WorldWideScience

Sample records for technologically conservative adapting

  1. Harvesting Adaptation to Biodiversity Conservation in Sawmill Industry: Technology Innovation and Monitoring Program

    Directory of Open Access Journals (Sweden)

    Guillermo J. Martínez Pastur

    2007-09-01

    Full Text Available Social demands related to native forest ecosystems are based on an efficient management, with a balance between conservation and timber production. This paper describes the industry adaptation to a biodiversity program with an alternative regeneration method. The proposed method leaves 30% of the timber-quality forest as aggregated retention and 15 m² ha-1 basal area as dispersed retention. While many costs increased considerably, the incomes also may increase by applying new management strategies and technology innovation. A monitoring program was established in the harvested stands to evaluate the ecological functionality of the applied regeneration system (forest structure, climate change, regeneration dynamics, habitat quality and abiotic cycles. The implementation of an innovated technology and monitoring program in the forest and industry determined a balance between economic values and biodiversity conservation.

  2. Energy conservation employing membrane-based technology

    International Nuclear Information System (INIS)

    Narayanan, C.M.

    1993-01-01

    Membranes based processes, if properly adapted to industrial processes have good potential with regard to optimisation and economisation of energy consumption. The specific benefits of MBT (membrane based technology) as an energy conservation methodology are highlighted. (author). 6 refs

  3. Energy conservation technologies

    Energy Technology Data Exchange (ETDEWEB)

    Courtright, H.A. [Electric Power Research Inst., Palo Alto, CA (United States)

    1993-12-31

    The conservation of energy through the efficiency improvement of existing end-uses and the development of new technologies to replace less efficient systems is an important component of the overall effort to reduce greenhouse gases which may contribute to global climate change. Even though uncertainties exist on the degree and causes of global warming, efficiency improvements in end-use applications remain in the best interest of utilities, their customers and society because efficiency improvements not only reduce environmental exposures but also contribute to industrial productivity, business cost reductions and consumer savings in energy costs.

  4. Technology transfer for adaptation

    Science.gov (United States)

    Biagini, Bonizella; Kuhl, Laura; Gallagher, Kelly Sims; Ortiz, Claudia

    2014-09-01

    Technology alone will not be able to solve adaptation challenges, but it is likely to play an important role. As a result of the role of technology in adaptation and the importance of international collaboration for climate change, technology transfer for adaptation is a critical but understudied issue. Through an analysis of Global Environment Facility-managed adaptation projects, we find there is significantly more technology transfer occurring in adaptation projects than might be expected given the pessimistic rhetoric surrounding technology transfer for adaptation. Most projects focused on demonstration and early deployment/niche formation for existing technologies rather than earlier stages of innovation, which is understandable considering the pilot nature of the projects. Key challenges for the transfer process, including technology selection and appropriateness under climate change, markets and access to technology, and diffusion strategies are discussed in more detail.

  5. Adaptation to heavy rainfall events: watershed-community planning of soil and water conservation technologies in Syria

    Science.gov (United States)

    Ziadat, Feras; Al-Wadaey, Ahmed; Masri, Zuhair; Sakai, Hirokazu

    2010-05-01

    The Fourth Assessment Report of the Intergovernmental Panel on Climate Change (IPCC) and other research, predict a significant future increase in the frequency and intensity of heavy rainfall events in many regions. This increase runoff and soil erosion, and reduce agricultural productivity, as well as increasing risks of flood damage to crops and infrastructure. Implementing adaptation measures and improved land management through erosion control and soil protection are among those that protect water and agriculture and limit their vulnerability. Soil erosion control practices are often based on long-term climatic averages. Special attention is needed to provide protection against average high-return frequency storms as well as severe storms with low-return frequency. Suitable and affordable soil conservation plans, coupled with an appropriate enabling environment, are needed. A watershed and community were selected in the mountainous area of North West Syria. The fields represent the non-tropical highland dry areas and dominated by olive orchards on steep slopes. Farmers were aware of resource degradation and productivity reduction, but lacked financial capital to implement the needed adaptation measures. A micro-credit system was established with the help of the UNDP Global Environment Facility - Small Grants Program (GEF-SGP) with small grants available for each farmer. Haphazard implementation on scattered fields proved inefficient in demonstrating obvious impact. Therefore, each watershed was classified into three erosion risk categories (high, moderate and low), derived from maps of flow accumulation, slope steepness, slope shape and land use. Using field survey of land ownership, the boundaries of 168 farms in the watersheds were mapped. Farmers' fields were classified using the erosion-risk map and considering the on-farm erosion hazard and the off-farm effect on other farmers' fields following the hillslope sequence. More than 60% of the farms were

  6. Conservation and adaptation to climate change.

    Science.gov (United States)

    Brooke, Cassandra

    2008-12-01

    The need to adapt to climate change has become increasingly apparent, and many believe the practice of biodiversity conservation will need to alter to face this challenge. Conservation organizations are eager to determine how they should adapt their practices to climate change. This involves asking the fundamental question of what adaptation to climate change means. Most studies on climate change and conservation, if they consider adaptation at all, assume it is equivalent to the ability of species to adapt naturally to climate change as stated in Article 2 of the United Nations Framework Convention on Climate Change. Adaptation, however, can refer to an array of activities that range from natural adaptation, at one end of the spectrum, to sustainability science in coupled human and natural systems at the other. Most conservation organizations deal with complex systems in which adaptation to climate change involves making decisions on priorities for biodiversity conservation in the face of dynamic risks and involving the public in these decisions. Discursive methods such as analytic deliberation are useful for integrating scientific knowledge with public perceptions and values, particularly when large uncertainties and risks are involved. The use of scenarios in conservation planning is a useful way to build shared understanding at the science-policy interface. Similarly, boundary organizations-organizations or institutions that bridge different scales or mediate the relationship between science and policy-could prove useful for managing the transdisciplinary nature of adaptation to climate change, providing communication and brokerage services and helping to build adaptive capacity. The fact that some nongovernmental organizations (NGOs) are active across the areas of science, policy, and practice makes them well placed to fulfill this role in integrated assessments of biodiversity conservation and adaptation to climate change.

  7. Integrating conservation costs into sea level rise adaptive conservation prioritization

    Directory of Open Access Journals (Sweden)

    Mingjian Zhu

    2015-07-01

    Full Text Available Biodiversity conservation requires strategic investment as resources for conservation are often limited. As sea level rises, it is important and necessary to consider both sea level rise and costs in conservation decision making. In this study, we consider costs of conservation in an integrated modeling process that incorporates a geomorphological model (SLAMM, species habitat models, and conservation prioritization (Zonation to identify conservation priorities in the face of landscape dynamics due to sea level rise in the Matanzas River basin of northeast Florida. Compared to conservation priorities that do not consider land costs in the analysis process, conservation priorities that consider costs in the planning process change significantly. The comparison demonstrates that some areas with high conservation values might be identified as lower priorities when integrating economic costs in the planning process and some areas with low conservation values might be identified as high priorities when considering costs in the planning process. This research could help coastal resources managers make informed decisions about where and how to allocate conservation resources more wisely to facilitate biodiversity adaptation to sea level rise.

  8. Radiation technology for environmental conservation

    International Nuclear Information System (INIS)

    Machi, Sueo; Tokunaga, Okihiro; Arai, Hidehiko; Hashimoto, Shoji

    1991-01-01

    This paper reviews research and development of radiation technology application for environmental conservation. Our group in cooperation with Ebara Mfg. co., Ltd. first found and studied removals of sulfur dioxide and nitrogen oxides from flue gases by electron beam irradiation. Most of sulfer dioxide and nitrogen oxides are converted to ammonium sulfate and nitrate by radiation with the addition of ammonia. Feasibility studies of this technology by pilot scale experiments have been carried out in Japan, USA and Germany for flue gases from iron-ore sintering furnace and coal fire power station. About 90 % of CO 2 and NO X are removed with 15 kGy. Organic pollutants in wastewater, drinking water and ground water have been found to be reduced by radiation technology. Synergetic effect of radiation and ozone to remove pollutants was also found. Disinfection of water effluent from sewage water treatment plant by radiation instead of using chlorine to avoid formation of chlorinated organic compounds has been studied by our group. Efficient composting of sewage sludge using radiation disinfection followed by fermentation has been developed and produced compost can be used as fertilizer. In conclusion, radiation technology can provide new efficient treatment method for wastes. (author)

  9. Radiation technology for environmental conservation

    Energy Technology Data Exchange (ETDEWEB)

    Machi, Sueo; Tokunaga, Okihiro; Arai, Hidehiko; Hashimoto, Shoji [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment

    1991-01-01

    This paper reviews research and development of radiation technology application for environmental conservation. Our group in cooperation with Ebara Mfg. co., Ltd. first found and studied removals of sulfur dioxide and nitrogen oxides from flue gases by electron beam irradiation. Most of sulfer dioxide and nitrogen oxides are converted to ammonium sulfate and nitrate by radiation with the addition of ammonia. Feasibility studies of this technology by pilot scale experiments have been carried out in Japan, USA and Germany for flue gases from iron-ore sintering furnace and coal fire power station. About 90 % of CO{sub 2} and NO{sub X} are removed with 15 kGy. Organic pollutants in wastewater, drinking water and ground water have been found to be reduced by radiation technology. Synergetic effect of radiation and ozone to remove pollutants was also found. Disinfection of water effluent from sewage water treatment plant by radiation instead of using chlorine to avoid formation of chlorinated organic compounds has been studied by our group. Efficient composting of sewage sludge using radiation disinfection followed by fermentation has been developed and produced compost can be used as fertilizer. In conclusion, radiation technology can provide new efficient treatment method for wastes. (author).

  10. Radiation technology for environmental conservation

    International Nuclear Information System (INIS)

    Machi, S.

    1983-01-01

    The use of radiation technology for environmental conservation is becoming increasingly important. Commercial plants for the radiation treatment of sewage sludge to reduce pathogenic micro-organisms have been operating in the Federal Republic of Germany for the past ten years and their technical and economical feasibility has been demonstrated. Irradiation of dried sludge has been developed at the Sandia National Laboratory (USA) using Cs-137, and the construction of a commercial plant is planned in Albuquerque. At the Japan Atomic Energy Research Institute (JAERI), efforts are under way to increase the rate of composting of sludge by radiation. Regarding waste water treatment, a significant synergistic effect of radiation and ozone was found in the reduction of TOC. The construction of a gamma irradiation plant is in the planning stage in Canada, for the disinfection of virus-contaminated waste effluents from the Canadian Animal Disease Research Institute. The treatment of exhaust gases by electron beam has been studied in Japan using a large pilot plant which demonstrated that 90% of SO 2 and 80% of NOsub(x) can be removed from the flue gas of iron ore sintering furnaces. The US Department of Energy is assisting in projects for the further development of this technology for combined removal of SO 2 and NOsub(x) in flue gas from coal burning power stations. (author)

  11. Technology for nature conservation: an industry perspective.

    Science.gov (United States)

    Joppa, Lucas N

    2015-11-01

    Information age technology has the potential to change the game for conservation by continuously monitoring the pulse of the natural world. Whether or not it will depends on the ability of the conservation sector to build a community of practice, come together to define key technology challenges and work with a wide variety of partners to create, implement, and sustain solutions. I describe why these steps are necessary, outline the latest developments in the field and offer actionable ways forward for conservation agencies, universities, funding bodies, professional societies, and technology corporations to come together to realize the revolution that computational technologies can bring for biodiversity conservation.

  12. Energy conservation potential of surface modification technologies

    Energy Technology Data Exchange (ETDEWEB)

    Le, H.K.; Horne, D.M.; Silberglitt, R.S.

    1985-09-01

    This report assesses the energy conservation impact of surface modification technologies on the metalworking industries. The energy conservation impact of surface modification technologies on the metalworking industries is assessed by estimating their friction and wear tribological sinks and the subsequent reduction in these sinks when surface modified tools are used. Ion implantation, coatings, and laser and electron beam surface modifications are considered.

  13. Technologies for climate change adaptation. Agriculture sector

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, X [ed.; UNEP Risoe Centre, Roskilde (Denmark); Clements, R; Quezada, A; Torres, J [Practical Action Latin America, Lima (Peru); Haggar, J [Univ. of Greenwich, London (United Kingdom)

    2011-08-15

    This guidebook presents a selection of technologies for climate change adaptation in the agriculture sector. A set of 22 adaptation technologies are showcased. These are based primarily on the principles of agroecology, but also include scientific technologies of climate and biological sciences complemented by important sociological and institutional capacity building processes that are required for climate change to function. The technologies cover: 1) Planning for climate change and variability. 2) Sustainable water use and management. 3) Soil management. 4) Sustainable crop management. 5) Sustainable livestock management. 6) Sustainable farming systems. 7) Capacity building and stakeholder organisation. Technologies that tend to homogenise the natural environment and agricultural production have low possibilities of success in environmental stress conditions that are likely to result from climate change. On the other hand, technologies that allow for, and promote diversity are more likely to provide a strategy which strengthens agricultural production in the face of uncertain future climate change scenarios. The 22 technologies showcased in this guidebook have been selected because they facilitate the conservation and restoration of diversity while also providing opportunities for increasing agricultural productivity. Many of these technologies are not new to agricultural production practices, but they are implemented based on the assessment of current and possible future impacts of climate change in a particular location. agroecology is an approach that encompasses concepts of sustainable production and biodiversity promotion and therefore provides a useful framework for identifying and selecting appropriate adaptation technologies for the agriculture sector. The guidebook provides a systematic analysis of the most relevant information available on climate change adaptation technologies in the agriculture sector. It has been compiled based on a literature

  14. Lamarck and the adaptive conservation of life

    Directory of Open Access Journals (Sweden)

    Galera, Andrés

    2009-12-01

    Full Text Available This paper studies Lamarck’s evolutionary thought through four analytic elements. Firstly, Lamarckian construction of a founding evolutionary archetype. Secondly, the interpretation of nature as a material system where the organic change represents a continuous process aimed at the adaptative conservation of life. Thirdly, the definition of a genealogical process on the origin of species which identifies the natural method. Fourthly, the redefinition of the concept of species applying the arguments of temporary relativity and individual instability.

    En este artículo se estudia el ideario evolucionista lamarckiano desarrollando cuatro elementos analíticos. Primero, la elaboración de un arquetipo evolutivo fundacional. Segundo, la interpretación de la naturaleza como un sistema material donde el cambio orgánico da sentido a un proceso continuo dirigido a la conservación de la vida. Tercero, la definición de un principio genealógico sobre el origen de las especies que identifica el método natural. Cuarto, la reformulación del concepto de especie utilizando los argumentos de relatividad temporal e inestabilidad individual.

  15. Adapting the bioblitz to meet conservation needs.

    Science.gov (United States)

    Parker, Sophie S; Pauly, Gregory B; Moore, James; Fraga, Naomi S; Knapp, John J; Principe, Zachary; Brown, Brian V; Randall, John M; Cohen, Brian S; Wake, Thomas A

    2018-03-01

    When conservation strategies require new, field-based information, practitioners must find the best ways to rapidly deliver high-quality survey data. To address this challenge, several rapid-assessment approaches have been developed since the early 1990s. These typically involve large areas, take many months to complete, and are not appropriate when conservation-relevant survey data are urgently needed for a specific locale. In contrast, bioblitzes are designed for quick collection of site-specific survey data. Although bioblitzes are commonly used to achieve educational or public-engagement goals, conservation practitioners are increasingly using a modified bioblitz approach to generate conservation-relevant data while simultaneously enhancing research capacity and building working partnerships focused on conservation concerns. We term these modified events expert bioblitzes. Several expert bioblitzes have taken place on lands of conservation concern in Southern California and have involved collaborative efforts of government agencies, nonprofit organizations, botanic gardens, museums, and universities. The results of expert bioblitzes directly informed on-the-ground conservation and decision-making; increased capacity for rapid deployment of expert bioblitzes in the future; and fostered collaboration and communication among taxonomically and institutionally diverse experts. As research and conservation funding becomes increasingly scarce, expert bioblitzes can play an increasingly important role in biodiversity conservation. © 2018 The Authors. Conservation Biology published by Wiley Periodicals, Inc. on behalf of Society for Conservation Biology.

  16. Integrating technologies for scalable ecology and conservation

    NARCIS (Netherlands)

    Marvin, D.C.; Koh, L.P.; Lynam, A.J.; Wich, S.; Davies, A.B.; Krishnamurthy, R.; Stokes, E.; Starkey, R.; Asner, G.P.

    Integration of multiple technologies greatly increases the spatial and temporal scales over which ecological patterns and processes can be studied, and threats to protected ecosystems can be identified and mitigated. A range of technology options relevant to ecologists and conservation practitioners

  17. Are conservation organizations configured for effective adaptation to global change?

    Science.gov (United States)

    Armsworth, Paul R.; Larson, Eric R.; Jackson, Stephen T.; Sax, Dov F.; Simonin, Paul W.; Blossey, Bernd; Green, Nancy; Lester, Liza; Klein, Mary L.; Ricketts, Taylor H.; Runge, Michael C.; Shaw, M. Rebecca

    2015-01-01

    Conservation organizations must adapt to respond to the ecological impacts of global change. Numerous changes to conservation actions (eg facilitated ecological transitions, managed relocations, or increased corridor development) have been recommended, but some institutional restructuring within organizations may also be needed. Here we discuss the capacity of conservation organizations to adapt to changing environmental conditions, focusing primarily on public agencies and nonprofits active in land protection and management in the US. After first reviewing how these organizations anticipate and detect impacts affecting target species and ecosystems, we then discuss whether they are sufficiently flexible to prepare and respond by reallocating funding, staff, or other resources. We raise new hypotheses about how the configuration of different organizations enables them to protect particular conservation targets and manage for particular biophysical changes that require coordinated management actions over different spatial and temporal scales. Finally, we provide a discussion resource to help conservation organizations assess their capacity to adapt.

  18. Integrating technologies for scalable ecology and conservation

    OpenAIRE

    David C. Marvin; Lian Pin Koh; Antony J. Lynam; Serge Wich; Andrew B. Davies; Ramesh Krishnamurthy; Emma Stokes; Ruth Starkey; Gregory P. Asner

    2016-01-01

    Integration of multiple technologies greatly increases the spatial and temporal scales over which ecological patterns and processes can be studied, and threats to protected ecosystems can be identified and mitigated. A range of technology options relevant to ecologists and conservation practitioners are described, including ways they can be linked to increase the dimensionality of data collection efforts. Remote sensing, ground-based, and data fusion technologies are broadly discussed in the ...

  19. Climatic Alterations of Wetlands: Conservation and Adaptation Practices in Bangladesh

    Science.gov (United States)

    Siddiquee, S. A.

    2016-02-01

    Unique geographic location and geo-morphological conditions of Bangladesh have made the wetlands of this country one of the most vulnerable to climate change. Wetland plays a crucial role in maintaining the ecological balance of ecosystems and cultural figures and which occupy around 50% of the area. Drought, excessive temperature, mountain snowfields and glaciers melting, riverbank erosion, salinity intrusion, flashflood, storm surges, higher water temperatures, precipitation anomalies, coastal cyclones, seasonal anomalies and extremes are main threats to the wetland ecosystem. Enhanced UV-B radiation and increased summer precipitation will significantly increase dissolved organic carbon concentrations altering major biogeochemical cycles and also will result into the expansion of range for many invasive aquatic weeds. Generally, rising temperature will lower water quality through a fall in oxygen concentrations, release of phosphorus from sediments, increased thermal stability, and altered mixing patterns. As a result biodiversity is getting degraded, many species of flora and fauna are getting threatened, and wetland-based ecosystem is getting degenerated. At the same time, the living conditions of local people are deteriorating as livelihoods, socioeconomic institutions, and extensive cultural values as well. For conserving and managing wetlands technology, legislation, educational knowledge, action plan strategy and restoration practices are required. In order to address the human needs in the changing climate community-based adaptation approaches and wetland restoration, practices had been taken in almost every type of wetlands in Bangladesh. Therefore, Bangladesh now needs a comprehensive strategy and integrated system combining political, economic, social, technological approaches and institutional supports to address sustainable wetland restoration, conservation and the newly added crisis, climate change.

  20. Adapting technology from other industries

    International Nuclear Information System (INIS)

    Bryan, G.H.

    1989-01-01

    In the light of tougher requirements on water chemistry and liquid discharged to the environment, and with an awareness that more efficient filtration can reduce plant radiation levels, vendors are starting to adapt proven filtration technology from other industries for use in nuclear plants. Two materials have been found that work quite well in nuclear service. The first, a glass-fibre paper pleated together with a supported membrane, offers excellent dirt holding capacity and very predictable efficiency levels. The second, a meltblown, calendered polypropylene, has an asymmetric pore structure that allows it to act to some degree as a depth filter and has the same efficiency as a supported membrane. (author)

  1. Adaptive social impact management for conservation and environmental management.

    Science.gov (United States)

    Kaplan-Hallam, Maery; Bennett, Nathan J

    2018-04-01

    Concerns about the social consequences of conservation have spurred increased attention the monitoring and evaluation of the social impacts of conservation projects. This has resulted in a growing body of research that demonstrates how conservation can produce both positive and negative social, economic, cultural, health, and governance consequences for local communities. Yet, the results of social monitoring efforts are seldom applied to adaptively manage conservation projects. Greater attention is needed to incorporating the results of social impact assessments in long-term conservation management to minimize negative social consequences and maximize social benefits. We bring together insights from social impact assessment, adaptive management, social learning, knowledge coproduction, cross-scale governance, and environmental planning to propose a definition and framework for adaptive social impact management (ASIM). We define ASIM as the cyclical process of monitoring and adaptively managing social impacts over the life-span of an initiative through the 4 stages of profiling, learning, planning, and implementing. We outline 14 steps associated with the 4 stages of the ASIM cycle and provide guidance and potential methods for social-indicator development, predictive assessments of social impacts, monitoring and evaluation, communication of results, and identification and prioritization of management responses. Successful ASIM will be aided by engaging with best practices - including local engagement and collaboration in the process, transparent communication of results to stakeholders, collective deliberation on and choice of interventions, documentation of shared learning at the site level, and the scaling up of insights to inform higher-level conservation policies-to increase accountability, trust, and perceived legitimacy among stakeholders. The ASIM process is broadly applicable to conservation, environmental management, and development initiatives at various

  2. Climate change adaptation benefits of potential conservation partnerships.

    Science.gov (United States)

    Monahan, William B; Theobald, David M

    2018-01-01

    We evaluate the world terrestrial network of protected areas (PAs) for its partnership potential in responding to climate change. That is, if a PA engaged in collaborative, trans-boundary management of species, by investing in conservation partnerships with neighboring areas, what climate change adaptation benefits might accrue? We consider core tenets of conservation biology related to protecting large areas with high environmental heterogeneity and low climate change velocity and ask how a series of biodiversity adaptation indicators change across spatial scales encompassing potential PA and non-PA partners. Less than 1% of current world terrestrial PAs equal or exceed the size of established and successful conservation partnerships. Partnering at this scale would increase the biodiversity adaptation indicators by factors up to two orders of magnitude, compared to a null model in which each PA is isolated. Most partnership area surrounding PAs is comprised of non-PAs (70%), indicating the importance of looking beyond the current network of PAs when promoting climate change adaptation. Given monumental challenges with PA-based species conservation in the face of climate change, partnerships provide a logical and achievable strategy for helping areas adapt. Our findings identify where strategic partnering efforts in highly vulnerable areas of the world may prove critical in safeguarding biodiversity.

  3. The role of conservation programs in drought risk adaptation

    Science.gov (United States)

    Steven Wallander; Marcel Aillery; Daniel Hellerstein; Michael Hand

    2013-01-01

    This report evaluates the extent to which farms facing higher levels of drought risk are more likely to participate in conservation programs, and fi nds a strong link between drought risk and program participation. Prior research has shown that climate-related risk exposure infl uences production decisions such as crop choice; our research shows that adaptation also...

  4. Climate-smart conservation: putting adaption principles into practice

    Science.gov (United States)

    Stein, Bruce A.; Glick, Patty; Edelson, Naomi; Staudt, Amanda

    2014-01-01

    Climate change already is having significant impacts on the nation’s species and ecosystems, and these effects are projected to increase considerably over time. As a result, climate change is now a primary lens through which conservation and natural resource management must be viewed. How should we prepare for and respond to the impacts of climate change on wildlife and their habitats? What should we be doing differently in light of these climatic shifts, and what actions continue to make sense? Climate-Smart Conservation: Putting Adaptation Principles into Practice offers guidance for designing and carrying out conservation in the face of a rapidly changing climate. Addressing the growing threats brought about or accentuated by rapid climate change requires a fundamental shift in the practice of natural resource management and conservation. Traditionally, conservationists have focused their efforts on protecting and managing systems to maintain their current state, or to restore degraded systems back to a historical state regarded as more desirable. Conservation planners and practitioners will need to adopt forward-looking goals and implement strategies specifically designed to prepare for and adjust to current and future climatic changes, and the associated impacts on natural systems and human communities—an emerging discipline known as climate change adaptation. The field of climate change adaptation is still in its infancy. Although there is increasing attention focused on the subject, much of the guidance developed to date has been general in nature, concentrating on high-level principles rather than specific actions. It is against this backdrop that this guide was prepared as a means for helping put adaptation principles into practice, and for moving adaptation from planning to action.

  5. Development of new technologies in electric power conservation

    International Nuclear Information System (INIS)

    Geller, H.S.

    1989-01-01

    This presentation reviews overall progress in electricity conservation in the United States and describes major policies that have contributed to the development and implementation of new electricity conserving technologies. A variety of government and utility conservation programs are covered including: research and development programs, equipment and building efficiency standards, and utility incentive programs. (author)

  6. Subjective Technology Adaptivity Predicts Technology Use in Old Age.

    Science.gov (United States)

    Kamin, Stefan T; Lang, Frieder R; Beyer, Anja

    2017-01-01

    To date, not much is known about the psychological and motivational factors underlying technology use in late life. What are the interindividual determinants that lead older adults to invest in using technological innovations despite the age-related physiological changes that impose challenges on behavioral plasticity in everyday life? This research explores interindividual differences in subjective technology adaptivity - a general technology-related motivational resource that accounts for technology use in late life. More specifically, we investigate the influence of this factor relative to demographic characteristics, personality traits, and functional limitations in a longitudinal sample of community-dwelling older adults. We report results from a paper-and-pencil survey with 136 older adults between 59 and 92 years of age (mean = 71.4, SD = 7.4). Of those participants, 77 participated in a 2-year follow-up. We assessed self-reports of technology use, subjective technology adaptivity, functional limitations, and the personality traits openness to new experiences and neuroticism. Higher levels of subjective technology adaptivity were associated with technology use at the first measurement as well as increased use over the course of 2 years. Subjective technology adaptivity is a significant predictor of technology use in old age. Our findings contribute to improving the understanding of interindividual differences when using technological innovation in late life. Moreover, our findings have implications in the context of user involvement and may contribute to the successful development of innovative technology for older adults. © 2017 S. Karger AG, Basel.

  7. Adaptive Technologies for Accommodating Persons with Disabilities.

    Science.gov (United States)

    Berliss, Jane; And Others

    1993-01-01

    Eight articles review the progress achieved in making library computing technologies and library services accessible to people with disabilities. Adaptive technologies, automated conversion into Braille, and successful programs that demonstrate compliance with the American with Disabilities Act are described. A resource list is included. (EA)

  8. Adaptive evolution of conserved noncoding elements in mammals.

    Directory of Open Access Journals (Sweden)

    Su Yeon Kim

    2007-09-01

    Full Text Available Conserved noncoding elements (CNCs are an abundant feature of vertebrate genomes. Some CNCs have been shown to act as cis-regulatory modules, but the function of most CNCs remains unclear. To study the evolution of CNCs, we have developed a statistical method called the "shared rates test" to identify CNCs that show significant variation in substitution rates across branches of a phylogenetic tree. We report an application of this method to alignments of 98,910 CNCs from the human, chimpanzee, dog, mouse, and rat genomes. We find that approximately 68% of CNCs evolve according to a null model where, for each CNC, a single parameter models the level of constraint acting throughout the phylogeny linking these five species. The remaining approximately 32% of CNCs show departures from the basic model including speed-ups and slow-downs on particular branches and occasionally multiple rate changes on different branches. We find that a subset of the significant CNCs have evolved significantly faster than the local neutral rate on a particular branch, providing strong evidence for adaptive evolution in these CNCs. The distribution of these signals on the phylogeny suggests that adaptive evolution of CNCs occurs in occasional short bursts of evolution. Our analyses suggest a large set of promising targets for future functional studies of adaptation.

  9. Conserved sex chromosomes across adaptively radiated Anolis lizards.

    Science.gov (United States)

    Rovatsos, Michail; Altmanová, Marie; Pokorná, Martina; Kratochvíl, Lukáš

    2014-07-01

    Vertebrates possess diverse sex-determining systems, which differ in evolutionary stability among particular groups. It has been suggested that poikilotherms possess more frequent turnovers of sex chromosomes than homoiotherms, whose effective thermoregulation can prevent the emergence of the sex reversals induced by environmental temperature. Squamate reptiles used to be regarded as a group with an extensive variability in sex determination; however, we document how the rather old radiation of lizards from the genus Anolis, known for exceptional ecomorphological variability, was connected with stability in sex chromosomes. We found that 18 tested species, representing most of the phylogenetic diversity of the genus, share the gene content of their X chromosomes. Furthermore, we discovered homologous sex chromosomes in species of two genera (Sceloporus and Petrosaurus) from the family Phrynosomatidae, serving here as an outgroup to Anolis. We can conclude that the origin of sex chromosomes within iguanas largely predates the Anolis radiation and that the sex chromosomes of iguanas remained conserved for a significant part of their evolutionary history. Next to therian mammals and birds, Anolis lizards therefore represent another adaptively radiated amniote clade with conserved sex chromosomes. We argue that the evolutionary stability of sex-determining systems may reflect an advanced stage of differentiation of sex chromosomes rather than thermoregulation strategy. © 2014 The Author(s). Evolution © 2014 The Society for the Study of Evolution.

  10. A global conservation system for climate-change adaptation.

    Science.gov (United States)

    Hannah, Lee

    2010-02-01

    Climate change has created the need for a new strategic framework for conservation. This framework needs to include new protected areas that account for species range shifts and management that addresses large-scale change across international borders. Actions within the framework must be effective in international waters and across political frontiers and have the ability to accommodate large income and ability-to-pay discrepancies between countries. A global protected-area system responds to these needs. A fully implemented global system of protected areas will help in the transition to a new conservation paradigm robust to climate change and will ensure the integrity of the climate services provided by carbon sequestration from the world's natural habitats. The internationally coordinated response to climate change afforded by such a system could have significant cost savings relative to a system of climate adaptation that unfolds solely at a country level. Implementation of a global system is needed very soon because the effects of climate change on species and ecosystems are already well underway.

  11. Hydrodynamics in full general relativity with conservative adaptive mesh refinement

    Science.gov (United States)

    East, William E.; Pretorius, Frans; Stephens, Branson C.

    2012-06-01

    There is great interest in numerical relativity simulations involving matter due to the likelihood that binary compact objects involving neutron stars will be detected by gravitational wave observatories in the coming years, as well as to the possibility that binary compact object mergers could explain short-duration gamma-ray bursts. We present a code designed for simulations of hydrodynamics coupled to the Einstein field equations targeted toward such applications. This code has recently been used to study eccentric mergers of black hole-neutron star binaries. We evolve the fluid conservatively using high-resolution shock-capturing methods, while the field equations are solved in the generalized-harmonic formulation with finite differences. In order to resolve the various scales that may arise, we use adaptive mesh refinement (AMR) with grid hierarchies based on truncation error estimates. A noteworthy feature of this code is the implementation of the flux correction algorithm of Berger and Colella to ensure that the conservative nature of fluid advection is respected across AMR boundaries. We present various tests to compare the performance of different limiters and flux calculation methods, as well as to demonstrate the utility of AMR flux corrections.

  12. The research on NURBS adaptive interpolation technology

    Science.gov (United States)

    Zhang, Wanjun; Gao, Shanping; Zhang, Sujia; Zhang, Feng

    2017-04-01

    In order to solve the problems of Research on NURBS Adaptive Interpolation Technology, such as interpolation time bigger, calculation more complicated, and NURBS curve step error are not easy changed and so on. This paper proposed a study on the algorithm for NURBS adaptive interpolation method of NURBS curve and simulation. We can use NURBS adaptive interpolation that calculates (xi, yi, zi). Simulation results show that the proposed NURBS curve interpolator meets the high-speed and high-accuracy interpolation requirements of CNC systems. The interpolation of NURBS curve should be finished. The simulation results show that the algorithm is correct; it is consistent with a NURBS curve interpolation requirements.

  13. Delivering service adaptation with 3G technology

    NARCIS (Netherlands)

    Liotta, A.; Yew, A.; Bohoris, C.; Pavlou, G.; Feridun, M.; Kropf, P.G.; Babin, G.

    2002-01-01

    Now that 3G technologies have reached their maturity, newly advanced services can be delivered to the mobile user. These include context- aware services, adaptable services and Virtual Home Environment (VHE)-like services. Important research issues relate, however, to managing such services through

  14. Educational Cognitive Technologies as Human Adaptation Strategies

    Directory of Open Access Journals (Sweden)

    Marja Nesterova

    2017-07-01

    Full Text Available Modernity is characterized by profound changes in all spheres of human life caused by the global transformations on macro and micro levels of social reality. These changes allow us to speak about the present as the era of civilizational transition in the mode of uncertainty. Therefore, this situation demands qualitative transformations of human adaptive strategies and educational technologies accordingly. The dominant role in the dynamics of pedagogics and andragogy’s landscape belongs to transformative learning. The transformative learning theory is considered as the relevant approach to education of the individual, which is able to become an autonomous communicative actor of the social complexity. The article considers the cognitive technologies of social cohesion development and perspectives of their implementation in the educational dimension. In addition to implementing the principles of inclusion, equity in education, an important factor for improving social cohesion, stability and unity of society is the development of cognitive educational technologies. The key factors and foundations for the cognitive educational technologies are transversal competencies. They create the conditions for civil, public dialogue, non-violent type of communication. These “21st century skills” are extremely important for better human adaptation. One of the aspects and roots of social adaptation is social cohesion. Mutual determinations and connections between social cohesion development and transversal competences have been shown. The perspective direction of further researches is to find a methodological base for the further development of cognitive education technologies and platform for realization of innovative services for educational programs. New educational paradigm offers the concept of human adaptation as cognitive effectiveness and how to reach it through educational technologies. The article includes topics of creative thinking, teambuilding

  15. Basic research on energy conservation in developing countries. Report of the International Conference on Adaptation and Mitigation Technologies for Climate Change; Hatten tojokoku energy shohi koritsuka kiso chosanado jigyo. Kiko hendo ni kansuru tekio kanwa gijutsu kokusai kaigi hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The International Conference on Adaptation and Mitigation Technologies for Climate Change was held based on the 1st Conference of the Parties in 1995 of the United Nations Framework Convention on Climate Change, and the 2nd evaluation report of the Intergovernmental Panel on Climate Change (IPCC). This report carries the outline of this conference and minutes. Japanese government had studied the framework of activities implemented jointly (AIJ) for emission control of greenhouse gases by voluntary workers jointly with developing countries. The government decided the basis of the AIJ Japan program in 1995, and approved the evaluation guidelines of this program including confirmed and considered matters which are necessary for government offices related to this program to evaluate and approve each project. IPCC approved the 2nd evaluation report in its general meeting in 1995. This conference was thus held to discuss strategic technology and international cooperation with participation of writers of the 2nd IPCC report, policy planners of Asian countries, Japanese industries, governmental offices and NGO.

  16. Energy conservation technologies based on thermodynamic principles

    Energy Technology Data Exchange (ETDEWEB)

    Hirata, Masaru [Shibaura Institute of Technology of Technology, Tokyo (Japan)

    1996-12-31

    In order to reduce CO{sub 2} emission to prevent global warming, the most promising way for electric generation in the Northeast Asia is to introduce cogeneration and {open_quotes}repowering{close_quotes} technologies based on high temperature gas turbines fueled by natural gas. Especially the old type coal burning boiler-steam turbine plants should be retrofit by introducing gas turbines to become highly efficient combined cycle. Same technologies should be applied to the old garbage incineration plants and/or even to the nuclear power plants. The exhaust heat or steam should become much increased and it should be utilized as the process heat for industries or heat supply as the distinct heating or cooling for residential area. This paper introduces a brief survey of these new technologies.

  17. Digital technology and human development: A charter for nature conservation

    NARCIS (Netherlands)

    Maffey, G.; Homans, H.; Banks, K.; Arts, K.A.J.

    2015-01-01

    The application of digital technology in conservation holds much potential for advancing the understanding of, and facilitating interaction with, the natural world. In other sectors, digital technology has long been used to engage communities and share information. Human development—which holds

  18. A conservative scheme for 2D and 3D adaptive semi-Lagrangian advection

    OpenAIRE

    Behrens, Jörn; Mentrup, Lars

    2005-01-01

    This article describes a 2D and 3D adaptive and mass conservingsemi-Lagrangian advection scheme for atmospheric transport problems. Fromthe integral form of the conservation law we derive a semi-Lagrangian schemebased on conservation of mass along trajectories. The mapping of mass fromthe old (adaptively refined and possibly different) grid to the upstream controlvolume is performed by a mass packet based scheme, essentially consistingof a sub-grid discretization. We validate the new adaptive...

  19. Development of clean environment conservation technology by radiation

    International Nuclear Information System (INIS)

    Lee, Myunjoo; Kim, Tak Hyun; Jung, In Ha

    2012-04-01

    This report is aim to develop the technology for environmental conservation by radiation. It is consisted of two research parts. One is development of wastewater disinfection technology by radiation and the other is development of livestock waste treatment technology by radiation. For the development of wastewater disinfection technology disinfect ion process, technology for treatment of toxic organic chemicals and assessment of ecological toxicity, technology for treatment of endocrine disrupting chemicals and assessment of genetic safety were developed. For the development of livestock waste treatment technology, process for simultaneous removal of nutrients, technology for disinfection and quality enhancement of livestock waste compost, technology for reduction of composting periods, monitoring of toxic organic compounds, pretreatment technology for organic toxic chemicals and enhancement of biological treatment efficiencies were developed. Based on basic research, advanced livestock wastewater treatment process using radiation was established

  20. ADAPTIVE REUSE FOR NEW SOCIAL AND MUNICIPAL FUNCTIONS AS AN ACCEPTABLE APPROACH FOR CONSERVATION OF INDUSTRIAL HERITAGE ARCHITECTURE IN THE CZECH REPUBLIC

    OpenAIRE

    Oleg Fetisov

    2016-01-01

    The present paper deals with a problem of conservation and adaptive reuse of industrial heritage architecture. The relevance and topicality of the problem of adaptive reuse of industrial heritage architecture for new social and municipal functions as the conservation concept are defined. New insights on the typology of industrial architecture are reviewed (e. g. global changes in all European industry, new concepts and technologies in manufacturing, new features of industrial architecture and...

  1. Between tradition and technological innovation: challenges to lime Heritage conservation

    Directory of Open Access Journals (Sweden)

    Marluci Menezes

    2016-01-01

    Full Text Available The aim is to discuss the relationship between traditional and scientific technological knowledge as innovative and fundamental to heritage conservation. It is argued that this innovation does not necessarily come from scientific knowledge, but potentially from a wise articulation between these two types of knowledge. This discussion starts from an already long process of reflection on lime heritage conservation, as developed in LNEC from research projects.

  2. Adaptive technologies for library and information services for ...

    African Journals Online (AJOL)

    Adaptive technologies for library and information services for physically challenged in special education schools of Kaduna State. ... special education schools because; these are genuine demand from adaptive technology users of the library.

  3. Electron beam irradiation technology for environmental conservation

    International Nuclear Information System (INIS)

    Tokunaga, Okihiro; Arai, Hidehiko; Hashimoto, Shoji

    1992-01-01

    This paper reviews research and development of application of electron beam (EB) irradiation technology for treatment of flue gas and waste water, and for disinfection of sewage sludge. Feasibility studies on EB purification of flue gases have been performed with pilot-scale experiments in Japan, the USA and Germany, and is being carried out in Poland for flue gases from iron-sintering furnaces or coal burning boilers. Based on results obtained by experiments using simulated flue gas, pilot scale test for treatment of flue gas of low-sulfur containing coal combustion has recently started in Japan. Organic pollutants in waste water and ground water have been found to be decomposed by EB irradiation. Synergetic effect of EB irradiation and ozone addition was found to improve the decomposition efficiency. Electron beam irradiation technology for disinfection of water effluent from water treatment plants was found to avoid formation of chlorinated organic compounds which are formed in using chlorine. Efficient process for composting of sewage sludge disinfected by EB irradiation has been developed by small scale and pilot scale experiments. In the new process, disinfection by EB irradiation and composing can be done separately and optimum temperature for composting can be, therefore, selected to minimize period of composting. (author)

  4. Technologies for adaptation. Perspectives and practical experiences; Climate change

    Energy Technology Data Exchange (ETDEWEB)

    Christiansen, Lars; Olhoff, A; Traerup, S

    2011-11-15

    The present report is the second volume of the UNEP Risoe Centre Technology Transfer Perspectives Series. The report is related to the global Technology Needs Assessment (TNA) project, financed by the Global Environment Facility (GEF) and implemented by UNEP Risoe Centre. The nine articles in this volume discuss issues like: a) the concepts and context of technologies for adaptation; b) assessments of adaptation technology needs; c) practical experiences from working with technologies for adaptation. (LN)

  5. Semantic Web Technologies for the Adaptive Web

    DEFF Research Database (Denmark)

    Dolog, Peter; Nejdl, Wolfgang

    2007-01-01

    Ontologies and reasoning are the key terms brought into focus by the semantic web community. Formal representation of ontologies in a common data model on the web can be taken as a foundation for adaptive web technologies as well. This chapter describes how ontologies shared on the semantic web...... provide conceptualization for the links which are a main vehicle to access information on the web. The subject domain ontologies serve as constraints for generating only those links which are relevant for the domain a user is currently interested in. Furthermore, user model ontologies provide additional...... means for deciding which links to show, annotate, hide, generate, and reorder. The semantic web technologies provide means to formalize the domain ontologies and metadata created from them. The formalization enables reasoning for personalization decisions. This chapter describes which components...

  6. An adaptive management process for forest soil conservation.

    Science.gov (United States)

    Michael P. Curran; Douglas G. Maynard; Ronald L. Heninger; Thomas A. Terry; Steven W. Howes; Douglas M. Stone; Thomas Niemann; Richard E. Miller; Robert F. Powers

    2005-01-01

    Soil disturbance guidelines should be based on comparable disturbance categories adapted to specific local soil conditions, validated by monitoring and research. Guidelines, standards, and practices should be continually improved based on an adaptive management process, which is presented in this paper. Core components of this process include: reliable monitoring...

  7. Application of electron beams to environmental conservation technology

    International Nuclear Information System (INIS)

    Pikaev, A.K.

    1992-01-01

    The paper is a review of current status of the application of electron beams to environmental conservation technology. Different aspects of radiation treatment of natural and polluted drinking water, radiation purification of industrial and municipal wastes, radiation treatment of sewage sludge and radiation purification of exhaust gases are considered. The special attention is paid to the respective pilot and industrial facilities. (author) 70 refs

  8. Adaptive sports technology and biomechanics: wheelchairs.

    Science.gov (United States)

    Cooper, Rory A; De Luigi, Arthur Jason

    2014-08-01

    Wheelchair sports are an important tool in the rehabilitation of people with severe chronic disabilities and have been a driving force for innovation in technology and practice. In this paper, we will present an overview of the adaptive technology used in Paralympic sports with a special focus on wheeled technology and the impact of design on performance (defined as achieving the greatest level of athletic ability and minimizing the risk of injury). Many advances in manual wheelchairs trace their origins to wheelchair sports. Features of wheelchairs that were used for racing and basketball 25 or more years ago have become integral to the manual wheelchairs that people now use every day; moreover, the current components used on ultralight wheelchairs also have benefitted from technological advances developed for sports wheelchairs. For example, the wheels now used on chairs for daily mobility incorporate many of the components first developed for sports chairs. Also, advances in manufacturing and the availability of aerospace materials have driven current wheelchair design and manufacture. Basic principles of sports wheelchair design are universal across sports and include fit; minimizing weight while maintaining high stiffness; minimizing rolling resistance; and optimizing the sports-specific design of the chair. However, a well-designed and fitted wheelchair is not sufficient for optimal sports performance: the athlete must be well trained, skilled, and use effective biomechanics because wheelchair athletes face some unique biomechanical challenges. Copyright © 2014 American Academy of Physical Medicine and Rehabilitation. Published by Elsevier Inc. All rights reserved.

  9. Analysis and adaptive control of a novel 3-D conservative no-equilibrium chaotic system

    Directory of Open Access Journals (Sweden)

    Vaidyanathan Sundarapandian

    2015-09-01

    Full Text Available First, this paper announces a seven-term novel 3-D conservative chaotic system with four quadratic nonlinearities. The conservative chaotic systems are characterized by the important property that they are volume conserving. The phase portraits of the novel conservative chaotic system are displayed and the mathematical properties are discussed. An important property of the proposed novel chaotic system is that it has no equilibrium point. Hence, it displays hidden chaotic attractors. The Lyapunov exponents of the novel conservative chaotic system are obtained as L1 = 0.0395,L2 = 0 and L3 = −0.0395. The Kaplan-Yorke dimension of the novel conservative chaotic system is DKY =3. Next, an adaptive controller is designed to globally stabilize the novel conservative chaotic system with unknown parameters. Moreover, an adaptive controller is also designed to achieve global chaos synchronization of the identical conservative chaotic systems with unknown parameters. MATLAB simulations have been depicted to illustrate the phase portraits of the novel conservative chaotic system and also the adaptive control results.

  10. ADAPTIVE REUSE FOR NEW SOCIAL AND MUNICIPAL FUNCTIONS AS AN ACCEPTABLE APPROACH FOR CONSERVATION OF INDUSTRIAL HERITAGE ARCHITECTURE IN THE CZECH REPUBLIC

    Directory of Open Access Journals (Sweden)

    Oleg Fetisov

    2016-04-01

    Full Text Available The present paper deals with a problem of conservation and adaptive reuse of industrial heritage architecture. The relevance and topicality of the problem of adaptive reuse of industrial heritage architecture for new social and municipal functions as the conservation concept are defined. New insights on the typology of industrial architecture are reviewed (e. g. global changes in all European industry, new concepts and technologies in manufacturing, new features of industrial architecture and their construction and typology, first results of industrialization and changes in the typology of industrial architecture in post-industrial period. General goals and tasks of conservation in context of adaptive reuse of industrial heritage architecture are defined (e. g. historical, architectural and artistic, technical. Adaptive reuse as an acceptable approach for conservation and new use is proposed and reviewed. Moreover, the logical model of adaptive reuse of industrial heritage architecture as an acceptable approach for new use has been developed. Consequently, three general methods for the conservation of industrial heritage architecture by the adaptive reuse approach are developed: historical, architectural and artistic, technical. Relevant functional methods' concepts (social concepts are defined and classified. General beneficial effect of the adaptive reuse approach is given. On the basis of analysis results of experience in adaptive reuse of industrial architecture with new social functions general conclusions are developed.

  11. DEFACTO: A Design Environment for Adaptive Computing Technology

    National Research Council Canada - National Science Library

    Hall, Mary

    2003-01-01

    This report describes the activities of the DEFACTO project, a Design Environment for Adaptive Computing Technology funded under the DARPA Adaptive Computing Systems and Just-In-Time-Hardware programs...

  12. Conserved sex chromosomes across adaptively radiated anolis lizards

    Czech Academy of Sciences Publication Activity Database

    Rovatsos, M.; Altmanová, M.; Pokorná, Martina; Kratochvíl, L.

    2014-01-01

    Roč. 68, č. 7 (2014), s. 2079-2085 ISSN 0014-3820 R&D Projects: GA ČR GAP506/10/0718 Institutional support: RVO:67985904 Keywords : adaptive radiation * Anolis * reptiles Subject RIV: EG - Zoology Impact factor: 4.612, year: 2014

  13. Adaptation in the context of technology development and transfer

    DEFF Research Database (Denmark)

    Olhoff, Anne

    2015-01-01

    and transfer. It summarizes what technologies for adaptation are, how they relate to development, and what their role is in adaptation. It subsequently highlights a number of policy and research issues that could be important to inform future policy. The commentary has two key messages. First, it argues...... that informed policy decisions on technology development and transfer to enhance adaptation require systematic assessments of the findings in the theoretical and empirical literature. Second, in light of the potential for overlap between processes for adaptation and processes for technologies for adaptation......Starting from a summary of key developments under the United Nations Framework Convention on Climate Change (UNFCCC) related to adaptation and technologies, the commentary provides an initial review of the available literature relevant to adaptation in the context of technology development...

  14. Adaptive sports technology and biomechanics: prosthetics.

    Science.gov (United States)

    De Luigi, Arthur Jason; Cooper, Rory A

    2014-08-01

    With the technologic advances in medicine and an emphasis on maintaining physical fitness, the population of athletes with impairments is growing. It is incumbent upon health care practitioners to make every effort to inform these individuals of growing and diverse opportunities and to encourage safe exercise and athletic participation through counseling and education. Given the opportunities for participation in sports for persons with a limb deficiency, the demand for new, innovative prosthetic designs is challenging the clinical and technical expertise of the physician and prosthetist. When generating a prosthetic prescription, physicians and prosthetists should consider the needs and preferences of the athlete with limb deficiency, as well as the functional demands of the chosen sporting activity. The intent of this article is to provide information regarding the current advancements in the adaptive sports technology and biomechanics in the field of prosthetics, and to assist clinicians and their patients in facilitating participation in sporting activities. Copyright © 2014 American Academy of Physical Medicine and Rehabilitation. Published by Elsevier Inc. All rights reserved.

  15. Assessing the components of adaptive capacity to improve conservation and management efforts under global change.

    Science.gov (United States)

    Nicotra, Adrienne B; Beever, Erik A; Robertson, Amanda L; Hofmann, Gretchen E; O'Leary, John

    2015-10-01

    Natural-resource managers and other conservation practitioners are under unprecedented pressure to categorize and quantify the vulnerability of natural systems based on assessment of the exposure, sensitivity, and adaptive capacity of species to climate change. Despite the urgent need for these assessments, neither the theoretical basis of adaptive capacity nor the practical issues underlying its quantification has been articulated in a manner that is directly applicable to natural-resource management. Both are critical for researchers, managers, and other conservation practitioners to develop reliable strategies for assessing adaptive capacity. Drawing from principles of classical and contemporary research and examples from terrestrial, marine, plant, and animal systems, we examined broadly the theory behind the concept of adaptive capacity. We then considered how interdisciplinary, trait- and triage-based approaches encompassing the oft-overlooked interactions among components of adaptive capacity can be used to identify species and populations likely to have higher (or lower) adaptive capacity. We identified the challenges and value of such endeavors and argue for a concerted interdisciplinary research approach that combines ecology, ecological genetics, and eco-physiology to reflect the interacting components of adaptive capacity. We aimed to provide a basis for constructive discussion between natural-resource managers and researchers, discussions urgently needed to identify research directions that will deliver answers to real-world questions facing resource managers, other conservation practitioners, and policy makers. Directing research to both seek general patterns and identify ways to facilitate adaptive capacity of key species and populations within species, will enable conservation ecologists and resource managers to maximize returns on research and management investment and arrive at novel and dynamic management and policy decisions. © 2015 Society for

  16. Applied reproductive technologies and genetic resource banking for amphibian conservation.

    Science.gov (United States)

    Kouba, Andrew J; Vance, Carrie K

    2009-01-01

    As amphibian populations continue to decline, both government and non-government organisations are establishing captive assurance colonies to secure populations deemed at risk of extinction if left in the wild. For the most part, little is known about the nutritional ecology, reproductive biology or husbandry needs of the animals placed into captive breeding programs. Because of this lack of knowledge, conservation biologists are currently facing the difficult task of maintaining and reproducing these species. Academic and zoo scientists are beginning to examine different technologies for maintaining the genetic diversity of founder populations brought out of the wild before the animals become extinct from rapidly spreading epizootic diseases. One such technology is genetic resource banking and applied reproductive technologies for species that are difficult to reproduce reliably in captivity. Significant advances have been made in the last decade for amphibian assisted reproduction including the use of exogenous hormones for induction of spermiation and ovulation, in vitro fertilisation, short-term cold storage of gametes and long-term cryopreservation of spermatozoa. These scientific breakthroughs for a select few species will no doubt serve as models for future assisted breeding protocols and the increasing number of amphibians requiring conservation intervention. However, the development of specialised assisted breeding protocols that can be applied to many different families of amphibians will likely require species-specific modifications considering their wide range of reproductive modes. The purpose of this review is to summarise the current state of knowledge in the area of assisted reproduction technologies and gene banking for the conservation of amphibians.

  17. A new mechanism for energy conservation technology services

    Energy Technology Data Exchange (ETDEWEB)

    Yan, Feng

    1996-12-31

    In the ninth-five year plan of China, the socialist market economy model will be developed. In the stage of transferring from planning economy to market economy, the energy conservation technology services industry in China has met new challenges. Over the past ten to fifteen years, there has developed a new mechanism for financing energy efficiency investments in market economies. The process is simple. After inspecting an enterprise or an entity for energy saving opportunities, an Energy Service Company (ESCO) which business aimed at making money will review the recommended energy conservation opportunities with the enterprise or the entity (user) and implement those measures acceptable to the user at no front end cost to the user. The ESCO then guarantees that the energy savings will cover the cost of the capital renovations using the Performance Contracting.

  18. Solar energy and conservation technologies for Caribbean Tourist Facilities (CTF)

    Science.gov (United States)

    The primary objectives of the Caribbean Tourist Facilities (CTF) project were to develop and publish materials and conduct workshops on solar energy and conservation technologies that would directly address the needs and interests of tourist facilities in the Caribbean basin. Past contacts with the Caribbean and US tourist industries indicated that decision-makers remained unconvinced that renewable technologies could have a significant impact on development and operation costs or that renewable energy products and services suited their needs. In order to assure that the materials and programs developed were responsive to the Caribbean tourist industry and U.S. conservation and renewable energy industries, marketing research with potential end users and the organizations and associations that serve those users was included as an underlying task in the project. The tasks outlined in the CTF Statement of Work included conference planning, gathering of field data, development of educational materials, and conduct of workshop(s). In addition to providing a chronicle of the fulfillment of those tasks, this final report includes suggestions for distributing the documents developed during the project, venues for future workshops, and other technology transfer and market influence strategies.

  19. Assessing the components of adaptive capacity to improve conservation and management efforts under global change

    Science.gov (United States)

    Nicotra, Adrienne; Beever, Erik; Robertson, Amanda; Hofmann, Gretchen; O’Leary, John

    2015-01-01

    Natural-resource managers and other conservation practitioners are under unprecedented pressure to categorize and quantify the vulnerability of natural systems based on assessment of the exposure, sensitivity, and adaptive capacity of species to climate change. Despite the urgent need for these assessments, neither the theoretical basis of adaptive capacity nor the practical issues underlying its quantification has been articulated in a manner that is directly applicable to natural-resource management. Both are critical for researchers, managers, and other conservation practitioners to develop reliable strategies for assessing adaptive capacity. Drawing from principles of classical and contemporary research and examples from terrestrial, marine, plant, and animal systems, we examined broadly the theory behind the concept of adaptive capacity. We then considered how interdisciplinary, trait- and triage-based approaches encompassing the oft-overlooked interactions among components of adaptive capacity can be used to identify species and populations likely to have higher (or lower) adaptive capacity. We identified the challenges and value of such endeavors and argue for a concerted interdisciplinary research approach that combines ecology, ecological genetics, and eco-physiology to reflect the interacting components of adaptive capacity. We aimed to provide a basis for constructive discussion between natural-resource managers and researchers, discussions urgently needed to identify research directions that will deliver answers to real-world questions facing resource managers, other conservation practitioners, and policy makers. Directing research to both seek general patterns and identify ways to facilitate adaptive capacity of key species and populations within species, will enable conservation ecologists and resource managers to maximize returns on research and management investment and arrive at novel and dynamic management and policy decisions.

  20. Essentials of energy technology sources, transport, storage, conservation

    CERN Document Server

    Fricke, Jochen

    2013-01-01

    An in-depth understanding of energy technology, sources, conversion, storage, transport and conservation is crucial for developing a sustainable and economically viable energy infrastructure. This need, for example, is addressed in university courses with a special focus on the energy mix of renewable and depletable energy resources. Energy makes our lives comfortable, and the existence of amenities such as heaters, cars, warm water, household appliances and electrical light is characteristic for a developed economy. Supplying the industrial or individual energy consumer with energy 24 hours

  1. Studying citizen science through adaptive management and learning feedbacks as mechanisms for improving conservation.

    Science.gov (United States)

    Jordan, Rebecca; Gray, Steven; Sorensen, Amanda; Newman, Greg; Mellor, David; Newman, Greg; Hmelo-Silver, Cindy; LaDeau, Shannon; Biehler, Dawn; Crall, Alycia

    2016-06-01

    Citizen science has generated a growing interest among scientists and community groups, and citizen science programs have been created specifically for conservation. We examined collaborative science, a highly interactive form of citizen science, which we developed within a theoretically informed framework. In this essay, we focused on 2 aspects of our framework: social learning and adaptive management. Social learning, in contrast to individual-based learning, stresses collaborative and generative insight making and is well-suited for adaptive management. Adaptive-management integrates feedback loops that are informed by what is learned and is guided by iterative decision making. Participants engaged in citizen science are able to add to what they are learning through primary data collection, which can result in the real-time information that is often necessary for conservation. Our work is particularly timely because research publications consistently report a lack of established frameworks and evaluation plans to address the extent of conservation outcomes in citizen science. To illustrate how our framework supports conservation through citizen science, we examined how 2 programs enacted our collaborative science framework. Further, we inspected preliminary conservation outcomes of our case-study programs. These programs, despite their recent implementation, are demonstrating promise with regard to positive conservation outcomes. To date, they are independently earning funds to support research, earning buy-in from local partners to engage in experimentation, and, in the absence of leading scientists, are collecting data to test ideas. We argue that this success is due to citizen scientists being organized around local issues and engaging in iterative, collaborative, and adaptive learning. © 2016 Society for Conservation Biology.

  2. Adaptive security systems -- Combining expert systems with adaptive technologies

    International Nuclear Information System (INIS)

    Argo, P.; Loveland, R.; Anderson, K.

    1997-01-01

    The Adaptive Multisensor Integrated Security System (AMISS) uses a variety of computational intelligence techniques to reason from raw sensor data through an array of processing layers to arrive at an assessment for alarm/alert conditions based on human behavior within a secure facility. In this paper, the authors give an overview of the system and briefly describe some of the major components of the system. This system is currently under development and testing in a realistic facility setting

  3. The climate adaptation programs and activities of the Yellowstone to Yukon Conservation Initiative

    Science.gov (United States)

    Wendy L. Francis

    2011-01-01

    The Yellowstone to Yukon Conservation Initiative (Y2Y) is an innovative transboundary effort to protect biodiversity and facilitate climate adaptation by linking large protected core areas through compatible land uses on matrix lands. The Y2Y organization acts as the keeper of the Y2Y vision and implements two interconnected programs - Science and Action, and Vision...

  4. Technologies for climate change adaptation. Coastal erosion and flooding

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, X. (ed.) (UNEP Risoe Centre, Roskilde (Denmark)); Linham, M.M.; Nicholls, R.J. (Univ. of Southampton (United Kingdom))

    2010-11-15

    This guidebook is intended to be a practical tool for use by coastal zone managers in developing countries. The aim is to provide best practice guidance and assist these managers in assessing their evolving adaptation needs and help them to prepare action plans for adapting to climate change in the coastal zone. The guidebook first reviews the main physical and societal impacts of climate change in the coastal zone. It then considers the process of adaptation to erosion and flooding/inundation hazards where major impacts may occur and a range of adaptation technologies are best developed. Thirteen of these adaptation technologies are presented in this guide, representing examples of the protect, accommodate or (planned) retreat approaches to adaptation. While this does not represent an exhaustive list of the adaptation technologies that are available, these technologies are among those most widely used/considered in the coastal zone today. All the technologies considered are relevant to climate change adaptation and collectively, more widespread application is expected in the future under climate change and rising sea levels. For each adaptation technology the following issues are addressed: (1) definition and description; (2) technical advantages and disadvantages; (3) institutional and organisational requirements; (4) potential costs and opportunities; and (5) barriers to implementation; followed by a case study example. We have endeavoured to include developing country examples wherever possible, but as there is less activity and less documentation of developing world projects and some technologies are barely used in the developing world, this is not always possible. Knowledge and capacity building requirements and monitoring technologies are considered and contrasted across all 13 adaptation technologies. Finally, more detailed sources are indicated. Each adaptation technology has widely varying advantages and disadvantages. As such, selection of measures

  5. Development models and technological innovation. A conservative revolution

    Directory of Open Access Journals (Sweden)

    Carla Gras

    2016-12-01

    Full Text Available In Argentina, innovations related to biotechnologies were rapidly adopted while initially there was an absence of a large social debate. To understand this absence, the institutional framework which legitimized technological innovations must be addressed. This framework was undoubtedly one of the conditions of success of the dissemination of the agribusiness model. It´s unfolding also evidences the restructuring of local rural dominant classes that led to the emergency of new social actors. These were the “innovators” gathered in the Argentine Association of No-Tilling Farmers (or AAPRESID.  Here, we analyze how innovations were introduced and legitimated in Argentina. In contrast to what AAPRESID has termed as a “paradigmatic revolution”, we will characterize the introduction of biotechnologies in Argentine agriculture as a “conservative revolution”.

  6. Addressing potential local adaptation in species distribution models: implications for conservation under climate change

    Science.gov (United States)

    Hällfors, Maria Helena; Liao, Jishan; Dzurisin, Jason D. K.; Grundel, Ralph; Hyvärinen, Marko; Towle, Kevin; Wu, Grace C.; Hellmann, Jessica J.

    2016-01-01

    Species distribution models (SDMs) have been criticized for involving assumptions that ignore or categorize many ecologically relevant factors such as dispersal ability and biotic interactions. Another potential source of model error is the assumption that species are ecologically uniform in their climatic tolerances across their range. Typically, SDMs to treat a species as a single entity, although populations of many species differ due to local adaptation or other genetic differentiation. Not taking local adaptation into account, may lead to incorrect range prediction and therefore misplaced conservation efforts. A constraint is that we often do not know the degree to which populations are locally adapted, however. Lacking experimental evidence, we still can evaluate niche differentiation within a species' range to promote better conservation decisions. We explore possible conservation implications of making type I or type II errors in this context. For each of two species, we construct three separate MaxEnt models, one considering the species as a single population and two of disjunct populations. PCA analyses and response curves indicate different climate characteristics in the current environments of the populations. Model projections into future climates indicate minimal overlap between areas predicted to be climatically suitable by the whole species versus population-based models. We present a workflow for addressing uncertainty surrounding local adaptation in SDM application and illustrate the value of conducting population-based models to compare with whole-species models. These comparisons might result in more cautious management actions when alternative range outcomes are considered.

  7. Adaptive Hypermedia Educational System Based on XML Technologies.

    Science.gov (United States)

    Baek, Yeongtae; Wang, Changjong; Lee, Sehoon

    This paper proposes an adaptive hypermedia educational system using XML technologies, such as XML, XSL, XSLT, and XLink. Adaptive systems are capable of altering the presentation of the content of the hypermedia on the basis of a dynamic understanding of the individual user. The user profile can be collected in a user model, while the knowledge…

  8. Adaptive Red Teaming on Developmental Technologies

    Science.gov (United States)

    2015-09-01

    to place or carry explosives and shopkeepers could be selling stolen merchandise from blue cell or watching base activity for pattern of life...performance (Tech Factor 1), adaptability (Tech Factor 2), integration into common operational picture (Tech Factor 3), digital security (Tech Factor 4), and

  9. Adaptive and perceptual learning technologies in medical education and training.

    Science.gov (United States)

    Kellman, Philip J

    2013-10-01

    Recent advances in the learning sciences offer remarkable potential to improve medical education and maximize the benefits of emerging medical technologies. This article describes 2 major innovation areas in the learning sciences that apply to simulation and other aspects of medical learning: Perceptual learning (PL) and adaptive learning technologies. PL technology offers, for the first time, systematic, computer-based methods for teaching pattern recognition, structural intuition, transfer, and fluency. Synergistic with PL are new adaptive learning technologies that optimize learning for each individual, embed objective assessment, and implement mastery criteria. The author describes the Adaptive Response-Time-based Sequencing (ARTS) system, which uses each learner's accuracy and speed in interactive learning to guide spacing, sequencing, and mastery. In recent efforts, these new technologies have been applied in medical learning contexts, including adaptive learning modules for initial medical diagnosis and perceptual/adaptive learning modules (PALMs) in dermatology, histology, and radiology. Results of all these efforts indicate the remarkable potential of perceptual and adaptive learning technologies, individually and in combination, to improve learning in a variety of medical domains. Reprint & Copyright © 2013 Association of Military Surgeons of the U.S.

