nuclear energy in Japan. • We model scenarios for eco-towns and smart-cities in post-disaster reconstruction. • We assess the role of culture in formulating energy policy in post-disaster reconstruction

  20. Using information technology governance, risk management and compliance (GRC as a creator of business values – a case study

    Directory of Open Access Journals (Sweden)

    Sam Lubbe

    2011-08-01

    Full Text Available The relationship between Information Technology (IT Governance, Risk Management and Compliance (GRC and organisation business values continues to interest academics and practitioners (IT Governance Institute, 2003. Like governance, risk management and compliance generally, IT GRC is about the decision rights and accountabilities that encourage desirable behaviour in the use of IT (IT Governance Institute, 2003. A case study approach was used in an organisation with many business units. The organisation selected is a mining company, RioZim, situated in Zimbabwe. Data was collected from business units on IT issues and business values. The interviews centred on the IT GRC practices based on responsibility and authority for IT decision making. The results suggest that IT GRC does not adequately support business values. The study revealed that business values should drive IT GRC and IT GRC should be the responsibility of executives and all business units.

  1. Advancing Geospatial Technologies in Science and Social Science: A Case Study in Collaborative Education

    Science.gov (United States)

    Williams, N. A.; Morris, J. N.; Simms, M. L.; Metoyer, S.

    2007-12-01

    The Advancing Geospatial Skills in Science and Social Sciences (AGSSS) program, funded by NSF, provides middle and high school teacher-partners with access to graduate student scientists for classroom collaboration and curriculum adaptation to incorporate and advance skills in spatial thinking. AGSSS Fellows aid in the delivery of geospatially-enhanced activities utilizing technology such as geographic information systems, remote sensing, and virtual globes. The partnership also provides advanced professional development for both participating teachers and fellows. The AGSSS program is mutually beneficial to all parties involved. This successful collaboration of scientists, teachers, and students results in greater understanding and enthusiasm for the use of spatial thinking strategies and geospatial technologies. In addition, the partnership produces measurable improvements in student efficacy and attitudes toward processes of spatial thinking. The teacher partner training and classroom resources provided by AGSSS will continue the integration of geospatial activities into the curriculum after the project concludes. Time and resources are the main costs in implementing this partnership. Graduate fellows invest considerable time and energy, outside of academic responsibilities, to develop materials for the classroom. Fellows are required to be available during K-12 school hours, which necessitates forethought in scheduling other graduate duties. However, the benefits far outweigh the costs. Graduate fellows gain experience in working in classrooms. In exchange, students gain exposure to working scientists and their research. This affords graduate fellows the opportunity to hone their communication skills, and specifically allows them to address the issue of translating technical information for a novice audience. Teacher-partners and students benefit by having scientific expertise readily available. In summation, these experiences result in changes in teacher

  2. Motor Assembly Plant Saves$85,000 with Compressed Air System Improvements (Bodine Electric's Chicago Facility): Office of Industrial Technologies (OIT) BestPractices Technical Case Study

    International Nuclear Information System (INIS)

    Wogsland, J.

    2001-01-01

    This case study is one in a series on industrial firms who are implementing energy efficient technologies and system improvements into their manufacturing processes. This case study documents the activities, savings, and lessons learned on the Bodine Electric motor assembly plant project

  3. Compressed Air System Modifications Improve Efficiency at a Plastics Blow Molding Plant (Southeastern Container Plant): Office of Industrial Technologies (OIT) BestPractices Technical Case Study

    Energy Technology Data Exchange (ETDEWEB)

    Wogsland, J.

    2001-06-18

    This case study is one in a series on industrial firms who are implementing energy efficient technologies and system improvements into their manufacturing processes. This case study documents the activities, savings, and lessons learned on the plastics blow molding plant project.

  4. Designing Optical Spreadsheets-Technological Pedagogical Content Knowledge Simulation (S-TPACK): A Case Study of Pre-Service Teachers Course

    Science.gov (United States)

    Thohir, M. Anas

    2018-01-01

    In the 21st century, the competence of instructional technological design is important for pre-service physics teachers. This case study described the pre-service physics teachers' design of optical spreadsheet simulation and evaluated teaching and learning the task in the classroom. The case study chose three of thirty pre-service teacher's…

  5. INFORMATION TECHNOLOGY USERS´ ABILITIES: A CASE STUDY ON COMPUTING LEARNING IN AN UNDERGRADUATE COURSE

    Directory of Open Access Journals (Sweden)

    Valéria Maria Martins Judice

    2006-11-01

    Full Text Available Literature review shows minimum ability levels of Information Technology (IT resources in use are currently essential to administrators and to professionals overall. As effective as Internet may be, new milestones for economic competition and company survival are being created. It is thus required that individual IT abilities are continuously reformulated to be adequately and creatively used, and new information sources and tools actively generated, rather than passively adopted. In evaluating the evolution of the IT abilities’ acquisition in Brazil, students of Business & Administration from a university are investigated. By means of questionnaire and in-depth interview application, data were collected on students’ perceptions of acquired abilities and importance of IT competencies. Together, computing science teachers and a course coordinator views were assessed. Empirical results obtained revealed that students' IT abilities were concentrated on basic computing science functions. The integration of IT learning in classroom practices was deemed poor as compared to importance attributed. Students signalized self-sufficiency or knowledge attitudes which, as tested, have not been actually proved. Low learning results were observed on IT conceptual knowledge, indicating students’ impatience with learning without interaction, as in long-text readings or teacher-centered classes. Strong student resistance to electronic commerce was evidenced and associated to perceived risks on IT evolution.

  6. Expert system technologies for Space Shuttle decision support: Two case studies

    Science.gov (United States)

    Ortiz, Christopher J.; Hasan, David A.

    1994-01-01

    This paper addresses the issue of integrating the C Language Integrated Production System (CLIPS) into distributed data acquisition environments. In particular, it presents preliminary results of some ongoing software development projects aimed at exploiting CLIPS technology in the new mission control center (MCC) being built at NASA Johnson Space Center. One interesting aspect of the control center is its distributed architecture; it consists of networked workstations which acquire and share data through the NASA/JSC-developed information sharing protocol (ISP). This paper outlines some approaches taken to integrate CLIPS and ISP in order to permit the development of intelligent data analysis applications which can be used in the MCC. Three approaches to CLIPS/IPS integration are discussed. The initial approach involves clearly separating CLIPS from ISP using user-defined functions for gathering and sending data to and from a local storage buffer. Memory and performance drawbacks of this design are summarized. The second approach involves taking full advantage of CLIPS and the CLIPS Object-Oriented Language (COOL) by using objects to directly transmit data and state changes from ISP to COOL. Any changes within the object slots eliminate the need for both a data structure and external function call thus taking advantage of the object matching capabilities within CLIPS 6.0. The final approach is to treat CLIPS and ISP as peer toolkits. Neither is embedded in the other; rather the application interweaves calls to each directly in the application source code.

  7. Politicking information technology strategy in organisations: A case study of a selected organisation in South Africa

    Directory of Open Access Journals (Sweden)

    Michael Twum-Darko

    2015-06-01

    Full Text Available The paper discusses the impact of organisational polities on IT strategy formulation and implementation in an organisation. The objective is to determine the extent of organisational polities on strategy implementation in an organisation. The paper considered the interplay between stakeholders in influencing IT strategy formulation and implementation in an organisation as a socially constructed phenomenon. Thus, the phenomenon can be interpreted and understood by using social theories such Structuration Theory. Hence the paper adopted ANT as a lens through which to understand and interpret the sociotechnical processes associated with IT strategy formulation and implementation in an organisation. Through IT strategy, many organisations attempt to set out key directions and objectives for the use and management of information, communication and technologies. A shared view among these organisations is that IT strategy allows all parts of the organisation to gain a shared understanding of priorities, goals and objectives for both current and future states as defined in the organisational strategy. It is therefore arguable that IT strategy, for the foreseeable future will remain a key aspect of development within organisations. As a result, there has been more focus on how IT strategy is formulated and articulated. What is missing though, is less attention to the implementation of it. Using interpretive research philosophy and employing semi-structured interviews as data collection instrument, this paper attempts to suggest a matrix that will assist organisation to comprehend and deal with organisational politics to reduce its negative impact on IT strategy formulation and implementation in an organisation

  8. Impact of technical and technological changes on energy efficiency of production company - case study

    Science.gov (United States)

    Szwedzka, K.; Gruszka, J.; Szafer, P.

    2016-08-01

    Improving energy efficiency is one of the strategic objectives of the European Union for rational energy economy. To make efforts to improve energy efficiency have been obliged both small and large end-users. This article aims to show the possibilities of improving energy efficiency by introducing technical and technological process changes of pine lumber drying. The object of the research is process of drying lumber implemented in a production company, which is a key supplier of large furniture manufacturer. Pine lumber drying chamber consume about 45% of total electricity in sawmill. According to various sources, drying of 1m3 of lumber uses about 3060kWh and is dependent of inter alia: the drying process itself, the factors affecting the processing time and the desired output moisture content of the timber. The article proposals for changes in the process of drying lumber pine have been positively validated in the company, and as a result their energy consumption per 1 m3 of product declined by 18%.

  9. Nuclear and Energy Research Institute (1956-2000). A case study under the science, technology and brazilian culture history

    International Nuclear Information System (INIS)

    Gordon, Ana Maria Pinho Leite

    2003-01-01

    We analysed a period of the contemporary Brazilian history with the aim to discuss the inter-relationship between science, technology (S and T) and culture in a developing country, showing as a background for a case of study the history of the 'Instituto de Pesquisas Energeticas e Nucleares'. The history of Science and Technology, as a result of the human brain ability of innovate using the resources offered by nature, it is not only the description of successive findings carried out by talented men. It is a reflex of determined age of history as a consequence of accumulated knowledge connected also to human and cultural relationships, which together leads to the scientific and technological progress. In fact, the human brain and society march along together and can not be separated in this journey. In our study we recovered the initial steps of IPEN's outbreak; inserted its achievements in the context of the national policy for nuclear technology and evaluated how this policy was a reply of the governmental organizations to the worldwide situation. Finally, we spread the scientific ideas and technological findings of this institution, who has translate much of the life style and culture of our society. For this purposes, we analysed internal technical report series elaborated by several researchers and few testimonies. The Institution developed the fuel cycle technology, supplied radioisotopes for medical diagnosis and treatment purposes, generating economic resources for our country. The nuclear techniques are a relevant tool for researchers of this Institution applied for several purposes, including the assessment of the radioactivity levels in the environment, radioprotection, etc. Besides those applications, other techniques including the laser technology, the fuel cell, corrosion studies, etc, were implemented as a result of the improved capabilities and skills acquired during the almost 50 years of the Institute's existence. We make evident two strong

  10. Bringing the Classroom into the World: Three Reflective Case Studies of Designing Mobile Technology to Support Blended Learning for the Built and Landscaped Environment

    Science.gov (United States)

    Smith, Wally; Lewi, Hannah; Saniga, Andrew; Stickells, Lee; Constantinidis, Dora

    2017-01-01

    We report and reflect on three projects, carried out by us as educators and technology researchers over a four year period, that explore the use of mobile technologies in the fieldwork of Australian tertiary students of architectural history, landscape history and urban design. Treating these as three case studies, our focus is on the emerging…

  11. A Multi-Case Study of University Students' Language-Learning Experience Mediated by Mobile Technologies: A Socio-Cultural Perspective

    Science.gov (United States)

    Ma, Qing

    2017-01-01

    Emerging mobile technologies can be considered a new form of social and cultural artefact that mediates people's language learning. This multi-case study investigates how mobile technologies mediate a group of Hong Kong university students' L2 learning, which serves as a lens with which to capture the personalised, unique, contextual and…

  12. Technological characterization of a mineral deposit. A case study: the niobium of Catalao I, Goias State, Brazil

    International Nuclear Information System (INIS)

    Sant'Agostino, Lilia Mascarenhas

    1996-01-01

    This thesis presents a contribution to the subject of ore technological characterization integrated to orebody context, regarding sample, ore characteristics, ore types definition and distribution through the mineral occurrence, and ore reserves modeling using technological parameters. A professional experience in this specialization based a conceptual discussion of the matter, supported by a practical approach. The initial approach is the subject definition, and it's importance for technological and economical feasibility studies, in all phases of mining research and development, as a tool for beneficiation alternatives definition. The multidisciplinary aspect of the knowledge involved for ore characterization is remarked, considering that is an interface segment to be conduced interactively with others. It is an applied mineralogy, that needs some geological and some ore dressing imputes. After the general considerations about importance and applicability, it follows a methodological approach of laboratory procedures and analytical techniques, as a result of practical experience acquired in the study of several ores. The main points discussed are related with criterion to organized laboratory preparation scheme and to select appropriated analytical techniques, without detailing them, for what some specialized bibliography is indicated. Finalizing the theoretical explanation, there is a concise description about computers resources for 3D orebody modeling, and integrated software applied for geology and mining. For illustration, it is exposed a complex ore case study: niobium mineralization associated with the alkaline-carbonatitic occurrence of Catalao I, located in Goias State, Brazil. Besides the explanation of laboratory procedures and methods applied, results treatment and interpretation are emphasized, under both characterization and economic point of view. (author)

  13. ENTEL: A Case Study on Knowledge Networks and the Impact of Web 2.0 Technologies

    Science.gov (United States)

    Griffiths, Paul; Arenas, Teresita

    2014-01-01

    This study re-visits an organisation that defined its knowledge-management strategy in 2008-9 applying an established strategy-intellectual capital alignment framework. It addresses questions "How has knowledge management evolved at ENTEL, and what lessons can be learnt? Does the strategy-knowledge management alignment framework applied at…

  14. Teaching the "Diagonalization Concept" in Linear Algebra with Technology: A Case Study at Galatasaray University

    Science.gov (United States)

    Yildiz Ulus, Aysegul

    2013-01-01

    This paper examines experimental and algorithmic contributions of advanced calculators (graphing and computer algebra system, CAS) in teaching the concept of "diagonalization," one of the key topics in Linear Algebra courses taught at the undergraduate level. Specifically, the proposed hypothesis of this study is to assess the effective…

  15. A case study of technology transfer: Rehabilitative engineering at Rancho Los Amigos Hospital. [prosthetic devices engineering

    Science.gov (United States)

    Hildred, W.

    1973-01-01

    The transfer of NASA technolgy to rehabilitative applications of artificial limbs is studied. Human factors engineering activities range from orthotic manipulators to tiny dc motors and transducers to detect and transmit voluntary control signals. It is found that bicarbon implant devices are suitable for medical equipment and artificial limbs because of their biological compatibility with human body fluids and tissues.

  16. The Use of Mobile Technologies in Project-Based Science: A Case Study

    Science.gov (United States)

    Avraamidou, Lucy

    2013-01-01

    The main aim of this study was to examine how a group of elementary students perceived their engagement in a project-based science intervention investigating the water quality of a local lake. The students collaborated with a scientist to conduct various experiments and used handheld computers to collect and analyze data in order to examine the…

  17. Performation Metrics Development Analysis for Information and Communications Technology Outsourcing: A Case Study

    Science.gov (United States)

    Travis, James L., III

    2014-01-01

    This study investigated how and to what extent the development and use of the OV-5a operational architecture decomposition tree (OADT) from the Department of Defense (DoD) Architecture Framework (DoDAF) affects requirements analysis with respect to complete performance metrics for performance-based services acquisition of ICT under rigid…

  18. Gaps in Management Education: A Case Study of University of Management and Technology

    Science.gov (United States)

    Abdur-Raouf; Kalim, Rukhsana; Siddiqi, Ahmed F.

    2010-01-01

    This paper aims to identify the gaps in management education highlighted by 3 primary stakeholders: students, faculty and alumni. The study tries to address the issue of relevance and compatibility of management education and investigates areas of improvement perceived by respondents. The paper assumes that business departments of universities…

  19. The Ford Partnership for Advanced Studies: A New Case for Curriculum Integration in Technology Education

    Science.gov (United States)

    Zinser, Richard; Poledink, Paul

    2005-01-01

    The Ford Motor Company launched a new pre-engineering curriculum for high schools in the Fall of 2004. Building on an earlier manufacturing program, the development process for the Ford Partnership for Advanced Studies took approximately three years. Ford and the course designers wanted the new program to incorporate the best principles and…

  20. CASE STUDY

    African Journals Online (AJOL)

    HIV infection has several oral manifestations, including oral candidiasis and oral hairy leucoplakia. Occasionally unusual presentations requiring rigorous investigations are seen, and in these cases the diagnosis sometimes remains a dilemma owing to limited investigation facilities.1-3 We present the case of a patient who.

  1. Engineering, technology and science disciplines and gender difference: a case study among Indian students

    Science.gov (United States)

    Cheruvalath, Reena

    2018-01-01

    It is proposed to examine the argument that females cannot perform better in engineering and science fields because of their poor mathematical or logical reasoning. The major reason for the reduced number of females in the above fields in India is the socio-cultural aversion towards females choosing the field and restriction in providing higher education for them by their parents. The present study shows that the females who get the opportunity to study engineering and science perform equal to or better than their male counterparts. An analysis of CGPA (Cumulative Grade Point Average) of 2631 students who have completed their engineering or science programme in one of the top engineering colleges in India for five years shows that female academic performance is equal to or better than that of males. Mathematical, logical, verbal and mechanical reasoning are tested while calculating CGPA.

  2. Using Mobile Technology to Enhance Undergraduate Student Digital Information Literacy Skills: A Canadian Case Study

    OpenAIRE

    Alice Schmidt Hanbidge; Nicole Sanderson; Tony Tin

    2015-01-01

    Learning essential information literacy skills through the use of mobile phones is an innovative mlearning pilot project that was collaboratively undertaken in a Canadian university college over the course of two academic terms by faculty and the library staff. The research pilot project involved ninety one undergraduate students in five different classes majoring in psychology, social work, education or social development studies in an attempt to determine the effectiveness of us...

  3. Perceived effectiveness of training and development: a case study in stc technologies pvt ltd., chennai

    OpenAIRE

    Swaminathan, j; Gowri shankar, u

    2011-01-01

    Training is the act of increasing the knowledge and skill of an employee for doing particular job .The training is to acquire new skill, technical knowledge, problemsolving, etc. Training improves the performance of employees on present jobs and prepares them for taking up new assignments in the future. Training also helps in the development of the employees. The main objective of the study is to measure the effectiveness of the training in the organization and its impact on employee job perf...

  4. Use of multiple sensor technologies for quality control of in situ biogeochemical measurements: A SeaCycler case study

    Science.gov (United States)

    Atamanchuk, Dariia; Koelling, Jannes; Lai, Jeremy; Send, Uwe; Wallace, Douglas

    2017-04-01

    Over the last two decades observing capacity for the global ocean has increased dramatically. Emerging sensor technologies for dissolved gases, nutrients and bio-optical properties in seawater are allowing extension of in situ observations beyond the traditionally measured salinity, temperature and pressure (CTD). However the effort to extend observations using autonomous instruments and platforms carries the risk of losing the level of data quality achievable through conventional water sampling techniques. We will present results from a case study with the SeaCycler profiling winch focusing on quality control of the in-situ measurements. A total of 13 sensors were deployed from May 2016 to early 2017 on SeaCycler's profiling sensor float, including CTD, dissolved oxygen (O2, 3 sensors), carbon dioxide (pCO2, 2 sensors), nutrients, velocity sensors, fluorometer, transmissometer, single channel PAR sensor, and others. We will highlight how multiple measurement technologies (e.g. for O2 and CO2) complement each other and result in a high quality data product. We will also present an initial assessment of the bio-optical data, their implications for seasonal phytoplankton dynamics and comparisons to climatologies and ocean-color data products obtained from the MODIS satellite.

  5. The Use of New Learning Technologies in Higher Education Classroom: A Case Study

    Directory of Open Access Journals (Sweden)

    Micaela Dinis Esteves

    2018-05-01

    Full Text Available We have conducted a study with higher level education students, in lecture classes of three Undergraduate Courses and one Professional Higher Technical Course that involved six different subjects with a total of 324 students. In this research the use of Game-Based Learning platform was analysed in order to encourage the students’ participation, increasing motivation and keeping them motivated and committed during lessons, therefore, increasing their learning skills. Based on these results, we recommend that Kahoot is used in lectures in order to help students develop their performances and abilities and at the same time be more successful and prepared to have an active participation in society.

  6. Investigation and Prioritizing Outsourcing of Information and Communication Technology (ICT Projects (Case Study: ICT Infrastructure Projects

    Directory of Open Access Journals (Sweden)

    Seyed Ehsan Khansarizadeh

    2015-03-01

    Full Text Available Outsourcing IT functions is being developed as a replacement for implementing IT projects or rendering IT services within organizations. Organizations’ past experiences in outsourcing indicate that this process poses variety of risks and problems. This study is aimed to identify and prioritize the risks of outsourcing IT infrastructure projects. Classifying risks of outsourcing along with incorporating thematic experts’ experiences through the Delphi method, reveals various risks associated with the employer and the contractor as the primary sources of risks as well as general risks and chronological risks which occur in the periods before, during and after contracts. A total of 22 main risks were identified and categorized. Afterwards, based on the opinions obtained from thematic experts and using the Analytic Hierarchy Process, different types of risks were prioritized. The results suggest that those risks arising due to failings of structure and content are more important than those of technical and contextual knowledge.

  7. Performance of PWR study in the technology supplier countries: south korea and japan case

    International Nuclear Information System (INIS)

    Sriyana

    2007-01-01

    Electricity is needed as an infrastructure to support the national economic growth. For economic development sustainability, energy alternatives should be provided. Nuclear Power Plant (NPP) become the alternative of electricity generation for optimum energy mix in Indonesia and planned to operate in the 2016. Several studies have already done to prepare the NPP construction. This study focused on NPP performance especially PWR type in Asia, namely Japan and South Korea. Methodology used in this is literature tracing and a small calculation. The energy availability per unit per year is used as a parameter for evaluating the NPP performance. This conclusion are 1) the amount of NPP - PWR type in Japan is 22 units with total operational experiences 526 reactor-years and the average energy availability factor about 70.7% per unit per year. Meanwhile for the same type South Korea has 16 unit with total operational experience 222 reactor-years and average availability factor per unit per year is about 86.9%. 2) the 1000 class of PWR type both South Korea and Japan have 14 units. The operational experiences for thi class is 170 reactor-year for South Korean and 307 reactor-year for Japan. Meanwhile the average availability factor per unit per year is about 87.0% for South Korea and 69.6% for Japan. 3) the average availability factor is closed to capacity factor, so is important for real figure in assuming the techno-economic parameters, because it will influence the result o economic calculation. (author)

  8. Information technology governance domains in hospitals: a case study in Iran.

    Science.gov (United States)

    Shahi, Mehraban; Sadoughi, Farahnaz; Ahmadi, Maryam

    2014-11-30

    IT governance is a set of organizational structures ensuring decision-making rights and responsibilities with regard to the organization's IT assets. This qualitative study was carried out to identify the IT governance domains in teaching hospitals affiliated to Iran University of Medical Sciences. There were 10 heads of IT departments and 10 hospital directors. Semi structured interviews used for data collection. To analyze the data content analysis was applied. All the interviewees (100%) believed that decisions upon hospital software needs could be made in a decentralized fashion by the IT department of the university. Most of the interviewees (90%) believed that there were policies for logistics and maintenance of networks, purchase and maintenance, standards and general policies in the direction of the policies of the ministry of health and medical education. About 80% of the interviewees believed that the current emphasis of the hospital's IT unit and the hospital management for outsourcing of services were in the format of specialized contracts and under supervision of the university Statistic and IT department. A hospital strategic committee is an official organizational group consisting of hospital executives, heads of IT and multiple functional areas and business units in a hospital. In this committee, "the head of hospital" acts as the director of IT activities and ensures that IT strategies are alignment with the hospital business strategies.

  9. Barriers to the diffusion of renewable energy technologies - A case study of the state of Maharashtra, India

    Energy Technology Data Exchange (ETDEWEB)

    Reddy, B.S. [Indira Gandhi Inst. of Development Research, Mumbai (India)

    2001-07-01

    energy policy documents, equipment manufacturers, tariff schedules, etc. In the second part analysis was carried out based on the data collected through stake holder level surveys. For doing this, sample surveys of residential, commercial and industrial firms were conducted through structured questionnaires. Policy makers and wind energy developers were also interviewed to understand their perception on barriers to RETs. The barriers that emerged would help to understand the factors that need to be addressed which in turn play an important role in policy analysis and speedy implementation of these RETs. The major findings of the study are as follows: In the case of solar-water heating (SWH), the adoption levels were very low. As already mentioned, electric water heaters are being used by majority of the consumers in all the sectors. A small percentage of commercial and industrial establishments use SWHs (< 10% of total) while wind energy developers supply a small amount of energy (less than 1% of the total) to the utilities. The awareness level about RETs varies with the type of consumer. In the commercial and industrial sectors, majority of the consumers are aware about the SWH, its costs and benefits. In the case of residential sector, a significant percentage are still unaware about this technology. Renewable energy technologies encounter a variety of barriers, as summarised below: 1) Information and awareness; 2) Financial and Economic; 3) Technological; 4) Institutional; and 5) Market. For the effective penetration of RETs, it is necessary for the consumers, utilities and the government to enlarge their role by active participation in the penetration programmes. The cost of saved demand is much lower than that of augmenting supply in centralised power plants. Hence, programmes for implementing these technologies needs to be integrated into the power planning and management process. It would be very desirable if every State Electricity Board (SEB) formulates a

  10. How different technologies can fit nursing processes to empower staff and increase quality of care. An Italian case study.