  10. A report from the second US/Japan workshop on global change research: Environmental response technologies (mitigation and adaptation). United States-Japan Science and Technology Agreement

    Energy Technology Data Exchange (ETDEWEB)

    Edgerton, S. [comp.] [National Science Foundation, Washington, DC (United States). Committee on Earth and Environmental Sciences; Mizuno, Tateki [comp.] [National Inst. for Resources and Environment, MITI (Japan)

    1993-12-31

    The Second US - Japan Workshop on Global Change: Environmental Response Technologies for Global Change was hosted by the Program on Resources at the East-West Center, in Honolulu, Hawaii on February 1--3, 1993, on behalf of the United States Committee on Earth and Environmental Sciences (CEES) of the Federal Coordinating Council for Science, Engineering, and Technology (FCCSET). This workshop brought together over fifty leading scientists from the two countries to review existing technologies and to identify needed research on the development of new technologies for mitigation and adaptation of global change. The Workshop was organized around three areas of research: (1) capture, fixation/utilization, and disposal of CO{sub 2} (e.g. CO{sub 2}, separation and capture technologies, ocean and land disposal of CO{sub 2}; (2) energy production and conservation technologies to reduce greenhouse gas emissions (e.g. combustion efficiency, non-carbon based energy technologies, energy conservation technologies); and (3) adaptation technologies and practices related to global climate change (e.g., adaptation responses of crops to climate change, adapting urban infrastructure for climate change). Priorities for joint research in each of these areas were discussed. Selected papers have been processed separately for inclusion in the Energy Science and Technology Database.

  11. Towards adaptive fire management for biodiversity conservation: Experience in South African National Parks

    Directory of Open Access Journals (Sweden)

    Brian W. van Wilgen

    2011-05-01

    Conservation implications: Significant challenges face the managers of fire-prone and fire adapted ecosystems, where the attainment of ecosystem goals may require approaches (like encouraging high-intensity fires at hot and dry times of the year that threaten societal goals related to safety. In addition, approaches to fire management have focused on encouraging particular fire patterns in the absence of a sound understanding of their ecological outcomes. Adaptive management offers a framework for addressing these issues, but will require higher levels of agreement, monitoring and assessment than have been the case to date.

  12. Conserving energy through new irrigation technologies. Technical briefing report

    Energy Technology Data Exchange (ETDEWEB)

    1982-07-01

    The benefits and applications of five irrigation technologies are explored: mobile drop-tube irrigation, computerized scheduling, reduced-pressure center pivots, well design and development, and automated gated-pipe systems. Perhaps the most promising of the new irrigation technologies is the low-energy, precision-application (LEPA) system. This mobile system used one-half the energy of conventional sprinkler systems and distributes water with greater efficiency through a series of low-pressure drop tubes suspended above the crop. Computerized methods of irrigation scheduling have been developed to help farmers conserve water and energy. Special computer programs determine when a crop needs water and how much to apply for optimal plant growth, thus preventing the unnecessary costs of pumping more water than the crop needs. Field test results show that replacing traditional scheduling methods of irrigation with computerized scheduling can reduce energy and water use by as much as 35%. The irrigation industry is actively promoting reduced-pressure water application methods, particularly for center-pivot systems. Reduced-pressure systems expend less energy but produce the same crop yields as conventional high-pressure systems, as long as excessive water runoff does not occur. If well design and development techniques are applied when a well is drilled into an unconsolidated acquifer, the well's life expectancy, as well as its operating efficiency, can increase, the later by as much as 40%.

  13. Technologies for climate change adaptation. The water sector

    Energy Technology Data Exchange (ETDEWEB)

    Lopez, T De [ed.; UNEP Risoe Centre, Roskilde (Denmark); Elliott, M; Armstrong, A; Lobuglio, J; Bartram, J [The Water Institute at the Univ. of North Carolina at Chapel Hill, Chapel Hill, NC (United States)

    2011-04-15

    This guidebook aims to provide expert information on the technologies most relevant for climate change adaptation in the water sector in developing countries. It is meant to be a practical tool for use by a broad range of stakeholders, including those in governmental agencies, water utilities, community water boards, non-governmental organizations, and private sector companies. Adaptation is an essential element of human response to climate change. The adverse impacts of climate change on the water sector will be experienced worldwide and are often projected to be most severe in resource-poor countries. Therefore, it is necessary to have access to a diverse array of adaptation technologies and practices that are appropriate and affordable in various contexts. The scale of these adaptation technologies/practices should range from the individual household level (e.g. household water treatment), to the community scale (e.g. rainwater collection in small reservoirs), to large facilities that can benefit a city or region (e.g. a desalination plant). The guidebook first reviews the projected impacts of climate change on the water sector. It then addresses the role of adaptation in the water sector and six typologies under which available strategies are categorized. Eleven technologies and practices are given detailed treatment in this guidebook and four others are covered briefly. While these do not constitute all of the adaptation technologies available in the water sector, they do represent many of the most important adaptation technologies for developing countries. For each of the 11 adaptation technologies and practices, the following are addressed: basic description, contribution to climate change and development, institutional and capacity building requirements, costs, barriers and opportunities for implementation, and extensive reference to external resources and case studies. The practical steps and appropriate contexts for implementation are covered in the

  14. Sewerage force adjustment technology for energy conservation in vacuum sanitation systems

    Science.gov (United States)

    Guo, Zhonghua; Li, Xiaoning; Kagawa, Toshiharu

    2013-03-01

    The vacuum sanitation is the safe and sound disposal approach of human excreta under the specific environments like flights, high speed trains and submarines. However, the propulsive force of current systems is not adjustable and the energy consumption does not adapt to the real time sewerage requirement. Therefore, it is important to study the sewerage force adjustment to improve the energy efficiency. This paper proposes an energy conservation design in vacuum sanitation systems with pneumatic ejector circuits. The sewerage force is controlled by changing the systematic vacuum degree according to the amount of the excreta. In particular, the amount of the excreta is tested by liquid level sensor and mass sensor. According to the amount of the excreta, the relationship between the excreta amount and the sewerage force is studied to provide proper propulsive force. In the other aspect, to provide variable vacuum degrees for different sanitation requirements, the suction and discharge system is designed with pneumatic vacuum ejector. On the basis of the static flow-rate characteristics and the vacuum generation model, the pressure response in the ejector circuit is studied by using the static flow rate characteristics of the ejector and air status equation. The relationship is obtained between supplied compressed air and systematic vacuum degree. When the compressed air is supplied to the ejector continuously, the systematic vacuum degree increases until the vacuum degree reaches the extreme value. Therefore, the variable systematic vacuum degree is obtained by controlling the compressed air supply of the ejector. To verify the effect of energy conservation, experiments are carried out in the artificial excreta collection, and the variable vacuum-degree design saves more than 30% of the energy supply. The energy conservation is realized effectively in the new vacuum sanitation systems with good application prospect. The proposed technology provides technological

  15. Application of energy conservation technologies in Indian industries

    International Nuclear Information System (INIS)

    Zubair, K.M.

    1992-01-01

    The quadrupling of oil prices in 1973 signaled the beginning of a crises period for the oil importing countries. It hampered the economic growth of developed and developing countries alike. The pace of industrialization slowed down, recession set in and the oil importing developing nations found their balance of payment situation steadily going worse. The second increase of oil prices in 1979 further compounded the problems. It did seem that the problem of economic growth and increasing debt burden was intractable as far as developing nations were concerned. Behind this turmoil were the faint stirrings of alternative actions that sought to wean the world from its oil and fossil fuel dominated economies. These alternatives ranged from harnessing renewable energy sources, such as solar, wind and biomass to implementing end-use energy efficiency strategies. A major lesson of the oil crunch era was that energy efficiency is tangible resource by itself that competes economically with contemporary energy supply options. In addition to this, four major national priorities, viz, economic competitiveness, utilization of scare capital for development, environmental quality and energy security through oil dependence provided an urgent rationale for saving energy. While conservation consciousness has already taken roots in Pakistan industry, it needs to be nurtured and gains need to be consolidated. The need of the hour is to take stock of the situation elsewhere, particularly in similar geographical and socio-economic situations, and plan for an energy efficient tomorrow. This article attempts to delineate the notable developments that have taken place in the application of energy conservation technologies in the Indian industries. These efforts have had a salutary effect on the Indian value added sector which was saddled with old plant and machinery designed in the era of cheap energy. (author)

  16. Scientifically defensible fish conservation and recovery plans: Addressing diffuse threats and developing rigorous adaptive management plans

    Science.gov (United States)

    Maas-Hebner, Kathleen G.; Schreck, Carl B.; Hughes, Robert M.; Yeakley, Alan; Molina, Nancy

    2016-01-01

    We discuss the importance of addressing diffuse threats to long-term species and habitat viability in fish conservation and recovery planning. In the Pacific Northwest, USA, salmonid management plans have typically focused on degraded freshwater habitat, dams, fish passage, harvest rates, and hatchery releases. However, such plans inadequately address threats related to human population and economic growth, intra- and interspecific competition, and changes in climate, ocean, and estuarine conditions. Based on reviews conducted on eight conservation and/or recovery plans, we found that though threats resulting from such changes are difficult to model and/or predict, they are especially important for wide-ranging diadromous species. Adaptive management is also a critical but often inadequately constructed component of those plans. Adaptive management should be designed to respond to evolving knowledge about the fish and their supporting ecosystems; if done properly, it should help improve conservation efforts by decreasing uncertainty regarding known and diffuse threats. We conclude with a general call for environmental managers and planners to reinvigorate the adaptive management process in future management plans, including more explicitly identifying critical uncertainties, implementing monitoring programs to reduce those uncertainties, and explicitly stating what management actions will occur when pre-identified trigger points are reached.

  17. Stabilized Conservative Level Set Method with Adaptive Wavelet-based Mesh Refinement

    Science.gov (United States)

    Shervani-Tabar, Navid; Vasilyev, Oleg V.

    2016-11-01

    This paper addresses one of the main challenges of the conservative level set method, namely the ill-conditioned behavior of the normal vector away from the interface. An alternative formulation for reconstruction of the interface is proposed. Unlike the commonly used methods which rely on the unit normal vector, Stabilized Conservative Level Set (SCLS) uses a modified renormalization vector with diminishing magnitude away from the interface. With the new formulation, in the vicinity of the interface the reinitialization procedure utilizes compressive flux and diffusive terms only in the normal direction to the interface, thus, preserving the conservative level set properties, while away from the interfaces the directional diffusion mechanism automatically switches to homogeneous diffusion. The proposed formulation is robust and general. It is especially well suited for use with adaptive mesh refinement (AMR) approaches due to need for a finer resolution in the vicinity of the interface in comparison with the rest of the domain. All of the results were obtained using the Adaptive Wavelet Collocation Method, a general AMR-type method, which utilizes wavelet decomposition to adapt on steep gradients in the solution while retaining a predetermined order of accuracy.

  18. Genes involved in complex adaptive processes tend to have highly conserved upstream regions in mammalian genomes

    Directory of Open Access Journals (Sweden)

    Kohane Isaac

    2005-11-01

    Full Text Available Abstract Background Recent advances in genome sequencing suggest a remarkable conservation in gene content of mammalian organisms. The similarity in gene repertoire present in different organisms has increased interest in studying regulatory mechanisms of gene expression aimed at elucidating the differences in phenotypes. In particular, a proximal promoter region contains a large number of regulatory elements that control the expression of its downstream gene. Although many studies have focused on identification of these elements, a broader picture on the complexity of transcriptional regulation of different biological processes has not been addressed in mammals. The regulatory complexity may strongly correlate with gene function, as different evolutionary forces must act on the regulatory systems under different biological conditions. We investigate this hypothesis by comparing the conservation of promoters upstream of genes classified in different functional categories. Results By conducting a rank correlation analysis between functional annotation and upstream sequence alignment scores obtained by human-mouse and human-dog comparison, we found a significantly greater conservation of the upstream sequence of genes involved in development, cell communication, neural functions and signaling processes than those involved in more basic processes shared with unicellular organisms such as metabolism and ribosomal function. This observation persists after controlling for G+C content. Considering conservation as a functional signature, we hypothesize a higher density of cis-regulatory elements upstream of genes participating in complex and adaptive processes. Conclusion We identified a class of functions that are associated with either high or low promoter conservation in mammals. We detected a significant tendency that points to complex and adaptive processes were associated with higher promoter conservation, despite the fact that they have emerged

  19. Entangled judgments: expert preferences for adapting biodiversity conservation to climate change.

    Science.gov (United States)

    Hagerman, Shannon M; Satterfield, Terre

    2013-11-15

    A major challenge facing conservation experts is how to adapt biodiversity planning and practice to the impacts of climate change. To date, most commonly advocated adaptation actions mirror conventional approaches (e.g. protected areas) despite decades of concern regarding their efficacy and widespread discussion of less conventional, interventionist actions. This survey of 160 experts (scientists and practitioners with specialized knowledge of the implications of climate change for biodiversity conservation) seeks to explain this deep incongruity. Specifically, we quantify current preferences for a diverse set of adaptation actions, and examine the choice logics that underpin them. We find near unanimous agreement in principle with the need for extensive active management and restoration interventions given climate change. However, when interventionist actions are provided as options alongside conventional actions, experts overwhelming prefer the latter. Four hypotheses, developed by linking the conservation adaptation literature with that of preference formation and risk and decision making, explore enduring preferences for conventional actions. They are (1) judged most ecologically effective, least risky and best understood; (2) linked with pro-ecological worldviews, marked by positive affective feelings, and an aversion to the hubris of managing nature; (3) a function of trust in biodiversity governance; and/or (4) driven by demographic factors such as gender. Overall, we find that experts prefer conventional over unconventional actions because they are viewed as relatively more effective and less risky from an ecological point of view, and because they are linked with positive affect ratings, and worldviews that are strongly pro-ecological. We discuss the roles of value-based and affective cues in shaping policy outcomes for adaptation specifically, and sustainable resource management more broadly. Copyright © 2013 Elsevier Ltd. All rights reserved.

  20. Conservative adaptivity and two-way self-nesting using discrete wavelets

    Science.gov (United States)

    Dubos, Thomas

    2010-05-01

    In simulating atmosphere and oceans, multiscale modelling is desirable to track high-intensity weather patterns, to investigate the interactions between the various spatio-temporal scales of the climate system, and to perform assessments of climate change at scales small enough to derive impacts on society and ecosystems. The mainstream approach to multiscale modelling is to nest a fine, limited-area model into a coarse, global model. These models are then coupled, either one-way or two-way, in order to combine the global coverage of the global model and the fine details of the fine model. In the long simulations typical of climate studies, initial conditions are unimportant, except for the few quantities like mass that are exactly conserved. In this context it is crucial that numerical models conserve at least mass exactly at the discrete level. However even with elaborate strategies like adaptive mesh refinement (AMR) conservation is not straightforwardly achieved. Although the continuous wavelet transform has become a standard tool of geophysical data analysis, it is less known that discrete wavelets and the associated transforms provide the basis for spatially adaptive numerical methods. Such methods are now well-developed in the fluid dynamics community. Since they allow spatial adaptivity, they can also be seen as two-way self-nesting methods. However since they are not specifically designed for geophysical purposes they are usually not exactly conservative. I present a fairly general framework in which a wavelet-based layer is added to an existing conservative scheme (finite-volume or finite-difference) to make it spatially adaptive without breaking the exact conservation of linear invariants. Discrete wavelet transforms involve an upscaling operation by which fields are transferred from a fine grid to a coarser grid with half the resolution. The method requires that mass fluxes be upscaled in a way that is consistent with the upscaling of mass. This

  1. Adapting the Accreditation Procedures to a New Educational Technology

    DEFF Research Database (Denmark)

    Cojocaru, Dorian; Tudor Tanasie, Razvan; Friesel, Anna

    2017-01-01

    , Technology, Engineering and Math (STEM) topics, including: technology solutions, infrastructure, activities, assessment, curricula, and classroom furniture and environment designs. The project addresses three different learning contexts (post-secondary design studios, post-secondary engineering sciences...... classrooms, and secondary-level high school STEM learning environments) across four national settings in the EU. In the upper defined context, this paper deals with the problem of adapting the accreditation of the engineering programs to the new educational technologies....

  2. Adapting the Accreditation Procedures to a New Educational Technology

    DEFF Research Database (Denmark)

    Cojocaru, Dorian; Tudor Tanasie, Razvan; Friesel, Anna

    2016-01-01

    , Technology, Engineering and Math (STEM) topics, including: technology solutions, infrastructure, activities, assessment, curricula, and classroom furniture and environment designs. The project addresses three different learning contexts (post-secondary design studios, post-secondary engineering sciences...... classrooms, and secondary-level high school STEM learning environments) across four national settings in the EU. In the upper defined context, this paper deals with the problem of adapting the accreditation of the engineering programs to the new educational technologies....

  3. The potential of cryopreservation and reproductive technologies for animal genetic resources conservation strategies

    NARCIS (Netherlands)

    Hiemstra, S.J.; Lende, van der T.; Woelders, H.

    2006-01-01

    This chapter focuses on ex situ conservation. An overview of the state of the art cryopreservation and reproductive technology for farm animals and fish is followed by a discussion on the implications of ex situ conservation strategies. Ex situ conservation of genetic material from livestock and

  4. Postharvest technologies for mangosteen (Garcinia mangostana L. conservation

    Directory of Open Access Journals (Sweden)

    Maria Fernanda Pontes Penteado Moretzsohn de Castro

    2012-12-01

    Full Text Available The application of technologies to extend the postharvest life of mangosteen fruit was studied and compared to storage at 25 °C/70-75%R.H (25 °C control treatment. The fruits were packed in expanded polystyrene (EPS trays (5 fruits/tray. Five treatments were carried out at 13 °C/ 90-95% RH: application of carnauba wax coating, lecithin + CMC (carboxymethyl cellulose coating, 50 µm LDPE (low density polyethylene film coating, 13 µm PVC (Polyvinyl chloride, and non-coated sample (13 °C control treatment. Physicochemical analyses were performed twice a week. A statistical design was completely randomized with 8 repetitions for each treatment plus the control treatment. The results were submitted to variance analysis, and the averages compared by the Tukey test at 5% probability. Among the quality parameters analyzed, more significant differences were observed for weight loss, texture, and peel moisture content. The results showed that the maximum storage period for mangosteen at 25 °C is two weeks; while storage at13 °C can guarantee the conservation of this fruit for 25 days. Therefore, the treatment at 13 °C/90-95% RH without the use of coatings and films was more effective and economical.

  5. Identification of conserved drought-adaptive genes using a cross-species meta-analysis approach.

    Science.gov (United States)

    Shaar-Moshe, Lidor; Hübner, Sariel; Peleg, Zvi

    2015-05-03

    Drought is the major environmental stress threatening crop-plant productivity worldwide. Identification of new genes and metabolic pathways involved in plant adaptation to progressive drought stress at the reproductive stage is of great interest for agricultural research. We developed a novel Cross-Species meta-Analysis of progressive Drought stress at the reproductive stage (CSA:Drought) to identify key drought adaptive genes and mechanisms and to test their evolutionary conservation. Empirically defined filtering criteria were used to facilitate a robust integration of 17 deposited microarray experiments (148 arrays) of Arabidopsis, rice, wheat and barley. By prioritizing consistency over intensity, our approach was able to identify 225 differentially expressed genes shared across studies and taxa. Gene ontology enrichment and pathway analyses classified the shared genes into functional categories involved predominantly in metabolic processes (e.g. amino acid and carbohydrate metabolism), regulatory function (e.g. protein degradation and transcription) and response to stimulus. We further investigated drought related cis-acting elements in the shared gene promoters, and the evolutionary conservation of shared genes. The universal nature of the identified drought-adaptive genes was further validated in a fifth species, Brachypodium distachyon that was not included in the meta-analysis. qPCR analysis of 27, randomly selected, shared orthologs showed similar expression pattern as was found by the CSA:Drought.In accordance, morpho-physiological characterization of progressive drought stress, in B. distachyon, highlighted the key role of osmotic adjustment as evolutionary conserved drought-adaptive mechanism. Our CSA:Drought strategy highlights major drought-adaptive genes and metabolic pathways that were only partially, if at all, reported in the original studies included in the meta-analysis. These genes include a group of unclassified genes that could be involved

  6. Energy-conserving mechanisms as adaptation to undernutrition and water deprivation in the African Zebu

    International Nuclear Information System (INIS)

    Finch, V.A.; King, J.M.

    1982-01-01

    In a study designed to simulate pastoral cattle management practices on marginal and rangelands in Kenya, the physiological adaptations for energy conservation were investigated in African Zebu cattle during a period of undernutrition and water deprivation. In experimental design, the food available to cattle was restricted to 50% of maintenance, watering reduced to every 2 d and distances walked increased from 8 to 16 km/d. Restricting food for nearly 3 months resulted in a 13-14% weight loss in cattle. A 2-day watering regime did not decrease food intake. Cattle that walked the longer distances lost slightly more weight but not significantly more. There was a significant overall reduction in water requirements. Slowing water turnover is seen as adaptive in a water-limited environment. The water turnover rate was determined using the tritiated water dilution technique. Higher solar intensities increased water turnover somewhat, as did extending walking distances. The resting metabolic rate of cattle on restricted food and water was reduced to 30% below that of well-fed and daily watered cattle. This reduction in metabolic requirements would result in conserving energy in dry seasons. Cattle became more thermolabile when offered smaller quantities of food. A heat debt was incurred at night and sweating rates were regulated at low levels during the day, resulting in heat storage. It is suggested that this is a mechanism by which energy is conserved through increasing thermogenesis to maintain body temperature within the normal range

  7. Adaptation of Australia’s Marine Ecosystems to Climate Change: Using Science to Inform Conservation Management

    Directory of Open Access Journals (Sweden)

    Johanna E. Johnson

    2014-01-01

    Full Text Available The challenges that climate change poses for marine ecosystems are already manifesting in impacts at the species, population, and community levels in Australia, particularly in Tasmania and tropical northern Australia. Many species and habitats are already under threat as a result of human activities, and the additional pressure from climate change significantly increases the challenge for marine conservation and management. Climate change impacts are expected to magnify as sea surface temperatures, ocean chemistry, ocean circulation, sea level, rainfall, and storm patterns continue to change this century. In particular, keystone species that form the foundation of marine habitats, such as coral reefs, kelp beds, and temperate rocky reefs, are projected to pass thresholds with subsequent implications for communities and ecosystems. This review synthesises recent science in this field: the observed impacts and responses of marine ecosystems to climate change, ecological thresholds of change, and strategies for marine conservation to promote adaptation. Increasing observations of climate-related impacts on Australia’s marine ecosystems—both temperate and tropical—are making adaptive management more important than ever before. Our increased understanding of the impacts and responses of marine ecosystems to climate change provides a focus for “no-regrets” adaptations that can be implemented now and refined as knowledge improves.

  8. Employees Technology Usage Adaptation Impact on Companies’ Logistics Service Performance

    Directory of Open Access Journals (Sweden)

    A. Zafer ACAR

    2018-01-01

    Full Text Available The information technology (IT capability of companies is one of the determinants of their competitive power. However, IT outputs depend on employees intentions to use them. As a technological investment Port automation systems are widely used in container terminals. Therefore behavioral intention in the usage of various IT applications is one of the important factors that may affect logistics service performance. This study aims to explore the employees' technology usage adaptation impact on the logistics service performance of ports. In this context, the behavioral intentions of employees who use port automation systems are investigated using the Technological Acceptance Model.

  9. Conservation

    NARCIS (Netherlands)

    Noteboom, H.P.

    1985-01-01

    The IUCN/WWF Plants Conservation Programme 1984 — 1985. World Wildlife Fund chose plants to be the subject of their fund-raising campaign in the period 1984 — 1985. The objectives were to: 1. Use information techniques to achieve the conservation objectives of the Plants Programme – to save plants;

  10. Conservation.

    Science.gov (United States)

    National Audubon Society, New York, NY.

    This set of teaching aids consists of seven Audubon Nature Bulletins, providing the teacher and student with informational reading on various topics in conservation. The bulletins have these titles: Plants as Makers of Soil, Water Pollution Control, The Ground Water Table, Conservation--To Keep This Earth Habitable, Our Threatened Air Supply,…

  11. Shape Morphing Adaptive Radiator Technology (SMART) for Variable Heat Rejection

    Science.gov (United States)

    Erickson, Lisa

    2016-01-01

    The proposed technology leverages the temperature dependent phase change of shape memory alloys (SMAs) to drive the shape of a flexible radiator panel. The opening/closing of the radiator panel, as a function of temperature, passively adapts the radiator's rate of heat rejection in response to a vehicle's needs.

  12. Parks, people, and change: the importance of multistakeholder engagement in adaptation planning for conserved areas

    Directory of Open Access Journals (Sweden)

    Corrine N. Knapp

    2014-12-01

    Full Text Available Climate change challenges the traditional goals and conservation strategies of protected areas, necessitating adaptation to changing conditions. Denali National Park and Preserve (Denali in south central Alaska, USA, is a vast landscape that is responding to climate change in ways that will impact both ecological resources and local communities. Local observations help to inform understanding of climate change and adaptation planning, but whose knowledge is most important to consider? For this project we interviewed long-term Denali staff, scientists, subsistence community members, bus drivers, and business owners to assess what types of observations each can contribute, how climate change is impacting each, and what they think the National Park Service should do to adapt. The project shows that each type of long-term observer has different types of observations, but that those who depend more directly on natural resources for their livelihoods have more and different observations than those who do not. These findings suggest that engaging multiple groups of stakeholders who interact with the park in distinct ways adds substantially to the information provided by Denali staff and scientists and offers a broader foundation for adaptation planning. It also suggests that traditional protected area paradigms that fail to learn from and foster appropriate engagement of people may be maladaptive in the context of climate change.

  13. An efficient adaptive arithmetic coding image compression technology

    International Nuclear Information System (INIS)

    Wang Xing-Yuan; Yun Jiao-Jiao; Zhang Yong-Lei

    2011-01-01

    This paper proposes an efficient lossless image compression scheme for still images based on an adaptive arithmetic coding compression algorithm. The algorithm increases the image coding compression rate and ensures the quality of the decoded image combined with the adaptive probability model and predictive coding. The use of adaptive models for each encoded image block dynamically estimates the probability of the relevant image block. The decoded image block can accurately recover the encoded image according to the code book information. We adopt an adaptive arithmetic coding algorithm for image compression that greatly improves the image compression rate. The results show that it is an effective compression technology. (electromagnetism, optics, acoustics, heat transfer, classical mechanics, and fluid dynamics)

  14. Barriers to the adoption of energy-conserving technologies in the textile industry

    Energy Technology Data Exchange (ETDEWEB)

    Evans, A.R.; Zussman, S.K.

    1979-09-01

    An overview of the textile industry and a discussion of energy-conserving technologies currently available at the pilot-demonstration stage are presented. Existing and potential barriers to the adoption of these technologies in the textile industry identified are: economic; technical acceptance; conflict between commitments of capital for compliance with environmental and health regulations and for investment in energy conservation measures; and a lack of information and technical expertise. Possible measures to eliminate barriers to the implementation of energy-conserving technologies are discussed. (MCW)

  15. Soil and water conservation on Central American hillsides: if more technologies is the answer, what is the question?

    Directory of Open Access Journals (Sweden)

    Jon Hellin

    2016-05-01

    Full Text Available Climate change is likely to lead to increased water scarcity in the coming decades and to changes in patterns of precipitation. The result will be more short-term crop failures and long-term production declines. Improved soil management is key to climate change adaptation and mitigation efforts. There is growing interest in the promotion of climate smart agricultural practices. Many of these are the same practices that were promoted in the 1980s and 1990s under the guise of soil and water conservation. Farmer non-adoption of soil conservation technologies was rife and suggests that different approaches are needed today. Much can be learnt from these past endeavors to ensure that current efforts are better designed and implemented. We use the example of Central America to highlight some of these lessons and suggest alternative ways forward. Technology per se is not the limiting factor; many suitable technologies and practices are extant. What is required is a more nuanced approach to soil conservation efforts. There is a need to focus less on capturing soil once it has been eroded, via the use of cross-slope soil conservation practices, and more on improving soil quality of the soil that remains through improved soil cover. It is also critical to understand farming systems as a whole i.e. the full range of interlinked activities and the multiplicity of goals that farm households pursue. Furthermore, it is important to engage farmers as active players in conservation efforts rather than passive adopters of technologies, and to adopt a board value chain approach and engage a plethora of value chain actors (researchers, extension agents, equipment manufacturers, input suppliers, farmers, traders, and processors in an agricultural innovation system.

  16. Technological choices and development: the energy conservation case in the Tunisian industry

    International Nuclear Information System (INIS)

    Sellami, H.

    1988-01-01

    The technological choices for an industrial development, especially in a developing country such as Tunisia, may be determined by two opposite principles: the appropriate technologies and the technological short cuts. The methodological approach presented here is based on a comparison of the technological choices for energy conservation in France and in Tunisia. The main energy consuming industrial sectors are analyzed for their technology use and their relative energy consumptions

  17. The Effect of Green Payments on the Diffusion of Conservation Technologies

    OpenAIRE

    Hendricks, Nathan P.

    2010-01-01

    The benefits from green payments for the adoption of a conservation technology or practice are reduced if the technology would have eventually been adopted regardless of the green payment. This source of additionality is likely a significant concern for some technologies subsidized by EQIP.

  18. Land degradation and adoption of soil conservation technologies ...

    African Journals Online (AJOL)

    The study investigates the causes of land degradation, and adoption of soil conservation practices using a two-stage decision making process. The data for the study were collected with the aid of structured questionnaire and analyzed with descriptive analysis, difference regression equation and simultaneous probit model.

  19. Conservation of leather historical object by nano technology in ...

    African Journals Online (AJOL)

    This paper examines the conservation of Antibacterial by Nano materials in the manufacture of leather and the implication of such a processes deteriorated of aging leather. As a sample study to improve this process historical cover book is used. Experimental methods are SEM EDX, Cultural Bacterial, Nano materials such ...

  20. The Contextualized Technology Adaptation Process (CTAP): Optimizing Health Information Technology to Improve Mental Health Systems.

    Science.gov (United States)

    Lyon, Aaron R; Wasse, Jessica Knaster; Ludwig, Kristy; Zachry, Mark; Bruns, Eric J; Unützer, Jürgen; McCauley, Elizabeth

    2016-05-01

    Health information technologies have become a central fixture in the mental healthcare landscape, but few frameworks exist to guide their adaptation to novel settings. This paper introduces the contextualized technology adaptation process (CTAP) and presents data collected during Phase 1 of its application to measurement feedback system development in school mental health. The CTAP is built on models of human-centered design and implementation science and incorporates repeated mixed methods assessments to guide the design of technologies to ensure high compatibility with a destination setting. CTAP phases include: (1) Contextual evaluation, (2) Evaluation of the unadapted technology, (3) Trialing and evaluation of the adapted technology, (4) Refinement and larger-scale implementation, and (5) Sustainment through ongoing evaluation and system revision. Qualitative findings from school-based practitioner focus groups are presented, which provided information for CTAP Phase 1, contextual evaluation, surrounding education sector clinicians' workflows, types of technologies currently available, and influences on technology use. Discussion focuses on how findings will inform subsequent CTAP phases, as well as their implications for future technology adaptation across content domains and service sectors.

  1. The Contextualized Technology Adaptation Process (CTAP): Optimizing Health Information Technology to Improve Mental Health Systems

    Science.gov (United States)

    Lyon, Aaron R.; Wasse, Jessica Knaster; Ludwig, Kristy; Zachry, Mark; Bruns, Eric J.; Unützer, Jürgen; McCauley, Elizabeth

    2015-01-01

    Health information technologies have become a central fixture in the mental healthcare landscape, but few frameworks exist to guide their adaptation to novel settings. This paper introduces the Contextualized Technology Adaptation Process (CTAP) and presents data collected during Phase 1 of its application to measurement feedback system development in school mental health. The CTAP is built on models of human-centered design and implementation science and incorporates repeated mixed methods assessments to guide the design of technologies to ensure high compatibility with a destination setting. CTAP phases include: (1) Contextual evaluation, (2) Evaluation of the unadapted technology, (3) Trialing and evaluation of the adapted technology, (4) Refinement and larger-scale implementation, and (5) Sustainment through ongoing evaluation and system revision. Qualitative findings from school-based practitioner focus groups are presented, which provided information for CTAP Phase 1, contextual evaluation, surrounding education sector clinicians’ workflows, types of technologies currently available, and influences on technology use. Discussion focuses on how findings will inform subsequent CTAP phases, as well as their implications for future technology adaptation across content domains and service sectors. PMID:25677251

  2. Microscope and spectacle: on the complexities of using new visual technologies to communicate about wildlife conservation.

    Science.gov (United States)

    Verma, Audrey; van der Wal, René; Fischer, Anke

    2015-11-01

    Wildlife conservation-related organisations increasingly employ new visual technologies in their science communication and public engagement efforts. Here, we examine the use of such technologies for wildlife conservation campaigns. We obtained empirical data from four UK-based organisations through semi-structured interviews and participant observation. Visual technologies were used to provide the knowledge and generate the emotional responses perceived by organisations as being necessary for motivating a sense of caring about wildlife. We term these two aspects 'microscope' and 'spectacle', metaphorical concepts denoting the duality through which these technologies speak to both the cognitive and the emotional. As conservation relies on public support, organisations have to be seen to deliver information that is not only sufficiently detailed and scientifically credible but also spectacular enough to capture public interest. Our investigation showed that balancing science and entertainment is a difficult undertaking for wildlife-related organisations as there are perceived risks of contriving experiences of nature and obscuring conservation aims.

  3. Adaptive Optics Technology for High-Resolution Retinal Imaging

    Science.gov (United States)

    Lombardo, Marco; Serrao, Sebastiano; Devaney, Nicholas; Parravano, Mariacristina; Lombardo, Giuseppe

    2013-01-01

    Adaptive optics (AO) is a technology used to improve the performance of optical systems by reducing the effects of optical aberrations. The direct visualization of the photoreceptor cells, capillaries and nerve fiber bundles represents the major benefit of adding AO to retinal imaging. Adaptive optics is opening a new frontier for clinical research in ophthalmology, providing new information on the early pathological changes of the retinal microstructures in various retinal diseases. We have reviewed AO technology for retinal imaging, providing information on the core components of an AO retinal camera. The most commonly used wavefront sensing and correcting elements are discussed. Furthermore, we discuss current applications of AO imaging to a population of healthy adults and to the most frequent causes of blindness, including diabetic retinopathy, age-related macular degeneration and glaucoma. We conclude our work with a discussion on future clinical prospects for AO retinal imaging. PMID:23271600

  4. Nuclear technology transfer adapted to the needs of developing countries

    International Nuclear Information System (INIS)

    Martin, A.; Nentwich, D.

    1983-01-01

    The paper explains the build-up of nuclear know-how in the Federal Republic of Germany after 1955, when activities in the nuclear field became permitted. Furthermore, it shows the development of nuclear technology transfer via the increasing number of nuclear power plants exported. The inevitable interrelationship between the efficient transfer of know-how and long-term nuclear co-operation is demonstrated. Emphasis is put on the adaptation of nuclear technology transfer to the needs of the recipient countries. Guidelines to achieve the desired goal are given. (author)

  5. Technical descriptions of ten irrigation technologies for conserving energy

    Energy Technology Data Exchange (ETDEWEB)

    Harrer, B.J.; Wilfert, G.L.

    1983-05-01

    Technical description of ten technologies which were researched to save energy in irrigated agriculture are presented. These technologies are: well design and development ground water supply system optimization, column and pump redesign, variable-speed pumping, pipe network optimization, reduced-pressure center-pivot systems, low-energy precision application, automated gated-pipe system, computerized irrigation scheduling, and instrumented irrigation scheduling. (MHR)

  6. Adopt or Adapt: Sanitation Technology Choices in Urbanizing Malawi.

    Science.gov (United States)

    Chunga, Richard M; Ensink, Jeroen H J; Jenkins, Marion W; Brown, Joe

    2016-01-01

    This paper presents the results of a mixed-methods study examining adaptation strategies that property owners in low-income, rapidly urbanizing areas in Malawi adopt to address the limitations of pit latrines, the most common method of disposing human excreta. A particular challenge is lack of space for constructing new latrines as population density increases: traditional practice has been to cap full pits and simply move to a new site, but increasing demands on space require new approaches to extend the service life of latrines. In this context, we collected data on sanitation technology choices from January to September 2013 through 48 in-depth interviews and a stated preference survey targeting 1,300 property owners from 27 low-income urban areas. Results showed that property owners with concern about space for replacing pit latrines were 1.8 times more likely to select pit emptying service over the construction of new pit latrines with a slab floor (p = 0.02) but there was no significant association between concern about space for replacing pit latrines and intention to adopt locally promoted, novel sanitation technology known as ecological sanitation (ecosan). Property owners preferred to adapt existing, known technology by constructing replacement pit latrines on old pit latrine locations, reducing the frequency of replacing pit latrines, or via emptying pit latrines when full. This study highlights potential challenges to adoption of wholly new sanitation technologies, even when they present clear advantages to end users. To scale, alternative sanitation technologies for rapidly urbanising cities should offer clear advantages, be affordable, be easy to use when shared among multiple households, and their design should be informed by existing adaptation strategies and local knowledge.

  7. Improving conservation outcomes with a new paradigm for understanding species’ fundamental and realized adaptive capacity

    Science.gov (United States)

    Beever, Erik; O’Leary, John; Mengelt, Claudia; West, Jordan M.; Julius, Susan; Green, Nancy; Magness, Dawn; Petes, Laura E.; Stein, Bruce A.; Nicotra, Adrienne B; Hellmann, Jessica J; Robertson, Amanda L; Staudinger, Michelle D.; Rosenberg, Andrew A.; Babij, Eleanora; Brennan, Jean; Schuurman, Gregor W.; Hofmann, Gretchen E

    2016-01-01

    Worldwide, many species are responding to ongoing climate change with shifts in distribution, abundance, phenology, or behavior. Consequently, natural-resource managers face increasingly urgent conservation questions related to biodiversity loss, expansion of invasive species, and deteriorating ecosystem services. We argue that our ability to address these questions is hampered by the lack of explicit consideration of species’ adaptive capacity (AC). AC is the ability of a species or population to cope with climatic changes and is characterized by three fundamental components: phenotypic plasticity, dispersal ability, and genetic diversity. However, few studies simultaneously address all elements; often, AC is confused with sensitivity or omitted altogether from climate-change vulnerability assessments. Improved understanding, consistent definition, and comprehensive evaluations of AC are needed. Using classic ecological-niche theory as an analogy, we propose a new paradigm that considers fundamental and realized AC: the former reflects aspects inherent to species, whereas the latter denotes how extrinsic factors constrain AC to what is actually expressed or observed. Through this conceptualization, we identify ecological attributes contributing to AC, outline areas of research necessary to advance understanding of AC, and provide examples demonstrating how the inclusion of AC can better inform conservation and natural-resource management.

  8. On Study of Application of Power Electronical Technology in Field of Energy Conservation

    Science.gov (United States)

    Song, Ke

    2017-09-01

    aiming at achieving the sustainable development in economy and improving living standard of the residents, the government departments in China have strengthened the promotion of green, low-carbon and sustainable development concepts. Under this context, the energy conservation concept is implemented during the implementation of social production and life activities. Currently, in order to ensure the improvement in social energy conservation benefits, the advanced technologies are applied by China's enterprises and residents. This paper, based on this, discusses the development situations of energy conservation in China, and analyzes the application of power electronical technology in the field of energy conservation, hoping to realize the sustainable development of energy conservation cause in China and to gain high yield.

  9. Overview of deformable mirror technologies for adaptive optics and astronomy

    Science.gov (United States)

    Madec, P.-Y.

    2012-07-01

    From the ardent bucklers used during the Syracuse battle to set fire to Romans’ ships to more contemporary piezoelectric deformable mirrors widely used in astronomy, from very large voice coil deformable mirrors considered in future Extremely Large Telescopes to very small and compact ones embedded in Multi Object Adaptive Optics systems, this paper aims at giving an overview of Deformable Mirror technology for Adaptive Optics and Astronomy. First the main drivers for the design of Deformable Mirrors are recalled, not only related to atmospheric aberration compensation but also to environmental conditions or mechanical constraints. Then the different technologies available today for the manufacturing of Deformable Mirrors will be described, pros and cons analyzed. A review of the Companies and Institutes with capabilities in delivering Deformable Mirrors to astronomers will be presented, as well as lessons learned from the past 25 years of technological development and operation on sky. In conclusion, perspective will be tentatively drawn for what regards the future of Deformable Mirror technology for Astronomy.

  10. Learning and adaptation in waterfowl conservation: By chance or by design?

    Science.gov (United States)

    Johnson, Fred A.; Case, David J.; Humburg, Dale H.

    2016-01-01

    The most recent revision of the North American Waterfowl Management Plan seeks to increase the adaptive capacity of the management enterprise to cope with accelerating changes in climate, land-use patterns, agency priorities, and the waterfowl and wetlands constituency. Institutional and cultural changes of the magnitude envisioned are necessarily slow, messy processes, involving many actors who at a minimum must agree on the need for change. Waterfowl conservation now finds itself in the transition zone between business as usual and some new mode of operation. There are at least 2 different perspectives of this transition: one focuses on process, accountability, and planning for change; another focuses on solutions generated from an organic process of creativity, information sharing, and risk-taking. Both of these views have something to contribute, but some in the wildlife management enterprise may tend to focus more on the first view. We suggest that ideas from panarchy theory, especially those related to the behaviors of complex adaptive systems, can help waterfowl managers better understand and foster the institutional changes they seek.

  11. Threshold evaluations of industrial conservation technologies run in ISTUM base case

    Energy Technology Data Exchange (ETDEWEB)

    1978-12-20

    The results of threshold evaluations performed on several INDUS technologies which were competed with other new and conventional industrial technologies in the Industrial Sector Technology Use Model (ISTUM) developed by EEA are summarized. The ISTUM model is briefly described and includes the input technology categories and service sectors treated in the model, and the solution technique used. The input data specifications are summaried for the Industry Conservation Technologies run in the ISTUM base case. Included are listings of the technologies run in ISTUM, those not run in ISTUM, and a discussion of the absence of a retrofit algorithm in ISTUM and its resulting impact on conservation technologies. Also included is a discussion of the capital cost variability, maximum market fraction, size and load factors and data quality specifications for the conservation technologies in ISTUM. The results of the ISTUM base case run are presented, describing the important limitations and constraints of the base case run, the key assumptions inherent in the base case, and the summarized results of energy savings by year for different generic technology types. The technology characterization data developed for each INDUS technology run in the ISTUM base case are discussed in detail. The descriptions include the calculations and assumptions used in determining the service demand displacement, equipment cost, maximum market fraction, data quality, and size and load range for each technology.

  12. The Technology Introduction of Chain Boiler Energy Conservation Transformation

    Science.gov (United States)

    Li, Henan; Liu, Xiwen; Yuan, Hong; Lin, Jiadai; Zhang, Yu

    2017-12-01

    Introduced the present status of chain boiler efficiency is low, the system analysis of the chain boiler optimization and upgrading of technology, for the whole progress of chain boiler to provide some ideas and reference.

  13. New 2D adaptive mesh refinement algorithm based on conservative finite-differences with staggered grid

    Science.gov (United States)

    Gerya, T.; Duretz, T.; May, D. A.

    2012-04-01

    We present new 2D adaptive mesh refinement (AMR) algorithm based on stress-conservative finite-differences formulated for non-uniform rectangular staggered grid. The refinement approach is based on a repetitive cell splitting organized via a quad-tree construction (every parent cell is split into 4 daughter cells of equal size). Irrespective of the level of resolution every cell has 5 staggered nodes (2 horizontal velocities, 2 vertical velocities and 1 pressure) for which respective governing equations, boundary conditions and interpolation equations are formulated. The connectivity of the grid is achieved via cross-indexing of grid cells and basic nodal points located in their corners: four corner nodes are indexed for every cell and up to 4 surrounding cells are indexed for every node. The accuracy of the approach depends critically on the formulation of the stencil used at the "hanging" velocity nodes located at the boundaries between different levels of resolution. Most accurate results are obtained for the scheme based on the volume flux balance across the resolution boundary combined with stress-based interpolation of velocity orthogonal to the boundary. We tested this new approach with a number of 2D variable viscosity analytical solutions. Our tests demonstrate that the adaptive staggered grid formulation has convergence properties similar to those obtained in case of a standard, non-adaptive staggered grid formulation. This convergence is also achieved when resolution boundary crosses sharp viscosity contrast interfaces. The convergence rates measured are found to be insensitive to scenarios when the transition in grid resolution crosses sharp viscosity contrast interfaces. We compared various grid refinement strategies based on distribution of different field variables such as viscosity, density and velocity. According to these tests the refinement allows for significant (0.5-1 order of magnitude) increase in the computational accuracy at the same

  14. Unintended outcomes of farmers' adaptation to climate variability: deforestation and conservation in Calakmul and Maya biosphere reserves

    Directory of Open Access Journals (Sweden)

    Claudia Rodriguez-Solorzano

    2014-06-01

    Full Text Available Minimizing the impact of climate change on farmer livelihoods is crucial, but adaptation efforts may have unintended consequences for ecosystems, with potential impacts on farmers' welfare. Unintended outcomes of climate adaptation strategies have been widely discussed, however, empirical exploration has been neglected. Grounded in scholarship on climate adaptation, environmental governance, social-ecological systems, and land-use change, this paper studies whether farmers' climate adaptation contributes to deforestation or forest conservation. The paper draws on interviews with 353 farmers from 46 communities in Calakmul Biosphere Reserve in Mexico and Maya Biosphere Reserve in Guatemala. Farmers in the area of study have implemented adaptation strategies that people around the world have used for centuries, including migration, diversification, savings, and pooling. The findings show that climate adaptation can increase deforestation or support forest conservation depending on the type of adaptation strategy farmers implement. Saving, based on cattle ranching, is a deforestation-driving strategy. The choice of this strategy is influenced by distance to the commercial and administrative center and cash benefits from the forest. Deforestation can have a negative impact on farmers' welfare, as well as harm biodiversity and contribute to increased climate change. Thus, deforestation-driving adaptation strategies may be ineffective. However, diversification, based on off-farm jobs and operating provision shops, is a conservation-driving strategy influenced by distance as well as by family size. Farmers who choose diversification to adapt may contribute to a virtuous circle in which livelihood improvement in the short term leads to enhanced social-ecological resilience in the longer term. The need for farmers to implement adaptation strategies thus represents great risk but also opportunities.

  15. Reconsideration for conservation units of wild Primula sieboldii in Japan based on adaptive diversity and molecular genetic diversity.

    Science.gov (United States)

    Yoshida, Yasuko; Honjo, Masanori; Kitamoto, Naoko; Ohsawa, Ryo

    2009-08-01

    Primula sieboldii E. Morren is a perennial clonal herb that is widely distributed in Japan, but in danger of extinction in the wild. In a previous study, we revealed the genetic diversity of the species using chloroplast and nuclear DNA and used this information to define conservation units. However, we lacked information on adaptive genetic diversity, which is important for long-term survival and, thus, for the definition of conservation units. In order to identify adaptive traits that showed adaptive differentiation among populations, we studied the genetic variation in six quantitative traits within and among populations for 3 years in a common garden using 110 genets from five natural populations from three regions of Japan. The number of days to bud initiation was adaptive quantitative trait for which the degree of genetic differentiation among populations (QST) was considerably larger than that in eight microsatellite markers (FST). The relationship between this trait and environmental factors revealed that the number of days to bud initiation was negatively correlated, with the mean temperature during the growing period at each habitat. This suggests that adaptive differentiation in the delay before bud initiation was caused by selective pressure resulting from temperature differences among habitats. Our results suggest that based on adaptive diversity and neutral genetic diversity, the Saitama population represents a new conservation unit.

  16. The Place of Technology in the Conservative-Liberal Democrat Education Agenda: An Ambition of Absence?

    Science.gov (United States)

    Selwyn, Neil

    2011-01-01

    Schools' use of digital technology has so far proved to be a peripheral feature of the Conservative-Liberal education agenda. Through a series of reductions to previously extensive bureaucratic and funding structures, the Coalition administration has presided over a swift but sustained withdrawal of state support for digital technology use in…

  17. Prospects for reconciling the conflict between economic growth and biodiversity conservation with technological progress.

    Science.gov (United States)

    Czech, Brian

    2008-12-01

    The conflict between economic growth and biodiversity conservation is understood in portions of academia and sometimes acknowledged in political circles. Nevertheless, there is not a unified response. In political and policy circles, the environmental Kuznets curve (EKC) is posited to solve the conflict between economic growth and environmental protection. In academia, however, the EKC has been deemed fallacious in macroeconomic scenarios and largely irrelevant to biodiversity. A more compelling response to the conflict is that it may be resolved with technological progress. Herein I review the conflict between economic growth and biodiversity conservation in the absence of technological progress, explore the prospects for technological progress to reconcile that conflict, and provide linguistic suggestions for describing the relationships among economic growth, technological progress, and biodiversity conservation. The conflict between economic growth and biodiversity conservation is based on the first two laws of thermodynamics and principles of ecology such as trophic levels and competitive exclusion. In this biophysical context, the human economy grows at the competitive exclusion of nonhuman species in the aggregate. Reconciling the conflict via technological progress has not occurred and is infeasible because of the tight linkage between technological progress and economic growth at current levels of technology. Surplus production in existing economic sectors is required for conducting the research and development necessary for bringing new technologies to market. Technological regimes also reflect macroeconomic goals, and if the goal is economic growth, reconciliatory technologies are less likely to be developed. As the economy grows, the loss of biodiversity may be partly mitigated with end-use innovation that increases technical efficiency, but this type of technological progress requires policies that are unlikely if the conflict between economic growth

  18. Energy as form giver: conservation technologies in architecture's future

    Energy Technology Data Exchange (ETDEWEB)

    Vosbeck, R R

    1981-07-01

    The need to conserve energy has changed architecture, which now has distinct energy-conscious designs and a new design vocabulary. Future designs will consider how energy affects buildings and minimize the impact in siting and landscaping decisions. Existing buildings must also be accommodated. No building performance standards exist yet that allow architects to be creative, although architects are working more closely with engineers and builders. Earth-sheltering designs will have to overcome psychological barriers, but the opportunities to preserve open space and views will improve their acceptability. The American Institute of Archiects will assume leadership in this area, but it will not take over all the research programs abandoned by the Reagan administration. Future housing will be more compact, grouped, and closely integrated. (DCK)

  19. Information Commons Features Cutting-Edge Conservation and Technology

    Science.gov (United States)

    Gilroy, Marilyn

    2011-01-01

    This article features Richard J. Klarchek Information Commons (IC) at Loyola University Chicago, an all-glass library building on the shore of Chicago's Lake Michigan that is not only a state-of-the-art digital research library and study space--it also runs on cutting-edge energy technology. The building has attracted attention and visitors from…

  20. Integrating Collaboration, Adaptive Management, and Scenario-Planning: Experiences at Las Cienegas National Conservation Area

    Directory of Open Access Journals (Sweden)

    Jeremy K. Caves

    2013-09-01

    Full Text Available There is growing recognition that public lands cannot be managed as islands; rather, land management must address the ecological, social, and temporal complexity that often spans jurisdictions and traditional planning horizons. Collaborative decision making and adaptive management (CAM have been promoted as methods to reconcile competing societal demands and respond to complex ecosystem dynamics. We detail the experiences of land managers and stakeholders in using CAM at Las Cienegas National Conservation Area (LCNCA, a highly valued site under the jurisdiction of the Bureau of Land Management (BLM. The CAM process at Las Cienegas is marked by strong stakeholder engagement, with four core elements: (1 shared watershed goals with measurable resource objectives; (2 relevant and reliable scientific information; (3 mechanisms to incorporate new information into decision making; and (4 shared learning to improve both the process and management actions. The combination of stakeholder engagement and adaptive management has led to agreement on contentious issues, more innovative solutions, and more effective land management. However, the region is now experiencing rapid changes outside managers' control, including climate change, human population growth, and reduced federal budgets, with large but unpredictable impacts on natural resources. Although the CAM experience provides a strong foundation for making the difficult and contentious management decisions that such changes are likely to require, neither collaboration nor adaptive management provides a sufficient structure for addressing the externalities that drive uncontrollable and unpredictable change. As a result, LCNCA is exploring two specific modifications to CAM that may better address emerging challenges, including: (1 creating nested resource objectives to distinguish between those objectives that may be crucial to maintaining ecological resilience from those that may hinder a flexible

  1. Shape Morphing Adaptive Radiator Technology (SMART) Updates to Techport Entry

    Science.gov (United States)

    Erickson, Lisa; Bertagne, Christopher; Hartl, Darren; Witcomb, John; Cognata, Thomas

    2017-01-01

    The Shape-Morphing Adaptive Radiator Technology (SMART) project builds off the FY16 research effort that developed a flexible composite radiator panel and demonstrated its ability to actuate from SMA's attached to it. The proposed FY17 Shape-Morphing Adaptive Radiator Technology (SMART) project's goal is to 1) develop a practical radiator design with shape memory alloys (SMAs) bonded to the radiator's panel, and 2) build a multi-panel radiator prototype for subsequent system level thermal vacuum tests. The morphing radiator employs SMA materials to passively change its shape to adapt its rate of heat rejection to vehicle requirements. Conceptually, the radiator panel has a naturally closed position (like a cylinder) in a cold environment. Whenever the radiator's temperature gradually rises, SMA's affixed to the face sheet will pull the face sheet open a commensurate amount - increasing the radiators view to space and causing it to reject more heat. In a vehicle, the radiator's variable heat rejection capabilities would reduce the number of additional heat rejection devices in a vehicle's thermal control system. This technology aims to help achieve the required maximum to minimum heat rejection ratio required for manned space vehicles to adopt a lighter, simpler, single loop thermal control architecture (ATCS). Single loop architectures are viewed as an attractive means to reduce mass and complexity over traditional dual-loop solutions. However, fluids generally considered safe enough to flow within crewed cabins (e.g. propylene glycol-water mixtures) have much higher freezing points and viscosities than those used in the external sides of dual loop ATCSs (e.g. Ammonia and HFE7000).

  2. Adaptation.

    Science.gov (United States)

    Broom, Donald M

    2006-01-01

    The term adaptation is used in biology in three different ways. It may refer to changes which occur at the cell and organ level, or at the individual level, or at the level of gene action and evolutionary processes. Adaptation by cells, especially nerve cells helps in: communication within the body, the distinguishing of stimuli, the avoidance of overload and the conservation of energy. The time course and complexity of these mechanisms varies. Adaptive characters of organisms, including adaptive behaviours, increase fitness so this adaptation is evolutionary. The major part of this paper concerns adaptation by individuals and its relationships to welfare. In complex animals, feed forward control is widely used. Individuals predict problems and adapt by acting before the environmental effect is substantial. Much of adaptation involves brain control and animals have a set of needs, located in the brain and acting largely via motivational mechanisms, to regulate life. Needs may be for resources but are also for actions and stimuli which are part of the mechanism which has evolved to obtain the resources. Hence pigs do not just need food but need to be able to carry out actions like rooting in earth or manipulating materials which are part of foraging behaviour. The welfare of an individual is its state as regards its attempts to cope with its environment. This state includes various adaptive mechanisms including feelings and those which cope with disease. The part of welfare which is concerned with coping with pathology is health. Disease, which implies some significant effect of pathology, always results in poor welfare. Welfare varies over a range from very good, when adaptation is effective and there are feelings of pleasure or contentment, to very poor. A key point concerning the concept of individual adaptation in relation to welfare is that welfare may be good or poor while adaptation is occurring. Some adaptation is very easy and energetically cheap and

  3. Socio-Economic Factors Assessment Affecting the Adoption of Soil Conservation Technologies on Rwenzori Mountain

    Directory of Open Access Journals (Sweden)

    Nabalegwa Wambede Muhamud

    2015-06-01

    Full Text Available This study analysed the role of socio-economic factors in influencing farmers’ adoption to soil conservation technologies in Bugoye Sub-county, Rwenzori Mountain. A cross sectional household survey design was used in this study, using systematic sampling to obtain 150 household samples. Qualitative analysis and chi-square tests were used to analyze these data. Results indicated that only 54% of the sampled households have adopted soil conservation, and revealed that eight of the nine factors significantly influenced farmers’ adoption, which are slope, farm size, farm distance from home, education level, family income, training, membership to NGOs, and credit accessibility. Only family size was insignificant. Other constraints are labour demands, cost of conservation work, land fragmentation, crop pests, and the limited agricultural extension services. It is recommended to perform training for farmers on designing soil conservation structures. Policies for empowering farmers with extra income are crucial to increase the adoption of soil conservation efforts.

  4. Nursing Approach Based on Roy Adaptation Model in a Patient Undergoing Breast Conserving Surgery for Breast Cancer.

    Science.gov (United States)

    Ursavaş, Figen Erol; Karayurt, Özgül; İşeri, Özge

    2014-07-01

    The use of models in nursing provides nurses to focus on the role of nursing and its applications rather than medical practice. In addition, it helps patient care to be systematic, purposeful, controlled and effective. One of the commonly used models in nursing is Roy Adaptation Model. According to Roy adaptation model, the aim of nursing is to increase compliance and life expectancy. Roy Adaptation Model evaluates the patient in physiologic mode, self-concept mode, role function mode and interdependence mode aiming to provide holistic care. This article describes the use of Roy Adaptation Model in the care of a patient who has been diagnosed with breast cancer and had breast-conserving surgery. Patient data was evaluated in the four modes of Roy adaptation model (physiologic, self-concept, role function, and interdependence modes) and the nursing process was applied.

  5. Selected bibliography: cost and energy savings of conservation and renewable energy technologies

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-05-01

    This bibliography is a compilation of reports on the cost and energy savings of conservation and renewable energy applications throughout the United States. It is part of an overall effort to inform utilities of technological developments in conservation and renewable energy technologies and so aid utilities in their planning process to determine the most effective and economic combination of capital investments to meet customer needs. Department of Energy assessments of the applications, current costs and cost goals for the various technologies included in this bibliography are presented. These assessments are based on analyses performed by or for the respective DOE Program Offices. The results are sensitive to a number of variables and assumptions; however, the estimates presented are considered representative. These assessments are presented, followed by some conclusions regarding the potential role of the conservation and renewable energy alternative. The approach used to classify the bibliographic citations and abstracts is outlined.

  6. Structural adaptation of extreme halophilic proteins through decrease of conserved hydrophobic contact surface

    Science.gov (United States)

    2011-01-01

    Background Halophiles are extremophilic microorganisms growing optimally at high salt concentrations. There are two strategies used by halophiles to maintain proper osmotic pressure in their cytoplasm: accumulation of molar concentrations of potassium and chloride with extensive adaptation of the intracellular macromolecules ("salt-in" strategy) or biosynthesis and/or accumulation of organic osmotic solutes ("osmolyte" strategy). Our work was aimed at contributing to the understanding of the shared molecular mechanisms of protein haloadaptation through a detailed and systematic comparison of a sample of several three-dimensional structures of halophilic and non-halophilic proteins. Structural differences observed between the "salt-in" and the mesophilic homologous proteins were contrasted to those observed between the "osmolyte" and mesophilic pairs. Results The results suggest that haloadaptation strategy in the presence of molar salt concentration, but not of osmolytes, necessitates a weakening of the hydrophobic interactions, in particular at the level of conserved hydrophobic contacts. Weakening of these interactions counterbalances their strengthening by the presence of salts in solution and may help the structure preventing aggregation and/or loss of function in hypersaline environments. Conclusions Considering the significant increase of biotechnology applications of halophiles, the understanding of halophilicity can provide the theoretical basis for the engineering of proteins of great interest because stable at concentrations of salts that cause the denaturation or aggregation of the majority of macromolecules. PMID:22192175

  7. Adaptive management for improving species conservation across the captive-wild spectrum

    Science.gov (United States)

    Canessa, Stefano; Guillera-Arroita, Gurutzeta; Lahoz-Monfort, José J.; Southwell, Darren M; Armstrong, Doug P.; Chadès, Iadine; Lacy, Robert C; Converse, Sarah J.

    2016-01-01

    Conservation of endangered species increasingly envisages complex strategies that integrate captive and wild management actions. Management decisions in this context must be made in the face of uncertainty, often with limited capacity to collect information. Adaptive management (AM) combines management and monitoring, with the aim of updating knowledge and improving decision-making over time. We provide a guide for managers who may realize the potential of AM, but are unsure where to start. The urgent need for iterative management decisions, the existence of uncertainty, and the opportunity for learning offered by often highly-controlled captive environments create favorable conditions for AM. However, experiments and monitoring may be complicated by small sample sizes, and the ability to control the system, including stochasticity and observability, may be limited toward the wild end of the spectrum. We illustrate the key steps to implementing AM in threatened species management using four case studies, including the management of captive programs for cheetah (Acinonyx jubatus) and whooping cranes (Grus americana), of a translocation protocol for Arizona cliffroses Purshia subintegra and of ongoing supplementary feeding of reintroduced hihi (Notiomystis cincta) populations. For each case study, we explain (1) how to clarify whether the decision can be improved by learning (i.e. it is iterative and complicated by uncertainty) and what the management objectives are; (2) how to articulate uncertainty via alternative, testable hypotheses such as competing models or parameter distributions; (3) how to formally define how additional information can be collected and incorporated in future management decisions.

  8. Structural adaptation of extreme halophilic proteins through decrease of conserved hydrophobic contact surface

    Directory of Open Access Journals (Sweden)

    Siglioccolo Alessandro

    2011-12-01

    Full Text Available Abstract Background Halophiles are extremophilic microorganisms growing optimally at high salt concentrations. There are two strategies used by halophiles to maintain proper osmotic pressure in their cytoplasm: accumulation of molar concentrations of potassium and chloride with extensive adaptation of the intracellular macromolecules ("salt-in" strategy or biosynthesis and/or accumulation of organic osmotic solutes ("osmolyte" strategy. Our work was aimed at contributing to the understanding of the shared molecular mechanisms of protein haloadaptation through a detailed and systematic comparison of a sample of several three-dimensional structures of halophilic and non-halophilic proteins. Structural differences observed between the "salt-in" and the mesophilic homologous proteins were contrasted to those observed between the "osmolyte" and mesophilic pairs. Results The results suggest that haloadaptation strategy in the presence of molar salt concentration, but not of osmolytes, necessitates a weakening of the hydrophobic interactions, in particular at the level of conserved hydrophobic contacts. Weakening of these interactions counterbalances their strengthening by the presence of salts in solution and may help the structure preventing aggregation and/or loss of function in hypersaline environments. Conclusions Considering the significant increase of biotechnology applications of halophiles, the understanding of halophilicity can provide the theoretical basis for the engineering of proteins of great interest because stable at concentrations of salts that cause the denaturation or aggregation of the majority of macromolecules.

  9. Adapting qualitative research strategies to technology savvy adolescents.

    Science.gov (United States)

    Mason, Deanna Marie; Ide, Bette

    2014-05-01

    To adapt research strategies involving adolescents in a grounded theory qualitative research study by conducting email rather than face-to-face interviews. Adolescent culture relies heavily on text-based communication and teens prefer interactions mediated through technology. Traditional qualitative research strategies need to be rethought when working with adolescents. Adapting interviewing strategies to electronic environments is timely and relevant for researching adolescents. Twenty three adolescents (aged 16-21) were interviewed by email. A letter of invitation was distributed. Potential participants emailed the researcher to convey interest in participating. If the inclusion criteria were met, email interviews were initiated. Participants controlled the interviews through their rate of response to interview questions. A grounded theory methodology was employed. Initial contact with participants reiterated confidentiality and the ability to withdraw from the study at any time. Interviews began with the collection of demographic information and a broad opening based on a semi-structured interview guide. All data were permissible, including text, photos, music, videos or outside media, for example YouTube. The participant was allowed to give direction to the interview after initial questions were posed. Email interviews continued until saturation was reached in the data. Participants were enthusiastic about email interviewing. Attrition did not occur. Email interviewing gave participants more control over the research, decreased power differentials between the adolescent and researcher, allowed the study to be adapted to cultural, linguistic and developmental needs, and maintained confidentiality. As participants said that email communication was slow and they preferred instant messaging, replication in faster-paced media is recommended. Repetition in face-to-face settings is warranted to evaluate how technology may have influenced the findings. Implications for

  10. Methods and technologies of energy conservation in trade business

    Energy Technology Data Exchange (ETDEWEB)

    Kalveram, G

    1983-10-01

    Proposals to devise a structure of energy consumers in the Federal Republic of Germany mostly make use of the following division: industry, transport, and households, small consumers and other consumers. The third consumer group, which is supposed to include also trading businesses, accounts for approximately 44% of the total energy consumption. The remaining 56% are consumed by the industry (39%) and transport (17%). The level of energy consumption and energy cost in the trade is determined by a multitude of factors specific to the enterprise, such as for instance the geographic position of the undertaking, i.e. differing climatic conditions, opening times, condition of the buildings and technical equipment. In spite of this, considerable amounts can be saved if the energy sources respectively the aggregates powered with them are used carefully and economically and if the most recent energy-saving technologies are taken into account.

  11. Training program for energy conservation in new building construction. Volume III. Energy conservation technology for plan examiners and code administrators. Energy Conservation Technology Series 200

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-12-01

    Under the sponsorship of the United States Department of Energy, a Model Code for Energy Conservation in New Building Construction has been developed by those national organizations primarily concerned with the development and promulgation of model codes. The technical provisions are based on ASHRAE Standard 90-75 and are intended for use by state and local officials. The subject of regulation of new building construction to assure energy conservation is recognized as one in which code officials have not had previous exposure. It was also determined that application of the model code would be made at varying levels by officials with both a specific requirement for knowledge and a differing degree of prior training in the state-of-the-art. Therefore, a training program and instructional materials were developed for code officials to assist them in the implementation and enforcement of energy efficient standards and codes. The training program for Energy Conservation Tehnology for Plan Examiners and Code Administrators (ECT Series 200) is presented.

  12. Resilience design: toward a synthesis of cognition, learning, and collaboration for adaptive problem solving in conservation and natural resource stewardship

    Directory of Open Access Journals (Sweden)

    Charles G. Curtin

    2014-06-01

    Full Text Available Through the resilience design approach, I propose to extend the resilience paradigm by re-examining the components of adaptive decision-making and governance processes. The approach can be divided into three core components: (1 equity design, i.e., the integration of collaborative approaches to conservation and adaptive governance that generates effective self-organization and emergence in conservation and natural resource stewardship; (2 process design, i.e., the generation of more effective knowledge through strategic development of information inputs; and (3 outcome design, i.e., the pragmatic synthesis of the previous two approaches, generating a framework for developing durable and dynamic conservation and stewardship. The design of processes that incorporate perception and learning is critical to generating durable solutions, especially in developing linkages between wicked social and ecological challenges. Starting from first principles based on human cognition, learning, and collaboration, coupled with nearly two decades of practical experience designing and implementing ecosystem-level conservation and restoration programs, I present how design-based approaches to conservation and stewardship can be achieved. This context is critical in helping practitioners and resources managers undertake more effective policy and practice.

  13. Status of thermal imaging technology as applied to conservation-update 1

    Energy Technology Data Exchange (ETDEWEB)

    Snow, F.J.; Wood, J.T.; Barthle, R.C.

    1980-07-01

    This document updates the 1978 report on the status of thermal imaging technology as applied to energy conservation in buildings. Thermal imaging technology is discussed in terms of airborne surveys, ground survey programs, and application needs such as standards development and lower cost equipment. Information on the various thermal imaging devices was obtained from manufacturer's standard product literature. Listings are provided of infrared projects of the DOE building diagnostics program, of aerial thermographic firms, and of aerial survey programs. (LCL)

  14. An adaptive decision framework for the conservation of a threatened plant

    Science.gov (United States)

    Moore, Clinton T.; Fonnesbeck, Christopher J.; Shea, Katriona; Lah, Kristopher J.; McKenzie, Paul M.; Ball, Lianne C.; Runge, Michael C.; Alexander, Helen M.

    2011-01-01

    Mead's milkweed Asclepias meadii, a long-lived perennial herb of tallgrass prairie and glade communities of the central United States, is a species designated as threatened under the U.S. Endangered Species Act. Challenges to its successful management include the facts that much about its life history is unknown, its age at reproductive maturity is very advanced, certain life stages are practically unobservable, its productivity is responsive to unpredictable environmental events, and most of the known populations occur on private lands unprotected by any legal conservation instrument. One critical source of biological uncertainty is the degree to which fire promotes growth and reproductive response in the plant. To aid in its management, we developed a prototype population-level state-dependent decision-making framework that explicitly accounts for this uncertainty and for uncertainties related to stochastic environmental effects and vital rates. To parameterize the decision model, we used estimates found in the literature, and we analyzed data from a long-term monitoring program where fates of individual plants were observed through time. We demonstrate that different optimal courses of action are followed according to how one believes that fire influences reproductive response, and we show that the action taken for certain population states is informative for resolving uncertainty about competing beliefs regarding the effect of fire. We advocate the use of a model-predictive approach for the management of rare populations, particularly when management uncertainty is profound. Over time, an adaptive management approach should reduce uncertainty and improve management performance as predictions of management outcome generated under competing models are continually informed and updated by monitoring data.

  15. From tetrapods to primates: conserved developmental mechanisms in diverging ecological adaptations.

    Science.gov (United States)

    Aboitiz, Francisco; Montiel, Juan F

    2012-01-01

    Primates are endowed with a brain about twice the size that of a mammal with the same body size, and humans have the largest brain relative to body size of all animals. This increase in brain size may be related to the acquisition of higher cognitive skills that permitted more complex social interactions, the evolution of culture, and the eventual ability to manipulate the environment. Nevertheless, in its internal structure, the primate brain shares a very conserved design with other mammals, being covered by a six-layered neocortex that, although expands disproportionately to other brain components, it does so following relatively well-defined allometric trends. Thus, the most fundamental events generating the basic design of the primate and human brain took place before the appearance of the first primate-like animal. Presumably, the earliest mammals already displayed a brain morphology radically different from that of their ancestors and that of their sister group, the reptiles, being characterized by the presence of an incipient neocortex that underwent an explosive growth in subsequent mammal evolution. In this chapter, we propose an integrative hypothesis for the origin of the mammalian neocortex, by considering the developmental modifications, functional networks, and ecological adaptations involved in the generation of this structure during the cretaceous period. Subsequently, the expansion of the primate brain is proposed to have relied on the amplification of the same, or very similar, developmental mechanisms as those involved in its primary origins, even in different ecological settings. Copyright © 2012 Elsevier B.V. All rights reserved.

  16. International symposium on radiation technology for conservation of the environment. Extended synopses

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-09-01

    This document includes extended synopses of 54 presentations given at the International Symposium on Radiation Technology for the conservation of the Environment held in Zakopane (near Cracow), Poland, 8-12 September 1997. Each presentation is separately indexed. Refs, figs, tabs.

  17. International symposium on radiation technology for conservation of the environment. Extended synopses

    International Nuclear Information System (INIS)

    1997-09-01

    This document includes extended synopses of 54 presentations given at the International Symposium on Radiation Technology for the conservation of the Environment held in Zakopane near Cracow), Poland, 8-12 September 1997. Each presentation is separately indexed. Refs, figs, tabs

  18. Technologies for adaptation to climate change. Examples from the agricultural and water sectors in Lebanon

    DEFF Research Database (Denmark)

    Trærup, Sara Lærke Meltofte; Stephan, Jean

    2015-01-01

    for integrating adaptation technologies into the planning and implementation of on-going and future projects. Based on local-level data from a technology needs assessment project in Lebanon, this paper presents two examples of the economic feasibility of implementing adaptation technologies in the agricultural...

  19. Adaptive optics scanning laser ophthalmoscope imaging: technology update

    Directory of Open Access Journals (Sweden)

    Merino D

    2016-04-01

    Full Text Available David Merino, Pablo Loza-Alvarez The Institute of Photonic Sciences (ICFO, The Barcelona Institute of Science and Technology, Castelldefels, Barcelona, Spain Abstract: Adaptive optics (AO retinal imaging has become very popular in the past few years, especially within the ophthalmic research community. Several different retinal techniques, such as fundus imaging cameras or optical coherence tomography systems, have been coupled with AO in order to produce impressive images showing individual cell mosaics over different layers of the in vivo human retina. The combination of AO with scanning laser ophthalmoscopy has been extensively used to generate impressive images of the human retina with unprecedented resolution, showing individual photoreceptor cells, retinal pigment epithelium cells, as well as microscopic capillary vessels, or the nerve fiber layer. Over the past few years, the technique has evolved to develop several different applications not only in the clinic but also in different animal models, thanks to technological developments in the field. These developments have specific applications to different fields of investigation, which are not limited to the study of retinal diseases but also to the understanding of the retinal function and vision science. This review is an attempt to summarize these developments in an understandable and brief manner in order to guide the reader into the possibilities that AO scanning laser ophthalmoscopy offers, as well as its limitations, which should be taken into account when planning on using it. Keywords: high-resolution, in vivo retinal imaging, AOSLO

  20. Energy and water conservation at lignite-fired power plants using drying and water recovery technologies

    International Nuclear Information System (INIS)

    Liu, Ming; Qin, Yuanzhi; Yan, Hui; Han, Xiaoqu; Chong, Daotong

    2015-01-01

    Highlights: • Pre-drying and water recovery technologies were used to conserve energy and water. • The energy and water conservation potential were analyzed with reference cases. • The air-cooling unit produces water when the water content of lignite is high enough. • Influences of main parameters on energy and water conservation were analyzed. - Abstract: Lignite is considered as a competitive energy raw material with high security of supply viewed from a global angle. However, lignite-fired power plants have many shortcomings, including high investment, low energy efficiency and high water use. To address these issues, the drying and water recovery technologies are integrated within lignite-fired power plants. Both air-cooling and wet-cooling units with three kinds of lignite as feeding fuel were analyzed quantitatively. Results showed that energy conservation and water conservation are obtained simultaneously. The power plant firing high moisture lignite becomes more environmental friendly with higher power generation efficiency and a lower water makeup rate than the one firing low moisture lignite. And further calculation revealed that the air-cooling unit needs no makeup water and even produces some water as it generates power, when the water carrying coefficient is higher than 40 g/MJ.

  1. Analyzing Learning about Conservation of Matter in Students while Adapting to the Needs of a School

    Science.gov (United States)

    Doucerain, Marina; Schwartz, Marc S.

    2010-01-01

    We probed the impact of two teaching strategies, "guided inquiry" and "argumentation," on students' conceptual understanding of the conservation of matter. Conservation of matter is a central concept in middle school science curriculum and a prerequisite upon which rests more complex constructs in chemistry. The results indicate that guided…

  2. Learning analytics in practice: The effects of adaptive educational technology Snappet on students' arithmetic skills

    NARCIS (Netherlands)

    Molenaar, I.; Knoop-van Campen, C.A.N.

    2016-01-01

    Even though the recent influx of tablets in primary education goes together with the vision that educational technology empowered with learning analytics will revolutionize education, empirical results supporting this claim are scares. Adaptive educational technology Snappet combines extracted and

  3. Assisted reproductive technology in bear (ursidae) conservation Ailuropoda Melanoleuca, Ursus Arctos and Usus Maritimus

    OpenAIRE

    Baldoví Sánchez, Isabel; Universitat Autònoma de Barcelona. Facultat de Veterinària

    2014-01-01

    Póster The Ursidae family is severely threatened having 6 of the 8 bear species in danger of extinction. Due to its reproductive physiology characteristics, ursids have a low reproduction rate which aggravates in captivity. It is because of this, that reproductive assisted technology has become a key element in the conservation of this species. The following study is the compendium of the obtained results in this field in three ursid species: giant panda (Auliropoda melanoleuca), brown bea...

  4. Residential energy-efficient technology adoption, energy conservation, knowledge, and attitudes: An analysis of European countries

    International Nuclear Information System (INIS)

    Mills, Bradford; Schleich, Joachim

    2012-01-01

    Relationships between measures of household energy use behavior and household characteristics are estimated using a unique dataset of approximately 5000 households in 10 EU countries and Norway. Family age-composition patterns are found to have a distinct impact on household energy use behavior. Households with young children are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy savings for environmental reasons. By contrast, households with a high share of elderly members place more importance on financial savings, and have lower levels of technology adoption, energy conservation practice use, and knowledge about household energy use. Education levels also matter, with higher levels associated with energy-efficient technology adoption and energy conservation practice use. Similarly, university education increases the stated importance of energy savings for greenhouse gas reductions and decreases the stated importance for financial reasons. Education impacts also vary greatly across survey countries and there is some evidence of an Eastern–Western European divide with respect to attitudes towards energy savings. These cross-country differences highlight the need to balance a common EU energy-efficiency policy framework with flexibility for country specific policies to address unique constraints to energy-efficient technology and conservation practice adoption. - Highlights: ► Household energy use behavior is explored with data from 11 European countries. ► Household age structure and education influence household energy use behavior and attitudes. ► Significant country differences in household energy use behavior exist. ► The EU needs to balance a common energy-efficiency policy framework with country specific policies.

  5. Socio-Pedagogical Complex as a Pedagogical Support Technology of Students' Social Adaptation

    Science.gov (United States)

    Sadovaya, Victoriya V.; Simonova, Galina I.

    2016-01-01

    The relevance of the problem stated in the article is determined by the need of developing technological approaches to pedagogical support of students' social adaptation. The purpose of this paper is to position the technological sequence of pedagogical support of students' social adaptation in the activities of the socio-pedagogical complex. The…

  6. Augmentation of Sensorimotor Adaptability Using Stochastic Resonance Technologies

    Data.gov (United States)

    National Aeronautics and Space Administration — Astronauts experience sensorimotor dysfunction during adaption to g-transitions that occur when entering and exiting microgravity. These sensorimotor disturbances...

  7. Consistent and Conservative Model Selection with the Adaptive LASSO in Stationary and Nonstationary Autoregressions

    DEFF Research Database (Denmark)

    Kock, Anders Bredahl

    2016-01-01

    We show that the adaptive Lasso is oracle efficient in stationary and nonstationary autoregressions. This means that it estimates parameters consistently, selects the correct sparsity pattern, and estimates the coefficients belonging to the relevant variables at the same asymptotic efficiency...

  8. Adapting Technological Pedagogical Content Knowledge Framework to Teach Mathematics

    Science.gov (United States)

    Getenet, Seyum Tekeher

    2017-01-01

    The technological pedagogical content knowledge framework is increasingly in use by educational technology researcher as a generic description of the knowledge requirements for teachers using technology in all subjects. This study describes the development of a mathematics specific variety of the technological pedagogical content knowledge…

  9. A climate-change adaptation framework to reduce continental-scale vulnerability across conservation reserves

    Science.gov (United States)

    D.R. Magness; J.M. Morton; F. Huettmann; F.S. Chapin; A.D. McGuire

    2011-01-01

    Rapid climate change, in conjunction with other anthropogenic drivers, has the potential to cause mass species extinction. To minimize this risk, conservation reserves need to be coordinated at multiple spatial scales because the climate envelopes of many species may shift rapidly across large geographic areas. In addition, novel species assemblages and ecological...

  10. Adaptation approaches for conserving ecosystems services and biodiversity in dynamic landscapes caused by climate change

    Science.gov (United States)

    Oswald J. Schmitz; Anne M. Trainor

    2014-01-01

    Climate change stands to cause animal species to shift their geographic ranges. This will cause ecosystems to become reorganized across landscapes as species migrate into and out of specific locations with attendant impacts on values and services that ecosystems provide to humans. Conservation in an era of climate change needs to ensure that landscapes are resilient by...

  11. A climate adaptation strategy for conservation and management of yellowcedar in Alaska

    Science.gov (United States)

    Paul E. Hennon; Carol M. McKenzie; David D' Amore; Dustin T. Wittwer; Robin L. Mulvey; Melinda S. Lamb; Frances E. Biles; Rich C. Cronn

    2016-01-01

    A conservation and management strategy for yellow-cedar in Alaska is presented in the context of climate change. This document has four sections. Section 1 covers the ecology and silvics of yellow-cedar, as well as other background information. Section 2 outlines knowledge on the extensive mortality to yellow-cedar, including the role of climate. Section 3 describes...

  12. Computer technology: its potential for industrial energy conservation. A technology applications manual

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-01-01

    Today, computer technology is within the reach of practically any industrial corporation regardless of product size. This manual highlights a few of the many applications of computers in the process industry and provides the technical reader with a basic understanding of computer technology, terminology, and the interactions among the various elements of a process computer system. The manual has been organized to separate process applications and economics from computer technology. Chapter 1 introduces the present status of process computer technology and describes the four major applications - monitoring, analysis, control, and optimization. The basic components of a process computer system also are defined. Energy-saving applications in the four major categories defined in Chapter 1 are discussed in Chapter 2. The economics of process computer systems is the topic of Chapter 3, where the historical trend of process computer system costs is presented. Evaluating a process for the possible implementation of a computer system requires a basic understanding of computer technology as well as familiarity with the potential applications; Chapter 4 provides enough technical information for an evaluation. Computer and associated peripheral costs and the logical sequence of steps in the development of a microprocessor-based process control system are covered in Chapter 5.

  13. Harnessing Science and Technology for preservation and conservation of cultural heritage in Malaysia

    International Nuclear Information System (INIS)

    Adi Taha

    2005-04-01

    Malaysia's heritage is extraordinarily rich. Heritage links people, places and things from our history to the present and to the future. Department of Muzeums and Antiquities work diligently at collecting and preserving the artifacts, written records, oral traditions, special places and lands that make up the Malaysia's history. Over the years our concept of cultural heritage and its role as a central part of the experience of our communities has expanded from a focus on objects and monuments to include our social structures, ways of life, beliefs and systems of knowledge. We seek answers in our attempts to promote the understanding and unity among people that have made our country a nation regardless of ethnic origins and religious affiliations, and to prolong the life essence of our rich heritage. We found a simple but yet, a meaningful answer; Harnessing Science and Technology for Preservation and Conservation of Cultural Heritage in Malaysia. Conservation has gained an increasing importance world over, as there is greater awareness and a sense of urgency about the need to conserve and preserve cultural heritages. Recent years are witnessing unprecedented growth in various fields of science and technology in Malaysia, such as materials technology, medical sciences, biotechnology, information and communications technology. Whichever perspective is used, it is clear that science forms an integral part of Malaysia's culture, in the past as well as now. Fulfilling a vital function as a carrier of knowledge and methodology, sciences places on our shoulders a strong obligation towards future generations. As Malaysians, we have been formed by our cultural heritage. Clearly, we must protect that heritage and continue to enrich and develop it, incorporating new knowledge, new insights, new ideas and new experience. (Author)

  14. Learner-Adaptive Educational Technology for Simulation in Healthcare: Foundations and Opportunities.

    Science.gov (United States)

    Lineberry, Matthew; Dev, Parvati; Lane, H Chad; Talbot, Thomas B

    2018-06-01

    Despite evidence that learners vary greatly in their learning needs, practical constraints tend to favor ''one-size-fits-all'' educational approaches, in simulation-based education as elsewhere. Adaptive educational technologies - devices and/or software applications that capture and analyze relevant data about learners to select and present individually tailored learning stimuli - are a promising aid in learners' and educators' efforts to provide learning experiences that meet individual needs. In this article, we summarize and build upon the 2017 Society for Simulation in Healthcare Research Summit panel discussion on adaptive learning. First, we consider the role of adaptivity in learning broadly. We then outline the basic functions that adaptive learning technologies must implement and the unique affordances and challenges of technology-based approaches for those functions, sharing an illustrative example from healthcare simulation. Finally, we consider future directions for accelerating research, development, and deployment of effective adaptive educational technology and techniques in healthcare simulation.

  15. Reconciling Biodiversity Conservation and Widespread Deployment of Renewable Energy Technologies in the UK.

    Science.gov (United States)

    Gove, Benedict; Williams, Leah J; Beresford, Alison E; Roddis, Philippa; Campbell, Colin; Teuten, Emma; Langston, Rowena H W; Bradbury, Richard B

    2016-01-01

    Renewable energy will potentially make an important contribution towards the dual aims of meeting carbon emission reduction targets and future energy demand. However, some technologies have considerable potential to impact on the biodiversity of the environments in which they are placed. In this study, an assessment was undertaken of the realistic deployment potential of a range of renewable energy technologies in the UK, considering constraints imposed by biodiversity conservation priorities. We focused on those energy sources that have the potential to make important energy contributions but which might conflict with biodiversity conservation objectives. These included field-scale solar, bioenergy crops, wind energy (both onshore and offshore), wave and tidal stream energy. The spatially-explicit analysis considered the potential opportunity available for each technology, at various levels of ecological risk. The resultant maps highlight the energy resource available, physical and policy constraints to deployment, and ecological sensitivity (based on the distribution of protected areas and sensitive species). If the technologies are restricted to areas which currently appear not to have significant ecological constraints, the total potential energy output from these energy sources was estimated to be in the region of 5,547 TWh/yr. This would be sufficient to meet projected energy demand in the UK, and help to achieve carbon reduction targets. However, we highlight two important caveats. First, further ecological monitoring and surveillance is required to improve understanding of wildlife distributions and therefore potential impacts of utilising these energy sources. This is likely to reduce the total energy available, especially at sea. Second, some of the technologies under investigation are currently not deployed commercially. Consequently this potential energy will only be available if continued effort is put into developing these energy sources/technologies

  16. Research on the adaptive optical control technology based on DSP

    Science.gov (United States)

    Zhang, Xiaolu; Xue, Qiao; Zeng, Fa; Zhao, Junpu; Zheng, Kuixing; Su, Jingqin; Dai, Wanjun

    2018-02-01

    Adaptive optics is a real-time compensation technique using high speed support system for wavefront errors caused by atmospheric turbulence. However, the randomness and instantaneity of atmospheric changing introduce great difficulties to the design of adaptive optical systems. A large number of complex real-time operations lead to large delay, which is an insurmountable problem. To solve this problem, hardware operation and parallel processing strategy are proposed, and a high-speed adaptive optical control system based on DSP is developed. The hardware counter is used to check the system. The results show that the system can complete a closed loop control in 7.1ms, and improve the controlling bandwidth of the adaptive optical system. Using this system, the wavefront measurement and closed loop experiment are carried out, and obtain the good results.

  17. Challenges, Strategies and Techniques for International Training in Technology for Cultural Heritage Conservation

    Science.gov (United States)

    Eppich, R.; Almagro Vidal, A.

    2013-07-01

    Technology to document and investigate cultural heritage sites is rapidly advancing - multispectral and high dynamic range imaging, spherical high resolution photography, three-dimensional laser scanning and unmanned aerial vehicles are only a few of the new technologies available to heritage conservation professionals to record monuments, buildings, city centres and landscapes. These advanced tools are giving architects, engineers and conservation professionals' new insights and additional information which helps to make better informed decisions. But this technology and the knowledge about its correct use are extremely unevenly distributed across the world. The Digital Divide is present and growing in the field of cultural heritage preservation (Letellier, 2001). Many of those responsible for the management, maintenance and care of some of the world's most significant cultural heritage sites do not have access to or information about the latest technologies. They are also confronted with an overwhelming assortment of new technologies and consultants or developers that promote them and therefore must allocate their limited budgets with limited information. What is to be done about bridging this gap? Obviously cost and accessibility are issues. However one of the most important challenges to be addressed is education. As the base knowledge of these technologies is very uneven this leads to further questions: Are there strategies or methodologies for teaching this technology? How to combine and balance different professional backgrounds from different and so unevenly distributed places around the world and provide them all with useful information to make good documentation and conservation decisions? This paper will describe the methodology developed over the last ten years in teaching documentation technologies to diverse groups of cultural heritage professionals and students from Côte d'Ivoire, Germany, Belgium, Kosovo, Albania, Nigeria, Egypt, Japan, Iraq

  18. Adaptation of Australia’s Marine Ecosystems to Climate Change: Using Science to Inform Conservation Management

    OpenAIRE

    Johnson, Johanna E.; Holbrook, Neil J.

    2014-01-01

    The challenges that climate change poses for marine ecosystems are already manifesting in impacts at the species, population, and community levels in Australia, particularly in Tasmania and tropical northern Australia. Many species and habitats are already under threat as a result of human activities, and the additional pressure from climate change significantly increases the challenge for marine conservation and management. Climate change impacts are expected to magnify as sea surface temper...

  19. Place-Based Dialogics: Adaptive Cultural and Interpersonal Approaches to Environmental Conservation

    OpenAIRE

    Stacey K. Sowards; Carlos A. Tarin; Sarah D. Upton

    2017-01-01

    This study examines conservation campaigns and how they employ place-based interpersonal communication tactics to better engage local communities in rural locations in Indonesia, Philippines, and Colombia. In collaboration with the non-governmental organization Rare, the authors explore how social marketing campaigns coupled with interpersonal communication can influence communities that are often considered the most marginalized and affected by environmental problems. Field research was cond...

  20. Training program for energy conservation in new-building construction. Volume II. Energy conservation technology: for the building inspector

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-12-01

    A Model Code for Energy Conservation in New Building Construction has been developed by those national organizations primarily concerned with the development and promulgation of model codes. The technical provisions are based on ASHRAE Standard 90-75 and are intended for use by state and local officials. This training manual contains the basic information necessary to acquaint the field building inspector with the concepts of energy conservation in buildings and instructs him in the basic techniques of field inspection of energy compliance.

  1. Energy conservation and technological change as factors in climate change - a pulp and paper industry example

    Energy Technology Data Exchange (ETDEWEB)

    Koleff, A.M. [Stone Container Corp., Tucker, GA (United States)

    1997-12-31

    The Pulp and Paper Industry in the United States is one of this country`s most energy intensive industries with energy generally being the second or third largest direct operating expense in mill budgets. As such, the industry has long had an effective energy conservation program and has recorded impressive reductions in energy use. It is also one of the two most capital intensive industries in the United States and has a long capital investment cycle, which can be estimated by various techniques at between 20 and 30 years. This paper discusses the estimated impact of the industry`s energy conservation achievements on long term emission reductions of greenhouse gases and will show how technological changes within the industry have impacted past emission reductions and the prospects for continued progress through emerging technologies. The importance to the global competitiveness of the industry of implementing technological change designed to reduce the emission of greenhouse gases within the industry`s normal investment cycle will also be reviewed.

  2. Creative ideation and adaptive reuse: a solution to sustainable urban heritage conservation

    Science.gov (United States)

    Hasnain, H.; Mohseni, F.

    2018-03-01

    The rapid phenomenon of urbanization in the last century has resulted in abandonment of historic urban centers and still today attracting people to suburbs and newly developed districts. This urban expansion poses a serious threat to historic properties when people opt to move away leaving behind their heritage. The adaptive reuse of heritage is considered to be a dominant strategy for handling this issue bypassing demolition of heritage properties. However, the adaptive reuse cannot only consider the preservation of the heritage as the structural retrofit or functional revitalization but rather it needs to enunciate the image and the creative ideation that reflect upon the future of heritage. Consequently, this paper aims to examine the role of branding as an innovative source of ideation in the implication of adaptive reuse on heritage. In this regards, the case study of Zalando outlet store in Berlin is selected, which is an old building situated in the commercial district of the city in a wide range of styles and heritage buildings from the middle ages. This research uses semi-structured interviews to examine the significance of Brand making in a successful adaptive reuse process. The findings indicate that the importance of the outlet building lies not only in its physical fabric or commercial aspects, but the spirit of the place that lies in the magical essence of big labels as emblems. This underlying essence of place stimulated the adaptation of building in a way that it surpasses the physical and functional aspect of a building and makes it merge in new times and new sustainable development.

  3. Prevalence, attitudes, and knowledge of in-vehicle technologies and vehicle adaptations among older drivers.

    Science.gov (United States)

    Eby, David W; Molnar, Lisa J; Zakrajsek, Jennifer S; Ryan, Lindsay H; Zanier, Nicole; Louis, Renée M St; Stanciu, Sergiu C; LeBlanc, David; Kostyniuk, Lidia P; Smith, Jacqui; Yung, Raymond; Nyquist, Linda; DiGuiseppi, Carolyn; Li, Guohua; Mielenz, Thelma J; Strogatz, David

    2018-04-01

    The purpose of the present study was to gain a better understanding of the types of in-vehicle technologies being used by older drivers as well as older drivers' use, learning, and perceptions of safety related to these technologies among a large cohort of older drivers at multiple sites in the United States. A secondary purpose was to explore the prevalence of aftermarket vehicle adaptations and how older adults go about making adaptations and how they learn to use them. The study utilized baseline questionnaire data from 2990 participants from the Longitudinal Research on Aging Drivers (LongROAD) study. Fifteen in-vehicle technologies and 12 aftermarket vehicle adaptations were investigated. Overall, 57.2% of participants had at least one advanced technology in their primary vehicle. The number of technologies in a vehicle was significantly related to being male, having a higher income, and having a higher education level. The majority of respondents learned to use these technologies on their own, with "figured-it-out-myself" being reported by 25%-75% of respondents across the technologies. Overall, technologies were always used about 43% of the time, with wide variability among the technologies. Across all technologies, nearly 70% of respondents who had these technologies believed that they made them a safer driver. With regard to vehicle adaptations, less than 9% of respondents had at least one vehicle adaptation present, with the number of adaptations per vehicle ranging from 0 to 4. A large majority did not work with a professional to make or learn about the aftermarket vehicle adaptation. Copyright © 2018 Elsevier Ltd. All rights reserved.

  4. Adaptation Strategies of Soil and Water Conservation in Taiwan for Extreme Climate

    Science.gov (United States)

    Huang, Wen-Cheng; Lin, Cheng-Yu; Hsieh, Ting-Ju

    2016-04-01

    Due to global climate change, the impact caused by extreme climate has become more and more compelling. In Taiwan, the total rainfall stays in the same level, but it brings along changes to rain types. The rainfall with high recurrence interval happens frequently, leading to soil loss of slope-land, and it may further result in flooding and sediment hazards. Although Taiwan is a small island, the population density is ranked at the second highest around the world. Moreover, third-fourth of Taiwan is slope-land, so the soil and water conservation is rather important. This study is based on the international trend analysis approach to review the related researches worldwide and 264 research projects in Taiwan. It indicates that under the pressure of extreme climate and social economic changes, it has higher possibility of slope-land to face the impacts from extreme rainfall events, and meanwhile, the carrying capacity of slope-land is decreasing. The experts' brainstorming meetings were held three times, and it concluded the current problems of soil and water conservation and the goal in 2025 for sustainable resources. Also, the 20-year weather data set was adopted to screen out 3 key watersheds with the potential of flooding (Puzih River Watershed), droughts (Xindian River Watershed), and sediment hazards (Chishan River Watershed) according to the moisture index, and further, to propose countermeasures in order to realize the goal in 2025, which is "regarding to climate and socioeconomic changes, it is based on multiple use to manage watershed resources for avoiding disasters and sustaining soil and water conservation." Keyword: Extreme climate, International trend analysis, Brainstorming, Key watershed

  5. Development of a natural practice to adapt conservation goals to global change.

    Science.gov (United States)

    Heller, Nicole E; Hobbs, Richard J

    2014-06-01

    Conservation goals at the start of the 21st century reflect a combination of contrasting ideas. Ideal nature is something that is historically intact but also futuristically flexible. Ideal nature is independent from humans, but also, because of the pervasiveness of human impacts, only able to reach expression through human management. These tensions emerge in current management rationales because scientists and managers are struggling to accommodate old and new scientific and cultural thinking, while also maintaining legal mandates from the past and commitments to preservation of individual species in particular places under the stresses of global change. Common management goals (such as integrity, wilderness, resilience), whether they are forward looking and focused on sustainability and change, or backward looking and focused on the persistence and restoration of historic states, tend to create essentialisms about how ecosystems should be. These essentialisms limit the options of managers to accommodate the dynamic, and often novel, response of ecosystems to global change. Essentialisms emerge because there is a tight conceptual coupling of place and historical species composition as an indicator of naturalness (e.g., normal, healthy, independent from humans). Given that change is increasingly the norm and ecosystems evolve in response, the focus on idealized ecosystem states is increasingly unwise and unattainable. To provide more open-ended goals, we propose greater attention be paid to the characteristics of management intervention. We suggest that the way we interact with other species in management and the extent to which those interactions reflect the interactions among other biotic organisms, and also reflect our conservation virtues (e.g., humility, respect), influences our ability to cultivate naturalness on the landscape. We call this goal a natural practice (NP) and propose it as a framework for prioritizing and formulating how, when, and where to

  6. Place-Based Dialogics: Adaptive Cultural and Interpersonal Approaches to Environmental Conservation

    Directory of Open Access Journals (Sweden)

    Stacey K. Sowards

    2017-09-01

    Full Text Available This study examines conservation campaigns and how they employ place-based interpersonal communication tactics to better engage local communities in rural locations in Indonesia, Philippines, and Colombia. In collaboration with the non-governmental organization Rare, the authors explore how social marketing campaigns coupled with interpersonal communication can influence communities that are often considered the most marginalized and affected by environmental problems. Field research was conducted in Indonesia since 2008 and Colombia since 2014. Ethnography through participant observation and interviews were primary methods for data collection as well as a thorough analysis of organizational documents, such as websites, blogs, reports, and other written work. Using theories of dialogue and place-based studies of interpersonal communication, three key campaign strategies emerged from our research. First, cooperative engagement through semi-formalized information sharing is an important component of building a campaign in rural areas, which might include key stakeholder meetings, relationship building with local governmental, religious, and community leaders, and training sessions with local farmers or fishers. A second approach is based on critical listening and understanding through word of mouth involvement, such as community activities and improved understanding of the challenges that local people face in their communities. Finally, a third approach relates to the recognition of difference through engaging local culture. Campaign managers have used religious leaders, local languages, traditional customs and activities, and other place-based approaches to create inclusive conservation campaigns. These strategies demonstrate that conservation campaigns require intense interpersonal dialogue, long-term commitment, and place-based understanding.

  7. Adapting a Natura 2000 field guideline for a remote sensing-based assessment of heathland conservation status

    Science.gov (United States)

    Schmidt, Johannes; Fassnacht, Fabian Ewald; Neff, Christophe; Lausch, Angela; Kleinschmit, Birgit; Förster, Michael; Schmidtlein, Sebastian

    2017-08-01

    Remote sensing can be a valuable tool for supporting nature conservation monitoring systems. However, for many areas of conservation interest, there is still a considerable gap between field-based operational monitoring guidelines and the current remote sensing-based approaches. This hampers application in practice of the latter. Here, we propose a remote sensing approach for mapping the conservation status of Calluna-dominated Natura 2000 dwarf shrub habitats that is closely related to field mapping schemes. We transferred the evaluation criteria of the field guidelines to three related variables that can be captured by remote sensing: (1) coverage of the key species, (2) stand structural diversity, and (3) co-occurring species. Continuous information on these variables was obtained by regressing ground reference data from field surveys and UAV flights against airborne hyperspectral imagery. Merging the three resulting quality layers in an RGB representation allowed for illustrating the habitat quality in a continuous way. User-defined thresholds can be applied to this stack of quality layers to derive an overall assessment of habitat quality in terms of nature conservation, i.e. the conservation status. In our study, we found good accordance of the remotely sensed data with field-based information for the three variables key species, stand structural diversity and co-occurring vegetation (R2 of 0.79, 0.69, and 0.71, respectively) and it was possible to derive meaningful habitat quality maps. The conservation status could be derived with an accuracy of 65%. In interpreting these results it should be considered that the remote sensing based layers are independent estimates of habitat quality in their own right and not a mere replacement of the criteria used in the field guidelines. The approach is thought to be transferable to similar regions with minor adaptions. Our results refer to Calluna heathland which we consider a comparably easy target for remote sensing

  8. Computing the dynamics of biomembranes by combining conservative level set and adaptive finite element methods

    OpenAIRE

    Laadhari , Aymen; Saramito , Pierre; Misbah , Chaouqi

    2014-01-01

    International audience; The numerical simulation of the deformation of vesicle membranes under simple shear external fluid flow is considered in this paper. A new saddle-point approach is proposed for the imposition of the fluid incompressibility and the membrane inextensibility constraints, through Lagrange multipliers defined in the fluid and on the membrane respectively. Using a level set formulation, the problem is approximated by mixed finite elements combined with an automatic adaptive ...

  9. Incorporating a Socio-Ecological-Technological Systems (SETS) perspective into the adaptive management framework

    Science.gov (United States)

    Incorporating a social-ecological-technological systems (SETS) perspective to the adaptive management process requires that stakeholders and managers conceptualize restoration projects as part of coupled human and natural systems and assess underlying social drivers and accrued b...

  10. New Technological Interventions in Conservation Conflicts: Countering Emotions and Contested Knowledge.

    Science.gov (United States)

    Verma, Audrey; van der Wal, René; Fischer, Anke

    2017-01-01

    New technologies have increasingly featured in environmental conservation conflicts. We examined the deployment of imaging devices such as sonar equipment and cameras to survey the Fal estuary in Cornwall, UK. Due to heavy use of these waters, there have been several disputes coalescing around protected marine features, including the estuary's rare maerl beds. A comparison of two cases, scallop dredging and docks development, showed technical instruments being deployed to produce information about the marine environment as evidence to inform decision-making. The use of imaging devices stimulated political action and was regarded as a move away from emotion-based decision-making towards desired objectivity. Simultaneously, however, the process of deploying these devices was challenged and there was recognition that the resultant information could be used to construct the estuary as a politically charged space. Thus, rather than clarifying and resolving contentious issues, technological interventions generated new baselines for knowledge contestation and amplified ongoing battles for credibility and authority.

  11. Using assistive technology adaptations to include students with learning disabilities in cooperative learning activities.

    Science.gov (United States)

    Bryant, D P; Bryant, B R

    1998-01-01

    Cooperative learning (CL) is a common instructional arrangement that is used by classroom teachers to foster academic achievement and social acceptance of students with and without learning disabilities. Cooperative learning is appealing to classroom teachers because it can provide an opportunity for more instruction and feedback by peers than can be provided by teachers to individual students who require extra assistance. Recent studies suggest that students with LD may need adaptations during cooperative learning activities. The use of assistive technology adaptations may be necessary to help some students with LD compensate for their specific learning difficulties so that they can engage more readily in cooperative learning activities. A process for integrating technology adaptations into cooperative learning activities is discussed in terms of three components: selecting adaptations, monitoring the use of the adaptations during cooperative learning activities, and evaluating the adaptations' effectiveness. The article concludes with comments regarding barriers to and support systems for technology integration, technology and effective instructional practices, and the need to consider technology adaptations for students who have learning disabilities.

  12. Importance of nuclear technology in the conservation and production of nutritional fungi

    International Nuclear Information System (INIS)

    Sajet, A.S.

    2008-01-01

    The shortfall in food and field crops due to bad weather and the incidence of insects and microbes during harvesting, handling and storage under non-suitable conditions, called the attention of researchers to try to minimize the damage happening and by various means, whether to develop sources of new food, such as producing nutritional fungi, or by following non-traditional methods of anti-microbes and insects such as the use of radiation as a safe and successful way to save the food without any toxic effects. Permits have been issued for food irradiation by many international organizations including IAEA, World Health Organization and FAO. Nutritional fungi is one of the food sources used as food fit for human consumption in various countries around the world due to their importance which includes many aspects: the nutritional and health value; medical significance; environmental importance and industrial importance. Nuclear technology has contributed in many of the developments in the production and conservation of nutritional fungi, notably, biological studies of nutritional fungi, production technology of fungus, the role of radiation in the preparation and improvement of the nutritional media, improvement of the fungus strains, the use of radiation in the conservation of nutritional fungi and the detection of irradiated nutritional fungus.

  13. ASEAN--USAID Buildings Energy Conservation Project final report. Volume 2, Technology

    Energy Technology Data Exchange (ETDEWEB)

    Levine, M.D.; Busch, J.F. [eds.

    1992-06-01

    This volume reports on research in the area of energy conservation technology applied to commercial buildings in the Association of Southeast Asian Nations (ASEAN) region. Unlike Volume I of this series, this volume is a compilation of original technical papers prepared by different authors in the project. In this regard, this volume is much like a technical journal. The papers that follow report on research conducted by both US and ASEAN researchers. The authors representing Indonesia, Malaysia, Philippines, and Thailand, come from a range of positions in the energy arena, including government energy agencies, electric utilities, and universities. As such, they account for a wide range of perspectives on energy problems and the role that technology can play in solving them. This volume is about using energy more intelligently. In some cases, the effort is towards the use of more advanced technologies, such as low-emittance coatings on window glass, thermal energy storage, or cogeneration. In others, the emphasis is towards reclaiming traditional techniques for rendering energy services, but in new contexts such as lighting office buildings with natural light, or cooling buildings of all types with natural ventilation. Used in its broadest sense, the term ``technology`` encompasses all of the topics addressed in this volume. Along with the more customary associations of technology, such as advanced materials and equipment and the analysis of their performance, this volume treats design concepts and techniques, analysis of ``secondary`` impacts from applying technologies (i.e., unintended impacts, or impacts on parties not directly involved in the purchase and use of the technology), and the collection of primary data used for conducting technical analyses.

  14. L(sub 1) Adaptive Flight Control System: Flight Evaluation and Technology Transition

    Science.gov (United States)

    Xargay, Enric; Hovakimyan, Naira; Dobrokhodov, Vladimir; Kaminer, Isaac; Gregory, Irene M.; Cao, Chengyu

    2010-01-01

    Certification of adaptive control technologies for both manned and unmanned aircraft represent a major challenge for current Verification and Validation techniques. A (missing) key step towards flight certification of adaptive flight control systems is the definition and development of analysis tools and methods to support Verification and Validation for nonlinear systems, similar to the procedures currently used for linear systems. In this paper, we describe and demonstrate the advantages of L(sub l) adaptive control architectures for closing some of the gaps in certification of adaptive flight control systems, which may facilitate the transition of adaptive control into military and commercial aerospace applications. As illustrative examples, we present the results of a piloted simulation evaluation on the NASA AirSTAR flight test vehicle, and results of an extensive flight test program conducted by the Naval Postgraduate School to demonstrate the advantages of L(sub l) adaptive control as a verifiable robust adaptive flight control system.

  15. Application of sperm sorting and associated reproductive technology for wildlife management and conservation.

    Science.gov (United States)

    O'Brien, J K; Steinman, K J; Robeck, T R

    2009-01-01

    Efforts toward the conservation and captive breeding of wildlife can be enhanced by sperm sorting and associated reproductive technologies such as sperm cryopreservation and artificial insemination (AI). Sex ratio management is of particular significance to species which naturally exist in female-dominated social groups. A bias of the sex ratio towards females of these species will greatly assist in maintaining socially cohesive groups and minimizing male-male aggression. Another application of this technology potentially exists for endangered species, as the preferential production of females can enable propagation of those species at a faster rate. The particular assisted reproductive technology (ART) used in conjunction with sperm sorting for the production of offspring is largely determined by the quality and quantity of spermatozoa following sorting and preservation processes. Regardless of the ART selected, breeding decisions involving sex-sorted spermatozoa should be made in conjunction with appropriate genetic management. Zoological-based research on reproductive physiology and assisted reproduction, including sperm sorting, is being conducted on numerous terrestrial and marine mammals. The wildlife species for which the technology has undergone the most advance is the bottlenose dolphin. AI using sex-sorted fresh or frozen-thawed spermatozoa has become a valuable tool for the genetic and reproductive management of captive bottlenose dolphins with six pre-sexed calves, all of the predetermined sex born to date.

  16. Renewable energy technologies and its adaptation in an urban environment

    Energy Technology Data Exchange (ETDEWEB)

    Thampi, K. Ravindranathan, E-mail: ravindranathan.thampi@ucd.ie; Byrne, Owen, E-mail: ravindranathan.thampi@ucd.ie; Surolia, Praveen K., E-mail: ravindranathan.thampi@ucd.ie [SFI Strategic Research Cluster in Solar Energy Conversion, School of Chemical and Bioprocess Engineering, University College Dublin, Belfield, Dublin 4 (Ireland)

    2014-01-28

    This general article is based on the inaugural talk delivered at the opening of OMTAT 2013 conference. It notes that the integration of renewable energy sources into living and transport sectors presents a daunting task, still. In spite of the fact that the earth and its atmosphere continually receive 1.7 × 10{sup 17} watts of radiation from the sun, in the portfolio of sustainable and environment friendly energy options, which is about 16% of the world’s energy consumption and mostly met by biomass, only a paltry 0.04% is accredited to solar. First and second generation solar cells offer mature technologies for applications. The most important difficulty with regards to integration with structures is not only the additional cost, but also the lack of sufficient knowledge in managing the available energy smartly and efficiently. The incorporation of PV as a part of building fabric greatly reduces the overall costs compared with retrofitting. BIPV (Building Integrated photovoltaic) is a critical technology for establishing aesthetically pleasing solar structures. Infusing PV and building elements is greatly simplified with some of the second generation thin film technologies now manufactured as flexible panels. The same holds true for 3{sup rd} generation technologies under development such as, and dye- and quantum dot- sensitized solar cells. Additionally, these technologies offer transparent or translucent solar cells for incorporation into windows and skylights. This review deals with the present state of solar cell technologies suitable for BIPV and the status of BIPV applications and its future prospects.

  17. Ecological adaptation of wild peach palm, its in situ conservation and deforestation-mediated extinction in southern Brazilian Amazonia.

    Directory of Open Access Journals (Sweden)

    Charles R Clement

    Full Text Available BACKGROUND: The Arc of Fire across southern Amazonia seasonally attracts worldwide attention as forests are cut and burned for agricultural expansion. These forests contain numerous wild relatives of native South American crops, such as peach palm. METHODOLOGY/PRINCIPAL FINDINGS: Our prospecting expeditions examined critical areas for wild peach palm in the Arc of Fire in Mato Grosso, Pará, Maranhão and Tocantins, as well as areas not previously examined in Amazonas and Amapá states. Recent digitization of the RADAM Brasil project permitted comparison among RADAM's parataxonomists' observations, previous botanical collections and our prospecting. Mapping on soils and vegetation types enabled us to hypothesize a set of ecological preferences. Wild peach palm is best adapted to Ultisols (Acrisols in open forests across the Arc of Fire and westward into the more humid western Amazonia. Populations are generally small (fewer than 10 plants on slopes above watercourses. In northern Mato Grosso and southern Pará soybean fields and pastures now occupy numerous areas where RADAM identified wild peach palm. The controversial BR-163 Highway is already eroding wild peach palm as deforestation expands. CONCLUSIONS/SIGNIFICANCE: Many of these populations are now isolated by increasing forest fragmentation, which will lead to decreased reproduction via inbreeding depression and eventual extinction even without complete deforestation. Federal conservation areas are less numerous in the Arc of Fire than in other parts of Brazilian Amazonia, although there are indigenous lands; these conservation areas contain viable populations of wild peach palm and require better protection than they are currently receiving. Ex situ conservation of these populations is not viable given the relative lack of importance of domesticated peach palm and the difficulty of maintaining even economically interesting genetic resources.

  18. Ecological adaptation of wild peach palm, its in situ conservation and deforestation-mediated extinction in southern Brazilian Amazonia.

    Science.gov (United States)

    Clement, Charles R; Santos, Ronaldo P; Desmouliere, Sylvain J M; Ferreira, Evandro J L; Neto, João Tomé Farias

    2009-01-01

    The Arc of Fire across southern Amazonia seasonally attracts worldwide attention as forests are cut and burned for agricultural expansion. These forests contain numerous wild relatives of native South American crops, such as peach palm. Our prospecting expeditions examined critical areas for wild peach palm in the Arc of Fire in Mato Grosso, Pará, Maranhão and Tocantins, as well as areas not previously examined in Amazonas and Amapá states. Recent digitization of the RADAM Brasil project permitted comparison among RADAM's parataxonomists' observations, previous botanical collections and our prospecting. Mapping on soils and vegetation types enabled us to hypothesize a set of ecological preferences. Wild peach palm is best adapted to Ultisols (Acrisols) in open forests across the Arc of Fire and westward into the more humid western Amazonia. Populations are generally small (fewer than 10 plants) on slopes above watercourses. In northern Mato Grosso and southern Pará soybean fields and pastures now occupy numerous areas where RADAM identified wild peach palm. The controversial BR-163 Highway is already eroding wild peach palm as deforestation expands. Many of these populations are now isolated by increasing forest fragmentation, which will lead to decreased reproduction via inbreeding depression and eventual extinction even without complete deforestation. Federal conservation areas are less numerous in the Arc of Fire than in other parts of Brazilian Amazonia, although there are indigenous lands; these conservation areas contain viable populations of wild peach palm and require better protection than they are currently receiving. Ex situ conservation of these populations is not viable given the relative lack of importance of domesticated peach palm and the difficulty of maintaining even economically interesting genetic resources.

  19. A case for Sandia investment in complex adaptive systems science and technology.

    Energy Technology Data Exchange (ETDEWEB)

    Colbaugh, Richard; Tsao, Jeffrey Yeenien; Johnson, Curtis Martin; Backus, George A.; Brown, Theresa Jean; Jones, Katherine A.

    2012-05-01

    This white paper makes a case for Sandia National Laboratories investments in complex adaptive systems science and technology (S&T) -- investments that could enable higher-value-added and more-robustly-engineered solutions to challenges of importance to Sandia's national security mission and to the nation. Complex adaptive systems are ubiquitous in Sandia's national security mission areas. We often ignore the adaptive complexity of these systems by narrowing our 'aperture of concern' to systems or subsystems with a limited range of function exposed to a limited range of environments over limited periods of time. But by widening our aperture of concern we could increase our impact considerably. To do so, the science and technology of complex adaptive systems must mature considerably. Despite an explosion of interest outside of Sandia, however, that science and technology is still in its youth. What has been missing is contact with real (rather than model) systems and real domain-area detail. With its center-of-gravity as an engineering laboratory, Sandia's has made considerable progress applying existing science and technology to real complex adaptive systems. It has focused much less, however, on advancing the science and technology itself. But its close contact with real systems and real domain-area detail represents a powerful strength with which to help complex adaptive systems science and technology mature. Sandia is thus both a prime beneficiary of, as well as potentially a prime contributor to, complex adaptive systems science and technology. Building a productive program in complex adaptive systems science and technology at Sandia will not be trivial, but a credible path can be envisioned: in the short run, continue to apply existing science and technology to real domain-area complex adaptive systems; in the medium run, jump-start the creation of new science and technology capability through Sandia's Laboratory Directed Research

  20. Self-adaptive phosphor coating technology for wafer-level scale chip packaging

    International Nuclear Information System (INIS)

    Zhou Linsong; Rao Haibo; Wang Wei; Wan Xianlong; Liao Junyuan; Wang Xuemei; Zhou Da; Lei Qiaolin

    2013-01-01

    A new self-adaptive phosphor coating technology has been successfully developed, which adopted a slurry method combined with a self-exposure process. A phosphor suspension in the water-soluble photoresist was applied and exposed to LED blue light itself and developed to form a conformal phosphor coating with self-adaptability to the angular distribution of intensity of blue light and better-performing spatial color uniformity. The self-adaptive phosphor coating technology had been successfully adopted in the wafer surface to realize a wafer-level scale phosphor conformal coating. The first-stage experiments show satisfying results and give an adequate demonstration of the flexibility of self-adaptive coating technology on application of WLSCP. (semiconductor devices)

  1. Conservative multi-implicit integral deferred correction methods with adaptive mesh refinement

    International Nuclear Information System (INIS)

    Layton, A.T.

    2004-01-01

    In most models of reacting gas dynamics, the characteristic time scales of chemical reactions are much shorter than the hydrodynamic and diffusive time scales, rendering the reaction part of the model equations stiff. Moreover, nonlinear forcings may introduce into the solutions sharp gradients or shocks, the robust behavior and correct propagation of which require the use of specialized spatial discretization procedures. This study presents high-order conservative methods for the temporal integration of model equations of reacting flows. By means of a method of lines discretization on the flux difference form of the equations, these methods compute approximations to the cell-averaged or finite-volume solution. The temporal discretization is based on a multi-implicit generalization of integral deferred correction methods. The advection term is integrated explicitly, and the diffusion and reaction terms are treated implicitly but independently, with the splitting errors present in traditional operator splitting methods reduced via the integral deferred correction procedure. To reduce computational cost, time steps used to integrate processes with widely-differing time scales may differ in size. (author)

  2. HEALTH TECHNOLOGIES FOR INCREASING ADAPTIVE CAPABILITIESOF PREGNANT WOMEN

    Directory of Open Access Journals (Sweden)

    T. S. Krivonogova

    2014-01-01

    Full Text Available Our research is aimed to investigate the influence of breathing exercises and aqua-gymnastics on the adaptive capabilities of pregnant women in different trimesters of gestation.The estimation of adaptive capabilities of the pregnant women organism was carried out on the basis of functional tests on breath-holding duration – Stange’s test (for inhalation and Ghencea’s test (for exhalation in the initial period, 11–19, 21–29 and 31–39 weeks periods of pregnancy.To identify the adaptation strategies for pregnant women the method proposed by Ya.S. Pekker and A. Rotov was used, namely, the consideration of information measure as a measure of biological object preference behavior. Analysis of the results with information criterion of curve types using cluster analysis allowed to identify 4 standard types of adaptation strategies for pregnant women: adaptive, compensatory, compensatory-adaptive and maladaptive compensatory type of response. To estimate the adaptive capabilities of the respiratory system the ratio between the level of respiratory system functioning, its functional reserve and the degree of stress regulation mechanisms was considered.The intensity of lipid peroxidation processes (LPO in the blood serum of pregnant women was assessed by determining malondialdehyde (MDA in the reaction with 2-thiobarbituric acid. Determination of vitamin D content in blood serum was estimated by fluorimetric method using spectrophotometer «Hitachi-85» (Japan at an excitation wavelength of 295 nm and 320 nm fluorescence. Determination of the level of stress hormones (cortisol, insulin in the blood serum of pregnant women was performed by radio ligand assay.The following somatic diseases were registered among pregnant women applying to hospital: chronic tonsillitis, sinusitis, vasomotor rhinitis, bronchitis, bronchial asthma, hay fever, chronic pyelonephritis, atopic dermatitis. The next prenatal risks were revealed: morning sickness in I

  3. Risk calculations for energy conservation technologies: the likelihood of realizing design-phase expectations in new construction

    Energy Technology Data Exchange (ETDEWEB)

    Greden, Lara; Vaidya, Prasad; Baker, Chris; Eijadi, David; McDougall, Tom [The Weidt Group (United States)

    2007-07-01

    The risk that a technology will not be implemented or operated as designed is a significant barrier that impedes owners from adopting new energy-conserving building technologies. This results in a feedback loop that encourages decision makers to minimize risk by sticking with the status quo, regardless of the environmental impact. Different technology categories have different levels and types of risks associated with them.This study assigns levels of risk to technologies by tracing a set of envelope systems, lighting designs, lighting controls, HVAC systems, and HVAC controls in a data set of 38 buildings from the design phase through the initial implementation phase. The likelihood that a technology gets implemented and works as expected is assessed, and risk factors for the various technologies are calculated. Explanations for the levels of risk are supported by interviews with third-party reviewers who serve to assist design teams and owners through the construction phase. Results show that daylighting technologies, including dimming daylighting controls, have the highest risk of not being implemented - when otherwise chosen at the selection phase - while roof insulation and lighting designs are most likely to be fully and correctly implemented. Analysis comparing the risk to the energy conservation opportunity indicates the need for prioritization and support during the design and construction phases to realize expected levels of energy conservation. Overall, the interviewees said the most common reasons for lower than expected energy savings are that energy conservation measures were cut-out during value engineering or cut-out due to later decisions that a technology was functionally risky. This research supports large scale investments in energy conservation technologies for buildings through rebate programs, code improvements, and design guides created by large owners. It identifies technologies that need a higher degree of building management effort and

  4. Adapted Technology for Small-scale Manufacture of Caerphilly-Type ...

    African Journals Online (AJOL)

    Adapted Technology for Small-scale Manufacture of Caerphilly-Type Cheese from Cow's Milk in the Western Highlands Region of Cameroon. ... The production of the cheese should be encouraged at the household level. The Journal of Food Technology in Africa Volume 5 Number 4 (October - December 2000), pp. 120- ...

  5. Radiation technology for conservation of the environment. Proceedings of a symposium

    International Nuclear Information System (INIS)

    1998-06-01

    In September 1997 the IAEA held an International Symposium in Zakopane, Poland, on the applications of radiation technology in conservation of environment. The symposium attended 110 participants representing 38 Member States. The objective was to review the status of current developments and applications of radiation processing in the control of environment pollution and to discuss future developments. The scientific programme covered a wide range of different applications of radiation technology, such as purification of exhaust gases, decontamination of wastewater from industrial and municipal sources, sewage sludge treatment, disinfection and detoxication of solid waste, recycling and the treatment of plastic and solid waste. The document contains full presentations. The symposium (56 papers) was held in 10 sessions as follows: Purification of Exhaust Gases (8 papers); Radiation Chemistry and the Environment (5 papers); Purification and Decontamination of Water (10 papers); Sewage Sludge Treatment (6 papers); Biomedical Applications (5 papers); Recycling and Treatment of Plastic and Solid Wastes (4 papers); Facilities (4 papers); Quality Assurance, Quality Control (4 papers); Transfer of Technology through Technical Co-Operation (5 papers); Curing, Cross-Linking and Grafting (5 papers). A separate abstract and indexing were provided for each paper

  6. Radiation technology for conservation of the environment. Proceedings of a symposium

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-06-01

    In September 1997 the IAEA held an International Symposium in Zakopane, Poland, on the applications of radiation technology in conservation of environment. The symposium attended 110 participants representing 38 Member States. The objective was to review the status of current developments and applications of radiation processing in the control of environment pollution and to discuss future developments. The scientific programme covered a wide range of different applications of radiation technology, such as purification of exhaust gases, decontamination of wastewater from industrial and municipal sources, sewage sludge treatment, disinfection and detoxication of solid waste, recycling and the treatment of plastic and solid waste. The document contains full presentations. The symposium (56 papers) was held in 10 sessions as follows: Purification of Exhaust Gases (8 papers); Radiation Chemistry and the Environment (5 papers); Purification and Decontamination of Water (10 papers); Sewage Sludge Treatment (6 papers); Biomedical Applications (5 papers); Recycling and Treatment of Plastic and Solid Wastes (4 papers); Facilities (4 papers); Quality Assurance, Quality Control (4 papers); Transfer of Technology through Technical Co-Operation (5 papers); Curing, Cross-Linking and Grafting (5 papers). A separate abstract and indexing were provided for each paper Refs, figs, tabs

  7. Adapting UASB technology for sewage treatment in Palestine and Jordan

    NARCIS (Netherlands)

    Mahmoud, N.A.; Zeeman, G.; Lier, van J.B.

    2008-01-01

    High rate anaerobic technologies offer cost-effective solutions for "sewage" treatment in the temperate climate of Palestine and Jordan. However, local sewage characteristics demand amendments to the conventional UASB reactor design. A solution is found in a parallel operating digester unit that

  8. Using FML and fuzzy technology in adaptive ambient intelligent environments

    NARCIS (Netherlands)

    Acampora, G.; Loia, V.

    2005-01-01

    Ambient Intelligence (AmI, shortly) gathers best re-sults from three key technologies, Ubiquitous Computing, Ubiq-uitous Communication, and Intelligent User Friendly Inter-faces. The functional and spatial distribution of tasks is a natu-ral thrust to employ multi-agent paradigm to design and

  9. Technology Needs for Teachers Web Development and Curriculum Adaptations

    Science.gov (United States)

    Carroll, Christy J.

    1999-01-01

    Computer-based mathematics and science curricula focusing on NASA inventions and technologies will enhance current teacher knowledge and skills. Materials and interactive software developed by educators will allow students to integrate their various courses, to work cooperatively, and to collaborate with both NASA scientists and students at other locations by using computer networks, email and the World Wide Web.

  10. Training program for energy conservation in new-building construction. Volume IV. Energy conservation technology: advanced course for plan examiners

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-12-01

    A Model Code for Energy Conservation in New Building Construction has been developed by those national organizations primarily concerned with the development and promulgation of model codes. The technical provisions are based on ASHRAE Standard 90-75 and are intended for use by state and local officials. This manual contains a more in-depth training in the review techniques and concepts required by the plan examiners and code officials in administering the code for conventional (buildings of 3 stories or less) construction.

  11. Institutional adaptation in the UK nuclear technology industry

    International Nuclear Information System (INIS)

    Kemp, R.

    1986-01-01

    Public inquiries into controversial development proposals have themselves become increasing controversial in recent years. Despite their increasing length and cost, such proceedings remain part of the administrative process - the Inspector's report serving to 'inform the minister's mind'. This paper examines certain features of the Sizewell B Inquiry and draws attention to the ability of the applicants to respond to criticisms raised at the hearings through various forms of institutional adaptation. Changes to the Central Electricity Generating Board's case on the organization of project management, to the management of the nuclear site licensing process, and to provisions for future nuclear reactor choice are highlighted. Significantly, each of these areas had been the subject of particular investigations undertaken at the behest of the inquiry Inspector. The paper concludes by raising a number of questions concerning the implications of this singularly interactive process. (author)

  12. Mitigating climate change: Decomposing the relative roles of energy conservation, technological change, and structural shift

    International Nuclear Information System (INIS)

    Mishra, Gouri Shankar; Zakerinia, Saleh; Yeh, Sonia; Teter, Jacob; Morrison, Geoff

    2014-01-01

    We decompose the contribution of five drivers of energy use and CO 2 emissions reductions in achieving climate change goals over 2005–2100 for various climate policy scenarios. This study contributes to the decomposition literature in three ways. First, it disaggregates drivers of energy demand into technological progress and demand for energy services, represented in terms of useful energy, allowing us to estimate their contributions independently — an improvement over other economy-wide decomposition studies. Secondly, this approach reduces the ambiguity present in many previous measures of structural change. We delineate structural shifts into two separate measures: changes in fuel mix within a given resource or service pathway; and changes in mix among distinct energy resources or end-use services. Finally, this study applies decomposition methods to energy and emission trajectories from two mutually informing perspectives: (i) primary energy resources — crude oil, natural gas, coal, nuclear, and renewables; and (ii) end-uses of energy services — residential and commercial buildings, industry, and transportation. Our results show that technological improvements and energy conservation are important in meeting climate goals in the first half of the coming century; and that nuclear and renewable energy and CCS technology are crucial in meeting more stringent goals in the second half of the century. We examine the relative roles of the drivers in reducing CO 2 emissions separately for developed and developing regions. Although the majority of energy and emission growth – and by extension the greatest opportunities for mitigation – will occur in developing countries, the decomposition shows that the relative roles of the five drivers are broadly consistent between these two regions. - Highlights: • We decompose the contribution of five drivers of energy use and CO2 emissions reductions in achieving climate change goals • We analyze differences

  13. Adaptive Seat Energy Absorbers for Enhanced Crash Safety: Technology Demonstration

    Science.gov (United States)

    2016-08-01

    is no pressing need for MREA refinement. However, should an increase in MREA yield force be desired, the project team explored 2 simple refinements...team developed a servo motor controller and data acquisition program using dSPACE real-time system. From the preliminary test, the preloaded Terfenol...Technology; 1940. b Oberg E, editor. Machinery’s handbook: eighteenth edition. Norwalk (CT): Industrial Press ; 1968. c Quayle JP, editor. Kempe’s

  14. Petrographic microscope investigation of mortar and ceramic technologies for the conservation of the built heritage

    Science.gov (United States)

    Pavia, S.; Caro, S.

    2007-07-01

    Polarised-light (or petrographic) microscopy has been widely applied to heritage materials to assess composition and diagnose damage. However, instead, this paper focuses on the petrographic investigation of brick and mortar technologies for the production of quality repair materials compatible with their adjacent fabrics. Furthermore, the paper relates production technologies to the physical properties of the materials fabricated, and thus their final quality and durability. According to Cesare Brandi´s theory of compatibility (the 20th century architect on whose work modern conservation theory and practice are largely based) existing historic materials should be replaced with their equivalent. This paper demonstrates that polarised-light microscopy provides data on the origin and nature of raw materials, and processing parameters such as blending, mixing, firing, calcination and slaking, and how these relate to the quality of the final product. In addition, this paper highlights the importance of production technologies as these directly impact the physical properties of the materials fabricated and thus determine their final quality and durability. In this context, the paper investigates mortar calcination and slaking, two important operations in the manufacture of building limes that govern the reactivity, shrinkage and water retention of a lime binder which will impact mortar's properties such as workability, plasticity and carbonation speed, and these in turn will determine the ease of execution, durability and strength of a lime mortar. Petrographic analysis also provides evidence of ceramic technology including identification of local or foreign production and processing parameters such as sieving, blending, mixing and firing. A petrographic study of the ceramic matrix coupled to the diagnosis of mineral phases formed during firing allows to quantify sintering and vitrification and thus determine firing temperatures. Finally, certain features of the raw

  15. Electrical hand tools and techniques: A compilation. [utilization of space technology for tools and adapters

    Science.gov (United States)

    1974-01-01

    Space technology utilization for developing tools, adapters, and fixtures and procedures for assembling, installing, and servicing electrical components and equipment are discussed. Some of the items considered are: (1) pivotal screwdriver, (2) termination locator tool for shielded cables, (3) solder application tools, (4) insulation and shield removing tool, and (5) torque wrench adapter for cable connector engaging ring. Diagrams of the various tools and devices are provided.

  16. PEAC: A Power-Efficient Adaptive Computing Technology for Enabling Swarm of Small Spacecraft and Deployable Mini-Payloads

    Data.gov (United States)

    National Aeronautics and Space Administration — This task is to develop and demonstrate a path-to-flight and power-adaptive avionics technology PEAC (Power Efficient Adaptive Computing). PEAC will enable emerging...

  17. Global assessment of technological innovation for climate change adaptation and mitigation in developing world.

    Science.gov (United States)

    Adenle, Ademola A; Azadi, Hossein; Arbiol, Joseph

    2015-09-15

    Concerns about mitigating and adapting to climate change resulted in renewing the incentive for agricultural research investments and developing further innovation priorities around the world particularly in developing countries. In the near future, development of new agricultural measures and proper diffusion of technologies will greatly influence the ability of farmers in adaptation and mitigation to climate change. Using bibliometric approaches through output of academic journal publications and patent-based data, we assess the impact of research and development (R&D) for new and existing technologies within the context of climate change mitigation and adaptation. We show that many developing countries invest limited resources for R&D in relevant technologies that have great potential for mitigation and adaption in agricultural production. We also discuss constraints including weak infrastructure, limited research capacity, lack of credit facilities and technology transfer that may hinder the application of innovation in tackling the challenges of climate change. A range of policy measures is also suggested to overcome identified constraints and to ensure that potentials of innovation for climate change mitigation and adaptation are realized. Copyright © 2015 Elsevier Ltd. All rights reserved.