    Science.gov (United States)

    Bollini, Giovanna; Lolli, Angela; Zaza, Raffaele; Origgi, Gianni; Bragagia, Silvia; Locatelli, Paolo; Restifo, Nicola

    2009-01-01

    The rapid evolution of healthcare and the need to contain costs, to decrease the time of patients' hospitalization, and to improve the quality of care has led the nursing profession to face new challenges. This paper describes the case study of A.O. Ospedale Niguarda in Milan (Italy), a public healthcare provider where the key role of Nursing is being recognized according to international common practice. Also considering the context of Italian healthcare, attention will be drawn to concrete actions carried out on the organizational side and also for what concerns IT tools supporting nursing activities. This was done aiming with success at rising nurses' knowledge level of the patient, support its activities, increase quality of care, in a precise managerial and methodological framework. We will describe four cases of projects (Intensive Care Unit patient record, First Aid Station care reporting, pressure ulcers management, transfusion traceability) carried out by Niguarda with the support of its partner Fondazione Politecnico di Milano, set up to support bedside nursing activities with the most suitable technology for the purpose.

  11. Development and Evaluation of Senior High School Courses on Emerging Technology: A Case Study of a Course on Virtual Reality

    Science.gov (United States)

    Chen, Chi-Tung

    2012-01-01

    In Taiwan, the National Science Council has implemented the High Scope Program (HSP) since 2006. The purpose of this study was to analyze the development and effectiveness of senior high school HSP courses on emerging technology. This study used a course on virtual reality as an example, to investigate the influence of emerging technology courses…

  12. Technological Innovations in the Food Packaging: a case study of adoption of active packaging in coffee roaster companies

    Directory of Open Access Journals (Sweden)

    Mário Otávio Batalha

    2010-12-01

    Full Text Available Most of technological innovations in agro-food systems are created by “supporting industries”, the group where packaging industries are inserted. This article presents the packaging innovations used in food industries, particularly, the active packaging. This paper deals with an adoption case of a degassing one-way valve, describing this innovation and its impacts in two coffee companies. This study can be classified as a documental, qualitative-descriptive and empirical research, using indirect documentation technique and case study analysis. According to this case, the valve made possible the diversification of the company product line and product quality improvement. There were no complications involving an additional cost to the customers. However, it has been observed that this additional cost from technology adoption makes difficult the diffusion of this valve in other similar products.Grande parcela das inovações tecnológicas dos sistemas agroindustriais é gerada pelas “indústrias de apoio”, grupo no qual as indústrias de embalagens se inserem. Esse artigo discute as inovações em embalagens destinadas à indústria de alimentos, em especial as chamadas embalagens ativas. Discute-se o caso de adoção da válvula unidirecional de alívio de gases, descrevendo a inovação e seus impactos em duas indústria processadoras de café nas empresas. A pesquisa desenvolvida é de ordem documental e qualitativo-descritiva de caráter empírica, usando técnica de análise de documentação indireta e estudo de caso . No caso abordado, a válvula possibilitou a diversificação da linha de produtos e o incremento da sua qualidade, não havendo complicações no que se refere ao repasse do custo adicional para o consumidor desse produto. Contudo, verifica-se que esse custo adicional da adoção da tecnologia dificulta a difusão da válvula em produtos similares.

  13. Environmental Technology Assessment of Introducing Fuel Cell City Buses. A Case Study of Fuel Cell Buses in Goeteborg

    Energy Technology Data Exchange (ETDEWEB)

    Karlstroem, Magnus

    2002-07-01

    Over the last several years, fuel cell systems have improved. These advancements have increased the expectations that fuel cells are a feasible option for several applications such as transportation and stationary use. There are several reasons why fuel cell buses in city centres appear to be the most beneficial market niche to begin introducing the technology in. The goal of the report is to compile information about fuel cell buses relevant for city administrators working with public transport and environmental issues. A literature review of the fuel cells in buses is included. This study also consists of an environmental assessment of using fuel cell buses with hydrogen produced in various ways for buses on bus route 60 in Goeteborg by 2006. The fuel cell buses are compared with other bus and fuel alternatives. There are two goals of the case study: 1. The first goal is to describe the technical system, the methodology, and the problem for the intended audience. In the future, this study could help frame future investment decisions. 2. The second goal is to present environmental performance results---emission, health, monetary---relative the alternative bus technologies. The model calculations showed that the social benefits were approximately SEK 910,000 each year if all buses were fuel cell buses compared with developed diesel buses. If the fuel cell buses were compared to natural gas buses, then the benefits were SEK 860,000 each year. The benefits were SEK 1.39/bus/km compared with diesel buses or SEK 1.30/bus/km compared with natural gas buses.

  14. case study

    African Journals Online (AJOL)

    Elton

    particularly in patients who commence ART with low CD4 counts and established opportunistic infections. IRIS results from a pathological inflammatory response to pre-existing infective, host or other antigens, alive or dead, causing clinical deterioration in HIV-infected patients after initiating ART.1 A case definition for IRIS ...

  15. CASE STUDY

    African Journals Online (AJOL)

    2010-09-01

    Sep 1, 2010 ... of the two diseases surgery can be successful, recovery can be similar to that .... lymphocytes predominated in 68% of cases, and that there was an .... using ferritin is the fact that it acts as an acute-phase reactant and will be ...

  16. DESIGNING A COMPETITIVE ADVANTAGE MODEL WITH TECHNOLOGY ORIENTED APPROACH USING FAHP TECHNIQUE: A CASE STUDY IN COIL INDUSTRY

    Directory of Open Access Journals (Sweden)

    ABDOLHAMID S. GHADIKOLAEI

    2013-04-01

    Full Text Available One of the distinctive attributes of today’s successful companies is having at least one competitive advantage in one known area. Technological competency is an important advantage which helps improve the firm’s competitiveness. In fact, suitable use of new technologies can dramatically influence the innovation speed, decrease the time of product development cycle and also increase the rate of new product introduction. Firm-specific technological competencies help explain why a firm is different, how it changes over time, and whether it is capable of remaining competitive. In this study, technological competency factors (technology management, process technology, product technology are prioritized according to the competitive advantage levels(customer satisfaction, brand reputation, new product introduction, market share and competitive priorities (cost, price, quality, flexibility, time using fuzzy Analytic hierarchy process (FAHP with the aim of maximizing the nonfinancial performance at coil manufacture industry. The results indicate that within Iran coil industry, process technology is of greater importance than technology management and product technology.

  17. The integration of corporate social responsibility into the strategy of technology-intensive firms: a case study

    Directory of Open Access Journals (Sweden)

    Miha Škerlavaj

    2010-06-01

    Full Text Available This paper presents a new perspective which calls for an integration of ethics and corporate social responsibility (CSR into the company strategy as a source of competitive advantages. The research question we pose is how a company can successfully carry out this integration of CSR into its strategic management, for which a model that includes three stages – introduction, implementation and generalization of CSR – is presented. Based on an exploratory case study within a Spanish technology-intensive firm (Indra, we show the way this company has developed and implemented an explicit plan for the integration of ethical values and CSR initiatives into its corporate and business strategies. Although this company has established its own methodology in order to develop and implement CSR plans, it fits in essence to our three-stage model of CSR integration. In general, our analyses show a beneficial impact of the development and implementation of CSR plan for this technology-intensive company. In particular, it seems that the CSR plan enables companies to improve its’ internal and external (competitive context through a better exploration and exploitation of knowledge, its stable relationships with stakeholders and the development and improvement of intangible resources such as reputation or social capital. It is also shown that there are important factors to consider in order this process can successfully carried out, such as organizational culture, human resource practices or knowledge management systems. Future research will need to engage in largerscale confirmatory as well as longitudinal studies of the impact of CSR implementation for company performance.

  18. The technological innovation case of the KAERI

    International Nuclear Information System (INIS)

    Choi, J. I.; Jang, S. K.; Hong, K. P.; Lee, E. S.

    2008-01-01

    The research aims to investigate what key success factors (KSFs) of technological innovation in KAERI are, and to suggest how these findings are utilized for KAERI. In order to achieve these goals we have employed case study based on in-depth interview and literature review. And there are two fields of research in KAERI: one is nuclear energy-related research, the other is non energy-related research. The former is 'nuclear fuel cladding tube' which is an industrial product and being regarded as catch-up (or imitative) mode of technological innovation: the latter is 'HemoHIM', herbal composition of health functional food, which is consumer goods and regarded as creative (or innovative) mode of technological innovation. We found some KSFs in these two research and development cases in KAERI: firstly, to train researcher to be a 'product champion' who can fill in the gap of 'death valley' between pure research and commercialization: secondly, to build researchers' competency in order to catch up advanced countries' technological competencies. Thirdly, to amend institutional rules and regulations for commercializing processes of R and D outcomes, notably 'R and D joint venture by Government Research Institute (GRI) and private sector' fourthly, to enhance the capabilities of external management for researchers' technological innovation competency. And finally, we recommend using successful R and D cases as educational materials when training young researchers for sharing old generations' experiences and tacit knowledge

  19. Critical factors for bioenergy technology implementation. Five case studies of bioenergy markets in the United States, Sweden and Austria

    Energy Technology Data Exchange (ETDEWEB)

    Roos, Anders [Swedish Univ. of Agricultural Sciences, Uppsala (Sweden). Dept. of Forest-Industry-Market Studies

    1998-07-01

    This report analyses the driving forces of, and barriers to, biomass energy technology implementation with the objective of defining the most important factors behind the growth of bioenergy markets and suggesting strategies for policy makers and investors. The approach is to describe the important factors for the development of real bioenergy markets at two levels: (1) Institutional, primarily policy, and (2) market structure. Concepts from economic theory, primarily transaction cost theory and industrial organisation, are used in a qualitative way. The report is based on literature studies and field studies of bioenergy markets in three countries: the United States of America, Austria, and Sweden. It is divided into five sections. After the introduction in section one, literature with relevance for this study is reviewed in section two. In section three the energy policy and energy sectors of each country are described. The descriptions include an overview of the biomass energy sectors. Five cases of developed bioenergy markets in the three countries are presented in section four. The cases are residential heating with wood pellets in New Hampshire, United States, biomass power production in Maine, residential heating with pellets in Sweden, biomass district heating in Sweden, and biomass district heating in Austria. All markets are described in terms of the historical development, technical issues, economics, market structure and local policy influences. In the discussion in section five a number of key factors behind the success or failure of bioenergy are presented. Six factors are most important: (1) Complementaries between the bioenergy operations and another activity (for instance when the bioenergy production uses biomass waste products from another industry); (2) economics of scale within the bioenergy business through larger production series, standards, specialization etc.; (3) a competitive bioenergy market (Many sellers and buyers operate in the

  20. Critical factors for bioenergy technology implementation. Five case studies of bioenergy markets in the United States, Sweden and Austria

    International Nuclear Information System (INIS)

    Roos, Anders

    1998-01-01

    This report analyses the driving forces of, and barriers to, biomass energy technology implementation with the objective of defining the most important factors behind the growth of bioenergy markets and suggesting strategies for policy makers and investors. The approach is to describe the important factors for the development of real bioenergy markets at two levels: (1) Institutional, primarily policy, and (2) market structure. Concepts from economic theory, primarily transaction cost theory and industrial organisation, are used in a qualitative way. The report is based on literature studies and field studies of bioenergy markets in three countries: the United States of America, Austria, and Sweden. It is divided into five sections. After the introduction in section one, literature with relevance for this study is reviewed in section two. In section three the energy policy and energy sectors of each country are described. The descriptions include an overview of the biomass energy sectors. Five cases of developed bioenergy markets in the three countries are presented in section four. The cases are residential heating with wood pellets in New Hampshire, United States, biomass power production in Maine, residential heating with pellets in Sweden, biomass district heating in Sweden, and biomass district heating in Austria. All markets are described in terms of the historical development, technical issues, economics, market structure and local policy influences. In the discussion in section five a number of key factors behind the success or failure of bioenergy are presented. Six factors are most important: (1) Complementaries between the bioenergy operations and another activity (for instance when the bioenergy production uses biomass waste products from another industry); (2) economics of scale within the bioenergy business through larger production series, standards, specialization etc.; (3) a competitive bioenergy market (Many sellers and buyers operate in the

  1. Critical factors for bioenergy technology implementation. Five case studies of bioenergy markets in the United States, Sweden and Austria

    Energy Technology Data Exchange (ETDEWEB)

    Roos, Anders [Swedish Univ. of Agricultural Sciences, Uppsala (Sweden). Dept. of Forest-Industry-Market Studies

    1998-07-01

    This report analyses the driving forces of, and barriers to, biomass energy technology implementation with the objective of defining the most important factors behind the growth of bioenergy markets and suggesting strategies for policy makers and investors. The approach is to describe the important factors for the development of real bioenergy markets at two levels: (1) Institutional, primarily policy, and (2) market structure. Concepts from economic theory, primarily transaction cost theory and industrial organisation, are used in a qualitative way. The report is based on literature studies and field studies of bioenergy markets in three countries: the United States of America, Austria, and Sweden. It is divided into five sections. After the introduction in section one, literature with relevance for this study is reviewed in section two. In section three the energy policy and energy sectors of each country are described. The descriptions include an overview of the biomass energy sectors. Five cases of developed bioenergy markets in the three countries are presented in section four. The cases are residential heating with wood pellets in New Hampshire, United States, biomass power production in Maine, residential heating with pellets in Sweden, biomass district heating in Sweden, and biomass district heating in Austria. All markets are described in terms of the historical development, technical issues, economics, market structure and local policy influences. In the discussion in section five a number of key factors behind the success or failure of bioenergy are presented. Six factors are most important: (1) Complementaries between the bioenergy operations and another activity (for instance when the bioenergy production uses biomass waste products from another industry); (2) economics of scale within the bioenergy business through larger production series, standards, specialization etc.; (3) a competitive bioenergy market (Many sellers and buyers operate in the

  2. Explorative economic analysis of a novel biogas upgrading technology using carbon mineralization. A case study for Spain

    NARCIS (Netherlands)

    Starr, Katherine; Ramirez, Andrea; Meerman, Hans; Villalba, Gara; Gabarrell, Xavier

    2015-01-01

    This paper studies the potential application of a novel biogas upgrading technology called alkaline with regeneration (AwR). This technology uses an alkaline solution, along with carbon mineralization, to remove and store CO2 from biogas in order to create biomethane, a substitute of natural gas.

  3. Trends in EFL Technology and Educational Coding: A Case Study of an Evaluation Application Developed on LiveCode

    Science.gov (United States)

    Uehara, Suwako; Noriega, Edgar Josafat Martinez

    2016-01-01

    The availability of user-friendly coding software is increasing, yet teachers might hesitate to use this technology to develop for educational needs. This paper discusses studies related to technology for educational uses and introduces an evaluation application being developed. Through questionnaires by student users and open-ended discussion by…

  4. Relationships between In-Service Teacher Achievement Motivation and Use of Educational Technology: Case Study with Latvian and Estonian Teachers

    Science.gov (United States)

    Karaseva, Agnese; Pruulmann-Vengerfeldt, Pille; Siibak, Andra

    2018-01-01

    This study explored the relationship of in-service teacher achievement goal orientation and practices of educational technology use. Semi-structured individual interviews with secondary school teachers in Latvia (N = 16) and Estonia (N = 10) revealed that the use of information and communication technology (ICT) in pedagogical work and the ways in…

  5. The Impact of Learning about Technology via Action Research as a Professional Development Activity on Higher Education: A Case Study

    Science.gov (United States)

    Premdas, Leisa

    2017-01-01

    The purpose of this mixed method study was to determine the perceived impact of learning about technology via action research as a professional development activity on faculty and students in higher education. Nine faculty members--also Teaching and Technology Fellows representing various disciplines at St. John's University--were selected based…

  6. Investigating the Impact of Computer Technology on the Teaching and Learning of Graphic Arts in Nigeria Osun State College of Education Ila-Orangun as a Case Study

    Science.gov (United States)

    Abass, Bada Tayo

    2012-01-01

    This paper focused on the use of computer technology in the teaching and learning of graphic arts in Nigeria colleges of Education. Osun State Colleges of Education Ila-Orangun was used as a case study. The population of the study consisted of all Graphic students in Nigeria colleges of Education. 50 subjects were used for the study while…

  7. Preparing pre-service teachers to integrate technology into inquiry-based science education: Three case studies in The Netherlands

    International Nuclear Information System (INIS)

    Tran, Trinh-Ba; Ed van den Berg, Ed; Beishuizen, Jos; Ellermeijer, Ton

    2015-01-01

    Integration of technology (e.g. measuring with sensors, video measurement, and modeling) into secondary-school science teaching is a need globally recognized. A central issue of incorporating these technologies in teaching is how to turn manipulations of equipment and software into manipulations of ideas. Therefore, preparation for pre-service teachers to apply ICT tools should be combined with the issues of minds-on inquiring and meaning-making. From this perspective, we developed a course within the post-graduate teacher-education program in the Netherlands. During the course, pre-service teachers learnt not only to master ICT skills but also to design, teach, and evaluate an inquiry-based lesson in which the ICT tool was integrated. Besides three life sessions, teachers’ learning scenario also consisted of individual tasks which teachers could carry out mostly in the school or at home with support materials and online assistance. We taught three iterations of the course within a design-research framework in 2013, 2014 and collected data on the teacher learning processes and outcomes. The analyses of these data from observation, interviews, questionnaires, and documents were to evaluate implementation of the course, then suggest for revisions of the course set-up, which was executed and then assessed again in a subsequent case study. Main outcomes of the three case studies can be summarized as follows: within a limited time (3 life sessions spread over 2–3 months), the heterogeneous groups of pre-service teachers achieved a reasonable level of competence regarding the use of ICT tools in inquiry-based lessons. The blended set-up with support materials, especially the Coach activities and the lesson-plan form for an ICT-integrated inquiry-based lesson, contributed to this result under the condition that the course participants really spent considerable time outside the life sessions. There was a need for more time for hands-on, in-group activities in life

  8. Preparing pre-service teachers to integrate technology into inquiry-based science education: Three case studies in The Netherlands

    Science.gov (United States)

    Tran, Trinh-Ba; van den Berg, Ed; Ellermeijer, Ton; Beishuizen, Jos

    2016-05-01

    Integration of technology ( e.g. measuring with sensors, video measurement, and modeling) into secondary-school science teaching is a need globally recognized. A central issue of incorporating these technologies in teaching is how to turn manipulations of equipment and software into manipulations of ideas. Therefore, preparation for pre-service teachers to apply ICT tools should be combined with the issues of minds-on inquiring and meaning-making. From this perspective, we developed a course within the post-graduate teacher-education program in the Netherlands. During the course, pre-service teachers learnt not only to master ICT skills but also to design, teach, and evaluate an inquiry-based lesson in which the ICT tool was integrated. Besides three life sessions, teachers' learning scenario also consisted of individual tasks which teachers could carry out mostly in the school or at home with support materials and online assistance. We taught three iterations of the course within a design-research framework in 2013, 2014 and collected data on the teacher learning processes and outcomes. The analyses of these data from observation, interviews, questionnaires, and documents were to evaluate implementation of the course, then suggest for revisions of the course set-up, which was executed and then assessed again in a subsequent case study. Main outcomes of the three case studies can be summarized as follows: within a limited time (3 life sessions spread over 2-3 months), the heterogeneous groups of pre-service teachers achieved a reasonable level of competence regarding the use of ICT tools in inquiry-based lessons. The blended set-up with support materials, especially the Coach activities and the lesson-plan form for an ICT-integrated inquiry-based lesson, contributed to this result under the condition that the course participants really spent considerable time outside the life sessions. There was a need for more time for hands-on, in-group activities in life

  9. The Application Study in Solar Energy Technology for Highway Service Area: A Case Study of West Lushan Highway Low-Carbon Service Area in China

    Directory of Open Access Journals (Sweden)

    Xiaochun Qin

    2015-01-01

    Full Text Available A lot of research works have been made concerning highway service area or solar technology and acquired great achievements. However, unfortunately, few works have been made combining the two topics together of highway service areas and solar energy saving to make a systemic research on solar technology application for highway service area. In this paper, taking West Lushan highway low-carbon service area in Jiangxi Province of China as the case study, the advantages, technical principles, and application methods of solar energy technology for highway service area including solar photoelectric technology and solar water heating technology were discussed based on the analysis of characteristics of highway low-carbon service area; the system types, operation mode, and installing tilt angle of the two kinds of solar systems suitable for highway service areas were confirmed. It was proved that the reduction of the cost by electricity savings of solar system was huge. Taking the investment of the solar systems into account, the payback period of solar photoelectric systems and solar water heating systems was calculated. The economic effect of the solar systems in West Lushan highway service area during the effective operation periods was also calculated and proved very considerable.

  10. A Case Study on the Impacts of Connected Vehicle Technology on No-Notice Evacuation Clearance Time

    Directory of Open Access Journals (Sweden)

    Karzan Bahaaldin

    2017-01-01

    Full Text Available No-notice evacuations of metropolitan areas can place significant demands on transportation infrastructure. Connected vehicle (CV technology, with real-time vehicle to vehicle and vehicle to infrastructure communications, can help emergency managers to develop efficient and cost-effective traffic management plans for such events. The objectives of this research were to evaluate the impacts of CVs on no-notice evacuations using a case study of a downtown metropolitan area. The microsimulation software VISSIM was used to model the roadway network and the evacuation traffic. The model was built, calibrated, and validated for studying the performance of traffic during the evacuation. The researchers evaluated system performance with different CV penetration rates (from 0 to 30 percent CVs and measured average speed, average delays, and total delays. The findings suggest significant reductions in total delays when CVs reached a penetration rate of 30 percent, albeit increases in delays during the beginning of the evacuation. Additionally, the benefits could be greater for evacuations that last longer and with higher proportions of CVs in the vehicle stream.

  11. STRATEGIC ENVIRONMENT ASSESSMENT ON LAND-USE PLANNING-A Case Study of Changchun Economic and Technological Zone

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The study centers on the necessity, the workflow and the synthetically integrated methods (Principal Component Analysis(PCA), AndyticalHierarchyProcess(AHP) andFuzzy ComprerhensiveEvaluation(FCE)) of strategic environment assessment (SEA) on land-use planning. The whole article includes three main parts: firstly, some attributedatabase, graphic-base and the spatial transform matrix, which reflect the change of regional land-use pattern, can be obtained by GIS technique; secondly, adopting fitting method of trend-surface analysis will convert environment monitoringdata from scattered spots to regular control spots, based on which we can perform regional environment impact assessment; finally, Changchun Economic and Technological Developmen Zone is chosen as a case study on land-use planning.Through those efforts the results may be obtained as follows: 1 ) according to transform matrix, the possibility of transformation from one land-use to another can be obtained after the planning is carried out; 2) environment quality would changeas a result of the change of land-nsc pattern; 3) the SEA on land-use plan is an effective tool to make land-use patternmore reasonable.

  12. Case Study: Testing with Case Studies

    Science.gov (United States)

    Herreid, Clyde Freeman

    2015-01-01

    This column provides original articles on innovations in case study teaching, assessment of the method, as well as case studies with teaching notes. This month's issue discusses using case studies to test for knowledge or lessons learned.

  13. Mapping Research Activities and Technologies for Sustainability and Environmental Studies--A Case Study at University Level

    Science.gov (United States)

    Hara, Keishiro; Uwasu, Michinori; Kurimoto, Shuji; Yamanaka, Shinsuke; Umeda, Yasushi; Shimoda, Yoshiyuki

    2013-01-01

    Systemic understanding of potential research activities and available technology seeds at university level is an essential condition to promote interdisciplinary and vision-driven collaboration in an attempt to cope with complex sustainability and environmental problems. Nonetheless, any such practices have been hardly conducted at universities…

  14. Teaching science to 8th graders by engaging them in a design and technology activity: A case study

    Science.gov (United States)

    Sidawi, Mai M.