  18. Integrated technology selection for energy conservation and PAHs control in iron and steel industry: Methodology and case study

    International Nuclear Information System (INIS)

    Li, Li; Lu, Yonglong; Shi, Yajuan; Wang, Tieyu; Luo, Wei; Gosens, Jorrit; Chen, Peng; Li, Haiqian

    2013-01-01

    Energy conservation and PAHs (polycyclic aromatic hydrocarbon) control are two challenges for the iron and steel industry, especially where the industry has developed at high speed. How to select appropriate technologies to improve energy efficiency and control pollution from PAHs simultaneously is encountered by both the researchers and the decision makers. This study sets up a framework on technology selection and combination which integrates technology assessment, multiple objective programming and scenario analysis. It can predict proper technology combination for different emission controls, energy conservation targets and desired levels of production. An iron and steel factory in Southwestern China is cited as a case. It is shown that stricter PAHs control will drive the transformation from process control technology to alternative smelting technology. In low PAHs limit, 25% energy reduction is a threshold. Before inclusion of a restraint on energy consumption at 25% reduction, PAHs emission is the key limiting factor for the technology selection; while after inclusion of this restraint, energy consumption becomes the key limiting factor. The desired level of production will also influence the technology selection. This study can help decision makers to select appropriate technologies to meet the PAHs control objectives and energy conservation strategies in energy-intensive industries. - Highlights: ► We predict technical strategy for energy and PAHs reduction in iron and steel mill. ► With low PAHs control objectives, process control technologies are preferable. ► With medium and high PAHs control goals, alternative smelting technology is dominate. ► In low PAHs control objective, 25% energy reduction is a threshold

  19. Evaluation of Adaptive Noise Management Technologies for School-Age Children with Hearing Loss.

    Science.gov (United States)

    Wolfe, Jace; Duke, Mila; Schafer, Erin; Jones, Christine; Rakita, Lori

    2017-05-01

    Children with hearing loss experience significant difficulty understanding speech in noisy and reverberant situations. Adaptive noise management technologies, such as fully adaptive directional microphones and digital noise reduction, have the potential to improve communication in noise for children with hearing aids. However, there are no published studies evaluating the potential benefits children receive from the use of adaptive noise management technologies in simulated real-world environments as well as in daily situations. The objective of this study was to compare speech recognition, speech intelligibility ratings (SIRs), and sound preferences of children using hearing aids equipped with and without adaptive noise management technologies. A single-group, repeated measures design was used to evaluate performance differences obtained in four simulated environments. In each simulated environment, participants were tested in a basic listening program with minimal noise management features, a manual program designed for that scene, and the hearing instruments' adaptive operating system that steered hearing instrument parameterization based on the characteristics of the environment. Twelve children with mild to moderately severe sensorineural hearing loss. Speech recognition and SIRs were evaluated in three hearing aid programs with and without noise management technologies across two different test sessions and various listening environments. Also, the participants' perceptual hearing performance in daily real-world listening situations with two of the hearing aid programs was evaluated during a four- to six-week field trial that took place between the two laboratory sessions. On average, the use of adaptive noise management technology improved sentence recognition in noise for speech presented in front of the participant but resulted in a decrement in performance for signals arriving from behind when the participant was facing forward. However, the improvement

  20. Post-adoption behaviour of farmers towards soil and water conservation technologies of watershed management in India

    Directory of Open Access Journals (Sweden)

    Gopal Lal Bagdi

    2015-09-01

    Full Text Available The Indian Institute of Soil and Water Conservation (IISWC and its Research Centres have developed many successful model watershed projects in India in the past and implemented many Soil and Water Conservation (SWC technologies for sustainable watershed management. While many evaluation studies were conducted on these projects in the past, there has been no assessment of the post-adoption status of the SWC technologies over a longer period. It was imperative to appraise the behaviour of the farmers with regard to the continuance or discontinuance of the technologies adopted, diffusion or infusion that took place and technological gaps that occurred in due course of time in the post watershed programme. Therefore, it was realized that the post-adoption behaviour of beneficiary farmers who have adopted different soil and water conservation technologies for watershed management projects should be studied in detail. The research study was initiated in 2012 as a core project at Vasad as the lead Centre along with IISWC headquarter Dehradun, and Centres Agra, Bellary, Chandigarh, Datia, Kota & Ooty, with the specific objectives of the study to measure the extent of post-adoption behaviour (continued-adoption, discontinuance, technological gap, diffusion and infusion of farmers towards the adopted SWC technologies of watershed management. In the present study various indices regarding continued adoption, dis-adoption (discontinuance, technological gap, diffusion, infusion regarding soil and water conservation technologies for watershed management were developed for measurement of post-adoption behaviour of farmers. It was revealed that a little less than three-fourth (73% of SWC technologies continued to be adopted and more than one-fourth (27% were discontinued by farmers. Out of the total continue adopted SWC technologies by farmers, a little less than one-fifth (19% of technologies continued to be adopted with a technological gap. More than one

  1. The assessment of soil conservation technologies for sustainable agricultural production. Report of the FAO/IAEA consultants meeting. Working material

    International Nuclear Information System (INIS)

    2001-01-01

    A Consultants' Meeting on 'The assessment of soil conservation technologies for sustainable agricultural production' was held in Vienna at the IAEA Headquarters from May 28-30, 2001. The consultants' presentations reviewed recent advances in the use of fallout radionuclides to measure soil erosion as well as approaches and technologies applied for soil conservation worldwide. Also, activities and experiences of FAO and UNEP in the field of land degradation, soil conservation and related issues were presented. Based on the information provided by the Scientific Secretary, a full project proposal was prepared during the second part of the Consultants' Meeting. The consultants also provided recommendations on the formulation and implementation of a future CRP on the subject

  2. Empowering Children with Adaptive Technology Skills: Careful Engagement in the Digital Information Age

    Directory of Open Access Journals (Sweden)

    Miftachul HUDA

    2017-03-01

    Full Text Available The technological advancement occurring in the world today has a potency to create positive and negative side effects especially on children. The positive side may entail increased empathy and acceptance of diversity through modelling the prosocial behaviours, while the negative can be manifest in aggressive behaviour, risky sexual behaviour, and substance abuse. These challenges pose a need to draw a particular attention to children’s rights of protection and care in relation to the use of technology. This paper sought to critically explore the way in which children adapt technology skills and the way they respond towards media influences. The findings revealed that the adaptive technology skills are needed in providing a considerable guidance for child protection and careful engagement towards digital information as part of their rights to natural growth and development.

  3. Empowering children with adaptive technology skills: Careful engagement in the digital ınformation age

    Directory of Open Access Journals (Sweden)

    Miftachul Huda

    2017-03-01

    Full Text Available The technological advancement occurring in the world today has a potency to create positive and negative side effects especially on children. The positive side may entail increased empathy and acceptance of diversity through modelling the prosocial behaviours, while the negative can be manifest in aggressive behaviour, risky sexual behaviour, and substance abuse. These challenges pose a need to draw a particular attention to children’s rights of protection and care in relation to the use of technology. This paper sought to critically explore the way in which children adapt technology skills and the way they respond towards media influences. The findings revealed that the adaptive technology skills are needed in providing a considerable guidance for child protection and careful engagement towards digital information as part of their rights to natural growth and development.

  4. Tailoring conservation agriculture technologies to West Africa semi-arid zones: Building on traditional local practices for soil restoration

    NARCIS (Netherlands)

    Lahmar, R.; Bationo, B.A.; Lamso, N.D.; Guéro, Y.; Tittonell, P.A.

    2012-01-01

    Low inherent fertility of tropical soils and degradation, nutrient deficiency and water stress are the key factors that hamper rainfed agriculture in semi-arid West Africa. Conservation Agriculture (CA) is currently promoted in the region as a technology to reduce soil degradation, mitigate the

  5. Collective movement in ecology: from emerging technologies to conservation and management.

    Science.gov (United States)

    Westley, Peter A H; Berdahl, Andrew M; Torney, Colin J; Biro, Dora

    2018-05-19

    Recent advances in technology and quantitative methods have led to the emergence of a new field of study that stands to link insights of researchers from two closely related, but often disconnected disciplines: movement ecology and collective animal behaviour. To date, the field of movement ecology has focused on elucidating the internal and external drivers of animal movement and the influence of movement on broader ecological processes. Typically, tracking and/or remote sensing technology is employed to study individual animals in natural conditions. By contrast, the field of collective behaviour has quantified the significant role social interactions play in the decision-making of animals within groups and, to date, has predominantly relied on controlled laboratory-based studies and theoretical models owing to the constraints of studying interacting animals in the field. This themed issue is intended to formalize the burgeoning field of collective movement ecology which integrates research from both movement ecology and collective behaviour. In this introductory paper, we set the stage for the issue by briefly examining the approaches and current status of research in these areas. Next, we outline the structure of the theme issue and describe the obstacles collective movement researchers face, from data acquisition in the field to analysis and problems of scale, and highlight the key contributions of the assembled papers. We finish by presenting research that links individual and broad-scale ecological and evolutionary processes to collective movement, and finally relate these concepts to emerging challenges for the management and conservation of animals on the move in a world that is increasingly impacted by human activity.This article is part of the theme issue 'Collective movement ecology'. © 2018 The Author(s).

  6. The trans-Alaska pipeline controversy: Technology, conservation, and the frontier

    International Nuclear Information System (INIS)

    Coates, P.A.

    1991-01-01

    The Trans-Alaska Pipeline was the object of perhaps the most passionately fought conservation battle in the U.S. Although numerous authors documented the pipeline construction during its construction, there is, surprisingly, no previous scholarly treatment of this event written by an historian. Coates is an environmental historian who views the most interesting aspect of the controversy to be open-quote its relationship to earlier engineering projects and technological innovations in Alaska and the debates that accompanied them.close quotes Thus, he describes how the conservationist and environmental ideas arose during numerous earlier major Alaskan projects and controversies, including the Alaska Highway (1938-41), Canol Pipeline (1943-45), exploration of Naval Petroleum Reserve Number Four (Pet 4, 1944-1953), DEWline (1953-57), oil development in the Kenai National Moose Range (1957-58), statehood (1958), the creation of the Arctic Wildlife Refuge (1960), Project Chariot (1958-63), and Rampart Dam (1959-67). The history starts with the acquisition of Alaska in 1867 and finishes about the time of the Valdez oil spill in 1989

  7. Role of the process designer in the evolution of a technology oriented toward energy conservation

    Energy Technology Data Exchange (ETDEWEB)

    Cassarino, S [CONSER, Rome; Riccardi, R

    1975-01-01

    The increase in energy costs has introduced new stringent boundaries to process engineering, involving the need for more and more advanced calculation techniques and a greater accountability on the part of the process designer for the purposes of a financially effective engineering work. The designing and optimization approaches tending to favor minimum investment decisions for the past are now subjected to a careful critical revision under the pressures of this new reality. The process designer can--through such revision process--bring a substantial contribution of his own to the development of a technology oriented toward energy conservation. In view of these considerations and on the basis of newly emerging trends, some examples are introduced to illustrate certain development opportunities in oil-refining and petrochemical industrial processes. Conventional designs covering a refining plant and an oil fractionating unit are compared in details in this review with alternative patterns to which new designing approaches are applied for the purposes of an optimized energy consumption.

  8. Interpreting chemistry and technology of lime binders and implementing it in the conservation field

    Directory of Open Access Journals (Sweden)

    Georgia Zacharopoulou

    2009-01-01

    Full Text Available The objective of the paper is the compilation, review and dissemination of updated scientific knowledge on lime theory and technology in the field of heritage conservation. The strong evidence of the last decade's research on the positive effect of the - not demonstrable by a chemical equation – 'key' missing link of the maturation process is highlighted. It is demonstrated that the exceptional perfor -mance characteristics of durable lime based mortars predominately rely on the capacity for rapid, efficient and extensive carbonation of the air-hardening phase of limes, in particular when matured (nanoparticle wet slaked lime putties are used; and on the chemical and mechanical stability of the strength components (principally CSHs of the hydraulic phase of limes, which is higher in their more crystalline forms of historical lime-pozzolan mixtures than in their amorphous forms of modern cements. Hence, physicochemical adhesion and cohesion bonds both at the lime matrix and at the binder/aggregate interfaces are ensured imparting minimization of cracks and durability to lime based mortars and historic masonries. The comprehensive documentation of the former leads to optimal materials and procedures to preserve our cultural heritage.

  9. Understanding Institutional Adaptation to Climate Change: Social Resilience and Adaptive Governance Capacities of the Nature Based Tourism Institutions in the Annapurna Conservation Area, Nepal

    OpenAIRE

    Lama, Anu Kumari

    2016-01-01

    The global-local sustainable development and climate change adaptation policy, and the emerging political discourse on the value of local Adaptation, have positioned the local institutions and their governance space within the strategic enclaves of multilevel governance system. Such shifts have transformed the context for sustainable Nature Based Tourism (NBT) development and adaptation in Nepal in general, and its protected areas, in particular. The emerging institutional adaptation discours...

  10. Adaptation

    International Development Research Centre (IDRC) Digital Library (Canada)

    building skills, knowledge or networks on adaptation, ... the African partners leading the AfricaAdapt network, together with the UK-based Institute of Development Studies; and ... UNCCD Secretariat, Regional Coordination Unit for Africa, Tunis, Tunisia .... 26 Rural–urban Cooperation on Water Management in the Context of.

  11. An adaptive, implicit, conservative, 1D-2V multi-species Vlasov-Fokker-Planck multi-scale solver in planar geometry

    Science.gov (United States)

    Taitano, W. T.; Chacón, L.; Simakov, A. N.

    2018-07-01

    We consider a 1D-2V Vlasov-Fokker-Planck multi-species ionic description coupled to fluid electrons. We address temporal stiffness with implicit time stepping, suitably preconditioned. To address temperature disparity in time and space, we extend the conservative adaptive velocity-space discretization scheme proposed in [Taitano et al., J. Comput. Phys., 318, 391-420, (2016)] to a spatially inhomogeneous system. In this approach, we normalize the velocity-space coordinate to a temporally and spatially varying local characteristic speed per species. We explicitly consider the resulting inertial terms in the Vlasov equation, and derive a discrete formulation that conserves mass, momentum, and energy up to a prescribed nonlinear tolerance upon convergence. Our conservation strategy employs nonlinear constraints to enforce these properties discretely for both the Vlasov operator and the Fokker-Planck collision operator. Numerical examples of varying degrees of complexity, including shock-wave propagation, demonstrate the favorable efficiency and accuracy properties of the scheme.

  12. Technology-mediated therapy for chronic pain management: the challenges of adapting behavior change interventions for delivery with pervasive communication technology.

    Science.gov (United States)

    Rosser, Benjamin A; McCullagh, Paul; Davies, Richard; Mountain, Gail A; McCracken, Lance; Eccleston, Christopher

    2011-04-01

    Adapting therapeutic practice from traditional face-to-face exchange to remote technology-based delivery presents challenges for the therapist, patient, and technical writer. This article documents the process of therapy adaptation and the resultant specification for the SMART2 project-a technology-based self-management system for assisting long-term health conditions, including chronic pain. Focus group discussions with healthcare professionals and patients were conducted to inform selection of therapeutic objectives and appropriate technology. Pertinent challenges are identified, relating to (1) reduction and definition of therapeutic objectives, and (2) how to approach adaptation of therapy to a form suited to technology delivery. The requirement of the system to provide dynamic and intelligent responses to patient experience and behavior is also emphasized. Solutions to these challenges are described in the context of the SMART2 technology-based intervention. More explicit discussion and documentation of therapy adaptation to technology-based delivery within the literature is encouraged.

  13. Energy conservation and end-use technologies for the 21. Century

    International Nuclear Information System (INIS)

    Maass, G.; Wagner, H.F.

    1994-01-01

    This paper deals with technology options which are: deployed, demonstrated, prospective and conceivable technology. Then, it explains where these options are most important: electricity production and distribution, transport technologies and fuels, residential and commercial buildings, industry. (TEC)

  14. A fully consistent and conservative vertically adaptive coordinate system for SLIM 3D v0.4 with an application to the thermocline oscillations of Lake Tanganyika

    Science.gov (United States)

    Delandmeter, Philippe; Lambrechts, Jonathan; Legat, Vincent; Vallaeys, Valentin; Naithani, Jaya; Thiery, Wim; Remacle, Jean-François; Deleersnijder, Eric

    2018-03-01

    The discontinuous Galerkin (DG) finite element method is well suited for the modelling, with a relatively small number of elements, of three-dimensional flows exhibiting strong velocity or density gradients. Its performance can be highly enhanced by having recourse to r-adaptivity. Here, a vertical adaptive mesh method is developed for DG finite elements. This method, originally designed for finite difference schemes, is based on the vertical diffusion of the mesh nodes, with the diffusivity controlled by the density jumps at the mesh element interfaces. The mesh vertical movement is determined by means of a conservative arbitrary Lagrangian-Eulerian (ALE) formulation. Though conservativity is naturally achieved, tracer consistency is obtained by a suitable construction of the mesh vertical velocity field, which is defined in such a way that it is fully compatible with the tracer and continuity equations at a discrete level. The vertically adaptive mesh approach is implemented in the three-dimensional version of the geophysical and environmental flow Second-generation Louvain-la-Neuve Ice-ocean Model (SLIM 3D; www.climate.be/slim). Idealised benchmarks, aimed at simulating the oscillations of a sharp thermocline, are dealt with. Then, the relevance of the vertical adaptivity technique is assessed by simulating thermocline oscillations of Lake Tanganyika. The results are compared to measured vertical profiles of temperature, showing similar stratification and outcropping events.

  15. PEDAGOGICAL TECHNOLOGY AIMED AT STUDENTS’ ADAPTATION TO DISCIPLINE-BASED EDUCATION IN SECONDARY SCHOOLS

    Directory of Open Access Journals (Sweden)

    Ekaterina M. Cheprakova

    2015-01-01

    Full Text Available The aim of the study is to describe the educational technology aimed at students adaptation to discipline-based education in basic school; results discussion of the application practice to the educational process of the 5th grade.Methods. The methods involve learning experience, school documentation analysis, pedagogical experiment, study of students’ creativity and pedagogical experience on its organizational work. Systematic approach is used while structuring of the 5th grade students’ representations on the disciplines’ content of primary and basic general education on the methodological levelResults. The pedagogical technology of breaking the students’ educational disadaptation in the basic school is presented. The program of the course «All the subjects are good» is worked out. This program may allow students to adapt to the discipline content of the general education, to understand the essence of curriculum disciplines content and links between them, and the motivation development towards disciplinebased education evidence students’ adaptation. These objectives can be achieved through generation of skills based on the algorithmic of the concepts’ definitions mastering. The pilot implementation of the proposed technology in secondary school № 65 and in the Center «Giftedness and technology» of Yekaterinburg is presented.Scientific novelty. The effective way of neutralization and elimination of students’ discipline-educational disadaptation based on purposeful development of their conceptual thinking is proposed.Practical significance. The technology developed by authors allows teachers to form and develop the universal educational actions representing itself as a result of school training in the requirements of the educational standard. Timely use of this technology at transition age of children from primary school to secondary one provides the further success of their education.

  16. Adapt

    Science.gov (United States)

    Bargatze, L. F.

    2015-12-01

    Active Data Archive Product Tracking (ADAPT) is a collection of software routines that permits one to generate XML metadata files to describe and register data products in support of the NASA Heliophysics Virtual Observatory VxO effort. ADAPT is also a philosophy. The ADAPT concept is to use any and all available metadata associated with scientific data to produce XML metadata descriptions in a consistent, uniform, and organized fashion to provide blanket access to the full complement of data stored on a targeted data server. In this poster, we present an application of ADAPT to describe all of the data products that are stored by using the Common Data File (CDF) format served out by the CDAWEB and SPDF data servers hosted at the NASA Goddard Space Flight Center. These data servers are the primary repositories for NASA Heliophysics data. For this purpose, the ADAPT routines have been used to generate data resource descriptions by using an XML schema named Space Physics Archive, Search, and Extract (SPASE). SPASE is the designated standard for documenting Heliophysics data products, as adopted by the Heliophysics Data and Model Consortium. The set of SPASE XML resource descriptions produced by ADAPT includes high-level descriptions of numerical data products, display data products, or catalogs and also includes low-level "Granule" descriptions. A SPASE Granule is effectively a universal access metadata resource; a Granule associates an individual data file (e.g. a CDF file) with a "parent" high-level data resource description, assigns a resource identifier to the file, and lists the corresponding assess URL(s). The CDAWEB and SPDF file systems were queried to provide the input required by the ADAPT software to create an initial set of SPASE metadata resource descriptions. Then, the CDAWEB and SPDF data repositories were queried subsequently on a nightly basis and the CDF file lists were checked for any changes such as the occurrence of new, modified, or deleted

  17. Survey of subsurface geophysical exploration technologies adaptable to an airborne platform

    International Nuclear Information System (INIS)

    Taylor, K.A.

    1992-12-01

    This report has been prepared by the US Department of Energy (DOE) as part of a Research Development Demonstration Testing and Evaluation (RDDT ampersand E) project by EG ampersand G Energy Measurement's (EG ampersand G/EM) Remote Sensing Laboratory. It examines geophysical detection techniques which may be used in Environmental Restoration/Waste Management (ER/WM) surveys to locate buried waste, waste containers, potential waste migratory paths, and aquifer depths. Because of the Remote Sensing Laboratory's unique survey capabilities, only those technologies which have been adapted or are capable of being adapted to an airborne platform were studied. This survey describes several of the available subsurface survey technologies and discusses the basic capabilities of each: the target detectability, required geologic conditions, and associated survey methods. Because the airborne capabilities of these survey techniques have not been fully developed, the chapters deal mostly with the ground-based capabilities of each of the technologies, with reference made to the airborne capabilities where applicable. The information about each survey technique came from various contractors whose companies employ these specific technologies. EG ampersand G/EM cannot guarantee or verify the accuracy of the contractor information; however, the data given is an indication of the technologies that are available

  18. Framework for Instructional Technology: Methods of Implementing Adaptive Training and Education

    Science.gov (United States)

    2014-01-01

    whether instructional environment actually has the time and resources to implement an adaptive strategy. For this reason, in this paper we...referred to as fading. Just as a person healing from a broken leg may go from crutches to a cane to no assistance, ultimately, the learner should be...Chicago. Retrieved from http://www.fossati.us/ papers /ilist-phdthesis.pdf Graesser, A. C., Jeon, M. & Dufty, D. (2008). Agent technologies designed

  19. Marginal adaptation and CAD-CAM technology: A systematic review of restorative material and fabrication techniques.

    Science.gov (United States)

    Papadiochou, Sofia; Pissiotis, Argirios L

    2018-04-01

    The comparative assessment of computer-aided design and computer-aided manufacturing (CAD-CAM) technology and other fabrication techniques pertaining to marginal adaptation should be documented. Limited evidence exists on the effect of restorative material on the performance of a CAD-CAM system relative to marginal adaptation. The purpose of this systematic review was to investigate whether the marginal adaptation of CAD-CAM single crowns, fixed dental prostheses, and implant-retained fixed dental prostheses or their infrastructures differs from that obtained by other fabrication techniques using a similar restorative material and whether it depends on the type of restorative material. An electronic search of English-language literature published between January 1, 2000, and June 30, 2016, was conducted of the Medline/PubMed database. Of the 55 included comparative studies, 28 compared CAD-CAM technology with conventional fabrication techniques, 12 contrasted CAD-CAM technology and copy milling, 4 compared CAD-CAM milling with direct metal laser sintering (DMLS), and 22 investigated the performance of a CAD-CAM system regarding marginal adaptation in restorations/infrastructures produced with different restorative materials. Most of the CAD-CAM restorations/infrastructures were within the clinically acceptable marginal discrepancy (MD) range. The performance of a CAD-CAM system relative to marginal adaptation is influenced by the restorative material. Compared with CAD-CAM, most of the heat-pressed lithium disilicate crowns displayed equal or smaller MD values. Slip-casting crowns exhibited similar or better marginal accuracy than those fabricated with CAD-CAM. Cobalt-chromium and titanium implant infrastructures produced using a CAD-CAM system elicited smaller MD values than zirconia. The majority of cobalt-chromium restorations/infrastructures produced by DMLS displayed better marginal accuracy than those fabricated with the casting technique. Compared with copy

  20. Adapting a Technology-Based Implementation Support Tool for Community Mental Health: Challenges and Lessons Learned.

    Science.gov (United States)

    Livet, Melanie; Fixsen, Amanda

    2018-01-01

    With mental health services shifting to community-based settings, community mental health (CMH) organizations are under increasing pressure to deliver effective services. Despite availability of evidence-based interventions, there is a gap between effective mental health practices and the care that is routinely delivered. Bridging this gap requires availability of easily tailorable implementation support tools to assist providers in implementing evidence-based intervention with quality, thereby increasing the likelihood of achieving the desired client outcomes. This study documents the process and lessons learned from exploring the feasibility of adapting such a technology-based tool, Centervention, as the example innovation, for use in CMH settings. Mixed-methods data on core features, innovation-provider fit, and organizational capacity were collected from 44 CMH providers. Lessons learned included the need to augment delivery through technology with more personal interactions, the importance of customizing and integrating the tool with existing technologies, and the need to incorporate a number of strategies to assist with adoption and use of Centervention-like tools in CMH contexts. This study adds to the current body of literature on the adaptation process for technology-based tools and provides information that can guide additional innovations for CMH settings.

  1. Assistive technology for promoting adaptive skills of children with cerebral palsy: ten cases evaluation.

    Science.gov (United States)

    Stasolla, Fabrizio; Caffò, Alessandro O; Perilli, Viviana; Boccasini, Adele; Damiani, Rita; D'Amico, Fiora

    2018-05-06

    To extend the use of assistive technology for promoting adaptive skills of children with cerebral palsy. To assess its effects on positive participation of ten participants involved. To carry out a social validation recruiting parents, physiotherapists and support teachers as external raters. A multiple probe design was implemented for Studies I and II. Study I involved five participants exposed to a combined program aimed at enhancing choice process of preferred items and locomotion fluency. Study II involved five further children for a combined intervention finalized at ensuring them with literacy access and ambulation responses. Study III recruited 60 external raters for a social validation assessment. All participants improved their performance, although differences among children occurred. Indices of positive participation increased as well. Social raters favorably scored the use of both technology and programs. Assistive technology-based programs were effective for promoting independence of children with cerebral palsy. Implications for Rehabilitation A basic form of assistive technology such as a microswitch-based program may be useful and helpful for supporting adaptive skills of children with cerebral palsy and different levels of functioning. The same program may improve the participants' indices of positive participation and constructive engagement with beneficial effects on their quality of life. The positive social rating provided by external experts sensitive to the matter may recommend a favorable acceptance and implementation of the program in daily settings.

  2. Development of Adaptive Acoustic Impedance Control Technologies of Acoustic Duct Liner

    Directory of Open Access Journals (Sweden)

    Hiroshi Kobayashi

    2011-01-01

    Full Text Available This paper describes the development of adaptive acoustic impedance control (AAC technologies to achieve a larger fan noise reduction, by adaptively adjusting reactance and resistance of the acoustic liner impedance. For the actual proof of the AAC technology III performance, the advanced fan noise absorption control duct liner II was made on trial basis, with the simple control system and the plain device. And, then, the duct liner II was examined for the AAC technology I, II, and III models, using the high speed fan test facility. The test results made clear that the duct liner II of the AAC technology III model could achieve the fan noise reduction higher than O.A. SPL 10 dB (A at the maximum fan speed 6000 rpm, containing the reduction of fundamental BPF tone of 18 dB and 2nd BPF tone of 10 dB in response to the fan peed change from 3000 to 6000 rpm.

  3. Climate change, insurance, and the buildings sector: Technological synergisms between adaptation and mitigation

    Energy Technology Data Exchange (ETDEWEB)

    Mills, Evan

    2002-11-01

    Examining the intersection of risk analysis and sustainable energy strategies reveals numerous examples of energy efficient and renewable energy technologies that offer insurance loss-prevention benefits. The growing threat of climate change provides an added motivation for the risk community to better understand this area of opportunity. While analyses of climate change mitigation typically focus on the emissions-reduction characteristics of sustainable energy technologies, less often recognized are a host of synergistic ways in which these technologies also offer adaptation benefits, e.g. making buildings more resilient to natural disasters. While there is already some relevant activity, there remain various barriers to significantly expanding these efforts. Achieving successful integration of sustainable energy considerations with risk-management objectives requires a more proactive orientation, and coordination among diverse actors and industry groups.

  4. Climate change, insurance and the building sector: technological synergisms between adaptation and mitigation

    International Nuclear Information System (INIS)

    Mills, E.

    2003-01-01

    Examining the intersection of risk analysis and sustainable energy strategies reveals numerous examples of energy-efficient and renewable energy technologies that offer insurance loss-prevention benefits. The growing threat of climate change provides an added motivation for the risk community to understand better this area of opportunity. While analyses of climate change mitigation typically focus on the emissions-reduction characteristics of sustainable energy technologies, less often recognised are a host of synergistic ways in which these technologies also offer adaptation benefits, e.g. making buildings more resilient to natural disasters. While there is already some relevant activity, there remain various barriers to expanding these efforts significantly. Achieving successful integration of sustainable energy considerations with risk-management objectives requires a more proactive orientation, and coordination among diverse actors and industry groups. (author)

  5. Transfer of adapted water supply technologies through a demonstration and teaching facility

    Science.gov (United States)

    Nestmann, F.; Oberle, P.; Ikhwan, M.; Stoffel, D.; Blaß, H. J.; Töws, D.; Schmidt, S.

    2016-09-01

    Water scarcity can be defined as a lack of sufficient water resources or as the limited or even missing access to a safe water supply. Latter can be classified as `economic water scarcity' which among others can commonly be met in tropical and subtropical karst regions of emerging and developing countries. Karst aquifers, mostly consisting of limestone and carbonate rock, show high infiltration rates which leads to a lack of above ground storage possibilities. Thus, the water will drain rapidly into the underground and evolve vast river networks. Considering the lack of appropriate infrastructure and limited human capacities in the affected areas, these underground water resources cannot be exploited adequately. Against this, background innovative and adapted technologies are required to utilize hard-to-access water resources in a sustainable way. In this context, the German-Indonesian joint R&D project "Integrated Water Resources Management (IWRM) Indonesia" dealt with the development of highly adaptable water technologies and management strategies. Under the aegis of the Karlsruhe Institute of Technology (KIT) and funded by the German Ministry of Education and Research (BMBF), these innovative technical concepts were exemplarily implemented to remedy this deficiency in the model region Gunung Sewu, a karst area situated on the southern coast of Java Island, Indonesia. The experiences gained through the interdisciplinary joint R&D activities clearly showed that even in the case of availability of appropriate technologies, a comprising transfer of knowhow and the buildup of capabilities (Capacity Development) is inevitable to sustainably implement and disseminate new methods. In this context, an adapted water supply facility was developed by KIT which hereafter shall serve for demonstration, teaching, and research purposes. The plant's functionality, its teaching and research concept, as well as the design process, which was accomplished in collaboration with the

  6. Health Information Technology (HIT) Adaptation: Refocusing on the Journey to Successful HIT Implementation.

    Science.gov (United States)

    Yen, Po-Yin; McAlearney, Ann Scheck; Sieck, Cynthia J; Hefner, Jennifer L; Huerta, Timothy R

    2017-09-07

    In past years, policies and regulations required hospitals to implement advanced capabilities of certified electronic health records (EHRs) in order to receive financial incentives. This has led to accelerated implementation of health information technologies (HIT) in health care settings. However, measures commonly used to evaluate the success of HIT implementation, such as HIT adoption, technology acceptance, and clinical quality, fail to account for complex sociotechnical variability across contexts and the different trajectories within organizations because of different implementation plans and timelines. We propose a new focus, HIT adaptation, to illuminate factors that facilitate or hinder the connection between use of the EHR and improved quality of care as well as to explore the trajectory of changes in the HIT implementation journey as it is impacted by frequent system upgrades and optimizations. Future research should develop instruments to evaluate the progress of HIT adaptation in both its longitudinal design and its focus on adaptation progress rather than on one cross-sectional outcome, allowing for more generalizability and knowledge transfer. ©Po-Yin Yen, Ann Scheck McAlearney, Cynthia J Sieck, Jennifer L Hefner, Timothy R Huerta. Originally published in JMIR Medical Informatics (http://medinform.jmir.org), 07.09.2017.

  7. Low Energy Technology. A Unit of Instruction on Energy Conservation in Field Crop Production.

    Science.gov (United States)

    Davis, George; Scanlon, Dennis C.

    This unit of instruction on energy conservation in field crop production was designed for use by agribusiness and natural resources teachers in Florida high schools and by agricultural extension agents as they work with adults and students. It is one of a series of 11 instructional units (see note) written to help teachers and agents to educate…

  8. Financial viability of soil and water conservation technologies in northwestern Ethiopian highlands

    NARCIS (Netherlands)

    Teshome, Akalu; Rolker, D.; Graaff, de J.

    2013-01-01

    Soil erosion by water is a major threat to food security, environmental sustainability and prospects for rural development in Ethiopia. Successive governments have promoted various soil and water conservation (SWC) measures in order to reduce the effects of land degradation, but adoption rates vary

  9. Information and communication technology and climate change adaptation: Evidence from selected mining companies in South Africa

    Directory of Open Access Journals (Sweden)

    Bartholomew I. Aleke

    2016-04-01

    Full Text Available The mining sector is a significant contributor to the gross domestic product of many global economies. Given the increasing trends in climate-induced disasters and the growing desire to find lasting solutions, information and communication technology (ICT has been introduced into the climate change adaptation mix. Climate change-induced extreme weather events such as flooding, drought, excessive fog, and cyclones have compounded the environmental challenges faced by the mining sector. This article presents the adoption of ICT innovation as part of the adaptation strategies towards reducing the mining sector’s vulnerability and exposure to climate change disaster risks. Document analysis and systematic literature review were adopted as the methodology. Findings from the study reflect how ICT intervention orchestrated changes in communication patterns which are tailored towards the reduction in climate change vulnerability and exposure. The research concludes with a proposition that ICT intervention must be part of the bigger and ongoing climate change adaptation agenda in the mining sector. Keywords: ICT; climate change; disaster risk reduction; mining; adaptation; South Africa

  10. A Dynamic Information Framework: A Multi-Sector, Geospatial Gateway for Environmental Conservation and Adaptation to Climate Change

    Science.gov (United States)

    Fernandes, E. C.; Norbu, C.; Juizo, D.; Wangdi, T.; Richey, J. E.

    2011-12-01

    Landscapes, watersheds, and their downstream coastal and lacustrine zones are facing a series of challenges critical to their future, centered on the availability and distribution of water. Management options cover a range of issues, from bringing safe water to local villages for the rural poor, developing adaptation strategies for both rural and urban populations and large infrastructure, and sustaining environmental flows and ecosystem services needed for natural and human-dominated ecosystems. These targets represent a very complex set of intersecting issues of scale, cross-sector science and technology, education, politics, and economics, and the desired sustainable development is closely linked to how the nominally responsible governmental Ministries respond to the information they have. In practice, such information and even perspectives are virtually absent, in much of the developing world. A Dynamic Information Framework (DIF) is being designed as a knowledge platform whereby decision-makers in information-sparse regions can consider rigorous scenarios of alternative futures and obtain decision support for complex environmental and economic decisions is essential. The DIF is geospatial gateway, with functional components of base data layers, directed data layers focused on synthetic objectives, geospatially-explicit, process-based, cross-sector simulation models (requiring data from the directed data layers), and facilitated input/output (including visualizations), and decision support system and scenario testing capabilities. A fundamental aspect to a DIF is not only the convergence of multi-sector information, but how that information can be (a) integrated (b) used for robust simulations and projections, and (c) conveyed to policymakers and stakeholders, in the most compelling, and visual, manner. Examples are given of emerging applications. The ZambeziDIF was used to establish baselines for agriculture, biodiversity, and water resources in the lower

  11. Federal regulation of the pipeline industry: a summary review. [Effects on use of energy-conservation technology

    Energy Technology Data Exchange (ETDEWEB)

    Banks, W. F.

    1977-05-31

    The principal purposes of this report are: (1) identification of the jurisdiction areas of the Federal pipeline-regulating agencies, and (2) examination of the amenability of the regulatory system to the introduction of energy-conservative new technology into the pipeline industry. The history, scope, and agency structure of state and Federal regulation are recounted and some gaps, overlaps, and ambiguities are identified. The only significant inhibitory effects upon technological innovation are found to derive from the FPC and ICC limits upon profit, the 1941 Justice Department consent decree limiting dividends to shipper-owned pipelines, and the income tax rules governing recovery of investment credits and startup losses. Effects of these limits are explored by simulation studies using the Systems, Science and Software pipeline economic model (PEM). Two new concepts of regulation are proposed which would neutralize the inhibitory effect of the present regulatory system and would motivate pipeline operators to conserve energy: (1) use of a ''national equivalent value'' in the economic tradeoff analyses which justify entry of a technological innovation into the rate base (valuation), and (2) a ''valuation allowance'' which would reverse the presently often-existing situation and insure that the pipeline operator would realize a greater profit from saving energy than from wasting it.

  12. Characterization and handling solutions through development and adaptation of available technologies

    International Nuclear Information System (INIS)

    Michel, W.S.; Frazee, C.

    1998-01-01

    The Department of Energy (DOE) faces unique challenges in characterizing and handling its mixed wastes. Mixed waste is low-level or transuranic (TRU) contaminated wastes containing Resource Conservation and Recovery Act (RCRA) hazardous materials. Characterization and material handling technologies will be required to solve pretreatment and disposal needs, and to meet transportation requirements. The Mixed Waste Focus Area (MWFA) will fund the development and demonstration of characterization and material handling technologies to ensure the availability to support the DOE mixed waste needs. The MWFA will be evaluating commercially available and laboratory developed technologies for applicability in meeting these needs. Improved systems will be developed, on the commercial or laboratory side, as needed to address unmet needs. Studies/demonstrations are taking place this year to evaluate the capabilities of existing systems and identify technology gaps. Calls for proposals will be made to both industry and laboratory to identify work to address those gaps. Prioritization of applicable proposals will take place and activities funded appropriately to address characterization and material handling needs

  13. Spacing conservation practice: Place-making, social learning, and adaptive governance in natural resource management [Chapter 15

    Science.gov (United States)

    Daniel R. Williams

    2018-01-01

    Nature conservation constitutes an important realm of professional practice with strong connections to the discourses on nature and sustainability. In recent decades much of that discourse has taken an explicitly spatial turn, observable across numerous domains of ecological, social, and political thought (Williams et al., 2013; Wu, 2006). The aim of this chapter is to...

  14. Climate-smart technologies. Integrating renewable energy and energy efficiency in mitigation and adaptation responses

    Energy Technology Data Exchange (ETDEWEB)

    Leal Filho, Walter; Mannke, Franziska; Schulte, Veronika [Hamburg Univ. of Applied Sciences (Germany). Faculty of Life Sciences; Mohee, Romeela; Surroop, Dinesh (eds.) [Mauritius Univ., Reduit (Mauritius). Chemical and Environmental Engineering Dept.

    2013-11-01

    Explores the links between climate change and technologies. Relates to the links between renewable energy and climate change. Documents and promotes a collection of experiences from island nations. Has a strong international focus and value to developing countries. The book addresses the perceived need for a publication with looks at both, climate smart technologies and the integration of renewable energy and energy efficiency in mitigation and adaptation responses. Based on a set of papers submitted as part of the fifth on-line climate conference (CLIMATE 2012) and a major conference on renewable energy on island States held in Mauritius in 2012, the book provides a wealth of information on climate change strategies and the role of smart technologies. The book has been produced in the context of the project ''Small Developing Island Renewable Energy Knowledge and Technology Transfer Network'' (DIREKT), funded by the ACP Science and Technology Programme, an EU programme for cooperation between the European Union and the ACP region.

  15. Conservation and Ecotourism in Brazil and Mexico: The Development Impact

    OpenAIRE

    David Ivan Fleischer

    2009-01-01

    Conservation projects alter local productive modes and have an impact on livelihoods. For example, sea turtle conservation projects affect fishing communities through hunting restrictions. It is not painless for communities to improve fishing technology in order to prevent the accidental capture of sea turtles. The inability to adapt to environmental requirements forces fishermen to abandon traditional livelihoods. A combination of environmental conservation and ecotourism development can pro...

  16. Adaptive Technology Application for Vibration-Based Diagnostics of Roller Bearings on Industrial Plants

    Directory of Open Access Journals (Sweden)

    Mironov Aleksey

    2014-09-01

    Full Text Available Roller bearings are widely used in equipment of different applications; therefore, the issues related to the assessment of bearing technical state and localization of bearing faults are quite important and relevant. The reason is that technical state of a bearing is a critical component, which determines efficiency of a mechanism or equipment. For bearings inspection and diagnostics, various methods of vibration-based diagnostics are used. The adaptive technology for vibration-based diagnostics developed in „D un D centrs” is an effective tool for evaluation of technical state of bearings in operation compared to the existing SKF method.

  17. SPADOCK: Adaptive Pipeline Technology for Web System using WebSocket

    Directory of Open Access Journals (Sweden)

    Aries RICHI

    2013-01-01

    Full Text Available As information technology grows to the era of IoT(Internet of Things and cloud computing, the performance ofweb application and web service which acts as the informationgateway becomes an issue. Horizontal quality of serviceimprovement through system performance escalation becomesan issue pursued by engineers and scientists, giving birth toBigPipe pipeline technology which was developed by Facebook.We make SPADOCK, an adaptive pipeline system which is builtunder distributed system architecture with the utilization ofHTML5 WebSocket, then measure its performance. Parametersused for the measurement includes latency, workload, andbandwidth. The result shows that SPADOCK could reduceserving latency by 68.28% compared with the conventional web,and it is 20.63% faster than BigPipe.

  18. Adapting cognitive radio technology for low-power wireless personal area network devices

    DEFF Research Database (Denmark)

    Toftegaard, Thomas Skjødeberg; Rohde, John

    2011-01-01

    The application of wireless personal area network (WPAN) and simple point-to-point wireless communication devices has increased drastically both in private household and in our workspaces in general over the last decade. Combined with the fact that the total number of wireless devices...... and associated standards present in the wireless environment is experiencing an extreme growth, the frequency spectrum scarcity is exposed as a severe challenge. Setting up efficient and reliable wireless WPAN links can be challenging even today. This is especially true because of the intensive use...... discusses the challenges associated with the implementation of highly reliable low-power WPAN networks for the future and the adaption of Cognitive Radio technology as a potential solution. A brief status on the maturity of CR technology will be presented as an integral part of this discussion....

  19. Using Soil Conservation Strategies in the Development of Learning Activities for the Students of Roi - Et College of Agriculture and Technology

    Directory of Open Access Journals (Sweden)

    Jariya Kanchanwong

    2017-06-01

    Full Text Available The purposes of this research were 1 to study nutrient content in soil samples taken from Roi - Et College of Agriculture and Technology Campus, 2 to study the social factors, economic factors and technological factors the effect on soil conservation of Roi - Et College of Agriculture and Technology students, 3 the development of soil conservation activities Learning package efficiency of 80/80, 4 to Study and to compare the knowledge, attitudes and skills regarding soil conservation of students of Roi - Et College of Agriculture and Technology. The student activities package of learning soil conservation was enrolled by 40 people in its club. These people were selected by purposive sampling. The instruments were used in this research as follows; 1 scientific analysis, 2 social questionnaire on economic and technological factors affecting soil conservation, 3 test of knowledge about soil conservation, 4 test of attitudes about soil conservation, 5 test of skill about soil conservation. The experimental research was designed to use students as key informants. The statistics analysis was used in the research as follows: frequency, percentage, average, standard deviation, test results, assumptions which included a dependent t-test statistical at the significance level of 0.05. The results of the study were as follows: 1 The study found that the amount of soil nutrient content (N: P: K around cultivated plants in an area of converted agriculture land have the significance: Soil checks collected in plots from soil containing morning glory, chrysanthemums, marigolds, corn and cassava, and had neutral pH. 2 The results of the analysis determing the factors that affected the conservation of soil found economic factors were at a high level Social factors and technology factors were moderate thus leading the approach that has come to create of learning activities package in soil conservation. 3 The results showed that the efficiency of the manual was 83

  20. Heat adaptation of bioabsorbable craniofacial plates: a critical review of science and technology.

    Science.gov (United States)

    Pietrzak, William S

    2009-11-01

    Bioabsorbable fixation plates often require adaptation to the bone. This is typically accomplished by heating the plates to above the glass transition temperature and placing the softened plates against the bone or a prebent template until cool. Upon cooling, the plates regain stiffness and can be attached to bone to obtain anatomic fixation. This procedure is both efficient and effective and has been used throughout the craniofacial skeleton. There are many types of equipment available to heat the plates, each with advantages and disadvantages. Although a conceptually simple process, there are several nuances that have been reported in the literature, including transient effects on plate mechanical properties, memory effects, differences between wet and dry heating, and others. Upon the backdrop of the overwhelming clinical success of heat adaptation, this review critically evaluates the method and provides a comprehensive examination and explanation of the basic science and technology involved. This should help give surgeons a better understanding of the process that can help improve their use and further advance the technology.

  1. Design of a virtual reality based adaptive response technology for children with autism.

    Science.gov (United States)

    Lahiri, Uttama; Bekele, Esubalew; Dohrmann, Elizabeth; Warren, Zachary; Sarkar, Nilanjan

    2013-01-01

    Children with autism spectrum disorder (ASD) demonstrate potent impairments in social communication skills including atypical viewing patterns during social interactions. Recently, several assistive technologies, particularly virtual reality (VR), have been investigated to address specific social deficits in this population. Some studies have coupled eye-gaze monitoring mechanisms to design intervention strategies. However, presently available systems are designed to primarily chain learning via aspects of one's performance only which affords restricted range of individualization. The presented work seeks to bridge this gap by developing a novel VR-based interactive system with Gaze-sensitive adaptive response technology that can seamlessly integrate VR-based tasks with eye-tracking techniques to intelligently facilitate engagement in tasks relevant to advancing social communication skills. Specifically, such a system is capable of objectively identifying and quantifying one's engagement level by measuring real-time viewing patterns, subtle changes in eye physiological responses, as well as performance metrics in order to adaptively respond in an individualized manner to foster improved social communication skills among the participants. The developed system was tested through a usability study with eight adolescents with ASD. The results indicate the potential of the system to promote improved social task performance along with socially-appropriate mechanisms during VR-based social conversation tasks.

  2. US/Japan workshop on mitigation and adaptation technologies related to global climate change

    Energy Technology Data Exchange (ETDEWEB)

    Bernthal, F.M.

    1993-12-31

    It is a great pleasure for me to have the honor of delivering the keynote address for this important gathering, an honor enhanced further because of the many activities and historic relationships represented by this workshop. First of all, it represents the spirit of continuing cooperation and good relations between the United States and Japan. With the aid of the framework provided by the U.S./Japan Science and Technology Agreement, our two nations can come together to address a problem that has no national boundaries {hor_ellipsis} and we can think about solutions of potential benefit to all citizens of the global community. This workshop also symbolizes the spirit of cooperation so characteristic of the conduct of research in science and technology -- cooperation between us as individual scientists and engineers, between the various institutions we represent, and across our diverse disciplines. This workshop is only the second of its kind. The first US/Japan Workshop on global climate change was held last year in Japan. That workshop focused on cooperative scientific research in the United States and Japan. Out of it came a general agreement to continue collaborative work and to extend cooperation into the area of global change-related technologies, in particular those technologies that hold promise for mitigation and adaptation.

  3. Adaptive management in the U.S. National Wildlife Refuge System: Science-management partnerships for conservation delivery

    Science.gov (United States)

    Moore, C.T.; Lonsdorf, E.V.; Knutson, M.G.; Laskowski, H.P.; Lor, S.K.

    2011-01-01

    Adaptive management is an approach to recurrent decision making in which uncertainty about the decision is reduced over time through comparison of outcomes predicted by competing models against observed values of those outcomes. The National Wildlife Refuge System (NWRS) of the U.S. Fish and Wildlife Service is a large land management program charged with making natural resource management decisions, which often are made under considerable uncertainty, severe operational constraints, and conditions that limit ability to precisely carry out actions as intended. The NWRS presents outstanding opportunities for the application of adaptive management, but also difficult challenges. We describe two cooperative programs between the Fish and Wildlife Service and the U.S. Geological Survey to implement adaptive management at scales ranging from small, single refuge applications to large, multi-refuge, multi-region projects. Our experience to date suggests three important attributes common to successful implementation: a vigorous multi-partner collaboration, practical and informative decision framework components, and a sustained commitment to the process. Administrators in both agencies should consider these attributes when developing programs to promote the use and acceptance of adaptive management in the NWRS. ?? 2010 .

  4. Adaptation of the Mathematics and Technology Attitudes Scale (MTAS) into Turkish: Validity and Reliability Studies for Middle School Students

    Science.gov (United States)

    Tabuk, Mesut

    2018-01-01

    The paper aims to present the adaptation study of "The Mathematics and Technology Attitudes Scale (MTAS)" into Turkish. The original form MTAS was developed by Pierce, Stacey and Barkatsas (2007) in order to investigate the effect of five different variables in learning mathematics with technology. The original form of the attitudes…

  5. Introduction of new technologies and decision making processes: a framework to adapt a Local Health Technology Decision Support Program for other local settings

    Directory of Open Access Journals (Sweden)

    Poulin P

    2013-11-01

    Full Text Available Paule Poulin,1 Lea Austen,1 Catherine M Scott,2 Michelle Poulin,1 Nadine Gall,2 Judy Seidel,3 René Lafrenière1 1Department of Surgery, 2Knowledge Management, 3Public Health Innovation and Decision Support, Alberta Health Services, Calgary, AB, Canada Purpose: Introducing new health technologies, including medical devices, into a local setting in a safe, effective, and transparent manner is a complex process, involving many disciplines and players within an organization. Decision making should be systematic, consistent, and transparent. It should involve translating and integrating scientific evidence, such as health technology assessment (HTA reports, with context-sensitive evidence to develop recommendations on whether and under what conditions a new technology will be introduced. However, the development of a program to support such decision making can require considerable time and resources. An alternative is to adapt a preexisting program to the new setting. Materials and methods: We describe a framework for adapting the Local HTA Decision Support Program, originally developed by the Department of Surgery and Surgical Services (Calgary, AB, Canada, for use by other departments. The framework consists of six steps: 1 development of a program review and adaptation manual, 2 education and readiness assessment of interested departments, 3 evaluation of the program by individual departments, 4 joint evaluation via retreats, 5 synthesis of feedback and program revision, and 6 evaluation of the adaptation process. Results: Nine departments revised the Local HTA Decision Support Program and expressed strong satisfaction with the adaptation process. Key elements for success were identified. Conclusion: Adaptation of a preexisting program may reduce duplication of effort, save resources, raise the health care providers' awareness of HTA, and foster constructive stakeholder engagement, which enhances the legitimacy of evidence

  6. Basic survey for promoting energy efficiency in developing countries. Database development project directory of energy conservation technology in Japan

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-02-01

    In order to promote energy conservation in developing countries, the gist of Japanese energy saving technologies was edited into a database. The Asian territory is expected of remarkable economic development and increased energy consumption including that for fossil fuels. Therefore, this project of structuring a database has urgent importance for the Asian countries. New and wide-area discussions were given to revise the 1995 edition. The committee was composed of members from high energy consuming areas such as iron and steel, paper and pulp, chemical, oil refining, cement, electric power, machinery, electric devices, and industrial machinery industries. Technical literatures and reports were referred to, and opinions were heard from specialists and committee members representing the respective areas. In order to reflect the current status and particular conditions in specific industrial areas, additions were given under the assistance and guidance from the specialists. The energy saving technologies recorded in the database may be called small to medium scale technologies, with the target placed on saving energy by 10% or more. Small-scale energy saving technologies were omitted. Flow charts for manufacturing processes were also added. (NEDO)

  7. Research on Non-Destructive Testing Technology in Conservation Repair Project of Ancestral Temple in Mukden Palace

    Science.gov (United States)

    Yang, J.; Fu, M.

    2017-08-01

    Due to the use of wood and other non-permanent materials, traditional Chinese architecture is one of the most fragile constructions in various heritage objects today. With the increasing emphasis on the protection of cultural relics, the repair project of wooden structure has become more and more important. There are various kinds of destructions, which pose a hidden danger to the overall safety of the ancient buildings, caused not only by time and nature, but also by improper repairs in history or nowadays. Today, the use of digital technology is a basic requirement in the conservation of cultural heritage. Detection technology, especially non-destructive testing technology, could provide more accurate records in capturing detailed physical characteristics of structures such as geometric deformation and invisible damage, as well as prevent a man-made destruction in the process of repair project. This paper aims to interpret with a typical example, Ancestral Temple in Mukden Palace, along with a discussion of how to use the non-destructive testing technology with ground penetrating radar, stress wave, resistograph and so on, in addition to find an appropriate protection method in repair project of traditional Chinese wooden architecture.

  8. RESEARCH ON NON-DESTRUCTIVE TESTING TECHNOLOGY IN CONSERVATION REPAIR PROJECT OF ANCESTRAL TEMPLE IN MUKDEN PALACE

    Directory of Open Access Journals (Sweden)

    J. Yang

    2017-08-01

    Full Text Available Due to the use of wood and other non-permanent materials, traditional Chinese architecture is one of the most fragile constructions in various heritage objects today. With the increasing emphasis on the protection of cultural relics, the repair project of wooden structure has become more and more important. There are various kinds of destructions, which pose a hidden danger to the overall safety of the ancient buildings, caused not only by time and nature, but also by improper repairs in history or nowadays. Today, the use of digital technology is a basic requirement in the conservation of cultural heritage. Detection technology, especially non-destructive testing technology, could provide more accurate records in capturing detailed physical characteristics of structures such as geometric deformation and invisible damage, as well as prevent a man-made destruction in the process of repair project. This paper aims to interpret with a typical example, Ancestral Temple in Mukden Palace, along with a discussion of how to use the non-destructive testing technology with ground penetrating radar, stress wave, resistograph and so on, in addition to find an appropriate protection method in repair project of traditional Chinese wooden architecture.

  9. Enhancing Extension Programs by Discussing Water Conservation Technology Adoption with Growers

    Science.gov (United States)

    Lamm, Alexa J.; Warner, Laura A.; Martin, Emmett T.; White, Sarah A.; Fisher, Paul

    2017-01-01

    Nursery growers are one of the largest agricultural users of water. Researchers have been developing new water treatment techniques and technologies for nursery growers to assist in preserving this precious resource, yet adoption within the industry has been limited. Extension professionals need to work closely with nursery growers to encourage…

  10. Conservation planning as an adaptive strategy for climate change and groundwater depletion in Wadi El Natrun, Egypt

    Science.gov (United States)

    Switzman, Harris; Salem, Boshra; Gad, Mohamed; Adeel, Zafar; Coulibaly, Paulin

    2018-05-01

    In drylands, groundwater is often the sole source of freshwater for industrial, domestic and agricultural uses, while concurrently supporting ecosystems. Many dryland aquifers are becoming depleted due to over-pumping and a lack of natural recharge, resulting in loss of storage and future water supplies, water-level declines that reduce access to freshwater, water quality problems, and, in extreme cases, geologic hazards. Conservation is often proposed as a strategy for managing groundwater to reduce or reverse the depletion, although there is a need to better understand its potential effectiveness and benefits at the local scale. This study assesses the impact of water-conservation planning strategies on groundwater resources in the Wadi El Natrun (WEN) area of northern Egypt. WEN has been subjected to groundwater depletion and quality degradation since the 1990s, attributed to agricultural and industrial groundwater usage. Initiatives have been proposed to increase the sustainability of the groundwater resource in the study area, but they have yet to be evaluated. Simultaneously, there are also proposals to increase the extent of arable land and thus demand for freshwater. In this study, three water management scenarios are developed and assessed to the 2060s for their impact on groundwater resources using a hydrogeologic model. Results demonstrate that demand management implemented through an optimized irrigation and crop rotation strategy has the greatest potential to significantly reduce risk of groundwater depletion compared to the other two scenarios—"business as usual" and "30% water-use reduction"—that were evaluated.

  11. Historic Buildings of the Warsaw University of Technology - Selected Issues of Renovation, Modernisation and Adaptation

    Directory of Open Access Journals (Sweden)

    Wagner Anna Agata

    2016-06-01

    Full Text Available The historic buildings of the Warsaw University of Technology display not only outstanding architectural values, but are also representative of the trends in preservation, restoration, and adaptation that were prevalent at the time of their modernization. The post-war rebuilding of the WUT was more akin to modernization than reconstruction. But the freedom to shape modern architectural forms in the 1960s and ’70s brought with it a lack of respect for their historic environment. A change in the approach to historic buildings and their integration with modern architecture came in the late 1970s. The most recent modernization of the WUT’s historic buildings, especially after Poland’s accession to the EU, resulted in many good examples of proper, harmonious integration between the ‘modern’ and the ‘traditional’.

  12. Historic Buildings of the Warsaw University of Technology - Selected Issues of Renovation, Modernisation and Adaptation

    Science.gov (United States)

    Wagner, Anna Agata

    2016-06-01

    The historic buildings of the Warsaw University of Technology display not only outstanding architectural values, but are also representative of the trends in preservation, restoration, and adaptation that were prevalent at the time of their modernization. The post-war rebuilding of the WUT was more akin to modernization than reconstruction. But the freedom to shape modern architectural forms in the 1960s and '70s brought with it a lack of respect for their historic environment. A change in the approach to historic buildings and their integration with modern architecture came in the late 1970s. The most recent modernization of the WUT's historic buildings, especially after Poland's accession to the EU, resulted in many good examples of proper, harmonious integration between the `modern' and the `traditional'.

  13. Development of adaptive technologies in the project biogas support for Tanzania 'BiogaST'

    Energy Technology Data Exchange (ETDEWEB)

    Becker, Philipp; Krause, Ariane [Engineers Without Boarders (Germany), Berlin (DE). MAVUNO Project (Tanzania)

    2011-07-01

    BiogaSTs goal lies in improving the rural populations living circumstances and in strengthening the economic growth of the Kagera Region in Tanzania by providing long term assistance for self-empowerment. This is to be reached by the construction of a decentralized energy supply through small, adapted biogas digesters for the use of fermentation gas as cooking energy and for further energetic applications. The sustainability of the project is ensured by accompanying training and education this environmentally friendly technology. The existing natural resources shall be used efficiently with the anaerobic fermentation of crop residues. Against the backdrop of climate protection, the project will help reduce greenhouse gas emissions while also working against the proceeding deforestation in the region. It is being implemented as a cooperation between the registered association Engineers Without Borders Germany (EWB) and the Tanzanian non-governmental organization MAVUNO Project. (orig.)

  14. User Adaptive and Context-Aware Smart Home Using Pervasive and Semantic Technologies

    Directory of Open Access Journals (Sweden)

    Aggeliki Vlachostergiou

    2016-01-01

    Full Text Available Ubiquitous Computing is moving the interaction away from the human-computer paradigm and towards the creation of smart environments that users and things, from the IoT perspective, interact with. User modeling and adaptation is consistently present having the human user as a constant but pervasive interaction introduces the need for context incorporation towards context-aware smart environments. The current article discusses both aspects of the user modeling and adaptation as well as context awareness and incorporation into the smart home domain. Users are modeled as fuzzy personas and these models are semantically related. Context information is collected via sensors and corresponds to various aspects of the pervasive interaction such as temperature and humidity, but also smart city sensors and services. This context information enhances the smart home environment via the incorporation of user defined home rules. Semantic Web technologies support the knowledge representation of this ecosystem while the overall architecture has been experimentally verified using input from the SmartSantander smart city and applying it to the SandS smart home within FIRE and FIWARE frameworks.

  15. Adaptive Learning in Medical Education: The Final Piece of Technology Enhanced Learning?

    Science.gov (United States)

    Sharma, Neel; Doherty, Iain; Dong, Chaoyan

    2017-09-01

    Technology enhanced learning (TEL) is now common practice in the field of medical education. One of the primary examples of its use is that of high fidelity simulation and computerised mannequins. Further examples include online learning modules, electronic portfolios, virtual patient interactions, massive open online courses and the flipped classroom movement. The rise of TEL has occurred primarily due to the ease of internet access enabling the retrieval and sharing of information in an instant. Furthermore, the compact nature of internet ready devices such as smartphones and laptops has meant that access to information can occur anytime and anywhere. From an educational perspective however, the current utilisation of TEL has been hindered by its lack of understanding of learners' needs. This is concerning, particularly as evidence highlights that during medical training, each individual learner has their own learning requirements and often achieves competency at different rates. In view of this, there has been interest in ensuring TEL is more learner aware and that the learning process should be more personalised. Adaptive learning can aim to achieve this by ensuring content is delivered according to the needs of the learner. This commentary highlights the move towards adaptive learning and the benefits of such an intervention.

  16. Modular, Adaptive, Reconfigurable Systems: Technology for Sustainable, Reliable, Effective, and Affordable Space Exploration

    Science.gov (United States)

    Esper, Jaime

    2004-01-01

    In order to execute the Vision for Space Exploration, we must find ways to reduce cost, system complexity, design, build, and test times, and at the same time increase flexibility to satisfy multiple functions. Modular, Adaptive, Reconfigurable System (MARS) technologies promise to set the stage for the delivery of system elements that form the building blocks of increasingly ambitious missions involving humans and robots. Today, space systems are largely specialized and built on a case-by-case basis. The notion of modularity however, is nothing new to NASA. The 1970's saw the development of the Multi-Mission Modular spacecraft (MMS). From 1980 to 1992 at least six satellites were built under this paradigm, and included such Goddard Space Flight Center missions as SSM, EUVE, UARS, and Landsat 4 and 5. Earlier versions consisted of standard subsystem "module" or "box" components that could be replaced within a structure based on predefined form factors. Although the primary motivation for MMS was faster/cheaper integration and test, standardization of interfaces, and ease of incorporating new subsystem technology, it lacked the technology maturity and programmatic "upgrade infrastructure" needed to satisfy varied mission requirements, and ultimately it lacked user buy-in. Consequently, it never evolved and was phased out. Such concepts as the Rapid Spacecraft Development Office (RSDO) with its regularly updated catalogue of prequalified busses became the preferred method for acquiring satellites. Notwithstanding, over the past 30 years since MMS inception, technology has advanced considerably and now modularity can be extended beyond the traditional MMS module or box to cover levels of integration, from the chip, card, box, subsystem, to the space system and to the system-of-systems. This paper will present the MARS architecture, cast within the historical context of MMS. Its application will be highlighted by comparing a state-of-the-art point design vs. a MARS

  17. Modular, Adaptive, Reconfigurable Systems: Technology for Sustainable, Reliable, Effective, and Affordable Space Exploration

    Science.gov (United States)

    Esper, Jaime

    2005-02-01

    In order to execute the Vision for Space Exploration, we must find ways to reduce cost, system complexity, design, build, and test times, and at the same time increase flexibility to satisfy multiple functions. Modular, Adaptive, Reconfigurable System (MARS) technologies promise to set the stage for the delivery of system elements that form the building blocks of increasingly ambitious missions involving humans and robots. Today, space systems are largely specialized and built on a case-by-case basis. The notion of modularity however, is nothing new to NASA. The 1970's saw the development of the Multi-Mission Modular spacecraft (MMS). From 1980 to 1992 at least six satellites were built under this paradigm, and included such Goddard Space Flight Center missions as SSM, EUVE, UARS, and Landsat 4 and 5. Earlier versions consisted of standard subsystem ``module'' or ``box'' components that could be replaced within a structure based on predefined form factors. Although the primary motivation for MMS was faster/cheaper integration and test, standardization of interfaces, and ease of incorporating new subsystem technology, it lacked the technology maturity and programmatic ``upgrade infrastructure'' needed to satisfy varied mission requirements, and ultimately it lacked user buy-in. Consequently, it never evolved and was phased out. Such concepts as the Rapid Spacecraft Development Office (RSDO) with its regularly updated catalogue of pre-qualified busses became the preferred method for acquiring satellites. Notwithstanding, over the past 30 years since MMS inception, technology has advanced considerably and now modularity can be extended beyond the traditional MMS module or box to cover levels of integration, from the chip, card, box, subsystem, to the space system and to the system-of-systems. This paper will present the MARS architecture, cast within the historical context of MMS. Its application will be highlighted by comparing a state-of-the-art point design vs. a

  18. Integrated Digital Technologies for the Architectural Rehabilitation & Conservation of Beinn Bhreagh Hall & Surrounding Site, Nova Scotia, Canada

    Science.gov (United States)

    Percy, K.; Ward, S.; Santana Quintero, M.; Morrison, T.