    This study described how students can apply science concepts to a Design and Technology task. It also examined whether the students could transfer their scientific knowledge to their design of technology. The study was conducted at an urban school in Philadelphia where a sample of 36 eighth grade students were taught a science unit, Energy, Machines, and Motion, and engaged in a technology design task that was chosen based on the scientific content of the unit. Two approaches of relating teaching science to technological design were observed and described. Through the first approach, the students were given technology lessons in addition to their science lessons. This was to provide them with the technological knowledge that they needed in designing technology such as learning about the design process, selection of appropriate materials, and selection of appropriate tools and how to use them. Also, the students were taught the social skills that will enable them to develop an effective collaborative relationship with their peers such as conflict-management and brainstorming. Through the second approach, the students were taught the science unit and then at the end of the unit the students were given the design task as an assessment of their scientific knowledge. The students' experience of designing technology for each approach was described. The study was conducted using multiple tools and instruments such as observation, videotaping, interviews, and testing. The students were also given the survey PATT-USA to measure their attitude toward technology. The study showed that the students' learning of science was impacted by their weak prerequisite knowledge in science, their poor verbal and written communication skills and their style as dependent learners. Also, the study showed the great impact of the school and classroom cultures on the participation of the students in a Design and Technology activity. The students in this study showed great resistant to

  15. Building Adaptive Capacity of Pathways in Technology Early College High School Stakeholders: A Multiple-Case Study on the Influence of Performance, Leadership, and Organizational Learning

    Science.gov (United States)

    Michaud-Wells, Amy

    2016-01-01

    The purpose of this qualitative study was to explore the perceptions and beliefs of Pathways in Technology Early College High School (P-TECH) leaders and stakeholders regarding the personal and professional experiences that contributed to the development of adaptive capacity. This embedded multiple-case study was anchored by the interrelated…

  16. An empirical study on different factors influencing information technology adoption for auditing purposes: A case study of a banking organization

    Directory of Open Access Journals (Sweden)

    Mehdi Taghavi

    2013-04-01

    Full Text Available In this survey, we have investigated whether an easy and comprehensive information technology (IT infrastructure could contribute on auditing system in Iranian business society. The survey designs and distributes a questionnaire based on technology adoption method (TAM among employees of bank Melli Iran who participated in our survey in Likert scale and using t-student and Kruskal-Wallis test examined different hypotheses. The results of our survey have indicated that there was a relationship between a good perception in usefulness of IT implementation and accepting recent advances of IT and auditors with good perception on IT are able to take advantage of recent advances of IT in their auditing skills. In addition, our survey has concluded that ease of IT implementation could create motivation among auditors to automate their traditional skills. While educational background played an important role on our survey, age and job experience did not have any impact on our survey.

  17. How to measure gain-sharing in an outsourcing relationship: a case study in information technology environment

    Directory of Open Access Journals (Sweden)

    Surendra Agrawal

    2005-08-01

    Full Text Available This study aims to approach the issue of gain-sharing measurement in an information technology outsourcing relationship as a component of remuneration policies for contracted services among companies. The methodology encompass three steps: (i bibliographical revision on outsourcing relationship in information technology environment and pricing in outsourcing decisions; (ii a case study in which the problem of gain-sharing measurement emerges in the relationship (providing information technology services between two large-scale international companies that operate in Brazilian credit card market; (iii discussion of the findings of the case study on basis of the revised literature. The contributions of the paper are: (i to identify the main issues related to outsourcing decisions and pricing in outsourcing relationship; (ii to present a description of the characteristics and behavior of costs in information technology environment; and (iii to provide an analysis and discussion about the method adopted by the companies for gain-sharing measurement. The bibliographical research showed a lack of literature regarding to the specific subject of gain-sharing measurement. The findings of the empirical study indicated that information technology companies are highly structured with fixed costs and that gain-sharing method adopted by studied companies corresponds to costs savings measured by cost-accounting concepts of price and efficiency cost variances according to budget parameters. In addiction, it was observed that the method adopted contributes to get more transparency and capability to analyze the business relationship by both receiver and provider companies.Este estudo tem o objetivo de analisar o problema da mensuração do gain-sharing na terceirização de serviços de tecnologia da informação como um componente da política de remuneração dos serviços contratados entre duas organizações. A metodologia adotada compõe-se de três passos

  18. Using the Quadruple Aim Framework to Measure Impact of Heath Technology Implementation: A Case Study of eConsult.

    Science.gov (United States)

    Liddy, Clare; Keely, Erin

    2018-01-01

    Health technology solutions are too often implemented without a true understanding of the system-level problem they seek to address, resulting in excessive costs, poor adoption, ineffectiveness, and ultimately failure. Before implementing or adopting health care innovations, stakeholders should complete a thorough assessment to ensure effectiveness and value. In this article, we describe how to evaluate the impact of a health technology innovation through the 4 dimensions of care outlined by the Quadruple Aim Framework, using our experience with the Champlain Building Access to Specialists through eConsultation (BASE) eConsult service as a case example. A descriptive overview of data was collected between April 1, 2011, and August 31, 2017, using 4 dimensions of care outlined by the Quadruple Aim Framework: patient experience, provider experience, costs, and population health. Findings were drawn from use data, primary care provider closeout surveys, surveys/interviews with patients and provider, and costing data. Overall, patients have received access to specialist advice within days and find the advice useful in 86% of cases. Provider experience is very positive, with satisfaction ratings of high/very high value in 94% of cases. The service cost a weighted average of $47.35/case, compared with $133.60/case for traditional referrals. In total, 1,299 primary care providers have enrolled in the service, completing 28,838 cases since 2011. Monthly case volumes have grown from an average of 13 cases/month in 2011 to 969 cases/month in 2016. The eConsult service has been widely adopted in our region and is currently expanding to new jurisdictions across Canada. However, although we successfully demonstrated eConsult's impact on patient experience, provider satisfaction, and reducing costs, we met several challenges in evaluating its impact on population health. More work is needed to evaluate eConsult's impact on key population health metrics (eg, mortality, morbidity

  19. Adoption of new technology in sports medicine: case studies of the Gore-Tex prosthetic ligament and of thermal capsulorrhaphy.

    Science.gov (United States)

    Virk, Sohrab S; Kocher, Mininder S

    2011-01-01

    Evaluation of new technology in sports medicine is supposed to promote improvements in the care of patients. It is also supposed to prohibit technology that can harm patients. This evaluation process is not perfect and at times can promote technology that not only does not help patients but may harm them. Two examples of new sports medicine technology that were widely adopted but eventually abandoned are thermal capsulorrhaphy for treatment of shoulder instability and the Gore-Tex prosthetic ligament (W. L. Gore & Associates, Flagstaff, AZ) for patients with anterior cruciate ligament deficiency. On analysis of the quick adoption of these 2 failed procedures, certain recommendations are apparent for improvement of the evaluation process. There must be a sound rationale behind any new technology, basic science research into the theory of the medical technology, and demonstrated improvements in animal models and clinical studies that are prospective cohort studies or randomized controlled trials, and finally, there must be careful follow-up and postmarket surveillance. Copyright © 2011 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

  20. Strategies to overcome barriers for cleaner generation technologies in small developing power systems: Sri Lanka case study

    International Nuclear Information System (INIS)

    Wijayatunga, Priyantha D.C.; Siriwardena, Kanchana; Fernando, W.J.L.S.; Shrestha, Ram M.; Attalage, Rahula A.

    2006-01-01

    The penetration of cleaner and energy efficient technologies in small power systems such as the one in Sri Lanka has encountered many problems. This has caused major concerns among the policy makers, mainly in the context of the growing need to reduce harmful emissions in the electricity supply industry from the point of view of both local environmental pollution as well as the global warming concerns. This paper presents the outcome of a study involved in identifying and ranking the barriers to the promotion of cleaner and energy efficient technologies and strategies to overcome these barriers in Sri Lanka. Barriers for renewable energy based systems such as wind and wood fuel fired plants (dendro thermal power) and cleaner technologies such as liquefied natural gas (LNG) fired combined cycle and IGCC (coal) were identified based on a survey. A direct assessment multi-criteria decision making method called Analytic Hierarchy Process (AHP) was used to rank the barriers. The most effective strategies are proposed to address the three major barriers for each of these technologies based on extensive discussions with all the stakeholders in the electricity industry. It was found that lack of financing instruments, high initial cost and lack of assurance of resource supply or availability are the main barriers for renewable technologies. As for cleaner fuel and technology options associated with conventional generation systems, the lack of a clear government policy, uncertainty of fuel supplies and their prices and the reliability of the technologies themselves are the major barriers. Strategies are identified to overcome the above barriers. Establishment of a proper feed in tariff, geographical diversification of installations and capacity building in commercial banks are suggested for wind power. Investment incentives, streamlining of wood production and research on site identification are proposed for wood fuel fired plants. Also the study suggests delayed

  1. Smart charging of electric vehicles with photovoltaic power and vehicle-to-grid technology in a microgrid; a case study

    NARCIS (Netherlands)

    van der Kam, M.J.; van Sark, Wilfried

    2015-01-01

    We present a model developed to study the increase of self-consumption of photovoltaic (PV) power by smart charging of electric vehicles (EVs) and vehicle-to-grid (V2G) technology. Whereas previous studies mostly use large EV fleets in their models, our focus is on a smaller scale. We apply the

  2. Survey of the waste-fueled power generation introducing technology. Case study 1 (fiscal 1996); Haikibutsu hatsuden donyu gijutsu chosa nado. Case study no jisshi 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    A case study on A city was conducted aiming at making a detailed manual for introducing the waste-fueled power generation. The study was made in terms of a large-capacity waste-fueled power plant, estimation of the waste amount considering wide-area processing, size of facilities, comparison of four types of combustion furnace, steam condition/seawater cooling/power generating efficiency, etc. As a result, the following were proposed: As to the size of facilities, a capacity as large as possible is recommended in the light of the scale merit of costs of the waste-fueled power plant and final disposal site and the environmental preservation. Concerning the high efficient power generation, recommended are 450degC and 60-80 ata which are steam conditions for coping with high temperature corrosion. In respect to seawater cooling, the adoption is recommended making good use of locational conditions since the output energy increases by approximately 16%. Any furnace types including the fluidized bed furnace are equal. The amount of dioxin becomes below 0.1ng/Nm{sup 3} because of the control of furnace combustion temperature, residence time, catalytic desulfurization facilities, blowing of activated coal into the flue, etc. 172 figs., 78 tabs.

  3. Applying the food technology neophobia scale in a developing country context. A case-study on processed matooke (cooking banana) flour in Central Uganda.

    Science.gov (United States)

    De Steur, Hans; Odongo, Walter; Gellynck, Xavier

    2016-01-01

    The success of new food technologies largely depends on consumers' behavioral responses to the innovation. In Eastern Africa, and Uganda in particular, a technology to process matooke into flour has been introduced with limited success. We measure and apply the Food technology Neophobia Scale (FTNS) to this specific case. This technique has been increasingly used in consumer research to determine consumers' fear for foods produced by novel technologies. Although it has been successful in developed countries, the low number and limited scope of past studies underlines the need for testing its applicability in a developing country context. Data was collected from 209 matooke consumers from Central Uganda. In general, respondents are relatively neophobic towards the new technology, with an average FTNS score of 58.7%, which hampers the success of processed matooke flour. Besides socio-demographic indicators, 'risk perception', 'healthiness' and the 'necessity of technologies' were key factors that influenced consumer's preference of processed matooke flour. Benchmarking the findings against previous FTNS surveys allows to evaluate factor solutions, compare standardized FTNS scores and further lends support for the multidimensionality of the FTNS. Being the first application in a developing country context, this study provides a case for examining food technology neophobia for processed staple crops in various regions and cultures. Nevertheless, research is needed to replicate this method and evaluate the external validity of our findings. Copyright © 2015 Elsevier Ltd. All rights reserved.

  4. A Case Study for Evaluating the Diffusion of Computing Technology in Teaching Undergraduates by a Faculty in a Journalism and Mass Communication Program.

    Science.gov (United States)

    Terry, Janet L.; Geske, Joel

    A case study investigated how journalism and mass communication faculty members diffused and used computing technology in teaching. Subjects, 21 tenured and tenure-track faculty members in a mid-sized journalism and mass communication department, completed an indepth questionnaire designed to measure the general attitude of the faculty towards…

  5. Toward Understanding the Role of Web 2.0 Technology in Self-Directed Learning and Job Performance in a Single Organizational Setting: A Qualitative Case Study

    Science.gov (United States)

    Caruso, Shirley J.

    2016-01-01

    This single instrumental qualitative case study explores and thickly describes job performance outcomes based upon the manner in which self-directed learning activities of a purposefully selected sample of 3 construction managers are conducted, mediated by the use of Web 2.0 technology. The data collected revealed that construction managers are…

  6. The technological innovation case of the KAERI

    Energy Technology Data Exchange (ETDEWEB)

    Choi, J. I. [Habat Univ., Daejeon (Korea, Republic of); Jang, S. K. [Sungkonghoe Univ., Seoul (Korea, Republic of); Hong, K. P. [Baekseok Univ., Chunan (Korea, Republic of); Lee, E. S. [National Fusion Research Institue, Daejeon (Korea, Republic of)

    2008-01-15

    The research aims to investigate what key success factors (KSFs) of technological innovation in KAERI are, and to suggest how these findings are utilized for KAERI. In order to achieve these goals we have employed case study based on in-depth interview and literature review. And there are two fields of research in KAERI: one is nuclear energy-related research, the other is non energy-related research. The former is 'nuclear fuel cladding tube' which is an industrial product and being regarded as catch-up (or imitative) mode of technological innovation: the latter is 'HemoHIM', herbal composition of health functional food, which is consumer goods and regarded as creative (or innovative) mode of technological innovation. We found some KSFs in these two research and development cases in KAERI: firstly, to train researcher to be a 'product champion' who can fill in the gap of 'death valley' between pure research and commercialization: secondly, to build researchers' competency in order to catch up advanced countries' technological competencies. Thirdly, to amend institutional rules and regulations for commercializing processes of R and D outcomes, notably 'R and D joint venture by Government Research Institute (GRI) and private sector' fourthly, to enhance the capabilities of external management for researchers' technological innovation competency. And finally, we recommend using successful R and D cases as educational materials when training young researchers for sharing old generations' experiences and tacit knowledge.

  7. Simulating future wheat yield under climate change, carbon dioxide enrichment and technology improvement in Iran. Case study: Azarbaijan region

    Energy Technology Data Exchange (ETDEWEB)

    Mansouri, H.; Raei, Y.; Zaeim, A.N.

    2015-07-01

    Climate change and technology development can affect crop productivity in future conditions. Precise estimation of crops yield change as affected by climate and technology in the future is an effective approach for management strategies. The aim of this study was to estimate the impacts of climate change, technology improvement, CO2 enrichment, and overall impacts on wheat yield under future conditions. Wheat yield was projected for three future time periods (2020, 2050 and 2080) compared to baseline year (2011) under two scenarios of IPCC Special Report on Emission Scenarios (SRES) including SRES-A2 as regional economic scenario and SRES-B1 as global environmental scenario in Azarbaijan region (NW of Iran). A linear regression model, describing the relationship between wheat yield and historical year, was developed to investigate technology development effect. The decision support system for agro-technology transfer (DSSAT4.5) was used to evaluate the influence of climate change on wheat yield. The most positive effects were found for wheat yield as affected by technology in all studied regions. Under future climate change, the SRES projected a decrease in yield, especially in West Azarbaijan region. When the effects of elevated CO2 were considered, all regions resulted to increase in wheat yield. Considering all components effect in comparison with baseline (2011), yield increase would range from 5% to 38% across all times, scenarios and regions. According to our findings, it seems that we may expect a higher yield of wheat in NW Iran in the future if technology development continues as well as past years. (Author)

  8. International energy technology collaboration and climate change mitigation. Case study 2. Cooperation in Agriculture. R and D on High-Yielding Crop Varieties

    Energy Technology Data Exchange (ETDEWEB)

    Gagnon-Lebrun, F. [Global and Structural Policies Division, Organisation for Economic Co-operation and Development OECD, Paris (France)

    2004-07-01

    international collaboration by describing the globalisation of the economy and current efforts of technology collaboration and transfer. Finally, it considers various ways to strengthen international energy technology collaboration. This paper is one of six case-studies designed in an effort to provide practical insights on the role international technology collaboration could play to achieve the objectives of the UNFCCC. They will all consider the past achievements of international technology collaboration, and the role it could play in helping to develop and disseminate new technologies in the future: what worked, what did not work and why, and what lessons might be drawn from past experiences. Most case studies consider energy technologies that could help mitigate greenhouse gas emissions. A few others consider areas not directly related to greenhouse gas emissions but where international technology collaboration has proven particularly successful in the past. This case study's aim is to review experience in international collaboration in the field of agriculture research and development (R and D) in order to identify lessons that may be relevant for climate-friendly technology collaboration. To this end, it traces the role of international collaboration in researching, developing and diffusing seeds of high-yielding varieties (HYV) to the world's farmers. This is done by looking mainly at the Consultative Group on International Agricultural Research (CGIAR). The main question this paper addresses is: What are the lessons learned from international collaboration in the field of agriculture that could inform collaboration for climate-friendly technology?.

  9. A Conceptual Model of Technology and E-services Acceptance among Universities\\\\\\' Students (Case Study: Ferdowsi University of Mashhad

    Directory of Open Access Journals (Sweden)

    Shamsodin Nazemi

    2012-12-01

    Full Text Available : In spite of increasing interests and trends among Iranian organizations to incorporate information and communication technology (ICT into service provision to their customers, there is still considerable gap between existing and expected diffusion. The aim of this study was to identify and evaluate main determinants of technology adoption and use on the basis of modified TAM model. The developed model was validated through survey research and data collected from a randomly selected sample of 263 students at Ferdowsi University of Mashhad. Data analysis was conducted using appropriate statistical techniques including regression, and Chaves analysis. The findings of research confirmed the validity of principle model , confirming ease of use and perceived usefulness as main determinants of technology acceptance as suggested by Davis. This study also suggested that the quality of system and personal ability to use technology were good predictors of ease of use, while social interaction and images appeared to be good predictors of perceived usefulness of technology. Furthermore, personal innovativeness proved to have significant effect on intention to use among potential ICT users.

  10. A hierarchical decision making model for the prioritization of distributed generation technologies: A case study for Iran

    International Nuclear Information System (INIS)

    Zangeneh, Ali; Jadid, Shahram; Rahimi-Kian, Ashkan

    2009-01-01

    The purpose of this paper is to present an assessment and evaluation model for the prioritization of distributed generation (DG) technologies, both conventional and renewable, to meet the increasing load due to the growth rate in Iran, while considering the issue of sustainable development. The proposed hierarchical decision making strategy is presented from the viewpoint of either the distribution company (DisCo) or the independent power producer (IPP) as a private entity. Nowadays, DG is a broadly-used term that covers various technologies; however, it is difficult to find a unique DG technology that takes into account multiple considerations, such as economic, technical, and environmental attributes. For this purpose, a multi-attribute decision making (MADM) approach is used to assess the alternatives for DG technology with respect to their economic, technical and environmental attributes. In addition, a regional primary energy attribute is also included in the hierarchy to express the potential of various kinds of energy resources in the regions under study. The obtained priority of DG technologies help decision maker in each region how allocate their total investment budget to the various technologies. From the performed analysis, it is observed that gas turbines are almost the best technologies for investing in various regions of Iran. At the end of the decision making process, a sensitivity analysis is performed based on the state regulations to indicate how the variations of the attributes' weights influence the DG alternatives' priority. This proposed analytical framework is implemented in seven parts of Iran with different climatic conditions and energy resources.

  11. Measuring Effectiveness of Information, Communication and Technology (ICT) Tools in Teaching School Children: A Case Study from Chattisgarh State, India

    Science.gov (United States)

    Rao, J. Durga Prasad; Singh, Raksha

    2011-01-01

    The study was conducted to determine the effectiveness of Information Communication and Technology tools viz DLP (Distance Learning Projector) and Computer/Laptop in comparison with selected instructional media for teaching primary and secondary school pupils. It examined the effect of grade on the performance of the pupils taught with four…

  12. The Perception of Web 2.0 Technologies on Teaching and Learning in Higher Education: A Case Study

    Science.gov (United States)

    Zelick, Stacia A.

    2013-01-01

    The purpose of this study was to examine faculty members' perception of Web 2.0 technologies on teaching and learning in higher education compared to traditional classroom teaching methods in programs at a higher education institutions to establish if relationships prevailed in their delivery of courses through the use of Web 2.0 technologies…

  13. Probability Elicitation to Inform Early Health Economic Evaluations of New Medical Technologies : A Case Study in Heart Failure Disease Management

    NARCIS (Netherlands)

    Cao, Qi; Postmus, Douwe; Hillege, Hans L.; Buskens, Erik

    Objectives: Early estimates of the commercial headroom available to a new medical device can assist producers of health technology in making appropriate product investment decisions. The purpose of this study was to illustrate how this quantity can be captured probabilistically by combining

  14. RFID technology and the EPC network as enablers of mobile business: a case study in a retail supply chain

    NARCIS (Netherlands)

    Wamba, S.F.; Bendavid, Y.; Lefebvre, L.A.; Lefebvre, E.

    2006-01-01

    The main objective of this study is to explore the impact of integrating Radio Frequency Identification (RFID) technology and the Electronic Product Code (EPC) network into one specific supply chain in the retail industry and investigate their potentials as enablers of Mobile Business (m-business).

  15. Critical Skills for Supervisors of Information Technology Project Managers in Government: An Interpretative Phenomenological Analysis Case Study

    Science.gov (United States)

    Burns, Jacqueline

    2016-01-01

    A company or government is only as good as its most qualified employees. This qualitative interpretative phenomenological study sought to understand what skills are needed to supervise government information technology (IT) project managers through their lived experience. Fifteen participants in the field of government IT were interviewed. They…

  16. "Kaizen" and Technology Transfer Instructors as Work-based Learning Facilitators in Overseas Transplants: A Case Study.

    Science.gov (United States)

    Elsey, Barry; Fujiwara, Asahi

    2000-01-01

    A study of 240 instructors of kaizen (continuous quality improvement) and technology transfer in overseas assignments for Toyota found that commitment to work and corporate cultural values were significant. Instructors recognized the responsibility and challenges of communicating and transferring their know-how across cultures. (SK)

  17. The Perception of Women Contending for First Place in the Information Technology World: A Qualitative Case Study

    Science.gov (United States)

    Claggett, Gwendolyn P.

    2016-01-01

    Gender differences have impacted the leadership IT (information technology) environment for decades. Research continues to study the barriers and triumphs women endure within the technical leadership world. Over the past decade, women have strived ahead by ignoring the gender negativity and taken a permanent position in the IT leadership role. The…

  18. New policies for science and technology and the impacts on public research institutes: a case study in Brazil

    Directory of Open Access Journals (Sweden)

    Thales Haddad Novaes de Andrade

    2013-08-01

    Full Text Available This article aims to discuss how technological production has been affected by new organizational patterns of funding and evaluation, international transformations in terms of the reorganization of research centers, and changes in innovation practices. Researchers and scientists have had their activities redefined through new organizational formats that today are well-established. The purpose here is to verify the impacts that these tendencies have had on the scientific and technological production of Public Research Institutes. We analyzed the case of the Technological Research Institute (Instituto de Pesquisas Tecnológicas - IPT and found that from the 1990s onwards, research institutions in Brazil internalized organizational forms that enabled them to place themselves in the international agenda as reputational agents, and that the IPT internalized an international agenda, hiring new services and with new budgets. The institutions of scientific research tended to align their interests with hegemonic devices and to withdraw the participation of agents not able to make explicit the new formulas for recognition in the scientific field.

  19. The order and priority of research and design method application within an assistive technology new product development process: a summative content analysis of 20 case studies.

    Science.gov (United States)

    Torrens, George Edward

    2018-01-01

    Summative content analysis was used to define methods and heuristics from each case study. The review process was in two parts: (1) A literature review to identify conventional research methods and (2) a summative content analysis of published case studies, based on the identified methods and heuristics to suggest an order and priority of where and when were used. Over 200 research and design methods and design heuristics were identified. From the review of the 20 case studies 42 were identified as being applied. The majority of methods and heuristics were applied in phase two, market choice. There appeared a disparity between the limited numbers of methods frequently used, under 10 within the 20 case studies, when hundreds were available. Implications for Rehabilitation The communication highlights a number of issues that have implication for those involved in assistive technology new product development: •The study defined over 200 well-established research and design methods and design heuristics that are available for use by those who specify and design assistive technology products, which provide a comprehensive reference list for practitioners in the field; •The review within the study suggests only a limited number of research and design methods are regularly used by industrial design focused assistive technology new product developers; and, •Debate is required within the practitioners working in this field to reflect on how a wider range of potentially more effective methods and heuristics may be incorporated into daily working practice.