    2015-08-01

    This contribution summarizes the collaboration between Carleton Immersive Media Studio (CIMS) and Heritage Standing in the use of digital technologies to document the Beinn Bhreagh Hall historic site (house and immediate surroundings) in Baddeck, Nova Scotia for its rehabilitation and protection. The project objectives were to develop a prototype for research and training using 3D scanning, and Building Information Modelling (BIM), as well as other emerging surveying tools to understand the state of conservation of Historic Places in Canada, providing relevant and appropriate information for their rehabilitation and maintenance. The vehicle of this research was the documentation and modelling of this important landmark, the summer home of Dr. Alexander Graham Bell in Victoria County, Nova Scotia. This unique 19thC building, currently under review for designated as a national historic site.

  19. Awareness and Adoption of Soil and Water Conservation Technologies in a Developing Country: A Case of Nabajuzi Watershed in Central Uganda

    Science.gov (United States)

    Kagoya, Sarah; Paudel, Krishna P.; Daniel, Nadhomi L.

    2018-02-01

    Soil and water conservation technologies have been widely available in most parts of Uganda. However, not only has the adoption rate been low but also many farmers seem not to be aware of these technologies. This study aims at identifying the factors that influence awareness and adoption of soil and water conservation technologies in Nabajuzi watershed in central Uganda. A bivariate probit model was used to examine farmers' awareness and adoption of soil and water conservation technologies in the watershed. We use data collected from the interview of 400 households located in the watershed to understand the factors affecting the awareness and adoption of these technologies in the study area. Findings indicate that the likelihood of being aware and adopting the technologies are explained by the age of household head, being a tenant, and number of years of access to farmland. To increase awareness and adoption of technologies in Uganda, policymakers may expedite the process of land titling as farmers may feel secure about landholding and thus adopt these technologies to increase profitability and productivity in the long run. Incentive payments to farmers residing in the vulnerable region to adopt these considered technologies may help to alleviate soil deterioration problems in the affected area.

  20. Potential of conservation agriculture (CA) for climate change adaptation and food security under rainfed uplands of India

    NARCIS (Netherlands)

    Pradhan, Aliza; Chan, Catherine; Roul, Pravat Kumar; Halbrendt, Jacqueline; Sipes, Brent

    2018-01-01

    Rainfed agro-ecosystems, the purported grey patches untouched by the Green Revolution or most technological advances, occupy a prominent position in Indian agriculture. Cropping intensities and crop yields are low and unstable in these areas due to unpredictable patterns of rainfall, a host of

  1. Introduction of new technologies and decision making processes: a framework to adapt a Local Health Technology Decision Support Program for other local settings.

    Science.gov (United States)

    Poulin, Paule; Austen, Lea; Scott, Catherine M; Poulin, Michelle; Gall, Nadine; Seidel, Judy; Lafrenière, René

    2013-01-01

    Introducing new health technologies, including medical devices, into a local setting in a safe, effective, and transparent manner is a complex process, involving many disciplines and players within an organization. Decision making should be systematic, consistent, and transparent. It should involve translating and integrating scientific evidence, such as health technology assessment (HTA) reports, with context-sensitive evidence to develop recommendations on whether and under what conditions a new technology will be introduced. However, the development of a program to support such decision making can require considerable time and resources. An alternative is to adapt a preexisting program to the new setting. We describe a framework for adapting the Local HTA Decision Support Program, originally developed by the Department of Surgery and Surgical Services (Calgary, AB, Canada), for use by other departments. The framework consists of six steps: 1) development of a program review and adaptation manual, 2) education and readiness assessment of interested departments, 3) evaluation of the program by individual departments, 4) joint evaluation via retreats, 5) synthesis of feedback and program revision, and 6) evaluation of the adaptation process. Nine departments revised the Local HTA Decision Support Program and expressed strong satisfaction with the adaptation process. Key elements for success were identified. Adaptation of a preexisting program may reduce duplication of effort, save resources, raise the health care providers' awareness of HTA, and foster constructive stakeholder engagement, which enhances the legitimacy of evidence-informed recommendations for introducing new health technologies. We encourage others to use this framework for program adaptation and to report their experiences.

  2. Determinants of farmers’ perception to invest in soil and water conservation technologies in the North-Western Highlands of Ethiopia

    Directory of Open Access Journals (Sweden)

    Desalew Meseret Moges

    2017-03-01

    Full Text Available Soil erosion by water is a severe and continuous ecological problem in the north-western Highlands of Ethiopia. Limited perception of farmers to practice soil and water conservation (SWC technologies is one of the major causes that have resulted accelerated soil erosion. Therefore, this paper examines the major determinants of farmers’ perception to use and invest in SWC technologies in Ankasha District, north-western highlands of Ethiopia. A detailed field survey was carried out among 338 households, randomly selected from two rural sample kebeles (called villages here after. Descriptive statistics and logistic regression model were used to analyse the effects of multiple variables on farmers’ perception. The results indicate that educational level of the respondents and their access to trainings were found to have a positive and very significant association (P<0.01 with farmers’ perception. Likewise, land ownership, plot size, slope type, and extension contact positively and significantly influenced farmers’ perception at 5% level of significance. On the other hand, the influence of respondents’ age and plot distance from the homestead was found to be negative and significant (P<0.05. The overall results of this study indicate that the perception of farmers to invest in SWC technologies was highly determined by socioeconomic, institutional, attitudinal and biophysical factors. Thus, a better understanding of constrains that influence farmers' perception is very important while designing and implementing SWC technologies. Frequent contacts between farmers and extension agents and continues agricultural trainings are also needed to increase awareness of the impacts of SWC benefits.

  3. Chemometrics-based process analytical technology (PAT) tools: applications and adaptation in pharmaceutical and biopharmaceutical industries.

    Science.gov (United States)

    Challa, Shruthi; Potumarthi, Ravichandra

    2013-01-01

    Process analytical technology (PAT) is used to monitor and control critical process parameters in raw materials and in-process products to maintain the critical quality attributes and build quality into the product. Process analytical technology can be successfully implemented in pharmaceutical and biopharmaceutical industries not only to impart quality into the products but also to prevent out-of-specifications and improve the productivity. PAT implementation eliminates the drawbacks of traditional methods which involves excessive sampling and facilitates rapid testing through direct sampling without any destruction of sample. However, to successfully adapt PAT tools into pharmaceutical and biopharmaceutical environment, thorough understanding of the process is needed along with mathematical and statistical tools to analyze large multidimensional spectral data generated by PAT tools. Chemometrics is a chemical discipline which incorporates both statistical and mathematical methods to obtain and analyze relevant information from PAT spectral tools. Applications of commonly used PAT tools in combination with appropriate chemometric method along with their advantages and working principle are discussed. Finally, systematic application of PAT tools in biopharmaceutical environment to control critical process parameters for achieving product quality is diagrammatically represented.

  4. Adaptable Deployable Entry & Placement Technology (ADEPT) for Cubesat Delivery to Mars Surface

    Science.gov (United States)

    Wercinski, Paul

    2014-01-01

    The Adaptable, Deployable Entry and Placement Technology (ADEPT), uses a mechanical skeleton to deploy a revolutionary carbon fabric system that serves as both heat shield and primary structure during atmospheric entry. The NASA ADEPT project, currently funded by the Game Changing Development Program in STMD is currently focused on 1m class hypersonic decelerators for the delivery of very small payloads ( 5 kg) to locations of interest in an effort to leverage low-cost platforms to rapidly mature the technology while simultaneously delivering high-value science. Preliminary mission design and aerothermal performance testing in arcjets have shown the ADEPT system is quite capable of safe delivery of cubesats to Mars surface. The ability of the ADEPT to transit to Mars in a stowed configuration (similar to an umbrella) provides options for integration with the Mars 2020 cruise stage, even to consider multiple ADEPTs. System-level test campaigns are underway for FY15 execution or planning for FY16. These include deployment testing, wind tunnel testing, system-level arc jet testing, and a sounding rocket flight test. The goal is system level maturation (TRL 6) at a 1m class Mars design reference mission configuration.

  5. Not Yet the Post-TV Era: Network and MVPD Adaptation to Emergent Distribution Technologies

    Directory of Open Access Journals (Sweden)

    Mike Van Esler

    2016-07-01

    Full Text Available Television as a medium is in transition. From DVRs, to Netflix, to HBO Now, consumers have never before had such control over how they consume televisual content. The rapid changes to the medium have led to rhetoric heralding the impending “post-TV era.” Looking at the ways that legacy television companies have adapted to new technologies and cultural practices suggests that rather than traditional television going the way of radio, television as a medium is actually not terribly different, at least not enough to conclude that we have entered a new era. Press releases, discursive practices by the news media, corporate structures and investments, and audience research all point to the rhetoric of post-TV as being overblown. By thinking about contemporary television as being in transition, greater emphasis and attention can be placed on the role that major media conglomerates play in developing, funding, and legitimizing new forms of television distribution, in addition to co-opting disruptive technologies and business models while hindering others.

  6. Adaptive statistical iterative reconstruction technology in the application of PET/CT whole body scans

    International Nuclear Information System (INIS)

    Xin Jun; Zhao Zhoushe; Li Hong; Lu Zhe; Wu Wenkai; Guo Qiyong

    2013-01-01

    Objective: To improve image quality of low dose CT in whole body PET/CT using adaptive statistical iterative reconstruction (ASiR) technology. Methods: Twice CT scans were performed with GE water model,scan parameters were: 120 kV, 120 and 300 mA respectively. In addition, 30 subjects treated with PET/CT were selected randomly, whole body PET/CT were performed after 18 F-FDG injection of 3.70 MBq/kg, Sharp IR+time of flight + VUE Point HD technology were used for 1.5 min/bed in PET; CT of spiral scan was performed under 120 kV using automatic exposure control technology (30-210 mA, noise index 25). Model and patients whole body CT images were reconstructed with conventional and 40% ASiR methods respectively, and the CT attenuation value and noise index were measured. Results: Research of model and clinical showed that standard deviation of ASiR method in model CT was 33.0% lower than the conventional CT reconstruction method (t =27.76, P<0.01), standard deviation of CT in normal tissues (brain, lung, mediastinum, liver and vertebral body) and lesions (brain, lung, mediastinum, liver and vertebral body) reduced by 21.08% (t =23.35, P<0.01) and 24.43% (t =16.15, P<0.01) respectively, especially for normal liver tissue and liver lesions, standard deviations of CT were reduced by 51.33% (t=34.21, P<0.0) and 49.54% (t=15.21, P<0.01) respectively. Conclusion: ASiR reconstruction method was significantly reduced the noise of low dose CT image and improved the quality of CT image in whole body PET/CT, which seems more suitable for quantitative analysis and clinical applications. (authors)

  7. Bridging the gap: adapting advanced display technologies for use in hybrid control rooms

    International Nuclear Information System (INIS)

    Jokstad, Håkon; Boring, Ronald

    2015-01-01

    The Institute for Energy Technology (IFE), runs the OECD Halden Reactor Project (HRP), featuring a state-of-the-art research simulator facility in Halden, Norway, called HAMMLAB. HAMMLAB serves two main purposes: the study of human behaviour in interaction with complex process systems; and the development, test and evaluation of prototype control centres and their individual systems. By studying operator performance in HAMMLAB and integrating the knowledge gained into new designs, the HRP contributes to improving operational safety, reliability, efficiency and productivity. The U.S. Department of Energy's (DOE) Light Water Reactor Sustainability (LWRS) Program has contracted IFE to assist DOE national laboratory staff at Idaho National Laboratory (INL) in adapting HAMMLAB design concepts for the purpose of control room modernization at nuclear power plants in the U.S. In support of this effort, the DOE has built a simulator research facility at INL called the Human Systems Simulation Laboratory (HSSL). The HSSL is centered on control room modernization, in which industry provided plant instrumentation and controls are modified for upgrade opportunities. The HSSL houses the LWRS simulator, which is a reconfigurable full-scale and full-scope control room simulator. Consisting of 45 large touchscreens on 15 panels, the LWRS simulator is currently using this glass top technology to digitally represent and replicate the functionality of the analog I&C systems in existing control rooms. The LWRS simulator is reconfigurable in that different plant training simulator models obtained from the utilities can be run on the panels, and the panels can be physically moved and arranged to mimic the layout of those control rooms. The glass top technology and reconfigurability capabilities allow the LWRS simulator to be the research platform that is necessary to design, prototype, and validate human-system interface (HSI) technologies that can replace existing analog I&C. IFE

  8. Bridging the gap: adapting advanced display technologies for use in hybrid control rooms

    Energy Technology Data Exchange (ETDEWEB)

    Jokstad, Håkon [Inst. for Energy Technology, Halden (Norway); Boring, Ronald [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-02-01

    The Institute for Energy Technology (IFE), runs the OECD Halden Reactor Project (HRP), featuring a state-of-the-art research simulator facility in Halden, Norway, called HAMMLAB. HAMMLAB serves two main purposes: the study of human behaviour in interaction with complex process systems; and the development, test and evaluation of prototype control centres and their individual systems. By studying operator performance in HAMMLAB and integrating the knowledge gained into new designs, the HRP contributes to improving operational safety, reliability, efficiency and productivity. The U.S. Department of Energy’s (DOE) Light Water Reactor Sustainability (LWRS) Program has contracted IFE to assist DOE national laboratory staff at Idaho National Laboratory (INL) in adapting HAMMLAB design concepts for the purpose of control room modernization at nuclear power plants in the U.S. In support of this effort, the DOE has built a simulator research facility at INL called the Human Systems Simulation Laboratory (HSSL). The HSSL is centered on control room modernization, in which industry provided plant instrumentation and controls are modified for upgrade opportunities. The HSSL houses the LWRS simulator, which is a reconfigurable full-scale and full-scope control room simulator. Consisting of 45 large touchscreens on 15 panels, the LWRS simulator is currently using this glass top technology to digitally represent and replicate the functionality of the analog I&C systems in existing control rooms. The LWRS simulator is reconfigurable in that different plant training simulator models obtained from the utilities can be run on the panels, and the panels can be physically moved and arranged to mimic the layout of those control rooms. The glass top technology and reconfigurability capabilities allow the LWRS simulator to be the research platform that is necessary to design, prototype, and validate human-system interface (HSI) technologies that can replace existing analog I&C. IFE has

  9. Proposal for adaptive management to conserve biotic integrity in a regulated segment of the Tallapoosa River, Alabama, U.S.A

    Science.gov (United States)

    Irwin, Elise R.; Freeman, Mary C.

    2002-01-01

    Conserving river biota will require innovative approaches that foster and utilize scientific understanding of ecosystem responses to alternative river-management scenarios. We describe ecological and societal issues involved in flow management of a section of the Tallapoosa River (Alabama, U.S.A.) in which a species-rich native fauna is adversely affected by flow alteration by an upstream hydropower dam. We hypothesize that depleted Iow flows, flow instability and thermal alteration resulting from pulsed flow releases at the hydropower dam are most responsible for changes in the Tallapoosa River biota. However, existing data are insufficient to prescribe with certainty minimum flow levels or the frequency and duration of stable flow periods that would be necessary or sufficient to protect riverine biotic integrity. Rather than negotiate a specific change in the flow regime, we propose that stakeholders--including management agencies, the power utility, and river advocates--engage in a process of adaptive-flow management. This process would require that stakeholders (1) develop and agree to management objectives; (2) model hypothesized relations between dam operations and management objectives; (3) implement a change in dam operations; and (4) evaluate biological responses and other stakeholder benefits through an externally reviewed monitoring program. Models would be updated with monitoring data and stakeholders would agree to further modify flow regimes as necessary to achieve management objectives. A primary obstacle to adaptive management will be a perceived uncertainty of future costs for the power utility and other stakeholders. However, an adaptive, iterative approach offers the best opportunity for improving flow regimes for native biota while gaining information critical to guiding management decisions in other flow-regulated rivers.

  10. Older mothers follow conservative strategies under predator pressure: the adaptive role of maternal glucocorticoids in yellow-bellied marmots.

    Science.gov (United States)

    Monclús, Raquel; Tiulim, Justin; Blumstein, Daniel T

    2011-11-01

    When the maternal environment is a good predictor of the offspring environment, maternal glucocorticoid (GC) levels might serve to pre-program offspring to express certain phenotypes or life-history characteristics that will increase their fitness. We conducted a field study to assess the effects of naturally occurring maternal GC levels on their offspring in yellow-bellied marmots (Marmota flaviventris) subjected to different predator pressures. Maternal fecal corticosteroid metabolites (FCM) were positively correlated with predator pressure. Predators had both direct and indirect effects on pups. We found that older mothers with higher FCM levels had smaller and female-biased litters. Moreover, sons from older mothers with high FCM levels dispersed significantly more than those from older mothers with low FCM levels, whereas the opposite pattern was found in pups from younger mothers. These age-related effects may permit females to make adaptive decisions that increase their pups' fitness according to their current situation. Copyright © 2011 Elsevier Inc. All rights reserved.

  11. The Potential Phosphorus Crisis: Resource Conservation and Possible Escape Technologies: A Review

    Directory of Open Access Journals (Sweden)

    Saba Daneshgar

    2018-06-01

    Full Text Available Phosphorus is an essential nutrient for every organism on the Earth, yet it is also a potential environmental pollutant, which may cause eutrophication of water bodies. Wastewater treatment plants worldwide are struggling to eliminate phosphorus from effluents, at great cost, yet current research suggests that the world may deplete the more available phosphorus reserves by around 2300. This, in addition to environmental concerns, evokes the need for new phosphorus recovery techniques to be developed, to meet future generations needs for renewable phosphorus supply. Many studies have been, and are, carried out on phosphorus recovery from wastewater and its sludge, due to their high phosphorus content. Chemical precipitation is the main process for achieving a phosphorus-containing mineral suitable for reuse as a fertilizer, such as struvite. This paper reviews the current status and future trends of phosphorus production and consumption, and summarizes current recovery technologies, discussing their possible integration into wastewater treatment processes, according to a more sustainable water-energy-nutrient nexus.

  12. "Brace Technology" Thematic Series - The Lyon approach to the conservative treatment of scoliosis

    Directory of Open Access Journals (Sweden)

    Lecante Cyril

    2011-03-01

    Full Text Available Abstract The Lyon Brace, or adjustable multi-shell brace, has been used for more than 60 years. The use and function of the Lyon Brace includes: - The utilization of one or two corrective plaster casts, which enables a true lengthening of the concave ligaments. - An oriented CAD-CAM moulding in 3D auto correction after the removal of the plaster cast. - A blueprint adapted to Lenke's classification. - A specific physiotherapy program. Background Pierre Stagnara created the Lyon Brace in 1947. The brace has the following characteristics: - It adjusts to allow for a child's growth of up to seven centimetres and for an increase in weight of up to seven kilograms. - It is 'active' in that the rigidity of the PMM (polymetacrylate of methyl structure stimulates the user to auto-correct. The active axial auto-correction decreases the pressures of the brace on the trunk. - It is decompressive in that the effect of extension between the two pelvic and scapular girdles decreases the pressure on the intervertebral disc allowing for more effective pushes in the other planes. - It is symmetrical making it both more aesthetically pleasing and easier to build. - It is stable at both shoulders and pelvic girdle, facilitating the intermediate 3D corrections. - It is transparent. The pressure of the shells on the skin can be directly controlled so "pads" are usually not necessary. Brace description Two metal bars are fixed vertically, one anterior the other posterior and all shells are attached from the bottom to the top in this order: - Two pelvic shells ensure an optimal stability of the brace. - One lumbar shell T12-L4, which can be either independent or extending, at the abdominal chondrocostal level. - One thoracic shell at the level of the thoracic convexity. - One opposite thoracic shell used as a counter push. - One shoulder balance shell on the side of the thoracic convexity. Long term follow up results This is a retrospective study of 1,338 completed

  13. Wastewater treatment technologies to satisfy 1990's energy conservation/pollution prevention goals

    International Nuclear Information System (INIS)

    Keith, L.W.; Beers, A.R.

    1993-01-01

    Anheuser-Busch, like most other companies, relied through the mid-1970's on end-of-pipe, energy-intensive aerobic treatment systems for its wastewater. Little if any attention was placed on source reduction. There are several factors that help explain why industry had adopted this approach. Energy was relatively cheap, sludge disposal was not a major problem and many municipalities provided wastewater treatment capacity to industry as an inducement for industry to locate there. The saying for A-B was open-quotes We know how to make beer - municipalities know how to treat our wastewater - let's not mix the two.close quotes The 1973 oil embargo and the resulting mid-1970's energy crisis changed Anheuser-Busch's wastewater treatment philosophy. The days of cheap energy and wastewater treatment were gone. This was only exaggerated by the more stringent treatment requirements resulting from the passage of PL92-500 (Clean Water Act). Increasing sludge disposal problems with associated increased disposal costs also occurred. From the mid-1970's to the mid-1980's Anheuser-Busch performed significant developmental work on land application of wastewater. This technology, which requires only about 10% of the energy of aerobic activated sludge treatment systems and produces no sludge for disposal, was installed at six Anheuser-Busch locations. During this time period considerable improvement was made in the area of waste load reduction. However, the main driving force was economics; that is, it was done if cheaper than wastewater treatment. Anheuser-Busch still had a basic end-of-pipe treatment philosophy

  14. Usability of clinical decision support system as a facilitator for learning the assistive technology adaptation process.

    Science.gov (United States)

    Danial-Saad, Alexandra; Kuflik, Tsvi; Weiss, Patrice L Tamar; Schreuer, Naomi

    2016-01-01

    The aim of this study was to evaluate the usability of Ontology Supported Computerized Assistive Technology Recommender (OSCAR), a Clinical Decision Support System (CDSS) for the assistive technology adaptation process, its impact on learning the matching process, and to determine the relationship between its usability and learnability. Two groups of expert and novice clinicians (total, n = 26) took part in this study. Each group filled out system usability scale (SUS) to evaluate OSCAR's usability. The novice group completed a learning questionnaire to assess OSCAR's effect on their ability to learn the matching process. Both groups rated OSCAR's usability as "very good", (M [SUS] = 80.7, SD = 11.6, median = 83.7) by the novices, and (M [SUS] = 81.2, SD = 6.8, median = 81.2) by the experts. The Mann-Whitney results indicated that no significant differences were found between the expert and novice groups in terms of OSCAR's usability. A significant positive correlation existed between the usability of OSCAR and the ability to learn the adaptation process (rs = 0.46, p = 0.04). Usability is an important factor in the acceptance of a system. The successful application of user-centered design principles during the development of OSCAR may serve as a case study that models the significant elements to be considered, theoretically and practically in developing other systems. Implications for Rehabilitation Creating a CDSS with a focus on its usability is an important factor for its acceptance by its users. Successful usability outcomes can impact the learning process of the subject matter in general, and the AT prescription process in particular. The successful application of User-Centered Design principles during the development of OSCAR may serve as a case study that models the significant elements to be considered, theoretically and practically. The study emphasizes the importance of close collaboration between the developers and

  15. Evaluation of the adaptation of zirconia-based fixed partial dentures using micro-CT technology

    Energy Technology Data Exchange (ETDEWEB)

    Borba, Marcia; Bona, Alvaro Della, E-mail: marcia_borb@hotmail.com [Universidade de Passo Fundo (UPF), RS (Brazil). Fac. de Odontologia; Miranda Junior, Walter Gomes; Cesar, Paulo Francisco [Universidade de Sao Paulo (USP), SP (Brazil). Fac. de Odontologia. Dept. de Biomateriais e Bioquimica Oral; Griggs, Jason Allan [Department of Biomedical Materials Science, Dental School, University of Mississippi Medical Center - UMMC, Jackson, MS (United States)

    2013-09-15

    The objective of the study was to measure the marginal and internal fit of zirconia-based all-ceramic three-unit fixed partial dentures (FPDs) (Y-TZP - LAVA, 3M-ESPE), using a novel methodology based on micro-computed tomography (micro-CT) technology. Stainless steel models of prepared abutments were fabricated to design FPDs. Ten frameworks were produced with 9 mm² connector cross-sections using a LAVA® CAD-CAM system. All FPDs were veneered with a compatible porcelain. Each FPD was seated on the original model and scanned using micro-CT. Files were processed using NRecon and CTAn software. Adobe Photoshop and Image J software were used to analyze the cross sectional images. Five measuring points were selected, as follows: MG- marginal gap; CA - chamfer area; AW - axial wall; AOT - axio-occlusal transition area; OA - occlusal area. Results were statistically analyzed by Kruskall-Wallis and Tukey's post hoc test (α = 0.05). There were significant differences for the gap width between the measurement points evaluated. MG showed the smallest median gap width (42 μm). OA had the highest median gap dimension (125 μm), followed by the AOT point (105 μm). CA and AW gap width values were statistically similar, 66 and 65 μm respectively. Thus, it was possible to conclude that different levels of adaptation were observed within the FPD, at the different measuring points. In addition, the micro-CT technology seems to be a reliable tool to evaluate the fit of dental restorations. (author)

  16. Evaluation of the adaptation of zirconia-based fixed partial dentures using micro-CT technology

    International Nuclear Information System (INIS)

    Borba, Marcia; Bona, Alvaro Della

    2013-01-01

    The objective of the study was to measure the marginal and internal fit of zirconia-based all-ceramic three-unit fixed partial dentures (FPDs) (Y-TZP - LAVA, 3M-ESPE), using a novel methodology based on micro-computed tomography (micro-CT) technology. Stainless steel models of prepared abutments were fabricated to design FPDs. Ten frameworks were produced with 9 mm² connector cross-sections using a LAVA® CAD-CAM system. All FPDs were veneered with a compatible porcelain. Each FPD was seated on the original model and scanned using micro-CT. Files were processed using NRecon and CTAn software. Adobe Photoshop and Image J software were used to analyze the cross sectional images. Five measuring points were selected, as follows: MG- marginal gap; CA - chamfer area; AW - axial wall; AOT - axio-occlusal transition area; OA - occlusal area. Results were statistically analyzed by Kruskall-Wallis and Tukey's post hoc test (α = 0.05). There were significant differences for the gap width between the measurement points evaluated. MG showed the smallest median gap width (42 μm). OA had the highest median gap dimension (125 μm), followed by the AOT point (105 μm). CA and AW gap width values were statistically similar, 66 and 65 μm respectively. Thus, it was possible to conclude that different levels of adaptation were observed within the FPD, at the different measuring points. In addition, the micro-CT technology seems to be a reliable tool to evaluate the fit of dental restorations. (author)

  17. Evaluation of the adaptation of zirconia-based fixed partial dentures using micro-CT technology

    Directory of Open Access Journals (Sweden)

    Marcia Borba

    2013-09-01

    Full Text Available The objective of the study was to measure the marginal and internal fit of zirconia-based all-ceramic three-unit fixed partial dentures (FPDs (Y-TZP - LAVA, 3M-ESPE, using a novel methodology based on micro-computed tomography (micro-CT technology. Stainless steel models of prepared abutments were fabricated to design FPDs. Ten frameworks were produced with 9 mm2 connector cross-sections using a LAVATM CAD-CAM system. All FPDs were veneered with a compatible porcelain. Each FPD was seated on the original model and scanned using micro-CT. Files were processed using NRecon and CTAn software. Adobe Photoshop and Image J software were used to analyze the cross-sectional images. Five measuring points were selected, as follows: MG - marginal gap; CA - chamfer area; AW - axial wall; AOT - axio-occlusal transition area; OA - occlusal area. Results were statistically analyzed by Kruskall-Wallis and Tukey's post hoc test (α= 0.05. There were significant differences for the gap width between the measurement points evaluated. MG showed the smallest median gap width (42 µm. OA had the highest median gap dimension (125 µm, followed by the AOT point (105 µm. CA and AW gap width values were statistically similar, 66 and 65 µm respectively. Thus, it was possible to conclude that different levels of adaptation were observed within the FPD, at the different measuring points. In addition, the micro-CT technology seems to be a reliable tool to evaluate the fit of dental restorations.

  18. Cryopreservation and other assisted reproductive technologies for the conservation of threatened amphibians and reptiles: bringing the ARTs up to speed.

    Science.gov (United States)

    Clulow, John; Clulow, Simon

    2016-06-01

    Amphibians and reptiles are experiencing serious declines, with the number of threatened species and extinctions growing rapidly as the modern biodiversity crisis unfolds. For amphibians, the panzootic of chytridiomycosis is a major driver. For reptiles, habitat loss and harvesting from the wild are key threats. Cryopreservation and other assisted reproductive technologies (ARTs) could play a role in slowing the loss of amphibian and reptile biodiversity and managing threatened populations through genome storage and the production of live animals from stored material. These vertebrate classes are at different stages of development in cryopreservation and other ARTs, and each class faces different technical challenges arising from the separate evolutionary end-points of their reproductive biology. For amphibians, the generation of live offspring from cryopreserved spermatozoa has been achieved, but the cryopreservation of oocytes and embryos remains elusive. With reptiles, spermatozoa have been cryopreserved in a few species, but no offspring from cryopreserved spermatozoa have been reported, and the generation of live young from AI has only occurred in a small number of species. Cryopreservation and ARTs are more developed and advanced for amphibians than reptiles. Future work on both groups needs to concentrate on achieving proof of concept examples that demonstrate the use of genome storage and ARTs in successfully recovering threatened species to increase awareness and support for this approach to conservation.

  19. Quantifying the effectiveness of conservation measures to control the spread of anthropogenic hybridization in stream salmonids: a climate adaptation case study

    Science.gov (United States)

    Al-Chokhachy, Robert K.; Muhlfeld, Clint C.; Boyer, Matthew; Jones, Leslie A.; Steed, Amber; Kershner, Jeffrey L.

    2014-01-01

    Quantifying the effectiveness of management actions to mitigate the effects of changing climatic conditions (i.e., climate adaptation) can be difficult, yet critical for conservation. We used population genetic data from 1984 to 2011 to assess the degree to which ambient climatic conditions and targeted suppression of sources of nonnative Rainbow Trout Oncorhynchus mykiss have influenced the spread of introgressive hybridization in native populations of Westslope Cutthroat Trout O. clarkii lewisi. We found rapid expansion in the spatial distribution and proportion of nonnative genetic admixture in hybridized populations from 1984 to 2004, but minimal change since 2004. The spread of hybridization was negatively correlated with the number of streamflow events in May that exceeded the 75th percentile of historic flows (r = −0.98) and positively correlated with August stream temperatures (r = 0.89). Concomitantly, suppression data showed a 60% decline in catch per unit effort for fish with a high proportion of Rainbow Trout admixture, rendering some uncertainty as to the relative strength of factors controlling the spread of hybridization. Our results illustrate the importance of initiating management actions to mitigate the potential effects of climate change, even where data describing the effectiveness of such actions are initially limited but the risks are severe.

  20. Industrial energy conservation technology

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, P.S.; Williams, M.A. (eds.)

    1980-01-01

    A separate abstract was prepared for each of the 60 papers included in this volume, all of which will appear in Energy Research Abstracts (ERA); 21 were selected for Energy Abstracts for Policy Analysis (EAPA). (MCW)

  1. Industrial Energy Conservation Technology

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    A separate abstract was prepared for each of the 55 papers presented in this volume, all of which will appear in Energy Research Abstracts (ERA); 18 were selected for Energy Abstracts for Policy Analysis (EAPA). (MCW)

  2. When should irrigators invest in more water-efficient technologies as an adaptation to climate change?

    Science.gov (United States)

    Malek, K.; Adam, J. C.; Stockle, C.; Brady, M.; Yoder, J.

    2015-12-01

    The western US is expected to experience more frequent droughts with higher magnitudes and persistence due to the climate change, with potentially large impacts on agricultural productivity and the economy. Irrigated farmers have many options for minimizing drought impacts including changing crops, engaging in water markets, and switching irrigation technologies. Switching to more efficient irrigation technologies, which increase water availability in the crop root zone through reduction of irrigation losses, receives significant attention because of the promise of maintaining current production with less. However, more efficient irrigation systems are almost always more capital-intensive adaptation strategy particularly compared to changing crops or trading water. A farmer's decision to switch will depend on how much money they project to save from reducing drought damages. The objective of this study is to explore when (and under what climate change scenarios) it makes sense economically for farmers to invest in a new irrigation system. This study was performed over the Yakima River Basin (YRB) in Washington State, although the tools and information gained from this study are transferable to other watersheds in the western US. We used VIC-CropSyst, a large-scale grid-based modeling framework that simulates hydrological processes while mechanistically capturing crop water use, growth and development. The water flows simulated by VIC-CropSyst were used to run the RiverWare river system and water management model (YAK-RW), which simulates river processes and calculates regional water availability for agricultural use each day (i.e., the prorationing ratio). An automated computational platform has been developed and programed to perform the economic analysis for each grid cell, crop types and future climate projections separately, which allows us to explore whether or not implementing a new irrigation system is economically viable. Results of this study indicate that

  3. Structures and Mechanisms Design Concepts for Adaptive Deployable Entry Placement Technology

    Science.gov (United States)

    Yount, Bryan C.; Arnold, James O.; Gage, Peter J.; Mockelman, Jeffrey; Venkatapathy, Ethiraj

    2012-01-01

    System studies have shown that large deployable aerodynamic decelerators such as the Adaptive Deployable Entry and Placement Technology (ADEPT) concept can revolutionize future robotic and human exploration missions involving atmospheric entry, descent and landing by significantly reducing the maximum heating rate, total heat load, and deceleration loads experienced by the spacecraft during entry [1-3]. ADEPT and the Hypersonic Inflatable Aerodynamic Decelerator (HIAD) [4] share the approach of stowing the entry system in the shroud of the launch vehicle and deploying it to a much larger diameter prior to entry. The ADEPT concept provides a low ballistic coefficient for planetary entry by employing an umbrella-like deployable structure consisting of ribs, struts and a fabric cover that form an aerodynamic decelerator capable of undergoing hypersonic flight. The ADEPT "skin" is a 3-D woven carbon cloth that serves as a thermal protection system (TPS) and as a structural surface that transfers aerodynamic forces to the underlying ribs [5]. This paper focuses on design activities associated with integrating ADEPT components (cloth, ribs, struts and mechanisms) into a system that can function across all configurations and environments of a typical mission concept: stowed during launch, in-space deployment, entry, descent, parachute deployment and separation from the landing payload. The baseline structures and mechanisms were selected via trade studies conducted during the summer and fall of 2012. They are now being incorporated into the design of a ground test article (GTA) that will be fabricated in 2013. It will be used to evaluate retention of the stowed configuration in a launch environment, mechanism operation for release, deployment and locking, and static strength of the deployed decelerator. Of particular interest are the carbon cloth interfaces, underlying hot structure, (Advanced Carbon- Carbon ribs) and other structural components (nose cap, struts, and

  4. NEURO ENGINEERING TECHNOLOGY TO ACCELERATE THE HUMAN ADAPTATION TO HIGH ALTITUDE HYPOXIA

    Directory of Open Access Journals (Sweden)

    Mukhamed T. Shaov

    2018-01-01

    Full Text Available Abstract. The aim is to study the influence of neuro-information signals modulated by pulse hypoxia on the rhythm of cardiac contractions in low-mountain and high-mountain conditions. Methods. Heart rate was measured using the pulse oxymetry device ELOX-01M2. The impact analysis of information-wave signals was carried out with the help of the neuro-protector "Anthropotherapist", non-invasively (remotely at a distance of up to 5 meters for 5 min. /day during 10 days. The investigations were carried out in lowmountain conditions (city of Nalchik, 550 m above sea level and highlands, Mount Elbrus (site of "Garabashi", 3780 m. above sea level. Participants in the study were divided into groups: control group – 18 participants; experimental group - 18 participants. In the low-mountain and high-mountain conditions, the control group was not affected by the neuro-protector. In high-mountain conditions, the participants in the control group experienced only the effects of high-altitude hypoxia sessions. The experimental group was exposed to the neuro-information signals from the neuro-protector. High-altitude studies were carried out in the following mode: heart rate was recorded at the altitudes of Nalchik - exit to Elbrus – on the way to the site of "Garabashi" - return route to Nalchik. Results. It was found that with frequency exposure, there is a significant decrease and fluctuations in heart rate in low-mountain inhabitants. The stability of these changes in the rhythm of cardiac activity can also be seen in conditions of high-altitude hypoxia. Conclusion. Consequently, the proposed mode of frequency impact, implemented using the "Anthropotherapist" neuro-protector technology, can form a stage of adaptation to hypoxia and unfavorable climatic and environmental factors.

  5. Cross-cultural adaptation of the assistive technology device - Predisposition assessment (ATD PA) for use in Brazil (ATD PA Br).

    Science.gov (United States)

    Alves, Ana Cristina de Jesus; Matsukura, Thelma Simões; Scherer, Marcia J

    2017-02-01

    The purpose of this study is to conduct a cross-cultural adaptation of the Assistive Technology Device Predisposition Assessment (ATD PA) for use in Brazil. The selection of the Assistive Technology Device Predisposition Assessment (ATD PA) was determined by previous literature reviews of articles published in 2014 and 2016 in six databases with the terms "assistive device" or "assistive technology" or "self-help device" combined with "evidence-based practice" or "framework" or "measurement scale" or "model and outcome assessment". This review indicated that the conceptual model of Assistive Technology (AT) most discussed in the literature was the Matching Person and Technology (MPT) model, and this finding determined the selection of ATD PA as an assessment within the MPT portfolio of measures. The procedures for cross-cultural adaptation were as follows: Equivalence of Concept, Semantic and Operational. Five experts were asked to translate 725 items and these translations were evaluated and a high level of agreement was demonstrated. The Portuguese version, Avaliação de Tecnologia Assistiva - Predisposição ao Uso - ATD PA Br, was derived from the original version in English (ATD PA). The ATD PA Br will support professionals and people with disabilities in Brazil to better select AT devices according to the clients' needs. Implications for rehabilitation Provides a systematic way of selecting assistive technology devices for the use of individuals with disabilities according to the Brazilian reality. A systematic way of selecting the assistive technology that can help decrease the abandonment of the assistive technology use. The use of the Matching Person and Technology theorical model and of the assessment ATD PA Br is essential to guide the researches and clinical practice in Brazil.

  6. Innovations in advanced technology for learning : authoring for adaptive educational hypermedia

    NARCIS (Netherlands)

    Cristea, A.I.

    2004-01-01

    Invited editor's note. - Why should we look at the authoring process in adaptive educational hypermedia design? How does detecting authoring patterns help the process? Why do we need to consider cognitive styles in adaptive hypermedia? What do these seemingly unrelated topics have in common? These

  7. Adaptive Opportunistic Cooperative Control Mechanism Based on Combination Forecasting and Multilevel Sensing Technology of Sensors for Mobile Internet of Things

    Directory of Open Access Journals (Sweden)

    Yong Jin

    2014-01-01

    Full Text Available In mobile Internet of Things, there are many challenges, including sensing technology of sensors, how and when to join cooperative transmission, and how to select the cooperative sensors. To address these problems, we studied the combination forecasting based on the multilevel sensing technology of sensors, building upon which we proposed the adaptive opportunistic cooperative control mechanism based on the threshold values such as activity probability, distance, transmitting power, and number of relay sensors, in consideration of signal to noise ratio and outage probability. More importantly, the relay sensors would do self-test real time in order to judge whether to join the cooperative transmission, for maintaining the optimal cooperative transmission state with high performance. The mathematical analyses results show that the proposed adaptive opportunistic cooperative control approach could perform better in terms of throughput ratio, packet error rate and delay, and energy efficiency, compared with the direct transmission and opportunistic cooperative approaches.

  8. International Relations, New Technology, and Adaptation of the Military Innovation: Focusing on the Case of the Aircraft Carrier Innovation of the Imperial Japanese Navy During the Interwar Period

    Science.gov (United States)

    2017-12-01

    RELATIONS, NEW TECHNOLOGY , AND ADAPTATION OF THE MILITARY INNOVATION: FOCUSING ON THE CASE OF THE AIRCRAFT CARRIER INNOVATION OF THE IMPERIAL JAPANESE...Master’s thesis 4. TITLE AND SUBTITLE INTERNATIONAL RELATIONS, NEW TECHNOLOGY , AND ADAPTATION OF THE MILITARY INNOVATION: FOCUSING ON THE CASE OF THE...impacted the Japanese aircraft carrier and aircraft innovation during the interwar period. The study found that technology , international relations

  9. Network models for solving the problem of multicriterial adaptive optimization of investment projects control with several acceptable technologies

    Science.gov (United States)

    Shorikov, A. F.; Butsenko, E. V.

    2017-10-01

    This paper discusses the problem of multicriterial adaptive optimization the control of investment projects in the presence of several technologies. On the basis of network modeling proposed a new economic and mathematical model and a method for solving the problem of multicriterial adaptive optimization the control of investment projects in the presence of several technologies. Network economic and mathematical modeling allows you to determine the optimal time and calendar schedule for the implementation of the investment project and serves as an instrument to increase the economic potential and competitiveness of the enterprise. On a meaningful practical example, the processes of forming network models are shown, including the definition of the sequence of actions of a particular investment projecting process, the network-based work schedules are constructed. The calculation of the parameters of network models is carried out. Optimal (critical) paths have been formed and the optimal time for implementing the chosen technologies of the investment project has been calculated. It also shows the selection of the optimal technology from a set of possible technologies for project implementation, taking into account the time and cost of the work. The proposed model and method for solving the problem of managing investment projects can serve as a basis for the development, creation and application of appropriate computer information systems to support the adoption of managerial decisions by business people.

  10. Adapt or withdraw? Evidence on technological changes and early retirement using matched worker-firm data

    OpenAIRE

    Torbjørn Hægeland; Dag Rønningen; Kjell G. Salvanes

    2007-01-01

    Abstract: Older workers typically possess older vintages of skills than younger workers, and they may suffer more from technological change. Experienced workers may nevertheless have accumulated human capital making them suitable for adopting new technologies. On the other hand, to adjust to new technologies, workers must invest in training. This may not be worthwhile for the oldest workers, and technological change may thus induce early retirement. If technological change occu...

  11. Measuring the Impact of a Moving Target: Towards a Dynamic Framework for Evaluating Collaborative Adaptive Interactive Technologies

    OpenAIRE

    O?Grady, Laura; Witteman, Holly; Bender, Jacqueline L; Urowitz, Sara; Wiljer, David; Jadad, Alejandro R

    2009-01-01

    Background Website evaluation is a key issue for researchers, organizations, and others responsible for designing, maintaining, endorsing, approving, and/or assessing the use and impact of interventions designed to influence health and health services. Traditionally, these evaluations have included elements such as content credibility, interface usability, and overall design aesthetics. With the emergence of collaborative, adaptive, and interactive ("Web 2.0") technologies such as wikis and o...

  12. Using Spatial Information Technologies as Monitoring Devices in International Watershed Conservation along the Senegal River Basin of West Africa

    Directory of Open Access Journals (Sweden)

    Yaw A. Twumasi

    2008-12-01

    Full Text Available In this paper, we present the applications of spatial technologies—Geographic Information Systems (GIS and remote sensing—in the international monitoring of river basins particularly analyzing the ecological, hydrological, and socio-economic issues along the Senegal River. The literature on multinational water crisis has for decades focused on mediation aspects of trans-boundary watershed management resulting in limited emphasis placed on the application of advances in geo-spatial information technologies in multinational watershed conservation in the arid areas of the West African sub-region within the Senegal River Basin for decision-making and monitoring. While the basin offers life support in a complex ecosystem that stretches across different nations in a mostly desert region characterized by water scarcity and subsistence economies, there exists recurrent environmental stress induced by both socio-economic and physical factors. Part of the problems consists of flooding, drought and limited access to sufficient quantities of water. These remain particularly sensitive issues that are crucial for the health of a rapidly growing population and the economy. The problems are further compounded due to the threats of climate change and the resultant degradation of almost the region’s entire natural resources base. While the pace at which the institutional framework for managing the waters offers opportunities for hydro electricity and irrigated agriculture through the proliferation of dams, it has raised other serious concerns in the region. Even where data exists for confronting these issues, some of them are incompatible and dispersed among different agencies. This not only widens the geo-spatial data gaps, but it hinders the ability to monitor water problems along the basin. This study will fill that gap in research through mix scale methods built on descriptive statistics, GIS and remote sensing

  13. Using spatial information technologies as monitoring devices in international watershed conservation along the Senegal River Basin of West Africa.

    Science.gov (United States)

    Merem, Edmund C; Twumasi, Yaw A

    2008-12-01

    In this paper, we present the applications of spatial technologies-Geographic Information Systems (GIS) and remote sensing-in the international monitoring of river basins particularly analyzing the ecological, hydrological, and socio-economic issues along the Senegal River. The literature on multinational water crisis has for decades focused on mediation aspects of trans-boundary watershed management resulting in limited emphasis placed on the application of advances in geo-spatial information technologies in multinational watershed conservation in the arid areas of the West African sub-region within the Senegal River Basin for decision-making and monitoring. While the basin offers life support in a complex ecosystem that stretches across different nations in a mostly desert region characterized by water scarcity and subsistence economies, there exists recurrent environmental stress induced by both socio-economic and physical factors. Part of the problems consists of flooding, drought and limited access to sufficient quantities of water. These remain particularly sensitive issues that are crucial for the health of a rapidly growing population and the economy. The problems are further compounded due to the threats of climate change and the resultant degradation of almost the region's entire natural resources base. While the pace at which the institutional framework for managing the waters offers opportunities for hydro electricity and irrigated agriculture through the proliferation of dams, it has raised other serious concerns in the region. Even where data exists for confronting these issues, some of them are incompatible and dispersed among different agencies. This not only widens the geo-spatial data gaps, but it hinders the ability to monitor water problems along the basin. This study will fill that gap in research through mix scale methods built on descriptive statistics, GIS and remote sensing techniques by generating spatially referenced data to supplement

  14. Application of fluidic lens technology to an adaptive holographic optical element see-through autophoropter

    Science.gov (United States)

    Chancy, Carl H.

    A device for performing an objective eye exam has been developed to automatically determine ophthalmic prescriptions. The closed loop fluidic auto-phoropter has been designed, modeled, fabricated and tested for the automatic measurement and correction of a patient's prescriptions. The adaptive phoropter is designed through the combination of a spherical-powered fluidic lens and two cylindrical fluidic lenses that are orientated 45o relative to each other. In addition, the system incorporates Shack-Hartmann wavefront sensing technology to identify the eye's wavefront error and corresponding prescription. Using the wavefront error information, the fluidic auto-phoropter nulls the eye's lower order wavefront error by applying the appropriate volumes to the fluidic lenses. The combination of the Shack-Hartmann wavefront sensor the fluidic auto-phoropter allows for the identification and control of spherical refractive error, as well as cylinder error and axis; thus, creating a truly automated refractometer and corrective system. The fluidic auto-phoropter is capable of correcting defocus error ranging from -20D to 20D and astigmatism from -10D to 10D. The transmissive see-through design allows for the observation of natural scenes through the system at varying object planes with no additional imaging optics in the patient's line of sight. In this research, two generations of the fluidic auto-phoropter are designed and tested; the first generation uses traditional glass optics for the measurement channel. The second generation of the fluidic auto-phoropter takes advantage of the progress in the development of holographic optical elements (HOEs) to replace all the traditional glass optics. The addition of the HOEs has enabled the development of a more compact, inexpensive and easily reproducible system without compromising its performance. Additionally, the fluidic lenses were tested during a National Aeronautics Space Administration (NASA) parabolic flight campaign, to

  15. A systematic review and meta-analysis of Harmonic technology compared with conventional techniques in mastectomy and breast-conserving surgery with lymphadenectomy for breast cancer

    OpenAIRE

    Clymer, Jeffrey; Cheng,Hang; Ferko,Nicole; Patel,Leena; Soleas,Ireena M; Cameron,Chris G; Hinoul,Piet

    2016-01-01

    Hang Cheng,1 Jeffrey W Clymer,1 Nicole C Ferko,2 Leena Patel,2 Ireena M Soleas,2 Chris G Cameron,2 Piet Hinoul1 1Ethicon Inc., Cincinnati, OH, USA; 2Cornerstone Research Group, Burlington, ON, Canada Background: Mastectomy and breast-conserving surgery (BCS) are important treatment options for breast cancer patients. A previous meta-analysis demonstrated that the risk of certain complications can be reduced with the Harmonic technology compared with conventional methods in mastectomy. However...

  16. Advancing adaptive optics technology: Laboratory turbulence simulation and optimization of laser guide stars

    Science.gov (United States)

    Rampy, Rachel A.

    Since Galileo's first telescope some 400 years ago, astronomers have been building ever-larger instruments. Yet only within the last two decades has it become possible to realize the potential angular resolutions of large ground-based telescopes, by using adaptive optics (AO) technology to counter the blurring effects of Earth's atmosphere. And only within the past decade have the development of laser guide stars (LGS) extended AO capabilities to observe science targets nearly anywhere in the sky. Improving turbulence simulation strategies and LGS are the two main topics of my research. In the first part of this thesis, I report on the development of a technique for manufacturing phase plates for simulating atmospheric turbulence in the laboratory. The process involves strategic application of clear acrylic paint onto a transparent substrate. Results of interferometric characterization of the plates are described and compared to Kolmogorov statistics. The range of r0 (Fried's parameter) achieved thus far is 0.2--1.2 mm at 650 nm measurement wavelength, with a Kolmogorov power law. These plates proved valuable at the Laboratory for Adaptive Optics at University of California, Santa Cruz, where they have been used in the Multi-Conjugate Adaptive Optics testbed, during integration and testing of the Gemini Planet Imager, and as part of the calibration system of the on-sky AO testbed named ViLLaGEs (Visible Light Laser Guidestar Experiments). I present a comparison of measurements taken by ViLLaGEs of the power spectrum of a plate and the real sky turbulence. The plate is demonstrated to follow Kolmogorov theory well, while the sky power spectrum does so in a third of the data. This method of fabricating phase plates has been established as an effective and low-cost means of creating simulated turbulence. Due to the demand for such devices, they are now being distributed to other members of the AO community. The second topic of this thesis pertains to understanding and

  17. Study on a low complexity adaptive modulation algorithm in OFDM-ROF system with sub-carrier grouping technology

    Science.gov (United States)

    Liu, Chong-xin; Liu, Bo; Zhang, Li-jia; Xin, Xiang-jun; Tian, Qing-hua; Tian, Feng; Wang, Yong-jun; Rao, Lan; Mao, Yaya; Li, Deng-ao

    2018-01-01

    During the last decade, the orthogonal frequency division multiplexing radio-over-fiber (OFDM-ROF) system with adaptive modulation technology is of great interest due to its capability of raising the spectral efficiency dramatically, reducing the effects of fiber link or wireless channel, and improving the communication quality. In this study, according to theoretical analysis of nonlinear distortion and frequency selective fading on the transmitted signal, a low-complexity adaptive modulation algorithm is proposed in combination with sub-carrier grouping technology. This algorithm achieves the optimal performance of the system by calculating the average combined signal-to-noise ratio of each group and dynamically adjusting the origination modulation format according to the preset threshold and user's requirements. At the same time, this algorithm takes the sub-carrier group as the smallest unit in the initial bit allocation and the subsequent bit adjustment. So, the algorithm complexity is only 1 /M (M is the number of sub-carriers in each group) of Fischer algorithm, which is much smaller than many classic adaptive modulation algorithms, such as Hughes-Hartogs algorithm, Chow algorithm, and is in line with the development direction of green and high speed communication. Simulation results show that the performance of OFDM-ROF system with the improved algorithm is much better than those without adaptive modulation, and the BER of the former achieves 10e1 to 10e2 times lower than the latter when SNR values gets larger. We can obtain that this low complexity adaptive modulation algorithm is extremely useful for the OFDM-ROF system.

  18. High-pitch metal-on-glass technology for pad pitch adaptation between detectors and readout electronics

    CERN Document Server

    Ullán, Miguel; Campabadal, Francesca; Fleta, Celeste; Garcia, Carmen; Gonzalez, Francisco; Bernabeu, Jose

    2004-01-01

    Modern high-energy physics and astrophysics strip detectors have increased channel density to levels at which their connection with readout electronics has become very complex due to high pad pitch. Also, direct wire bonding is prevented by the fact that typically detector's pad pitch and electronics' pad pitch do not match. A high- pitch metal-on-glass technology is presented, that allows pad pitch adaptation between detectors and readout electronics. It consists of high-density metal lines on top of an insulating glass substrate. A photoresist layer is deposited covering the metal tracks for passivation and protection The technology is tested for conductivity, bondability, bonding pull force, peel off, and radiation hardness, and it is an established technology in the clean room of the CNM Institute in Barcelona. This technology has been chosen by the ATLAS Collaboration for the pad pitch adapters (PPA) of the SCT Endcap Modules, by a Compton camera project, and by other HEP groups for interconnection betwe...

  19. Using Remote Sensing Technology on the Delimitation of the Conservation Area for the Jianan Irrigation System Cultural Landsccape

    Directory of Open Access Journals (Sweden)

    C. H. Wang

    2015-08-01

    Full Text Available In recent years the cultural landscape has become an important issue for cultural heritages throughout the world. It represents the "combined works of nature and of man" designated in Article 1 of the World Heritage Convention. When a landscape has a cultural heritage value, important features should be marked and mapped through the delimitation of a conservation area, which may be essential for further conservation work. However, a cultural landscape’s spatial area is usually wider than the ordinary architectural type of cultural heritage, since various elements and impact factors, forming the cultural landscape’s character, lie within a wide geographic area. It is argued that the conservation of a cultural landscape may be influenced by the delimitation of the conservation area, the corresponding land management measures, the limits and encouragements. The Jianan Irrigation System, an historical cultural landscape in southern Taiwan, was registered as a living cultural heritage site in 2009. However, the system’s conservation should not be limited to just only the reservoir or canals, but expanded to irrigated areas where farmland may be the most relevant. Through the analysis process, only approximately 42,000 hectares was defined as a conservation area, but closely related to agricultural plantations and irrigated by the system. This is only half of the 1977 irrigated area due to urban sprawl and continuous industrial expansion.

  20. Using Remote Sensing Technology on the Delimitation of the Conservation Area for the Jianan Irrigation System Cultural Landsccape

    Science.gov (United States)

    Wang, C. H.

    2015-08-01

    In recent years the cultural landscape has become an important issue for cultural heritages throughout the world. It represents the "combined works of nature and of man" designated in Article 1 of the World Heritage Convention. When a landscape has a cultural heritage value, important features should be marked and mapped through the delimitation of a conservation area, which may be essential for further conservation work. However, a cultural landscape's spatial area is usually wider than the ordinary architectural type of cultural heritage, since various elements and impact factors, forming the cultural landscape's character, lie within a wide geographic area. It is argued that the conservation of a cultural landscape may be influenced by the delimitation of the conservation area, the corresponding land management measures, the limits and encouragements. The Jianan Irrigation System, an historical cultural landscape in southern Taiwan, was registered as a living cultural heritage site in 2009. However, the system's conservation should not be limited to just only the reservoir or canals, but expanded to irrigated areas where farmland may be the most relevant. Through the analysis process, only approximately 42,000 hectares was defined as a conservation area, but closely related to agricultural plantations and irrigated by the system. This is only half of the 1977 irrigated area due to urban sprawl and continuous industrial expansion.

  1. On-farm conservation of Zaer lentil genetic resources

    Directory of Open Access Journals (Sweden)

    N. Benbrahim

    2018-01-01

    Full Text Available Zaer lentil has been on-farm conserved thanks to farmers’ knowledges and practices add to its genetic diversity. Its notoriety is related to its specific adaptation and organoleptic traits. The main objective of this study is to identify farmers’ practices that have allowed a dynamic adaptation potential and an add value on quality product. It was based on (1 farmers’ survey on seed management system, (2 Zaer lentil genetic diversity analysis using agro-morphological traits and (3 technological and nutritional analysis. The results show that the on-farm conservation of Zaer lentil is linked to its specific adaptation related to seed production and seed exchange system, to its genetic diversity (21.7% conservation.

  2. Fiscal 1999 technical survey report. Survey of energy conservation technologies in Japan; 1999 nendo kokunai no sho energy gijutsu ni kansuru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    NEDO (New Energy and Industrial Technology Development Organization), in its effort to implement a joint project with importing countries, endeavors to popularize energy conservation technologies by introducing them into plants in the importing countries and by demonstrating their validity on real systems. Energy conservation technologies in use in Japan's steelmaking, cement making, chemical, and oil refining industries were reassessed in view of their usefulness in the above-said project. During the reassessment, they were analyzed also for cost effectiveness for the scales on which they would possibly be introduced. Ninety-four technologies were reassessed, which involved the top pressure recovery facilities, continuous casting facilities, high frequency melting furnace, and high efficiency sintering furnace ignition device, these for the steelmaking industry; the materials crushing vertical roller mill, NSP (new suspension preheater) type cement calcination kiln, finishing process preliminary crusher, urban wastes conversion into materials for cement making or into fuel, these for the cement making industry; the multi-effect evaporator for an ammonia manufacturing process and the device for collecting waste heat at the outlet of a synthetic gas compressor, these for the chemical industry; and reduction in the amount of injection steam by use of vacuum distillation tower top steam recycling, etc., these in relation with oil refining facilities. (NEDO)

  3. Measurement of the functional impact of adaptive seating technology in children with cerebral palsy

    NARCIS (Netherlands)

    Ryan, S.E.

    2009-01-01

    Many young children with cerebral palsy have motor impairments that affect their ability to sit and do activities unsupported. They often rely on special adaptive seating devices for postural control and stability. Healthcare practitioners generally accept that these products improve functioning in

  4. Innovative and adaptive technologies in decommissioning of nuclear facilities. Final report of a coordinated research project 2004-2008

    International Nuclear Information System (INIS)

    2008-10-01

    There are dozens of old reactors and other nuclear facilities worldwide that are either being actively dismantled or are candidates for decommissioning in the near term. A significant proportion of these facilities are situated in Member States or institutions that do not have adequate expertise and technologies for planning and implementing state of the art decommissioning projects. The technology selection process is critical in that regard. The main objective of the IAEA technical activities on decommissioning is to promote the exchange of lessons learned in order to improve the technologies, thereby contributing to successful planning and implementation of decommissioning. This should be achieved through a better understanding of the decision making process in technology comparison and selection and relevant issues affecting the entire decommissioning process. The specific objectives of the Coordinated Research Project (CRP) on Innovative and Adaptive Technologies in Decommissioning of Nuclear Facilities include the following general aspects: (a) To establish methodologies and data needs for developing concepts and approaches relevant to technology comparison and selection in decommissioning; (b) To improve and expand the database on applications and performance of various types of decommissioning technologies; (c) To address specific issues for individual decommissioning technologies and generate data relevant to their comparison and selection. It is also expected that this project, and in particular the papers collected in this TECDOC, will draw Member States' attention to the practicality and achievability of timely planning and implementation of decommissioning, especially for many smaller projects. Concluding reports that summarized the work undertaken under the aegis of the CRP were presented at the third and final research coordination meeting held in Rez, Czech Republic, 3-7 December 2007, and collected in this technical publication. Operating

  5. Evaluating and prioritizing technologies for adaptation to climate change. A hands on guidance to multi criteria analysis (MCA) and the identification and assessment of related criteria

    DEFF Research Database (Denmark)

    Trærup, Sara Lærke Meltofte; Bakkegaard, Riyong Kim

    The objective of this guidance is to guide consultants, decision makers and technical experts on how to facilitate discussions for prioritizing adaptation technologies, and to support the stakeholders in identifying appropriate criteria for this analysis.......The objective of this guidance is to guide consultants, decision makers and technical experts on how to facilitate discussions for prioritizing adaptation technologies, and to support the stakeholders in identifying appropriate criteria for this analysis....

  6. Mitigation and Adaptation: Critical Perspectives toward Digital Technologies in Place-Conscious Environmental Education

    Science.gov (United States)

    Greenwood, David A.; Hougham, R. Justin

    2015-01-01

    This paper explores the tension for educators between the proliferation of mobile, digital technologies, and the widely held belief that environmental learning is best nurtured through place-based approaches that emphasize direct experience. We begin by offering a general critique of technology in culture and education, emphasizing what is at…

  7. Cognitive and sociocultural aspects of robotized technology: innovative processes of adaptation

    Science.gov (United States)

    Kvesko, S. B.; Kvesko, B. B.; Kornienko, M. A.; Nikitina, Y. A.; Pankova, N. M.

    2018-05-01

    The paper dwells upon interaction between socio-cultural phenomena and cognitive characteristics of robotized technology. The interdisciplinary approach was employed in order to cast light on the manifold and multilevel identity of scientific advance in terms of robotized technology within the mental realm. Analyzing robotized technology from the viewpoint of its significance for the modern society is one of the upcoming trends in the contemporary scientific realm. The robots under production are capable of interacting with people; this results in a growing necessity for the studies on social status of robotized technological items. Socio-cultural aspect of cognitive robotized technology is reflected in the fact that the nature becomes ‘aware’ of itself via human brain, a human being tends to strives for perfection in their intellectual and moral dimensions.

  8. Conserving marine biodiversity: insights from life-history trait candidate genes in Atlantic cod (Gadus morhua)

    DEFF Research Database (Denmark)

    Hansen, Jakob Hemmer; Therkildsen, Nina Overgaard; Meldrup, Dorte

    2014-01-01

    Recent technological developments have facilitated an increased focus on identifying genomic regions underlying adaptive trait variation in natural populations, and it has been advocated that this information should be important for designating population units for conservation. In marine fishes...... are under selection in natural populations of Atlantic cod. Furthermore, we find that patterns of variation in outlier markers do not align with those observed at selectively neutral markers, and that outlier markers identify conservation units on finer geographical scales than those revealed when analysing...... only neutral markers. Accordingly, results also suggest that information about adaptive genetic variation will be useful for targeted conservation and management in this and other marine species...

  9. Programmable Ultra Lightweight System Adaptable Radio (PULSAR) Low Cost Telemetry - Access from Space Advanced Technologies or Down the Middle

    Science.gov (United States)

    Sims. Herb; Varnavas, Kosta; Eberly, Eric

    2013-01-01

    Software Defined Radio (SDR) technology has been proven in the commercial sector since the early 1990's. Today's rapid advancement in mobile telephone reliability and power management capabilities exemplifies the effectiveness of the SDR technology for the modern communications market. In contrast, presently qualified satellite transponder applications were developed during the early 1960's space program. Programmable Ultra Lightweight System Adaptable Radio (PULSAR, NASA-MSFC SDR) technology revolutionizes satellite transponder technology by increasing data through-put capability by, at least, an order of magnitude. PULSAR leverages existing Marshall Space Flight Center SDR designs and commercially enhanced capabilities to provide a path to a radiation tolerant SDR transponder. These innovations will (1) reduce the cost of NASA Low Earth Orbit (LEO) and Deep Space transponders, (2) decrease power requirements, and (3) a commensurate volume reduction. Also, PULSAR increases flexibility to implement multiple transponder types by utilizing the same hardware with altered logic - no analog hardware change is required - all of which can be accomplished in orbit. This provides high capability, low cost, transponders to programs of all sizes. The final project outcome would be the introduction of a Technology Readiness Level (TRL) 7 low-cost CubeSat to SmallSat telemetry system into the NASA Portfolio.

  10. Resurrection of glyphosate resistant palmer amaranth control in conservation tillage dicamba tolerant cotton; soil health salvation using herbicide technology

    Science.gov (United States)

    Conservation agriculture hecterage in the mid-south and southeastern US has decreased because of herbicide resistant and other hard to control weeds. Producers have increasingly utilized tillage, the majority either using a moldboard plow to deeply bury weed seed and decrease emergence, or ‘vertica...

  11. Application of adaptive fuzzy control technology to pressure control of a pressurizer

    Institute of Scientific and Technical Information of China (English)

    YANG Ben-kun; BIAN Xin-qian; GUO Wei-lai

    2005-01-01

    A pressurizer is one of important equipment in a pressurized water reactor plant. It is used to maintain the pressure of primary coolant within allowed range because the sharp change of coolant pressure affects the security of reactor,therefor,the study of pressurizer's pressure control methods is very important. In this paper, an adaptive fuzzy controller is presented for pressure control of a pressurizer in a nuclear power plant. The controller can on-line tune fuzzy control rules and parameters by self-learning in the actual control process, which possesses the way of thinking like human to make a decision. The simulation results for a pressurized water reactor plant show that the adaptive fuzzy controller has optimum and intelligent characteristics, which prove the controller is effective.

  12. Enhancing HumanAgent Teaming with Individualized, Adaptive Technologies: A Discussion of Critical Scientific Questions

    Science.gov (United States)

    2018-05-04

    reliability of information available is often unknown. What mechanisms must be in place to account for and adapt to the fluid nature of information ...reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching...existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection information . Send comments regarding

  13. Adapted Technology for Small-scale Manufacture of Caerphilly-Type ...

    African Journals Online (AJOL)

    Journal of Food Technology in Africa. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 5, No 4 (2000) >. Log in or Register to get access to full text downloads.

  14. A methodology for the valuation and selection of adaptable technology portfolios and its application to small and medium airports

    Science.gov (United States)

    Pinon, Olivia J.

    The increase in the types of airspace users (large aircraft, small and regional jets, very light jets, unmanned aerial vehicles, etc.), as well as the very limited number of future new airport development projects are some of the factors that will characterize the next decades in air transportation. These factors, associated with a persistent growth in air traffic will worsen the current gridlock situation experienced at some major airports. As airports are becoming the major capacity bottleneck to continued growth in air traffic, it is therefore primordial to make the most efficient use of the current, and very often, underutilized airport infrastructure. This research thus proposes to address the increase in air traffic demand and resulting capacity issues by considering the implementation of operational concepts and technologies at underutilized airports. However, there are many challenges associated with sustaining the development of this type of airports. First, the need to synchronize evolving technologies with airports’ needs and investment capabilities is paramount. Additionally, it was observed that the evolution of secondary airports, and their needs, is tightly linked to the environment in which they operate. In particular, sensitivity of airports to changes in the dynamics of their environment is important, therefore requiring that the factors that drive the need for technology acquisition be identified and characterized. Finally, the difficulty to evaluate risk and make financially viable decisions, particularly when investing in new technologies, cannot be ignored. This research provides a methodology that addresses these challenges and ensures the sustainability of airport capacity-enhancement investments in a continuously changing environment. In particular, it is articulated around the need to provide decision makers with the capability to valuate and select adaptable technology portfolios to ensure airport financial viability. Hence, the four

  15. Online Dynamic Balance Technology for High Speed Spindle Based on Gain Parameter Adaption and Scheduling Control

    Directory of Open Access Journals (Sweden)

    Shihai Zhang

    2018-06-01

    Full Text Available Unbalance vibration is one of the main vibration forms of a high speed machine tool spindle. The overlarge unbalance vibration will have some adverse effects on the working life of the spindle system and the surface quality of the work-piece. In order to reduce the unbalance of a high speed spindle system, a pneumatic online dynamic balance device and its control system are presented in the paper. To improve the balance accuracy and adaptation of the balance system, the gain parameter adaption and scheduling control method are proposed first, and then the different balance effects of the influence coefficient method and the gain scheduling control method are compared through many dynamic balance experiments of the high speed spindle. The experimental results indicate that the gain parameters can be changed timely according to the transformation of the speed and kinetic parameters of the spindle system. The balance accuracy can be improved for a high speed spindle with time-varying characteristics, based on the adaptive gain scheduling control method.

  16. Evaluation of an Adaptive Learning Technology in a First-year Extended Curriculum Programme Physics course

    Directory of Open Access Journals (Sweden)

    Moses Mushe Basitere

    2017-12-01

    Full Text Available Personalised, adaptive online learning platforms that form part of web-based proficiency tests play a major role in the improvement of the quality of learning in physics and assist learners in building proficiency, preparing for tests and using their time more effectively. In this study, the effectiveness of an adaptive learning platform, Wiley Plus ORION, was evaluated using proficiency test scores compared to paper-based test scores in a first-year introductory engineering physics course. Learners’ performance activities on the adaptive learning platform as well as their performance on the proficiency tests and their impact on the paper-based midterm averaged test were investigated using both qualitative and quantitative methods of data collection. A comparison between learners’ performance on the proficiency tests and a paper-based midterm test was done to evaluate whether there was a correlation between their performance on the proficiency tests and the midterm test. Focus group interviews were carried out with three categories of learners to elicit their experiences. Results showed that there was a positive relationship between high-performing learners’ proficiency score in the midterm averaged test and that the proficiency test enhanced learners’ performance in the paper-based midterm averaged test.

  17. Adaptation of the Biolog Phenotype MicroArrayTM Technology to Profile the Obligate Anaerobe Geobacter metallireducens

    Energy Technology Data Exchange (ETDEWEB)

    Joyner, Dominique; Fortney, Julian; Chakraborty, Romy; Hazen, Terry

    2010-05-17

    The Biolog OmniLog? Phenotype MicroArray (PM) plate technology was successfully adapted to generate a select phenotypic profile of the strict anaerobe Geobacter metallireducens (G.m.). The profile generated for G.m. provides insight into the chemical sensitivity of the organism as well as some of its metabolic capabilities when grown with a basal medium containing acetate and Fe(III). The PM technology was developed for aerobic organisms. The reduction of a tetrazolium dye by the test organism represents metabolic activity on the array which is detected and measured by the OmniLog(R) system. We have previously adapted the technology for the anaerobic sulfate reducing bacterium Desulfovibrio vulgaris. In this work, we have taken the technology a step further by adapting it for the iron reducing obligate anaerobe Geobacter metallireducens. In an osmotic stress microarray it was determined that the organism has higher sensitivity to impermeable solutes 3-6percent KCl and 2-5percent NaNO3 that result in osmotic stress by osmosis to the cell than to permeable non-ionic solutes represented by 5-20percent ethylene glycol and 2-3percent urea. The osmotic stress microarray also includes an array of osmoprotectants and precursor molecules that were screened to identify substrates that would provide osmotic protection to NaCl stress. None of the substrates tested conferred resistance to elevated concentrations of salt. Verification studies in which G.m. was grown in defined medium amended with 100mM NaCl (MIC) and the common osmoprotectants betaine, glycine and proline supported the PM findings. Further verification was done by analysis of transcriptomic profiles of G.m. grown under 100mM NaCl stress that revealed up-regulation of genes related to degradation rather than accumulation of the above-mentioned osmoprotectants. The phenotypic profile, supported by additional analysis indicates that the accumulation of these osmoprotectants as a response to salt stress does not

  18. FY 2000 report on the survey of energy conservation technology in Japan; 2000 nendo chosa hokoku. Nihon kokunai no sho energy gijutsu ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the purpose of supporting self-help efforts to deal with energy environmental problems in developing countries in the Asian region, etc. and making the transfer of the energy conservation technology and petroleum substituting energy technology that are at a practical stage and are owned by Japan, evaluation of each technology was conducted in terms mainly of applicability for a model project. The existing survey data were supplemented/deleted. As the model project supposing the application to developing countries in Asia, types of industry for survey were selected as follows: iron/steel, nonferrous metal, chemical industry, oil refining, ceramics/earthware, paper/pulp, foodstuffs, textile/spinning, electricity (power generation)/gas, technologies common to all industry types. Technologies for survey were energy saving production facilities and energy saving equipment at plant with a regular scale to which the applicability as the model project was supposed. The energy saving effect was all calculated in TOE, and the method to calculate the effect was also described. The paper further described possibilities of introduction/spread of the said technologies to developing countries in Asia, introduction limitation/preconditions, cost vs. effect, etc. (NEDO)

  19. Chaos control of the micro-electro-mechanical resonator by using adaptive dynamic surface technology with extended state observer

    International Nuclear Information System (INIS)

    Luo, Shaohua; Sun, Quanping; Cheng, Wei

    2016-01-01

    This paper addresses chaos control of the micro-electro- mechanical resonator by using adaptive dynamic surface technology with extended state observer. To reveal the mechanism of the micro- electro-mechanical resonator, the phase diagrams and corresponding time histories are given to research the nonlinear dynamics and chaotic behavior, and Homoclinic and heteroclinic chaos which relate closely with the appearance of chaos are presented based on the potential function. To eliminate the effect of chaos, an adaptive dynamic surface control scheme with extended state observer is designed to convert random motion into regular motion without precise system model parameters and measured variables. Putting tracking differentiator into chaos controller solves the ‘explosion of complexity’ of backstepping and poor precision of the first-order filters. Meanwhile, to obtain high performance, a neural network with adaptive law is employed to approximate unknown nonlinear function in the process of controller design. The boundedness of all the signals of the closed-loop system is proved in theoretical analysis. Finally, numerical simulations are executed and extensive results illustrate effectiveness and robustness of the proposed scheme.

  20. Cross-cultural adaptation of the psychosocial impact of assistive device scale (PIADS) for Puerto Rican assistive technology users.

    Science.gov (United States)

    Orellano, Elsa M; Jutai, Jeffrey W

    2013-01-01

    Assistive technology (AT) is important for individuals with disabilities' independence and participation in daily life, and there is a lack of valid AT outcome tools for the Puerto Rican population. This pilot study examined the content validity of a new adaptation of the Psychosocial Impact of Assistive Device Scale (PIADS): the Puerto Rican-Spanish PIADS (PR-PIADS). Following standard procedures, the cultural adaptation methodology included a bilingual multidisciplinary committee review of the original (English language) and Spanish versions of the PIADS and pilot testing of the preliminary version of the PR-PIADS with 20 AT users. The committee recommended a total of 58 semantic and conceptual modifications of the Spanish PIADS. Pilot data analysis resulted in 4 additional semantic and conceptual modifications of items that did not reach the minimum content validity ratio of 0.42 for a panel composed by 20 members: competence (0), efficiency (-0.6), performance (-0.95), and eagerness to take chances (-0.6). This pilot study demonstrated evidence of initial content validity of the PR-PIADS. Future research is required before using this tool with greater confidence to address the construct validity and reliability that are also critical to a successful cultural adaptation.

  1. Resource Conservation Glossary.

    Science.gov (United States)

    Soil Conservation Society of America, Ankeny, IA.

    This glossary is a composite of terms selected from 13 technologies, and is the expanded revision of the original 1952 edition of "The Soil and Water Conservation Glossary." The terms were selected from these areas: agronomy, biology, conservation, ecology, economics, engineering, forestry, geology, hydrology, range, recreation, soils, and…

  2. Ethics of conservation triage

    Directory of Open Access Journals (Sweden)

    Kerrie A Wilson

    2016-09-01

    Full Text Available Conservation triage seems to be at a stalemate between those who accept triage based on utilitarian rationalization, and those that reject it based on a number of ethical principles. We argue that without considered attention to the ethics of conservation triage we risk further polarization in the field of conservation. We draw lessons from the medical sector, where triage is more intuitive and acceptable, and also from disaster planning, to help navigate the challenges that triage entails for conservation science, practice, and policy. We clarify the consequentialist, deontological, and virtue ethical stances that influence the level of acceptance of triage. We emphasize the ethical dimensions of conservation triage in principle and in practice, particularly in the context of stakeholder diversity, a wide range of possible objectives and actions, broader institutions, and significant uncertainties. A focus on a more diverse set of ethics, more considered choice of triage as a conservation tool, open communication of triage objectives and protocols, greater consideration of risk preferences, and regular review and adaptation of triage protocols is required for conservation triage to become more acceptable among diverse conservation practitioners, institutions, and the general public. Accepting conservation triage as fundamentally an ethical problem would foster more open dialogue and constructive debate about the role of conservation triage in a wider system of care.

  3. SLICEIT and TAHMO Partnerships: Students Local and International Collaboration for Climate and Environmental Monitoring, Technology Development, Education, Adaptation and Mitigation

    Science.gov (United States)

    Aishlin, P. S.; Selker, J. S.

    2015-12-01

    Climate change understanding and impacts vary by community, yet the global nature of climate change requires international collaboration to address education, monitoring, adaptation and mitigation needs. We propose that effective climate change monitoring and education can be accomplished via student-led local and international community partnerships. By empowering students as community leaders in climate-environmental monitoring and education, as well as exploration of adaptation/mitigation needs, well-informed communities and young leadership are developed to support climate change science moving forward. Piloted 2013-2015, the SLICEIT1 program partnered with TAHMO2 to connect student leaders in North America, Europe and Africa. At the international level, schools in the U.S.A and Netherlands were partnered with schools in Ghana, Kenya, and Uganda for science and cultural exchange. Each school was equipped with a climate or other environmental sensing system, real-time data publication and curricula for both formal and informal science, technology, engineering and math education and skill development. African counterparts in TAHMO's School-2-School program collect critically important data for enhanced on-the-ground monitoring of weather conditions in data-scarce regions of Africa. In Idaho, student designed, constructed and installed weather stations provide real time data for classroom and community use. Student-designed formal educational activities are disseminated to project partners, increasing hands-on technology education and peer-based learning. At the local level, schools are partnered with a local agency, research institute, nonprofit organization, industry and/or community partner that supplies a climate science expert mentor to SLICEIT program leaders and teachers. Mentor engagement is facilitated and secured by program components that directly benefit the mentor's organization and local community via climate/environment monitoring, student workforce

  4. The New Digital [St]age: Barriers to the Adoption and Adaptation of New Technologies to Deliver Extension Programming and How to Address Them

    Science.gov (United States)

    Seger, Jamie

    2011-01-01

    With the rise of social media and the need for statewide program cohesiveness, The Ohio State University Extension has the opportunity to position itself as a catalyst for technology adoption and adaptation nationwide. Unfortunately, many barriers exist to the successful use and implementation of technology, including an organizational structure…

  5. In vitro conservation and sustained production of breadfruit ( Artocarpus altilis, Moraceae): modern technologies for a traditional tropical crop

    Science.gov (United States)

    Murch, Susan J.; Ragone, Diane; Shi, Wendy Lei; Alan, Ali R.; Saxena, Praveen K.

    2008-02-01

    Breadfruit ( Artocarpus altilis, Moraceae) is a traditionally cultivated, high-energy, high-yield crop, but widespread use of the plant for food is limited by poor quality and poor storage properties of the fruit. A unique field genebank of breadfruit species and cultivars exists at the National Tropical Botanical Garden in the Hawaiian Islands and is an important global resource for conservation and sustainable use of breadfruit. However, this plant collection could be damaged by a random natural disaster such as a hurricane. We have developed a highly efficient in vitro plant propagation system to maintain, conserve, mass propagate, and distribute elite varieties of this important tree species. Mature axillary shoot buds were collected from three different cultivars of breadfruit and proliferated using a cytokinin-supplemented medium. The multiple shoots were maintained as stock cultures and repeatedly used to develop whole plants after root differentiation on a basal or an auxin-containing medium. The plantlets were successfully grown under greenhouse conditions and were reused to initiate additional shoot cultures for sustained production of plants. Flow cytometry was used to determine the nuclear deoxyribonucleic acid content and the ploidy status of the in vitro grown population. The efficacy of the micropropagation protocols developed in this study represents a significant advancement in the conservation and sustained mass propagation of breadfruit germplasm in a controlled environment free from contamination.

  6. Soil and Water Conservation Prioritization Using Geospatial Technology – a Case Study of Part of Subarnarekha Basin, Jharkhand, India

    Directory of Open Access Journals (Sweden)

    Firoz Ahmad

    2017-08-01

    Full Text Available Changing patterns of land use and land cover have exploited the natural resources. Soil, water and forests are degraded, both quantitatively and qualitatively. Deforestation in recent years has led to changes in the environment and more of soil erosion and loss of potable water. In order to conserve and sustainably use soil and water, a watershed management approach is necessary. It helps in restoring water by increasing the infiltration and reducing the erosion of soil. Such measures should be propagated in rainfall deficit areas. The present study has attempted to study the upper watershed part of Subarnarekha basin in Jharkhand state of India. Remote sensing satellite data (Landsat 8 OLI/TIRS 2013 was used for delineation of the land use/land cover and vegetation index maps. Several thematic layers like slope, drainage and rainfall were integrated to achieve a priority area map using spatial multicriteria decision making. It delineated high medium and low priority areas within the watershed for soil and water conservation. The high priority area was 16.63% of the total study area. Further, the causes were analysed and conservation measures proposed.

  7. Adaptive interaction a utility maximization approach to understanding human interaction with technology

    CERN Document Server

    Payne, Stephen J

    2013-01-01

    This lecture describes a theoretical framework for the behavioural sciences that holds high promise for theory-driven research and design in Human-Computer Interaction. The framework is designed to tackle the adaptive, ecological, and bounded nature of human behaviour. It is designed to help scientists and practitioners reason about why people choose to behave as they do and to explain which strategies people choose in response to utility, ecology, and cognitive information processing mechanisms. A key idea is that people choose strategies so as to maximise utility given constraints. The frame

  8. Adapting for uncertainty : a scenario analysis of U.S. technology energy futures

    International Nuclear Information System (INIS)

    Laitner, J.A.; Hanson, D.A.; Mintzner, I.; Leonard, J.A.

    2006-01-01

    The pattern of future evolution for United States (US) energy markets is highly uncertain at this time. This article provided details of a study using a scenario analysis technique to investigate key energy issues affecting decision-making processes in the United States. Four scenarios were used to examine the driving forces and critical uncertainties that may shape United States energy markets and the economy for the next 50 years: (1) a reference scenario benchmarked to the 2002 annual energy outlook forecast, (2) abundant and inexpensive supplies of oil and gas, (3) a chaotic future beset with international conflict, faltering new technologies, environmental policy difficulties and slowed economic growth, and (4) a technology-driven market in which a variety of forces converge to reshape the energy sector. Each of the scenarios was quantified using a computable general equilibrium model known as the All Modular Industry Growth Assessment (AMIGA) model. Results suggested that the range of different outcomes for the US is broad. However, energy use is expected to increase in all 4 scenarios. It was observed that the introduction of policies to encourage capital stock turnover and accelerate the commercialization of high efficiency, low-emissions technologies may reduce future primary energy demand. The analysis also showed that lower energy prices may lead to higher economic growth. Policies introduced to improve energy efficiency and accelerate the introduction of new technologies did not appreciably reduce the prospects for economic growth. Results also suggested that lower fossil fuel prices discourage investments in energy efficiency or new technologies and may mask the task of responding to future surprises. It was concluded that an investment path that emphasizes both energy efficiency improvements and advanced energy supply technologies will provide economic growth conditions similar to the implementation of lower energy prices. 11 refs., 1 tab., 2 figs

  9. Development of Micro Air Vehicle Technology With In-Flight Adaptive-Wing Structure

    Science.gov (United States)

    Waszak, Martin R. (Technical Monitor); Shkarayev, Sergey; Null, William; Wagner, Matthew

    2004-01-01

    This is a final report on the research studies, "Development of Micro Air Vehicle Technology with In-Flight Adaptrive-Wing Structure". This project involved the development of variable-camber technology to achieve efficient design of micro air vehicles. Specifically, it focused on the following topics: 1) Low Reynolds number wind tunnel testing of cambered-plate wings. 2) Theoretical performance analysis of micro air vehicles. 3) Design of a variable-camber MAV actuated by micro servos. 4) Test flights of a variable-camber MAV.

  10. Applying Adaptive Swarm Intelligence Technology with Structuration in Web-Based Collaborative Learning

    Science.gov (United States)

    Huang, Yueh-Min; Liu, Chien-Hung

    2009-01-01

    One of the key challenges in the promotion of web-based learning is the development of effective collaborative learning environments. We posit that the structuration process strongly influences the effectiveness of technology used in web-based collaborative learning activities. In this paper, we propose an ant swarm collaborative learning (ASCL)…

  11. Adaptation of the Science, Technology, Engineering, and Mathematics Career Interest Survey (STEM-CIS) into Turkish

    Science.gov (United States)

    Koyunlu Unlu, Zeynep; Dokme, Ilbilge; Unlu, Veli

    2016-01-01

    Problem Statement: Science, technology, engineering, and mathematics (STEM) education has recently become a remarkable research topic, especially in developed countries as a result of the skilled workforce required in the fields of the STEM. Considering that professional tendencies are revealed at early ages, determining students' interest in STEM…

  12. Empowering Children with Adaptive Technology Skills: Careful Engagement in the Digital Information Age

    Science.gov (United States)

    Huda, Miftachul; Jasmi, Kamarul Azmi; Mustari, Mohd Ismail; Basiron, Bushrah; Hehsan, Aminudin; Shahrill, Masitah; Gassama, Saikou Kawsu

    2017-01-01

    The technological advancement occurring in the world today has a potency to create positive and negative side effects especially on children. The positive side may entail increased empathy and acceptance of diversity through modelling the prosocial behaviours, while the negative can be manifest in aggressive behaviour, risky sexual behaviour, and…

  13. Adapting to Student Learning Styles: Engaging Students with Cell Phone Technology in Organic Chemistry Instruction

    Science.gov (United States)

    Pursell, David P.

    2009-01-01

    Students of organic chemistry traditionally make 3 x 5 in. flash cards to assist learning nomenclature, structures, and reactions. Advances in educational technology have enabled flash cards to be viewed on computers, offering an endless array of drilling and feedback for students. The current generation of students is less inclined to use…

  14. CDP - Adaptive Supervisory Control and Data Acquisition (SCADA) Technology for Infrastructure Protection

    Energy Technology Data Exchange (ETDEWEB)

    Marco Carvalho; Richard Ford

    2012-05-14

    Supervisory Control and Data Acquisition (SCADA) Systems are a type of Industrial Control System characterized by the centralized (or hierarchical) monitoring and control of geographically dispersed assets. SCADA systems combine acquisition and network components to provide data gathering, transmission, and visualization for centralized monitoring and control. However these integrated capabilities, especially when built over legacy systems and protocols, generally result in vulnerabilities that can be exploited by attackers, with potentially disastrous consequences. Our research project proposal was to investigate new approaches for secure and survivable SCADA systems. In particular, we were interested in the resilience and adaptability of large-scale mission-critical monitoring and control infrastructures. Our research proposal was divided in two main tasks. The first task was centered on the design and investigation of algorithms for survivable SCADA systems and a prototype framework demonstration. The second task was centered on the characterization and demonstration of the proposed approach in illustrative scenarios (simulated or emulated).

  15. Adapting to Student Learning Styles: Using Cell Phone Technology in Undergraduate Science Instruction

    Directory of Open Access Journals (Sweden)

    Richard Pennington

    2010-10-01

    Full Text Available Students of science traditionally make 3x5 flash cards to assist learning nomenclature, structures, and reactions. Advances in educational technology have enabled flashcards viewed on computers, offering an endless array of drilling and feedback opportunities for students. The current generation of students is less inclined to use computers, but they use their cell phones 24 hours a day. This report outlines these trends and an even more recent educational technology initiative, that of using cell phone flash cards to help students learn biology and chemistry nomenclature, structures, and reactions. Students responded positively to cell phone flash cards in a pilot study and a more detailed study is planned for the coming year.

  16. Measuring Habitat Quality for Deep-Sea Corals and Sponges to Add Conservation Value to Telepresence-Enabled Science and Technology

    Science.gov (United States)

    Etnoyer, P. J.; Hourigan, T. F.; Reser, B.; Monaco, M.

    2016-02-01

    The growing fleet of telepresence-enabled research vessels equipped with deep-sea imaging technology provides a new opportunity to catalyze and coordinate research efforts among ships. This development is particularly useful for studying the distribution and diversity of deep-sea corals, which occur worldwide from 50 to 8600 m depth. Marine managers around the world seek to conserve these habitats, but require a clear consensus on what types of information are most important and most relevant for marine conservation. The National Oceanic and Atmospheric Administration (NOAA) seeks to develop a reproducible, non-invasive set of ROV methods designed to measure conservation value, or habitat quality, for deep-sea corals and sponges. New tools and methods will be proposed to inform ocean resource management, as well as facilitate research, outreach, and education. A new database schema will be presented, building upon the Ocean Biogeographic Information System (OBIS) and efforts of submersible and ROV teams over the years. Visual information about corals and sponges has proven paramount, particularly high-quality images with standard attributes for marine geology and marine biology, including scientific names, colony size, health, abundance, and density. Improved habitat suitability models can be developed from these data if presence and absence are measured. Recent efforts to incorporate physical sampling into telepresence protocols further increase the value of such information. It is possible for systematic observations with small file sizes to be distributed as geo-referenced, time-stamped still images with environmental variables for water chemistry and a standardized habitat classification. The technique is common among researchers, but a distributed network for this information is still in its infancy. One goal of this presentation is to make progress towards a more integrated network of these measured observations of habitat quality to better facilitate

  17. Evaluation on Sustainability of Technological Dimension Biopore Absorption Hole Management for Soil Water Conservation in Semarang City

    Directory of Open Access Journals (Sweden)

    Elesvera Destry

    2015-01-01

    Full Text Available Biopore technology innovation is an easy and cheap technology that can be applied in any class of society. Biopore Absorption Hole (BAH is a cylincric vertical hole with a relatively small diameter. Eventhough the diameter is not so big, it is still effective to absorb groundwater.The dimension of technology reflected how this BAH tecnology is applied to the Management of BAH within the society of Semarang City.In order to achieve maximum results, an evaluation toward the sustainability of the dimension of BAH Management technology in Semarang City needs to be performed.The objectives of this research are to:1 studying the status of technology dimension in maintaining BAH, 2 studying sensitive attributes having influence toward index value and the sustainability status of technology dimension in maintaining BAH, as well as 3 formulating the priorities for policies applicable to technology in maintaining BAH in Semarang.The research took place in three administrative villages (Srondol Wetan, Jatingaleh, and Bendan Ngisor in the city of Semarang.Those three locations were chosen to represent upper, middle, and lower regions of Semarang as water absorption area.The analysis of status determining data and leveraging factor was conducted using RAP – biopore method, while the the making of policy priorities was performed by using Analitycal Hierarchy Process (AHP.Results suggest that the status of the sustainability of Semarang’s BAH Management technology dimension was on “less sustainable” status (25,01 – 50,00. The strategy of enhancing influential sensitive attributes to improve sustainability status was a great success in affecting the values and sustainability status.

  18. A systematic review and meta-analysis of Harmonic technology compared with conventional techniques in mastectomy and breast-conserving surgery with lymphadenectomy for breast cancer.

    Science.gov (United States)

    Cheng, Hang; Clymer, Jeffrey W; Ferko, Nicole C; Patel, Leena; Soleas, Ireena M; Cameron, Chris G; Hinoul, Piet

    2016-01-01

    Mastectomy and breast-conserving surgery (BCS) are important treatment options for breast cancer patients. A previous meta-analysis demonstrated that the risk of certain complications can be reduced with the Harmonic technology compared with conventional methods in mastectomy. However, the meta-analysis did not include studies of BCS patients and focused on a subset of surgical complications. The objective of this study was to compare Harmonic technology and conventional techniques for a range of clinical outcomes and complications in both mastectomy and BCS patients, including axillary lymph node dissection. A comprehensive literature search was performed for randomized controlled trials comparing Harmonic technology and conventional methods in breast cancer surgery. Outcome measures included blood loss, drainage volume, total complications, seroma, necrosis, wound infections, ecchymosis, hematoma, hospital length of stay, and operating time. Risk of bias was analyzed for all studies. Meta-analysis was performed using random-effects models for mean differences of continuous variables and a fixed-effects model for risk ratios of dichotomous variables. Twelve studies met the inclusion criteria. Across surgery types, compared to conventional techniques, Harmonic technology reduced total complications by 52% (P=0.002), seroma by 46% (Pmastectomy patients with lymph node dissection, Harmonic technology showed significant reductions in complications in the BCS study subgroup. In this meta-analysis of both mastectomy and BCS procedures, the use of Harmonic technology reduced the risk of most complications by about half across breast cancer surgery patients. These benefits may be due to superior hemostatic capabilities of Harmonic technology and better dissection, particularly lymph node dissection. Reduction in complications and other resource outcomes may engender lower downstream health care costs.

  19. Conservation: Toward firmer ground

    Science.gov (United States)

    1975-01-01

    The following aspects of energy conservation were discussed: conservation history and goals, conservation modes, conservation accounting-criteria, and a method to overcome obstacles. The conservation modes tested fall into one of the following categories: reduced energy consumption, increased efficiency of energy utilization, or substitution of one or more forms of energy for another which is in shorter supply or in some sense thought to be of more value. The conservation accounting criteria include net energy reduction, economic, and technical criteria. A method to overcome obstacles includes (approaches such as: direct personal impact (life style, income, security, aspiration), an element of crisis, large scale involvement of environmental, safety, and health issues, connections to big government, big business, big politics, involvement of known and speculative science and technology, appeal to moral and ethical standards, the transient nature of opportunities to correct the system.

  20. Adapting TESLA technology for future cw light sources using HoBiCaT

    Science.gov (United States)

    Kugeler, O.; Neumann, A.; Anders, W.; Knobloch, J.

    2010-07-01

    The HoBiCaT facility has been set up and operated at the Helmholtz-Zentrum-Berlin and BESSY since 2005. Its purpose is testing superconducting cavities in cw mode of operation and it was successfully demonstrated that TESLA pulsed technology can be used for cw mode of operation with only minor changes. Issues that were addressed comprise of elevated dynamic thermal losses in the cavity walls, necessary modifications in the cryogenics and the cavity processing, the optimum choice of operational parameters such as cavity temperature or bandwidth, the characterization of higher order modes in the cavity, and the usability of existing tuners and couplers for cw.

  1. Iraq uses nuclear technology to improve crop productivity and adapt to climate change

    International Nuclear Information System (INIS)

    Gil, Laura

    2016-01-01

    A new drought-tolerant wheat variety developed with the support of the IAEA and the Food and Agriculture Organization of the United Nations (FAO) has increased yields fourfold in Iraq. This mutant variety now accounts for close to two thirds of all the wheat produced in the country. Iraq is increasingly making use of nuclear technology to improve its crop yields and cope with the consequences of a changing climate. Researchers in the country have developed new drought-tolerant plant varieties and improved water and soil management.

  2. Innate and adaptive immunity in the development of depression: An update on current knowledge and technological advances.

    Science.gov (United States)

    Haapakoski, Rita; Ebmeier, Klaus P; Alenius, Harri; Kivimäki, Mika

    2016-04-03

    The inflammation theory of depression, proposed over 20years ago, was influenced by early studies on T cell responses and since then has been a stimulus for numerous research projects aimed at understanding the relationship between immune function and depression. Observational studies have shown that indicators of immunity, especially C reactive protein and proinflammatory cytokines, such as interleukin 6, are associated with an increased risk of depressive disorders, although the evidence from randomized trials remains limited and only few studies have assessed the interplay between innate and adaptive immunity in depression. In this paper, we review current knowledge on the interactions between central and peripheral innate and adaptive immune molecules and the potential role of immune-related activation of microglia, inflammasomes and indoleamine-2,3-dioxygenase in the development of depressive symptoms. We highlight how combining basic immune methods with more advanced 'omics' technologies would help us to make progress in unravelling the complex associations between altered immune function and depressive disorders, in the identification of depression-specific biomarkers and in developing immunotherapeutic treatment strategies that take individual variability into account. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

  3. Adaptive and automatic red blood cell counting method based on microscopic hyperspectral imaging technology

    Science.gov (United States)

    Liu, Xi; Zhou, Mei; Qiu, Song; Sun, Li; Liu, Hongying; Li, Qingli; Wang, Yiting

    2017-12-01

    Red blood cell counting, as a routine examination, plays an important role in medical diagnoses. Although automated hematology analyzers are widely used, manual microscopic examination by a hematologist or pathologist is still unavoidable, which is time-consuming and error-prone. This paper proposes a full-automatic red blood cell counting method which is based on microscopic hyperspectral imaging of blood smears and combines spatial and spectral information to achieve high precision. The acquired hyperspectral image data of the blood smear in the visible and near-infrared spectral range are firstly preprocessed, and then a quadratic blind linear unmixing algorithm is used to get endmember abundance images. Based on mathematical morphological operation and an adaptive Otsu’s method, a binaryzation process is performed on the abundance images. Finally, the connected component labeling algorithm with magnification-based parameter setting is applied to automatically select the binary images of red blood cell cytoplasm. Experimental results show that the proposed method can perform well and has potential for clinical applications.

  4. DISSS/ET modernization feasibility of adapting existing software and hardware technologies

    Energy Technology Data Exchange (ETDEWEB)

    Strait, R.S.

    1993-09-30

    The Fission Energy and Systems Safety Program (FESSP) at LLNL was funded by the DOE Office of Safeguards and Security to develop an integrated system, hereafter referred to as the Security Clearance Electronic Processing, Transfer, Evaluation, and Recordkeeping (SCEPTER) System, for the electronic collection and transfer of personnel security data between clearance offices at contractor sites and DOE field offices and the Office of Personnel Management(OPM). This system will use existing software and hardware technologies where feasible. The project will consist of three phases. The first phase will investigate user needs, determine the feasibility of using existing technologies, and define project requirements. The second phase will be a pilot project to develop the computer systems and procedures required to automate the security clearance work flow within DOE and between DOE and OPM. Once the pilot system is implemented and tested, the decision to extend the system throughout DOE can be made. This third phase, the extension to a full production system, will require the investment of considerable funds in equipment and in the development of both a computer system and management infrastructure to support its successful operation. This investment will be undertaken only after the pilot system is operational and evaluated.

  5. Discussion on Sustainable Water Technologies for Peri-Urban Areas of Mexico City: Balancing Urbanization and Environmental Conservation

    Directory of Open Access Journals (Sweden)

    Laura Essl

    2012-09-01

    Full Text Available Often centralized water supply, sanitation and solid waste services struggle to keep up with the rapid expansion of urban areas. The peri-urban areas are at the forefront of this expansion and it is here where decentralized technologies are increasingly being implemented. The introduction of decentralized technologies allows for the development of new opportunities that enable the recovery and reuse of resources in the form of water, nutrients and energy. This resource-oriented management of water, nutrients and energy requires a sustainable system aimed at low resource use and high recovery and reuse rates. Instead of investigating each sector separately, as has been traditionally done, this article proposes and discusses a concept that seeks to combine the in- and outflows of the different sectors, reusing water and other liberated resources where possible. This paper shows and demonstrates examples of different types of sustainable technologies that can be implemented in the peri-urban areas of Mexico City [rainwater harvesting, EcoSan and biofiltros (small constructed wetlands, and (vermi-composting]. An innovative participatory planning method, combining scenario development with a participatory planning workshop with key stakeholders, was applied and resulted in three concept scenarios. Specific technologies were then selected for each concept scenario that the technical feasibility and applicability was assessed. Following this, the resulting resource flows (nutrients, water and energy were determined and analyzed. The results show that decentralized technologies not only have the potential to deliver adequate water supply, sanitation and solid waste services in peri-urban areas and lessen environmental pollution, but also can recover significant amounts of resources thereby saving costs and providing valuable inputs in, for instance, the agricultural sector. Social acceptance of the technologies and institutional cooperation, however, is

  6. Discussion on Sustainable Water Technologies for Peri-Urban Areas of Mexico City: Balancing Urbanization and Environmental Conservation

    Directory of Open Access Journals (Sweden)

    Tiemen A. Nanninga

    2012-09-01

    Full Text Available Often centralized water supply, sanitation and solid waste services struggle to keep up with the rapid expansion of urban areas. The peri-urban areas are at the forefront of this expansion and it is here where decentralized technologies are increasingly being implemented. The introduction of decentralized technologies allows for the development of new opportunities that enable the recovery and reuse of resources in the form of water, nutrients and energy. This resource-oriented management of water, nutrients and energy requires a sustainable system aimed at low resource use and high recovery and reuse rates. Instead of investigating each sector separately, as has been traditionally done, this article proposes and discusses a concept that seeks to combine the in- and outflows of the different sectors, reusing water and other liberated resources where possible. This paper shows and demonstrates examples of different types of sustainable technologies that can be implemented in the peri-urban areas of Mexico City [rainwater harvesting, EcoSan and biofiltros (small constructed wetlands, and (vermi-composting]. An innovative participatory planning method, combining scenario development with a participatory planning workshop with key stakeholders, was applied and resulted in three concept scenarios. Specific technologies were then selected for each concept scenario that the technical feasibility and applicability was assessed. Following this, the resulting resource flows (nutrients, water and energy were determined and analyzed. The results show that decentralized technologies not only have the potential to deliver adequate water supply, sanitation and solid waste services in peri-urban areas and lessen environmental pollution, but also can recover significant amounts of resources thereby saving costs and providing valuable inputs in, for instance, the agricultural sector. Social acceptance of the technologies and institutional cooperation

  7. PRATICE CRAWL – MENTAL DISTABILITIES: ADULT CHOICE OF DRIVE TECHNOLOGY ADAPTED COMPETITORS

    Directory of Open Access Journals (Sweden)

    Dominique Redon

    2014-06-01

    Full Text Available Introduction: Of the two schools most stressed about the act of propelling the crawl, crawl in practice, which is the most efficient swimming, the two modes of propulsion favorites are "The outstretched arm" next to the called swimmer paddling and "The arm bent S-shaped" under the so-called swimmer impeller (N. Lanotte, S. Lem, 2012 The debate is not yet settled (Potdevin F; Pelayo P. 2006. Any swimmer has a strategy for managing its own resources considering the cost / benefit of each stroke technique report, with the aim of improving strength (Arellano, R. (1992, its movement and hence its performance (Joshua, 1992 in retarded placed in individual practice crawl competition, open to different technical conditions, what is the movement that is most often practiced, according to "the outstretched arm" or "folded S-shaped arm "under the swimmer? Methods: We record video (Pk Chollet - 2003, during two Regional championships in France adapted swim organized by the French Federation of Adapted Sport tests crawl in Division 1 Division 2 and Division 3 according to the latest regulations for implementation first time. We question the choice: "The outstretched arm" or "arm bent S-shaped" under the swimmer, by interviews (Y.Meynaud; Duclos D.1996 professional supervisors or volunteers before tests their competitors and we competitors are questioning after their trials. Results: It appears on the video that all competitors swim the "arms outstretched" The point of view of professional or volunteer supervisors: no of them are not asked for the choice of method of propulsion is best for their competitors as they say swimming techniques they teach in their club are the same as for all disabled or not competitors. The point of view of competitors: For competitors the method of propulsion "outstretched arm" seems to them the most effective. Method "arm S" Their demand coordination of movement more difficult to obtain in the context of mental disability

  8. Basic research needs in seven energy-related technologies, conservation, conversion, transmission and storage, environmental fission, fossil, geothermal, and solar

    Energy Technology Data Exchange (ETDEWEB)

    1980-07-01

    This volume comprises seven studies performed by seven groups at seven national laboratories. The laboratories were selected because of their assigned lead roles in research pertaining to the respective technologies. Researches were requested to solicit views of other workers in the fields.

  9. Moving forward in plant food safety and security through NanoBioSensors: Adopt or adapt biomedical technologies?

    Science.gov (United States)

    Sharma, Tarun K; Ramanathan, Rajesh; Rakwal, Randeep; Agrawal, Ganesh K; Bansal, Vipul

    2015-05-01

    Plant-based foods are integral part of our day-to-day diet. Increasing world population has put forth an ever increasing demand for plant-based foods, and food security remains a major concern. Similarly, biological, chemical, and physical threats to our food and increasing regulatory demands to control the presence of foreign species in food products have made food safety a growing issue. Nanotechnology has already established its roots in diverse disciplines. However, the food industry is yet to harness the full potential of the unique capabilities offered by this next-generation technology. While there might be safety concerns in regards to integration of nanoproducts with our food products, an aspect of nanotechnology that can make remarkable contribution to different elements of the food chain is the use of nanobiosensors and diagnostic platforms for monitoring food traceability, quality, safety, and nutritional value. This brings us to an important question that whether existing diagnostic platforms that have already been well developed for biomedical and clinical application are suitable for food industry or whether the demands of the food industry are altogether different that may not allow adoption/adaptation of the existing technology. This review is an effort to raise this important "uncomfortable" yet "timely" question. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Stereoscopic-3D display design: a new paradigm with Intel Adaptive Stable Image Technology [IA-SIT

    Science.gov (United States)

    Jain, Sunil

    2012-03-01

    Stereoscopic-3D (S3D) proliferation on personal computers (PC) is mired by several technical and business challenges: a) viewing discomfort due to cross-talk amongst stereo images; b) high system cost; and c) restricted content availability. Users expect S3D visual quality to be better than, or at least equal to, what they are used to enjoying on 2D in terms of resolution, pixel density, color, and interactivity. Intel Adaptive Stable Image Technology (IA-SIT) is a foundational technology, successfully developed to resolve S3D system design challenges and deliver high quality 3D visualization at PC price points. Optimizations in display driver, panel timing firmware, backlight hardware, eyewear optical stack, and synch mechanism combined can help accomplish this goal. Agnostic to refresh rate, IA-SIT will scale with shrinking of display transistors and improvements in liquid crystal and LED materials. Industry could profusely benefit from the following calls to action:- 1) Adopt 'IA-SIT S3D Mode' in panel specs (via VESA) to help panel makers monetize S3D; 2) Adopt 'IA-SIT Eyewear Universal Optical Stack' and algorithm (via CEA) to help PC peripheral makers develop stylish glasses; 3) Adopt 'IA-SIT Real Time Profile' for sub-100uS latency control (via BT Sig) to extend BT into S3D; and 4) Adopt 'IA-SIT Architecture' for Monitors and TVs to monetize via PC attach.

  11. Living anew - About possibilities of contemporary adaptations of flats carried out in industrialised technologies in Poland

    Science.gov (United States)

    Kłopotowski, Maciej

    2017-10-01

    Around the half of Polish population currently live in the buildings constructed in the second half of the twentieth century in industrialized technologies. Economic conditions indicate that this state will not change substantially over the next decade. This situation forces people who deal with shaping housing space to take action that will raise the value of existing, technically and morally degrading, housing substance. As a result of conducted research, the author of this study pointed out that the so-called revitalization of the housing environment is carried out at the level of residents, administrators of buildings and housing estates. Their effects are often not correlated or even contradictory. He also emphasized the importance of comprehensive measures and the need for systemic solutions that integrate legislation, administration and contracting. As an important element of these actions he pointed out the need to develop a catalogue illustrating the possibility of reconstruction of housing. The article will present the results of research aimed at developing a strategy of remodelling flats, considered today unattractive, located in buildings constructed in OW-T technology. The analyses were carried out on a group of flats (about 85 m²) completed at the turn of 70s and 80s. During the construction period they were intended to be settled by families of minimum 6 people and were the largest. Their structure consists of a number of relatively small rooms (including very small bathrooms and kitchens). The author made a critical analysis of this housing offer. He defined contemporary needs of investors who are involved in buying flats of such size - they are families with one or two children. Measurable results of the work carried out are the schemes of housing conversion plans. The article presents four specific design solutions that show the direction of possible actions. According to the author, popularizing the possibility of reconstructing such flats

  12. Paradigms for parasite conservation.

    Science.gov (United States)

    Dougherty, Eric R; Carlson, Colin J; Bueno, Veronica M; Burgio, Kevin R; Cizauskas, Carrie A; Clements, Christopher F; Seidel, Dana P; Harris, Nyeema C

    2016-08-01

    Parasitic species, which depend directly on host species for their survival, represent a major regulatory force in ecosystems and a significant component of Earth's biodiversity. Yet the negative impacts of parasites observed at the host level have motivated a conservation paradigm of eradication, moving us farther from attainment of taxonomically unbiased conservation goals. Despite a growing body of literature highlighting the importance of parasite-inclusive conservation, most parasite species remain understudied, underfunded, and underappreciated. We argue the protection of parasitic biodiversity requires a paradigm shift in the perception and valuation of their role as consumer species, similar to that of apex predators in the mid-20th century. Beyond recognizing parasites as vital trophic regulators, existing tools available to conservation practitioners should explicitly account for the unique threats facing dependent species. We built upon concepts from epidemiology and economics (e.g., host-density threshold and cost-benefit analysis) to devise novel metrics of margin of error and minimum investment for parasite conservation. We define margin of error as the risk of accidental host extinction from misestimating equilibrium population sizes and predicted oscillations, while minimum investment represents the cost associated with conserving the additional hosts required to maintain viable parasite populations. This framework will aid in the identification of readily conserved parasites that present minimal health risks. To establish parasite conservation, we propose an extension of population viability analysis for host-parasite assemblages to assess extinction risk. In the direst cases, ex situ breeding programs for parasites should be evaluated to maximize success without undermining host protection. Though parasitic species pose a considerable conservation challenge, adaptations to conservation tools will help protect parasite biodiversity in the face of

  13. Adaptive and technology-independent architecture for fault-tolerant distributed AAL solutions.

    Science.gov (United States)

    Schmidt, Michael; Obermaisser, Roman

    2018-04-01

    Today's architectures for Ambient Assisted Living (AAL) must cope with a variety of challenges like flawless sensor integration and time synchronization (e.g. for sensor data fusion) while abstracting from the underlying technologies at the same time. Furthermore, an architecture for AAL must be capable to manage distributed application scenarios in order to support elderly people in all situations of their everyday life. This encompasses not just life at home but in particular the mobility of elderly people (e.g. when going for a walk or having sports) as well. Within this paper we will introduce a novel architecture for distributed AAL solutions whose design follows a modern Microservices approach by providing small core services instead of a monolithic application framework. The architecture comprises core services for sensor integration, and service discovery while supporting several communication models (periodic, sporadic, streaming). We extend the state-of-the-art by introducing a fault-tolerance model for our architecture on the basis of a fault-hypothesis describing the fault-containment regions (FCRs) with their respective failure modes and failure rates in order to support safety-critical AAL applications. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. Availability of advanced foreign energy conversion and conservation technology for use in the United States. Biennial report

    Energy Technology Data Exchange (ETDEWEB)

    Straus, R W; Thurman, R S; Carsey, J N; Fujishima, C; Hammel, J; Dietrich, P; Pfeil, R; Bottomley, K

    1978-12-01

    The assignment by DOE requested Galaxy to, Review and evaluate all field data and to define areas where foreign work is ready to be implemented by US; areas where US work might be dropped since foreign R and D is more advanced; areas where foreign R and D indicate sufficient promise for the US to initiate work in; areas where cooperative R and D ventures or licensing agreements might prove beneficial, etc. The specific technologies to be investigated by Galaxy were set forth in Tasks I and V of the contract as follows: Task I: (A) waste heat utilization, (B) advanced cycles, (C) component reliability and efficiency, (D) heat transfer, and (E) combustion and materials; Task V: (A) controls and process efficiency; (B) materials and fabrication; (C) components and heat engines; (D) thermodynamics and heat transfer; (E) fuel cells; (F) combustion and alternate fuels; and (G) heat utilization, planning and analysis. The foreign technology is briefly identified within the areas set forth. (WHK)

  15. Oil shale : could Shell's experimental oil shale technology be adapted to Alberta's bitumen carbonates?

    Energy Technology Data Exchange (ETDEWEB)

    Roche, P.

    2006-07-01

    Although Shell has been trying to develop technologies to economically extract oil from shale containing kerogen for the last 25 years, the volume of oil Shell produced from its Mahogany Research Project in Colorado has added up to less than 2500 bbls in total, and the company has recently devoted $400 million to purchase leases on carbonate reservoirs in Alberta. This article examined whether or not the technologies developed by Shell for oil shales could be used to profitably extract bitumen from carbonates. Extracting bitumen from carbonates may be easier than producing oil from shale, as the resource in carbonates is already oil, whereas the oil in oil shale is actually kerogen, which needs to be chemically cracked at extremely high temperatures. Although the technical feasibility of an in situ cracking process has been proven, work remains to be done before Shell can invest in a commercial-scale oil shale project. Challenges to oil shale production include preventing groundwater from entering target zones and keeping produced fluids out of the groundwater. However, a freeze wall test has recently been designed where chilled liquid is circulated through a closed-loop pipe system to freeze formation water, sealing off an area about the size of a football field from the surrounding strata. The energy requirements of the process that Shell is testing to produce shale oil in Colorado remain unprofitably high, as higher temperatures are necessary for thermal cracking. Shell has yet to make a decision as to what energy sources it will use to make the production process economically viable. An energy conservation group in Colorado has claimed that production of 100,000 bbls of shale oil would require the largest power plant in Colorado history. 2 figs.

  16. 邯郸市夜景观节能技术研究%Research on Handan city night-landscape energy conservation technology

    Institute of Scientific and Technical Information of China (English)

    胡金良; 齐海红

    2011-01-01

    通过对现代电气技术的研究,以可持续发展为理念,采用智能的控制系统、高效的灯具系统和绿色的能源系统,达到控制邯郸市夜景观能耗的目的,建成节能环保的夜景照明系统。%Pass the research to modern electric technology,take sustainable development as idea,adopt the intelligence navar,the high-effect lamp system and the sources of energy of green system,achieve the energy consumption controlling Handan city night-landscape' s purpose,establish the energy conservation environmental protection night scene illuminator.

  17. Economic impacts on irrigated agriculture of water conservation programs in drought

    Science.gov (United States)

    Ward, Frank A.

    2014-01-01

    This study analyzes vulnerability, impacts, and adaptability by irrigation to drought.It accounts for economic incentives affecting choices on irrigation technology, crop mix, and water sources.When surface water supplies fall, farmers increase pumping, even when pumping raises production costs.Conservation program subsidies raise the value of food production but can increase crop water depletions.

  18. On-line training in radiological protection by means of the designing and adaptation of a technological platform

    Energy Technology Data Exchange (ETDEWEB)

    Soto, M.; Campayo, J. M. [Logistica y Acondicionamientos Industriales SAU, Sorolla Center, local 10, Av. de las Cortes Valencianas No. 58, 46015 Valencia (Spain); Mayo, P. [TITANIA Servicios Tecnologicos SL, Sorolla Center, local 10, Av. de las Cortes Valencianas No. 58, 46015 Valencia (Spain); Verdu, G., E-mail: m.soto@lainsa.co [ISIRYM, Universidad Politecnica de Valencia, Camino de Vera s/n, Valencia (Spain)

    2010-10-15

    The companies that are working in maintenance, decontamination, dismantling and assessment in nuclear power plants, usually have their employees in different facilities far from its central offices. When there is a training in radiological protection applied to the nuclear field, it is difficult for these people the attendance to the course because of different reasons. One of them is the location of the formation centres which sometimes are not near from the nuclear facilities, so it is necessary the displacement of the employees, and the time in displacements to the formation centre and costs increase exponentially. In addition if they go to the courses they usually cannot attend their daily work with the same effectiveness depending on the duration of the course. In this work we present a technological platform that is designed in collaboration with the university of give different courses related with radiological field applied to nuclear and radioactive facilities. This platform is adapted and designed to different contents depending on the course. At the main screen we have included and index and announces of the course, so we have arranged the contents in different areas and sections. When the student finishes an area, an evaluation has to be done to prove the understanding of the lessons. We have included films of different activities as decontamination devices, radiation detectors, etc. with the contents to make the explanations more understandable to the student. The student can access to this platform with private password and follow the course individually. The course is complemented with a final review and exam that are not online to guarantee that the training is well finished. This type of training is more flexitime and can be adapted to the necessities of each user, avoiding high costs and unnecessary displacements. (Author)

  19. On-line training in radiological protection by means of the designing and adaptation of a technological platform

    International Nuclear Information System (INIS)

    Soto, M.; Campayo, J. M.; Mayo, P.; Verdu, G.

    2010-10-01

    The companies that are working in maintenance, decontamination, dismantling and assessment in nuclear power plants, usually have their employees in different facilities far from its central offices. When there is a training in radiological protection applied to the nuclear field, it is difficult for these people the attendance to the course because of different reasons. One of them is the location of the formation centres which sometimes are not near from the nuclear facilities, so it is necessary the displacement of the employees, and the time in displacements to the formation centre and costs increase exponentially. In addition if they go to the courses they usually cannot attend their daily work with the same effectiveness depending on the duration of the course. In this work we present a technological platform that is designed in collaboration with the university of give different courses related with radiological field applied to nuclear and radioactive facilities. This platform is adapted and designed to different contents depending on the course. At the main screen we have included and index and announces of the course, so we have arranged the contents in different areas and sections. When the student finishes an area, an evaluation has to be done to prove the understanding of the lessons. We have included films of different activities as decontamination devices, radiation detectors, etc. with the contents to make the explanations more understandable to the student. The student can access to this platform with private password and follow the course individually. The course is complemented with a final review and exam that are not online to guarantee that the training is well finished. This type of training is more flexitime and can be adapted to the necessities of each user, avoiding high costs and unnecessary displacements. (Author)

  20. Comparative proteome analysis reveals conserved and specific adaptation patterns of Staphylococcus aureus after internalization by different types of human non-professional phagocytic host cells

    Directory of Open Access Journals (Sweden)

    Kristin eSurmann

    2014-08-01

    Full Text Available Staphylococcus aureus is a human pathogen that can cause a wide range of diseases. Although formerly regarded as extracellular pathogen, it has been shown that S. aureus can also be internalized by host cells and persist within these cells. In the present study, we comparatively analyzed survival and physiological adaptation of S. aureus HG001 after internalization by two human lung epithelial cell lines (S9 and A549, and human embryonic kidney cells (HEK 293. Combining enrichment of bacteria from host-pathogen assays by cell sorting and quantitation of the pathogen´s proteome by mass spectrometry we characterized S. aureus adaptation during the initial phase between 2.5 h and 6.5 h post-infection. Starting with about 2x106 bacteria, roughly 1,450 S. aureus proteins, including virulence factors and metabolic enzymes were identified by spectral comparison and classical database searches. Most of the bacterial adaptation reactions, such as decreases in levels of ribosomal proteins and metabolic enzymes or increases in amounts of proteins involved in arginine and lysine biosynthesis, coding for terminal oxidases and stress responsive genes or activation of the sigma factor SigB were observed after internalization into any of the three cell lines studied. However, differences were noted in central carbon metabolism including regulation of fermentation and threonine degradation. Since these differences coincided with different intracellular growth behavior, complementary profiling of the metabolome of the different non-infected host cell types was performed. This revealed similar levels of intracellular glucose but host cell specific differences in the amounts of amino acids such as glycine, threonine or glutamate. With this comparative study we provide an impression of the common and specific features of the adaptation of S. aureus HG001 to specific host cell environments as a starting point for follow-up studies with different strain isolates and

  1. Can Conservation Contracts Co-exist with Change? Payment for Ecosystem Services in the Context of Adaptive Decision-Making and Sustainability

    Science.gov (United States)

    Hayes, Tanya; Murtinho, Felipe; Cárdenas Camacho, Luis Mario; Crespo, Patricio; McHugh, Sarah; Salmerón, David

    2015-01-01

    This paper considers the ability of payment for ecosystem services (PES) programs to operate in the context of dynamic and complex social-ecological systems. Drawing on the experiences of two different PES programs in Latin America, we examine how PES institutions fit with the tenets of adaptive decision-making for sustainable resource management. We identify how the program goals and the connection to the market influence the incentive structure, information gathering, learning and feedback processes, and the structure of decision-making rights, specifically the ability to make and modify resource-use rules. Although limited in their generalizability, findings from the two case studies suggest a tension between the contractual model of PES and adaptive decision-making in natural resource systems. PES programs are not inherently decentralized, flexible management tools, as PES contracts tend to restrict decision-making rights and offer minimal flexibility mechanisms to change resource-use practices over the duration of the contract period. Furthermore, PES design and flexibility is heavily dependent on the goals and mission of the buyer and the respective market. If PES is to facilitate sustainable resource management, greater attention is needed to assess how the institutional design of the PES contracts influence the motivation and capacity of participants and program officers alike to adaptively manage the respective resource systems.

  2. Can conservation contracts co-exist with change? Payment for ecosystem services in the context of adaptive decision-making and sustainability.

    Science.gov (United States)

    Hayes, Tanya; Murtinho, Felipe; Cárdenas Camacho, Luis Mario; Crespo, Patricio; McHugh, Sarah; Salmerón, David

    2015-01-01

    This paper considers the ability of payment for ecosystem services (PES) programs to operate in the context of dynamic and complex social-ecological systems. Drawing on the experiences of two different PES programs in Latin America, we examine how PES institutions fit with the tenets of adaptive decision-making for sustainable resource management. We identify how the program goals and the connection to the market influence the incentive structure, information gathering, learning and feedback processes, and the structure of decision-making rights, specifically the ability to make and modify resource-use rules. Although limited in their generalizability, findings from the two case studies suggest a tension between the contractual model of PES and adaptive decision-making in natural resource systems. PES programs are not inherently decentralized, flexible management tools, as PES contracts tend to restrict decision-making rights and offer minimal flexibility mechanisms to change resource-use practices over the duration of the contract period. Furthermore, PES design and flexibility is heavily dependent on the goals and mission of the buyer and the respective market. If PES is to facilitate sustainable resource management, greater attention is needed to assess how the institutional design of the PES contracts influence the motivation and capacity of participants and program officers alike to adaptively manage the respective resource systems.

  3. A systematic review and meta-analysis of Harmonic technology compared with conventional techniques in mastectomy and breast-conserving surgery with lymphadenectomy for breast cancer

    Directory of Open Access Journals (Sweden)

    Cheng H

    2016-07-01

    Full Text Available Hang Cheng,1 Jeffrey W Clymer,1 Nicole C Ferko,2 Leena Patel,2 Ireena M Soleas,2 Chris G Cameron,2 Piet Hinoul1 1Ethicon Inc., Cincinnati, OH, USA; 2Cornerstone Research Group, Burlington, ON, Canada Background: Mastectomy and breast-conserving surgery (BCS are important treatment options for breast cancer patients. A previous meta-analysis demonstrated that the risk of certain complications can be reduced with the Harmonic technology compared with conventional methods in mastectomy. However, the meta-analysis did not include studies of BCS patients and focused on a subset of surgical complications. The objective of this study was to compare Harmonic technology and conventional techniques for a range of clinical outcomes and complications in both mastectomy and BCS patients, including axillary lymph node dissection.Methods: A comprehensive literature search was performed for randomized controlled trials comparing Harmonic technology and conventional methods in breast cancer surgery. Outcome measures included blood loss, drainage volume, total complications, seroma, necrosis, wound infections, ecchymosis, hematoma, hospital length of stay, and operating time. Risk of bias was analyzed for all studies. Meta-analysis was performed using random-effects models for mean differences of continuous variables and a fixed-effects model for risk ratios of dichotomous variables.Results: Twelve studies met the inclusion criteria. Across surgery types, compared to conventional techniques, Harmonic technology reduced total complications by 52% (P=0.002, seroma by 46% (P<0.0001, necrosis by 49% (P=0.04, postoperative chest wall drainage by 46% (P=0.0005, blood loss by 38% (P=0.0005, and length of stay by 22% (P=0.007. Although benefits generally appeared greatest in mastectomy patients with lymph node dissection, ­Harmonic technology showed significant reductions in complications in the BCS study subgroup.Conclusion: In this meta-analysis of both mastectomy and

  4. Cryo magnetic separation adaptation to environment technologies: application to industrial effluents; Adaptation de la separation cryomagnetique aux technologies de l`environnement: application a l`epuration d`effluents liquides industriels

    Energy Technology Data Exchange (ETDEWEB)

    Bureau, V

    1993-12-20

    Cryomagnetic separation adaptation to environment technologies application to industrial liquid effluents. The performance, obtained by superconducting high filed - high gradient magnetic separation, permitted to foresee the magnetic treatment of heavy metals in rinse waters, derived from the surface finishing industry. The paramagnetic ions, precipitated in basic media as hydroxides, present a very hydrated amorphous structure, which masks their subjacent magnetic properties. Coprecipitation of a `magnetic carrier`, jointly with the heavy metals, has been studied: ferric chloride forms in basic media, an hydrated iron oxide. Its structure is of the goethite type, and it stabilizes as hematite. The magnetic susceptibility of the obtained product is still weak and its crystalline structure is not enough affirmative to utilize magnetic filtration with efficiency. Mixture of ferrous sulphate and ferric chloride forms, in a basic media, an hydrated magnetite. Initial ideal ratio between divalent iron and trivalent iron, varies between 0,5 and 1,2. This mixture, coprecipitated with the heavy metals, permits to optimize the magnetic cleaning of the fluids in a high field - high gradient filter. (author)

  5. ASPECTS OF THE ARCHITECTURAL AND URBAN HERITAGE: FROM REGISTERS TO CONSERVATION FOR ADAPTIVE AND MODERN USE AT THE HISTORIC CORES OF SALT AND IRBID, JORDAN

    Directory of Open Access Journals (Sweden)

    Leen Adeeb Fakhoury

    2017-07-01

    Full Text Available This paper attempts to present and discuss the outcome of the results of the key different studies and projects carried out at Salt and at Irbid historic cores.  It focuses on the executed urban heritage projects undertaken mainly by the Ministry of Tourism and Antiquities (MoTA of Jordan in the last two decades. It discusses their different aspects through initial assessment of the loss and degradation of the cultural heritage assets of the two cities; the fragmentation and lack of connectivity between the modern and historic cores; issues of sustainability of architectural and urban heritage projects i.e. tourism planning and conservation; and reuse projects at the historic cores in relation to cultural, physical factors and development needs. It also addresses the behaviour and characteristics of the urban regeneration process in those two historic cities, starting from their documentation to examination of the different aspects of the currently adopted urban practices and policies, and their impact on the existing urban heritage, depending on the specific identity of the respective historic cores. Finally, it aims to define the main constraints and challenges for the reuse of the existing heritage fabric including the local community quality of life, while building on sustainable heritage activities accommodating tourism opportunities. This will give, at least, some indications from which we can identify a use or combination of uses, and practical steps needed for successful heritage conservation actions in Jordan, in order to retain the cultural significance of the place.

  6. Examining the Use of Adaptive Technologies to Increase the Hands-On Participation of Students with Blindness or Low Vision in Secondary-School Chemistry and Physics

    Science.gov (United States)

    Supalo, Cary A.; Humphrey, Jennifer R.; Mallouk, Thomas E.; Wohlers, H. David; Carlsen, William S.

    2016-01-01

    To determine whether a suite of audible adaptive technologies would increase the hands-on participation of high school students with blindness or low vision in chemistry and physics courses, data were examined from a multi-year field study conducted with students in mainstream classrooms at secondary schools across the United States. The students…

  7. Building Adaptive Capacity of Pathways in Technology Early College High School Stakeholders: A Multiple-Case Study on the Influence of Performance, Leadership, and Organizational Learning

    Science.gov (United States)

    Michaud-Wells, Amy

    2016-01-01

    The purpose of this qualitative study was to explore the perceptions and beliefs of Pathways in Technology Early College High School (P-TECH) leaders and stakeholders regarding the personal and professional experiences that contributed to the development of adaptive capacity. This embedded multiple-case study was anchored by the interrelated…

  8. Modelling energy technology dynamics: methodology for adaptive expectations models with learning by doing and learning by searching

    International Nuclear Information System (INIS)

    Kouvaritakis, N.; Soria, A.; Isoard, S.

    2000-01-01

    This paper presents a module endogenising technical change which is capable of being attached to large scale energy models that follow an adaptive-expectations. The formulation includes, apart from the more classical learning by doing effects, quantitative relationships between technology performance and R and D expenditure. It even attempts to go further by partially endogenising the latter by incorporating an optimisation module describing private equipment manufacturers' R and D budget allocation in a context of risk and expectation. Having presented this module in abstract, the paper proceeds to describe how an operational version of it has been constructed and implemented inside a large-scale partial equilibrium world energy model (the POLES model). Concerning learning functions problems associated with the data are alluded to, the hybrid econometric methods used to estimate them are presented as well as the adjustments which had to be effected to ensure a smooth incorporation into the large model. In the final sections is explained the use of the model itself to generate partial foresight parameters for the determination of return expectations particularly in view of CO 2 constraints and associated carbon values. (orig.)

  9. Evaluation of soil conservation technologies from the perspective of selected physical soil properties and infiltration capacity of the soil

    Directory of Open Access Journals (Sweden)

    Miroslav Dumbrovský

    2011-01-01

    Full Text Available This paper evaluates different technologies of soil cultivation (conventional and minimization in terms of physical properties and water regime of soils, where infiltration of surface water is a major component of subsurface water. Soil physical properties (the current humidity, reduced bulk density, porosity, water retention capacity of soil, pore distribution and soil aeration is determined from soil samples taken from the organic horizon according to standard methodology. To observe the infiltration characteristics of surface layers of topsoil, the drench method (double ring infiltrometers was used. For the evaluation of field measurements of infiltration, empirical and physically derived equations by Kostiakov and Philip and the three-parameter Philip-type equation were used. The Philip three-parameter equation provides physical based parameters near the theoretical values, a good estimation of saturated hydraulic conductivity Ks and sorptivity C1. The parameter S of Philip’s equation describes the real value of the sorptivity of the soil. Experimental research work on the experimental plots H. Meziříčko proceeded in the years 2005–2008.

  10. Culturally-adapted and audio-technology assisted HIV/AIDS awareness and education program in rural Nigeria: a cohort study

    Directory of Open Access Journals (Sweden)

    Lennox Jeffrey L

    2010-02-01

    Full Text Available Abstract Background HIV-awareness programs tailored toward the needs of rural communities are needed. We sought to quantify change in HIV knowledge in three rural Nigerian villages following an integrated culturally adapted and technology assisted educational intervention. Methods A prospective 14-week cohort study was designed to compare short-term changes in HIV knowledge between seminar-based education program and a novel program, which capitalized on the rural culture of small-group oral learning and was delivered by portable digital-audio technology. Results Participants were mostly Moslem (99%, male (53.5%, with no formal education (55%. Baseline HIV knowledge was low ( Conclusions Baseline HIV-awareness was low. Culturally adapted, technology-assisted HIV education program is a feasible cost-effective method of raising HIV awareness among low-literacy rural communities.

  11. Conservation Value

    OpenAIRE

    Tisdell, Clement A.

    2010-01-01

    This paper outlines the significance of the concept of conservation value and discusses ways in which it is determined paying attention to views stemming from utilitarian ethics and from deontological ethics. The importance of user costs in relation to economic decisions about the conservation and use of natural resources is emphasised. Particular attention is given to competing views about the importance of conserving natural resources in order to achieve economic sustainability. This then l...