  20. Constructive Technology Assessmentand Technology Dynamics. The Case of Clean Technologies

    NARCIS (Netherlands)

    Schot, Johan

    1992-01-01

    A synthesis of neo-Schumpeterian evolutionary, sociological, and historical coevolution ary models could be used for constructive technology assessment, aimed at the active management of the process of technological change. This article proposes a synthetic quasi-evolutionary model, in which

  1. Application of Microbial Technology Used in Bioremediation of Urban Polluted River: A Case Study of Chengnan River, China

    Directory of Open Access Journals (Sweden)

    Hong Gao

    2018-05-01

    Full Text Available Contrary to the constraints in time, investment, and management of the traditional technology for waste water treatment, this paper seeks to propose a more advanced, reliable, and affordable new technology to restore urban polluted rivers to pristine quality levels. The paper also presents new ideas on the selection and use of microbial agents to improve the efficiency of pollution removal. It presents the successful implementation of microbial technology (MT on Chengnan River, which was heavily polluted before MT implementation. Without artificial aeration, sediment dredging, or complete sewage interception, we directly sprayed a previously configured HP-RPe-3 Microbial Agent into the water body and sediment. We considered the feasibility of MT for treating polluted urban rivers from the perspective of several water quality indices evaluation methods. After the treatment, the concentration of dissolved oxygen (DO reached 5.0 mg/L, the removal rates of ammonia nitrogen (NH3-N and chemical oxygen demand (COD reached 20% and 38% respectively, and the average degradation rate of total phosphorus (TP along river was close to 15%. Also, the Nemerow Index of the river was reduced from 2.7 to 1.9. The Fuzzy Comprehensive Index shows a tendency for improvement from Inferior Grade V to a better grade (approximately Grade III. The color of the river water changed, from black or dark green, to its original color. The results indicate that the bioremediation technology of directly adding microbial agents mainly aimed for the degradation of NH3-N can preliminarily eliminate the black-odor phenomenon of urban rivers, and improve their water quality. It is expected that the MT application, and the concept of how to select the corresponding microbial agents according to main pollutants, can be widely accepted and applied to similar cases.

  2. The Effects of Using Geography Information Systems in Social Studies on Students Attitudes about Information Technology: Case of Ankara

    Directory of Open Access Journals (Sweden)

    Nihat ŞİMŞEK

    2011-12-01

    Full Text Available The motivation and attention of students in the classroom are on the increase of using different methods. Like other lectures, in social studies using computers and information technologies is one of the methods that keeps the interest of students alive and increases participation of them. This study, aiming at measuring attitudes of 6th grade students to information technologies is conducted by using qualitative and quasi-experimental methods. The sample of this study is comprised by students of Cizmeci Elementary School, located in Ankara Kecioren. 33 students were chosen for experimental group and 35 students were chosen for control group, comprising a total of 68 students. As a result of the study, a significant difference between total computer attitude scale points of the pre and post-tests in both experimental and control groups was determined

  3. A case study :creating and sustaining competitive advantage through an information technology application in the lodging industry

    OpenAIRE

    Cho, Wonae

    1996-01-01

    The use of information technology (IT) is becoming an essential component within the commercial sector. While large number of companies have adopted IT applications to achieve competitive advantage, and number of studies have been done on competitive advantage through an IT application, it is not clear what the impact of an IT application on competitive advantage is. The purpose of this study was to examine the impact of an IT application on competitive advantage and how to cre...

  4. A retrospective study of New Zealand case law involving assisted reproduction technology and the social recognition of 'new' family.

    Science.gov (United States)

    Legge, M; Fitzgerald, R; Frank, N

    2007-01-01

    The New Zealand Human Assisted Reproductive Technology (HART) Act became law in 2004. In this article, we provide a retrospective analysis of New Zealand case law from September 1990 to March 2004, leading up to the creation of the HART Act. We examine the new understandings of parenting (developed through the routine use of ART in New Zealand) which the case law attempted to test. We examine these concepts against the previous understandings of family enshrined in the pre-existing legislation, which formed the basis for judicial rulings in the various cases to which we refer. In conclusion, we provide a brief summary of the 2004 HART legislation and draw comparisons between the old and new legislative and bureaucratic frameworks that define and support New Zealand family structure. We suggest that a change in cultural backdrop is occurring from the traditional western ideology of the nuclear family towards the traditional Maori concept of family formation, which includes a well-accepted traditional practice of guardianship and a more open and extended family structure. This 'new' structure reflects the contemporary lived experience of family kinship in western societies as individualized and open to choice.

  5. Technology Assisted Language Learning is a silver bullet for enhancing Language competence and performance: A Case Study

    Directory of Open Access Journals (Sweden)

    Jameel Ahmad

    2016-11-01

    Full Text Available Technology Assisted Language Learning (TALL is an infallible means to develop profound knowledge and wide range of language skills. It instills in EFL learners an illimitable passion for task-based and skills oriented learning rather than rote memorization. New technological gadgets have commoditized a broad-based learning and teaching avenues and brought the whole learning process to life. A vast variety of authentic online- learning resources, motivational visual prompts, exciting videos, web-based interactivity and customizable language software, email, discussion forums, Skype, Twitter, apps, Internet mobiles, Facebook and YouTube have become obtrusive tools to enhance competence and performance in EFL teaching and learning realms. Technology can also provide various types of scaffolding for students learning to read. Nevertheless, instructors can also enhance their pedagogical effectiveness. However, the main focus of interest in this study is to ascertain to what extent the modern technological devices augment learners’ competence and performance specifically in vocabulary learning, grammatical accuracy and listening/ speaking skills. The remarkable scores of empirical surveys conducted in the present study reveal that TALL does assist learners to improve listening / speaking skills, pronunciation, extensive vocabulary and grammatical accuracy. The findings also manifest that the hybridity, instantaneity and super-diversity of digital learning lay far-reaching impact on learners' motivation for learning and incredibly maneuver learners to immerse in the whole learning process.

  6. Employment creation, technological efficiency, and distributional judgements : a case study in road construction / [by] G.W. Irvin

    NARCIS (Netherlands)

    G.W. Irvin (George)

    1975-01-01

    textabstractThe present article is concerned with the relationship between distributional and efficiency criteria and the objective of employment creation in a single sector, that of road construction. The work is based on a series of case studies carried out in Iran, one such study being presented

  7. CASE STUDY CRITIQUE; UPPER CLINCH CASE STUDY

    Science.gov (United States)

    Case study critique: Upper Clinch case study (from Research on Methods for Integrating Ecological Economics and Ecological Risk Assessment: A Trade-off Weighted Index Approach to Integrating Economics and Ecological Risk Assessment). This critique answers the questions: 1) does ...

  8. Global Assessment of Hydrogen Technologies – Tasks 3 & 4 Report Economic, Energy, and Environmental Analysis of Hydrogen Production and Delivery Options in Select Alabama Markets: Preliminary Case Studies

    Energy Technology Data Exchange (ETDEWEB)

    Fouad, Fouad H.; Peters, Robert W.; Sisiopiku, Virginia P.; Sullivan Andrew J.; Gillette, Jerry; Elgowainy, Amgad; Mintz, Marianne

    2007-12-01

    This report documents a set of case studies developed to estimate the cost of producing, storing, delivering, and dispensing hydrogen for light-duty vehicles for several scenarios involving metropolitan areas in Alabama. While the majority of the scenarios focused on centralized hydrogen production and pipeline delivery, alternative delivery modes were also examined. Although Alabama was used as the case study for this analysis, the results provide insights into the unique requirements for deploying hydrogen infrastructure in smaller urban and rural environments that lie outside the DOE’s high priority hydrogen deployment regions. Hydrogen production costs were estimated for three technologies – steam-methane reforming (SMR), coal gasification, and thermochemical water-splitting using advanced nuclear reactors. In all cases examined, SMR has the lowest production cost for the demands associated with metropolitan areas in Alabama. Although other production options may be less costly for larger hydrogen markets, these were not examined within the context of the case studies.

  9. Implications of Information Technology for Employment, Skills, and Wages: Findings from Sectoral and Case Study Research. Final Report

    Science.gov (United States)

    Handel, Michael J.

    2004-01-01

    This paper reviews evidence from industry-specific and case studies that shed light on the extent to which computers and automation eliminate jobs, raise job skill requirements, and, consequently, contribute to increased wage inequality between less- and more skilled workers. This paper complements a previous review of large-scale econometric…

  10. Research and deployment priorities for renewable technologies: Quantifying the importance of various renewable technologies for low cost, high renewable electricity systems in an Australian case study

    International Nuclear Information System (INIS)

    Riesz, Jenny; Elliston, Ben

    2016-01-01

    This study aims to identify research priorities to enable low cost, high renewable power systems. An evolutionary program optimises the mix of technologies in 100% renewable energy portfolios (RE) in the Australian National Electricity Market. Various technologies are reduced in availability to determine their relative importance for achieving low costs. The single most important factor is found to be the integration of large quantities of wind; therefore wind integration is identified as a research priority. In contrast, photovoltaics are found to “saturate” the system at less than 10% of total energy (in the absence of storage or demand management, installation of further photovoltaics does not contribute significant further value). This indicates that policies to promote utility-scale photovoltaics should be considered in partnership with complementary measures (such as demand side participation and storage). Biofuelled gas turbines are found to be important; a complete absence of bioenergy increases costs by AU$20–30/MWh, and even having only 0.1 TWh per year of bioenergy available reduces average costs by AU$3–4/MWh. Limits on the non-synchronous penetration (NSP) are found to be relatively expensive, suggesting a significant research priority around finding alternative approaches to providing synchronous services, such as inertia. Geothermal and concentrating solar thermal technologies do not appear essential as long as sufficient wind and peaking bioenergy is available. - Highlights: • Photovoltaics saturate early, suggesting they need complementary measures. • Biofuelled gas turbines or another peaking technology are important for low costs. • Limits on the non-synchronous penetration are relatively expensive.

  11. Exploring Quality Teaching of Information and Communication Technology in New South Wales and Yenbai High Schools: A Comparative Case Study

    Science.gov (United States)

    Tran, Manh Thang

    This study compares ICT policy and curriculum and assessment practices between Australian and Vietnamese secondary schools, and investigates differences between these two school systems. Document analyses and case studies were used to examine the key differences in ICT curriculum and policy and assessment practices between Australian and Vietnamese secondary schools. The document analyses focused on the intended ICT policy and curriculum and assessment, as presented in official documents in both countries. Using a case study approach for in-depth examination, two secondary schools were selected (one from Yenbai province, Vietnam and one from Sydney, New South Wales, Australia). Two principals and three teachers were interviewed. Classroom teaching and assessment practices were observed, and principals and teachers' views were obtained through semi-structured interviews and extensive discussions. Findings from the two case studies were compared with the findings from the document analysis. This study explored and analysed differences in ICT teaching, learning, assessment, and achievement between Vietnamese and Australian secondary students. It was found that that Australian ICT school curricula and assessment differed markedly from the Vietnamese system. Student ICT achievement in these Australian and Vietnamese schools could not only be attributed to higher standards of intended ICT curricula and assessment, or teacher knowledge or classroom practices. These differences are better explained by economic and cultural factors, ICT policies and their degrees of implementation, and extra ICT curricula. In order to bridge the gap and implement adequate ICT curricula and policies, rigorous professional training in teaching and assessment is essential for both Australian and Vietnamese teachers. In order to improve Australian students' ICT achievement, achievement motivation must be addressed. Many challenging aspects were found in ICT policies and classrooms in the

  12. A Multilevel Association Model for IT Employees’ Life Stress and Job Satisfaction: An Information Technology (IT Industry Case Study

    Directory of Open Access Journals (Sweden)

    Mehmood Khalid

    2017-01-01

    Full Text Available The aim of this research was to investigate the association among IT employees’ life stress and job satisfaction in information technology (IT firms. Data on 250 IT employees’ in 30 working groups was obtained from 10 Information Technology (IT Chinese firms from Beijing, and analyzed using hierarchical linear modeling (HLM. Results found momentous association among life stress of IT employees’ and their job satisfaction at an individual-level and group-level in IT firms. Furthermore, life stress in Beijing at group-level moderates the association among job satisfaction and IT employees’ life stress at an individual-level. Finally, limitations and implications of the present study are also discussed.

  13. Curriculum Evaluation and Employers Opinions: the case study of Educational Technology Program in Bachelor Degree (Continuing Program

    Directory of Open Access Journals (Sweden)

    Nakhon Lalognam

    2016-09-01

    Full Text Available The purposes of this research were: 1 to evaluate the Educational Technology Program (Continuing Program in Bachelor Degree curriculum which is revised in 2007 by applying CIPP model for evaluation. 2 to study the opinions of the employers about the ideal characteristics and actual characteristics of graduates. 3 to study the opinions for the requirements of the Educational Technology Program in Bachelor Degree (Continuing Program and knowledge implementation in work of graduates. 4 to make the suggestions and guidelines to improve the Educational Technology Program in Bachelor Degree (Continuing Program to achieve potentiality and responsive for the requirements of learners and employers. The sample of this research were 310 persons ; consisted of graduates in the Educational Technology Program in Bachelor Degree (Continuing Program in academic year 2006 - 2010, the committee of the Educational Technology Program in Bachelor Degree (Continuing Program , instructors and employers by using Multi-stage Random Sampling and Simple Random Sampling. The instruments of this research were the 5 levels rating scale questionnaire and the structured interview type. They consisted of 3 sets: 1 for graduates, 2 for the committee of the Educational Technology Program in Bachelor Degree (Continuing Program and 3 for instructors and employers. The research found that: 1. The results of evaluation on the Educational Technology Program in Bachelor Degree (Continuing Program which is revised in 2007 were: 1.1 The opinions of graduates to curriculum in all of aspects were average at the uncertain level which the context aspect was at the high level, input aspect was at the uncertain level, process aspect was at the uncertain level and product aspect was at the high level. 1.2 The opinions of the curriculum committee and instructors to curriculum in all of aspects were average at the high level which the context aspect was at the high level, input aspect was at the

  14. Scenario Development and Delphi Application in Life Cycle Assessment for Assessing Environmental Impact of New Technology Case Study: Removal of Wind Turbines Project

    Directory of Open Access Journals (Sweden)

    Devina Fitrika Dewi

    2016-05-01

    Full Text Available Certain technology is intended to create eco-efficient products or process or is developed as answer to the recent challenge. This kind of technology consequently can also create another impact therefore it shall be assessed and analyzed.The focus of the study is on assessment method namely Life Cycle Analysis (LCA, Scenario development and Delphi application. The objective is to understand benefits and drawbacks of the combined methodology and observe practicality of its implementation for assessing new technology. The distinctive feature comes from the combination of social and technological foresight (as Delphi application and future studies (as Scenario development which are applied in the environmental assessment of a product (by Life Cycle Analysis.The utilization of LCA-Scenario-Delphi case study as an explanatory example is presented in the Removal Wind Turbines Project by the Danish Energy Agency. The wind turbine is considered new technology with some of it phases are yet to occur, for example: removal of turbines after phase out stage. Technology Assessment by LCA-Scenario-Delphi is complicated procedure, but necessary to validate the results. The drawbacks of this procedure are extensive time it consumes and the dependency on public participation and/or expert willingness to participate. Nonetheless, its advantages are due to its interactive feature; integration of knowledge from different areas of expertise and its assessment’s characteristic which focuses on process.

  15. Assessment of Student Performance for Course Examination Using Rasch Measurement Model: A Case Study of Information Technology Fundamentals Course

    Directory of Open Access Journals (Sweden)

    Amir Mohamed Talib

    2018-01-01

    Full Text Available This paper describes a measurement model that is used to measure the student performance in the final examination of Information Technology (IT Fundamentals (IT280 course in the Information Technology (IT Department, College of Computer & Information Sciences (CCIS, Al-Imam Mohammad Ibn Saud Islamic University (IMSIU. The assessment model is developed based on students’ mark entries of final exam results for the second year IT students, which are compiled and tabulated for evaluation using Rasch Measurement Model, and it can be used to measure the students’ performance towards the final examination of the course. A study on 150 second year students (male = 52; female = 98 was conducted to measure students’ knowledge and understanding for IT280 course according to the three level of Bloom’s Taxonomy. The results concluded that students can be categorized as poor (10%, moderate (42%, good (18%, and successful (24% to achieve Level 3 of Bloom’s Taxonomy. This study shows that the students’ performance for the set of IT280 final exam questions was comparatively good. The result generated from this study can be used to guide us to determine the appropriate improvement of teaching method and the quality of question prepared.

  16. Use and User Perception of Electronic Information Resources: A Case Study of Siva Institute of Frontier Technology, India

    Directory of Open Access Journals (Sweden)

    Velmurugan Chandran

    2013-12-01

    Full Text Available The present study aims to explore the use and user perception of electronic resources in Siva Institute of Frontier Technology, India. A total number of 123 users were taken into account for the study through a questionnaire-based survey method. A well-structured questionnaire was designed and distributed to the selected 200 students and staff members. 123 copies of the questionnaires were returned dully filled in and the overall response rate was 61.50 percent. The questionnaire contained both open- and close-ended questions. The collected data were classified, analyzed, and tabulated by using simple statistical methods. This study covers the impact of electronic resources on students and faculty in their academic pursuit.

  17. Cases, Simulacra, and Semantic Web Technologies

    Science.gov (United States)

    Carmichael, P.; Tscholl, M.

    2013-01-01

    "Ensemble" is an interdisciplinary research and development project exploring the potential role of emerging Semantic Web technologies in case-based learning across learning environments in higher education. Empirical findings have challenged the claim that cases "bring reality into the classroom" and that this, in turn, might…

  18. Analysis of low-carbon industrial symbiosis technology for carbon mitigation in a Chinese iron/steel industrial park: A case study with carbon flow analysis

    International Nuclear Information System (INIS)

    Zhang, Hui; Dong, Liang; Li, Huiquan; Fujita, Tsuyoshi; Ohnishi, Satoshi; Tang, Qing

    2013-01-01

    CO 2 mitigation strategies in industrial parks are a significant component of the Chinese climate change mitigation policy, and industrial symbiosis can provide specific CO 2 mitigation opportunity. Technology is important to support symbiosis, but few studies in China have focused on this topic at the industrial park level. This research presented a case study in a national iron and steel industrial park in China. Focus was given onto carbon mitigation through industrial symbiosis technology using substance flow analysis (SFA). Three typical iron and steel industry technologies, including coke dry quenching (CDQ), combined cycle power plant (CCPP), and CO 2 capture by slag carbonization (CCSC) were evaluated with SFA. Technology assessment was further conducted in terms of carbon mitigation potential and unit reduction cost. Compared with the Business as usual (BAU) scenario, application with CDQ, CCPP, and CCSC reduced the net carbon emissions by 56.18, 134.43, and 222.89 kg CO 2 per ton crude steel inside the industrial parks, respectively, including both direct and indirect emissions. Economic assessment revealed that the unit costs for the three technologies were also high, thereby necessitating national financial support. Finally, relevant policy suggestions and future concerns were proposed and discussed. - Highlights: • A typical carbon mitigation case study on China iron/steel industrial park. • Using carbon SFA to investigate mitigation effects of industrial symbiosis technology. • CCPP greatly reduced the indirect carbon emission embodied in power purchase. • CCSC reduced the carbon emission by distributing fixed carbon into by-product. • Specific low carbon-tech promotion policies fit to China was discussed and proposed

  19. Using Web Crawler Technology for Text Analysis of Geo-Events: A Case Study of the Huangyan Island Incident

    Science.gov (United States)

    Hu, H.; Ge, Y. J.

    2013-11-01

    With the social networking and network socialisation have brought more text information and social relationships into our daily lives, the question of whether big data can be fully used to study the phenomenon and discipline of natural sciences has prompted many specialists and scholars to innovate their research. Though politics were integrally involved in the hyperlinked word issues since 1990s, automatic assembly of different geospatial web and distributed geospatial information systems utilizing service chaining have explored and built recently, the information collection and data visualisation of geo-events have always faced the bottleneck of traditional manual analysis because of the sensibility, complexity, relativity, timeliness and unexpected characteristics of political events. Based on the framework of Heritrix and the analysis of web-based text, word frequency, sentiment tendency and dissemination path of the Huangyan Island incident is studied here by combining web crawler technology and the text analysis method. The results indicate that tag cloud, frequency map, attitudes pie, individual mention ratios and dissemination flow graph based on the data collection and processing not only highlight the subject and theme vocabularies of related topics but also certain issues and problems behind it. Being able to express the time-space relationship of text information and to disseminate the information regarding geo-events, the text analysis of network information based on focused web crawler technology can be a tool for understanding the formation and diffusion of web-based public opinions in political events.

  20. Probability elicitation to inform early health economic evaluations of new medical technologies: a case study in heart failure disease management.

    Science.gov (United States)

    Cao, Qi; Postmus, Douwe; Hillege, Hans L; Buskens, Erik

    2013-06-01

    Early estimates of the commercial headroom available to a new medical device can assist producers of health technology in making appropriate product investment decisions. The purpose of this study was to illustrate how this quantity can be captured probabilistically by combining probability elicitation with early health economic modeling. The technology considered was a novel point-of-care testing device in heart failure disease management. First, we developed a continuous-time Markov model to represent the patients' disease progression under the current care setting. Next, we identified the model parameters that are likely to change after the introduction of the new device and interviewed three cardiologists to capture the probability distributions of these parameters. Finally, we obtained the probability distribution of the commercial headroom available per measurement by propagating the uncertainty in the model inputs to uncertainty in modeled outcomes. For a willingness-to-pay value of €10,000 per life-year, the median headroom available per measurement was €1.64 (interquartile range €0.05-€3.16) when the measurement frequency was assumed to be daily. In the subsequently conducted sensitivity analysis, this median value increased to a maximum of €57.70 for different combinations of the willingness-to-pay threshold and the measurement frequency. Probability elicitation can successfully be combined with early health economic modeling to obtain the probability distribution of the headroom available to a new medical technology. Subsequently feeding this distribution into a product investment evaluation method enables stakeholders to make more informed decisions regarding to which markets a currently available product prototype should be targeted. Copyright © 2013. Published by Elsevier Inc.

  1. Investigating the Predictive Power of TAM: A Case Study of CEGEP Students' Intentions to Use Online Learning Technologies

    Science.gov (United States)

    Bazelais, Paul; Doleck, Tenzin; Lemay, David John

    2018-01-01

    The purpose of this research is to investigate pre-university science "Collège d'enseignement général et professionnel" (CEGEP) students' behavioral intentions towards using online learning technologies. Heretofore, CEGEP students' use of technology has received scant attention, yet online learning technologies are found to play an…

  2. Undergraduate Student Perceptions Regarding the Use of Educational Technology--A Case Study in a Statistics Service Course

    Science.gov (United States)

    Nolan, Verena T.; Swart, Arthur J.

    2015-01-01

    Integrating theory with practice has become a mandatory requirement for universities of technology. Using educational technology to supplement traditional pedagogical approaches has contributed significantly to achieving this mandate. However, which educational technologies could help improve the educational experience of students in a statistical…

  3. Assistive Technology as an artificial intelligence opportunity: Case study of letter-based, head movement driven communication.

    Science.gov (United States)

    Miksztai-Réthey, Brigitta; Faragó, Kinga Bettina

    2015-01-01

    We studied an artificial intelligent assisted interaction between a computer and a human with severe speech and physical impairments (SSPI). In order to speed up AAC, we extended a former study of typing performance optimization using a framework that included head movement controlled assistive technology and an onscreen writing device. Quantitative and qualitative data were collected and analysed with mathematical methods, manual interpretation and semi-supervised machine video annotation. As the result of our research, in contrast to the former experiment's conclusions, we found that our participant had at least two different typing strategies. To maximize his communication efficiency, a more complex assistive tool is suggested, which takes the different methods into consideration.

  4. Application of 3D laser scanning technology in historical building preservation: a case study of a Chinese temple

    Science.gov (United States)

    Chang, Yu Min; Lu, Nien Hua; Wu, Tsung Chiang

    2005-06-01

    This study applies 3D Laser scanning technology to develop a high-precision measuring system for digital survey of historical building. It outperformed other methods in obtaining abundant high-precision measuring points and computing data instantly. In this study, the Pei-tien Temple, a Chinese Taoism temple in southern Taiwan famous for its highly intricate architecture and more than 300-year history, was adopted as the target to proof the high accuracy and efficiency of this system. By using French made MENSI GS-100 Laser Scanner, numerous measuring points were precisely plotted to present the plane map, vertical map and 3D map of the property. Accuracies of 0.1-1 mm in the digital data have consistently been achieved for the historical heritage measurement.

  5. Effectiveness of technology-assisted case management in low income adults with type 2 diabetes (TACM-DM: study protocol for a randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Strom Joni L

    2011-10-01

    Full Text Available Abstract Background An estimated 1 in 3 American adults will have diabetes by the year 2050. Nationally, South Carolina ranks 10th in cases of diagnosed diabetes compared to other states. In adults, type 2 diabetes (T2DM accounts for approximately 90-95% of all diagnosed cases of diabetes. Clinically, provider and health system factors account for Methods We describe a four-year prospective, randomized clinical trial, which will test the effectiveness of technology-assisted case management in low income rural adults with T2DM. Two-hundred (200 male and female participants, 18 years of age or older and with an HbA1c ≥ 8%, will be randomized into one of two groups: (1 an intervention arm employing the innovative FORA system coupled with nurse case management or (2 a usual care group. Participants will be followed for 6-months to ascertain the effect of the interventions on glycemic control. Our primary hypothesis is that among indigent, rural adult patients with T2DM treated in FQHC's, participants randomized to the technology-assisted case management intervention will have significantly greater reduction in HbA1c at 6 months of follow-up compared to usual care. Discussion Results from this study will provide important insight into the effectiveness of technology-assisted case management intervention (TACM for optimizing diabetes care in indigent, rural adult patients with T2DM treated in FQHC's. Trial Registration National Institutes of Health Clinical Trials Registry (http://ClinicalTrials.gov identifier# NCT01373489

  6. Electronic medical record in central polyclinic of isfahan oil industry: a case study based on technology acceptance model.

    Science.gov (United States)

    Tavakoli, Nahid; Jahanbakhsh, Maryam; Shahin, Arash; Mokhtari, Habibollah; Rafiei, Maryam

    2013-03-01

    Today, health information technologies are base of health services and Electronic Medical Record is one of them. The purpose of this paper is to investigate the Technology Acceptance Model (TAM) on EMR at Central Polyclinic Oil Industry that is a pioneer in implementation of EMR in Isfahan. This study was an applied and analytical survey that it was done at the Central Polyclinic Oil Industry. Because statistical population were limited, sampling bas been done by conducting the census and the sample was according to the population. The data was collected by a researcher-made questionnaire that it was validated by experts and its reliability was confirmed by test retest. The questionnaire was developed in 5 scopes including external factors (data quality and user interface), perceived usefulness, perceived ease of usefulness, attitude toward using, and behavioral intention to use. The Results analyzed by SPSS. There was a significant relationship between data quality with PU(r=/295, p/005). The survey of the scopes in the polyclinic showed that there is relationship among user interface, perceived usefulness, perceived ease of usefulness, attitude toward using, and behavioral intention to use, but data quality has no relationship with attitude. It seems the system designers didn't consider to data quality characteristics. It is proposed that they consult with health information management professionals for improvement the existing system.

  7. Canonical correlation analysis between collaborative networks and innovation: A case study in information technology companies in province of Tehran, Iran

    Directory of Open Access Journals (Sweden)

    Ahmad Jafar Nejad

    2013-07-01

    Full Text Available The increase competitions as well as technological advancements have created motivation among business owners to look for more innovative ideas from outside their organizations. Many enterprises collaborate with other organizations to empower themselves through innovative ideas. These kinds of collaborations can be observed as a concept called Regional Innovation System. These collaborations include inter-firm collaborations, research organizations, intermediary institutions and governmental agencies. The primary objective of this paper is to evaluate relationships between Collaborative Networks and Innovation in information technology business units located in province of Tehran, Iran. The research method utilized for the present study is descriptive-correlation. To evaluate the relationships between independent and dependent variables, canonical correlation analysis (CCA is used. The results confirm the previous findings regarding the relationship between Collaborative Networks and Innovation. Among various dimensions of Collaboration, Collaboration with governmental agencies had a very small impact on the relationship between collaboration networks and innovation. In addition, the results show that in addition to affecting product innovation and process innovation, collaboration networks also affected management innovation.

  8. Navigating the “paradox of openness” in energy and transport innovation: Insights from eight corporate clean technology research and development case studies

    International Nuclear Information System (INIS)

    Sovacool, Benjamin K.; Jeppesen, Jakob; Bandsholm, Jesper; Asmussen, Joakim; Balachandran, Rakulan; Vestergaard, Simon; Andersen, Thomas Hauerslev; Sørensen, Thomas Klode; Bjørn-Thygesen, Frans

    2017-01-01

    Using an inductive case study approach drawn from original interview data, this article investigates the innovation approaches among a sample of international energy companies, or corporate firms. It first presents a conceptual framework synthesized from the business studies, entrepreneurship, evolutionary economics, innovation studies, management science, organization studies, political science, and sociology literature. This framework suggests that corporate approaches to clean technology innovation will cut across the four dimensions of organizational multiplicity and stakeholder involvement, information sharing, coordination and control, and market orientation. It then explores how eight firms—the Algal Carbon Conversion Flagship and Aurora Algae (biofuel), DONG and Statoil (carbon capture and storage), Tesla and Volkswagen (electric vehicles), and Siemens and Vestas (offshore wind turbines)—approach clean technology development with “open innovation” attributes mixed with “closed” attributes. Although the study finds striking similarities among the particular approaches embraced by each corporate actor, it also notes that approaches are technology and firm specific, and the potential for different permutations leads to an almost endless number of possible stylistic combinations. The innovation profiles depicted also reveal conflict and competition among various stakeholders, the implication being that corporate innovation in the energy sector remains a conflicted, disjointed, and messy process. - Highlights: • Corporate firms remain under-examined in the energy studies literature. • Corporate approaches to clean technology innovation cut across “open” and “closed” attributes. • The corporate innovation profiles depicted reveal elements of conflict and competition.

  9. Measuring efficiency and productivity growth of new technology-based firms in business incubators: the Portuguese case study of Madan Parque.

    Science.gov (United States)

    Grilo, A; Santos, J

    2015-01-01

    Business incubators can play a major role in helping to turn a business idea into a technology-based organization that is economically efficient. However, there is a shortage in the literature regarding the efficiency evaluation and productivity evolution of the new technology-based firms (NTBFs) in the incubation scope. This study develops a model based on the data envelopment analysis (DEA) methodology, which allows the incubated NTBFs to evaluate and improve the efficiency of their management. Moreover, the Malmquist index is used to examine productivity change. The index is decomposed into multiple components to give insights into the root sources of productivity change. The proposed model was applied in a case study with 13 NTBFs incubated. From that study, we conclude that inefficient firms invest excessively in research and development (R&D), and, on average, firms have a productivity growth in the period of study.

  10. Measuring Efficiency and Productivity Growth of New Technology-Based Firms in Business Incubators: The Portuguese Case Study of Madan Parque

    Science.gov (United States)

    Grilo, A.; Santos, J.

    2015-01-01

    Business incubators can play a major role in helping to turn a business idea into a technology-based organization that is economically efficient. However, there is a shortage in the literature regarding the efficiency evaluation and productivity evolution of the new technology-based firms (NTBFs) in the incubation scope. This study develops a model based on the data envelopment analysis (DEA) methodology, which allows the incubated NTBFs to evaluate and improve the efficiency of their management. Moreover, the Malmquist index is used to examine productivity change. The index is decomposed into multiple components to give insights into the root sources of productivity change. The proposed model was applied in a case study with 13 NTBFs incubated. From that study, we conclude that inefficient firms invest excessively in research and development (R&D), and, on average, firms have a productivity growth in the period of study. PMID:25874266

  11. Measuring Efficiency and Productivity Growth of New Technology-Based Firms in Business Incubators: The Portuguese Case Study of Madan Parque

    Directory of Open Access Journals (Sweden)

    A. Grilo

    2015-01-01

    Full Text Available Business incubators can play a major role in helping to turn a business idea into a technology-based organization that is economically efficient. However, there is a shortage in the literature regarding the efficiency evaluation and productivity evolution of the new technology-based firms (NTBFs in the incubation scope. This study develops a model based on the data envelopment analysis (DEA methodology, which allows the incubated NTBFs to evaluate and improve the efficiency of their management. Moreover, the Malmquist index is used to examine productivity change. The index is decomposed into multiple components to give insights into the root sources of productivity change. The proposed model was applied in a case study with 13 NTBFs incubated. From that study, we conclude that inefficient firms invest excessively in research and development (R&D, and, on average, firms have a productivity growth in the period of study.

  12. The role of technology, product lifetime, and energy efficiency in climate mitigation: A case study of air conditioners in Japan

    International Nuclear Information System (INIS)

    Nishijima, Daisuke

    2017-01-01

    This study analyzed the impact on the life-cycle CO_2 emissions derived from a specific durable good (i.e., household air conditioners in this study) of industrial technology changes, product lifetime changes, and energy efficiency improvements. I proposed a comprehensive structural decomposition analysis including two factors of average lifetime and energy efficiency trend of household air conditioners and applied the decomposition method to the Japanese environmental input-output tables of 1990, 1995, 2000, and 2005. The empirical results show that “Household air-conditioner sector” itself contributed to reducing life-cycle CO_2 emissions derived from household air conditioners, while other sectors such as “On-site power generation sector” and “Retail trade sector” contributed to increasing life-cycle CO_2 emissions derived from household air conditioners. I also conducted combined scenario analysis about reduction potential of product lifetime and energy efficiency of air conditioners and the results showed the reduction rate of energy efficiency necessary for maintain CO_2 emissions in 2005 at 1990 level on each average lifetime scenario. (e.g. if average lifetime of air conditioners is shortened by 1 year, energy efficiency of air conditioners have to be further improved by 20.6% from current level. - Highlights: • This study provides a decomposition framework for air conditioner’s CO_2 emissions. • Technology, product lifetime and energy efficiency are considered in the framework. • “Household air conditioner” sector contributed to reducing CO_2 emissions largely. • “On-site power generation” indirectly contributed to increasing CO_2 emissions. • I showed the improvement rates of energy efficiency to achieve a reduction target.

  13. Environmental and comfort upgrading through lean technologies in informal settlements: Case study in Nairobi, Kenia and New Delhi, India

    Science.gov (United States)

    De Angelis, Enrico; Tagliabue, Lavinia Chiara; Zecchini, Paolo; Milanesi, Mattia

    2016-07-01

    affordable choices on the envelope of such simple housing. A simplified LCA (Life Cycle Assessment) evaluation on embodied energy in the proposed upgrading materials used for the housing allows assessing the environmental impact of the considered alternatives. The present study aims to find out and to propose lean technological solutions to improve users' comfort levels with simple DIY (do it yourself) modification of shelter's envelopes and basic education for the use of the housing. The paper presents the study of lean technological solutions to improve comfort conditions and durability of informal settlements located in two climate zones in the world where slums are a critical issue in the urban development. The opportunity to improve such conditions can promote an upgrading of health and wealth status in such a critical situation in which millions of people are living today. The lean, affordable and low impact technologies that have been proposed and tested by dynamic simulation could allow a widespread diffusion of the concept without burden on the strongly compromised environment. The weak and fragile areas affected by the slums have pollution problems and a main task is not to worsen them during the life of the shelters/houses.

  14. Understanding invasion history and predicting invasive niches using genetic sequencing technology in Australia: case studies from Cucurbitaceae and Boraginaceae.

    Science.gov (United States)

    Shaik, Razia S; Zhu, Xiaocheng; Clements, David R; Weston, Leslie A

    2016-01-01

    Part of the challenge in dealing with invasive plant species is that they seldom represent a uniform, static entity. Often, an accurate understanding of the history of plant introduction and knowledge of the real levels of genetic diversity present in species and populations of importance is lacking. Currently, the role of genetic diversity in promoting the successful establishment of invasive plants is not well defined. Genetic profiling of invasive plants should enhance our understanding of the dynamics of colonization in the invaded range. Recent advances in DNA sequencing technology have greatly facilitated the rapid and complete assessment of plant population genetics. Here, we apply our current understanding of the genetics and ecophysiology of plant invasions to recent work on Australian plant invaders from the Cucurbitaceae and Boraginaceae. The Cucurbitaceae study showed that both prickly paddy melon ( Cucumis myriocarpus ) and camel melon ( Citrullus lanatus ) were represented by only a single genotype in Australia, implying that each was probably introduced as a single introduction event. In contrast, a third invasive melon, Citrullus colocynthis , possessed a moderate level of genetic diversity in Australia and was potentially introduced to the continent at least twice. The Boraginaceae study demonstrated the value of comparing two similar congeneric species; one, Echium plantagineum , is highly invasive and genetically diverse, whereas the other, Echium vulgare , exhibits less genetic diversity and occupies a more limited ecological niche. Sequence analysis provided precise identification of invasive plant species, as well as information on genetic diversity and phylogeographic history. Improved sequencing technologies will continue to allow greater resolution of genetic relationships among invasive plant populations, thereby potentially improving our ability to predict the impact of these relationships upon future spread and better manage invaders

  15. Knowledge management impact of information technology Web 2.0/3.0. The case study of agent software technology usability in knowledge management system

    Science.gov (United States)

    Sołtysik-Piorunkiewicz, Anna

    2015-02-01

    How we can measure the impact of internet technology Web 2.0/3.0 for knowledge management? How we can use the Web 2.0/3.0 technologies for generating, evaluating, sharing, organizing knowledge in knowledge-based organization? How we can evaluate it from user-centered perspective? Article aims to provide a method for evaluate the usability of web technologies to support knowledge management in knowledge-based organizations of the various stages of the cycle knowledge management, taking into account: generating knowledge, evaluating knowledge, sharing knowledge, etc. for the modern Internet technologies based on the example of agent technologies. The method focuses on five areas of evaluation: GUI, functional structure, the way of content publication, organizational aspect, technological aspect. The method is based on the proposed indicators relating respectively to assess specific areas of evaluation, taking into account the individual characteristics of the scoring. Each of the features identified in the evaluation is judged first point wise, then this score is subject to verification and clarification by means of appropriate indicators of a given feature. The article proposes appropriate indicators to measure the impact of Web 2.0/3.0 technologies for knowledge management and verification them in an example of agent technology usability in knowledge management system.

  16. An application of multiattribute decision analysis to the Space Station Freedom program. Case study: Automation and robotics technology evaluation

    Science.gov (United States)

    Smith, Jeffrey H.; Levin, Richard R.; Carpenter, Elisabeth J.

    1990-01-01

    The results are described of an application of multiattribute analysis to the evaluation of high leverage prototyping technologies in the automation and robotics (A and R) areas that might contribute to the Space Station (SS) Freedom baseline design. An implication is that high leverage prototyping is beneficial to the SS Freedom Program as a means for transferring technology from the advanced development program to the baseline program. The process also highlights the tradeoffs to be made between subsidizing high value, low risk technology development versus high value, high risk technology developments. Twenty one A and R Technology tasks spanning a diverse array of technical concepts were evaluated using multiattribute decision analysis. Because of large uncertainties associated with characterizing the technologies, the methodology was modified to incorporate uncertainty. Eight attributes affected the rankings: initial cost, operation cost, crew productivity, safety, resource requirements, growth potential, and spinoff potential. The four attributes of initial cost, operations cost, crew productivity, and safety affected the rankings the most.

  17. Using Multiple Big Datasets and Machine Learning to Produce a New Global Particulate Dataset: A Technology Challenge Case Study

    Science.gov (United States)

    Lary, D. J.

    2013-12-01

    A BigData case study is described where multiple datasets from several satellites, high-resolution global meteorological data, social media and in-situ observations are combined using machine learning on a distributed cluster using an automated workflow. The global particulate dataset is relevant to global public health studies and would not be possible to produce without the use of the multiple big datasets, in-situ data and machine learning.To greatly reduce the development time and enhance the functionality a high level language capable of parallel processing has been used (Matlab). A key consideration for the system is high speed access due to the large data volume, persistence of the large data volumes and a precise process time scheduling capability.

  18. Implications of the information and communication technologies (ICT in the socialization of hearing-impaired persons. A case study: Zaragoza

    Directory of Open Access Journals (Sweden)

    Milagros Mayor Pérez

    2015-06-01

    Full Text Available Access to ICT is an important issue in contemporary societies, especially in vulnerable groups. From a case study of hearing impaired people living in Zaragoza, we study the assumption of ICT as a resource for socializing as well as the opinions and asses on them. In general, members of this group recognize the value and importance of ICT to information, communication and socialization. There are differences in their access between deaf persons with knowing of sign language or without it. Trends such as the increased use of smartphones replacing computers or valuation of certain risks or dangers associated ICT are identified. The domain in the use of ICT is conditioned by variables such as knowing of sign language, the age and condition of digital native.

  19. A case study about the Colombian Observatory of Science and Technology: between context relevant and internationally comparable indicators

    Energy Technology Data Exchange (ETDEWEB)

    Salazar, M.; Crespi, G.

    2016-07-01

    In very few countries around the world there are observatories for the design and production of science, technology and innovation (STI) indicators; mainly government organizations in charge of STI funding or national statistical agencies are the ones in charge of these activities. The purpose of this study is to assess the evolution and the results of the Colombian Observatory of Science and Technology (OCyT by its name in Spanish). The main objective is to explore if the Colombian model for the production of STI has been successful, if it is sustainable and what key institutional factors should be taken into consideration previously to replicate this experience in other contexts. The OCyT was created because there was a clear need, mainly within Colciencias’ policy makers and managers, to have regular and reliable indicators supporting the design and evaluation of STI policies Even if Colciencias has this responsibility, it chose to create an independent institution and innovated regarding the organizational arrangement not a subsidiary agency. As a not for profit organization and a public private partnership certainly the sustainability of the Observatory relies on the one hand, on the support provided by its associates (mainly Colciencias) and, on the other hand, on project funding. The issue at stake is if the OCyT should remain mainly as an indicator producer (its main goal and what it is paid for) or evolves into a research organization (knowledge producer), a consultant (service provider), or a combination of all. How to maintain a balance between national needs and international standards? Indicators should help policy makers to design, monitor and evaluate policies, programs and instruments, and in that sense indicators should be customized to their necessities. In addition, indicators are also used to make international comparisons, therefore the need to adopt international standards and guidelines. (Author)

  20. Comparison of Thermal Models for Ground-Mounted South-Facing Photovoltaic Technologies: A Practical Case Study

    Directory of Open Access Journals (Sweden)

    Henrik Zsiborács

    2018-05-01

    Full Text Available This paper examines the thermal properties of free-standing, ground-installed, south-facing crystalline and amorphous silicon photovoltaic modules, the remaining energy and the energy generation of the modules, in ideal and actual summer weather conditions. This work studies the algorithms in other studies used to describe the thermal processes occurring on the surface of photovoltaic modules. Using accurate devices and real, measured data, the deviations and the inaccuracies of theoretical approaches are investigated. The emphasis of the present study is to improve the simulation accuracy of the total emitted long-wave radiation at the module surface and to show the appropriate overall convection coefficient values for ground-mounted south-facing photovoltaic technologies. The innovative aspect of the present paper is an improved model resulting from an improved convective heat transfer and net long-wave radiation calculation. As a result of this research, algorithms describing the energy fluxes were developed. These algorithms have a 1–3% better accuracy of the net long-wave radiation calculations at the module surface. The rate of net energy exchange by convection at the module surface could be improved by 10–12% compared to the previous literature.

  1. Phytoremediation, a sustainable remediation technology? Conclusions from a case study. I: Energy production and carbon dioxide abatement

    International Nuclear Information System (INIS)

    Witters, N.; Mendelsohn, R.O.; Van Slycken, S.; Weyens, N.; Schreurs, E.; Meers, E.; Tack, F.; Carleer, R.; Vangronsveld, J.

    2012-01-01

    This study examines the renewable energy production of crops used for phytoremediation. Our analysis is based on a case study in the Campine region (Belgium and The Netherlands), where agricultural soils are diffusely contaminated with cadmium, lead, and zinc, with an enhanced risk for uptake of these metals in crops and leaching to the groundwater. However, the area has such a large extent (700 km 2 ) that conventional remediation is not applicable. Cultivation of crops for energy purposes on such land offers the opportunity to come up with an approach that efficiently uses contaminated agricultural land and that can be beneficial for both farmer and society. Performing a Life Cycle Analysis (LCA), we examined the energy and CO 2 abatement potential of willow (Salix spp.), silage maize (Zea mays L.), and rapeseed (Brassica napus L.) originating from contaminated land. Taking into account the marginal impact of the metals in the biomass on the energy conversion efficiency and on the potential use of the biomass and its rest products after conversion, digestion of silage maize with combustion of the contaminated digestate shows the best energetic and CO 2 abating perspectives. The replacement of cokes based electricity by willow is more efficient in CO 2 abatement than willow used in a Combined Heat and Power (CHP) unit, despite lower net energy production in the former option. Willow reaches the same energy production and same CO 2 abatement per hectare per year as silage maize when its biomass yield is respectively 13 and 8.7 Mg dm ha −1 y −1 . -- Highlights: ► We study the energy potential of Salix, Zea mays and Brassica after phytoremediation. ► The case study contains agricultural soils that are contaminated with cadmium. ► We include the impact of metals on energy conversion efficiency and rest product use. ► Higher biomass yields for Salix would make it energetically competitive with Z. mays.

  2. A framework for technological learning in the supply chain: A case study on CdTe photovoltaics

    International Nuclear Information System (INIS)

    Bergesen, Joseph D.; Suh, Sangwon

    2016-01-01

    Highlights: • A framework for technological learning in the supply chain is proposed. • This framework separates learning effects on value added and intermediate inputs. • Supply-chain learning can project both changing environmental impacts and costs. • Learning upstream in the supply chain can influence observed learning rates. • An example for CdTe photovoltaics illustrates how this framework can be implemented. - Abstract: Accounting for technological changes and innovation is important when assessing the implications of rapidly-developing greenhouse gas (GHG) mitigation technologies. Technological learning curves have been commonly used as a tool to understand technological change as a function of cumulative production. Traditional learning curve approaches, however, do not distinguish the direct and upstream, supply chain technological changes by which cost reductions are achieved. While recent advances in learning curves have focused on distinguishing the different physical and economic drivers of learning, forecasted technological changes have not been applied to estimate the potential changes in the environmental performance of a technology. This article illustrates how distinguishing the different effects of technological learning throughout the supply chain can help assess the changing costs, environmental impacts and natural resource implications of technologies as they develop. We propose a mathematical framework to distinguish the effects of learning on the direct inputs to a technology from the effects of learning on value added, and we incorporate those effects throughout the supply chain of a technology using a life cycle assessment (LCA) framework. An example for cadmium telluride (CdTe) photovoltaics (PV) illustrates how the proposed framework can be implemented. Results show that that life cycle GHG emissions can decrease at least 40% and costs can decrease at least 50% as cumulative production of CdTe reaches 100 GW. Technological

  3. Technology Development as a Normative Practice: A Meaning-Based Approach to Learning About Values in Engineering-Damming as a Case Study.

    Science.gov (United States)

    Nia, Mahdi G; Harandi, Mehdi F; de Vries, Marc J

    2017-11-10

    Engineering, as a complex and multidimensional practice of technology development, has long been a source of ethical concerns. These concerns have been approached from various perspectives. There are ongoing debates in the literature of the philosophy of engineering/technology about how to organize an optimized view of the values entailed in technology development processes. However, these debates deliver little in the way of a concrete rationale or framework that could comprehensively describe different types of engineering values and their multi-aspect interrelations in real engineering practices. Approaching engineering values from a meaning-based perspective, as in this paper, can be a reliable method of tackling such a controversial problem. This paper therefore proposes that technology development be considered a systemic normative practice and attempts to provide a comprehensive view of various built-in values, their different origins and features, and a way of prioritizing them in real engineering processes. Studying two cases of the Zayandeh Rood Dam and the Abbasi Dam will lead to practical insights into how to understand norms in technology development and incorporate them into engineering practice.

  4. Study on the Evolvement of Technology Development and Energy Efficiency—A Case Study of the Past 30 Years of Development in Shanghai

    Directory of Open Access Journals (Sweden)

    William X. Wei

    2016-05-01

    Full Text Available Previous research in regional energy efficiency by using macro statistical data has demonstrated that technology development could improve regional energy efficiency. Since the start of reform and opening up in 1978, China has mainly adopted energy import and foreign direct investment to promote economic growth. At the same time, the country has also increased the input of technology and R&D to prompt technological reformation and imported technology absorption. However, there is limited research on the relationship between technology development and energy efficiency. Using the grounded theory method, the authors of this paper study the relationship between technology input-output and energy utilization efficiency in Shanghai over the past 30 years. They conclude that although the tactics of technology import and foreign direct investment can improve energy efficiency in the initial stages of modern industrialization, they cannot improve it continuously. In the more advanced stages of modern industrialization, the improvement of energy efficiency relies not only on increased R&D investment but also on R&D investment structure optimization and independent technological innovation.

  5. Project management case studies

    CERN Document Server

    Kerzner, Harold R

    2013-01-01

    A new edition of the most popular book of project management case studies, expanded to include more than 100 cases plus a ""super case"" on the Iridium Project Case studies are an important part of project management education and training. This Fourth Edition of Harold Kerzner''s Project Management Case Studies features a number of new cases covering value measurement in project management. Also included is the well-received ""super case,"" which covers all aspects of project management and may be used as a capstone for a course. This new edition:Contains 100-plus case studies drawn from re

  6. Effects of Information Technologies, Department Characteristics and Individual Roles on Improving Knowledge Sharing Visibility: A Qualitative Case Study

    Science.gov (United States)

    Zhang, Xi; Vogel, Douglas R.; Zhou, Zhongyun

    2012-01-01

    Knowledge sharing visibility (KSV) is a critical environmental factor which can reduce social loafing in knowledge sharing (KS). This is especially true in ICT [information and communication technology]-based KS in learning organisations. As such, it is imperative that we better understand how to design technology enabled knowledge management…

  7. Literacy Integration of Technological Pedagogical Content Knowledge (TPACK) in Elementary Schools: A Case Study of Collaborative Leadership

    Science.gov (United States)

    Mason, Charlene A.