  12. Application Of 137Cs And 7Be To Assess The Effectiveness Of Soil Conservation Technologies In The Central Highlands Of Vietnam

    International Nuclear Information System (INIS)

    Phan Son Hai; Tran Dinh Khoa; Nguyen Dao; Nguyen Thi Mui; Tran Van Hoa; Trinh Cong Tu

    2008-01-01

    The combined use of 137 Cs and 7 Be for assessment of medium- and short-term soil erosion rates for sloping lands with and without soil conservation technologies in the Central Highlands of Vietnam has been carried out. For the 2.5 ha mulberry field with the slope gradient of about 15%, where green manure hedgerows have been utilized as a soil conservation measure for 22 years, about 54.6% of the area suffered from erosion with erosion rates varying from 0.6 to 70 t ha -1 y -1 (the average: 31 t ha -1 y -1 ), and deposition occurred for 45.4% of the area with the deposition rates ranging between 0.2 and 74 t ha-1 y-1 (the average: 36 t ha -1 y -1 ). The medium-term erosion rate at this field was 1.2 ± 0.6 t ha -1 y -1 , and short-term erosion rate was 1.5 ± 0.24 t ha -1 y -1 . Soil erosion was almost controlled by the shrubby hedgerows and the net erosion rate was reduced from 28 t ha -1 y -1 to 1.2 t ha -1 y -1 . 137 Cs and 7 Be were also used for assessment of soil erosion rates for two 0.5 ha coffee plots with the slope gradient of about 25%. For the plot without soil conservation, soil erosion occurred for all sampling points with medium-term erosion rates ranging between 1.2 t ha -1 y -1 and 35 t ha -1 y -1 (the average erosion rate was 22.7 ± 1.2 t ha -1 y -1 ). The short term soil erosion rate estimated by 7 Be technique in the year 2005 was 32.7 ± 6.1 t ha -1 y -1 for this plot. For the plot with the last five year presence of Vetiver strips, about 93% of the area suffered from medium term erosion with erosion rates varying from 3 t ha -1 y -1 to 33 t ha -1 y -1 (the mean is 22.2 t ha -1 y -1 ), and medium term deposition occurred for only 7% of the area with the deposition rates ranging between 1.3 and 1.4 t ha -1 y -1 , resulting in the net erosion rate of 20.4 ± 0.6 t ha -1 y -1 . The short term soil erosion rate at this plot estimated by 7 Be technique in the year 2005 was 2.3 t ha -1 y -1 . By using Vetiver strips as a soil conservation technology

  13. Adaptive Lighting

    DEFF Research Database (Denmark)

    Petersen, Kjell Yngve; Søndergaard, Karin; Kongshaug, Jesper

    2015-01-01

    the investigations of lighting scenarios carried out in two test installations: White Cube and White Box. The test installations are discussed as large-scale experiential instruments. In these test installations we examine what could potentially occur when light using LED technology is integrated and distributed......Adaptive Lighting Adaptive lighting is based on a partial automation of the possibilities to adjust the colour tone and brightness levels of light in order to adapt to people’s needs and desires. IT support is key to the technical developments that afford adaptive control systems. The possibilities...... differently into an architectural body. We also examine what might occur when light is dynamic and able to change colour, intensity and direction, and when it is adaptive and can be brought into interaction with its surroundings. In short, what happens to an architectural space when artificial lighting ceases...

  14. Climate-Adapted Soil Cultivation as an Aspect for Sustainable Farming – Task-Technology-Fit of a Decision Support System

    Directory of Open Access Journals (Sweden)

    Welf Guenther-Lübbers

    2013-03-01

    Full Text Available Due to global climate change and its impact on local weather conditions, decision support systems are becoming more important in agriculture. Such systems allow farmers to adapt more effectively to the complex changes affecting their farms. Marginal production sites must apply new tillage strategies adapted to new climatic conditions. Information about proper strategy adjustments is often disseminated through agricultural extension services and journals. A new internet information platform, KlimaBob, which focuses on climate-flexible tillage, was established under the auspices of the Innovation Network of Climate Change Adaptation Brandenburg Berlin. Successful and permanent introduction of such a system requires analysis and verification of its acceptance among individual farmers. This study addresses this need by applying the established task-technology fit approach. A survey was conducted among farmers in the Brandenburg region. The resulting data provided the basis for a structural equation model that explains and evaluates the task-technology fit of the KlimaBob platform. The results indicate that the performance spectrum of the system exerts a strong influence on the task-technology fit when assessed by both the name characteristics of KlimaBob and the individual characteristics of users (for example, time management, technology affinity and risk attitude.

  15. Besoins perçus et adaptation des démarches d’enseignement: le cas de l’enseignement des sciences et technologies au secondaire

    Directory of Open Access Journals (Sweden)

    Jean-Claude Kalubi

    2009-07-01

    Full Text Available Cet article traite de l’adaptation des démarches d’enseignement en cours d’action, adoptées par les enseignants des sciences et technologies de l’école secondaire. Il vise à comprendre les processus dynamiques de l’adaptation de l’enseignement. Il s’appuie sur des données qui ont été obtenues grâce à un protocole de recherche qualitative axé sur des techniques de groupes de réflexion. Les résultats de la recherche mettent en évidence l’hétérogénéité des parcours d’adaptation des enseignants. Ils soulignent la nécessité du professionnalisme de l’enseignant des sciences et technologies. Ils suggèrent de prendre en considération la complexité des besoins d’adaptation. Ceux-ci commandent en définitive la compatibilité entre les démarches de l’enseignant et les besoins de ses élèves. Le processus d’adaptation est aussi guidé par le plaisir de la reconnaissance, les rapports de l’enseignant aux savoirs, de même que par la défense des valeurs collectives.Mots clé: adaptation de l’enseignement, perception des besoins, enseignement des sciences et technologies This article deals with the adjustment of teaching approaches made by high school science and technology teachers while teaching. It aims at achieving a better understanding of the dynamic processes of teaching adjustment. It relies on a qualitative methodology using focus groups. Data analysis shows the multiplicity of ways that teachers use to adjust their teaching. It stresses out the importance of science and technology teachers’ professionalism and suggests taking into account the complexity of teacher and student needs in the equation of teaching adjustment. Those needs call for an increased compatibility between teaching approaches and students’ needs. The adjustment of teaching approaches is also related to the quest for recognition, the teacher relationship with knowledge and the collective values in place

  16. Graded Proteasome Dysfunction in Caenorhabditis elegans Activates an Adaptive Response Involving the Conserved SKN-1 and ELT-2 Transcription Factors and the Autophagy-Lysosome Pathway.

    Directory of Open Access Journals (Sweden)

    Scott A Keith

    2016-02-01

    Full Text Available The maintenance of cellular proteins in a biologically active and structurally stable state is a vital endeavor involving multiple cellular pathways. One such pathway is the ubiquitin-proteasome system that represents a major route for protein degradation, and reductions in this pathway usually have adverse effects on the health of cells and tissues. Here, we demonstrate that loss-of-function mutants of the Caenorhabditis elegans proteasome subunit, RPN-10, exhibit moderate proteasome dysfunction and unexpectedly develop both increased longevity and enhanced resistance to multiple threats to the proteome, including heat, oxidative stress, and the presence of aggregation prone proteins. The rpn-10 mutant animals survive through the activation of compensatory mechanisms regulated by the conserved SKN-1/Nrf2 and ELT-2/GATA transcription factors that mediate the increased expression of genes encoding proteasome subunits as well as those mediating oxidative- and heat-stress responses. Additionally, we find that the rpn-10 mutant also shows enhanced activity of the autophagy-lysosome pathway as evidenced by increased expression of the multiple autophagy genes including atg-16.2, lgg-1, and bec-1, and also by an increase in GFP::LGG-1 puncta. Consistent with a critical role for this pathway, the enhanced resistance of the rpn-10 mutant to aggregation prone proteins depends on autophagy genes atg-13, atg-16.2, and prmt-1. Furthermore, the rpn-10 mutant is particularly sensitive to the inhibition of lysosome activity via either RNAi or chemical means. We also find that the rpn-10 mutant shows a reduction in the numbers of intestinal lysosomes, and that the elt-2 gene also plays a novel and vital role in controlling the production of functional lysosomes by the intestine. Overall, these experiments suggest that moderate proteasome dysfunction could be leveraged to improve protein homeostasis and organismal health and longevity, and that the rpn-10 mutant

  17. Developing adaptive capacity for responding to environmental change in the Arab Gulf States: Uncertainties to linking ecosystem conservation, sustainable development and society in authoritarian rentier economies

    Science.gov (United States)

    Spiess, Andy

    2008-12-01

    The recent assessment by the Intergovernmental Panel on Climate Change (IPCC) has emphasized that understanding the institutional context in which policies are made and implemented is critical to define sustainable development paths from a climate change perspective. Nevertheless, while the importance of social, political and cultural factors is getting more recognition in some parts of the world, little is known about the human dimensions or the contexts in which they operate in the affluent oil economies of the Arabian Peninsula. Policies that implicitly subsidize or support a wasteful and environmentally destructive use of resources are still pervasive, while noteworthy environmental improvements still face formidable political and institutional constraints to the adaptation of the necessary far reaching and multisectoral approach. The principal aim of this paper is to identify some of the major shortcomings within the special context of the Arab Gulf states' socio-cultural environment in support of appropriate development pathways. Conclusions highlight that past and current policy recommendations for mitigating environmental threats are likely to be ineffective. This is because they are based on the unverified assumption that Western-derived standards of conduct, specifically the normative concept of "good governance" and "democracy", will be adopted in non-Western politico-cultural contexts.

  18. Steel and Aluminum Energy Conservation and Technology Competitiveness Act of 1988: Annual report of the metals initiative for fiscal year 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-01-01

    This annual report has been prepared for the President and Congress describing the activities carried out under the Steel and Aluminum Energy Conservation and Technology Competitiveness Act of 1988, commonly referred to as the Metals Initiative. The Act has the following purposes: (1) increase energy efficiency and enhance the competitiveness of the American steel, aluminum, and copper industries; and (2) continue research and development efforts begun under the U.S. Department of Energy (DOE) program known as the Steel Initiative. These activities are detailed in a subsequent section. Other sections describe the appropriation history, the distribution of funds through fiscal year 1996, and the estimated funds necessary to continue projects through fiscal year 1997. The Metals Initiative supported four research and development projects with the U.S. Steel industry: (1) steel plant waste oxide recycling and resource recovery by smelting, (2) electrochemical dezincing of steel scrap, (3) rapid analysis of molten metals using laser-produced plasmas, and (4) advanced process control. There are three Metals Initiative projects with the aluminum industry: (1) evaluation of TiB2-G cathode components, (2) energy efficient pressure calciner, and (3) spray forming of aluminum. 1 tab.

  19. Steel and Aluminum Energy Conservation and Technology Competitiveness Act of 1988: Annual report of the metals initiative for fiscal year 1996

    International Nuclear Information System (INIS)

    1998-01-01

    This annual report has been prepared for the President and Congress describing the activities carried out under the Steel and Aluminum Energy Conservation and Technology Competitiveness Act of 1988, commonly referred to as the Metals Initiative. The Act has the following purposes: (1) increase energy efficiency and enhance the competitiveness of the American steel, aluminum, and copper industries; and (2) continue research and development efforts begun under the U.S. Department of Energy (DOE) program known as the Steel Initiative. These activities are detailed in a subsequent section. Other sections describe the appropriation history, the distribution of funds through fiscal year 1996, and the estimated funds necessary to continue projects through fiscal year 1997. The Metals Initiative supported four research and development projects with the U.S. Steel industry: (1) steel plant waste oxide recycling and resource recovery by smelting, (2) electrochemical dezincing of steel scrap, (3) rapid analysis of molten metals using laser-produced plasmas, and (4) advanced process control. There are three Metals Initiative projects with the aluminum industry: (1) evaluation of TiB2-G cathode components, (2) energy efficient pressure calciner, and (3) spray forming of aluminum. 1 tab

  20. Towards an adaptive management approach for the conservation of rare antelope in the Kruger National Park - outcome of a workshop held in May 2000

    Directory of Open Access Journals (Sweden)

    C.C. Grant

    2000-07-01

    Full Text Available A precipitous drop in rare antelope numbers specifically roan (Hippotragus equinis sable (Hippotragus niger and tsessebe (Damaliscus lunatus since 1986 has become one of the main concerns of management. The zebra (Equus burchelli population in the preferred habitats of these species had increased with the development of artificial waterpoints especially in the areas occupied by roan and tsessebe, and these events are hypothesised to be the main cause of the decline. Closure of artificial waterpoints resulted in moving the high-density, water-dependent zebra from the northern basalt plains, the preferred roan habitat. However, the expected responding increase in the rare antelope populations did not materialise. This lack of response over six years necessitated a critical re-evaluation of the management of rare antelope in the Kruger National Park. Subsequently, a workshop was held at Skukuza during May 2000. The options for adaptive management of the declining rare antelope populations, which was discussed at the workshop, is the subject of this manuscript. The participants felt that the removal/closure of artificial waterpoints was the most unintrusive management tool available to move high density grazers from the habitats preferred by rare antelope. Waterpoints to be closed should be carefully evaluated, and time allowed for rare antelope to respond to habitat changes. Boosting populations of roan and tsessebe by supplementing animals was seriously considered, with the proviso that it should be done under favourable circumstances. Small patch fires that could provide green grazing over extended periods were recommended. Predator control was discussed but could not obtain general support as a viable option in the Kruger National Park.

  1. Conservation Genetics of the Cheetah: Lessons Learned and New Opportunities.

    Science.gov (United States)

    O'Brien, Stephen J; Johnson, Warren E; Driscoll, Carlos A; Dobrynin, Pavel; Marker, Laurie

    2017-09-01

    The dwindling wildlife species of our planet have become a cause célèbre for conservation groups, governments, and concerned citizens throughout the world. The application of powerful new genetic technologies to surviving populations of threatened mammals has revolutionized our ability to recognize hidden perils that afflict them. We have learned new lessons of survival, adaptation, and evolution from viewing the natural history of genomes in hundreds of detailed studies. A single case history of one species, the African cheetah, Acinonyx jubatus, is here reviewed to reveal a long-term story of conservation challenges and action informed by genetic discoveries and insights. A synthesis of 3 decades of data, interpretation, and controversy, capped by whole genome sequence analysis of cheetahs, provides a compelling tale of conservation relevance and action to protect this species and other threatened wildlife. © The American Genetic Association 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  2. Technologies, Development Tools, and Patterns for Automatic Generation and Customization of Adaptable Distributed Real-Time and Embedded (DRE) Middleware

    National Research Council Canada - National Science Library

    Hatcliff, John; Dwyer, Matthew; Mizuno, Masaaki; Singh, Gurdip; Daugherty, Gary

    2005-01-01

    .... PCES work has shown how model-integrated computing and adaptive and flexible middleware frameworks can be applied for defining, analyzing, generating, and customizing large-scale high-assurance, high...

  3. Algorithm Design and Validation for Adaptive Nonlinear Control Enhancement (ADVANCE) Technology Development for Resilient Flight Control, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — SSCI proposes to develop and test a framework referred to as the ADVANCE (Algorithm Design and Validation for Adaptive Nonlinear Control Enhancement), within which...

  4. Electric power conservation in Brazil

    International Nuclear Information System (INIS)

    Hollanda, J.B. de

    1989-01-01

    The Brazilian Electric Power Conservation Program (PROCEL) is discussed. The main objective of this program is the optimization of electric power use, including consideration about prices, technology development and legislation. (M.V.M.)

  5. Energy conservation in industry

    International Nuclear Information System (INIS)

    Pembleton, P.

    1992-01-01

    Energy Conservation in Industry is the first number in the Energy and Environmental Series of the Industrial and Technological Information Bank (INTIB). The Series supersedes the INECA Journal and reflects the broader information programme undertaken by INTIB. The present number of the Series contains contributions from three major international databases and five topic-specific sources, including three United Nations Organizations. The present publication consists of a recent technical report on a current topic: reducing energy loss in four industrial sectors and improving energy conservation through waste-heat recovery, followed by two sections containing abstracts of technical materials

  6. Proceedings of the International Seminar on Electric Power Conservation

    International Nuclear Information System (INIS)

    1989-01-01

    The experiences from 10 different countries on energy conservation are discussed in this seminar. Electric power conservation in Brazil, conservation in commercial sector, comparison between international programs and new technology are also included. (M.V.M.)

  7. Conservation endocrinology

    Science.gov (United States)

    McCormick, Stephen; Romero, L. Michael

    2017-01-01

    Endocrinologists can make significant contributions to conservation biology by helping to understand the mechanisms by which organisms cope with changing environments. Field endocrine techniques have advanced rapidly in recent years and can provide substantial information on the growth, stress, and reproductive status of individual animals, thereby providing insight into current and future responses of populations to changes in the environment. Environmental stressors and reproductive status can be detected nonlethally by measuring a number of endocrine-related endpoints, including steroids in plasma, living and nonliving tissue, urine, and feces. Information on the environmental or endocrine requirements of individual species for normal growth, development, and reproduction will provide critical information for species and ecosystem conservation. For many taxa, basic information on endocrinology is lacking, and advances in conservation endocrinology will require approaches that are both “basic” and “applied” and include integration of laboratory and field approaches.

  8. Adapting to extreme events related to natural variability and climate change: the imperative of coupling technology with strong regulation and governance.

    Science.gov (United States)

    Kythreotis, A P; Mercer, T G; Frostick, L E

    2013-09-03

    In recent years there has been an increase in extreme events related to natural variability (such as earthquakes, tsunamis and hurricanes) and climate change (such as flooding and more extreme weather). Developing innovative technologies is crucial in making society more resilient to such events. However, little emphasis has been placed on the role of human decision-making in maximizing the positive impacts of technological developments. This is exacerbated by the lack of appropriate adaptation options and the privatization of existing infrastructure, which can leave people exposed to increasing risk. This work examines the need for more robust government regulation and legislation to complement developments and innovations in technology in order to protect communities against such extreme events.

  9. Apparatus-Program Complexes Processing and Creation of Essentially non-Format Documents on the Basis of Technology Auto-Adaptive Fonts

    Directory of Open Access Journals (Sweden)

    E. G. Andrianova

    2014-01-01

    Full Text Available The need to translate paper documents into electronic form demanded a development of methods and algorithms for automatic processing systems and web publishing unformatted graphic documents of on-line libraries. Translation of scanned images into modern formats of electronic documents using OCR programmes faces serious difficulties. These difficulties are connected with the standardization set of fonts and design of printed documents. There is also a need to maintain the original form of electronic format of such documents. The article discusses the possibility for building an extensible adaptive dictionary of graphic objects, which constitute unformatted graphics documents. Dictionary automatically adjusted as graphics processing and accumulation of statistical information for each new document. This adaptive extensible dictionary of graphic letters, fonts, and other objects of automated particular document processing is called "auto-adaptive font", and a set of its application methods is named "auto-adaptive font technology."Based on the theory of estimation algorithms, a mathematical model is designed. It allows us to represent all objects of unformatted graphic document in a unified manner to build a feature vector for each object, and evaluate a similarity of these objects in the selected metric. The algorithm of the adaptive models of graphic images is developed and a criterion for combining similar properties in one element to build an auto-adaptive font is offered thus allowing us to build a software core of hardware-software complex for processing the unformatted graphic documents. A standard block diagram of hardware-software complex is developed to process the unformatted graphic documents. The article presents a description of all the blocks of this complex, including document processing station and its interaction with the web server of publishing electronic documents.

  10. Fiscal 1997 report on the model project for the effective energy consumption in developing countries. Survey of changes of energy conservation technology and environmental protection technology in the oil refining industry in Japan; 1997 nendo chosa hokokusho. Hatten tojokoku energy shohi koritsuka model jigyo (Nippon sekiyu seiseigyo ni okeru sho energy gijutsu to kankyo taisaku gijutsu no hensen chosa hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For global scale measures to be taken for environmental protection, it becomes more and more important in the future to positively transfer and spread energy conservation technologies of Japan to overseas countries. Especially, it is effective for both economic growth in the Asian region and global environmental protection to transfer technologies which the oil refining industry has been developing and accumulating. Energy conservation in the oil refining industry means the energy conservation by strengthening the operational control at the first and second oil crises in the first stage, the energy conservation in the second stage which was accompanied by small and medium scale plant/equipment investments during several years after the first stage, and the energy conservation in the third stage which was accompanied by large scale investments from the first half of the 1980s to the present, resulting in improvement of 40% over before the first oil crisis. As to environmental protection measures, measures to reduce waste from oil refinery against air pollution and water pollution were prepared by the first half of the 1970s, and technologies were established of waste water treatment, flue gas desulfurization and denitrification. A lot of facilities for improvement of product quality and for low pollution were installed. In addition to environmental technologies, also in other industries, there were seen the heightening of thermal efficiency of kiln and thermal efficiency of cooling technique of clinker cooler in the cement industry and the improvement of productivity in the paper/pulp industry. 360 figs., 62 tabs.

  11. Fiscal 2000 survey report on technological trends. Survey on trend of high-density energy beam technology concerning conservation of energy; 2000 nendo gijutsu doko nado chosa hokokusho. Energy shiyo gorika ni kakawaru komitsudo energy beam technology no doko chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    There is a possibility that machining technology using high-density energy beam will bring an epoch-making change to micro-nano area processing. In particular, a laser beam having high controllability is indispensable. This is a report of the fiscal 2000 survey. The survey was conducted on laser beam generation, control and nano-diagnostic techniques, micro-nano optics technologies and machining technologies, with the development problems and targets summarized. Laser beam generation/control technologies, which become the basic tools for micro-nano manufacturing, were investigated, as were inspection technologies for the purpose of checking the functions of nano structures created. Particularly, the investigation elucidated the significance of development of a femtosecond solid state laser based on a semiconductor laser and the control techniques of their phase. Further, necessity was emphasized in developing X-ray probing, infrared and terahertz spectroscopy which are essential for nano-diagnostic techniques. In optics technologies, the paper described the importance of photonic crystals which enable less-than-wavelength machining or electrical beam control using interference effect. The possibility of fabricating photocatalysts with nano-particles was also mentioned, as was the manufacturing of nano-functional structures. (NEDO)

  12. Fiscal 1998 research report (continued from the fiscal 1997 project). International survey project for rational energy use / Basic survey on efficient energy use in developing countries (Database construction project) / Survey on Japanese energy conservation technologies; 1998 nendo (1997 nendo jigyo kurikoshi) kokusai energy shiyo gorika nado chosa jigyo hatten tojokoku energy shohi koritsuka kiso chosa (database kochiku jigyo) chosa hokokusho. Nippon no sho energy gijutsu ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-02-01

    As a part of development of the energy conservation technology database, revision was made on 'Directory of Energy Conservation Technology in Japan' which was published to present the energy conservation technology of the Japanese energy-intensive industry to Asian countries in fiscal 1996. The previous directory was composed of 307 technical items, and 126 items among them were deleted and new 63 items were added through this revision. The technologies with energy conservation effects more than 10% were mainly selected by knowledge of the industrial members of the committee and other specialists. The energy conservation effect widely ranges from low-level one to high-level one, and the number of all the energy conservation technologies is enormous. Consequently, it should be considered that the applicable extent of the energy conservation technologies is dependent on the energy cost or economical situation of Japan and developing countries. (NEDO)

  13. Next-generation casting technologies and their adaptation and development in Russia: I. at the beginning of a new technological paradigm

    Science.gov (United States)

    Semenov, A. B.; Gavrilenko, A. E.; Semenov, B. I.

    2016-12-01

    The up-to-date methods of powder metallurgy and casting technology are considered. They can be used to apply the design and technological solutions that are intended to form parts with the optimum space configuration, to deLcrease the number of assembly elements, and to decrease the number of mechanical and welded joints in units.

  14. [Conservation Units.

    Science.gov (United States)

    Texas Education Agency, Austin.

    Each of the six instructional units deals with one aspect of conservation: forests, water, rangeland, minerals (petroleum), and soil. The area of the elementary school curriculum with which each correlates is indicated. Lists of general and specific objectives are followed by suggested teaching procedures, including ideas for introducing the…

  15. Creative conservation

    NARCIS (Netherlands)

    Bentham, Roelof J.

    1968-01-01

    The increasing exploitation of our natural resources, the unlimited occupation of ever more new areas, and the intensification of land-use, make it necessary for us to expand the concept of conservation. But we also need to reconsider that concept itself. For the changing conditions in the

  16. Reshaping conservation

    DEFF Research Database (Denmark)

    Funder, Mikkel; Danielsen, Finn; Ngaga, Yonika

    2013-01-01

    members strengthen the monitoring practices to their advantage, and to some extent move them beyond the reach of government agencies and conservation and development practitioners. This has led to outcomes that are of greater social and strategic value to communities than the original 'planned' benefits...

  17. Adaptive wing : Investigations of passive wing technologies for loads reduction in the cleansky smart fixed wing aircraft (SFWA) project

    NARCIS (Netherlands)

    Kruger, W.R.; Dillinger, J; De Breuker, R.; Reyes, M.; Haydn, K.

    2016-01-01

    In the work package “Adaptive Wing” in the Clean-Sky “Smart Fixed Wing Aircraft” (SFWA) project, design processes and solutions for aircraft wings have been created, giving optimal response with respect to loads, comfort and performance by the introduction of passive and active concepts. Central

  18. Spin-offs from laser ablation in art conservation

    Science.gov (United States)

    Asmus, J.; Elford, J.; Parfenov, V.

    2013-05-01

    decontamination, dermatology, nuclear weapons effects simulation, and graffiti control. It was readily apparent that the customary diffusion of advanced technologies from science and industry into the art conservation field had been reversed. In this paper we trace the migration and adaptation of radiation divestment developments in art conservation to numerous applications in science, industry, and consumer products. Examples described include the robotized hybrid "Flashjet" aircraft paint stripping system, the "Novotronic" anthrax remediation installation in the Pentagon Building, the InTa automated graffiti removal system employing a carbon dioxide TEA laser, the Bellalite body hair removal product incorporating flashlamp technology, and the Foodco line of optical radiation products for the sterilization of food products. The Foodco products are also applied to the sterilization and/or pasteurization of beverages and beverage containers. A similar device has been adapted to seafood irradiation in order to increase shelf life, as well as for the ablative removal of skin and scales. The Goodyear Tire and Rubber Company, to etch logos and identification information into the sidewalls of pneumatic tires, also developed a flashlamp-based ablation technology. The founders of the CYMER Corporation applied UV irradiation technology to the manufacture of high-performance integrated circuits (viz., memory chips, etc.) In several instances former CASS students and Visiting Fellows consciously adapted the above-learned art conservation methodologies to still other purposes. Thus, these examples of technology transfer may be termed: "Art in the service of Science." Alternatively, it is evident that many associated innovations developed from independent activities, unconnected serendipity, or through the normal diffusion of information and knowledge across disciplines.

  19. "Science Discovers, Genius Invents, Industry Applies, and Man Adapts Himself...": Some Thoughts on Human Autonomy, Law, and Technology

    Science.gov (United States)

    Chandler, Jennifer

    2010-01-01

    This short note considers the relationships between human autonomy, both individual and collective, and technology. At the collective level, numerous writers have observed the profound effects on society of technological discoveries--leading to the suggestion that societal mechanisms through which we might seek to make deliberate choices about…

  20. Effect of repeated ceramic firings on the marginal and internal adaptation of metal-ceramic restorations fabricated with different CAD-CAM technologies.

    Science.gov (United States)

    Kocaağaoğlu, Hasan; Albayrak, Haydar; Kilinc, Halil Ibrahim; Gümüs, Hasan Önder

    2017-11-01

    The use of computer-aided design and computer-aided manufacturing (CAD-CAM) for metal-ceramic restorations has increased with advances in the technology. However, little is known about the marginal and internal adaptation of restorations fabricated using laser sintering (LS) and soft milling (SM). Moreover, the effects of repeated ceramic firings on the marginal and internal adaptation of metal-ceramic restorations fabricated with LS and SM is also unknown. The purpose of this in vitro study was to investigate the effects of repeated ceramic firings on the marginal and internal adaptation of metal-ceramic copings fabricated using the lost wax (LW), LS, and SM techniques. Ten LW, 10 LS, and 10 SM cobalt-chromium (Co-Cr) copings were fabricated for an artificial tooth (Frasaco GmbH). After the application of veneering ceramic (VITA VMK Master; VITA Zahnfabrik), the marginal and internal discrepancies of these copings were measured with a silicone indicator paste and a stereomicroscope at ×100 magnification after the first, second, and third clinical simulated ceramic firing cycles. Repeated measures 2-way ANOVA and the Fisher LSD post hoc test were used to evaluate differences in marginal and internal discrepancies (α=.05). Neither fabrication protocol nor repeated ceramic firings had any statistically significant effect on internal discrepancy values (P>.05). Marginal discrepancy values were also statistically unaffected by repeated ceramic firings (P>.05); however, the fabrication protocol had a significant effect on marginal discrepancy values (Pmarginal discrepancy values than LS or SM (PMarginal discrepancy values did not vary between LS and SM (P>.05). All groups demonstrated clinically acceptable marginal adaptation after repeated ceramic firing cycles; however, the LS and SM groups demonstrated better marginal adaptation than that of LW group and may be appropriate clinical alternatives to LW. Copyright © 2017 Editorial Council for the Journal of

  1. Evaluation of Speech Recognition of Cochlear Implant Recipients Using Adaptive, Digital Remote Microphone Technology and a Speech Enhancement Sound Processing Algorithm.

    Science.gov (United States)

    Wolfe, Jace; Morais, Mila; Schafer, Erin; Agrawal, Smita; Koch, Dawn

    2015-05-01

    Cochlear implant recipients often experience difficulty with understanding speech in the presence of noise. Cochlear implant manufacturers have developed sound processing algorithms designed to improve speech recognition in noise, and research has shown these technologies to be effective. Remote microphone technology utilizing adaptive, digital wireless radio transmission has also been shown to provide significant improvement in speech recognition in noise. There are no studies examining the potential improvement in speech recognition in noise when these two technologies are used simultaneously. The goal of this study was to evaluate the potential benefits and limitations associated with the simultaneous use of a sound processing algorithm designed to improve performance in noise (Advanced Bionics ClearVoice) and a remote microphone system that incorporates adaptive, digital wireless radio transmission (Phonak Roger). A two-by-two way repeated measures design was used to examine performance differences obtained without these technologies compared to the use of each technology separately as well as the simultaneous use of both technologies. Eleven Advanced Bionics (AB) cochlear implant recipients, ages 11 to 68 yr. AzBio sentence recognition was measured in quiet and in the presence of classroom noise ranging in level from 50 to 80 dBA in 5-dB steps. Performance was evaluated in four conditions: (1) No ClearVoice and no Roger, (2) ClearVoice enabled without the use of Roger, (3) ClearVoice disabled with Roger enabled, and (4) simultaneous use of ClearVoice and Roger. Speech recognition in quiet was better than speech recognition in noise for all conditions. Use of ClearVoice and Roger each provided significant improvement in speech recognition in noise. The best performance in noise was obtained with the simultaneous use of ClearVoice and Roger. ClearVoice and Roger technology each improves speech recognition in noise, particularly when used at the same time

  2. Conservation of Charge and Conservation of Current

    OpenAIRE

    Eisenberg, Bob

    2016-01-01

    Conservation of current and conservation of charge are nearly the same thing: when enough is known about charge movement, conservation of current can be derived from conservation of charge, in ideal dielectrics, for example. Conservation of current is enforced implicitly in ideal dielectrics by theories that conserve charge. But charge movement in real materials like semiconductors or ionic solutions is never ideal. We present an apparently universal derivation of conservation of current and ...

  3. NASA/University JOint VEnture (JOVE) Program. VIXEN(tm): Object-Oriented, Technology-Adaptive, Virtual Information Exchange Environment

    Science.gov (United States)

    Anyiwo, Joshua C.

    2000-01-01

    Vixen is a collection of enabling technologies for uninhibited distributed object computing. In the Spring of 1995 when Vixen was proposed, it was an innovative idea very much ahead of its time. But today the technologies proposed in Vixen have become standard technologies for Enterprise Computing. Sun Microsystems J2EE/EJB specifications, among others, are independently proposed technologies of the Vixen type. I have brought Vixen completely under the J2EE standard in order to maximize interoperability and compatibility with other computing industry efforts. Vixen and the Enterprise JavaBean (EJB) Server technologies are now practically identical; OIL, another Vixen technology, and the Java Messaging System (JMS) are practically identical; and so on. There is no longer anything novel or patentable in the Vixen work performed under this grant. The above discussion, notwithstanding, my independent development of Vixen has significantly helped me, my university, my students and the local community. The undergraduate students who worked with me in developing Vixen have enhanced their expertise in what has become the cutting edge technology of their industry and are therefore well positioned for lucrative employment opportunities in the industry. My academic department has gained a new course: "Multi-media System Development", which provides a highly desirable expertise to our students for employment in any enterprise today. The many Outreach Programs that I conducted during this grant period have exposed local Middle School students to the contributions that NASA is making in our society as well as awakened desires in many such students for careers in Science and Technology. I have applied Vixen to the development of two software packages: (a) JAS: Joshua Application Server - which allows a user to configure an EJB Server to serve a J2EE compliant application over the world wide web; (b) PCM: Professor Course Manager: a J2EE compliant application for configuring a

  4. Leadership: a new frontier in conservation science.

    Science.gov (United States)

    Manolis, Jim C; Chan, Kai M; Finkelstein, Myra E; Stephens, Scott; Nelson, Cara R; Grant, Jacqualine B; Dombeck, Michael P

    2009-08-01

    Leadership is a critical tool for expanding the influence of conservation science, but recent advances in leadership concepts and practice remain underutilized by conservation scientists. Furthermore, an explicit conceptual foundation and definition of leadership in conservation science are not available in the literature. Here we drew on our diverse leadership experiences, our reading of leadership literature, and discussions with selected conservation science leaders to define conservation-science leadership, summarize an exploratory set of leadership principles that are applicable to conservation science, and recommend actions to expand leadership capacity among conservation scientists and practitioners. We define 2 types of conservation-science leadership: shaping conservation science through path-breaking research, and advancing the integration of conservation science into policy, management, and society at large. We focused on the second, integrative type of leadership because we believe it presents the greatest opportunity for improving conservation effectiveness. We identified 8 leadership principles derived mainly from the "adaptive leadership" literature: recognize the social dimension of the problem; cycle frequently through action and reflection; get and maintain attention; combine strengths of multiple leaders; extend your reach through networks of relationships; strategically time your effort; nurture productive conflict; and cultivate diversity. Conservation scientists and practitioners should strive to develop themselves as leaders, and the Society for Conservation Biology, conservation organizations, and academia should support this effort through professional development, mentoring, teaching, and research.

  5. Linkage of reproductive sciences: from 'quick fix' to 'integrated' conservation.

    Science.gov (United States)

    Wildt, D E; Ellis, S; Howard, J G

    2001-01-01

    Our laboratory has experienced four phases in understanding how the reproductive sciences contribute to genuine conservation of biodiversity. The first is the 'quick fix phase' in which the erroneous assumption is made that extant knowledge and techniques are readily adaptable to an unstudied wild animal to produce offspring rapidly. The second is the 'species-specificity phase' in which it is recognized that every species has evolved unique reproductive mechanisms that must be mastered before propagation can be enhanced. The third is the 'applicability phase' in which one grasps that all the new knowledge and technology are of minimal relevance without the cooperation of wildlife managers. The final phase is 'integration', the realization that reproduction is only one component in an abundantly complex conservation puzzle that requires interweaving many scientific disciplines with elaborate biopolitical, economic and habitat variables. These phases are illustrated using 20 years of experience with wildlife species, including the cheetah, black-footed ferret and giant panda. We conclude that the foremost value of the reproductive sciences for conserving endangered species is the discipline's powerful laboratory tools for understanding species-specific reproductive mechanisms. Such scholarly information, when applied holistically, can be used to improve management by natural or, occasionally, assisted breeding. Genuine conservation is achieved only when the reproductive knowledge and technologies are integrated into multidisciplinary programmes that preserve species integrity ex situ and preferably in situ.

  6. Energy mitigation, adaptation and biodiversity: Synergies and antagonisms

    International Nuclear Information System (INIS)

    Berry, P M; Paterson, J S

    2009-01-01

    In this paper we review the current impacts of different energy producers (and energy conservation) on biodiversity and investigate the potential for achieving positive biodiversity effects along with mitigation and adaptation objectives. Very few energy producers achieve all three aims - although it may be possible with careful choice of location and management. In some instances, energy conservation can provide mitigation, adaptation and biodiversity benefits. There is still a gap in knowledge regarding the effects of newer energy technologies on biodiversity. There is an additional concern that many supposedly 'green' renewable energy projects may actually harm biodiversity to such a degree that their overall human benefits are negated. The increasing understanding that ecosystem services are vital for human well-being though means that attempting positive mitigation, adaptation and biodiversity conservation in the energy sector should be an imperative goal for international policy. Whilst research into synergies between mitigation and adaptation is established, there has been very little that has examined the impacts on biodiversity as well. Further work is required to identify and provide evidence of the best ways of optimising mitigation, adaptation and biodiversity in the energy sector.

  7. Evolving conservation paradigms for the Anthropocene

    Science.gov (United States)

    Ariel E. Lugo

    2014-01-01

    The Anthropocene will have fundamental effects on the species composition, function, and structure of the ecosystems of the world. Land management agencies such as the USDA Forest Service will need to adapt their policies and conservation activities to avoid engaging in continuous conflict with natural processes and unfamiliar biotic assemblages. Conservation paradigms...

  8. Geographies of Conservation I: De-extinction and Precision Conservation

    OpenAIRE

    Adams, William Mark

    2016-01-01

    Extinction has long been a central concern in biodiversity conservation. Today, de-extinction offers interesting possibilities of restoring charismatic species and ecosystem function, but also risks and costs. Most de-extinction depends on genetic engineering and synthetic biology. These technologies are also proposed for use in ‘gene tweaking’ in wild species to enhance their chance of survival. Within conservation, the resulting debates pit an optimistic world of high-tech ‘precision con...

  9. Prerequisites for the development of the concept of health-forming technologies in the process of adaptive physical education of school-age children with hearing impairment

    Directory of Open Access Journals (Sweden)

    Vitaliy Kashuba

    2018-03-01

    Full Text Available Prerequisites for the development of the concept of health-forming technologies in the process of adaptive physical education of school-age children with hearing impairment Prerequisites for the development of the concept of health-forming technologies in the process of adaptive physical education of school-age children with hearing impairment National University of Physical Education and Sports of Ukraine, Kyiv. Actuality. The leading position of the contemporary issues of health-forming activity of children and youth presented in the form of a methodological basis for the formation of a positive motivation for a healthy lifestyle of the younger generation, especially with specific disabilities in the state of health, separates the central component of this process from the humanistic approach, the essence of which is creating a favorable situation for the readiness of the present youth to perceive and adequately respond to the educational activities of the school and social environment that are implemented in the process of their physical education. Objectives of the study: determination of priority directions of optimization of the process of physical education of students with hearing impairments, selection of rational means and methods that fully satisfy the specific needs of this contingent based on the study of their interests not only during physical education, but also correctional activities, self-organized motor activity Research results. The data obtained during the study showed that most children with hearing impairments understood the problems of their own health and had a desire to carry out activities aimed at improving their level, defining for themselves as the main criterion the physical state of their organism. The results of the questionnaire survey of 236 schoolchildren aged 13 to 19 years with different established hearing disorders supplemented the systematization of preconditions and scientifically substantiated the

  10. Soil Conservation Techniques for Hillside Farms. A Guide for Peace Corps Volunteers. Appropriate Technologies for Development. Peace Corps Information Collection & Exchange Reprint Series No. R-62.

    Science.gov (United States)

    Crozier, Carl

    This guide provides agricultural extensionists with basic information that will help them design plans for the conservation of soils and the management of water runoff in specific agricultural plots. It is based on experiences with small hillside farms in Honduras and takes into account the resources and constraints commonly encountered there.…

  11. Postharvest technologies for mangosteen (Garcinia mangostana L. conservation Tecnologias pós-colheita para conservação de mangostim (Garcinia mangostana L.

    Directory of Open Access Journals (Sweden)

    Maria Fernanda Pontes Penteado Moretzsohn de Castro

    2012-12-01

    Full Text Available The application of technologies to extend the postharvest life of mangosteen fruit was studied and compared to storage at 25 °C/70-75%R.H (25 °C control treatment. The fruits were packed in expanded polystyrene (EPS trays (5 fruits/tray. Five treatments were carried out at 13 °C/ 90-95% RH: application of carnauba wax coating, lecithin + CMC (carboxymethyl cellulose coating, 50 µm LDPE (low density polyethylene film coating, 13 µm PVC (Polyvinyl chloride, and non-coated sample (13 °C control treatment. Physicochemical analyses were performed twice a week. A statistical design was completely randomized with 8 repetitions for each treatment plus the control treatment. The results were submitted to variance analysis, and the averages compared by the Tukey test at 5% probability. Among the quality parameters analyzed, more significant differences were observed for weight loss, texture, and peel moisture content. The results showed that the maximum storage period for mangosteen at 25 °C is two weeks; while storage at13 °C can guarantee the conservation of this fruit for 25 days. Therefore, the treatment at 13 °C/90-95% RH without the use of coatings and films was more effective and economical.A aplicação de tecnologias visando extensão do período de conservação de frutos de mangostim foi estudada e comparada com o armazenamento a 25 °C/70-75%U.R. Os frutos foram colocados em bandejas de poliestireno (5 frutos/bandeja. Foram realizados cinco tratamentos a 13 °C/90-95%UR: cobertura de cera de carnaúba; cobertura com lecitina + CMC (Carboximetilcelulose; filme de PELBD (polietileno linear de baixa densidade 50 µm; PVC (Policloreto de vinila, e sem nenhuma cobertura ou revestimento. Foram realizadas análises físico-químicas duas vezes por semana. O delineamento estatístico empregado foi inteiramente casualizado com oito repetições para cada tratamento. Os resultados foram submetidos análise de variância e comparação de m

  12. Design and Numerical Analysis of a Novel Counter-Rotating Self-Adaptable Wave Energy Converter Based on CFD Technology

    Directory of Open Access Journals (Sweden)

    Chongfei Sun

    2018-03-01

    Full Text Available The lack of an efficient and reliable power supply is currently one of the bottlenecks restricting the practical application of unmanned ocean detectors. Wave energy is the most widely distributed ocean energy, with the obvious advantages of high energy density and predictability. In this paper, a novel wave energy converter (WEC for power supply of low-power unmanned ocean detectors is proposed, which is a small-scale counter-rotating self-adaptive point absorber-type WEC. The double-layer counter-rotating absorbers can achieve the torque balance of the whole device. Besides, the self-adaptation of the blade to the water flow can maintain a unidirectional continuous rotation of the single-layer absorber. The WEC has several advantages, including small occupied space, simple exchange process and convenient modular integration. It is expected to meet the power demand of low-power ocean detectors. Through modeling and CFD analysis, it was found that the power and efficiency characteristics of WEC are greatly influenced by the relative flow velocity, the blade angle of the absorber and the interaction between the upper and lower absorbers. A physical prototype of the WEC was made and some related experiments were conducted to verify the feasibility of WEC working principle and the reliability of CFD analysis.

  13. Automation and adaptation: Nurses’ problem-solving behavior following the implementation of bar coded medication administration technology

    Science.gov (United States)

    Holden, Richard J.; Rivera-Rodriguez, A. Joy; Faye, Héléne; Scanlon, Matthew C.; Karsh, Ben-Tzion

    2012-01-01

    The most common change facing nurses today is new technology, particularly bar coded medication administration technology (BCMA). However, there is a dearth of knowledge on how BCMA alters nursing work. This study investigated how BCMA technology affected nursing work, particularly nurses’ operational problem-solving behavior. Cognitive systems engineering observations and interviews were conducted after the implementation of BCMA in three nursing units of a freestanding pediatric hospital. Problem-solving behavior, associated problems, and goals, were specifically defined and extracted from observed episodes of care. Three broad themes regarding BCMA’s impact on problem solving were identified. First, BCMA allowed nurses to invent new problem-solving behavior to deal with pre-existing problems. Second, BCMA made it difficult or impossible to apply some problem-solving behaviors that were commonly used pre-BCMA, often requiring nurses to use potentially risky workarounds to achieve their goals. Third, BCMA created new problems that nurses were either able to solve using familiar or novel problem-solving behaviors, or unable to solve effectively. Results from this study shed light on hidden hazards and suggest three critical design needs: (1) ecologically valid design; (2) anticipatory control; and (3) basic usability. Principled studies of the actual nature of clinicians’ work, including problem solving, are necessary to uncover hidden hazards and to inform health information technology design and redesign. PMID:24443642

  14. Adaptive management

    DEFF Research Database (Denmark)

    Rist, Lucy; Campbell, Bruce Morgan; Frost, Peter

    2013-01-01

    Adaptive management (AM) emerged in the literature in the mid-1970s in response both to a realization of the extent of uncertainty involved in management, and a frustration with attempts to use modelling to integrate knowledge and make predictions. The term has since become increasingly widely used...... in scientific articles, policy documents and management plans, but both understanding and application of the concept is mixed. This paper reviews recent literature from conservation and natural resource management journals to assess diversity in how the term is used, highlight ambiguities and consider how...... the concept might be further assessed. AM is currently being used to describe many different management contexts, scales and locations. Few authors define the term explicitly or describe how it offers a means to improve management outcomes in their specific management context. Many do not adhere to the idea...

  15. Limitations of science and adapting to Nature

    International Nuclear Information System (INIS)

    Narasimhan, T N

    2007-01-01

    Historically, science has pursued a premise that Nature can be understood fully, its future predicted precisely, and its behavior controlled at will. However, emerging knowledge indicates that the nature of Earth and biological systems transcends the limits of science, questioning the premise of knowing, prediction, and control. This knowledge has led to the recognition that, for civilized human survival, technological society has to adapt to the constraints of these systems. Simultaneously, spurred by explosive developments in the understanding of materials (non-biological and biological), applied scientific research pursues a contrary goal of controlling the material world, with the promise of spectacular economic growth and human well-being. If adaptation to Nature is so important, why does applied research pursue a contrary course? Adapting to Nature requires a recognition of the limitations of science, and espousal of human values. Although the concept of adapting to Nature is accepted by some, especially conservation ecologists, such an acceptance may not exist in other fields. Also, in a world dominated by democratic ideals of freedom and liberty, the discipline required for adapting to Nature may often be overridden by competition among various segments of society to exercise their respective rights. In extreme cases of catastrophic failure of Earth or biological systems, the imperative for adaptation may fall victim to instinct for survival. In essence, although adequate scientific know-how and technological competence exists to facilitate adaptation to Nature, choosing between that and the pursuit of controlling Nature entails human judgment. What that choice may be when humans have to survive under severe environmental stress cannot be predicted

  16. Limitations of science and adapting to Nature

    Energy Technology Data Exchange (ETDEWEB)

    Narasimhan, T N [Department of Materials Science and Engineering, Department of Environmental Science, Policy and Management, 210 Hearst Memorial Mining Building, University of California, Berkeley, CA 94720-1760 (United States)

    2007-07-15

    Historically, science has pursued a premise that Nature can be understood fully, its future predicted precisely, and its behavior controlled at will. However, emerging knowledge indicates that the nature of Earth and biological systems transcends the limits of science, questioning the premise of knowing, prediction, and control. This knowledge has led to the recognition that, for civilized human survival, technological society has to adapt to the constraints of these systems. Simultaneously, spurred by explosive developments in the understanding of materials (non-biological and biological), applied scientific research pursues a contrary goal of controlling the material world, with the promise of spectacular economic growth and human well-being. If adaptation to Nature is so important, why does applied research pursue a contrary course? Adapting to Nature requires a recognition of the limitations of science, and espousal of human values. Although the concept of adapting to Nature is accepted by some, especially conservation ecologists, such an acceptance may not exist in other fields. Also, in a world dominated by democratic ideals of freedom and liberty, the discipline required for adapting to Nature may often be overridden by competition among various segments of society to exercise their respective rights. In extreme cases of catastrophic failure of Earth or biological systems, the imperative for adaptation may fall victim to instinct for survival. In essence, although adequate scientific know-how and technological competence exists to facilitate adaptation to Nature, choosing between that and the pursuit of controlling Nature entails human judgment. What that choice may be when humans have to survive under severe environmental stress cannot be predicted.

  17. Evaluation of optical data gained by ARAMIS-measurement of abdominal wall movements for an anisotropic pattern design of stress-adapted hernia meshes produced by embroidery technology

    Science.gov (United States)

    Breier, A.; Bittrich, L.; Hahn, J.; Spickenheuer, A.

    2017-10-01

    For the sustainable repair of abdominal wall hernia the application of hernia meshes is required. One reason for the relapse of hernia after surgery is seen in an inadequate adaption of the mechanical properties of the mesh to the movements of the abdominal wall. Differences in the stiffness of the mesh and the abdominal tissue cause tension, friction and stress resulting in a deficient tissue response and subsequently in a recurrence of a hernia, preferentially in the marginal area of the mesh. Embroidery technology enables a targeted influence on the mechanical properties of the generated textile structure by a directed thread deposition. Textile parameters like stitch density, alignment and angle can be changed easily and locally in the embroidery pattern to generate a space-resolved mesh with mechanical properties adapted to the requirement of the surrounding tissue. To determine those requirements the movements of the abdominal wall and the resulting distortions need to be known. This study was conducted to gain optical data of the abdominal wall movements by non-invasive ARAMIS-measurement on 39 test persons to estimate direction and value of the major strains.

  18. The Precision Problem in Conservation and Restoration.

    Science.gov (United States)

    Hiers, J Kevin; Jackson, Stephen T; Hobbs, Richard J; Bernhardt, Emily S; Valentine, Leonie E

    2016-11-01

    Within the varied contexts of environmental policy, conservation of imperilled species populations, and restoration of damaged habitats, an emphasis on idealized optimal conditions has led to increasingly specific targets for management. Overly-precise conservation targets can reduce habitat variability at multiple scales, with unintended consequences for future ecological resilience. We describe this dilemma in the context of endangered species management, stream restoration, and climate-change adaptation. Inappropriate application of conservation targets can be expensive, with marginal conservation benefit. Reduced habitat variability can limit options for managers trying to balance competing objectives with limited resources. Conservation policies should embrace habitat variability, expand decision-space appropriately, and support adaptation to local circumstances to increase ecological resilience in a rapidly changing world. Copyright © 2016 Elsevier Ltd. All rights reserved.

  19. The precision problem in conservation and restoration

    Science.gov (United States)

    Hiers, J. Kevin; Jackson, Stephen T.; Hobbs, Richard J.; Bernhardt, Emily S.; Valentine, Leonie E.

    2016-01-01

    Within the varied contexts of environmental policy, conservation of imperilled species populations, and restoration of damaged habitats, an emphasis on idealized optimal conditions has led to increasingly specific targets for management. Overly-precise conservation targets can reduce habitat variability at multiple scales, with unintended consequences for future ecological resilience. We describe this dilemma in the context of endangered species management, stream restoration, and climate-change adaptation. Inappropriate application of conservation targets can be expensive, with marginal conservation benefit. Reduced habitat variability can limit options for managers trying to balance competing objectives with limited resources. Conservation policies should embrace habitat variability, expand decision-space appropriately, and support adaptation to local circumstances to increase ecological resilience in a rapidly changing world.

  20. A mature industrial solution for ITER divertor plasma facing components: hypervapotron cooling concept adapted to Tore Supra flat tile technology

    Energy Technology Data Exchange (ETDEWEB)

    Escourbiac, F.; Missirlian, M.; Schlosser, J. [Association EURATOM-CEA Cadarache, Departement de Recherches sur la Fusion Controlee, 13 - Saint Paul lez Durance (France); Bobin-Vastra, I. [AREVA Centre Technique de Framatome, 71 - Le Creusot (France); Kuznetsov, V. [Efremov Institute, Doroga na Metallostroy, St. Petersburg (Russian Federation); Schedler, B. [Plansee AG, Reutte (Austria)

    2004-07-01

    The use of flat tile technology to handle heat fluxes in the range of 20 MW/m{sup 2} with components relevant for fusion experiment applications is technically possible with the hypervapotron cooling concept. This paper deals with recent high heat flux performances operated with success on 2 identical mock-ups, based on this concept, that were tested in 2 different electron gun facilities. Each mock-up consisted of a CuCrZr heat sink armored with 25 flat tiles of the 3D carbon fibre composite material SEPcarb NS31 assembled with pure copper by active metal casting (AMC). The AMC tiles were electron beam welded on the CuCrZr bar, fins and slots on the neutral beam JET design were machined into the bar, then the bar was closed with a thick CuCrZr rear plug including hydraulic connections then the bar was electron beam welded onto the sidewalls. The testing results show that full ITER design specifications were achieved with margins, the critical heat flux limit was even higher than 30 MW/m{sup 2}. These results highlight the high potential of this technology for ITER divertor application.

  1. A mature industrial solution for ITER divertor plasma facing components: hypervapotron cooling concept adapted to Tore Supra flat tile technology

    International Nuclear Information System (INIS)

    Escourbiac, F.; Missirlian, M.; Schlosser, J.; Bobin-Vastra, I.; Kuznetsov, V.; Schedler, B.

    2004-01-01

    The use of flat tile technology to handle heat fluxes in the range of 20 MW/m 2 with components relevant for fusion experiment applications is technically possible with the hypervapotron cooling concept. This paper deals with recent high heat flux performances operated with success on 2 identical mock-ups, based on this concept, that were tested in 2 different electron gun facilities. Each mock-up consisted of a CuCrZr heat sink armored with 25 flat tiles of the 3D carbon fibre composite material SEPcarb NS31 assembled with pure copper by active metal casting (AMC). The AMC tiles were electron beam welded on the CuCrZr bar, fins and slots on the neutral beam JET design were machined into the bar, then the bar was closed with a thick CuCrZr rear plug including hydraulic connections then the bar was electron beam welded onto the sidewalls. The testing results show that full ITER design specifications were achieved with margins, the critical heat flux limit was even higher than 30 MW/m 2 . These results highlight the high potential of this technology for ITER divertor application

  2. Adaptive Leadership in Digital Transformation

    DEFF Research Database (Denmark)

    Hansen, Anne Mette; Kræmmergaard, Pernille; Mathiassen, Lars

    2012-01-01

    Leaders’ ability to quickly adapt IT practices is especially critical in today’s increasingly turbulent environment with frequent changes in the competitive and technological landscape. However, developing such adaptive leadership is a difficult and complex process. Often, underlying assumptions...

  3. 3D-printed adaptive acoustic lens as a disruptive technology for transcranial ultrasound therapy using single-element transducers

    Science.gov (United States)

    Maimbourg, Guillaume; Houdouin, Alexandre; Deffieux, Thomas; Tanter, Mickael; Aubry, Jean-François

    2018-01-01

    The development of multi-element arrays for better control of the shape of ultrasonic beams has opened the way for focusing through highly aberrating media, such as the human skull. As a result, the use of brain therapy with transcranial-focused ultrasound has rapidly grown. Although effective, such technology is expensive. We propose a disruptive, low-cost approach that consists of focusing a 1 MHz ultrasound beam through a human skull with a single-element transducer coupled with a tailored silicone acoustic lens cast in a 3D-printed mold and designed using computed tomography-based numerical acoustic simulation. We demonstrate on N  =  3 human skulls that adding lens-based aberration correction to a single-element transducer increases the deposited energy on the target 10 fold.

  4. The Need to Adapt to New Financial Accounting Technologies Information in the Context of Global Economic Crisis

    Directory of Open Access Journals (Sweden)

    Enrique BONSON-PONTE

    2010-12-01

    Full Text Available Today, accounting is a necessity and not a desire. Concerns for the improvement of accounting practices are necessary, especially in Romania, where these activities are strengthened with the progress of the Romanian economy integration into the structures of the European Union. This paper carried an objective analysis of how the web report is now being made by financial and accounting information, presents the disadvantages of this approach to reporting introduced, but the potential benefits that could be created by the rapid adoption of international standards for reporting financial information website, too. At the same time, the paper tries to create new opportunities as soon as possible regarding the adoption of intelligent technologies, which, coupled with language Web reporting financial information.

  5. Technology.

    Science.gov (United States)

    Online-Offline, 1998

    1998-01-01

    Focuses on technology, on advances in such areas as aeronautics, electronics, physics, the space sciences, as well as computers and the attendant progress in medicine, robotics, and artificial intelligence. Describes educational resources for elementary and middle school students, including Web sites, CD-ROMs and software, videotapes, books,…

  6. Corporate Energy Conservation Program for Alcoa North American Extrusions: Office of Industrial Technologies (OIT) Aluminum BestPractices Management Case Study

    Energy Technology Data Exchange (ETDEWEB)

    U.S. Department of Energy

    2001-08-06

    This case study is the latest in a series on industrial firms who are implementing energy efficient technologies and system improvements into their manufacturing processes. The case studies document the activities, savings, and lessons learned on these projects.

  7. Corporate Energy Conservation Program for Alcoa North American Extrusions: Office of Industrial Technologies (OIT) Aluminum BestPractices Management Case Study

    International Nuclear Information System (INIS)

    2001-01-01

    This case study is the latest in a series on industrial firms who are implementing energy efficient technologies and system improvements into their manufacturing processes. The case studies document the activities, savings, and lessons learned on these projects

  8. Leveraging open-source technology and adapting open eLearning content to improve the knowledge and motivation of Ghana’s rural nurses

    Directory of Open Access Journals (Sweden)

    Lisa Mwaikambo

    2016-03-01

    Full Text Available Access to training opportunities is strongly correlated with health workers’ motivation because it enables health workers to take on more challenging duties. Mobile technology can be leveraged for professional development support by providing access to open education resources. Community Health Nurses (CHNs in Ghana are the frontline health workers of the Ghana Health Service (GHS and play a vital role in extending maternal and child health care to rural communities. However, as the lowest credentialed nurses, they are at the bottom of the GHS hierarchy. CHNs have limited opportunities for career advancement and report challenges with isolation and lack of resources. Leveraging open-source technology platforms and open eLearning content, the Care Community Hub (CCH project sought to address these barriers in CHN motivation by developing and deploying a mobile application (app, CHN on the Go, to CHNs in five rural districts. The app supports CHNs through tools for continuous learning, diagnostic decision-making, and improved nurse-supervisor interactions. This paper focuses on the adaptation and use of the open eLearning content to address CHNs’ motivation challenges and, ultimately, improve their knowledge and job performance as a result of having access to open education resources.

  9. Making conservation work for everyone

    Energy Technology Data Exchange (ETDEWEB)

    Wiersma, J. [Veridian Corp., Ajax, ON (Canada)

    2004-07-01

    This presentation discussed the economic value of conservation, the optimal deployment of energy conservation. A sample load profile was presented to demonstrate how much electricity the average residential customer uses on a summer day. The average customer does not have the tools to understand the financial consequences of conservation for different types of equipment at different times of the day. Smart metering technology could help in this regard. Accurate unsubsidized prices are also considered to be the best incentive to conserve because customers will reduce electricity use when the prices are high. It was also suggested that standards for new appliances should be increased effectively to their economic value. The enablers to energy conservation include solid consumer education programs, real time metering in places where it is cost effective, real time pricing in places where it is practical, and power rates that reflect real costs. Barriers to energy conservation include the residual economic advantage that may be insufficient to justify investment; support from local distribution companies and transmission companies if the lost revenue adjustment mechanism (LRAM) is not sufficient to recover lost revenue and if LDCs are not sufficiently involved in the design of the electricity conservation program. 7 figs.

  10. Changing teaching techniques and adapting new technologies to improve student learning in an introductory meteorology and climate course

    Directory of Open Access Journals (Sweden)

    E. M. Cutrim

    2006-01-01

    Full Text Available Responding to the call for reform in science education, changes were made in an introductory meteorology and climate course offered at a large public university. These changes were a part of a larger project aimed at deepening and extending a program of science content courses that model effective teaching strategies for prospective middle school science teachers. Therefore, revisions were made to address misconceptions about meteorological phenomena, foster deeper understanding of key concepts, encourage engagement with the text, and promote inquiry-based learning. Techniques introduced include: use of a flash cards, student reflection questionnaires, writing assignments, and interactive discussions on weather and forecast data using computer technology such as Integrated Data Viewer (IDV. The revision process is described in a case study format. Preliminary results (self-reflection by the instructor, surveys of student opinion, and measurements of student achievement, suggest student learning has been positively influenced. This study is supported by three grants: NSF grant No. 0202923, the Unidata Equipment Award, and the Lucia Harrison Endowment Fund.

  11. Successfully Adapting to Change.

    Science.gov (United States)

    Baird, James R.

    1989-01-01

    Describes methods used to successfully adapt to reductions in budget allocations in the University of Utah's Instructional Media Services Department. Three main areas of concern are addressed: morale and staff development; adapting to change in the areas of funding, control, media priorities, and technology; and planning for the future. (LRW)

  12. Seismic Technology Adapted to Analyzing and Developing Geothermal Systems Below Surface-Exposed High-Velocity Rocks Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Hardage, Bob A. [Univ. of Texas, Austin, TX (United States). Bureau of Economic Geology; DeAngelo, Michael V. [Univ. of Texas, Austin, TX (United States). Bureau of Economic Geology; Ermolaeva, Elena [Univ. of Texas, Austin, TX (United States). Bureau of Economic Geology; Hardage, Bob A. [Univ. of Texas, Austin, TX (United States). Bureau of Economic Geology; Remington, Randy [Univ. of Texas, Austin, TX (United States). Bureau of Economic Geology; Sava, Diana [Univ. of Texas, Austin, TX (United States). Bureau of Economic Geology; Wagner, Donald [Univ. of Texas, Austin, TX (United States). Bureau of Economic Geology; Wei, Shuijion [Univ. of Texas, Austin, TX (United States). Bureau of Economic Geology

    2013-02-01

    The objective of our research was to develop and demonstrate seismic data-acquisition and data-processing technologies that allow geothermal prospects below high-velocity rock outcrops to be evaluated. To do this, we acquired a 3-component seismic test line across an area of exposed high-velocity rocks in Brewster County, Texas, where there is high heat flow and surface conditions mimic those found at numerous geothermal prospects. Seismic contractors have not succeeded in creating good-quality seismic data in this area for companies who have acquired data for oil and gas exploitation purposes. Our test profile traversed an area where high-velocity rocks and low-velocity sediment were exposed on the surface in alternating patterns that repeated along the test line. We verified that these surface conditions cause non-ending reverberations of Love waves, Rayleigh waves, and shallow critical refractions to travel across the earth surface between the boundaries of the fast-velocity and slow-velocity material exposed on the surface. These reverberating surface waves form the high level of noise in this area that does not allow reflections from deep interfaces to be seen and utilized. Our data-acquisition method of deploying a box array of closely spaced geophones allowed us to recognize and evaluate these surface-wave noise modes regardless of the azimuth direction to the surface anomaly that backscattered the waves and caused them to return to the test-line profile. With this knowledge of the surface-wave noise, we were able to process these test-line data to create P-P and SH-SH images that were superior to those produced by a skilled seismic data-processing contractor. Compared to the P-P data acquired along the test line, the SH-SH data provided a better detection of faults and could be used to trace these faults upward to the boundaries of exposed surface rocks. We expanded our comparison of the relative value of S-wave and P-wave seismic data for geothermal

  13. Quantifying the Adaptive Cycle.

    Directory of Open Access Journals (Sweden)

    David G Angeler

    Full Text Available The adaptive cycle was proposed as a conceptual model to portray patterns of change in complex systems. Despite the model having potential for elucidating change across systems, it has been used mainly as a metaphor, describing system dynamics qualitatively. We use a quantitative approach for testing premises (reorganisation, conservatism, adaptation in the adaptive cycle, using Baltic Sea phytoplankton communities as an example of such complex system dynamics. Phytoplankton organizes in recurring spring and summer blooms, a well-established paradigm in planktology and succession theory, with characteristic temporal trajectories during blooms that may be consistent with adaptive cycle phases. We used long-term (1994-2011 data and multivariate analysis of community structure to assess key components of the adaptive cycle. Specifically, we tested predictions about: reorganisation: spring and summer blooms comprise distinct community states; conservatism: community trajectories during individual adaptive cycles are conservative; and adaptation: phytoplankton species during blooms change in the long term. All predictions were supported by our analyses. Results suggest that traditional ecological paradigms such as phytoplankton successional models have potential for moving the adaptive cycle from a metaphor to a framework that can improve our understanding how complex systems organize and reorganize following collapse. Quantifying reorganization, conservatism and adaptation provides opportunities to cope with the intricacies and uncertainties associated with fast ecological change, driven by shifting system controls. Ultimately, combining traditional ecological paradigms with heuristics of complex system dynamics using quantitative approaches may help refine ecological theory and improve our understanding of the resilience of ecosystems.

  14. Energy conservation applications of microprocessors

    Energy Technology Data Exchange (ETDEWEB)

    Shih, James Y.

    1979-07-01

    A survey of the application of microprocessors for industrial and commercial energy conservation has been made. Microprocessor applications for HVAC, chiller control, and automotive equipment are discussed. A case study of successful replacement of a conventional cooling plant control is recounted. The rapid advancement of microelectronic technology will affect efficient energy control, more sophisticated control methodology, and more investment in controls.

  15. Adaptive Wireless Transceiver, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Wireless technologies are an increasingly attractive means for spatial data, input, manipulation, and distribution. Mobitrum is proposing an innovative Adaptive...