    2016-01-01

    Integration of educational technology in the context of e-books has experienced slow implementation in elementary schools, specifically in early literacy instruction. Technological pedagogical content knowledge (TPACK) is a framework for metacognitive reflection on how the learning of subject matter can be facilitated through the use of…

  8. The Influence of Organizational Subculture on Information Technology Project Success in the Healthcare Sector: A Qualitative, Multi-Case Study

    Science.gov (United States)

    Mallet, Richard Kofi

    2014-01-01

    Healthcare providers face high demands for technology based healthcare services due to global population increases and adapting information technology (IT) to achieve quality patient care. IT has become center stage in the operations and management of healthcare organizations. IT requirements emerge from the visions, values, and beliefs of…

  9. Learning What Works in Educational Technology with a Case Study of EDUSTAR. Policy Memo 2016-01

    Science.gov (United States)

    Chatterji, Aaron K.; Jones, Benjamin F.

    2016-01-01

    Despite much fanfare, new technologies have yet to fundamentally advance student outcomes in K-12 schools or other educational settings. We believe that the system that supports the development and dissemination of educational technology tools is falling short. The key missing ingredient is rigorous evaluation. No one knows what works and for…

  10. Linking Data Choices and Context Specificity in Life Cycle Assessment of Waste Treatment Technologies: A Landfill Case Study

    DEFF Research Database (Denmark)

    Henriksen, Trine; Astrup, Thomas Fruergaard; Damgaard, Anders

    2017-01-01

    To generate meaningful results, life cycle assessments (LCAs) require accurate technology data that are consistent with the goal and scope of the analysis. While literature data are available for many products and processes, finding representative data for highly site-specific technologies, such as...

  11. Holocaust and strategic bombing: case studies in the psychology, organization, and technology of mass killing in the twentieth century

    Energy Technology Data Exchange (ETDEWEB)

    Markusen, E.R.

    1986-01-01

    After preliminary discussion of the unprecedented scale of mass killing in the twentieth century, the threat of nuclear war, and the widespread neglect of these issues, the literature on two major types of government sanctioned mass killing is reviewed; genocide, in which a government slaughters its own citizens or subjects, and total war, in which two or more governments slaughter each other's civilian citizens or subjects. This literature review reaches two basic conclusions: (1) there is considerable inconsistency and ambiguity among definitions of genocide and total war; and (2) there is a controversy regarding how distinct or similar the two forms of mass killing actually are. A comparative historical analysis was undertaken in which the Nazi Holocaust was selected as an example of genocide, and the Allied strategic bombing campaigns during World War II were selected to exemplify total war. The two cases are compared in terms of a conceptual framework of five hypothesized facilitating factors. On the basis of this comparative analysis, four or the five hypothesized facilitating factors are found to have played important roles in both cases. The findings of the study are discussed, and their implications for the threat of nuclear holocaust are explored.

  12. Case Study Research Methodology

    Directory of Open Access Journals (Sweden)

    Mark Widdowson

    2011-01-01

    Full Text Available Commenting on the lack of case studies published in modern psychotherapy publications, the author reviews the strengths of case study methodology and responds to common criticisms, before providing a summary of types of case studies including clinical, experimental and naturalistic. Suggestions are included for developing systematic case studies and brief descriptions are given of a range of research resources relating to outcome and process measures. Examples of a pragmatic case study design and a hermeneutic single-case efficacy design are given and the paper concludes with some ethical considerations and an exhortation to the TA community to engage more widely in case study research.

  13. Emerging Technologies Integrating Technology into Study Abroad

    Science.gov (United States)

    Godwin-Jones, Robert

    2016-01-01

    "Ready access to travel and to technology-enhanced social networking (e.g., Facebook or Skype) has changed the nature of study abroad to the point where today's experiences are fundamentally different from those of earlier eras" (Kinginger, 2013a, p. 345). In addition to more travel options and greater technology availability, study…

  14. Factors Affecting Acceptance of Hospital Information Systems Based on Extended Technology Acceptance Model: A Case Study in Three Paraclinical Departments.

    Science.gov (United States)

    Nadri, Hamed; Rahimi, Bahlol; Lotfnezhad Afshar, Hadi; Samadbeik, Mahnaz; Garavand, Ali

    2018-04-01

     Regardless of the acceptance of users, information and communication systems can be considered as a health intervention designed to improve the care delivered to patients. This study aimed to determine the adoption and use of the extended Technology Acceptance Model (TAM2) by the users of hospital information system (HIS) in paraclinical departments including laboratory, radiology, and nutrition and to investigate the key factors of adoption and use of these systems.  A standard questionnaire was used to collect the data from nearly 253 users of these systems in paraclinical departments of eight university hospitals in two different cities of Iran. A total of 202 questionnaires including valid responses were used in this study (105 in Urmia and 97 in Khorramabad). The data were processed using LISREL and SPSS software and statistical analysis technique was based on the structural equation modeling (SEM).  It was found that the original TAM constructs had a significant impact on the staffs' behavioral intention to adopt HIS in paraclinical departments. The results of this study indicated that cognitive instrumental processes (job relevance, output quality, result demonstrability, and perceived ease of use), except for result demonstrability, were significant predictors of intention to use, whereas the result revealed no significant relationship between social influence processes (subjective norm, voluntariness, and image) and the users' behavioral intention to use the system.  The results confirmed that several factors in the TAM2 that were important in previous studies were not significant in paraclinical departments and in government-owned hospitals. The users' behavior factors are essential for successful usage of the system and should be considered. It provides valuable information for hospital system providers and policy makers in understanding the adoption challenges as well as practical guidance for the successful implementation of information

  15. Real-Time Prediction of Gamers Behavior Using Variable Order Markov and Big Data Technology: A Case of Study

    Directory of Open Access Journals (Sweden)

    Alejandro Baldominos Gómez

    2016-03-01

    Full Text Available This paper presents the results and conclusions found when predicting the behavior of gamers in commercial videogames datasets. In particular, it uses Variable-Order Markov (VOM to build a probabilistic model that is able to use the historic behavior of gamers and to infer what will be their next actions. Being able to predict with accuracy the next user’s actions can be of special interest to learn from the behavior of gamers, to make them more engaged and to reduce churn rate. In order to support a big volume and velocity of data, the system is built on top of the Hadoop ecosystem, using HBase for real-time processing; and the prediction tool is provided as a service (SaaS and accessible through a RESTful API. The prediction system is evaluated using a case of study with two commercial videogames, attaining promising results with high prediction accuracies.

  16. E-Science technologies in a workflow for personalized medicine using cancer screening as a case study.

    Science.gov (United States)

    Spjuth, Ola; Karlsson, Andreas; Clements, Mark; Humphreys, Keith; Ivansson, Emma; Dowling, Jim; Eklund, Martin; Jauhiainen, Alexandra; Czene, Kamila; Grönberg, Henrik; Sparén, Pär; Wiklund, Fredrik; Cheddad, Abbas; Pálsdóttir, Þorgerður; Rantalainen, Mattias; Abrahamsson, Linda; Laure, Erwin; Litton, Jan-Eric; Palmgren, Juni

    2017-09-01

    We provide an e-Science perspective on the workflow from risk factor discovery and classification of disease to evaluation of personalized intervention programs. As case studies, we use personalized prostate and breast cancer screenings. We describe an e-Science initiative in Sweden, e-Science for Cancer Prevention and Control (eCPC), which supports biomarker discovery and offers decision support for personalized intervention strategies. The generic eCPC contribution is a workflow with 4 nodes applied iteratively, and the concept of e-Science signifies systematic use of tools from the mathematical, statistical, data, and computer sciences. The eCPC workflow is illustrated through 2 case studies. For prostate cancer, an in-house personalized screening tool, the Stockholm-3 model (S3M), is presented as an alternative to prostate-specific antigen testing alone. S3M is evaluated in a trial setting and plans for rollout in the population are discussed. For breast cancer, new biomarkers based on breast density and molecular profiles are developed and the US multicenter Women Informed to Screen Depending on Measures (WISDOM) trial is referred to for evaluation. While current eCPC data management uses a traditional data warehouse model, we discuss eCPC-developed features of a coherent data integration platform. E-Science tools are a key part of an evidence-based process for personalized medicine. This paper provides a structured workflow from data and models to evaluation of new personalized intervention strategies. The importance of multidisciplinary collaboration is emphasized. Importantly, the generic concepts of the suggested eCPC workflow are transferrable to other disease domains, although each disease will require tailored solutions. © The Author 2017. Published by Oxford University Press on behalf of the American Medical Informatics Association.

  17. Environmental quality assessment of reservoirs impacted by Hg from chlor-alkali technologies: case study of a recovery.

    Science.gov (United States)

    Le Faucheur, Séverine; Vasiliu, Dan; Catianis, Irina; Zazu, Mariana; Dranguet, Perrine; Beauvais-Flück, Rebecca; Loizeau, Jean-Luc; Cosio, Claudia; Ungureanu, Costin; Ungureanu, Viorel Gheorghe; Slaveykova, Vera I

    2016-11-01

    Mercury (Hg) pollution legacy of chlor-alkali plants will be an important issue in the next decades with the planned phase out of Hg-based electrodes by 2025 within the Minamata convention. In such a context, the present study aimed to examine the extent of Hg contamination in the reservoirs surrounding the Oltchim plant and to evaluate the possible improvement of the environmental quality since the closure of its chlor-alkali unit. This plant is the largest chlor-alkali plant in Romania, which partly switched to Hg-free technology in 1999 and definitely stopped the use of Hg electrolysis in May 2012. Total Hg (THg) and methylmercury (CH 3 Hg) concentrations were found to decrease in the surface waters and sediments of the reservoirs receiving the effluents of the chlor-alkali platform since the closure of Hg units. Hence, calculated risk quotients (RQ) indicated no adverse effect of Hg for aquatic organisms from the ambient water exposure. RQ of Hg in sediments were mostly all higher than 1, showing important risks for benthic organisms. However, ecotoxicity testing of water and sediments suggest possible impact of other contaminants and their mixtures. Hg hotspots were found in soils around the platform with RQ values much higher than 1. Finally, THg and CH 3 Hg concentrations in fish were below the food safety limit set by the WHO, which contrasts with previous measurements made in 2007 revealing that 92 % of the studied fish were of high risk of consumption. Discontinuing the use of Hg electrodes greatly improved the surrounding environment of chlor-alkali plants within the following years and led to the decrease environmental exposure to Hg through fish consumption. However, sediment and soil still remained highly contaminated and problematic for the river reservoir management. The results of this ecological risk assessment study have important implications for the evaluation of the benefits as well as limits of the Minamata Convention implementation.

  18. Secure metropolitan network and the management of branches in the technological infrastructure:Case study GADM Babahoyo City

    Directory of Open Access Journals (Sweden)

    Joffre Vicente León Acurio

    2016-12-01

    Full Text Available This study aims to identify the nonexistent network to the general system of data communication that currently has the GADM (Autonomous Government Decentralized Municipal of Babahoyo located in the province of Los Rios in order to develop a logical design of a metropolitan network that can support new technologies and protocols ensuring the information conveyed between branches of GADM of Babahoyo, besides providing the institution of a compatible platform with the requirements of the e-Government (eGovernment. This research allowed to collect information through instruments such as interviews, meetings and literature review also visits took place at the premises of GADM Babahoyo, reviewing aspects of securities in telecommunications under the ISO / IEC 27002: 2013 citing reference the control objective Management network security. Identification, analysis and design of a proposed network infrastructure is made, allowing communication of the various units that are in distant places. It is concluded that the implementation of a system of networks throughout the municipal entity is considered a solution to the problem and generate many benefits.

  19. Using mobile technology to optimize disease surveillance and healthcare delivery at mass gatherings: a case study from India's Kumbh Mela.

    Science.gov (United States)

    Kazi, Dhruv S; Greenough, P Gregg; Madhok, Rishi; Heerboth, Aaron; Shaikh, Ahmed; Leaning, Jennifer; Balsari, Satchit

    2017-09-01

    Planning for mass gatherings often includes temporary healthcare systems to address the needs of attendees. However, paper-based record keeping has traditionally precluded the timely application of collected clinical data for epidemic surveillance or optimization of healthcare delivery. We evaluated the feasibility of harnessing ubiquitous mobile technologies for conducting disease surveillance and monitoring resource utilization at the Allahabad Kumbh Mela in India, a 55-day festival attended by over 70 million people. We developed an inexpensive, tablet-based customized disease surveillance system with real-time analytic capabilities, and piloted it at five field hospitals. The system captured 49 131 outpatient encounters over the 3-week study period. The most common presenting complaints were musculoskeletal pain (19%), fever (17%), cough (17%), coryza (16%) and diarrhoea (5%). The majority of patients received at least one prescription. The most common prescriptions were for antimicrobials, acetaminophen and non-steroidal anti-inflammatory drugs. There was great inter-site variability in caseload with the busiest hospital seeing 650% more patients than the least busy hospital, despite identical staffing. Mobile-based health information solutions developed with a focus on user-centred design can be successfully deployed at mass gatherings in resource-scarce settings to optimize care delivery by providing real-time access to field data. © The Author 2016. Published by Oxford University Press on behalf of Faculty of Public Health.

  20. Philippine case study: comparison of health impacts, costs and benefits of different generating technologies using IAEA's tools/methodologies

    International Nuclear Information System (INIS)

    Mundo, Mary Rose Q.; Arriola, Herminio

    2000-01-01

    The comparison of three electricity generating options were considered: coal-fired thermal power plant without flue gas desulfurization (FGD), coal-fired thermal power plant with FGD and combined cycle power plant with 300 MW generating capacity each. The system expansion for both the nuclear and non-nuclear options show an increasing share in the installed capacity of coal fired plants. Considering the high ash content and sulfur emission of coal-fired power plants, this plant type was assessed further in terms of health and environmental effects using the IAEA's computer tools such as QUERI, RUWM and DAM. Since all coal-fired power plants in the country have likewise not been equipped with FGD, another option studied is that of coal plant using FGD, with the objective of eliminating excess pollutants, which was assumed to have 90% removal efficiency. In view of this forecast on coal plants there is an ever-increasing need for the use of new technologies to be used in order to decrease health impacts of the use of coal as fuel. Thus, based on the analysis of three alternatives, the use of coal-fired power plants equipped with flue gas desulfurization (FGD) should be seriously considered. (Author)

  1. Risk analysis and technology assessment in support of technology development: Putting responsible innovation in practice in a case study for nanotechnology.

    Science.gov (United States)

    van Wezel, Annemarie P; van Lente, Harro; van de Sandt, Johannes Jm; Bouwmeester, Hans; Vandeberg, Rens Lj; Sips, Adrienne Jam

    2018-01-01

    Governments invest in "key enabling technologies," such as nanotechnology, to solve societal challenges and boost the economy. At the same time, governmental agencies demand risk reduction to prohibit any often unknown adverse effects, and industrial parties demand smart approaches to reduce uncertainties. Responsible research and innovation (RRI) is therefore a central theme in policy making. Risk analysis and technology assessment, together referred to as "RATA," can provide a basis to assess human, environmental, and societal risks of new technological developments during the various stages of technological development. This assessment can help both governmental authorities and innovative industry to move forward in a sustainable manner. Here we describe the developed procedures and products and our experiences to bring RATA in practice within a large Dutch nanotechnology consortium. This is an example of how to put responsible innovation in practice as an integrated part of a research program, how to increase awareness of RATA, and how to help technology developers perform and use RATA. Integr Environ Assess Manag 2018;14:9-16. © 2017 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals, Inc. on behalf of Society of Environmental Toxicology & Chemistry (SETAC). © 2017 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals, Inc. on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

  2. Novel, low-cost alternative technologies to tackle practical, industrial conundrums – a case study of batteries

    Directory of Open Access Journals (Sweden)

    Chan Victor K. Y.

    2016-01-01

    Full Text Available Whereas batteries in comparison with most other means of energy storage are more environmentally friendly and economical in their operation, they are beset by low energy replenishment rates, low energy storage density, high capital cost of themselves, and high capital cost of energy replenishment infrastructures. Mainly based on ergonomics, this paper proposes a novel, low-cost alternative technology to practically and industrially make these weaknesses irrelevant to some extent without calling for revolutionary technological breakthroughs in material science, batteries’ microstructures, or battery manufacturing technologies. The technology takes advantage of modularization of battery systems, prioritization of charging and discharging of battery module(s according to ease of unloading and/or loading the battery module(s and/or ease of loading replacement battery module(s of the battery module(s.

  3. An exploration of the impact of information technology on China’s hotel industry : A case study of Hanting Inn

    OpenAIRE

    Liu, Ying

    2013-01-01

    With the rapid development of information technology, digital technology and e-commerce are playing an important role in the tourism industry, and modern information systems represent a major future direction for tourism development. Given this situation, the hotel industry in the 21st century is likely to undergo great change in the face of a common trend. Based on this trend, network marketing has become an important marketing tool for the hotel industry. Network marketing uses the Int...

  4. Designing a performance appraisal system based on balanced scorecard for improving productivity: Case study in Semnan technology and science park

    Directory of Open Access Journals (Sweden)

    Mohammad Hemati

    2012-08-01

    Full Text Available Today, organizations for holding and improving their competing merit use performance measurement for evaluation, control, supervision and improvement of their trading processes. Medium and small companies in technology and science parks are very useful in economic revivification and technology development. Technology and science parks have provided necessary consultations, information, suitable equipments, and services for developing technology unites and prepare them for independent presence in industry. One of the necessary elements for the success and improvement of performance in these companies is to establish and implement balanced scorecard, which can be used to reach desired goals, strategies and to improve performance. In this article, we use a structured method for calculating efficiency of four perspectives of balanced scorecard. Statistical society of this research was Semnan technology and Science Park and seven experts are selected for answering questions of the survey. We also complete questionnaire and determine index and relative importance of all indices. For developing strategic goals of Semnan technology and science park according to four perspectives of balanced score card (finance, growth and learning, internal process, six meetings were hold and finally all crisis macro goals index were identified and they were analyzed for evaluating performance.

  5. A case study of pediatric asthma alerts from the beacon community program in cincinnati: technology is just the first step.

    Science.gov (United States)

    Trudnak, Tara; Mansour, Mona; Mandel, Keith; Sauers, Hadley; Pandzik, Gerry; Donisi, Carl; Fairbrother, Gerry

    2014-01-01

    The Beacon Community in Cincinnati, Ohio was an innovative, community-wide initiative to use technology to transform care. One important feature was the development of regional alerts to notify practices when patients were hospitalized or seen in the emergency department. The purpose of this paper is to describe the way in which technology engages the improvement process, and to describe the early stages of learning how to use technology to enhance quality improvement. We interviewed key Beacon leaders as well as providers and office staff in selected practices. We also collected preliminary data from practices that reflected handling of alerts, including the number of asthma related alerts received and followed up. Regional alerts, supplied by the community-wide health information exchange, were a significant addition to the quality improvement effort in that they enabled practices to identify and follow up with additional children at risk. An important finding was the substantial effort at the practice level to integrate technology into ongoing patient care. Developing the technology for community wide alerts represented a significant endeavor in the Cincinnati Beacon Community. However, the technology was just the first step. Despite extra effort and time required on the part of individual practices, they reported that the value of having alerts was high. Hospital and ED visits represent some of the most costly aspects of care, and an efficient process for intervening with children using these costly services was seen as of significant value.

  6. Using Web 2.0 Technologies for Collaborative Learning in Distance Education—Case Studies from an  Australian University

    Directory of Open Access Journals (Sweden)

    David Lloyd

    2012-03-01

    Full Text Available This paper explores the use of Web 2.0 technologies for collaborative learning in a higher education context. A review of the literature exploring the strengths and weaknesses of Web 2.0 technology is presented, and a conceptual model of a Web 2.0 community of inquiry is introduced. Two Australian case studies are described, with an ex-poste evaluation of the use of Web 2.0 tools. Conclusions are drawn as to the potential for the use of Web 2.0 tools for collaborative e-learning in higher education. In particular, design and integration of Web 2.0 tools should be closely related to curriculum intent and pedagogical requirements, care must be taken to provide clear guidance on both expected student activity and learning expectations, and there is a clear need to develop, support and encourage strong interaction both between teachers and students, and amongst the students themselves.

  7. Using Web Crawler Technology for Geo-Events Analysis: A Case Study of the Huangyan Island Incident

    Directory of Open Access Journals (Sweden)

    Hao Hu

    2014-04-01

    Full Text Available Social networking and network socialization provide abundant text information and social relationships into our daily lives. Making full use of these data in the big data era is of great significance for us to better understand the changing world and the information-based society. Though politics have been integrally involved in the hyperlinked world issues since the 1990s, the text analysis and data visualization of geo-events faced the bottleneck of traditional manual analysis. Though automatic assembly of different geospatial web and distributed geospatial information systems utilizing service chaining have been explored and built recently, the data mining and information collection are not comprehensive enough because of the sensibility, complexity, relativity, timeliness, and unexpected characteristics of political events. Based on the framework of Heritrix and the analysis of web-based text, word frequency, sentiment tendency, and dissemination path of the Huangyan Island incident were studied by using web crawler technology and the text analysis. The results indicate that tag cloud, frequency map, attitudes pie, individual mention ratios, and dissemination flow graph, based on the crawled information and data processing not only highlight the characteristics of geo-event itself, but also implicate many interesting phenomenon and deep-seated problems behind it, such as related topics, theme vocabularies, subject contents, hot countries, event bodies, opinion leaders, high-frequency vocabularies, information sources, semantic structure, propagation paths, distribution of different attitudes, and regional difference of net citizens’ response in the Huangyan Island incident. Furthermore, the text analysis of network information with the help of focused web crawler is able to express the time-space relationship of crawled information and the information characteristic of semantic network to the geo-events. Therefore, it is a useful tool to

  8. Carbon footprint assessment of recycling technologies for rare earth elements: A case study of recycling yttrium and europium from phosphor.

    Science.gov (United States)

    Hu, Allen H; Kuo, Chien-Hung; Huang, Lance H; Su, Chao-Chin

    2017-02-01

    Rare earth elements are key raw materials in high-technology industries. Mining activities and manufacturing processes of such industries have caused considerable environmental impacts, such as soil erosion, vegetation destruction, and various forms of pollution. Sustaining the long-term supply of rare earth elements is difficult because of the global shortage of rare earth resources. The diminishing supply of rare earth elements has attracted considerable concern because many industrialized countries regarded such elements as important strategic resources for economic growth. This study aims to explore the carbon footprints of yttrium and europium recovery techniques from phosphor. Two extraction recovery methods, namely, acid extraction and solvent extraction, were selected for the analysis and comparison of carbon footprints. The two following functional units were used: (1) the same phosphor amounts for specific Y and Eu recovery concentrations, and (2) the same phosphor amounts for extraction. For acid extraction method, two acidic solutions (H 2 SO 4 and HCl) were used at two different temperatures (60 and 90°C). For solvent extraction method, acid leaching was performed followed by ionic liquid extraction. Carbon footprints from acid and solvent extraction methods were estimated to be 10.1 and 10.6kgCO 2 eq, respectively. Comparison of the carbon emissions of the two extraction methods shows that the solvent extraction method has significantly higher extraction efficiency, even though acid extraction method has a lower carbon footprint. These results may be used to develop strategies for life cycle management of rare earth resources to realize sustainable usage. Copyright © 2016 Elsevier Ltd. All rights reserved.

  9. What are the key contextual factors when preparing for successful implementation of assistive living technology in primary elderly care? A case study from Norway.

    Science.gov (United States)

    Gjestsen, Martha Therese; Wiig, Siri; Testad, Ingelin

    2017-09-07

    To identify contextual factors at different organisational levels to guide the implementation of an assistive living technology intervention in Norwegian primary home care. A single embedded case study design was carried out in an urban municipality in Western Norway to get an overview of key contextual factors from the municipality's perspective. The data collection was based on a triangulation of methods involving document analysis, semi-structured individual interviews and focus group interviews to get a broad insight when preparing for an intervention. Data were collected on three levels of the healthcare system: (1) national policy documents and regulations (macro), (2) five individual interviews with senior managers and municipal strategy documents (meso) and (3) two focus group interviews with nurses and nurse managers in direct patient care (micro). The Model for Understanding Success in Quality framework was used as a guide in the data analysis. The main contextual factors identified were external motivators and project sponsorship (macro level); leadership, workforce focus and maturity (meso level);and motivation to change and maturity (micro level). Strategies developed in policy documents affected upper management in the municipality, but healthcare personnel at the micro level were not so familiar with strategies and emphasis on assistive living technologies. Healthcare personnel in our study were motivated to use technological solutions, but lack of data infrastructure and resource availability hindered this. Aligning interests across multiple stakeholders remain a challenge when planning for an assistive living technology intervention in primary care. In the studied municipality, integration of technological solutions into healthcare services was more a vision than a reality because of a low level of organisational readiness. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No

  10. XML technologies for the Omaha System: a data model, a Java tool and several case studies supporting home healthcare.