  16. Adaptation of the Austrian biogas technology to suit conditions in developing countries in the tropical zone. Final report. Adaptierung der oesterreichischen Biogastechnologie an Gegebenheiten in Entwicklungslaendern in der tropischen Zone. Endbericht

    Energy Technology Data Exchange (ETDEWEB)

    Padinger, R

    1984-04-01

    Within the framework of the objective project 'Adaptation of the Austrian biogas technology to suit conditions in developing countries in the tropical zone' and using the example of the planning for a biogas installation on the Cape Verde Islands, a record was made of experience gained in achieving optimum technology transfer and from which recommendations are made for the implementation of further development aid projects in the biogas sector. (orig./EF).

  17. A adaptação do técnico de radiologia às novas tecnologias The adaptation of the radiologic technician to new technologies

    Directory of Open Access Journals (Sweden)

    Célia Maria Ferreira Felício

    2010-02-01

    Full Text Available OBJETIVO: Pretendeu-se avaliar a capacidade de adaptação dos técnicos de radiologia às novas tecnologias, avaliar os fatores relacionados com o processo de implementação das novas tecnologias e conhecer algumas vantagens e desvantagens identificadas pelos técnicos de radiologia. MATERIAIS E MÉTODOS: Tratou-se de um estudo descritivo e transversal. Os dados foram recolhidos através de um questionário estruturado em quatro componentes - caracterização da amostra, avaliação da opinião acerca das novas tecnologias, escala de satisfação com a utilização de sistemas de informação, e a escala de avaliação geral dos sistemas de informação -, tendo sido garantidos o anonimato e a confidencialidade dos dados. Participaram neste estudo 58 técnicos de radiologia a exercer funções em instituições hospitalares da região de Trás-os-Montes e Alto Douro, Portugal. RESULTADOS: Os resultados obtidos permitiram-nos constatar que a totalidade dos técnicos afirma que a nova tecnologia é vista como uma ferramenta de trabalho com utilidade para a sua atividade profissional, sendo que as vantagens da implementação das novas tecnologias refletem-se na facilidade de acesso ao arquivo radiológico do usuário, na diminuição da perda de informação, na rapidez de execução dos exames e no rigor dos registros do usuário. CONCLUSÃO: Podemos dizer, de uma maneira geral, que os técnicos de radiologia se adaptaram de uma forma muito satisfatória às novas tecnologias implementadas nos seus departamentos.OBJECTIVE: The present study was aimed at evaluating radiologic technicians' capacity to adapt to new technologies, besides investigating which factors could be related to the implementation of new technologies and to identify some of its possible advantages and disadvantages as well. MATERIALS AND METHODS: The present descriptive and cross-sectional study evaluated data collected by means of a structured questionnaire divided into four

  18. Technology

    Directory of Open Access Journals (Sweden)

    Xu Jing

    2016-01-01

    Full Text Available The traditional answer card reading method using OMR (Optical Mark Reader, most commonly, OMR special card special use, less versatile, high cost, aiming at the existing problems proposed a method based on pattern recognition of the answer card identification method. Using the method based on Line Segment Detector to detect the tilt of the image, the existence of tilt image rotation correction, and eventually achieve positioning and detection of answers to the answer sheet .Pattern recognition technology for automatic reading, high accuracy, detect faster

  19. [Adaptive optics for ophthalmology].

    Science.gov (United States)

    Saleh, M

    2016-04-01

    Adaptive optics is a technology enhancing the visual performance of an optical system by correcting its optical aberrations. Adaptive optics have already enabled several breakthroughs in the field of visual sciences, such as improvement of visual acuity in normal and diseased eyes beyond physiologic limits, and the correction of presbyopia. Adaptive optics technology also provides high-resolution, in vivo imaging of the retina that may eventually help to detect the onset of retinal conditions at an early stage and provide better assessment of treatment efficacy. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

  20. [Quantitative evaluation of printing accuracy and tissue surface adaptation of mandibular complete denture polylactic acid pattern fabricated by fused deposition modeling technology].

    Science.gov (United States)

    Deng, K H; Wang, Y; Chen, H; Zhao, Y J; Zhou, Y S; Sun, Y C

    2017-06-09

    Objective: To quantitatively evaluate the adaptation of polylactic acid (PLA) pattern of mandibular complete denture fabricated by fused deposition modeling (FDM) technology. Methods: A mandibular complete denture digital model was designed through a complete denture design software based on a pair of standard maxillomandibular edentulous plaster model and their occlusion bases. Ten PLA mandibular complete dentures were printed with a FDM machine. The dentures were scanned with and without the plaster model using a three-dimensional (3D) scanner. In Geomagic software, the scanning data of printed dentures were registered to its computer aided design (CAD) data, and the printing error was analyzed using the multipoint registration command. For quantitatively evaluating the adaptation of the denture, the data of plaster model and PLA denture were registered to the whole data of denture located in the plaster model using the best-fit alignment command, the 3D deviation of the plaster model and tissue surface of the denture represent the space between them. The overall area was separated into three parts: primary stress-bearing area, secondary stress-bearing area and border seal area, and the average deviations of these three parts were measured. The values were analyzed using analysis of variance. Results: Compared with the CAD data, the printing error was (0.013±0.004) mm. The overall 3D deviation between PLA denture and plaster model was (0.164±0.033) mm, in which the primary stress-bearing area was (0.165± 0.045) mm, the secondary stress-bearing area was (0.153 ± 0.027) mm, the border seal area was (0.186 ± 0.043) mm. These showed a good fit in the majority parts of the FDM denture to the plaster model. No statistically significant difference was observed between the three areas ( F =1.857, P =0.175>0.05). Conclusions: Combined with the 3D scanning, CAD and FDM technology, a FDM 3D printing process of complete denture for injection moulding can be established

  1. Decision support frameworks and tools for conservation

    Science.gov (United States)

    Schwartz, Mark W.; Cook, Carly N.; Pressey, Robert L.; Pullin, Andrew S.; Runge, Michael C.; Salafsky, Nick; Sutherland, William J.; Williamson, Matthew A.

    2018-01-01

    The practice of conservation occurs within complex socioecological systems fraught with challenges that require transparent, defensible, and often socially engaged project planning and management. Planning and decision support frameworks are designed to help conservation practitioners increase planning rigor, project accountability, stakeholder participation, transparency in decisions, and learning. We describe and contrast five common frameworks within the context of six fundamental questions (why, who, what, where, when, how) at each of three planning stages of adaptive management (project scoping, operational planning, learning). We demonstrate that decision support frameworks provide varied and extensive tools for conservation planning and management. However, using any framework in isolation risks diminishing potential benefits since no one framework covers the full spectrum of potential conservation planning and decision challenges. We describe two case studies that have effectively deployed tools from across conservation frameworks to improve conservation actions and outcomes. Attention to the critical questions for conservation project planning should allow practitioners to operate within any framework and adapt tools to suit their specific management context. We call on conservation researchers and practitioners to regularly use decision support tools as standard practice for framing both practice and research.

  2. Influences of Contrasting Types of Training on Practitioners' and Parents' Use of Assistive Technology and Adaptations with Infants, Toddlers and Preschoolers with Disabilities. Practical Evaluation Reports, Volume 3, Number 1

    Science.gov (United States)

    Dunst, Carl J.; Trivette, Carol M.; Meter, Diana; Hamby, Deborah W.

    2011-01-01

    The effectiveness of different types of practices for promoting practitioner and parent adoption of different kinds of assistive technology and adaptations with young children birth to 105 months of age was the focus of a meta-analysis. Six operationally defined adult learning method characteristics and between 2 and 5 practices for each…

  3. Tanzania Journal of Forestry and Nature Conservation

    African Journals Online (AJOL)

    The Tanzania Journal of Forestry and Nature Conservation accommodates the current diverse and multidisciplinary approaches towards ecosystem conservation at national and global levels. The journal is published biannually and accepts research and review papers covering technological, physical, biological, social and ...

  4. Gender differences in farmers' responses to climate change adaptation in Yongqiao District, China.

    Science.gov (United States)

    Jin, Jianjun; Wang, Xiaomin; Gao, Yiwei

    2015-12-15

    This study examines the gender differences in farmers' responses to climate change adaption in Yongqiao District, China. A random sampling technique was used to select 220 household heads, while descriptive statistics and binary logit models were used to analyze the data obtained from the households. We determine that male and female respondents are not significantly different in their knowledge and perceptions of climate change, but there is a gender difference in adopting climate change adaptation measures. Male-headed households are more likely to adopt new technology for water conservation and to increase investment in irrigation infrastructure. The research also indicates that the adaptation decisions of male and female heads are influenced by different sets of factors. The findings of this research help to elucidate the determinants of climate change adaptation decisions for male and female-headed households and the strategic interventions necessary for effective adaptation. Copyright © 2015 Elsevier B.V. All rights reserved.

  5. Transforming conservation science and practice for a postnormal world.

    Science.gov (United States)

    Colloff, Matthew J; Lavorel, Sandra; van Kerkhoff, Lorrae E; Wyborn, Carina A; Fazey, Ioan; Gorddard, Russell; Mace, Georgina M; Foden, Wendy B; Dunlop, Michael; Prentice, I Colin; Crowley, John; Leadley, Paul; Degeorges, Patrick

    2017-10-01

    We examine issues to consider when reframing conservation science and practice in the context of global change. New framings of the links between ecosystems and society are emerging that are changing peoples' values and expectations of nature, resulting in plural perspectives on conservation. Reframing conservation for global change can thus be regarded as a stage in the evolving relationship between people and nature rather than some recent trend. New models of how conservation links with transformative adaptation include how decision contexts for conservation can be reframed and integrated with an adaptation pathways approach to create new options for global-change-ready conservation. New relationships for conservation science and governance include coproduction of knowledge that supports social learning. New processes for implementing adaptation for conservation outcomes include deliberate practices used to develop new strategies, shift world views, work with conflict, address power and intergenerational equity in decisions, and build consciousness and creativity that empower agents to act. We argue that reframing conservation for global change requires scientists and practitioners to implement approaches unconstrained by discipline and sectoral boundaries, geopolitical polarities, or technical problematization. We consider a stronger focus on inclusive creation of knowledge and the interaction of this knowledge with societal values and rules is likely to result in conservation science and practice that meets the challenges of a postnormal world. © 2017 The Authors. Conservation Biology published by Wiley Periodicals, Inc. on behalf of Society for Conservation Biology.

  6. Evolving GIS technologies in nature conservation and the spatial planning strategy of Tara NP (Serbia as a potential UNECSO MAB reserve

    Directory of Open Access Journals (Sweden)

    Radović Dejan

    2008-01-01

    Full Text Available Mt. Tara NP was nominated in 2004 within the UNESCO - ROSTE programme, for Man and the Biosphere (MAB Reserve status in Serbia as transboundary 'Peace Park' status between Serbia and Bosnia & Herzegovina. Mt. Tara is one of the most important centres of Balkans and European ecosystems and species diversity. They represent a unique example of well preserved forests in south eastern Europe with numerous endemic and relict species of flora and fauna. In this floristic diversity of Mt Tara of the greatest interest is the Serbian (Pančić's spruce Picea omorika. Mt. Tara NP is characterized by specific geomorphologic, hydrologic, geologic, soil and climatic features. The geographical information system (GIS that we have created has proved an excellent tool for the spatial planning strategy in assessment and conservation of all natural characteristics of Mt. Tara NP, and is helpful to Park management for sustainable use of landscape resources. GIS of Mt. Tara NP includes data on natural, artificial and management themes.

  7. Adaptivity in GRAPPLE: Adaptation in any way you like (Poster)

    NARCIS (Netherlands)

    De Bra, P.M.E.; Smits, D.; Pechenizkiy, M.; Vasilyeva, E.; Bonk, C.J.; et al., xx

    2008-01-01

    GRAPPLE is an EU funded IST FP7 project that brings together a group of researchers into adaptive learning technology and environments and developers of learning management systems (LMSs), in order to offer adaptive learning as a standard feature of future LMSs. This paper presents the adaptation

  8. Adaptive infrared-reflecting systems inspired by cephalopods

    Science.gov (United States)

    Xu, Chengyi; Stiubianu, George T.; Gorodetsky, Alon A.

    2018-03-01

    Materials and systems that statically reflect radiation in the infrared region of the electromagnetic spectrum underpin the performance of many entrenched technologies, including building insulation, energy-conserving windows, spacecraft components, electronics shielding, container packaging, protective clothing, and camouflage platforms. The development of their adaptive variants, in which the infrared-reflecting properties dynamically change in response to external stimuli, has emerged as an important unmet scientific challenge. By drawing inspiration from cephalopod skin, we developed adaptive infrared-reflecting platforms that feature a simple actuation mechanism, low working temperature, tunable spectral range, weak angular dependence, fast response, stability to repeated cycling, amenability to patterning and multiplexing, autonomous operation, robust mechanical properties, and straightforward manufacturability. Our findings may open opportunities for infrared camouflage and other technologies that regulate infrared radiation.

  9. Drum rotor blowers in EC technology. Energy conservation, comfortable control, low noise; Trommellaeufer-Ventilatoren in EC-Technik. Energieersparnis, komfortable Regelung und geringe Geraeuschentwicklung

    Energy Technology Data Exchange (ETDEWEB)

    Sigloch, U. [ebm-papst Mulfingen GmbH und Co. KG (Germany). Projektmanagement Vertrieb Europa; Reiff, E.C. [Redaktionsbuero Stutensee (Germany)

    2008-07-01

    Compact drum rotor blowers with forward-curved blades are quite common in air conditioning and ventilation because of their high efficiency and compact dimensions. They are found in air conditioner boxes, in air current systems in department stores, or in fan coils in hotel rooms, wherever other types of blowers would be too big. Until recently, EC technology was not available for the blower motors so the users had do accept low efficiency and the poor control options of conventional AC drives. This has changed by now. (orig.)

  10. Development of unutilized biomass potentials in forestry and landscape conservation. Logistical challenges and potential uses of innovative telematics technologies and services

    Energy Technology Data Exchange (ETDEWEB)

    Erhardt, I; Waesche, M [Fraunhofer Institute for Factory Operation and Automation IFF, Magdeburg (Germany)

    2006-07-01

    Among other things, the heterogeneity of the types, quantities and numbers of potential sources and sinks as well as the means of transportation used continue to make it difficult to describe as a whole logistics processes for developing raw material in forest and field, especially for the wood processing industry, or for recovering renewable energies. Conventional methods of logistics controlling and measurement only capture these processes incompletely and partially. Innovative developments in the field of mobile information technologies are opening tremendous potentials for improving logistics processes. Taking into account the multitude of national and international standards and guidelines in this field, catchphrases such as location based services or LBS and radio frequency identification or RFID already stand for effective and practicable solutions in traditional fields of application for logistics. Building upon RFID and telematic trends and applications in classical fields of logistics, this paper presents current successes and addresses further needs in the forestry and wood processing industries as well as related sectors. The following theses are put forth for discussion: The use of RFID and telematics must guarantee a quantifiable benefit for everyone involved in a process. The development of a broader range of solutions customized for individual cases and preconfigured will help the technology to a breakthrough more than striving for the universal solution will. Standardization is a fundamental prerequisite to user acceptance in general and investment protection, particularly for smaller enterprises. (orig.)

  11. Using perceptions as evidence to improve conservation and environmental management.

    Science.gov (United States)

    Bennett, Nathan James

    2016-06-01

    The conservation community is increasingly focusing on the monitoring and evaluation of management, governance, ecological, and social considerations as part of a broader move toward adaptive management and evidence-based conservation. Evidence is any information that can be used to come to a conclusion and support a judgment or, in this case, to make decisions that will improve conservation policies, actions, and outcomes. Perceptions are one type of information that is often dismissed as anecdotal by those arguing for evidence-based conservation. In this paper, I clarify the contributions of research on perceptions of conservation to improving adaptive and evidence-based conservation. Studies of the perceptions of local people can provide important insights into observations, understandings and interpretations of the social impacts, and ecological outcomes of conservation; the legitimacy of conservation governance; and the social acceptability of environmental management. Perceptions of these factors contribute to positive or negative local evaluations of conservation initiatives. It is positive perceptions, not just objective scientific evidence of effectiveness, that ultimately ensure the support of local constituents thus enabling the long-term success of conservation. Research on perceptions can inform courses of action to improve conservation and governance at scales ranging from individual initiatives to national and international policies. Better incorporation of evidence from across the social and natural sciences and integration of a plurality of methods into monitoring and evaluation will provide a more complete picture on which to base conservation decisions and environmental management. © 2016 Society for Conservation Biology.

  12. Reflections Around the Conservation of Sacred Thangkas

    Directory of Open Access Journals (Sweden)

    Sabine Cotte

    2013-10-01

    Full Text Available Tibetan thangkas (Buddhist scroll paintings are created as religious ritual objects. The fact that they are mainly considered as artworks in the Western world impacts on the decisions made for their display and conservation. This article explores the current approach to thangkas in Australian public collections and compares it with the views of contemporary Tibetan Buddhism practitioners. It underlines a few misconceptions at the source of conservation decision-making, and discusses practical outcomes of integrating the sacred dimension into professional practice against the backdrop of conservation’s Codes of Ethics. Conserving living religious heritage requires that professional ethical standards are adaptable to the needs of users. Existing frameworks for the conservation of sacred objects of pre-colonised, indigenous cultures provide useful models for the conservation of thangkas. This article argues that engaging with contemporary cultural groups to conserve religious significance is part of the mission of conservators. This is viewed as an expansion of conservation practice into the social realm, in a search for purposeful conservation that establishes the social relevance of our profession.

  13. Geography of conservation spending, biodiversity, and culture.

    Science.gov (United States)

    McClanahan, T R; Rankin, P S

    2016-10-01

    We used linear and multivariate models to examine the associations between geography, biodiversity, per capita economic output, national spending on conservation, governance, and cultural traits in 55 countries. Cultural traits and social metrics of modernization correlated positively with national spending on conservation. The global distribution of this spending culture was poorly aligned with the distribution of biodiversity. Specifically, biodiversity was greater in the tropics where cultures tended to spend relatively less on conservation and tended to have higher collectivism, formalized and hierarchical leadership, and weaker governance. Consequently, nations lacking social traits frequently associated with modernization, environmentalism, and conservation spending have the largest component of Earth's biodiversity. This has significant implications for setting policies and priorities for resource management given that biological diversity is rapidly disappearing and cultural traits change slowly. Therefore, we suggest natural resource management adapt to and use characteristics of existing social organization rather than wait for or promote social values associated with conservation spending. Supporting biocultural traditions, engaging leaders to increase conservation commitments, cross-national efforts that complement attributes of cultures, and avoiding interference with nature may work best to conserve nature in collective and hierarchical societies. Spending in modernized nations may be a symbolic response to a symptom of economic development and environmental degradation, and here conservation actions need to ensure that biodiversity is not being lost. © 2016 Society for Conservation Biology.

  14. Conservation potential of agricultural water conservation subsidies

    Science.gov (United States)

    Huffaker, Ray

    2008-07-01

    A current policy subsidizes farmers to invest in improved on-farm irrigation efficiency, expecting water to be conserved off farm. Contrary to expectation, water has been increasingly depleted in some regions after such improvements. This paper investigates the policy's failure to conserve water consistently by (1) formulating an economic model of irrigated crop production to determine a profit-maximizing irrigator's range of responses to a subsidy and (2) embedding these responses into hypothetical streamflow diagrams to ascertain their potential to conserve water under various hydrologic regimes. Testable hypotheses are developed to predict the conservation potential of a subsidy in real-world application.

  15. Reproductive science as an essential component of conservation biology.

    Science.gov (United States)

    Holt, William V; Brown, Janine L; Comizzoli, Pierre

    2014-01-01

    In this chapter we argue that reproductive science in its broadest sense has never been more important in terms of its value to conservation biology, which itself is a synthetic and multidisciplinary topic. Over recent years the place of reproductive science in wildlife conservation has developed massively across a wide and integrated range of cutting edge topics. We now have unprecedented insight into the way that environmental change affects basic reproductive functions such as ovulation, sperm production, pregnancy and embryo development through previously unsuspected influences such as epigenetic modulation of the genome. Environmental change in its broadest sense alters the quality of foodstuffs that all animals need for reproductive success, changes the synchrony between breeding seasons and reproductive events, perturbs gonadal and embryo development through the presence of pollutants in the environment and drives species to adapt their behaviour and phenotype. In this book we explore many aspects of reproductive science and present wide ranging and up to date accounts of the scientific and technological advances that are currently enabling reproductive science to support conservation biology.

  16. Overview on the Role of Advance Genomics in Conservation Biology of Endangered Species

    Directory of Open Access Journals (Sweden)

    Suliman Khan

    2016-01-01

    Full Text Available In the recent era, due to tremendous advancement in industrialization, pollution and other anthropogenic activities have created a serious scenario for biota survival. It has been reported that present biota is entering a “sixth” mass extinction, because of chronic exposure to anthropogenic activities. Various ex situ and in situ measures have been adopted for conservation of threatened and endangered plants and animal species; however, these have been limited due to various discrepancies associated with them. Current advancement in molecular technologies, especially, genomics, is playing a very crucial role in biodiversity conservation. Advance genomics helps in identifying the segments of genome responsible for adaptation. It can also improve our understanding about microevolution through a better understanding of selection, mutation, assertive matting, and recombination. Advance genomics helps in identifying genes that are essential for fitness and ultimately for developing modern and fast monitoring tools for endangered biodiversity. This review article focuses on the applications of advanced genomics mainly demographic, adaptive genetic variations, inbreeding, hybridization and introgression, and disease susceptibilities, in the conservation of threatened biota. In short, it provides the fundamentals for novice readers and advancement in genomics for the experts working for the conservation of endangered plant and animal species.

  17. Overview on the Role of Advance Genomics in Conservation Biology of Endangered Species.

    Science.gov (United States)

    Khan, Suliman; Nabi, Ghulam; Ullah, Muhammad Wajid; Yousaf, Muhammad; Manan, Sehrish; Siddique, Rabeea; Hou, Hongwei

    2016-01-01

    In the recent era, due to tremendous advancement in industrialization, pollution and other anthropogenic activities have created a serious scenario for biota survival. It has been reported that present biota is entering a "sixth" mass extinction, because of chronic exposure to anthropogenic activities. Various ex situ and in situ measures have been adopted for conservation of threatened and endangered plants and animal species; however, these have been limited due to various discrepancies associated with them. Current advancement in molecular technologies, especially, genomics, is playing a very crucial role in biodiversity conservation. Advance genomics helps in identifying the segments of genome responsible for adaptation. It can also improve our understanding about microevolution through a better understanding of selection, mutation, assertive matting, and recombination. Advance genomics helps in identifying genes that are essential for fitness and ultimately for developing modern and fast monitoring tools for endangered biodiversity. This review article focuses on the applications of advanced genomics mainly demographic, adaptive genetic variations, inbreeding, hybridization and introgression, and disease susceptibilities, in the conservation of threatened biota. In short, it provides the fundamentals for novice readers and advancement in genomics for the experts working for the conservation of endangered plant and animal species.

  18. Tapir health and conservation medicine.

    Science.gov (United States)

    Mangini, Paulo Rogerio; Medici, Emilia Patrícia; Fernandes-Santos, Renata Carolina

    2012-12-01

    Tapirs have unique nutritional needs, as well as anatomical, physiological, behavioral and ecological adaptations that must be considered when managing their health, both in the wild and in captivity. Information about how tapirs live in their natural habitats can provide crucial knowledge to prevent many of the health problems found in captivity such as infectious and parasitic diseases, reproductive issues and nutritional and behavioral disorders. Likewise, proper management in captivity can significantly contribute to in situ conservation programs. Conservation medicine is a science created to address the global health crisis that jeopardizes biodiversity causing imbalances among ecosystem, human, animal and vegetal health. In this context, common threats to tapir health and conservation, such as isolated and small populations surrounded by human activity, chemical pollution, domestic animals and their pathogenic agents, need to be better understood. This manuscript provides information about the health of tapirs both in captivity and in the wild and aims to encourage tapir conservationists worldwide to gather information about pathogen and disease dynamics and manifestation, as well as implications for tapir conservation. © 2012 Wiley Publishing Asia Pty Ltd, ISZS and IOZ/CAS.

  19. Integration of environmental flow assessment and freshwater conservation planning: a new era in catchment management

    CSIR Research Space (South Africa)

    Nel, JL

    2011-03-01

    Full Text Available Integrated water resources management offers an ideal platform for addressing the goals of freshwater conservation and climate change adaptation. Environmental flow assessment and systematic conservation planning have evolved separately...

  20. China's brick history and conservation

    DEFF Research Database (Denmark)

    Shu, C. X.; Cantisani, E.; Fratini, F.

    2017-01-01

    . This study focuses on Shanghai as a representative city in that transitional period, aims at addressing the true condition of the modern changes in China's brick history and the heritage today. The paper presents the first results of an interdisciplinary investigation. Fourteen brick samples and one sample...... critical issues: the provenance of the bricks, the hitherto undocumented changes in the manufacturing technology, and the condition of the brick material in terms of conservation....

  1. Unusual evolutionary conservation and further species-specific adaptations of a large family of nonclassical MHC class Ib genes across different degrees of genome ploidy in the amphibian subfamily Xenopodinae.

    Science.gov (United States)

    Edholm, Eva-Stina; Goyos, Ana; Taran, Joseph; De Jesús Andino, Francisco; Ohta, Yuko; Robert, Jacques

    2014-06-01

    Nonclassical MHC class Ib (class Ib) genes are a family of highly diverse and rapidly evolving genes wherein gene numbers, organization, and expression markedly differ even among closely related species rendering class Ib phylogeny difficult to establish. Whereas among mammals there are few unambiguous class Ib gene orthologs, different amphibian species belonging to the anuran subfamily Xenopodinae exhibit an unusually high degree of conservation among multiple class Ib gene lineages. Comparative genomic analysis of class Ib gene loci of two divergent (~65 million years) Xenopodinae subfamily members Xenopus laevis (allotetraploid) and Xenopus tropicalis (diploid) shows that both species possess a large cluster of class Ib genes denoted as Xenopus/Silurana nonclassical (XNC/SNC). Our study reveals two distinct phylogenetic patterns among these genes: some gene lineages display a high degree of flexibility, as demonstrated by species-specific expansion and contractions, whereas other class Ib gene lineages have been maintained as monogenic subfamilies with very few changes in their nucleotide sequence across divergent species. In this second category, we further investigated the XNC/SNC10 gene lineage that in X. laevis is required for the development of a distinct semi-invariant T cell population. We report compelling evidence of the remarkable high degree of conservation of this gene lineage that is present in all 12 species of the Xenopodinae examined, including species with different degrees of ploidy ranging from 2, 4, 8 to 12 N. This suggests that the critical role of XNC10 during early T cell development is conserved in amphibians.

  2. 7 CFR 1466.10 - Conservation practices.

    Science.gov (United States)

    2010-01-01

    ... prior to application for assistance. (d) Where new technologies or management approaches that provide a high potential for optimizing environmental benefits have been developed, NRCS may approve interim conservation practice standards that incorporate the new technologies and provide financial assistance for...

  3. FY 2000 survey report on the project for preparation of the international energy utilization rationalization basis. 1st volume. Survey/study for the spread of energy conservation technology; 2000 nendo chosa hokokusho. Kokusai energy shiyo gorika kiban seibi jigyo (Sho energy gijutsu no fukyu no tameno chosa kenkyu to - 1)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    In China which is the largest energy consumption country in the Asian region and has much room for the spread of energy conservation technology, investigational study was made with the aim of widely spreading energy conservation technology and solving environmental problems. To grasp energy supply/demand in China, environmental problems, industrial structure and social system, it is necessary to have process for establishment of data monitoring method, construction of database and model simulation. Proposal for model simulation was made. Further, to make macro-basis assessment of potentiality of energy conservation and environmental effect by sector in China, following the previous fiscal year, study was made on the electric power industry, where there is big potentiality of heightening energy utilization efficiency but the rationalization is not proceeded with. Moreover, in this fiscal year, energy demand is expected to increase with the growing economy, and the traffic field which has a great effect on the environment was added to the investigational research. (NEDO)

  4. Model project for enhancing energy consumption efficiency in developing countries. Report on changes of energy conservation technology and environmental protection technology in the chemical industry of Japan; Hatten tojokoku energy shohi koritsuka model jigyo. Nippon kagaku kogyo ni okeru sho energy gijutsu to kankyo taisaku gijutsu no hensen hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the purpose of contributing to the economic growth and the global environmental protection in the Asian area, an investigation was carried out into energy conservation technology and environmental protection technology in the chemical industry of Japan. Measures for energy conservation are shifting from those which do not cost so much such as reduction in excess air rate of the heating furnace, and reduction in reflux ratio of the distillation tower to those with equipment investment such as waste heat recovery of the heating furnace and waste heat recovery of the distillation tower. In the 1980s, the utilization of low temperature waste heat by absorption type refrigerator and heat pump was promoted and the energy utilization efficiency by computer control was enhanced. Concerning environmental measures, the following were carried out: installation of the flue gas desulfurization device and reconstruction of high-rise stack, reduction of NOx by combustion control, smoke/dust disposal of electrostatic precipitator, combustion of hydrocarbon causing photochemical oxidant, catalytic oxidation, condensation, treatment by activated carbon, activated sludge treatment for BOD/COD, diaphragm process for dimethylmercury, ion exchange resin process, etc. 21 refs., 29 figs., 27 tabs.

  5. The Adaptation Finance Gap Report

    DEFF Research Database (Denmark)

    UNEP’s Adaptation Gap Report series focuses on Finance, Technology and Knowledge gaps in climate change adaptation. It compliments the Emissions Gap Report series, and explores the implications of failing to close the emissions gap. The report builds on a 2014 assessment by the United Nations...... Environment Programme (UNEP), which laid out the concept of ‘adaptation gaps’ and outlined three such gaps: technology, finance and knowledge. The 2016 Adaptation Gap Report assesses the difference between the financial costs of adapting to climate change in developing countries and the amount of money...... actually available to meet these costs – a difference known as the “adaptation finance gap”. Like the 2014 report, the 2016 report focuses on developing countries, where adaptation capacity is often the lowest and needs the highest, and concentrates on the period up to 2050. The report identifies trends...

  6. Adaptive Education.

    Science.gov (United States)

    Anderson, Lorin W.

    1979-01-01

    Schools have devised several ways to adapt instruction to a wide variety of student abilities and needs. Judged by criteria for what adaptive education should be, most learning for mastery programs look good. (Author/JM)

  7. Fiscal 2000 international energy use rationalization measures project. International energy consumption efficiency improvement technology diffusion project - Green helmet project (Thailand: Report on heating furnace energy conservation seminar); 2000 nendo. Kokusai energy shiyo gorika to taisaku jigyo, Kokusai energy shohi koritsuka to gijutsu fukyu jigyo, Green helmet jigyo (Thai : kanetsuro shoenergy seminar hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The above-named seminar was held in Bangkok, Thailand, on January 30, 2001, and covered three kinds of industries of ceramics, glass, and aluminum. Approximately 200 people attended the meeting, consisting of NEDO (New Energy and Industrial Technology Development Organization)-affiliated people and 16 lecturers from Japan, and Thai participants. The seminar comprised a 'keynote address' and 'lectures on engineering' that aimed at the three industries as a whole, and 'lectures on engineering' and 'cases and activities for energy conservation' that aimed, respectively, at the three industries. Lectures were delivered on operating technologies which were already in practical use and on state-of-the-art technologies. The keynote address, entitled 'Global warming prevention and industrial furnaces,' covered the results of the 'High-performance industrial furnace field test project.' The lectures on engineering dealt with the 'instrumentation control system' and 'heat insulation technology' which were basic technologies for energy conservation and 'diagnosis technology and practice' which aimed at the enhancement of energy conservation after the start of operation. Questions and answers were earnestly exchanged. (NEDO)

  8. Harnessing genomics for delineating conservation units.

    Science.gov (United States)

    Funk, W Chris; McKay, John K; Hohenlohe, Paul A; Allendorf, Fred W

    2012-09-01

    Genomic data have the potential to revolutionize the delineation of conservation units (CUs) by allowing the detection of adaptive genetic variation, which is otherwise difficult for rare, endangered species. In contrast to previous recommendations, we propose that the use of neutral versus adaptive markers should not be viewed as alternatives. Rather, neutral and adaptive markers provide different types of information that should be combined to make optimal management decisions. Genetic patterns at neutral markers reflect the interaction of gene flow and genetic drift that affects genome-wide variation within and among populations. This population genetic structure is what natural selection operates on to cause adaptive divergence. Here, we provide a new framework to integrate data on neutral and adaptive markers to protect biodiversity. Copyright © 2012 Elsevier Ltd. All rights reserved.

  9. Adapting a Markov Monte Carlo simulation model for forecasting the number of Coronary Artery Revascularisation Procedures in an era of rapidly changing technology and policy

    Directory of Open Access Journals (Sweden)

    Knuiman Matthew

    2008-06-01

    Full Text Available Abstract Background Treatments for coronary heart disease (CHD have evolved rapidly over the last 15 years with considerable change in the number and effectiveness of both medical and surgical treatments. This period has seen the rapid development and uptake of statin drugs and coronary artery revascularization procedures (CARPs that include Coronary Artery Bypass Graft procedures (CABGs and Percutaneous Coronary Interventions (PCIs. It is difficult in an era of such rapid change to accurately forecast requirements for treatment services such as CARPs. In a previous paper we have described and outlined the use of a Markov Monte Carlo simulation model for analyzing and predicting the requirements for CARPs for the population of Western Australia (Mannan et al, 2007. In this paper, we expand on the use of this model for forecasting CARPs in Western Australia with a focus on the lack of adequate performance of the (standard model for forecasting CARPs in a period during the mid 1990s when there were considerable changes to CARP technology and implementation policy and an exploration and demonstration of how the standard model may be adapted to achieve better performance. Methods Selected key CARP event model probabilities are modified based on information relating to changes in the effectiveness of CARPs from clinical trial evidence and an awareness of trends in policy and practice of CARPs. These modified model probabilities and the ones obtained by standard methods are used as inputs in our Markov simulation model. Results The projected numbers of CARPs in the population of Western Australia over 1995–99 only improve marginally when modifications to model probabilities are made to incorporate an increase in effectiveness of PCI procedures. However, the projected numbers improve substantially when, in addition, further modifications are incorporated that relate to the increased probability of a PCI procedure and the reduced probability of a CABG

  10. Adapting a Markov Monte Carlo simulation model for forecasting the number of coronary artery revascularisation procedures in an era of rapidly changing technology and policy.

    Science.gov (United States)

    Mannan, Haider R; Knuiman, Matthew; Hobbs, Michael

    2008-06-25

    Treatments for coronary heart disease (CHD) have evolved rapidly over the last 15 years with considerable change in the number and effectiveness of both medical and surgical treatments. This period has seen the rapid development and uptake of statin drugs and coronary artery revascularization procedures (CARPs) that include Coronary Artery Bypass Graft procedures (CABGs) and Percutaneous Coronary Interventions (PCIs). It is difficult in an era of such rapid change to accurately forecast requirements for treatment services such as CARPs. In a previous paper we have described and outlined the use of a Markov Monte Carlo simulation model for analyzing and predicting the requirements for CARPs for the population of Western Australia (Mannan et al, 2007). In this paper, we expand on the use of this model for forecasting CARPs in Western Australia with a focus on the lack of adequate performance of the (standard) model for forecasting CARPs in a period during the mid 1990s when there were considerable changes to CARP technology and implementation policy and an exploration and demonstration of how the standard model may be adapted to achieve better performance. Selected key CARP event model probabilities are modified based on information relating to changes in the effectiveness of CARPs from clinical trial evidence and an awareness of trends in policy and practice of CARPs. These modified model probabilities and the ones obtained by standard methods are used as inputs in our Markov simulation model. The projected numbers of CARPs in the population of Western Australia over 1995-99 only improve marginally when modifications to model probabilities are made to incorporate an increase in effectiveness of PCI procedures. However, the projected numbers improve substantially when, in addition, further modifications are incorporated that relate to the increased probability of a PCI procedure and the reduced probability of a CABG procedure stemming from changed CARP preference

  11. Soil conservation practices among Arable Crop Farmers In Enugu ...

    African Journals Online (AJOL)

    Soil conservation practices among Arable Crop Farmers In Enugu – North Agricultural Zone, Nigeria: Implications for Climate Change. ... The paper recommends concerted efforts to promote among farmers the conservation practices that aid mitigation and adaptation to climate change and at the same time enhance ...

  12. Comprendre le processus d'adaptation des demarches d'enseignement en classe de sciences et technologies a l'ecole secondaire: Analyse des besoins percus par les personnes enseignantes en milieu defavorise

    Science.gov (United States)

    Houde, Sylvie

    Since the implementation of the latest reform in the education programs of Quebec, the adaptation of teaching has taken on an important place in the concerns of all actors in education. However, this adjustment towards the adoption of teaching practices that require more participation on the part of the pupil is not accomplished so easily, particularly in the field of science and technology (ST). In order to gain a better understanding of these processes of adaptation, it is opportune to question ourselves on the factors and dynamics of interest at stake, especially in disadvantaged environments. Such environments are faced with situations where other difficulties coexist: integration of pupils, lack of interest, problems in classroom management, multi-ethnicity, etc. As a result, such difficulties give rise to particular limitations, expressed in the form of needs, by pupils and teachers, likely to have a restrictive effect on the adaptation of teaching practices. Accordingly, our research focuses on the needs perceived by teachers in high school ST classrooms in disadvantaged school environments, since they present a privileged means to better understand the processes involved in the adaptation of practices. The adoption of an ecosystemic perspective, centered on these needs and their contribution towards the dynamics of decision-making, enabled us to better apprehend the complexity of these processes in ST classrooms. We were able to identify the needs perceived by teachers by following the methodology of conceptanalysis of needs, and by combining focus groups with the DRAP software. The results account for the large variety of needs to be considered in the equation of adaptation of teaching practices. These needs generally belong to the classroom system (microsystem). For pupils, they are mainly cognitive needs, but for teachers, they pertain to organization and structure. The influence of these needs on the adaptation processes depends on the interpretation by

  13. Conservation policies and planning under climate change

    DEFF Research Database (Denmark)

    Strange, Niels; Thorsen, Bo Jellesmark; Bladt, Jesper Stentoft

    2011-01-01

    Biodiversity conservation policies focus on securing the survival of species and habitats according to their current distribution. This basic premise may be inappropriate for halting biodiversity decline under the dynamic changes caused by climate change. This study explores a dynamic spatial...... conservation prioritization problem where climate change gradually changes the future habitat suitability of a site’ current species. This has implications for survival probability, as well as for species that potentially immigrate to the site. The problem is explored using a set of heuristics for both of two...... distributions as the basis of decision rules can be crucial for ensuring the effectiveness of conservation plans. Finally, it is discussed how more adaptive strategies, that allow for the redirection of resources from protected sites to privately-owned sites, may increase the effectiveness of the conservation...

  14. Conservation: Toward firmer ground

    Science.gov (United States)

    1975-01-01

    The following aspects of energy conservation were reviewed in order to place the problems in proper perspective: history and goals, conservation accounting-criteria, and a method to overcome obstacles. The effect of changing prices and available supplies of energy sources and their causes on consumption levels during the last few decades were described. Some examples of attainable conservation goals were listed and justified. A number of specific criteria applicable to conservation accounting were given. Finally, a discussion was presented to relate together the following aspects of energy conservation: widespread impact, involvement of government, industry, politics, moral and ethical aspects, urgency and time element.

  15. Using the Technology Acceptance Model to explore community dwelling older adults' perceptions of a 3D interior design application to facilitate pre-discharge home adaptations.

    Science.gov (United States)

    Money, Arthur G; Atwal, Anita; Young, Katherine L; Day, Yasmin; Wilson, Lesley; Money, Kevin G

    2015-08-26

    In the UK occupational therapy pre-discharge home visits are routinely carried out as a means of facilitating safe transfer from the hospital to home. Whilst they are an integral part of practice, there is little evidence to demonstrate they have a positive outcome on the discharge process. Current issues for patients are around the speed of home visits and the lack of shared decision making in the process, resulting in less than 50 % of the specialist equipment installed actually being used by patients on follow-up. To improve practice there is an urgent need to examine other ways of conducting home visits to facilitate safe discharge. We believe that Computerised 3D Interior Design Applications (CIDAs) could be a means to support more efficient, effective and collaborative practice. A previous study explored practitioners perceptions of using CIDAs; however it is important to ascertain older adult's views about the usability of technology and to compare findings. This study explores the perceptions of community dwelling older adults with regards to adopting and using CIDAs as an assistive tool for the home adaptations process. Ten community dwelling older adults participated in individual interactive task-focused usability sessions with a customised CIDA, utilising the think-aloud protocol and individual semi-structured interviews. Template analysis was used to carry out both deductive and inductive analysis of the think-aloud and interview data. Initially, a deductive stance was adopted, using the three pre-determined high-level themes of the technology acceptance model (TAM): Perceived Usefulness (PU), Perceived Ease of Use (PEOU), Actual Use (AU). Inductive template analysis was then carried out on the data within these themes, from which a number of sub-thmes emerged. Regarding PU, participants believed CIDAs served as a useful visual tool and saw clear potential to facilitate shared understanding and partnership in care delivery. For PEOU, participants were

  16. Website quality elements and online shopper behaviour: adapting the unified theory of acceptance and use of technology to fashion retailers' websites

    OpenAIRE

    Cavallero, Luisa

    2016-01-01

    JEL: M31 Marketing JEL: L81 Retail and Wholesale Trade; e-Commerce Companies in the fashion industry are increasingly establishing their presence online, in the form of online platforms, such as websites. However, some brands are more successful than others in selling fashion clothing online. In this perspective, the two main objectives of the dissertation are: (i) to adapt and extend the UTAUT model in the context of online shopping for fashion clothing; (ii) to compare the adapted mod...

  17. Adaptive Lighting

    DEFF Research Database (Denmark)

    Petersen, Kjell Yngve; Søndergaard, Karin; Kongshaug, Jesper

    2015-01-01

    Adaptive Lighting Adaptive lighting is based on a partial automation of the possibilities to adjust the colour tone and brightness levels of light in order to adapt to people’s needs and desires. IT support is key to the technical developments that afford adaptive control systems. The possibilities...... offered by adaptive lighting control are created by the ways that the system components, the network and data flow can be coordinated through software so that the dynamic variations are controlled in ways that meaningfully adapt according to people’s situations and design intentions. This book discusses...... differently into an architectural body. We also examine what might occur when light is dynamic and able to change colour, intensity and direction, and when it is adaptive and can be brought into interaction with its surroundings. In short, what happens to an architectural space when artificial lighting ceases...

  18. Is It Time for Synthetic Biodiversity Conservation?

    Science.gov (United States)

    Piaggio, Antoinette J; Segelbacher, Gernot; Seddon, Philip J; Alphey, Luke; Bennett, Elizabeth L; Carlson, Robert H; Friedman, Robert M; Kanavy, Dona; Phelan, Ryan; Redford, Kent H; Rosales, Marina; Slobodian, Lydia; Wheeler, Keith

    2017-02-01

    Evidence indicates that, despite some critical successes, current conservation approaches are not slowing the overall rate of biodiversity loss. The field of synthetic biology, which is capable of altering natural genomes with extremely precise editing, might offer the potential to resolve some intractable conservation problems (e.g., invasive species or pathogens). However, it is our opinion that there has been insufficient engagement by the conservation community with practitioners of synthetic biology. We contend that rapid, large-scale engagement of these two communities is urgently needed to avoid unintended and deleterious ecological consequences. To this point we describe case studies where synthetic biology is currently being applied to conservation, and we highlight the benefits to conservation biologists from engaging with this emerging technology. Published by Elsevier Ltd.

  19. Lasers in the Conservation of Artworks

    CERN Document Server

    Nimmrichter, Johann; Schreiner, Manfred; LACONA VI Proceedings

    2007-01-01

    Within the last decades, the use of lasers in artworks conservation became an important tool for many conservators, scientists, architects and other experts, who are involved in the care of monuments and artefacts or laser technology. For the first time in 1995 Professor Costas Fotakis brought together restorers and scientists to discuss the potential of lasers in art conservation. Since then the field of "Lasers in the Conservation of Artworks" has gained enormously in importance. Nowadays restorers and laser scientists work close together in order to develop new fields of applications during the last years. Furthermore a large number of national and international research projects have been carried out by conservator-restorers, architects and scientists. In the last 10 years a number of historical and artistic high quality monuments (e.g. St. Stephens Cathedral in Vienna) have been cleaned or measured by laser and brought the laser in the spectra of tools which are useful in the sensible field of artworks. ...

  20. Conservation Action Planning: Lessons learned from the St. Marys River watershed biodiversity conservation planning process

    Science.gov (United States)

    Patterson, Tamatha A.; Grundel, Ralph

    2014-01-01

    Conservation Action Planning (CAP) is an adaptive management planning process refined by The Nature Conservancy (TNC) and embraced worldwide as the Open Standards for the Practice of Conservation. The CAP process facilitates open, multi-institutional collaboration on a common conservation agenda through organized actions and quantified results. While specifically designed for conservation efforts, the framework is adaptable and flexible to multiple scales and can be used for any collaborative planning effort. The CAP framework addresses inception; design and development of goals, measures, and strategies; and plan implementation and evaluation. The specific components of the CAP include defining the project scope and conservation targets; assessing the ecological viability; ascertaining threats and surrounding situation; identifying opportunities and designing strategies for action; and implementing actions and monitoring results. In 2007, TNC and a multidisciplinary graduate student team from the University of Michigan's School of Natural Resources and Environment initiated a CAP for the St. Marys River, the connecting channel between Lake Superior and Lake Huron, and its local watershed. The students not only gained experience in conservation planning, but also learned lessons that notably benefited the CAP process and were valuable for any successful collaborative effort—a dedicated core team improved product quality, accelerated the timeline, and provided necessary support for ongoing efforts; an academic approach in preparation for engagement in the planning process brought applicable scientific research to the forefront, enhanced workshop facilitation, and improved stakeholder participation; and early and continuous interactions with regional stakeholders improved cooperation and built a supportive network for collaboration.

  1. Genetic conservation and paddlefish propagation

    Science.gov (United States)

    Sloss, Brian L.; Klumb, Robert A.; Heist, Edward J.

    2009-01-01

    The conservation of genetic diversity of our natural resources is overwhelmingly one of the central foci of 21st century management practices. Three recommendations related to the conservation of paddlefish Polyodon spathula genetic diversity are to (1) identify genetic diversity at both nuclear and mitochondrial DNA loci using a suggested list of 20 sampling locations, (2) use genetic diversity estimates to develop genetic management units, and (3) identify broodstock sources to minimize effects of supplemental stocking on the genetic integrity of native paddlefish populations. We review previous genetic work on paddlefish and described key principles and concepts associated with maintaining genetic diversity within and among paddlefish populations and also present a genetic case study of current paddlefish propagation at the U.S. Fish and Wildlife Service Gavins Point National Fish Hatchery. This study confirmed that three potential sources of broodfish were genetically indistinguishable at the loci examined, allowing the management agencies cooperating on this program flexibility in sampling gametes. This study also showed significant bias in the hatchery occurred in terms of male reproductive contribution, which resulted in a shift in the genetic diversity of progeny compared to the broodfish. This shift was shown to result from differential male contributions, partially attributed to the mode of egg fertilization. Genetic insights enable implementation of a paddlefish propagation program within an adaptive management strategy that conserves inherent genetic diversity while achieving demographic goals.

  2. Reconciling biodiversity and carbon conservation.

    Science.gov (United States)

    Thomas, Chris D; Anderson, Barbara J; Moilanen, Atte; Eigenbrod, Felix; Heinemeyer, Andreas; Quaife, Tristan; Roy, David B; Gillings, Simon; Armsworth, Paul R; Gaston, Kevin J

    2013-05-01

    Climate change is leading to the development of land-based mitigation and adaptation strategies that are likely to have substantial impacts on global biodiversity. Of these, approaches to maintain carbon within existing natural ecosystems could have particularly large benefits for biodiversity. However, the geographical distributions of terrestrial carbon stocks and biodiversity differ. Using conservation planning analyses for the New World and Britain, we conclude that a carbon-only strategy would not be effective at conserving biodiversity, as have previous studies. Nonetheless, we find that a combined carbon-biodiversity strategy could simultaneously protect 90% of carbon stocks (relative to a carbon-only conservation strategy) and > 90% of the biodiversity (relative to a biodiversity-only strategy) in both regions. This combined approach encapsulates the principle of complementarity, whereby locations that contain different sets of species are prioritised, and hence disproportionately safeguard localised species that are not protected effectively by carbon-only strategies. It is efficient because localised species are concentrated into small parts of the terrestrial land surface, whereas carbon is somewhat more evenly distributed; and carbon stocks protected in one location are equivalent to those protected elsewhere. Efficient compromises can only be achieved when biodiversity and carbon are incorporated together within a spatial planning process. © 2012 John Wiley & Sons Ltd/CNRS.

  3. Laser techniques in conservation in Russia

    International Nuclear Information System (INIS)

    Parfenov, Vadim

    2009-01-01

    The introduction of laser technologies into the field of art conservation, which was started more than thirty years ago in Italy, has revolutionary changed this field in many countries around the world. Though the dissemination of lasers in conservation in Russia goes slowly, it has a long and interesting history. This paper describes early projects concerned with the use of lasers in Cultural Heritage preservation and presents review of most important recent Russian case studies. (Author)

  4. Using Remotely Sensed Data for Climate Change Mitigation and Adaptation: A Collaborative Effort Between the Climate Change Adaptation Science Investigators Workgroup (CASI), NASA Johnson Space Center, and Jacobs Technology

    Science.gov (United States)

    Jagge, Amy

    2016-01-01

    With ever changing landscapes and environmental conditions due to human induced climate change, adaptability is imperative for the long-term success of facilities and Federal agency missions. To mitigate the effects of climate change, indicators such as above-ground biomass change must be identified to establish a comprehensive monitoring effort. Researching the varying effects of climate change on ecosystems can provide a scientific framework that will help produce informative, strategic and tactical policies for environmental adaptation. As a proactive approach to climate change mitigation, NASA tasked the Climate Change Adaptation Science Investigators Workgroup (CASI) to provide climate change expertise and data to Center facility managers and planners in order to ensure sustainability based on predictive models and current research. Generation of historical datasets that will be used in an agency-wide effort to establish strategies for climate change mitigation and adaptation at NASA facilities is part of the CASI strategy. Using time series of historical remotely sensed data is well-established means of measuring change over time. CASI investigators have acquired multispectral and hyperspectral optical and LiDAR remotely sensed datasets from NASA Earth Observation Satellites (including the International Space Station), airborne sensors, and astronaut photography using hand held digital cameras to create a historical dataset for the Johnson Space Center, as well as the Houston and Galveston area. The raster imagery within each dataset has been georectified, and the multispectral and hyperspectral imagery has been atmospherically corrected. Using ArcGIS for Server, the CASI-Regional Remote Sensing data has been published as an image service, and can be visualized through a basic web mapping application. Future work will include a customized web mapping application created using a JavaScript Application Programming Interface (API), and inclusion of the CASI data

  5. Conservation Documentation and the Implications of Digitisation

    Directory of Open Access Journals (Sweden)

    Michelle Moore

    2001-11-01

    Full Text Available Conservation documentation can be defined as the textual and visual records collected during the care and treatment of an object. It can include records of the object's condition, any treatment done to the object, any observations or conclusions made by the conservator as well as details on the object's past and present environment. The form of documentation is not universally agreed upon nor has it always been considered an important aspect of the conservation profession. Good documentation tells the complete story of an object thus far and should provide as much information as possible for the future researcher, curator, or conservator. The conservation profession will benefit from digitising its documentation using software such as databases and hardware like digital cameras and scanners. Digital technology will make conservation documentation more easily accessible, cost/time efficient, and will increase consistency and accuracy of the recorded data, and reduce physical storage space requirements. The major drawback to digitising conservation records is maintaining access to the information for the future; the notorious pace of technological change has serious implications for retrieving data from any machine- readable medium.

  6. Modern technology for electric power conservation

    International Nuclear Information System (INIS)

    Smith, C.B.

    1989-01-01

    Recent discoveries concerning the nature of the atmosphere have reinforced the importance of optimal resource utilization. These global considerations may seem far from the ken of the factory manager, whose daily concern is getting out the product, keeping the plant running, and trying to keep his/her production costs below those of the competition. (author)

  7. Built heritage monitoring conservation management

    CERN Document Server

    Boriani, Maurizio; Guidi, Gabriele

    2015-01-01

    This book provides a comprehensive, up-to-date overview on the most pressing issues in the conservation and management of archaeological, architectural, and urban landscapes. Multidisciplinary research is presented on a wide range of built heritage sites, from archaeological ruins and historic centers through to twentieth century and industrial architectural heritage. The role of ICT and new technologies, including those used for digital archiving, surveying, modeling, and monitoring, is extensively discussed, in recognition of their importance for professionals working in the field. Detailed attention is also paid to materials and treatments employed in preventive conservation and management. With contributions from leading experts, including university researchers, professionals, and policy makers, the book will be invaluable for all who seek to understand, and solve, the challenges faced in the protection and enhancement of the built heritage.

  8. A Compendium of Energy Conservation Success Stories

    Science.gov (United States)

    1988-09-01

    Three-quarters of DOE's Conservation R and D funds have been devoted to technology research and development: basic and applied research, exploratory R and D, engineering feasibility studies, pilot-scale prototype R and D, and technology demonstration. Non R and D projects have involved technology assessment program planning and analysis, model development, technology transfer and consumer information, health effects and safety research, and technical support for rule making. The success stories summarized in this compendium fall into three general categories: Completed Technology Success Stories, projects that have resulted in new energy-saving technologies that are presently being used in the private sector; Technical Success Stories, projects that have produced or disseminated important scientific/technical information likely to result in future energy savings; Program Success Stories, non-R and D activities that have resulted in nationally significant energy benefits. The Energy Conservation research and development program at DOE is managed by the Office of Conservation under the direction of the Deputy Assistant Secretary for Conservation. Three subordinate Program Offices correspond to the buildings, transportation, and industrial end-use sectors. A fourth subordinate Program Office{endash}Energy Utilization Research{endash}sponsors research and technical inventions for all end-use sectors.

  9. A compendium of energy conservation success stories

    Energy Technology Data Exchange (ETDEWEB)

    1988-09-01

    Three-quarters of DOE's Conservation R and D funds have been devoted to technology research and development: basic and applied research, exploratory R and D, engineering feasibility studies, pilot-scale prototype R and D, and technology demonstration. Non R and D projects have involved technology assessment program planning and analysis, model development, technology transfer and consumer information, health effects and safety research, and technical support for rule making. The success stories summarized in this compendium fall into three general categories: Completed Technology Success Stories, projects that have resulted in new energy-saving technologies that are presently being used in the private sector; Technical Success Stories, projects that have produced or disseminated important scientific/technical information likely to result in future energy savings; Program Success Stories, non-R and D activities that have resulted in nationally significant energy benefits. The Energy Conservation research and development program at DOE is managed by the Office of Conservation under the direction of the Deputy Assistant Secretary for Conservation. Three subordinate Program Offices correspond to the buildings, transportation, and industrial end-use sectors. A fourth subordinate Program Office/endash/Energy Utilization Research/endash/sponsors research and technical inventions for all end-use sectors.

  10. Climate change beliefs, risk perceptions, and adaptation behavior among Midwestern U.S. crop farmers

    Directory of Open Access Journals (Sweden)

    Amber Saylor Mase

    2017-01-01

    Full Text Available Global climate change presents unique challenges to the resilience of United States agriculture, and farmers and advisors must utilize effective adaptation strategies to be both economically and environmentally sustainable. This study addresses Midwestern U.S. crop farmers’ beliefs about climate change, perceived risks from weather and climate, and attitudes toward adaptation that influence their decisions to adopt adaptation strategies. Analyzing a 2012 survey of nearly 5000 corn farmers across 22 Midwestern U.S. Watersheds, we investigate the most common weather and climate risk management strategies, including purchasing additional crop insurance, implementing conservation practices, and adding new technology. U.S. farmers’ belief in anthropogenic climate change, perceptions of changing weather patterns, climate risks to their farm and attitudes toward adapting are analyzed. Farmers’ perceptions of risk to their own farm, attitudes toward innovation and adaptation attitudes were the most important determinants of adaptation. This study highlights the critical role of risk perceptions in adaptation attitudes as well as behaviors among agriculturalists. Finally, we discuss how these findings could be applied to increase uptake of adaptation strategies and thus resilience of U.S. agriculture to a changing climate.

  11. ADAPT Dataset

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Diagnostics and Prognostics Testbed (ADAPT) Project Lead: Scott Poll Subject Fault diagnosis in electrical power systems Description The Advanced...

  12. Econometric modelling of conservation

    International Nuclear Information System (INIS)

    Parker, J.C.; Seal, D.J.

    1990-01-01

    The issue of energy conservation in general, and conservation in the natural gas markets in particular, has recently had a much lower profile than in the past, when energy prices were significantly higher and energy costs composed a much larger proportion of industrial operating costs than today. The recent downward trend in energy prices has diverted attention away from this issue. In the face of expected significant real price increases, increasing pressure from environmental groups, and directives on the part of regulator authorities, conservation is once again becoming a topic of consideration in the energy industry. From the point of view of gas demand forecasting, conservation has received too little attention. The intentions of this paper are to establish the need for forecasting conservation in the natural gas utility sector, and to construct a model of industrial demand which incorporates conservation and is appropriate for use as a forecasting tool

  13. Handbook on energy conservation

    International Nuclear Information System (INIS)

    1989-12-01

    This book shows energy situation in recent years, which includes reserves of energy resource in the world, crude oil production records in OPEC and non OPEC, supply and demand of energy in important developed countries, prospect of supply and demand of energy and current situation of energy conservation in developed countries. It also deals with energy situation in Korea reporting natural resources status, energy conservation policy, measurement for alternative energy, energy management of Korea, investment in equipment and public education for energy conservation.

  14. The genetics and conservation of Araucaria angustifolia: I. Genetic structure and diversity of natural populations by means of non-adaptive variation in the state of Santa Catarina, Brazil

    Directory of Open Access Journals (Sweden)

    Neiva Maria Frizon Auler

    2002-01-01

    Full Text Available The objective of this study was to generate information relative to the allele distribution and dynamics within and among populations of Araucaria angustifolia, a naturally-occurring conifer in the south of Brazil, being known popularly as "pinheiro-do-Paraná", "araucaria" or pine tree. In order to elucidate the levels and the distribution of the genetic variability, the population's genetic structure and the genetic distance among natural populations of this species with different levels of disturbance in different geographical areas were studied in detail. For this, samples of leaf tissue were collected from 328 adult individuals in nine natural populations in Santa Catarina State. To analyze the samples, the allozyme technique was applied in starch gel electrophoresis (penetrose 13%, with citrate/morfholine buffer. Nine enzymatic systems (PGM, PGI MDH, PRX, SKDH, 6PGDH, ACP, IDH and G6PDH revealed 15 loci. The analysis provided values for He and Ho of 0.084 and 0.072, respectively. The general average of polymorphic loci was 73% in the species and 26.6% in the studied populations and the allele number per locus was 1.6. Wright's F-statistical estimates indicated the existence of inbreeding in populations (F IS= 0.148 and a low divergence among populations (F ST = 0.044. However, the inbreeding values were variable in different populations. Taken together, the results indicated that the greater part of the genetic variability is contained within populations. The working hypothesis that originally there was greater genetic diversity can be supported by these results which indicate that in the degraded populations the diversity indexes are lower in the degraded populations than those found in better-conserved populations. Thus the fragmentation of the forest followed by "araucaria" exploitation could have contributed to the genetic differentiation expressed through the allele frequency of the studied population.

  15. Wildlife conservation and reproductive cloning.

    Science.gov (United States)

    Holt, William V; Pickard, Amanda R; Prather, Randall S

    2004-03-01

    Reproductive cloning, or the production of offspring by nuclear transfer, is often regarded as having potential for conserving endangered species of wildlife. Currently, however, low success rates for reproductive cloning limit the practical application of this technique to experimental use and proof of principle investigations. In this review, we consider how cloning may contribute to wildlife conservation strategies. The cloning of endangered mammals presents practical problems, many of which stem from the paucity of knowledge about their basic reproductive biology. However, situations may arise where resources could be targeted at recovering lost or under-represented genetic lines; these could then contribute to the future fitness of the population. Approaches of this type would be preferable to the indiscriminate generation of large numbers of identical individuals. Applying cloning technology to non-mammalian vertebrates may be more practical than attempting to use conventional reproductive technologies. As the scientific background to cloning technology was pioneered using amphibians, it may be possible to breed imminently threatened amphibians, or even restore extinct amphibian species, by the use of cloning. In this respect species with external embryonic development may have an advantage over mammals as developmental abnormalities associated with inappropriate embryonic reprogramming would not be relevant.

  16. Waterfowl populations of conservation concern: learning from diverse challenges, models, and conservation strategies

    Science.gov (United States)

    Austin, Jane E.; Slattery, Stuart; Clark, Robert G.

    2014-01-01

    There are 30 threatened or endangered species of waterfowl worldwide, and several sub-populations are also threatened. Some of these species occur in North America, and others there are also of conservation concern due to declining population trends and their importance to hunters. Here we review conservation initiatives being undertaken for several of these latter species, along with conservation measures in place in Europe, to seek common themes and approaches that could be useful in developing broad conservation guidelines. While focal species may vary in their life histories, population threats and geopolitical context, most conservation efforts have used a systematic approach to understand factors limiting populations and o identify possible management or policy actions. This approach generally includes a priori identification of plausible hypotheses about population declines or status, incorporation of hypotheses into conceptual or quantitative planning models, and the use of some form of structured decision making and adaptive management to develop and implement conservation actions in the face of many uncertainties. A climate of collaboration among jurisdictions sharing these birds is important to the success of a conservation or management programme. The structured conservation approach exemplified herein provides an opportunity to involve stakeholders at all planning stages, allows for all views to be examined and incorporated into model structures, and yields a format for improved communication, cooperation and learning, which may ultimately be one of the greatest benefits of this strategy.

  17. Ambiguous Adaptation

    DEFF Research Database (Denmark)

    Møller Larsen, Marcus; Lyngsie, Jacob

    2017-01-01

    We investigate the connection between contract duration, relational mechanisms, and premature relationship termination. Based on an analysis of a large sample of exchange relationships in the global service-provider industry, we argue that investments in either longer contract duration or more in...... ambiguous reference points for adaption and thus increase the likelihood of premature termination by restricting the parties' set of adaptive actions....

  18. Climate adaptation

    Science.gov (United States)

    Kinzig, Ann P.

    2015-03-01

    This paper is intended as a brief introduction to climate adaptation in a conference devoted otherwise to the physics of sustainable energy. Whereas mitigation involves measures to reduce the probability of a potential event, such as climate change, adaptation refers to actions that lessen the impact of climate change. Mitigation and adaptation differ in other ways as well. Adaptation does not necessarily have to be implemented immediately to be effective; it only needs to be in place before the threat arrives. Also, adaptation does not necessarily require global, coordinated action; many effective adaptation actions can be local. Some urban communities, because of land-use change and the urban heat-island effect, currently face changes similar to some expected under climate change, such as changes in water availability, heat-related morbidity, or changes in disease patterns. Concern over those impacts might motivate the implementation of measures that would also help in climate adaptation, despite skepticism among some policy makers about anthropogenic global warming. Studies of ancient civilizations in the southwestern US lends some insight into factors that may or may not be important to successful adaptation.

  19. Biodiversity Conservation and Conservation Biotechnology Tools

    Science.gov (United States)

    This special issue is dedicated to the in vitro tools and methods used to conserve the genetic diversity of rare and threatened species from around the world. Species that are on the brink of extinction, due to the rapid loss of genetic diversity and habitat, come mainly from resource poor areas the...

  20. European information on climate change impacts, vulnerability and adaptation

    Science.gov (United States)

    Jol, A.; Isoard, S.

    2010-09-01

    Vulnerability to natural and technological disasters is increasing due to a combination of intensifying land use, increasing industrial development, further urban expansion and expanding infrastructure and also climate change. At EU level the European Commission's White Paper on adaptation to climate change (published in 2009) highlights that adaptation actions should be focused on the most vulnerable areas and communities in Europe (e.g. mountains, coastal areas, river flood prone areas, Mediterranean, Arctic). Mainstreaming of climate change into existing EU policies will be a key policy, including within the Water Framework Directive, Marine Strategy Framework Directive, Nature protection and biodiversity policies, integrated coastal zone management, other (sectoral) policies (agriculture, forestry, energy, transport, health) and disaster risk prevention. 2010 is the international year on biodiversity and the Conference of Parties of the biodiversity convention will meet in autumn 2010 (Japan) to discuss amongst other post-2010 strategies, objectives and indicators. Both within the Biodiversity Convention (CBD) and the Climate Change Convention (UNFCCC) there is increasing recognition of the need for integration of biodiversity conservation into climate change mitigation and adaptation activities. Furthermore a number of European countries and also some regions have started to prepare and/or have adopted national adaptation plans or frameworks. Sharing of good practices on climate change vulnerability methods and adaptation actions is so far limited, but is essential to improve such plans, at national, sub national and local level where much of the adaptation action is already taking place and will be expanding in future, also involving increasingly the business community. The EU Clearinghouse on CC impacts, vulnerability and adaptation should address these needs and it is planned to be operational end of 2011. The EEA is expected to have a role in its