    Science.gov (United States)

    Vittorini, Pierpaolo; Tarquinio, Antonietta; di Orio, Ferdinando

    2009-03-01

    The eXtensible markup language (XML) is a metalanguage which is useful to represent and exchange data between heterogeneous systems. XML may enable healthcare practitioners to document, monitor, evaluate, and archive medical information and services into distributed computer environments. Therefore, the most recent proposals on electronic health records (EHRs) are usually based on XML documents. Since none of the existing nomenclatures were specifically developed for use in automated clinical information systems, but were adapted to such use, numerous current EHRs are organized as a sequence of events, each represented through codes taken from international classification systems. In nursing, a hierarchically organized problem-solving approach is followed, which hardly couples with the sequential organization of such EHRs. Therefore, the paper presents an XML data model for the Omaha System taxonomy, which is one of the most important international nomenclatures used in the home healthcare nursing context. Such a data model represents the formal definition of EHRs specifically developed for nursing practice. Furthermore, the paper delineates a Java application prototype which is able to manage such documents, shows the possibility to transform such documents into readable web pages, and reports several case studies, one currently managed by the home care service of a Health Center in Central Italy.

  11. Learning by cases in food technology

    DEFF Research Database (Denmark)

    Løje, Hanne

    2012-01-01

    The purpose of this paper is to evaluate the use of the method learning by cases for teaching food technology students at the technical university of Denmark (DTU) and to clarify if the method can be used to improve the motivation and make the students more active and thereby be more in control...... of their own learning process, to feel more secure and less frustrated. The applying of the learning by cases method at the food technology course can make the students to learn in a significantly way, where they will be more actively involved in the learning process than previous. The work with real life...... cases with engineering topics, can develop the students knowledge and understanding, which gives the students a more conceptual understanding of engineering tasks, and can improve their skills to analyze and deal with complex situations and furthermore to be more confident with the course curriculum....

  12. Abstracts of Remediation Case Studies, Volume 9

    Science.gov (United States)

    This report, published by the Federal Remediation Technologies Roundtable (FRTR), is a collection of recently published abstracts summarizing 13 cost and performance case studies on the use of remediation technologies at contaminated sites.

  13. Low cost monitoring from space using Landsat TM time series and open source technologies: the case study of Iguazu park

    Science.gov (United States)

    Nole, Gabriele; Lasaponara, Rosa

    2015-04-01

    Up to nowadays, satellite data have become increasingly available, thus offering a low cost or even free of charge unique tool, with a great potential for operational monitoring of vegetation cover, quantitative assessment of urban expansion and urban sprawl, as well as for monitoring of land use changes and soil consumption. This growing observational capacity has also highlighted the need for research efforts aimed at exploring the potential offered by data processing methods and algorithms, in order to exploit as much as possible this invaluable space-based data source. The work herein presented concerns an application study on the monitoring of vegetation cover and urban sprawl conducted with the use of satellite Landsat TM data. The selected test site is the Iguazu park highly significant, being it one of the most threatened global conservation priorities (http://whc.unesco.org/en/list/303/). In order to produce synthetic maps of the investigated areas to monitor the status of vegetation and ongoing subtle changes, satellite Landsat TM data images were classified using two automatic classifiers, Maximum Likelihood (MLC) and Support Vector Machines (SVMs) applied by changing setting parameters, with the aim to compare their respective performances in terms of robustness, speed and accuracy. All process steps have been developed integrating Geographical Information System and Remote Sensing, and adopting free and open source software. Results pointed out that the SVM classifier with RBF kernel was generally the best choice (with accuracy higher than 90%) among all the configurations compared, and the use of multiple bands globally improves classification. One of the critical elements found in the case of monitoring of urban area expansion is given by the presence of urban garden mixed with urban fabric. The use of different configurations for the SVMs, i.e. different kernels and values of the setting parameters, allowed us to calibrate the classifier also to

  14. Science-Technology-Society literacy in college non-majors biology: Comparing problem/case studies based learning and traditional expository methods of instruction

    Science.gov (United States)

    Peters, John S.

    This study used a multiple response model (MRM) on selected items from the Views on Science-Technology-Society (VOSTS) survey to examine science-technology-society (STS) literacy among college non-science majors' taught using Problem/Case Studies Based Learning (PBL/CSBL) and traditional expository methods of instruction. An initial pilot investigation of 15 VOSTS items produced a valid and reliable scoring model which can be used to quantitatively assess student literacy on a variety of STS topics deemed important for informed civic engagement in science related social and environmental issues. The new scoring model allows for the use of parametric inferential statistics to test hypotheses about factors influencing STS literacy. The follow-up cross-institutional study comparing teaching methods employed Hierarchical Linear Modeling (HLM) to model the efficiency and equitability of instructional methods on STS literacy. A cluster analysis was also used to compare pre and post course patterns of student views on the set of positions expressed within VOSTS items. HLM analysis revealed significantly higher instructional efficiency in the PBL/CSBL study group for 4 of the 35 STS attitude indices (characterization of media vs. school science; tentativeness of scientific models; cultural influences on scientific research), and more equitable effects of traditional instruction on one attitude index (interdependence of science and technology). Cluster analysis revealed generally stable patterns of pre to post course views across study groups, but also revealed possible teaching method effects on the relationship between the views expressed within VOSTS items with respect to (1) interdependency of science and technology; (2) anti-technology; (3) socioscientific decision-making; (4) scientific/technological solutions to environmental problems; (5) usefulness of school vs. media characterizations of science; (6) social constructivist vs. objectivist views of theories; (7

  15. Water pollution control technology and strategy for river-lake systems: a case study in Gehu Lake and Taige Canal.

    Science.gov (United States)

    Zhang, Yimin; Zhang, Yongchun; Gao, Yuexiang; Zhang, Houhu; Cao, Jianying; Cai, Jinbang; Kong, Xiangji

    2011-07-01

    The Taoge water system is located in the upstream of Taihu Lake basin and is characterized by its multi-connected rivers and lakes. In this paper, current analyses of hydrology, hydrodynamics and water pollution of Gehu Lake and Taige Canal are presented. Several technologies are proposed for pollution prevention and control, and water environmental protection in the Taihu Lake basin. These included water pollution control integration technology for the water systems of Gehu Lake, Taige Canal and Caoqiao River. Additionally, river-lake water quality and quantity regulation technology, ecological restoration technology for polluted and degraded water bodies, and water environmental integration management and optimization strategies were also examined. The main objectives of these strategies are to: (a) improve environmental quality of relative water bodies, prevent pollutants from entering Gehu Lake and Taige Canal, and ensure that the clean water after the pre-treatment through Gehu Lake is not polluted before entering the Taihu Lake through Taige Canal; (b) stably and efficiently intercept and decrease the pollution load entering the lake through enhancing the river outlet ecological system structure function and water self-purifying capacity, and (c) designate Gehu Lake as a regulation system for water quality and water quantity in the Taoge water system and thus guarantee the improvement of the water quality of the inflow into Taihu Lake.

  16. Technology Enhanced Learning: Virtual Realities; Concrete Results--Case Study on the Impact of TEL on Learning

    Science.gov (United States)

    Al-Khatib, Hayat

    2011-01-01

    Technology Enhanced Learning is a feature of 21st century education. Innovations in ICT have provided unbound access to information in support of the learning process (APTEL, 2010; Allert et al, 2002; Baldry et al, 2006; Frustenberg et al, 2001; Sarkis, 2010). LMS has been extensively put to use in universities and educational institutions to…

  17. Information Technology Infusion Case Study: Integrating Google Earth(Trademark) into the A-Train Data Depot

    Science.gov (United States)

    Smith, Peter; Kempler, Steven; Leptoukh, Gregory; Chen, Aijun

    2010-01-01

    This poster paper represents the NASA funded project that was to employ the latest three dimensional visualization technology to explore and provide direct data access to heterogeneous A-Train datasets. Google Earth (tm) provides foundation for organizing, visualizing, publishing and synergizing Earth science data .

  18. Successful Information Technology Outsourcing: A Case Study on How a U.S.-Based Company Achieves Success

    Science.gov (United States)

    Daluisio, Stephen C.

    2014-01-01

    In the late 1980s, the Eastman Kodak company initiated what would become one of the biggest trends in information technology (IT): outsourcing. IT outsourcing (ITO) allows a company to focus on the services that will differentiate it from its competitors and farm out nondifferentiating services. ITO has grown from the initial landmark effort at…

  19. Integrating Information and Communication Technology in English Language Teaching: A Case Study of Selected Junior Secondary Schools in Botswana

    Science.gov (United States)

    Mafuraga, Mbizo; Moremi, Mbiganyi

    2017-01-01

    The paper discusses how Information and Communication Technology (ICT) could be integrated in the teaching of English Language in Botswana Junior Secondary Schools. It does so by exploring opportunities and challenges faced by teachers of English Language and the students they teach. Fifty five (55) teachers in eleven (11) Junior Secondary Schools…

  20. The Impact of Organizational Conditions and User Perceptions on Adoption of a Technological Innovation: An Instrumental Case Study

    Science.gov (United States)

    Schwedler, Jennifer Green

    2017-01-01

    Enterprise software implementations are subject to high failure rates. Organizations of higher education can be particularly resistant to technology implementations as they can be perceived as eroding the traditions of the institution. The California State University (CSU) system is moving into a new phase of data-driven accountability for…

  1. Public R and D and commercialization of energy-efficient technology: A case study of Japanese projects

    Energy Technology Data Exchange (ETDEWEB)

    Kimura, Osamu, E-mail: o-kimura@criepi.denken.or.j [Central Research Institute of Electric Power Industry, 2-11-1 Iwatokita, Komae City, 201-8511 Tokyo (Japan)

    2010-11-15

    Are public R and D programs really effective in developing innovative technologies? How many technologies developed in these programs have been successfully commercialized? What are the key factors for successful commercialization and diffusion in the market? This paper tries to answer these questions by examining the Japanese experience of public R and D in demand-side energy efficiency, focusing on two major projects conducted in the 1980s and 1990s. It is found that of the 34 technologies developed in the two projects, only seven have been commercialized so far, four of those seven have only a very limited number of installations, and only one has a growing market. The results show that, while public R and D investments have a high risk of failure, they can bring new technologies to the market after a certain lead time. In addition, several factors resulting in the success or failure of commercialization/diffusion are identified, such as long-term R and D support by the government, a marketing strategy to respond to and influence market demand, and combination of R and D and deployment policy.

  2. Public R and D and commercialization of energy-efficient technology. A case study of Japanese projects

    Energy Technology Data Exchange (ETDEWEB)

    Kimura, Osamu [Central Research Institute of Electric Power Industry, 2-11-1 Iwatokita, Komae City, 201-8511 Tokyo (Japan)

    2010-11-15

    Are public R and D programs really effective in developing innovative technologies? How many technologies developed in these programs have been successfully commercialized? What are the key factors for successful commercialization and diffusion in the market? This paper tries to answer these questions by examining the Japanese experience of public R and D in demand-side energy efficiency, focusing on two major projects conducted in the 1980s and 1990s. It is found that of the 34 technologies developed in the two projects, only seven have been commercialized so far, four of those seven have only a very limited number of installations, and only one has a growing market. The results show that, while public R and D investments have a high risk of failure, they can bring new technologies to the market after a certain lead time. In addition, several factors resulting in the success or failure of commercialization/diffusion are identified, such as long-term R and D support by the government, a marketing strategy to respond to and influence market demand, and combination of R and D and deployment policy. (author)

  3. Deriving Requirements for Pervasive Well-Being Technology From Work Stress and Intervention Theory : Framework and Case Study

    NARCIS (Netherlands)

    Koldijk, S.; Kraaij, W.; Neerincx, M.A.

    2016-01-01

    BACKGROUND: Stress in office environments is a big concern, often leading to burn-out. New technologies are emerging, such as easily available sensors, contextual reasoning, and electronic coaching (e-coaching) apps. In the Smart Reasoning for Well-being at Home and at Work (SWELL) project, we

  4. Children, Technology, and Instruction: A Case Study of Elementary School Children Using an Online Public Access Catalog (OPAC).

    Science.gov (United States)

    Solomon, Paul

    1994-01-01

    Examines elementary school students' use of an online public access catalog to investigate the interaction between children, technology, curriculum, instruction, and learning. Highlights include patterns of successes and breakdowns; search strategies; instructional approaches and childrens' interests; structure of interaction; search terms; and…

  5. Public R and D and commercialization of energy-efficient technology: A case study of Japanese projects

    International Nuclear Information System (INIS)

    Kimura, Osamu

    2010-01-01

    Are public R and D programs really effective in developing innovative technologies? How many technologies developed in these programs have been successfully commercialized? What are the key factors for successful commercialization and diffusion in the market? This paper tries to answer these questions by examining the Japanese experience of public R and D in demand-side energy efficiency, focusing on two major projects conducted in the 1980s and 1990s. It is found that of the 34 technologies developed in the two projects, only seven have been commercialized so far, four of those seven have only a very limited number of installations, and only one has a growing market. The results show that, while public R and D investments have a high risk of failure, they can bring new technologies to the market after a certain lead time. In addition, several factors resulting in the success or failure of commercialization/diffusion are identified, such as long-term R and D support by the government, a marketing strategy to respond to and influence market demand, and combination of R and D and deployment policy.

  6. An Assessment of the Drivers and Barriers for the Deployment of Urban Phosphorus Recovery Technologies: A Case Study of The Netherlands

    Directory of Open Access Journals (Sweden)

    Marissa A. de Boer

    2018-05-01

    Full Text Available Phosphorus (P, being one of the building blocks of life, is essential for a multitude of applications, primarily for fertilizer usage. Sustainable management of phosphorus is becoming increasingly important in light of adverse environmental effects, ambiguous reserves, increasing global demand and unilateral dependence. Recovery of phosphorus from the biggest loss stream, communal wastewater, has the potential to tackle each of these problems. The implementation of phosphorus recovery technologies at wastewater treatment plants is not widespread, despite prolonged efforts primarily done by researchers over the past decade. This study aimed to assess the drivers and barriers of a phosphorus recovery transition. Several key stakeholders involved in this transition in The Netherlands were interviewed. The Netherlands was taken as a case study, since it serves as a frontrunner in the implementation of phosphorus recovery technologies. This study shows that the main barriers from the point of view of fertilizer companies are the different and unclear characteristics of the phosphorus recovery product struvite compared to common fertilizers. Moreover, the end-of-waste status of struvite is mentioned as a prominent barrier for a phosphorus transition, since it hinders free market trade. Many water boards indicate that the main barrier is the high investment cost with an uncertain return on investment for onsite struvite recovery processes. The specified main driver for water boards for onsite struvite phosphorus recovery technology is the reduction of maintenance costs, and for phosphorus recovery from sewage sludge ash, the low organic pollutant in the P recovery product.

  7. Swedish District Nurses' experiences on the use of information and communication technology for supporting people with serious chronic illness living at home--a case study.

    Science.gov (United States)

    Nilsson, Carina; Skär, Lisa; Söderberg, Siv

    2010-06-01

    The aim of this case study was to describe two District Nurses' (DN) experiences of using information and communication technology (ICT) to communicate with chronically ill people in their homes. An electronic messaging program via computers and mobile phones with an Internet connection was used, enabling DNs and the ill people to exchange messages to and from anywhere. The program comprised different virtual rooms, and communication was via text messages. The DNs in this study used the program two to four times each week from November 2003 to March 2004. Semi-structured interviews were performed before, during and after the implementation of the new technology and were analysed using thematic content analysis. The results showed that the DNs felt that the technology increased accessibility to nursing care through a more direct communication with the ill person meaning that a more trusting relationship could be created. The DNs also experienced that the use of ICT saved working time. This study indicates that the use of ICT for communication allowed the DN to better support a chronically ill person at home leading to improved home nursing care. This method of communication cannot replace physical presence, but can be seen as a complement to nursing care at home.

  8. Twenty-first century learning in schools: A case study of New Technology High School in Napa, California.

    Science.gov (United States)

    Pearlman, Bob

    2006-01-01

    The most pertinent question concerning teaching and learning in the twenty-first century is not what knowledge and skills students need--that laundry list was identified over a decade ago--but rather how to foster twenty-first century learning. What curricula, experiences, assessments, environments, and technology best support twenty-first century learning? New Technology High School (NTHS) in Napa, California, is one example of a successful twenty-first century school. In this chapter, the author describes the components of this exemplary high school, illustrating an environment that will cultivate twenty-first century student learning. New Technology High School began by defining eight learning outcomes, aligned with the standards of the Partnership for 21st Century Skills; to graduate, students demonstrate mastery of these outcomes through an online portfolio. To help students achieve the outcomes, NTHS employs project- and problem-based learning. Whereas in traditional classrooms students work alone on short-term assignments that do not lend themselves to deep understanding, the project-based learning approach has students working in teams on long-term, in-depth, rigorous projects. Students' work is supported by the school's workplace-like environment and effectiv use of technology. Meaningful assessment is essential to project-based learning; students receive continuous feedback, helping them become self-directed learners. In fact, NTHS uses outcome-based grading through which students constantly know how they are performing on the twenty-first century outcomes. Research has shown that NTHS graduates are better prepared for postsecondary education, careers, and citizenship than their peers from other schools. To facilitate twenty-first century learning, all schools need to rethink their approach to teaching and learning. New Technology High School is one way to do so.

  9. Air pollution impact on aerosol variability over mega cities using remote sensing technology: case study, Cairo, Egypt

    International Nuclear Information System (INIS)

    El-Askary, H.

    2006-01-01

    Air pollution problems over mega cities differ greatly and are influenced by a number of factors, including topography, demography, meteorology, level and rate of industrialization and socioeconomic development. Cairo is considered a key city for economy, education, politics industry and technology in the Middle East.Increasing business and industrial activities in the city accompanied by shortage of the institutional capabilities for monitoring and control, in addition to environmental impact negligence that prevails over many of the production sectors, have contributed to excessive air pollution problems that have reached the level of crisis. A contributor to this problem is natural and man made effects such as dust and aerosols uptakes. Such pollution episodes are observed during the months of October showing the so called B lack Cloud . Such pollution leads to wide variability of aerosols behavior over Cairo. Hence, aerosol related parameters obtained from satellite measurements have been studied here. Aerosol optical depth (AOD) behavior showed a dual maxima nature in each year from 2000 till 2005 during the months of (April, May) and October confirming dust and air pollution events, respectively. Such behavior is confirmed by the high negative correlation with the aerosol fine mode fraction (FMF) reaching -0.75. FMF product confirms a higher value during the months of October representing the Black Cloud episodes due to fine particles contribution in these events rather than during the dust events. However, lower values are observed in the last two years due to the new control measures enforced by the government for the environment protection. The difference between the AOD and FMF showed a higher contribution of the fine grains during the Black Cloud events rather than coarser grains during dust events as expected. Among the sources known to contribute to the black cloud formation is the fire burns over the Nile Delta region during the months of September

  10. A technology-enhanced patient case workshop.

    Science.gov (United States)

    Pai, Vinita B; Kelley, Katherine A; Bellebaum, Katherine L

    2009-08-28

    To assess the impact of technology-based changes on student learning, skill development, and satisfaction in a patient-case workshop. A new workshop format for a course was adopted over a 3-year period. Students received and completed patient cases and obtained immediate performance feedback in class instead of preparing the case prior to class and waiting for instructors to grade and return their cases. The cases were designed and accessed via an online course management system. Student satisfaction was measured using end-of-course surveys. The impact of the technology-based changes on student learning, problem-solving, and critical-thinking skills was measured and compared between the 2 different course formats by assessing changes in examination responses. Three advantages to the new format were reported: real-life format in terms of time constraint for responses, a team learning environment, and expedient grading and feedback. Students overwhelmingly agreed that the new format should be continued. Students' examination scores improved significantly under the new format. The change in delivery of patient-case workshops to an online, real-time system was well accepted and resulted in enhanced learning, critical thinking, and problem-solving skills.

  11. Case study: technology initiative led to advanced lead optimization screening processes at Bristol-Myers Squibb, 2004-2009.

    Science.gov (United States)

    Zhang, Litao; Cvijic, Mary Ellen; Lippy, Jonathan; Myslik, James; Brenner, Stephen L; Binnie, Alastair; Houston, John G

    2012-07-01

    In this paper, we review the key solutions that enabled evolution of the lead optimization screening support process at Bristol-Myers Squibb (BMS) between 2004 and 2009. During this time, technology infrastructure investment and scientific expertise integration laid the foundations to build and tailor lead optimization screening support models across all therapeutic groups at BMS. Together, harnessing advanced screening technology platforms and expanding panel screening strategy led to a paradigm shift at BMS in supporting lead optimization screening capability. Parallel SAR and structure liability relationship (SLR) screening approaches were first and broadly introduced to empower more-rapid and -informed decisions about chemical synthesis strategy and to broaden options for identifying high-quality drug candidates during lead optimization. Copyright © 2012 Elsevier Ltd. All rights reserved.

  12. Re-evaluating Science and Technology trough the lens of Arts and Graphic Design. A case study in La Spezia.

    Science.gov (United States)

    Locritani, Marina; Stroobant, Mascha; Talamoni, Roberta; Merlino, Silvia; Guccinelli, Giacomo; Benvenuti, Lucrezia; Zatta, Consuelo; Stricker, Federica; Zappa, Franco; Sgherri, Matteo

    2016-04-01

    and imprinted in the minds of the public thanks to the support of speed painting and visual scribing, which made it more understandable, interesting and direct. 2. Edutainment activities. Two games have been build up for children aged between 7 and 13 years as a part of the European Researchers' Night activities (2011 and 2014-2015): a great board game with questions and drawings related to marine ecology and environmental protection and a memory game through which children can learn notions on Earthquakes, Volcanoes and Environment. Children's learning is facilitated if bound by game, and in this case images are more direct than words. 3. Surveys. A graphic questionnaire has been created in order to understand science perception and/or stereotypes in children who do not yet know how to read and write. In all these cases the relationship between researchers and artists has been extremely constructive and fruitful: researchers had to simplify their object of study in order to be able to disclose concepts that have been then translated into a simple and easy language.

  13. THE CONTRIBUTION OF IT AS A TOOL IN BUSINESS MANAGEMENT: A CASE STUDY OF A TECHNOLOGY COMPANY LOCATED IN THE MUNICIPALITY OF DOM PEDRITO / RS

    Directory of Open Access Journals (Sweden)

    Fernanda da Silveira Duarte

    2015-01-01

    Full Text Available Information technology is a necessity for all modern businesses and can become a major competitive advantage, as their use is aligned with the business strategy of the company. Modern technologies of information and communication can help to improve the quality of various business aspects. For demonstrating this issue, bibliographic, exploratory and descriptive research on the subject was made, and also a case study on IT management in the company ZapShop Informática located in the city of Dom Pedrito / RS where it was possible to assess the evolution of the organization and its changes through graphics indicators in a more accurately way. The aim of this study was to carry on theoretical studies on the subject to deepen knowledge in the area, exposing the importance of IT as a support tool in the decision process, perform qualitative and quantitative analysis on the company indicators and demonstrate the results achieved by the company from the implementation of an Information System. According to the study, it’s possible to see that IT can be side by side with the management of organizations, because it provides information for the decision making and strategic business management, automates routine tasks, assists the internal and external control of processes, enhances the ability to recognize a problem in advance and breaking barriers of time and location, for example. It is also observed that prior to the purchase of equipment with advanced technology, we must invest in the company's employees, developing their skills and integrating them fully to the work process, delivering training and education on new technologies in the organization process.

  14. A cost-benefit analysis of a pellet boiler with electrostatic precipitator versus conventional biomass technology: A case study of an institutional boiler in Syracuse, New York.

    Science.gov (United States)

    Levy, Jonathan I; Biton, Leiran; Hopke, Philip K; Zhang, K Max; Rector, Lisa

    2017-07-01

    Biomass facilities have received increasing attention as a strategy to increase the use of renewable fuels and decrease greenhouse gas emissions from the electric generation and heating sectors, but these facilities can potentially increase local air pollution and associated health effects. Comparing the economic costs and public health benefits of alternative biomass fuel, heating technology, and pollution control technology options provides decision-makers with the necessary information to make optimal choices in a given location. For a case study of a combined heat and power biomass facility in Syracuse, New York, we used stack testing to estimate emissions of fine particulate matter (PM 2.5 ) for both the deployed technology (staged combustion pellet boiler with an electrostatic precipitator) and a conventional alternative (wood chip stoker boiler with a multicyclone). We used the atmospheric dispersion model AERMOD to calculate the contribution of either fuel-technology configuration to ambient primary PM 2.5 in a 10km×10km region surrounding the facility, and we quantified the incremental contribution to population mortality and morbidity. We assigned economic values to health outcomes and compared the health benefits of the lower-emitting technology with the incremental costs. In total, the incremental annualized cost of the lower-emitting pellet boiler was $190,000 greater, driven by a greater cost of the pellet fuel and pollution control technology, offset in part by reduced fuel storage costs. PM 2.5 emissions were a factor of 23 lower with the pellet boiler with electrostatic precipitator, with corresponding differences in contributions to ambient primary PM 2.5 concentrations. The monetary value of the public health benefits of selecting the pellet-fired boiler technology with electrostatic precipitator was $1.7 million annually, greatly exceeding the differential costs even when accounting for uncertainties. Our analyses also showed complex spatial

  15. Systematic instruction of assistive technology for cognition (ATC) in an employment setting following acquired brain injury: A single case, experimental study.

    Science.gov (United States)

    Powell, Laurie E; Glang, Ann; Pinkelman, Sarah; Albin, Richard; Harwick, Robin; Ettel, Deborah; Wild, Michelle R

    2015-01-01

    Assistive technology for cognition (ATC) can be an effective means of compensating for cognitive impairments following acquired brain injury. Systematic instruction is an evidence-based approach to training a variety of skills and strategies, including the use of ATC. This study experimentally evaluated systematic instruction applied to assistive technology for cognition (ATC) in a vocational setting. The study used a single-case, multiple-probe design across behaviors design. The participant was a 50-year old female with cognitive impairments following an acquired brain injury (ABI). As a part-time employee, she was systematically instructed on how to operate and routinely use selected applications (apps) on her iPod Touch to support three work-related skills: (a) recording/recalling the details of work assignments, (b) recording/recalling work-related meetings and conversations, and (c) recording/performing multi-step technology tasks. The experimental intervention was systematic instruction applied to ATC. The dependent measures were: (a) the use of ATC at work as measured by an ATC routine task analysis; and (b) recall of work-related tasks and information. Treatment effects were replicated across the three work-related skills and were maintained up to one year following the completion of intensive training across behaviors with periodic review (booster sessions). Systematic instruction is a critical component to teaching the routine use of ATC to compensate for cognitive impairments following ABI.

  16. THE USE OF CASE TECHNOLOGIES IN TEACHING STUDENTS

    Directory of Open Access Journals (Sweden)

    Yuliya M. Tsarapkina

    2015-01-01

    Full Text Available Аbstract. The aim of the article is to consider the possibilities of use of case technologies in educational process of the university; to prove the efficiency and perspectivity of the given method while training the future expertsprofessionalsMethods. Retrospective and abstract analyses of the scientific-theoretical and practical literature are used while describing the history of development of case-study technology and its didactic possibilities. Test materials are used as the measuring tool of dynamics of informative activity of students, changes of level of their knowledge and abilities in the process of skilled-experimental work.Results and scientific novelty. The way of formation of concept «case technology» is shown; examples of various approaches to understanding of the given method are given; author's experience of research of the given problem is described; stages of work with case technology are allocated. It is experimentally proved that case technologies not only help to fix subject knowledge, to find professional the competence, but also promote development of creative thinking, and form skills of behaviour in a group: abilities to operate in a team, to state and defend the point of view, to listen, to carry on dialogue, to ask questions, to operate with the knowledge, building logic schemes of the problem solution. Besides, during the training period using a case technology students study independent ways of knowledge acquisition which are necessary for the modern professional in constantly ever-changing economic and social realities.The case method reveals creative potential, learns to think and operate differently not only students, but also teachers. This method promotes democratisation of educational process, formation of teachers’ progressive thinking, raises motivation of pedagogical activity.Practical significance. The article provides conclusions and recommendations for the use of case technologies in the

  17. Library as a Partner in Co-Designing Learning Spaces: A Case Study at Tampere University of Technology, Finland

    Science.gov (United States)

    Tevaniemi, Johanna; Poutanen, Jenni; Lähdemäki, Riitta

    2015-01-01

    This article presents a case of co-designed temporary learning spaces at a Finnish academic library, together with the results of a user-survey. The experimental development of the multifunctional spaces offered an opportunity for the library to collaborate with its parent organisation thus broadening the role of the library. Hence, library can be…

  18. Status and Benefits of Renewable Energy Technologies in the Rural Areas of Ethiopia: A Case Study on Improved Cooking Stoves and Biogas Technologies

    Directory of Open Access Journals (Sweden)

    Yitayal Addis Alemayehu

    2015-07-01

    Full Text Available The majority of Ethiopia’s people (85% reside in rural areas, deriving their livelihood from agriculture. Ethiopia’s energy system is characterized mainly by biomass fuel supply, with households being the greatest energy consumers. The household sector takes up nearly 94 % of the total energy supplies. Access to energy resources and technologies in rural Ethiopia is highly constrained which makes the energy supply and consumption pattern of the country to show many elements of un-sustainability. The concern on cooking practices, household economics, health, forest and agricultural resource management, and global greenhouse gas emissions has emerged as a transformative opportunity to improve individual lives, livelihoods, and the global environment. More decentralized renewable energy projects could play an important role in mitigating traditional biomass fuel use. Improved cooking stove (ICS dissemination projects have been launched involving the private sector in the production and commercialization of the stoves. In doing so, about 3.7 million ICSs have been disseminated in the country so far which benefited stove users, producers and the total environment as about 30 million hectare of forest per year can be conserved. Conversion of animal waste to biogas energy to replace traditional fuel and use of the slurry as a fertilizer is the other current focus of the government of Ethiopia and installed more than 860 biogas digesters. The benefits obtained from these technologies are considerable and promising. However, the programs are not that much benefited the rural households where it had been intended to address. So, due attention should be given for those of the rural households in order to address the fuel wood crisis, environmental degradation and their health condition.

  19. Water resources protection today: end-of-pipe technology and cleaner production. Case study of the Czech Odra River watershed.

    Science.gov (United States)

    Chour, V

    2001-01-01

    This paper reports on integrated watershed-based protection and sustainable use of water resources to increase the effectiveness of water pollution abatement. The approach includes improvements in end-of-pipe waste-water treatment technologies and implementation of Cleaner Production (CP) principles and policies within the watershed. An example of the general effectiveness of this approach is illustrated by the Czech Odra River Cleaner Production Project where reductions in pollution were achieved with improved industrial production. The CP theme is worth considering as an important challenge for the IWA.

  20. 451 Case studies Cardiac

    African Journals Online (AJOL)

    Marinda

    Case Studies. 29 ... A case of a 26-year-old ASA I physical status male undergoing septoplasty had an abrupt ... myocardial infarction, severe hypertensive crisis, cerebral .... or no formal management is required in an ASA I patient.8 One.

  1. Promoting the Use of Online Social Technology as a Case-Based Learning Tool

    Science.gov (United States)

    Ractham, Peter; Chen, Charlie

    2013-01-01

    Social technology is proliferating and influencing different aspects of society. However, very few studies have examined the use of such a technology for a case-based learning pedagogy. This preliminary study investigates the use of social technology as a case-based learning tool to improve the effectiveness of case-based learning in the…

  2. The role of information and communication technology in the transformation of the healthcare business model: a case study of Slovenia.

    Science.gov (United States)

    Stanimirovic, Dalibor; Vintar, Mirko

    The Slovenian healthcare business model (BM) has largely failed to integrate information and communication technologies (ICT) into its operational context, instead maintaining its rigid structure and traditional 'way of doing business'wo managers of public clinics). Findings present a roadmap for the redefinition of BM elements and the transformation of the Slovenian healthcare BM. It includes the specific reconfiguration of BM actors and their interactions, and the application of advanced ICT solutions, which could facilitate more effective utilisation of healthcare resources and promote an improved delivery of healthcare services and products. The presented development approach and derived conceptual solution could be transferable to other countries with similar socio-economic characteristics and comparable healthcare systems, subject to certain adjustments and inclusion of national specifics.

  3. The roles of information technology in global chain supply: a multiple case study of multinational companies of China

    Science.gov (United States)

    He, Mao; Duan, Wanchun

    2007-12-01

    Nowadays many Chinese companies have being becoming more and more international. Therefore, these Chinese companies have to face global supply chains rather than the former domestic ones. The use of information technology (IT) is considered a prerequisite for the effective control of today's complex global supply chains. Based on empirical data from 10 multinational companies of China, this paper presents a classification of the ways in which companies use IT in SCM, and examines the drivers for these different utilization types. According to the findings of this research, the purposes of using of IT in SCM can be divided into 1) transaction processing, 2) supply chain planning and collaboration, and 3) order tracking and delivery coordination. The findings further suggest that the drivers between these three uses of IT in SCM differ.

  4. A study on organizational culture, structure and information technology as three KM enablers: A case study in five Iranian medical and healthcare research centers

    Directory of Open Access Journals (Sweden)

    Mahdi Iran-nejad-parizi

    2013-01-01

    Full Text Available This study investigates organizational structure, culture, and information technology as knowledge management (KM infrastructural capabilities, and compares their significance and status quo in five medical research centers in Tehran, Iran. Objectives of this research were pursued by employing two statistical methods, regression analysis and Friedman test. Included in the study were 135 people (researchers and support staff from five medical and healthcare research centers of Tehran. A survey questionnaire including 23 questions was utilized to examine organizational structure, culture and information technology indicators. And another 12 questions examined KM effectiveness. The Friedman test indicated that in terms of their status quo, the three studied KM enablers are at different conditions, with organizational culture having the best (mean rank=1.79 and IT the worst (mean rank=2.14 status. Moreover, it was revealed by regression analysis that organizational structure is believed to have the most significant impact (Beta= 0.397 on the effectiveness of knowledge management initiatives, while information technology gained the least perceived impact (Beta= 0.176.

  5. Compressed Air System Enhancement Increases Efficiency and Provides Energy Savings at a Circuit Board Manufacturer (Sanmina Plant, Oswego, New York): Office of Industrial Technologies (OIT) BestPractices Technical Case Study

    International Nuclear Information System (INIS)

    Wogsland, J.

    2001-01-01

    This case study is one in a series on industrial firms who are implementing energy efficient technologies and system improvements into their manufacturing processes. This case study documents the activities, savings, and lessons learned on the circuit board manufacturer (Sanmina Plant) project

  6. Technological capability assessment of suppliers to support product development: case study on a buses and coaches manufacturer

    Directory of Open Access Journals (Sweden)

    Lucas Comerlato

    2013-05-01

    Full Text Available Supply chain management has become a critical issue in the global collaboration scenario. Suppliers are not expected to provide just commodities or pre-defined components, but also collaborative engineering design solutions within the product development cycle. Thus, the selection criteria for defining supply partner go beyond the production and logistic capabilities, but must also include technical and engineering competence. This, in some sense, can be considered a common scenario of big companies, but is still challenging when dealing with SME´s. This work discusses how SME´s can be included in a supply chains taking in consideration a set of parameters to assess their technical competence related to product development collaboration. A set of eight parameters has been proposed to assess the engineering team competence, physical and technological structure and further legal responsibility. For each parameter values and weights were defined also. The assessment was applied to three companies that are suppliers of a buses and coaches manufacturer from Rio Grande do Sul, Brazil. The results show that even when dealing with objective parameters, the suppliers and costumer can have different perceptions about same issues.

  7. Web technology to support work processes in energy policy research - A case study with energy efficiency standards

    International Nuclear Information System (INIS)

    Benenson, Peter; McMahon, James E.; Brown, Stephen R.

    2002-01-01

    This paper focuses on a process to design and build a web-based system to assist staff in day-to-day management and contemporaneous documentation of their work. Other groups that want to use web technology to support their work could apply the approach presented here, but the design itself pertains to a particular set of issues in a unique context. Each user must apply the approach to identify their objectives and design a site to meet them. The main question that the Energy Efficiency Standards Group addressed was: ''How can we facilitate documentation of interim results and final products while conducting a complex, interdependent set of analyses by multiple authors under time pressures for delivering a final product?'' The approach to address this question includes categorization of the components of the work, discussions with staff, development of infrastructure support for documentation, implementation of the documentation process and integration with the workflow, and follow- up with staff. The search for a solution raised a number of issues such as the need for a thorough understanding of the work, consensus building by inclusion of key staff, and deliverable scheduling to allow for contemporaneous documentation. Documentation results vary among the product analyses, from extensive internal and external use to much slower adoption. Complaints include the length of the input forms and pressure from clients to deliver results. But with repeated demand for interim output, the need for thorough contemporaneous documentation still remains. Accordingly, as problems arise there is continued commitment among the staff to address them

  8. Information technology used in preparing the national reports on Species of Community Interest. Study case: Vipera ursinii in Pontic bioregion

    Directory of Open Access Journals (Sweden)

    TÖRÖK Zsolt Csaba

    2013-12-01

    Full Text Available In order to fulfill requirements related to the accession of Romanian to the European Union, several measures were taken in the field of nature protection, including enforcement in the country the provisions of the Council Directive 92/43/EEC. Beyond the establishing of the legal framework and designation of the Sites of Community Interest, there were carried out activities aiming to set-up a data-base planned to be used for generating the first national reports on the current status of the Species of Community Interest. In a pilot project there were up-loaded into the respective data-base information for at about 5% of the total number of the national reports. In the present paper there are provided details on the procedure used in case of Vipera ursinii from the Pontic (Black Sea biogeographical region. In the mentioned biogeographical region there are three areas inhabitat by natural populations of Vipera ursini. Consequently, in each of the respective areas there was selected a plot in case of which there were up-loaded into the data base details on on the location of the population, on the date of the investigation, on the size of the populations (both relativ data and quantitative information, on the habitats, treaths and information sources. Also, the resulted maps (in GIS having one of the layers with 10x10 km squares of the grid in ETRS89-LAEA 5210 projection include spatial information in a format compatible with the ones used for global analyses on the status of the species in the European Union.

  9. Assessing the public regulatory acceptability of deploying new cleanup technologies: A case study of the integrated demonstration for Remediation of Volatile Organic Compounds at Arid Sites

    International Nuclear Information System (INIS)

    McCabe, G.H.; Stein, S.L.

    1992-08-01

    The US Department of Energy (DOE) is funding several integrated demonstrations (IDs) around the United States in an effort to improve the pace and effectiveness of cleaning up its sites. The objective of these IDs is to demonstrate an array of innovative cleanup technologies that address the specific needs at a site and to provide deployable technologies to all DOE sites with similar environmental problems. This approach eliminates the need to redemonstrate these technologies at multiple sites, thereby minimizing technology development cost and schedule requirements. However, for an ID to be truly successful, the technologies must be technically sound, acceptable to the various interested or concerned individuals and groups who feel they have a stake in the case (often referred to as stakeholders), and acceptable to the regulators responsible for approving the technologies' deployment. As a result, the ID for Remediation of Volatile Organic Compounds at Arid Sites (VOC-Arid ID) has instituted a process for assessing public and regulatory acceptability of the technologies that it is developing. As part of this process, an information system has been developed that describes the innovative technologies being supported under the VOC-Arid ID. It also compares innovative technologies with the baseline technologies currently in use by environmental restoration personnel

  10. Evaluation of software and electronics technologies for the control of the E-ELT instruments: a case study

    International Nuclear Information System (INIS)

    Di Marcantonio, P.; Cirami, R.; Coretti, I.; Chiozzi, G.; Kiekebusch, M.

    2012-01-01

    In the scope of the evaluation of architecture and technologies for the control system of the E-ELT (European-Extremely Large Telescope) instruments, a collaboration has been set up between the Instrumentation and Control Group of the INAF-OATs and the ESO Directorate of Engineering. The first result of this collaboration is the design and implementation of a prototype of a small but representative control system for a kind of multi-object (optical) spectrograph. The electronics has been based on PLCs (Programmable Logical Controller) and Ethernet based field-buses from different vendors but using international standards like the IEC 61131-3 and PLCopen Motion Control. The baseline design for the control software follows the architecture of the VLT (Very Large Telescope) Instrumentation application framework but it has been implemented using the ACS (ALMA Common Software), an open source software framework developed for the ALMA project and based on CORBA middle-ware. The communication among the software components is based on two models: CORBA calls for command/reply using the client/server paradigm and CORBA notification channel for distributing the devices status using the publisher/subscriber paradigm. The communication with the PLCs is based on OPC UA, an international standard for the communication with industrial controllers. The results of this work will contribute to the definition of the architecture of the control system that will be provided to all consortia responsible for the actual implementation of the E-ELT instruments. This paper presents the prototype motivation, its architecture, design and implementation. (authors)

  11. Active elbow flexion is possible in C4 quadriplegia using hybrid assistive limb (HAL®) technology: A case study.

    Science.gov (United States)

    Shimizu, Yukiyo; Kadone, Hideki; Kubota, Shigeki; Ikumi, Akira; Abe, Tetsuya; Marushima, Aiki; Ueno, Tomoyuki; Endo, Ayumu; Kawamoto, Hiroaki; Saotome, Kousaku; Matsushita, Akira; Matsumura, Akira; Sankai, Yoshiyuki; Hada, Yasushi; Yamazaki, Masashi

    2017-07-01

    Patients with complete quadriplegia after high cervical spinal cord injury are fully dependent with activities of daily living. Assistive technology can improve their quality of life. We examined the use of a hybrid assistive limb for single joints (HAL-SJ) in a 19-year-old man with complete C4 quadriplegia due to chronic spinal cord injury to restore function of active elbow flexion. This is the first report on the use of the HAL-SJ in a patient with spinal cord injury. The HAL-SJ intervention for each elbow was administered in 10 sessions. Clinical assessment using surface EMG was conducted to evaluate muscle activity of the trapezius, biceps brachii, infraspinatus, and triceps brachii muscle before, and during the 2nd, 3rd, 6th, and 9th interventions. Surface electromyography (EMG) before intervention showed no contraction in the upper arms, but in the bilateral trapezius. The HAL-SJ used motion intention from the right trapezius for activation. After the 6th and 7th session, respectively, biceps EMG showed that voluntary contraction and right elbow flexion could be performed by motion intention from the right biceps. After the 10th session, voluntary bicep contraction was possible. HAL-SJ treatment on the left elbow was performed using the same protocol with a similar outcome. After completing treatment on both upper extremities, both biceps contracted voluntarily, and he could operate a standard wheelchair for a short distance independently. HAL-SJ intervention is feasible and effective in restoring elbow flexor function in a patient with C4 chronic spinal cord injury and complete quadriplegia.

  12. Student-Teachers' Competence and Attitude towards Information and Communication Technology: A Case Study in a Nigerian University

    OpenAIRE

    Yusuf, Modasiru O.; Balogun, Modupe R.

    2011-01-01

    The importance of ICT in empowering teachers and learners, and enhancing teaching and students’ achievement has been highlighted in several studies. Similarly, the digital divide between the developed and developing nations had been of a serious concern to educators. The paucity of studies on ICT integration in the developing nations needs to be addressed so as to ensure total integration of ICT in the school curriculum. This study examined empirically student-teachers’ competence and attitud...

  13. Energy Recovery Using Micro-Hydropower Technology in Water Supply Systems: The Case Study of the City of Fribourg

    Directory of Open Access Journals (Sweden)

    Irene Samora

    2016-08-01

    Full Text Available Water supply systems (WWSs are one of the main manmade water infrastructures presenting potential for micro-hydropower. Within urban networks, local decentralized micro-hydropower plants (MHPs may be inserted in the regional electricity grid or used for self-consumption at the local grid level. Nevertheless, such networks are complex and the quantification of the potential for micro-hydropower other than that achieved by replacing pressure reducing valves (PRVs is difficult. In this work, a methodology to quantify the potential for hydropower based on the excess energy in a network is proposed and applied to a real case. A constructive solution is presented based on the use of a novel micro-turbine for energy conversion, the five blade tubular propeller (5BTP. The location of the MHP within the network is defined with an optimization algorithm that maximizes the net present value after 20 years of operation. These concepts are tested for the WSS in the city of Fribourg, Switzerland. The proposed solution captures 10% of the city’s energy potential and represents an economic interest. The results confirm the location of PRVs as potential sites for energy recovery and stress the need for careful sensitivity analysis of the consumption. Finally, an expedited method is derived to estimate the costs and energy that one 5BTP can produce in a given network.

  14. [Case and studies].

    Science.gov (United States)

    Schubert, András

    2015-11-15

    Case studies and case reports form an important and ever growing part of scientific and scholarly literature. The paper deals with the share and citation rate of these publication types on different fields of research. In general, evidence seems to support the opinion that an excessive number of such publications may negatively influence the impact factor of the journal. In the literature of scientometrics, case studies (at least the presence of the term "case study" in the titles of the papers) have a moderate share, but their citation rate is practically equal to that of other publication types.

  15. Best Technology Practices of Conflict Resolution Specialists: A Case Study of Online Dispute Resolution at United States Universities

    Science.gov (United States)

    Law, Kimberli Marie

    2013-01-01

    The purpose of this study was to remedy the paucity of knowledge about higher education's conflict resolution practice of online dispute resolution by providing an in-depth description of mediator and instructor online practices. Telephone interviews were used as the primary data collection method. Eleven interview questions were relied upon to…

  16. Virtual Teams and E-Collaboration Technology: A Case Study Investigating the Dynamics of Virtual Team Communication

    Science.gov (United States)

    Mattison, Theresa

    2011-01-01

    The purpose of this study was to determine to what extent the use of e-collaboration tools when used as a primary channel of communication affected virtual team members' trust and motivation, in a spatially dispersed environment. Structured interviews were conducted with 18 project managers, who were responsible for leading virtual projects…

  17. Uses of Internet and Mobile Technology in Health Systems for the Elderly: A Case Study of Hong Kong

    OpenAIRE

    Sanches Lam; Winnie Chung

    2010-01-01

    To investigate the impact of training the elderly to use the Internet and mobile computer devices in order to become more active in their health care. This study utilized semi-structured interviews and surveys. Five themes emerged from the interviews that described participants' motivations and barriers they experienced when using the mobile devices and Internet. Survey data revealed that levels of computer anxiety decreased and levels of efficacy increasing after training. Conclusion: Traini...

  18. Soil and Water Conservation Prioritization Using Geospatial Technology – a Case Study of Part of Subarnarekha Basin, Jharkhand, India

    Directory of Open Access Journals (Sweden)

    Firoz Ahmad

    2017-08-01

    Full Text Available Changing patterns of land use and land cover have exploited the natural resources. Soil, water and forests are degraded, both quantitatively and qualitatively. Deforestation in recent years has led to changes in the environment and more of soil erosion and loss of potable water. In order to conserve and sustainably use soil and water, a watershed management approach is necessary. It helps in restoring water by increasing the infiltration and reducing the erosion of soil. Such measures should be propagated in rainfall deficit areas. The present study has attempted to study the upper watershed part of Subarnarekha basin in Jharkhand state of India. Remote sensing satellite data (Landsat 8 OLI/TIRS 2013 was used for delineation of the land use/land cover and vegetation index maps. Several thematic layers like slope, drainage and rainfall were integrated to achieve a priority area map using spatial multicriteria decision making. It delineated high medium and low priority areas within the watershed for soil and water conservation. The high priority area was 16.63% of the total study area. Further, the causes were analysed and conservation measures proposed.

  19. A Comprehensive Framework for Information Technology Governance and Localizing it for Automotive Industry of Iran (Case Study: ATLAS Automotive Holding

    Directory of Open Access Journals (Sweden)

    Mohammad Mosakhani

    2017-03-01

    Full Text Available Due to the absence of a comprehensive framework for IT governance, the main objective of the study is to identify all components of IT governance and present them in the form of a comprehensive IT governance framework .The localization of provided framework for the automotive industry is the secondary objective of the study. In this regard, the research questions are: what is the comprehensive framework of IT governance? What are the components and dimensions of a comprehensive framework of IT governance? What is the localized comprehensive framework of IT governance for the Iranian automotive industry? All researches on IT governance were investigated using meta-synthesis qualitative method and were limited to 96 selected articles by performing a meta-synthesis process. Then, the five categories, 19 concepts and 79 codes of IT governance were identified through detailed study of these articles. Then, a comprehensive framework of IT governance was presented. For localizing, a questionnaire designed based on the identified IT governance components, and distributed among the automotive industry experts. Statistical hypothesis testing of collected data led to the rejection of cross/functional job rotation component in the automotive industry. To demonstrate the applicability of the framework, the IT governance status of ATLAS holding company was evaluated based on the comprehensive framework that localized for automotive industry.

  20. Rational use of energy. Finnish technology cases

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-11-01

    This publication has been produced within the THERMIE B project `Interactive Promotion of Energy Technologies between Finland and Other EUCountries and to Estonia` (STR-0622-95-FI) as carried out for DG XVII of the European Commission. MOTIVA of Finntech Finnish Technology Ltd Oy has acted as the project co-ordinating body, with Ekono B.E., Ekono Energy Ltd and Friedemann and Johnson Consultants GmbH as partners. The main aim of the second phase of the project, as documented here, was to produce a publication in English on Finnish energy technologies, primarily in the building, industry and traffic sectors. The target distribution for this publication is primarily the EU countries through public and commercial information networks. During the work, the latest information on Finnish energy technologies has been collected, reviewed, screened and analysed in relation to the THERMIE programme. The following presentation consists of descriptions of case technologies; their background, technical aspects and energy saving potentials where applicable. The three RUE sectors; buildings, industry and traffic, are put forward in separate chapters. The building sector concentrates mostly in different control systems. New lighting and heating systems increase energy savings both in the large industrial sites and in private homes. In the industry sector new enhanced processes are introduced along with new products to increase energy efficiency. Traffic sector concentrates in traffic control and reducing exhaust gas emissions by new systems and programmes. The aim in Finland is to reduce exhaust gas emissions both by controlling the traffic efficiently and by developing fuels with lower emission levels. A lot is being done by educating the drivers and the public in efficient driving methods